WorldWideScience

Sample records for copv mechanics applied

  1. Strain Measurement Using FBG on COPV in Stress Rupture Test

    Science.gov (United States)

    Banks, Curtis; Grant, Joseph

    2007-01-01

    to better predict the remaining life of the STS COPVs. The primary test objective is obtaining data to verify the hypothesis of a radially oriented thru-thickness stress-riser in the COPV composite whose magnitude is a function of the applied pressure and the load history. The anticipated load dependent response follows from the constitutive behavior of the composite overwrap so data to quantify its nonlinear and time dependent response will be sought. The objective of the Fiber Braggs Gratings (FBGs) were to advance the state-of-the-art by developing techniques using FBG sensors that are capable of assessing stress-rupture degradation in Kevlar COPVs in a health monitoring mode (1). Moreover, they sought to answer questions of how embedded sensors affect overall integrity of the structure. And lastly, they sought to provide an important link in the overall stress rupture study that will help close the loop on the COPV fabrication process. NDE inspection methods will be used from start to finish and FBG will be an integral link within the overall chain.

  2. Health Monitoring of Composite Overwrapped Pressure Vessels (COPVs) Using Meandering Winding Magnetometer ((MWM(Registered Trademark)) Eddy Current Sensors

    Science.gov (United States)

    Russell, Rick; Grundy, David; Jablonski, David; Martin, Christopher; Washabaugh, Andrew; Goldfine, Neil

    2011-01-01

    There are 3 mechanisms that affect the life of a COPV are: a) The age life of the overwrap; b) Cyclic fatigue of the metallic liner; c) Stress Rupture life. The first two mechanisms are understood through test and analysis. A COPV Stress Rupture is a sudden and catastrophic failure of the overwrap while holding at a stress level below the ultimate strength for an extended time. Currently there is no simple, deterministic method of determining the stress rupture life of a COPV, nor a screening technique to determine if a particular COPV is close to the time of a stress rupture failure. Conclusions: Demonstrated a correlation between MWM response and pressure or strain. Demonstrated the ability to monitor stress in COPV at different orientations and depths. FA41 provides best correlation with bottle pressure or stress.

  3. Advances in Applied Mechanics

    OpenAIRE

    2014-01-01

    Advances in Applied Mechanics draws together recent significant advances in various topics in applied mechanics. Published since 1948, Advances in Applied Mechanics aims to provide authoritative review articles on topics in the mechanical sciences, primarily of interest to scientists and engineers working in the various branches of mechanics, but also of interest to the many who use the results of investigations in mechanics in various application areas, such as aerospace, chemical, civil, en...

  4. Advances in applied mechanics

    CERN Document Server

    Wu, Theodore Y; Wu, Theodore Y

    2000-01-01

    This highly acclaimed series provides survey articles on the present state and future direction of research in important branches of applied solid and fluid mechanics. Mechanics is defined as a branch of physics that focuses on motion and on the reaction of physical systems to internal and external forces.

  5. Kevlar 49/Epoxy COPV Aging Evaluation

    Science.gov (United States)

    Sutter, James K.; Salem, Jonathan L.; Thesken, John C.; Russell, Richard W.; Littell, Justin; Ruggeri, Charles; Leifeste, Mark R.

    2008-01-01

    NASA initiated an effort to determine if the aging of Kevlar 49/Epoxy composite overwrapped pressure vessels (COPV) affected their performance. This study briefly reviews the history and certification of composite pressure vessels employed on NASA Orbiters. Tests to evaluate overwrap tensile strength changes compared 30 year old samples from Orbiter vessels to new Kevlar/Epoxy pressure vessel materials. Other tests include transverse compression and thermal analyses (glass transition and moduli). Results from these tests do not indicate a noticeable effect due to aging of the overwrap materials.

  6. Applied mechanics of solids

    CERN Document Server

    Bower, Allan F

    2009-01-01

    Modern computer simulations make stress analysis easy. As they continue to replace classical mathematical methods of analysis, these software programs require users to have a solid understanding of the fundamental principles on which they are based. Develop Intuitive Ability to Identify and Avoid Physically Meaningless Predictions Applied Mechanics of Solids is a powerful tool for understanding how to take advantage of these revolutionary computer advances in the field of solid mechanics. Beginning with a description of the physical and mathematical laws that govern deformation in solids, the text presents modern constitutive equations, as well as analytical and computational methods of stress analysis and fracture mechanics. It also addresses the nonlinear theory of deformable rods, membranes, plates, and shells, and solutions to important boundary and initial value problems in solid mechanics. The author uses the step-by-step manner of a blackboard lecture to explain problem solving methods, often providing...

  7. Elastic Plastic Fracture Analysis of an Aluminum COPV Liner

    Science.gov (United States)

    Forth, Scott; Gregg, Bradley; Bailey, Nathaniel

    2012-01-01

    Onboard any space-launch vehicle, composite over-wrapped pressure vessels (COPVs) may be utilized by propulsion or environmental control systems. The failure of a COPV has the potential to be catastrophic, resulting in the loss of vehicle, crew or mission. The latest COPV designs have reduced the wall-thickness of the metallic liner to the point where the material strains plastically during operation. At this time, the only method to determine the damage tolerance lifetime (safe-life) of a plastically responding metallic liner is through full-scale COPV testing. Conducting tests costs substantially more and can be far more time consuming than performing an analysis. As a result of this cost, there is a need to establish a qualifying process through the use of a crack growth analysis tool. This paper will discuss fracture analyses of plastically responding metallic liners in COPVs. Uni-axial strain tests have been completed on laboratory specimens to collect elastic-plastic crack growth data. This data has been modeled with the crack growth analysis tool, NASGRO 6.20 to predict the response of laboratory specimens and subsequently the complexity of a COPV.

  8. Composite Overwrapped Pressure Vessels (COPV) Stress Rupture Test

    Science.gov (United States)

    Russell, Richard; Flynn, Howard; Forth, Scott; Greene, Nathanael; Kezian, Michael; Varanauski, Don; Yoder, Tommy; Woodworth, Warren

    2009-01-01

    One of the major concerns for the aging Space Shuttle fleet is the stress rupture life of composite overwrapped pressure vessels (COPVs). Stress rupture life of a COPV has been defined as the minimum time during which the composite maintains structural integrity considering the combined effects of stress levels and time. To assist in the evaluation of the aging COPVs in the Orbiter fleet an analytical reliability model was developed. The actual data used to construct this model was from testing of COPVs constructed of similar, but not exactly same materials and pressure cycles as used on Orbiter vessels. Since no actual Orbiter COPV stress rupture data exists the Space Shuttle Program decided to run a stress rupture test to compare to model predictions. Due to availability of spares, the testing was unfortunately limited to one 40" vessel. The stress rupture test was performed at maximum operating pressure at an elevated temperature to accelerate aging. The test was performed in two phases. The first phase, 130 F, a moderately accelerated test designed to achieve the midpoint of the model predicted point reliability. The more aggressive second phase, performed at 160 F was designed to determine if the test article will exceed the 95% confidence interval of the model. This paper will discuss the results of this test, it's implications and possible follow-on testing.

  9. Defining the coupled effects of cryogenic, space-radiation, and hypervelocity impact damamge on COPV's Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The intent of the proposed effort is to investigate the detailed composite overwrapped pressure vessel (COPV) performance characteristics after being subject to...

  10. Online Monitoring of Composite Overwrapped Pressure Vessels (COPV)

    DEFF Research Database (Denmark)

    Pereira, Gilmar Ferreira; Figueiredo, Joana; Faria, Hugo

    2015-01-01

    Composite overwrapped pressure vessels (COPV) have been increasingly pointed to as the most effective solution for high pressure storage of liquid and gaseous fluids. Reasonably high stiffness-to-weight ratios make them suitable for both static and mobile applications. However, higher operating...... pressures are sought continuously, to get higher energy densities in such storage systems, and safety aspects become critical. Thus, reliable design and test procedures are required to reduce the risks of undesired and unpredicted failures. An in-service health monitoring system may contribute to a better...... product development, design and optimization, as well as to minimize the risks and improve the public acceptance. Within the scope of developing different COPV models for a wide range of operating pressures and applications, optical fiber Bragg grating (FBG) sensors were embedded in the liner...

  11. CHINESE JOURNAL OF APPLIED MECHANICS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Analytical analysis of supporting circular tunnel construction in viscoelastic rock mass Wang Huaning Zhong Zheng (School of Aerospace Engineering and Applied Mechanics, Tongji University, 200092, Shanghai, China) Abstract: Tunnel excavation and supporting are continuous processes. The time related deformation is due to rheologie behavior of rock mass and construction process. Time-varying function of radius is established to simulate the circular tunnel excavation process. The stresses and displacement general solutions of viscoelastic rock mass with elastic support during construction are derived by Laplace transformation method, which contains the undetermined supporting force. Volterra integral equation of supporting force is established by substituting different radius excavation function and surface force of excavation and supporting stage into the contact conditions. For Boltzmann viscoelastic model, supporting force can be calculated exactly. The expression and example show that radial displacement after supporting is increased with exponential form and stabilized to one value. If final tunnel is the same size and supported immediately in the finish time but excavated with different velocity, the displacement of cases with high velocity is larger in the beginning and smaller after some time. The final steady displacement is also smaller when excavated faster, but the displacement occurred after supporting is larger. The solutions can be calculated for cases with arbitrary time-varying radius and the method is applicable for the analysis of other viscoelastic models. Keywords: viscoelasticity, construction process, support, analytical analysis

  12. Nondestructive Evaluation and Monitoring Results from COPV Accelerated Stress Rupture Testing, NASA White Sands Test Facility (WSTF)

    Science.gov (United States)

    Saulsberry Regor

    2010-01-01

    Develop and demonstrate NDE techniques for real-time characterization of CPVs and, where possible, identification of NDE capable of assessing stress rupture related strength degradation and/or making vessel life predictions (structural health monitoring or periodic inspection modes). Secondary: Provide the COPV user and materials community with quality carbon/epoxy (C/Ep) COPV stress rupture progression rate data. Aid in modeling, manufacturing, and application of COPVs for NASA spacecraft.

  13. CHINESE JOURNAL OF APPLIED MECHANICS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    A decomposed theorem of axisymmetric thermoelastic circular cylinder with transversely isotropic Wu Di Zhao Baosheng (School of Mechanical Engineering, University of Science and Technology Liaoning, 114051, Anshan, China) Abstract: For analyzing the exact stress field, the exact displacement field and the exact temperature field in axisymmetric thermoelastic circular cylinder with transversely isotropic,a decomposed theorem of axisymmetric deformation of a circular cylinder is given by using Bessel's function and the solution of the axisymmetric thermoelastic circular cylinder with transversely isotropic directly from the general solution. Without employing ad hoc assumptions, the refined equation of an axisymmetric thermoelastic circular cylinder with transversely isotropic is obtained. The stress field satisfies the equilibrium equations without body force and the compatibility equations.

  14. Quantum mechanics for applied physics and engineering

    CERN Document Server

    Fromhold, Albert T

    2011-01-01

    This excellent text, directed to upper-level undergraduates and graduate students in engineering and applied physics, introduces the fundamentals of quantum mechanics, emphasizing those aspects of quantum mechanics and quantum statistics essential to an understanding of solid-state theory. A heavy background in mathematics and physics is not required beyond basic courses in calculus, differential equations, and calculus-based elementary physics.The first three chapters introduce quantum mechanics (using the Schrödinger equations), quantum statistics, and the free-electron theory of metals. Ch

  15. Use of Raman Spectroscopy and Delta Volume Growth from Void Collapse to Assess Overwrap Stress Gradients Compromising the Reliability of Large Kevlar/Epoxy COPVs

    Science.gov (United States)

    Kezirian, Michael T.; Phoenix, S. Leigh; Eldridge, Jeffrey I.

    2009-01-01

    Composite Overwrapped Pressure Vessels (COPVs) are frequently used for storing pressurized gases aboard spacecraft and aircraft when weight saving is desirable compared to all-metal versions. Failure mechanisms in fibrous COPVs and variability in lifetime can be very different from their metallic counterparts; in the former, catastrophic stress-rupture can occur with virtually no warning, whereas in latter, a leak before burst design philosophy can be implemented. Qualification and certification typically requires only one burst test on a production sample (possibly after several pressure cycles) and the vessel need only meet a design burst strength (the maximum operating pressure divided by a knockdown factor). Typically there is no requirement to assess variability in burst strength or lifetime, much less determine production and materials processing parameters important to control of such variability. Characterizing such variability and its source is crucial to models for calculating required reliability over a given lifetime (e.g. R = 0.9999 for 15 years). In this paper we present a case study of how lack of control of certain process parameters in COPV manufacturing can result in variations among vessels and between production runs that can greatly increase uncertainty and reduce reliability. The vessels considered are 40-inch ( NASA Glenn Research center, Cleveland, OH, 44135 29,500 in3 ) spherical COPVs with a 0.74 in. thick Kevlar49/epoxy overwrap and with a titanium liner of which 34 were originally produced. Two burst tests were eventually performed that unexpectedly differed by almost 5%, and were 10% lower than anticipated from burst tests on 26-inch sister vessels similar in every detail. A major observation from measurements made during proof testing (autofrettage) of the 40-inch vessels was that permanent volume growth from liner yielding varied by a factor of more than two (150 in3 to 360 in3 ), which suggests large differences in the residual

  16. 12th International Congress of Applied Mechanics

    CERN Document Server

    Vincenti, Walter

    1969-01-01

    This volume contains the Proceedings of the Twelfth International Congress of Applied Mechanics, held at Stanford University on August 26 to 31, 1968. The Congress was organized by the International Union of Theoretical and Applied Mechanics; members of the IUTAM Congress Committee and Bureau are listed under Congress Organization. The members of the Stanford Organizing Committee, which was responsible for the detailed organization of the Congress, are also given, as are the names of the sponsors and the industrial and educational organizations that contributed so generously to the financial support of the meeting. Those attending the Congress came from 32 countries and totaled 1337 persons, plus wives and children. A list of the registered participants is included in the volume. The technical sessions of the Congress comprised four General Lectures and 281 contributed papers, the latter being presented in groups of five simultaneous sessions. The final choice of the contributed papers was made on the basis o...

  17. Composite Overwrapped Pressure Vessels (COPV) Stress Rupture Test: Part 2. Part 2

    Science.gov (United States)

    Russell, Richard; Flynn, Howard; Forth, Scott; Greene, Nathanael; Kezirian, Michael; Varanauski, Don; Leifeste, Mark; Yoder, Tommy; Woodworth, Warren

    2010-01-01

    One of the major concerns for the aging Space Shuttle fleet is the stress rupture life of composite overwrapped pressure vessels (COPVs). Stress rupture life of a COPY has been defined as the minimum time during which the composite maintains structural integrity considering the combined effects of stress levels and time. To assist in the evaluation of the aging COPVs in the Orbiter fleet an analytical reliability model was developed. The actual data used to construct this model was from testing of COPVs constructed of similar, but not exactly same materials and pressure cycles as used on Orbiter vessels. Since no actual Orbiter COPV stress rupture data exists the Space Shuttle Program decided to run a stress rupture test to compare to model predictions. Due to availability of spares, the testing was unfortunately limited to one 40" vessel. The stress rupture test was performed at maximum operating pressure at an elevated temperature to accelerate aging. The test was performed in two phases. The first phase, 130 F, a moderately accelerated test designed to achieve the midpoint of the model predicted point reliability. A more aggressive second phase, performed at 160 F, was designed to determine if the test article will exceed the 95% confidence interval ofthe model. In phase 3, the vessel pressure was increased to above maximum operating pressure while maintaining the phase 2 temperature. After reaching enough effectives hours to reach the 99.99% confidence level of the model phase 4 testing began when the temperature was increased to greater than 170 F. The vessel was maintained at phase 4 conditions until it failed after over 3 million effect hours. This paper will discuss the results of this test, it's implications and possible follow-on testing.

  18. In-Situ NDE Characterization of Kevlar and Carbon Composite Micromechanics for Improved COPV Health Monitoring

    Science.gov (United States)

    Waller, Jess M.; Saulsberry, Regor L.

    2009-01-01

    This project is a subtask of a multi-center project to advance the state-of-the-art by developing NDE techniques that are capable of evaluating stress rupture (SR) degradation in Kevlar/epoxy (K/Ep) composite overwrapped pressure vessels (COPVs), and damage progression in carbon/epoxy (C/Ep) COPVs. In this subtask, acoustic emission (AE) data acquired during intermittent load hold tensile testing of K/Ep and C/Ep composite tow materials-of-construction used in COPV fabrication were analyzed to monitor progressive damage during the approach to tensile failure. Insight into the progressive damage of composite tow was gained by monitoring AE event rate, energy, source location, and frequency. Source location based on arrival time data was used to discern between significant AE attributable to microstructural damage and spurious AE attributable to background and grip noise. One of the significant findings was the observation of increasing violation of the Kaiser effect (Felicity ratio < 1.0) with damage accumulation.

  19. Eddy Current COPV Overwrap and Liner Thickness Measurement System and Data Analysis for 40-Inch Kevlar COPVs SN002 and SN027

    Science.gov (United States)

    Wincheski, Russell A.

    2008-01-01

    As part of the health assessment of flight spare 40in diameter Kevlar composite overwrapped pressure vessels (COPVs) SN002 and SN027 an eddy current characterization of the composite and liner thickness change during pressurization was requested under WSTF-TP-1085-07.A, "Space Shuttle Orbiter Main Propulsion System P/N MC282-0082-0101 S/N 002 and Orbital Maneuvering System P/N MC282-0082-001 S/N 027 COPV Health Assessment." The through the thickness strains have been determined to be an important parameter in the analysis of the reliability and likelihood of stress rupture failure. Eddy current techniques provide a means to measure these thicknesses changes based upon the change in impedance of an eddy current sensor mounted on the exterior of the vessel. Careful probe and technique design have resulted in the capability to independently measure the liner and overwrap thickness changes to better than +/- 0.0005 in. at each sensor location. Descriptions of the inspection system and test results are discussed.

  20. Analysis of Potential for Titanium Liner Buckling after Proof in a Large Kevlar/Epoxy COPV

    Science.gov (United States)

    Phoenix, S. Leigh; Kezirian, Michael T.

    2009-01-01

    We analyze the potential for liner buckling in a 40-in Kevlar49/epoxy overwrapped spherical pressure vessel (COPV) due to long, local depressions or valleys in the titanium liner, which appeared after proof testing (autofrettage). We begin by presenting the geometric characteristics of approximately 20 mil (0.02 in.) deep depressions measured by laser profilometry in several vessels. While such depths were more typical, depths of more than 40 mils (0.02 in.) were seen near the equator in one particular vessel. Such depressions are largely the result of overlap of the edges of overwrap bands (with rectangular cross-section prepreg tows) from the first or second wrap patterns particularly where they start and end. We then discuss the physical mechanisms of formation of the depressions during the autofrettage process in terms of uneven void compaction in the overwrap around the tow overlap lines and the resulting 10-fold increase in through-thickness stiffness of the overwrap. We consider the effects of liner plastic yielding mechanisms in the liner on residual bending moments and interface pressures with the overwrap both at the peak proof pressure (approx.6500 psi) and when reducing the pressure to 0 psi. During depressurization the Bauschinger phenomenon becomes very important whereby extensive yielding in tension reduces the magnitude of the yield threshold in compression by 30 to 40%, compared to the virgin annealed state of the liner titanium. In the absence of a depression, the liner is elastically stable in compression even at liner overwrap interface pressures nominally 6 times the approx. 1000 psi interface pressure that exists at 0 psi. Using a model based on a plate-on-an-elastic-foundation, we develop an extensive analysis of the possible destabilizing effects of a frozen-in valley. The analysis treats the modifying effects of the residual bending moments and interface pressures remaining after the proof hold as well as the Bauschinger effect on the

  1. Bayes Analysis and Reliability Implications of Stress-Rupture Testing a Kevlar/Epoxy COPV Using Temperature and Pressure Acceleration

    Science.gov (United States)

    Phoenix, S. Leigh; Kezirian, Michael T.; Murthy, Pappu L. N.

    2009-01-01

    Composite Overwrapped Pressure Vessels (COPVs) that have survived a long service time under pressure generally must be recertified before service is extended. Flight certification is dependent on the reliability analysis to quantify the risk of stress rupture failure in existing flight vessels. Full certification of this reliability model would require a statistically significant number of lifetime tests to be performed and is impractical given the cost and limited flight hardware for certification testing purposes. One approach to confirm the reliability model is to perform a stress rupture test on a flight COPV. Currently, testing of such a Kevlar49 (Dupont)/epoxy COPV is nearing completion. The present paper focuses on a Bayesian statistical approach to analyze the possible failure time results of this test and to assess the implications in choosing between possible model parameter values that in the past have had significant uncertainty. The key uncertain parameters in this case are the actual fiber stress ratio at operating pressure, and the Weibull shape parameter for lifetime; the former has been uncertain due to ambiguities in interpreting the original and a duplicate burst test. The latter has been uncertain due to major differences between COPVs in the database and the actual COPVs in service. Any information obtained that clarifies and eliminates uncertainty in these parameters will have a major effect on the predicted reliability of the service COPVs going forward. The key result is that the longer the vessel survives, the more likely the more optimistic stress ratio model is correct. At the time of writing, the resulting effect on predicted future reliability is dramatic, increasing it by about one "nine," that is, reducing the predicted probability of failure by an order of magnitude. However, testing one vessel does not change the uncertainty on the Weibull shape parameter for lifetime since testing several vessels would be necessary.

  2. Introductory quantum mechanics for applied nanotechnology

    CERN Document Server

    Kim, Dae Mann

    2015-01-01

    This introductory textbook covers fundamental quantum mechanics from an application perspective, considering optoelectronic devices, biological sensors and molecular imagers as well as solar cells and field effect transistors. The book provides a brief review of classical and statistical mechanics and electromagnetism, and then turns to the quantum treatment of atoms, molecules, and chemical bonds. Aiming at senior undergraduate and graduate students in nanotechnology related areas like physics, materials science, and engineering, the book could be used at schools that offer interdisciplinary but focused training for future workers in the semiconductor industry and for the increasing number of related nanotechnology firms, and even practicing people could use it when they need to learn related concepts. The author is Professor Dae Mann Kim from the Korea Institute for Advanced Study who has been teaching Quantum Mechanics to engineering, material science and physics students for over 25 years in USA and Asia.

  3. 22nd International Congress of Theoretical and Applied Mechanics

    CERN Document Server

    Finn, Matthew

    2013-01-01

    The 22nd International Congress of Theoretical and Applied Mechanics (ICTAM) of the International Union of Theoretical and Applied Mechanics was hosted by the Australasian mechanics community in the city of Adelaide during the last week of August 2008. Over 1200 delegates met to discuss the latest development in the fields of theoretical and applied mechanics. This volume records the events of the congress and contains selected papers from the sectional lectures and invited lectures presented at the congresses six mini-symposia.

  4. Bioinspiration: applying mechanical design to experimental biology.

    Science.gov (United States)

    Flammang, Brooke E; Porter, Marianne E

    2011-07-01

    The production of bioinspired and biomimetic constructs has fostered much collaboration between biologists and engineers, although the extent of biological accuracy employed in the designs produced has not always been a priority. Even the exact definitions of "bioinspired" and "biomimetic" differ among biologists, engineers, and industrial designers, leading to confusion regarding the level of integration and replication of biological principles and physiology. By any name, biologically-inspired mechanical constructs have become an increasingly important research tool in experimental biology, offering the opportunity to focus research by creating model organisms that can be easily manipulated to fill a desired parameter space of structural and functional repertoires. Innovative researchers with both biological and engineering backgrounds have found ways to use bioinspired models to explore the biomechanics of organisms from all kingdoms to answer a variety of different questions. Bringing together these biologists and engineers will hopefully result in an open discourse of techniques and fruitful collaborations for experimental and industrial endeavors.

  5. Applied fluid mechanics; Mecanique des fluides appliquee

    Energy Technology Data Exchange (ETDEWEB)

    Viollet, P.L.; Chabard, J.P.; Esposito, P.; Laurence, D. [Ecole Nationale des Ponts et Chaussees (ENPC), 75 - Paris (France)]|[Electricite de France (EDF), 75 - Paris (France). Direction des Etudes et Recherches

    2002-07-01

    Computational hydraulics, computational fluid dynamics, and hydro-informatics have invaded virtually all domains of research and application in hydro-science and fluids engineering. To the extent that this invasion has led to improved understanding of complex fluid phenomena and provided a frame of reference for testing and verifying designs and operational schemes, we have all benefited from it. But to the extent that it has shifted attention away from fundamental descriptions and understanding of fluid phenomena, and toward computational and numerical issues, this invasion has left avoid in the scientific and technical literature. This void exists somewhere between student exposure to first principles of solid and fluid mechanics on the one hand, and advanced-student and researcher/practitioner exposure to computational techniques and applications on the other. This new text naturally and refreshingly steps in to fill this void, and as such is a most welcome addition to the literature and to personal and institutional libraries. The text is refreshing in its innovative and careful attention to setting the historical framework of general and specific topics. This is most notable in the first chapter, which very gracefully and efficiently leads the reader through historical developments to contemporary mathematical statements of basic fluid phenomena. Once the authors have established this foundation of fundamental principles, they tie each succeeding chapter back into the introduction with appropriate and supportive historical contexts. Although the text does not shy away from rigorous analytical descriptions of fluid phenomena, it is unique in providing this delightful historical context for each topic. The authors have also made a special effort to tie the chapters together into a unified whole, with ample references forward and back; this is indeed rare, and much appreciated, in a text of multiple authorship. The topics treated and chapter structures reflect

  6. Reliability of COPVs Accounting for Margin of Safety on Design Burst

    Science.gov (United States)

    Murthy, Pappu L.N.

    2012-01-01

    In this paper, the stress rupture reliability of Carbon/Epoxy Composite Overwrapped Pressure Vessels (COPVs) is examined utilizing the classic Phoenix model and accounting for the differences between the design and the actual burst pressure, and the liner contribution effects. Stress rupture life primarily depends upon the fiber stress ratio which is defined as the ratio of stress in fibers at the maximum expected operating pressure to actual delivered fiber strength. The actual delivered fiber strength is calculated using the actual burst pressures of vessels established through burst tests. However, during the design phase the actual burst pressure is generally not known and to estimate the reliability of the vessels calculations are usually performed based upon the design burst pressure only. Since the design burst is lower than the actual burst, this process yields a much higher value for the stress ratio and consequently a conservative estimate for the reliability. Other complications arise due to the fact that the actual burst pressure and the liner contributions have inherent variability and therefore must be treated as random variables in order to compute the stress rupture reliability. Furthermore, the model parameters, which have to be established based on stress rupture tests of subscale vessels or coupons, have significant variability as well due to limited available data and hence must be properly accounted for. In this work an assessment of reliability of COPVs including both parameter uncertainties and physical variability inherent in liner and overwrap material behavior is made and estimates are provided in terms of degree of uncertainty in the actual burst pressure and the liner load sharing.

  7. 2012 Annual Conference on Experimental and Applied Mechanics

    CERN Document Server

    Crone, Wendy; Jin, Helena; Sciammarella, Cesar; Furlong, Cosme; Furlong, Cosme; Chalivendra, Vijay; Song, Bo; Casem, Daniel; Antoun, Bonnie; Qi, H; Hall, Richard; Tandon, GP; Lu, Hongbing; Lu, Charles; Yoshida, Sanichiro; Shaw, Gordon; Prorok, Barton; Barthelat, François; Korach, Chad; Grande-Allen, K; Lipke, Elizabeth; Lykofatitits, George; Zavattieri, Pablo; Starman, LaVern; Patterson, Eann; Backman, David; Cloud, Gary; Vol.1 Dynamic Behavior of Materials; Vol.2 Challenges in Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials; Vol.3 Imaging Methods for Novel Materials and Challenging Applications; Vol.4 Experimental and Applied Mechanics; Vol.5 Mechanics of Biological Systems and Materials; Vol.6 MEMS and Nanotechnology; Vol.7 Composite Materials and Joining Technologies for Composites

    2013-01-01

    Experimental and Applied Mechanics, Volume 4: Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics, the fourth volume of seven from the Conference, brings together 54 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental and Applied Mechanics, including papers on:  Fracture & Fatigue Microscale & Microstructural Effects in Fatigue & Fracture Material Applications Composite Characterization Using Digital Image Correlation Techniques Multi-Scale Simulation and Testing of Composites Residual Stress Inverse Problems/Hybrid Methods Nano-Composites Microstructure Material Characterization Modeling and Uncertainty Quantification Impact Behavior of Composites.

  8. 2014 Annual Conference on Experimental and Applied Mechanics

    CERN Document Server

    Korach, Chad; Zavattieri, Pablo; Prorok, Barton; Grande-Allen, K; Carroll, Jay; Daly, Samantha; Qi, H; Antoun, Bonnie; Hall, Richard; Lu, Hongbing; Arzoumanidis, Alex; Silberstein, Meredith; Furmanski, Jevan; Amirkhizi, Alireza; Gonzalez-Gutierrez, Joamin; Jin, Helena; Sciammarella, Cesar; Yoshida, Sanichiro; Lamberti, Luciano; Sottos, Nancy; Rowlands, Robert; Dannemann, Kathryn; Tandon, Gyaneshwar; Song, Bo; Casem, Daniel; Kimberley, Jamie; Starman, LaVern; Hay, Jennifer; Shaw, Gordon

    2015-01-01

    Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics, the seventh volume of eight from the Conference, brings together contributions to this important area of research and engineering.  The collection presents early findings and case studies on a wide range of areas, including: Soft Tissues Mechanics Natural Materials & Bio-Inspiration Tissue Engineering Cells Mechanics

  9. [Research activities in applied mathematics, fluid mechanics, and computer science

    Science.gov (United States)

    1995-01-01

    This report summarizes research conducted at the Institute for Computer Applications in Science and Engineering in applied mathematics, fluid mechanics, and computer science during the period April 1, 1995 through September 30, 1995.

  10. Research in Applied Mathematics, Fluid Mechanics and Computer Science

    Science.gov (United States)

    1999-01-01

    This report summarizes research conducted at the Institute for Computer Applications in Science and Engineering in applied mathematics, fluid mechanics, and computer science during the period October 1, 1998 through March 31, 1999.

  11. 2016 Annual Conference on Experimental and Applied Mechanics

    CERN Document Server

    Lamberson, Leslie; Kimberley, Jamie; Korach, Chad; Tekalur, Srinivasan; Zavattieri, Pablo; Yoshida, Sanichiro; Lamberti, Luciano; Sciammarella, Cesar; Ralph, W; Singh, Raman; Tandon, Gyaneshwar; Thakre, Piyush; Zavattieri, Pablo; Zhu, Yong; Zehnder, Alan; Zehnder, Alan; Carroll, Jay; Hazeli, Kavan; Berke, Ryan; Pataky, Garrett; Cavalli, Matthew; Beese, Alison; Xia, Shuman; Starman, La; Hay, Jennifer; Karanjgaokar, Nikhil; Quinn, Simon; Balandraud, Xavier; Cloud, Gary; Patterson, Eann; Backman, David

    2017-01-01

    Dynamic Behavior of Materials, Volume 1 of the Proceedings of the 2016 SEM Annual Conference& Exposition on Experimental and Applied Mechanics, the first volume of ten from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers on: Quantitative Visualization Fracture & Fragmentation Dynamic Behavior of Low Impedance Materials Shock & Blast Dynamic Behavior of Composites Novel Testing Techniques Hybrid Experimental & Computational Methods Dynamic Behavior of Geo-materials General Material Behavior.

  12. INNOVATIVE SOLUTIONS APPLIED IN TOOLS FOR DETERMINING COAL MECHANICAL PROPRERTIES

    Directory of Open Access Journals (Sweden)

    Witold BIAŁY

    2015-10-01

    Full Text Available Due to very specific conditions of work of machines and equipment used in coal mining industry, the manner of their selection, taking into account the changing working conditions, is very important. Appropriate selection influences the increased durability and reliability of machines and equipment, which translates into the economic effects achieved. As the issue of measurement and evaluation of coal mechanical properties (including coal workability measurement is of great importance, previously applied methods for coal workability evaluation have been shortly reviewed. The im-portance of the problem is confirmed by the number of methods developed in various research centres all over the world. The article presents new instruments for determining and evaluating the mechanical properties of coal material (workability. The instruments have been developed in Poland and the author of this article is their co-inventor. The construction, principle of operation and innovative character of solutions applied in the instruments have been presented.

  13. 2013 Annual Conference on Experimental and Applied Mechanics

    CERN Document Server

    Casem, Dan; Kimberley, Jamie; Barthelat, François; Zavattieri, Pablo; Antoun, Bonnie; Qi, H; Hall, Richard; Tandon, G; Lu, Hongbing; Lu, Charles; Furmanski, Jevan; Amirkhizi, Alireza; Korach, Chad; Prorok, Barton; Grande-Allen, K; III, Gordon; Prorok, Barton; Starman, LaVern; Furlong, Cosme; Tandon, G; Tekalur, Srinivasan; Ralph, Carter; Sottos, Nancy; Blaiszik, Benjamin; Jay, Carroll; Rossi, Marco; Sasso, Marco; Connesson, Nathanael; Singh, Raman; DeWald, Adrian; Backman, David; Gloeckner, Paul; Jin, Helena; Sciammarella, Cesar; Yoshida, Sanichiro; Lamberti, Luciano; Vol.1 Dynamic Behavior of Materials; Vol.2 Challenges In Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials; Vol.3 Advancement of Optical Methods in Experimental Mechanics; Vol.4 Mechanics of Biological Systems and Materials; Vol.5 MEMS and Nanotechnology; Vol.6 Experimental Mechanics of Composite, Hybrid, and Multifunctional Materials; Vol.7 Fracture and Fatigue; Vol.8 Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems; SEM 2013

    2014-01-01

    This critical collection examines a range of topics in fracture and fatigue, including environmental and loading effects in fracture and fatigue and DIC and fracture, as presented in early findings and case studies from the Proceedings of the 2013 Annual Conference on Experimental and Applied Mechanics. The collection includes papers in the following general technical research areas: • Microstructural Effects in Fatigue & Fracture • Fracture of Interfaces • Fracture of Composites and Interface Cracks • Fatigue & Fracture: Environmental & Loading Eff ects • Fracture & Digital Image Correlation Fracture and Fatigue

  14. Classical mechanics approach applied to analysis of genetic oscillators.

    Science.gov (United States)

    Vasylchenkova, Anastasiia; Mraz, Miha; Zimic, Nikolaj; Moskon, Miha

    2016-04-05

    Biological oscillators present a fundamental part of several regulatory mechanisms that control the response of various biological systems. Several analytical approaches for their analysis have been reported recently. They are, however, limited to only specific oscillator topologies and/or to giving only qualitative answers, i.e., is the dynamics of an oscillator given the parameter space oscillatory or not. Here we present a general analytical approach that can be applied to the analysis of biological oscillators. It relies on the projection of biological systems to classical mechanics systems. The approach is able to provide us with relatively accurate results in the meaning of type of behaviour system reflects (i.e. oscillatory or not) and periods of potential oscillations without the necessity to conduct expensive numerical simulations. We demonstrate and verify the proposed approach on three different implementations of amplified negative feedback oscillator.

  15. Acoustic Emission Technique Applied in Textiles Mechanical Characterization

    Directory of Open Access Journals (Sweden)

    Rios-Soberanis Carlos Rolando

    2017-01-01

    Full Text Available The common textile architecture/geometry are woven, braided, knitted, stitch boded, and Z-pinned. Fibres in textile form exhibit good out-of-plane properties and good fatigue and impact resistance, additionally, they have better dimensional stability and conformability. Besides the nature of the textile, the architecture has a great role in the mechanical behaviour and mechanisms of damage in textiles, therefore damage mechanisms and mechanical performance in structural applications textiles have been a major concern. Mechanical damage occurs to a large extent during the service lifetime consequently it is vital to understand the material mechanical behaviour by identifying its mechanisms of failure such as onset of damage, crack generation and propagation. In this work, textiles of different architecture were used to manufacture epoxy based composites in order to study failure events under tensile load by using acoustic emission technique which is a powerful characterization tool due to its link between AE data and fracture mechanics, which makes this relation a very useful from the engineering point of view.

  16. Molecular mechanics applied to single-walled carbon nanotubes

    Directory of Open Access Journals (Sweden)

    Antonio Ferreira Ávila

    2008-09-01

    Full Text Available Single-walled carbon nanotubes, with stiffness of 1.0 TPa and strength of 60 GPa, are a natural choice for high strength materials. A problem, however, arises when experimental data are compiled. The large variability of experimental data leads to the development of numerical models denominated molecular mechanics, which is a "symbiotic" association of molecular dynamics and solid mechanics. This paper deals with molecular mechanics simulations of single-walled carbon nanotubes. To be able to evaluate the molecular mechanics model, the three major carbon nanotube configurations (armchair, zigzag and chiral were simulated. It was proven that the carbon nanotube configuration has influence on stiffness. By varying the radius, hence the curvature, the Young's modulus changed from 0.95 TPa to 5.5 TPa, and the Poisson's ratio ranged from 0.15 to 0.29. The numerical simulations were in good agreement with those presented in the literature.

  17. Mechanism of Carbon Nanotubes Aligning along Applied Electric Field

    Institute of Scientific and Technical Information of China (English)

    MA Shao-Jie; GUO Wan-Lin

    2008-01-01

    The mechanism of single-walled carbon nanotubes (SWCNTS)aligning in the direction of external electric field is studied by quantum mechanics calculations.The rotational torque on the carbon nanotubes is proportional to the difference between the longitudinal and transverse polarizabilities and varies with the angle of SWCNTs to the external electric field.The longitudinal polarizability increases with second power of length,while the transverse polarizability increases linearly with length.A zigzag SWCNT has larger longitudinal and transverse polarizabilities than an armchair SWCNT with the same diameter and the discrepancy becomes larger for longer tubes.

  18. Fracture mechanics applied to the machining of brittle materials

    Energy Technology Data Exchange (ETDEWEB)

    Hiatt, G.D.; Strenkowski, J.S.

    1988-12-01

    Research has begun on incorporating fracture mechanics into a model of the orthogonal cutting of brittle materials. Residual stresses are calculated for the machined material by a combination of Eulerian and Lagrangian finite element models and then used in the calculation of stress intensity factors by the Green`s Function Method.

  19. Applying quantum mechanics to macroscopic and mesoscopic systems

    CERN Document Server

    T., N Poveda

    2012-01-01

    There exists a paradigm in which Quantum Mechanics is an exclusively developed theory to explain phenomena on a microscopic scale. As the Planck's constant is extremely small, $h\\sim10^{-34}{J.s}$, and as in the relation of de Broglie the wavelength is inversely proportional to the momentum; for a mesoscopic or macroscopic object the Broglie wavelength is very small, and consequently the undulatory behavior of this object is undetectable. In this paper we show that with a particle oscillating around its classical trajectory, the action is an integer multiple of a quantum of action, $S = nh_{o}$. The quantum of action, $h_{o}$, which plays a role equivalent to Planck's constant, is a free parameter that must be determined and depends on the physical system considered. For a mesoscopic and macroscopic system: $h_{o}\\gg h$, this allows us to describe these systems with the formalism of quantum mechanics.

  20. Applied environmental fluid mechanics: what's the weather in your backyard?

    Science.gov (United States)

    Chow, F. K.

    2011-12-01

    The microclimates of the San Francisco Bay Area can lead to 30-40F differences in temperature from the coast to just 30 miles inland. The reasons for this include local topography which affects development of the atmospheric boundary layer. A Bay Area resident's experience of fog, air pollution, and weather events therefore differs greatly depending on exactly where they live. Such local weather phenomena provide a natural topic for introduction to boundary layer processes and are the basis of a new course developed at the University of California, Berkeley. This course complements the PI's research focus on numerical methods applied to atmospheric boundary layer flow over complex terrain. This new outreach and research-based course was created to teach students about the boundary layer and teach them how to use a community weather prediction model, WRF, to simulate conditions in the local area, while at the same time being actively involved in public outreach. The course was offered in the Civil and Environmental Engineering department with the collaboration and support of the Lawrence Hall of Science, Berkeley's public science museum. The students chose topics such as air quality, wind energy, climate change, and plume dispersion, all applied to the local San Francisco Bay Area. The students conducted independent research on their team projects, involving literature reviews, numerical model setup, and analysis of model results through comparison with field observations. The outreach component of the course included website design and culminated in demonstrations at the Lawrence Hall of Science. The seven student teams presented hands-on demos to 300-400 visitors, mostly kids 4-9 years old and their parents. Involving students directly in outreach efforts is hoped to encourage continued integration of research and education in their own careers. Early exposure to numerical modeling also improves student technical skills for future career experiences . Given

  1. Local-equilibrium formalism applied to mechanics of solids

    Energy Technology Data Exchange (ETDEWEB)

    Kestin, J.

    1992-01-01

    The lecture starts with an expression of good wishes to George Herrmann on the occasion of his seventieth birthday and continues with a lament that the majority of research workers in the field of solid mechanics have failed to appreciate the power and relevance of conventional'' thermodynamics which is based on the acceptance of the hypothesis of local equilibrium (principle of local state). The lecture then proceeds to motivate the essential concepts of conventional thermodynamics and emphasizes the differences between the description of nonequilibrium states in physical space and equilibrium states in the Gibbsian phase space. It is asserted that the subject acquires its simplest form by the recognition of the relevance of Bridgman's internal variables. With their aid it is possible to define the accompanying equilibrium state and the accompanying reversible process. An elimination of internal energy between the field equation of energy (First Law) and the Gibbs equation in rate form results in an explicit expression for the local rate of entropy production, {theta}. It is asserted that the preceding elements supplemented with appropriate rate equations result in a closed system of partial differential equations whose solution, subject to appropriate initial and boundary conditions, constitutes the process ( history'') under consideration. 11 refs.

  2. Local-equilibrium formalism applied to mechanics of solids

    Energy Technology Data Exchange (ETDEWEB)

    Kestin, J.

    1992-08-01

    The lecture starts with an expression of good wishes to George Herrmann on the occasion of his seventieth birthday and continues with a lament that the majority of research workers in the field of solid mechanics have failed to appreciate the power and relevance of ``conventional`` thermodynamics which is based on the acceptance of the hypothesis of local equilibrium (principle of local state). The lecture then proceeds to motivate the essential concepts of conventional thermodynamics and emphasizes the differences between the description of nonequilibrium states in physical space and equilibrium states in the Gibbsian phase space. It is asserted that the subject acquires its simplest form by the recognition of the relevance of Bridgman`s internal variables. With their aid it is possible to define the accompanying equilibrium state and the accompanying reversible process. An elimination of internal energy between the field equation of energy (First Law) and the Gibbs equation in rate form results in an explicit expression for the local rate of entropy production, {theta}. It is asserted that the preceding elements supplemented with appropriate rate equations result in a closed system of partial differential equations whose solution, subject to appropriate initial and boundary conditions, constitutes the process (``history``) under consideration. 11 refs.

  3. ?Smart COPVs? - Continued Successful Development of JSC IR&D Acoustic Emissions (AE) SHM Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Develop and apply promising quantitative pass/fail criteria to CPV using acoustic emission (AE) and lay the foundation for continued development of an automated...

  4. Applied mechanics and mechatronics special topic volume with invited peer reviewed papers only

    CERN Document Server

    Trebuňa, František

    2014-01-01

    The issue ""Applied Mechanics and Mechatronics"" contains results of research from researchers and designers from several prominent universities and research institutes of Central Europe.The publication is divided into three following chapters: Modeling and Simulation of Mechanic and Mechatronic SystemsAnalysis and Design of Mechanic and Mechatronic SystemsExperimental methods in Mechanics and Mechatronics. The submitted publication provides insight on modern approaches and methods in designing, modeling and experimental analyzing of mechanic and mechatronics systems.

  5. Research in progress in applied mathematics, numerical analysis, fluid mechanics, and computer science

    Science.gov (United States)

    1994-01-01

    This report summarizes research conducted at the Institute for Computer Applications in Science and Engineering in applied mathematics, fluid mechanics, and computer science during the period October 1, 1993 through March 31, 1994. The major categories of the current ICASE research program are: (1) applied and numerical mathematics, including numerical analysis and algorithm development; (2) theoretical and computational research in fluid mechanics in selected areas of interest to LaRC, including acoustics and combustion; (3) experimental research in transition and turbulence and aerodynamics involving LaRC facilities and scientists; and (4) computer science.

  6. Methods for Increasing Power Efficiency of Heating Furnaces Applied in Metallurgical and Mechanical Engineering Industries

    Directory of Open Access Journals (Sweden)

    M. L. German

    2011-01-01

    Full Text Available  The paper analyzes experimental data and results of balance tests of two continuous heating furnaces applied in mechanical engineering and metallurgical industries. Furnace power technological characteristics  and dependences of these characteristics on equipment productivity have been determined in the paper. The analysis has made it possible to reveal reasons of higher efficiency of a heating furnace used at BSW Rolling Mill-320 and formulate recommendations on reduction of fuel consumption in operating and designed combustion furnaces applied in mechanical engineering and metallurgical industries.

  7. Teaching Fluid Mechanics for Undergraduate Students in Applied Industrial Biology: from Theory to Atypical Experiments

    CERN Document Server

    Absi, Rafik; Dufour, Florence; Huet, Denis; Bennacer, Rachid; Absi, Tahar

    2011-01-01

    EBI is a further education establishment which provides education in applied industrial biology at level of MSc engineering degree. Fluid mechanics at EBI was considered by students as difficult who seemed somewhat unmotivated. In order to motivate them, we applied a new play-based pedagogy. Students were asked to draw inspiration from everyday life situations to find applications of fluid mechanics and to do experiments to verify and validate some theoretical results obtained in course. In this paper, we present an innovative teaching/learning pedagogy which includes the concept of learning through play and its implications in fluid mechanics for engineering. Examples of atypical experiments in fluid mechanics made by students are presented. Based on teaching evaluation by students, it is possible to know how students feel the course. The effectiveness of this approach to motivate students is presented through an analysis of students' teaching assessment. Learning through play proved a great success in fluid...

  8. Rheological properties and mechanical stability of new gel-entrapment systems applied in bioreactors

    NARCIS (Netherlands)

    Vogelsang, C.; Wijffels, R.H.; Ostgaard, K.

    2000-01-01

    The mechanical stability of gels applied for entrapment and retention of biocatalysts in bioreactors is of crucial importance for successful scale-up applications. Gel abrasion in agitated reactors will depend on liquid shear, bubble shear, and wall shear, as well as collisions between the gel parti

  9. Applying math onto mechanisms: mechanistic knowledge is associated with the use of formal mathematical strategies.

    Science.gov (United States)

    Liu, Allison S; Schunn, Christian D

    2017-01-01

    It is notoriously difficult for people to adaptively apply formal mathematical strategies learned in school to real-world contexts, even when they possess the required mathematical skills. The current study explores whether a problem context's mechanism can act as an "embodied analogy" onto which abstract mathematical concepts can be applied, leading to more frequent use of formal mathematical strategies. Participants were asked to program a robot to navigate a maze and to create a navigation strategy that would work for differently sized robots. We compared the strategy complexity of participants with high levels of mechanistic knowledge about the robot against participants with low levels of mechanistic knowledge about the robot. Mechanistic knowledge was significantly associated with the frequency and complexity of the mathematical strategies used by participants, suggesting that learning to recognize a problem context's mechanism may promote independent mathematical problem solving in applied contexts.

  10. Interdisciplinary Research Drivers and Serendipity Factor: An Applied Mechanics Perspective on Some Past Application Platforms

    Directory of Open Access Journals (Sweden)

    Chih-Kung Lee

    2014-11-01

    Full Text Available In recent years, interdisciplinary research has been the main focus of academia, research institutes, and industry.  Out of the many interdisciplinary research fields, Applied Mechanics continues to play an essential role due to its fundamental nature and its influence to many emerging fields.  The search for the appropriate interdisciplinary organization, either through a matrix organization or by a formal organization, has been a focus of concern within the Applied Mechanics leadership.  This paper represents an attempt to reflect on the lessons learned from the rise and fall of the field of Theoretical & Applied Mechanics at various universities and institutes around the world.  In looking through the historical development of the field of Applied Mechanics, we can gain a better understanding of the driving forces of interdisciplinary research organizations.  The collaborations and competition between the various disciplinary research institutes and the more traditional engineering/applied sciences departments will be briefly discussed.  Based on a series of research and development experiences using Nano-BioMEMS/NEMS, Smart Structures, and Electrets as application platforms, we will look at the theoretical architecture and corresponding applications to further strengthen our claim that successful interdisciplinary applied science research requires the establishment of strong industries.  We look at today’s perspective with an added serendipity factor.  This is to say that a prepared mind, derived from a well-trained background, along with an open mind connected to other collaborative research efforts, will know when to seize the moment as new innovative opportunities arise.  We can look on same examples from the past to obtain some hints on how to further foster today’s interdisciplinary research.  The influence of an interdisciplinary organizational structure, its teamwork collaborative framework as well as the influence of

  11. Use of magnetic particles to apply mechanical forces for bone tissue engineering purposes

    Energy Technology Data Exchange (ETDEWEB)

    Cartmell, S H; Keramane, A; Kirkham, G R; Verschueren, S B; Magnay, J L; El Haj, A J; Dobson, J [Institute of Science and Technology in Medicine, University of Keele, Thornburrow Drive, Hartshill, Stoke-on-Trent, Staffordshire ST4 7QB (United Kingdom)

    2005-01-01

    It is possible to influence osteoblast activity by the application of mechanical forces. There is potential in using these forces for tissue engineering applications in that cell matrix production may be upregulated, resulting in a functional tissue engineered construct created in a shorter culture time. We have been developing a novel technique for applying mechanical forces directly to the cell with the use of magnetic particles. Particles attached to the cell membrane can be manipulated using an external magnetic field thus applying forces in the piconewton range. We have previously demonstrated that primary human osteoblasts respond to this type of stimulus by upregulating bone related gene expression and producing mineralized matrix at early time points. In this paper we discuss the optimization of this technique by presenting data on the effects of this type of force on osteoblast proliferation, phagocytosis and also the potential use of this technique in developing 3D tissue engineered constructs.

  12. Comprehensive Mechanisms for Combustion Chemistry: An Experimental and Numerical Study with Emphasis on Applied Sensitivity Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Dryer, Frederick L.

    2009-04-10

    This project was an integrated experimental/numerical effort to study pyrolysis and oxidation reactions and mechanisms for small-molecule hydrocarbon structures under conditions representative of combustion environments. The experimental aspects of the work were conducted in large-diameter flow reactors, at 0.3 to 18 atm pressure, 500 to 1100 K temperature, and 10-2 to 2 seconds reaction time. Experiments were also conducted to determine reference laminar flame speeds using a premixed laminar stagnation flame experiment and particle image velocimetry, as well as pressurized bomb experiments. Flow reactor data for oxidation experiments include: (1)adiabatic/isothermal species time-histories of a reaction under fixed initial pressure, temperature, and composition; to determine the species present after a fixed reaction time, initial pressure; (2)species distributions with varying initial reaction temperature; (3)perturbations of a well-defined reaction systems (e.g. CO/H2/O2 or H2/O2)by the addition of small amounts of an additive species. Radical scavenging techniques are applied to determine unimolecular decomposition rates from pyrolysis experiments. Laminar flame speed measurements are determined as a function of equivalence ratio, dilution, and unburned gas temperature at 1 atm pressure. Hierarchical, comprehensive mechanistic construction methods were applied to develop detailed kinetic mechanisms which describe the measurements and literature kinetic data. Modeling using well-defined and validated mechanisms for the CO/H2/Oxidant systems and perturbations of oxidation experiments by small amounts of additives were also used to derive absolute reaction rates and to investigate the compatibility of published elementary kinetic and thermochemical information. Numerical tools were developed and applied to assess the importance of individual elementary reactions to the predictive performance of the

  13. Improvement of water transport mechanisms during potato drying by applying ultrasound.

    Science.gov (United States)

    Ozuna, César; Cárcel, Juan A; García-Pérez, José V; Mulet, Antonio

    2011-11-01

    The drying rate of vegetables is limited by internal moisture diffusion and convective transport mechanisms. The increase of drying air temperature leads to faster water mobility; however, it provokes quality loss in the product and presents a higher energy demand. Therefore, the search for new strategies to improve water mobility during convective drying constitutes a topic of relevant research. The aim of this work was to evaluate the use of power ultrasound to improve convective drying of potato and quantify the influence of the applied power in the water transport mechanisms. Drying kinetics of potato cubes were increased by the ultrasonic application. The influence of power ultrasound was dependent on the ultrasonic power (from 0 to 37 kW m(-3) ), the higher the applied power, the faster the drying kinetic. The diffusion model considering external resistance to mass transfer provided a good fit of drying kinetics. From modelling, it was observed a proportional and significant (P diffusivity and mass transfer coefficient. The ultrasonic application during drying represents an interesting alternative to traditional convective drying by shortening drying time, which may involve an energy saving concerning industrial applications. In addition, the ultrasonic effect in the water transport is based on mechanical phenomena with a low heating capacity, which is highly relevant for drying heat sensitive materials and also for obtaining high-quality dry products. Copyright © 2011 Society of Chemical Industry.

  14. DEPENDENCY OF OSTEOGENIC EFFECTS ON CHARACTERISTICS OF MECHANICAL LOAD APPLIED TO OSSEOUS STRUCTURES

    Directory of Open Access Journals (Sweden)

    A. S. Avrunin

    2016-01-01

    Full Text Available Purpose of the study: to evaluate osteogenic rate of various characteristics of mechanical loading based on the authors’ data as well as literature analysis.Literature analysis proved that clinical outcome of physical training can be achieved not only by increasing the mechanical load but also by altering number of load iterations, rate of load acceleration, frequency of cyclic load, rest interval, distribution of load across the skeleton. Presented data provides a reasonable basis to apply alterations of all above-mentioned load characteristics to obtain clinical effect and customize every single baseline exercise plan to gain a maximum treatment and preventive effect in individuals with high risk of osteoporotic fractures.

  15. Understanding reaction mechanisms in organic chemistry from catastrophe theory applied to the electron localization function topology.

    Science.gov (United States)

    Polo, Victor; Andres, Juan; Berski, Slawomir; Domingo, Luis R; Silvi, Bernard

    2008-08-07

    Thom's catastrophe theory applied to the evolution of the topology of the electron localization function (ELF) gradient field constitutes a way to rationalize the reorganization of electron pairing and a powerful tool for the unambiguous determination of the molecular mechanisms of a given chemical reaction. The identification of the turning points connecting the ELF structural stability domains along the reaction pathway allows a rigorous characterization of the sequence of electron pair rearrangements taking place during a chemical transformation, such as multiple bond forming/breaking processes, ring closure processes, creation/annihilation of lone pairs, transformations of C-C multiple bonds into single ones. The reaction mechanism of some relevant organic reactions: Diels-Alder, 1,3-dipolar cycloaddition and Cope rearrangement are reviewed to illustrate the potential of the present approach.

  16. A review on: atomic force microscopy applied to nano-mechanics of the cell.

    Science.gov (United States)

    Ikai, Atsushi

    2010-01-01

    Since its introduction in 1986, AFM has been applied to biological studies along with its widespread use in physics, chemistry and engineering fields. Due to its dual capabilities of imaging nano-materials with an atomic level resolution and of directly manipulating samples with high precision, AFM is now considered an indispensable instrument for nano-technological researchers especially in physically oriented fields. In biology in general, however, and in biotechnology in particular, its usefulness must be critically examined and, if necessary as it certainly is, further explored from a practical point of view. In this review, a new trend of applying AFM based technology to elucidate the mechanical basis of the cellular structure and its interaction with the extracellular matrix including cell to cell interaction is reviewed. Some of the recent studies done by using other force measuring or force exerting methods are also covered in the hope that all the nano-mechanical work on the cellular level will eventually contribute to the emergence of the mechano-chemical view of the cell in a unified manner.

  17. Application of symbolic and algebraic manipulation software in solving applied mechanics problems

    Science.gov (United States)

    Tsai, Wen-Lang; Kikuchi, Noboru

    1993-01-01

    As its name implies, symbolic and algebraic manipulation is an operational tool which not only can retain symbols throughout computations but also can express results in terms of symbols. This report starts with a history of symbolic and algebraic manipulators and a review of the literatures. With the help of selected examples, the capabilities of symbolic and algebraic manipulators are demonstrated. These applications to problems of applied mechanics are then presented. They are the application of automatic formulation to applied mechanics problems, application to a materially nonlinear problem (rigid-plastic ring compression) by finite element method (FEM) and application to plate problems by FEM. The advantages and difficulties, contributions, education, and perspectives of symbolic and algebraic manipulation are discussed. It is well known that there exist some fundamental difficulties in symbolic and algebraic manipulation, such as internal swelling and mathematical limitation. A remedy for these difficulties is proposed, and the three applications mentioned are solved successfully. For example, the closed from solution of stiffness matrix of four-node isoparametrical quadrilateral element for 2-D elasticity problem was not available before. Due to the work presented, the automatic construction of it becomes feasible. In addition, a new advantage of the application of symbolic and algebraic manipulation found is believed to be crucial in improving the efficiency of program execution in the future. This will substantially shorten the response time of a system. It is very significant for certain systems, such as missile and high speed aircraft systems, in which time plays an important role.

  18. A Study of Parameters Affecting Fibroblast Morphology in Response to an Applied Mechanical Force

    Science.gov (United States)

    Grymes, Rosalind A.; Sawyer, Christine

    1994-01-01

    A precisely controlled stretch/relaxation regimen (20% elongation at 6.6 cycles/min) was applied to normal human fetal, neonatal and aged dermal fibroblasts cultured on flexible membranes. Culture conditions included poly (NH2) or collagen type I coated substrate membranes; control cultures were grown on the same pliable material in the absence of applied stretch. Direct observation and immunofluorescence analyses revealed a progressive change in cell body orientation limited to the stretched dermal fibroblast cultures. Monolayers gradually (over 4 days) acquired a symmetric, radial distribution equivalent to the biaxial array of the applied force. At high seeding density, alignment was inhibited in the fetal cell cultures. This cell strain required collagen type I coating for optimal attachment to the flexible membrane, preferring growth in three-dimensional cell 'balls' on the poly(NH2) coated substrate. Neonatal cells also required the collagen type I coating, but both neonatal and aged dermal fibroblasts aligned efficiently at all seeding densities examined. The randomly oriented neonatal cells on the unstretched control membranes spontaneously detached at confluence, as a single cell sheet. Their aligned counterparts did not detach until the applied stretch stimulus was removed. Low concentrations of cytochalasin D (62.5 ng/ml) disrupted the stretch-related alignment response. Rhodamine phalloidin staining visualized fewer actin stress fibers in stretched, aligned cells than in controls. Both intercellular interactions and cytoskeletal integrity mediate the response to mechanical strain. Normal rabbit corneal stroma fibroblasts (NRC) were also analyzed, and failed to orient under these conditions. This cell type may require a different regimen, or a longer time period, to demonstrate alignment behavior. Supported by NASA Space Biology RTOP 199-40-22 and the NASA-ARC Director's Discretionary Fund.

  19. Tissue heterogeneity as a mechanism for localized neural stimulation by applied electric fields

    Energy Technology Data Exchange (ETDEWEB)

    Miranda, P C [Institute of Biophysics and Biomedical Engineering, Faculty of Sciences, University of Lisbon, 1749-016 Lisbon (Portugal); Correia, L [Institute of Biophysics and Biomedical Engineering, Faculty of Sciences, University of Lisbon, 1749-016 Lisbon (Portugal); Salvador, R [Institute of Biophysics and Biomedical Engineering, Faculty of Sciences, University of Lisbon, 1749-016 Lisbon (Portugal); Basser, P J [Section on Tissue Biophysics and Biomimetics, NICHD, National Institutes of Health, Bethesda, MD 20892-1428 (United States)

    2007-09-21

    We investigate the heterogeneity of electrical conductivity as a new mechanism to stimulate excitable tissues via applied electric fields. In particular, we show that stimulation of axons crossing internal boundaries can occur at boundaries where the electric conductivity of the volume conductor changes abruptly. The effectiveness of this and other stimulation mechanisms was compared by means of models and computer simulations in the context of transcranial magnetic stimulation. While, for a given stimulation intensity, the largest membrane depolarization occurred where an axon terminates or bends sharply in a high electric field region, a slightly smaller membrane depolarization, still sufficient to generate action potentials, also occurred at an internal boundary where the conductivity jumped from 0.143 S m{sup -1} to 0.333 S m{sup -1}, simulating a white-matter-grey-matter interface. Tissue heterogeneity can also give rise to local electric field gradients that are considerably stronger and more focal than those impressed by the stimulation coil and that can affect the membrane potential, albeit to a lesser extent than the two mechanisms mentioned above. Tissue heterogeneity may play an important role in electric and magnetic 'far-field' stimulation.

  20. Electronic speckle-pattern interferometry (ESPI) applied to the study of mechanical behavior of human jaws

    Science.gov (United States)

    Roman, Juan F.; Moreno de las Cuevas, Vincente; Salgueiro, Jose R.; Suarez, David; Fernandez, Paula; Gallas, Mercedes; Blanchard, Alain

    1996-01-01

    The study of the mechanical behavior of the human jaw during chewing is helpful in several specific medical fields that cover the maxillo-facial area. In this work, electronic speckle pattern interferometry has been applied to study dead jaw bones under external stress which simulates the deformations induced during chewing. Fringes obtained after subtraction of two images of the jaw, the image of the relaxed jaw and that of the jaw under stress, give us information about the most stressed zones. The interferometric analysis proposed here is attractive as it can be done in real time with the jaw under progressive stress. Image processing can be applied for improving the quality of fringes. This research can be of help in orthognathic surgery, for example in diagnosis and treatment of fractured jaws, in oral surgery, and in orthodontics because it would help us to know the stress dispersion when we insert an osseointegrated implant or place an orthodontic appliance, respectively. Studying fragments of human jaw some results about its elasticity and flexibility were obtained.

  1. Maximum-power-point tracking with reduced mechanical stress applied to wind-energy-conversion-systems

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, L.G. [Departamento de Electronica y Comunicaciones, Universidad de los Andes, nucleo la Hechicera, 5101 Merida (Venezuela); Figueres, E.; Garcera, G. [Grupo de Sistemas Electronicos Industriales, Universidad Politecnica de Valencia, Camino de vera s/n, 46022 Valencia (Spain); Carranza, O. [Escuela Superior de Computo, Instituto Politecnico Nacional, Av. Juan de Dios Batiz s/n, 07738 DF (Mexico)

    2010-07-15

    This paper presents an improved maximum-power-point tracking algorithm for wind-energy-conversion-systems. The proposed method significantly reduces the turbine mechanical stress with regard to conventional techniques, so that both the maintenance needs and the medium time between failures are expected to be improved. To achieve these objectives, a sensorless speed control loop receives its reference signal from a modified Perturb and Observe algorithm, in which the typical steps on the reference speed have been substituted by a fixed and well-defined slope ramp signal. As a result, it is achieved a soft dynamic response of both the torque and the speed of the wind turbine, so that the whole system suffers from a lower mechanical stress than with conventional P and O techniques. The proposed method has been applied to a wind turbine based on a permanent magnet synchronous generator operating at variable speed, which is connected to the distribution grid by means of a back to back converter. (author)

  2. Current research activities: Applied and numerical mathematics, fluid mechanics, experiments in transition and turbulence and aerodynamics, and computer science

    Science.gov (United States)

    1992-01-01

    Research conducted at the Institute for Computer Applications in Science and Engineering in applied mathematics, numerical analysis, fluid mechanics including fluid dynamics, acoustics, and combustion, aerodynamics, and computer science during the period 1 Apr. 1992 - 30 Sep. 1992 is summarized.

  3. LEVEL SET METHOD FOR TOPOLOGICAL OPTIMIZATION APPLYING TO STRUCTURE,MECHANISM AND MATERIAL DESIGNS

    Institute of Scientific and Technical Information of China (English)

    Mei Yulin; Wang Xiaoming

    2004-01-01

    Based on a level set model,a topology optimization method has been suggested recently.It uses a level set to express the moving structural boundary,which can flexibly handle complex topological changes.By combining vector level set models with gradient projection technology,the level set method for topological optimization is extended to a topological optimization problem with multi-constraints,multi-materials and multi-load cases.Meanwhile,an appropriate nonlinear speed mapping is established in the tangential space of the active constraints for a fast convergence.Then the method is applied to structure designs,mechanism and material designs by a number of benchmark examples.Finally,in order to further improve computational efficiency and overcome the difficulty that the level set method cannot generate new material interfaces during the optimization process,the topological derivative analysis is incorporated into the level set method for topological optimization,and a topological derivative and level set algorithm for topological optimization is proposed.

  4. The mechanics of motorised momentum exchange tethers when applied to active debris removal from LEO

    Science.gov (United States)

    Caldecott, Ralph; Kamarulzaman, Dayangku N. S.; Kirrane, James P.; Cartmell, Matthew P.; Ganilova, Olga A.

    2014-12-01

    The concept of momentum exchange when applied to space tethers for propulsion is well established, and a considerable body of literature now exists on the on-orbit modelling, the dynamics, and also the control of a large range of tether system applications. The authors consider here a new application for the Motorised Momentum Exchange Tether by highlighting three key stages of development leading to a conceptualisation that can subsequently be developed into a technology for Active Debris Removal. The paper starts with a study of the on-orbit mechanics of a full sized motorised tether in which it is shown that a laden and therefore highly massasymmetrical tether can still be forced to spin, and certainly to librate, thereby confirming its possible usefulness for active debris removal (ADR). The second part of the paper concentrates on the modelling of the centripetal deployment of a symmetrical MMET in order to get it initialized for debris removal operations, and the third and final part of the paper provides an entry into scale modelling for low cost mission design and testing. It is shown that the motorised momentum exchange tether offers a potential solution to the removal of large pieces of orbital debris, and that dynamic methodologies can be implemented to in order to optimise the emergent design.

  5. A Fresh Look at Potential Mechanisms of Change in Applied Relaxation for Generalized Anxiety Disorder: A Case Series

    Science.gov (United States)

    Hayes-Skelton, Sarah A.; Usmani, Aisha; Lee, Jonathan K.; Roemer, Lizabeth; Orsillo, Susan M.

    2012-01-01

    Applied relaxation (AR), which involves noticing early signs of anxiety and responding with a relaxation response, is an empirically supported treatment for generalized anxiety disorder (GAD). However, research on hypothesized mechanisms of AR (e.g., reduced muscle tension) has been mixed, making it likely that additional mechanisms are…

  6. Hormonal and neuromuscular responses to mechanical vibration applied to upper extremity muscles.

    Directory of Open Access Journals (Sweden)

    Riccardo Di Giminiani

    Full Text Available OBJECTIVE: To investigate the acute residual hormonal and neuromuscular responses exhibited following a single session of mechanical vibration applied to the upper extremities among different acceleration loads. METHODS: Thirty male students were randomly assigned to a high vibration group (HVG, a low vibration group (LVG, or a control group (CG. A randomized double-blind, controlled-parallel study design was employed. The measurements and interventions were performed at the Laboratory of Biomechanics of the University of L'Aquila. The HVG and LVG participants were exposed to a series of 20 trials ×10 s of synchronous whole-body vibration (WBV with a 10-s pause between each trial and a 4-min pause after the first 10 trials. The CG participants assumed an isometric push-up position without WBV. The outcome measures were growth hormone (GH, testosterone, maximal voluntary isometric contraction during bench-press, maximal voluntary isometric contraction during handgrip, and electromyography root-mean-square (EMGrms muscle activity (pectoralis major [PM], triceps brachii [TB], anterior deltoid [DE], and flexor carpi radialis [FCR]. RESULTS: The GH increased significantly over time only in the HVG (P = 0.003. Additionally, the testosterone levels changed significantly over time in the LVG (P = 0.011 and the HVG (P = 0.001. MVC during bench press decreased significantly in the LVG (P = 0.001 and the HVG (P = 0.002. In the HVG, the EMGrms decreased significantly in the TB (P = 0.006 muscle. In the LVG, the EMGrms decreased significantly in the DE (P = 0.009 and FCR (P = 0.006 muscles. CONCLUSION: Synchronous WBV acutely increased GH and testosterone serum concentrations and decreased the MVC and their respective maximal EMGrms activities, which indicated a possible central fatigue effect. Interestingly, only the GH response was dependent on the acceleration with respect to the subjects' responsiveness.

  7. Composite Overwrap Pressure Vessels: Mechanics and Stress Rupture Lifing Philosophy

    Science.gov (United States)

    Thesken, John C.; Murthy, Pappu L. N.; Phoenix, Leigh

    2007-01-01

    The NASA Engineering and Safety Center (NESC) has been conducting an independent technical assessment to address safety concerns related to the known stress rupture failure mode of filament wound pressure vessels in use on Shuttle and the International Space Station. The Shuttle's Kevlar-49 fiber overwrapped tanks are of particular concern due to their long usage and the poorly understood stress rupture process in Kevlar-49 filaments. Existing long term data show that the rupture process is a function of stress, temperature and time. However due to the presence of load sharing liners and the complex manufacturing procedures, the state of actual fiber stress in flight hardware and test articles is not clearly known. Indeed non-conservative life predictions have been made where stress rupture data and lifing procedures have ignored the contribution of the liner in favor of applied pressure as the controlling load parameter. With the aid of analytical and finite element results, this paper examines the fundamental mechanical response of composite overwrapped pressure vessels including the influence of elastic-plastic liners and degraded/creeping overwrap properties. Graphical methods are presented describing the non-linear relationship of applied pressure to Kevlar-49 fiber stress/strain during manufacturing, operations and burst loadings. These are applied to experimental measurements made on a variety of vessel systems to demonstrate the correct calibration of fiber stress as a function of pressure. Applying this analysis to the actual qualification burst data for Shuttle flight hardware revealed that the nominal fiber stress at burst was in some cases 23% lower than what had previously been used to predict stress rupture life. These results motivate a detailed discussion of the appropriate stress rupture lifing philosophy for COPVs including the correct transference of stress rupture life data between dissimilar vessels and test articles.

  8. Composite Overwrap Pressure Vessels: Mechanics and Stress Rupture Lifting Philosophy

    Science.gov (United States)

    Thesken, John C.; Murthy, Pappu L. N.; Phoenix, S. L.

    2009-01-01

    The NASA Engineering and Safety Center (NESC) has been conducting an independent technical assessment to address safety concerns related to the known stress rupture failure mode of filament wound pressure vessels in use on Shuttle and the International Space Station. The Shuttle s Kevlar-49 (DuPont) fiber overwrapped tanks are of particular concern due to their long usage and the poorly understood stress rupture process in Kevlar-49 filaments. Existing long term data show that the rupture process is a function of stress, temperature and time. However due to the presence of load sharing liners and the complex manufacturing procedures, the state of actual fiber stress in flight hardware and test articles is not clearly known. Indeed nonconservative life predictions have been made where stress rupture data and lifing procedures have ignored the contribution of the liner in favor of applied pressure as the controlling load parameter. With the aid of analytical and finite element results, this paper examines the fundamental mechanical response of composite overwrapped pressure vessels including the influence of elastic plastic liners and degraded/creeping overwrap properties. Graphical methods are presented describing the non-linear relationship of applied pressure to Kevlar-49 fiber stress/strain during manufacturing, operations and burst loadings. These are applied to experimental measurements made on a variety of vessel systems to demonstrate the correct calibration of fiber stress as a function of pressure. Applying this analysis to the actual qualification burst data for Shuttle flight hardware revealed that the nominal fiber stress at burst was in some cases 23 percent lower than what had previously been used to predict stress rupture life. These results motivate a detailed discussion of the appropriate stress rupture lifing philosophy for COPVs including the correct transference of stress rupture life data between dissimilar vessels and test articles.

  9. A screw-based dynamic balancing approach, applied to a 5-bar mechanism

    NARCIS (Netherlands)

    de Jong, Jan Johannes; van Dijk, Johannes; Herder, Justus Laurens

    2016-01-01

    Dynamic balancing aims to reduce or eliminate the shaking base reaction forces and moments of mechanisms, in order to minimize vibration and wear. The derivation of the dynamic balance conditions requires significant algebraic effort, even for simple mechanisms. In this study, a screw-based balancin

  10. Applied origami. Using origami design principles to fold reprogrammable mechanical metamaterials.

    Science.gov (United States)

    Silverberg, Jesse L; Evans, Arthur A; McLeod, Lauren; Hayward, Ryan C; Hull, Thomas; Santangelo, Christian D; Cohen, Itai

    2014-08-08

    Although broadly admired for its aesthetic qualities, the art of origami is now being recognized also as a framework for mechanical metamaterial design. Working with the Miura-ori tessellation, we find that each unit cell of this crease pattern is mechanically bistable, and by switching between states, the compressive modulus of the overall structure can be rationally and reversibly tuned. By virtue of their interactions, these mechanically stable lattice defects also lead to emergent crystallographic structures such as vacancies, dislocations, and grain boundaries. Each of these structures comes from an arrangement of reversible folds, highlighting a connection between mechanical metamaterials and programmable matter. Given origami's scale-free geometric character, this framework for metamaterial design can be directly transferred to milli-, micro-, and nanometer-size systems.

  11. Process-based Architecture for Robustness Applying Linux isolation mechanism in MG-R

    NARCIS (Netherlands)

    Matsinger, A.A.J.; Kourzanov, P.; Gopakumar, G.N.

    2006-01-01

    This report contains the results of a feasibility study of applyingLinux facilities for isolating and protecting processes, and for communication and synchronisation between processes, to the MG-R architecture so as to improve the robustness. Moreover some guidelines andtrade-offs are discussed how

  12. Playful Mobility Choices: Motivating informed mobility decision making by applying game mechanics

    Directory of Open Access Journals (Sweden)

    A. Millonig

    2014-10-01

    Full Text Available Motivating people to change their mobility behaviour patterns towards more sustainable forms of mobility is one of the major challenges regarding climate change and quality of life. Recently, an increasing amount of attempts to use gamification for triggering such behavioural changes can be observed. However, little is known about the actual impact of using game elements. This contribution describes a concept for systematically analysing the group-specific effects of different game mechanics on mobility decision processes (e.g. mode and route choice. Based on theoretical findings concerning player types and mobility styles we developed a framework for identifying effective game mechanics motivating users to explore mobility alternatives and take more informed and more sustainable mode or route choice decisions. The results will form the basis for implementing game mechanics in mobility information services motivating users to explore unfamiliar but more sustainable mobility options.

  13. Parameters of the Menzerath-Altmann law: Statistical mechanical interpretation as applied to a linguistic organization

    CERN Document Server

    Eroglu, Sertac

    2013-01-01

    The distribution behavior dictated by the Menzerath-Altmann (MA) law is frequently encountered in linguistic and natural organizations at various structural levels. The mathematical form of this empirical law comprises three fitting parameters whose values tend to be elusive, especially in inter-organizational studies. To allow interpretation of these parameters and better understand such distribution behavior, we present a statistical mechanical approach based on an analogy between the classical particles of a statistical mechanical organization and the number of distinct words in a textual organization. With this derivation, we achieve a transformed (generalized) form of the MA model, termed the statistical mechanical Menzerath-Altmann (SMMA) model. This novel transformed model consists of four parameters, one of which is a structure-dependent input parameter, and three of which are free-fitting parameters. Using distinct word data sets from two text corpora, we verified that the SMMA model describes the sa...

  14. Menzerath-Altmann Law: Statistical Mechanical Interpretation as Applied to a Linguistic Organization

    Science.gov (United States)

    Eroglu, Sertac

    2014-10-01

    The distribution behavior described by the empirical Menzerath-Altmann law is frequently encountered during the self-organization of linguistic and non-linguistic natural organizations at various structural levels. This study presents a statistical mechanical derivation of the law based on the analogy between the classical particles of a statistical mechanical organization and the distinct words of a textual organization. The derived model, a transformed (generalized) form of the Menzerath-Altmann model, was termed as the statistical mechanical Menzerath-Altmann model. The derived model allows interpreting the model parameters in terms of physical concepts. We also propose that many organizations presenting the Menzerath-Altmann law behavior, whether linguistic or not, can be methodically examined by the transformed distribution model through the properly defined structure-dependent parameter and the energy associated states.

  15. Cable dynamics applied to long-length scale mechanics of DNA

    OpenAIRE

    Goyal, Sachin; Lillian, Todd; Noel C Perkins; Meyhofer, Edgar

    2007-01-01

    This paper introduces the use of cable dynamics models as a means to explore the mechanics of DNA on long-length scales. It is on these length scales that DNA forms twisted and curved three-dimensional shapes known as supercoils and loops. These long-length scale DNA structures have a pronounced influence on the functions of this molecule within the cell including the packing of DNA in the cell nucleus, transcription, replication and gene repair. We provide a short background to the mechanics...

  16. Development of a Procedure to Apply Detailed Chemical Kinetic Mechanisms to CFD Simulations as Post Processing

    DEFF Research Database (Denmark)

    Skjøth-Rasmussen, Martin Skov; Glarborg, Peter; Jensen, Anker

    2003-01-01

    mechanism. It involves post-processing of data extracted from computational fluid dynamics simulations. Application of this approach successfully describes combustion chemistry in a standard swirl burner, the so-called Harwell furnace. Nevertheless, it needs validation against more complex combustion models......It is desired to make detailed chemical kinetic mechanisms applicable to the complex geometries of practical combustion devices simulated with computational fluid dynamics tools. This work presents a novel general approach to combining computational fluid dynamics and a detailed chemical kinetic...

  17. PROJECTION TRANSFORMATION METHODS APPLIED TO THE REPRESENTATION OF MECHANICAL PARTS. COMPARATIVE GRAPHICAL AND ANALYTICAL STUDY

    Directory of Open Access Journals (Sweden)

    ORBAN Magdalena

    2015-06-01

    Full Text Available The paper presents a comparative graphical and analytical study concerning the possibility of applying methods of transforming the projection – rotation and change of projection planes - for determination of spatial image of some machine parts whose edges or plane faces form imposed angles with the projection planes. An analysis of the existing relation between the two methods respectively with the axonometric representation realized by the coordinate’s method is also performed, highlighting the advantages presented by each of the considered methods. In both cases, the double rotation, respectively the double change of projection planes will be applied, equivalent to an intuitive axonometric representation which will meet, at the same time, some concrete requirements of a project.

  18. Study on Mechanism of Concrete Failure Induced by Steel Corrosion under Externally Applied Direct Current

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    With the combination of electrochemical corrosion due to straycurrent in running tunnels of metro, the formula to determine the corrosion products of rebars in reinforced concrete subjected to externally applied direct current is proposed, and the influence of corrosion on stress in concrete is also discussed. Meanwhile, the concept of corrosion stress field and its mathematical formula are presented in the paper. Finally the failure mode of concrete and its shortest breaking time are also analyzed.

  19. FEATURES OF APPLYING CHINESE CHANG-STYLE TAICHI EXERCISES-EXPLORING MECHANISM OF ACUPUNCTURE

    Institute of Scientific and Technical Information of China (English)

    CHEN Si Min

    2002-01-01

    @@ Traditional Chinese medicine is extensive and profound with the theory of meridians as its main component part which is also the principle of acupuncture. I wish to introduce the application of the theory of meridian and its integration into Taichi, exploring the mechanism of acupuncture by Qi operation.

  20. A BEM formulation applied in the mechanical material modelling of viscoelastic cracked structures

    Science.gov (United States)

    Oliveira, Hugo Luiz; Leonel, Edson Denner

    2016-12-01

    The present study aims at performing a mechanical analysis of 2D viscoelastic cracked structural materials using the Boundary Element Method (BEM). The mesh dimensionality reduction provided by the BEM and its accuracy in representing high gradient fields make this numerical method robust to solve fracture mechanics problems. Viscoelastic models address phenomena that provide changes on the mechanical material properties along time. Well-established viscoelastic models such as Maxwell, Kelvin-Voigt and Boltzmann are used in this study. The numerical viscoelastic scheme, which is based on algebraic BEM equations, utilizes the Euler method for time derivative evaluation. Therefore, the unknown variables at the structural boundary and its variations along time are determined through an ordinary linear system of equations. Moreover, time-dependent boundary conditions may be considered, which represent loading phases. The dual BEM formulation is adopted for modelling the mechanical structural behaviour of cracks bodies. Three examples are considered to illustrate the robustness of the adopted formulation. The results achieved by the BEM are in good agreement with reported data and numerical stability is observed.

  1. Thermo-mechanical concepts applied to modeling liquid propellant rocket engine stability

    Science.gov (United States)

    Kassoy, David R.; Norris, Adam

    2016-11-01

    The response of a gas to transient, spatially distributed energy addition can be quantified mathematically using thermo-mechanical concepts available in the literature. The modeling demonstrates that the ratio of the energy addition time scale to the acoustic time scale of the affected volume, and the quantity of energy added to that volume during the former determine the whether the responses to heating can be described as occurring at nearly constant volume, fully compressible or nearly constant pressure. Each of these categories is characterized by significantly different mechanical responses. Application to idealized configurations of liquid propellant rocket engines provides an opportunity to identify physical conditions compatible with gasdynamic disturbances that are sources of engine instability. Air Force Office of Scientific Research.

  2. Playful Mobility Choices: Motivating informed mobility decision making by applying game mechanics

    OpenAIRE

    2014-01-01

    Motivating people to change their mobility behaviour patterns towards more sustainable forms of mobility is one of the major challenges regarding climate change and quality of life. Recently, an increasing amount of attempts to use gamification for triggering such behavioural changes can be observed. However, little is known about the actual impact of using game elements. This contribution describes a concept for systematically analysing the group-specific effects of different game mechanics ...

  3. High Resolution Data Assimilation of Cardiac Mechanics Applied to a Dyssynchronous Ventricle.

    Science.gov (United States)

    Balaban, Gabriel; Finsberg, Henrik; Odland, Hans Henrik; Rognes, Marie; Ross, Stian; Sundnes, Joakim; Wall, Samuel

    2016-12-31

    Computational models of cardiac mechanics, personalized to a patient, offer access to mechanical information above and beyond direct medical imaging. Additionally, such models can be used to optimize and plan therapies in-silico, thereby reducing risks and improving patient outcome. Model personalization has traditionally been achieved by data assimilation, which is the tuning or optimization of model parameters to match patient observations. Current data assimilation procedures for cardiac mechanics are limited in their ability to efficiently handle high dimensional parameters. This restricts parameter spatial resolution, and thereby the ability of a personalized model to account for heterogeneities that are often present in a diseased or injured heart. In this paper we address this limitation by proposing an adjoint-gradient based data assimilation method that can efficiently handle high-dimensional parameters. We test this procedure on a synthetic data set, and provide a clinical example with a dyssynchronous left ventricle with highly irregular motion. Our results show that the method efficiently handles a high dimensional optimization parameter, and produces an excellent agreement for personalized models to both synthetic and clinical data. This article is protected by copyright. All rights reserved.

  4. Thermomechanical loading applied on the cladding tube during the pellet cladding mechanical interaction phase of a rapid reactivity initiated accident

    Science.gov (United States)

    Hellouin de Menibus, Arthur; Sercombe, Jerome; Auzoux, Quentin; Poussard, Christophe

    2014-10-01

    Calculations of the CABRI REP-Na5 pulse were performed with the ALCYONE code in order to determine the evolution of the thermomechanical loading applied on the cladding tube during the Pellet-Cladding Mechanical Interaction (PCMI) phase of a rapid Reactivity Initiated Accident (RIA) initiated at 280 °C that lasted 8.8 ms. The evolution of the following parameters are reported: the cladding temperature, heating rate, strain rate and loading biaxiality. The impact of these parameters on the cladding mechanical behavior and fracture are then briefly reviewed.

  5. Virtual Metrology applied in Run-to-Run Control for a Chemical Mechanical Planarization process

    Science.gov (United States)

    Jebri, M. A.; El Adel, E. M.; Graton, G.; Ouladsine, M.; Pinaton, J.

    2017-01-01

    This paper deals with missing data in semiconductor manufacturing derived from a measurement sampling strategies. The idea is to construct a virtual metrology module to estimate non measured variables using a new modified Just-In-Time Learning approach (JITL). The aim of this paper is to integrate estimated data into product control loop. In collaboration with our industrial partner STMicroelectronics Rousset, the accuracy of the proposed method is illustrated by using industrial data-sets derived from Chemical Mechanical Planarization (CMP) process that enables us to compare results obtained with the classical and the modified version of JITL approach. Then, the contribution of the estimated data is shown in product quality improvement.

  6. Thermomechanical loading applied on the cladding tube during the pellet cladding mechanical interaction phase of a rapid reactivity initiated accident

    OpenAIRE

    2014-01-01

    International audience; Calculations of the CABRI REP-Na5 pulse were performed with the ALCYONE code in order to determine the evolution of the thermomechanical loading applied on the cladding tube during the Pellet-Cladding Mechanical Interaction (PCMI) phase of a rapid Reactivity Initiated Accident (RIA) initiated at 280 °C that lasted 8.8 ms. The evolution of the following parameters are reported: the cladding temperature, heating rate, strain rate and loading biaxiality. The impact of the...

  7. First-principles study of elastic mechanical responses to applied deformation of metal-organic frameworks

    Science.gov (United States)

    Banlusan, Kiettipong; Strachan, Alejandro

    2017-05-01

    We use density functional theory to compute the elastic constant tensors of two families of metal-organic frameworks (MOFs) to establish relationships between their structures and mechanical properties. The Zn family consist of Zn4O centers each coordinated by six organic linkers along the ⟨100⟩ directions; we studied three linkers of increasing lengths: 1,4-benzenedicarboxylate (BDC), 4,4'-biphenyl-dicarboxylate (BPDC), and 4,4''-terphenyl-dicarboxylate. This relatively weak connectivity leads to high anisotropy; in fact, Zn-MOFs exhibit extremely low shear modulus and are near a mechanical instability. In contrast, Zr family studied consists of Zr6O4(OH)4 centers each linked by fumarate, BDC, and BPDC ligands along the twelve ⟨110⟩ directions. The higher structural connectivity results in stiffer frameworks with lower anisotropy. The smallest Zr-MOF exhibits nearly isotropic elasticity with a Zener ratio of 1.06. The stiffest and most compliant directions of both families are directly related to the orientation of the organic linkers. Temperature has a significant effect on elastic moduli; for example, we observed reduction of average Young's modulus and shear modulus by about 30% from 0 K to 300 K in Zn-BPDC even when it exhibits large negative thermal expansion. We find the effect of temperature to be directionally dependent, leading to an increase in anisotropy upon increasing temperature. The predicted effects of temperature and anisotropy help reconcile a longstanding discrepancy between experiments and first principles calculations.

  8. Doppler optical coherence microscopy and tomography applied to inner ear mechanics

    Energy Technology Data Exchange (ETDEWEB)

    Page, Scott; Freeman, Dennis M. [Research Laboratory of Electronics, Massachusetts Institute of Technology, Cambridge, Massachusetts (United States); Department of Electrical Engineering and Computer Science, Massachusetts Institute of Technology, Cambridge, Massachusetts (United States); Ghaffari, Roozbeh [Research Laboratory of Electronics, Massachusetts Institute of Technology, Cambridge, Massachusetts (United States)

    2015-12-31

    While it is clear that cochlear traveling waves underlie the extraordinary sensitivity, frequency selectivity, and dynamic range of mammalian hearing, the underlying micromechanical mechanisms remain unresolved. Recent advances in low coherence measurement techniques show promise over traditional laser Doppler vibrometry and video microscopy, which are limited by low reflectivities of cochlear structures and restricted optical access. Doppler optical coherence tomography (DOCT) and Doppler optical coherence microscopy (DOCM) both utilize a broadband source to limit constructive interference of scattered light to a small axial depth called a coherence gate. The coherence gate can be swept axially to image and measure sub-nanometer motions of cochlear structures throughout the cochlear partition. The coherence gate of DOCT is generally narrower than the confocal gate of the focusing optics, enabling increased axial resolution (typically 15 μm) within optical sections of the cochlear partition. DOCM, frequently implemented in the time domain, centers the coherence gate on the focal plane, achieving enhanced lateral and axial resolution when the confocal gate is narrower than the coherence gate. We compare these two complementary systems and demonstrate their utility in studying cellular and micromechanical mechanisms involved in mammalian hearing.

  9. An investigation of cam-roller mechanism applied in sphere cam engine

    Institute of Scientific and Technical Information of China (English)

    张雷; 潘存云; 徐小军; 徐海军; 张正洲

    2016-01-01

    As an alternative power source for hybrid electrical vehicle(HEV), electric generating system(EGS) driven by sphere cam engine(SCE) is said to own higher power density and integration. In this work, the structure and working principle of EGS were introduced, based on which the advantages of EGS were displayed. The profile of sphere cam was achieved after the desired motion of piston was given. After establishing the dynamic model of power transmission mechanism, the characteristics of cam-roller mechanism were studied. The results show that the optimal cam profile of SCE is a sinusoid curve which has two peaks and two valleys and a mean pressure angle of 47.19°. Because of the special cam shape, the trace of end surface center of piston is an eight-shape curve on a specific sphere surface. SCE running at speed of 3000 r/min can generate the power of 33.81 kW, which could satisfy the need of HEVs. However, the force between cylinder and piston skirt caused by Coriolis acceleration can reach up to 1182 N, which leads to serious wear between cylinder liner and piston skirt and may shorten the lifespan of SCE.

  10. Statistical Mechanics Ideas and Techniques Applied to Selected Problems in Ecology

    Directory of Open Access Journals (Sweden)

    Hugo Fort

    2013-11-01

    Full Text Available Ecosystem dynamics provides an interesting arena for the application of a plethora concepts and techniques from statistical mechanics. Here I review three examples corresponding each one to an important problem in ecology. First, I start with an analytical derivation of clumpy patterns for species relative abundances (SRA empirically observed in several ecological communities involving a high number n of species, a phenomenon which have puzzled ecologists for decades. An interesting point is that this derivation uses results obtained from a statistical mechanics model for ferromagnets. Second, going beyond the mean field approximation, I study the spatial version of a popular ecological model involving just one species representing vegetation. The goal is to address the phenomena of catastrophic shifts—gradual cumulative variations in some control parameter that suddenly lead to an abrupt change in the system—illustrating it by means of the process of desertification of arid lands. The focus is on the aggregation processes and the effects of diffusion that combined lead to the formation of non trivial spatial vegetation patterns. It is shown that different quantities—like the variance, the two-point correlation function and the patchiness—may serve as early warnings for the desertification of arid lands. Remarkably, in the onset of a desertification transition the distribution of vegetation patches exhibits scale invariance typical of many physical systems in the vicinity a phase transition. I comment on similarities of and differences between these catastrophic shifts and paradigmatic thermodynamic phase transitions like the liquid-vapor change of state for a fluid. Third, I analyze the case of many species interacting in space. I choose tropical forests, which are mega-diverse ecosystems that exhibit remarkable dynamics. Therefore these ecosystems represent a research paradigm both for studies of complex systems dynamics as well as to

  11. Band gap engineering in polymers through chemical doping and applied mechanical strain

    Science.gov (United States)

    Lanzillo, Nicholas A.; Breneman, Curt M.

    2016-08-01

    We report simulations based on density functional theory and many-body perturbation theory exploring the band gaps of common crystalline polymers including polyethylene, polypropylene and polystyrene. Our reported band gaps of 8.6 eV for single-chain polyethylene and 9.1 eV for bulk crystalline polyethylene are in excellent agreement with experiment. The effects of chemical doping along the polymer backbone and side-groups are explored, and the use mechanical strain as a means to modify the band gaps of these polymers over a range of several eV while leaving the dielectric constant unchanged is discussed. This work highlights some of the opportunities available to engineer the electronic properties of polymers with wide-reaching implications for polymeric dielectric materials used for capacitive energy storage.

  12. Fuzzy Optimization of an Elevator Mechanism Applying the Genetic Algorithm and Neural Networks

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Considering the indefinite character of the value of design parameters and being satisfied with load-bearing capacity and stiffness, the fuzzy optimization mathematical model is set up to minimize the volume of tooth corona of a worm gear in an elevator mechanism. The method of second-class comprehensive evaluation was used based on the optimal level cut set, thus the optimal level value of every fuzzy constraint can be attained; the fuzzy optimization is transformed into the usual optimization.The Fast Back Propagation of the neural networks algorithm are adopted to train feed-forward networks so as to fit a relative coefficient. Then the fitness function with penalty terms is built by a penalty strategy, a neural networks program is recalled, and solver functions of the Genetic Algorithm Toolbox of Matlab software are adopted to solve the optimization model.

  13. Remarks on Some Mechanical Small-Scale Tests Applied to Properties of Materials

    Science.gov (United States)

    Cardu, Marilena; Seccatore, Jacopo

    2016-06-01

    The paper presents the results of test campaigns on small-scale strength properties (particularly, micro-hardness) performed on two homogeneous materials: calcite, a very common and widespread mineral that is characterized by its relatively low Mohs hardness and its high reactivity with even weak acids; and glass, an amorphous solid characterized by the absence of the long-range order which defines crystalline materials. After a synthetic description of the principles underlying two of the three classical comminution laws, known as Kick's law and Rittinger's law, experimental results are discussed. The results of the tests performed show that both scale effect and size effect contribute to the non-constancy of mechanical properties at small scale for crystalline materials. On the other hand, for amorphous materials, a theoretical law considering size effects gives considerably different results from empirical measurements. Considerations and an extended discussion address these findings.

  14. Applying the Different Statistical Tests in Analysis of Electrical Breakdown Mechanisms in Nitrogen Filled Gas Diode

    Science.gov (United States)

    Čedomir, A. Maluckov; Saša, A. Rančev; Miodrag, K. Radović

    2016-10-01

    This paper presents the results of our investigations of breakdown mechanisms, as well as a description of their influence on the distributions of time delay distributions, for a gas tube filled with nitrogen at 4 mbar. The values of the time delay are measured for different voltages, and the values of the relaxation times and their distributions and probability plots are analyzed. The obtained density distributions have Gaussian distributions and exponential distributions for different values of relaxation times (Gaussian for small values and exponential for large values of relaxation time). It is shown that for middle values of relaxation time the delay distributions have a shape between Gaussian and exponential distributions, which is a result of the different influences of electrical breakdown.

  15. An introduction to applied quantum mechanics in the Wigner Monte Carlo formalism

    Energy Technology Data Exchange (ETDEWEB)

    Sellier, J.M., E-mail: jeanmichel.sellier@parallel.bas.bg [IICT, Bulgarian Academy of Sciences, Acad. G. Bonchev str. 25A, 1113 Sofia (Bulgaria); Nedjalkov, M. [IICT, Bulgarian Academy of Sciences, Acad. G. Bonchev str. 25A, 1113 Sofia (Bulgaria); Institute for Microelectronics, TU Wien, Gußhausstraße 27-29/E360, 1040 Wien (Austria); Dimov, I. [IICT, Bulgarian Academy of Sciences, Acad. G. Bonchev str. 25A, 1113 Sofia (Bulgaria)

    2015-05-12

    The Wigner formulation of quantum mechanics is a very intuitive approach which allows the comprehension and prediction of quantum mechanical phenomena in terms of quasi-distribution functions. In this review, our aim is to provide a detailed introduction to this theory along with a Monte Carlo method for the simulation of time-dependent quantum systems evolving in a phase-space. This work consists of three main parts. First, we introduce the Wigner formalism, then we discuss in detail the Wigner Monte Carlo method and, finally, we present practical applications. In particular, the Wigner model is first derived from the Schrödinger equation. Then a generalization of the formalism due to Moyal is provided, which allows to recover important mathematical properties of the model. Next, the Wigner equation is further generalized to the case of many-body quantum systems. Finally, a physical interpretation of the negative part of a quasi-distribution function is suggested. In the second part, the Wigner Monte Carlo method, based on the concept of signed (virtual) particles, is introduced in detail for the single-body problem. Two extensions of the Wigner Monte Carlo method to quantum many-body problems are introduced, in the frameworks of time-dependent density functional theory and ab-initio methods. Finally, in the third and last part of this paper, applications to single- and many-body problems are performed in the context of quantum physics and quantum chemistry, specifically focusing on the hydrogen, lithium and boron atoms, the H{sub 2} molecule and a system of two identical Fermions. We conclude this work with a discussion on the still unexplored directions the Wigner Monte Carlo method could take in the next future.

  16. Mechanical morphogenesis: a concept applied to the surface of the radius.

    Science.gov (United States)

    Galtés, Ignasi; Rodríguez-Baeza, Alfonso; Malgosa, Assumpció

    2006-07-01

    The purpose of this study is to perform a detailed morphological analysis of the changes that occur at the attachment sites of muscles, tendons, and ligaments on the radius. We consider the osteological, anatomical, and pathological aspects in detail, devising a visual standard for ranking the development of osseous expression at each attachment. We also discuss the etiology, particularly through focus on the relationship with the activity and age variables. In a sample of 148 radii from archeological and contemporary samples, 11 osteological sites were analyzed in each specimen. The osteological sites included nine muscular attachments, the attachment of the interosseous membrane, and the groove of the extensor pollicis longus tendon. The results show that mechanical loading is the main cause of different types of markings appearing and developing on the bone surface. Furthermore, there is a relationship between the osteological appearance of enthesis and its morphological type. It is possible to grade osteological appearance with a visual reference method that establishes an identifiable threshold for each grade and eliminates relying completely on observer experience. This methodology is applicable to the field of physical anthropology and to its forensic subfield, identifying individuals by attributing to them specific work or given activities through the use of skeletal remains.

  17. An Implementation Mechanisms of SVM Control Strategies Applied to Five Levels Cascaded Multi-Level Inverters

    Directory of Open Access Journals (Sweden)

    Mohammed Yaichi

    2014-03-01

    Full Text Available In the area of the energy control with high voltage and power, the multilevel inverters constitute a relatively recent research orientation. The current applications of this technology are in the domains of the high voltage (over hundred kV, variable speed drives, transport and distribution of a good quality of electrical energy (HVDC, FACTS system, ..... To improve the output voltage for such inverters, many different modulation strategies have been developed. Among these strategies, the SVM (Space Vector Modulation. The technique provide the nearest switching vectors sequence to the reference vector without involving trigonometric functions and provide the additional advantages of superior harmonic quality. In this paper, we analyze different mechanisms of the output voltage synthesis and the problem of even order harmonic production. With the proposed a new trajectory SVM, which can eliminate all the even order harmonics for five levels inverter. Show clearly how to deduce the trajectories from the sequences allowing to have better performances among several possible trajectories. It is dedicated to the application of two particular trajectories.

  18. A fast platform for simulating semi-flexible fiber suspensions applied to cell mechanics

    Science.gov (United States)

    Nazockdast, Ehssan; Rahimian, Abtin; Zorin, Denis; Shelley, Michael

    2017-01-01

    We present a novel platform for the large-scale simulation of three-dimensional fibrous structures immersed in a Stokesian fluid and evolving under confinement or in free-space in three dimensions. One of the main motivations for this work is to study the dynamics of fiber assemblies within biological cells. For this, we also incorporate the key biophysical elements that determine the dynamics of these assemblies, which include the polymerization and depolymerization kinetics of fibers, their interactions with molecular motors and other objects, their flexibility, and hydrodynamic coupling. This work, to our knowledge, is the first technique to include many-body hydrodynamic interactions (HIs), and the resulting fluid flows, in cellular assemblies of flexible fibers. We use non-local slender body theory to compute the fluid-structure interactions of the fibers and a second-kind boundary integral formulation for other rigid bodies and the confining boundary. A kernel-independent implementation of the fast multipole method is utilized for efficient evaluation of HIs. The deformation of the fibers is described by nonlinear Euler-Bernoulli beam theory and their polymerization is modeled by the reparametrization of the dynamic equations in the appropriate non-Lagrangian frame. We use a pseudo-spectral representation of fiber positions and implicit time-stepping to resolve large fiber deformations, and to allow time-steps not excessively constrained by temporal stiffness or fiber-fiber interactions. The entire computational scheme is parallelized, which enables simulating assemblies of thousands of fibers. We use our method to investigate two important questions in the mechanics of cell division: (i) the effect of confinement on the hydrodynamic mobility of microtubule asters; and (ii) the dynamics of the positioning of mitotic spindle in complex cell geometries. Finally to demonstrate the general applicability of the method, we simulate the sedimentation of a cloud of

  19. A fast platform for simulating semi-flexible fiber suspensions applied to cell mechanics

    Energy Technology Data Exchange (ETDEWEB)

    Nazockdast, Ehssan, E-mail: ehssan@cims.nyu.edu [Courant Institute of Mathematical Sciences, New York University, New York, NY 10012 (United States); Center for Computational Biology, Simons Foundation, New York, NY 10010 (United States); Rahimian, Abtin, E-mail: arahimian@acm.org [Courant Institute of Mathematical Sciences, New York University, New York, NY 10012 (United States); Zorin, Denis, E-mail: dzorin@cs.nyu.edu [Courant Institute of Mathematical Sciences, New York University, New York, NY 10012 (United States); Shelley, Michael, E-mail: shelley@cims.nyu.edu [Courant Institute of Mathematical Sciences, New York University, New York, NY 10012 (United States); Center for Computational Biology, Simons Foundation, New York, NY 10010 (United States)

    2017-01-15

    We present a novel platform for the large-scale simulation of three-dimensional fibrous structures immersed in a Stokesian fluid and evolving under confinement or in free-space in three dimensions. One of the main motivations for this work is to study the dynamics of fiber assemblies within biological cells. For this, we also incorporate the key biophysical elements that determine the dynamics of these assemblies, which include the polymerization and depolymerization kinetics of fibers, their interactions with molecular motors and other objects, their flexibility, and hydrodynamic coupling. This work, to our knowledge, is the first technique to include many-body hydrodynamic interactions (HIs), and the resulting fluid flows, in cellular assemblies of flexible fibers. We use non-local slender body theory to compute the fluid–structure interactions of the fibers and a second-kind boundary integral formulation for other rigid bodies and the confining boundary. A kernel-independent implementation of the fast multipole method is utilized for efficient evaluation of HIs. The deformation of the fibers is described by nonlinear Euler–Bernoulli beam theory and their polymerization is modeled by the reparametrization of the dynamic equations in the appropriate non-Lagrangian frame. We use a pseudo-spectral representation of fiber positions and implicit time-stepping to resolve large fiber deformations, and to allow time-steps not excessively constrained by temporal stiffness or fiber–fiber interactions. The entire computational scheme is parallelized, which enables simulating assemblies of thousands of fibers. We use our method to investigate two important questions in the mechanics of cell division: (i) the effect of confinement on the hydrodynamic mobility of microtubule asters; and (ii) the dynamics of the positioning of mitotic spindle in complex cell geometries. Finally to demonstrate the general applicability of the method, we simulate the sedimentation of a

  20. Mindfulness training applied to addiction therapy: insights into the neural mechanisms of positive behavioral change

    Directory of Open Access Journals (Sweden)

    Garl

    2016-07-01

    Full Text Available Eric L Garland,1,2 Matthew O Howard,3 Sarah E Priddy,1 Patrick A McConnell,4 Michael R Riquino,1 Brett Froeliger4 1College of Social Work, 2Hunstsman Cancer Institute, University of Utah, Salt Lake City, UT, USA; 3School of Social Work, University of North Carolina at Chapel Hill, Chapel Hill, NC, USA; 4Department of Neuroscience, Medical University of South Carolina, Charleston, SC, USA Abstract: Dual-process models from neuroscience suggest that addiction is driven by dysregulated interactions between bottom-up neural processes underpinning reward learning and top-down neural functions subserving executive function. Over time, drug use causes atrophy in prefrontally mediated cognitive control networks and hijacks striatal circuits devoted to processing natural rewards in service of compulsive seeking of drug-related reward. In essence, mindfulness-based interventions (MBIs can be conceptualized as mental training programs for exercising, strengthening, and remediating these functional brain networks. This review describes how MBIs may remediate addiction by regulating frontostriatal circuits, thereby restoring an adaptive balance between these top-down and bottom-up processes. Empirical evidence is presented suggesting that MBIs facilitate cognitive control over drug-related automaticity, attentional bias, and drug cue reactivity, while enhancing responsiveness to natural rewards. Findings from the literature are incorporated into an integrative account of the neural mechanisms of mindfulness-based therapies for effecting positive behavior change in the context of addiction recovery. Implications of our theoretical framework are presented with respect to how these insights can inform the addiction therapy process. Keywords: mindfulness, frontostriatal, savoring, cue reactivity, hedonic dysregulation, reward, addiction

  1. A polypeptide-DNA hybrid with selective linking capability applied to single molecule nano-mechanical measurements using optical tweezers.

    Science.gov (United States)

    Moayed, Fatemeh; Mashaghi, Alireza; Tans, Sander J

    2013-01-01

    Many applications in biosensing, biomaterial engineering and single molecule biophysics require multiple non-covalent linkages between DNA, protein molecules, and surfaces that are specific yet strong. Here, we present a novel method to join proteins and dsDNA molecule at their ends, in an efficient, rapid and specific manner, based on the recently developed linkage between the protein StrepTactin (STN) and the peptide StrepTag II (ST). We introduce a two-step approach, in which we first construct a hybrid between DNA and a tandem of two STs peptides (tST). In a second step, this hybrid is linked to polystyrene bead surfaces and Maltose Binding Protein (MBP) using STN. Furthermore, we show the STN-tST linkage is more stable against forces applied by optical tweezers than the commonly used biotin-Streptavidin (STV) linkage. It can be used in conjunction with Neutravidin (NTV)-biotin linkages to form DNA tethers that can sustain applied forces above 65 pN for tens of minutes in a quarter of the cases. The method is general and can be applied to construct other surface-DNA and protein-DNA hybrids. The reversibility, high mechanical stability and specificity provided by this linking procedure make it highly suitable for single molecule mechanical studies, as well as biosensing and lab on chip applications.

  2. A polypeptide-DNA hybrid with selective linking capability applied to single molecule nano-mechanical measurements using optical tweezers.

    Directory of Open Access Journals (Sweden)

    Fatemeh Moayed

    Full Text Available Many applications in biosensing, biomaterial engineering and single molecule biophysics require multiple non-covalent linkages between DNA, protein molecules, and surfaces that are specific yet strong. Here, we present a novel method to join proteins and dsDNA molecule at their ends, in an efficient, rapid and specific manner, based on the recently developed linkage between the protein StrepTactin (STN and the peptide StrepTag II (ST. We introduce a two-step approach, in which we first construct a hybrid between DNA and a tandem of two STs peptides (tST. In a second step, this hybrid is linked to polystyrene bead surfaces and Maltose Binding Protein (MBP using STN. Furthermore, we show the STN-tST linkage is more stable against forces applied by optical tweezers than the commonly used biotin-Streptavidin (STV linkage. It can be used in conjunction with Neutravidin (NTV-biotin linkages to form DNA tethers that can sustain applied forces above 65 pN for tens of minutes in a quarter of the cases. The method is general and can be applied to construct other surface-DNA and protein-DNA hybrids. The reversibility, high mechanical stability and specificity provided by this linking procedure make it highly suitable for single molecule mechanical studies, as well as biosensing and lab on chip applications.

  3. A Polypeptide-DNA Hybrid with Selective Linking Capability Applied to Single Molecule Nano-Mechanical Measurements Using Optical Tweezers

    Science.gov (United States)

    Tans, Sander J.

    2013-01-01

    Many applications in biosensing, biomaterial engineering and single molecule biophysics require multiple non-covalent linkages between DNA, protein molecules, and surfaces that are specific yet strong. Here, we present a novel method to join proteins and dsDNA molecule at their ends, in an efficient, rapid and specific manner, based on the recently developed linkage between the protein StrepTactin (STN) and the peptide StrepTag II (ST). We introduce a two-step approach, in which we first construct a hybrid between DNA and a tandem of two STs peptides (tST). In a second step, this hybrid is linked to polystyrene bead surfaces and Maltose Binding Protein (MBP) using STN. Furthermore, we show the STN-tST linkage is more stable against forces applied by optical tweezers than the commonly used biotin-Streptavidin (STV) linkage. It can be used in conjunction with Neutravidin (NTV)-biotin linkages to form DNA tethers that can sustain applied forces above 65 pN for tens of minutes in a quarter of the cases. The method is general and can be applied to construct other surface-DNA and protein-DNA hybrids. The reversibility, high mechanical stability and specificity provided by this linking procedure make it highly suitable for single molecule mechanical studies, as well as biosensing and lab on chip applications. PMID:23336001

  4. Encapsulation of C60 fullerenes into single-walled carbon nanotubes: Fundamental mechanical principles and conventional applied mathematical modeling

    Science.gov (United States)

    Baowan, Duangkamon; Thamwattana, Ngamta; Hill, James M.

    2007-10-01

    A well-known self-assembled hybrid carbon nanostructure is a nanopeapod which may be regarded as the prototype nanocarrier for drug delivery. While the investigation of the packing of C60 molecules inside a carbon nanotube is usually achieved through either experimentation or large scale computation, this paper adopts elementary mechanical principles and classical applied mathematical modeling techniques to formulate explicit analytical criteria and ideal model behavior for such encapsulation. In particular, we employ the Lennard-Jones potential and the continuum approximation to determine three encapsulation mechanisms for a C60 fullerene entering a tube: (i) through the tube open end (head-on), (ii) around the edge of the tube open end, and (iii) through a defect opening on the tube wall. These three encapsulation mechanisms are undertaken for each of the three specific carbon nanotubes (10,10), (16,16), and (20,20). We assume that all configurations are in vacuum and the C60 fullerene is initially at rest. Double integrals are performed to determine the energy of the system and analytical expressions are obtained in terms of hypergeometric functions. Our results suggest that the C60 fullerene is most likely to be encapsulated by head-on through the open tube end and that encapsulation around the tube edge is least likely to occur because of the large van der Waals energy barriers which exist at the tube ends.

  5. The mechanically adaptive connective tissue of echinoderms: its potential for bio-innovation in applied technology and ecology.

    Science.gov (United States)

    Barbaglio, A; Tricarico, S; Ribeiro, A; Ribeiro, C; Sugni, M; Di Benedetto, C; Wilkie, I; Barbosa, M; Bonasoro, F; Candia Carnevali, M D

    2012-05-01

    Echinoderms possess unique connective tissues, called mutable collagenous tissues (MCTs), which undergo nervously mediated, drastic and reversible or irreversible changes in their mechanical properties. Connective tissue mutability influences all aspects of echinoderm biology and is a key-factor in the ecological success of the phylum. Due to their sensitivity to endogenous or exogenous agents, MCTs may be targets for a number of common pollutants, with potentially drastic effects on vital functions. Besides its ecological relevance, MCT represents a topic with relevance to several applied fields. A promising research route looks at MCTs as a source of inspiration for the development of novel biomaterials. This contribution presents a review of MCT biology, which incorporates recent ultrastructural, biomolecular and biochemical analyses carried out in a biotechnological context.

  6. Experimental characterization and constitutive modeling of the mechanical behavior of molybdenum under electromagnetically applied compression-shear ramp loading

    Science.gov (United States)

    Alexander, C. S.; Ding, J. L.; Asay, J. R.

    2016-03-01

    Magnetically applied pressure-shear (MAPS) is a new experimental technique that provides a platform for direct measurement of material strength at extreme pressures. The technique employs an imposed quasi-static magnetic field and a pulsed power generator that produces an intense current on a planar driver panel, which in turn generates high amplitude magnetically induced longitudinal compression and transverse shear waves into a planar sample mounted on the drive panel. In order to apply sufficiently high shear traction to the test sample, a high strength material must be used for the drive panel. Molybdenum is a potential driver material for the MAPS experiment because of its high yield strength and sufficient electrical conductivity. To properly interpret the results and gain useful information from the experiments, it is critical to have a good understanding and a predictive capability of the mechanical response of the driver. In this work, the inelastic behavior of molybdenum under uniaxial compression and biaxial compression-shear ramp loading conditions is experimentally characterized. It is observed that an imposed uniaxial magnetic field ramped to approximately 10 T through a period of approximately 2500 μs and held near the peak for about 250 μs before being tested appears to anneal the molybdenum panel. In order to provide a physical basis for model development, a general theoretical framework that incorporates electromagnetic loading and the coupling between the imposed field and the inelasticity of molybdenum was developed. Based on this framework, a multi-axial continuum model for molybdenum under electromagnetic loading is presented. The model reasonably captures all of the material characteristics displayed by the experimental data obtained from various experimental configurations. In addition, data generated from shear loading provide invaluable information not only for validating but also for guiding the development of the material model for

  7. Progress Towards a Thermo-Mechanical Magma Chamber Forward Model for Eruption Cycles, Applied to the Columbia River Flood Basalts

    Science.gov (United States)

    Karlstrom, L.; Ozimek, C.

    2016-12-01

    Magma chamber modeling has advanced to the stage where it is now possible to develop self-consistent, predictive models that consider mechanical, thermal, and compositional magma time evolution through multiple eruptive cycles. We have developed such a thermo-mechanical-chemical model for a laterally extensive sill-like chamber beneath free surface, to understand physical controls on eruptive products through time at long-lived magmatic centers. This model predicts the relative importance of recharge, eruption, assimilation and fractional crystallization (REAFC, Lee et al., 2013) on evolving chemical composition as a function of mechanical magma chamber stability regimes. We solve for the time evolution of chamber pressure, temperature, gas volume fraction, volume, elemental concentration in the melt and crustal temperature field that accounts for moving boundary conditions associated with chamber inflation (and the possibility of coupled chambers at different depths). The density, volume fractions of melt and crystals, crustal assimilation and the changing viscosity and crustal properties of the wall rock are also tracked, along with joint solubility of water and CO2. The eventual goal is to develop an efficient forward model to invert for eruptive records at long-lived eruptive centers, where multiple types of data for eruptions are available. As a first step, we apply this model to a new compilation of eruptive data from the Columbia River Flood Basalts (CRFB), which erupted 210,000 km3 from feeder dikes in Washington, Oregon and Idaho between 16.9-6Ma. Data include volumes, timing and geochemical composition of eruptive units, along with seismic surveys and clinopyroxene geobarometry that constrain depth of storage through time. We are in the process of performing a suite of simulations varying model input parameters such as mantle melt rate, emplacement depth, wall rock compositions and rheology, and volatile content to explain volume, eruption timescales, and

  8. Effect of applied dc bias voltage on composition, chemical bonding and mechanical properties of carbon nitride films prepared by PECVD

    Institute of Scientific and Technical Information of China (English)

    LI Hong-xuan; XU Tao; HAO Jun-ying; CHEN Jian-min; ZHOU Hui-di; XUE Qun-ji; LIU Hui-wen

    2004-01-01

    Carbon nitride films were deposited on Si (100) substrates using plasma-enhanced chemical vapor deposition (PECVD) technique from CH4 and N2 at different applied dc bias voltage. The microstructure, composition and chemical bonding of the resulting films were characterized by Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). The mechanical properties such as hardness and elastic modulus of the films were evaluated using nano-indentation. As the results, the Raman spectra, showing the G and D bands, indicate the amorphous structure of the films. XPS and FTIR measurements demonstrate the existence of various carbon-nitride bonds in the films and the hydrogenation of carbon nitride phase. The composition ratio of N to C, the nano-hardness and the elastic modulus of the carbon nitride films increase with increasing dc bias voltage and reach the maximums at a dc bias voltage of 300 V, then they decrease with further increase of the dc bias voltage. Moreover, the XRD analyses indicate that the carbon nitride film contains some polycrystalline C3N4 phase embedded in the amorphous matrix at optimized deposition condition of dc bias voltage of 300 V.

  9. SDRE Control Applied to the Wheel Speed of a Compressed Air Engine with Crank-Connecting-Rod Mechanism

    Directory of Open Access Journals (Sweden)

    Alexandre de Castro Alves

    2017-01-01

    Full Text Available Renewable energy sources for vehicles have been the motivation of many researches around the world. The reduction of fossil fuels deposits and increase of the pollution in cities bring the need of more efficient and cleaner energy sources. In this way, this work will present the application of a compressed air engine applied to a bicycle. The engine is composed of two pneumatic cylinders connected to the bicycle wheel through a crank-connecting-rod mechanism. In order to control the velocity of the bicycle, a strategy of control composed of two controls was implemented: a feedback and a feedforward control. For feedback control, the State-Dependent Riccati Equation (SDRE control and also a proportional-derivative (PD control are considered, considering three cases for velocity bicycle variation: 10 km/h, 20 km/h, and 30 km/h. The equations of motion of the system were obtained through the Lagrangian energy method. Numerical simulations were performed in order to analyze the dynamics of the system and the efficiency of the controllers.

  10. Applied dynamics

    CERN Document Server

    Schiehlen, Werner

    2014-01-01

    Applied Dynamics is an important branch of engineering mechanics widely applied to mechanical and automotive engineering, aerospace and biomechanics as well as control engineering and mechatronics. The computational methods presented are based on common fundamentals. For this purpose analytical mechanics turns out to be very useful where D’Alembert’s principle in the Lagrangian formulation proves to be most efficient. The method of multibody systems, finite element systems and continuous systems are treated consistently. Thus, students get a much better understanding of dynamical phenomena, and engineers in design and development departments using computer codes may check the results more easily by choosing models of different complexity for vibration and stress analysis.

  11. On a Thermodynamic Mechanism of Dissipation of Mechanical Energy in Porous Elastomers as Applied to the Problem of Heating of Automobile Tires

    Science.gov (United States)

    Grinchuk, P. S.; Shnip, A. I.

    2016-11-01

    It has been shown that in the case of cyclic mechanical loads on a porous elastomer there are regimes in which irreversible processes of heat transfer between the gas and the elastomer are responsible for the appearance of a nonzero heat flux averaged over the period and directed from the gas into the condensed phase; this heat flux is compensated for with the dissipation of mechanical energy from the loading source. A possible influence of this mechanism of dissipation on the heating of automobile tires is assessed. Possible methods of recording of this effect are discussed.

  12. Condensing complex atmospheric chemistry mechanisms. 1: The direct constrained approximate lumping (DCAL) method applied to alkane photochemistry

    Energy Technology Data Exchange (ETDEWEB)

    Wang, S.W.; Georgopoulos, P.G. [Environmental and Occupational Health Sciences Inst., Piscataway, NJ (United States); Li, G.; Rabitz, H. [Princeton Univ., NJ (United States). Dept. of Chemistry

    1998-07-01

    Atmospheric chemistry mechanisms are the most computationally intensive components of photochemical air quality simulation models (PAQSMs). The development of a photochemical mechanism, that accurately describes atmospheric chemistry while being computationally efficient for use in PAQSMs, is a difficult undertaking that has traditionally been pursued through semiempirical (diagnostic) lumping approaches. The limitations of these diagnostic approaches are often associated with inaccuracies due to the fact that the lumped mechanisms have typically been optimized to fit the concentration profile of a specific species. Formal mathematical methods for model reduction have the potential (demonstrated through past applications in other areas) to provide very effective solutions to the need for computational efficiency combined with accuracy. Such methods, that can be used to condense a chemical mechanism, include kinetic lumping and domain separation. An application of the kinetic lumping method, using the direct constrained approximately lumping (DCAL) approach, to the atmospheric photochemistry of alkanes is presented in this work. It is shown that the lumped mechanism generated through the application of the DCAL method has the potential to overcome the limitations of existing semiempirical approaches, especially in relation to the consistent and accurate calculation of the time-concentration profiles of multiple species.

  13. Probabilistic fracture mechanics applied for DHC assessment in the cool-down transients for CANDU pressure tubes

    Energy Technology Data Exchange (ETDEWEB)

    Radu, Vasile, E-mail: vasile.radu@nuclear.ro [Institute for Nuclear Research Pitesti, 1st Campului Street, 115400 Mioveni, Arges, P.O. Box 78, Mioveni (Romania); Roth, Maria [Institute for Nuclear Research Pitesti, 1st Campului Street, 115400 Mioveni, Arges, P.O. Box 78, Mioveni (Romania)

    2012-12-15

    For CANDU pressure tubes made from Zr-2.5%Nb alloy, the mechanism called delayed hydride cracking (DHC) is widely recognized as main mechanism responsible for crack initiation and propagation in the pipe wall. Generation of some blunt flaws at the inner pressure tube surface during refueling by fuel bundle bearing pad or by debris fretting, combined with hydrogen/deuterium up-take (20-40 ppm) from normal corrosion process with coolant, may lead to crack initiation and growth. The process is governed by hydrogen hysteresis of terminal solid solubility limits in Zirconium and the diffusion of hydrogen atoms in the stress gradient near to a stress spot (flaw). Creep and irradiation growth under normal operating conditions promote the specific mechanisms for Zirconium alloys, which result in circumferential expansion, accompanied by wall thinning and length increasing. These complicate damage mechanisms in the case of CANDU pressure tubes that are also are affected by irradiation environment in the reactor core. The structural integrity assessment of CANDU fuel channels is based on the technical requirements and methodology stated in the Canadian Standard N285.8. Usually it works with fracture mechanics principles in a deterministic manner. However, there are inherent uncertainties from the in-service inspection, which are associated with those from material properties determination; therefore a necessary conservatism in deterministic evaluation should be used. Probabilistic approach, based on fracture mechanics principle and appropriate limit state functions defined as fracture criteria, appears as a promising complementary way to evaluate structural integrity of CANDU pressure tubes. To perform this, one has to account for the uncertainties that are associated with the main parameters for pressure tube assessment, such as: flaws distribution and sizing, initial hydrogen concentration, fracture toughness, DHC rate and dimensional changes induced by long term

  14. Effect of cell and microvillus mechanics on the transmission of applied loads to single bonds in dynamic force spectroscopy.

    Science.gov (United States)

    Gupta, V K; Eggleton, C D

    2011-07-01

    Receptor-ligand interactions that mediate cellular adhesion are often subjected to forces that regulate their detachment via modulating off-rates. Although the dynamics of detachment is primarily controlled by the physical chemistry of adhesion molecules, cellular features such as cell deformability and microvillus viscoelasticity have been shown to affect the rolling velocity of leukocytes in vitro through experiments and simulation. In this work, we demonstrate via various micromechanical models of two cells adhered by a single (intramolecular) bond that cell deformability and microvillus viscoelasticity modulate transmission of an applied external load to an intramolecular bond, and thus the dynamics of detachment. Specifically, it is demonstrated that the intermolecular bond force is not equivalent to the instantaneous applied force and that the instantaneous bond force decreases with cellular and microvillus compliance. As cellular compliance increases, not only does the time lag between the applied load and the bond force increase, an initial response time is observed during which cell deformation is observed without transfer of force to the bond. It is further demonstrated that following tether formation the instantaneous intramoleular bond force increases linearly at a rate dependent on microvillus viscosity. Monte Carlo simulations with fixed kinetic parameters predict that both cell and microvillus compliance increase the average rupture time, although the average rupture force based on bond length remains nearly unchanged.

  15. Application of Imaging Techniques to Mechanics of Materials and Structures, Volume 4 : Proceedings of the 2010 Annual Conference on Experimental and Applied Mechanics

    CERN Document Server

    2013-01-01

    This the fourth volume of six from the Annual Conference of the Society for Experimental Mechanics, 2010, brings together 58 chapters on Application of Imaging Techniques to Mechanics of Materials and Structure. It presents findings from experimental and computational investigations involving a range of imaging techniques including Recovery of 3D Stress Intensity Factors From Surface Full-field Measurements, Identification of Cohesive-zone Laws From Crack-tip Deformation Fields, Application of High Speed Digital Image Correlation for Vibration Mode Shape Analysis, Characterization of Aluminum Alloys Using a 3D Full Field Measurement, and Low Strain Rate Measurements on Explosives Using DIC.

  16. Automatic elucidation of electrode mechanisms by a knowledge-based system. Part 2: Staircase voltammetry, convolutive voltammetry and chronocoulometry applied to simple mechanisms

    NARCIS (Netherlands)

    Palys, M.J.; Palys, M.; Bos, M.; van der Linden, W.E.

    1991-01-01

    An improved expert system for the automatic elucidation of electrode reaction mechanisms is presented. The system is coupled to the electrochemical instrument, designs the experiment, controls it and collects the results automatically. The approximate logic concept is used to handle situations when

  17. Modifying the Marketing Mix of Library Services In Accordance With the Market Mechanism (An Applied Study at Jordanian Universities)

    OpenAIRE

    Basim Anagreh

    2012-01-01

    The concept of this research appeals for the library to be a recreational and scientific organization consistent with the local community, and interacts within the framework of the market mechanism qualifying it to face the challenges of the modern era and as well as creating self-funding library. The traditional presentation of the library services is not in line with the requirements of the marketing concepts. So, the concept of library as service organization has to be modified to meet con...

  18. Systematic study of the effects of mass and time scaling techniques applied in numerical rock mechanics simulations

    Science.gov (United States)

    Heinze, Thomas; Jansen, Gunnar; Galvan, Boris; Miller, Stephen A.

    2016-08-01

    Numerical modeling is a well established tool in rock mechanics studies investigating a wide range of problems. Implicit methods for solving linear equations have the advantage of being unconditionally stable, while explicit methods, although limited by the time step, are often used because of their limited memory demand, their scalability in parallel computing, and simple implementation of complex boundary conditions. In numerical modeling of explicit elastoplastic dynamics where the time step is limited by the material density, mass scaling techniques can be used to overcome this limit and significantly reduce computation time. While often used, the effect of mass and time scaling and how it may influence the numerical results is rarely-mentioned in publications, and choosing the right scaling technique is typically performed by trial and error. To our knowledge, no systematic studies have addressed how mass scaling might affect the numerical results. In this paper, we present results from an extensive and systematic study of the influence of mass and time scaling on the behavior of a variety of rock-mechanical models. We employ a finite difference scheme to model uniaxial and biaxial compression experiments using different mass and time scaling factors, and with physical models of increasing complexity up to a cohesion-weakening frictional-strengthening model (CWFS). We also introduce a normalized energy ratio to assist analyzing mass scaling effects. We find the tested models to be less sensitive to time scaling than to mass scaling, so mass scaling has higher potential for decreasing computational costs. However, we also demonstrate that mass scaling may lead to quantitatively wrong results, so care must be taken in interpreting stress values when mass scaling is used in complicated rock mechanics simulations. Mass scaling significantly influences the stress-strain response of numerical rocks because mass scaling acts as an artificial hardening agent on rock

  19. Nonlinear Hamiltonian mechanics applied to molecular dynamics theory and computational methods for understanding molecular spectroscopy and chemical reactions

    CERN Document Server

    Farantos, Stavros C

    2014-01-01

    This brief presents numerical methods for describing and calculating invariant phase space structures, as well as solving the classical and quantum equations of motion for polyatomic molecules. Examples covered include simple model systems to realistic cases of molecules spectroscopically studied. Vibrationally excited and reacting molecules are nonlinear dynamical systems, and thus, nonlinear mechanics is the proper theory to elucidate molecular dynamics by investigating invariant structures in phase space. Intramolecular energy transfer, and the breaking and forming of a chemical bond have now found a rigorous explanation by studying phase space structures.

  20. Atomic force microscopy applied to the quantification of nano-precipitates in thermo-mechanically treated microalloyed steels

    Energy Technology Data Exchange (ETDEWEB)

    Renteria-Borja, Luciano [Instituto Tecnologico de Morelia, Av. Tecnologico No. 1500, Lomas de Santiaguito, 58120 Morelia (Mexico); Hurtado-Delgado, Eduardo, E-mail: hurtado@itmorelia.edu.mx [Instituto Tecnologico de Morelia, Av. Tecnologico No. 1500, Lomas de Santiaguito, 58120 Morelia (Mexico); Garnica-Gonzalez, Pedro [Instituto Tecnologico de Morelia, Av. Tecnologico No. 1500, Lomas de Santiaguito, 58120 Morelia (Mexico); Dominguez-Lopez, Ivan; Garcia-Garcia, Adrian Luis [Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada-IPN Unidad Queretaro, Cerro Blanco No. 141, Colinas del Cimatario, 76090 Queretaro (Mexico)

    2012-07-15

    Quantification of nanometer-size precipitates in microalloyed steels has been traditionally performed using transmission electron microscopy (TEM), in spite of its complicated sample preparation procedures, prone to preparation errors and sample perturbation. In contrast to TEM procedures, atomic force microscopy (AFM) is performed on the as-prepared specimen, with sample preparation requirements similar to those for optical microscopy (OM), rendering three-dimensional representations of the sample surface with vertical resolution of a fraction of a nanometer. In AFM, contrast mechanisms are directly related to surface properties such as topography, adhesion, and stiffness, among others. Chemical etching was performed using 0.5% nital, at time intervals between 4 and 20 s, in 4 s steps, until reaching the desired surface finish. For the present application, an average surface-roughness peak-height below 200 nm was sought. Quantification results of nanometric precipitates were obtained from the statistical analysis of AFM images of the microstructure developed by microalloyed Nb and V-Mo steels. Topography and phase contrast AFM images were used for quantification. The results obtained using AFM are consistent with similar TEM reports. - Highlights: Black-Right-Pointing-Pointer We quantified nanometric precipitates in Nb and V-Mo microalloyed steels using AFM. Black-Right-Pointing-Pointer Microstructures of the thermo-mechanically treated microalloyed steels were used. Black-Right-Pointing-Pointer Topography and phase contrast AFM images were used for quantification. Black-Right-Pointing-Pointer AFM results are comparable with traditionally obtained TEM measurements.

  1. Postulating hypotheses in experimental doctoral dissertations on Applied Linguistics: A qualitative investigation into rhetorical shifts and linguistic mechanisms

    Directory of Open Access Journals (Sweden)

    Jason Miin-Hwa Lim

    2014-03-01

    Full Text Available The extent to which research hypotheses need to be incorporated in experimental studies often becomes a subject of discussion among academics supervising the writing of theses and dissertations. While writers are concerned about how hypotheses can be strategically linked with other elements in research reports to effectively present an introductory chapter, instructors are considering ways of guiding learners to use the appropriate language in postulating research hypotheses. Using an analytical framework developed by Swales (1990 & 2004 and specialist informants’ qualitative data, this largely qualitative investigation looks into a corpus of experimental doctoral dissertations submitted to 32 American universities from 2001 to 2009 in order to ascertain (i the degree to which research hypotheses need to be presented in dissertation introductions, (ii how hypotheses are strategically linked with other rhetorical segments, and (iii the salient linguistic mechanisms used to achieve the communicative functions. This study has revealed (i how writers shift from pertinent communicative moves to the postulation of hypotheses, and (ii the gamut of major language choices employed to postulate these hypotheses. The findings can be used to prepare teaching materials that help learners comprehend and employ the rhetorical strategies and linguistic mechanisms needed in postulating hypotheses in research reports.

  2. BOOK REVIEW: The Quantum Mechanics Solver: How to Apply Quantum Theory to Modern Physics, 2nd edition

    Science.gov (United States)

    Robbin, J. M.

    2007-07-01

    he hallmark of a good book of problems is that it allows you to become acquainted with an unfamiliar topic quickly and efficiently. The Quantum Mechanics Solver fits this description admirably. The book contains 27 problems based mainly on recent experimental developments, including neutrino oscillations, tests of Bell's inequality, Bose Einstein condensates, and laser cooling and trapping of atoms, to name a few. Unlike many collections, in which problems are designed around a particular mathematical method, here each problem is devoted to a small group of phenomena or experiments. Most problems contain experimental data from the literature, and readers are asked to estimate parameters from the data, or compare theory to experiment, or both. Standard techniques (e.g., degenerate perturbation theory, addition of angular momentum, asymptotics of special functions) are introduced only as they are needed. The style is closer to a non-specialist seminar rather than an undergraduate lecture. The physical models are kept simple; the emphasis is on cultivating conceptual and qualitative understanding (although in many of the problems, the simple models fit the data quite well). Some less familiar theoretical techniques are introduced, e.g. a variational method for lower (not upper) bounds on ground-state energies for many-body systems with two-body interactions, which is then used to derive a surprisingly accurate relation between baryon and meson masses. The exposition is succinct but clear; the solutions can be read as worked examples if you don't want to do the problems yourself. Many problems have additional discussion on limitations and extensions of the theory, or further applications outside physics (e.g., the accuracy of GPS positioning in connection with atomic clocks; proton and ion tumor therapies in connection with the Bethe Bloch formula for charged particles in solids). The problems use mainly non-relativistic quantum mechanics and are organised into three

  3. A Survey on Optimal Signal Processing Techniques Applied to Improve the Performance of Mechanical Sensors in Automotive Applications

    Science.gov (United States)

    Hernandez, Wilmar

    2007-01-01

    In this paper a survey on recent applications of optimal signal processing techniques to improve the performance of mechanical sensors is made. Here, a comparison between classical filters and optimal filters for automotive sensors is made, and the current state of the art of the application of robust and optimal control and signal processing techniques to the design of the intelligent (or smart) sensors that today's cars need is presented through several experimental results that show that the fusion of intelligent sensors and optimal signal processing techniques is the clear way to go. However, the switch between the traditional methods of designing automotive sensors and the new ones cannot be done overnight because there are some open research issues that have to be solved. This paper draws attention to one of the open research issues and tries to arouse researcher's interest in the fusion of intelligent sensors and optimal signal processing techniques.

  4. Multifactorial theory applied to the neurotoxicity of paraquat and paraquat-induced mechanisms of developing Parkinson's disease.

    Science.gov (United States)

    Zhang, Xiao-Feng; Thompson, Mark; Xu, Yi-Hua

    2016-05-01

    Laboratory studies involving repeated exposure to paraquat (PQ) in different animal models can induce many of the pathological features of Parkinson's disease (PD), such as the loss of dopaminergic neurons in the nigrostriatal dopamine system. Epidemiological studies identify an increased risk of developing PD in human populations living in areas where PQ exposure is likely to occur and among workers lacking appropriate protective equipment. The mechanisms involved in developing PD may not be due to any single cause, but rather a multifactorial situation may exist where PQ exposure may cause PD in some circumstances. Multifactorial theory is adopted into this review that includes a number of sub-cellular mechanisms to explain the pathogenesis of PD. The theory is placed into an environmental context of chronic low-dose exposure to PQ that consequently acts as an oxidative stress inducer. Oxidative stress and the metabolic processes of PQ-inducing excitotoxicity, α-synuclein aggregate formation, autophagy, alteration of dopamine catabolism, and inactivation of tyrosine hydroxylase are positioned as causes for the loss of dopaminergic cells. The environmental context and biochemistry of PQ in soils, water, and organisms is also reviewed to identify potential routes that can lead to chronic rates of low-dose exposure that would replicate the type of response that is observed in animal models, epidemiological studies, and other types of laboratory investigations involving PQ exposure. The purpose of this review is to synthesize key relations and summarize hypotheses linking PD to PQ exposure by using the multifactorial approach. Recommendations are given to integrate laboratory methods to the environmental context as a means to improve on experimental design. The multifactorial approach is necessary for conducting valid tests of causal relations, for understanding of potential relations between PD and PQ exposure, and may prevent further delay in solving what has

  5. Feasibility of Applying Clean Development Mechanism and GHGs Emission Reductions in the Gold Mining Industry: A Case of Thailand

    Science.gov (United States)

    Kittipongvises, Suthirat

    2015-12-01

    There is presently overwhelming scientific consensus that global climate change is indeed occurring, and that human activities are the primary driver. An increasingly resource and carbon constrained world will continue to pose formidable challenges to major industries, including mining. Understanding the implications of climate change mitigation for the mining industry, however, remains limited. This paper presents the results of a feasibility study on the implementation of a clean development mechanism and greenhouse gases (GHGs) emission reductions in the gold mining industry. It draws upon and extends the analysis of a case study conducted on gold mining operations in Thailand. The results from the case study indicated that total GHGs emissions by company A were approximately 36,886 tons carbon dioxide equivalents (tCO2e) per annual gold production capacity that meet the eligibility criteria for small-scaled clean development mechanism (CDM) projects. The electrostatic separation process was found to release the lowest amount of GHGs, whereas comminution (i.e. crushing and grinding) generated the highest GHGs emissions. By scope, the emission from purchased electricity (scope 2) is the most significant source. Opportunities for CDM projects implementation in the gold mining sector can be found in employing energy efficiency measures. Through innovation, some technical efficiency and technological development in gold processing (i.e. high pressure grinding rolls (HPGR), vertical roller mills (VRM), gravity pre-concentration and microwave heating technologies) that have the potential to reduce energy use and also lower carbon footprint of the gold mining were further discussed. The evidence reviews found that HPGR and VRM abatement technologies have shown energy and climate benefits as electricity savings and CO2 reduction of about 8-25.93 kWh/ton ore processed and 1.8-26.66 kgCO2/ton ore processed, respectively. Implications for further research and practice were

  6. Feasibility of Applying Clean Development Mechanism and GHGs Emission Reductions in the Gold Mining Industry: A Case of Thailand

    Directory of Open Access Journals (Sweden)

    Kittipongvises Suthirat

    2015-12-01

    Full Text Available There is presently overwhelming scientific consensus that global climate change is indeed occurring, and that human activities are the primary driver. An increasingly resource and carbon constrained world will continue to pose formidable challenges to major industries, including mining. Understanding the implications of climate change mitigation for the mining industry, however, remains limited. This paper presents the results of a feasibility study on the implementation of a clean development mechanism and greenhouse gases (GHGs emission reductions in the gold mining industry. It draws upon and extends the analysis of a case study conducted on gold mining operations in Thailand. The results from the case study indicated that total GHGs emissions by company A were approximately 36,886 tons carbon dioxide equivalents (tCO2e per annual gold production capacity that meet the eligibility criteria for small-scaled clean development mechanism (CDM projects. The electrostatic separation process was found to release the lowest amount of GHGs, whereas comminution (i.e. crushing and grinding generated the highest GHGs emissions. By scope, the emission from purchased electricity (scope 2 is the most significant source. Opportunities for CDM projects implementation in the gold mining sector can be found in employing energy efficiency measures. Through innovation, some technical efficiency and technological development in gold processing (i.e. high pressure grinding rolls (HPGR, vertical roller mills (VRM, gravity pre-concentration and microwave heating technologies that have the potential to reduce energy use and also lower carbon footprint of the gold mining were further discussed. The evidence reviews found that HPGR and VRM abatement technologies have shown energy and climate benefits as electricity savings and CO2 reduction of about 8-25.93 kWh/ton ore processed and 1.8-26.66 kgCO2/ton ore processed, respectively. Implications for further research and

  7. Microstructures and Recording Mechanism of Mo/Si Bilayer Applied for Write-Once Blue Laser Optical Recording

    Directory of Open Access Journals (Sweden)

    Sin-Liang Ou

    2014-01-01

    Full Text Available Mo/Si bilayer thin films were grown by magnetron sputtering and applied to write-once blu-ray disc (BD-R. The microstructures and optical storage properties of Mo/Si bilayer were investigated. From the temperature dependence of reflectivity measurement, it was revealed that a phase change occurred in the range of 255–425°C. Transmission electron microscopy analysis showed that the as-deposited film possessed Mo polycrystalline phase. The hexagonal MoSi2 and cubic Mo3Si phases appeared after annealing at 300 and 450°C, respectively. By measuring the optical reflectivity at a wavelength of 405 nm, the optical contrast of Mo/Si bilayer between as-deposited and 450°C-annealed states was evaluated to 25.8%. The optimum jitter value of 6.8% was obtained at 10.65 mW for 4× recording speed. The dynamic tests show that the Mo/Si bilayer has high potential in BD-R applications.

  8. A Survey on Optimal Signal Processing Techniques Applied to Improve the Performance of Mechanical Sensors in Automotive Applications

    Directory of Open Access Journals (Sweden)

    Wilmar Hernandez

    2007-01-01

    Full Text Available In this paper a survey on recent applications of optimal signal processing techniques to improve the performance of mechanical sensors is made. Here, a comparison between classical filters and optimal filters for automotive sensors is made, and the current state of the art of the application of robust and optimal control and signal processing techniques to the design of the intelligent (or smart sensors that today’s cars need is presented through several experimental results that show that the fusion of intelligent sensors and optimal signal processing techniques is the clear way to go. However, the switch between the traditional methods of designing automotive sensors and the new ones cannot be done overnight because there are some open research issues that have to be solved. This paper draws attention to one of the open research issues and tries to arouse researcher’s interest in the fusion of intelligent sensors and optimal signal processing techniques.

  9. Modifying the Marketing Mix of Library Services In Accordance With the Market Mechanism (An Applied Study at Jordanian Universities

    Directory of Open Access Journals (Sweden)

    Basim Anagreh

    2012-10-01

    Full Text Available The concept of this research appeals for the library to be a recreational and scientific organization consistent with the local community, and interacts within the framework of the market mechanism qualifying it to face the challenges of the modern era and as well as creating self-funding library. The traditional presentation of the library services is not in line with the requirements of the marketing concepts. So, the concept of library as service organization has to be modified to meet consumers (customers perceptions of the present generations through highlighting the library as an attractive organization. The development of the activity of the university library requires providing further additional services; such as photocopy services, cinema halls, and entertainment facilities for children, cafeteria, as well as providing the library with natural landscaping scenes and scientific atmospheres that encourage the educational process. Enabling the library to play its leading role as a productive organization in accordance with the ‘’supply and demand mechanism’’ requires also reformulation its marketing mix which allows the library to disseminate knowledge, raise the scientific level of the population categories and delivery of information to the largest number of citizens.

  10. Moving from capstones toward cornerstones: successes and challenges in applying systems biology to identify mechanisms of autism spectrum disorders.

    Science.gov (United States)

    Kopp, Nathan; Climer, Sharlee; Dougherty, Joseph D

    2015-01-01

    The substantial progress in the last few years toward uncovering genetic causes and risk factors for autism spectrum disorders (ASDs) has opened new experimental avenues for identifying the underlying neurobiological mechanism of the condition. The bounty of genetic findings has led to a variety of data-driven exploratory analyses aimed at deriving new insights about the shared features of these genes. These approaches leverage data from a variety of different sources such as co-expression in transcriptomic studies, protein-protein interaction networks, gene ontologies (GOs) annotations, or multi-level combinations of all of these. Here, we review the recurrent themes emerging from these analyses and highlight some of the challenges going forward. Themes include findings that ASD associated genes discovered by a variety of methods have been shown to contain disproportionate amounts of neurite outgrowth/cytoskeletal, synaptic, and more recently Wnt-related and chromatin modifying genes. Expression studies have highlighted a disproportionate expression of ASD gene sets during mid fetal cortical development, particularly for rare variants, with multiple analyses highlighting the striatum and cortical projection and interneurons as well. While these explorations have highlighted potentially interesting relationships among these ASD-related genes, there are challenges in how to best transition these insights into empirically testable hypotheses. Nonetheless, defining shared molecular or cellular pathology downstream of the diverse genes associated with ASDs could provide the cornerstones needed to build toward broadly applicable therapeutic approaches.

  11. Moving from Capstones towards Cornerstones: Successes and challenges in applying systems biology to identify mechanisms of autism spectrum disorders.

    Directory of Open Access Journals (Sweden)

    Nathan eKopp

    2015-10-01

    Full Text Available The substantial progress in the last few years towards uncovering genetic causes and risk factors for autism spectrum disorders (ASD has opened new experimental avenues for identifying the underlying neurobiological mechanism of the condition. The bounty of genetic findings has led to a variety of data-driven exploratory analyses aimed at deriving new insights about the shared features of these genes. These approaches leverage data from a variety of different sources such as co-expression in transcriptomic studies, protein-protein interaction networks, Gene Ontologies annotations, or multi-level combinations of all of these. Here, we review the recurrent themes emerging from these analyses and highlight some of the challenges going forward. Themes include findings that ASD associated genes discovered by a variety of methods have been shown to contain disproportionate amounts of neurite outgrowth/cytoskeletal, synaptic, and more recently Wnt-related and chromatin modifying genes. Expression studies have highlighted a disproportionate expression of ASD gene sets during mid fetal cortical development, particularly for rare-variants, with multiple analyses highlighting the striatum and cortical projection and interneurons as well. While these explorations have highlighted potentially interesting relationships among these ASD-related genes, there are challenges in how to best transition these insights into empirically testable hypotheses. Nonetheless, defining shared molecular or cellular pathology downstream of the diverse genes associated with autism spectrum disorders could provide the cornerstones needed to build towards broadly applicable therapeutic approaches.

  12. Understanding the Mechanisms behind Changing People’s Recycling Behavior at Work by Applying a Comprehensive Action Determination Model

    Directory of Open Access Journals (Sweden)

    Sunita Prugsamatz Ofstad

    2017-02-01

    Full Text Available This study moves toward a better understanding of the mechanisms behind changing people’s recycling behavior at work by mapping out which pathways and variables change in recycling behavior as triggered by interventions. A questionnaire was designed based on the theory of planned behaviour, the norm-activation model, habits, and a comprehensive action determination model (CADM. The data was collected in two rounds: before the intervention and after a three-month pilot period with implemented interventions using a sample of n = 1269 students and employees. The CADM model appears to be a good fit with the data. The results from the structural equation modelling indicate the pathways to influencing behavioural change. The most important psychological variables accounting for waste separation behaviour are intentions, perceived behavioural control, personal norms, social norms and habits. No difference in waste separation behaviour was observed in the control building. Interventions targeting the increase in waste separation raised participants’ intentions to engage in such behaviour. Results indicate that waste separation at work must go beyond technical aspects to include various key elements of sustainability to ensure success. Furthermore, understanding human behavior is key in determining the performance and success of an integrated and effective recycling intervention strategy.

  13. [Induction mechanism of shock: applying the etiology in judgment of the cause of death in forensic practice].

    Science.gov (United States)

    Tanaka, Noriyuki

    2004-09-01

    In the field of forensic medicine, shock has been identified as a cause of death owing to various kinds of exogenous insults. The etiology and pathogenesis of shock cannot be explained well by the usual gross appearance in medicolegal autopsies, because it is now generally established that the shock is a functional reaction of the vascular system to bodily injury, and that several organs are secondarily impaired during shock. Thus it seemed to forensic pathologists that these morphological changes in several organs after shock did not reveal any significant differences among the causes of death. We approached to the induction mechanism of shock, and we investigated what etiology induced these morphological changes after shock in order to identify shock as the cause of death. It is now generally accepted that the kidney is a target organ of shock, so we mainly investigated the cause of kidney disorder in a case of burn shock and hemorrhagic shock. 1. Consequences of bacterial translocation (BT) in the shock. The concept of BT indicates that the beginning of shock is induced by the loss of gut barrier function and consequent translocation of bacteria. In general, impaired gut barrier function can be caused either during the shock period by decreased intestinal blood flow and reduced oxygen delivery, resulting during reperfusion in a stage of increased intestinal blood flow, or at a later stage again by reduced flow. A variety of physiological stresses, such as trauma, hemorrhage, thermal injury, surgical operation, various kinds of drags and mental stress, have been shown to cause failure of the gut mucosal barrier, with translocation of bacteria/endotoxin from the gastrointestinal into the mesenteric lymph nodes, and translocation into remote organs and systemic circulation. 2. Burn shock. We designed to evaluate the BT in a burn shock rat model (following 20% full-thickness scald injury). The p38 MAPK pathway is an important stress-responsive signal molecule

  14. Exploration on the Practice Teaching of Engineering Mechanics in Applied Undergraduate%应用型本科工程力学实践教学探索

    Institute of Scientific and Technical Information of China (English)

    李俊文; 高波

    2012-01-01

    Engineering mechanics is an important basic course in engineering major of applied undergraduate, and the theory is close to practice. According to the training objective of applied undergraduate in our college, the practice teaching is researched on the establishment of content and the scheme of practice teaching, and it will provide a solid foundation for the teaching reform of engineering mechanics.%工程力学是应用型本科工科专业的一门重要专业基础课,也是一门理论与实践紧密结合的课程。结合广东技术师范学院应用型本科人才培养目标,从实践教学内容的设立以及实践教学开展方案两方面进行探讨与研究,为下一步全面实行工程力学教学改革奠定坚实的基础。

  15. Applied Fluid Mechanics. Lecture Notes.

    Science.gov (United States)

    Gregg, Newton D.

    This set of lecture notes is used as a supplemental text for the teaching of fluid dynamics, as one component of a thermodynamics course for engineering technologists. The major text for the course covered basic fluids concepts such as pressure, mass flow, and specific weight. The objective of this document was to present additional fluids…

  16. CHINESE JOURNAL OF APPLIED MECHANICS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    The isogeometric analysis for eigen problem of waveguide Abstract: In this paper, Isogeometric analysis (IGA) is extended to eigen-problem of waveguide in computational electromagnetics. The weakened equations are involved with NURBS elements from control equations in eigen problem of waveguide. Both rectangle and circular waveguide are addressed as numerical examples. The results demonstrate the proposed method consumes 1156 DOFs with 0.003 percent maximum relative error, much less than that of finite element method in the same mesh level, which consumes 2245 DOFs with 0.03 percent maximum relative error, i.e., IGA yields more excellent results, consumes less amount of DOFs, and obtains quicker convergence than traditional method.

  17. Applied Fluid Mechanics. Lecture Notes.

    Science.gov (United States)

    Gregg, Newton D.

    This set of lecture notes is used as a supplemental text for the teaching of fluid dynamics, as one component of a thermodynamics course for engineering technologists. The major text for the course covered basic fluids concepts such as pressure, mass flow, and specific weight. The objective of this document was to present additional fluids…

  18. Neurons in red nucleus and primary motor cortex exhibit similar responses to mechanical perturbations applied to the upper-limb during posture.

    Science.gov (United States)

    Herter, Troy M; Takei, Tomohiko; Munoz, Douglas P; Scott, Stephen H

    2015-01-01

    Primary motor cortex (M1) and red nucleus (RN) are brain regions involved in limb motor control. Both structures are highly interconnected with the cerebellum and project directly to the spinal cord, although the contribution of RN is smaller than M1. It remains uncertain whether RN and M1 serve similar or distinct roles during posture and movement. Many neurons in M1 respond rapidly to mechanical disturbances of the limb, but it remains unclear whether RN neurons also respond to such limb perturbations. We have compared discharges of single neurons in RN (n = 49) and M1 (n = 109) of one monkey during a postural perturbation task. Neural responses to whole-limb perturbations were examined by transiently applying (300 ms) flexor or extensor torques to the shoulder and/or elbow while the monkeys attempted to maintain a static hand posture. Relative to baseline discharges before perturbation onset, perturbations evoked rapid (<100 ms) changes of neural discharges in many RN (28 of 49, 57%) and M1 (43 of 109, 39%) neurons. In addition to exhibiting a greater proportion of perturbation-related neurons, RN neurons also tended to exhibit higher peak discharge frequencies in response to perturbations than M1 neurons. Importantly, neurons in both structures exhibited similar response latencies and tuning properties (preferred torque directions and tuning widths) in joint-torque space. Proximal arm muscles also displayed similar tuning properties in joint-torque space. These results suggest that RN is more sensitive than M1 to mechanical perturbations applied during postural control but both structures may play a similar role in feedback control of posture.

  19. Neurons in red nucleus and primary motor cortex exhibit similar responses to mechanical perturbations applied to the upper-limb during posture

    Directory of Open Access Journals (Sweden)

    Troy Michael Herter

    2015-04-01

    Full Text Available Primary motor cortex (M1 and red nucleus (RN are brain regions involved in limb motor control. Both structures are highly interconnected with the cerebellum and project directly to the spinal cord, although the contribution of RN is smaller than M1. It remains uncertain whether RN and M1 serve similar or distinct roles during posture and movement. Many neurons in M1 respond rapidly to mechanical disturbances of the limb, but it remains unclear whether RN neurons also respond to such limb perturbations. We have compared discharges of single neurons in RN (n = 49 and M1 (n = 109 of one monkey during a postural perturbation task. Neural responses to whole-limb perturbations were examined by transiently applying (300 ms flexor or extensor torques to the shoulder and/or elbow while the monkeys attempted to maintain a static hand posture. Relative to baseline discharges before perturbation onset, perturbations evoked rapid (<100 ms changes of neural discharges in many RN (28 of 49, 57% and M1 (43 of 109, 39% neurons. In addition to exhibiting a greater proportion of perturbation-related neurons, RN neurons also tended to exhibit higher peak discharge frequencies in response to perturbations than M1 neurons. Importantly, neurons in both structures exhibited similar response latencies and tuning properties (preferred torque directions and tuning widths in joint-torque space. Proximal arm muscles also displayed similar tuning properties in joint-torque space. These results suggest that RN is more sensitive than M1 to mechanical perturbations applied during postural control but both structures may play a similar role in feedback control of posture.

  20. Mechanical tension applied to substrate films specifies location of neuritogenesis and promotes major neurite growth at the expense of minor neurite development.

    Science.gov (United States)

    Feng, Zhang-Qi; Franz, Eric W; Leach, Michelle K; Winterroth, Frank; White, Christina M; Rastogi, Arjun; Gu, Zhong-Ze; Corey, Joseph M

    2016-04-01

    One obstacle in neural repair is facilitating axon growth long enough to reach denervated targets. Recent studies show that axonal growth is accelerated by applying tension to bundles of neurites, and additional studies show that mechanical tension is critical to all neurite growth. However, no studies yet describe how individual neurons respond to tensile forces applied to cell bodies and neurites simultaneously; neither do any test motor neurons, a phenotype critical to neural repair. Here we examine the growth of dissociated motor neurons on stretchable substrates. E15 spinal motor neurons were cultured on poly-lactide-co-glycolide films stretched at 4.8, 9.6, or 14.3 mm day(-1). Morphological analysis revealed that substrate stretching has profound effects on developing motor neurons. Stretching increases major neurite length; it also forces neuritogenesis to occur nearest poles of the cell closest to the sources of tension. Stretching also reduces the number of neurites per neuron. These data show that substrate stretching affects neuronal morphology by specifying locations on the cell where neuritogenesis occurs and favoring major neurite growth at the expense of minor neurites. These results serve as a building block for development of new techniques to control and improve the growth of neurons for nerve repair purposes.

  1. Damage mechanics applied to the seismic behavior of concrete structures; Application de la mecanique de l'endommagement pour le comportement de batiments sous seisme

    Energy Technology Data Exchange (ETDEWEB)

    Ghavamian, Shahrokh; Bonenfant, J. [NECS, F-92300 Sceaux (France); Jason, L. [CEA Saclay, LM2S, SEMT, DM2S, DEN, CEA, F-91191 Gif Sur Yvette (France)

    2010-07-01

    Complete text of publication follows: The seismic behavior of reinforced concrete structures is generally evaluated through modal spectral approaches, based on linear elastic analysis. In the case of seismic reevaluation of existing structures using traditional methods, since the nonlinear behavior of materials is not taken into account, these techniques often lead to an overestimation of the needs in reinforcement. In this contribution, it is proposed to highlight how including nonlinearity in the mechanical behavior of concrete and steel can improve the seismic evaluation of RC structures. For this purpose, a pushover technique is applied on an office building. Contrary to a classical approach, the progression of the failure mode and the mechanical degradation can be obtained and used to accurately elaborate the best retrofitting strategy. Some improvements of the constitutive laws are nevertheless needed if the use of this type of approaches is to be extended to more complex structures. However, the maturity of most constitutive models is not enough to allow industrial applications

  2. From basic physics to mechanisms of toxicity: the "liquid drop" approach applied to develop predictive classification models for toxicity of metal oxide nanoparticles.

    Science.gov (United States)

    Sizochenko, Natalia; Rasulev, Bakhtiyor; Gajewicz, Agnieszka; Kuz'min, Victor; Puzyn, Tomasz; Leszczynski, Jerzy

    2014-11-21

    Many metal oxide nanoparticles are able to cause persistent stress to live organisms, including humans, when discharged to the environment. To understand the mechanism of metal oxide nanoparticles' toxicity and reduce the number of experiments, the development of predictive toxicity models is important. In this study, performed on a series of nanoparticles, the comparative quantitative-structure activity relationship (nano-QSAR) analyses of their toxicity towards E. coli and HaCaT cells were established. A new approach for representation of nanoparticles' structure is presented. For description of the supramolecular structure of nanoparticles the "liquid drop" model was applied. It is expected that a novel, proposed approach could be of general use for predictions related to nanomaterials. In addition, in our study fragmental simplex descriptors and several ligand-metal binding characteristics were calculated. The developed nano-QSAR models were validated and reliably predict the toxicity of all studied metal oxide nanoparticles. Based on the comparative analysis of contributed properties in both models the LDM-based descriptors were revealed to have an almost similar level of contribution to toxicity in both cases, while other parameters (van der Waals interactions, electronegativity and metal-ligand binding characteristics) have unequal contribution levels. In addition, the models developed here suggest different mechanisms of nanotoxicity for these two types of cells.

  3. Applied combustion

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-31

    From the title, the reader is led to expect a broad practical treatise on combustion and combustion devices. Remarkably, for a book of modest dimension, the author is able to deliver. The text is organized into 12 Chapters, broadly treating three major areas: combustion fundamentals -- introduction (Ch. 1), thermodynamics (Ch. 2), fluid mechanics (Ch. 7), and kinetics (Ch. 8); fuels -- coal, municipal solid waste, and other solid fuels (Ch. 4), liquid (Ch. 5) and gaseous (Ch. 6) fuels; and combustion devices -- fuel cells (Ch. 3), boilers (Ch. 4), Otto (Ch. 10), diesel (Ch. 11), and Wankel (Ch. 10) engines and gas turbines (Ch. 12). Although each topic could warrant a complete text on its own, the author addresses each of these major themes with reasonable thoroughness. Also, the book is well documented with a bibliography, references, a good index, and many helpful tables and appendices. In short, Applied Combustion does admirably fulfill the author`s goal for a wide engineering science introduction to the general subject of combustion.

  4. From basic physics to mechanisms of toxicity: the ``liquid drop'' approach applied to develop predictive classification models for toxicity of metal oxide nanoparticles

    Science.gov (United States)

    Sizochenko, Natalia; Rasulev, Bakhtiyor; Gajewicz, Agnieszka; Kuz'min, Victor; Puzyn, Tomasz; Leszczynski, Jerzy

    2014-10-01

    Many metal oxide nanoparticles are able to cause persistent stress to live organisms, including humans, when discharged to the environment. To understand the mechanism of metal oxide nanoparticles' toxicity and reduce the number of experiments, the development of predictive toxicity models is important. In this study, performed on a series of nanoparticles, the comparative quantitative-structure activity relationship (nano-QSAR) analyses of their toxicity towards E. coli and HaCaT cells were established. A new approach for representation of nanoparticles' structure is presented. For description of the supramolecular structure of nanoparticles the ``liquid drop'' model was applied. It is expected that a novel, proposed approach could be of general use for predictions related to nanomaterials. In addition, in our study fragmental simplex descriptors and several ligand-metal binding characteristics were calculated. The developed nano-QSAR models were validated and reliably predict the toxicity of all studied metal oxide nanoparticles. Based on the comparative analysis of contributed properties in both models the LDM-based descriptors were revealed to have an almost similar level of contribution to toxicity in both cases, while other parameters (van der Waals interactions, electronegativity and metal-ligand binding characteristics) have unequal contribution levels. In addition, the models developed here suggest different mechanisms of nanotoxicity for these two types of cells.Many metal oxide nanoparticles are able to cause persistent stress to live organisms, including humans, when discharged to the environment. To understand the mechanism of metal oxide nanoparticles' toxicity and reduce the number of experiments, the development of predictive toxicity models is important. In this study, performed on a series of nanoparticles, the comparative quantitative-structure activity relationship (nano-QSAR) analyses of their toxicity towards E. coli and HaCaT cells were

  5. Applying Aspects of the Expert Performance Approach to Better Understand the Structure of Skill and Mechanisms of Skill Acquisition in Video Games.

    Science.gov (United States)

    Boot, Walter R; Sumner, Anna; Towne, Tyler J; Rodriguez, Paola; Anders Ericsson, K

    2016-11-20

    Video games are ideal platforms for the study of skill acquisition for a variety of reasons. However, our understanding of the development of skill and the cognitive representations that support skilled performance can be limited by a focus on game scores. We present an alternative approach to the study of skill acquisition in video games based on the tools of the Expert Performance Approach. Our investigation was motivated by a detailed analysis of the behaviors responsible for the superior performance of one of the highest scoring players of the video game Space Fortress (Towne, Boot, & Ericsson, ). This analysis revealed how certain behaviors contributed to his exceptional performance. In this study, we recruited a participant for a similar training regimen, but we collected concurrent and retrospective verbal protocol data throughout training. Protocol analysis revealed insights into strategies, errors, mental representations, and shifting game priorities. We argue that these insights into the developing representations that guided skilled performance could only easily have been derived from the tools of the Expert Performance Approach. We propose that the described approach could be applied to understand performance and skill acquisition in many different video games (and other short- to medium-term skill acquisition paradigms) and help reveal mechanisms of transfer from gameplay to other measures of laboratory and real-world performance.

  6. Mechanics

    CERN Document Server

    Hartog, J P Den

    1961-01-01

    First published over 40 years ago, this work has achieved the status of a classic among introductory texts on mechanics. Den Hartog is known for his lively, discursive and often witty presentations of all the fundamental material of both statics and dynamics (and considerable more advanced material) in new, original ways that provide students with insights into mechanical relationships that other books do not always succeed in conveying. On the other hand, the work is so replete with engineering applications and actual design problems that it is as valuable as a reference to the practicing e

  7. Elucidation of mechanisms in manganese and iron based oxidation catalysis : Mechanistic insights and development of novel approaches applied to transition metal catalyzed oxidations catalysis

    NARCIS (Netherlands)

    Angelone, Davide

    2016-01-01

    Oxidation chemistry is central to life and to the modern chemical industry and hence understanding chemical oxidation is essential to developing new processes and elucidating biological oxidation mechanisms. Elucidating mechanisms in inorganic oxidation catalysis and simultaneously developing new to

  8. Mechanical Mechanism Analysis of Geotextile Tubes Applied in Offshore Low-Crested Breakwaters%离岸浅堤中土工织物充填管状袋的力学机理分析

    Institute of Scientific and Technical Information of China (English)

    张文斌; 谭家华

    2007-01-01

    In existed researches, the mechanical mechanism analysis of geotextile tubes applied in this complicated new type of breakwaters was never considered. Based on the investigation of the mechanical properties of geotextile tubes,in this paper the stability and transmission behaviors of offshore low-crested breakwaters are studied.And the cross section shape and circumferential tension of geotextile tubes are obtained by the method of elliptic integrals.The numerical example results show that the geotextile tubes as the cores are reliable and the methods presented in this paper can be used efficiently in the design process of complicated new type breakwaters.%与传统的离岸堤相比,土工织物充填管状袋作为堤心构成的新型离岸潜堤形式不仅具有减小波浪力的作用,还具有经济和美观的功能.然而,在现有的研究中还没有对这一复杂新型式的防波堤中的土工织物充填管状袋的力学机理分析的考虑.本文在土工织物充填管状袋的力学性能研究的基础上,对离岸浅堤的稳定性和透射性能进行了研究.土工织物充填管状袋的横截面形状和周向拉力采用椭圆积分方法得到.计算实例结果表明:土工织物充填管状袋作为堤心是可靠的,同时,文中提出的研究方法可在复杂新型离岸浅堤的设计过程中发挥积极作用.

  9. Applied superconductivity

    CERN Document Server

    Newhouse, Vernon L

    1975-01-01

    Applied Superconductivity, Volume II, is part of a two-volume series on applied superconductivity. The first volume dealt with electronic applications and radiation detection, and contains a chapter on liquid helium refrigeration. The present volume discusses magnets, electromechanical applications, accelerators, and microwave and rf devices. The book opens with a chapter on high-field superconducting magnets, covering applications and magnet design. Subsequent chapters discuss superconductive machinery such as superconductive bearings and motors; rf superconducting devices; and future prospec

  10. Mechanics

    CERN Document Server

    Chester, W

    1979-01-01

    When I began to write this book, I originally had in mind the needs of university students in their first year. May aim was to keep the mathematics simple. No advanced techniques are used and there are no complicated applications. The emphasis is on an understanding of the basic ideas and problems which require expertise but do not contribute to this understanding are not discussed. How­ ever, the presentation is more sophisticated than might be considered appropri­ ate for someone with no previous knowledge of the subject so that, although it is developed from the beginning, some previous acquaintance with the elements of the subject would be an advantage. In addition, some familiarity with element­ ary calculus is assumed but not with the elementary theory of differential equations, although knowledge of the latter would again be an advantage. It is my opinion that mechanics is best introduced through the motion of a particle, with rigid body problems left until the subject is more fully developed. Howev...

  11. Applied mathematics

    CERN Document Server

    Logan, J David

    2013-01-01

    Praise for the Third Edition"Future mathematicians, scientists, and engineers should find the book to be an excellent introductory text for coursework or self-study as well as worth its shelf space for reference." -MAA Reviews Applied Mathematics, Fourth Edition is a thoroughly updated and revised edition on the applications of modeling and analyzing natural, social, and technological processes. The book covers a wide range of key topics in mathematical methods and modeling and highlights the connections between mathematics and the applied and nat

  12. Applied Enzymology.

    Science.gov (United States)

    Manoharan, Asha; Dreisbach, Joseph H.

    1988-01-01

    Describes some examples of chemical and industrial applications of enzymes. Includes a background, a discussion of structure and reactivity, enzymes as therapeutic agents, enzyme replacement, enzymes used in diagnosis, industrial applications of enzymes, and immobilizing enzymes. Concludes that applied enzymology is an important factor in…

  13. Elucidation of mechanisms in manganese and iron based oxidation catalysis: Mechanistic insights and development of novel approaches applied to transition metal catalyzed oxidations catalysis

    OpenAIRE

    Angelone, Davide

    2016-01-01

    Oxidation chemistry is central to life and to the modern chemical industry and hence understanding chemical oxidation is essential to developing new processes and elucidating biological oxidation mechanisms. Elucidating mechanisms in inorganic oxidation catalysis and simultaneously developing new tools to do so is the theme of this thesis. Spectroscopic techniques, especially Raman and UV-vis absorption, are used, together with Density Functional theory (DFT), to observe and characterise the ...

  14. Corrosion protection properties and interfacial adhesion mechanism of an epoxy/polyamide coating applied on the steel surface decorated with cerium oxide nanofilm: Complementary experimental, molecular dynamics (MD) and first principle quantum mechanics (QM) simulation methods

    Science.gov (United States)

    Bahlakeh, Ghasem; Ramezanzadeh, Bahram; Saeb, Mohammad Reza; Terryn, Herman; Ghaffari, Mehdi

    2017-10-01

    The effect of cerium oxide treatment on the corrosion protection properties and interfacial interaction of steel/epoxy was studied by electrochemical impedance spectroscopy, (EIS) classical molecular dynamics (MD) and first principle quantum mechanics (QM) simulation methods X-ray photoelectron spectroscopy (XPS) was used to verify the chemical composition of the Ce film deposited on the steel. To probe the role of the curing agent in epoxy adsorption, computations were compared for an epoxy, aminoamide and aminoamide modified epoxy. Moreover, to study the influence of water on interfacial interactions the MD simulations were executed for poly (aminoamide)-cured epoxy resin in contact with the different crystallographic cerium dioxide (ceria, CeO2) surfaces including (100), (110), and (111) in the presence of water molecules. It was found that aminoamide-cured epoxy material was strongly adhered to all types of CeO2 substrates, so that binding to ceria surfaces followed the decreasing order CeO2 (111) > CeO2 (100) > CeO2 (110) in both dry and wet environments. Calculation of interaction energies noticed an enhanced adhesion to metal surface due to aminoamide curing of epoxy resin; where facets (100) and (111) revealed electrostatic and Lewis acid-base interactions, while an additional hydrogen bonding interaction was identified for CeO2 (110). Overall, MD simulations suggested decrement of adhesion to CeO2 in wet environment compared to dry conditions. Additionally, contact angle, pull-off test, cathodic delamination and salt spray analyses were used to confirm the simulation results. The experimental results in line with modeling results revealed that Ce layer deposited on steel enhanced substrate surface free energy, work of adhesion, and interfacial adhesion strength of the epoxy coating. Furthermore, decrement of adhesion of epoxy to CeO2 in presence of water was affirmed by experimental results. EIS results revealed remarkable enhancement of the corrosion

  15. Mechanical evaluation of external skeletal fixator-intramedullary pin tie-in configurations applied to cadaveral humeri from red-tailed hawks (Buteo jamaicensis).

    Science.gov (United States)

    Van Wettere, Arnaud J; Redig, Patrick T; Wallace, Larry J; Bourgeault, Craig A; Bechtold, Joan E

    2009-12-01

    Use of external skeletal fixator-intramedullary pin (ESF-IM) tie-in fixators is an adjustable and effective method of fracture fixation in birds. The objective of this study was to determine the contribution of each of the following parameters to the compressive and torsional rigidity of an ESF-IM pin tie-in applied to avian bones with an osteotomy gap: (1) varying the fixation pin position in the proximal bone segment and (2) increasing the number of fixation pins in one or both bone segments. ESF-IM pin tie-in constructs were applied to humeri harvested from red-tailed hawks (Buteo jamaicensis) (n=24) that had been euthanatized for clinical reasons. Constructs with a variation in the placement of the proximal fixation pin and with 2, 3, or 4 fixation pins applied to avian bone with an osteotomy gap were loaded to a defined displacement in torque and axial compression. Response variables were determined from resulting load-displacement curves (construct stiffness, load at 1-mm displacement). Increasing the number of fixation pins from 1 to 2 per bone segment significantly increased the stiffness in torque (110%) and compression (60%), and the safe load in torque (107%) and compression (50%). Adding a fixation pin to the distal bone segment to form a 3-pin fixator significantly increased the stiffness (27%) and safe load (20%) in torque but not in axial compression. In the configuration with 2 fixation pins, placing the proximal pin distally in the proximal bone segment significantly increased the stiffness in torque (28%), and the safe load in torque (23%) and in axial compression (32%). Results quantified the relative importance of specific parameters affecting the rigidity of ESF-IM pin tie-in constructs as applied to unstable bone fracture models in birds.

  16. COMPARATIVE ANALYSIS OF MECHANICAL CHARACTERISTICS OF THE STEELS, APPLIED FOR PRODUCTION OF CHIPPING KNIVES, RECEIVED BY METHODS OF THERMAL AND THERMOMECHANICAL PROCESSINGS

    Directory of Open Access Journals (Sweden)

    A. V. Alifanov

    2014-01-01

    Full Text Available Results of researches of chemical composition of chipping knives of foreign and domestic producers are given in the article. Results of mechanical tests of samples with determination of temporary resistance, percentage elongation, ultimate strength at cross bending, bend from the various tool steels, subjected to heat treatment (tempering and thermomechanical processing with low tempering, are given. Recommendations on use of TO and TMO for investigated steels are given.

  17. Metabonomics applied in exploring the antitumour mechanism of physapubenolide on hepatocellular carcinoma cells by targeting glycolysis through the Akt-p53 pathway

    Science.gov (United States)

    Ma, Ting; Fan, Bo-Yi; Zhang, Chao; Zhao, Hui-Jun; Han, Chao; Gao, Cai-Yun; Luo, Jian-Guang; Kong, Ling-Yi

    2016-01-01

    Metabolomics can be used to identify potential markers and discover new targets for future therapeutic interventions. Here, we developed a novel application of the metabonomics method based on gas chromatography-mass spectrometry (GC/MS) analysis and principal component analysis (PCA) for rapidly exploring the anticancer mechanism of physapubenolide (PB), a cytotoxic withanolide isolated from Physalis species. PB inhibited the proliferation of hepatocellular carcinoma cells in vitro and in vivo, accompanied by apoptosis-related biochemical events, including the cleavage of caspase-3/7/9 and PARP. Metabolic profiling analysis revealed that PB disturbed the metabolic pattern and significantly decreased lactate production. This suggests that the suppression of glycolysis plays an important role in the anti-tumour effects induced by PB, which is further supported by the decreased expression of glycolysis-related genes and proteins. Furthermore, the increased level of p53 and decreased expression of p-Akt were observed, and the attenuated glycolysis and enhanced apoptosis were reversed in the presence of Akt cDNA or p53 siRNA. These results confirm that PB exhibits anti-cancer activities through the Akt-p53 pathway. Our study not only reports for the first time the anti-tumour mechanism of PB, but also suggests that PB is a promising therapeutic agent for use in cancer treatments and that metabolomic approaches provide a new strategy to effectively explore the molecular mechanisms of promising anticancer compounds. PMID:27416811

  18. pH recycling aqueous two-phase systems applied in extraction of Maitake β-Glucan and mechanism analysis using low-field nuclear magnetic resonance.

    Science.gov (United States)

    Hou, Huiyun; Cao, Xuejun

    2015-07-31

    In this paper, a recycling aqueous two-phase systems (ATPS) based on two pH-response copolymers PADB and PMDM were used in purification of β-Glucan from Grifola frondosa. The main parameters, such as polymer concentration, type and concentration of salt, extraction temperature and pH, were investigated to optimize partition conditions. The results demonstrated that β-Glucan was extracted into PADB-rich phase, while impurities were extracted into PMDM-rich phase. In this 2.5% PADB/2.5% PMDM ATPS, 7.489 partition coefficient and 96.92% extraction recovery for β-Glucan were obtained in the presence of 30mmol/L KBr, at pH 8.20, 30°C. The phase-forming copolymers could be recycled by adjusting pH, with recoveries of over 96.0%. Furthermore, the partition mechanism of Maitake β-Glucan in PADB/PMDM aqueous two-phase systems was studied. Fourier transform infrared spectra, ForteBio Octet system and low-field nuclear magnetic resonance (LF-NMR) were introduced for elucidating the partition mechanism of β-Glucan. Especially, LF-NMR was firstly used in the mechanism analysis in partition of aqueous two-phase systems. The change of transverse relaxation time (T2) in ATPS could reflect the interaction between polymers and β-Glucan.

  19. Performance and Mechanisms of Ultrafiltration Membrane Fouling Mitigation by Coupling Coagulation and Applied Electric Field in a Novel Electrocoagulation Membrane Reactor.

    Science.gov (United States)

    Sun, Jingqiu; Hu, Chengzhi; Tong, Tiezheng; Zhao, Kai; Qu, Jiuhui; Liu, Huijuan; Elimelech, Menachem

    2017-08-01

    A novel electrocoagulation membrane reactor (ECMR) was developed, in which ultrafiltration (UF) membrane modules are placed between electrodes to improve effluent water quality and reduce membrane fouling. Experiments with feedwater containing clays (kaolinite) and natural organic matter (humic acid) revealed that the combined effect of coagulation and electric field mitigated membrane fouling in the ECMR, resulting in higher water flux than the conventional combination of electrocoagulation and UF in separate units (EC-UF). Higher current densities and weakly acidic pH in the EMCR favored faster generation of large flocs and effectively reduced membrane pore blocking. The hydraulic resistance of the formed cake layers on the membrane surface in ECMR was reduced due to an increase in cake layer porosity and polarity, induced by both coagulation and the applied electric field. The formation of a polarized cake layer was controlled by the applied current density and voltage, with cake layers formed under higher electric field strengths showing higher porosity and hydrophilicity. Compared to EC-UF, ECMR has a smaller footprint and could achieve significant energy savings due to improved fouling resistance and a more compact reactor design.

  20. Modeling and simulation of three dimensional manipulations of biological micro/nanoparticles by applying cylindrical contact mechanics models by means of AFM

    Energy Technology Data Exchange (ETDEWEB)

    Korayem, M. H., E-mail: hkorayem@iust.ac.ir [Iran University of Science and Technology, Robotic Research Laboratory, School of Mechanical Engineering, Center of Excellence in Experimental Solid Mechanics and Dynamics (Iran, Islamic Republic of); Saraee, M. B. [Islamic Azad University, Department of Mechanical and Aerospace Engineering, Science and Research Branch (Iran, Islamic Republic of); Mahmoodi, Z.; Dehghani, S. [Iran University of Science and Technology, Robotic Research Laboratory, School of Mechanical Engineering, Center of Excellence in Experimental Solid Mechanics and Dynamics (Iran, Islamic Republic of)

    2015-11-15

    This paper has attempted to investigate the effective forces in 3D manipulation of biological micro/nano particles. Most of the recent researches have only examined 2D spherical geometries but in this paper, the cylindrical geometries, which are much closer to the real geometries, were considered. For achieving a more accurate modeling, manipulation dynamics was also considered to be three dimensional which have been done for the first time. Because of the sensibility to the amount of endurable applied forces, manipulation process of biological micro/nano particles has some restrictions. Therefore, applied forces exerted on the particles in all different directions were simulated in order to restrict all those possible damages cause by operator of the AFM. Those data from simulated forces will bring a more accurate and sensible understanding for the operator to operate. For the validation of results, the proposed model was compared with the model presented for manipulation of gold nanoparticle and then, by reducing the effective parameters in the 3D manipulation, the results were compared with those obtained for the 2D cylindrical model and with the experimental results of spherical nanoparticle in the 2D manipulation.

  1. Congestion based mechanism for route discovery in a V2I-V2V system applying smart devices and IoT.

    Science.gov (United States)

    Parrado, Natalia; Donoso, Yezid

    2015-03-31

    The Internet of Things is a new paradigm in which objects in a specific context can be integrated into traditional communication networks to actively participate in solving a determined problem. The Vehicle-to-Vehicle (V2V) and Vehicle-to-Infrastructure (V2I) technologies are specific cases of IoT and key enablers for Intelligent Transportation Systems (ITS). V2V and V2I have been widely used to solve different problems associated with transportation in cities, in which the most important is traffic congestion. A high percentage of congestion is usually presented by the inappropriate use of resources in vehicular infrastructure. In addition, the integration of traffic congestion in decision making for vehicular traffic is a challenge due to its high dynamic behavior. In this paper, an optimization model over the load balancing in the congestion percentage of the streets is formulated. Later, we explore a fully congestion-oriented route discovery mechanism and we make a proposal on the communication infrastructure that should support it based on V2I and V2V communication. The mechanism is also compared with a modified Dijkstra's approach that reacts at congestion states. Finally, we compare the results of the efficiency of the vehicle's trip with the efficiency in the use of the capacity of the vehicular network.

  2. Effectiveness of the mechanical excitation applied to the olive paste: possible improving of the oil yield, in malaxation phase, by vibration systems

    Directory of Open Access Journals (Sweden)

    Tullia Gallina Toschi

    2014-02-01

    Full Text Available The mechanical vibrations characterized by a frequency lower than 200 Hz could promote the cells breakage and improve the oil extraction process by avoiding, at the same time, the negative effects on the commercial qualitative parameters due to the use of the heating during malaxation. Vibration tests were conducted by means of an electrodynamic shaker in order to find the optimal frequency levels of excitation, able to put in a resonant condition the olive paste. Sinusoidal accelerations at constant acceleration (120 m/s2, in a range between 5 and 200 Hz were explored. The 50 Hz and 80 Hz frequencies were able to put in resonant condition the olive paste. In the vibrated samples at 50 Hz (15 min of treatment, the maximum increment of the extraction efficiency (about 53% in comparison with the control, was observed. Further studies could be conducted in order to assess the synergic effect of the mechanical vibrations and the malaxation on the oil extraction efficiency, with the aim of reducing the time of the whole phase and avoiding changes in the oil quality traits.

  3. Congestion Based Mechanism for Route Discovery in a V2I-V2V System Applying Smart Devices and IoT

    Directory of Open Access Journals (Sweden)

    Natalia Parrado

    2015-03-01

    Full Text Available The Internet of Things is a new paradigm in which objects in a specific context can be integrated into traditional communication networks to actively participate in solving a determined problem. The Vehicle-to-Vehicle (V2V and Vehicle-to-Infrastructure (V2I technologies are specific cases of IoT and key enablers for Intelligent Transportation Systems (ITS. V2V and V2I have been widely used to solve different problems associated with transportation in cities, in which the most important is traffic congestion. A high percentage of congestion is usually presented by the inappropriate use of resources in vehicular infrastructure. In addition, the integration of traffic congestion in decision making for vehicular traffic is a challenge due to its high dynamic behavior. In this paper, an optimization model over the load balancing in the congestion percentage of the streets is formulated. Later, we explore a fully congestion-oriented route discovery mechanism and we make a proposal on the communication infrastructure that should support it based on V2I and V2V communication. The mechanism is also compared with a modified Dijkstra’s approach that reacts at congestion states. Finally, we compare the results of the efficiency of the vehicle’s trip with the efficiency in the use of the capacity of the vehicular network.

  4. Congestion Based Mechanism for Route Discovery in a V2I-V2V System Applying Smart Devices and IoT

    Science.gov (United States)

    Parrado, Natalia; Donoso, Yezid

    2015-01-01

    The Internet of Things is a new paradigm in which objects in a specific context can be integrated into traditional communication networks to actively participate in solving a determined problem. The Vehicle-to-Vehicle (V2V) and Vehicle-to-Infrastructure (V2I) technologies are specific cases of IoT and key enablers for Intelligent Transportation Systems (ITS). V2V and V2I have been widely used to solve different problems associated with transportation in cities, in which the most important is traffic congestion. A high percentage of congestion is usually presented by the inappropriate use of resources in vehicular infrastructure. In addition, the integration of traffic congestion in decision making for vehicular traffic is a challenge due to its high dynamic behavior. In this paper, an optimization model over the load balancing in the congestion percentage of the streets is formulated. Later, we explore a fully congestion-oriented route discovery mechanism and we make a proposal on the communication infrastructure that should support it based on V2I and V2V communication. The mechanism is also compared with a modified Dijkstra’s approach that reacts at congestion states. Finally, we compare the results of the efficiency of the vehicle’s trip with the efficiency in the use of the capacity of the vehicular network. PMID:25835185

  5. Evaluation of chemical and mechanical resistance of virgin and recycled poly (ethylene terephthalate and poly(methylene oxide when applied as gravel pack in petroleum wells

    Directory of Open Access Journals (Sweden)

    Alexandre Zacarias Ignácio Pereira

    2015-08-01

    Full Text Available AbstractNowadays more and more unexpected uses for common materials have been observed, especially when recycled polymers are concerned. In this work, the viability for application of virgin and recycled poly(ethylene terephthalate (PETvir and PETrec, respectively and also poly(methylene oxide (PMO as granular materials (gravel for gravel packing in sand control systems for unconsolidated sandstone reservoirs was studied. Polymer samples were tested in conditions similar to those observed in Campos Basin sandstone formations, in Brazilian Southwest (70 °C and 24.1 MPa. Samples were individually confined in roller cells with chemicals used in formation treatment: hydrochloric acid, pentapotassic DTPA salt (chelant Trilon CK and in a mixture of diesel, xylene and butyl glycol. Mass loss was measured and the changes in molecular mass verified by size exclusion chromatography (SEC. Physical shape and grain size distribution were verified by scanning electron microscopy (SEM and sieving tests. The effects over the polymeric gravel pack confinement resistance and permeability were evaluated using an API permeability cell. PMO proved to have a limited use, whereas PETrec and PETvir samples were not significantly affected, suggesting the viability of applying that recycled polymer in gravel packing for sand control in petroleum wells.

  6. Comparative Study on Interaction of Form and Motion Processing Streams by Applying Two Different Classifiers in Mechanism for Recognition of Biological Movement

    Directory of Open Access Journals (Sweden)

    Bardia Yousefi

    2014-01-01

    Full Text Available Research on psychophysics, neurophysiology, and functional imaging shows particular representation of biological movements which contains two pathways. The visual perception of biological movements formed through the visual system called dorsal and ventral processing streams. Ventral processing stream is associated with the form information extraction; on the other hand, dorsal processing stream provides motion information. Active basic model (ABM as hierarchical representation of the human object had revealed novelty in form pathway due to applying Gabor based supervised object recognition method. It creates more biological plausibility along with similarity with original model. Fuzzy inference system is used for motion pattern information in motion pathway creating more robustness in recognition process. Besides, interaction of these paths is intriguing and many studies in various fields considered it. Here, the interaction of the pathways to get more appropriated results has been investigated. Extreme learning machine (ELM has been implied for classification unit of this model, due to having the main properties of artificial neural networks, but crosses from the difficulty of training time substantially diminished in it. Here, there will be a comparison between two different configurations, interactions using synergetic neural network and ELM, in terms of accuracy and compatibility.

  7. Mechanical analysis of ferritic stainless steel applied in radiation tubes in high temperature; Analise mecanica de acos inoxidaveis ferriticos aplicados em tubos de radiacao em altas temperaturas

    Energy Technology Data Exchange (ETDEWEB)

    Moreto, J.A.; Ponte, H.A.; Oliveira, V.L.; Silva, C.A. [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil)

    2008-07-01

    Nowadays Brazilian oil refineries face an important challenge: to adjust their units to the processing of more aggressive crudes. The use of this kind of oil has caused an increase on corrosion on process streams in high temperatures. This study's objective is to evaluate the changes in mechanic properties and phases processing occurred in tubes from de radiation furnaces type A268/446 Tp ferritic stainless steel tubes used in conditions of high temperatures. For comparison samples of the APM/Kanthal alloy tube were examined. Hot tensile tests were performed in the studied materials evidence bodies. The evidence bodies for the hot tensile tests were extracted from the longitudinal position of the tubes and were machined with cylindrical shape with threads. There was a series of trials for each tube (at different traction speeds) at temperature of 600 deg C. With the traction test it was possible to evaluate resistance and ductility characteristics and was used to establish criteria for quality control to ensure satisfactory performance in certain applications. Data testing creep were performed in the evidence bodies taken from the longitudinal position of the tubes in constant charge form. Data testing creep were executed in the constant stress mode at various levels of temperature. Through data testing creep it was possible to predict for how long the material is good for use. Data from testing creep were treated by the method of Larson and Miller. (author)

  8. Systemic structural modular generalization of the crystallography of bound water applied to study the mechanisms of processes in biosystems at the atomic and molecular level

    Science.gov (United States)

    Bulienkov, N. A.

    2011-07-01

    The main reasons of the modern scientific revolution, one of the consequences of which are nanotechnologies and the development of interdisciplinary overall natural science (which can build potentially possible atomic structures and study the mechanisms of the processes occurring in them), are considered. The unifying role of crystallography in the accumulation of interdisciplinary knowledge is demonstrated. This generalization of crystallography requires the introduction of a new concept: a module which reflects the universal condition for stability of all real and potential and equilibrium and nonequilibrium structures of matter (their connectivity). A modular generalization of crystallography covers all forms of solids, including the structure of bound water (a system-forming matrix for the self-organization and morphogenesis of hierarchical biosystems which determines the metric selection of all other structural components of these systems). A dynamic model of the water surface layer, which serves as a matrix in the formation of Langmuir monolayers and plays a key role in the occurrence of life on the Earth, is developed.

  9. Applied mathematics made simple

    CERN Document Server

    Murphy, Patrick

    1982-01-01

    Applied Mathematics: Made Simple provides an elementary study of the three main branches of classical applied mathematics: statics, hydrostatics, and dynamics. The book begins with discussion of the concepts of mechanics, parallel forces and rigid bodies, kinematics, motion with uniform acceleration in a straight line, and Newton's law of motion. Separate chapters cover vector algebra and coplanar motion, relative motion, projectiles, friction, and rigid bodies in equilibrium under the action of coplanar forces. The final chapters deal with machines and hydrostatics. The standard and conte

  10. Quantification of left ventricular mechanics using vector-velocity imaging, a novel feature tracking algorithm, applied to echocardiography and cardiac magnetic resonance imaging

    Institute of Scientific and Technical Information of China (English)

    LI Peng; MENG Hong; LIU Shi-zhen; Mani A Vannan

    2012-01-01

    Background Tagged magnetic resonance imaging (MRI) is the non-invasive golden standard to measure myocardial deformity.Tissue Doppler Imaging can be used to assess myocardial deformity,however,it has the limitation of angle-dependence.Our study aimed to compare left ventricular torsion and strains measured by velocity-vector imaging (VVI) using echocardiography (echo-VVI) and MRI (MRI-VVI),and to validate them against harmonic phase tagged MRI (HARP MRI).Methods A total number of 34 subjects (14 normal and 20 patients) were evaluated.Apical and basal image of left ventricular short axis view were acquired for measurements of apical and basal rotation.circumferential and radial strain using both echo-VVI and MRI-VVl.An apical four-chamber view was obtained for measuring the distance between the apical and basal levels.Results The correlations of segmental rotations,circumferential and radial strains were high between echo-VVI and HARP MRI,while the agreement of apical rotation was poor.Left ventricular torsion showed much better correlation and agreement between echo-VVI and HARP MRI than apical rotation:the coefficient was 0.97,P <0.001.The correlation between MRI-VVI and HARP MRI in quantifying rotational parameters and strains was similar with echo-VVI and HARP MRI.Echo-VVI could discriminate normal and dysfunctional ventricles on either hypertensive or dilated cardiomyopathy.Conclusion The data from this study show that (1) it is feasible to quantify left ventricular torsion and myocardial strain using echo-VVI and MRI-VVI in normal subjects,patients with left ventricular global systolic dysfunction and segment systolic dysfunction; (2) the agreement among all mechanical parameters derived from echo-VVl,MRI-VVI,and HARP MRI remained with clinically acceptable ranges.

  11. A detailed study of CO2-brine capillary trapping mechanisms as applied to geologic carbon storage. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Wildenschild, Dorthe [Oregon State Univ., Corvallis, OR (United States)

    2017-04-06

    The proposed research focuses on improved fundamental understanding of the efficiency of physical trapping mechanisms, and as such will provide the basis for subsequent upscaling efforts. The overarching hypothesis of the proposed research is that capillary pressure plays a significant role in capillary trapping of CO2, especially during the water imbibition stage of the sequestration process. We posit that the relevant physics of the sequestration process is more complex than is currently captured in relative permeability models, which are often based on so-called trapping models to represent relative permeability hysteresis. Our 4 main questions, guiding the 4 main tasks of the proposed research, are as follows: (1) What is the morphology of capillary trapped CO2 at the pore scale as a function of temperature, pressure, brine concentration, interfacial tension, and pore-space morphology under injection and subsequent imbibition? (2) Is it possible to describe the capillary trapping process using formation-dependent, but otherwise unique continuum-scale functions in permeability-capillary pressure, interfacial area and saturation space, rather than hysteretic functions in permeability-saturation or capillary pressure-saturation space? (3) How do continuum-scale relationships between kr-Pc-S-Anw developed based on pore-scale observations compare with traditional models incorporating relative permeability hysteresis (such as Land’s and other models,) and with observations at the core (5-10cm) scale? (4) How can trapped CO2 volume be optimized via engineered injection and sweep strategies, and as a function of formation type (incl. heterogeneity)?

  12. Applied Chaos Control

    Science.gov (United States)

    Spano, Mark

    1997-04-01

    The publication by Ott, Grebogi and Yorke(E. Ott, C. Grebogi and J. A. Yorke, Phys. Rev. Lett. 64, 1196 (1990).) of their theory of chaos control in 1990 led to an explosion of experimental work applying their theory to mechanical systems and electronic circuits, lasers and chemical reactors, and heart and brain tissue, to name only a few. In this talk the basics of chaos control as implemented in a simple mechanical system will be described, as well as extensions of the method to biological applications. Finally, current advances in the field, including the maintenance of chaos and the control of high dimensional chaos, will be discussed.

  13. Applied statistics for economists

    CERN Document Server

    Lewis, Margaret

    2012-01-01

    This book is an undergraduate text that introduces students to commonly-used statistical methods in economics. Using examples based on contemporary economic issues and readily-available data, it not only explains the mechanics of the various methods, it also guides students to connect statistical results to detailed economic interpretations. Because the goal is for students to be able to apply the statistical methods presented, online sources for economic data and directions for performing each task in Excel are also included.

  14. Applied chemical engineering thermodynamics

    CERN Document Server

    Tassios, Dimitrios P

    1993-01-01

    Applied Chemical Engineering Thermodynamics provides the undergraduate and graduate student of chemical engineering with the basic knowledge, the methodology and the references he needs to apply it in industrial practice. Thus, in addition to the classical topics of the laws of thermodynamics,pure component and mixture thermodynamic properties as well as phase and chemical equilibria the reader will find: - history of thermodynamics - energy conservation - internmolecular forces and molecular thermodynamics - cubic equations of state - statistical mechanics. A great number of calculated problems with solutions and an appendix with numerous tables of numbers of practical importance are extremely helpful for applied calculations. The computer programs on the included disk help the student to become familiar with the typical methods used in industry for volumetric and vapor-liquid equilibria calculations.

  15. Continuum mechanics

    CERN Document Server

    Spencer, A J M

    2004-01-01

    The mechanics of fluids and the mechanics of solids represent the two major areas of physics and applied mathematics that meet in continuum mechanics, a field that forms the foundation of civil and mechanical engineering. This unified approach to the teaching of fluid and solid mechanics focuses on the general mechanical principles that apply to all materials. Students who have familiarized themselves with the basic principles can go on to specialize in any of the different branches of continuum mechanics. This text opens with introductory chapters on matrix algebra, vectors and Cartesian ten

  16. Nonequilibrium flows with smooth particle applied mechanics

    Energy Technology Data Exchange (ETDEWEB)

    Kum, Oyeon [Univ. of California, Davis, CA (United States)

    1995-07-01

    Smooth particle methods are relatively new methods for simulating solid and fluid flows through they have a 20-year history of solving complex hydrodynamic problems in astrophysics, such as colliding planets and stars, for which correct answers are unknown. The results presented in this thesis evaluate the adaptability or fitness of the method for typical hydrocode production problems. For finite hydrodynamic systems, boundary conditions are important. A reflective boundary condition with image particles is a good way to prevent a density anomaly at the boundary and to keep the fluxes continuous there. Boundary values of temperature and velocity can be separately controlled. The gradient algorithm, based on differentiating the smooth particle expression for (uρ) and (Tρ), does not show numerical instabilities for the stress tensor and heat flux vector quantities which require second derivatives in space when Fourier`s heat-flow law and Newton`s viscous force law are used. Smooth particle methods show an interesting parallel linking to them to molecular dynamics. For the inviscid Euler equation, with an isentropic ideal gas equation of state, the smooth particle algorithm generates trajectories isomorphic to those generated by molecular dynamics. The shear moduli were evaluated based on molecular dynamics calculations for the three weighting functions, B spline, Lucy, and Cusp functions. The accuracy and applicability of the methods were estimated by comparing a set of smooth particle Rayleigh-Benard problems, all in the laminar regime, to corresponding highly-accurate grid-based numerical solutions of continuum equations. Both transient and stationary smooth particle solutions reproduce the grid-based data with velocity errors on the order of 5%. The smooth particle method still provides robust solutions at high Rayleigh number where grid-based methods fails.

  17. Nonequilibrium Flows with Smooth Particle Applied Mechanics.

    Science.gov (United States)

    Kum, Oyeon

    Smooth particle methods are relatively new methods for simulating solid and fluid flows though they have a 20-year history of solving complex hydrodynamic problems in astrophysics, such as colliding planets and stars, for which correct answers are unknown. The results presented in this thesis evaluate the adaptability or fitness of the method for typical hydrocode production problems. For finite hydrodynamic systems, boundary conditions are important. A reflective boundary condition with image particles is a good way to prevent a density anomaly at the boundary and to keep the fluxes continuous there. Boundary values of temperature and velocity can be separately controlled. The gradient algorithm, based on differentiating the smooth particle expressions for (urho) and (Trho), does not show numerical instabilities for the stress tensor and heat flux vector quantities which require second derivatives in space when Fourier's heat -flow law and Newton's viscous force law are used. Smooth particle methods show an interesting parallel linking them to molecular dynamics. For the inviscid Euler equation, with an isentropic ideal gas equation of state, the smooth particle algorithm generates trajectories isomorphic to those generated by molecular dynamics. The shear moduli were evaluated based on molecular dynamics calculations for the three weighting functions, B spline, Lucy, and Cusp functions. The accuracy and applicability of the methods were estimated by comparing a set of smooth particle Rayleigh -Benard problems, all in the laminar regime, to corresponding highly-accurate grid-based numerical solutions of continuum equations. Both transient and stationary smooth particle solutions reproduce the grid-based data with velocity errors on the order of 5%. The smooth particle method still provides robust solutions at high Rayleigh number where grid-based methods fails. Considerably fewer smooth particles are required than atoms in a corresponding molecular dynamics simulations of Rayleigh-Benard convection. Nevertheless, the smooth particle trajectories are essentially Newtonian trajectories, for particles with mass m, subject to an effective potential function 2Pn-^{ -2}w(r). Accordingly, high-pressure subsonic problems, with v^2 << c^2, cannot be reliably solved using this method. A further limitation of the method is its inability to treat free surfaces accurately. Not just subsonic flows can be treated. Shock waves propagate very well in smooth particle systems. For the Richtmyer-Meshkov instability problem with a small amplitude interface perturbation, compared to the wavelength, the interface amplitude grows linearly and the growth rate agrees with the analytic value within 3%. The smooth particle method promises to be of special interest whenever it is desirable to include fluctuations. Smooth particles also provide an interesting eddy viscosity for use in turbulence studies.

  18. Topics in Applied Continuum Mechanics : Symposium

    CERN Document Server

    Ziegler, F

    1974-01-01

    THE FOUNDATIONS OF THERMOELASTICITY-EXPERIMENTS AND THEORY (A. PHILLIPS) 1. Introduction 2. The initial yield surface 4 3. The subsequent yield surface 6 4. Some theoretical consequences 10 References 13 ON THE PHYSICS AND MATHEMATICS OF SELF-STRESSES (E. KRONER) 1. Introduction 22 2. The physical origin of the self-stresses 23 3. Formulation of the mathematical problem of self-stresses 27 4. The method of modified Green's functions 30 5. Concluding remarks 35 References 38 DISTORTION IN MICROPOLAR ELASTICITY (W. NOWACKI) 1. Fundamental relations and equations 39 2. Principle of virtual work 42 3. Theorem of minimum of the complimentary work 43 • 4. Reciprocity theorem 44 5. Equations in displacements and rotations 47 6. Compatibility equations 51 References 57 THE YIELD CRITERION IN THE GENERAL CASE OF NONHOMOGENEOUS STRESS AND DEFORMATION FIELDS (J. A. KONIG and W. OLSZAK) 1. Introduction 58 2. The plasticity condition 61 3. Special cases of the yield condition 62 4. Example: Pure bending 63 5. Criteria f...

  19. Composite Overwrapped Pressure Vessels (COPV) Monitoring System Using Fiber Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Intelligent Fiber Optic Systems Corporation (IFOS) proposes, in this Phase 1 SBIR project, to demonstrate the feasibility of innovations based on an...

  20. Nanotechnology (NT): CNT Reinforced COPV Flight Test Project

    Data.gov (United States)

    National Aeronautics and Space Administration — •Develop ultralightweight, high strength composites from carbon nanotube reinforcementsTargeting specific strength 1.5 to 2X that of conventional aerospace...

  1. 将机械式直线加速器用于采油机械的设想%An idea of applying mechanical linear accelerator to oil pumping system

    Institute of Scientific and Technical Information of China (English)

    刘泽峰; 李少果; 黄清世

    2001-01-01

    Mechanical linear accelerator is a new transmission devicedesigned on the basis of the parallel straight push rod linear reducer. To make use of its acceleration and stroke increment functions, an idea of applying the mechanical linear accelerator to oil pumping system is put forward. The design schemes for long stroke pumping unit and downhole stroke increment device both equipped with the mechanical linear accelerator are presented. The long stroke pumping unit with the linear accelerator is easy to realize compound balance and is predicted to have high mechanical efficiency and long service life. The downhole stroke increment device with the linear accelerator can increase the stroke of the subsurface pump plunger, therefore it provides the condition for modifying the existing pumping systems to long stroke pumping systems.%机械式直线加速器是根据平行直动推杆传动机构设计而成的新型传动装置,利用其加速和增程功能,提出两种采取对称布置的直线加速器实现长冲程、低冲次的抽油装置设计新方案:(1)采用直线加速器的长冲程抽油机,其结构合理,便于实现复合平衡,预计有较高的机械效率和较长的使用寿命;(2)采用直线加速器的抽油机井下增程装置,可使地面设备结构紧凑,比同类型长冲程抽油机的悬点载荷相对较低,对现有抽油机实施长冲程改造有着重要的实际意义。

  2. Applied statistical thermodynamics

    CERN Document Server

    Lucas, Klaus

    1991-01-01

    The book guides the reader from the foundations of statisti- cal thermodynamics including the theory of intermolecular forces to modern computer-aided applications in chemical en- gineering and physical chemistry. The approach is new. The foundations of quantum and statistical mechanics are presen- ted in a simple way and their applications to the prediction of fluid phase behavior of real systems are demonstrated. A particular effort is made to introduce the reader to expli- cit formulations of intermolecular interaction models and to show how these models influence the properties of fluid sy- stems. The established methods of statistical mechanics - computer simulation, perturbation theory, and numerical in- tegration - are discussed in a style appropriate for newcom- ers and are extensively applied. Numerous worked examples illustrate how practical calculations should be carried out.

  3. Technical Letter Report - Analysis of Ultrasonic Data on Piping Cracks at Ignalina Nuclear Power Plant Before and After Applying a Mechanical Stress Improvement Process, JCN-N6319, Task 2

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Michael T.; Cumblidge, Stephen E.; Crawford, Susan L.

    2008-02-26

    Pacific Northwest National Laboratory (PNNL) is assisting the United States Nuclear Regulatory Commission (NRC) in developing a position on the management of primary water stress corrosion cracking (PWSCC) in piping systems previously analyzed for leak-before-break (LBB). Part of this work involves determining whether inspections alone are sufficient or if inspections plus mitigation techniques are needed. The work described in this report addresses the reliability of ultrasonic phased-array (PA) examinations for inspection of cracks that have been subjected to the mitigation method of mechanical stress improvement process (MSIP). It is believed that stresses imparted during MSIP may make ultrasonic crack responses in piping welds more difficult to detect and accurately characterize. To explore this issue, data were acquired, both before and after applying MSIP, and analyzed from cracked areas in piping at the Ignalina Nuclear Power Plant (INPP) in Lithuania. This work was performed under NRC Project JCN-N6319, PWSCC in Leak-Before-Break Systems.

  4. Mechanical Kinesiology.

    Science.gov (United States)

    Barham, Jerry N.

    Mechanical kinesiology is defined as a study of the mechanical factors affecting human movement, i.e., applying the physical laws of mechanics to the study of human motor behavior. This textbook on the subject is divided into thirty lessons. Each lesson is organized into three parts: a part on the text proper; a part entitled "study…

  5. Exploration on Soil Mechanics Experimental Teaching Method for Applied Undergraduate Institute%应用型本科院校土力学实验教学方法探索

    Institute of Scientific and Technical Information of China (English)

    黎春林

    2014-01-01

    According to teaching demands of soil mechanics in applied undergraduate institute, some reforming measures about the experimental teaching objectives, teaching method and evaluation policy are taken in soil mechanics. Comprehensive experiment and designing experiment are paid more attention to. In the course of the experiment, engineering practice and developing innovatory ability are given prominence. And student performance is appreciated throughout the experiment. Thanks to the teaching reform, students' enthusiasm for learning and engineering application abilities are promoted during the experiment.%根据应用型本科院校土力学实验的教学要求,对土力学实验课程的教学目标、教学方式和课程评价方法进行了改革,增加了综合性实验和设计性实验,在实验过程中突出工程实践,鼓励学生创新,在教学评价上重视学生在实验过程中的表现,激发学生的学习热情,促进学生工程应用能力的培养。

  6. 应用型本科院校材料力学实验教学改革的探讨%Exploration and practice of the reform in the experimental teaching of material mechanics in applied undergraduate colleges

    Institute of Scientific and Technical Information of China (English)

    朱街禄; 兰美娟

    2015-01-01

    针对应用型本科院校材料力学实验教学的现状,提出了重视验证性实验改进实验课程的教学方法和教学模式、加强实验室的建设、建立科学合理的实验考核方式等教学改革措施,以提高学生学习的积极性,为后续课程打下较好的力学基础。%In light of material mechanics experiment teaching status of applied undergraduate colleges,the paper puts forward teaching reform methods,such as emphasizing testing experiment,improving experiment curriculum teaching method and teaching mode,strengthening laboratory construction,and establishing scientific and rational experiment assessment methods,with a view to improve students’learning activity,which has laid a foundation for continuous mechanics learning.

  7. Mechano-active scaffold design based on microporous poly(L-lactide-co-epsilon-caprolactone) for articular cartilage tissue engineering: dependence of porosity on compression force-applied mechanical behaviors.

    Science.gov (United States)

    Xie, Jun; Ihara, Maki; Jung, Youngmee; Kwon, Il Keun; Kim, Soo Hyun; Kim, Young Ha; Matsuda, Takehisa

    2006-03-01

    An essential component of functional articular cartilage tissue engineering is a mechano-active scaffold, which responds to applied compression stress and causes little permanent deformation. As the first paper of a series on mechano-active scaffold-based cartilage tissue engineering, this study focused on mechanical responses to various modes of loading of compression forces and subsequent selection of mechano-active scaffolds from the biomechanical viewpoint. Scaffolds made of elastomeric microporous poly(L-lactide-co-epsilon-caprolactone) (PLCL) with open-cell structured pores (300 approximately 500 microm) and with different porosities ranging from 71 to 86% were used. The PLCL sponges and rabbit articular cartilage tissue were subjected to compression/unloading tests (0.1 and 0.005 Hz) at 5 kPa, and stress relaxation tests at 10, 30, and 50% strain. The measurements of the maximum strain under loading and residual strain under unloading for compression tests and the maximum stress and equilibrium stress in the stress relaxation test showed that the lower the porosity, the closer the mechanical properties are to those of native cartilage tissue. Among the PLCL sponges, the sponge with 71% porosity appears to be a suitable cartilage scaffold.

  8. Improvement of the controllability of mechanical pulping processes by applying advanced control systems and pulp quality meters. Hierteen ja hiokkeen valmistuksen hallinnan parantaminen kehittyneen automaatiojaerjestelmaen ja massan laatumittareiden avulla

    Energy Technology Data Exchange (ETDEWEB)

    Pietinen, P. (Yhtyneet Paperitehtaat Oy, Kajaani (Finland))

    1991-01-01

    The objective of this study was to improve the controllability of the groundwood grinders and thermomechanical refiners in Kajaani paper mill by applying modern control and measuring techniques. The aim was to minimize the quality fluctuation in the mechanical pulp lines and to improve the energy efficiency of the mechanical pulping processes. A new control system was introduced in our stone groundwood mill (SGW). By means of this new advanced stone groundwood control and information system the controllability of the grinders improved markedly, and because of that the pulp strength properties improved by over 5 % and the quality variations decreased by 40 %. The energy consumption of the grinders increased by about 5 %, which was caused by the choice of a control strategy. The controllability of the pressurised groundwood grinders (PGW) was poor. After the grinders being repaired, the pulp strength properties improved by about 10 %. The control solutions developed for SGW plant were modified to meet the PGW requirements. An on-line freeness tester, is going to be used to measure the pit pulp quality. The results will be utilized when the old process computer is renewed. The most suitable on-line pulp quality analyzers for our thermomechanical plant were found by testing various equipment. Through minimizing the quality fluctuation of the mechanical pulp it is possible to save about 30-35 GWh (4 %) of energy in Kajaani annually. In addition it is possible to save another 2 - 4 % energy in TMP-refiners by a suitable control strategy without affecting the pulp quality. But energy savings bigger than that can only be reached by deteriorating the pulp quality.

  9. Calibração da técnica de moiré aplicada a perfilometria de protótipos mecânicos Calibration method applied to a moiré technique in experiments of mechanical archetypes

    Directory of Open Access Journals (Sweden)

    Túlio Seabra Gomes

    2009-04-01

    Full Text Available A perfilometria é uma técnica amplamente utilizada na construção de mapas e gráficos de relevos aplicados a uma vasta área do conhecimento. Frente às necessidades de suprir a demanda da indústria e da área de desenvolvimento de protótipos quanto a técnicas não invasivas na investigação da superfície de materiais em geral, o presente trabalho buscou propor uma metodologia de calibração aplicada à técnica de moiré para investigações perfilométricas em protótipos mecânicos buscando baixos custos e flexibilidade. A técnica de moiré consiste na comparação de dois retículos periódicos, onde um segue o comportamento da superfície do objeto (retículo modelo - Rm e outro não está deformado, seguindo o comportamento de um plano de referência, (retículo de referência - Rr. A luz que passa entre os retículos se sobrepõe formando padrões de moiré ou franjas de moiré que se comportam como ondas senoidais. Nos ensaios de calibração, usou-se um cone de relevo conhecido para a determinação de uma constante de correção de mapas gerados digitalmente. Os ensaios realizados aplicaram a metodologia para a determinação do perfil de um mouse de computador e para a determinação da deformação de uma chapa metálica. A metodologia proposta para a calibração da técnica de moiré mostrouse capaz de realizar os mapeamentos, com resolução máxima na ordem de centésimos de milímetros, podendo então ser usada em aplicações com níveis de precisão inferiores a essa ordem.Profilometry is a measurement technique widely used in map and relief graphic construction, being applied to vast areas of knowledge. The aim of the present investigation was to introduce a calibration method applied to a moiré technique in experiments of mechanical archetypes, with low cost and flexibility, due to the need for supplying demands from both industry and mechanical archetype development for non-invasive techniques. The moir

  10. Discussion on Teaching Reform of Soil Mechanics Aiming to Train Applied Talents%以应用型人才培养为目标的土力学教学改革探讨

    Institute of Scientific and Technical Information of China (English)

    熊浩

    2012-01-01

    Soil mechanics is a significant specialized basic course in the culturing system for architectural civil engineering specialty or transportation engineering. It is a required course with rich theoretical knowledge and strong requirements for practical abilities. The paper analyses in detail some problems during the teaching process of the course. Some countermeasures are presented for solving them, combined with demands for cultivating applied talents, which mainly includes renovating continuously the teaching contents oriented by engineering applications, exploring some new teaching methods to improve the classroom efficiency and paying more attention to experiment teaching for reinforcing students' practical abilities.%土力学作为建筑工程、交通工程等专业培养体系中一门重要的专业基础课,强调理论学习与实践并重。详细分析了该课程在教学过程中存在的问题,结合应用人才培养的目标,提出土力学教学应以工程应用为导向,不断更新教学内容;探索引入不同的教学方法如案例教学、协同教学等方法以提升课堂教学效果;重视实验教学工作以增强学生的动手能力。

  11. Experience report of the testing of an air source heat pump at the Faculty of Mechanical and Energy Engineering of the Leipzig University of Applied Science; Erfahrungsbericht aus der Betriebsfuehrung einer Luftwaermepumpe an der Fakultaet ME der HTWK Leipzig

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, R.; Rackwitz, A. [HTWK Leipzig, Markkleeberg (Germany). Fakultaet ME

    2009-07-01

    Because the demand of fuels (for example coal and oil) and the energy costs rise continuously and the nuclear phaseout is resolved, it is advisable to analyse different alternatives of the generation and supply of electrical energy and thermoelectricity with renewable forms of energy. The technical optimize and a economic operation of the different alternatives are most important points of tests. This was the reason why at the Faculty of Mechanical and Energy Engineering of the Leipzig University of Applied Science a test rig ''renewable forms of energy'' was built up step by step in the last eleven years, which includes different test facilities, for example two photovoltaic systems with different tracking systems, two wind-mills and an air-water-heat-pump. The new air-water-heat-pump has a rated power-input of 2,74 kW{sub el} and should support the central heating in the new laboratory- and college-building in the next years. At first the heat-pump is tested to analyse the economical and technical conditions. The first results of the tests confirm the technical information of the heat-pump producer. Further long-time measurements are considered for the next months. (orig.)

  12. Study on Wireless Mesh Network Applied to Remote Monitoring and Control of Electromechanical Equipment in Fully Mechanized Coal Mining Face%无线Mesh网络在综采面机电设备远程监控的研究

    Institute of Scientific and Technical Information of China (English)

    季晓刚; 王忠宾; 周信

    2011-01-01

    In order to realize the remote control of the electromechanical equipment applied to the fully mechanized coal mining face, the paper analyzed the advantages and disadvantages of the wire industrial ethernet, traditional wireless communication way and the new technical Zigbee and others applied to the underground mine. The research and development of the intrinsic safe wireless network system was provided based on the wireless Mesh technology and a wireless Mesh network was established for the electromechanical equipment of the fully mechanized coal mining face. The paper stated the design principle and operation theory of the general frame and the nodes. The industrial trial results from No. 2 Mine of Pingdingshan Coal Mining Group showed that according to the length and slope of the coal mining face, a certain amount of wireless Mesh switchboards was selected. The critical value of the received signal strength would be -85 dBm. The distance between the Mesh switchboards was adjusted and generally the disposable distance between the two Mesh switchboards would not be over 66 m. The antenna of the switchboard should be installed in horizontal or upward. Thus the wireless Mesh network would have excellent communication effect in the fully mechanized coal mining face and could meet the requirements of the performances data and video transmission of the electromechanical equipment.%为了实现煤矿综采工作面机电装备的远程监控,分析了有线工业以太网、传统无线通信方式及新型技术Zigbee等在煤矿井下应用的优缺点;提出基于无线Mesh技术研发本安型无线网络系统;构建了煤矿综采工作面机电设备的无线Mesh网络;阐述了其总体架构、节点的设计原则及其工作原理.在平煤股份二矿进行的工业性试验结果表明:根据工作面的长度和坡度,选择一定数量的无线Mesh交换机,以接收信号强度-85 dBm为临界点,调整Mesh交换机之间的距离,一般以任意2个

  13. Clinical effect of shallow suction applied in mechanical ventilation in premature infants%浅层吸痰在机械通气早产患儿中的应用

    Institute of Scientific and Technical Information of China (English)

    曾秋月; 谭芬养; 袁碧丹

    2015-01-01

    Objective:To explore the clinical effect of shallow suction applied in mechanical ventilation in premature infants,to provide true reference and basis for clinical nursing practice and research in preterm infants. Methods:60 patients with mechanical ventilation of premature infants were randomly divid-ed into experimental group and control group,the control group used the traditional deep sputum suction,while the experimental group used shallow suction. Compared the two sputum drainage methods of clinical the actual effect. Results:In experimental group suction oxygen saturation after 3min was significantly higher than the control group,vital signs (heart rate,respiration,blood pressure) compared with the control group,stable,sputum suction related complica-tions in irritability,vomiting,airway mucosal injury incidence was significantly lower than the control group,the difference has statistical significance (P <0. 05). Conclusion:Using shallow suction can effectively clean premature airway sputum,improve the blood oxygen saturation,reduce the impact on the vital signs,reduce phlegm suction related complications,improve the prognosis of the patients,has good clinical effect,especially suitable for the clinical applica-tion of mechanical ventilation in premature infants.%目的::探讨浅层吸痰在机械通气早产患儿中的应用效果,为早产儿临床研究提供真实的依据。方法:将2012年8月~2014年2月本院60例机械通气早产儿随机等分为试验组与对照组,对照组采用传统深层吸痰,试验组采用浅层吸痰,比较两种吸痰方法的临床效果。结果:试验组吸痰3 min 后患儿血氧饱和度较对照组升高,生命体征(心率、呼吸、血压)较对照组平稳,吸痰相关并发症中烦躁、呕吐、气道黏膜损伤的发生率低于对照组,差异具有统计学意义(P <0.05)。结论:采用浅层吸痰可有效清理早产儿的气道痰液,提高其血氧饱和度,减少

  14. Fracture Mechanics

    CERN Document Server

    Zehnder, Alan T

    2012-01-01

    Fracture mechanics is a vast and growing field. This book develops the basic elements needed for both fracture research and engineering practice. The emphasis is on continuum mechanics models for energy flows and crack-tip stress- and deformation fields in elastic and elastic-plastic materials. In addition to a brief discussion of computational fracture methods, the text includes practical sections on fracture criteria, fracture toughness testing, and methods for measuring stress intensity factors and energy release rates. Class-tested at Cornell, this book is designed for students, researchers and practitioners interested in understanding and contributing to a diverse and vital field of knowledge. Alan Zehnder joined the faculty at Cornell University in 1988. Since then he has served in a number of leadership roles including Chair of the Department of Theoretical and Applied Mechanics, and Director of the Sibley School of Mechanical and Aerospace Engineering.  He teaches applied mechanics and his research t...

  15. Applied analysis and differential equations

    CERN Document Server

    Cârj, Ovidiu

    2007-01-01

    This volume contains refereed research articles written by experts in the field of applied analysis, differential equations and related topics. Well-known leading mathematicians worldwide and prominent young scientists cover a diverse range of topics, including the most exciting recent developments. A broad range of topics of recent interest are treated: existence, uniqueness, viability, asymptotic stability, viscosity solutions, controllability and numerical analysis for ODE, PDE and stochastic equations. The scope of the book is wide, ranging from pure mathematics to various applied fields such as classical mechanics, biomedicine, and population dynamics.

  16. Comportamiento Mecánico de Grietas No Coplanares en Tubos Aplicando el Método de los Elementos Finitos/[title] [title language=en]Mechanical Behavior of Non-Coplanar Cracks in Pipes Applying the Finite Elements Method

    Directory of Open Access Journals (Sweden)

    A. Morales

    2004-01-01

    Full Text Available Se analizan grietas del tipo planar formadas a diferentes profundidades del espesor del tubo y que generalmente son causadas por el agrietamiento inducido por hidrógeno. Se modeló la interacción de grietas presurizadas contenidas en la pared del tubo con presión interna previas a su coalescencia, variando el radio de los defectos. Se aplicó el método de los elementos finitos en condiciones no lineales del material bajo la ley de endurecimiento isotrópico y considerando las propiedades del material (API 5L-X52. Los resultados indican la evolución de los campos de esfuerzos y deformaciones en el área de puntas de grieta en función de la presión del defecto. Defectos menores a 38.1 mm resisten una presión de 70 hasta 124 MPa, y mayores de 63.5 mm afectan severamente la integridad mecánica. La función de la presión critica que soportan grietas simétricas es de tipo potencial y esta presión produce la interacción que plastifica la región entre las grietas, previamente al escalonamientoPlanar-type cracks formed at different depths within tube walls, which are generally caused by hydrogen-induced cracking were analyzed. Modeling was carried out on the interaction of pressurized cracks contained within the tube wall with internal pressure prior to their coalescence, varying the radius of the defects. The finite elements method was applied under non-linear conditions of the material following the isotropic hardening law and considering the properties of the material (API 5L-X52. The results suggested the evolution of stress fields and deformations in the crack tips area as a function of the pressure of the defect. Defects of less than 38.1 mm resist a pressure of 70 to 124 MPa, and those larger than 63.5 mm severely affect the mechanical integrity. The function of the critical pressure supported by symmetrical cracks is of the potential type, and this pressure produces the interaction which plastifies the region among the cracks, prior

  17. Journal of applied mathematics

    National Research Council Canada - National Science Library

    2001-01-01

    "[The] Journal of Applied Mathematics is a refereed journal devoted to the publication of original research papers and review articles in all areas of applied, computational, and industrial mathematics...

  18. Transcription Against an Applied Force

    Science.gov (United States)

    Yin, Hong; Wang, Michelle D.; Svoboda, Karel; Landick, Robert; Block, Steven M.; Gelles, Jeff

    1995-12-01

    The force produced by a single molecule of Escherichia coli RNA polymerase during transcription was measured optically. Polymerase immobilized on a surface was used to transcribe a DNA template attached to a polystyrene bead 0.5 micrometer in diameter. The bead position was measured by interferometry while a force opposing translocation of the polymerase along the DNA was applied with an optical trap. At saturating nucleoside triphosphate concentrations, polymerase molecules stalled reversibly at a mean applied force estimated to be 14 piconewtons. This force is substantially larger than those measured for the cytoskeletal motors kinesin and myosin and exceeds mechanical loads that are estimated to oppose transcriptional elongation in vivo. The data are consistent with efficient conversion of the free energy liberated by RNA synthesis into mechanical work.

  19. Study of the main regulatory mechanisms to encourage renewable and alternative energy applied internationally and in Brazil; Estudo dos principais mecanismos regulatorios de incentivo as fontes renovaveis e alternativas de energia aplicados internacionalmente e no Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Martins, Juliana M.C.; Cavaliero, Carla Kazue Nakao [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Fac. de Engenharia Mecanica. Dept. de Energia], Emails: jumcm@fem.unicamp.br, cavaliero@fem.unicamp.br

    2009-07-01

    The investment in renewable and alternative energy sources has been stimulated by some countries in Europe and Americas through the introduction of encouragement regulatory mechanisms. This paper considers the most important international mechanisms such as Feed-in System, Tender System and Quota System with green certificates. In Brazil, there are three regulatory mechanisms in course: PROINFA, the 1. Tender of Renewable and 1. Tender Reserve. The carried out preliminary analysis made possible to classify PROINFA as a mechanism similar to Feed-in, while the auction of Renewable and Reserve are more like an auction system. This article points out the differences and similarities between the instruments and gives a preliminary analysis of their effectiveness, emphasizing national mechanisms, especially regarding the criteria for capacity increase and cost reduction of the technological bands, such as for biomass and small hydroelectric. (author)

  20. Non-destructive control applied on power station cables: assessment of the residual mechanical properties of cables; Controle non-destructif applique aux cables centrales: determination des caracteristiques mecaniques residuelles des cables

    Energy Technology Data Exchange (ETDEWEB)

    Bertrand, Y.; Pinel, B.; Brincourt, T.

    1996-12-31

    Cables in power plants are subjected to thermal and radiation stresses. As a result, these equipments have their electrical and mechanical properties modified versus time. In order to follow mechanical characteristics on site, we have tested a non destructive equipment named `INDENTER`. The experiments have been conducted on L.O.C.A. cables (EPR-CSPE) and PVC. Results obtained are satisfying for L.O.C.A. cables. For PVC cables, supplementary tests might be done in order to pronounce opinion in the interest of this equipment. we have observed chose relation between modulus INDENTER and classical mechanical data (absolute elongation at break). (authors).

  1. Perspectives on Applied Ethics

    OpenAIRE

    2007-01-01

    Applied ethics is a growing, interdisciplinary field dealing with ethical problems in different areas of society. It includes for instance social and political ethics, computer ethics, medical ethics, bioethics, envi-ronmental ethics, business ethics, and it also relates to different forms of professional ethics. From the perspective of ethics, applied ethics is a specialisation in one area of ethics. From the perspective of social practice applying eth-ics is to focus on ethical aspects and ...

  2. Applied Neuroscience Laboratory Complex

    Data.gov (United States)

    Federal Laboratory Consortium — Located at WPAFB, Ohio, the Applied Neuroscience lab researches and develops technologies to optimize Airmen individual and team performance across all AF domains....

  3. Vygotsky in applied neuropsychology

    National Research Council Canada - National Science Library

    Glozman, Janna M

    2016-01-01

    ...) to analyze the development of these theories in contemporary applied neuropsychology. An analysis of disturbances of mental functioning is impossible without a systemic approach to the evidence observed...

  4. Applied physics: The virtues of tiling

    Science.gov (United States)

    Fratzl, Peter

    2014-12-01

    A cracked metal film on an elastic substrate has been shown to provide ultrahigh sensitivity in detecting mechanical vibrations. The result draws inspiration from principles of tiling that apply to many biological systems. See Letter p.222

  5. What are applied ethics?

    Science.gov (United States)

    Allhoff, Fritz

    2011-03-01

    This paper explores the relationships that various applied ethics bear to each other, both in particular disciplines and more generally. The introductory section lays out the challenge of coming up with such an account and, drawing a parallel with the philosophy of science, offers that applied ethics may either be unified or disunified. The second section develops one simple account through which applied ethics are unified, vis-à-vis ethical theory. However, this is not taken to be a satisfying answer, for reasons explained. In the third section, specific applied ethics are explored: biomedical ethics; business ethics; environmental ethics; and neuroethics. These are chosen not to be comprehensive, but rather for their traditions or other illustrative purposes. The final section draws together the results of the preceding analysis and defends a disunity conception of applied ethics.

  6. Fluid mechanics

    CERN Document Server

    Kundu, Pijush K; Dowling, David R

    2011-01-01

    Fluid mechanics, the study of how fluids behave and interact under various forces and in various applied situations-whether in the liquid or gaseous state or both-is introduced and comprehensively covered in this widely adopted text. Revised and updated by Dr. David Dowling, Fluid Mechanics, 5e is suitable for both a first or second course in fluid mechanics at the graduate or advanced undergraduate level. Along with more than 100 new figures, the text has been reorganized and consolidated to provide a better flow and more cohesion of topics.Changes made to the

  7. Applied eye tracking research

    NARCIS (Netherlands)

    Jarodzka, Halszka

    2011-01-01

    Jarodzka, H. (2010, 12 November). Applied eye tracking research. Presentation and Labtour for Vereniging Gewone Leden in oprichting (VGL i.o.), Heerlen, The Netherlands: Open University of the Netherlands.

  8. Mesothelioma Applied Research Foundation

    Science.gov (United States)

    ... Percentage Donations Tribute Wall Other Giving/Fundraising Opportunities Bitcoin Donation Form FAQs Mesothelioma Awareness Day: Find out ... Percentage Donations Tribute Wall Other Giving/Fundraising Opportunities Bitcoin Donation Form FAQs © 2017 Mesothelioma Applied Research Foundation, ...

  9. Applied eye tracking research

    NARCIS (Netherlands)

    Jarodzka, Halszka

    2011-01-01

    Jarodzka, H. (2010, 12 November). Applied eye tracking research. Presentation and Labtour for Vereniging Gewone Leden in oprichting (VGL i.o.), Heerlen, The Netherlands: Open University of the Netherlands.

  10. Computer and Applied Ethics

    OpenAIRE

    越智, 貢

    2014-01-01

    With this essay I treat some problems raised by the new developments in science and technology, that is, those about Computer Ethics to show how and how far Applied Ethics differs from traditional ethics. I take up backgrounds on which Computer Ethics rests, particularly historical conditions of morality. Differences of conditions in time and space explain how Computer Ethics and Applied Ethics are not any traditional ethics in concrete cases. But I also investigate the normative rea...

  11. Applied gamma-ray spectrometry

    CERN Document Server

    Dams, R; Crouthamel, Carl E

    1970-01-01

    Applied Gamma-Ray Spectrometry covers real life application of the gamma-ray and the devices used in their experimental studies. This book is organized into 9 chapters, and starts with discussions of the various decay processes, the possible interaction mechanisms of gamma radiation with matter, and the intrinsic and extrinsic variables, which affect the observed gamma-ray and X-ray spectra. The subsequent chapters deal with the properties and fabrication of scintillation detectors, semiconductor detectors, and proportional gas counters. These chapters present some of the most widely utilized

  12. Selective attention mechanisms applied in attention deficit hyperactivity disorder / Mecanismos de atenção selectiva na perturbação de hiperactividade com déficit de atenção

    OpenAIRE

    Ramalho,Joaquim M. F.; M. Mar García-Señorán; Salvador G. González

    2009-01-01

    The attention deficit is the major factor of Attention Deficit Hyperactivity Disorder (ADHD). This paper aims to demonstrate difficulties in selective attention of subjects with ADHD as compared to subjects without ADHD, attempting to verify which mechanisms of selective attention are more affected in subjects with ADHD. For this purpose, we evaluated selective attention in subjects with and without ADHD (152 without and 31 with ADHD), in a population of 183 subjects. The general results show...

  13. Continuum mechanical and computational aspects of phase field elasticity as applied to phase transitions and fracture. Final report: DE-FG02-97ER25318, June 1, 1997 - May 31, 2000

    Energy Technology Data Exchange (ETDEWEB)

    Fried, Eliot; Gurtin, Morton E.

    2001-04-20

    The central focus of the research carried out under this grant is the application of continuum mechanics to materials science, specifically to the macroscopic characterization of material behavior at small length scales. Specifically, research was carried out in the following general areas: dislocations in solids; point defects in liquid crystals; dynamic fracture; diffusional phase transitions in deformable solids; incoherent phase interfaces; phase field simulations of twinning and coarsening in solids; crystal plasticity; microforce theories for diffusion and recrystallization; granular flow.

  14. 全椭圆齿轮行星系液态肥深施机构优化设计与试验%Optimization Design and Experiment of Liquid-fertilizer Applying Deep-fertilization Mechanism for Planetary Elliptic Gears

    Institute of Scientific and Technical Information of China (English)

    王金武; 刘亚华; 王金峰; 何剑南

    2012-01-01

    To satisfy the requirements of high working efficiency and smooth operation of liquid-fertilizer applicator, a kind of transmission mechanism with planetary elliptic gears was designed for deep-fertilization of liquid fertilizer. The analysis model of this mechanism was established. Its kinematic model was accomplished by means of theoretical derivation. Optimization design on the flow route of liquid fertilizer was conducted by employing the method of anti-twisting design of the mechanism. Finally, the mechanism was tested on the test-bed. After the data processing by using Design-Expert 6. 0. 1 software, the optimum working parameters were determined, which the working pressure of liquid pump is 0. 47 MPa, the rotating rate of planetary frame is 40 r/min, therefore, the fertilizer volume is 20 mL at a time, and fertilizer loss rate is 3. 2% . Observation from the test showed that, the mechanism ran smoothly with no interference, the liquid fertilizer transmitted smoothly characterized by reliable seal, which met the requirement of the design.%为满足液态施肥机工作过程中作业效率高、运转平稳的要求,设计了一种全椭圆齿轮传动的液态肥深施机构.建立了该机构运动学模型,通过理论推导对机构进行运动学分析.优化液态肥流动路线,对机构进行防缠绕设计.进行试验台试验,应用Design-Expert 6.0.1软件进行数据处理,确定了机构最佳工作参数为:液泵压力0.47 MPa、喷肥针孔直径3.0 mm和行星架转速40 r/min,此时施肥量20 mL/次,施肥损失率3.2%.试验表明该机构运转平稳、机构之间无干涉,液态肥流动管路密封可靠,液态肥输送顺畅.

  15. PSYCHOANALYSIS AS APPLIED AESTHETICS.

    Science.gov (United States)

    Richmond, Stephen H

    2016-07-01

    The question of how to place psychoanalysis in relation to science has been debated since the beginning of psychoanalysis and continues to this day. The author argues that psychoanalysis is best viewed as a form of applied art (also termed applied aesthetics) in parallel to medicine as applied science. This postulate draws on a functional definition of modernity as involving the differentiation of the value spheres of science, art, and religion. The validity criteria for each of the value spheres are discussed. Freud is examined, drawing on Habermas, and seen to have erred by claiming that the psychoanalytic method is a form of science. Implications for clinical and metapsychological issues in psychoanalysis are discussed.

  16. Applied Literature for Healing,

    Directory of Open Access Journals (Sweden)

    Susanna Marie Anderson

    2014-11-01

    Full Text Available In this qualitative research study interviews conducted with elite participants serve to reveal the underlying elements that unite the richly diverse emerging field of Applied Literature. The basic interpretative qualitative method included a thematic analysis of data from the interviews yielding numerous common elements that were then distilled into key themes that elucidated the beneficial effects of engaging consciously with literature. These themes included developing a stronger sense of self in balance with an increasing connection with community; providing a safe container to engage challenging and potentially overwhelming issues from a stance of empowered action; and fostering a healing space for creativity. The findings provide grounds for uniting the work being done in a range of helping professions into a cohesive field of Applied Literature, which offers effective tools for healing, transformation and empowerment. Keywords: Applied Literature, Bibliotherapy, Poetry Therapy, Arts in Corrections, Arts in Medicine

  17. 1st National Mechanics Congress

    CERN Document Server

    Nieuwstadt, F

    1990-01-01

    The Department of Applied Mechanics of the Royal Institution of Engineers in the Netherlands (Koninklijk Instituut van Ingenieurs) organised on April 2-4, 1990 the first National Applied Mechanics Congress about the theme: "Integration of Theory and Applications in Applied Mechanics" The idea behind this initiative was to bring together the Applied Mechanics communities in The Netherlands and Belgium and to create an environment in which new developments in the field could be discussed and in which connections to other disciplines could be established. Among an extensive list of possible subjects the following were selected as congress topics: - non-linear material behaviour, - chaos, - mechatronics, - liquid-solid interactions, - mathematics and applied mechanics, - integration of Applied Mechanics and other disciplines. Applied Mechanics comprises both solid mechanics and fluid mechanics. These can be subdivided further into: rheology, plasticity, theory of plates and shells, theory of elasticity, multibody...

  18. Applied Astronomy: Asteroid Prospecting

    Science.gov (United States)

    Elvis, M.

    2013-09-01

    In the age of asteroid mining the ability to find promising ore-bearing bodies will be valuable. This will give rise to a new discipline- "Applied Astronomy". Just as most geologists work in industry, not in academia, the same will be true of astronomers. Just how rare or common ore-rich asteroids are likely to be, and the skills needed to assay their value, are discussed here, with an emphasis on remote - telescopic - methods. Also considered are the resources needed to conduct extensive surveys of asteroids for prospecting purposes, and the cost and timescale involved. The longer-term need for applied astronomers is also covered.

  19. Retransmission Steganography Applied

    CERN Document Server

    Mazurczyk, Wojciech; Szczypiorski, Krzysztof

    2010-01-01

    This paper presents experimental results of the implementation of network steganography method called RSTEG (Retransmission Steganography). The main idea of RSTEG is to not acknowledge a successfully received packet to intentionally invoke retransmission. The retransmitted packet carries a steganogram instead of user data in the payload field. RSTEG can be applied to many network protocols that utilize retransmissions. We present experimental results for RSTEG applied to TCP (Transmission Control Protocol) as TCP is the most popular network protocol which ensures reliable data transfer. The main aim of the performed experiments was to estimate RSTEG steganographic bandwidth and detectability by observing its influence on the network retransmission level.

  20. Applied Electromagnetism and Materials

    CERN Document Server

    Moliton, André

    2007-01-01

    Applied Electromagnetism and Materials picks up where the author's Basic Electromagnetism and Materials left off by presenting practical and relevant technological information about electromagnetic material properties and their applications. This book is aimed at senior undergraduate and graduate students as well as researchers in materials science and is the product of many years of teaching basic and applied electromagnetism. Topics range from the spectroscopy and characterization of dielectrics and semiconductors, to non-linear effects and electromagnetic cavities, to ion-beam applications in materials science.

  1. Introduction to applied thermodynamics

    CERN Document Server

    Helsdon, R M; Walker, G E

    1965-01-01

    Introduction to Applied Thermodynamics is an introductory text on applied thermodynamics and covers topics ranging from energy and temperature to reversibility and entropy, the first and second laws of thermodynamics, and the properties of ideal gases. Standard air cycles and the thermodynamic properties of pure substances are also discussed, together with gas compressors, combustion, and psychrometry. This volume is comprised of 16 chapters and begins with an overview of the concept of energy as well as the macroscopic and molecular approaches to thermodynamics. The following chapters focus o

  2. On applying cognitive psychology.

    Science.gov (United States)

    Baddeley, Alan

    2013-11-01

    Recent attempts to assess the practical impact of scientific research prompted my own reflections on over 40 years worth of combining basic and applied cognitive psychology. Examples are drawn principally from the study of memory disorders, but also include applications to the assessment of attention, reading, and intelligence. The most striking conclusion concerns the many years it typically takes to go from an initial study, to the final practical outcome. Although the complexity and sheer timescale involved make external evaluation problematic, the combination of practical satisfaction and theoretical stimulation make the attempt to combine basic and applied research very rewarding.

  3. Applied functional analysis

    CERN Document Server

    Griffel, DH

    2002-01-01

    A stimulating introductory text, this volume examines many important applications of functional analysis to mechanics, fluid mechanics, diffusive growth, and approximation. Detailed enough to impart a thorough understanding, the text is also sufficiently straightforward for those unfamiliar with abstract analysis. Its four-part treatment begins with distribution theory and discussions of Green's functions. Essentially independent of the preceding material, the second and third parts deal with Banach spaces, Hilbert space, spectral theory, and variational techniques. The final part outlines the

  4. Selective attention mechanisms applied in attention deficit hyperactivity disorder / Mecanismos de atenção selectiva na perturbação de hiperactividade com déficit de atenção

    Directory of Open Access Journals (Sweden)

    Joaquim M. F. Ramalho

    2009-01-01

    Full Text Available The attention deficit is the major factor of Attention Deficit Hyperactivity Disorder (ADHD. This paper aims to demonstrate difficulties in selective attention of subjects with ADHD as compared to subjects without ADHD, attempting to verify which mechanisms of selective attention are more affected in subjects with ADHD. For this purpose, we evaluated selective attention in subjects with and without ADHD (152 without and 31 with ADHD, in a population of 183 subjects. The general results show that the subjects with ADHD present lower selective attention skills than the subjects without ADHD, specifically as far as rightness, errors, concentration and processed elements are concerned.

  5. Effect of SiO2 addition on photocatalytic activity, water contact angle and mechanical stability of visible light activated TiO2 thin films applied on stainless steel by a sol gel method

    Science.gov (United States)

    Momeni, Mansour; Saghafian, Hasan; Golestani-Fard, Farhad; Barati, Nastaran; Khanahmadi, Amirhossein

    2017-01-01

    Nanostructured N doped TiO2/20%SiO2 thin films were developed on steel surface via sol gel method using a painting airbrush. Thin films then were calcined at various temperatures in a range of 400-600 °C. The effect of SiO2 addition on phase composition and microstructural evolution of N doped TiO2 films were studied using XRD and FESEM. Optical properties, visible light photocatalytic activity, hydrophilic behavior, and mechanical behavior of the films were also investigated by DRS, methylene blue degradation, water contact angle measurements, and nanoscratch testing. Results indicated that the band gap energy of N doped TiO2/SiO2 was increased from 2.93 to 3.09 eV. Crack formation during calcination was also significantly promoted in the composite films. All composite films demonstrated weaker visible light photocatalytic activities and lower mechanical stability in comparison with N doped TiO2 films. Moreover, the N doped TiO2/SiO2 film calcined at 600 °C showed undesirable hydrophilic behavior with a water contact angle of 57° after 31 h of visible light irradiation. Outcomes of the present study reveal some different results to previous reports on TiO2/SiO2 films. In general, we believe the differences in substrate material as well as application in visible light are the main reasons for the above mentioned contradiction.

  6. Applied Statistics with SPSS

    Science.gov (United States)

    Huizingh, Eelko K. R. E.

    2007-01-01

    Accessibly written and easy to use, "Applied Statistics Using SPSS" is an all-in-one self-study guide to SPSS and do-it-yourself guide to statistics. What is unique about Eelko Huizingh's approach is that this book is based around the needs of undergraduate students embarking on their own research project, and its self-help style is designed to…

  7. Essays on Applied Microeconomics

    Science.gov (United States)

    Mejia Mantilla, Carolina

    2013-01-01

    Each chapter of this dissertation studies a different question within the field of Applied Microeconomics. The first chapter examines the mid- and long-term effects of the 1998 Asian Crisis on the educational attainment of Indonesian children ages 6 to 18, at the time of the crisis. The effects are identified as deviations from a linear trend for…

  8. Applied Statistics with SPSS

    Science.gov (United States)

    Huizingh, Eelko K. R. E.

    2007-01-01

    Accessibly written and easy to use, "Applied Statistics Using SPSS" is an all-in-one self-study guide to SPSS and do-it-yourself guide to statistics. What is unique about Eelko Huizingh's approach is that this book is based around the needs of undergraduate students embarking on their own research project, and its self-help style is designed to…

  9. Applying Literature to ELT

    Institute of Scientific and Technical Information of China (English)

    翟悦

    2007-01-01

    Literature is no longer a frightening word to English language learner. Interactive teaching methods and attractive activities can help motivating Chinese university English learners. This essay will first elaborate the reasons to use literature in ELT ( English Language Teaching) class and how to apply literature to ELT class.

  10. Applied Music (Individual Study).

    Science.gov (United States)

    Texas Education Agency, Austin.

    Background information and resources to help students in grades 9-12 in Texas pursue an individual study contract in applied music is presented. To fulfill a contract students must publicly perform from memory, with accompaniment as specified, three selections from a list of approved music for their chosen field (instrument or voice). Material…

  11. Africa and Applied Linguistics.

    Science.gov (United States)

    Makoni, Sinfree, Ed.; Meinhof, Ulrike H., Ed.

    2003-01-01

    This collection of articles includes: "Introducing Applied Linguistics in Africa" (Sinfree Makoni and Ulrike H. Meinhof); "Language Ideology and Politics: A Critical Appraisal of French as Second Official Language in Nigeria" (Tope Omoniyi); "The Democratisation of Indigenous Languages: The Case of Malawi" (Themba…

  12. Statistical mechanics

    CERN Document Server

    Davidson, Norman

    2003-01-01

    Clear and readable, this fine text assists students in achieving a grasp of the techniques and limitations of statistical mechanics. The treatment follows a logical progression from elementary to advanced theories, with careful attention to detail and mathematical development, and is sufficiently rigorous for introductory or intermediate graduate courses.Beginning with a study of the statistical mechanics of ideal gases and other systems of non-interacting particles, the text develops the theory in detail and applies it to the study of chemical equilibrium and the calculation of the thermody

  13. Proposta de um sistema de medição de desempenho aplicado à mecanização agrícola Proposal of a performance measuring system applied to agricultural mechanization

    Directory of Open Access Journals (Sweden)

    Paulo R. Peloia

    2010-08-01

    Full Text Available As organizações líderes dos mais diferentes setores têm como característica medir o próprio desempenho de modo sistêmico, porém nas empresas agrícolas ainda não é comum o emprego desse conceito, incluindo o setor de mecanização. A mecanização tem um forte impacto na composição dos custos de produção, e conhecer o seu desempenho é primordial para o sucesso de empresa agrícola. A importância que as medidas de desempenho têm no auxílio à gestão e o que a mecanização representa para os custos de produção justificaram o desenvolvimento deste trabalho, que tem como objetivo propor um sistema de medição de desempenho integrado para dar suporte à gestão da mecanização agrícola. A metodologia foi dividida em duas etapas: adaptação de um modelo conceitual sistêmico, com base no Balanced Scorecard - BSC; aplicação do modelo a um estudo de caso na agroindústria canavieira. A adaptação e a aplicação do modelo conceitual permitiu obter indicadores de desempenho de modo sistêmico e associados a: custo e prazo (tradicionalmente utilizados; controle e melhoria na qualidade de operações e processos de apoio; preservação ambiental; segurança, saúde, satisfação, motivação e capacitação de colaboradores; desenvolvimento de sistemas de informação. Conclui-se que o modelo auxiliou na elaboração do sistema de medição de desempenho para a gestão de sistemas mecanizados e que os indicadores permitem uma visão integrada da empresa e associada aos objetivos estratégicos.The leaders' organizations of several different sectors have as characteristic to measure their own performance in a systematic way. However, this concept is still unusual in agricultural enterprises, including the mechanization sector. Mechanization has an important role on the production costs and to know its performance is a key factor for the agricultural enterprise success. This work was generated by the importance that measurement of

  14. 校企协同培养应用型工程人才机制的构建与深化%The Construction and Optimization of the Training Applied-engineering Personnel Mechanism by University-enterprise Cooperation

    Institute of Scientific and Technical Information of China (English)

    孙秋柏

    2014-01-01

    The further innovation of the fostering mechanism of the application-oriented engineering talents requires careful understanding of the basic meaning of the university-enterprise collaboration . Presently there exist problems in university-enterprise collaborated fostering of talents such as the lack of governmental systems or regulations and of the weak consciousness of the university-enterprise collaboration . Therefore , it should be stressed that constant perfection of the relevant policies and laws and the increase of the consciousness of taking responsibilities during the application-oriented engineering talent-fostering mechanism. In addition ,it should be very necessary to set up the form of collaborative federations so as to share the benefits. Furthermore ,it should be stressed that all the businesses in the line take part in it so as to break the bottleneck ,and that the businesses initiatively serve the comunity so as to increase the collaborative attractive force.%进一步创新应用型工程人才培养机制需认真厘清校企协同的基本意涵。当前校企协同培养工程人才存在政府制度规范缺位、企业协同意识淡薄等问题。因此,在建立协同培养应用型工程人才机制过程中需要不断完善相关政策法规,提升责任意识;建立协同联邦,实现利益共赢;行业广泛参与,突破协同瓶颈;主动服务社会,提升协同引力。

  15. Enhanced thermal stability and mechanical properties of nitrogen deficient titanium aluminum nitride (Ti0.54Al0.46Ny) thin films by tuning the applied negative bias voltage

    Science.gov (United States)

    Calamba, K. M.; Schramm, I. C.; Johansson Jõesaar, M. P.; Ghanbaja, J.; Pierson, J. F.; Mücklich, F.; Odén, M.

    2017-08-01

    Aspects on the phase stability and mechanical properties of nitrogen deficient (Ti0.54Al0.46)Ny alloys were investigated. Solid solution alloys of (Ti,Al)N were grown by cathodic arc deposition. The kinetic energy of the impinging ions was altered by varying the substrate bias voltage from -30 V to -80 V. Films deposited with a high bias value of -80 V showed larger lattice parameter, finer columnar structure, and higher compressive residual stress resulting in higher hardness than films biased at -30 V when comparing their as-deposited states. At elevated temperatures, the presence of nitrogen vacancies and point defects (anti-sites and self-interstitials generated by the ion-bombardment during coating deposition) in (Ti0.54Al0.46)N0.87 influence the driving force for phase separation. Highly biased nitrogen deficient films have point defects with higher stability during annealing, which cause a delay of the release of the stored lattice strain energy and then accelerates the decomposition tendencies to thermodynamically stable c-TiN and w-AlN. Low biased nitrogen deficient films have retarded phase transformation to w-AlN, which results in the prolongment of age hardening effect up to 1100 °C, i.e., the highest reported temperature for Ti-Al-N material system. Our study points out the role of vacancies and point defects in engineering thin films with enhanced thermal stability and mechanical properties for high temperature hard coating applications.

  16. Applied Control Systems Design

    CERN Document Server

    Mahmoud, Magdi S

    2012-01-01

    Applied Control System Design examines several methods for building up systems models based on real experimental data from typical industrial processes and incorporating system identification techniques. The text takes a comparative approach to the models derived in this way judging their suitability for use in different systems and under different operational circumstances. A broad spectrum of control methods including various forms of filtering, feedback and feedforward control is applied to the models and the guidelines derived from the closed-loop responses are then composed into a concrete self-tested recipe to serve as a check-list for industrial engineers or control designers. System identification and control design are given equal weight in model derivation and testing to reflect their equality of importance in the proper design and optimization of high-performance control systems. Readers’ assimilation of the material discussed is assisted by the provision of problems and examples. Most of these e...

  17. Applied evaluative informetrics

    CERN Document Server

    Moed, Henk F

    2017-01-01

    This book focuses on applied evaluative informetric artifacts or topics. It explains the base notions and assumptions of evaluative informetrics by discussing a series of important applications. The structure of the book is therefore not organized by methodological characteristics, but is centered around popular, often discussed or used informetric artifacts - indicators, methodologies, products, databases - or so called hot topics in which informetric indicators play an important role. Most of the artifacts and topics emerged during the past decade. The principal aim of the book is to present a state of the art in applied evaluative informetrics, and to inform the readers about the pros and cons, potentialities and limitations of the use of informetric/bibliometric indicators in research assessment. The book is a continuation of the book Citation Analysis in Research Evaluation (Springer, 2005). It is of interest to non-specialists, especially research students at advanced master level and higher, all thos...

  18. Methods of applied mathematics

    CERN Document Server

    Hildebrand, Francis B

    1992-01-01

    This invaluable book offers engineers and physicists working knowledge of a number of mathematical facts and techniques not commonly treated in courses in advanced calculus, but nevertheless extremely useful when applied to typical problems in many different fields. It deals principally with linear algebraic equations, quadratic and Hermitian forms, operations with vectors and matrices, the calculus of variations, and the formulations and theory of linear integral equations. Annotated problems and exercises accompany each chapter.

  19. Applied longitudinal analysis

    CERN Document Server

    Fitzmaurice, Garrett M; Ware, James H

    2012-01-01

    Praise for the First Edition "". . . [this book] should be on the shelf of everyone interested in . . . longitudinal data analysis.""-Journal of the American Statistical Association   Features newly developed topics and applications of the analysis of longitudinal data Applied Longitudinal Analysis, Second Edition presents modern methods for analyzing data from longitudinal studies and now features the latest state-of-the-art techniques. The book emphasizes practical, rather than theoretical, aspects of methods for the analysis of diverse types of lo

  20. Applied Economics in Teaching

    Institute of Scientific and Technical Information of China (English)

    朱红萍

    2009-01-01

    This paper explains some plain phenomena in teaching and class management with an economic view. Some basic economic principles mentioned therein are: everything has its opportunity cost; the marginal utility of consumption of any kind is diminishing; Game theory is everywhere. By applying the economic theories to teaching, it is of great help for teachers to understand the students' behavior and thus improve the teaching effectiveness and efficiency.

  1. 应用型机械工程数字化实验室建设研究与实践%Research and Practice of Applied Digital Laboratory for Mechanical Engineering

    Institute of Scientific and Technical Information of China (English)

    李梦奇; 李冬英; 王斌

    2016-01-01

    That every aspect of enterprise production and marketing was integrated by computer and its application proposed new requirements for university graduates in information literacy.The digital experimental teaching is a possible solution for that. experimental teaching system of mechanical engineering professional exist the problems of incomplete system design,equipment island phenomenon,behind industrial demand and others.The paper proposed laboratory construction guiding ideology of system-atic,integrated,advanced,practical,and constructed mechanical engineering digital laboratory,experimental teaching system,and experimental projects with four compartments of digital platforms,digital information,digital information analysis,and information integration applications,and analysis the information teaching objectives of every experiment project,and proposed the construc-tion path of experiment laboratory and experiment project.That provides evidences for the laboratory construction and to improve the quality of personnel training.%计算机深入融合到现代企业生产和销售的每个环节,对高校本科毕业生的信息化素养提出了新的要求,数字化实验教学成为应对手段。针对机械工程专业存在实验教学系统设计不够、设备孤岛现象、落后工业需求等问题,提出“系统性、集成性、先进性、实用性”的实验室建设指导思想,分数字化平台、信息数字化、数字信息分析、信息集成应用4个分室建设机械工程数字化实验室、实验教学体系和实验项目,分析了各实验项目的信息教学目标,提出实验室建设和实验项目建设路径,为实验室建设和提高人才培养质量提供依据。

  2. Applied biotechnology in nematology.

    Science.gov (United States)

    Caswell-Chen, E P; Williamson, V M; Westerdahl, B B

    1993-12-01

    During the past two decades, rapid advances in biotechnology and molecular biology have affected the understanding and treatment of human and plant diseases. The human and Caenorhabditis elegans genome-sequencing projects promise further techniques and results useful to applied nematology. Of course, biotechnology is not a panacea for nematological problems, but it provides many powerful tools that have potential use in applied biology and nematode management. The tools will facilitate research on a range of previously intractable problems in nematology, from identification of species and pathotypes to the development of resistant cultivars that have been inaccessible because of technical limitations. However, to those unfamiliar or not directly involved with the new technologies and their extensive terminology, the benefits of the advances in biotechnology may not be readily discerned. The sustainable agriculture of the future will require ecology-based management, and successful integrated nematode management will depend on combinations of control tactics to reduce nematode numbers. In this review we discuss how biotechnology may influence nematode management, define terminology relative to potential applications, and present current and future avenues of research in applied nematology, including species identification, race and pathotype identification, development of resistant cultivars, definition of nematode-host interactions, nematode population dynamics, establishment of optimal rotations, the ecology of biological control and development of useful biological control agents, and the design of novel nematicides.

  3. 论税收滞纳金的法律性质、适用情形与核定机制%Study on the Legal Nature, Applied Rule and Determining Mechanism of Tax Overdue Fine

    Institute of Scientific and Technical Information of China (English)

    闫海; 于骁骁

    2011-01-01

    Tax overdue fine is one of the important measures of tax collection and management. The legal nature of the tax overdue fine should be define as an administrative enforcement penalty as well as the compensation for damages. Its applied rule not only should be considered the time dimension "over the prescribed time limit", but also be treated differentIy combining with main factors such as subjective fault, nature of action and the obligation body, Etc. The determining of tax overdue fine can be taken the section surcharge rate, and the differences in methods of payment should be considered when we determine the range of beginning and ending time. Also, it should set the tax exclusive periods during tax audit criminal investigation, administrative reconsideration and administrative litigation.%税收滞纳金是税收征收管理的重要措施之一。税收滞纳金的法律性质应界定为行政执行罚为主兼具损害赔偿。其适用情形不仅应考虑时间维度上的“未按照规定期限”。还应结合主观过错、行为性质及义务主体等因素予以区别对待。税收滞纳金的核定应采取分段加收率,起止时间应考虑支付方式的差异,并将税务稽查、刑事侦查及行政复议、行政诉讼设定为除外期间。

  4. 项目教学法在机械装配与维修专业中应用的研究%Applied Investigation of Project Teaching Approach in Speciality of Mechanical Assembly and Maintenance

    Institute of Scientific and Technical Information of China (English)

    夏继梅

    2011-01-01

    项目教学法是以建构主义理论为基础,通过选取"项目"来创设"情景",通过"协作学习"的方式开展学习,通过完成"项目"来达到"意义建构",是一种比较有效的教学方法.本文对在机械装配与维修专业中实施项目教学法进行了研究,并对整个教学方案进行了设计,为下一步实施项目教学奠定了理论基础.%Project teaching approach which is based on the theory of constructivism is a highly effective teaching method. The scenes created by choosing some projects, the learning through collaborative learning and the meaning constructions are achieved by accomplishing the projects. The study about project approach in speciality of mechanical assembly and maintenance was conducted, the teaching programs were designed for further implementation project teaching too.

  5. 古代壁画、彩绘显现剂应用机理和性能研究%Mechanism and performance of enhancement reagent applied to ancient Frescos and colored drawing

    Institute of Scientific and Technical Information of China (English)

    裴继芬; 李玉虎; 汪娟丽

    2012-01-01

    Rust- cleaning and enhancement reagents were applied to mural and colored drawings with calcified soils. After the treatment, the properties of the mixed film were tested. The optical properties of the gelatin film and enhancement reagent film were tested and their refractive indexes were recorded. The thickness and grain diameter of soil rust layer were measured. The durability and flexibility of the gelatin and the enhancement reagent films ap- plied to simulated mural paintings were also systematically compared. The results showed that the two films have a- bout the same refractive indexes and that when the soil rust layer is less than 120 μm thick, the soil particles on the top 70 μm can be recovered using the reinforcement reagent without interference with the paint layer. The reagent helps to restore mural painting's original appearance. Performance test of the painting was artificially aged. The data show good performance of the painting after aging.%针对粘结硬质、钙化土锈的壁画和彩绘在保护修复中使用的去除剂和显现加固剂复合应用后对其性能进行了研究测试。从光学角度对明胶膜和加样后膜折射率进行测试,对土锈剩余层粒径与厚度进行测试,又从耐久性、柔韧性等方面对两种试剂复合用的模拟壁画进行了系统评价。结果表明:两种膜的折射率几乎相同,当土锈剩余层粒径在120μm以内,厚度在70μm内的土粒都可以通过显现加固剂进行显现,恢复其古朴原貌,且不触及颜料层。复合应用后对模拟样板老化后性能测试,数据显示各方面性能良好。

  6. Simple Coal Refuse Storage and Stage Loading System Applied to Fully Mechanized Mine Gateway Driving Construction%简易储矸转载系统在综掘施工中的应用

    Institute of Scientific and Technical Information of China (English)

    贾剑; 王丽敏

    2014-01-01

    母杜柴登煤矿二期工程施工初期,在不具备后配套连续运输的条件下,布置简易储矸转载系统,解决了悬臂式掘进机快速掘进与电机车牵引矿车间断运输不匹配的技术难题,提高了巷道施工进度,取得了月进尺达180~235 m的好成绩。简易储矸转载系统除可与悬臂式掘进机配套使用外,还可与连采机、掘锚机等机掘设备配套使用,具有推广应用价值。%At an initial construction period of the second phase engineering of Mudu Chaideng Coal Mine ,under a condition with no back supporting continuous transportation ,a simple coal refuse stor‐age and stage loading system was arranged to solve a mismatching technical problem between the rapid driving of the mine boom type roadheader and the discontinuous transportation of the mine cars hauled by the mine electric locomotive. The mine gateway construction schedule was improved and a month driving rate reached an excellent achievement of 180~235m. T he simple coal refuse storage and stage loading system could not only be matched with boom type roadheader ,but also could be matched with the continuous miner ,driving an bolting machine and other mechanized equipment. The simple coal re‐fuse storage and stage loading system could have the promoted and application value.

  7. In situ quantification and evaluation of ClO(-)/H2S homeostasis in inflammatory gastric tissue by applying a rationally designed dual-response fluorescence probe featuring a novel H(+)-activated mechanism.

    Science.gov (United States)

    Fu, Qiang; Chen, Guang; Liu, Yuxia; Cao, Ziping; Zhao, Xianen; Li, Guoliang; Yu, Fabiao; Chen, Lingxin; Wang, Hua; You, Jinmao

    2017-05-02

    Homeostasis of ClO(-)/H2S plays a crucial role in the damage and repair of gastric tissue, but has rarely been investigated due to the challenge of in situ analysis in the highly acidic gastric environment. Herein, we designed a new H(+)-activated optical mechanism, involving controllable photoinduced electron transfer (PET) and switch of electron push-pull (SEPP), to develop the simple yet multifunctional probe (Z)-4-(2-benzylidenehydrazinyl)-7-nitrobenzo[c][1,2,5]oxadiazole (BNBD). First, the BNBD probe (Off) was protonated by the highly acidic media to trigger strong fluorescence (On). Then, the analytes ClO(-) and H2S reacted with the protonated BNBD, leading to ultrasensitive (ClO(-): 2.7 nM and H2S: 6.9 nM) fluorescence quenching via the rapid oxidation of C[double bond, length as m-dash]N (50 s) and nitro reduction (10 s), respectively. With the logical discrimination by absorbance/colour (ClO(-): 300 nm/colorless and H2S: 400 nm/orange), a strategy for the in situ quantification of ClO(-)/H2S in gastric mucosa and juice was developed. For the first time, the in situ quantitative monitoring of endogenous H2S and ClO(-)/H2S homeostasis as well as the pathologic manifestation in gastric mucosa were realized, thus overcoming the challenge of ClO(-)/H2S analysis under highly acidic conditions and enabling the in situ tissue quantification of ClO(-)/H2S. In combination with the assessment of mucosal damage, this study confirms the injurious/rehabilitative effects of ClO(-)/H2S on gastric mucosa (at 50-90 μm depth), which may facilitate the auxiliary diagnosis of stomach diseases induced by oxidative stress.

  8. Applied ALARA techniques

    Energy Technology Data Exchange (ETDEWEB)

    Waggoner, L.O.

    1998-02-05

    The presentation focuses on some of the time-proven and new technologies being used to accomplish radiological work. These techniques can be applied at nuclear facilities to reduce radiation doses and protect the environment. The last reactor plants and processing facilities were shutdown and Hanford was given a new mission to put the facilities in a safe condition, decontaminate, and prepare them for decommissioning. The skills that were necessary to operate these facilities were different than the skills needed today to clean up Hanford. Workers were not familiar with many of the tools, equipment, and materials needed to accomplish:the new mission, which includes clean up of contaminated areas in and around all the facilities, recovery of reactor fuel from spent fuel pools, and the removal of millions of gallons of highly radioactive waste from 177 underground tanks. In addition, this work has to be done with a reduced number of workers and a smaller budget. At Hanford, facilities contain a myriad of radioactive isotopes that are 2048 located inside plant systems, underground tanks, and the soil. As cleanup work at Hanford began, it became obvious early that in order to get workers to apply ALARA and use hew tools and equipment to accomplish the radiological work it was necessary to plan the work in advance and get radiological control and/or ALARA committee personnel involved early in the planning process. Emphasis was placed on applying,ALARA techniques to reduce dose, limit contamination spread and minimize the amount of radioactive waste generated. Progress on the cleanup has,b6en steady and Hanford workers have learned to use different types of engineered controls and ALARA techniques to perform radiological work. The purpose of this presentation is to share the lessons learned on how Hanford is accomplishing radiological work.

  9. Applied complex variables

    CERN Document Server

    Dettman, John W

    1965-01-01

    Analytic function theory is a traditional subject going back to Cauchy and Riemann in the 19th century. Once the exclusive province of advanced mathematics students, its applications have proven vital to today's physicists and engineers. In this highly regarded work, Professor John W. Dettman offers a clear, well-organized overview of the subject and various applications - making the often-perplexing study of analytic functions of complex variables more accessible to a wider audience. The first half of Applied Complex Variables, designed for sequential study, is a step-by-step treatment of fun

  10. Applied logistic regression

    CERN Document Server

    Hosmer, David W; Sturdivant, Rodney X

    2013-01-01

     A new edition of the definitive guide to logistic regression modeling for health science and other applications This thoroughly expanded Third Edition provides an easily accessible introduction to the logistic regression (LR) model and highlights the power of this model by examining the relationship between a dichotomous outcome and a set of covariables. Applied Logistic Regression, Third Edition emphasizes applications in the health sciences and handpicks topics that best suit the use of modern statistical software. The book provides readers with state-of-

  11. Applied impulsive mathematical models

    CERN Document Server

    Stamova, Ivanka

    2016-01-01

    Using the theory of impulsive differential equations, this book focuses on mathematical models which reflect current research in biology, population dynamics, neural networks and economics. The authors provide the basic background from the fundamental theory and give a systematic exposition of recent results related to the qualitative analysis of impulsive mathematical models. Consisting of six chapters, the book presents many applicable techniques, making them available in a single source easily accessible to researchers interested in mathematical models and their applications. Serving as a valuable reference, this text is addressed to a wide audience of professionals, including mathematicians, applied researchers and practitioners.

  12. Applied Semantic Web Technologies

    CERN Document Server

    Sugumaran, Vijayan

    2011-01-01

    The rapid advancement of semantic web technologies, along with the fact that they are at various levels of maturity, has left many practitioners confused about the current state of these technologies. Focusing on the most mature technologies, Applied Semantic Web Technologies integrates theory with case studies to illustrate the history, current state, and future direction of the semantic web. It maintains an emphasis on real-world applications and examines the technical and practical issues related to the use of semantic technologies in intelligent information management. The book starts with

  13. Applied linear regression

    CERN Document Server

    Weisberg, Sanford

    2013-01-01

    Praise for the Third Edition ""...this is an excellent book which could easily be used as a course text...""-International Statistical Institute The Fourth Edition of Applied Linear Regression provides a thorough update of the basic theory and methodology of linear regression modeling. Demonstrating the practical applications of linear regression analysis techniques, the Fourth Edition uses interesting, real-world exercises and examples. Stressing central concepts such as model building, understanding parameters, assessing fit and reliability, and drawing conclusions, the new edition illus

  14. Applying Popper's Probability

    CERN Document Server

    Whiting, Alan B

    2014-01-01

    Professor Sir Karl Popper (1902-1994) was one of the most influential philosophers of science of the twentieth century, best known for his doctrine of falsifiability. His axiomatic formulation of probability, however, is unknown to current scientists, though it is championed by several current philosophers of science as superior to the familiar version. Applying his system to problems identified by himself and his supporters, it is shown that it does not have some features he intended and does not solve the problems they have identified.

  15. Applied energy an introduction

    CERN Document Server

    Abdullah, Mohammad Omar

    2012-01-01

    Introduction to Applied EnergyGeneral IntroductionEnergy and Power BasicsEnergy EquationEnergy Generation SystemsEnergy Storage and MethodsEnergy Efficiencies and LossesEnergy industry and Energy Applications in Small -Medium Enterprises (SME) industriesEnergy IndustryEnergy-Intensive industryEnergy Applications in SME Energy industriesEnergy Sources and SupplyEnergy SourcesEnergy Supply and Energy DemandEnergy Flow Visualization and Sankey DiagramEnergy Management and AnalysisEnergy AuditsEnergy Use and Fuel Consumption StudyEnergy Life-Cycle AnalysisEnergy and EnvironmentEnergy Pollutants, S

  16. Applied linear regression

    CERN Document Server

    Weisberg, Sanford

    2005-01-01

    Master linear regression techniques with a new edition of a classic text Reviews of the Second Edition: ""I found it enjoyable reading and so full of interesting material that even the well-informed reader will probably find something new . . . a necessity for all of those who do linear regression."" -Technometrics, February 1987 ""Overall, I feel that the book is a valuable addition to the now considerable list of texts on applied linear regression. It should be a strong contender as the leading text for a first serious course in regression analysis."" -American Scientist, May-June 1987

  17. SIFT applied to CBIR

    Directory of Open Access Journals (Sweden)

    ALMEIDA, J.

    2009-12-01

    Full Text Available Content-Based Image Retrieval (CBIR is a challenging task. Common approaches use only low-level features. Notwithstanding, such CBIR solutions fail on capturing some local features representing the details and nuances of scenes. Many techniques in image processing and computer vision can capture these scene semantics. Among them, the Scale Invariant Features Transform~(SIFT has been widely used in a lot of applications. This approach relies on the choice of several parameters which directly impact its effectiveness when applied to retrieve images. In this paper, we discuss the results obtained in several experiments proposed to evaluate the application of the SIFT in CBIR tasks.

  18. Applied Physics Letters

    OpenAIRE

    Dong, Shuxiang; Bai, Feiming; Li, Jiefang; Viehland, Dwight D.

    2003-01-01

    An acoustic position sensor, based on a piezoelectric-sound-resonance cavity (PSRC), is reported in which a resonance acoustic field is used as the sensing mechanism. It has been discovered that an inserted object or an object motion in the sound radiation field results in changes in the resonance state of the PSRC. Experiments have demonstrated a high position resolution in the axial direction, and also good sensitivity in the transverse. (C) 2003 American Institute of Physics.

  19. Research on mechanical compression heat pump applying to petroleum and chemical enterprise%机械压缩式热泵在石化企业的应用研究

    Institute of Scientific and Technical Information of China (English)

    韩莉; 司继林; 项曙光

    2013-01-01

    Mechanical compression heat pump was simulated by a chemical process simulation software-Aspen Plus, and the temperature rise, superheating and supercooling degree, selection of working medium and the application of multistage pump were studied.The research results show that, the maximum temperature of single stage compression heat pump is 45 ℃. The optimal degree of superheat is 5 ℃. the optimum working fluid is R152a when the condensing temperature arranges from 60 ℃ to 80 ℃, while the comprehensive properties of R143 or R123 is the best when the temperature range is from 80 to 110 or 110 to 160, respectively. The comprehensive performance of cascade heat pump is better than other forms of multistage pump. The maximum temperature rise of multistage pump is limited by working fluids. Currently, the maximum temperature rise is up to 115 ℃.%应用化工流程模拟软件Aspen Plus对机械压缩式热泵进行模拟,并且对机械压缩式热泵温升、过热和过冷度、工质选取以及多级热泵的应用进行研究。研究结果表明:单级压缩式热泵的最大温升为45℃;最佳过热度为2℃,最佳过冷度为5℃;冷凝温度在60℃~80℃范围内最佳工质为R152 a,在80℃~110℃温度区间内R143综合性能最优,在110℃~160℃温度区间内 R123最优;复叠式热泵综合性能优于其它形式多级热泵;多级热泵的最大温升受工质的限制,在目前的工质范围内,最大温升可达115℃。

  20. Applied Impact Physics Research

    Science.gov (United States)

    Wickert, Matthias

    2013-06-01

    Applied impact physics research is based on the capability to examine impact processes for a wide range of impact conditions with respect to velocity as well as mass and shape of the projectile. For this reason, Fraunhofer EMI operates a large variety of launchers that address velocities up to ordnance velocities as single stage powder gun but which can also be operated as two-stage light gas guns achieving the regime of low earth orbital velocity. Thereby for projectile masses of up to 100 g hypervelocity impact phenomena up to 7.8 km/s can be addressed. Advanced optical diagnostic techniques like microsecond video are used as commercial systems but - since impact phenomena are mostly related with debris or dust - specialized diagnostics are developed in-house like x-ray cinematography and x-ray tomography. Selected topics of the field of applied impact physics will be presented like the interesting behavior of long rods penetrating low-density materials or experimental findings at hypervelocity for this class of materials as well as new x-ray diagnositic techniques.

  1. 采用输入输出分解的分区分段演化机制%In-partition in-stage evolutionary mechanism by applying input and output decomposition

    Institute of Scientific and Technical Information of China (English)

    姚睿; 陈芹芹; 孙艳梅; 张砦; 王友仁

    2015-01-01

    针对演化硬件的可扩展性问题,提出了基于输入输出分解的分区分段并行在线演化机制,用于演化组合逻辑电路。依据输入输出分解策略,将原电路分解为多个具有较少输入、输出的子电路,并对各子电路单独分配进化区域,实现各子电路的并行演化;某些子电路演化完毕,其对应进化区域即可用于其他任何未演化完毕子电路的并行演化;所有子电路均演化成功后,将其进行整合得到顶层电路。在Xilinx Virtex-5 FX构建的自演化系统上,以加法器电路、乘法器电路和部分MCNC基准电路为例进行了验证。结果表明:相对于经典演化方法,该方法可以大大减少演化时间,进化出多达21个输入的组合电路。%To solve the problem of scalability of evolvable hardware, an in-partition in-stage parallel online evolution mechanism based on input and output decomposition is presented for evolving combinational logic circuit.According to the input and output decomposition strategy, the original combinational logic circuit is divided into several sub-circuits with fewer inputs and outputs.Each sub-circuit is assigned to a separate evolution area.This is constructed to realize the parallel evolution of sub-circuits.When the evolutions of some sub-circuits are completed, the corre-sponding areas of evolution can be used for the parallel evolution of any other sub-circuits with uncompleted evolu-tion.After the evolution on all sub-circuits are successfully completed they are integrated into a top circuit.In the self-evolving system built by Xilinx Virtex-5 FX, the adder circuit, multiplier circuit and partial MCNC benchmark circuits are taken as the examples for demonstration.The experimental results showed that compared to the classical evolutionary method, this method may greatly reduce the evolution time and evolve a combinational logic circuit with 21 inputs at most.

  2. Quantum Mechanics

    Science.gov (United States)

    Mandl, F.

    1992-07-01

    The Manchester Physics Series General Editors: D. J. Sandiford; F. Mandl; A. C. Phillips Department of Physics and Astronomy, University of Manchester Properties of Matter B. H. Flowers and E. Mendoza Optics Second Edition F. G. Smith and J. H. Thomson Statistical Physics Second Edition F. Mandl Electromagnetism Second Edition I. S. Grant and W. R. Phillips Statistics R. J. Barlow Solid State Physics Second Edition J. R. Hook and H. E. Hall Quantum Mechanics F. Mandl Particle Physics Second Edition B. R. Martin and G. Shaw The Physics of Stars Second Edition A. C. Phillips Computing for Scientists R. J. Barlow and A. R. Barnett Quantum Mechanics aims to teach those parts of the subject which every physicist should know. The object is to display the inherent structure of quantum mechanics, concentrating on general principles and on methods of wide applicability without taking them to their full generality. This book will equip students to follow quantum-mechanical arguments in books and scientific papers, and to cope with simple cases. To bring the subject to life, the theory is applied to the all-important field of atomic physics. No prior knowledge of quantum mechanics is assumed. However, it would help most readers to have met some elementary wave mechanics before. Primarily written for students, it should also be of interest to experimental research workers who require a good grasp of quantum mechanics without the full formalism needed by the professional theorist. Quantum Mechanics features: A flow diagram allowing topics to be studied in different orders or omitted altogether. Optional "starred" and highlighted sections containing more advanced and specialized material for the more ambitious reader. Sets of problems at the end of each chapter to help student understanding. Hints and solutions to the problems are given at the end of the book.

  3. Applied partial differential equations

    CERN Document Server

    Logan, J David

    2015-01-01

    This text presents the standard material usually covered in a one-semester, undergraduate course on boundary value problems and PDEs.  Emphasis is placed on motivation, concepts, methods, and interpretation, rather than on formal theory. The concise treatment of the subject is maintained in this third edition covering all the major ideas: the wave equation, the diffusion equation, the Laplace equation, and the advection equation on bounded and unbounded domains. Methods include eigenfunction expansions, integral transforms, and characteristics. In this third edition, text remains intimately tied to applications in heat transfer, wave motion, biological systems, and a variety other topics in pure and applied science. The text offers flexibility to instructors who, for example, may wish to insert topics from biology or numerical methods at any time in the course. The exposition is presented in a friendly, easy-to-read, style, with mathematical ideas motivated from physical problems. Many exercises and worked e...

  4. Applied number theory

    CERN Document Server

    Niederreiter, Harald

    2015-01-01

    This textbook effectively builds a bridge from basic number theory to recent advances in applied number theory. It presents the first unified account of the four major areas of application where number theory plays a fundamental role, namely cryptography, coding theory, quasi-Monte Carlo methods, and pseudorandom number generation, allowing the authors to delineate the manifold links and interrelations between these areas.  Number theory, which Carl-Friedrich Gauss famously dubbed the queen of mathematics, has always been considered a very beautiful field of mathematics, producing lovely results and elegant proofs. While only very few real-life applications were known in the past, today number theory can be found in everyday life: in supermarket bar code scanners, in our cars’ GPS systems, in online banking, etc.  Starting with a brief introductory course on number theory in Chapter 1, which makes the book more accessible for undergraduates, the authors describe the four main application areas in Chapters...

  5. Applied multivariate statistical analysis

    CERN Document Server

    Härdle, Wolfgang Karl

    2015-01-01

    Focusing on high-dimensional applications, this 4th edition presents the tools and concepts used in multivariate data analysis in a style that is also accessible for non-mathematicians and practitioners.  It surveys the basic principles and emphasizes both exploratory and inferential statistics; a new chapter on Variable Selection (Lasso, SCAD and Elastic Net) has also been added.  All chapters include practical exercises that highlight applications in different multivariate data analysis fields: in quantitative financial studies, where the joint dynamics of assets are observed; in medicine, where recorded observations of subjects in different locations form the basis for reliable diagnoses and medication; and in quantitative marketing, where consumers’ preferences are collected in order to construct models of consumer behavior.  All of these examples involve high to ultra-high dimensions and represent a number of major fields in big data analysis. The fourth edition of this book on Applied Multivariate ...

  6. Applied systems theory

    CERN Document Server

    Dekkers, Rob

    2017-01-01

    Offering an up-to-date account of systems theories and its applications, this book provides a different way of resolving problems and addressing challenges in a swift and practical way, without losing overview and grip on the details. From this perspective, it offers a different way of thinking in order to incorporate different perspectives and to consider multiple aspects of any given problem. Drawing examples from a wide range of disciplines, it also presents worked cases to illustrate the principles. The multidisciplinary perspective and the formal approach to modelling of systems and processes of ‘Applied Systems Theory’ makes it suitable for managers, engineers, students, researchers, academics and professionals from a wide range of disciplines; they can use this ‘toolbox’ for describing, analysing and designing biological, engineering and organisational systems as well as getting a better understanding of societal problems. This revised, updated and expanded second edition includes coverage of a...

  7. Defining Game Mechanics

    DEFF Research Database (Denmark)

    Sicart (Vila), Miguel Angel

    2008-01-01

    This article defins game mechanics in relation to rules and challenges. Game mechanics are methods invoked by agents for interacting with the game world. I apply this definition to a comparative analysis of the games Rez, Every Extend Extra and Shadow of the Colossus that will show the relevance...... of a formal definition of game mechanics. Udgivelsesdato: Dec 2008...

  8. Defining Game Mechanics

    DEFF Research Database (Denmark)

    Sicart (Vila), Miguel Angel

    2008-01-01

    This article defins game mechanics in relation to rules and challenges. Game mechanics are methods invoked by agents for interacting with the game world. I apply this definition to a comparative analysis of the games Rez, Every Extend Extra and Shadow of the Colossus that will show the relevance...... of a formal definition of game mechanics. Udgivelsesdato: Dec 2008...

  9. Self-Healing Nanocomposites for Reusable Composite Cryotanks

    Science.gov (United States)

    Eberly, Daniel; Ou, Runqing; Karcz, Adam; Skandan, Ganesh

    2013-01-01

    nanoparticle additives. Unique nanoparticles were used that have been surface-functionalized to be compatible with the resin. Both organic and inorganic components toughen the matrix and result in a more impact-resistant COPV. In one resin system containing an inorganic nanomaterial additive, a significant improvement in burst performance was observed after the COPV was cryo-impact-damaged and then self-healed, with a greater than 10% improvement in burst pressure after the self-healing process was performed. Initial cross-sectional analysis via microscopy showed good resin infiltration of the carbon fibers and without voids. To further enhance the capability between the nanomaterial additives and the resin, a surface modification was successfully performed. A second specialty epoxy resin was prepared using a surface modified nanomaterial additive, and COPVs were fabricated. Steps were taken to improve the mechanical properties of the COPVs by using a low-viscosity resin system that contained a different curing agent. This lower viscosity improves the processing of the COPV, and preliminary results show that the burst pressure of these new vessels is 20 to 25% higher than that of the original. The self-healing concept demonstrated in this research and development effort represents a platform technology, and the self-healing property is neither restricted to the particular epoxy system used here, nor to the COPV application. Self-healing is a direct result of a unique phase separated morphology created via the resin and is aided by the nanoparticles. The self-healing function can be introduced to other customer-specific resin systems in coating, bulk, or composite applications provided that the unique phase separated morphology can be enabled in those systems.

  10. Visualisation in Applied Learning Contexts: A Review

    Science.gov (United States)

    Twissell, Adrian

    2014-01-01

    This literature review explores visualisation within the context of learning in design, engineering and technology education. The investigation first defines visualisation, providing examples of activities that utilise visualisation skills within an applied field. Then exploration of the mental mechanisms of visualisation used to engage with those…

  11. Applying incentive sensitization models to behavioral addiction

    DEFF Research Database (Denmark)

    Rømer Thomsen, Kristine; Fjorback, Lone; Møller, Arne

    2014-01-01

    The incentive sensitization theory is a promising model for understanding the mechanisms underlying drug addiction, and has received support in animal and human studies. So far the theory has not been applied to the case of behavioral addictions like Gambling Disorder, despite sharing clinical...

  12. Applied electromagnetic scattering theory

    CERN Document Server

    Osipov, Andrey A

    2017-01-01

    Besides classical applications (radar and stealth, antennas, microwave engineering), scattering and diffraction are enabling phenomena for some emerging research fields (artificial electromagnetic materials or metamaterials, terahertz technologies, electromagnetic aspects of nano-science). This book is a tutorial for advanced students who need to study diffraction theory. The textbook gives fundamental knowledge about scattering and diffraction of electromagnetic waves and provides some working examples of solutions for practical high-frequency scattering and diffraction problems. The book focuses on the most important diffraction effects and mechanisms influencing the scattering process and describes efficient and physically justified simulation methods - physical optics (PO) and the physical theory of diffraction (PTD) - applicable in typical remote sensing scenarios. The material is presented in a comprehensible and logical form, which relates the presented results to the basic principles of electromag...

  13. Applied Linguistics and the "Annual Review of Applied Linguistics."

    Science.gov (United States)

    Kaplan, Robert B.; Grabe, William

    2000-01-01

    Examines the complexities and differences involved in granting disciplinary status to the role of applied linguistics, discusses the role of the "Annual Review of Applied Linguistics" as a contributor to the development of applied linguistics, and highlights a set of publications for the future of applied linguistics. (Author/VWL)

  14. Applying evolutionary anthropology.

    Science.gov (United States)

    Gibson, Mhairi A; Lawson, David W

    2015-01-01

    Evolutionary anthropology provides a powerful theoretical framework for understanding how both current environments and legacies of past selection shape human behavioral diversity. This integrative and pluralistic field, combining ethnographic, demographic, and sociological methods, has provided new insights into the ultimate forces and proximate pathways that guide human adaptation and variation. Here, we present the argument that evolutionary anthropological studies of human behavior also hold great, largely untapped, potential to guide the design, implementation, and evaluation of social and public health policy. Focusing on the key anthropological themes of reproduction, production, and distribution we highlight classic and recent research demonstrating the value of an evolutionary perspective to improving human well-being. The challenge now comes in transforming relevance into action and, for that, evolutionary behavioral anthropologists will need to forge deeper connections with other applied social scientists and policy-makers. We are hopeful that these developments are underway and that, with the current tide of enthusiasm for evidence-based approaches to policy, evolutionary anthropology is well positioned to make a strong contribution. © 2015 Wiley Periodicals, Inc.

  15. Applied hydraulic transients

    CERN Document Server

    Chaudhry, M Hanif

    2014-01-01

    This book covers hydraulic transients in a comprehensive and systematic manner from introduction to advanced level and presents various methods of analysis for computer solution. The field of application of the book is very broad and diverse and covers areas such as hydroelectric projects, pumped storage schemes, water-supply systems, cooling-water systems, oil pipelines and industrial piping systems. Strong emphasis is given to practical applications, including several case studies, problems of applied nature, and design criteria. This will help design engineers and introduce students to real-life projects. This book also: ·         Presents modern methods of analysis suitable for computer analysis, such as the method of characteristics, explicit and implicit finite-difference methods and matrix methods ·         Includes case studies of actual projects ·         Provides extensive and complete treatment of governed hydraulic turbines ·         Presents design charts, desi...

  16. Academic training: Applied superconductivity

    CERN Multimedia

    2007-01-01

    LECTURE SERIES 17, 18, 19 January from 11.00 to 12.00 hrs Council Room, Bldg 503 Applied Superconductivity : Theory, superconducting Materials and applications E. PALMIERI/INFN, Padova, Italy When hearing about persistent currents recirculating for several years in a superconducting loop without any appreciable decay, one realizes that we are dealing with a phenomenon which in nature is the closest known to the perpetual motion. Zero resistivity and perfect diamagnetism in Mercury at 4.2 K, the breakthrough during 75 years of several hundreds of superconducting materials, the revolution of the "liquid Nitrogen superconductivity"; the discovery of still a binary compound becoming superconducting at 40 K and the subsequent re-exploration of the already known superconducting materials: Nature discloses drop by drop its intimate secrets and nobody can exclude that the last final surprise must still come. After an overview of phenomenology and basic theory of superconductivity, the lectures for this a...

  17. Applied large eddy simulation.

    Science.gov (United States)

    Tucker, Paul G; Lardeau, Sylvain

    2009-07-28

    Large eddy simulation (LES) is now seen more and more as a viable alternative to current industrial practice, usually based on problem-specific Reynolds-averaged Navier-Stokes (RANS) methods. Access to detailed flow physics is attractive to industry, especially in an environment in which computer modelling is bound to play an ever increasing role. However, the improvement in accuracy and flow detail has substantial cost. This has so far prevented wider industrial use of LES. The purpose of the applied LES discussion meeting was to address questions regarding what is achievable and what is not, given the current technology and knowledge, for an industrial practitioner who is interested in using LES. The use of LES was explored in an application-centred context between diverse fields. The general flow-governing equation form was explored along with various LES models. The errors occurring in LES were analysed. Also, the hybridization of RANS and LES was considered. The importance of modelling relative to boundary conditions, problem definition and other more mundane aspects were examined. It was to an extent concluded that for LES to make most rapid industrial impact, pragmatic hybrid use of LES, implicit LES and RANS elements will probably be needed. Added to this further, highly industrial sector model parametrizations will be required with clear thought on the key target design parameter(s). The combination of good numerical modelling expertise, a sound understanding of turbulence, along with artistry, pragmatism and the use of recent developments in computer science should dramatically add impetus to the industrial uptake of LES. In the light of the numerous technical challenges that remain it appears that for some time to come LES will have echoes of the high levels of technical knowledge required for safe use of RANS but with much greater fidelity.

  18. Essays in applied microeconomics

    Science.gov (United States)

    Wang, Xiaoting

    In this dissertation I use Microeconomic theory to study firms' behavior. Chapter One introduces the motivations and main findings of this dissertation. Chapter Two studies the issue of information provision through advertisement when markets are segmented and consumers' price information is incomplete. Firms compete in prices and advertising strategies for consumers with transportation costs. High advertising costs contribute to market segmentation. Low advertising costs promote price competition among firms and improves consumer welfare. Chapter Three also investigates market power as a result of consumers' switching costs. A potential entrant can offer a new product bundled with an existing product to compensate consumers for their switching cost. If the primary market is competitive, bundling simply plays the role of price discrimination, and it does not dominate unbundled sales in the process of entry. If the entrant has market power in the primary market, then bundling also plays the role of leveraging market power and it dominates unbundled sales. The market for electric power generation has been opened to competition in recent years. Chapter Four looks at issues involved in the deregulated electricity market. By comparing the performance of the competitive market with the social optimum, we identify the conditions under which market equilibrium generates socially efficient levels of electric power. Chapter Two to Four investigate the strategic behavior among firms. Chapter Five studies the interaction between firms and unemployed workers in a frictional labor market. We set up an asymmetric job auction model, where two types of workers apply for two types of job openings by bidding in auctions and firms hire the applicant offering them the most profits. The job auction model internalizes the determination of the share of surplus from a match, therefore endogenously generates incentives for an efficient division of the matching surplus. Microeconomic

  19. Vygotsky in applied neuropsychology

    Directory of Open Access Journals (Sweden)

    Glozman J. M.

    2016-12-01

    Full Text Available The aims of this paper are: 1 to show the role of clinical experience for the theoretical contributions of L.S. Vygotsky, and 2 to analyze the development of these theories in contemporary applied neuropsychology. An analysis of disturbances of mental functioning is impossible without a systemic approach to the evidence observed. Therefore, medical psychology is fundamental for forming a systemic approach to psychology. The assessment of neurological patients at the neurological hospital of Moscow University permitted L.S. Vygotsky to create, in collaboration with A.R. Luria, the theory of systemic dynamic localization of higher mental functions and their relationship to cultural conditions. In his studies of patients with Parkinson’s disease, Vygotsky also set out 3 steps of systemic development: interpsychological, then extrapsychological, then intrapsychological. L.S. Vygotsky and A.R. Luria in the late 1920s created a program to compensate for the motor subcortical disturbances in Parkinson’s disease (PD through a cortical (visual mediation of movements. We propose to distinguish the objective mediating factors — like teaching techniques and modalities — from subjective mediating factors, like the individual’s internal representation of his/her own disease. The cultural-historical approach in contemporary neuropsychology forces neuropsychologists to re-analyze and re-interpret the classic neuropsychological syndromes; to develop new assessment procedures more in accordance with the patient’s conditions of life; and to reconsider the concept of the social brain as a social and cultural determinant and regulator of brain functioning. L.S. Vygotsky and A.R. Luria proved that a defect interferes with a child’s appropriation of his/her culture, but cultural means can help the child overcome the defect. In this way, the cultural-historical approach became, and still is, a methodological basis for remedial education.

  20. Applied Historical Astronomy

    Science.gov (United States)

    Stephenson, F. Richard

    2014-01-01

    F. Richard Stephenson has spent most of his research career -- spanning more than 45 years -- studying various aspects of Applied Historical Astronomy. The aim of this interdisciplinary subject is the application of historical astronomical records to the investigation of problems in modern astronomy and geophysics. Stephenson has almost exclusively concentrated on pre-telescopic records, especially those preserved from ancient and medieval times -- the earliest reliable observations dating from around 700 BC. The records which have mainly interested him are of eclipses (both solar and lunar), supernovae, sunspots and aurorae, and Halley's Comet. The main sources of early astronomical data are fourfold: records from ancient and medieval East Asia (China, together with Korea and Japan); ancient Babylon; ancient and medieval Europe; and the medieval Arab world. A feature of Stephenson's research is the direct consultation of early astronomical texts in their original language -- either working unaided or with the help of colleagues. He has also developed a variety of techniques to help interpret the various observations. Most pre-telescopic observations are very crude by present-day standards. In addition, early motives for skywatching were more often astrological rather than scientific. Despite these drawbacks, ancient and medieval astronomical records have two remarkable advantages over modern data. Firstly, they can enable the investigation of long-term trends (e.g. in the terrestrial rate of rotation), which in the relatively short period covered by telescopic observations are obscured by short-term fluctuations. Secondly, over the lengthy time-scale which they cover, significant numbers of very rare events (such as Galactic supernovae) were reported, which have few -- if any-- counterparts in the telescopic record. In his various researches, Stephenson has mainly focused his attention on two specific topics. These are: (i) long-term changes in the Earth's rate of

  1. Applying Parametric Fault Detection to a Mechanical System

    DEFF Research Database (Denmark)

    Felício, P.; Stoustrup, Jakob; Niemann, H.

    2002-01-01

    A way of doing parametric fault detection is described. It is based on the representation of parameter changes as linear fractional transformations (lfts). We describe a model with parametric uncertainty. Then a stabilizing controller is chosen and its robustness properties are studied via mu...

  2. Personal Computer (PC) based image processing applied to fluid mechanics

    Science.gov (United States)

    Cho, Y.-C.; Mclachlan, B. G.

    1987-01-01

    A PC based image processing system was employed to determine the instantaneous velocity field of a two-dimensional unsteady flow. The flow was visualized using a suspension of seeding particles in water, and a laser sheet for illumination. With a finite time exposure, the particle motion was captured on a photograph as a pattern of streaks. The streak pattern was digitized and processed using various imaging operations, including contrast manipulation, noise cleaning, filtering, statistical differencing, and thresholding. Information concerning the velocity was extracted from the enhanced image by measuring the length and orientation of the individual streaks. The fluid velocities deduced from the randomly distributed particle streaks were interpolated to obtain velocities at uniform grid points. For the interpolation a simple convolution technique with an adaptive Gaussian window was used. The results are compared with a numerical prediction by a Navier-Stokes computation.

  3. Applied physiology of swimming.

    Science.gov (United States)

    Lavoie, J M; Montpetit, R R

    1986-01-01

    Scientific research in swimming over the past 10 to 15 years has been oriented toward multiple aspects that relate to applied and basic physiology, metabolism, biochemistry, and endocrinology. This review considers recent findings on: 1) specific physical characteristics of swimmers; 2) the energetics of swimming; 3) the evaluation of aerobic fitness in swimming; and 4) some metabolic and hormonal aspects related to swimmers. Firstly, the age of finalists in Olympic swimming is not much different from that of the participants from other sports. They are taller and heavier than a reference population of the same age. The height bias in swimming may be the reason for lack of success from some Asian and African countries. Experimental data point toward greater leanness, particularly in female swimmers, than was seen 10 years ago. Overall, female swimmers present a range of 14 to 19% body fat whereas males are much lower (5 to 10%). Secondly, the relationship between O2 uptake and crawl swimming velocity (at training and competitive speeds) is thought to be linear. The energy cost varies between strokes with a dichotomy between the 2 symmetrical and the 2 asymmetrical strokes. Energy expenditure in swimming is represented by the sum of the cost of translational motion (drag) and maintenance of horizontal motion (gravity). The cost of the latter decreases as speed increases. Examination of the question of size-associated effects on the cost of swimming using Huxley's allometric equation (Y = axb) shows an almost direct relationship with passive drag. Expressing energy cost in litres of O2/m/kg is proposed as a better index of technical swimming ability than the traditional expression of VO2/distance in L/km. Thirdly, maximal direct conventional techniques used to evaluate maximal oxygen consumption (VO2 max) in swimming include free swimming, tethered swimming, and flume swimming. Despite the individual peculiarities of each method, with similar experimental conditions

  4. Essays in Applied Microeconomics

    Science.gov (United States)

    Ge, Qi

    This dissertation consists of three self-contained applied microeconomics essays on topics related to behavioral economics and industrial organization. Chapter 1 studies how sentiment as a result of sports event outcomes affects consumers' tipping behavior in the presence of social norms. I formulate a model of tipping behavior that captures consumer sentiment following a reference-dependent preference framework and empirically test its relevance using the game outcomes of the NBA and the trip and tipping data on New York City taxicabs. While I find that consumers' tipping behavior responds to unexpected wins and losses of their home team, particularly in close game outcomes, I do not find evidence for loss aversion. Coupled with the findings on default tipping, my empirical results on the asymmetric tipping responses suggest that while social norms may dominate loss aversion, affect and surprises can result in freedom on the upside of tipping. Chapter 2 utilizes a novel data source of airline entry and exit announcements and examines how the incumbent airlines adjust quality provisions as a response to their competitors' announcements and the role of timing in such responses. I find no evidence that the incumbents engage in preemptive actions when facing probable entry and exit threats as signaled by the competitors' announcements in either short term or long term. There is, however, evidence supporting their responses to the competitors' realized entry or exit. My empirical findings underscore the role of timing in determining preemptive actions and suggest that previous studies may have overestimated how the incumbent airlines respond to entry threats. Chapter 3, which is collaborated with Benjamin Ho, investigates the habit formation of consumers' thermostat setting behavior, an often implicitly made decision and yet a key determinant of home energy consumption and expenditures. We utilize a high frequency dataset on household thermostat usage and find that

  5. Development of Meandering Winding Magnetometer (MWM (Register Trademark)) Eddy Current Sensors for the Health Monitoring, Modeling and Damage Detection of High Temperature Composite Materials

    Science.gov (United States)

    Russell, Richard; Washabaugh, Andy; Sheiretov, Yanko; Martin, Christopher; Goldfine, Neil

    2011-01-01

    The increased use of high-temperature composite materials in modern and next generation aircraft and spacecraft have led to the need for improved nondestructive evaluation and health monitoring techniques. Such technologies are desirable to improve quality control, damage detection, stress evaluation and temperature measurement capabilities. Novel eddy current sensors and sensor arrays, such as Meandering Winding Magnetometers (MWMs) have provided alternate or complimentary techniques to ultrasound and thermography for both nondestructive evaluation (NDE) and structural health monitoring (SHM). This includes imaging of composite material quality, damage detection and .the monitoring of fiber temperatures and multidirectional stresses. Historically, implementation of MWM technology for the inspection of the Space Shuttle Orbiter Reinforced Carbon-Carbon Composite (RCC) leading edge panels was developed by JENTEK Sensors and was subsequently transitioned by NASA as an operational pre and post flight in-situ inspection at the Kennedy Space Center. A manual scanner, which conformed'automatically to the curvature of the RCC panels was developed and used as a secondary technique if a defect was found during an infrared thermography screening, During a recent proof of concept study on composite overwrapped pressure vessels (COPV's), three different MWM sensors were tested at three orientations to demonstrate the ability of the technology to measure stresses at various fiber orientations and depths. These results showed excellent correlation with actual surface strain gage measurements. Recent advancements of this technology have been made applying MWM sensor technology for scanning COPVs for mechanical damage. This presentation will outline the recent advance in the MWM.technology and the development of MWM techniques for NDE and SHM of carbon wraped composite overwrapped pressure vessels (COPVs) including the measurement of internal stresses via a surface mounted sensor

  6. Applied group theory selected readings in physics

    CERN Document Server

    Cracknell, Arthur P

    1968-01-01

    Selected Readings in Physics: Applied Group Theory provides information pertinent to the fundamental aspects of applied group theory. This book discusses the properties of symmetry of a system in quantum mechanics.Organized into two parts encompassing nine chapters, this book begins with an overview of the problem of elastic vibrations of a symmetric structure. This text then examines the numbers, degeneracies, and symmetries of the normal modes of vibration. Other chapters consider the conditions under which a polyatomic molecule can have a stable equilibrium configuration when its electronic

  7. Applied mathematics for science and engineering

    CERN Document Server

    Glasgow, Larry A

    2014-01-01

    Prepare students for success in using applied mathematics for engineering practice and post-graduate studies moves from one mathematical method to the next sustaining reader interest and easing the application of the techniques Uses different examples from chemical, civil, mechanical and various other engineering fields Based on a decade's worth of the authors lecture notes detailing the topic of applied mathematics for scientists and engineers Concisely writing with numerous examples provided including historical perspectives as well as a solutions manual for academic adopters

  8. Applied Ethics in Nowadays Society

    OpenAIRE

    Tomita CIULEI

    2013-01-01

    This special issue is dedicated to Nowadays Applied Ethics in Society, and falls in the field of social sciences and humanities, being hosted both theoretical approaches and empirical research in various areas of applied ethics. Applied ethics analyzes of a series of morally concrete situations of social or professional practice in order to make / adopt decisions. In the field of applied ethics are integrated medical ethics, legal ethics, media ethics, professional ethics, environmental ethic...

  9. Applied Ethics in Nowadays Society

    OpenAIRE

    Tomita CIULEI

    2013-01-01

    This special issue is dedicated to Nowadays Applied Ethics in Society, and falls in the field of social sciences and humanities, being hosted both theoretical approaches and empirical research in various areas of applied ethics. Applied ethics analyzes of a series of morally concrete situations of social or professional practice in order to make / adopt decisions. In the field of applied ethics are integrated medical ethics, legal ethics, media ethics, professional ethics, environmental ethic...

  10. The Routledge Applied Linguistics Reader

    Science.gov (United States)

    Wei, Li, Ed.

    2011-01-01

    "The Routledge Applied Linguistics Reader" is an essential collection of readings for students of Applied Linguistics. Divided into five sections: Language Teaching and Learning, Second Language Acquisition, Applied Linguistics, Identity and Power and Language Use in Professional Contexts, the "Reader" takes a broad interpretation of the subject…

  11. The Routledge Applied Linguistics Reader

    Science.gov (United States)

    Wei, Li, Ed.

    2011-01-01

    "The Routledge Applied Linguistics Reader" is an essential collection of readings for students of Applied Linguistics. Divided into five sections: Language Teaching and Learning, Second Language Acquisition, Applied Linguistics, Identity and Power and Language Use in Professional Contexts, the "Reader" takes a broad…

  12. Recombinant vaccines: experimental and applied aspects

    DEFF Research Database (Denmark)

    Lorenzen, Niels

    1999-01-01

    Development of vaccines for aquaculture fish represent an important applied functional aspect of fish immunology research. Particularly in the case of recombinant vaccines, where a single antigen is usually expected to induce immunity to a specific pathogen, knowledge of mechanisms involved in in......, these fields will open up a number of interesting research objectives of mutual benefit. Recent aspects of recombinant protein vaccines, live recombinant vaccines and DNA vaccines are discussed.......Development of vaccines for aquaculture fish represent an important applied functional aspect of fish immunology research. Particularly in the case of recombinant vaccines, where a single antigen is usually expected to induce immunity to a specific pathogen, knowledge of mechanisms involved...... in induction of a protective immune response may become vital. The few recombinant vaccines licensd so far, despite much research during the last decade, illustrate that this is not a straightforward matter. However, as vaccine technology as well as our knowledge of the fish immune system is steadily improved...

  13. Applying incentive sensitization models to behavioral addiction

    DEFF Research Database (Denmark)

    Rømer Thomsen, Kristine; Fjorback, Lone; Møller, Arne

    2014-01-01

    The incentive sensitization theory is a promising model for understanding the mechanisms underlying drug addiction, and has received support in animal and human studies. So far the theory has not been applied to the case of behavioral addictions like Gambling Disorder, despite sharing clinical...... symptoms and underlying neurobiology. We examine the relevance of this theory for Gambling Disorder and point to predictions for future studies. The theory promises a significant contribution to the understanding of behavioral addiction and opens new avenues for treatment....

  14. Goryachkin's agricultural mechanics

    Science.gov (United States)

    Chinenova, Vera

    2016-03-01

    The paper contributes to the development of applied mechanics by establishing a new discipline, namely, agricultural mechanics by academician Vasilii Prohorovich Goryachkin (1868-1935) who was an apprentice of Nikolay Yegorovich Zhukovsky and a graduate of the Moscow University (current known as Moscow State University) and the Imperial Higher Technical School.

  15. 应用型高校科研管理机制的优化--基于重庆4所地方本科高校的调研分析%Applied Optimization of College Scientific Research Management Mechanism-Based on the Research Analysis of Chongqing 4 Local Undergraduate Colleges and Universities

    Institute of Scientific and Technical Information of China (English)

    罗洁; 杜孝田

    2016-01-01

    The mechanism of college scientific research management relates to the success or failure of applied undergraduate education.Relative to mainly research type university,in the tasks of popularization of higher education popularization of newly built undergraduate course colleges and universities,in the realization of scientific research based on the local economic need truly,establish distinctive innovation subjects,etc,put forward higher requirements for scientific research management mechanism.%高校科研管理机制关系到应用型本科教育的成败。相对于研究为主型大学,在承担大众化高等教育普及重任的新建本科院校,在实现科研成果真正立足地方经济需要,创办有特色的创新学科等方面对于科研管理机制提出了更高的要求。

  16. Quantum mechanics in chemistry

    CERN Document Server

    Schatz, George C

    2002-01-01

    Intended for graduate and advanced undergraduate students, this text explores quantum mechanical techniques from the viewpoint of chemistry and materials science. Dynamics, symmetry, and formalism are emphasized. An initial review of basic concepts from introductory quantum mechanics is followed by chapters examining symmetry, rotations, and angular momentum addition. Chapter 4 introduces the basic formalism of time-dependent quantum mechanics, emphasizing time-dependent perturbation theory and Fermi's golden rule. Chapter 5 sees this formalism applied to the interaction of radiation and matt

  17. Testing Nonassociative Quantum Mechanics.

    Science.gov (United States)

    Bojowald, Martin; Brahma, Suddhasattwa; Büyükçam, Umut

    2015-11-27

    The familiar concepts of state vectors and operators in quantum mechanics rely on associative products of observables. However, these notions do not apply to some exotic systems such as magnetic monopoles, which have long been known to lead to nonassociative algebras. Their quantum physics has remained obscure. This Letter presents the first derivation of potentially testable physical results in nonassociative quantum mechanics, based on effective potentials. They imply new effects which cannot be mimicked in usual quantum mechanics with standard magnetic fields.

  18. Applied Ethics in Nowadays Society

    Directory of Open Access Journals (Sweden)

    Tomita CIULEI

    2013-12-01

    Full Text Available This special issue is dedicated to Nowadays Applied Ethics in Society, and falls in the field of social sciences and humanities, being hosted both theoretical approaches and empirical research in various areas of applied ethics. Applied ethics analyzes of a series of morally concrete situations of social or professional practice in order to make / adopt decisions. In the field of applied ethics are integrated medical ethics, legal ethics, media ethics, professional ethics, environmental ethics, business ethics etc. Classification-JEL: A23

  19. Journal of Applied Sciences and Environmental Management - Vol ...

    African Journals Online (AJOL)

    Journal of Applied Sciences and Environmental Management. ... Assessment of Anthropogenic Activities on Water Quality of Benin River · EMAIL FREE ... Tree Leaves as Bioindicator of Heavy Metal Pollution in Mechanic Village, Ogun State.

  20. Development of the Applied Baccalaureate

    Science.gov (United States)

    Townsend, Barbara K.; Bragg, Debra D.; Ruud, Collin M.

    2009-01-01

    Increasing demands for economic competitiveness and educational effectiveness have led states and institutions to implement new approaches to facilitating baccalaureate completion. This study examined one of these approaches, the applied baccalaureate degree, which is designed to incorporate applied associate course work and degrees once…

  1. Writing, Literacy, and Applied Linguistics.

    Science.gov (United States)

    Leki, Ilona

    2000-01-01

    Discusses writing and literacy in the domain of applied linguistics. Focus is on needs analysis for literacy acquisition; second language learner identity; longitudinal studies as extensions of identity work; and applied linguistics contributions to second language literacy research. (Author/VWL)

  2. Conversation Analysis and Applied Linguistics.

    Science.gov (United States)

    Schegloff, Emanuel A.; Koshik, Irene; Jacoby, Sally; Olsher, David

    2002-01-01

    Offers biographical guidance on several major areas of conversation-analytic work--turn-taking, repair, and word selection--and indicates past or potential points of contact with applied linguistics. Also discusses areas of applied linguistic work. (Author/VWL)

  3. 40-in. OMS Kevlar(Registered Trademark) COPV S/N 007 Stress Rupture Test NDE

    Science.gov (United States)

    Saulsberry, Regor; Greene, Nate; Forth, Scott; Leifeste, Mark; Gallus, Tim; Yoder, Tommy; Keddy, Chris; Mandaras, Eric; Wincheski, Buzz; Williams, Philip; Russell, Richard; Eldridge, Jeff

    2010-01-01

    The presentation examines pretest nondestructive evaluation (NDE), including external/internal visual inspection, raman spectroscopy, laser shearography, and laser profilometry; real-time NDE including eddy current, acoustic emission (AE), and real-time portable raman spectroscopy; and AE application to carbon/epoxy composite overwrapped pressure vessels.

  4. Defining the coupled effects of cryogenic, space-radiation, and hypervelocity impact damamge on COPV's Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The objective of the research proposed herein is to define the coupled (combined) effect of critical environments on the structural performance of composite overwrap...

  5. Applied probability and stochastic processes

    CERN Document Server

    Sumita, Ushio

    1999-01-01

    Applied Probability and Stochastic Processes is an edited work written in honor of Julien Keilson. This volume has attracted a host of scholars in applied probability, who have made major contributions to the field, and have written survey and state-of-the-art papers on a variety of applied probability topics, including, but not limited to: perturbation method, time reversible Markov chains, Poisson processes, Brownian techniques, Bayesian probability, optimal quality control, Markov decision processes, random matrices, queueing theory and a variety of applications of stochastic processes. The book has a mixture of theoretical, algorithmic, and application chapters providing examples of the cutting-edge work that Professor Keilson has done or influenced over the course of his highly-productive and energetic career in applied probability and stochastic processes. The book will be of interest to academic researchers, students, and industrial practitioners who seek to use the mathematics of applied probability i...

  6. Social and Psychological Aspects of Applied Human Genetics: A Bibliography.

    Science.gov (United States)

    Sorenson, James R., Comp.

    This bibliography is a selective compilation of books and articles which focus on the psychological and social issues of applied human genetics. It is centered in particular around problems, issues, and discussions of genetic counseling, the primary mechanism by which human genetics has been applied to date. It includes those entries which, on the…

  7. Damage Control Plan for International Space Station Recharge Tank Assembly Composite Overwrapped Pressure Vessel

    Science.gov (United States)

    Cook, Anthony J.

    2011-01-01

    As NASA has retired the Space Shuttle Program, a new method of transporting compressed gaseous nitrogen and oxygen needed to be created for delivery of these crucial life support resources to the International Space Station (ISS). One of the methods selected by NASA includes the use of highly pressurized, unprotected Recharge Tank Assemblies (RTAs) utilizing Composite Overwrapped Pressure Vessels (COPVs). A COPV consists of a thin liner wrapped with a fiber composite and resin or epoxy. It is typically lighter weight than an all metal pressure vessel of similar volume and therefore provides a higher-efficiency means for gas storage. However COPVs are known to be susceptible to damage resulting from handling, tool drop impacts, or impacts from other objects. As a result, a comprehensive Damage Control Plan has been established to mitigate damage to the RTA COPV throughout its life cycle. The DCP is intended to evaluate and mitigate defined threats during manufacturing, shipping and handling, test, assembly level integration, shipment while pressurized, launch vehicle integration and mission operations by defining credible threats and methods for preventing potential damage while still maintaining the primary goal of resupplying ISS gas resources. A comprehensive threat assessment is performed to identify all threats posed to the COPV during the different phases of its lifecycle. The threat assessment is then used as the basis for creating a series of general inspection, surveillance and reporting requirements which apply across all phases of the COPV's life, targeted requirements only applicable to specific work phases and a series of training courses for both ground personnel and crew aboard the ISS. A particularly important area of emphasis deals with creating DCP requirements for a highly pressurized, large and unprotected RTA COPV for use during Inter Vehicular Activities (IVA) operations in the micro gravity environment while supplying pressurized gas to the

  8. 教育信息资源用户使用激励机制的数学模型与仿真*--基于“教育信息券”的构想与使用分析%A Mathematical Model and Simulation of Incentive Mechanism Applied by Education Information Resources Users:the Imagination and Using Analysis of Education Information Voucher

    Institute of Scientific and Technical Information of China (English)

    江星玲; 熊才平; 杨文正; 边志贤; 张文超

    2014-01-01

    For low utilization ratio of education information resources and users ’ lack of extrinsic motivation to use education information resources, with an analysis of the characteristics of education information resources, the process of users ’ applying information resources and education information voucher superiority, the incentive mechanism that users use education information resources by vouchers, save points, make term settlement, obtain rewards is proposed in the paper. In order to take full advantage of mathematical model which can bridge from the theory to practice, a mathematical model of incentive mechanism applied by education information resources users is constructed. The model is verified the feasibility by computer random simulation. The results show that the mathematical model can provide the users important measures to use information resources actively and the evidence to allocate education information resources funds scientifically.%针对教育信息资源利用率低下,用户缺乏使用教育信息资源外在动机的问题,从教育信息资源的特征和用户使用信息资源过程入手,借鉴“教育信息券”的优势,提出用户“凭券使用、累计积分、定期结算、获得奖励”的激励机制。充分发挥数学建模将理论层面的认识引向实践可操作的桥梁优势,构建教育信息资源用户使用激励机制的数学模型,并采用计算机随机模拟,验证了模型的可行性。不仅可以作为刺激用户主动使用信息资源的重要措施,还可以为教育信息资源建设经费的科学划拨提供依据。

  9. Applied Stress Affecting the Environmentally Assisted Cracking

    Science.gov (United States)

    Vasudevan, A. K.

    2013-03-01

    Stress corrosion cracking (SCC) is affected by the mode of applied stress, i.e., tension, compression, or torsion. The cracking is measured in terms of initiation time to nucleate a crack or time to failure. In a simple uniaxial loading under tension or compression, it is observed that the initiation time can vary in orders of magnitude depending on the alloy and the environment. Fracture can be intergranular or transgranular or mixed mode. Factors that affect SCC are solubility of the metal into surrounding chemical solution, and diffusion rate (like hydrogen into a tensile region) of an aggressive element into the metal and liquid metallic elements in the grain boundaries. Strain hardening exponent that affects the local internal stresses and their gradients can affect the diffusion kinetics. We examine two environments (Ga and 3.5 pct NaCl) for the same alloy 7075-T651, under constant uniaxial tension and compression load. These two cases provide us application to two different governing mechanisms namely liquid metal embrittlement (7075-Ga) and hydrogen-assisted cracking (7075-NaCl). We note that, in spite of the differences in their mechanisms, both systems show similar behavior in the applied K vs crack initiation time plots. One common theme among them is the transport mechanism of a solute element to a tensile-stress region to initiate fracture.

  10. Mechanics for materials and technologies

    CERN Document Server

    Goldstein, Robert; Murashkin, Evgenii

    2017-01-01

    This book shows impressively how complex mathematical modeling of materials can be applied to technological problems. Top-class researchers present the theoretical approaches in modern mechanics and apply them to real-world problems in solid mechanics, creep, plasticity, fracture, impact, and friction. They show how they can be applied to technological challenges in various fields like aerospace technology, biological sciences and modern engineering materials.

  11. Continued Development of Meandering Winding Magnetometer (MWM (Register Trademark)) Eddy Current Sensors for the Health Monitoring, Modeling and Damage Detection of Composite Overwrapped Pressure Vessels

    Science.gov (United States)

    Russell, Richard; Wincheski, Russell; Jablonski, David; Washabaugh, Andy; Sheiretov, Yanko; Martin, Christopher; Goldfine, Neil

    2011-01-01

    Composite Overwrapped Pressure Vessels (COPVs) are used in essentially all NASA spacecraft, launch. vehicles and payloads to contain high-pressure fluids for propulsion, life support systems and science experiments. Failure of any COPV either in flight or during ground processing would result in catastrophic damage to the spacecraft or payload, and could lead to loss of life. Therefore, NASA continues to investigate new methods to non-destructively inspect (NDE) COPVs for structural anomalies and to provide a means for in-situ structural health monitoring (SHM) during operational service. Partnering with JENTEK Sensors, engineers at NASA, Kennedy Space Center have successfully conducted a proof-of-concept study to develop Meandering Winding Magnetometer (MWM) eddy current sensors designed to make direct measurements of the stresses of the internal layers of a carbon fiber composite wrapped COPV. During this study three different MWM sensors were tested at three orientations to demonstrate the ability of the technology to measure stresses at various fiber orientations and depths. These results showed good correlation with actual surface strain gage measurements. MWM-Array technology for scanning COPVs can reliably be used to image and detect mechanical damage. To validate this conclusion, several COPVs were scanned to obtain a baseline, and then each COPV was impacted at varying energy levels and then rescanned. The baseline subtracted images were used to demonstrate damage detection. These scans were performed with two different MWM-Arrays. with different geometries for near-surface and deeper penetration imaging at multiple frequencies and in multiple orientations of the linear MWM drive. This presentation will include a review of micromechanical models that relate measured sensor responses to composite material constituent properties, validated by the proof of concept study, as the basis for SHM and NDE data analysis as well as potential improvements including

  12. Mechanical Systems, Classical Models

    CERN Document Server

    Teodorescu, Petre P

    2009-01-01

    This third volume completes the Work Mechanical Systems, Classical Models. The first two volumes dealt with particle dynamics and with discrete and continuous mechanical systems. The present volume studies analytical mechanics. Topics like Lagrangian and Hamiltonian mechanics, the Hamilton-Jacobi method, and a study of systems with separate variables are thoroughly discussed. Also included are variational principles and canonical transformations, integral invariants and exterior differential calculus, and particular attention is given to non-holonomic mechanical systems. The author explains in detail all important aspects of the science of mechanics, regarded as a natural science, and shows how they are useful in understanding important natural phenomena and solving problems of interest in applied and engineering sciences. Professor Teodorescu has spent more than fifty years as a Professor of Mechanics at the University of Bucharest and this book relies on the extensive literature on the subject as well as th...

  13. Optimal alarm system applied in coffee rust

    Directory of Open Access Journals (Sweden)

    Luciene Resende Gonçalves

    2014-02-01

    Full Text Available Alarm systems have very great utility in detecting and warning of catastrophes. This methodology was applied via TARSO model with Bayesian estimation, serving as a forecasting mechanism for coffee rust disease. The coffee culture is very susceptible to this disease causing several records of incidence in most cultivated crops. Researches involving this limiting factor for production are intense and frequent, indicating environmental factors as responsible for the epidemics spread, which does not occur if these factors are not favorable. The fitting type used by the a posteriori probability, allows the system to be updated each time point. The methodology was applied to the rust index series in the presence of the average temperature series. Thus, it is possible to verify the alarm resulted or in a high catastrophe detection in points at which the catastrophe has not occurred, or in the low detections if the point was already in the catastrophe state.

  14. Shock Thermodynamic Applied Research Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Shock Thermodynamic Applied Research Facility (STAR) facility, within Sandia’s Solid Dynamic Physics Department, is one of a few institutions in the world with a...

  15. Shock Thermodynamic Applied Research Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Shock Thermodynamic Applied Research Facility (STAR) facility, within Sandia’s Solid Dynamic Physics Department, is one of a few institutions in the world with...

  16. Applied statistical inference with MINITAB

    CERN Document Server

    Lesik, Sally

    2009-01-01

    Through clear, step-by-step mathematical calculations, Applied Statistical Inference with MINITAB enables students to gain a solid understanding of how to apply statistical techniques using a statistical software program. It focuses on the concepts of confidence intervals, hypothesis testing, validating model assumptions, and power analysis.Illustrates the techniques and methods using MINITABAfter introducing some common terminology, the author explains how to create simple graphs using MINITAB and how to calculate descriptive statistics using both traditional hand computations and MINITAB. Sh

  17. Gulf International Conference on Applied Mathematics 2013

    CERN Document Server

    Advances in Applied Mathematics

    2014-01-01

    This volume contains contributions from the Gulf International Conference in Applied Mathematics, held at the Gulf University for Science & Technology. The proceedings reflects the three major themes of the conference. The first of these was mathematical biology, including a keynote address by Professor Philip Maini. The second theme was computational science/numerical analysis, including a keynote address by Professor Grigorii Shishkin. The conference also addressed more general applications topics, with papers in business applications, fluid mechanics, optimization, scheduling problems, and engineering applications, as well as a keynote by Professor Ali Nayfeh.

  18. Prospects for applying synthetic biology to toxicology

    DEFF Research Database (Denmark)

    Behrendorff, James Bruce Yarnton H; Gillam, Elizabeth M.J.

    2017-01-01

    The 30 years since the inception of Chemical Research in Toxicology, game-changing advances in chemical and molecular biology, the fundamental disciplines underpinning molecular toxicology, have been made. While these have led to important advances in the study of mechanisms by which chemicals...... damage cells and systems, there has been less focus on applying these advances to prediction, detection, and mitigation of toxicity. Over the last ∼15 years, synthetic biology, the repurposing of biological "parts" in systems engineered for useful ends, has been explored in other areas of the biomedical...... and life sciences, for such applications as detecting metabolites, drug discovery and delivery, investigating disease mechanisms, improving medical treatment, and producing useful chemicals. These examples provide models for the application of synthetic biology to toxicology, which, for the most part, has...

  19. The symbiosis between basic and applied research.

    Science.gov (United States)

    Leibowitz, H W

    1996-04-01

    To illustrate the interdependence between the solution of practical problems and the search for fundamental mechanisms, their relationship within the contexts of the history of night myopia and the problem of nighttime traffic accidents is discussed. Night myopia, or nearsightedness at night, which has been a problem since the late 18th century, was shown to be the result of a recently discovered oculomotor mechanism, the intermediate resting position of accommodation. With this knowledge, the handicap of nearsightedness at night ( a major problem in nighttime viewing such as driving and military operations) is readily amenable to solution. Recent developments in our knowledge of the functional significance of the nervous system has led to an increased understanding of the cause and to amelioration of nighttime traffic accidents. These developments illustrate the symbiotic relationship between basic and applied research and the benefits to be gained by consideration of both objectives.

  20. Puzzling Mechanisms

    Science.gov (United States)

    van Deventer, M. Oskar

    2009-01-01

    The basis of a good mechanical puzzle is often a puzzling mechanism. This article will introduce some new puzzling mechanisms, like two knots that engage like gears, a chain whose links can be interchanged, and flat gears that do not come apart. It illustrates how puzzling mechanisms can be transformed into real mechanical puzzles, e.g., by…

  1. Mechanics in medicine

    OpenAIRE

    Bao, Gang; Bazilevs, Yuri; Chung, Jae-Hyun; Decuzzi,Paolo; Espinosa, Horacio D.; Ferrari, Mauro; Gao, Huajian; Hossain, Shaolie S.; Hughes, Thomas J. R.; Kamm, Roger Dale; Liu, Wing Kam; Marsden, Alison; Schrefler, Bernhard

    2014-01-01

    Over decades, the theoretical and applied mechanics community has developed sophisticated approaches for analysing the behaviour of complex engineering systems. Most of these approaches have targeted systems in the transportation, materials, defence and energy industries. Applying and further developing engineering approaches for understanding, predicting and modulating the response of complicated biomedical processes not only holds great promise in meeting societal needs, but also poses seri...

  2. Synthesis of Mechanisms

    DEFF Research Database (Denmark)

    Hansen, John Michael

    1999-01-01

    These notes describe an automated procedure for analysis and synthesis of mechanisms. The analysis method is based on the body coordinate formulation, and the synthesis is based on applying optimization methods, used to minimize the difference between an actual and a desired behaviour......These notes describe an automated procedure for analysis and synthesis of mechanisms. The analysis method is based on the body coordinate formulation, and the synthesis is based on applying optimization methods, used to minimize the difference between an actual and a desired behaviour...

  3. Conversation Analysis in Applied Linguistics

    DEFF Research Database (Denmark)

    Kasper, Gabriele; Wagner, Johannes

    2014-01-01

    with understanding fundamental issues of talk in action and of intersubjectivity in human conduct. The field has expanded its scope from the analysis of talk—often phone calls—towards an integration of language with other semiotic resources for embodied action, including space and objects. Much of this expansion has...... been driven by applied work. After laying out CA's standard practices of data treatment and analysis, this article takes up the role of comparison as a fundamental analytical strategy and reviews recent developments into cross-linguistic and cross-cultural directions. The remaining article focuses......For the last decade, conversation analysis (CA) has increasingly contributed to several established fields in applied linguistics. In this article, we will discuss its methodological contributions. The article distinguishes between basic and applied CA. Basic CA is a sociological endeavor concerned...

  4. From art to applied science.

    Science.gov (United States)

    Schatzberg, Eric

    2012-09-01

    Before "applied science" and "technology" became keywords, the concept of art was central to discourse about material culture and its connections to natural knowledge. By the late nineteenth century, a new discourse of applied science had replaced the older discourse of art. This older discourse of art, especially as presented in Enlightenment encyclopedias, addressed the relationship between art and science in depth. But during the nineteenth century the concept of fine art gradually displaced the broader meanings of "art," thus undermining the utility of the term for discourse on the relationship between knowledge and practice. This narrowed meaning of "art" obscured key aspects of the industrial world. In effect, middle-class agents of industrialism, including "men of science," used the rhetoric of "applied science" and, later, "technology" to cement the exclusion of artisanal knowledge from the discourse of industrial modernity.

  5. 气道分级管理应用于慢性阻塞性肺疾病机械通气患者的效果分析%Effect analysis on airway management based on different grades applied in mechanically ventilated patients with chronic obstructive pulmonary disease

    Institute of Scientific and Technical Information of China (English)

    冯洁惠; 浦其斌; 高春华; 方琏; 徐建宁

    2012-01-01

    Objective To evaluate the intervention effect of airway management based on different grades applied in mechanically ventilated patients with chronic obstructive pulmonary disease(COPD). Method Divide 65 patients into observation group (n=33) and control group (n=32) by order. Patients in control group receive routine airway management of chest physiotherapy every 2 hours. Patients in observation group receive airway management based on different grades of chest physiotherapy on different frequency according to airway scores. Compare the tidal volume, respiratory rate, PaCOf2 and scores of acute physiology and chronic health of two groups on the 5th and 10th day undergoing mechanical ventilation. Compare the mechanical ventilation time and hospitalization time. Result Tidal volume, respiratory rate, PaCOf2 and scores of acute physiology and chronic health arc significantly better in observation group. Mechanical ventilation time is significantly shorter in observation group. There is no significant difference on hospitalization time between two groups. Conclusion Airway management based on different grades can improve the respiratory function for patients with chronic obstructive pulmonary disease effectively.%目的 评价慢性阻塞性肺疾病患者机械通气期间采用气道分级管理的干预效果.方法 按患者入科顺序将65例患者分为观察组33例和对照组32例.对照组按常规气道管理,每2 h予胸部物理治疗;观察组按气道评分实施气道分级管理,行不同频次物理治疗.比较两组机械通气第5天、第10天的潮气量、呼吸频率、动脉血二氧化碳分压及急性生理与慢性健康评分,比较两组机械通气时间和住院时间.结果 机械通气第10天,观察组潮气量、呼吸频率、动脉血二氧化碳分压的监测值优于对照组,急性生理与慢性健康评分低于对照组,机械通气时间明显少于对照组,经比较,差异均有统计学意义;两组住院时间比

  6. Applied medical statistics using SAS

    CERN Document Server

    Der, Geoff

    2012-01-01

    ""Each chapter in the book is well laid out, contains examples with SAS code, and ends with a concise summary. The chapters in the book contain the right level of information to use SAS to apply different statistical methods. … a good overview of how to apply in SAS 9.3 the many possible statistical analysis methods.""-Caroline Kennedy, Takeda Development Centre Europe Ltd., Statistical Methods for Medical Research, 2015""… a well-organized and thorough exploration of broad coverage in medical statistics. The book is an excellent reference of statistical methods

  7. Advanced Mechanics of Piezoelectricity

    CERN Document Server

    Qin, Qing-Hua

    2013-01-01

    "Advanced Mechanics of Piezoelectricity" presents a comprehensive treatment of piezoelectric materials using linear electroelastic theory, symplectic models, and Hamiltonian systems. It summarizes the current state of practice and presents the most recent research findings in piezoelectricity. It is intended for researchers and graduate students in the fields of applied mechanics, material science and engineering, computational engineering, and aerospace engineering. Dr. Qinghua Qin is a professor at the School of Engineering, Australian National University, Australia.

  8. Mechanical Engineering for Electronics.

    OpenAIRE

    Was, Loïc

    2012-01-01

    Schlumberger drilling tools are exposed to very hard loading conditions (shocks, vibrations, thermal cycling) while performing a job. As these tools are full of electronics, issues can quickly come from electronics failure. Mechanisms of failure occurring in electronics are very complex but can be predicted in some cases. The first part of the thesis describes in which context mechanical engineering applied to electronics is used in Schlumberger. The different kinds of failure which will be i...

  9. Problems in quantum mechanics

    CERN Document Server

    Gol'dman, I I

    2010-01-01

    A comprehensive collection of problems of varying degrees of difficulty in nonrelativistic quantum mechanics, with answers and completely worked-out solutions. Among the topics: one-dimensional motion, transmission through a potential barrier, commutation relations, angular momentum and spin, and motion of a particle in a magnetic field. An ideal adjunct to any textbook in quantum mechanics, useful in courses in atomic and nuclear physics, mathematical methods in physics, quantum statistics and applied differential equations. 1961 edition.

  10. On the Motivation Mechanism for the Hotel Trainees-Take the Trainees with the Major of Applied English as an Example%酒店实习生激励机制的探讨--以应用英语专业实习生为例

    Institute of Scientific and Technical Information of China (English)

    王小娟

    2015-01-01

    随着校企合作的进一步深化,实习生已经成为酒店业的重要人力资源。酒店业未来的成长和发展需要依靠众多高校毕业生来推动,特别是涉外国际酒店,对应用英语专业的学生求之若渴。如何激励酒店实习生并发挥其最大潜力是众多酒店人力资源管理者们关注的重点。马斯洛需求层次理论认为,人的需要是分层次的,由低到高依次为:生理需要、安全需要、社会需要、尊重需要、自我实现需要。笔者希望通过运用马斯洛需求层次理论,探讨我国酒店行业实习生激励机制。%With the depth of cooperation between the college and the enterprise,the trainees have become the important human resource in the hotel,especially for the international hotel,the students majored in applied English are much needed.How to motivate the hotel trainees to perform their most potential is the focus for the HR managers.The theory of Maslow's hierarchy of needs says the people require the needs of physiology,safety,social,esteem,self-actualization step by step.With the use of Maslow's theory,we discuss the motivation mechanism on the trainees in the hotel.

  11. Directional Deep Borehole Drilling Technology Applied to Water Detection and Drainage in Mechanized Gateway Driving Face of Coal Mining Face%定向深孔钻进技术在回采巷道机掘工作面探放水工程中的应用

    Institute of Scientific and Technical Information of China (English)

    张长荣; 周德柱; 郑坚

    2014-01-01

    In a construction of two mechanized driving air returning gateways of No.30201 coal mining face in Mudu Chaideng Mine ,a ZDY-6000LD model crawler type full hydraulic tunnel directional drill-ing rig manufactured by Xi’an Research Institute of China Coal Research Institute was applied to make directional drillings of one main borehole and two branch boreholes in a drilling field between the two gateways .Water detection was conducted on the water bearing conditions of the strata with a borehole depth of 18m above and below the gateway and a left and right of 30m.A quality long distance water detection and drainage and a rapid construction was realized with a good effect.%母杜柴登煤矿30201工作面2条机掘回风巷施工中,采用煤炭科学研究总院西安研究院生产的ZDY-6000LD型履带式全液压坑道定向深孔钻机,在2条巷道中间的钻场内,定向钻进1个主孔、2个分支孔,对巷道上方或下方18m、左右各30m范围内的地层含水情况进行探测,实现了长距离探放水优质、快速施工,取得了较好的效果。

  12. Applied photonic therapy in veterinary medicine

    Science.gov (United States)

    Wood, Terry R.; McLaren, Brian C.

    2005-04-01

    There can be no question that specific systemic physiological results occur, when red light (660nm) is applied to the skin, it is now more a question of detailed mechanisms. Before gathering statistically signifcant clinical trial data, it is important to first enumerate the type of results observed in practice. Case histories are presented highlighting the use of photonic therapy in veterinary medicine. Over 900 surgical procedures have been performed and documented, utilizing the principles of photonic therapy, and while hemostasis, pain relief, and nausea relief, were the primary goals, the peri-operative death rate, the post-operative seroma, and post-operative infection were reduced to almost zero, and there was a noticeable increase in the healing rate. Scientifically applied photonic therapy, rather than supplanting conventional veterinary medicine, compliments and increases the veterinarian's set of skills. This paper proposes a hypothesis of how 660 nm light applied to specific points on the skin, produces various physiological changes in animals. By using animals, there can be no placebo, hypnotic or psychosomatic confounding effects.

  13. Abductive networks applied to electronic combat

    Science.gov (United States)

    Montgomery, Gerard J.; Hess, Paul; Hwang, Jong S.

    1990-08-01

    A practical approach to dealing with combinatorial decision problems and uncertainties associated with electronic combat through the use of networks of high-level functional elements called abductive networks is presented. It describes the application of the Abductory Induction Mechanism (AIMTM) a supervised inductive learning tool for synthesizing polynomial abductive networks to the electronic combat problem domain. From databases of historical expert-generated or simulated combat engagements AIM can often induce compact and robust network models for making effective real-time electronic combat decisions despite significant uncertainties or a combinatorial explosion of possible situations. The feasibility of applying abductive networks to realize advanced combat decision aiding capabilities was demonstrated by applying AIM to a set of electronic combat simulations. The networks synthesized by AIM generated accurate assessments of the intent lethality and overall risk associated with a variety of simulated threats and produced reasonable estimates of the expected effectiveness of a group of electronic countermeasures for a large number of simulated combat scenarios. This paper presents the application of abductive networks to electronic combat summarizes the results of experiments performed using AIM discusses the benefits and limitations of applying abductive networks to electronic combat and indicates why abductive networks can often result in capabilities not attainable using alternative approaches. 1. ELECTRONIC COMBAT. UNCERTAINTY. AND MACHINE LEARNING Electronic combat has become an essential part of the ability to make war and has become increasingly complex since

  14. Applying and extending Oracle Spatial

    CERN Document Server

    Simon Gerard Greener, Siva Ravada

    2013-01-01

    This book is an advanced practical guide to applying and extending Oracle Spatial.This book is for existing users of Oracle and Oracle Spatial who have, at a minimum, basic operational experience of using Oracle or an equivalent database. Advanced skills are not required.

  15. Behavior Subtraction applied to radar

    NARCIS (Netherlands)

    Rossum, W.L. van; Caro Cuenca, M.

    2014-01-01

    An algorithm developed for optical images has been applied to radar data. The algorithm, Behavior Subtraction, is based on capturing the dynamics of a scene and detecting anomalous behavior. The radar application is the detection of small surface targets at sea. The sea surface yields the expected s

  16. Virtual reality applied to teletesting

    NARCIS (Netherlands)

    Berg, T.W. van den; Smeenk, R.J.M.; Mazy, A.; Jacques, P.; Argüello, L.; Mills, S.

    2003-01-01

    The activity "Virtual Reality applied to Teletesting" is related to a wider European Space Agency (ESA) initiative of cost reduction, in particular the reduction of test costs. Reduction of costs of space related projects have to be performed on test centre operating costs and customer company costs

  17. Applying statistics in behavioural research

    NARCIS (Netherlands)

    Ellis, J.L.

    2016-01-01

    Applying Statistics in Behavioural Research is written for undergraduate students in the behavioural sciences, such as Psychology, Pedagogy, Sociology and Ethology. The topics range from basic techniques, like correlation and t-tests, to moderately advanced analyses, like multiple regression and MAN

  18. Conditional Independence in Applied Probability.

    Science.gov (United States)

    Pfeiffer, Paul E.

    This material assumes the user has the background provided by a good undergraduate course in applied probability. It is felt that introductory courses in calculus, linear algebra, and perhaps some differential equations should provide the requisite experience and proficiency with mathematical concepts, notation, and argument. The document is…

  19. SEM in applied marketing research

    DEFF Research Database (Denmark)

    Sørensen, Bjarne Taulo; Tudoran, Ana Alina

    In this paper we discuss two SEM approaches: an exploratory structural equation modelling based on a more liberalised and inductive philosophy versus the classical SEM based on the traditional hypothetical-deductive approach. We apply these two modelling techniques to data from a consumer survey ...

  20. Applied Linguistics Research on Asianness

    Science.gov (United States)

    Kobayashi, Yoko

    2011-01-01

    As China is increasingly occupying the world's attention, its explosively expanding economical and political clout has also been felt in the applied linguistics domain, with the discussion on China's/Chinese language issues growing by leaps and bounds (e.g. China's English education policies, Chinese language classes in the West). Amid the world's…

  1. The Applied Connection for Sociology.

    Science.gov (United States)

    Boros, Alexander

    1984-01-01

    A survey of the 76 graduates of Kent State's applied sociology masters program, designed to prepare students for employment outside academe, found one graduate employed outside her field, four who continued their education and became practicing sociologists, and a majority who used their training as human service practitioners. (MSE)

  2. Applying Creativity Research to Cooking

    Science.gov (United States)

    Beghetto, Ronald A.; Kaufman, James C.; Hatcher, Ryan

    2016-01-01

    What, if any, benefit might there be to applying creativity research to cooking? The purpose of this paper was to address this question. Specifically, we draw on concepts and theories from creativity research to help clarify what is meant by creative cooking. This includes exploring creative cooking through the lens of the 4-C and Propulsion…

  3. Seven papers in applied mathematics

    CERN Document Server

    Anosov, D V; Bogolyubov, N N; Bogoyavlenskii, O I; Bondarchuk, V S

    1985-01-01

    These papers in applied mathematics have been carefully selected by a joint committee of the AMS, the Association for Symbolic Logic (ASL), and the Institute of Mathematical Statistics (IMS) from publications not otherwise translated into English. The translated papers are carefully edited prior to publication.

  4. Toward an Applied Administrative Science.

    Science.gov (United States)

    Dunbar, Roger L. M.

    1983-01-01

    A study of 65 articles from the 1981 volumes of "Administrative Science Quarterly" and "Harvard Business Review," using smallest space analysis, found that the few studies adopting subjective (instead of objective) approaches to analyzing organizational change were most likely to provide a basis for an applied administrative…

  5. Applying Creativity Research to Cooking

    Science.gov (United States)

    Beghetto, Ronald A.; Kaufman, James C.; Hatcher, Ryan

    2016-01-01

    What, if any, benefit might there be to applying creativity research to cooking? The purpose of this paper was to address this question. Specifically, we draw on concepts and theories from creativity research to help clarify what is meant by creative cooking. This includes exploring creative cooking through the lens of the 4-C and Propulsion…

  6. Toward an Applied Administrative Science.

    Science.gov (United States)

    Dunbar, Roger L. M.

    1983-01-01

    A study of 65 articles from the 1981 volumes of "Administrative Science Quarterly" and "Harvard Business Review," using smallest space analysis, found that the few studies adopting subjective (instead of objective) approaches to analyzing organizational change were most likely to provide a basis for an applied administrative…

  7. Abstractions for Mechanical Systems

    DEFF Research Database (Denmark)

    Sloth, Christoffer; Wisniewski, Rafael

    2012-01-01

    This paper proposes a method for discretizing the state space of mechanical systems. This is a first attempt in using reduction techniques for mechanical systems in the partitioning of the state space. The method relies on a combination of transversal and tangential manifolds for the conservative...... mechanical system. The tangential manifolds are generated using constants of motion, which can be derived from Noether's theorem. The transversal manifolds are subsequently generated on a reduced space, given by the Routhian, via action-angle coordinates. The method fully applies for integrable systems. We...

  8. Applied survival analysis using R

    CERN Document Server

    Moore, Dirk F

    2016-01-01

    Applied Survival Analysis Using R covers the main principles of survival analysis, gives examples of how it is applied, and teaches how to put those principles to use to analyze data using R as a vehicle. Survival data, where the primary outcome is time to a specific event, arise in many areas of biomedical research, including clinical trials, epidemiological studies, and studies of animals. Many survival methods are extensions of techniques used in linear regression and categorical data, while other aspects of this field are unique to survival data. This text employs numerous actual examples to illustrate survival curve estimation, comparison of survivals of different groups, proper accounting for censoring and truncation, model variable selection, and residual analysis. Because explaining survival analysis requires more advanced mathematics than many other statistical topics, this book is organized with basic concepts and most frequently used procedures covered in earlier chapters, with more advanced topics...

  9. Modern applied U-statistics

    CERN Document Server

    Kowalski, Jeanne

    2008-01-01

    A timely and applied approach to the newly discovered methods and applications of U-statisticsBuilt on years of collaborative research and academic experience, Modern Applied U-Statistics successfully presents a thorough introduction to the theory of U-statistics using in-depth examples and applications that address contemporary areas of study including biomedical and psychosocial research. Utilizing a "learn by example" approach, this book provides an accessible, yet in-depth, treatment of U-statistics, as well as addresses key concepts in asymptotic theory by integrating translational and cross-disciplinary research.The authors begin with an introduction of the essential and theoretical foundations of U-statistics such as the notion of convergence in probability and distribution, basic convergence results, stochastic Os, inference theory, generalized estimating equations, as well as the definition and asymptotic properties of U-statistics. With an emphasis on nonparametric applications when and where applic...

  10. NIIEFA accelerators for applied purposes

    Science.gov (United States)

    Vorogushin, M. F.; Strokach, A. P.; Filatov, O. G.

    2016-12-01

    Since the foundation of the institute, we have designed and delivered more than three hundred different accelerators to Russia and abroad: cyclotrons, linear accelerators, and neutron generators. The technical characteristics of our equipment makes it competitive on the international market. Here we present the application, main parameters, and status of accelerators manufactured by NIIEFA, as well as prospects for the development of electrophysical systems for applied purposes.

  11. An Applied Physicist Does Econometrics

    Science.gov (United States)

    Taff, L. G.

    2010-02-01

    The biggest problem those attempting to understand econometric data, via modeling, have is that economics has no F = ma. Without a theoretical underpinning, econometricians have no way to build a good model to fit observations to. Physicists do, and when F = ma failed, we knew it. Still desiring to comprehend econometric data, applied economists turn to mis-applying probability theory---especially with regard to the assumptions concerning random errors---and choosing extremely simplistic analytical formulations of inter-relationships. This introduces model bias to an unknown degree. An applied physicist, used to having to match observations to a numerical or analytical model with a firm theoretical basis, modify the model, re-perform the analysis, and then know why, and when, to delete ``outliers'', is at a considerable advantage when quantitatively analyzing econometric data. I treat two cases. One is to determine the household density distribution of total assets, annual income, age, level of education, race, and marital status. Each of these ``independent'' variables is highly correlated with every other but only current annual income and level of education follow a linear relationship. The other is to discover the functional dependence of total assets on the distribution of assets: total assets has an amazingly tight power law dependence on a quadratic function of portfolio composition. Who knew? )

  12. Towards "open applied" Earth sciences

    Science.gov (United States)

    Ziegler, C. R.; Schildhauer, M.

    2014-12-01

    Concepts of open science -- in the context of cyber/digital technology and culture -- could greatly benefit applied and secondary Earth science efforts. However, international organizations (e.g., environmental agencies, conservation groups and sustainable development organizations) that are focused on applied science have been slow to incorporate open practices across the spectrum of scientific activities, from data to decisions. Myriad benefits include transparency, reproducibility, efficiency (timeliness and cost savings), stakeholder engagement, direct linkages between research and environmental outcomes, reduction in bias and corruption, improved simulation of Earth systems and improved availability of science in general. We map out where and how open science can play a role, providing next steps, with specific emphasis on applied science efforts and processes such as environmental assessment, synthesis and systematic reviews, meta-analyses, decision support and emerging cyber technologies. Disclaimer: The views expressed in this paper are those of the authors and do not necessarily reflect the views or policies of the organizations for which they work and/or represent.

  13. Mechanics an intensive course

    CERN Document Server

    Chaichian, Masud; Tureanu, Anca

    2012-01-01

    Mechanics is one of the oldest and at the same time newest disciplines, in the sense that there are methods and principles developed first in mechanics but now widely used in almost all branches of physics: electrodynamics, quantum mechanics, classical and quantum field theory, special and general theory of relativity, etc. More than that, there are some formalisms like Lagrangian and Hamiltonian approaches, which represent the key stone for the development of the above-mentioned disciplines. During the last 20-25 years, classical mechanics has undergone an important revival associated with the progress in non-linear dynamics, applications of Noether’s theorem and the extension of variational principles in various interdisciplinary sciences (for instance, magnetofluid dynamics). Thus, there ought to exist a book concerned with the applied analytical formalism, first developed in the frame of theoretical mechanics, which has proved to be one of the most efficient tools of investigation in the entire arena of...

  14. Pulmonary mechanics during mechanical ventilation.

    Science.gov (United States)

    Henderson, William R; Sheel, A William

    2012-03-15

    The use of mechanical ventilation has become widespread in the management of hypoxic respiratory failure. Investigations of pulmonary mechanics in this clinical scenario have demonstrated that there are significant differences in compliance, resistance and gas flow when compared with normal subjects. This paper will review the mechanisms by which pulmonary mechanics are assessed in mechanically ventilated patients and will review how the data can be used for investigative research purposes as well as to inform rational ventilator management.

  15. Brief Introduction to Chinese Optics and Applied Optics Abstracts

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The Chinese Optics and Applied Optics Abstracts,sponsored by the Documentation and Information Center of the Chinese Academy of Sciences,the Optical Information Network of the Chinese Academy of Sciences and the Changchun Institute of Optics,Fine Mechanics and Physics of the Chinese Academy of Sciences,is one of the series of science and technology indexing periodicals published by the Chinese Academy of Sciences. The Chinese Optics and Applied Optics Abstracts started a quarterly publication in 1985,

  16. Quantum mechanical description of waveguides

    Institute of Scientific and Technical Information of China (English)

    Wang Zhi-Yong; Xiong Cai-Dong; He Bing

    2008-01-01

    Applying the spinor representation of the electromagnetic field,this paper present a quantum-mechanical description of waveguides.As an example of application,a potential qubit generated by photon tunnelling is discussed.

  17. Applied Mathematical Methods in Theoretical Physics

    Science.gov (United States)

    Masujima, Michio

    2005-04-01

    All there is to know about functional analysis, integral equations and calculus of variations in a single volume. This advanced textbook is divided into two parts: The first on integral equations and the second on the calculus of variations. It begins with a short introduction to functional analysis, including a short review of complex analysis, before continuing a systematic discussion of different types of equations, such as Volterra integral equations, singular integral equations of Cauchy type, integral equations of the Fredholm type, with a special emphasis on Wiener-Hopf integral equations and Wiener-Hopf sum equations. After a few remarks on the historical development, the second part starts with an introduction to the calculus of variations and the relationship between integral equations and applications of the calculus of variations. It further covers applications of the calculus of variations developed in the second half of the 20th century in the fields of quantum mechanics, quantum statistical mechanics and quantum field theory. Throughout the book, the author presents over 150 problems and exercises -- many from such branches of physics as quantum mechanics, quantum statistical mechanics, and quantum field theory -- together with outlines of the solutions in each case. Detailed solutions are given, supplementing the materials discussed in the main text, allowing problems to be solved making direct use of the method illustrated. The original references are given for difficult problems. The result is complete coverage of the mathematical tools and techniques used by physicists and applied mathematicians Intended for senior undergraduates and first-year graduates in science and engineering, this is equally useful as a reference and self-study guide.

  18. Applied Mechanism of A Cross-country Skiing Specialized Strength Training Aids Basing on the Kinematic Characteristics%基于运动学特征的越野滑雪专项力量训练器应用机理

    Institute of Scientific and Technical Information of China (English)

    刘贵宝; 杨春怀; 郭静璐

    2014-01-01

    利用运动图像解析法,通过与越野滑雪传统式同时推进技术动作的运动学特征进行对比分析,探讨一种新型越野滑雪专项力量辅助训练器的应用机理。发现这种训练器运动学特征与雪上传统式同时推进技术动作存在一定相关性。这种训练器较好地模拟了雪上传统式同时推进技术动作特点,丰富了陆地夏训期传统专项训练方法体系,有助于越野滑雪陆地、雪上专项化训练方法有效衔接。越野滑雪专项力量辅助训练器在运动学特征上对雪上专项技术动作的模拟性,可为发展有效的专项训练方法与手段提供理论依据。%With the method of moving image analysis,by comparing with the classical bilateral push technique of cross-country skiing basing on the kinematic characteristics,the paper discusses the applied mechanism of a new specialized strength training aids. It indicates the training movement on the aids is related to the snow movement in kinematic characteristics. The aids can well simulate the characteristics of classical bilateral push technique,and enrich the system of cross-country skiing specialized dry-land training methods,which is helpful to the effective connection from dry-land to snow specialized training methods. The aids’simulation of snow specialized technique basing on the kinematic characteristics can be a theoretical reference for developing more effective specialized training methods and means.

  19. Applied Mathematical Problems in Engineering

    Directory of Open Access Journals (Sweden)

    Carlos Llopis-Albert

    2016-10-01

    Full Text Available There is a close relationship between engineering and mathematics, which has led to the development of new techniques in recent years. Likewise the developments in technology and computers have led to new ways of teaching mathematics for engineering students and the use of modern techniques and methods.  This research aims to provide insight on how to deal with mathematical problems for engineering students. This is performed by means of a fuzzy set/Qualitative Comparative Analysis applied to conflict resolution of Public Participation Projects in support to the EU Water Framework Directive.

  20. Applying quantum principles to psychology

    Science.gov (United States)

    Busemeyer, Jerome R.; Wang, Zheng; Khrennikov, Andrei; Basieva, Irina

    2014-12-01

    This article starts out with a detailed example illustrating the utility of applying quantum probability to psychology. Then it describes several alternative mathematical methods for mapping fundamental quantum concepts (such as state preparation, measurement, state evolution) to fundamental psychological concepts (such as stimulus, response, information processing). For state preparation, we consider both pure states and densities with mixtures. For measurement, we consider projective measurements and positive operator valued measurements. The advantages and disadvantages of each method with respect to applications in psychology are discussed.

  1. Mechanisms for space applications

    Science.gov (United States)

    Meftah, M.; Irbah, A.; Le Letty, R.; Barré, M.; Pasquarella, S.; Bokaie, M.; Bataille, A.; Poiet, G.

    2012-06-01

    All space instruments contain mechanisms or moving mechanical assemblies that must move (sliding, rolling, rotating, or spinning) and their successful operation is usually mission-critical. Generally, mechanisms are not redundant and therefore represent potential single point failure modes. Several space missions have suffered anomalies or failures due to problems in applying space mechanisms technology. Mechanisms require a specific qualification through a dedicated test campaign. This paper covers the design, development, testing, production, and in-flight experience of the PICARD/SODISM mechanisms. PICARD is a space mission dedicated to the study of the Sun. The PICARD Satellite was successfully launched, on June 15, 2010 on a DNEPR launcher from Dombarovskiy Cosmodrome, near Yasny (Russia). SODISM (SOlar Diameter Imager and Surface Mapper) is a 11 cm Ritchey-Chretien imaging telescope, taking solar images at five wavelengths. SODISM uses several mechanisms (a system to unlock the door at the entrance of the instrument, a system to open/closed the door using a stepper motor, two filters wheels using a stepper motor, and a mechanical shutter). For the fine pointing, SODISM uses three piezoelectric devices acting on the primary mirror of the telescope. The success of the mission depends on the robustness of the mechanisms used and their life.

  2. Mechanical design

    CERN Document Server

    Risitano, Antonino

    2011-01-01

    METHODOLOGICAL STATEMENT OF ENGINEERING DESIGNApproaches to product design and developmentMechanical design and environmental requirementsPROPERTIES OF ENGINEERING MATERIALSMaterials for mechanical designCharacterization of metalsStress conditionsFatigue of materialsOptimum material selection in mechanical designDESIGN OF MECHANICAL COMPONENTS AND SYSTEMSFailure theoriesHertz theoryLubrificationShafts and bearingsSplines and keysSpringsFlexible machine elementsSpur gearsPress and shrink fitsPressure tubesCouplingsClutchesBrakes

  3. Applied superconductivity handbook on devices and applications

    CERN Document Server

    2015-01-01

    This wide-ranging presentation of applied superconductivity, from fundamentals and materials right up to the latest applications, is an essential reference for physicists and engineers in academic research as well as in the field. Readers looking for a systematic overview on superconducting materials will expand their knowledge and understanding of both low and high Tc superconductors, including organic and magnetic materials. Technology, preparation and characterization are covered for several geometries, but the main benefit of this work lies in its broad coverage of significant applications in power engineering or passive devices, such as filter and antenna or magnetic shields. The reader will also find information on superconducting magnets for diverse applications in mechanical engineering, particle physics, fusion research, medicine and biomagnetism, as well as materials processing. SQUIDS and their usage in medicine or geophysics are thoroughly covered as are applications in quantum metrology, and, las...

  4. Boolean function applied to Mimosa pudica movements.

    Science.gov (United States)

    De Luccia, Thiago Paes de Barros; Friedman, Pedro

    2011-09-01

    Seismonastic or thigmonastic movements of Mimosa pudica L. is mostly because of the fast loss of water from swollen motor cells, resulting in temporary collapse of cells and quick curvature in the parts where these cells are located. Because of this, the plant has been much studied since the 18th century, leading us to think about the classical binomial stimulus-response (action-reaction) when compared to animals. Mechanic and electrical stimuli were used to investigate the analogy of mimosa branch with an artificial neuron model and to observe the action potential propagation through the mimosa branch. Boolean function applied to the mimosa branch in analogy with an artificial neuron model is one of the peculiarities of our hypothesis.

  5. Mechanisms Design

    DEFF Research Database (Denmark)

    Restrepo-Giraldo, John Dairo

    2006-01-01

    Most products and machines involve some kind of controlled movement. From window casements to DVD players, from harbor cranes to the shears to prune your garden, all these machines require mechanisms to move. This course intends to provide the analytical and conceptual tools to design such mechan......Most products and machines involve some kind of controlled movement. From window casements to DVD players, from harbor cranes to the shears to prune your garden, all these machines require mechanisms to move. This course intends to provide the analytical and conceptual tools to design...... using criteria such as size, performance parameters, operation environment, etc. Content: Understanding Mechanisms Design (2 weeks) Definitions, mechanisms representations, kinematic diagrams, the four bar linkage, mobility, applications of mechanisms, types of mechanisms, special mechanisms, the design......: equations for various mechanisms. At the end of this module you will be able to analyze existing mechanisms and to describe their movement. Designing mechanisms (7 weeks) Type synthesis and dimensional synthesis, function generation, path generation, three precision points in multi-loop mechanisms...

  6. Comprehensive Environmental Assessment Applied to ...

    Science.gov (United States)

    In September 2013, EPA announced the availability of the final report, Comprehensive Environmental Assessment Applied to Multiwalled Carbon Nanotube Flame-Retardant Coatings in Upholstery Textiles: A Case Study Presenting Priority Research Gaps for Future Risk Assessments. This final report presents a case study of multiwalled carbon nanotubes (MWCNTs); it focuses on the specific example of MWCNTs as used in flame-retardant coatings applied to upholstery textiles. This case study is organized around the comprehensive environmental assessment (CEA) framework, which structures available information pertaining to the product life cycle, environmental transport and fate, exposure-dose in receptors (i.e., humans, ecological populations, and the environment), and potential impacts in these receptors. A group of experts representing multiple disciplines and multiple sector perspectives used an earlier draft of the case study in conjunction with a structured workshop process to identify and prioritize research gaps that, if pursued, could inform future MWCNT assessment efforts. The final report is not a health, risk, or exposure assessment and as such does not draw conclusions about potential risks, or present an exhaustive review of the literature. Rather, it presents the MWCNT research priorities that experts identified in this application of CEA in order to aid research planning throughout the scientific community. The outcomes of these research efforts may subsequ

  7. Workshop applied antineutrino physics 2007

    Energy Technology Data Exchange (ETDEWEB)

    Akiri, T.; Andrieu, B.; Anjos, J.; Argyriades, J.; Barouch, G.; Bernstein, A.; Bersillon, O.; Besida, O.; Bowden, N.; Cabrera, A.; Calmet, D.; Collar, J.; Cribier, M.; Kerret, H. de; Meijer, R. de; Dudziak, F.; Enomoto, S.; Fallot, M.; Fioni, G.; Fiorentini, G.; Gale, Ph.; Georgadze, A.; Giot, L.; Gonin, M.; Guillon, B.; Henson, C.; Jonkmans, G.; Kanamaru, S.; Kawasaki, T.; Kornoukhov, V.; Lasserre, Th.; Learned, J.G.; Lefebvre, J.; Letourneau, A.; Lhillier, D.; Lindner, M.; Lund, J.; Mantovani, F.; Mcdonough, B.; Mention, G.; Monteith, A.; Motta, D.; Mueller, Th.; Oberauer, L.; Obolensky, M.; Odrzywolek, A.; Petcov, S.; Porta, A.; Queval, R.; Reinhold, B.; Reyna, D.; Ridikas, D.; Sadler, L.; Schoenert, St.; Sida, J.L.; Sinev, V.; Suekane, F.; Suvorov, Y.; Svoboda, R.; Tang, A.; Tolich, N.; Tolich, K.; Vanka, S.; Vignaud, D.; Volpe, Ch.; Wong, H

    2007-07-01

    The 'Applied Antineutrino Physics 2007' workshop is the fourth international meeting devoted to the opening of the neutrino physics to more applied fields, such as geophysics and geochemistry, nuclear industry, as well as the nonproliferation. This meeting highlights the world efforts already engaged to exploit the single characteristics of the neutrinos for the control of the production of plutonium in the civil nuclear power reactor. The potential industrial application of the measurement of the thermal power of the nuclear plants by the neutrinos is also approached. earth neutrinos were for the first time highlighted in 2002 by the KamLAND experiment. Several international efforts are currently underway to use earth neutrinos to reveal the interior of the Earth. This meeting is an opportunity to adapt the efforts of detection to the real needs of geophysicists and geochemists (sources of radiogenic heat, potassium in the court, feathers.) Finally more futuristic topics such as the detection of nuclear explosions, of low powers, are also discussed. This document gathers only the slides of the presentations.

  8. Integration and control of metabolic systems: Pure and applied aspects

    Energy Technology Data Exchange (ETDEWEB)

    Wong, P.T.H.; Kon, O.L.; Chung, M.C.M.; Hwang, P.L.H.; Leong, S.F.; Loke, K.H.; Thiyagarajah, P.

    1987-01-01

    This volume brings together recent findings in many growing areas of biochemical research including molecular mechanisms of disease, drug design, gene structure and function, chemical signaling, metabolic control mechanisms, neurochemistry, immunology, the molecular biology of plants, marine biochemistry, oncogenes, growth factors, membrane functions, novel enzymes, applied biochemistry, and molecular engineering. It also contains contributions on powerful research techniques such as pulsed field gel electrophoresis, automated DNA sequencing, photoaffinity labeling, recent advances in plant cell culture, and high performance liquid chromatography.

  9. Discrete mechanics

    CERN Document Server

    Caltagirone, Jean-Paul

    2014-01-01

    This book presents the fundamental principles of mechanics to re-establish the equations of Discrete Mechanics. It introduces physics and thermodynamics associated to the physical modeling.  The development and the complementarity of sciences lead to review today the old concepts that were the basis for the development of continuum mechanics. The differential geometry is used to review the conservation laws of mechanics. For instance, this formalism requires a different location of vector and scalar quantities in space. The equations of Discrete Mechanics form a system of equations where the H

  10. Essentials of applied dynamic analysis

    CERN Document Server

    Jia, Junbo

    2014-01-01

    This book presents up-to-date knowledge of dynamic analysis in engineering world. To facilitate the understanding of the topics by readers with various backgrounds, general principles are linked to their applications from different angles. Special interesting topics such as statistics of motions and loading, damping modeling and measurement, nonlinear dynamics, fatigue assessment, vibration and buckling under axial loading, structural health monitoring, human body vibrations, and vehicle-structure interactions etc., are also presented. The target readers include industry professionals in civil, marine and mechanical engineering, as well as researchers and students in this area.

  11. Numerical simulation in applied geophysics

    CERN Document Server

    Santos, Juan Enrique

    2016-01-01

    This book presents the theory of waves propagation in a fluid-saturated porous medium (a Biot medium) and its application in Applied Geophysics. In particular, a derivation of absorbing boundary conditions in viscoelastic and poroelastic media is presented, which later is employed in the applications. The partial differential equations describing the propagation of waves in Biot media are solved using the Finite Element Method (FEM). Waves propagating in a Biot medium suffer attenuation and dispersion effects. In particular the fast compressional and shear waves are converted to slow diffusion-type waves at mesoscopic-scale heterogeneities (on the order of centimeters), effect usually occurring in the seismic range of frequencies. In some cases, a Biot medium presents a dense set of fractures oriented in preference directions. When the average distance between fractures is much smaller than the wavelengths of the travelling fast compressional and shear waves, the medium behaves as an effective viscoelastic an...

  12. Applied public-key steganography

    Science.gov (United States)

    Guillon, Pierre; Furon, Teddy; Duhamel, Pierre

    2002-04-01

    We consider the problem of hiding information in a steganographic framework, i.e. embedding a binary message within an apparently innocuous content, in order to establish a suspicion-free digital communication channel. The adversary is passive as no intentional attack is foreseen. The only threat is that she discovers the presence of a hidden communication. The main goal of this article is to find if the Scalar Costa Scheme, a recently published embedding method exploiting side information at the encoder, is suitable for that framework. We justify its use assessing its security level with respect to the Cachin's criterion. We derive a public-key stego-system following the ideas of R. Anderson and P. Petitcolas. This technique is eventually applied to PCM audio contents. Experimental performances are detailed in terms of bit-rate and Kullback-Leibler distance.

  13. Applied geometry and discrete mathematics

    CERN Document Server

    Sturm; Gritzmann, Peter; Sturmfels, Bernd

    1991-01-01

    This volume, published jointly with the Association for Computing Machinery, comprises a collection of research articles celebrating the occasion of Victor Klee's sixty-fifth birthday in September 1990. During his long career, Klee has made contributions to a wide variety of areas, such as discrete and computational geometry, convexity, combinatorics, graph theory, functional analysis, mathematical programming and optimization, and theoretical computer science. In addition, Klee made important contributions to mathematics education, mathematical methods in economics and the decision sciences, applications of discrete mathematics in the biological and social sciences, and the transfer of knowledge from applied mathematics to industry. In honor of Klee's achievements, this volume presents more than forty papers on topics related to Klee's research. While the majority of the papers are research articles, a number of survey articles are also included. Mirroring the breadth of Klee's mathematical contributions, th...

  14. Special Functions for Applied Scientists

    CERN Document Server

    Mathai, A M

    2008-01-01

    Special Functions for Applied Scientists provides the required mathematical tools for researchers active in the physical sciences. The book presents a full suit of elementary functions for scholars at the PhD level and covers a wide-array of topics and begins by introducing elementary classical special functions. From there, differential equations and some applications into statistical distribution theory are examined. The fractional calculus chapter covers fractional integrals and fractional derivatives as well as their applications to reaction-diffusion problems in physics, input-output analysis, Mittag-Leffler stochastic processes and related topics. The authors then cover q-hypergeometric functions, Ramanujan's work and Lie groups. The latter half of this volume presents applications into stochastic processes, random variables, Mittag-Leffler processes, density estimation, order statistics, and problems in astrophysics. Professor Dr. A.M. Mathai is Emeritus Professor of Mathematics and Statistics, McGill ...

  15. [Basic science and applied science].

    Science.gov (United States)

    Pérez-Tamayo, R

    2001-01-01

    A lecture was presented by the author at the Democratic Opinion Forum on Health Teaching and Research, organized by Mexico's National Health Institutes Coordinating Office, at National Cardiology Institute "Ignacio Chavez", where he presented a critical review of the conventional classification of basic and applied science, as well as his personal view on health science teaching and research. According to the author, "well-conducted science" is that "generating reality-checked knowledge" and "mis-conducted science" is that "unproductive or producing 'just lies' and 'non-fundable'. To support his views, the author reviews utilitarian and pejorative definitions of science, as well as those of committed and pure science, useful and useless science, and practical and esoterical science, as synonyms of applied and basic science. He also asserts that, in Mexico, "this classification has been used in the past to justify federal funding cutbacks to basic science, allegedly because it is not targeted at solving 'national problems' or because it was not relevant to priorities set in a given six-year political administration period". Regarding health education and research, the author asserts that the current academic programs are inefficient and ineffective; his proposal to tackle these problems is to carry out a solid scientific study, conducted by a multidisciplinary team of experts, "to design the scientific researcher curricula from recruitment of intelligent young people to retirement or death". Performance assessment of researchers would not be restricted to publication of papers, since "the quality of scientific work and contribution to the development of science is not reflected by the number of published papers". The English version of this paper is available at: http://www.insp.mx/salud/index.html

  16. Joining of HHF materials applying electroplating technology

    Energy Technology Data Exchange (ETDEWEB)

    Krauss, Wolfgang, E-mail: wolfgang.krauss@kit.edu; Lorenz, Julia; Konys, Jürgen

    2014-10-15

    Highlights: • Electroplating of fillers is industrially relevant for brazing in fusion. • Interlayers (Ni or Pd) improve adherence and reduce failure risks. • Tungsten and Eurofer joints successfully fabricated by electroplating. • Mechanical and non-destructive testing integrated into qualification. • Shear strength of W joints comparable with conventionally brazed steel. - Abstract: Tungsten will be used as armor material for blanket shielding and is designated as high heat flux material for divertors, beyond application of improved W composite alloys as structural material. Independent from design (water- or helium-cooled), a successful development is inherently correlated with joining of tungsten with functional components. Depending on the design variants, the fabricated joints have to guarantee specific functional or structural properties, e.g., good thermal conductivity or mechanical load transmission. Tungsten shows lacks in adapted joining due to its metallurgical behavior ranging from immiscibility over bad wetting to brittle intermetallic phase formation. Electroplating has shown to overcome such drawbacks and that homogeneous functional (e.g., Ni or Pd) and filler (e.g., Cu) layers can be deposited. In this paper the progress achieved in development of electroplating processes for joining W to W or steel to steel will be shown. The main focus will be the characterization of the processed joints applying metallurgical investigations including SEM/EDX analyses and non-destructive testing. The mechanical stability of the produced joints is demonstrated by presenting recent shear test data. The W–W joints failed due to cracking in W, whereas the steel–steel joints cracked in the brazing zone at about 200 N/mm{sup 2} load.

  17. 40 CFR 1051.115 - What other requirements apply?

    Science.gov (United States)

    2010-07-01

    ... vehicle must be jetted by the dealer or operator. (B) The air-fuel ratio of the engine when you do... POLLUTION CONTROLS CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES Emission Standards and... testing. (d) Other adjustments. This provision applies if an experienced mechanic can change your...

  18. Brief Introduction to Chinese Optics and Applied Optics Abstracts

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The Chinese Optics and Applied Optics Abstracts, sponsored by the Documentation and Information Center of the Chinese Academy of Sciences, the Optical Information Network of the Chinese Academy of Sciences and the Changchun Institute of Optics,Fine Mechanics and Physics of the Chinese Academy of Sciences, is one of the series of science and technology in-

  19. Brief Introduction to Chinese Optics and Applied Optics Abstracts

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The Chinese Optics and Applied Optics Abstracts,sponsored by the Documentation and Information Center of the Chinese Academy of Sciences,the Optical Information Network of the Chinese Academy of Sciences and the Changchun Institute of Optics,Fine Mechanics and Physics of the Chinese Academy of Sciences

  20. Mechanical science

    CERN Document Server

    Bolton, W C

    2013-01-01

    This book gives comprehensive coverage of mechanical science for HNC/HND students taking mechanical engineering courses, including all topics likely to be covered in both years of such courses, as well as for first year undergraduate courses in mechanical engineering. It features 500 problems with answers and 200 worked examples. The third edition includes a new section on power transmission and an appendix on mathematics to help students with the basic notation of calculus and solution of differential equations.

  1. Nanotechnologies applied to building sector.

    Directory of Open Access Journals (Sweden)

    Massimo Rossetti

    2009-06-01

    Full Text Available The article presents the state of the art and the most important tendencies of one of the most promising sectors within the scenario of technological innovation in constructions: the application to materials and components of the nanotechnologies, a kind of technologies that modify at infinitesimal scale the physical, chemical and mechanical characteristics of materials in a way which is not with the traditional technologies. A sector that has seen in the last years an exponential increase of technical solutions and brevets, most of them being born in other industrial sectors and then transferred and suited for the construction industry, to improve the performances of the materials used in terms of maintenance and conservation, performances, energy saving, aesthetics.

  2. Geometric mechanics

    CERN Document Server

    Muniz Oliva, Waldyr

    2002-01-01

    Geometric Mechanics here means mechanics on a pseudo-riemannian manifold and the main goal is the study of some mechanical models and concepts, with emphasis on the intrinsic and geometric aspects arising in classical problems. The first seven chapters are written in the spirit of Newtonian Mechanics while the last two ones as well as two of the four appendices describe the foundations and some aspects of Special and General Relativity. All the material has a coordinate free presentation but, for the sake of motivation, many examples and exercises are included in order to exhibit the desirable flavor of physical applications.

  3. Computer simulations applied in materials

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    This workshop takes stock of the simulation methods applied to nuclear materials and discusses the conditions in which these methods can predict physical results when no experimental data are available. The main topic concerns the radiation effects in oxides and includes also the behaviour of fission products in ceramics, the diffusion and segregation phenomena and the thermodynamical properties under irradiation. This document brings together a report of the previous 2002 workshop and the transparencies of 12 presentations among the 15 given at the workshop: accommodation of uranium and plutonium in pyrochlores; radiation effects in La{sub 2}Zr{sub 2}O{sub 7} pyrochlores; first principle calculations of defects formation energies in the Y{sub 2}(Ti,Sn,Zr){sub 2}O{sub 7} pyrochlore system; an approximate approach to predicting radiation tolerant materials; molecular dynamics study of the structural effects of displacement cascades in UO{sub 2}; composition defect maps for A{sup 3+}B{sup 3+}O{sub 3} perovskites; NMR characterization of radiation damaged materials: using simulation to interpret the data; local structure in damaged zircon: a first principle study; simulation studies on SiC; insertion and diffusion of He in 3C-SiC; a review of helium in silica; self-trapped holes in amorphous silicon dioxide: their short-range structure revealed from electron spin resonance and optical measurements and opportunities for inferring intermediate range structure by theoretical modelling. (J.S.)

  4. Applied discrete-time queues

    CERN Document Server

    Alfa, Attahiru S

    2016-01-01

    This book introduces the theoretical fundamentals for modeling queues in discrete-time, and the basic procedures for developing queuing models in discrete-time. There is a focus on applications in modern telecommunication systems. It presents how most queueing models in discrete-time can be set up as discrete-time Markov chains. Techniques such as matrix-analytic methods (MAM) that can used to analyze the resulting Markov chains are included. This book covers single node systems, tandem system and queueing networks. It shows how queues with time-varying parameters can be analyzed, and illustrates numerical issues associated with computations for the discrete-time queueing systems. Optimal control of queues is also covered. Applied Discrete-Time Queues targets researchers, advanced-level students and analysts in the field of telecommunication networks. It is suitable as a reference book and can also be used as a secondary text book in computer engineering and computer science. Examples and exercises are includ...

  5. Applied extreme-value statistics

    Energy Technology Data Exchange (ETDEWEB)

    Kinnison, R.R.

    1983-05-01

    The statistical theory of extreme values is a well established part of theoretical statistics. Unfortunately, it is seldom part of applied statistics and is infrequently a part of statistical curricula except in advanced studies programs. This has resulted in the impression that it is difficult to understand and not of practical value. In recent environmental and pollution literature, several short articles have appeared with the purpose of documenting all that is necessary for the practical application of extreme value theory to field problems (for example, Roberts, 1979). These articles are so concise that only a statistician can recognise all the subtleties and assumptions necessary for the correct use of the material presented. The intent of this text is to expand upon several recent articles, and to provide the necessary statistical background so that the non-statistician scientist can recognize and extreme value problem when it occurs in his work, be confident in handling simple extreme value problems himself, and know when the problem is statistically beyond his capabilities and requires consultation.

  6. Computer simulations applied in materials

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    This workshop takes stock of the simulation methods applied to nuclear materials and discusses the conditions in which these methods can predict physical results when no experimental data are available. The main topic concerns the radiation effects in oxides and includes also the behaviour of fission products in ceramics, the diffusion and segregation phenomena and the thermodynamical properties under irradiation. This document brings together a report of the previous 2002 workshop and the transparencies of 12 presentations among the 15 given at the workshop: accommodation of uranium and plutonium in pyrochlores; radiation effects in La{sub 2}Zr{sub 2}O{sub 7} pyrochlores; first principle calculations of defects formation energies in the Y{sub 2}(Ti,Sn,Zr){sub 2}O{sub 7} pyrochlore system; an approximate approach to predicting radiation tolerant materials; molecular dynamics study of the structural effects of displacement cascades in UO{sub 2}; composition defect maps for A{sup 3+}B{sup 3+}O{sub 3} perovskites; NMR characterization of radiation damaged materials: using simulation to interpret the data; local structure in damaged zircon: a first principle study; simulation studies on SiC; insertion and diffusion of He in 3C-SiC; a review of helium in silica; self-trapped holes in amorphous silicon dioxide: their short-range structure revealed from electron spin resonance and optical measurements and opportunities for inferring intermediate range structure by theoretical modelling. (J.S.)

  7. Applying lean thinking in construction

    Directory of Open Access Journals (Sweden)

    Remon Fayek Aziz

    2013-12-01

    Full Text Available The productivity of the construction industry worldwide has been declining over the past 40 years. One approach for improving the situation is using lean construction. Lean construction results from the application of a new form of production management to construction. Essential features of lean construction include a clear set of objectives for the delivery process, aimed at maximizing performance for the customer at the project level, concurrent design, construction, and the application of project control throughout the life cycle of the project from design to delivery. An increasing number of construction academics and professionals have been storming the ramparts of conventional construction management in an effort to deliver better value to owners while making real profits. As a result, lean-based tools have emerged and have been successfully applied to simple and complex construction projects. In general, lean construction projects are easier to manage, safer, completed sooner, and cost less and are of better quality. Significant research remains to complete the translation to construction of lean thinking in Egypt. This research will discuss principles, methods, and implementation phases of lean construction showing the waste in construction and how it could be minimized. The Last Planner System technique, which is an important application of the lean construction concepts and methodologies and is more prevalent, proved that it could enhance the construction management practices in various aspects. Also, it is intended to develop methodology for process evaluation and define areas for improvement based on lean approach principles.

  8. Applied computation and security systems

    CERN Document Server

    Saeed, Khalid; Choudhury, Sankhayan; Chaki, Nabendu

    2015-01-01

    This book contains the extended version of the works that have been presented and discussed in the First International Doctoral Symposium on Applied Computation and Security Systems (ACSS 2014) held during April 18-20, 2014 in Kolkata, India. The symposium has been jointly organized by the AGH University of Science & Technology, Cracow, Poland and University of Calcutta, India. The Volume I of this double-volume book contains fourteen high quality book chapters in three different parts. Part 1 is on Pattern Recognition and it presents four chapters. Part 2 is on Imaging and Healthcare Applications contains four more book chapters. The Part 3 of this volume is on Wireless Sensor Networking and it includes as many as six chapters. Volume II of the book has three Parts presenting a total of eleven chapters in it. Part 4 consists of five excellent chapters on Software Engineering ranging from cloud service design to transactional memory. Part 5 in Volume II is on Cryptography with two book...

  9. Probabilistic approach to mechanisms

    CERN Document Server

    Sandler, BZ

    1984-01-01

    This book discusses the application of probabilistics to the investigation of mechanical systems. The book shows, for example, how random function theory can be applied directly to the investigation of random processes in the deflection of cam profiles, pitch or gear teeth, pressure in pipes, etc. The author also deals with some other technical applications of probabilistic theory, including, amongst others, those relating to pneumatic and hydraulic mechanisms and roller bearings. Many of the aspects are illustrated by examples of applications of the techniques under discussion.

  10. Computational statistical mechanics

    CERN Document Server

    Hoover, WG

    1991-01-01

    Computational Statistical Mechanics describes the use of fast computers to simulate the equilibrium and nonequilibrium properties of gases, liquids, and solids at, and away from equilibrium. The underlying theory is developed from basic principles and illustrated by applying it to the simplest possible examples. Thermodynamics, based on the ideal gas thermometer, is related to Gibb's statistical mechanics through the use of Nosé-Hoover heat reservoirs. These reservoirs use integral feedback to control temperature. The same approach is carried through to the simulation and anal

  11. Problems in classical mechanics

    CERN Document Server

    Katkar, L N

    2014-01-01

    Problems in classical mechanics presents a lucid treatment of the formulations of Lagrangian, Hamiltonian, and the Principles of Calculus of Variations etc. important for the study of modern physics. The study of classical mechanics prepares students to apply the principles and the mathematical tools to solve real life problems. The book also incorporates and discusses in detail topics such as Central Force Motion, Rigid Body Motion and Canonical Transformations. KEY FEATURES: Around 200 solved examples with complete mathematical theory Around 70 examples given as an exercise to test and develop students understanding The physical interpretation of the Hamiltonian is highlighted

  12. Finite element computational fluid mechanics

    Science.gov (United States)

    Baker, A. J.

    1983-01-01

    Finite element analysis as applied to the broad spectrum of computational fluid mechanics is analyzed. The finite element solution methodology is derived, developed, and applied directly to the differential equation systems governing classes of problems in fluid mechanics. The heat conduction equation is used to reveal the essence and elegance of finite element theory, including higher order accuracy and convergence. The algorithm is extended to the pervasive nonlinearity of the Navier-Stokes equations. A specific fluid mechanics problem class is analyzed with an even mix of theory and applications, including turbulence closure and the solution of turbulent flows.

  13. Respiratory mechanics

    CERN Document Server

    Wilson, Theodore A

    2016-01-01

    This book thoroughly covers each subfield of respiratory mechanics: pulmonary mechanics, the respiratory pump, and flow. It presents the current understanding of the field and serves as a guide to the scientific literature from the golden age of respiratory mechanics, 1960 - 2010. Specific topics covered include the contributions of surface tension and tissue forces to lung recoil, the gravitational deformation of the lung, and the interdependence forces that act on pulmonary airways and blood vessels. The geometry and kinematics of the ribs is also covered in detail, as well as the respiratory action of the external and internal intercostal muscles, the mechanics of the diaphragm, and the quantitative compartmental models of the chest wall is also described. Additionally, flow in the airways is covered thoroughly, including the wave-speed and viscous expiratory flow-limiting mechanisms; convection, diffusion and the stationary front; and the distribution of ventilation. This is an ideal book for respiratory ...

  14. College mechanics

    CERN Document Server

    Şengül, Caner

    2016-01-01

    College Mechanics QueBank has been designed to be different, enthusiastic, interesting and helpful to you. Therefore, it is not just a test bank about mechanics but also it is like a compass in order to find your way in mechanics Each chapter in this book is put in an order to follow a hierarchy of the mechanics topics; from vectors to simple harmonic motion. Throughout the book there are many multiple choice and long answer questions for you to solve. They have been created for YGS, LYS, SAT, IB or other standardized exams in the world because mechanics has no boundaries and so Physics has no country. Learn the main principle of each chapter and explore the daily life applications. Then you can start to solve the questions by planning a problem solving method carefully. Finally, enjoy solving the questions and discover the meachanics of the universe once more.

  15. Quantum mechanics

    CERN Document Server

    Rae, Alastair I M

    2016-01-01

    A Thorough Update of One of the Most Highly Regarded Textbooks on Quantum Mechanics Continuing to offer an exceptionally clear, up-to-date treatment of the subject, Quantum Mechanics, Sixth Edition explains the concepts of quantum mechanics for undergraduate students in physics and related disciplines and provides the foundation necessary for other specialized courses. This sixth edition builds on its highly praised predecessors to make the text even more accessible to a wider audience. It is now divided into five parts that separately cover broad topics suitable for any general course on quantum mechanics. New to the Sixth Edition * Three chapters that review prerequisite physics and mathematics, laying out the notation, formalism, and physical basis necessary for the rest of the book * Short descriptions of numerous applications relevant to the physics discussed, giving students a brief look at what quantum mechanics has made possible industrially and scientifically * Additional end-of-chapter problems with...

  16. Counterforce applied to prevent spalling

    Energy Technology Data Exchange (ETDEWEB)

    Glamheden, Rune; Bergkvist, Lars (Golder Associates AB (Sweden)); Faelth, Billy (Clay Technology AB, Lund (Sweden)); Jacobsson, Lars (SP Technical Research Institute of Sweden, Boraas (Sweden)); Harrstroem, Johan (Geosigma AB, Uppsala (Sweden)); Berglund, Johan (Vattenfall Power Consultant AB, Stockholm (Sweden))

    2010-04-15

    The field experiment within CAPS (Counterforce Applied to Prevent Spalling) was initiated to determine if the application of dry bentonite pellets is sufficient to suppress thermally-induced spalling in KBS-3 deposition holes. The experience gained from Aespoe Pillar Stability Experiment, conducted between 2002 and 2006, indicated that spalling could be controlled by the application of a small confining pressure in the deposition holes. The CAPS field experiment that included four pairs of boreholes with a diameter of approximately 0.5 m, was carried out as a series of demonstration experiments in the TASQ-tunnel. The first and second heating tests were performed in open holes, without any confining pressure on the borehole wall and the third and fourth heating tests with a confining pressure created by expanded clay pellets (LECA). The first heating test was initiated at the end of August 2008 and the final test was finished at the end of May 2009. The trials suggest that the small confining pressure offered by the LECA pellets was adequate to control spalling and prevent the formation of a highly conductive zone of fractured rock in the 500-mm-diameter holes. It is recommended that a full-scale test be carried out to assess if the findings are applicable to 1,750-mm-diameter deposition holes. Should the full scale tests support the findings from these initial trials, filling the gap between the bentonite blocks and rock wall with dry bentonite pellets will provide a viable engineered solution for controlling the effects of thermally induced spalling in the KBS-3 deposition holes

  17. Gaitography applied to prosthetic walking.

    Science.gov (United States)

    Roerdink, Melvyn; Cutti, Andrea G; Summa, Aurora; Monari, Davide; Veronesi, Davide; van Ooijen, Mariëlle W; Beek, Peter J

    2014-11-01

    During walking on an instrumented treadmill with an embedded force platform or grid of pressure sensors, center-of-pressure (COP) trajectories exhibit a characteristic butterfly-like shape, reflecting the medio-lateral and anterior-posterior weight shifts associated with alternating steps. We define "gaitography" as the analysis of such COP trajectories during walking (the "gaitograms"). It is currently unknown, however, if gaitography can be employed to characterize pathological gait, such as lateralized gait impairments. We therefore registered gaitograms for a heterogeneous sample of persons with a trans-femoral and trans-tibial amputation during treadmill walking at a self-selected comfortable speed. We found that gaitograms directly visualize between-person differences in prosthetic gait in terms of step width and the relative duration of prosthetic and non-prosthetic single-support stance phases. We further demonstrated that one should not only focus on the gaitogram's shape but also on the time evolution along that shape, given that the COP evolves much slower in the single-support phase than in the double-support phase. Finally, commonly used temporal and spatial prosthetic gait characteristics were derived, revealing both individual and systematic differences in prosthetic and non-prosthetic step lengths, step times, swing times, and double-support durations. Because gaitograms can be rapidly collected in an unobtrusive and markerless manner over multiple gait cycles without constraining foot placement, clinical application of gaitography seems both expedient and appealing. Studies examining the repeatability of gaitograms and evaluating gaitography-based gait characteristics against a gold standard with known validity and reliability are required before gaitography can be clinically applied.

  18. Morphometrics applied to medical entomology.

    Science.gov (United States)

    Dujardin, Jean-Pierre

    2008-12-01

    Morphometrics underwent a revolution more than one decade ago. In the modern morphometrics, the estimate of size is now contained in a single variable reflecting variation in many directions, as many as there are landmarks under study, and shape is defined as their relative positions after correcting for size, position and orientation. With these informative data, and the corresponding software freely available to conduct complex analyses, significant biological and epidemiological features can be quantified more accurately. We discuss the evolutionary significance of the environmental impact on metric variability, mentioning the importance of concepts like genetic assimilation, genetic accommodation, and epigenetics. We provide examples of measuring the effect of selection on metric variation by comparing (unpublished) Qst values with corresponding (published) Fst. The primary needs of medical entomologists are to distinguish species, especially cryptic species, and to detect them where they are not expected. We explain how geometric morphometrics could apply to these questions, and where there are deficiencies preventing the approach from being utilized at its maximum potential. Medical entomologists in connection with control programs aim to identify isolated populations where the risk of reinfestation after treatment would be low ("biogeographical islands"). Identifying them can be obtained from estimating the number of migrants per generation. Direct assessment of movement remains the most valid approach, but it scores active movement only. Genetic methods estimating gene flow levels among interbreeding populations are commonly used, but gene flow does not necessarily mean the current flow of migrants. Methods using the morphometric variation are neither suited to evaluate gene flow, nor are they adapted to estimate the flow of migrants. They may provide, however, the information needed to create a preliminary map pointing to relevant areas where one could

  19. Quantum mechanics

    CERN Document Server

    Powell, John L

    2015-01-01

    Suitable for advanced undergraduates, this thorough text focuses on the role of symmetry operations and the essentially algebraic structure of quantum-mechanical theory. Based on courses in quantum mechanics taught by the authors, the treatment provides numerous problems that require applications of theory and serve to supplement the textual material.Starting with a historical introduction to the origins of quantum theory, the book advances to discussions of the foundations of wave mechanics, wave packets and the uncertainty principle, and an examination of the Schrödinger equation that includ

  20. Robot Mechanisms

    CERN Document Server

    Lenarcic, Jadran; Stanišić, Michael M

    2013-01-01

    This book provides a comprehensive introduction to the area of robot mechanisms, primarily considering industrial manipulators and humanoid arms. The book is intended for both teaching and self-study. Emphasis is given to the fundamentals of kinematic analysis and the design of robot mechanisms. The coverage of topics is untypical. The focus is on robot kinematics. The book creates a balance between theoretical and practical aspects in the development and application of robot mechanisms, and includes the latest achievements and trends in robot science and technology.

  1. Gauge mechanics

    CERN Document Server

    Mangiarotti, L

    1998-01-01

    This book presents in a unified way modern geometric methods in analytical mechanics based on the application of fibre bundles, jet manifold formalism and the related concept of connection. Non-relativistic mechanics is seen as a particular field theory over a one-dimensional base. In fact, the concept of connection is the major link throughout the book. In the gauge scheme of mechanics, connections appear as reference frames, dynamic equations, and in Lagrangian and Hamiltonian formalisms. Inertial forces, energy conservation laws and other phenomena related to reference frames are analyzed;

  2. Fracture mechanics

    CERN Document Server

    Perez, Nestor

    2017-01-01

    The second edition of this textbook includes a refined presentation of concepts in each chapter, additional examples; new problems and sections, such as conformal mapping and mechanical behavior of wood; while retaining all the features of the original book. The material included in this book is based upon the development of analytical and numerical procedures pertinent to particular fields of linear elastic fracture mechanics (LEFM) and plastic fracture mechanics (PFM), including mixed-mode-loading interaction. The mathematical approach undertaken herein is coupled with a brief review of several fracture theories available in cited references, along with many color images and figures. Dynamic fracture mechanics is included through the field of fatigue and Charpy impact testing. Explains computational and engineering approaches for solving crack-related problems using straightforward mathematics that facilitate comprehension of the physical meaning of crack growth processes; Expands computational understandin...

  3. Engineering mechanics

    CERN Document Server

    Gross, Dietmar; Schröder, Jörg; Wall, Wolfgang A; Rajapakse, Nimal

    Statics is the first volume of a three-volume textbook on Engineering Mechanics. The authors, using a time-honoured straightforward and flexible approach, present the basic concepts and principles of mechanics in the clearest and simplest form possible to advanced undergraduate engineering students of various disciplines and different educational backgrounds. An important objective of this book is to develop problem solving skills in a systematic manner. Another aim of this volume is to provide engineering students as well as practising engineers with a solid foundation to help them bridge the gap between undergraduate studies on the one hand and advanced courses on mechanics and/or practical engineering problems on the other. The book contains numerous examples, along with their complete solutions. Emphasis is placed upon student participation in problem solving. The contents of the book correspond to the topics normally covered in courses on basic engineering mechanics at universities and colleges. Now in i...

  4. Precision mechanics

    CERN Document Server

    Kittell, David

    1989-01-01

    David Kittell, the father of the discipline, Precision Mechanics, shares the foundation of this science with you in his highly practical and fun to read book, Precision Mechanics. Based on his highly acclaimed course by the same name, first taught at the Perkin-Elmer Technical institute in Norwalk, Connecticut, and later as a short course offered in such places as Bell Labs, SPIE, IEEE, NASA, and several national labs, you will find this book relevant and immediately useful.

  5. Development of a Numerical Model of Hypervelocity Impact into a Pressurized Composite Overwrapped Pressure Vessel

    Science.gov (United States)

    Garcia, M. A.; Davis, B. A.; Miller, J. E.

    2017-01-01

    As the outlook for space exploration becomes more ambitious and spacecraft travel deeper into space than ever before, it is increasingly important that propulsion systems perform reliably within the space environment. The increased reliability compels designers to increase design margin at the expense of system mass, which contrasts with the need to limit vehicle mass to maximize payload. Such are the factors that motivate the integration of high specific strength composite materials in the construction of pressure vessels commonly referred to as composite overwrapped pressure vessels (COPV). The COPV consists of a metallic liner for the inner shell of the COPV that is stiff, negates fluid permeation and serves as the anchor for composite laminates or filaments, but the liner itself cannot contain the stresses from the pressurant it contains. The compo-site-fiber reinforced polymer (CFRP) is wound around the liner using a combination of hoop (circumferential) and helical orientations. Careful consideration of wrap orientation allows the composite to evenly bear structural loading and creates the COPV's characteristic high strength to weight ratio. As the CFRP overwrap carries most of the stresses induced by pressurization, damage to the overwrap can affect mission duration, mission success and potentially cause loss-of-vehicle/loss-of-crew. For this reason, it is critical to establish a fundamental understanding of the mechanisms involved in the failure of a stressed composite such as that of the COPV. One of the greatest external threats to the integrity of a spacecraft's COPV is an impact from the meteoroid and orbital debris environments (MMOD). These impacts, even from submillimeter particles, generate extremely high stress states in the CFRP that can damage numerous fibers. As a result of this possibility, initial assumptions in survivability analysis for some human-rated NASA space-craft have assumed that any alteration of the vessel due to impact is

  6. Gauge concepts in theoretical applied physics

    Science.gov (United States)

    Tan, Seng Ghee; Jalil, Mansoor B. A.

    2016-01-01

    Gauge concept evolves in the course of nearly one century from Faraday’s rather obscure electrotonic state of matter to the physically significant Yang-Mills that underpin today’s standard model. As gauge theories improve, links are established with modern observations, e.g. in the Aharonov-Bohm effect, the Pancharatnam-Berry’s phase, superconductivity, and quantum Hall effects. In this century, emergent gauge theory is formulated in numerous fields of applied physics like topological insulators, spintronics, and graphene. We will show in this paper the application of gauge theory in two particularly useful spin-based phenomena, namely the spin orbit spin torque and the spin Hall effect. These are important fields of study in the engineering community due to great commercial interest in the technology of magnetic memory (MRAM), and magnetic field sensors. Both spin orbit torque and spin Hall perform magnetic switching at low power and high speed. Furthermore, spin Hall is also a promising source of pure spin current, as well as a reliable form of detection mechanism for the magnetic state of a material.

  7. Fusion programs in applied plasma physics

    Energy Technology Data Exchange (ETDEWEB)

    1992-02-01

    The objectives of the theoretical science program are: To support the interpretation of present experiments and predict the outcome of future planned experiments; to improve on existing models and codes and validate against experimental results; and to conduct theoretical physics development of advanced concepts with applications for DIII-D and future devices. Major accomplishments in FY91 include the corroboration between theory and experiment on MHD behavior in the second stable regime of operation on DIII-D, and the frequency and mode structure of toroidal Alfven eigenmodes in high beta, shaped plasmas. We have made significant advances in the development of the gyro-Landau fluid approach to turbulence simulation which more accurately models kinetic drive and damping mechanisms. Several theoretical models to explain the bifurcation phenomenon in L- to H-mode transition were proposed providing the theoretical basis for future experimental verification. The capabilities of new rf codes have been upgraded in response to the expanding needs of the rf experiments. Codes are being employed to plan for a fully non-inductive current drive experiment in a high beta, enhanced confinement regime. GA's experimental effort in Applied Physics encompasses two advanced diagnostics essential for the operation of future fusion experiments: Alpha particle diagnostic, and current and density profile diagnostics. This paper discusses research in all these topics.

  8. Applied Materials taas investorite huviorbiidis / Erlend Zirk

    Index Scriptorium Estoniae

    Zirk, Erlend

    2006-01-01

    Ilmunud ka: Delovõje Vedomosti 29. nov. lk. 33. Protsessorite tootmisseadmete tootja Applied Materials on pärast 2000. aasta börsikrahhi taas investorite huviorbiiti jõudmas. Diagramm: Applied Materialsi aktsia

  9. Applied Psycholinguistics--Amphibian or Phantom?

    Science.gov (United States)

    Titone, Renzo

    1975-01-01

    A tentative classification of internal departments of psycholinguistics is suggested and a list of applied fields is presented. Applied psycholinguistics is not seen here to have a right to scientific independence. (SCC)

  10. Applied Materials taas investorite huviorbiidis / Erlend Zirk

    Index Scriptorium Estoniae

    Zirk, Erlend

    2006-01-01

    Ilmunud ka: Delovõje Vedomosti 29. nov. lk. 33. Protsessorite tootmisseadmete tootja Applied Materials on pärast 2000. aasta börsikrahhi taas investorite huviorbiiti jõudmas. Diagramm: Applied Materialsi aktsia

  11. Applied technology section. Monthly report, December 1993

    Energy Technology Data Exchange (ETDEWEB)

    Buckner, M.R.

    1994-01-28

    This monthly report contains abstracts of the progress made in various projects from the applied technology section at the Savannah River Plant. Research areas include engineering modeling and simulation, applied physics, experimental thermal hydraulics, and packaging and transportation.

  12. Applied Parallel Computing Industrial Computation and Optimization

    DEFF Research Database (Denmark)

    Madsen, Kaj; NA NA NA Olesen, Dorte

    Proceedings and the Third International Workshop on Applied Parallel Computing in Industrial Problems and Optimization (PARA96)......Proceedings and the Third International Workshop on Applied Parallel Computing in Industrial Problems and Optimization (PARA96)...

  13. Continuum mechanics the birthplace of mathematical models

    CERN Document Server

    Allen, Myron B

    2015-01-01

    Continuum mechanics is a standard course in many graduate programs in engineering and applied mathematics as it provides the foundations for the various differential equations and mathematical models that are encountered in fluid mechanics, solid mechanics, and heat transfer.  This book successfully makes the topic more accessible to advanced undergraduate mathematics majors by aligning the mathematical notation and language with related courses in multivariable calculus, linear algebra, and differential equations; making connections with other areas of applied mathematics where parial differe

  14. Quantum mechanics

    CERN Document Server

    Fitzpatrick, Richard

    2015-01-01

    Quantum mechanics was developed during the first few decades of the twentieth century via a series of inspired guesses made by various physicists, including Planck, Einstein, Bohr, Schroedinger, Heisenberg, Pauli, and Dirac. All these scientists were trying to construct a self-consistent theory of microscopic dynamics that was compatible with experimental observations. The purpose of this book is to present quantum mechanics in a clear, concise, and systematic fashion, starting from the fundamental postulates, and developing the theory in as logical manner as possible. Topics covered in the book include the fundamental postulates of quantum mechanics, angular momentum, time-dependent and time-dependent perturbation theory, scattering theory, identical particles, and relativistic electron theory.

  15. Analytical mechanics

    CERN Document Server

    Helrich, Carl S

    2017-01-01

    This advanced undergraduate textbook begins with the Lagrangian formulation of Analytical Mechanics and then passes directly to the Hamiltonian formulation and the canonical equations, with constraints incorporated through Lagrange multipliers. Hamilton's Principle and the canonical equations remain the basis of the remainder of the text. Topics considered for applications include small oscillations, motion in electric and magnetic fields, and rigid body dynamics. The Hamilton-Jacobi approach is developed with special attention to the canonical transformation in order to provide a smooth and logical transition into the study of complex and chaotic systems. Finally the text has a careful treatment of relativistic mechanics and the requirement of Lorentz invariance. The text is enriched with an outline of the history of mechanics, which particularly outlines the importance of the work of Euler, Lagrange, Hamilton and Jacobi. Numerous exercises with solutions support the exceptionally clear and concise treatment...

  16. Quantum mechanics

    CERN Document Server

    Ghosh, P K

    2014-01-01

    Quantum mechanics, designed for advanced undergraduate and graduate students of physics, mathematics and chemistry, provides a concise yet self-contained introduction to the formal framework of quantum mechanics, its application to physical problems and the interpretation of the theory. Starting with a review of some of the necessary mathematics, the basic concepts are carefully developed in the text. After building a general formalism, detailed treatment of the standard material - the harmonic oscillator, the hydrogen atom, angular momentum theory, symmetry transformations, approximation methods, identical particle and many-particle systems, and scattering theory - is presented. The concluding chapter discusses the interpretation of quantum mechanics. Some of the important topics discussed in the book are the rigged Hilbert space, deformation quantization, path integrals, coherent states, geometric phases, decoherene, etc. This book is characterized by clarity and coherence of presentation.

  17. Wave Mechanics or Wave Statistical Mechanics

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    By comparison between equations of motion of geometrical optics and that of classical statistical mechanics, this paper finds that there should be an analogy between geometrical optics and classical statistical mechanics instead of geometrical mechanics and classical mechanics. Furthermore, by comparison between the classical limit of quantum mechanics and classical statistical mechanics, it finds that classical limit of quantum mechanics is classical statistical mechanics not classical mechanics, hence it demonstrates that quantum mechanics is a natural generalization of classical statistical mechanics instead of classical mechanics. Thence quantum mechanics in its true appearance is a wave statistical mechanics instead of a wave mechanics.

  18. Computational mechanics

    Energy Technology Data Exchange (ETDEWEB)

    Raboin, P J

    1998-01-01

    The Computational Mechanics thrust area is a vital and growing facet of the Mechanical Engineering Department at Lawrence Livermore National Laboratory (LLNL). This work supports the development of computational analysis tools in the areas of structural mechanics and heat transfer. Over 75 analysts depend on thrust area-supported software running on a variety of computing platforms to meet the demands of LLNL programs. Interactions with the Department of Defense (DOD) High Performance Computing and Modernization Program and the Defense Special Weapons Agency are of special importance as they support our ParaDyn project in its development of new parallel capabilities for DYNA3D. Working with DOD customers has been invaluable to driving this technology in directions mutually beneficial to the Department of Energy. Other projects associated with the Computational Mechanics thrust area include work with the Partnership for a New Generation Vehicle (PNGV) for ''Springback Predictability'' and with the Federal Aviation Administration (FAA) for the ''Development of Methodologies for Evaluating Containment and Mitigation of Uncontained Engine Debris.'' In this report for FY-97, there are five articles detailing three code development activities and two projects that synthesized new code capabilities with new analytic research in damage/failure and biomechanics. The article this year are: (1) Energy- and Momentum-Conserving Rigid-Body Contact for NIKE3D and DYNA3D; (2) Computational Modeling of Prosthetics: A New Approach to Implant Design; (3) Characterization of Laser-Induced Mechanical Failure Damage of Optical Components; (4) Parallel Algorithm Research for Solid Mechanics Applications Using Finite Element Analysis; and (5) An Accurate One-Step Elasto-Plasticity Algorithm for Shell Elements in DYNA3D.

  19. Mechanical instability

    CERN Document Server

    Krysinski, Tomasz

    2013-01-01

    This book presents a study of the stability of mechanical systems, i.e. their free response when they are removed from their position of equilibrium after a temporary disturbance. After reviewing the main analytical methods of the dynamical stability of systems, it highlights the fundamental difference in nature between the phenomena of forced resonance vibration of mechanical systems subjected to an imposed excitation and instabilities that characterize their free response. It specifically develops instabilities arising from the rotor-structure coupling, instability of control systems, the se

  20. Mechanical seals

    CERN Document Server

    Mayer, E

    1977-01-01

    Mechanical Seals, Third Edition is a source of practical information on the design and use of mechanical seals. Topics range from design fundamentals and test rigs to leakage, wear, friction and power, reliability, and special designs. This text is comprised of nine chapters; the first of which gives a general overview of seals, including various types of seals and their applications. Attention then turns to the fundamentals of seal design, with emphasis on six requirements that must be considered: sealing effectiveness, length of life, reliability, power consumption, space requirements, and c

  1. Soil mechanics

    Science.gov (United States)

    Mitchell, J. K.; Carrier, W. D., III; Houston, W. N.; Scott, R. F.; Bromwell, L. G.; Durgunoglu, H. T.; Hovland, H. J.; Treadwell, D. D.; Costes, N. C.

    1972-01-01

    Preliminary results are presented of an investigation of the physical and mechanical properties of lunar soil on the Descartes slopes, and the Cayley Plains in the vicinity of the LM for Apollo 16. The soil mechanics data were derived form (1) crew commentary and debriefings, (2) television, (3) lunar surface photography, (4) performance data and observations of interactions between soil and lunar roving vehicle, (5) drive-tube and deep drill samples, (6) sample characteristics, and (7) measurements using the SRP. The general characteristics, stratigraphy and variability are described along with the core samples, penetrometer test results, density, porosity and strength.

  2. Critical and Alternative Directions in Applied Linguistics

    Science.gov (United States)

    Pennycook, Alastair

    2010-01-01

    Critical directions in applied linguistics can be understood in various ways. The term "critical" as it has been used in "critical applied linguistics," "critical discourse analysis," "critical literacy" and so forth, is now embedded as part of applied linguistic work, adding an overt focus on questions of power and inequality to discourse…

  3. Western Perspectives in Applied Linguistics in Africa

    Science.gov (United States)

    Makoni, Sinfree; Meinhof, Ulrike H.

    2004-01-01

    The aim of this article is to analyze the nature of the historical and contemporary social contexts within which applied linguistics in Africa emerged, and is currently practiced. The article examines the challenges "local" applied Linguistics in Africa is confronted with as it tries to amplify applied linguistic programs emanating from…

  4. Polymer composite principles applied to hair styling gels.

    Science.gov (United States)

    Wade Rafferty, Denise; Zellia, Joseph; Hasman, Daniel; Mullay, John

    2008-01-01

    A novel approach is taken to understand the mechanical performance of fixative-treated hair tresses. Polymer composite principles are applied to explain the performance. Examples are given for polyacrylate-2 crosspolymer that show that the choice of neutralizer affects the film properties of anionic acrylic polymers by plasticization or by hardening through ionic (physical) crosslinking. The effect of these changes in the polymer film on the composite properties was determined by mechanical stiffness and high-humidity curl retention testing. It is shown that both adhesion to the hair and polymer cohesion are important in determining fixative polymer performance. The implications of the results for the formulation of fixative systems are discussed.

  5. Fluid Mechanics.

    Science.gov (United States)

    Drazin, Philip

    1987-01-01

    Outlines the contents of Volume II of "Principia" by Sir Isaac Newton. Reviews the contributions of subsequent scientists to the physics of fluid dynamics. Discusses the treatment of fluid mechanics in physics curricula. Highlights a few of the problems of modern research in fluid dynamics. Shows that problems still remain. (CW)

  6. Classical Mechanics

    OpenAIRE

    Gallavotti, Giovanni

    2012-01-01

    This is the English version of a friendly graduate course on Classical Mechanics, containing about 80% of the material I covered during the January-June 1999 semester at IFUG in the Mexican city of Leon. For the Spanish version, see physics/9906066

  7. Fluid Mechanics.

    Science.gov (United States)

    Drazin, Philip

    1987-01-01

    Outlines the contents of Volume II of "Principia" by Sir Isaac Newton. Reviews the contributions of subsequent scientists to the physics of fluid dynamics. Discusses the treatment of fluid mechanics in physics curricula. Highlights a few of the problems of modern research in fluid dynamics. Shows that problems still remain. (CW)

  8. Towards quantitative measures in applied ontology

    CERN Document Server

    Hoehndorf, Robert; Gkoutos, Georgios V

    2012-01-01

    Applied ontology is a relatively new field which aims to apply theories and methods from diverse disciplines such as philosophy, cognitive science, linguistics and formal logics to perform or improve domain-specific tasks. To support the development of effective research methodologies for applied ontology, we critically discuss the question how its research results should be evaluated. We propose that results in applied ontology must be evaluated within their domain of application, based on some ontology-based task within the domain, and discuss quantitative measures which would facilitate the objective evaluation and comparison of research results in applied ontology.

  9. Conventional mechanical ventilation

    Directory of Open Access Journals (Sweden)

    Tobias Joseph

    2010-01-01

    Full Text Available The provision of mechanical ventilation for the support of infants and children with respiratory failure or insufficiency is one of the most common techniques that are performed in the Pediatric Intensive Care Unit (PICU. Despite its widespread application in the PICUs of the 21st century, before the 1930s, respiratory failure was uniformly fatal due to the lack of equipment and techniques for airway management and ventilatory support. The operating rooms of the 1950s and 1960s provided the arena for the development of the manual skills and the refinement of the equipment needed for airway management, which subsequently led to the more widespread use of endotracheal intubation thereby ushering in the era of positive pressure ventilation. Although there seems to be an ever increasing complexity in the techniques of mechanical ventilation, its successful use in the PICU should be guided by the basic principles of gas exchange and the physiology of respiratory function. With an understanding of these key concepts and the use of basic concepts of mechanical ventilation, this technique can be successfully applied in both the PICU and the operating room. This article reviews the basic physiology of gas exchange, principles of pulmonary physiology, and the concepts of mechanical ventilation to provide an overview of the knowledge required for the provision of conventional mechanical ventilation in various clinical arenas.

  10. Applied solid state science advances in materials and device research

    CERN Document Server

    Wolfe, Raymond

    2013-01-01

    Applied Solid State Science: Advances in Materials and Device Research, Volume 1 presents articles about junction electroluminescence; metal-insulator-semiconductor (MIS) physics; ion implantation in semiconductors; and electron transport through insulating thin films. The book describes the basic physics of carrier injection; energy transfer and recombination mechanisms; state of the art efficiencies; and future prospects for light emitting diodes. The text then discusses solid state spectroscopy, which is the pair spectra observed in gallium phosphide photoluminescence. The extensive studies

  11. Brief Introduction to Chinese Optics and Applied Optics Abstracts

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The Chinese Optics and Applied Optics Abstracts, sponsored by the Documentation and Information Center of the Chinese Academy of Sciences,the Optical Information Network of the Chinese Academy of Sciences and the Changchun Institute of Optics,Fine Mechanics and Physics of the Chinese Academy of Sciences,is one of the series of science and technology indexing periodicals published by the Chinese Academy of Sciences.

  12. Brief Introduction to Chinese Optics and Applied Optics Abstracts

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The Chinese Optics and Applied Optics Abstracts, sponsored by the Documentation and Information Center of the Chinese Academy of Sciences, the Optical Information Network of the Chinese Academy of Sciences and the Changchun Institute of Optics,Fine Mechanics and Physics of the Chinese Academy of Sciences,is one of the series of science and technology indexing periodicals published by the Chinese Academy of Sciences.

  13. Shape-Memory-Alloy Release Mechanism

    Science.gov (United States)

    Mckinnis, Darin

    1993-01-01

    Release-nut mechanism activated by electric current applied to shape-memory alloy. Separates attached objects quickly by remote control. Does not create hazard or cause damage. Shape-memory release-nut mechanism unaffected by moisture or vacuum. Requires sustained current lasting 5 seconds or longer, and insensitive to electromagnetic interference. Mechanism can be reused.

  14. Applied RCM2 Algorithms Based on Statistical Methods

    Institute of Scientific and Technical Information of China (English)

    Fausto Pedro García Márquez; Diego J. Pedregal

    2007-01-01

    The main purpose of this paper is to implement a system capable of detecting faults in railway point mechanisms. This is achieved by developing an algorithm that takes advantage of three empirical criteria simultaneously capable of detecting faults from records of measurements of force against time. The system is dynamic in several respects: the base reference data is computed using all the curves free from faults as they are encountered in the experimental data; the algorithm that uses the three criteria simultaneously may be applied in on-line situations as each new data point becomes available; and recursive algorithms are applied to filter noise from the raw data in an automatic way. Encouraging results are found in practice when the system is applied to a number of experiments carried out by an industrial sponsor.

  15. Methods of applied mathematics with a software overview

    CERN Document Server

    Davis, Jon H

    2016-01-01

    This textbook, now in its second edition, provides students with a firm grasp of the fundamental notions and techniques of applied mathematics as well as the software skills to implement them. The text emphasizes the computational aspects of problem solving as well as the limitations and implicit assumptions inherent in the formal methods. Readers are also given a sense of the wide variety of problems in which the presented techniques are useful. Broadly organized around the theme of applied Fourier analysis, the treatment covers classical applications in partial differential equations and boundary value problems, and a substantial number of topics associated with Laplace, Fourier, and discrete transform theories. Some advanced topics are explored in the final chapters such as short-time Fourier analysis and geometrically based transforms applicable to boundary value problems. The topics covered are useful in a variety of applied fields such as continuum mechanics, mathematical physics, control theory, and si...

  16. International Conference on Applied Sciences (ICAS2013)

    Science.gov (United States)

    Lemle, Ludovic Dan; Jiang, Yiwen

    2014-03-01

    The International Conference on Applied Sciences (ICAS2013) took place in Wuhan, P R China from 26-27 October 2013 at the Military Economics Academy. The conference is regularly organized, alternately in Romania and in P R China, by ''Politehnica'' University of Timişoara, Romania, and Military Economics Academy of Wuhan, P R China, with the aim to serve as a platform for the exchange of information between various areas of applied sciences, and to promote the communication between the scientists of different nations, countries and continents. The conference has been organized for the first time in 15-16 June 2012 at the Engineering Faculty of Hunedoara, Romania. The topics of the conference covered a comprehensive spectrum of issues: Economical sciences Engineering sciences Fundamental sciences Medical sciences The conference gathered qualified researchers whose expertise can be used to develop new engineering knowledge that has applicability potential in economics, defense, medicine, etc. The number of registered participants was nearly 90 from 5 countries. During the two days of the conference 4 invited and 36 oral talks were delivered. A few of the speakers deserve a special mention: Mircea Octavian Popoviciu, Academy of Romanian Scientist — Timişoara Branch, Correlations between mechanical properties and cavitation erosion resistance for stainless steels with 12% chromium and variable contents of nickel; Carmen Eleonora Hărău, ''Politehnica'' University of Timişoara, SWOT analysis of Romania's integration in EU; Ding Hui, Military Economics Academy of Wuhan, Design and engineering analysis of material procurement mobile operation platform; Serban Rosu, University of Medicine and Pharmacy ''Victor Babeş'' Timişoara, Cervical and facial infections — a real life threat, among others. Based on the work presented at the conference, 14 selected papers are included in this volume of IOP Conference Series: Materials Science and Engineering. These papers

  17. 探讨机械通气下应用肌松剂治疗重型新生儿破伤风的疗效%Curative Effect Under Mechanical Ventilation Applied Muscle Relaxants for the Treatment of Severe Neonatal Tetanus

    Institute of Scientific and Technical Information of China (English)

    许英

    2015-01-01

    目的:探讨机械通气下应用肌松剂治疗对重型新生儿破伤风的疗效。方法选择30例重型破伤风新生儿,随机分为观察组和对照组各15例。对照组进行综合治疗,观察组于机械通气下应用肌松剂治疗。结果观察组无患者死亡,死亡率低于对照组53.3%(P<0.05);观察组并发症发生情况优于对照组(P<0.05)。结论对重型破伤风新生儿于机械通气下应用肌松剂治疗,有助于改善患儿并发症的产生,降低重型新生儿破伤风的死亡率。%Objective To study the application of nondepolarizing agent under mechanical ventilation in treatment of severe neonatal tetanus.Methods 30 cases of heavy neonatal tetanus,were randomly divided into observation group and control group(n=15). Comprehensive treatment for control group and observation group used muscle relaxants under mechanical ventilation treatment.Results Observation group had no patients died,was lower than the control group 53.3%(P< 0.05). Observation group complications situation is better than that of control group(P< 0.05).Conclusion The heavy neonatal tetanus under mechanical ventilation and muscle relaxants treatment help children improve complications,reduce the mortality of severe neonatal tetanus.

  18. Prestressing Shock Resistant Mechanical Components and Mechanisms Made from Hard, Superelastic Materials

    Science.gov (United States)

    DellaCorte, Christopher (Inventor)

    2014-01-01

    A method and an apparatus confer full superelastic properties to the active surface of a mechanical component constructed of a superelastic material prior to service. A compressive load is applied to the active surface of the mechanical component followed by removing the compressive load from the active surface whereby substantially all load strain is recoverable after applying and removing of subsequent compressive loads.

  19. Statistical mechanics

    CERN Document Server

    Jana, Madhusudan

    2015-01-01

    Statistical mechanics is self sufficient, written in a lucid manner, keeping in mind the exam system of the universities. Need of study this subject and its relation to Thermodynamics is discussed in detail. Starting from Liouville theorem gradually, the Statistical Mechanics is developed thoroughly. All three types of Statistical distribution functions are derived separately with their periphery of applications and limitations. Non-interacting ideal Bose gas and Fermi gas are discussed thoroughly. Properties of Liquid He-II and the corresponding models have been depicted. White dwarfs and condensed matter physics, transport phenomenon - thermal and electrical conductivity, Hall effect, Magneto resistance, viscosity, diffusion, etc. are discussed. Basic understanding of Ising model is given to explain the phase transition. The book ends with a detailed coverage to the method of ensembles (namely Microcanonical, canonical and grand canonical) and their applications. Various numerical and conceptual problems ar...

  20. Statistical mechanics

    CERN Document Server

    Schwabl, Franz

    2006-01-01

    The completely revised new edition of the classical book on Statistical Mechanics covers the basic concepts of equilibrium and non-equilibrium statistical physics. In addition to a deductive approach to equilibrium statistics and thermodynamics based on a single hypothesis - the form of the microcanonical density matrix - this book treats the most important elements of non-equilibrium phenomena. Intermediate calculations are presented in complete detail. Problems at the end of each chapter help students to consolidate their understanding of the material. Beyond the fundamentals, this text demonstrates the breadth of the field and its great variety of applications. Modern areas such as renormalization group theory, percolation, stochastic equations of motion and their applications to critical dynamics, kinetic theories, as well as fundamental considerations of irreversibility, are discussed. The text will be useful for advanced students of physics and other natural sciences; a basic knowledge of quantum mechan...

  1. Mechanical engineering

    CERN Document Server

    Darbyshire, Alan

    2010-01-01

    Alan Darbyshire's best-selling text book provides five-star high quality content to a potential audience of 13,000 engineering students. It explains the most popular specialist units of the Mechanical Engineering, Manufacturing Engineering and Operations & Maintenance Engineering pathways of the new 2010 BTEC National Engineering syllabus. This challenging textbook also features contributions from specialist lecturers, ensuring that no stone is left unturned.

  2. Mechanical graphene

    Science.gov (United States)

    Socolar, Joshua E. S.; Lubensky, Tom C.; Kane, Charles L.

    2017-02-01

    We present a model of a mechanical system with a vibrational mode spectrum identical to the spectrum of electronic excitations in a tight-binding model of graphene. The model consists of point masses connected by elastic couplings, called ‘tri-bonds’, that implement certain three-body interactions, which can be tuned by varying parameters that correspond to the relative hopping amplitudes on the different bond directions in graphene. In the mechanical model, this is accomplished by varying the location of a pivot point that determines the allowed rigid rotations of a single tri-bond. The infinite system constitutes a Maxwell lattice, with the number of degrees of freedom equal to the number of constraints imposed by the tri-bonds. We construct the equilibrium and compatibility matrices and analyze the model’s phase diagram, which includes spectra with Weyl points for some placements of the pivot and topologically polarized phases for others. We then discuss the edge modes and associated states of self stress for strips cut from the periodic lattice. Finally, we suggest a physical realization of the tri-bond, which allows access to parameter regimes not available to experiments on (strained) graphene and may be used to create other two-dimensional mechanical metamaterials with different spectral features.

  3. 应用型独立学院机械工程专业《机械产品构造》课程的改革探索与实践%Exploration and Practice on the Reform of Machinery Product Structure Curriculum of Mechanical Engineering Major in Applied Independent College

    Institute of Scientific and Technical Information of China (English)

    徐杭

    2013-01-01

    In order to improve the teaching effect of the mechanical engineering major in independent institute, this paper proposed the practice teaching and reform method of Mechanical Product Structure curriculum. Through this method, the students can get the most and latest knowledge in the least time, and it can improve students' ability of combining theory with practice, and closely contact with the practical ability in actual production and living, and has got a good teaching effect.%  为了提高独立学院机械工程专业教学的效果,提出了机械工程专业中针对《机械产品构造》的课程实践教学和改革方法。该方法使学生在最少的时间内获得最多、最新的知识,提高学生理论联系实际,并紧密联系实际生产生活的实践能力,在实际教学中获得了良好的教学效果。

  4. Statistical mechanics of learning

    CERN Document Server

    Engel, Andreas

    2001-01-01

    The effort to build machines that are able to learn and undertake tasks such as datamining, image processing and pattern recognition has led to the development of artificial neural networks in which learning from examples may be described and understood. The contribution to this subject made over the past decade by researchers applying the techniques of statistical mechanics is the subject of this book. The authors provide a coherent account of various important concepts and techniques that are currently only found scattered in papers, supplement this with background material in mathematics and physics, and include many examples and exercises.

  5. Imaging the Antikythera Mechanism

    Energy Technology Data Exchange (ETDEWEB)

    Malzbender, Thomas

    2012-02-10

    In 1900, a party of sponge divers chanced on the wreck of a Roman merchant vessel between Crete and mainland Greece. It was found to contain numerous ancient Greek treasures, among them a mysterious lump of clay that split open to reveal ‘mathematical gears’ as it dried out. This object is now known as the Antikythera Mechanism, one of the most enlightening artifacts in terms of revealing the advanced nature of ancient Greek science and technology. In 2005 we travelled to the National Archeological Museum in Athens to apply our Reflectance Imaging methods to the mechanism in the hopes of revealing ancient writing on the device. We were successful, and along with the results of Microfocus CT imaging, epigraphers were able to decipher 3000 characters.

  6. Mechanisms of intergranular fracture

    Energy Technology Data Exchange (ETDEWEB)

    Farkas, D. [Virginia Polytechnic Inst. and State Univ., Blacksburg, VA (United States). Dept. of Materials Science and Engineering

    1999-08-01

    The authors present a study of the atomistic mechanisms of crack propagation along grain boundaries in metals and alloys. The failure behavior showing cleavage crack growth and/or crack-tip dislocation emission is demonstrated using atomistic simulations for an embedded-atom model. The simulations follow the quasi-equilibrium growth of a crack as the stress intensity applied increases. Dislocations emitted from crack tips normally blunt the crack and inhibit cleavage, inducing ductile behavior. When the emitted dislocations stay near the crack tip (sessile dislocations), they do blunt the crack but brittle cleavage can occur after the emission of a sufficient number of dislocations. The fracture process occurs as a combination of dislocation emission/micro-cleavage portions that are controlled by the local atomistic structure of the grain boundary. The grain boundary is shown to be a region where dislocation emission is easier, a mechanism that competes with the lower cohesive strength of the boundary region.

  7. New quantum mechanical model

    Institute of Scientific and Technical Information of China (English)

    吴宁; 阮图南

    1996-01-01

    A quantum mechanical model with one bosonic degree of freedom is discussed in detail. Conventionally, when a quantum mechanical model is constructed, one must know the corresponding classical model. And by applying the correspondence between the classical Poisson brackets and the canonical commutator, the canonical quantization condition can be obtained. In the quantum model, study of the corresponding classical model is needed first. In this model, the Lagrangian is an operator gauge invariant. After localization, in order to keep gauge invariance, the operator gauge potential must be introduced. The Eular-Lagrange equation of motion of the dynamical argument gives the usual operator equation of motion. And the operator gauge potential just gjves a constraint. This constraint is just the usual canonical quantization condition.

  8. Eficácia de herbicidas aplicados em diferentes épocas sobre B. pilosa e I. quamoclit em área de cana-de-açúcar colhida mecanicamente Effectiveness of herbicides applied at different times on B. pilosa and I. quamoclit in mechanically harvested sugarcane area

    Directory of Open Access Journals (Sweden)

    P.A. Monquero

    2009-01-01

    Full Text Available O objetivo deste trabalho foi estudar a eficácia agronômica de herbicidas utilizados em áreas no sistema da colheita da cana crua, visando o controle de Ipomoea quamoclit e Bidens pilosa em lavoura comercial de cana-soca, com solo de textura argilosa, no município de Araras-SP. Os herbicidas (em g ha-1 utilizados foram trifloxysulfuron-sodium + ametryn (27,77 + 1.097 e 37 + 1.463, mesotrione (120 e 192, mesotrione + ametryn (120 + 1.500, mesotrione + trifloxysulfuron-sodium + ametryn [120 + (27,77 + 1.097], trifloxysulfuron-sodium + ametryn + diuron + hexazinone [(27,77 + 1.097 + (702 + 198] e metribuzin (1.920. Os herbicidas foram aplicados em pré-emergência das plantas daninhas sobre a palha de cana-de-açúcar; em pré-emergência das plantas daninhas sobre o solo e, em seguida, coberto com palha; e em pós-emergência das plantas daninhas, em jato dirigido nas entrelinhas da cana-de-açúcar. Eles sempre foram aplicados em pós-emergência da cultura, a qual apresentava aproximadamente 30 cm de altura. Os resultados permitiram concluir que a aplicação dos herbicidas sobre a palha de cana-de-açúcar e em pré-emergência das plantas daninhas alterou a eficácia do mesotrione a 120 g, do trifloxysulfuron-sodium + ametryn (27,77 + 1.097 e das misturas de mesotrine + ametryn e mesotrione + (trifloxysulfuron-sodium + ametryn. Os herbicidas metribuzin e (trifloxysulfuron-sodium + ametryn + (diuron + hexazinone foram eficazes no controle das espécies daninhas, independentemente da forma de aplicação. A espécie B. pilosa foi a mais suscetível aos herbicidas e ao sistema de colheita cana-crua, ou seja, a palha sobre o solo inibiu o seu estabelecimento. Os herbicidas aplicados em jato dirigido na entrelinha da cana-de-açúcar, em pós-emergência, foram seletivos para a cultura.This work aimed to study the agronomic efficacy of herbicides applied in raw sugarcane harvest areas, to control Ipomea quamoclit and Bidens pilosa, on a

  9. Imaging the Antikythera Mechanism

    Energy Technology Data Exchange (ETDEWEB)

    Malzbender, Tom (Hewlett Packard Laboratories)

    2011-01-12

    In 1900, a party of sponge divers chanced on the wreck of a Roman merchant vessel between Crete and mainland Greece. It was found to contain numerous ancient Greek treasures, among them a mysterious lump of clay that split open to reveal 'mathematical gears' as it dried out. This object is now known as the Antikythera Mechanism, one of the most enlightening artifacts in terms of revealing the advanced nature of ancient Greek science and technology. In 2005 we travelled to the National Archeological Museum in Athens to apply our Reflectance Imaging methods to the mechanism in the hopes of revealing ancient writing on the device. We were successful, and along with the results of Microfocus CT imaging, we are able to decipher 3000 characters compared with the original 800 known. This lead to an understanding that the device was a mechanical, astronomical computer from 150 B.C.E. capable of predicting solar and lunar eclipses along with other celestial events. This talk will overview both the imaging methods as well as what they reveal about the Antikythera Mechanism.

  10. Quantum mechanics

    CERN Document Server

    Rae, Alastair I M

    2007-01-01

    PREFACESINTRODUCTION The Photoelectric Effect The Compton Effect Line Spectra and Atomic Structure De Broglie Waves Wave-Particle Duality The Rest of This Book THE ONE-DIMENSIONAL SCHRÖDINGER EQUATIONS The Time-Dependent Schrödinger Equation The Time-Independent Schrödinger Equation Boundary ConditionsThe Infinite Square Well The Finite Square Well Quantum Mechanical Tunneling The Harmonic Oscillator THE THREE-DIMENSIONAL SCHRÖDINGER EQUATIONS The Wave Equations Separation in Cartesian Coordinates Separation in Spherical Polar Coordinates The Hydrogenic Atom THE BASIC POSTULATES OF QUANTUM MEC

  11. Quantum mechanics

    CERN Document Server

    Mandl, Franz

    1992-01-01

    The Manchester Physics Series General Editors: D. J. Sandiford; F. Mandl; A. C. Phillips Department of Physics and Astronomy, University of Manchester Properties of Matter B. H. Flowers and E. Mendoza Optics Second Edition F. G. Smith and J. H. Thomson Statistical Physics Second Edition F. Mandl Electromagnetism Second Edition I. S. Grant and W. R. Phillips Statistics R. J. Barlow Solid State Physics Second Edition J. R. Hook and H. E. Hall Quantum Mechanics F. Mandl Particle Physics Second Edition B. R. Martin and G. Shaw The Physics of Stars Second Edition A. C. Phillips Computing for Scient

  12. Quantum mechanics

    CERN Document Server

    Zagoskin, Alexandre

    2015-01-01

    Written by Dr Alexandre Zagoskin, who is a Reader at Loughborough University, Quantum Mechanics: A Complete Introduction is designed to give you everything you need to succeed, all in one place. It covers the key areas that students are expected to be confident in, outlining the basics in clear jargon-free English, and then providing added-value features like summaries of key ideas, and even lists of questions you might be asked in your exam. The book uses a structure that is designed to make quantum physics as accessible as possible - by starting with its similarities to Newtonian physics, ra

  13. Statistical mechanics

    CERN Document Server

    Sheffield, Scott

    2009-01-01

    In recent years, statistical mechanics has been increasingly recognized as a central domain of mathematics. Major developments include the Schramm-Loewner evolution, which describes two-dimensional phase transitions, random matrix theory, renormalization group theory and the fluctuations of random surfaces described by dimers. The lectures contained in this volume present an introduction to recent mathematical progress in these fields. They are designed for graduate students in mathematics with a strong background in analysis and probability. This book will be of particular interest to graduate students and researchers interested in modern aspects of probability, conformal field theory, percolation, random matrices and stochastic differential equations.

  14. Quantum Mechanics of Extended Objects

    CERN Document Server

    Sastry, R R

    2000-01-01

    We propose a quantum mechanics of extended objects that accounts for the finite extent of a particle defined via its Compton wavelength. The Hilbert space representation theory of such a quantum mechanics is presented and this representation is used to demonstrate the quantization of spacetime. The quantum mechanics of extended objects is then applied to two paradigm examples, the fuzzy (extended object) harmonic oscillator and the Yukawa potential. In the second example the phenomenological coupling constant of the $\\omega$ meson which mediates the short range and repulsive nucleon force as well as the repulsive core radius are theoretically predicted.

  15. Quantum mechanics using Fradkin's representation

    CERN Document Server

    Shajesh, K V; Milton, Kimball A.

    2005-01-01

    Fradkin's representation is a general method of attacking problems in quantum field theory, having as its basis the functional approach of Schwinger. As a pedagogical illustration of that method, we explicitly formulate it for quantum mechanics (field theory in one dimension) and apply it to the solution of Schrodinger's equation for the quantum harmonic oscillator.

  16. Aerodynamic and Mechanical System Modelling

    DEFF Research Database (Denmark)

    Jørgensen, Martin Felix

    This thesis deals with mechanical multibody-systems applied to the drivetrain of a 500 kW wind turbine. Particular focus has been on gearbox modelling of wind turbines. The main part of the present project involved programming multibody systems to investigate the connection between forces, moments...

  17. Acoustic Emission Health Monitoring of Fill Purge COPV's Used in Aerospace and Automotive Applications and Designed for Long Cycle Life

    Science.gov (United States)

    Waller, Jess

    2013-01-01

    Cumulative composite damage in composite pressure vessels (CPVs) currently is not monitored on-orbit. Consequently, hazards due to catastrophic burst before leak (BBL) or compromised CPV reliability cannot be ascertained or mitigated, posing a risk to crew and mission assurance. The energy associated with CPV rupture can be significant, especially with high pressure gases are under containment, and the energy releases can be severe enough to cause injury, death, loss of assets or mission. Dual-Use Rationale: CPVs similar to those used by NASA on ISS, for example, are finding increasing use in automotive and transportation industry applications. These CPVs generally have a nonload sharing liner and are repeatedly filled over their service lifetime, typically with hydrogen or compressed natural gas (CNG). The same structural health monitoring equipment and software developed by NASA WSTF for evaluating, in real-time, the health of NASA CPVs on ISS will be used to evaluate the health of automotive CPVs, the only differences being the type and design of the CPV, and the in-service lifetime pressure histories. HSF Need(s)/Performance Characteristic(s) Supported: 1) Enable on-board vehicle systems management for mission critical functions at destinations with > 3 second time delay 2) Enable autonomous nominal operations and FDIR for crewed and un-crewed systems 3) Reduce on-board crew time to sustain and manage vehicle by factor of 2x at destinations with > 6 second time delay (see Crew Autonomy sheet) 4) Reduce earth-based mission ops "back room engineering" requirements for distant mission support delay (see Mission Autonomy sheet)

  18. Coming of Age in Applied Linguistics.

    Science.gov (United States)

    Bialystok, Ellen

    1998-01-01

    Argues that further progress in applied linguistics and second-language acquisition will be achieved through collaboration with researchers in other fields. Three examples of research problems are provided that would profit from collaboration with applied linguists: the definition of language proficiency, the neural basis of language functioning,…

  19. Active system monitoring applied on wind turbines

    DEFF Research Database (Denmark)

    Niemann, Hans Henrik; Poulsen, Niels Kjølstad; Parbo, Henrik

    2009-01-01

    A concept for active system monitoring (ASM) applied on wind turbines is presented in this paper. The concept is based on an injection of a small periodic auxiliary signal in the system. An investigation of the signature from the auxiliary input in residual (error) signals can then be applied...

  20. Recent Developments in Applied Probability and Statistics

    CERN Document Server

    Devroye, Luc; Kohler, Michael; Korn, Ralf

    2010-01-01

    This book presents surveys on recent developments in applied probability and statistics. The contributions include topics such as nonparametric regression and density estimation, option pricing, probabilistic methods for multivariate interpolation, robust graphical modelling and stochastic differential equations. Due to its broad coverage of different topics the book offers an excellent overview of recent developments in applied probability and statistics.

  1. Applied Linguistics: The Challenge of Theory

    Science.gov (United States)

    McNamara, Tim

    2015-01-01

    Language has featured prominently in contemporary social theory, but the relevance of this fact to the concerns of Applied Linguistics, with its necessary orientation to practical issues of language in context, represents an ongoing challenge. This article supports the need for a greater engagement with theory in Applied Linguistics. It considers…

  2. Situations of Applied Psycholinguistics in China

    Institute of Scientific and Technical Information of China (English)

    陈雪

    2007-01-01

    Numerous studies related to applied psycholinguistics in China have been published in the past two decades. So the present study reviewed the situations of applied psycholinguistics and by discussing the results, existing problems are dipped and suggestions for further research are proposed.

  3. Applied Linguistics in Its Disciplinary Context

    Science.gov (United States)

    Liddicoat, Anthony J.

    2010-01-01

    Australia's current attempt to develop a process to evaluate the quality of research (Excellence in Research for Australia--ERA) places a central emphasis on the disciplinary organisation of academic work. This disciplinary focus poses particular problems for Applied Linguistics in Australia. This paper will examine Applied Linguistics in relation…

  4. Applied technology section. Monthly report, March 1994

    Energy Technology Data Exchange (ETDEWEB)

    Buckner, M.R.

    1994-04-20

    This is a monthly report giving the details on research currently being conducted at the Savannah River Technology Center. The following are areas of the research, engineering modeling and simulation, applied statistics, applied physics,experimental thermal hydraulics,and packaging and transportation.

  5. Applied Linguistics: The Challenge of Theory

    Science.gov (United States)

    McNamara, Tim

    2015-01-01

    Language has featured prominently in contemporary social theory, but the relevance of this fact to the concerns of Applied Linguistics, with its necessary orientation to practical issues of language in context, represents an ongoing challenge. This article supports the need for a greater engagement with theory in Applied Linguistics. It considers…

  6. Applied Optics Golden Anniversary commemorative reviews: introduction.

    Science.gov (United States)

    Mait, Joseph N; Mendez, Eugenio; Peyghambarian, Nasser; Poon, T-C

    2013-01-01

    Applied Optics presents three special issues to end its retrospective of Applied Optics' 50 years. The special issues are interference, interferometry, and phase; imaging, optical processing, and telecommunications; and polarization and scattering. The issues, which contain 19 commemorative reviews from some of the journal's luminaries, are summarized.

  7. Autobiographic Narratives as Data in Applied Linguistics

    Science.gov (United States)

    Pavlenko, Aneta

    2007-01-01

    In the past decade, language memoirs, linguistic autobiographies, and learners' journals and diaries have become a popular means of data collection in applied linguistics. It is not always clear however how one should go about analyzing these data. The aim of this paper is to offer a critical review of analytical frameworks applied to second…

  8. Child Participant Roles in Applied Linguistics Research

    Science.gov (United States)

    Pinter, Annamaria

    2014-01-01

    Children's status as research participants in applied linguistics has been largely overlooked even though unique methodological and ethical concerns arise in projects where children, rather than adults, are involved. This article examines the role of children as research participants in applied linguistics and discusses the limitations of…

  9. Applied Linguistics in Its Disciplinary Context

    Science.gov (United States)

    Liddicoat, Anthony J.

    2010-01-01

    Australia's current attempt to develop a process to evaluate the quality of research (Excellence in Research for Australia--ERA) places a central emphasis on the disciplinary organisation of academic work. This disciplinary focus poses particular problems for Applied Linguistics in Australia. This paper will examine Applied Linguistics in relation…

  10. Applying Information Competency to Digital Reference.

    Science.gov (United States)

    Ellis, Lisa; Francoeur, Stephen

    This paper presents a case for applying information competency (IC) standards to digital reference services at academic libraries. Practical reasons for applying standards or guidelines to e-mail and online chat reference services are given with some insight to the nature of digital reference interactions. The standards that arose from the…

  11. 32 CFR 37.1220 - Applied research.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 1 2010-07-01 2010-07-01 false Applied research. 37.1220 Section 37.1220... REGULATIONS TECHNOLOGY INVESTMENT AGREEMENTS Definitions of Terms Used in This Part § 37.1220 Applied research... technology such as new materials, devices, methods and processes. It typically is funded in...

  12. Applied Mathematics Should Be Taught Mixed.

    Science.gov (United States)

    Brown, Gary I.

    1994-01-01

    Discusses the differences between applied and pure mathematics and provides extensive history of mixed mathematics. Argues that applied mathematics should be taught allowing for speculative mathematics, which involves breaking down a given problem into simpler parts until one arrives at first principles. (ASK)

  13. Effectiveness of Investment in Applied Horticultural Research

    NARCIS (Netherlands)

    Wustman, R.; Putter, de H.; Achterbosch, T.J.; Adamicki, F.

    2005-01-01

    A study on the cost benefit analysis of applied horticultural research was carried out in two EU Member States: the Netherlands and Poland. Four crops were selected for the study; two fruit crops ¿ apple and pear and two vegetable crops ¿ carrot and onion. A developed spreadsheet model was applied t

  14. Peripherally applied opioids for postoperative pain

    DEFF Research Database (Denmark)

    Nielsen, B N; Henneberg, S W; Schmiegelow, K;

    2015-01-01

    BACKGROUND: Opioids applied peripherally at the site of surgery may produce postoperative analgesia with few side effects. We performed this systematic review to evaluate the analgesic effect of peripherally applied opioids for acute postoperative pain. METHODS: We searched PubMed (1966 to June...... 2013), Embase (1980 to June 2013), and the Cochrane Central Register of Controlled Trials (The Cochrane Library 2013, Issue 6). Randomized controlled trials investigating the postoperative analgesic effect of peripherally applied opioids vs. systemic opioids or placebo, measured by pain intensity...... difference -5 mm, 95% CI: -7 to -3) for peripherally applied opioids vs. placebo and statistically significant increased time to first analgesic (mean difference 153 min, 95% CI: 41-265). When preoperative inflammation was reported (five studies), peripherally applied opioids significantly improved...

  15. History and theory in "applied ethics".

    Science.gov (United States)

    Beauchamp, Tom L

    2007-03-01

    Robert Baker and Laurence McCullough argue that the "applied ethics model" is deficient and in need of a replacement model. However, they supply no clear meaning to "applied ethics" and miss most of what is important in the literature on methodology that treats this question. The Baker-McCullough account of medical and applied ethics is a straw man that has had no influence in these fields or in philosophical ethics. The authors are also on shaky historical grounds in dealing with two problems: (1) the historical source of the notion of "practical ethics" and (2) the historical source of and the assimilation of the term "autonomy" into applied philosophy and professional ethics. They mistakenly hold (1) that the expression "practical ethics" was first used in a publication by Thomas Percival and (2) that Kant is the primary historical source of the notion of autonomy as that notion is used in contemporary applied ethics.

  16. Satellite Gravimetry Applied to Drought Monitoring

    Science.gov (United States)

    Rodell, Matthew

    2010-01-01

    Near-surface wetness conditions change rapidly with the weather, which limits their usefulness as drought indicators. Deeper stores of water, including root-zone soil wetness and groundwater, portend longer-term weather trends and climate variations, thus they are well suited for quantifying droughts. However, the existing in situ networks for monitoring these variables suffer from significant discontinuities (short records and spatial undersampling), as well as the inherent human and mechanical errors associated with the soil moisture and groundwater observation. Remote sensing is a promising alternative, but standard remote sensors, which measure various wavelengths of light emitted or reflected from Earth's surface and atmosphere, can only directly detect wetness conditions within the first few centimeters of the land s surface. Such sensors include the Advanced Microwave Scanning Radiometer - Earth Observing System (AMSR-E) C-band passive microwave measurement system on the National Aeronautic and Space Administration's (NASA) Aqua satellite, and the combined active and passive L-band microwave system currently under development for NASA's planned Soil Moisture Active Passive (SMAP) satellite mission. These instruments are sensitive to water as deep as the top 2 cm and 5 cm of the soil column, respectively, with the specific depth depending on vegetation cover. Thermal infrared (TIR) imaging has been used to infer water stored in the full root zone, with limitations: auxiliary information including soil grain size is required, the TIR temperature versus soil water content curve becomes flat as wetness increases, and dense vegetation and cloud cover impede measurement. Numerical models of land surface hydrology are another potential solution, but the quality of output from such models is limited by errors in the input data and tradeoffs between model realism and computational efficiency. This chapter is divided into eight sections, the next of which describes

  17. System dynamics for mechanical engineers

    CERN Document Server

    Davies, Matthew

    2015-01-01

    This textbook is ideal for mechanical engineering students preparing to enter the workforce during a time of rapidly accelerating technology, where they will be challenged to join interdisciplinary teams. It explains system dynamics using analogies familiar to the mechanical engineer while introducing new content in an intuitive fashion. The fundamentals provided in this book prepare the mechanical engineer to adapt to continuous technological advances with topics outside traditional mechanical engineering curricula by preparing them to apply basic principles and established approaches to new problems. This book also: ·         Reinforces the connection between the subject matter and engineering reality ·         Includes an instructor pack with the online publication that describes in-class experiments with minimal preparation requirements ·         Provides content dedicated to the modeling of modern interdisciplinary technological subjects, including opto-mechanical systems, high...

  18. Solid mechanics a variational approach

    CERN Document Server

    Dym, Clive L

    2013-01-01

    Solid Mechanics: A Variational Approach, Augmented Edition presents a lucid and thoroughly developed approach to solid mechanics for students engaged in the study of elastic structures not seen in other texts currently on the market. This work offers a clear and carefully prepared exposition of variational techniques as they are applied to solid mechanics. Unlike other books in this field, Dym and Shames treat all the necessary theory needed for the study of solid mechanics and include extensive applications. Of particular note is the variational approach used in developing consistent structural theories and in obtaining exact and approximate solutions for many problems.  Based on both semester and year-long courses taught to undergraduate seniors and graduate students, this text is geared for programs in aeronautical, civil, and mechanical engineering, and in engineering science. The authors’ objective is two-fold: first, to introduce the student to the theory of structures (one- and two-dimensional) as ...

  19. Mathematical Modeling in Continuum Mechanics

    Science.gov (United States)

    Temam, Roger; Miranville, Alain

    2005-06-01

    Temam and Miranville present core topics within the general themes of fluid and solid mechanics. The brisk style allows the text to cover a wide range of topics including viscous flow, magnetohydrodynamics, atmospheric flows, shock equations, turbulence, nonlinear solid mechanics, solitons, and the nonlinear Schrödinger equation. This second edition will be a unique resource for those studying continuum mechanics at the advanced undergraduate and beginning graduate level whether in engineering, mathematics, physics or the applied sciences. Exercises and hints for solutions have been added to the majority of chapters, and the final part on solid mechanics has been substantially expanded. These additions have now made it appropriate for use as a textbook, but it also remains an ideal reference book for students and anyone interested in continuum mechanics.

  20. Soliton mechanics

    CERN Document Server

    Gunasekaran, Sharmila; Kunduri, Hari K

    2016-01-01

    The domain of outer communication of five-dimensional asymptotically flat stationary spacetimes may possess non-trivial 2-cycles (bubbles). Spacetimes containing such 2-cycles can have non-zero energy, angular momenta, and charge even in the absence of horizons. A mass variation formula has been established for spacetimes containing bubbles and possibly a black hole horizon. This `first law of black hole and soliton mechanics' contains new intensive and extensive quantities associated to each 2-cycle. We consider examples of such spacetimes for which we explicitly calculate these quantities and show how regularity is essential for the formulae relating them to hold. We also derive new explicit expressions for the angular momenta and charge for spacetimes containing solitons purely in terms of fluxes supporting the bubbles.

  1. Soliton mechanics

    Science.gov (United States)

    Gunasekaran, Sharmila; Hussain, Uzair; Kunduri, Hari K.

    2016-12-01

    The domain of outer communication of five-dimensional asymptotically flat stationary spacetimes may possess nontrivial 2-cycles (bubbles). Spacetimes containing such 2-cycles can have nonzero energy, angular momenta, and charge even in the absence of horizons. A mass variation formula has been established for spacetimes containing bubbles and possibly a black hole horizon. This "first law of black hole and soliton mechanics" contains new intensive and extensive quantities associated with each 2-cycle. We consider examples of such spacetimes for which we explicitly calculate these quantities and show how regularity is essential for the formulas relating them to hold. We also derive new explicit expressions for the angular momenta and charge for spacetimes containing solitons purely in terms of fluxes supporting the bubbles.

  2. Fracture mechanics

    Science.gov (United States)

    Shannon, John L., Jr.

    1986-01-01

    The application of fracture mechanics to the design of ceramic structures will require the precise measurement of crack growth and fracture resistance of these materials over their entire range of anticipated service temperatures and standardized test methods for making such measurements. The development of a standard test for measuring the plane strain fracture toughness is sought. Stress intensity factor coefficients were determined for three varieties of chevron-notch specimens, and fracture toughness measurements were made on silicon nitrides, silicon carbides, and aluminum oxides to assess the performance of each specimen variety. It was determined that silicon nitride and silicon carbides have flat crack growth resistance curves, but aluminum oxide does not. Additionally, batch-to-batch differences were noticed for the aluminum oxide. Experiments are continuing to explain the rising crack growth resistance and batch-to-batch variations for the aluminum oxide.

  3. The mechanism of applying lysogenicity in phage-biotyping scheme for subtyping O1 E1 Tor Vibrio cholerae strains%O1群E1Tor型霍乱弧菌溶原性测定的机理研究

    Institute of Scientific and Technical Information of China (English)

    申小娜; 张京云; 付秀萍; 李杰; 梁未丽; 阚飙

    2016-01-01

    Objective To determine the principle of applying lysogenicity in Phage-Biotyping Scheme developed for the subtyping of O1 E1 Tor Vibrio cholerae strains.Methods 118 V.cholerae strains including 76 E1 Tor strains,8 classical strains and 34 serogroup O139 were selected to analyze the lysogenicity and sensitivity to lysogenic phage 919TP as described in the Manuals of cholera prevention and control,the genes of this phage were also determined among the genome sequences of these strains and the phages produced by them.Results All O1 E1Tor Vibrio cholerae 19 strains that produced positive results in lysogenicity,had the lysogenic K139 phage in genome and could both resist to lysogenic phage 919TP and release the K139 family phage.All the O1 E1Tor Vibrio cholerae 22 strains that produced positive results in sensitivity to the lysogenic phage,had no K139 family phage genes and got negative results in lysogenicity.However,the phages of this family were not released from 6 classical strains with positive lysogenicity result.Five serogroup O139 strains were detected releasing temperate phages K139 without the sensitivity to phage 919TP.Conclusions Applying the lysogenicity in Phage-Biotyping Scheme for subtyping O1 E1 Tor Vibrio cholerae strains is based on the ability to produce lysogenic bacteriophage K139.The index of "sensitivity to the lysogenic phage" was also associated with this ability.%目的 确定我国O1群El Tor生物型霍乱弧菌“噬菌体-生物分型”方案中“溶原性测定”中检测噬菌体的种类,研究溶原性测定的原理.方法 选择O1群El Tor型霍乱弧菌76株、O1群古典株8株、O139群菌株34株,利用溶原性测定方法检测菌株溶原性,检测菌株自发产生的溶原性噬菌体种类,检测阳性和阴性菌株染色体中该前噬菌体基因组,并检测这些菌株对溶原性噬菌体919TP(弧菌噬菌体K139家族)的敏感性.结果 O1群El Tor型菌株溶原性测定为阳性的19株菌,其释

  4. ON THE EVOLUTION OF APPLIED MATHEMATICS

    Institute of Scientific and Technical Information of China (English)

    林家翘

    2003-01-01

    The recent trend in the application of mathematics to biological sciences is discussed in historical perspective. It is suggested that this new development should be regarded as a natural evolution of applied mathematics in the expansion of its scope. The mathematical concepts and methods to be used are not expected to be substantially different from those used in traditional applied mathematics. For illustration, we sketch an application of the kinetic theory of the study of dissipative systems to the study of the structure and function of protein molecules. The traditional concepts and methods of statistical physics can be successfully applied to yield predictions for comparison with empirical data.

  5. Applied Sciences—Connecting Theories with Practice

    Directory of Open Access Journals (Sweden)

    Takayoshi Kobayashi

    2011-09-01

    Full Text Available Applied sciences cover many interdisciplinary fields that put basic sciences to application and make big changes by taking the one not-so-small step from “knowing how” to “knowing how-to”, the serendipity of which is often intriguing. Applied sciences are so deeply entrenched in almost all aspects of our daily lives. To provide an advanced forum for scholars all over the world to discuss and communicate the cutting-edge development in this field, on behalf of the Editorial Board members, I am honored to introduce Applied Sciences, a scholarly, peer-reviewed open access journal. [...

  6. Applied linguistics - a science of culture?

    Directory of Open Access Journals (Sweden)

    Benke, Gertraud

    2003-01-01

    Full Text Available In this article, the status of applied linguistics as discipline is questioned and problems of establishing it - and other newly formed scientific enterprises like cultural science - as disciplines are discussed. This discussion is contextualized using the author's own experience as applied linguist working in (the institutional structure of Austria. Secondly, applied linguistics is presented as complementing cultural science, with both exploring at times the same phenomena albeit under different perspectives and focussing on different levels of experience. Two examples of research involving such a joint interest with different foci are discussed.

  7. Encyclopedia of applied and computational mathematics

    CERN Document Server

    2015-01-01

    EACM is a comprehensive reference work covering the vast field of applied and computational mathematics. Applied mathematics itself accounts for at least 60 per cent of mathematics, and the emphasis on computation reflects the current and constantly growing importance of computational methods in all areas of applications. EACM emphasizes the strong links of applied mathematics with major areas of science, such as physics, chemistry, biology, and computer science, as well as specific fields like atmospheric ocean science. In addition, the mathematical input to modern engineering and technology form another core component of EACM.

  8. Concept analysis of culture applied to nursing.

    Science.gov (United States)

    Marzilli, Colleen

    2014-01-01

    Culture is an important concept, especially when applied to nursing. A concept analysis of culture is essential to understanding the meaning of the word. This article applies Rodgers' (2000) concept analysis template and provides a definition of the word culture as it applies to nursing practice. This article supplies examples of the concept of culture to aid the reader in understanding its application to nursing and includes a case study demonstrating components of culture that must be respected and included when providing health care.

  9. Fiber Breakage Model for Carbon Composite Stress Rupture Phenomenon: Theoretical Development and Applications

    Science.gov (United States)

    Murthy, Pappu L. N.; Phoenix, S. Leigh; Grimes-Ledesma, Lorie

    2010-01-01

    Stress rupture failure of Carbon Composite Overwrapped Pressure Vessels (COPVs) is of serious concern to Science Mission and Constellation programs since there are a number of COPVs on board space vehicles with stored gases under high pressure for long durations of time. It has become customary to establish the reliability of these vessels using the so called classic models. The classical models are based on Weibull statistics fitted to observed stress rupture data. These stochastic models cannot account for any additional damage due to the complex pressure-time histories characteristic of COPVs being supplied for NASA missions. In particular, it is suspected that the effects of proof test could significantly reduce the stress rupture lifetime of COPVs. The focus of this paper is to present an analytical appraisal of a model that incorporates damage due to proof test. The model examined in the current paper is based on physical mechanisms such as micromechanics based load sharing concepts coupled with creep rupture and Weibull statistics. For example, the classic model cannot accommodate for damage due to proof testing which every flight vessel undergoes. The paper compares current model to the classic model with a number of examples. In addition, several applications of the model to current ISS and Constellation program issues are also examined.

  10. 用于重冰区架空输电线路的钢芯铝合金绞线机械特性分析%Mechanical Characteristic Analysis of Aluminium-alloy Conductor Steel-reinforced Applying in Transmission Line in Heavy Icing Area

    Institute of Scientific and Technical Information of China (English)

    何炜斌; 郝艳捧

    2012-01-01

    为提高重冰区架空输电线路的安全可靠性,需合理选择重冰区架空输电线路的导线型号。为此,计算了钢芯铝合金绞线和普通钢芯铝绞线在相同的悬挂条件下,最大覆冰时导线悬挂点的安全系数,计算、比较了2种导线舞动时的动态应力、安全系数及最大覆冰时的最大弧垂。结果表明:钢芯铝合金绞线应用于重冰区输电线路时,能表现出更优秀的机械特性和弧垂特性,且导线的最大设计覆冰厚度越大,其优势越明显。另外,得益于其良好的弧垂特性,钢芯铝合金绞线可降低线路铁塔的高度,节省钢材。%In order to enhance the safe reliability of transmission line in heavy icing area, the type of conductor should be selected reasonably. Thus, in the same hanging condition, the safety coefficients of hanging point of aluminum-alloy conductor steel-reinforced and steel-cored aluminum strand wire were calculated within the largest icing. Dynamic stress, safety coefficients and maximum sag under largest icing condition of two types of wires were also calculated and compared. The results show that aluminum-alloy conductor steel-reinforced wire used for heavy icing transmission line possesses better mechanical properties and sag characteristics. Moreover, the thicker the maximum ice coating of wire is designed, the more obvious its advantage shows. Otherwise, the steel can be retrenched profit from the sag characteristics of aluminum alloy conductor steel reinforced wire.

  11. Exercise, muscle, and the applied load-bone strength balance.

    Science.gov (United States)

    Giangregorio, L; El-Kotob, R

    2017-01-01

    A fracture occurs when the applied load is greater than the bone can withstand. Clinical practice guidelines for the management of osteoporosis include recommendations for exercise; one of the few therapies where the proposed anti-fracture mechanisms that include effects on both bone strength and applied loads, where applied loads can come in the form of a fall, externally applied loads, body weight, or muscle forces. The aim of this review is to provide an overview of the clinical evidence pertaining to the potential efficacy of exercise for preventing fractures in older adults, including its direct effects on outcomes along the causal pathway to fractures (e.g., falls, posture, bone strength) and the indirect effects on muscle or the muscle-bone relationship. The evidence is examined as it pertains to application in clinical practice. Considerations for future research are discussed, such as the need for trials in individuals with low bone mass or students that evaluate whether changes in muscle mediate changes in bone. Future trials should also consider adequacy of calorie or protein intake, the confounding effect of exercise-induced weight loss, or the most appropriate therapeutic goal (e.g., strength, weight bearing, or hypertrophy) and outcome measures (e.g., fracture, disability, cost-effectiveness).

  12. Umbilical mechanism

    Science.gov (United States)

    Barron, Daniel R. (Inventor); Jasulaitis, Vytas (Inventor); Morrill, Brion F. (Inventor)

    1995-01-01

    Apparatus is described for automatically mating a pair of connectors and protecting them prior to mating, which minimizes weight and uses relatively simple and reliable mechanisms. Lower and upper connectors (24, 26) are held in lower and upper parts (14, 16) of a housing, with the upper connector mounted on a carrier (32) that is motor driven to move down and mate the connectors. A pair of movable members (36, 38) serve as shields, as coarse alignment aids, and as force transmitters. The movable members are pivotally mounted at the bottom of the upper housing, and as the carrier moves down it pivots the members out of the way. The movable members have socket elements (116) that closely receive pin elements (120) on the lower housing part, to coarsely align the connectors and to react mating and unmating forces between the housings. The carrier has a pair of plate portions (60, 62) with slots (64), and the movable members have cam followers engaged with the slot walls, to move the members with precision. The carrier plate-like portions engage follower members (82) that pivot open lower shield parts (44, 46) covering the lower connector, which is mounted on four stacks of Belleville washers (142).

  13. INDEXING MECHANISM

    Science.gov (United States)

    Kock, L.J.

    1959-09-22

    A device is presented for loading and unloading fuel elements containing material fissionable by neutrons of thermal energy. The device comprises a combination of mechanical features Including a base, a lever pivotally attached to the base, an Indexing plate on the base parallel to the plane of lever rotation and having a plurality of apertures, the apertures being disposed In rows, each aperture having a keyway, an Index pin movably disposed to the plane of lever rotation and having a plurality of apertures, the apertures being disposed in rows, each aperture having a keyway, an index pin movably disposed on the lever normal to the plane rotation, a key on the pin, a sleeve on the lever spaced from and parallel to the index pin, a pair of pulleys and a cable disposed between them, an open collar rotatably attached to the sleeve and linked to one of the pulleys, a pin extending from the collar, and a bearing movably mounted in the sleeve and having at least two longitudinal grooves in the outside surface.

  14. The Concept of Human Functional State in Russian Applied Psychology

    Directory of Open Access Journals (Sweden)

    Anna B. Leonova

    2009-01-01

    Full Text Available The concept of human functional states (HFS is considered in the framework of activity regulation approach developed in Russian applied psychology. Aimed at the analysis of changes in regulatory mechanisms of on-going activity, structural methods for multilevel assessment of workers’ states are discussed. Three different strategies of data integration are proposed regarding the types of essential practical problems. Their usability is exemplified with the help of two empirical studies concerned with reliability of fire-fighters’ work in the Chernobyl Zone and effects of interruptions in computerized office environment. A general framework for applied HFS research is proposed in order to develop new ecologically valid psychodiagnostic procedures that can help to create efficient stress-management programs for enhancing human reliability and performance in complex job environment.

  15. Essential competencies in contemporary applied sport psychology ...

    African Journals Online (AJOL)

    African Journal for Physical Activity and Health Sciences ... keeping the training, education and regulation standards of applied sport psychology (ASP) ... An interdisciplinary training model in ASP with acquired competency in both kinesiology ...

  16. Applying Change of Variable to Calculus Problems

    Science.gov (United States)

    Kachapova, Farida; Kachapov, Ilias

    2011-01-01

    This article describes the technique of introducing a new variable in some calculus problems to help students master the skills of integration and evaluation of limits. This technique is algorithmic and easy to apply.

  17. Computational optimization techniques applied to microgrids planning

    DEFF Research Database (Denmark)

    Gamarra, Carlos; Guerrero, Josep M.

    2015-01-01

    appear along the planning process. In this context, technical literature about optimization techniques applied to microgrid planning have been reviewed and the guidelines for innovative planning methodologies focused on economic feasibility can be defined. Finally, some trending techniques and new...

  18. 1st Applied Electromagnetic International Conference

    CERN Document Server

    Othman, Mohd; Aziz, Mohamad; Malek, Mohd

    2015-01-01

    In this book, experts from academia and industry present the latest advances in scientific theory relating to applied electromagnetics and examine current and emerging applications particularly within the fields of electronics, communications, and computer technology. The book is based on presentations delivered at APPEIC 2014, the 1st Applied Electromagnetic International Conference, held in Bandung, Indonesia in December 2014. The conference provided an ideal platform for researchers and specialists to deliver both theoretically and practically oriented contributions on a wide range of topics relevant to the theme of nurturing applied electromagnetics for human technology. Many novel aspects were addressed, and the contributions selected for this book highlight the relevance of advances in applied electromagnetics to a variety of industrial engineering problems and identify exciting future directions for research.

  19. ICT for AQA applied as single award

    CERN Document Server

    Wilson, Barbara

    2007-01-01

    This book has been written specifically for teachers and students following AQA's Applied AS ICT specification and covers the key elements of the units of the course, including the coursework requirements.

  20. Optimal sampling schemes applied in geology

    CSIR Research Space (South Africa)

    Debba, Pravesh

    2010-05-01

    Full Text Available , discuss the definition of hyperspectral versus multispectral, review some recent applications of hyperspectral image analysis, and summarize image-processing techniques commonly applied to hyperspectral imagery. Spectral Image Basics To understand...