WorldWideScience

Sample records for copaifera multijuga hayne

  1. Inclusion Complexes of Copaiba (Copaifera multijuga Hayne Oleoresin and Cyclodextrins: Physicochemical Characterization and Anti-Inflammatory Activity

    Directory of Open Access Journals (Sweden)

    Jonas Gabriel de Oliveira Pinheiro

    2017-11-01

    Full Text Available Complexation with cyclodextrins (CDs is a technique that has been extensively used to increase the aqueous solubility of oils and improve their stability. In addition, this technique has been used to convert oils into solid materials. This work aims to develop inclusion complexes of Copaifera multijuga oleoresin (CMO, which presents anti-inflammatory activity, with β-cyclodextrin (β-CD and hydroxypropyl-β-cyclodextrin (HP-β-CD by kneading (KND and slurry (SL methods. Physicochemical characterization was performed to verify the occurrence of interactions between CMO and the cyclodextrins. Carrageenan-induced hind paw edema in mice was carried out to evaluate the anti-inflammatory activity of CMO alone as well as complexed with CDs. Physicochemical characterization confirmed the formation of inclusion complex of CMO with both β-CD and HP-β-CD by KND and SL methods. Carrageenan-induced paw edema test showed that the anti-inflammatory activity of CMO was maintained after complexation with β-CD and HP-β-CD, where they were able to decrease the levels of nitrite and myeloperoxidase. In conclusion, this study showed that it is possible to produce inclusion complexes of CMO with CDs by KND and SL methods without any change in CMO’s anti-inflammatory activity.

  2. Avaliação in vitro da atividade antibacteriana de um cimento odontológico à base de óleo-resina de Copaifera multijuga Hayne

    Directory of Open Access Journals (Sweden)

    Kátia Regina Felizardo Vasconcelos

    Full Text Available Um dos materiais utilizados para a adequação do meio bucal no serviço público é o cimento produzido a partir de óxido de zinco e eugenol. Entretanto, o eugenol é uma substância citotóxica que pode desencadear alguns efeitos adversos. Por essa razão, procura-se substituir o eugenol por uma substância que apresente baixa toxicidade, mantendo ou mesmo melhorando as propriedades do cimento. O óleo-resina de copaíba é um produto natural, utilizado pelas populações amazônicas e reconhecido por suas propriedades medicinais. Baseando-se nas propriedades desse óleo-resina, na ação antimicrobiana comprovada do hidróxido de cálcio e na ação anti-séptica do óxido de zinco, propôs-se formular um cimento odontológico obtido da associação do ZnO, Ca(OH2 e óleo-resina de Copaifera multijuga Hayne e avaliar sua atividade antibacteriana através do teste de diluição em meio líquido frente às cepas padrão de Streptococcus mutans (ATCC 25175 e S. sanguinis (ATCC 15300. Nesse ensaio, utilizaram-se os seguintes grupos experimentais: o cimento contendo ZnO, Ca(OH2 e óleo-resina de copaíba (G1 e cada um dos constituintes isoladamente, ZnO (G2, Ca(OH2 (G3 e óleo-resina de copaíba (G4. Todos os grupos analisados demonstraram atividade antibacteriana, o G4 apresentou os melhores resultados e o G1 mostrou-se um cimento promissor a ser utilizado em odontologia.

  3. Optimization of headspace solid-phase microextraction for analysis of {beta}-caryophyllene in a nanoemulsion dosage form prepared with copaiba (Copaifera multijuga Hayne) oil

    Energy Technology Data Exchange (ETDEWEB)

    Dias, Daiane de O; Colombo, Mariana; Kelmann, Regina G. [Programa de Pos-Graduacao em Ciencias Farmaceuticas, Faculdade de Farmacia, Universidade Federal do Rio Grande do Sul, Porto Alegre, RS, Av. Ipiranga, 2752, CEP 90610-000 (Brazil); De Souza, Tatiane P. [Programa de Pos-Graduacao em Ciencias Farmaceuticas, Universidade Federal do Amazonas, Manaus, Amazonas (Brazil); Bassani, Valquiria L.; Teixeira, Helder F. [Programa de Pos-Graduacao em Ciencias Farmaceuticas, Faculdade de Farmacia, Universidade Federal do Rio Grande do Sul, Porto Alegre, RS, Av. Ipiranga, 2752, CEP 90610-000 (Brazil); Veiga, Valdir F. [Departamento de Quimica, Instituto de Ciencias Exatas, UFAM, Av. Gal. Rodrigo Octavio, 6.200 - Japiim, 69.079-000, Manaus - AM (Brazil); Limberger, Renata P. [Programa de Pos-Graduacao em Ciencias Farmaceuticas, Faculdade de Farmacia, Universidade Federal do Rio Grande do Sul, Porto Alegre, RS, Av. Ipiranga, 2752, CEP 90610-000 (Brazil); and others

    2012-04-06

    Highlights: Black-Right-Pointing-Pointer A SPME-CG method is proposed for {beta}-caryophyllene assay in nanoemulsions containing copaiba oil. Black-Right-Pointing-Pointer SPME parameters were optimized for efficient {beta}-caryophyllene extraction. Black-Right-Pointing-Pointer The stability-indicating capability and specificity of the method were satisfied. Black-Right-Pointing-Pointer Nanoemulsions partially protected {beta}-caryophyllene under stressing conditions. Black-Right-Pointing-Pointer The proposed method presents linearity, lows LOD and LOQ, good precision, accuracy and robustness. - Abstract: Recent studies have shown the anti-inflammatory activity of Copaiba oils may be addressed to the high content of {beta}-caryophyllene, the most common sesquiterpene detected, especially in the Copaifera multijuga Hayne species. In the present study, nanoemulsions were proposed as a delivery system for copaiba oil in view to treat locally inflamed skin. This article describes the optimization and validation of a stability-indicating SPME-GC method, for {beta}-caryophyllene analysis in the nanoemulsions produced by high pressure homogenization. SPME methods are performed with PDMS (polydimethylsiloxane) fiber (100 {mu}m). Three SPME parameters were evaluated by a three-level-three-factor Box-Behnken factorial design as potentially affecting the technique efficiency. According to the results obtained, the best conditions to extract {beta}-caryophyllene were: (i) sampling temperature of 45 Degree-Sign C, (ii) sampling time of 20 min and (iii) no NaCl addition. Results coming from the forced degradation tests showed a reduction of {beta}-caryophyllene peak area when both caryophyllene methanolic solution and nanoemulsions were exposed to acid hydrolysis, UV-A irradiation, oxidative (H{sub 2}O{sub 2}) and thermolitic (60 Degree-Sign C) conditions. Such reduction occurred in lower extent in the nanoemulsions, suggesting a protective effect of the formulation to {beta

  4. Optimization of headspace solid-phase microextraction for analysis of β-caryophyllene in a nanoemulsion dosage form prepared with copaiba (Copaifera multijuga Hayne) oil

    International Nuclear Information System (INIS)

    Dias, Daiane de O; Colombo, Mariana; Kelmann, Regina G.; De Souza, Tatiane P.; Bassani, Valquiria L.; Teixeira, Helder F.; Veiga, Valdir F.; Limberger, Renata P.

    2012-01-01

    Highlights: ► A SPME-CG method is proposed for β-caryophyllene assay in nanoemulsions containing copaiba oil. ► SPME parameters were optimized for efficient β-caryophyllene extraction. ► The stability-indicating capability and specificity of the method were satisfied. ► Nanoemulsions partially protected β-caryophyllene under stressing conditions. ► The proposed method presents linearity, lows LOD and LOQ, good precision, accuracy and robustness. - Abstract: Recent studies have shown the anti-inflammatory activity of Copaiba oils may be addressed to the high content of β-caryophyllene, the most common sesquiterpene detected, especially in the Copaifera multijuga Hayne species. In the present study, nanoemulsions were proposed as a delivery system for copaiba oil in view to treat locally inflamed skin. This article describes the optimization and validation of a stability-indicating SPME-GC method, for β-caryophyllene analysis in the nanoemulsions produced by high pressure homogenization. SPME methods are performed with PDMS (polydimethylsiloxane) fiber (100 μm). Three SPME parameters were evaluated by a three-level-three-factor Box–Behnken factorial design as potentially affecting the technique efficiency. According to the results obtained, the best conditions to extract β-caryophyllene were: (i) sampling temperature of 45 °C, (ii) sampling time of 20 min and (iii) no NaCl addition. Results coming from the forced degradation tests showed a reduction of β-caryophyllene peak area when both caryophyllene methanolic solution and nanoemulsions were exposed to acid hydrolysis, UV-A irradiation, oxidative (H 2 O 2 ) and thermolitic (60 °C) conditions. Such reduction occurred in lower extent in the nanoemulsions, suggesting a protective effect of the formulation to β-caryophyllene content. Since no degradation products were detected in the same retention time of β-caryophyllene, the specificity of the method was demonstrated. The method was linear in

  5. Avaliação do efeito antifúngico do óleo resina e do óleo essencial de copaíba (Copaifera multijuga Hayne Evaluation of the antifungal effect of oleoresin and essential oil of copaiba (Copaifera multijuga Hayne

    Directory of Open Access Journals (Sweden)

    R.J.A Deus

    2011-01-01

    Full Text Available Óleo de Copaifera multijuga Hayne, in natura e as frações foram avaliados quanto às suas atividades fungitóxicas, frente a cinco espécies de fungos filamentosos do gênero Aspergillus e três espécies de leveduras do gênero Candida. Concentrações de óleo resina e de óleo essencial na faixa de 0,08 mg mL-1a 1,6 mg mL-1 foram usadas para as análises qualitativa e quantitativas. As amostras foram dispostas sobre discos de papel de 5 mm de diâmetro e distribuídos sobre o meio Saboraud em placas de Petri, inoculadas com esporos dos microrganismos e incubadas a 28ºC durante 10 dias. Utilizou-se uma solução com 1,6 mg mL-1 de nitrato de miconazol como controle positivo. Os resultados qualitativos mostraram que o óleo resina apresentou boa atividade, porém uma das frações do óleo essencial se mostrou altamente efetivo contra C. parapsilosis IOC - 2882, A.flavus IOC-3874 e A. tamarii IOC-187 com halos de inibição de 16,0±1,4 mm, 19,5±2,1 mm e 12,5±3,5 mm, respectivamente. Já a avaliação quantitativa mostrou que 0,3 mg mL-1 do óleo resina inibiu o crescimento de A. flavus e C. parapsilosis, enquanto que 0,08 mg mL-1 da fração do óleo essencial atingiu esta mesma atividade.Copaifera multijuga Hayne oil in natura and its fractions were evaluated as to their fungitoxic activities against five filamentous fungus species belonging to the genus Aspergillus and three yeast species of the genus Candida. Oleoresin and essential oil concentrations ranging from 0.08 mg mL-1 to 1.6 mg mL-1 were used for qualitative and quantitative analyses. The samples were placed onto 5mm-diameter paper discs distributed on Sabouraud's medium in Petri dishes inoculated with spores of the microorganisms and incubated at 28ºC for 10 days. A solution containing 1.6 mg mL-1 miconazole nitrate was used as positive control. Qualitative results showed that the oleoresin presented good activity, while a fraction of the essential oil was highly effective

  6. Efeito fungitóxico in vitro do óleo resina e do óleo essencial de copaíba (Copaifera multijuga Hayne In vitro fungitoxic effect of the oil-resin and the essential oil of copaiba (Copaifera multijuga Hayne

    Directory of Open Access Journals (Sweden)

    R.J.A. Deus

    2009-01-01

    Full Text Available Óleo de Copaifera multijuga Hayne, in natura e as frações foram avaliadas quanto às atividades fungitóxicas in vitro, frente a cinco espécies de fungos filamentosos do gênero Aspergillus e três espécies de leveduras do gênero Candida. Concentrações de óleo resina e de óleo essencial na faixa de 0,08 mg mL-1 a 1,6 mg mL-1 foram usadas para as análises qualitativa e quantitativas. As amostras foram dispostas sobre discos de papel de 5 mm de diâmetro e distribuídos sobre o meio Saboraud em placas de Petri, inoculadas com esporos dos microorganismos e incubadas a 28ºC durante 10 dias. Utilizou-se solução com 1,6 mg mL-1 de nitrato de miconazol como controle positivo. Os resultados qualitativos mostraram que o óleo resina apresentou boa atividade fungistática, porém uma das frações do óleo essencial se mostrou altamente efetiva contra Candida parapsilosis IOC-2882, Aspergillus flavus IOC-3874 e A tamarii IOC-187 com halos de inibição de 16,0±1,4 mm, 19,5±2,1 mm e 12,5±3,5 mm, respectivamente. Já a avaliação quantitativa mostrou que 0,3 mg mL-1 do óleo resina inibiu o crescimento de A. flavus e C. parapsilosis, enquanto que 0,08 mg mL-1 da fração do óleo essencial atingiu esta mesma atividade.Copaifera multijuga Hayne oil, crude and fractions, was evaluated for its in vitro fungitoxic activities against five species of filamentous fungi belonging to the genus Aspergillus and three yeast species of the genus Candida. Oil-resin and essential oil concentrations ranging from 0.008 mg mL-1 to 1.6 mg mL-1 were used in qualitative and quantitative analyses. Samples were placed onto 5mm-diameter paper disks and distributed on Saboraud culture medium in Petri dishes inoculated with conidia and incubated at 28ºC during 10 days. A solution with 1.6 mg mL-1 of miconazole nitrate was used as positive control. Qualitative results indicated that the oil-resin presented good fungistatic activity; however, one of the essential

  7. Pharmacological evaluation of Copaifera multijuga oil in rats.

    Science.gov (United States)

    Kobayashi, Cristine; Fontanive, Tiago Oselame; Enzweiler, Barbara Grade; de Bona, Laura Renata; Massoni, Thalita; Apel, Miriam Anders; Henriques, Amélia Teresinha; Richter, Marc François; Ardenghi, Patrícia; Suyenaga, Edna Sayuri

    2011-03-01

    Copaiba oil is an oleoresin made up of resin acids and volatile compounds, and it is obtained by tapping the trunks of trees that are members of the Copaifera L. (Leguminoseae) genus and are found in tropical parts of Latin America. This study analyzed the chemical composition of Copaifera multijuga Hayne oil and conducted preclinical trials to investigate anti-inflammatory effects and any action it may have on the central nervous system (CNS) of rats. The chemical analysis was carried out using gas chromatography with mass spectroscopy. Anti-inflammatory activity was measured by leucocytes mobilization, by chemotaxis assay in Boyden's chamber, and by pleurisy model in rats. CNS effect was determined by plus maze and open-field assays. The statistical test applied was analysis of variance (ANOVA) followed by Tukey's test or ANOVA followed by Duncan's test. The oil was composed of sesquiterpenes with the predominance of β-caryophyllene (36.0%), followed by α-copaene (18.8%), β-bisabolene (8.5%), and α-trans-bergamotene (7.0%). Data demonstrated that at 100 and 200 mg/kg doses and at a concentration of 200 μl/ml copaiba essential oil presented anti-inflammatory effects both in vivo and in vitro based on reduced leukocyte migration to the rats' pleural cavity and to the chemotactic agent lipopolysaccharide solution, respectively. During the experiments investigating CNS effects, locomotive and exploratory activities were reduced and the animals' anxiety increased at 100 and 200 mg/kg. The results obtained suggest that copaiba oil has an interesting anti-inflammatory effect and important effect on the CNS.

  8. Copaifera multijuga ethanolic extracts, oil-resin, and its derivatives display larvicidal activity against Anopheles darlingi and Aedes aegypti (Diptera: Culicidae

    Directory of Open Access Journals (Sweden)

    Frances Tatiane Tavares Trindade

    2013-05-01

    Full Text Available Copaifera spp. is a common tree species found in the tropical region of Latin America, popularly known as copaiba or pau-d'alho. Oil-resin from different Copaifera species and its components present several biological activities such as antimicrobial, anti-inflammatory, antioxidant and insecticidal, including larvicidal activity against mosquitoes. Thus, bark and leaf ethanolic extracts, oil-resin, essential oil and alepterolic acid from Copaifera multijuga Hayne, Fabaceae, were tested as larvicides against the main malaria vector in the north of Brazil, Anopheles darlingi and also Aedes aegypti, the dengue vector. A. darlingi larval mortality was significantly higher than A. aegypti for most tested compounds. Bark and leaf extracts resulted in lower Lethal Concentrations (LC50 values for A. darlingi, 3 and 13 ppm, respectively, while the essential oil provided the lowest LC50 value for A. aegypti, 18 ppm. Despite of that, the lowest LC values were from the alepterolic acid for both species, i.e. 0.9 and 0.7 ppm for A. darlingi and A. aegypti, respectively.

  9. Copaifera multijuga ethanolic extracts, oil-resin, and its derivatives display larvicidal activity against Anopheles darlingi and Aedes aegypti (Diptera: Culicidae

    Directory of Open Access Journals (Sweden)

    Frances Tatiane Tavares Trindade

    2013-06-01

    Full Text Available Copaifera spp. is a common tree species found in the tropical region of Latin America, popularly known as copaiba or pau-d'alho. Oil-resin from different Copaifera species and its components present several biological activities such as antimicrobial, anti-inflammatory, antioxidant and insecticidal, including larvicidal activity against mosquitoes. Thus, bark and leaf ethanolic extracts, oil-resin, essential oil and alepterolic acid from Copaifera multijuga Hayne, Fabaceae, were tested as larvicides against the main malaria vector in the north of Brazil, Anopheles darlingi and also Aedes aegypti, the dengue vector. A. darlingi larval mortality was significantly higher than A. aegypti for most tested compounds. Bark and leaf extracts resulted in lower Lethal Concentrations (LC50 values for A. darlingi, 3 and 13 ppm, respectively, while the essential oil provided the lowest LC50 value for A. aegypti, 18 ppm. Despite of that, the lowest LC values were from the alepterolic acid for both species, i.e. 0.9 and 0.7 ppm for A. darlingi and A. aegypti, respectively.

  10. Detection of adulterated copaiba (Copaifera multijuga Hayne oil-resins by refractive index and thin layer chromatography

    Directory of Open Access Journals (Sweden)

    Karol de S. Barbosa

    Full Text Available The refractive indices (RI of the eight samples of copaiba oils, collected for this study at RDS Tupé ranged from 1.50284 to 1.50786. The thin layer chromatography (TLC plates of these oils revealed with anisaldehyde-sulphuric acid reagent showed dark lilac stains with several small stains at low Rf and a large rounded stain at high Rf. On the other hand, the twelve copaiba oils purchased at local markets presented RI between 1.48176 and 1.50886, and the TLC plates, showed as general profile blue stains, with smaller superimposed stains at low Rf, bigger superimposed stains like elongated stain at high Rf and a colorless rounded stain at middle Rf. Among 12 purchased oils at local markets, a three oil-resins presented similar RI and TLC profile to those observed for collected copaiba oils; b six oils showed same RI and TLC profiles to those observed for soybean oil; c three samples presented RI near to those showed by copaiba oil-resin, however the TLC profile was near to profile observed for a prepared mixture soybean oil: copaiba oil, two samples with 3:1 proportion and one sample with 1:3 proportion. Therefore, the RI determination and the TLC profiles could be considered rapid and efficient procedures for detection of vegetal oil in the copaiba oil-resins.

  11. Haynes, Ray oral history interviews

    OpenAIRE

    Interviewee: Haynes, Ray; Interviewer: Walliser, Andrea; Interviewer: Bauder, Ken; Principal Investigator: Hall, Peter V

    2013-01-01

    Ray Haynes is a former president of the BC Federation of Labour. As a young man Haynes worked at Hudson’s Bay Company Wholesale, a division of the Hudson’s Bay Company, where he reported earning a low wage and working in poor conditions. He then worked at Canadian White Pine sawmill where he learned about labour and other social issues from union members who were communist, Leninist, and Trotskyist. He worked at White Pine for only 18 months even though he was earning a high wage. Haynes told...

  12. Constituintes das sementes de Copaifera officinalis L. Constituents from Copaifera officinalis L. seeds

    Directory of Open Access Journals (Sweden)

    Valdir F. Veiga Junior

    2007-01-01

    Full Text Available O gênero Copaifera L. é um dos mais importantes economicamente na Região Amazônica devido, principalmente, à produção dos óleos de copaíba, oléo-resinas com diversas propriedades farmacológicas confirmadas. Apesar disso, os estudos fitoquímicos com as sementes das árvores do gênero Copaifera L.são raros. Copaifera officinalis foi a primeira espécie do gênero Copaifera a ser descrita. Este trabalho descreve a composição dos extratos obtidos em hexano e em acetato de etila das sementes de C. officinalis. No extrato obtido em hexano, a análise por cromatografia em fase gasosa utilizando padrões e através de espectrometria de massas permitiu a identificação de: esqualeno, tetradecano, hexadecano, campesterol, estigmasterol e beta-sitosterol; os ácidos graxos hexadecanóico, 9-octadecenóico e octadecanóico (majoritários; e decanóico, eicosanóico, docosanóico e tetracosanóico (minoritários. Cumarina foi isolada do extrato em acetato de etila e identificada por técnicas de RMN.Copaifera L. is one of the most economically important plant genera in the Amazon Region, since it exudes a resin-oil named copaiba oil possessing several confirmed pharmacological properties. In spite of that, phytochemical studies of the seeds from this genus are rare. Copaifera officinalis L. was the first species in the genus Copaifera to be described. This paper describes the chemical composition of the hexane and ethyl acetate extracts of the seeds from this species. In the hexane extract, gas chromatography and mass spectrometry analyses enabled us to identify squalene, tetradecane, hexadecane, campesterol, stigmasterol and beta-sitosterol; hexadecanoic, 9-octadecenoic and octadecanoic acids (major substances; as well as decanoic, eicosanoic, docosanoic and tetracosanoic (minor substances acids. Coumarin was detected in the ethyl acetate extract, isolated and identified by NMR.

  13. Dynamic strain aging in Haynes 282 superalloy

    Directory of Open Access Journals (Sweden)

    Hörnqvist Magnus

    2014-01-01

    Full Text Available Haynes 282 is a newly introduced Ni-based superallony, developed to provide a combination of high-temperature mechanical properties, thermal stability and processability. The present contribution investigates the effect of dynamic strain aging (DSA on the deformation behaviour of Haynes 282 during monotonic and cyclic loading. It is shown that DSA (presumably related to carbon diffusion based on rough estimates of the activation energy completely dominates the development of the stress during cycling at intermediate temperatures, leading to extensive cyclic hardening and serrated yielding. However, no clear effects on the fatigue life or the resulting dislocation structure could be observed. The tensile properties were not severely affected, in spite of the presence of extensive serrated yielding, although a reduction in ductility was observed in the DSA temperature regime. During monotonic loading at lower strain rates indications of an additional DSA mechanism due to substitutional elements were observed.

  14. MORFOBIOMETRIA E GERMINAÇÃO DE SEMENTES DE Parkia multijuga Benth. (Fabaceae-Mimosoideae

    Directory of Open Access Journals (Sweden)

    Cartiane Rubishirley Macêdo Rocha

    2014-03-01

    Full Text Available Apesar dos métodos para a análise de sementes de muitas espécies estarem descritos nas Regras para Análises de Sementes, para a maioria das sementes das espécies brasileiras não há, ainda, métodos para o teste de germinação. Assim, os objetivos dessa pesquisa foram determinar as dimensões das sementes e as características das plântulas de Parkia multijuga e estabelecer o substrato e a temperatura para a germinação. As dimensões das sementes avaliadas foram: comprimento, largura e espessura. Para avaliação da germinação, em diferentes temperaturas e substratos, foi utilizado o delineamento experimental inteiramente casualizado em fatorial duplo (dois substratos, entre areia e entre papel, e quatro temperaturas, 20, 25 e 30ºC com luz contínua e 25-30°C com alternância de luz. As sementes de Parkia multijuga são elipsoidais, com tamanho médio de 46,4 × 11,8 × 8,8 mm. A germinação das sementes é do tipo hipógea e criptocotiledonar. As temperaturas adequadas para o teste de germinação são 25 ou 30ºC, em substrato areia, em luz contínua. Palavras-chave: Faveira-benguê, plântula normal; temperatura, substrato. MORPHOBIOMETRY AND GERMINATION OF Parkia multijuga Benth. SEEDS ABSTRACT Many species have the seed analysis method described in rules for seed testing, however some Brazilian native species do not have studies related about germination methods. The aims of this study were characterize the size of Parkia multijuga Benth. seeds and determine the substrate and temperature for the germination test. The sizes assessed were the length, the width and the thickness. To indicate the best temperature and substrate for the germination test the completely randomized design was used in factorial (two substrate, between sand and between paper, and four temperatures, 20, 25 and 30ºC with light and 25-30°C, with alternated light. Parkia multijuga seeds are ellipsoids shape and its mean size is 46.4 × 11.8 × 8.8 mm

  15. Reproduction, pollination and seed predation of Senna multijuga (Fabaceae in two protected areas in the Brazilian Atlantic forest

    Directory of Open Access Journals (Sweden)

    Marina Wolowski

    2011-12-01

    Full Text Available One important subject is to determine the effectiveness of conservation areas, where different management categories are being applied, to maintain effective sexual reproduction in plants and their interactions with animal groups. To evaluate this issue, we compared the phenology, reproductive success, pollination and pre-dispersal seed predation of the legume tree Senna multijuga in two differently managed protected areas in Southeastern Brazil: the Itatiaia National Park and the Environmental Protection Area of Serrinha do Alambari, from December 2007 to December 2008. Vegetative and reproductive phenodinamycs were registered monthly in 80 individuals; other evaluations included 104 observation hours for pollination (March-May 2008 in 51 inflorescences; besides, fruit counts, fecundity and seed predation. Sexual reproduction of S. multijuga depends on the transfer of pollen by large bees (Bombus, Centris, Epicharis and Xylocopa, as the species is self-incompatible. Bruchidae species of the genus Acanthoscelides and Sennius predate seeds. Vegetative and reproductive phenodynamics differed among sites. Our results indicated that ecological interactions were lower at the protected area, but the reproductive processes in S. multijuga were not ruptured or critically degraded. This reinforces the idea that landscape areas with intermediate levels of protection, such as environmental protection areas, are suitable as buffer zones, and thus, relevant to the conservation of ecological processes when associated with more strictly protected areas. Rev. Biol. Trop. 59 (4: 1939-1948. Epub 2011 December 01Es importante determinar la eficacia de las áreas de conservación cuando se están implementando diferentes categorías de manejo, y una forma de hacerlo es conociendo si se mantiene una reproducción sexual efectiva en las especies de plantas y sus interacciones con grupos de animales. Para evaluar esta cuestión, se comparó la fenología, el

  16. Terpenoid biosynthesis in Euphorbia lathyris and Copaifera spp

    International Nuclear Information System (INIS)

    Skrukrud, C.L.

    1987-07-01

    Biosynthesis of triterpenoids by isolated latex of Euphorbia lathyris was investigated. The rate of in vitro incorporation of mevalonic acid into triterpenoids was thirty times greater than acetate incorporation indicating that the rate-limiting step in the pathway occurs prior to mevalonate. Both HMG-CoA reductase (EC 1.1.1.34) and HMG-CoA lyase (EC 4.1.3.4) activities were detected in isolated latex. HMG-CoA reductase was localized to a membrane-bound fraction of a 5000g pellet of latex. The rate of conversion of HMG-CoA to mevalonate by this enzyme is comparable to the overall rate of acetate incorporation into the triterpenoids suggesting that this enzyme is rate-determining in the biosynthesis of triterpenoids in E. lathyris latex. HMG-CoA reductase of E. lathyris vegetative tissue was localized to the membrane-bound portion of a particulate fraction (18,000g), and was solubilized by treatment with 2% polyoxyethylene ether W-1. Differences in the optimal pH for activity of HMG-CoA reductase from the latex and vegetative tissue suggest that isozymes of the enzyme may be present in the two tissue types. Studies of the incorporation of various precursors into leaf discs and cuttings taken from Copaifera spp. show differences in the rate of incorporation into Copaifera sesquiterpenes suggesting that the site of sesquiterpene biosynthesis may differ in its accessibility to the different substrates and/or reflecting the metabolic controls on carbon allocation to the terpenes. Mevalonate incorporation by Copaifera langsdorfii cuttings into sesquiterpenes was a hundred-fold greater than either acetate or glucose incorporation, however, its incorporation into squalene and triterpenoids was also a hundred-fold greater than the incorporation into sesquiterpenes. 119 refs., 58 figs., 16 tabs

  17. Terpenoid biosynthesis in Euphorbia lathyris and Copaifera spp

    Energy Technology Data Exchange (ETDEWEB)

    Skrukrud, C.L.

    1987-07-01

    Biosynthesis of triterpenoids by isolated latex of Euphorbia lathyris was investigated. The rate of in vitro incorporation of mevalonic acid into triterpenoids was thirty times greater than acetate incorporation indicating that the rate-limiting step in the pathway occurs prior to mevalonate. Both HMG-CoA reductase (EC 1.1.1.34) and HMG-CoA lyase (EC 4.1.3.4) activities were detected in isolated latex. HMG-CoA reductase was localized to a membrane-bound fraction of a 5000g pellet of latex. The rate of conversion of HMG-CoA to mevalonate by this enzyme is comparable to the overall rate of acetate incorporation into the triterpenoids suggesting that this enzyme is rate-determining in the biosynthesis of triterpenoids in E. lathyris latex. HMG-CoA reductase of E. lathyris vegetative tissue was localized to the membrane-bound portion of a particulate fraction (18,000g), and was solubilized by treatment with 2% polyoxyethylene ether W-1. Differences in the optimal pH for activity of HMG-CoA reductase from the latex and vegetative tissue suggest that isozymes of the enzyme may be present in the two tissue types. Studies of the incorporation of various precursors into leaf discs and cuttings taken from Copaifera spp. show differences in the rate of incorporation into Copaifera sesquiterpenes suggesting that the site of sesquiterpene biosynthesis may differ in its accessibility to the different substrates and/or reflecting the metabolic controls on carbon allocation to the terpenes. Mevalonate incorporation by Copaifera langsdorfii cuttings into sesquiterpenes was a hundred-fold greater than either acetate or glucose incorporation, however, its incorporation into squalene and triterpenoids was also a hundred-fold greater than the incorporation into sesquiterpenes. 119 refs., 58 figs., 16 tabs.

  18. Short-Term Effects of Reduced-Impact Logging on Copaifera spp. (Fabaceae Regeneration in Eastern Amazon

    Directory of Open Access Journals (Sweden)

    Carine Klauberg

    2017-07-01

    Full Text Available Timber management directly influences the population dynamics of tree species, like Copaifera spp. (copaíba, which provide oil-resin with ecological and economic importance. The aim of this study was to evaluate the structure and population dynamics of Copaifera in unmanaged and managed stands by reduced-impact logging (RIL in eastern Amazon in Pará state, Brazil. Based on a stem map of the study area, 40 Copaifera trees were randomly selected, where an equal number of trees were selected in managed and unmanaged stands. A transect of 10 × 100 m was centered at each tree (50 m each side to assess Copaifera regeneration. Transects were subdivided into ten plots, of which six were systematically chosen to assess the height, diameter and number of Copaifera seedlings and saplings. The field assessment occurred in 2011 and 2013. To estimate the amount of sunlight transmitted to the forest floor, we computed canopy cover from airborne LiDAR data. According to the results, the abundance of Copaifera seedlings/saplings was higher in managed than unmanaged stands. About 5% of Copaifera regeneration was found between 45–50 m from the Copaifera tree while ~73% of regeneration was concentrated within a 10 m radius of the Copaifera tree. We verified that the diameter distribution of Copaifera regeneration was not a negative exponential distribution, as is typical of most tree species in natural forest. Rather, the Copaifera regeneration had a spatially aggregated distribution. In this short-term analysis, the impact of timber management is not negatively affecting the population structure or dynamics of Copaifera regeneration.

  19. Short-term effects of reduced-impact logging on Copaifera spp. (Fabaceae) regeneration in eastern Amazon

    Science.gov (United States)

    Carine Klauberg; Edson Vidal; Carlos Alberto Silva; Andrew Thomas Hudak; Manuela Oliveira; Pedro Higuchi

    2017-01-01

    Timber management directly influences the population dynamics of tree species, like Copaifera spp. (copaíba), which provide oil-resin with ecological and economic importance. The aim of this study was to evaluate the structure and population dynamics of Copaifera in unmanaged and managed stands by reduced-impact logging (RIL) in eastern Amazon in Pará state, Brazil....

  20. Chemical constituents of the fruits of Copaifera langsdorffii Desf; Constituintes quimicos dos frutos de Copaifera langsdorffii Desf

    Energy Technology Data Exchange (ETDEWEB)

    Lima Neto, Jose de Sousa [Universidade Federal do Piaui, Teresina, PI (Brazil). Dept. de Quimica; Gramosa, Nilce Viana; Silveira, Edilberto Rocha [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil). Dept. de Quimica Organica e Inorganica]. E-mail: nilce@dqoi.ufc.br

    2008-07-01

    Phytochemical investigation of the hexane extract of fruit shells of Copaifera langsdorffii Desf. (Caesalpinioideae) afforded ent-kaur-16-en-19-oic acid, polyalthic acid, nivenolide and the mixture of caryophyllene oxide and ent-kaur-16-en-19-oic acid. The chloroform extract of unripe seeds led to the isolation of coumarin and the GC/MS analysis of the extract allowed the identification of 81.8% of the fatty acid composition after hydrolysis followed by methylation. The main fatty acid identified was oleic acid (33.1%). The isolation of all secondary metabolites was accomplished by modern chromatographic methods and the structure determination was accomplished by spectrometric methods (IR, MS, NMR {sup 1}H and {sup 13}C). (author)

  1. Composition and Antimicrobial Activity of Euphrasia rostkoviana Hayne Essential Oil

    OpenAIRE

    Novy, Pavel; Davidova, Hana; Serrano-Rojero, Cecilia Suqued; Rondevaldova, Johana; Pulkrabek, Josef; Kokoska, Ladislav

    2015-01-01

    Eyebright, Euphrasia rostkoviana Hayne (Scrophulariaceae), is a medicinal plant traditionally used in Europe for the treatment of various health disorders, especially as eyewash to treat eye ailments such as conjunctivitis and blepharitis that can be associated with bacterial infections. Some Euphrasia species have been previously reported to contain essential oil. However, the composition and bioactivity of E. rostkoviana oil are unknown. Therefore, in this study, we investigated the chemica...

  2. Spatial heterogeneity and its influence on Copaifera langsdorffii Desf. (Caesalpiniaceae

    Directory of Open Access Journals (Sweden)

    Júlio Carlos França Resende

    2003-06-01

    Full Text Available Population dynamics and structure of young individuals of the tree Copaifera langsdorffii Desf. (Caesalpiniaceae were studied in the gallery forest of the Panga Ecological Station, Uberlândia, MG, Brazil. Three distinct habitats were recognized in this forest, Dike, Middle and Edge zone. Four annual surveys of plant height, diameter at plant base and density were made between 1993 and 1996. The species showed an aggregated distribution in all three habitats. Population structure in all four surveys presented the typical reversed "J" form, characteristic of populations in local regeneration. For the whole population, mortality rates during the four years were constant and low (average of 4.8 % per year, while recruitment declined during the same period (average of 2.9 % per year. The C. langsdorffii seedling and sapling intraspecific density had a negative effect on growth, possibly due to the action of herbivores and pathogens.A estrutura e a dinâmica dos indivíduos jovens da espécie Copaifera langsdorffii Desf. (Caesapiniaceae foi estudada na mata de galeria da Estação Ecológica do Panga (Uberlândia, MG - Brasil. A mata de galeria neste estudo foi descrita como apresentando 3 ambientes: Dique, Meio e Borda. O trabalho de campo consistiu de quatro levantamentos, realizados anualmente entre 1993 e 1996. A população foi caracterizada como agrupada nos três ambientes. A estrutura de tamanho da população se apresentou como uma curva em "J" invertido, indicando regeneração local. As taxas de mortalidade foram constantes e baixas durante os quatro anos (4,8 % por ano, já as de recrutamento sofreram um declínio durante o mesmo período (2,9 % por ano. A densidade intraespecífica das plântulas e indivíduos jovens de C. langsdorffii tem um efeito negativo nas taxas de crescimento, possivelmente devido a ação de herbívoros e patógenos.

  3. Antifungal Activity of Copaifera langsdorffii Desf Oleoresin against Dermatophytes

    Directory of Open Access Journals (Sweden)

    Nádia R. B. Raposo

    2013-10-01

    Full Text Available Dermatophytoses are mycoses that affect keratinized tissues in both humans and animals. The aim of this study was to investigate the antifungal activity of the oleoresin extracted from Copaifera langsdorffii Desf. against the strains Microsporum canis ATCC 32903, Microsporum gypseum ATCC 14683, Trichophyton mentagrophytes ATCC 11481 and Trichophyton rubrum CCT 5507. The antimicrobial activity was determined by minimum inhibitory concentration (MIC and minimum fungicidal concentration (MFC values. Ketoconazole and terbinafine were used as reference drugs. The copaiba oleoresin showed moderate fungicidal activity against T. mentagrophytes ATCC 11481 (MIC and MFC = 170 μg mL−1 and weak fungicidal activity against T. rubrum CCT 5507 (MIC = 1,360 μg mL−1 and MFC = 2,720 μg mL−1. There was no activity against M. canis ATCC 32903 and M. gypseum ATCC 14683. SEM analysis revealed physical damage and morphological alterations such as compression and hyphae clustering in the structure of the fungi exposed to the action of the oleoresin. The results stimulate the achievement of in vivo assays to confirm the benefits of the application of oleoresin extracted from copaiba in the treatment of dermatophytosis, both in humans and in animals.

  4. In vitro antiplasmodial activity of crude extracts of Tetrapleura tetraptera and Copaifera religiosa

    Directory of Open Access Journals (Sweden)

    Lekana-Douki Jean

    2011-11-01

    Full Text Available Abstract Background Malaria remains a major public health problem, especially in tropical and subtropical regions because of the emergence and widespread of antimalarial drug resistance. Traditional medicine represents one potential source of new treatments. Here, we investigated the in vitro antiplasmodial activity of bark extracts from two Fabaceae species (Tetrapleura tertaptera and Copaifera religiosa traditionally used to treat malaria symptoms in Haut-Ogooué province, Gabon. Findings The antiplasmodial activity of dichloromethane and methanolic extracts was tested on P. falciparum strains FCB (chloroquine-resistant and 3D7 (chloroquine-sensitive and on fresh clinical isolates, using the DELI method. Host cell toxicity was analyzed on MRC-5 human diploid embryonic lung cells using the MTT test. The dichloromethane extracts of the two plants had interesting activity (IC50 between 8.5 ± 4.7 and 13.4 ± 3.6 μg/ml. The methanolic extract of Tetrapleura tetraptera was less active (IC50 around 30 μg/ml and the methanolic extract of Copaifera religiosa was inactive. The selectivity index (toxicity/antiplasmodial activity of the dichloromethane extract of Tetrapleura tetraptera was high (around 7, while the dichloromethane extract of Copaifera religiosa had the lowest selectivity (0.6. The mean IC50 values for field isolates were less than 1.5 μg/ml for dichloromethane extracts of both plants, while methanolic extracts of Tetrapleura tetraptera showed interesting activity (IC50 = 13.1 μg/ml. The methanolic extract of Copaifera religiosa was also inactive on field isolates. Conclusions Dichloromethane extracts of Tetrapleura tetraptera and Copaifera religiosa, two plants used to treat malaria in Gabon, had interesting antiplasmodial activity in vitro. These data provide a scientific rationale for the traditional use of these plants against malaria symptoms. Bioactivity-guided phytochemical analyses are underway to identify the active compounds.

  5. EFEITO DO COBRE SOBRE O CRESCIMENTO E QUALIDADE DE MUDAS DE Stryphnodendron polyphyllum Mart. E Cassia multijuga Rich.

    Directory of Open Access Journals (Sweden)

    Rodrigo Ferreira da Silva

    2014-09-01

    Full Text Available http://dx.doi.org/10.5902/1980509815730A contaminação do solo com cobre tem se tornado comum em regiões de mineração e agrícolas pelo uso de fungicidas a base de cobre e aplicação de dejeto líquido de suíno ao solo, causando redução na produtividade das plantas. O trabalho objetivou determinar o efeito de doses de cobre no crescimento e qualidade de mudas de Barbatimão (Stryphnodendron polyphyllum Mart. e Cássia (Cassia multijuga Rich.. O delineamento experimental foi inteiramente casualizado num fatorial (2 x 4, sendo as duas espécies florestais, e quatro doses de cobre: 0; 150; 300 e 450 mg kg-1, com 10 repetições. Avaliou-se a altura de planta, diâmetro do colo, peso da matéria seca radicular e da parte aérea, comprimento e área superficial específica radicular, e os índices de qualidade de mudas: relação entre altura da parte aérea e diâmetro do coleto; altura da parte aérea e peso da matéria seca da parte aérea e o Índice de Qualidade de Dickson. Os resultados demonstram que as doses de cobre testadas não influenciam a qualidade de mudas da Cássia enquanto o Barbatimão mantém a qualidade de mudas até 300 mg kg-1 de cobre adicionado ao solo. O Barbatimão apresenta maior crescimento e qualidade de mudas que a Cássia em solo contaminado com cobre.

  6. Gamma Prime Stability in Haynes 282: Theoretical and Experimental Considerations

    Science.gov (United States)

    Hawk, Jeffrey A.; Cheng, Tian-Le; Sears, John S.; Jablonski, Paul D.; Wen, You-Hai

    2015-11-01

    The life cycle requirements for advanced Ni alloys are very demanding and can be on the order of several hundreds of thousands of hours. Results are presented on a wrought Ni-based superalloy designed within the nominal chemistry range of Haynes 282 with a fixed amount of γ' strengthening phase, and either low Al or Ti (within the alloy specification) to give different ratios of Ti/Al, and thus, different γ' misfit with the γ matrix. The effect that these changes have on the γ' misfit and its relevance to long-term microstructural stability is being explored both experimentally as well as with computational modeling with results through almost 10,000 h. The basics of the modeling approach are presented as are the procedures for evaluating the γ' volume fractions from transmission electron microscopy (TEM) micrographs and correcting these volume fractions for truncation error due to TEM foil thickness. Results on each alloy formulation are compared and discussed with respect to possible γ' coarsening due to the different Ti/Al ratio and what this might mean for the long-term stability of the alloy.

  7. Elevated temperature axial and torsional fatigue behavior of Haynes 188

    Science.gov (United States)

    Bonacuse, Peter J.; Kalluri, Sreeramesh

    1992-06-01

    The results of high-temperature axial and torsional low-cycle fatigue experiments performed on Haynes 188, a wrought cobalt-base superalloy, are reported. Fatigue tests were performed at 760 C in air on thin-walled tubular specimens at various ranges under strain control. Data are also presented for coefficient of thermal expansion, elastic modulus, and shear modulus at various temperatures from room to 1000 C, and monotonic and cyclic stress-strain curves in tension and in shear at 760 C. The data set is used to evaluate several multiaxial fatigue life models (most were originally developed for room temperature multiaxial life prediction) including von Mises equivalent strain range (ASME boiler and pressure vessel code), Manson-Halford, Modified Multiaxiality Factor (proposed here), Modified Smith-Watson-Topper, and Fatemi-Socie-Kurath. At von Mises equivalent strain ranges (the torsional strain range divided by the square root of 3, taking the Poisson's ratio to be 0.5), torsionally strained specimens lasted, on average, factors of 2 to 3 times longer than axially strained specimens. The Modified Multiaxiality Factor approach shows promise as a useful method of estimating torsional fatigue life from axial fatigue data at high temperatures. Several difficulties arose with the specimen geometry and extensometry used in these experiments. Cracking at extensometer probe indentations was a problem at smaller strain ranges. Also, as the largest axial and torsional strain range fatigue tests neared completion, a small amount of specimen buckling was observed.

  8. Composition and Antimicrobial Activity of Euphrasia rostkoviana Hayne Essential Oil

    Science.gov (United States)

    Novy, Pavel; Davidova, Hana; Serrano-Rojero, Cecilia Suqued; Rondevaldova, Johana; Pulkrabek, Josef

    2015-01-01

    Eyebright, Euphrasia rostkoviana Hayne (Scrophulariaceae), is a medicinal plant traditionally used in Europe for the treatment of various health disorders, especially as eyewash to treat eye ailments such as conjunctivitis and blepharitis that can be associated with bacterial infections. Some Euphrasia species have been previously reported to contain essential oil. However, the composition and bioactivity of E. rostkoviana oil are unknown. Therefore, in this study, we investigated the chemical composition and antimicrobial activity of the eyebright essential oil against some organisms associated with eye infections: Enterococcus faecalis, Escherichia coli, Klebsiella pneumoniae, Staphylococcus aureus, S. epidermidis, Pseudomonas aeruginosa, and Candida albicans. GC-MS analysis revealed more than 70 constituents, with n-hexadecanoic acid (18.47%) as the main constituent followed by thymol (7.97%), myristic acid (4.71%), linalool (4.65%), and anethole (4.09%). The essential oil showed antimicrobial effect against all organisms tested with the exception of P. aeruginosa. The best activity was observed against all Gram-positive bacteria tested with the minimum inhibitory concentrations of 512 µg/mL. This is the first report on the chemical composition of E. rostkoviana essential oil and its antimicrobial activity. PMID:26000025

  9. Composition and Antimicrobial Activity of Euphrasia rostkoviana Hayne Essential Oil.

    Science.gov (United States)

    Novy, Pavel; Davidova, Hana; Serrano-Rojero, Cecilia Suqued; Rondevaldova, Johana; Pulkrabek, Josef; Kokoska, Ladislav

    2015-01-01

    Eyebright, Euphrasia rostkoviana Hayne (Scrophulariaceae), is a medicinal plant traditionally used in Europe for the treatment of various health disorders, especially as eyewash to treat eye ailments such as conjunctivitis and blepharitis that can be associated with bacterial infections. Some Euphrasia species have been previously reported to contain essential oil. However, the composition and bioactivity of E. rostkoviana oil are unknown. Therefore, in this study, we investigated the chemical composition and antimicrobial activity of the eyebright essential oil against some organisms associated with eye infections: Enterococcus faecalis, Escherichia coli, Klebsiella pneumoniae, Staphylococcus aureus, S. epidermidis, Pseudomonas aeruginosa, and Candida albicans. GC-MS analysis revealed more than 70 constituents, with n-hexadecanoic acid (18.47%) as the main constituent followed by thymol (7.97%), myristic acid (4.71%), linalool (4.65%), and anethole (4.09%). The essential oil showed antimicrobial effect against all organisms tested with the exception of P. aeruginosa. The best activity was observed against all Gram-positive bacteria tested with the minimum inhibitory concentrations of 512 µg/mL. This is the first report on the chemical composition of E. rostkoviana essential oil and its antimicrobial activity.

  10. Composition and Antimicrobial Activity of Euphrasia rostkoviana Hayne Essential Oil

    Directory of Open Access Journals (Sweden)

    Pavel Novy

    2015-01-01

    Full Text Available Eyebright, Euphrasia rostkoviana Hayne (Scrophulariaceae, is a medicinal plant traditionally used in Europe for the treatment of various health disorders, especially as eyewash to treat eye ailments such as conjunctivitis and blepharitis that can be associated with bacterial infections. Some Euphrasia species have been previously reported to contain essential oil. However, the composition and bioactivity of E. rostkoviana oil are unknown. Therefore, in this study, we investigated the chemical composition and antimicrobial activity of the eyebright essential oil against some organisms associated with eye infections: Enterococcus faecalis, Escherichia coli, Klebsiella pneumoniae, Staphylococcus aureus, S. epidermidis, Pseudomonas aeruginosa, and Candida albicans. GC-MS analysis revealed more than 70 constituents, with n-hexadecanoic acid (18.47% as the main constituent followed by thymol (7.97%, myristic acid (4.71%, linalool (4.65%, and anethole (4.09%. The essential oil showed antimicrobial effect against all organisms tested with the exception of P. aeruginosa. The best activity was observed against all Gram-positive bacteria tested with the minimum inhibitory concentrations of 512 µg/mL. This is the first report on the chemical composition of E. rostkoviana essential oil and its antimicrobial activity.

  11. Carbide Transformation in Haynes 230 during Long-term Exposure at High Temperature

    International Nuclear Information System (INIS)

    Lee, Ho Jung; Kim, Hyunmyung; Hong, Sunghoon; Jang, Changheui

    2014-01-01

    Long-term aging behaviors of a solid solution hardened Ni-base superalloy, Haynes 230 at high temperature have not been fully investigated yet. In this study, long-term aging tests of Haynes 230 was carried out to evaluate microstructure changes especially in carbide evolution. In addition, its consequential effects on tensile property such as tensile strength and elongation were discussed. In Haynes 230, a nucleation of the secondary carbides was dominant at 800 .deg. C ageing while growth at 900 .deg. C ageing. In addition, after aging at 800 .deg. C, transition of primary W-rich M 6 C carbides (break down) were observed and it showed high W content (up to 70 at.% W) compared to un-aged W-rich M 6 C carbides (around 30 at.% W). Coarsened Cr- and Ni-rich phase surrounded by carbide depleted region and high W-rich M 6 C carbide along the grain boundary were formed only at 900 .deg. C after long-term exposure above 10000 h. Tensile strength of aged Haynes 230 increased at 800 .deg. C while decreased at 900 .deg. C due to the formation of secondary carbide within the grains at 800 .deg. C. Decrease in elongation would be resulted from the coarsened and continuous carbides at the grain boundary as well as Cr- and Ni-rich phase along the grain boundary

  12. Extracts of Equisetum giganteum L and Copaifera reticulate Ducke show strong antiviral activity against the sexually transmitted pathogen herpes simplex virus type 2.

    Science.gov (United States)

    Churqui, Marianela Patzi; Lind, Liza; Thörn, Karolina; Svensson, Alexandra; Savolainen, Otto; Aranda, Katty Terrazas; Eriksson, Kristina

    2018-01-10

    Equisetum giganteum L and Copaifera reticulate Ducke have been traditionally used by women of the Tacana tribe in the Bolivian Amazonas for genital hygiene and for treatment of genital infection/inflammation. To assess the ability of extracts from Equisetum giganteum L and Copaifera reticulate Ducke to block genital viral infection by herpes simplex virus type 2. Equisetum giganteum L and Copaifera reticulate Ducke were collected from the Amazon region of La Paz, Bolivia. Extracts were prepared and screened for anti-viral activity against herpes simplex virus type 2 (HSV-2) using both in vitro and in in vivo models of infection. Equisetum giganteum L and Copaifera reticulate Ducke efficiently blocked HSV-2 infection of cell cultures without major cell cytotoxic effects. Extracts of Equisetum giganteum L and Copaifera reticulate Ducke could prevent HSV-2 disease development when administered together with virus in a mouse model of genital HSV-2 infection. In vitro analyses revealed that both plant extracts exerted their anti-HSV-2 effects by interfering with viral cell attachment and entry, but could not block viral replication post entry. These studies show that extracts of Equisetum giganteum L and Copaifera reticulate Ducke have potent antiviral activities against HSV-2 comparable to those two previously identified plants, Croton lechleri Müll. Arg. and Uncaria tomentosa (Willd. ex Schult.) DC. These studies confirm that plants used by the Tacana tribe could be explored further for the development of novel topical antiviral microbicides. Copyright © 2017. Published by Elsevier B.V.

  13. Nonannual tree rings in a climate-sensitive Prioria copaifera chronology in the Atrato River, Colombia.

    Science.gov (United States)

    Herrera-Ramirez, David; Andreu-Hayles, Laia; Del Valle, Jorge I; Santos, Guaciara M; Gonzalez, Paula L M

    2017-08-01

    In temperate climates, tree growth dormancy usually ensures the annual nature of tree rings, but in tropical environments, determination of annual periodicity can be more complex. The purposes of the work are as follows: (1) to generate a reliable tree-ring width chronology for Prioria copaifera Griseb. (Leguminoceae), a tropical tree species dwelling in the Atrato River floodplains, Colombia; (2) to assess the climate signal recorded by the tree-ring records; and (3) to validate the annual periodicity of the tree rings using independent methods. We used standard dendrochronological procedures to generate the P. copaifera tree-ring chronology. We used Pearson correlations to evaluate the relationship of the chronology with the meteorological records, climate regional indices, and gridded precipitation/sea surface temperature products. We also evaluated 24 high-precision 14 C measurements spread over a range of preselected tree rings, with assigned calendar years by dendrochronological techniques, before and after the bomb spike in order to validate the annual nature of the tree rings. The tree-ring width chronology was statistically reliable, and it correlated significantly with local records of annual and October-December (OND) streamflow and precipitation across the upper river watershed (positive), and OND temperature (negative). It was also significantly related to the Oceanic Niño Index, Pacific Decadal Oscillation, and the Southern Oscillation Index, as well as sea surface temperatures over the Caribbean and the Pacific region. However, 14 C high-precision measurements over the tree rings demonstrated offsets of up to 40 years that indicate that P. copaifera can produce more than one ring in certain years. Results derived from the strongest climate-growth relationship during the most recent years of the record suggest that the climatic signal reported may be due to the presence of annual rings in some of those trees in recent years. Our study alerts about

  14. SEED, SEEDLINGS AND GERMINATION MORPHOLOGY OF Copaifera langsdorfii Desf. (Leguminosae-Caesalpinioideae

    Directory of Open Access Journals (Sweden)

    Maria Elane de Carvalho Guerra

    2006-12-01

    Full Text Available The knowledge of seed and seedling morphology are extremely important to the identification and preservation of plant species. In order to studying seed and seedling morphology and seed germination of copaiba (Copaifera langsdorfii Desf seeds, experiments were conducted at the Laboratory of Seed Analysis and Laboratory of Botany of the Federal University of Ceará. In copaíba seeds the characteristics studied were shape, size (length, width, thickness and morphology. The kind of germination, the root systems, hypocotyls, epicotyls and first leaves were the characteristics evaluated in copaiba seedlings. Ruler and pachimeter were used to make the measurements, as well as optical microscope and magnifying glass. The seeds are exalbumin kind, have neuter photoblastism and epigeous germination. Seed coat shows a palisade cell layer with a conspicuous light line. The seedlings have compound first leaves and axial root system.

  15. Copaifera cf. langsdorfii Desf. AND Dipteryx odorata (Aubl. Wild. CHARCOAL ANATOMY

    Directory of Open Access Journals (Sweden)

    Francielli Rodrigues Ribeiro Batista

    2012-11-01

    Full Text Available Species discrimination by charcoal analysis is possible, because the wood anatomical structure remains almost intact after carbonization process. Studies in this area are rare and directed to paleoecology and paleoetnobotany. Thus, this study aimed to characterize anatomically the carbonized wood of Copaifera cf. langsdorfii Desf. and Dipteryx odorata (Aubl. Wild., proceeding from north region of Mato Grosso state, in order to provide information to manage its illegal commerce. From each species were carbonized ten samples with dimensions of 2 x 2 x 5 cm in muffle furnace, in stage program and highest temperature of 450°C for 30 minutes, for seven hours. Final temperature applied does not change anatomical structure from both species, allowing its differentiation. The crystals formatremained without alterations, being visible little split.

  16. Effects of long-term high temperature exposure on the microstructure of Haynes alloy 230

    Energy Technology Data Exchange (ETDEWEB)

    Veverkova, J.; Strang, A.; Atkinson, H.V. [Leicester Univ. (United Kingdom). Dept. of Engineering; Marchant, G.R. [Siemens Industrial Turbomachinery Ltd., Lincoln (United Kingdom)

    2010-07-01

    Haynes Alloy 230 was specifically designed to have excellent long-term thermal stability and resistance to the precipitation of damaging phases. This paper describes in detail studies on the effects of long-term high temperature exposure on the hardness, microstructural changes and tensile properties of thermally exposed samples of Haynes Alloy 230. The samples from the 2mm thick sheet material have been investigated using X-Ray diffraction and advanced electron microscopy techniques (FEGSEM, TEM etc.). The evolution of the precipitating phases was monitored across a wide range of temperatures (from 500 C to 1170 C) and durations (from 24 hours up to 30000 hours) and several key phases have been identified. In addition to the primary W-rich carbide and the precipitation of Cr-rich M{sub 23}C{sub 6}, a new brittle phase/carbide was observed within the microstructure at the highest exposure temperatures (above 930 C). (orig.)

  17. Flood-promoted vessel formation in Prioria copaifera trees in the Darien Gap, Colombia.

    Science.gov (United States)

    López, Janeth; Del Valle, Jorge I; Giraldo, Jorge A

    2014-10-01

    Trees growing in floodplains develop mechanisms by which to overcome anoxic conditions. Prioria copaifera Griseb. grows on the floodplains of the Atrato River, Colombia, and monodominant communities of this species remain flooded for at least 6 months a year. The aims of this study were as follows: (i) to compare variations in tree-ring structure with varying river water levels; and (ii) to reconstruct variations in water levels from the chronology of variations in the porosity of the tree rings. Discs were taken from 12 trees, and the number of vessels along 3-mm-wide radial transects was counted. Standard dendrochronological techniques were used to determine the mean number of vessels over 130 years, between 1877 and 2006; the signal-to-noise ratio was 13.3 and the expressed population signal 0.93. Furthermore, this series of vessel numbers was calibrated against variations in the water levels between 1977 and 2000; positive correlations were found with the mean for both the annual river water level and the level from June to August. The transfer function between the principal components of the mean annual water level and those of chronology allowed us to reconstruct the river levels over 130 years. Our conclusions are as follows: (i) the number of vessels per ring is an appropriate proxy for determining variations in water levels; and (ii) P. copaifera grows thicker and produces more vessels when water levels rise. The probable ecophysiological causes of this interesting behaviour are discussed. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  18. Thermo-Viscoplastic Behavior of Ni-Based Superalloy Haynes 282 and Its Application to Machining Simulation

    Directory of Open Access Journals (Sweden)

    Marcos Rodríguez-Millán

    2017-12-01

    Full Text Available Ni-based superalloys are extensively used in high-responsibility applications in components of aerospace engines and gas turbines with high temperature service lives. The wrought, γ’-strengthened superalloy Haynes 282 has been recently developed for applications similar to other common superalloys, such as Waspaloy or Inconel 718, with improved creep behavior, thermal stability, and fabrication ability. Despite the potential of Haynes 282, there are still important gaps in the knowledge of the mechanical behavior of this alloy. In fact, it was not possible to find information concerning the mechanical behavior of the alloy under impulsive loading. This paper focuses on the mechanical characterization of the Haynes 282 at strain rates ranging from 0.1 to 2800 s−1 and high temperatures ranging from 293 to 523 K using Hopkinson bar compression tests. The experimental results from the thermo-mechanical characterization allowed for calibration of the Johnson–Cook model widely used in modeling metallic alloy’s responses under dynamic loading. Moreover, the behavior of Haynes 282 was compared to that reported for Inconel 718, and the results were used to successfully model the orthogonal cutting of Haynes 282, being a typical case of dynamic loading requiring previous characterization of the alloy.

  19. Estudio del crecimiento de Prioria copaifera (Caesalpinaceae mediante técnicas dendrocronológicas

    Directory of Open Access Journals (Sweden)

    Jorge Andrés Giraldo Jiménez

    2011-12-01

    Full Text Available El cativo (Prioria copaifera G. forma bosques dominados por la especie llamados cativales. Durante más de 70 años el cativo ha sido la base principal de la industria maderera en el Darién colombiano, siendo, por su alta productividad y dominancia uno de los bosques tropicales más fáciles de ordenar sosteniblemente. El propósito de esta investigación es modelar el crecimiento del diámetro y el volumen del cativo en función de la edad así como las tasas instantáneas, medias y relativas, empleando anillos de crecimiento. La anualidad de los anillos se demostró usando el efecto de las bombas nucleares y mediante cofechado. Con base en los anillos de crecimiento radiales se modelo el crecimiento del diámetro y del volumen. Esta especie alcanza 40cm de diámetro en 90 años y presenta crecimiento medio de 0.31cm/año. El lapso vital de la especie es de aproximadamente 614 años. El incremento corriente anual máximo del volumen a los 90 años es 0.033m3/año, e iguala al incremento medio a los 145 años con 0.018m3/año. La tasa media de crecimiento absoluta es 0.021m3/año. Los resultados aquí obtenidos sirven como base técnica para el manejo sostenible de los cativales.A growth study of Prioria copaifera (Caesalpinaceae using dendrochronological techniques. The Cativo (Prioria copaifera forms very homogeneous forests called cativales in the flooded plains of some rivers from Costa Rica to Colombia. For over 70 years Cativo has been the main base of the timber industry in the Colombian Darien area. Because of high productivity and high-dominance of Cativo trees, they represent one of the most prone tropical forests for sustainable forest management. The objective of this research is to model diameter and timber volume growth and growth rates (absolute, mean and relative of Cativo as a function of age, using tree ring data derived from dendrochronologycal techniques. We evaluated the annual nature of the tree rings by radiocarbon

  20. HAYNES 244 alloy – a new 760 ∘C capable low thermal expansion alloy

    Directory of Open Access Journals (Sweden)

    Fahrmann Michael G.

    2014-01-01

    Full Text Available HAYNES® 244TM alloy is a new 760∘C capable, high strength low thermal expansion (CTE alloy. Its nominal chemical composition in weight percent is Ni – 8 Cr – 22.5 Mo – 6 W. Recently, a first mill-scale heat of 244 alloy was melted by Haynes International, and processed to various product forms such as re-forge billet, plate, and sheet. This paper presents key attributes of this new alloy (CTE, strength, low-cycle fatigue performance, oxidation resistance, thermal stability as they pertain to the intended use in rings and seals of advanced gas turbines.

  1. Optimization of Cutting Parameters of the Haynes 718 Nickel Alloy With Gas CO2 Laser

    Directory of Open Access Journals (Sweden)

    Jana PETRŮ

    2011-06-01

    Full Text Available This article deals with the application of laser technology and the optimization of parameters in the area of nickel alloy laser cutting intended for application in the aircraft industry. The main goal is to outline possibilities of use of the laser technology, primarily its application in the area of 3D material cutting. This experiment is focused on the optimization of cutting parameters of the Haynes 718 alloy with a gas CO2 laser. Originating cuts are evaluated primarily from the point of view of cut quality and accompanying undesirable phenomena occurring in the process of cutting. In conclusion the results achieved in the metallographic laboratory are described and analyzed.

  2. Cytological and histochemical gradients on two Copaifera langsdorffii Desf. (Fabaceae)--Cecidomyiidae gall systems.

    Science.gov (United States)

    de Oliveira, Denis Coelho; Carneiro, Renê Gonçalves da Silva; Magalhães, Thiago Alves; Isaias, Rosy Mary dos Santos

    2011-10-01

    Previous ultrastructural and histochemical analysis proposed patterns in the accumulation of substances in galls of Diptera: Cecidomyiidae in some plant species of the temperate region. Similar analyses were done to verify the conservativeness of these patterns in the Neotropical region, where a great number of species of Cecidomyiidae is responsible for a wide diversity of morphotypes. Two gall morphotypes induced by Cecidomyiidae in a unique host plant, Copaifera langsdorffii, were studied. The gradients of carbohydrates and the activity of invertases and acid phosphatases were similar, but the cytological gradients and distribution of proteins evidenced that the sites of the induction as well as the amount of neoformed tissues may be peculiar to each gall system. The production of lipids just in the secretory cavities either in the non-galled or galled tissues indicated a potentiality of the host plant which could not be manipulated by the galling insects. Further, the absence of nucleus in the nutritive tissue, an exclusive feature of the horn-shaped galls, indicates cell death attributed to the feeding habit of the galling herbivore.

  3. EVALUATION OF CELL CYCLE OF Aspergillus nidulans EXPOSED TO THE EXTRACT OF Copaifera officinalis L PLANT

    Directory of Open Access Journals (Sweden)

    Simone Jurema Ruggeri Chiuchetta, Uériton Dias de Oliveira e Josy Fraccaro de Marins

    2006-12-01

    Full Text Available The oil extracted from the Copaifera officinalis L plant has been used in popular medicine to the treatment of several diseases, like cancer. In eukaryotic cells, the process of cellular proliferation follows a standard cycle, named cellular cycle. The transformation of a normal cell in a malignant one requires several steps, in which genes that control normal cellular division or cellular death are modified. Aspergillus nidulans fungus is an excellent system for the study of the cellular differentiation. Its asexual cycle results in the formation of conidia, which are disposed like chains, constituting a structure named conidiophore. This structure consists in an aerial hifae, multinucleate vesicle and uninucleate cells. Current research evaluated the capacity of the C. officinalis L plant extract in promoting alterations in the cellular cycle of A. nidulans diploid strains, by observing macroscopic and microscopic alterations in cellular growth of this fungus. Results shown that no macroscopic alterations were observed in cellular growth of strains exposed to the extract, however, microscopic alterations of conidiophore have been observed in the different extract concentrations analyzed. In this way, the study of the action of C. officinalis L plant extract becomes important considering the fact that this substance is capable to promote alterations in cellular cycle of eukaryotic cells.

  4. In vivo evaluation of the mutagenic potential and phytochemical characterization of oleoresin from Copaifera duckei Dwyer

    Directory of Open Access Journals (Sweden)

    Edson Luis Maistro

    2005-12-01

    Full Text Available We characterized the chemical constituents of Copaifera duckei oleoresin and used dermal application to Wistar rats to evaluated its possible mutagenic and cytotoxic activities on peripheral blood reticulocytes and bone marrow cells. Chemical characterization of the oleoresin revealed the presence of sesquiterpene hydrocarbons, an unidentified neutral diterpene and diterpene acids. To evaluate mutagenicity evaluation the rats were treated with 10, 25 and 50% of the LD50 dose of the oleoresin for three consecutive days and peripheral blood collected after 0, 24, 48 and 72 h for micronucleus analysis. The rats were humanly sacrificed 24 hours after the last treatment and chromosome preparations made using standard techniques. At the three concentrations and the three time intervals tested we found that there were no statistically significant differences in either the mean number of micronucleated reticulocytes (MNRETs or the number of chromosomal aberrations as to the negative control. However, at 25 and 50% of the LD50 dose of the oleoresin there was a significant decrease in the mitotic index (MI as compared to the negative control. Under our experimental conditions, C. duckei V11 oleoresin produced no mutagenic effects on bone marrow cells or in peripheral reticulocytes as assessed by chromosome aberrations and the micronucleus test respectively, but showed cytotoxic activity at high doses.

  5. WATER DEFICIT ENSURES THE PHOTOCHEMICAL EFFICIENCY OF Copaifera langsdorffii Desf1

    Directory of Open Access Journals (Sweden)

    Angélica Lino Rodrigues

    2017-02-01

    Full Text Available ABSTRACT The intensity and frequency of drought periods has increased according to climate change predictions. The fast overcome and recovery are important adaptive features for plant species found in regions presenting water shortage periods. Copaifera langsdorffii is a neotropical species that has developed leaves presenting physiological mechanisms and morphological adaptations that allow its survival under seasonal water stress. We aimed in this work to observe substantial physiological responses for water saving and damage representative to the photochemical reaction after exposed plants to water stress and to subsequent recovery. We found in plants mechanisms to control water loss through the lower stomatal conductance, even after rehydration. It goes against the rapid recovery of leaves, indicated by the relative water content values restored to previously unstressed plants. Stomatal conductance was the only variable presenting high plasticity index. In photochemical activity, the species presented higher photochemical quenching, electron transport rate and effective quantum yield of photosystem II when they were subjected to rehydration after water stress period. Our results suggest that C. langsdorffii presented rapid rehydration and higher photochemical efficiency even after water restriction. These data demonstrate that this species can be used as a model for physiological studies due to the adjustment developed in response to different environmental schemes.

  6. Antimicrobial Evaluation of Diterpenes from Copaifera langsdorffii Oleoresin Against Periodontal Anaerobic Bacteria

    Directory of Open Access Journals (Sweden)

    Rodrigo C. S. Veneziani

    2011-11-01

    Full Text Available The antimicrobial activity of four labdane-type diterpenes isolated from the oleoresin of Copaifera langsdorffii as well as of two commercially available diterpenes (sclareol and manool was investigated against a representative panel of microorganisms responsible for periodontitis. Among all the evaluated compounds, (−-copalic acid (CA was the most active, displaying a very promising MIC value (3.1 µg mL−1; 10.2 µM against the key pathogen (Porphyromonas gingivalis involved in this infectious disease. Moreover, CA did not exhibit cytotoxicity when tested in human fibroblasts. Time-kill curve assays performed with CA against P. gingivalis revealed that this compound only inhibited the growth of the inoculums in the first 12 h (bacteriostatic effect. However, its bactericidal effect was clearly noted thereafter (between 12 and 24 h. It was also possible to verify an additive effect when CA and chlorhexidine dihydrochloride (CHD, positive control were associated at their MBC values. The time curve profile resulting from this combination showed that this association needed only six hours for the bactericidal effect to be noted. In summary, CA has shown to be an important metabolite for the control of periodontal diseases. Moreover, the use of standardized extracts based on copaiba oleoresin with high CA contents can be an important strategy in the development of novel oral care products.

  7. Antiedematogenic Evaluation of Copaifera langsdorffii Leaves Hydroethanolic Extract and Its Major Compounds

    Directory of Open Access Journals (Sweden)

    Ricardo Andrade Furtado

    2015-01-01

    Full Text Available Inflammatory disorders affect many people worldwide, and medicinal plants are used to ameliorate these health problems. This paper reports the antiedematogenic and analgesic evaluation of Copaifera langsdorffii Desf. leaves hydroethanolic extract (Cop and two of its isolated compounds: quercetin-3-O-α-L-rhamnopyranosyl (quercitrin and kaempferol-3-O-α-L-rhamnopyranosyl (afzelin. For that, the following experimental protocols were undertaken locomotor performance, writhing induced by acetic acid, antinociceptivity induced by formalin, hot plate latency, paw oedema induced by carrageenan and dextran, and cell migration induced by lipopolysaccharide (LPS, as well as the measurement of nitric oxide (NO, tumor necrosis factor alpha (TNF-α, interleukin 6 (IL-6, and interleukin 10 (IL-10 in macrophages. Neither the extract nor the isolated compounds displayed analgesic activity. The obtained results showed that C. langsdorffii extract possesses antiedematogenic properties acting on peripheral sites, whereas quercitrin and afzelin are not involved. Moreover, these properties are not associated with cell migration inhibition, TNF-α, IL-6, or IL-10 regulation.

  8. Copaifera langsdorffii: evaluation of potential gastroprotective of extract and isolated compounds obtained from leaves

    Directory of Open Access Journals (Sweden)

    Marivane Lemos

    Full Text Available AbstractGastric ulcer is a prevalent gastrointestinal disease, and the drugs currently used in the treatment produce several adverse effects. In this context, the search for new therapeutic antiulcer agents is essential, and medicinal plants have great potential. Here, we investigated the gastroprotective properties of Copaifera langsdorffii Desf., Fabaceae, hydroalcoholic extract obtained from leaves and its isolated compounds. The phytochemistry studies and the compounds isolations were performed using chromatographic and spectroscopic methodologies. The hydroalcoholic extract was evaluated using ethanol/HCl, non-steroidal anti-inflammatory drug, stress-induced-ulcer and chronic ulcer-model. The effects on gastric content volume, pH, total acidity and mucus stomach production were evaluated in the pylorus ligated-model. The C. langsdorffii extract obtained from leaves (50, 250 or 500 mg/kg reduced the injured area compared to control group in all experiments. The extract showed a significant decrease in the total gastric juice acidity and an increase in mucus production (500 mg/kg when compared to vehicle. Among isolated compounds (30 mg/kg α-humulene, β-caryophyllene and caryophyllene oxide showed greater gastroprotective activity in the ethanol/HCl induced ulcer model. The data herein obtained shown that C. langsdorffii leaves extract and isolated compounds from it, presented gastroprotective properties in different animal models of gastric ulcer. These effects may be associated with the ability of the extract to decrease gastric secretion and increase the mucus production.

  9. Composición fisicoquímica de la semilla y del aceite de la semilla del Canime (Copaifera officinalis L) Physicochemical composition of the seed and oil of Canime seed (Copaifera officinalis L)

    OpenAIRE

    Jennifer J Lafont; Manuel S Páez; Edineldo Lans

    2011-01-01

    Se han determinado las características morfológicas, composición proximal y cantidad de minerales presentes en la semilla de canime (Copaifera officinalis L) y de su aceite. También se han determinado algunas características fisicoquímicas y el perfil de ácidos grasos, no reportados aún en la literatura. Las semillas fueron trituradas el aceite fue obtenido por extracción soxhlet con diferentes solventes para encontrar el de mejor rendimiento. Se analizó: índice de yodo, acidez, puntos de flu...

  10. Logging impacts on forest structure and seedling dynamics in a Prioria copaifera (Fabaceae) dominated tropical rain forest (Talamanca, Costa Rica).

    Science.gov (United States)

    Valverde-Barrantes, Oscar J; Rocha, Oscar J

    2014-03-01

    The factors that determine the existence of tropical forests dominated by a single species (monodominated forests) have been the subject of debate for a long time. It has been hypothesized that the low frequency of disturbances in monodominated forests and the tolerance to shade of the monodominant species are two important factors explaining the prolonged dominance of a single species. We determined the role of these two factors by examining the effects of logging activities on the floristic composition and seedling dynamics in a Prioria copaifera dominated forest in Southeastern Costa Rica. We determined the floristic composition for trees > or = 2.5cm DBH and the associated recruitment, survival and mortality of tree canopy seedlings in two sites logged two (L-02) and 12 years (L-12) prior to sampling and an unlogged forest (ULF). Our results showed that L-02 stands had lower species richness (25 species) than the L-12 and ULF stands (49 and 46 species, respectively). As expected, we found significant logging effects on the canopy structure of the altered forests, particularly when comparing the L-02 and the ULF stands. Seedling density was higher in ULF (0.96 seedlings/ m2) than in the L-02 and L-12 stands (0.322 and 0.466 seedlings/m2, respectively). However, seedling mortality was higher in the ULF stands (54%) than in the L-02 (26%) and L-12 (15%) stands. P. macroloba in L-02 was the only species with abundant regeneration under P. copaifera in L-02 stand, where it accounted for 35% of the seedlings. Despite the reduction in seedling abundance observed after logging, P. copaifera seems to maintain large seedling populations in these forests, suggesting that this species maintains its dominance after logging disturbances. Our findings challenge the hypothesis that the regeneration of monodominant species is not likely to occur under heavily disturbed canopy conditions.

  11. Logging impacts on forest structure and seedling dynamics in a Prioria copaifera (Fabaceae dominated tropical rain forest (Talamanca, Costa Rica

    Directory of Open Access Journals (Sweden)

    Oscar J. Valverde-Barrantes

    2014-03-01

    Full Text Available The factors that determine the existence of tropical forests dominated by a single species (monodominated forests have been the subject of debate for a long time. It has been hypothesized that the low frequency of disturbances in monodominated forests and the tolerance to shade of the monodominant species are two important factors explaining the prolonged dominance of a single species. We determined the role of these two factors by examining the effects of logging activities on the floristic composition and seedling dynamics in a Prioria copaifera dominated forest in Southeastern Costa Rica. We determined the floristic composition for trees ≥2.5cm DBH and the associated recruitment, survival and mortality of tree canopy seedlings in two sites logged two (L-02 and 12 years (L-12 prior to sampling and an unlogged forest (ULF. Our results showed that L-02 stands had lower species richness (25 species than the L-12 and ULF stands (49 and 46 species, respectively. As expected, we found significant logging effects on the canopy structure of the altered forests, particularly when comparing the L-02 and the ULF stands. Seedling density was higher in ULF (0.96 seedlings/m² than in the L-02and L-12 stands (0.322 and 0.466 seedlings/m², respectively. However, seedling mortality was higher in the ULF stands (54% than in the L-02 (26% and L-12 (15% stands. P. macroloba in L-02 was the only species with abundant regeneration under P. copaifera in L-02 stand, where it accounted for 35% of the seedlings. Despite the reduction in seedling abundance observed after logging, P. copaifera seems to maintain large seedling populations in these forests, suggesting that this species maintains its dominance after logging disturbances. Our findings challenge the hypothesis that the regeneration of monodominant species is not likely to occur under heavily disturbed canopy conditions. Rev. Biol. Trop. 62 (1: 347-357. Epub 2014 March 01.

  12. Chemical constituents in the Peedee and Castle Hayne aquifers: Porters Neck area, New Hanover County, North Carolina

    Science.gov (United States)

    Roberts, T.L.; Harris, W.B.

    2004-01-01

    Concerns about overuse and potential contamination of major aquifers in the southeastern part of North Carolina resulted in the initiation of a subsurface water quality study in February 2001. The focus of this study was to examine variations in nutrients (NO3-, TRP, SO42- Cl-, NH4+) and total dissolved Fe in the Cretaceous Peedee and Tertiary Castle Hayne Limestone aquifers of northeastern New Hanover County. Water samples were collected monthly for one year from sixteen wells located in the Porters Neck area (west of the Intracoastal Waterway and south of Futch Creek) and four springs located on the south side of Futch Creek. Variations in selective nutrient concentrations were measured between and within each aquifer. Concentrations of NH4+ and Fe increased in the Peedee sandstone aquifer during the warmer summer and early fall months. In late summer to early fall, Fe, NO 3-, NH4+, and TRP concentrations in the Castle Hayne Limestone aquifer were significantly higher than in the spring and winter months. Chloride and SO 42- concentrations for the Castle Hayne Limestone aquifer both increased during the warmer months, probably as a result of saltwater intrusion. Factors considered for nutrient and Fe variance include: temperature variation, anaerobic conditions, subsurface stratigraphy/structure, recharge locations, site location and surface fertilization. The shallower Castle Hayne Limestone aquifer showed seasonal variability in the study area, whereas the Peedee sandstone aquifer showed little to no seasonal variability. Increases in NO3- and TRP lagged slightly behind periods of high fertilization and were more prevalent down-dip of a major golf course. Nutrient content and seasonal variation of Futch Creek springs indicated that they originate from the Castle Hayne Limestone aquifer.

  13. Estudio del crecimiento de Prioria copaifera (Caesalpinaceae mediante técnicas dendrocronológicas

    Directory of Open Access Journals (Sweden)

    Jorge Andrés Giraldo Jiménez

    2011-12-01

    Full Text Available El cativo (Prioria copaifera G. forma bosques dominados por la especie llamados cativales. Durante más de 70 años el cativo ha sido la base principal de la industria maderera en el Darién colombiano, siendo, por su alta productividad y dominancia uno de los bosques tropicales más fáciles de ordenar sosteniblemente. El propósito de esta investigación es modelar el crecimiento del diámetro y el volumen del cativo en función de la edad así como las tasas instantáneas, medias y relativas, empleando anillos de crecimiento. La anualidad de los anillos se demostró usando el efecto de las bombas nucleares y mediante cofechado. Con base en los anillos de crecimiento radiales se modelo el crecimiento del diámetro y del volumen. Esta especie alcanza 40cm de diámetro en 90 años y presenta crecimiento medio de 0.31cm/año. El lapso vital de la especie es de aproximadamente 614 años. El incremento corriente anual máximo del volumen a los 90 años es 0.033m3/año, e iguala al incremento medio a los 145 años con 0.018m3/año. La tasa media de crecimiento absoluta es 0.021m3/año. Los resultados aquí obtenidos sirven como base técnica para el manejo sostenible de los cativales.

  14. Water deficit modifies the carbon isotopic composition of lipids, soluble sugars and leaves of Copaifera langsdorffii Desf. (Fabaceae

    Directory of Open Access Journals (Sweden)

    Angelo Albano da Silva Bertholdi

    2017-11-01

    Full Text Available ABSTRACT Water deficit is most frequent in forest physiognomies subjected to climate change. As a consequence, several tree species alter tissue water potential, gas exchange and production of carbon compounds to overcome damage caused by water deficiency. The working hypothesis, that a reduction in gas exchange by plants experiencing water deficit will affect the composition of carbon compounds in soluble sugars, lipids and vegetative structures, was tested on Copaifera langsdorffii. Stomatal conductance, leaf water potential, and CO2 assimilation rate declined after a period of water deficit. After rehydration, leaf water potential and leaf gas exchange did not recover completely. Water deficit resulted in 13C enrichment in leaves, soluble sugars and root lipids. Furthermore, the amount of soluble sugars and root lipids decreased after water deficit. In rehydration, the carbon isotopic composition and amount of root lipids returned to levels similar to the control. Under water deficit, 13C-enriched in root lipids assists in the adjustment of cellular membrane turgidity and avoids damage to the process of water absorption by roots. These physiological adjustments permit a better understanding of the responses of Copaifera langsdorffi to water deficit.

  15. Micodiversidade Associada a Árvores de Copaifera langsdorffii Desf. em Brasília, Distrito Federal

    Directory of Open Access Journals (Sweden)

    Marcelo Tavares de Castro

    Full Text Available Estudos com vista a ampliar o conhecimento sobre as espécies fúngicas associadas a plantas nativas do Cerrado bem como a treinar recursos humanos capazes de identificar e conservar a diversidade de fungos nesse ecossistema são de fundamental importância, principalmente quando se analisa a magnitude da micobiota, sua riqueza de espécies e diversidade de habitat. Com base nisso, este trabalho teve como objetivo definir o conjunto de espécies fúngicas associadas à Copaifera langsdorffii (copaíba, levando a uma ampliação do conhecimento micológico regional. Para tanto, foram coletadas amostras de ramos e folhas de copaíba com sintomas e sinais de fungo em Brasília, Distrito Federal, e a micobiota associada foi identificada com o auxílio de chaves apropriadas. Como resultado, oito fungos foram encontrados: Diorchidium copaifera, prováveis novas espécies de Stigmopeltis, Geastrumia, Metathyriella, Treubiomyces e Leptosphaeria, e dois prováveis gêneros novos do grupo dos celomicetos. A partir desse estudo é possível inferir que há uma grande diversidade de fungos em árvores do Cerrado e que sua micobiota ainda foi pouco explorada e identificada.

  16. Superação de dormência na qualidade de sementes e mudas: influência na produção de Senna multijuga (L. C. Rich. Irwin & Barneby Overcoming of dormancy in the quality of seeds and seedlings: influence in the production of Senna multijuga (L.C. Rich. Irwin & barneby

    Directory of Open Access Journals (Sweden)

    Graziela Piveta

    2010-01-01

    Full Text Available O objetivo deste trabalho foi determinar a qualidade fisiológica e sanitária de sementes de Senna multijuga(L. C. Rich. Irwin & Barneby relacionada aos métodos de superação de dormência e à interferência na produção de mudas. As sementes foram submetidas aos seguintes métodos: imersão em água fervente, as sementes foram imersas em água, com temperatura de 100°C, até esfriar, por 24 horas; escarificação ácida, onde as sementes foram imersas em ácido sulfúrico (H2SO4 a 90%, por 10 e 20 minutos, e testemunha (sem tratamento. Foram realizados os testes de sanidade, germinação, tetrazólio e avaliação da qualidade das mudas. O delineamento experimental foi inteiramente casualizado. Para a avaliação da germinação foi utilizado um esquema fatorial (4 X 2, com quatro métodos de superação de dormência X dois fotoperíodos, para os substratos rolo-de-papel e vermiculita. A escarificação ácida constituiu-se no método mais eficiente para a superação da dormência das sementes de Senna multijuga. Penicillium sp. e Aspergillus sp. tiveram sua incidência aumentada quando o tegumento foi danificado pela escarificação ácida por 20 minutos. O controle de Fusarium spp. aumentou gradativamente com o aumento do tempo de exposição ao ácido sulfúrico.The objective of this work was to determine the physiological and sanitary quality of Senna multijugaseeds related to the methods of dormancy overcoming and the influence on the seedlings quality. The seeds had been submitted to the following methods :immersion in water fervent, the seeds had been immersed in water, at 100°C, until cooling for 24 hours; acid escarification, where the seeds had been immersed in sulfuric acid (H2SO4 90%, for 10 and 20 minutes, and control (without treatment. The tests of sanity, germination and tetrazolium had been carried through, and were evaluated the quality of the seedlings. For the germination of the evaluation an factorial project was

  17. The influence of cooling rate from annealing temperature on the microstructure of Haynes 230

    International Nuclear Information System (INIS)

    Sah, Injin; Hong, Sunghoon; Jang, Changheui

    2015-01-01

    The effects of cooling rate from annealing temperature, which simulated the diffusion bonding process, on the microstructure of Haynes 230 (Ni-22Cr-14W-5Co) were investigated. While the grain boundaries are slightly covered with Cr-rich M 23 C 6 carbides for the diffusion-bonded and quenched condition, precipitates were extensively present on/near the grain boundaries for the furnace-cooled specimens. For the furnace-cooled specimens, lamellar precipitates were extensively formed near the grain boundaries below 1 000 deg. C, with intervals of a few hundred nanometers. Also, grain boundaries were severely serrated for the furnace-cooled specimens. Through electron probe micro analysis and transmission electron microscope, the lamellar precipitates were identified as (Cr,W)-rich M 23 C 6 -type lamellar carbides. Despite the differences in microstructure, tensile properties were not much affected by the cooling rate. Creep tests are underway and results will be presented. (authors)

  18. Tensile and Creep-Rupture Evaluation of a New Heat of Haynes Alloy 25

    International Nuclear Information System (INIS)

    Shingledecker, J.P.; Glanton, D.B.; Martin, R.L.; Sparks, B.L.; Swindeman, R.W.

    2007-01-01

    From 1999 to 2006, a program was undertaken within the Materials Science and Technology Division, formerly the Metals and Ceramics Division, of Oak Ridge National Laboratory to characterize the tensile and creep-rupture properties of a newly produced heat of Haynes alloy 25 (L-605). Tensile properties from room temperature to 1100 C were evaluated for base material and welded joints aged up to 12,000 hours at 675 C. Creep and creep-rupture tests were conducted on base metal and cross-weldments from 650 to 950 C. Pressurized tubular creep tests were conducted to evaluate multiaxial creep-rupture response of the material. Over 800,000 hours of creep test data were generated during the test program with the longest rupture tests extending beyond 38,000 hours, and the longest creep-rate experiments exceeding 40,000 hours

  19. Resource allocation in Copaifera langsdorffii (Fabaceae): how supra-annual fruiting affects plant traits and herbivory?

    Science.gov (United States)

    da Costa, Fernanda Vieira; de Queiroz, Antônio César Medeiros; Maia, Maria Luiza Bicalho; Júnior, Ronaldo Reis; Fagundes, Marcilio

    2016-06-01

    Plants have limited resources to invest in reproduction, vegetative growth and defense against herbivorous. Trade-off in resources allocation promotes changes in plant traits that may affect higher trophic levels. In this study, we evaluated the trade-off effect between years of high and low fruiting on the investment of resources for growth and defense, and their indirect effects on herbivory in Copaifera langsdorffii. Our questions were: (i) does the resource investment on reproduction causes a depletion in vegetative growth as predicted by the Carbon/Nutrient Balance hypothesis (CNBH), resulting in more availability of resources to be allocated for defense?, (ii) does the variation in resource allocation for growth and defense between years of high and low fruiting leads to indirect changes in herbivory? Thirty-five trees located in a Cerrado area were monitored during 2008 (year of high fruiting) and 2009 (year of no fruiting) to evaluate the differential investment in vegetative traits (biomass, growth and number of ramifications), plant defense (tannin concentration and plant hypersensitivity) and herbivory (galling attack and folivory). According to our first question, we observed that in the fruiting year, woody biomass negatively affected tannin concentration, indicating that fruit production restricted the resources that could be invested both in growth as in defense. In the same way, we observed an inter-annual variation in herbivorous attack, and found that plants with higher leaf biomass and tannin concentration, experienced higher galling attack and hypersensitive reaction, regardless years. These findings suggested that plants’ resistance to herbivory is a good proxy of plant defense and an effective defense strategy for C. langsdorffii, besides the evidence of indirect responses of the third trophic level, as postulated by the second question. In summary, the supra-annual fruiting pattern promoted several changes on plant development

  20. Óleo de copaíba (Copaifera sp.: histórico, extração, aplicações industriais e propriedades medicinais Copaiba oil (Copaifera sp.: history, extraction, industrial applications and medicinal properties

    Directory of Open Access Journals (Sweden)

    F.A. Pieri

    2009-01-01

    Full Text Available Este trabalho teve como objetivo realizar uma revisão de literatura sobre o gênero Copaifera sp. Foi realizado levantamento bibliográfico do período de 1792 a 2008 utilizando bibliotecas da Universidade de São Paulo, Universidade Federal de Viçosa, Universidade Federal de Alfenas e Universidade José do Rosário Vellano, pesquisas às bases de dados SCOPUS e PubMed, além de ferramentas de busca na web. Utilizou-se para a busca palavras chave como "Copaiba", "Copaifera", "Copaíba oil" "Óleo de Copaíba". Como resultado desta pesquisa obteve-se a seleção de 63 referências incluindo livros, artigos, cadernos técnicos, resumos de congressos, teses, dissertações e patentes. Estes dados apontaram o óleo de copaíba como um exsudato produzido pelas copaibeiras como defesa contra seus predadores, que vem sendo utilizado pela medicina tradicional popular e silvícola há mais de 500 anos. Ele é extraído destas árvores através de perfurações realizadas em seus troncos. Além das inúmeras aplicações do óleo em cosméticos e outras indústrias, ainda há uma série de indicações para seu uso na medicina. Existem hoje descritas algumas dezenas de propriedades medicinais diferentes, que vem sendo em alguns casos comprovadas cientificamente, como atividade antimicrobiana, antiinflamatória, anti-neoplásica entre outras. Estudos recentes têm demonstrado também grande potencial de uso do óleo de copaíba na odontologia, na composição de cimentos endodônticos e na prevenção e combate da doença periodontal. As informações contidas neste trabalho demonstram uma grande variabilidade de aplicações do óleo de copaíba. Entretanto uma quantidade limitada de pesquisas sobre suas propriedades medicinais tem sido realizada, apresentando assim a necessidade de novas pesquisas sobre estas.The aim of this study was to conduct a literature review concerning the genus Copaifera sp. The survey involved the period from 1792 to 2008 and

  1. Obtenção de nova fonte de peroxidase de folha de Copaifera langsdorffii Desf. com alta atividade Obtention of a new source of peroxidase from Copaifera langsdorffii leaf, Desf. with high activity

    Directory of Open Access Journals (Sweden)

    Hermelinda Penha Freire Maciel

    2006-12-01

    Full Text Available Objetivou-se neste trabalho extrair peroxidase de folha de Copaifera langsdorffii (COP, medir sua atividade, compará-la com a peroxidase de raiz forte (Horseradish peroxidase - HRP e determinar o pH ótimo, a melhor solução extratora e o efeito de aditivos sobre a atividade da COP. Os resultados mostraram que a COP atingiu 81,6% da atividade de HRP e a faixa de pH ótimo foi de 5,5 a 6,0. A melhor solução extratora da enzima foi o tampão fosfato de sódio 50 mM, pH 6,0 e o melhor aditivo foi o PVPP. Concluindo, a COP apresenta atividade mais alta que outras peroxidases de diferentes fontes citadas na literatura.The purpose of this work was to extract peroxidase from Copaifera langsdorffii leaves (COP, measure its activity, compare it to that of Horseradish peroxidase and determine the optimum pH, the best extraction solution and the effect of additives on the COP activity. The results showed that COP has 81.6% of the activity of HRP and an optimum pH range between 5.5-6.0. The best extraction solution was a sodium phosphate buffer 50 mM, pH 6.0 and the best additive was PVPP. In conclusion, COP presents higher activity than peroxidases from different sources reported in the literature.

  2. Experimental and modeling results of creep fatigue life of Inconel 617 and Haynes 230 at 850 C

    International Nuclear Information System (INIS)

    Chen, Xiang; Sokolov, Mikhail A.; Sham, Sam; Erdman, Donald L. III; Busby, Jeremy T.; Mo, Kun; Stubbins, James

    2013-01-01

    Creep fatigue testing of Ni-based superalloy Inconel 617 and Haynes 230 were conducted in the air at 850 C. Tests were performed with fully reversed axial strain control at a total strain range of 0.5%, 1.0% or 1.5% and hold time at maximum tensile strain for 3, 10 or 30 min. In addition, two creep fatigue life prediction methods, i.e. linear damage summation and frequency-modified tensile hysteresis energy modeling, were evaluated and compared with experimental results. Under all creep fatigue tests, Haynes 230 performed better than Inconel 617. Compared to the low cycle fatigue life, the cycles to failure for both materials decreased under creep fatigue test conditions. Longer hold time at maximum tensile strain would cause a further reduction in both material creep fatigue life. The linear damage summation could predict the creep fatigue life of Inconel 617 for limited test conditions, but considerably underestimated the creep fatigue life of Haynes 230. In contrast, frequency-modified tensile hysteresis energy modeling showed promising creep fatigue life prediction results for both materials.

  3. Low-cycle fatigue deformation characteristics of Haynes {reg{underscore}sign} HR-120{reg{underscore}sign} alloy

    Energy Technology Data Exchange (ETDEWEB)

    Liaw, P.K.; He, Y.H.; Miller, L.; Huang, M.; Brooks, C.R.; Seeley, R.R.; Klarstrom, D.L.

    1999-07-01

    Low-cycle fatigue deformation characteristics of HAYNES HR-120 alloy at room and high temperatures were studied under axial strain control. Test results show that there is a significant effect of test temperature on the low-cycle fatigue behavior of HAYNES HR-120 alloy. It was found that the alloy could cyclically harden at moderately high temperatures (649 C and 871 C), but generally cyclically soften at room temperature (24 C) and high temperature (982 C). However, the variation of the stress amplitude with cycles at the temperatures of 24 C and 982 C depended on the total strain range. The significant cyclic hardening of the alloy occurred at the high total strain ranges of 1.5% and 2.0% during the beginning state of the test at both 24C and 982 C. Microstructural analyses indicated that the cyclic hardening behavior of the alloy at the test temperature of 649 C could be related to the formation of a number of deformation bands. Nevertheless, increasing the test temperature to 871 C, cyclic hardening was attributed to the precipitation of secondary-phase particles. Furthermore, it was also found that the coarsening of secondary-phase particles brought about cyclic softening of the alloy at the high temperature of 982 C. Coffin-Manson equations and Holloman equations were given for HAYNES HR-120 alloy at different temperatures.

  4. A validated HPLC-UV method for the analysis of galloylquinic acid derivatives and flavonoids in Copaifera langsdorffii leaves.

    Science.gov (United States)

    Motta, Erick Vicente da Silva; da Costa, Juliana de Carvalho; Bastos, Jairo Kenupp

    2017-09-01

    Copaifera langsdorffii Desf. (Fabaceae, Caesalpinioideae), popularly known as "copaiba" or "pau d'óleo", is a species of tree that is found throughout Brazil. The leaves of this tree are used in folk medicine to treat kidney stones. Galloylquinic acid derivatives and flavonoids are the main secondary metabolites found in C. langsdorffii leaves and are likely to be responsible for the effectiveness of this treatment. As an attempt to produce a phytotherapic, we have developed a reliable HPLC-UV method for the quality control of C. langsdorffii leaves. Phenolic compounds were extracted from C. langsdorffii leaves using 70% aqueous ethanol as the extraction solvent. HPLC-UV analyses were carried out on a Synergi Polar-RP column (100×3.0mm, 2.5μm), and the mobile phase was made up of formic acid-water (0.1:99.9, solvent A), and isopropanol-methanol-acetonitrile (5:40:60, solvent B). The elution gradient was A:B (90:10 to 85:15) in 8.0min, followed by A:B (85:15 to 64:36) up to 30.0min, using a flow rate of 0.7mL/min, and UV detection at 280nm. This method was used to quantify nine galloylquinic acid derivatives and two flavonoids, which gave a good detection response and linearity in the range of 1.88-110.0μg/mL. Furthermore, the detection and quantification limits ranged from 0.070 to 0.752μg/mL, and 0.211-2.278μg/mL respectively, with a maximum RSD of 4.18%. The method is reliable for the quality control of C. langsdorffii raw material, its hydroethanolic extract, and could potentially be used to quantify these compounds in other Copaifera species. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. Acaricidal activity of ethanolic extracts of Stryphnodendron adstringens and Lafoensia pacari and oil resins from Copaifera sp. and Pterodon emarginatus against Sarcoptes scabiei var. suis

    Directory of Open Access Journals (Sweden)

    Adriana Marques Faria

    Full Text Available ABSTRACT: In vitro bioassay using Sarcoptes scabiei as a test microorganism is a viable method of study for diverse drugs with acaricidal properties. A great amount of assays proves the diverse and efficient biological activity of extracts and compounds from Brazilian savanna plants. This study had as main object, test and compare the acaricidal activity of four Brazilian Cerrado bioproducts: Stryphnodendron adstringens Mart., Copaifera sp., Lafoensia pacari A. St Hil. and Pterodon emarginatus Vogel, 1837. To perform this test S. scabiei mites were collected from crusts removed on ears of highly infected sows. The mites were selected and separated in Petri dishes with three different concentrations (25, 50 and 75% of each bioproduct, to evaluate their potential acaricidal activity. The mortality of the mites was counted in each Petri dish every hour, during five hours. The statistical analyses demonstrated differences between the bioproducts tested. The oleoresin of Copaifera sp. and P. emarginatus presented the best results with 100% of mites mortality after treatment. The ethanolic extracts of S. adstringens and L. pacari demonstrated lower acaricidal activity when compared to the oleoresins, with little or no difference among the control groups tested. This bioassay demonstrated to be efficient, reliable, low cost and easy accomplishment. Oil resins from Copaifera sp. and P. emarginatus have in vitro acaricidal activity against adult females of S. scabiei var. suis.

  6. In vitro studies of the antibacterial activity of Copaifera spp. oleoresins, sodium hypochlorite, and peracetic acid against clinical and environmental isolates recovered from a hemodialysis unit

    Directory of Open Access Journals (Sweden)

    Rosimara Gonçalves Leite Vieira

    2018-01-01

    Full Text Available Abstract Background Patients submitted to hemodialysis therapy are more susceptible to infection, especially to infection by Gram-positive bacteria. Various research works have attempted to discover new antimicrobial agents from plant extracts and other natural products. Methods The present study aimed to assess the antibacterial activities of Copaifera duckei, C. reticulata, and C. oblongifolia oleoresins; sodium hypochlorite; and peracetic acid against clinical and environmental isolates recovered from a Hemodialysis Unit. The Minimum Inhibitory Concentration and the Fractionated Inhibitory Concentration Index were determined; the ability of the tested compounds/extracts to inhibit biofilm formation was evaluated by calculating the MICB50 and IC50. Results C. duckei was the most efficient among the assayed Copaifera species, and its oleoresin was more effective than peracetic acid and sodium hypochlorite. Copaifera oleoresins and disinfectants did not act synergistically at any of the tested combinations. Certain of C. duckei oleoresin, peracetic acid, and sodium hypochlorite concentrations inhibited biofilm formation and eradicated 50% of the biofilm population. Conclusion C. duckei oleoresin is a potential candidate for disinfectant formulations. Based on these results and given the high incidence of multi-resistant bacteria in hemodialysis patients, it is imperative that new potential antibacterial agents like C. duckei oleoresin, which is active against Staphylococcus, be included in disinfectant formulations.

  7. In vitro studies of the antibacterial activity of Copaifera spp. oleoresins, sodium hypochlorite, and peracetic acid against clinical and environmental isolates recovered from a hemodialysis unit.

    Science.gov (United States)

    Vieira, Rosimara Gonçalves Leite; Moraes, Thaís da Silva; Silva, Larissa de Oliveira; Bianchi, Thamires Chiquini; Veneziani, Rodrigo Cassio Sola; Ambrósio, Sérgio Ricardo; Bastos, Jairo Kenupp; Pires, Regina Helena; Martins, Carlos Henrique Gomes

    2018-01-01

    Patients submitted to hemodialysis therapy are more susceptible to infection, especially to infection by Gram-positive bacteria. Various research works have attempted to discover new antimicrobial agents from plant extracts and other natural products. The present study aimed to assess the antibacterial activities of Copaifera duckei , C. reticulata , and C. oblongifolia oleoresins; sodium hypochlorite; and peracetic acid against clinical and environmental isolates recovered from a Hemodialysis Unit. The Minimum Inhibitory Concentration and the Fractionated Inhibitory Concentration Index were determined; the ability of the tested compounds/extracts to inhibit biofilm formation was evaluated by calculating the MICB 50 and IC 50 . C. duckei was the most efficient among the assayed Copaifera species, and its oleoresin was more effective than peracetic acid and sodium hypochlorite. Copaifera oleoresins and disinfectants did not act synergistically at any of the tested combinations. Certain of C. duckei oleoresin, peracetic acid, and sodium hypochlorite concentrations inhibited biofilm formation and eradicated 50% of the biofilm population. C. duckei oleoresin is a potential candidate for disinfectant formulations. Based on these results and given the high incidence of multi-resistant bacteria in hemodialysis patients, it is imperative that new potential antibacterial agents like C. duckei oleoresin, which is active against Staphylococcus , be included in disinfectant formulations.

  8. Weldability of the superalloys Haynes 188 and Hastelloy X by Nd:YAG

    Directory of Open Access Journals (Sweden)

    Graneix Jérémie

    2014-01-01

    Full Text Available The requirements for welded aircraft parts have become increasingly severe, especially in terms of the reproducibility of the geometry and metallurgical grade of the weld bead. Laser welding is a viable method of assembly to meet these new demands, because of automation, to replace the manual TIG welding process. The purpose of this study is to determine the weldability of Hastelloy X and Haynes 188 alloys by the butt welding process with a Nd:YAG laser. To identify the influential parameters of the welding process (laser power, feed rate, focal diameter and flow of gas while streamlining testing, an experimental design was established with the CORICO software using the graphic correlation method. The position of the focal point was fixed at 1/3 of the thickness of the sheet. The gas flow rate and the power of the beam have a major effect on the mechanical properties and geometry of the weld. The strength of the weld is comparable to that of the base metal. However, there is a significant decrease in the elongation at break of approximately 30%. The first observations of the cross section of the weld by scanning electron microscopy coupled with EBSD analysis show a molten zone presenting dendritic large grains compared to the equiaxed grains of the base metals without a heat affected zone.

  9. Microstructural analysis of laser weld fusion zone in Haynes 282 superalloy

    Energy Technology Data Exchange (ETDEWEB)

    Osoba, L.O. [Department of Mechanical and Manufacturing Engineering, University of Manitoba, Winnipeg, Manitoba, R3T 5V6 (Canada); Ding, R.G. [Department of Metallurgy and Materials Engineering, University of Birmingham, Birmingham B15 2TT (United Kingdom); Ojo, O.A., E-mail: ojo@cc.umanitoba.ca [Department of Mechanical and Manufacturing Engineering, University of Manitoba, Winnipeg, Manitoba, R3T 5V6 (Canada)

    2012-03-15

    Analytical electron microscopy and spectroscopy analyses of the fusion zone (FZ) microstructure in autogenous laser beam welded Haynes 282 (HY 282) superalloy were performed. The micro-segregation patterns observed in the FZ indicate that Co, Cr and Al exhibited a nearly uniform distribution between the dendrite core and interdendritic regions while Ti and Mo were rejected into the interdendritic liquid during the weld solidification. Transmission electron diffraction analysis and energy dispersive X-ray microanalysis revealed the second phase particles formed along the FZ interdendritic region to be Ti-Mo rich MC-type carbide particles. Weld FZ solidification cracking, which is sometimes associated with the formation of {gamma}-{gamma}' eutectic in {gamma}' precipitation strengthened nickel-base superalloys, was not observed in the HY 282 superalloy. Modified primary solidification path due to carbon addition in the newly developed superalloy is used to explain preclusion of weld FZ solidification cracking in the material. - Highlights: Black-Right-Pointing-Pointer A newly developed superalloy was welded by CO{sub 2} laser beam joining technique. Black-Right-Pointing-Pointer Electron microscopy characterization of the weld microstructure was performed. Black-Right-Pointing-Pointer Identified interdendritic microconstituents consist of MC-type carbides. Black-Right-Pointing-Pointer Modification of primary solidification path is used to explain cracking resistance.

  10. Chemical composition and nutritional evaluation of the seeds of Acacia tortilis (Forssk.) Hayne ssp. raddiana.

    Science.gov (United States)

    Embaby, Hassan E; Rayan, Ahmed M

    2016-06-01

    Chemical composition and nutritional evaluation as well as physicochemical and functional properties of seed flour of Acacia tortilis (Forssk.) Hayne ssp. raddiana were studied. The results indicated that seeds contained 5.30% moisture, 3.99% ash, 9.19% fat, 14.31% fiber, 27.21% protein and 45.30% carbohydrates. Potassium was the predominant element followed by calcium and then phosphorous. Phytic acid, tannins and trypsin inhibitor as antinutrients were detected. The amino acid profile compared well with FAO/WHO recommended pattern except for cystine/methionine, isoleucine, tyrosine/phenylalanine, lysine and threonine. Also, the first limiting amino acid was lysine. Fatty acid composition showed that linoleic acid was the major fatty acid, followed by palmitic, stearic, oleic and arachidic acids. The seed oil showed absorbance in the ultraviolet ranges, thus it can be used as a broad spectrum UV protectant. For physicochemical and functional properties, acacia seeds flour had excellent water holding index, swelling index, foaming capacity and foam stability. Copyright © 2016 Elsevier Ltd. All rights reserved.

  11. Phase I decontamination of the J.C. Haynes site, Newark, Ohio. Final report

    International Nuclear Information System (INIS)

    Emswiler, T.R.

    1985-11-01

    Phase I consisted of the primary decontamination, packaging, and shipment of all 241 Am-contaminated gloveboxes, vent system, and miscellaneous waste items located in the laboratory restricted area in the J.C. Haynes house. The primary goals of Phase I were to locate and account for a major quantity of 241 Am which was unaccounted for and to remove all radioactive materials and contamination posing an imminent hazard to public health and safety. All Phase I operations were conducted under a Quality Assurance (QA) Program Plan and QA procedures written specifically for this program. In addition, certain generic Battelle QA procedures were used for routine tasks. All operations were conducted under strict health physics supervision and procedures. Cognizant ORAU and US Nuclear Regulatory Commission (NRC) personnel were on site during the entire Phase I operation and provided support and approval in the daily operations. All staff members had participated in previous decontamination and decommissioning programs involving transuranic waste and completed Phase I in a well controlled, timely, and safe manner

  12. Microstructural analysis of laser weld fusion zone in Haynes 282 superalloy

    International Nuclear Information System (INIS)

    Osoba, L.O.; Ding, R.G.; Ojo, O.A.

    2012-01-01

    Analytical electron microscopy and spectroscopy analyses of the fusion zone (FZ) microstructure in autogenous laser beam welded Haynes 282 (HY 282) superalloy were performed. The micro-segregation patterns observed in the FZ indicate that Co, Cr and Al exhibited a nearly uniform distribution between the dendrite core and interdendritic regions while Ti and Mo were rejected into the interdendritic liquid during the weld solidification. Transmission electron diffraction analysis and energy dispersive X-ray microanalysis revealed the second phase particles formed along the FZ interdendritic region to be Ti–Mo rich MC-type carbide particles. Weld FZ solidification cracking, which is sometimes associated with the formation of γ–γ' eutectic in γ' precipitation strengthened nickel-base superalloys, was not observed in the HY 282 superalloy. Modified primary solidification path due to carbon addition in the newly developed superalloy is used to explain preclusion of weld FZ solidification cracking in the material. - Highlights: ► A newly developed superalloy was welded by CO 2 laser beam joining technique. ► Electron microscopy characterization of the weld microstructure was performed. ► Identified interdendritic microconstituents consist of MC-type carbides. ► Modification of primary solidification path is used to explain cracking resistance.

  13. Biaxial thermal creep of Inconel 617 and Haynes 230 at 850 and 950 °C

    International Nuclear Information System (INIS)

    Tung, Hsiao-Ming; Mo, Kun; Stubbins, James F.

    2014-01-01

    The biaxial thermal creep behavior of Inconel 617 and Haynes 230 at 850 and 950 °C was investigated. Biaxial stresses were generated using the pressurized tube technique. The detailed creep deformation and fracture mechanism have been studied. Creep curves for both alloys showed that tertiary creep accounts for a greater portion of the materials’ life, while secondary creep only accounts for a small portion. Fractographic examinations of the two alloys indicated that nucleation, growth, and coalescence of creep voids are the dominant micro-mechanisms for creep fracture. At 850 °C, alloy 230 has better creep resistance than alloy 617. When subjected to the biaxial stress state, the creep rupture life of the two alloys was considerably reduced when compared to the results obtained by uniaxial tensile creep tests. The Monkman–Grant relation proves to be a promising method for estimating the long-term creep life for alloy 617, whereas alloy 230 does not follow the relation. This might be associated with the significant changes in the microstructure of alloy 230 at high temperatures

  14. Measurement and modeling of residual stress in a welded Haynes[reg] 25 cylinder

    International Nuclear Information System (INIS)

    Larsson, C.; Holden, T.M.; Bourke, M.A.M.; Stout, M.; Teague, J.; Lindgren, L.-E.

    2005-01-01

    An experimental and simulation study of residual stresses was made in the vicinity of a gas tungsten arc weld, used to join a hemispherical end cap to a cylinder. The capped cylinder is used in a satellite application and was fabricated from a Co-based Haynes[reg] 25 alloy. The cylinder was 34.7 mm in outer diameter and 3.3 mm in thickness. The experimental measurements were made by neutron diffraction and the simulation used the implicit Marc finite element code. The experimental resolution was limited to approximately 3 mm parallel to the axis of the cylinder (the weld was 6 mm in the same direction) and comparison over the same volume of the finite element prediction showed general agreement. Subject to the limited spatial resolution, the largest experimentally measured tensile residual stress was 180 MPa, located at the middle of the weld. However, the predictions suggest that there are regions in the weld where average tensile residual stresses as much as 400 MPa exist. One qualitative disparity between the model and the experiments was that the measurement included a larger degree of asymmetry on either side of the weld than predicted by the model

  15. Measurement and modeling of residual stress in a welded Haynes[reg] 25 cylinder

    Energy Technology Data Exchange (ETDEWEB)

    Larsson, C. [Div. of Eng. Mat., Department of Mech. Eng., Linkoeping University, 58183 Linkoeping (Sweden)]. E-mail: clarsson@cfl.rr.com; Holden, T.M. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Bourke, M.A.M. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Stout, M. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Teague, J. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Lindgren, L.-E. [Div. Comp. Aided Design, Lulea University of Technology and Dalarna University, 97187 Lulea (Sweden)

    2005-06-15

    An experimental and simulation study of residual stresses was made in the vicinity of a gas tungsten arc weld, used to join a hemispherical end cap to a cylinder. The capped cylinder is used in a satellite application and was fabricated from a Co-based Haynes[reg] 25 alloy. The cylinder was 34.7 mm in outer diameter and 3.3 mm in thickness. The experimental measurements were made by neutron diffraction and the simulation used the implicit Marc finite element code. The experimental resolution was limited to approximately 3 mm parallel to the axis of the cylinder (the weld was 6 mm in the same direction) and comparison over the same volume of the finite element prediction showed general agreement. Subject to the limited spatial resolution, the largest experimentally measured tensile residual stress was 180 MPa, located at the middle of the weld. However, the predictions suggest that there are regions in the weld where average tensile residual stresses as much as 400 MPa exist. One qualitative disparity between the model and the experiments was that the measurement included a larger degree of asymmetry on either side of the weld than predicted by the model.

  16. Avaliação das propriedades de painéis aglomerados produzidos com resíduos de serrarias de nove espécies de madeiras tropicais da Amazônia Evaluation of the properties of particleboard made from sawmill waste of nine tropical wood species of Amazon

    Directory of Open Access Journals (Sweden)

    Setsuo Iwakiri

    2012-03-01

    Full Text Available Esta pesquisa teve como objetivo avaliar a qualidade de painéis aglomerados produzidos com resíduos de processamento em serraria de nove espécies de madeiras tropicais da Amazônia. As espécies estudadas foram: Scleronema micranthum Ducke (Cardeiro, Ecclinusa guianensis Eyma (Caucho, Scleronema sp. (Castanha-de-paca, Copaifera multijuga Hayne (Copaíba, Ocotea sp. (Louro, Ocotea guianensis Aubl (Louro-espinho, Caryocar villosum Pers. (Piquiarana, Couratari oblongifolia Ducke & R. Knuth (Tauari e Virola surinamensis Rol. Warb (Virola. Foram produzidos painéis experimentais com densidade nominal de 0,75 g.cm-3, utilizando a resina uréia-formaldeído na proporção de 8% de sólidos - base peso seco das partículas. Os painéis foram prensados com pressão específica de 4,0 MPa, temperatura de 160 ºC e tempo de prensagem de oito minutos. As avaliações dos resultados de ensaios obtidos nesta pesquisa indicam a viabilidade técnica de utilização das nove espécies provenientes de florestas tropicais da Amazônia na produção de painéis de madeira aglomerada, com destaque para Ecclinusa guianensis Eyma (Caucho que, de uma forma geral, apresentou melhores resultados de propriedades físico-mecânicas.This research was developed to evaluate the quality of particleboards manufactured from sawmill waste of nine tropical wood species of Amazônia. The following species were studied: Scleronema micranthum Ducke (Cardeiro, Ecclinusa guianensis Eyma (Caucho, Scleronema sp. (Castanha-de-paca, Copaifera multijuga Hayne (Copaíba, Ocotea sp. (Louro, Ocotea guianensis Aubl (Louro-espinho, Caryocar villosum Pers. (Piquiarana, Couratari oblongifolia (Tauari e Virola surinamensis Rol. Warb (Virola. The experimental boards were manufactured with the nominal density of 0.75 g.cm-3, using the urea-formaldehyde resin in the proportion of 8% of solid content based on oven dried wood particles. The boards were pressed at the specific pressure of 40 kgf

  17. Insecticide effects of Ruta graveolens, Copaifera langsdorffii and Chenopodium ambrosioides against pests and natural enemies in commercial tomato plantation = Ação inseticida de Ruta graveolens, Copaifera langsdorffii e Chenopodium ambrosioides sobre pragas de tomate

    Directory of Open Access Journals (Sweden)

    Flávia Silva Barbosa

    2011-01-01

    Full Text Available The aim of this study was to evaluate the insecticide effect of watery leaf extracts of Ruta graveolens (Rutaceae, alcoholic leaf extracts of Copaifera langsdorffii (Caesalpinaceae and Chenopodium ambrosioides (Chenopodiaceae in the concentration of 5% under field conditions. The experiment design was randomized blocks with six replications. The parcels treated with plant extracts showed reduction in the population of pests when compared with the controlparcels. The extract elaborated with C. langsdorffii presented greater insecticidal effect under Bemisia tabaci (Hemiptera: Aleyrodidae and sum of pests. It was verified that after 24 hours ofspraying, the parcels treated with the extract of C. ambrosioides presented minor numbers of adults of Tuta absoluta (Lepidoptera: Gelechiidae, followed by the parcels treated with extract of R.graveolens. There were smaller numbers of parasitoid eggs of epidopterans Trichogramma sp. (Hymenoptera: Trichogrammatidae and sum of natural enemies (predators + parasitoids in the parcels that had received spraying with extracts from the plants of C. langsdorffii and C. ambrosioides, followed by R. graveolens, compared to the control. There were a smaller number of parasitoids from the family Eulophidae (Hymenoptera attacking caterpillars of T. absoluta in plants treated with R. graveolens, followed by C. langsdorffii and C. ambrosioides than in the control.O objetivo deste trabalho foi avaliar o efeito inseticida dos extratos aquosos de folhas de Ruta graveolens (Rutaceae e alcoólicos de folhas de Copaifera langsdorffii (Caesalpinaceae e de folhas de Chenopodium ambrosioides (Chenopodiaceae a 5%. O experimento foi em blocos casualizados com seis repetições. As parcelas tratadas tiveram redução na população de pragas, quando comparadas às parcelas sem nenhum tratamento. O extrato elaborado com C. langsdorffii apresentou maior efeito inseticida em Bemisia tabaci (Hemiptera: Aleyrodidae e soma das pragas

  18. Micromorphology of the floral nectary of red horse chestnut (Aesculus ×carnea Hayne

    Directory of Open Access Journals (Sweden)

    Elżbieta Weryszko-Chmielewska

    2014-04-01

    Full Text Available In Europe Aesculus ×carnea Hayne is planted in cities as an avenue tree. Compared to A. hippocastanum L., it is more drought resistant, but less resistant to low temperatures. A. ×carnea is a lower tree than A. hippocastanum and develops a smaller corolla. It produces dark green, shiny and crinkled leaves. Its flowers have different colours, from bright pink to carmine red. The nectary glands secrete nectar abundantly. Due to the long corolla tube, nectar is difficult to reach for bees. The aim of this study was to investigate the topography and micromorphology of the nectaries of A. ×carnea using scanning electron microscopy. The study shows that the nectary gland of red horse chestnut forms an incomplete ring around the base of the staminal filaments, surrounding only four stamens out of the seven that occur in the flower. Three stamens are outside the nectary. In its widest place, the nectary diameter reaches 2.7 mm. Three expanded portions of the gland can bee seen in the marginal part of the nectary, adjoining the petals. The part of the nectary adjacent to the filaments forms a convex protrusion with a wavy appearance (shape, which results from the vicinity of the filaments. Nectar is secreted through numerous stomata located beneath the convex part of the nectary. The stoma length is 21.7 μm, while the width 23.3 μm. In the material examined, most stomata had open pores. Secretion was observed in many places. The stomata were surrounded by 6-7 guard cells; this allows them to be classified as the cyclocytic type. The cells of the stomatal complex were raised above the surface of the other epidermal cells. The walls of the guard cells and of the adjacent epidermal cells were covered by a cuticle with irregular striation.

  19. Atividade alelopática de extratos brutos de três espécies de Copaifera (Leguminosae-Caesalpinioideae Allelophatic activity of crude extracts from three species of Copaifera (Leguminosae - Caesalpinioidedae

    Directory of Open Access Journals (Sweden)

    A.P.S Souza Filho

    2010-12-01

    Full Text Available Nos últimos anos, atenção especial foi dada aos compostos químicos envolvidos na interação entre plantas, especialmente quando se sabe das possibilidades do seu uso em estratégia de manejo de plantas daninhas. A Amazônia, pela sua megabiodiversidade e abundância de espécies vegetais, pode oferecer excelente oportunidade para a descoberta de inovadoras moléculas químicas com potencial de uso na atividade agrícola. Dessa forma, neste trabalho analisou-se, comparativamente, a atividade potencialmente alelopática de três espécies de Copaifera, caracterizando-se as variações na intensidade dos efeitos alelopáticos em função da espécie doadora, da fração da planta e da polaridade dos constituintes químicos. Extratos hexânico e etanólico, preparados a 1,0% a partir de folhas, galhos e cascas de Copaifera duckei, C. martii e C. reticulata, foram testados sobre a germinação de sementes e o desenvolvimento da raiz das plantas daninhas malícia (Mimosa pudica e mata-pasto (Senna obtusifolia. Observaram-se variações nas intensidades dos efeitos em função das variáveis estudadas. O extrato etanólico de folhas e o de galhos de C. martii e C. reticulata apresentaram alto potencial para inibir a germinação de sementes, sobretudo da espécie malícia. A espécie C. duckei evidenciou baixo potencial alelopático inibitório na germinação das duas espécies receptoras. Cascas, folhas e galhos de C. duckei apresentaram potencial inibitório mais expressivo sobre o desenvolvimento da raiz, com destaque para as folhas. Compostos químicos apolares e polares estão envolvidos na atividade alelopática da espécie C. duckei, com ênfase maior para os compostos apolares. Diferentemente, para C. martii e C. reticulata, compostos polares estão envolvidos, preferencialmente, na atividade inibitória evidenciada por essas espécies, notadamente aqueles localizados nas folhas e cascas. Comparativamente, a tendência observada foi de

  20. Non-Oxygenated Sesquiterpenes in the Essential Oil of Copaifera langsdorffii Desf. Increase during the Day in the Dry Season.

    Science.gov (United States)

    de Almeida, Luiz Fernando Rolim; Portella, Roberto de Oliveira; Bufalo, Jennifer; Marques, Márcia Ortiz Mayo; Facanali, Roselaine; Frei, Fernando

    2016-01-01

    The present study aimed to evaluate the effect of seasonal and diurnal events on the chemical profile of the essential oil obtained from the leaves of Copaifera langsdorffii Desf. This study was performed in a Brazilian savanna named Cerrado. We identified the best harvesting period for obtaining the highest amount of compounds used for commercial and industrial purposes. The chemical profile of the essential oils was evaluated by GC-FID and GC-MS, and the results were assessed through multivariate analyses. The data showed that the time of day and seasonal variations affect the quality of the essential oil obtained. Leaves harvested at the end of the day (5:00 pm) in the dry season resulted in richer essential oils with higher amounts of non-oxygenated sesquiterpenes. To the best of our knowledge, environmental conditions induce metabolic responses in the leaves of C. langsdorffii, which changes the patterns of sesquiterpene production. Therefore, these factors need to be considered to obtain better concentrations of bioactive compounds for pharmacological studies.

  1. Effect of the Copaifera langsdorffii Desf. Leaf Extract on the Ethylene Glycol-Induced Nephrolithiasis in Rats

    Directory of Open Access Journals (Sweden)

    Rejane Barbosa de Oliveira

    2013-01-01

    Full Text Available The potential of the Copaifera langsdorffii leaves extract to prevent stone formation was analyzed by means of an ethylene glycol (EG animal model of nephrolithiasis and an in vitro crystallization assay. Different doses of the C. langsdorffii leaves extract were administered to rats treated with EG. Urine biochemical parameters were quantified. CaOx deposits count and analysis of osteopontin expression were conducted on kidneys fixed in formalin. The in vitro assay was performed by turbidimetry. Phytochemical analyses of the extract were accomplished by HPLC-UV-DAD, and several compounds were isolated. C. langsdorffii leaf extract was able to avoid stone formation. The number of deposits was 50.30±31.29 at the higher extract dose, compared to the value of 179.5±45.96 achieved with the EG control. Significantly lower oxalate levels and OPN expression and increased citrate levels were observed after extract administration. In the in vitro assay, the extract diluted the formed crystals. Phytochemical analyses showed that the extract is rich in phenolic compounds that are capable of preventing stone formation. Thus, on the basis of our results, we suggest that the C. langsdorffii leaf extract has potential application in the prevention of kidney stone formation.

  2. Óleo de copaíba (Copaifera langsdorfii Desf. em padrões reprodutivos de camundongos e no desenvolvimento embriofetal Copaiba oil (Copaifera langsdorfii Desf. on mouse reproductive patterns and embryonic or fetal development

    Directory of Open Access Journals (Sweden)

    A.C.S. Lourenço

    2009-01-01

    Full Text Available A utilização de plantas medicinais sempre foi bem difundida, porém hoje se faz necessária uma abordagem científica para comprovar sua eficácia. Este estudo foi realizado para avaliar a possível toxicidade materna e teratogenicidade do óleo de copaíba, um óleo resina exudado do tronco de Copaifera langsdorfii, muito utilizado na medicina natural. Três doses de óleo de copaíba, administradas por gavage durante 5 dias do período gestacional de fêmeas de camundongos, foram testadas 0,3 mL Kg-1, 0,6 mL Kg-1 e 0,9 mL Kg-1 (p.c.. Em relação ao ganho de peso materno, peso dos órgãos, número de fetos vivos e implantes e viabilidade fetal, não houve diferença estatística entre os grupos. Os dados demonstram que este fitoterápico não apresenta toxicidade materna. Com relação às médias de peso e comprimento fetal dos grupos tratados, houve diferença estatística quando comparados ao controle, mas os fetos ainda se encontravam dentro do peso adequado à idade de prenhez. A prole das fêmeas tratadas não apresentou malformações ou alterações externas, viscerais e esqueléticas. Os resultados deste estudo indicam que o óleo de copaíba, nas doses administradas e período estudado, não apresentou toxicidade materna ou causou teratogenicidade na prole das fêmeas tratadas. Portanto, podemos considerar seu uso seguro durante o período gestacional.The use of medicinal plants has always been widely spread, but today a scientific approach is needed to prove their efficiency. The present study was performed to evaluate the possible maternal toxicity and teratogenicity of copaiba oil, a resin oil exudate from the trunk of Copaifera sp., extensively used in natural medicine. Three copaiba oil levels, administered through gavage for 5 days during the gestational period of female mice, were tested: 0.3 mL Kg-1, 0.6 mL Kg-1 and 0.9 mL Kg-1 (b.w.. As regards maternal weight gain, organ weight, live fetus number, implants and fetal

  3. Research on 16Mo3 (16M Steel Pipes Overlaid with Haynes Nicro625 Alloy Using MIG (131 Method / Badania Rur Ze Stali 16Mo3 (16M Napawanych Metodą MIG (131 Stopem Haynes Nicro625

    Directory of Open Access Journals (Sweden)

    Golański G.

    2015-12-01

    Full Text Available The paper presents the research on the microstructure and mechanical properties of a pipe made of 16Mo3 steel, overlaid with superalloy based on Haynes NiCro625 nickel. The overlay weld was overlaid using the MIG (131 method. The performed macro - and microscopic tests have shown the correct structure of the overlay weld without any welding unconformities. The examined overlay weld was characterized by a dendritic structure of the primary crystals accumulating towards the heat removal. It has been proved that the content of iron in the surface zone does not exceed 7%, and the steel-superalloy joint shows the highest properties in comparison with the materials joined.

  4. In vitro and in vivo antimalarial potential of oleoresin obtained from Copaifera reticulata Ducke (Fabaceae) in the Brazilian Amazon rainforest.

    Science.gov (United States)

    de Souza, Giovana A G; da Silva, Nazaré C; de Souza, Juarez; de Oliveira, Karen R M; da Fonseca, Amanda L; Baratto, Leopoldo C; de Oliveira, Elaine C P; Varotti, Fernando de Pilla; Moraes, Waldiney P

    2017-01-15

    In view of the wide variety of the flora of the Amazon region, many plants have been studied in the search for new antimalarial agents. Copaifera reticulata is a tree distributed throughout the Amazon region which contains an oleoresin rich in sesquiterpenes and diterpenes with β-caryophyllene as the major compound. The oleoresin has demonstrated antiparasitic activity against Leishmania amazonensis. Because of this previously reported activity, this oleoresin would be expected to also have antimalarial activity. In this study we evaluated the in vitro and in vivo antimalarial potential of C. reticulata oleoresin. In vitro assays were done using P. falciparum W2 and 3D7 strains and the human fibroblast cell line 26VA Wi-4. For in vivo analysis, BALB/c mice were infected with approximately 10 6 erythrocytes parasitized by P. berghei and their parasitemia levels were observed over 7 days of treatment with C. reticulata; hematological and biochemical parameters were analyzed at the end of experiment. The oleoresin of C. reticulata containing the sesquiterpenes β-caryophyllene (41.7%) and β-bisabolene (18.6%) was active against the P. falciparum W2 and 3D7 strains (IC 50  = 1.66 and 2.54 µg/ml, respectively) and showed low cytotoxicity against the 26VA Wi-4 cell line (IC 50  > 100 µg/ml). The C. reticulata oleoresin reduced the parasitemia levels of infected animals and doses of 200 and 100 mg/kg/day reached a rate of parasitemia elimination resembling that obtained with artemisinin 100 mg/kg/day. In addition, treatment with oleoresin improved the hypoglycemic, hematologic, hepatic and renal parameters of the infected animals. The oleoresin of C. reticulata has antimalarial properties and future investigations are necessary to elucidate its mechanism of action. Copyright © 2016 Elsevier GmbH. All rights reserved.

  5. Edge effects enhance selfing and seed harvesting efforts in the insect-pollinated Neotropical tree Copaifera langsdorffii (Fabaceae).

    Science.gov (United States)

    Tarazi, R; Sebbenn, A M; Kageyama, P Y; Vencovsky, R

    2013-06-01

    Edge effects may affect the mating system of tropical tree species and reduce the genetic diversity and variance effective size of collected seeds at the boundaries of forest fragments because of a reduction in the density of reproductive trees, neighbour size and changes in the behaviour of pollinators. Here, edge effects on the genetic diversity, mating system and pollen pool of the insect-pollinated Neotropical tree Copaifera langsdorffii were investigated using eight microsatellite loci. Open-pollinated seeds were collected from 17 seed trees within continuous savannah woodland (SW) and were compared with seeds from 11 seed trees at the edge of the savannah remnant. Seeds collected from the SW had significantly higher heterozygosity levels (Ho=0.780; He=0.831) than seeds from the edge (Ho=0.702; He=0.800). The multilocus outcrossing rate was significantly higher in the SW (tm=0.859) than in the edge (tm=0.759). Pollen pool differentiation was significant, however, it did not differ between the SW (=0.105) and the edge (=0.135). The variance effective size within the progenies was significantly higher in the SW (Ne=2.65) than at the edge (Ne=2.30). The number of seed trees to retain the reference variance effective size of 500 was 189 at the SW and 217 at the edge. Therefore, it is preferable that seed harvesting for conservation and environmental restoration strategies be conducted in the SW, where genetic diversity and variance effective size within progenies are higher.

  6. Genetic structure and diversity of Copaifera langsdorffii Desf. in Cerrado fragments of the São Paulo State, Brazil

    Directory of Open Access Journals (Sweden)

    Lia Maris Orth Ritter Antiqueira

    2014-08-01

    Full Text Available The loss of large areas of Cerrado (Brazilian savanna in Brazil can lead to reduced biodiversity and to the extinction of species. Therefore, the present study aimed to investigate the genetic fragility of populations of Copaifera langsdorffii Desf exposed to different anthropic conditions in fragments of Cerrado in the state of São Paulo. The study was carried out in two Experimental Stations operated by the Forest Institute (Assis and Itirapina, in one fully protected conservation unit (Pedregulho and in one private property (Brotas. Analyses were conducted using leaf samples from 353 adult specimens and eight pairs of microsatellite loci. The number of alleles per locus ranged from 13 to 15 in all populations, but the mean number of effective alleles was approximately half this value (7.2 to 9-1. Observed heterozygosity was significant and lower than the expected in all populations. Consequently, all populations deviated from Hardy-Weinberg expected frequencies. Fixation indexes were significant for all populations, with the Pedregulho population having the lowest value (0.189 and Itirapina having the highest (0.283. The analysis of spatial genetic structure detected family structures at distance classes of 20 to 65 m in the populations studied. No clones were detected in the populations. Estimates of effective population size were low, but the area occupied by each population studied was large enough for conservation, medium and long term. Recent reductions or bottlenecks were detected in all four populations. Mean Gst’ (genetic divergence indicated that most of the variation was within populations. Cluster structure analysis based on the genotypes detected K= 4 clusters with distinct allele frequencies patterns. The genetic differentiation observed among populations is consistent with the hypothesis of genetic and geographic isolation. Therefore, it is essential to adopt conservation strategies that raise the gene flow between fragments.

  7. In vitro antimicrobial activity of solution blow spun poly(lactic acid)/polyvinylpyrrolidone nanofibers loaded with Copaiba (Copaifera sp.) oil

    Energy Technology Data Exchange (ETDEWEB)

    Bonan, Roberta F. [Departamento de Engenharia de Materiais (DEMAT), Universidade Federal da Paraíba (UFPB), Cidade Universitária, 58.051-900 João Pessoa, PB (Brazil); Centro de Ciências da Saúde (CCS), Universidade Federal da Paraíba (UFPB), Cidade Universitária, 58.051-900 João Pessoa, PB (Brazil); Bonan, Paulo R.F.; Batista, André U.D.; Sampaio, Fábio C.; Albuquerque, Allan J.R. [Centro de Ciências da Saúde (CCS), Universidade Federal da Paraíba (UFPB), Cidade Universitária, 58.051-900 João Pessoa, PB (Brazil); Moraes, Maria C.B. [Embrapa Recursos Genéticos e Biotecnologia, Parque Estação Ecológica, W/5 Norte (Final) Cenargen (Laboratório de Semioquímicos) ASA NORTE, 70770900 Brasília, DF (Brazil); Mattoso, Luiz H.C. [Laboratório Nacional de Nanotecnologia para o Agronegócio (LNNA), Embrapa Instrumentação Agropecuária (CNPDIA), Rua XV de Novembro, 1452, Centro, 13.560, 970 São Carlos, SP (Brazil); Glenn, Gregory M. [United States Department of Agriculture (USDA), Western Regional Research Center (WRRC), Bioproduct Chemistry and Engineering - BCE, Albany, CA 94710 (United States); and others

    2015-03-01

    In this study poly(lactic acid) (PLA) and polyvinylpyrrolidone (PVP) micro- and nanofiber mats loaded with Copaiba (Copaifera sp.) oil were produced by solution blow spinning (SBS). The Copaiba (Copaifera sp.) oil was characterized by gas chromatography (GC). Neat PLA and four PLA/PVP blends containing 20% (wt.%) oil were spun and characterized by scanning electron microscopy (SEM) and by studying the surface contact angle, in vitro release rate, and antimicrobial activity. All compositions evaluated were able to produce continuous and smooth fibers by SBS. The addition of PVP increased fiber diameter, and decreased the surface contact angle. GC analysis demonstrated that the main component of the Copaiba oil was β-caryophyllene, a known antimicrobial agent. In vitro release tests of Copaiba oil volatiles demonstrated a higher release rate in fibers containing PVP. Fiber mats made from blends containing higher amounts of PVP had greater antimicrobial action against Staphylococcus aureus. The results confirm the potential of the fiber mats for use in controlled drug release and could lead to promising applications in the biomedical field. - Highlights: • An efficient method for production of antimicrobial nanofiber mats using solution blow spinning was reported. • Nanofiber mats containing Copaiba oil were efficient against Staphylococcus aureus. • Nanofiber composition changed morphological properties and antimicrobial action.

  8. Fatigue Crack Growth Behavior of Nickel-base Superalloy Haynes 282 at 550-750 °C

    Science.gov (United States)

    Rozman, K. A.; Kruzic, J. J.; Hawk, J. A.

    2015-08-01

    The fatigue crack growth rates for nickel-based superalloy Haynes 282 were measured at temperatures of 550, 650, and 750 °C using compact tension specimens with a load ratio of 0.1 and cyclic loading frequencies of 25 Hz and 0.25 Hz. Increasing the temperature from 550 to 750 °C caused the fatigue crack growth rates to increase from ~20 to 60% depending upon the applied stress intensity level. The effect of reducing the applied loading frequency increased the fatigue crack growth rates from ~20 to 70%, also depending upon the applied stress intensity range. The crack path was observed to be transgranular for the temperatures and frequencies used during fatigue crack growth rate testing. At 750 °C, there were some indications of limited intergranular cracking excursions at both loading frequencies; however, the extent of intergranular crack growth was limited and the cause is not understood at this time.

  9. Effects of electrical discharge surface modification of superalloy Haynes 230 with aluminum and molybdenum on oxidation behavior

    International Nuclear Information System (INIS)

    Bai, C.-Y.

    2007-01-01

    The effects of the electrical discharge alloying (EDA) process on improving the high temperature oxidation resistance of the Ni-based superalloy Haynes 230 have been investigated. The 85 at.% Al and 15 at.% Mo composite electrode provided the surface alloying materials. An Al-rich layer is produced on the surface of the EDA specimen alloyed with positive electrode polarity, whereas, many discontinuous piled layers are attached to the surface of the EDA superalloy when negative electrode polarity is selected. The oxidation resistance of the specimen alloyed with positive electrode polarity is better than that of the unalloyed superalloy, and the effective temperature of oxidation resistance of the alloyed layer can be achieved to 1100 o C. Conversely, the oxidation resistance of the other EDA specimen alloyed with negative electrode polarity is even worse than that of the unalloyed superalloy

  10. Alometria e arquitetura de Copaifera langsdorffii (Desf. Kuntze (Fabaceae em fitofisionomias neotropicais no sul de minas gerais

    Directory of Open Access Journals (Sweden)

    Malcon do Prado Costa

    2012-06-01

    Full Text Available http://dx.doi.org/10.5902/198050985729O objetivo deste trabalho foi analisar padrões alométricos e feições arquiteturais de Copaifera langsdorffii em diferentes fisionomias de uma região de tensão ecológica. As fisionomias de floresta, corredor, cerrado e cerrado rupestre foram estudadas nos municípios de Lavras e Carrancas, sul de Minas Gerais, Brasil. Foram estudadas as relações entre diâmetro do tronco, altura, área da copa, grau de deflexão e deslocamento relativo da copa, sendo analisado o grau de semelhança, entre as fisionomias, por meio de regressões e análise covariância. Foi realizada uma análise de componentes principais (PCA com variáveis biométricas coletadas e morfométricas calculadas, para caracterização de grupos mais homogêneos que evidenciem a plasticidade morfológica da espécie e suas diferentes estratégias e investimento em recursos. Como resultado das análises de regressão e covariância, encontraram-se padrões distintos, principalmente entre as fisionomias de floresta e cerrado, das fisionomias de cerrado rupestre e corredor. Um padrão de crescimento com maior investimento em altura na floresta, objetivando a garantia de espaço no dossel, e outro mais ligado ao crescimento horizontal da copa, nas fisionomias de cerrado rupestre e corredor. A PCA apresentou um gradiente de plasticidade morfológica para a espécie. A fisionomia de floresta apresentou maiores valores de altura total, largura de copa e diâmetro do tronco, e a fisionomia de cerrado rupestre mostrou valores mais elevados de grau de deflexão da copa (assimetria. O cerrado e o corredor formaram uma transição entre floresta e cerrado rupestre, no gradiente de feições morfológicas da espécie nas fisionomias.

  11. Efecto citoprotector y antisecretor del aceite de Copaifera officinalis en lesiones gástricas inducidas en ratas

    Directory of Open Access Journals (Sweden)

    Jorge Arroyo

    2009-06-01

    Full Text Available Objetivos: Demostrar el efecto gastroprotector del aceite de Copaifera officinalis usando indometacina y ligadura de píloro en ratas. Diseño: Estudio preclínico. Lugar: Facultades de Medicina, de Farmacia y Bioquímica. Universidad Nacional Mayor de San Marcos, Lima, Perú. Material biológico: Ratas y aceite de copaiba. Intervenciones: Se colectó el aceite de copaiba en Ucayali, Pucallpa. La citoproteccción fue evaluada con indometacina, considerando un grupo control normal, indometacina, grupos de aceite de copaiba y omeprazol. Las lesiones de la mucosa gástrica fueron calificadas como las compatibles con necrosis local (tejido no viable, hiperemia, enrojecimiento presente y hemorragia, empleando la escala de puntaje observacional; y la úlcera, según la escala de Macallister modificado. El ensayo de antisecreción fue realizado por el modelo de ligadura del píloro, en el que 24 ratas albinas fueron divididas al azar en 3 grupos; un control, otro de aceite de copaiba 40mg/kg y un tercero de omeprazol 10 mg/kg. Después de 4 horas de ligazón, fueron sacrificados, extrayéndose los estómagos; con mucho cuidado se midió el volumen y se determinó el pH de la secreción gástrica, por potenciometría. Se realizó evaluación histopatológica según Devi. Principales medidas de resultados: Lesiones ulcerosas. Resultados: Los resultados indicaron 100% de efecto citoprotector con el aceite de copaiba y de 97,8% para el omeprazol (p<0,0001, ratificado con los hallazgos histopatológicos; la disminución del volumen de secreción fue 79,4% para omeprazol y 42,8% para el aceite de copaiba (p<0,001, con incremento del pH. Conclusiones: En condiciones experimentales, el aceite de copaiba fue efectivo como agente gastroprotector en ratas con inducción de úlcera gástrica.

  12. Inspection report of unauthorized possession and use of unsealed americium-241 and subsequent confiscation, J.C. Haynes Company, Newark, Ohio

    International Nuclear Information System (INIS)

    1985-11-01

    This US Nuclear Regulatory Commission report documents the circumstances surrounding the March 26, 1985, confiscation and subsequent decontamination activities related to the use of unauthorized quantities of americium-241 at the John C. Haynes Company (licensee) of Newark, Ohio. It focuses on the period from early February to July 26, 1985. The incident started when NRC Region III recieved information that John C. Haynes possessed unauthorized quantities of americium-241 and was conducting unauthorized activities (diamond irradiation). By July 26, 1985, the decontamination activities at the licensee's laboratory were concluded. The licensee's actions with diamond irradiation resulted in contamination in restricted and unrestricted areas of the facility. The confiscation and decontamination activities required the combined efforts of NRC, Federal Bureau of Investigation, US Department of Energy, Oak Ridge Associated Universities, the State of Ohio, and the US Environmental Protection Agency. The report describes the factual information and significant findings associated with the confiscation and decontamination activities

  13. Corrosion behavior of Haynes {sup registered} 230 {sup registered} nickel-based super-alloys for integrated coal gasification combined cycle syngas plants. A plant exposure study

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Sungkyu; Lee, Jieun; Kang, Suk-Hwan; Lee, Seung-Jong; Yun, Yongseung [Institute for Advanced Engineering (IAE), Gyeonggi-do (Korea, Republic of). Plant Engineering Center; Kim, Min Jung [Sungkyunkwan Univ, Gyeonggi-do (Korea, Republic of). Advanced Materials Technology Research Center

    2015-07-01

    The corrosion behavior of commercially available Haynes {sup registered} 230 {sup registered} nickel-based alloy samples was investigated by exposure to coal-gasifying integrated coal gasification combined cycle pilot plant facilities affiliated with the Institute for Advanced Engineering (2.005 MPa and 160-300 C). The morphological and microstructural analyses of the exposed samples were conducted using scanning electron microscopy and energy-dispersive X-ray spectroscopy analysis on the external surface of the recovered corrosion test samples to obtain information of the corrosion scale. These analyses based on the pre- and post-exposure corrosion test samples combined with thermodynamic Ellingham-Pourbaix stability diagrams provided preliminary insight into the mechanism of the observed corrosion behavior prevailing in the piping materials that connected the particulate removal unit and water scrubber of the integrated coal gasification combined cycle pilot plant. Uniform material wastage was observed after 46 hours of operation, and a preliminary corrosion mechanism was suggested: the observed material waste and corrosion behavior of the Haynes {sup registered} 230 {sup registered} nickel-based alloy samples cut off from the coal syngas integrated coal gasification combined cycle plant were explained by the formation of discontinuous (complex) oxide phases and subsequent chlorine-induced active oxidation under the predominantly reducing environment encountered. This contribution continues the already published studies of the Fe-Ni-Cr-Co alloy Haynes {sup registered} 556 {sup registered}.

  14. Corrosion behavior of Haynes registered 230 registered nickel-based super-alloys for integrated coal gasification combined cycle syngas plants. A plant exposure study

    International Nuclear Information System (INIS)

    Lee, Sungkyu; Lee, Jieun; Kang, Suk-Hwan; Lee, Seung-Jong; Yun, Yongseung; Kim, Min Jung

    2015-01-01

    The corrosion behavior of commercially available Haynes registered 230 registered nickel-based alloy samples was investigated by exposure to coal-gasifying integrated coal gasification combined cycle pilot plant facilities affiliated with the Institute for Advanced Engineering (2.005 MPa and 160-300 C). The morphological and microstructural analyses of the exposed samples were conducted using scanning electron microscopy and energy-dispersive X-ray spectroscopy analysis on the external surface of the recovered corrosion test samples to obtain information of the corrosion scale. These analyses based on the pre- and post-exposure corrosion test samples combined with thermodynamic Ellingham-Pourbaix stability diagrams provided preliminary insight into the mechanism of the observed corrosion behavior prevailing in the piping materials that connected the particulate removal unit and water scrubber of the integrated coal gasification combined cycle pilot plant. Uniform material wastage was observed after 46 hours of operation, and a preliminary corrosion mechanism was suggested: the observed material waste and corrosion behavior of the Haynes registered 230 registered nickel-based alloy samples cut off from the coal syngas integrated coal gasification combined cycle plant were explained by the formation of discontinuous (complex) oxide phases and subsequent chlorine-induced active oxidation under the predominantly reducing environment encountered. This contribution continues the already published studies of the Fe-Ni-Cr-Co alloy Haynes registered 556 registered .

  15. Avaliação da toxicidade aguda e potencial neurotóxico do óleo-resina de copaíba (Copaifera reticulata Ducke, Fabaceae

    Directory of Open Access Journals (Sweden)

    Camile Giaretta Sachetti

    Full Text Available O óleo-resina de copaíba obtido do gênero Copaifera L., Fabaceae, é largamente utilizado na medicina popular como antiinflamatório, antimicrobiano e antitumoral. Porém, informações sobre seu potencial tóxico são escassos na literatura. O objetivo deste estudo foi estabelecer a toxicidade oral aguda e os possíveis efeitos neurotóxicos relacionados à ingestão do óleo-resina de Copaifera reticulata Ducke, Fabaceae, em ratas Wistar. O estudo foi conduzido com quinze ratas nulíparas distribuídas nos grupos de doses 300 e 2000 mg/kg pc de óleo-resina administrado por gavagem. Os resultados obtidos mostraram que nestas doses não houve sinais clínicos de toxicidade ou neurotoxicidade, alteração no consumo de ração ou alteração no peso corpóreo. A dose letal aguda foi estimada como maior que 2000 mg/kg pc e classificada como categoria 5, segundo o Guia OECD 423. Estes resultados indicam que existe uma relativa margem de segurança para o uso do óleo-resina de copaíba como agente terapêutico, embora estudos toxicológicos adicionais sejam ainda necessários, principalmente com a administração repetida de baixas doses.

  16. Fatigue Crack Growth Mechanisms for Nickel-based Superalloy Haynes 282 at 550-750 °C

    Science.gov (United States)

    Rozman, Kyle A.; Kruzic, Jamie J.; Sears, John S.; Hawk, Jeffrey A.

    2015-10-01

    The fatigue crack growth rates for nickel-based superalloy Haynes 282 were measured at 550, 650, and 750 °C using compact tension specimens with a load ratio of 0.1 and cyclic loading frequencies of 25 and 0.25 Hz. The crack path was observed to be primarily transgranular for all temperatures, and the observed effect of increasing temperature was to increase the fatigue crack growth rates. The activation energy associated with the increasing crack growth rates over these three temperatures was calculated less than 60 kJ/mol, which is significantly lower than typical creep or oxidation mechanisms; therefore, creep and oxidation cannot explain the increase in fatigue crack growth rates. Transmission electron microscopy was done on selected samples removed from the cyclic plastic zone, and a trend of decreasing dislocation density was observed with increasing temperature. Accordingly, the trend of increasing crack growth rates with increasing temperature was attributed to softening associated with thermally assisted cross slip and dislocation annihilation.

  17. Hydrogeology, hydraulic characteristics, and water-quality conditions in the surficial, Castle Hayne and Peedee aquifers of the greater New Hanover County area, North Carolina, 2012-13

    Science.gov (United States)

    McSwain, Kristen Bukowski; Gurley, Laura N.; Antolino, Dominick J.

    2014-01-01

    A major issue facing the greater New Hanover County, North Carolina, area is the increased demand for drinking water resources as a result of rapid growth. The principal sources of freshwater supply in the greater New Hanover County area are withdrawals of surface water from the Cape Fear River and groundwater from the underlying Castle Hayne and Peedee aquifers. Industrial, mining, irrigation, and aquaculture groundwater withdrawals increasingly compete with public-supply utilities for freshwater resources. Future population growth and economic expansion will require increased dependence on high-quality sources of fresh groundwater. An evaluation of the hydrogeology and water-quality conditions in the surficial, Castle Hayne, and Peedee aquifers was conducted in New Hanover, eastern Brunswick, and southern Pender Counties, North Carolina. A hydrogeologic framework was delineated by using a description of the geologic and hydrogeologic units that compose aquifers and their confining units. Current and historic water-level, water-quality, and water-isotope data were used to approximate the present boundary between freshwater and brackish water in the study area. Water-level data collected during August–September 2012 and March 2013 in the Castle Hayne aquifer show that recharge areas with the highest groundwater altitudes are located in central New Hanover County, and the lowest are located in a discharge area along the Atlantic Ocean. Between 1964 and 2012, groundwater levels in the Castle Hayne aquifer in central New Hanover County have rebounded by about 10 feet, but in the Pages Creek area groundwater levels declined in excess of 20 feet. In the Peedee aquifer, the August–September 2012 groundwater levels were affected by industrial withdrawals in north-central New Hanover County. Groundwater levels in the Peedee aquifer declined more than 20 feet between 1964 and 2012 in northeastern New Hanover County because of increased withdrawals. Vertical gradients

  18. Ontogênese, anatomia e ultra-estrutura dos nectários extraflorais de Hymenaea stigonocarpa Mart. ex Hayne (Fabaceae - Caesalpinioideae Ontogenesis, anatomy, and ultrastructure of Hymenaea stigonocarpa Mart. ex Hayne (Fabaceae - Caesalpinioideae extrafloral nectaries

    Directory of Open Access Journals (Sweden)

    Élder Antônio Sousa Paiva

    2006-06-01

    Full Text Available O jatobá-do-cerrado (Hymenaea stigonocarpa Mart. ex Hayne apresenta nectários extraflorais (NEFs, os quais são descritos pela primeira vez no gênero. Neste trabalho foram estudadas a distribuição, ontogênese, estrutura e ultra-estrutura dos nectários extraflorais (NEFs. Amostras de folhas em várias fases de desenvolvimento foram coletadas, fixadas e processadas para estudos em microscopia de luz e eletrônica de transmissão e varredura, segundo técnicas convencionais. Testes histoquímicos foram empregados para determinar a natureza química da secreção. Os NEFs estão distribuídos por todo o limbo, sendo mais concentrados nos terços basal e médio de cada folíolo. Estes nectários são embutidos no mesofilo, apresentam tecido secretor envolvido por uma endoderme e são vascularizados por xilema e floema. A atividade secretora dos NEFs é limitada à fase juvenil da folha. Nas folhas mais velhas, os NEFs tornam-se não funcionais. O tecido secretor dos NEFs é formado a partir da protoderme, enquanto a endoderme tem origem no meristema fundamental. No tecido secretor de nectários funcionais as células apresentam citoplasma denso, núcleo volumoso, mitocôndrias, plastídios com sistema de membranas pouco desenvolvido, gotas de óleo dispersas no citosol, dictiossomos e segmentos de retículo endoplasmático liso. A secreção é liberada por meio de rupturas cuticulares e apresenta polissacarídeos e lipídios.Hymenaea stigonocarpa Mart. ex Hayne, known as "jatobá-do-cerrado" has extrafloral nectaries (EFNs, which are reported for the first time in Hymenaea genus. In this research the origin, distribution, structure, and ultrastructure of the EFNs were studied. Samples of leaflets at different developmental stages were collected, fixed and processed by standard methods for analyses at light and electronic microscopes; histochemical tests were employed to determine the nature of secretion products. EFNs are distributed all over

  19. Microstructure of Haynes® 282® Superalloy after Vacuum Induction Melting and Investment Casting of Thin-Walled Components

    Directory of Open Access Journals (Sweden)

    Krzysztof J. Kurzydlowski

    2013-11-01

    Full Text Available The aim of this work was to characterize the microstructure of the as-cast Haynes® 282® alloy. Observations and analyses were carried out using techniques such as X-ray diffraction (XRD, light microscopy (LM, scanning electron microscopy (SEM, transmission electron microscopy (TEM, X-ray spectroscopy (EDS, wave length dispersive X-ray spectroscopy (WDS, auger electron spectroscopy (AES and electron energy-loss spectrometry (EELS. The phases identified in the as-cast alloy include: γ (gamma matrix, γʹ (matrix strengthening phase, (TiMoCrC (primary carbide, TiN (primary nitride, σ (sigma-TCP phase, (TiMo2SC (carbosulphide and a lamellar constituent consisting of molybdenum and chromium rich secondary carbide phase together with γ phase. Within the dendrites the γʹ appears mostly in the form of spherical, nanometric precipitates (74 nm, while coarser (113 nm cubic γʹ precipitates are present in the interdendritic areas. Volume fraction content of the γʹ precipitates in the dendrites and interdendritic areas are 9.6% and 8.5%, respectively. Primary nitrides metallic nitrides (MN, are homogeneously dispersed in the as-cast microstructure, while primary carbides metallic carbides (MC, preferentially precipitate in interdendritic areas. Such preference is also observed in the case of globular σ phase. Lamellar constituents characterized as secondary carbides/γ phases were together with (TiMo2SC phase always observed adjacent to σ phase precipitates. Crystallographic relations were established in-between the MC, σ, secondary carbides and γ/γʹ matrix.

  20. Potencial de produção de óleo-resina de copaíba (Copaifera spp de populações naturais do sudoeste da Amazônia Oil resin production potential of Copaifera spp natural populations in the Southwestern Brazilian Amazon

    Directory of Open Access Journals (Sweden)

    Onofra Cleuza Rigamonte-Azevedo

    2006-08-01

    Full Text Available O potencial de produção de óleo-resina extraído de Copaífera spp foi avaliado em duas populações naturais do sudoeste da Amazônia brasileira (municípios de Tarauacá e Xapuri, nos anos de 2000 e 2001. Foram selecionadas 388 árvores adultas de copaíbas das duas populações, sendo identificados em cada árvore o diâmetro à altura do peito (DAP, a produção de óleo-resina, a posição da árvore no relevo local (baixio ou terra firme e a tipologia florestal local (floresta aberta ou densa, além do nome regional da copaíba, com base em características morfológicas da casca: Copaifera reticulata: copaíba-branca, vermelha, amarela e preta e Copaifera paupera: mari-mari. Os resultados indicam que a copaíba mari-mari possui maior proporção de indivíduos produtivos (80%, enquanto os demais morfotipos apresentaram apenas de 22 a 40% de seus indivíduos produtivos. Com relação a todas as árvores amostradas, a produção de óleo-resina variou de 0 a 18 L árvore-1, com a copaíba mari-mari tendo a maior produção média (1,33 L árvore-1, porém sem diferir significativamente dos demais morfotipos. Após excluir da análise as árvores não produtivas, a copaíba-preta apresentou significativamente a maior produção média de óleo-resina (2,92 L árvore-1. A tipologia florestal, posição da árvore no relevo e o DAP não se mostraram relacionados a produção de óleo-resina.The potential for production of oil resin extracted from Copaifera spp natural populations was studied in two natural populations (municipalities of Tarauacá and Xapuri in the Southwestern Brazilian Amazon, in 2000 and 2001. Three hundred and eighty-eight adult trees were selected within these two populations. DBH, oil production, topographic position, regional common names (based on bark appearance; White, Red, Yellow, Black for Copaifera reticulata, and Mari-Mari for C. paupera and forest typology were recorded for each individual. Copaiba Mari

  1. Larvicidal activity of oil-resin fractions from the Brazilian medicinal plant Copaifera reticulata Ducke (Leguminosae-Caesalpinoideae against Aedes aegypti (Diptera, Culicidae Atividade larvicida das frações do óleo-resina da planta medicinal brasileira Copaifera reticulata Ducke (Leguminosae-Caesalpinoideae sobre o Aedes aegypti (Diptera, Culicidae

    Directory of Open Access Journals (Sweden)

    Heloísa Helena Garcia da Silva

    2007-06-01

    Full Text Available Oil-resin fractions from Copaifera reticulata Ducke (Leguminosae-Caesalpinoideae were evaluated for larvicidal activity on third larval instars of Aedes aegypti, in searching for alternative control methods for this mosquito. The bioactive fractions were chemically monitored by thin-layer chromatography, ¹H and 13C nuclear magnetic resonance and mass spectrometry. Bioassays were performed using five repetitions, at a temperature of 28 ± 1°C, relative humidity of 80 ± 5% and light and dark cycles of 12h. Mortality was indicated by darkening of the cephalic capsule after 24h of exposure of the larvae to the solutions. The most active fractions were CRM1-4 (sesquiterpenes and CRM5-7 (labdane diterpenes, which showed LC50 values of 0.2 and 0.8ppm, respectively.A atividade larvicida das frações do óleo-resina de Copaifera reticulata Ducke (Leguminosae-Caesalpinoideae foi avaliada em larvas de 3º estádio de Aedes aegypti, na busca de alternativas para o controle desse mosquito. As frações bioativas foram monitoradas quimicamente através de cromatografia de camada delgada, analisada por ressonância magnética nuclear de hidrogênio (¹H e 13C e espectrometria de massas. Os bioensaios foram realizados à temperatura de 28±1°C, 80±5% de umidade relativa e fotofase de 12h, com cinco repetições. A mortalidade foi determinada através do escurecimento da cápsula cefálica, após 24h de exposição das larvas às soluções. As frações mais ativas foram CRM1-4 (sesquiterpenos e CRM5-7 (diterpeno labdano, que mostraram os valores de CL50 de 0,2 e 0,8ppm, respectivamente.

  2. Effects of Aqueous Extracts of Copaifera langsdorffii (Fabaceae) on the Growth and Reproduction of Spodoptera frugiperda (J. E. Smith) (Lepidoptera: Noctuidae).

    Science.gov (United States)

    Sâmia, R R; de Oliveira, R L; Moscardini, V F; Carvalho, G A

    2016-10-01

    Spodoptera frugiperda (J. E. Smith) (Lepidoptera: Noctuidae) is considered a pest of maize crops throughout the Western Hemisphere. We report on the effects of aqueous extracts of leaves and bark of Copaifera langsdorffii (Fabaceae) on the biology of S. frugiperda, as an alternative source of natural bioactive molecules for the sustainable management of this pest. Second instars were sprayed with aqueous extracts prepared with 5% (w/v) plant material and/or fed on an artificial diet containing extracts at a concentration equivalent to 0.25% (w/v) for 17 days. Both leaf and bark extracts of C. langsdorffii significantly reduced S. frugiperda food intake, feces, and larval weight and caused a delay in larval development. Additionally, C. langsdorffii-based extracts increased the oviposition period; induced morphological changes in the eggs, including deformation of the corium and malformation of the micropylar and aeropylar regions; and reduced egg viability. But, aqueous extracts of C. langsdorffii exhibited no negative effects on larval and pupal survival, duration of the pupal stage, survival of pupae, sex ratio, longevity, duration of pre-oviposition period, and female fecundity. Aqueous extracts of leaves and bark of C. langsdorffii are promising alternatives for the control of S. frugiperda in maize crops.

  3. "I want to be a pop idol". Oscar Wilde between parody and glam re-invention in Todd Haynes' Velvet Goldmine

    Directory of Open Access Journals (Sweden)

    Pierpaolo Martino

    2017-01-01

    Full Text Available Il presente studio analizza Velvet Goldmine un film del 1998 diretto da Todd Haynes al fine di indagare come il regista americano riesca ad evidenziare la centralità del glam (emerso in Gran Bretagna nei primi anni Settanta nella cultura contemporanea, ponendo un' enfasi specifica sull’aspetto che più di ogni altro aveva caratterizzato quell’esperienza, ossia la sovversione parodica dell' idea di mascolinità normativa nei decenni precedenti. Sul palco i 'glamsters' – ossia artisti quali Bolan, Bowie, Roxy Music, Glitter – erano in grado, utilizzando segni visivi quali trucco e abiti 'glitter' di costruire un’identità di genere ibrida che si poneva in netto contrasto con il machismo di molti musicisti degli anni Sessanta. Seguendo un approccio metodologico in cui studi culturali, studi letterari e neo-musicologia finiscono per dialogare tra loro, la presente indagine crea uno stretto rapporto tra Oscar Wilde e la cultura glam – un rapporto individuato dal regista sin dalle prime battute del film – ma che qui viene declinato in un senso più specifico, in base al quale l' intero film rappresenta una parodia o reinvenzione glam dell'intera epopea wildiana e in cui le immagini e gli aforismi wildiani sembrano interrogare con la loro complessità e la loro portata dissacrante il nostro presente.  The present essay analyses Velvet Goldmine a 1998 film directed by Todd Haynes, in order to investigate how the American director points to the relevance of glam (emerged in Great Britain at the beginning of the Seventies within contemporary culture, focusing on one of its most relevant aspects, that is the parodic subversion  of the normative idea of masculinity which was dominant in the previous decades. Glamsters – that is, such artists as Bolan, Bowie, Roxy Music and Glitter – were able, using such visual signs as make-up and glitter dresses, to construct a hybrid gender identity, which sharply contrasted with the normative

  4. Effects of the Dietary Supplementation of Sucupira (Pterodon Emarginatus Vog. and Copaiba (Copaifera Langsdorffii Resinoils on Chicken Breast and Thigh Meat Quality and Oxidative Stability

    Directory of Open Access Journals (Sweden)

    CB de Lima

    2015-12-01

    Full Text Available ABSTRACT An experiment was conducted to evaluate the addition of the oil resins ofsucupira (Pterodon emarginatus Vog. and copaiba (Copaifera langsdorffii to broiler diets on chicken meat composition, quality, and lipid peroxidation. 350 one-d-old broiler chicks were submitted to seven treatments, consisting of the diets supplemented with copaiba (COP or sucupira (SUC resin oils at three different concentrations (500, 900, and 1300 ppm plus a negative control diet (CONT. At 37 days of age, 10 birds per treatment were selected according to the average weight of the experimental unit and slaughtered to collect breast and thigh meat, which was stored at 4°C for 24 hours to evaluate pH, color (L*, a*, b*, cooking weight loss (CWL, and shear force (SF. Raw meat was vacuum packed and stored frozen until lipid peroxidation analysis. Meat samples were pooled to prepare pre-cooked meatballs (30 ± 0.5g, stored under refrigeration (eight days, and analyzed every two days for TBARS concentration. Results were analyzed using the PROC GLM and MIXED procedures (SAS statistical software. Plant oils increased (p<0.05 breast meat humidity (HU and crude protein (CP levels and reduced (p<0.05 total lipid (TLC and ash (AS levels when compared with the CONT treatment. Plant oils increased (p<0.05 thigh meat HU when compared with the CONT. High COP dietary levels reduced (p<0.05 breast meat CWL, and increased (p<0.05 thigh meat L* values when compared to CONT, except for SUC500 and SUC900. The dietary inclusion of plant oil resins showed a pro-oxidant effect (p<0.01 on breast meat when compared with the CONT. Low SUC dietary supplementation levels significantly reduced (p<0.01 the concentration of secondary oxidation products in thigh meat.

  5. Study of environmental contamination in growth tree rings of Copaifera Langsdorfii by SR-TXRF: evaluation of Cr, Ni, Cu, Zn and Pb

    International Nuclear Information System (INIS)

    Faria, Bruna Fernanda; Moreira, Silvana; Vives, Ana Elisa S. de

    2009-01-01

    Some arboreal species present annual cycles of growth and sleeping, registered in the log by different anatomical structures - the growth rings. With the objective of verifying the industrial activity in the city of Bauru, SP samples were submitted to a quantitative analysis in order to verify the bio-accumulation of metals. For that Synchrotron Radiation Total Reflection X-Ray Fluorescence was used. Samples of Copaifera Langsdorfii (Copaiba) were collected close to Municipal Forest of Bauru, SP located at 200m of distance of a disabled company of energy accumulators (batteries) known by receiving several penalties of CETESB due disagreement with the environmental legislation. Through the quantification of the elements Cr, Ni, Cu, Zn and Pb in the annual growth rings were possible to verify the influence of the battery industry in the local pollution. The temporal variation of Pb showed that after the interdiction of the battery industry the concentrations are close to the reference value, but in the periods previous to the industry interdiction the Pb concentrations were above the reference value. For Cr, 46% of the samples presented superior concentration to the reference value. Zinc presented larger concentration in the period from 1996 to 1998, reaching 1383 μg g -1 . For Cu the concentrations were higher than the reference value in almost all periods analyzed, that is, from 1969 to 2004. On the other hand Ni presented great oscillation in its concentration, and the highest values were observed in the period from 1969 to 1971 and from 1999 to 2001, reaching 87 μg g -1 . (author)

  6. Interação entre Atta sexdens e espécie arbórea Copaifera langsdorfii Desf. em remanescente florestal de cerrado

    Directory of Open Access Journals (Sweden)

    Danival José de Souza

    2014-08-01

    Full Text Available A espécie arbórea Copaifera langsdorfii Desf. é muito explorada para extração do seu óleo e para utilização em recuperação de áreas degradadas e de matas ciliares. A comunidade vegetal pode ser beneficiada pela interação entre insetos e plantas sendo a mirmecocoria – dispersão de sementes por formigas – um desses exemplos de interação. O objetivo deste trabalho foi avaliar as interações entre a espécie arbórea C. langsdorffii Desf. e a espécie de formiga Atta sexdens em área de remanescente florestal de cerrado sensu stricto. As sementes forrageadas por formigas e não forrageadas encontradas no chão foram coletadas para análise de testes de germinação e IVG (índice de velocidade de germinação. A terra solta dos ninhos de Atta sexdens também foi coletada para avaliação e comparação com locais de dispersão natural. Os resultados dos testes indicaram germinação e IVG significativamente maiores em sementes forrageadas pelas formigas Atta sexdens e os locais mais favoráveis à germinação foram longe de áreas antropogênicas ao longo das trilhas de forrageamento.

  7. Study of environmental contamination in growth tree rings of Copaifera Langsdorfii by SR-TXRF: evaluation of Cr, Ni, Cu, Zn and Pb

    Energy Technology Data Exchange (ETDEWEB)

    Faria, Bruna Fernanda; Moreira, Silvana, E-mail: bffaria@yahoo.com.b [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Faculdade de Engenharia Civil, Arquitetura e Urbanismo. Dept. de Saneamento e Ambiente; Vives, Ana Elisa S. de, E-mail: aesvives@unimep.b [Universidade Metodista de Piracicaba (UNIMEP), Santa Barbara D' Oeste, SP (Brazil). Faculdade de Engenharia, Arquitetura e Urbanismo

    2009-07-01

    Some arboreal species present annual cycles of growth and sleeping, registered in the log by different anatomical structures - the growth rings. With the objective of verifying the industrial activity in the city of Bauru, SP samples were submitted to a quantitative analysis in order to verify the bio-accumulation of metals. For that Synchrotron Radiation Total Reflection X-Ray Fluorescence was used. Samples of Copaifera Langsdorfii (Copaiba) were collected close to Municipal Forest of Bauru, SP located at 200m of distance of a disabled company of energy accumulators (batteries) known by receiving several penalties of CETESB due disagreement with the environmental legislation. Through the quantification of the elements Cr, Ni, Cu, Zn and Pb in the annual growth rings were possible to verify the influence of the battery industry in the local pollution. The temporal variation of Pb showed that after the interdiction of the battery industry the concentrations are close to the reference value, but in the periods previous to the industry interdiction the Pb concentrations were above the reference value. For Cr, 46% of the samples presented superior concentration to the reference value. Zinc presented larger concentration in the period from 1996 to 1998, reaching 1383 mug g{sup -1}. For Cu the concentrations were higher than the reference value in almost all periods analyzed, that is, from 1969 to 2004. On the other hand Ni presented great oscillation in its concentration, and the highest values were observed in the period from 1969 to 1971 and from 1999 to 2001, reaching 87 mug g{sup -1}. (author)

  8. Áreas prioritárias na Amazônia para conservação dos recursos genéticos de espécies florestais nativas: fase preliminar Priority areas for genetic resources conservation of native Forest Species: preliminary phase

    Directory of Open Access Journals (Sweden)

    Angela Maria Conte Leite

    1993-07-01

    Full Text Available O CENARGEN/EMBRAPA está realizando a prospecção das áreas prioritárias para a conservação in situ dos recursos genéticos de espécies com importância sócio-econômica para cada bioma existente no Brasil, buscando a conservação da variabilidade genética das mesmas. Para a prospecção da floresta tropical úmida amazônica, inicialmente foram feitos levantamentos de herbários nacionais bem como de literatura, para tentar definir os padrões de distribuição geográfica de algumas espécies prioritárias da região. A ocorrência das mesmas foi correlacionada com solos, clima, vegetação e com a existência de unidades de conservação na Amazônia, no intuito de se propor as áreas mais adequadas para a implantação de reservas genéticas (conservação in situ e de bancos de germoplasma (conservação ex situ à campo. As espécies relatadas no presente trabalho são Aniba rosaeodora Ducke (pau-rosa, Bertholletia excelsa H.B.K. (castanha-do-Pará, Carapa quianensis Aubl. (andiroba, Cedrela fissilis Veil, e C. odorata L. (cedros, Copaifera langsdorffii Desf. e C. multijuga Hayne (copaibas, Cordia goeldiana Huber (freijó, Jacaranda copaia (Aubl. D. Dom (pará-pará, Simaruba amara Aubl. e Virola sebifera Aubl. e V. surinamensis Warb. (ucuúbas e Voucapoua americana Aubl. e V. pallidor Ducke (acapús. Trabalhos posteriores com as mesmas incluirão a corroboração à campo dos dados obtidos nos herbários e na literatura, bem como estudos a nível de população dentro das áreas selecionadas.CENARGEN/EMBRAPA is investigating priority areas for in situ conservation of genetic resources of socially and economically important species. Herbaria and the literature were consulted to determine the distribution patterns of some tropical rain forest species. Known species distribution were correlated with soils, climate, vegetation types and the existence of conservation units, in order to propose the establishment of genetic reserves for

  9. Avaliação de danos por insetos em toras estocadas em indústrias madeireiras de Manaus, Amazonas, Brasil

    Directory of Open Access Journals (Sweden)

    Abreu Raimunda Liége Souza de

    2002-01-01

    Full Text Available Em seis indústrias madeireiras de Manaus, Amazonas, foi realizado um trabalho de pesquisa, com a utilização de um questionário,para averiguar as condições de uso e processamento da madeira e as medidas preventivas contra o ataque de insetos. Foram realizados, também,um levantamento da ocorrência de insetos em 19 espécies de madeiras utilizadas por essas indústrias e a avaliação do dano provocado pelas principais espécies de Coleoptera (besouros e Isoptera (cupins. Das respostas apuradas, constatou-se que nenhuma das empresas visitadas emprega qualquer produto para prevenir o ataque de insetos às toras, assim como a secagem e a estocagem das toras são feitas de forma incorreta, contribuindo para aumentar a intensidade de ataque de insetos. Foram encontradas uma família de cupins e 16 de besouros, ressaltando que destas apenas cinco causam danos à madeira. Do total de 13 espécies de insetos coletados, destacam-se Xyleborus affinis Eichhoff e Platypus parallelus (Fabricius, encontradas em 18 espécies madeireiras, sendo conseqüentemente responsáveis pela maioria dos danos nas toras X. volvulus (Fabricius e Platypus sp. foram encontradas em cinco espécies; X. ferrugineus (Fabricius em três espécies; Minthea rugicolis Walk, Minthea sp. e Nasutitermes corniger (Motschulsky em duas, e Dinoderus bifoveolatus Wollaston, Anoplotermes sp.; e Cnesinus sp. em uma. As espécies de madeiras que sofreram maior grau de deterioração, causada principalmente por coleópteros, foram Ceiba pentandra (L. Gaertn. e Copaifera multijuga Hayne, seguidas por Couroupitaguianensis Aubl., Calophyllum brasiliense Cambess., Cedrela odorata L., Hevea brasiliensis Müll. Arg., Hura crepitans L., Hymenolobium sp., Maquira coriacea (Karsten C.C. Berg, Nectandra sp., Virolasurinamensis Warb. e Vochysia sp.

  10. POPULATION STRUCTURE AND PRODUCTION OF COPAIBA OLEORESIN BETWEEN VALLEYS AND HILLSIDES OF THE MINING AREA OFTROMBETAS RIVER - PARÁ1

    Directory of Open Access Journals (Sweden)

    Jonas Gebara

    2016-02-01

    Full Text Available ABSTRACT We aimed in this work to study natural populations of copaiba (Copaifera multijuga Hayne on the Monte Branco mountain at Porto Trombetas-PA, in order to support sustainable management and the exploitation of oleoresin from copaiba. We studied the population structure of copaiba on hillsides and valleys of the south face of Monte Branco, within Saracá Taquera National Forest, where bauxite ore was extracted in the biennium 2013-2014 by Mineração Rio do Norte (MRN. We produced a 100% forest inventory of the specie and of oleoresin extraction in order to quantify the potential production of the remaining area. The density of copaiba individuals with DBH > 30 cm was 0.33 individuals per hectare in the hillside and 0.25 individuals per hectare in the valley. Both environments presented a density of 0.28 individuals per hectare. The average copaiba oleoresin yield was 0.661±0.334 liters in the hillside and 0.765±0.280 liters in the valley. The average value of both environments together (hillside and valley was 0.714±0.218 liters. From all individuals with DBH over 30 cm, 38 (58% produced some amount of oleoresin, averaging 1.113±0.562 liters in the hillside, 1.329±0.448 liters in the valley and 1.190±0.355 liters in both environments together. The results show the need for planning the use of the surroundings of the study area in order to reach the required volume of copaiba to make feasible the sustainable management of oleoresin extraction in the region.

  11. Influência da gramatura na resistência da linha de cola aos esforços de cisalhamento em painéis compensados de Copaifera duckei Dawyer e Eperua oleifera Ducke Effects of amount of adhesive spread on the glue line shear strength in the plywood of Copaifera duckei Dawyer and Eperua oleifera Ducke

    Directory of Open Access Journals (Sweden)

    Nerci Nina Lima

    2011-03-01

    Full Text Available A madeira por ser um material de origem orgânica responde de várias maneiras aos diversos produtos nela empregados, inclusive a aplicação de cola a qual depende do seu teor de umidade, tendendo a atingir um teor de umidade em equilíbrio dinâmico com a umidade relativa da atmosfera. Atualmente utilizam-se lâminas com teores de umidade entre 5 e 15% de acordo com o tipo de resina utilizada. O presente estudo avaliou o efeito de 04 gramaturas (270; 330; 364 e 390 g/m² na produção de painéis compensados utilizando as espécies: Copaifera duckei Dawyer e Eperua oleifera Ducke. As espécies utilizadas foram retiradas da área de manejo florestal sustentável da Gethal Indústria de Madeira Compensada Ltda localizada em Manicoré-Am. As lâminas foram produzidas com espessuras de 2,2 mm. As variáveis do ciclo de prensagem foram controladas seguindo as orientações técnicas estabelecidas pelo fabricante da resina. Foi avaliada a resistência da linha de cola, com amostras da capa e do miolo em condições seca e pós-fervura. Para análise estatística foi aplicado um delineamento inteiramente casualizado com arranjo em esquema fatorial dos tratamentos. Confrontando os valores médios da tensão de ruptura e a percentagem de falha na madeira obtidos nesta pesquisa, ensaio seco e pós-fervura, com os da literatura, foi verificado que os painéis avaliados atendem aos critérios estabelecidos, podendo ser indicados para uso interior e exterior, pois de acordo com a Norma EN 314-2 (1993 o valor médio da tensão de ruptura em conjunto com a porcentagem de falha na madeira encontram-se em um padrão aceitável de comportamento.The wood as a source of organic material responds in different ways to different treatments her employees, including the application of glue which depends on its moisture content, tending to reach a moisture content in dynamic equilibrium with relative humidity of the atmosphere. Currently we use blades with moisture

  12. Efeitos clínicos e microbiológicos do óleo de copaíba (Copaifera officinalis sobre bactérias formadoras de placa dental em cães Clinical and microbiological effects of copaiba oil (Copaifera officinalis on dental plaque forming bacteria in dogs

    Directory of Open Access Journals (Sweden)

    F.A. Pieri

    2010-06-01

    Full Text Available O potencial de uso do óleo de copaíba (Copaifera officinalis na prevenção da doença periodontal, eliminando seu agente etiológico, foi avaliado em 18 cães sem raça definida, distribuídos homogeneamente em três grupos: teste, (contendo óleo de copaíba controle positivo e controle negativo. Os tratamentos ocorreram três vezes ao dia, durante oito dias. Ao nono dia, os animais receberam aplicação tópica de fucsina básica 0,5% para evidenciação do biofilme. Mudanças na halitose e gengivite foram avaliadas diariamente por inspeção visual. Adicionalmente, foram realizados testes laboratoriais de inibição de aderência de Streptococcus mutans e ensaio antimicrobiano de difusão em ágar, sobre bactérias formadoras de placa dental. Os resultados da placa evidenciada apontaram áreas de cobertura microbiana nos dentes de 53,4±8,8%, 28,5±5,4%, e 22,3±5,3% para os grupos negativo, positivo e teste, respectivamente, indicando diferença entre o controle negativo e os demais grupos (PThe copaiba oil (Copaifera officinalis potential was evaluated in preventing periodontal disease and reducing its etiology. For that 18 mongrel dogs were homogeneously distributed in three groups: test (copaiba oil, positive control (chlorexidine and negative control. The treatments were carried out three times a day, during eight days. On the 9th day, the animals were tested with a 0.5% basic solution of fuchsin for the detection of biofilm. Changes in halitosis and gingivitis were daily observed. In addition, the following laboratory tests were done: inhibition of the adherence of Streptococcus mutans, and plaque forming bacteria antimicrobial assays by the agar diffusion method. The results of the fuchsin test showed that dental plaque reached areas of 53.4±8.8%, 28.5±5.4%, and 22.3±5.3% in the negative control, positive control, and test groups, respectively, showing differences between dogs from the negative control group and dogs from the

  13. Crescimento de Hymenaea courbaril L. var. stilbocarpa (Hayne Lee et Lang. e Enterolobium contortisiliquum (Vell. Morong (Leguminosae sob diferentes níveis de sombreamento Growth of Hymenaea courbaril L. var. stilbocarpa (Hayne Lee et Lang. e Enterolobium contortisiliquum (Vell. Morong (Leguminosae under different shading levels

    Directory of Open Access Journals (Sweden)

    Ana Lúcia da Silva Lima

    2010-03-01

    Full Text Available Hymenaea courbaril L. var. stilbocarpa (Hayne Lee et Lang. é uma espécie clímax tolerante a sombra, ao passo que Enterolobium contortisiliquum (Vell. Morong. é uma espécie pioneira. O desenvolvimento destas espécies pode refletir a habilidade de adaptação aos diferentes fatores ambientais (luz, água e temperatura no local em que estão crescendo. O suprimento inadequado de um desses fatores pode reduzir o vigor da planta e limitar seu desenvolvimento. O presente trabalho teve como objetivo avaliar os efeitos do nível de sombreamento no crescimento e a concentração de pigmentos fotossintéticos em duas espécies de leguminosas arbóreas, Hymenaea courbaril L. var. stilbocarpa (Hayne Lee et Lang. e Enterolobium contortisiliquum (Vell. Morong. O experimento foi conduzido no Setor de Olericultura do Centro Universitário Luterano de Ji-Paraná (CEULJI/ULBRA/Rondônia. Durante a formação das mudas, ambas as espécies foram expostas a quatro tratamentos de sombra: 0 % (controle - sol pleno; 30 %; 50 % e 80 %. Cada tratamento foi constituído com três repetições de cada espécie; o delineamento experimental foi inteiramente casualisado. Quatro meses após a semeadura, as seguintes análises foram realizadas: número de folhas, altura da planta, comprimento do sistema radicular, massa seca total e concentração de pigmentos fotossintéticos. O tratamento sob sol pleno afetou negativamente o crescimento de ambas as espécies. As mudas crescidas sob 50% e 80% apresentaram melhor desenvolvimento. Conforme o aumento do sombreamento houve um decréscimo na razão clorofila a/b e um aumento nas concentrações de clorofila total e carotenóides totais.Hymenaea courbaril L. var. stilbocarpa (Hayne Lee et Lang. is a clímax shadow tolerant specie and Enterolobium contortisiliquum (Vell. Morong., by the other hand, is considered as a pioneer specie. The development of these species may reflect its adaptation ability to different environmental

  14. Size dependence of the polarizability and Haynes rule for an exciton bound to an ionized donor in a single spherical quantum dot

    Energy Technology Data Exchange (ETDEWEB)

    Feddi, E., E-mail: e.feddi@um5s.net.ma; Zouitine, A. [Université Mohamed V Souissi, Ecole Normale Supérieure de l' Enseignement Technique (ENSET), Rabat (Morocco); Oukerroum, A.; Zazoui, M. [Laboratory of Condensed Matter, Faculty of Sciences and Techniques, University of Hassan II-Mohammedia, B.P. 146, 20800 Mohammedia (Morocco); Dujardin, F. [LCP-A2MC, Université de Lorraine, ICPM, 1 Bd Arago, 57070 Metz (France); Assaid, E. [Laboratoire d' Électronique et Optique des Nanostructures de Semiconducteurs, Faculté des Sciences, B. P. 20, El Jadida (Morocco)

    2015-02-14

    We study the effect of an external electric field on an exciton bound to an ionized donor (D{sup +}, X) confined in a spherical quantum dot using a perturbative-variational method where the wave function and energy are developed in series of powers of the electric field strength. After testing this new approach in the determination of the band gap for some semiconductor materials, we generalize it to the case of (D{sup +}, X) in the presence of the electric field and for several materials ZnO, PbSe, and InAs, with significant values of the mass ratio. Three interesting results can be deduced: First, we show that the present method allows to determine the ground state energy in the presence of a weak electric field in a simple way (E = E{sub 0} − αf{sup 2}) using the energy without electric field E{sub 0} and the polarizability α. The second point is that our theoretical predictions show that the polarizability of (D{sup +}, X) varies proportionally to R{sup 3.5} and follows an ordering α{sub D{sup 0}}<α{sub X}<α{sub (D{sup +},X)}. The last point to highlight is that the Haynes rule remains valid even in the presence of a weak electric field.

  15. Size dependence of the polarizability and Haynes rule for an exciton bound to an ionized donor in a single spherical quantum dot

    International Nuclear Information System (INIS)

    Feddi, E.; Zouitine, A.; Oukerroum, A.; Zazoui, M.; Dujardin, F.; Assaid, E.

    2015-01-01

    We study the effect of an external electric field on an exciton bound to an ionized donor (D + , X) confined in a spherical quantum dot using a perturbative-variational method where the wave function and energy are developed in series of powers of the electric field strength. After testing this new approach in the determination of the band gap for some semiconductor materials, we generalize it to the case of (D + , X) in the presence of the electric field and for several materials ZnO, PbSe, and InAs, with significant values of the mass ratio. Three interesting results can be deduced: First, we show that the present method allows to determine the ground state energy in the presence of a weak electric field in a simple way (E = E 0  − αf 2 ) using the energy without electric field E 0 and the polarizability α. The second point is that our theoretical predictions show that the polarizability of (D + , X) varies proportionally to R 3.5 and follows an ordering α D 0 <α X <α (D + ,X) . The last point to highlight is that the Haynes rule remains valid even in the presence of a weak electric field

  16. Influência do óleo de Copaifera langsdorffii no reparo de ferida cirúrgica em presença de corpo estranho Influence of Copaifera langsdorffii oil on the repair of a surgical wound in the presence of foreign body

    Directory of Open Access Journals (Sweden)

    Rafael C. Vieira

    2008-08-01

    Full Text Available A Copaifera langsdorffii é uma leguminosa nativa do Brasil, da qual pode ser extraído um óleo, popularmente conhecido como óleo de copaíba. Este óleo é amplamente utilizado para tratamento de feridas cutâneas por ser reconhecido como antiinflamatório e cicatrizante. Apesar disso, poucas comprovações científicas do verdadeiro efeito terapêutico desta planta medicinal foram produzidas. O objetivo desse trabalho foi avaliar o efeito do tratamento tópico com C. langsdorffii no processo de reparo quando um corpo estranho é o indutor da inflamação. Para isso, 60 camundongos da linhagem BALB/c foram submetidos à incisão cirúrgica linear de 1cm no dorso para realizar o implante de uma lamínula de vidro com 12mm de diâmetro no tecido subcutâneo. Quatro tratamentos para a ferida foram estabelecidos: controle (C tratado com solução salina estéril, controle veículo (CV tratado com óleo mineral estéril, tratamento 1 (T1 tratado com diluição (v:v de óleo mineral estéril e óleo de C. langsdorffii, tratamento 2 (T2 tratado com óleo de C. langsdorffii puro. As avaliações foram realizadas em períodos de tempo pré-determinados (1, 3, 5, 7 e 14 dias. Era possível perceber características da fase proliferativa como a reepitelização, a presença de fibroblastos e a neovascularização, porém os grupos tratados com o óleo (T1 e T2 não apresentavam reepitelização aos três dias. Esses grupos aos 5 e 7 dias apresentavam no exame macroscópico maior intensidade de edema, hiperemia e permanência de crostas. Na microscopia, a reepitelização ainda não estava completa e a crosta era serocelular. Nos grupos C e CV, apesar de discreta, era predominante a presença de mononucleares, enquanto nos grupos T1 e T2 o infiltrado inflamatório era misto e com maior intensidade que nos outros grupos. Quatorze dias depois da incisão cirúrgica, os aspectos macroscópicos dos grupos C e CV eram semelhantes e os grupos T1 e T2, apesar

  17. Anatomia dos órgãos vegetativos de Hymenaea martiana Hayne (Caesalpinioideae-Fabaceae: espécie de uso medicinal em Caetité-BA Anatomy of vegetative organs of Hymenaea martiana Hayne (Fabaceae-Caesalpinioideae: a species of medicinal use in Caetité-Bahia State, Brazil

    Directory of Open Access Journals (Sweden)

    M.S. Silva

    2012-01-01

    Full Text Available Hymenaea martiana Hayne (Fabaceae-Caesalpinioideae apresenta grande valor na medicina popular em Caetité. A casca, entrecasca do caule e a resina, são utilizadas no tratamento de diversos males. Neste estudo são apresentadas a caracterização anatômica e histoquímica dos órgãos vegetativos. Amostras foram coletadas e processadas segundo técnicas usuais em anatomia vegetal e histoquímica. Todos os órgãos apresentam, em visão transversal, epiderme unisseriada e cavidades secretoras. Cutícula espessa ocorre em todos os órgãos aéreos. A raiz é tetrarca. Colênquima lacunar foi encontrado no caule. Bainha de fibras esclerenquimáticas envolve os feixes vasculares dos órgãos aéreos. Células pétreas ocorrem no pecíolo. Tricomas tectores ocorrem em ambas as faces da folha. A folha é hipoestomática com estômatos paracíticos e o mesofilo é dorsiventral. Cristais de oxalato de cálcio ocorrem no caule, pecíolo e lâmina foliar. Compostos fenólicos ocorrem na raiz, pecíolo e nervura central da folha. Grãos de amido ocorrem na raiz, caule e pecíolo. Lipídios ocorrem em todos os órgãos. Acredita-se que compostos fenólicos e cavidades secretoras de resina podem justificar a utilidade medicinal da espécie pela população de Caetité.Hymenaea martiana Hayne (Fabaceae-Caesalpinioideae shows a great value in folk medicine in Caetité. Its bark, stem-bark and resin are used to treat various ailments. In this study, the anatomical and histochemical characterization of vegetative organs is reported. Samples were collected and processed according to usual techniques of plant anatomy and histochemistry. All organs have, by cross-sectional view, uniseriate epidermis and secretory cavities. Thick cuticle occurs in all aerial organs. The root is tetrarch. Lacunar collenchyma was found in the stem. Sclerenchymatic sheath of fibers surrounds the vascular bundles of the aerial organs. Stone cells occur in the petiole. Trichomes occur

  18. Uso medicinal do óleo de copaíba (Copaifera sp. por pessoas da melhor idade no município de Presidente Médici, Rondônia, Brasil

    Directory of Open Access Journals (Sweden)

    Santina Rodrigues Santana

    2014-12-01

    Full Text Available O Brasil é o maior produtor do óleo extraído da Copaifera sp. (Caesalpiniaceae, uma das plantas medicinais mais estudadas do mundo, encontrada principalmente na região amazônica. Uma abordagem etnobotânica sobre plantas medicinais pode facilitar a seleção de espécies potencialmente ativas e utilizadas pela população de determinada região, abrindo portas para o desenvolvimento de novos medicamentos, aos quais poderão ter acesso um maior número de pessoas. Desta forma, neste trabalho foi caracterizado o uso medicinal do óleo de copaíba junto à população da melhor idade do município de Presidente Médici, Estado de Rondônia, na Amazônia brasileira, já que faltam dados quanto ao emprego dessa planta com tal finalidade nessa região. As informações etnobotânicas foram obtidas através de entrevistas semiestruturadas aplicadas a 27 pessoas, utilizando a técnica "bola de neve" para incluir participantes. As indicações etnofarmacológicas levantadas quanto ao óleo foram: tratamento de infeções (63%; cicatrizante (48%; antitetânico (18.5% e antitumoral (11%. O chá da casca do caule foi recomendado por 11% dos entrevistados para lavagem de ferimentos e como depurativo sanguíneo. Portanto, esta planta é muito usada entre pessoas da melhor idade daquele município por seu caráter medicinal, chamando a atenção para a necessidade de estudos que confirmem cientificamente sua eficácia terapêutica

  19. Alterações ultraestruturais em larvas de Aedes aegypti submetidas ao diterpeno labdano, isolado de Copaifera reticulata (Leguminosae, e à uma fração rica em taninos de Magonia pubescens (Sapindaceae

    Directory of Open Access Journals (Sweden)

    Cleyde Ferreira Barreto Valotto

    2011-04-01

    Full Text Available INTRODUÇÃO: Dengue é um importante problema de saúde pública, em vários países, e tem como principal vetor o Aedes aegypti, mosquito mais adaptado às áreas urbanizadas. Apresenta-se, pela primeira vez, as alterações ultraestruturais em larvas de 3º estádio, desse mosquito, causadas pelos larvicidas naturais, um diterpeno labdano, extraído de Copaifera reticulata, e uma fração rica em taninos catéquicos, extraída de Magonia pubescens, evidenciando o mecanismo de ação dessas substâncias. MÉTODOS: Os experimentos foram realizados com larvas de 3º estádio em solução de 0,9ppm, do diterpeno (3-β-acetoxylabdan-8(17-13-dien-15-óico e de 3,7ppm, da fração majoritária de tanino catéquico de massa molecular 864Da. Obtiveram-se as substâncias através de fracionamentos cromatográficos sucessivos, identificadas por ressonância magnética nuclear de hidrogênio e espectrometria de massas. As larvas que atingiram estado letárgico foram coletadas e dissecadas e seus tubos digestórios fixados, desidratados, emblocados e polimerizados. Cortes ultrafinos foram feitos e contrastados com acetato de uranila 3% e citrato de chumbo, posteriormente, levados ao microscópio eletrônico. RESULTADOS: As principais alterações ultraestruturais provocadas pelos diterpeno e tanino sobre larvas de Aedes aegypti foram vacuolização citoplasmática, desorganização e degeneração celular, mudança estrutural dos microvilos e deslocamento das células da lâmina basal. CONCLUSÕES: O diterpeno e a fração rica em taninos catéquicos provocaram a morte das larvas de Aedes aegypti através da destruição celular no intestino médio.

  20. Resposta de varjão (Parkia multijuga a subdoses de glyphosate Response of varjão (Parkia multijuga seedlings to reduced glyphosate rates

    Directory of Open Access Journals (Sweden)

    O.M. Yamashita

    2006-09-01

    Full Text Available O consumo de madeira no Brasil e no mundo apresenta demanda crescente. Em confronto com a pressão ambientalista de manutenção das florestas nativas, há necessidade de se estabelecerem áreas de reflorestamento para suprir o aumento da demanda de madeira, com a utilização de formas de manejo e tratos culturais que permitam o pleno crescimento das essências florestais. Um dos principais problemas do manejo de reflorestamento é a interferência das plantas daninhas após o plantio das mudas no campo, sendo o uso de herbicidas a principal forma de manejo. Este trabalho teve o objetivo de avaliar a eficiência de doses crescentes de glyphosate em mudas de varjão em condições de ambiente protegido. Foram avaliadas as doses de 0, 90, 180, 360 e 720 g ha-1 de glyphosate em plantas com quatro meses de idade, observando a intoxicação das plantas, altura, diâmetro do caule e número de folhas. O varjão, nas condições do experimento, apresentou tolerância e recuperação ao glyphosate até a dose de 360 g ha-1. Doses superiores a esta retardaram o crescimento da planta. O prejuízo causado pela deriva de glyphosate nessas plantas foi diretamente proporcional ao aumento da dose. Os sintomas evoluíram para queda de folhas, comprometendo o crescimento das plantas.Wood consumption has significantly increased in Brazil and worldwide.The environmental pressure to preserve native forest led to the need to establish reforestation areas to meet the increasing wood demand by applying cultural practices and management allowing a total growth of forest trees. One of the main problems in reforestation management is weed competition after seedling planting, with herbicide use being the main form of management. The objective of this work was to evaluate the phytotoxic effect of increasing rates of glyphosate on Varjão seedlings, under greenhouse conditions. Concentrations of 90, 180, 360 and 720 g ha-1 of glyphosate were evaluated in four-month-old plants by observing plant toxicity, plant height, stem diameter, and leaf number. A control was also used without herbicide application to compare the effects. Under the conditions of this experiment, Varjão presented tolerance to and ability to recover from glyphosate up to the rate of 360 g ha-1. Higher rates delayed plant development. The damage caused by glyphosate drift in these plants was directly proportional to rate increase. The symptoms included leaf fall, compromising plant growth.

  1. Prospeção de inibidores de serinoproteinases em folhas de leguminosas arbóreas da floresta Amazônica Prospecting serine proteinase inhibitors in leaves from leguminous trees of the Amazon forest

    Directory of Open Access Journals (Sweden)

    Larissa Ramos Chevreuil

    2011-03-01

    Full Text Available Os inibidores de proteinases são proteínas extensivamente investigadas nos tecidos de estocagem, mas pouco prospectadas em outros tecidos vegetais. O objetivo deste estudo foi detectar a presença de inibidores de serinoproteinases em extratos foliares de quinze espécies de leguminosas arbóreas da Amazônia. As espécies estudadas foram: Caesalpinia echinata, C. ferrea, Cedrelinga cateniformis, Copaifera multijuga, Dinizia excelsa, Enterolobium contortisiliquum, E. maximum, E. schomburgkii, Leucaena leucocephala, Ormosia paraensis, Parkia multijuga, P. pendula, P. platycephala, Swartzia corrugata e S. polyphylla. Folhas foram coletadas, secas a 30ºC durante 48 h, trituradas e submetidas à extração com NaCl (0,15 M, 10% p/v resultando no extrato total. Ensaios foram executados para determinar a concentração de proteínas e detectar a atividade inibitória contra a tripsina e quimotripsina bovina. Os teores de proteínas bruta e solúvel nos extratos foliares variaram de 7,9 a 31,2% e 1,3 a 14,8%, respectivamente. A atividade inibitória sobre a tripsina e quimotripsina foi observada em todos os extratos foliares. Contudo, nos extratos de E. maximum, L. leucocephala, P. pendula, S. corrugata e S. polyphylla a inibição foi maior sobre a tripsina, enquanto o extrato de P. multijuga foi mais efetivo contra a quimotripsina. Nós concluímos que nos extratos foliares de leguminosas arbóreas têm inibidores de serinoproteinases e exibem potencial aplicações biotecnológicas.The proteinase inhibitors are proteins extensively investigated in tissue storage, but few prospected in other plant tissues. The aim of this study was to detect the presence of serine proteinase inhibitors in leaf extracts from fifteen species of leguminous trees of the Amazon forest. The species studied were Caesalpinia echinata, C. ferrea, Cedrelinga cateniformis, Copaifera multijuga, Dinizia excelsa, Enterolobium contortisiliquum, E. maximum, E. schomburgkii

  2. Geodetic achievement and avoidance games for graphs | Haynes ...

    African Journals Online (AJOL)

    Let G = (V,E) be a nontrivial connected graph. For a subset S ⊆ V, the geodesic closure (S) of S is the set of all vertices on geodesics (shortest paths) between two vertices of S. We study the geodetic achievement and avoidance games defined by Buckley and Harary (Geodetic games for graphs, Quaestiones Math.

  3. Pharmacokinetic profile and oral bioavailability of Kaurenoic acid from Copaifera spp. in rats.

    Science.gov (United States)

    Matos, Dalyara Mendonça de; Viana, Milainy Rocha; Alvim, Marcela Cristina de Oliveira; Carvalho, Lara Soares Aleixo de; Leite, Laura Hora Rios; Da Silva Filho, Ademar Alves; Nascimento, Jorge Willian Leandro

    2018-05-14

    Kaurenoic acid (KA) is a kaurane diterpene found in several medicinal plants that displays biological activities, such as anti-inflammatory, smooth muscle relaxant and hypotensive response. However, there are no pharmacokinetic data available about this molecule. The purpose of the study was to determine the pharmacokinetic profile and the oral bioavailability of KA in rats. Wistar rats submitted to jugular vein cannulation received 50 mg/kg of KA by intravenous or oral route. The implanted cannula allowed intravenous administration and serial blood collection along 10 h. Analytical quantification was performed by reversed phase HPLC-UV and mobile phase composed by acetonitrile:acidified water (70:30 v/v). The validated analytical method showed precision, accuracy, robustness, reliability and linearity between 0.75 and 100 μg/mL. KA administered intravenously showed a linear and two-compartment kinetic behavior at the tested dose. The following pharmacokinetic parameters were determined: C max  = 22.17 ± 1.65 mg/L; V = 14.53 ± 1.47 L/kg; CL = 17.67 ± 1.50 mL/min/kg; AUC 0-∞  = 2859.65 ± 278.42 mg·min/L, K = 0.073 ± 0.005 h -1 and t 1/2β  = 9.52 ± 0.61 h. Oral treatment did not provide detectable plasma levels of KA, avoiding the determination of its bioavailability. Copyright © 2018 Elsevier B.V. All rights reserved.

  4. Pre-germination treatments for Hymenaea stigonocarpa Mart. ex Hayne seeds

    Directory of Open Access Journals (Sweden)

    Sérgio Roberto Garcia dos Santos

    2016-12-01

    Full Text Available Hymenaea stigonocarpa, known as Jatoba-do-cerrado, belongs to the family Fabaceae (Leguminosae and is included in the category "near threatened with extinction." It occurs in cerrado and cerradão areas, and its seeds have physical dormancy. Because of this characteristic, the aim of this study was to evaluate different pre-germination treatments and control in H. stigonocarpa seeds, namely: immersion in fire, sulfuric acid, hydrochloric acid, acetone, ether and hot water (100°C, and mechanical scarification of the seed coat by roughing with sandpaper or cutting with nail clippers and washing in running water for 2 hours. The parameters analyzed were percentage of germination, germination speed index (GSI and the percentage of hard and firm seeds and dead seeds. The final results were: a germination: boiling water and sulfuric acid were superior to the control; b GSI: boiling water, sulfuric acid, fire and sandpaper were superior to the control and c percentage of dead seeds was not statistically different between the different treatments and control. In conclusion, boiling water and sulfuric acid, were the best treatments, with regard to the parameters examined.

  5. Growth patterns and annual growth cycle of Acacia karroo Hayne in ...

    African Journals Online (AJOL)

    ... karroo; alice; botany; compensatory growth; condition; development; eastern cape; emergence; environmental conditions; field study; growth cycle; growth initiation; growth patterns; growth strategy; leaf growth; plant growth; savanna; shoot growth; soil depth; soil moisture; south africa; university of fort hare; water stress ...

  6. Short Communication Mendelian inheritance, linkage, and genotypic disequilibrium in microsatellite loci of Hymenaea stigonocarpa Mart. ex Hayne (Fabaceae-Caesalpinioideae).

    Science.gov (United States)

    Moraes, M A; Kubota, T Y K; Silva, E C B; Silva, A M; Cambuim, J; Moraes, M L T; Furlani Junior, E; Sebbenn, A M

    2016-07-29

    Hymenaea stigonocarpa is a deciduous and monoecious Neotropical tree species pollinated by bats. Due to overexploitation and habitat destruction, the population size has drastically diminished in nature. No previous study has investigated Mendelian inheritance, linkage, and genotypic disequilibrium in the available microsatellite markers in this species. So, our aim was to estimate these parameters using six microsatellite loci in a sample of 470 adults and 219 juveniles from two populations of H. stigonocarpa. In addition, 30 seeds per tree from 35 seed-trees were collected. Each seed was kept record of the seed-trees and fruit origin. Based on the six microsatellite loci, we found that only 10.6% of the cases showed significant deviations from Mendelian segregation and 15.3% showed linkage. We detected no evidence of genotypic disequilibrium between the loci in the adult trees or juveniles. Thus, our results suggest that these loci can be used with great accuracy in future genetic analyses of H. stigonocarpa populations.

  7. Preparation and physicochemical properties of protein concentrate and isolate produced from Acacia tortilis (Forssk.) Hayne ssp. raddiana.

    Science.gov (United States)

    Embaby, Hassan E; Swailam, Hesham M; Rayan, Ahmed M

    2018-02-01

    The composition and physicochemical properties of defatted acacia flour (DFAF), acacia protein concentrate (APC) and acacia protein isolate (API) were evaluated. The results indicated that API had lower, ash and fat content, than DFAF and APC. Also, significant difference in protein content was noticed among DFAF, APC and API (37.5, 63.7 and 91.8%, respectively). Acacia protein concentrate and isolates were good sources of essential amino acids except cystine and methionine. The physicochemical and functional properties of acacia protein improved with the processing of acacia into protein concentrate and protein isolate. The results of scanning electron micrographs showed that DFAF had a compact structure; protein concentrate were, flaky, and porous type, and protein isolate had intact flakes morphology.

  8. The Ambiguity of Weeping. Baroque and Mannerist Discourses in Haynes' Far from Heaven and Sirk's All That Heaven Allows

    NARCIS (Netherlands)

    Post, J.A.

    2012-01-01

    Although Douglas Sirk’ All That Heaven Allows (1954) and Todd Haynes’ Far from Heaven (2002) are both characterized as melodramas, they address their spectators differently. The divergent (emotional) reactions towards both films are the effect of different rhetorical strategies: the first can be

  9. Estudo de toxicologia clínica de um fitoterápico a base de associações de plantas, mel e própolis

    Directory of Open Access Journals (Sweden)

    Janaina P. Tavares

    Full Text Available O estudo objetivou avaliar a segurança clínica do uso de uma formulação fitoterápica composta da associação de Mikania glomerata, Mentha piperita, Eucalyptus globulus e Copaifera multijuga, incorporadas à própolis e mel para tratar doenças respiratórias. O ensaio clínico consistiu de um estudo aberto, com 26 voluntários adultos de ambos os sexos, que receberam quatro doses orais de 15 mL de Saratosse®, durante 28 dias ininterruptos. Os voluntários foram incluídos somente se considerados saudáveis, após exames clínico e complementares que antecederam o estudo. A avaliação laboratorial incluía análises hematológicas, bioquímicas e sorológicas. A mesma avaliação foi repetida após cada semana de tratamento e no pós-estudo, sete dias após a última administração. Os resultados foram submetidos à Análise de Variância (teste de Dunnett, obtendo-se, a menor diferença significante (p < 0,05. O xarope foi bem tolerado. Alguns eventos adversos foram relatados, sendo classificados como possivelmente ou não atribuídos ao fitoterápico. Os índices de hemoglobina, TGO, TGP, creatinina e leucócitos não apresentaram diferenças significativas em relação ao pré-estudo. Todos os parâmetros laboratoriais estiveram dentro das suas respectivas faixas de normalidade. Os exames clínicos, eletrocardiográficos e laboratoriais não evidenciaram sinais de toxicidade nos órgãos e sistemas avaliados.

  10. CARACTERIZAÇÃO FLORÍSTICA, FITOSSOCIOLÓGICA E REGENERAÇÃO NATURAL DO SUB-BOSQUE DA RESERVA GENÉTICA FLORESTAL TAMANDUÁ, DF

    Directory of Open Access Journals (Sweden)

    Salomão João Marcelo de Rezende

    2004-04-01

    Full Text Available O presente trabalho, desenvolvido na Reserva Genética Florestal Tamanduá, DF, teve como objetivo efetuar o levantamento fitossociológico, composição florística e distribuição espacial dos indivíduos das espécies arbóreas ocorrentes no sub-bosque da Reserva, focalizando Cariniana estrellensis (Raddi O. Kuntze, Apuleia leiocarpa (Vogel J. F.Macbr., Copaifera langsdorffii Desf., Anadenanthera macrocarpa (Benth. Brenan, Virola sebifera Aubl., Hymenaea courbaril var. stilbocarpa (Hayne Lee & Lang., Aspidosperma discolor A. St. Hil., Astronium fraxinifolium Schott e Schefflera morototoni B. Maguire, Stey. & Frodin, consideradas prioritárias para conservação in situ. Foram utilizados cinco transectos com 10 m de largura cada, alocados eqüidistantes e de comprimento variável, demarcados perpendicularmente ao curso da drenagem principal. Foram encontrados 21.482 regenerantes ha-1 em 69 espécies vegetais, 53 gêneros e 39 famílias botânicas. Em número de espécies, as famílias que mais se destacaram entre os regenerantes foram, em ordem decrescente, Leguminosae, Rubiaceae, Sapindaceae e Meliaceae. Entre os jovens, as famílias com maiores valor de importância (VI foram pela ordem Meliaceae (32,78 %, Rubiceae (13,92 %, Burseraceae (13,76 %, Rutaceae (8,54 % e Hippocrateaceae (6,36, totalizando 75,36 % de valor de importância e 78,56 % de valor de cobertura. Todas as espécies objeto deste trabalho ocorreram entre os regenerantes, destacando-se Cariniana estrellensis, porém, apenas Copaifera lagsdorffii e Virola sebifera ocorreram entre os indivíduos jovens. O quociente de mistura de 1:3 indicou tratar-se de uma mata rica em espécies, comparativamente a outros tipos florestais. A distribuição espacial dos regenerantes das espécies em questão mostrou padrões diferenciados.

  11. Antimicrobial activity of Copaifera langsdorffii oil and evaluation of its most bioactive fraction against bacteria of dog’s dental plaque

    Directory of Open Access Journals (Sweden)

    FA Pieri

    2014-04-01

    Full Text Available The aim of this study was to evaluate the inhibitory effect of copaiba oil and its resinous and volatile fractions against 20 bacterial isolates from dental plaque of dogs. The antimicrobial activities of the oil and its fractions were evaluated by the agar diffusion test with solutions at 10% concentration. The results showed antimicrobial activity for the copaiba oil solution on 16 isolates. The volatile fraction was considered statistically similar (P>0.05 to copaiba oil intact on the size of inhibition zones inhibiting 17 isolates. The resinous fraction inhibited only eight isolates, with smaller haloes when compared with those of the volatile fraction and intact oil (P<0.05. It is concluded from these results that copaiba oil is a potential phytotherapic to be used in dental plaque antimicrobial therapy of dogs and suggests that its activity is due to sesquiterpenes of the volatile fraction.

  12. The European single currency project and the concept of convergence for European welfare states – the ideal and the reality / Philip Haynes

    Index Scriptorium Estoniae

    Haynes, Philip

    2013-01-01

    Artiklis analüüsitakse, kas euroalasse kuuluvad riigid (sh Eesti) on heaolult (nt tööhõive, vaesusrisk, sotsiaalkulud per head jne.) lähenenud üksteisele ning millised on seda soodustavad tegurid

  13. Descriptions and characterizations of water-level data and groundwater flow for the Brewster Boulevard and Castle Hayne Aquifer Systems and the Tarawa Terrace Aquifer

    Science.gov (United States)

    Faye, Robert E.; Jones, L. Elliott; Suárez-Soto, René J.

    2013-01-01

    This supplement of Chapter A (Supplement 3) summarizes results of analyses of groundwater-level data and describes corresponding elements of groundwater flow such as vertical hydraulic gradients useful for groundwater-flow model calibration. Field data as well as theoretical concepts indicate that potentiometric surfaces within the study area are shown to resemble to a large degree a subdued replica of surface topography. Consequently, precipitation that infiltrates to the water table flows laterally from highland to lowland areas and eventually discharges to streams such as Northeast and Wallace Creeks and New River. Vertically downward hydraulic gradients occur in highland areas resulting in the transfer of groundwater from shallow relatively unconfined aquifers to underlying confined or semi-confined aquifers. Conversely, in the vicinity of large streams such as Wallace and Frenchs Creeks, diffuse upward leakage occurs from underlying confined or semi-confined aquifers. Point water-level data indicating water-table altitudes, water-table altitudes estimated using a regression equation, and estimates of stream levels determined from a digital elevation model (DEM) and topographic maps were used to estimate a predevelopment water-table surface in the study area. Approximate flow lines along hydraulic gradients are shown on a predevelopment potentiometric surface map and extend from highland areas where potentiometric levels are greatest toward streams such as Wallace Creek and Northeast Creek. The distribution of potentiometric levels and corresponding groundwater-flow directions conform closely to related descriptions of the conceptual model.

  14. Growth, biomass production and photosynthesis of Cenchrus ciliaris L. under Acacia tortilis (Forssk.) Hayne based silvopastoral systems in semi arid tropics.

    Science.gov (United States)

    Mishra, A K; Tiwari, H S; Bhatt, R K

    2010-11-01

    The growth, biomass production and photosynthesis of Cenchrus ciliaris was studied under the canopies of 17 yr old Acacia tortilis trees in semi arid tropical environment. On an average the full grown canopy of A. tortilis at the spacing of 4 x 4 m allowed 55% of total Photosynthetically Active Radiation (PAR) which in turn increased Relative Humidity (RH) and reduced under canopy temperature to -1.75 degrees C over the open air temperature. C. ciliaris attained higher height under the shade of A. tortilis. The tiller production and leaf area index decreased marginally under the shade of tree canopies as compared to the open grown grasses. C. ciliaris accumulated higher chlorophyll a and b under the shade of tree canopies indicating its shade adaptation potential. The assimilatory functions such as rate of photosynthesis, transpiration, stomatal conductance, photosynthetic water use efficiency (PN/TR) and carboxylation efficiency (PN/CINT) decreased under the tree canopies due to low availability of PAR. The total biomass production in term of fresh and dry weight decreased under the tree canopies. On average of 2 yr C. ciliaris had produced 12.78 t ha(-1) green and 3.72 -t ha(-1) dry biomass under the tree canopies of A. tortilis. The dry matter yield reduced to 38% under the tree canopies over the open grown grasses. The A. tortilis + C. ciliaris maintained higher soil moisture, organic carbon content and available N P K for sustainable biomass production for the longer period. The higher accumulation of crude protein, starch, sugar and nitrogen in leaves and stem of C. ciliaris indicates that this grass species also maintained its quality under A. tortilis based silvopastoral system. The photosynthesis and dry matter accumulation are closely associated with available PAR indicating that for sustainable production of this grass species in the silvopasture systems for longer period about 55% or more PAR is required.

  15. Étude du soudage LASER Yb : YAG homogène et hétérogène des superalliages Hastelloy X et Haynes 188

    OpenAIRE

    Graneix, Jérémie

    2015-01-01

    De nos jours, la complexité des pièces mécaniques est de plus en plus grande dans de nombreux secteurs industriels de pointes tels que l’aéronautique, l’aérospatiale ou bien encore le domaine médical. Pour répondre à ces nouvelles exigences, notamment en termes de géométrie, de nouvelles techniques de conception et de fabrication automatisées intègrant également une meilleure traçabilité des pièces, sont mises en place. Ce travail de thèse s’est inscrit dans un projet partenarial entre le Lab...

  16. Thermodynamic Assessment of Hot Corrosion Mechanisms of Superalloys Hastelloy N and Haynes 242 in Eutectic Mixture of Molten Salts KF and ZrF4

    Energy Technology Data Exchange (ETDEWEB)

    Michael V. Glazoff

    2012-02-01

    The KF - ZrF4 system was considered for the application as a heat exchange agent in molten salt nuclear reactors (MSRs) beginning with the work carried out at ORNL in early fifties. Based on a combination of excellent properties such as thermal conductivity, viscosity in the molten state, and other thermo-physical and rheological properties, it was selected as one of possible candidates for the nuclear reactor secondary heat exchanger loop.

  17. THE CANOPY EFFECTS OF Prosopis juliflora (DC. AND Acacia tortilis (HAYNE TREES ON HERBACEOUS PLANTS SPECIES AND SOIL PHYSICO-CHEMICAL PROPERTIES IN NJEMPS FLATS, KENYA

    Directory of Open Access Journals (Sweden)

    Henry C. Kahi

    2009-03-01

    Full Text Available The canopy effects of an exotic and indigenous tree species on soil properties and understorey herbaceous plant species were investigated on the Njemps Flats, Baringo district, Kenya. Samples of soil and herbaceous plant species were obtained within the canopies of systematically selected P. juliflora (exotic and A. tortilis (indigenous trees, and from adjacent open areas. Standing biomass, frequency and cover of understorey plant species were significantly (P

  18. Multiaxial Creep-Fatigue and Creep-Ratcheting Failures of Grade 91 and Haynes 230 Alloys Toward Addressing Design Issues of Gen IV Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Hassan, Tasnim [North Carolina State Univ., Raleigh, NC (United States); Lissenden, Cliff [Penn State Univ., University Park, PA (United States); Carroll, Laura [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-04-01

    The proposed research will develop systematic sets of uniaxial and multiaxial experimental data at a very high temperature (850-950°C) for Alloy 617. The loading histories to be prescribed in the experiments will induce creep-fatigue and creep-ratcheting failure mechanisms. These experimental responses will be scrutinized in order to quantify the influences of temperature and creep on fatigue and ratcheting failures. A unified constitutive model (UCM) will be developed and validated against these experimental responses. The improved UCM will be incorporated into the widely used finite element commercial software packages ANSYS. The modified ANSYS will be validated so that it can be used for evaluating the very high temperature ASME-NH design-by-analysis methodology for Alloy 617 and thereby addressing the ASME-NH design code issues.

  19. Multiaxial Creep-Fatigue and Creep-Ratcheting Failures of Grade 91 and Haynes 230 Alloys Toward Addressing Design Issues of Gen IV Nuclear Power Plants

    International Nuclear Information System (INIS)

    Hassan, Tasnim; Lissenden, Cliff; Carroll, Laura

    2015-01-01

    The proposed research will develop systematic sets of uniaxial and multiaxial experimental data at a very high temperature (850-950°C) for Alloy 617. The loading histories to be prescribed in the experiments will induce creep-fatigue and creep-ratcheting failure mechanisms. These experimental responses will be scrutinized in order to quantify the influences of temperature and creep on fatigue and ratcheting failures. A unified constitutive model (UCM) will be developed and validated against these experimental responses. The improved UCM will be incorporated into the widely used finite element commercial software packages ANSYS. The modified ANSYS will be validated so that it can be used for evaluating the very high temperature ASME-NH design-by-analysis methodology for Alloy 617 and thereby addressing the ASME-NH design code issues.

  20. Fungitoxic activity avaliation of the hexane and methanol extracts of copaiba plant leavesCopaifera langsdorffi Desfon Avaliação da atividade fungitóxica dos extratos foliares hexânico e metanólico da Copaifera langsdorffi Desfon

    Directory of Open Access Journals (Sweden)

    Ana Carolina Lourenço Amorim

    2004-04-01

    Full Text Available The fungitoxicity of hexane and methanol extracts of copaiba plants were evaluated by biological tests against the phytopathogens Colletotrichum gloeosporioides and Bipolaris sorokiniana. These extracts were chosen because they presented the highest yields in the extraction at room temperature. The biological material was obtained from the Department of Phytopathology of the UFLA, transplanted in BDA (C. gloeosporioides and PCA (B. sorokiniana culture media and incubated in a germination chamber with control of light and temperature. Five treatments (0/100/200/400/800 ppm were used with three repetitions of each, and four mutually perpendicular radii, were measured in centimeters from the mycelial center. The formula for the Mycelial Growth Index (MGI was applied to the values obtained for statistical analyses. A 32% reduction in the growth of B. sorokiniana was observed in the presence of the methanol extract, while the hexane extract was effective against both of the phytopathogens, resulting in a 49% reduction in the growth of B. sorokiniana and an 18% reduction in the growth of C. gloeosporioides.Avaliou-se a fungitoxicidade dos extratos hexânico e metanólico do óleo copaíba por meio de ensaios biológicos contra os fitopatógenos Colletotrichum gloeosporioides e Bipolaris sorokiniana. Os referidos extratos foram escolhidos em razão dos melhores rendimentos obtidos na extração a frio. O material biológico foi obtido na UFLA no Departamento de Fitopatologia, repicado em meio de cultura BDA (C. gloeosporioides e PCA (B. sorokiniana e incubados em câmara de germinação com controle de temperatura e luz. Empregaram-se cinco tratamentos (0/100/200/400/800 ppm, realizando-se três repetições e avaliando-se quatro raios, medidos em centímetros, a partir do micélio central. Os valores aferidos foram aplicados à fórmula do Índice de Crescimento Micelial (ICM para as análises estatísticas. Observou-se que o extrato metanólico apresentou uma tendência à redução de 32% contra o B. sorokiniana, ao passo que o hexânico foi eficaz para ambos os fitopatógenos, apresentado uma tendência à redução de 49% para o B. sorokiniana e 18% para o C. gloeosporioides.

  1. Efeito dos óleos vegetais de andiroba (Carapa sp. e Copaíba (Copaifera sp. sobre forídeo, pragas de colméias, (Diptera: Phoridae na Amazônia Central Effect of andiroba (Carapa sp. and copaiba's (Copaifera sp. vegetable oils on phorides, hives's prague (Diptera: Phoridae in Central Amazonia

    Directory of Open Access Journals (Sweden)

    Delci da Costa Brito Freire

    2006-01-01

    Full Text Available O conhecimento de substâncias repelentes para forídeos é um passo importante para a meliponicultura brasileira, pois esses insetos podem causar sérios danos às colméias de abelhas nativas. Os óleos de copaíba e andiroba, naturalmente encontrados na região amazônica, são muito utilizados pelos povos tradicionais da região como repelentes de insetos. Foi observado o efeito de dois óleos vegetais (andiroba e copaíba sobre a postura de ovos por fêmeas de forídeos em condições de laboratório. A postura das fêmeas foi realizada preferencialmente no substrato pólen e diferiu estatisticamente dos substratos contendo óleo de andiroba ou copaíba, nos quais houve considerável diminuição (até nenhuma postura, e do substrato contendo mel. Esses óleos são uma boa alternativa no controle preventivo e curativo dessa praga em colônias de Meliponineos, devido ao seu efeito repelente, ao baixo custo e disponibilidade na Região Amazônica.The knowlegment of repellants substances to phoride flies is an important step to the Brazilian stinglessbee beekeeping due to the serious damage to the native bee hives they can do. The copaiba and andiroba oils, found commonly in the Amazon region, are very employed by the traditional people as insects' repellants. We observed the effect of these oils over the phoride's laying in laboratory conditions. The female phoride's eggs occurred preferentially in the pollen substrate and statistically differed from those containing andiroba and copaiba oils, which was strongly reduced (until none eggs were laid, and from the substrate containing honey. These oils showed to be quite good alternative for this plague's preventive and curative control in stingless bee hives due to its repellant effect, low cost, and availability to get it in the region.

  2. AVALIAÇÃO DE PROPRIEDADES FÍSICAS E MECÂNICAS DE MADEIRAS DE JATOBÁ (Hymenaea stilbocarpa Hayne COM DIFERENTES TEORES DE UMIDADE E EXTRAÍDAS DE REGIÕES DISTINTAS1

    Directory of Open Access Journals (Sweden)

    Francisco Antonio Rocco Lahr

    2016-02-01

    Full Text Available RESUMO Este trabalho objetivou investigar a influência das regiões de extração (Municípios de Caracaraí e Bonfim, Sul de Roraima; Município de Alta Floresta, Norte de Mato Grosso da madeira da espécie jatobá (Hymenaea stilbocarpa. Também, foi avaliada a influência do teor de umidade (madeira saturada e a 12% em 15 propriedades físicas e mecânicas de interesse. Ao todo, foram preparados e ensaiados, segundo as prescrições da Norma Brasileira ABNT NR 7190 (1997, 840 corpos de prova. Os resultados da análise de variância (a 5% de significância revelaram que a região de extração dos corpos de prova não foi significativa nas propriedades físicas e mecânicas avaliadas, pois foram obtidos valores equivalentes, independentemente da origem, aspecto altamente interessante à medida que nem sempre é possível identificar a região de onde provém a madeira tropical. Essa importância é ainda maior no caso do emprego da madeira como elemento, cujos valores de referência se encontram apontados nos anexos do referido documento normativo. Com relação ao teor de umidade, foi observada diferença significativa em oito das 15 propriedades avaliadas. A condição de 12% de teor de umidade apresentou valores médios superiores à condição saturada nas propriedades de resistência na compressão paralela (37%, resistência na tração paralela (29% e cisalhamento (36% na direção paralela às fibras; módulo de resistência na flexão (26%, módulo de elasticidade na compressão paralela (9% e 200 direções paralelas (35% e normal (28% às fibras; e inferior na densidade aparente.

  3. Phytochemical and Antibacterial Investigations of the Extracts and Fractions from the Stem Bark of Hymenaea stigonocarpa Mart. ex Hayne and Effect on Ultrastructure of Staphylococcus aureus Induced by Hydroalcoholic Extract

    Directory of Open Access Journals (Sweden)

    Gustavo Santiago Dimech

    2013-01-01

    Full Text Available The aim of this study was to investigate the antimicrobial activity of different extracts and fractions obtained from Hymenaea stigonocarpa stem barks. The cyclohexanic, ethyl acetate, ethanol, aqueous, and hydroalcoholic extracts were obtained by maceration. The hydroalcoholic extract was partitioned, which resulted in the ethyl acetate and aqueous fractions. All extracts and fractions were subjected to phytochemical screening and evaluation of total phenol and tannin contents. An HPLC-DAD and ultrastructural alterations analysis were performed. Terpenes and coumarins were detected in the cyclohexanic extract. Flavonoids and condensed tannins were present in the other extracts and fractions. The extracts with the highest contents of tannins, ethanol (EE, hydroalcoholic (HE, and aqueous fraction (AF showed also the highest antimicrobial activity. The MIC values ranged from 64 to 526 µg/mL. The chromatographic fingerprints suggest the presence of astilbin and other flavonoids in EE and HE. Presence of the thick cell wall, undulating outer layer, abnormal septa, and leakage of the cytoplasmic contents and absence of cell wall and cell lyses were the main alterations observed on Staphylococcus aureus ATCC 33591 after treatment with the Hymenaea stigonocarpa hydroalcoholic extract. The presence of phenolic compounds like flavonoids and tannins is possibly the reason for the antimicrobial activity.

  4. Seeds of genus Cassia as possible sources of industrial gums

    Energy Technology Data Exchange (ETDEWEB)

    Farooqi, M I.H.; Kapoor, V P; Islam, G

    1978-01-01

    Water-soluble mucilages (gums) and their properties were determined for the seeds of twenty Indian Cassia species, including nine trees and nine shrubs. The seeds of the shrub C. alata were regarded as the best potential commercial source of gums; those of the trees C. fistula, C. grandis, C. javanica, C. marginata and C. multijuga were also promising.

  5. America’s Black Air Pioneers, 1900-1939

    Science.gov (United States)

    1988-04-01

    28 October 1911, p. 11. 22Barbour, "Early Black Flyers," 98; Elizabeth Ross Haynes, The Black Boy of Atlanta[: A Bioqraphy of Richard Robert Wright...event in 1911 (see above). By the late 1930s Wright had moved to Philadelphia and was a successful banker; see Haynes, Black Boy of Atlanta, pp. 157-58...Haynes, Elizabeth Ross. The Black Boy of Atlanta[: A Biography of Richard Robert Wright, Sr.]. Boston: House of Edinboro, 1952. Hopkins, George E

  6. A note on neighborhood total domination in graphs

    Indian Academy of Sciences (India)

    [1] Arumugam S and Sivagnanam C, Neighborhood total domination in graphs, Opuscula. Mathematica 31 (2011) 519–531. [2] Chellali M and Haynes T W, A note on the total domination number of a tree, J. Combin. Math. Combin. Comput. 58 (2006) 189–193. [3] Haynes T W, Hedetniemi S T and Slater P J, Fundamentals ...

  7. Electoral and Partisan Cycles between US Economic Performance and Presidential Popularity

    NARCIS (Netherlands)

    W. Letterie (Wilko); O.H. Swank (Otto)

    1997-01-01

    textabstractIn this paper we discuss a recent paper by Stephen E Haynes in which he relates electoral cycles in political support to electoral cycles in economic variables Haynes finds that the cycle in support for Republican presidents is explained by the cycle in economic variables, whereas the

  8. Distribution of Sandflies (Diptera:Psychodidae on Tree-trunks in a Non-flooded Area of the Ducke Forest Reserve, Manaus, AM, Brazil

    Directory of Open Access Journals (Sweden)

    MRS Cabanillas

    1999-05-01

    Full Text Available Sandflies were collected in the base of tree-trunks in the seasons of high and least rainfall in the Ducke Forest Reserve, near Manaus in the State of Amazonas. Lutzomyia umbratilis was the most abundant sandfly species. Caryocar villosum, Chrysophyllum amazonicum, Dinizia excelsa, Eschweilera atropetiolata and Parkia multijuga were the tree species on which most sandflies were collected and relative abundance were related to trunk characteristics. Seasonal patterns of sandfly distribution in the forest were observed.

  9. TREE SPECIES DIRECT SOWING FOR FOREST RESTORATION

    Directory of Open Access Journals (Sweden)

    Robério Anastácio Ferreira

    2007-09-01

    Full Text Available The direct sowing to tropical forest restoration can be viable when the ecological and silvicultural aspects of species areknown. This work evaluated the effect of breaking seed dormancy and a physical protector on the initial growth of riparian treespecies. The experiment was carried out in a randomized blocks design, in a factorial (2x2, with four blocks and four plots for eachtreatment. The treatment to break seed dormancy used were: immersion in sulphuric acid for 20 minutes and washing in water for 1hour plus soaking for 24 hours for Trema micrantha; immersion in boiling water (100oC with following soaking until refreshing for24 hours to Senna multijuga and Senna macranthera and pre-soaking in water for 2 hours for Solanum granuloso-leprosum. Thephysical protector used was a transparent plastic cup (500mL. The breaking seed dormancy used was efficient in laboratory, exceptfor S. macranthera. In field conditions, it was efficient only for S. multijuga and S. macranthera. The physical protector did notpresented any benefit for the studied tree species regarding seedlings emergence and survival, but it provided significant differencesin height and base diameter for S. multijuga and in height for S. macranthera after three months. After 24 months, T. micranthapresented the highest values for height and basal diameter. S. macranthera presented the height relative growth and T. micrantha thehighest basal diameter. The studied species can be recommended for ecological forest restoration, using direct sowing.

  10. Abordagem toxicológica da C

    African Journals Online (AJOL)

    Muller

    reproductive and foetal toxicity, of the ethanol extract from Copaifera luetzelburgii (EEtOH-Cl). In the ... EEtOH-Cl. In the first group, the effect of the extract on the development of pregnancy from first to seventh day was .... Chemicals and drugs.

  11. Hemingway oli KGB, filmistaar Errol Flynn natside agent? / Tõnis Erilaid

    Index Scriptorium Estoniae

    Erilaid, Tõnis, 1943-

    2009-01-01

    John Earl Haynes, Harvey Klehr ja Alexander Vassiliev väidavad oma raamatus "Spies : The Rise and Fall of the KGB in America", et Ernest Hemingway oli 1940ndail aastail KGB ning Errol Flynn 1930ndatel aastatel natside agent

  12. Philosophical enquiry as a pedagogical tool to implement the CAPS ...

    African Journals Online (AJOL)

    Windows User

    2016-02-22

    Feb 22, 2016 ... A previous study suggested that pre-service teachers benefitted from exposure to this pedagogy. The aim ...... MA: Harvard University Press. Haynes J & Murris K ... resource book for teaching thinking (3rd ed). Alexandria, VA: ...

  13. Extracting Information Based on Partial or Complete Network Data

    African Journals Online (AJOL)

    pc

    2018-03-05

    Mar 5, 2018 ... depth and breadth first search network traversal do not perform well overall .... work was created using the Python's preferential attachment ..... [13] J. Boland, T. Haynes, and L. Lawson, “Domination from a distance,”. Congr.

  14. The Rise of Casual Work in Nigeria: Who Loses, Who Benefits?

    African Journals Online (AJOL)

    Toshiba

    India ( Jenkins, 2004) and Australia (Buchler, Haynes and Baxter,. 2009), showed that ... 2000 in an industry, out of which about 1500 may be casual workers. (Okafor ... Federal Bureau of statistics showed that Nigeria has a youth population of ...

  15. Bipolar Treatment: Are Bipolar I and Bipolar II Treated Differently?

    Science.gov (United States)

    ... The diagnosis and management of bipolar I and bipolar II disorders: Clinical practice update. Mayo Clinic Proceedings. 2017;92:1532. Haynes PL, et al. Social rhythm therapies for mood disorders: An update. Current Psychiatry Reports. ...

  16. Effect of Surface Impulsive Thermal Loads on Fatigue Behavior of Constant Volume Propulsion Engine Combustor Materials

    National Research Council Canada - National Science Library

    Zhu, Dongming

    2004-01-01

    .... In this study, a simulated engine test rig has been established to evaluate thermal fatigue behavior of a candidate engine combustor material, Haynes 188, under superimposed CO2 laser surface impulsive thermal loads (30 to 100 Hz...

  17. Identification of Two New Protective Pre-erythrocytic Malaria Vaccine Antigen Candidates

    Science.gov (United States)

    2011-01-01

    Anthony R, Grainger M, Haynes J, Moch J, Muster N, Sacci J, Tabb D, Witney A, Wolters D, Wu Y, Gardner M, Holder A, Sinden R, Yates J, Carucci D: A...proteomic view of the Plasmodium falciparum life cycle. Nature 2002, 419:520-526. 16. LeRoch D, Zhou Y, Blair P, Grainger M, Moch J, Haynes J, De La Vega P

  18. Cognitive Behavioral Social Rhythm Therapy (CBSRT) for Sleep and Mood Disturbances in Veterans with PTSD

    Science.gov (United States)

    2012-09-01

    Patricia.Haynes3@va.gov Fax: (520) 626-6050 E-mail: thaynes@email.arizona.edu Home Address: Citizenship : United States 2828 W. Calle...of the Ambivalent Sleeper [Board Review Question]. Journal of Clinical Sleep Medicine, 15, 511-512. Haynes, P. L. (2009). Is CBT-I effective for...Support Networks in Asymptomatic Individuals with a History of Depression Versus Never-Depressed Individuals. Personal Life Events: Birth of Child

  19. Notas sobre frutos y semillas de plantas colombianas I. Parkia (Fabaceae: Mimosoidae

    Directory of Open Access Journals (Sweden)

    Edgar Linares

    2000-07-01

    Full Text Available En el presente trabajo se llevó a cabo el estudio de los frutos y sernillas de los géneros de Parkia distribuidos en Colombia. En dicho estudio, realizado con ejemplares de colección del Herbario Nacional Colombiano, se encontraron siete especies pertenecientes a dicho genero (P. igneif1ora, P. discolor, P. multijuga, P. nitido, P. panarensis, P. pendulo, P. velutina, a cada una de las cuales se le realizó la descripción detallada de los frutos y las semillas y se elaboraron dibujos en los cuales se resaltan los caracteres más sobresalientes.

  20. New Search Strategies Successfully Optimize Retrieval of Clinically Sound Treatment Studies in EMBASE. A review of: Wong, Sharon S‐L, Nancy L. Wilczynski, and R. Brian Haynes. “Developing Optimal Search Strategies for Detecting Clinically Sound Treatment Studies in EMBASE.” Journal of the Medical Library Association 94.1 (Jan. 2006: 41‐47. 14 May 2007 http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=1324770.

    Directory of Open Access Journals (Sweden)

    John Loy

    2007-06-01

    Full Text Available Objective – To develop and test the sensitivity and specificity, precision andaccuracy of search strategies to retrieve clinically sound treatment studies in the EMBASE database.Design – Analytical study.Setting – Methodologically sound studies of treatment from 55 journals indexed in EMBASE for the year 2000.Subjects – EMBASE and hand searches performed at the Health Information Research Unit of McMaster University, Ontario, Canada.Methods – The authors compare the results of EMBASE searches using their search strategies with the “gold standard” of articles retrieved by hand search. Research assistants initially hand searched each issue of 55 selected journals published in 2000 to identify articles detailing studies on healthcare treatment of humans. Subject coverage of the journals was wide ranging and included obstetrics and gynaecology, psychiatry, oncology, neurology, surgery and general practice. Studies were then assessed to ensure they met the qualifying criteria: random allocation of participants to groups, outcome assessment of at least 80% of participants who began the study, and analysis consistent with study design. Initially, 3850 articles on treatment were identified, of which 1256 (32.6% were methodologically sound. To construct a comprehensive set of search terms, input was sought from librarians and researchers in the US and Canada. This initially produced a list of 5385 terms, of which 4843 were unique and 3524 produced hits. Individual search terms with sensitivity greater then 25% and specificity greater then 75% were incorporated into search strategies for use within the OVID interface for the EMBASE database to retrieve articles meeting the same criteria. These strategies were developed using all 27,769 articles published in the 55 journals in 2000. This all inclusive approach was used to test the search strategies’ ability to identify high quality treatment articles from a larger pool of material.Main results – The single term which achieved best sensitivity was “random:mp,”with a sensitivity of 95.1%. This same term achieved a high specificity of 92.5%. The best‐performing single term for specificity was “randomized:tw” at 96.7%, but this did reduce sensitivity to 63.2%. The single term to achieve the best balance between the two was “clinical trial:mp,” with a sensitivity of 88.3% and specificity of 88.0%. Combining terms produced varied results, and Table 3 within the article details terms used to give the best combinations for sensitivity, specificity and optimisation of both. The best three‐term search strategies for sensitivity achieved a rate just shy of 99% with a specificity of 72.0%, while the optimum three‐term strategy for specificity achieved 96.7% but with a trade off of lowering the rate of sensitivity to 51.7%. The best‐performing combination of search terms to optimise sensitivity and specificity produced values exceeding 92% for both.Conclusion – The authors present search strategies which can successfully be used to retrieve methodologically sound studies on the prevention and treatment of disease and health complications indexed on the EMBASE database. A clear outline of the trade‐off between sensitivity and specificity of the strategies is included.

  1. Cassia renigera Wall.: novo hospedeiro de Ceratocystis fimbriata Ell. & Halst. Cassia renigera Wall.: a new host of Ceratocystis fimbriata Ell. & Halst.

    Directory of Open Access Journals (Sweden)

    Ivan José Antunes Ribeiro

    1987-01-01

    Full Text Available Ceratocystis fimbriata foi descrito pela primeira vez em 1984, causando murcha em plantas de Cassia renigera, em Campinas (SP. Foram realizadas inoculações cruzadas com dois isolados de C. fimbriata obtidos de Cassia renigera e mangueira (Mangifera indica em plantas de: acácia-negra (Acacia decurrens, cacaueiro (Theobroma cacao, crotalária (Crotalaria juncea, feijão-guandu (Cajanus cajan, figueira (Ficus carica, gamelina (Gmelina arborea, mangueira (Mangifera indica, seringueira (Hevea brasilienses, Cassia sp., C. carnaval, C. ferruginea, C. grandis, C. moschata, C. multijuga, C. nodosa, C. renigera, C. siamea e C. speciosa. Os dois isolados do fungo foram patogênicos a todas as plantas testadas, com exceção de cacaueiro, gamelina e C. grandis.Ceratocystis fimbriata Ell. & Halst. is described for the first time in 1984 on Cassia renigera, in Campinas, State of São Paulo, Brazil. In cross inoculation, the isolates of C. fimbriata obtained from Cassia renigera and from Mangifera indica showed pathogenicity to the following plants: Acacia decurrens, Theobroma cacao, Crotalaria juncea, Cajanus cajan, Ficus Carica, Gmelina arborea, Mangifera indica, Hevea brasiliensis, Cassia sp., C. carnaval, C. ferruginea, C. grandis, C. moschata, C. multijuga, C. nodosa, C. renigera, C. siamea and C. speciosa. The isolates of C. fimbriata were pathogenic to all tested plants, except for Theobroma cacao, Gmelina arborea and C. grandis.

  2. High-resolution hydro- and geo-stratigraphy at Atlantic Coastal Plain drillhole CR-622 (Strat 8)

    Science.gov (United States)

    Wrege, B.M.; Isely, J.J.

    2009-01-01

    We interpret borehole geophysical logs in conjunction with lithology developed from continuous core to produce high-resolution hydro- and geo-stratigraphic profiles for the drillhole CR-622 (Strat 8) in the Atlantic Coastal Plain of North Carolina. The resulting hydrologic and stratigraphic columns show a generalized relation between hydrologic and geologic units. Fresh-water aquifers encountered are the surficial, Yorktown, Pungo River and Castle Hayne. Geologic units present are of the middle and upper Tertiary and Quaternary periods, these are the Castle Hayne (Eocene), Pungo River (Miocene), Yorktown (Pliocene), James City and Flanner Beach (Pleistocene), and the topsoil (Holocene). The River Bend Formation (Oligocene) is missing as a distinct unit between the Pungo River Formation and the Castle Hayne Formation. The confining unit underlying the Yorktown Aquifer corresponds to the Yorktown Geologic Unit. The remaining hydrologic units and geologic units are hydrologically transitional and non-coincident. The lower Pungo River Formation serves as the confining unit for the Castle Hayne Aquifer, rather than the River Bend Aquifer, and separates the Pungo River Aquifer from the upper Castle Hayne Aquifer. All geologic formations were bound by unconformities. All aquifers were confined by the anticipated hydrologic units. We conclude that CR-622 (Strat 8) represents a normal sequence in the Atlantic Coastal Plain.

  3. Pollen analysis of honey and pollen collected by Apis mellifera linnaeus, 1758 (Hymenoptera, Apidae), in a mixed environment of Eucalyptus plantation and native cerrado in Southeastern Brazil.

    Science.gov (United States)

    Simeão, C M G; Silveira, F A; Sampaio, I B M; Bastos, E M A F

    2015-11-01

    Eucalyptus plantations are frequently used for the establishment of bee yards. This study was carried on at Fazenda Brejão, northwestern region of the State of Minas Gerais, Brazil. This farm is covered both with native Cerrado vegetation (Brazilian savanna) and eucalyptus plantations. This paper reports on the botanic origin of pollen pellets and honey collected from honeybee (Apis mellifera) hives along a thirteen-month period (January 2004 to January 2005). The most frequent pollen types found in the pollen pellets during the rainy season were Trema micrantha (Ulmaceae), Copaifera langsdorffii (Fabaceae), an unidentified Poaceae, unidentified Asteraceae-2, Cecropia sp. 1 (Cecropiaceae) and Eucalyptus spp. (Myrtaceae); during the dry season the most frequent pollen types were Acosmium dasycarpum (Fabaceae), Cecropia sp. 1 (Cecropiaceae) and Eucalyptus spp. (Myrtaceae). Pollen grains of Baccharis sp. (Asteraceae), Cecropia sp. 1 (Cecropiaceae), Copaifera langsdorffii (Fabaceae), Mimosa nuda (Fabaceae), Eucalyptus spp. (Myrtaceae) and Trema micrantha (Ulmaceae) were present in the honey samples throughout the study period.

  4. Mechanical characterization of superalloys for space reactors

    International Nuclear Information System (INIS)

    Duchesne, J.

    1989-01-01

    The aim of this work is the selection of structural materials that can be used in the temperature range 600-900 0 C for a gas cooled space reactor producing electricity. Superalloys fit best the temperature range required. Five nickel base alloys are chosen for their good mechanical behaviour: HAYNES 230, HASTELLOY S, HASTELLOY X, HASTELLOY XR and PYRAD 38D. Metallography, tensile and hardness tests are realized. Sample contraction is evidenced for some creep tests, under low stress: 20MPa at 800 0 C, on HAYNES 230 and HASTELLOY X, probably related to the structural evolution of these materials corresponding to a decrease of the crystal parameter [fr

  5. Huntidega Kanadasse lumme müttama

    Index Scriptorium Estoniae

    2007-01-01

    Whitbread'i kirjanduspreemia vahetas alanud aastal sponsorit. Kuulutati välja Costa kirjandusauhinna võitjad viies kategoorias. Debüütromaani auhinna võitis Stef Penney romaaniga "The tenderness of wolves". Romaani auhind läks William Boydile, elulooauhind Brian Thompson'ile, luuleauhind John Haynes'ile, auhind parima lasteraamatu eest Linda Newbery'le

  6. Exploring the Relationships among Race, Class, Gender, and Middle School Students' Perceptions of School Racial Climate

    Science.gov (United States)

    Watkins, Natasha D.; Aber, Mark S.

    2009-01-01

    Although school climate has been thought to be especially important for racial minority and poor students (Booker, 2006; Haynes, Emmons, & Ben-Avie, 1997), little research has explored the significance of racial climate for these students. Furthermore, research in the area has tended to treat race, socioeconomic class, and gender separately,…

  7. Parents' and Teachers' Perceptions of Effective Communication in Two Schools in One Division in Virginia

    Science.gov (United States)

    Lipscomb, Kecia O.

    2015-01-01

    Parents often perceive schools as the sole educator of their child when in actuality the school prefers parents to be involved as partners in the learning process (Comer & Haynes, 1991). Likewise, schools make the assumption that parents realize their role in the learning process, but do not effectively communicate the partnership to parents,…

  8. Sprout selection and performance of goats fed Acacia karroo ...

    African Journals Online (AJOL)

    Mr Casper Nyamukanza

    Goats are important browsers in the Eastern Cape Province, which keeps ... Acacia karroo Hayne (Fabaceae = Leguminosae) trees are abundant and able to ... savanna and consists of subtropical thicket vegetation dominated by deciduous woody shrubs shorter than ..... National Academy Press, Washington, D.C., USA.

  9. The Magic Shrinking Machine Revisited: The Presence of Props at Recall Facilitates Memory in 3-Year-Olds

    Science.gov (United States)

    Dahl, Jonna J.; Kingo, Osman S.; Krøjgaard, Peter

    2015-01-01

    In a seminal study Simcock and Hayne (2002) showed that 3-year-olds were unable to use newly acquired words to describe a "magic" event experienced 6 or 12 months earlier. In the reference study the children's verbal recall was tested without props being present. Inspired by recent evidence, the original design was replicated, testing…

  10. Pilot-plant testing of materials proposed for use as NWCF feed and fuel nozzle caps

    International Nuclear Information System (INIS)

    Birrer, S.A.

    1980-12-01

    Results of a series of tests performed on materials proposed for use at New Waste Calcining Facility (NWCF) fuel and feed nozzle caps are described. Results show that Haynes Alloys 25 and 188 and Inconel Alloys 617, 625, and 690 have acceptable corrosion and erosion rates based upon the high-temperature oxidation, erosion, and corrosion tests conducted

  11. A Wind-Forced Modeling Study of the Canary Current System from 30 Degrees N to 42.5 Degrees N

    Science.gov (United States)

    1998-06-01

    and Haynes and Barton (1990), using high resolution infra-red images from NOAA7 and NOAA9 and numerous in- situ measurements, reveal the existence of...dinamica das Aguas costeiras de Portugal. Dissertacao apresentada a Universidade de Lisboa para obtencao do grau de Doutor em Fisica, especializacao

  12. Complement and Antibody-Mediated Enhancement of Erythrocyte Invasion by Plasmodium Falciparum

    Science.gov (United States)

    2016-04-01

    Haynes, J.D., Moch , J.K., Smoot, D.S., 2002. Erythrocytic malaria growth or invasion inhibi- tion assays with emphasis on suspension culture GIA... Moch , J.K., Finberg, R.W., Tsokos, G.C., Stoute, J.A., 2010. Complement receptor 1 is a sialic acid-independent erythrocyte receptor of Plasmodium

  13. Utilisation de la Technique D\\'électrophorèse des Protéines Totales ...

    African Journals Online (AJOL)

    Utilisation de la Technique D\\'électrophorèse des Protéines Totales sur Gel de Polyacrylamide-SDS (SDS-PAGE) pour L\\'étude de la Diversité des Rhizobiums D\\'Acacia tortilis (Forsk.) Hayne Subsp. Raddiana (Savi) Brenan.

  14. The Florida Prostate Cancer Research Training Opportunities for Outstanding Leaders (ReTOOL (registered trademark)) Program: Creating Opportunities for Minority HBCU Students

    Science.gov (United States)

    2013-03-01

    underserved. (MA Haynes & BD Smedley (Eds). National Academy Press, Washington DC. 2. Norris KC, Agodoa LY (2005). The need for health professionals... Robert Vessella, PhD University of Washington Medical Center 44 10:30 – 10:45 am S-10 A Targeted Approach to Prostate Radiotherapy Alan

  15. Building a Unit-Level Mentored Program to Sustain a Culture of Inquiry for Evidence-Based Practice

    Science.gov (United States)

    2015-03-24

    Melnyk and Eileen Fineout-Overholt, who graciously and consistently support military nursing science. Building a Unit-Level Mentored Program...Rosenberg W, Gray JA, Haynes RB, Richardson WS. Evidence based medicine: What it is and what it isn’t. BMJ. 1996;312(7023):71-72.doi: http

  16. What about Social Value?

    Science.gov (United States)

    Beauvois, Jean-Leon; Depret, Eric

    2008-01-01

    We focus on three aspects of the articles of Reyna, of Perry, Stupnisky, Daniels and Haynes, and of Murdock, Beauchamp and Hinton. The first aspect is the logic of causal chain, a logic that we differentiate from a more deterministic approach. The second one is the mode of corrective action (attribution retraining) that is planned for students,…

  17. VizieR Online Data Catalog: HI-bearing ultra-diffuse ALFALFA galaxies (Leisman+, 2017)

    Science.gov (United States)

    Leisman, L.; Haynes, M. P.; Janowiecki, S.; Hallenbeck, G.; Jozsa, G.; Giovanelli, R.; Adams, E. A. K.; Neira, D. B.; Cannon, J. M.; Janesh, W. F.; Rhode, K. L.; Salzer, J. J.

    2018-02-01

    All sources discussed here have available SDSS and ALFALFA data. The ALFALFA observations, data reduction, and catalog products are detailed elsewhere (e.g., Giovanelli+ 2005AJ....130.2598G ; Saintonge 2007AJ....133.2087S ; Haynes+ 2011, J/AJ/142/170). (1 data file).

  18. Kuus näitlejat, üks Bob Dylan / Jaanus Noormets

    Index Scriptorium Estoniae

    Noormets, Jaanus

    2008-01-01

    Todd Haynes'i mängufilm muusik Bob Dylanist "Kus on Bob Dylan?" ("I'm Not There") : laulja alter ego kehastavad Ben Whishaw, Christian Bale, Heath Ledger, Cate Blanchett, Richard Gere, Marcus Carl Franklin : Ameerika Ühendriigid 2007

  19. Kus ta siis ometi on - see Bob Dylan? / Immo Mihkelson

    Index Scriptorium Estoniae

    Mihkelson, Immo, 1959-

    2008-01-01

    Todd Haynes'i mängufilm muusik Bob Dylanist "Kus on Bob Dylan?" ("I'm Not There") : laulja alter ego kehastavad Ben Whishaw, Christian Bale, Heath Ledger, Cate Blanchett, Richard Gere, Marcus Carl Franklin : Ameerika Ühendriigid 2007. 4. juunil Saku Suurhallis toimuvast kontserdist. Jaak Johanson, Tõnis Mägi, Riho Sibul, Hannes Varblane ameerika lauljast

  20. 33 CFR 117.829 - Northeast Cape Fear River.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Northeast Cape Fear River. 117... BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements North Carolina § 117.829 Northeast Cape... the Seaboard System Railroad Bridge across the Northeast Cape Fear River, mile 27.0, at Castle Hayne...

  1. Quenching of Emission and of Photochemistry for Aqueous Rh(NH3)5Cl(2+).

    Science.gov (United States)

    1979-04-01

    Hueneme, CalifornIa 93041 Attn: Dr. R. 3. Marcus 1 Attn: Mr. W. S. Haynes ONR Branch Offi ce Professor 0. Hein7 760 Market Street , Rm. 447...Peebles 1 WashI ngton, D.C. 20380 Directo r, Naval Research Laboratory Offi ce of Naval Researc hWashington, D.C. 20390 Arlington, VIrginia 22217

  2. Heidegger and Leibniz: Reason and Faith

    African Journals Online (AJOL)

    denise

    Heidegger and Leibniz: Reason and Faith. Renato Cristin (1998). Heidegger and Leibniz: Reason and Faith. Dordrecht: Kluwer Academic Publishers. Hard Cover (130 pages + index) by Felicity Haynes. Cristin sets out to analyze. Heidegger's treatment and use of Leibniz, and in so doing presents a view of. Leibniz which ...

  3. 2068-IJBCS-Article-Saidou Ousseina

    African Journals Online (AJOL)

    hp

    que Schoenefeldia gracilis Kunth., Aristida mutabilis Trin. et Rupr., Dactyloctenium aegyptiaca (L.) Willd., Tribulus terrestris L. (Ousseina, 2012) parsemée de plantes ligneuses (Maerua crassifolia. Forsk.,. Balanites aegyptiaca (L.) Del., Acacia senegal (L.) Willd., Acacia tortilis (Forssk.) Hayne subsp. raddiana (Savi) Brenan,.

  4. Social Networks in the workplace - some data protection issues

    OpenAIRE

    Haynes, D.

    2011-01-01

    There are many benefits to be gained from using social networks in the workplace but there is a downside – a growing concern about privacy and misuse of personal information. Using the results from a survey he conducted to highlight the issues, David Haynes puts forward an approach to managing social networks through the introduction of organisational policy.

  5. Plantas medicinais: a necessidade de estudos multidisciplinares

    Directory of Open Access Journals (Sweden)

    Maciel Maria Aparecida M.

    2002-01-01

    Full Text Available This paper presents a program emphasizing ethnopharmacological approaches that could allow great success in the study of medicinal plants. The minimum ethnopharmacological research team should consist of a botanist, a chemist and a pharmacologist with each carrying the responsibility for answering in sequential fashion critical questions. The chemical composition and pharmacological properties of the very efficient medicinal plant Croton cajucara were investigated according to ethnopharmacological approaches. The study with this Croton proved to be both efficient and successful. This happy situation was only possible because a multidisciplinary team was involved getting the research done correctly. The ethnopharmacological study involving one other especies Copaifera will be cited.

  6. An Ecological Comparison of Floristic Composition in Seasonal Semideciduous Forest in Southeast Brazil: Implications for Conservation

    OpenAIRE

    Lopes, Sérgio de Faria; Schiavini, Ivan; Oliveira, Ana Paula; Vale, Vagner Santiago

    2012-01-01

    We examined floristic patterns of ten seasonal semideciduous forest sites in southeastern Brazil and conducted a central sampling of one hectare for each site, where we took samples and identified all individual living trees with DBH (diameter at breast height, 1.30 m) ≥4.8 cm. Arboreal flora totaled 242 species, 163 genera, and 58 families. Fabaceae (38 species) and Myrtaceae (20 species) were families with the largest number of species. Only Copaifera langsdorffii and Hymenaea courbaril occ...

  7. Pollen analysis of honey and pollen collected by Apis mellifera linnaeus, 1758 (Hymenoptera, Apidae, in a mixed environment of Eucalyptus plantation and native cerrado in Southeastern Brazil

    Directory of Open Access Journals (Sweden)

    C. M. G. Simeão

    Full Text Available Abstract Eucalyptus plantations are frequently used for the establishment of bee yards. This study was carried on at Fazenda Brejão, northwestern region of the State of Minas Gerais, Brazil. This farm is covered both with native Cerrado vegetation (Brazilian savanna and eucalyptus plantations. This paper reports on the botanic origin of pollen pellets and honey collected from honeybee (Apis mellifera hives along a thirteen-month period (January 2004 to January 2005. The most frequent pollen types found in the pollen pellets during the rainy season were Trema micrantha (Ulmaceae, Copaifera langsdorffii (Fabaceae, an unidentified Poaceae, unidentified Asteraceae-2, Cecropia sp. 1 (Cecropiaceae and Eucalyptus spp. (Myrtaceae; during the dry season the most frequent pollen types were Acosmium dasycarpum (Fabaceae, Cecropia sp. 1 (Cecropiaceae and Eucalyptus spp. (Myrtaceae. Pollen grains of Baccharis sp. (Asteraceae, Cecropia sp. 1 (Cecropiaceae, Copaifera langsdorffii (Fabaceae, Mimosa nuda (Fabaceae, Eucalyptus spp. (Myrtaceae and Trema micrantha (Ulmaceae were present in the honey samples throughout the study period.

  8. Tombamento de mudas de espécies florestais causado por Sclerotium rolfsii Sacc Damping-off of forest species caused by Sclerotium rolfsii Sacc

    Directory of Open Access Journals (Sweden)

    Reginaldo Gonçalves Mafia

    2007-08-01

    Full Text Available O estudo objetivou avaliar a gama de hospedeiros de Sclerotium rolfsii por inoculação controlada das seguintes espécies florestais nativas e exóticas: Anadenanthera peregrina (angico-vermelho, Chorisia speciosa (paineira-rosa, Clitoria fairchildiana (sombreiro, Copaifera langsdorffii (copaíba, Delonix regia (flamboyant-vermelho, Enterolobium contortisiliquum (orelha-de-negro, Leucaena leucocephala (leucena, Mabea fistulifera (canudo-de-pito, Platymiscium pubescens (tamboril-da-mata, Senna macranthera (fedegoso, Spathodea campanulata (espatódea e Tabebuia avellanedae (ipê-roxo, bem como comprovar o tombamento de mudas em pré e pós-emergência. Todas as espécies foram suscetíveis ao tombamento de mudas causado por S. rolfsii, em pré e em pós-emergência.The host range of Sclerotium rolfsii was evaluated by controlled inoculation of the following native and exotic forest species: Anadenanthera peregrina (angico vermelho, Chorisia speciosa (paineira rosa, Clitoria fairchildiana (sombreiro, Copaifera langsdorffii (copaíba, Delonix regia (flamboyant vermelho, Enterolobium contortisiliquum (orelha de negro, Leucaena leucocephala (leucena, Mabea fistulifera (canudo-de-pito, Platymiscium pubescens (tamboril da mata, Senna macranthera (fedegoso, Spathodea campanulata (espatódea e Tabebuia avellanedae (ipê roxo. The fungus caused damping-off in pre and post emergence in all tested species.

  9. Effect of long-term aging at 8150C on the tensile properties and microstructural stability of four cobalt- and nickel-base superalloys

    International Nuclear Information System (INIS)

    Hammond, J.P.

    1976-08-01

    Two heats of Haynes alloy 25 and one heat each of Haynes alloy 188, Hastelloy N, and Inconel 625 were tensile tested after aging for 11,000 h at 816 0 C. Yield strength, ultimate tensile strength, and elongation were determined 24, 316, 760, and 982 0 C and compared with typical properties for these materials in the solution annealed condition. Toughness values were determined for these materials from their engineering stress-strain curves. The long-term aging treatment degraded ductility and toughness at room temperature but, contrary to behavior expected for overaging, enhanced them over those for the solution annealed condition in tests at 760 0 C. The tensile properties of the aged superalloys were correlated with mode of fracture and the amounts, identity, and morphology of the precipitates. Aging substantially depleted the hardener tungsten from the matrix in the cobalt-base alloys

  10. Estimating dispersion from a tornado vortex and mesocyclone

    International Nuclear Information System (INIS)

    Weber, A.H.; Hunter, C.H.

    1996-06-01

    Atmospheric dispersion modeling is required to ensure that a postulated breach in radionuclide storage containers at the Savannah River Site (SRS) from a tornado strike of Fujita-scale intensity F2 or higher will not result in an unacceptable dose to individuals. Fujita-scale tornado descriptions are included in Appendix A of this report. Dispersion models previously used at SRS for estimating dispersion following a tornado strike were developed by D.W. Pepper in 1975 (DP-1387, Dispersion of Small Particles) and H.R. Haynes and D.W. Taylor in 1983 (DPST-82-982, Estimating Doses from Tornado Winds). Research conducted in 1983 on the formation and evolution of tornadic thunderstorms has lead to a more complete understanding of the tornado vortex and associated persistent updraft and downdraft regions within the parent thunderstorm. To ensure that appropriate, contemporary methods are used for safety analysis, the Pepper model and the Haynes and Taylor model were evaluated with respect to current knowledge of circulations within tornadic thunderstorms. Pepper's model is complex numerically but contains most of the desired physical parameterizations. Haynes and Taylor's model is used with the Puff-Plume model (an emergency response model on the Weather INformation and Display System at SRS) and has provisions for radionuclide deposition and rainout. Haynes and Taylor assumed heavy rain following the tornado for a period of ten minutes, followed by a lighter rain for another ten minutes, then no rain for the period when the material is transported to 100 km downwind. However, neither model incorporates the effects of a nearby thunderstorm downdraft

  11. Examining the Psychometric Properties of the Turkish Version of the Parent School Climate Survey and Measuring of Parents’ Perceptions of School Climate by Gender

    OpenAIRE

    Bugay, Aslı; Avcı, Dilek; Özdemir, Selçuk

    2018-01-01

    The studyinvestigated the psychometric properties of the Turkish version of the ParentSchool Climate Survey. The survey was developed by Haynes, Emmons and Comer(1994) to measure the school adaptation and the quality of student-adultrelationship. The scale consists of eight sub-dimensions: academic focus,achievement motivation, attention and sensitivity of school director,collaborative decision-making, parent participation, school building,school-community relationship, and student-teacher re...

  12. Performance and Thrust-to-Weight Optimization of the Dual-Expander Aerospike Nozzle Upper Stage Rocket Engine

    Science.gov (United States)

    2012-06-01

    for chamber cooling jacket, structural jacket, and O2 plumbing INCONEL ® 625 (Annealed) Aluminum 7075 T6 Not compatible with O2 or H2 / Useable for...Special Metals. INCONEL (R) alloy 625 . Publication Number SMC-063. Special Metals Corporation, 2006. [20] Haynes International. "Heat-Resistant Alloy...Copper (C17000 TH04) Oxygen-Free Copper (C10100 1180 Temper) Cobalt (Forged Electrolytic) INCONEL ® 718 (Annealed & Aged) Compatible with O2 / Useable

  13. Environmental characteristics of tropical coral reef-seagrass dominated lagoons (Lakshadweep, India) and implications to resilience to climate change.

    Digital Repository Service at National Institute of Oceanography (India)

    Nobi, E.P.; DineshKumar, P.K.

    , also known as rainforests of the sea, are some of the most diverse ecosystems on earth (Davidson 1998). The health, abundance and diversity of organisms of coral reef ecosystems are directly linked to the surrounding marine environment. Seagrass beds... to a disturbed ecosystem (Gunderson 2000). Since the health and growth of coral and seagrass are regulated by several factors, the environmental monitoring of the coral ecosystem is a challenging study (Bulthius 1983; Haynes et al. 2005; Prange et...

  14. Environmental Aspects of Artificial Aeration and Oxygenation of Reservoirs: A Review of Theory, Techniques, and Experiences.

    Science.gov (United States)

    1982-05-01

    1970; Sirenko et al. 1972; Weiss and Breedlove 1973; Nicholls et al . 1980). In a few experiments, increases in the blue-green Aphanizomenon flos- aguae ...of A. flos- aguae however (Haynes 1975). The timing of mixing in relation to the peak of an algal bloom and the degree of surface microstratification...of particle ingested. Limnol. Oceanogr. 13:675-678. Burns, N.M., and F. Rosa. 1980. In situ measurement of the settling velocity of organic carbon

  15. Global Markets and the Health of American Forests: A Forest Service Perspective

    Science.gov (United States)

    Sally Collins; David Darr; David Wear; Hutch Brown

    2008-01-01

    The United States is rich in forests, yet about 39% of the softwood lumber used by Americans in 2005 came from other countries (WWPA 2006). In fact, the United States has not been “self-sufficient” in lumber (with exports exceeding imports) for more than 40 years. According to Haynes et al. (2007), the trade deficit in lumber has grown from 4.1 billion board feet (bbf...

  16. Ex Vivo Drug Sensitivity Profiles of Plasmodium falciparum Field Isolates from Cambodia and Thailand, 2005 to 2010, Determined by a Histidine-Rich Protein-2 Assay

    Science.gov (United States)

    2012-06-13

    References 1. Desjardins RE, Canfield CJ, Haynes JD, Chulay JD: Quantitative assessment of antimalarial activity in vitro by a semiautomated...potentially concerning. As before, un- regulated availability of antimalarial medications during that period may have been a contributing factor. Not- ably...et al. observed a similar dip in IC50 values for a range of antimalarial drugs in 2006, and attributed the observa- tion to sampling bias since most

  17. Optimizing the HRP-2 In Vitro Malaria Drug Susceptibility Assay Using a Reference Clone to Improve Comparisons of Plasmodium falciparum Field Isolates

    Science.gov (United States)

    2012-09-13

    6. Desjardins RE, Canfield CJ, Haynes JD, Chulay JD: Quantitative assessment of antimalarial activity in vitro by a semiautomated microdilution...vitro antimalarial drug efficacy testing and application to clinical isolates. Antimicrob Agents Chemother 2007, 51:1172–1178. 12. Akala HM, Eyase FL...Cheruiyot AC, Omondi AA, Ogutu BR, Waters NC, Johnson JD, Polhemus ME, Schnabel DC, Walsh DS: Antimalarial drug sensitivity profile of western Kenya

  18. Core Operations of the Metals and Ceramics Information Center (A DoD information Analysis Center)

    Science.gov (United States)

    1990-08-30

    1214 Hy-Tuf Steel 12 Sep 4208 Wassaloy? 36 Dec 1215 Nitralloy 135 Mod 8 Dec 4310 Haynes Alloy 188 40 1987 Mar 1203 4140 Sterl 34 Mar 1601 A-286 Steel 37...BE /Ej*Az5 pofj.’t FRACT UjPE CATA FOR AISI 521 ,O ALLCY STEEL r-L’I1 AFS. 6 L Pesconm C OPY OF SELECTED DATA FAxED ,-T LCCP"EED 1MILES A AE OPol.es

  19. Proceedings of the AMEDD (Army Medical Department) Clinical Psychology Short Course: Military Applications of Neuropsychology and Health Psychology Held in Presidio of San Francisco, California on 9-13 March 1987. Volume 1

    Science.gov (United States)

    1987-03-01

    syndrome. Medical Clinics of North America, 70, 708-719. Barnes, Deborah (1986) Grim projections for AIDS epidemic. Science, 232, 1589- 1590 . Bennett, J. A...65_ 96-97. Redfield, R. R., Wright, D. C. & Tramount, E. C. (1986) The Walter Reed staging classification for IfrLV-IIt/LAV Infection. The New England ... women with blood and cardiovascular findings. Circulation, 24, 1173-1184. Sackett, D., Taylor, D., Haynes, R., Johnson, A., Gibson, E., & Roberts, R

  20. Correlation of creep rate with microstructural changes during high temperature creep

    Science.gov (United States)

    Young, C. T.; Sommers, B. R.; Lytton, J. L.

    1977-01-01

    Creep tests were conducted on Haynes 188 cobalt-base alloy and alpha titanium. The tests on Haynes 188 were conducted at 1600 F and 1800 F for stresses from 3 to 20 ksi, and the as-received, mill-annealed results were compared to specimens given 5%, 10%, and 15% room temperature prestrains and then annealed one hour at 1800 F. The tests on alpha titanium were performed at 7,250 and 10,000 psi at 500 C. One creep test was done at 527 C and 10,000 psi to provide information on kinetics. Results for annealed titanium were compared to specimens given 10% and 20% room temperature prestrains followed by 100 hours recovery at 550 C. Electron microscopy was used to relate dislocation and precipitate structure to the creep behavior of the two materials. The results on Haynes 188 alloy reveal that the time to reach 0.5% creep strain at 1600 F increases with increasing prestrain for exposure times less than 1,000 hours, the increase at 15% prestrain being more than a factor of ten.

  1. An innovation diffusion model of a local electricity network that is influenced by internal and external factors

    Science.gov (United States)

    Hattam, Laura; Greetham, Danica Vukadinović

    2018-01-01

    Haynes et al. (1977) derived a nonlinear differential equation to determine the spread of innovations within a social network across space and time. This model depends upon the imitators and the innovators within the social system, where the imitators respond to internal influences, whilst the innovators react to external factors. Here, this differential equation is applied to simulate the uptake of a low-carbon technology (LCT) within a real local electricity network that is situated in the UK. This network comprises of many households that are assigned to certain feeders. Firstly, travelling wave solutions of Haynes' model are used to predict adoption times as a function of the imitation and innovation influences. Then, the grid that represents the electricity network is created so that the finite element method (FEM) can be implemented. Next, innovation diffusion is modelled with Haynes' equation and the FEM, where varying magnitudes of the internal and external pressures are imposed. Consequently, the impact of these model parameters is investigated. Moreover, LCT adoption trajectories at fixed feeder locations are calculated, which give a macroscopic understanding of the uptake behaviour at specific network sites. Lastly, the adoption of LCTs at a household level is examined, where microscopic and macroscopic approaches are combined.

  2. Electronic monitoring of patient adherence to oral antihypertensive medical treatment: a systematic review.

    Science.gov (United States)

    Christensen, Arne; Osterberg, Lars G; Hansen, Ebba Holme

    2009-08-01

    Poor patient adherence is often the reason for suboptimal blood pressure control. Electronic monitoring is one method of assessing adherence. The aim was to systematically review the literature on electronic monitoring of patient adherence to self-administered oral antihypertensive medications. We searched the Pubmed, Embase, Cinahl and Psychinfo databases and websites of suppliers of electronic monitoring devices. The quality of the studies was assessed according to the quality criteria proposed by Haynes et al. Sixty-two articles were included; three met the criteria proposed by Haynes et al. and nine reported the use of electronic adherence monitoring for feedback interventions. Adherence rates were generally high, whereas average study quality was low with a recent tendency towards improved quality. One study detected investigator fraud based on electronic monitoring data. Use of electronic monitoring of patient adherence according to the quality criteria proposed by Haynes et al. has been rather limited during the past two decades. Electronic monitoring has mainly been used as a measurement tool, but it seems to have the potential to significantly improve blood pressure control as well and should be used more widely.

  3. Mechanical characterization of superalloys for space reactors

    International Nuclear Information System (INIS)

    Duchesne, J.

    1989-01-01

    The purpose of this work is the choice of materials usable between 600 and 900 0 C for nuclear space reactor structures. The main criterion of selection for these materials is their good creep behaviour. Consequently, macroscopic theories of creep and several extrapolation methods were described. Superalloys seem the best materials for the studied range of temperatures. Five of them, base nickel, ones unusual in nuclear industry were selected for their good mechanical properties. Three of them are industrial alloys: the first, HAYNES 230 is a recent one, HASTELLOY S and X are more standard materials. The last two, HASTELLOY XR and PYRAD 38 D are issued from special fabrications. Creep tests metallographic investigations, hardness and tensile tests were performed. A contraction of samples was observed during some creep tests under a low stress, 20MPa at 800 0 C, for HAYNES 230 and HASTELLOY X. This could be due to a structural evolution of these materials connected to a decrease of the cristalline parameter. In addition, correlations were observed between certain characteristics determined from slow tensile tests and short duration creep tests. These correlations present a large interest because, at the present time, creep tests cannot be executed on irradiated materials in our laboratories. Consequently creep behaviour of irradiated materials seem may be deduced. Further studies are needed to explain and confirm the behaviour of the most interesting materials under low stresses: HAYNES 230 and HASTELLOY XR to anticipate their behaviour in working conditions [fr

  4. Environmental variables and tree population structures in deciduous forests of central Brazil with different levels of logging

    Directory of Open Access Journals (Sweden)

    Daniel Luis Mascia Vieira

    2008-04-01

    Full Text Available Population structures of six tree species in three fragments of intact seasonal deciduous forest and three fragments disturbed by logging were studied in the northeastern Goiás. Forty random 400 m² plots were allocated in each fragment to survey plant population structures, number of stumps, cattle feces, burnt logs, and canopy openness. Soil cover by life forms was estimated in 1m² sub-plots. Lianas were abundant in intermediately logged fragments and invasive herbs in the most disturbed fragment. Cattle avoided dense herbaceous strata, such as liana tangles. Cavanillesia arborea, Eugenia dysenterica and Swartzia multijuga trees occurred at very low densities in all the fragments and their seedlings were practically absent, which might endanger their future populations in these fragments. Myracrodruon urundeuva, Tabebuia impetiginosa and Astronium fraxinifolium, the most logged species, had high density of seedlings in all the fragments. However, the highest density of saplings and juvenile individuals occurred in the most disturbed fragment.As estruturas populacionais de seis espécies de árvores foram estudadas em três fragmentos de floresta estacional decidual intactos e três fragmentos impactados pela exploração seletiva de madeira no nordeste goiano. Quarenta parcelas de 400m² foram estabelecidas em cada fragmento para a amostragem de populações, número de tocos, fezes de gado, troncos queimados e abertura de dossel. A cobertura do solo por formas de vida foi estimada em sub-parcelas de 1m². Lianas foram mais abundantes em fragmentos com perturbação intermediária, enquanto herbáceas invasoras no fragmento mais perturbado. Cavanillesia arborea, Eugenia dysenterica e Swartzia multijuga ocorreram em densidades muito baixas em todos os fragmentos e plântulas foram praticamente ausentes, o que pode ameaçar o futuro de suas populações. Myracrodruon urundeuva, Tabebuia impetiginosa e Astronium fraxinifolium, as espécies mais

  5. Crescimento e Nutrição de Angico e Canafístula sob Calagem e Gessagem

    Directory of Open Access Journals (Sweden)

    Giovanno de Vargas

    2017-04-01

    Full Text Available RESUMO O objetivo deste trabalho foi avaliar o efeito da aplicação de calcário e gesso sobre o crescimento e nutrição de leguminosas arbóreas. Os tratamentos consistiram em 5 doses de calcário, 1 de gesso e tratamento testemunha, com 5 repetições cada. Foram utilizadas as espécies angico (Anadanthera colubrina e canafístula (Senna multijuga, sendo o experimento conduzido em casa de vegetação. Foram avaliadas pelo período de 7 meses as variáveis altura e diâmetro, biomassa, composição química das plantas e número e massa seca dos nódulos nas raízes. O calcário aumentou o pH e o teor de Ca2+ e Mg2+ no solo, além de neutralizar o Al. Para o angico, o valor de saturação por bases de 50% promoveu maior crescimento e, para canafístula, foi de 20%. Teores nutricionais nas folhas das duas espécies seguiram ordem de concentração N > Ca > Mg > K > P. Não foram observadas correlações entre crescimento das plantas e teores foliares dos nutrientes.

  6. Materials for Advanced Ultrasupercritical Steam Turbines Task 4: Cast Superalloy Development

    Energy Technology Data Exchange (ETDEWEB)

    Thangirala, Mani

    2015-09-30

    The Steam Turbine critical stationary structural components are high integrity Large Shell and Valve Casing heavy section Castings, containing high temperature steam under high pressures. Hence to support the development of advanced materials technology for use in an AUSC steam turbine capable of operating with steam conditions of 760°C (1400°F) and 35 Mpa (5000 psia), Casting alloy selection and evaluation of mechanical, metallurgical properties and castability with robust manufacturing methods are mandated. Alloy down select from Phase 1 based on producability criteria and creep rupture properties tested by NETL-Albany and ORNL directed the consortium to investigate cast properties of Haynes 282 and Haynes 263. The goals of Task 4 in Phase 2 are to understand a broader range of mechanical properties, the impact of manufacturing variables on those properties. Scale up the size of heats to production levels to facilitate the understanding of the impact of heat and component weight, on metallurgical and mechanical behavior. GE Power & Water Materials and Processes Engineering for the Phase 2, Task 4.0 Castings work, systematically designed and executed casting material property evaluation, multiple test programs. Starting from 15 lbs. cylinder castings to world’s first 17,000 lbs. poured weight, heavy section large steam turbine partial valve Haynes 282 super alloy casting. This has demonstrated scalability of the material for steam Turbine applications. Activities under Task 4.0, Investigated and characterized various mechanical properties of Cast Haynes 282 and Cast Nimonic 263. The development stages involved were: 1) Small Cast Evaluation: 4 inch diam. Haynes 282 and Nimonic 263 Cylinders. This provided effects of liquidus super heat range and first baseline mechanical data on cast versions of conventional vacuum re-melted and forged Ni based super alloys. 2) Step block castings of 300 lbs. and 600 lbs. Haynes 282 from 2 foundry heats were evaluated which

  7. An Ecological Comparison of Floristic Composition in Seasonal Semideciduous Forest in Southeast Brazil: Implications for Conservation

    Directory of Open Access Journals (Sweden)

    Sérgio de Faria Lopes

    2012-01-01

    Full Text Available We examined floristic patterns of ten seasonal semideciduous forest sites in southeastern Brazil and conducted a central sampling of one hectare for each site, where we took samples and identified all individual living trees with DBH (diameter at breast height, 1.30 m ≥4.8 cm. Arboreal flora totaled 242 species, 163 genera, and 58 families. Fabaceae (38 species and Myrtaceae (20 species were families with the largest number of species. Only Copaifera langsdorffii and Hymenaea courbaril occurred at all sites. Multivariate analysis (detrended correspondence analysis and cluster analysis using two-way indicator species analysis (TWINSPAN indicated the formation of a group containing seven fragments in which Siparuna guianensis was the indicator species. This analysis revealed that similarities between studied fragments were due mainly to the successional stage of the community.

  8. Study of fossil wood from the Middle-Late Miocene sediments of Dhemaji and Lakhimpur districts of Assam, India and its palaeoecological and palaeophytogeographical implications

    Science.gov (United States)

    Mehrotra, R. C.; Bera, S. K.; Basumatary, S. K.; Srivastava, G.

    2011-08-01

    In order to reconstruct the palaeoclimate, a number of fossil wood pieces were collected and investigated from two new fossil localities situated in the Dhemaji and Lakhimpur districts of Assam. They belong to the Tipam Group considered to be of Middle-Late Miocene in age and show affinities with Gluta (Anacardiaceae), Bischofia (Euphorbiaceae), Bauhinia, Cynometra, Copaifera-Detarium-Sindora, Millettia-Pongamia, and Afzelia-Intsia (Fabaceae). The flora also records a new species of Bauhinia named Bauhinia miocenica sp. nov. The assemblage indicates a warm and humid climate in the region during the deposition of the sediments. The occurrence of some southeast Asian elements in the fossil flora indicates that an exchange of floral elements took place between India and southeast Asia during the Miocene.

  9. Experiencias dendroclimáticas con árboles de ecosistemas contrastantes de Colombia

    Directory of Open Access Journals (Sweden)

    Jorge Ignacio del Valle

    2012-01-01

    Full Text Available Este trabajo presenta los resultados de diferentes investigaciones dendroclimáticas realizadas en tres ecosistemas contrastantes de Colombia. Se emplearon técnicas dendrocronológicas y densitogramas computarizados para obtener las cronologías de crecimiento y densidad, respectivamente. Se encontraron asociaciones significativas entre las cronologías, las variables climáticas locales y el ENSO, por ejemplo: la densidad de los anillos de crecimiento de Rhizophora mangle con la precipitación; el ancho de los anillos de crecimiento de Parkinsonia praecox y Capparis odoratissima con la precipitación, la temperatura del aire y la temperatura superficial del mar, y el ancho de los anillos de crecimiento de Prioria copaifera con las alturas limnimétricas del río Atrato. Dichos resultados demuestran la aplicabilidad y el potencial de la dendroclimatología en regiones tropicales.

  10. Experiencias dendroclimáticas con árboles de ecosistemas contrastantes de Colombia

    Directory of Open Access Journals (Sweden)

    Herrera David Andrés

    2012-12-01

    Full Text Available Este trabajo presenta los resultados de diferentes investigaciones dendroclimaticas realizadas en tres ecosistemas contrastantes de Colombia. Se emplearon técnicas dendrocronologicas y densitogramas computarizados para obtener las cronologías de crecimiento y densidad, respectivamente. Se encontraron asociaciones significativas entre las cronologías, las variables climáticas locales y el ENSO, por ejemplo: la densidad de los anillos de crecimiento de Rhizophora mangle con la precipitación; el ancho de los anillos de crecimiento de Parkinsonia praecox y Capparis odoratissima con la precipitación, la temperatura del aire y la temperatura superficial del mar, y el ancho de los anillos de crecimiento de Prioria copaifera con las alturas limnimetricas del rio Atrato. Dichos resultados demuestran la aplicabilidad y el potencial de la dendroclimatologia en regiones tropicales.

  11. Structure of a tropical island forest area directly affected by the hydroelectric power station of Pilar, Guaraciaba County, Minas Gerais; Estrutura de uma floresta estacional semidecidual insular em area diretamente afetada pela Usina Hidreletrica de Pilar, Guaraciaba, Zona da Mata de Minas Gerais

    Energy Technology Data Exchange (ETDEWEB)

    Meira-Neto, Joao Augusto Alves; Silva, Alexandre Francisco da [Vicosa Univ., MG (Brazil). Dept. de Biologia Vegetal; Souza, Agostinho Lopes de [Vicosa Univ., MG (Brazil). Dept. de Engenharia Florestal; Paula, Alessandro de [Vicosa Univ., MG (Brazil). Curso de Pos-Graduacao em Botanica

    1998-12-31

    Electrical energy consumption in Brazil is increasing and new hydroelectric power stations are required. This work was carried out at a semi deciduous tropical island forest in Guaraciaba, MG to look for composition peculiarities and to provide a structural model which could be applied to reduce environmental damages caused by Pilar HPS. The point-centered quarter method was applied totalizing 50 sample units. Fifty five species were sampled and a Shannon diversity index (H) of 3.429 nats/individual found. The most important species were longiracemosus, Tapirira guianensis, Pera glabrata, Copaifera langsdorffii, Callophyllum brasiliensis and Guapira opposita. The Guaraciaba island forest presented the peculiarity of Podocarpus sellowii occurrence sellowii occurrence, a rare gymnosperm species that does not occur at nearby forests. The Guaraciaba island forest is probably representative of an original alluvial forest at Piranga valley. (author) 14 refs., 1 fig., 1 tab.

  12. Hydrocarbons from plants: Analytical methods and observations

    Energy Technology Data Exchange (ETDEWEB)

    Calvin, Melvin

    1980-11-01

    We have suggested that certain plants rich in hydrocarbon-like materials might be cultivated for renewable photosynthetic products. Two species were selected for experimental plantations: Euphorbia lathyris, an annual from seed and Euphorbia tirucalli, a perennial from cuttings, The yield from each species is over 10 barrels of oil/acre/year without genetic or agronomic improvement. In addition to plants, there are trees, such as species of Copaifera in Brazil and other tropical areas, which produce a diesel-like oil upon tapping. Each tree produces approximately 40 liters of hydrocarbon per year, and this material can be used directly by a diesel-powered car. Further efforts to develop plants as alternate energy sources are underway, as well as a continuing search for additional plant species throughout the world which have a similar capability.

  13. Characterization of a Semideciduous Forest in Varginha, MG. and comparison with remaining forest fragments in the region

    Directory of Open Access Journals (Sweden)

    Rafaela Pereira Naves

    2012-09-01

    Full Text Available A floristic and phytossociological survey was made at the biggest area of continue forest at Parque Florestal Municipal São Francisco de Assis, in Varginha county, south of Minas Gerais state. The area has 10 ha and possesses a water stream. It was sampled 25 plots of 20m x 20m and recorded all the individuals with diameter at breast height (DBH equal to or larger than 5 cm. The phytossociological survey recorded 1568 individuals, and basal area of 23.65 m².ha-¹ distributed in 103 species, 72 genera and 42 families. The floristic survey recorded 111 species, 77 genera and 43families. The families with bigger number of species were: Myrtaceae, Fabaceae and Melastomataceae and the most important species were Casearia arborea, Copaifera langsdorffii, Tachigali rugosa and Myrcia splendens. The obtained results are in accordance wih the expected ones for the semideciduous seasonal forests of the region.

  14. Experiencias dendroclimáticas con árboles de ecosistemas contrastantes de Colombia

    Directory of Open Access Journals (Sweden)

    Jorge Ignacio del Valle

    2012-07-01

    Full Text Available Este trabajo presenta los resultados de diferentes investigaciones dendroclimaticas realizadas en tres ecosistemas contrastantes de Colombia. Se emplearon técnicas dendrocronologicas y densitogramas computarizados para obtener las cronologías de crecimiento y densidad, respectivamente. Se encontraron asociaciones significativas entre las cronologías, las variables climáticas locales y el ENSO, por ejemplo: la densidad de los anillos de crecimiento de Rhizophora mangle con la precipitación; el ancho de los anillos de crecimiento de Parkinsonia praecox y Capparis odoratissima con la precipitación, la temperatura del aire y la temperatura superficial del mar, y el ancho de los anillos de crecimiento de Prioria copaifera con las alturas limnimetricas del rio Atrato. Dichos resultados demuestran la aplicabilidad y el potencial de la dendroclimatologia en regiones tropicales.

  15. Design and characterization of copaiba oil/alginate films for wound dressings application: Effect of copaiba oil concentration on the film properties

    International Nuclear Information System (INIS)

    Martins, Aryane Christine Neves; Silva, Classius Ferreira da

    2016-01-01

    Full text: Polymeric films have been used as wound dressings for burns and wounds. The healing, anti-inflammatory and antibiotic properties of these films can be induced or potentiated by the incorporation of bioactive like herbal medicines. In this work, alginate films were produced incorporating copaiba oil (Copaifera L.) which has the properties as mentioned above. The casting technique was used to prepare the copaiba oil/alginate films. The copaiba oil was previously emulsified in an alginate solution, and the emulsion was cast in a Petri dish before slow drying. The copaiba oil concentration was evaluated. The films were characterized according to the permeability to water vapor, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, and mechanical properties. The emulsified films showed appropriate properties for use as wound dressings. The main effect on the properties occurred in the highest concentration of copaiba oil. (author)

  16. Design and characterization of copaiba oil/alginate films for wound dressings application: Effect of copaiba oil concentration on the film properties

    Energy Technology Data Exchange (ETDEWEB)

    Martins, Aryane Christine Neves; Silva, Classius Ferreira da, E-mail: aryanemartins_@hotmail.com [Universidade Federal de Sao Paulo (UNIFESP), Diadema, SP (Brazil)

    2016-07-01

    Full text: Polymeric films have been used as wound dressings for burns and wounds. The healing, anti-inflammatory and antibiotic properties of these films can be induced or potentiated by the incorporation of bioactive like herbal medicines. In this work, alginate films were produced incorporating copaiba oil (Copaifera L.) which has the properties as mentioned above. The casting technique was used to prepare the copaiba oil/alginate films. The copaiba oil was previously emulsified in an alginate solution, and the emulsion was cast in a Petri dish before slow drying. The copaiba oil concentration was evaluated. The films were characterized according to the permeability to water vapor, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, and mechanical properties. The emulsified films showed appropriate properties for use as wound dressings. The main effect on the properties occurred in the highest concentration of copaiba oil. (author)

  17. Microstructural Evolution and Creep-Rupture Behavior of A-USC Alloy Fusion Welds

    Science.gov (United States)

    Bechetti, Daniel H.; DuPont, John N.; Siefert, John A.; Shingledecker, John P.

    2016-09-01

    Characterization of the microstructural evolution of fusion welds in alloys slated for use in advanced ultrasupercritical (A-USC) boilers during creep has been performed. Creep-rupture specimens involving INCONEL® 740, NIMONIC® 263 (INCONEL and NIMONIC are registered trademarks of Special Metals Corporation), and Haynes® 282® (Haynes and 282 are registered trademarks of Haynes International) have been analyzed via light optical microscopy, scanning electron microscopy, X-ray diffraction, and thermodynamic and kinetic modeling. Focus has been given to the microstructures that develop along the grain boundaries in these alloys during creep at temperatures relevant to the A-USC process cycle, and particular attention has been paid to any evidence of the formation of local γ'-denuded or γ'-free zones. This work has been performed in an effort to understand the microstructural changes that lead to a weld strength reduction factor (WSRF) in these alloys as compared to solution annealed and aged alloy 740 base metal. γ' precipitate-free zones have been identified in alloy 740 base metal, solution annealed alloy 740 weld metal, and alloy 263 weld metal after creep. Their development during long-term thermal exposure is correlated with the stabilization of phases that are rich in γ'-forming elements ( e.g., η and G) and is suppressed by precipitation of phases that do not contain the γ' formers ( e.g., M23C6 and μ). The location of failure and creep performance in terms of rupture life and WSRF for each welded joint is presented and discussed.

  18. Modeling the Effects of Onsite Wastewater Treatment Systems on Nitrate Loads Using SWAT in an Urban Watershed of Metropolitan Atlanta.

    Science.gov (United States)

    Hoghooghi, Nahal; Radcliffe, David E; Habteselassie, Mussie Y; Jeong, Jaehak

    2017-05-01

    Onsite wastewater treatment systems (OWTSs) can be a source of nitrogen (N) pollution in both surface and ground waters. In metropolitan Atlanta, GA, >26% of homes are on OWTSs. In a previous article, we used the Soil Water Assessment Tool to model the effect of OWTSs on stream flow in the Big Haynes Creek Watershed in metropolitan Atlanta. The objective of this study was to estimate the effect of OWTSs, including failing systems, on nitrate as N (NO-N) load in the same watershed. Big Haynes Creek has a drainage area of 44 km with mainly urban land use (67%), and most of the homes use OWTSs. A USGS gauge station where stream flow was measured daily and NO-N concentrations were measured monthly was used as the outlet. The model was simulated for 12 yr. Overall, the model showed satisfactory daily stream flow and NO-N loads with Nash-Sutcliffe coefficients of 0.62 and 0.58 for the calibration period and 0.67 and 0.33 for the validation period at the outlet of the Big Haynes Watershed. Onsite wastewater treatment systems caused an average increase in NO-N load of 23% at the watershed scale and 29% at the outlet of a subbasin with the highest density of OWTSs. Failing OWTSs were estimated to be 1% of the total systems and did not have a large impact on stream flow or NO-N load. The NO-N load was 74% of the total N load in the watershed, indicating the important effect of OWTSs on stream loads in this urban watershed. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

  19. Joining of ceramic Ba0.5Sr0.5Co0.8Fe0.2O3 membranes for oxygen production to high temperature alloys

    DEFF Research Database (Denmark)

    Kiebach, Wolff-Ragnar; Engelbrecht, Kurt; Kwok, Kawai

    2016-01-01

    /reactivity and their thermal expansion coefficient on the stability of the final joint was evaluated. Leak tight assemblies were obtained only for steels with a thermal expansion coefficient of > 16 [10(-6) K-1] and protective coating. Proof-of-concept oxygen flux measurements up to 830 degrees C were performed......The possibility of joining dense ceramic BCSF tubular membranes to metal alloys using a silver braze was investigated. Four different alloys (Crofer 22 APU (R), Kanthal APM (R), Haynes 214 (R) and EN 1.4841) were considered and the influence of their oxide scale stability...

  20. Safety/security interface assessments at commercial nuclear power plants

    International Nuclear Information System (INIS)

    Byers, K.R.; Brown, P.J.; Norderhaug, L.R.

    1985-01-01

    The findings of the Haynes Task Force Committee (NUREG-0992) are used as the basis for defining safety/security assessment team activities at commercial nuclear power plants in NRC Region V. A safety/security interface assessment outline and the approach used for making the assessments are presented along with the composition of team members. As a result of observing simulated plant emergency conditions during scheduled emergency preparedness exercises, examining security and operational response procedures, and interviewing plant personnel, the team has identified instances where safety/security conflicts can occur

  1. Proceedings of the Workshop on Meteorological and Environmental Inputs to Aviation Systems (6th) Held at the University of Tennessee Space Institute on 26-28 October 1982,

    Science.gov (United States)

    1983-04-01

    20. Tom Greer 60. Robert Bonner 100. Frank Van Demark 21. John Klehr 61. Tommy Trimble 101. Art Hansen 22. Terrell Wilson 62. Wen Painter 102, Ossi...information provided to him. ARF is planned as an enhancement to the auto- matic flight service station program. The FOLLOW-UP RESPONSE: Terrell ...204 1975). FS 409 (June 1g8l). (8 409ns (June "D o o(21) "Aircraft Wake Vortices: A State-of-the- (8) Haynes, Ann , "Description of a Program Art

  2. Safety/security interface assessments at commercial nuclear power plants

    International Nuclear Information System (INIS)

    Byers, K.R.; Brown, P.J.; Norderhaug, L.R.

    1985-07-01

    The findings of the Haynes Task Force Committee (NUREG-0992) are used as the basis for defining safety/security assessment team activities at commercial nuclear power plants in NRC Region V. A safety/security interface assessment outline and the approach used for making the assessments are presented along with the composition of team members. As a result of observing simulated plant emergency conditions during scheduled emergency preparedness exercises, examining security and operational response procedures, and interviewing plant personnel, the team has identified instances where safety/security conflicts can occur. 2 refs

  3. First record of Bruchidius raddianae in Italy: infested seeds of Vachellia karroo from Lampedusa island (Coleoptera: Bruchidae; Fabales: Fabaceae

    Directory of Open Access Journals (Sweden)

    Luciano Toma

    2017-06-01

    Full Text Available Bruchidius raddianae (Anton & Delobel 2003, a species of seed beetle spread in Northern Africa, was detected for the first time in Europe in some localities of the Southern Iberian Peninsula in 2007. In Spain this coleopteran lives on the shrubs of the South African acacia tree, Vachellia karroo (Hayne Banfi & Galasso, currently present in the Southern Iberian Peninsula. From seeds of V. karroo collected in October 2015, in Lampedusa island, Italy, where this plant is widely spread, 45 specimens of this coleopteran emerged. This observation represents the first record of B. raddianae in Italy and the second one for Europe.

  4. A quantitative comparison of moldic and vuggy porosity structure in karst aquifers using image and geospatial analysis

    Science.gov (United States)

    Culpepper, A. R.; Manda, A. K.

    2011-12-01

    Limestone aquifers are vital sources of groundwater for domestic and industrial use throughout the world. To sustain rising population throughout the southeastern United States, aquifers are increasingly exploited to provide the populace clean and reliable water resources. The moldic Castle Hayne and the vuggy Biscayne aquifer systems are two highly productive aquifers that provide critical water resources to millions of citizens in eastern North Carolina and southeastern Florida, respectively. In order to better understand karst aquifers and evaluate the potential for contaminant transport, detailed investigation of 2D porosity and pore geometry using image and geospatial analysis were undertaken. The objective of this study is to compare and contrast the porosity structure of moldic and vuggy karst aquifers by quantifying 2D porosity and pore geometry from images of slabbed core samples and optical televiewer images. Televiewer images and images of painted core samples from the Spring Garden Member of the Castle Hayne aquifer and Miami Limestone Formation of the Biscayne aquifer were acquired for analysis of porosity structure. The procedure for converting images of slabbed core and televiewer images to a GIS useable format consisted of rectification, calibration, image enhancement, classification, recoding and filtering. In GIS, raster or vector formats were used to assess pore attributes (e.g., area and perimeter) and structure. Preliminary results show that both pore area and perimeter for the Spring Garden Member of the Castle Hayne and Miami Limestone Formation of the Biscayne aquifers can be described by exponential distributions. In both sets of slabbed core images the relatively small pores have the highest occurrence, whereas larger pores occur less frequently. However, the moldic Spring Garden Member of the Castle Hayne aquifer has larger pore sizes derived from cores images than the vuggy Miami Limestone Formation of Biscayne aquifer. Total porosity

  5. CHEMTAX-derived phytoplankton community structure associated with temperature fronts in the northeastern Arabian Sea..

    Digital Repository Service at National Institute of Oceanography (India)

    Roy, R; Chitari, R; Kulkarni, V.; Krishna, M.S.; Sarma, V.V.S.S.; Anil, A.C.

    and northern Arabian Sea. Deep-Sea Res. I 34, 713-723. Barlow, R., Kyewalyanga, M., Sessions, H., Van den Berg, M., Morris, T., 2008. Phytoplankton pigments, functional types, and absorption properties in the Delagoa and Natal Bights of the Agulhas... for Prochlorococcus sp. in low-light suboxic environments in the Arabian Sea and the Eastern Tropical North Pacific. Deep-Sea Res. I. 47, 1183-1205. Grasshoff, K., Erhardt, M., Kremiling, K., 1983. Methods of seawater analysis, Verlag Chemie. 419 Haynes, R...

  6. Novel Electromagnetic - Ultrasound Synergistic Technique for Treatment of Cancer

    Science.gov (United States)

    2013-11-01

    6 APPENDICES……….…………………………………………………….…. 8 Partnering PI Final Progress Report: DOD Award BC095397P1 Initiating PI: Mahta Moghaddam...and Volume Integral Formulation Mark Haynes, Member, IEEE, sacha a. M. Verweij, Mahta Moghaddam, Fellow, IEEE, and Paul l. carson, Senior Member... Mahta Moghaddam, Fellow, IEEE Abstract—A preclinical prototype of a transcutaneous thermal therapy system has been developed for the targeted treatment

  7. Genital piercings: what is known and what people with genital piercings tell us.

    Science.gov (United States)

    Armstrong, Myrna L; Caliendo, Carol; Roberts, Alden E

    2006-06-01

    General and subjective information about those who chose to obtain genital piercings was presented. Particularly, the assumptions made from the literature are refuted by objective and subjective data collected from intimately pierced individuals themselves. Professional nurses must not base practice decisions on assumptions but on the "best evidence with clinical experience, research, (as well as) associated patient values" (Sackett, Strauss, Richardson, Rosenberg, & Haynes, 2001, p. 10). Thus, providing clinically competent care is driven by the latest knowledge and evidence from research and patient sources. Data found here provide further empirical evidence that may help to improve client outcomes by advancing evidence-based nursing practice in relation to people with genital piercings.

  8. A sulfidation-resistant nickel-base alloy

    International Nuclear Information System (INIS)

    Lai, G.Y.

    1989-01-01

    For applications in mildly to moderately sulfidizing environments, stainless steels, Fe-Ni-Cr alloys (e.g., alloys 800 and 330), and more recently Fe-Ni-Cr-Co alloys (e.g., alloy 556) are frequently used for construction of process equipment. However, for many highly sulfidizing environments, few existing commercial alloys have adequate performance. Thus, a new nickel-based alloy containing 27 wt.% Co, 28 wt.% Cr, 4 wt.% Fe, 2.75 wt.% Si, 0.5 wt.% Mn and 0.05 wt.% C (Haynes alloy HR-160) was developed

  9. Pesquisa de antifúngicos de origem vegetal

    OpenAIRE

    Domingos, Telma

    2009-01-01

    Dissertação mest., Engenharia Biológica, Universidade do Algarve, 2009 Este trabalho foi realizado com o objectivo de avaliar in vitro as propriedades antifúngicas de vários extractos de Drosophyllum lusitanicum Link. e Drosera intermedia Hayne. A actividade antifúngica foi avaliada em várias espécies de fungos filamentosos (Aspergillus niger, Aspergillus flavus, Aspergillus fumigatus, Aspergillus parasiticus e Penicillium expansum) e leveduras de alteração alimentar (Debaryomyces hansenii...

  10. Interrogation of Detainees: Overview of the McCain Amendment

    Science.gov (United States)

    2006-10-23

    shocks in one circumstance might not be considered so egregious in another); Miller v. City of Philadelphia, 174 F. 3d 368, 375 (3rd Cir.1999) (“The...concurring). 15 Hope v. Pelzer, 536 U.S. 730 (2002). 16 Chandler v. Crosby, 379 F. 3d 1278 (11th Cir. 2004). 17 Haynes v. Washington, 373 U.S. 503 (1963...and that taken by S. 3861, S. 3886, and H.R. 6054. Kate Zernike & Sheryl Gay Stolberg, Differences Settled in Deal Over Detainee Treatment, NY

  11. Case Studies on the Effectiveness of State Financial Incentives for Renewable Energy

    Energy Technology Data Exchange (ETDEWEB)

    None

    2002-09-01

    September 2002 · NREL/SR-620-32819 Case Studies on the Effectiveness of State Financial Incentives for Renewable Energy S. Gouchoe, V. Everette, and R. Haynes North Carolina State University Raleigh, North Carolina National Renewable Energy Laboratory 1617 Cole Boulevard Golden, Colorado 80401-3393 NREL is a U.S. Department of Energy Laboratory Operated by Midwest Research Institute · Battelle · Bechtel Contract No. DE-AC36-99-GO10337 September 2002 · NREL/SR-620-32819Case Studies on the Effecti

  12. Efeito de Glomus etunicatum e fósforo no crescimento inicial de espécies arbóreas em semeadura direta Effects of Glomus etunicatum and phosphorus on initial growth of woody species at direct seeding

    Directory of Open Access Journals (Sweden)

    Waldo Wilfredo Flores-Aylas

    2003-02-01

    Full Text Available O objetivo deste trabalho foi avaliar os efeitos da disponibilidade de P no solo, da micorriza formada por Glomus etunicatum e de Mycoform, um estimulante desta última, no crescimento e competição inicial de seis espécies arbóreas semeadas diretamente. O trabalho foi realizado em casa de vegetação com as espécies Senna macranthera (fedegoso, Guazuma ulmifolia (mutamba, Senna multijuga (cássia-verrugosa, Solanum granuloso-leprosum (gravitinga, Schinus terebenthifolius (aroeira e Trema micrantha (trema, em solo com níveis de P na solução considerados muito baixo, baixo e alto, com inoculação ou não do fungo micorrízico arbuscular G. etunicatum, além do tratamento G. etunicatum + Mycoform. O crescimento das mudas respondeu à inoculação em P muito baixo e baixo. As mudas apresentaram moderada dependência das micorrizas, não respondendo ao G. etunicatum em P alto. Gravitinga morreu em P muito baixo, mas foi dominante com P baixo e alto. Fedegoso foi dominante com P muito baixo, mostrando-se adaptado à baixa fertilidade. G. etunicatum influenciou a dominância das espécies, auxiliando as menos competitivas e gerando maior equilíbrio. Mycoform influenciou pouco o crescimento, nutrição e competição. O crescimento de espécies pioneiras semeadas diretamente é favorecido pela elevação do P e pelas micorrizas, as quais também favorecem o equilíbrio entre espécies.The objective of this work was to evaluate the effects of soil P availability, mycorrhiza and a mycorrhiza stimulatory product (Mycoform upon growth and initial competition of six sown woody species, in the greenhouse. The species Senna macranthera, Guazuma ulmifolia, Senna multijuga, Solanum granuloso-leprosum, Schinus terebenthifolius and Trema micrantha were sown together in a soil with very low, low and high levels of P in soil solution combined with inoculation treatments of the arbuscular mycorrhizal fungus Glomus etunicatum, G. etunicatum + Mycoform and a

  13. Materials Performance in USC Steam

    Energy Technology Data Exchange (ETDEWEB)

    G. R. Holcomb, P. Wang, P. D. Jablonski, and J. A. Hawk

    2010-05-01

    The proposed steam inlet temperature in the Advanced Ultra Supercritical (A-USC) steam turbine is high enough (760 °C) that traditional turbine casing and valve body materials such as ferritic/martensitic steels will not suffice due to temperature limitations of this class of materials. Cast versions of several traditionally wrought Ni-based superalloys were evaluated for use as casing or valve components for the next generation of industrial steam turbines. The full size castings are substantial: 2-5,000 kg each half and on the order of 100 cm thick. Experimental castings were quite a bit smaller, but section size was retained and cooling rate controlled to produce equivalent microstructures. A multi-step homogenization heat treatment was developed to better deploy the alloy constituents. The most successful of these cast alloys in terms of creep strength (Haynes 263, Haynes 282, and Nimonic 105) were subsequently evaluated by characterizing their microstructure as well as their steam oxidation resistance (at 760 and 800 °C).

  14. Cast Alloys for Advanced Ultra Supercritical Steam Turbines

    Energy Technology Data Exchange (ETDEWEB)

    G. R. Holcomb, P. Wang, P. D. Jablonski, and J. A. Hawk,

    2010-05-01

    The proposed steam inlet temperature in the Advanced Ultra Supercritical (A-USC) steam turbine is high enough (760 °C) that traditional turbine casing and valve body materials such as ferritic/martensitic steels will not suffice due to temperature limitations of this class of materials. Cast versions of several traditionally wrought Ni-based superalloys were evaluated for use as casing or valve components for the next generation of industrial steam turbines. The full size castings are substantial: 2-5,000 kg each half and on the order of 100 cm thick. Experimental castings were quite a bit smaller, but section size was retained and cooling rate controlled to produce equivalent microstructures. A multi-step homogenization heat treatment was developed to better deploy the alloy constituents. The most successful of these cast alloys in terms of creep strength (Haynes 263, Haynes 282, and Nimonic 105) were subsequently evaluated by characterizing their microstructure as well as their steam oxidation resistance (at 760 and 800 °C).

  15. Corrosion of high Ni-Cr alloys and Type 304L stainless steel in HNO3-HF

    International Nuclear Information System (INIS)

    Ondrejcin, R.S.; McLaughlin, B.D.

    1980-04-01

    Nineteen alloys were evaluated as possible materials of construction for steam heating coils, the dissolver vessel, and the off-gas system of proposed facilities to process thorium and uranium fuels. Commercially available alloys were found that are satisfactory for all applications. With thorium fuel, which requires HNO 3 -HF for dissolution, the best alloy for service at 130 0 C when complexing agents for fluoride are used is Inconel 690; with no complexing agents at 130 0 C, Inconel 671 is best. At 95 0 C, six other alloys tested would be adequate: Haynes 25, Ferralium, Inconel 625, Type 304L stainless steel, Incoloy 825, and Haynes 20 (in order of decreasing preference); based on composition, six untested alloys would also be adequate. The ions most effective in reducing fluoride corrosion were the complexing agents Zr 4+ and Th 4+ ; Al 3+ was less effective. With uranium fuel, modestly priced Type 304L stainless steel is adequate. Corrosion will be most severe in HNO 3 -HF used occasionally for flushing and in solutions of HNO 3 and corrosion products (ferric and dichromate ions). HF corrosion can be minimized by complexing the fluoride ion and by passivation of the steel with strong nitric acid. Corrosion caused by corrosion products can be minimized by operating at lower temperatures

  16. Associação micorízica em espécies arbóreas, atividade microbiana e fertilidade do solo em áreas degradadas de cerrado

    Directory of Open Access Journals (Sweden)

    Márcia Helena Scabora

    2011-01-01

    growth, where 50 mL of preserved cerrado soil was applied as inoculum of microorganisms. Seedlings of 11 tree species were planted: Anadenanthera falcata (Benth. Speg ('angico-preto', Acacia polyphylla D.C. ('monjoleiro', Stryphnodendron adstringens (Mart. Coville ('barbatimão', Dimorphandra mollis Benth ('faveiro', Hymenaea stigonocarpa Mart. ex Hayne ('jatobá-de-cerrado', Dipteryx alata Vog. ('baru', Machaerium acutifolium Vogel ('jacarandá- do-campo', Schinus terebinthifolia Raddi ('aroeirapimenteira', Magonia pubescens St. Hil. ('tingui', Lafoensia pacari St. Hil. ('dedaleira' and Tabebuia aurea (Manso Benth. & Hook ('ipê-amarelo'. Twelve months later, root samples were colleted at the depth of 0-0.10 m and used for evaluations. The subsoil, as compared to pasture soil, was poor in organic matter and presented less microbial activity. The highest mycorrhizal colonization was seen in the species Acacia polyphylla D.C. (monjoleiro, Magonia pubescens St. Hil. (tingui, Hymenaea stigonocarpa Mart. ex Hayne (jatobá-de-cerrado and Schinus terebinthifolia Raddi (aroeira-pimenteira. These species could be indicated in revegetation projects in 'cerrado' degraded areas. Plants from both areas showed seedlings form high mycorrhizal colonization and low numbers of spores.

  17. High temperature corrosion of nickel alloys by molten calcium chloride in an oxidising environment

    International Nuclear Information System (INIS)

    Barnett, Roger; Gittos, Mike

    2012-09-01

    A series of nickel alloys was submerged in molten calcium chloride (a molten salt proposed for and used in the nuclear industry for a variety of applications), at 850 deg. C for 72 hours under an oxidising environment. The samples were analysed in detail, in order to determine their corrosion behaviour and suitability for use under these conditions. 310 stainless steel was used as a reference material. Extensive corrosion occurred and the observed attack on the metal substrates was general and massive with corrosion rates ranging from 1.17 mm/year, for Haynes 214, to 13.3 mm/year, for 310 stainless steel. All materials showed selective leaching of chromium from the samples but the oxide layer formed was not protective, spalling away easily. The severity of the attack was not immediately visible from the corrosion rate alone: samples showed a friable scale on the surface and deep penetration of the attack beneath, up to 0.63 mm for 310 stainless steel. In some cases, the attack was clearly intergranular with chromium being depleted along the grain boundaries, whereas in others, the attack was more general. No simple correlation between alloying elements and corrosion rate was apparent, with additions of aluminium and silicon appearing to have little or no protective effect. Alloys 600 and Haynes HR-160 showed promise, with relatively low corrosion rates and penetration depths. (authors)

  18. Thermomechanical behavior of different Ni-base superalloys during cyclic loading at elevated temperatures

    Directory of Open Access Journals (Sweden)

    Huber Daniel

    2014-01-01

    Full Text Available The material behavior of three Ni-base superalloys (Inconel® 718, Allvac® 718PlusTM and Haynes® 282® during in-phase cyclic mechanical and thermal loading was investigated. Stress controlled thermo-mechanical tests were carried out at temperatures above 700 ∘C and different levels of maximum compressive stress using a Gleeble® 3800 testing system. Microstructure investigations via light optical microscopy (LOM and field emission gun scanning electron microscopy (FEG-SEM as well as numerical precipitation kinetics simulations were performed to interpret the obtained results. For all alloys, the predominant deformation mechanism during deformation up to low plastic strains was identified as dislocation creep. The main softening mechanism causing progressive increase of plastic strain after preceding linear behavior is suggested to be recrystallization facilitated by coarsening of grain boundary precipitates. Furthermore, coarsening and partial transformation of strengthening phases was observed. At all stress levels, Haynes® 282® showed best performance which is attributable to its stable microstructure containing a high phase fraction of small, intermetallic precipitates inside grains and different carbides evenly distributed along grain boundaries.

  19. ORGANIC CARBON AND TOTAL NITROGEN IN THE DENSIMETRIC FRACTIONS OF ORGANIC MATTER UNDER DIFFERENT SOIL MANAGEMEN

    Directory of Open Access Journals (Sweden)

    MARCELO RIBEIRO VILELA PRADO

    2016-01-01

    Full Text Available The evaluation of land use and management by the measurement of soil organic matter and its fractions has gained attention since it helps in the understanding of the dynamics of their contribution to soil productivity, especially in tropical environments. This study was conducted in the municipality of Colorado do Oeste, state of Rondônia, Brazil and its aim was to determinethe quantity of organic carbon and total nitrogen in the light and heavy fractions of organic matter in the surface layers of a typic hapludalf under different land use systems: Native Forest: open evergreen forest, reference environment; Agroforestry System 1: teak (Tectona grandis LF and kudzu (Pueraria montana; Agroforestry System 2: coffee (Coffea canephora, marandu palisade grass (Brachiaria brizantha cv. Marandu, “pinho cuiabano” (Parkia multijuga, teak and kudzu.; Agroforestry System 3: teak and cocoa (Theobroma cacao; Silvopasture System: teak, cocoa and marandu palisade grass; and Extensive Grazing System: marandu palisade grass. The experimental design was a randomized block in split-split plots (use systems versus soil layers of 0-0.05 and 0.05-0.10 m with three replications. The results showed that relative to Native Forest, the Agroforestry System 2 had equal- and greater amounts of organic carbon and total nitrogen respectively (light and heavy fractions in the soil organic matter, with the light fraction being responsible for storage of approximately 45% and 70% of the organic carbon and total nitrogen, respectively. Therefore, the light densimetric fraction proved to be useful in the early identification of the general decline of the soil organic matter in the land use systems evaluated.

  20. Medicinal plant extracts on the control of Diabrotica speciosa (Coleoptera: Chrysomelidae Extratos de plantas medicinais no controle de Diabrotica speciosa (Coleoptera: Chrysomelidae

    Directory of Open Access Journals (Sweden)

    F.S. Barbosa

    2013-01-01

    Full Text Available The aim of this study was to evaluate the insecticidal effect of aqueous, alcoholic, and oil extracts from leaves of eight medicinal plants against Diabrotica speciosa prepared at five concentrations. The extracts that used commercial soybean oil as solvent showed the highest D. speciosa mortality due to the solvent itself, regardless of the used plants and their concentrations. Thus, commercial soybean oil was discarded as solvent since at these volumes it would cause serious phytotoxicity problems. After 24 hours of exposure of the pest to the extracts, the highest D. speciosa mortality values were observed for Copaifera langsdorfii and Chenopodium ambrosioides extracts, both in 5% alcohol, and Artemisia verlotorum, in 10% water. However, in the last mortality assessment (48 h, C. langsdorfii extract in 5% alcohol showed higher mortality of this pest, followed by C. ambrosioides extract in 5% alcohol, compared to the remaining plants.O objetivo deste trabalho foi avaliar o efeito inseticida de extratos aquosos, alcoólicos e oleosos de folhas de oito plantas medicinais contra Diabrotica speciosa preparadas em cinco concentrações. Os extratos que utilizaram óleo de soja comercial como solvente apresentaram as maiores mortalidades de D. speciosa em função do próprio óleo, independentemente das plantas utilizadas em suas concentrações. Sendo assim, o óleo de soja comercial foi descartado como solvente, pois nestes volumes acarretaria sérios problemas de fitotoxidade. Após 24 horas de exposição da praga aos extratos, os maiores valores de mortalidade de D. speciosa foram observados nos extratos de Copaifera Langsdorfii e de Chenopodium ambrosioides, ambos em álcool 5%, e de Artemisia verlotorum, em água 10%. Entretanto, na última avaliação de mortalidade (48 h, o extrato de C. langsdorfii em álcool a 5% apresentou maior mortalidade dessa praga, seguida pelo extrato alcoólico a 5% de C. ambrosioides comparada às demais plantas.

  1. Análise estrutural e considerações sobre a dinâmica sucessional de dois fragmentos florestais semideciduais do Jardim Botânico Municipal de Bauru, SP, Brasil Structural analysis and considerations on the successional dynamic of two semideciduous forest fragments at the Municipal Botanical Garden of Bauru, SP, Brazil

    Directory of Open Access Journals (Sweden)

    Marcelo Henrique Ongaro Pinheiro

    2009-12-01

    Full Text Available Parâmetros fitossociológicos, como freqüência de classes de altura e de diâmetro, são muito utilizados em inferências sobre sucessão secundária em fitocenoses. Indivíduos abustivo-arbóreos com no mínimo 1,5 m de altura e fuste a 1,3 m, foram amostrados em 2.600 m² de floresta estacional semidecidual do Jardim Botânico Municipal de Bauru (JBMB. Informações sobre as freqüências de classes de diâmetro das cinco espécies com maior índice de valor de importância (Ocotea pulchella, Protium heptaphyllum, Copaifera langsdorffii, Platypodium elegans e Trichilia pallida e a classificação sucessional das populações mais numerosas também foram analisadas para inferências sobre as características sucessionais da comunidade estudada. As freqüências de classes de diâmetro de Vochysia tucanorum, espécie típica de savana, também foi estudada. As informações obtidas permitiram considerar que a floresta do JBMB encontra-se em estádio sucessional intermediário, e que, embora tenha sofrido com a ação do fogo no passado, algumas dessas populações estão conseguindo renovar-se.Phytosociological parameters, as the frequency of height and diameter classes, are commonly used to make inferences about secondary succession in given phytocenoses. Shrub and tree individuals higher than 1.5 m and with a bole length of at least 1.3 m were sampled in 2,600 m2 of semideciduous seasonal forest in the Municipal Botanical Garden of Bauru (JBMB. Information on the diameter class frequencies of five species with the highest Importance Value Index (Ocotea pulchella, Protium heptaphyllum, Copaifera langsdorffii, Platypodium elegans and Trichilia pallida and the more numerous species' successional classification were analyzed to make inferences about the successional features of the studied community. The diameter class frequencies of savannic species Vochysia tucanorum were also studied. The information obtained allowed to consider that the

  2. Crescimento e teor de metais de mudas de espécies arbóreas cultivadas em solo contaminado com metais pesados Growth and metal concentration of seedlings of woody species in a heavy metal contaminated soil

    Directory of Open Access Journals (Sweden)

    Teresa Cristina Lara Lanza de Sá e Melo Marques

    2000-01-01

    Full Text Available O objetivo do trabalho foi avaliar o teor de metais pesados e o crescimento de mudas de 20 espécies arbóreas tropicais em solo com elevado grau de contaminação com metais pesados. Em casa de vegetação, as mudas foram transplantadas para vasos contendo 3,3 kg de misturas com diferentes proporções (0, 20, 40 e 60% v/v de solo contaminado. Verificou-se comportamento diferenciado das espécies quanto à inibição de crescimento e aos teores de metais na raiz e na parte aérea em decorrência da contaminação. Com base na produção de matéria seca da parte aérea, concluiu-se que apenas Myrsine umbellata, Cedrella fissilis, Tabebuia impetiginosa e Copaifera langsdorffii não foram afetadas pela contaminação, enquanto Hymenaea courbaril, Mimosa caesalpiniaefolia, Acacia mangium e Platypodium gonoacantha sofreram pequeno impacto. As demais espécies foram muito inibidas pela contaminação do solo, o que é causado pela absorção, na maioria dos casos, de Zn e Cd. Várias espécies apresentaram elevada capacidade de reter esses metais nas raízes, evitando sua translocação para a parte aérea.The objective of the paper was to evaluate metal content and ability to grow in soil with excess of heavy metals of seedlings of 20 woody species. In the greenhouse, seedlings were transplanted to pots with 3.3 kg of soil-mixes with different proportions (0, 20, 40, 60% v/v of a heavy metal contaminated soil. It was found that plant species behaved differently in terms of growth inhibition and metal content in the shoots and roots. Based upon the dry matter yield, only Myrsine umbellata, Cedrella fissilis, Tabebuia impetiginosa and Copaifera langsdorffii were not affected by increasing contamination, whereas Hymenaea courbaril, Mimosa caesalpiniaefolia, Acacia mangium and Platypodium gonoacantha were only slightly affected by it. All the other species were highly inhibited by the excess of metals in the soil, being such effects related, in most

  3. Antileishmanial activity of diterpene acids in copaiba oil

    Directory of Open Access Journals (Sweden)

    Adriana Oliveira dos Santos

    2013-02-01

    Full Text Available Leishmaniasis is a neglected tropical disease. According to the World Health Organization, there are approximately 1.5-two million new cases of cutaneous leishmaniasis each year worldwide. Chemotherapy against leishmaniasis is based on pentavalent antimonials, which were developed more than a century ago. The goals of this study were to investigate the antileishmanial activity of diterpene acids in copaiba oil, as well as some possible targets of their action against Leishmania amazonensis. Methyl copalate and agathic, hydroxycopalic, kaurenoic, pinifolic and polyaltic acids isolated from Copaifera officinales oleoresins were utilised. Ultrastructural changes and the specific organelle targets of diterpenes were investigated with electron microscopy and flow cytometry, respectively. All compounds had some level of activity against L. amazonensis. Hydroxycopalic acid and methyl copalate demonstrated the most activity against promastigotes and had 50% inhibitory concentration (IC50 values of 2.5 and 6.0 µg/mL, respectively. However, pinifolic and kaurenoic acid demonstrated the most activity against axenic amastigote and had IC50 values of 3.5 and 4.0 µg/mL, respectively. Agathic, kaurenoic and pinifolic acid caused significant increases in plasma membrane permeability and mitochondrial membrane depolarisation of the protozoan. In conclusion, copaiba oil and its diterpene acids should be explored for the development of new antileishmanial drugs.

  4. Amazonian plant crude extract screening for activity against multidrug-resistant bacteria.

    Science.gov (United States)

    Correia, A F; Segovia, J F O; Gonçalves, M C A; de Oliveira, V L; Silveira, D; Carvalho, J C T; Kanzaki, L I B

    2008-01-01

    Antimicrobial resistance is a subject of great concern in public health and also in the designing of strategies for current therapeutic protocols all over the world. New drugs, including those necessary for a reserve armamentarium and exhibiting less side effects deserve special attention. In rural areas, particularly in Brazil, a huge number of natural products, in different artisanal preparations, mainly from plants, have been used by traditional populations to cure diseases. Despite some of these plants have been studied, many of them are awaiting to have their compounds chemically characterized and investigated their pharmacodynamics properties. Further, as well known, the environment plays a crucial role in the metabolism of these plants, yielding different and varied molecular complexes depending on the period of collection, climate conditions, kind of soil and also the plant speciation. In this report, ethanol crude extract of 10 different botanical specimens from the Amazon region of Brazil, in the Amapa State, were screened for antibacterial activity of 7 clinical resistant microorganisms utilizing as control ATCC bacterial species by the Kirby-Bauer method. Plant extracts of Geissospermum argenteum, Uncaria guianensis, Brosimum acutifolium, Copaifera reticulate, Licania macrophylla, Ptycopetalum olacoides and Dalbergia subcymosa yielded activity against Staphylococcus aureus and Pseudomonas aeruginosa, both multidrug resistant, and Staphylococcus aureus ATCC strain.

  5. Gas exchange and antioxidant activity in seedlings of C opaifera langsdorffii Desf. under different water conditions.

    Science.gov (United States)

    Rosa, Derek B C J; Scalon, Silvana P Q; Cremon, Thais; Ceccon, Felipe; Dresch, Daiane M

    2017-01-01

    The aim of this study was to evaluate gas exchange, efficiency of the photosynthetic apparatus, and antioxidant activity in Copaifera langsdorffii Desf. The seedlings were cultivated under different conditions of water availability, in order to improve the utilization efficiency of available water resources. The seedlings were cultivated in four different water retention capacities (WRC- 25%, 50%, 75%, and 100%), and evaluated at four different time (T- 30, 60, 90, and 120 days). During the experimental period, seedlings presented the highest values for carboxylation efficiency of Rubisco (A/Ci), intrinsic water use efficiency (IWUE = A/gs), chlorophyll index, and stomatal opening, when grown in the substrate with 75% WRC, but the stomatal index (SI) was less the 25% WRC. The efficiency of photosystem II was not significantly altered by the treatments. Comparison between the extreme treatments in terms of water availability, represented by 25% and 100% WRC, represent stress conditions for the species. Water availability causes a high activity of antioxidant enzymes (superoxide dismutase, peroxidase, and catalase) in the plant.

  6. Gas exchange and antioxidant activity in seedlings of C opaifera langsdorffii Desf. under different water conditions

    Directory of Open Access Journals (Sweden)

    DEREK B.C.J. ROSA

    Full Text Available ABSTRACT The aim of this study was to evaluate gas exchange, efficiency of the photosynthetic apparatus, and antioxidant activity in Copaifera langsdorffii Desf. The seedlings were cultivated under different conditions of water availability, in order to improve the utilization efficiency of available water resources. The seedlings were cultivated in four different water retention capacities (WRC- 25%, 50%, 75%, and 100%, and evaluated at four different time (T- 30, 60, 90, and 120 days. During the experimental period, seedlings presented the highest values for carboxylation efficiency of Rubisco (A/Ci, intrinsic water use efficiency (IWUE = A/gs, chlorophyll index, and stomatal opening, when grown in the substrate with 75% WRC, but the stomatal index (SI was less the 25% WRC. The efficiency of photosystem II was not significantly altered by the treatments. Comparison between the extreme treatments in terms of water availability, represented by 25% and 100% WRC, represent stress conditions for the species. Water availability causes a high activity of antioxidant enzymes (superoxide dismutase, peroxidase, and catalase in the plant.

  7. Xylem anatomy of the Caesalpiniaceae registered in wood collection of the Universidad Distrital Francisco Jose de Caldas

    International Nuclear Information System (INIS)

    Pulido Rodriguez, Esperanza N; Mateus, Durley; Lozano D, Ivan

    2011-01-01

    The anatomical study of the xylem of 21 species of Caesalpiniaceae registered in the wood collection Jos Anatolio Lastra Rivera (JALR), of the Universidad Distrital Francisco Jose de Caldas, included the macroscopic, microscopic and biometric characterization of the cellular elements that constitute the xylematic tissue. These analyses were developed following parameters defined by the International Association Wood Anatomist Committee (IAWA Committee 1989) and methods established by the Wood Technology Laboratory of Universidad Distrital. Measurements and descriptions were used to prepare identification keys and similarity analysis. The wood of Caesalpiniaceae family illustrated common characteristics in growth rings differentiation, porosity, vessel arrangement, deposits, diameter and length, plates perforation type, alternate and vestured intervessel pits; fibers wall thickness and length; paratracheal axial vasicentric parenchyma, aliform and banded parenchyma and presence of prismatic crystals. Also, variations in anatomical features such us longitudinal channels were found as diagnostic for some genera like Copaifera. The variation and analysis of anatomical characteristics of the xylem tissue allowed to verify some taxonomic relations of the family Caesalpiniaceae, like the observed with the species Mora megistosperma, Mora oleofera, Peltogyne pubescens, Peltogyne paniculata, Sclerolobium odoratissimum and Tachigali polyphylla .

  8. Anatomical and morphological modifications in response to flooding by six Cerrado tree species

    Directory of Open Access Journals (Sweden)

    Adilson Serafim de Oliveira

    2015-12-01

    Full Text Available Wetlands are common in the Cerrado (Brazilian savannas biome, however flooding of these wetlands impairs growth and development of most plants. We evaluated flood tolerance of typical Cerrado trees. Seedlings of Aspidosperma macrocarpon (Apocynaceae, Tabebuia rosea (Bignoniaceae, Handroanthus chrysotrichus (Bignoniaceae, Myracrodruon urundeuva (Anacardiaceae, Kielmeyera coriacea (Calophyllaceae and Copaifera langsdorffii (Fabaceae were flooded up to the stem base for 30 days. Stems with cortical cracks, secondary aerenchyma and hypertrophic lenticels were observed in flooded plants of M. urundeuva,H. chrysotrichus and T. rosea while adventitious roots were formed in flooded plants of T. rosea and H. chrysotrichus. However, only T. rosea developed aerenchyma in the root cortex. K. coriacea and A. macrocarpon were the most sensitive to flooding, showing a decrease in survival and necrosis of the leaves and roots. C. langsdorffii and M. urundeuva were less sensitive to flooding, although reductions in root biomass and symptoms of necrosis of the roots were noticeable in flooded seedlings. Flooded M. urundeuva seedlings also had a decrease in total leaf area, leaf biomass, total biomass and in stem growth. Flooding affected root development and reduced stem growth of H. chrysotrichus with symptoms of necrosis of the leaves and roots. T. rosea was the only species where symptoms of injury from flooding were not evident.

  9. Quantificação e Avaliação das Principais Espécies Florestais Licenciadas no Estado do Acre de 2005 a 2012

    Directory of Open Access Journals (Sweden)

    Flávia Alessandra Pinheiro da Rocha Cordeiro e Silva

    Full Text Available O presente trabalho teve como objetivo avaliar, identificar e quantificar os 15 principais gêneros e espécies florestais exploradas legalmente no estado do Acre, na Amazônia brasileira, bem como analisar o número de autorizações emitidas para exploração de florestas manejadas, o volume de madeira e a área de manejo licenciada pelo Instituto de Meio Ambiente do Acre de janeiro de 2005 a agosto de 2012. Os dados coletados demonstraram que a área e o volume de madeira licenciados apresentaram um crescimento no período analisado, atingindo o ápice em 2010 e 2011, respectivamente. Os 15 principais gêneros e espécies licenciados foram: cumaru-ferro (Dipteryx spp., garapeira (Apuleia spp., sumaúma (Ceiba spp., açacu (Hura crepitans L., matamatá (Eschweilera spp., jatobá (Hymenaea spp., tauari (Couratari spp., manitê (Brosimun spp., caucho (Castilla ulei Warb., cedro (Cedrela spp., guariúba (Clarisia racemosa Ruiz e Pav., faveira (Parkia spp., copaíba (Copaifera spp., guaribeiro (Phyllocarpus riedelii Tul. e abiurana (Pouteria spp..

  10. ANÁLISE DA ESTRUTURA VEGETACIONAL EM UMA ÁREA DE CAATINGA NO MUNICÍPIO DE BOM JESUS, PIAUÍ

    Directory of Open Access Journals (Sweden)

    ALLYSON ROCHA ALVES

    2013-01-01

    Full Text Available The vegetation of the Caatinga has different types of unique landscapes, in which little is known. Considering the situation, this study aimed to perform a phytosociological survey in area of Ca atinga, located in Bom Jesus, Piauí. Were systematically re leased 15 quadratic plots with 400 m², with spacing of 80 m between plots and between lines. Within each sampli ng unit were measured all individuals with circumfe rence at breast height (CBH ≥ 6 cm, as measured in these individuals the CBH and the total height. With this, it were calculated the phytosociological parameters, diamet er distribution and diversity index of Shannon-Wean er (H'. In this survey we sampled 640 individuals represent ing 36 species, which provided a density of 1600 in d ha -1 and an estimated basal area of 17.02 m² ha -1 . The species most representatives were Copaifera langsdorffi Desf., Ptyrocarpa moniliformis Benth., Pterodon abruptus (Moric. Benth and Combretum glaucocarpum (Mart. Eichl. , with about 43% of the sampled and 40% in the area of ecological importance. The result of the diversity index of Shannon-Weaner was 2.96 nats in d -1 .

  11. Growth tree rings as bioindicator of environmental pollution employing SR-TXRF

    Energy Technology Data Exchange (ETDEWEB)

    Faria, Bruna Fernanda; Moreira, Silvana [Universidade Estadual de Campinas (UNICAMP), Campinas, SP (Brazil). Faculdade de Engenharia, Arquitetura e Urbanismo]. E-mail: silvana@fec.unicamp.br; Vives, Ana Elisa Sirito de [Universidade Metodista de Piracicaba (UNIMEP), Santa Barbara D' Oeste, SP (Brazil)]. E-mail: aesvives@unimep.br; Medeiros, Jean Gabriel da Silva; Tomazello Filho, Mario [Universidade de Sao Paulo (USP), SP (Brazil). Escola Superior de Agricultura Luiz de Queiroz]. E-mail: jeangm@esalq.usp.br; Zucchi, Orgheda Luiza Araujo Domingues [Universidade de Sao Paulo (USP), Ribeirao Preto, SP (Brazil). Faculdade de Ciencias Farmaceuticas]. E-mail: olzucchi@fcfrp.usp.br

    2007-07-01

    The present work has the aim to evaluate the use of tree ring as a bioindicator of the environmental pollution in urban and industrial areas. The sampling was made in a area located at the Forest Park, in the Bauru city, Sao Paulo state/Brazil. The area was contaminated by battery industries residues, which was interdicted by the Environmental Control Agency of the Sao Paulo State (CETESB), on March, 2002. Trees of Copaifera langsdorffi L. species were sampling in two different sites. The first one is near to the industry and other site 1700 m far. Synchrotron Radiation Total Reflection X-Ray Fluorescence technique (SR-TXRF) was employed to identify and quantify the metals of toxicological importance in the wood samples. The analysis was performed in the Brazilian Synchrotron Light Laboratory using a white beam for excitation and a hyperpure germanium detector for X-ray detection. In wood samples Cr, Co, Ni, Cu, Zn, As and Pb were determined. (author)

  12. ATIVIDADE INSETICIDA DE ÓLEOS VEGETAIS SOBRE Sitophilus zeamais MOTS. (COLEOPTERA: CURCULIONIDAE EM MILHO ARMAZENADO

    Directory of Open Access Journals (Sweden)

    Rodrigo Leandro Braga de Castro Coitinho

    2006-01-01

    Full Text Available Oils of andiroba (Carapa guianensis Aubl., copaiba (Copaifera sp., Eucaliptus globulus Labill. and Eucaliptus citriodora Hook., neem (Azadirachta indica A. Juss, eugenol, souari nut (Caryocar brasiliense Camb., rosemary (Lippia gracillis HBK., and cedar (Cedrela fissilis Vell. were evaluated in adults of Sitophilus zeamais Mots. (Coleoptera: Curculionidae. In the non-choice test, 20 g of corn grains per plot were treated with 50¿L of each oil and homogenized for two minutes. The plot was infested with eight 0 to 15 days-old S. zeamais adults. The E. globulus, eugenol, rosemary, and neem oils caused 100% mortality in S. zeamais adults. Except for copaiba, all oils caused mortality above 87% and the reduction in emergence of 100%. In the free-choice tests, arenas consisting of two plastic containers symmetrically interconnected to a central box by two plastic tubes were used. Twenty grams of non-treated corn (control were placed in one of the boxes and the same amount of grain treated with 50¿L of each oil comprised the other treatment. Sixteen non-sexed S. zeamais adults (0-15 days old were released in the central box. The rosemary, E. citriodora, eugenol and copaiba oils were the most repellent for S. zeamais adults, with repellence percentage varying from 97.3 to 87.7. Rosemary, andiroba, neem, and cedar reduced S. zeamais emergence in 100%, while the reduction caused by the other oils ranged from 72.7 to 97.9%.

  13. Growth tree rings as bioindicator of environmental pollution employing SR-TXRF

    International Nuclear Information System (INIS)

    Faria, Bruna Fernanda; Moreira, Silvana; Medeiros, Jean Gabriel da Silva; Tomazello Filho, Mario; Zucchi, Orgheda Luiza Araujo Domingues

    2007-01-01

    The present work has the aim to evaluate the use of tree ring as a bioindicator of the environmental pollution in urban and industrial areas. The sampling was made in a area located at the Forest Park, in the Bauru city, Sao Paulo state/Brazil. The area was contaminated by battery industries residues, which was interdicted by the Environmental Control Agency of the Sao Paulo State (CETESB), on March, 2002. Trees of Copaifera langsdorffi L. species were sampling in two different sites. The first one is near to the industry and other site 1700 m far. Synchrotron Radiation Total Reflection X-Ray Fluorescence technique (SR-TXRF) was employed to identify and quantify the metals of toxicological importance in the wood samples. The analysis was performed in the Brazilian Synchrotron Light Laboratory using a white beam for excitation and a hyperpure germanium detector for X-ray detection. In wood samples Cr, Co, Ni, Cu, Zn, As and Pb were determined. (author)

  14. Flavonoids modify root growth and modulate expression of SHORT-ROOT and HD-ZIP III.

    Science.gov (United States)

    Franco, Danilo Miralha; Silva, Eder Marques; Saldanha, Luiz Leonardo; Adachi, Sérgio Akira; Schley, Thayssa Rabelo; Rodrigues, Tatiane Maria; Dokkedal, Anne Ligia; Nogueira, Fabio Tebaldi Silveira; Rolim de Almeida, Luiz Fernando

    2015-09-01

    Flavonoids are a class of distinct compounds produced by plant secondary metabolism that inhibit or promote plant development and have a relationship with auxin transport. We showed that, in terms of root development, Copaifera langsdorffii leaf extracts has an inhibitory effect on most flavonoid components compared with the application of exogenous flavonoids (glycosides and aglycones). These compounds alter the pattern of expression of the SHORT-ROOT and HD-ZIP III transcription factor gene family and cause morpho-physiological alterations in sorghum roots. In addition, to examine the flavonoid auxin interaction in stress, we correlated the responses with the effects of exogenous application of auxin and an auxin transport inhibitor. The results show that exogenous flavonoids inhibit primary root growth and increase the development of lateral roots. Exogenous flavonoids also change the pattern of expression of specific genes associated with root tissue differentiation. These findings indicate that flavonoid glycosides can influence the polar transport of auxin, leading to stress responses that depend on auxin. Copyright © 2015 Elsevier GmbH. All rights reserved.

  15. Do edaphic aspects alter vegetation structures in the Brazilian restinga?

    Directory of Open Access Journals (Sweden)

    Francisco Soares Santos-Filho

    2013-09-01

    Full Text Available The vegetation of the Brazilian restinga (coastal woodland presents a variety of species and different characteristics, encompassing fields, fruit groves and forests on quartzarenic neosols. We hypothesised that the structure of the restinga landscape along the coast of the state of Piauí is influenced by edaphic factors and presents a pattern similar to that of other northeastern restingas. We evaluated three restingas in Piauí, using the quarter method to determine their structure. Composite soil samples were collected to determine their chemical and physical properties. Edaphic variables were correlated with plant species by canonical correspondence analysis (CCA. Phytosociological data for all three areas indicated regenerating vegetation comprising several small individuals, 82.5% of which showed a diameter at ground level < 13 cm. We also observed considerable tillering. In two of the areas, there was a predominance of Fabaceae species, such as Caesalpinia pyramidalis and Copaifera martii. Although the structural characteristics of the restingas studied were similar to those of other northeastern restingas, the former showed lower Shannon diversity indices (2.18-2.44. The CCA indicated that species distribution was influenced by edaphic factors such as pH, aluminium content and amount of organic matter. The restingas studied were similar to others along the Brazilian coast.

  16. Relationship of microstructure to fracture topography in orthopedic alloys

    International Nuclear Information System (INIS)

    Gilbertson, L.N.

    1976-01-01

    Two major alloys used for orthopedic implants are 316L stainless steel and a cast cobalt--chromium--molybdenum alloy similar to Haynes Stellite 21. Another alloy that is just being introduced is Ti--6Al--4V. All three of these alloys are used in different conditions with different microstructures. Standard specimens with typical microstructures encountered in orthopedic applications were loaded to fracture in both overload and fatigue modes. Different rates of loading were also used in some cases. The fracture surfaces of these standard samples were analyzed in the Scanning Electron Microscope. An attempt was made to relate the fracture behavior, as evidenced by the fracture typography, to the microstructure of the alloy as revealed by metallography

  17. PRE-ELECTIONAL DECREASE OF THE UNEMPLOYMENT RATE

    Directory of Open Access Journals (Sweden)

    Damjan Miličević

    2013-02-01

    Full Text Available Opportunistic business cycle models test whether the current government has the ability to reduce unemployment in pre-election period. First opportunistic business cycle models tested regressions using unemployment rate as the dependent variable, and for explanatory variables used unemployment rate in the previous two periods and political dummy variable defined as unity several quarters prior to election and zero elsewhere. Such models did not find evidence of opportunistic cycle for unemployment. Haynes and Stone in their model estimated regressions using unemployment as the dependent variable and sixteen dummy variables as explanatory variables (one for each quarter in the Presidential electoral term. Results showed that unemployment has roughly sinusoidal sixteen quarter cycle, where unemployment troughs on average the quarter of the election. Mentioned models are tested with data for the United States for the period from 1948 to 2011 where regressions results coincide with models mentioned in the article.

  18. Radial basis functions in mathematical modelling of flow boiling in minichannels

    Directory of Open Access Journals (Sweden)

    Hożejowska Sylwia

    2017-01-01

    Full Text Available The paper addresses heat transfer processes in flow boiling in a vertical minichannel of 1.7 mm depth with a smooth heated surface contacting fluid. The heated element for FC-72 flowing in a minichannel was a 0.45 mm thick plate made of Haynes-230 alloy. An infrared camera positioned opposite the central, axially symmetric part of the channel measured the plate temperature. K-type thermocouples and pressure converters were installed at the inlet and outlet of the minichannel. In the study radial basis functions were used to solve a problem concerning heat transfer in a heated plate supplied with the controlled direct current. According to the model assumptions, the problem is treated as twodimensional and governed by the Poisson equation. The aim of the study lies in determining the temperature field and the heat transfer coefficient. The results were verified by comparing them with those obtained by the Trefftz method.

  19. Hardness optimization of boride diffusion layer on Astm F-75 alloy using response surface methodology

    Energy Technology Data Exchange (ETDEWEB)

    Arguelles O, J. L.; Corona R, M. A. [Universidad Autonoma de San Luis Potosi, Doctorado Institucional en Ingenieria y Ciencia de Materiales, San Luis Potosi 78000, SLP (Mexico); Marquez H, A.; Saldana R, A. L.; Saldana R, A. [Universidad de Guanajuato, Ingenieria Mecanica Agricola DICIVA, Irapuato, Guanajuato 36500 (Mexico); Moreno P, J., E-mail: amarquez@ugto.mx [Universidad de Guanajuato, Departamento de Minas, Metalurgia y Geologia, Ex-Hacienda San Matias s/n, Guanajuato, Guanajuato 36020 (Mexico)

    2017-11-01

    In this study, the Response Surface Methodology (Rsm) and Central Composite Design (Ccd) were used to optimize the hardness of boride diffusion layer on Astm F-75 alloy (also called Haynes alloy). A boronizing thermochemical treatment was carried out at different temperatures and for different time periods. Hardness tests were conducted. The boride diffusion layer was verified by the X-ray diffraction (XRD) analysis indicating the formation of Co B, Co{sub 2}B, Cr B and Mo{sub 2}B phases. An optimal hardness of 3139.7 Hv was obtained for the samples subjected to the boriding process for a duration of 6.86 h at 802.4 degrees Celsius. (Author)

  20. Optical properties of Pyromark 2500 coatings of variable thicknesses on a range of materials for concentrating solar thermal applications

    Science.gov (United States)

    Coventry, Joe; Burge, Patrick

    2017-06-01

    In this paper we present the results of solar absorptance measurements of four metallic substrate materials, either coated with Pyromark 2500 at various thicknesses, or uncoated and oxidised. Absorptance is measured prior to aging, and during and after aging at three elevated temperatures. In many cases, thin coatings perform as well, or better than thick coatings and do not appear to have a higher rate of failure. However, a thicker coating did show an advantage after aging at the highest temperature tested (850°C), and it is expected that with longer exposure, similar trends may emerge for the 600°C and 750°C aging cases. Another finding is that the two nickel-based alloys tested, Haynes 230 and Inconel 625, both formed an oxide with very good absorptance, although durability requires further testing.

  1. Microstructural evolutions and mechanical behaviour of the nickel based alloys 617 and 230 at high temperature

    International Nuclear Information System (INIS)

    Chomette, S.

    2009-11-01

    High Temperature Reactors (HTR), is one of the innovative nuclear reactor designed to be inherently safer than previous generation and to produce minimal waste. The most critical metallic component in that type of reactor is the Intermediate Heat exchanger (IHX). The constraints imposed by the conception and the severe operational conditions (high temperature of 850 C to 950 C, lifetime of 20,000 h) have guided the IHX material selection toward two solid solution nickel base alloys, the Inconel 617 and the Haynes 230. Inconel 617 is the primary candidate alloy thanks to its good high temperature mechanical and corrosion properties and the large data base developed in previous programs. However, its high cobalt content has to be considered as an issue (nuclear activation). The more recent alloy Haynes 230, in which most of the cobalt has been replaced by tungsten, present characteristics similar to the 617 alloy. The objective of this thesis is to study the high temperature mechanical behaviour of both alloys in relation with their microstructural evolutions. The as received microstructural observations have revealed primary carbides (M 6 C). Most of this precipitates are evenly distributed in the materials. Few M 23 C 6 secondary carbides are observed in both alloys in the as received state. Thermal ageing treatments at 850 C lead to an important M 23 C 6 precipitation on slip lines and at grain boundaries. The size of this carbides increases and their number decreases with increasing ageing duration. The intragranular precipitation of secondary carbides at 950 C is more limited and the intergranular evolution more important than at 850 C. The microstructural observations and the hardness evolution of both alloys show that the main microstructural evolutions occur before 1,000 h at both studied temperatures. The mechanical properties of the Inconel 617 and the Haynes 230 have been studied using tensile, creep, fatigue and relaxation-fatigue tests. Particularly, the

  2. High temperature coatings from post processing Fe-based chips and Ni-based alloys as a solution for critical raw materials

    Science.gov (United States)

    Dudziak, T.; Olbrycht, A.; Polkowska, A.; Boron, L.; Skierski, P.; Wypych, A.; Ambroziak, A.; Krezel, A.

    2018-03-01

    Due to shortage of natural resources worldwide, it is a need to develop innovative technologies, to save natural resources and secure Critical Raw Materials (CRM). On the other hand, these new technologies should move forward materials engineering in order to develop better materials for extreme conditions. One way to develop new materials is to use post processing chips of austenitic steels (i.e. 304L stainless steel: 18/10 Cr/Ni) and other materials such as Ni-based alloy with high Cr content. In this work, the results of the preliminary study on the High Velocity Oxy Fuel (HVOF) coatings developed from 304L stainless steel chips and Haynes® 282® Ni- based alloys are shown. The study obeys development of the powder for HVOF technology. The produced coatings were exposed at high temperature at 500 and 700 °C for 100 and 300 hours respectively to assess corrosion behaviour.

  3. Fabrication of three 2500-watt (thermal) strontium-90 heat sources

    International Nuclear Information System (INIS)

    DeVore, J.R.; Haff, K.W.; Tompkins, J.A.

    1986-08-01

    Three 2500-watt (thermal) heat sources were fabricated by the Oak Ridge National Laboratory (ORNL) for the purpose of fueling a 500-watt (electric) thermoelectric generator as part of the US Department of Energy's Byproducts Utilization Program (BUP). Each of the sources, which are the largest ever assembled, consist of hot-pressed pellets of 90 Sr fluoride, doubly encapsulated in three Haynes-25 inner capsules and in a Hastelloy-S outer capsule. The total 90 Sr inventory of all three sources is 1.12 million curies. The sources were fabricated at the ORNL Fission Product Development Laboratory (FPDL), which is a facility that is capable of processing multi-megacurie quantities of radioactive materials, chiefly 137 Cs and 90 Sr. The source was tested to determine compliance with all of the IAEA Safety Series No. 33 requirements. The source fabrication, assembly, and testing are described in the presentation

  4. A statistical solution for survival curves in photobiology

    International Nuclear Information System (INIS)

    Chen, L.C.

    1981-01-01

    The mathematical model that includes the cellular repair mechanisms proposed by Haynes and modified by Pelico has been adjusted by Non-linear Least Squares Method and a computer program was also used. The parametric values obtained agreed with the graphic ones. This method has the advantage that one can obtain the parameters by a function fitting at all the experimental measurement, and also allows the determination of experimental errors. The studies performed on pre-starved cells without amino-acids and glucose show a greater photo-resistance for strains non mutated in uvr gene. This phenomenon appears to be dependent on functionality of this gene. A mathematical model was proposed to describe quantitatively the starvation effect in function of time. (Author) [pt

  5. STABILITY ANALYSIS OF RADIAL TURNING PROCESS FOR SUPERALLOYS

    Directory of Open Access Journals (Sweden)

    Alberto JIMÉNEZ

    2017-07-01

    Full Text Available Stability detection in machining processes is an essential component for the design of efficient machining processes. Automatic methods are able to determine when instability is happening and prevent possible machine failures. In this work a variety of methods are proposed for detecting stability anomalies based on the measured forces in the radial turning process of superalloys. Two different methods are proposed to determine instabilities. Each one is tested on real data obtained in the machining of Waspalloy, Haynes 282 and Inconel 718. Experimental data, in both Conventional and High Pressure Coolant (HPC environments, are set in four different states depending on materials grain size and Hard-ness (LGA, LGS, SGA and SGS. Results reveal that PCA method is useful for visualization of the process and detection of anomalies in online processes.

  6. Structural assessment of a space station solar dynamic heat receiver thermal energy storage canister

    Science.gov (United States)

    Thompson, R. L.; Kerslake, T. W.; Tong, M. T.

    1988-01-01

    The structural performance of a space station thermal energy storage (TES) canister subject to orbital solar flux variation and engine cold start up operating conditions was assessed. The impact of working fluid temperature and salt-void distribution on the canister structure are assessed. Both analytical and experimental studies were conducted to determine the temperature distribution of the canister. Subsequent finite element structural analyses of the canister were performed using both analytically and experimentally obtained temperatures. The Arrhenius creep law was incorporated into the procedure, using secondary creep data for the canister material, Haynes 188 alloy. The predicted cyclic creep strain accumulations at the hot spot were used to assess the structural performance of the canister. In addition, the structural performance of the canister based on the analytically determined temperature was compared with that based on the experimentally measured temperature data.

  7. Biaxial Creep Specimen Fabrication

    International Nuclear Information System (INIS)

    JL Bump; RF Luther

    2006-01-01

    This report documents the results of the weld development and abbreviated weld qualification efforts performed by Pacific Northwest National Laboratory (PNNL) for refractory metal and superalloy biaxial creep specimens. Biaxial creep specimens were to be assembled, electron beam welded, laser-seal welded, and pressurized at PNNL for both in-pile (JOYO reactor, O-arai, Japan) and out-of-pile creep testing. The objective of this test campaign was to evaluate the creep behavior of primary cladding and structural alloys under consideration for the Prometheus space reactor. PNNL successfully developed electron beam weld parameters for six of these materials prior to the termination of the Naval Reactors program effort to deliver a space reactor for Project Prometheus. These materials were FS-85, ASTAR-811C, T-111, Alloy 617, Haynes 230, and Nirnonic PE16. Early termination of the NR space program precluded the development of laser welding parameters for post-pressurization seal weldments

  8. Laser Cutting of Materials of Various Thicknesses

    Directory of Open Access Journals (Sweden)

    Martin Grepl

    2012-01-01

    Full Text Available Thise paper deals with the application of laser technology and optimizing the parameters for cutting nickel alloy. The theoretical part of the paper describes various types of lasers, their principles and usage. The experimental part focuses on optimizing the section parameteres of Haynes 718 alloy using a CO2 gas laser. This alloy is employed in the production of components for the aircraft industry. The experiment was performed on the Wibro Delta laser system designed for sizable parts. The actual section is measured with respect to its quality and any accompanying side effects that occur during the process. In this case, laser output and cutting speed were the parameters with most influence on the final cut. The summary explains the results achieved in a metallographic laboratory.

  9. Corrosion studies and recommendation of alloys for an incinerator of glove-boxes wastes

    International Nuclear Information System (INIS)

    Devisme, F.; Garnier, M.H.

    1992-01-01

    In the framework of the development of an incineration process for high chlorinated wastes, commercial alloys have been investigated by means of parametric laboratory tests in HCl containing gas mixtures and also in field tests. Recommendations may be formulated for the three main components i.e. pyrolyser, calciner and cooler. In very low oxygen-potential atmospheres, the alloys Hastelloy C276 and Inconel 625 present the best behaviours. For the calciner, alloy Inconel 601 is more satisfactory than AISI 310 steel. As for the cooler, only the alloy Haynes 214 appears acceptable at 1100 deg C. Because of the very low stress level affecting the components, thermomechanical properties do not modify these recommendations based on corrosion behaviour

  10. High temperature materials for radioactive waste incineration and vitrification. Revision 1

    International Nuclear Information System (INIS)

    Bickford, D.F.; Ondrejcin, R.S.; Salley, L.

    1986-01-01

    Incineration or vitrification of radioactive waste subjects equipment to alkaline or acidic fluxing, oxidation, sulfidation, carburization, and thermal shock. It is necessary to select appropriate materials of construction and control operating conditions to avoid rapid equipment failure. Nickel- and cobalt-based alloys with high chromium or aluminum content and aluminum oxide/chromium oxide refractories with high chromium oxide content have provided the best service in pilot-scale melter tests. Inconel 690 and Monofrax K-3 are being used for waste vitrification. Haynes 188 and high alumina refractory are undergoing pilot scale tests for incineration equipment. Laboratory tests indicate that alloys and refractories containing still higher concentrations of chromium or chromium oxide, such as Inconel 671 and Monofrax E, may provide superior resistance to attack in glass melter environments

  11. Biaxial Creep Specimen Fabrication

    Energy Technology Data Exchange (ETDEWEB)

    JL Bump; RF Luther

    2006-02-09

    This report documents the results of the weld development and abbreviated weld qualification efforts performed by Pacific Northwest National Laboratory (PNNL) for refractory metal and superalloy biaxial creep specimens. Biaxial creep specimens were to be assembled, electron beam welded, laser-seal welded, and pressurized at PNNL for both in-pile (JOYO reactor, O-arai, Japan) and out-of-pile creep testing. The objective of this test campaign was to evaluate the creep behavior of primary cladding and structural alloys under consideration for the Prometheus space reactor. PNNL successfully developed electron beam weld parameters for six of these materials prior to the termination of the Naval Reactors program effort to deliver a space reactor for Project Prometheus. These materials were FS-85, ASTAR-811C, T-111, Alloy 617, Haynes 230, and Nirnonic PE16. Early termination of the NR space program precluded the development of laser welding parameters for post-pressurization seal weldments.

  12. Design and Fabrication Technique of the Key Components for Very High Temperature Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Ho Jin; Song, Ki Nam; Kim, Yong Wan

    2006-12-15

    The gas outlet temperature of Very High Temperature Reactor (VHTR) may be beyond the capability of conventional metallic materials. The requirement of the gas outlet temperature of 950 .deg. C will result in operating temperatures for metallic core components that will approach very high temperature on some cases. The materials that are capable of withstanding this temperature should be prepared, or nonmetallic materials will be required for limited components. The Ni-base alloys such as Alloy 617, Hastelloy X, XR, Incoloy 800H, and Haynes 230 are being investigated to apply them on components operated in high temperature. Currently available national and international codes and procedures are needed reviewed to design the components for HTGR/VHTR. Seven codes and procedures, including five ASME Codes and Code cases, one French code (RCC-MR), and on British Procedure (R5) were reviewed. The scope of the code and code cases needs to be expanded to include the materials with allowable temperatures of 950 .deg. C and higher. The selection of compact heat exchangers technology depends on the operating conditions such as pressure, flow rates, temperature, but also on other parameters such as fouling, corrosion, compactness, weight, maintenance and reliability. Welding, brazing, and diffusion bonding are considered proper joining processes for the heat exchanger operating in the high temperature and high pressure conditions without leakage. Because VHTRs require high temperature operations, various controlled materials, thick vessels, dissimilar metal joints, and precise controls of microstructure in weldment, the more advanced joining processes are needed than PWRs. The improved solid joining techniques are considered for the IHX fabrication. The weldability for Alloy 617 and Haynes 230 using GTAW and SMAW processes was investigated by CEA.

  13. Structural analysis of a reflux pool-boiler solar receiver

    Energy Technology Data Exchange (ETDEWEB)

    Hoffman, E.L.; Stone, C.M.

    1991-06-01

    Coupled thermal-structural finite element calculations of a reflux pool-boiler solar receiver were performed to characterize the operating stresses and to address issues affecting the service life of the receiver. Analyses performed using shell elements provided information for receiver material selection and design optimization. Calculations based on linear elastic fracture mechanics principles were performed using continuum elements to assess the vulnerability of a seam-weld to fatigue crack growth. All calculations were performed using ABAQUS, a general purpose finite element code, and elements specifically formulated for coupled thermal-structural analysis. Two materials were evaluated: 316L SS and Haynes 230 alloys. The receiver response was simulated for a combination of structural and thermal loads that represent the startup and operating conditions of the receiver. For both materials, maximum stresses in the receiver developed shortly after startup due to uneven temperature distribution across the receiver surface. The largest effective stress was near yield in the 316L SS receiver and below 39 percent of yield in the Haynes 230 receiver. The calculations demonstrated that stress reductions of over 25 percent could be obtained by reducing the aft dome thickness to one closer to the absorber. The fatigue calculations demonstrated that the stress distribution near the seam-weld notch depends primarily on the structural load created by internal pressurization of the receiver rather than the thermal, indicating that the thermal loads can be neglected when assessing the stress intensity near the seam-weld notch. The stress intensity factor, computed using the J-integral method and crack opening-displacement field equations, was significantly below the fatigue threshold for most steels. The calculations indicated that the weld notch was always loaded in compression, a condition which is not conducive to fatigue crack growth. 15 refs., 30 figs., 3 tabs.

  14. Design and Fabrication Technique of the Key Components for Very High Temperature Reactor

    International Nuclear Information System (INIS)

    Lee, Ho Jin; Song, Ki Nam; Kim, Yong Wan

    2006-12-01

    The gas outlet temperature of Very High Temperature Reactor (VHTR) may be beyond the capability of conventional metallic materials. The requirement of the gas outlet temperature of 950 .deg. C will result in operating temperatures for metallic core components that will approach very high temperature on some cases. The materials that are capable of withstanding this temperature should be prepared, or nonmetallic materials will be required for limited components. The Ni-base alloys such as Alloy 617, Hastelloy X, XR, Incoloy 800H, and Haynes 230 are being investigated to apply them on components operated in high temperature. Currently available national and international codes and procedures are needed reviewed to design the components for HTGR/VHTR. Seven codes and procedures, including five ASME Codes and Code cases, one French code (RCC-MR), and on British Procedure (R5) were reviewed. The scope of the code and code cases needs to be expanded to include the materials with allowable temperatures of 950 .deg. C and higher. The selection of compact heat exchangers technology depends on the operating conditions such as pressure, flow rates, temperature, but also on other parameters such as fouling, corrosion, compactness, weight, maintenance and reliability. Welding, brazing, and diffusion bonding are considered proper joining processes for the heat exchanger operating in the high temperature and high pressure conditions without leakage. Because VHTRs require high temperature operations, various controlled materials, thick vessels, dissimilar metal joints, and precise controls of microstructure in weldment, the more advanced joining processes are needed than PWRs. The improved solid joining techniques are considered for the IHX fabrication. The weldability for Alloy 617 and Haynes 230 using GTAW and SMAW processes was investigated by CEA

  15. CRESCIMENTO E SOBREVIVÊNCIA DE ESPÉCIES ARBÓREAS EM DIFERENTES MODELOS DE PLANTIO NA RECUPERAÇÃO DE ÁREA DEGRADADA POR DISPOSIÇÃO DE RESÍDUOS SÓLIDOS URBANOS1

    Directory of Open Access Journals (Sweden)

    Luana Auxiliadora de Resende

    2015-02-01

    Full Text Available Objetivou-se, neste trabalho, avaliar o desenvolvimento silvicultural e a sobrevivência das espécies em diferentes modelos de plantio de mudas para recuperação da área do lixão de Inconfidentes – Sul de Minas Gerais/Brasil, a qual se encontra com deficiência de vegetação, o que proporciona impactos visual e ambiental, com o intuito de indicar diferentes espécies vegetais que possam ser ideais para serem utilizadas na requalificação dos lixões. O experimento foi instalado no delineamento estatístico inteiramente casualizado com quatro modelos de plantio envolvendo mudas de 11 espécies arbóreas nativas e da gramínea Chrysopogon zizanioides (M1- Leguminosas; M2- Leguminosas + Chrysopogon zizanioides; M3- nativas e M4- Eremanthus erytropappus e Nectandra lanceolata e três repetições. As parcelas de 3 x 5 m de cada tratamento foram compostas por 15 mudas arbóreas, sendo acrescidas em cada modelo de plantio M2 oito mudas da gramínea Vetiver (C. Zizanioides. Foram avaliados ao longo de 20 meses a altura das plantas, o diâmetro do caule ao nível do solo, a área de copa e a sobrevivência, em intervalos de 30 dias. Os dados do crescimento silvicultural e sobrevivência entre os tratamentos e entre as espécies foram submetidos à análise de variância e as médias, comparadas pelo teste de Scott Knott a 5% de probabilidade. A partir da análise dos resultados da recuperação da área do desativado Lixão de Inconfidentes – Sul de Minas Gerais/Brasil, conclui-se que o modelo de plantio M2 e as espécies Bauhinia forficata, Eritrina falcata, Senna multijuga, Schizolobium parahyba e Schinus terebinthifolius são as mais indicadas para recuperação da área.

  16. Estudo etnobotânico na comunidade de Conceição-Açu (alto da bacia do rio Aricá Açu, MT, Brasil Ethnobotany study in community of Conceição-Açu (on the upper basin of the River Aricá Açu, MT, Brazil

    Directory of Open Access Journals (Sweden)

    Maria Corette Pasa

    2005-06-01

    Full Text Available O presente trabalho tem como objetivo realizar o levantamento etnobotânico de plantas classificadas em diferentes categorias de uso na comunidade de Conceição-Açu, no município de Cuiabá, MT, Brasil e estimar o valor de uso das espécies botânicas em matas de galeria. Entrevistas estruturadas e semi-estruturadas, o uso do questionário foram aplicados em 59 residentes adultos de ambos os sexos. Identificou-se as unidades de paisagem: quintais, roças e matas de galeria e o número total de espécies utilizadas foi de 180. A maioria das plantas foi coletada durante a entrevista e depositadas no Herbário da UFMT. Nos quintais das residências identificou-se 86 espécies, pertencentes a 43 famílias, a maioria cultivada e utilizada como alimento (48,1% e como remédio (44,5%. Nas roças os principais cultivos são: Manihot esculenta L. (100%, Carica papaya L. (76,2%, Musa paradisiaca L. (71,4%, Saccharum officinarum L. (57,1%. Na mata de galeria destacou-se a categoria medicinal (65%, com as espécies: Copaifera langsdorffii Desf. (2,5, Aspidosperma polyneuron Muell. Arg. (2,5, Hymenaea stignocarpa Mart. (2,33, Diptychandra aurantiaca Tul. (2,0, Cariniana rubra Gardner ex. Miers (20 e as famílias botânicas Mimosaceae, Bignoniaceae, Caesalpiniaceae, Fabaceae e Sapindaceae. Os resultados demonstram que a população possui vasto conhecimento das plantas e de suas propriedades de cura.This paper aims at doing the ethnobotany survey of plants classified in different categories of use in the community of Conceição-Açu, in the city of Cuiabá, MT, Brazil and estimate the value of use of the species botanic in the gallery forest. Structured and non-structured interviews and the questionnaire were used in 59 adult dwellers of both sexes. Were identified the landscape units: backyards, husbandry and gallery forest and the total number of used species is the 180. The majority of the plants was collected during the interview and is kept in the

  17. Toxicity and repellency of essential oils to Zabrotes subfasciatus (Boheman (Coleoptera, Chrysomelidae, Bruchinae in Phaseolus vulgaris L Toxicidade e repelência de óleos essenciais a Zabrotes subfasciatus (Boheman (Coleoptera, Chrysomelidae, Bruchinae em grãos de Phaseolus vulgaris L

    Directory of Open Access Journals (Sweden)

    Solange Maria de França

    2012-09-01

    Full Text Available The effects of tangerine (Phaseolus vulgaris Blanco, lemon (Citrus medica limonum Lush, pear orange (Citrus sinensis L. Osbeck, red copaiba (Copaifera langsdorffii Desf., rosemary (Baccharis dracunculifolia De Candole, Eucalyptus (Eucalyptus globulus Labillardière and E. citriodora Hook, lemongrass (Cymbopogon citratus Stapf. and citronella (Cimbopogon nardus Linnaeus oils at several concentrations on Zabrotes subfasciatus (Boheman were studied. In toxicity tests, grains of Phaseolus vulgaris L. cv. Rajadinho were impregnated with oils and infested with adults of Z. subfasciatus up to 24 hours old. All tested oils were effective in reducing the viable egg-laying and adult emergence of this pest, in function of the concentrations used, highlighting E. citriodora and E. globulus oils which caused 100% effectiveness from 0.5 mL Kg-1 concentration. In repellency tests, two arenas consisting of plastic containers, connected symmetrically to a central box by two plastic tubes were used. In one of the boxes, untreated beans were placed and on the other ones beans treated with each oil concentration were used. In the central box, five couples of Z. subfasciatus were released. Grains of P. vulgaris treated with oils of E. citriodora, C. citratus and C. oleifera reduced the attraction percentage of Z. subfasciatus adults, while the E. globulus increased this percentage. The percentages of reduced viable eggs ranged from 17.9% (C. medica limonum to 93.3% (C. nardus, while the reduction on the number of emerged insects was 23.9% and 95.9%, respectively for these same oils.Estudaram-se os efeitos dos óleos de tangerina 'Cravo' (Phaseolus vulgaris Blanco, limão-siciliano (Citrus medica limonum Lush, laranja 'Pêra' (Citrus sinensis L. Osbeek, copaíba-vermelha (Copaifera langsdorffii Desf., alecrim-do-campo (Baccharis dracunculifolia De Candole, eucalipto (Eucalyptus globulus Labillardière e Eucalyptus citriodora Hook, capim-santo (Cymbopogon citratus

  18. Análise físico-química do óleo-resina e variabilidade genética de copaíba na Floresta Nacional do Tapajós Physico-chemical analysis of the oleoresin and genetic variability of copaiba in the Tapajós National Forest, Brazil

    Directory of Open Access Journals (Sweden)

    Ederly Santos Silva

    2012-11-01

    Full Text Available O objetivo deste trabalho foi caracterizar o óleo-resina da copaíba (Copaifera reticulata e estimar, por meio de marcadores microssatélites, a variabilidade genética da espécie na Floresta Nacional do Tapajós, PA. A amostragem foi realizada em duas áreas, distanciadas de 5 km, em 136 árvores. A diversidade genética foi avaliada com seis marcadores microssatélites derivados de C. langsdorffii, e o óleo obtido de 30 árvores (15 de cada área foi caracterizado em termos físicos e químicos. O óleo C. reticulata apresenta aspecto líquido, fino, odor fraco e de coloração amarelo-dourada (73,3% das plantas, com viscosidade muito variável (18 a 187 Pa-s e densidade média de 0,975±0,049 g cm-3. O índice de acidez variou de 9,62 a 10,17 mg g-1 de KOH e o de saponificação de 100,63 a 109,84 mg g-1. A análise molecular identificou 78 alelos, com média de 13 por loco. A heterozigosidade esperada variou 0,59 a 0,85 (média de 0,75, com nível de endogamia de 0,375 a 0,419. Houve pouca diferenciação genética entre as populações das diferentes áreas de coleta (F ST = 0,030, mas a variabilidade foi maior entre os grupos genéticos detectados pelo programa Structure (F ST = 0,070. Essa maior variabilidade indica que não há ameaças à conservação genética da copaíba, em médio prazo.The objective of this work was to characterize the oleoresin of copaiba (Copaifera reticulata and to estimate genetic variability of the species in the Tapajós National Forest, PA, Brazil, using microsatellite markers. Sampling was performed in two areas, 5 km apart, in 136 trees. Genetic diversity was evaluated with six microsatellite markers derived from C. langsdorffii, and the oleoresin obtained from 30 trees (15 from each area was physically and chemically characterized. Oleoresin from C. reticulate has a liquid, thin aspect, with a weak odor and yellowish-gilded color (73.3% of the plants, highly variable viscosity (18 to 187 Pa-s, and mean

  19. Superação de dormência de sementes como estratégia para restauração florestal de pastagem tropical Seed dormancy overcoming as a strategy for forest restoration in tropical pasture

    Directory of Open Access Journals (Sweden)

    Silvia Rahe Pereira

    2013-02-01

    Full Text Available O objetivo deste trabalho foi avaliar a influência de tratamentos de superação da dormência de sementes sobre a taxa e o tempo de emergência de espécies arbóreas de Fabaceae, e sobre seu estabelecimento, quando reintroduzidas em pastagem, no Cerrado. Foram realizados experimentos em casa de vegetação e em campo (pastagem de Urochloa brizantha, com as espécies Mimosa caesalpiniifolia, Peltophorum dubium, Pterogyne nitens, Dimorphandra mollis, Copaifera langsdorffii e Hymenaea stigonocarpa, submetidas ou não aos seguintes tratamentos de superação de dormência: D. mollis e H. stigonocarpa, escarificação mecânica; C. langsdorffii e M. caesalpiniifolia, escarificação química com H2SO4; P. nitens, punção do tegumento; e P. dubium, imersão em água a 80ºC. O estabelecimento em campo foi monitorado por 21 meses. A superação de dormência promoveu, em casa de vegetação, maior emergência de quatro das seis espécies avaliadas, e, no campo, de cinco espécies. Além disso, reduziu o tempo de emergência das espécies e aumentou o recrutamento de M. caesalpiniifolia, P. nitens, D. mollis e H. stigonocarpa, aos 127 dias, e de H. stigonocarpa aos 659 dias. Os tratamentos de superação de dormência podem aumentar a eficiência da semeadura direta, em projetos de restauração de áreas degradadas no Cerrado, ao promover maior emergência das sementes e o estabelecimento das plantas.The objective of this work was to evaluate the influence of seed dormancy overcoming treatments on the rate and time of emergence of Fabaceae tree species, and on their recruitment when reintroduced in a tropical pasture, in the Brazilian Cerrado. Experiments were carried out in greenhouse and field (Urochloa brizantha pasture, with the species Mimosa caesalpiniifolia, Peltophorum dubium, Pterogyne nitens, Dimorphandra mollis, Copaifera langsdorffii and Hymenaea stigonocarpa, subjected or not to the following treatments of dormancy break: D. mollis and

  20. Morphometric of four species in agroforestry systems in the municipality of Porto Velho, Rondônia. = Morfometria de quatro espécies florestais em sistemas agroflorestais no munícipio de Porto Velho, Rondônia

    Directory of Open Access Journals (Sweden)

    Tiago Monteiro Condé

    2013-04-01

    Full Text Available This study aims to describe the morphometry of Andiroba (Carapa guianensis Aubl, Brasil nut tree (Bertholletia excelsa HBK, Copaíba (Copaifera langsdorffii Desf. Mogno (Swietenia macrophylla King. and simulate the vital space for it to grow without competition in agroforestry plantations. Data were collected in 20 agroforestry (SAF’s considered productive age (16.5 years of Project RECA (Economic Reforestation Consortium and Compacted, the municipality of Porto Velho, Rondônia. The deployment of the SAF’s occurred through the removal of vegetation through the process of clearing and burningof native forests. Morphometric data were collected randomly from individuals with DBH > 10 cm of four tree species in onehectare of each farm, for a total sample area of 20 ha (20 properties. The sample was composed by 25 individuals of Andiroba,40 of Brasil nut tree, 23 of Copaíba and 46 of Mogno. Andiroba was very similar to Mogno in relation to Cup Percentage (PC,Coverage Index (AI and Cup Form (FC, both showed potential for higher density plantations with timber purposes. The Brasilnut tree and Copaíba had the highest values of the FC (1.66, 1.79 and Crown Area (92.60, 57.51, respectively, showing frondscrowns, silvicultural interesting features for the extraction of seeds. Was simulated living space for the four species developwithout competition between cups. It was concluded that the four species have potential for planting for extraction of timberand non-timber forest in areas subject to degradation and deforestation in the Amazon.ResumoO presente estudo visa descrever a morfometria das espécies Andiroba (Carapa guianensis Aubl, Castanheira-do-Brasil (Bertholletia excelsa H.B.K., Copaíba (Copaifera langsdorffii Desf. e Mogno (Swietenia macrophylla King. e simular o espaço vital para que as mesmas cresçam sem concorrência em plantios agroflorestais. Os dados foram coletadosem vinte sistemas agroflorestais (SAF’s em idade considerada

  1. Efeito in vitro de compostos de plantas sobre o fungo Colletotrichum gloeosporioides Penz: isolado do maracujazeiro In vitro effect of plant compounds on the fungus Colletotrichum gloeosporioides Penz: isolated from passion fruit

    Directory of Open Access Journals (Sweden)

    André Costa da Silva

    2009-01-01

    Full Text Available Neste trabalho, objetivou-se avaliar o efeito de extratos e óleos essenciais de quatorze plantas medicinais e ou nativas, conhecidas popularmente no Norte de Minas Gerais, sobre a germinação de esporos e crescimento micelial do fungo Colletotrichum gloeosporioides. Foram utilizados no teste de inibição do crescimento micelial, os extratos aquosos de alecrim (Rosmarinus officinalis, erva baleeira (Cordia verbenacea, joá (Solanum sisymbriifolium, quebra-pedra (Phyllanthus corcovadensis, erva botão (Eclipta alba e açafrão da índia (Curcuma longa obtidos por meio do processo de infusão; óleo essencial de alecrim de vargem (Família Lamiaceae, alecrim pimenta (Lippia sidoides, alfavaca cravo (Ocimum gratissimum, lippia (Lippia citriodora, goiaba branca (Psidium guajava, capim santo (Cymbopogon citratus; óleo resina de copaíba (Copaifera langsdorffi; hidrolatos de alecrim de vargem, goiaba vermelha (Psidium guajava, lippia, capim santo, goiaba branca, alfavaca cravo; manipueira de (Manihot esculenta. Também foram testados esses mesmos hidrolatos e os óleos essenciais na germinação dos esporos do fungo. Todos os tratamentos foram realizados in vitro, cultivando-se o fungo em meio de cultura BDA acrescido de 100μL dos compostos vegetais. No teste de inibição da germinação, todos os óleos essenciais impediram a germinação do fungo. No entanto, os hidrolatos não tiveram esse efeito. No teste de crescimento micelial, os óleos essenciais de todas as plantas inibiram completamente o crescimento do fungo, exceto o óleo da goiaba branca. Os extratos aquosos, a manipueira, o óleo resina e os hidrolatos, também não foram eficientes sobre o crescimento do patógeno. Esses resultados indicam o potencial antifúngico de alguns óleos essenciais de plantas medicinais.The objective of the work was to evaluate the effect of extracts and essential oils of fourteen medicinal and or native plants popularly known in the North of Minas

  2. Diversidad de árboles y arbustos en fragmentos de bosque seco tropical en río Hato, Panamá

    Directory of Open Access Journals (Sweden)

    Omar R Lopez

    2015-01-01

    Full Text Available En fragmentos de bosque seco tropical en Río Hato, Panamá, estudiamos la composición florística según los árboles y arbustos. Establecimos 61 parcelas de 100 m2 distribuidas de forma aleatoria, totalizando 0.61 hectáreas. En cada unidad de muestreo medimos todos los individuos presentes con un DAP >5.0 cm. Encontramos un total de 52 especies de árboles representadas en veinticinco familias, de las cuales Fabaceae, Burseraceae, Myrtaceae y Rubiaceae aportan mayor número de especies (~35%. La especie Sloanea terniflora (Sessé & Moç. ex DC. Standl se encontró en más del 60.6% de los cuadrantes estudiados y resultó además ser la especie con mayor dominancia relativa (23%, seguida de Anacardium excelsum (Bertero & Balb. ex Kunth Skeels, que con solo quince individuos de grandes diámetros presentó una dominancia relativa del 10%. La diversidad promedio reveló índices intermedios (3.13 índice de Shannon. A pesar del bajo número de especies en comparación con otros BS-T de la región, los fragmentos en Río Hato conservan elementos florísticos de importancia ecológica y para la conservación de los bosques secos. Garcinia madruno (Kunth Hammel, una de las especies más abundante es clave en la producción de frutos para la fauna. Otras especies de importancia son Manilkara sapota (L. P. Royen y Copaifera aromatica Dwyer, las cuales aún son utilizadas como recurso maderero. Es prioritario para Panamá establecer estrategias de conservación que salvaguarden estos fragmentos como fuente de especies del bosque seco tropical y refugio para la vida silvestre.

  3. Plant species as a therapeutic resource in areas of the savanna in the state of Pernambuco, Northeast Brazil.

    Science.gov (United States)

    Saraiva, Manuele Eufrasio; Ulisses, Ana Vartan Ribeiro de Alencar; Ribeiro, Daiany Alves; de Oliveira, Liana Geraldo Souza; de Macêdo, Delmácia Gonçalves; de Sousa, Francisca de Fátima Silva; de Menezes, Irwin Rose Alencar; Sampaio, Everardo Valadares de Sá Barretto; Souza, Marta Maria de Almeida

    2015-08-02

    Ethnobotanical studies have contributed significantly in research of plants with therapeutic potential. The aim of the present study was to learn about the use of native medicinal plants cited by the traditional population in "cerradão" (savanna woodland) areas in Northeast Brazil, providing data on therapeutic indications of the species used and their versatility. Semi-structured interviews were conducted on the basis of a standardized questionnaire designed for key informants selected using the "snowball" technique. The selection of plants species with therapeutic potential was performed on the basis of the relative importance (RI) and informant consensus fator (ICF). A total of 78 species were indicated for 87 therapeutic purposes. Of these, 11 species presented great versatility of use (RI>1), as e.g.including Copaifera langsdorffii Desf., Hybanthus calceolaria (Mart.) Plumel., Heliotropium cf. indicum L., Croton zehntneri, Croton heliotropiifolius, Myracrodruon urundeuva, Stryphnodendro rotundifolium. Medicinal uses could be generalized Pax & K. Hoffm and Hymenaea courbaril L. The therapeutic indications were grouped into 14 use 15 categories with 594 species-category combinations. The largest number of medicinal species was indicated for illnesses or undefined pain, followed by diseases associated with respiratory, digestive and genitourinaryof body systems. The factor informant consensus highlighted the agreement in the use of plants and showed that the, of which Diseases of the Nervous System and, Diseases of the Circulatory System had the greatest agreement 1.0 and 0.87 repectively, Disorders of the Visual Sensory System - Eyes and Respiratory System Disorder showed the highest agreement of use. Most of the species cited by the key informants are well known scientifically, but it is interesting that some have been studied little or not all with regard to confirming their purported medicinal properties and can contribute substantially to pharmacological

  4. Assessing the extent of "conflict of use" in multipurpose tropical forest trees: a regional view.

    Science.gov (United States)

    Herrero-Jáuregui, Cristina; Guariguata, Manuel R; Cárdenas, Dairon; Vilanova, Emilio; Robles, Marco; Licona, Juan Carlos; Nalvarte, Walter

    2013-11-30

    In the context of multiple forest management, multipurpose tree species which provide both timber and non-timber forest products (NTFP), present particular challenges as the potential of conflicting use for either product may be high. One key aspect is that the magnitude of conflict of use can be location specific, thus adding complexity to policy development. This paper focuses on the extent to which the potential for conflict of use in multipurpose tree species varies across the Amazonian lowland forests shared by Peru, Bolivia, Colombia, Ecuador and Venezuela, emphasizing the economic dimension of conflict. Based on a review of the current normative and regulatory aspects of timber and NTFP extraction in the five countries, the paper also briefly discusses the opportunities and constraints for harmonization of timber and NTFP management of multipurpose species across the region. It was found that about half of the 336 timber species reviewed across the five countries also have non-timber uses. Eleven timber species are multipurpose in all five countries: Calophyllum brasiliense, Cedrela odorata, Ceiba pentandra, Clarisia racemosa, Ficus insipida, Jacaranda copaia, Schefflera morototoni, Simarouba amara and Terminalia amazonia. Seven other multipurpose species occurred only in either Venezuela (Tabebuia impetiginosa, Spondias mombin, Pentaclethra macroloba, Copaifera officinalis, Chlorophora tinctoria, Carapa guianensis) or Ecuador (Tabebuia chrysantha). Four multipurpose tree species presented the highest potential of conflict of use across the region: Dipteryx odorata, Tabebuia serratifolia, Hymenaea courbaril and Myroxylon balsamum yet these were not evenly distributed across all five countries. None of the five studied countries have specific legislation to promote sustainable use of any of the multipurpose species reported here and thus mitigate potential conflict of use; nor documented management options for integration or else segregation of both their

  5. The profile of Brazilian agriculture as source of raw material to obtain organic cosmetics

    Directory of Open Access Journals (Sweden)

    Neila de Paula Pereira

    2017-05-01

    Full Text Available With one of the most notable floras in the world for sustainable research, the Brazilian Amazon region currently counts on financial incentives from the Brazilian Government for private national and foreign businesses. The ongoing implantation of a Biocosmetics Research and Development Network (REDEBIO aims to stimulate research involving natural resources from the Brazilian states that make up the zone defined as “Amazônia Legal”. The objective of this region, still under development in Brazil, is principally to aggregate value to products manufactured in small local industries through the use of sustainable technology currently being established. Certain certified raw materials already included in the country’s sustainability program, have also begun to be cultivated according to the requirements of organic cultivation (Neves, 2009. The majority are species of Amazonian vegetation: Euterpe oleracea (Açai, Orbignya martiana (Babaçu, Theobroma grandi-florum (Cupuaçu, Carapas guianensis (Andiroba, Pentaclethra macroloba (Pracaxi, Copaifera landesdorffi (Copaiba, Platonia insignis (Bacuri, Theobroma cacao (Cacao, Virola surinamensis (Ucuuba and Bertholletia excelsa (Brazil nut. These generate phytopreparations, such as oils, extracts, and dyes that are widely used in the manufacture of Brazilian organic cosmetics with scientifically proven topical and capillary benefits. In the final balance, Brazilian organic cosmetics should continue to gain force over the next few years, especially with the regulation of the organic cosmetics market that is being drafted by the Brazilian Ministry of Agriculture. Moreover, lines of ecologically aware products that provide quality of life for both for rural and metropolitan communities show a tendency to occupy greater space in the market.

  6. Performance of candidate gas turbine abradeable seal materials in high temperature combustion atmospheres

    Energy Technology Data Exchange (ETDEWEB)

    Simms, N.J. [Cranfield University, Power Generation Technology Centre, Cranfield, Beds, MK43 0AL (United Kingdom); Norton, J.F. [Cranfield University, Power Generation Technology Centre, Cranfield, Beds, MK43 0AL (United Kingdom); Consultant in Corrosion Science and Technology, Hemel Hempstead, Herts HP1 1SR (United Kingdom); McColvin, G. [Siemens Industrial Turbines Ltd., Lincoln, LN5 7FD (United Kingdom)

    2005-11-01

    The development of abradeable gas turbine seals for higher temperature duties has been the target of an EU-funded R and D project, ADSEALS, with the aim of moving towards seals that can withstand surface temperatures as high as {proportional_to} 1100 C for periods of at least 24,000 h. The ADSEALS project has investigated the manufacturing and performance of a number of alternative materials for the traditional honeycomb seal design and novel alternative designs. This paper reports results from two series of exposure tests carried out to evaluate the oxidation performance of the seal structures in combustion gases and under thermal cycling conditions. These investigations formed one part of the evaluation of seal materials that has been carried out within the ADSEALS project. The first series of three tests, carried out for screening purposes, exposed candidate abradeable seal materials to a simulated natural gas combustion environment at temperatures within the range 1050-1150 C in controlled atmosphere furnaces for periods of up to {proportional_to} 2,500 h with fifteen thermal cycles. The samples were thermally cycled to room temperature on a weekly basis to enable the progress of the degradation to be monitored by mass change and visual observation, as well as allowing samples to be exchanged at planned intervals. The honeycombs were manufactured from PM2000 and Haynes 214. The backing plates for the seal constructions were manufactured from Haynes 214. Some seals contained fillers or had been surface treated (e.g. aluminised). The second series of three tests were carried out in a natural gas fired ribbon furnace facility that allowed up to sixty samples of candidate seal structures (including honeycombs, hollow sphere structures and porous ceramics manufactured from an extended range of materials including Aluchrom YHf, PM2Hf, Haynes 230, IN738LC and MarM247) to be exposed simultaneously to a stream of hot combustion gas. In this case the samples were cooled

  7. Microstructural Evolution and Creep-Rupture Behavior of Fusion Welds Involving Alloys for Advanced Ultrasupercritical Power Generation

    Science.gov (United States)

    Bechetti, Daniel H., Jr.

    Projections for large increases in the global demand for electric power produced by the burning of fossil fuels, in combination with growing environmental concerns surrounding these fuel sources, have sparked initiatives in the United States, Europe, and Asia aimed at developing a new generation of coal fired power plant, termed Advanced Ultrasupercritical (A-USC). These plants are slated to operate at higher steam temperatures and pressures than current generation plants, and in so doing will offer increased process cycle efficiency and reduced greenhouse gas emissions. Several gamma' precipitation strengthened Ni-based superalloys have been identified as candidates for the hottest sections of these plants, but the microstructural instability and poor creep behavior (compared to wrought products) of fusion welds involving these alloys present significant hurdles to their implementation and a gap in knowledge that must be addressed. In this work, creep testing and in-depth microstructural characterization have been used to provide insight into the long-term performance of these alloys. First, an investigation of the weld metal microstructural evolution as it relates to creep strength reductions in A-USC alloys INCONELRTM 740, NIMONICRTM 263 (INCONEL and NIMONIC are registered trademarks of Special Metals Corporation), and HaynesRTM 282RTM (Haynes and 282 are registered trademarks of Haynes International) was performed. gamma'-precipitate free zones were identified in two of these three alloys, and their development was linked to the evolution of phases that precipitate at the expense of gamma'. Alloy 282 was shown to avoid precipitate free zone formation because the precipitates that form during long term aging in this alloy are poor in the gamma'-forming elements. Next, the microstructural evolution of INCONELRTM 740H (a compositional variant of alloy 740) during creep was investigated. Gleeble-based interrupted creep and creep-rupture testing was used to

  8. Materials for advanced ultrasupercritical steam turbines

    Energy Technology Data Exchange (ETDEWEB)

    Purgert, Robert [Energy Industries Of Ohio Inc., Independence, OH (United States); Shingledecker, John [Energy Industries Of Ohio Inc., Independence, OH (United States); Saha, Deepak [Energy Industries Of Ohio Inc., Independence, OH (United States); Thangirala, Mani [Energy Industries Of Ohio Inc., Independence, OH (United States); Booras, George [Energy Industries Of Ohio Inc., Independence, OH (United States); Powers, John [Energy Industries Of Ohio Inc., Independence, OH (United States); Riley, Colin [Energy Industries Of Ohio Inc., Independence, OH (United States); Hendrix, Howard [Energy Industries Of Ohio Inc., Independence, OH (United States)

    2015-12-01

    The U.S. Department of Energy (DOE) and the Ohio Coal Development Office (OCDO) have sponsored a project aimed at identifying, evaluating, and qualifying the materials needed for the construction of the critical components of coal-fired power plants capable of operating at much higher efficiencies than the current generation of supercritical plants. This increased efficiency is expected to be achieved principally through the use of advanced ultrasupercritical (A-USC) steam conditions. A limiting factor in this can be the materials of construction for boilers and for steam turbines. The overall project goal is to assess/develop materials technology that will enable achieving turbine throttle steam conditions of 760°C (1400°F)/35MPa (5000 psi). This final technical report covers the research completed by the General Electric Company (GE) and Electric Power Research Institute (EPRI), with support from Oak Ridge National Laboratory (ORNL) and the National Energy Technology Laboratory (NETL) – Albany Research Center, to develop the A-USC steam turbine materials technology to meet the overall project goals. Specifically, this report summarizes the industrial scale-up and materials property database development for non-welded rotors (disc forgings), buckets (blades), bolting, castings (needed for casing and valve bodies), casting weld repair, and casting to pipe welding. Additionally, the report provides an engineering and economic assessment of an A-USC power plant without and with partial carbon capture and storage. This research project successfully demonstrated the materials technology at a sufficient scale and with corresponding materials property data to enable the design of an A-USC steam turbine. The key accomplishments included the development of a triple-melt and forged Haynes 282 disc for bolted rotor construction, long-term property development for Nimonic 105 for blading and bolting, successful scale-up of Haynes 282 and Nimonic 263 castings using

  9. NEOEVOLUCIONISMO Y ECOLOGÍA CULTURAL. LA OBRA DE JULIAN STEWARD Y LA RENOVACIÓN DE LA ENSEÑANZA DE LA ANTROPOLOGÍA EN LA ARGENTINA / Neo-evolutionism and cultural ecology. The Argentine Renovation of Anthropology Teaching under the influence of J. Steward

    Directory of Open Access Journals (Sweden)

    Gastón Julián Gil

    2010-12-01

    Full Text Available La introducción de la obra del antropólogo norteamericano Julian Haynes Steward (1902-1972 produjo una parcial renovación de la enseñanza de la antropología en la Argentina desde mediados de la década del cincuenta. Principalmente en arqueología (y más tarde en lo que comenzaría a llamarse antropología social, el enfoque materialista, neoevolucionista y ecológico entró en tensión con la corriente histórico-cultural alemana que había hegemonizado el campo antropológico nacional liderado por el italiano José Imbelloni desde la Universidad de Buenos Aires. La circulación de estas nuevas ideas -que también provocaron fuertes polémicas en su ámbito de gestación original- es abordada principalmente a partir de la labor transformadora y revitalizadora de Alberto Rex González, posgraduado en la Universidad de Columbia y alumno de Steward a fines de los años cuarenta. De este modo, se propone un análisis de las maneras en que nuevos postulados conceptuales provenientes de una tradición metropolitana se difundieron en un contexto periférico.Palabras Clave: Antropología argentina; Neoevolucionismo; Ecología cultural; UniversidadAbstractThe introduction of the U.S. anthropologist Julian Haynes Steward (1902-1972 to the Argentine courses of Anthropology in the mid-50´s, launched a process of partial renovation in Argentine anthropology.  His materialistic, neoevolutionist, and ecological scope applied to Archeology and, later, to what would become Social Anthropology, differed from more established views such as German historical-cultural theory led by Italian anthropologist José Imbelloni and Austrian archaeologist Oswald Menghin. This paper describes and analyzes the arrival of Steward’s ideas to some Argentine schools of Anthropology (Córdoba, Litoral/Rosario and La Plata in the late 40s, by means of archaeologist Alberto Rex González, a Columbia Ph.D. and one of Steward’s students. In fact, studying Steward

  10. Associação micorízica em espécies arbóreas, atividade microbiana e fertilidade do solo em áreas degradadas de cerrado

    Directory of Open Access Journals (Sweden)

    Márcia Helena Scabora

    2011-06-01

    Full Text Available A recuperação de áreas de obras das barragens, em especial de "áreas de empréstimos", é difícil e consiste em um processo lento, visto que toda a vegetação e a camada fértil do solo foram removidas. Intervenções nessas áreas poderiam acelerar o processo de revegetação. O presente trabalho teve como objetivo avaliar a associação de fungos micorrízicos arbusculares (FMA em espécies arbóreas, atividade microbiana pela respiração basal e fertilidade em áreas degradadas de cerrado. Utilizou-se solo de duas áreas, solo de pastagem e subsolo exposto. Adubações orgânica e mineral, além da calagem, foram efetuadas nas covas, visando a um melhor crescimento inicial das mudas, assim como, 50 mL de solo de cerrado preservado como inoculante de microrganismos. Mudas de 11 espécies arbóreas foram plantadas ou seja: Anadenanthera falcata (Benth. Speg. (angico-preto, Acacia polyphylla D.C. (monjoleiro, Stryphnodendron adstringens (Mart. Coville (barbatimão, Dimorphandra mollis Benth (faveiro, Hymenaea stigonocarpa Mart. ex Hayne (jatobá-de-cerrado, Dipteryx alata Vog. (baru, Machaerium acutifolium Vogel (jacarandá-do-campo, Schinus terebinthifolia Raddi (aroeira-pimenteira, Magonia pubescens St. Hil. (tingui, Lafoensia pacari St. Hil. (dedaleira e Tabebuia aurea (Manso Benth. & Hook. (ipê-amarelo. Doze meses após a instalação do experimento, amostras de raízes foram coletadas na camada de 0-0,10 m para as avaliações. O subsolo, em relação ao solo de pastagem, continuou pobre em matéria orgânica e com menor atividade microbiana. As maiores porcentagens de colonização micorrízica por FMA foram observados nas espécies Acacia polyphylla D.C. (monjoleiro, Magonia pubescens St. Hil. (tingui, Hymenaea stigonocarpa Mart. ex Hayne (jatobá-de-cerrado e Schinus terebinthifolia Raddi (aroeira-pimenteira. Tais espécies podem ser indicadas para projetos de revegetação em áreas degradadas de cerrado. As plantas das duas

  11. Micorrizas arbusculares no crescimento pós-transplantio de mudas de árvores em solo com excesso de metais pesados

    Directory of Open Access Journals (Sweden)

    J. O. Siqueira

    1999-09-01

    Full Text Available Os efeitos adversos dos metais pesados para as diversas formas de vida dificultam a recuperação de solos contaminados por estes elementos. Neste trabalho, avaliaram-se os efeitos da inoculação com fungos micorrízicos arbusculares no crescimento e absorção de metais de mudas de cinco espécies arbóreas, transplantadas para misturas que continham diferentes proporções de um solo contaminado (PSC. Mudas de Senna multijuga (L.C. Rich. Irwin et Barneby (cássia verrugosa, Luehea grandiflora Mart. et Zucc. (açoita-cavalo, Enterolobium contortisiliquum (Vell. Morong (tamboril, Albizia lebbeck (L. Benth. (albizia e Senna macranthera (Collard. Irwin et Barneby (fedegoso, inoculadas e sem inoculação, foram transplantadas para as misturas de solos e desenvolvidas por 180 dias, no período de abril a novembro de 1996, em vasos, em casa de vegetação do Departamento de Ciência do Solo da UFLA, Lavras (MG. Verificou-se que a elevação na PSC na mistura reduziu o desenvolvimento das mudas e a colonização micorrízica (CM, sendo isto causado pela elevada absorção de metais pelas plantas, especiamente, de Cd e Zn. A inoculação favoreceu o crescimento das mudas após transplantio, sendo esse efeito mais evidente nas misturas de solo com baixa PSC. A CM foi reduzida de 70 a 90% no solo não contaminado para valores próximos de zero na mistura com alta PSC. Os níveis críticos de toxidez (redução de 10% na matéria seca das plantas inoculadas dos metais no solo foram, em mg dm-3, de 83, 57, 153, 256 e 16, para o Zn, e de 1,3; 0,9; 0,8; 4,0 e 1,6, para Cd, para açoita-cavalo, cássia verrugosa, fedegoso, tamboril e albizia, respectivamente. Observando esses níveis críticos, as plantas não inoculadas apresentaram produção de matéria seca relativa, média para todas as espécies, de apenas 39%, evidenciando os benefícios da inoculação para o crescimento pós-transplantio das mudas. Esses benefícios relacionaram-se com menores

  12. Pressure vessel code construction capabilities for a nickel-chromium-tungsten-molybdenum alloy

    International Nuclear Information System (INIS)

    Rothman, M.F.

    1990-01-01

    HAYNES alloy 230 (UNS NO6230) has achieved wide usage in a variety of high-temperature aerospace, chemical process industry and industrial heating applications since its introduction in 1981. Combining high elevated temperature strength with excellent metallurgical stability, environment-resistance and relatively straight forward fabrication characteristics, this Ni-Cr-W-Mo alloy was an excellent candidate for ASME Pressure vessel Code applications. Coverage under case No. 2063 was granted in July, 1989, for both Section I and Section VIII Division 1 construction. In this paper, the metallurgy of 230 alloy will be described, and its design strength capabilities contrasted with those for more established code materials. Other important performance capabilities, such as long-term thermal stability, oxidation-resistance, fatigue-resistance, and resistance to other forms of environmental degradation will be discussed. It will be shown that the combined properties of 230 alloy offer some significant advantages over other materials for applications such as expansion bellows, heat-exchangers, valves and other components in the fossil energy, nuclear energy and chemical process industries, among others

  13. Modeling the rubbing contact in honeycomb seals

    Science.gov (United States)

    Fischer, Tim; Welzenbach, Sarah; Meier, Felix; Werner, Ewald; kyzy, Sonun Ulan; Munz, Oliver

    2018-03-01

    Metallic honeycomb labyrinth seals are commonly used as sealing systems in gas turbine engines. Because of their capability to withstand high thermo-mechanical loads and oxidation, polycrystalline nickel-based superalloys, such as Hastelloy X and Haynes 214, are used as sealing material. In addition, these materials must exhibit a tolerance against rubbing between the rotating part and the stationary seal component. The tolerance of the sealing material against rubbing preserves the integrity of the rotating part. In this article, the rubbing behavior at the rotor-stator interface is considered numerically. A simulation model is incorporated into the commercial finite element code ABAQUS/explicit and is utilized to simulate a simplified rubbing process. A user-defined interaction routine between the contact surfaces accounts for the thermal and mechanical interfacial behavior. Furthermore, an elasto-plastic constitutive material law captures the extreme temperature conditions and the damage behavior of the alloys. To validate the model, representative quantities of the rubbing process are determined and compared with experimental data from the literature. The simulation results correctly reproduce the observations made on a test rig with a reference stainless steel material (AISI 304). A parametric study using the nickel-based superalloys reveals a clear dependency of the rubbing behavior on the sliding and incursion velocity. Compared to each other, the two superalloys studied exhibit a different rubbing behavior.

  14. The assessment of the HSR impacts on Spanish tourism: an approach based on multivariate panel data analysis

    Energy Technology Data Exchange (ETDEWEB)

    Guirao Abad, B.

    2016-07-01

    Literature review shows that little research has done so far to estimate how tourism indicators are affected by new HSR lines. In 2012, a multivariate panel analysis developed by Chen and Haynes was applied to the Chinese regions to quantify the HSR impact on tourism output. The Chinese experience confirmed that, during the period 1999-2010, emerging high speed rail services did have significant positive impacts on boosting tourism in China. Since them, no similar empirical tool has ever been tested in Europe. The aim of this paper is to analyze and validate the suitability of this tool to assess empirically the effects of HSR on Spanish tourism during the period 1999-2014, and to enhance the abovementioned model with a tourism database. With more than 20 years’ HSR experience, and operating the longest HSR network in Europe (2,900 km), Spain offers a good scenario for this model application because Spanish tourism sector represents 10.2% of its gross domestic product (GDP). Results clearly show that there is a direct linkage between the evolution of certain Spanish tourism outputs and the construction of the HSR network. However, authors´ recommendations include future new research on some variables limitations like the type of tourism output considered or the consideration. (Author)

  15. The assessment of the HSR impacts on Spanish tourism: an approach based on multivariate panel data analysis

    International Nuclear Information System (INIS)

    Guirao Abad, B.

    2016-01-01

    Literature review shows that little research has done so far to estimate how tourism indicators are affected by new HSR lines. In 2012, a multivariate panel analysis developed by Chen and Haynes was applied to the Chinese regions to quantify the HSR impact on tourism output. The Chinese experience confirmed that, during the period 1999-2010, emerging high speed rail services did have significant positive impacts on boosting tourism in China. Since them, no similar empirical tool has ever been tested in Europe. The aim of this paper is to analyze and validate the suitability of this tool to assess empirically the effects of HSR on Spanish tourism during the period 1999-2014, and to enhance the abovementioned model with a tourism database. With more than 20 years’ HSR experience, and operating the longest HSR network in Europe (2,900 km), Spain offers a good scenario for this model application because Spanish tourism sector represents 10.2% of its gross domestic product (GDP). Results clearly show that there is a direct linkage between the evolution of certain Spanish tourism outputs and the construction of the HSR network. However, authors´ recommendations include future new research on some variables limitations like the type of tourism output considered or the consideration. (Author)

  16. Bimetallic low thermal-expansion panels of Co-base and silicide-coated Nb-base alloys for high-temperature structural applications

    International Nuclear Information System (INIS)

    Rhein, R.K.; Novak, M.D.; Levi, C.G.; Pollock, T.M.

    2011-01-01

    Research highlights: → Low net thermal expansion bimetallic structural lattice constructed. → Temperatures on the order of 1000 deg. C reached. → Improved silicide coating for niobium alloy developed. - Abstract: The fabrication and high temperature performance of low thermal expansion bimetallic lattices composed of Co-base and Nb-base alloys have been investigated. A 2D sheet lattice with a coefficient of thermal expansion (CTE) lower than the constituent materials of construction was designed for thermal cycling to 1000 deg. C with the use of elastic-plastic finite element analyses. The low CTE lattice consisted of a continuous network of the Nb-base alloy C-103 with inserts of high CTE Co-base alloy Haynes 188. A new coating approach wherein submicron alumina particles were incorporated into (Nb, Cr, Fe) silicide coatings was employed for oxidation protection of the Nb-base alloy. Thermal gravimetric analysis results indicate that the addition of submicron alumina particles reduced the oxidative mass gain by a factor of four during thermal cycling, increasing lifetime. Bimetallic cells with net expansion of 6 x 10 -6 /deg. C and 1 x 10 -6 /deg. C at 1000 deg. C were demonstrated and their measured thermal expansion characteristics were consistent with analytical models and finite element analysis predictions.

  17. WebSPIT

    International Nuclear Information System (INIS)

    Wilk, Philip A.

    2001-01-01

    SPIT is an adaptation by John Wild [Wild 1988] of a neutron evaporation code that has been in circulation around LBNL and LLNL. It is a program for calculating fusion product cross sections for reactions that de-excite through neutron emission. It was originally written in FORTRAN for the VAX microcomputer. It is related closely to another neutron evaporation code JORPLE written by Jose Alonso [Alonso 1974]. SPIT uses a different set of potentials and does a better job of reproducing the excitation function shapes than JORPLE, though both predict approximately the same excitation peak energy. The main difference [Haynes 1988] between the two programs is that JORPLE uses a standard Coulomb potential and the Woods-Saxon potential, while SPIT uses a Bondorf, Sobel, and Sperber coulomb potential [Bondorf 1974] and the Bass proximity potential [Bass 1974]. Our group, the Heavy Element Nuclear and Radiochemistry Group, here at LBNL has made extensive use of this code for estimating reaction cross sections for experiments that are to be performed at the 88-Inch cyclotron. It requires no calculation parameters aside from the Z and A of the projectile and target nucleus, and this feature has allowed us to use it in a consistent manner for experiments here for over ten years. The cross sections that are calculated with SPIT are consistently within an order of magnitude of those experimentally observed

  18. THE EFFECTS OF EARNINGS MANAGEMENT ON ACCOUNTING CONSERVATISM MODERATED BY CORPORATE GOVERNANCE MECHANISM (STUDY OF MANUFACTURING COMPANIES LISTEDON INDONESIA STOCK EXCHANGEIN 2008 – 2010

    Directory of Open Access Journals (Sweden)

    AMMAR AL ASYARI

    2013-07-01

    Full Text Available This study aimsto examine earnings management by companies manufacturing in Indonesia affect the choice of managers to implement aconservative accounting policy. With corporate governance mechanisms in influencing the relationship of Earning Management on Accounting Conservatism. Methods of analysis using multiple linear regression analysis with one independent variable, one dependent variable and two variables moderation. Corporate governance mechanismuses two characteristics as moderating variables, managerial ownership and board of commissioners. Size using the accrua lconservatism, according to those used by Givolyand Hayn (2002 and discretionary accruals as aproxy for earnings management is computed using the Modified Jones Model (Dechow etal., 1995. By using the purposive sampling method, the sample in this research consists of 23 manufacturing companies that listed on Indonesia Stock Exchange in 2008 – 2010. This research use secondary data which is collected from the firm’s annual report and financial statements. The result of this research shows that simultaneously, earning management, managerial ownership, and board of commissioners influence accounting conservatism. Partially, only earning management that significantly influences accounting conservatism. While managerial ownership and board of commissioners do not significantly influence the relationship of Earning Management on Accounting Conservatism.

  19. Spectral emissivity measurements of candidate materials for very high temperature reactors

    Energy Technology Data Exchange (ETDEWEB)

    Cao, G.; Weber, S.J.; Martin, S.O.; Anderson, M.H. [Department of Engineering Physics, University of Wisconsin, 1500 Engineering Drive, Madison, WI (United States); Sridharan, K., E-mail: kumars@cae.wisc.edu [Department of Engineering Physics, University of Wisconsin, 1500 Engineering Drive, Madison, WI (United States); Allen, T.R. [Department of Engineering Physics, University of Wisconsin, 1500 Engineering Drive, Madison, WI (United States)

    2012-10-15

    Heat dissipation by radiation is an important consideration in VHTR components, particularly the reactor pressure vessel (RPV), because of the fourth power temperature dependence of radiated heat. Since emissivity is the material property that dictates the ability to radiate heat, measurements of emissivities of materials that are being specifically considered for the construction of VHTR become important. Emissivity is a surface phenomenon and therefore compositional, structural, and topographical changes that occur at the surfaces of these materials as a result of their interactions with the environment at high temperatures will alter their emissivities. With this background, an experimental system for the measurement of spectral emissivity has been designed and constructed. The system has been calibrated in conformance with U.S. DoE quality assurance standards using inert ceramic materials, boron nitride, silicon carbide, and aluminum oxide. The results of high temperature emissivity measurements of potential VHTR materials such as ferritic steels SA 508, T22, T91 and austenitic alloys IN 800H, Haynes 230, IN 617, and 316 stainless steel have been presented.

  20. The topology of large-scale structure. III. Analysis of observations

    International Nuclear Information System (INIS)

    Gott, J.R. III; Weinberg, D.H.; Miller, J.; Thuan, T.X.; Schneider, S.E.

    1989-01-01

    A recently developed algorithm for quantitatively measuring the topology of large-scale structures in the universe was applied to a number of important observational data sets. The data sets included an Abell (1958) cluster sample out to Vmax = 22,600 km/sec, the Giovanelli and Haynes (1985) sample out to Vmax = 11,800 km/sec, the CfA sample out to Vmax = 5000 km/sec, the Thuan and Schneider (1988) dwarf sample out to Vmax = 3000 km/sec, and the Tully (1987) sample out to Vmax = 3000 km/sec. It was found that, when the topology is studied on smoothing scales significantly larger than the correlation length (i.e., smoothing length, lambda, not below 1200 km/sec), the topology is spongelike and is consistent with the standard model in which the structure seen today has grown from small fluctuations caused by random noise in the early universe. When the topology is studied on the scale of lambda of about 600 km/sec, a small shift is observed in the genus curve in the direction of a meatball topology. 66 refs

  1. The topology of large-scale structure. III - Analysis of observations

    Science.gov (United States)

    Gott, J. Richard, III; Miller, John; Thuan, Trinh X.; Schneider, Stephen E.; Weinberg, David H.; Gammie, Charles; Polk, Kevin; Vogeley, Michael; Jeffrey, Scott; Bhavsar, Suketu P.; Melott, Adrian L.; Giovanelli, Riccardo; Hayes, Martha P.; Tully, R. Brent; Hamilton, Andrew J. S.

    1989-05-01

    A recently developed algorithm for quantitatively measuring the topology of large-scale structures in the universe was applied to a number of important observational data sets. The data sets included an Abell (1958) cluster sample out to Vmax = 22,600 km/sec, the Giovanelli and Haynes (1985) sample out to Vmax = 11,800 km/sec, the CfA sample out to Vmax = 5000 km/sec, the Thuan and Schneider (1988) dwarf sample out to Vmax = 3000 km/sec, and the Tully (1987) sample out to Vmax = 3000 km/sec. It was found that, when the topology is studied on smoothing scales significantly larger than the correlation length (i.e., smoothing length, lambda, not below 1200 km/sec), the topology is spongelike and is consistent with the standard model in which the structure seen today has grown from small fluctuations caused by random noise in the early universe. When the topology is studied on the scale of lambda of about 600 km/sec, a small shift is observed in the genus curve in the direction of a 'meatball' topology.

  2. The topology of large-scale structure. III - Analysis of observations. [in universe

    Science.gov (United States)

    Gott, J. Richard, III; Weinberg, David H.; Miller, John; Thuan, Trinh X.; Schneider, Stephen E.

    1989-01-01

    A recently developed algorithm for quantitatively measuring the topology of large-scale structures in the universe was applied to a number of important observational data sets. The data sets included an Abell (1958) cluster sample out to Vmax = 22,600 km/sec, the Giovanelli and Haynes (1985) sample out to Vmax = 11,800 km/sec, the CfA sample out to Vmax = 5000 km/sec, the Thuan and Schneider (1988) dwarf sample out to Vmax = 3000 km/sec, and the Tully (1987) sample out to Vmax = 3000 km/sec. It was found that, when the topology is studied on smoothing scales significantly larger than the correlation length (i.e., smoothing length, lambda, not below 1200 km/sec), the topology is spongelike and is consistent with the standard model in which the structure seen today has grown from small fluctuations caused by random noise in the early universe. When the topology is studied on the scale of lambda of about 600 km/sec, a small shift is observed in the genus curve in the direction of a 'meatball' topology.

  3. Distribution and infestation levels of Crypticerya multicicatrices Kondo and Unruh (Hemiptera: Monophlebidae on San Andrés island

    Directory of Open Access Journals (Sweden)

    Takumasa Kondo Kondo

    2014-01-01

    Full Text Available The fluted scale Crypticerya multicicatrices (Hemiptera: Monophlebidae is an invasive insect that became a major pest on the island of San Andrés. To generate control strategies for this insect, its distribution and infestation levels on palm species, fruit trees, leguminous trees and other plant species were determined during January 14–18, 2013. A total of 96 points were sampled in order to determine the distribution of the insect on the island. During the study, the fluted scale was found distributed throughout the island of San Andrés, including Haynes Cay and Johnny Cay. The palms were the plants with the highest levels of infestation, 70.8% had some degree of infestation (37.5% high infestation levels; followed by fruit trees which had 65.6% with some degree of infestation (30.2% high infestation levels; followed by leguminous trees which had 59.6% with some degree of infestation (13.5% high infestation levels and finally “other hosts” which had 51.1% with some level of infestation (11.5% high infestation levels. This study is the first detailed mapping of C. multicicatrices on the island of San Andrés which will become the basis for future work on the population dynamics of the fluted scale and its distribution on the island.

  4. On the Explicit Expression for Plasma Layer Thickness

    CERN Document Server

    Sharma, R K

    2004-01-01

    The marginal zone theory is used to account for the observed Fahreus Linquist effect when the viscoity of blood changes with the diameter of the capillary. An attributable cause is the axial accumulation of cells. The discharge rate from Hagen Poiseulle law at steady state was derived by Haynes (1960) for the core and plasma layer and a total discharge rate was expressed as a function of the pressure drop along the capillary, quartic dependence on the radius of the capillary and quartic dependence on the dimensionless marginal zone thickness. The apparent of viscosity of the blood is expressed as a function of the ratio of the core layer viscosity and the plasma layer viscosity. In order to back out a marginal zone thickness from a given set of information, the Charm and Kurland expression (1974) for the viscosity and hematocrit variation and the temperature dependence parameter of the hematocrit alpha can be used to develop two transcendental equations and two un! knowns. This is the recommended procedure us...

  5. On a Explicit Expresion for Plasma Layer Thickness

    CERN Document Server

    Sharma, R K

    2004-01-01

    The marginal zone theory is used to account for the observed Fahreus Linquist effect when the viscoity of blood changes with the diameter of the capillary. An attributable cause is the axial accumulation of cells. The discharge rate from Hagen Poiseulle law at steady state was derived by Haynes (1960) for the core and plasma layer and a total discharge rate was expressed as a function of the pressure drop along the capillary, quartic dependence on the radius of the capillary and quartic dependence on the dimensionless marginal zone thickness. The apparent of viscosity of the blood is expressed as a function of the ratio of the core layer viscosity and the plasma layer viscosity. In order to back out a marginal zone thickness from a given set of information, the Charm and Kurland expression (1974) for the viscosity and hematocrit variation and the temperature dependence parameter of the hematocrit alpha can be used to develop two transcendental equations and two un! knowns. This is the recommended procedure us...

  6. Mechanisms of oxide layer formation and destruction on a chromia former nickel base alloy in HTR environment; Mecanismes de formation et de destruction de la couche d'oxyde sur un alliage chrominoformeur en milieu HTR

    Energy Technology Data Exchange (ETDEWEB)

    Rouillard, F

    2007-10-15

    Haynes 230 alloy which contains 22 wt.% chromium could be a promising candidate material for structures and heat exchangers (maximum operating temperature: 850-950 C) in Very High Temperature Reactors (VHTR). The feasibility demonstration involves to valid its corrosion resistance in the reactor specific environment namely impure helium. The alloys surface reactivity was investigated at temperatures between 850 and 1000 C. We especially focused on the influence of different parameters such as concentrations of impurities in the gas phase (carbon monoxide and methane, water vapour/hydrogen ratio), alloy composition (activities of Cr and C, alloying element contents) and temperature. Two main behaviours have been revealed: the formation of a Cr/Mn rich oxide layer at 900 C and its following reduction at higher temperatures. At 900 C, the water vapour is the main oxidizing gas. However in the initial times, the carbon monoxide reacts at the metal/oxide interface which involves a gaseous transport through the scale; CO mainly oxidizes the minor alloying elements aluminium and silicon. Above a critical temperature TA, the carbon in solution in the alloy reduces chromia. To ascribe the scale destruction, a model is proposed based on thermodynamic interfacial data for the alloy, oxide layer morphology and carbon monoxide partial pressure in helium; the model is then validated regarding experimental results and observations. (author)

  7. Gas Turbine High Temperature Gas (Helium) Reactor Using Pebble Bed Fuel Derived from Spent Fuel

    International Nuclear Information System (INIS)

    Cole, Quentin

    2013-01-01

    Project goals: Build on the $1B investment spent during the NGNP Project for the only true Inherently Safe Small Modular Reactor Design – the only SMR design that can make this claim due to negative temperature coefficient of reactivity - no containment required – less construction cost. NPMC in Partnership with Pebble Bed Modular Group, a fully owned subsidiary of Eskom, RSA to Factory Build Complete Plant in Modular Sections at Factory Site in Oswego, NY for transport to site by rail or shipping for world wide export. NPMC will provide Project and Construction Management of all new builds from plant sites through construction, commissioning and startup using local labor. License and Construct ion of spent fuel processing facility in both NY and South Africa using Proven Technology. Ultimate goals of project: 1. Award of the 2013 US DOE Innovative SMR $452M cost share grant for US NRC License Certification 2.Build Full Scale Demonstration Plant at Koeburg, RSA with World Bank Funding managed by NPMC in collaboration with our legal firm, Haynes and Boone LLP 3. Take Plant Orders Immediately (10% Down Payment) 4. Form Strategic Alliance with Domestic and/or International Utility

  8. Kinetics of Grain Growth in 718 Ni-Base Superalloy

    Directory of Open Access Journals (Sweden)

    Huda Z.

    2014-10-01

    Full Text Available The Haynes® 718 Ni-base superalloy has been investigated by use of modern material characterization, metallographic and heat treatment equipment. Grain growth annealing experiments at temperatures in the range of 1050 – 1200 oC (1323–1473K for time durations in the range of 20 min-22h have been conducted. The kinetic equations and an Arrhenius-type equation have been applied to compute the grain-growth exponent n and the activation energy for grain growth, Qg, for the investigated alloy. The grain growth exponent, n, was computed to be in the range of 0.066-0.206; and the n values have been critically discussed in relation to the literature. The activation energy for grain growth, Qg, for the investigated alloy has been computed to be around 440 kJ/mol; and the Qg data for the investigated alloy has been compared with other metals and alloys and ceramics; and critically analyzed in relation to our results.

  9. Modeling Long-term Creep Performance for Welded Nickel-base Superalloy Structures for Power Generation Systems

    Energy Technology Data Exchange (ETDEWEB)

    Shen, Chen [GE Global Research, NIskayuna, NY (United States); Gupta, Vipul [GE Global Research, NIskayuna, NY (United States); Huang, Shenyan [GE Global Research, NIskayuna, NY (United States); Soare, Monica [GE Global Research, NIskayuna, NY (United States); Zhao, Pengyang [GE Global Research, NIskayuna, NY (United States); Wang, Yunzhi [GE Global Research, NIskayuna, NY (United States)

    2017-02-28

    The goal of this project is to model long-term creep performance for nickel-base superalloy weldments in high temperature power generation systems. The project uses physics-based modeling methodologies and algorithms for predicting alloy properties in heterogeneous material structures. The modeling methodology will be demonstrated on a gas turbine combustor liner weldment of Haynes 282 precipitate-strengthened nickel-base superalloy. The major developments are: (1) microstructure-property relationships under creep conditions and microstructure characterization (2) modeling inhomogeneous microstructure in superalloy weld (3) modeling mesoscale plastic deformation in superalloy weld and (4) a constitutive creep model that accounts for weld and base metal microstructure and their long term evolution. The developed modeling technology is aimed to provide a more efficient and accurate assessment of a material’s long-term performance compared with current testing and extrapolation methods. This modeling technology will also accelerate development and qualification of new materials in advanced power generation systems. This document is a final technical report for the project, covering efforts conducted from October 2014 to December 2016.

  10. Impact of selected parameters on the development of boiling and flow resistance in the minichannel

    Directory of Open Access Journals (Sweden)

    Piasecka Magdalena

    2015-01-01

    Full Text Available The paper presents results of flow boiling in a rectangular minichannel 1 mm deep, 40 mm wide and 360 mm long. The heating element for FC-72 flowing in the minichannel was the thin alloy foil designated as Haynes-230. There was a microstructure on the side of the foil which comes into contact with fluid in the channel. Two types of microstructured heating surfaces: one with micro-recesses distributed evenly and another with mini-recesses distributed unevenly were used. The paper compares the impact of the microstructured heating surface and minichannel positions on the development of boiling and two phase flow pressure drop. The local heat transfer coefficients and flow resistance obtained in experiment using three positions of the minichannel, e.g.: 0°, 90° and 180° were analyzed. The study of the selected thermal and flow parameters (mass flux density and inlet pressure, geometric parameters and type of cooling liquid on the boiling heat transfer was also conducted. The most important factor turned out to be channel orientation. Application of the enhanced heating surface caused the increase of the heat transfer coefficient from several to several tens per cent, in relation to the plain surface.

  11. Comparison of two surface temperature measurement using thermocouples and infrared camera

    Directory of Open Access Journals (Sweden)

    Michalski Dariusz

    2017-01-01

    Full Text Available This paper compares two methods applied to measure surface temperatures at an experimental setup designed to analyse flow boiling heat transfer. The temperature measurements were performed in two parallel rectangular minichannels, both 1.7 mm deep, 16 mm wide and 180 mm long. The heating element for the fluid flowing in each minichannel was a thin foil made of Haynes-230. The two measurement methods employed to determine the surface temperature of the foil were: the contact method, which involved mounting thermocouples at several points in one minichannel, and the contactless method to study the other minichannel, where the results were provided with an infrared camera. Calculations were necessary to compare the temperature results. Two sets of measurement data obtained for different values of the heat flux were analysed using the basic statistical methods, the method error and the method accuracy. The experimental error and the method accuracy were taken into account. The comparative analysis showed that although the values and distributions of the surface temperatures obtained with the two methods were similar but both methods had certain limitations.

  12. Determination of the temperature distribution in a minichannel using ANSYS CFX and a procedure based on the Trefftz functions

    Directory of Open Access Journals (Sweden)

    Maciejewska Beata

    2017-01-01

    Full Text Available This work discusses the mathematical model for laminar-flow heat transfer in a minichannel. The boundary conditions in the form of temperature distributions on the outer sides of the channel walls were determined from experimental data. The data were collected from the experimental stand the essential part of which is a vertical minichannel 1.7 mm deep, 16 mm wide and 180 mm long, asymmetrically heated by a Haynes-230 alloy plate. Infrared thermography allowed determining temperature changes on the outer side of the minichannel walls. The problem was analysed numerically through either ANSYS CFX software or special calculation procedures based on the Finite Element Method and Trefftz functions in the thermal boundary layer. The Trefftz functions were used to construct the basis functions. Solutions to the governing differential equations were approximated with a linear combination of Trefftz-type basis functions. Unknown coefficients of the linear combination were calculated by minimising the functional. The results of the comparative analysis were represented in a graphical form and discussed.

  13. A Finite Element Theory for Predicting the Attenuation of Extended-Reacting Liners

    Science.gov (United States)

    Watson, W. R.; Jones, M. G.

    2009-01-01

    A non-modal finite element theory for predicting the attenuation of an extended-reacting liner containing a porous facesheet and located in a no-flow duct is presented. The mathematical approach is to solve separate wave equations in the liner and duct airway and to couple these two solutions by invoking kinematic constraints at the facesheet that are consistent with a continuum theory of fluid motion. Given the liner intrinsic properties, a weak Galerkin finite element formulation with cubic polynomial basis functions is used as the basis for generating a discrete system of acoustic equations that are solved to obtain the coupled acoustic field. A state-of-the-art, asymmetric, parallel, sparse equation solver is implemented that allows tens of thousands of grid points to be analyzed. A grid refinement study is presented to show that the predicted attenuation converges. Excellent comparison of the numerically predicted attenuation to that of a mode theory (using a Haynes 25 metal foam liner) is used to validate the computational approach. Simulations are also presented for fifteen porous plate, extended-reacting liners. The construction of some of the porous plate liners suggest that they should behave as resonant liners while the construction of others suggest that they should behave as broadband attenuators. In each case the finite element theory is observed to predict the proper attenuation trend.

  14. A critique of Katz's 'High LET constraint on low LET survival'

    International Nuclear Information System (INIS)

    Burch, P.R.J.; Chesters, M.S.

    1979-01-01

    Katz's interpretation of the connexion between RBE and LET is contrasted with a version published previously by Burch. The implications of Katz's model for dose-response relations apply only at ultra-high absorbed doses in Burch's model. In the latter, the shoulder on type-C survival curves for mammalian cells is explained in terms of Haynes' repair model. Under certain conditions the repair model becomes mathematically equivalent to the α-β model; under some other conditions it becomes equivalent to the 'two-component' model. The formulation of a new repair hypothesis, based on the idea of an inducible repair mechanism, is also set out. It is argued that Katz's supralinearity index' is appropriate to the induction of (rare) mutations but inappropriate to cell survival, for which an alternative index is proposed. Certain plausible hypotheses of radiobiological action conflict with Katz's 'logical constraint' which, it is contended, is neither logical nor valid. In conclusion, although experimental findings for some radiobiological systems conform to Katz's 'constraint', the frequently observed violations should not necessarily be regarded as artefacts. (author)

  15. Tourette's syndrome and associated disorders: a systematic review

    Directory of Open Access Journals (Sweden)

    Bárbara R. Ferreira

    2014-09-01

    Full Text Available Objective: To compile data on Tourette's syndrome (TS, tics and associated disorders.Methods: A systematic review of the literature was conducted using the 5S levels of organization of healthcare research evidence (systems, summaries, synopses, syntheses, studies, based on the model described by Haynes. The search keywords were Tourette, tics and comorbidity, which were cross-referenced. Studies provided by publishers and articles being processed on July 31, 2013, were also included.Results: Of all studies retrieved during the search, 64 were selected because they analyzed the epidemiology, clinical features and etiopathogenesis of TS and its comorbidities. TS is classified as a hyperkinetic movement disorder, and at least 90% of the patients have neuropsychiatric comorbidities, of which attention deficit hyperactivity and obsessive-compulsive disorders are the most common. The syndrome is clinically heterogeneous and has been associated with a dysfunction of cortico-striatal-thalamic-cortical circuits involving various neurotransmitters. Although its genetic etiology has been widely studied, other factors may be important to understand this syndrome and its associated disorders.Conclusions: TS is a neurodevelopmental disorder that results from the impact of stress factors on a vulnerable biological substrate during the critical periods of neurodevelopment. The study of TS and its comorbidities may contribute, at different levels, to the understanding of several neuropsychiatric disorders of clinical and therapeutic relevance.

  16. Magnetic field and dielectric environment effects on an exciton trapped by an ionized donor in a spherical quantum dot

    Science.gov (United States)

    Aghoutane, N.; Feddi, E.; El-Yadri, M.; Bosch Bailach, J.; Dujardin, F.; Duque, C. A.

    2017-11-01

    Magnetic field and host dielectric environment effects on the binding energy of an exciton trapped by an ionized donor in spherical quantum dot are investigated. In the framework of the effective mass approximation and by using a variational method, the calculations have been performed by developing a robust ten-terms wave function taking into account the different inter-particles correlations and the distortion of symmetry induced by the orientation of the applied magnetic field. The binding and the localization energies are determined as functions of dot size and magnetic field strength. It appears that the variation of magnetic shift obeys a quadratic law for low magnetic fields regime while, for strong magnetic fields, this shift tends to be linear versus the magnetic field strength. The stability of this complex subjected to a magnetic field is also discussed according to the electron-hole ratio and the dielectric constant of the surrounding medium. A last point to highlight is that the Haynes' rule remains valid even in the presence of an applied magnetic field.

  17. Supercritical boiler material selection using fuzzy analytic network process

    Directory of Open Access Journals (Sweden)

    Saikat Ranjan Maity

    2012-08-01

    Full Text Available The recent development of world is being adversely affected by the scarcity of power and energy. To survive in the next generation, it is thus necessary to explore the non-conventional energy sources and efficiently consume the available sources. For efficient exploitation of the existing energy sources, a great scope lies in the use of Rankin cycle-based thermal power plants. Today, the gross efficiency of Rankin cycle-based thermal power plants is less than 28% which has been increased up to 40% with reheating and regenerative cycles. But, it can be further improved up to 47% by using supercritical power plant technology. Supercritical power plants use supercritical boilers which are able to withstand a very high temperature (650-720˚C and pressure (22.1 MPa while producing superheated steam. The thermal efficiency of a supercritical boiler greatly depends on the material of its different components. The supercritical boiler material should possess high creep rupture strength, high thermal conductivity, low thermal expansion, high specific heat and very high temperature withstandability. This paper considers a list of seven supercritical boiler materials whose performance is evaluated based on seven pivotal criteria. Given the intricacy and difficulty of this supercritical boiler material selection problem having interactions and interdependencies between different criteria, this paper applies fuzzy analytic network process to select the most appropriate material for a supercritical boiler. Rene 41 is the best supercritical boiler material, whereas, Haynes 230 is the worst preferred choice.

  18. Mechanisms of oxide layer formation and destruction on a chromia former nickel base alloy in HTR environment

    International Nuclear Information System (INIS)

    Rouillard, F.

    2007-10-01

    Haynes 230 alloy which contains 22 wt.% chromium could be a promising candidate material for structures and heat exchangers (maximum operating temperature: 850-950 C) in Very High Temperature Reactors (VHTR). The feasibility demonstration involves to valid its corrosion resistance in the reactor specific environment namely impure helium. The alloys surface reactivity was investigated at temperatures between 850 and 1000 C. We especially focused on the influence of different parameters such as concentrations of impurities in the gas phase (carbon monoxide and methane, water vapour/hydrogen ratio), alloy composition (activities of Cr and C, alloying element contents) and temperature. Two main behaviours have been revealed: the formation of a Cr/Mn rich oxide layer at 900 C and its following reduction at higher temperatures. At 900 C, the water vapour is the main oxidizing gas. However in the initial times, the carbon monoxide reacts at the metal/oxide interface which involves a gaseous transport through the scale; CO mainly oxidizes the minor alloying elements aluminium and silicon. Above a critical temperature TA, the carbon in solution in the alloy reduces chromia. To ascribe the scale destruction, a model is proposed based on thermodynamic interfacial data for the alloy, oxide layer morphology and carbon monoxide partial pressure in helium; the model is then validated regarding experimental results and observations. (author)

  19. Re-analysis of a banding study to test the effects of an experimental increase in bag limits of mourning doves

    Science.gov (United States)

    Otis, D.L.; White, Gary C.

    2002-01-01

    In 1966-1971, eastern US states with hunting seasons on mourning doves (Zenaida macroura) participated in a study designed to estimate the effects of bag limit increases on population survival rates. More than 400 000 adult and juvenile birds were banded and released during this period, and subsequent harvest and return of bands, together with total harvest estimates from mail and telephone surveys of hunters, provided the database for analysis. The original analysis used an ANOVA framework, and resulted in inferences of no effect of bag limit increase on population parameters (Hayne 1975). We used a logistic regression analysis to infer that the bag limit increase did not cause a biologically significant increase in harvest rate and thus the experiment could not provide any insight into the relationship between harvest and annual survival rates. Harvest rate estimates of breeding populations from geographical subregions were used as covariates in a Program MARK analysis and revealed an association between annual survival and harvest rates, although this relationship is potentially confounded by a latitudinal gradient in survival rates of dove populations. We discuss methodological problems encountered in the analysis of these data, and provide recommendations for future studies of the relationship between harvest and annual survival rates of mourning dove populations.

  20. The Mediating Role of Job Stress on The Effect of Mobbing on Burnout: An Analysis of Social Security Organization Employees in The District of Ankara

    Directory of Open Access Journals (Sweden)

    Yücel Erol

    2015-06-01

    Full Text Available In this study, due to the influence of Mobbing (MO on Burnout (BU, the mediating role of Job Stress (JS on employees is examined. Hence, 826 employees of public and private institutions in Ankara were included in the sample. The data obtained by a questionnaire that prepared by Leymann (1996’s MO scale, and Maslach (1981's BU scale and Haynes (1996's JS scale. Data was evaluated by using One-Way ANOVA, correlation, regression, and multiple regression SPSS. As can be seen from the results of research, applied and perceived MO has a significant impact on employees' JS’s levels and becomes effective in the creation of JS. On the other hand, BU syndrome were seen as a consequence of the resulting JS. These conditions affect each other and existence of one within the organizational structure, results emergence of the other two. Therefore, management of organization, all levels of managers, and employees as individuals should be aware of these psychological states and conduct studies aimed for its prevention.In this research, meaningful relationships have been identified in the mediating role of JS at the impact of MO on BU. On the other hand in terms of demographic variables, significant variations were found in the levels of MO, BU, and JS

  1. Congenital pyeloureteral junction stenosis -postoperative follow-up with MDCT urography

    International Nuclear Information System (INIS)

    Al-Amin, M.

    2012-01-01

    Full text: 30-year-old male patient with asymptomatic congenital hydronephrosis of the left kidney detected on routine ultrasound investigation in relation to haematemesis 7 years ago. It is established a pyeloureteral junction stenosis and has made a resection of the stenotic part of the segment with a further plastic by Anderson - Haynes - Kuester. The histological analysis of resected area found expressed muscle layer and chronic inflammatory infiltrates as same as the in miofibroepithel disembriogenesis. After that, there was a recidive of the hydronephrosis and a further replastic and endopyeloplastic surgery performed in Germany in 2008. Two years after that with multislice computed tomography and computed tomography urography showing recurrence of the disease. Hydronephrosis is nonobstructive, asymptomatic, with no gallstones visualized along the left ureter. There is a delayed drainage function of the left kidney, which does not separate contrast medium in the 60th minute of computed tomography urography. The diagnosis of the condition is a nonobstructive hydronephrosis recidive of the left kidney. There are no aberrant renal arteries or renal arteries stenosis on postprocessing imaging

  2. Characterization for fusion first-wall damage studies of using tailored D-T neutron fields

    International Nuclear Information System (INIS)

    Dierckx, R.; Emigh, C.R.

    1979-01-01

    The approximation required to apply the Bullough-Haynes results to the present calculations is somewhat crude and may imply that the details of the results contain considerable error. However, when the results for each neutron source are viewed in a relative context, several valid and important observations can be made. The almost identical swelling results obtained for the intense neutron source (INS) with a standard blanket and the fusion first wall are most striking. A further comparison with a fusion reactor shows that even the spatial and energy distributions of the neutron flux are similar. In both the INS with blanket and at the first wall of a fusion reactor, there is a radial source flux component of 14-MeV neutrons and a more or less isotropic flux component of low energy (< 14-MeV) neutrons. One must therefore conclude that from the point-of-view of neutron radiation damage, the INS with a blanket, unlike all other types of neutron sources, is not a simulation environment. It is, in fact, a small scale fusion device, and data obtained from INS irradiation experiments would represent fusion reactor results. Such data could then be used to develop correlative procedures for applying data obtained from other simulation sources to fusion reactor conditions

  3. Anticipatory eye movements and long-term memory in early infancy.

    Science.gov (United States)

    Wong-Kee-You, Audrey M B; Adler, Scott A

    2016-11-01

    Advances in our understanding of long-term memory in early infancy have been made possible by studies that have used the Rovee-Collier's mobile conjugate reinforcement paradigm and its variants. One function that has been attributed to long-term memory is the formation of expectations (Rovee-Collier & Hayne, 1987); consequently, a long-term memory representation should be established during expectation formation. To examine this prediction and potentially open the door on a new paradigm for exploring infants' long-term memory, using the Visual Expectation Paradigm (Haith, Hazan, & Goodman, 1988), 3-month-old infants were trained to form an expectation for predictable color and spatial information of picture events and emit anticipatory eye movements to those events. One day later, infants' anticipatory eye movements decreased in number relative to the end of training when the predictable colors were changed but not when the spatial location of the predictable color events was changed. These findings confirm that information encoded during expectation formation are stored in long-term memory, as hypothesized by Rovee-Collier and colleagues. Further, this research suggests that eye movements are potentially viable measures of long-term memory in infancy, providing confirmatory evidence for early mnemonic processes. © 2016 Wiley Periodicals, Inc.

  4. Mechanical Property and Its Comparison of Superalloys for High Temperature Gas Cooled Reactor

    International Nuclear Information System (INIS)

    Kim, Woo Gon; Kim, D. W.; Ryu, W. S.; Han, C. H.; Yoon, J. H.; Chang, J.

    2005-01-01

    Since structural materials for high temperature gas cooled reactor are used during long period in nuclear environment up to 1000 .deg. C, it is important to have good properties at elevated temperature such as mechanical properties (tensile, creep, fatigue, creep-fatigue), microstructural stability, interaction between metal and gas, friction and wear, hydrogen and tritium permeation, irradiation behavior, corrosion by impurity in He. Thus, in order to select excellent materials for the high temperature gas cooled reactor, it is necessary to understand the material properties and to gather the data for them. In this report, the items related to material properties which are needed for designing the high temperature gas cooled reactor were presented. Mechanical properties; tensile, creep, and fatigue etc. were investigated for Haynes 230, Hastelloy-X, In 617 and Alloy 800H, which can be used as the major structural components, such as intermediate heat exchanger (IHX), hot duct and piping and internals. Effect of He and irradiation on these structural materials was investigated. Also, mechanical properties; physical properties, tensile properties, creep and creep crack growth rate were compared for them, respectively. These results of this report can be used as important data to select superior materials for high temperature gas reactor

  5. Max Phase Materials And Coatings For High Temperature Heat Transfer Applications

    Energy Technology Data Exchange (ETDEWEB)

    Martinez-Rodriguez, M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Garcia-Diaz, B. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Olson, L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Fuentes, R. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Sindelar, R. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-10-19

    Molten salts have been used as heat transfer fluids in a variety of applications within proposed Gen IV nuclear designs and in advanced power system such as Concentrating Solar Power (CSP). However, operating at elevated temperatures can cause corrosion in many materials. This work developed coating technologies for MAX phase materials on Haynes-230 and characterized the corrosion of the coatings in the presence of commercial MgCl2-KCl molten salt. Cold spraying of Ti2AlC and physical vapor deposition (PVD) of Ti2AlC or Zr2AlC were tested to determine the most effective form of coating MAX phases on structural substrates. Corrosion testing at 850°C for 100 hrs showed that 3.9 μm Ti2AlC by PVD was slightly protective while 117 μm Ti2AlC by cold spray and 3.6 μm Zr2AlC by PVD were completely protective. None of the tests showed decomposition of the coating (Ti or Zr) into the salt

  6. The role of verbal labels on flexible memory retrieval at 12-months of age.

    Science.gov (United States)

    Taylor, Gemma; Liu, Hao; Herbert, Jane S

    2016-11-01

    The provision of verbal labels enhances 12-month-old infants' memory flexibility across a form change in a puppet imitation task (Herbert, 2011), although the mechanisms for this effect remain unclear. Here we investigate whether verbal labels can scaffold flexible memory retrieval when task difficulty increases and consider the mechanism responsible for the effect of language cues on early memory flexibility. Twelve-month-old infants were provided with English, Chinese, or empty language cues during a difficult imitation task, a combined change in the puppet's colour and form at the test (Hayne et al., 1997). Imitation performance by infants in the English language condition only exceeded baseline performance after the 10-min delay. Thus, verbal labels facilitated flexible memory retrieval on this task. There were no correlations between infants' language comprehension and imitation performance. Thus, it is likely that verbal labels facilitate both attention and categorisation during encoding and retrieval. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

  7. Long-term Transfer of Learning from Books and Videos during Toddlerhood

    Science.gov (United States)

    Brito, Natalie; Barr, Rachel; McIntyre, Paula; Simcock, Gabrielle

    2011-01-01

    Television viewing and picture book reading are prevalent activities during toddlerhood and research has shown that toddlers can imitate from both books and videos after short delays (Barr & Hayne, 1999; Simcock & DeLoache, 2006). This is the first study to directly compare toddlers’ long-term retention rates for target actions learned from a video or book. Toddlers (N = 158) aged 18- and 24-months saw an experimenter demonstrating how to make a novel 3-step toy rattle via a pre-recorded video or a picture book. The toddlers’ imitation of the target actions was tested after a specific delay (e.g., 2 weeks, 4 weeks) and their performance was compared to that of age-matched controls who did not see a demonstration. The 18-month-olds retained the target actions for 2 weeks, exhibiting forgetting at 4 weeks, whereas the 24-month-olds retained the information for up to 4 weeks, exhibiting forgetting at 8 weeks. Retention rates for books and videos did not differ at either age. These findings demonstrate very impressive retention from a brief 2D media demonstration and they contribute to our overall understanding of long-term memory processes during infancy. PMID:21911223

  8. Mechanical properties of Ni-base superalloys in high temperature steam environments

    International Nuclear Information System (INIS)

    Jang, Changheui; Kim, Donghoon; Sah, Injin; Lee, Ho Jung

    2015-01-01

    The effects of environmental damages on the mechanical properties of Ni-base superalloys, Alloy 617 and Haynes 230, were evaluated for VHTR-HTSE applications. Tensile tests were carried out at room temperature after ageing at 900 deg. C in vacuum, steam, and steam + 20 vol.% H2 environments up to 3 000 h. Also, creep rupture test were performed in air, steam, and steam + 20 vol.% H2 environments. The degradations such as oxidation, decarburization, and redistribution of carbides were studied in view of the interaction of materials with the environment. During the long-term ageing at 900 deg. C in vacuum, secondary phases such as M23C6 and M6C were precipitated and coarsened, which caused increase in tensile strength and decrease in ductility. For the specimens aged in steam environments, surface and internal oxides acted as preferential sites for crack initiation and consequently, decreased the tensile and creep strength. Also, the formation of decarburization region resulted in glide plane failure during tensile test and reduction in creep rupture life due to grain boundary migration and recrystallisation. During creep tests, tensile stress caused the crack and void formation in oxide layer. Consequently, fast diffusion of oxidant occurred and environmental damage were accelerated. Among the test conditions, such environmental damage was much severe in steam environments. (authors)

  9. Irradiation effects on low-friction coatings for LMFBR applications

    International Nuclear Information System (INIS)

    Ward, A.L.; Johnson, R.N.; Guthrie, G.L.; Aungst, R.C.

    1975-11-01

    A variety of wear-resistant low-friction materials has been irradiated in the EBR-II in order to assess their reponse to LMFBR environments. Pre- and postirradiation testing and examination efforts have concentrated on candidate materials for application to the wear pads on FTR ducts (fuel, control, and reflector assemblies), and a significant result has been qualification of a proprietary detonation-gun-applied chromium carbide coating which employs a Ni Cr binder. Additional materials such as Inconel-718, Haynes-273, aluminides, and various chromium carbide/binder combinations, and other application processes such as plasma-spray, weld-overlays, diffusion bonding and explosive bonding, have also been studied. The most detailed examinations were conducted on selected chromium carbide coatings and included visual inspection, weight and dimensional measurements, metallography, electron microprobe, epoxy-lift-off, and x-ray diffraction analysis. Chromium carbide coatings applied by the detonation-gun process have demonstrated a marked superiority to those applied by plasma-spray techniques

  10. Cannabis use and dating violence among college students: A call for research.

    Science.gov (United States)

    Shorey, Ryan C; Haynes, Ellen; Strauss, Catherine; Temple, Jeff R; Stuart, Gregory L

    2017-01-01

    Dating violence is a serious and prevalent problem on college campuses. Although there is a robust literature documenting that alcohol use is consistently associated with increased risk for perpetrating dating violence, little research has examined the role of cannabis in dating violence perpetration. With increasing legalisation of cannabis throughout the world, it is imperative to understand what role, if any, cannabis may play in the important public health problem of dating violence. In this commentary, we discuss the current state of the research on cannabis and dating violence and suggest avenues for additional research in this area. It is critical that we conduct methodologically sound research on the association between cannabis and dating violence so that we can understand what role, if any, cannabis exerts on this important problem. [Shorey RC, Haynes E, Strauss C, Temple JR, Stuart GL. Cannabis use and dating violence among college students: A call for research. Drug Alcohol Rev 2017;36:17-19]. © 2017 Australasian Professional Society on Alcohol and other Drugs.

  11. Chronic nailbiting: a controlled comparison of competing response and mild aversion treatments.

    Science.gov (United States)

    Allen, K W

    1996-03-01

    Recent studies have suggested that competing response, an abridged version of Azrin and Nunn's (1973) habit reversal method (Behaviour Research and Therapy, 11, 619-628), is a key component in the treatment of chronic nailbiting (Horne & Wilkinson, 1980, Behaviour Research and Therapy, 18, 287-291; Silber & Haynes, 1992, Behaviour Research and Therapy, 30, 15-22). This study replicated and extended the latter by adding an 8 week follow-up period and by using a non-student sample. Forty-five chronic nailbiter Ss were divided into three experimental groups. One method involved the use of mild aversion in which Ss painted a bitter substance on their nails. A second method required the subject to perform a competing response whenever they had the urge to nailbite or found themselves biting their nails. Both methods included self-monitoring of the behaviour and a third group of Ss performed self-monitoring alone as a control condition. The study lasted 12 weeks. Mild aversion resulted in significant improvements in nail length, with the competing response method just failing to show significance in this regard. There was no significant improvement for the control group. The implications for further study and the benefits of competing response in the light of these findings are discussed in terms of treatment success and use of therapist time.

  12. High-resolution photoluminescence spectroscopy of Sn-doped ZnO single crystals

    International Nuclear Information System (INIS)

    Kumar, E. Senthil; Mohammadbeigi, F.; Boatner, L.A.; Watkins, S.P.

    2016-01-01

    Group IV donors in ZnO are poorly understood, despite evidence that they are effective n-type dopants. Here we present high-resolution photoluminescence (PL) spectroscopy studies of unintentionally doped and Sn-doped ZnO single crystals grown by the chemical vapor transport method. Doped samples showed greatly increased emission from the I 10 bound exciton transition that was recently proven to be related to the incorporation of Sn impurities based on radio-isotope studies. The PL linewidths are exceptionally sharp for these samples, enabling a clear identification of several donor species. Temperature-dependent PL measurements of the I 10 line emission energy and intensity dependence reveal a behavior that is similar to other shallow donors in ZnO. Ionized donor bound-exciton and two-electron satellite transitions of the I 10 transition are unambiguously identified and yield a donor binding energy of 71 meV. In contrast to recent reports of Ge-related donors in ZnO, the spectroscopic binding energy for the Sn-related donor bound exciton follows a linear relationship with donor binding energy (Haynes rule) similar to recently observed carbon related donors, and confirming the shallow nature of this defect center, which was recently attributed to a Sn Zn double donor compensated by an unknown single acceptor.

  13. The paired-domination and the upper paired-domination numbers of graphs

    Directory of Open Access Journals (Sweden)

    Włodzimierz Ulatowski

    2015-01-01

    Full Text Available In this paper we continue the study of paired-domination in graphs. A paired-dominating set, abbreviated PDS, of a graph \\(G\\ with no isolated vertex is a dominating set of vertices whose induced subgraph has a perfect matching. The paired-domination number of \\(G\\, denoted by \\(\\gamma_{p}(G\\, is the minimum cardinality of a PDS of \\(G\\. The upper paired-domination number of \\(G\\, denoted by \\(\\Gamma_{p}(G\\, is the maximum cardinality of a minimal PDS of \\(G\\. Let \\(G\\ be a connected graph of order \\(n\\geq 3\\. Haynes and Slater in [Paired-domination in graphs, Networks 32 (1998, 199-206], showed that \\(\\gamma_{p}(G\\leq n-1\\ and they determine the extremal graphs \\(G\\ achieving this bound. In this paper we obtain analogous results for \\(\\Gamma_{p}(G\\. Dorbec, Henning and McCoy in [Upper total domination versus upper paired-domination, Questiones Mathematicae 30 (2007, 1-12] determine \\(\\Gamma_{p}(P_n\\, instead in this paper we determine \\(\\Gamma_{p}(C_n\\. Moreover, we describe some families of graphs \\(G\\ for which the equality \\(\\gamma_{p}(G=\\Gamma_{p}(G\\ holds.

  14. Reliability and validity of clinical tests to assess the anatomical integrity of the cervical spine in adults with neck pain and its associated disorders: Part 1-A systematic review from the Cervical Assessment and Diagnosis Research Evaluation (CADRE) Collaboration.

    Science.gov (United States)

    Lemeunier, Nadège; da Silva-Oolup, S; Chow, N; Southerst, D; Carroll, L; Wong, J J; Shearer, H; Mastragostino, P; Cox, J; Côté, E; Murnaghan, K; Sutton, D; Côté, P

    2017-09-01

    To determine the reliability and validity of clinical tests to assess the anatomical integrity of the cervical spine in adults with neck pain and its associated disorders. We updated the systematic review of the 2000-2010 Bone and Joint Decade Task Force on Neck Pain and its Associated Disorders. We also searched the literature to identify studies on the reliability and validity of Doppler velocimetry for the evaluation of cervical arteries. Two independent reviewers screened and critically appraised studies. We conducted a best evidence synthesis of low risk of bias studies and ranked the phases of investigations using the classification proposed by Sackett and Haynes. We screened 9022 articles and critically appraised 8 studies; all 8 studies had low risk of bias (three reliability and five validity Phase II-III studies). Preliminary evidence suggests that the extension-rotation test may be reliable and has adequate validity to rule out pain arising from facet joints. The evidence suggests variable reliability and preliminary validity for the evaluation of cervical radiculopathy including neurological examination (manual motor testing, dermatomal sensory testing, deep tendon reflexes, and pathological reflex testing), Spurling's and the upper limb neurodynamic tests. No evidence was found for doppler velocimetry. Little evidence exists to support the use of clinical tests to evaluate the anatomical integrity of the cervical spine in adults with neck pain and its associated disorders. We found preliminary evidence to support the use of the extension-rotation test, neurological examination, Spurling's and the upper limb neurodynamic tests.

  15. Plantas medicinais referenciadas por raizeiros no município de Jataí, estado de Goiás

    Directory of Open Access Journals (Sweden)

    L.F. SOUZA

    Full Text Available RESUMO Este trabalho objetivou pesquisar as plantas medicinais referenciadas por raizeiros do município de Jataí-GO, evidenciando o Valor de Uso Reportado (VUR e a conexão com os níveis filogenéticos atuais. Com cerca de 200 anos de história, Jataí localiza-se no Planalto Central do Brasil, Sudoeste de Goiás (17°52’53’’S e 51°42’52’’W, tendo atualmente, como principal fonte de renda o agronegócio. Para a seleção dos raizeiros e coleta dos dados aplicou-se o método bola de neve e a técnica de entrevistas semiestruturadas. Determinou-se a etnoespécie, parte usada, uso, modo de preparo, sintomas / doenças relacionando aos sistemas corporais. Foram reportadas 515 referências etnobotânicas para 112 etnoespécies principalmente dos clados Fabídeas, Lamídeas, e Campanulídeas. Sobressaíram as etnoespécies Pé-de-perdiz (Croton antisyphilliticus, Sangra-dágua (C. urucurana, Pau-terra-de-folha-larga (Qualea grandiflora, Erva-de-Santa Maria (Chenopodium album, Amaro-leite (Operculina alata, Algodãozinho-do-campo (Cochlospermum regium, Cavalinha (Equisetum hiemale e Jaborandi (Piper aduncum, com VUR maior que 10. Os sistemas corporais mais importantes com relação ao número de etnoespécies relatadas foram respiratório, digestivo, circulatório e tegumentar. As etnoespécies mais versáteis em uso nos sistemas corporais foram Copaíba (Copaifera langsdorffii, Pé-de-perdiz (Croton antisyphiliticus, Cavalinha (Equisetum hiemale, Alecrim (Rosmarinus officinalis e Fruta-de-lobo (Solanum paniculatum. A prática da medicina tradicional em Jataí evidencia a conexão entre a escolha de plantas e os níveis filogenéticos derivados. Algumas destas etnoespécies estão na listagem de plantas medicinais que o Ministério da Saúde do Brasil escolheu para a realização de monografias, fato que fortalece o valor do conhecimento do uso da flora nas práticas da medicina tradicional.

  16. COMPOSICIÓN FLORÍSTICA Y ESTRUCTURA DE LOS BOSQUES RIBEREÑOS DE LA CUENCA BAJA DEL RÍO PAUTO, CASANARE, COLOMBIA

    Directory of Open Access Journals (Sweden)

    Diego Mauricio Cabrera-Amaya

    2016-01-01

    Full Text Available Se caracterizó la composición florística y aspectos de la estructura de la vegetación en bosques ribereños de la cuenca baja del río Pauto (Colombia, Casanare utilizando la información de nueve parcelas de 20 x 50 m (1000 m², se midieron el diámetro a la altura del pecho (DAP, la altura total y cobertura de la copa. Se analizó la riqueza y los valores de importancia por especie y por familia. Se realizó un análisis para establecer una clasificación local de los tipos de bosque, los cuales se describieron en términos de clases diamétricas y altimétricas, diagramas estructurales e índice de predominio fisionómico. Se registraron 185 especies, 127 géneros y 56 familias, la mayor riqueza florística se agrupó en las familias Rubiaceae, Moraceae, Myrtaceae, Fabaceae y Bignoniaceae y en los géneros Ficus, Piper, Psychotria e Inga. Las familias con mayor IVF fueron Arecaceae, Fabaceae, Euphorbiaceae, Moraceae y Verbenaceae. Las especies más importantes según su IVI fueron: Attalea butyracea, Clarisia biflora, Sarcaulus brasiliensis, Dendropanax arboreus e Inga interrupta. Se encontraron seis comunidades, de las cuales sólo la primera se ha mencionado con anterioridad: 1 Palmar de Mauritia flexuosa y Euterpe precatoria, 2 Bosque de galería de Copaifera pubiflora y Homalium racemosum, 3 Bosque de vega de Discocarpus spruceanus y Sloanea terniflora, 4 Bosque de vega de Attalea butyracea y Garcinia madruno, 5 Bosque de galería de Attalea butyracea e Inga interrupta, y 6 Bosque de vega Attalea butyracea y Clarisia biflora. Los bosques presentan múltiples estratos con alturas del dosel desde los 18 m sobre las riberas de los caños, hasta 25 m en las vegas de los ríos. La riqueza y la composición concuerdan con los patrones florísticos de la Orinoquía colombiana, especialmente a nivel de familia, pero son menos las coincidencias a nivel de género y especie. La concentración de individuos en clases diamétricas pequeñas es

  17. Análise físico-química do óleo-resina e variabilidade genética de copaíba na Floresta Nacional do Tapajós

    Directory of Open Access Journals (Sweden)

    Ederly Santos Silva

    2012-11-01

    Full Text Available O objetivo deste trabalho foi caracterizar o óleo-resina da copaíba (Copaifera reticulata e estimar, por meio de marcadores microssatélites, a variabilidade genética da espécie na Floresta Nacional do Tapajós, PA. A amostragem foi realizada em duas áreas, distanciadas de 5 km, em 136 árvores. A diversidade genética foi avaliada com seis marcadores microssatélites derivados de C. langsdorffii, e o óleo obtido de 30 árvores (15 de cada área foi caracterizado em termos físicos e químicos. O óleo C. reticulata apresenta aspecto líquido, fino, odor fraco e de coloração amarelo-dourada (73,3% das plantas, com viscosidade muito variável (18 a 187 Pa-s e densidade média de 0,975±0,049 g cm-3. O índice de acidez variou de 9,62 a 10,17 mg g-1 de KOH e o de saponificação de 100,63 a 109,84 mg g-1. A análise molecular identificou 78 alelos, com média de 13 por loco. A heterozigosidade esperada variou 0,59 a 0,85 (média de 0,75, com nível de endogamia de 0,375 a 0,419. Houve pouca diferenciação genética entre as populações das diferentes áreas de coleta (F ST = 0,030, mas a variabilidade foi maior entre os grupos genéticos detectados pelo programa Structure (F ST = 0,070. Essa maior variabilidade indica que não há ameaças à conservação genética da copaíba, em médio prazo.

  18. Florística e estrutura da comunidade arbórea de um fragmento florestal em Luminárias, MG Floristic composition and structure of the tree layer of a forest fragment in Luminárias Municipality, Minas Gerais State

    Directory of Open Access Journals (Sweden)

    Luciene Alves Rodrigues

    2003-03-01

    Full Text Available O objetivo deste trabalho foi analisar a composição florística e estrutural da comunidade arbórea de uma floresta em Luminárias, MG. O local de estudo é conhecido como Mata do Galego, possui cerca de 77 ha e está localizado a 21°29'S e 44°55'W, às margens do rio Ingaí. A amostragem florística foi realizada em parcelas e também em caminhadas pela floresta. Todo o material coletado foi identificado e incorporado ao Herbário ESAL, da Universidade Federal de Lavras. O levantamento estrutural foi realizado por meio de amostragem sistemática, em 32 parcelas de 20 × 20m, distribuídas em três transeções, da margem do rio até a borda da mata. Nas parcelas, foram amostrados todos os indivíduos arbóreos, vivos, com circunferência à altura do peito (CAP ≥ 15,5 cm. As variáveis químicas e físicas do solo foram obtidas das análises de amostras superficiais de solo (0-20 cm de cada parcela. No levantamento florístico foram amostradas 201 espécies, 129 gêneros e 57 famílias. As famílias com maior riqueza foram Myrtaceae, Lauraceae, Fabaceae Faboideae, Rubiaceae, Euphorbiaceae e Fabaceae Mimosoideae. No levantamento estrutural foram amostrados 2343 indivíduos de 159 espécies, 104 gêneros e 50 famílias. As espécies mais abundantes foram Casearia sylvestris, Lithraea molleoides, Machaerium stipitatum, Faramea cyanea, Diospyros inconstans e Copaifera langsdorffii. A Mata do Galego apresentou alta diversidade de espécies (H' = 4,23 nat/indivíduo e alta equabilidade (J' = 0,83. A alta diversidade de espécies pode estar relacionada à influência de formações vegetais próximas e aos diferentes microhabitats proporcionados pela topografia, variações na fertilidade e umidade do solo.The aim of this study was to analyze the floristic composition and structure of the tree layer of a forest fragment in the municipality of Luminárias, Minas Gerais State, southeastern Brazil. The forest fragment is locally known as Mata do

  19. A flora melitófila de uma área de dunas com vegetação de caatinga, Estado da Bahia, Nordeste do Brasil The bee flora of caatinga vegetation on sand dunes in Bahia State, Northeastern Brazil

    Directory of Open Access Journals (Sweden)

    Ana Tereza Araújo Rodarte

    2008-06-01

    Full Text Available As espécies melitófilas de uma área de caatinga foram caracterizadas quanto à morfologia e recursos florais, floração e abelhas visitantes. As coletas foram realizadas, durante quatro dias consecutivos, em fevereiro, abril, junho, agosto, outubro e dezembro/2000 (10º47'37'S e 42º49'25'W. A área foi percorrida das 06:00 às 17:00 h, seguindo dois transectos paralelos (com 450 m × 100 m e 550 m × 100 m e distando 50 m entre si, abrangendo 10 ha. As 42 espécies melitófilas identificadas (55% da flora local foram visitadas por 2.924 indivíduos de 41 espécies abelhas. As famílias Caesalpiniaceae e Malpighiaceae foram as mais visitadas. As espécies predominantemente visitadas por 35 espécies de abelhas, correspondendo a 78% do total de indivíduos foram: Byrsonima blanchetiana Miq., Copaifera coriacea Mart., Senna macranthera, Peltogyne pauciflora Benth., Senna gardneri (Benth. H.S. Irwin & Barneby, Serjania comata, Mouriri pusa (Gardner, Jatropha mutabilis (Pohl. Baill., Maytenus rigida Mart. e Turnera calyptrocarpa Urb. (24% da flora apícola. A produção de flores dessas espécies representou 95% do total. Em geral, os aspectos básicos da morfologia floral das espécies: pequenas, dispostas em inflorescências, zigomorfas, de cores alva e rosa, monoclinas e com deiscência longitudinal das anteras, não diferiram em relação à flora local, corroborando o seu caráter generalista. O predomínio de interações generalistas deve-se à abundância local de abelhas eussociais nativas (Meliponinae e Apis mellifera. Embora a produção de flores tenha sido maior na estação chuvosa, as abelhas foram mais abundantes no período seco, indicando que o recurso não limitou a atividade das abelhas. As plantas do estrato arbustivo e herbáceo floresceram mais intensamente no período seco e chuvoso, respectivamente, gerando um grau de compartimentalização no padrão de uso dos recursos pelas abelhas. Esse padrão pode favorecer a

  20. Qualidade da madeira de cinco espécies florestais para o envelhecimento da cachaça Quality of wood of five forestal species for aging of 'cachaça'

    Directory of Open Access Journals (Sweden)

    Catarina G. Catão

    2011-07-01

    Full Text Available Realizou-se esta pesquisa com o objetivo de avaliar as características das madeiras de amburana (Amburana cearencis (Fr. Allem. A.C. Sm., bálsamo (Myroxylon peruiferum L.f., ipê-amarelo (Tabebuia chrysotricha (Mart. ex DC. Standl., jatobá (Hymenaea courbaril L. var. stilbocarpa (Hayne Lee et Lang. e jequitibá-rosa (Cariniana legalis (Mart. Kuntze no armazenamento de cachaças; comparar as cachaças com amostra armazenada em barril de carvalho (Quercus sp., analisar o efeito do envelhecimento e comparar os valores obtidos com os padronizados pela Legislação Brasileira. Para tanto, as cachaças foram armazenadas em barris de madeira e em recipiente de vidro e analisadas suas características químicas (acidez volátil, álcool metílico, álcool superior, aldeído, cobre, éster, extrato seco a 100 ºC, furfural e grau alcoólico e organolépticas (cor, sabor e aroma. Após seis meses de armazenamento as cachaças foram comparadas com os valores padronizados. Independente da espécie, a madeira melhorou as qualidades sensoriais da cachaça incorporando, à bebida, cor, gosto e sabor característicos. Todas as cachaças avaliadas continuaram dentro dos padrões de qualidade estabelecidos pela Legislação Brasileira.This research aimed to evaluate the wood quality of Amburana cearencis (Fr. Allem. A.C. Sm., Myroxylon peruiferum L.f., Tabebuia chrysotricha (Mart. ex DC. Standl., Hymenaea courbaril L. var. stilbocarpa (Hayne Lee et Lang. and Cariniana legalis (Mart. Kuntze in the storage of "cachaça" (Brazilian sugar cane spirit; to compare the "cachaça" studied with the stored one in barrel of oak (Quercus sp., to analyze the effect of the aging and to compare the values obtained with the standard ones for the Brazilian Legislation. Thus, the "cachaças" were stored in wooden and glass barrels and their chemical (volatile acidity, methyl alcohol, superior alcohol, aldehyde, cupper, ester, dry extract to 100 ºC, furfural contents and

  1. Evaluation of adherence to treatment by patients seen in a psychosocial care center in northeastern Brazil

    Directory of Open Access Journals (Sweden)

    Thaís Teles Souza

    2011-12-01

    Full Text Available In the treatment of mental disorders, nonadherence to medication, the main cause of psychiatric morbidity, is observed in about 50% of the cases and is responsible for numerous losses. This study evaluated adherence to drug treatment by patients seen in a Psychosocial Care Center (CAPS in northeastern Brazil. Adherence to treatment was evaluated using the Haynes-Sackett and Morisky-Green-Levine tests. All patients registered in the CAPS were included in the study (n= 101. Only 11.88% of the patients adhered to drug treatment. The main reasons not to use medication were: oblivion (68.83%, feeling unwell after taking the medication (54.22%, not having money to buy the medication (43.83%, not finding the medication in the public health service (39.94% and fear of harm that might be caused by the drug (28.90%. Furthermore, 85.1% of the patients did not know their diseases, 88.1% did not know their treatment, 86.4% did not feel good when they took their medication, and 88.1% took their medication incorrectly. The results revealed that the lack of information about diseases and drugs used, the nuisance posed by drug therapy and the low access to medications reduce adherence to treatment and, consequently, treatment effectiveness.No tratamento de desordens mentais, a não-adesão ao tratamento ocorre em cerca de 50% dos casos e é responsável por inúmeros prejuízos, além de ser a principal causa de morbidade psiquiátrica. O presente estudo objetivou avaliar a adesão ao tratamento medicamentoso de pacientes atendidos em um Centro de Atenção Psicossocial (CAPS no Nordeste do Brasil. A avaliação da adesão ao tratamento foi feita através dos testes de Haynes-Sackett e Morisky-Green-Levine. Todos os pacientes cadastrados no CAPS foram incluídos no estudo (n = 101. Observou-se que apenas 11,88% dos pacientes aderiram ao tratamento medicamentoso. As principais razões para o não uso dos medicamentos foram: esquecimento (68,83%, sentir-se mal ap

  2. Un diálogo semiótico esclarecedor entre cine y teoría social

    Directory of Open Access Journals (Sweden)

    Córdoba, Marcelo

    2011-01-01

    Full Text Available [es] El propósito de este artículo es desarrollar un análisis sociosemiótico del largometraje Safe (1995, EEUU, T. Haynes, en tanto “fábula o ensayo icónico-simbólico” que nos sirve para reflexionar sobre algún aspecto del mundo social y/o subjetivo—enfoque propuesto por el semiótico uruguayo Fernando Andacht. Concretamente, analizaremos el film como un signo de los efectos que concebiblemente podrían ejercer, en el orden de la subjetividad, las propiedades estructurales de la “modernidad reflexiva” (A. Giddens, enfocada en su aspecto de “sociedad del riesgo” (U. Beck. El análisis procurará justificar la interpretación de Safe como una particular “ficción de pérdida de la identidad” (P. Ricoeur. Esta interpretación, por lo demás, arraiga en la siguiente tesis: el colapso vital que sufre el personaje de la historia sería consecuencia de la disolución de su “imagen corporal”. Esta disolución es entendida como efecto de una cierta vivencia del mundo, determinada, a su vez, por la mediación de las instituciones y los significados hegemónicos de la “sociedad del riesgo”. Adelantamos que, por cuanto la propuesta de Andacht se basa en la semiótica pragmática de C. S. Peirce, incluimos en el artículo una sección consagrada a bosquejar un esquema elemental de este complejo sistema teórico. [en] The purpose of this paper is to develop a sociosemiotic analysis of the film Safe (1995, USA, T. Haynes, as an “iconic-symbolic fable or essay” that helps us reflect on some aspect of the social and/or subjective world—an approach proposed by Uruguayan semiotician Fernando Andacht. Specifically, we analyze the film as a sign of the effects that the structural properties of “reflexive modernity” (A. Giddens, focused on its aspect of “risk society” (U. Beck, could conceivably bear on the domain of subjectivity. The analysis will seek to justify the interpretation of Safe as a particular “fiction of

  3. Alterações morfológicas e alocação de biomassa em plantas jovens de espécies florestais sob diferentes condições de sombreamento Morphologic alterations and biomass allocation in young plants of forestry species under different conditions of shading

    Directory of Open Access Journals (Sweden)

    Silvia Mara Zanela Almeida

    2005-02-01

    Full Text Available A seleção de espécies nativas e/ou exóticas para recuperação de ambientes degradados ou alterados pode ser baseada no potencial de aclimatação das espécies a diferentes níveis de luminosidade. Nesse contexto, o objetivo deste estudo foi avaliar o efeito do sombreamento (0%, 30% e 50% de interceptação da radiação solar incidente no crescimento, na alocação de biomassa e nos teores de clorofila total de plantas jovens de quatro espécies florestais de diferentes grupos ecológicos: Maclura tinctoria (L. D. Don ex Steud. (moreira, Senna macranthera (Collad. Irwin et Barn. (fedegoso, Hymenaea courbaril L. var. stilbocarpa (Hayne Lee et Lang. (jatobá e Acacia mangium Willd. (acácia. Os maiores teores de clorofila total foram observados em condições sombreadas, para todas as espécies. A espécie clímax exigente em luz (moreira, apresentou os maiores resultados de crescimento. Em condições de pleno sol, a espécie pioneira (acácia alocou mais biomassa em folhas enquanto que a espécie clímax exigente em luz (moreira produziu mais raízes. Estas observações evidenciam o potencial de aclimatação a diferentes condições de disponibilidade de irradiação, que deve ser considerado em programas de recuperação de ambientes degradados e manejo de áreas naturais.The selection of native and/or exotic species for recovery of degraded or perturbed environment can be associated with the acclimatation potential of species in different conditions of shading. In this context, the objective of this research was to evaluate the effect of shading (0%, 30% and 50% of interception of the incident solar radiation on growth, biomass allocation and chlorophyll levels in young plants of forestry species from different ecological groups: Maclura tinctoria (L. D. Don ex Steud. (moreira, Senna macranthera (Collad. Irwin et Barn. (fedegoso, Hymenaea courbaril L. var. stilbocarpa (Hayne Lee et Lang. (jatobá e Acacia mangium Willd. (acácia. The

  4. Smoke inhalation injury in a pregnant patient: a literature review of the evidence and current best practices in the setting of a classic case.

    Science.gov (United States)

    Roderique, Ensign Joseph D; Gebre-Giorgis, Abel A; Stewart, Dane H; Feldman, Michael J; Pozez, Andrea L

    2012-01-01

    For smoke inhalation injury of a pregnant woman, one must treat two patients and be aware of the potential effects of carbon monoxide (CO) and cyanide (CN) poisoning on both the mother and the fetus. In a pregnant woman, the size and age of the fetus and the degree of poisoning allow for tremendous variability in the toxicity of CO and CN and their respective treatment options. The authors will review a case of a 32-year-old woman who was at 37 weeks of gestation and admitted to the Evans-Haynes Burn Center after a house fire and received hydroxocobalamin (Cyanokit) for suspected CN poisoning. In addition, a review of the literature, current guidelines, and treatment options of inhalation injury during pregnancy will be discussed. The authors will focus only on the toxic components of smoke inhalation injury rather than the mechanical components from heat and particulate damage. Literature review clearly identifies that the treatment of pregnant women with inhalation injury remains a controversial subject. The use of hydroxocobalamin (Cyanokit) as a treatment modality for potential CN poisoning in a pregnant patient has not been reported in the literature. Animal studies have shown that combined CO and CN poisoning are more lethal than either one alone and at lower concentrations. Due to the synergistic effects of CO and CN, and because these two toxins concentrate at even higher levels in the fetus than the mother, the authors will clarify the urgent seriousness of prompt administration of hydroxocobalamin in a pregnant patient with suspected smoke inhalation injury. This case review details the treatment of a 32-year-old woman who was at 36 weeks of gestation on admission to the Evans-Haynes Burn Center. The authors will report her injuries and the course of treatment. Although burned and presenting with concomitant smoke inhalation injury, both the woman and her child fared well with no significant complications due to the smoke inhalation at 6 months of follow

  5. Dark Galaxies and Lost Baryons (IAU S244)

    Science.gov (United States)

    Davies, Jonathan I.; Disney, Michael J.

    2008-05-01

    Preface; Conference prelims; The HI that barked in the night M. J. Disney; The detection of dark galaxies in blind HI surveys J. I. Davies; Red haloes of galaxies - reservoirs of baryonic dark matter? E. Zackrisson, N. Bergvall, C. Flynn, G. Ostlin, G. Micheva and B. Baldwell; Constraints on dark and visible mass in galaxies from strong gravitational lensing S. Dye and S. Warren; Lost baryons at low redshift S. Mathur, F. Nicastro and R. Williams; Observed properties of dark matter on small spatial scales R. Wyse and G. Gilmore; The mass distribution in spiral galaxies P. Salucci; Connecting lost baryons and dark galaxies via QSO absorption lines T. Tripp; ALFALFA: HI cosmology in the local universe R. Giovanelli; The ALFALFA search for (almost) dark galaxies across the HI mass function M. Haynes; HI clouds detected towards Virgo with the Arecibo Legacy Fast ALFA Survey B. Kent; Cosmic variance in the HI mass function S. Schneider; The Arecibo Galaxy Environments Survey - potential for finding dark galaxies and results so far R. Minchin et al.; Free-floating HI clouds in the M81 group E. Brinks, F. Walter and E. Skillman; Where are the stars in dark galaxies J. Rosenberg, J. Salzer and J. Cannon; The halo by halo missing baryon problem S. McGaugh; The local void is really empty R. Tully; Voids in the local volume: a limit on appearance of a galaxy in a dark matter halo A. Tikhonov and A. Klypin; Dim baryons in the cosmic web C. Impey; A census of baryons in galaxy clusters and groups A. Gonzalez, D. Zaritsky and A. Zabludo; Statistical properties of the intercluster light from SDSS image stacking S. Zibetti; QSO strong gravitational lensing and the detection of dark halos A. Maccio; Strong gravitational lensing: bright galaxies and lost dark-matter L. Koopmans; Mapping the distribution of luminous and dark matter in strong lensing galaxies I. Ferreras, P. Saha, L. Williams and S. Burles; Tidal debris posing as dark galaxies P. Duc, F. Bournaud and E. Brinks

  6. Nitrogenous compounds, phenolic compounds and morphological aspects of leaves: comparison of deciduous and semideciduous arboreal legumes Compostos nitrogenados, fenólicos e aspecto morfológico em folhas: comparação entre leguminosas arbóreas semidecíduas e decíduas

    Directory of Open Access Journals (Sweden)

    Ana Lúcia da Silva Lima

    2006-02-01

    Full Text Available In general, perennial species contain higher concentrations of certain secondary compounds, such as phenolics, lower levels of nitrogenous compounds, and greater specific leaf mass (SLM than deciduous species. The aim of this study was to verify whether the comparative data reported in the literature regarding deciduous and evergreen species, also applies to four selected species of a semideciduous tropical forest (a remnant of the Atlantic Forest. The four species chosen for this study, each with apparently different leaf life spans, were two semideciduous (Hymenaea courbaril L. var. stilbocarpa (Hayne Lee et Lang., and Lonchocarpus guilleminianus (Tul. Malme, and two deciduous (Enterolobium contortisiliquum (Vell. Morong., and Peltophorum dubium (Spreng. Taub.. Plants were grown in a greenhouse in plastic pots containing soil taken from their natural habitat. Mature leaves were harvested for determination of the SLM and contents of phenolic compounds, tannins, nitrate, protein, free amino acids, chlorophyll, and nitrogen. Data registered are in agreement with those of the literature. Leaves with the longest life span had the highest content of phenolics and the lowest levels of tannins, nitrate, protein, amino acids, chlorophyll and nitrogen, as well as presenting the greatest SLM.Em geral as espécies perenifólias possuem maior concentração de alguns compostos secundários, como por exemplo fenóis, menor concentração de compostos nitrogenados e maior massa foliar específica (MFE, quando comparadas a espécies decíduas. O objetivo deste trabalho foi verificar se as observações encontradas na literatura, comparando espécies perenifólias e decíduas aplicam-se também a quatro espécies de uma mata semidecídua, remanescente da Mata Atlântica. Das quatro espécies usadas neste estudo, que aparentemente apresentavam longevidades foliares diferentes, duas eram semidecíduas (Hymenaea courbaril L. var. stilbocarpa (Hayne Lee et Lang. e

  7. Paleohydrologic investigations in the vicinity of Yucca Mountain: Late Quaternary paleobotanical and polynological records

    International Nuclear Information System (INIS)

    Spaulding, W.G.

    1994-01-01

    The primary objective of this research in the vicinity of the proposed Yucca Mountain Nuclear Waste Repository is the detection of episodes of increased runoff and groundwater discharge in this presently arid area. Ancient, inactive spring deposits in nearby valley bottoms (Haynes, 1967; Quade, 1986; Quade and Pratt, 1989), evidence for perennial water in presently dry canyons (Spaulding, 1992), and recent claims for extraordinary increases in precipitation during the last glacial age (Forester, 1994), provide good reason to further investigate both lowland spring-discharge habitats, and upland drainages. The ultimate purpose is to assess the long-term variability of the hydrologic system in the vicinity of Yucca Mountain in response to naturally occurring climatic changes. The data generated in the course of this study are derived from radiocarbon dated packrat (Neotoma) middens. This report presents the results of an initial assessment of the hydrologic stability of the candidate area based on a limited suite of middens from localities that, on geomorphic and hydrologic grounds, could have been close to ancient stream-side or spring environments. Paleoclimatic reconstructions are another means of studying the long-term climatic hydrologic stability of the Candidate Area include, and are also generated from packrat midden data. A different flora characterized the Candidate Area during the last glacial age in response to a cooler and wetter climate, and the plant species that comprised this flora can be used to reconstruct specific components of past climatic regimes. Thus, a secondary objective of this study is to compare the plant macrofossil data generated in this study to other records from the Candidate Area (Spaulding, 1985; Wigand, 1990) to determine if these new data are consistent with prior reconstructions. 66 refs., 4 figs., 13 tabs

  8. Design and evaluation of materials for space reactors

    International Nuclear Information System (INIS)

    Tavassoli, A.A.; Vrillon, B.; Robert, G.

    1990-01-01

    The French programme envisages a 20 kWe reactor, project ERATO, with three technological options. The first option is a sodium cooled reactor, derived from the fast breeder reactor technology, (upper core outlet temperature of 700 0 C). The second option is based on the High Temperature Gas-cooled Reactor technology (outlet temperature range 700 0 C-900 0 C). The third option is the reference solution, lithium cooled and UN fuelled fast spectrum reactor, (outlet temperature as high as 1200 0 C). The choice is essentially dominated by material considerations, and more specifically by the problems related to the compatibility with the cooling medium and to the high temperature creep resistance. For the first system limited work will be needed as the technology used is well experimented and there is a wealth of information on the austenitic stainless steel Type 316L-SPH. For the second system, most of the work has been concentrated on characterization of existing commercial alloys. This has included the preselection and the testing of a number of superalloys irradiated or not. The results obtained from high temperature tensile and creep tests have allowed selection of Haynes 230 as the primary candidate material and have also permitted calculation of allowable design stresses for this alloy. For the very high temperature system the French R and D programme has focused on Mo-Re alloys. The results obtained to this date from microstructural examinations and mechanical tests performed on different alloy compositions have allowed selection of Mo-25%Re for future optimization work. They have also shown the need for evaluation of creep properties at low stresses where microstructural instabilities are likely to occur as a result of long exposure to high temperature

  9. Evidence for Surface Water Ice in the Lunar Polar Regions Using Reflectance Measurements from the Lunar Orbiter Laser Altimeter and Temperature Measurements from the Diviner Lunar Radiometer Experiment

    Science.gov (United States)

    Fisher, Elizabeth A.; Lucey, Paul G.; Lemelin, Myriam; Greenhagen, Benjamin T.; Siegler, Matthew A.; Mazarico, Erwan; Aharonson, Oded; Williams, Jean-Pierre; Hayne, Paul O.; Neumann, Gregory A.; hide

    2017-01-01

    We find that the reflectance of the lunar surface within 5 deg of latitude of theSouth Pole increases rapidly with decreasing temperature, near approximately 110K, behavior consistent with the presence of surface water ice. The North polar region does not show this behavior, nor do South polar surfaces at latitudes more than 5 deg from the pole. This South pole reflectance anomaly persists when analysis is limited to surfaces with slopes less than 10 deg to eliminate false detection due to the brightening effect of mass wasting, and also when the very bright south polar crater Shackleton is excluded from the analysis. We also find that south polar regions of permanent shadow that have been reported to be generally brighter at 1064 nm do not show anomalous reflectance when their annual maximum surface temperatures are too high to preserve water ice. This distinction is not observed at the North Pole. The reflectance excursion on surfaces with maximum temperatures below 110K is superimposed on a general trend of increasing reflectance with decreasing maximum temperature that is present throughout the polar regions in the north and south; we attribute this trend to a temperature or illumination-dependent space weathering effect (e.g. Hemingway et al. 2015). We also find a sudden increase in reflectance with decreasing temperature superimposed on the general trend at 200K and possibly at 300K. This may indicate the presence of other volatiles such as sulfur or organics. We identified and mapped surfaces with reflectances so high as to be unlikely to be part of an ice-free population. In this south we find a similar distribution found by Hayne et al. 2015 based on UV properties. In the north a cluster of pixels near that pole may represent a limited frost exposure.

  10. Visual performance with sport-tinted contact lenses in natural sunlight.

    Science.gov (United States)

    Erickson, Graham B; Horn, Fraser C; Barney, Tyler; Pexton, Brett; Baird, Richard Y

    2009-05-01

    The use of tinted and clear contact lenses (CLs) in all aspects of life is becoming a more popular occurrence, particularly in athletic activities. This study broadens previous research regarding performance-tinted CLs and their effects on measures of visual performance. Thirty-three subjects (14 male, 19 female) were fitted with clear B&L Optima 38, 50% visible light transmission Amber and 36% visible light transmission Gray-Green Nike Maxsight CLs in an individualized randomized sequence. Subjects were dark-adapted with welding goggles before testing and in between subtests involving a Bailey-Lovie chart and the Haynes Distance Rock test. The sequence of testing was repeated for each lens modality. The Amber and Gray-Green lenses enabled subjects to recover vision faster in bright sunlight compared with clear lenses. Also, subjects were able to achieve better visual recognition in bright sunlight when compared with clear lenses. Additionally, the lenses allowed the subjects to alternate fixation between a bright and shaded target at a more rapid rate in bright sunlight as compared with clear lenses. Subjects preferred both the Amber and Gray-Green lenses over clear lenses in the bright and shadowed target conditions. The results of the current study show that Maxsight Amber and Gray-Green lenses provide better contrast discrimination in bright sunlight, better contrast discrimination when alternating between bright and shaded target conditions, better speed of visual recovery in bright sunlight, and better overall visual performance in bright and shaded target conditions compared with clear lenses.

  11. Processing of Advanced Cast Alloys for A-USC Steam Turbine Applications

    Science.gov (United States)

    Jablonski, Paul D.; Hawk, Jeffery A.; Cowen, Christopher J.; Maziasz, Philip J.

    2012-02-01

    The high-temperature components within conventional supercritical coal-fired power plants are manufactured from ferritic/martensitic steels. To reduce greenhouse-gas emissions, the efficiency of pulverized coal steam power plants must be increased to as high a temperature and pressure as feasible. The proposed steam temperature in the DOE/NETL Advanced Ultra Supercritical power plant is high enough (760°C) that ferritic/martensitic steels will not work for the majority of high-temperature components in the turbine or for pipes and tubes in the boiler due to temperature limitations of this class of materials. Thus, Ni-based superalloys are being considered for many of these components. Off-the-shelf forged nickel alloys have shown good promise at these temperatures, but further improvements can be made through experimentation within the nominal chemistry range as well as through thermomechanical processing and subsequent heat treatment. However, cast nickel-based superalloys, which possess high strength, creep resistance, and weldability, are typically not available, particularly those with good ductility and toughness that are weldable in thick sections. To address those issues related to thick casting for turbine casings, for example, cast analogs of selected wrought nickel-based superalloys such as alloy 263, Haynes 282, and Nimonic 105 have been produced. Alloy design criteria, melt processing experiences, and heat treatment are discussed with respect to the as-processed and heat-treated microstructures and selected mechanical properties. The discussion concludes with the prospects for full-scale development of a thick section casting for a steam turbine valve chest or rotor casing.

  12. Processing of Advanced Alloys for A-USC Steam Turbine Applications

    Energy Technology Data Exchange (ETDEWEB)

    Jablonski, P. D. [National Energy Technology Laboratory (NETL); Hawk, Jeffrey A. [National Energy Technology Laboratory (NETL); Cowen, Christopher J. [National Energy Technology Laboratory (NETL); Maziasz, Philip J [ORNL

    2010-01-01

    The high-temperature components within conventional supercritical coal-fired power plants are manufactured from ferritic/martensitic steels. To reduce greenhouse-gas emissions, the efficiency of pulverized coal steam power plants must be increased to as high a temperature and pressure as feasible. The proposed steam temperature in the DOE/NETL Advanced Ultra Supercritical power plant is high enough (760 C) that ferritic/martensitic steels will not work for the majority of high-temperature components in the turbine or for pipes and tubes in the boiler due to temperature limitations of this class of materials. Thus, Ni-based superalloys are being considered for many of these components. Off-the-shelf forged nickel alloys have shown good promise at these temperatures, but further improvements can be made through experimentation within the nominal chemistry range as well as through thermomechanical processing and subsequent heat treatment. However, cast nickel-based superalloys, which possess high strength, creep resistance, and weldability, are typically not available, particularly those with good ductility and toughness that are weldable in thick sections. To address those issues related to thick casting for turbine casings, for example, cast analogs of selected wrought nickel-based superalloys such as alloy 263, Haynes 282, and Nimonic 105 have been produced. Alloy design criteria, melt processing experiences, and heat treatment are discussed with respect to the as-processed and heat-treated microstructures and selected mechanical properties. The discussion concludes with the prospects for full-scale development of a thick section casting for a steam turbine valve chest or rotor casing.

  13. Changes In Mechanical Properties Of Heat Resisting Alloy For A Satellite Propulsion System After A Nitriding Process

    Science.gov (United States)

    Kagawa, Hideshi; Fujii, Go; Kajiwara, Kenichi; Kuroda, Daisuke; Suzuki, Takuya; Yamabe-Mitarai, Yoko; Murakami, Hideyuki; Ono, Yoshinori

    2012-07-01

    Haynes25 (L-605) is a common heat resistant alloy used in mono-propellant structures and screen materials for catalyst beds. The lifetime requirements for thrusters have expanded dramatically after studies conducted in the 1970s on mono-propellant materials used to extend the service life. The material design had long remained unchanged, and the L-605 was still used as thruster material due to its good heritage. However, some important incidents involving degradation were found during the test-unit break-up inspection following the thruster life tests. The Japanese research team focused on the L-605 degradations found on the catalyst bed screen mesh used for mono-propellant thruster and analysed the surface of the wire material and the cross- section of the wire screen mesh used in the life tests. The investigation showed that the degradation was caused by nitriding L-605 component elements. The team suggested that the brittle fracture was attributable to tungsten (W) carbides, which formed primarily in the grain boundaries, and chromium (Cr) nitride, which formed mainly in the parts in contact with the hot firing gas. The team also suggested the installation of a platinum coating on the material surface as a countermeasure L-605 nitric degradation. Inconel 625 is now selected as a mono-propellant structure material due to its marginal raw material characters and cost. The team believes that Inconel 625 does not form W carbides since it contains no tungsten component, but does contain Cr and Fe, which form nitrides easily. Therefore, the team agreed that for the Inconel 625, there was a need to evaluate changes in the microstructure and mechanical properties following exposure to hot nitrogen gases. This paper will describe these changes of Inconel 625.

  14. Summary of the Geocarto International Special Issue on "NASA Earth Science Satellite Data for Applications to Public Health" to be Published in Early 2014

    Science.gov (United States)

    Quattrochi, Dale A.

    2013-01-01

    At the 2011 Applied Science Public Health review held in Santa Fe, NM, it was announced that Dr. Dale Quattrochi from the NASA Marshall Space Flight Center, John Haynes, Program Manager for the Applied Sciences Public Health program at NASA Headquarters, and Sue Estes, Deputy Program Manager for the NASA Applied Sciences Public Health Program located at the Universities Space Research Association (USRA) at the National Space Science and Technology Center (NSSTC) in Huntsville, AL, would edit a special issue of the journal Geocarto International on "NASA Earth Science Satellite Data for Applications to Public Health". This issue would be focused on compiling research papers that use NASA Earth Science satellite data for applications to public health. NASA's Public Health Program concentrates on advancing the realization of societal and economic benefits from NASA Earth Science in the areas of infectious disease, emergency preparedness and response, and environmental health (e.g., air quality). This application area as a focus of the NASA Applied Sciences program, has engaged public health institutions and officials with research scientists in exploring new applications of Earth Science satellite data as an integral part of public health decision- and policy-making at the local, state and federal levels. Of interest to this special issue are papers submitted on are topics such as epidemiologic surveillance in the areas of infectious disease, environmental health, and emergency response and preparedness, national and international activities to improve skills, share data and applications, and broaden the range of users who apply Earth Science satellite data in public health decisions, or related focus areas.. This special issue has now been completed and will be published n early 2014. This talk will present an overview of the papers that will be published in this special Geocarto International issue.

  15. Advanced Development of a Compact 5-15 lbf Lox/Methane Thruster for an Integrated Reaction Control and Main Engine Propulsion System

    Science.gov (United States)

    Hurlbert, Eric A.; McManamen, John Patrick; Sooknanen, Josh; Studak, Joseph W.

    2011-01-01

    This paper describes the advanced development and testing of a compact 5 to 15 lbf LOX/LCH4 thruster for a pressure-fed integrated main engine and RCS propulsion system to be used on a spacecraft "vertical" test bed (VTB). The ability of the RCS thruster and the main engine to operate off the same propellant supply in zero-g reduces mass and improves mission flexibility. This compact RCS engine incorporates several features to dramatically reduce mass and parts count, to ease manufacturing, and to maintain acceptable performance given that specific impulse (Isp) is not the driver. For example, radial injection holes placed on the chamber body for easier drilling, and high temperature Haynes 230 were selected for the chamber over other more expensive options. The valve inlets are rotatable before welding allowing different orientations for vehicle integration. In addition, the engine design effort selected a coil-on-plug ignition system which integrates a relay and coil with the plug electrode, and moves some exciter electronics to avionics driver board. The engine injector design has small dribble volumes to target minimum pulse widths of 20 msec. and an efficient minimum impulse bit of less than 0.05 lbf-sec. The propellants, oxygen and methane, were chosen because together they are a non-toxic, Mars-forward, high density, space storable, and high performance propellant combination that is capable of pressure-fed and pump-fed configurations and integration with life support and power subsystems. This paper will present the results of the advanced development testing to date of the RCS thruster and the integration with a vehicle propulsion system.

  16. Aging and Phase Stability Studies of Alloy 22 FY08 Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Torres, S G

    2008-04-03

    This report is a compilation of work done over the past ten years in support of phase stability studies of Alloy 22 for the Yucca Mountain Project and contains information previously published, reported, and referenced. Most sections are paraphrased here for the convenience of readers. Evaluation of the fabrication processes involved in the manufacture of waste containers is important as these processes can have an effect on the metallurgical structure of an alloy. Because material properties such as strength, toughness, aging kinetics and corrosion resistance are all dependent on the microstructure, it is important that prototypes be built and evaluated for processing effects on the performance of the material. Of particular importance are welds, which have an as-cast microstructure with chemical segregation and precipitation of complex phases resulting from the welding process. The work summarized in this report contains information on the effects of fabrication processes such as solution annealing, stress mitigation, heat-to-heat variability, and welding on the kinetics of precipitation, mechanical, and corrosion properties. For a waste package lifetime of thousands of years, it is impossible to test directly in the laboratory the behavior of Alloy 22 under expected repository conditions. The changes that may occur in these materials must be accelerated. For phase stability studies, this is achieved by accelerating the phase transformations by increasing test temperatures above those anticipated in the proposed repository. For these reasons, Alloy 22 characterization specimens were aged at Lawrence Livermore National Laboratory (LLNL) Aging Facilities for times from 1 hour up to 8 years at temperatures ranging from 200-750 C. These data as well as the data from specimens aged at 260 C, 343 C, and 427 C for 100,028 hours at Haynes International will be used for performance confirmation and model validation.

  17. Transfer of learning between 2D and 3D sources during infancy: Informing theory and practice.

    Science.gov (United States)

    Barr, Rachel

    2010-06-01

    The ability to transfer learning across contexts is an adaptive skill that develops rapidly during early childhood. Learning from television is a specific instance of transfer of learning between a 2-Dimensional (2D) representation and a 3-Dimensional (3D) object. Understanding the conditions under which young children might accomplish this particular kind of transfer is important because by 2 years of age 90% of US children are viewing television on a daily basis. Recent research shows that children can imitate actions presented on television using the corresponding real-world objects, but this same research also shows that children learn less from television than they do from live demonstrations until they are at least 3 years old; termed the video deficit effect. At present, there is no coherent theory to account for the video deficit effect; how learning is disrupted by this change in context is poorly understood. The aims of the present review are (1) to review the conditions under which children transfer learning between 2D images and 3D objects during early childhood, and (2) to integrate developmental theories of memory processing into the transfer of learning from media literature using Hayne's (2004) developmental representational flexibility account. The review will conclude that studies on the transfer of learning between 2D and 3D sources have important theoretical implications for general developmental theories of cognitive development, and in particular the development of a flexible representational system, as well as policy implications for early education regarding the potential use and limitations of media as effective teaching tools during early childhood.

  18. Titan

    Science.gov (United States)

    Müller-Wodarg, Ingo; Griffith, Caitlin A.; Lellouch, Emmanuel; Cravens, Thomas E.

    2014-03-01

    Introduction I. C. F. Müller-Wodarg, C. A. Griffith, E. Lellouch and T. E. Cravens; Prologue 1: the genesis of Cassini-Huygens W.-H. Ip, T. Owen and D. Gautier; Prologue 2: building a space flight instrument: a P.I.'s perspective M. Tomasko; 1. The origin and evolution of Titan G. Tobie, J. I. Lunine, J. Monteux, O. Mousis and F. Nimmo; 2. Titan's surface geology O. Aharonson, A. G. Hayes, P. O. Hayne, R. M. Lopes, A. Lucas and J. T. Perron; 3. Thermal structure of Titan's troposphere and middle atmosphere F. M. Flasar, R. K. Achterberg and P. J. Schinder; 4. The general circulation of Titan's lower and middle atmosphere S. Lebonnois, F. M. Flasar, T. Tokano and C. E. Newman; 5. The composition of Titan's atmosphere B. Bézard, R. V. Yelle and C. A. Nixon; 6. Storms, clouds, and weather C. A. Griffith, S. Rafkin, P. Rannou and C. P. McKay; 7. Chemistry of Titan's atmosphere V. Vuitton, O. Dutuit, M. A. Smith and N. Balucani; 8. Titan's haze R. West, P. Lavvas, C. Anderson and H. Imanaka; 9. Titan's upper atmosphere: thermal structure, dynamics, and energetics R. V. Yelle and I. C. F. Müller-Wodarg; 10. Titan's upper atmosphere/exosphere, escape processes, and rates D. F. Strobel and J. Cui; 11. Titan's ionosphere M. Galand, A. J. Coates, T. E. Cravens and J.-E. Wahlund; 12. Titan's magnetospheric and plasma environment J.-E. Wahlund, R. Modolo, C. Bertucci and A. J. Coates.

  19. Thermal Stir Welding Development at Marshall Space Flight Center

    Science.gov (United States)

    Ding, Robert J.

    2008-01-01

    Solid state welding processes have become the focus of welding process development at NASA's Marshall Space Flight Center. Unlike fusion weld processes such as tungsten inert gas (TIG), variable polarity plasma arc (VPPA), electron beam (EB), etc., solid state welding processes do not melt the material during welding. The resultant microstructure can be characterized as a dynamically recrystallized morphology much different than the casted, dentritic structure typical of fusion weld processes. The primary benefits of solid state processes over fusion weld processes include superior mechanic properties and the elimination of thermal distortion and residual stresses. These solid state processes attributes have profoundly influenced the direction of advanced welding research and development within the NASA agency. Thermal Stir Welding (TSW) is a new solid state welding process being developed at the Marshall Space Flight Center. Unlike friction stir welding, the heating, stirring and forging elements of the weld process can be decoupled for independent control. An induction coil induces energy into a workpiece to attain a desired plastic temperature. An independently controlled stir rod, captured within non-rotating containment plates, then stirs the plasticized material followed by forging plates/rollers that work the stirred weld joint. The independent control (decoupling) of heating, stirring and forging allows, theoretically, for the precision control of microstructure morphology. The TSW process is being used to evaluate the solid state joining of Haynes 230 for ARES J-2X applications. It is also being developed for 500-in (12.5 mm) thick commercially pure grade 2 titanium for navy applications. Other interests include Inconel 718 and stainless steel. This presentation will provide metallurgical and mechanical property data for these high melting temperature alloys.

  20. Structure an dynamics in cavity quantum electrodynamics

    International Nuclear Information System (INIS)

    Kimble, H.J.

    1994-01-01

    Much of the theoretical background related to the radiative processes for atoms in the presence of boundaries comes from two often disjoint areas, namely cavity quantum electrodynamics and optical bistability with two-state atoms. While the former of these areas has been associated to a large degree with studies in a perturbative domain of altered associated to a large degree with studies in a perturbative domain of altered emission processes in the presence of boundaries other than those of free space, the latter is often viewed from the perspective of hysteresis cycles and device applications. With the exception of the laser, however, perhaps the most extensive investigations of quantum statistical processes in quantum optics are to be found in the literature on bistability with two-state atoms and on cavity QED. Unfortunately, the degree of overlap of these two areas has not always been fully appreciated. This circumstance is perhaps due in part to the fact that the investigation of dynamical processes in cavity QED has had as its cornerstone the Jaynes-Cummings problem, with extensions to include, for example, small amounts of dissipation. On the other hand, a principle aspect of the bistability literature has been the study of quantum fluctuations in open systems for which dissipation plays a central role, but for which the coherent quantum dynamics of the Haynes-Cummings model are to a large measure lost due to the usual assumption of large system size and weak coupling (as in the standard theory of the laser). 132 refs., 26 figs., 1 tab

  1. Investigation of Surface Treatments to Improve the Friction and Wear of Titanium Alloys for Diesel Engine Components

    Energy Technology Data Exchange (ETDEWEB)

    Blau, Peter J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Cooley, Kevin M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kirkham, Melanie J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bansal, Dinesh G. [Oak Ridge Associated Universities, TN (United States)

    2012-09-20

    This final report summarizes experimental and analytical work performed under an agreement between the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Office of Transportation Technologies, and UT-Battelle LLC. The project was directed by Jerry Gibbs, of the U.S. Department of Energy’s Propulsion Materials Program, with management by D. P. Stinton and J. A. Haynes of ORNL. Participants included Peter J. Blau (Principal Investigator), Kevin M. Cooley (senior technician), Melanie J. Kirkham (materials scientist) of the Materials Science and Technology Division or ORNL, and Dinesh G. Bansal, a post doctoral fellow employed by Oak Ridge Associated Universities (ORAU) and who, at the time of this writing, is an engineer with Cummins, Inc. This report covers a three-year effort that involved two stages. In the first stage, and after a review of the literature and discussions with surface treatment experts, a series of candidate alloys and surface treatments for titanium alloy (Ti-6Al-4V) was selected for initial screening. After pre-screening using an ASTM standard test method, the more promising surface treatments were tested in Phase 2 using a variable loading apparatus that was designed and built to simulate the changing load patterns in a typical connecting rod bearing. Information on load profiles from the literature was supplemented with the help of T.C. Chen and Howard Savage of Cummins, Inc. Considering the dynamic and evolving nature of materials technology, this report presents a snapshot of commercial and experimental bearing surface technologies for titanium alloys that were available during the period of this work. Undoubtedly, further improvements in surface engineering methods for titanium will evolve.

  2. EMERGING LEGAL ISSUES REGARDING CIVILIAN DRONE USAGE

    Directory of Open Access Journals (Sweden)

    Andrei-Alexandru STOICA

    2018-05-01

    Full Text Available Unmanned vehicles are becoming a common sighting in our day-to-day life and are soon going to become an important economic drive in creating workspaces and help achieve new milestones in human activities. As such, the technology revolving around the unmanned vehicles will push itself as much as it’s needed but with each achievement in the field of robotics a legal issue arises around how to use the newly acquired piece of technology in a public or private space and whether or not should such a technology be placed under a strict governmental control. As the saying by Prof. Henry W. Haynes (1879 goes “The possession of great powers and capacity for good implies equally great responsibilities in their employment. Where so much has been given much is required.” so does an unmanned vehicle and its operator must follow a degree of legal guidelines on how to properly use the gadget and to also to understand the legal limitations when interacting with other entities. This paper will focus on identifying and answering some legal issues regarding what is required for a drone to fly over an identifiable space, but also if the operator must have a document that was conferred by a state to acknowledge the skills of the pilot or should a software limitation be in place for national security safeguards. The paper will also tackle the issue of identifying legal documents from different states that can be applied to drone flight operations and also if different states have adopted sanctions to persons who did not abide to said legal norms.

  3. Brayton-Cycle Baseload Power Tower CSP System

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Bruce [Wilson Solarpower Corporation, Boston, MA (United States)

    2013-12-31

    The primary objectives of Phase 2 of this Project were:1. Engineer, fabricate, and conduct preliminary testing on a low-pressure, air-heating solar receiver capable of powering a microturbine system to produce 300kWe while the sun is shining while simultaneously storing enough energy thermally to power the system for up to 13 hours thereafter. 2. Cycle-test a high-temperature super alloy, Haynes HR214, to determine its efficacy for the system’s high-temperature heat exchanger. 3. Engineer the thermal energy storage system. This Phase 2 followed Wilson’s Phase 1, which primarily was an engineering feasibility study to determine a practical and innovative approach to a full Brayton-cycle system configuration that could meet DOE’s targets. Below is a summary table of the DOE targets with Wilson’s Phase 1 Project results. The results showed that a Brayton system with an innovative (low pressure) solar receiver with ~13 hours of dry (i.e., not phase change materials or molten salts but rather firebrick, stone, or ceramics) has the potential to meet or exceed DOE targets. Such systems would consist of pre-engineered, standardized, factory-produced modules to minimize on-site costs while driving down costs through mass production. System sizes most carefully analyzed were in the range of 300 kWe to 2 MWe. Such systems would also use off-the-shelf towers, blowers, piping, microturbine packages, and heliostats. Per DOE’s instructions, LCOEs are based on the elevation and DNI levels of Daggett, CA, for a 100 MWe power plant following 2 GWe of factory production of the various system components.

  4. Control rod upper pin and roller removal and replacement

    International Nuclear Information System (INIS)

    Giordano, B.

    1995-01-01

    There has been increasing utility interest in removing cobalt sources as a means to minimize dose rates and shipping costs associated with operations, maintenance, shipping and radioactive waste disposal. This activation product accounts for approximately 80% of the dose rates at a plant. Estimates suggest that older (original equipment) control rod blades (CRBs) using stellite rollers and Haynes Alloy 25 pins can contribute as much as 43% of the cobalt in the plant. Since CRBs are the most concentrated source of cobalt in the reactor vessel, pin and roller (P ampersand R) replacement will provide significant reductions in cobalt-60 levels. The reductions will be measurable within 2 years, and should plateau within 5 to 6 years. This paper described a new, simple, cost effective, field proven in-situ method to replace these high source term contributing components and return the CRB to the reactor core for continued service. The paper also briefly describes a methodology that has been developed to estimate the labor and material costs along with a man-rem dollar savings for removal of the upper P ampersand Rs from in-service CRBs purchased prior to 1982. This method permits comparison to the cost of early replacement of CRBs. The result of this study is an EXCEL spreadsheet cost/benefit analysis that can be made plant specific by incorporation of plant data. The Analysis shows that the removal of P ampersand Rs can be beneficial for a Co-60 contribution as low as 5-10%. Recent interest by non-utility radioactive material users in obtaining the removed P ampersand Rs may further increase the benefit and reduce the cost associated with in-situ removal

  5. Allelopathic effects of the invasive Prosopis juliflora (Sw. DC. on selected native plant species in Middle Awash, Southern Afar Rift of Ethiopia

    Directory of Open Access Journals (Sweden)

    Samuel Getachew

    2012-12-01

    Full Text Available The allelopathic effects of the invasive Prosopis juliflora (Sw. DC. was studied on seed germination and seedling growth of Acacia nilotica(L. Willd. ex Del., Acacia tortilis (Forssk. Hayne, Cenchrus ciliaris L. and Enteropogon rupestris (J.A. Schmidt A. Chev. Vegetation sampling in different habitat types in the area was made to identify the target plant species. Comparison of canopy characteristics among P. juliflora, A. nilotica and A. tortilis was also made to observe differences if any in canopy closure. P. juliflora was recorded in all habitat types in highest density and observed affecting the plant diversity there in. Its growth characteristics and dense thicket formation restrict light to the ground flora and hence diminishes plant diversity. Leaf, bark and root aqueous extract of P. juliflora at 0, 0.5, 0.8, 1, 2 and 6% wereprepared and their effect studied on germination percentage and seedling growth of the study plant species. Germination of A. nilotica and A. tortilis was not affected by all aqueous extracts of different organ parts of P. juliflora while leaf and root extracts at higher concentrations inhibited germination of C. ciliaris and E. rupestris. Shoot and root growth of the study species were inhibited by leaf and root at higher concentrations. Seed germination of all species except A. nilotica was inhibited by soil amended with decaying plant parts and under canopy soil. The effect is species specific and annuals (grasses and herbs were affected more than perennials. Leaf seems to contain greater number/amount of inhibitors than does root and bark. Bark seems to contain the least. Heavy accumulation of toxic substances at under canopy soil of P. juliflora may be one of the reasons for its invasiveness and low plant diversity.

  6. Paleohydrologic investigations in the vicinity of Yucca Mountain: Late Quaternary paleobotanical and polynological records

    Energy Technology Data Exchange (ETDEWEB)

    Spaulding, W.G.

    1994-10-05

    The primary objective of this research in the vicinity of the proposed Yucca Mountain Nuclear Waste Repository is the detection of episodes of increased runoff and groundwater discharge in this presently arid area. Ancient, inactive spring deposits in nearby valley bottoms (Haynes, 1967; Quade, 1986; Quade and Pratt, 1989), evidence for perennial water in presently dry canyons (Spaulding, 1992), and recent claims for extraordinary increases in precipitation during the last glacial age (Forester, 1994), provide good reason to further investigate both lowland spring-discharge habitats, and upland drainages. The ultimate purpose is to assess the long-term variability of the hydrologic system in the vicinity of Yucca Mountain in response to naturally occurring climatic changes. The data generated in the course of this study are derived from radiocarbon dated packrat (Neotoma) middens. This report presents the results of an initial assessment of the hydrologic stability of the candidate area based on a limited suite of middens from localities that, on geomorphic and hydrologic grounds, could have been close to ancient stream-side or spring environments. Paleoclimatic reconstructions are another means of studying the long-term climatic hydrologic stability of the Candidate Area include, and are also generated from packrat midden data. A different flora characterized the Candidate Area during the last glacial age in response to a cooler and wetter climate, and the plant species that comprised this flora can be used to reconstruct specific components of past climatic regimes. Thus, a secondary objective of this study is to compare the plant macrofossil data generated in this study to other records from the Candidate Area (Spaulding, 1985; Wigand, 1990) to determine if these new data are consistent with prior reconstructions. 66 refs., 4 figs., 13 tabs.

  7. Evidence for surface water ice in the lunar polar regions using reflectance measurements from the Lunar Orbiter Laser Altimeter and temperature measurements from the Diviner Lunar Radiometer Experiment

    Science.gov (United States)

    Fisher, Elizabeth A.; Lucey, Paul G.; Lemelin, Myriam; Greenhagen, Benjamin T.; Siegler, Matthew A.; Mazarico, Erwan; Aharonson, Oded; Williams, Jean-Pierre; Hayne, Paul O.; Neumann, Gregory A.; Paige, David A.; Smith, David E.; Zuber, Maria T.

    2017-08-01

    We find that the reflectance of the lunar surface within 5° of latitude of the South Pole increases rapidly with decreasing temperature, near ∼110 K, behavior consistent with the presence of surface water ice. The North polar region does not show this behavior, nor do South polar surfaces at latitudes more than 5° from the pole. This South pole reflectance anomaly persists when analysis is limited to surfaces with slopes less than 10° to eliminate false detection due to the brightening effect of mass wasting, and also when the very bright south polar crater Shackleton is excluded from the analysis. We also find that south polar regions of permanent shadow that have been reported to be generally brighter at 1064 nm do not show anomalous reflectance when their annual maximum surface temperatures are too high to preserve water ice. This distinction is not observed at the North Pole. The reflectance excursion on surfaces with maximum temperatures below 110 K is superimposed on a general trend of increasing reflectance with decreasing maximum temperature that is present throughout the polar regions in the north and south; we attribute this trend to a temperature or illumination-dependent space weathering effect (e.g. Hemingway et al., 2015). We also find a sudden increase in reflectance with decreasing temperature superimposed on the general trend at 200 K and possibly at 300 K. This may indicate the presence of other volatiles such as sulfur or organics. We identified and mapped surfaces with reflectances so high as to be unlikely to be part of an ice-free population. In this south we find a similar distribution found by Hayne et al. (2015) based on UV properties. In the north a cluster of pixels near that pole may represent a limited frost exposure.

  8. Engineering Database of Liquid Salt Thermophysical and Thermochemical Properties

    Energy Technology Data Exchange (ETDEWEB)

    Manohar S. Sohal; Matthias A. Ebner; Piyush Sabharwall; Phil Sharpe

    2010-03-01

    The purpose of this report is to provide a review of thermodynamic and thermophysical properties of candidate molten salt coolants, which may be used as a primary coolant within a nuclear reactor or heat transport medium from the Next Generation Nuclear Plant (NGNP) to a processing plant, for example, a hydrogen-production plant. Thermodynamic properties of four types of molten salts, including LiF-BeF2 (67 and 33 mol%, respectively; also known as FLiBe), LiF-NaF-KF (46.5, 11.5, and 52 mol%, also known as FLiNaK), and KCl-MgCl2 (67 and 33 mol%), and sodium nitrate-sodium nitrite-potassium nitrate (NaNO3–NaNO2–KNO3, (7-49-44 or 7-40-53 mol%) have been investigated. Limitations of existing correlations to predict density, viscosity, specific heat capacity, surface tension, and thermal conductivity, were identified. The impact of thermodynamic properties on the heat transfer, especially Nusselt number was also discussed. Stability of the molten salts with structural alloys and their compatibility with the structural alloys was studied. Nickel and alloys with dense Ni coatings are effectively inert to corrosion in fluorides but not so in chlorides. Of the chromium containing alloys, Hastelloy N appears to have the best corrosion resistance in fluorides, while Haynes 230 was most resistant in chloride. In general, alloys with increasing carbon and chromium content are increasingly subject to corrosion by the fluoride salts FLiBe and FLiNaK, due to attack and dissolution of the intergranular chromium carbide. Future research to obtain needed information was identified.

  9. Ethnobotanical study of medicinal plants used by Ribeirinhos in the North Araguaia microregion, Mato Grosso, Brazil.

    Science.gov (United States)

    Ribeiro, Reginaldo Vicente; Bieski, Isanete Geraldini Costa; Balogun, Sikiru Olaitan; Martins, Domingos Tabajara de Oliveira

    2017-06-09

    Currently, in many traditional communities, such as the riverine community in the North Araguaia microregion (Mato Grosso, Brazil), plant knowledge and use represent the main, if not the only, therapeutic resource for the maintenance of health and/or treatment of diseases. This study aimed to identify and document species of medicinal plants used by local experts from riverine communities in the North Araguaia microregion in Mato Grosso State, and to further chemical and pharmacological studies on species selected based on searches in the relevant literature. This is a cross-sectional ethnobotanical study, with non-probabilistic sampling (n =60), that applied the snowball method to select local riverine experts who understand medicinal plant use. Socio-demographic, ethnobotanical and ethnopharmacological data (vernacular name, uses, geographical origin, habit, method of preparation and part used) on medicinal plants were collected during semi-structured interviews. The results were analyzed by descriptive and quantitative means: indices of use-report (UR) were used to select plant species with therapeutic potential. In total, 309 plant species belonging to 86 botanical families were cited; 73% were native to Brazil, and Fabaceae was the most representative family (11.3%). Arboreal was the predominant life form (37.2%). The leaf was the most used part (28.9%). Infusion was the most commonly reported method of preparation (31.3%). The plants reported in the survey were indicated for 18 of the 22 ICD-10 disease categories. The disease categories most commonly cited were the infectious and parasitic diseases (IPD, 718 UR), digestive system diseases (DSD, 565 UR) and respiratory system diseases (RSD, 504 UR), representing 16.6%, 13.1% and 11.7%, respectively of the total UR. Dysphania ambrosioides L. was the most sighted in the IPD category 50 UR. Copaifera langsdorffii Desf. (133), Lafoensia pacari A. St.-Hil. (131), and Cecropia pachystachya Trécul (126) were the

  10. Contact Angle and Adhesion Dynamics and Hysteresis on Molecularly Smooth Chemically Homogeneous Surfaces.

    Science.gov (United States)

    Chen, Szu-Ying; Kaufman, Yair; Schrader, Alex M; Seo, Dongjin; Lee, Dong Woog; Page, Steven H; Koenig, Peter H; Isaacs, Sandra; Gizaw, Yonas; Israelachvili, Jacob N

    2017-09-26

    Measuring truly equilibrium adhesion energies or contact angles to obtain the thermodynamic values is experimentally difficult because it requires loading/unloading or advancing/receding boundaries to be measured at rates that can be slower than 1 nm/s. We have measured advancing-receding contact angles and loading-unloading adhesion energies for various systems and geometries involving molecularly smooth and chemically homogeneous surfaces moving at different but steady velocities in both directions, ±V, focusing on the thermodynamic limit of ±V → 0. We have used the Bell Theory (1978) to derive expressions for the dynamic (velocity-dependent) adhesion energies and contact angles suitable for both (i) dynamic adhesion measurements using the classic Johnson-Kendall-Roberts (JKR, 1971) theory of "contact mechanics" and (ii) dynamic contact angle hysteresis measurements of both rolling droplets and syringe-controlled (sessile) droplets on various surfaces. We present our results for systems that exhibited both steady and varying velocities from V ≈ 10 mm/s to 1 nm/s, where in all cases but one, the advancing (V > 0) and receding (V contact angles converged toward the same theoretical (thermodynamic) values as V → 0. Our equations for the dynamic contact angles are similar to the classic equations of Blake & Haynes (1969) and fitted the experimental adhesion data equally well over the range of velocities studied, although with somewhat different fitting parameters for the characteristic molecular length/dimension or area and characteristic bond formation/rupture lifetime or velocity. Our theoretical and experimental methods and results unify previous kinetic theories of adhesion and contact angle hysteresis and offer new experimental methods for testing kinetic models in the thermodynamic, quasi-static, limit. Our analyses are limited to kinetic effects only, and we conclude that hydrodynamic, i.e., viscous, and inertial effects do not play a role at the

  11. Brush Seals for Cryogenic Applications: Performance, Stage Effects, and Preliminary Wear Results in LN2 and LH2

    Science.gov (United States)

    Proctor, Margaret P.; Walker, James F.; Perkins, H. Douglas; Hoopes, Joan F.; Williamson, G. Scott

    1996-01-01

    Brush seals are compliant contacting seals and have significantly lower leakage than labyrinth seals in gas turbine applications. Their long life and low leakage make them candidates for use in rocket engine turbopumps. Brush seals, 50.8 mm (2 in.) in diameter with a nominal 127-micron (0.005-in.) radial interference, were tested in liquid nitrogen (LN2) and liquid hydrogen (LH2) at shaft speeds up to 35,000 and 65,000 rpm, respectively, and at pressure drops up to 1.21 MPa (175 psid) per brush. A labyrinth seal was also tested in liquid nitrogen to provide a baseline. The LN2 leakage rate of a single brush seal with an initial radial shaft interference of 127 micron (0.005 in.) measured one-half to one-third the leakage rate of a 12-tooth labyrinth seal with a radial clearance of 127 micron (0.005 in.). Two brushes spaced 7.21 micron (0.248 in.) apart leaked about one-half as much as a single brush, and two brushes tightly packed together leaked about three-fourths as much as a single brush. The maximum measured groove depth on the Inconel 718 rotor with a surface finish of 0.81 micron (32 microinch) was 25 micron (0.0010 in.) after 4.3 hr of shaft rotation in liquid nitrogen. The Haynes-25 bristles wore approximately 25 to 76 micron (0.001 to 0.003 in.) under the same conditions. Wear results in liquid hydrogen were significantly different. In liquid hydrogen the rotor did not wear, but the bristle material transferred onto the rotor and the initial 127 micron (0.005 in.) radial interference was consumed. Relatively high leakage rates were measured in liquid hydrogen. More testing is required to verify the leakage performance, to validate and calibrate analysis techniques, and to determine the wear mechanisms. Performance, staging effects, and preliminary wear results are presented.

  12. Toward a Unified View of the Moon's Polar Volatiles from the Lunar Reconnaissance Orbiter

    Science.gov (United States)

    Hayne, Paul

    2016-04-01

    Although the scientific basis for the possibility of water and other volatiles in the cold traps of the lunar polar regions was developed in the 1960's and '70's [1,2], only recently have the data become available to test the theories in detail. Furthermore, comparisons with other planetary bodies, particularly Mercury, have revealed surprising differences that may point to inconsistencies or holes in our understanding of the basic processes involving volatiles on airless bodies [3]. Addressing these gaps in understanding is critical to the future exploration of the Moon, for which water is an important scientific and engineering resource [4]. Launched in 2009, NASA's Lunar Reconnaissance Orbiter (LRO) has been acquiring data from lunar orbit for more than six years. All seven of the remote sensing instruments on the payload have now contributed significantly to advancing understanding of volatiles on the Moon. Here we present results from these investigations, and discuss attempts to synthesize the disparate information to create a self-consistent model for lunar volatiles. In addition to the LRO data, we must take into account results from earlier missions [5,6], ground-based telescopes [7], and sample analyses [8]. The results from these inter-comparisons show that water is likely available in useful quantities, but key additional measurements may be required to resolve remaining uncertainties. [1] Watson, K., Murray, B. C., & Brown, H. (1961), J. Geophys. Res., 66(9), 3033-3045. [2] Arnold, J. R. (1979), J. Geophys. Res. (1978-2012), 84(B10), 5659-5668. [3] Paige, D. A., Siegler, M. A., Harmon, J. K., Neumann, G. A., Mazarico, E. M., Smith, D. E., ... & Solomon, S. C. (2013), Science, 339(6117), 300-303. [4] Hayne, P. O., et al. (2014), Keck Inst. Space Studies Report. [5] Nozette, S., Lichtenberg, C. L., Spudis, P., Bonner, R., Ort, W., Malaret, E., ... & Shoemaker, E. M. (1996), Science, 274(5292), 1495-1498. [6] Pieters, C. M., Goswami, J. N., Clark, R. N

  13. Molten Chloride Salts for Heat Transfer in Nuclear Systems

    Science.gov (United States)

    Ambrosek, James Wallace

    2011-12-01

    A forced convection loop was designed and constructed to examine the thermal-hydraulic performance of molten KCl-MgCl2 (68-32 at %) salt for use in nuclear co-generation facilities. As part of this research, methods for prediction of the thermo-physical properties of salt mixtures for selection of the coolant salt were studied. In addition, corrosion studies of 10 different alloys were exposed to the KCl-MgCl2 to determine a suitable construction material for the loop. Using experimental data found in literature for unary and binary salt systems, models were found, or developed to extrapolate the available experimental data to unstudied salt systems. These property models were then used to investigate the thermo-physical properties of the LINO3-NaNO3-KNO 3-Ca(NO3), system used in solar energy applications. Using these models, the density, viscosity, adiabatic compressibility, thermal conductivity, heat capacity, and melting temperatures of higher order systems can be approximated. These models may be applied to other molten salt systems. Coupons of 10 different alloys were exposed to the chloride salt for 100 hours at 850°C was undertaken to help determine with which alloy to construct the loop. Of the alloys exposed, Haynes 230 had the least amount of weight loss per area. Nickel and Hastelloy N performed best based on maximum depth of attack. Inconel 625 and 718 had a nearly uniform depletion of Cr from the surface of the sample. All other alloys tested had depletion of Cr along the grain boundaries. The Nb in Inconel 625 and 718 changed the way the Cr is depleted in these alloys. Grain-boundary engineering (GBE) of Incoloy 800H improved the corrosion resistance (weight loss and maximum depth of attack) by nearly 50% as compared to the as-received Incoloy 800H sample. A high temperature pump, thermal flow meter, and pressure differential device was designed, constructed and tested for use in the loop, The heat transfer of the molten chloride salt was found to

  14. Convection enhanced delivery of panobinostat (LBH589-loaded pluronic nano-micelles prolongs survival in the F98 rat glioma model

    Directory of Open Access Journals (Sweden)

    Singleton WG

    2017-02-01

    Full Text Available WG Singleton,1,2 AM Collins,3 AS Bienemann,1 CL Killick-Cole,1 HR Haynes,4 DJ Asby,1 CP Butts,5 MJ Wyatt,1 NU Barua,1,2 SS Gill1,2 1Functional Neurosurgery Research Group, School of Clinical Sciences, University of Bristol, 2Department of Neurosurgery, North Bristol NHS Trust, 3Bristol Centre for Functional Nanomaterials, School of Physics, HH Wills Physics Laboratory, 4Brain Tumour Research Group, School of Clinical Sciences, 5School of Chemistry, University of Bristol, Bristol, UKBackground: The pan-histone deacetylase inhibitor panobinostat is a potential therapy for malignant glioma, but it is water insoluble and does not cross the blood–brain barrier when administered systemically. In this article, we describe the in vitro and in vivo efficacy of a novel water-soluble nano-micellar formulation of panobinostat designed for administration by convection enhanced delivery (CED.Materials and methods: The in vitro efficacy of panobinostat-loaded nano-micelles against rat F98, human U87-MG and M059K glioma cells and against patient-derived glioma stem cells was measured using a cell viability assay. Nano-micelle distribution in rat brain was analyzed following acute CED using rhodamine-labeled nano-micelles, and toxicity was assayed using immunofluorescent microscopy and synaptophysin enzyme-linked immunosorbent assay. We compared the survival of the bioluminescent syngenic F98/Fischer344 rat glioblastoma model treated by acute CED of panobinostat-loaded nano-micelles with that of untreated and vehicle-only-treated controls.Results: Nano-micellar panobinostat is cytotoxic to rat and human glioma cells in vitro in a dose-dependent manner following short-time exposure to drug. Fluorescent rhodamine-labelled nano-micelles distribute with a volume of infusion/volume of distribution (Vi/Vd ratio of four and five respectively after administration by CED. Administration was not associated with any toxicity when compared to controls. CED of

  15. Physiological and growth responses of two African species, Acacia karroo and Themeda triandra, to combined increases in CO2 and UV-B radiation

    International Nuclear Information System (INIS)

    Wand, S.J.E.; Midgley, G.F.; Musil, C.F.

    1996-01-01

    The interactive effects of increased carbon dioxide (CO 2 ) concentration and ultraviolet-B (UV-B, 280–320 nm) radiation on Acacia karroo Hayne, a C 3 tree, and Themeda triandra Forsk., a C 4 grass, were investigated. We tested the hypothesis that A. karroo would show greater CO 2 -induced growth stimulation than T. triandra, which would partially explain current encroachment of A. karroo into C4 grasslands, but that increased UV-B could mitigate this advantage. Seedlings were grown in open-top chambers in a greenhouse in ambient (360 μmol mol -1 ) and elevated (650 μmol mol-1) CO 2 , combined with ambient (1.56 to 8.66 kJ m -2 day -1 ) or increased (2.22 to 11.93 kJ m -2 day -1 ) biologically effective (weighted) UV-B irradiances. After 30 weeks, elevated CO 2 had no effect on biomass of A. karroo, despite increased net CO 2 assimilation rates. Interaction between UV-B and CO 2 on stomatal conductance was found, with conductances decreasing only where elevated CO 2 and UV-B were supplied separately. Increases in water use efficiencies, foliar starch concentrations, root nodule numbers and total nodule mass were measured in elevated CO 2 . Elevated UV-B caused only an increase in foliar carbon concentrations. In T. triandra, net CO 2 assimilation rates were unaffected in elevated CO 2 , but stomatal conductances and foliar nitrogen concentrations decreased, and water use efficiencies increased. Biomass of all vegetative fractions, particularly leaf sheaths, was increased in elevated CO 2 . and was accompanied by increased leaf blade lengths and individual leaf and leaf sheath masses. However, tiller numbers were reduced in elevated CO 2 . Significantly moderating effects of elevated UV-B were apparent only in individual masses of leaf blades and sheaths, and in total sheath and shoot biomass. The direct CO 2 -induced growth responses of the species therefore do not support the hypothesis of CO 2 -driven woody encroachment of C 4 grasslands. Rather, differential

  16. Assessment of Embrittlement of VHTR Structural Alloys in Impure Helium Environments

    Energy Technology Data Exchange (ETDEWEB)

    Crone, Wendy; Cao, Guoping; Sridhara, Kumar

    2013-05-31

    The helium coolant in high-temperature reactors inevitably contains low levels of impurities during steady-state operation, primarily consisting of small amounts of H{sub 2}, H{sub 2}O, CH{sub 4}, CO, CO{sub 2}, and N{sub 2} from a variety of sources in the reactor circuit. These impurities are problematic because they can cause significant long-term corrosion in the structural alloys used in the heat exchangers at elevated temperatures. Currently, the primary candidate materials for intermediate heat exchangers are Alloy 617, Haynes 230, Alloy 800H, and Hastelloy X. This project will evaluate the role of impurities in helium coolant on the stress-assisted grain boundary oxidation and creep crack growth in candidate alloys at elevated temperatures. The project team will: • Evaluate stress-assisted grain boundary oxidation and creep crack initiation and crack growth in the temperature range of 500-850°C in a prototypical helium environment. • Evaluate the effects of oxygen partial pressure on stress-assisted grain boundary oxidation and creep crack growth in impure helium at 500°C, 700°C, and 850°C respectively. • Characterize the microstructure of candidate alloys after long-term exposure to an impure helium environment in order to understand the correlation between stress-assisted grain boundary oxidation, creep crack growth, material composition, and impurities in the helium coolant. • Evaluate grain boundary engineering as a method to mitigate stress-assisted grain boundary oxidation and creep crack growth of candidate alloys in impure helium. The maximum primary helium coolant temperature in the high-temperature reactor is expected to be 850-1,000°C.Corrosion may involve oxidation, carburization, or decarburization mechanisms depending on the temperature, oxygen partial pressure, carbon activity, and alloy composition. These corrosion reactions can substantially affect long-term mechanical properties such as crack- growth rate and fracture

  17. Summary of thermocouple performance during advanced gas reactor fuel irradiation experiments in the advanced test reactor and out-of-pile thermocouple testing in support of such experiments

    Energy Technology Data Exchange (ETDEWEB)

    Palmer, A. J.; Haggard, DC; Herter, J. W.; Swank, W. D.; Knudson, D. L.; Cherry, R. S. [Idaho National Laboratory, P.O. Box 1625, MS 4112, Idaho Falls, ID, (United States); Scervini, M. [University of Cambridge, Department of Material Science and Metallurgy, 27 Charles Babbage Road, CB3 0FS, Cambridge, (United Kingdom)

    2015-07-01

    High temperature gas reactor experiments create unique challenges for thermocouple-based temperature measurements. As a result of the interaction with neutrons, the thermoelements of the thermocouples undergo transmutation, which produces a time-dependent change in composition and, as a consequence, a time-dependent drift of the thermocouple signal. This drift is particularly severe for high temperature platinum-rhodium thermocouples (Types S, R, and B) and tungsten-rhenium thermocouples (Type C). For lower temperature applications, previous experiences with Type K thermocouples in nuclear reactors have shown that they are affected by neutron irradiation only to a limited extent. Similarly, Type N thermocouples are expected to be only slightly affected by neutron fluence. Currently, the use of these nickel-based thermocouples is limited when the temperature exceeds 1000 deg. C due to drift related to phenomena other than nuclear irradiation. High rates of open-circuit failure are also typical. Over the past 10 years, three long-term Advanced Gas Reactor experiments have been conducted with measured temperatures ranging from 700 deg. C - 1200 deg. C. A variety of standard Type N and specialty thermocouple designs have been used in these experiments with mixed results. A brief summary of thermocouple performance in these experiments is provided. Most recently, out-of-pile testing has been conducted on a variety of Type N thermocouple designs at the following (nominal) temperatures and durations: 1150 deg. C and 1200 deg. C for 2,000 hours at each temperature, followed by 200 hours at 1250 deg. C and 200 hours at 1300 deg. C. The standard Type N design utilizes high purity, crushed MgO insulation and an Inconel 600 sheath. Several variations on the standard Type N design were tested, including a Haynes 214 alloy sheath, spinel (MgAl{sub 2}O{sub 4}) insulation instead of MgO, a customized sheath developed at the University of Cambridge, and finally a loose assembly

  18. New upper limits on the local metagalactic ionizing radiation density

    Science.gov (United States)

    Vogel, Stuart N.; Weymann, Ray; Rauch, Michael; Hamilton, Tom

    1995-01-01

    We have obtained H-alpha observations with the Maryland-Caltech Fabry-Perot Spectrometer attached to the Cassegrain focus of the 1.5 m telescope at Palomer Observatory in order to set limits on the number of ionizing photons from the local metagalactic radiation field. We have observed the SW component of the Haynes-Giovanelli cloud H I 1225+01, an intergalactic cloud which should be optimum for measuring the metagalactic flux because it is nearly opaque to ionizing photons, it does not appear to be significantly shielded from the metagalactic radiation field, and the limits on embedded or nearby ionizing sources are unusually low. For the area of the cloud with an H I column density greater than 10(exp 19)/sq cm we set a 2 sigma limit of 1.1 x 10(exp -19) ergs/sq cm/s/sq arcsec (20 mR) for the surface brightness of diffuse H-alpha. This implies a 2 sigma upper limit on the incident one-sided ionizing flux of Phi(sub ex) is less than 3 x 10(exp 4)/sq cm/s. For a radiation field of the form J(sub nu) is approximately nu(exp -1.4), this yields a firm 2 sigma upper limit on the local metagalactic photoionization rate of Gamma is less than 2 x 10(exp -13)/s, and an upper limit for the radiation field J(sub nu) at the Lyman limit of J(sub nu0) is less than 8 x 10(exp -23) ergs/sq cm/Hz/sr. We discuss previous efforts to constrain the metagalactic ionizing flux using H-alpha surface brightness observations and also other methods, and conclude that our result places the firmest upper limit on this flux. We also observed the 7 min diameter region centered on 3C 273 in which H-alpha emission at a velocity of approximately 1700 km/s was initially reported by Williams and Schommer. In agreement with T. B. Williams (private communication) we find the initial detection was spurious. We obtain a 2 sigma upper limit of 1.8 x 10(exp -19) ergs/sq cm/s/sq arcsec (32 mR) for the mean surface brightness of diffuse H-alpha, about a factor of 6 below the published value.

  19. Will the struggle for health equity and social justice be best served by a Framework Convention on Global Health?

    Science.gov (United States)

    Haynes, Leigh; Legge, David; London, Leslie; McCoy, David; Sanders, David; Schuftan, Claudio

    2013-06-14

    The idea of a Framework Convention for Global Health (FCGH), using the treaty-making powers of the World Health Organization (WHO), has been promoted as an opportunity to advance global health equity and the right to health. The idea has promise, but needs more thought regarding risks, obstacles, and strategies. The reform of global health governance must be based on a robust analysis of the political economy out of which the drivers of inequality and the denial of the right to health arise. Some of the published commentary has focused on using the proposed FCGH to institutionalize a paradigm change regarding international aid for health care, i.e., reconceptualizing such aid as obligatory, based on human solidarity rather than strategic considerations, based on global stability and national security. We warn against limiting the project to questions of inter-governmental financial transfers because of the risk of neglecting the underlying structural determinants of health injustice. Such neglect would help to legitimize an unjust and unsustainable global economic regime. We raise further questions about the strategic logic informing any campaign for a FCGH. The governments of the United States and Europe have put considerable effort into weakening WHO through tight donor controls, and it would require heavy pressure to persuade them to sign on to a FCGH. Generating such pressure would require strong popular mobilization around the local and diverse priorities of different communities across the globe, and recognition of a common need for effective regulation at the global level. We argue for a broad-based campaign from which the need for more effective global health regulation (and a FCGH) would emerge as a common theme arising from myriad more specific claims. This type of campaign would respond to local needs, and would also be understood within a global, political, and economic perspective. Copyright © 2013 Haynes, Legge, McCoy, Sanders, Schuftan. This is an

  20. Summary of Thermocouple Performance During Advanced Gas Reactor Fuel Irradiation Experiments in the Advanced Test Reactor and Out-of-Pile Thermocouple Testing in Support of Such Experiments

    Energy Technology Data Exchange (ETDEWEB)

    A. J. Palmer; DC Haggard; J. W. Herter; M. Scervini; W. D. Swank; D. L. Knudson; R. S. Cherry

    2011-07-01

    High temperature gas reactor experiments create unique challenges for thermocouple based temperature measurements. As a result of the interaction with neutrons, the thermoelements of the thermocouples undergo transmutation, which produces a time dependent change in composition and, as a consequence, a time dependent drift of the thermocouple signal. This drift is particularly severe for high temperature platinum-rhodium thermocouples (Types S, R, and B); and tungsten-rhenium thermocouples (Types C and W). For lower temperature applications, previous experiences with type K thermocouples in nuclear reactors have shown that they are affected by neutron irradiation only to a limited extent. Similarly type N thermocouples are expected to be only slightly affected by neutron fluxes. Currently the use of these Nickel based thermocouples is limited when the temperature exceeds 1000°C due to drift related to phenomena other than nuclear irradiation. High rates of open-circuit failure are also typical. Over the past ten years, three long-term Advanced Gas Reactor (AGR) experiments have been conducted with measured temperatures ranging from 700oC – 1200oC. A variety of standard Type N and specialty thermocouple designs have been used in these experiments with mixed results. A brief summary of thermocouple performance in these experiments is provided. Most recently, out of pile testing has been conducted on a variety of Type N thermocouple designs at the following (nominal) temperatures and durations: 1150oC and 1200oC for 2000 hours at each temperature, followed by 200 hours at 1250oC, and 200 hours at 1300oC. The standard Type N design utilizes high purity crushed MgO insulation and an Inconel 600 sheath. Several variations on the standard Type N design were tested, including Haynes 214 alloy sheath, spinel (MgAl2O4) insulation instead of MgO, a customized sheath developed at the University of Cambridge, and finally a loose assembly thermocouple with hard fired alumina

  1. Patients’ attention to and understanding of adverse drug reaction warnings

    Directory of Open Access Journals (Sweden)

    Tresa Muir McNeal

    2010-12-01

    Full Text Available Tresa Muir McNeal1, Colleen Y Colbert1, Christian Cable1, Curtis R Mirkes1, June G Lubowinski2, John D Myers11Department of Medicine, Texas A&M University System HSC College of Medicine, Scott & White Healthcare, Temple, TX, USA; 2RD Haynes Medical Library, Scott & White Healthcare, Temple, TX, USAIntroduction: Medications are critical to the management of patient conditions, and they can have significant effects on the success or failure of medical interventions. Patient perceptions of drug warnings play an important role in medication compliance and ultimately disease management. Several factors may affect patients’ understanding of drug warnings and drug labeling, including health literacy and interactions with physicians and pharmacists.Purpose: The purpose of this article is to provide a review of the literature related to patient perceptions of drug warnings and drug labeling. Descriptive articles and studies regarding patient perceptions and knowledge of adverse drug reaction warnings were reviewed.Methods: The following databases were utilized to search the literature related to patient perceptions of drug warnings: PubMed, Academic Search Premiere, CINAHL, Medline, Psych Info, Business Source Complete, Alternative Healthwatch, Health Source (both Nursing/Academic and Consumer additions, JSTOR, and Master File Premiere. For the purpose of this review, any peer-reviewed article was eligible. Exclusionary criteria included: articles published in languages other than English, articles/studies on patient perceptions of vaccines and chemotherapy, and articles related to perceptions of medications administered in the inpatient setting. Forty-six articles were included in the review.Results: Health literacy has been shown to have a major impact on patients’ ability to understand potential adverse reactions and instructions on correct dosing of medications. Direct communication with physicians and pharmacists is one of the most important and

  2. Evaluation of electrochemical techniques for measurement of fireside corrosion in thermal power plants; Utvaerdering av elektrokemiska tekniker foer maetning av roekgassidig hoegtemperaturkorrosion i pannor

    Energy Technology Data Exchange (ETDEWEB)

    Hjorrnhede, Anders

    2007-12-15

    The possibility to measure the corrosion rate on-line, in situ, is getting more and more interesting due to increased corrosion. The worsening may be a result of lower fuel quality or increased steam data due to raised efficiency demands. Also the use of inhibitors can be improved and the lifetime of important components can be increased. Today, virtually all corrosion measurements of materials used for waterwalls, superheaters, economisers and other heat-transferring surfaces are based on in-situ probe tests of coupons or rings. The aim of the project is to evaluate the practicability of commercial or semicommercial on-line in-situ corrosion probes for use in waste fired boilers. The target groups are owners of boilers, operators, service personnel but also boiler manufacturer and material producers. Since the use of on-line, in situ, corrosion probes is substantial, some of the most promising corrosion probes have been tested in a waste fired boiler in Hamburg, Germany. Tests in waste fired boiler have never before been performed. The MECO CB, a Linear Polarisation Resistance (LPR) corrosion probe from Coresto Oy, Finland was tested and from Lehrstuhl fuer Umweltverfahrenstechnik und Anlagentechnik (LUAT) der Universitaet Duisburg-Essen, Germany an Electrochemical Noise (EN) - probe was tested. From Pepperl + Fuchs both EN- and LPR-CorrTran corrosion sensors were tested. The test periods were lasting from 1050h to 3750h. The test materials were the low alloyed steel 15Mo3, the Ni-based super alloys Sanicro 63 and Haynes Hastelloy C-2000. The fluegas temperatures were 635 deg C or 520 deg C. The material temperatures were 440 deg C, 420 deg, 350 deg C and was swept from 400 deg C to 300 deg C. All probes are measuring a signal which has a correlation to the corrosion process, but the quantification procedure is not working well. The results achieved from the corrosion probes must be calibrated against corrosion rates measured by means of conventional corrosion

  3. The alfalfa “almost darks” campaign: Pilot VLA HI observations of five high mass-to-light ratio systems

    International Nuclear Information System (INIS)

    Cannon, John M.; Martinkus, Charlotte P.; Leisman, Lukas; Haynes, Martha P.; Giovanelli, Riccardo; Hallenbeck, Gregory; Jones, Michael

    2015-01-01

    We present new Very Large Array (VLA) H i spectral line imaging of five sources discovered by the ALFALFA extragalactic survey. These targets are drawn from a larger sample of systems that were not uniquely identified with optical counterparts during ALFALFA processing, and as such have unusually high H i mass to light ratios. The candidate “Almost Dark” objects fall into four broad categories: (1) objects with nearby H i neighbors that are likely of tidal origin; (2) objects that appear to be part of a system of multiple H i sources, but which may not be tidal in origin; (3) objects isolated from nearby ALFALFA H i detections, but located near a gas-poor early type galaxy; (4) apparently isolated sources, with no object of coincident redshift within ∼400 kpc. Roughly 75% of the 200 objects without identified counterparts in the α.40 database (Haynes et al. 2011) fall into category 1 (likely tidal), and were not considered for synthesis follow-up observations. The pilot sample presented here (AGC193953, AGC208602, AGC208399, AGC226178, and AGC233638) contains the first five sources observed as part of a larger effort to characterize H i sources with no readily identifiable optical counterpart at single dish resolution (3.′5). These objects span a range of H i mass [7.41 < log(M Hi ) < 9.51] and H i mass to B-band luminosity ratios (3 < M Hi /L B < 9). We compare the H i total intensity and velocity fields to optical imaging drawn from the Sloan Digital Sky Survey and to ultraviolet imaging drawn from archival GALEX observations. Four of the sources with uncertain or no optical counterpart in the ALFALFA data are identified with low surface brightness optical counterparts in Sloan Digital Sky Survey imaging when compared with VLA H i intensity maps, and appear to be galaxies with clear signs of ordered rotation in the H i velocity fields. Three of these are detected in far-ultraviolet GALEX images, a likely indication of star formation within the last few

  4. The alfalfa “almost darks” campaign: Pilot VLA HI observations of five high mass-to-light ratio systems

    Energy Technology Data Exchange (ETDEWEB)

    Cannon, John M.; Martinkus, Charlotte P. [Department of Physics and Astronomy, Macalester College, 1600 Grand Avenue, Saint Paul, MN 55105 (United States); Leisman, Lukas; Haynes, Martha P.; Giovanelli, Riccardo; Hallenbeck, Gregory; Jones, Michael, E-mail: jcannon@macalester.edu, E-mail: cmartink@macalester.edu, E-mail: leisman@astro.cornell.edu, E-mail: haynes@astro.cornell.edu, E-mail: riccardo@astro.cornell.edu, E-mail: hallenbg@union.edu, E-mail: jonesmg@astro.cornell.edu [Center for Radiophysics and Space Research, Space Sciences Building, Cornell University, Ithaca, NY 14853 (United States); and others

    2015-02-01

    We present new Very Large Array (VLA) H i spectral line imaging of five sources discovered by the ALFALFA extragalactic survey. These targets are drawn from a larger sample of systems that were not uniquely identified with optical counterparts during ALFALFA processing, and as such have unusually high H i mass to light ratios. The candidate “Almost Dark” objects fall into four broad categories: (1) objects with nearby H i neighbors that are likely of tidal origin; (2) objects that appear to be part of a system of multiple H i sources, but which may not be tidal in origin; (3) objects isolated from nearby ALFALFA H i detections, but located near a gas-poor early type galaxy; (4) apparently isolated sources, with no object of coincident redshift within ∼400 kpc. Roughly 75% of the 200 objects without identified counterparts in the α.40 database (Haynes et al. 2011) fall into category 1 (likely tidal), and were not considered for synthesis follow-up observations. The pilot sample presented here (AGC193953, AGC208602, AGC208399, AGC226178, and AGC233638) contains the first five sources observed as part of a larger effort to characterize H i sources with no readily identifiable optical counterpart at single dish resolution (3.′5). These objects span a range of H i mass [7.41 < log(M{sub Hi}) < 9.51] and H i mass to B-band luminosity ratios (3 < M{sub Hi}/L{sub B} < 9). We compare the H i total intensity and velocity fields to optical imaging drawn from the Sloan Digital Sky Survey and to ultraviolet imaging drawn from archival GALEX observations. Four of the sources with uncertain or no optical counterpart in the ALFALFA data are identified with low surface brightness optical counterparts in Sloan Digital Sky Survey imaging when compared with VLA H i intensity maps, and appear to be galaxies with clear signs of ordered rotation in the H i velocity fields. Three of these are detected in far-ultraviolet GALEX images, a likely indication of star formation within

  5. Stable annual pattern of water use by Acacia tortilis in Sahelian Africa.

    Science.gov (United States)

    Do, Frederic C; Rocheteau, Alain; Diagne, Amadou L; Goudiaby, Venceslas; Granier, André; Lhomme, Jean-Paul

    2008-01-01

    Water use by mature trees of Acacia tortilis (Forsk.) Hayne ssp. raddiana (Savi) Brenan var. raddiana growing in the northern Sahel was continuously recorded over 4 years. Water use was estimated from xylem sap flow measured by transient heat dissipation. Concurrently, cambial growth, canopy phenology, leaf water potential, climatic conditions and soil water availability (SWA) were monitored. In addition to the variation attributable to interannual variation in rainfall, SWA was increased by irrigation during one wet season. The wet season lasted from July to September, and annual rainfall ranged between 146 and 367 mm. The annual amount and pattern of tree water use were stable from year-to-year despite interannual and seasonal variations in SWA in the upper soil layers. Acacia tortilis transpired readily throughout the year, except for one month during the dry season when defoliation was at a maximum. Maximum water use of about 23 l (dm sapwood area)(-2) day(-1) was recorded at the end of the wet season. While trees retained foliage in the dry season, the decline in water use was modest at around 30%. Variation in predawn leaf water potential indicated that the trees were subject to soil water constraint. The rapid depletion of water in the uppermost soil layers after the wet season implies that there was extensive use of water from deep soil layers. The deep soil profile revealed (1) the existence of living roots at 25 m and (2) that the availability of soil water was low (-1.6 MPa) down to the water table at a depth of 31 m. However, transpiration was recorded at a predawn leaf water potential of -2.0 MPa, indicating that the trees used water from both intermediary soil layers and the water table. During the full canopy stage, mean values of whole-tree hydraulic conductance were similar in the wet and dry seasons. We propose that the stability of water use at the seasonal and annual scales resulted from a combination of features, including an extensive rooting

  6. Development of thin film oxygen transport membranes on metallic supports

    Energy Technology Data Exchange (ETDEWEB)

    Xing, Ye

    2012-04-25

    Asymmetric membrane structure has an attractive potential in the application of O{sub 2}/N{sub 2} gas separation membrane for the future membrane-based fossil fuel power plant using oxyfuel technology, which will reduce the carbon dioxide emission. The aim of this study is the development of a metal supported multi-layer membrane structure with a thin film top membrane layer and porous ceramic interlayers. Four perovskite materials were studied as candidate membrane materials. Material properties of these perovskite materials were investigated and compared. La{sub 0.58}Sr{sub 0.4}Co{sub 0.2}Fe{sub 0.8}O{sub 3-{delta}} (LSCF58428) showed sufficient oxygen permeability, an acceptable thermal expansion coefficient and a moderate sintering temperature. Alternatively, Ba{sub 0.5}Sr{sub 0.5}Co{sub 0.8}Fe{sub 0.2}O{sub 3-{delta}} (BSCF5582) is considered obtaining very high oxygen permeability but a higher thermal expansion and a lower thermal stability than LSCF58428. Four different Ni-based alloys were studied as candidate substrate materials in the asymmetric membrane structure. The chromia-scale alloys (Hastelloy X, Inconel 600 and Haynes 214) caused Cr poisoning of the membrane layer material LSCF58428 during high-temperature co-firing in air. NiCoCrAlY with a high Al content (12.7 wt%) was found to be the most promising substrate material. It showed a good chemical compatibility with perovskite materials at high temperatures. In order to bridge the highly porous substrate and the thin top membrane layer interlayers were developed. Two interlayers were coated by screen printing on the porous NiCoCrAlY substrate which was sintered at 1225 C in flowing H{sub 2} atmosphere. Screen printing pastes were optimized by investigating various solvent and binder combinations and various ceramic powder contents. The first interlayer significantly improved the surface quality and the surface pore size has been reduced from 30-50{mu}m on the substrate to few {mu}m on the first

  7. Conformational preferences of a chimeric peptide HIV-1 immunogen from the C4-V3 domains of gp120 envelope protein of HIV-1 CAN0A based on solution NMR: comparison to a related immunogenic peptide from HIV-1 RF.

    Science.gov (United States)

    Vu, H M; de Lorimier, R; Moody, M A; Haynes, B F; Spicer, L D

    1996-04-23

    A critical problem to overcome on HIV vaccine design is the variability among HIV strains. One strategy to solve this problem is the construction of multicomponent immunogens reflective of common HIV motifs. Currently, it is not known if these motifs should be based primarily on amino acid sequence or higher-order structure of the viral proteins of a combination of the two. In this paper, we report NMR-derived solution conformations for a sympathetic peptide taken from the C4 and V3 domains of HIV-1 CAN0A gp120 envelope protein. This peptide, designated T1-SP10CAN0(A), is compared to a recently reported C4-V3 peptide. T1-SP10RF(A) from the HIV-1 RF strain [de Lorimier et al. (1994) Biochemistry 33, 2055-2062], in terms of conformational features and immune responses in mice [Haynes et al. (1995) AIDS Res. Hum. Retroviruses 11, 211-221]. The T1 segment of 16 amino acids from the gp120 C4 domain is identical in both peptides and exhibits nascent helical character. The SP10 region, taken from the gp120 V3 loop, differs from that of T1-SP10RF(A) in both sequence and conformations. A reverse turn is observed at the conserved GPGX sequence. The rest of the Sp10 domain is extended with the exception of the last three residues which show evidence for a helical arrangement. Modeling of the turn region of the T1-SP10CAN0(A) peptide shows exposure of a continuous apolar stretch of side chains similar to that reported in the crystal structure of a V3 peptide from HIV-1 MN complexed with a monoclonal antibody [Rini et al. (1993) Proc. Natl. Acad. Sci. U.S.A. 90, 6325-6329]. this hydrophobic patch is interrupted by a charged Lys residue in the T1-SP10RF(A) peptide. This observation suggests that the HIV-1 CAN0A and HIV-1 RF C4-V3 peptides can induce widely different anti-HIV antibodies. consistent with immunogenic results.

  8. PREFACE: Quantum Dot 2010

    Science.gov (United States)

    Taylor, Robert A.

    2010-09-01

    These conference proceedings contain the written papers of the contributions presented at Quantum Dot 2010 (QD2010). The conference was held in Nottingham, UK, on 26-30 April 2010. The conference addressed topics in research on: 1. Epitaxial quantum dots (including self-assembled and interface structures, dots defined by electrostatic gates etc): optical properties and electron transport quantum coherence effects spin phenomena optics of dots in cavities interaction with surface plasmons in metal/semiconductor structures opto-electronics applications 2. Novel QD structures: fabrication and physics of graphene dots, dots in nano-wires etc 3. Colloidal quantum dots: growth (shape control and hybrid nanocrystals such as metal/semiconductor, magnetic/semiconductor) assembly and surface functionalisation optical properties and spin dynamics electrical and magnetic properties applications (light emitting devices and solar cells, biological and medical applications, data storage, assemblers) The Editors Acknowledgements Conference Organising Committee: Maurice Skolnick (Chair) Alexander Tartakovskii (Programme Chair) Pavlos Lagoudakis (Programme Chair) Max Migliorato (Conference Secretary) Paola Borri (Publicity) Robert Taylor (Proceedings) Manus Hayne (Treasurer) Ray Murray (Sponsorship) Mohamed Henini (Local Organiser) International Advisory Committee: Yasuhiko Arakawa (Tokyo University, Japan) Manfred Bayer (Dortmund University, Germany) Sergey Gaponenko (Stepanov Institute of Physics, Minsk, Belarus) Pawel Hawrylak (NRC, Ottawa, Canada) Fritz Henneberger (Institute for Physics, Berlin, Germany) Atac Imamoglu (ETH, Zurich, Switzerland) Paul Koenraad (TU Eindhoven, Nethehrlands) Guglielmo Lanzani (Politecnico di Milano, Italy) Jungil Lee (Korea Institute of Science and Technology, Korea) Henri Mariette (CNRS-CEA, Grenoble, France) Lu Jeu Sham (San Diego, USA) Andrew Shields (Toshiba Research Europe, Cambridge, UK) Yoshihisa Yamamoto (Stanford University, USA) Artur

  9. ARM Cloud Radar Simulator Package for Global Climate Models Value-Added Product

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Yuying [North Carolina State Univ., Raleigh, NC (United States); Xie, Shaocheng [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-05-01

    It has been challenging to directly compare U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Climate Research Facility ground-based cloud radar measurements with climate model output because of limitations or features of the observing processes and the spatial gap between model and the single-point measurements. To facilitate the use of ARM radar data in numerical models, an ARM cloud radar simulator was developed to converts model data into pseudo-ARM cloud radar observations that mimic the instrument view of a narrow atmospheric column (as compared to a large global climate model [GCM] grid-cell), thus allowing meaningful comparison between model output and ARM cloud observations. The ARM cloud radar simulator value-added product (VAP) was developed based on the CloudSat simulator contained in the community satellite simulator package, the Cloud Feedback Model Intercomparison Project (CFMIP) Observation Simulator Package (COSP) (Bodas-Salcedo et al., 2011), which has been widely used in climate model evaluation with satellite data (Klein et al., 2013, Zhang et al., 2010). The essential part of the CloudSat simulator is the QuickBeam radar simulator that is used to produce CloudSat-like radar reflectivity, but is capable of simulating reflectivity for other radars (Marchand et al., 2009; Haynes et al., 2007). Adapting QuickBeam to the ARM cloud radar simulator within COSP required two primary changes: one was to set the frequency to 35 GHz for the ARM Ka-band cloud radar, as opposed to 94 GHz used for the CloudSat W-band radar, and the second was to invert the view from the ground to space so as to attenuate the beam correctly. In addition, the ARM cloud radar simulator uses a finer vertical resolution (100 m compared to 500 m for CloudSat) to resolve the more detailed structure of clouds captured by the ARM radars. The ARM simulator has been developed following the COSP workflow (Figure 1) and using the capabilities available in COSP

  10. The heating of UO_2 kernels in argon gas medium on the physical properties of sintered UO_2 kernels

    International Nuclear Information System (INIS)

    Damunir; Sri Rinanti Susilowati; Ariyani Kusuma Dewi

    2015-01-01

    The heating of UO_2 kernels in argon gas medium on the physical properties of sinter UO_2 kernels was conducted. The heated of the UO_2 kernels was conducted in a sinter reactor of a bed type. The sample used was the UO_2 kernels resulted from the reduction results at 800 °C temperature for 3 hours that had the density of 8.13 g/cm"3; porosity of 0.26; O/U ratio of 2.05; diameter of 1146 μm and sphericity of 1.05. The sample was put into a sinter reactor, then it was vacuumed by flowing the argon gas at 180 mmHg pressure to drain the air from the reactor. After that, the cooling water and argon gas were continuously flowed with the pressure of 5 mPa with 1.5 liter/minutes velocity. The reactor temperature was increased and variated at 1200-1500 °C temperature and for 1-4 hours. The sinters UO_2 kernels resulted from the study were analyzed in term of their physical properties including the density, porosity, diameter, sphericity, and specific surface area. The density was analyzed using pycnometer with CCl_4 solution. The porosity was determined using Haynes equation. The diameters and sphericity were showed using the Dino-lite microscope. The specific surface area was determined using surface area meter Nova-1000. The obtained products showed the the heating of UO_2 kernel in argon gas medium were influenced on the physical properties of sinters UO_2 kernel. The condition of best relatively at 1400 °C temperature and 2 hours time. The product resulted from the study was relatively at its best when heating was conducted at 1400 °C temperature and 2 hours time, produced sinters UO_2 kernel with density of 10.14 gr/ml; porosity of 7 %; diameters of 893 μm; sphericity of 1.07 and specific surface area of 4.68 m"2/g with solidify shrinkage of 22 %. (author)

  11. Valoración del cumplimiento de los tratamientos hipoglucemiantes y antihipertensivos en Galicia (‘CumpleGa’

    Directory of Open Access Journals (Sweden)

    Fornos-Pérez JA

    2017-12-01

    Full Text Available Objetivo: Evaluar en las farmacias comunitarias (FC gallegas la prevalencia de la no adherencia terapéutica en diabetes e hipertensión arterial, identificando factores relacionados con el incumplimiento y la percepción de los pacientes sobre su tratamiento. Métodos: Estudio transversal descriptivo, aleatorizado, realizado en agosto y septiembre de 2016. Se seleccionaron pacientes mayores de edad, en tratamiento con hipoglucemiantes y/o antihipertensivos que llevaban al menos dos meses con la misma pauta terapéutica. Se midió el incumplimiento mediante la administración de tres cuestionarios: Batalla, Haynes-Sacket y Morisky-Green, en una hoja de recogida de datos que incluía los tres, además de las características demográficas de los pacientes. Resultados: Participaron 31 FC en 27 farmacias, que recogieron 1.588 (muestra necesaria: 1.537 cuestionarios válidos: 778 (49,0% mujeres y 810 (51,0% hombres, de edad media 67,6±11,1 años. El número de pacientes incumplidores al menos en uno de los tres tests fue de 1.245 (78,4%. El incumplimiento medio resultó del 42,6%. La percepción de los pacientes sobre su tratamiento fue negativa en el 35,6%. El 51,0% desconoce las complicaciones de su enfermedad, el 33,1% olvida tomar su medicación y el 29,5% no cree que los medicamentos que tienen prescritos sean los adecuados. Conclusiones: El incumplimiento de las pautas terapéuticas de DM y HTA en Galicia es elevado, afectando casi a la mitad de los pacientes. Mal conocimiento sobre la enfermedad, menor nivel de estudios, polimedicación, situación pensionista (mayor edad y percepción negativa sobre sus medicamentos parecen relacionarse con una peor prevalencia del incumplimiento de los tratamientos.

  12. Long-term oxygen therapy in COPD patients: population-based cohort study on mortality

    Directory of Open Access Journals (Sweden)

    Pavlov N

    2018-03-01

    Full Text Available Nikolay Pavlov,1 Alan Gary Haynes,2,3 Armin Stucki,4 Peter Jüni,5 Sebastian Robert Ott1 1Department of Pulmonary Medicine, University Hospital (Inselspital, University of Bern, Bern, Switzerland; 2CTU Bern, University of Bern, Bern, Switzerland; 3Institute of Social and Preventive Medicine (ISPM, University of Bern, Bern, Switzerland; 4Department of Internal Medicine, Spital Thun, Thun, Switzerland; 5Applied Health Research Centre, Li Ka Shing Knowledge Institute of St Michael’s Hospital, Department of Medicine, University of Toronto, Toronto, ON, Canada Purpose: Chronic obstructive pulmonary disease (COPD is the fourth leading cause of death worldwide and is associated with a growing and substantial socioeconomic burden. Long-term oxygen therapy (LTOT, recommended by current treatment guidelines for COPD patients with severe chronic hypoxemia, has shown to reduce mortality in this population. The aim of our study was to assess the standardized mortality ratios of incident and prevalent LTOT users and to identify predictors of mortality. Patients and methods: We conducted a 2-year follow-up population-based cohort study comprising all COPD patients receiving LTOT in the canton of Bern, Switzerland. Comparing age- and sex-adjusted standardized mortality ratios, we examined associations between all-cause mortality and patient characteristics at baseline. To avoid immortal time bias, data for incident (receiving LTOT <6 months and prevalent users were analyzed separately. Results: At baseline, 475 patients (20% incident users, n=93 were receiving LTOT because of COPD (48/100,000 inhabitants. Mortality of incident and prevalent LTOT users was 41% versus 27%, respectively, p<0.007, and standardized mortality ratios were 8.02 (95% CI: 5.64–11.41 versus 5.90 (95% CI: 4.79–7.25, respectively. Type 2 respiratory failure was associated with higher standardized mortality ratios among incident LTOT users (60.57, 95% CI: 11.82–310.45, p=0

  13. Benefits of Hot Isostatic Pressure/Powdered Metal (HIP/PM) and Additive Manufacturing (AM) To Fabricate Advanced Energy System Components

    Energy Technology Data Exchange (ETDEWEB)

    Horton, Nancy [Energy Industries of Ohio, Cleveland, OH (United States); Sheppard, Roy [Energy Industries of Ohio, Cleveland, OH (United States)

    2016-12-31

    Advanced Energy systems require large, complex components produced from materials capable of withstanding severe operating environments (high temperature, pressure, corrosivity). Such parts can be difficult to source, as conventional material processing technologies must be tailored to ensure a safe and cost effective approach to large-scale manufacture of quality structural advanced alloy components that meet the performance specifications of AE systems. (HIP/PM) has shown advantages over other manufacturing methods when working with these materials. For example, using HIP’ing in lieu of casting means significant savings in raw material costs, which for expensive, high-nickel alloys can be considerable for large-scale production. Use of HIP/PM also eliminates the difficulties resulting from reactivity of these materials in the molten state and facilitates manufacture of the large size requirements of the AE industry, producing a part that is defect and porosity free, thus further reducing or eliminating time and expense of post processing machining and weld repair. New advances in Additive Manufacturing (AM) techniques make it possible to further expand the benefits of HIP/PM in producing AE system components to create an even more robust manufacturing approach. Traditional techniques of welding and forming sheet metal to produce the HIP canisters can be time consuming and costly, with limitations on the complexity of part which can be achieved. A key benefit of AM is the freedom of design that it offers, so use of AM could overcome such challenges, ultimately enabling redesign of complete energy systems. A critical step toward this goal is material characterization of the required advanced alloys, for use in AM. Using Haynes 282, a high nickel alloy of interest to the Fossil Energy community, particularly for Advanced-UltraSuperCritical (AUSC) operating environments, as well as the crosscutting interests of the aerospace, defense and medical markets, this

  14. Next Generation Nuclear Plant Steam Generator and Intermediate Heat Exchanger Materials Research and Development Plan

    Energy Technology Data Exchange (ETDEWEB)

    J. K. Wright

    2010-09-01

    application in heat exchangers and core internals for the NGNP. The primary candidates are Inconel 617, Haynes 230, Incoloy 800H and Hastelloy XR. Based on the technical maturity, availability in required product forms, experience base, and high temperature mechanical properties all of the vendor pre-conceptual design studies have specified Alloy 617 as the material of choice for heat exchangers. Also a draft code case for Alloy 617 was developed previously. Although action was suspended before the code case was accepted by ASME, this draft code case provides a significant head start for achieving codification of the material. Similarly, Alloy 800H is the material of choice for control rod sleeves. In addition to the above listed considerations, Alloy 800H is already listed in the nuclear section of the ASME Code; although the maximum use temperature and time need to be increased.

  15. Next Generation Nuclear Plant Intermediate Heat Exchanger Materials Research and Development Plan (PLN-2804)

    Energy Technology Data Exchange (ETDEWEB)

    J. K. Wright

    2008-04-01

    application in heat exchangers and core internals for the NGNP. The primary candidates are Inconel 617, Haynes 230, Incoloy 800H and Hastelloy XR. Based on the technical maturity, availability in required product forms, experience base, and high temperature mechanical properties all of the vendor pre-conceptual design studies have specified Alloy 617 as the material of choice for heat exchangers. Also a draft code case for Alloy 617 was developed previously. Although action was suspended before the code case was accepted by ASME, this draft code case provides a significant head start for achieving codification of the material. Similarly, Alloy 800H is the material of choice for control rod sleeves. In addition to the above listed considerations, Alloy 800H is already listed in the nuclear section of the ASME Code; although the maximum use temperature and time need to be increased.

  16. Diversidade de angiospermas e espécies medicinais de uma área de Cerrado

    Directory of Open Access Journals (Sweden)

    A.F. SILVA

    2015-01-01

    Full Text Available RESUMO Este trabalho teve como objetivo conhecer a diversidade vegetal de uma área de Cerrado em Prudente de Morais, MG, bem como suas indicações medicinais. Foram feitas nove excursões à reserva da Fazenda Experimental Santa Rita da Empresa de Pesquisa Agropecuária de Minas Gerais (FESR/EPAMIG (19°26’20”’ S e 44°09’15”’ W. O material vegetal coletado foi herborizado, identificado e incorporado ao acervo do Herbário PAMG/EPAMIG. O sistema de classificação utilizado foi o APG III. Após a identificação, realizou-se uma pesquisa bibliográfica buscando dados sobre a utilização medicinal das espécies. Coletaram-se 108 espécies pertencentes a 47 famílias. As famílias mais representativas foram: Fabaceae, com 16 espécies, Myrtaceae com sete espécies, Asteraceae e Rubiaceae com seis espécies cada, Malpighiaceae e Solanaceae com cinco espécies cada, Erythroxylaceae, Euphorbiaceae e Vochysiaceae, com quatro espécies cada, Anacardiaceae, Apocynaceae, Lamiaceae e Sapindaceae com três espécies cada, Annonaceae, Arecaceae, Bignoniaceae, Celastraceae e Primulaceae com duas espécies cada. Vinte e nove famílias foram monoespecíficas. Das 108 espécies, 39 são árvores (36%, 43 arbustos (40%, seis subarbustos (5,5%, 14 lianas (13% e seis são ervas (5,5%. Sessenta e seis (61% espécies pertencentes a 39 famílias (83% são utilizadas popularmente, para o tratamento de alguma doença. As famílias com maior número de espécies medicinais foram: Fabaceae com oito espécies; Rubiaceae com cinco espécies e Solanaceae com quatro espécies. As espécies que apresentaram mais finalidades terapêuticas foram: Brosimum gaudichaudii Trécul (Moraceae, Caryocar brasiliense Cambess. (Caryocaraceae, Cochlospermum regium (Mart. ex Schrank Pilg. (Bixaceae, Croton urucurana Bail. (Euphorbiaceae, Gomphrena officinalis Mart. (Amaranthaceae, Hymenaea stigonocarpa Mart. ex Hayne (Fabaceae, Lithrea molleoides (Vell. Engl. (Anacardiaceae

  17. Structure of the community of nesting birds in a ravine oak wood in the valley of the Oskol river

    Directory of Open Access Journals (Sweden)

    A. A. Atemasov

    2016-10-01

    Full Text Available This investigation was carried out in a forest on the southern borders of the Central-Russian Upland, on the Prioskolsky plateau, in the Srednedonskoy subprovince of the Pontic steppe province. The aim of this work is to identify the peculiarities of structure and ways of formation of the breeding population of ravine oak forests on the border of two geographic zones. The objectives of the work were to describe quantitative and qualitative characteristics of the population of the nesting birds of ravine oak forests, as well as provide an analysis of the faunogenesic structure of the nesting bird population. To obtain data on the species composition and density of nesting birds we used the line transect method by D. Hayne – Y. Ravkin. The surveys were carried out in 2011–2015 three times per season (April to June. The indicators of the breeding density of each bird species and the totals for each year were calculated. The Polydominant Simpson index was used to characterize species diversity. To evaluate the uniformity we used the calibrated version of G ‘Alatalo index F’. The calculations were performed using the program PAST. In total we observed 34 species of birds over the 5 years of research. The dynamics of the total density of breeding birds in the period researched (2011–2015 showed a maximum in 2013 (1,711 pairs/km2; the average index for the 5 years was 1,288 ± 133 pairs/km2, which is similar to the characteristics of the populations of birds forests of the steppe zone (Donetsk Ridge, Azov Upland. The dominant and subdominant species comprised 32.2–54.7% of the population, indicating a balanced community, in spite of the insular nature of the forest. The absolute dominant in all years was the Chaffinch (an average of 21.2% of the population; subdominant species were the Robin (11.2%, Great Tit (10.5% and the Collared Flycatcher (10.3%. Over a third of the total number of birds are the hollow-nesting birds (37.1%; species

  18. Is it possible to diagnose the therapeutic adherence of patients with COPD in clinical practice? A cohort study

    Directory of Open Access Journals (Sweden)

    Prados-Torres Daniel

    2011-01-01

    Full Text Available Abstract Background Therapeutic adherence of patients with chronic obstructive pulmonary disease (COPD is poor. It is therefore necessary to determine the magnitude of non-adherence to develop strategies to correct this behaviour. The purpose of this study was to analyse the diagnostic validity of indirect adherence methods. Methods Sample: 195 COPD patients undergoing scheduled inhaled treatment attending 5 Primary Care Centres of Malaga, Spain. Variables: Sociodemographic profile, illness data, spirometry, quality of life (St. George Respiratory Questionnaire: SGRQ, and inhaled medication counting (count of dose/pill or electronic monitoring were collected. The patient's knowledge of COPD (Batalla test:BT,their attitude towards treatment (Morisky-Green test: MGT and their self-reported therapeutic adherence (Haynes-Sackett test: HST were used as methods of evaluating adherence. The follow-up consisted four visits over one year (the recruitment visit: V0; and after 1 month:V1; 6 months:V2; and 1 year:V3. Results The mean age was 69.59 (95% CI, 68.29-70.89 years old and 93.8% were male. Other findings included: 85.4% had a low educational level, 23.6% were smokers, 71.5% mild-moderate COPD stage with a FEV1 = 56.86 (SD = 18.85; exacerbations per year = 1.41(95% CI, 1-1.8. The total SGRQ score was 44.96 (95% CI, 42.46-47.46, showing a mild self-perceived impairment in health. The prevalence of adherence (dose/pill count was 68.1% (95% CI, 60.9-75.3 at V1, 80% (95% CI, 73-87 at V2 and 84% (95% CI, 77.9 at V3. The MGT showed a specificity of 67.34% at V1, 76.19% at V2 and 69.62% at V3. The sensitivity was 53.33% at V1, 66.66% at V2 and 33.33% at V3.The BT showed a specificity of 55.1% at V1, 70.23% at V2 and 67.09% at V3. The sensitivity was 68.88% at V1, 71.43% at V2 and 46.66% at V3. Considering both tests together, the specificity was 86.73% at V1, 94.04% at V2 and 92.49% at V3 and the sensitivity was 37.77% at V1, 47.62% at V2 and 13.3% at V3

  19. Design, analysis, and initial testing of a fiber-optic shear gage for three-dimensional, high-temperature flows

    Science.gov (United States)

    Orr, Matthew W.

    This investigation concerns the design, analysis, and initial testing of a new, two-component wall shear gage for 3D, high-temperature flows. This gage is a direct-measuring, non-nulling design with a round head surrounded by a small gap. Two flexure wheels are used to allow small motions of the floating head. Fiber-optic displacement sensors measure how far the polished faces of counterweights on the wheels move in relation to a fixed housing as the primary measurement system. No viscous damping was required. The gage has both fiber-optic instrumentation and strain gages mounted on the flexures for validation of the newer fiber optics. The sensor is constructed of Haynes RTM 230RTM, a high-temperature nickel alloy. The gage housing is made of 316 stainless steel. All components of the gage in pure fiber-optic form can survive to a temperature of 1073 K. The bonding methods of the backup strain gages limit their maximum temperature to 473 K. The dynamic range of the gage is from 0--500 Pa (0--10g) and higher shears can be measured by changing the floating head size. Extensive use of finite element modeling was critical to the design and analysis of the gage. Static structural, modal, and thermal analyses were performed on the flexures using the ANSYS finite element package. Static finite element analysis predicted the response of the flexures to a given load, and static calibrations using a direct force method confirmed these results. Finite element modal analysis results were within 16.4% for the first mode and within 30% for the second mode when compared with the experimentally determined modes. Vibration characteristics of the gage were determined from experimental free vibration data after the gage was subjected to an impulse. Uncertainties in the finished geometry make this level of error acceptable. A transient thermal analysis examined the effects of a very high heat flux on the exposed head of the gage. The 100,000 W/m2 heat flux used in this analysis is

  20. Re-Os systematics and geochemistry of cobaltite (CoAsS) in the Idaho cobalt belt, Belt-Purcell Basin, USA: Evidence for middle Mesoproterozoic sediment-hosted Co-Cu sulfide mineralization with Grenvillian and Cretaceous remobilization

    Science.gov (United States)

    Saintilan, N.J.; Creaser, R.A.; Bookstrom, Arthur A.

    2017-01-01

    We report the first study of the Re-Os systematics of cobaltite (CoAsS) using disseminated grains and massive sulfides from samples of two breccia-type and two stratabound deposits in the Co-Cu-Au Idaho cobalt belt (ICB), Lemhi subbasin to the Belt-Purcell Basin, Idaho, USA. Using a 185Re + 190Os spike solution, magnetic and non-magnetic fractions of cobaltite mineral separates give reproducible Re-Os analytical data for aliquot sizes of 150 to 200 mg. Cobaltite from the ICB has highly radiogenic 187Os/188Os ratios (17–45) and high 187Re/188Os ratios (600–1800) but low Re and total Os contents (ca. 0.4–4 ppb and 14–64 ppt, respectively). Containing 30 to 74% radiogenic 187Os, cobaltite from the ICB is amenable to Re-Os age determination using the isochron regression approach.Re-Os data for disseminated cobaltite mineralization in a quartz-tourmaline breccia from the Haynes-Stellite deposit yield a Model 1 isochron age of 1349 ± 76 Ma (2σ, n = 4, mean squared weighted deviation MSWD = 2.1, initial 187Os/188Os ratio = 4.7 ± 2.2). This middle Mesoproterozoic age is preserved despite a possible metamorphic overprint or a pulse of metamorphic-hydrothermal remobilization of pre-existing cobaltite that formed along fold cleavages during the ca. 1190–1006 Ma Grenvillian orogeny. This phase of remobilization is tentatively identified by a Model 3 isochron age of 1132 ± 240 Ma (2σ, n = 7, MSWD = 9.3, initial 187Os/188Os ratio of 9.0 ± 2.9) for cobaltite in the quartz-tourmaline breccia from the Idaho zone in the Blackbird mine.All Mesoproterozoic cobaltite mineralization in the district was affected by greenschist- to lower amphibolite-facies (garnet zone) metamorphism during the Late Jurassic to Late Cretaceous Cordilleran orogeny. However, the fine- to coarse-grained massive cobaltite mineralization from the shear zone-hosted Chicago zone, Blackbird mine, is the only studied deposit that has severely disturbed Re

  1. Aspects of fatigue life in thermal barrier coatings

    Energy Technology Data Exchange (ETDEWEB)

    Brodin, H.

    2001-08-01

    Thermal barrier coatings (TBC) are applied on hot components in airborne and land based gas turbines when higher turbine inlet temperature, meaning better thermal efficiency, is desired. The TBC is mainly applied to protect underlying material from high temperatures, but also serves as a protection from the aggressive corrosive environment. Plasma sprayed coatings are often duplex TBC's with an outer ceramic top coat (TC) made from partially stabilised zirconia - ZrO{sub 2} + 6-8% Y{sub 2}O{sub 3}. Below the top coat there is a metallic bond coat (BC). The BC is normally a MCrAlX coating (M=Ni, Co, Fe... and X=Y, Hf, Si ... ). In gas turbine components exposed to elevated temperatures nickel-based superalloys are commonly adopted as load carrying components. In the investigations performed here a commercial wrought Ni-base alloy Haynes 230 has been used as substrate for the TBC. As BC a NiCoCrAlY serves as a reference material and in all cases 7% Yttria PS zirconia has been used. Phase development and failure mechanisms in APS TBC during service-like conditions, have been evaluated in the present study. This is done by combinations of thermal cycling and low cycle fatigue tests. The aim is to achieve better knowledge regarding how, when and why thermal barrier coatings fail. As a final outcome of the project a model capable of predicting fatigue life of a given component will help engineers and designers of land based gas turbines for power generation to better optimise TBC's. In the investigations it is seen that TBC life is strongly influenced by oxidation of the BC and interdiffusion between BC and the substrate. The bond coat is known to oxidise with time at high temperature. The initial oxide found during testing is alumina. With increased time at high temperature Al is depleted from the bond coat due to inter-diffusion and oxidation. Oxides others than alumina start to form when the Al content is reduced below a critical limit. It is here believed

  2. High-foot Implosion Workshop (March 22-24, 2016) Report

    Energy Technology Data Exchange (ETDEWEB)

    Hurricane, O. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-05-06

    From March 22-24, 2016 at Workshop was held at Lawrence Livermore National Laboratory bringing together international experts in inertial confinement fusion research for the purpose of discussing the results from the ‘high-foot implosion campaign.’ The Workshop topics covered a retrospective of the first two years of experiments, a discussion of our best present understanding of what the data and our models imply, a discussion about remaining mysteries that are not understood at this time, and a discussion of our strategy moving forward. The material herein contains information from published and unpublished sources and is distributed solely for the purposes of this Workshop. Key assessments and conclusions resulting from the Workshop are: “The high foot campaign is extremely well documented and the interested reader is urged to go directly to the peer-reviewed journal literature for details.” – D. Haynes (LANL) “Overall progress in understanding of fuel and hot-spot properties near peak burn is excellent.” – V. Goncharov (LLE) “I would say that given the constraints of using the same hohlraum and similar capsule designs to the National Ignition Campaign, the High Foot Campaign achieved as much as could be expected. Indeed the demonstration of significant alpha particle heating remains a landmark achievement.” – J. Chittenden (Imperial College) “One of the principal points of discussion at the meeting was the importance of the roll over in inferred pressure that occurs with reducing coast time for different ablator thicknesses and the idea of repeating shot N140819 to confirm this. I would be very interested to see a return to the High Foot platform as a way to exercise the improved radiographic capabilities such as the curved crystal imaging system and as a way to examine the hypothesis of ‘burn truncation by aneurism.’ ” – J. Chittenden (Imperial College) “It is clear from the quality of the data presented during this workshop

  3. Experimental Design for Evaluation of Co-extruded Refractory Metal/Nickel Base Superalloy Joints

    International Nuclear Information System (INIS)

    ME Petrichek

    2005-01-01

    Prior to the restructuring of the Prometheus Program, the NRPCT was tasked with delivering a nuclear space reactor. Potential NRPCT nuclear space reactor designs for the Prometheus Project required dissimilar materials to be in contact with each other while operating at extreme temperatures under irradiation. As a result of the high reactor core temperatures, refractory metals were the primary candidates for many of the reactor structural and cladding components. They included the tantalum-base alloys ASTAR-811C and Ta-10W, the niobium-base alloy FS-85, and the molybdenum base alloys Moly 41-47.5 Rhenium. The refractory metals were to be joined to candidate nickel base alloys such as Haynes 230, Alloy 617, or Nimonic PE 16 either within the core if the nickel-base alloys were ultimately selected to form the outer core barrel, or at a location exterior to the core if the nickel-base alloys were limited to components exterior to the core. To support the need for dissimilar metal joints in the Prometheus Project, a co-extrusion experiment was proposed. There are several potential methods for the formation of dissimilar metal joints, including explosive bonding, friction stir welding, plasma spray, inertia welding, HIP, and co-extrusion. Most of these joining methods are not viable options because they result in the immediate formation of brittle intermetallics. Upon cooling, intermetallics form in the weld fusion zone between the joined metals. Because brittle intermetallics do not form during the initial bonding process associated with HIP, co-extrusion, and explosive bonding, these three joining procedures are preferred for forming dissimilar metal joints. In reference to a Westinghouse Astronuclear Laboratory report done under a NASA sponsored program, joints that were fabricated between similar materials via explosive bonding had strengths that were directly affected by the width of the diffusion barrier. It was determined that the diffusion zone should not exceed

  4. New Mexico Fiber-Optic Link Marks Giant Leap Toward Future of Radio Astronomy

    Science.gov (United States)

    1998-12-01

    . 15. Nobel Laureate Robert Wilson is in the background. The added antennas are part of a comprehensive plan that the NRAO has developed for upgrading the VLA. The existing array of antennas was authorized by Congress in 1972 and built from 1974 to 1980. The upgrade plan also includes replacing the original electronic and digital equipment from the 1970s with modern technology. Such refurbishment will improve the VLA's scientific capabilities from tenfold to a hundredfold in all research areas, and for a modest investment would provide an enhanced facility many times more powerful than the original VLA. "Though the VLA today is hundreds of times more capable than its original design, some of the technologies of the 1970s that still are in use threaten the instrument with premature obsolescence," said Miller Goss, NRAO's director of VLA/VLBA operations. "Replacing those with today's technology will assure the VLA's continued role as one of the world's premier astronomical research facilities. The success of the Pie Town-VLA link shows one way this can happen." "We are enthusiastic and excited about this development, not only because of the scientific value of the Pie Town link itself, but more importantly because it proves the concept of expanding the VLA," said Robert Dickman, of the NSF's Division of Astronomical Sciences. "The AUI Board of Trustees, in providing 30 percent of the support for the optical fiber link from its corporate reserves, recognizes the scientific importance of making this connection between the VLA and the VLBA," said Martha P. Haynes, AUI's Interim President. Referring to the scientific phenomenon of forming images using the arrays to produce "interferometric fringes," Haynes, a radio astronomer herself, remarked that "We view the provision of corporate matching funds for this project as a 'fringe benefit' for NRAO." Work on the Pie Town-VLA link began in late 1997. Project engineer Ron Beresford, who came from the Australia Telescope National

  5. Late Pleistocene and Holocene paleoseismology of an intraplate seismic zone in a large alluvial valley, the New Madrid seismic zone, Central USA

    Science.gov (United States)

    Guccione, Margaret J.

    2005-10-01

    The New Madrid seismic zone (NMSZ) is an intraplate right-lateral strike-slip and thrust fault system contained mostly within the Mississippi Alluvial Valley. The most recent earthquake sequence in the zone occurred in 1811 1812 and had estimated moment magnitudes of 7 8 (e.g., [Johnston, A.C., 1996. Seismic moment assessment of stable continental earthquakes, Part 3: 1811 1812 New Madrid, 1886 Charleston, and 1755 Lisbon. Geophysical Journal International 126, 314 344; Johnston, A.C., Schweig III, E.S, 1996. The enigma of the New Madrid earthquakes of 1811 1812. Annual Reviews of Earth and Planetary Sciences 24, 339 384; Hough, S.E., Armbruster, J.G., Seeber, L., Hough, J.F., 2000. On the modified Mercalli intensities and magnitudes of the New Madrid earthquakes. Journal of Geophysical Research 105 (B10), 23,839 23,864; Tuttle, M.P., 2001. The use of liquefaction features in paleoseismology: Lessons learned in the New Madrid seismic zone, central United States. Journal of Seismology 5, 361 380]). Four earlier prehistoric earthquakes or earthquake sequences have been dated A.D. 1450 ± 150, 900 ± 100, 300 ± 200, and 2350 B.C. ± 200 years using paleoliquefaction features, particularly those associated with native American artifacts, and in some cases surface deformation ([Craven, J. A. 1995. Paleoseismology study in the New Madrid seismic zone using geological and archeological features to constrain ages of liquefaction deposits. M.S thesis, University of Memphis, Memphis, TN, U.S.A.; Tuttle, M.P., Lafferty III, R.H., Guccione, M.J., Schweig III, E.S., Lopinot, N., Cande, R., Dyer-Williams, K., Haynes, M., 1996. Use of archaeology to date liquefaction features and seismic events in the New Madrid seismic zone, central United States. Geoarchaeology 11, 451 480; Guccione, M.J., Mueller, K., Champion, J., Shepherd, S., Odhiambo, B., 2002b. Stream response to repeated co-seismic folding, Tiptonville dome, western Tennessee. Geomorphology 43(2002), 313 349; Tuttle, M

  6. Preface: Introductory Remarks: Linear Scaling Methods

    Science.gov (United States)

    Bowler, D. R.; Fattebert, J.-L.; Gillan, M. J.; Haynes, P. D.; Skylaris, C.-K.

    2008-07-01

    problems, there was another important theme: extending functionality. The search for greater accuracy has given an implementation of density functional designed to model van der Waals interactions accurately as well as local correlation, TDDFT and QMC and GW methods which, while not explicitly O(N), take advantage of localisation. All speakers at the workshop were invited to contribute to this issue, but not all were able to do this. Hence it is useful to give a complete list of the talks presented, with the names of the sessions; however, many talks fell within more than one area. This is an exciting time for linear scaling methods, which are already starting to contribute significantly to important scientific problems. Applications to nanostructures and biomolecules A DFT study on the structural stability of Ge 3D nanostructures on Si(001) using CONQUEST Tsuyoshi Miyazaki, D R Bowler, M J Gillan, T Otsuka and T Ohno Large scale electronic structure calculation theory and several applications Takeo Fujiwara and Takeo Hoshi ONETEP:Linear-scaling DFT with plane waves Chris-Kriton Skylaris, Peter D Haynes, Arash A Mostofi, Mike C Payne Maximally-localised Wannier functions as building blocks for large-scale electronic structure calculations Arash A Mostofi and Nicola Marzari A linear scaling three dimensional fragment method for ab initio calculations Lin-Wang Wang, Zhengji Zhao, Juan Meza Peta-scalable reactive Molecular dynamics simulation of mechanochemical processes Aiichiro Nakano, Rajiv K. Kalia, Ken-ichi Nomura, Fuyuki Shimojo and Priya Vashishta Recent developments and applications of the real-space multigrid (RMG) method Jerzy Bernholc, M Hodak, W Lu, and F Ribeiro Energy minimisation functionals and algorithms CONQUEST: A linear scaling DFT Code David R Bowler, Tsuyoshi Miyazaki, Antonio Torralba, Veronika Brazdova, Milica Todorovic, Takao Otsuka and Mike Gillan Kernel optimisation and the physical significance of optimised local orbitals in the ONETEP code Peter

  7. Hydrofluoric Acid Corrosion Study of High-Alloy Materials

    International Nuclear Information System (INIS)

    Osborne, P.E.

    2002-01-01

    A corrosion study involving high-alloy materials and concentrated hydrofluoric acid (HF) was conducted in support of the Molten Salt Reactor Experiment Conversion Project (CP). The purpose of the test was to obtain a greater understanding of the corrosion rates of materials of construction currently used in the CP vs those of proposed replacement parts. Results of the study will help formulate a change-out schedule for CP parts. The CP will convert slightly less than 40 kg of 233 U from a gas (UF 6 ) sorbed on sodium fluoride pellets to a more stable oxide (U 3 O 8 ). One by-product of the conversion is the formation of concentrated HF. Six moles of highly corrosive HF are produced for each mole of UF 6 converted. This acid is particularly corrosive to most metals, elastomers, and silica-containing materials. A common impurity found in 233 U is 232 U. This impurity isotope has several daughters that make the handling of the 233 U difficult. Traps of 233 U may have radiation fields of up to 400 R at contact, a situation that makes the process of changing valves or working on the CP more challenging. It is also for this reason that a comprehensive part change-out schedule must be established. Laboratory experiments involving the repeated transfer of HF through 1/2-in. metal tubing and valves have proven difficult due to the corrosivity of the HF upon contact with all wetted parts. Each batch of HF is approximately 1.5 L of 33 wt% HF and is transferred most often as a vapor under vacuum and at temperatures of up to 250 C. Materials used in the HF side of the CP include Hastelloy C-276 and Monel 400 tubing, Haynes 230 and alloy C-276 vessels, and alloy 400 valve bodies with Inconel (alloy 600) bellows. The chemical compositions of the metals discussed in this report are displayed in Table 1. Of particular concern are the almost 30 vendor-supplied UG valves that have the potential for exposure to HF. These valves have been proven to have a finite life due to failure

  8. Book Reviews

    Directory of Open Access Journals (Sweden)

    Redactie KITLV

    1993-01-01

    Full Text Available -Louis Allaire, Samuel M. Wilson, Hispaniola: Caribbean chiefdoms in the age of Columbus. Tuscaloosa: University of Alabama Press, 1990. xi + 170 pp. -Douglas Melvin Haynes, Philip D. Curtin, Death by migration: Europe's encounter with the tropical world in the nineteenth century. Cambridge: Cambridge University Press, 1989. xviii + 251 pp. -Dale Tomich, J.H. Galloway, The sugar cane industry: An historical geography from its origins to 1914. Cambridge: Cambridge University Press, 1989. xii + 266 pp. -Myriam Cottias, Dale Tomich, Slavery in the circuit of sugar: Martinique and the world economy, 1830 -1848. Baltimore: John Hopkins University Press, 1990. xiv + 352 pp. -Robert Forster, Pierre Dessalles, La vie d'un colon à la Martinique au XIXe siècle. Pré-senté par Henri de Frémont. Courbevoie: s.n., 1984-1988, four volumes, 1310 pp. -Hilary Beckles, Douglas V. Armstrong, The old village and the great house: An archaeological and historical examination of Drax Hall Plantation, St Ann's Bay, Jamaica. Chicago: University of Illinois Press, 1990. xiii + 393 pp. -John Stewart, John A. Lent, Caribbean popular culture. Bowling Green OH: Bowling Green State University Popular Press, 1990. 157 pp. -W. Marvin Will, Susanne Jonas ,Democracy in Latin America: Visions and realities. New York: Bergin & Garvey Publishers, 1990. viii + 224 pp., Nancy Stein (eds -Forrest D. Colburn, Kathy McAfee, Storm signals: Structural adjustment and development alternatives in the Caribbean. London: Zed books, 1991. xii + 259 pp. -Derwin S. Munroe, Peggy Antrobus ,In the shadows of the sun: Caribbean development alternatives and U.S. policy. Carmen Diana Deere (coordinator, Peter Phillips, Marcia Rivera & Helen Safa. Boulder CO: Westview Press, 1990. xvii + 246 pp., Lynne Bolles, Edwin Melendez (eds -William Roseberry, Louis A. Pérez, Jr., Lords of the mountain: Social banditry and peasant protest in Cuba, 1878-1918. Pittsburgh: University of Pittsburgh Press, 1989

  9. Point Defect Identification and Management for Sub-300 nm Light Emitting Diodes and Laser Diodes Grown on Bulk AlN Substrates

    Science.gov (United States)

    Bryan, Zachary A.

    The identification and role of point defects in AlN thin films and bulk crystals are studied. High-resolution photoluminescence studies on doped and undoped c-plane and mplane homoepitaxial films reveal several sharp donor-bound exciton (DBX) peaks with a full width at half maximum (FWHM) as narrow as 500 microeV. Power dependent photoluminescence distinguish DBXs tied to the Gamma5 free exciton (FX) from those tied to the Gamma 1 FX. The DBX transitions at 6.012 and 6.006 eV are identified as originating from the neutral-donor-silicon (Si0X) and neutral-donor-oxygen (O0X) respectively. With multiple DBXs and their respective two electron satellite peaks identified, a Haynes Rule plot is developed for the first time for AlN. While high quality AlN homoepitaxy is achievable by metalorganic chemical vapor deposition (MOCVD) growth, current commercially available AlN wafers are typically hindered by the presence of a broad below bandgap optical absorption band centered at 4.7 eV ( 265 nm) with an absorption coefficient of well over 1000 cm-1. Through density functional theory calculations, it is determined that substitutional carbon on the nitrogen site causes this absorption. Further studies reveal a donor-acceptor pair (DAP) recombination between substitutional carbon on the nitrogen site and a nitrogen vacancy with an emission energy of 2.8 eV. Lastly, co-doping bulk AlN with Si or O is explored and found to suppress the unwanted 4.7 eV absorption band. A novel Fermi level control scheme for point defect management during MOCVD growth in III-nitride materials by above bandgap illumination is proposed and implemented for Mg-doped GaN and Si-doped AlGaN materials as a proof of concept. The point defect control scheme uses photo-generated minority charge carriers to control the electro-chemical potential of the system and increase the formation energies of electrically charged compensating point defects. The result is a lower incorporation of compensating point

  10. Development of a Thin Film Primary Surface Heat Exchanger for Advanced Power Cycles

    Energy Technology Data Exchange (ETDEWEB)

    Allison, Tim [Southwest Research Inst., San Antonio, TX (United States); Beck, Griffin [Southwest Research Inst., San Antonio, TX (United States); Bennett, Jeffrey [Southwest Research Inst., San Antonio, TX (United States); Hoopes, Kevin [Southwest Research Inst., San Antonio, TX (United States); Miller, Larry [Southwest Research Inst., San Antonio, TX (United States)

    2016-06-29

    initial down-selection were completed in order to identify promising redesign options for further analysis. Detailed analysis of all promising redesign options was performed via finite element and computational fluid dynamic simulations in order to characterize mechanical and thermal-fluid performance of each option. These options included material change, various sheet thickness configurations, pitch and phasing of cross-flow and counter-flow sheets, and separator sheets. The analysis results have identified two viable redesign options that maintain existing safety margins optimally through a material change to Haynes 282 and (A) sheet thickness increases of 40% on the counter-flow sheet and 75% on the hot side cross-flow corrugation sheet or (B) addition of a separator sheet in the counter-flow section while maintaining the original counter-flow sheet thickness and increasing the cross-flow corrugation sheet thickness by 90% to account for the increase in cell height. While both options satisfy mechanical stress constraints, the separator sheet design has a higher part count, slightly reduced heat transfer, and slightly higher pressure drop than the first option and is not preferred. Finally, several test loop concepts have been developed for different full-scale and reduced-scale recuperator testing options. For each option, various loop components, such as heat exchangers, valves, heaters, and compressors, were evaluated in an effort to maximize utilization of existing resources. All concepts utilize an existing 3-MW CO2 compressor, heater, and loop coolers, but the concepts vary by incorporating different amounts of new equipment for achieving various flow rates (all concepts operate at design pressure and temperature). The third concept achieves a 1 kg/s test without purchasing any costly equipment (coolers, heaters, blowers, etc.). Since the stacked cell design of the recuperator results in the same flow conditions at each core cell (even for a reduced

  11. Medicina basada en la evidencia.

    Directory of Open Access Journals (Sweden)

    José Félix Patiño Restrepo

    1999-08-01

    controlados como fundamento para una atención de la salud de alta calidad (Bero & Rennie 1995; Chalmers & Haynes 1994; Godlee 1994; Huston 1996; Jadad 1998. En octubre de 1992 se abrió en la Universidad de Oxford el Cochrane Centre, con el patrocinio del Nuffield Provincial Hospitals Trust y del Swedish Council on Technology Assessment in Health Care. La Cochrane Library ofrece los servicios que desarrolla la Cochrane Collaboration a través de los grupos internacionales que hacen las revisiones periódicas. Hoy constituye la más formidable y valiosa base de datos de medicina basada en la evidencia y se encuentra fácilmente disponible en CD-ROM y en Internet (www.cochranelibrary.net/cccoab.htm...

  12. PREFACE: Introductory remarks Introductory remarks

    Science.gov (United States)

    Bowler, D. R.; Alfe, D.

    2010-02-01

    of matter under extreme conditions, as in the Earth's core. A further powerful development has been his input to linear-scaling quantum techniques for the properties of very large complex systems. In recent years, his attention has shifted towards increasing accuracy, touching areas such as quantum Monte Carlo and hierarchical quantum chemical techniques. In this journal issue, we have papers which both reflect topics from the workshop and address a number of areas which are directly in Mike's interests or which have been influenced by his work or assistance. There are papers addressing accuracy in quantum simulations [1-5], methods for applying quantum techniques to large systems [6, 7] and applications of quantum simulations to important problems [8-10]. We also have a viewpoint on magnetism in oxides and carbon [11], prompted by Mike's innovative work on oxides. References [1] Nolan S J, Bygrave P J, Allan N L and Manby F R 2010 J. Phys.: Condens. Matter 22 074201 [2] Badinski A, Haynes P D, Trail J R and Needs R J 2010 J. Phys.: Condens. Matter 22 074202 [3] Klimeš J, Bowler D R and Michaelides A 2010 J. Phys.: Condens. Matter 22 074203 [4] Baroni S, Gebauer R, Malcιoğlu O B, Saad Y, Umari P and Xian J 2010 J. Phys.: Condens. Matter 22 074204 [5] Toton D, Lorenz C D, Rompotis N, Martsinovich N and Kantorovich L 2010 J. Phys.: Condens. Matter 22 074205 [6] Fujiwara T, Hoshi T, Yamamoto S, Sogabe T and Zhang S-L 2010 J. Phys.: Condens. Matter 22 074206 [7] Bowler D R and Miyazari T 2010 J. Phys.: Condens. Matter 22 074207 [8] Er S, van Setten M J, de Wijs G A and Brocks G 2010 J. Phys.: Condens. Matter 22 074208 [9] Pan D, Liu L-M, Tribello G A, Slater B, Michaelides A and Wang E 2010 J. Phys.: Condens. Matter 22 074209 [10] Choudhury R, Gattinoni C, Makov G and De Vita A 2010 J. Phys.: Condens. Matter 22 074210 [11] Stoneham M 2010 J. Phys.: Condens. Matter 22 074211

  13. Hydrofluoric Acid Corrosion Study of High-Alloy Materials

    Energy Technology Data Exchange (ETDEWEB)

    Osborne, P.E.

    2002-09-11

    A corrosion study involving high-alloy materials and concentrated hydrofluoric acid (HF) was conducted in support of the Molten Salt Reactor Experiment Conversion Project (CP). The purpose of the test was to obtain a greater understanding of the corrosion rates of materials of construction currently used in the CP vs those of proposed replacement parts. Results of the study will help formulate a change-out schedule for CP parts. The CP will convert slightly less than 40 kg of {sup 233}U from a gas (UF{sub 6}) sorbed on sodium fluoride pellets to a more stable oxide (U{sub 3}O{sub 8}). One by-product of the conversion is the formation of concentrated HF. Six moles of highly corrosive HF are produced for each mole of UF{sub 6} converted. This acid is particularly corrosive to most metals, elastomers, and silica-containing materials. A common impurity found in {sup 233}U is {sup 232}U. This impurity isotope has several daughters that make the handling of the {sup 233}U difficult. Traps of {sup 233}U may have radiation fields of up to 400 R at contact, a situation that makes the process of changing valves or working on the CP more challenging. It is also for this reason that a comprehensive part change-out schedule must be established. Laboratory experiments involving the repeated transfer of HF through 1/2-in. metal tubing and valves have proven difficult due to the corrosivity of the HF upon contact with all wetted parts. Each batch of HF is approximately 1.5 L of 33 wt% HF and is transferred most often as a vapor under vacuum and at temperatures of up to 250 C. Materials used in the HF side of the CP include Hastelloy C-276 and Monel 400 tubing, Haynes 230 and alloy C-276 vessels, and alloy 400 valve bodies with Inconel (alloy 600) bellows. The chemical compositions of the metals discussed in this report are displayed in Table 1. Of particular concern are the almost 30 vendor-supplied UG valves that have the potential for exposure to HF. These valves have been

  14. Liquid Salts as Media for Process Heat Transfer from VHTR's: Forced Convective Channel Flow Thermal Hydraulics, Materials, and Coating

    Energy Technology Data Exchange (ETDEWEB)

    Sridharan, Kumar; Anderson, Mark; Allen, Todd; Corradini, Michael

    2012-01-30

    The goal of this NERI project was to perform research on high temperature fluoride and chloride molten salts towards the long-term goal of using these salts for transferring process heat from high temperature nuclear reactor to operation of hydrogen production and chemical plants. Specifically, the research focuses on corrosion of materials in molten salts, which continues to be one of the most significant challenges in molten salts systems. Based on the earlier work performed at ORNL on salt properties for heat transfer applications, a eutectic fluoride salt FLiNaK (46.5% LiF-11.5%NaF-42.0%KF, mol.%) and a eutectic chloride salt (32%MgCl2-68%KCl, mole %) were selected for this study. Several high temperature candidate Fe-Ni-Cr and Ni-Cr alloys: Hastelloy-N, Hastelloy-X, Haynes-230, Inconel-617, and Incoloy-800H, were exposed to molten FLiNaK with the goal of understanding corrosion mechanisms and ranking these alloys for their suitability for molten fluoride salt heat exchanger and thermal storage applications. The tests were performed at 850C for 500 h in sealed graphite crucibles under an argon cover gas. Corrosion was noted to occur predominantly from dealloying of Cr from the alloys, an effect that was particularly pronounced at the grain boundaries Alloy weight-loss due to molten fluoride salt exposure correlated with the initial Cr-content of the alloys, and was consistent with the Cr-content measured in the salts after corrosion tests. The alloys weight-loss was also found to correlate to the concentration of carbon present for the nominally 20% Cr containing alloys, due to the formation of chromium carbide phases at the grain boundaries. Experiments involving molten salt exposures of Incoloy-800H in Incoloy-800H crucibles under an argon cover gas showed a significantly lower corrosion for this alloy than when tested in a graphite crucible. Graphite significantly accelerated alloy corrosion due to the reduction of Cr from solution by graphite and formation

  15. Understanding the role of contextual cues in supporting the formation of medication-taking habits

    Directory of Open Access Journals (Sweden)

    Katarzyna Stawarz

    2015-10-01

    Full Text Available Background: Maintaining high adherence is crucial to ensure that medications are effective (WHO, 2003. However, adherence rates are low (e.g. Haynes et al., 2002; Kardas, 2002; Osterberg & Blaschke, 2005. While some patients make a deliberate decision to alter or discontinue their treatment, others can be non-adherent unintentionally (WHO, 2003. Forgetfulness in particular is the main reason of unintentional non-adherence (Unni & Farris, 2011, and several technologies have been designed to support patients’ memory. At present, patients have access to a wide range of commercial adherence technologies, from simple smartphone apps to complex medication management systems. The topic is also popular among academic researchers, with many working on novel approaches to supporting patients’ memory (e.g. de Oliveira et al., 2010; Lee & Dey, 2014; Rodríguez et al., 2011. However, existing adherence technologies tend to provide timed alerts ("Please take your pill" and largely neglect people’s actual behaviour and the context within which they remember their medications. Contextual cues, e.g. routine events or meaningful objects, play an important role in supporting medication adherence, as they aid both prospective memory and habit formation; as a result, medication-taking becomes a part of a daily routine. Tasks linked to routine events, e.g. taking pills with breakfast, are easier to remember than tasks that need to take place at a specific time, such as taking pills at 7am (Park & Kidder, 1996. Moreover, research conducted with older adults shows that medication management is often guided by the physical environment and temporal rhythms of the day (Palen & Aaløkke, 2006, and that it is possible to improve adherence rates through tailoring remembering strategies and leaving visible cues in routinely visited places (Insel & Cole, 2005. Such contextual cues can also support the process of habit formation: as the behaviour is consistently repeated

  16. Neurotropismo viral, el caso del virus de rabia

    Directory of Open Access Journals (Sweden)

    Jaime E. Castellanos

    2004-03-01

    -family: Arial">REFERENCIAS

    1. HAYWOOD A. Virus receptor: Binding, adhesion, strengthening and changes in viral structure. J Virol 1994; 68: 1-5.

    2. CASTELLANOS JE, HURTADO H. Viral infection studied in adult sensory neurons. En L. Haynes (Ed.. The Neuron in Tissue Culture. Chichester: Jonh Wiley & Sons Ltd.; 1999. pag. 289-93.

    3. CASTELLANOS JE, CASTAÑEDA D, VELANDIA A, HURTADO H. Partial Inhibition of the in vitro infection of adult mouse dorsal root ganglion neurons by rabies virus using nicotinic antagonists. Neurosci Lett 1997; 216: 198-200.

    4. CASTAÑEDA-CASTELLANOS D, CASTELLANOS JE, HURTADO H. Differential use of the nicotinic receptor by rabies virus based upon substrate origin. J Neurovirol 2002; 8: 121-126

    5. CASTELLANOS JE, BENITO MA, RAMÍREZ R. Receptores nicotínicos neuronales. Rev Fac Med U Nacional 2001; 49: 155-161

    6. THOULOUZE MI, LAFAGE M, SCHACHNER M, HARTMANN U, CREMER H, LAFON M. The Neural Cell Adhesion Molecule is a receptor for rabies virus. J Virol 1998; 72: 7181-7190.

    7. CASTELLANOS JE, HURTADO H. Receptores para el virus de rabia. Biomédica 2001; 21: 365-371

    8. MARTÍNEZ-GUTIERREZ M, APONTE S, RECIO-PINTO E. CASTELLANOS JE. PREFACE: Nanosafe2010: International Conference on Safe Production and Use of Nanomaterials

    Science.gov (United States)

    Sentein, Carole; Schuster, Frédéric; Tardif, François

    2011-07-01

    -Tech Innovation Ltd, GB DASKALOS MCERTH/CPERI, GR DE BERARDIS BIstituto Superiore di Sanità, IT DE MIGUEL YTECNALIA, ES DELAHAYE AAd Air Solutions, FR DEMIDOVA TSevertsov Inst. of Ecology and Evolution, RU DENOO KSolae, GR DERROUGH SCEA, FR DOBRZYNSKA E BCentral Institute for Labour Protection, PL DOLEZ PÉcole de technologie supérieure, CA DOUKI TCEA, FR DRAIS EINRS, FR DUFOUR J-PCILAS, FR DURAN NUNICAMP, BR DURAND CCEA, FR DUTOUQUET CINERIS, FR DUVAL-ARNOULD GSaint-Gobain, FR ECKHOFF R KUniv. Bergen, NO ELLENBECKER M JUniv. Massachusetts Lowell, US EMOND CUniv. Montreal, CA ENGEL SBASF, DE ESTRELA-LOPIS ILeipzig Univ., DE FABBRI MJRC, IT FACCINI MLeitat technological center, ES FESSARD VAnses, FR FILIMUNDI ETSI, DE FIRSTOVA VSRCAMB, RU FLEURY DINERIS, FR FRABOULET DCEA, FR FRESNAY CThales Research & Technology, FR GABORIEAU ACEA, FR GAFFET ENanoMaterials Research Group, FR GALLET SCefic, BE GEIGER DBASF, DE GENSDARMES FIRSN, FR GERRITSEN-EBBEN RTNO Quality of Life, NL GKANIS VDemokritos, GR GLUSHKOVA ARIHOPHE, RU GONZALEZ-FERNANDEZ AUniv. Vigo, ES GOOSSENS HPhilips Research Aerasense, NL GRAHNSTEDT SOslo Univ., NO GREENHILL-HOOPER MRio Tinto Minerals, FR GROSSEAU PEcole des Mines de Saint Etienne, FR GUADAGNINI RUniv. Paris 7 Diderot, FR GUIOT ACEA, FR GUIZARD BCEA, FR HAASE AFederal Institute for Risk Assessment, DE HANINI AUniv. Paris 7 Diderot, FR HAYNES LUniv. de los Andes, VE HEJAZI MUniv. Tehran, IR HENRY FINERIS, FR HERRERA HInstitute for Work and Health, CH HOET PKU Leuven, BE HOLE PNanosight, GB HULME JUniv. Cambridge, GB JI XINERIS, FR JOUHANNAUD JCEA, FR JOUZEL J-NCenter for the Sociology of Organizations, FR JURKSCHAT KOxford Univ., GB KAISER J-PEmpa, CH KANAYA FNat. Center for Global Health and Medicine, JP KATALAGARIANAKIS GEuropean Commission, BE KECK LGrimm Aerosol Technik, DE KELLER MFraunhofer Institute, DE KHLEBNIKOVA NRIHOPHE, RU KHODABANDEH MUniv. Tehran, IR KHOLODENKO VSRCAMB, RU KOBAYASHI NAIST, JP KOPONEN INRCWE, DK KOWAL SINERIS, FR KRYSANOV

  17. Selected Abstracts of the 2nd Congress of joint European Neonatal Societies (jENS 2017; Venice (Italy; October 31-November 4, 2017; Session "Neonatal Pulmonology, Neonatal Respiratory Support, Resuscitation"

    Directory of Open Access Journals (Sweden)

    --- Various Authors

    2017-10-01

    FOR THE MANAGEMENT OF RDS BY USING INSURE APPROACH IN PRETERM INFANTS • S.A. Ozdemir, E.Y. Ergon, R. Çolak, M. Yıldız, F. Kulalı, K. Çelik, Ö. Olukman, Ş. ÇalkavurABS 49. PERINATAL FACTORS ASSOCIATED TO THE FAILURE OF EARLY NASAL CONTINUOUS POSITIVE PRESSURE IN VERY LOW BIRTH WEIGHT INFANTS • T.S. Souza, A.A.Vieira, C. Morcelli-TovarABS 50. VENTFIRST: A MULTICENTER RCT OF AS­SISTED VENTILATION DURING DELAYED CORD CLAMPING FOR EXTREMELY PRETERM INFANTS • K. Fairchild, S. Niermeyer, J. Winter, C. Chisholm, J. Kattwinkel, on behalf of the Vent First Steering Committee (J. Fang, C. Colby – Mayo Clinic; J. Barry – University of Colorado; M. Al-Hosni, M. Strand – St. Louis University; T. Gorman, L. vanMarter – Brigham and Women’s Hospital; R. Schelonka, J. Warren – Oregon Health Sciences University; S. Thomas – University of Calgary; G. Schmolzer – University of Alberta; A. Camblos, S. Fowler, M. Haynes, G. Petroni, M. Thielen – University of VirginiaABS 51. IS THE DOUBLE LUNG POINT AN ACCU­RATE DIAGNOSTIC MARKER FOR TRANSIENT TACHYPNEA OF THE NEONATE? A PRO­SPECTIVE, INTERNATIONAL STUDY • F. Migliaro, N. Yousef, J. Rodriguez Fanjul, D. De Luca, I. Corsini, C. Dani, V. Di Guardo, M. Giampietri, L. Capasso, A. Sodano, F. RaimondiABS 52. BEDSIDE LUNG ULTRASONOGRAPHY FOR THE DIAGNOSIS OF NEONATAL RESPIRATORY DISTRESS IN THE FIRST 24 HOURS OF LIFE • I. Corsini, N. Parri, E. Gozzini, C. Coviello, V. Leonardi, C. Poggi, M. Giacalone, T. Bianconi, L. Tofani, C. DaniABS 53. IMPACT OF THE USE OF HIGH POSITIVE END EXPIRATORY PRESSURE ON EXTUBATION OF PREMATURE INFANTS WITH SEVERE BRONCHOPULMONARY DYSPLASIA • W.A. Gonçalves-Ferri, F. Pereira Martins-Celini, C. Danieli Troiano, D.C. AragonABS 54. THE USE OF DEXAMETHASONE IN PRETERM INFANTS FOR LUNG DISEASE IN A TERTIARY NICU • K.M. Sun, H. GowdaABS 55. CONSULTANT PRESENCE AT DELIVERY: A RETROSPECTIVE AUDIT OF DEMOGRAPHICS AND OUTCOMES IN A TERTIARY UK CENTRE • L. Mahoney, T. Hunt, H. Rabe