WorldWideScience

Sample records for core group approach

  1. The use of CORE model by metacognitive skill approach in developing characters junior high school students

    Science.gov (United States)

    Fisher, Dahlia; Yaniawati, Poppy; Kusumah, Yaya Sukjaya

    2017-08-01

    This study aims to analyze the character of students who obtain CORE learning model using metacognitive approach. The method in this study is qualitative research and quantitative research design (Mixed Method Design) with concurrent embedded strategy. The research was conducted on two groups: an experimental group and the control group. An experimental group consists of students who had CORE model learning using metacognitive approach while the control group consists of students taught by conventional learning. The study was conducted the object this research is the seventh grader students in one the public junior high schools in Bandung. Based on this research, it is known that the characters of the students in the CORE model learning through metacognitive approach is: honest, hard work, curious, conscientious, creative and communicative. Overall it can be concluded that CORE model learning is good for developing characters of a junior high school student.

  2. Few-Group Transport Analysis of the Core-Reflector Problem in Fast Reactor Cores via Equivalent Group Condensation and Local/Global Iteration

    International Nuclear Information System (INIS)

    Won, Jong Hyuck; Cho, Nam Zin

    2011-01-01

    In deterministic neutron transport methods, a process called fine-group to few-group condensation is used to reduce the computational burden. However, recent results on the core-reflector problem in fast reactor cores show that use of a small number of energy groups has limitation to describe neutron flux around core reflector interface. Therefore, researches are still ongoing to overcome this limitation. Recently, the authors proposed I) direct application of equivalently condensed angle-dependent total cross section to discrete ordinates method to overcome the limitation of conventional multi-group approximations, and II) local/global iteration framework in which fine-group discrete ordinates calculation is used in local problems while few-group transport calculation is used in the global problem iteratively. In this paper, an analysis of the core-reflector problem is performed in few-group structure using equivalent angle-dependent total cross section with local/global iteration. Numerical results are obtained under S 12 discrete ordinates-like transport method with scattering cross section up to P1 Legendre expansion

  3. Ultrasound-guided diagnostic breast biopsy methodology: retrospective comparison of the 8-gauge vacuum-assisted biopsy approach versus the spring-loaded 14-gauge core biopsy approach

    Science.gov (United States)

    2011-01-01

    Background Ultrasound-guided diagnostic breast biopsy technology represents the current standard of care for the evaluation of indeterminate and suspicious lesions seen on diagnostic breast ultrasound. Yet, there remains much debate as to which particular method of ultrasound-guided diagnostic breast biopsy provides the most accurate and optimal diagnostic information. The aim of the current study was to compare and contrast the 8-gauge vacuum-assisted biopsy approach and the spring-loaded 14-gauge core biopsy approach. Methods A retrospective analysis was done of all ultrasound-guided diagnostic breast biopsy procedures performed by either the 8-gauge vacuum-assisted biopsy approach or the spring-loaded 14-gauge core biopsy approach by a single surgeon from July 2001 through June 2009. Results Among 1443 ultrasound-guided diagnostic breast biopsy procedures performed, 724 (50.2%) were by the 8-gauge vacuum-assisted biopsy technique and 719 (49.8%) were by the spring-loaded 14-gauge core biopsy technique. The total number of false negative cases (i.e., benign findings instead of invasive breast carcinoma) was significantly greater (P = 0.008) in the spring-loaded 14-gauge core biopsy group (8/681, 1.2%) as compared to in the 8-gauge vacuum-assisted biopsy group (0/652, 0%), with an overall false negative rate of 2.1% (8/386) for the spring-loaded 14-gauge core biopsy group as compared to 0% (0/148) for the 8-gauge vacuum-assisted biopsy group. Significantly more (P guided diagnostic breast biopsy procedure. Significantly more (P guided diagnostic breast biopsy procedure. Conclusions In appropriately selected cases, the 8-gauge vacuum-assisted biopsy approach appears to be advantageous to the spring-loaded 14-gauge core biopsy approach for providing the most accurate and optimal diagnostic information. PMID:21835024

  4. A novel approach to preparing magnetic protein microspheres with core-shell structure

    Energy Technology Data Exchange (ETDEWEB)

    Jiang Wei, E-mail: climentjw@126.co [National Special Superfine Powder Engineering Research Center, Nanjing University of Science and Technology, Nanjing 210094 (China); Sun Zhendong; Li Fengsheng [National Special Superfine Powder Engineering Research Center, Nanjing University of Science and Technology, Nanjing 210094 (China); Chen Kai; Liu Tianyu; Liu Jialing [Department of Physics, Nanjing University of Science and Technology, Nanjing 210094 (China); Zhou Tianle [Department of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing 210094 (China); Guo Rui [Department of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094 (China)

    2011-03-15

    Magnetic protein microspheres with core-shell structure were prepared through a novel approach based on the sonochemical method and the emulsion solvent evaporation method. The microspheres are composed of the oleic acid and undecylenic acid modified Fe{sub 3}O{sub 4} cores and coated with globular bovine serum albumin (BSA). Under an optimized condition, up to 57.8 wt% of approximately 10 nm superparamagnetic Fe{sub 3}O{sub 4} nanoparticles could be uniformly encapsulated into the BSA microspheres with the diameter of approximately 160 nm and the high saturation magnetization of 38.5 emu/g, besides of the abundant functional groups. The possible formation mechanism of magnetic microspheres was discussed in detail. - Research Highlights: Magnetic protein microspheres with core-shell structure were prepared through a novel approach based on the sonochemical method and the emulsion solvent evaporation method. The microspheres are composed of the oleic acid and undecylenic acid modified Fe{sub 3}O{sub 4} cores and coated with globular bovine serum albumin (BSA). 57.8 wt% of approximately 10 nm superparamagnetic Fe{sub 3}O{sub 4} nanoparticles could be uniformly encapsulated into the BSA microspheres with the diameter of approximately 160 nm and the high saturation magnetization of 38.5 emu/g, besides the abundant functional groups.

  5. A novel approach to preparing magnetic protein microspheres with core-shell structure

    International Nuclear Information System (INIS)

    Jiang Wei; Sun Zhendong; Li Fengsheng; Chen Kai; Liu Tianyu; Liu Jialing; Zhou Tianle; Guo Rui

    2011-01-01

    Magnetic protein microspheres with core-shell structure were prepared through a novel approach based on the sonochemical method and the emulsion solvent evaporation method. The microspheres are composed of the oleic acid and undecylenic acid modified Fe 3 O 4 cores and coated with globular bovine serum albumin (BSA). Under an optimized condition, up to 57.8 wt% of approximately 10 nm superparamagnetic Fe 3 O 4 nanoparticles could be uniformly encapsulated into the BSA microspheres with the diameter of approximately 160 nm and the high saturation magnetization of 38.5 emu/g, besides of the abundant functional groups. The possible formation mechanism of magnetic microspheres was discussed in detail. - Research Highlights: → Magnetic protein microspheres with core-shell structure were prepared through a novel approach based on the sonochemical method and the emulsion solvent evaporation method.→ The microspheres are composed of the oleic acid and undecylenic acid modified Fe 3 O 4 cores and coated with globular bovine serum albumin (BSA).→ 57.8 wt% of approximately 10 nm superparamagnetic Fe 3 O 4 nanoparticles could be uniformly encapsulated into the BSA microspheres with the diameter of approximately 160 nm and the high saturation magnetization of 38.5 emu/g, besides the abundant functional groups.

  6. Core group approach to identify college students at risk for sexually transmitted infections "Core group" para identificar universitários em risco para infecções sexualmente transmissíveis

    Directory of Open Access Journals (Sweden)

    Miguel A Sánchez-Alemán

    2008-06-01

    Full Text Available OBJECTIVE: To analyze the core group for sexually transmitted infections (STI among college students. METHODS: Cross-sectional study carried out in a convenience sample comprising 711 college students of the public university of Morelos, Mexico, between 2001 and 2003. Sociodemographic and sexual behavior information were collected using self-applied questionnaires. Herpes simplex 2 (HSV-2 infection was tested in the blood. The number of sexual partners in the last year and cocaine consumption were used as indicators to construct the dependent variable "level of STI risk" in three categories: low, medium and high risk (core group. A multinomial analysis was conducted to evaluate whether different sex behaviors were associated with the variable "level of STI risk". RESULTS: There was significant association between HSV-2 seroprevalence and the variable "level of STI risk": 13%, 5.6% and 3.8% were found in high (core group, medium and low categories, respectively. There were gender differences regarding the core group. Men started having sexual intercourse earlier, had more sex partners, higher alcohol and drug consumption, higher frequency of sex intercourse with sex workers, exchanging sex for money, occasional and concurrent partners compared to women. CONCLUSIONS: The study findings suggest existing contextual characteristics in the study population that affect their sex behavior. In Mexico, the cultural conception of sexuality is determined mainly by gender differences where men engage in higher risky sexual behavior than women.OBJETIVO: Identificar al grupo core de infecciones de transmisión sexual (ITS en una población de estudiantes universitarios mexicanos. MÉTODOS: Se realizó un estudio transversal en una muestra por conveniencia que incluyó 711 estudiantes de una universidad pública de Morelos, México, entre 2001 y 2003. Las características sociodemográficas y de comportamiento sexual se obtuvieron mediante un cuestionario auto

  7. Groups, matrices, and vector spaces a group theoretic approach to linear algebra

    CERN Document Server

    Carrell, James B

    2017-01-01

    This unique text provides a geometric approach to group theory and linear algebra, bringing to light the interesting ways in which these subjects interact. Requiring few prerequisites beyond understanding the notion of a proof, the text aims to give students a strong foundation in both geometry and algebra. Starting with preliminaries (relations, elementary combinatorics, and induction), the book then proceeds to the core topics: the elements of the theory of groups and fields (Lagrange's Theorem, cosets, the complex numbers and the prime fields), matrix theory and matrix groups, determinants, vector spaces, linear mappings, eigentheory and diagonalization, Jordan decomposition and normal form, normal matrices, and quadratic forms. The final two chapters consist of a more intensive look at group theory, emphasizing orbit stabilizer methods, and an introduction to linear algebraic groups, which enriches the notion of a matrix group. Applications involving symm etry groups, determinants, linear coding theory ...

  8. A HYBRID GENETIC ALGORITHM-NEURAL NETWORK APPROACH FOR PRICING CORES AND REMANUFACTURED CORES

    Directory of Open Access Journals (Sweden)

    M. Seidi

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT:Sustainability has become a major issue in most economies, causing many leading companies to focus on product recovery and reverse logistics. Remanufacturing is an industrial process that makes used products reusable. One of the important aspects in both reverse logistics and remanufacturing is the pricing of returned and remanufactured products (called cores. In this paper, we focus on pricing the cores and remanufactured cores. First we present a mathematical model for this purpose. Since this model does not satisfy our requirements, we propose a simulation optimisation approach. This approach consists of a hybrid genetic algorithm based on a neural network employed as the fitness function. We use automata learning theory to obtain the learning rate required for training the neural network. Numerical results demonstrate that the optimal value of the acquisition price of cores and price of remanufactured cores is obtained by this approach.

    AFRIKAANSE OPSOMMING: Volhoubaarheid het ‘n belangrike saak geword in die meeste ekonomieë, wat verskeie maatskappye genoop het om produkherwinning en omgekeerde logistiek te onder oë te neem. Hervervaardiging is ‘n industriële proses wat gebruikte produkte weer bruikbaar maak. Een van die belangrike aspekte in beide omgekeerde logistiek en hervervaardiging is die prysbepaling van herwinne en hervervaardigde produkte. Hierdie artikel fokus op die prysbepalingsaspekte by wyse van ‘n wiskundige model.

  9. An improved one-and-a-half group BWR core simulator for a new-generation core management system

    International Nuclear Information System (INIS)

    Iwamoto, Tatsuya; Yamamoto, Munenari

    2000-01-01

    An improved one-and-a-half group core simulator method for a next-generation BWR core management system is presented. In the improved method, intranodal spectral index (thermal to fast flux ratio) is expanded with analytic solutions to the diffusion equation, and the nodal power density and the interface net current are calculated, taking the intranodal flux shape into consideration. A unique method was developed for assembly heterogeneity correction. Thus eliminating the insufficiencies of the conventional one-and-a-half group method, we can have accurate power distributions as well as local peaking factors for cores having large spectral mismatch between fuel assemblies. The historical effects of spectral mismatch are also considered in both nodal power and local peaking calculations. Although reflectors are not solved explicitly, there is essentially no need for core dependent adjustable parameters, since boundary conditions are derived in the same manner as in the interior nodes. Calculation time for nodal solutions is comparable to that for the conventional method, and is less than 1/10 of a few-group nodal simulator. Verifications of the present method were made by comparing the results with those obtained by heterogeneous fine-mesh multi-group core depletion calculations, and the accuracy was shown to be fairly good. (author)

  10. Core level shifts in group IV semiconductors and semimetals

    International Nuclear Information System (INIS)

    Yin, S.; Tosatti, E.

    1981-08-01

    We calculate the core level binding energy shift from the isolated atom to the crystalline solid, for group IV elemental semiconductors. This is done by simple extension of Johansson and Martensson's scheme for metals. We show that the core level energy in a nonmetal must be measured by the photo absorption (''core exciton'') threshold rather than by photo emission. As a byproduct, a simple scheme is also devised to evaluate impurity heats of solutions in semiconductors. (author)

  11. NMR-MPar: A Fault-Tolerance Approach for Multi-Core and Many-Core Processors

    Directory of Open Access Journals (Sweden)

    Vanessa Vargas

    2018-03-01

    Full Text Available Multi-core and many-core processors are a promising solution to achieve high performance by maintaining a lower power consumption. However, the degree of miniaturization makes them more sensitive to soft-errors. To improve the system reliability, this work proposes a fault-tolerance approach based on redundancy and partitioning principles called N-Modular Redundancy and M-Partitions (NMR-MPar. By combining both principles, this approach allows multi-/many-core processors to perform critical functions in mixed-criticality systems. Benefiting from the capabilities of these devices, NMR-MPar creates different partitions that perform independent functions. For critical functions, it is proposed that N partitions with the same configuration participate of an N-modular redundancy system. In order to validate the approach, a case study is implemented on the KALRAY Multi-Purpose Processing Array (MPPA-256 many-core processor running two parallel benchmark applications. The traveling salesman problem and matrix multiplication applications were selected to test different device’s resources. The effectiveness of NMR-MPar is assessed by software-implemented fault-injection. For evaluation purposes, it is considered that the system is intended to be used in avionics. Results show the improvement of the application reliability by two orders of magnitude when implementing NMR-MPar on the system. Finally, this work opens the possibility to use massive parallelism for dependable applications in embedded systems.

  12. HEXAB-3D, 3-D Few-Group Diffusion for Hexagonal Core Geometry

    International Nuclear Information System (INIS)

    Apostolov, T.G.; Ivanov, K.N.; Manolova, M.A.

    2002-01-01

    1 - Description of program or function: A three-dimensional few-group calculational model based on diffusion theory has been developed for calculating the basic neutron physical characteristics of power reactors which have a hexagonal core configuration with a heterogeneous region structure in axial direction. There are two versions of the model: - HEXAB-III-30 - the solution range in horizontal plane is 30 - sector of reactor core - HEXAB-III-360 - the solution range in horizontal plane is full core. 2 - Method of solution: In the HEXAB-3D code the nine-point mesh-centered finite-difference approximation of neutron diffusion equation is applied. The standard inner-outer iterative strategy is used. Inner iterations are solved using two different incomplete factorization techniques: AGA two-sweep iterative method and modified AGA two-sweep iterative method both accelerated by the double successive over-relaxation procedure. The power method, combined with two- or three-term Chebishev polynomial acceleration for outer iterations is applied in the code. To improve the accuracy of the calculated integral and local reactor parameters without significantly increasing computer time and storage an effective approach has been developed. It decreases errors due to the use of coarse mesh by means of correcting the coefficients of finite- difference scheme. 3 - Restrictions on the complexity of the problem: Maximum of 10 energy groups, 30 horizontal layers and 100 material compositions

  13. Comparison of serpent and triton generated FEW group constants for APR1400 nuclear reactor core

    International Nuclear Information System (INIS)

    Elsawi, Mohamed A.; Alnoamani, Zainab

    2015-01-01

    The accuracy of full-core reactor power calculations using diffusion codes is strongly dependent on the quality of the homogenized cross sections and other few-group constants generated by lattice codes. For many years, deterministic lattice codes have been used to generate these constants using different techniques: the discrete ordinates, collision probability or the method of characteristics, just to name a few. These codes, however, show some limitations, for example, on complex geometries or near heavy absorbers as in modern pressurized water reactor (PWR) designs like the Korean Advanced Power Reactor 1400 (APR1400) core. The use of continuous-energy Monte Carlo (MC) codes to produce nuclear constants can be seen as an attractive option when dealing with fuel or reactor types that lie beyond the capabilities of conventional deterministic lattice transport codes. In this paper, the few-group constants generated by two of the state-of-the-art reactor physics codes, SERPENT and SCALE/TRITON, will be critically studied and their reliability for being used in subsequent diffusion calculations will be evaluated. SERPENT is a 3D, continuous-energy, Monte Carlo reactor physics code which has a built-in burn-up calculation capability. It has been developed at the Technical Research Center of Finland (VTT) since 2004. SCALE/TRITON, on the other hand, is a control module developed within the framework of SCALE package that enables performing deterministic 2-D transport calculations on nuclear reactor core lattices. The approach followed in this paper is as follows. First, the few-group nuclear constants for the APR1400 reactor core were generated using SERPENT (version 2.1.22) and NEWT (in SCALE version 6.1.2) codes. For both codes, the critical spectrum, calculated using the B1 method, was used as a weighting function. Second, 2-D diffusion calculations were performed using the US NRC core simulator PARCS employing the two few-group constant sets generated in the first

  14. Hunton Group core workshop and field trip

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, K.S. [ed.

    1993-12-31

    The Late Ordovician-Silurian-Devonian Hunton Group is a moderately thick sequence of shallow-marine carbonates deposited on the south edge of the North American craton. This rock unit is a major target for petroleum exploration and reservoir development in the southern Midcontinent. The workshop described here was held to display cores, outcrop samples, and other reservoir-characterization studies of the Hunton Group and equivalent strata throughout the region. A field trip was organized to complement the workshop by allowing examination of excellent outcrops of the Hunton Group of the Arbuckle Mountains.

  15. A multi-level surface rebalancing approach for efficient convergence acceleration of 3D full core multi-group fine grid nodal diffusion iterations

    International Nuclear Information System (INIS)

    Geemert, René van

    2014-01-01

    Highlights: • New type of multi-level rebalancing approach for nodal transport. • Generally improved and more mesh-independent convergence behavior. • Importance for intended regime of 3D pin-by-pin core computations. - Abstract: A new multi-level surface rebalancing (MLSR) approach has been developed, aimed at enabling an improved non-linear acceleration of nodal flux iteration convergence in 3D steady-state and transient reactor simulation. This development is meant specifically for anticipating computational needs for solving envisaged multi-group diffusion-like SP N calculations with enhanced mesh resolution (i.e. 3D multi-box up to 3D pin-by-pin grid). For the latter grid refinement regime, the previously available multi-level coarse mesh rebalancing (MLCMR) strategy has been observed to become increasingly inefficient with increasing 3D mesh resolution. Furthermore, for very fine 3D grids that feature a very fine axial mesh as well, non-convergence phenomena have been observed to emerge. In the verifications pursued up to now, these problems have been resolved by the new approach. The novelty arises from taking the interface current balance equations defined over all Cartesian box edges, instead of the nodal volume-integrated process-rate balance equation, as an appropriate restriction basis for setting up multi-level acceleration of fine grid interface current iterations. The new restriction strategy calls for the use of a newly derived set of adjoint spectral equations that are needed for computing a limited set of spectral response vectors per node. This enables a straightforward determination of group-condensed interface current spectral coupling operators that are of crucial relevance in the new rebalancing setup. Another novelty in the approach is a new variational method for computing the neutronic eigenvalue. Within this context, the latter is treated as a control parameter for driving another, newly defined and numerically more fundamental

  16. A novel approach to preparing magnetic protein microspheres with core-shell structure

    Science.gov (United States)

    Jiang, Wei; Sun, Zhendong; Li, Fengsheng; Chen, Kai; Liu, Tianyu; Liu, Jialing; Zhou, Tianle; Guo, Rui

    2011-03-01

    Magnetic protein microspheres with core-shell structure were prepared through a novel approach based on the sonochemical method and the emulsion solvent evaporation method. The microspheres are composed of the oleic acid and undecylenic acid modified Fe 3O 4 cores and coated with globular bovine serum albumin (BSA). Under an optimized condition, up to 57.8 wt% of approximately 10 nm superparamagnetic Fe 3O 4 nanoparticles could be uniformly encapsulated into the BSA microspheres with the diameter of approximately 160 nm and the high saturation magnetization of 38.5 emu/g, besides of the abundant functional groups. The possible formation mechanism of magnetic microspheres was discussed in detail.

  17. Facile fabrication of siloxane @ poly (methylacrylic acid) core-shell microparticles with different functional groups

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Zheng-Bai; Tai, Li; Zhang, Da-Ming; Jiang, Yong, E-mail: yj@seu.edu.cn [Southeast University, School of Chemistry and Chemical Engineering (China)

    2017-02-15

    Siloxane @ poly (methylacrylic acid) core-shell microparticles with functional groups were prepared by a facile hydrolysis-condensation method in this work. Three different silane coupling agents 3-methacryloxypropyltrimethoxysilane (MPS), 3-triethoxysilylpropylamine (APTES), and 3-glycidoxypropyltrimethoxysilane (GPTMS) were added along with tetraethoxysilane (TEOS) into the polymethylacrylic acid (PMAA) microparticle ethanol dispersion to form the Si@PMAA core-shell microparticles with different functional groups. The core-shell structure and the surface special functional groups of the resulting microparticles were measured by transmission electron microscopy and FTIR. The sizes of these core-shell microparticles were about 350–400 nm. The corresponding preparation conditions and mechanism were discussed in detail. This hydrolysis-condensation method also could be used to functionalize other microparticles which contain active groups on the surface. Meanwhile, the Si@PMAA core-shell microparticles with carbon-carbon double bonds and amino groups have further been applied to prepare hydrophobic coatings.

  18. Facile fabrication of siloxane @ poly (methylacrylic acid) core-shell microparticles with different functional groups

    International Nuclear Information System (INIS)

    Zhao, Zheng-Bai; Tai, Li; Zhang, Da-Ming; Jiang, Yong

    2017-01-01

    Siloxane @ poly (methylacrylic acid) core-shell microparticles with functional groups were prepared by a facile hydrolysis-condensation method in this work. Three different silane coupling agents 3-methacryloxypropyltrimethoxysilane (MPS), 3-triethoxysilylpropylamine (APTES), and 3-glycidoxypropyltrimethoxysilane (GPTMS) were added along with tetraethoxysilane (TEOS) into the polymethylacrylic acid (PMAA) microparticle ethanol dispersion to form the Si@PMAA core-shell microparticles with different functional groups. The core-shell structure and the surface special functional groups of the resulting microparticles were measured by transmission electron microscopy and FTIR. The sizes of these core-shell microparticles were about 350–400 nm. The corresponding preparation conditions and mechanism were discussed in detail. This hydrolysis-condensation method also could be used to functionalize other microparticles which contain active groups on the surface. Meanwhile, the Si@PMAA core-shell microparticles with carbon-carbon double bonds and amino groups have further been applied to prepare hydrophobic coatings.

  19. On-line core monitoring system based on buckling corrected modified one group model

    International Nuclear Information System (INIS)

    Freire, Fernando S.

    2011-01-01

    Nuclear power reactors require core monitoring during plant operation. To provide safe, clean and reliable core continuously evaluate core conditions. Currently, the reactor core monitoring process is carried out by nuclear code systems that together with data from plant instrumentation, such as, thermocouples, ex-core detectors and fixed or moveable In-core detectors, can easily predict and monitor a variety of plant conditions. Typically, the standard nodal methods can be found on the heart of such nuclear monitoring code systems. However, standard nodal methods require large computer running times when compared with standards course-mesh finite difference schemes. Unfortunately, classic finite-difference models require a fine mesh reactor core representation. To override this unlikely model characteristic we can usually use the classic modified one group model to take some account for the main core neutronic behavior. In this model a course-mesh core representation can be easily evaluated with a crude treatment of thermal neutrons leakage. In this work, an improvement made on classic modified one group model based on a buckling thermal correction was used to obtain a fast, accurate and reliable core monitoring system methodology for future applications, providing a powerful tool for core monitoring process. (author)

  20. An automated approach for annual layer counting in ice cores

    Science.gov (United States)

    Winstrup, M.; Svensson, A.; Rasmussen, S. O.; Winther, O.; Steig, E.; Axelrod, A.

    2012-04-01

    The temporal resolution of some ice cores is sufficient to preserve seasonal information in the ice core record. In such cases, annual layer counting represents one of the most accurate methods to produce a chronology for the core. Yet, manual layer counting is a tedious and sometimes ambiguous job. As reliable layer recognition becomes more difficult, a manual approach increasingly relies on human interpretation of the available data. Thus, much may be gained by an automated and therefore objective approach for annual layer identification in ice cores. We have developed a novel method for automated annual layer counting in ice cores, which relies on Bayesian statistics. It uses algorithms from the statistical framework of Hidden Markov Models (HMM), originally developed for use in machine speech recognition. The strength of this layer detection algorithm lies in the way it is able to imitate the manual procedures for annual layer counting, while being based on purely objective criteria for annual layer identification. With this methodology, it is possible to determine the most likely position of multiple layer boundaries in an entire section of ice core data at once. It provides a probabilistic uncertainty estimate of the resulting layer count, hence ensuring a proper treatment of ambiguous layer boundaries in the data. Furthermore multiple data series can be incorporated to be used at once, hence allowing for a full multi-parameter annual layer counting method similar to a manual approach. In this study, the automated layer counting algorithm has been applied to data from the NGRIP ice core, Greenland. The NGRIP ice core has very high temporal resolution with depth, and hence the potential to be dated by annual layer counting far back in time. In previous studies [Andersen et al., 2006; Svensson et al., 2008], manual layer counting has been carried out back to 60 kyr BP. A comparison between the counted annual layers based on the two approaches will be presented

  1. Modular approach to LWR in-core fuel management

    International Nuclear Information System (INIS)

    Urli, N.; Pevec, D.; Coffou, E.; Petrovic, B.

    1980-01-01

    The most important methods in the LWR in-core fuel management are reviewed. A modular approach and optimization by use of infinite multiplication factor and power form-factor are favoured. A computer program for rotation of fuel assemblies at reloads has been developed which improves further fuel economy and reliability of nuclear power plants. The program has been tested on the PWR core and showed to decrease the power form-factors and flatten the radial power distribution. (author)

  2. General presentation of the core mechanical behaviour approach in France

    International Nuclear Information System (INIS)

    Bernard, A.; Dorsselaere, J.P. van

    1984-01-01

    This French review paper presents the evolution along time of the FBR core mechanical behaviour approach, from RAPSODIE to SPX2, through PHENIX and SPX1: core designs, knowledge of the irradiation laws, project criterias, calculation codes, and R and D fields. (author)

  3. Core outcome sets in dermatology: report from the second meeting of the International Cochrane Skin Group Core Outcome Set Initiative.

    Science.gov (United States)

    Kottner, J; Jacobi, L; Hahnel, E; Alam, M; Balzer, K; Beeckman, D; Busard, C; Chalmers, J; Deckert, S; Eleftheriadou, V; Furlan, K; Horbach, S E R; Kirkham, J; Nast, A; Spuls, P; Thiboutot, D; Thorlacius, L; Weller, K; Williams, H C; Schmitt, J

    2018-04-01

    Results of clinical trials are the most important information source for generating external clinical evidence. The use of different outcomes across trials, which investigate similar interventions for similar patient groups, significantly limits the interpretation, comparability and clinical application of trial results. Core outcome sets (COSs) aim to overcome this limitation. A COS is an agreed standardized collection of outcomes that should be measured and reported in all clinical trials for a specific clinical condition. The Core Outcome Set Initiative within the Cochrane Skin Group (CSG-COUSIN) supports the development of core outcomes in dermatology. In the second CSG-COUSIN meeting held in 2017, 11 COS development groups working on skin diseases presented their current work. The presentations and discussions identified the following overarching methodological challenges for COS development in dermatology: it is not always easy to define the disease focus of a COS; the optimal method for outcome domain identification and level of detail needed to specify such domains is challenging to many; decision rules within Delphi surveys need to be improved; appropriate ways of patient involvement are not always clear. In addition, there appear to be outcome domains that may be relevant as potential core outcome domains for the majority of skin diseases. The close collaboration between methodologists in the Core Outcome Set Initiative and the international Cochrane Skin Group has major advantages for trialists, systematic reviewers and COS developers. © 2018 British Association of Dermatologists.

  4. MTR core loading pattern optimization using burnup dependent group constants

    Directory of Open Access Journals (Sweden)

    Iqbal Masood

    2008-01-01

    Full Text Available A diffusion theory based MTR fuel management methodology has been developed for finding superior core loading patterns at any stage for MTR systems, keeping track of burnup of individual fuel assemblies throughout their history. It is based on using burnup dependent group constants obtained by the WIMS-D/4 computer code for standard fuel elements and control fuel elements. This methodology has been implemented in a computer program named BFMTR, which carries out detailed five group diffusion theory calculations using the CITATION code as a subroutine. The core-wide spatial flux and power profiles thus obtained are used for calculating the peak-to-average power and flux-ratios along with the available excess reactivity of the system. The fuel manager can use the BFMTR code for loading pattern optimization for maximizing the excess reactivity, keeping the peak-to-average power as well as flux-ratio within constraints. The results obtained by the BFMTR code have been found to be in good agreement with the corresponding experimental values for the equilibrium core of the Pakistan Research Reactor-1.

  5. Designing Class Activities to Meet Specific Core Training Competencies: A Developmental Approach

    Science.gov (United States)

    Guth, Lorraine J.; McDonnell, Kelly A.

    2004-01-01

    This article presents a developmental model for designing and utilizing class activities to meet specific Association for Specialists in Group Work (ASGW) core training competencies for group workers. A review of the relevant literature about teaching group work and meeting core training standards is provided. The authors suggest a process by…

  6. A Two-Step Approach to Uncertainty Quantification of Core Simulators

    Directory of Open Access Journals (Sweden)

    Artem Yankov

    2012-01-01

    Full Text Available For the multiple sources of error introduced into the standard computational regime for simulating reactor cores, rigorous uncertainty analysis methods are available primarily to quantify the effects of cross section uncertainties. Two methods for propagating cross section uncertainties through core simulators are the XSUSA statistical approach and the “two-step” method. The XSUSA approach, which is based on the SUSA code package, is fundamentally a stochastic sampling method. Alternatively, the two-step method utilizes generalized perturbation theory in the first step and stochastic sampling in the second step. The consistency of these two methods in quantifying uncertainties in the multiplication factor and in the core power distribution was examined in the framework of phase I-3 of the OECD Uncertainty Analysis in Modeling benchmark. With the Three Mile Island Unit 1 core as a base model for analysis, the XSUSA and two-step methods were applied with certain limitations, and the results were compared to those produced by other stochastic sampling-based codes. Based on the uncertainty analysis results, conclusions were drawn as to the method that is currently more viable for computing uncertainties in burnup and transient calculations.

  7. s-core network decomposition: A generalization of k-core analysis to weighted networks

    Science.gov (United States)

    Eidsaa, Marius; Almaas, Eivind

    2013-12-01

    A broad range of systems spanning biology, technology, and social phenomena may be represented and analyzed as complex networks. Recent studies of such networks using k-core decomposition have uncovered groups of nodes that play important roles. Here, we present s-core analysis, a generalization of k-core (or k-shell) analysis to complex networks where the links have different strengths or weights. We demonstrate the s-core decomposition approach on two random networks (ER and configuration model with scale-free degree distribution) where the link weights are (i) random, (ii) correlated, and (iii) anticorrelated with the node degrees. Finally, we apply the s-core decomposition approach to the protein-interaction network of the yeast Saccharomyces cerevisiae in the context of two gene-expression experiments: oxidative stress in response to cumene hydroperoxide (CHP), and fermentation stress response (FSR). We find that the innermost s-cores are (i) different from innermost k-cores, (ii) different for the two stress conditions CHP and FSR, and (iii) enriched with proteins whose biological functions give insight into how yeast manages these specific stresses.

  8. Photoluminescence effects of graphitic core size and surface functional groups in carbon dots: COO− induced red-shift emission

    KAUST Repository

    Hola, Katerina; Bourlinos, Athanasios B.; Kozak, Ondrej; Berka, Karel; Siskova, Karolina M.; Havrdova, Marketa; Tucek, Jiri; Safarova, Klara; Otyepka, Michal; Giannelis, Emmanuel P.; Zboril, Radek

    2014-01-01

    We present a simple molecular approach to control the lipophilic/ hydrophilic nature of photoluminescent carbon dots (CDs) based on pyrolysis of alkyl gallate precursors. Depending on the gallic acid derivative used, CDs with different alkyl groups (methyl, propyl, lauryl) on the surface can be obtained by isothermal heating at 270 C. This precursor-derived approach allows not only the control of lipophilicity but also the length of the particular alkyl chain enables the control over both the size and photoluminescence (PL) of the prepared CDs. Moreover, the alkyl chains on the CDs surface can be readily converted to carboxylate groups via a mild base hydrolysis to obtain water dispersible CDs with a record biocompatibility. The observed differences in PL properties of CDs and time-resolved PL data, including contributions from carbogenic cores and surface functional group, are rationalized and discussed in detail using time-dependent density functional theory (TD-DFT) calculations. © 2013 Elsevier Ltd. All rights reserved.

  9. Photoluminescence effects of graphitic core size and surface functional groups in carbon dots: COO− induced red-shift emission

    KAUST Repository

    Hola, Katerina

    2014-04-01

    We present a simple molecular approach to control the lipophilic/ hydrophilic nature of photoluminescent carbon dots (CDs) based on pyrolysis of alkyl gallate precursors. Depending on the gallic acid derivative used, CDs with different alkyl groups (methyl, propyl, lauryl) on the surface can be obtained by isothermal heating at 270 C. This precursor-derived approach allows not only the control of lipophilicity but also the length of the particular alkyl chain enables the control over both the size and photoluminescence (PL) of the prepared CDs. Moreover, the alkyl chains on the CDs surface can be readily converted to carboxylate groups via a mild base hydrolysis to obtain water dispersible CDs with a record biocompatibility. The observed differences in PL properties of CDs and time-resolved PL data, including contributions from carbogenic cores and surface functional group, are rationalized and discussed in detail using time-dependent density functional theory (TD-DFT) calculations. © 2013 Elsevier Ltd. All rights reserved.

  10. Summary on the activity of AERs Working Group on core monitoring (flux reconstruction, in-core measurements)

    International Nuclear Information System (INIS)

    Nemes, I.

    2010-01-01

    Working Group C had a joint meeting with Group G in Balatonfuered, Hungary, 31 May-1 June, 2010. At the joint meeting 21 people from 10 AER member organisations of 4 countries - such as Russia, Czech Republic, Slovakia and Hungary - participated. In the 2 days of the program 15 papers were presented, 10 from these connected to the topic of working group C. The title of papers and the list of participants are attached. At the meeting the following topics were discussed:1-Gd fuel introduction and experiences;2-Reactor physical measurement and evaluation problems; 3-Code development and testing;4-In-core surveillance system developments. (Author)

  11. Towards inclusive occupational therapy: Introducing the CORE approach for inclusive and occupation-focused practice.

    Science.gov (United States)

    Pereira, Robert B

    2017-12-01

    Occupation is a human right and a social determinant of health. It is also taken for granted. Having access to, and participating in, occupation, is intricately linked to positive health and wellbeing. Despite theory and evidence to support the link between occupation, health and wellbeing, occupational therapists can struggle with applying an occupation focus in practice and knowing how to use occupational frameworks to enable occupation. The purpose of this paper is to introduce the Capabilities, Opportunities, Resources and Environments (CORE) approach for inclusive and occupation-focused practice. It provides occupational therapists with a means of operationalising occupational enablement and facilitating social inclusion. The CORE approach is introduced by linking its main ideas to Economist and Nobel Prize Laureate Amartya Sen's capabilities approach, as well as findings from the author's doctoral research into entrenched disadvantage and social inclusion. Practical questions guided by the CORE approach's acronym are given to explore how the approach can be utilised alongside other occupational models and frameworks to encourage strategies for effective enablement through occupation for social inclusion. As experts in enabling occupation, occupational therapists can use the CORE approach to design occupation-focused interventions and promote inclusive occupational therapy. © 2017 Occupational Therapy Australia.

  12. Fast three-dimensional core optimization based on modified one-group model

    Energy Technology Data Exchange (ETDEWEB)

    Freire, Fernando S. [ELETROBRAS Termonuclear S.A. - ELETRONUCLEAR, Rio de Janeiro, RJ (Brazil). Dept. GCN-T], e-mail: freire@eletronuclear.gov.br; Martinez, Aquilino S.; Silva, Fernando C. da [Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Nuclear], e-mail: aquilino@con.ufrj.br, e-mail: fernando@con.ufrj.br

    2009-07-01

    The optimization of any nuclear reactor core is an extremely complex process that consumes a large amount of computer time. Fortunately, the nuclear designer can rely on a variety of methodologies able to approximate the analysis of each available core loading pattern. Two-dimensional codes are usually used to analyze the loading scheme. However, when particular axial effects are present in the core, two-dimensional analysis cannot produce good results and three-dimensional analysis can be required at all time. Basically, in this paper are presented the major advantages that can be found when one use the modified one-group diffusion theory coupled with a buckling correction model in optimization process. The results of the proposed model are very accurate when compared to benchmark results obtained from detailed calculations using three-dimensional nodal codes (author)

  13. Fast three-dimensional core optimization based on modified one-group model

    International Nuclear Information System (INIS)

    Freire, Fernando S.; Martinez, Aquilino S.; Silva, Fernando C. da

    2009-01-01

    The optimization of any nuclear reactor core is an extremely complex process that consumes a large amount of computer time. Fortunately, the nuclear designer can rely on a variety of methodologies able to approximate the analysis of each available core loading pattern. Two-dimensional codes are usually used to analyze the loading scheme. However, when particular axial effects are present in the core, two-dimensional analysis cannot produce good results and three-dimensional analysis can be required at all time. Basically, in this paper are presented the major advantages that can be found when one use the modified one-group diffusion theory coupled with a buckling correction model in optimization process. The results of the proposed model are very accurate when compared to benchmark results obtained from detailed calculations using three-dimensional nodal codes (author)

  14. Depletion Calculations for MTR Core Using MCNPX and Multi-Group Nodal Diffusion Methods

    International Nuclear Information System (INIS)

    Jaradata, Mustafa K.; Park, Chang Je; Lee, Byungchul

    2013-01-01

    In order to maintain a self-sustaining steady-state chain reaction, more fuel than is necessary in order to maintain a steady state chain reaction must be loaded. The introduction of this excess fuel increases the net multiplication capability of the system. In this paper MCNPX and multi-group nodal diffusion theory will be used for depletion calculations for MTR core. The eigenvalue and power distribution in the core will be compared for different burnup. Multi-group nodal diffusion theory with combination of NEWT-TRITON system was used to perform depletion calculations for 3Χ3 MTR core. 2G and 6G approximations were used and compared with MCNPX results for 2G approximation the maximum difference from MCNPX was 40 mk and for 6G approximation was 6 mk which is comparable to the MCNPX results. The calculated power using nodal code was almost the same MCNPX results. Finally the results of the multi-group nodal theory were acceptable and comparable to the calculated using MCNPX

  15. One Health Core Competency Domains

    Directory of Open Access Journals (Sweden)

    Rebekah Frankson

    2016-09-01

    Full Text Available The emergence of complex global challenges at the convergence of human, animal, and environmental health has catalyzed a movement supporting ‘One Health’ approaches. Despite recognition of the importance of One Health approaches to address these complex challenges, little effort has been directed at identifying the seminal knowledge, skills and attitudes necessary for individuals to successfully contribute to One Health efforts. Between 2008 and 2011, three groups independently embarked on separate initiatives to identify core competencies for professionals involved with One Health approaches. Core competencies were considered critically important for guiding curriculum development and continuing professional education as they describe the knowledge, skills and attitudes required to be effective. A workshop was convened in 2012 to synthesize the various strands of work on One Health competencies. Despite having different mandates, participants, and approaches, all of these initiatives identified similar core competency domains: management; communication and informatics; values and ethics; leadership; teams and collaboration; roles and responsibilities; and systems thinking. These core competency domains have been used to develop new continuing professional education programs for One Health professionals and help university curricula prepare new graduates to be able to contribute more effectively to One Health approaches.

  16. One Health Core Competency Domains.

    Science.gov (United States)

    Frankson, Rebekah; Hueston, William; Christian, Kira; Olson, Debra; Lee, Mary; Valeri, Linda; Hyatt, Raymond; Annelli, Joseph; Rubin, Carol

    2016-01-01

    The emergence of complex global challenges at the convergence of human, animal, and environmental health has catalyzed a movement supporting "One Health" approaches. Despite recognition of the importance of One Health approaches to address these complex challenges, little effort has been directed at identifying the seminal knowledge, skills, and attitudes necessary for individuals to successfully contribute to One Health efforts. Between 2008 and 2011, three groups independently embarked on separate initiatives to identify core competencies for professionals involved with One Health approaches. Core competencies were considered critically important for guiding curriculum development and continuing professional education, as they describe the knowledge, skills, and attitudes required to be effective. A workshop was convened in 2012 to synthesize the various strands of work on One Health competencies. Despite having different mandates, participants, and approaches, all of these initiatives identified similar core competency domains: management; communication and informatics; values and ethics; leadership; teams and collaboration; roles and responsibilities; and systems thinking. These core competency domains have been used to develop new continuing professional education programs for One Health professionals and help university curricula prepare new graduates to be able to contribute more effectively to One Health approaches.

  17. Identifying Core Mobile Learning Faculty Competencies Based Integrated Approach: A Delphi Study

    Science.gov (United States)

    Elbarbary, Rafik Said

    2015-01-01

    This study is based on the integrated approach as a concept framework to identify, categorize, and rank a key component of mobile learning core competencies for Egyptian faculty members in higher education. The field investigation framework used four rounds Delphi technique to determine the importance rate of each component of core competencies…

  18. Core drilling provides information about Santa Fe Group aquifer system beneath Albuquerque's West Mesa

    Science.gov (United States)

    Allen, B.D.; Connell, S.D.; Hawley, J.W.; Stone, B.D.

    1998-01-01

    Core samples from the upper ???1500 ft of the Santa Fe Group in the Albuquerque West Mesa area provide a first-hand look at the sediments and at subsurface stratigraphic relationships in this important part of the basin-fill aquifer system. Two major hydrostratigraphic subunits consisting of a lower coarse-grained, sandy interval and an overlying fine-grained, interbedded silty sand and clay interval lie beneath the water table at the 98th St core hole. Borehole electrical conductivity measurements reproduce major textural changes observed in the recovered cores and support subsurface correlations of hydrostratigraphic units in the Santa Fe Group aquifer system based on geophysical logs. Comparison of electrical logs from the core hole and from nearby city wells reveals laterally consistent lithostratigraphic patterns over much of the metropolitan area west of the Rio Grande that may be used to delineate structural and related stratigraphic features that have a direct bearing on the availability of ground water.

  19. A Creative Approach to the Common Core Standards: The Da Vinci Curriculum

    Science.gov (United States)

    Chaucer, Harry

    2012-01-01

    "A Creative Approach to the Common Core Standards: The Da Vinci Curriculum" challenges educators to design programs that boldly embrace the Common Core State Standards by imaginatively drawing from the genius of great men and women such as Leonardo da Vinci. A central figure in the High Renaissance, Leonardo made extraordinary contributions as a…

  20. An approach for coupled-code multiphysics core simulations from a common input

    International Nuclear Information System (INIS)

    Schmidt, Rodney; Belcourt, Kenneth; Hooper, Russell; Pawlowski, Roger; Clarno, Kevin; Simunovic, Srdjan; Slattery, Stuart; Turner, John; Palmtag, Scott

    2015-01-01

    Highlights: • We describe an approach for coupled-code multiphysics reactor core simulations. • The approach can enable tight coupling of distinct physics codes with a common input. • Multi-code multiphysics coupling and parallel data transfer issues are explained. • The common input approach and how the information is processed is described. • Capabilities are demonstrated on an eigenvalue and power distribution calculation. - Abstract: This paper describes an approach for coupled-code multiphysics reactor core simulations that is being developed by the Virtual Environment for Reactor Applications (VERA) project in the Consortium for Advanced Simulation of Light-Water Reactors (CASL). In this approach a user creates a single problem description, called the “VERAIn” common input file, to define and setup the desired coupled-code reactor core simulation. A preprocessing step accepts the VERAIn file and generates a set of fully consistent input files for the different physics codes being coupled. The problem is then solved using a single-executable coupled-code simulation tool applicable to the problem, which is built using VERA infrastructure software tools and the set of physics codes required for the problem of interest. The approach is demonstrated by performing an eigenvalue and power distribution calculation of a typical three-dimensional 17 × 17 assembly with thermal–hydraulic and fuel temperature feedback. All neutronics aspects of the problem (cross-section calculation, neutron transport, power release) are solved using the Insilico code suite and are fully coupled to a thermal–hydraulic analysis calculated by the Cobra-TF (CTF) code. The single-executable coupled-code (Insilico-CTF) simulation tool is created using several VERA tools, including LIME (Lightweight Integrating Multiphysics Environment for coupling codes), DTK (Data Transfer Kit), Trilinos, and TriBITS. Parallel calculations are performed on the Titan supercomputer at Oak

  1. A Core Design Approach Aimed at Sustainability and Intrinsic Safety

    International Nuclear Information System (INIS)

    Grasso, Giacomo

    2013-01-01

    The comprehensive approach adopted for the core design of all LFRs investigated within the LEADER project, proved to effectively drive the design to the fulfillment of the aimed sustainability performances, and the respect of the design constraints for the robust implementation of the inherent safety principle: • the ELFR core is able to operate adiabatically, with a very narrow reactivity swing along a 2.5 y cycle; • wide margins are provided for protecting the fuel and the structures even in case of unprotected transients, allowing for very long grace times

  2. Analysis of Students Ability on Creative Thinking Aspects in terms of Cognitive Style in Mathematics Learning with CORE Model Using Constructivism Approach

    Directory of Open Access Journals (Sweden)

    Mita Konita

    2017-03-01

    that : (1 learning outcomes in the aspect of creative thinking abilities with CORE learning model use a constructivist approach achieve mastery of classical; (2 the mean result of learning on aspect of creative thinking abilities with CORE learning model use a constructivist approach is more than 75; (3 the record time of reflective cognitive style characteristics is least so that it has less answering frequency, while the record time of implusive cognitive style characteristics is fast, it has more answering frequency; (4 the students’ group in implusive cognitive learning fulfill the creative thinking indicator of flexibility and novelty, while the students’ group in implusive cognitive learning fulfill the indicator of flexible creative thinking in overcoming the problems.

  3. Core schemas across the continuum of psychosis: a comparison of clinical and non-clinical groups.

    Science.gov (United States)

    Taylor, Hannah E; Stewart, Suzanne L K; Dunn, Graham; Parker, Sophie; Fowler, David; Morrison, Anthony P

    2014-11-01

    Research suggests that core schemas are important in both the development and maintenance of psychosis. The aim of the study was to investigate and compare core schemas in four groups along the continuum of psychosis and examine the relationships between schemas and positive psychotic symptomatology. A measure of core schemas was distributed to 20 individuals experiencing first-episode psychosis (FEP), 113 individuals with "at risk mental states" (ARMS), 28 participants forming a help-seeking clinical group (HSC), and 30 non-help-seeking individuals who endorse some psychotic-like experiences (NH). The clinical groups scored significantly higher than the NH group for negative beliefs about self and about others. No significant effects of group on positive beliefs about others were found. For positive beliefs about the self, the NH group scored significantly higher than the clinical groups. Furthermore, negative beliefs about self and others were related to positive psychotic symptomatology and to distress related to those experiences. Negative evaluations of the self and others appear to be characteristic of the appraisals of people seeking help for psychosis and psychosis-like experiences. The results support the literature that suggests that self-esteem should be a target for intervention. Future research would benefit from including comparison groups of people experiencing chronic psychosis and people who do not have any psychotic-like experiences.

  4. A non-algorithmic approach to the In-core-fuel management problem of a PWR core

    International Nuclear Information System (INIS)

    Kimhy, Y.

    1992-03-01

    The primary objective of a commercial nuclear power plant operation is to produce electricity a low cost while satisfying safety constraints imposed on the operating conditions. Design of a fuel reload cycle for the current generation nuclear power plant represents a multistage process with a series of design decisions taken at various time points. Of these stages, reload core design is an important stage, due to its impact on safety and economic plant performance parameters. Overall. performance of the plant during the power production cycle depends on chosen fresh fuel parameters, as well as specific fuel configuration of the reactor core. The motivation to computerize generation and optimization of fuel reload configurations follows from some reasons: first, reload is performed periodically and requires manipulation of a large amount of data. second, in recent years, more complicated fuel loading patterns were developed and implemented following changes in fuel design and/or operational requirements, such as, longer cycles, advanced burnable poison designs, low leakage loading patterns and reduction of irradiation-induced damage of the pressure vessel. An algorithmic approach to the problem was generally adopted. The nature of the reload design process is a 'heuristic' search performed manually by a fuel manager. The knowledge used by the fuel manager is mostly accumulated experience in reactor physics and core calculations. These features of the problem and the inherent disadvantage of the algorithmic method are the main reasons to explore a non-algorithmic approach for solving the reload configuration problem. Several features of the 'solutions space' ( a collection of acceptable final configurations ) are emphasized in this work: 1) the space contain numerous number of entities (> 25) that are distributed un homogeneously, 2) the lack of a monotonic objective function decrease the probability to find an isolated optimum configuration by depth first search or

  5. Core competencies for shared decision making training programs: insights from an international, interdisciplinary working group.

    Science.gov (United States)

    Légaré, France; Moumjid-Ferdjaoui, Nora; Drolet, Renée; Stacey, Dawn; Härter, Martin; Bastian, Hilda; Beaulieu, Marie-Dominique; Borduas, Francine; Charles, Cathy; Coulter, Angela; Desroches, Sophie; Friedrich, Gwendolyn; Gafni, Amiram; Graham, Ian D; Labrecque, Michel; LeBlanc, Annie; Légaré, Jean; Politi, Mary; Sargeant, Joan; Thomson, Richard

    2013-01-01

    Shared decision making is now making inroads in health care professionals' continuing education curriculum, but there is no consensus on what core competencies are required by clinicians for effectively involving patients in health-related decisions. Ready-made programs for training clinicians in shared decision making are in high demand, but existing programs vary widely in their theoretical foundations, length, and content. An international, interdisciplinary group of 25 individuals met in 2012 to discuss theoretical approaches to making health-related decisions, compare notes on existing programs, take stock of stakeholders concerns, and deliberate on core competencies. This article summarizes the results of those discussions. Some participants believed that existing models already provide a sufficient conceptual basis for developing and implementing shared decision making competency-based training programs on a wide scale. Others argued that this would be premature as there is still no consensus on the definition of shared decision making or sufficient evidence to recommend specific competencies for implementing shared decision making. However, all participants agreed that there were 2 broad types of competencies that clinicians need for implementing shared decision making: relational competencies and risk communication competencies. Further multidisciplinary research could broaden and deepen our understanding of core competencies for shared decision making training. Copyright © 2013 The Alliance for Continuing Education in the Health Professions, the Society for Academic Continuing Medical Education, and the Council on CME, Association for Hospital Medical Education.

  6. Remodelling core group theory: the role of sustaining populations in HIV transmission.

    Science.gov (United States)

    Watts, Charlotte; Zimmerman, Cathy; Foss, Anna M; Hossain, Mazeda; Cox, Andrew; Vickerman, Peter

    2010-12-01

    Core group theory describes the central role of groups with high rates of sexual partner change in HIV transmission. Research illustrates the heterogeneous and dynamic nature of commercial sex, and that some men involved in the organisation or policing of sex work regularly have sex with sex workers. These findings are used to explore gaps in core group theory. Evidence from developing countries on the duration that women sell and men buy sex was reviewed. Simple compartmental dynamic models were used to derive analytical expressions for the relative HIV equilibrium levels among sex workers and partners, incorporating partner change rates and duration in commercial sex settings. Simulations explored the degree to which HIV infection can be attributable to men with low partner change rates who remain in sex work settings for long periods, and their influence on the impact of HIV intervention. Partner change rates and duration of time in a setting determine equilibrium HIV levels. Modelling projections suggest that men with low mobility can substantially contribute to HIV prevalence among sex workers, especially in settings with prevalences group theory. Men who control the sex industry and regular clients may form an important 'sustaining population' that increases infection and undermines the impact of intervention. Intervention activities should include these groups, and examine the social organisation of sex work that underpins many of these relationships.

  7. Different Approaches to Cross-Lingual Focus Groups

    Directory of Open Access Journals (Sweden)

    Maira Quintanilha

    2015-12-01

    Full Text Available Focus groups are a useful data-generation strategy in qualitative health research when it is important to understand how social contexts shape participants’ health. However, when cross-lingual focus groups are conducted across cultural groups, and in languages in which the researcher is not fluent, questions regarding the usefulness and rigor of the findings can be raised. In this article, we will discuss three different approaches to cross-lingual focus groups used in a community-based participatory research project with pregnant and postpartum, African immigrant women in Alberta, Canada. In two approaches, we moderated focus groups in women’s mother tongue with the support of real-time interpreters, but in the first approach, audio recording was used and in the second approach, audio recording was not used. In the third approach, a bilingual moderator facilitated focus groups in women’s mother tongue, with transcription and translation of audio-recorded data upon completion of data generation. We will describe each approach in detail, including their advantages and challenges, and recontextualize what we have learned within the known literature. We expect the lessons learned in this project may assist others in planning and implementing cross-lingual focus groups, especially in the context of community-based participatory research.

  8. Children's science learning: A core skills approach.

    Science.gov (United States)

    Tolmie, Andrew K; Ghazali, Zayba; Morris, Suzanne

    2016-09-01

    Research has identified the core skills that predict success during primary school in reading and arithmetic, and this knowledge increasingly informs teaching. However, there has been no comparable work that pinpoints the core skills that underlie success in science. The present paper attempts to redress this by examining candidate skills and considering what is known about the way in which they emerge, how they relate to each other and to other abilities, how they change with age, and how their growth may vary between topic areas. There is growing evidence that early-emerging tacit awareness of causal associations is initially separated from language-based causal knowledge, which is acquired in part from everyday conversation and shows inaccuracies not evident in tacit knowledge. Mapping of descriptive and explanatory language onto causal awareness appears therefore to be a key development, which promotes unified conceptual and procedural understanding. This account suggests that the core components of initial science learning are (1) accurate observation, (2) the ability to extract and reason explicitly about causal connections, and (3) knowledge of mechanisms that explain these connections. Observational ability is educationally inaccessible until integrated with verbal description and explanation, for instance, via collaborative group work tasks that require explicit reasoning with respect to joint observations. Descriptive ability and explanatory ability are further promoted by managed exposure to scientific vocabulary and use of scientific language. Scientific reasoning and hypothesis testing are later acquisitions that depend on this integration of systems and improved executive control. © 2016 The British Psychological Society.

  9. A simple approach to the construction of the core structure present in ...

    Indian Academy of Sciences (India)

    A simple approach to the construction of the core structure present in bielschowskysin and ... spongeHippospongia lachneelicited considerable interest amongst the organic ..... ogy, Government of India for financial support through. J. C. Bose ...

  10. A novel approach to linearization of the electromagnetic parameters of tokamaks with an iron core

    Energy Technology Data Exchange (ETDEWEB)

    Fu, P. E-mail: fupeng@mail.ipp.ac.cn; Liu, Z.Z.; Zou, J.H

    2002-05-01

    The equivalent model of an iron core tokamak is developed, in which the electromagnetic parameters of several pairs of coils in opposite series (PCOS) are not dependent on the saturation of the iron core during tokamak operation. With this the electromagnetic parameters of all the coils in an iron core tokamak can be linearized, As an example, the electromagnetic parameters of Hefei Super-conductive Tokamak with iron core (HT-7) are linearized, and it is in good agreement with the experimental results. The linearization approach can be applied in real time plasma control and electromagnetic analysis.

  11. Vegetables and other core food groups

    NARCIS (Netherlands)

    Poelman, Astrid A.M.; Delahunty, Conor M.; Graaf, de Kees

    2017-01-01

    Vegetables are the food category least liked by children. This research investigated the sensory properties of vegetables vis-a-vis other core foods that comprise children's diets, to determine to what degree low acceptance of vegetables can be attributed to sensory properties. Vegetables (n =

  12. A Preliminary Core Domain Set for Clinical Trials of Shoulder Disorders: A Report from the OMERACT 2016 Shoulder Core Outcome Set Special Interest Group.

    Science.gov (United States)

    Buchbinder, Rachelle; Page, Matthew J; Huang, Hsiaomin; Verhagen, Arianne P; Beaton, Dorcas; Kopkow, Christian; Lenza, Mario; Jain, Nitin B; Richards, Bethan; Richards, Pamela; Voshaar, Marieke; van der Windt, Danielle; Gagnier, Joel J

    2017-12-01

    The Outcome Measures in Rheumatology (OMERACT) Shoulder Core Outcome Set Special Interest Group (SIG) was established to develop a core outcome set (COS) for clinical trials of shoulder disorders. In preparation for OMERACT 2016, we systematically examined all outcome domains and measurement instruments reported in 409 randomized trials of interventions for shoulder disorders published between 1954 and 2015. Informed by these data, we conducted an international Delphi consensus study including shoulder trial experts, clinicians, and patients to identify key domains that should be included in a shoulder disorder COS. Findings were discussed at a stakeholder premeeting of OMERACT. At OMERACT 2016, we sought consensus on a preliminary core domain set and input into next steps. There were 13 and 15 participants at the premeeting and the OMERACT 2016 SIG meeting, respectively (9 attended both meetings). Consensus was reached on a preliminary core domain set consisting of an inner core of 4 domains: pain, physical function/activity, global perceived effect, and adverse events including death. A middle core consisted of 3 domains: emotional well-being, sleep, and participation (recreation and work). An outer core of research required to inform the final COS was also formulated. Our next steps are to (1) analyze whether participation (recreation and work) should be in the inner core, (2) conduct a third Delphi round to finalize definitions and wording of domains and reach final endorsement for the domains, and (3) determine which instruments fulfill the OMERACT criteria for measuring each domain.

  13. A study on the framework for selecting core R and D programmes in Energy Technology Roadmap by the DEA approach

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Seong Kon; Mogi, Gento; Kim, Jong Wook

    2007-07-01

    South Korea is the 10th largest energy consumer in the world because of the poor country of natural resources such as petroleum, coal, and natural gas. It is essential to solve the energy difficulty of secure supply and demand of national energy. We established the energy technology roadmap to prepare for the next 10 years. We clustered 3 core technological sectors such as technology for high oil prices, the United nations framework for climate change, and the hydrogen economy. But we didn't prioritize the weights of energy technology development in energy technology roadmap. To allocate the finite resources efficiently, we cluster the preferred groups and non-preferred groups by the data envelopment analysis (DEA) approach. Through the scientific decision making approach, we can allocate R and D capacity, budget, and infrastructures efficiently to produce outstanding R and D outputs. (auth)

  14. Status of degraded core issues. Synthesis paper prepared by G. Bandini in collaboration with the NEA task group on degraded core cooling

    International Nuclear Information System (INIS)

    2001-02-01

    The in-vessel evolution of a severe accident in a nuclear reactor is characterised, generally, by core uncover and heat-up, core material oxidation and melting, molten material relocation and debris behaviour in the lower plenum up to vessel failure. The in-vessel core melt progression involves a large number of physical and chemical phenomena that may depend on the severe accident sequence and the reactor type under consideration. Core melt progression has been studied in the last twenty years through many experimental works. Since then, computer codes are being developed and validated to analyse different reactor accident sequences. The experience gained from the TMI-2 accident also constitutes an important source of data. The understanding of core degradation process is necessary to evaluate initial conditions for subsequent phases of the accident (ex-vessel and within the containment), and define accident management strategies and mitigative actions for operating and advanced reactors. This synthesis paper, prepared within the Task Group on Degraded Core Cooling (TG-DCC) of PWG2, contains a brief summary of current views on the status of degraded core issues regarding light water reactors. The in-vessel fission product release and transport issue is not addressed in this paper. The areas with remaining uncertainties and the needs for further experimental investigation and model development have been identified. The early phase of core melt progression is reasonably well understood. Remaining uncertainties may be addressed on the basis of ongoing experimental activities, e.g. on core quenching, and research programs foreseen in the near future. The late phase of core melt progression is less understood. Ongoing research programs are providing additional valuable information on corium molten pool behaviour. Confirmatory research is still required. The pool crust behaviour and material relocation into the lower plenum are the areas where additional research should

  15. An approach to development of structural design criteria for highly irradiated core components

    International Nuclear Information System (INIS)

    Nelson, D.V.

    1980-01-01

    The advent of the fast breeder reactor presents novel challenges in structural design and materials engineering. For instance, the core components of these reactors experience high energy neutron irradiation at elevated temperature, which causes significant time-dependent changes in material behaviour, such as a progressive loss of ductility. New structural design criteria are needed to extend elevated temperature design-by-analysis to account for these changes. Alloys best able to cope with the demands of the core operating environment are being explored and their structural behaviour characterized. The purpose of this paper is to illustrate an approach used in the development of core component structural design criteria. To do this, several design rules, plus brief rationale, from draft RDT Standards F9-7, -8 and -9 will be presented. These recently completed standards ('Structural Design Guidelines for Breeder Reactor Core Components') were prepared for the U.S. Department of Energy and represent a consensus among most organizations participating in the U.S. breeder program. (author)

  16. Characterisation of Alternaria species-groups associated with core rot of apples in South Africa

    DEFF Research Database (Denmark)

    Serdani, M.; Kang, J.C.; Andersen, Birgitte

    2002-01-01

    Alternaria core rot of red apple cultivars is a serious post-harvest disease in South Africa. Thirty isolates of Alternaria spp. previously isolated from apple, together with reference isolates of A. alternata and A. infectoria, were characterised and grouped according to their sporulation patter...

  17. [MATCHE: Management Approach to Teaching Consumer and Homemaking Education.] Consumer Approach Strand: Core. Module I-A-3: Consumer Rights and Responsibilities.

    Science.gov (United States)

    Smith, Sharman

    This competency-based preservice home economics teacher education module on consumer rights and responsibilities is the third in a set of four core curriculum modules on consumer approach to homemaking education. (This set is part of a larger series of sixty-seven on the Management Approach to Teaching Consumer and Homemaking Education…

  18. WIMS/PANTHER analysis of UO2/MOX cores using embedded super-cells

    International Nuclear Information System (INIS)

    Knight, M.; Bryce, P.; Hall, S.

    2012-01-01

    This paper describes a method of analysing PWR UO 2 MOX cores with WIMS/PANTHER. Embedded super-cells, run within the reactor code, are used to correct the standard methodology of using 2-group smeared data from single assembly lattice calculations. In many other codes the weakness of this standard approach has been improved for MOX by imposing a more realistic environment in the lattice code, or by improving the sophistication of the reactor code. In this approach an intermediate set of calculations is introduced, leaving both lattice and reactor calculations broadly unchanged. The essence of the approach is that the whole core is broken down into a set of 'embedded' super-cells, each extending over just four quarter assemblies, with zero leakage imposed at the assembly mid-lines. Each supercell is solved twice, first with a detailed multi-group pin-by-pin solution, and then with the standard single assembly approach. Correction factors are defined by comparing the two solutions, and these can be applied in whole core calculations. The restriction that all such calculations are modelled with zero leakage means that they are independent of each other and of the core-wide flux shape. This allows parallel pre-calculation for the entire cycle once the loading pattern has been determined, in much the same way that single assembly lattice calculations can be pre-calculated once the range of fuel types is known. Comparisons against a whole core pin-by-pin reference demonstrates that the embedding process does not introduce a significant error, even after burnup and refuelling. Comparisons against a WIMS reference demonstrate that a pin-by-pin multi-group diffusion solution is capable of capturing the main interface effects. This therefore defines a practical approach for achieving results close to lattice code accuracy, but broadly at the cost of a standard reactor calculation. (authors)

  19. Open Core Data approaches to exposing facility data to support FAIR principles

    Science.gov (United States)

    Fils, D.; Lehnert, K.; Noren, A. J.

    2017-12-01

    The Open Core Data (OCD) award from NSF is focused on exposing scientific drilling data from the JOIDES Resolution Science Operator (JRSO) and Continental Scientific Drilling Coordination Office (CSDCO) following guidance from the Force 11 FAIR principles and the W3C "best practices" recommendations and notes. The goal of this implementation is to provide the identification, access, citation and provenance of these data to support the research community. OCD employs Linked Open Data (LOD) patterns and HTML5 microdata publishing via JSON-LD using various vocabularies. These vocabularies include schema.org, GeoLink and other relevant community vocabularies. Attention is paid to enabling hypermedia navigation between resources to aid in fast and efficient harvesting of the metadata directly from the LOD approach using web architecture patterns. Further, the vocabularies are employed to address the need of both DOI assignment and creation of data citation entries following ESIP data citation recommendations. The use of LOD, community vocabularies and persistent identifiers has enabled linking between hosted and remote data resources. In addition to the semantic metadata and LOD pattern, OCD is implementing approaches to data packaging to facilitate data use. OCD is currently using the CSV for the Web approach but is moving to implement frictionless data packages. This data package model provide access to a large suite of tools, libraries and workbenches to support data utilization, validation and visualization. Further, a basic reference implementation of the W3C PROV-AQ pingback pattern is under testing. This work is done in coordination with the RDA Provenance Patterns WG and follows patterns already employed by Geoscience Australia. This development is also done in coordination with ESIP provenance work. As needed, more traditional Application Program Interfaces (APIs) are exposed following best practices in RESTful services. All these capabilities are implemented

  20. Vocational Didactics: Core Assumptions and Approaches from Denmark, Germany, Norway, Spain and Sweden

    Science.gov (United States)

    Gessler, Michael; Moreno Herrera, Lázaro

    2015-01-01

    The design of vocational didactics has to meet special requirements. Six core assumptions are identified: outcome orientation, cultural-historical embedding, horizontal structure, vertical structure, temporal structure, and the changing nature of work. Different approaches and discussions from school-based systems (Spain and Sweden) and dual…

  1. The coma cluster after lunch: Has a galaxcy group passed through the cluster core?

    Science.gov (United States)

    Burns, Jack O.; Roettiger, Kurt; Ledlow, Michael; Klypin, Anatoly

    1994-01-01

    We propose that the Coma cluster has recently undergone a collision with the NGC 4839 galaxy group. The ROSAT X-ray morphology, the Coma radio halo, the presence of poststarburst galaxies in the bridge between Coma and NGC 4839, the usually high velocity dispersion for the NGC 4839 group, and the position of a large-scale galaxy filament to the NE of Coma are all used to argue that the NGC 4839 group passed through the core of Coma approximately 2 Gyr ago. We present a new Hydro/N-body simulation of the merger between a galaxy group and a rich cluster that reproduces many of the observed X-ray and optical properties of Coma/NGC 4839.

  2. Polarization effects on spectra of spherical core/shell nanostructures: Perturbation theory against finite difference approach

    International Nuclear Information System (INIS)

    Ibral, Asmaa; Zouitine, Asmaa; Assaid, El Mahdi

    2015-01-01

    Poisson equation is solved analytically in the case of a point charge placed anywhere in a spherical core/shell nanostructure, immersed in aqueous or organic solution or embedded in semiconducting or insulating matrix. Conduction and valence band-edge alignments between core and shell are described by finite height barriers. Influence of polarization charges induced at the surfaces where two adjacent materials meet is taken into account. Original expressions of electrostatic potential created everywhere in the space by a source point charge are derived. Expressions of self-polarization potential describing the interaction of a point charge with its own image–charge are deduced. Contributions of double dielectric constant mismatch to electron and hole ground state energies as well as nanostructure effective gap are calculated via first order perturbation theory and also by finite difference approach. Dependencies of electron, hole and gap energies against core to shell radii ratio are determined in the case of ZnS/CdSe core/shell nanostructure immersed in water or in toluene. It appears that finite difference approach is more efficient than first order perturbation method and that the effect of polarization charge may in no case be neglected as its contribution can reach a significant proportion of the value of nanostructure gap

  3. Polarization effects on spectra of spherical core/shell nanostructures: Perturbation theory against finite difference approach

    Energy Technology Data Exchange (ETDEWEB)

    Ibral, Asmaa [Equipe d' Optique et Electronique du Solide, Département de Physique, Faculté des Sciences, Université Chouaïb Doukkali, B. P. 20 El Jadida principale, El Jadida, Royaume du Maroc (Morocco); Laboratoire d' Instrumentation, Mesure et Contrôle, Département de Physique, Faculté des Sciences, Université Chouaïb Doukkali, B. P. 20 El Jadida principale, El Jadida, Royaume du Maroc (Morocco); Zouitine, Asmaa [Département de Physique, Ecole Nationale Supérieure d' Enseignement Technique, Université Mohammed V Souissi, B. P. 6207 Rabat-Instituts, Rabat, Royaume du Maroc (Morocco); Assaid, El Mahdi, E-mail: eassaid@yahoo.fr [Equipe d' Optique et Electronique du Solide, Département de Physique, Faculté des Sciences, Université Chouaïb Doukkali, B. P. 20 El Jadida principale, El Jadida, Royaume du Maroc (Morocco); Laboratoire d' Instrumentation, Mesure et Contrôle, Département de Physique, Faculté des Sciences, Université Chouaïb Doukkali, B. P. 20 El Jadida principale, El Jadida, Royaume du Maroc (Morocco); and others

    2015-02-01

    Poisson equation is solved analytically in the case of a point charge placed anywhere in a spherical core/shell nanostructure, immersed in aqueous or organic solution or embedded in semiconducting or insulating matrix. Conduction and valence band-edge alignments between core and shell are described by finite height barriers. Influence of polarization charges induced at the surfaces where two adjacent materials meet is taken into account. Original expressions of electrostatic potential created everywhere in the space by a source point charge are derived. Expressions of self-polarization potential describing the interaction of a point charge with its own image–charge are deduced. Contributions of double dielectric constant mismatch to electron and hole ground state energies as well as nanostructure effective gap are calculated via first order perturbation theory and also by finite difference approach. Dependencies of electron, hole and gap energies against core to shell radii ratio are determined in the case of ZnS/CdSe core/shell nanostructure immersed in water or in toluene. It appears that finite difference approach is more efficient than first order perturbation method and that the effect of polarization charge may in no case be neglected as its contribution can reach a significant proportion of the value of nanostructure gap.

  4. [Effects of core competency support program on depression and suicidal ideation for adolescents].

    Science.gov (United States)

    Park, Hyun Sook

    2009-12-01

    The purpose of this study was to evaluate the effects of a core competency support program on depression and suicidal ideation in adolescents. A quasi-experimental design was employed in this study. Participants for the study were high school students, 27 in the experimental group and 29 in the control group. Data were analyzed using the SPSS/WIN. 14.0 program with X(2) test, t-test, and ANCOVA. Participants in the core competency support program reported decreased depression scores significantly different from those in the control group. Participants in the core competency support program reported decreased suicidal ideation scores, also significantly different from those in the control group. The core competency support program was effective in decreasing depression and suicidal ideation for adolescents. Therefore, this approach is recommended as a suicide prevention strategy for adolescents.

  5. WIMS/PANTHER analysis of UO{sub 2}/MOX cores using embedded super-cells

    Energy Technology Data Exchange (ETDEWEB)

    Knight, M.; Bryce, P. [EDF Energy, Barnett Way, Barnwood, Gloucester (United Kingdom); Hall, S. [Advanced Modelling and Computation Group, Imperial College, London (United Kingdom)

    2012-07-01

    This paper describes a method of analysing PWR UO{sub 2}MOX cores with WIMS/PANTHER. Embedded super-cells, run within the reactor code, are used to correct the standard methodology of using 2-group smeared data from single assembly lattice calculations. In many other codes the weakness of this standard approach has been improved for MOX by imposing a more realistic environment in the lattice code, or by improving the sophistication of the reactor code. In this approach an intermediate set of calculations is introduced, leaving both lattice and reactor calculations broadly unchanged. The essence of the approach is that the whole core is broken down into a set of 'embedded' super-cells, each extending over just four quarter assemblies, with zero leakage imposed at the assembly mid-lines. Each supercell is solved twice, first with a detailed multi-group pin-by-pin solution, and then with the standard single assembly approach. Correction factors are defined by comparing the two solutions, and these can be applied in whole core calculations. The restriction that all such calculations are modelled with zero leakage means that they are independent of each other and of the core-wide flux shape. This allows parallel pre-calculation for the entire cycle once the loading pattern has been determined, in much the same way that single assembly lattice calculations can be pre-calculated once the range of fuel types is known. Comparisons against a whole core pin-by-pin reference demonstrates that the embedding process does not introduce a significant error, even after burnup and refuelling. Comparisons against a WIMS reference demonstrate that a pin-by-pin multi-group diffusion solution is capable of capturing the main interface effects. This therefore defines a practical approach for achieving results close to lattice code accuracy, but broadly at the cost of a standard reactor calculation. (authors)

  6. A safety design approach for sodium cooled fast reactor core toward commercialization in Japan

    International Nuclear Information System (INIS)

    Kubo, Shigenobu

    2012-01-01

    JAEA’s safety approach for SFR core design is based on defence‐in‐depth concept, which includes DBAs and DECs (prevention and mitigation): • The reactor core is designed to have inherent reactivity feedback characteristics with negative power coefficient. • Operation temperature range is set sufficiently below the coolant boiling temperature so as to avoid coolant boiling against anticipated operational occurrences and DBAs. • If the plant state deviates from operational states, the safe reactor shutdown is achieved by automatic insertion of control rods. 2 active reactor shutdown systems are provided. • Failure of active reactor shutdown is assumed in a design extension condition . Passive shutdown capability is provided by SASS under such condition. • As a design extension condition, core disruptive accident is assumed. In order to prevent severe mechanical energy release which might cause containment function failure, core sodium void worth is limited below 6 dollars and molten fuel discharge capability is utilized by FAIDUS. (author)

  7. Rules for design of nuclear graphite core components - some considerations and approaches

    International Nuclear Information System (INIS)

    Svalbonas, V.; Stilwell, T.C.; Zudans, Z.

    1978-01-01

    The use of graphite as a structural element presents unusual problems both for the designer and stress analysist. When the structure happens to be a nuclear reactor core, these problems are significantly magnified both by the environment and the attendant safety requirements. In the high temperature gas reactor (HTGR) core a large number of elements are constructed of nuclear graphite. This paper discusses the attendant difficulties, and presents some approaches, for ASME code safety-consistent design and analysis. The statistical scatter of material properties, which complicates even the definitions of allowable stress, as well as the brittle, anisotropic, inhomogeneous nature of the graphite was considered. The study of this subject was undertaken under contract to the U.S. Nuclear Regulatory Commission. (Auth.)

  8. Phylogenetic diversity in the core group of Peziza inferred from ITS sequences and morphology

    DEFF Research Database (Denmark)

    Hansen, K.; Læssøe, Thomas; Pfister, D.H.

    2002-01-01

    Species delimitation within the core group of Peziza is highly controversial. The group, typified by P. vesiculosa, is morphologically coherent and in previous analyses of LSU rDNA sequences it formed a highly supported clade. Phylogenetic diversity and species limits were investigated within......), shallowly cup- to disc-shaped apothecia (A) and large (up to 15 cm), deeply cup-shaped to expanded apothecia (B). The overall exciple structure (a stratified or non-stratified medullary layer) and to some degree spore surface relief, likewise support the groupings. Clade A contains taxa with smooth...... that populations on a diverse array of substrates may be closely related, or indeed, conspecific....

  9. Developing an OMERACT Core Outcome Set for Assessing Safety Components in Rheumatology Trials: The OMERACT Safety Working Group.

    Science.gov (United States)

    Klokker, Louise; Tugwell, Peter; Furst, Daniel E; Devoe, Dan; Williamson, Paula; Terwee, Caroline B; Suarez-Almazor, Maria E; Strand, Vibeke; Woodworth, Thasia; Leong, Amye L; Goel, Niti; Boers, Maarten; Brooks, Peter M; Simon, Lee S; Christensen, Robin

    2017-12-01

    Failure to report harmful outcomes in clinical research can introduce bias favoring a potentially harmful intervention. While core outcome sets (COS) are available for benefits in randomized controlled trials in many rheumatic conditions, less attention has been paid to safety in such COS. The Outcome Measures in Rheumatology (OMERACT) Filter 2.0 emphasizes the importance of measuring harms. The Safety Working Group was reestablished at the OMERACT 2016 with the objective to develop a COS for assessing safety components in trials across rheumatologic conditions. The safety issue has previously been discussed at OMERACT, but without a consistent approach to ensure harms were included in COS. Our methods include (1) identifying harmful outcomes in trials of interventions studied in patients with rheumatic diseases by a systematic literature review, (2) identifying components of safety that should be measured in such trials by use of a patient-driven approach including qualitative data collection and statistical organization of data, and (3) developing a COS through consensus processes including everyone involved. Members of OMERACT including patients, clinicians, researchers, methodologists, and industry representatives reached consensus on the need to continue the efforts on developing a COS for safety in rheumatology trials. There was a general agreement about the need to identify safety-related outcomes that are meaningful to patients, framed in terms that patients consider relevant so that they will be able to make informed decisions. The OMERACT Safety Working Group will advance the work previously done within OMERACT using a new patient-driven approach.

  10. Analysis of core-periphery organization in protein contact networks reveals groups of structurally and functionally critical residues.

    Science.gov (United States)

    Isaac, Arnold Emerson; Sinha, Sitabhra

    2015-10-01

    The representation of proteins as networks of interacting amino acids, referred to as protein contact networks (PCN), and their subsequent analyses using graph theoretic tools, can provide novel insights into the key functional roles of specific groups of residues. We have characterized the networks corresponding to the native states of 66 proteins (belonging to different families) in terms of their core-periphery organization. The resulting hierarchical classification of the amino acid constituents of a protein arranges the residues into successive layers - having higher core order - with increasing connection density, ranging from a sparsely linked periphery to a densely intra-connected core (distinct from the earlier concept of protein core defined in terms of the three-dimensional geometry of the native state, which has least solvent accessibility). Our results show that residues in the inner cores are more conserved than those at the periphery. Underlining the functional importance of the network core, we see that the receptor sites for known ligand molecules of most proteins occur in the innermost core. Furthermore, the association of residues with structural pockets and cavities in binding or active sites increases with the core order. From mutation sensitivity analysis, we show that the probability of deleterious or intolerant mutations also increases with the core order. We also show that stabilization centre residues are in the innermost cores, suggesting that the network core is critically important in maintaining the structural stability of the protein. A publicly available Web resource for performing core-periphery analysis of any protein whose native state is known has been made available by us at http://www.imsc.res.in/ ~sitabhra/proteinKcore/index.html.

  11. Core and peripheral criteria of video game addiction in the game addiction scale for adolescents.

    Science.gov (United States)

    Brunborg, Geir Scott; Hanss, Daniel; Mentzoni, Rune Aune; Pallesen, Ståle

    2015-05-01

    Assessment of video game addiction often involves measurement of peripheral criteria that indicate high engagement with games, and core criteria that indicate problematic use of games. A survey of the Norwegian population aged 16-74 years (N=10,081, response rate 43.6%) was carried out in 2013, which included the Gaming Addiction Scale for Adolescents (GAS). Confirmatory factor analysis showed that a two-factor structure, which separated peripheral criteria from core criteria, fitted the data better (CFI=0.963; RMSEA=0.058) compared to the original one-factor solution where all items are determined to load only on one factor (CFI=0.905, RMSEA=0.089). This was also found when we analyzed men aged ≤33 years, men aged >33 years, women aged ≤33 years, and women aged >33 years separately. This indicates that the GAS measures both engagement and problems related to video games. Multi-group measurement invariance testing showed that the factor structure was valid in all four groups (configural invariance) for the two-factor structure but not for the one-factor structure. A novel approach to categorization of problem gamers and addicted gamers where only the core criteria items are used (the CORE 4 approach) was compared to the approach where all items are included (the GAS 7 approach). The current results suggest that the CORE 4 approach might be more appropriate for classification of problem gamers and addicted gamers compared to the GAS 7 approach.

  12. The French initiative for scientific cores virtual curating : a user-oriented integrated approach

    Science.gov (United States)

    Pignol, Cécile; Godinho, Elodie; Galabertier, Bruno; Caillo, Arnaud; Bernardet, Karim; Augustin, Laurent; Crouzet, Christian; Billy, Isabelle; Teste, Gregory; Moreno, Eva; Tosello, Vanessa; Crosta, Xavier; Chappellaz, Jérome; Calzas, Michel; Rousseau, Denis-Didier; Arnaud, Fabien

    2016-04-01

    Managing scientific data is probably one the most challenging issue in modern science. The question is made even more sensitive with the need of preserving and managing high value fragile geological sam-ples: cores. Large international scientific programs, such as IODP or ICDP are leading an intense effort to solve this problem and propose detailed high standard work- and dataflows thorough core handling and curating. However most results derived from rather small-scale research programs in which data and sample management is generally managed only locally - when it is … The national excellence equipment program (Equipex) CLIMCOR aims at developing French facilities for coring and drilling investigations. It concerns indiscriminately ice, marine and continental samples. As part of this initiative, we initiated a reflexion about core curating and associated coring-data management. The aim of the project is to conserve all metadata from fieldwork in an integrated cyber-environment which will evolve toward laboratory-acquired data storage in a near future. In that aim, our demarche was conducted through an close relationship with field operators as well laboratory core curators in order to propose user-oriented solutions. The national core curating initiative currently proposes a single web portal in which all scientifics teams can store their field data. For legacy samples, this will requires the establishment of a dedicated core lists with associated metadata. For forthcoming samples, we propose a mobile application, under Android environment to capture technical and scientific metadata on the field. This application is linked with a unique coring tools library and is adapted to most coring devices (gravity, drilling, percussion, etc...) including multiple sections and holes coring operations. Those field data can be uploaded automatically to the national portal, but also referenced through international standards or persistent identifiers (IGSN, ORCID and INSPIRE

  13. A New Approach to Teaching Business Writing: Writing across the Core--A Document Based Curriculum

    Science.gov (United States)

    Hutchins, Teresa D.

    2015-01-01

    This paper describes the transition that the Anisfield School of Business of Ramapo College of New Jersey made from a conventional Writing Across the Curriculum approach to a Writing Across the Business Core approach. The impetus for the change is explained as well as the creation and design of the program. The document driven program is analyzed,…

  14. Approach to improve the axial power distribution for the application of a core protection system

    International Nuclear Information System (INIS)

    Koo, Bon Seung; Cho, Jin Young; Song, Jae Seung; Lee, Chung Chan

    2008-01-01

    A Core Protection Calculator System (CPCS) is a digital computer based on a safety system for generating trip signals based on a calculation of the Departure from Nucleate Boiling Ratio (DNBR) and the Local Power Density (LPD) by using several on-line measured system parameters including 3-level ex-core detector signals. A few approaches to improve the axial power distribution for the application of a core protection system were performed. For the Yonggwang unit 3 (cycle 1), axial power distributions were synthesized by applying the cubic spline method and compared with the neutronics code results. Several new cubic spline function sets were generated for the drastically distorted axial shapes for a 3-level ex-core detector system. In addition, synthesized axial shapes with a 5-level ex-core detector signals were compared with the conventional 3-level detector results. It demonstrates that the newly generated function sets appear to be better than that of the conventional CPC from the aspect of an axial power synthesis, particularly for the heavily distorted shapes. Moreover, synthesis of an axial power distribution using 5-level ex-core detector signals appears to be better than that of the 3-level ex-core detector signals. From the above results, improvement of the thermal margin is expected because of an uncertainty decreasing a core protection system. (authors)

  15. Global calculation of PWR reactor core using the two group energy solution by the response matrix method

    International Nuclear Information System (INIS)

    Conti, C.F.S.; Watson, F.V.

    1991-01-01

    A computational code to solve a two energy group neutron diffusion problem has been developed base d on the Response Matrix Method. That method solves the global problem of PWR core, without using the cross sections homogenization process, thus it is equivalent to a pontwise core calculation. The present version of the code calculates the response matrices by the first order perturbative method and considers developments on arbitrary order Fourier series for the boundary fluxes and interior fluxes. (author)

  16. Development and verification of a high performance multi-group SP3 transport capability in the ARTEMIS core simulator

    International Nuclear Information System (INIS)

    Van Geemert, Rene

    2008-01-01

    For satisfaction of future global customer needs, dedicated efforts are being coordinated internationally and pursued continuously at AREVA NP. The currently ongoing CONVERGENCE project is committed to the development of the ARCADIA R next generation core simulation software package. ARCADIA R will be put to global use by all AREVA NP business regions, for the entire spectrum of core design processes, licensing computations and safety studies. As part of the currently ongoing trend towards more sophisticated neutronics methodologies, an SP 3 nodal transport concept has been developed for ARTEMIS which is the steady-state and transient core simulation part of ARCADIA R . For enabling a high computational performance, the SP N calculations are accelerated by applying multi-level coarse mesh re-balancing. In the current implementation, SP 3 is about 1.4 times as expensive computationally as SP 1 (diffusion). The developed SP 3 solution concept is foreseen as the future computational workhorse for many-group 3D pin-by-pin full core computations by ARCADIA R . With the entire numerical workload being highly parallelizable through domain decomposition techniques, associated CPU-time requirements that adhere to the efficiency needs in the nuclear industry can be expected to become feasible in the near future. The accuracy enhancement obtainable by using SP 3 instead of SP 1 has been verified by a detailed comparison of ARTEMIS 16-group pin-by-pin SP N results with KAERI's DeCart reference results for the 2D pin-by-pin Purdue UO 2 /MOX benchmark. This article presents the accuracy enhancement verification and quantifies the achieved ARTEMIS-SP 3 computational performance for a number of 2D and 3D multi-group and multi-box (up to pin-by-pin) core computations. (authors)

  17. Nursing leadership in a chronic pain management group approach.

    Science.gov (United States)

    Dysvik, Elin; Furnes, Bodil

    2012-03-01

    To explore and debate nursing leadership and challenges on organizational and group levels when conducting rehabilitation groups for people suffering from chronic pain. Group approaches based on cognitive behavioural therapy are generally described as effective. Leadership in group approaches offered to people suffering from chronic pain is a great challenge for nurses on an organizational as well as a group level. One overall leader and nine group leaders conducting 13 groups constituted the sample. Qualitative content analysis was used by identifying categories, subthemes and themes. The results from the content analysis revealed one main theme ('Complexity in nursing leadership') and three subthemes ('Challenges in leadership on organizational level', 'Challenges in leadership on teamwork level' and 'Challenges in leadership on group level'. The results show how important it is to have firm overall leadership and trained group leaders with a common purpose, interdependent roles and complementary skills, who are thus well prepared to prevent or deal with challenging group processes. The leaders of both levels, which are highly interrelated, should have a current theoretical understanding of pain theory, group leadership skills and a cognitive behavioural approach. © 2012 Blackwell Publishing Ltd.

  18. Catalogue of generic plant states leading to core melt in PWRs: includes appendix 1: detailed description of sequences leading to core melt

    International Nuclear Information System (INIS)

    1996-11-01

    The Task Group on thermal-hydraulic system behaviour was given a mandate from PWG 2 on Coolant System-Behaviour with the approval of CSNI to deal with the topic of Accident Management. A writing group was set up to identify generic plant states leading to core melt for pressurized water reactors (PWR) and find 'possible approaches to accident management measures' (AM-Measures) for dealing with them. From a matrix of 15 initiating events and 12 system failures (i.e. from 180 possibilities), 32 event sequences have been identified as leading to core melt. Each sequence has been divided into characteristic plant state intervals according to safety function challenges. For each of the 141 defined characteristic plant state intervals, the members of the Writing Group made proposals for AM-Measures

  19. LMFR core and heat exchanger thermohydraulic design: former USSR and present Russian approaches

    International Nuclear Information System (INIS)

    1999-01-01

    The information presented in this report is dealing with liquid metal cooled fast reactors some of which are in operation (France, Japan, Russian federation) or under construction. Comprehensive thermal hydraulic research both experimental and numeric applied to such reactors was carried out in the Institute of Physics and Power Engineering (IPPE), Obninsk, Russian Federation. The IAEA Working Group on fast Reactors (IWGFR) recommended that IPPE should generalize its thermal hydraulic studies as well as results of other countries published previously in the field of liquid metal flow distribution and heat transfer in fuel pin and heat exchanger rod bundles (France, Germany, Japan, India, Russian Federation, United Kingdom and United States). The validity of computer codes and design approaches was proven by comparison of calculated results with measured values of velocity, pressure, temperature distributions in rod bundles cooled/heated by liquid metal, usually sodium. The report includes the methodology and philosophy of the analytical and experimental investigations when applied to core and heat exchanger thermal hydraulic design of Light Water Moderated Fast Reactors (LMFRs)

  20. Relative stability of core groups in pollination networks in a biodiversity hotspot over four years.

    Science.gov (United States)

    Fang, Qiang; Huang, Shuang-Quan

    2012-01-01

    Plants and their pollinators form pollination networks integral to the evolution and persistence of species in communities. Previous studies suggest that pollination network structure remains nested while network composition is highly dynamic. However, little is known about temporal variation in the structure and function of plant-pollinator networks, especially in species-rich communities where the strength of pollinator competition is predicted to be high. Here we quantify temporal variation of pollination networks over four consecutive years in an alpine meadow in the Hengduan Mountains biodiversity hotspot in China. We found that ranked positions and idiosyncratic temperatures of both plants and pollinators were more conservative between consecutive years than in non-consecutive years. Although network compositions exhibited high turnover, generalized core groups--decomposed by a k-core algorithm--were much more stable than peripheral groups. Given the high rate of turnover observed, we suggest that identical plants and pollinators that persist for at least two successive years sustain pollination services at the community level. Our data do not support theoretical predictions of a high proportion of specialized links within species-rich communities. Plants were relatively specialized, exhibiting less variability in pollinator composition at pollinator functional group level than at the species level. Both specialized and generalized plants experienced narrow variation in functional pollinator groups. The dynamic nature of pollination networks in the alpine meadow demonstrates the potential for networks to mitigate the effects of fluctuations in species composition in a high biodiversity area.

  1. ORGANIZATIONAL WORK GROUPS AND WORK TEAMS – APPROACHES AND DIFFERENCES

    Directory of Open Access Journals (Sweden)

    Raluca ZOLTAN

    2015-02-01

    Full Text Available Work groups and work teams represents basic structures of traditional and modern organizations, and during the time they have been intensively researched. However, managers often do not always consider the fundamental differences between groups and teams, which will lead to unrealistic goals and results below expectations. Thus, in the present paper we propose a review of the main researching approaches on groups and teams (psychosocial, socio-technical, and behavioral approach, in the third part of the paper being detailed the fundamental differences between groups and teams in the light of these approaches.

  2. An approach to model reactor core nodalization for deterministic safety analysis

    International Nuclear Information System (INIS)

    Salim, Mohd Faiz; Samsudin, Mohd Rafie; Mamat Ibrahim, Mohd Rizal; Roslan, Ridha; Sadri, Abd Aziz; Farid, Mohd Fairus Abd

    2016-01-01

    Adopting good nodalization strategy is essential to produce an accurate and high quality input model for Deterministic Safety Analysis (DSA) using System Thermal-Hydraulic (SYS-TH) computer code. The purpose of such analysis is to demonstrate the compliance against regulatory requirements and to verify the behavior of the reactor during normal and accident conditions as it was originally designed. Numerous studies in the past have been devoted to the development of the nodalization strategy for small research reactor (e.g. 250kW) up to the bigger research reactor (e.g. 30MW). As such, this paper aims to discuss the state-of-arts thermal hydraulics channel to be employed in the nodalization for RTP-TRIGA Research Reactor specifically for the reactor core. At present, the required thermal-hydraulic parameters for reactor core, such as core geometrical data (length, coolant flow area, hydraulic diameters, and axial power profile) and material properties (including the UZrH 1.6 , stainless steel clad, graphite reflector) have been collected, analyzed and consolidated in the Reference Database of RTP using standardized methodology, mainly derived from the available technical documentations. Based on the available information in the database, assumptions made on the nodalization approach and calculations performed will be discussed and presented. The development and identification of the thermal hydraulics channel for the reactor core will be implemented during the SYS-TH calculation using RELAP5-3D ® computer code. This activity presented in this paper is part of the development of overall nodalization description for RTP-TRIGA Research Reactor under the IAEA Norwegian Extra-Budgetary Programme (NOKEBP) mentoring project on Expertise Development through the Analysis of Reactor Thermal-Hydraulics for Malaysia, denoted as EARTH-M

  3. An approach to model reactor core nodalization for deterministic safety analysis

    Energy Technology Data Exchange (ETDEWEB)

    Salim, Mohd Faiz, E-mail: mohdfaizs@tnb.com.my; Samsudin, Mohd Rafie, E-mail: rafies@tnb.com.my [Nuclear Energy Department, Regulatory Economics & Planning Division, Tenaga Nasional Berhad (Malaysia); Mamat Ibrahim, Mohd Rizal, E-mail: m-rizal@nuclearmalaysia.gov.my [Prototypes & Plant Development Center, Malaysian Nuclear Agency (Malaysia); Roslan, Ridha, E-mail: ridha@aelb.gov.my; Sadri, Abd Aziz [Nuclear Installation Divisions, Atomic Energy Licensing Board (Malaysia); Farid, Mohd Fairus Abd [Reactor Technology Center, Malaysian Nuclear Agency (Malaysia)

    2016-01-22

    Adopting good nodalization strategy is essential to produce an accurate and high quality input model for Deterministic Safety Analysis (DSA) using System Thermal-Hydraulic (SYS-TH) computer code. The purpose of such analysis is to demonstrate the compliance against regulatory requirements and to verify the behavior of the reactor during normal and accident conditions as it was originally designed. Numerous studies in the past have been devoted to the development of the nodalization strategy for small research reactor (e.g. 250kW) up to the bigger research reactor (e.g. 30MW). As such, this paper aims to discuss the state-of-arts thermal hydraulics channel to be employed in the nodalization for RTP-TRIGA Research Reactor specifically for the reactor core. At present, the required thermal-hydraulic parameters for reactor core, such as core geometrical data (length, coolant flow area, hydraulic diameters, and axial power profile) and material properties (including the UZrH{sub 1.6}, stainless steel clad, graphite reflector) have been collected, analyzed and consolidated in the Reference Database of RTP using standardized methodology, mainly derived from the available technical documentations. Based on the available information in the database, assumptions made on the nodalization approach and calculations performed will be discussed and presented. The development and identification of the thermal hydraulics channel for the reactor core will be implemented during the SYS-TH calculation using RELAP5-3D{sup ®} computer code. This activity presented in this paper is part of the development of overall nodalization description for RTP-TRIGA Research Reactor under the IAEA Norwegian Extra-Budgetary Programme (NOKEBP) mentoring project on Expertise Development through the Analysis of Reactor Thermal-Hydraulics for Malaysia, denoted as EARTH-M.

  4. An approach to model reactor core nodalization for deterministic safety analysis

    Science.gov (United States)

    Salim, Mohd Faiz; Samsudin, Mohd Rafie; Mamat @ Ibrahim, Mohd Rizal; Roslan, Ridha; Sadri, Abd Aziz; Farid, Mohd Fairus Abd

    2016-01-01

    Adopting good nodalization strategy is essential to produce an accurate and high quality input model for Deterministic Safety Analysis (DSA) using System Thermal-Hydraulic (SYS-TH) computer code. The purpose of such analysis is to demonstrate the compliance against regulatory requirements and to verify the behavior of the reactor during normal and accident conditions as it was originally designed. Numerous studies in the past have been devoted to the development of the nodalization strategy for small research reactor (e.g. 250kW) up to the bigger research reactor (e.g. 30MW). As such, this paper aims to discuss the state-of-arts thermal hydraulics channel to be employed in the nodalization for RTP-TRIGA Research Reactor specifically for the reactor core. At present, the required thermal-hydraulic parameters for reactor core, such as core geometrical data (length, coolant flow area, hydraulic diameters, and axial power profile) and material properties (including the UZrH1.6, stainless steel clad, graphite reflector) have been collected, analyzed and consolidated in the Reference Database of RTP using standardized methodology, mainly derived from the available technical documentations. Based on the available information in the database, assumptions made on the nodalization approach and calculations performed will be discussed and presented. The development and identification of the thermal hydraulics channel for the reactor core will be implemented during the SYS-TH calculation using RELAP5-3D® computer code. This activity presented in this paper is part of the development of overall nodalization description for RTP-TRIGA Research Reactor under the IAEA Norwegian Extra-Budgetary Programme (NOKEBP) mentoring project on Expertise Development through the Analysis of Reactor Thermal-Hydraulics for Malaysia, denoted as EARTH-M.

  5. Effect of long-term isometric training on core/torso stiffness.

    Science.gov (United States)

    Lee, Benjamin C Y; McGill, Stuart M

    2015-06-01

    Although core stiffness enhances athletic performance traits, controversy exists regarding the effectiveness of isometric vs. dynamic core training methods. This study aimed to determine whether long-term changes in stiffness can be trained, and if so, what is the most effective method. Twenty-four healthy male subjects (23 ± 3 years; 1.8 ± 0.06 m; 77.5 ± 10.8 kg) were recruited for passive and active stiffness measurements before and after a 6-week core training intervention. Twelve subjects (22 ± 2 years; 1.8 ± 0.08 m; 78.3 ± 12.3 kg) were considered naive to physical and core exercise. The other 12 subjects (24 ± 3 years; 1.8 ± 0.05 m; 76.8 ± 9.7 kg) were Muay Thai athletes (savvy). A repeated-measures design compared core training methods (isometric vs. dynamic, with a control group) and subject training experience (naive vs. savvy) before and after a 6-week training period. Passive stiffness was assessed on a "frictionless" bending apparatus and active stiffness assessed through a quick release mechanism. Passive stiffness increased after the isometric training protocol. Dynamic training produced a smaller effect, and as expected, there was no change in the control group. Active stiffness did not change in any group. Comparisons between subject and training groups did not reveal any interactions. Thus, an isometric training approach was superior in terms of enhancing core stiffness. This is important since increased core stiffness enhances load bearing ability, arrests painful vertebral micromovements, and enhances ballistic distal limb movement. This may explain the efficacy reported for back and knee injury reduction.

  6. Thermohydraulic simulation of HTR-10 nuclear reactor core using realistic CFD approach

    International Nuclear Information System (INIS)

    Silva, Alexandro S.; Dominguez, Dany S.; Mazaira, Leorlen Y. Rojas; Hernandez, Carlos R.G.; Lira, Carlos Alberto Brayner de Oliveira

    2015-01-01

    High-temperature gas-cooled reactors (HTGRs) have the potential to be used as possible energy generation sources in the near future, owing to their inherently safe performance by using a large amount of graphite, low power density design, and high conversion efficiency. However, safety is the most important issue for its commercialization in nuclear energy industry. It is very important for safety design and operation of an HTGR to investigate its thermal–hydraulic characteristics. In this article, it was performed the thermal–hydraulic simulation of compressible flow inside the core of the pebble bed reactor HTR (High Temperature Reactor)-10 using Computational Fluid Dynamics (CFD). The realistic approach was used, where every closely packed pebble is realistically modelled considering a graphite layer and sphere of fuel. Due to the high computational cost is impossible simulate the full core; therefore, the geometry used is a column of FCC (Face Centered Cubic) cells, with 41 layers and 82 pebbles. The input data used were taken from the thermohydraulic IAEA Benchmark (TECDOC-1694). The results show the profiles of velocity and temperature of the coolant in the core, and the temperature distribution inside the pebbles. The maximum temperatures in the pebbles do not exceed the allowable limit for this type of nuclear fuel. (author)

  7. A multi-cycle optimization approach for low leakage in-core fuel management

    International Nuclear Information System (INIS)

    Cheng Pingdong; Shen Wei

    1999-01-01

    A new approach was developed to optimize pressurized waster reactor (PWR) low-leakage multi-cycle reload core design. The multi-cycle optimization process is carried out by the following three steps: The first step is a linear programming in search for an optimum power sharing distribution and optimum cycle length distribution for the successive several cycles to yield maximum multi-cycle total cycle length. In the second step, the fuel arrangement and burnable poison (BP) assignment are decoupled by using Haling power distribution and the optimum fuel arrangement is determined at the EOL in the absence of all BPs by employing a linear programming method or direct search method with objective function to force the calculated cycle length to be as close as possible to the optimum single cycle length obtained in the first step and with optimum power sharing distribution as additional constraints during optimization. In the third step, the BP assignment is optimized by the Flexible Tolerance Method (FTM) or linear programming method using the number of BP rods as control variable. The technology employed in the second and third steps was the usual decoupling method used in low-leakage core design. The first step was developed specially for multi-cycle optimization design and discussed in detail. Based on the proposed method a computer code MCYCO was encoded and tested for Qinshan Nuclear Power Plant (QNPP) low leakage reload core design. The multi-cycle optimization method developed, together with the program MCYCO, provides an applicable tool for solving the PWR low leakage reload core design problem

  8. Developing core elements and checklist items for global hospital antimicrobial stewardship programmes: a consensus approach.

    Science.gov (United States)

    Pulcini, C; Binda, F; Lamkang, A S; Trett, A; Charani, E; Goff, D A; Harbarth, S; Hinrichsen, S L; Levy-Hara, G; Mendelson, M; Nathwani, D; Gunturu, R; Singh, S; Srinivasan, A; Thamlikitkul, V; Thursky, K; Vlieghe, E; Wertheim, H; Zeng, M; Gandra, S; Laxminarayan, R

    2018-04-03

    With increasing global interest in hospital antimicrobial stewardship (AMS) programmes, there is a strong demand for core elements of AMS to be clearly defined on the basis of principles of effectiveness and affordability. To date, efforts to identify such core elements have been limited to Europe, Australia, and North America. The aim of this study was to develop a set of core elements and their related checklist items for AMS programmes that should be present in all hospitals worldwide, regardless of resource availability. A literature review was performed by searching Medline and relevant websites to retrieve a list of core elements and items that could have global relevance. These core elements and items were evaluated by an international group of AMS experts using a structured modified Delphi consensus procedure, using two-phased online in-depth questionnaires. The literature review identified seven core elements and their related 29 checklist items from 48 references. Fifteen experts from 13 countries in six continents participated in the consensus procedure. Ultimately, all seven core elements were retained, as well as 28 of the initial checklist items plus one that was newly suggested, all with ≥80% agreement; 20 elements and items were rephrased. This consensus on core elements for hospital AMS programmes is relevant to both high- and low-to-middle-income countries and could facilitate the development of national AMS stewardship guidelines and adoption by healthcare settings worldwide. Copyright © 2018 European Society of Clinical Microbiology and Infectious Diseases. All rights reserved.

  9. Core stability training on lower limb balance strength.

    Science.gov (United States)

    Dello Iacono, Antonio; Padulo, Johnny; Ayalon, Moshe

    2016-01-01

    This study aimed to assess the effects of core stability training on lower limbs' muscular asymmetries and imbalances in team sport. Twenty footballers were divided into two groups, either core stability or control group. Before each daily practice, core stability group (n = 10) performed a core stability training programme, while control group (n = 10) did a standard warm-up. The effects of the core stability training programme were assessed by performing isokinetic tests and single-leg countermovement jumps. Significant improvement was found for knee extensors peak torque at 3.14 rad · s(-1) (14%; P core stability group. The jump tests showed a significant reduction in the strength asymmetries in core stability group (-71.4%; P = 0.02) while a concurrent increase was seen in the control group (33.3%; P core exercises for optimal lower limbs strength balance development in young soccer players.

  10. Comparative Neutronics Analysis of DIMPLE S06 Criticality Benchmark with Contemporary Reactor Core Analysis Computer Code Systems

    Directory of Open Access Journals (Sweden)

    Wonkyeong Kim

    2015-01-01

    Full Text Available A high-leakage core has been known to be a challenging problem not only for a two-step homogenization approach but also for a direct heterogeneous approach. In this paper the DIMPLE S06 core, which is a small high-leakage core, has been analyzed by a direct heterogeneous modeling approach and by a two-step homogenization modeling approach, using contemporary code systems developed for reactor core analysis. The focus of this work is a comprehensive comparative analysis of the conventional approaches and codes with a small core design, DIMPLE S06 critical experiment. The calculation procedure for the two approaches is explicitly presented in this paper. Comprehensive comparative analysis is performed by neutronics parameters: multiplication factor and assembly power distribution. Comparison of two-group homogenized cross sections from each lattice physics codes shows that the generated transport cross section has significant difference according to the transport approximation to treat anisotropic scattering effect. The necessity of the ADF to correct the discontinuity at the assembly interfaces is clearly presented by the flux distributions and the result of two-step approach. Finally, the two approaches show consistent results for all codes, while the comparison with the reference generated by MCNP shows significant error except for another Monte Carlo code, SERPENT2.

  11. Extreme IR absorption in group IV-SiGeSn core-shell nanowires

    Science.gov (United States)

    Attiaoui, Anis; Wirth, Stephan; Blanchard-Dionne, André-Pierre; Meunier, Michel; Hartmann, J. M.; Buca, Dan; Moutanabbir, Oussama

    2018-06-01

    Sn-containing Si and Ge (Ge1-y-xSixSny) alloys are an emerging family of semiconductors with the potential to impact group IV material-based devices. These semiconductors provide the ability to independently engineer both the lattice parameter and bandgap, which holds the premise to develop enhanced or novel photonic and electronic devices. With this perspective, we present detailed investigations of the influence of Ge1-y-xSixSny layers on the optical properties of Si and Ge based heterostructures and nanowires. We found that by adding a thin Ge1-y-xSixSny capping layer on Si or Ge greatly enhances light absorption especially in the near infrared range, leading to an increase in short-circuit current density. For the Ge1-y-xSixSny structure at thicknesses below 30 nm, a 14-fold increase in the short-circuit current is observed with respect to bare Si. This enhancement decreases by reducing the capping layer thickness. Conversely, decreasing the shell thickness was found to improve the short-circuit current in Si/Ge1-y-xSixSny and Ge/Ge1-y-xSixSny core/shell nanowires. The optical absorption becomes very important by increasing the Sn content. Moreover, by exploiting an optical antenna effect, these nanowires show extreme light absorption, reaching an enhancement factor, with respect to Si or Ge nanowires, on the order of 104 in Si/Ge0.84Si0.04Sn0.12 and 12 in Ge/Ge0.84Si0.04Sn0.12. Furthermore, we analyzed the optical response after the addition of a dielectric layer of Si3N4 to the Si/Ge1-y-xSixSny core-shell nanowire and found approximatively a 50% increase in the short-circuit current density for a dielectric layer of thickness equal to 45 nm and both a core radius and a shell thickness greater than 40 nm. The core-shell optical antenna benefits from a multiplication of enhancements contributed by leaky mode resonances in the semiconductor part and antireflection effects in the dielectric part.

  12. AGR core safety assessment methodologies

    International Nuclear Information System (INIS)

    McLachlan, N.; Reed, J.; Metcalfe, M.P.

    1996-01-01

    To demonstrate the safety of its gas-cooled graphite-moderated AGR reactors, nuclear safety assessments of the cores are based upon a methodology which demonstrates no component failures, geometrical stability of the structure and material properties bounded by a database. All AGRs continue to meet these three criteria. However, predictions of future core behaviour indicate that the safety case methodology will eventually need to be modified to deal with new phenomena. A new approach to the safety assessment of the cores is currently under development, which can take account of these factors while at the same time providing the same level of protection for the cores. This approach will be based on the functionality of the core: unhindered movement of control rods, continued adequate cooling of the fuel and the core, continued ability to charge and discharge fuel. (author). 5 figs

  13. Effects of core models and neutron energy group structures on xenon oscillation in large graphite-moderated reactors

    International Nuclear Information System (INIS)

    Yamasita, Kiyonobu; Harada, Hiroo; Murata, Isao; Shindo, Ryuichi; Tsuruoka, Takuya.

    1993-01-01

    Xenon oscillations of large graphite-moderated reactors have been analyzed by a multi-group diffusion code with two- and three-dimensional core models to study the effects of the geometric core models and the neutron energy group structures on the evaluation of the Xe oscillation behavior. The study clarified the following. It is important for accurate Xe oscillation simulations to use the neutron energy group structure that describes well the large change in the absorption cross section of Xe in the thermal energy range of 0.1∼0.65 eV, because the energy structure in this energy range has significant influences on the amplitude and the period of oscillations in power distributions. Two-dimensional R-Z models can be used instead of three-dimensional R-θ-Z models for evaluation of the threshold power of Xe oscillation, but two-dimensional R-θ models cannot be used for evaluation of the threshold power. Although the threshold power evaluated with the R-θ-Z models coincides with that of the R-Z models, it does not coincide with that of the R-θ models. (author)

  14. Group theoretic approaches to nuclear and hadronic collective motion

    International Nuclear Information System (INIS)

    Biedenharn, L.C.

    1982-01-01

    Three approaches to nuclear and hadronic collective motion are reviewed, compared and contrasted: the standard symmetry approach as typified by the Interacting Boson Model, the kinematic symmetry group approach of Gell-Mann and Tomonaga, and the recent direct construction by Buck. 50 references

  15. Group theoretic approaches to nuclear and hadronic collective motion

    Energy Technology Data Exchange (ETDEWEB)

    Biedenharn, L.C.

    1982-01-01

    Three approaches to nuclear and hadronic collective motion are reviewed, compared and contrasted: the standard symmetry approach as typified by the Interacting Boson Model, the kinematic symmetry group approach of Gell-Mann and Tomonaga, and the recent direct construction by Buck. 50 references.

  16. Soft timing closure for soft programmable logic cores: The ARGen approach

    OpenAIRE

    Bollengier , Théotime; Lagadec , Loïc; Najem , Mohamad; Le Lann , Jean-Christophe; Guilloux , Pierre

    2017-01-01

    International audience; Reconfigurable cores support post-release updates which shortens time-to-market while extending circuits’ lifespan. Reconfigurable cores can be provided as hard cores (ASIC) or soft cores (RTL). Soft reconfigurable cores outperform hard reconfigurable cores by preserving the ASIC synthesis flow, at the cost of lowering scalability but also exacerbating timing closure issues. This article tackles these two issues and introduces the ARGen generator that produces scalable...

  17. DIANA Code: Design and implementation of an analytic core calculus code by two group, two zone diffusion

    International Nuclear Information System (INIS)

    Mochi, Ignacio

    2005-01-01

    The principal parameters of nuclear reactors are determined in the conceptual design stage.For that purpose, it is necessary to have flexible calculation tools that represent the principal dependencies of such parameters.This capability is of critical importance in the design of innovative nuclear reactors.In order to have a proper tool that could assist the conceptual design of innovative nuclear reactors, we developed and implemented a neutronic core calculus code: DIANA (Diffusion Integral Analytic Neutron Analysis).To calculate the required parameters, this code generates its own cross sections using an analytic two group, two zones diffusion scheme based only on a minimal set of data (i.e. 2200 m/s and fission averaged microscopic cross sections, Wescott factors and Effective Resonance Integrals).Both to calculate cross sections and core parameters, DIANA takes into account heterogeneity effects that are included when it evaluates each zone.Among them lays the disadvantage factor of each energy group.DIANA was totally implemented through Object Oriented Programming using C++ language. This eases source code understanding and would allow a quick expansion of its capabilities if needed.The final product is a versatile and easy-to-use code that allows core calculations with a minimal amount of data.It also contains the required tools needed to perform many variational calculations such as the parameterisation of effective multiplication factors for different radii of the core.The diffusion scheme s simplicity allows an easy following of the involved phenomena, making DIANA the most suitable tool to design reactors whose physics lays beyond the parameters of present reactors.All this reasons make DIANA a good candidate for future innovative reactor analysis

  18. A Group Approach in a Community Empowerment: A Case Study of Waste Recycling Group in Jakarta

    Science.gov (United States)

    Hadiyanti, Puji

    2016-01-01

    This study reviews a group approach in empowering the community through waste recycling activities related to the development of human resources in Jakarta. The specific objectives to be achieved are the wish to understand and find: (1) Conditions of waste recycling empowerment in Jakarta, (2) Mechanisms of a group approach in empowering…

  19. Nursing physical assessment for patient safety in general wards: reaching consensus on core skills.

    Science.gov (United States)

    Douglas, Clint; Booker, Catriona; Fox, Robyn; Windsor, Carol; Osborne, Sonya; Gardner, Glenn

    2016-07-01

    To determine consensus across acute care specialty areas on core physical assessment skills necessary for early recognition of changes in patient status in general wards. Current approaches to physical assessment are inconsistent and have not evolved to meet increased patient and system demands. New models of nursing assessment are needed in general wards that ensure a proactive and patient safety approach. A modified Delphi study. Focus group interviews with 150 acute care registered nurses at a large tertiary referral hospital generated a framework of core skills that were developed into a web-based survey. We then sought consensus with a panel of 35 senior acute care registered nurses following a classical Delphi approach over three rounds. Consensus was predefined as at least 80% agreement for each skill across specialty areas. Content analysis of focus group transcripts identified 40 discrete core physical assessment skills. In the Delphi rounds, 16 of these were consensus validated as core skills and were conceptually aligned with the primary survey: (Airway) Assess airway patency; (Breathing) Measure respiratory rate, Evaluate work of breathing, Measure oxygen saturation; (Circulation) Palpate pulse rate and rhythm, Measure blood pressure by auscultation, Assess urine output; (Disability) Assess level of consciousness, Evaluate speech, Assess for pain; (Exposure) Measure body temperature, Inspect skin integrity, Inspect and palpate skin for signs of pressure injury, Observe any wounds, dressings, drains and invasive lines, Observe ability to transfer and mobilise, Assess bowel movements. Among a large and diverse group of experienced acute care registered nurses consensus was achieved on a structured core physical assessment to detect early changes in patient status. Although further research is needed to refine the model, clinical application should promote systematic assessment and clinical reasoning at the bedside. © 2016 John Wiley & Sons Ltd.

  20. A Practical Approach to Implementing the Core Competencies in a Child and Adolescent Psychiatry Residency Program

    Science.gov (United States)

    Dingle, Arden D.; Sexson, Sandra B.

    2007-01-01

    Objective: The authors describe the development and implementation of the Accreditation Council for Graduate Medical Education's core competencies in a child and adolescent psychiatry residency program. Method: The authors identify the program's organizational approach and participants and detail various strategies and methods of defining,…

  1. Development of a Draft Core Set of Domains for Measuring Shared Decision Making in Osteoarthritis: An OMERACT Working Group on Shared Decision Making

    Science.gov (United States)

    Toupin April, Karine; Barton, Jennifer; Fraenkel, Liana; Li, Linda; Grandpierre, Viviane; Guillemin, Francis; Rader, Tamara; Stacey, Dawn; Légaré, France; Jull, Janet; Petkovic, Jennifer; Scholte Voshaar, Marieke; Welch, Vivian; Lyddiatt, Anne; Hofstetter, Cathie; De Wit, Maarten; March, Lyn; Meade, Tanya; Christensen, Robin; Gaujoux-Viala, Cécile; Suarez-Almazor, Maria E.; Boonen, Annelies; Pohl, Christoph; Martin, Richard; Tugwell, Peter

    2015-01-01

    Objective Despite the importance of shared decision making for delivering patient-centred care in rheumatology, there is no consensus on how to measure its process and outcomes. The aim of this OMERACT working group is to determine the core set of domains for measuring shared decision making in intervention studies in adults with osteoarthritis (OA), from the perspective of patients, health professionals and researchers. Methods We followed the OMERACT Filter 2.0 to develop a draft core domain set, which consisted of: (i) forming an OMERACT working group; (ii) conducting a review of domains of shared decision making; and (iii) obtaining the opinions of stakeholders using a modified nominal group process held at a session activity at the OMERACT 2014 meeting. Results 26 stakeholders from Europe, North America and Australia, including 5 patient research partners, participated in the session activity. Participants identified the following domains for measuring shared decision making to be included as part of the Draft Core Set: 1) Identifying the decision; 2) Exchanging Information; 3) Clarifying views; 4) Deliberating; 5) Making the decision; 6) Putting the decision into practice; and 7) Assessing the impact of the decision. Contextual factors were also suggested. Conclusion We propose a Draft Core Set of shared decision making domains for OA intervention research studies. Next steps include a workshop at OMERACT 2016 to reach consensus on these proposed domains in the wider OMERACT group, as well as detail sub-domains and assess instruments to develop a Core Outcome Measurement Set. PMID:25877502

  2. Development of a Draft Core Set of Domains for Measuring Shared Decision Making in Osteoarthritis: An OMERACT Working Group on Shared Decision Making.

    Science.gov (United States)

    Toupin-April, Karine; Barton, Jennifer; Fraenkel, Liana; Li, Linda; Grandpierre, Viviane; Guillemin, Francis; Rader, Tamara; Stacey, Dawn; Légaré, France; Jull, Janet; Petkovic, Jennifer; Scholte-Voshaar, Marieke; Welch, Vivian; Lyddiatt, Anne; Hofstetter, Cathie; De Wit, Maarten; March, Lyn; Meade, Tanya; Christensen, Robin; Gaujoux-Viala, Cécile; Suarez-Almazor, Maria E; Boonen, Annelies; Pohl, Christoph; Martin, Richard; Tugwell, Peter S

    2015-12-01

    Despite the importance of shared decision making for delivering patient-centered care in rheumatology, there is no consensus on how to measure its process and outcomes. The aim of this Outcome Measures in Rheumatology (OMERACT) working group is to determine the core set of domains for measuring shared decision making in intervention studies in adults with osteoarthritis (OA), from the perspectives of patients, health professionals, and researchers. We followed the OMERACT Filter 2.0 method to develop a draft core domain set by (1) forming an OMERACT working group; (2) conducting a review of domains of shared decision making; and (3) obtaining opinions of all those involved using a modified nominal group process held at a session activity at the OMERACT 12 meeting. In all, 26 people from Europe, North America, and Australia, including 5 patient research partners, participated in the session activity. Participants identified the following domains for measuring shared decision making to be included as part of the draft core set: (1) identifying the decision, (2) exchanging information, (3) clarifying views, (4) deliberating, (5) making the decision, (6) putting the decision into practice, and (7) assessing the effect of the decision. Contextual factors were also suggested. We proposed a draft core set of shared decision-making domains for OA intervention research studies. Next steps include a workshop at OMERACT 13 to reach consensus on these proposed domains in the wider OMERACT group, as well as to detail subdomains and assess instruments to develop a core outcome measurement set.

  3. The Effect of Core Stability Training on Functional Movement Patterns in Collegiate Athletes.

    Science.gov (United States)

    Bagherian, Sajad; Ghasempoor, Khodayar; Rahnama, Nader; Wikstrom, Erik A

    2018-02-06

    Pre-participation examinations are the standard approach for assessing poor movement quality that would increase musculoskeletal injury risk. However, little is known about how core stability influences functional movement patterns. The primary purpose of this study was to determine the effect of an 8-week core stability program on functional movement patterns in collegiate athletes. The secondary purpose was to determine if the core stability training program would be more effective in those with worse movement quality (i.e. ≤14 baseline FMS score). Quasi-experimental design. Athletic Training Facility. One-hundred collegiate athletes. Functional movement patterns included the Functional Movement Screen (FMS), Lateral step down (LSD) and Y balance test (YBT) and were assessed before and after the 8-week program. Participants were placed into 1 of the 2 groups: intervention and control. The intervention group was required to complete a core stability training program that met 3 times per week for 8-week. Significant group x time interactions demonstrated improvements in FMS, LSD and YBT scores in the experimental group relative to the control group (pcore stability training program enhances functional movement patterns and dynamic postural control in collegiate athletes. The benefits are more pronounced in collegiate athletes with poor movement quality.

  4. LMFBR Ultra Long Life Cores

    International Nuclear Information System (INIS)

    Schmidt, J.E.; Doncals, R.A.; Porter, C.A.; Gundy, L.M.

    1986-01-01

    The Ultra Long Life Core is an attractive and innovative design approach with several extremely beneficial attributes. Long Life cores are applicable to the full range of LMR plant sizes resulting in lifetimes up to 30 years. Core life is somewhat limited for smaller plant sizes, however significant benefits of this approach still exist for all plant sizes. The union of long life cores and the complementary inherent safety technology offer a means of utilizing the well-proven oxide fuel in a system with unsurpassed safety capability. A further benefit is that the uranium fuel cycle can be used in long life cores, especially for initial LMR plant deployment, thereby eliminating the need for reprocessing prior to starting LMR plant construction in the U.S. Finally the long life core significantly reduces power costs. With inherent safety capability designed into an LMR and with the ULLC fuel cycle, power costs competitive with light water plants are achievable while offering improved operational flexibility derived through extending refueling intervals

  5. Group manifold approach to gravity and supergravity theories

    International Nuclear Information System (INIS)

    d'Auria, R.; Fre, P.; Regge, T.

    1981-05-01

    Gravity theories are presented from the point of view of group manifold formulation. The differential geometry of groups and supergroups is discussed first; the notion of connection and related Yang-Mills potentials is introduced. Then ordinary Einstein gravity is discussed in the Cartan formulation. This discussion provides a first example which will then be generalized to more complicated theories, in particular supergravity. The distinction between ''pure'' and ''impure' theories is also set forth. Next, the authors develop an axiomatic approach to rheonomic theories related to the concept of Chevalley cohomology on group manifolds, and apply these principles to N = 1 supergravity. Then the panorama of so far constructed pure and impure group manifold supergravities is presented. The pure d = 5 N = 2 case is discussed in some detail, and N = 2 and N = 3 in d = 4 are considered as examples of the impure theories. The way a pure theory becomes impure after dimensional reduction is illustrated. Next, the role of kinematical superspace constraints as a subset of the group-manifold equations of motion is discussed, and the use of this approach to obtain the auxiliary fields is demonstrated. Finally, the application of the group manifold method to supersymmetric Super Yang-Mills theories is addressed

  6. Quantum Computing: a Quantum Group Approach

    OpenAIRE

    Wang, Zhenghan

    2013-01-01

    There is compelling theoretical evidence that quantum physics will change the face of information science. Exciting progress has been made during the last two decades towards the building of a large scale quantum computer. A quantum group approach stands out as a promising route to this holy grail, and provides hope that we may have quantum computers in our future.

  7. Recent advances on thermohydraulic simulation of HTR-10 nuclear reactor core using realistic CFD approach

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Alexandro S., E-mail: alexandrossilva@ifba.edu.br [Instituto Federal de Educacao, Ciencia e Tecnologia da Bahia (IFBA), Vitoria da Conquista, BA (Brazil); Mazaira, Leorlen Y.R., E-mail: leored1984@gmail.com, E-mail: cgh@instec.cu [Instituto Superior de Tecnologias y Ciencias Aplicadas (INSTEC), La Habana (Cuba); Dominguez, Dany S.; Hernandez, Carlos R.G., E-mail: alexandrossilva@gmail.com, E-mail: dsdominguez@gmail.com [Universidade Estadual de Santa Cruz (UESC), Ilheus, BA (Brazil). Programa de Pos-Graduacao em Modelagem Computacional; Lira, Carlos A.B.O., E-mail: cabol@ufpe.br [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil)

    2015-07-01

    High-temperature gas-cooled reactors (HTGRs) have the potential to be used as possible energy generation sources in the near future, owing to their inherently safe performance by using a large amount of graphite, low power density design, and high conversion efficiency. However, safety is the most important issue for its commercialization in nuclear energy industry. It is very important for safety design and operation of an HTGR to investigate its thermal-hydraulic characteristics. In this article, it was performed the thermal-hydraulic simulation of compressible flow inside the core of the pebble bed reactor HTR (High Temperature Reactor)-10 using Computational Fluid Dynamics (CFD). The realistic approach was used, where every closely packed pebble is realistically modelled considering a graphite layer and sphere of fuel. Due to the high computational cost is impossible simulate the full core; therefore, the geometry used is a FCC (Face Centered Cubic) cell with the half height of the core, with 21 layers and 95 pebbles. The input data used were taken from the thermal-hydraulic IAEA Bechmark. The results show the profiles of velocity and temperature of the coolant in the core, and the temperature distribution inside the pebbles. The maximum temperatures in the pebbles do not exceed the allowable limit for this type of nuclear fuel. (author)

  8. Recent advances on thermohydraulic simulation of HTR-10 nuclear reactor core using realistic CFD approach

    International Nuclear Information System (INIS)

    Silva, Alexandro S.; Mazaira, Leorlen Y.R.; Dominguez, Dany S.; Hernandez, Carlos R.G.

    2015-01-01

    High-temperature gas-cooled reactors (HTGRs) have the potential to be used as possible energy generation sources in the near future, owing to their inherently safe performance by using a large amount of graphite, low power density design, and high conversion efficiency. However, safety is the most important issue for its commercialization in nuclear energy industry. It is very important for safety design and operation of an HTGR to investigate its thermal-hydraulic characteristics. In this article, it was performed the thermal-hydraulic simulation of compressible flow inside the core of the pebble bed reactor HTR (High Temperature Reactor)-10 using Computational Fluid Dynamics (CFD). The realistic approach was used, where every closely packed pebble is realistically modelled considering a graphite layer and sphere of fuel. Due to the high computational cost is impossible simulate the full core; therefore, the geometry used is a FCC (Face Centered Cubic) cell with the half height of the core, with 21 layers and 95 pebbles. The input data used were taken from the thermal-hydraulic IAEA Bechmark. The results show the profiles of velocity and temperature of the coolant in the core, and the temperature distribution inside the pebbles. The maximum temperatures in the pebbles do not exceed the allowable limit for this type of nuclear fuel. (author)

  9. Two Step Procedure Using a 1-D Slab Spectral Geometry in a Pebble Bed Reactor Core Analysis

    International Nuclear Information System (INIS)

    Lee, Hyun Chul; Kim, Kang Seog; Noh, Jae Man; Joo, Hyung Kook

    2005-01-01

    A strong spectral interaction between the core and the reflector has been one of the main concerns in the analysis of pebble bed reactor cores. To resolve this problem, VSOP adopted iteration between the spectrum calculation in a spectral zone and the global core calculation. In VSOP, the whole problem domain is divided into many spectral zones in which the fine group spectrum is calculated using bucklings for fast groups and albedos for thermal groups from the global core calculation. The resulting spectrum in each spectral zone is used to generate broad group cross sections of the spectral zone for the global core calculation. In this paper, we demonstrate a two step procedure in a pebble bed reactor core analysis. In the first step, we generate equivalent cross sections from a 1-D slab spectral geometry model with the help of the equivalence theory. The equivalent cross sections generated in this way include the effect of the spectral interaction between the core and the reflector. In the second step, we perform a diffusion calculation using the equivalent cross sections generated in the first step. A simple benchmark problem derived from the PMBR-400 Reactor was introduced to verify this approach. We compared the two step solutions with the Monte Carlo (MC) solutions for the problem

  10. Probing charge transfer dynamics in self-assembled monolayers by core hole clock approach

    International Nuclear Information System (INIS)

    Zharnikov, Michael

    2015-01-01

    This article reviews recent progress in the application of core hole clock approach in the framework of resonant Auger electron spectroscopy to the monomolecular assembles of alkyl, oligophenyl, and oligo(phenylene–ethynylene) based molecules on Au(1 1 1) substrates, referring mostly to the work by the author et al. The major goal was to study electron transfer (ET) dynamics in these systems serving as prototypes of molecular electronics (ME) devices. The ET pathway to the conductive substrate was unambiguously defined by resonant excitation of the nitrile tailgroup attached to the molecular backbone. Characteristic ET times within the femtosecond domain were determined, along with the attenuation factors for the ET dynamics, analogous to the case of the static transport. The above parameters were found to exhibit strong dependence on the character of the molecular orbital which mediates the ET process. In addition, certain spectral features, which can be associated with an inverse ET from the molecular backbone to the excitation site, were observed upon exchange of the nitrile group by strongly electronegative nitro moiety. The reported results represent a valuable input for theory and a certain potential for applications such as ME devices where optimization of ET can have significant technological impact.

  11. Cyclical convergence of Central and Eastern European countries to the Euro area core. New methodological approach

    Directory of Open Access Journals (Sweden)

    Ileana ALEXE

    2013-04-01

    Full Text Available The current paper develops an analysis on the degree of business cycle convergence of the new member states of the EU towards the Euro area core (Germany, France, Italy, Belgium, Netherlands and Luxembourg during 1996 – 2010.Unlike the previous research, the study takes into consideration the similarity of cycles, and not their synchronization. Furthermore, from the methodological point of view, it explores the use of survey indicators in the analysis of the cycles, thus in addition to the traditional approach that employs the GDP. The results obtained through clusterization show that the degree of convergence towards Euro area core remains modest.

  12. Efficient approach for simulating response of multi-body structure in reactor core subjected to seismic loading

    International Nuclear Information System (INIS)

    Zhang Hongkun; Cen Song; Wang Haitao; Cheng Huanyu

    2012-01-01

    An efficient 3D approach is proposed for simulating the complicated responses of the multi-body structure in reactor core under seismic loading. By utilizing the rigid-body and connector functions of the software Abaqus, the multi-body structure of the reactor core is simplified as a mass-point system interlinked by spring-dashpot connectors. And reasonable schemes are used for determining various connector coefficients. Furthermore, a scripting program is also complied for the 3D parametric modeling. Numerical examples show that, the proposed method can not only produce the results which satisfy the engineering requirements, but also improve the computational efficiency more than 100 times. (authors)

  13. In-vessel core degradation code validation matrix update 1996-1999. Report by an OECD/NEA group of experts

    International Nuclear Information System (INIS)

    2001-02-01

    In 1991 the Committee on the Safety of Nuclear Installations (CSNI) issued a State-of-the-Art Report (SOAR) on In-Vessel Core Degradation in Light Water Reactor (LWR) Severe Accidents. Based on the recommendations of this report a Validation Matrix for severe accident modelling codes was produced. Experiments performed up to the end of 1993 were considered for this validation matrix. To include recent experiments and to enlarge the scope, an update was formally inaugurated in January 1999 by the Task Group on Degraded Core Cooling, a sub-group of Principal Working Group 2 (PWG-2) on Coolant System Behaviour, and a selection of writing group members was commissioned. The present report documents the results of this study. The objective of the Validation Matrix is to define a basic set of experiments, for which comparison of the measured and calculated parameters forms a basis for establishing the accuracy of test predictions, covering the full range of in-vessel core degradation phenomena expected in light water reactor severe accident transients. The emphasis is on integral experiments, where interactions amongst key phenomena as well as the phenomena themselves are explored; however separate-effects experiments are also considered especially where these extend the parameter ranges to cover those expected in postulated LWR severe accident transients. As well as covering PWR and BWR designs of Western origin, the scope of the review has been extended to Eastern European (VVER) types. Similarly, the coverage of phenomena has been extended, starting as before from the initial heat-up but now proceeding through the in-core stage to include introduction of melt into the lower plenum and further to core coolability and retention to the lower plenum, with possible external cooling. Items of a purely thermal hydraulic nature involving no core degradation are excluded, having been covered in other validation matrix studies. Concerning fission product behaviour, the effect

  14. Supporting Unemployed, Middle-Aged Men: A Psychoeducational Group Approach

    Science.gov (United States)

    Murphey, Charlotte M.; Shillingford, M. Ann

    2012-01-01

    This article presents a comprehensive group counseling approach to support unemployed, middle-aged men. An inclusive group curriculum designed to provide support and address potential mental health issues related to unemployment is introduced. The focus of the group is divided into 6 major areas that research has shown to have a significant impact…

  15. Feminist Group Process in Seminar Classes: Possibilities and Challenges

    Science.gov (United States)

    Barrett, Betty J.

    2009-01-01

    In this essay, I describe my experience applying the principles of feminist group process in a senior level social science course. I begin by providing an overview of feminist pedagogy as an approach to teaching and learning and discuss the relevance of feminist group process within this model. I then highlight the core components of feminist…

  16. ASTRID core: Design objectives, design approach, and R&D in support

    International Nuclear Information System (INIS)

    Mignot, G.; Devictor, N.

    2012-01-01

    ASTRID core design is mainly guided by safety objectives: 1. Prevention of the core meltdown accident: To prevent meltdown accidents: - by a natural behavior of the core and the reactor (no actuation of the two shutdown systems); - with adding passive complementary systems if natural behavior is not sufficient for some transient cases. 2. Mitigation of the fusion accident: To garantee that core fusion accidents don’t lead to significant mechanical energy release, whatever initiator event: - by a natural core behavior; - with adding specific mitigation dispositions in case of natural behavior is not suffficient

  17. Development of an Analytic Nodal Diffusion Solver in Multi-groups for 3D Reactor Cores with Rectangular or Hexagonal Assemblies

    Energy Technology Data Exchange (ETDEWEB)

    Lozano, Juan Andres; Aragones, Jose Maria; Garcia-Herranz, Nuria [Universidad Politecnica de Madrid, 28006 Jose Gutierrez Abascal 2, Madrid (Spain)

    2008-07-01

    More accurate modelling of physical phenomena involved in present and future nuclear reactors requires a multi-scale and multi-physics approach. This challenge can be accomplished by the coupling of best-estimate core-physics, thermal-hydraulics and multi-physics solvers. In order to make viable that coupling, the current trends in reactor simulations are along the development of a new generation of tools based on user-friendly, modular, easily linkable, faster and more accurate codes to be integrated in common platforms. These premises are in the origin of the NURESIM Integrated Project within the 6. European Framework Program, which is envisaged to provide the initial step towards a Common European Standard Software Platform for nuclear reactors simulations. In the frame of this project and to reach the above-mentioned goals, a 3-D multigroup nodal solver for neutron diffusion calculations called ANDES (Analytic Nodal Diffusion Equation Solver) has been developed and tested in-depth in this Thesis. ANDES solves the steady-state and time-dependent neutron diffusion equation in three-dimensions and any number of energy groups, utilizing the Analytic Coarse-Mesh Finite-Difference (ACMFD) scheme to yield the nodal coupling equations. It can be applied to both Cartesian and triangular-Z geometries, so that simulations of LWR as well as VVER, HTR and fast reactors can be performed. The solver has been implemented in a fully encapsulated way, enabling it as a module to be readily integrated in other codes and platforms. In fact, it can be used either as a stand-alone nodal code or as a solver to accelerate the convergence of whole core pin-by-pin code systems. Verification of performance has shown that ANDES is a code with high order definition for whole core realistic nodal simulations. In this paper, the methodology developed and involved in ANDES is presented. (authors)

  18. An approach to grouping species for ecological risk assessment

    International Nuclear Information System (INIS)

    Hampton, N.L.; VanHorn, R.L.; Morris, R.; Brewer, R.

    1994-01-01

    The ecological risk assessment (ERA) paradigm acknowledges all levels of ecological organization as having potential for defining assessment and measurement endpoints. However, assessment goals and endpoints are generally concentrated at individual species and population levels. As part of a sitewide, screening-level ERA process at the Idaho National Engineering Laboratory (INEL), a ''functional group'' approach was developed to incorporate assessment at a higher level of ecological organization into the risk analysis process. Functional groups demonstrating biological similarity and similar potential for contaminant exposure were developed using taxonomic, trophic and habitat parameters. As defined, all species are potential surrogates for the other members of the same functional group. Measurement endpoint data for several species may be integrated to address the risk to the group as a whole. The functional group concept was applied throughout the problem formulation, analysis, and risk characterization phases of the assessment process. This approach allows the ERA to be focused on risk to the integrity of individual functional groups, which can subsequently be related to guild and community integrity

  19. Holocene eruptive activity of Yufu-Tsurumi volcano group found from piston cores in Beppu bay, Central Kyushu; Beppuwan core kara mita Yufu Tsurumi kazangun ni okeru kanshinsei no funka katsudo

    Energy Technology Data Exchange (ETDEWEB)

    Umeda, K. [Power Reactor and Nuclear Fuel Development Corp., Tokyo (Japan); Kusanagi, M. [Kobe University, Kobe (Japan); Furusawa, A. [Dia Consultants Co. Ltd., Nagoya (Japan); Ui, T. [Hokkaido University, Sapporo (Japan)

    1996-08-01

    With an objective to identify the Holocene eruptive activity of the Yufu-Tsurumi volcano group, analysis was made on the volcanic ash, Yufu-dake 1 (a product of the latest eruptive activity). The analysis used piston core samples collected in Beppu Bay. Volcanic ash deposited in lakes and inner bays are not subjected to erosion effect, hence remain in better condition than on-land deposits. A volcanic ash bed characteristically containing micro-crystal contained glass has existed, and so has a volcanic ash bed characteristically containing volcanic foam glass and polyhedral glass. The volcanic ash bed characteristically containing micro-crystal contained glass was found comparable with the Yufu-dake 1 volcanic ash bed originated in the Yufu-Tsurumi volcanic group, as proven from the stratigraphy, rock statement and refraction of the volcanic glass. As a result of performing a {sup 14}C age measurement on seashells in the core samples by using an accelerator mass analysis method, it was found that the eruption age of the Yufu-dake 1 volcanic ash dates back about 2,500 years ago. Core samples collected from lakes and inner bays contain much carbonic material used in the {sup 14}C age measurement. Therefore, investigation on volcanic ash deposited on ocean bottoms is effective. 25 refs., 7 figs., 3 tabs.

  20. [Construction of the addiction prevention core competency model for preventing addictive behavior in adolescents].

    Science.gov (United States)

    Park, Hyun Sook; Jung, Sun Young

    2013-12-01

    This study was done to provide fundamental data for the development of competency reinforcement programs to prevent addictive behavior in adolescents through the construction and examination of an addiction prevention core competency model. In this study core competencies for preventing addictive behavior in adolescents through competency modeling were identified, and the addiction prevention core competency model was developed. It was validated methodologically. Competencies for preventing addictive behavior in adolescents as defined by the addiction prevention core competency model are as follows: positive self-worth, self-control skill, time management skill, reality perception skill, risk coping skill, and positive communication with parents and with peers or social group. After construction, concurrent cross validation of the addiction prevention core competency model showed that this model was appropriate. The study results indicate that the addiction prevention core competency model for the prevention of addictive behavior in adolescents through competency modeling can be used as a foundation for an integral approach to enhance adolescent is used as an adjective and prevent addictive behavior. This approach can be a school-centered, cost-efficient strategy which not only reduces addictive behavior in adolescents, but also improves the quality of their resources.

  1. A cultural psychological approach to evangelical faith healing groups

    NARCIS (Netherlands)

    van Saane, J.W.

    2010-01-01

    From the perspective of Belzen, a cultural approach for the psychology of religion is necessary to cope with the multiplicity of the religious phenomenon. He presents research of specific - very closed - religious groups to illustrate this point. A cultural approach is not limited to these specific

  2. LMFR core thermohydraulics: Status and prospects

    International Nuclear Information System (INIS)

    2000-06-01

    One of the fundamental steps for a successful reactor core thermohydraulic design is the capability to predict, reliably and accurately, the temperature distribution in the core assemblies. A detailed knowledge of the assembly and fuel pin thermohydraulic behaviour in the steady state and transient conditions is an indispensable prerequisite to safe and stable operation of the reactor. Considerable experimental and theoretical studies on various aspects of LMFR core thermohydraulics are necessary to acquire such knowledge. During the last decade, there have been substantial advances in fast reactor core thermohydraulic design and operation in several countries with fast reactor programmes (notably in France, the Russian Federation, Japan, the United Kingdom, Germany and the United States of America). Chief among these has been the demonstration of reliable operation of reactor cores at a high burnup. During the last years, some additional countries such as China, India and the Republic of Korea have launched new fast reactor programmes. International exchange of information and experience on LMFR development including core thermohydraulic design is becoming of increasing importance to these countries. It is with this focus that the IAEA convened the Technical Committee on 'Methods and Codes for Calculations of Thermohydraulic Parameters for Fuel, Absorber Pins and Assemblies of LMFR's with Traditional and Burner Cores'. This meeting, attended by participants from seven countries, brought together a group of international experts to review and discuss the thermohydraulic advances and design approaches providing a reliable, safe and robust reactor core, as well as to exchange the experience accumulated in different countries of using the codes for thermohydraulic calculations and to discuss the issues requiring further research and development. A total of thirty technical papers presented covered theoretical and computational issues as well as experiments under

  3. Functional renormalization group approach to the two dimensional Bose gas

    Energy Technology Data Exchange (ETDEWEB)

    Sinner, A; Kopietz, P [Institut fuer Theoretische Physik, Universitaet Frankfurt, Max-von-Laue Strasse 1, 60438 Frankfurt (Germany); Hasselmann, N [International Center for Condensed Matter Physics, Universidade de BrasIlia, Caixa Postal 04667, 70910-900 BrasIlia, DF (Brazil)], E-mail: hasselma@itp.uni-frankfurt.de, E-mail: sinner@itp.uni-frankfurt.de

    2009-02-01

    We investigate the small frequency and momentum structure of the weakly interacting Bose gas in two dimensions using a functional renormalization group approach. The flow equations are derived within a derivative approximation of the effective action up to second order in spatial and temporal variables and investigated numerically. The truncation we employ is based on the perturbative structure of the theory and is well described as a renormalization group enhanced perturbation theory. It allows to calculate corrections to the Bogoliubov spectrum and to investigate the damping of quasiparticles. Our approach allows to circumvent the divergences which plague the usual perturbative approach.

  4. Outcomes of polio eradication activities in Uttar Pradesh, India: the Social Mobilization Network (SM Net and Core Group Polio Project (CGPP

    Directory of Open Access Journals (Sweden)

    Singh Vibha

    2011-05-01

    Full Text Available Abstract Background The primary strategy to interrupt transmission of wild poliovirus in India is to improve supplemental immunization activities and routine immunization coverage in priority districts with a focus on 107 high-risk blocks of western Uttar Pradesh and central Bihar. Villages or urban areas with a history of wild poliovirus transmission, or hard-to-reach or resistant populations are categorized as high-risk areas within blocks. The Social Mobilization Network (SM Net was formed in Uttar Pradesh in 2003 to support polio eradication efforts through improved planning, implementation and monitoring of social mobilization activities in those high-risk areas. In this paper, we examine the vaccination outcomes in districts of SM Net where the CORE Group works. Methods We carried out a secondary data analysis of routine monitoring information collected by the SM Net and the Government of India. These data include information about vaccination outcomes in SM Net areas and non-SM Net areas within the districts where the CORE Group operates. Statistical analysis was used to compare, between SM Net and non-SM Net areas, vaccination outcomes considered sensitive to social mobilization efforts of the SM Net. We employed Generalized Estimating Equations (GEE statistical method to account for Intra-cluster Correlation (ICC, and used 'Quasi-likelihood under the independence model criterion (QIC' as the model selection method. Results Vaccination outcomes in SM Net areas were as high as or higher than in non-SM Net areas. There was considerable variation in vaccination outcomes between districts. Conclusions While not conclusive, the results suggest that the social mobilization efforts of the SM Net and the CORE Group are helping to increase vaccination levels in high-risk areas of Uttar Pradesh. Vaccination outcomes in CORE Group areas were equal or higher than in non-CORE, non-SM Net areas. This occurred even though SM Net areas are those with

  5. A Semiparametric Bayesian Approach for Analyzing Longitudinal Data from Multiple Related Groups.

    Science.gov (United States)

    Das, Kiranmoy; Afriyie, Prince; Spirko, Lauren

    2015-11-01

    Often the biological and/or clinical experiments result in longitudinal data from multiple related groups. The analysis of such data is quite challenging due to the fact that groups might have shared information on the mean and/or covariance functions. In this article, we consider a Bayesian semiparametric approach of modeling the mean trajectories for longitudinal response coming from multiple related groups. We consider matrix stick-breaking process priors on the group mean parameters which allows information sharing on the mean trajectories across the groups. Simulation studies are performed to demonstrate the effectiveness of the proposed approach compared to the more traditional approaches. We analyze data from a one-year follow-up of nutrition education for hypercholesterolemic children with three different treatments where the children are from different age-groups. Our analysis provides more clinically useful information than the previous analysis of the same dataset. The proposed approach will be a very powerful tool for analyzing data from clinical trials and other medical experiments.

  6. An Informal Overview of the Unitary Group Approach

    International Nuclear Information System (INIS)

    Sonnad, V.; Escher, J.; Kruse, M.; Baker, R.

    2016-01-01

    The Unitary Groups Approach (UGA) is an elegant and conceptually unified approach to quantum structure calculations. It has been widely used in molecular structure calculations, and holds the promise of a single computational approach to structure calculations in a variety of different fields. We explore the possibility of extending the UGA to computations in atomic and nuclear structure as a simpler alternative to traditional Racah algebra-based approaches. We provide a simple introduction to the basic UGA and consider some of the issues in using the UGA with spin-dependent, multi-body Hamiltonians requiring multi-shell bases adapted to additional symmetries. While the UGA is perfectly capable of dealing with such problems, it is seen that the complexity rises dramatically, and the UGA is not at this time, a simpler alternative to Racah algebra-based approaches.

  7. Application of Integral Ex-Core and Differential In-Core Neutron Measurements for Adjustment of Fuel Burn-Up Distributions in VVER-1000

    Science.gov (United States)

    Borodkin, Pavel G.; Borodkin, Gennady I.; Khrennikov, Nikolay N.

    2010-10-01

    The paper deals with calculational and semi-analytical evaluations of VVER-1000 reactor core neutron source distributions and their influence on measurements and calculations of the integral through-vessel neutron leakage. Time-integrated neutron source distributions used for DORT calculations were prepared by two different approaches based on a) calculated fuel burn-up (standard routine procedure) and b) in-core measurements by means of SPD & TC (new approach). Taking into account that fuel burn-up distributions in operating VVER may be evaluated now by analytical methods (calculations) only it is needed to develop new approaches for testing and correction of calculational evaluations. Results presented in this paper allow to consider a reverse task of alternative estimation of fuel burn-up distributions. The approach proposed is based on adjustment (fitting) of time-integrated neutron source distributions, and hence fuel burn-up patterns in some part of reactor core, on the base of ex-core neutron leakage measurement, neutron-physical calculation and in-core SPD & TC measurement data.

  8. "Non-equilibrium" block copolymer micelles with glassy cores: a predictive approach based on theory of equilibrium micelles.

    Science.gov (United States)

    Nagarajan, Ramanathan

    2015-07-01

    Micelles generated in water from most amphiphilic block copolymers are widely recognized to be non-equilibrium structures. Typically, the micelles are prepared by a kinetic process, first allowing molecular scale dissolution of the block copolymer in a common solvent that likes both the blocks and then gradually replacing the common solvent by water to promote the hydrophobic blocks to aggregate and create the micelles. The non-equilibrium nature of the micelle originates from the fact that dynamic exchange between the block copolymer molecules in the micelle and the singly dispersed block copolymer molecules in water is suppressed, because of the glassy nature of the core forming polymer block and/or its very large hydrophobicity. Although most amphiphilic block copolymers generate such non-equilibrium micelles, no theoretical approach to a priori predict the micelle characteristics currently exists. In this work, we propose a predictive approach for non-equilibrium micelles with glassy cores by applying the equilibrium theory of micelles in two steps. In the first, we calculate the properties of micelles formed in the mixed solvent while true equilibrium prevails, until the micelle core becomes glassy. In the second step, we freeze the micelle aggregation number at this glassy state and calculate the corona dimension from the equilibrium theory of micelles. The condition when the micelle core becomes glassy is independently determined from a statistical thermodynamic treatment of diluent effect on polymer glass transition temperature. The predictions based on this "non-equilibrium" model compare reasonably well with experimental data for polystyrene-polyethylene oxide diblock copolymer, which is the most extensively studied system in the literature. In contrast, the application of the equilibrium model to describe such a system significantly overpredicts the micelle core and corona dimensions and the aggregation number. The non-equilibrium model suggests ways to

  9. Nuclear reactor core stabilizing arrangement

    International Nuclear Information System (INIS)

    Jabsen, F.S.

    1976-01-01

    A nuclear reactor core stabilizing arrangement is described wherein a plurality of actuators, disposed in a pattern laterally surrounding a group of elongated fuel assemblies, press against respective contiguous fuel assemblies on the periphery of the group to reduce the clearance between adjacent fuel assemblies thereby forming a more compacted, vibration resistant core structure. 7 claims, 4 drawing figures

  10. Graded core/shell semiconductor nanorods and nanorod barcodes

    Science.gov (United States)

    Alivisatos, A. Paul; Scher, Erik C.; Manna, Liberato

    2010-12-14

    Graded core/shell semiconductor nanorods and shaped nanorods are disclosed comprising Group II-VI, Group III-V and Group IV semiconductors and methods of making the same. Also disclosed are nanorod barcodes using core/shell nanorods where the core is a semiconductor or metal material, and with or without a shell. Methods of labeling analytes using the nanorod barcodes are also disclosed.

  11. Wetting transitions: A functional renormalization-group approach

    International Nuclear Information System (INIS)

    Fisher, D.S.; Huse, D.A.

    1985-01-01

    A linear functional renormalization group is introduced as a framework in which to treat various wetting transitions of films on substrates. A unified treatment of the wetting transition in three dimensions with short-range interactions is given. The results of Brezin, Halperin, and Leibler in their three different regimes are reproduced along with new results on the multicritical behavior connecting the various regimes. In addition, the critical behavior as the coexistence curve is approached at complete wetting is analyzed. Wetting in the presence of long-range substrate-film interactions that fall off as power laws is also studied. The possible effects of the nonlinear terms in the renormalization group are examined briefly and it appears that they do not alter the critical behavior found using the truncated linear renormalization group

  12. Error Analysis of High Frequency Core Loss Measurement for Low-Permeability Low-Loss Magnetic Cores

    DEFF Research Database (Denmark)

    Niroumand, Farideh Javidi; Nymand, Morten

    2016-01-01

    in magnetic cores is B-H loop measurement where two windings are placed on the core under test. However, this method is highly vulnerable to phase shift error, especially for low-permeability, low-loss cores. Due to soft saturation and very low core loss, low-permeability low-loss magnetic cores are favorable...... in many of the high-efficiency high power-density power converters. Magnetic powder cores, among the low-permeability low-loss cores, are very attractive since they possess lower magnetic losses in compared to gapped ferrites. This paper presents an analytical study of the phase shift error in the core...... loss measuring of low-permeability, low-loss magnetic cores. Furthermore, the susceptibility of this measurement approach has been analytically investigated under different excitations. It has been shown that this method, under square-wave excitation, is more accurate compared to sinusoidal excitation...

  13. Core Genome Multilocus Sequence Typing for Identification of Globally Distributed Clonal Groups and Differentiation of Outbreak Strains of Listeria monocytogenes.

    Science.gov (United States)

    Chen, Yi; Gonzalez-Escalona, Narjol; Hammack, Thomas S; Allard, Marc W; Strain, Errol A; Brown, Eric W

    2016-10-15

    Many listeriosis outbreaks are caused by a few globally distributed clonal groups, designated clonal complexes or epidemic clones, of Listeria monocytogenes, several of which have been defined by classic multilocus sequence typing (MLST) schemes targeting 6 to 8 housekeeping or virulence genes. We have developed and evaluated core genome MLST (cgMLST) schemes and applied them to isolates from multiple clonal groups, including those associated with 39 listeriosis outbreaks. The cgMLST clusters were congruent with MLST-defined clonal groups, which had various degrees of diversity at the whole-genome level. Notably, cgMLST could distinguish among outbreak strains and epidemiologically unrelated strains of the same clonal group, which could not be achieved using classic MLST schemes. The precise selection of cgMLST gene targets may not be critical for the general identification of clonal groups and outbreak strains. cgMLST analyses further identified outbreak strains, including those associated with recent outbreaks linked to contaminated French-style cheese, Hispanic-style cheese, stone fruit, caramel apple, ice cream, and packaged leafy green salad, as belonging to major clonal groups. We further developed lineage-specific cgMLST schemes, which can include accessory genes when core genomes do not possess sufficient diversity, and this provided additional resolution over species-specific cgMLST. Analyses of isolates from different common-source listeriosis outbreaks revealed various degrees of diversity, indicating that the numbers of allelic differences should always be combined with cgMLST clustering and epidemiological evidence to define a listeriosis outbreak. Classic multilocus sequence typing (MLST) schemes targeting internal fragments of 6 to 8 genes that define clonal complexes or epidemic clones have been widely employed to study L. monocytogenes biodiversity and its relation to pathogenicity potential and epidemiology. We demonstrated that core genome MLST

  14. Critical asymmetry in renormalization group theory for fluids.

    Science.gov (United States)

    Zhao, Wei; Wu, Liang; Wang, Long; Li, Liyan; Cai, Jun

    2013-06-21

    The renormalization-group (RG) approaches for fluids are employed to investigate critical asymmetry of vapour-liquid equilibrium (VLE) of fluids. Three different approaches based on RG theory for fluids are reviewed and compared. RG approaches are applied to various fluid systems: hard-core square-well fluids of variable ranges, hard-core Yukawa fluids, and square-well dimer fluids and modelling VLE of n-alkane molecules. Phase diagrams of simple model fluids and alkanes described by RG approaches are analyzed to assess the capability of describing the VLE critical asymmetry which is suggested in complete scaling theory. Results of thermodynamic properties obtained by RG theory for fluids agree with the simulation and experimental data. Coexistence diameters, which are smaller than the critical densities, are found in the RG descriptions of critical asymmetries of several fluids. Our calculation and analysis show that the approach coupling local free energy with White's RG iteration which aims to incorporate density fluctuations into free energy is not adequate for VLE critical asymmetry due to the inadequate order parameter and the local free energy functional used in the partition function.

  15. Influence of core-finishing intervals on tensile strength of cast posts-and-cores luted with zinc phosphate cement

    Directory of Open Access Journals (Sweden)

    Michele Andrea Lopes Iglesias

    2012-08-01

    Full Text Available The core finishing of cast posts-and-cores after luting is routine in dental practice. However, the effects of the vibrations produced by the rotary cutting instruments over the luting cements are not well-documented. This study evaluated the influence of the time intervals that elapsed between the cementation and the core-finishing procedures on the tensile strength of cast posts-and-cores luted with zinc phosphate cement. Forty-eight bovine incisor roots were selected, endodontically treated, and divided into four groups (n = 12: GA, control (without finishing; GB, GC, and GD, subjected to finishing at 20 minutes, 60 minutes, and 24 hours after cementation, respectively. Root canals were molded, and the resin patterns were cast in copper-aluminum alloy. Cast posts-and-cores were luted with zinc phosphate cement, and the core-finishing procedures were applied according to the groups. The tensile tests were performed at a crosshead speed of 0.5 mm/min for all groups, 24 hours after the core-finishing procedures. The data were subjected to one-way analysis of variance (ANOVA and Tukey's test (α = 0.05. No significant differences were observed in the tensile strengths between the control and experimental groups, regardless of the time interval that elapsed between the luting and finishing steps. Within the limitations of the present study, it was demonstrated that the core-finishing procedures and time intervals that elapsed after luting did not appear to affect the retention of cast posts-and-cores when zinc phosphate cement was used.

  16. A minimalist functional group (MFG) approach for surrogate fuel formulation

    KAUST Repository

    Abdul Jameel, Abdul Gani

    2018-03-20

    Surrogate fuel formulation has drawn significant interest due to its relevance towards understanding combustion properties of complex fuel mixtures. In this work, we present a novel approach for surrogate fuel formulation by matching target fuel functional groups, while minimizing the number of surrogate species. Five key functional groups; paraffinic CH, paraffinic CH, paraffinic CH, naphthenic CH–CH and aromatic C–CH groups in addition to structural information provided by the Branching Index (BI) were chosen as matching targets. Surrogates were developed for six FACE (Fuels for Advanced Combustion Engines) gasoline target fuels, namely FACE A, C, F, G, I and J. The five functional groups present in the fuels were qualitatively and quantitatively identified using high resolution H Nuclear Magnetic Resonance (NMR) spectroscopy. A further constraint was imposed in limiting the number of surrogate components to a maximum of two. This simplifies the process of surrogate formulation, facilitates surrogate testing, and significantly reduces the size and time involved in developing chemical kinetic models by reducing the number of thermochemical and kinetic parameters requiring estimation. Fewer species also reduces the computational expenses involved in simulating combustion in practical devices. The proposed surrogate formulation methodology is denoted as the Minimalist Functional Group (MFG) approach. The MFG surrogates were experimentally tested against their target fuels using Ignition Delay Times (IDT) measured in an Ignition Quality Tester (IQT), as specified by the standard ASTM D6890 methodology, and in a Rapid Compression Machine (RCM). Threshold Sooting Index (TSI) and Smoke Point (SP) measurements were also performed to determine the sooting propensities of the surrogates and target fuels. The results showed that MFG surrogates were able to reproduce the aforementioned combustion properties of the target FACE gasolines across a wide range of conditions

  17. A minimalist functional group (MFG) approach for surrogate fuel formulation

    KAUST Repository

    Abdul Jameel, Abdul Gani; Naser, Nimal; Issayev, Gani; Touitou, Jamal; Ghosh, Manik Kumer; Emwas, Abdul-Hamid M.; Farooq, Aamir; Dooley, Stephen; Sarathy, Mani

    2018-01-01

    Surrogate fuel formulation has drawn significant interest due to its relevance towards understanding combustion properties of complex fuel mixtures. In this work, we present a novel approach for surrogate fuel formulation by matching target fuel functional groups, while minimizing the number of surrogate species. Five key functional groups; paraffinic CH, paraffinic CH, paraffinic CH, naphthenic CH–CH and aromatic C–CH groups in addition to structural information provided by the Branching Index (BI) were chosen as matching targets. Surrogates were developed for six FACE (Fuels for Advanced Combustion Engines) gasoline target fuels, namely FACE A, C, F, G, I and J. The five functional groups present in the fuels were qualitatively and quantitatively identified using high resolution H Nuclear Magnetic Resonance (NMR) spectroscopy. A further constraint was imposed in limiting the number of surrogate components to a maximum of two. This simplifies the process of surrogate formulation, facilitates surrogate testing, and significantly reduces the size and time involved in developing chemical kinetic models by reducing the number of thermochemical and kinetic parameters requiring estimation. Fewer species also reduces the computational expenses involved in simulating combustion in practical devices. The proposed surrogate formulation methodology is denoted as the Minimalist Functional Group (MFG) approach. The MFG surrogates were experimentally tested against their target fuels using Ignition Delay Times (IDT) measured in an Ignition Quality Tester (IQT), as specified by the standard ASTM D6890 methodology, and in a Rapid Compression Machine (RCM). Threshold Sooting Index (TSI) and Smoke Point (SP) measurements were also performed to determine the sooting propensities of the surrogates and target fuels. The results showed that MFG surrogates were able to reproduce the aforementioned combustion properties of the target FACE gasolines across a wide range of conditions

  18. A group-based approach to stabilisation and symptom management in a phased treatment model for refugees and asylum seekers

    Directory of Open Access Journals (Sweden)

    Mary E. A. Robertson

    2013-12-01

    Full Text Available Background: Traumatised asylum seekers and refugees may present with significant and complex mental health problems as a result of prolonged, extreme, and multiple traumatic events. This is further complicated by ongoing complex social circumstances. Concepts: In our work at the Traumatic Stress Clinic (TSC, the understanding afforded by the concept of complex posttraumatic stress disorder (PTSD together with the related notion of a phased treatment model, provides a useful framework for organising our work with this population. Clinical Applications: An explication of complex PTSD as it applies to our client group is presented, followed by a description of our phased treatment model and an outline of the core principles, which guide our clinical approach. Our symptom management and stabilisation groups have been developed and refined over time and draw on techniques from a variety of cognitive behavioural therapies. These are described in some detail with illustrative clinical case vignettes. Conclusion: This paper concludes with some reflections on the challenges inherent to working with this complex client group.

  19. Age groups related glioblastoma study based on radiomics approach.

    Science.gov (United States)

    Li, Zeju; Wang, Yuanyuan; Yu, Jinhua; Guo, Yi; Zhang, Qi

    2017-12-01

    Glioblastoma is the most aggressive malignant brain tumor with poor prognosis. Radiomics is a newly emerging and promising technique to reveal the complex relationships between high-throughput medical image features and deep information of disease including pathology, biomarkers and genomics. An approach was developed to investigate the internal relationship between magnetic resonance imaging (MRI) features and the age-related origins of glioblastomas based on a quantitative radiomics method. A fully automatic image segmentation method was applied to segment the tumor regions from three dimensional MRI images. 555 features were then extracted from the image data. By analyzing large numbers of quantitative image features, some predictive and prognostic information could be obtained by the radiomics approach. 96 patients diagnosed with glioblastoma pathologically have been divided into two age groups (age groups (T test, p age difference (T test, p= .006). In conclusion, glioblastoma in different age groups present different radiomics-feature patterns with statistical significance, which indicates that glioblastoma in different age groups should have different pathologic, protein, or genic origins.

  20. Group-theoretical approach to relativistic eikonal physics

    Energy Technology Data Exchange (ETDEWEB)

    Leon, J; Quiros, M [Instituto de Enstructura de la Materia, C.S.I.C., Madrid (Spain); Departamento de Matematica, Universidad Complutense, Campus de Alcala (Spain)); Ramirez Mittelbrunn, J [Instituto de Estructura de la Materia, C.S.I.C., Madrid (Spain)

    1977-09-01

    A contraction of the Poincare group is performed leading to the eikonal approximation. Invariants, one-particle states, spinning particles and some interaction problems are studied with the following results: momenta of ultrarelativistic particles behave as lightlike, the little group being E/sub 2/, spin behaves as that of zero-mass particles, helicity being conserved in the presence of interactions. The full eikonal results are rederived for Green's functions, wave functions, etc. The way for computing corrections due to transverse momenta and spin-dependent interactions is outlined. A parallel analysis is made for the infinite-momentum frame, the similarities and differences between this formalism and the eikonal approach being disclosed.

  1. Measuring core inflation in India: An asymmetric trimmed mean approach

    Directory of Open Access Journals (Sweden)

    Naresh Kumar Sharma

    2015-12-01

    Full Text Available The paper seeks to obtain an optimal asymmetric trimmed mean-based core inflation measure in the class of trimmed mean measures when the distribution of price changes is leptokurtic and skewed to the right for any given period. Several estimators based on asymmetric trimmed mean approach are constructed and estimates generated by use of these estimators are evaluated on the basis of certain established empirical criteria. The paper also provides the method of trimmed mean expression “in terms of percentile score.” This study uses 69 monthly price indices which are constituent components of Wholesale Price Index for the period, April 1994 to April 2009, with 1993–1994 as the base year. Results of the study indicate that an optimally trimmed estimator is found when we trim 29.5% from the left-hand tail and 20.5% from the right-hand tail of the distribution of price changes.

  2. Generation of multigroup cross-sections from micro-group ones in code system SUHAM-U used for VVER-1000 reactor core calculations with MOX loading

    Energy Technology Data Exchange (ETDEWEB)

    Boyarinov, V.F.; Davidenko, V.D.; Polismakov, A.A.; Tsybulsky, V.F. [RRC Kurchatov Institute, Moscow (Russian Federation)

    2005-07-01

    At the present time, the new code system SUHAM-U for calculation of the neutron-physical processes in nuclear reactor core with triangular and square lattices based both on the modern micro-group (about 7000 groups) cross-sections library of code system UNK and on solving the multigroup (up to 89 groups) neutron transport equation by Surface Harmonics Method is elaborated. In this paper the procedure for generation of multigroup cross-sections from micro-group ones for calculation of VVER-1000 reactor core with MOX loading is described. The validation has consisted in computing VVER-1000 fuel assemblies with uranium and MOX fuel and has shown enough high accuracy under corresponding selection of the number and boundaries of the energy groups. This work has been fulfilled in the frame of ISTC project 'System Analyses of Nuclear Safety for VVER Reactors with MOX Fuels'.

  3. Group investigation with scientific approach in mathematics learning

    Science.gov (United States)

    Indarti, D.; Mardiyana; Pramudya, I.

    2018-03-01

    The aim of this research is to find out the effect of learning model toward mathematics achievement. This research is quasi-experimental research. The population of research is all VII grade students of Karanganyar regency in the academic year of 2016/2017. The sample of this research was taken using stratified cluster random sampling technique. Data collection was done based on mathematics achievement test. The data analysis technique used one-way ANOVA following the normality test with liliefors method and homogeneity test with Bartlett method. The results of this research is the mathematics learning using Group Investigation learning model with scientific approach produces the better mathematics learning achievement than learning with conventional model on material of quadrilateral. Group Investigation learning model with scientific approach can be used by the teachers in mathematics learning, especially in the material of quadrilateral, which is can improve the mathematics achievement.

  4. Linear mixed-effects modeling approach to FMRI group analysis.

    Science.gov (United States)

    Chen, Gang; Saad, Ziad S; Britton, Jennifer C; Pine, Daniel S; Cox, Robert W

    2013-06-01

    Conventional group analysis is usually performed with Student-type t-test, regression, or standard AN(C)OVA in which the variance-covariance matrix is presumed to have a simple structure. Some correction approaches are adopted when assumptions about the covariance structure is violated. However, as experiments are designed with different degrees of sophistication, these traditional methods can become cumbersome, or even be unable to handle the situation at hand. For example, most current FMRI software packages have difficulty analyzing the following scenarios at group level: (1) taking within-subject variability into account when there are effect estimates from multiple runs or sessions; (2) continuous explanatory variables (covariates) modeling in the presence of a within-subject (repeated measures) factor, multiple subject-grouping (between-subjects) factors, or the mixture of both; (3) subject-specific adjustments in covariate modeling; (4) group analysis with estimation of hemodynamic response (HDR) function by multiple basis functions; (5) various cases of missing data in longitudinal studies; and (6) group studies involving family members or twins. Here we present a linear mixed-effects modeling (LME) methodology that extends the conventional group analysis approach to analyze many complicated cases, including the six prototypes delineated above, whose analyses would be otherwise either difficult or unfeasible under traditional frameworks such as AN(C)OVA and general linear model (GLM). In addition, the strength of the LME framework lies in its flexibility to model and estimate the variance-covariance structures for both random effects and residuals. The intraclass correlation (ICC) values can be easily obtained with an LME model with crossed random effects, even at the presence of confounding fixed effects. The simulations of one prototypical scenario indicate that the LME modeling keeps a balance between the control for false positives and the sensitivity

  5. Core Genome Multilocus Sequence Typing for Identification of Globally Distributed Clonal Groups and Differentiation of Outbreak Strains of Listeria monocytogenes

    OpenAIRE

    Chen, Yi; Gonzalez-Escalona, Narjol; Hammack, Thomas S.; Allard, Marc W.; Strain, Errol A.; Brown, Eric W.

    2016-01-01

    ABSTRACT Many listeriosis outbreaks are caused by a few globally distributed clonal groups, designated clonal complexes or epidemic clones, of Listeria monocytogenes, several of which have been defined by classic multilocus sequence typing (MLST) schemes targeting 6 to 8 housekeeping or virulence genes. We have developed and evaluated core genome MLST (cgMLST) schemes and applied them to isolates from multiple clonal groups, including those associated with 39 listeriosis outbreaks. The cgMLST...

  6. Fluorescence lifetime measurements to determine the core-shell nanostructure of FITC-doped silica nanoparticles: An optical approach to evaluate nanoparticle photostability

    International Nuclear Information System (INIS)

    Santra, Swadeshmukul; Liesenfeld, Bernd; Bertolino, Chiara; Dutta, Debamitra; Cao Zehui; Tan Weihong; Moudgil, Brij M.; Mericle, Robert A.

    2006-01-01

    In this paper, we described a novel fluorescence lifetime-based approach to determine the core-shell nanostructure of FITC-(fluorescein isothiocyanate, isomer I) doped fluorescent silica nanoparticles (FSNPs). Because of phase homogeneity between the core and the shell, electron microscopic technique could not be used to characterize such core-shell nanostructure. Our optical approach not only revealed the core-shell nanostructure of FSNPs but also evaluated photobleaching of FSNPs both in the solvated and non-solvated (dry) states. The FSNPs were produced via Stoeber's method by hydrolysis and co-condensation reaction of tetraethylorthosilicate (TEOS) and fluorescein linked (3-aminopropyl)triethoxysilane (FITC-APTS conjugate) in the presence of ammonium hydroxide catalyst. To obtain a pure silica surface coating, FSNPs were then post-coated with TEOS. The average particle size was 135 nm as determined by TEM (transmission electron microscope) measurements. Fluorescence excitation and emission spectral data demonstrated successful doping of FITC dye molecules in FSNPs. Fluorescence lifetime data revealed that approximately 62% of dye molecules remained in the solvated silica shell, while 38% of dye molecules remained in the non-solvated (dry) silica core. Photobleaching experiments of FSNPs were conducted both in DI water (solution state) and in air (dry state). Severe photobleaching of FSNPs was observed in air. However, FSNPs were moderately photostable in the solution state. Photostability of FSNPs in both solution and dry states was explained on the basis of fluorescence lifetime data

  7. A two-step approach for the preliminary evaluation of the thermal-hydraulics and safety of the ELSY open square core design

    International Nuclear Information System (INIS)

    Meloni, Paride; Bandini, Giacomino; Polidori, Massimiliano; Cervone, Antonio; Manservisi, Sandro

    2009-01-01

    Several innovative solutions for a liquid metal fast reactor design have been investigated in the EURATOM Sixth Framework Programme and an open-assembly core design for the ELSY (European Lead-cooled System) reactor has been proposed by ENEA. The development of this new reactor, based on innovative neutronic and safety considerations, requires a new approach to the thermal-hydraulic (T/H) core design. In this paper a new two-step approach of the T/H analysis for this open-assembly core is presented and, in particular is used for the evaluation of the preliminary core design of a 1500 MW lead fast reactor with open square lattice and three fuel radial zones with different levels of enrichment. In the first step a preliminary thermal-hydraulic and safety evaluation of the core neutronic design is investigated by using a one-dimensional RELAP5 model for independent channel analysis. Then two and three-dimensional effects are taken into account by using a dedicated tool for the evaluation of assembly mixing effects. The RELAP5 model, based on pressure loss and heat transfer correlations available for heavy liquid metal flows in rod bundle, consists of completely independent assemblies and therefore it can be used for a conservative evaluation of the thermal-hydraulics of the core reactor. Due to the open-lattice configuration, the two and three-dimensional effects are important and they are taken into account by using a simplified three-dimensional numerical model of an open square lattice reactor core, developed with the purpose of analyzing the whole core behavior. The numerical simulation is performed at assembly length level taking into account the local fluctuations of turbulent viscosity and energy exchange coefficients at sub-channel level through transfer operators based on parametric coefficients. A preliminary evaluation of the mixing effects between assembly flows on the temperature field has been performed by using an average assembly turbulent viscosity

  8. systemic approach to teaching and learning chemistry

    African Journals Online (AJOL)

    unesco

    2National Core Group in Chemistry, H.E.J Research Institute of Chemistry,. University of ... innovative way of teaching and learning through systemic approach (SATL) has been .... available to do useful work in a thermodynamic process.

  9. Reliability of core test – Critical assessment and proposed new approach

    OpenAIRE

    Shafik Khoury; Ali Abdel-Hakam Aliabdo; Ahmed Ghazy

    2014-01-01

    Core test is commonly required in the area of concrete industry to evaluate the concrete strength and sometimes it becomes the unique tool for safety assessment of existing concrete structures. Core test is therefore introduced in most codes. An extensive literature survey on different international codes’ provisions; including the Egyptian, British, European and ACI Codes, for core analysis is presented. All studied codes’ provisions seem to be unreliable for predicting the in-situ concrete ...

  10. Al2O3 - TiO2-A simple sol-gel strategy to the synthesis of low temperature sintered alumina-aluminium titanate composites through a core-shell approach

    International Nuclear Information System (INIS)

    Jayasankar, M.; Ananthakumar, S.; Mukundan, P.; Wunderlich, W.; Warrier, K.G.K.

    2008-01-01

    A simple sol-gel based core-shell approach for the synthesis of alumina-aluminium titanate composite is reported. Alumina is the core and titania is the shell. The coating of titania has been performed in aqueous medium on alumina particle by means of heterocoagulation of titanyl chloride. Further heat treatment results in low temperature formation of aluminium titanate as well as low temperature sintering of alumina-aluminium titanate composites. The lowering of the reaction temperature can be attributed to the maximisation of the contact surface between the reactants due to the core-shell approach involving nanoparticles. The mechanism of formation of aluminium titanate and the observations on densification features in the present process are compared with that of mixture of oxides under identical conditions. The sintered alumina-aluminium titanate composite has an average grain size of 2 μm. - Graphical abstract: The article presents a simple sol-gel process through core-shell approach to the synthesis of low temperature sintered alumina-aluminium titanate. The lowering of the reaction temperature can be attributed to the maximisation of the contact surface between the reactant due to the core-shell approach. This material showed the better microstructure control compared to the standard solid-state mixing route

  11. Group I-like ribozymes with a novel core organization perform obligate sequential hydrolytic cleavages at two processing sites

    DEFF Research Database (Denmark)

    Einvik, C; Nielsen, Henrik; Westhof, E

    1998-01-01

    A new category of self-splicing group I introns with conserved structural organization and function is found among the eukaryotic microorganisms Didymium and Naegleria. These complex rDNA introns contain two distinct ribozymes with different functions: a regular group I splicing...... available GIR1 sequences and propose a common RNA secondary structure resembling that of group I splicing-ribozymes, but with some important differences. The GIR1s lack most peripheral sequence components, as well as a P1 segment, and, at approximately 160-190 nt, they are the smallest functional group I...... ribozymes known from nature. All GIR1s were found to contain a novel 6-bp pseudoknot (P15) within their catalytic core region. Experimental support of the proposed structure was obtained from the Didymium GIR1 by RNA structure probing and site-directed mutagenesis. Three-dimensional modeling indicates...

  12. Data Collection for Mobile Group Consumption: An Asynchronous Distributed Approach

    Directory of Open Access Journals (Sweden)

    Weiping Zhu

    2016-04-01

    Full Text Available Mobile group consumption refers to consumption by a group of people, such as a couple, a family, colleagues and friends, based on mobile communications. It differs from consumption only involving individuals, because of the complex relations among group members. Existing data collection systems for mobile group consumption are centralized, which has the disadvantages of being a performance bottleneck, having single-point failure and increasing business and security risks. Moreover, these data collection systems are based on a synchronized clock, which is often unrealistic because of hardware constraints, privacy concerns or synchronization cost. In this paper, we propose the first asynchronous distributed approach to collecting data generated by mobile group consumption. We formally built a system model thereof based on asynchronous distributed communication. We then designed a simulation system for the model for which we propose a three-layer solution framework. After that, we describe how to detect the causality relation of two/three gathering events that happened in the system based on the collected data. Various definitions of causality relations based on asynchronous distributed communication are supported. Extensive simulation results show that the proposed approach is effective for data collection relating to mobile group consumption.

  13. Data Collection for Mobile Group Consumption: An Asynchronous Distributed Approach.

    Science.gov (United States)

    Zhu, Weiping; Chen, Weiran; Hu, Zhejie; Li, Zuoyou; Liang, Yue; Chen, Jiaojiao

    2016-04-06

    Mobile group consumption refers to consumption by a group of people, such as a couple, a family, colleagues and friends, based on mobile communications. It differs from consumption only involving individuals, because of the complex relations among group members. Existing data collection systems for mobile group consumption are centralized, which has the disadvantages of being a performance bottleneck, having single-point failure and increasing business and security risks. Moreover, these data collection systems are based on a synchronized clock, which is often unrealistic because of hardware constraints, privacy concerns or synchronization cost. In this paper, we propose the first asynchronous distributed approach to collecting data generated by mobile group consumption. We formally built a system model thereof based on asynchronous distributed communication. We then designed a simulation system for the model for which we propose a three-layer solution framework. After that, we describe how to detect the causality relation of two/three gathering events that happened in the system based on the collected data. Various definitions of causality relations based on asynchronous distributed communication are supported. Extensive simulation results show that the proposed approach is effective for data collection relating to mobile group consumption.

  14. Introducing Farouk's Process Consultation Group Approach in Irish Primary Schools

    Science.gov (United States)

    Hayes, Marie; Stringer, Phil

    2016-01-01

    Research has shown that teacher consultation groups increase teachers' behaviour management skills through discussion and collaborative problem-solving. Unlike the United Kingdom, at the time of this research consultation groups were not widely used in Irish schools. This research introduced Farouk's process consultation approach in three Irish…

  15. Taking a Comprehensive Approach to Common Core Rollout

    Science.gov (United States)

    Illingworth, Amy

    2016-01-01

    One district, South Bay Union School District, devises and executes a comprehensive strategy that includes training for district staff, teachers and coaches, including using PLCs and professional development in the implementation of Common Core English language arts standards.

  16. Fracture resistance of upper central incisors restored with different posts and cores

    Directory of Open Access Journals (Sweden)

    Maryam Rezaei Dastjerdi

    2015-08-01

    Full Text Available Objectives To determine and compare the fracture resistance of endodontically treated maxillary central incisors restored with different posts and cores. Materials and Methods Forty-eight upper central incisors were randomly divided into four groups: cast post and core (group 1, fiber-reinforced composite (FRC post and composite core (group 2, composite post and core (group 3, and controls (group 4. Mesio-distal and bucco-lingual dimensions at 7 and 14 mm from the apex were compared to ensure standardization among the groups. Twelve teeth were prepared for crown restoration (group 4. Teeth in other groups were endodontically treated, decoronated at 14 mm from the apex, and prepared for posts and cores. Resin-based materials were used for cementation in groups 1 and 2. In group 3, composite was used directly to fill the post space and for core build-up. All samples were restored by standard metal crowns using glass ionomer cement, mounted at 135° vertical angle, subjected to thermomechanical aging, and then fractured using a universal testing machine. Kruskal-Wallis and Mann-Whitney U tests were used to analyze the data. Results Fracture resistance of the groups was as follows: Control (group 4 > cast post and core (group 1 > fiber post and composite core (group 2 > composite post and core (group 3. All samples in groups 2 and 3 fractured in restorable patterns, whereas most (58% in group 1 were non-restorable. Conclusions Within the limitations of this study, FRC posts showed acceptable fracture resistance with favorable fracture patterns for reconstruction of upper central incisors.

  17. Report on the combined meeting of the core confinement and internal transport barrier expert group, confinement database and modeling expert group and edge pedestal expert group, 12-16 April 1999, Garching

    International Nuclear Information System (INIS)

    Janeschitz, G.; Connor, J.W.; Cordey, G.; Kardaun, O.; Mukhovatov, V.; Stambaugh, R.; Ryter, F.; Wakatani, M.

    1999-01-01

    This contribution to the ITER EDA Newsletter reports on the combined meeting of the core confinement and internal transport barrier expert group, confinement database and modeling expert group and edge pedestal expert group in Garching, Germany. This is the first workshop of its kind after the re-organisation of the expert groups. The new scheme of the meetings, namely to permit more interaction between groups by arranging them at the same time and location turned out to be very successful. The main issues discussed were for the Confinement Database: merging of edge pedestal and confinement data, improvement of the density- and magnetic shape parameters, addition of new dedicated threshold data, the effect of different divertors in JET; for the H-Mode Power Threshold Database: assembly of a new version of the database with about 650 time points from 10 tokamaks; for the 1-D Modelling Workshop: management of the database after the re-organisation of the Joint Central Team an ongoing efforts in plasma transport modelling; for the newly formed pedestal group: issues of the H-mode shear layer at the plasma edge. There was also an executive summary given of a recent USA workshop on internal transport barriers and regimes with weak or negative magnetic shear

  18. Termination of light-water reactor core-melt accidents with a chemical core catcher: the core-melt source reduction system (COMSORS)

    International Nuclear Information System (INIS)

    Forsberg, C.W.; Parker, G.W.; Rudolph, J.C.; Osborne-Lee, I.W.; Kenton, M.A.

    1996-09-01

    The Core-Melt Source Reduction System (COMSORS) is a new approach to terminate light-water reactor core melt accidents and ensure containment integrity. A special dissolution glass is placed under the reactor vessel. If core debris is released onto the glass, the glass melts and the debris dissolves into the molten glass, thus creating a homogeneous molten glass. The molten glass, with dissolved core debris, spreads into a wide pool, distributing the heat for removal by radiation to the reactor cavity above or by transfer to water on top of the molten glass. Expected equilibrium glass temperatures are approximately 600 degrees C. The creation of a low-temperature, homogeneous molten glass with known geometry permits cooling of the glass without threatening containment integrity. This report describes the technology, initial experiments to measure key glass properties, and modeling of COMSORS operations

  19. Fast neutron reactor core research at the C.E.A

    International Nuclear Information System (INIS)

    Chaudat, J.-P.

    1978-05-01

    This report covers all physical studies of fast neutron reactors carried out by the C.E.A., to povide basic data (multi-group cross sections) and computer methods which may be used to calculate nuclear power plant neutron properties with the precision required by the project. The approach adopted to establish the basic data used in all core calculations is described in greated detail: choice of a reference procedure for basic mode calculations (CARNAVAL set), choice of particular experimental programs to reduce uncertainties in connection with the formula set, adjustement of cross sections on integral parameters measured on critical experiments. The development of the formula set is closely connected with the project requirements; hence the set is modified with respect to the core characteristics of the power plant studied. Following an explanation of how the CARNAVAL III and IV formula sets -used for PHENIX and SUPER-PHENIX respectively- were derived, current studies for heterogeneous cores are described [fr

  20. Core/shell-type nanorods of Tb{sup 3+}-doped LaPO{sub 4}, modified with amine groups, revealing reduced cytotoxicity

    Energy Technology Data Exchange (ETDEWEB)

    Runowski, Marcin [Adam Mickiewicz University, Department of Rare Earths, Faculty of Chemistry (Poland); Dąbrowska, Krystyna [Polish Academy of Sciences, Bacteriophage Laboratory, Institute of Immunology and Experimental Therapy (Poland); Grzyb, Tomasz [Adam Mickiewicz University, Department of Rare Earths, Faculty of Chemistry (Poland); Miernikiewicz, Paulina [Polish Academy of Sciences, Bacteriophage Laboratory, Institute of Immunology and Experimental Therapy (Poland); Lis, Stefan, E-mail: blis@amu.edu.pl [Adam Mickiewicz University, Department of Rare Earths, Faculty of Chemistry (Poland)

    2013-11-15

    A simple co-precipitation reaction between Ln{sup 3+} cations (Ln = lanthanide) and phosphate ions in the presence of polyethylene glycol (PEG), including post-treatment under hydrothermal conditions, leads to the formation of Tb{sup 3+}-doped LaPO{sub 4} crystalline nanorods. The nanoparticles obtained can be successfully coated with amorphous and porous silica, forming core/shell-type nanorods. Both products reveal intensive green luminescence under UV lamp irradiation. The surface of the core/shell-type product can also be modified with –NH{sub 2} groups via silylation procedure, using 3-aminopropyltriethoxysilane as a modifier. Powder X-ray diffraction, transmission electron microscopy, and scanning electron microscopy confirm the desired structure and needle-like shape of the products synthesized. Fourier transform infrared spectroscopy and specific surface area measurements by Brunauer–Emmett–Teller method reveal a successful surface modification with amine groups of the core/shell-type nanoparticles prepared. The nanomaterials synthesized exhibit green luminescence characteristic of Tb{sup 3+} ions, as solid powders and aqueous colloids, examined by spectrofluorometry. The in vitro cytotoxicity studies reveal different degree toxicity of the products. LaPO{sub 4}:Tb{sup 3+}@SiO{sub 2}@NH{sub 2} exhibits the smallest toxicity against B16F0 mouse melanoma cancer cells and human skin microvascular endothelial cell lines, in contrast to the most toxic LaPO{sub 4}:Tb{sup 3+}@SiO{sub 2}.Graphical Abstract.

  1. Fused-core particle technology in high-performance liquid chromatography: An overview

    Directory of Open Access Journals (Sweden)

    Joseph J. Kirkland

    2013-10-01

    Full Text Available The advent of superficially porous particles (SPPs for packed HPLC columns has changed the way that many practitioners have approached the problem of developing needed separations. The very high efficiency of such columns, combined with convenient operating conditions, modest back pressures and the ability to use conventional HPLC instruments has resulted in intense basic studies of SPP technology, and widespread applications in many sciences. This report contains an overview of the SPP technology first developed in 2006 by Advanced Materials Technology, Inc., for sub-3-μm particles, then expanded into a family of SPP products with different particle sizes, pore sizes and other physical parameters. This approach was designed so that each particle of the family could be optimized for separating a particular group of compounds, usually based on solute size. Keywords: Superficially porous particles, Fused-core particles, Core–shell particles, Peptides, Proteins, Drug separations

  2. Core Outcome Set-STAndards for Development: The COS-STAD recommendations.

    Directory of Open Access Journals (Sweden)

    Jamie J Kirkham

    2017-11-01

    Full Text Available The use of core outcome sets (COS ensures that researchers measure and report those outcomes that are most likely to be relevant to users of their research. Several hundred COS projects have been systematically identified to date, but there has been no formal quality assessment of these studies. The Core Outcome Set-STAndards for Development (COS-STAD project aimed to identify minimum standards for the design of a COS study agreed upon by an international group, while other specific guidance exists for the final reporting of COS development studies (Core Outcome Set-STAndards for Reporting [COS-STAR].An international group of experienced COS developers, methodologists, journal editors, potential users of COS (clinical trialists, systematic reviewers, and clinical guideline developers, and patient representatives produced the COS-STAD recommendations to help improve the quality of COS development and support the assessment of whether a COS had been developed using a reasonable approach. An open survey of experts generated an initial list of items, which was refined by a 2-round Delphi survey involving nearly 250 participants representing key stakeholder groups. Participants assigned importance ratings for each item using a 1-9 scale. Consensus that an item should be included in the set of minimum standards was defined as at least 70% of the voting participants from each stakeholder group providing a score between 7 and 9. The Delphi survey was followed by a consensus discussion with the study management group representing multiple stakeholder groups. COS-STAD contains 11 minimum standards that are the minimum design recommendations for all COS development projects. The recommendations focus on 3 key domains: the scope, the stakeholders, and the consensus process.The COS-STAD project has established 11 minimum standards to be followed by COS developers when planning their projects and by users when deciding whether a COS has been developed using

  3. Core Outcome Set-STAndards for Development: The COS-STAD recommendations.

    Science.gov (United States)

    Kirkham, Jamie J; Davis, Katherine; Altman, Douglas G; Blazeby, Jane M; Clarke, Mike; Tunis, Sean; Williamson, Paula R

    2017-11-01

    The use of core outcome sets (COS) ensures that researchers measure and report those outcomes that are most likely to be relevant to users of their research. Several hundred COS projects have been systematically identified to date, but there has been no formal quality assessment of these studies. The Core Outcome Set-STAndards for Development (COS-STAD) project aimed to identify minimum standards for the design of a COS study agreed upon by an international group, while other specific guidance exists for the final reporting of COS development studies (Core Outcome Set-STAndards for Reporting [COS-STAR]). An international group of experienced COS developers, methodologists, journal editors, potential users of COS (clinical trialists, systematic reviewers, and clinical guideline developers), and patient representatives produced the COS-STAD recommendations to help improve the quality of COS development and support the assessment of whether a COS had been developed using a reasonable approach. An open survey of experts generated an initial list of items, which was refined by a 2-round Delphi survey involving nearly 250 participants representing key stakeholder groups. Participants assigned importance ratings for each item using a 1-9 scale. Consensus that an item should be included in the set of minimum standards was defined as at least 70% of the voting participants from each stakeholder group providing a score between 7 and 9. The Delphi survey was followed by a consensus discussion with the study management group representing multiple stakeholder groups. COS-STAD contains 11 minimum standards that are the minimum design recommendations for all COS development projects. The recommendations focus on 3 key domains: the scope, the stakeholders, and the consensus process. The COS-STAD project has established 11 minimum standards to be followed by COS developers when planning their projects and by users when deciding whether a COS has been developed using reasonable

  4. Vibrational spectra study of fluorescent dendrimers built from the cyclotriphosphazene core with terminal dansyl and carbamate groups

    Science.gov (United States)

    Furer, V. L.; Vandyukova, I. I.; Vandyukov, A. E.; Fuchs, S.; Majoral, J. P.; Caminade, A. M.; Kovalenko, V. I.

    2011-08-01

    The FTIR and FT Raman spectra of the "Janus"-type dendrimers, possessing five carbamate groups on one side and five fluorescent dansyl derivatives on the other side, with amide G1 and hydrazone G2 central linkages were studied. These surface-block dendrimers are obtained by the coupling of two different dendrons. The FTIR and FT-Raman spectra of the zero generation dendrons, built from the hexafunctional cyclotriphosphazene core, with five dansyl terminal groups and one carbamate G0 v and one oxybenzaldehyde function G0v have been recorded. The structural optimization and normal mode analysis were performed for dendron G0v on the basis of the density functional theory (DFT). The calculated geometrical parameters and harmonic vibrational frequencies are predicted in a good agreement with the experimental data. It was found that dendron molecule G0v has a concave lens structure with planar -O-C6H4-CHdbnd O fragments and slightly non-planar cyclotriphosphazene core. The experimental IR and Raman spectra of dendron G0v were interpreted by means of potential energy distributions. Relying on DFT calculations a complete vibrational assignment is proposed. The strong band 1597 cm -1 show marked changes of the optical density in dependence of substituents in the aromatic ring. The frequencies of ν(N-H) bands in the IR spectra reveal the presence of the different types of H-bonds in the dendrimers.

  5. The Einsteinian T(3)-gauge approach and the stress tensor of the screw dislocation in the second order: avoiding the cut-off at the core

    International Nuclear Information System (INIS)

    Malyshev, C

    2007-01-01

    A translational gauge approach of the Einstein type is proposed for obtaining the stresses that are due to non-singular screw dislocation. The stress distribution of the second order around the screw dislocation is classically known for the hollow circular cylinder with traction-free external and internal boundaries. The inner boundary surrounds the dislocation's core, which is not captured by the conventional solution. The present gauge approach enables us to continue the classically known quadratic stresses inside the core. The gauge equation is chosen in the Hilbert-Einstein form, and it plays the role of non-conventional incompatibility law. The stress function method is used, and it leads to the modified stress potential given by two constituents: the conventional one, say, the 'background' and a short-ranged gauge contribution. The latter just causes additional stresses, which are localized. The asymptotic properties of the resulting stresses are studied. Since the gauge contributions are short-ranged, the background stress field dominates sufficiently far from the core. The outer cylinder's boundary is traction-free. At sufficiently moderate distances, the second-order stresses acquire regular continuation within the core region, and the cut-off at the core does not occur. Expressions for the asymptotically far stresses provide self-consistently new length scales dependent on the elastic parameters. These lengths could characterize an exteriority of the dislocation core region

  6. Comparative regulatory approaches for groups of new plant breeding techniques.

    Science.gov (United States)

    Lusser, Maria; Davies, Howard V

    2013-06-25

    This manuscript provides insights into ongoing debates on the regulatory issues surrounding groups of biotechnology-driven 'New Plant Breeding Techniques' (NPBTs). It presents the outcomes of preliminary discussions and in some cases the initial decisions taken by regulators in the following countries: Argentina, Australia, Canada, EU, Japan, South Africa and USA. In the light of these discussions we suggest in this manuscript a structured approach to make the evaluation more consistent and efficient. The issue appears to be complex as these groups of new technologies vary widely in both the technologies deployed and their impact on heritable changes in the plant genome. An added complication is that the legislation, definitions and regulatory approaches for biotechnology-derived crops differ significantly between these countries. There are therefore concerns that this situation will lead to non-harmonised regulatory approaches and asynchronous development and marketing of such crops resulting in trade disruptions. Copyright © 2013 Elsevier B.V. All rights reserved.

  7. Group problem solving as a different participatory approach to Citizenship Education.

    NARCIS (Netherlands)

    Guérin, Laurence

    2017-01-01

    Purpose: The main goal of this article is to define and justify group problem solving as an approach to citizenship education. It is demonstrated that the choice of theoretical framework of democracy has consequences for the chosen learning goals, educational approach and learning activities. The

  8. A Core Set Based Large Vector-Angular Region and Margin Approach for Novelty Detection

    Directory of Open Access Journals (Sweden)

    Jiusheng Chen

    2016-01-01

    Full Text Available A large vector-angular region and margin (LARM approach is presented for novelty detection based on imbalanced data. The key idea is to construct the largest vector-angular region in the feature space to separate normal training patterns; meanwhile, maximize the vector-angular margin between the surface of this optimal vector-angular region and abnormal training patterns. In order to improve the generalization performance of LARM, the vector-angular distribution is optimized by maximizing the vector-angular mean and minimizing the vector-angular variance, which separates the normal and abnormal examples well. However, the inherent computation of quadratic programming (QP solver takes O(n3 training time and at least O(n2 space, which might be computational prohibitive for large scale problems. By (1+ε  and  (1-ε-approximation algorithm, the core set based LARM algorithm is proposed for fast training LARM problem. Experimental results based on imbalanced datasets have validated the favorable efficiency of the proposed approach in novelty detection.

  9. TWO-DIMENSIONAL CORE-COLLAPSE SUPERNOVA MODELS WITH MULTI-DIMENSIONAL TRANSPORT

    International Nuclear Information System (INIS)

    Dolence, Joshua C.; Burrows, Adam; Zhang, Weiqun

    2015-01-01

    We present new two-dimensional (2D) axisymmetric neutrino radiation/hydrodynamic models of core-collapse supernova (CCSN) cores. We use the CASTRO code, which incorporates truly multi-dimensional, multi-group, flux-limited diffusion (MGFLD) neutrino transport, including all relevant O(v/c) terms. Our main motivation for carrying out this study is to compare with recent 2D models produced by other groups who have obtained explosions for some progenitor stars and with recent 2D VULCAN results that did not incorporate O(v/c) terms. We follow the evolution of 12, 15, 20, and 25 solar-mass progenitors to approximately 600 ms after bounce and do not obtain an explosion in any of these models. Though the reason for the qualitative disagreement among the groups engaged in CCSN modeling remains unclear, we speculate that the simplifying ''ray-by-ray'' approach employed by all other groups may be compromising their results. We show that ''ray-by-ray'' calculations greatly exaggerate the angular and temporal variations of the neutrino fluxes, which we argue are better captured by our multi-dimensional MGFLD approach. On the other hand, our 2D models also make approximations, making it difficult to draw definitive conclusions concerning the root of the differences between groups. We discuss some of the diagnostics often employed in the analyses of CCSN simulations and highlight the intimate relationship between the various explosion conditions that have been proposed. Finally, we explore the ingredients that may be missing in current calculations that may be important in reproducing the properties of the average CCSNe, should the delayed neutrino-heating mechanism be the correct mechanism of explosion

  10. Assessment of assembly homogenized two-steps core dynamic calculations using direct whole core transport solutions

    International Nuclear Information System (INIS)

    Hursin, Mathieu; Downar, Thomas J.; Yoon, Joo Il; Joo, Han Gyu

    2016-01-01

    Highlights: • Reactivity initiated accident analysis with direct whole core transient transport code. • Comparison with usual “two steps” procedure. • Effect of effective delayed neutron fraction definition on energy deposition in the fuel. • Effect of homogenized few-group cross sections generation at the assembly level on energy deposition in the fuel. • Effect of effective fuel temperature definition on energy deposition in the fuel. - Abstract: The impact of the approximations in the “two-steps” procedure used in the current generation of nodal simulators for core transient calculations is assessed by using a higher order solution obtained from a direct, whole core, transient transport calculation. A control rod ejection accident in an idealized minicore is analyzed with PARCS, which uses the two-steps procedure and DeCART which provides the higher order solution. DeCART is used as lattice code to provide the homogenized cross sections and kinetics parameters to PARCS. The approximations made by using (1) the homogenized few-group cross sections and kinetic parameters generated at the assembly level, (2) an effective delayed neutrons fraction, (3) an effective fuel temperature and (4) the few-group formulation are investigated in terms of global and local core power behavior. The results presented in the paper show that the current two-steps procedure produces sufficiently accurate transient results with respect to the direct whole core calculation solution, provided that its parameters are carefully generated using the prescriptions described in the present article.

  11. Group Approach to the Quantization of Non-Abelian Stueckelberg Models

    International Nuclear Information System (INIS)

    Aldaya, V; Lopez-Ruiz, F F; Calixto, M

    2011-01-01

    The quantum field theory of Non-Linear Sigma Models on coadjoint orbits of a semi-simple group G are formulated in the framework of a Group Approach to Quantization. In this scheme, partial-trace Lagrangians are recovered from two-cocycles defined on the infinite-dimensional group of sections of the jet-gauge group J 1 (G). This construction is extended to the entire physical system coupled to Yang-Mills fields, thus constituting an algebraic formulation of the Non-Abelian Stueckelgerg formalism devoid of the unitarity/renormalizability obstruction that this theory finds in the standard Lagrangian formalism under canonical quantization.

  12. Group Approach to the Quantization of Non-Abelian Stueckelberg Models

    Energy Technology Data Exchange (ETDEWEB)

    Aldaya, V; Lopez-Ruiz, F F [Instituto de Astrofisica de AndalucIa (IAA-CSIC), Apartado Postal 3004, 18080 Granada (Spain); Calixto, M, E-mail: valdaya@iaa.es, E-mail: Manuel.Calixto@upct.es, E-mail: flopez@iaa.es [Departamento de Matematica Aplicada y Estadistica, Universidad Politecnica de Cartagena, Paseo Alfonso XIII 56, 30203 Cartagena (Spain)

    2011-03-01

    The quantum field theory of Non-Linear Sigma Models on coadjoint orbits of a semi-simple group G are formulated in the framework of a Group Approach to Quantization. In this scheme, partial-trace Lagrangians are recovered from two-cocycles defined on the infinite-dimensional group of sections of the jet-gauge group J{sup 1} (G). This construction is extended to the entire physical system coupled to Yang-Mills fields, thus constituting an algebraic formulation of the Non-Abelian Stueckelgerg formalism devoid of the unitarity/renormalizability obstruction that this theory finds in the standard Lagrangian formalism under canonical quantization.

  13. Thermal-hydraulic modeling of nanofluids as the coolant in VVER-1000 reactor core by the porous media approach

    International Nuclear Information System (INIS)

    Jahanfarnia, G.; Zarifi, E.; Veysi, F.

    2013-01-01

    The aim of this study was to perform a thermal-hydraulic analysis of nanofluids as coolant in the Bushehr VVER-1000 reactor core using the porous media approach. Water-based nanofluids containing various volume fractions of Al 2 O 3 and TiO 2 nanoparticles were analyzed. The conservation equations were discretized by the finite volume method and solved by numerical methods. To validate the approaches applied in this study, the results of the model and COBRA-EN code were compared for pure water. The achieved results show that the temperature of the coolant increases with the concentration of the nanoparticles. (authors)

  14. Group Evidential Reasoning Approach for MADA under Fuzziness and Uncertainties

    Directory of Open Access Journals (Sweden)

    Mi Zhou

    2013-05-01

    Full Text Available Multiple attribute decision analysis (MADA problems often include both qualitative and quantitative attributes which may be either precise or inaccurate. The evidential reasoning (ER approach is one of reliable and rational methods for dealing with MADA problems and can generate aggregated assessments from a variety of attributes. In many real world decision situations, accurate assessments are difficult to provide such as in group decision situations. Extensive research in dealing with imprecise or uncertain belief structures has been conducted on the basis of the ER approach, such as interval belief degrees, interval weights and interval uncertainty. In this paper, the weights of attributes and utilities of evaluation grades are considered to be fuzzy numbers for the ER approach. Fuzzy analytic hierarchy process (FAHP is used for generating triangular fuzzy weights for attributes from a triangular fuzzy judgment matrix provided by an expert. The weighted arithmetic mean method is proposed to aggregate the triangular fuzzy weights of attributes from a group of experts. -cut is then used to transform the combined triangular fuzzy weights to interval weights for the purpose of dealing with the fuzzy type of weight and utility in a consistent way. Several pairs of group evidential reasoning based nonlinear programming models are then designed to calculate the global fuzzy belief degrees and the overall expected interval utilities of each alternative with interval weights and interval utilities as constraints. A case study is conducted to show the validity and effectiveness of the proposed approach and sensitivity analysis is also conducted on interval weights generated by different -cuts.

  15. Evaluation of a Core Team Centred Professional Development Programme for Building a Whole-School Cooperative Problem Solving Approach to Conflict

    Science.gov (United States)

    White, Andrew Jonathan; Wertheim, Eleanor H.; Freeman, Elizabeth; Trinder, Margot

    2013-01-01

    This study evaluated a professional learning approach using a core team (CT) model to assist primary (elementary) schools to develop whole-school collaborative conflict resolution processes. Thirteen schools were matched and randomly assigned to the enhancing relationships in school communities programme ("n"?=?10) or a non-programme…

  16. Evaluating Community Health Advisor (CHA) Core Competencies: The CHA Core Competency Retrospective Pretest/Posttest (CCCRP).

    Science.gov (United States)

    Story, Lachel; To, Yen M

    2016-05-01

    Health care and academic systems are increasingly collaborating with community health advisors (CHAs) to provide culturally relevant health interventions that promote sustained community transformation. Little attention has been placed on CHA training evaluation, including core competency attainment. This study identified common CHA core competencies, generated a theoretically based measure of those competencies, and explored psychometric properties of that measure. A concept synthesis revealed five CHA core competencies (leadership, translation, guidance, advocacy, and caring). The CHA Core Competency Retrospective Pretest/Posttest (CCCRP) resulted from that synthesis, which was administered using multiple approaches to individuals who previously received CHA training (N= 142). Exploratory factor analyses revealed a two-factor structure underlying the posttraining data, and Cronbach's alpha indicated high internal consistency. This study suggested some CHA core competencies might be more interrelated than previously thought, and two major competencies exist rather than five and supported the CCCRP's use to evaluate core competency attainment resulting from training. © The Author(s) 2014.

  17. Low void effect (CFV) core concept flexibility: from self-breeder to burner core - 15091

    International Nuclear Information System (INIS)

    Buiron, L.; Dujcikova, L.

    2015-01-01

    In the frame of the French strategy on sustainable nuclear energy, several scenarios consider fuel cycle transition toward a plutonium multi-recycling strategy in sodium cooled fast reactor (SFR). Basically, most of these scenarios consider the deployment of a 60 GWe SFR fleet in 2 steps to renew the French PWR fleet. As scenarios do investigate long term deployment configurations, some of them require tools for nuclear phase-out studies. Instead of designing new reactors, the adopted strategy does focus on adaptation of existing ones into burner configurations. This is what was done in the frame of the EFR project at the end of the 90's using the CAPRA approach (French acronym for Enhance Plutonium Consumption in Fast Reactor). The EFR burner configuration was obtained by inserting neutronic penalties inside the core (absorber material and/or diluent subassembly). Starting from the preliminary industrial image of a SFR 3600 MWth core based on Low Sodium Void concept (CFV in French), a 'CAPRA-like' approach has been studied. As the CFV self-breeding is ensured by fertile blankets, a first modification consisted in the substitution of the corresponding depleted uranium by 'inert' or absorber material leading to a 'natural burner' core with only small impacts on flux distribution. The next step forward CAPRA configuration was the substitution of 1/3 of the fuel pins by 'dummy' pins (MgO pellets). The small spectrum shift due to MgO material insertion leads to an increase Doppler constant which exceeds the value of the reference case. As the core sodium void worth value is conserved, the CFV CAPRA core 'safety' potential is quite similar to the one of the reference core. Fuel thermo-mechanical requirements are met by both nominal core power and fuel time residence reduction. However, these reduction factors are lower than those obtained for EFR core. The management of the enhanced reactivity swing is discussed

  18. Simplified P_n transport core calculations in the Apollo3 system

    International Nuclear Information System (INIS)

    Baudron, Anne-Marie; Lautard, Jean-Jacques

    2011-01-01

    This paper describes the development of two different neutronics core solvers based on the Simplified P_N transport (SP_N) approximation developed in the context of a new generation nuclear reactor computational system, APOLLO3. Two different approaches have been used. The first one solves the standard SPN system. In the second approach, the SP_N equations are solved as diffusion equations by treating the SP_N flux harmonics like pseudo energy groups, obtained by a change of variable. These two methods have been implemented for Cartesian and hexagonal geometries in the kinetics solver MINOS. The numerical approximation is based on the mixed dual finite formulation and the discretization uses the Raviart-Thomas-Nedelec finite elements. For the unstructured geometries, the SP_N equations are treated by the SN transport solver MINARET by considering the second SP_N approach. The MINARET solver is based on discontinuous Galerkin finite element approximation on cylindrical unstructured meshes composed of a set of conforming triangles for the radial direction. Numerical applications are presented for both solvers in different core configurations (the Jules Horowitz research reactor (JHR) and the Generation IV fast reactor project ESFR). (author)

  19. Data Collection for Mobile Group Consumption: An Asynchronous Distributed Approach

    Science.gov (United States)

    Zhu, Weiping; Chen, Weiran; Hu, Zhejie; Li, Zuoyou; Liang, Yue; Chen, Jiaojiao

    2016-01-01

    Mobile group consumption refers to consumption by a group of people, such as a couple, a family, colleagues and friends, based on mobile communications. It differs from consumption only involving individuals, because of the complex relations among group members. Existing data collection systems for mobile group consumption are centralized, which has the disadvantages of being a performance bottleneck, having single-point failure and increasing business and security risks. Moreover, these data collection systems are based on a synchronized clock, which is often unrealistic because of hardware constraints, privacy concerns or synchronization cost. In this paper, we propose the first asynchronous distributed approach to collecting data generated by mobile group consumption. We formally built a system model thereof based on asynchronous distributed communication. We then designed a simulation system for the model for which we propose a three-layer solution framework. After that, we describe how to detect the causality relation of two/three gathering events that happened in the system based on the collected data. Various definitions of causality relations based on asynchronous distributed communication are supported. Extensive simulation results show that the proposed approach is effective for data collection relating to mobile group consumption. PMID:27058544

  20. Funding intensive care - approaches in systems using diagnosis-related groups.

    OpenAIRE

    Ettelt, S; Nolte, E

    2010-01-01

    This report reviews approaches to funding intensive care in health systems that use activitybased payment mechanisms based on diagnosis-related groups (DRGs) to reimburse hospital care. The report aims to inform the current debate about options for funding intensive care services for adults, children and newborns in England. Funding mechanisms reviewed here include those in Australia (Victoria), Denmark, France, Germany, Italy, Spain, Sweden and the United States (Medicare). Approaches to org...

  1. A facile approach for cupric ion detection in aqueous media using polyethyleneimine/PMMA core-shell fluorescent nanoparticles

    International Nuclear Information System (INIS)

    Chen Jian; Zeng Fang; Wu Shuizhu; Su Junhua; Zhao Jianqing; Tong Zhen

    2009-01-01

    A facile approach was developed to produce a dye-doped core-shell nanoparticle chemosensor for detecting Cu 2+ in aqueous media. The core-shell nanoparticle sensor was prepared by a one-step emulsifier-free polymerization, followed by the doping of the fluorescent dye Nile red (9-diethylamino- 5H-benzo[alpha] phenoxazine-5-one, NR) into the particles. For the nanoparticles, the hydrophilic polyethyleneimine (PEI) chain segments serve as the shell and the hydrophobic polymethyl methacrylate (PMMA) constitutes the core of the nanoparticles. The non-toxic and biocompatible PEI chain segments on the nanoparticle surface exhibit a high affinity for Cu 2+ ions in aqueous media, and the quenching of the NR fluorescence is observed upon binding of Cu 2+ ions. This makes the core-shell nanoparticle system a water-dispersible chemosensor for Cu 2+ ion detection. The quenching of fluorescence arises through intraparticle energy transfer (FRET) from the dye in the hydrophobic PMMA core to the Cu 2+ /PEI complexes on the nanoparticle surface. The energy transfer efficiency for PEI/PMMA particles with different diameters was determined, and it is found that the smaller nanoparticle sample exhibits higher quenching efficiency, and the limit for Cu 2+ detection is 1 μM for a nanoparticle sample with a diameter of ∼30 nm. The response of the fluorescent nanoparticle towards different metal ions was investigated and the nanoparticle chemosensor displays high selectivity and antidisturbance for the Cu 2+ ion among the metal ions examined (Na + , K + , Mg 2+ , Ca 2+ , Zn 2+ , Hg 2+ , Mn 2+ , Fe 2+ , Ni 2+ , Co 2+ and Pb 2+ ). This emulsifier-free, biocompatible and sensitive fluorescent nanoparticle sensor may find applications in cupric ion detection in the biological and environmental areas.

  2. A facile approach for cupric ion detection in aqueous media using polyethyleneimine/PMMA core-shell fluorescent nanoparticles.

    Science.gov (United States)

    Chen, Jian; Zeng, Fang; Wu, Shuizhu; Su, Junhua; Zhao, Jianqing; Tong, Zhen

    2009-09-09

    A facile approach was developed to produce a dye-doped core-shell nanoparticle chemosensor for detecting Cu(2+) in aqueous media. The core-shell nanoparticle sensor was prepared by a one-step emulsifier-free polymerization, followed by the doping of the fluorescent dye Nile red (9-diethylamino- 5H-benzo[alpha] phenoxazine-5-one, NR) into the particles. For the nanoparticles, the hydrophilic polyethyleneimine (PEI) chain segments serve as the shell and the hydrophobic polymethyl methacrylate (PMMA) constitutes the core of the nanoparticles. The non-toxic and biocompatible PEI chain segments on the nanoparticle surface exhibit a high affinity for Cu(2+) ions in aqueous media, and the quenching of the NR fluorescence is observed upon binding of Cu(2+) ions. This makes the core-shell nanoparticle system a water-dispersible chemosensor for Cu(2+) ion detection. The quenching of fluorescence arises through intraparticle energy transfer (FRET) from the dye in the hydrophobic PMMA core to the Cu(2+)/PEI complexes on the nanoparticle surface. The energy transfer efficiency for PEI/PMMA particles with different diameters was determined, and it is found that the smaller nanoparticle sample exhibits higher quenching efficiency, and the limit for Cu(2+) detection is 1 microM for a nanoparticle sample with a diameter of approximately 30 nm. The response of the fluorescent nanoparticle towards different metal ions was investigated and the nanoparticle chemosensor displays high selectivity and antidisturbance for the Cu(2+) ion among the metal ions examined (Na(+), K(+), Mg(2+), Ca(2+), Zn(2+), Hg(2+), Mn(2+), Fe(2+), Ni(2+), Co(2+) and Pb(2+)). This emulsifier-free, biocompatible and sensitive fluorescent nanoparticle sensor may find applications in cupric ion detection in the biological and environmental areas.

  3. A facile approach for cupric ion detection in aqueous media using polyethyleneimine/PMMA core-shell fluorescent nanoparticles

    Science.gov (United States)

    Chen, Jian; Zeng, Fang; Wu, Shuizhu; Su, Junhua; Zhao, Jianqing; Tong, Zhen

    2009-09-01

    A facile approach was developed to produce a dye-doped core-shell nanoparticle chemosensor for detecting Cu2+ in aqueous media. The core-shell nanoparticle sensor was prepared by a one-step emulsifier-free polymerization, followed by the doping of the fluorescent dye Nile red (9-diethylamino- 5H-benzo[alpha] phenoxazine-5-one, NR) into the particles. For the nanoparticles, the hydrophilic polyethyleneimine (PEI) chain segments serve as the shell and the hydrophobic polymethyl methacrylate (PMMA) constitutes the core of the nanoparticles. The non-toxic and biocompatible PEI chain segments on the nanoparticle surface exhibit a high affinity for Cu2+ ions in aqueous media, and the quenching of the NR fluorescence is observed upon binding of Cu2+ ions. This makes the core-shell nanoparticle system a water-dispersible chemosensor for Cu2+ ion detection. The quenching of fluorescence arises through intraparticle energy transfer (FRET) from the dye in the hydrophobic PMMA core to the Cu2+/PEI complexes on the nanoparticle surface. The energy transfer efficiency for PEI/PMMA particles with different diameters was determined, and it is found that the smaller nanoparticle sample exhibits higher quenching efficiency, and the limit for Cu2+ detection is 1 µM for a nanoparticle sample with a diameter of ~30 nm. The response of the fluorescent nanoparticle towards different metal ions was investigated and the nanoparticle chemosensor displays high selectivity and antidisturbance for the Cu2+ ion among the metal ions examined (Na+, K+, Mg2+, Ca2+, Zn2+, Hg2+, Mn2+, Fe2+, Ni2+, Co2+ and Pb2+). This emulsifier-free, biocompatible and sensitive fluorescent nanoparticle sensor may find applications in cupric ion detection in the biological and environmental areas.

  4. Earth's core convection: Boussinesq approximation or incompressible approach?

    Czech Academy of Sciences Publication Activity Database

    Anufriev, A. P.; Hejda, Pavel

    2010-01-01

    Roč. 104, č. 1 (2010), s. 65-83 ISSN 0309-1929 R&D Projects: GA AV ČR IAA300120704 Grant - others:INTAS(XE) 03-51-5807 Institutional research plan: CEZ:AV0Z30120515 Keywords : geodynamic models * core convection * Boussinesq approximation Subject RIV: DE - Earth Magnetism, Geodesy, Geography Impact factor: 0.831, year: 2010

  5. Fuzzy Group Decision Making Approach for Ranking Work Stations Based on Physical Pressure

    Directory of Open Access Journals (Sweden)

    Hamed Salmanzadeh

    2014-06-01

    Full Text Available This paper proposes a Fuzzy Group Decision Making approach for ranking work stations based on physical pressure. Fuzzy group decision making approach allows experts to evaluate different ergonomic factors using linguistic terms such as very high, high, medium, low, very low, rather than precise numerical values. In this way, there is no need to measure parameters and evaluation can be easily made in a group. According to ergonomics much work contents and situations, accompanied with multiple parameters and uncertainties, fuzzy group decision making is the best way to evaluate such a chameleon of concept. A case study was down to utilize the approach and illustrate its application in ergonomic assessment and ranking the work stations based on work pressure and found that this approach provides flexibility, practicality, efficiency in making decision around ergonomics areas. The normalized defuzzification numbers which are resulted from this method are compared with result of quantitative assessment of Automotive Assembly Work Sheet auto, it’s demonstrated that the proposed method result is 10% less than Automotive Assembly Work Sheet, approximately.

  6. Investigating the impact of uneven magnetic flux density distribution on core loss estimation

    DEFF Research Database (Denmark)

    Niroumand, Farideh Javidi; Nymand, Morten; Wang, Yiren

    2017-01-01

    is calculated according to an effective flux density value and the macroscopic dimensions of the cores. However, the flux distribution in the core can alter by core shapes and/or operating conditions due to nonlinear material properties. This paper studies the element-wise estimation of the loss in magnetic......There are several approaches for loss estimation in magnetic cores, and all these approaches highly rely on accurate information about flux density distribution in the cores. It is often assumed that the magnetic flux density evenly distributes throughout the core and the overall core loss...

  7. Tobacco Cessation for Adolescents: Developing a Group Therapy Approach.

    Science.gov (United States)

    Moolchan, Eric T.; Ruckel, Susan J.

    2002-01-01

    Describes a cognitive-behavioral therapeutic approach to help teenagers better manage life stressors by using effective and adaptive coping skills, while identifying and addressing specific factors that lead either to smoking or maintaining abstinence from smoking behavior. Discusses specific group exercises that empower teens to take control of…

  8. The verification of PWR-fuel code for PWR in-core fuel management

    International Nuclear Information System (INIS)

    Surian Pinem; Tagor M Sembiring; Tukiran

    2015-01-01

    In-core fuel management for PWR is not easy because of the number of fuel assemblies in the core as much as 192 assemblies so many possibilities for placement of the fuel in the core. Configuration of fuel assemblies in the core must be precise and accurate so that the reactor operates safely and economically. It is necessary for verification of PWR-FUEL code that will be used in-core fuel management for PWR. PWR-FUEL code based on neutron transport theory and solved with the approach of multi-dimensional nodal diffusion method many groups and diffusion finite difference method (FDM). The goal is to check whether the program works fine, especially for the design and in-core fuel management for PWR. Verification is done with equilibrium core search model at three conditions that boron free, 1000 ppm boron concentration and critical boron concentration. The result of the average burn up fuel assemblies distribution and power distribution at BOC and EOC showed a consistent trend where the fuel with high power at BOC will produce a high burn up in the EOC. On the core without boron is obtained a high multiplication factor because absence of boron in the core and the effect of fission products on the core around 3.8 %. Reactivity effect at 1000 ppm boron solution of BOC and EOC is 6.44 % and 1.703 % respectively. Distribution neutron flux and power density using NODAL and FDM methods have the same result. The results show that the verification PWR-FUEL code work properly, especially for core design and in-core fuel management for PWR. (author)

  9. Korrelasjon mellom core styrke, core stabilitet og utholdende styrke i core

    OpenAIRE

    Berg-Olsen, Andrea Marie; Fugelsøy, Eivor; Maurstad, Ann-Louise

    2010-01-01

    Formålet med studien var å se hvilke korrelasjon det er mellom core styrke, core stabilitet og utholdende styrke i core. Testingen bestod av tre hoveddeler hvor vi testet core styrke, core stabilitet og utholdende styrke i core. Innenfor core styrke og utholdende styrke i core ble tre ulike tester utført. Ved måling av core stabilitet ble det gjennomført kun en test. I core styrke ble isometrisk abdominal fleksjon, isometrisk rygg ekstensjon og isometrisk lateral fleksjon testet. Sit-ups p...

  10. Dehydration of core/shell fruits

    OpenAIRE

    Liu, Y.; Yang, Xiaosong; Cao, Y.; Wang, Z.; Chen, B.; Zhang, Jian J.; Zhang, H.

    2015-01-01

    Dehydrated core/shell fruits, such as jujubes, raisins and plums, show very complex buckles and wrinkles on their exocarp. It is a challenging task to model such complicated patterns and their evolution in a virtual environment even for professional animators. This paper presents a unified physically-based approach to simulate the morphological transformation for the core/shell fruits in the dehydration process. A finite element method (FEM), which is based on the multiplicative decomposition...

  11. Galois Corings and a Jacobson-Bourbaki type Correspondence

    OpenAIRE

    Cuadra, J.; Gomez-Torrecillas, J.

    2005-01-01

    The Jacobson-Bourbaki Theorem for division rings was formulated in terms of corings by Sweedler in 1975. Finiteness conditions hypotheses are not required in this new approach. In this paper we extend Sweedler's result to simple artinian rings using a particular class of corings, comatrix corings. A Jacobson-Bourbaki like correspondence for simple artinian rings is then obtained by duality.

  12. Thermodynamics, core-level spectroscopy, morphology, and work function study of different TiCl3 crystalline phases: A theoretical approach

    International Nuclear Information System (INIS)

    Guo, Lei; Li, Wenpo; Feng, Wenjiang; Zhang, Zhipeng; Zhang, Shengtao

    2014-01-01

    Highlights: • Three TiCl 3 polymorphs materials were systematically investigated. • Structural results agree well with experimental and available theoretical data. • Morphological and thermodynamic properties were computed and analyzed. • Core-level spectroscopy and work function were obtained. - Abstract: Computer simulation has been widely applied in many research fields owing to its superiority in revealing an insight understanding of the phenomena. In this work, the thermodynamics, core-level spectroscopy, morphology, and work function of TiCl 3 with three different crystalline phases (α, β, and γ) have been comprehensively computed employing the Materials Studio package. Our computational DFT-D approach gives a structural description of the TiCl 3 phases in good agreement with experiment. The core-level spectroscopy confirmed that α, β, and γ modifications for TiCl 3 have lightly affected on the valences of the constitutional elements. A series of possible growth faces (h k l) were deduced using the classic Bravais–Friedel–Donnay–Harker (BFDH) model. We conclude that the sequence of work function for (0 0 1) surface was α > β ≈ γ

  13. Development of a New core/reflector model for coarse-mesh nodal methods

    International Nuclear Information System (INIS)

    Pogosbekyan, Leonid; Cho, Jin Young; Kim, Young Il; Kim, Young Jin; Joo, Hyung Kuk; Chang, Moon Hee.

    1997-10-01

    This work presents two approaches for reflector simulation in coarse-mesh nodal methods. The first approach is called Interface Matrix Technique (IMT), which simulates the baffle as a banishingly thin layer having the property of reflection and transmission. We applied this technique within the frame of AFEN (Analytic Function Expansion Nodal) method, and developed the AFEN-IM (Interface Matrix) method. AFEN-IM method shows 1.24% and 0.42 % in maximum and RMS (Root Mean Square) assemblywise power error for ZION-1 benchmark problem. The second approach is L-shaped reflector homogenization method. This method is based on the integral response conservation along the L-shaped core-reflector interface. The reference reflector response is calculated from 2-dimensional spectral calculation and the response of the homogenized reflector is derived from the one-node 2-dimensional AFEN problem solution. This method shows 5 times better accuracy than the 1-dimensional homogenization technique in the assemblywise power. Also, the concept of shroud/reflector homogenization for hexagonal core have been developed. The 1-dimensional spectral calculation was used for the determination of 2 group cross sections. The essence of homogenization concept consists in the calculation of equivalent shroud width, which preserve albedo for the fast neutrons in 2-dimensional reflector. This method shows a relative error less than 0.42% in assemblywise power and a difference of 9x10 -5 in multiplication factor for full-core model. (author). 9 refs., 3 tabs., 28 figs

  14. Tailored Core Shell Cathode Powders for Solid Oxide Fuel Cells

    Energy Technology Data Exchange (ETDEWEB)

    Swartz, Scott [NexTech Materials, Ltd.,Lewis Center, OH (United States)

    2015-03-23

    In this Phase I SBIR project, a “core-shell” composite cathode approach was evaluated for improving SOFC performance and reducing degradation of lanthanum strontium cobalt ferrite (LSCF) cathode materials, following previous successful demonstrations of infiltration approaches for achieving the same goals. The intent was to establish core-shell cathode powders that enabled high performance to be obtained with “drop-in” process capability for SOFC manufacturing (i.e., rather than adding an infiltration step to the SOFC manufacturing process). Milling, precipitation and hetero-coagulation methods were evaluated for making core-shell composite cathode powders comprised of coarse LSCF “core” particles and nanoscale “shell” particles of lanthanum strontium manganite (LSM) or praseodymium strontium manganite (PSM). Precipitation and hetero-coagulation methods were successful for obtaining the targeted core-shell morphology, although perfect coverage of the LSCF core particles by the LSM and PSM particles was not obtained. Electrochemical characterization of core-shell cathode powders and conventional (baseline) cathode powders was performed via electrochemical impedance spectroscopy (EIS) half-cell measurements and single-cell SOFC testing. Reliable EIS testing methods were established, which enabled comparative area-specific resistance measurements to be obtained. A single-cell SOFC testing approach also was established that enabled cathode resistance to be separated from overall cell resistance, and for cathode degradation to be separated from overall cell degradation. The results of these EIS and SOFC tests conclusively determined that the core-shell cathode powders resulted in significant lowering of performance, compared to the baseline cathodes. Based on the results of this project, it was concluded that the core-shell cathode approach did not warrant further investigation.

  15. The digital revolution at the core of Engie's transformation

    International Nuclear Information System (INIS)

    Bourgain, Gilles; Saintes, Philippe; Weiss, Maxime; Giordano, Vincenzo; Gehain, Etienne

    2017-01-01

    More than two billion people on the planet do not have access to a reliable supply of electricity, even as greenhouse gas emissions are to approach zero in the long term. It is urgent to invent an energy system by drawing on current trends in technology and galvanizing political and industrial actors. The digital revolution is a tool for accelerating the energy revolution, a catalyst for changes in the energy sector. In 2016, Engie underwent a thoroughgoing transformation in order to become the world leader in the energy revolution. Digital technology lies at the core of this transformation. It provides powerful leverage for cementing relations between the Engie Group and its stakeholders, making the group more operationally efficient, developing new business activities and improving agility

  16. Simplified P{sub n} transport core calculations in the Apollo3 system

    Energy Technology Data Exchange (ETDEWEB)

    Baudron, Anne-Marie; Lautard, Jean-Jacques, E-mail: anne-marie.baudron@cea.fr, E-mail: jean-jacques.lautard@cea.fr [Commissariat a l' Energie Atomique et aux Energies Alternatives, CEA Saclay, Gif-sur-Yvette (France)

    2011-07-01

    This paper describes the development of two different neutronics core solvers based on the Simplified P{sub N} transport (SP{sub N}) approximation developed in the context of a new generation nuclear reactor computational system, APOLLO3. Two different approaches have been used. The first one solves the standard SPN system. In the second approach, the SP{sub N} equations are solved as diffusion equations by treating the SP{sub N} flux harmonics like pseudo energy groups, obtained by a change of variable. These two methods have been implemented for Cartesian and hexagonal geometries in the kinetics solver MINOS. The numerical approximation is based on the mixed dual finite formulation and the discretization uses the Raviart-Thomas-Nedelec finite elements. For the unstructured geometries, the SP{sub N} equations are treated by the SN transport solver MINARET by considering the second SP{sub N} approach. The MINARET solver is based on discontinuous Galerkin finite element approximation on cylindrical unstructured meshes composed of a set of conforming triangles for the radial direction. Numerical applications are presented for both solvers in different core configurations (the Jules Horowitz research reactor (JHR) and the Generation IV fast reactor project ESFR). (author)

  17. Core seismic behaviour: linear and non-linear models

    International Nuclear Information System (INIS)

    Bernard, M.; Van Dorsselaere, M.; Gauvain, M.; Jenapierre-Gantenbein, M.

    1981-08-01

    The usual methodology for the core seismic behaviour analysis leads to a double complementary approach: to define a core model to be included in the reactor-block seismic response analysis, simple enough but representative of basic movements (diagrid or slab), to define a finer core model, with basic data issued from the first model. This paper presents the history of the different models of both kinds. The inert mass model (IMM) yielded a first rough diagrid movement. The direct linear model (DLM), without shocks and with sodium as an added mass, let to two different ones: DLM 1 with independent movements of the fuel and radial blanket subassemblies, and DLM 2 with a core combined movement. The non-linear (NLM) ''CORALIE'' uses the same basic modelization (Finite Element Beams) but accounts for shocks. It studies the response of a diameter on flats and takes into account the fluid coupling and the wrapper tube flexibility at the pad level. Damping consists of one modal part of 2% and one part due to shocks. Finally, ''CORALIE'' yields the time-history of the displacements and efforts on the supports, but damping (probably greater than 2%) and fluid-structures interaction are still to be precised. The validation experiments were performed on a RAPSODIE core mock-up on scale 1, in similitude of 1/3 as to SPX 1. The equivalent linear model (ELM) was developed for the SPX 1 reactor-block response analysis and a specified seismic level (SB or SM). It is composed of several oscillators fixed to the diagrid and yields the same maximum displacements and efforts than the NLM. The SPX 1 core seismic analysis with a diagrid input spectrum which corresponds to a 0,1 g group acceleration, has been carried out with these models: some aspects of these calculations are presented here

  18. Approach to the HTGR core outlet temperature measurements in the United States

    International Nuclear Information System (INIS)

    Franklin, R.; Rodriguez, C.

    1982-06-01

    The High Temperature Gas-Cooled Reactor (HTGR) constructed at Fort St. Vrain Colorado (330 MWe) used Geminol thermocouples to measure the primary coolant temperature at the core outlet. The primary coolant (helium) is heated by the graphite core to temperatures in the range of 700 deg. to 750 deg. C. The combination of the high temperature, high flow rate and radiation at the core outlet area makes it difficult to obtain accurate temperature measurements. The Geminol thermocouples installed in the Fort St. Vrain reactor have provided accurate data for several years of power operation without any failures. The indicated temperature of the core outlet thermocouples agrees with a ''traversing'' thermocouple measurement to within +-2 deg. C. The Geminol thermocouple wire was provided by the Driver-Harris Company and is similar to the chromel versus alumel thermocouple. Geminol wire is no longer distributed and on future designs, chromel versus alumel wire will be used. The next large HTGR design, which is being performed with funding support from the United States Department of Energy, will incorporate replaceable thermocouples. The thermocouples used in the Fort St. Vrain reactor were permanently installed and large in diameter (6.35 mm) to insure good reliability. The replaceable thermocouples to be used in the next large reactor will be smaller in diameter (3.18 mm). These replaceable thermocouples will be inserted into the core outlet area through long curved guide tubes that are permanently installed. These guide tubes are as long as 18 meters and must be curved to reach the core outlet regions. Tests were conducted to prove that the thermocouples could be inserted and removed through the long curved guide tubes. (author)

  19. Analysis of a multigroup stylized CANDU half-core benchmark

    International Nuclear Information System (INIS)

    Pounders, Justin M.; Rahnema, Farzad; Serghiuta, Dumitru

    2011-01-01

    Highlights: → This paper provides a benchmark that is a stylized model problem in more than two energy groups that is realistic with respect to the underlying physics. → An 8-group cross section library is provided to augment a previously published 2-group 3D stylized half-core CANDU benchmark problem. → Reference eigenvalues and selected pin and bundle fission rates are included. → 2-, 4- and 47-group Monte Carlo solutions are compared to analyze homogenization-free transport approximations that result from energy condensation. - Abstract: An 8-group cross section library is provided to augment a previously published 2-group 3D stylized half-core Canadian deuterium uranium (CANDU) reactor benchmark problem. Reference eigenvalues and selected pin and bundle fission rates are also included. This benchmark is intended to provide computational reactor physicists and methods developers with a stylized model problem in more than two energy groups that is realistic with respect to the underlying physics. In addition to transport theory code verification, the 8-group energy structure provides reactor physicist with an ideal problem for examining cross section homogenization and collapsing effects in a full-core environment. To this end, additional 2-, 4- and 47-group full-core Monte Carlo benchmark solutions are compared to analyze homogenization-free transport approximations incurred as a result of energy group condensation.

  20. Isolated core training improves sprint performance in national-level junior swimmers.

    Science.gov (United States)

    Weston, Matthew; Hibbs, Angela E; Thompson, Kevin G; Spears, Iain R

    2015-03-01

    To quantify the effects of a 12-wk isolated core-training program on 50-m front-crawl swim time and measures of core musculature functionally relevant to swimming. Twenty national-level junior swimmers (10 male and 10 female, 16±1 y, 171±5 cm, 63±4 kg) participated in the study. Group allocation (intervention [n=10], control [n=10]) was based on 2 preexisting swim-training groups who were part of the same swimming club but trained in different groups. The intervention group completed the core training, incorporating exercises targeting the lumbopelvic complex and upper region extending to the scapula, 3 times/wk for 12 wk. While the training was performed in addition to the normal pool-based swimming program, the control group maintained their usual pool-based swimming program. The authors made probabilistic magnitude-based inferences about the effect of the core training on 50-m swim time and functionally relevant measures of core function. Compared with the control group, the core-training intervention group had a possibly large beneficial effect on 50-m swim time (-2.0%; 90% confidence interval -3.8 to -0.2%). Moreover, it showed small to moderate improvements on a timed prone-bridge test (9.0%; 2.1-16.4%) and asymmetric straight-arm pull-down test (23.1%; 13.7-33.4%), and there were moderate to large increases in peak EMG activity of core musculature during isolated tests of maximal voluntary contraction. This is the first study to demonstrate a clear beneficial effect of isolated core training on 50-m front-crawl swim performance.

  1. Comparison of Histologic Core Portions Acquired from a Core Biopsy Needle and a Conventional Needle in Solid Mass Lesions: A Prospective Randomized Trial.

    Science.gov (United States)

    Lee, Ban Seok; Cho, Chang-Min; Jung, Min Kyu; Jang, Jung Sik; Bae, Han Ik

    2017-07-15

    The superiority of endoscopic ultrasound-guided fine needle biopsy (EUS-FNB) over EUS-guided fine needle aspiration (EUS-FNA) remains controversial. Given the lack of studies analyzing histologic specimens acquired from EUS-FNB or EUS-FNA, we compared the proportion of the histologic core obtained from both techniques. A total of 58 consecutive patients with solid mass lesions were enrolled and randomly assigned to the EUS-FNA or EUS-FNB groups. The opposite needle was used after the failure of core tissue acquisition using the initial needle with up to three passes. Using computerized analyses of the scanned histologic slide, the overall area and the area of the histologic core portion in specimens obtained by the two techniques were compared. No significant differences were identified between the two groups with respect to demographic and clinical characteristics. Fewer needle passes were required to obtain core specimens in the FNB group (pcore (11.8%±19.5% vs 8.0%±11.1%, p=0.376) or in the diagnostic accuracy (80.6% vs 81.5%, p=0.935) between two groups. The proportion of histologic core and the diagnostic accuracy were comparable between the FNB and FNA groups. However, fewer needle passes were required to establish an accurate diagnosis in EUS-FNB.

  2. CT-guided core needle biopsy of mediastinal nodes through a transpulmonary approach: retrospective analysis of the procedures conducted over six years.

    Science.gov (United States)

    Yin, Zhongyuan; Liang, Zhiwen; Li, Pengcheng; Wang, Qiong

    2017-08-01

    To retrospectively evaluate the diagnostic performance and complications of a CT-guided core needle cutting biopsy of mediastinal nodes through a transpulmonary approach. From January 2009 to December 2014, we used a coaxial positioning system and an 18G cutting-type biopsy device to perform CT-guided percutaneous transpulmonary needle biopsies of mediastinal nodes for 127 patients. The diagnostic performance, complication rate, influencing factors, distribution of mediastinal nodes and pathological diagnoses were investigated. Among 127 patients, pathologic analyses showed that all of the biopsies were technically successful. The sensitivity, specificity, positive predictive value, and negative predictive value were all 100%. As for complications, the ratios for pneumothorax and hemoptysis were 33.9% and 4.7%, respectively. Multivariate analyses revealed that the distance from the pleura to the target lesion (P = 0.008) and the numbers of visceral pleura injuries (P = 0.006) were the two most significant risk factors for pneumothorax, and that the distance from the pleura to the target lesion (P = 0.004) was the most significant risk factor for hemoptysis. CT-guided core needle cutting biopsy of mediastinal nodes through a transpulmonary approach is a safe and efficient diagnostic method. • CT-guided core needle biopsy is an accurate technique for diagnosing mediastinal nodes. • The rates of complications are similar to those for pulmonary lesion biopsy. • Pneumothorax risk factors include distance from pleura to target lesion and number of visceral pleura. • Distance from pleura to target lesion is the risk factor for hemoptysis. • CT-guided core needle biopsy is an important diagnostic method for mediastinal nodes.

  3. A Comparison of Jungian, Person-Centered, and Gestalt Approaches to Personal Growth Groups.

    Science.gov (United States)

    Day, Bryon; Matthes, William

    1992-01-01

    Compares Jungian approach to personal growth groups to Person-centered and Gestalt approaches. Notes similarities, though Jungian approach adds dimension of "cognitive map" not found in other two. Notes that cognitive map uses constructs from Jung's theory of individuation process, hypothesizing that integration of these constructs into…

  4. Grouping and Read-Across Approaches for Risk Assessment of Nanomaterials.

    Science.gov (United States)

    Oomen, Agnes G; Bleeker, Eric A J; Bos, Peter M J; van Broekhuizen, Fleur; Gottardo, Stefania; Groenewold, Monique; Hristozov, Danail; Hund-Rinke, Kerstin; Irfan, Muhammad-Adeel; Marcomini, Antonio; Peijnenburg, Willie J G M; Rasmussen, Kirsten; Jiménez, Araceli Sánchez; Scott-Fordsmand, Janeck J; van Tongeren, Martie; Wiench, Karin; Wohlleben, Wendel; Landsiedel, Robert

    2015-10-26

    Physicochemical properties of chemicals affect their exposure, toxicokinetics/fate and hazard, and for nanomaterials, the variation of these properties results in a wide variety of materials with potentially different risks. To limit the amount of testing for risk assessment, the information gathering process for nanomaterials needs to be efficient. At the same time, sufficient information to assess the safety of human health and the environment should be available for each nanomaterial. Grouping and read-across approaches can be utilised to meet these goals. This article presents different possible applications of grouping and read-across for nanomaterials within the broader perspective of the MARINA Risk Assessment Strategy (RAS), as developed in the EU FP7 project MARINA. Firstly, nanomaterials can be grouped based on limited variation in physicochemical properties to subsequently design an efficient testing strategy that covers the entire group. Secondly, knowledge about exposure, toxicokinetics/fate or hazard, for example via properties such as dissolution rate, aspect ratio, chemical (non-)activity, can be used to organise similar materials in generic groups to frame issues that need further attention, or potentially to read-across. Thirdly, when data related to specific endpoints is required, read-across can be considered, using data from a source material for the target nanomaterial. Read-across could be based on a scientifically sound justification that exposure, distribution to the target (fate/toxicokinetics) and hazard of the target material are similar to, or less than, the source material. These grouping and read-across approaches pave the way for better use of available information on nanomaterials and are flexible enough to allow future adaptations related to scientific developments.

  5. Grouping and Read-Across Approaches for Risk Assessment of Nanomaterials

    Directory of Open Access Journals (Sweden)

    Agnes G. Oomen

    2015-10-01

    Full Text Available Physicochemical properties of chemicals affect their exposure, toxicokinetics/fate and hazard, and for nanomaterials, the variation of these properties results in a wide variety of materials with potentially different risks. To limit the amount of testing for risk assessment, the information gathering process for nanomaterials needs to be efficient. At the same time, sufficient information to assess the safety of human health and the environment should be available for each nanomaterial. Grouping and read-across approaches can be utilised to meet these goals. This article presents different possible applications of grouping and read-across for nanomaterials within the broader perspective of the MARINA Risk Assessment Strategy (RAS, as developed in the EU FP7 project MARINA. Firstly, nanomaterials can be grouped based on limited variation in physicochemical properties to subsequently design an efficient testing strategy that covers the entire group. Secondly, knowledge about exposure, toxicokinetics/fate or hazard, for example via properties such as dissolution rate, aspect ratio, chemical (non-activity, can be used to organise similar materials in generic groups to frame issues that need further attention, or potentially to read-across. Thirdly, when data related to specific endpoints is required, read-across can be considered, using data from a source material for the target nanomaterial. Read-across could be based on a scientifically sound justification that exposure, distribution to the target (fate/toxicokinetics and hazard of the target material are similar to, or less than, the source material. These grouping and read-across approaches pave the way for better use of available information on nanomaterials and are flexible enough to allow future adaptations related to scientific developments.

  6. Effects of electron-withdrawing group and electron-donating core combinations on physical properties and photovoltaic performance in D-pi-A star-shaped small molecules

    NARCIS (Netherlands)

    Luponosov, Yuriy N.; Min, Jie; Solodukhin, Alexander N.; Kozlov, Oleg V.; Obrezkova, Marina A.; Peregudova, Svetlana M.; Ameri, Tayebeh; Chvalun, Sergei N.; Pshenichnikov, Maxim S.; Brabec, Christoph J.; Ponomarenko, Sergei A.

    The first representatives of star-shaped molecules having 3-alkylrhodanine (alkyl-Rh) electron-withdrawing groups, linked through bithiophene pi-spacer with electron-donating either triphenylamine (TPA) or tris(2-methoxyphenyl)amine (m-TPA) core were synthesized. The physical properties and

  7. The effects of core stabilization exercise on dynamic balance and gait function in stroke patients.

    Science.gov (United States)

    Chung, Eun-Jung; Kim, Jung-Hee; Lee, Byoung-Hee

    2013-07-01

    [Purpose] The purpose of this study was to determine the effects of core stabilization exercise on dynamic balance and gait function in stroke patients. [Subjects] The subjects were 16 stroke patients, who were randomly divided into two groups: a core stabilization exercise group of eight subjects and control group of eight subjects. [Methods] Subjects in both groups received general training five times per week. Subjects in the core stabilization exercise group practiced an additional core stabilization exercise program, which was performed for 30 minutes, three times per week, during a period of four weeks. All subjects were evaluated for dynamic balance (Timed Up and Go test, TUG) and gait parameters (velocity, cadence, step length, and stride length). [Results] Following intervention, the core exercise group showed a significant change in TUG, velocity, and cadence. The only significant difference observed between the core group and control group was in velocity. [Conclusion] The results of this study suggest the feasibility and suitability of core stabilization exercise for stroke patients.

  8. User and Document Group Approach of Clustering in Tagging Systems

    DEFF Research Database (Denmark)

    Pan, Rong; Xu, Guandong; Dolog, Peter

    2010-01-01

    In this paper, we propose a spectral clustering approach for users and documents group modeling in order to capture the common preference and relatedness of users and documents, and to reduce the time complexity of similarity calculations. In experiments, we investigate the selection of the optim...... amount of clusters. We also show a reduction of the time consuming in calculating the similarity for the recommender systems by selecting a centroid first, and then compare the inside item on behalf of each group....

  9. Applications of the renormalization group approach to problems in quantum field theory

    International Nuclear Information System (INIS)

    Renken, R.L.

    1985-01-01

    The presence of fluctuations at many scales of length complicates theories of quantum fields. However, interest is often focused on the low-energy consequences of a theory rather than the short distance fluctuations. In the renormalization-group approach, one takes advantage of this by constructing an effective theory with identical low-energy behavior, but without short distance fluctuations. Three problems of this type are studied here. In chapter 1, an effective lagrangian is used to compute the low-energy consequences of theories of technicolor. Corrections to weak-interaction parameters are found to be small, but conceivably measurable. In chapter 2, the renormalization group approach is applied to second order phase transitions in lattice gauge theories such as the deconfining transition in the U(1) theory. A practical procedure for studying the critical behavior based on Monte Carlo renormalization group methods is described in detail; no numerical results are presented. Chapter 3 addresses the problem of computing the low-energy behavior of atoms directly from Schrodinger's equation. A straightforward approach is described, but is found to be impractical

  10. Renormalization group approach to superfluid neutron matter

    Energy Technology Data Exchange (ETDEWEB)

    Hebeler, K.

    2007-06-06

    In the present thesis superfluid many-fermion systems are investigated in the framework of the Renormalization Group (RG). Starting from an experimentally determined two-body interaction this scheme provides a microscopic approach to strongly correlated many-body systems at low temperatures. The fundamental objects under investigation are the two-point and the four-point vertex functions. We show that explicit results for simple separable interactions on BCS-level can be reproduced in the RG framework to high accuracy. Furthermore the RG approach can immediately be applied to general realistic interaction models. In particular, we show how the complexity of the many-body problem can be reduced systematically by combining different RG schemes. Apart from technical convenience the RG framework has conceptual advantage that correlations beyond the BCS level can be incorporated in the flow equations in a systematic way. In this case however the flow equations are no more explicit equations like at BCS level but instead a coupled set of implicit equations. We show on the basis of explicit calculations for the single-channel case the efficacy of an iterative approach to this system. The generalization of this strategy provides a promising strategy for a non-perturbative treatment of the coupled channel problem. By the coupling of the flow equations of the two-point and four-point vertex self-consistency on the one-body level is guaranteed at every cutoff scale. (orig.)

  11. JOYO MK-II core characteristics database

    International Nuclear Information System (INIS)

    Tabuchi, Shiro; Aoyama, Takafumi; Nagasaki, Hideaki; Kato, Yuichi

    1998-12-01

    The experimental fast reactor JOYO served as the MK-II irradiation bed core for testing fuel and material for FBR development for 15 years from 1982 to 1997. During the MK-II operation, extensive data were accumulated from the core characteristics tests conducted in thirty-one duty operations and thirteen special test operations. These core management data and core characteristics data were compiled into a database. The code system MAGI has been developed and used for core management of JOYO MK-II, and the core characteristics and the irradiation test conditions were calculated using MAGI on the basis of three dimensional diffusion theory with seven neutron energy groups. The core management data include extensive data, which were recorded on CD-ROM for user convenience. The data are specifications and configurations of the core, and for about 300 driver fuel subassemblies and about 60 uninstrumented irradiation subassemblies are core composition before and after irradiation, neutron flux, neutron fluences, fuel and control rod burn-up, and temperature and power distributions. MK-II core characteristics and test conditions were stored in the database for post analysis. Core characteristics data include excess reactivities, control rod worths, and reactivity coefficients, e.g., temperature, power and burn-up. Test conditions include both measured and calculated data for irradiation conditions. (author)

  12. New approach to the design of core support structures for large LMFBR plants

    International Nuclear Information System (INIS)

    Burelbach, J.P.; Kann, W.J.; Pan, Y.C.; Saiveau, J.G.; Seidensticker, R.W.

    1984-01-01

    The paper describes an innovative design concept for a LMFBR Core Support Structure. A hanging Core Support Structure is described and analyzed. The design offers inherent safety features, constructibility advantages, and potential cost reductions

  13. When the Earth's Inner Core Shuffles

    Science.gov (United States)

    Tkalcic, H.; Young, M. K.; Bodin, T.; Ngo, S.; Sambridge, M.

    2011-12-01

    Atlantic generate elastic waves that traverse the Earth's mantle and core, and are recorded by the seismographs located in the northern hemisphere. The waveform doublets produced by repeating earthquakes present a reliable probe, which can reveal temporal changes exhibited by the inner core due to the fact that the mantle effects are minimized. We observe new waveform-doublets at the College station, Alaska, and analyse all existing doublets recorded at that station using state of the art mathematical methods. The complex temporal pattern of differences in travel times between the first and the second event of a doublet is impossible to explain with a simple linear-fit approach. An ensemble approach utilizing transdimensional and hierarchical Bayesian analysis proves to be a powerful approach in this case, relaxing the choices on model parameterization and revealing hitherto unseen complex dynamics of the Earth's inner core.

  14. Controlled fabrication of multi-core alginate microcapsules.

    Science.gov (United States)

    Eqbal, Md Danish; Gundabala, Venkat

    2017-12-01

    In this work, we present a robust microfluidic platform for controlled and complete on-chip generation of alginate microcapsules with single and double liquid cores. A combined Coflow and T-junction configuration implemented in a hybrid glass-PDMS (Polydimethylsiloxane) device is used for the generation of microcapsules with oil as liquid core. Frequency matching of oil-alginate double emulsion generation with that of aqueous Calcium chloride droplet generation allows for controlled merging of the two, resulting in reliable production of microcapsules. Confocal imaging of microcapsule cross-section reveals presence of intact liquid core. In the case of double core microcapsules, the two cores are well separated by alginate layer ensuring their long term stability. The current approach is expected to have advantages over existing techniques for liquid core microcapsule generation in terms of continuity of the process, control over core stability, and non-damage to cells when used for cell encapsulation applications. Copyright © 2017 Elsevier Inc. All rights reserved.

  15. Recent Developments in No-Core Shell-Model Calculations

    International Nuclear Information System (INIS)

    Navratil, P.; Quaglioni, S.; Stetcu, I.; Barrett, B.R.

    2009-01-01

    We present an overview of recent results and developments of the no-core shell model (NCSM), an ab initio approach to the nuclear many-body problem for light nuclei. In this aproach, we start from realistic two-nucleon or two- plus three-nucleon interactions. Many-body calculations are performed using a finite harmonic-oscillator (HO) basis. To facilitate convergence for realistic inter-nucleon interactions that generate strong short-range correlations, we derive effective interactions by unitary transformations that are tailored to the HO basis truncation. For soft realistic interactions this might not be necessary. If that is the case, the NCSM calculations are variational. In either case, the ab initio NCSM preserves translational invariance of the nuclear many-body problem. In this review, we, in particular, highlight results obtained with the chiral two- plus three-nucleon interactions. We discuss efforts to extend the applicability of the NCSM to heavier nuclei and larger model spaces using importance-truncation schemes and/or use of effective interactions with a core. We outline an extension of the ab initio NCSM to the description of nuclear reactions by the resonating group method technique. A future direction of the approach, the ab initio NCSM with continuum, which will provide a complete description of nuclei as open systems with coupling of bound and continuum states is given in the concluding part of the review.

  16. Recent Developments in No-Core Shell-Model Calculations

    Energy Technology Data Exchange (ETDEWEB)

    Navratil, P; Quaglioni, S; Stetcu, I; Barrett, B R

    2009-03-20

    We present an overview of recent results and developments of the no-core shell model (NCSM), an ab initio approach to the nuclear many-body problem for light nuclei. In this aproach, we start from realistic two-nucleon or two- plus three-nucleon interactions. Many-body calculations are performed using a finite harmonic-oscillator (HO) basis. To facilitate convergence for realistic inter-nucleon interactions that generate strong short-range correlations, we derive effective interactions by unitary transformations that are tailored to the HO basis truncation. For soft realistic interactions this might not be necessary. If that is the case, the NCSM calculations are variational. In either case, the ab initio NCSM preserves translational invariance of the nuclear many-body problem. In this review, we, in particular, highlight results obtained with the chiral two- plus three-nucleon interactions. We discuss efforts to extend the applicability of the NCSM to heavier nuclei and larger model spaces using importance-truncation schemes and/or use of effective interactions with a core. We outline an extension of the ab initio NCSM to the description of nuclear reactions by the resonating group method technique. A future direction of the approach, the ab initio NCSM with continuum, which will provide a complete description of nuclei as open systems with coupling of bound and continuum states is given in the concluding part of the review.

  17. COMPARE THE EFFECTIVENESS OF EMG BIOFEEDBACK ASSISSTED CORE STABILITY EXERCISES VERSUS CORE STABILITY EXERCISES ALONE ON PAIN AND DISABILITY IN PATIENTS WITH LOW BACK PAI

    Directory of Open Access Journals (Sweden)

    Gurkirat Kaur

    2016-06-01

    Full Text Available Background: Low Back Pain (LBP is a health related problem than affects 80% of the population within the age limit of 15 to 45 years. The primary treatment used for patients with LBP includes muscle strengthening along with thermotherapeutic modalities. Thus the purpose of the study is to see the efficacy of EMG biofeedback assisted core stability exercises versus core stability exercises alone in patients suffering from pain and disability. Methodology: A total of 30 patients were divided through convenient sampling method into two group- A and B. Each group had 15 patients. In Group A-SWD, traction, IFT and core stability exercises were given where as in Group B EMG biofeedback assisted core stability exercises were given for 5 treatment session per week for 2 weeks and reassessment was done on 5th and 10th day post treatment. Result: The result of the study showed that there was statistically significant (p<0.05 improvement in both Group A and B in terms of pain (NPRS and disability (ODQ after 10th day of treatment. Whereas on comparison within groups the result showed that there was significant (p<0.05 improvement in Group B 10th day post treatment rather than Group A on day 10th. Conclusion: The study supports that EMG biofeedback assisted core stability exercises are helpful for treating patients with LBP to reduce their pain as well as disability.

  18. Core competencies necessary for a managerial psycho-educational training programme for business team coaches

    Directory of Open Access Journals (Sweden)

    Jeanette E. Maritz

    2009-06-01

    Full Text Available The objective of this research was to explore and describe core competencies necessary for a managerial psycho-educational training programme for business team coaches. The total number of participants in this qualitative research was 30. A purposive and snowball sampling strategy was used. Triangulation was achieved through focus groups, in-depth individual interviews and naïve sketches. Data were analysed through an open inductive approach and descriptive analysis. The results describe core competencies of a business team coach as situated within an Outcomes Based Education framework and relate to the knowledge to be discovered, skills to be mastered and the attitudes to be formed during a managerial psycho-educational training programme.

  19. Improved Membership Probability for Moving Groups: Bayesian and Machine Learning Approaches

    Science.gov (United States)

    Lee, Jinhee; Song, Inseok

    2018-01-01

    Gravitationally unbound loose stellar associations (i.e., young nearby moving groups: moving groups hereafter) have been intensively explored because they are important in planet and disk formation studies, exoplanet imaging, and age calibration. Among the many efforts devoted to the search for moving group members, a Bayesian approach (e.g.,using the code BANYAN) has become popular recently because of the many advantages it offers. However, the resultant membership probability needs to be carefully adopted because of its sensitive dependence on input models. In this study, we have developed an improved membership calculation tool focusing on the beta-Pic moving group. We made three improvements for building models used in BANYAN II: (1) updating a list of accepted members by re-assessing memberships in terms of position, motion, and age, (2) investigating member distribution functions in XYZ, and (3) exploring field star distribution functions in XYZUVW. Our improved tool can change membership probability up to 70%. Membership probability is critical and must be better defined. For example, our code identifies only one third of the candidate members in SIMBAD that are believed to be kinematically associated with beta-Pic moving group.Additionally, we performed cluster analysis of young nearby stars using an unsupervised machine learning approach. As more moving groups and their members are identified, the complexity and ambiguity in moving group configuration has been increased. To clarify this issue, we analyzed ~4,000 X-ray bright young stellar candidates. Here, we present the preliminary results. By re-identifying moving groups with the least human intervention, we expect to understand the composition of the solar neighborhood. Moreover better defined moving group membership will help us understand star formation and evolution in relatively low density environments; especially for the low-mass stars which will be identified in the coming Gaia release.

  20. Institutional Management of Core Facilities during Challenging Financial Times

    OpenAIRE

    Haley, Rand

    2011-01-01

    The economic downturn is likely to have lasting effects on institutions of higher education, prioritizing proactive institutional leadership and planning. Although by design, core research facilities are more efficient and effective than supporting individual pieces of research equipment, cores can have significant underlying financial requirements and challenges. This paper explores several possible institutional approaches to managing core facilities during challenging financial times.

  1. Institutional management of core facilities during challenging financial times.

    Science.gov (United States)

    Haley, Rand

    2011-12-01

    The economic downturn is likely to have lasting effects on institutions of higher education, prioritizing proactive institutional leadership and planning. Although by design, core research facilities are more efficient and effective than supporting individual pieces of research equipment, cores can have significant underlying financial requirements and challenges. This paper explores several possible institutional approaches to managing core facilities during challenging financial times.

  2. Surgical Excision of Benign Papillomas Diagnosed with Core Biopsy: A Community Hospital Approach

    International Nuclear Information System (INIS)

    Rozentsvayg, Eka; Carver, Kristen; Borkar, Sunita; Mathew, Melvy; Enis, Sean; Friedman, Paul

    2011-01-01

    Our goal was to assess the value of surgical excision of benign papillomas of the breast diagnosed on percutaneous core biopsy by determining the frequency of upgrade to malignancies and high risk lesions on a final surgical pathology. We reviewed 67 patients who had biopsies yielding benign papilloma and underwent subsequent surgical excision. Surgical pathology of the excised lesions was compared with initial core biopsy pathology results. 54 patients had concordant benign core and excisional pathology. Cancer (ductal carcinoma in situ and invasive ductal carcinoma) was diagnosed in five (7%) patients. Surgery revealed high-risk lesions in 8 (12%) patients, including atypical ductal hyperplasia, atypical lobular hyperplasia, and lobular carcinoma in situ. Cancer and high risk lesions accounted for 13 (19%) upstaging events from benign papilloma diagnosis. Our data suggests that surgical excision is warranted with core pathology of benign papilloma

  3. KAFAX-F22 : development and benchmark of multi-group library for fast reactor using JEF-2.2. Neutron 80 group and Photon 24 group

    International Nuclear Information System (INIS)

    Kim, Jung Do; Gil, Choong Sup.

    1997-03-01

    The KAFAX-F22 was developed from JEF-2.2, which is a MATXS format, multigroup library of fast reactor. The KAFAX-F22 has 80 and 24 energy group structures for neutron and photon, respectively. It includes 89 nuclide data processed by NJOY94.38. The TRANSX/TWODANT system was used for benchmark calculations of fast reactor and one- and two-dimensional calculations of ONEDANT and TWODANT were carried out with 80 group, P 3 S 16 and with 25 group, P 3 S 8 , respectively. The average values of multiplication factors are 0.99652 for MOX cores, 1.00538 for uranium cores and 1.00032 for total cores. Various central reaction rate ratios also give good agreements with the experimental values considering experimental uncertainties except for VERA-11A, VERA-1B, ZPR-6-7 and ZPR-6-6A cores of which experimental values seem to involve some problems. (author). 13 refs., 18 tabs., 2 figs

  4. The Effects of Core Stabilization Exercise on Dynamic Balance and Gait Function in Stroke Patients

    OpenAIRE

    Chung, Eun-Jung; Kim, Jung-Hee; Lee, Byoung-Hee

    2013-01-01

    [Purpose] The purpose of this study was to determine the effects of core stabilization exercise on dynamic balance and gait function in stroke patients. [Subjects] The subjects were 16 stroke patients, who were randomly divided into two groups: a core stabilization exercise group of eight subjects and control group of eight subjects. [Methods] Subjects in both groups received general training five times per week. Subjects in the core stabilization exercise group practiced an additional core s...

  5. Renormalization group approach in the turbulence theory

    International Nuclear Information System (INIS)

    Adzhemyan, L.Ts.; Vasil'ev, A.N.; Pis'mak, Yu.M.

    1983-01-01

    In the framework of the renormalization groUp approach in the turbulence theory sUggested in another paper, the problem of renormalization and evaluation of critical dimensions of composite operators is discussed. Renormalization of a system of operators of canonical dimension equal to 4, including the operator F=phiΔphi (where phi is the velocity field), is considered. It is shown that the critical dimension Δsub(F)=0. The appendice includes the brief proofs of two theorems: 1) the theorem on the equivalence between the arbitrary stochastic problem and quantum field theory; 2) the theorem which determines the reduction of Green functions of the stochastic problem to the hypersurface of coinciding times

  6. The Role of Perceived In-group Moral Superiority in Reparative Intentions and Approach Motivation.

    Science.gov (United States)

    Szabó, Zsolt P; Mészáros, Noémi Z; Csertő, István

    2017-01-01

    Three studies examined how members of a national group react to in-group wrongdoings. We expected that perceived in-group moral superiority would lead to unwillingness to repair the aggression. We also expected that internal-focused emotions such as group-based guilt and group-based shame would predict specific, misdeed-related reparative intentions but not general approach motivation toward the victim groups. In Study 1, facing the in-group's recent aggression, participants who believed that the Hungarians have been more moral throughout their history than members of other nations, used more exonerating cognitions, experienced less in-group critical emotions and showed less willingness to provide reparations for the members of the victim group. Study 2 and Study 3 confirmed most findings of Study 1. Perceived in-group moral superiority directly or indirectly reduced willingness to provide either general or specific reparations, while internally focused in-group critical emotions predicted specific misdeed-related reparative intentions but not general approach motivation. The role of emotional attachment to the in-group is considered.

  7. Numerical studies of rotational core collapse in axisymmetry using the conformally flat metric approach

    International Nuclear Information System (INIS)

    Dimmelmeier, H.; Font, J.A.; Mueller, E.

    2001-01-01

    The numerical simulation of hydrodynamic processes in general relativity is a highly complex problem. In order to reduce the complexity of the gravitational field equations, Wilson and coworkers have proposed an approximation scheme, where the 3-metric γ ij is chosen to be conformally flat. In this approximation the Einstein equations reduce to a set of 5 coupled elliptic equations. In this paper we present an axisymmetric general relativistic hydrodynamic code which utilizes this approach together with high-resolution shock-capturing schemes to solve the hydrodynamic equations. We report on tests and preliminary applications of the code to rotating neutron stars and supernova core collapse in axisymmetry. The code promises good applicability to handle a variety of relativistic astrophysical situations, and is prepared to provide information about gravitational radiation from rotating gravitational collapse. (author)

  8. Renormalization group approach to Sudakov resummation in prompt photon production

    International Nuclear Information System (INIS)

    Bolzoni, Paolo; Forte, Stefano; Ridolfi, Giovanni

    2005-01-01

    We prove the all-order exponentiation of soft logarithmic corrections to prompt photon production in hadronic collisions, by generalizing an approach previously developed in the context of Drell-Yan production and deep-inelastic scattering. We show that all large logs in the soft limit can be expressed in terms of two dimensionful variables, and we use the renormalization group to resum them. The resummed results that we obtain are more general though less predictive than those proposed by other groups, in that they can accommodate for violations of Sudakov factorization

  9. Glocalized Production - A Holistic Approach for Future Manufacturing at The LEGO Group

    DEFF Research Database (Denmark)

    Hadar, Ronen

    2014-01-01

    ) and Rapid Manufacturing (RM). RMS is a manufacturing system that is designed for rapid changes. It is based on core characteristics such as modularity, convertibility, customized flexibility, etc.. RM is the use of Additive Manufacturing (AM –commonly referred to as 3D printing) for the production......Global production is changing. Changes in production paradigms, global competition, manufacturing technologies, and new mega trends such as individualization, inflict immense challenges on global manufacturers. A new holistic approach for facing supply chain and production challenges is proposed...... facilities, the establishment of production close to main markets, and the creation of a global network of independent factories and supply chains with local manufacturing. Doing so will potentially increase responsiveness, cut transportation costs, reduce complexity, enable production to demand rather than...

  10. A new approach to PWR power control using intelligent techniques

    International Nuclear Information System (INIS)

    Boroushaki, M.; Ghofrani, M.B.; Lucas, C.; Yazdanpanah, M.J.; Sadati, N.

    2004-01-01

    Improved load following capability is one of the main technical performances of advanced PWR(APWR). Controlling the nuclear reactor core during load following operation encounters some difficulties. These difficulties mainly arise from nuclear reactor core limitations in local power peaking, while the core is subject to large and sharp variation of local power density during transients. Axial offset (A.O) is the parameter usually used to represent of core power peaking, in form of a practical parameter. This paper, proposes a new intelligent approach to A.o control of PWR nuclear reactors core during load following operation. This method uses a neural network model of the core to predict the dynamic behavior of the core and a fuzzy critic based on the operator knowledge and experience for the purpose of decision-making during load following operations. Simulation results show that this method can use optimum control rod groups maneuver with variable overlapping and may improve the reactor load following capability

  11. The Role of Perceived In-group Moral Superiority in Reparative Intentions and Approach Motivation

    Directory of Open Access Journals (Sweden)

    Zsolt P. Szabó

    2017-05-01

    Full Text Available Three studies examined how members of a national group react to in-group wrongdoings. We expected that perceived in-group moral superiority would lead to unwillingness to repair the aggression. We also expected that internal-focused emotions such as group-based guilt and group-based shame would predict specific, misdeed-related reparative intentions but not general approach motivation toward the victim groups. In Study 1, facing the in-group’s recent aggression, participants who believed that the Hungarians have been more moral throughout their history than members of other nations, used more exonerating cognitions, experienced less in-group critical emotions and showed less willingness to provide reparations for the members of the victim group. Study 2 and Study 3 confirmed most findings of Study 1. Perceived in-group moral superiority directly or indirectly reduced willingness to provide either general or specific reparations, while internally focused in-group critical emotions predicted specific misdeed-related reparative intentions but not general approach motivation. The role of emotional attachment to the in-group is considered.

  12. The EFR project: core and fuel

    International Nuclear Information System (INIS)

    Francillon, E.; Barnes, D.W.; Pay, A.; Wehmann, U.

    1991-01-01

    The draft studies on EFR has beginning, in March 1988. The first part of the summary draft has consisted in the core and fuel domains to harmonize the different approaches used in national projects (SPX2-SNR2-CDFR). Rapidly, the core First Consistent Design has been defined with references to the anterior conceptions. Since this definition, studies have been engaged on the management (mean burnup amelioration) and on the conception (breeding gain, sodium void coefficient reduction). After a presentation of the basis options and on the general conception of the fuel assemblies we make a point on the core and the interfaces with the fuel cycle [fr

  13. Exploring the Impact of Students' Learning Approach on Collaborative Group Modeling of Blood Circulation

    Science.gov (United States)

    Lee, Shinyoung; Kang, Eunhee; Kim, Heui-Baik

    2015-01-01

    This study aimed to explore the effect on group dynamics of statements associated with deep learning approaches (DLA) and their contribution to cognitive collaboration and model development during group modeling of blood circulation. A group was selected for an in-depth analysis of collaborative group modeling. This group constructed a model in a…

  14. A 3-Component Approach Incorporating Focus Groups in Strategic Planning for Sexual Violence Prevention.

    Science.gov (United States)

    Cruz, Theresa H; Hess, Julia Meredith; Woelk, Leona; Bear, Samantha

    2016-01-01

    Sexual violence is of special concern in New Mexico because of the presence of large priority populations in which its prevalence is high. This article describes a 3-component approach to developing a strategic plan to prevent sexual violence in the state that consisted of an advisory group, subject matter experts, and focus groups from geographically and demographically diverse communities. Both common and community-specific themes emerged from the focus groups and were included in the strategic plan. By incorporating community needs and experiences, this approach fosters increased investment in plan implementation.

  15. An Approach to Supervision for Doctoral and Entry-Level Group Counseling Students

    Science.gov (United States)

    Walsh, Robyn; Bambacus, Elizabeth; Gibson, Donna

    2017-01-01

    The purpose of this article is to provide a supervision approach to experiential groups that replaces professors with doctoral students in the chain of supervision, enlists a faculty member to provide supervision of supervision to the doctoral students, and translates supervision theory to meet the unique needs of group counseling supervision.…

  16. Characteristics of core sampling from crumbing Paleozoic rock

    Energy Technology Data Exchange (ETDEWEB)

    Barabashkin, I I; Edelman, Y A; Filippov, V N; Lychev, V N

    1981-01-01

    The results of analysis of core sampling using standard core sampling tools with small and medium inside diameter are cited. It is demonstrated that when using these tools loss of core in Paleozoic deposits promising with regard to oil and gas content does not exceed 25 - 30%. The use of a new core sampling tool with a large inside diameter which includes drill bits of different types and a core lifter ''Krembriy'' SKU-172/100 made it possible to increase core removal approximately 52%. A representative core from a highly crumbling and vesicular rock belinging to groups III - IV in terms of difficulty of core sampling was obtained first. A description of a new core sampling tool is given. The characteristics of the technology of its use which promote preservation of the core are cited. Means of continued improvement of this tool are noted.

  17. Update on the MRI Core of the Alzheimer's Disease Neuroimaging Initiative

    Science.gov (United States)

    Jack, Clifford R; Bernstein, Matt A; Borowski, Bret J; Gunter, Jeffrey L; Fox, Nick C; Thompson, Paul M; Schuff, Norbert; Krueger, Gunnar; Killiany, Ronald J; DeCarli, Charles S; Dale, Anders M; Weiner, Michael W

    2010-01-01

    Functions of the ADNI MRI core fall into three categories: (1) those of the central MRI core lab at Mayo Clinic, Rochester, Minnesota, needed to generate high quality MRI data in all subjects at each time point; (2) those of the funded ADNI MRI core imaging analysis groups responsible for analyzing the MRI data, and (3) the joint function of the entire MRI core in designing and problem solving MR image acquisition, pre-processing and analyses methods. The primary objective of ADNI was and continues to be improving methods for clinical trials in Alzheimer's disease. Our approach to the present (“ADNI-GO”) and future (“ADNI-2”, if funded) MRI protocol will be to maintain MRI methodological consistency in previously enrolled “ADNI-1” subjects who are followed longitudinally in ADNI-GO and ADNI-2. We will modernize and expand the MRI protocol for all newly enrolled ADNI-GO and ADNI-2 subjects. All newly enrolled subjects will be scanned at 3T with a core set of three sequence types: 3D T1-weighted volume, FLAIR, and a long TE gradient echo volumetric acquisition for micro hemorrhage detection. In addition to this core ADNI-GO and ADNI-2 protocol, we will perform vendor specific pilot sub-studies of arterial spin labeling perfusion, resting state functional connectivity and diffusion tensor imaging. One each of these sequences will be added to the core protocol on systems from each MRI vendor. These experimental sub-studies are designed to demonstrate the feasibility of acquiring useful data in a multi-center (but single vendor) setting for these three emerging MRI applications. PMID:20451869

  18. Nonperturbative Renormalization Group Approach to Polymerized Membranes

    Science.gov (United States)

    Essafi, Karim; Kownacki, Jean-Philippe; Mouhanna, Dominique

    2014-03-01

    Membranes or membrane-like materials play an important role in many fields ranging from biology to physics. These systems form a very rich domain in statistical physics. The interplay between geometry and thermal fluctuations lead to exciting phases such flat, tubular and disordered flat phases. Roughly speaking, membranes can be divided into two group: fluid membranes in which the molecules are free to diffuse and thus no shear modulus. On the other hand, in polymerized membranes the connectivity is fixed which leads to elastic forces. This difference between fluid and polymerized membranes leads to a difference in their critical behaviour. For instance, fluid membranes are always crumpled, whereas polymerized membranes exhibit a phase transition between a crumpled phase and a flat phase. In this talk, I will focus only on polymerized phantom, i.e. non-self-avoiding, membranes. The critical behaviour of both isotropic and anisotropic polymerized membranes are studied using a nonperturbative renormalization group approach (NPRG). This allows for the investigation of the phase transitions and the low temperature flat phase in any internal dimension D and embedding d. Interestingly, graphene behaves just as a polymerized membrane in its flat phase.

  19. Evaluating the core microbiota in complex communities: A systematic investigation.

    Science.gov (United States)

    Astudillo-García, Carmen; Bell, James J; Webster, Nicole S; Glasl, Bettina; Jompa, Jamaluddin; Montoya, Jose M; Taylor, Michael W

    2017-04-01

    The study of complex microbial communities poses unique conceptual and analytical challenges, with microbial species potentially numbering in the thousands. With transient or allochthonous microorganisms often adding to this complexity, a 'core' microbiota approach, focusing only on the stable and permanent members of the community, is becoming increasingly popular. Given the various ways of defining a core microbiota, it is prudent to examine whether the definition of the core impacts upon the results obtained. Here we used complex marine sponge microbiotas and undertook a systematic evaluation of the degree to which different factors used to define the core influenced the conclusions. Significant differences in alpha- and beta-diversity were detected using some but not all core definitions. However, findings related to host specificity and environmental quality were largely insensitive to major changes in the core microbiota definition. Furthermore, none of the applied definitions altered our perception of the ecological networks summarising interactions among bacteria within the sponges. These results suggest that, while care should still be taken in interpretation, the core microbiota approach is surprisingly robust, at least for comparing microbiotas of closely related samples. © 2017 Society for Applied Microbiology and John Wiley & Sons Ltd.

  20. Group Dynamics and Individual Roles: A Differentiated Approach to Social-Emotional Learning

    Science.gov (United States)

    Dugas, Daryl

    2017-01-01

    Differentiated instruction is a set of strategies to help teachers meet each child where he or she is in order to improve students' engagement, lead them to do their best work, and maximize their success. This article describes a differentiated classroom management approach based in group dynamics which focuses on the development of group norms…

  1. Role of ligand-ligand vs. core-core interactions in gold nanoclusters.

    Science.gov (United States)

    Milowska, Karolina Z; Stolarczyk, Jacek K

    2016-05-14

    The controlled assembly of ligand-coated gold nanoclusters (NCs) into larger structures paves the way for new applications ranging from electronics to nanomedicine. Here, we demonstrate through rigorous density functional theory (DFT) calculations employing novel functionals accounting for van der Waals forces that the ligand-ligand interactions determine whether stable assemblies can be formed. The study of NCs with different core sizes, symmetry forms, ligand lengths, mutual crystal orientations, and in the presence of a solvent suggests that core-to-core van der Waals interactions play a lesser role in the assembly. The dominant interactions originate from combination of steric effects, augmented by ligand bundling on NC facets, and related to them changes in electronic properties induced by neighbouring NCs. We also show that, in contrast to standard colloidal theory approach, DFT correctly reproduces the surprising experimental trends in the strength of the inter-particle interaction observed when varying the length of the ligands. The results underpin the importance of understanding NC interactions in designing gold NCs for a specific function.

  2. Proposal of a benchmark for core burnup calculations for a VVER-1000 reactor core

    International Nuclear Information System (INIS)

    Loetsch, T.; Khalimonchuk, V.; Kuchin, A.

    2009-01-01

    In the framework of a project supported by the German BMU the code DYN3D should be further validated and verified. During the work a lack of a benchmark on core burnup calculations for VVER-1000 reactors was noticed. Such a benchmark is useful for validating and verifying the whole package of codes and data libraries for reactor physics calculations including fuel assembly modelling, fuel assembly data preparation, few group data parametrisation and reactor core modelling. The benchmark proposed specifies the core loading patterns of burnup cycles for a VVER-1000 reactor core as well as a set of operational data such as load follow, boron concentration in the coolant, cycle length, measured reactivity coefficients and power density distributions. The reactor core characteristics chosen for comparison and the first results obtained during the work with the reactor physics code DYN3D are presented. This work presents the continuation of efforts of the projects mentioned to estimate the accuracy of calculated characteristics of VVER-1000 reactor cores. In addition, the codes used for reactor physics calculations of safety related reactor core characteristics should be validated and verified for the cases in which they are to be used. This is significant for safety related evaluations and assessments carried out in the framework of licensing and supervision procedures in the field of reactor physics. (authors)

  3. Detection of cores in fingerprints with improved dimension reduction

    NARCIS (Netherlands)

    Bazen, A.M.; Veldhuis, Raymond N.J.

    In this paper, we present a statistical approach to core detection in fingerprint images that is based on the likelihood ratio, using models of variation of core templates and randomly chosen templates. Additionally, we propose an alternative dimension reduction method. Unlike standard linear

  4. Multilevel criticality computations in AREVA NP'S core simulation code artemis - 195

    International Nuclear Information System (INIS)

    Van Geemert, R.

    2010-01-01

    This paper discusses the multi-level critical boron iteration approach that is applied per default in AREVA NP's whole-core neutronics and thermal hydraulics core simulation program ARTEMIS. This multi-level approach is characterized by the projection of variational boron concentration adjustments to the coarser mesh levels in a multi-level re-balancing hierarchy that is associated with the nodal flux equations to be solved in steady-state core simulation. At each individual re-balancing mesh level, optimized variational criticality tuning formulas are applied. The latter drive the core model to a numerically highly accurate self-sustaining state (i.e. with the neutronic eigenvalue being 1 up to a very high numerical precision) by continuous adjustment of the boron concentration as a system-wide scalar criticality parameter. Due to the default application of this approach in ARTEMIS reactor cycle simulations, an accuracy of all critical boron concentration estimates better than 0.001 ppm is enabled for all burnup time steps in a computationally efficient way. This high accuracy is relevant for precision optimization in industrial core simulation as well as for enabling accurate reactivity perturbation assessments. The developed approach is presented from a numerical methodology point of view with an emphasis on the multi-grid aspect of the concept. Furthermore, an application-relevant verification is presented in terms of achieved coupled iteration convergence efficiency for an application-representative industrial core cycle computation. (authors)

  5. Small Launch Vehicle Design Approaches: Clustered Cores Compared with Multi-Stage Inline Concepts

    Science.gov (United States)

    Waters, Eric D.; Beers, Benjamin; Esther, Elizabeth; Philips, Alan; Threet, Grady E., Jr.

    2013-01-01

    In an effort to better define small launch vehicle design options two approaches were investigated from the small launch vehicle trade space. The primary focus was to evaluate a clustered common core design against a purpose built inline vehicle. Both designs focused on liquid oxygen (LOX) and rocket propellant grade kerosene (RP-1) stages with the terminal stage later evaluated as a LOX/methane (CH4) stage. A series of performance optimization runs were done in order to minimize gross liftoff weight (GLOW) including alternative thrust levels, delivery altitude for payload, vehicle length to diameter ratio, alternative engine feed systems, re-evaluation of mass growth allowances, passive versus active guidance systems, and rail and tower launch methods. Additionally manufacturability, cost, and operations also play a large role in the benefits and detriments for each design. Presented here is the Advanced Concepts Office's Earth to Orbit Launch Team methodology and high level discussion of the performance trades and trends of both small launch vehicle solutions along with design philosophies that shaped both concepts. Without putting forth a decree stating one approach is better than the other; this discussion is meant to educate the community at large and let the reader determine which architecture is truly the most economical; since each path has such a unique set of limitations and potential payoffs.

  6. One dimensional reactor core model

    International Nuclear Information System (INIS)

    Kostadinov, V.; Stritar, A.; Radovo, M.; Mavko, B.

    1984-01-01

    The one dimensional model of neutron dynamic in reactor core was developed. The core was divided in several axial nodes. The one group neutron diffusion equation for each node is solved. Feedback affects of fuel and water temperatures is calculated. The influence of xenon, boron and control rods is included in cross section calculations for each node. The system of equations is solved implicitly. The model is used in basic principle Training Simulator of NPP Krsko. (author)

  7. Core vocabulary in the narratives of bilingual children with and without language impairment.

    Science.gov (United States)

    Shivabasappa, Prarthana; Peña, Elizabeth D; Bedore, Lisa M

    2017-09-22

    Children with primary language impairment (PLI) demonstrate deficits in morphosyntax and vocabulary. We studied how these deficits may manifest in the core vocabulary use of bilingual children with PLI. Thirty bilingual children with and without PLI who were matched pairwise (experimental group) narrated two Spanish and two English stories in kindergarten and first grade. Core vocabulary was derived from the 30 most frequently used words in the stories of 65 and 37 typically developing (TD) first graders (normative group) for Spanish and English, respectively. The number of words each child in the experimental group produced out of the 30 identified core vocabulary words and frequency of each of the core words produced each year were analysed. Children with PLI produced fewer core vocabulary words compared to their TD peers after controlling for total words produced. This difference was more pronounced in first grade. They produced core vocabulary words less frequently in kindergarten than their TD peers. Both groups produced core vocabulary words more frequently in English than Spanish. Bilingual children with PLI demonstrate a less productive core vocabulary use compared to their TD peers in both their languages illustrating the nature of their grammatical and lexical-semantic deficits.

  8. Automatic determination of pressurized water reactor core loading patterns which maximize end-of-cycle reactivity within power peaking and burnup constraints

    International Nuclear Information System (INIS)

    Hobson, G.H.

    1985-01-01

    An automated procedure for determining the optimal core loading pattern for a pressurized water reactor which maximizes end-of-cycle k/sub eff/ while satisfying constraints on power peaking and discharge burnup has been developed. The optimization algorithm combines a two energy group, two-dimensional coarse-mesh finite difference diffusion theory neutronics model to simulate core conditions, a perturbation theory approach to determine reactivity, flux, power and burnup changes as a function of assembly shuffling, and Monte Carlo integer programming to select the optimal loading pattern solution. The core examined was a typical Cycle 2 reload with no burnable poisons. Results indicate that the core loading pattern that maximizes end-of-cycle k/sub eff/ results in a 5.4% decrease in fuel cycle costs compared with the core loading pattern that minimizes the maximum relative radial power peak

  9. PLGA-lecithin-PEG core-shell nanoparticles for controlled drug delivery.

    Science.gov (United States)

    Chan, Juliana M; Zhang, Liangfang; Yuet, Kai P; Liao, Grace; Rhee, June-Wha; Langer, Robert; Farokhzad, Omid C

    2009-03-01

    Current approaches to encapsulate and deliver therapeutic compounds have focused on developing liposomal and biodegradable polymeric nanoparticles (NPs), resulting in clinically approved therapeutics such as Doxil/Caelyx and Genexol-PM, respectively. Our group recently reported the development of biodegradable core-shell NP systems that combined the beneficial properties of liposomal and polymeric NPs for controlled drug delivery. Herein we report the parameters that alter the biological and physicochemical characteristics, stability, drug release properties and cytotoxicity of these core-shell NPs. We further define scalable processes for the formulation of these NPs in a reproducible manner. These core-shell NPs consist of (i) a poly(D,L-lactide-co-glycolide) hydrophobic core, (ii) a soybean lecithin monolayer, and (iii) a poly(ethylene glycol) shell, and were synthesized by a modified nanoprecipitation method combined with self-assembly. Preparation of the NPs showed that various formulation parameters such as the lipid/polymer mass ratio and lipid/lipid-PEG molar ratio controlled NP physical stability and size. We encapsulated a model chemotherapy drug, docetaxel, in the NPs and showed that the amount of lipid coverage affected its drug release kinetics. Next, we demonstrated a potentially scalable process for the formulation, purification, and storage of NPs. Finally, we tested the cytotoxicity using MTT assays on two model human cell lines, HeLa and HepG2, and demonstrated the biocompatibility of these particles in vitro. Our data suggest that the PLGA-lecithin-PEG core-shell NPs may be a useful new controlled release drug delivery system.

  10. On-line thermal margin estimation of a PWR core using a neural network approach

    International Nuclear Information System (INIS)

    Park, Soon Ok; Kim, Hyun Koon; Lee, Seung Hynk; Chang, Soon Heung

    1992-01-01

    A new approach for on-line thermal margin monitoring of a PWR Core is proposed in this paper, where a neural network model is introduced to predict the DNBR values at the given reactor operating conditions. The neural network is learned by the Back Propagation algorithm with the optimized random training data and is tested to investigate the generalized performance for the steady state operating region as well as for the transient situations where DNB is of the primary concern. The test results show that the high level of accuracy in predicting the DNBR can be achieved by the neural network model compared to the detailed code results. An insight has been gained from this study that the neural network model for estimating DNB performance can be a viable tool for on-line thermal margin monitoring of a nuclear power plant

  11. Optimizations of Unstructured Aerodynamics Computations for Many-core Architectures

    KAUST Repository

    Al Farhan, Mohammed Ahmed; Keyes, David E.

    2018-01-01

    involving thread and data-level parallelism. Our approach is based upon a multi-level hierarchical distribution of work and data across both the threads and the SIMD units within every hardware core. On a 64-core KNL chip, we achieve nearly 2.9x speedup

  12. Ni@Ru and NiCo@Ru Core-Shell Hexagonal Nanosandwiches with a Compositionally Tunable Core and a Regioselectively Grown Shell.

    Science.gov (United States)

    Hwang, Hyeyoun; Kwon, Taehyun; Kim, Ho Young; Park, Jongsik; Oh, Aram; Kim, Byeongyoon; Baik, Hionsuck; Joo, Sang Hoon; Lee, Kwangyeol

    2018-01-01

    The development of highly active electrocatalysts is crucial for the advancement of renewable energy conversion devices. The design of core-shell nanoparticle catalysts represents a promising approach to boost catalytic activity as well as save the use of expensive precious metals. Here, a simple, one-step synthetic route is reported to prepare hexagonal nanosandwich-shaped Ni@Ru core-shell nanoparticles (Ni@Ru HNS), in which Ru shell layers are overgrown in a regioselective manner on the top and bottom, and around the center section of a hexagonal Ni nanoplate core. Notably, the synthesis can be extended to NiCo@Ru core-shell nanoparticles with tunable core compositions (Ni 3 Co x @Ru HNS). Core-shell HNS structures show superior electrocatalytic activity for the oxygen evolution reaction (OER) to a commercial RuO 2 black catalyst, with their OER activity being dependent on their core compositions. The observed trend in OER activity is correlated to the population of Ru oxide (Ru 4+ ) species, which can be modulated by the core compositions. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. EFEKTIVITAS STRATEGI PENGELOMPOKAN BERPASANGAN DALAM PEMBELAJARAN MATEMATIKA MODEL CORE

    Directory of Open Access Journals (Sweden)

    Endah Retnowati

    2017-02-01

    Full Text Available Abstrak: Penelitian ini bertujuan untuk menguji keefektifan pembelajaran CORE (Connect, Organize, Reflect, Extend pada pembelajaran geometri transformasi dengan strategi pengelompokan yang berbeda ditinjau dari kemampuan penalaran, prestasi, dan self efficacy. Penelitian ini merupakan penelitian eksperimen semu dengan populasi siswa kelas XI IPA SMA yang baru pertama kali mempelajari materi geometri transformasi. Sampel penelitian sebanyak dua kelas masing-masing terdiri atas 40 siswa. Siswa belajar dengan dikelompokkan secara berpasangan atau kelompok kecil. Data dikumpulkan dengan teknik tes dan nontes serta dianalisis dengan teknik statistik deskriptif dan inferensial (Manova. Hasil penelitian menunjukkan bahwa pembelajaran CORE strategi berpasangan maupun kelompok kecil efektif ditinjau dari Kriteria Ketuntasan Minimum kemampuan penalaran, prestasi dan self efficacy yang ditetapkan, tetapi tidak terdapat perbedaan yang signifikan di antara kedua strategi pengelompokan tersebut. Repeated measures analysis of variance menunjukkan bahwa kompleksitas materi pembelajaran memengaruhi prestasi belajar secara signifikan. Semakin kompleks materi pembelajaran, penggunaan strategi kelompok kecil lebih baik daripada berpasangan. Kata kunci: CORE, kemampuan penalaran, prestasi belajar, self efficacy THE EFFECTIVENESS OF DYAD STRATEGY DURING MATHEMATICS LEARNING BASED ON CORE MODEL Abstract: The purpose of this study is to test the effectiveness of an instruction, namely CORE (Connect, Organize, Reflect, Extend model, for learning geometry transformation in different grouping strategies (by dyads and small-group work, in terms of reasoning ability, achievement, and self-efficacy. This study was a quasi-experimental research with the entire population of science 11th graders who were novices in geometry transformation. The research samples were two classes which respectively consist of 40 students. Students learned all material either in dyads or small

  14. Addressing Challenges and Scalability in the Synthesis of Thin Uniform Metal Shells on Large Metal Nanoparticle Cores: Case Study of Ag-Pt Core-Shell Nanocubes.

    Science.gov (United States)

    Aslam, Umar; Linic, Suljo

    2017-12-13

    Bimetallic nanoparticles in which a metal is coated with an ultrathin (∼1 nm) layer of a second metal are often desired for their unique chemical and physical properties. Current synthesis methods for producing such core-shell nanostructures often require incremental addition of a shell metal precursor which is rapidly reduced onto metal cores. A major shortcoming of this approach is that it necessitates precise concentrations of chemical reagents, making it difficult to perform at large scales. To address this issue, we considered an approach whereby the reduction of the shell metal precursor was controlled through in situ chemical modification of the precursor. We used this approach to develop a highly scalable synthesis for coating atomic layers of Pt onto Ag nanocubes. We show that Ag-Pt core-shell nanostructures are synthesized in high yields and that these structures effectively combine the optical properties of the plasmonic Ag nanocube core with the surface properties of the thin Pt shell. Additionally, we demonstrate the scalability of the synthesis by performing a 10 times scale-up.

  15. Ab initio effective core potentials for molecular calculations. Potentials for main group elements Na to Bi

    International Nuclear Information System (INIS)

    Wadt, W.R.; Hay, P.J.

    1985-01-01

    A consistent set of ab initio effective core potentials (ECP) has been generated for the main group elements from Na to Bi using the procedure originally developed by Kahn. The ECP's are derived from all-electron numerical Hartree--Fock atomic wave functions and fit to analytical representations for use in molecular calculations. For Rb to Bi the ECP's are generated from the relativistic Hartree--Fock atomic wave functions of Cowan which incorporate the Darwin and mass--velocity terms. Energy-optimized valence basis sets of (3s3p) primitive Gaussians are presented for use with the ECP's. Comparisons between all-electron and valence-electron ECP calculations are presented for NaF, NaCl, Cl 2 , Cl 2 - , Br 2 , Br 2 - , and Xe 2 + . The results show that the average errors introduced by the ECP's are generally only a few percent

  16. Task group of international union of radioecology 'ecosystem approach to environment protection'

    International Nuclear Information System (INIS)

    Fuma, Shoichi

    2011-01-01

    An ecosystem approach is a holistic (i.e., top-down) strategy for protection of ecosystem structures and functions from perturbations. A task group of International Union of Radioecology 'Ecosystem Approach to Environment Protection' was launched in April, 2010. This task group is preparing a report on the following topics: (1) goals of environmental protection; (2) legislation about environmental protection; (3) assessment of the Reference Animals and Plants (RAP) concept in the general context of environmental protection; (4) limitations and uncertainties of the RAPs concept; (5) justification and merits of the ecosystem approach; (6) assessing the feasibility of the ecosystem approach; (7) research and development required for the ecosystem approach; and (8) recommendations with respect to radiation protection. The topics 1, 3, 4 and 5 have been almost completely prepared, and demonstrate that the ecosystem approach is required for radiation protection of the environment. On the other hand, methods of the ecosystem approach which should be adopted for radiation protection of the environment are not clear in the current draft report. They should be specified by reviewing the Convention on Biological Diversity, fish stock management and other activities where the ecosystem approach is already adopted. (author)

  17. An Answer to the AICPA Core Competencies Challenge

    Science.gov (United States)

    Hocking, Deborah E.; Hocking, Ralph T.

    2009-01-01

    For many years the accounting profession has called for a change in the way accounting classes are taught. The AICPA in its Core Competency Framework (1999) has identified three core competency areas that are vital to future success. In this paper we present one successful way to meet this challenge by using a holistic approach to service learning…

  18. An iterative homogenization technique that preserves assembly core exchanges

    International Nuclear Information System (INIS)

    Mondot, Ph.; Sanchez, R.

    2003-01-01

    A new interactive homogenization procedure for reactor core calculations is proposed that requires iterative transport assembly and diffusion core calculations. At each iteration the transport solution of every assembly type is used to produce homogenized cross sections for the core calculation. The converged solution gives assembly fine multigroup transport fluxes that preserve macro-group assembly exchanges in the core. This homogenization avoids the periodic lattice-leakage model approximation and gives detailed assembly transport fluxes without need of an approximated flux reconstruction. Preliminary results are given for a one-dimensional core model. (authors)

  19. A Delphi approach to developing a core competency framework for family practice registered nurses in Ontario.

    Science.gov (United States)

    Moaveni, Azadeh; Gallinaro, Anna; Conn, Lesley Gotlib; Callahan, Sheilagh; Hammond, Melanie; Oandasan, Ivy

    2010-12-01

    This paper describes the results of a Delphi panel process to gain consensus on a role description and competency framework for family practice registered nurses (FP-RNs) in Ontario. Based on the findings from interviews and focus groups with family practice registered nurses and their inter-professional colleagues throughout Ontario, a core competency framework for FP-RNs emerged consisting of six distinct roles - Professional, Expert, Communicator, Synergist, Health Educator and Lifelong Learner - with accompanying enabling competency statements. This framework was refined and validated by a panel of experts from various nursing and family medicine associations and organizations through a Delphi consensus process. This core competency framework for FP-RNs was developed as a stepping stone for clarifying this very important and poorly understood role in family practice. As a result of this research, we expect a greater acknowledgement of the contributions and expertise of the FP-RN as well as the need to celebrate and profile this role. This work has already led to the establishment of a network of stakeholders from nursing organizations in Ontario who are considering opportunities to move the development and use of the competency framework forward.

  20. Some Core Contested Concepts

    Science.gov (United States)

    Chomsky, Noam

    2015-01-01

    Core concepts of language are highly contested. In some cases this is legitimate: real empirical and conceptual issues arise. In other cases, it seems that controversies are based on misunderstanding. A number of crucial cases are reviewed, and an approach to language is outlined that appears to have strong conceptual and empirical motivation, and…

  1. Nuclear reactor core modelling in multifunctional simulators

    International Nuclear Information System (INIS)

    Puska, E.K.

    1999-01-01

    The thesis concentrates on the development of nuclear reactor core models for the APROS multifunctional simulation environment and the use of the core models in various kinds of applications. The work was started in 1986 as a part of the development of the entire APROS simulation system. The aim was to create core models that would serve in a reliable manner in an interactive, modular and multifunctional simulator/plant analyser environment. One-dimensional and three-dimensional core neutronics models have been developed. Both models have two energy groups and six delayed neutron groups. The three-dimensional finite difference type core model is able to describe both BWR- and PWR-type cores with quadratic fuel assemblies and VVER-type cores with hexagonal fuel assemblies. The one- and three-dimensional core neutronics models can be connected with the homogeneous, the five-equation or the six-equation thermal hydraulic models of APROS. The key feature of APROS is that the same physical models can be used in various applications. The nuclear reactor core models of APROS have been built in such a manner that the same models can be used in simulator and plant analyser applications, as well as in safety analysis. In the APROS environment the user can select the number of flow channels in the three-dimensional reactor core and either the homogeneous, the five- or the six-equation thermal hydraulic model for these channels. The thermal hydraulic model and the number of flow channels have a decisive effect on the calculation time of the three-dimensional core model and thus, at present, these particular selections make the major difference between a safety analysis core model and a training simulator core model. The emphasis on this thesis is on the three-dimensional core model and its capability to analyse symmetric and asymmetric events in the core. The factors affecting the calculation times of various three-dimensional BWR, PWR and WWER-type APROS core models have been

  2. Nuclear reactor core modelling in multifunctional simulators

    Energy Technology Data Exchange (ETDEWEB)

    Puska, E.K. [VTT Energy, Nuclear Energy, Espoo (Finland)

    1999-06-01

    The thesis concentrates on the development of nuclear reactor core models for the APROS multifunctional simulation environment and the use of the core models in various kinds of applications. The work was started in 1986 as a part of the development of the entire APROS simulation system. The aim was to create core models that would serve in a reliable manner in an interactive, modular and multifunctional simulator/plant analyser environment. One-dimensional and three-dimensional core neutronics models have been developed. Both models have two energy groups and six delayed neutron groups. The three-dimensional finite difference type core model is able to describe both BWR- and PWR-type cores with quadratic fuel assemblies and VVER-type cores with hexagonal fuel assemblies. The one- and three-dimensional core neutronics models can be connected with the homogeneous, the five-equation or the six-equation thermal hydraulic models of APROS. The key feature of APROS is that the same physical models can be used in various applications. The nuclear reactor core models of APROS have been built in such a manner that the same models can be used in simulator and plant analyser applications, as well as in safety analysis. In the APROS environment the user can select the number of flow channels in the three-dimensional reactor core and either the homogeneous, the five- or the six-equation thermal hydraulic model for these channels. The thermal hydraulic model and the number of flow channels have a decisive effect on the calculation time of the three-dimensional core model and thus, at present, these particular selections make the major difference between a safety analysis core model and a training simulator core model. The emphasis on this thesis is on the three-dimensional core model and its capability to analyse symmetric and asymmetric events in the core. The factors affecting the calculation times of various three-dimensional BWR, PWR and WWER-type APROS core models have been

  3. Development of a coupled neutronic/thermal-hydraulic tool with multi-scale capabilities and applications to HPLWR core analysis

    International Nuclear Information System (INIS)

    Monti, Lanfranco; Starflinger, Joerg; Schulenberg, Thomas

    2011-01-01

    Highlights: → Advanced analysis and design techniques for innovative reactors are addressed. → Detailed investigation of a 3 pass core design with a multi-physics-scales tool. → Coupled 40-group neutron transport/equivalent channels TH core analyses methods. → Multi-scale capabilities: from equivalent channels to sub-channel pin-by-pin study. → High fidelity approach: reduction of conservatism involved in core simulations. - Abstract: The High Performance Light Water Reactor (HPLWR) is a thermal spectrum nuclear reactor cooled and moderated with light water operated at supercritical pressure. It is an innovative reactor concept, which requires developing and applying advanced analysis tools as described in the paper. The relevant water density reduction associated with the heat-up, together with the multi-pass core design, results in a pronounced coupling between neutronic and thermal-hydraulic analyses, which takes into account the strong natural influence of the in-core distribution of power generation and water properties. The neutron flux gradients within the multi-pass core, together with the pronounced dependence of water properties on the temperature, require to consider a fine spatial resolution in which the individual fuel pins are resolved to provide precise evaluation of the clad temperature, currently considered as one of the crucial design criteria. These goals have been achieved considering an advanced analysis method based on the usage of existing codes which have been coupled with developed interfaces. Initially neutronic and thermal-hydraulic full core calculations have been iterated until a consistent solution is found to determine the steady state full power condition of the HPLWR core. Results of few group neutronic analyses might be less reliable in case of HPLWR 3-pass core than for conventional LWRs because of considerable changes of the neutron spectrum within the core, hence 40 groups transport theory has been preferred to the

  4. Photoelastic stress analysis of different prefabricated post-and-core materials.

    Science.gov (United States)

    Asvanund, Pattapon; Morgano, Steven M

    2011-01-01

    The purpose of this study was to investigate stress developed by a combination of a stainless steel post or a fiber-reinforced resin post with a silver amalgam core or a composite resin core. Two-dimensional photoelastic models were used to simulate root dentin. Posts (ParaPost XT and ParaPost-FiberWhite) were cemented with a luting agent (RelyX Unicem). Silver amalgam cores and composite resin cores were fabricated on the posts. Complete crowns were fabricated and cemented on the cores. Each model was analyzed with 2 force magnitudes and in 2 directions. Fringe orders were recorded and compared using ANOVA (p=0.05) and the Scheffe's test. With vertical force, no stress differences occurred among the 4 groups (p=0.159). With a 30-degree force, there was stress differences among the 4 groups (p<0.001). The combination of a fiber-reinforced post and composite resin core could potentially reduce stresses within the radicular dentin when angled loads are applied.

  5. Analysis of core degradation and relocation phenomena and scenarios in a Nordic-type BWR

    Energy Technology Data Exchange (ETDEWEB)

    Galushin, Sergey, E-mail: galushin@kth.se; Kudinov, Pavel, E-mail: pkudinov@kth.se

    2016-12-15

    Highlights: • A data base of the debris properties in lower plenum generated using MELCOR code. • The timing of safety systems has significant effect on the relocated debris properties. • Loose coupling between core relocation and vessel failure analyses was established. - Abstract: Severe Accident Management (SAM) in Nordic Boiling Water Reactors (BWR) employs ex-vessel cooling of core melt debris. The melt is released from the failed vessel and poured into a deep pool of water located under the reactor. The melt is expected to fragment, quench, and form a debris bed, coolable by a natural circulation and evaporation of water. Success of the strategy is contingent upon melt release conditions from the vessel and melt-coolant interaction that determine (i) properties of the debris bed and its coolability (ii) potential for energetic melt-coolant interactions (steam explosions). Risk Oriented Accident Analysis Methodology (ROAAM+) framework is currently under development for quantification of the risks associated with formation of non-coolable debris bed and occurrence of steam explosions, both presenting a credible threats to containment integrity. The ROAAM+ framework consist of loosely coupled models that describe each stage of the accident progression. Core relocation analysis framework provides initial conditions for melt vessel interaction, vessel failure and melt release frameworks. The properties of relocated debris and melt release conditions, including in-vessel and ex-vessel pressure, lower drywell pool depth and temperature, are sensitive to the accident scenarios and timing of safety systems recovery and operator actions. This paper illustrates a methodological approach and relevant data for establishing a connection between core relocation and vessel failure analysis in ROAAM+ approach. MELCOR code is used for analysis of core degradation and relocation phenomena. Properties of relocated debris are obtained as functions of the accident scenario

  6. The Expanded FindCore Method for Identification of a Core Atom Set for Assessment of Protein Structure Prediction

    Science.gov (United States)

    Snyder, David A.; Grullon, Jennifer; Huang, Yuanpeng J.; Tejero, Roberto; Montelione, Gaetano T.

    2014-01-01

    Maximizing the scientific impact of NMR-based structure determination requires robust and statistically sound methods for assessing the precision of NMR-derived structures. In particular, a method to define a core atom set for calculating superimpositions and validating structure predictions is critical to the use of NMR-derived structures as targets in the CASP competition. FindCore (D.A. Snyder and G.T. Montelione PROTEINS 2005;59:673–686) is a superimposition independent method for identifying a core atom set, and partitioning that set into domains. However, as FindCore optimizes superimposition by sensitively excluding not-well-defined atoms, the FindCore core may not comprise all atoms suitable for use in certain applications of NMR structures, including the CASP assessment process. Adapting the FindCore approach to assess predicted models against experimental NMR structures in CASP10 required modification of the FindCore method. This paper describes conventions and a standard protocol to calculate an “Expanded FindCore” atom set suitable for validation and application in biological and biophysical contexts. A key application of the Expanded FindCore method is to identify a core set of atoms in the experimental NMR structure for which it makes sense to validate predicted protein structure models. We demonstrate the application of this Expanded FindCore method in characterizing well-defined regions of 18 NMR-derived CASP10 target structures. The Expanded FindCore protocol defines “expanded core atom sets” that match an expert’s intuition of which parts of the structure are sufficiently well-defined to use in assessing CASP model predictions. We also illustrate the impact of this analysis on the CASP GDT assessment scores. PMID:24327305

  7. Data structure techniques for the graphical special unitary group approach to arbitrary spin representations

    International Nuclear Information System (INIS)

    Kent, R.D.; Schlesinger, M.

    1987-01-01

    For the purpose of computing matrix elements of quantum mechanical operators in complex N-particle systems it is necessary that as much of each irreducible representation be stored in high-speed memory as possible in order to achieve the highest possible rate of computations. A graph theoretic approach to the representation of N-particle systems involving arbitrary single-particle spin is presented. The method involves a generalization of a technique employed by Shavitt in developing the graphical group approach (GUGA) to electronic spin-orbitals. The methods implemented in GENDRT and DRTDIM overcome many deficiencies inherent in other approaches, particularly with respect to utilization of memory resources, computational efficiency in the recognition and evaluation of non-zero matrix elements of certain group theoretic operators and complete labelling of all the basis states of the permutation symmetry (S N ) adapted irreducible representations of SU(n) groups. (orig.)

  8. Recommendations for reporting economic evaluations of haemophilia prophylaxis: a nominal groups consensus statement on behalf of the Economics Expert Working Group of The International Prophylaxis Study Group.

    Science.gov (United States)

    Nicholson, A; Berger, K; Bohn, R; Carcao, M; Fischer, K; Gringeri, A; Hoots, K; Mantovani, L; Schramm, W; van Hout, B A; Willan, A R; Feldman, B M

    2008-01-01

    The need for clearly reported studies evaluating the cost of prophylaxis and its overall outcomes has been recommended from previous literature. To establish minimal ''core standards'' that can be followed when conducting and reporting economic evaluations of hemophilia prophylaxis. Ten members of the IPSG Economic Analysis Working Group participated in a consensus process using the Nominal Groups Technique (NGT). The following topics relating to the economic analysis of prophylaxis studies were addressed; Whose perspective should be taken? Which is the best methodological approach? Is micro- or macro-costing the best costing strategy? What information must be presented about costs and outcomes in order to facilitate local and international interpretation? The group suggests studies on the economic impact of prophylaxis should be viewed from a societal perspective and be reported using a Cost Utility Analysis (CUA) (with consideration of also reporting Cost Benefit Analysis [CBA]). All costs that exceed $500 should be used to measure the costs of prophylaxis (macro strategy) including items such as clotting factor costs, hospitalizations, surgical procedures, productivity loss and number of days lost from school or work. Generic and disease specific quality of lífe and utility measures should be used to report the outcomes of the study. The IPSG has suggested minimal core standards to be applied to the reporting of economic evaluations of hemophilia prophylaxis. Standardized reporting will facilitate the comparison of studies and will allow for more rational policy decisions and treatment choices.

  9. Quantum Chemical Approach to Estimating the Thermodynamics of Metabolic Reactions

    OpenAIRE

    Adrian Jinich; Dmitrij Rappoport; Ian Dunn; Benjamin Sanchez-Lengeling; Roberto Olivares-Amaya; Elad Noor; Arren Bar Even; Alán Aspuru-Guzik

    2014-01-01

    Thermodynamics plays an increasingly important role in modeling and engineering metabolism. We present the first nonempirical computational method for estimating standard Gibbs reaction energies of metabolic reactions based on quantum chemistry, which can help fill in the gaps in the existing thermodynamic data. When applied to a test set of reactions from core metabolism, the quantum chemical approach is comparable in accuracy to group contribution methods for isomerization and group transfe...

  10. CT-guided core needle biopsy of mediastinal nodes through a transpulmonary approach: retrospective analysis of the procedures conducted over six years

    Energy Technology Data Exchange (ETDEWEB)

    Yin, Zhongyuan; Liang, Zhiwen; Li, Pengcheng; Wang, Qiong [Huazhong University of Science and Technology, Cancer Center, Union Hospital, Tongji Medical College, Wuhan (China)

    2017-08-15

    To retrospectively evaluate the diagnostic performance and complications of a CT-guided core needle cutting biopsy of mediastinal nodes through a transpulmonary approach. From January 2009 to December 2014, we used a coaxial positioning system and an 18G cutting-type biopsy device to perform CT-guided percutaneous transpulmonary needle biopsies of mediastinal nodes for 127 patients. The diagnostic performance, complication rate, influencing factors, distribution of mediastinal nodes and pathological diagnoses were investigated. Among 127 patients, pathologic analyses showed that all of the biopsies were technically successful. The sensitivity, specificity, positive predictive value, and negative predictive value were all 100%. As for complications, the ratios for pneumothorax and hemoptysis were 33.9% and 4.7%, respectively. Multivariate analyses revealed that the distance from the pleura to the target lesion (P = 0.008) and the numbers of visceral pleura injuries (P = 0.006) were the two most significant risk factors for pneumothorax, and that the distance from the pleura to the target lesion (P = 0.004) was the most significant risk factor for hemoptysis. CT-guided core needle cutting biopsy of mediastinal nodes through a transpulmonary approach is a safe and efficient diagnostic method. (orig.)

  11. Core design methods for advanced LMFBRs

    International Nuclear Information System (INIS)

    Chandler, J.C.; Marr, D.R.; McCurry, D.C.; Cantley, D.A.

    1977-05-01

    The multidiscipline approach to advanced LMFBR core design requires an iterative design procedure to obtain a closely-coupled design. HEDL's philosophy requires that the designs should be coupled to the extent that the design limiting fuel pin, the design limiting duct and the core reactivity lifetime should all be equal and should equal the fuel residence time. The design procedure consists of an iterative loop involving three stages of the design sequence. Stage 1 consists of general mechanical design and reactor physics scoping calculations to arrive at an initial core layout. Stage 2 consists of detailed reactor physics calculations for the core configuration arrived at in Stage 1. Based upon the detailed reactor physics results, a decision is made either to alter the design (Stage 1) or go to Stage 3. Stage 3 consists of core orificing and detailed component mechanical design calculations. At this point, an assessment is made regarding design adequacy. If the design is inadequate the entire procedure is repeated until the design is acceptable

  12. International workshop of the Confinement Database and Modelling Expert Group in collaboration with the Edge and Pedestal Physics Expert Group

    International Nuclear Information System (INIS)

    Cordey, J.; Kardaun, O.

    2001-01-01

    A Workshop of the Confinement Database and Modelling Expert Group (EG) was held on 2-6 April at the Plasma Physics Research Center of Lausanne (CRPP), Switzerland. Presentations were held on the present status of the plasma pedestal (temperature and energy) scalings from an empirical and theoretical perspective. An integrated approach to modelling tokamaks incorporating core transport, edge pedestal and SOL, together with a model for ELMs was presented by JCT. New experimental data on on global H-mode confinement were discussed and presentations on L-H threshold power were made

  13. Reactor core performance calculating device

    International Nuclear Information System (INIS)

    Tominaga, Kenji; Bando, Masaru; Sano, Hiroki; Maruyama, Hiromi.

    1995-01-01

    The device of the present invention can calculate a power distribution efficiently at high speed by a plurality of calculation means while taking an amount of the reactor state into consideration. Namely, an input device takes data from a measuring device for the amount of the reactor core state such as a large number of neutron detectors disposed in the reactor core for monitoring the reactor state during operation. An input data distribution device comprises a state recognition section and a data distribution section. The state recognition section recognizes the kind and amount of the inputted data and information of the calculation means. The data distribution section analyzes the characteristic of the inputted data, divides them into a several groups, allocates them to each of the calculation means for the purpose of calculating the reactor core performance efficiently at high speed based on the information from the state recognition section. A plurality of the calculation means calculate power distribution of each of regions based on the allocated inputted data, to determine the power distribution of the entire reactor core. As a result, the reactor core can be evaluated at high accuracy and at high speed irrespective of the whole reactor core or partial region. (I.S.)

  14. Identifying target groups for environmentally sustainable transport: assessment of different segmentation approaches

    DEFF Research Database (Denmark)

    Haustein, Sonja; Hunecke, Marcel

    2013-01-01

    Recently, the use of attitude-based market segmentation to promote environmentally sustainable transport has significantly increased. The segmentation of the population into meaningful groups sharing similar attitudes and preferences provides valuable information about how green measures should...... and behavioural segmentations are compared regarding marketing criteria. Although none of the different approaches can claim absolute superiority, attitudinal approaches show advantages in providing startingpoints for interventions to reduce car use....

  15. ROSA full-core and DNBR capabilities

    International Nuclear Information System (INIS)

    Gibcus, H.P.M.; Verhagen, F.C.M.; Wakker, P.H.

    2013-01-01

    The latest developments of the ROSA (Reloading Optimization by Simulated Annealing) code system with an emphasis on the first full-core version and the minimum DNBR (Departure from Nucleate Boiling Ratio) as a new optimization parameter are presented. Designing the core loading pattern of nuclear power plants is becoming a more and more complex task. This task becomes even more complicated if asymmetries in the core loading pattern arise, for instance due to damaged fuel assemblies. For over almost 2 decades ROSA, NRG's (Nuclear Research and consultancy Group) loading pattern optimization code system for PWRs, has proven to be a valuable tool to reactor operators in accomplishing this task. To improve the use of ROSA for designing asymmetric loading patterns, NRG has developed a full-core version of ROSA besides the original quarter-core version which requires rotational symmetry in the computational domain. The extension of ROSA with DNBR as an optimization parameter is part of ROSA's continuous development. (orig.)

  16. ROSA full-core and DNBR capabilities

    International Nuclear Information System (INIS)

    Gibcus, H.P.M.; Verhagen, F.C.M.; Wakker, P.H.

    2012-01-01

    This paper presents the latest developments of the ROSA (Reloading Optimization by Simulated Annealing) code system with an emphasis on the first full-core version and the minimum DNBR (Departure from Nucleate Boiling Ratio) as a new optimization parameter. Designing the core loading pattern of nuclear power plants is becoming a more and more complex task. This task becomes even more complicated if asymmetries in the core loading pattern arise, for instance due to damaged fuel assemblies. For over almost two decades ROSA, NRG's (Nuclear Research and consultancy Group) loading pattern optimization code system for PWRs, has proven to be a valuable tool to reactor operators in accomplishing this task. To improve the use of ROSA for designing asymmetric loading patterns, NRG has developed a full-core version of ROSA besides the original quarter-core version which requires rotational symmetry in the computational domain. The extension of ROSA with DNBR as an optimization parameter is part of ROSA's continuous development. (orig.)

  17. Automated Design and Optimization of Pebble-bed Reactor Cores

    International Nuclear Information System (INIS)

    Gougar, Hans D.; Ougouag, Abderrafi M.; Terry, William K.

    2010-01-01

    We present a conceptual design approach for high-temperature gas-cooled reactors using recirculating pebble-bed cores. The design approach employs PEBBED, a reactor physics code specifically designed to solve for and analyze the asymptotic burnup state of pebble-bed reactors, in conjunction with a genetic algorithm to obtain a core that maximizes a fitness value that is a function of user-specified parameters. The uniqueness of the asymptotic core state and the small number of independent parameters that define it suggest that core geometry and fuel cycle can be efficiently optimized toward a specified objective. PEBBED exploits a novel representation of the distribution of pebbles that enables efficient coupling of the burnup and neutron diffusion solvers. With this method, even complex pebble recirculation schemes can be expressed in terms of a few parameters that are amenable to modern optimization techniques. With PEBBED, the user chooses the type and range of core physics parameters that represent the design space. A set of traits, each with acceptable and preferred values expressed by a simple fitness function, is used to evaluate the candidate reactor cores. The stochastic search algorithm automatically drives the generation of core parameters toward the optimal core as defined by the user. The optimized design can then be modeled and analyzed in greater detail using higher resolution and more computationally demanding tools to confirm the desired characteristics. For this study, the design of pebble-bed high temperature reactor concepts subjected to demanding physical constraints demonstrated the efficacy of the PEBBED algorithm.

  18. A multiobjective approach for solving cooperative n-person games

    Energy Technology Data Exchange (ETDEWEB)

    Maali, Yashar [Department of Industrial Engineering, Payam-e-Noor University, Tehran (Iran)

    2009-11-15

    A linear programming model is introduced to solve cooperative games. The solution is always Pareto optimal. It is based on the idea of the core but instead of requiring rationality for all groups, a multiobjective approach is proposed including the importance weights of the players. A case study illustrates the application of this method. (author)

  19. Moderator temperature coefficient in BWR core

    International Nuclear Information System (INIS)

    Naito, Yoshitaka

    1977-01-01

    Temperature dependences of infinite multiplication factor k sub(infinity) and neutron leakage from the core must be examined for estimation of moderator temperature coefficient. Temperature dependence on k sub(infinity) has been investigated by many researchers, however, the dependence on neutron leakage of a BWR with cruciformed control rods has hardly been done. Because there are difficulties and necessity on calculations of three space dimensional and multi-energy groups neutron distribution in a BWR core. In this study, moderator temperature coefficients of JPDR-II (BWR) core were obtained by calculation with DIFFUSION-ACE, which is newly developed three-dimensional multi-group computer code. The results were compared with experimental data measured from 20 to 275 0 C of the moderator temperature and the good agreement was obtained between calculation and measurement. In order to evaluate neutron leakage from the core, the other two calculations were carried out, adjusting criticality by uniform absorption rate and by material buckling. The former underestimated neutron leakage and the latter overestimated it. Discussion on the results shows that in order to estimate the temperature coefficient of BWR, neutron leakage must be evaluated precisely, therefore the calculation at actual pattern of control rods is necessary. (auth.)

  20. Design study on metal fuel FBR cores

    International Nuclear Information System (INIS)

    Yokoo, T.; Tanaka, Y.; Ogata, T.

    1991-01-01

    A design approach for metal fuel FBR core to maintain fuel integrity during transient events by limiting eutectic/liquid phase formation is proposed based on the current status of metallic fuel development. Its impact as the limitation on the core outlet temperature is assessed through its application to two of CRIEPI's core concepts, high linear power 1000 MWe homogeneous design and medium linear power 300 MWe radially heterogeneous design. SESAME/SALT code is used in this study to analyze steady state and transient fuel behavior. SE2-FA code is developed based on SUPERENERGY-2 and used to analyze core thermal-hydraulics with uncertainties. As the result, the core outlet temperatures of both designs are found to be limited to ≤500degC if it is required to prevent eutectic/liquid phase formation during operational transients in order to guarantee the fuel integrity. Additional assessment is made assuming an advanced limiting condition that allows small liquid phase formation based on the liquid phase penetration rate derived from existing experimental results. The result indicates possibility of raising core outlet temperature to ∼ 530degC. Also, it is found that core design technology improvements such as hot spot factors reduction can contribute to the core outlet temperature extension by 10 ∼ 20degC. (author)

  1. Predictability of Competing Measures of Core Inflation: An Application for Peru Predictability of Competing Measures of Core Inflation: An Application for Peru

    OpenAIRE

    Luis F. Zegarra; Eduardo Morón

    1999-01-01

    A central element of an inflation targeting approach to monetary policy is a proper measure of inflation. The international evidence suggests the use of core inflation measures. In this paper we claim that core inflation should be measured as the underlying trend of inflation that comes from nominal shocks that have no real effect in the long term. However, most of the time core inflation is computed zero weighting observations at the tail of the inflation distribution. Quah and Vahey (1996) ...

  2. The Role of Perceived In-group Moral Superiority in Reparative Intentions and Approach Motivation

    OpenAIRE

    Szabó, Zsolt P.; Mészáros, Noémi Z.; Csertő, István

    2017-01-01

    Three studies examined how members of a national group react to in-group wrongdoings. We expected that perceived in-group moral superiority would lead to unwillingness to repair the aggression. We also expected that internal-focused emotions such as group-based guilt and group-based shame would predict specific, misdeed-related reparative intentions but not general approach motivation toward the victim groups. In Study 1, facing the in-group’s recent aggression, participants who believed that...

  3. Characteristic test of initial HTTR core

    International Nuclear Information System (INIS)

    Nojiri, Naoki; Shimakawa, Satoshi; Fujimoto, Nozomu; Goto, Minoru

    2004-01-01

    This paper describes the results of core physics test in start-up and power-up of the HTTR. The tests were conducted in order to ensure performance and safety of the high temperature gas cooled reactor, and was carried out to measure the critical approach, the excess reactivity, the shutdown margin, the control rod worth, the reactivity coefficient, the neutron flux distribution and the power distribution. The expected core performance and the required reactor safety characteristics were verified from the results of measurements and calculations

  4. CORE COMPETENCIES AND PHASES OF THE ORGANIZATIONAL LIFE CYCLE

    OpenAIRE

    Ahmed, Selma Zone Fekih; Koubaa, Manel Belguith

    2013-01-01

    Organizations evolve according to well-defined phases during which it must raise some competencies more than others. This study discusses the importance of core competencies according to the phases of the life cycle of the organization. In this research, we mobilize the core competencies approach to explore the competence required at each stage of the organizational life cycle. The quantitative study of 50 Tunisian companies operating in the food sector shows that the importance of core ...

  5. In-core fuel management via perturbation theory

    International Nuclear Information System (INIS)

    Mingle, J.O.

    1975-01-01

    A two-step procedure is developed for the optimization of in-core nuclear fuel management using perturbation theory to predict the effects of various core configurations. The first procedure is a cycle cost minimization using linear programming with a zoned core and discrete burnup groups. The second program utilizes an individual fuel assembly shuffling sequence to minimize the maldistribution of power generation. This latter quantity is represented by a figure of merit or by an assembly power peaking factor. A pressurized water reactor example calculation is utilized. 24 references

  6. Feasibility study on embedded transport core calculations

    International Nuclear Information System (INIS)

    Ivanov, B.; Zikatanov, L.; Ivanov, K.

    2007-01-01

    The main objective of this study is to develop an advanced core calculation methodology based on embedded diffusion and transport calculations. The scheme proposed in this work is based on embedded diffusion or SP 3 pin-by-pin local fuel assembly calculation within the framework of the Nodal Expansion Method (NEM) diffusion core calculation. The SP 3 method has gained popularity in the last 10 years as an advanced method for neutronics calculation. NEM is a multi-group nodal diffusion code developed, maintained and continuously improved at the Pennsylvania State University. The developed calculation scheme is a non-linear iteration process, which involves cross-section homogenization, on-line discontinuity factors generation, and boundary conditions evaluation by the global solution passed to the local calculation. In order to accomplish the local calculation, a new code has been developed based on the Finite Elements Method (FEM), which is capable of performing both diffusion and SP 3 calculations. The new code will be used in the framework of the NEM code in order to perform embedded pin-by-pin diffusion and SP 3 calculations on fuel assembly basis. The development of the diffusion and SP 3 FEM code is presented first following by its application to several problems. Description of the proposed embedded scheme is provided next as well as the obtained preliminary results of the C3 MOX benchmark. The results from the embedded calculations are compared with direct pin-by-pin whole core calculations in terms of accuracy and efficiency followed by conclusions made about the feasibility of the proposed embedded approach. (authors)

  7. Core vocabulary of young children with Down syndrome

    NARCIS (Netherlands)

    Deckers, S.R.J.M.; Zaalen, Y. van; Balkom, L.J.M. van; Verhoeven, L.T.W.

    2017-01-01

    The aim of this study was to develop a core vocabulary list for young children with intellectual disabilities between 2 and 7 years of age because data from this population are lacking in core vocabulary literature. Children with Down syndrome are considered one of the most valid reference groups

  8. Updating the Psoriatic Arthritis (PsA) Core Domain Set

    DEFF Research Database (Denmark)

    Orbai, Ana-Maria; de Wit, Maarten; Mease, Philip J

    2017-01-01

    OBJECTIVE: To include the patient perspective in accordance with the Outcome Measures in Rheumatology (OMERACT) Filter 2.0 in the updated Psoriatic Arthritis (PsA) Core Domain Set for randomized controlled trials (RCT) and longitudinal observational studies (LOS). METHODS: At OMERACT 2016, research...... conducted to update the PsA Core Domain Set was presented and discussed in breakout groups. The updated PsA Core Domain Set was voted on and endorsed by OMERACT participants. RESULTS: We conducted a systematic literature review of domains measured in PsA RCT and LOS, and identified 24 domains. We conducted...... and breakout groups at OMERACT 2016 in which findings were presented and discussed. The updated PsA Core Domain Set endorsed with 90% agreement by OMERACT 2016 participants included musculoskeletal disease activity, skin disease activity, fatigue, pain, patient's global assessment, physical function, health...

  9. Robust Detection and Visualization of Jet-Stream Core Lines in Atmospheric Flow.

    Science.gov (United States)

    Kern, Michael; Hewson, Tim; Sadlo, Filip; Westermann, Rudiger; Rautenhaus, Marc

    2018-01-01

    Jet-streams, their core lines and their role in atmospheric dynamics have been subject to considerable meteorological research since the first half of the twentieth century. Yet, until today no consistent automated feature detection approach has been proposed to identify jet-stream core lines from 3D wind fields. Such 3D core lines can facilitate meteorological analyses previously not possible. Although jet-stream cores can be manually analyzed by meteorologists in 2D as height ridges in the wind speed field, to the best of our knowledge no automated ridge detection approach has been applied to jet-stream core detection. In this work, we -a team of visualization scientists and meteorologists-propose a method that exploits directional information in the wind field to extract core lines in a robust and numerically less involved manner than traditional 3D ridge detection. For the first time, we apply the extracted 3D core lines to meteorological analysis, considering real-world case studies and demonstrating our method's benefits for weather forecasting and meteorological research.

  10. EFFECT OF CORE TRAINING ON SELECTED HEMATOLOGICAL VARIABLES AMONG BASKETBALL PLAYERS

    OpenAIRE

    K. Rejinadevi; Dr. C. Ramesh

    2017-01-01

    The purpose of the study was to find out the effect of core training on selected haematological variables among basketball players. For the purpose of the study forty men basketball players were selected as subjects from S.V.N College and Arul Anandar College, Madurai, Tamilnadu at random and their age ranged from 18 to 25 years. The selected subjects are divided in to two groups of twenty subjects each. Group I acted as core training group and Group II acted as control group. The experimenta...

  11. The differential effects of core stabilization exercise regime and conventional physiotherapy regime on postural control parameters during perturbation in patients with movement and control impairment chronic low back pain

    Directory of Open Access Journals (Sweden)

    Fernandes Svetlana

    2010-05-01

    Full Text Available Abstract Background The purpose of the present study was to examine the differential effect of core stability exercise training and conventional physiotherapy regime on altered postural control parameters in patients with chronic low back pain (CLBP. As heterogeneity in CLBP population moderates the effect of intervention on outcomes, in this study, interventions approaches were used based on sub-groups of CLBP. Methods This was an allocation concealed, blinded, sequential and pragmatic control trial. Three groups of participants were investigated during postural perturbations: 1 CLBP patients with movement impairment (n = 15, MI group randomized to conventional physiotherapy regime 2 fifteen CLBP patients with control impairment randomized to core stability group (CI group and 3 fifteen healthy controls (HC. Results The MI group did not show any significant changes in postural control parameters after the intervention period however they improved significantly in disability scores and fear avoidance belief questionnaire work score (P 0.8 after 8 weeks of core stability exercises for the adjusted p values. Postural control parameters of HC group were analyzed independently with pre and post postural control parameters of CI and MI group. This revealed the significant improvements in postural control parameters in CI group compared to MI group indicating the specific adaptation to the core stability exercises in CI group. Though the disability scores were reduced significantly in CI and MI groups (p Conclusions In this study core stability exercise group demonstrated significant improvements after intervention in ground reaction forces (Fz, Mz; g > 0.8 indicating changes in load transfer patterns during perturbation similar to HC group. Trial registration UTRN095032158-06012009423714

  12. The Effects of Core Stability Exercise on the Dynamic Balance of Volleyball Players

    Directory of Open Access Journals (Sweden)

    Hassan Sadeghi

    2013-12-01

    Full Text Available Dynamic balance is a key component of injury prevention and rehabilitation in sports. Training the core muscles has been hypothesized as an intervention for improving balance. However, there is a lack of current scientific evidence to support this claim. The purpose of this study was to evaluate the effects of a core stability program on dynamic balance of volleyball players as measured with the Star Excursion Balance Test (SEBT. Thirty healthy participants were divided into 2 groups: control and exercise groups. All participants performed the SEBT before and after 8-week exercise time. During the 8-week time, the exercise group performed a core stability program, whereas the control group abstained from any new exercise. These results also illustrated there was significant differences in the scores for pre-test and post-test of all direction according SEBT in the experimental group. An independent sample t-test was conducted to compare experimental and control group (F=43.573, Sig=0.000. These results were a significant difference in the scores for control and experimental groups. Maximum excursion distances improved for the exercise group, compared with the control group. This result justifies the hypothesis that core strengthening can improve dynamic postural control during landing of volleyball players significantly. Keywords: Core stabilization; volleyball player; dynamic balance; SEBT

  13. Schumpeter's core works revisited

    DEFF Research Database (Denmark)

    Andersen, Esben Sloth

    2012-01-01

    This paper organises Schumpeter’s core books in three groups: the programmatic duology,the evolutionaryeconomic duology,and the socioeconomic synthesis. By analysing these groups and their interconnections from the viewpoint of modern evolutionaryeconomics,the paper summarises resolved problems a...... and points at remaining challenges. Its analyses are based on distinctions between microevolution and macroevolution, between economic evolution and socioeconomic coevolution, and between Schumpeter’s three major evolutionary models (called Mark I, Mark II and Mark III)....

  14. Developing hybrid approaches to predict pKa values of ionizable groups

    Science.gov (United States)

    Witham, Shawn; Talley, Kemper; Wang, Lin; Zhang, Zhe; Sarkar, Subhra; Gao, Daquan; Yang, Wei

    2011-01-01

    Accurate predictions of pKa values of titratable groups require taking into account all relevant processes associated with the ionization/deionization. Frequently, however, the ionization does not involve significant structural changes and the dominating effects are purely electrostatic in origin allowing accurate predictions to be made based on the electrostatic energy difference between ionized and neutral forms alone using a static structure. On another hand, if the change of the charge state is accompanied by a structural reorganization of the target protein, then the relevant conformational changes have to be taken into account in the pKa calculations. Here we report a hybrid approach that first predicts the titratable groups, which ionization is expected to cause conformational changes, termed “problematic” residues, then applies a special protocol on them, while the rest of the pKa’s are predicted with rigid backbone approach as implemented in multi-conformation continuum electrostatics (MCCE) method. The backbone representative conformations for “problematic” groups are generated with either molecular dynamics simulations with charged and uncharged amino acid or with ab-initio local segment modeling. The corresponding ensembles are then used to calculate the pKa of the “problematic” residues and then the results are averaged. PMID:21744395

  15. Liquid-liquid reductive extraction in molten fluoride salt/liquid aluminium as a core of process for the An/Ln group separation

    International Nuclear Information System (INIS)

    Conocar, O.

    2007-06-01

    This report concerns a pyrochemical process based on liquid-liquid extraction in a molten fluoride/liquid aluminium system as a core process for actinide (An)/lanthanide (Ln) group separation, studied at CEA. The basic and demonstrative experiments have established the feasibility of the An/Ln group separation in the molten fluoride/liquid aluminium system (U, Pu, Np, Am, Cm traces from Nd, Ce, Eu, Sm, Eu, La - An/Ln separation factors over 1000 - An recovery yield over 98 % in one batch). The main experimental efforts must now be targeted on the recovery of actinides from the Al matrix. A thermodynamic and bibliographical survey has been done. It shows that back-extraction in a molten chloride melt could be a promising technique for this purpose

  16. Liquid-liquid reductive extraction in molten fluoride salt/liquid aluminium as a core of process for the An/Ln group separation

    Energy Technology Data Exchange (ETDEWEB)

    Conocar, O

    2007-06-15

    This report concerns a pyrochemical process based on liquid-liquid extraction in a molten fluoride/liquid aluminium system as a core process for actinide (An)/lanthanide (Ln) group separation, studied at CEA. The basic and demonstrative experiments have established the feasibility of the An/Ln group separation in the molten fluoride/liquid aluminium system (U, Pu, Np, Am, Cm traces from Nd, Ce, Eu, Sm, Eu, La - An/Ln separation factors over 1000 - An recovery yield over 98 % in one batch). The main experimental efforts must now be targeted on the recovery of actinides from the Al matrix. A thermodynamic and bibliographical survey has been done. It shows that back-extraction in a molten chloride melt could be a promising technique for this purpose.

  17. Core inflation indicators for Saudi Arabia

    Directory of Open Access Journals (Sweden)

    Alkhareif Ryadh M.

    2015-01-01

    Full Text Available This paper constructs and analyzes core inflation indicators for Saudi Arabia for the period of March 2012 to May 2014 using two alternative approaches: the exclusion method (ex food and housing/rent and the statistical method. The findings of the analysis suggest that the ex food and housing/ rent inflation is more volatile than the overall CPI inflation over the sample period. In contrast, the statistical core inflation is relatively more stable and less volatile. Moreover, the ex food and housing/rent inflation is only weakly correlated with headline inflation, whereas the statistical core inflation exhibits a stronger correlation. This combination of lower volatility and higher correlation with headline inflation makes the statistical method a much better choice for policymakers. From a monetary policy standpoint, using a bundle of core inflation measures, including both properly constructed exclusion and statistical methods, is more desirable, especially when variation across measures is widespread, as is the case in Saudi Arabia.

  18. Microprocessor-based integrated LMFBR core surveillance

    International Nuclear Information System (INIS)

    Gmeiner, L.

    1984-06-01

    This report results from a joint study of KfK and INTERATOM. The aim of this study is to explore the advantages of microprocessors and microelectronics for a more sophisticated core surveillance, which is based on the integration of separate surveillance techniques. Due to new developments in microelectronics and related software an approach to LMFBR core surveillance can be conceived that combines a number of measurements into a more intelligent decision-making data processing system. The following techniques are considered to contribute essentially to an integrated core surveillance system: - subassembly state and thermal hydraulics performance monitoring, - temperature noise analysis, - acoustic core surveillance, - failure characterization and failure prediction based on DND- and cover gas signals, and - flux tilting techniques. Starting from a description of these techniques it is shown that by combination and correlation of these individual techniques a higher degree of cost-effectiveness, reliability and accuracy can be achieved. (orig./GL) [de

  19. Interfacial charge separation and recombination in InP and quasi-type II InP/CdS core/shell quantum dot-molecular acceptor complexes.

    Science.gov (United States)

    Wu, Kaifeng; Song, Nianhui; Liu, Zheng; Zhu, Haiming; Rodríguez-Córdoba, William; Lian, Tianquan

    2013-08-15

    Recent studies of group II-VI colloidal semiconductor heterostuctures, such as CdSe/CdS core/shell quantum dots (QDs) or dot-in-rod nanorods, show that type II and quasi-type II band alignment can facilitate electron transfer and slow down charge recombination in QD-molecular electron acceptor complexes. To explore the general applicability of this wave function engineering approach for controlling charge transfer properties, we investigate exciton relaxation and dissociation dynamics in InP (a group III-V semiconductor) and InP/CdS core/shell (a heterostructure beween group III-V and II-VI semiconductors) QDs by transient absorption spectroscopy. We show that InP/CdS QDs exhibit a quasi-type II band alignment with the 1S electron delocalized throughout the core and shell and the 1S hole confined in the InP core. In InP-methylviologen (MV(2+)) complexes, excitons in the QD can be dissociated by ultrafast electron transfer to MV(2+) from the 1S electron level (with an average time constant of 11.4 ps) as well as 1P and higher electron levels (with a time constant of 0.39 ps), which is followed by charge recombination to regenerate the complex in its ground state (with an average time constant of 47.1 ns). In comparison, InP/CdS-MV(2+) complexes show similar ultrafast charge separation and 5-fold slower charge recombination rates, consistent with the quasi-type II band alignment in these heterostructures. This result demonstrates that wave function engineering in nanoheterostructures of group III-V and II-VI semiconductors provides a promising approach for optimizing their light harvesting and charge separation for solar energy conversion applications.

  20. Effects of Pelvic and Core Strength Training on High School Cross-Country Race Times.

    Science.gov (United States)

    Clark, Anne W; Goedeke, Maggie K; Cunningham, Saengchoy R; Rockwell, Derek E; Lehecka, Bryan J; Manske, Robert C; Smith, Barbara S

    2017-08-01

    Clark, AW, Goedeke, MK, Cunningham, SR, Rockwell, DE, Lehecka, BJ, Manske, RC, and Smith, BS. Effects of pelvic and core strength training on high school cross-country race times. J Strength Cond Res 31(8): 2289-2295, 2017-There is only limited research examining the effect of pelvic and core strength training on running performance. Pelvic and core muscle fatigue is believed to contribute to excess motion along frontal and transverse planes which decreases efficiency in normal sagittal plane running motions. The purpose of this study was to determine whether adding a 6-week pelvic and core strengthening program resulted in decreased race times in high school cross-country runners. Thirty-five high school cross-country runners (14-19 years old) from 2 high schools were randomly assigned to a strengthening group (experimental) or a nonstrengthening group (control). All participants completed 4 standardized isometric strength tests for hip abductors, adductors, extensors, and core musculature in a test-retest design. The experimental group performed a 6-week pelvic and core strengthening program along with their normal training. Participants in the control group performed their normal training without additional pelvic and core strengthening. Baseline, 3-week, and 6-week race times were collected using a repeated measures design. No significant interaction between experimental and control groups regarding decreasing race times and increasing pelvic and core musculature strength occurred over the 6-week study period. Both groups increased strength and decreased overall race times. Clinically significant findings reveal a 6-week pelvic and core stability strengthening program 3 times a week in addition to coach led team training may help decrease race times.

  1. JOYO MK-II core characteristics database

    International Nuclear Information System (INIS)

    Ohkawachi, Yasushi; Maeda, Shigetaka; Sekine, Takashi; Aoyama, Takafumi

    2003-04-01

    The 'JOYO' MK-II core characteristics database was compiled and published in 1998. Comments and requests from many users led to the creation of a revised edition. The revisions include changes to the MAGI calculation code system to use the 70 group JFS-3-J3.2 constant set processed from the JENDL-3.2 library. Total control rod worth, reactor kinetic parameters and the MK-II core performance test results were included per user's requests. The core characteristics obtained from the 32 nd to 35 th operational cycles, which were conducted in the MK-III transition core, were newly added in this revised version. The MK-II core management data and core characteristics data were recorded to CD-ROM for user convenience. The Configuration Data' include the core arrangement and refueling record for each operational cycle. The 'Subassembly Library Data' include the atomic number density, neutron fluence, burn-up, integral power of 362 driver fuel subassemblies and 69 irradiation test subassemblies. The 'Output Data' contain the calculated neutron flux, gamma flux, power density, linear heat rate, coolant and fuel temperature distribution of all the fuel subassemblies at the beginning and end of each operational cycle. The 'Core Characteristics Data' include the measured excess reactivity, control rod worth calibration curve, and reactivity coefficients of temperature, power and burn-up. (author)

  2. Overview of on-line core monitoring system BEACON

    International Nuclear Information System (INIS)

    Dai Qing; Chen Xiaosong

    2013-01-01

    After more than 20 years of development, key technologies embedded with such system have reached a certain degree of maturity among some foreign countries. However, domestically, there is no comparable system yet. Through in-depth research and analysis on the most widely used core monitoring system in the world, BEACON, it's hope that this will provide guidance on our independent development of the first core monitoring system in China. Excore detectors, core outlet thermocouples and incore movable detectors are used to provide measure data on the status of the core for BEACON. Under the assumption of nodal homogeneity, an effective fast group model is used to solve the diffusion equation, followed by core-wise interpolation by Green's function. Finally, reconstruction of a calculated core is fitted with measured data using the surface spline function. The most significant technological advances are core monitoring during unstable core conditions, the use of nodal expansion method to improve accuracy and the adoption of single point calibration to increase the period of recalibration for the whole core. (authors)

  3. Automated Integration of Dedicated Hardwired IP Cores in Heterogeneous MPSoCs Designed with ESPAM

    Directory of Open Access Journals (Sweden)

    Ed Deprettere

    2008-06-01

    Full Text Available This paper presents a methodology and techniques for automated integration of dedicated hardwired (HW IP cores into heterogeneous multiprocessor systems. We propose an IP core integration approach based on an HW module generation that consists of a wrapper around a predefined IP core. This approach has been implemented in a tool called ESPAM for automated multiprocessor system design, programming, and implementation. In order to keep high performance of the integrated IP cores, the structure of the IP core wrapper is devised in a way that adequately represents and efficiently implements the main characteristics of the formal model of computation, namely, Kahn process networks, we use as an underlying programming model in ESPAM. We present details about the structure of the HW module, the supported types of IP cores, and the minimum interfaces these IP cores have to provide in order to allow automated integration in heterogeneous multiprocessor systems generated by ESPAM. The ESPAM design flow, the multiprocessor platforms we consider, and the underlying programming (KPN model are introduced as well. Furthermore, we present the efficiency of our approach by applying our methodology and ESPAM tool to automatically generate, implement, and program heterogeneous multiprocessor systems that integrate dedicated IP cores and execute real-life applications.

  4. Cylindrization of a PWR core for neutronic calculations

    International Nuclear Information System (INIS)

    Santos, Rubens Souza dos

    2005-01-01

    In this work we propose a core cylindrization, starting from a PWR core configuration, through the use of an algorithm that becomes the process automated in the program, independent of the discretization. This approach overcomes the problem stemmed from the use of the neutron transport theory on the core boundary, in addition with the singularities associated with the presence of corners on the outer fuel element core of, existents in the light water reactors (LWR). The algorithm was implemented in a computational program used to identification of the control rod drop accident in a typical PWR core. The results showed that the algorithm presented consistent results comparing with an production code, for a problem with uniform properties. In our conclusions, we suggest, for future works, for analyzing the effect on mesh sizes for the Cylindrical geometry, and to compare the transport theory calculations versus diffusion theory, for the boundary conditions with corners, for typical PWR cores. (author)

  5. How to make friends: A logical approach to social group creation

    NARCIS (Netherlands)

    Smets, S.; Velázquez-Quesada, F.R.; Baltag, A.; Seligman, J.; Yamada, T.

    2017-01-01

    This paper studies the logical features of social group creation. We focus on the mechanisms which indicate when agents can form a team based on the correspondence in their set of features (behavior, opinions, etc.). Our basic approach uses a semi-metric on the set of agents, which is used to

  6. CopperCore, an Open Source IMS Learning Design Engine

    NARCIS (Netherlands)

    Vogten, Hubert

    2004-01-01

    The presentation gives an overview of the approach of the development programme of the OTEC department towards the development of Open Source. The CopperCore IMS Learning Design engine is described as an example of this approach.

  7. A GROUP INTERVENTION PROGRAMME FOR ADULT SURVIVORS OF CHILDHOOD SEXUAL ABUSE

    Directory of Open Access Journals (Sweden)

    Fouché, Ansie

    2016-10-01

    Full Text Available This study reports on the core components of the Survivor to Thriver strengths-based group intervention programme for women who experienced childhood sexual abuse. It advocates a balanced approach and draws on an eclectic mix of theories, and has been field tested with two groups of women. An exposition of the philosophical and theoretical underpinnings, a description of the context, the role of the expert companion, outcomes and activities of the programme, evaluation methods and standard of care is provided. Finally, critical reflections on the intervention are discussed as well as limitations and the way forward.

  8. Methodology for thermal hydraulic conceptual design and performance analysis of KALIMER core

    International Nuclear Information System (INIS)

    Young-Gyun Kim; Won-Seok Kim; Young-Jin Kim; Chang-Kue Park

    2000-01-01

    This paper summarizes the methodology for thermal hydraulic conceptual design and performance analysis which is used for KALIMER core, especially the preliminary methodology for flow grouping and peak pin temperature calculation in detail. And the major technical results of the conceptual design for the KALIMER 98.03 core was shown and compared with those of KALIMER 97.07 design core. The KALIMER 98.03 design core is proved to be more optimized compared to the 97.07 design core. The number of flow groups are reduced from 16 to 11, and the equalized peak cladding midwall temperature from 654 deg. C to 628 deg. C. It was achieved from the nuclear and thermal hydraulic design optimization study, i.e. core power flattening and increase of radial blanket power fraction. Coolant flow distribution to the assemblies and core coolant/component temperatures should be determined in core thermal hydraulic analysis. Sodium flow is distributed to core assemblies with the overall goal of equalizing the peak cladding midwall temperatures for the peak temperature pin of each bundle, thus pin cladding damage accumulation and pin reliability. The flow grouping and the peak pin temperature calculation for the preliminary conceptual design is performed with the modules ORFCE-F60 and ORFCE-T60 respectively. The basic subchannel analysis will be performed with the SLTHEN code, and the detailed subchannel analysis will be done with the MATRA-LMR code which is under development for the K-Core system. This methodology was proved practical to KALIMER core thermal hydraulic design from the related benchmark calculation studies, and it is used to KALIMER core thermal hydraulic conceptual design. (author)

  9. Tattoos, body piercings, and self-injury: is there a connection? Investigations on a core group of participants practicing body modification.

    Science.gov (United States)

    Stirn, Aglaja; Hinz, Andreas

    2008-05-01

    Reliable psychosocial data about practitioners of body piercing and tattooing are few and controversial. The goal of this study was to reinvestigate the issue by studying a large sample of individuals with body modifications (BMs), focusing on the motives and relations to biographical events. A 55-item anonymous self-report questionnaire was distributed among volunteers of what is considered to be a core group of individuals wearing BMs (N=432). Results show that BMs changed the participants' attitude toward their body considerably, and 34% of all participants reported BM practices in conjunction with decisive biographical events. Twenty-seven percent of the participants admitted self-cutting during childhood. This group differed from the group without self-cutting with respect to several features before, during, and after BM. The rate of medical complications of BM was 16% in the total sample, with a remarkably higher rate (26%) among participants with a history of self-cutting. The data suggest that the significance of BMs ranges from simple peer group imitations to highly informative symptoms of possibly severe psychopathological conditions. In the latter case, BMs sometimes serve as therapeutic substitutes.

  10. Consensus clustering approach to group brain connectivity matrices

    Directory of Open Access Journals (Sweden)

    Javier Rasero

    2017-10-01

    Full Text Available A novel approach rooted on the notion of consensus clustering, a strategy developed for community detection in complex networks, is proposed to cope with the heterogeneity that characterizes connectivity matrices in health and disease. The method can be summarized as follows: (a define, for each node, a distance matrix for the set of subjects by comparing the connectivity pattern of that node in all pairs of subjects; (b cluster the distance matrix for each node; (c build the consensus network from the corresponding partitions; and (d extract groups of subjects by finding the communities of the consensus network thus obtained. Different from the previous implementations of consensus clustering, we thus propose to use the consensus strategy to combine the information arising from the connectivity patterns of each node. The proposed approach may be seen either as an exploratory technique or as an unsupervised pretraining step to help the subsequent construction of a supervised classifier. Applications on a toy model and two real datasets show the effectiveness of the proposed methodology, which represents heterogeneity of a set of subjects in terms of a weighted network, the consensus matrix.

  11. An automated approach for annual layer counting in ice cores

    Directory of Open Access Journals (Sweden)

    M. Winstrup

    2012-11-01

    Full Text Available A novel method for automated annual layer counting in seasonally-resolved paleoclimate records has been developed. It relies on algorithms from the statistical framework of hidden Markov models (HMMs, which originally was developed for use in machine speech recognition. The strength of the layer detection algorithm lies in the way it is able to imitate the manual procedures for annual layer counting, while being based on statistical criteria for annual layer identification. The most likely positions of multiple layer boundaries in a section of ice core data are determined simultaneously, and a probabilistic uncertainty estimate of the resulting layer count is provided, ensuring an objective treatment of ambiguous layers in the data. Furthermore, multiple data series can be incorporated and used simultaneously. In this study, the automated layer counting algorithm has been applied to two ice core records from Greenland: one displaying a distinct annual signal and one which is more challenging. The algorithm shows high skill in reproducing the results from manual layer counts, and the resulting timescale compares well to absolute-dated volcanic marker horizons where these exist.

  12. BLIG: A New Approach for Sensor Identification, Grouping,and Authorisation in Body Sensor Networks

    DEFF Research Database (Denmark)

    Andersen, Jacob; Bardram, Jakob Eyvind

    2007-01-01

    Using body sensor networks (BSN) in critical clinical settings like emergency units in hospitals or in accidents requires that such a network can be deployed, configured, and started in a fast and easy way, while maintaining trust in the network. In this paper we present a novel approach called...... BLIG (Blinking Led Indicated Grouping) for easy deployment of BSNs on patients in critical situations, including mechanisms for uniquely identifying and grouping sensor nodes belonging to a patient in a secure and trusted way. This approach has been designed in close cooperation with users, and easy...

  13. The calculation of the MEU-HEU coupled core in the KUCA

    International Nuclear Information System (INIS)

    Hayashi, M.; Shiroya, S.; Kanda, K.; Shibata, T.

    1984-01-01

    The KUCA has a plan for critical experiments of the MEU-HEU coupled core in 1984. The neutronics calculation has been performed for the MEU-HEU coupled core in the KUCA. The GGC-4 and THERMOS were used to generate the four-group constants and the 2D-FEM-KUR, based on the finite-element method, was used for the diffusion calculation. The calculations with four-group constants agreed with experiments within 1.8% for the both single-cores with the MEU and the HEU. (author)

  14. Core Values in Nursing Care Based on the Experiences of Nurses Engaged in Neonatal Nursing: A Text-mining Approach for Analyzing Reflection Records

    Science.gov (United States)

    Watanabe, Hiromi; Okuda, Reiko; Hagino, Hiroshi

    2018-01-01

    Background Strong feelings about and enthusiasm for nursing care are reflected in nurses’ thoughts and behaviors in clinical practice and affect their profession. This study was conducted to identify the characteristics of core values in nursing care based on the experiences of nurses engaged in neonatal nursing through a process for recognizing the conceptualization of nursing. Methods We conceptualized nursing care in 43 nurses who were involved in neonatal nursing using a reflection sheet. We classified descriptions on a sheet based on the Three-Staged Recognition scheme and analyzed them using a text-mining approach. Results Nurses involved in neonatal nursing recognized that they must take care of the “child,” “mother,” and “family.” Important elements of nursing in nurses with less than 5 years versus 5 or more years of neonatal nursing experience were classified into seven clusters, respectively. These elements were mainly related to family members in both groups. In nurses with less than 5 years of experience, four clusters of one-way communication by nurses were observed in the analysis of the key elements in nursing. On the other hand, five clusters of mutual relationships between patients, their family members, and nurses were observed in nurses with 5 or more years of experience. Conclusion In conclusion, the core value of nurses engaged in neonatal nursing is family-oriented nursing. Nurses with 5 or more years of neonatal nursing experience understand patients and their family members well through establishing relationships and providing comfort and safety while taking care of them. PMID:29599621

  15. Group theory approach to scattering

    International Nuclear Information System (INIS)

    Wu, J.

    1985-01-01

    For certain physical systems, there exists a dynamical group which contains the operators connecting states with the same energy but belonging to potentials with different strengths. This group is called the potential group of that system. The SO(2,1) potential groups structure is introduced to describe physical systems with mixed spectra, such as Morse and Poeschl-teller potentials. The discrete spectrum describes bound states and the continuous spectrum describes bound states and the continuous spectrum describes scattering states. A solvable class of one-dimensional potentials given by Natanzon belongs to this structure with an SO(2,2) potential group. The potential group structure provides us with an algebraic procedure generating the recursion relations for the scattering matrix, which can be formulated in a purely algebraic fashion, divorced from any differential realization. This procedure, when applied to the three-dimensional scattering problem with SO(3,1) symmetry, generates the scattering matrix of the Coulomb problem. Preliminary phenomenological models for elastic scattering in a heavy-ion collision are constructed on the basis. The results obtained here can be regarded as an important extension of the group theory techniques to scattering problems similar to that developed for bound state problems

  16. Power distribution investigation in the transition phase of the low moderation type MOX fueled LWR from the high conversion core to the breeding core

    International Nuclear Information System (INIS)

    Akie, Hiroshi; Nakano, Yoshihiro; Okubo, Tsutomu

    2011-01-01

    The key concept of Innovative Water Reactor for Flexible Fuel Cycle (FLWR) is a core transition from a high conversion (HC) type to a plutonium breeding (BR) type in a same reactor system only by replacing fuel assemblies. Consequently in this transition phase, there are two types of assemblies in the same core. Due to the differences of the two assembly types, region-wise soft to hard neutron spectra appears and result in a large power peaking. Therefore, power distribution of FLWR in the HC to BR transition phase was studied by performing assembly and core calculations. For the whole core calculation, a new 14-group energy structure is developed to better represent the power distribution obtained with the fine 107-group structure than the 9-group structure in the previous evaluations. Calculations on few assemblies geometries show large local power peakings can be effectively reduced by considering plutonium enrichment distribution in an assembly. In the whole core calculation, there is a power level mismatch between HC and BR assemblies, but overall power distribution flattening is possible by optimizing fuel assemblies loading. Although the fuel loading should be decided also taking into account the void coefficient, transition from HC to BR type FLWR seems feasible without difficulty. (author)

  17. Physical Layer Multi-Core Prototyping A Dataflow-Based Approach for LTE eNodeB

    CERN Document Server

    Pelcat, Maxime; Piat, Jonathan; Nezan, Jean-François

    2013-01-01

    Base stations developed according to the 3GPP Long Term Evolution (LTE) standard require unprecedented processing power. 3GPP LTE enables data rates beyond hundreds of Mbits/s by using advanced technologies, necessitating a highly complex LTE physical layer. The operating power of base stations is a significant cost for operators, and is currently optimized using state-of-the-art hardware solutions, such as heterogeneous distributed systems. The traditional system design method of porting algorithms to heterogeneous distributed systems based on test-and-refine methods is a manual, thus time-expensive, task.   Physical Layer Multi-Core Prototyping: A Dataflow-Based Approach for LTE eNodeB provides a clear introduction to the 3GPP LTE physical layer and to dataflow-based prototyping and programming. The difficulties in the process of 3GPP LTE physical layer porting are outlined, with particular focus on automatic partitioning and scheduling, load balancing and computation latency reduction, specifically in sys...

  18. When is success not satisfying? Integrating regulatory focus and approach/avoidance motivation theories to explain the relation between core self-evaluation and job satisfaction.

    Science.gov (United States)

    Ferris, D Lance; Johnson, Russell E; Rosen, Christopher C; Djurdjevic, Emilija; Chang, Chu-Hsiang Daisy; Tan, James A

    2013-03-01

    Integrating implications from regulatory focus and approach/avoidance motivation theories, we present a framework wherein motivational orientations toward positive (approach motivation orientation) or negative (avoidance motivation orientation) stimuli interact with workplace success to mediate the relation of core self-evaluation (CSE) with job satisfaction. Using data collected from supervisor-subordinate dyads (Sample 1) and time-lagged data (Sample 2), we found that the results from two studies indicated that the interaction of workplace success and avoidance motivation orientation mediated relations of CSE with job satisfaction. Although approach motivation orientation did not interact with workplace success, it did mediate the CSE-job satisfaction relation on its own. Implications for the CSE and approach/avoidance literatures are discussed.

  19. Multi-core processing and scheduling performance in CMS

    International Nuclear Information System (INIS)

    Hernández, J M; Evans, D; Foulkes, S

    2012-01-01

    Commodity hardware is going many-core. We might soon not be able to satisfy the job memory needs per core in the current single-core processing model in High Energy Physics. In addition, an ever increasing number of independent and incoherent jobs running on the same physical hardware not sharing resources might significantly affect processing performance. It will be essential to effectively utilize the multi-core architecture. CMS has incorporated support for multi-core processing in the event processing framework and the workload management system. Multi-core processing jobs share common data in memory, such us the code libraries, detector geometry and conditions data, resulting in a much lower memory usage than standard single-core independent jobs. Exploiting this new processing model requires a new model in computing resource allocation, departing from the standard single-core allocation for a job. The experiment job management system needs to have control over a larger quantum of resource since multi-core aware jobs require the scheduling of multiples cores simultaneously. CMS is exploring the approach of using whole nodes as unit in the workload management system where all cores of a node are allocated to a multi-core job. Whole-node scheduling allows for optimization of the data/workflow management (e.g. I/O caching, local merging) but efficient utilization of all scheduled cores is challenging. Dedicated whole-node queues have been setup at all Tier-1 centers for exploring multi-core processing workflows in CMS. We present the evaluation of the performance scheduling and executing multi-core workflows in whole-node queues compared to the standard single-core processing workflows.

  20. Bose-Einstein condensate & degenerate Fermi cored dark matter halos

    Science.gov (United States)

    Chung, W.-J.; Nelson, L. A.

    2018-06-01

    There has been considerable interest in the last several years in support of the idea that galaxies and clusters could have highly condensed cores of dark matter (DM) within their central regions. In particular, it has been suggested that dark matter could form Bose-Einstein condensates (BECs) or degenerate Fermi cores. We examine these possibilities under the assumption that the core consists of highly condensed DM (either bosons or fermions) that is embedded in a diffuse envelope (e.g., isothermal sphere). The novelty of our approach is that we invoke composite polytropes to model spherical collisionless structures in a way that is physically intuitive and can be generalized to include other equations of state (EOSs). Our model is very amenable to the analysis of BEC cores (composed of ultra-light bosons) that have been proposed to resolve small-scale CDM anomalies. We show that the analysis can readily be applied to bosons with or without small repulsive self-interactions. With respect to degenerate Fermi cores, we confirm that fermionic particle masses between 1—1000 keV are not excluded by the observations. Finally, we note that this approach can be extended to include a wide range of EOSs in addition to multi-component collisionless systems.

  1. Magneto-Sensitive Adsorbents Modified by Functional Nitrogen-Containing Groups

    Science.gov (United States)

    Melnyk, Inna V.; Gdula, Karolina; Dąbrowski, Andrzej; Zub, Yuriy L.

    2016-02-01

    In order to obtain amino-functionalized silica materials with magnetic core, one-step synthesis was carried out. Several materials, differ in number and structure of amino groups, were synthesized on the basis of sol-gel method. The synthesized materials were examined by several analytical techniques. The presence and content of amino groups were measured by using Diffuse Reflectance Infrared Fourier Transform (DRIFT) spectroscopy and acid-base titration, respectively. Specific surface areas were measured by nitrogen/adsorption desorption isotherms. It was proved that sol-gel approach leads to obtain materials with high content of amino groups built into their surfaces (in the range 1.6-2.7 mmol/g). As-obtained materials were tested as potential adsorbents for copper(II) ions. The received maximum adsorption capacities were in the range 0.4-0.7 mmol/g.

  2. BioCore Guide: A Tool for Interpreting the Core Concepts of Vision and Change for Biology Majors

    Science.gov (United States)

    Freeman, Scott; Wenderoth, Mary Pat; Crowe, Alison J.

    2014-01-01

    Vision and Change in Undergraduate Biology Education outlined five core concepts intended to guide undergraduate biology education: 1) evolution; 2) structure and function; 3) information flow, exchange, and storage; 4) pathways and transformations of energy and matter; and 5) systems. We have taken these general recommendations and created a Vision and Change BioCore Guide—a set of general principles and specific statements that expand upon the core concepts, creating a framework that biology departments can use to align with the goals of Vision and Change. We used a grassroots approach to generate the BioCore Guide, beginning with faculty ideas as the basis for an iterative process that incorporated feedback from more than 240 biologists and biology educators at a diverse range of academic institutions throughout the United States. The final validation step in this process demonstrated strong national consensus, with more than 90% of respondents agreeing with the importance and scientific accuracy of the statements. It is our hope that the BioCore Guide will serve as an agent of change for biology departments as we move toward transforming undergraduate biology education. PMID:26086653

  3. RNA localization in Xenopus oocytes uses a core group of trans-acting factors irrespective of destination.

    Science.gov (United States)

    Snedden, Donald D; Bertke, Michelle M; Vernon, Dominic; Huber, Paul W

    2013-07-01

    The 3' untranslated region of mRNA encoding PHAX, a phosphoprotein required for nuclear export of U-type snRNAs, contains cis-acting sequence motifs E2 and VM1 that are required for localization of RNAs to the vegetal hemisphere of Xenopus oocytes. However, we have found that PHAX mRNA is transported to the opposite, animal, hemisphere. A set of proteins that cross-link to the localization elements of vegetally localized RNAs are also cross-linked to PHAX and An1 mRNAs, demonstrating that the composition of RNP complexes that form on these localization elements is highly conserved irrespective of the final destination of the RNA. The ability of RNAs to bind this core group of proteins is correlated with localization activity. Staufen1, which binds to Vg1 and VegT mRNAs, is not associated with RNAs localized to the animal hemisphere and may determine, at least in part, the direction of RNA movement in Xenopus oocytes.

  4. Core Hunter 3: flexible core subset selection.

    Science.gov (United States)

    De Beukelaer, Herman; Davenport, Guy F; Fack, Veerle

    2018-05-31

    Core collections provide genebank curators and plant breeders a way to reduce size of their collections and populations, while minimizing impact on genetic diversity and allele frequency. Many methods have been proposed to generate core collections, often using distance metrics to quantify the similarity of two accessions, based on genetic marker data or phenotypic traits. Core Hunter is a multi-purpose core subset selection tool that uses local search algorithms to generate subsets relying on one or more metrics, including several distance metrics and allelic richness. In version 3 of Core Hunter (CH3) we have incorporated two new, improved methods for summarizing distances to quantify diversity or representativeness of the core collection. A comparison of CH3 and Core Hunter 2 (CH2) showed that these new metrics can be effectively optimized with less complex algorithms, as compared to those used in CH2. CH3 is more effective at maximizing the improved diversity metric than CH2, still ensures a high average and minimum distance, and is faster for large datasets. Using CH3, a simple stochastic hill-climber is able to find highly diverse core collections, and the more advanced parallel tempering algorithm further increases the quality of the core and further reduces variability across independent samples. We also evaluate the ability of CH3 to simultaneously maximize diversity, and either representativeness or allelic richness, and compare the results with those of the GDOpt and SimEli methods. CH3 can sample equally representative cores as GDOpt, which was specifically designed for this purpose, and is able to construct cores that are simultaneously more diverse, and either are more representative or have higher allelic richness, than those obtained by SimEli. In version 3, Core Hunter has been updated to include two new core subset selection metrics that construct cores for representativeness or diversity, with improved performance. It combines and outperforms the

  5. Vver-1000 Mox core computational benchmark

    International Nuclear Information System (INIS)

    2006-01-01

    The NEA Nuclear Science Committee has established an Expert Group that deals with the status and trends of reactor physics, fuel performance and fuel cycle issues related to disposing of weapons-grade plutonium in mixed-oxide fuel. The objectives of the group are to provide NEA member countries with up-to-date information on, and to develop consensus regarding, core and fuel cycle issues associated with burning weapons-grade plutonium in thermal water reactors (PWR, BWR, VVER-1000, CANDU) and fast reactors (BN-600). These issues concern core physics, fuel performance and reliability, and the capability and flexibility of thermal water reactors and fast reactors to dispose of weapons-grade plutonium in standard fuel cycles. The activities of the NEA Expert Group on Reactor-based Plutonium Disposition are carried out in close co-operation (jointly, in most cases) with the NEA Working Party on Scientific Issues in Reactor Systems (WPRS). A prominent part of these activities include benchmark studies. At the time of preparation of this report, the following benchmarks were completed or in progress: VENUS-2 MOX Core Benchmarks: carried out jointly with the WPRS (formerly the WPPR) (completed); VVER-1000 LEU and MOX Benchmark (completed); KRITZ-2 Benchmarks: carried out jointly with the WPRS (formerly the WPPR) (completed); Hollow and Solid MOX Fuel Behaviour Benchmark (completed); PRIMO MOX Fuel Performance Benchmark (ongoing); VENUS-2 MOX-fuelled Reactor Dosimetry Calculation (ongoing); VVER-1000 In-core Self-powered Neutron Detector Calculational Benchmark (started); MOX Fuel Rod Behaviour in Fast Power Pulse Conditions (started); Benchmark on the VENUS Plutonium Recycling Experiments Configuration 7 (started). This report describes the detailed results of the benchmark investigating the physics of a whole VVER-1000 reactor core using two-thirds low-enriched uranium (LEU) and one-third MOX fuel. It contributes to the computer code certification process and to the

  6. Essential Distinctiveness: Strategic Alternatives in Updating the Business Core Curriculum

    Science.gov (United States)

    Alstete, Jeffrey W.

    2013-01-01

    Purpose: This paper seeks to propose the use of specific strategic management tools for identifying opportunities for gaining competitive advantage in the business core curricula offered at colleges and universities. Design/methodology/approach: A brief review of the literature on business core curriculum innovation and change is examined, and…

  7. In core-fuel management in approach to equilibrium of WWER-440 reactor; Prelazni rezim iskoriscenja goriva u nuklearnom reaktoru tipa VVER-440

    Energy Technology Data Exchange (ETDEWEB)

    Marinkovic, N [Boris Kidric Institute of nuclear sciences, Vinca, Belgrade (Yugoslavia)

    1978-07-01

    For the need of in core fuel management and prediction of fuel cycle costs as well as operating of a nuclear power plant behaviour of main physical parameters and refueling scheme during approach to equilibrium operation are indispensable. An estimation of a refueling scheme during forst six years of exploitation for a commercially proven PWR reactor of WWER-440 type is shown in this paper. (author)

  8. LAMBDA-hyperon superfluidity in neutron star cores

    CERN Document Server

    Takatsuka, T

    2000-01-01

    Superfluidity of LAMBDA hyperons in neutron star cores is investigated by a realistic approach to use reliable LAMBDA LAMBDA interactions and the effective mass of LAMBDA based on the G-matrix calculations. It is found that LAMBDA superfluid can exist at rho approx = (rho sub t approx rho sub d) with rho sub t approx = 2 rho sub 0 (rho sub 0 being the nuclear density) and rho sub d approx = (3 - 4.5)rho sub 0 , depending on hyperon core models.

  9. Core Stabilization Exercise Prescription, Part 2

    OpenAIRE

    Brumitt, Jason; Matheson, J. W.; Meira, Erik P.

    2013-01-01

    Context Therapeutic exercises are frequently prescribed to patients with low back pain. Numerous exercise programs for patients with low back pain have been described. Many of these treatment programs are based on 1 of 2 popular rehabilitation strategies: a motor control exercise approach or a general exercise approach. Data Sources PubMed clinical queries from 1966 to March 2013 for keyword combinations including motor control exercise, core stability exercise, therapeutic exercise, general ...

  10. Group decision-making approach for flood vulnerability identification using the fuzzy VIKOR method

    Science.gov (United States)

    Lee, G.; Jun, K. S.; Chung, E.-S.

    2015-04-01

    This study proposes an improved group decision making (GDM) framework that combines the VIKOR method with data fuzzification to quantify the spatial flood vulnerability including multiple criteria. In general, GDM method is an effective tool for formulating a compromise solution that involves various decision makers since various stakeholders may have different perspectives on their flood risk/vulnerability management responses. The GDM approach is designed to achieve consensus building that reflects the viewpoints of each participant. The fuzzy VIKOR method was developed to solve multi-criteria decision making (MCDM) problems with conflicting and noncommensurable criteria. This comprising method can be used to obtain a nearly ideal solution according to all established criteria. This approach effectively can propose some compromising decisions by combining the GDM method and fuzzy VIKOR method. The spatial flood vulnerability of the southern Han River using the GDM approach combined with the fuzzy VIKOR method was compared with the spatial flood vulnerability using general MCDM methods, such as the fuzzy TOPSIS and classical GDM methods (i.e., Borda, Condorcet, and Copeland). As a result, the proposed fuzzy GDM approach can reduce the uncertainty in the data confidence and weight derivation techniques. Thus, the combination of the GDM approach with the fuzzy VIKOR method can provide robust prioritization because it actively reflects the opinions of various groups and considers uncertainty in the input data.

  11. NutriLive: An Integrated Nutritional Approach as a Sustainable Tool to Prevent Malnutrition in Older People and Promote Active and Healthy Ageing—The EIP-AHA Nutrition Action Group

    Directory of Open Access Journals (Sweden)

    Maddalena Illario

    2016-01-01

    Full Text Available The present document describes a nutritional approach that is nested in the European Innovation Partnership for Active and Healthy Aging (EIP-AHA and aims to provide the first common European program translating an integrated approach to nutritional frailty in terms of a multidimensional and transnational methodology. The document has been developed by the A3 Nutrition Action Area of the EIP-AHA and aims at providing a stepwise approach to malnutrition in older citizens, identifying adequate interventions based on a unified assessment and ICT-supported solutions. “NutriLive” is an integrated nutritional approach, represented by a structured Screening-Assessment-Monitoring-Action-Pyramid-Model (SAM-AP. Its core concept is the stratification of the nutritional needs, considered by the working group as the key for targeted, effective, and sustainable interventions. “NutriLive” tries to close gaps in epidemiological data within an aging population, creating a unified language to deal with the topic of nutrition and malnutrition in Europe. By assembling all the validated screening, assessment, and monitoring tools on malnutrition in a first pyramid, which is interrelated to a second intervention pyramid, the A3 Nutrition WG identifies a common, integrated vision on the nutritional approach to frailty, which applies to the various health care settings.

  12. Optimization method development of the core characteristics of a fast reactor in order to explore possible high performance solutions (a solution being a consistent set of fuel, core, system and safety)

    International Nuclear Information System (INIS)

    Ingremeau, J.-J.X.

    2011-01-01

    In the study of any new nuclear reactor, the design of the core is an important step. However designing and optimising a reactor core is quite complex as it involves neutronics, thermal-hydraulics and fuel thermomechanics and usually design of such a system is achieved through an iterative process, involving several different disciplines. In order to solve quickly such a multi-disciplinary system, while observing the appropriate constraints, a new approach has been developed to optimise both the core performance (in-cycle Pu inventory, fuel burn-up, etc...) and the core safety characteristics (safety estimators) of a Fast Neutron Reactor. This new approach, called FARM (Fast Reactor Methodology) uses analytical models and interpolations (Meta-models) from CEA reference codes for neutronics, thermal-hydraulics and fuel behaviour, which are coupled to automatically design a core based on several optimization variables. This global core model is then linked to a genetic algorithm and used to explore and optimise new core designs with improved performance. Consideration has also been given to which parameters can be best used to define the core performance and how safety can be taken into account.This new approach has been used to optimize the design of three concepts of Gas cooled Fast Reactor (GFR). For the first one, using a SiC/SiCf-cladded carbide-fuelled helium-bonded pin, the results demonstrate that the CEA reference core obtained with the traditional iterative method was an optimal core, but among many other possibilities (that is to say on the Pareto front). The optimization also found several other cores which exhibit some improved features at the expense of other safety or performance estimators. An evolution of this concept using a 'buffer', a new technology being developed at CEA, has hence been introduced in FARM. The FARM optimisation produced several core designs using this technology, and estimated their performance. The results obtained show that

  13. Integral Full Core Multi-Physics PWR Benchmark with Measured Data

    Energy Technology Data Exchange (ETDEWEB)

    Forget, Benoit; Smith, Kord; Kumar, Shikhar; Rathbun, Miriam; Liang, Jingang

    2018-04-11

    In recent years, the importance of modeling and simulation has been highlighted extensively in the DOE research portfolio with concrete examples in nuclear engineering with the CASL and NEAMS programs. These research efforts and similar efforts worldwide aim at the development of high-fidelity multi-physics analysis tools for the simulation of current and next-generation nuclear power reactors. Like all analysis tools, verification and validation is essential to guarantee proper functioning of the software and methods employed. The current approach relies mainly on the validation of single physic phenomena (e.g. critical experiment, flow loops, etc.) and there is a lack of relevant multiphysics benchmark measurements that are necessary to validate high-fidelity methods being developed today. This work introduces a new multi-cycle full-core Pressurized Water Reactor (PWR) depletion benchmark based on two operational cycles of a commercial nuclear power plant that provides a detailed description of fuel assemblies, burnable absorbers, in-core fission detectors, core loading and re-loading patterns. This benchmark enables analysts to develop extremely detailed reactor core models that can be used for testing and validation of coupled neutron transport, thermal-hydraulics, and fuel isotopic depletion. The benchmark also provides measured reactor data for Hot Zero Power (HZP) physics tests, boron letdown curves, and three-dimensional in-core flux maps from 58 instrumented assemblies. The benchmark description is now available online and has been used by many groups. However, much work remains to be done on the quantification of uncertainties and modeling sensitivities. This work aims to address these deficiencies and make this benchmark a true non-proprietary international benchmark for the validation of high-fidelity tools. This report details the BEAVRS uncertainty quantification for the first two cycle of operations and serves as the final report of the project.

  14. Nonlinear relativistic plasma resonance: Renormalization group approach

    Energy Technology Data Exchange (ETDEWEB)

    Metelskii, I. I., E-mail: metelski@lebedev.ru [Russian Academy of Sciences, Lebedev Physical Institute (Russian Federation); Kovalev, V. F., E-mail: vfkvvfkv@gmail.com [Dukhov All-Russian Research Institute of Automatics (Russian Federation); Bychenkov, V. Yu., E-mail: bychenk@lebedev.ru [Russian Academy of Sciences, Lebedev Physical Institute (Russian Federation)

    2017-02-15

    An analytical solution to the nonlinear set of equations describing the electron dynamics and electric field structure in the vicinity of the critical density in a nonuniform plasma is constructed using the renormalization group approach with allowance for relativistic effects of electron motion. It is demonstrated that the obtained solution describes two regimes of plasma oscillations in the vicinity of the plasma resonance— stationary and nonstationary. For the stationary regime, the spatiotemporal and spectral characteristics of the resonantly enhanced electric field are investigated in detail and the effect of the relativistic nonlinearity on the spatial localization of the energy of the plasma relativistic field is considered. The applicability limits of the obtained solution, which are determined by the conditions of plasma wave breaking in the vicinity of the resonance, are established and analyzed in detail for typical laser and plasma parameters. The applicability limits of the earlier developed nonrelativistic theories are refined.

  15. Application of the SPH method in nodal diffusion analyses of SFR cores

    Energy Technology Data Exchange (ETDEWEB)

    Nikitin, Evgeny; Fridman, Emil [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany). Div. Reactor Safety; Mikityuk, K. [Paul Scherrer Institut, Villigen (Switzerland)

    2016-07-01

    The current study investigated the potential of the SPH method, applied to correct the few-group XS produced by Serpent, to further improve the accuracy of the nodal diffusion solutions. The procedure for the generation of SPH-corrected few-group XS is presented in the paper. The performance of the SPH method was tested on a large oxide SFR core from the OECD/NEA SFR benchmark. The reference SFR core was modeled with the DYN3D and PARCS nodal diffusion codes using the SPH-corrected few-group XS generated by Serpent. The nodal diffusion results obtained with and without SPH correction were compared to the reference full-core Serpent MC solution. It was demonstrated that the application of the SPH method improves the accuracy of the nodal diffusion solutions, particularly for the rodded core state.

  16. Estimation of reactor core calculation by HELIOS/MASTER at power generating condition through DeCART, whole-core transport code

    International Nuclear Information System (INIS)

    Kim, H. Y.; Joo, H. G.; Kim, K. S.; Kim, G. Y.; Jang, M. H.

    2003-01-01

    The reactivity and power distribution errors of the HELIOS/MASTER core calculation under power generating conditions are assessed using a whole core transport code DeCART. For this work, the cross section tablesets were generated for a medium sized PWR following the standard procedure and two group nodal core calculations were performed. The test cases include the HELIOS calculations for 2-D assemblies at constant thermal conditions, MASTER 3D assembly calculations at power generating conditions, and the core calculations at HZP, HFP, and an abnormal power conditions. In all these cases, the results of the DeCART code in which pinwise thermal feedback effects are incorporated are used as the reference. The core reactivity, assemblywise power distribution, axial power distribution, peaking factor, and thermal feedback effects are then compared. The comparison shows that the error of the HELIOS/MASTER system in the core reactivity, assembly wise power distribution, pin peaking factor are only 100∼300 pcm, 3%, and 2%, respectively. As far as the detailed pinwise power distribution is concerned, however, errors greater than 15% are observed

  17. Adolescents' non-core food intake: a description of what, where and with whom adolescents consume non-core foods.

    Science.gov (United States)

    Toumpakari, Zoi; Haase, Anne M; Johnson, Laura

    2016-06-01

    Little is known about adolescents' non-core food intake in the UK and the eating context in which they consume non-core foods. The present study aimed to describe types of non-core foods consumed by British adolescents in total and across different eating contexts. A descriptive analysis, using cross-sectional data from food diaries. Non-core foods were classified based on cut-off points of fat and sugar from the Australian Guide to Healthy Eating. Eating context was defined as 'where' and 'with whom' adolescents consumed each food. Percentages of non-core energy were calculated for each food group in total and across eating contexts. A combined ranking was then created to account for each food's contribution to non-core energy intake and its popularity of consumption (percentage of consumers). The UK National Diet and Nutrition Survey 2008-2011. Adolescents across the UK aged 11-18 years (n 666). Non-core food comprised 39·5 % of total energy intake and was mostly 'Regular soft drinks', 'Crisps & savoury snacks', 'Chips & potato products', 'Chocolate' and 'Biscuits'. Adolescents ate 57·0 % and 51·3 % of non-core food at 'Eateries' or with 'Friends', compared with 33·2 % and 32·1 % at 'Home' or with 'Parents'. Persistent foods consumed across eating contexts were 'Regular soft drinks' and 'Chips & potato products'. Regular soft drinks contribute the most energy and are the most popular non-core food consumed by adolescents regardless of context, and represent a good target for interventions to reduce non-core food consumption.

  18. Burnup-dependent core neutronics analysis of plate-type research reactor using deterministic and stochastic methods

    International Nuclear Information System (INIS)

    Liu, Shichang; Wang, Guanbo; Liang, Jingang; Wu, Gaochen; Wang, Kan

    2015-01-01

    Highlights: • DRAGON & DONJON were applied in burnup calculations of plate-type research reactors. • Continuous-energy Monte Carlo burnup calculations by RMC were chosen as references. • Comparisons of keff, isotopic densities and power distribution were performed. • Reasons leading to discrepancies between two different approaches were analyzed. • DRAGON & DONJON is capable of burnup calculations with appropriate treatments. - Abstract: The burnup-dependent core neutronics analysis of the plate-type research reactors such as JRR-3M poses a challenge for traditional neutronics calculational tools and schemes for power reactors, due to the characteristics of complex geometry, highly heterogeneity, large leakage and the particular neutron spectrum of the research reactors. Two different theoretical approaches, the deterministic and the stochastic methods, are used for the burnup-dependent core neutronics analysis of the JRR-3M plate-type research reactor in this paper. For the deterministic method the neutronics codes DRAGON & DONJON are used, while the continuous-energy Monte Carlo code RMC (Reactor Monte Carlo code) is employed for the stochastic one. In the first stage, the homogenizations of few-group cross sections by DRAGON and the full core diffusion calculations by DONJON have been verified by comparing with the detailed Monte Carlo simulations. In the second stage, the burnup-dependent calculations of both assembly level and the full core level were carried out, to examine the capability of the deterministic code system DRAGON & DONJON to reliably simulate the burnup-dependent behavior of research reactors. The results indicate that both RMC and DRAGON & DONJON code system are capable of burnup-dependent neutronics analysis of research reactors, provided that appropriate treatments are applied in both assembly and core levels for the deterministic codes

  19. Synthesis of Water-Soluble Amino Functionalized Multithiacalix[4]arene via Quaternization of Tertiary Amino Groups

    Directory of Open Access Journals (Sweden)

    Roman Nosov

    2018-05-01

    Full Text Available A convenient approach to the synthesis of multithiacalix[4]arene derivatives containing amino groups and phthalimide fragments by the formation of quaternary ammonium salts is presented. As the initial macrocycle for the synthesis of multithiacalix[4]arenes, a differently substituted p-tert-butylthiacalix[4]arene containing bromoacetamide and three phthalimide fragments was used in a 1,3-alternate conformation. The macrocycle in cone conformation containing the tertiary amino groups was found to be a convenient core for the multithiacalix[4]arene systems. Interaction of the core multithiacalix[4]arene with monobromoacetamide derivatives of p-tert-butylthiacalix[4]arene resulted in formation in high yields of pentakisthiacalix[4]arene containing quaternary ammonium and phthalimide fragments. The removal of phthalimide groups led to the formation of amino multithiacalix[4]arene in a good yield. Based on dynamic light scattering, it was shown that the synthesized amino multithiacalix[4]arene, with pronounced hydrophobic and hydrophilic fragments, formed dendrimer-like nanoparticles in water via direct supramolecular self-assembly.

  20. Efficient single-mode operation of a cladding-pumped ytterbium-doped helical-core fiber laser.

    Science.gov (United States)

    Wang, P; Cooper, L J; Sahu, J K; Clarkson, W A

    2006-01-15

    A novel approach to achieving robust single-spatial-mode operation of cladding-pumped fiber lasers with multimode cores is reported. The approach is based on the use of a fiber geometry in which the core has a helical trajectory within the inner cladding to suppress laser oscillation on higher-order modes. In a preliminary proof-of-principle study, efficient single-mode operation of a cladding-pumped ytterbium-doped helical-core fiber laser with a 30 microm diameter core and a numerical aperture of 0.087 has been demonstrated. The laser yielded 60.4 W of output at 1043 nm in a beam with M2 clad fiber lasers.

  1. Analysis Of Core Management For The Transition Cores Of RSG-GAS Reactor To Full-Silicide Core

    International Nuclear Information System (INIS)

    Malem Sembiring, Tagor; Suparlina, Lily; Tukiran

    2001-01-01

    The core conversion of RSG-GAS reactor from oxide to silicide core with meat density of 2.96 g U/cc is still doing. At the end of 2000, the reactor has been operated for 3 transition cores which is the mixed core of oxide-silicide. Based on previous work, the calculated core parameter for the cores were obtained and it is needed 10 transition cores to achieve a full-silicide core. The objective of this work is to acquire the effect of the increment of the number of silicide fuel on the core parameters such as excess reactivity and shutdown margin. The measurement of the core parameters was carried out using the method of compensation of couple control rods. The experiment shows that the excess reactivity trends lower with the increment of the number of silicide fuel in the core. However, the shutdown margin is not change with the increment of the number of silicide fuel. Therefore, the transition cores can be operated safety to a full-silicide core

  2. Competition between direct interaction and Kondo effect: Renormalization-group approach

    International Nuclear Information System (INIS)

    Allub, R.

    1988-03-01

    Via the Wilson renormalization-group approach, the effect of the competition between direct interaction (J L ) and Kondo coupling is studied, in the magnetic susceptibility of a model with two different magnetic impurities. For the ferromagnetic interaction (J L > 0) between the localized impurities, we find a magnetic ground state and a divergent susceptibility at low temperatures. For (J L < 0), two different Kondo temperatures and a non-magnetic ground state are distinguished. (author). 12 refs, 1 fig

  3. Interface engineered ferrite@ferroelectric core-shell nanostructures: A facile approach to impart superior magneto-electric coupling

    Science.gov (United States)

    Abraham, Ann Rose; Raneesh, B.; Das, Dipankar; Oluwafemi, Oluwatobi Samuel; Thomas, Sabu; Kalarikkal, Nandakumar

    2018-04-01

    The electric field control of magnetism in multiferroics is attractive for the realization of ultra-fast and miniaturized low power device applications like nonvolatile memories. Room temperature hybrid multiferroic heterostructures with core-shell (0-0) architecture (ferrite core and ferroelectric shell) were developed via a two-step method. High-Resolution Transmission Electron Microscopy (HRTEM) images confirm the core-shell structure. The temperature dependant magnetization measurements and Mossbauer spectra reveal superparamagnetic nature of the core-shell sample. The ferroelectric hysteresis loops reveal leaky nature of the samples. The results indicate the promising applications of the samples for magneto-electric memories and spintronics.

  4. Medical Oversight, Educational Core Content, and Proposed Scopes of Practice of Wilderness EMS Providers: A Joint Project Developed by Wilderness EMS Educators, Medical Directors, and Regulators Using a Delphi Approach.

    Science.gov (United States)

    Millin, Michael G; Johnson, David E; Schimelpfenig, Tod; Conover, Keith; Sholl, Matthew; Busko, Jonnathan; Alter, Rachael; Smith, Will; Symonds, Jennifer; Taillac, Peter; Hawkins, Seth C

    2017-01-01

    A disparity exists between the skills needed to manage patients in wilderness EMS environments and the scopes of practice that are traditionally approved by state EMS regulators. In response, the National Association of EMS Physicians Wilderness EMS Committee led a project to define the educational core content supporting scopes of practice of wilderness EMS providers and the conditions when wilderness EMS providers should be required to have medical oversight. Using a Delphi process, a group of experts in wilderness EMS, representing educators, medical directors, and regulators, developed model educational core content. This core content is a foundation for wilderness EMS provider scopes of practice and builds on both the National EMS Education Standards and the National EMS Scope of Practice Model. These experts also identified the conditions when oversight is needed for wilderness EMS providers. By consensus, this group of experts identified the educational core content for four unique levels of wilderness EMS providers: Wilderness Emergency Medical Responder (WEMR), Wilderness Emergency Medical Technician (WEMT), Wilderness Advanced Emergency Medical Technician (WAEMT), and Wilderness Paramedic (WParamedic). These levels include specialized skills and techniques pertinent to the operational environment. The skills and techniques increase in complexity with more advanced certification levels, and address the unique circumstances of providing care to patients in the wilderness environment. Furthermore, this group identified that providers having a defined duty to act should be functioning with medical oversight. This group of experts defined the educational core content supporting the specific scopes of practice that each certification level of wilderness EMS provider should have when providing patient care in the wilderness setting. Wilderness EMS providers are, indeed, providing health care and should thus function within defined scopes of practice and with

  5. Core-to-core uniformity improvement in multi-core fiber Bragg gratings

    Science.gov (United States)

    Lindley, Emma; Min, Seong-Sik; Leon-Saval, Sergio; Cvetojevic, Nick; Jovanovic, Nemanja; Bland-Hawthorn, Joss; Lawrence, Jon; Gris-Sanchez, Itandehui; Birks, Tim; Haynes, Roger; Haynes, Dionne

    2014-07-01

    Multi-core fiber Bragg gratings (MCFBGs) will be a valuable tool not only in communications but also various astronomical, sensing and industry applications. In this paper we address some of the technical challenges of fabricating effective multi-core gratings by simulating improvements to the writing method. These methods allow a system designed for inscribing single-core fibers to cope with MCFBG fabrication with only minor, passive changes to the writing process. Using a capillary tube that was polished on one side, the field entering the fiber was flattened which improved the coverage and uniformity of all cores.

  6. The Effect of Group Therapy With Transactional Analysis Approach on Emotional Intelligence, Executive Functions and Drug Dependency.

    Science.gov (United States)

    Forghani, Masoomeh; Ghanbari Hashem Abadi, Bahram Ali

    2016-06-01

    The aim of the present study was to evaluate the effect of group psychotherapy with transactional analysis (TA) approach on emotional intelligence (EI), executive functions and substance dependency among drug-addicts at rehabilitation centers in Mashhad city, Iran, in 2013. In this quasi-experimental study with pretest, posttest, case- control stages, 30 patients were selected from a rehabilitation center and randomly divided into two groups. The case group received 12 sessions of group psychotherapy with transactional analysis approach. Then the effects of independent variable (group psychotherapy with TA approach) on EI, executive function and drug dependency were assessed. The Bar-on test was used for EI, Stroop test for measuring executive function and morphine test, meth-amphetamines and B2 test for evaluating drug dependency. Data were analyzed using multifactorial covariance analysis, Levenes' analysis, MANCOVA, t-student and Pearson correlation coefficient tests t with SPSS software. Our results showed that group psychotherapy with the TA approach was effective in improving EI, executive functions and decreasing drug dependency (P addicts and prevents addiction recurrence by improving the coping capabilities and some mental functions of the subjects. However, there are some limitations regarding this study including follow-up duration and sample size.

  7. Time-dependent London approach: Dissipation due to out-of-core normal excitations by moving vortices

    Science.gov (United States)

    Kogan, V. G.

    2018-03-01

    The dissipative currents due to normal excitations are included in the London description. The resulting time-dependent London equations are solved for a moving vortex and a moving vortex lattice. It is shown that the field distribution of a moving vortex loses its cylindrical symmetry. It experiences contraction that is stronger in the direction of the motion than in the direction normal to the velocity v . The London contribution of normal currents to dissipation is small relative to the Bardeen-Stephen core dissipation at small velocities, but it approaches the latter at high velocities, where this contribution is no longer proportional to v2. To minimize the London contribution to dissipation, the vortex lattice is oriented so as to have one of the unit cell vectors along the velocity. This effect is seen in experiments and predicted within the time-dependent Ginzburg-Landau theory.

  8. Severe accident management development program for VVER-1000 and VVER-440/213 based on the westinghouse owners group approach

    International Nuclear Information System (INIS)

    Felix, E.; Dessars, N.

    2003-01-01

    The development of the Westinghouse Owners Group Severe Accident Management Guidelines (WOG SAMG) between 1991 and 1994 was initiated in response to the U.S. Nuclear Regulatory Commission (NRC) requirement for addressing the regulatory severe accident concerns. Hence, the WOG SAMG is designed to interface with other existing procedures at the plant and is used in accident sequences that have progressed to the point where these other procedures are not applicable any longer, i.e. following core damage. The primary purpose of the WOG SAMG is to reach a controlled stable state, which can be declared when fission product releases are controlled, challenges to the confinement fission product boundary have been mitigated, and adequate heat removal is provided to the core and the containment. Although the WOG SAMG is a generic severe accident management guidance developed for use by the entirety of the operating Westinghouse PWR plants, provisions have been made in their development to address specific features of individual plants such as confinement type and the feasibility of reactor cavity flooding. Similarly, the generic SAMG does not address unique plant features and equipment, but rather allows for consideration of plant specific features and strategies. This adaptable approach has led to several SAMG development programs for VVER-1000 and VVER-440 type of power plants, under Westinghouse' s lead. The first of these programs carried out to completion was for Temelin NPP - VVER-1000 - in the first quarter of 2003. Other ongoing programs aim at providing a similar work for VVER-440 design, namely Dukovany, Mochovce and Bohunice NPPs. The challenge of adapting the existing generic WOG material to plants other than PWRs mainly arises for VVER-440 because of important differences in confinement design, making it more vulnerable to ex-vessel phenomena such as hydrogen burn. Also, for both eastern designs, cavity flooding strategy requires special consideration and

  9. Whiter, brighter, and more stable cellulose paper coated with TiO2 /SiO2 core/shell nanoparticles using a layer-by-layer approach.

    Science.gov (United States)

    Cheng, Fei; Lorch, Mark; Sajedin, Seyed Mani; Kelly, Stephen M; Kornherr, Andreas

    2013-08-01

    To inhibit the photocatalytic degradation of organic material supports induced by small titania (TiO2 ) nanoparticles, four kinds of TiO2 nanoparticles, that is, commercial P25-TiO2 , commercial rutile phase TiO2 , rutile TiO2 nanorods and rutile TiO2 spheres, prepared from TiCl4 , were coated with a thin, but dense, coating of silica (SiO2 ) using a conventional sol-gel technique to form TiO2 /SiO2 core/shell nanoparticles. These core/shell particles were deposited and fixed as a very thin coating onto the surface of cellulose paper samples by a wet-chemistry polyelectrolyte layer-by-layer approach. The TiO2 /SiO2 nanocoated paper samples exhibit higher whiteness and brightness and greater stability to UV-bleaching than comparable samples of blank paper. There are many potential applications for this green chemistry approach to protect cellulosic fibres from UV-bleaching in sunlight and to improve their whiteness and brightness. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Consensus on core phenomena and statements describing Basic Body Awareness Therapy within the movement awareness domain in physiotherapy.

    Science.gov (United States)

    Skjaerven, L H; Mattsson, M; Catalan-Matamoros, D; Parker, A; Gard, G; Gyllensten, A Lundvik

    2018-02-26

    Physiotherapists are facing complex health challenges in the treatment of persons suffering from long-lasting musculoskeletal disorders and mental health problems. Basic Body Awareness Therapy (BBAT) is a physiotherapy approach within the movement awareness domain developed to bridge physical, mental, and relational health challenges. The purpose of this study was to reach a consensus on core phenomena and statements describing BBAT. A consensus-building process was conducted using the nominal group technique (NGT). Twenty-one BBAT experts from 10 European countries participated in a concentrated weekend workshop of 20 hours. All participants signed informed consent. Participants reached a consensus on 138 core phenomena, clustered in three overarching categories: clinical core, historical roots, and research and evaluation phenomena. Of the 106 clinical core phenomena, the participants agreed on three categories of phenomena: movement quality, movement awareness practice, and movement awareness therapy and pedagogy. Furthermore, the participants reached 100 percent consensus on 16 of 30 statements describing BBAT. This study provides a consensus on core phenomena and statements describing BBAT. The data reveal phenomena implemented when promoting movement quality through movement awareness. Data provide clarity in some aspects of the vocabulary as fundamental theory. Further reearch will be developed.

  11. Provincializing and Localizing Core-Periphery Relations

    Directory of Open Access Journals (Sweden)

    Cilja Harders

    2015-11-01

    Full Text Available The paper engages engages with core-periphery conceptions because they are a useful "Denkfigur" in a time of increasing global interconnectedness. I argue that the core-periphery metaphor is a useful one because it provides us (1 with a relational tool of analysis and (2 with a focus on asymmetric power-relations. But it also has some serious limitations such as a tendency to be over-deterministic and to be too global in scale. In order to meet these limitations, I suggest to re-scale Prebisch, Amin and Wallersteins global conception of core and periphery to the local scale. I hold that we need to “provincialise” the core-periphery metaphor to borrow Chakrabarty’s (2000 famous term and to make the agency of local actors more relevant to our understanding of political dynamics in the Maghreb, Mashreq and Gulf region. I sketch how “provincialized” and “localized” ways of using the core-periphery metaphor could look like. This part builds on the main ideas Malika Bouziane, Anja Hoffmann and I developed in the introduction to our volume on “Local Politics and Contemporary Transformations in the Arab World” as well as my approach of a “state analysis from below”.

  12. Information about AER WG A on improvement, extension and validation of parametrized few-group libraries for VVER 440 and VVER 1000

    International Nuclear Information System (INIS)

    Mikolas, P.

    2010-01-01

    Joint AER Working Group A on 'Improvement, extension and validation of parameterized few-group libraries for WWER-440 and WWER-1000' and AER Working Group B on 'Core design' nineteenth meeting was hosted by VUJE a. s. in Modra - Harmonia (Slovakia) during the period of 20. to 22. April 2010. There were present altogether 12 participants from 8 member organizations and 9 papers were presented (8 of them in written form). Objectives of the meeting of WG A are: Issues connected with spectral calculations and few-groups libraries preparation, their accuracy and validation. Presentations were devoted to some aspects of transport and diffusion calculations and to the benchmark dealing with WWER-1000 core periphery power tilt. Tamas Parko (co-authors Istvan Pos and Sandor Patai Szabo) described in his presentation 'Application of Discontinuity factors in C-PORCA 7 code', Radoslav Zajac (co-authors Petr Darilek and Vladimir Necas) spoke about 'Fast Reactor Nodalisation in HELIOS Code', Gabriel Farkas presented 'Calculation of Spatial Weighting Functions of Ex-Core Neutron Detectors for WWER-440 Using Monte Carlo Approach' and Daniel Sprinzl (co-authors Vaclav Krysl, Pavel Mikolas and Jiri Svarny) provided a definition of a benchmark in ' 'MIDICORE' WWER-1000 core periphery power tilt benchmark proposal'. (Author)

  13. Developing an OMERACT Core Outcome Set for Assessing Safety Components in Rheumatology Trials

    DEFF Research Database (Denmark)

    Klokker, Louise; Tugwell, Peter; Furst, Daniel E

    2016-01-01

    in such COS. The Outcome Measures in Rheumatology (OMERACT) Filter 2.0 emphasizes the importance of measuring harms. The Safety Working Group was reestablished at the OMERACT 2016 with the objective to develop a COS for assessing safety components in trials across rheumatologic conditions. METHODS: The safety......OBJECTIVE: Failure to report harmful outcomes in clinical research can introduce bias favoring a potentially harmful intervention. While core outcome sets (COS) are available for benefits in randomized controlled trials in many rheumatic conditions, less attention has been paid to safety...... that patients consider relevant so that they will be able to make informed decisions. CONCLUSION: The OMERACT Safety Working Group will advance the work previously done within OMERACT using a new patient-driven approach....

  14. Some core contested concepts.

    Science.gov (United States)

    Chomsky, Noam

    2015-02-01

    Core concepts of language are highly contested. In some cases this is legitimate: real empirical and conceptual issues arise. In other cases, it seems that controversies are based on misunderstanding. A number of crucial cases are reviewed, and an approach to language is outlined that appears to have strong conceptual and empirical motivation, and to lead to conclusions about a number of significant issues that differ from some conventional beliefs.

  15. Analysis of a basic core performance for FBR core nuclear design. 3

    International Nuclear Information System (INIS)

    Kaneko, Kunio

    1999-03-01

    The spatial distribution of reaction rates in the ZPPR-13A, having an axially heterogeneous core, has been analyzed. The ZPPR-13A core is treated as a 2-dimensional RZ configuration consisting of a homogeneous core. The analysis is performed by utilizing both probabilistic and deterministic treatments. The probabilistic treatment is performed with the Monte Carlo Code MVP running with continuous energy variable. By comparing the results obtained by both treatments and reviewing the calculation method of effective resonance cross sections, for deterministic treatment, utilized for the reaction rate distributions, it is revealed that the present treatment of effective resonance cross sections is not accurate, since there are observed effects due to dependence on energy group number or energy group width, and on anisotropic scattering. To utilize multi-band method for calculating effective resonance cross sections, widely used by the European researchers, the computer code GROUPIE is installed and the performance of the code is confirmed. Although, in order to improve effective resonance cross sections accuracy, the thermal neutron reactor standard code system SRAC-95 was introduced last year in which the ultra-fine group spectrum calculation module PEACO worked specially under the restriction that number of nuclei having resonance cross section, in any zone, should be less than three, because collision probabilities were obtained by an interpolation method. This year, the module is improved so that these collision probabilities are directly calculated, and by this improvement the highly accurate effective resonance cross sections below the energy of 40.868 keV can be calculated for whole geometrical configurations considered. To extend the application range of the module PEACO, the cross sections of sodium and structure material nuclei are prepared so that they are also represented as ultra-fine group cross sections. By such modifications of cross section library

  16. A simple approach to the construction of the core structure present

    Indian Academy of Sciences (India)

    A convenient route for the synthesis of oxacyclobutapentalene, the tricyclic bridged core structure present in bioactive marine diterpene bielschowskysin and the polyketide hippolachnin A, is reported. The key steps involve ring closing metathesis of a triene derived from D-mannitol to produce selectively the dihydrofuran ...

  17. Coupling between core and cladding modes in a helical core fiber with large core offset

    International Nuclear Information System (INIS)

    Napiorkowski, Maciej; Urbanczyk, Waclaw

    2016-01-01

    We analyzed the effect of resonant coupling between core and cladding modes in a helical core fiber with large core offset using the fully vectorial method based on the transformation optics formalism. Our study revealed that the resonant couplings to lower order cladding modes predicted by perturbative methods and observed experimentally in fibers with small core offsets are in fact prohibited for larger core offsets. This effect is related to the lack of phase matching caused by elongation of the optical path of the fundamental modes in the helical core. Moreover, strong couplings to the cladding modes of the azimuthal modal number much higher than predicted by perturbative methods may be observed for large core offsets, as the core offset introduces higher order angular harmonics in the field distribution of the fundamental modes. Finally, in contrast to previous studies, we demonstrate the existence of spectrally broad polarization sensitive couplings to the cladding modes suggesting that helical core fibers with large core offsets may be used as broadband circular polarizers. (paper)

  18. Evaluation of In-Core Fuel Management for the Transition Cores of RSG-GAS Reactor to Full-Silicide Core

    International Nuclear Information System (INIS)

    S, Tukiran; MS, Tagor; P, Surian

    2003-01-01

    The core conversion of RSG-GAS reactor from oxide to silicide core with meat density of 2.96 gU/cc has been done. The core-of RSG-GAS reactor has been operated full core of silicide fuels which is started with the mixed core of oxide-silicide start from core 36. Based on previous work, the calculated core parameter for the cores were obtained and it is needed 9 transition cores (core 36 - 44) to achieve a full-silicide core (core 45). The objective of this work is to acquire the effect of the increment of the number of silicide fuel on the core parameters. Conversion core was achieved by transition cores mixed oxide-silicide fuels. Each transition core is calculated and measured core parameter such as, excess reactivity and shutdown margin. Calculation done by Batan-EQUIL-2D code and measurement of the core parameters was carried out using the method of compensation of couple control rods. The results of calculation and experiment shows that the excess reactivity trends lower with the increment of the number of silicide fuel in the core. However, the shutdown margin is not change with the increment of the number of silicide fuel. Therefore, the transition cores can be operated safely to a full-silicide core

  19. Analysis on First Criticality Benchmark Calculation of HTR-10 Core

    International Nuclear Information System (INIS)

    Zuhair; Ferhat-Aziz; As-Natio-Lasman

    2000-01-01

    HTR-10 is a graphite-moderated and helium-gas cooled pebble bed reactor with an average helium outlet temperature of 700 o C and thermal power of 10 MW. The first criticality benchmark problem of HTR-10 in this paper includes the loading number calculation of nuclear fuel in the form of UO 2 ball with U-235 enrichment of 17% for the first criticality under the helium atmosphere and core temperature of 20 o C, and the effective multiplication factor (k eff ) calculation of full core (5 m 3 ) under the helium atmosphere and various core temperatures. The group constants of fuel mixture, moderator and reflector materials were generated with WlMS/D4 using spherical model and 4 neutron energy group. The critical core height of 150.1 cm obtained from CITATION in 2-D R-Z reactor geometry exists in the calculation range of INET China, JAERI Japan and BATAN Indonesia, and OKBM Russia. The k eff calculation result of full core at various temperatures shows that the HTR-10 has negative temperature coefficient of reactivity. (author)

  20. Effect of Core Training Program on Physical Functional Performance in Female Soccer Players

    Science.gov (United States)

    Taskin, Cengiz

    2016-01-01

    The purpose of this study was to determine the effect of core training program on speed, acceleration, vertical jump, and standing long jump in female soccer players. A total of 40 female soccer players volunteered to participate in this study. They were divided randomly into 1 of 2 groups: core training group (CTG; n = 20) and control group (CG;…

  1. The effect of peculiar complex core balance training on isokinetic muscle functions of the knee and lumbus.

    Science.gov (United States)

    Lee, Myungsun; Han, Gunsoo

    2016-04-01

    [Purpose] This study aimed to investigate the effect of peculiar complex core balance training on the isokinetic muscle function of the knee joint and lumbus to provide fundamental data for establishing a training program that focuses on improving the performance and prevention of injury by developing the core and low extremity muscles. [Subjects and Methods] The participants in this study included a total of ten high school athletes involved in a throwing event for over five years. The subjects were randomly divided into two groups: The experimental group (N=5) and the control group (N=5). The experimental group underwent peculiar complex core balance training. [Results] According to the analysis of covariance, there was a significant effect of peculiar complex core balance training. Therefore, the isokinetic muscle function of the knee joint and lumbus in the experimental group participating in peculiar complex core balance training was significantly increased compared to the control group. [Conclusion] It is concluded that peculiar complex core balance training had a positive effect on the isokinetic muscle function of the knee and lumbus in throwing event athletes.

  2. Quantum renormalization group approach to geometric phases in spin chains

    International Nuclear Information System (INIS)

    Jafari, R.

    2013-01-01

    A relation between geometric phases and criticality of spin chains are studied using the quantum renormalization-group approach. I have shown how the geometric phase evolve as the size of the system becomes large, i.e., the finite size scaling is obtained. The renormalization scheme demonstrates how the first derivative of the geometric phase with respect to the field strength diverges at the critical point and maximum value of the first derivative, and its position, scales with the exponent of the system size

  3. Basis of integrated approach to sports and recreational activities of students of special medical groups

    Directory of Open Access Journals (Sweden)

    L.V. Zaharova

    2014-02-01

    Full Text Available Purpose : to prove the superiority of techniques integrated approach to sports and recreational activities of students of special medical groups in the educational institution. Material / methods : the annual pedagogical experiment conducted on three groups that have been formed based on the results of preliminary studies based on diagnosis. Learning process based on the principle of improving training. Results : the advantages of an integrated approach to sports and recreational activities of students with disorders of the musculoskeletal system. Recommended approaches to increase physical and functional training. Also - the formation of a stable demand of motor activity, leading healthy lifestyles, in the acquisition of social status in the educational activity. Conclusions : the integrated approach will meet the educational needs of students to form a cultural competence of the individual in the preservation and conservation of health, ability to adapt and successfully implement their professional activities.

  4. "Functional" Inspiratory and Core Muscle Training Enhances Running Performance and Economy.

    Science.gov (United States)

    Tong, Tomas K; McConnell, Alison K; Lin, Hua; Nie, Jinlei; Zhang, Haifeng; Wang, Jiayuan

    2016-10-01

    Tong, TK, McConnell, AK, Lin, H, Nie, J, Zhang, H, and Wang, J. "Functional" inspiratory and core muscle training enhances running performance and economy. J Strength Cond Res 30(10): 2942-2951, 2016-We compared the effects of two 6-week high-intensity interval training interventions. Under the control condition (CON), only interval training was undertaken, whereas under the intervention condition (ICT), interval training sessions were followed immediately by core training, which was combined with simultaneous inspiratory muscle training (IMT)-"functional" IMT. Sixteen recreational runners were allocated to either ICT or CON groups. Before the intervention phase, both groups undertook a 4-week program of "foundation" IMT to control for the known ergogenic effect of IMT (30 inspiratory efforts at 50% maximal static inspiratory pressure [P0] per set, 2 sets per day, 6 days per week). The subsequent 6-week interval running training phase consisted of 3-4 sessions per week. In addition, the ICT group undertook 4 inspiratory-loaded core exercises (10 repetitions per set, 2 sets per day, inspiratory load set at 50% post-IMT P0) immediately after each interval training session. The CON group received neither core training nor functional IMT. After the intervention phase, global inspiratory and core muscle functions increased in both groups (p ≤ 0.05), as evidenced by P0 and a sport-specific endurance plank test (SEPT) performance, respectively. Compared with CON, the ICT group showed larger improvements in SEPT, running economy at the speed of the onset of blood lactate accumulation, and 1-hour running performance (3.04% vs. 1.57%, p ≤ 0.05). The changes in these variables were interindividually correlated (r ≥ 0.57, n = 16, p ≤ 0.05). Such findings suggest that the addition of inspiratory-loaded core conditioning into a high-intensity interval training program augments the influence of the interval program on endurance running performance and that this may be

  5. Level set method for optimal shape design of MRAM core. Micromagnetic approach

    International Nuclear Information System (INIS)

    Melicher, Valdemar; Cimrak, Ivan; Keer, Roger van

    2008-01-01

    We aim at optimizing the shape of the magnetic core in MRAM memories. The evolution of the magnetization during the writing process is described by the Landau-Lifshitz equation (LLE). The actual shape of the core in one cell is characterized by the coefficient γ. Cost functional f=f(γ) expresses the quality of the writing process having in mind the competition between the full-select and the half-select element. We derive an explicit form of the derivative F=∂f/∂γ which allows for the use of gradient-type methods for the actual computation of the optimized shape (e.g., steepest descend method). The level set method (LSM) is employed for the representation of the piecewise constant coefficient γ

  6. A strategic conflict avoidance approach based on cooperative coevolutionary with the dynamic grouping strategy

    Science.gov (United States)

    Guan, Xiangmin; Zhang, Xuejun; Wei, Jian; Hwang, Inseok; Zhu, Yanbo; Cai, Kaiquan

    2016-07-01

    Conflict avoidance plays a crucial role in guaranteeing the safety and efficiency of the air traffic management system. Recently, the strategic conflict avoidance (SCA) problem has attracted more and more attention. Taking into consideration the large-scale flight planning in a global view, SCA can be formulated as a large-scale combinatorial optimisation problem with complex constraints and tight couplings between variables, which is difficult to solve. In this paper, an SCA approach based on the cooperative coevolution algorithm combined with a new decomposition strategy is proposed to prevent the premature convergence and improve the search capability. The flights are divided into several groups using the new grouping strategy, referred to as the dynamic grouping strategy, which takes full advantage of the prior knowledge of the problem to better deal with the tight couplings among flights through maximising the chance of putting flights with conflicts in the same group, compared with existing grouping strategies. Then, a tuned genetic algorithm (GA) is applied to different groups simultaneously to resolve conflicts. Finally, the high-quality solutions are obtained through cooperation between different groups based on cooperative coevolution. Simulation results using real flight data from the China air route network and daily flight plans demonstrate that the proposed algorithm can reduce the number of conflicts and the average delay effectively, outperforming existing approaches including GAs, the memetic algorithm, and the cooperative coevolution algorithms with different well-known grouping strategies.

  7. Quantum chemical approach to estimating the thermodynamics of metabolic reactions.

    Science.gov (United States)

    Jinich, Adrian; Rappoport, Dmitrij; Dunn, Ian; Sanchez-Lengeling, Benjamin; Olivares-Amaya, Roberto; Noor, Elad; Even, Arren Bar; Aspuru-Guzik, Alán

    2014-11-12

    Thermodynamics plays an increasingly important role in modeling and engineering metabolism. We present the first nonempirical computational method for estimating standard Gibbs reaction energies of metabolic reactions based on quantum chemistry, which can help fill in the gaps in the existing thermodynamic data. When applied to a test set of reactions from core metabolism, the quantum chemical approach is comparable in accuracy to group contribution methods for isomerization and group transfer reactions and for reactions not including multiply charged anions. The errors in standard Gibbs reaction energy estimates are correlated with the charges of the participating molecules. The quantum chemical approach is amenable to systematic improvements and holds potential for providing thermodynamic data for all of metabolism.

  8. CONSIDER - Core Outcome Set in IAD Research: study protocol for establishing a core set of outcomes and measurements in incontinence-associated dermatitis research.

    Science.gov (United States)

    Van den Bussche, Karen; De Meyer, Dorien; Van Damme, Nele; Kottner, Jan; Beeckman, Dimitri

    2017-10-01

    This study protocol describes the methodology for the development of a core set of outcomes and a core set of measurements for incontinence-associated dermatitis. Incontinence is a widespread disorder with an important impact on quality of life. One of the most common complications is incontinence-associated dermatitis, resulting from chemical and physical irritation of the skin barrier, triggering inflammation and skin damage. Managing incontinence-associated dermatitis is an important challenge for nurses. Several interventions have been assessed in clinical trials, but heterogeneity in study outcomes complicates the comparability and standardization. To overcome this challenge, the development of a core outcome set, a minimum set of outcomes and measurements to be assessed in clinical research, is needed. A project team, International Steering Committee and panelists will be involved to guide the development of the core outcome set. The framework of the Harmonizing Outcomes Measures for Eczema roadmap endorsed by Cochrane Skin Group Core Outcomes Set Initiative, is used to inform the project design. A systematic literature review, interviews to integrate the patients' perspective and a consensus study with healthcare researchers and providers using the Delphi procedure will be performed. The project was approved by the Ethics review Committee (April 2016). This is the first project that will identify a core outcome set of outcomes and measurements for incontinence-associated dermatitis research. A core outcome set will reduce possible reporting bias, allow results comparisons and statistical pooling across trials and strengthen evidence-based practice and decision-making. This project has been registered in the Core Outcome Measures in Effectiveness Trials (COMET) database and is part of the Cochrane Skin Group Core Outcomes Set Initiative (CSG-COUSIN). © 2016 John Wiley & Sons Ltd.

  9. Improvement of Axial Reflector Cross Section Generation Model for PWR Core Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Shim, Cheon Bo; Lee, Kyung Hoon; Cho, Jin Young [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    This paper covers the study for improvement of axial reflector XS generation model. In the next section, the improved 1D core model is represented in detail. Reflector XS generated by the improved model is compared to that of the conventional model in the third section. Nuclear design parameters generated by these two XS sets are also covered in that section. Significant of this study is discussed in the last section. Two-step procedure has been regarded as the most practical approach for reactor core designs because it offers core design parameters quite rapidly within acceptable range. Thus this approach is adopted for SMART (System-integrated Modular Advanced Reac- Tor) core design in KAERI with the DeCART2D1.1/ MASTER4.0 (hereafter noted as DeCART2D/ MASTER) code system. Within the framework of the two-step procedure based SMART core design, various researches have been studied to improve the core design reliability and efficiency. One of them is improvement of reflector cross section (XS) generation models. While the conventional FA/reflector two-node model used for most core designs to generate reflector XS cannot consider the actual configuration of fuel rods that intersect at right angles to axial reflectors, the revised model reflects the axial fuel configuration by introducing the radially simplified core model. The significance of the model revision is evaluated by observing HGC generated by DeCART2D, reflector XS, and core design parameters generated by adopting the two models. And it is verified that about 30 ppm CBC error can be reduced and maximum Fq error decreases from about 6 % to 2.5 % by applying the revised model. Error of AO and axial power shapes are also reduced significantly. Therefore it can be concluded that the simplified 1D core model improves the accuracy of the axial reflector XS and leads to the two-step procedure reliability enhancement. Since it is hard for core designs to be free from the two-step approach, it is necessary to find

  10. Dosimetry Characteristics of Coupled Fast-Thermal Core 'HERBE'

    International Nuclear Information System (INIS)

    Pesic, M.; Milosevic, M.; Milovanovic, S.

    1996-01-01

    The 'HERBE' is new coupled fast-thermal core, designed in 1991, at the 'RB' reactor in the 'Vinca' Institute. It is used for verification of designed oriented computer codes developed in the Institute, training and sample irradiation in fast neutron field. For the last purpose a vertical experimental channel (VCH) is placed in the central axis of the fast core. Neutron spectrum in the centre of the VCR is calculated in 44 energy groups. Space distributions of two energy group neutron flux in the 'HERBE' are measured using gold foils and converted into the neutron absorbed dose (in air and tissue) using group flux-dose conversion factors. Gamma absorption doses in the air in the centre of the VCH are measured using calibrated small ionisation chamber filled with air. Determined dose rates are related to the reactor power. The first preliminary irradiations of silicon diodes (designed for production of the neutron dosemeters) in the centre of the VCH of the 'HERBE' fast core are carried out in 1994 and 1995. This paper describes calculation methods and measurement techniques applied to determination of the irradiation performance and dosimetry characteristics of the 'HERBE' system. (author)

  11. Earth's inner core: Innermost inner core or hemispherical variations?

    NARCIS (Netherlands)

    Lythgoe, K. H.; Deuss, A.|info:eu-repo/dai/nl/412396610; Rudge, J. F.; Neufeld, J. A.

    2014-01-01

    The structure of Earth's deep inner core has important implications for core evolution, since it is thought to be related to the early stages of core formation. Previous studies have suggested that there exists an innermost inner core with distinct anisotropy relative to the rest of the inner core.

  12. Dependence of Core and Extended Flux on Core Dominance ...

    Indian Academy of Sciences (India)

    Abstract. Based on two extragalactic radio source samples, the core dominance parameter is calculated, and the correlations between the core/extended flux density and core dominance parameter are investi- gated. When the core dominance parameter is lower than unity, it is linearly correlated with the core flux density, ...

  13. A Sustainability Model for Bringing Core Villages into Eco-tourism

    Directory of Open Access Journals (Sweden)

    Öztan TUĞUN

    2014-12-01

    Full Text Available Eco villages comprise a part of eco-tourism in rural regions, and are the destination of choice for those who wish to experience a taste of traditional life. In 2004, through a series of by-laws, the Turkish Republic of Northern Cyprus (KKTC initiated an eco-tourism movement in the Karpaz Peninsula. It was envisioned then that a planning approach within the framework of sustainability would be of importance to the island, and the project was developed using a sustainable planning approach with a view to contributing to the state’s initiative to incorporate core villages into tourism on the island. Eco-tourism and the eco-village were explored within the framework of environmental problems, sustainable development and environmental sustainability, and the concept of core village was explained, with an emphasis on its benefits for tourism on the island. To ensure sustainability of the villages, a conceptual framework based on the principles of sustainable planning was established, specifically, in this case, on the Wheeler principles. These are grouped as: a. Compact, efficient land use, b. Less automobile use, better access, c. Efficient use of resources, reduction of pollution and waste, d. Restoration of natural systems, e. Good housing and living environments, f. Healthy social ecology, g. Sustainable economics, h. Community participation, i. Preservation of local culture and wisdom. These are used as cross references in assessing the situation in Büyükkonuk Village, the place nominated as the pilot area for eco-tourism.

  14. Three dimensions transport calculations for PWR core

    International Nuclear Information System (INIS)

    Richebois, E.

    2000-01-01

    The objective of this work is to define improved 3-D core calculation methods based on the transport theory. These methods can be particularly useful and lead to more precise computations in areas of the core where anisotropy and steep flux gradients occur, especially near interface and boundary conditions and in regions of high heterogeneity (bundle with absorbent rods). In order to apply the transport theory a new method for calculating reflector constants has been developed, since traditional methods were only suited for 2-group diffusion core calculations and could not be extrapolated to transport calculations. In this thesis work, the new method for obtaining reflector constants is derived regardless of the number of energy groups and of the operator used. The core calculations results using the reflector constants thereof obtained have been validated on the EDF's power reactor Saint Laurent B1 with MOX loading. The advantages of a 3-D core transport calculation scheme have been highlighted as opposed to diffusion methods; there are a considerable number of significant effects and potential advantages to be gained in rod worth calculations for instance. These preliminary results obtained with on particular cycle will have to be confirmed by more systematic analysis. Accidents like MSLB (main steam line break) and LOCA (loss of coolant accident) should also be investigated and constitute challenging situations where anisotropy is high and/or flux gradients are steep. This method is now being validated for others EDF's PWRs' reactors, as well as for experimental reactors and other types of commercial reactors. (author)

  15. Consensus development of core competencies in intensive and critical care medicine training in China.

    Science.gov (United States)

    Hu, Xiaoyun; Xi, Xiuming; Ma, Penglin; Qiu, Haibo; Yu, Kaijiang; Tang, Yaoqing; Qian, Chuanyun; Fang, Qiang; Wang, Yushan; Yu, Xiangyou; Xu, Yuan; Du, Bin

    2016-10-16

    The aim of this study is to develop consensus on core competencies required for postgraduate training in intensive care medicine. We used a combination of a modified Delphi method and a nominal group technique to create and modify the list of core competencies to ensure maximum consensus. Ideas were generated modified from Competency Based Training in Intensive Care Medicine in Europe collaboration (CoBaTrICE) core competencies. An online survey invited healthcare professionals, educators, and trainees to rate and comment on these competencies. The output from the online survey was edited and then reviewed by a nominal group of 13 intensive care professionals to identify each competence for importance. The resulting list was then recirculated in the nominal group for iterative rating. The online survey yielded a list of 199 competencies for nominal group reviewing. After five rounds of rating, 129 competencies entered the final set defined as core competencies. We have generated a set of core competencies using a consensus technique which can serve as an indicator for training program development.

  16. Impact of a supervised worksite exercise program on back and core muscular endurance in firefighters.

    Science.gov (United States)

    Mayer, John M; Quillen, William S; Verna, Joe L; Chen, Ren; Lunseth, Paul; Dagenais, Simon

    2015-01-01

    Low back pain is a leading cause of disability in firefighters and is related to poor muscular endurance. This study examined the impact of supervised worksite exercise on back and core muscular endurance in firefighters. A cluster randomized controlled trial was used for this study. The study occurred in fire stations of a municipal fire department (Tampa, Florida). Subjects were 96 full-duty career firefighters who were randomly assigned by fire station to exercise (n = 54) or control (n = 42) groups. Exercise group participants completed a supervised exercise targeting the back and core muscles while on duty, two times per week for 24 weeks, in addition to their usual fitness regimen. Control group participants continued their usual fitness regimen. Back and core muscular endurance was assessed with the Biering-Sorensen test and plank test, respectively. Changes in back and core muscular endurance from baseline to 24 weeks were compared between groups using analysis of covariance and linear mixed effects models. After 24 weeks, the exercise group had 12% greater (p = .021) back muscular endurance and 21% greater (p = .0006) core muscular endurance than did the control group. The exercise intervention did not disrupt operations or job performance. A supervised worksite exercise program was safe and effective in improving back and core muscular endurance in firefighters, which could protect against future low back pain.

  17. Crisis Communication Competence in Co-Producing Safety with Citizen Groups

    Directory of Open Access Journals (Sweden)

    Anne Laajalahti

    2016-03-01

    Full Text Available The aim of this article is to explore interpersonal communication competence needed by crisis communication and management experts when co-operating with citizen groups in response to emergencies. Moreover, the purpose is to understand how response organizations can further develop this crisis communication competence and so contribute to the functioning of response networks. The research task is approached qualitatively by eliciting crisis communication and management experts’ (n = 33 perceptions of the interpersonal communication competence response organizations needs when co-operating with citizen groups. The data were gathered via an international online questionnaire using a method referred to as “thematic writing” and consist of written responses to open-ended questions on what constitutes the core of crisis communication competence and what aspects of it need more attention. The research findings indicate that co-producing safety with citizen groups demands crisis communication competence related to message production, message reception, and interaction between experts and citizen groups. In addition, the findings clarify what areas of crisis communication competence need to be further developed to facilitate co-operation between experts and citizen groups. However, the authors suggest that crisis communication competence should not be seen solely as a characteristic of individual crisis communicators but approached as a networked and co-created area of competence.

  18. On-line core monitoring with CORE MASTER / PRESTO

    International Nuclear Information System (INIS)

    Lindahl, S.O.; Borresen, S.; Ovrum, S.

    1986-01-01

    Advanced calculational tools are instrumental in improving reactor plant capacity factors and fuel utilization. The computer code package CORE MASTER is an integrated system designed to achieve this objective. The system covers all main activities in the area of in-core fuel management for boiling water reactors; design, operation support, and on-line core monitoring. CORE MASTER operates on a common data base, which defines the reactor and documents the operating history of the core and of all fuel bundles ever used

  19. Void coefficient of reactivity calculation for AP-600 core

    International Nuclear Information System (INIS)

    Suparlina, L.; Budiono, T.A.; Mardha, A.; Tukiran

    1998-01-01

    Void coefficient of reactivity as one of reactor kinetics parameters has been carried out. The calculation was done into two steps which is cell calculation using WIMSD/4 and core calculation using Batan-2DIFF code programs with the condition of beginning of cycle with all fresh fuels elements and all control rods withdrawn. The one dimension transport program in four neutron energy groups is used to calculate the cell generation of various core materials cell has been calculated in 1/4 fuel element with cluster model and square pitch arrange. Moderator density have been reduced until 20% for the void coefficient of reactivity calculation. Macroscopic cross-section as the out put of WIMSD/4 is being used as the input at the diffusion neutron program for core calculation. The void coefficient of reactivity of the AP-600 core can be determined with regular neutron flux and adjoint in four energy groups and X-Y geometry. The results is shown that the K eff calculation value is different 5.2% from the design data

  20. Theory of transformation groups I general properties of continuous transformation groups a contemporary approach and translation

    CERN Document Server

    2015-01-01

    This modern translation of Sophus Lie's and Friedrich Engel's “Theorie der Transformationsgruppen Band I” will allow readers to discover the striking conceptual clarity and remarkably systematic organizational thought of the original German text. Volume I presents a comprehensive introduction to the theory and is mainly directed towards the generalization of ideas drawn from the study of examples. The major part of the present volume offers an extremely clear translation of the lucid original. The first four chapters provide not only a translation, but also a contemporary approach, which will help present day readers to familiarize themselves with the concepts at the heart of the subject. The editor's main objective was to encourage a renewed interest in the detailed classification of Lie algebras in dimensions 1, 2 and 3, and to offer access to Sophus Lie's monumental Galois theory of continuous transformation groups, established at the end of the 19th Century. Lie groups are widespread in mathematics, p...

  1. CORE STABILIZATION PROGRAM AND CONVENTIONAL EXERCISES IN THE PATIENTS WITH LOW BACK PAIN-A COMPARATIVE STUDY

    Directory of Open Access Journals (Sweden)

    Dr. Venkata Naga Prahalada Karnati

    2015-02-01

    Full Text Available Background: Conventional back care exercises are advocated to treat the pain and to strengthen the involved muscles. There will always be the possibility of the pain getting recurred due to disproportionate balance and stability in the muscles. The core stabilization is major trend in rehabilitation. It aims at improving stability during functional activities, balance, flexibility, strength training and effectively manage the pain as well. Methods: Forty patients with chronic Mechanical Low back pain were randomly assigned into control group that received conventional back exercises and SWD (n=20, experimental group received core stabilization and SWD (n=20. Both the groups received SWD, along with conventional back exercises for one-group and core stabilization for the other group 3 days a week for 6 weeks .The treatment outcome was assessed using visual analogue scale, Rolland Morris Disability Questionnaire and Lumbar range of motion by using goniometer. Results: After a 6 week training period the core stabilization group scored significantly higher than the conventional group for VAS (p=0.05 and RMDQ (p=0.05 where as ROM improved higher in conventional group (p=0.05 Conclusion: After the treatment sessions Core stabilization group registered a significant improvement when compared to conventional back care exercises in improving function and in relieving pain.

  2. Two-dimensional full-core transport theory Benchmarks for the WWER reactors

    International Nuclear Information System (INIS)

    Petkov, P.T.

    2002-01-01

    Several two-dimensional full-core real geometry many-group steady-state problems for the WWER-440 and WWER-1000 reactors have been solved by the MARIKO code, based on the method of characteristics. The reference transport theory solutions include assembly-wise and pin-wise power distributions. Homogenized two-group diffusion parameters and discontinuity factors have been calculated by MARIKO for each assembly type both for the whole assembly and for each cell in the smallest sector of symmetry, using the B1 method for calculation of the critical spectrum. Accurate albedo-type boundary conditions have been calculated by MARIKO for the core-reflector and core-absorber boundaries, both for each outer assembly face and for each outer cell face. Comparison with the reference solutions of the two-group nodal diffusion code SPPS-1.6 and the few-group fine-mesh diffusion codes HEX2DA and HEX2DB are presented (Authors)

  3. Core Thermal-Hydraulic Conceptual Design for the Advanced SFR Design Concepts

    International Nuclear Information System (INIS)

    Cho, Chung Ho; Chang, Jin Wook; Yoo, Jae Woon; Song, Hoon; Choi, Sun Rock; Park, Won Seok; Kim, Sang Ji

    2010-01-01

    The Korea Atomic Energy Research Institute (KAERI) has developed the advanced SFR design concepts from 2007 to 2009 under the National longterm Nuclear R and D Program. Two types of core designs, 1,200 MWe breakeven and 600 MWe TRU burner core have been proposed and evaluated whether they meet the design requirements for the Gen IV technology goals of sustainability, safety and reliability, economics, proliferation resistance, and physical protection. In generally, the core thermal hydraulic design is performed during the conceptual design phase to efficiently extract the core thermal power by distributing the appropriate sodium coolant flow according to the power of each assembly because the conventional SFR core is composed of hundreds of ducted assemblies with hundreds of fuel rods. In carrying out the thermal and hydraulic design, special attention has to be paid to several performance parameters in order to assure proper performance and safety of fuel and core; the coolant boiling, fuel melting, structural integrity of the components, fuel-cladding eutectic melting, etc. The overall conceptual design procedure for core thermal and hydraulic conceptual design, i.e., flow grouping and peak pin temperature calculations, pressure drop calculations, steady-state and detailed sub-channel analysis is shown Figure 1. In the conceptual design phase, results of core thermal-hydraulic design for advanced design concepts, the core flow grouping, peak pin cladding mid-wall temperature, and pressure drop calculations, are summarized in this study

  4. Test-Access Planning and Test Scheduling for Embedded Core-Based System Chips

    OpenAIRE

    Goel, Sandeep Kumar

    2005-01-01

    Advances in the semiconductor process technology enable the creation of a complete system on one single die, the so-called system chip or SOC. To reduce time-to-market for large SOCs, reuse of pre-designed and pre-veried blocks called cores is employed. Like the design style, testing of SOCs can be best approached in a core-based fashion. In order to enable core-based test development, an embedded core should be isolated from its surrounding circuitry and electrical test access from chip pins...

  5. Modulational Instability in Linearly Coupled Asymmetric Dual-Core Fibers

    Directory of Open Access Journals (Sweden)

    Arjunan Govindarajan

    2017-06-01

    Full Text Available We investigate modulational instability (MI in asymmetric dual-core nonlinear directional couplers incorporating the effects of the differences in effective mode areas and group velocity dispersions, as well as phase- and group-velocity mismatches. Using coupled-mode equations for this system, we identify MI conditions from the linearization with respect to small perturbations. First, we compare the MI spectra of the asymmetric system and its symmetric counterpart in the case of the anomalous group-velocity dispersion (GVD. In particular, it is demonstrated that the increase of the inter-core linear-coupling coefficient leads to a reduction of the MI gain spectrum in the asymmetric coupler. The analysis is extended for the asymmetric system in the normal-GVD regime, where the coupling induces and controls the MI, as well as for the system with opposite GVD signs in the two cores. Following the analytical consideration of the MI, numerical simulations are carried out to explore nonlinear development of the MI, revealing the generation of periodic chains of localized peaks with growing amplitudes, which may transform into arrays of solitons.

  6. Modified solvothermal synthesis and characterization of CdS/ZnS core/shell nanorods

    International Nuclear Information System (INIS)

    Baby Suganthi, A.R.; Sagayaraj, P.

    2013-01-01

    Core/shell CdS/ZnS nanorods were synthesized using a two-step solvothermal approach. The first step is the formation of CdS nanoparticles initiated using nucleation followed by growth through coalescence-exchange and particle coagulation. The second step leads to the formation of ZnS and further coalescence-exchange leading to deposition and growth of a ZnS shell around CdS nanoparticles. The structural, morphological and chemical studies were performed using X-ray diffraction, Energy Dispersive X-ray spectroscopy (EDX) Scanning electron Microscopy (SEM), UV–vis absorption spectra and Transmission Electron Microscopy (TEM), provide direct evidence for shell growth. The present synthesis provides a rational approach to the design of novel core/shell nanomaterials with appealing applications in optoelectronic devices. - Graphical abstract: From the resulting TEM images, the formation of core/shell could be observed. The apparent microscopy contrast between the CdS core and the ZnS shell offers evidence for the formation of CdS/ZnS core/shell nanostructures. It is clearly evident that the surfaces of the nanorods became rough after coating and also the diameter of the nanorod is seen increased up to 40–50 nm. Highlights: ► CdS/ZnS core/shell nanorods were synthesized using two-step solvothermal approach. ► The nanoparticles were characterized by XRD, EDX, SEM, UV–vis and TEM. ► SEM images revealed the surface roughness after ZnS shell growth. ► TEM microscopy offers evidence for the formation of core/shell nanostructures

  7. Identification of Core Competencies for an Undergraduate Food Safety Curriculum Using a Modified Delphi Approach

    Science.gov (United States)

    Johnston, Lynette M.; Wiedmann, Martin; Orta-Ramirez, Alicia; Oliver, Haley F.; Nightingale, Kendra K.; Moore, Christina M.; Stevenson, Clinton D.; Jaykus, Lee-Ann

    2014-01-01

    Identification of core competencies for undergraduates in food safety is critical to assure courses and curricula are appropriate in maintaining a well-qualified food safety workforce. The purpose of this study was to identify and refine core competencies relevant to postsecondary food safety education using a modified Delphi method. Twenty-nine…

  8. Restraint system for core elements of a reactor core

    International Nuclear Information System (INIS)

    Class, G.

    1975-01-01

    In a nuclear reactor, a core element bundle formed of a plurality of side-by-side arranged core elements is surrounded by restraining elements that exert a radially inwardly directly restraining force generating friction forces between the core elements in a restraining plane that is transverse to the core element axes. The adjoining core elements are in rolling contact with one another in the restraining plane by virtue of rolling-type bearing elements supported in the core elements. (Official Gazette)

  9. A Group Theoretic Approach to Metaheuristic Local Search for Partitioning Problems

    Science.gov (United States)

    2005-05-01

    Tabu Search. Mathematical and Computer Modeling 39: 599-616. 107 Daskin , M.S., E. Stern. 1981. A Hierarchical Objective Set Covering Model for EMS... A Group Theoretic Approach to Metaheuristic Local Search for Partitioning Problems by Gary W. Kinney Jr., B.G.S., M.S. Dissertation Presented to the...DISTRIBUTION STATEMENT A Approved for Public Release Distribution Unlimited The University of Texas at Austin May, 2005 20050504 002 REPORT

  10. Genetic diversity and population structure analysis to construct a core collection from a large Capsicum germplasm.

    Science.gov (United States)

    Lee, Hea-Young; Ro, Na-Young; Jeong, Hee-Jin; Kwon, Jin-Kyung; Jo, Jinkwan; Ha, Yeaseong; Jung, Ayoung; Han, Ji-Woong; Venkatesh, Jelli; Kang, Byoung-Cheorl

    2016-11-14

    Conservation of genetic diversity is an essential prerequisite for developing new cultivars with desirable agronomic traits. Although a large number of germplasm collections have been established worldwide, many of them face major difficulties due to large size and a lack of adequate information about population structure and genetic diversity. Core collection with a minimum number of accessions and maximum genetic diversity of pepper species and its wild relatives will facilitate easy access to genetic material as well as the use of hidden genetic diversity in Capsicum. To explore genetic diversity and population structure, we investigated patterns of molecular diversity using a transcriptome-based 48 single nucleotide polymorphisms (SNPs) in a large germplasm collection comprising 3,821 accessions. Among the 11 species examined, Capsicum annuum showed the highest genetic diversity (H E  = 0.44, I = 0.69), whereas the wild species C. galapagoense showed the lowest genetic diversity (H E  = 0.06, I = 0.07). The Capsicum germplasm collection was divided into 10 clusters (cluster 1 to 10) based on population structure analysis, and five groups (group A to E) based on phylogenetic analysis. Capsicum accessions from the five distinct groups in an unrooted phylogenetic tree showed taxonomic distinctness and reflected their geographic origins. Most of the accessions from European countries are distributed in the A and B groups, whereas the accessions from Asian countries are mainly distributed in C and D groups. Five different sampling strategies with diverse genetic clustering methods were used to select the optimal method for constructing the core collection. Using a number of allelic variations based on 48 SNP markers and 32 different phenotypic/morphological traits, a core collection 'CC240' with a total of 240 accessions (5.2 %) was selected from within the entire Capsicum germplasm. Compared to the other core collections, CC240 displayed higher

  11. The online simulation of core physics in nuclear power plant

    International Nuclear Information System (INIS)

    Zhao Qiang

    2005-01-01

    The three-dimensional power distribution in core is one of the most important status variables of nuclear reactor. In order to monitor the 3-D in core power distribution timely and accurately, the online simulation system of core physics was designed in the paper. This system combines core physics simulation with the data, which is from the plant and reactor instrumentation. The design of the system consists of the hardware part and the software part. The online simulation system consists of a main simulation computer and a simulation operation station. The online simulation system software includes of the real-time simulation support software, the system communication software, the simulation program and the simulation interface software. Two-group and three-dimensional neutron kinetics model with six groups delayed neutrons was used in the real-time simulation of nuclear reactor core physics. According to the characteristics of the nuclear reactor, the core was divided into many nodes. Resolving the neutron equation, the method of separate variables was used. The input data from the plant and reactor instrumentation system consist of core thermal power, loop temperatures and pressure, control rod positions, boron concentration, core exit thermocouple data, Excore detector signals, in core flux detectors signals. There are two purposes using the data, one is to ensure that the model is as close as the current actual reactor condition, and the other is to calibrate the calculated power distribution. In this paper, the scheme of the online simulation system was introduced. Under the real-time simulation support system, the simulation program is being compiled. Compared with the actual operational data, the elementary simulation results were reasonable and correct. (author)

  12. Toward whole-core neutron transport without spatial homogenization

    International Nuclear Information System (INIS)

    Lewis, E. E.

    2009-01-01

    Full text of publication follows: A long-term goal of computational reactor physics is the deterministic analysis of power reactor core neutronics without incurring significant discretization errors in the energy, spatial or angular variables. In principle, given large enough parallel configurations with unlimited CPU time and memory, this goal could be achieved using existing three-dimensional neutron transport codes. In practice, however, solving the Boltzmann equation for neutrons over the six-dimensional phase space is made intractable by the nature of neutron cross-sections and the complexity and size of power reactor cores. Tens of thousands of energy groups would be required for faithful cross section representation. Likewise, the numerous material interfaces present in power reactor lattices require exceedingly fine spatial mesh structures; these ubiquitous interfaces preclude effective implementation of adaptive grid, mesh-less methods and related techniques that have been applied so successfully in other areas of engineering science. These challenges notwithstanding, substantial progress continues in the pursuit for more robust deterministic methods for whole-core neutronics analysis. This paper examines the progress over roughly the last decade, emphasizing the space-angle variables and the quest to eliminate errors attributable to spatial homogenization. As prolog we briefly assess 1990's methods used in light water reactor analysis and review the lessons learned from the C5G7 benchmark exercises which were originated in 1999 to appraise the ability of transport codes to perform core calculations without homogenization. We proceed by examining progress over the last decade much of which falls into three areas. These may be broadly characterized as reduced homogenization, dynamic homogenization and planar-axial synthesis. In the first, homogenization in three-dimensional calculations is reduced from the fuel assembly to the pin-cell level. In the second

  13. COMSORS: A light water reactor chemical core catcher

    International Nuclear Information System (INIS)

    Forsberg, C.W.; Parker, G.W.; Rudolph, J.C.; Osborne-Lee, I.W.

    1997-01-01

    The Core-Melt Source Reduction System (COMSORS) is a new approach to terminate lightwater reactor (LWR) core-melt accidents and ensure containment integrity. A special dissolution glass made of lead oxide (PbO) and boron oxide (B 2 O 3 ) is placed under the reactor vessel. If molten core debris is released onto the glass, the following sequence happens: (1) the glass absorbs decay heat as its temperature increases and the glass softens; (2) the core debris dissolves into the molten glass; (3) molten glass convective currents create a homogeneous high-level waste (HLW) glass; (4) the molten glass spreads into a wider pool, distributing the heat for removal by radiation to the reactor cavity above or transfer to water on top of the molten glass; and (5) the glass solidifies as increased surface cooling area and decreasing radioactive decay heat generation allows heat removal to exceed heat generation

  14. Potts ferromagnet correlation length in hypercubic lattices: Renormalization - group approach

    International Nuclear Information System (INIS)

    Curado, E.M.F.; Hauser, P.R.

    1984-01-01

    Through a real space renormalization group approach, the q-state Potts ferromagnet correlation length on hierarchical lattices is calculated. These hierarchical lattices are build in order to simulate hypercubic lattices. The high-and-low temperature correlation length asymptotic behaviours tend (in the Ising case) to the Bravais lattice correlation length ones when the size of the hierarchical lattice cells tends to infinity. It is conjectured that the asymptotic behaviours several values of q and d (dimensionality) so obtained are correct. Numerical results are obtained for the full temperature range of the correlation length. (Author) [pt

  15. Initial Comparison of Direct and Legacy Modeling Approaches for Radial Core Expansion Analysis

    International Nuclear Information System (INIS)

    Shemon, Emily R.

    2016-01-01

    Radial core expansion in sodium-cooled fast reactors provides an important reactivity feedback effect. As the reactor power increases due to normal start up conditions or accident scenarios, the core and surrounding materials heat up, causing both grid plate expansion and bowing of the assembly ducts. When the core restraint system is designed correctly, the resulting structural deformations introduce negative reactivity which decreases the reactor power. Historically, an indirect procedure has been used to estimate the reactivity feedback due to structural deformation which relies upon perturbation theory and coupling legacy physics codes with limited geometry capabilities. With advancements in modeling and simulation, radial core expansion phenomena can now be modeled directly, providing an assessment of the accuracy of the reactivity feedback coefficients generated by indirect legacy methods. Recently a new capability was added to the PROTEUS-SN unstructured geometry neutron transport solver to analyze deformed meshes quickly and directly. By supplying the deformed mesh in addition to the base configuration input files, PROTEUS-SN automatically processes material adjustments including calculation of region densities to conserve mass, calculation of isotopic densities according to material models (for example, sodium density as a function of temperature), and subsequent re-homogenization of materials. To verify the new capability of directly simulating deformed meshes, PROTEUS-SN was used to compute reactivity feedback for a series of contrived yet representative deformed configurations for the Advanced Burner Test Reactor design. The indirect legacy procedure was also performed to generate reactivity feedback coefficients for the same deformed configurations. Interestingly, the legacy procedure consistently overestimated reactivity feedbacks by 35% compared to direct simulations by PROTEUS-SN. This overestimation indicates that the legacy procedures are in fact

  16. Initial Comparison of Direct and Legacy Modeling Approaches for Radial Core Expansion Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Shemon, Emily R. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-10-10

    Radial core expansion in sodium-cooled fast reactors provides an important reactivity feedback effect. As the reactor power increases due to normal start up conditions or accident scenarios, the core and surrounding materials heat up, causing both grid plate expansion and bowing of the assembly ducts. When the core restraint system is designed correctly, the resulting structural deformations introduce negative reactivity which decreases the reactor power. Historically, an indirect procedure has been used to estimate the reactivity feedback due to structural deformation which relies upon perturbation theory and coupling legacy physics codes with limited geometry capabilities. With advancements in modeling and simulation, radial core expansion phenomena can now be modeled directly, providing an assessment of the accuracy of the reactivity feedback coefficients generated by indirect legacy methods. Recently a new capability was added to the PROTEUS-SN unstructured geometry neutron transport solver to analyze deformed meshes quickly and directly. By supplying the deformed mesh in addition to the base configuration input files, PROTEUS-SN automatically processes material adjustments including calculation of region densities to conserve mass, calculation of isotopic densities according to material models (for example, sodium density as a function of temperature), and subsequent re-homogenization of materials. To verify the new capability of directly simulating deformed meshes, PROTEUS-SN was used to compute reactivity feedback for a series of contrived yet representative deformed configurations for the Advanced Burner Test Reactor design. The indirect legacy procedure was also performed to generate reactivity feedback coefficients for the same deformed configurations. Interestingly, the legacy procedure consistently overestimated reactivity feedbacks by 35% compared to direct simulations by PROTEUS-SN. This overestimation indicates that the legacy procedures are in fact

  17. Computational models of stellar collapse and core-collapse supernovae

    International Nuclear Information System (INIS)

    Ott, Christian D; O'Connor, Evan; Schnetter, Erik; Loeffler, Frank; Burrows, Adam; Livne, Eli

    2009-01-01

    Core-collapse supernovae are among Nature's most energetic events. They mark the end of massive star evolution and pollute the interstellar medium with the life-enabling ashes of thermonuclear burning. Despite their importance for the evolution of galaxies and life in the universe, the details of the core-collapse supernova explosion mechanism remain in the dark and pose a daunting computational challenge. We outline the multi-dimensional, multi-scale, and multi-physics nature of the core-collapse supernova problem and discuss computational strategies and requirements for its solution. Specifically, we highlight the axisymmetric (2D) radiation-MHD code VULCAN/2D and present results obtained from the first full-2D angle-dependent neutrino radiation-hydrodynamics simulations of the post-core-bounce supernova evolution. We then go on to discuss the new code Zelmani which is based on the open-source HPC Cactus framework and provides a scalable AMR approach for 3D fully general-relativistic modeling of stellar collapse, core-collapse supernovae and black hole formation on current and future massively-parallel HPC systems. We show Zelmani's scaling properties to more than 16,000 compute cores and discuss first 3D general-relativistic core-collapse results.

  18. Seismic Wave Velocity in Earth's Shallow Core

    Science.gov (United States)

    Alexandrakis, C.; Eaton, D. W.

    2008-12-01

    Studies of the outer core indicate that it is composed of liquid Fe and Ni alloyed with a ~10% fraction of light elements such as O, S or Si. Recently, unusual features, such as sediment accumulation, immiscible fluid layers or stagnant convection, have been predicted in the shallow core region. Secular cooling and compositional buoyancy drive vigorous convection that sustains the geodynamo, although critical details of light-element composition and thermal regime remain uncertain. Seismic velocity models can provide important constraints on the light element composition, however global reference models, such as Preliminary Reference Earth Model (PREM), IASP91 and AK135 vary significantly in the 200 km below the core-mantle boundary. Past studies of the outermost core velocity structure have been hampered by traveltime uncertainties due to lowermost mantle heterogeneities. The recently published Empirical Transfer Function (ETF) method has been shown to reduce the uncertainty using a waveform stacking approach to improve global observations of SmKS teleseismic waves. Here, we apply the ETF method to achieve a precise top-of-core velocity measurement of 8.05 ± 0.03 km/s. This new model accords well with PREM. Since PREM is based on the adiabatic form of the Adams-Williamson equation, it assumes a well mixed (i.e. homogeneous) composition. This result suggests a lack of heterogeneity in the outermost core due to layering or stagnant convection.

  19. Core design concepts for high performance light water reactors

    International Nuclear Information System (INIS)

    Schulenberg, T.; Starflinger, J.

    2007-01-01

    Light water reactors operated under supercritical pressure conditions have been selected as one of the promising future reactor concepts to be studied by the Generation IV International Forum. Whereas the steam cycle of such reactors can be derived from modern fossil fired power plants, the reactor itself, and in particular the reactor core, still need to be developed. Different core design concepts shall be described here to outline the strategy. A first option for near future applications is a pressurized water reactor with 380 .deg. C core exit temperature, having a closed primary loop and achieving 2% pts. higher net efficiency and 24% higher specific turbine power than latest pressurized water reactors. More efficiency and turbine power can be gained from core exit temperatures around 500 .deg. C, which require a multi step heat up process in the core with intermediate coolant mixing, achieving up to 44% net efficiency. The paper summarizes different core and assembly design approaches which have been studied recently for such High Performance Light Water Reactors

  20. EFFECTIVENESS OF SWISS BALL VS FLOOR EXERCISES ON CORE MUSCLE STRENGTH IN ELITE CRICKETERS

    Directory of Open Access Journals (Sweden)

    K. Sai sudha

    2015-10-01

    Full Text Available Background: Cricket is one of the most popular game in India played by men and women of all ages. The increased physical demands on the players may be associated with an increased risk of injuries. Core muscle strength is important to prevent risk of injuries in elite cricketers. The beginners in the cricket must have enough strength of core muscles, as core is the bridge between upper and lower limbs. So, it should be strong enough to prevent low back and lower limb injuries in cricketers. The aim is to determine the effectiveness of swiss ball exercises versus floor exercises on core muscle strength in elite cricketers. The objective is to study and compare the effectiveness of swiss ball exercises and floor exercises in elite cricketers in terms of back strength. Method: The total number of students in this study were 30 eilte cricketers between 16-25 years out of which 15 subjects were included each in floor exercise(n=15 and swiss ball group(n=15. Back strength was measured before and after the intervention of 6 weeks using isokinetic analyser. Results: After the analysis, the results revealed significant improvement of back strength in both the groups(p< 0.00. The swiss ball group showed significant results when compared with floor exercise group. Conclusion: Although the study showed beneficial results in both the groups, the results reflected that swiss ball group had better improvement of core muscle strength than the floor exercise group.

  1. An ethnographic investigation of healthcare providers' approaches to facilitating person-centredness in group-based diabetes education.

    Science.gov (United States)

    Stenov, Vibeke; Hempler, Nana Folmann; Reventlow, Susanne; Wind, Gitte

    2017-08-22

    To investigate approaches among healthcare providers (HCPs) that support or hinder person-centredness in group-based diabetes education programmes targeting persons with type 2 diabetes. Ethnographic fieldwork in a municipal and a hospital setting in Denmark. The two programmes included 21 participants and 10 HCPs and were observed over 5 weeks. Additionally, 10 in-depth semi-structured interviews were conducted with patients (n = 7) and HCPs (n = 3). Data were analysed using systematic text condensation. Hindering approaches included a teacher-centred focus on delivering disease-specific information. Communication was dialog based, but HCPs primarily asked closed-ended questions with one correct answer. Additional hindering approaches included ignoring participants with suboptimal health behaviours and a tendency to moralize that resulted in feelings of guilt among participants. Supporting approaches included letting participants set the agenda using broad, open-ended questions. Healthcare providers are often socialized into a biomedical approach and trained to be experts. However, person-centredness involves redefined roles and responsibilities. Applying person-centredness in practice requires continuous training and supervision, but HCPs often have minimum support for developing person-centred communication skills. Techniques based on motivational communication, psychosocial methods and facilitating group processes are effective person-centred approaches in a group context. Teacher-centredness undermined person-centredness because HCPs primarily delivered disease-specific recommendations, leading to biomedical information overload for participants. © 2017 Nordic College of Caring Science.

  2. Another Nibble at the Core: Student Learning in a Thematically-Focused Introductory Sociology Course

    Science.gov (United States)

    Howard, Jay R.; Novak, Katherine B.; Cline, Krista M. C.; Scott, Marvin B.

    2014-01-01

    Identifying and assessing core knowledge has been and continues to be a challenge that vexes the discipline of sociology. With the adoption of a thematic approach to courses in the core curriculum at Butler University, faculty teaching Introductory Sociology were presented with the opportunity and challenge of defining the core knowledge and…

  3. New Frontiers in Analyzing Dynamic Group Interactions: Bridging Social and Computer Science.

    Science.gov (United States)

    Lehmann-Willenbrock, Nale; Hung, Hayley; Keyton, Joann

    2017-10-01

    This special issue on advancing interdisciplinary collaboration between computer scientists and social scientists documents the joint results of the international Lorentz workshop, "Interdisciplinary Insights into Group and Team Dynamics," which took place in Leiden, The Netherlands, July 2016. An equal number of scholars from social and computer science participated in the workshop and contributed to the papers included in this special issue. In this introduction, we first identify interaction dynamics as the core of group and team models and review how scholars in social and computer science have typically approached behavioral interactions in groups and teams. Next, we identify key challenges for interdisciplinary collaboration between social and computer scientists, and we provide an overview of the different articles in this special issue aimed at addressing these challenges.

  4. Student perceptions of independent versus facilitated small group learning approaches to compressed medical anatomy education.

    Science.gov (United States)

    Whelan, Alexander; Leddy, John J; Mindra, Sean; Matthew Hughes, J D; El-Bialy, Safaa; Ramnanan, Christopher J

    2016-01-01

    The purpose of this study was to compare student perceptions regarding two, small group learning approaches to compressed (46.5 prosection-based laboratory hours), integrated anatomy education at the University of Ottawa medical program. In the facilitated active learning (FAL) approach, tutors engage students and are expected to enable and balance both active learning and progression through laboratory objectives. In contrast, the emphasized independent learning (EIL) approach stresses elements from the "flipped classroom" educational model: prelaboratory preparation, independent laboratory learning, and limited tutor involvement. Quantitative (Likert-style questions) and qualitative data (independent thematic analysis of open-ended commentary) from a survey of students who had completed the preclerkship curriculum identified strengths from the EIL (promoting student collaboration and communication) and FAL (successful progression through objectives) approaches. However, EIL led to student frustration related to a lack of direction and impaired completion of objectives, whereas active learning opportunities in FAL were highly variable and dependent on tutor teaching style. A "hidden curriculum" was also identified, where students (particularly EIL and clerkship students) commonly compared their compressed anatomy education or their anatomy learning environment with other approaches. Finally, while both groups highly regarded the efficiency of prosection-based learning and expressed value for cadaveric-based learning, student commentary noted that the lack of grade value dedicated to anatomy assessment limited student accountability. This study revealed critical insights into small group learning in compressed anatomy education, including the need to balance student active learning opportunities with appropriate direction and feedback (including assessment). © 2015 American Association of Anatomists.

  5. Environment-based pin-power reconstruction method for homogeneous core calculations

    International Nuclear Information System (INIS)

    Leroyer, H.; Brosselard, C.; Girardi, E.

    2012-01-01

    Core calculation schemes are usually based on a classical two-step approach associated with assembly and core calculations. During the first step, infinite lattice assemblies calculations relying on a fundamental mode approach are used to generate cross-sections libraries for PWRs core calculations. This fundamental mode hypothesis may be questioned when dealing with loading patterns involving several types of assemblies (UOX, MOX), burnable poisons, control rods and burn-up gradients. This paper proposes a calculation method able to take into account the heterogeneous environment of the assemblies when using homogeneous core calculations and an appropriate pin-power reconstruction. This methodology is applied to MOX assemblies, computed within an environment of UOX assemblies. The new environment-based pin-power reconstruction is then used on various clusters of 3x3 assemblies showing burn-up gradients and UOX/MOX interfaces, and compared to reference calculations performed with APOLLO-2. The results show that UOX/MOX interfaces are much better calculated with the environment-based calculation scheme when compared to the usual pin-power reconstruction method. The power peak is always better located and calculated with the environment-based pin-power reconstruction method on every cluster configuration studied. This study shows that taking into account the environment in transport calculations can significantly improve the pin-power reconstruction so far as it is consistent with the core loading pattern. (authors)

  6. Fire resistance of extruded hollow-core slabs

    DEFF Research Database (Denmark)

    Hertz, Kristian Dahl; Sørensen, Lars Schiøtt; Giuliani, Luisa

    2017-01-01

    to the structural codes with data derived from a standard fire test and from a thorough examination of the comprehensive test documentation available on fire exposed hollow-core slabs. Findings – Mechanisms for loss of load-bearing capacity are clarified, and evidence of the fire resistance is found. Originality......Purpose – Prefabricated extruded hollow-core slabs are preferred building components for floor structures in several countries. It is therefore important to be able to document the fire resistance of these slabs proving fulfilment of standard fire resistance requirements of 60 and 120 min found...... in most national building regulations. The paper aims to present a detailed analysis of the mechanisms responsible for the loss of loadbearing capacity of hollow-core slabs when exposed to fire. Design/methodology/approach – Furthermore, it compares theoretica calculation and assessment according...

  7. Categorization by Groups

    NARCIS (Netherlands)

    R.W. Hamilton (Rebecca); S. Puntoni (Stefano); N.T. Tavassoli (Nader)

    2006-01-01

    textabstractCategorization is a core psychological process central to consumer and managerial decision-making. While a substantial amount of research has been conducted to examine individual categorization behaviors, relatively little is known about the group categorization process. In two

  8. Full Core TREAT Kinetics Demonstration Using Rattlesnake/BISON Coupling Within MAMMOTH

    Energy Technology Data Exchange (ETDEWEB)

    Ortensi, Javier [Idaho National Lab. (INL), Idaho Falls, ID (United States); DeHart, Mark D. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Gleicher, Frederick N. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Wang, Yaqi [Idaho National Lab. (INL), Idaho Falls, ID (United States); Alberti, Anthony L. [Oregon State Univ., Corvallis, OR (United States); Palmer, Todd S. [Oregon State Univ., Corvallis, OR (United States)

    2015-08-01

    This report summarizes key aspects of research in evaluation of modeling needs for TREAT transient simulation. Using a measured TREAT critical measurement and a transient for a small, experimentally simplified core, Rattlesnake and MAMMOTH simulations are performed building from simple infinite media to a full core model. Cross sections processing methods are evaluated, various homogenization approaches are assessed and the neutronic behavior of the core studied to determine key modeling aspects. The simulation of the minimum critical core with the diffusion solver shows very good agreement with the reference Monte Carlo simulation and the experiment. The full core transient simulation with thermal feedback shows a significantly lower power peak compared to the documented experimental measurement, which is not unexpected in the early stages of model development.

  9. Pilates based core stability training in ambulant individuals with multiple sclerosis: protocol for a multi-centre randomised controlled trial

    OpenAIRE

    Freeman, Jennifer; Fox, Esther; Gear, Margaret; Hough, Alan

    2012-01-01

    Abstract Background People with Multiple Sclerosis (MS) frequently experience balance and mobility impairments, including reduced trunk stability. Pilates-based core stability training, which is aimed at improving control of the body's stabilising muscles, is popular as a form of exercise with people with MS and therapists. A replicated single case series study facilitated by the Therapists in MS Group in the United Kingdom (UK) provides preliminary evidence that this approach can improve bal...

  10. Improving the Grade Point Average of Our At-Risk Students: A Collaborative Group Action Research Approach.

    Science.gov (United States)

    Saurino, Dan R.; Hinson, Kenneth; Bouma, Amy

    This paper focuses on the use of a group action research approach to help student teachers develop strategies to improve the grade point average of at-risk students. Teaching interventions such as group work and group and individual tutoring were compared to teaching strategies already used in the field. Results indicated an improvement in the…

  11. 3D core burnup studies in 500 MWe Indian prototype fast breeder reactor to attain enhanced core burnup

    International Nuclear Information System (INIS)

    Choudhry, Nakul; Riyas, A.; Devan, K.; Mohanakrishnan, P.

    2013-01-01

    Highlights: ► Enhanced burnup potential of existing prototype fast breeder reactor core is studied. ► By increasing the Pu enrichment, fuel burnup can be increased in existing PFBR core. ► Enhanced burnup increase economy and reduce load of fuel fabrication and reprocessing. ► Beginning of life reactivity is suppressed by increasing the number of diluents. ► Absorber rod worth requirements can be achieved by increasing 10 B enrichment. -- Abstract: Fast breeder reactors are capable of producing high fuel burnup because of higher internal breeding of fissile material and lesser parasitic capture of neutrons in the core. As these reactors need high fissile enrichment, high fuel burnup is desirable to be cost effective and to reduce the load on fuel reprocessing and fabrication plants. A pool type, liquid sodium cooled, mixed (Pu–U) oxide fueled 500 MWe prototype fast breeder reactor (PFBR), under construction at Kalpakkam is designed for a peak burnup of 100 GWd/t. This limitation on burnup is purely due to metallurgical properties of structural materials like clad and hexcan to withstand high neutron fluence, and not by the limitation on the excess reactivity available in the core. The 3D core burnup studies performed earlier for approach to equilibrium core of PFBR is continued to demonstrate the burnup potential of existing PFBR core. To increase the fuel burnup of PFBR, plutonium oxide enrichment is increased from 20.7%/27.7% to 22.1%/29.4% of core-1/core-2 which resulted in cycle length increase from 180 to 250 effective full power days (efpd), so that the peak fuel burnup increases from 100 to 134 GWd/t, keeping all the core parameters under allowed safety limits. Number of diluents subassemblies is increased from eight to twelve at beginning of life core to bring down the initial core excess reactivity. PFBR refueling is revised to accommodate twelve diluents. Increase of 10 B enrichment in control safety rods (CSRs) and diverse safety rods (DSRs

  12. Preliminary analysis of the proposed BN-600 benchmark core

    International Nuclear Information System (INIS)

    John, T.M.

    2000-01-01

    The Indira Gandhi Centre for Atomic Research is actively involved in the design of Fast Power Reactors in India. The core physics calculations are performed by the computer codes that are developed in-house or by the codes obtained from other laboratories and suitably modified to meet the computational requirements. The basic philosophy of the core physics calculations is to use the diffusion theory codes with the 25 group nuclear cross sections. The parameters that are very sensitive is the core leakage, like the power distribution at the core blanket interface etc. are calculated using transport theory codes under the DSN approximations. All these codes use the finite difference approximation as the method to treat the spatial variation of the neutron flux. Criticality problems having geometries that are irregular to be represented by the conventional codes are solved using Monte Carlo methods. These codes and methods have been validated by the analysis of various critical assemblies and calculational benchmarks. Reactor core design procedure at IGCAR consists of: two and three dimensional diffusion theory calculations (codes ALCIALMI and 3DB); auxiliary calculations, (neutron balance, power distributions, etc. are done by codes that are developed in-house); transport theory corrections from two dimensional transport calculations (DOT); irregular geometry treated by Monte Carlo method (KENO); cross section data library used CV2M (25 group)

  13. Critical experiments on enriched uranium graphite moderated cores

    International Nuclear Information System (INIS)

    Kaneko, Yoshihiko; Akino, Fujiyoshi; Kitadate, Kenji; Kurokawa, Ryosuke

    1978-07-01

    A variety of 20 % enriched uranium loaded and graphite-moderated cores consisting of the different lattice cells in a wide range of the carbon to uranium atomic ratio have been built at Semi-Homogeneous Critical Experimental Assembly (SHE) to perform the critical experiments systematically. In the present report, the experimental results for homogeneously or heterogeneously fuel loaded cores and for simulation core of the experimental reactor for a multi-purpose high temperature reactor are filed so as to be utilized for evaluating the accuracy of core design calculation for the experimental reactor. The filed experimental data are composed of critical masses of uranium, kinetic parameters, reactivity worths of the experimental control rods and power distributions in the cores with those rods. Theoretical analyses are made for the experimental data by adopting a simple ''homogenized cylindrical core model'' using the nuclear data of ENDF/B-III, which treats the neutron behaviour after smearing the lattice cell structure. It is made clear from a comparison between the measurement and the calculation that the group constants and fundamental methods of calculations, based on this theoretical model, are valid for the homogeneously fuel loaded cores, but not for both of the heterogeneously fuel loaded cores and the core for simulation of the experimental reactor. Then, it is pointed out that consideration to semi-homogeneous property of the lattice cells for reactor neutrons is essential for high temperature graphite-moderated reactors using dispersion fuel elements of graphite and uranium. (author)

  14. Single-mode fiber laser based on core-cladding mode conversion.

    Science.gov (United States)

    Suzuki, Shigeru; Schülzgen, Axel; Peyghambarian, N

    2008-02-15

    A single-mode fiber laser based on an intracavity core-cladding mode conversion is demonstrated. The fiber laser consists of an Er-doped active fiber and two fiber Bragg gratings. One Bragg grating is a core-cladding mode converter, and the other Bragg grating is a narrowband high reflector that selects the lasing wavelength. Coupling a single core mode and a single cladding mode by the grating mode converter, the laser operates as a hybrid single-mode laser. This approach for designing a laser cavity provides a much larger mode area than conventional large-mode-area step-index fibers.

  15. The use of "vertical integration groups" to help define and update course/clerkship content.

    Science.gov (United States)

    Nierenberg, D W

    1998-10-01

    Faculty at many medical schools are working hard to improve the quality of their curricula. While the world "curriculum" means different things to different people, curricular change often includes improving the structure of the teaching/learning environment (e.g., seminars or problem-based learning groups vs lectures), the content of courses and clerkships (the core set of knowledge, skills, and attitudes that should be learned), and the manner in which student learning of knowledge and skills is evaluated (the sense that evaluation can help "drive" the curriculum). The author describes how "vertical integration groups" have been used over four years at Dartmouth Medical School to improve and modernize the content of courses and clerkships. In this approach, students and faculty work together to address and improve content areas that normally are not associated with traditional, discipline-centered courses or clerkships. The author discusses the advantages of this approach, the challenges encountered during implementation, and examples of how the approach has been put into action.

  16. Multi-core System Architecture for Safety-critical Control Applications

    DEFF Research Database (Denmark)

    Li, Gang

    and size, and high power consumption. Increasing the frequency of a processor is becoming painful now due to the explosive power consumption. Furthermore, components integrated into a single-core processor have to be certified to the highest SIL, due to that no isolation is provided in a traditional single...... certification cost. Meanwhile, hardware platforms with improved processing power are required to execute the applications of larger size. To tackle the two issues mentioned above, the state of the art approaches are using more Electronic Control Units (ECU) in a federated architecture or increasing......-core processor. A promising alternative to improve processing power and provide isolation is to adopt a multi-core architecture with on-chip isolation. In general, a specific multi-core architecture can facilitate the development and certification of safety-related systems, due to its physical isolation between...

  17. A New Approach to Group Learning

    Science.gov (United States)

    Parsons, Jerry

    1976-01-01

    To help teachers plan strategy for working with a learning group, 12 factors affecting a learning group are discussed and a series of check points are identified as criteria for evaluation. Concepts and principles of group dynamics are drawn from sociology and the work of Carl Rogers. (Author/AJ)

  18. Development of a core outcome set for orthodontic trials using a mixed-methods approach: protocol for a multicentre study.

    Science.gov (United States)

    Tsichlaki, Aliki; O'Brien, Kevin; Johal, Ama; Marshman, Zoe; Benson, Philip; Colonio Salazar, Fiorella B; Fleming, Padhraig S

    2017-08-04

    Orthodontic treatment is commonly undertaken in young people, with over 40% of children in the UK needing treatment and currently one third having treatment, at a cost to the National Health Service in England and Wales of £273 million each year. Most current research about orthodontic care does not consider what patients truly feel about, or want, from treatment, and a diverse range of outcomes is being used with little consistency between studies. This study aims to address these problems, using established methodology to develop a core outcome set for use in future clinical trials of orthodontic interventions in children and young people. This is a mixed-methods study incorporating four distinct stages. The first stage will include a scoping review of the scientific literature to identify primary and secondary outcome measures that have been used in previous orthodontic clinical trials. The second stage will involve qualitative interviews and focus groups with orthodontic patients aged 10 to 16 years to determine what outcomes are important to them. The outcomes elicited from these two stages will inform the third stage of the study in which a long-list of outcomes will be ranked in terms of importance using electronic Delphi surveys involving clinicians and patients. The final stage of the study will involve face-to-face consensus meetings with all stakeholders to discuss and agree on the outcome measures that should be included in the final core outcome set. This research will help to inform patients, parents, clinicians and commissioners about outcomes that are important to young people undergoing orthodontic treatment. Adoption of the core outcome set in future clinical trials of orthodontic treatment will make it easier for results to be compared, contrasted and combined. This should translate into improved decision-making by all stakeholders involved. The project has been registered on the Core Outcome Measures in Effectiveness Trials ( COMET ) website

  19. The treatment of mixing in core helium-burning models - III. Suppressing core breathing pulses with a new constraint on overshoot

    Science.gov (United States)

    Constantino, Thomas; Campbell, Simon W.; Lattanzio, John C.

    2017-12-01

    Theoretical predictions for the core helium burning phase of stellar evolution are highly sensitive to the uncertain treatment of mixing at convective boundaries. In the last few years, interest in constraining the uncertain structure of their deep interiors has been renewed by insights from asteroseismology. Recently, Spruit proposed a limit for the rate of growth of helium-burning convective cores based on the higher buoyancy of material ingested from outside the convective core. In this paper we test the implications of such a limit for stellar models with a range of initial mass and metallicity. We find that the constraint on mixing beyond the Schwarzschild boundary has a significant effect on the evolution late in core helium burning, when core breathing pulses occur and the ingestion rate of helium is fastest. Ordinarily, core breathing pulses prolong the core helium burning lifetime to such an extent that models are at odds with observations of globular cluster populations. Across a wide range of initial stellar masses (0.83 ≤ M/M⊙ ≤ 5), applying the Spruit constraint reduces the core helium burning lifetime because core breathing pulses are either avoided or their number and severity reduced. The constraint suggested by Spruit therefore helps to resolve significant discrepancies between observations and theoretical predictions. Specifically, we find improved agreement for R2 (the observed ratio of asymptotic giant branch to horizontal branch stars in globular clusters), the luminosity difference between these two groups, and in asteroseismology, the mixed-mode period spacing detected in red clump stars in the Kepler field.

  20. Adaptive Core Simulation Employing Discrete Inverse Theory - Part II: Numerical Experiments

    International Nuclear Information System (INIS)

    Abdel-Khalik, Hany S.; Turinsky, Paul J.

    2005-01-01

    Use of adaptive simulation is intended to improve the fidelity and robustness of important core attribute predictions such as core power distribution, thermal margins, and core reactivity. Adaptive simulation utilizes a selected set of past and current reactor measurements of reactor observables, i.e., in-core instrumentation readings, to adapt the simulation in a meaningful way. The companion paper, ''Adaptive Core Simulation Employing Discrete Inverse Theory - Part I: Theory,'' describes in detail the theoretical background of the proposed adaptive techniques. This paper, Part II, demonstrates several computational experiments conducted to assess the fidelity and robustness of the proposed techniques. The intent is to check the ability of the adapted core simulator model to predict future core observables that are not included in the adaption or core observables that are recorded at core conditions that differ from those at which adaption is completed. Also, this paper demonstrates successful utilization of an efficient sensitivity analysis approach to calculate the sensitivity information required to perform the adaption for millions of input core parameters. Finally, this paper illustrates a useful application for adaptive simulation - reducing the inconsistencies between two different core simulator code systems, where the multitudes of input data to one code are adjusted to enhance the agreement between both codes for important core attributes, i.e., core reactivity and power distribution. Also demonstrated is the robustness of such an application

  1. Enhanced Core Noise Modeling for Turbofan Engines

    Science.gov (United States)

    Stone, James R.; Krejsa, Eugene A.; Clark, Bruce J.

    2011-01-01

    This report describes work performed by MTC Technologies (MTCT) for NASA Glenn Research Center (GRC) under Contract NAS3-00178, Task Order No. 15. MTCT previously developed a first-generation empirical model that correlates the core/combustion noise of four GE engines, the CF6, CF34, CFM56, and GE90 for General Electric (GE) under Contract No. 200-1X-14W53048, in support of GRC Contract NAS3-01135. MTCT has demonstrated in earlier noise modeling efforts that the improvement of predictive modeling is greatly enhanced by an iterative approach, so in support of NASA's Quiet Aircraft Technology Project, GRC sponsored this effort to improve the model. Since the noise data available for correlation are total engine noise spectra, it is total engine noise that must be predicted. Since the scope of this effort was not sufficient to explore fan and turbine noise, the most meaningful comparisons must be restricted to frequencies below the blade passage frequency. Below the blade passage frequency and at relatively high power settings jet noise is expected to be the dominant source, and comparisons are shown that demonstrate the accuracy of the jet noise model recently developed by MTCT for NASA under Contract NAS3-00178, Task Order No. 10. At lower power settings the core noise became most apparent, and these data corrected for the contribution of jet noise were then used to establish the characteristics of core noise. There is clearly more than one spectral range where core noise is evident, so the spectral approach developed by von Glahn and Krejsa in 1982 wherein four spectral regions overlap, was used in the GE effort. Further analysis indicates that the two higher frequency components, which are often somewhat masked by turbomachinery noise, can be treated as one component, and it is on that basis that the current model is formulated. The frequency scaling relationships are improved and are now based on combustor and core nozzle geometries. In conjunction with the Task

  2. Core lifter

    Energy Technology Data Exchange (ETDEWEB)

    Pavlov, N G; Edel' man, Ya A

    1981-02-15

    A core lifter is suggested which contains a housing, core-clamping elements installed in the housing depressions in the form of semirings with projections on the outer surface restricting the rotation of the semirings in the housing depressions. In order to improve the strength and reliability of the core lifter, the semirings have a variable transverse section formed from the outside by the surface of the rotation body of the inner arc of the semiring aroung the rotation axis and from the inner a cylindrical surface which is concentric to the outer arc of the semiring. The core-clamping elements made in this manner have the possibility of freely rotating in the housing depressions under their own weight and from contact with the core sample. These semirings do not have weakened sections, have sufficient strength, are inserted into the limited ring section of the housing of the core lifter without reduction in its through opening and this improve the reliability of the core lifter in operation.

  3. Side core lifter

    Energy Technology Data Exchange (ETDEWEB)

    Edelman, Ya A

    1982-01-01

    A side core lifter is proposed which contains a housing with guide slits and a removable core lifter with side projections on the support section connected to the core receiver. In order to preserve the structure of the rock in the core sample by means of guaranteeing rectilinear movement of the core lifter in the rock, the support and core receiver sections are hinged. The device is equipped with a spring for angular shift in the core-reception part.

  4. Computational models of stellar collapse and core-collapse supernovae

    Energy Technology Data Exchange (ETDEWEB)

    Ott, Christian D; O' Connor, Evan [TAPIR, Mailcode 350-17, California Institute of Technology, Pasadena, CA (United States); Schnetter, Erik; Loeffler, Frank [Center for Computation and Technology, Louisiana State University, Baton Rouge, LA (United States); Burrows, Adam [Department of Astrophysical Sciences, Princeton University, Princeton, NJ (United States); Livne, Eli, E-mail: cott@tapir.caltech.ed [Racah Institute of Physics, Hebrew University, Jerusalem (Israel)

    2009-07-01

    Core-collapse supernovae are among Nature's most energetic events. They mark the end of massive star evolution and pollute the interstellar medium with the life-enabling ashes of thermonuclear burning. Despite their importance for the evolution of galaxies and life in the universe, the details of the core-collapse supernova explosion mechanism remain in the dark and pose a daunting computational challenge. We outline the multi-dimensional, multi-scale, and multi-physics nature of the core-collapse supernova problem and discuss computational strategies and requirements for its solution. Specifically, we highlight the axisymmetric (2D) radiation-MHD code VULCAN/2D and present results obtained from the first full-2D angle-dependent neutrino radiation-hydrodynamics simulations of the post-core-bounce supernova evolution. We then go on to discuss the new code Zelmani which is based on the open-source HPC Cactus framework and provides a scalable AMR approach for 3D fully general-relativistic modeling of stellar collapse, core-collapse supernovae and black hole formation on current and future massively-parallel HPC systems. We show Zelmani's scaling properties to more than 16,000 compute cores and discuss first 3D general-relativistic core-collapse results.

  5. Core@shell Nanoparticles: Greener Synthesis Using Natural Plant Products

    Directory of Open Access Journals (Sweden)

    Mehrdad Khatami

    2018-03-01

    Full Text Available Among an array of hybrid nanoparticles, core-shell nanoparticles comprise of two or more materials, such as metals and biomolecules, wherein one of them forms the core at the center, while the other material/materials that were located around the central core develops a shell. Core-shell nanostructures are useful entities with high thermal and chemical stability, lower toxicity, greater solubility, and higher permeability to specific target cells. Plant or natural products-mediated synthesis of nanostructures refers to the use of plants or its extracts for the synthesis of nanostructures, an emerging field of sustainable nanotechnology. Various physiochemical and greener methods have been advanced for the synthesis of nanostructures, in contrast to conventional approaches that require the use of synthetic compounds for the assembly of nanostructures. Although several biological resources have been exploited for the synthesis of core-shell nanoparticles, but plant-based materials appear to be the ideal candidates for large-scale green synthesis of core-shell nanoparticles. This review summarizes the known strategies for the greener production of core-shell nanoparticles using plants extract or their derivatives and highlights their salient attributes, such as low costs, the lack of dependence on the use of any toxic materials, and the environmental friendliness for the sustainable assembly of stabile nanostructures.

  6. Group B Strep Infection in Newborns

    Science.gov (United States)

    ... Bacterial Core surveillance (ABCs) CDC Streptococcus Laboratory Sepsis Group B Strep Infection in Newborns Language: English Español ( ... Explains the difference between early- and late-onset group B strep diseases in newborns… How it Spreads ...

  7. Core mechanics and configuration behavior of advanced LMFBR core restraint concepts

    International Nuclear Information System (INIS)

    Fox, J.N.; Wei, B.C.

    1978-02-01

    Core restraint systems in LMFBRs maintain control of core mechanics and configuration behavior. Core restraint design is complex due to the close spacing between adjacent components, flux and temperature gradients, and irradiation-induced material property effects. Since the core assemblies interact with each other and transmit loads directly to the core restraint structural members, the core assemblies themselves are an integral part of the core restraint system. This paper presents an assessment of several advanced core restraint system and core assembly concepts relative to the expected performance of currently accepted designs. A recommended order for the development of the advanced concepts is also presented

  8. Core Stability Exercise Versus General Exercise for Chronic Low Back Pain.

    Science.gov (United States)

    Coulombe, Brian J; Games, Kenneth E; Neil, Elizabeth R; Eberman, Lindsey E

    2017-01-01

    Reference: Wang XQ, Zheng JJ, Yu ZW, et al. A meta-analysis of core stability exercise versus general exercise for chronic low back pain. PLoS One. 2012;7(12):e52082. Clinical Questions: Is core stability exercise more effective than general exercise in the treatment of patients with nonspecific low back pain (LBP)?  The authors searched the following databases: China Biological Medicine disc, Cochrane Library, Embase, and PubMed from 1970 through 2011. The key medical subject headings searched were chronic pain, exercise, LBP, lumbosacral region, and sciatica.  Randomized controlled trials comparing core stability exercise with general exercise in the treatment of chronic LBP were investigated. Participants were male and female adults with LBP for at least 3 months that was not caused by a specific known condition. A control group receiving general exercise and an experimental group receiving core stability exercise were required for inclusion in the meta-analysis. Core stability was defined as the ability to ensure a stable neutral spine position, but the type of exercise was not specified. Outcome measures of pain intensity, back-specific functional status, quality of life, and work absenteeism were recorded at 3-, 6-, and 12-month intervals.  The study design, participant information, description of interventions in the control and experimental groups, outcome measures, and follow-up period were extracted. The mean difference (MD) and 95% confidence interval (CI) were calculated to evaluate statistical significance. Risk of bias was assessed using the Cochrane Collaboration Recommendations, and all articles were rated as high risk for other bias with no further explanation given.  Five studies involving 414 patients were included. Four studies assessed pain intensity using the visual analog scale or numeric rating scale. In the core stability exercise group, the reduction in pain was significant at 3 months (MD = -1.29, 95% CI = -2.47, -0.11; P

  9. Multilateral approaches to the nuclear fuel cycle. Expert group report to the Director General of the IAEA

    International Nuclear Information System (INIS)

    2005-04-01

    An international expert group has been appointed to consider options for possible multilateral approaches to the nuclear fuel cycle. The terms of reference for the Expert Group were to: 1)Identify and provide an analysis of issues and options relevant to multilateral approaches to the front and back ends of the nuclear fuel cycle; 2)Provide an overview of the policy, legal, security, economic and technological incentives and disincentives for cooperation in multilateral arrangements for the front and back ends of the nuclear fuel cycle; and 3)Provide a brief review of the historical and current experience in this area, and of the various analyses relating to multilateral fuel cycle arrangements relevant to the work of the Expert Group. The Group examined the nuclear fuel cycle and multinational approaches at meetings convened over a seven month period. Their report, presented in the paper, was released on 22 February 2005, and circulated for discussion among the IAEA Member States, as well as others, as an IAEA Information Circular (INFCIRC/640)

  10. Finite element program ARKAS: verification for IAEA benchmark problem analysis on core-wide mechanical analysis of LMFBR cores

    International Nuclear Information System (INIS)

    Nakagawa, M.; Tsuboi, Y.

    1990-01-01

    ''ARKAS'' code verification, with the problems set in the International Working Group on Fast Reactors (IWGFR) Coordinated Research Programme (CRP) on the inter-comparison between liquid metal cooled fast breeder reactor (LMFBR) Core Mechanics Codes, is discussed. The CRP was co-ordinated by the IWGFR around problems set by Dr. R.G. Anderson (UKAEA) and arose from the IWGFR specialists' meeting on The Predictions and Experience of Core Distortion Behaviour (ref. 2). The problems for the verification (''code against code'') and validation (''code against experiment'') were set and calculated by eleven core mechanics codes from nine countries. All the problems have been completed and were solved with the core structural mechanics code ARKAS. Predictions by ARKAS agreed very well with other solutions for the well-defined verification problems. For the validation problems based on Japanese ex-reactor 2-D thermo-elastic experiments, the agreements between measured and calculated values were fairly good. This paper briefly describes the numerical model of the ARKAS code, and discusses some typical results. (author)

  11. Core stabilization exercise with real-time feedback for chronic hemiparetic stroke: a pilot randomized controlled trials.

    Science.gov (United States)

    Chung, Eunjung; Lee, Byoung-Hee; Hwang, Sujin

    2014-01-01

    The purpose of this study was to examine the feasibility of core stabilization exercise with real-time feedback on balance and gait function in patients with chronic hemiparetic stroke. Nineteen stroke subjects were enrolled in this study. The patients were randomly divided into the experimental (n = 10) and control groups (n = 9). Subjects in the experimental group performed core stabilization exercise with real-time feedback training for 30 minutes per day during a period of six weeks. Subjects in the control group performed core stabilization exercise during the same period. This study assessed the kinematic parameters using a portable walkway system, and timed up-and-go test. Gait velocity showed significantly greater improvement in the experimental group (7.3 ± 5.0 sec) than in the control group (-0.7 ± 10.6). Stride length showed significantly greater increase in the experimental group (13.2 ± 7.9 on the affected side and 12.6 ± 8.0 on the less affected side) than the control group (3.5 ± 8.7 on the affected side and 3.4 ± 8.5 on the less affected side). After training, change in results on the timed up and go test was significantly greater in the experimental group than in the control group. Core stabilization exercise using real-time feedback produces greater improvement in gait performance in chronic hemiparetic stroke patients than core stabilization exercise only.

  12. An expert system for PWR core operation management

    Energy Technology Data Exchange (ETDEWEB)

    Ida, Toshio; Masuda, Masahiro; Nishioka, Hiromasa

    1988-01-01

    Planning for restartup after planned or unplanned reactor shutdown and load-follow operations is an important task in the core operation management of pressurized water reactors (PWRs). These planning problems have been solved by planning experts using their expertise and the computational prediction of core behavior. Therefore, the quality of the plan and the time consumed in the planning depend heavily on the skillfulness of the planning experts. A knowledge engineering approach has been recently considered as a promising means to solve such complicated planning problems. Many knowledge-based systems have been developed so far, and some of them have already been applied because of their effectiveness. The expert system REPLEX has been developed to aid core management engineers in making a successful plan for the restartup or the load-follow operation of PWRs within a shorter time. It can maintain planning tasks at a high-quality level independent of the skillfulness of core management engineers and enhance the efficiency of management. REPLEX has an explanation function that helps user understanding of plans. It could be a useful took, therefore, for the training of core management engineers.

  13. An expert system for PWR core operation management

    International Nuclear Information System (INIS)

    Ida, Toshio; Masuda, Masahiro; Nishioka, Hiromasa.

    1988-01-01

    Planning for restartup after planned or unplanned reactor shutdown and load-follow operations is an important task in the core operation management of pressurized water reactors (PWRs). These planning problems have been solved by planning experts using their expertise and the computational prediction of core behavior. Therefore, the quality of the plan and the time consumed in the planning depend heavily on the skillfulness of the planning experts. A knowledge engineering approach has been recently considered as a promising means to solve such complicated planning problems. Many knowledge-based systems have been developed so far, and some of them have already been applied because of their effectiveness. The expert system REPLEX has been developed to aid core management engineers in making a successful plan for the restartup or the load-follow operation of PWRs within a shorter time. It can maintain planning tasks at a high-quality level independent of the skillfulness of core management engineers and enhance the efficiency of management. REPLEX has an explanation function that helps user understanding of plans. It could be a useful took, therefore, for the training of core management engineers

  14. TURBULENCE DECAY AND CLOUD CORE RELAXATION IN MOLECULAR CLOUDS

    International Nuclear Information System (INIS)

    Gao, Yang; Law, Chung K.; Xu, Haitao

    2015-01-01

    The turbulent motion within molecular clouds is a key factor controlling star formation. Turbulence supports molecular cloud cores from evolving to gravitational collapse and hence sets a lower bound on the size of molecular cloud cores in which star formation can occur. On the other hand, without a continuous external energy source maintaining the turbulence, such as in molecular clouds, the turbulence decays with an energy dissipation time comparable to the dynamic timescale of clouds, which could change the size limits obtained from Jean's criterion by assuming constant turbulence intensities. Here we adopt scaling relations of physical variables in decaying turbulence to analyze its specific effects on the formation of stars. We find that the decay of turbulence provides an additional approach for Jeans' criterion to be achieved, after which gravitational infall governs the motion of the cloud core. This epoch of turbulence decay is defined as cloud core relaxation. The existence of cloud core relaxation provides a more complete understanding of the effect of the competition between turbulence and gravity on the dynamics of molecular cloud cores and star formation

  15. Improvements in EBR-2 core depletion calculations

    International Nuclear Information System (INIS)

    Finck, P.J.; Hill, R.N.; Sakamoto, S.

    1991-01-01

    The need for accurate core depletion calculations in Experimental Breeder Reactor No. 2 (EBR-2) is discussed. Because of the unique physics characteristics of EBR-2, it is difficult to obtain accurate and computationally efficient multigroup flux predictions. This paper describes the effect of various conventional and higher order schemes for group constant generation and for flux computations; results indicate that higher-order methods are required, particularly in the outer regions (i.e. the radial blanket). A methodology based on Nodal Equivalence Theory (N.E.T.) is developed which allows retention of the accuracy of a higher order solution with the computational efficiency of a few group nodal diffusion solution. The application of this methodology to three-dimensional EBR-2 flux predictions is demonstrated; this improved methodology allows accurate core depletion calculations at reasonable cost. 13 refs., 4 figs., 3 tabs

  16. Field and laboratory investigations of coring-induced damage in core recovered from Marker Bed 139 at the waste isolation pilot plant underground facility

    International Nuclear Information System (INIS)

    Holcomb, D.J.; Zeuch, D.H.; Morin, K.; Hardy, R.; Tormey, T.V.

    1995-09-01

    A combined laboratory and field investigation was carried out to determine the extent of coring-induced damage done to samples cored from Marker Bed 139 at the WIPP site. Coring-induced damage, if present, has the potential to significantly change the properties of the material used for laboratory testing relative to the in situ material properties, resulting in misleading conclusions. In particular, connected, crack-like damage could make the permeability of cored samples orders of magnitude greater than the in situ permeabilities. Our approach compared in situ velocity and resistivity measurements with laboratory measurements of the same properties. Differences between in situ and laboratory results could be attributed to differences in the porosity due to cracks. The question of the origin of the changes could not be answered directly from the results of the measurements. Pre-existing cracks, held closed by the in situ stress, could open when the core was cut free, or new cracks could be generated by coring-induced damage. We used core from closely spaced boreholes at three orientations (0 degree, ±45 degrees relative to vertical) to address the origin of cracks. The absolute orientation of pre-existing cracks would be constant, independent of the borehole orientation. In contrast, cracks induced by coring were expected to show an orientation dependent on that of the source borehole

  17. Field and laboratory investigations of coring-induced damage in core recovered from Marker Bed 139 at the waste isolation pilot plant underground facility

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, D.J.; Zeuch, D.H.; Morin, K.; Hardy, R.; Tormey, T.V.

    1995-09-01

    A combined laboratory and field investigation was carried out to determine the extent of coring-induced damage done to samples cored from Marker Bed 139 at the WIPP site. Coring-induced damage, if present, has the potential to significantly change the properties of the material used for laboratory testing relative to the in situ material properties, resulting in misleading conclusions. In particular, connected, crack-like damage could make the permeability of cored samples orders of magnitude greater than the in situ permeabilities. Our approach compared in situ velocity and resistivity measurements with laboratory measurements of the same properties. Differences between in situ and laboratory results could be attributed to differences in the porosity due to cracks. The question of the origin of the changes could not be answered directly from the results of the measurements. Pre-existing cracks, held closed by the in situ stress, could open when the core was cut free, or new cracks could be generated by coring-induced damage. We used core from closely spaced boreholes at three orientations (0{degree}, {plus_minus}45{degrees} relative to vertical) to address the origin of cracks. The absolute orientation of pre-existing cracks would be constant, independent of the borehole orientation. In contrast, cracks induced by coring were expected to show an orientation dependent on that of the source borehole.

  18. Earth's Outer Core Properties Estimated Using Bayesian Inversion of Normal Mode Eigenfrequencies

    Science.gov (United States)

    Irving, J. C. E.; Cottaar, S.; Lekic, V.

    2016-12-01

    The outer core is arguably Earth's most dynamic region, and consists of an iron-nickel liquid with an unknown combination of lighter alloying elements. Frequencies of Earth's normal modes provide the strongest constraints on the radial profiles of compressional wavespeed, VΦ, and density, ρ, in the outer core. Recent great earthquakes have yielded new normal mode measurements; however, mineral physics experiments and calculations are often compared to the Preliminary reference Earth model (PREM), which is 35 years old and does not provide uncertainties. Here we investigate the thermo-elastic properties of the outer core using Earth's free oscillations and a Bayesian framework. To estimate radial structure of the outer core and its uncertainties, we choose to exploit recent datasets of normal mode centre frequencies. Under the self-coupling approximation, centre frequencies are unaffected by lateral heterogeneities in the Earth, for example in the mantle. Normal modes are sensitive to both VΦ and ρ in the outer core, with each mode's specific sensitivity depending on its eigenfunctions. We include a priori bounds on outer core models that ensure compatibility with measurements of mass and moment of inertia. We use Bayesian Monte Carlo Markov Chain techniques to explore different choices in parameterizing the outer core, each of which represents different a priori constraints. We test how results vary (1) assuming a smooth polynomial parametrization, (2) allowing for structure close to the outer core's boundaries, (3) assuming an Equation-of-State and adiabaticity and inverting directly for thermo-elastic parameters. In the second approach we recognize that the outer core may have distinct regions close to the core-mantle and inner core boundaries and investigate models which parameterize the well mixed outer core separately from these two layers. In the last approach we seek to map the uncertainties directly into thermo-elastic parameters including the bulk

  19. Core-shell magnetic nanowires fabrication and characterization

    Energy Technology Data Exchange (ETDEWEB)

    Kalska-Szostko, B., E-mail: kalska@uwb.edu.pl [Institute of Chemistry, University of Bialystok, Ciolkowskiego 1K, 15-245 Bialystok (Poland); Faculty of Physics, University of Bialystok, Ciolkowskiego 1L, 15-245 Bialystok, Poland (Poland); Klekotka, U.; Satuła, D. [Institute of Chemistry, University of Bialystok, Ciolkowskiego 1K, 15-245 Bialystok (Poland); Faculty of Physics, University of Bialystok, Ciolkowskiego 1L, 15-245 Bialystok, Poland (Poland)

    2017-02-28

    Highlights: • New approach for nanowires modification are presented. • Physical and chemical characterization of the nanowires are shown. • Properties modulations as an effect of the surface layer composition are discussed. - Abstract: In this paper, a new way of the preparation of core-shell magnetic nanowires has been proposed. For the modification Fe nanowires were prepared by electrodeposition in anodic aluminium oxide matrixes, in first step. In second, by wetting chemical deposition, shell layers of Ag, Au or Cu were obtained. Resultant core-shell nanowires structure was characterized by X-ray diffraction, infrared spectroscopy, transmission electron microscopy, and energy dispersive x-ray. Whereas magnetic properties by Mössbauer spectroscopy.

  20. How cores grow by pebble accretion. I. Direct core growth

    Science.gov (United States)

    Brouwers, M. G.; Vazan, A.; Ormel, C. W.

    2018-03-01

    Context. Planet formation by pebble accretion is an alternative to planetesimal-driven core accretion. In this scenario, planets grow by the accretion of cm- to m-sized pebbles instead of km-sized planetesimals. One of the main differences with planetesimal-driven core accretion is the increased thermal ablation experienced by pebbles. This can provide early enrichment to the planet's envelope, which influences its subsequent evolution and changes the process of core growth. Aims: We aim to predict core masses and envelope compositions of planets that form by pebble accretion and compare mass deposition of pebbles to planetesimals. Specifically, we calculate the core mass where pebbles completely evaporate and are absorbed before reaching the core, which signifies the end of direct core growth. Methods: We model the early growth of a protoplanet by calculating the structure of its envelope, taking into account the fate of impacting pebbles or planetesimals. The region where high-Z material can exist in vapor form is determined by the temperature-dependent vapor pressure. We include enrichment effects by locally modifying the mean molecular weight of the envelope. Results: In the pebble case, three phases of core growth can be identified. In the first phase (Mcore mixes outwards, slowing core growth. In the third phase (Mcore > 0.5M⊕), the high-Z inner region expands outwards, absorbing an increasing fraction of the ablated material as vapor. Rainout ends before the core mass reaches 0.6 M⊕, terminating direct core growth. In the case of icy H2O pebbles, this happens before 0.1 M⊕. Conclusions: Our results indicate that pebble accretion can directly form rocky cores up to only 0.6 M⊕, and is unable to form similarly sized icy cores. Subsequent core growth can proceed indirectly when the planet cools, provided it is able to retain its high-Z material.

  1. Parental style and vulnerability to depression: the role of core beliefs.

    Science.gov (United States)

    Shah, R; Waller, G

    2000-01-01

    This study considers the potential role of core beliefs (unconditional schema-level representations) in the relationship between recalled parenting in childhood and major depression in adulthood, comparing a group of depressed outpatients (N = 60) with a healthy community sample (N = 67). The depressed group were differentiated by poorer perceived parenting (low care and high overprotection) and by three unhealthy core beliefs (defectiveness/shame, self-sacrifice, and insufficient self-control). Among nonclinical participants, it appears that vulnerability to harm beliefs act as a partial mediator of the relationship between poor paternal care and the development of depressive features. In contrast, a broader set of core beliefs appears to mediate the relationship of maternal bonding and paternal overprotection with depressive symptoms among the depressed group. The findings suggest that clinical work with adults with major depression might need to take account of parental style. Where parents are reported to be uncaring or overprotective, cognitive-behavioral therapy might need to include a schema-focused component.

  2. Core Health Outcomes In Childhood Epilepsy (CHOICE): protocol for the selection of a core outcome set.

    Science.gov (United States)

    Morris, Christopher; Dunkley, Colin; Gibbon, Frances M; Currier, Janet; Roberts, Deborah; Rogers, Morwenna; Crudgington, Holly; Bray, Lucy; Carter, Bernie; Hughes, Dyfrig; Tudur Smith, Catrin; Williamson, Paula R; Gringras, Paul; Pal, Deb K

    2017-11-28

    There is increasing recognition that establishing a core set of outcomes to be evaluated and reported in trials of interventions for particular conditions will improve the usefulness of health research. There is no established core outcome set for childhood epilepsy. The aim of this work is to select a core outcome set to be used in evaluative research of interventions for children with rolandic epilepsy, as an exemplar of common childhood epilepsy syndromes. First we will identify what outcomes should be measured; then we will decide how to measure those outcomes. We will engage relevant UK charities and health professional societies as partners, and convene advisory panels for young people with epilepsy and parents of children with epilepsy. We will identify candidate outcomes from a search for trials of interventions for childhood epilepsy, statutory guidance and consultation with our advisory panels. Families, charities and health, education and neuropsychology professionals will be invited to participate in a Delphi survey following recommended practices in the development of core outcome sets. Participants will be able to recommend additional outcome domains. Over three rounds of Delphi survey participants will rate the importance of candidate outcome domains and state the rationale for their decisions. Over the three rounds we will seek consensus across and between families and health professionals on the more important outcomes. A face-to-face meeting will be convened to ratify the core outcome set. We will then review and recommend ways to measure the shortlisted outcomes using clinical assessment and/or patient-reported outcome measures. Our methodology is a proportionate and pragmatic approach to expediently produce a core outcome set for evaluative research of interventions aiming to improve the health of children with epilepsy. A number of decisions have to be made when designing a study to develop a core outcome set including defining the scope

  3. Uncertainty analysis for the assembly and core simulation of BEAVRS at the HZP conditions

    Energy Technology Data Exchange (ETDEWEB)

    Wan, Chenghui [School of Nuclear Science and Technology, Xi’an Jiaotong University, Xi’an 710049 (China); Cao, Liangzhi, E-mail: caolz@mail.xjtu.edu.cn [School of Nuclear Science and Technology, Xi’an Jiaotong University, Xi’an 710049 (China); Wu, Hongchun [School of Nuclear Science and Technology, Xi’an Jiaotong University, Xi’an 710049 (China); Shen, Wei [School of Nuclear Science and Technology, Xi’an Jiaotong University, Xi’an 710049 (China); Canadian Nuclear Safety Commission, Ottawa, Ontario (Canada)

    2017-04-15

    Highlights: • Uncertainty analysis has been completed based on the “two-step” scheme. • Uncertainty analysis has been performed to BEAVRS at HZP. • For lattice calculations, the few-group constant’s uncertainty was quantified. • For core simulation, uncertainties of k{sub eff} and power distributions were quantified. - Abstract: Based on the “two-step” scheme for the reactor-physics calculations, the capability of uncertainty analysis for the core simulations has been implemented in the UNICORN code, an in-house code for the sensitivity and uncertainty analysis of the reactor-physics calculations. Applying the statistical sampling method, the nuclear-data uncertainties can be propagated to the important predictions of the core simulations. The uncertainties of the few-group constants introduced by the uncertainties of the multigroup microscopic cross sections are quantified first for the lattice calculations; the uncertainties of the few-group constants are then propagated to the core multiplication factor and core power distributions for the core simulations. Up to now, our in-house lattice code NECP-CACTI and the neutron-diffusion solver NECP-VIOLET have been implemented in UNICORN for the steady-state core simulations based on the “two-step” scheme. With NECP-CACTI and NECP-VIOLET, the modeling and simulation of the steady-state BEAVRS benchmark problem at the HZP conditions was performed, and the results were compared with those obtained by CASMO-4E. Based on the modeling and simulation, the UNICORN code has been applied to perform the uncertainty analysis for BAEVRS at HZP. The uncertainty results of the eigenvalues and two-group constants for the lattice calculations and the multiplication factor and the power distributions for the steady-state core simulations are obtained and analyzed in detail.

  4. Uncertainty analysis for the assembly and core simulation of BEAVRS at the HZP conditions

    International Nuclear Information System (INIS)

    Wan, Chenghui; Cao, Liangzhi; Wu, Hongchun; Shen, Wei

    2017-01-01

    Highlights: • Uncertainty analysis has been completed based on the “two-step” scheme. • Uncertainty analysis has been performed to BEAVRS at HZP. • For lattice calculations, the few-group constant’s uncertainty was quantified. • For core simulation, uncertainties of k_e_f_f and power distributions were quantified. - Abstract: Based on the “two-step” scheme for the reactor-physics calculations, the capability of uncertainty analysis for the core simulations has been implemented in the UNICORN code, an in-house code for the sensitivity and uncertainty analysis of the reactor-physics calculations. Applying the statistical sampling method, the nuclear-data uncertainties can be propagated to the important predictions of the core simulations. The uncertainties of the few-group constants introduced by the uncertainties of the multigroup microscopic cross sections are quantified first for the lattice calculations; the uncertainties of the few-group constants are then propagated to the core multiplication factor and core power distributions for the core simulations. Up to now, our in-house lattice code NECP-CACTI and the neutron-diffusion solver NECP-VIOLET have been implemented in UNICORN for the steady-state core simulations based on the “two-step” scheme. With NECP-CACTI and NECP-VIOLET, the modeling and simulation of the steady-state BEAVRS benchmark problem at the HZP conditions was performed, and the results were compared with those obtained by CASMO-4E. Based on the modeling and simulation, the UNICORN code has been applied to perform the uncertainty analysis for BAEVRS at HZP. The uncertainty results of the eigenvalues and two-group constants for the lattice calculations and the multiplication factor and the power distributions for the steady-state core simulations are obtained and analyzed in detail.

  5. Peer mentoring for core medical trainees: uptake and impact.

    Science.gov (United States)

    Webb, Jessica; Brightwell, Alexandra; Sarkar, Pamela; Rabbie, Roy; Chakravorty, Indranil

    2015-04-01

    To assess the uptake and impact of a peer mentoring scheme for core medical trainees on both mentors and mentees. All second year core medical trainees in the Southwest London Training programme in September 2012 were invited to mentor a first year core medical trainee. In parallel, all first year core medical trainees were invited to be mentored. Both potential mentors and mentees were asked to submit personal statements, to attend a three-session mentoring training programme and to be matched into mentoring pairs. The impact of the mentoring scheme on trainees' behaviour and outlook was assessed through questionnaires distributed at the start and at the end of the year. 31 of 72 (43%) core medical trainees submitted personal statements and 40 of 72 (56%) attended training sessions. 42 trainees (58%) participated in the scheme (21 mentor/mentee pairs were established). Of the trainees who participated, 23 of 42 (55%) completed the end of year questionnaire. Participating trainees viewed the scheme positively. Reported benefits included changes in their behaviour and acquiring transferable skills that might help them in later career roles, such as an educational supervisor. The end of year questionnaire was sent to all trainees and 10 responded who had not participated. They were asked why they had not participated and their reasons included lack of time, lack of inclination and a desire for more senior mentors. Their suggestions for improvement included more structured sessions to allow the mentor/mentee pairs to meet. This simple peer mentoring scheme was popular despite busy workloads and benefited all concerned. It is a simple effective way of supporting doctors. More work is needed to improve training for mentors and to improve access to mentoring. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  6. The role as moderator and mediator in parent education groups--a leadership and teaching approach model from a parent perspective.

    Science.gov (United States)

    Forslund Frykedal, Karin; Rosander, Michael

    2015-07-01

    To investigate the didactic and social leadership in parent education groups based on a parent perspective, and to conceptualise parent experiences of the leader roles in these groups. Leadership in parent education groups has been associated with a lack of confidence in one's ability to function in that role. Research on how it can be delivered to produce a favourable outcome is scarce. It can be difficult to abandon the role of expert and let participants set their own learning agenda. To facilitate these processes requires leadership skills, knowledge of group dynamics as well as pedagogical skills. Qualitative interview study. Semi-structured interviews with parents (25 participants, 21 interviews). Transcripts were analysed using, first, thematic analysis, then comparative analysis. The study resulted in a four-field model, The Leadership - Teaching Approach model. It consists of the dimensions 'Teaching approaches' ('Knowledge is imparted' and 'Knowledge is jointly constructed'), and 'Leadership approaches' ('Instrumental approach' and 'Investigative approach'). Using an investigative approach is necessary to get a well-functioning group that can help the expectant and new parents in the transition to parenthood. Supervision can help develop an awareness of one's professional role as a nurse and leader of a parent education group. The actions and choices of nurses as leaders of parent groups have an impact on how the participants perceive and take in the content and purpose of the group, and whether they perceive it as meaningful. Getting support in reflecting about one's role as a leader in this context can help create a learning environment in which the participants can become engaged in the activities and be strengthened by the experience. © 2015 John Wiley & Sons Ltd.

  7. Adopting a blended learning approach to teaching evidence based medicine: a mixed methods study

    OpenAIRE

    Ilic, Dragan; Hart, William; Fiddes, Patrick; Misso, Marie; Villanueva, Elmer

    2013-01-01

    Background Evidence Based Medicine (EBM) is a core unit delivered across many medical schools. Few studies have investigated the most effective method of teaching a course in EBM to medical students. The objective of this study was to identify whether a blended-learning approach to teaching EBM is more effective a didactic-based approach at increasing medical student competency in EBM. Methods A mixed-methods study was conducted consisting of a controlled trial and focus groups with second ye...

  8. Core Data Necessary for Reporting Clinical Trials on Nutrition in Infancy

    NARCIS (Netherlands)

    Koletzko, Berthold; Fewtrell, Mary; Gibson, Robert; van Goudoever, Johannes B.; Hernell, Olle; Shamir, Raanan; Szajewska, Hania

    2015-01-01

    This paper presents an updated and revised summary of the 'core data set' that has been proposed to be recorded and reported in all clinical trials on infant nutrition by the recently formed Consensus Group on Outcome Measures Made in Paediatric Enteral Nutrition Clinical Trials (COMMENT). This core

  9. Improvement of Cycle Dependent Core Model for NPP Simulator

    International Nuclear Information System (INIS)

    Song, J. S.; Koo, B. S.; Kim, H. Y. and others

    2003-11-01

    The purpose of this study is to establish automatic core model generation system and to develop 4 cycle real time core analysis methodology with 5% power distribution and 500 pcm reactivity difference criteria for nuclear power plant simulator. The standardized procedure to generate database from ROCS and ANC, which are used for domestic PWR core design, was established for the cycle specific simulator core model generation. An automatic data interface system to generate core model also established. The system includes ARCADIS which edits group constant and DHCGEN which generates interface coupling coefficient correction database. The interface coupling coefficient correction method developed in this study has 4 cycle real time capability and accuracies of which the maximum differences between core design results are within 103 pcm reactivity, 1% relative power distribution and 6% control rod worth. A nuclear power plant core simulation program R-MASTER was developed using the methodology and applied by the concept of distributed client system in simulator. The performance was verified by site acceptance test in Simulator no. 2 in Kori Training Center for 30 initial condition generation and 27 steady state, transient and postulated accident situations

  10. Improvement of Cycle Dependent Core Model for NPP Simulator

    Energy Technology Data Exchange (ETDEWEB)

    Song, J. S.; Koo, B. S.; Kim, H. Y. and others

    2003-11-15

    The purpose of this study is to establish automatic core model generation system and to develop 4 cycle real time core analysis methodology with 5% power distribution and 500 pcm reactivity difference criteria for nuclear power plant simulator. The standardized procedure to generate database from ROCS and ANC, which are used for domestic PWR core design, was established for the cycle specific simulator core model generation. An automatic data interface system to generate core model also established. The system includes ARCADIS which edits group constant and DHCGEN which generates interface coupling coefficient correction database. The interface coupling coefficient correction method developed in this study has 4 cycle real time capability and accuracies of which the maximum differences between core design results are within 103 pcm reactivity, 1% relative power distribution and 6% control rod worth. A nuclear power plant core simulation program R-MASTER was developed using the methodology and applied by the concept of distributed client system in simulator. The performance was verified by site acceptance test in Simulator no. 2 in Kori Training Center for 30 initial condition generation and 27 steady state, transient and postulated accident situations.

  11. Effect of core strength training on dynamic balance and agility in adolescent badminton players.

    Science.gov (United States)

    Ozmen, Tarik; Aydogmus, Mert

    2016-07-01

    The aim of the present study was to investigate effect of core strength training (CST) on core endurance, dynamic balance and agility in adolescent badminton players. Twenty adolescent (age = 10.8 ± 0.3 years; height = 140.6 ± 4.4 cm, weight = 33.9 ± 5.8 kg) badminton players were randomly divided into two groups as training group (TG) and control (CG) group. All subjects were evaluated with Star Excursion Balance Test (SEBT), Illinois Agility Test, and the core endurance tests. The TG completed CST twice a week, for 6 weeks. There were significant increases in (p  0.05). The CST resulted in significant gains in directions of the SEBT and core endurances in adolescent badminton players, but not in agility. Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. Experimental and numerical analysis of fluid - structure interaction effects in a fast reactor core

    International Nuclear Information System (INIS)

    Martelli, A.; Forni, M.; Melloni, R.; Paoluzzi, R.; Bonacina, G.; Castoldi, A.; Zola, M.

    1990-01-01

    Dynamic experiments in air and water (simulating liquid sodium) were performed by ISMES, on behalf of ENEA, on various core element groups of the Italian PEC fast reactor. Bundles of one, seven and nineteen mock-ups reproducing fuel, reflecting and neutron shield elements in full scale were analysed on shaking tables. Tests concerned both groups of equal elements and mixed configurations which corresponded to real core parts. The effects of PEC core-restraint ring were also studied. Seismic excitations of up to 2.5 g were applied to core diagrid. Test results were analysed by use of the one-dimensional program CORALIE and the two-dimensional program CLASH. The study allowed the fluid effects in the PEC core to be evaluated; it also contributed to validation of the above mentioned programs for their general use for fast reactor core analysis. This paper presents the main features of the experimental and the numerical studies and reports comparisons between calculations and measurements. (author)

  13. Transporting TMI-2 core debris to INEL: Public safety and public response

    International Nuclear Information System (INIS)

    Schmitt, R.C.; Reno, H.W.; Young, W.R.; Hamric, J.P.

    1987-01-01

    This paper describes the approach taken by the US Department of Energy to ensure that public safety is maintained during transport of core debris from the Unit-2 reactor at the Three Mile Island Nuclear Power Station near Harrisburg, PA, to the Idaho National Engineering Laboratory near Idaho Falls, ID. It provides up-to-date information about public response to the transport action and discusses DOE's position on several institutional issues. The authors advise that planners of future transport operations be prepared for a multitude of comments from all levels of federal, state, and local governments, special interest groups, and private citizens. They also advise planners to keep meticulous records concerning all informational transactions. 3 figs

  14. Comparison of facility characteristics between SCTF Core-I and Core-II

    International Nuclear Information System (INIS)

    Adachi, Hiromichi; Iwamura, Takamichi; Sobajima, Makoto; Ohnuki, Akira; Abe, Yutaka; Murao, Yoshio.

    1990-08-01

    The Slab Core Test Facility (SCTF) was constructed to investigate two-dimensional thermal-hydraulics in the core and fluid behavior of carryover water out of the core including its feed-back effect to the core behavior mainly during the reflood phase of a large break loss-of-coolant accident (LOCA) of a pressurized water reactor (PWR). Since three simulated cores are used in the SCTF Test Program and the design of these three cores are slightly different one by one, repeatability test is required to justify a direct comparison of data obtained with different cores. In the present report, data of Test S2-13 (Run 618) obtained with SCTF Core-II were compared with those of Test S1-05 (Run 511) obtained with the Core-I, which were performed under the forced-flooding condition. Thermal-hydraulic behaviors in these two tests showed quite similar characteristics of both system behavior and two-dimensional core behaviors. Therefore, the test data obtained from the two cores can be compared directly with each other. After the turnaround of clad temperatures, however, some differences were found in upper plenum water accumulation and resultant two-dimensional core cooling behaviors such as quench front propagation from bottom to top of the core. (author)

  15. Amplified Fragment Length Polymorphism Fingerprinting for Identification of a Core Group of Neisseria gonorrhoeae Transmitters in the Population Attending a Clinic for Treatment of Sexually Transmitted Diseases in Amsterdam, The Netherlands

    OpenAIRE

    Spaargaren, Joke; Stoof, Jeroen; Fennema, Han; Coutinho, Roel; Savelkoul, Paul

    2001-01-01

    Amplified fragment length polymorphism analysis seems well suited for studying the epidemiology of isolates of Neisseria gonorrhoeae obtained from patients attending the Sexually Transmitted Disease Outpatient Clinic in Amsterdam, The Netherlands. It shows potential to identify the core group of transmitters.

  16. Knowledge Economy Core Journals: Identification through LISTA Database Analysis.

    Science.gov (United States)

    Nouri, Rasool; Karimi, Saeed; Ashrafi-rizi, Hassan; Nouri, Azadeh

    2013-03-01

    Knowledge economy has become increasingly broad over the years and identification of core journals in this field can be useful for librarians in journal selection process and also for researchers to select their studies and finding Appropriate Journal for publishing their articles. Present research attempts to determine core journals of Knowledge Economy indexed in LISTA (Library and Information Science and Technology). The research method was bibliometric and research population include the journals indexed in LISTA (From the start until the beginning of 2011) with at least one article a bout "knowledge economy". For data collection, keywords about "knowledge economy"-were extracted from the literature in this area-have searched in LISTA by using title, keyword and abstract fields and also taking advantage of LISTA thesaurus. By using this search strategy, 1608 articles from 390 journals were retrieved. The retrieved records import in to the excel sheet and after that the journals were grouped and the Bradford's coefficient was measured for each group. Finally the average of the Bradford's coefficients were calculated and core journals with subject area of "Knowledge economy" were determined by using Bradford's formula. By using Bradford's scattering law, 15 journals with the highest publication rates were identified as "Knowledge economy" core journals indexed in LISTA. In this list "Library and Information update" with 64 articles was at the top. "ASLIB Proceedings" and "Serials" with 51 and 40 articles are next in rank. Also 41 journals were identified as beyond core that "Library Hi Tech" with 20 articles was at the top. Increased importance of knowledge economy has led to growth of production of articles in this subject area. So the evaluation of journals for ranking these journals becomes a very challenging task for librarians and generating core journal list can provide a useful tool for journal selection and also quick and easy access to information. Core

  17. Application of nursing core competency standard education in the training of nursing undergraduates

    OpenAIRE

    Wu, Fang-qin; Wang, Yan-ling; Wu, Ying; Guo, Ming

    2014-01-01

    Purpose: To evaluate the effectiveness of nursing core competency standard education in undergraduate nursing training. Methods: Forty-two nursing undergraduates from the class of 2007 were recruited as the control group receiving conventional teaching methods, while 31 students from the class of 2008 were recruited as the experimental group receiving nursing core competency standard education. Teaching outcomes were evaluated using comprehensive theoretical knowledge examination and objec...

  18. The Difference Between Clusters and Groups: A Journey from Cluster Cores to Their Outskirts and Beyond

    Science.gov (United States)

    Bower, Richard G.; Balogh, Michael L.

    In this review, we take the reader on a journey. We start by looking at the properties of galaxies in the cores of rich clusters. We have focused on the overall picture: star formation in clusters is strongly suppressed relative to field galaxies at the same redshift. We will argue that the increasing activity and blue populations of clusters with redshift results from a greater level of activity in field galaxies rather than a change in the transformation imposed by the cluster environment. With this in mind, we travel out from the cluster, focusing first on the properties of galaxies in the outskirts of clusters and then on galaxies in isolated groups. At low redshift, we are able to efficiently probe these environments using the Sloan Digital Sky Survey and 2dF redshift surveys. These allow an accurate comparison of galaxy star formation rates in different regions. The current results show a strong suppression of star formation above a critical threshold in local density. The threshold seems similar regardless of the overall mass of the system. At low redshift at least, only galaxies in close, isolated pairs have their star formation rate boosted above the global average. At higher redshift, work on constructing homogeneous catalogs of galaxies in groups and in the infall regions of clusters is still at an early stage. In the final section, we draw these strands together, summarizing what we can deduce about the mechanisms that transform star-forming field galaxies into their quiescent cluster counterparts. We discuss what we can learn about the impact of environment on the global star formation history of the Universe.

  19. Core damage frequency prespectives for BWR 3/4 and Westinghouse 4-loop plants based on IPE results

    International Nuclear Information System (INIS)

    Dingman, S.; Camp, S.; LaChance, J.; Mary Drouin

    1995-01-01

    This paper discusses the core damage frequency (CDF) insights gained by analyzing the results of the Individual Plant Examinations (IPES) for two groups of plants: boiling water reactor (BWR) 3/4 plants with Reactor Core Isolation Cooling systems, and Westinghouse 4-loop plants. Wide variability was observed for the plant CDFs and for the CDFs of the contributing accident classes. On average, transients-with loss of injection, station blackout sequences, and transients with loss of decay heat removal are important contributors for the BWR 3/4 plants, while transients, station blackout sequences, and loss-of-coolant accidents are important for the Westinghouse 4-loop plants. The key factors that contribute to the variability in the results are discussed. The results are often driven by plant-specific design and operational characteristics, but differences in modeling approaches are also important for some accident classes

  20. HardwareSoftware Co-design for Heterogeneous Multi-core Platforms The hArtes Toolchain

    CERN Document Server

    2012-01-01

    This book describes the results and outcome of the FP6 project, known as hArtes, which focuses on the development of an integrated tool chain targeting a heterogeneous multi core platform comprising of a general purpose processor (ARM or powerPC), a DSP (the diopsis) and an FPGA. The tool chain takes existing source code and proposes transformations and mappings such that legacy code can easily be ported to a modern, multi-core platform. Benefits of the hArtes approach, described in this book, include: Uses a familiar programming paradigm: hArtes proposes a familiar programming paradigm which is compatible with the widely used programming practice, irrespective of the target platform. Enables users to view multiple cores as a single processor: the hArtes approach abstracts away the heterogeneity as well as the multi-core aspect of the underlying hardware so the developer can view the platform as consisting of a single, general purpose processor. Facilitates easy porting of existing applications: hArtes provid...

  1. TMI-2 core examination plan

    International Nuclear Information System (INIS)

    Carlson, J.O.

    1984-07-01

    The role of the Three Mile Island Unit 2 (TMI-2) core examination in the resolution of major nuclear safety issues is delineated in this plan. Relevant data needs are discussed, and approaches for recovering data from the TMI-2 plant are identified. Specific recommendations and justifications are provided for in situ documentation and off-site artifact examination activities. The research and development program is being managed by EG and G Idaho, Inc

  2. Temporal Change of Seismic Earth's Inner Core Phases: Inner Core Differential Rotation Or Temporal Change of Inner Core Surface?

    Science.gov (United States)

    Yao, J.; Tian, D.; Sun, L.; Wen, L.

    2017-12-01

    Since Song and Richards [1996] first reported seismic evidence for temporal change of PKIKP wave (a compressional wave refracted in the inner core) and proposed inner core differential rotation as its explanation, it has generated enormous interests in the scientific community and the public, and has motivated many studies on the implications of the inner core differential rotation. However, since Wen [2006] reported seismic evidence for temporal change of PKiKP wave (a compressional wave reflected from the inner core boundary) that requires temporal change of inner core surface, both interpretations for the temporal change of inner core phases have existed, i.e., inner core rotation and temporal change of inner core surface. In this study, we discuss the issue of the interpretation of the observed temporal changes of those inner core phases and conclude that inner core differential rotation is not only not required but also in contradiction with three lines of seismic evidence from global repeating earthquakes. Firstly, inner core differential rotation provides an implausible explanation for a disappearing inner core scatterer between a doublet in South Sandwich Islands (SSI), which is located to be beneath northern Brazil based on PKIKP and PKiKP coda waves of the earlier event of the doublet. Secondly, temporal change of PKIKP and its coda waves among a cluster in SSI is inconsistent with the interpretation of inner core differential rotation, with one set of the data requiring inner core rotation and the other requiring non-rotation. Thirdly, it's not reasonable to invoke inner core differential rotation to explain travel time change of PKiKP waves in a very small time scale (several months), which is observed for repeating earthquakes in Middle America subduction zone. On the other hand, temporal change of inner core surface could provide a consistent explanation for all the observed temporal changes of PKIKP and PKiKP and their coda waves. We conclude that

  3. Fe-based nanocrystalline powder cores with ultra-low core loss

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Xiangyue, E-mail: wangxiangyue1986@163.com [China Iron and Steel Research Institute Group, Beijing 100081 (China); Center of Advanced Technology and Materials Co., Ltd., Beijing 100081 (China); Lu, Zhichao; Lu, Caowei; Li, Deren [China Iron and Steel Research Institute Group, Beijing 100081 (China); Center of Advanced Technology and Materials Co., Ltd., Beijing 100081 (China)

    2013-12-15

    Melt-spun amorphous Fe{sub 73.5}Cu{sub 1}Nb{sub 3}Si{sub 15.5}B{sub 7} alloy strip was crushed to make flake-shaped fine powders. The passivated powders by phosphoric acid were mixed with organic and inorganic binder, followed by cold compaction to form toroid-shaped bonded powder-metallurgical magnets. The powder cores were heat-treated to crystallize the amorphous structure and to control the nano-grain structure. Well-coated phosphate-oxide insulation layer on the powder surface decreased the the core loss with the insulation of each powder. FeCuNbSiB nanocrystalline alloy powder core prepared from the powder having phosphate-oxide layer exhibits a stable permeability up to high frequency range over 2 MHz. Especially, the core loss could be reduced remarkably. At the other hand, the softened inorganic binder in the annealing process could effectively improve the intensity of powder cores. - Highlights: • Fe-based nanocrystalline powder cores were prepared with low core loss. • Well-coated phosphate-oxide insulation layer on the powder surface decreased the core loss. • Fe-based nanocrystalline powder cores exhibited a stable permeability up to high frequency range over 2 MHz. • The softened inorganic binder in the annealing process could effectively improve the intensity of powder cores.

  4. Hydraulic Profiling of a Parallel Channel Type Reactor Core

    International Nuclear Information System (INIS)

    Seo, Kyong-Won; Hwang, Dae-Hyun; Lee, Chung-Chan

    2006-01-01

    An advanced reactor core which consisted of closed multiple parallel channels was optimized to maximize the thermal margin of the core. The closed multiple parallel channel configurations have different characteristics to the open channels of conventional PWRs. The channels, usually assemblies, are isolated hydraulically from each other and there is no cross flow between channels. The distribution of inlet flow rate between channels is a very important design parameter in the core because distribution of inlet flow is directly proportional to a margin for a certain hydraulic parameter. The thermal hydraulic parameter may be the boiling margin, maximum fuel temperature, and critical heat flux. The inlet flow distribution of the core was optimized for the boiling margins by grouping the inlet orifices by several hydraulic regions. The procedure is called a hydraulic profiling

  5. Neutronic feasibility of an LMFBR super long-life core (SLLC)

    International Nuclear Information System (INIS)

    Kawashima, Masatoshi; Aoki, Katsutada; Arie, Kazuo; Tsuboi, Yasushi

    1988-01-01

    The LMFBR Super Long-Life Core (SLLC) concept has evolved over the last few years as one of the targets of innovative approaches for future FBR cost reduction. An idea for SLLC has been developed wherein the core lifetime is extended up to the plant life of about 30 years by applying the radially and axially multi-zoned core concept (the improved homogeneous core concept). The main purpose of the present study is placed on the evaluation of neutronic feasibility of the 1000 MWe class SLLC concept. The core size of the present SLLC, which is approximately 3 to 4 times as large as those of the current 1000 MWe core design, was determined by the limit of the maximum fast neutron fluence level, which was tentatively assumed to be 5-6x10 23 nvt as the target of the future development of advanced cladding materials. Emphasis is placed on the discussion of neutronic performances of cores with oxide fuels rather than metal or carbide fuels. The present study has shown that proper zoning of the different plutonium enrichment fuels at the initial core makes it possible to achieve small enough reactivity loss during 30-year burnup while satisfying mild variation of the subassembly power distributions using a higher fuel volume fraction of about 50%. Effects of important neutronic parameters on the core performances are also discussed. (orig.)

  6. A rough set approach for determining weights of decision makers in group decision making.

    Science.gov (United States)

    Yang, Qiang; Du, Ping-An; Wang, Yong; Liang, Bin

    2017-01-01

    This study aims to present a novel approach for determining the weights of decision makers (DMs) based on rough group decision in multiple attribute group decision-making (MAGDM) problems. First, we construct a rough group decision matrix from all DMs' decision matrixes on the basis of rough set theory. After that, we derive a positive ideal solution (PIS) founded on the average matrix of rough group decision, and negative ideal solutions (NISs) founded on the lower and upper limit matrixes of rough group decision. Then, we obtain the weight of each group member and priority order of alternatives by using relative closeness method, which depends on the distances from each individual group member' decision to the PIS and NISs. Through comparisons with existing methods and an on-line business manager selection example, the proposed method show that it can provide more insights into the subjectivity and vagueness of DMs' evaluations and selections.

  7. Machine learning for adaptive many-core machines a practical approach

    CERN Document Server

    Lopes, Noel

    2015-01-01

    The overwhelming data produced everyday and the increasing performance and cost requirements of applications?are transversal to a wide range of activities in society, from science to industry. In particular, the magnitude and complexity of the tasks that Machine Learning (ML) algorithms have to solve are driving the need to devise adaptive many-core machines that scale well with the volume of data, or in other words, can handle Big Data.This book gives a concise view on how to extend the applicability of well-known ML algorithms in Graphics Processing Unit (GPU) with data scalability in mind.

  8. Symplectic no-core shell-model approach to intermediate-mass nuclei

    Science.gov (United States)

    Tobin, G. K.; Ferriss, M. C.; Launey, K. D.; Dytrych, T.; Draayer, J. P.; Dreyfuss, A. C.; Bahri, C.

    2014-03-01

    We present a microscopic description of nuclei in the intermediate-mass region, including the proximity to the proton drip line, based on a no-core shell model with a schematic many-nucleon long-range interaction with no parameter adjustments. The outcome confirms the essential role played by the symplectic symmetry to inform the interaction and the winnowing of shell-model spaces. We show that it is imperative that model spaces be expanded well beyond the current limits up through 15 major shells to accommodate particle excitations, which appear critical to highly deformed spatial structures and the convergence of associated observables.

  9. Detecting groups of coevolving positions in a molecule: a clustering approach

    Directory of Open Access Journals (Sweden)

    Galtier Nicolas

    2007-11-01

    Full Text Available Abstract Background Although the patterns of co-substitutions in RNA is now well characterized, detection of coevolving positions in proteins remains a difficult task. It has been recognized that the signal is typically weak, due to the fact that (i amino-acid are characterized by various biochemical properties, so that distinct amino acids changes are not functionally equivalent, and (ii a given mutation can be compensated by more than one mutation, at more than one position. Results We present a new method based on phylogenetic substitution mapping. The two above-mentioned problems are addressed by (i the introduction of a weighted mapping, which accounts for the biochemical effects (volume, polarity, charge of amino-acid changes, (ii the use of a clustering approach to detect groups of coevolving sites of virtually any size, and (iii the distinction between biochemical compensation and other coevolutionary mechanisms. We apply this methodology to a previously studied data set of bacterial ribosomal RNA, and to three protein data sets (myoglobin of vertebrates, S-locus Receptor Kinase and Methionine Amino-Peptidase. Conclusion We succeed in detecting groups of sites which significantly depart the null hypothesis of independence. Group sizes range from pairs to groups of size ≃ 10, depending on the substitution weights used. The structural and functional relevance of these groups of sites are assessed, and the various evolutionary processes potentially generating correlated substitution patterns are discussed.

  10. A Practical Core Loss Model for Filter Inductors of Power Electronic Converters

    DEFF Research Database (Denmark)

    Matsumori, Hiroaki; Shimizu, Toshihisa; Wang, Xiongfei

    2018-01-01

    This paper proposes a core loss model for filter inductors of power electronic converters. The model allows a computationally efficient analysis on the core loss of the inductor under the square voltage excitation and the premagnetization condition. First, the core loss of the filter inductor under...... buck chopper excitation is evaluated with the proposed model and compared with the conventional methods. The comparison shows that the proposed method results in a better core loss prediction under the premagnetized condition than that of conventional alternatives. Then, the core loss of the filter...... inductor with the pulsewidth modulated inverter excitation is evaluated, which shows that the proposed model not only accurately predicts the core loss but also identifies the hysteresis loss part. These results demonstrate that the approach can further be used for the development of magnetic materials...

  11. Gas Sloshing and Radio Galaxy Dynamics in the Core of the 3C 449 Group

    Science.gov (United States)

    Lal, Dharam V.; Kraft, Ralph P.; Randall, Scott W.; Forman, William R.; Nulsen, Paul E.; Roediger, Elke; ZuHone, John A.; Hardcastle, Martin J.; Jones, Christine; Croston, Judith H.

    2013-01-01

    We present results from a 140 ks Chandra/ACIS-S observation of the hot gas around the canonical FR I radio galaxy 3C 449. An earlier, shorter 30 ks Chandra observation of the group gas showed an unusual entropy distribution and a surface brightness edge in the gas that could be a strong shock around the inner radio lobes. In our deeper data we find no evidence for a temperature increase inside of the brightness edge, but a temperature decrease across part of the edge. This suggests that the edge is a "sloshing" cold front due to a merger within the last 1.3-1.6 Gyr. Both the northern and southern inner jets are bent slightly to the west in projection as they enter their respective lobes, suggesting that the sloshing core is moving to the east. The straight inner jet flares at approximately the position where it crosses the contact edge, suggesting that the jet is entraining and thermalizing some of the hot gas as it crosses the edge.We also detect filaments of X-ray emission around the southern inner radio jet and lobe which we attribute to low entropy entrained gas. The lobe flaring and gas entrainment were originally predicted in simulations of Loken et al. and are confirmed in our deep observation.

  12. In-core Instrument Subcritical Verification (INCISV) - Core Design Verification Method - 358

    International Nuclear Information System (INIS)

    Prible, M.C.; Heibel, M.D.; Conner, S.L.; Sebastiani, P.J.; Kistler, D.P.

    2010-01-01

    According to the standard on reload startup physics testing, ANSI/ANS 19.6.1, a plant must verify that the constructed core behaves sufficiently close to the designed core to confirm that the various safety analyses bound the actual behavior of the plant. A large portion of this verification must occur before the reactor operates at power. The INCISV Core Design Verification Method uses the unique characteristics of a Westinghouse Electric Company fixed in-core self powered detector design to perform core design verification after a core reload before power operation. A Vanadium self powered detector that spans the length of the active fuel region is capable of confirming the required core characteristics prior to power ascension; reactivity balance, shutdown margin, temperature coefficient and power distribution. Using a detector element that spans the length of the active fuel region inside the core provides a signal of total integrated flux. Measuring the integrated flux distributions and changes at various rodded conditions and plant temperatures, and comparing them to predicted flux levels, validates all core necessary core design characteristics. INCISV eliminates the dependence on various corrections and assumptions between the ex-core detectors and the core for traditional physics testing programs. This program also eliminates the need for special rod maneuvers which are infrequently performed by plant operators during typical core design verification testing and allows for safer startup activities. (authors)

  13. The effect of short-term isometric training on core/torso stiffness.

    Science.gov (United States)

    Lee, Benjamin; McGill, Stuart

    2017-09-01

    "Core" exercise is a basic part of many physical training regimens with goals ranging from rehabilitation of spine and knee injuries to improving athletic performance. Core stiffness has been proposed to perform several functions including reducing pain by minimising joint micro-movements, and enhancing strength and speed performance. This study probes the links between a training approach and immediate but temporary changes in stiffness. Passive and active stiffness was measured on 24 participants; 12 having little to no experience in core training (inexperienced), and the other 12 being athletes experienced to core training methods; before and after a 15 min bout of isometric core exercises. Passive stiffness was assessed on a "frictionless" bending apparatus and active stiffness assessed via a quick release mechanism. Short-term isometric core training increased passive and active stiffness in most directions for both inexperienced and experienced participants, passive left lateral bend among experienced participants being the exception (P core stiffness, in this case following a single session. This may influence performance and injury resilience for a brief period.

  14. Effective field renormalization group approach for Ising lattice spin systems

    Science.gov (United States)

    Fittipaldi, Ivon P.

    1994-03-01

    A new applicable real-space renormalization group framework (EFRG) for computing the critical properties of Ising lattice spin systems is presented. The method, which follows up the same strategy of the mean-field renormalization group scheme (MFRG), is based on rigorous Ising spin identities and utilizes a convenient differential operator expansion technique. Within this scheme, in contrast with the usual mean-field type of equation of state, all the relevant self-spin correlations are taken exactly into account. The results for the critical coupling and the critical exponent v, for the correlation length, are very satisfactory and it is shown that this technique leads to rather accurate results which represent a remarkable improvement on those obtained from the standard MFRG method. In particular, it is shown that the present EFRG approach correctly distinguishes the geometry of the lattice structure even when employing its simplest size-cluster version. Owing to its simplicity we also comment on the wide applicability of the present method to problems in crystalline and disordered Ising spin systems.

  15. Release of 3-methyladenine from linker and core DNA of chromatin by a purified DNA glycosylase

    International Nuclear Information System (INIS)

    Heller, E.P.; Goldthwait, D.A.

    1983-01-01

    Oligonucleosomes were isolated from [ 14 C]thymidine-labeled HeLa cells by digestion of the nuclei with micrococcal nuclease and were then alkylated with [ 3 H]methylnitrosourea. Nucleosome core particles were also prepared by further digestion of the oligonucleosomes. The distribution of 3 H-labeled methyl groups in the linker versus the core DNA was established by a determination of 3 H: 14 C ratios in oligonucleosome and core DNA. The ratios in the core DNA of 145 and 165 base pair DNA fragments were 5.2 and 5.4, respectively, while the ratio in the oligonucleosomal DNA was 8.2. Assuming an equal mixture (as determined) of 145 and 165 base pair fragments of DNA in the 185 base pair repeat, the relative concentration of 3 H methyl groups in the linker versus the core DNA was 4.2. Thus, 45% of the 3 H methyl groups were in the linker DNA, and 55% were in the core DNA. Some shielding of the DNA was evident during alkylation. The concentrations of alkyl groups on the linker and core DNA were 67 and 12% of that found on free DNA alkylated under comparable conditions. No evidence for preferential shielding of the major or minor groove was observed. The purified 3-methyladenine DNA glycosylase I of Escherichia coli released approximately 37% of the 3-methyladenine from the linker DNA and 13% from the core DNA. The limited enzymatic removal of 3-methyladenine in vitro compared to the efficient removal in vivo suggests that conformational changes of the oligonucleosome and core structure must occur for total repair

  16. Waves in the core and mechanical core-mantle interactions

    DEFF Research Database (Denmark)

    Jault, D.; Finlay, Chris

    2015-01-01

    This Chapter focuses on time-dependent uid motions in the core interior, which can beconstrained by observations of the Earth's magnetic eld, on timescales which are shortcompared to the magnetic diusion time. This dynamics is strongly inuenced by the Earth's rapid rotation, which rigidies...... the motions in the direction parallel to the Earth'srotation axis. This property accounts for the signicance of the core-mantle topography.In addition, the stiening of the uid in the direction parallel to the rotation axis gives riseto a magnetic diusion layer attached to the core-mantle boundary, which would...... otherwisebe dispersed by Alfven waves. This Chapter complements the descriptions of large-scaleow in the core (8.04), of turbulence in the core (8.06) and of core-mantle interactions(8.12), which can all be found in this volume. We rely on basic magnetohydrodynamictheory, including the derivation...

  17. A core design study for 'zero-sodium-void-worth' cores

    International Nuclear Information System (INIS)

    Kawashima, Masatoshi; Suzuki, Masao; Hill, R.N.

    1992-01-01

    Recently, a number of low sodium-void-worth metal-fueled core design concepts have been proposed; to provide for flexibility in transuranic nuclide management strategy, core designs which exhibit a wide range of breeding characteristics have been developed. Two core concepts, a flat annular (transuranic burning) core and an absorber-type parfait (transuranic self-sufficient) core, are selected for this study. In this paper, the excess reactivity management schemes applied in the two designs are investigated in detail. In addition, the transient effect of reactivity insertions on the parfait core design is assessed. The upper and lower core regions in the parfait design are neutronically decoupled; however, the common coolant channel creates thermalhydraulic coupling. This combination of neutronic and thermalhydraulic characteristics leads to unique behavior in anticipated transient overpower events. (author)

  18. AER Working Group B activities in 2001

    International Nuclear Information System (INIS)

    Darilek, P.

    2001-01-01

    Review of AER Working Group B Meeting in Czech Republic - Plzen is given. Regular meeting of Core Design Group was organized by SKODA JS, Inc. and held at Plzen-Bolevec, Czech Republic, May 21+22, 2001, together with Working Group A (Authors)

  19. Mesoscale cavities in hollow-core waveguides for quantum optics with atomic ensembles

    Directory of Open Access Journals (Sweden)

    Haapamaki C.M.

    2016-08-01

    Full Text Available Single-mode hollow-core waveguides loaded with atomic ensembles offer an excellent platform for light–matter interactions and nonlinear optics at low photon levels. We review and discuss possible approaches for incorporating mirrors, cavities, and Bragg gratings into these waveguides without obstructing their hollow cores. With these additional features controlling the light propagation in the hollow-core waveguides, one could potentially achieve optical nonlinearities controllable by single photons in systems with small footprints that can be integrated on a chip. We propose possible applications such as single-photon transistors and superradiant lasers that could be implemented in these enhanced hollow-core waveguides.

  20. Case for integral core-disruptive accident analysis

    International Nuclear Information System (INIS)

    Luck, L.B.; Bell, C.R.

    1985-01-01

    Integral analysis is an approach used at the Los Alamos National Laboratory to cope with the broad multiplicity of accident paths and complex phenomena that characterize the transition phase of core-disruptive accident progression in a liquid-metal-cooled fast breeder reactor. The approach is based on the combination of a reference calculation, which is intended to represent a band of similar accident paths, and associated system- and separate-effect studies, which are designed to determine the effect of uncertainties. Results are interpreted in the context of a probabilistic framework. The approach was applied successfully in two studies; illustrations from the Clinch River Breeder Reactor licensing assessment are included

  1. k-core covers and the core

    NARCIS (Netherlands)

    Sanchez-Rodriguez, E.; Borm, Peter; Estevez-Fernandez, A.; Fiestras-Janeiro, G.; Mosquera, M.A.

    This paper extends the notion of individual minimal rights for a transferable utility game (TU-game) to coalitional minimal rights using minimal balanced families of a specific type, thus defining a corresponding minimal rights game. It is shown that the core of a TU-game coincides with the core of

  2. IRIS core criticality calculations

    International Nuclear Information System (INIS)

    Jecmenica, R.; Trontl, K.; Pevec, D.; Grgic, D.

    2003-01-01

    Three-dimensional Monte Carlo computer code KENO-VI of CSAS26 sequence of SCALE-4.4 code system was applied for pin-by-pin calculations of the effective multiplication factor for the first cycle IRIS reactor core. The effective multiplication factors obtained by the above mentioned Monte Carlo calculations using 27-group ENDF/B-IV library and 238-group ENDF/B-V library have been compared with the effective multiplication factors achieved by HELIOS/NESTLE, CASMO/SIMULATE, and modified CORD-2 nodal calculations. The results of Monte Carlo calculations are found to be in good agreement with the results obtained by the nodal codes. The discrepancies in effective multiplication factor are typically within 1%. (author)

  3. Three Types of Earth's Inner Core Boundary

    Science.gov (United States)

    Tian, D.; Wen, L.

    2017-12-01

    The Earth's inner core boundary (ICB) is the site where the liquid outer core solidifies and the solid inner core grows. Thus, the fine-scale structure of the ICB is important for our understanding of the thermo-compositional state of the Earth's core. In this study, we collect a large set of seismic records with high-quality pre-critical PKiKP and PcP phase pairs, recorded by two dense seismic arrays, Hi-net in Japan and USArray in US. This dataset samples the ICB regions beneath East Asia, Mexico and the Bering Sea. We use differential travel times, amplitude ratios and waveform differences between PKiKP and PcP phases to constrain fine-scale structure of the ICB. The sampled ICB can be grouped into three types based on their seismic characteristics: (1) a simple ICB with a flat and sharp boundary, (2) a bumpy ICB with topographic height changes of 10 km, and (3) a localized mushy ICB with laterally varying thicknesses of 4-8 km. The laterally varying fine-scale structure of the ICB indicates existence of complex small-scale forces at the surface and a laterally varying solidification process of the inner core due to lateral variation of thermo-compositional condition near the ICB.

  4. Methods for the Compilation of a Core List of Journals in Toxicology.

    Science.gov (United States)

    Kuch, T. D. C.

    Previously reported methods for the compilation of core lists of journals in multidisciplinary areas are first examined, with toxicology used as an example of such an area. Three approaches to the compilation of a core list of journals in toxicology were undertaken and the results analyzed with the aid of models. Analysis of the results of the…

  5. Understanding the effects of the core on the nutation of the Earth

    Directory of Open Access Journals (Sweden)

    Véronique Dehant

    2017-11-01

    Full Text Available In this review paper, we examine the changes in the Earth orientation in space and focus on the nutation (shorter-term periodic variations, which is superimposed on precession (long-term trend on a timescale of years. We review the nutation modelling involving several coupling mechanisms at the core-mantle boundary using the Liouville angular momentum equations for a two-layered Earth with a liquid flattened core. The classical approach considers a Poincaré fluid for the core with an inertial pressure coupling mechanism at the core-mantle boundary. We examine possible additional coupling mechanisms to explain the observations. In particular, we examine how we can determine the flattening of the core as well as information on the magnetic field and the core flow from the nutation observations. The precision of the observations is shown to be high enough to increase our understanding on the coupling mechanisms at the core-mantle boundary.

  6. Review of Developing Quantitative Literacy Skills in History and the Social Sciences: A Web-Based Common Core Approach by Kathleen W. Craver

    Directory of Open Access Journals (Sweden)

    Victor J. Ricchezza

    2015-07-01

    Full Text Available Kathleen W. Craver. Developing Quantitative Literacy Skills in History and Social Sciences: A Web-Based Common Core Standards Approach (Lantham MD: Rowman & Littlefield Publishing Group, Inc., 2014. 191 pp. ISBN 978-1-4758-1050-9 (cloth; ISBN …-1051-6 (pbk; ISBN…-1052-3 (electronic. This book could be a breakthrough for teachers in the trenches who are interested in or need to know about quantitative literacy (QL. It is a resource providing 85 topical pieces, averaging 1.5 pages, in which a featured Web site is presented, described, and accompanied by 2-4 critical-thinking questions purposefully drawing on data from the Web site. The featured Web sites range from primary documents (e.g., All about California and the Inducements to Settle There, 1870 to modern databases (e.g., city-data.com. The 85 pieces are organized under three headings (Social Science Sites; U.S. History Sites; World History Sites following three chapters introducing QL, quantitative sources, and communicating with data. The QL skills in the questions are the usual suspects such as making comparisons, graph reading, table reading, and calculating and thinking about ratios. The author, the Head Librarian at the National Cathedral School (Washington DC, clearly aims the book at high school teachers who wish to comply with the Common Core Standards, which call for making communication with data a part of English Language Arts. The authors of this review believe the book will be of great value for college-level teachers too, whether they be interested in finding context (e.g., history and social science topics for their QL-math courses, or adding QL-type questions to their in-discipline courses. Moreover, we fervently wish that this book will inspire others to create and compile similar resources in such a way that, in the future, there will be a vast open-access library of such collections of QL questions coupled to data sources – with updated links – available on the

  7. The effects of isolated and integrated 'core stability' training on athletic performance measures: a systematic review.

    Science.gov (United States)

    Reed, Casey A; Ford, Kevin R; Myer, Gregory D; Hewett, Timothy E

    2012-08-01

    Core stability training, operationally defined as training focused to improve trunk and hip control, is an integral part of athletic development, yet little is known about its direct relation to athletic performance. This systematic review focuses on identification of the association between core stability and sports-related performance measures. A secondary objective was to identify difficulties encountered when trying to train core stability with the goal of improving athletic performance. A systematic search was employed to capture all articles related to athletic performance and core stability training that were identified using the electronic databases MEDLINE, CINAHL and SPORTDiscus™ (1982-June 2011). A systematic approach was used to evaluate 179 articles identified for initial review. Studies that performed an intervention targeted toward the core and measured an outcome related to athletic or sport performances were included, while studies with a participant population aged 65 years or older were excluded. Twenty-four in total met the inclusionary criteria for review. Studies were evaluated using the Physical Therapy Evidence Database (PEDro) scale. The 24 articles were separated into three groups, general performance (n = 8), lower extremity (n = 10) and upper extremity (n = 6), for ease of discussion. In the majority of studies, core stability training was utilized in conjunction with more comprehensive exercise programmes. As such, many studies saw improvements in skills of general strengths such as maximum squat load and vertical leap. Surprisingly, not all studies reported measurable increases in specific core strength and stability measures following training. Additionally, investigations that targeted the core as the primary goal for improved outcome of training had mixed results. Core stability is rarely the sole component of an athletic development programme, making it difficult to directly isolate its affect on athletic performance

  8. Whole-core LEU fuel demonstration in the ORR

    International Nuclear Information System (INIS)

    Snelgrove, J.L.; Bretscher, M.M.; Cornella, R.J.; Hobbs, R.W.

    1985-01-01

    A whole-core demonstration of LEU fuel in the ORR is expected to begin during November 1985. Fuel elements will contain U 3 Si 2 at 4.8 Mg U/m 3 and shim rod fuel followers will contain U 3 Si 2 at 3.5 Mg U/m 3 . Fuel fabrication is underway at B and W, CERCA, and NUKEM, with shipments scheduled to commence in October. The primary objectives of the demonstration are to provide data for validation of LEU and mixed-core fuel cycle calculations and to provide a large-scale demonstration of the acceptable performance of production-line U 3 Si 2 fuel elements. It is planned to approach the full LEU core through a series of mixed cores. Measurements to be made include flux distribution, reactivity swing, control rod worths, cycle length, fuel discharge burnup, gamma heating rates, β/sub eff/l, and isothermal temperature coefficient. Measurements will also be made on fresh LEU and fresh HEU critical configurations. Preliminary safety approval has been received and the final safety assessment is being reviewed

  9. Family Skills for General Psychiatry Residents: Meeting ACGME Core Competency Requirements

    Science.gov (United States)

    Berman, Ellen M.; Heru, Alison M.; Grunebaum, Henry; Rolland, John; Wood, Beatrice; Bruty, Heidi

    2006-01-01

    Objective: The authors discuss the knowledge, attitudes, and skills needed for a resident to be competent in supporting and working with families, as mandated by the residency review committee (RRC) core competencies. Methods: The RRC core competencies, as they relate to patients and their families, are reviewed. The Group for Advancement of…

  10. Core construction for nuclear reactors

    International Nuclear Information System (INIS)

    Pettinger, D.S.

    1977-01-01

    HTR core construction with prismatic graphite blocks piled into columns. The front of the blocks is concavely curved. The lines of contact of two blocks are always not vertical, i.e. the blocks of one column are supported by the blocks of neighbouring columns so that ducts are formed. Groups of three or four of these columns may additionally be arranged around a central column which has recesses in order to lock the blocks of one group together. With this arrangement, dimensional changes of the graphite blocks under operating conditions can be taken up. (DG) [de

  11. The whole-core LEU fuel demonstration in the ORR

    International Nuclear Information System (INIS)

    Snelgrove, J.L.; Bretscher, M.M.; Cornella, R.J.; Hobbs, R.W.

    1985-01-01

    A whole-core demonstration of LEU fuel in the ORR is expected to begin during November 1985. Fuel elements will contain U 3 Si 2 at 4.8 Mg U/m 3 and shim rod fuel followers will contain U 3 Si 2 at 3.5 Mg U/m 3 . Fuel fabrication is underway at B and W, CERCA, and NUKEM, with shipments scheduled to commence in October. The primary objectives of the demonstration are to provide data for validation of LEU and mixed-core fuel cycle calculations and to provide a large-scale demonstration of the acceptable performance of production-line U 3 Si 2 fuel elements. It is planned to approach the full LEU core through a series of mixed cores. Measurements to be made include flux distribution, reactivity swing, control rod worth, cycle length, fuel discharge burn-up, gamma heating rate, β eff /l, and isothermal temperature coefficient. Measurements will also be made on fresh LEU and fresh HEU critical configurations. Preliminary safety approval has been received and the final safety assessment is being reviewed. Key issues being addressed in the safety assessment are fuel performance, radiological consequences, margin to burnout and transient behavior. The LEU core is comparable in all safety aspects to the HEU core and the transition core is only marginally worse owing to higher power seeking factors. (author)

  12. Core vocabulary of young children with Down syndrome.

    Science.gov (United States)

    Deckers, Stijn R J M; Van Zaalen, Yvonne; Van Balkom, Hans; Verhoeven, Ludo

    2017-06-01

    The aim of this study was to develop a core vocabulary list for young children with intellectual disabilities between 2 and 7 years of age because data from this population are lacking in core vocabulary literature. Children with Down syndrome are considered one of the most valid reference groups for researching developmental patterns in children with intellectual disabilities; therefore, spontaneous language samples of 30 Dutch children with Down syndrome were collected during three different activities with multiple communication partners (free play with parents, lunch- or snack-time at home or at school, and speech therapy sessions). Of these children, 19 used multimodal communication, primarily manual signs and speech. Functional word use in both modalities was transcribed. The 50 most frequently used core words accounted for 67.2% of total word use; 16 words comprised core vocabulary, based on commonality. These data are consistent with similar studies related to the core vocabularies of preschoolers and toddlers with typical development, although the number of nouns present on the core vocabulary list was higher for the children in the present study. This finding can be explained by manual sign use of the children with Down syndrome and is reflective of their expressive vocabulary ages.

  13. Effect of Core Stability Training on Trunk Function, Standing Balance, and Mobility in Stroke Patients.

    Science.gov (United States)

    Haruyama, Koshiro; Kawakami, Michiyuki; Otsuka, Tomoyoshi

    2017-03-01

    Trunk function is important for standing balance, mobility, and functional outcome after stroke, but few studies have evaluated the effects of exercises aimed at improving core stability in stroke patients. To investigate the effectiveness of core stability training on trunk function, standing balance, and mobility in stroke patients. An assessor-blinded, randomized controlled trial was undertaken in a stroke rehabilitation ward, with 32 participants randomly assigned to an experimental group or a control group (n = 16 each). The experimental group received 400 minutes of core stability training in place of conventional programs within total training time, while the control group received only conventional programs. Primary outcome measures were evaluated using the Trunk Impairment Scale (TIS), which reflects trunk function. Secondary outcome measures were evaluated by pelvic tilt active range of motion in the sagittal plane, the Balance Evaluation Systems Test-brief version (Brief-BESTest), Functional Reach test, Timed Up-and-Go test (TUG), and Functional Ambulation Categories (FAC). A general linear repeated-measures model was used to analyze the results. A treatment effect was found for the experimental group on the dynamic balance subscale and total score of the TIS ( P = .002 and P Core stability training has beneficial effects on trunk function, standing balance, and mobility in stroke patients. Our findings might provide support for introducing core stability training in stroke rehabilitation.

  14. Investigation of space-energy effects in the reactivity measurement by neutron noise with ex-core detectors in a reflected LWR

    International Nuclear Information System (INIS)

    Lescano, V.H.; Behringer, K.

    1981-11-01

    Practical application of the zero-crossing correlation method for measuring slightly subcritical reactivities in a swimming pool reactor required the use of detector locations in the reflector zone near to the core boundary. Experimental investigations of neutron-noise cross-power spectra showed significant deviations from the point reactor model at higher frequencies (> 100 Hz). Nevertheless, the use of the point reactor model was found to be an useful approach in the analysis of the zero-crossing correlation method yielding results which agreed well with those obtained from the rod-drop method. The theoretical part of the work is concerned with a space-dependent model calculation in two-group diffusion theory to support the experimental findings. The model calculation can explain the trends observed in the neutron-noise spectra as well as the applicability of the point reactor model to the zero-crossing correlation method. To obtain better insight, the calculations have been extended to neutron-noise spectra when one or both detectors are located in the core zone. In the case of a large core and widely spaced detectors, with at least one detector in the core zone, a sink frequency appears in the spectra. This effect is well-known in coupled-core kinetics. (Auth.)

  15. A procedure for searching the equilibrium core of a research reactor

    International Nuclear Information System (INIS)

    Bakri Arbie; Liem Peng Hong; Prayoto

    1996-01-01

    A procedure for searching the equilibrium core of a research reactor has been proposed. The searching procedure is based on the relaxation method and has been implemented in Batan-EQUIL-2D in-core fuel management code. The few-group neutron diffusion theory in 2-D, X-Y, and R-Z reactor geometries are adopted as the framework of the code. The successful applicability of the procedure for obtaining the new RSG-GAS (MPR-30) silicide equilibrium core was shown. (author)

  16. Dynamical theory of dense groups of galaxies

    Science.gov (United States)

    Mamon, Gary A.

    1990-01-01

    It is well known that galaxies associate in groups and clusters. Perhaps 40% of all galaxies are found in groups of 4 to 20 galaxies (e.g., Tully 1987). Although most groups appear to be so loose that the galaxy interactions within them ought to be insignificant, the apparently densest groups, known as compact groups appear so dense when seen in projection onto the plane of the sky that their members often overlap. These groups thus appear as dense as the cores of rich clusters. The most popular catalog of compact groups, compiled by Hickson (1982), includes isolation among its selection critera. Therefore, in comparison with the cores of rich clusters, Hickson's compact groups (HCGs) appear to be the densest isolated regions in the Universe (in galaxies per unit volume), and thus provide in principle a clean laboratory for studying the competition of very strong gravitational interactions. The $64,000 question here is then: Are compact groups really bound systems as dense as they appear? If dense groups indeed exist, then one expects that each of the dynamical processes leading to the interaction of their member galaxies should be greatly enhanced. This leads us to the questions: How stable are dense groups? How do they form? And the related question, fascinating to any theorist: What dynamical processes predominate in dense groups of galaxies? If HCGs are not bound dense systems, but instead 1D change alignments (Mamon 1986, 1987; Walke & Mamon 1989) or 3D transient cores (Rose 1979) within larger looser systems of galaxies, then the relevant question is: How frequent are chance configurations within loose groups? Here, the author answers these last four questions after comparing in some detail the methods used and the results obtained in the different studies of dense groups.

  17. Compaction of a Bacterial Group I Ribozyme Coincides with the Assembly of Core Helices

    International Nuclear Information System (INIS)

    Perez-Salas, U.; Rangan, P.; Krueger, S.; Briber, R.; Thirumalai, D.; Woodson, S.

    2004-01-01

    Counterions are critical to the self-assembly of RNA tertiary structure because they neutralize the large electrostatic forces which oppose the folding process. Changes in the size and shape of the Azoarcus group I ribozyme as a function of Mg 2+ and Na + concentration were followed by small angle neutron scattering. In low salt buffer, the RNA was expanded, with an average radius of gyration (R g ) of 53 ± 1 Angstroms. A highly cooperative transition to a compact form (R g = 31.5 ± 0.5 Angstroms) was observed between 1.6 and 1.7 mM MgCl 2 . The collapse transition, which is unusually sharp in Mg 2+ , has the characteristics of a first-order phase transition. Partial digestion with ribonuclease T1 under identical conditions showed that this transition correlated with the assembly of double helices in the ribozyme core. Fivefold higher Mg 2+ concentrations were required for self-splicing, indicating that compaction occurs before native tertiary interactions are fully stabilized. No further decrease in Rg was observed between 1.7 and 20 mM MgCl 2 , indicating that the intermediates have the same dimensions as the native ribozyme, within the uncertainty of the data (± 1 Angstroms). A more gradual transition to a final R g of approximately 33.5 Angstroms was observed between 0.45 and 2 M NaCl. This confirms the expectation that monovalent ions not only are less efficient in charge neutralization but also contract the RNA less efficiently than multivalent ions

  18. Sharing solutions - The users' group approach

    International Nuclear Information System (INIS)

    Kania, G.; Winter, K.

    1991-01-01

    Regulatory compliance, operating efficiency, and plant-life extension are common goals shared by all nuclear power plants. To achieve these goals, nuclear utilities must be proactive and responsive to the regulatory agencies, work together with each other in the sharing of operating experiences and solution to problems, and develop long-term working relationships with an even smaller number of quality suppliers. Users' and owners' groups are one of the most effective means of accomplishing these objectives. Users' groups facilitate communication between nuclear power plants and provide an interactive vendor interface. Both the utilities and suppliers benefit through shared information and improved customer feedback. This paper describes the evolution and experiences of the Sorrento Electronics (SE) Radiation Monitoring System (RMS) Users' Group. The authors highlight the group's past successes and plans for the future

  19. BioCore Guide: A Tool for Interpreting the Core Concepts of Vision and Change for Biology Majors.

    Science.gov (United States)

    Brownell, Sara E; Freeman, Scott; Wenderoth, Mary Pat; Crowe, Alison J

    2014-01-01

    Vision and Change in Undergraduate Biology Education outlined five core concepts intended to guide undergraduate biology education: 1) evolution; 2) structure and function; 3) information flow, exchange, and storage; 4) pathways and transformations of energy and matter; and 5) systems. We have taken these general recommendations and created a Vision and Change BioCore Guide-a set of general principles and specific statements that expand upon the core concepts, creating a framework that biology departments can use to align with the goals of Vision and Change. We used a grassroots approach to generate the BioCore Guide, beginning with faculty ideas as the basis for an iterative process that incorporated feedback from more than 240 biologists and biology educators at a diverse range of academic institutions throughout the United States. The final validation step in this process demonstrated strong national consensus, with more than 90% of respondents agreeing with the importance and scientific accuracy of the statements. It is our hope that the BioCore Guide will serve as an agent of change for biology departments as we move toward transforming undergraduate biology education. © 2014 S. E. Brownell et al. CBE—Life Sciences Education © 2014 The American Society for Cell Biology. This article is distributed by The American Society for Cell Biology under license from the author(s). It is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

  20. EFFECTS OF CORE STABILIZATION PROGRAM AND CONVENTIONAL EXERCISES IN THE MANAGEMENT OF PATIENTS WITH CHRONIC MECHANICAL LOW BACK PAIN

    Directory of Open Access Journals (Sweden)

    Suresh Babu Reddy .A

    2015-04-01

    Full Text Available Background: Conventional back care exercises are advocated to treat the pain and to strengthen the involved muscles. There will be possibility of the pain getting recurred due to disproportionate balance and stability in the muscles. The core stabilization is major trend in rehabilitation, it aims at improving stability during functional activities, balance, flexibility, strength training and effectively manage the pain as well. Objective: To find the efficacy of the concept of core stabilization when compared to conventional back care exercises in patients with chronic mechanical low back pain. Methods: Forty patients with chronic Mechanical Low back pain were selected through purposive sampling and were randomly assigned into control group who received conventional back exercises and SWD (n=20, experimental group who received core stabilization and SWD (n=20. Both the groups received SWD, along with conventional back exercises for one group and core stabilization for the other group three days a week for 6 weeks. The treatment outcome was assessed using visual analogue scale, Rolland Morris Disability Questionnaire and Lumbar range of motion using goniometer. Results: After a 6 weeks training period the core stabilization group scored significantly higher than the conventional group for VAS (p=0.05 RMDQ (p=0.05 whereas ROM improved higher in conventional group (p=0.05. Conclusion: After the treatment sessions Core stabilization group registered a significant improvement when compared to conventional back care exercises in improving function and in relieving pain.