Coordinate transformations make perfect invisibility cloaks with arbitrary shape

International Nuclear Information System (INIS)

Yan Wei; Yan Min; Ruan Zhichao; Qiu Min

2008-01-01

By investigating wave properties at cloak boundaries, invisibility cloaks with arbitrary shape constructed by general coordinate transformations are confirmed to be perfectly invisible to the external incident wave. The differences between line transformed cloaks and point transformed cloaks are discussed. The fields in the cloak medium are found analytically to be related to the fields in the original space via coordinate transformation functions. At the exterior boundary of the cloak, it is shown that no reflection is excited even though the permittivity and permeability do not always have a perfectly matched layer form, whereas at the inner boundary, no reflection is excited either, and in particular no field can penetrate into the cloaked region. However, for the inner boundary of any line transformed cloak, the permittivity and permeability in a specific tangential direction are always required to be infinitely large. Furthermore, the field discontinuity at the inner boundary always exists; the surface current is induced to make this discontinuity self-consistent. A point transformed cloak does not experience such problems. The tangential fields at the inner boundary are all zero, implying that no field discontinuity exists

Generalized transformations and coordinates for static spherically symmetric general relativity

Science.gov (United States)

Hill, James M.; O'Leary, Joseph

2018-04-01

We examine a static, spherically symmetric solution of the empty space field equations of general relativity with a non-orthogonal line element which gives rise to an opportunity that does not occur in the standard derivations of the Schwarzschild solution. In these derivations, convenient coordinate transformations and dynamical assumptions inevitably lead to the Schwarzschild solution. By relaxing these conditions, a new solution possibility arises and the resulting formalism embraces the Schwarzschild solution as a special case. The new solution avoids the coordinate singularity associated with the Schwarzschild solution and is achieved by obtaining a more suitable coordinate chart. The solution embodies two arbitrary constants, one of which can be identified as the Newtonian gravitational potential using the weak field limit. The additional arbitrary constant gives rise to a situation that allows for generalizations of the Eddington-Finkelstein transformation and the Kruskal-Szekeres coordinates.

Generalized transformations and coordinates for static spherically symmetric general relativity.

Science.gov (United States)

Hill, James M; O'Leary, Joseph

2018-04-01

We examine a static, spherically symmetric solution of the empty space field equations of general relativity with a non-orthogonal line element which gives rise to an opportunity that does not occur in the standard derivations of the Schwarzschild solution. In these derivations, convenient coordinate transformations and dynamical assumptions inevitably lead to the Schwarzschild solution. By relaxing these conditions, a new solution possibility arises and the resulting formalism embraces the Schwarzschild solution as a special case. The new solution avoids the coordinate singularity associated with the Schwarzschild solution and is achieved by obtaining a more suitable coordinate chart. The solution embodies two arbitrary constants, one of which can be identified as the Newtonian gravitational potential using the weak field limit. The additional arbitrary constant gives rise to a situation that allows for generalizations of the Eddington-Finkelstein transformation and the Kruskal-Szekeres coordinates.

Dispersion calculation method based on S-transform and coordinate rotation for Love channel waves with two components

Science.gov (United States)

Feng, Lei; Zhang, Yugui

2017-08-01

Dispersion analysis is an important part of in-seam seismic data processing, and the calculation accuracy of the dispersion curve directly influences pickup errors of channel wave travel time. To extract an accurate channel wave dispersion curve from in-seam seismic two-component signals, we proposed a time-frequency analysis method based on single-trace signal processing; in addition, we formulated a dispersion calculation equation, based on S-transform, with a freely adjusted filter window width. To unify the azimuth of seismic wave propagation received by a two-component geophone, the original in-seam seismic data undergoes coordinate rotation. The rotation angle can be calculated based on P-wave characteristics, with high energy in the wave propagation direction and weak energy in the vertical direction. With this angle acquisition, a two-component signal can be converted to horizontal and vertical directions. Because Love channel waves have a particle vibration track perpendicular to the wave propagation direction, the signal in the horizontal and vertical directions is mainly Love channel waves. More accurate dispersion characters of Love channel waves can be extracted after the coordinate rotation of two-component signals.

Squeezing of open boundaries by Maxwell-consistent real coordinate transformation

DEFF Research Database (Denmark)

Shyroki, Dzmitry

2006-01-01

To emulate open boundaries within a finite computational domain, real-function coordinate transformation consistent with generally covariant Maxwell equations is proposed. The mapping-realized with arctangent function here-has a transparent geometric meaning of pure squeezing of coordinates, does...... not introduce artificially lossy layers (or "lossy coordinates") to absorb outgoing radiation, nor lead to spurious non-Maxwellian fields. In finite-difference frequency-domain calculations on staggered grid, clear superiority over perfectly matched layers is demonstrated by the proposed technique, at a lower...

Hawking radiation temperatures in non-stationary Kerr black holes with different tortoise coordinate transformations

Energy Technology Data Exchange (ETDEWEB)

Lan, X.G. [Southwest Jiaotong University, Quantum Optoelectronics Laboratory, Chengdu (China); China West Normal University, Institute of Theoretical Physics, Nanchong (China); Jiang, Q.Q. [China West Normal University, Institute of Theoretical Physics, Nanchong (China); Wei, L.F. [Southwest Jiaotong University, Quantum Optoelectronics Laboratory, Chengdu (China); Sun Yat-Sen University, State Key Laboratory of Optoelectronic Materials and Technologies, School of Physics and Engineering, Guangzhou (China)

2012-04-15

We apply the Damour-Ruffini-Sannan method to study the Hawking radiations of scalar and Dirac particles in non-stationary Kerr black holes under different tortoise coordinate transformations. We found that all the relevant Hawking radiation spectra show still the blackbody ones, while the Hawking temperatures are strongly related to the used tortoise coordinate transformations. The properties of these dependences are discussed analytically and numerically. Our results imply that proper selections of tortoise coordinate transformations should be important in the studies of Hawking radiations and the correct selection would be given by the experimental observations in the future. (orig.)

Coordinate transformations, orthographic projections, and robot kinematics

International Nuclear Information System (INIS)

Crochetiere, W.J.

1984-01-01

Humans do not consciously think of moving each of their joints while they move their hands from one place to another. Likewise, robot arms can be commanded to move about in cartesian space without the need to address the individual joints. To do this, the direct and inverse kinematic equations of any robot arm must be derived. The direct kinematic equations uniquely transform the joint positions into the position (and orientation) of the hand, whereas the inverse kinematic equations transform the position (and orientation) of the hand into joint positions. The derivation of the inverse kinematic equations for any particular robot is a difficult problem which may have more than one solution. In this paper, these equations are derived for a six degree of freedom robot arm. A combination of matrix operations to perform coordinate rotations, and trigonometry within the appropriate orthographic projects to perform coordinate translations is employed. This complementary approach yields a solution which is more easily obtained, and also more easily visualized. The resulting solution was programmed into a real-time computer as a part of a higher level software system to control the motion of the arm

COORDINATE TRANSFORMATION USING FEATHERSTONE AND VANÍČEK PROPOSED APPROACH - A CASE STUDY OF GHANA GEODETIC REFERENCE NETWORK

Directory of Open Access Journals (Sweden)

Yao Yevenyo Ziggah

2017-03-01

Full Text Available Most developing countries like Ghana are yet to adopt the geocentric datum for its surveying and mapping purposes. It is well known and documented that non-geocentric datums based on its establishment have more distortions in height compared with satellite datums. Most authors have argued that combining such height with horizontal positions (latitude and longitude in the transformation process could introduce unwanted distortions to the network. This is because the local geodetic height in most cases is assumed to be determined to a lower accuracy compared with the horizontal positions. In the light of this, a transformation model was proposed by Featherstone and Vaníček (1999 which avoids the use of height in both global and local datums in coordinate transformation. It was confirmed that adopting such a method reduces the effect of distortions caused by geodetic height on the transformation parameters estimated. Therefore, this paper applied Featherstone and Vaníček (FV model for the first time to a set of common points coordinates in Ghana geodetic reference network. The FV model was used to transform coordinates from global datum (WGS84 to local datum (Accra datum. The results obtained based on the Root Mean Square Error (RMSE and Mean Absolute Error (MAE in both Eastings and Northings were satisfactory. Thus, a RMSE value of 0.66 m and 0.96 m were obtained for the Eastings and Northings while 0.76 m and 0.73 m were the MAE values achieved. Also, the FV model attained a transformation accuracy of 0.49 m. Hence, this study will serve as a preliminary investigation in avoiding the use of height in coordinate transformation within Ghana’s geodetic reference network.

Design of the Coordinate Transformation Function for Cylindrical Acoustic Cloaks with a Quantity of Discrete Layers

International Nuclear Information System (INIS)

Cai Li; Wen Ji-Hong; Yu Dian-Long; Lu Zhi-Miao; Wen Xi-Sen

2014-01-01

Acoustic cloak based on coordinate transformation is of great topical interest and has promise in potential applications such as sound transparency and insulation. The frequency response of acoustic cloaks with a quantity of discrete homogeneous layers is analyzed by the acoustic scattering theory. The effect of coordinate transformation function on the acoustic total scattering cross section is discussed to achieve low scattering with only a few layers of anisotropic metamaterials. Also, the physics of acoustic wave interaction with the interfaces between the discrete layers inside the cloak shell is discussed. These results provide a better way of designing a multilayered acoustic cloak with fewer layers. (fundamental areas of phenomenology(including applications))

Design of the Coordinate Transformation Function for Cylindrical Acoustic Cloaks with a Quantity of Discrete Layers

Science.gov (United States)

Cai, Li; Wen, Ji-Hong; Yu, Dian-Long; Lu, Zhi-Miao; Wen, Xi-Sen

2014-09-01

Acoustic cloak based on coordinate transformation is of great topical interest and has promise in potential applications such as sound transparency and insulation. The frequency response of acoustic cloaks with a quantity of discrete homogeneous layers is analyzed by the acoustic scattering theory. The effect of coordinate transformation function on the acoustic total scattering cross section is discussed to achieve low scattering with only a few layers of anisotropic metamaterials. Also, the physics of acoustic wave interaction with the interfaces between the discrete layers inside the cloak shell is discussed. These results provide a better way of designing a multilayered acoustic cloak with fewer layers.

Application for coordinate transformation between Gaus - Kruger projection: Bessel ellipsoid and UTM projection: WGS84 ellipsoid

Directory of Open Access Journals (Sweden)

Zoran Gojković

2017-01-01

Full Text Available The physical surface of the earth has irregular shape which is not mathematically defined, therefore the shape of the Earth is approximated with mathematically defined surfaces such as ellipsoid and sphere. The developing of a global positioning systems, thus and modern navigation systems, as effect produce large amounts of data which contain the problem of homogeneity. This problem could be exceed if all the data are store in the same coordinate system. Hence the need for data transformation from local coordinate systems to the global coordinate systems. Global level implies WGS84 ellipsoid and UTM projection while national coordinate system of Republic Serbia is Gauss-Kruger with Bessel ellipsoid. This coordinate system of Republic Serbia on a global level has a local character. Applying appropriate mathematical models and functions it is possible to transform coordinates from one system to another and vice versa. The paper describes coordinate transformations from Gauss-Kruger coordinate system ellipsoid Bessel to UTM projection WGS84 ellipsoid and vice versa, and also an application which provides transformation of its kind that is made using open source environment. Name of the application is TRANS7_GK_UTM_GK and it can be found and used on the web page of the faculty for Mining and Geology under the link http://gk2utm.rgf.bg.ac.rs with a user guide.

Direction-sensitive smart monitoring of structures using heterogeneous smartphone sensor data and coordinate system transformation

Science.gov (United States)

Ozer, Ekin; Feng, Maria Q.

2017-04-01

Mobile, heterogeneous, and smart sensor networks produce pervasive structural health monitoring (SHM) information. With various embedded sensors, smartphones have emerged to innovate SHM by empowering citizens to serve as sensors. By default, smartphones meet the fundamental smart sensor criteria, thanks to the built-in processor, memory, wireless communication units and mobile operating system. SHM using smartphones, however, faces technical challenges due to citizen-induced uncertainties, undesired sensor-structure integration, and lack of control over the sensing platform. Previously, the authors presented successful applications of smartphone accelerometers for structural vibration measurement and proposed a monitoring framework under citizen-induced spatiotemporal uncertainties. This study aims at extending the capabilities of smartphone-based SHM with a special focus on the lack of control over the sensor (i.e., the phone) positioning by citizens resulting in unknown sensor orientations. Using smartphone gyroscope, accelerometer, and magnetometer; instantaneous sensor orientation can be obtained with respect to gravitational and magnetic north directions. Using these sensor data, mobile operating system frameworks return processed features such as attitude and heading that can be used to correct misaligned sensor signals. For this purpose, a coordinate transformation procedure is proposed and illustrated on a two-story laboratory structural model and real-scale bridges with various sensor positioning examples. The proposed method corrects the sensor signals by tracking their orientations and improves measurement accuracy. Moreover, knowing structure’s coordinate system a priori, even the data from arbitrarily positioned sensors can automatically be transformed to the structural coordinates. In addition, this paper also touches some secondary mobile and heterogeneous data issues including imperfect sampling and geolocation services. The coordinate system

Faithful transformation of quasi-isotropic to Weyl-Papapetrou coordinates: a prerequisite to compare metrics

International Nuclear Information System (INIS)

Pappas, G; Apostolatos, T A

2008-01-01

We demonstrate how one should transform correctly quasi-isotropic coordinates to Weyl-Papapetrou coordinates in order to compare the metric around a rotating star, which has been constructed numerically in the former coordinates, with an axially symmetric stationary metric, which is given through an analytical form in the latter coordinates. (comments, replies and notes)

Faithful transformation of quasi-isotropic to Weyl-Papapetrou coordinates: a prerequisite to compare metrics

Energy Technology Data Exchange (ETDEWEB)

Pappas, G; Apostolatos, T A [Section of Astrophysics, Astronomy and Mechanics, Department of Physics, University of Athens, Panepistimiopolis Zografos GR15783, Athens (Greece)

2008-11-21

We demonstrate how one should transform correctly quasi-isotropic coordinates to Weyl-Papapetrou coordinates in order to compare the metric around a rotating star, which has been constructed numerically in the former coordinates, with an axially symmetric stationary metric, which is given through an analytical form in the latter coordinates. (comments, replies and notes)

RESEARCH ON COORDINATE TRANSFORMATION METHOD OF GB-SAR IMAGE SUPPORTED BY 3D LASER SCANNING TECHNOLOGY

Directory of Open Access Journals (Sweden)

P. Wang

2018-04-01

Full Text Available In the image plane of GB-SAR, identification of deformation distribution is usually carried out by artificial interpretation. This method requires analysts to have adequate experience of radar imaging and target recognition, otherwise it can easily cause false recognition of deformation target or region. Therefore, it is very meaningful to connect two-dimensional (2D plane coordinate system with the common three-dimensional (3D terrain coordinate system. To improve the global accuracy and reliability of the transformation from 2D coordinates of GB-SAR images to local 3D coordinates, and overcome the limitation of traditional similarity transformation parameter estimation method, 3D laser scanning data is used to assist the transformation of GB-SAR image coordinates. A straight line fitting method for calculating horizontal angle was proposed in this paper. After projection into a consistent imaging plane, we can calculate horizontal rotation angle by using the linear characteristics of the structure in radar image and the 3D coordinate system. Aided by external elevation information by 3D laser scanning technology, we completed the matching of point clouds and pixels on the projection plane according to the geometric projection principle of GB-SAR imaging realizing the transformation calculation of GB-SAR image coordinates to local 3D coordinates. Finally, the effectiveness of the method is verified by the GB-SAR deformation monitoring experiment on the high slope of Geheyan dam.

Research on Coordinate Transformation Method of Gb-Sar Image Supported by 3d Laser Scanning Technology

Science.gov (United States)

Wang, P.; Xing, C.

2018-04-01

In the image plane of GB-SAR, identification of deformation distribution is usually carried out by artificial interpretation. This method requires analysts to have adequate experience of radar imaging and target recognition, otherwise it can easily cause false recognition of deformation target or region. Therefore, it is very meaningful to connect two-dimensional (2D) plane coordinate system with the common three-dimensional (3D) terrain coordinate system. To improve the global accuracy and reliability of the transformation from 2D coordinates of GB-SAR images to local 3D coordinates, and overcome the limitation of traditional similarity transformation parameter estimation method, 3D laser scanning data is used to assist the transformation of GB-SAR image coordinates. A straight line fitting method for calculating horizontal angle was proposed in this paper. After projection into a consistent imaging plane, we can calculate horizontal rotation angle by using the linear characteristics of the structure in radar image and the 3D coordinate system. Aided by external elevation information by 3D laser scanning technology, we completed the matching of point clouds and pixels on the projection plane according to the geometric projection principle of GB-SAR imaging realizing the transformation calculation of GB-SAR image coordinates to local 3D coordinates. Finally, the effectiveness of the method is verified by the GB-SAR deformation monitoring experiment on the high slope of Geheyan dam.

Designing the coordinate transformation function for non-magnetic invisibility cloaking

International Nuclear Information System (INIS)

Xu Xiaofei; Feng Yijun; Zhao Lin; Jiang Tian; Lu Chunhua; Xu Zhongzi

2008-01-01

An optical invisibility cloak based on a transformation approach has recently been proposed by a reduced set of material properties due to their easier implementation in reality and little need for an inhomogeneous permeability distribution, but the drawback of undesired scattering caused by the impedance mismatching at the outer boundary is unavoidable in such a cloak. By properly designing the coordinate transformation function to ensure impedance matching at the outer surface, we show that the performance of a nonmagnetic cylindrical cloak could be improved with minimized scattering fields. Using either a single high order power function or an optimized piecewise continuous power function, a cylindrical non-magnetic cloak has been designed with nearly perfect cloaking performance, which is better than those generated with a linear or a quadratic function. Due to the monotonicity of the designed power functions, the resulting cloak has no restriction on the size of the cloaking shell, therefore is suitable for both thick and thin cloaking structures.

Relative-coordinate determination for visual double stars by applying Fourier transforms

Directory of Open Access Journals (Sweden)

Radović Viktor

2013-01-01

Full Text Available We discuss the software developed for the purpose of determining the relative coordinates (position angle θ and separation ρ for visual double or multiple stars. It is based on application of Fourier transforms in treating CCD frames of these systems. The objective was to determine the relative coordinates automatically to an extent as large as possible. In this way the time needed for the reduction of many CCD frames becomes shorter. The capabilities and limitations of the software are examined. Besides, the possibility of improving is also considered. The software has been tested and checked on a sample consisting of CCD frames of 165 double or multiple stars obtained with the 2m telescope at NAO Rozhen in Bulgaria in October 2011. The results have been compared with the corresponding results obtained by applying different software and the agreement is found to be very good.

Building a symbolic computer algebra toolbox to compute 2D Fourier transforms in polar coordinates.

Science.gov (United States)

Dovlo, Edem; Baddour, Natalie

2015-01-01

The development of a symbolic computer algebra toolbox for the computation of two dimensional (2D) Fourier transforms in polar coordinates is presented. Multidimensional Fourier transforms are widely used in image processing, tomographic reconstructions and in fact any application that requires a multidimensional convolution. By examining a function in the frequency domain, additional information and insights may be obtained. The advantages of our method include: •The implementation of the 2D Fourier transform in polar coordinates within the toolbox via the combination of two significantly simpler transforms.•The modular approach along with the idea of lookup tables implemented help avoid the issue of indeterminate results which may occur when attempting to directly evaluate the transform.•The concept also helps prevent unnecessary computation of already known transforms thereby saving memory and processing time.

Changes in measured vector magnetic fields when transformed into heliographic coordinates

Science.gov (United States)

Hagyard, M. J.

1987-01-01

The changes that occur in measured magnetic fields when they are transformed into a heliographic coordinate system are investigated. To carry out this investigation, measurements of the vector magnetic field of an active region that was observed at 1/3 the solar radius from disk center are taken, and the observed field is transformed into heliographic coordinates. Differences in the calculated potential field that occur when the heliographic normal component of the field is used as the boundary condition rather than the observed line-of-sight component are also examined. The results of this analysis show: (1) that the observed fields of sunspots more closely resemble the generally accepted picture of the distribution of umbral fields if they are displayed in heliographic coordinates; (2) that the differences in the potential calculations are less than 200 G in field strength and 20 deg in field azimuth outside sunspots; and (3) that differences in the two potential calculations in the sunspot areas are no more than 400 G in field strength but range from 60 to 80 deg in field azimuth in localized umbral areas.

Up-to-date Geomagnetic Coordinate Transforms with AACGM

Science.gov (United States)

Stephens, G. K.; Morrison, D.; Barnes, R. J.; Potter, M.; Schaefer, R. K.

2017-12-01

Geomagnetic plasmas organize along magnetic field lines, thus, it is often appropriate to use magnetic field line conjunctions for comparisons between spacecraft observations. Due to the expense of tracing magnetic field lines, the Altitude-Adjusted Corrected GeoMagnetic (AACGM) coordinate system is used. The (AACGM) coordinates are defined by the best fit dipole of the Earth's magnetic field and have been a standard tool used by the SPA community for a long time. However, standard 5 year updated coefficients for this transform are no longer available after the 2010 set. A new version of AACGM (V2 - Shepard, 2014) has been defined. AACGM V2 is fit to a spherical harmonic expansion. A pitfall with this V2 coordinate system is that it is undefined near the magnetic equator, which is problematic for determining conjunctions for spacecraft that with ground stations that pass through these regions. We have derived a new set of coefficients valid for the current epoch that allow us to continue to use the original version of AACGM. We also explore the errors that are introduced by ignoring the magnetic field caused by magnetospheric electric currents. The derived coefficients are made available to the public along with Java software that can be used to evaluate the AACGM coordinates. Shepard, S., 2014, Altitude-Adjusted Corrected Geomagnetic Coordinates: Definition and Functional Approximations, Jour. Geophys. Res., 119, 020264, DOI:10.1002/2014JA020264

Coordinate transformation and Polynomial Chaos for the Bayesian inference of a Gaussian process with parametrized prior covariance function

KAUST Repository

Sraj, Ihab; Le Maî tre, Olivier P.; Knio, Omar; Hoteit, Ibrahim

2015-01-01

using a coordinate transformation to account for the dependence with respect to the covariance hyper-parameters. Polynomial Chaos expansions are employed for the acceleration of the Bayesian inference using similar coordinate transformations, enabling us

A new perspective on relativistic transformation: formulation of the differential Lorentz transformation based on first principles

International Nuclear Information System (INIS)

Huang, Young-Sea

2010-01-01

The differential Lorentz transformation is formulated solely from the principle of relativity and the invariance of the speed of light. The differential Lorentz transformation transforms physical quantities, instead of space-time coordinates, to keep laws of nature form-invariant among inertial frames. The new relativistic transformation fulfills the principle of relativity, whereas the usual Lorentz transformation of space-time coordinates does not. Furthermore, the new relativistic transformation is compatible with quantum mechanics. The formulation herein provides theoretical foundations for the differential Lorentz transformation as the fundamental relativistic transformation.

4D ANIMATION RECONSTRUCTION FROM MULTI-CAMERA COORDINATES TRANSFORMATION

Directory of Open Access Journals (Sweden)

J. P. Jhan

2016-06-01

Full Text Available Reservoir dredging issues are important to extend the life of reservoir. The most effective and cost reduction way is to construct a tunnel to desilt the bottom sediment. Conventional technique is to construct a cofferdam to separate the water, construct the intake of tunnel inside and remove the cofferdam afterwards. In Taiwan, the ZengWen reservoir dredging project will install an Elephant-trunk Steel Pipe (ETSP in the water to connect the desilting tunnel without building the cofferdam. Since the installation is critical to the whole project, a 1:20 model was built to simulate the installation steps in a towing tank, i.e. launching, dragging, water injection, and sinking. To increase the construction safety, photogrammetry technic is adopted to record images during the simulation, compute its transformation parameters for dynamic analysis and reconstruct the 4D animations. In this study, several Australis© coded targets are fixed on the surface of ETSP for auto-recognition and measurement. The cameras orientations are computed by space resection where the 3D coordinates of coded targets are measured. Two approaches for motion parameters computation are proposed, i.e. performing 3D conformal transformation from the coordinates of cameras and relative orientation computation by the orientation of single camera. Experimental results show the 3D conformal transformation can achieve sub-mm simulation results, and relative orientation computation shows the flexibility for dynamic motion analysis which is easier and more efficiency.

Spinorial relativistic rotator: the transformation from quasi-Newtonian to Minkowski coordinates

International Nuclear Information System (INIS)

Biedenharn, L.C.; Bohm, A.; Tarlini, M.; van Dam, H.; Mukunda, N.

1983-12-01

There exists a remarkably close relationship between the operator algebra of the Dirac equation and the corresponding operators of the spinorial relativistic rotator (an indecomposable object lying on a mass-spin Regge trajectory). The analog of the Foldy-Wouthuysen transformation (more generally, the transformation between quasi-Newtonian and Minkowski coordinates) is constructed and explicit results are discussed for the spin and position operators. Zitterbewegung is shown to exist for a system having only positive energies. 31 references

MR-guided stereotactic neurosurgery-comparison of fiducial-based and anatomical landmark transformation approaches

International Nuclear Information System (INIS)

Hunsche, S; Sauner, D; Maarouf, M; Hoevels, M; Luyken, K; Schulte, O; Lackner, K; Sturm, V; Treuer, H

2004-01-01

For application in magnetic resonance (MR) guided stereotactic neurosurgery, two methods for transformation of MR-image coordinates in stereotactic, frame-based coordinates exist: the direct stereotactic fiducial-based transformation method and the indirect anatomical landmark method. In contrast to direct stereotactic MR transformation, indirect transformation is based on anatomical landmark coregistration of stereotactic computerized tomography and non-stereotactic MR images. In a patient study, both transformation methods have been investigated with visual inspection and mutual information analysis. Comparison was done for our standard imaging protocol, including t2-weighted spin-echo as well as contrast enhanced t1-weighted gradient-echo imaging. For t2-weighted spin-echo imaging, both methods showed almost similar and satisfying performance with a small, but significant advantage for fiducial-based transformation. In contrast, for t1-weighted gradient-echo imaging with more geometric distortions due to field inhomogenities and gradient nonlinearity than t2-weighted spin-echo imaging, mainly caused by a reduced bandwidth per pixel, anatomical landmark transformation delivered markedly better results. Here, fiducial-based transformation yielded results which are intolerable for stereotactic neurosurgery. Mean Euclidian distances between both transformation methods were 0.96 mm for t2-weighted spin-echo and 1.67 mm for t1-weighted gradient-echo imaging. Maximum deviations were 1.72 mm and 3.06 mm, respectively

MR-guided stereotactic neurosurgery-comparison of fiducial-based and anatomical landmark transformation approaches

Energy Technology Data Exchange (ETDEWEB)

Hunsche, S [Department of Stereotaxy and Functional Neurosurgery, University of Cologne, Cologne (Germany); Sauner, D [Institute for Diagnostic and Interventional Radiology, Friedrich-Schiller-University of Jena, Jena (Germany); Maarouf, M [Department of Stereotaxy and Functional Neurosurgery, University of Cologne, Cologne (Germany); Hoevels, M [Department of Stereotaxy and Functional Neurosurgery, University of Cologne, Cologne (Germany); Luyken, K [Department of Stereotaxy and Functional Neurosurgery, University of Cologne, Cologne (Germany); Schulte, O [Department of Radiology, University of Cologne, Cologne (Germany); Lackner, K [Department of Radiology, University of Cologne, Cologne (Germany); Sturm, V [Department of Stereotaxy and Functional Neurosurgery, University of Cologne, Cologne (Germany); Treuer, H [Department of Stereotaxy and Functional Neurosurgery, University of Cologne, Cologne (Germany)

2004-06-21

For application in magnetic resonance (MR) guided stereotactic neurosurgery, two methods for transformation of MR-image coordinates in stereotactic, frame-based coordinates exist: the direct stereotactic fiducial-based transformation method and the indirect anatomical landmark method. In contrast to direct stereotactic MR transformation, indirect transformation is based on anatomical landmark coregistration of stereotactic computerized tomography and non-stereotactic MR images. In a patient study, both transformation methods have been investigated with visual inspection and mutual information analysis. Comparison was done for our standard imaging protocol, including t2-weighted spin-echo as well as contrast enhanced t1-weighted gradient-echo imaging. For t2-weighted spin-echo imaging, both methods showed almost similar and satisfying performance with a small, but significant advantage for fiducial-based transformation. In contrast, for t1-weighted gradient-echo imaging with more geometric distortions due to field inhomogenities and gradient nonlinearity than t2-weighted spin-echo imaging, mainly caused by a reduced bandwidth per pixel, anatomical landmark transformation delivered markedly better results. Here, fiducial-based transformation yielded results which are intolerable for stereotactic neurosurgery. Mean Euclidian distances between both transformation methods were 0.96 mm for t2-weighted spin-echo and 1.67 mm for t1-weighted gradient-echo imaging. Maximum deviations were 1.72 mm and 3.06 mm, respectively.

Application of photogrammetry to transforming PIV-acquired velocity fields to a moving-body coordinate system

Science.gov (United States)

Nikoueeyan, Pourya; Naughton, Jonathan

2016-11-01

Particle Image Velocimetry is a common choice for qualitative and quantitative characterization of unsteady flows associated with moving bodies (e.g. pitching and plunging airfoils). Characterizing the separated flow behavior is of great importance in understanding the flow physics and developing predictive reduced-order models. In most studies, the model under investigation moves within a fixed camera field-of-view, and vector fields are calculated based on this fixed coordinate system. To better characterize the genesis and evolution of vortical structures in these unsteady flows, the velocity fields need to be transformed into the moving-body frame of reference. Data converted to this coordinate system allow for a more detailed analysis of the flow field using advanced statistical tools. In this work, a pitching NACA0015 airfoil has been used to demonstrate the capability of photogrammetry for such an analysis. Photogrammetry has been used first to locate the airfoil within the image and then to determine an appropriate mask for processing the PIV data. The photogrammetry results are then further used to determine the rotation matrix that transforms the velocity fields to airfoil coordinates. Examples of the important capabilities such a process enables are discussed. P. Nikoueeyan is supported by a fellowship from the University of Wyoming's Engineering Initiative.

Nonlinear Effects in Transformation Optics-Based Metamaterial Shields for Counter Directed Energy Weapon Defense

Science.gov (United States)

2016-06-01

employs the in- variance of the Maxwell equations under coordinate transformations to convert the free- space wave solutions in a coordinate... ENERGY WEAPON DEFENSE by Jacob D. Thompson June 2016 Thesis Co-Advisors: James Luscombe Brett Borden Approved for public release; distribution is...2014 to 06-17-2016 4. TITLE AND SUBTITLE NONLINEAR EFFECTS IN TRANSFORMATION OPTICS-BASED METAMATE- RIAL SHIELDS FOR COUNTER DIRECTED ENERGY WEAPON

Copper coordination polymers constructed from thiazole-5-carboxylic acid: Synthesis, crystal structures, and structural transformation

Energy Technology Data Exchange (ETDEWEB)

Meundaeng, Natthaya; Rujiwatra, Apinpus [Department of Chemistry, Faculty of Science, Chiang Mai University, Chiang Mai 50200 (Thailand); Prior, Timothy J., E-mail: t.prior@hull.ac.uk [Chemistry, University of Hull, Kingston upon Hull HU6 7RX (United Kingdom)

2017-01-15

We have successfully prepared crystals of thiazole-5-carboxylic acid (5-Htza) (L) and three new thiazole-5-carboxylate-based Cu{sup 2+} coordination polymers with different dimensionality, namely, 1D [Cu{sub 2}(5-tza){sub 2}(1,10-phenanthroline){sub 2}(NO{sub 3}){sub 2}] (1), 2D [Cu(5-tza){sub 2}(MeOH){sub 2}] (2), and 3D [Cu(5-tza){sub 2}]·H{sub 2}O (3). These have been characterized by single crystal X-ray diffraction and thermogravimetry. Interestingly, the 2D network structure of 2 can directly transform into the 3D framework of 3 upon removal of methanol molecules at room temperature. 2 can also undergo structural transformation to produce the same 2D network present in the known [Cu(5-tza){sub 2}]·1.5H{sub 2}O upon heat treatment for 2 h. This 2D network can adsorb water and convert to 3 upon exposure to air. - Highlights: • Rare examples of coordination polymers of thiazole-5-carboxylic acid were prepared. • Non-covalent interactions play a key role on the assembly of the complexes in solid state. • Structural transformation of a 2D framework to a 3D upon removal of methanol is observed.

Transformation-based spherical cloaks designed by an implicit transformation-independent method: theory and optimization

International Nuclear Information System (INIS)

Novitsky, Andrey; Qiu, C-W; Zouhdi, Said

2009-01-01

Based on the concept of the cloak generating function, we propose an implicit transformation-independent method for the required parameters of spherical cloaks without knowing the needed coordinate transformation beforehand. A non-ideal discrete model is used to calculate and optimize the total scattering cross-sections of different profiles of the generating function. A bell-shaped quadratic spherical cloak is found to be the best candidate, which is further optimized by controlling the design parameters involved. Such improved invisibility is steady even when the model is highly discretized.

Significance of application of the nine parametric coordinate transformation where local state network is not enough reliable

Directory of Open Access Journals (Sweden)

Ristić Kornelija T.

2016-01-01

Full Text Available The most commonly used method for establishing the mathematical basis of surveying and spatial data collection is the method of Global Navigation Satellite Positioning System (GNSS. However, these data relate to the World Geodetic Date WGS84 which is different from the State geodetic network,. As a part of realization the project of determining spatial local reference network Mrkonjić Grad the GNSS observations on 15 trigonometric points whose position is known to the State system of coordinates (x, y, h were made. For the purpose of coordinate transformation between the two system two different transformation models were anlyzed. Beside the most commonly used Helmert seven parameter transformation, afina nine parametric transformation was tested. Comparing the two transformations models, conclusion was made that showes some benefits of using affina nine parameter transformation models in Republic of Serpska.

Stable reduced-order models of generalized dynamical systems using coordinate-transformed Arnoldi algorithms

Energy Technology Data Exchange (ETDEWEB)

Silveira, L.M.; Kamon, M.; Elfadel, I.; White, J. [Massachusetts Inst. of Technology, Cambridge, MA (United States)

1996-12-31

Model order reduction based on Krylov subspace iterative methods has recently emerged as a major tool for compressing the number of states in linear models used for simulating very large physical systems (VLSI circuits, electromagnetic interactions). There are currently two main methods for accomplishing such a compression: one is based on the nonsymmetric look-ahead Lanczos algorithm that gives a numerically stable procedure for finding Pade approximations, while the other is based on a less well characterized Arnoldi algorithm. In this paper, we show that for certain classes of generalized state-space systems, the reduced-order models produced by a coordinate-transformed Arnoldi algorithm inherit the stability of the original system. Complete Proofs of our results will be given in the final paper.

Post-synthetic transformation of a Zn(ii) polyhedral coordination network into a new supramolecular isomer of HKUST-1.

Science.gov (United States)

Chen, Yao; Wojtas, Lukasz; Ma, Shengqian; Zaworotko, Michael J; Zhang, Zhenjie

2017-08-03

A Zn-based porphyrin containing metal-organic material (porphMOM-1) was transformed into a novel Cu-based porphyrin-encapsulating metal-organic material (porph@HKUST-1-β) via a one-pot post-synthetic modification (PSM) process involving both metal ion exchange and linker installation of trimesic acid. HKUST-1-β is the first example of yao topology and is to our knowledge the first supramolecular isomer of the archetypal coordination network HKUST-1.

Coordinate transformation and Polynomial Chaos for the Bayesian inference of a Gaussian process with parametrized prior covariance function

KAUST Repository

Sraj, Ihab

2015-10-22

This paper addresses model dimensionality reduction for Bayesian inference based on prior Gaussian fields with uncertainty in the covariance function hyper-parameters. The dimensionality reduction is traditionally achieved using the Karhunen-Loève expansion of a prior Gaussian process assuming covariance function with fixed hyper-parameters, despite the fact that these are uncertain in nature. The posterior distribution of the Karhunen-Loève coordinates is then inferred using available observations. The resulting inferred field is therefore dependent on the assumed hyper-parameters. Here, we seek to efficiently estimate both the field and covariance hyper-parameters using Bayesian inference. To this end, a generalized Karhunen-Loève expansion is derived using a coordinate transformation to account for the dependence with respect to the covariance hyper-parameters. Polynomial Chaos expansions are employed for the acceleration of the Bayesian inference using similar coordinate transformations, enabling us to avoid expanding explicitly the solution dependence on the uncertain hyper-parameters. We demonstrate the feasibility of the proposed method on a transient diffusion equation by inferring spatially-varying log-diffusivity fields from noisy data. The inferred profiles were found closer to the true profiles when including the hyper-parameters’ uncertainty in the inference formulation.

Solvent-vapour-assisted pathways and the role of pre-organization in solid-state transformations of coordination polymers

Directory of Open Access Journals (Sweden)

James S. Wright

2015-03-01

Full Text Available A family of one-dimensional coordination polymers, [Ag4(O2C(CF22CF34(phenazine2(arenen]·m(arene, 1 (arene = toluene or xylene, have been synthesized and crystallographically characterized. Arene guest loss invokes structural transformations to yield a pair of polymorphic coordination polymers [Ag4(O2C(CF22CF34(phenazine2], 2a and/or 2b, with one- and two-dimensional architectures, respectively. The role of pre-organization of the polymer chains of 1 in the selectivity for formation of either polymorph is explored, and the templating effect of toluene and p-xylene over o-xylene or m-xylene in the formation of arene-containing architecture 1 is also demonstrated. The formation of arene-free phase 2b, not accessible in a phase-pure form through other means, is shown to be the sole product of loss of toluene from 1-tol·tol [Ag4(O2C(CF22CF34(phenazine2(toluene]·2(toluene, a phase containing toluene coordinated to Ag(I in an unusual μ:η1,η1 manner. Solvent-vapour-assisted conversion between the polymorphic coordination polymers and solvent-vapour influence on the conversion of coordination polymers 1 to 2a and 2b is also explored. The transformations have been examined and confirmed by X-ray diffraction, NMR spectroscopy and thermal analyses, including in situ diffraction studies of some transformations.

Verification and Validation of a Coordinate Transformation Method in Axisymmetric Transient Magnetics.

Energy Technology Data Exchange (ETDEWEB)

Ashcraft, C. Chace [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Niederhaus, John Henry [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Robinson, Allen C. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2016-01-29

We present a verification and validation analysis of a coordinate-transformation-based numerical solution method for the two-dimensional axisymmetric magnetic diffusion equation, implemented in the finite-element simulation code ALEGRA. The transformation, suggested by Melissen and Simkin, yields an equation set perfectly suited for linear finite elements and for problems with large jumps in material conductivity near the axis. The verification analysis examines transient magnetic diffusion in a rod or wire in a very low conductivity background by first deriving an approximate analytic solution using perturbation theory. This approach for generating a reference solution is shown to be not fully satisfactory. A specialized approach for manufacturing an exact solution is then used to demonstrate second-order convergence under spatial refinement and tem- poral refinement. For this new implementation, a significant improvement relative to previously available formulations is observed. Benefits in accuracy for computed current density and Joule heating are also demonstrated. The validation analysis examines the circuit-driven explosion of a copper wire using resistive magnetohydrodynamics modeling, in comparison to experimental tests. The new implementation matches the accuracy of the existing formulation, with both formulations capturing the experimental burst time and action to within approximately 2%.

Transformation magneto-statics and illusions for magnets

Science.gov (United States)

Sun, Fei; He, Sailing

2014-10-01

Based on the form-invariant of Maxwell's equations under coordinate transformations, we extend the theory of transformation optics to transformation magneto-statics, which can design magnets through coordinate transformations. Some novel DC magnetic field illusions created by magnets (e.g. rescaling magnets, cancelling magnets and overlapping magnets) are designed and verified by numerical simulations. Our research will open a new door to designing magnets and controlling DC magnetic fields.

Geomorphometric analysis of selected Martian craters using polar coordinate transformation

Science.gov (United States)

Magyar, Zoltán; Koma, Zsófia; Székely, Balázs

2016-04-01

Centrally symmetric landform elements are very common features on the surface of the planet Mars. The most conspicuous ones of them are the impact craters of various size. However, a closer look on these features reveals that they show often asymmetric patterns as well. These are partially related to the geometry of the trajectory of the impacting body, but sometimes it is a result of surface processes (e.g., freeze/thaw cycles, mass movements). Geomorphometric studies have already been carried out to reveal these pecularities. Our approach, the application of polar coordinate transformation (PCT) very sensitively enhances the non-radial and non-circular shapes. We used digital terrain models (DTMs) derived from the ESA Mars Express HRSC imagery. The original DTM or its derivatives (e.g. slope angle or aspect) are PCT transformed. We analyzed the craters inter alia with scattergrams in polar coordinates. The resulting point cloud can be used directly for the analysis, but in some cases an interpolation should be applied to enhance certain non-circular features (especially in case of smaller craters). Visual inspection of the crater slopes, coloured by the aspect, reveals smaller features. Some of them are processing artefacts, but many of them are related to local undulations in the topography or indications of mass movements. In many cases the undulations of the crater rim are due to erosional processes. The drawbacks of the technology are related to the uneven resolution of the projected image: features in the crater centre should be left out from the analysis because PCT has a low resolution around the projection center. Furthermore, the success of the PCT depends on the correct definition of the projection centre: erroneously centered images are not suitable for analysis. The PCT transformed images are also suitable for radial averaging and calculation of standard deviations, resulting in typical, comparable craters shapes. These studies may lead to a deeper

On the theory of transformations of coordinates for massive systems of reference

International Nuclear Information System (INIS)

Sadykov, B.S.

1978-01-01

Suggested is a new local group of coordinate transformations of reference systems connected with massive bodies, such as the Earth, the Sun and so on, which are rather inertial in the kinematic relation, but possess different gravitational fields. The effect of the gravitational field of the reference body upon the metric of the system is taken into account. For identical systems the new group transfers into the Lorentz group

Destruction of Invariant Surfaces and Magnetic Coordinates for Perturbed Magnetic Fields

International Nuclear Information System (INIS)

Hudson, S.R.

2003-01-01

Straight-field-line coordinates are constructed for nearly integrable magnetic fields. The coordinates are based on the robust, noble-irrational rotational-transform surfaces, whose existence is determined by an application of Greene's residue criterion. A simple method to locate these surfaces is described. Sequences of surfaces with rotational-transform converging to low order rationals maximize the region of straight-field-line coordinates

New approach to isometric transformations in oblique local coordinate systems of reference

Directory of Open Access Journals (Sweden)

Stępień Grzegorz

2017-12-01

Full Text Available The research article describes a method of isometric transformation and determining an exterior orientation of a measurement instrument. The method is based on a designation of a “virtual” translation of two relative oblique orthogonal systems to a common, known in the both systems, point. The relative angle orientation of the systems does not change as each of the systems is moved along its axis. The next step is the designation of the three rotation angles (e.g. Tait-Bryan or Euler angles, transformation of the system convoluted at the calculated angles and moving the system to the initial position where the primary coordinate system was. This way eliminates movements of the systems from the calculations and makes it possible to calculate angles of mutual rotation angles of two orthogonal systems primarily involved in the movement. The research article covers laboratory calculations for simulated data. The accuracy of the results is 10-6 m (10-3 regarding the accuracy of the input data. This confi rmed the correctness of the assumed calculation method. In the following step the method was verifi ed under fi eld conditions, where the accuracy of the method raised to 0.003 m. The proposed method enabled to make the measurements with the oblique and uncentered instrument, e.g. total station instrument set over an unknown point. This is the reason why the method was named by the authors as Total Free Station - TFS. The method may be also used for isometric transformations for photogrammetric purposes.

An efficient coordinate transformation technique for unsteady, transonic aerodynamic analysis of low aspect-ratio wings

Science.gov (United States)

Guruswamy, G. P.; Goorjian, P. M.

1984-01-01

An efficient coordinate transformation technique is presented for constructing grids for unsteady, transonic aerodynamic computations for delta-type wings. The original shearing transformation yielded computations that were numerically unstable and this paper discusses the sources of those instabilities. The new shearing transformation yields computations that are stable, fast, and accurate. Comparisons of those two methods are shown for the flow over the F5 wing that demonstrate the new stability. Also, comparisons are made with experimental data that demonstrate the accuracy of the new method. The computations were made by using a time-accurate, finite-difference, alternating-direction-implicit (ADI) algorithm for the transonic small-disturbance potential equation.

An Improved Surface Simplification Method for Facial Expression Animation Based on Homogeneous Coordinate Transformation Matrix and Maximum Shape Operator

Directory of Open Access Journals (Sweden)

Juin-Ling Tseng

2016-01-01

Full Text Available Facial animation is one of the most popular 3D animation topics researched in recent years. However, when using facial animation, a 3D facial animation model has to be stored. This 3D facial animation model requires many triangles to accurately describe and demonstrate facial expression animation because the face often presents a number of different expressions. Consequently, the costs associated with facial animation have increased rapidly. In an effort to reduce storage costs, researchers have sought to simplify 3D animation models using techniques such as Deformation Sensitive Decimation and Feature Edge Quadric. The studies conducted have examined the problems in the homogeneity of the local coordinate system between different expression models and in the retainment of simplified model characteristics. This paper proposes a method that applies Homogeneous Coordinate Transformation Matrix to solve the problem of homogeneity of the local coordinate system and Maximum Shape Operator to detect shape changes in facial animation so as to properly preserve the features of facial expressions. Further, root mean square error and perceived quality error are used to compare the errors generated by different simplification methods in experiments. Experimental results show that, compared with Deformation Sensitive Decimation and Feature Edge Quadric, our method can not only reduce the errors caused by simplification of facial animation, but also retain more facial features.

Electric vehicle charging algorithms for coordination of the grid and distribution transformer levels

International Nuclear Information System (INIS)

Ramos Muñoz, Edgar; Razeghi, Ghazal; Zhang, Li; Jabbari, Faryar

2016-01-01

The need to reduce greenhouse gas emissions and fossil fuel consumption has increased the popularity of plug-in electric vehicles. However, a large penetration of plug-in electric vehicles can pose challenges at the grid and local distribution levels. Various charging strategies have been proposed to address such challenges, often separately. In this paper, it is shown that, with uncoordinated charging, distribution transformers and the grid can operate under highly undesirable conditions. Next, several strategies that require modest communication efforts are proposed to mitigate the burden created by high concentrations of plug-in electric vehicles, at the grid and local levels. Existing transformer and battery electric vehicle characteristics are used along with the National Household Travel Survey to simulate various charging strategies. It is shown through the analysis of hot spot temperature and equivalent aging factor that the coordinated strategies proposed here reduce the chances of transformer failure with the addition of plug-in electric vehicle loads, even for an under-designed transformer while uncontrolled and uncoordinated plug-in electric vehicle charging results in increased risk of transformer failure. - Highlights: • Charging algorithm for battery electric vehicles, for high penetration levels. • Algorithm reduces transformer overloading, for grid level valley filling. • Computation and communication requirements are minimal. • The distributed algorithm is implemented without large scale iterations. • Hot spot temperature and loss of life for transformers are evaluated.

Coordinate transformation in the model of long Josephson contacts: geometrically equivalent contacts

International Nuclear Information System (INIS)

Semerdzhieva, E.G.; Boyadzhiev, T.L.; ); Shukrinov, Yu.M.; Physical Technical Institute Dushanbe, 734063

2005-01-01

The transition from model of long Josephson variable-width contact to the contact model with coordinate-dependent Josephson current amplitude is realized by transforming the coordinates. This sets up a correspondence between Josephson contacts of variable width and quasi-one-dimensional contacts of variable thickness barrier layer. It is shown, that for contacts of exponentially varying width the barrier layer of the corresponding quasi-one-dimensional contact contains the distributed resistive inhomogeneity which is an attractor to magnetic flux vortices. With numerical experiments, a 'critical current-magnetic field' dependence for a resistive microinhomogeneity Josephson contact was plotted, and its comparison with the critical curve for a contact of exponentially varying width was made. Thus, this demonstrates that the distributed inhomogeneity may be replaced by a local one at the JC end what technologically, may offer definite advantages

Enhancing success in transition service coordinators: use of transformational leadership.

Science.gov (United States)

Rearick, Ellen

2007-01-01

The lifespan of children with special healthcare needs has been extended because of improved technology and medical advances. Successful transition to the adult arena of healthcare, social services, and education by adolescents with special healthcare needs (ASHCN) is lacking. The transition service coordinator (TSC) is a multifaceted role of advanced practice nursing that provides highly specialized transition services to adolescents with special healthcare needs. The use of key concepts from the transformational leadership theory may improve healthcare outcomes. This article applies to pediatric and adult primary care and case management services that serve adolescents with special healthcare needs. Employing key concepts of transformational leadership theory will enhance the success of the TSC to improve both collaboration among stakeholders in the transitional team and young adults' transition to the world of adult services. Enhanced communication resulting in improved sharing of information, understanding of the stakeholder roles, and provision of formal linkages between pediatric and adult medical providers is a significant outcome affecting the ASHCN. Improved collaboration will produce a smooth transition for the ASHCN to the world of adult social services education, and employment. Incorporating the transformational leadership dimensions of idealized influence, inspirational motivation intellectual stimulation, and individualized consideration will enhance the ability of the TSC to improve collaboration among stakeholders in the transitional team and the quality of services for the ASHCN.

M(II)-dipyridylamide-based coordination frameworks (M=Mn, Co, Ni): Structural transformation

Energy Technology Data Exchange (ETDEWEB)

Tzeng, Biing-Chiau; Selvam, TamilSelvi; Tsai, Miao-Hsin

2016-11-15

A series of 1-D double-zigzag (([M(papx){sub 2}(H{sub 2}O){sub 2}](ClO{sub 4}){sub 2}){sub n}; M=Mn, x=s (1), x=o (3); M=Co, x=s (4), x=o (5); M=Ni, x=s (6), x=o (7)) and 2-D polyrotaxane ([Mn(paps){sub 2}(ClO{sub 4}){sub 2}]{sub n} (2)) frameworks were synthesized by reactions of M(ClO{sub 4}){sub 2} (M=Mn, Co, and Ni) with papx (paps, N,N’-bis(pyridylcarbonyl)-4,4’-diaminodiphenylthioether; papo, N,N’-bis(pyridylcarbonyl)-4,4’-diaminodiphenyl ether), which have been isolated and structurally characterized by X-ray diffraction. Based on powder X-ray diffraction (PXRD) experiments, heating the double-zigzag frameworks underwent structural transformation to give the respective polyrotaxane ones. Moreover, grinding the solid samples of the respective polyrotaxanes in the presence of moisture also resulted in the total conversion to the original double-zigzag frameworks. In this study, we have successfully extended studies to Mn{sup II}, Co{sup II}, and Ni{sup II} frameworks from the previous Zn{sup II}, Cd{sup II}, and Cu{sup II} ones, and interestingly such structural transformation is able to be proven experimentally by powder and single-crystal X-ray diffraction studies as well. - Graphical abstract: 1-D double-zigzag and 2-D polyrotaxane frameworks of M(II)-papx (x=s, o; M=Mn, Co, Ni) frameworks can be interconverted by heating and grinding in the presence of moiture, and such structural transformation has be proven experimentally by powder and single-crystal X-ray diffraction studies.

Hawking effect and quantum nonthermal radiation of an arbitrarily accelerating charged black hole using a new tortoise coordinate transformation

International Nuclear Information System (INIS)

Pan Wei-Zhen; Yang Xue-Jun; Xie Zhi-Kun

2011-01-01

Using a new tortoise coordinate transformation, this paper investigates the Hawking effect from an arbitrarily accelerating charged black hole by the improved Damour—Ruffini method. After the tortoise coordinate transformation, the Klein—Gordon equation can be written as the standard form at the event horizon. Then extending the outgoing wave from outside to inside of the horizon analytically, the surface gravity and Hawking temperature can be obtained automatically. It is found that the Hawking temperatures of different points on the surface are different. The quantum nonthermal radiation characteristics of a black hole near the event horizon is also discussed by studying the Hamilton—Jacobi equation in curved spacetime and the maximum overlap of the positive and negative energy levels near the event horizon is given. There is a dimensional problem in the standard tortoise coordinate and the present results may be more reasonable. (geophysics, astronomy, and astrophysics)

On fractional Fourier transform moments

NARCIS (Netherlands)

Alieva, T.; Bastiaans, M.J.

2000-01-01

Based on the relation between the ambiguity function represented in a quasi-polar coordinate system and the fractional power spectra, the fractional Fourier transform moments are introduced. Important equalities for the global second-order fractional Fourier transform moments are derived and their

A Novel Role for Keratin 17 in Coordinating Oncogenic Transformation and Cellular Adhesion in Ewing Sarcoma

Science.gov (United States)

Sankar, Savita; Tanner, Jason M.; Bell, Russell; Chaturvedi, Aashi; Randall, R. Lor; Beckerle, Mary C.

2013-01-01

Oncogenic transformation in Ewing sarcoma is caused by EWS/FLI, an aberrant transcription factor fusion oncogene. Glioma-associated oncogene homolog 1 (GLI1) is a critical target gene activated by EWS/FLI, but the mechanism by which GLI1 contributes to the transformed phenotype of Ewing sarcoma was unknown. In this work, we identify keratin 17 (KRT17) as a direct downstream target gene upregulated by GLI1. We demonstrate that KRT17 regulates cellular adhesion by activating AKT/PKB (protein kinase B) signaling. In addition, KRT17 is necessary for oncogenic transformation in Ewing sarcoma and accounts for much of the GLI1-mediated transformation function but via a mechanism independent of AKT signaling. Taken together, our data reveal previously unknown molecular functions for a cytoplasmic intermediate filament protein, KRT17, in coordinating EWS/FLI- and GLI1-mediated oncogenic transformation and cellular adhesion in Ewing sarcoma. PMID:24043308

Developing a MATLAB(registered)-Based Tool for Visualization and Transformation

Science.gov (United States)

Anderton, Blake J.

2003-01-01

An important step in the structural design and development of spacecraft is the experimental identification of a structure s modal characteristics, such as its natural frequencies and modes of vibration. These characteristics are vital to developing a representative model of any given structure or analyzing the range of input frequencies that can be handled by a particular structure. When setting up such a representative model of a structure, careful measurements using precision equipment (such as accelerometers and instrumented hammers) must be made on many individual points of the structure in question. The coordinate location of each data point is used to construct a wireframe geometric model of the structure. Response measurements obtained from the accelerometers is used to generate the modal shapes of the particular structure. Graphically, this is displayed as a combination of the ways a structure will ideally respond to a specified force input. Two types of models of the tested structure are often used in modal analysis: an analytic model showing expected behavior of the structure, and an experimental model showing measured results due to observed phenomena. To evaluate the results from the experimental model, a comparison of analytic and experimental results must be made between the two models. However, comparisons between these two models become difficult when the two coordinate orientations differ in a manner such that results are displayed in an unclear fashion. Such a problem proposes the need for a tool that not only communicates a graphical image of a structure s wireframe geometry based on various measurement locations (called nodes), but also allows for a type of transformation of the image s coordinate geometry so that a model s coordinate orientation is made to match the orientation of another model. Such a tool should also be designed so that it is able to construct coordinate geometry based on many different listings of node locations and is able

A vision based top-view transformation model for a vehicle parking assistant.

Science.gov (United States)

Lin, Chien-Chuan; Wang, Ming-Shi

2012-01-01

This paper proposes the Top-View Transformation Model for image coordinate transformation, which involves transforming a perspective projection image into its corresponding bird's eye vision. A fitting parameters searching algorithm estimates the parameters that are used to transform the coordinates from the source image. Using this approach, it is not necessary to provide any interior and exterior orientation parameters of the camera. The designed car parking assistant system can be installed at the rear end of the car, providing the driver with a clearer image of the area behind the car. The processing time can be reduced by storing and using the transformation matrix estimated from the first image frame for a sequence of video images. The transformation matrix can be stored as the Matrix Mapping Table, and loaded into the embedded platform to perform the transformation. Experimental results show that the proposed approaches can provide a clearer and more accurate bird's eye view to the vehicle driver.

A Vision Based Top-View Transformation Model for a Vehicle Parking Assistant

Directory of Open Access Journals (Sweden)

Chien-Chuan Lin

2012-03-01

Full Text Available This paper proposes the Top-View Transformation Model for image coordinate transformation, which involves transforming a perspective projection image into its corresponding bird’s eye vision. A fitting parameters searching algorithm estimates the parameters that are used to transform the coordinates from the source image. Using this approach, it is not necessary to provide any interior and exterior orientation parameters of the camera. The designed car parking assistant system can be installed at the rear end of the car, providing the driver with a clearer image of the area behind the car. The processing time can be reduced by storing and using the transformation matrix estimated from the first image frame for a sequence of video images. The transformation matrix can be stored as the Matrix Mapping Table, and loaded into the embedded platform to perform the transformation. Experimental results show that the proposed approaches can provide a clearer and more accurate bird’s eye view to the vehicle driver.

Optimal oscillation-center transformations

International Nuclear Information System (INIS)

Dewar, R.L.

1984-08-01

A variational principle is proposed for defining that canonical transformation, continuously connected with the identity transformation, which minimizes the residual, coordinate-dependent part of the new Hamiltonian. The principle is based on minimization of the mean-square generalized force. The transformation reduces to the action-angle transformation in that part of the phase space of an integrable system where the orbit topology is that of the unperturbed system, or on primary KAM surfaces. General arguments in favor of this definition are given, based on Galilean invariance, decay of the Fourier spectrum, and its ability to include external fields or inhomogeneous systems. The optimal oscillation-center transformation for the physical pendulum, or particle in a sinusoidal potential, is constructed

Primary cilia and coordination of receptor tyrosine kinase (RTK) and transforming growth factor β (TGF-β) signaling

DEFF Research Database (Denmark)

Christensen, Søren Tvorup; Morthorst, Stine Kjær; Mogensen, Johanne Bay

2017-01-01

are at the root of a pleiotropic group of diseases and syndromic disorders called ciliopathies. In this review, we present an overview of primary cilia-mediated regulation of receptor tyrosine kinase (RTK) and transforming growth factor β (TGF-β) signaling. Further, we discuss how defects in the coordination...

A New Approach to High-accuracy Road Orthophoto Mapping Based on Wavelet Transform

Directory of Open Access Journals (Sweden)

Ming Yang

2011-12-01

Full Text Available Existing orthophoto map based on satellite photography and aerial photography is not precise enough for road marking. This paper proposes a new approach to high-accuracy orthophoto mapping. The approach uses inverse perspective transformation to process the image information and generates the orthophoto fragment. The offline interpolation algorithm is used to process the location information. It processes the dead reckoning and the EKF location information, and uses the result to transform the fragments to the global coordinate system. At last it uses wavelet transform to divides the image to two frequency bands and uses weighted median algorithm to deal with them separately. The result of experiment shows that the map produced with this method has high accuracy.

Solutions to Time-Fractional Diffusion-Wave Equation in Cylindrical Coordinates

Directory of Open Access Journals (Sweden)

Povstenko YZ

2011-01-01

Full Text Available Nonaxisymmetric solutions to time-fractional diffusion-wave equation with a source term in cylindrical coordinates are obtained for an infinite medium. The solutions are found using the Laplace transform with respect to time , the Hankel transform with respect to the radial coordinate , the finite Fourier transform with respect to the angular coordinate , and the exponential Fourier transform with respect to the spatial coordinate . Numerical results are illustrated graphically.

Surface Simplification of 3D Animation Models Using Robust Homogeneous Coordinate Transformation

Directory of Open Access Journals (Sweden)

Juin-Ling Tseng

2014-01-01

Full Text Available The goal of 3D surface simplification is to reduce the storage cost of 3D models. A 3D animation model typically consists of several 3D models. Therefore, to ensure that animation models are realistic, numerous triangles are often required. However, animation models that have a high storage cost have a substantial computational cost. Hence, surface simplification methods are adopted to reduce the number of triangles and computational cost of 3D models. Quadric error metrics (QEM has recently been identified as one of the most effective methods for simplifying static models. To simplify animation models by using QEM, Mohr and Gleicher summed the QEM of all frames. However, homogeneous coordinate problems cannot be considered completely by using QEM. To resolve this problem, this paper proposes a robust homogeneous coordinate transformation that improves the animation simplification method proposed by Mohr and Gleicher. In this study, the root mean square errors of the proposed method were compared with those of the method proposed by Mohr and Gleicher, and the experimental results indicated that the proposed approach can preserve more contour features than Mohr’s method can at the same simplification ratio.

Inverse problem in transformation optics

DEFF Research Database (Denmark)

Novitsky, Andrey

2011-01-01

The straightforward method of transformation optics implies that one starts from the coordinate transformation and determines the Jacobian matrix, the fields and material parameters of the cloak. However, the coordinate transformation appears as an optional function: it is not necessary to know it...

Transformation quantum optics: designing spontaneous emission using coordinate transformations

DEFF Research Database (Denmark)

Zhang, Jingjing; Wubs, Martijn; Ginzburg, Pavel

2016-01-01

Spontaneous decay is a fundamental quantum property of emitters that can be controlled in a material environment via modification of the local density of optical states (LDOS). Here we use transformation optics methods in order to design required density of states and thus spontaneous emission (S......, affect the LDOS in complex materials. Tailoring SE properties using transformation optics approach provides an innovative way for designing emission properties in a complex material environment needed for the development of active nanophotonic devices....

A role based coordination model in agent systems

Institute of Scientific and Technical Information of China (English)

ZHANG Ya-ying; YOU Jin-yuan

2005-01-01

Coordination technology addresses the construction of open, flexible systems from active and independent software agents in concurrent and distributed systems. In most open distributed applications, multiple agents need interaction and communication to achieve their overall goal. Coordination technologies for the Internet typically are concerned with enabling interaction among agents and helping them cooperate with each other.At the same time, access control should also be considered to constrain interaction to make it harmless. Access control should be regarded as the security counterpart of coordination. At present, the combination of coordination and access control remains an open problem. Thus, we propose a role based coordination model with policy enforcement in agent application systems. In this model, coordination is combined with access control so as to fully characterize the interactions in agent systems. A set of agents interacting with each other for a common global system task constitutes a coordination group. Role based access control is applied in this model to prevent unauthorized accesses. Coordination policy is enforced in a distributed manner so that the model can be applied to the open distributed systems such as Intemet. An Internet online auction system is presented as a case study to illustrate the proposed coordination model and finally the performance analysis of the model is introduced.

Material parameters and vector scaling in transformation acoustics

International Nuclear Information System (INIS)

Cummer, Steven A; Rahm, Marco; Schurig, David

2008-01-01

The degree to which the coordinate transformation concept first demonstrated for electromagnetic waves can be applied to other classes of waves remains an open question. In this work, we thoroughly examine the coordinate transformation invariance of acoustic waves. We employ a purely physical argument to show how the acoustic velocity vector must transform differently than the E and H fields in Maxwell's equations, which explains why acoustic coordinate transformation invariance was not found in some previous analyses. A first principles analysis of the acoustic equations under arbitrary coordinate transformations confirms that the divergence operator is preserved only if velocity transforms in this physically correct way. This analysis also yields closed-form expressions for the bulk modulus and mass density tensor of the material required to realize an arbitrary coordinate transformation on the acoustic fields, which we show are equivalent to forms presented elsewhere. We demonstrate the computation of these material parameters in two specific cases and show that the change in velocity and pressure gradient vectors under a nonorthogonal coordinate transformation is precisely how these vectors must change from purely physical arguments. This analysis confirms that all of the electromagnetic devices and materials that have been conceived using the coordinate transformation approach are also in principle realizable for acoustic waves. Together with previous work, this analysis also shows how the curl, divergence and gradient operators maintain form under arbitrary coordinate transformations, opening the door to analyzing other wave systems built on these three vector operators.

A numerical method for the solution of three-dimensional incompressible viscous flow using the boundary-fitted curvilinear coordinate transformation and domain decomposition technique

International Nuclear Information System (INIS)

Umegaki, Kikuo; Miki, Kazuyoshi

1990-01-01

A numerical method is developed to solve three-dimensional incompressible viscous flow in complicated geometry using curvilinear coordinate transformation and domain decomposition technique. In this approach, a complicated flow domain is decomposed into several subdomains, each of which has an overlapping region with neighboring subdomains. Curvilinear coordinates are numerically generated in each subdomain using the boundary-fitted coordinate transformation technique. The modified SMAC scheme is developed to solve Navier-Stokes equations in which the convective terms are discretized by the QUICK method. A fully vectorized computer program is developed on the basis of the proposed method. The program is applied to flow analysis in a semicircular curved, 90deg elbow and T-shape branched pipes. Computational time with the vector processor of the HITAC S-810/20 supercomputer system, is reduced to 1/10∼1/20 of that with a scalar processor. (author)

Phase Coordinate System and p-q Theory Based Methods in Active Filtering Implementation

Directory of Open Access Journals (Sweden)

POPESCU, M.

2013-02-01

Full Text Available This paper is oriented towards implementation of the main theories of powers in the compensating current generation stage of a three-phase three-wire shunt active power system. The system control is achieved through a dSPACE 1103 platform which is programmed under the Matlab/Simulink environment. Four calculation blocks included in a specifically designed Simulink library are successively implemented in the experimental setup. The first two approaches, namely those based on the Fryze-Buchholz-Depenbrock theory and the generalized instantaneous reactive power theory, make use of phase quantities without any transformation of the coordinate system and provide the basis for calculating the compensating current when total compensation is desired. The others are based on the p-q theory concepts and require the direct and reverse transformation to/from the two-phases stationary reference frame. They are used for total compensation and partial compensation of the current harmonic distortion. The experimental results, in terms of active filtering performances, validate the control strategies implementation and provide arguments in choosing the most appropriate method.

Approximate direct georeferencing in national coordinates

Science.gov (United States)

Legat, Klaus

Direct georeferencing has gained an increasing importance in photogrammetry and remote sensing. Thereby, the parameters of exterior orientation (EO) of an image sensor are determined by GPS/INS, yielding results in a global geocentric reference frame. Photogrammetric products like digital terrain models or orthoimages, however, are often required in national geodetic datums and mapped by national map projections, i.e., in "national coordinates". As the fundamental mathematics of photogrammetry is based on Cartesian coordinates, the scene restitution is often performed in a Cartesian frame located at some central position of the image block. The subsequent transformation to national coordinates is a standard problem in geodesy and can be done in a rigorous manner-at least if the formulas of the map projection are rigorous. Drawbacks of this procedure include practical deficiencies related to the photogrammetric processing as well as the computational cost of transforming the whole scene. To avoid these problems, the paper pursues an alternative processing strategy where the EO parameters are transformed prior to the restitution. If only this transition was done, however, the scene would be systematically distorted. The reason is that the national coordinates are not Cartesian due to the earth curvature and the unavoidable length distortion of map projections. To settle these distortions, several corrections need to be applied. These are treated in detail for both passive and active imaging. Since all these corrections are approximations only, the resulting technique is termed "approximate direct georeferencing". Still, the residual distortions are usually very low as is demonstrated by simulations, rendering the technique an attractive approach to direct georeferencing.

Collective coordinates on symplectic manifolds

International Nuclear Information System (INIS)

Razumov, A.V.; Taranov, A.Yu.

1981-01-01

For an arbitrary Lie group of canonical transformations on a symplectic manifold collective coordinates are introduced. They describe a motion of the dynamical system as a whole under the group transformations. Some properties of Lie group of canonical transformations are considered [ru

Ontology-based composition and matching for dynamic service coordination

OpenAIRE

Pahl, Claus; Gacitua-Decar, Veronica; Wang, MingXue; Yapa Bandara, Kosala

2011-01-01

Service engineering needs to address integration problems allowing services to collaborate and coordinate. The need to address dynamic automated changes - caused by on-demand environments and changing requirements - can be addressed through service coordination based on ontology-based composition and matching techniques. Our solution to composition and matching utilises a service coordination space that acts as a passive infrastructure for collaboration. We discuss the information models an...

Relativistic time transfer for a Mars lander: from Areocentric Coordinate Time to Barycentric Coordinate Time

Science.gov (United States)

Yang, Wen-Zheng; Xu, De-Wang; Yu, Qing-Shan; Liu, Jie; Xie, Yi

2017-08-01

As the second step of relativistic time transfer for a Mars lander, we investigate the transformation between Areocentric Coordinate Time (TCA) and Barycentric Coordinate Time (TCB) in the framework of IAU Resolutions. TCA is a local time scale for Mars, which is analogous to the Geocentric Coordinate Time (TCG) for Earth. This transformation has two parts: contributions associated with gravitational bodies and those depending on the position of the lander. After setting the instability of an onboard clock to 10-13 and considering that the uncertainty in time is about 3.2 microseconds after one Earth year, we find that the contributions of the Sun, Mars, Jupiter and Saturn in the leading term associated with these bodies can reach a level exceeding the threshold and must be taken into account. Other terms can be safely ignored in this transformation for a Mars lander.

Solution of the weighted symmetric similarity transformations based on quaternions

Science.gov (United States)

Mercan, H.; Akyilmaz, O.; Aydin, C.

2017-12-01

A new method through Gauss-Helmert model of adjustment is presented for the solution of the similarity transformations, either 3D or 2D, in the frame of errors-in-variables (EIV) model. EIV model assumes that all the variables in the mathematical model are contaminated by random errors. Total least squares estimation technique may be used to solve the EIV model. Accounting for the heteroscedastic uncertainty both in the target and the source coordinates, that is the more common and general case in practice, leads to a more realistic estimation of the transformation parameters. The presented algorithm can handle the heteroscedastic transformation problems, i.e., positions of the both target and the source points may have full covariance matrices. Therefore, there is no limitation such as the isotropic or the homogenous accuracy for the reference point coordinates. The developed algorithm takes the advantage of the quaternion definition which uniquely represents a 3D rotation matrix. The transformation parameters: scale, translations, and the quaternion (so that the rotation matrix) along with their covariances, are iteratively estimated with rapid convergence. Moreover, prior least squares (LS) estimation of the unknown transformation parameters is not required to start the iterations. We also show that the developed method can also be used to estimate the 2D similarity transformation parameters by simply treating the problem as a 3D transformation problem with zero (0) values assigned for the z-components of both target and source points. The efficiency of the new algorithm is presented with the numerical examples and comparisons with the results of the previous studies which use the same data set. Simulation experiments for the evaluation and comparison of the proposed and the conventional weighted LS (WLS) method is also presented.

How can the co-ordinate transformation method of beam matching be extended to include separately labelled collimators?

Science.gov (United States)

Morgan-Fletcher, S; McKenzie, A L

1996-03-01

The problem of matching radiation beams was tackled by Siddon in 1980 using co-ordinate transformations. Since then, the need to distinguish between individual collimators in prescriptions of treatment set-up, brought about by the widespread use of 3-D treatment planning systems and asymmetric fields, as well as a reversal of the rotation sense in the turntable co-ordinate system proposed by the International Electrotechnical Commission, have made it necessary to revisit this particular problem. This paper builds upon Siddon's general equations for the particular case of matching beams, and derives expressions for calculating treatment-unit settings which may be used in a computer program without the need to perform matrix manipulation. The expression treat the individual collimator jaws separately.

Recovering functions from the spherical mean transform with data on an ellipse using eigenfunction expansion in elliptical coordinates

Science.gov (United States)

Salman, Yehonatan

2017-09-01

The aim of this paper is to introduce a new inversion procedure for recovering functions, defined on R2 , from the spherical mean transform, which integrates functions on a prescribed family Λ of circles, where Λ consists of circles whose centers belong to a given ellipse E on the plane. The method presented here follows the same procedure which was used by Norton (J Acoust Soc Am 67:1266-1273, 1980) for recovering functions in case where Λ consists of circles with centers on a circle. However, at some point we will have to modify the method in [24] by using expansion in elliptical coordinates, rather than spherical coordinates, in order to solve the more generalized elliptical case. We will rely on a recent result obtained by Cohl and Volkmer (J Phys A Math Theor 45:355204, 2012) for the eigenfunction expansion of the Bessel function in elliptical coordinates.

METHOD OF SOFTWARE-BASED COMPENSATION OF TECHNOLOGICAL VARIATION IN CHROMATICITY COORDINATES OF LCD PANELS

Directory of Open Access Journals (Sweden)

I. O. Zharinov

2015-05-01

Full Text Available Subject of research. The problem of software-based compensation of technological variation in chromaticity coordinates of liquid crystal panels is considered. A method of software-based compensation of technological variation in chromaticity coordinates is proposed. The method provides the color reproduction characteristics of the series-produced samples on-board indication equipment corresponding to the sample equipment, which is taken as the standard. Method. Mathematical calculation of the profile is performed for the given model of the liquid crystal panel. The coefficients that correspond to the typical values of the chromaticity coordinates for the vertices of the triangle color coverage constitute a reference mathematical model of the plate LCD panel from a specific manufacturer. At the stage of incoming inspection the sample of the liquid crystal panel, that is to be implemented within indication equipment, is mounted on the lighting test unit, where Nokia-Test control is provided by the formation of the RGB codes for display the image of a homogeneous field in the red, green, blue and white. The measurement of the (x,y-chromaticity coordinates in red, green, blue and white colors is performed using a colorimeter with the known value of absolute error. Instead of using lighting equipment, such measurements may be carried out immediately on the sample indication equipment during customizing procedure. The measured values are used to calculate individual LCD-panel profile coefficients through the use of Grassman's transformation, establishing mutual relations between the XYZ-color coordinates and RGB codes to be used for displaying the image on the liquid crystal panel. The obtained coefficients are to be set into the memory of the graphics controller together with the functional software and then used for image displaying. Main results. The efficiency of the proposed method of software-based compensation for technological variation of

Micro practices of coordination based on complex adaptive systems: user needs and strategies for coordinating public health in Denmark.

Science.gov (United States)

Terkildsen, Morten Deleuran; Wittrup, Inge; Burau, Viola

2015-01-01

Many highly formalised approaches to coordination poorly fit public health and recent studies call for coordination based on complex adaptive systems. Our contribution is two-fold. Empirically, we focus on public health, and theoretically we build on the patient perspective and treat coordination as a process of contingent, two-level negotiations of user needs. The paper draws on the concept of user needs-based coordination and sees coordination as a process, whereby needs emerging from the life world of the user are made amenable to the health system through negotiations. The analysis is based on an explorative case study of a health promotion initiative in Denmark. It adopts an anthropological qualitative approach and uses a range of qualitative data. The analysis identifies four strategies of coordination: the coordinator focusing on the individual user or on relations with other professionals; and the manager coaching the coordinator or providing structural support. Crucially, the coordination strategies by management remain weak as they do not directly relate to specific user needs. In process of bottom-up negotiations user needs become blurred and this is especially a challenge for management. The study therefore calls for an increased focus on the level nature of negotiations to bridge the gap that currently weakens coordination strategies by management.

Practical applications of the geographic coordinate data base in Arkansas

Science.gov (United States)

Mickie Warwick; Don C. Bragg

2005-01-01

Though not intended for these applications, the General Land Office (GLO) survey notes are a primary source of historical, ecological, and cultural information, making it imperative that their spatial coordinates be as reliable as possible. The Geographic Coordinate Data Base (GCDB) is a statistically-based coordinate fitting program that uses the GLO notes and other...

Micro practices of coordination based on complex adaptive systems: user needs and strategies for coordinating public health in Denmark

Directory of Open Access Journals (Sweden)

Morten Deleuran Terkildsen

2015-09-01

Full Text Available Introduction: Many highly formalised approaches to coordination poorly fit public health and recent studies call for coordination based on complex adaptive systems. Our contribution is two-fold. Empirically, we focus on public health, and theoretically we build on the patient perspective and treat coordination as a process of contingent, two-level negotiations of user needs.Theory and Methods: The paper draws on the concept of user needs-based coordination and sees coordination as a process, whereby needs emerging from the life world of the user are made amenable to the health system through negotiations. The analysis is based on an explorative case study of a health promotion initiative in Denmark. It adopts an anthropological qualitative approach and uses a range of qualitative data.Results: The analysis identifies four strategies of coordination: the coordinator focusing on the individual user or on relations with other professionals; and the manager coaching the coordinator or providing structural support. Crucially, the coordination strategies by management remain weak as they do not directly relate to specific user needs.Discussion: In process of bottom-up negotiations user needs become blurred and this is especially a challenge for management. The study therefore calls for an increased focus on the level nature of negotiations to bridge the gap that currently weakens coordination strategies by management.

Appraisal of the coordinator-based transplant organizational model.

Science.gov (United States)

Filipponi, F; De Simone, P; Mosca, F

2005-01-01

In 1999, the Italian Parliament passed a law aimed at setting the standards of practice and quality in organ, tissue and cell donation, and transplantation. For the first time in the history of Italian transplantation, a coordinator-based model reproducing some of the basic principles of the Spanish system was officially enacted by the Parliament, bringing to an end years of lacking regulation. What differentiates those coordinator-based systems adopted in Southern Europe from Northern European national and multinational transplant organizations is the functional integration of donor and transplant care activities enacted by national governments. The Italian model of transplant health care consists of four levels of transplant coordination: local, regional, interregional, and national. The latter is represented by Centro Nazionale Trapianti (CNT; the Italian National Center for Transplantation). CNT objectives consist of ensuring equitable access to donation and transplant care for all citizens according to the principles of the Italian National Health System. In achieving these goals, CNT acts in cooperation with three interregional transplant agencies: the Nord Italia Transplant program, the Associazione InterRegionale Trapianti, and the Organizzazione Centro Sud Trapianti. Whereas local and interregional coordinators are at the front line of all donation and transplant activities, regional and national coordinators function to monitor, direct, and plan donation and transplant health care activities. Based on the increase in donation and transplant activities recently achieved in those countries that have adopted a governmental coordinator-based transplant care model, we believe that such a system is appropriate to serve patients' interests according to the principles of subsidiary and equity. However, it should further be improved by expansion of the governance model throughout Europe, through implementation of current standards of care, and by adopting the

Possibility of extending space-time coordinates

International Nuclear Information System (INIS)

Wang Yongcheng.

1993-11-01

It has been shown that one coordinate system can describe a whole space-time region except some supersurfaces on which there are coordinate singularities. The conditions of extending a coordinate from real field to complex field are studied. It has been shown that many-valued coordinate transformations may help us to extend space-time regions and many-valued metric functions may make one coordinate region to describe more than one space-time regions. (author). 11 refs

Extended system of space-time coordinates and generalized translation group of transformations

International Nuclear Information System (INIS)

Yamaleev, R.M.

1980-01-01

A method of extending space-time is considered. In the nonrelativistic case extending goes by joining a scalar to the 3-dimensional radius-vector, completing this to a quaternion. The interpretation of scalar obtained as a parameter of scale transfornation of the generalized translation of group of transformations is given. Some basic expressions of nonrelativistic classical mechanics in the quaternion representation are given. In the relativistic case space-time is constructed from two quaternions: the first one consists of a pair scalar-3-dimensional radius-vector; the second one, of a pair-time-scalar-3-dimensional time-vector. Time and space coordinates, enter into the expression with the opposite signature. The introduction of a time-vector as well as of a new scalar is stipulated by the requirement of the principle of conforming quantum mechanics of the 1/2 spin to classical mechanics [ru

Team Scaffolds: How Minimal Team Structures Enable Role-based Coordination

OpenAIRE

Valentine, Melissa A

2013-01-01

In this dissertation, I integrate research on role-based coordination with concepts adapted from the team effectiveness literature to theorize how minimal team structures support effective coordination when people do not work together regularly. I argue that role-based coordination among relative strangers can be interpersonally challenging and propose that team scaffolds (minimal team structures that bound groups of roles rather than groups of individuals) may provide occupants with a tempor...

Fourier transformations for difference analogs of the harmonic oscillator

International Nuclear Information System (INIS)

Askey, R.; Atakishiyev, N.M.

1995-01-01

The relation between the Mehler bilinear generating function for the Hermite polynomials and the kernel of the Fourier transformation that connect the spaces of coordinate and momentum is discussed. On the base of the relation the discrete analogs of the Fourier transformation for the Kravchuk and Charlier functions are considered. 6 refs

Model Validation in Ontology Based Transformations

Directory of Open Access Journals (Sweden)

Jesús M. Almendros-Jiménez

2012-10-01

Full Text Available Model Driven Engineering (MDE is an emerging approach of software engineering. MDE emphasizes the construction of models from which the implementation should be derived by applying model transformations. The Ontology Definition Meta-model (ODM has been proposed as a profile for UML models of the Web Ontology Language (OWL. In this context, transformations of UML models can be mapped into ODM/OWL transformations. On the other hand, model validation is a crucial task in model transformation. Meta-modeling permits to give a syntactic structure to source and target models. However, semantic requirements have to be imposed on source and target models. A given transformation will be sound when source and target models fulfill the syntactic and semantic requirements. In this paper, we present an approach for model validation in ODM based transformations. Adopting a logic programming based transformational approach we will show how it is possible to transform and validate models. Properties to be validated range from structural and semantic requirements of models (pre and post conditions to properties of the transformation (invariants. The approach has been applied to a well-known example of model transformation: the Entity-Relationship (ER to Relational Model (RM transformation.

Coordination Analysis Using Global Structural Constraints and Alignment-based Local Features

Science.gov (United States)

Hara, Kazuo; Shimbo, Masashi; Matsumoto, Yuji

We propose a hybrid approach to coordinate structure analysis that combines a simple grammar to ensure consistent global structure of coordinations in a sentence, and features based on sequence alignment to capture local symmetry of conjuncts. The weight of the alignment-based features, which in turn determines the score of coordinate structures, is optimized by perceptron training on a given corpus. A bottom-up chart parsing algorithm efficiently finds the best scoring structure, taking both nested or non-overlapping flat coordinations into account. We demonstrate that our approach outperforms existing parsers in coordination scope detection on the Genia corpus.

Synthesis, crystal structure, and magnetic properties of two-dimensional divalent metal glutarate/dipyridylamine coordination polymers, with a single crystal-to-single crystal transformation in the copper derivative

International Nuclear Information System (INIS)

Montney, Matthew R.; Supkowski, Ronald M.; Staples, Richard J.; LaDuca, Robert L.

2009-01-01

Hydrothermal reaction of divalent metal chlorides with glutaric acid and 4,4'-dipyridylamine (dpa) has afforded an isostructural family of coordination polymers with formulation [M(glu)(dpa)] n (M=Co (1), Ni (2), Cu (3); glu=glutarate). Square pyramidal coordination is seen in 1-3, with semi-ligation of a sixth donor to produce a '5+1' extended coordination sphere. Neighboring metal atoms are linked into 1D [M(glu)] n neutral chains through chelating/monodentate bridging glutarate moieties with a syn-anti binding mode, and semi-chelation of the pendant carboxylate oxygen. These chains further connect into 2D layers through dipodal dpa ligands. Neighboring layers stack into the pseudo 3D crystal structure of 1-3 through supramolecular hydrogen bonding between dpa amine units and the semi-chelated glutarate oxygen atoms. The variable temperature magnetic behavior of 1-3 was explored and modeled as infinite 1D Heisenberg chains. Notably, complex 3 undergoes a thermally induced single crystal-to-single crystal transformation between centric and acentric space groups, with a conformationally disordered unilayer structure at 293 K and an ordered bilayer structure at 173 K. All materials were further characterized via infrared spectroscopy and elemental and thermogravimetric analyses. - Graphical abstract: The coordination polymers [M(glu)(dpa)] n (M=Co (1), Ni (2), Cu (3); glu=glutarate, dpa=4,4'-dipyridylamine) exhibit 2D layer structures based on 1D [M(glu)] n chains linked through dpa tethers. Antiferromagnetic coupling is observed for 2 and 3, while ferromagnetism is predominant in 1. Compound 3 undergoes a thermally induced single crystal-to-single crystal transformation from an acentric to a centrosymmetric space group

Coordinate based random effect size meta-analysis of neuroimaging studies.

Science.gov (United States)

Tench, C R; Tanasescu, Radu; Constantinescu, C S; Auer, D P; Cottam, W J

2017-06-01

Low power in neuroimaging studies can make them difficult to interpret, and Coordinate based meta-analysis (CBMA) may go some way to mitigating this issue. CBMA has been used in many analyses to detect where published functional MRI or voxel-based morphometry studies testing similar hypotheses report significant summary results (coordinates) consistently. Only the reported coordinates and possibly t statistics are analysed, and statistical significance of clusters is determined by coordinate density. Here a method of performing coordinate based random effect size meta-analysis and meta-regression is introduced. The algorithm (ClusterZ) analyses both coordinates and reported t statistic or Z score, standardised by the number of subjects. Statistical significance is determined not by coordinate density, but by a random effects meta-analyses of reported effects performed cluster-wise using standard statistical methods and taking account of censoring inherent in the published summary results. Type 1 error control is achieved using the false cluster discovery rate (FCDR), which is based on the false discovery rate. This controls both the family wise error rate under the null hypothesis that coordinates are randomly drawn from a standard stereotaxic space, and the proportion of significant clusters that are expected under the null. Such control is necessary to avoid propagating and even amplifying the very issues motivating the meta-analysis in the first place. ClusterZ is demonstrated on both numerically simulated data and on real data from reports of grey matter loss in multiple sclerosis (MS) and syndromes suggestive of MS, and of painful stimulus in healthy controls. The software implementation is available to download and use freely. Copyright © 2017 Elsevier Inc. All rights reserved.

One-Pot Synthesis of Co-Based Coordination Polymer Nanowire for Li-Ion Batteries with Great Capacity and Stable Cycling Stability

Science.gov (United States)

Wang, Peng; Lou, Xiaobing; Li, Chao; Hu, Xiaoshi; Yang, Qi; Hu, Bingwen

2018-06-01

Nanowire coordination polymer cobalt-terephthalonitrile (Co-BDCN) was successfully synthesized using a simple solvothermal method and applied as anode material for lithium-ion batteries (LIBs). A reversible capacity of 1132 mAh g-1 was retained after 100 cycles at a rate of 100 mA g-1, which should be one of the best LIBs performances among metal organic frameworks and coordination polymers-based anode materials at such a rate. On the basis of the comprehensive structural and morphology characterizations including fourier transform infrared spectroscopy, 1H NMR, 13C NMR, and scanning electron microscopy, we demonstrated that the great electrochemical performance of the as-synthesized Co-BDCN coordination polymer can be attributed to the synergistic effect of metal centers and organic ligands, as well as the stability of the nanowire morphology during cycling.[Figure not available: see fulltext.

A Potential Issue Involving the Application of the Unit Base Transformation to the Interpolation of Secondary Energy Distributions

International Nuclear Information System (INIS)

T Sutton; T Trumbull

2005-01-01

Secondary neutron energy spectra used by Monte Carlo codes are often provided in tabular format. Examples are the spectra obtained from ENDF/B-VI File 5 when the LF parameter has the value 1. These secondary spectra are tabulated on an incident energy mesh, and in a Monte Carlo calculation the tabulated spectra are generally interpolated to the energy of the incident neutron. A common method of interpolation involves the use of the unit base transformation. The details of the implementation vary from code to code, so here we will simply focus on the mathematics of the method. Given an incident neutron with energy E, the bracketing points E i and E i+1 on the incident energy mesh are determined. The corresponding secondary energy spectra are transformed to a dimensionless energy coordinate system in which the secondary energies lie between zero and one. A dimensionless secondary energy is then sampled from a spectrum obtained by linearly interpolating the transformed spectra--often using the method of statistical interpolation. Finally, the sampled secondary energy is transformed back into the normal energy coordinate system. For this inverse transformation, the minimum and maximum energies are linearly interpolated from the values given in the non-transformed secondary spectra. The purpose of the unit base transformation is to preserve (as nearly as possible) the physics of the secondary distribution--in particular the minimum and maximum energies possible for the secondary neutron. This method is used by several codes including MCNP and the new MC21 code that is the subject of this paper. In comparing MC21 results to those of MCNP, it was discovered that the nuclear data supplied to MCNP is structured in such a way that the code may not be doing the best possible job of preserving the physics of certain nuclear interactions. In this paper, we describe the problem and explain how it may be avoided

An Unbiased Unscented Transform Based Kalman Filter for 3D Radar

Institute of Scientific and Technical Information of China (English)

WANGGuohong; XIUJianjuan; HEYou

2004-01-01

As a derivative-free alternative to the Extended Kalman filter (EKF) in the framework of state estimation, the Unscented Kalman filter (UKF) has potential applications in nonlinear filtering. By noting the fact that the unscented transform is generally biased when converting the radar measurements from spherical coordinates into Cartesian coordinates, a new filtering algorithm for 3D radar, called Unbiased unscented Kalman filter (UUKF), is proposed. The new algorithm is validated by Monte Carlo simulation runs. Simulation results show that the UUKF is more effective than the UKF, EKF and the Converted measurement Kalman filter (CMKF).

Internal or shape coordinates in the n-body problem

International Nuclear Information System (INIS)

Littlejohn, R.G.; Reinsch, M.

1995-01-01

The construction of global shape coordinates for the n-body problem is considered. Special attention is given to the three- and four-body problems. Quantities, including candidates for coordinates, are organized according to their transformation properties under so-called democracy transformations (orthogonal transformations of Jacobi vectors). Important submanifolds of shape space are identified and their topology studied, including the manifolds upon which shapes are coplanar or collinear, and the manifolds upon which the moment of inertia tensor is degenerate

Vaidya spacetime in the diagonal coordinates

Energy Technology Data Exchange (ETDEWEB)

Berezin, V. A., E-mail: berezin@inr.ac.ru; Dokuchaev, V. I., E-mail: dokuchaev@inr.ac.ru; Eroshenko, Yu. N., E-mail: eroshenko@inr.ac.ru [Russian Academy of Sciences, Institute for Nuclear Research (Russian Federation)

2017-03-15

We have analyzed the transformation from initial coordinates (v, r) of the Vaidya metric with light coordinate v to the most physical diagonal coordinates (t, r). An exact solution has been obtained for the corresponding metric tensor in the case of a linear dependence of the mass function of the Vaidya metric on light coordinate v. In the diagonal coordinates, a narrow region (with a width proportional to the mass growth rate of a black hole) has been detected near the visibility horizon of the Vaidya accreting black hole, in which the metric differs qualitatively from the Schwarzschild metric and cannot be represented as a small perturbation. It has been shown that, in this case, a single set of diagonal coordinates (t, r) is insufficient to cover the entire range of initial coordinates (v, r) outside the visibility horizon; at least three sets of diagonal coordinates are required, the domains of which are separated by singular surfaces on which the metric components have singularities (either g{sub 00} = 0 or g{sub 00} = ∞). The energy–momentum tensor diverges on these surfaces; however, the tidal forces turn out to be finite, which follows from an analysis of the deviation equations for geodesics. Therefore, these singular surfaces are exclusively coordinate singularities that can be referred to as false fire-walls because there are no physical singularities on them. We have also considered the transformation from the initial coordinates to other diagonal coordinates (η, y), in which the solution is obtained in explicit form, and there is no energy–momentum tensor divergence.

Robust 3D face landmark localization based on local coordinate coding.

Science.gov (United States)

Song, Mingli; Tao, Dacheng; Sun, Shengpeng; Chen, Chun; Maybank, Stephen J

2014-12-01

In the 3D facial animation and synthesis community, input faces are usually required to be labeled by a set of landmarks for parameterization. Because of the variations in pose, expression and resolution, automatic 3D face landmark localization remains a challenge. In this paper, a novel landmark localization approach is presented. The approach is based on local coordinate coding (LCC) and consists of two stages. In the first stage, we perform nose detection, relying on the fact that the nose shape is usually invariant under the variations in the pose, expression, and resolution. Then, we use the iterative closest points algorithm to find a 3D affine transformation that aligns the input face to a reference face. In the second stage, we perform resampling to build correspondences between the input 3D face and the training faces. Then, an LCC-based localization algorithm is proposed to obtain the positions of the landmarks in the input face. Experimental results show that the proposed method is comparable to state of the art methods in terms of its robustness, flexibility, and accuracy.

Research on Copy-Move Image Forgery Detection Using Features of Discrete Polar Complex Exponential Transform

Science.gov (United States)

Gan, Yanfen; Zhong, Junliu

2015-12-01

With the aid of sophisticated photo-editing software, such as Photoshop, copy-move image forgery operation has been widely applied and has become a major concern in the field of information security in the modern society. A lot of work on detecting this kind of forgery has gained great achievements, but the detection results of geometrical transformations of copy-move regions are not so satisfactory. In this paper, a new method based on the Polar Complex Exponential Transform is proposed. This method addresses issues in image geometric moment, focusing on constructing rotation invariant moment and extracting features of the rotation invariant moment. In order to reduce rounding errors of the transform from the Polar coordinate system to the Cartesian coordinate system, a new transformation method is presented and discussed in detail at the same time. The new method constructs a 9 × 9 shrunk template to transform the Cartesian coordinate system back to the Polar coordinate system. It can reduce transform errors to a much greater degree. Forgery detection, such as copy-move image forgery detection, is a difficult procedure, but experiments prove our method is a great improvement in detecting and identifying forgery images affected by the rotated transform.

The Coordinate Transformations Method Combined with AutoLisp to the Archimedean Spiral Representation in Autocad

Directory of Open Access Journals (Sweden)

Sorin Cristian ALBU

2015-12-01

Full Text Available The purpose of this paper is to make the geometric model to the Archimedean spiral, curve often used in practice. Although it is a widely used, in AutoCAD there is no command with which to represent the Archimedean spiral. The method used for determining the mathematical relationships that define the spiral is the coordinate transformation, and for the calculation of the points which define it, is use AutoLISP, representation being made in AutoCAD. The result of this work is to develop an AutoLISP program which can represent the Archimedean spiral, presented a method that can be applied to the representation of any curves used in the technique.

Vehicle coordinated transportation dispatching model base on multiple crisis locations

Science.gov (United States)

Tian, Ran; Li, Shanwei; Yang, Guoying

2018-05-01

Many disastrous events are often caused after unconventional emergencies occur, and the requirements of disasters are often different. It is difficult for a single emergency resource center to satisfy such requirements at the same time. Therefore, how to coordinate the emergency resources stored by multiple emergency resource centers to various disaster sites requires the coordinated transportation of emergency vehicles. In this paper, according to the problem of emergency logistics coordination scheduling, based on the related constraints of emergency logistics transportation, an emergency resource scheduling model based on multiple disasters is established.

Coordinating Work with Groupware

DEFF Research Database (Denmark)

Pors, Jens Kaaber; Simonsen, Jesper

2003-01-01

One important goal of employing groupware is to make possible complex collaboration between geographically distributed groups. This requires a dual transformation of both technology and work practice. The challenge is to re­duce the complexity of the coordination work by successfully inte....... Using the CSCW frame­work of coordination mechanisms, we have elicited six general factors influencing the integration of the groupware application in two situations....

Insulation co-ordination aspects for power stations with generator circuit-breakers

International Nuclear Information System (INIS)

Sanders, M.; Koeppl, G.; Kreuzer, J.

1995-01-01

The generator circuit-breaker (gen. c.b.) located between the generator and the step-up transformer, is now being applied world-wide. It has become a recognized electrical component of power stations which is largely due to economical advantages and increased power station availability. Technical protection considerations for power stations have always been the reason for discussion and the object of improvement. With the use of a gen. c.b., some points of view need to be considered anew. Not only the protection system in case of fault conditions will be influenced, but also the insulation co-ordination philosophy. Below the results of some calculations concerning expected overvoltages are presented. These calculations are based on a transformer rated 264/15.5kV, 220 MVA. But the results are transferable to other power plants. Some measurements carried out on a transformer of the same rating complement the calculations. The findings may contribute to an improvement in insulation co-ordination and protection of the electrical system generator--step-up transformer

A new technique based on the transformation of variables for nonlinear drift and Rossby vortices

International Nuclear Information System (INIS)

Orito, Kohtaro

1996-07-01

The quasi-two-dimensional nonlinear equations for drift and Rossby vortices have some stationary multipole solutions, and especially the dipole vortex solution is called modon. These solutions are valid only in the lowest order where the fluid velocity has a stream function. In order to investigate features of the multipole solutions more accurately, the effect of the higher order terms, for example the polarization drift in a plasma or the Coriolis force in a rotating planet, needs to be considered. It is shown that the higher order analysis through a new technique based on a transformation of variables is much easier than a straightforward iteration. The solutions in this analysis are obtained by inverse transformation to the original coordinates, where the profiles of potentials are distorted by the effects of higher order terms. (author)

Quantization in rotating co-ordinates revisited

International Nuclear Information System (INIS)

Hussain, F.; Qadir, A.

1982-07-01

Recent work on quantization in rotating co-ordinates showed that no radiation would be seen by an observer rotating with a constant angular speed. This work used a Galilean-type co-ordinate transformation. We show that the same result holds for a Lorentz-type co-ordinate system, in spite of the fact that the metric has a co-ordinate singularity at rΩ = 1. Further, we are able to define positive and negative energy modes for a particular case of a non-static, non-stationary metric. (author)

Ten-decimal tables of the logarithms of complex numbers and for the transformation from Cartesian to polar coordinates

CERN Document Server

Lyusternik, L A

1965-01-01

Ten-Decimal Tables of the Logarithms of Complex Numbers and for the Transformation from Cartesian to Polar Coordinates contains Tables of mathematical functions up to ten-decimal value. These tables are compiled in the Department for Approximate Computations of the Institute of Exact Mechanics and Computational Methods of the U.S.S.R. Academy of Sciences. The computations are carried out by this department in conjunction with the Computational-Experimental Laboratory of the Institute.This book will be of value to mathematicians and researchers.

Foundation: Transforming data bases into knowledge bases

Science.gov (United States)

Purves, R. B.; Carnes, James R.; Cutts, Dannie E.

1987-01-01

One approach to transforming information stored in relational data bases into knowledge based representations and back again is described. This system, called Foundation, allows knowledge bases to take advantage of vast amounts of pre-existing data. A benefit of this approach is inspection, and even population, of data bases through an intelligent knowledge-based front-end.

National Coordination Office for Space-Based PNT

Science.gov (United States)

Shaw, M. E.

2008-12-01

In December 2004, President Bush issued the US Policy on space-based positioning, navigation, and timing (PNT), providing guidance on the management of the Global Positioning System (GPS) and other space- based PNT systems. The policy established the National Executive Committee (EXCOM) to advise and coordinate federal agencies on matters related to space-based PNT. Chaired jointly by the deputy secretaries of defense and transportation, the EXCOM includes equivalent level officials from the Departments of State, the Interior, Agriculture, Commerce, and Homeland Security, the Joint Chiefs of Staff, and the National Aeronautics and Space Administration (NASA). A National Coordination Office (NCO) supports the EXCOM through an interagency staff. Since establishing the EXCOM and NCO in 2005, the organizations have quickly grown in influence and effectiveness, leading or managing many interagency initiatives including the development of a Five-Year National Space-Based PNT Plan, the Space-Based PNT Interference Detection and Mitigation (IDM) Plan, and other strategic documents. The NCO has also facilitated interagency coordination on numerous policy issues and on external communications intended to spread a consistent, positive US message about space-based PNT. Role of the NCO - The purpose of the EXCOM is to provide top-level guidance to US agencies regarding space-based PNT infrastructure. The president established it at the deputy secretary level to ensure its strategic recommendations effect real change in agency budgets. Recognizing such high-level officials could only meet every few months, the president directed the EXCOM to establish an NCO to carry out its day-to-day business, including overseeing the implementation of EXCOM action items across the member agencies. These range from the resolution of funding issues to the assessment of strategic policy options. They also include the completion of specific tasks and documents requested by the EXCOM co

Using the transformer oil-based nanofluid for cooling of power distribution transformer

OpenAIRE

Mushtaq Ismael Hasan

2017-01-01

Thermal behavior of electrical distribution transformer has been numerically studied with the effect of surrounding air temperature. 250 KVA distribution transformer is chosen as a study model and studied in temperature range cover the weather conditions of hot places. Transformer oil-based nanofluids were used as a cooling medium instead of pure transformer oil. Four types of solid particles (Cu, Al2O3, TiO2 and SiC) were used to compose nanofluids with volume fractions (1%, 3%, 5%, 7%, and ...

Coordinated control of micro-grid based on distributed moving horizon control.

Science.gov (United States)

Ma, Miaomiao; Shao, Liyang; Liu, Xiangjie

2018-05-01

This paper proposed the distributed moving horizon coordinated control scheme for the power balance and economic dispatch problems of micro-grid based on distributed generation. We design the power coordinated controller for each subsystem via moving horizon control by minimizing a suitable objective function. The objective function of distributed moving horizon coordinated controller is chosen based on the principle that wind power subsystem has the priority to generate electricity while photovoltaic power generation coordinates with wind power subsystem and the battery is only activated to meet the load demand when necessary. The simulation results illustrate that the proposed distributed moving horizon coordinated controller can allocate the output power of two generation subsystems reasonably under varying environment conditions, which not only can satisfy the load demand but also limit excessive fluctuations of output power to protect the power generation equipment. Copyright © 2018 ISA. Published by Elsevier Ltd. All rights reserved.

Effect- and Performance-Based Auditory Feedback on Interpersonal Coordination

Directory of Open Access Journals (Sweden)

Tong-Hun Hwang

2018-03-01

Full Text Available When two individuals interact in a collaborative task, such as carrying a sofa or a table, usually spatiotemporal coordination of individual motor behavior will emerge. In many cases, interpersonal coordination can arise independently of verbal communication, based on the observation of the partners' movements and/or the object's movements. In this study, we investigate how social coupling between two individuals can emerge in a collaborative task under different modes of perceptual information. A visual reference condition was compared with three different conditions with new types of additional auditory feedback provided in real time: effect-based auditory feedback, performance-based auditory feedback, and combined effect/performance-based auditory feedback. We have developed a new paradigm in which the actions of both participants continuously result in a seamlessly merged effect on an object simulated by a tablet computer application. Here, participants should temporally synchronize their movements with a 90° phase difference and precisely adjust the finger dynamics in order to keep the object (a ball accurately rotating on a given circular trajectory on the tablet. Results demonstrate that interpersonal coordination in a joint task can be altered by different kinds of additional auditory information in various ways.

M-estimator for the 3D symmetric Helmert coordinate transformation

Science.gov (United States)

Chang, Guobin; Xu, Tianhe; Wang, Qianxin

2018-01-01

The M-estimator for the 3D symmetric Helmert coordinate transformation problem is developed. Small-angle rotation assumption is abandoned. The direction cosine matrix or the quaternion is used to represent the rotation. The 3 × 1 multiplicative error vector is defined to represent the rotation estimation error. An analytical solution can be employed to provide the initial approximate for iteration, if the outliers are not large. The iteration is carried out using the iterative reweighted least-squares scheme. In each iteration after the first one, the measurement equation is linearized using the available parameter estimates, the reweighting matrix is constructed using the residuals obtained in the previous iteration, and then the parameter estimates with their variance-covariance matrix are calculated. The influence functions of a single pseudo-measurement on the least-squares estimator and on the M-estimator are derived to theoretically show the robustness. In the solution process, the parameter is rescaled in order to improve the numerical stability. Monte Carlo experiments are conducted to check the developed method. Different cases to investigate whether the assumed stochastic model is correct are considered. The results with the simulated data slightly deviating from the true model are used to show the developed method's statistical efficacy at the assumed stochastic model, its robustness against the deviations from the assumed stochastic model, and the validity of the estimated variance-covariance matrix no matter whether the assumed stochastic model is correct or not.

Four Novel Zn (II Coordination Polymers Based on 4′-Ferrocenyl-3,2′:6′,3′′-Terpyridine: Engineering a Switch from 1D Helical Polymer Chain to 2D Network by Coordination Anion Modulation

Directory of Open Access Journals (Sweden)

Lufei Xiao

2017-11-01

Full Text Available Four novel ZnII coordination polymers, [(ZnCl22(L2]n (1, [(ZnBr22(L2]n (2, and [(ZnI22(L2]n (3 and {[Zn(SCN2]1.5(L3}n (4, have been synthesized based on 4′-ferrocenyl-3,2′:6′,3′′-terpyridine with ZnII ions and different coordination anions under similar ambient conditions. Their structures have been confirmed using single crystal X-ray diffraction analysis, showing that complexes 1–3 are one-dimensional (1D double-stranded metal ion helical polymer chains and complex 4 is of a two-dimensional (2D network. The structural transformations of them from a 1D polymer chain to a 2D network under the influence of the coordination anions has been systematic investigated. Furthermore, the optical band gaps have been measured by optical diffuse reflectance spectroscopy, revealing that the ligand and the complexes should have semiconductor properties.

State borders in ETRS89 coordinates – reality or fiction ?

Directory of Open Access Journals (Sweden)

Jiří Poláček

2015-12-01

Full Text Available Common unique ETRS89 coordinates of the state boundaries are crucial for cross-border data harmonization for international projects. In the frame of European Location Framework (ELF project Czech Office for Surveying, Mapping and Cadastre (ČÚZK cooperates with Poland on egde-matching on the state border. During the preliminary phase of the project was some difficulty identified. If the state boundary is measured and administered in the national coordinate system, the accuracy of the transformation into the ETRS89 is influenced by discrepancies of the local trigonometric network, which results in two slightly different state boundaries. Final solution for Europe – international treaties on the state borders based on the ETRS89 coordinates – is necessary, but it will take years.

Supramolecule-to-supramolecule transformations of coordination-driven self-assembled polygons.

Science.gov (United States)

Zhao, Liang; Northrop, Brian H; Stang, Peter J

2008-09-10

Two types of supramolecular transformations, wherein a self-assembled Pt(II)-pyridyl metal-organic polygon is controllably converted into an alternative polygon, have been achieved through the reaction between cobalt carbonyl and the acetylene moiety of a dipyridyl donor ligand. A [6 + 6] hexagon is transformed into two [3 + 3] hexagons, and a triangle-square mixture is converted into [2 + 2] rhomboids. 1H and 31P NMR spectra are used to track the transformation process and evaluate the yield of new self-assembled polygons. Such transformed species are identified by electrospray ionization (ESI) mass spectrometry. This new kind of supramolecule-to-supramolecule transformations provides a viable means for constructing, and then converting, new self-assembled polygons.

Conversion of Hanford site well locations to Washington coordinate system of 1983, South Zone 1991 (WCS83S)

International Nuclear Information System (INIS)

Burnett, R.A.; Tzemos, S.; Dietz, L.A.

1993-12-01

Past construction and survey practices have resulted in the use of multiple local coordinate systems for measuring and reporting the horizontal position of wells and other facilities and locations on the Hanford Site. This report describes the development of a coordinate transformation process and algorithm and its application to the conversion of the horizontal coordinates of Hanford site wells from the various local coordinate systems and datums to a single standard coordinate system, the Washington Coordinate system of 1983, South Zone 1991 (WCS83S). The coordinate transformation algorithm, implemented as a computer program called CTRANS, uses standard two-dimensional translation, rotation, and scaling transformation equations and can be applied to any set of horizontal point locations. For each point to be transformed, the coefficients of the transformation equations are calculated locally, using the coordinates of the three nearest registration points (points with known locations in both coordinate systems). The report contains a discussion of efforts to verify and validate both the software and the well location data, a description of the methods used to estimate transformation and registration point accuracy, instructions for using the computer program, and a summary of the Hanford well conversion results for each local coordinate system and datum. Also included are the results of using recent U.S. Army Corps of Engineers survey data to obtain estimated measures of location errors in wells for which the local coordinate data source is undocumented, unverified, and therefore of unknown accuracy

Pullback Transformations in Gyrokinetic Theory

International Nuclear Information System (INIS)

Qin, H.; Tang, W.M.

2003-01-01

The Pullback transformation of the distribution function is a key component of the gyrokinetic theory. In this paper, a systematic treatment of this subject is presented, and results from applications of the uniform framework developed are reviewed. The focus is on providing a clear exposition of the basic formalism which arises from the existence of three distinct coordinate systems in gyrokinetic theory. The familiar gyrocenter coordinate system, where the gyromotion is decoupled from the rest of particle's dynamics, is non-canonical and non-fabric. On the other hand, Maxwell's equations, which are needed to complete a kinetic system, are initially only defined in the fabric laboratory phase space coordinate system. The pullback transformations provide a rigorous connection between the distribution functions in gyrocenter coordinates and Maxwell's equations in laboratory phase space coordinates. This involves the generalization of the usual moment integrals originally defined on the cotangent fiber of the phase space to the moment integrals on a general 6D symplectic manifold, is shown to be an important step in the proper formulation of gyrokinetic theory. The resultant systematic treatment of the moment integrals enabled by the pullback transformation. Without this vital element, a number of prominent physics features, such as the presence of the compressional Alfven wave and a proper description of the gyrokinetic equilibrium, cannot be readily recovered

Higher derivatives in gauge transformations

International Nuclear Information System (INIS)

Gogilidze, S.A.; Sanadze, V.V.; Tkebuchava, F.G.

1992-01-01

The mechanism of appearance of highher derivatives of coordinates in the symmetry transformation law of the second Noether's theorem is established. It is shown that the corresponding transformations are canonical in the extended phase space. 15 refs

The shallow water equations in Lagrangian coordinates

International Nuclear Information System (INIS)

Mead, J.L.

2004-01-01

Recent advances in the collection of Lagrangian data from the ocean and results about the well-posedness of the primitive equations have led to a renewed interest in solving flow equations in Lagrangian coordinates. We do not take the view that solving in Lagrangian coordinates equates to solving on a moving grid that can become twisted or distorted. Rather, the grid in Lagrangian coordinates represents the initial position of particles, and it does not change with time. We apply numerical methods traditionally used to solve differential equations in Eulerian coordinates, to solve the shallow water equations in Lagrangian coordinates. The difficulty with solving in Lagrangian coordinates is that the transformation from Eulerian coordinates results in solving a highly nonlinear partial differential equation. The non-linearity is mainly due to the Jacobian of the coordinate transformation, which is a precise record of how the particles are rotated and stretched. The inverse Jacobian must be calculated, thus Lagrangian coordinates cannot be used in instances where the Jacobian vanishes. For linear (spatial) flows we give an explicit formula for the Jacobian and describe the two situations where the Lagrangian shallow water equations cannot be used because either the Jacobian vanishes or the shallow water assumption is violated. We also prove that linear (in space) steady state solutions of the Lagrangian shallow water equations have Jacobian equal to one. In the situations where the shallow water equations can be solved in Lagrangian coordinates, accurate numerical solutions are found with finite differences, the Chebyshev pseudospectral method, and the fourth order Runge-Kutta method. The numerical results shown here emphasize the need for high order temporal approximations for long time integrations

COORDINATE-BASED META-ANALYTIC SEARCH FOR THE SPM NEUROIMAGING PIPELINE

DEFF Research Database (Denmark)

Wilkowski, Bartlomiej; Szewczyk, Marcin; Rasmussen, Peter Mondrup

2009-01-01

. BredeQuery offers a direct link from SPM5 to the Brede Database coordinate-based search engine. BredeQuery is able to ‘grab’ brain location coordinates from the SPM windows and enter them as a query for the Brede Database. Moreover, results of the query can be displayed in an SPM window and/or exported...

A Coordinate-Based Proof of the Scallop Theorem

OpenAIRE

Ishimoto, Kenta; Yamada, Michio

2012-01-01

We reconsider fluid dynamics for a self-propulsive swimmer in Stokes flow. With an exact definition of deformation of a swimmer, a coordinate-based proof is first given to Purcell's scallop theorem including the body rotation.

Multilayer modal actuator-based piezoelectric transformers.

Science.gov (United States)

Huang, Yao-Tien; Wu, Wen-Jong; Wang, Yen-Chieh; Lee, Chih-Kung

2007-02-01

An innovative, multilayer piezoelectric transformer equipped with a full modal filtering input electrode is reported herein. This modal-shaped electrode, based on the orthogonal property of structural vibration modes, is characterized by full modal filtering to ensure that only the desired vibration mode is excited during operation. The newly developed piezoelectric transformer is comprised of three layers: a multilayered input layer, an insulation layer, and a single output layer. The electrode shape of the input layer is derived from its structural vibration modal shape, which takes advantage of the orthogonal property of the vibration modes to achieve a full modal filtering effect. The insulation layer possesses two functions: first, to couple the mechanical vibration energy between the input and output, and second, to provide electrical insulation between the two layers. To meet the two functions, a low temperature, co-fired ceramic (LTCC) was used to provide the high mechanical rigidity and high electrical insulation. It can be shown that this newly developed piezoelectric transformer has the advantage of possessing a more efficient energy transfer and a wider optimal working frequency range when compared to traditional piezoelectric transformers. A multilayer piezoelectric, transformer-based inverter applicable for use in LCD monitors or portable displays is presented as well.

On the multivariate total least-squares approach to empirical coordinate transformations. Three algorithms

Science.gov (United States)

Schaffrin, Burkhard; Felus, Yaron A.

2008-06-01

The multivariate total least-squares (MTLS) approach aims at estimating a matrix of parameters, Ξ, from a linear model ( Y- E Y = ( X- E X ) · Ξ) that includes an observation matrix, Y, another observation matrix, X, and matrices of randomly distributed errors, E Y and E X . Two special cases of the MTLS approach include the standard multivariate least-squares approach where only the observation matrix, Y, is perturbed by random errors and, on the other hand, the data least-squares approach where only the coefficient matrix X is affected by random errors. In a previous contribution, the authors derived an iterative algorithm to solve the MTLS problem by using the nonlinear Euler-Lagrange conditions. In this contribution, new lemmas are developed to analyze the iterative algorithm, modify it, and compare it with a new ‘closed form’ solution that is based on the singular-value decomposition. For an application, the total least-squares approach is used to estimate the affine transformation parameters that convert cadastral data from the old to the new Israeli datum. Technical aspects of this approach, such as scaling the data and fixing the columns in the coefficient matrix are investigated. This case study illuminates the issue of “symmetry” in the treatment of two sets of coordinates for identical point fields, a topic that had already been emphasized by Teunissen (1989, Festschrift to Torben Krarup, Geodetic Institute Bull no. 58, Copenhagen, Denmark, pp 335-342). The differences between the standard least-squares and the TLS approach are analyzed in terms of the estimated variance component and a first-order approximation of the dispersion matrix of the estimated parameters.

Simultaneous Helmert transformations among multiple frames considering all relevant measurements

Science.gov (United States)

Chang, Guobin; Lin, Peng; Bian, Hefang; Gao, Jingxiang

2018-03-01

Helmert or similarity models are widely employed to relate different coordinate frames. It is often encountered in practice to transform coordinates from more than one old frame into a new one. One may perform separate Helmert transformations for each old frame. However, although each transformation is locally optimal, this is not globally optimal. Transformations among three frames, namely one new and two old, are studied as an example. Simultaneous Helmert transformations among all frames are also studied. Least-squares estimation of the transformation parameters and the coordinates in the new frame of all stations involved is performed. A functional model for the transformations among multiple frames is developed. A realistic stochastic model is followed, in which not only non-common stations are taken into consideration, but also errors in all measurements are addressed. An algorithm of iterative linearizations and estimations is derived in detail. The proposed method is globally optimal, and, perhaps more importantly, it produces a unified network of the new frame providing coordinate estimates for all involved stations and the associated covariance matrix, with the latter being consistent with the true errors of the former. Simulations are conducted, and the results validate the superiority of the proposed combined method over separate approaches.

Two-coordinate scintillation hodoscope based on hodoscopical photomultipliers

International Nuclear Information System (INIS)

Vishnevskij, N.K.; Ronzhin, A.I.; Semenov, V.K.; Khachaturov, B.A.

1982-01-01

The results of investigations of scintillation hodoscope on the basis of hodoscopic photomultipliers (HPM) for simultaneous measuring two coordinates (x and y) of a particle. The hodoscope consists of scintillation electrodes bent at the angle of 135 deg C and made an angle of 90 deg with each other. For measuring X-coordinate the half part of the photocathode is used, the second part is used for measuring Y-coordinate. HPM provides for simultaneous measuring two coordinates of a particle in the working region of 90 mm at using the photocathode with 180 mm long working region along the photocathode. The discrete separation of neighbouring positions in relation to the photocathode is possible at the minimum size of scintillation electrode being equil to >= 2 mm. For suppression of multiparticle background at the information output from the hodoscope as well as for simultaneous observation at the amplitude analyser of spectra of reference signals or X and Y profiles a fast processor cicuit has been developed. High detecting efficiency (about 90%) and low background level have been observed at the processor operation where the presence only of one signal in each of X- or Y projections is required. The two-coordinate hodoscope based on HPM due to its compactness and mobility may be used for expedient and precision beam guidance onto a target, its position control, shape and dimensions directly in the region of a polarized target location

Porous coordination polymer with flexibility imparted by coordinatively changeable lithium ions on the pore surface.

Science.gov (United States)

Xie, Lin-Hua; Lin, Jian-Bin; Liu, Xiao-Min; Wang, Yu; Zhang, Wei-Xiong; Zhang, Jie-Peng; Chen, Xiao-Ming

2010-02-01

Solvothermal reactions of equimolar zinc acetate, lithium acetate, and 1,3,5-benzenetricarboxylic acid (H(3)btc) in different mixed solvents yielded isostructural three-dimensional frameworks [LiZn(btc)(cG)].lG [cG and lG denote coordinated and lattice guests, respectively; cG = (nmp)(0.5)(H(2)O)(0.5), lG = (EtOH)(0.5) (1a); cG = H(2)O, lG = EtOH (1b); nmp = N-methyl-2-pyrrolidone] with one-dimensional channels occupied by guest molecules and solvent-coordinated, extrusive Li(+) ions. Thermogravimetry analyses and powder X-ray diffraction measurements revealed that both 1a and 1b can lose all lattice and coordinated guests to form a desolvated phase [LiZn(btc)] (MCF-27, 1) and almost retains the original framework structure. Gas adsorption measurements on 1 confirmed its permanent porosity but suggested a structural transformation from 1a/1b to 1. It is noteworthy that only 1a can undergo a single-crystal to single-crystal (SCSC) transformation into 1 upon desolvation. The crystal structure of 1 revealed that the Li(+) ions were retracted into the channel walls via complementary coordination to the carboxylate oxygen atoms in the framework rather than being exposed on the pore surface. Single-crystal X-ray diffraction analyses were also performed for N(2)- and CO(2)-loaded samples of 1, revealing that the framework remained unchanged when the gases were adsorbed. Although the gas molecules could not be modeled, the residue electrons inside the channels demonstrated that the retracted Li(+) ions still behave as the primary interacting site for CO(2) molecules. Nevertheless, solvent molecules such as H(2)O can readily compete with the framework oxygen atom to retrieve the extrusive Li(+) ions, accompanying the reverse structural transformation, i.e., from 1 to 1a/1b.

Coordinated SLNR based Precoding in Large-Scale Heterogeneous Networks

KAUST Repository

Boukhedimi, Ikram

2017-03-06

This work focuses on the downlink of large-scale two-tier heterogeneous networks composed of a macro-cell overlaid by micro-cell networks. Our interest is on the design of coordinated beamforming techniques that allow to mitigate the inter-cell interference. Particularly, we consider the case in which the coordinating base stations (BSs) have imperfect knowledge of the channel state information. Under this setting, we propose a regularized SLNR based precoding design in which the regularization factor is used to allow better resilience with respect to the channel estimation errors. Based on tools from random matrix theory, we provide an analytical analysis of the SINR and SLNR performances. These results are then exploited to propose a proper setting of the regularization factor. Simulation results are finally provided in order to validate our findings and to confirm the performance of the proposed precoding scheme.

Coordinated SLNR based Precoding in Large-Scale Heterogeneous Networks

KAUST Repository

Boukhedimi, Ikram; Kammoun, Abla; Alouini, Mohamed-Slim

2017-01-01

This work focuses on the downlink of large-scale two-tier heterogeneous networks composed of a macro-cell overlaid by micro-cell networks. Our interest is on the design of coordinated beamforming techniques that allow to mitigate the inter-cell interference. Particularly, we consider the case in which the coordinating base stations (BSs) have imperfect knowledge of the channel state information. Under this setting, we propose a regularized SLNR based precoding design in which the regularization factor is used to allow better resilience with respect to the channel estimation errors. Based on tools from random matrix theory, we provide an analytical analysis of the SINR and SLNR performances. These results are then exploited to propose a proper setting of the regularization factor. Simulation results are finally provided in order to validate our findings and to confirm the performance of the proposed precoding scheme.

Tolerance-Based Feature Transforms

NARCIS (Netherlands)

Reniers, Dennie; Telea, Alexandru

2007-01-01

Tolerance-based feature transforms (TFTs) assign to each pixel in an image not only the nearest feature pixels on the boundary (origins), but all origins from the minimum distance up to a user-defined tolerance. In this paper, we compare four simple-to-implement methods for computing TFTs on binary

Program Transformation to Identify List-Based Parallel Skeletons

Directory of Open Access Journals (Sweden)

Venkatesh Kannan

2016-07-01

Full Text Available Algorithmic skeletons are used as building-blocks to ease the task of parallel programming by abstracting the details of parallel implementation from the developer. Most existing libraries provide implementations of skeletons that are defined over flat data types such as lists or arrays. However, skeleton-based parallel programming is still very challenging as it requires intricate analysis of the underlying algorithm and often uses inefficient intermediate data structures. Further, the algorithmic structure of a given program may not match those of list-based skeletons. In this paper, we present a method to automatically transform any given program to one that is defined over a list and is more likely to contain instances of list-based skeletons. This facilitates the parallel execution of a transformed program using existing implementations of list-based parallel skeletons. Further, by using an existing transformation called distillation in conjunction with our method, we produce transformed programs that contain fewer inefficient intermediate data structures.

Behavioral Own-Body-Transformations in Children and Adolescents With Typical Development, Autism Spectrum Disorder, and Developmental Coordination Disorder

Directory of Open Access Journals (Sweden)

Soizic Gauthier

2018-05-01

Full Text Available Background: In motor imitation, taking a partner's perspective often involves a mental body transformation from an embodied, ego-centered viewpoint to a disembodied, hetero-centered viewpoint. Impairments of both own-body-transformation (OBT and abnormalities in visual-spatial processing have been reported in patients with neurodevelopmental disorders including autism spectrum disorder (ASD. In the context of a visual-motor interactive task, studying OBT impairments while disentangling the contribution of visual-spatial impairments associated with motor coordination problems has not been investigated.Methods: 85 children and adolescents (39 controls with typical development, TD; 29 patients with ASD; 17 patients with developmental coordination disorder, DCD, aged 6–19 years, participated in a behavioral paradigm in which participants interacted with a virtual tightrope walker (TW standing and moving with him. The protocol enables to distinguish ego-centered and hetero-centered perspectives.Results: We show that (1 OBT was possible but difficult for children with neurodevelopmental disorders, as well as for TD children, when the task required the participant to perform a mental rotation in order to adopt a hetero-centered perspective. (2 Using multivariate models, hetero-centered perspective score was significantly associated with age, TW orientation, latency, and diagnosis. ASD and TD groups' performances were close and significantly correlated with age. However, it was not the case for DCD, since this group was specifically handicapped by visual-spatial impairments. (3 ASD and DCD did not perform similarly: motor performance as shown by movement amplitude was better in DCD than ASD. ASD motor response was more ambiguous and hardly readable.Conclusion: Changing perspective in a spatial environment is possible for patients with ASD although delayed compared with TD children. In patients with DCD, their visual-spatial impairments negatively

Relativistic effects in a rotating coordinate system

International Nuclear Information System (INIS)

Chugreev, Y.V.

1989-01-01

The general approach to calculating various physical effects in a rotating, noninertial reference frame based on the tetrad formalism for observables is discussed. It is shown that the method based on the search for the ''true'' coordinate transformation from an inertial to the rotating frame is ill-founded. Most special relativistic effects in a rotating frame have been calculated without any nonrelativistic restrictions. It is shown how simple physical experiments can be used to determine whether a circle is at rest in the equatorial plane of a Kerr--Newman gravitational source in the relativistic theory of gravity or is rotating about an axis through its center

Three coordination compounds based on benzene tetracarboxylate ...

Indian Academy of Sciences (India)

YUNLONG WU

nescence, considerable attention has been focused on the construction of coordination .... measurements were performed on ground powder samples at .... Figure 2. (a) Coordination environment of Co1 ion in compound 2. (b) Coordination.

Elites in Switzerland: the rise and fall of a model of elite coordination

Directory of Open Access Journals (Sweden)

Felix Bühlmann

Full Text Available Abstract The aim of this article is to understand the recent transformations of Swiss elites. Based on a database of political, economic and administrative elites covering the whole twentieth century, we investigate the social background, education and coordination mechanisms of Swiss elites. We find that for a long time, they maintained their power through a combination of a socially narrow recruitment and a coordination model including the army as meeting place, a corporatist organisation of the economy and multipositionality between political and economic fields. As a result of the increasing internationalisation of managers of Swiss firms, this model of elite coordination has eroded since the 1990s and led to a (relatively unpredictable transition phase.

VARIABILITY OF COORDINATION COMPLEXES OF COPPER ACCUMULATED WITHIN FUNGAL COLONY IN THE PRESENCE OF COPPER-CONTAINING MINERALS

Directory of Open Access Journals (Sweden)

M. O. Fomina

2014-04-01

Full Text Available The aim of work was to elucidate the mechanisms of bioaccumulation of copper leached from minerals by fungus Aspergillus niger with great bioremedial potential due to its ability to produce chelating metabolites and transform toxic metals and minerals. The special attention was paid to the chemical speciation of copper bioaccumulated within fungal colony in the process of fungal transformation of copper-containing minerals. Chemical speciation of copper within different parts of the fungal colony was studied using solid-state chemistry methods such as synchrotron-based X-ray absorption spectroscopy providing information about the oxidation state of the target element, and its coordination environment. The analysis of the obtained X-ray absorption spectroscopy spectra was carried out using Fourier transforms of Extended X-ray Absorption Fine Structure regions, which correspond to the oscillating part of the spectrum to the right of the absorption edge. Results of this study showed that fungus A. niger was involved in the process of solubilization of copper-containing minerals resulted in leaching of mobile copper and its further immobilization by fungal biomass with variable coordination of accumulated copper within fungal colony which depended on the age and physiological/reproductive state of fungal mycelium. X-ray absorption spectroscopy data demonstrated that copper accumulated within outer zone of fungal colony with immature vegetative mycelium was coordinated with sulphur–containing ligands, in contrast to copper coordination with phosphate ligands within mature mycelium with profuse conidia in the central zone of the colony. The findings of this study not only broaden our understanding of the biogeochemical role of fungi but can also be used in the development of various fungal-based biometallurgy technologies such as bioremediation, bioaccumulation and bioleaching and in the assessment of their reliability. The main conclusion is that

Research and simulation of the decoupling transformation in AC motor vector control

Science.gov (United States)

He, Jiaojiao; Zhao, Zhongjie; Liu, Ken; Zhang, Yongping; Yao, Tuozhong

2018-04-01

Permanent magnet synchronous motor (PMSM) is a nonlinear, strong coupling, multivariable complex object, and transformation decoupling can solve the coupling problem of permanent magnet synchronous motor. This paper gives a permanent magnet synchronous motor (PMSM) mathematical model, introduces the permanent magnet synchronous motor vector control coordinate transformation in the process of modal matrix inductance matrix transform through the matrix related knowledge of different coordinates of diagonalization, which makes the coupling between the independent, realize the control of motor current and excitation the torque current coupling separation, and derived the coordinate transformation matrix, the thought to solve the coupling problem of AC motor. Finally, in the Matlab/Simulink environment, through the establishment and combination between the PMSM ontology, coordinate conversion module, built the simulation model of permanent magnet synchronous motor vector control, introduces the model of each part, and analyzed the simulation results.

Zero-Axis Virtual Synchronous Coordinate Based Current Control Strategy for Grid-Connected Inverter

Directory of Open Access Journals (Sweden)

Longyue Yang

2018-05-01

Full Text Available Unbalanced power has a great influence on the safe and stable operation of the distribution network system. The static power compensator, which is essentially a grid-connected inverter, is an effective solution to the three-phase power imbalance problem. In order to solve the tracking error problem of zero-sequence AC current signals, a novel control strategy based on zero-axis virtual synchronous coordinates is proposed in this paper. By configuring the operation of filter transmission matrices, a specific orthogonal signal is obtained for zero-axis reconstruction. In addition, a controller design scheme based on this method is proposed. Compared with the traditional zero-axis direct control, this control strategy is equivalent to adding a frequency tuning module by the orthogonal signal generator. The control gain of an open loop system can be equivalently promoted through linear transformation. With its clear mathematical meaning, zero- sequence current control can be controlled with only a first-order linear controller. Through reasonable parameter design, zero steady-state error, fast response and strong stability can be achieved. Finally, the performance of the proposed control strategy is verified by both simulations and experiments.

Rule-based modularization in model transformation languages illustrated with ATL

NARCIS (Netherlands)

Ivanov, Ivan; van den Berg, Klaas; Jouault, Frédéric

2007-01-01

This paper studies ways for modularizing transformation definitions in current rule-based model transformation languages. Two scenarios are shown in which the modular units are identified on the basis of relations between source and target metamodels and on the base of generic transformation

Improving the cooling performance of electrical distribution transformer using transformer oil – Based MEPCM suspension

OpenAIRE

Mushtaq Ismael Hasan

2017-01-01

In this paper the electrical distribution transformer has been studied numerically and the effect of outside temperature on its cooling performance has been investigated. The temperature range studied covers the hot climate regions. 250 KVA distribution transformer is chosen as a study model. A novel cooling fluid is proposed to improve the cooling performance of this transformer, transformer oil-based microencapsulated phase change materials suspension is used with volume concentration (5–25...

A Multi-agent Supply Chain Information Coordination Mode Based on Cloud Computing

OpenAIRE

Wuxue Jiang; Jing Zhang; Junhuai Li

2013-01-01

 In order to improve the high efficiency and security of supply chain information coordination under cloud computing environment, this paper proposes a supply chain information coordination mode based on cloud computing. This mode has two basic statuses which are online status and offline status. At the online status, cloud computing center is responsible for coordinating the whole supply chain information. At the offline status, information exchange can be realized among different nodes by u...

Fermi Coordinates of an Observer Moving in a Circle in Minkowski Space: Apparent Behavior of Clocks

National Research Council Canada - National Science Library

Bahder, Thomas

2000-01-01

Space-time coordinate transformations valid for arbitrarily long coordinate time are derived from global Minkowski coordinates to the Fermi coordinates of an observer moving in a circle in three-dimensional space...

Formulation of the rotational transformation of wave fields and their application to digital holography.

Science.gov (United States)

Matsushima, Kyoji

2008-07-01

Rotational transformation based on coordinate rotation in Fourier space is a useful technique for simulating wave field propagation between nonparallel planes. This technique is characterized by fast computation because the transformation only requires executing a fast Fourier transform twice and a single interpolation. It is proved that the formula of the rotational transformation mathematically satisfies the Helmholtz equation. Moreover, to verify the formulation and its usefulness in wave optics, it is also demonstrated that the transformation makes it possible to reconstruct an image on arbitrarily tilted planes from a wave field captured experimentally by using digital holography.

Tail modeling in a stretched magnetosphere 1. Methods and transformations

International Nuclear Information System (INIS)

Stern, D.P.

1987-01-01

A new method is developed for representing the magnetospheric field B as a distorted dipole field. Because delxB = 0 must be maintained,such a distortion may be viewed as a transformation of the vector potential A. The simplest form is a one-dimensional ''stretch transformation'' along the x axis, a generalization of a method introduced by Voigt. The transformation is concisely represented by the ''stretch function'' f(x), which is also a convenient tool for representing features of the substorm cycle. Onedimensional stretch transformations are extended to spherical, cylindrical, and parabolic coordinates and then to arbitrary coordinates. It is next shown that distortion transformations can be viewed as mappings of field lines from one pattern to another: Euler potentials are used in the derivation, but the final result only requires knowledge of the field and not of the potentials. General transformations in Cartesian and arbitrary coordinates are then derived,and applications to field modeling, field line motion, MHD modeling, and incompressible fluid dynamics are considered. copyrightAmerican Geophysical Union 1987

Multiagent System-Based Distributed Coordinated Control for Radial DC Microgrid Considering Transmission Time Delays

DEFF Research Database (Denmark)

Dou, Chun-Xia; Yue, Dong; Guerrero, Josep M.

2017-01-01

This paper focuses on a multi-agent based distributed coordinated control for radial DC microgrid considering trans-mission time delays. Firstly, a two-level multi-agent system is constructed, where local control is formulated based on local states and executed by means of the first-level agent......, and dis-tributed coordinated control law is formulated based on wide-area information and executed by means of the secondary- level agent in order to improve the voltage control performances. Afterwards, the research mainly focuses on designing the local controller and the distributed coordinated...

Environmental transformations and ecological effects of iron-based nanoparticles.

Science.gov (United States)

Lei, Cheng; Sun, Yuqing; Tsang, Daniel C W; Lin, Daohui

2018-01-01

The increasing application of iron-based nanoparticles (NPs), especially high concentrations of zero-valent iron nanoparticles (nZVI), has raised concerns regarding their environmental behavior and potential ecological effects. In the environment, iron-based NPs undergo physical, chemical, and/or biological transformations as influenced by environmental factors such as pH, ions, dissolved oxygen, natural organic matter (NOM), and biotas. This review presents recent research advances on environmental transformations of iron-based NPs, and articulates their relationships with the observed toxicities. The type and extent of physical, chemical, and biological transformations, including aggregation, oxidation, and bio-reduction, depend on the properties of NPs and the receiving environment. Toxicities of iron-based NPs to bacteria, algae, fish, and plants are increasingly observed, which are evaluated with a particular focus on the underlying mechanisms. The toxicity of iron-based NPs is a function of their properties, tolerance of test organisms, and environmental conditions. Oxidative stress induced by reactive oxygen species is considered as the primary toxic mechanism of iron-based NPs. Factors influencing the toxicity of iron-based NPs are addressed and environmental transformations play a significant role, for example, surface oxidation or coating by NOM generally lowers the toxicity of nZVI. Research gaps and future directions are suggested with an aim to boost concerted research efforts on environmental transformations and toxicity of iron-based NPs, e.g., toxicity studies of transformed NPs in field, expansion of toxicity endpoints, and roles of laden contaminants and surface coating. This review will enhance our understanding of potential risks of iron-based NPs and proper uses of environmentally benign NPs. Copyright © 2017 Elsevier Ltd. All rights reserved.

Glass formation via structural fragmentation of a 2D coordination network.

Science.gov (United States)

Umeyama, D; Funnell, N P; Cliffe, M J; Hill, J A; Goodwin, A L; Hijikata, Y; Itakura, T; Okubo, T; Horike, S; Kitagawa, S

2015-08-18

The structure of a glass obtained by the melt quenching of a two-dimensional (2D) coordination network was examined. X-ray analyses disclosed a 2D-to-0D structural transformation before and after glass formation. The mechanism is unique to coordination compounds, as it is characterized by labile and flexible coordination bonds.

Poisson Coordinates.

Science.gov (United States)

Li, Xian-Ying; Hu, Shi-Min

2013-02-01

Harmonic functions are the critical points of a Dirichlet energy functional, the linear projections of conformal maps. They play an important role in computer graphics, particularly for gradient-domain image processing and shape-preserving geometric computation. We propose Poisson coordinates, a novel transfinite interpolation scheme based on the Poisson integral formula, as a rapid way to estimate a harmonic function on a certain domain with desired boundary values. Poisson coordinates are an extension of the Mean Value coordinates (MVCs) which inherit their linear precision, smoothness, and kernel positivity. We give explicit formulas for Poisson coordinates in both continuous and 2D discrete forms. Superior to MVCs, Poisson coordinates are proved to be pseudoharmonic (i.e., they reproduce harmonic functions on n-dimensional balls). Our experimental results show that Poisson coordinates have lower Dirichlet energies than MVCs on a number of typical 2D domains (particularly convex domains). As well as presenting a formula, our approach provides useful insights for further studies on coordinates-based interpolation and fast estimation of harmonic functions.

Agent-Based Coordination Model for Designing Transportation Applications

OpenAIRE

BADEIG, F; BALBO, F; SCEMAMA, G; ZARGAYOUNA, M

2008-01-01

This paper presents an environment-centered approach to design multi-agent solutions to transportation problems. Based on the Property-based Coordination Principle (PbC), the objective of our approach is to solve three recurrent issues in the design of these solutions: the knowledge problem, the space-time dimension and the dynamics of the real environment. To demonstrate the benefits of our approach, two completely different applications, a demand-responsive transportation system and a simul...

Multispectral image pansharpening based on the contourlet transform

Energy Technology Data Exchange (ETDEWEB)

Amro, Israa; Mateos, Javier, E-mail: iamro@correo.ugr.e, E-mail: jmd@decsai.ugr.e [Departamento de Ciencias de la Computacion e I.A., Universidad de Granada, 18071 Granada (Spain)

2010-02-01

Pansharpening is a technique that fuses the information of a low resolution multispectral image (MS) and a high resolution panchromatic image (PAN), usually remote sensing images, to provide a high resolution multispectral image. In the literature, this task has been addressed from different points of view being one of the most popular the wavelets based algorithms. Recently, the contourlet transform has been proposed. This transform combines the advantages of the wavelets transform with a more efficient directional information representation. In this paper we propose a new pansharpening method based on contourlets, compare with its wavelet counterpart and assess its performance numerically and visually.

An Integrated Model of Co-ordinated Community-Based Care.

Science.gov (United States)

Scharlach, Andrew E; Graham, Carrie L; Berridge, Clara

2015-08-01

Co-ordinated approaches to community-based care are a central component of current and proposed efforts to help vulnerable older adults obtain needed services and supports and reduce unnecessary use of health care resources. This study examines ElderHelp Concierge Club, an integrated community-based care model that includes comprehensive personal and environmental assessment, multilevel care co-ordination, a mix of professional and volunteer service providers, and a capitated, income-adjusted fee model. Evaluation includes a retrospective study (n = 96) of service use and perceived program impact, and a prospective study (n = 21) of changes in participant physical and social well-being and health services utilization. Over the period of this study, participants showed greater mobility, greater ability to meet household needs, greater access to health care, reduced social isolation, reduced home hazards, fewer falls, and greater perceived ability to obtain assistance needed to age in place. This study provides preliminary evidence that an integrated multilevel care co-ordination approach may be an effective and efficient model for serving vulnerable community-based elders, especially low and moderate-income elders who otherwise could not afford the cost of care. The findings suggest the need for multisite controlled studies to more rigorously evaluate program impacts and the optimal mix of various program components. © The Author 2014. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Multi-layer thickness determination using differential-based enhanced Fourier transforms of X-ray reflectivity data

Energy Technology Data Exchange (ETDEWEB)

Poust, Benjamin [Department of Materials Science and Engineering, University of California, Los Angeles, CA (United States); Northrop Grumman Space Technology, Redondo Beach, CA (United States); Sandhu, Rajinder [Northrop Grumman Space Technology, Redondo Beach, CA (United States); Goorsky, Mark [Department of Materials Science and Engineering, University of California, Los Angeles, CA (United States)

2009-08-15

Layer thickness determination of single and multi-layer structures is achieved using a new method for generating Fourier transforms (FTs) of X-ray reflectivity data. This enhanced Fourier analysis is compared to other techniques in the determination of AlN layer thickness deposited on sapphire. In addition to demonstrably improved results, the results also agree with thicknesses determined using simulations and TEM measurements. The effectiveness of the technique is further demonstrated using the more complicated metamorphic epitaxial multi-layer AlSb/InAs structures deposited on GaAs. The approach reported here is based upon differentiating the specular intensity with respect to the vertical reciprocal space coordinate Q{sub Z}. In general, differentiation is far more effective at removing the sloping background present in reflectivity scans than logarithmic compression alone, average subtraction alone, or other methods. When combined with any of the other enhancement techniques, however, differentiation yields distinguishable discrete Fourier transform (DFT) power spectrum peaks for even the weakest and most truncated of sloping oscillations that are present in many reflectivity scans from multi-layer structures. (Abstract Copyright [2009], Wiley Periodicals, Inc.)

MEMS based digital transform spectrometers

Science.gov (United States)

Geller, Yariv; Ramani, Mouli

2005-09-01

Earlier this year, a new breed of Spectrometers based on Micro-Electro-Mechanical-System (MEMS) engines has been introduced to the commercial market. The use of these engines combined with transform mathematics, produces powerful spectrometers at unprecedented low cost in various spectral regions.

Iterative solution of the Grad-Shafranov equation in symmetric magnetic coordinates

International Nuclear Information System (INIS)

Brambilla, Marco

2003-01-01

The inverse Grad-Shafranov equation for axisymmetric magnetohydrodynamic equilibria is reformulated in symmetric magnetic coordinates (in which magnetic field lines look 'straight', and the geometric toroidal angle is one of the coordinates). The poloidally averaged part of the equilibrium condition and Ampere law takes the form of two first-order ordinary differential equations, with the two arbitrary flux functions, pressure and force-free part of the current density, as sources. The condition for the coordinates to be flux coordinates, and the poloidally varying part of the equilibrium equation are similarly transformed into a set of first-order ordinary differential equations, with coefficients depending on the metric, and explicitly solved for the radial derivatives of the coefficients of the Fourier representation of the Cartesian coordinates in the poloidal angle. The derivation exploits the existence of Boozer-White coordinates, but does not require to find these coordinates explicitly; on the other hand, it offers a simple recipe to perform the transformation to Boozer-White coordinates, if required. Use of symmetric flux coordinates is advantageous for the formulation of many problems of equilibrium, stability, and wave propagation in tokamak plasmas, since these coordinates have the simplest metric of their class. It is also shown that in symmetric flux coordinates the Lagrangian equations of the drift motion of charged particles are automatically solved for the time derivatives, with right-hand sides closely related to the coefficients of the inverse Grad-Shafranov equation

Stigmergy based behavioural coordination for satellite clusters

Science.gov (United States)

Tripp, Howard; Palmer, Phil

2010-04-01

Multi-platform swarm/cluster missions are an attractive prospect for improved science return as they provide a natural capability for temporal, spatial and signal separation with further engineering and economic advantages. As spacecraft numbers increase and/or the round-trip communications delay from Earth lengthens, the traditional "remote-control" approach begins to break down. It is therefore essential to push control into space; to make spacecraft more autonomous. An autonomous group of spacecraft requires coordination, but standard terrestrial paradigms such as negotiation, require high levels of inter-spacecraft communication, which is nontrivial in space. This article therefore introduces the principals of stigmergy as a novel method for coordinating a cluster. Stigmergy is an agent-based, behavioural approach that allows for infrequent communication with decisions based on local information. Behaviours are selected dynamically using a genetic algorithm onboard. supervisors/ground stations occasionally adjust parameters and disseminate a "common environment" that is used for local decisions. After outlining the system, an analysis of some crucial parameters such as communications overhead and number of spacecraft is presented to demonstrate scalability. Further scenarios are considered to demonstrate the natural ability to deal with dynamic situations such as the failure of spacecraft, changing mission objectives and responding to sudden bursts of high priority tasks.

Proton exchange in acid–base complexes induced by reaction coordinates with heavy atom motions

International Nuclear Information System (INIS)

Alavi, Saman; Taghikhani, Mahdi

2012-01-01

Highlights: ► Proton exchange in acid–base complexes is studied. ► The structures, binding energies, and normal mode vibrations are calculated. ► Transition state structures of proton exchange mechanism are determined. ► In the complexes studied, the reaction coordinate involves heavy atom rocking. ► The reaction coordinate is not simply localized in the proton movements. - Abstract: We extend previous work on nitric acid–ammonia and nitric acid–alkylamine complexes to illustrate that proton exchange reaction coordinates involve the rocking motion of the base moiety in many double hydrogen-bonded gas phase strong acid–strong base complexes. The complexes studied involve the biologically and atmospherically relevant glycine, formic, acetic, propionic, and sulfuric acids with ammonia/alkylamine bases. In these complexes, the magnitude of the imaginary frequencies associated with the proton exchange transition states are −1 . This contrasts with widely studied proton exchange reactions between symmetric carboxylic acid dimers or asymmetric DNA base pair and their analogs where the reaction coordinate is localized in proton motions and the magnitude of the imaginary frequencies for the transition states are >1100 cm −1 . Calculations on complexes of these acids with water are performed for comparison. Variations of normal vibration modes along the reaction coordinate in the complexes are described.

Vibrational quasi-degenerate perturbation theory with optimized coordinates: applications to ethylene and trans-1,3-butadiene.

Science.gov (United States)

Yagi, Kiyoshi; Otaki, Hiroki

2014-02-28

A perturbative extension to optimized coordinate vibrational self-consistent field (oc-VSCF) is proposed based on the quasi-degenerate perturbation theory (QDPT). A scheme to construct the degenerate space (P space) is developed, which incorporates degenerate configurations and alleviates the divergence of perturbative expansion due to localized coordinates in oc-VSCF (e.g., local O-H stretching modes of water). An efficient configuration selection scheme is also implemented, which screens out the Hamiltonian matrix element between the P space configuration (p) and the complementary Q space configuration (q) based on a difference in their quantum numbers (λpq = ∑s|ps - qs|). It is demonstrated that the second-order vibrational QDPT based on optimized coordinates (oc-VQDPT2) smoothly converges with respect to the order of the mode coupling, and outperforms the conventional one based on normal coordinates. Furthermore, an improved, fast algorithm is developed for optimizing the coordinates. First, the minimization of the VSCF energy is conducted in a restricted parameter space, in which only a portion of pairs of coordinates is selectively transformed. A rational index is devised for this purpose, which identifies the important coordinate pairs to mix from others that may remain unchanged based on the magnitude of harmonic coupling induced by the transformation. Second, a cubic force field (CFF) is employed in place of a quartic force field, which bypasses intensive procedures that arise due to the presence of the fourth-order force constants. It is found that oc-VSCF based on CFF together with the pair selection scheme yields the coordinates similar in character to the conventional ones such that the final vibrational energy is affected very little while gaining an order of magnitude acceleration. The proposed method is applied to ethylene and trans-1,3-butadiene. An accurate, multi-resolution potential, which combines the MP2 and coupled-cluster with singles

Vibrational quasi-degenerate perturbation theory with optimized coordinates: Applications to ethylene and trans-1,3-butadiene

Energy Technology Data Exchange (ETDEWEB)

Yagi, Kiyoshi, E-mail: kiyoshi.yagi@riken.jp; Otaki, Hiroki [Theoretical Molecular Science Laboratory, RIKEN, 2-1 Hirosawa, Wako, Saitama 351-0198 (Japan)

2014-02-28

A perturbative extension to optimized coordinate vibrational self-consistent field (oc-VSCF) is proposed based on the quasi-degenerate perturbation theory (QDPT). A scheme to construct the degenerate space (P space) is developed, which incorporates degenerate configurations and alleviates the divergence of perturbative expansion due to localized coordinates in oc-VSCF (e.g., local O–H stretching modes of water). An efficient configuration selection scheme is also implemented, which screens out the Hamiltonian matrix element between the P space configuration (p) and the complementary Q space configuration (q) based on a difference in their quantum numbers (λ{sub pq} = ∑{sub s}|p{sub s} − q{sub s}|). It is demonstrated that the second-order vibrational QDPT based on optimized coordinates (oc-VQDPT2) smoothly converges with respect to the order of the mode coupling, and outperforms the conventional one based on normal coordinates. Furthermore, an improved, fast algorithm is developed for optimizing the coordinates. First, the minimization of the VSCF energy is conducted in a restricted parameter space, in which only a portion of pairs of coordinates is selectively transformed. A rational index is devised for this purpose, which identifies the important coordinate pairs to mix from others that may remain unchanged based on the magnitude of harmonic coupling induced by the transformation. Second, a cubic force field (CFF) is employed in place of a quartic force field, which bypasses intensive procedures that arise due to the presence of the fourth-order force constants. It is found that oc-VSCF based on CFF together with the pair selection scheme yields the coordinates similar in character to the conventional ones such that the final vibrational energy is affected very little while gaining an order of magnitude acceleration. The proposed method is applied to ethylene and trans-1,3-butadiene. An accurate, multi-resolution potential, which combines the MP2 and

Plate-shaped transformation products in zirconium-base alloys

International Nuclear Information System (INIS)

Banerjee, S.; Dey, G.K.; Srivastava, D.

1997-01-01

Plate-shaped products resulting from martensitic, diffusional, and mixed mode transformations in zirconium-base alloys are compared in the present study. These alloys are particularly suitable for the comparison in view of the fact that the lattice correspondence between the parent β (bcc) and the product α (hcp) or γ-hydride (fct) phases are remarkably similar for different types of transformations. Crystallographic features such as orientation relations, habit planes, and interface structures associated with these transformations have been compared, with a view toward examining whether the transformation mechanisms have characteristic imprints on these experimental observables

Agrobacterium-Mediated Transformation of Leaf Base Segments.

Science.gov (United States)

Gasparis, Sebastian

2017-01-01

Agrobacterium-mediated transformation has become a routine method of genetic engineering of cereals, gradually replacing the biolistic protocols. Simple integration patterns of transgenic loci, decent transformation efficiency, and technical simplicity are the main advantages offered by this method. Here we present a detailed protocol for the production of transgenic oat plants by Agrobacterium-mediated transformation of leaf base segments. The use of leaf explants as target tissues for transformation and in vitro regeneration of transgenic plants may be a good alternative for genotypes which are not susceptible to regeneration from immature or mature embryos. We also describe the biochemical and molecular analysis procedures of the transgenic plants including a GUS histochemical assay, and Southern blot, both of which are optimized for application in oat.

Design Transformations for Rule-based Procedural Modeling

KAUST Repository

Lienhard, Stefan; Lau, Cheryl; Mü ller, Pascal; Wonka, Peter; Pauly, Mark

2017-01-01

We introduce design transformations for rule-based procedural models, e.g., for buildings and plants. Given two or more procedural designs, each specified by a grammar, a design transformation combines elements of the existing designs to generate new designs. We introduce two technical components to enable design transformations. First, we extend the concept of discrete rule switching to rule merging, leading to a very large shape space for combining procedural models. Second, we propose an algorithm to jointly derive two or more grammars, called grammar co-derivation. We demonstrate two applications of our work: we show that our framework leads to a larger variety of models than previous work, and we show fine-grained transformation sequences between two procedural models.

Design Transformations for Rule-based Procedural Modeling

KAUST Repository

Lienhard, Stefan

2017-05-24

We introduce design transformations for rule-based procedural models, e.g., for buildings and plants. Given two or more procedural designs, each specified by a grammar, a design transformation combines elements of the existing designs to generate new designs. We introduce two technical components to enable design transformations. First, we extend the concept of discrete rule switching to rule merging, leading to a very large shape space for combining procedural models. Second, we propose an algorithm to jointly derive two or more grammars, called grammar co-derivation. We demonstrate two applications of our work: we show that our framework leads to a larger variety of models than previous work, and we show fine-grained transformation sequences between two procedural models.

Renewable Energy for Electric Vehicles : Price Based Charging Coordination

NARCIS (Netherlands)

Richstein, J.C.; Schuller, A.; Dinther, C.; Ketter, W.; Weinhardt, C.

2012-01-01

In this paper we investigate the charging coordination of battery electric vehicles (BEV) with respect to the availability of intermittent renewable energy generation considering individual real world driving profiles in a deterministic simulation based analysis, mapping a part of the German power

A flexible and cost-effective compensation method for leveling using large-scale coordinate measuring machines and its application in aircraft digital assembly

Science.gov (United States)

Deng, Zhengping; Li, Shuanggao; Huang, Xiang

2018-06-01

In the assembly process of large-size aerospace products, the leveling and horizontal alignment of large components are essential prior to the installation of an inertial navigation system (INS) and the final quality inspection. In general, the inherent coordinate systems of large-scale coordinate measuring devices are not coincident with the geodetic horizontal system, and a dual-axis compensation system is commonly required for the measurement of difference in heights. These compensation systems are expensive and dedicated designs for different devices at present. Considering that a large-size assembly site usually needs more than one measuring device, a compensation approach which is versatile for different devices would be a more convenient and economic choice for manufacturers. In this paper, a flexible and cost-effective compensation method is proposed. Firstly, an auxiliary measuring device called a versatile compensation fixture (VCF) is designed, which mainly comprises reference points for coordinate transformation and a dual-axis inclinometer, and a kind of network tighten points (NTPs) are introduced and temporarily deployed in the large measuring space to further reduce transformation error. Secondly, the measuring principle of height difference is studied, based on coordinate transformation theory and trigonometry while considering the effects of earth curvature, and the coordinate transformation parameters are derived by least squares adjustment. Thirdly, the analytical solution of leveling uncertainty is analyzed, based on which the key parameters of the VCF and the proper deployment of NTPs are determined according to the leveling accuracy requirement. Furthermore, the proposed method is practically applied to the assembly of a large helicopter by developing an automatic leveling and alignment system. By measuring four NTPs, the leveling uncertainty (2σ) is reduced by 29.4% to about 0.12 mm, compared with that without NTPs.

A General Model of Sensitized Luminescence in Lanthanide-Based Coordination Polymers and Metal-Organic Framework Materials.

Science.gov (United States)

Einkauf, Jeffrey D; Clark, Jessica M; Paulive, Alec; Tanner, Garrett P; de Lill, Daniel T

2017-05-15

Luminescent lanthanides containing coordination polymers and metal-organic frameworks hold great potential in many applications due to their distinctive spectroscopic properties. While the ability to design coordination polymers for specific functions is often mentioned as a major benefit bestowed on these compounds, the lack of a meaningful understanding of the luminescence in lanthanide coordination polymers remains a significant challenge toward functional design. Currently, the study of these compounds is based on the antenna effect as derived from molecular systems, where organic antennae are used to facilitate lanthanide-centered luminescence. This molecular-based approach does not take into account the unique features of extended network solids, particularly the formation of band structure. While guidelines for the antenna effect are well established, they require modification before being applied to coordination polymers. A series of nine coordination polymers with varying topologies and organic linkers were studied to investigate the accuracy of the antenna effect in coordination polymer systems. By comparing a molecular-based approach to a band-based one, it was determined that the band structure that occurs in aggregated organic solids needs to be considered when evaluating the luminescence of lanthanide coordination polymers.

Secondary Coordinated Control of Islanded Microgrids Based on Consensus Algorithms

DEFF Research Database (Denmark)

Wu, Dan; Dragicevic, Tomislav; Vasquez, Juan Carlos

2014-01-01

systems. Nevertheless, the conventional decentralized secondary control, although does not need to be implemented in a microgrid central controller (MGCC), it has the limitation that all decentralized controllers must be mutually synchronized. In a clear cut contrast, the proposed secondary control......This paper proposes a decentralized secondary control for islanded microgrids based on consensus algorithms. In a microgrid, the secondary control is implemented in order to eliminate the frequency changes caused by the primary control when coordinating renewable energy sources and energy storage...... requires only a more simplified communication protocol and a sparse communication network. Moreover, the proposed approach based on dynamic consensus algorithms is able to achieve the coordinated secondary performance even when all units are initially out-of-synchronism. The control algorithm implemented...

Zernike Basis to Cartesian Transformations

Science.gov (United States)

Mathar, R. J.

2009-12-01

The radial polynomials of the 2D (circular) and 3D (spherical) Zernike functions are tabulated as powers of the radial distance. The reciprocal tabulation of powers of the radial distance in series of radial polynomials is also given, based on projections that take advantage of the orthogonality of the polynomials over the unit interval. They play a role in the expansion of products of the polynomials into sums, which is demonstrated by some examples. Multiplication of the polynomials by the angular bases (azimuth, polar angle) defines the Zernike functions, for which we derive transformations to and from the Cartesian coordinate system centered at the middle of the circle or sphere.

4D CAD Based Method for Supporting Coordination of Urban Subsurface Utility Projects

NARCIS (Netherlands)

olde Scholtenhuis, Léon Luc; Hartmann, T.; Doree, Andries G.

Coordinators of inner city utility construction works face increasing difficulty in managing their projects due to tight physical restrictions, strict deadlines and growing stakeholder fragmentation. This paper therefore presents a 4D CAD based coordination method that supports project plan scoping,

Reversible, high molecular weight palladium and platinum coordination polymers based on phosphorus ligands

NARCIS (Netherlands)

Paulusse, J.M.J.; Huijbers, J.P.J.; Sijbesma, R.P.

2005-01-01

A general strategy for the preparation and characterization of high molecular weight coordination polymers based on bifunctional phosphorus ligands and palladium or platinum dichloride is described. Metal-to-ligand stoichiometry is of key importance for the formation of linear coordination polymers

Reversible, High Molecular Weight Palladium and Platinum Coordination Polymers Based on Phosphorus Ligands

NARCIS (Netherlands)

Paulusse, Jos Marie Johannes; Huijbers, Jeroen P.J.; Sijbesma, Rint P.

2005-01-01

A general strategy for the preparation and characterization of high molecular weight coordination polymers based on bifunctional phosphorus ligands and palladium or platinum dichloride is described. Metal-to-ligand stoichiometry is of key importance for the formation of linear coordination polymers

Video game-based coordinative training improves ataxia in children with degenerative ataxia.

Science.gov (United States)

Ilg, Winfried; Schatton, Cornelia; Schicks, Julia; Giese, Martin A; Schöls, Ludger; Synofzik, Matthis

2012-11-13

Degenerative ataxias in children present a rare condition where effective treatments are lacking. Intensive coordinative training based on physiotherapeutic exercises improves degenerative ataxia in adults, but such exercises have drawbacks for children, often including a lack of motivation for high-frequent physiotherapy. Recently developed whole-body controlled video game technology might present a novel treatment strategy for highly interactive and motivational coordinative training for children with degenerative ataxias. We examined the effectiveness of an 8-week coordinative training for 10 children with progressive spinocerebellar ataxia. Training was based on 3 Microsoft Xbox Kinect video games particularly suitable to exercise whole-body coordination and dynamic balance. Training was started with a laboratory-based 2-week training phase and followed by 6 weeks training in children's home environment. Rater-blinded assessments were performed 2 weeks before laboratory-based training, immediately prior to and after the laboratory-based training period, as well as after home training. These assessments allowed for an intraindividual control design, where performance changes with and without training were compared. Ataxia symptoms were significantly reduced (decrease in Scale for the Assessment and Rating of Ataxia score, p = 0.0078) and balance capacities improved (dynamic gait index, p = 0.04) after intervention. Quantitative movement analysis revealed improvements in gait (lateral sway: p = 0.01; step length variability: p = 0.01) and in goal-directed leg placement (p = 0.03). Despite progressive cerebellar degeneration, children are able to improve motor performance by intensive coordination training. Directed training of whole-body controlled video games might present a highly motivational, cost-efficient, and home-based rehabilitation strategy to train dynamic balance and interaction with dynamic environments in a large variety of young-onset neurologic

A Minimal Model Describing Hexapedal Interlimb Coordination: The Tegotae-Based Approach

Directory of Open Access Journals (Sweden)

Dai Owaki

2017-06-01

Full Text Available Insects exhibit adaptive and versatile locomotion despite their minimal neural computing. Such locomotor patterns are generated via coordination between leg movements, i.e., an interlimb coordination, which is largely controlled in a distributed manner by neural circuits located in thoracic ganglia. However, the mechanism responsible for the interlimb coordination still remains elusive. Understanding this mechanism will help us to elucidate the fundamental control principle of animals' agile locomotion and to realize robots with legs that are truly adaptive and could not be developed solely by conventional control theories. This study aims at providing a “minimal" model of the interlimb coordination mechanism underlying hexapedal locomotion, in the hope that a single control principle could satisfactorily reproduce various aspects of insect locomotion. To this end, we introduce a novel concept we named “Tegotae,” a Japanese concept describing the extent to which a perceived reaction matches an expectation. By using the Tegotae-based approach, we show that a surprisingly systematic design of local sensory feedback mechanisms essential for the interlimb coordination can be realized. We also use a hexapod robot we developed to show that our mathematical model of the interlimb coordination mechanism satisfactorily reproduces various insects' gait patterns.

Developing community based rehabilitation for cancer survivors: Organizing for coordination and coherence in practice

DEFF Research Database (Denmark)

la Cour, Karen; Cutchin, Malcolm

2013-01-01

Background. Increasing incidence of cancer combined with prolonged survival have raised the need for developing community based rehabilitation. The objectives of the analysis were to describe and interpret the key issues related to coordination and coherence of community-based cancer rehabilitation......-based organization, and informal relationships were fundamental for developing coordination and coherence. Conclusions. Coordination and coherence in community-based rehabilitation relies on increased collaboration, which may best be optimized by use of shared frameworks within and across systems. Results highlight...... in Denmark and to provide insights relevant for other contexts. Methods. Twenty-seven rehabilitation managers across 15 municipalities in Denmark comprised the sample. The study was designed with a combination of data collection methods including questionnaires, individual interviews, and focus groups...

Relation between coordinate systems describing the dynamics of a loaded Stewart platform

Science.gov (United States)

Petrova, V. I.

2018-05-01

The paper puts forward formulae for transformation of coordinates in three coordinate frames used for the study of motion of a loaded Stewart platform, which is the central mechanism of the dynamic bench. A new method for finding the law of variation of coordinates is proposed. This method depends on solving the problem-specific system of differential equations.

Comparison on Integer Wavelet Transforms in Spherical Wavelet Based Image Based Relighting

Institute of Scientific and Technical Information of China (English)

WANGZe; LEEYin; LEUNGChising; WONGTientsin; ZHUYisheng

2003-01-01

To provide a good quality rendering in the Image based relighting (IBL) system, tremendous reference images under various illumination conditions are needed. Therefore data compression is essential to enable interactive action. And the rendering speed is another crucial consideration for real applications. Based on Spherical wavelet transform (SWT), this paper presents a quick representation method with Integer wavelet transform (IWT) for the IBL system. It focuses on comparison on different IWTs with the Embedded zerotree wavelet (EZW) used in the IBL system. The whole compression procedure contains two major compression steps. Firstly, SWT is applied to consider the correlation among different reference images. Secondly, the SW transformed images are compressed with IWT based image compression approach. Two IWTs are used and good results are showed in the simulations.

State-of-the-art piezoelectric transformer-based switch mode power supplies

DEFF Research Database (Denmark)

Ekhtiari, Marzieh; Zhang, Zhe; Andersen, Michael A. E.

2014-01-01

Inductorless switch mode power supplies based on piezoelectric transformers are used to replace conventional transformers in high power density switch mode power supplies. Even though piezoelectric-based converters exhibit a high d egree of nonlinearity, it is desirable to use piezoelectric transfo...... discusses power supplies with the trend evaluation of piezoelectric transformer-based converter topologies and control methods. The challenges of piezoelectric transformers regarding soft switching capability and nonlinearity are addressed. This paper can be used as a guideline f or choosing a proper...... topology of piezoelectric-based switch mode power supply and a control method for the required application....

Bäcklund transformations and divisor doubling

Science.gov (United States)

Tsiganov, A. V.

2018-03-01

In classical mechanics well-known cryptographic algorithms and protocols can be very useful for construction of canonical transformations preserving form of Hamiltonians. We consider application of a standard generic divisor doubling for construction of new auto Bäcklund transformations for the Lagrange top and Hénon-Heiles system separable in parabolic coordinates.

Alkaline earth-based coordination polymers derived from a cyclotriphosphazene-functionalized hexacarboxylate

International Nuclear Information System (INIS)

Ling, Yajing; Bai, Dongjie; Feng, Yunlong; He, Yabing

2016-01-01

Combination of hexakis(4-carboxylatephenoxy)cyclotriphosphazene with alkaline earth ions of increasing ionic radii (Mg 2+ , Ca 2+ and Ba 2+ ) under different solvothermal conditions yielded three new coordination polymers, and their crystal structures were determined by single-crystal X-ray diffraction analysis. The magnesium compound displays a three dimensional (3D) network structure constructed from the deprotonated ligand and the secondary building block Mg(COO) 4 , which can be rationalized as a (4,6)-connected topological net with the Schläfli symbol of (4 4 ·6 2 ) 3 (4 9 ·6 6 ) 2 . The calcium compound consists of 1D infinite “Ca-O” inorganic chains connected by the deprotonated ligands to from a 3D framework. The barium compound exhibits a 3D framework in which 1D “Ba-O” inorganic chains are connected together by the deprotonated organic linkers. Due to the semi-rigid nature, the ligand adopts distinctly different conformations in the three compounds. The metal ions’ influence exerted on the final structure of the resulting coordination polymers is also discussed. When the radii of alkaline earth ions increases descending down the group from Mg(II) to Ba(II), the coordination number becomes larger and more versatile: from 6 in the magnesium compound, to 6,7 and 10 in the calcium compound, and to 8 and 9 in the barium compound, thus substantially influencing the resulting final framework structures. Also, the photophysical properties were investigated systematically, revealing that the three compounds are photoluminscent in the solid state at room temperature. This work demonstrates that although the multiplicity of conformation in the hexacarboxylate ligand based on the inorganic scaffold cyclotriphosphazene makes it difficult to predict how this ligand will form extended network, but provides unique opportunities for the formation of diverse inorganic-organic hybrids exhibiting rich structural topologies. - Graphical abstract: Three alkaline

Analysis of the Chirplet Transform-Based Algorithm for Radar Detection of Accelerated Targets

Science.gov (United States)

Galushko, V. G.; Vavriv, D. M.

2017-06-01

Purpose: Efficiency analysis of an optimal algorithm of chirp signal processing based on the chirplet transform as applied to detection of radar targets in uniformly accelerated motion. Design/methodology/approach: Standard methods of the optimal filtration theory are used to investigate the ambiguity function of chirp signals. Findings: An analytical expression has been derived for the ambiguity function of chirp signals that is analyzed with respect to detection of radar targets moving at a constant acceleration. Sidelobe level and characteristic width of the ambiguity function with respect to the coordinates frequency and rate of its change have been estimated. The gain in the signal-to-noise ratio has been assessed that is provided by the algorithm under consideration as compared with application of the standard Fourier transform to detection of chirp signals against a “white” noise background. It is shown that already with a comparatively small (processing channels (elementary filters with respect to the frequency change rate) the gain in the signal-tonoise ratio exceeds 10 dB. A block diagram of implementation of the algorithm under consideration is suggested on the basis of a multichannel weighted Fourier transform. Recommendations as for selection of the detection algorithm parameters have been developed. Conclusions: The obtained results testify to efficiency of application of the algorithm under consideration to detection of radar targets moving at a constant acceleration. Nevertheless, it seems expedient to perform computer simulations of its operability with account for the noise impact along with trial measurements in real conditions.

Local Gaussian approximation in the generator coordinate method

International Nuclear Information System (INIS)

Onishi, Naoki; Une, Tsutomu.

1975-01-01

A transformation from a non-orthogonal representation to an orthogonal representation of wave functions is studied in the generator coordinate method. A differential equation can be obtained by the transformation for a case that the eigenvalue equation of the overlap kernel is solvable. By assuming local Gaussian overlap, we derive a Schroedinger-type equation for the collective motion from the Hill-Wheeler integral equation. (auth.)

Local Gaussian approximation in the generator coordinate method

Energy Technology Data Exchange (ETDEWEB)

Onishi, N [Tokyo Univ. (Japan). Coll. of General Education; Une, Tsutomu

1975-02-01

A transformation from a non-orthogonal representation to an orthogonal representation of wave functions is studied in the generator coordinate method. A differential equation can be obtained by the transformation for a case that the eigenvalue equation of the overlap kernel is solvable. By assuming local Gaussian overlap, we derive a Schroedinger-type equation for the collective motion from the Hill-Wheeler integral equation.

Coordinate Systems Integration for Craniofacial Database from Multimodal Devices

Directory of Open Access Journals (Sweden)

Deni Suwardhi

2005-05-01

Full Text Available This study presents a data registration method for craniofacial spatial data of different modalities. The data consists of three dimensional (3D vector and raster data models. The data is stored in object relational database. The data capture devices are Laser scanner, CT (Computed Tomography scan and CR (Close Range Photogrammetry. The objective of the registration is to transform the data from various coordinate systems into a single 3-D Cartesian coordinate system. The standard error of the registration obtained from multimodal imaging devices using 3D affine transformation is in the ranged of 1-2 mm. This study is a step forward for storing the craniofacial spatial data in one reference system in database.

Effectiveness of Discovery Learning-Based Transformation Geometry Module

Science.gov (United States)

Febriana, R.; Haryono, Y.; Yusri, R.

2017-09-01

Development of transformation geometry module is conducted because the students got difficulties to understand the existing book. The purpose of the research was to find out the effectiveness of discovery learning-based transformation geometry module toward student’s activity. Model of the development was Plomp model consisting preliminary research, prototyping phase and assessment phase. The research was focused on assessment phase where it was to observe the designed product effectiveness. The instrument was observation sheet. The observed activities were visual activities, oral activities, listening activities, mental activities, emotional activities and motor activities. Based on the result of the research, it is found that visual activities, learning activities, writing activities, the student’s activity is in the criteria very effective. It can be concluded that the use of discovery learning-based transformation geometry module use can increase the positive student’s activity and decrease the negative activity.

Residue-based Coordinated Selection and Parameter Design of Multiple Power System Stabilizers (PSSs)

DEFF Research Database (Denmark)

Su, Chi; Hu, Weihao; Fang, Jiakun

2013-01-01

data from time domain simulations. Then a coordinated approach for multiple PSS selection and parameter design based on residue method is proposed and realized in MATLAB m-files. Particle swarm optimization (PSO) is adopted in the coordination process. The IEEE 39-bus New England system model...

Interoperabilità dei dati territoriali: il GN si dota di un nuovo servizio per la trasformazione di coordinate per l’intero territorio italiano

Directory of Open Access Journals (Sweden)

Salvatore Costabile

2013-03-01

Full Text Available Il servizio di trasformazione di coordinate (CTS, Coordinate Transformation Service è uno dei servizi ditrasformazione geometrica previsti dall’implementazione della direttiva 2007/2/CE INSPIRE. Le applicazioniWEB e WCTS messe a disposizione dal Geoportale Nazionale consentono a tutti gli utenti di eseguiretrasformazioni di coordinate sull’intero territorio italiano impiegando i grigliati rilasciati dall’IstitutoGeografico Militare Italiano (IGM.Abstract The Coordinate Transformation Service (CTS is one of theservices provided by the implementation of the geometric transformation of the INSPIRE Directive 2007/2/EC. WEB applications and WCTS service are provided by the National Geoportal (Geoportale Nazionale allowing all users to perform coordinate transformations on the entire Italian territory using also detailed grid value released by IGM (Italian Military Geographical Institute.  

Interoperabilità dei dati territoriali: il GN si dota di un nuovo servizio per la trasformazione di coordinate per l’intero territorio italiano

Directory of Open Access Journals (Sweden)

Salvatore Costabile

2013-03-01

Full Text Available Il servizio di trasformazione di coordinate (CTS, Coordinate Transformation Service è uno dei servizi ditrasformazione geometrica previsti dall’implementazione della direttiva 2007/2/CE INSPIRE. Le applicazioniWEB e WCTS messe a disposizione dal Geoportale Nazionale consentono a tutti gli utenti di eseguiretrasformazioni di coordinate sull’intero territorio italiano impiegando i grigliati rilasciati dall’IstitutoGeografico Militare Italiano (IGM. Abstract The Coordinate Transformation Service (CTS is one of theservices provided by the implementation of the geometric transformation of the INSPIRE Directive 2007/2/EC. WEB applications and WCTS service are provided by the National Geoportal (Geoportale Nazionale allowing all users to perform coordinate transformations on the entire Italian territory using also detailed grid value released by IGM (Italian Military Geographical Institute.

Gear Fault Detection Based on Teager-Huang Transform

Directory of Open Access Journals (Sweden)

Hui Li

2010-01-01

Full Text Available Gear fault detection based on Empirical Mode Decomposition (EMD and Teager Kaiser Energy Operator (TKEO technique is presented. This novel method is named as Teager-Huang transform (THT. EMD can adaptively decompose the vibration signal into a series of zero mean Intrinsic Mode Functions (IMFs. TKEO can track the instantaneous amplitude and instantaneous frequency of the Intrinsic Mode Functions at any instant. The experimental results provide effective evidence that Teager-Huang transform has better resolution than that of Hilbert-Huang transform. The Teager-Huang transform can effectively diagnose the fault of the gear, thus providing a viable processing tool for gearbox defect detection and diagnosis.

Nonlocal transformation optics.

Science.gov (United States)

Castaldi, Giuseppe; Galdi, Vincenzo; Alù, Andrea; Engheta, Nader

2012-02-10

We show that the powerful framework of transformation optics may be exploited for engineering the nonlocal response of artificial electromagnetic materials. Relying on the form-invariant properties of coordinate-transformed Maxwell's equations in the spectral domain, we derive the general constitutive "blueprints" of transformation media yielding prescribed nonlocal field-manipulation effects and provide a physically incisive and powerful geometrical interpretation in terms of deformation of the equifrequency contours. In order to illustrate the potentials of our approach, we present an example of application to a wave-splitting refraction scenario, which may be implemented via a simple class of artificial materials. Our results provide a systematic and versatile framework which may open intriguing venues in dispersion engineering of artificial materials.

Network-Based Coordination of Civil-Service Training: Lessons from the Case of Estonia

Directory of Open Access Journals (Sweden)

Metsma Merilin

2017-06-01

Full Text Available The focus of this article is on the coordination of civil-service training in a decentralized civil-service system. The Estonian case is studied. The article investigates network-based coordination, analyzes the power sources of the central coordinator and discusses the opportunities and limitations of creating coherence through network-type cooperation. The article concludes that the key power sources for the central coordinator are financial, human and technical resources paired with knowledge, leadership and commitment. The case study shows that, in a decentralized civil service system, a common understanding on training and development can be fostered by intense collaboration through networks.

Evaluation of Rule-based Modularization in Model Transformation Languages illustrated with ATL

NARCIS (Netherlands)

Ivanov, Ivan; van den Berg, Klaas; Jouault, Frédéric

This paper studies ways for modularizing transformation definitions in current rule-based model transformation languages. Two scenarios are shown in which the modular units are identified on the base of the relations between source and target metamodels and on the base of generic transformation

Collaborative multi-agent reinforcement learning based on a novel coordination tree frame with dynamic partition

NARCIS (Netherlands)

Fang, M.; Groen, F.C.A.; Li, H.; Zhang, J.

2014-01-01

In the research of team Markov games, computing the coordinate team dynamically and determining the joint action policy are the main problems. To deal with the first problem, a dynamic team partitioning method is proposed based on a novel coordinate tree frame. We build a coordinate tree with

Conformal transformations in superspace

International Nuclear Information System (INIS)

Dao Vong Duc

1977-01-01

The spinor extension of the conformal algebra is investigated. The transformation law of superfields under the conformal coordinate inversion R defined in the superspace is derived. Using R-technique, the superconformally covariant two-point and three-point correlation functions are found

Invisible Base Electrode Coordinates Approximation for Simultaneous SPECT and EEG Data Visualization

Science.gov (United States)

Kowalczyk, L.; Goszczynska, H.; Zalewska, E.; Bajera, A.; Krolicki, L.

2014-04-01

This work was performed as part of a larger research concerning the feasibility of improving the localization of epileptic foci, as compared to the standard SPECT examination, by applying the technique of EEG mapping. The presented study extends our previous work on the development of a method for superposition of SPECT images and EEG 3D maps when these two examinations are performed simultaneously. Due to the lack of anatomical data in SPECT images it is a much more difficult task than in the case of MRI/EEG study where electrodes are visible in morphological images. Using the appropriate dose of radioisotope we mark five base electrodes to make them visible in the SPECT image and then approximate the coordinates of the remaining electrodes using properties of the 10-20 electrode placement system and the proposed nine-ellipses model. This allows computing a sequence of 3D EEG maps spanning on all electrodes. It happens, however, that not all five base electrodes can be reliably identified in SPECT data. The aim of the current study was to develop a method for determining the coordinates of base electrode(s) missing in the SPECT image. The algorithm for coordinates approximation has been developed and was tested on data collected for three subjects with all visible electrodes. To increase the accuracy of the approximation we used head surface models. Freely available model from Oostenveld research based on data from SPM package and our own model based on data from our EEG/SPECT studies were used. For data collected in four cases with one electrode not visible we compared the invisible base electrode coordinates approximation for Oostenveld and our models. The results vary depending on the missing electrode placement, but application of the realistic head model significantly increases the accuracy of the approximation.

Invisible Base Electrode Coordinates Approximation for Simultaneous SPECT and EEG Data Visualization

Directory of Open Access Journals (Sweden)

Kowalczyk L.

2014-04-01

Full Text Available This work was performed as part of a larger research concerning the feasibility of improving the localization of epileptic foci, as compared to the standard SPECT examination, by applying the technique of EEG mapping. The presented study extends our previous work on the development of a method for superposition of SPECT images and EEG 3D maps when these two examinations are performed simultaneously. Due to the lack of anatomical data in SPECT images it is a much more difficult task than in the case of MRI/EEG study where electrodes are visible in morphological images. Using the appropriate dose of radioisotope we mark five base electrodes to make them visible in the SPECT image and then approximate the coordinates of the remaining electrodes using properties of the 10-20 electrode placement system and the proposed nine-ellipses model. This allows computing a sequence of 3D EEG maps spanning on all electrodes. It happens, however, that not all five base electrodes can be reliably identified in SPECT data. The aim of the current study was to develop a method for determining the coordinates of base electrode(s missing in the SPECT image. The algorithm for coordinates approximation has been developed and was tested on data collected for three subjects with all visible electrodes. To increase the accuracy of the approximation we used head surface models. Freely available model from Oostenveld research based on data from SPM package and our own model based on data from our EEG/SPECT studies were used. For data collected in four cases with one electrode not visible we compared the invisible base electrode coordinates approximation for Oostenveld and our models. The results vary depending on the missing electrode placement, but application of the realistic head model significantly increases the accuracy of the approximation.

Cd(II) and Zn(II) thiocyanate coordination compounds with 3-ethylpyridine. Synthesis, crystal structures and properties

Energy Technology Data Exchange (ETDEWEB)

Neumann, Tristan; Jess, Inke; Dos Santos Cunha, Cesar; Terraschke, Huayna; Naether, Christian [Kiel Univ. (Germany). Inst. fuer Anorganische Chemie

2018-04-01

Reaction of Cd(NCS){sub 2} and Zn(NCS){sub 2} with 3-ethylpyridine leads to the formation of compounds of compositions M(NCS){sub 2}(3-ethylpyridine){sub 4} (M=Cd, 1-Cd; Zn, 1-Zn) and M(NCS){sub 2}(3-ethylpyridine){sub 2} (M=Cd, 2-Cd; Zn, 2-Zn). 1-Cd and 1-Zn are isotypic and form discrete complexes in which the metal cations are octahedrally coordinated by two trans-coordinating N-bonded thiocyanate anions and four 3-ethylpyridine co-ligands. In 2-Cd the cations are also octahedrally coordinated but linked into chains by pairs of μ-1,3-bridging anionic ligands. 2-Zn is built up of discrete complexes, in which the Zn cation is tetrahedrally coordinated by two N-bonded thiocyanate anions and two 3-ethylpyridine co-ligands. Compounds 1-Cd, 2-Cd and 2-Zn can be prepared in a pure state, whereas 1-Zn is unstable and transforms on storage into 2-Zn. If 1-Cd and 1-Zn are heated, a transformation into 2-Cd, respectively 2-Zn is observed. Luminescence measurements reveal that 1-Cd, 2-Cd and 2-Zn emit light in the blue spectral range with maxima at, respectively, 21724, 21654 and 22055 cm{sup -1}, assigned to ligand-based luminescence.

Improving the cooling performance of electrical distribution transformer using transformer oil – Based MEPCM suspension

Directory of Open Access Journals (Sweden)

Mushtaq Ismael Hasan

2017-04-01

Full Text Available In this paper the electrical distribution transformer has been studied numerically and the effect of outside temperature on its cooling performance has been investigated. The temperature range studied covers the hot climate regions. 250 KVA distribution transformer is chosen as a study model. A novel cooling fluid is proposed to improve the cooling performance of this transformer, transformer oil-based microencapsulated phase change materials suspension is used with volume concentration (5–25% as a cooling fluid instead of pure transformer oil. Paraffin wax is used as a phase change material to make the suspension, in addition to the ability of heat absorption due to melting, the paraffin wax considered as a good electrical insulator. Results obtained show that, using of MEPCM suspension instead of pure transformer oil lead to improve the cooling performance of transformer by reducing its temperature and as a consequence increasing its protection against the breakdown. The melting fraction increased with increasing outside temperature up to certain temperature after which the melting fraction reach maximum constant value (MF = 1 which indicate that, the choosing of PCM depend on the environment in which the transformer is used.

Zernike Basis to Cartesian Transformations

Directory of Open Access Journals (Sweden)

Mathar, R. J.

2009-12-01

Full Text Available The radial polynomials of the 2D (circular and 3D (spherical Zernike functions are tabulated as powers of the radial distance. The reciprocal tabulation of powers of the radial distance in series of radial polynomials is also given, based on projections that take advantage of the orthogonality of the polynomials over the unit interval. They play a role in the expansion of products of the polynomials into sums, which is demonstrated by some examples. Multiplication of the polynomials by the angular bases (azimuth, polar angle defines the Zernike functions, for which we derive transformations to and from the Cartesian coordinate system centered at the middle of the circle or sphere.

Zernike basis to cartesian transformations

Directory of Open Access Journals (Sweden)

Mathar R.J.

2009-01-01

Full Text Available The radial polynomials of the 2D (circular and 3D (spherical Zernike functions are tabulated as powers of the radial distance. The reciprocal tabulation of powers of the radial distance in series of radial polynomials is also given, based on projections that take advantage of the orthogonality of the polynomials over the unit interval. They play a role in the expansion of products of the polynomials into sums, which is demonstrated by some examples. Multiplication of the polynomials by the angular bases (azimuth, polar angle defines the Zernike functions, for which we derive transformations to and from the Cartesian coordinate system centered at the middle of the circle or sphere.

Developing community based rehabilitation for cancer survivors: organizing for coordination and coherence in practice

Science.gov (United States)

2013-01-01

Background Increasing incidences of cancer combined with prolonged survival have raised the need for developing community based rehabilitation. The objectives of the analysis were to describe and interpret the key issues related to coordination and coherence of community-based cancer rehabilitation in Denmark and to provide insights relevant for other contexts. Methods Twenty-seven rehabilitation managers across 15 municipalities in Denmark comprised the sample. The study was designed with a combination of data collection methods including questionnaires, individual interviews, and focus groups. A Grounded Theory approach was used to analyze the data. Results A lack of shared cultures among health care providers and systems of delivery was a primary barrier to collaboration which was essential for establishing coordination of care. Formal multidisciplinary steering committees, team-based organization, and informal relationships were fundamental for developing coordination and coherence. Conclusions Coordination and coherence in community-based rehabilitation relies on increased collaboration, which may best be optimized by use of shared frameworks within and across systems. Results highlight the challenges faced in practical implementation of community rehabilitation and point to possible strategies for its enhancement. PMID:24004881

Polynuclear complexes of copper(I) halides: coordination chemistry and catalytic transformations of alkynes

International Nuclear Information System (INIS)

Mykhalichko, B M; Mys'kiv, M G; Temkin, Oleg N

2000-01-01

Characteristic features of the coordination chemistry of Cu(I) and mechanisms of catalytic conversions of alkynes in the CuCl-MCl-H 2 O-HC≡CR system (MCl is alkali metal or ammonium chloride or amine hydrochloride; R=H, CH 2 OH, CH=CH 2 , etc.) are analysed based on studies of the compositions and structures of copper(I) chloride (bromide) complexes, alkyne π-complexes and ethynyl organometallic polynuclear compounds formed in this system in solutions and in the crystalline state. The role of polynuclear complexes in various reactions of alkynes is discussed. The bibliography includes 149 references.

Performance versus values in sustainability transformation of food systems

DEFF Research Database (Denmark)

Alrøe, Hugo F.; Sautier, Marion; Legun, Katharine

2017-01-01

Questions have been raised on what role the knowledge provided by sustainability science actually plays in the transition to sustainability and what role it may play in the future. In this paper we investigate different approaches to sustainability transformation of food systems by analyzing......-based approaches that aim at communicating and mediating sustainability values to enable coordinated and cooperative action to transform the food system. We identify their respective strengths and weaknesses based on a cross-case analysis of four cases, and propose that the two approaches, likeWeber's two types...... of rationality, are complementary-because they are based on complementary observer stances-and that an optimal in-between approach therefore cannot be found. However, there are options for reflexive learning by observing one perspective-and its possible blind spots-from the vantage point of the other, so we...

GOOD GOVERNANCE AND TRANSFORMATION

Directory of Open Access Journals (Sweden)

Hans-Jürgen WAGENER

2005-12-01

Full Text Available Transformation of a totalitarian, basically administratively coordinated system into a democratic one that is coordinated predominantly by markets and competition has been triggered by, among others, the perception of a serious deficit in welfare and happiness. Public policy has a special task transforming the economic order by liberalisation, privatisation, stabilisation and the installation of institutions that are supportive for competition. After 15 years since transformation began, there are sufficiently differentiated success stories to test the hypothesis: it was good governance that is responsible for success and bad governance for failure. The empirical results support the “Lorenzetti hypothesis”: where freedom, security and trust prevail, the economy flourishes, where they are lacking, the costs of long-term investment are too high. The initial conditions of transition countries seem to be quite similar, nevertheless, even there one can discern good and bad governance. The extent of socialist lawfulness, planning security, cronyism and corruption differed widely between East Berlin and Tashkent. And a good deal of such variations can be found in the pre-socialist history of these countries. However, the main conclusion is that the co-evolution hypothesis states that both, welfare and good governance, go together.

Quantitative Comparison of Tolerance-Based Feature Transforms

OpenAIRE

Reniers, Dennie; Telea, Alexandru

2006-01-01

Tolerance-based feature transforms (TFTs) assign to each pixel in an image not only the nearest feature pixels on the boundary (origins), but all origins from the minimum distance up to a user-defined tolerance. In this paper, we compare four simple-to-implement methods for computing TFTs for binary images. Of these, two are novel methods and two extend existing distance transform algorithms. We quantitatively and qualitatively compare all algorithms on speed and accuracy of both distance and...

A reversible transform for seismic data processing

International Nuclear Information System (INIS)

Burnett, William A; Ferguson, Robert J

2011-01-01

We use the nonstationary equivalent of the Fourier shift theorem to derive a general one-dimensional integral transform for the application and removal of certain seismic data processing steps. This transform comes from the observation that many seismic data processing steps can be viewed as nonstationary shifts. The continuous form of the transform is exactly reversible, and the discrete form provides a general framework for unitary and pseudounitary imaging operators. Any processing step which can be viewed as a nonstationary shift in any domain is a special case of this transform. Nonstationary shifts generally produce coordinate distortions between input and output domains, and those that preserve amplitudes do not conserve the energy of the input signal. The nonstationary frequency distortions, time distortions and nonphysical energy changes inherent to such operations are predicted and quantified by this transform. Processing steps of this type are conventionally implemented using interpolation operators to map discrete data values between input and output coordinate frames. Although not explicitly derived to perform interpolation, the transform here assumes the Fourier basis to predict values of the input signal between sampling locations. We demonstrate how interpolants commonly used in seismic data processing and imaging approximate the proposed method. We find that our transform is equivalent to the conventional sinc interpolant with no truncation. Once the transform is developed, we demonstrate its numerical implementation by matrix–vector multiplication. As an example, we use our transform to apply and remove normal moveout

Realization of two-dimensional transformations by the arithmetical module of an intelligent graphics terminal

International Nuclear Information System (INIS)

Leich, A.; Polyntsev, A.D.

1982-01-01

The structure and software of the arithmetical module for the multi-microprocessor intelligent graphics terminal designed for realization of the world coordinate two-dimensional transformation are described. The module performs the operations like coordinate system displacement, scaling and rotation as well as transformations for window/viewport separation

Anion-Controlled Architecture and Photochromism of Naphthalene Diimide-Based Coordination Polymers

Directory of Open Access Journals (Sweden)

Jian-Jun Liu

2018-02-01

Full Text Available Three new cadmium coordination polymers, namely [Cd(NO32(DPNDI(CH3OH]·CH3OH (1, [Cd(SCN2(DPNDI] (2, and [Cd(DPNDI2(DMF2]·2ClO4 (3 (DPNDI = N,N-di(4-pyridyl-1,4,5,8-naphthalene diimide, DMF = N,N-dimethylformamide have been synthesized by reactions of DPNDI with Cd(NO32, Cd(SCN2, and Cd(ClO42, respectively. Compound 1 is a one-dimensional coordination polymer with strong lone pair-π interactions between the coordinated NO3− anions and the imide ring of DPNDI; while 2 is a two-dimensional network with a (4, 4 net topology. In the case of 3, due to the presence of uncoordinated perchlorate counter ions, it exhibits a non-interpenetrated square-grid coordination polymer containing one-dimensional rhomboid channels. The structural diversity in these compounds is attributed to different coordination abilities and geometries of counter anions. Due to the presence of electron-deficient NDI moiety, the photochromic behavior of these compounds was studied. Interestingly, only compounds 1 and 3 exhibit color changes under light irradiation. The influence of the anions on the photochromism process of the NDI-based materials has been discussed.

E-Business Transformation: An Analysis Framework Based on Critical Organizational Dimensions

Institute of Scientific and Technical Information of China (English)

ZENG Qingfeng; CHEN Wenbo; HUANG Lihua

2008-01-01

In the era of Internet economics, e-business has become one of the most important strategic factors for enterprise development, so theoretical systems are needed to help enterprises develop e-business transformation strategies. A review of enterprise transformation theory identified five critical organization dimensions of e-business transformation, corporate strategy and vision transformation, organizational structure, product and market transformation, business process transformation, and corporate culture transformation. An e-business transformation process model was developed based on the five dimensions. This model can help enterprises to more effectively implement e-business transformation strategies.

Ground-based observations coordinated with Viking satellite measurements

International Nuclear Information System (INIS)

Opgenoorth, H.J.; Kirkwood, S.

1989-01-01

The instrumentation and the orbit of the Viking satellite made this first Swedish satellite mission ideally suited for coordinated observations with the dense network of ground-based stations in northern Scandinavia. Several arrays of complementing instruments such as magnetometers, all-sky cameras, riometers and doppler radars monitored on a routine basis the ionosphere under the magnetospheric region passed by Viking. For a large number of orbits the Viking passages close to Scandinavia were covered by the operation of specially designed programmes at the European incoherent-scatter facility (EISCAT). First results of coordinated observations on the ground and aboard Viking have shed new light on the most spectacular feature of substorm expansion, the westward-travelling surge. The end of a substorm and the associated decay of a westward-travelling surge have been analysed. EISCAT measurements of high spatial and temporal resolution indicate that the conductivities and electric fields associated with westward-travelling surges are not represented correctly by the existing models. (author)

Pappas' scheme of correlating R6 and R4 co-ordinate transformations

International Nuclear Information System (INIS)

Teli, M.T.

1984-01-01

Pappas has suggested that R 4 co-ordinates can be connected with those in the R 6 by taking t'sub(x)=t'sub(y)=t'sub(z)=t'. Such connection is here obtained by introducing the scaling of space-time co-ordinates xsub(i), tsub(i) in all the frames by the corresponding factor c/c'sub(i) and have shown that taking of t'sub(x)=t'sub(y)=t'sub(z)=t' for this purpose is not necessary. The scaling factors get ignored after the connection

Finite Countermodel Based Verification for Program Transformation (A Case Study

Directory of Open Access Journals (Sweden)

Alexei P. Lisitsa

2015-12-01

Full Text Available Both automatic program verification and program transformation are based on program analysis. In the past decade a number of approaches using various automatic general-purpose program transformation techniques (partial deduction, specialization, supercompilation for verification of unreachability properties of computing systems were introduced and demonstrated. On the other hand, the semantics based unfold-fold program transformation methods pose themselves diverse kinds of reachability tasks and try to solve them, aiming at improving the semantics tree of the program being transformed. That means some general-purpose verification methods may be used for strengthening program transformation techniques. This paper considers the question how finite countermodels for safety verification method might be used in Turchin's supercompilation method. We extract a number of supercompilation sub-algorithms trying to solve reachability problems and demonstrate use of an external countermodel finder for solving some of the problems.

Design of coordinated controller in nuclear power plant based on digital instrument and control technology

International Nuclear Information System (INIS)

Cheng Shouyu; Peng Minjun; Liu Xinkai; Zhao Qiang; Deng Xiangxin

2014-01-01

Nuclear power plant (NPP) is a multi-input and multi-output, no-linear and time-varying complex system. The conventional PID controller is usually used in NPP control system which is based on analog instrument. The system parameters are easy to overshoot and the response time is longer in the control mode of the conventional PID. In order to improve this condition, a new coordinated control strategy which is based on expert system and the original controllers in the digital instrument and control technology was presented. In order to verify and validate it, the proposed coordinated control technology was tested by the full-scope real-time simulation system. The results prove that using digital instrument and control technology to achieve coordinated controller is feasible, the coordinated controller can effectively improve the dynamic operating characteristics of the system, and the coordinated controller is superior to the conventional PID controller in control performance. (authors)

Automatic astronomical coordinate determination using digital zenith cameras

Directory of Open Access Journals (Sweden)

S Farzaneh

2009-12-01

Full Text Available Celestial positioning has been used for navigation purposes for many years. Stars as the extra-terrestrial benchmarks provide unique opportunity in absolute point positioning. However, astronomical field data acquisition and data processing of the collected data is very time-consuming. The advent of the Global Positioning System (GPS nearly made the celestial positioning system obsolete. The new satellite-based positioning system has been very popular since it is very efficient and convenient for many daily life applications. Nevertheless, the celestial positioning method is never replaced by satellite-based positioning in absolute point positioning sense. The invention of electro-optical devices at the beginning of the 21st century was really a rebirth in geodetic astronomy. Today, the digital cameras with relatively high geometric and radiometric accuracy has opened a new insight in satellite attitude determination and the study of the Earth's surface geometry and physics of its interior, i.e., computation of astronomical coordinates and the vertical deflection components. This method or the so-called astrogeodetic vision-based method help us to determine astronomical coordinates with an accuracy better than 0.1 arc second. The theoretical background, an innovative transformation approach and the preliminary numerical results are addressed in this paper.

Design and performance of a pulse transformer based on Fe-based nanocrystalline core.

Science.gov (United States)

Yi, Liu; Xibo, Feng; Lin, Fuchang

2011-08-01

A dry-type pulse transformer based on Fe-based nanocrystalline core with a load of 0.88 nF, output voltage of more than 65 kV, and winding ratio of 46 is designed and constructed. The dynamic characteristics of Fe-based nanocrystalline core under the impulse with the pulse width of several microseconds were studied. The pulse width and incremental flux density have an important effect on the pulse permeability, so the pulse permeability is measured under a certain pulse width and incremental flux density. The minimal volume of the toroidal pulse transformer core is determined by the coupling coefficient, the capacitors of the resonant charging circuit, incremental flux density, and pulse permeability. The factors of the charging time, ratio, and energy transmission efficiency in the resonant charging circuit based on magnetic core-type pulse transformer are analyzed. Experimental results of the pulse transformer are in good agreement with the theoretical calculation. When the primary capacitor is 3.17 μF and charge voltage is 1.8 kV, a voltage across the secondary capacitor of 0.88 nF with peak value of 68.5 kV, rise time (10%-90%) of 1.80 μs is obtained.

Detection algorithm for glass bottle mouth defect by continuous wavelet transform based on machine vision

Science.gov (United States)

Qian, Jinfang; Zhang, Changjiang

2014-11-01

An efficient algorithm based on continuous wavelet transform combining with pre-knowledge, which can be used to detect the defect of glass bottle mouth, is proposed. Firstly, under the condition of ball integral light source, a perfect glass bottle mouth image is obtained by Japanese Computar camera through the interface of IEEE-1394b. A single threshold method based on gray level histogram is used to obtain the binary image of the glass bottle mouth. In order to efficiently suppress noise, moving average filter is employed to smooth the histogram of original glass bottle mouth image. And then continuous wavelet transform is done to accurately determine the segmentation threshold. Mathematical morphology operations are used to get normal binary bottle mouth mask. A glass bottle to be detected is moving to the detection zone by conveyor belt. Both bottle mouth image and binary image are obtained by above method. The binary image is multiplied with normal bottle mask and a region of interest is got. Four parameters (number of connected regions, coordinate of centroid position, diameter of inner cycle, and area of annular region) can be computed based on the region of interest. Glass bottle mouth detection rules are designed by above four parameters so as to accurately detect and identify the defect conditions of glass bottle. Finally, the glass bottles of Coca-Cola Company are used to verify the proposed algorithm. The experimental results show that the proposed algorithm can accurately detect the defect conditions of the glass bottles and have 98% detecting accuracy.

In-Situ Studies of Structure Transformation and Al Coordination of KAl(MoO42 during Heating by High Temperature Raman and 27Al NMR Spectroscopies

Directory of Open Access Journals (Sweden)

Min Wang

2017-03-01

Full Text Available Recent interest in optimizing composition and synthesis conditions of functional crystals, and the further exploration of new possible candidates for tunable solid-state lasers, has led to significant research on compounds in this family MIMIII(MVIO42 (MI = alkali metal, MIII = Al, In, Sc, Fe, Bi, lanthanide; MVI = Mo, W. The vibrational modes, structure transformation, and Al coordination of crystalline, glassy, and molten states of KAl(MoO42 have been investigated by in-situ high temperature Raman scattering and 27Al magic angle spinning nuclear magnetic resonance (MAS NMR spectroscopy, together with first principles density functional simulation of room temperature Raman spectrum. The results showed that, under the present fast quenching conditions, Al is present predominantly in [AlO6] octahedra in both KAl(MoO42 glass and melt, with the tetrahedrally coordinated Al being minor at approximately 2.7%. The effect of K+, from ordered arrangement in the crystal to random distribution in the melt, on the local chemical environment of Al, was also revealed. The distribution and quantitative analysis of different Al coordination subspecies are final discussed and found to be dependent on the thermal history of the glass samples.

Advances in Solid-State Transformations of Coordination Bonds: From the Ball Mill to the Aging Chamber

Directory of Open Access Journals (Sweden)

Cristina Mottillo

2017-01-01

Full Text Available Controlling the formation of coordination bonds is pivotal to the development of a plethora of functional metal-organic materials, ranging from coordination polymers, metal-organic frameworks (MOFs to metallodrugs. The interest in and commercialization of such materials has created a need for more efficient, environmentally-friendly routes for making coordination bonds. Solid-state coordination chemistry is a versatile greener alternative to conventional synthesis, offering quantitative yields, enhanced stoichiometric and topological selectivity, access to a wider range of precursors, as well as to molecules and materials not readily accessible in solution or solvothermally. With a focus on mechanochemical, thermochemical and “accelerated aging” approaches to coordination polymers, including pharmaceutically-relevant materials and microporous MOFs, this review highlights the recent advances in solid-state coordination chemistry and techniques for understanding the underlying reaction mechanisms.

Comment on self-inverse form of the Lorentz transformation

International Nuclear Information System (INIS)

Cook, R.J.

1979-01-01

It has been shown that the kinematic relations between two iertial reference frames in relative motion can be made symmetric by an appropriate orientation of the coordinate axes of the two frames. It follows from this symmetry and the principle of relativity that the transformation matrix, A, from one frame to the other, and its inverse, A -1 , are equal. This result, along with a limiting-velocity postulate, was used in a derivation of the Lorentz transformation. The present note points out that only two transformation laws are compatible with the symmetry condition A = A -1 . One of these is the Lorentz transformation and the other violates causality. Thus, if the limiting-velocity postulate is replaced by the requirement that causality be satisfied in all inertial frames, one arrives at a derivation of the Lorentz transformation based entirely on concepts which were known and widely accepted long before the advent of special relativity: the homogeneity and isotropy of space in all inertial frames, the principle of relativity, and the principle of causality

Model-Free Coordinated Control for MHTGR-Based Nuclear Steam Supply Systems

Directory of Open Access Journals (Sweden)

Zhe Dong

2016-01-01

Full Text Available The modular high temperature gas-cooled reactor (MHTGR is a typical small modular reactor (SMR that offers simpler, standardized and safer modular design by being factory built, requiring smaller initial capital investment, and having a shorter construction period. Thanks to its small size, the MHTGRs could be beneficial in providing electric power to remote areas that are deficient in transmission or distribution and in generating local power for large population centers. Based on the multi-modular operation scheme, the inherent safety feature of the MHTGRs can be applicable to large nuclear plants of any desired power rating. The MHTGR-based nuclear steam supplying system (NSSS is constituted by an MHTGR, a side-by-side arranged helical-coil once-through steam generator (OTSG and some connecting pipes. Due to the side-by-side arrangement, there is a tight coupling effect between the MHTGR and OTSG. Moreover, there always exists the parameter perturbation of the NSSSs. Thus, it is meaningful to study the model-free coordinated control of MHTGR-based NSSSs for safe, stable, robust and efficient operation. In this paper, a new model-free coordinated control strategy that regulates the nuclear power, MHTGR outlet helium temperature and OTSG outlet overheated steam temperature by properly adjusting the control rod position, helium flowrate and feed-water flowrate is established for the MHTGR-based NSSSs. Sufficient conditions for the globally asymptotic closed-loop stability is given. Finally, numerical simulation results in the cases of large range power decrease and increase illustrate the satisfactory performance of this newly-developed model-free coordinated NSSS control law.

Investigating shape representation using sensitivity to part- and axis-based transformations.

Science.gov (United States)

Denisova, Kristina; Feldman, Jacob; Su, Xiaotao; Singh, Manish

2016-09-01

Part- and axis-based approaches organize shape representations in terms of simple parts and their spatial relationships. Shape transformations that alter qualitative part structure have been shown to be more detectable than those that preserve it. We compared sensitivity to various transformations that change quantitative properties of parts and their spatial relationships, while preserving qualitative part structure. Shape transformations involving changes in length, width, curvature, orientation and location were applied to a small part attached to a larger base of a two-part shape. Increment thresholds were estimated for each transformation using a 2IFC procedure. Thresholds were converted into common units of shape difference to enable comparisons across transformations. Higher sensitivity was consistently found for transformations involving a parameter of a single part (length, width, curvature) than those involving spatial relations between two parts (relative orientation and location), suggesting a single-part superiority effect. Moreover, sensitivity to shifts in part location - a biomechanically implausible shape transformation - was consistently poorest. The influence of region-based geometry was investigated via stereoscopic manipulation of figure and ground. Sensitivity was compared across positive parts (protrusions) and negative parts (indentations) for transformations involving a change in orientation or location. For changes in part orientation (biomechanically plausible), sensitivity was better for positive than negative parts; whereas for changes in part location (biomechanically implausible), no systematic difference was observed. Copyright © 2015 Elsevier Ltd. All rights reserved.

Catalytic Organic Transformations Mediated by Actinide Complexes

Directory of Open Access Journals (Sweden)

Isabell S. R. Karmel

2015-10-01

Full Text Available This review article presents the development of organoactinides and actinide coordination complexes as catalysts for homogeneous organic transformations. This chapter introduces the basic principles of actinide catalysis and deals with the historic development of actinide complexes in catalytic processes. The application of organoactinides in homogeneous catalysis is exemplified in the hydroelementation reactions, such as the hydroamination, hydrosilylation, hydroalkoxylation and hydrothiolation of alkynes. Additionally, the use of actinide coordination complexes for the catalytic polymerization of α-olefins and the ring opening polymerization of cyclic esters is presented. The last part of this review article highlights novel catalytic transformations mediated by actinide compounds and gives an outlook to the further potential of this field.

Coordinated control strategy for hybrid wind farms with DFIG-based and PMSG-based wind farms during network unbalance

DEFF Research Database (Denmark)

Yao, Jun; Liu, Ruikuo; Zhou, Te

2017-01-01

This paper investigates the coordinated control strategy for a hybrid wind farm with doubly fed induction generator (DFIG)-based and direct-driven permanent-magnet synchronous generator (PMSG)-based wind farms during network unbalance. The negative-sequence current output capabilities of DFIG...... to the controllable operating regions, a targets selection scheme for each control unit is proposed to improve the stability of the hybrid wind farms containing both DFIG-based and PMSG-based wind farms during network unbalance, especially to avoid DFIG-based wind farm tripping from connected power grid under severe...... grid voltage unbalance conditions. Finally, the proposed coordinated control strategy is validated by the simulation results of a 30-MW-DFIG-based wind farm and a 30-MW-PMSG-based wind farm under different operation conditions and experimental results on a laboratory-scale experimental rig under severe...

Performance versus Values in Sustainability Transformation of Food Systems

Directory of Open Access Journals (Sweden)

Hugo F. Alrøe

2017-02-01

Full Text Available Questions have been raised on what role the knowledge provided by sustainability science actually plays in the transition to sustainability and what role it may play in the future. In this paper we investigate different approaches to sustainability transformation of food systems by analyzing the rationale behind transformative acts-the ground that the direct agents of change act upon- and how the type of rationale is connected to the role of research and how the agents of change are involved. To do this we employ Max Weber’s distinction between instrumental rationality and value-rationality in social action. In particular, we compare two different approaches to the role of research in sustainability transformation: (1 Performance-based approaches that measure performance and set up sustainability indicator targets and benchmarks to motivate the agents in the food system to change; (2 Values-based approaches that aim at communicating and mediating sustainability values to enable coordinated and cooperative action to transform the food system. We identify their respective strengths and weaknesses based on a cross-case analysis of four cases, and propose that the two approaches, like Weber’s two types of rationality, are complementary-because they are based on complementary observer stances—and that an optimal in-between approach therefore cannot be found. However, there are options for reflexive learning by observing one perspective-and its possible blind spots-from the vantage point of the other, so we suggest that new strategies for sustainability transformation can be found based on reflexive rationality as a third and distinct type of rationality.

Community-Based Ecotourism: The Transformation of Local Community

Directory of Open Access Journals (Sweden)

Pookhao Nantira

2014-01-01

Full Text Available Community-based ecotourism (CBET is considered a sustainable form of tourism that improves the quality of life of hosts at the tourist destination. Scholars have yet to explore the long-term operation of CBET in relation to its effects on the local way of life. Consequently, the purpose of this paper is to examine the transformation of a local community due to the operation of CBET in relation to sociocultural, economic and environmental aspects. The findings reveal that the community encounters both positive and negative impacts of transformation. However, unintended impacts of the CBET operation lay embedded in the transformation of relationships among the community members. The study identifies that close relationships among the villagers has been initially transformed to loose relationships due to forgotten communal goals; CBET has transformed from being a conservation tool to being a business-oriented goal which causes conflicts of interest among local people and alters traditional social structure. The study also agrees with the notion of social exchange theory for villagers to enhance environmental sustainability, and proposes that slight inequalities of benefits received from CBET causes social transformation at the local level.

Fault diagnosis of a Wind Turbine Rotor using a Multi-blade Coordinate Framework

DEFF Research Database (Denmark)

Henriksen, Lars Christian; Niemann, Hans Henrik; Poulsen, Niels Kjølstad

2012-01-01

Fault diagnosis of a wind turbine rotor is considered. The faults considered are sensor faults and blades mounted with a pitch offset. A fault at a single blade will result in asymmetries in the rotor, which can be applied for fault diagnosis. The diagnosis is derived by using the multiblade...... coordinate (MBC) transformation also known as the Coleman transformation together with active fault diagnosis (AFD). This transforms the setup from rotating to fixed frame coordinates. The rotor speed acts as the auxiliary input for the active diagnosis. The applied method take the varying rotor speed...... into account. Operation at different mean wind speeds is examined and it is discussed how to exploit the findings acquired by the investigation of the various faults....

Anomalous acoustic effect during martensitic transformations in titanium nickelide base alloys

International Nuclear Information System (INIS)

Plotnikov, V.A.; Kokhanenko, D.V.

2002-01-01

One carried out experiments to determine effect of external static stress on martensitic transformations and acoustic emission, Martensitic transformations in titanium nickelide base alloys under mechanical stress were determined to change nature of acoustic emission to anomalous one - cycling of transformations under gradual increase of mechanical stress during direct martensitic transformation was followed by increase of acoustic emission energy instead of reduction. The mentioned nature of acoustic emission is indicative of essential effect of external stress on martensitic transformations and energy dissipation during transformations [ru

Cobalt(II) and Cobalt(III) Coordination Compounds.

Science.gov (United States)

Thomas, Nicholas C.; And Others

1989-01-01

Presents a laboratory experiment which illustrates the formation of tris(phenanthroline)cobalt complexes in the 2+ and 3+ oxidation states, the effect of coordination on reactions of the ligand, and the use of a ligand displacement reaction in recovering the transformed ligand. Uses IR, UV-VIS, conductivity, and NMR. (MVL)

Image Retrieval Algorithm Based on Discrete Fractional Transforms

Science.gov (United States)

Jindal, Neeru; Singh, Kulbir

2013-06-01

The discrete fractional transforms is a signal processing tool which suggests computational algorithms and solutions to various sophisticated applications. In this paper, a new technique to retrieve the encrypted and scrambled image based on discrete fractional transforms has been proposed. Two-dimensional image was encrypted using discrete fractional transforms with three fractional orders and two random phase masks placed in the two intermediate planes. The significant feature of discrete fractional transforms benefits from its extra degree of freedom that is provided by its fractional orders. Security strength was enhanced (1024!)4 times by scrambling the encrypted image. In decryption process, image retrieval is sensitive for both correct fractional order keys and scrambling algorithm. The proposed approach make the brute force attack infeasible. Mean square error and relative error are the recital parameters to verify validity of proposed method.

Comment on 'Generalization of the Darboux transformation and generalized harmonic oscillators'

International Nuclear Information System (INIS)

Schulze-Halberg, Axel

2005-01-01

The authors Song and Klauder (2003 J. Phys. A: Math. Gen. 36 8673-84) present a generalized Darboux transformation, applicable to Hamiltonians with linear terms in the momentum. We show here that this generalized Darboux transformation is just the standard Darboux transformation in different coordinates. (comment)

Towards successful coordination of electronic health record based-referrals: a qualitative analysis.

Science.gov (United States)

Hysong, Sylvia J; Esquivel, Adol; Sittig, Dean F; Paul, Lindsey A; Espadas, Donna; Singh, Simran; Singh, Hardeep

2011-07-27

Successful subspecialty referrals require considerable coordination and interactive communication among the primary care provider (PCP), the subspecialist, and the patient, which may be challenging in the outpatient setting. Even when referrals are facilitated by electronic health records (EHRs) (i.e., e-referrals), lapses in patient follow-up might occur. Although compelling reasons exist why referral coordination should be improved, little is known about which elements of the complex referral coordination process should be targeted for improvement. Using Okhuysen & Bechky's coordination framework, this paper aims to understand the barriers, facilitators, and suggestions for improving communication and coordination of EHR-based referrals in an integrated healthcare system. We conducted a qualitative study to understand coordination breakdowns related to e-referrals in an integrated healthcare system and examined work-system factors that affect the timely receipt of subspecialty care. We conducted interviews with seven subject matter experts and six focus groups with a total of 30 PCPs and subspecialists at two tertiary care Department of Veterans Affairs (VA) medical centers. Using techniques from grounded theory and content analysis, we identified organizational themes that affected the referral process. Four themes emerged: lack of an institutional referral policy, lack of standardization in certain referral procedures, ambiguity in roles and responsibilities, and inadequate resources to adapt and respond to referral requests effectively. Marked differences in PCPs' and subspecialists' communication styles and individual mental models of the referral processes likely precluded the development of a shared mental model to facilitate coordination and successful referral completion. Notably, very few barriers related to the EHR were reported. Despite facilitating information transfer between PCPs and subspecialists, e-referrals remain prone to coordination

Madrasah Culture Based Transformational Leadership Model

Directory of Open Access Journals (Sweden)

Nur Khoiri

2016-10-01

Full Text Available Leadership is the ability to influence, direct behavior, and have a particular expertise in the field of the group who want to achieve the goals. A dynamic organization requires transformational leadership model. A school principal as a leader at school aims to actualize good learning leadership. Leadership learning focuses on learning which components include curriculum, teaching and learning process, assessment, teacher assessment and development, good service in learning, and developing a learning community in schools based on organizational culture as value, assumption, belief evolved from the roots of member thought of the organization and believed by all members of the organization and implemented in everyday life that could give meaning Keywords: leadership, transformational leadership, headmaster, instructional leadership, organizational culture.

BredeQuery: Coordinate-Based Meta-analytic Search of Neuroscientific Literature from the SPM Environment

DEFF Research Database (Denmark)

Wilkowski, Bartlomiej; Szewczyk, Marcin Marek; Rasmussen, Peter Mondrup

2010-01-01

Query offers a direct link from SPM to the Brede Database coordinate-based search engine. BredeQuery is able to ‘grab’ brain location coordinates from the SPM windows and enter them as a query for the Brede Database. Moreover, results of the query can be displayed in a MATLAB window and/or exported directly...

Rectification of the ancient geographic coordinates in Ptolemy's Geographike Hyphegesis

Directory of Open Access Journals (Sweden)

C. Marx

2012-03-01

Full Text Available A multitude of the ancient places given by Ptolemy in his Geography (~150 AD are so far unknown. One of the main problems of their identification are the errors of the given ancient coordinates. The different kinds of errors are illustrated by examples. A new geodetic-statistical analysis method is described, by which groups of places with homogeneous systematic errors and places with gross errors can be determined. Based on a transformation function describing the systematic errors, presumable modern coordinates of unknown places can be computed. That, in conjunction with further information, can make possible their identification. A test of the analysis method is carried out on a complex simulated example and shows its practicability. The analysis method has been applied within an interdisciplinary research project on Ptolemy's Geography. Further developments of the method are imaginable to make it accessible for related data diagnostics.

Darboux coordinates and instanton corrections in projective superspace

Science.gov (United States)

Crichigno, P. Marcos; Jain, Dharmesh

2012-10-01

By demanding consistency of the Legendre transform construction of hyperkähler metrics in projective superspace, we derive the expression for the Darboux coordinates on the hyperkähler manifold. We apply these results to study the Coulomb branch moduli space of 4D, {N}=2 super-Yang-Mills theory (SYM) on {{{R}}^3}× {S^1} , recovering the results by GMN. We also apply this method to study the electric corrections to the moduli space of 5D, {N}=1 SYM on {{{R}}^3}× {T^2} and give the Darboux coordinates explicitly.

Monitoring of a Wind Turbine Rotor using a Multi-blade Coordinate Framework

OpenAIRE

Henriksen, Lars Christian; Niemann, Hans Henrik; Poulsen, Niels Kjølstad

2012-01-01

In this paper a method to detect asymmetric faults in a wind turbine rotor is presented. The paper describes how fault diagnosis using an observer-based residual generator approach is able to distinguish between the nominal and faulty case by the injection of e.g. a sinusoidal excitation signal into the system. In the case of a wind turbine, an excitation signal is automatically generated by the rotation of the rotor in a turbulent wind eld. Using the multi-blade coordinate transformation, th...

Numerical generation of boundary-fitted curvilinear coordinate systems for arbitrarily curved surfaces

International Nuclear Information System (INIS)

Takagi, T.; Miki, K.; Chen, B.C.J.; Sha, W.T.

1985-01-01

A new method is presented for numerically generating boundary-fitted coordinate systems for arbitrarily curved surfaces. The three-dimensional surface has been expressed by functions of two parameters using the geometrical modeling techniques in computer graphics. This leads to new quasi-one- and two-dimensional elliptic partial differential equations for coordinate transformation. Since the equations involve the derivatives of the surface expressions, the grids geneated by the equations distribute on the surface depending on its slope and curvature. A computer program GRID-CS based on the method was developed and applied to a surface of the second order, a torus and a surface of a primary containment vessel for a nuclear reactor. These applications confirm that GRID-CS is a convenient and efficient tool for grid generation on arbitrarily curved surfaces

A Variation on Uncertainty Principle and Logarithmic Uncertainty Principle for Continuous Quaternion Wavelet Transforms

Directory of Open Access Journals (Sweden)

Mawardi Bahri

2017-01-01

Full Text Available The continuous quaternion wavelet transform (CQWT is a generalization of the classical continuous wavelet transform within the context of quaternion algebra. First of all, we show that the directional quaternion Fourier transform (QFT uncertainty principle can be obtained using the component-wise QFT uncertainty principle. Based on this method, the directional QFT uncertainty principle using representation of polar coordinate form is easily derived. We derive a variation on uncertainty principle related to the QFT. We state that the CQWT of a quaternion function can be written in terms of the QFT and obtain a variation on uncertainty principle related to the CQWT. Finally, we apply the extended uncertainty principles and properties of the CQWT to establish logarithmic uncertainty principles related to generalized transform.

Lorentz transformations, sideways shift and massless spinning particles

Science.gov (United States)

Bolonek-Lasoń, K.; Kosiński, P.; Maślanka, P.

2017-06-01

Recently (Stone et al. (2015) [16]) the influence of the so called ;Wigner translations; (more generally-Lorentz transformations) on circularly polarized Gaussian packets (providing the solution to Maxwell equations in paraxial approximation) has been studied. It appears that, within this approximation, the Wigner translations have an effect of shifting the wave packet trajectory parallel to itself by an amount proportional to the photon helicity. It has been suggested that this shift may result from specific properties of the algebra of Poincare generators for massless particles. In the present letter we describe the general relation between transformation properties of electromagnetic field on quantum and classical levels. It allows for a straightforward derivation of the helicity-dependent transformation rules. We present also an elementary derivation of the formula for sideways shift based on classical Maxwell theory. Some comments are made concerning the generalization to higher helicities and the relation to the coordinate operator defined long time ago by Pryce.

Lorentz transformations, sideways shift and massless spinning particles

Directory of Open Access Journals (Sweden)

K. Bolonek-Lasoń

2017-06-01

Full Text Available Recently (Stone et al. (2015 [16] the influence of the so called “Wigner translations” (more generally-Lorentz transformations on circularly polarized Gaussian packets (providing the solution to Maxwell equations in paraxial approximation has been studied. It appears that, within this approximation, the Wigner translations have an effect of shifting the wave packet trajectory parallel to itself by an amount proportional to the photon helicity. It has been suggested that this shift may result from specific properties of the algebra of Poincare generators for massless particles. In the present letter we describe the general relation between transformation properties of electromagnetic field on quantum and classical levels. It allows for a straightforward derivation of the helicity-dependent transformation rules. We present also an elementary derivation of the formula for sideways shift based on classical Maxwell theory. Some comments are made concerning the generalization to higher helicities and the relation to the coordinate operator defined long time ago by Pryce.

Lorentz transformations, sideways shift and massless spinning particles

Energy Technology Data Exchange (ETDEWEB)

Bolonek-Lasoń, K. [Department of Statistical Methods, Faculty of Economics and Sociology (Poland); Kosiński, P. [Department of Computer Science, Faculty of Physics and Applied Informatics, University of Łódź, Pomorska 149/153, 90-236 Łódź (Poland); Maślanka, P., E-mail: pmaslan@uni.lodz.pl [Department of Computer Science, Faculty of Physics and Applied Informatics, University of Łódź, Pomorska 149/153, 90-236 Łódź (Poland)

2017-06-10

Recently (Stone et al. (2015) ) the influence of the so called “Wigner translations” (more generally-Lorentz transformations) on circularly polarized Gaussian packets (providing the solution to Maxwell equations in paraxial approximation) has been studied. It appears that, within this approximation, the Wigner translations have an effect of shifting the wave packet trajectory parallel to itself by an amount proportional to the photon helicity. It has been suggested that this shift may result from specific properties of the algebra of Poincare generators for massless particles. In the present letter we describe the general relation between transformation properties of electromagnetic field on quantum and classical levels. It allows for a straightforward derivation of the helicity-dependent transformation rules. We present also an elementary derivation of the formula for sideways shift based on classical Maxwell theory. Some comments are made concerning the generalization to higher helicities and the relation to the coordinate operator defined long time ago by Pryce.

Bilateral symmetry detection on the basis of Scale Invariant Feature Transform.

Directory of Open Access Journals (Sweden)

Habib Akbar

Full Text Available The automatic detection of bilateral symmetry is a challenging task in computer vision and pattern recognition. This paper presents an approach for the detection of bilateral symmetry in digital single object images. Our method relies on the extraction of Scale Invariant Feature Transform (SIFT based feature points, which serves as the basis for the ascertainment of the centroid of the object; the latter being the origin under the Cartesian coordinate system to be converted to the polar coordinate system in order to facilitate the selection symmetric coordinate pairs. This is followed by comparing the gradient magnitude and orientation of the corresponding points to evaluate the amount of symmetry exhibited by each pair of points. The experimental results show that our approach draw the symmetry line accurately, provided that the observed centroid point is true.

Ligand design for site-selective metal coordination: synthesis of transition-metal complexes with η{sup 6}-coordination of the central ring of anthracene

Energy Technology Data Exchange (ETDEWEB)

Karslyan, Eduard E.; Borissova, Alexandra O.; Perekalin, Dmitry S. [Nesmeyanov Institute of Organoelement Compounds, Russian Academy of Sciences, Moscow (Russian Federation)

2017-05-08

A polycyclic aromatic ligand for site-selective metal coordination was designed by using DFT calculations. The computational prediction was confirmed by experiments: 2,3,6,7-tetramethoxy-9,10-dimethylanthracene initially reacts with [(C{sub 5}H{sub 5})Ru(MeCN){sub 3}]BF{sub 4} to give the kinetic product with a [(C{sub 5}H{sub 5})Ru]{sup +} fragment coordinated at the terminal ring, which is then transformed into the thermodynamic product with coordination through the central ring. These isomeric complexes have markedly different UV/Vis spectra, which was explained by analysis of the frontier orbitals. At the same time, the calculations suggest that electrostatic interactions are mainly responsible for the site selectivity of the coordination. (copyright 2017 Wiley-VCH Verlag GmbH and Co. KGaA, Weinheim)

Coordinated Pitch & Torque Control of Large-Scale Wind Turbine Based on Pareto Eciency Analysis

DEFF Research Database (Denmark)

Lin, Zhongwei; Chen, Zhenyu; Wu, Qiuwei

2018-01-01

For the existing pitch and torque control of the wind turbine generator system (WTGS), further development on coordinated control is necessary to improve effectiveness for practical applications. In this paper, the WTGS is modeled as a coupling combination of two subsystems: the generator torque...... control subsystem and blade pitch control subsystem. Then, the pole positions in each control subsystem are adjusted coordinately to evaluate the controller participation and used as the objective of optimization. A two-level parameters-controllers coordinated optimization scheme is proposed and applied...... to optimize the controller coordination based on the Pareto optimization theory. Three solutions are obtained through optimization, which includes the optimal torque solution, optimal power solution, and satisfactory solution. Detailed comparisons evaluate the performance of the three selected solutions...

Phase-transformation and subgrain-deformation characteristics in a cobalt-based superalloy

International Nuclear Information System (INIS)

Benson, M.L.; Reetz, B.; Liaw, P.K.; Reimers, W.; Choo, H.; Brown, D.W.; Saleh, T.A.; Klarstrom, D.L.

2011-01-01

Research highlights: → The mechanical behavior of a cobalt-based superalloy was investigated. → Two diffraction techniques were used to study deformation mechanisms of materials. → In-situ neutron diffraction provides the volume-averaged information. → The peak-profile analysis reveals the information on a subgrain level. → The material exhibited a transformation texture for the HCP phase under loading. - Abstract: A complimentary set of experiments, in situ neutron diffraction and ex situ synchrotron X-ray diffraction, were used to study the phase-transformation and subgrain-deformation characteristics of a cobalt-based superalloy. The neutron diffraction indicated a strain-induced phase transformation in the cobalt-based superalloy under uniaxial tension and compression. The synchrotron X-ray diffraction revealed stacking-fault accumulation and twinning under the same loading conditions. The extent of transformation was found to be greater under tension than under compression. Tensile plastic strains below 2% were accommodated by the stacking-fault creation, while those greater than 2% were accommodated by the phase transformation. Twinning was found to be more active under compressive loading than under tensile loading.

Motion Intention Analysis-Based Coordinated Control for Amputee-Prosthesis Interaction

Directory of Open Access Journals (Sweden)

Fei Wang

2010-01-01

Full Text Available To study amputee-prosthesis (AP interaction, a novel reconfigurable biped robot was designed and fabricated. In homogeneous configuration, two identical artificial legs (ALs were used to simulate the symmetrical lower limbs of a healthy person. Linear inverted pendulum model combining with ZMP stability criterion was used to generate the gait trajectories of ALs. To acquire interjoint coordination for healthy gait, rate gyroscopes were mounted on CoGs of thigh and shank of both legs. By employing principal component analysis, the measured angular velocities were processed and the motion synergy was obtained in the final. Then, one of two ALs was replaced by a bionic leg (BL, and the biped robot was changed into heterogeneous configuration to simulate the AP coupling system. To realize symmetrical stable walking, master/slave coordinated control strategy is proposed. According to information acquired by gyroscopes, BL recognized the motion intention of AL and reconstructed its kinematic variables based on interjoint coordination. By employing iterative learning control, gait tracking of BL to AL was archived. Real environment robot walking experiments validated the correctness and effectiveness of the proposed scheme.

QR code-based non-linear image encryption using Shearlet transform and spiral phase transform

Science.gov (United States)

Kumar, Ravi; Bhaduri, Basanta; Hennelly, Bryan

2018-02-01

In this paper, we propose a new quick response (QR) code-based non-linear technique for image encryption using Shearlet transform (ST) and spiral phase transform. The input image is first converted into a QR code and then scrambled using the Arnold transform. The scrambled image is then decomposed into five coefficients using the ST and the first Shearlet coefficient, C1 is interchanged with a security key before performing the inverse ST. The output after inverse ST is then modulated with a random phase mask and further spiral phase transformed to get the final encrypted image. The first coefficient, C1 is used as a private key for decryption. The sensitivity of the security keys is analysed in terms of correlation coefficient and peak signal-to noise ratio. The robustness of the scheme is also checked against various attacks such as noise, occlusion and special attacks. Numerical simulation results are shown in support of the proposed technique and an optoelectronic set-up for encryption is also proposed.

Terahertz bandwidth all-optical Hilbert transformers based on long-period gratings.

Science.gov (United States)

Ashrafi, Reza; Azaña, José

2012-07-01

A novel, all-optical design for implementing terahertz (THz) bandwidth real-time Hilbert transformers is proposed and numerically demonstrated. An all-optical Hilbert transformer can be implemented using a uniform-period long-period grating (LPG) with a properly designed amplitude-only grating apodization profile, incorporating a single π-phase shift in the middle of the grating length. The designed LPG-based Hilbert transformers can be practically implemented using either fiber-optic or integrated-waveguide technologies. As a generalization, photonic fractional Hilbert transformers are also designed based on the same optical platform. In this general case, the resulting LPGs have multiple π-phase shifts along the grating length. Our numerical simulations confirm that all-optical Hilbert transformers capable of processing arbitrary optical signals with bandwidths well in the THz range can be implemented using feasible fiber/waveguide LPG designs.

MATILDA: A Military Laser Range Safety Tool Based on Probabilistic Risk Assessment (PRA) Techniques

Science.gov (United States)

2014-08-01

3 2.1 UK Need for a PRA-Based Approach ............................................................... 3 2.2 A Risk-Based Approach to...Figure 6: MATILDA Coordinate Transformations ....................................................... 22  Figure 7: Geocentric and MICS Coordinates...Star-Shaped Condition ................................................................................. 27  Figure 11: Points of Closest Approach

The Use of Continuous Wavelet Transform Based on the Fast Fourier Transform in the Analysis of Multi-channel Electrogastrography Recordings.

Science.gov (United States)

Komorowski, Dariusz; Pietraszek, Stanislaw

2016-01-01

This paper presents the analysis of multi-channel electrogastrographic (EGG) signals using the continuous wavelet transform based on the fast Fourier transform (CWTFT). The EGG analysis was based on the determination of the several signal parameters such as dominant frequency (DF), dominant power (DP) and index of normogastria (NI). The use of continuous wavelet transform (CWT) allows for better visible localization of the frequency components in the analyzed signals, than commonly used short-time Fourier transform (STFT). Such an analysis is possible by means of a variable width window, which corresponds to the scale time of observation (analysis). Wavelet analysis allows using long time windows when we need more precise low-frequency information, and shorter when we need high frequency information. Since the classic CWT transform requires considerable computing power and time, especially while applying it to the analysis of long signals, the authors used the CWT analysis based on the fast Fourier transform (FFT). The CWT was obtained using properties of the circular convolution to improve the speed of calculation. This method allows to obtain results for relatively long records of EGG in a fairly short time, much faster than using the classical methods based on running spectrum analysis (RSA). In this study authors indicate the possibility of a parametric analysis of EGG signals using continuous wavelet transform which is the completely new solution. The results obtained with the described method are shown in the example of an analysis of four-channel EGG recordings, performed for a non-caloric meal.

Transformer Temperature Measurment Using Optical Fiber Based Microbend Sensor

Directory of Open Access Journals (Sweden)

Deepika YADAV

2007-10-01

Full Text Available Breakdown of transformers proves to be very expensive and inconvenient because it takes a lot of time for their replacement. During breakdown the industry also incurs heavy losses because of stoppage in production line. A system for monitoring the temperature of transformers is required. Existing sensors cannot be used for monitoring the temperature of transformers because they are sensitive to electrical signals and can cause sparking which can trigger fire since there is oil in transformers cooling coils. Optical fibers are electrically inert so this system will prove to be ideal for this application. Results of investigations carried out by simulating a configuration of Optical Fiber Temperature Sensor for transformers based on microbending using Matlab as a simulation tool to evaluate the effectiveness of this sensor have been communicated through this manuscript. The results are in the form of graphs of intensity modulation vs. the temperature.

LOCATION ANALYSIS ON SMART HOUSE USING PROJECTIVE TRANSFORMATION

Directory of Open Access Journals (Sweden)

Galih Andi Pradana

2014-08-01

Full Text Available In this paper, a method of location analysis for smart house is proposed. The proposed method uses projective transformation to process the input from visual sensor for determining coordinate of resident and also the entire device inside the smart house. With a good calculated coordinate, each device function in the smart house can be optimized for the good of the resident. From the experiment results, the proposed method successfully maps all coordinates of any device in the smart house up to 81% accuracy.

Coordinate sensitive detectors based on microchannel plates

International Nuclear Information System (INIS)

Gruntman, M.A.

1984-01-01

Coordinate-sensitive detectors (CSD) on the basis of microchannel plates permit to determine in a digital form the coordinates of every recorded particle and they are used in different fields of physical experiment. The sensitive surface diameter of such detectors can reach 10 cm, and spatial resolution - 10 μm. In the review provided CSD with microchannel plates are classified according to the ways of coordinate determination, different types of the detectors, pecUliarities of their design and electron flowsheet are described. It is pointed out that there are reasons for introduction of CSD into practice of laboratory physical investigations in various fields, where the particle recorded is electron or is able to form a secondary electron. It is attributed to nuclear physics, physics of electron and atom collisions, optics, mass-spectrometry, electron microscopy, X-ray analysis, investigation of surfaces

Optimal Protection Coordination for Microgrid under Different Operating Modes

Directory of Open Access Journals (Sweden)

Ming-Ta Yang

2013-01-01

Full Text Available Significant consequences result when a microgrid is connected to a distribution system. This study discusses the impacts of bolted three-phase faults and bolted single line-to-ground faults on the protection coordination of a distribution system connected by a microgrid which operates in utility-only mode or in grid-connected mode. The power system simulation software is used to build the test system. The linear programming method is applied to optimize the coordination of relays, and the relays coordination simulation software is used to verify if the coordination time intervals (CTIs of the primary/backup relay pairs are adequate. In addition, this study also proposes a relays protection coordination strategy when the microgrid operates in islanding mode during a utility power outage. Because conventional CO/LCO relays are not capable of detecting high impedance fault, intelligent electrical device (IED combined with wavelet transformer and neural network is proposed to accurately detect high impedance fault and identify the fault phase.

A geometrically exact beam element based on the absolute nodal coordinate formulation

International Nuclear Information System (INIS)

Gerstmayr, Johannes; Matikainen, Marko K.; Mikkola, Aki M.

2008-01-01

In this study, Reissner's classical nonlinear rod formulation, as implemented by Simo and Vu-Quoc by means of the large rotation vector approach, is implemented into the framework of the absolute nodal coordinate formulation. The implementation is accomplished in the planar case accounting for coupled axial, bending, and shear deformation. By employing the virtual work of elastic forces similarly to Simo and Vu-Quoc in the absolute nodal coordinate formulation, the numerical results of the formulation are identical to those of the large rotation vector formulation. It is noteworthy, however, that the material definition in the absolute nodal coordinate formulation can differ from the material definition used in Reissner's beam formulation. Based on an analytical eigenvalue analysis, it turns out that the high frequencies of cross section deformation modes in the absolute nodal coordinate formulation are only slightly higher than frequencies of common shear modes, which are present in the classical large rotation vector formulation of Simo and Vu-Quoc, as well. Thus, previous claims that the absolute nodal coordinate formulation is inefficient or would lead to ill-conditioned finite element matrices, as compared to classical approaches, could be refuted. In the introduced beam element, locking is prevented by means of reduced integration of certain parts of the elastic forces. Several classical large deformation static and dynamic examples as well as an eigenvalue analysis document the equivalence of classical nonlinear rod theories and the absolute nodal coordinate formulation for the case of appropriate material definitions. The results also agree highly with those computed in commercial finite element codes

Towards successful coordination of electronic health record based-referrals: a qualitative analysis

Directory of Open Access Journals (Sweden)

Paul Lindsey A

2011-07-01

Full Text Available Abstract Background Successful subspecialty referrals require considerable coordination and interactive communication among the primary care provider (PCP, the subspecialist, and the patient, which may be challenging in the outpatient setting. Even when referrals are facilitated by electronic health records (EHRs (i.e., e-referrals, lapses in patient follow-up might occur. Although compelling reasons exist why referral coordination should be improved, little is known about which elements of the complex referral coordination process should be targeted for improvement. Using Okhuysen & Bechky's coordination framework, this paper aims to understand the barriers, facilitators, and suggestions for improving communication and coordination of EHR-based referrals in an integrated healthcare system. Methods We conducted a qualitative study to understand coordination breakdowns related to e-referrals in an integrated healthcare system and examined work-system factors that affect the timely receipt of subspecialty care. We conducted interviews with seven subject matter experts and six focus groups with a total of 30 PCPs and subspecialists at two tertiary care Department of Veterans Affairs (VA medical centers. Using techniques from grounded theory and content analysis, we identified organizational themes that affected the referral process. Results Four themes emerged: lack of an institutional referral policy, lack of standardization in certain referral procedures, ambiguity in roles and responsibilities, and inadequate resources to adapt and respond to referral requests effectively. Marked differences in PCPs' and subspecialists' communication styles and individual mental models of the referral processes likely precluded the development of a shared mental model to facilitate coordination and successful referral completion. Notably, very few barriers related to the EHR were reported. Conclusions Despite facilitating information transfer between PCPs and

Coordinating a Service Supply Chain under Arms Offset Program’s Intervention by Performance-Based Contracting

Directory of Open Access Journals (Sweden)

Yi-Kuei Lin

2016-01-01

Full Text Available This paper investigates a support service supply chain for coordinating with a local third-party logistics provider by arms offset program’s intervention and develops a performance-based contracting framework for the coordinating problem, which remains scarce in the literatures. The performance-based contracting framework evaluates payments and profits for the support service by a game-theoretical approach with principal-agent model. We prove that the proposed framework is an effective tool in acquiring the balance between maximum profit and minimum payment for both parties in the coordinating problem without moral hazard issue. A numerical study consolidates the formulated schemes as contracting preference for both parties’ decision with a higher profit margin at a lower customer’s payment.

Phase difference estimation method based on data extension and Hilbert transform

International Nuclear Information System (INIS)

Shen, Yan-lin; Tu, Ya-qing; Chen, Lin-jun; Shen, Ting-ao

2015-01-01

To improve the precision and anti-interference performance of phase difference estimation for non-integer periods of sampling signals, a phase difference estimation method based on data extension and Hilbert transform is proposed. Estimated phase difference is obtained by means of data extension, Hilbert transform, cross-correlation, auto-correlation, and weighted phase average. Theoretical analysis shows that the proposed method suppresses the end effects of Hilbert transform effectively. The results of simulations and field experiments demonstrate that the proposed method improves the anti-interference performance of phase difference estimation and has better performance of phase difference estimation than the correlation, Hilbert transform, and data extension-based correlation methods, which contribute to improving the measurement precision of the Coriolis mass flowmeter. (paper)

An anatomically oriented breast coordinate system for mammogram analysis

DEFF Research Database (Denmark)

Brandt, Sami; Karemore, Gopal; Karssemeijer, Nico

2011-01-01

and the shape of the breast boundary because these are the most robust features independent of the breast size and shape. On the basis of these landmarks, we have constructed a nonlinear mapping between the parameter frame and the breast region in the mammogram. This mapping makes it possible to identify...... the corresponding positions and orientations among all of the ML or MLO mammograms, which facilitates an implicit use of the registration, i.e., no explicit image warping is needed. We additionally show how the coordinate transform can be used to extract Gaussian derivative features so that the feature positions...... and orientations are registered and extracted without non-linearly deforming the images. We use the proposed breast coordinate transform in a cross-sectional breast cancer risk assessment study of 490 women, in which we attempt to learn breast cancer risk factors from mammograms that were taken prior to when...

Transformational and Transactional Leadership: Association With Attitudes Toward Evidence-Based Practice

Science.gov (United States)

Aarons, Gregory A.

2006-01-01

Objective Leadership in organizations is important in shaping workers’ perceptions, responses to organizational change, and acceptance of innovations, such as evidence-based practices. Transformational leadership inspires and motivates followers, whereas transactional leadership is based more on reinforcement and exchanges. Studies have shown that in youth and family service organizations, mental health providers’ attitudes toward adopting an evidence-based practice are associated with organizational context and individual provider differences. The purpose of this study was to expand these findings by examining the association between leadership and mental health providers’ attitudes toward adopting evidence-based practice. Methods Participants were 303 public-sector mental health service clinicians and case managers from 49 programs who were providing mental health services to children, adolescents, and their families. Data were gathered on providers’ characteristics, attitudes toward evidence-based practices, and perceptions of their supervisors’ leadership behaviors. Zero-order correlations and multilevel regression analyses were conducted that controlled for effects of service providers’ characteristics. Results Both transformational and transactional leadership were positively associated with providers’ having more positive attitudes toward adoption of evidence-based practice, and transformational leadership was negatively associated with providers’ perception of difference between the providers’ current practice and evidence-based practice. Conclusions Mental health service organizations may benefit from improving transformational and transactional supervisory leadership skills in preparation for implementing evidence-based practices. PMID:16870968

Hybrid fast Hankel transform implementation for optics simulation

Science.gov (United States)

Davis, Paul K.

2013-09-01

The most compute intensive part of a full optics simulation, especially including diffraction effects, is the Fourier transform between pupil and image spaces. This is typically performed as a two dimensional fast discrete transform. For a nearly radially symmetric system there are advantages to using polar coordinates, in which case the radial transform becomes a Hankel transform, using Bessel functions instead of circular functions. However, there are special difficulties in calculating and handling Bessel functions. Several solutions have been proposed. We present a hybrid Hankel transform which divides the domain, calculating a portion using Bessel function approximations but converting most of the domain into a one dimensional Fourier transform which can be handled by standard methods.

Discrimination Between Inrush and Short Circuit Currents in Differential Protection of Power Transformer Based on Correlation Method Using the Wavelet Transform

OpenAIRE

M. Rasoulpoor; M. Banejad; A. Ahmadyfard

2011-01-01

This paper presents a novel technique for transformer differential protection to prevent incorrect operation due to inrush current. The proposed method in this paper is based on time-frequency transform known as the Wavelet transform. The discrete Wavelet transform is used for analysis the differential current signals in time and frequency domains. The investigation on the energy distribution of the signal on the discrete Wavelet transform components shows the difference distribution between ...

Syntheses, structures, and photoluminescence of lanthanide coordination polymers based on 4-oxo-1,4-dihydro-2,6-pyridinedicarboxylic acid

Energy Technology Data Exchange (ETDEWEB)

Qian, Jing; Li, Lei; Peng, Jing-Wei; Qiao, Wei-Wei; Sun, Mei-Mei [College of Chemistry, Tianjin Normal University, Tianjin (China); Gu, Wen [College of Chemistry, Nankai University, Tianjin (China)

2018-03-15

Investigating the coordination chemistry of H{sub 2}CDA (4-oxo-1,4-dihydro-2,6-pyridinedicarboxylic acid) with rare earth salts Ln(NO{sub 3}){sub 3} under hydrothermal conditions, structure transformation phenomenon was observed. The ligand, H{sub 2}CDA charged to its position isomer, enol type structure, H{sub 3}CAM (4-hydroxypyridine-2,6-dicarboxylic acid). Six new lanthanide(III) coordination polymers with the formulas [Ln(CAM)(H{sub 2}O){sub 3}]{sub n} [Ln = La (1), Pr, (2)] and {[Ln(CAM)(H_2O)_3].H_2O}{sub n} [Ln = Nd, (3), Sm, (4), Eu, (5), Y, (6)] were synthesized and characterized. The X-ray structure analyses show two kinds of coordination structures. The complexes 1 and 2 and 3-6 are isostructural. Complexes 1 and 2 crystallize in the monoclinic C{sub 2}/c space group, whereas 3-6 crystallize in the monoclinic system with space group P2{sub 1}/n. In the two kinds of structures, H{sub 3}CAM displays two different coordination modes. The Sm{sup III} and Eu{sup III} complexes exhibit the corresponding characteristic luminescence in the visible region at an excitation of 376 nm. (copyright 2018 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Comparison study on transformation of iron oxyhydroxides: Based on theoretical and experimental data

International Nuclear Information System (INIS)

Lu Bin; Guo Hui; Li Ping; Liu Hui; Wei Yu; Hou Denglu

2011-01-01

We have investigated the catalytic transformation of ferrihydrite, feroxyhyte, and lepidocrocite in the presence of Fe(II). In this paper, the transformation from akaganeite and goethite to hematite in the presence of trace Fe(II) was studied in detail. The result indicates that trace Fe(II) can accelerate the transformation of akaganeite and goethite. Compared with the transformation of other iron oxyhydroxides (e.g., ferrihydrite, feroxyhyte, lepidocrocite, and akaganeite), a complete transformation from goethite to hematite was not observed in the presence of Fe(II). On the basis of our earlier and present experimental results, the transformation of various iron oxyhydroxides was compared based on their thermodynamic stability, crystalline structure, transformation mechanism, and transformation time. - Graphical abstract: The transformation of various iron oxyhydroxides in the presence of trace Fe(II) was compared based on experimental results, thermodynamic stability, crystalline structure, and transformation mechanism. Highlights: → Fe(II) can accelerate the transformation from akaganeite to hematite. → Small particles of goethite can transform to hematite in the presence of Fe(II). → Some hematite particles were found to be embedded within the crystal of goethite. → The relationship between structure and transformation mechanism was revealed.

Fourier transforms in radar and signal processing

CERN Document Server

Brandwood, David

2011-01-01

Fourier transforms are used widely, and are of particular value in the analysis of single functions and combinations of functions found in radar and signal processing. Still, many problems that could have been tackled by using Fourier transforms may have gone unsolved because they require integration that is difficult and tedious. This newly revised and expanded edition of a classic Artech House book provides you with an up-to-date, coordinated system for performing Fourier transforms on a wide variety of functions. Along numerous updates throughout the book, the Second Edition includes a crit

General method for designing wave shape transformers.

Science.gov (United States)

Ma, Hua; Qu, Shaobo; Xu, Zhuo; Wang, Jiafu

2008-12-22

An effective method for designing wave shape transformers (WSTs) is investigated by adopting the coordinate transformation theory. Following this method, the devices employed to transform electromagnetic (EM) wave fronts from one style with arbitrary shape and size to another style, can be designed. To verify this method, three examples in 2D spaces are also presented. Compared with the methods proposed in other literatures, this method offers the general procedure in designing WSTs, and thus is of great importance for the potential and practical applications possessed by such kinds of devices.

Invariant object recognition based on the generalized discrete radon transform

Science.gov (United States)

Easley, Glenn R.; Colonna, Flavia

2004-04-01

We introduce a method for classifying objects based on special cases of the generalized discrete Radon transform. We adjust the transform and the corresponding ridgelet transform by means of circular shifting and a singular value decomposition (SVD) to obtain a translation, rotation and scaling invariant set of feature vectors. We then use a back-propagation neural network to classify the input feature vectors. We conclude with experimental results and compare these with other invariant recognition methods.

Multirate-based fast parallel algorithms for 2-D DHT-based real-valued discrete Gabor transform.

Science.gov (United States)

Tao, Liang; Kwan, Hon Keung

2012-07-01

Novel algorithms for the multirate and fast parallel implementation of the 2-D discrete Hartley transform (DHT)-based real-valued discrete Gabor transform (RDGT) and its inverse transform are presented in this paper. A 2-D multirate-based analysis convolver bank is designed for the 2-D RDGT, and a 2-D multirate-based synthesis convolver bank is designed for the 2-D inverse RDGT. The parallel channels in each of the two convolver banks have a unified structure and can apply the 2-D fast DHT algorithm to speed up their computations. The computational complexity of each parallel channel is low and is independent of the Gabor oversampling rate. All the 2-D RDGT coefficients of an image are computed in parallel during the analysis process and can be reconstructed in parallel during the synthesis process. The computational complexity and time of the proposed parallel algorithms are analyzed and compared with those of the existing fastest algorithms for 2-D discrete Gabor transforms. The results indicate that the proposed algorithms are the fastest, which make them attractive for real-time image processing.

Radiative transfer equation for graded index medium in cylindrical and spherical coordinate systems

International Nuclear Information System (INIS)

Liu, L.H.; Zhang, L.; Tan, H.P.

2006-01-01

In graded index medium, the ray goes along a curved path determined by Fermat principle, and the curved ray-tracing is very difficult and complex. To avoid the complicated and time-consuming computation of curved ray trajectory, the methods not based on ray-tracing technique need to be developed for the solution of radiative transfer in graded index medium. For this purpose, in this paper the streaming operator along a curved ray trajectory in original radiative transfer equation for graded index medium is transformed and expressed in spatial and angular ordinates and the radiative transfer equation for graded index medium in cylindrical and spherical coordinate systems are derived. The conservative and the non-conservative forms of radiative transfer equation for three-dimensional graded index medium are given, which can be used as base equations to develop the numerical simulation methods, such as finite volume method, discrete ordinates method, and finite element method, for radiative transfer in graded index medium in cylindrical and spherical coordinate systems

N-aryl pyrrolo-tetrathiafulvalene based ligands: synthesis and metal coordination.

Science.gov (United States)

Balandier, Jean-Yves; Chas, Marcos; Dron, Paul I; Goeb, Sébastien; Canevet, David; Belyasmine, Ahmed; Allain, Magali; Sallé, Marc

2010-03-05

A straightforward general synthetic access to N-aryl-1,3-dithiolo[4,5-c]pyrrole-2-thione derivatives 6 from acetylenedicarbaldehyde monoacetal is depicted. In addition to their potentiality as precursors to dithioalkyl-pyrrole derivatives, thiones 6 are key building blocks to N-aryl monopyrrolo-tetrathiafulvalene (MPTTF) derivatives 10. X-ray structures of four of these thiones intermediates, reminiscent of the corresponding MPTTF derivatives, are provided. When the aryl group is a binding pyridyl unit, the MPTTF derivative 10a can coordinate M(II) salts (M = Pt, Pd). The first examples of metal-directed orthogonal MPTTF-based dimers 11-14, obtained through coordination of 10a to cis-blocked square planar Pt or Pd complexes are described. Studies on the parameters influencing the dimer construction are presented, as well as first recognition properties of the resulting electron-rich clip for C(60).

The Need for Transformational Leadership in Singapore's School-Based Reform

Science.gov (United States)

Retna, Kala S.; Ng, Pak Tee

2009-01-01

In Singapore, "decentralization" and "school-based reforms" are key words within the current education reform agenda. This article argues that a key success factor in this agenda is transformational leadership in school. With more autonomy given to the school, transformational leadership at the school level will facilitate the…

Telehealth coordinators in hospital based telehealth services: Who are they and what do they do?

Science.gov (United States)

Edirippulige, Sisira; Armfield, Nigel R; Greenup, Phil; Bryett, Andrew

2016-12-01

Many studies have identified the importance of 'telehealth coordinators' for successful telehealth implementation and operation. However, little is known about the telehealth coordinators' functions, the skills and competencies required and the reasons for their influence. This study aimed to examine the key functions of telehealth coordinators in the Queensland public health system, their perceptions about their role, and the level of competencies to support this role. All telehealth coordinators within Queensland Health Telehealth Services were invited to complete a questionnaire. We collected: (i) demographic information; (ii) details of their telehealth work; and (iii) information about knowledge and skills relevant to their telehealth coordinator role. Eighteen of 20 (90%) participants completed and submitted the survey. Telehealth coordinators were responsible for a range of tasks relating to telehealth consultations, technical assistance, administration, research, promotion and marketing. Nearly all telehealth coordinators (n = 17, 94%) were confident in carrying out the tasks of their job. The majority of telehealth coordinators (n = 13, 72%) thought education and training relating to telehealth would help improve their job. The top three topics that telehealth coordinators were keen to learn about were: (i) examples of clinical use of telehealth; (ii) types of technologies used; and (iii) telehealth clinical and business models. Our participants were all hospital-based; as the use of telehealth is growing outside of the traditional hospital settings, the role of telehealth coordinators is likely to change. © The Author(s) 2016.

TP-model transformation-based-control design frameworks

CERN Document Server

Baranyi, Péter

2016-01-01

This book covers new aspects and frameworks of control, design, and optimization based on the TP model transformation and its various extensions. The author outlines the three main steps of polytopic and LMI based control design: 1) development of the qLPV state-space model, 2) generation of the polytopic model; and 3) application of LMI to derive controller and observer. He goes on to describe why literature has extensively studied LMI design, but has not focused much on the second step, in part because the generation and manipulation of the polytopic form was not tractable in many cases. The author then shows how the TP model transformation facilitates this second step and hence reveals new directions, leading to powerful design procedures and the formulation of new questions. The chapters of this book, and the complex dynamical control tasks which they cover, are organized so as to present and analyze the beneficial aspect of the family of approaches (control, design, and optimization). Additionally, the b...

Watermarking on 3D mesh based on spherical wavelet transform.

Science.gov (United States)

Jin, Jian-Qiu; Dai, Min-Ya; Bao, Hu-Jun; Peng, Qun-Sheng

2004-03-01

In this paper we propose a robust watermarking algorithm for 3D mesh. The algorithm is based on spherical wavelet transform. Our basic idea is to decompose the original mesh into a series of details at different scales by using spherical wavelet transform; the watermark is then embedded into the different levels of details. The embedding process includes: global sphere parameterization, spherical uniform sampling, spherical wavelet forward transform, embedding watermark, spherical wavelet inverse transform, and at last resampling the mesh watermarked to recover the topological connectivity of the original model. Experiments showed that our algorithm can improve the capacity of the watermark and the robustness of watermarking against attacks.

Molecular conformational analysis, vibrational spectra and normal coordinate analysis of trans-1,2-bis(3,5-dimethoxy phenyl)-ethene based on density functional theory calculations.

Science.gov (United States)

Joseph, Lynnette; Sajan, D; Chaitanya, K; Isac, Jayakumary

2014-03-25

The conformational behavior and structural stability of trans-1,2-bis(3,5-dimethoxy phenyl)-ethene (TDBE) were investigated by using density functional theory (DFT) method with the B3LYP/6-311++G(d,p) basis set combination. The vibrational wavenumbers of TDBE were computed at DFT level and complete vibrational assignments were made on the basis of normal coordinate analysis calculations (NCA). The DFT force field transformed to natural internal coordinates was corrected by a well-established set of scale factors that were found to be transferable to the title compound. The infrared and Raman spectra were also predicted from the calculated intensities. The observed Fourier transform infrared (FTIR) and Fourier transform (FT) Raman vibrational wavenumbers were analyzed and compared with the theoretically predicted vibrational spectra. Comparison of the simulated spectra with the experimental spectra provides important information about the ability of the computational method to describe the vibrational modes. Information about the size, shape, charge density distribution and site of chemical reactivity of the molecules has been obtained by mapping electron density isosurface with electrostatic potential surfaces (ESP). Copyright © 2013 Elsevier B.V. All rights reserved.

A survey and comparison of transformation tools based on the transformation tool contest

NARCIS (Netherlands)

Jakumeit, E.; Van Gorp, P.; Buchwald, S.; Rose, L.; Wagelaar, D.; Dan, L.; Hegedüs, Á; Hermannsdörfer, M.; Horn, T.; Kalnina, E.; Krause, C.; Lano, K.; Lepper, M.; Rensink, Arend; Rose, L.M.; Wätzoldt, S.; Mazanek, S.

Model transformation is one of the key tasks in model-driven engineering and relies on the efficient matching and modification of graph-based data structures; its sibling graph rewriting has been used to successfully model problems in a variety of domains. Over the last years, a wide range of graph

Mussel-inspired histidine-based transient network metal coordination hydrogels

Science.gov (United States)

Fullenkamp, Dominic E.; He, Lihong; Barrett, Devin G.; Burghardt, Wesley R.; Messersmith, Phillip B.

2013-01-01

Transient network hydrogels cross-linked through histidine-divalent cation coordination bonds were studied by conventional rheologic methods using histidine-modified star poly(ethylene glycol) (PEG) polymers. These materials were inspired by the mussel, which is thought to use histidine-metal coordination bonds to impart self-healing properties in the mussel byssal thread. Hydrogel viscoelastic mechanical properties were studied as a function of metal, pH, concentration, and ionic strength. The equilibrium metal-binding constants were determined by dilute solution potentiometric titration of monofunctional histidine-modified methoxy-PEG and were found to be consistent with binding constants of small molecule analogs previously studied. pH-dependent speciation curves were then calculated using the equilibrium constants determined by potentiometric titration, providing insight into the pH dependence of histidine-metal ion coordination and guiding the design of metal coordination hydrogels. Gel relaxation dynamics were found to be uncorrelated with the equilibrium constants measured, but were correlated to the expected coordination bond dissociation rate constants. PMID:23441102

77 FR 38705 - Draft Specification for Airport Light Bases, Transformer Housings, Junction Boxes, and...

Science.gov (United States)

2012-06-28

... Bases, Transformer Housings, Junction Boxes, and Accessories, Advisory Circular 150/5345- 42G..., Transformer Housings, Junction Boxes, and Accessories Airport Design'' Advisory Circular, AC 150/5345-42G. The Advisory Circular provides standards and recommendations for airport light bases, transformer housings...

Rotation associated with product of two Lorentz transformations

International Nuclear Information System (INIS)

Van Wyk, C.B.

1984-01-01

In the usual presentation of the Lorentz transformation there is an almost complete absence of the use of products of these transformations. One of the reasons for this appears to be the large amount of calculation involved when multi-plying the 4X4 matrices of the vector representation of the Lorentz transformation. In the article this problem is partly cleared up by using the coordinate free two-component spinor representation of rotations and Lorentz transformations. It is also shown that the theory derived in the article can be applied to Thomas precission in a very simple and direct way

Backstepping Based Formation Control of Quadrotors with the State Transformation Technique

Directory of Open Access Journals (Sweden)

Keun Uk Lee

2017-11-01

Full Text Available In this paper, a backstepping-based formation control of quadrotors with the state transformation technique is proposed. First, the dynamics of a quadrotor is derived by using the Newton–Euler formulation. Next, a backstepping-based formation control for quadrotors using a state transformation technique is presented. In the position control, which is the basis of formation control, it is possible to derive the reference attitude angles employing a state transformation technique without the small angle assumption or the simplified dynamics usually used. Stability analysis based on the Lyapunov theorem shows that the proposed formation controller can provide a quadrotor formation error system that is asymptotically stabilized. Finally, we verify the performance of the proposed formation control method through comparison simulations.

Exploring the coordination change of vanadium and structure transformation of metavanadate MgV2O6 under high pressure

Science.gov (United States)

Tang, Ruilian; Li, Yan; Xie, Shengyi; Li, Nana; Chen, Jiuhua; Gao, Chunxiao; Zhu, Pinwen; Wang, Xin

2016-01-01

Raman spectroscopy, synchrotron angle-dispersive X-ray diffraction (ADXRD), first-principles calculations, and electrical resistivity measurements were carried out under high pressure to investigate the structural stability and electrical transport properties of metavanadate MgV2O6. The results have revealed the coordination change of vanadium ions (from 5+1 to 6) at around 4 GPa. In addition, a pressure-induced structure transformation from the C2/m phase to the C2 phase in MgV2O6 was detected above 20 GPa, and both phases coexisted up to the highest pressure. This structural phase transition was induced by the enhanced distortions of MgO6 octahedra and VO6 octahedra under high pressure. Furthermore, the electrical resistivity decreased with pressure but exhibited different slope for these two phases, indicating that the pressure-induced structural phase transitions of MgV2O6 was also accompanied by the obvious changes in its electrical transport behavior. PMID:27924843

Specialist participation in healthcare delivery transformation: influence of patient self-referral.

Science.gov (United States)

Aliu, Oluseyi; Sun, Gordon; Burke, James; Chung, Kevin C; Davis, Matthew M

2014-01-01

Improving coordination of care and containing healthcare costs are prominent goals of healthcare reform. Specialist involvement in healthcare delivery transformation efforts like Accountable Care Organizations (ACOs) is necessary to achieve these goals. However, patients’ self-referrals to specialists may undermine care coordination and incur unnecessary costs if patients frequently receive care from specialists not engaged in such healthcare delivery transformation efforts. Additionally, frequent self-referrals may also diminish the incentive for specialist participation in reform endeavors like ACOs to get access to a referral base. To examine recent national trends in self-referred new visits to specialists. A descriptive cross-sectional study of new ambulatory visits to specialists from 2000 to 2009 using data from the National Ambulatory Medical Care Survey. We calculated nationally representative estimates of the proportion of new specialist visits through self-referrals among Medicare and private insurance beneficiaries. We also estimated the nationally representative absolute number of self-referred new specialist visits among both groups of beneficiaries. Among Medicare and private insurance beneficiaries, self-referred visits declined from 32.2% (95% confidence interval [CI], 24.0%-40.4%) to 19.6% (95% CI, 13.9%-23.3%) and from 32.4% (95% CI, 27.9%-36.8%) to 24.1% (95% CI,18.8%-29.4%), respectively. Hence, at least 1 in 5 and 1 in 4 new visits to specialists among Medicare and private insurance beneficiaries, respectively, are self-referred. The current considerable rate of self-referred new specialist visits among both Medicare and private insurance beneficiaries may have adverse implications for organizations attempting to transform healthcare delivery with improved care coordination.

Process identification method based on the Z transformation

International Nuclear Information System (INIS)

Zwingelstein, G.

1968-01-01

A simple method is described for identifying the transfer function of a linear retard-less system, based on the inversion of the Z transformation of the transmittance using a computer. It is assumed in this study that the signals at the entrance and at the exit of the circuit considered are of the deterministic type. The study includes: the theoretical principle of the inversion of the Z transformation, details about programming simulation, and identification of filters whose degrees vary from the first to the fifth order. (authors) [fr

A fast identification algorithm for Box-Cox transformation based radial basis function neural network.

Science.gov (United States)

Hong, Xia

2006-07-01

In this letter, a Box-Cox transformation-based radial basis function (RBF) neural network is introduced using the RBF neural network to represent the transformed system output. Initially a fixed and moderate sized RBF model base is derived based on a rank revealing orthogonal matrix triangularization (QR decomposition). Then a new fast identification algorithm is introduced using Gauss-Newton algorithm to derive the required Box-Cox transformation, based on a maximum likelihood estimator. The main contribution of this letter is to explore the special structure of the proposed RBF neural network for computational efficiency by utilizing the inverse of matrix block decomposition lemma. Finally, the Box-Cox transformation-based RBF neural network, with good generalization and sparsity, is identified based on the derived optimal Box-Cox transformation and a D-optimality-based orthogonal forward regression algorithm. The proposed algorithm and its efficacy are demonstrated with an illustrative example in comparison with support vector machine regression.

Coordinating a multi-retailer decentralized distribution system with random demand based on buyback and compensation contracts

Directory of Open Access Journals (Sweden)

Jinyu Ren

2015-01-01

Full Text Available Purpose: The purpose of this paper is to set up the coordinating mechanism for a decentralized distribution system consisting of a manufacturer and multiple independent retailers by means of contracts. It is in the two-stage supply chain system that all retailers sell an identical product made by the manufacturer and determine their order quantities which directly affect the expected profit of the supply chain with random demand. Design/methodology/approach: First comparison of the optimal order quantities in the centralized and decentralized system shows that the supply chain needs coordination. Then the coordination model is given based on buyback cost and compensation benefit. Finally the coordination mechanism is set up in which the manufacturer as the leader uses a buyback policy to incentive these retailers and the retailers pay profit returns to compensate the manufacturer. Findings: The results of a numerical example show that the perfect supply chain coordination and the flexible allocation of the profit can be achieved in the multi-retailer supply chain by the buyback and compensation contracts. Research limitations: The results based on assumptions might not completely hold in practice and the paper only focuses on studying a single product in two-stage supply chain. Practical implications: The coordination mechanism is applicable to a realistic supply chain under a private information setting and the research results is the foundation of further developing the coordination mechanism for a realistic multi-stage supply chain system with more products. Originality/value: This paper focused on studying the coordination mechanism for a decentralized multi-retailer supply chain by the joint application of the buyback and compensation contracts. Furthermore the perfect supply chain coordination and the flexible allocation of the profit are achieved.

Dissociating object-based from egocentric transformations in mental body rotation: effect of stimuli size.

Science.gov (United States)

Habacha, Hamdi; Moreau, David; Jarraya, Mohamed; Lejeune-Poutrain, Laure; Molinaro, Corinne

2018-01-01

The effect of stimuli size on the mental rotation of abstract objects has been extensively investigated, yet its effect on the mental rotation of bodily stimuli remains largely unexplored. Depending on the experimental design, mentally rotating bodily stimuli can elicit object-based transformations, relying mainly on visual processes, or egocentric transformations, which typically involve embodied motor processes. The present study included two mental body rotation tasks requiring either a same-different or a laterality judgment, designed to elicit object-based or egocentric transformations, respectively. Our findings revealed shorter response times for large-sized stimuli than for small-sized stimuli only for greater angular disparities, suggesting that the more unfamiliar the orientations of the bodily stimuli, the more stimuli size affected mental processing. Importantly, when comparing size transformation times, results revealed different patterns of size transformation times as a function of angular disparity between object-based and egocentric transformations. This indicates that mental size transformation and mental rotation proceed differently depending on the mental rotation strategy used. These findings are discussed with respect to the different spatial manipulations involved during object-based and egocentric transformations.

Improved l1-SPIRiT using 3D walsh transform-based sparsity basis.

Science.gov (United States)

Feng, Zhen; Liu, Feng; Jiang, Mingfeng; Crozier, Stuart; Guo, He; Wang, Yuxin

2014-09-01

l1-SPIRiT is a fast magnetic resonance imaging (MRI) method which combines parallel imaging (PI) with compressed sensing (CS) by performing a joint l1-norm and l2-norm optimization procedure. The original l1-SPIRiT method uses two-dimensional (2D) Wavelet transform to exploit the intra-coil data redundancies and a joint sparsity model to exploit the inter-coil data redundancies. In this work, we propose to stack all the coil images into a three-dimensional (3D) matrix, and then a novel 3D Walsh transform-based sparsity basis is applied to simultaneously reduce the intra-coil and inter-coil data redundancies. Both the 2D Wavelet transform-based and the proposed 3D Walsh transform-based sparsity bases were investigated in the l1-SPIRiT method. The experimental results show that the proposed 3D Walsh transform-based l1-SPIRiT method outperformed the original l1-SPIRiT in terms of image quality and computational efficiency. Copyright © 2014 Elsevier Inc. All rights reserved.

A heuristic derivation of Minkowski distance and Lorentz transformation

International Nuclear Information System (INIS)

Hassani, Sadri

2008-01-01

Students learn new abstract concepts best when these concepts are connected through a well-designed analogy, to familiar ideas. Since the concept of the relativistic spacetime distance is highly abstract, it would be desirable to connect it to the familiar Euclidean distance, but present the latter in such a way that it makes a transparent contact with the former. Starting with some intuitive and 'obvious' assumptions concerning distance in one dimension, we 'derive' the two-dimensional Euclidean distance between two points in terms of their coordinates. Then, assuming the invariance of this distance, we deduce the (familiar) two-dimensional orthogonal coordinate transformation. We present the derivation in such a way that the transition to spacetime becomes 'self-evident.' Thus, following exactly the same procedure, we derive the Minkowskian distance and the corresponding transformation that respects the invariance of that distance, i.e., the Lorentz transformation

INVESTIGATING SHAPE REPRESENTATION USING SENSITIVITY TO PART- AND AXIS-BASED TRANSFORMATIONS

OpenAIRE

Denisova, Kristina; Feldman, Jacob; Su, Xiaotao; Singh, Manish

2016-01-01

Part -and axis-based approaches organize shape representations in terms of simple parts and their spatial relationships. Shape transformations that alter qualitative part structure have been shown to be more detectable than those that preserve it. We compared sensitivity to various transformations that change quantitative properties of parts and their spatial relationships, while preserving qualitative part structure. Shape transformations involving changes in length, width, curvature, orient...

An improved Hough transform-based fingerprint alignment approach

CSIR Research Space (South Africa)

Mlambo, CS

2014-11-01

Full Text Available An improved Hough Transform based fingerprint alignment approach is presented, which improves computing time and memory usage with accurate alignment parameter (rotation and translation) results. This is achieved by studying the strengths...

Quantitative Comparison of Tolerance-Based Feature Transforms

NARCIS (Netherlands)

Reniers, Dennie; Telea, Alexandru

2006-01-01

Tolerance-based feature transforms (TFTs) assign to each pixel in an image not only the nearest feature pixels on the boundary (origins), but all origins from the minimum distance up to a user-defined tolerance. In this paper, we compare four simple-to-implement methods for computing TFTs for binary

A novel algorithm for discrimination between inrush current and internal faults in power transformer differential protection based on discrete wavelet transform

Energy Technology Data Exchange (ETDEWEB)

Eldin, A.A. Hossam; Refaey, M.A. [Electrical Engineering Department, Alexandria University, Alexandria (Egypt)

2011-01-15

This paper proposes a novel methodology for transformer differential protection, based on wave shape recognition of the discriminating criterion extracted of the instantaneous differential currents. Discrete wavelet transform has been applied to the differential currents due to internal fault and inrush currents. The diagnosis criterion is based on median absolute deviation (MAD) of wavelet coefficients over a specified frequency band. The proposed algorithm is examined using various simulated inrush and internal fault current cases on a power transformer that has been modeled using electromagnetic transients program EMTDC software. Results of evaluation study show that, proposed wavelet based differential protection scheme can discriminate internal faults from inrush currents. (author)

2D non-separable linear canonical transform (2D-NS-LCT) based cryptography

Science.gov (United States)

Zhao, Liang; Muniraj, Inbarasan; Healy, John J.; Malallah, Ra'ed; Cui, Xiao-Guang; Ryle, James P.; Sheridan, John T.

2017-05-01

The 2D non-separable linear canonical transform (2D-NS-LCT) can describe a variety of paraxial optical systems. Digital algorithms to numerically evaluate the 2D-NS-LCTs are not only important in modeling the light field propagations but also of interest in various signal processing based applications, for instance optical encryption. Therefore, in this paper, for the first time, a 2D-NS-LCT based optical Double-random- Phase-Encryption (DRPE) system is proposed which offers encrypting information in multiple degrees of freedom. Compared with the traditional systems, i.e. (i) Fourier transform (FT); (ii) Fresnel transform (FST); (iii) Fractional Fourier transform (FRT); and (iv) Linear Canonical transform (LCT), based DRPE systems, the proposed system is more secure and robust as it encrypts the data with more degrees of freedom with an augmented key-space.

Dielectric properties of transformer paper impregnated by mineral oil based magnetic fluid

International Nuclear Information System (INIS)

Timko, M; Marton, K; Tomco, L; Kopcansky, P; Koneracka, M

2010-01-01

The influence of combined magnetic and electric field on permittivity of transformer paper used in power transformers was observed. Transformer paper was impregnated by pure transformer oil ITO 100 and magnetic fluids based on transformer oil ITO 100 with different concentrations of magnetite nanoparticles. The measurements were carried out with help of high precision capacitance bridge. The electric intensity between circular planar electrodes was in the region of weak electric field (E > 10 6 V/m). The increase of electric permittivity of transformer paper impregnated by magnetic fluid opposite pure transformer paper was observed. The experiments showed that permittivity of insulator system consisting of pure transformer paper and impregnated transformer paper naturally depends on number of paper layers. The magnetodielectric effect was found to be dependent on magnetite nanoparticles concentration in magnetic fluids.

Global Ocean Circulation in Thermohaline Coordinates and Small-scale and Mesoscale mixing: An Inverse Estimate.

Science.gov (United States)

Groeskamp, S.; Zika, J. D.; McDougall, T. J.; Sloyan, B.

2016-02-01

I will present results of a new inverse technique that infers small-scale turbulent diffusivities and mesoscale eddy diffusivities from an ocean climatology of Salinity (S) and Temperature (T) in combination with surface freshwater and heat fluxes.First, the ocean circulation is represented in (S,T) coordinates, by the diathermohaline streamfunction. Framing the ocean circulation in (S,T) coordinates, isolates the component of the circulation that is directly related to water-mass transformation.Because water-mass transformation is directly related to fluxes of salt and heat, this framework allows for the formulation of an inverse method in which the diathermohaline streamfunction is balanced with known air-sea forcing and unknown mixing. When applying this inverse method to observations, we obtain observationally based estimates for both the streamfunction and the mixing. The results reveal new information about the component of the global ocean circulation due to water-mass transformation and its relation to surface freshwater and heat fluxes and small-scale and mesoscale mixing. The results provide global constraints on spatially varying patterns of diffusivities, in order to obtain a realistic overturning circulation. We find that mesoscale isopycnal mixing is much smaller than expected. These results are important for our understanding of the relation between global ocean circulation and mixing and may lead to improved parameterisations in numerical ocean models.

Explicitly computing geodetic coordinates from Cartesian coordinates

Science.gov (United States)

Zeng, Huaien

2013-04-01

This paper presents a new form of quartic equation based on Lagrange's extremum law and a Groebner basis under the constraint that the geodetic height is the shortest distance between a given point and the reference ellipsoid. A very explicit and concise formulae of the quartic equation by Ferrari's line is found, which avoids the need of a good starting guess for iterative methods. A new explicit algorithm is then proposed to compute geodetic coordinates from Cartesian coordinates. The convergence region of the algorithm is investigated and the corresponding correct solution is given. Lastly, the algorithm is validated with numerical experiments.

Lifting particle coordinate changes of magnetic moment type to Vlasov-Maxwell Hamiltonian dynamics

International Nuclear Information System (INIS)

Morrison, P. J.; Vittot, M.; Guillebon, L. de

2013-01-01

Techniques for coordinate changes that depend on both dependent and independent variables are developed and applied to the Maxwell-Vlasov Hamiltonian theory. Particle coordinate changes with a new velocity variable dependent on the magnetic field, with spatial coordinates unchanged, are lifted to the field theoretic level, by transforming the noncanonical Poisson bracket and Hamiltonian structure of the Vlasov-Maxwell dynamics. Several examples are given including magnetic coordinates, where the velocity is decomposed into components parallel and perpendicular to the local magnetic field, and the case of spherical velocity coordinates. An example of the lifting procedure is performed to obtain a simplified version of gyrokinetics, where the magnetic moment is used as a coordinate and the dynamics is reduced by elimination of the electric field energy in the Hamiltonian.

A framework of manufacturer-retailer coordination process

DEFF Research Database (Denmark)

Wong, Chee Yew; Johansen, John

2008-01-01

Purpose - Triggered by perceived inefficiency and inequality, buyers and suppliers coordinate with each other. The purpose of this paper is to develop a framework of coordination process based on theoretical review and verifications from three case studies. Design/methodology/approach - The appro......Purpose - Triggered by perceived inefficiency and inequality, buyers and suppliers coordinate with each other. The purpose of this paper is to develop a framework of coordination process based on theoretical review and verifications from three case studies. Design...... there was disagreement. Third, closer mode of coordination, which involved joint evaluation and derivation of coordination solutions, reduced the numbers of iterative coordination cycles. These empirical findings verified the presupposed framework of coordination process. Research limitations/implications - Three...... qualitative case studies may not be highly generalisable and multiple dyadic coordination processes may occur. However, the findings form a foundation for further understanding of the coordination process. Originality/value - The proposed framework of the coordination process further expands the theories...

Practical Aspects of Log-ratio Coordinate Representations in Regression with Compositional Response

Directory of Open Access Journals (Sweden)

Fišerová Eva

2016-10-01

Full Text Available Regression analysis with compositional response, observations carrying relative information, is an appropriate tool for statistical modelling in many scientific areas (e.g. medicine, geochemistry, geology, economics. Even though this technique has been recently intensively studied, there are still some practical aspects that deserve to be further analysed. Here we discuss the issue related to the coordinate representation of compositional data. It is shown that linear relation between particular orthonormal coordinates and centred log-ratio coordinates can be utilized to simplify the computation concerning regression parameters estimation and hypothesis testing. To enhance interpretation of regression parameters, the orthogonal coordinates and their relation with orthonormal and centred log-ratio coordinates are presented. Further we discuss the quality of prediction in different coordinate system. It is shown that the mean squared error (MSE for orthonormal coordinates is less or equal to the MSE for log-transformed data. Finally, an illustrative real-world example from geology is presented.

Optimal Coordinated Strategy Analysis for the Procurement Logistics of a Steel Group

Directory of Open Access Journals (Sweden)

Lianbo Deng

2014-01-01

Full Text Available This paper focuses on the optimization of an internal coordinated procurement logistics system in a steel group and the decision on the coordinated procurement strategy by minimizing the logistics costs. Considering the coordinated procurement strategy and the procurement logistics costs, the aim of the optimization model was to maximize the degree of quality satisfaction and to minimize the procurement logistics costs. The model was transformed into a single-objective model and solved using a simulated annealing algorithm. In the algorithm, the supplier of each subsidiary was selected according to the evaluation result for independent procurement. Finally, the effect of different parameters on the coordinated procurement strategy was analysed. The results showed that the coordinated strategy can clearly save procurement costs; that the strategy appears to be more cooperative when the quality requirement is not stricter; and that the coordinated costs have a strong effect on the coordinated procurement strategy.

Passivity-Based Control of a Class of Blondel-Park Transformable Electric Machines

Directory of Open Access Journals (Sweden)

Per J. Nicklasson

1997-10-01

Full Text Available In this paper we study the viability of extending, to the general rotating electric machine's model, the passivity-based controller method that we have developed for induction motors. In this approach the passivity (energy dissipation properties of the motor are taken advantage of at two different levels. First, we prove that the motor model can be decomposed as the feedback interconnection of two passive subsystems, which can essentially be identified with the electrical and mechanical dynamics. Then, we design a torque tracking controller that preserves passivity for the electrical subsystem, and leave the mechanical part as a "passive disturbance". In position or speed control applications this procedure naturally leads to the well known cascaded controller structure which is typically analyzed invoking time-scale separation assumptions. A key feature of the new cascaded control paradigm is that the latter arguments are obviated in the stability analysis. Our objective in this paper is to characterize a class of machines for which such a passivity-based controller solves the output feedback torque tracking problem. Roughly speaking, the class consists of machines whose nonactuated dynamics are well damped and whose electrical and mechanical dynamics can be suitably decoupled via a coordinate transformation. The first condition translates into the requirement of approximate knowledge of the rotor resistances to avoid the need of injecting high gain into the loop. The latter condition is known in the electric machines literature as Blondel-Park transformability, and in practical terms it requires that the air-gap magnetomotive force must be suitably approximated by the first harmonic in its Fourier expansion. These conditions, stemming from the construction of the machine, have a clear physical interpretation in terms of the couplings between its electrical, magnetic and mechanical dynamics, and are satisfied by a large number of practical

Spatial transformation-enabled electromagnetic devices: from radio frequencies to optical wavelengths

Science.gov (United States)

Jiang, Zhi Hao; Turpin, Jeremy P.; Morgan, Kennith; Lu, Bingqian; Werner, Douglas H.

2015-01-01

Transformation optics provides scientists and engineers with a new powerful design paradigm to manipulate the flow of electromagnetic waves in a user-defined manner and with unprecedented flexibility, by controlling the spatial distribution of the electromagnetic properties of a medium. Using this approach, over the past decade, various previously undiscovered physical wave phenomena have been revealed and novel electromagnetic devices have been demonstrated throughout the electromagnetic spectrum. In this paper, we present versatile theoretical and experimental investigations on designing transformation optics-enabled devices for shaping electromagnetic wave radiation and guidance, at both radio frequencies and optical wavelengths. Different from conventional coordinate transformations, more advanced and versatile coordinate transformations are exploited here to benefit diverse applications, thereby providing expanded design flexibility, enhanced device performance, as well as reduced implementation complexity. These design examples demonstrate the comprehensive capability of transformation optics in controlling electromagnetic waves, while the associated novel devices will open up new paths towards future integrated electromagnetic component synthesis and design, from microwave to optical spectral regimes. PMID:26217054

Spatial transformation-enabled electromagnetic devices: from radio frequencies to optical wavelengths.

Science.gov (United States)

Jiang, Zhi Hao; Turpin, Jeremy P; Morgan, Kennith; Lu, Bingqian; Werner, Douglas H

2015-08-28

Transformation optics provides scientists and engineers with a new powerful design paradigm to manipulate the flow of electromagnetic waves in a user-defined manner and with unprecedented flexibility, by controlling the spatial distribution of the electromagnetic properties of a medium. Using this approach, over the past decade, various previously undiscovered physical wave phenomena have been revealed and novel electromagnetic devices have been demonstrated throughout the electromagnetic spectrum. In this paper, we present versatile theoretical and experimental investigations on designing transformation optics-enabled devices for shaping electromagnetic wave radiation and guidance, at both radio frequencies and optical wavelengths. Different from conventional coordinate transformations, more advanced and versatile coordinate transformations are exploited here to benefit diverse applications, thereby providing expanded design flexibility, enhanced device performance, as well as reduced implementation complexity. These design examples demonstrate the comprehensive capability of transformation optics in controlling electromagnetic waves, while the associated novel devices will open up new paths towards future integrated electromagnetic component synthesis and design, from microwave to optical spectral regimes. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

Local structure information by EXAFS analysis using two algorithms for Fourier transform calculation

International Nuclear Information System (INIS)

Aldea, N; Pintea, S; Rednic, V; Matei, F; Hu Tiandou; Xie Yaning

2009-01-01

The present work is a comparison study between different algorithms of Fourier transform for obtaining very accurate local structure results using Extended X-ray Absorption Fine Structure technique. In this paper we focus on the local structural characteristics of supported nickel catalysts and Fe 3 O 4 core-shell nanocomposites. The radial distribution function could be efficiently calculated by the fast Fourier transform when the coordination shells are well separated while the Filon quadrature gave remarkable results for close-shell coordination.

Tile-based parallel coordinates and its application in financial visualization

Science.gov (United States)

Alsakran, Jamal; Zhao, Ye; Zhao, Xinlei

2010-01-01

Parallel coordinates technique has been widely used in information visualization applications and it has achieved great success in visualizing multivariate data and perceiving their trends. Nevertheless, visual clutter usually weakens or even diminishes its ability when the data size increases. In this paper, we first propose a tile-based parallel coordinates, where the plotting area is divided into rectangular tiles. Each tile stores an intersection density that counts the total number of polylines intersecting with that tile. Consequently, the intersection density is mapped to optical attributes, such as color and opacity, by interactive transfer functions. The method visualizes the polylines efficiently and informatively in accordance with the density distribution, and thus, reduces visual cluttering and promotes knowledge discovery. The interactivity of our method allows the user to instantaneously manipulate the tiles distribution and the transfer functions. Specifically, the classic parallel coordinates rendering is a special case of our method when each tile represents only one pixel. A case study on a real world data set, U.S. stock mutual fund data of year 2006, is presented to show the capability of our method in visually analyzing financial data. The presented visual analysis is conducted by an expert in the domain of finance. Our method gains the support from professionals in the finance field, they embrace it as a potential investment analysis tool for mutual fund managers, financial planners, and investors.

Synthesis and Structural Characterization of Magnesium Based Coordination Networks in Different Solvents

Energy Technology Data Exchange (ETDEWEB)

D Banerjee; J Finkelstein; A Smirnov; P Forster; L Borkowski; S Teat; J Parise

2011-12-31

Three magnesium based metal-organic frameworks, Mg{sub 3}(3,5-PDC){sub 3}(DMF){sub 3} {center_dot} DMF [1], Mg(3,5-PDC)(H{sub 2}O) {center_dot} (H{sub 2}O) [3], and Mg{sub 4}(3,5-PDC){sub 4}(DMF){sub 2}(H{sub 2}O){sub 2} {center_dot} 2DMF {center_dot} 4.5H{sub 2}O [4], and a 2-D coordination polymer, [Mg(3,5-PDC)(H{sub 2}O){sub 2}] [2] [PDC = pyridinedicarboxylate], were synthesized using a combination of DMF, methanol, ethanol, and water. Compound 1 [space group P2{sub 1}/n, a = 12.3475(5) {angstrom}, b = 11.1929(5) {angstrom}, c = 28.6734(12) {angstrom}, {beta} = 98.8160(10){sup o}, V = 3916.0(3) {angstrom}{sup 3}] consists of a combination of isolated and corner-sharing magnesium octahedra connected by the organic linkers to form a 3-D network with a 12.2 {angstrom} x 4.6 {angstrom} 1-D channel. The channel contains coordinated and free DMF molecules. In compound 2 [space group C2/c, a = 9.964(5) {angstrom}, b = 12.0694(6) {angstrom}, c = 7.2763(4) {angstrom}, {beta} = 106.4970(6){sup o}, V = 836.70(6) {angstrom}{sup 3}], PDC connects isolated seven coordinated magnesium polyhedra into a layered structure. Compound 3 [space group P6{sub 1}22, a = 11.479(1) {angstrom}, c = 14.735(3) {angstrom}, V = 1681.7(4) {angstrom}{sup 3}] (previously reported) contains isolated magnesium octahedra connected by the organic linker with each other forming a 3D network. Compound 4 [space group P2{sub 1}/c, a = 13.7442(14) {angstrom}, b = 14.2887(15) {angstrom}, c = 14.1178(14) {angstrom}, {beta} = 104.912(2){sup o}, V = 2679.2(5) {angstrom}{sup 3}] also exhibits a 3D network based on isolated magnesium octahedra with square cavities containing both disordered DMF and water molecules. The structural topologies originate due to the variable coordination ability of solvent molecules with the metal center. Water molecules coordinate with the magnesium metal centers preferably over other polar solvents (DMF, methanol, ethanol) used to synthesize the coordination networks. Despite

Coordinating patient care within radiology and across the enterprise.

Science.gov (United States)

McEnery, Kevin W

2014-12-01

For the practice of radiology, the transition to filmless imaging operations has resulted in a fundamental transition to more efficient clinical operations. In addition, the electronic delivery of diagnostic studies to the bedside has had a great impact on the care process throughout the health care enterprise. The radiology information system (RIS) has been at the core of the transition to filmless patient care. In a similar manner, the electronic medical record (EMR) is fundamentally and rapidly transforming the clinical enterprise into paperless/digital coordination of care. The widespread availability of EMR systems can be predicted to continue to increase the level of coordination of clinical care within the EMR framework. For the radiologist, readily available clinical information at the point of interpretation will continue to drive the evolution of the interpretation process, leading to improved patient outcomes. Regardless of practice size, efficient workflow processes are required to best leverage the functionality of IT systems. The radiologist should be aware of the scope of the RIS capabilities that allow for maximizing clinical benefit, and of the EMR system capabilities for improving = clinical imaging practice and care coordination across the enterprise. Radiology departments should be actively involved in forming practice patterns that allow efficient EMR-based clinical practice. This summary article is intended to assist radiologists in becoming active participants in the evolving role of both the RIS and EMR systems in coordinating efficient and effective delivery across the clinical enterprise. Copyright © 2014 American College of Radiology. Published by Elsevier Inc. All rights reserved.

29 CFR 42.8 - Coordination plan.

Science.gov (United States)

2010-07-01

... 29 Labor 1 2010-07-01 2010-07-01 true Coordination plan. 42.8 Section 42.8 Labor Office of the Secretary of Labor COORDINATED ENFORCEMENT § 42.8 Coordination plan. (a) Based upon, among other things, the... coordination plan concerning farm labor-related responsibilities of the Department, including migrant housing...

Crystallographically based model for transformation-induced plasticity in multiphase carbon steels

NARCIS (Netherlands)

Tjahjanto, D.D.; Turteltaub, S.; Suiker, A.S.J.

2007-01-01

The microstructure of multiphase steels assisted by transformation-induced plasticity consists of grains of retained austenite embedded in a ferrite-based matrix. Upon mechanical loading, retained austenite may transform into martensite, as a result of which plastic deformations are induced in the

Crystallographically based model for transformation-induced plasticity in multiphase carbon steels

NARCIS (Netherlands)

Tjahjanto, D.D.; Turteltaub, S.R.; Suiker, A.S.J.

2008-01-01

The microstructure of multiphase steels assisted by transformation-induced plasticity consists of grains of retained austenite embedded in a ferrite-based matrix. Upon mechanical loading, retained austenite may transform into martensite, as a result of which plastic deformations are induced in the

Competition: A Means to Transform the Defense Industrial Base

National Research Council Canada - National Science Library

Hansen, Richard

2003-01-01

.... The defense acquisition process and its industrial base comprise a significant economic institution in need of transformation to ensure that research, development, and acquisition efforts remain...

Transformation language integration based on profiles and higher order transformations

NARCIS (Netherlands)

Van Gorp, P.M.E.; Keller, A.; Janssens, D.; Gaševic, D.; Lämmel, R.; Van Wyk, Eric

2009-01-01

For about two decades, researchers have been constructing tools for applying graph transformations on large model transformation case studies. Instead of incrementally extending a common core, these competitive tool builders have repeatedly reconstructed mechanisms that were already supported by

Retrieval-based Face Annotation by Weak Label Regularized Local Coordinate Coding.

Science.gov (United States)

Wang, Dayong; Hoi, Steven C H; He, Ying; Zhu, Jianke; Mei, Tao; Luo, Jiebo

2013-08-02

Retrieval-based face annotation is a promising paradigm of mining massive web facial images for automated face annotation. This paper addresses a critical problem of such paradigm, i.e., how to effectively perform annotation by exploiting the similar facial images and their weak labels which are often noisy and incomplete. In particular, we propose an effective Weak Label Regularized Local Coordinate Coding (WLRLCC) technique, which exploits the principle of local coordinate coding in learning sparse features, and employs the idea of graph-based weak label regularization to enhance the weak labels of the similar facial images. We present an efficient optimization algorithm to solve the WLRLCC task. We conduct extensive empirical studies on two large-scale web facial image databases: (i) a Western celebrity database with a total of $6,025$ persons and $714,454$ web facial images, and (ii)an Asian celebrity database with $1,200$ persons and $126,070$ web facial images. The encouraging results validate the efficacy of the proposed WLRLCC algorithm. To further improve the efficiency and scalability, we also propose a PCA-based approximation scheme and an offline approximation scheme (AWLRLCC), which generally maintains comparable results but significantly saves much time cost. Finally, we show that WLRLCC can also tackle two existing face annotation tasks with promising performance.

Curriculum Transformation through Total Quality Management.

Science.gov (United States)

Edwards, Barbara; Algozzine, Bob

1995-01-01

Describes a massive cultural transformation project at two Charlotte, North Carolina, elementary schools that used Deming's total quality management principles to restructure curricula according to Boyer's eight commonalities of learning. Shows how the FADE (focus, analyze, develop, and execute) model was used to develop a well-coordinated,…

Study on time-varying velocity measurement with self-mixing laser diode based on Discrete Chirp-Fourier Transform

International Nuclear Information System (INIS)

Zhang Zhaoyun; Gao Yang; Zhao Xinghai; Zhao Xiang

2011-01-01

Laser's optical output power and frequency are modulated when the optical beam is back-scattered into the active cavity of the laser. By signal processing, the Doppler frequency can be acquired, and the target's velocity can be calculated. Based on these properties, an interferometry velocity sensor can be designed. When target move in time-varying velocity mode, it is difficult to extract the target's velocity. Time-varying velocity measurement by self-mixing laser diode is explored. A mathematics model was proposed for the time-varying velocity (invariable acceleration) measurement by self-mixing laser diode. Based on this model, a Discrete Chirp-Fourier Transform (DCFT) method was applied, DCFT is analogous to DFT. We show that when the signal length N is prime, the magnitudes of all the side lobes are 1, whereas the magnitudes of the main lobe is √N, And the coordinates of the main lobe shows the target's velocity and acceleration information. The simulation results prove the validity of the algorithm even in the situation of low SNR when N is prime.

Two-Stream Transformer Networks for Video-based Face Alignment.

Science.gov (United States)

Liu, Hao; Lu, Jiwen; Feng, Jianjiang; Zhou, Jie

2017-08-01

In this paper, we propose a two-stream transformer networks (TSTN) approach for video-based face alignment. Unlike conventional image-based face alignment approaches which cannot explicitly model the temporal dependency in videos and motivated by the fact that consistent movements of facial landmarks usually occur across consecutive frames, our TSTN aims to capture the complementary information of both the spatial appearance on still frames and the temporal consistency information across frames. To achieve this, we develop a two-stream architecture, which decomposes the video-based face alignment into spatial and temporal streams accordingly. Specifically, the spatial stream aims to transform the facial image to the landmark positions by preserving the holistic facial shape structure. Accordingly, the temporal stream encodes the video input as active appearance codes, where the temporal consistency information across frames is captured to help shape refinements. Experimental results on the benchmarking video-based face alignment datasets show very competitive performance of our method in comparisons to the state-of-the-arts.

Pyrolysis of Helical Coordination Polymers for Metal-Sulfide-Based Helices with Broadband Chiroptical Activity.

Science.gov (United States)

Hirai, Kenji; Yeom, Bongjun; Sada, Kazuki

2017-06-27

Fabrication of chiroptical materials with broadband response in the visible light region is vital to fully realize their potential applications. One way to achieve broadband chiroptical activity is to fabricate chiral nanostructures from materials that exhibit broadband absorption in the visible light region. However, the compounds used for chiroptical materials have predominantly been limited to materials with narrowband spectral response. Here, we synthesize Ag 2 S-based nanohelices derived from helical coordination polymers. The right- and left-handed coordination helices used as precursors are prepared from l- and d-glutathione with Ag + and a small amount of Cu 2+ . The pyrolysis of the coordination helices yields right- and left-handed helices of Cu 0.12 Ag 1.94 S/C, which exhibit chiroptical activity spanning the entire visible light region. Finite element method simulations substantiate that the broadband chiroptical activity is attributed to synergistic broadband light absorption and light scattering. Furthermore, another series of Cu 0.10 Ag 1.90 S/C nanohelices are synthesized by choosing the l- or d-Glu-Cys as starting materials. The pitch length of nanohelicies is controlled by changing the peptides, which alters their chiroptical properties. The pyrolysis of coordination helices enables one to fabricate helical Ag 2 S-based materials that enable broadband chiroptical activity but have not been explored owing to the lack of synthetic routes.

Market-Based Coordination and Auditing Mechanisms for Self-Interested Multi-Robot Systems

Science.gov (United States)

Ham, MyungJoo

2009-01-01

We propose market-based coordinated task allocation mechanisms, which allocate complex tasks that require synchronized and collaborated services of multiple robot agents to robot agents, and an auditing mechanism, which ensures proper behaviors of robot agents by verifying inter-agent activities, for self-interested, fully-distributed, and…

UNIFIED MODELS OF ELEMENTS OF POWER SUPPLY SYSTEMS BASED ON EQUATIONS IN PHASE COORDINATES

Directory of Open Access Journals (Sweden)

Yu.N. Vepryk

2015-12-01

Full Text Available Purpose. The models of electrical machines in the phase coordinates, the universal algorithm for the simulation of separate elements in a d-q coordinates system and in a phase-coordinates system are proposed. Methodology. Computer methods of investigation of transients in electrical systems are based on a compilation of systems of differential equations and their numerical integration solution methods. To solve differential equations an implicit method of numerical integration was chosen. Because it provides to complete structural simulation possibility: firstly developing models of separate elements and then forming a model of the complex system. For the mathematical simulation of electromagnetic transients in the elements of the electrical systems has been accepted the implicit Euler-Cauchy method, because it provides a higher precision and stability of the computing processes. Results. In developing the model elements identified two groups of elements: - Static elements and electrical machines in the d-q coordinates; - Rotating electrical machines in phase coordinates. As an example, the paper provides a model of synchronous and asynchronous electric machines in the d-q coordinates system and the phase coordinate system. The generalization algorithm and the unified notation form of equations of elements of an electrical system are obtained. It provides the possibility of using structural methods to develop a mathematical model of power systems under transient conditions. Practical value. In addition, the using of a computer model allows to implement multivariant calculations for research and study of factors affecting the quantitative characteristics of the transients.

3D seismic denoising based on a low-redundancy curvelet transform

International Nuclear Information System (INIS)

Cao, Jingjie; Zhao, Jingtao; Hu, Zhiying

2015-01-01

Contamination of seismic signal with noise is one of the main challenges during seismic data processing. Several methods exist for eliminating different types of noises, but optimal random noise attenuation remains difficult. Based on multi-scale, multi-directional locality of curvelet transform, the curvelet thresholding method is a relatively new method for random noise elimination. However, the high redundancy of a 3D curvelet transform makes its computational time and memory for massive data processing costly. To improve the efficiency of the curvelet thresholding denoising, a low-redundancy curvelet transform was introduced. The redundancy of the low-redundancy curvelet transform is approximately one-quarter of the original transform and the tightness of the original transform is also kept, thus the low-redundancy curvelet transform calls for less memory and computational resource compared with the original one. Numerical results on 3D synthetic and field data demonstrate that the low-redundancy curvelet denoising consumes one-quarter of the CPU time compared with the original curvelet transform using iterative thresholding denoising when comparable results are obtained. Thus, the low-redundancy curvelet transform is a good candidate for massive seismic denoising. (paper)

Wind turbine transformer admittance characterization based on online time-domain measurements and preliminary results from measurements done in two transformers using a SFRA

DEFF Research Database (Denmark)

Arana Aristi, Iván; Holbøll, Joachim; Nielsen, Arne Hejde

2009-01-01

This paper presents the analysis of online time-domain measurements on the primary and secondary side of a wind turbine transformer in an Offshore Wind Farm (OWF), during one switching operation realized in the collection grid. The frequency characteristics up to 10 kHz of the current and voltage...... signals of each phase were compared and the transformers admittance characteristic was estimated based on these measurements. Based on the results from the previous analysis, it was decided to acquire a Sweep Frequency Response Analyzer (SFRA) to realize detailed transformer measurements. First...... the results from the measurements in a small dry-type transformer under laboratory conditions are presented, and finally the results from a large transformer measured in a in an industrial setting are shown....

Small Modifications of Curvilinear Coordinates and Successive Approximations Applied in Geopotential Determination

Science.gov (United States)

Holota, P.; Nesvadba, O.

2016-12-01

The mathematical apparatus currently applied for geopotential determination is undoubtedly quite developed. This concerns numerical methods as well as methods based on classical analysis, equally as classical and weak solution concepts. Nevertheless, the nature of the real surface of the Earth has its specific features and is still rather complex. The aim of this paper is to consider these limits and to seek a balance between the performance of an apparatus developed for the surface of the Earth smoothed (or simplified) up to a certain degree and an iteration procedure used to bridge the difference between the real and smoothed topography. The approach is applied for the solution of the linear gravimetric boundary value problem in geopotential determination. Similarly as in other branches of engineering and mathematical physics a transformation of coordinates is used that offers a possibility to solve an alternative between the boundary complexity and the complexity of the coefficients of the partial differential equation governing the solution. As examples the use of modified spherical and also modified ellipsoidal coordinates for the transformation of the solution domain is discussed. However, the complexity of the boundary is then reflected in the structure of Laplace's operator. This effect is taken into account by means of successive approximations. The structure of the respective iteration steps is derived and analyzed. On the level of individual iteration steps the attention is paid to the representation of the solution in terms of function bases or in terms of Green's functions. The convergence of the procedure and the efficiency of its use for geopotential determination is discussed.

Overcurrent protection of transformers. Part 2: Traditional and new fusing philosophies for small and large transformers

Energy Technology Data Exchange (ETDEWEB)

Cook, C. J.; Niemira, J. K.

2003-07-01

New and traditional fusing philosophies for protecting transformers are discussed. This second in a two-part paper covers selection criteria for a transformer-primary fuse to protect the transformer consistent with industry-accepted through-fault protection curves. Also covered are the principles of coordination as they relate to the proper selection of the primary-side fuse and power fuses and the principles underlying the protection of load-side conductors and cables. The critical nature of secondary fault protection on small three-phase transformers used on industrial, commercial, and institutional power systems, as well as small-to-medium size three-phase power transformers used in utility substations is emphasized, in view of the long lead time and expense involved in replacing these transformers. In contrast, no special protection recommendations are made for small-kVA overhead distribution transformers, since they are not considered likely to experience secondary faults, and the rare faults that do occur will not likely be detected and cleared by the primary fuse. Also of importance is the fact that these transformers are inexpensive and readily available. Overall, large fuse rating, used in combination with a tank-mounted surge arrester is recommended, because it can provide better transformer protection than the smaller fuse ratings traditionally employed. 4 refs., 2 tabs., 4 figs.

Electrical-Based Diagnostic Techniques for Assessing Insulation Condition in Aged Transformers

Directory of Open Access Journals (Sweden)

Issouf Fofana

2016-08-01

Full Text Available The condition of the internal cellulosic paper and oil insulation are of concern for the performance of power transformers. Over the years, a number of methods have been developed to diagnose and monitor the degradation/aging of the transformer internal insulation system. Some of this degradation/aging can be assessed from electrical responses. Currently there are a variety of electrical-based diagnostic techniques available for insulation condition monitoring of power transformers. In most cases, the electrical signals being monitored are due to mechanical or electric changes caused by physical changes in resistivity, inductance or capacitance, moisture, contamination or aging by-products in the insulation. This paper presents a description of commonly used and modern electrical-based diagnostic techniques along with their interpretation schemes.

Photoactive devices including porphyrinoids with coordinating additives

Science.gov (United States)

Forrest, Stephen R; Zimmerman, Jeramy; Yu, Eric K; Thompson, Mark E; Trinh, Cong; Whited, Matthew; Diev, Vlacheslav

2015-05-12

Coordinating additives are included in porphyrinoid-based materials to promote intermolecular organization and improve one or more photoelectric characteristics of the materials. The coordinating additives are selected from fullerene compounds and organic compounds having free electron pairs. Combinations of different coordinating additives can be used to tailor the characteristic properties of such porphyrinoid-based materials, including porphyrin oligomers. Bidentate ligands are one type of coordinating additive that can form coordination bonds with a central metal ion of two different porphyrinoid compounds to promote porphyrinoid alignment and/or pi-stacking. The coordinating additives can shift the absorption spectrum of a photoactive material toward higher wavelengths, increase the external quantum efficiency of the material, or both.

A multi-dimensional Smolyak collocation method in curvilinear coordinates for computing vibrational spectra

International Nuclear Information System (INIS)

Avila, Gustavo; Carrington, Tucker

2015-01-01

In this paper, we improve the collocation method for computing vibrational spectra that was presented in Avila and Carrington, Jr. [J. Chem. Phys. 139, 134114 (2013)]. Using an iterative eigensolver, energy levels and wavefunctions are determined from values of the potential on a Smolyak grid. The kinetic energy matrix-vector product is evaluated by transforming a vector labelled with (nondirect product) grid indices to a vector labelled by (nondirect product) basis indices. Both the transformation and application of the kinetic energy operator (KEO) scale favorably. Collocation facilitates dealing with complicated KEOs because it obviates the need to calculate integrals of coordinate dependent coefficients of differential operators. The ideas are tested by computing energy levels of HONO using a KEO in bond coordinates

Monitoring of a Wind Turbine Rotor using a Multi-blade Coordinate Framework

DEFF Research Database (Denmark)

Henriksen, Lars Christian; Niemann, Hans Henrik; Poulsen, Niels Kjølstad

2012-01-01

into the system. In the case of a wind turbine, an excitation signal is automatically generated by the rotation of the rotor in a turbulent wind eld. Using the multi-blade coordinate transformation, the detection of asymmetries in the rotor of the wind turbine is greatly improved.......In this paper a method to detect asymmetric faults in a wind turbine rotor is presented. The paper describes how fault diagnosis using an observer-based residual generator approach is able to distinguish between the nominal and faulty case by the injection of e.g. a sinusoidal excitation signal...

Coordination-induced formation of nanometer-scale infinite coordination polymer at room temperature and conversion to CuO nanoparticles

Science.gov (United States)

Mohammadikish, Maryam; Zafari, Zohreh

2018-03-01

In this work, the construction of CuO nanoparticles semiconductor utilizing infinite coordination polymers (ICPs) as precursor was investigated. After successful functionalization of salpn (salpn = N,N‧-Bis(salicylidene)-1,3-propanediamine) ligand with sodium thioglycolate, bi-thioglycolate functionalized salpn linker was obtained, which was further transformed into Cu-ICP nanoparticles by simple precipitation method in the presence of Cu2+ cations. The mechanism of morphology evolution was illustrated by systematic time dependent studies, which demonstrated the preparation of Cu-ICP nanoparticles in shortest possible time, 5 min. Photoluminescence spectra show the emission quenching of the bi-thioglycolate functionalized salpn linker due to coordination to copper ion. In addition, the copper oxide nanoparticles are fabricated by thermal decomposition of the Cu-ICP precursor which showed larger band gap compared to bulk counterpart.

Fukunaga-Koontz transform based dimensionality reduction for hyperspectral imagery

Science.gov (United States)

Ochilov, S.; Alam, M. S.; Bal, A.

2006-05-01

Fukunaga-Koontz Transform based technique offers some attractive properties for desired class oriented dimensionality reduction in hyperspectral imagery. In FKT, feature selection is performed by transforming into a new space where feature classes have complimentary eigenvectors. Dimensionality reduction technique based on these complimentary eigenvector analysis can be described under two classes, desired class and background clutter, such that each basis function best represent one class while carrying the least amount of information from the second class. By selecting a few eigenvectors which are most relevant to desired class, one can reduce the dimension of hyperspectral cube. Since the FKT based technique reduces data size, it provides significant advantages for near real time detection applications in hyperspectral imagery. Furthermore, the eigenvector selection approach significantly reduces computation burden via the dimensionality reduction processes. The performance of the proposed dimensionality reduction algorithm has been tested using real-world hyperspectral dataset.

Coordinate-Based Clustering Method for Indoor Fingerprinting Localization in Dense Cluttered Environments

Directory of Open Access Journals (Sweden)

Wen Liu

2016-12-01

Full Text Available Indoor positioning technologies has boomed recently because of the growing commercial interest in indoor location-based service (ILBS. Due to the absence of satellite signal in Global Navigation Satellite System (GNSS, various technologies have been proposed for indoor applications. Among them, Wi-Fi fingerprinting has been attracting much interest from researchers because of its pervasive deployment, flexibility and robustness to dense cluttered indoor environments. One challenge, however, is the deployment of Access Points (AP, which would bring a significant influence on the system positioning accuracy. This paper concentrates on WLAN based fingerprinting indoor location by analyzing the AP deployment influence, and studying the advantages of coordinate-based clustering compared to traditional RSS-based clustering. A coordinate-based clustering method for indoor fingerprinting location, named Smallest-Enclosing-Circle-based (SEC, is then proposed aiming at reducing the positioning error lying in the AP deployment and improving robustness to dense cluttered environments. All measurements are conducted in indoor public areas, such as the National Center For the Performing Arts (as Test-bed 1 and the XiDan Joy City (Floors 1 and 2, as Test-bed 2, and results show that SEC clustering algorithm can improve system positioning accuracy by about 32.7% for Test-bed 1, 71.7% for Test-bed 2 Floor 1 and 73.7% for Test-bed 2 Floor 2 compared with traditional RSS-based clustering algorithms such as K-means.

Coordinate-Based Clustering Method for Indoor Fingerprinting Localization in Dense Cluttered Environments.

Science.gov (United States)

Liu, Wen; Fu, Xiao; Deng, Zhongliang

2016-12-02

Indoor positioning technologies has boomed recently because of the growing commercial interest in indoor location-based service (ILBS). Due to the absence of satellite signal in Global Navigation Satellite System (GNSS), various technologies have been proposed for indoor applications. Among them, Wi-Fi fingerprinting has been attracting much interest from researchers because of its pervasive deployment, flexibility and robustness to dense cluttered indoor environments. One challenge, however, is the deployment of Access Points (AP), which would bring a significant influence on the system positioning accuracy. This paper concentrates on WLAN based fingerprinting indoor location by analyzing the AP deployment influence, and studying the advantages of coordinate-based clustering compared to traditional RSS-based clustering. A coordinate-based clustering method for indoor fingerprinting location, named Smallest-Enclosing-Circle-based (SEC), is then proposed aiming at reducing the positioning error lying in the AP deployment and improving robustness to dense cluttered environments. All measurements are conducted in indoor public areas, such as the National Center For the Performing Arts (as Test-bed 1) and the XiDan Joy City (Floors 1 and 2, as Test-bed 2), and results show that SEC clustering algorithm can improve system positioning accuracy by about 32.7% for Test-bed 1, 71.7% for Test-bed 2 Floor 1 and 73.7% for Test-bed 2 Floor 2 compared with traditional RSS-based clustering algorithms such as K-means.

Model based analysis of piezoelectric transformers.

Science.gov (United States)

Hemsel, T; Priya, S

2006-12-22

Piezoelectric transformers are increasingly getting popular in the electrical devices owing to several advantages such as small size, high efficiency, no electromagnetic noise and non-flammable. In addition to the conventional applications such as ballast for back light inverter in notebook computers, camera flash, and fuel ignition several new applications have emerged such as AC/DC converter, battery charger and automobile lighting. These new applications demand high power density and wide range of voltage gain. Currently, the transformer power density is limited to 40 W/cm(3) obtained at low voltage gain. The purpose of this study was to investigate a transformer design that has the potential of providing higher power density and wider range of voltage gain. The new transformer design utilizes radial mode both at the input and output port and has the unidirectional polarization in the ceramics. This design was found to provide 30 W power with an efficiency of 98% and 30 degrees C temperature rise from the room temperature. An electro-mechanical equivalent circuit model was developed to describe the characteristics of the piezoelectric transformer. The model was found to successfully predict the characteristics of the transformer. Excellent matching was found between the computed and experimental results. The results of this study will allow to deterministically design unipoled piezoelectric transformers with specified performance. It is expected that in near future the unipoled transformer will gain significant importance in various electrical components.

75 FR 42376 - Proposed Information Collection; Comment Request; NTIA/FCC Web-based Frequency Coordination System

Science.gov (United States)

2010-07-21

... Information Collection; Comment Request; NTIA/FCC Web- based Frequency Coordination System AGENCY: National.... Abstract The National Telecommunications and Information Administration (NTIA) hosts a Web-based system...) bands that are shared on a co-primary basis by federal and non-federal users. The Web-based system...

Improving Computational Efficiency of Prediction in Model-Based Prognostics Using the Unscented Transform

Science.gov (United States)

Daigle, Matthew John; Goebel, Kai Frank

2010-01-01

Model-based prognostics captures system knowledge in the form of physics-based models of components, and how they fail, in order to obtain accurate predictions of end of life (EOL). EOL is predicted based on the estimated current state distribution of a component and expected profiles of future usage. In general, this requires simulations of the component using the underlying models. In this paper, we develop a simulation-based prediction methodology that achieves computational efficiency by performing only the minimal number of simulations needed in order to accurately approximate the mean and variance of the complete EOL distribution. This is performed through the use of the unscented transform, which predicts the means and covariances of a distribution passed through a nonlinear transformation. In this case, the EOL simulation acts as that nonlinear transformation. In this paper, we review the unscented transform, and describe how this concept is applied to efficient EOL prediction. As a case study, we develop a physics-based model of a solenoid valve, and perform simulation experiments to demonstrate improved computational efficiency without sacrificing prediction accuracy.

Neural network-based distributed attitude coordination control for spacecraft formation flying with input saturation.

Science.gov (United States)

Zou, An-Min; Kumar, Krishna Dev

2012-07-01

This brief considers the attitude coordination control problem for spacecraft formation flying when only a subset of the group members has access to the common reference attitude. A quaternion-based distributed attitude coordination control scheme is proposed with consideration of the input saturation and with the aid of the sliding-mode observer, separation principle theorem, Chebyshev neural networks, smooth projection algorithm, and robust control technique. Using graph theory and a Lyapunov-based approach, it is shown that the distributed controller can guarantee the attitude of all spacecraft to converge to a common time-varying reference attitude when the reference attitude is available only to a portion of the group of spacecraft. Numerical simulations are presented to demonstrate the performance of the proposed distributed controller.

Transformations to diagonal bases in closed-loop quantum learning control experiments

International Nuclear Information System (INIS)

Cardoza, David; Trallero-Herrero, Carlos; Langhojer, Florian; Rabitz, Herschel; Weinacht, Thomas

2005-01-01

This paper discusses transformations between bases used in closed-loop learning control experiments. The goal is to transform to a basis in which the number of control parameters is minimized and in which the parameters act independently. We demonstrate a simple procedure for testing whether a unitary linear transformation (i.e., a rotation amongst the control variables) is sufficient to reduce the search problem to a set of globally independent variables. This concept is demonstrated with closed-loop molecular fragmentation experiments utilizing shaped, ultrafast laser pulses

Wide-Area Robust Decentralized Coordinated Control of HVDC Power System Based on Polytopic System Theory

Directory of Open Access Journals (Sweden)

Shiyun Xu

2015-01-01

Full Text Available The present study proposes a hierarchical wide-area decentralized coordinated control framework for HVDC power system that is robust to multiple operating conditions. The upper level wide-area coordinated controller is designed in the form of dynamic output feedback control that coordinates the lower level HVDC supplementary controller, PSS, and SVC. In order to enhance the robustness of the designed controller under various operating conditions, the polytopic model is introduced such that the closed-loop control system can be operated under strong damping mode in virtue of the stability criterion based on damping ratio. Simulation results demonstrate that the proposed controller design algorithm is capable of enhancing the system damping over four different conditions.

Performance Evaluation of Frequency Transform Based Block Classification of Compound Image Segmentation Techniques

Science.gov (United States)

Selwyn, Ebenezer Juliet; Florinabel, D. Jemi

2018-04-01

Compound image segmentation plays a vital role in the compression of computer screen images. Computer screen images are images which are mixed with textual, graphical, or pictorial contents. In this paper, we present a comparison of two transform based block classification of compound images based on metrics like speed of classification, precision and recall rate. Block based classification approaches normally divide the compound images into fixed size blocks of non-overlapping in nature. Then frequency transform like Discrete Cosine Transform (DCT) and Discrete Wavelet Transform (DWT) are applied over each block. Mean and standard deviation are computed for each 8 × 8 block and are used as features set to classify the compound images into text/graphics and picture/background block. The classification accuracy of block classification based segmentation techniques are measured by evaluation metrics like precision and recall rate. Compound images of smooth background and complex background images containing text of varying size, colour and orientation are considered for testing. Experimental evidence shows that the DWT based segmentation provides significant improvement in recall rate and precision rate approximately 2.3% than DCT based segmentation with an increase in block classification time for both smooth and complex background images.

Time-temperature-transformation diagram of Zr-based Zr-Al-Cu-Ni metallic glasses

International Nuclear Information System (INIS)

Goh, T.T.; Li, Y.; Ng, S.C.

1996-01-01

The critical cooling rates R c for glass formation in four Zr-based Zr-Al-Cu-Ni alloys were determined using techniques developed by Uhlmann based on theories of homogeneous nucleation, crystal growth and transformation kinetics. It involves the construction of a time-temperature-transformation curve which requires the knowledge of the viscosity-temperature curve of the alloys. Two types of viscosity-temperature expressions, namely Andrade expression and Doolittle expression, were used to model the viscosity of the Zr-based alloys and the choice of the viscosity-temperature expression which gives the best estimate of the calculated time-temperature-transformation curve is discussed. (author)

Broadband Impedance Transformer Based on Asymmetric Coupled Transmission Lines in Nonhomogeneous Medium

DEFF Research Database (Denmark)

Zhurbenko, Vitaliy; Krozer, Viktor; Meincke, Peter

2007-01-01

A new broadband quarter-wavelength impedance transformer based on an asymmetric coupled line section is presented. The bandwidth of the coupled line transformer is extended with the help of an interconnecting transmission line. An analytical model for the transformer is developed. The analysis...... of the structure reveals that a fractional bandwidth of more than 100% at –20 dB reflection level can be achieved with such a structure. An experimental transformer circuit has been designed, fabricated and tested. Theoretical and experimental results are fair agreement and confirm the established theory...

Catalytic Transformation of Ethylbenzene over Y-Zeolite-based Catalysts

KAUST Repository

Al-Khattaf, Sulaiman

2008-01-01

Catalytic transformation of ethylbenzene (EB) has been investigated over ultrastable Y (USY)-zeolite-based catalysts in a novel riser simulator at different operating conditions. The effect of reaction conditions on EB conversion is reported

Piezoelectric transformer based power converters; design and control

DEFF Research Database (Denmark)

Rødgaard, Martin Schøler

The last two decades of research into piezoelectric transformer (PT) based power converters have led to some extensive improvements of the technology, but it still struggles to get its commercial success. This calls for further research and has been the subject of this work, in order to enable...

Towards discrete wavelet transform-based human activity recognition

Science.gov (United States)

Khare, Manish; Jeon, Moongu

2017-06-01

Providing accurate recognition of human activities is a challenging problem for visual surveillance applications. In this paper, we present a simple and efficient algorithm for human activity recognition based on a wavelet transform. We adopt discrete wavelet transform (DWT) coefficients as a feature of human objects to obtain advantages of its multiresolution approach. The proposed method is tested on multiple levels of DWT. Experiments are carried out on different standard action datasets including KTH and i3D Post. The proposed method is compared with other state-of-the-art methods in terms of different quantitative performance measures. The proposed method is found to have better recognition accuracy in comparison to the state-of-the-art methods.

Transformation of Values in Officership in the Civil-Military Interface

DEFF Research Database (Denmark)

Holsting, Vilhelm Stefan

2017-01-01

. The question is how those challenges affect the attitudes of the professional corps of officers toward the concept of officership? It is argued that the emergence of attitudes towards officership is highly complex. Based on discourse studies of performance evaluations of high-level officers from 1989 to 2014...... and an analytical concept - modes of coordination, inspired by French pragmatism - it is argued, that the attitudes of high-level officers have changed radically alongside transformations in the surrounding society. It is argued, that the values of officership has changed from patriarchal-industrial values...

Systems Thinking for Transformational Change in Health

Science.gov (United States)

Willis, Cameron D.; Best, Allan; Riley, Barbara; Herbert, Carol P.; Millar, John; Howland, David

2014-01-01

Incremental approaches to introducing change in Canada's health systems have not sufficiently improved the quality of services and outcomes. Further progress requires 'large system transformation', considered to be the systematic effort to generate coordinated change across organisations sharing a common vision and goal. This essay draws on…

The computer coordination method and research of inland river traffic based on ship database

Science.gov (United States)

Liu, Shanshan; Li, Gen

2018-04-01

A computer coordinated management method for inland river ship traffic is proposed in this paper, Get the inland ship's position, speed and other navigation information by VTS, building ship's statics and dynamic data bases, writing a program of computer coordinated management of inland river traffic by VB software, Automatic simulation and calculation of the meeting states of ships, Providing ship's long-distance collision avoidance information. The long-distance collision avoidance of ships will be realized. The results show that, Ships avoid or reduce meetings, this method can effectively control the macro collision avoidance of ships.

A Transform-Based Feature Extraction Approach for Motor Imagery Tasks Classification

Science.gov (United States)

Khorshidtalab, Aida; Mesbah, Mostefa; Salami, Momoh J. E.

2015-01-01

In this paper, we present a new motor imagery classification method in the context of electroencephalography (EEG)-based brain–computer interface (BCI). This method uses a signal-dependent orthogonal transform, referred to as linear prediction singular value decomposition (LP-SVD), for feature extraction. The transform defines the mapping as the left singular vectors of the LP coefficient filter impulse response matrix. Using a logistic tree-based model classifier; the extracted features are classified into one of four motor imagery movements. The proposed approach was first benchmarked against two related state-of-the-art feature extraction approaches, namely, discrete cosine transform (DCT) and adaptive autoregressive (AAR)-based methods. By achieving an accuracy of 67.35%, the LP-SVD approach outperformed the other approaches by large margins (25% compared with DCT and 6 % compared with AAR-based methods). To further improve the discriminatory capability of the extracted features and reduce the computational complexity, we enlarged the extracted feature subset by incorporating two extra features, namely, Q- and the Hotelling’s \\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{upgreek} \\usepackage{mathrsfs} \\setlength{\\oddsidemargin}{-69pt} \\begin{document} }{}$T^{2}$ \\end{document} statistics of the transformed EEG and introduced a new EEG channel selection method. The performance of the EEG classification based on the expanded feature set and channel selection method was compared with that of a number of the state-of-the-art classification methods previously reported with the BCI IIIa competition data set. Our method came second with an average accuracy of 81.38%. PMID:27170898

Magnetic Coordinate Systems

Science.gov (United States)

Laundal, K. M.; Richmond, A. D.

2017-03-01

Geospace phenomena such as the aurora, plasma motion, ionospheric currents and associated magnetic field disturbances are highly organized by Earth's main magnetic field. This is due to the fact that the charged particles that comprise space plasma can move almost freely along magnetic field lines, but not across them. For this reason it is sensible to present such phenomena relative to Earth's magnetic field. A large variety of magnetic coordinate systems exist, designed for different purposes and regions, ranging from the magnetopause to the ionosphere. In this paper we review the most common magnetic coordinate systems and describe how they are defined, where they are used, and how to convert between them. The definitions are presented based on the spherical harmonic expansion coefficients of the International Geomagnetic Reference Field (IGRF) and, in some of the coordinate systems, the position of the Sun which we show how to calculate from the time and date. The most detailed coordinate systems take the full IGRF into account and define magnetic latitude and longitude such that they are constant along field lines. These coordinate systems, which are useful at ionospheric altitudes, are non-orthogonal. We show how to handle vectors and vector calculus in such coordinates, and discuss how systematic errors may appear if this is not done correctly.

Molecular materials and devices: developing new functional systems based on the coordination chemistry approach

Directory of Open Access Journals (Sweden)

Toma Henrique E.

2003-01-01

Full Text Available At the onset of the nanotechnology age, molecular designing of materials and single molecule studies are opening wide possibilities of using molecular systems in electronic and photonic devices, as well as in technological applications based on molecular switching or molecular recognition. In this sense, inorganic chemists are privileged by the possibility of using the basic strategies of coordination chemistry to build up functional supramolecular materials, conveying the remarkable chemical properties of the metal centers and the characteristics of the ancillary ligands. Coordination chemistry also provides effective self-assembly strategies based on specific metal-ligand affinity and stereochemistry. Several molecular based materials, derived from inorganic and metal-organic compounds are focused on this article, with emphasis on new supramolecular porphyrins and porphyrazines, metal-clusters and metal-polyimine complexes. Such systems are also discussed in terms of their applications in catalysis, sensors and molecular devices.

Brønsted acid sites based on penta-coordinated aluminum species

Science.gov (United States)

Wang, Zichun; Jiang, Yijiao; Lafon, Olivier; Trébosc, Julien; Duk Kim, Kyung; Stampfl, Catherine; Baiker, Alfons; Amoureux, Jean-Paul; Huang, Jun

2016-12-01

Zeolites and amorphous silica-alumina (ASA), which both provide Brønsted acid sites (BASs), are the most extensively used solid acid catalysts in the chemical industry. It is widely believed that BASs consist only of tetra-coordinated aluminum sites (AlIV) with bridging OH groups in zeolites or nearby silanols on ASA surfaces. Here we report the direct observation in ASA of a new type of BAS based on penta-coordinated aluminum species (AlV) by 27Al-{1H} dipolar-mediated correlation two-dimensional NMR experiments at high magnetic field under magic-angle spinning. Both BAS-AlIV and -AlV show a similar acidity to protonate probe molecular ammonia. The quantitative evaluation of 1H and 27Al sites demonstrates that BAS-AlV co-exists with BAS-AlIV rather than replaces it, which opens new avenues for strongly enhancing the acidity of these popular solid acids.

Coordination Networks Based on Boronate and Benzoxaborolate Ligands

Directory of Open Access Journals (Sweden)

Saad Sene

2016-05-01

Full Text Available Despite the extensive range of investigations on boronic acids (R-B(OH2, some aspects of their reactivity still need to be explored. This is the case for the coordination chemistry of boronate anions (R-B(OH3−, which has only recently been started to be studied. The purpose of this review is to summarize some of the key features of boronate ligands (and of their cyclic derivatives, benzoxaborolates in materials: (i coordination properties; (ii spectroscopic signatures; and (iii emerging applications.

PLZT-based photovoltaic Piezoelectric Transformer with light feedback

Energy Technology Data Exchange (ETDEWEB)

Kozielski, L [University of Silesia, Dep. Materials Sc, 2, Sniezna St. Sosnowiec, 41-200 Poland (Poland); Adamczyk, M [University of Silesia, Institute Phys., 4, Uniwersytecka St. Katowice, 40-007 Poland (Poland); Erhart, J, E-mail: lucjan.kozielski@us.edu.pl [Technical University of Liberec, Studencka St. 2, CZ-461 17 Liberec (Czech Republic)

2011-10-29

Piezoelectric Transformer (PT) converts an electrical AC input voltage into ultrasonic vibrations and reconverts back to an output as AC voltage. Hard lead zirconate titanate (PZT) ceramics is typically used for fabrications of such devices. In case of lanthaniun ion La{sup 3+} addition in PZT solid solution we can achieve piezoelectric ceramics with good transparency exhibiting both optical Pockels and Kerr effects. Values of these coefficients in the PLZT system are much bigger than in LiNbO{sub 3} or SBN single crystals. Among the various PLZT compositions 8/65/35, near the morphotropic boundary, exhibit large electrooptic effect and thus have found applications in light shutters and displays. In the present study we have investigated radial mode piezoelectric transformer based on optically transparent PLZT8/65/35 ceramics. The effect of the UV light generated photovoltage and photostriction on the efficiency and voltage step-up ratio of piezoelectric transformer have been demonstrated. Novel functions of this device is proposed by superimposing two sophistically coupled effects of piezoelectricity and photostriction.

Theory of Nonlocal Point Transformations in General Relativity

Directory of Open Access Journals (Sweden)

Massimo Tessarotto

2016-01-01

Full Text Available A discussion of the functional setting customarily adopted in General Relativity (GR is proposed. This is based on the introduction of the notion of nonlocal point transformations (NLPTs. While allowing the extension of the traditional concept of GR-reference frame, NLPTs are important because they permit the explicit determination of the map between intrinsically different and generally curved space-times expressed in arbitrary coordinate systems. For this purpose in the paper the mathematical foundations of NLPT-theory are laid down and basic physical implications are considered. In particular, explicit applications of the theory are proposed, which concern (1 a solution to the so-called Einstein teleparallel problem in the framework of NLPT-theory; (2 the determination of the tensor transformation laws holding for the acceleration 4-tensor with respect to the group of NLPTs and the identification of NLPT-acceleration effects, namely, the relationship established via general NLPT between particle 4-acceleration tensors existing in different curved space-times; (3 the construction of the nonlocal transformation law connecting different diagonal metric tensors solution to the Einstein field equations; and (4 the diagonalization of nondiagonal metric tensors.

GEOPORTALE NAZIONALE Un approfondimento sulle metodologie di conversione e trasformazione coordinate

Directory of Open Access Journals (Sweden)

Salvatore Costabile

2013-04-01

Full Text Available Con il presente articolo si intende ampliare la conoscenza e la fruibilità del servizio di conversione di coordinate delGeoportale Nazionale già descritto nel precedente numero di GEOmedia, dando una dettagliata descrizione deglialgoritmi impiegati e delle metodologie di trasformazione ricomprese all’interno del servizio stesso.With the present article is intended to broaden the knowledgeand availability of the service to coordinate conversionof the National Geoportal already described in the previousissue of GEOmedia, giving a detailed description of thealgorithms used and methods of transformation includedwithin the service.

The unified coordination language UnCL.

NARCIS (Netherlands)

F.S. de Boer (Frank); J.V. Guillen Scholten (Juan); J.F. Jacob (Joost)

2005-01-01

textabstractIn this paper we show how to use a (subset) of UML as an Unified Coordination Language (UnCL) that is based on a separation of concerns between coordination and computation. As such UnCL provides a general language for the coordination of, in particular, object-oriented applications. The

Identification of the iron oxidation state and coordination geometry in iron oxide- and zeolite-based catalysts using pre-edge XAS analysis.

Science.gov (United States)

Boubnov, Alexey; Lichtenberg, Henning; Mangold, Stefan; Grunwaldt, Jan Dierk

2015-03-01

transformed into Fe(2+), while the local Fe-O coordination number of 4-5 is maintained, suggesting that the reduction involves a rearrangement of the oxygen neighbours rather than their removal. In conclusion, the variogram-based analysis of Fe K-edge spectra proves to be very useful in catalysis research.

Fourier transform resampling: Theory and application

International Nuclear Information System (INIS)

Hawkins, W.G.

1996-01-01

One of the most challenging problems in medical imaging is the development of reconstruction algorithms for nonstandard geometries. This work focuses on the application of Fourier analysis to the problem of resampling or rebinning. Conventional resampling methods utilizing some form of interpolation almost always result in a loss of resolution in the tomographic image. Fourier Transform Resampling (FTRS) offers potential improvement because the Modulation Transfer Function (MTF) of the process behaves like an ideal low pass filter. The MTF, however, is nonstationary if the coordinate transformation is nonlinear. FTRS may be viewed as a generalization of the linear coordinate transformations of standard Fourier analysis. Simulated MTF's were obtained by projecting point sources at different transverse positions in the flat fan beam detector geometry. These MTF's were compared to the closed form expression for FIRS. Excellent agreement was obtained for frequencies at or below the estimated cutoff frequency. The resulting FTRS algorithm is applied to simulations with symmetric fan beam geometry, an elliptical orbit and uniform attenuation, with a normalized root mean square error (NRME) of 0.036. Also, a Tc-99m point source study (1 cm dia., placed in air 10 cm from the COR) for a circular fan beam acquisition was reconstructed with a hybrid resampling method. The FWHM of the hybrid resampling method was 11.28 mm and compares favorably with a direct reconstruction (FWHM: 11.03 mm)

Representation of Coordination Mechanisms in IMS Learning Design to Support Group-based Learning

NARCIS (Netherlands)

Miao, Yongwu; Burgos, Daniel; Griffiths, David; Koper, Rob

2007-01-01

Miao, Y., Burgos, D., Griffiths, D., & Koper, R. (2008). Representation of Coordination Mechanisms in IMS Learning Design to Support Group-based Learning. In L. Lockyer, S. Bennet, S. Agostinho & B. Harper (Eds.), Handbook of Research on Learning Design and Learning Objects: Issues, Applications and

Properties and Structure of In Situ Transformed PAN-Based Carbon Fibers

Directory of Open Access Journals (Sweden)

Jingjing Cao

2018-06-01

Full Text Available Carbon fibers in situ prepared during the hot-pressed sintering in a vacuum is termed in situ transformed polyacrylonitrile-based (PAN-based carbon fibers, and the fibrous precursors are the pre-oxidized PAN fibers. The properties and structure of in situ transformed PAN-based carbon fibers are investigated by Nano indenter, SEM, TEM, XRD, and Raman. The results showed that the microstructure of the fiber surface layer was compact, while the core was loose, with evenly-appearing microvoids. The elastic modulus and nanohardness of the fiber surface layer (303.87 GPa and 14.82 GPa were much higher than that of the core (16.57 GPa and 1.54 GPa, and its interlayer spacing d002 and crystallinity were about 0.347 nm and 0.97 respectively. It was found that the preferred orientation of the surface carbon layers with ordered carbon atomic arrangement tended to be parallel to the fiber axis, whereas the fiber core in the amorphous region exhibited a random texture and the carbon atomic arrangement was in a disordered state. It indicates that the in situ transformed PAN-based carbon fibers possess significantly turbostratic structure and anisotropy.

ICT Based HIL Validation of Voltage Control Coordination in Smart Grids Scenarios

DEFF Research Database (Denmark)

Shahid, Kamal; Petersen, Lennart; Olsen, Rasmus Løvenstein

2018-01-01

. However, here, the results are validated through a real-time Hardware-In-The-Loop framework using an exemplary benchmark grid area in Denmark as a base case that includes flexible renewable power plants providing voltage control functionality. The provision of voltage control support from ReGen plants...... is verified on a large-scale power system against the baseline scenario, considering the hierarchical industrial controller platforms used nowadays in power plants. Moreover, the verification of online voltage control support is carried out by taking into account a communication network as well......This paper aims to validate the capability of renewable generation (ReGen) plants to provide online voltage control coordination ancillary service to the system operators. Simulation studies on online coordination concepts from ReGen plants have already been identified in previous publications...

Multi-stage phase retrieval algorithm based upon the gyrator transform.

Science.gov (United States)

Rodrigo, José A; Duadi, Hamootal; Alieva, Tatiana; Zalevsky, Zeev

2010-01-18

The gyrator transform is a useful tool for optical information processing applications. In this work we propose a multi-stage phase retrieval approach based on this operation as well as on the well-known Gerchberg-Saxton algorithm. It results in an iterative algorithm able to retrieve the phase information using several measurements of the gyrator transform power spectrum. The viability and performance of the proposed algorithm is demonstrated by means of several numerical simulations and experimental results.

Multi-stage phase retrieval algorithm based upon the gyrator transform

OpenAIRE

Rodrigo Martín-Romo, José Augusto; Duadi, Hamootal; Alieva, Tatiana Krasheninnikova; Zalevsky, Zeev

2010-01-01

The gyrator transform is a useful tool for optical information processing applications. In this work we propose a multi-stage phase retrieval approach based on this operation as well as on the well-known Gerchberg-Saxton algorithm. It results in an iterative algorithm able to retrieve the phase information using several measurements of the gyrator transform power spectrum. The viability and performance of the proposed algorithm is demonstrated by means of several numerical simulations and exp...

Quantum optical effective-medium theory and transformation quantum optics for metamaterials

DEFF Research Database (Denmark)

Wubs, Martijn; Amooghorban, Ehsan; Zhang, Jingjing

2016-01-01

electrodynamics of media with both loss and gain. In the second part of this paper, we present a new application of transformation optics whereby local spontaneous-emission rates of quantum emitters can be designed. This follows from an analysis how electromagnetic Green functions transform under coordinate......While typically designed to manipulate classical light, metamaterials have many potential applications for quantum optics as well. We argue why a quantum optical effective-medium theory is needed. We present such a theory for layered metamaterials that is valid for light propagation in all spatial...... directions, thereby generalizing earlier work for one-dimensional propagation. In contrast to classical effective-medium theory there is an additional effective parameter that describes quantum noise. Our results for metamaterials are based on a rather general Lagrangian theory for the quantum...

Coaching Model + Clinical Playbook = Transformative Learning.

Science.gov (United States)

Fletcher, Katherine A; Meyer, Mary

2016-01-01

Health care employers demand that workers be skilled in clinical reasoning, able to work within complex interprofessional teams to provide safe, quality patient-centered care in a complex evolving system. To this end, there have been calls for radical transformation of nursing education including the development of a baccalaureate generalist nurse. Based on recommendations from the American Association of Colleges of Nursing, faculty concluded that clinical education must change moving beyond direct patient care by applying the concepts associated with designer, manager, and coordinator of care and being a member of a profession. To accomplish this, the faculty utilized a system of focused learning assignments (FLAs) that present transformative learning opportunities that expose students to "disorienting dilemmas," alternative perspectives, and repeated opportunities to reflect and challenge their own beliefs. The FLAs collected in a "Playbook" were scaffolded to build the student's competencies over the course of the clinical experience. The FLAs were centered on the 6 Quality and Safety Education for Nurses competencies, with 2 additional concepts of professionalism and systems-based practice. The FLAs were competency-based exercises that students performed when not assigned to direct patient care or had free clinical time. Each FLA had a lesson plan that allowed the student and faculty member to see the competency addressed by the lesson, resources, time on task, student instructions, guide for reflection, grading rubric, and recommendations for clinical instructor. The major advantages of the model included (a) consistent implementation of structured learning experiences by a diverse teaching staff using a coaching model of instruction; (b) more systematic approach to present learning activities that build upon each other; (c) increased time for faculty to interact with students providing direct patient care; (d) guaranteed capture of selected transformative

An integral transform related to quantization

International Nuclear Information System (INIS)

Daubechies, I.; Grossmann, A.

1978-08-01

The authors study in a coordinate-free way the integral transform relating a function on phase space to the matrix elements of the corresponding quantum mechanical operator between coherent states. The items discussed include: inversion (given by the same kernel), bounds, matrix elements between eigenstates of harmonic oscillators, and classical functions corresponding to permutation operators. (author)

Fourier transform inequalities for phylogenetic trees.

Science.gov (United States)

Matsen, Frederick A

2009-01-01

Phylogenetic invariants are not the only constraints on site-pattern frequency vectors for phylogenetic trees. A mutation matrix, by its definition, is the exponential of a matrix with non-negative off-diagonal entries; this positivity requirement implies non-trivial constraints on the site-pattern frequency vectors. We call these additional constraints "edge-parameter inequalities". In this paper, we first motivate the edge-parameter inequalities by considering a pathological site-pattern frequency vector corresponding to a quartet tree with a negative internal edge. This site-pattern frequency vector nevertheless satisfies all of the constraints described up to now in the literature. We next describe two complete sets of edge-parameter inequalities for the group-based models; these constraints are square-free monomial inequalities in the Fourier transformed coordinates. These inequalities, along with the phylogenetic invariants, form a complete description of the set of site-pattern frequency vectors corresponding to bona fide trees. Said in mathematical language, this paper explicitly presents two finite lists of inequalities in Fourier coordinates of the form "monomial < or = 1", each list characterizing the phylogenetically relevant semialgebraic subsets of the phylogenetic varieties.

Calculation Scheme Based on a Weighted Primitive: Application to Image Processing Transforms

Directory of Open Access Journals (Sweden)

Gregorio de Miguel Casado

2007-01-01

Full Text Available This paper presents a method to improve the calculation of functions which specially demand a great amount of computing resources. The method is based on the choice of a weighted primitive which enables the calculation of function values under the scope of a recursive operation. When tackling the design level, the method shows suitable for developing a processor which achieves a satisfying trade-off between time delay, area costs, and stability. The method is particularly suitable for the mathematical transforms used in signal processing applications. A generic calculation scheme is developed for the discrete fast Fourier transform (DFT and then applied to other integral transforms such as the discrete Hartley transform (DHT, the discrete cosine transform (DCT, and the discrete sine transform (DST. Some comparisons with other well-known proposals are also provided.

Matrix-Vector Based Fast Fourier Transformations on SDR Architectures

Directory of Open Access Journals (Sweden)

Y. He

2008-05-01

Full Text Available Today Discrete Fourier Transforms (DFTs are applied in various radio standards based on OFDM (Orthogonal Frequency Division Multiplex. It is important to gain a fast computational speed for the DFT, which is usually achieved by using specialized Fast Fourier Transform (FFT engines. However, in face of the Software Defined Radio (SDR development, more general (parallel processor architectures are often desirable, which are not tailored to FFT computations. Therefore, alternative approaches are required to reduce the complexity of the DFT. Starting from a matrix-vector based description of the FFT idea, we will present different factorizations of the DFT matrix, which allow a reduction of the complexity that lies between the original DFT and the minimum FFT complexity. The computational complexities of these factorizations and their suitability for implementation on different processor architectures are investigated.

Considerazioni sui nuovi servizi di conversione di coordinate del Geoportale Nazionale

Directory of Open Access Journals (Sweden)

Roberto Rossi

2013-04-01

questo passaggio, i servizi di conversione del Geoportale Nazionale siano un preziosissimo strumento a disposizione di tutti... Publication of conversion systems of coordinates on the National Geoportal has attracted positive comments in general, but also some criticism by users.The author hopes that transformation grids owned by Italian Military Geographic Institute will be soon available as Open Data. Anyway he believes that, meanwhile, conversion and transformation services offered by National Geoportal are precious tools accessible to everyone.

Acoustic cloaking and transformation acoustics

International Nuclear Information System (INIS)

Chen Huanyang; Chan, C T

2010-01-01

In this review, we give a brief introduction to the application of the new technique of transformation acoustics, which draws on a correspondence between coordinate transformation and material properties. The technique is formulated for both acoustic waves and linear liquid surface waves. Some interesting conceptual devices can be designed for manipulating acoustic waves. For example, we can design acoustic cloaks that make an object invisible to acoustic waves, and the cloak can either encompass or lie outside the object to be concealed. Transformation acoustics, as an analog of transformation optics, can go beyond invisibility cloaking. As an illustration for manipulating linear liquid surface waves, we show that a liquid wave rotator can be designed and fabricated to rotate the wave front. The acoustic transformation media require acoustic materials which are anisotropic and inhomogeneous. Such materials are difficult to find in nature. However, composite materials with embedded sub-wavelength resonators can in principle be made and such 'acoustic metamaterials' can exhibit nearly arbitrary values of effective density and modulus tensors to satisfy the demanding material requirements in transformation acoustics. We introduce resonant sonic materials and Helmholtz resonators as examples of acoustic metamaterials that exhibit resonant behaviour in effective density and effective modulus. (topical review)

Post-synthetic transformation of a Zn( ii ) polyhedral coordination network into a new supramolecular isomer of HKUST-1

Energy Technology Data Exchange (ETDEWEB)

Chen, Yao [State Key Laboratory of Medicinal Chemical Biology; Nankai University; Tianjin 300071; P. R. China; College of Pharmacy; Wojtas, Lukasz [Department of Chemistry; University of South Florida; 4202 East Fowler Avenue; Tampa; USA; Ma, Shengqian [Department of Chemistry; University of South Florida; 4202 East Fowler Avenue; Tampa; USA; Zaworotko, Michael J. [Department of Chemistry & Environmental Sciences, Bernal Institute, University of Limerick; Limerick; Republic of Ireland; Zhang, Zhenjie [College of Chemistry, Nankai University; Tianjin; P. R. China; State Key Laboratory of Medicinal Chemical Biology; Nankai University

2017-01-01

A Zn-based porphyrin containing metal–organic material (porphMOM-1) was post-synthetically transformed into a Cu-based porphyrin-encapsulating metal–organic material (porph@HKUST-1-β).HKUST-1-βis a new supramolecular isomer ofHKUST-1.

Coordination functionalization of graphene oxide with tetraazamacrocyclic complexes of nickel(II): Generation of paramagnetic centers

Energy Technology Data Exchange (ETDEWEB)

Basiuk, Vladimir A., E-mail: basiuk@nucleares.unam.mx [Instituto de Ciencias Nucleares, Universidad Nacional Autónoma de México, Circuito Exterior C.U., 04510 México D.F. (Mexico); Department of Chemistry,Tufts University, 62 Talbot Avenue, Medford, MA 02155 (United States); Alzate-Carvajal, Natalia [Centro de Ciencias Aplicadas y Desarrollo Tecnológico, Universidad Nacional Autónoma de México, Circuito Exterior C.U., 04510 México D.F. (Mexico); Henao-Holguín, Laura V. [Instituto de Ciencias Nucleares, Universidad Nacional Autónoma de México, Circuito Exterior C.U., 04510 México D.F. (Mexico); Rybak-Akimova, Elena V. [Department of Chemistry,Tufts University, 62 Talbot Avenue, Medford, MA 02155 (United States); Basiuk, Elena V., E-mail: elbg1111@gmail.com [Department of Chemistry,Tufts University, 62 Talbot Avenue, Medford, MA 02155 (United States); Centro de Ciencias Aplicadas y Desarrollo Tecnológico, Universidad Nacional Autónoma de México, Circuito Exterior C.U., 04510 México D.F. (Mexico)

2016-05-15

Highlights: • [Ni(cyclam)]{sup 2+} and [Ni(tet b)]{sup 2+} cations coordinate to carboxylic groups of GO. • The coordination takes place under basic conditions in aqueous-based medium. • The coordination results in the conversion from low-spin to high-spin Ni(II). • Functionalized GO samples were characterized by various instrumental techniques. - Abstract: We describe a novel approach to functionalization of graphene oxide (GO) which allows for a facile generation of paramagnetic centers from two diamagnetic components. Coordination attachment of [Ni(cyclam)]{sup 2+} or [Ni(tet b)]{sup 2+} tetraazamacrocyclic cations to carboxylic groups of GO takes place under basic conditions in aqueous-based reaction medium. The procedure is very straightforward and does not require high temperatures or other harsh conditions. Changing the coordination geometry of Ni(II) from square-planar tetracoordinated to pseudooctahedral hexacoordinated brings about the conversion from low-spin to high-spin state of the metal centers. Even though the content of tetraazamacrocyclic complexes in functionalized GO samples was found to be relatively low (nickel content of ca. 1 wt%, as determined by thermogravimetric analysis, elemental analysis and energy dispersive X-ray spectroscopy), room temperature magnetic susceptibility measurements easily detected the appearance of paramagnetic properties in GO + [Ni(cyclam)] and GO + [Ni(tet b)] nanohybrids, with effective magnetic moments of 1.95 BM and 2.2 BM for, respectively. According to density functional theory calculations, the main spin density is localized at the macrocyclic complexes, without considerable extension to graphene sheet, which suggests insignificant ferromagnetic coupling in the nanohybrids, in agreement with the results of magnetic susceptibility measurements. The coordination attachment of Ni(II) tetraazamacrocycles to GO results in considerable changes in Fourier-transform infrared and X-ray photoelectron spectra

Correspondence between quantum-optical transform and classical-optical transform explored by developing Dirac's symbolic method

Science.gov (United States)

Fan, Hong-yi; Hu, Li-yun

2012-06-01

By virtue of the new technique of performing integration over Dirac's ket-bra operators, we explore quantum optical version of classical optical transformations such as optical Fresnel transform, Hankel transform, fractional Fourier transform, Wigner transform, wavelet transform and Fresnel-Hadmard combinatorial transform etc. In this way one may gain benefit for developing classical optics theory from the research in quantum optics, or vice-versa. We cannot only find some new quantum mechanical unitary operators which correspond to the known optical transformations, deriving a new theorem for calculating quantum tomogram of density operators, but also can reveal some new classical optical transformations. For examples, we find the generalized Fresnel operator (GFO) to correspond to the generalized Fresnel transform (GFT) in classical optics. We derive GFO's normal product form and its canonical coherent state representation and find that GFO is the loyal representation of symplectic group multiplication rule. We show that GFT is just the transformation matrix element of GFO in the coordinate representation such that two successive GFTs is still a GFT. The ABCD rule of the Gaussian beam propagation is directly demonstrated in the context of quantum optics. Especially, the introduction of quantum mechanical entangled state representations opens up a new area in finding new classical optical transformations. The complex wavelet transform and the condition of mother wavelet are studied in the context of quantum optics too. Throughout our discussions, the coherent state, the entangled state representation of the two-mode squeezing operators and the technique of integration within an ordered product (IWOP) of operators are fully used. All these have confirmed Dirac's assertion: "...for a quantum dynamic system that has a classical analogue, unitary transformation in the quantum theory is the analogue of contact transformation in the classical theory".

Considerazioni sui nuovi servizi di conversione di coordinate del Geoportale Nazionale

Directory of Open Access Journals (Sweden)

Roberto Rossi

2013-04-01

Full Text Available La pubblicazione dei sistemi di conversione di coordinate sul Geoportale Nazionale ha suscitato commenti in generale positivi, ma anche qualche critica da parte degli utenti. Chiscrive auspica che i grigliati IGM, in un prossimo futuro, entrino a far parte del patrimonio dei dati pubblici e aperti del nostro paese. Ritiene però che, in attesa che i tempi siano maturi perquesto passaggio, i servizi di conversione del Geoportale Nazionale siano un preziosissimo strumento a disposizione di tutti...Publication of conversion systems of coordinates on the National Geoportal has attracted positive comments in general, but also some criticism by users.The author hopes that transformation grids owned by Italian Military Geographic Institute will be soon available as Open Data. Anyway he believes that, meanwhile, conversion and transformation services offered by National Geoportal are precious tools accessible to everyone. 

Saturation Detection-Based Blocking Scheme for Transformer Differential Protection

Directory of Open Access Journals (Sweden)

Byung Eun Lee

2014-07-01

Full Text Available This paper describes a current differential relay for transformer protection that operates in conjunction with a core saturation detection-based blocking algorithm. The differential current for the magnetic inrush or over-excitation has a point of inflection at the start and end of each saturation period of the transformer core. At these instants, discontinuities arise in the first-difference function of the differential current. The second- and third-difference functions convert the points of inflection into pulses, the magnitudes of which are large enough to detect core saturation. The blocking signal is activated if the third-difference of the differential current is larger than the threshold and is maintained for one cycle. In addition, a method to discriminate between transformer saturation and current transformer (CT saturation is included. The performance of the proposed blocking scheme was compared with that of a conventional harmonic blocking method. The test results indicate that the proposed scheme successfully discriminates internal faults even with CT saturation from the magnetic inrush, over-excitation, and external faults with CT saturation, and can significantly reduce the operating time delay of the relay.

Discrete Multiwavelet Critical-Sampling Transform-Based OFDM System over Rayleigh Fading Channels

Directory of Open Access Journals (Sweden)

Sameer A. Dawood

2015-01-01

Full Text Available Discrete multiwavelet critical-sampling transform (DMWCST has been proposed instead of fast Fourier transform (FFT in the realization of the orthogonal frequency division multiplexing (OFDM system. The proposed structure further reduces the level of interference and improves the bandwidth efficiency through the elimination of the cyclic prefix due to the good orthogonality and time-frequency localization properties of the multiwavelet transform. The proposed system was simulated using MATLAB to allow various parameters of the system to be varied and tested. The performance of DMWCST-based OFDM (DMWCST-OFDM was compared with that of the discrete wavelet transform-based OFDM (DWT-OFDM and the traditional FFT-based OFDM (FFT-OFDM over flat fading and frequency-selective fading channels. Results obtained indicate that the performance of the proposed DMWCST-OFDM system achieves significant improvement compared to those of DWT-OFDM and FFT-OFDM systems. DMWCST improves the performance of the OFDM system by a factor of 1.5–2.5 dB and 13–15.5 dB compared with the DWT and FFT, respectively. Therefore the proposed system offers higher data rate in wireless mobile communications.

Combination of optically measured coordinates and displacements for quantitative investigation of complex objects

Science.gov (United States)

Andrae, Peter; Beeck, Manfred-Andreas; Jueptner, Werner P. O.; Nadeborn, Werner; Osten, Wolfgang

1996-09-01

Holographic interferometry makes it possible to measure high precision displacement data in the range of the wavelength of the used laser light. However, the determination of 3D- displacement vectors of objects with complex surfaces requires the measurement of 3D-object coordinates not only to consider local sensitivities but to distinguish between in-plane deformation, i.e. strains, and out-of-plane components, i.e. shears, too. To this purpose both the surface displacement and coordinates have to be combined and it is advantageous to make the data available for CAE- systems. The object surface has to be approximated analytically from the measured point cloud to generate a surface mesh. The displacement vectors can be assigned to the nodes of this surface mesh for visualization of the deformation of the object under test. They also can be compared to the results of FEM-calculations or can be used as boundary conditions for further numerical investigations. Here the 3D-object coordinates are measured in a separate topometric set-up using a modified fringe projection technique to acquire absolute phase values and a sophisticated geometrical model to map these phase data onto coordinates precisely. The determination of 3D-displacement vectors requires the measurement of several interference phase distributions for at least three independent sensitivity directions depending on the observation and illumination directions as well as the 3D-position of each measuring point. These geometric quantities have to be transformed into a reference coordinate system of the interferometric set-up in order to calculate the geometric matrix. The necessary transformation can be realized by means of a detection of object features in both data sets and a subsequent determination of the external camera orientation. This paper presents a consistent solution for the measurement and combination of shape and displacement data including their transformation into simulation systems. The

78 FR 49480 - Proposed Information Collection; Comment Request; NTIA/FCC Web-based Frequency Coordination System

Science.gov (United States)

2013-08-14

... Information Collection; Comment Request; NTIA/FCC Web- based Frequency Coordination System AGENCY: National... the data by means of an internet web-based system. The applications on the Web site provide real-time... INFORMATION: I. Abstract The National Telecommunications and Information Administration (NTIA) hosts a web...

Evaluating Pillar Industry's Transformation Capability: A Case Study of Two Chinese Steel-Based Cities.

Science.gov (United States)

Li, Zhidong; Marinova, Dora; Guo, Xiumei; Gao, Yuan

2015-01-01

Many steel-based cities in China were established between the 1950s and 1960s. After more than half a century of development and boom, these cities are starting to decline and industrial transformation is urgently needed. This paper focuses on evaluating the transformation capability of resource-based cities building an evaluation model. Using Text Mining and the Document Explorer technique as a way of extracting text features, the 200 most frequently used words are derived from 100 publications related to steel- and other resource-based cities. The Expert Evaluation Method (EEM) and Analytic Hierarchy Process (AHP) techniques are then applied to select 53 indicators, determine their weights and establish an index system for evaluating the transformation capability of the pillar industry of China's steel-based cities. Using real data and expert reviews, the improved Fuzzy Relation Matrix (FRM) method is applied to two case studies in China, namely Panzhihua and Daye, and the evaluation model is developed using Fuzzy Comprehensive Evaluation (FCE). The cities' abilities to carry out industrial transformation are evaluated with concerns expressed for the case of Daye. The findings have policy implications for the potential and required industrial transformation in the two selected cities and other resource-based towns.

Tunable arbitrary unitary transformer based on multiple sections of multicore fibers with phase control.

Science.gov (United States)

Zhou, Junhe; Wu, Jianjie; Hu, Qinsong

2018-02-05

In this paper, we propose a novel tunable unitary transformer, which can achieve arbitrary discrete unitary transforms. The unitary transformer is composed of multiple sections of multi-core fibers with closely aligned coupled cores. Phase shifters are inserted before and after the sections to control the phases of the waves in the cores. A simple algorithm is proposed to find the optimal phase setup for the phase shifters to realize the desired unitary transforms. The proposed device is fiber based and is particularly suitable for the mode division multiplexing systems. A tunable mode MUX/DEMUX for a three-mode fiber is designed based on the proposed structure.

Total energy calculations for structural phase transformations

International Nuclear Information System (INIS)

Ye, Y.Y.; Chan, C.T.; Ho, K.M.; Harmon, B.N.

1990-01-01

The structural integrity and physical properties of crystalline solids are frequently limited or enhanced by the occurrence of phase transformations. Martensitic transformations involve the collective displacement of atoms from one ordered state to another. Modern methods to determine the microscopic electronic changes as the atoms move are now accurate enough to evaluate the very small energy differences involved. Extensive first principles calculations for the prototypical martensitic transformation from body-centered cubic (bcc) to closepacked 9R structure in sodium metal are described. The minimum energy coordinate or configuration path between the bcc and 9R structures is determined as well as paths to other competing close-packed structures. The energy barriers and important anharmonic interactions are identified and general conclusions drawn. The calculational methods used to solve the Schrodinger equation include pseudopotentials, fast Fourier transforms, efficient matrix diagnonalization, and supercells with many atoms

Fast heap transform-based QR-decomposition of real and complex matrices: algorithms and codes

Science.gov (United States)

Grigoryan, Artyom M.

2015-03-01

In this paper, we describe a new look on the application of Givens rotations to the QR-decomposition problem, which is similar to the method of Householder transformations. We apply the concept of the discrete heap transform, or signal-induced unitary transforms which had been introduced by Grigoryan (2006) and used in signal and image processing. Both cases of real and complex nonsingular matrices are considered and examples of performing QR-decomposition of square matrices are given. The proposed method of QR-decomposition for the complex matrix is novel and differs from the known method of complex Givens rotation and is based on analytical equations for the heap transforms. Many examples illustrated the proposed heap transform method of QR-decomposition are given, algorithms are described in detail, and MATLAB-based codes are included.

Yang-Mills gauge invariance of a space of Bose and Fermi coordinates

International Nuclear Information System (INIS)

Friedman, M.H.; Srivastava, Y.

1977-01-01

A complete formalism is developed for imposing Yang-Mills gauge invariance induced by general coordinate transformations on superspace (i.e., a space containing both commuting and anticommuting coordinates). The appropriate group is the graded pseudo-Lie group of real, general linear transformations on superspace analogous to the role played by GL(4,R) in general relativity. The construction of derivatives which transform covariantly under this group forces the introduction of a connection. In the usual gauge theories the connection is just the vector potential, whereas here we expect it to be a function of all the dynamical fields. In this purely affine theory, field strengths and our proposed equations of motion for them result in a self-sourced theory involving only the connection. However, we find that there exist solutions which permit us to define a metric for which an inverse does not exist. These solutions are associated with a spontaneous symmetry breakdown of the vacuum which yields only the Lorentz metric and with no restriction on the internal-symmetry group. This spontaneous symmetry breaking introduces a parameter with the dimensions of (mass) 2

Resilient Coordination of Networked Multiagent Systems Based on Distributed State Emulators

OpenAIRE

Yucelen, Tansel; De La Torre, Gerardo

2014-01-01

This note studies resilient coordination of networked multiagent systems in the presence of misbehaving agents, i.e., agents that are subject to adversaries modeled as exogenous disturbances. Apart from the existing relevant literature that make specific assumptions on the graph topology and/or the fraction of misbehaving agents, we present an adaptive control architecture based on distributed state emulators and show that the nominal networked multiagent system behavior can be retrieved even...

Quantum image encryption based on generalized affine transform and logistic map

Science.gov (United States)

Liang, Hao-Ran; Tao, Xiang-Yang; Zhou, Nan-Run

2016-07-01

Quantum circuits of the generalized affine transform are devised based on the novel enhanced quantum representation of digital images. A novel quantum image encryption algorithm combining the generalized affine transform with logistic map is suggested. The gray-level information of the quantum image is encrypted by the XOR operation with a key generator controlled by the logistic map, while the position information of the quantum image is encoded by the generalized affine transform. The encryption keys include the independent control parameters used in the generalized affine transform and the logistic map. Thus, the key space is large enough to frustrate the possible brute-force attack. Numerical simulations and analyses indicate that the proposed algorithm is realizable, robust and has a better performance than its classical counterpart in terms of computational complexity.

Detecting Structural Metadata with Decision Trees and Transformation-Based Learning

National Research Council Canada - National Science Library

Kim, Joungbum; Schwarm, Sarah E; Ostendorf, Mari

2004-01-01

.... Specifically, combinations of decision trees and language models are used to predict sentence ends and interruption points and given these events transformation based learning is used to detect edit...

Deficiencies of the cryptography based on multiple-parameter fractional Fourier transform.

Science.gov (United States)

Ran, Qiwen; Zhang, Haiying; Zhang, Jin; Tan, Liying; Ma, Jing

2009-06-01

Methods of image encryption based on fractional Fourier transform have an incipient flaw in security. We show that the schemes have the deficiency that one group of encryption keys has many groups of keys to decrypt the encrypted image correctly for several reasons. In some schemes, many factors result in the deficiencies, such as the encryption scheme based on multiple-parameter fractional Fourier transform [Opt. Lett.33, 581 (2008)]. A modified method is proposed to avoid all the deficiencies. Security and reliability are greatly improved without increasing the complexity of the encryption process. (c) 2009 Optical Society of America.

A practical approach for active camera coordination based on a fusion-driven multi-agent system

Science.gov (United States)

Bustamante, Alvaro Luis; Molina, José M.; Patricio, Miguel A.

2014-04-01

In this paper, we propose a multi-agent system architecture to manage spatially distributed active (or pan-tilt-zoom) cameras. Traditional video surveillance algorithms are of no use for active cameras, and we have to look at different approaches. Such multi-sensor surveillance systems have to be designed to solve two related problems: data fusion and coordinated sensor-task management. Generally, architectures proposed for the coordinated operation of multiple cameras are based on the centralisation of management decisions at the fusion centre. However, the existence of intelligent sensors capable of decision making brings with it the possibility of conceiving alternative decentralised architectures. This problem is approached by means of a MAS, integrating data fusion as an integral part of the architecture for distributed coordination purposes. This paper presents the MAS architecture and system agents.

Exploring Phonetic Realization in Danish by Transformation-Based Learning

DEFF Research Database (Denmark)

Uneson, Marcus; Schachtenhaufen, Ruben

2011-01-01

We align phonemic and semi-narrow phonetic transcriptions in the DanPASS corpus and extend the phonemic description with sound classes and with traditional phonetic features. From this representation, we induce rules for phonetic realization by Transformation-Based Learning (TBL). The rules thus ...

Room-Temperature Deformation and Martensitic Transformation of Two Co-Cr-Based Alloys

Science.gov (United States)

Cai, S.; Schaffer, J. E.; Huang, D.; Gao, J.; Ren, Y.

2018-05-01

Deformation of two Co-Cr alloys was studied by in situ synchrotron X-ray diffraction. Both alloys show stress-induced martensite transformation, which is affected by phase stabilities and transformation strains. Crystal structure of WC in Co-20Cr-15W-10Ni is identified. Compared with other phases present, it is elastically isotropic, exhibits high strength, and can elastically withstand strains exceeding 1 pct. Texture change during phase transformation is explained based on the crystal orientation relationship between γ- and ɛ-phases.

Homo- and heterodinuclear coordination polymers based on a tritopic cyclam bis-terpyridine unit: Structure and rheological properties

Energy Technology Data Exchange (ETDEWEB)

Qu, Li; Fan, Jiangxia; Ren, Yong; Xiong, Kun [State Key Laboratory Cultivation Base for Nonmetal Composites and Functional Materials, School of Materials Science and Engineering, Southwest University of Science and Technology, Mianyang 621010 (China); Yan, Minhao, E-mail: yanminhao@swust.edu.cn [State Key Laboratory Cultivation Base for Nonmetal Composites and Functional Materials, School of Materials Science and Engineering, Southwest University of Science and Technology, Mianyang 621010 (China); Tuo, Xianguo, E-mail: tuoxg@swust.edu.cn [Laboratory of National Defense for Radioactive Waste and Environmental Security, Southwest University of Science and Technology, Mianyang 621010 (China); Terech, Pierre [SPrAM, UMR CEA/CNRS/UJF-Grenoble 1, INAC, Grenoble F-38054 (France); Royal, Guy [Université Joseph Fourier Grenoble I, Département de Chimie Moléculaire, UMR CNRS-5250, Institut de Chimie Moléculaire de Grenoble, FR CNRS-2607, BP 53, 38041 Grenoble Cedex 9 (France)

2015-03-01

An innovative coordination polymer based on a tritopic ligand having the bis-terpyridine cyclam (CHTT) unit is explored. Homo- or heteronuclear 1D coordination polymers can be formed with bivalent metal ions such as Co(II) and Ni(II) in solvent DMF. Creep-recovery curves of the (Co{sup II}){sub 2}CHTT gels formed from 1D coordination polymers were analyzed with the Burgers model and demonstrated an original self-healing property, unusual in the class of molecular gels. The influence of the metal type was studied through the structural features using small-angle neutron scattering (SANS) experiments. In gels, the corresponding network involves genuine fibers (R ≈ 35 Å), bundles of these fibers and also a fraction of finite size aggregates (rods with aspect ratio f ≈ 3–5). We found that the distribution of these latter structural components is sensitive to the metal ions type. Such tritopic 1D coordination polymers exhibit a range of original structural features and a facile control of the developed structures in solutions and gels by tuning their thermodynamic parameters. The versatility associated to the intrinsic dynamic ability of the systems should pave the way to original properties for molecular devices. - Graphical abstract: A tritopic ligand with a bis-terpyridine cyclam (CHTT) unit can form homo- and heterobinuclear coordination polymers with bivalent metal ions in DMF. Gels exhibit a remarkable self-healing property while structures of solutions and gels are studied by small-angle neutron scattering. - Highlights: • Homo- and heteronuclear coordination polymers based on innovative tritopic ligand. • The gels formed from the coordination polymers demonstrated self-healing property. • Influence of the metal type was studied through the structural properties by SANS. • Versatility of the singular system present original properties for molecular device.

On the integration of computer aided design and analysis using the finite element absolute nodal coordinate formulation

International Nuclear Information System (INIS)

Sanborn, Graham G.; Shabana, Ahmed A.

2009-01-01

For almost a decade, the finite element absolute nodal coordinate formulation (ANCF) has been used for both geometry and finite element representations. Because of the ANCF isoparametric property in the cases of beams, plates and shells, ANCF finite elements lend themselves easily to the geometric description of curves and surfaces, as demonstrated in the literature. The ANCF finite elements, therefore, are ideal for what is called isogeometric analysis that aims at the integration ofcomputer aided designandanalysis (ICADA), which involves the integration of what is now split into the separate fields of computer aided design (CAD) and computer aided analysis (CAA). The purpose of this investigation is to establish the relationship between the B-spline and NURBS, which are widely used in the geometric modeling, and the ANCF finite elements. It is shown in this study that by using the ANCF finite elements, one can in a straightforward manner obtain the control point representation required for the Bezier, B-spline and NURBS geometry. To this end, a coordinate transformation is used to write the ANCF gradient vectors in terms of control points. Unifying the CAD and CAA will require the use of such coordinate transformations and their inverses in order to transform control points to position vector gradients which are required for the formulation of the element transformations in the case of discontinuities as well as the formulation of the strain measures and the stress forces based on general continuum mechanics theory. In particular, fully parameterized ANCF finite elements can be very powerful in describing curve, surface, and volume geometry, and they can be effectively used to describe discontinuities while maintaining the many ANCF desirable features that include a constant mass matrix, zero Coriolis and centrifugal forces, no restriction on the amount of rotation or deformation within the finite element, ability for straightforward implementation of general

Modelling of Singapore's topographic transformation based on DEMs

Science.gov (United States)

Wang, Tao; Belle, Iris; Hassler, Uta

2015-02-01

Singapore's topography has been heavily transformed by industrialization and urbanization processes. To investigate topographic changes and evaluate soil mass flows, historical topographic maps of 1924 and 2012 were employed, and basic topographic features were vectorized. Digital elevation models (DEMs) for the two years were reconstructed based on vector features. Corresponding slope maps, a surface difference map and a scatter plot of elevation changes were generated and used to quantify and categorize the nature of the topographic transformation. The surface difference map is aggregated into five main categories of changes: (1) areas without significant height changes, (2) lowered-down areas where hill ranges were cut down, (3) raised-up areas where valleys and swamps were filled in, (4) reclaimed areas from the sea, and (5) new water-covered areas. Considering spatial proximity and configurations of different types of changes, topographic transformation can be differentiated as either creating inland flat areas or reclaiming new land from the sea. Typical topographic changes are discussed in the context of Singapore's urbanization processes. The two slope maps and elevation histograms show that generally, the topographic surface of Singapore has become flatter and lower since 1924. More than 89% of height changes have happened within a range of 20 m and 95% have been below 40 m. Because of differences in land surveying and map drawing methods, uncertainties and inaccuracies inherent in the 1924 topographic maps are discussed in detail. In this work, a modified version of a traditional scatter plot is used to present height transformation patterns intuitively. This method of deriving categorical maps of topographical changes from a surface difference map can be used in similar studies to qualitatively interpret transformation. Slope maps and histograms were also used jointly to reveal additional patterns of topographic change.

Multi-focus image fusion based on area-based standard deviation in dual tree contourlet transform domain

Science.gov (United States)

Dong, Min; Dong, Chenghui; Guo, Miao; Wang, Zhe; Mu, Xiaomin

2018-04-01

Multiresolution-based methods, such as wavelet and Contourlet are usually used to image fusion. This work presents a new image fusion frame-work by utilizing area-based standard deviation in dual tree Contourlet trans-form domain. Firstly, the pre-registered source images are decomposed with dual tree Contourlet transform; low-pass and high-pass coefficients are obtained. Then, the low-pass bands are fused with weighted average based on area standard deviation rather than the simple "averaging" rule. While the high-pass bands are merged with the "max-absolute' fusion rule. Finally, the modified low-pass and high-pass coefficients are used to reconstruct the final fused image. The major advantage of the proposed fusion method over conventional fusion is the approximately shift invariance and multidirectional selectivity of dual tree Contourlet transform. The proposed method is compared with wavelet- , Contourletbased methods and other the state-of-the art methods on common used multi focus images. Experiments demonstrate that the proposed fusion framework is feasible and effective, and it performs better in both subjective and objective evaluation.

Empiric analysis of zero voltage switching in piezoelectric transformer based resonant converters

DEFF Research Database (Denmark)

Rødgaard, Martin Schøler; Andersen, Thomas; Andersen, Michael A. E.

2012-01-01

Research and development within piezoelectric transformer (PT) based converters are rapidly increasing, as the technology is maturing and starts to prove its capabilities. High power density and high efficiencies are reported and recently several inductor-less converters have emerged [1][2][7][10......Research and development within piezoelectric transformer (PT) based converters are rapidly increasing, as the technology is maturing and starts to prove its capabilities. High power density and high efficiencies are reported and recently several inductor-less converters have emerged [1...

Homochiral coordination polymers with helixes and metal clusters based on lactate derivatives

Energy Technology Data Exchange (ETDEWEB)

Xu, Zhong-Xuan, E-mail: xuzhongxuan4201@163.com [Department of Chemistry, Zunyi Normal College, Zunyi, Guizhou 563002 (China); Ma, Yu-Lu [School of Chemical Science and Technology, Yunnan University, Kunming 650091 (China); Lv, Guo-ling [Department of Chemistry, Zunyi Normal College, Zunyi, Guizhou 563002 (China)

2017-05-15

Utilizing the lactic acid derivatives (R)-4-(1-carboxyethoxy)benzoic acid (denoted: (R)-H{sub 2}CBA) and (S)-4-(1-carboxyethoxy)benzoic acid (denoted: (S)-H{sub 2}CBA)as chiral linkers to self-assemble with 4, 4′-bipyridine (denoted: BIP) and Cd(II) ions, a couple of three-dimensional homochiral coordination polymers, namely [Cd{sub 3}((R)-CBA){sub 3} (BIP){sub 2}(H{sub 2}O)]·xGuest (1-D) and [Cd{sub 3}((S)-CBA){sub 3}(BIP){sub 2}(H{sub 2}O)]·xGuest (1-L), have been synthesized under solvothermal reaction condition. Single crystal X-ray diffraction analysis reveals the two complexes contain single helical chains based on enantiopure ligands and cadmium clusters. Moreover, some physical characteristics such as PXRD, thermal stability, solid-state circular dichroism (CD) and luminescent were also investigated. - Graphical abstract: Utilizing enantiomeric lactic acid derivatives (R)-H{sub 2}CBA and (S)-H{sub 2}CBA to assemble with Cd{sup 2+} ions and ancillary BIP ligands, a couple of 3D homochiral coordination polymers with metal clusters and helical chains have been prepared by hydrothermal reaction. - Highlights: • Chiral lactic acid derivative. • Enantiomeric coordination polymer. • Helical chain. • Trinuclear cadmium cluster.

Digital Correlation based on Wavelet Transform for Image Detection

International Nuclear Information System (INIS)

Barba, L; Vargas, L; Torres, C; Mattos, L

2011-01-01

In this work is presented a method for the optimization of digital correlators to improve the characteristic detection on images using wavelet transform as well as subband filtering. It is proposed an approach of wavelet-based image contrast enhancement in order to increase the performance of digital correlators. The multiresolution representation is employed to improve the high frequency content of images taken into account the input contrast measured for the original image. The energy of correlation peaks and discrimination level of several objects are improved with this technique. To demonstrate the potentiality in extracting characteristics using the wavelet transform, small objects inside reference images are detected successfully.

Clone Detection for Graph-Based Model Transformation Languages

DEFF Research Database (Denmark)

Strüber, Daniel; Plöger, Jennifer; Acretoaie, Vlad

2016-01-01

and analytical quality assurance. From these use cases, we derive a set of key requirements. We describe our customization of existing model clone detection techniques allowing us to address these requirements. Finally, we provide an experimental evaluation, indicating that our customization of ConQAT, one......Cloning is a convenient mechanism to enable reuse across and within software artifacts. On the downside, it is also a practice related to significant long-term maintainability impediments, thus generating a need to identify clones in affected artifacts. A large variety of clone detection techniques...... has been proposed for programming and modeling languages; yet no specific ones have emerged for model transformation languages. In this paper, we explore clone detection for graph-based model transformation languages. We introduce potential use cases for such techniques in the context of constructive...

Generalized formulation of an encryption system based on a joint transform correlator and fractional Fourier transform

International Nuclear Information System (INIS)

Vilardy, Juan M; Millán, María S; Pérez-Cabré, Elisabet; Torres, Yezid

2014-01-01

We propose a generalization of the encryption system based on double random phase encoding (DRPE) and a joint transform correlator (JTC), from the Fourier domain to the fractional Fourier domain (FrFD) by using the fractional Fourier operators, such as the fractional Fourier transform (FrFT), fractional traslation, fractional convolution and fractional correlation. Image encryption systems based on a JTC architecture in the FrFD usually produce low quality decrypted images. In this work, we present two approaches to improve the quality of the decrypted images, which are based on nonlinear processing applied to the encrypted function (that contains the joint fractional power spectrum, JFPS) and the nonzero-order JTC in the FrFD. When the two approaches are combined, the quality of the decrypted image is higher. In addition to the advantages introduced by the implementation of the DRPE using a JTC, we demonstrate that the proposed encryption system in the FrFD preserves the shift-invariance property of the JTC-based encryption system in the Fourier domain, with respect to the lateral displacement of both the key random mask in the decryption process and the retrieval of the primary image. The feasibility of this encryption system is verified and analyzed by computer simulations. (paper)

Three-dimensional tetranuclear Cd(II) coordination network based on a 1,3-alternate calix[4]arene derivative

International Nuclear Information System (INIS)

Lee, Eun Ji; Ju, Hui Yeong; Park, Ki Min; Moon, ASuk Hee; Kang, Young Jin

2015-01-01

Polynuclear coordination polymers can exhibit more intriguing network topologies and better functionalities than those of common complexes because they have metal-cluster nodes for the construction of multidimensional frameworks and the potential applications induced by collaborative activities between metal ions. New tetranuclear Cd(II) coordination polymer 1 based on 1,3-alternate calix arene derivative (H_4 CTA) with four carboxyl pendant arms has been synthesized by the solvo thermal reaction at 110 .deg. C for 2 days. Compound 1 shows a 3-D framework consisting of tetranuclear Cd(II) cluster core as a metal-cluster node and 1,3-alternate H_4CTA as a multidentate linker. The coordination polymer 1 displays intense blue emission, implying that this tetranuclear Cd(II) coordination polymer could be a suitable material in the area of luminescence research

Lateralized Effects of Categorical and Coordinate Spatial Processing of Component Parts on the Recognition of 3D Non-Nameable Objects

Science.gov (United States)

Saneyoshi, Ayako; Michimata, Chikashi

2009-01-01

Participants performed two object-matching tasks for novel, non-nameable objects consisting of geons. For each original stimulus, two transformations were applied to create comparison stimuli. In the categorical transformation, a geon connected to geon A was moved to geon B. In the coordinate transformation, a geon connected to geon A was moved to…

A Process Algebra for Supervisory Coordination

Directory of Open Access Journals (Sweden)

Jos Baeten

2011-08-01

Full Text Available A supervisory controller controls and coordinates the behavior of different components of a complex machine by observing their discrete behaviour. Supervisory control theory studies automated synthesis of controller models, known as supervisors, based on formal models of the machine components and a formalization of the requirements. Subsequently, code generation can be used to implement this supervisor in software, on a PLC, or embedded microprocessor. In this article, we take a closer look at the control loop that couples the supervisory controller and the machine. We model both event-based and state-based observations using process algebra and bisimulation-based semantics. The main application area of supervisory control that we consider is coordination, referred to as supervisory coordination, and we give an academic and an industrial example, discussing the process-theoretic concepts employed.

Digitized self-oscillating loop for piezoelectric transformer-based power converters

DEFF Research Database (Denmark)

Ekhtiari, Marzieh; Andersen, Thomas; Zhang, Zhe

2016-01-01

A new method is implemented in designing of self-oscillating loop for driving piezoelectric transformers. The implemented method is based on combining both analog and digital control systems. Digitized delay, or digitized phase shift through the self-oscillating loop results in a very precise...... frequency control and ensures an optimum operation of the piezoelectric transformer in terms of voltage gain and efficiency. In this work, additional time delay is implemented digitally for the first time through 16 bit digital-to-analog converter to the self-oscillating loop. Delay control setpoints...... updates at a rate of 417 kHz. This allows the control loop to dynamically follow frequency changes of the transformer in each resonant cycle. The operation principle behind self-oscillating is discussed in this paper. Moreover, experimental results are reported....

Application of finite Fourier transformation for the solution of the diffusion equation

International Nuclear Information System (INIS)

Kobayashi, Keisuke

1991-01-01

The application of the finite Fourier transformation to the solution of the neutron diffusion equation in one dimension, two dimensional x-y and triangular geometries is discussed. It can be shown that the equation obtained by the Nodal Green's function method in Cartesian coordinates can be derived as a special case of the finite Fourier transformation method. (author)

Transforming narratives into educational tools: the collaborative development of a transformative learning tool based on Nicaraguan adolescents' creative writing about intimate partner violence.

Science.gov (United States)

Singleton, Robyn; Picado Araúz, María de la Paz; Trocin, Kathleen; Winskell, Kate

2017-01-01

The use of narrative has become increasingly popular in the public health, community development, and education fields. Via emotionally engaging plotlines with authentic, captivating characters, stories provide an opportunity for participants to be carried away imaginatively into the characters' world while connecting the story with their own lived experiences. Stories have been highlighted as valuable tools in transformative learning. However, little published literature exists demonstrating applications of stories in group-based transformative learning curricula. This paper describes the creation of a narrative-based transformative learning tool based on an analysis of Nicaraguan adolescents' meaning-making around intimate partner violence (IPV) in their creative narratives. In collaboration with a Nicaraguan organization, US researchers analyzed a sample of narratives ( n = 55; 16 male-authored, 39 female-authored) on IPV submitted to a 2014 scriptwriting competition by adolescents aged 15-19. The data were particularly timely in that they responded to a new law protecting victims of gender-based violence, Law 779, and contradicted social-conservative claims that the Law 779 destroys family unity. We incorporated results from this analysis into the creation of the transformative learning tool, separated into thematic sections. The tool's sections (which comprise one story and three corresponding activities) aim to facilitate critical reflection, interpersonal dialogue, and self- and collective efficacy for social action around the following themes derived from the analysis: IPV and social support; IPV and romantic love; masculinity; warning signs of IPV; and sexual abuse. As a collaboration between a public health research team based at a US university and a Nicaraguan community-based organization, it demonstrates the potential in the age of increasingly smooth electronic communication for novel community-university partnerships to facilitate the development of

Operational characteristics in the three-phase transformer-type SFCL with neutral line based on sequential reclosing process

International Nuclear Information System (INIS)

Cho, Y.S.; Choi, H.S.; Jung, B.I.

2011-01-01

The three-phase transformer-type SFCL with a neutral line can control the current limiting rates according to the turn's ratio between primary and secondary windings. The transformer-type SFCL with a neutral line can reliably conduct the fault current limiting operation according to the reclosing operation duty and fault types. The superconducting elements recovered their superconducting state within the opening cycle of the circuit breaker according to the reclosing operation duty. It is expected to improve the transient stability and supply reliability of the power network. In a transformer-type superconducting fault current limiter (SFCL) with a neutral line, which is connected between the superconducting elements and secondary windings, we verified that the SFCL has excellent characteristics that induce the perfect simultaneous quench of the superconducting elements in the previous study. The application of the SFCL to the power networks requires its coordination with the reclosing operation duty, which protects a circuit. In this study, the fault current limiting and recovery characteristics of superconducting elements in the three-phase transformer-type SFCL with the neutral line were analyzed. The limiting rate of the fault current in the transformer-type SFCL could increased by an iron core, which allows quenching of the superconducting elements in a sound phase as well as in a faulted phase. In addition, the simultaneous quench led to uniform burdens on superconducting elements, all of which recovered their superconducting state within an opening cycle of a circuit breaker. Thus, the transformer-type SFCL with the neutral line could reliably conduct the fault current limiting and recovery operations of superconducting elements according to the reclosing operation duty and fault types.

Normal co-ordinate analysis of 1, 8-dibromooctane

Science.gov (United States)

Singh, Devinder; Jaggi, Neena; Singh, Nafa

2010-02-01

The organic compound 1,8-dibromooctane (1,8-DBO) exists in liquid phase at ambient temperatures and has versatile synthetic applications. In its liquid phase 1,8-DBO has been expected to exist in four most probable conformations, with all its carbon atoms in the same plane, having symmetries C 2h , C i , C 2 and C 1 . In the present study a detailed vibrational analysis in terms of assignment of Fourier transform infrared (FT-IR) and Raman bands of this molecule using normal co-ordinate calculations has been done. A systematic set of symmetry co-ordinates has been constructed for this molecule and normal co-ordinate analysis is carried out using the computer program MOLVIB. The force-field transferred from already studied lower chain bromo-alkanes is subjected to refinement so as to fit the observed infrared and Raman frequencies with those of calculated ones. The potential energy distribution (PED) has also been calculated for each mode of vibration of the molecule for the assumed conformations.

Architecture for novel energy infrastructures. Multi-agent based coordination patterns

International Nuclear Information System (INIS)

Kamphuis, I.G.; Kok, J.K.; Warmer, C.J.; Hommelberg, M.P.F.

2009-01-01

Due to the increased proportion of small renewable energy sources in a distributed setting (DG-RES), active control of small distributed energy producing and consuming systems will play an important role in future electricity grids. These distributed energy resources have production patterns, which are either partially stochastic (e.g. wind, solar cells) or are coupled to the primary user process (e.g. co-generation of heat and electricity). Furthermore, on the demand-side, and increasingly on the electricity storage side, opportunities exist for actively serving stability applications in the grid by real-time supply/demand coordination. In the future, an information and communication layer for grid coordination could serve a portfolio of ICT-applications on timescales running from seconds to hours. To get a grip on these (r)evolutionary developments, possibly toppling the electricity grid, in this paper, architecture requirements for future high proportion DG-RES electricity grids are collected from a Power Electronics System point of view as well as from an ICT point of view using an inventory of business models in the power grid that focus on coordination of multiple small-scale DG-RES resources. Modeled from an ICT point-of-view, these give rise to architectures for applications that can successively be implemented in hardware and software as active components in the distribution grid. A number of possible grid control strategy coordination patterns (GCPs), which are defined in a generic, reusable manner, can be seen to emerge. GCPs, connected and intertwined to one another on several layers (physical, commercial) of the grid, together, can provide the framework for coordination in the overall intelligent grid. Bottom-up approaches of implementing coordination in future active grids appear to be the method of choice to use in implementing the GCPs. Software agents coordinating primary processes using market algorithms, as implemented in the Power

Foreign investment, organizational innovation and transformation in food supply chains : evidence from the Ethiopian barley sector

NARCIS (Netherlands)

Tefera, Delelegne Abera

2017-01-01

Driven by rapid urbanization, economic growth, and changes in consumption patterns, food chains in emerging and developing economies are experiencing a fundamental transformation process. This transformation is usually characterized by increased vertical coordination, growth of modern

A Review on Properties, Opportunities, and Challenges of Transformer Oil-Based Nanofluids

Directory of Open Access Journals (Sweden)

Muhammad Rafiq

2016-01-01

Full Text Available The mineral oil or synthetic oil in conjunction with paper is mainly being applied as dielectric medium in many of the high voltage apparatus. However, the advent of high voltage levels such high voltage alternating current (HVAC and high voltage direct current (HVDC has prompted researchers to direct their focus onto an insulation system which can bear the rising high voltage levels. The modern insulating liquid material development is guided by various factors such as high electrical insulation requirements and other safety and economic considerations. Therefore transformer manufacturer companies have to design transformers with these new specific requirements. The transformer oil-based nanofluids with improved dielectric and thermal properties have the potential to replace mineral oil base products in the market place. They are favorable because they function more superior than mineral oil and they contribute definite insulating and thermal gains. This paper reviews recent status of nanofluids use as transformer oils. The nanofluids used as transformer oils are presented and their advantages are described in comparison with mineral oil. The multiple experimental works carried out by different researchers are described, providing an overview of the current research conducted on nanofluids. In addition scope and challenges being confronted in this area of research are clearly presented.

Coordinated Voltage Control of a Wind Farm based on Model Predictive Control

DEFF Research Database (Denmark)

Zhao, Haoran; Wu, Qiuwei; Guo, Qinglai

2016-01-01

This paper presents an autonomous wind farm voltage controller based on Model Predictive Control (MPC). The reactive power compensation and voltage regulation devices of the wind farm include Static Var Compensators (SVCs), Static Var Generators (SVGs), Wind Turbine Generators (WTGs) and On...... are calculated based on an analytical method to improve the computation efficiency and overcome the convergence problem. Two control modes are designed for both voltage violated and normal operation conditions. A wind farm with 20 wind turbines was used to conduct case studies to verify the proposed coordinated...

Optimal Coordination of Automatic Line Switches for Distribution Systems

Directory of Open Access Journals (Sweden)

Jyh-Cherng Gu

2012-04-01

Full Text Available For the Taiwan Power Company (Taipower, the margins of coordination times between the lateral circuit breakers (LCB of underground 4-way automatic line switches and the protection equipment of high voltage customers are often too small. This could lead to sympathy tripping by the feeder circuit breaker (FCB of the distribution feeder and create difficulties in protection coordination between upstream and downstream protection equipment, identification of faults, and restoration operations. In order to solve the problem, it is necessary to reexamine the protection coordination between LCBs and high voltage customers’ protection equipment, and between LCBs and FCBs, in order to bring forth new proposals for settings and operations. This paper applies linear programming to optimize the protection coordination of protection devices, and proposes new time current curves (TCCs for the overcurrent (CO and low-energy overcurrent (LCO relays used in normally open distribution systems by performing simulations in the Electrical Transient Analyzer Program (ETAP environment. The simulation results show that the new TCCs solve the coordination problems among high voltage customer, lateral, feeder, bus-interconnection, and distribution transformer. The new proposals also satisfy the requirements of Taipower on protection coordination of the distribution feeder automation system (DFAS. Finally, the authors believe that the system configuration, operation experience, and relevant criteria mentioned in this paper may serve as valuable references for other companies or utilities when building DFAS of their own.

Determination of sulfur compounds in hydrotreated transformer base oil by potentiometric titration.

Science.gov (United States)

Chao, Qiu; Sheng, Han; Cheng, Xingguo; Ren, Tianhui

2005-06-01

A method was developed to analyze the distribution of sulfur compounds in model sulfur compounds by potentiometric titration, and applied to analyze hydrotreated transformer base oil. Model thioethers were oxidized to corresponding sulfoxides by tetrabutylammonium periodate and sodium metaperiodate, respectively, and the sulfoxides were titrated by perchloric acid titrant in acetic anhydride. The contents of aliphatic thioethers and total thioethers were then determined from that of sulfoxides in solution. The method was applied to determine the organic sulfur compounds in hydrotreated transformer base oil.

Automated calculation of point A coordinates for CT-based high-dose-rate brachytherapy of cervical cancer

Directory of Open Access Journals (Sweden)

Hyejoo Kang

2017-07-01

Full Text Available Purpose: The goal is to develop a stand-alone application, which automatically and consistently computes the coordinates of the dose calculation point recommended by the American Brachytherapy Society (i.e., point A based solely on the implanted applicator geometry for cervical cancer brachytherapy. Material and methods: The application calculates point A coordinates from the source dwell geometries in the computed tomography (CT scans, and outputs the 3D coordinates in the left and right directions. The algorithm was tested on 34 CT scans of 7 patients treated with high-dose-rate (HDR brachytherapy using tandem and ovoid applicators. A single experienced user retrospectively and manually inserted point A into each CT scan, whose coordinates were used as the “gold standard” for all comparisons. The gold standard was subtracted from the automatically calculated points, a second manual placement by the same experienced user, and the clinically used point coordinates inserted by multiple planners. Coordinate differences and corresponding variances were compared using nonparametric tests. Results: Automatically calculated, manually placed, and clinically used points agree with the gold standard to < 1 mm, 1 mm, 2 mm, respectively. When compared to the gold standard, the average and standard deviation of the 3D coordinate differences were 0.35 ± 0.14 mm from automatically calculated points, 0.38 ± 0.21 mm from the second manual placement, and 0.71 ± 0.44 mm from the clinically used point coordinates. Both the mean and standard deviations of the 3D coordinate differences were statistically significantly different from the gold standard, when point A was placed by multiple users (p < 0.05 but not when placed repeatedly by a single user or when calculated automatically. There were no statistical differences in doses, which agree to within 1-2% on average for all three groups. Conclusions: The study demonstrates that the automated algorithm

Thermally activated 3D to 2D structural transformation of [Ni2(en)2(H2O)6(pyr)]·4H2O flexible coordination polymer

International Nuclear Information System (INIS)

Begović, Nebojša N.; Blagojević, Vladimir A.; Ostojić, Sanja B.; Radulović, Aleksandra M.; Poleti, Dejan; Minić, Dragica M.

2015-01-01

Thermally activated 3D to 2D structural transformation of the binuclear [Ni 2 (en) 2 (H 2 O) 6 (pyr)]·4H 2 O complex was investigated using a combination of theoretical and experimental methods. Step-wise thermal degradation (dehydration followed by release of ethylene diamine) results in two layered flexible coordination polymer structures. Dehydration process around 365 K results in a conjugated 2D structure with weak interlayer connectivity. It was shown to be a reversible 3D to 2D framework transformation by a guest molecule, and rehydration of the dehydration product occurs at room temperature in saturated water vapor. Rehydrated complex exhibits lower dehydration temperature, due to decreased average crystalline size, with higher surface area resulting in easier release and diffusion of water during dehydration. Thermal degradation of dehydration around 570 K, results in loss of ethylene diamine, producing a related 2D layered polymer structure, without interconnectivity between individual polymer layers. - Highlights: • Reversible 3D to 2D framework topochemical transformation on dehydration around 365 K. • Resulting polymer exhibits 2D layered structure with weak interlayer connectivity. • Dehydration is fully reversible in saturated water vapor at room temperature. • Further degradation around 570 K yields 2D polymer without interlayer connectivity. • 2D polymer exhibits conjugated electronic system

Launching and controlling Gaussian beams from point sources via planar transformation media

Science.gov (United States)

Odabasi, Hayrettin; Sainath, Kamalesh; Teixeira, Fernando L.

2018-02-01

Based on operations prescribed under the paradigm of complex transformation optics (CTO) [F. Teixeira and W. Chew, J. Electromagn. Waves Appl. 13, 665 (1999), 10.1163/156939399X01104; F. L. Teixeira and W. C. Chew, Int. J. Numer. Model. 13, 441 (2000), 10.1002/1099-1204(200009/10)13:5%3C441::AID-JNM376%3E3.0.CO;2-J; H. Odabasi, F. L. Teixeira, and W. C. Chew, J. Opt. Soc. Am. B 28, 1317 (2011), 10.1364/JOSAB.28.001317; B.-I. Popa and S. A. Cummer, Phys. Rev. A 84, 063837 (2011), 10.1103/PhysRevA.84.063837], it was recently shown in [G. Castaldi, S. Savoia, V. Galdi, A. Alù, and N. Engheta, Phys. Rev. Lett. 110, 173901 (2013), 10.1103/PhysRevLett.110.173901] that a complex source point (CSP) can be mimicked by parity-time (PT ) transformation media. Such coordinate transformation has a mirror symmetry for the imaginary part, and results in a balanced loss/gain metamaterial slab. A CSP produces a Gaussian beam and, consequently, a point source placed at the center of such a metamaterial slab produces a Gaussian beam propagating away from the slab. Here, we extend the CTO analysis to nonsymmetric complex coordinate transformations as put forth in [S. Savoia, G. Castaldi, and V. Galdi, J. Opt. 18, 044027 (2016), 10.1088/2040-8978/18/4/044027] and verify that, by using simply a (homogeneous) doubly anisotropic gain-media metamaterial slab, one can still mimic a CSP and produce Gaussian beam. In addition, we show that a Gaussian-like beams can be produced by point sources placed outside the slab as well. By making use of the extra degrees of freedom (the real and imaginary parts of the coordinate transformation) provided by CTO, the near-zero requirement on the real part of the resulting constitutive parameters can be relaxed to facilitate potential realization of Gaussian-like beams. We illustrate how beam properties such as peak amplitude and waist location can be controlled by a proper choice of (complex-valued) CTO Jacobian elements. In particular, the beam waist

Pedestrian detection based on redundant wavelet transform

Science.gov (United States)

Huang, Lin; Ji, Liping; Hu, Ping; Yang, Tiejun

2016-10-01

Intelligent video surveillance is to analysis video or image sequences captured by a fixed or mobile surveillance camera, including moving object detection, segmentation and recognition. By using it, we can be notified immediately in an abnormal situation. Pedestrian detection plays an important role in an intelligent video surveillance system, and it is also a key technology in the field of intelligent vehicle. So pedestrian detection has very vital significance in traffic management optimization, security early warn and abnormal behavior detection. Generally, pedestrian detection can be summarized as: first to estimate moving areas; then to extract features of region of interest; finally to classify using a classifier. Redundant wavelet transform (RWT) overcomes the deficiency of shift variant of discrete wavelet transform, and it has better performance in motion estimation when compared to discrete wavelet transform. Addressing the problem of the detection of multi-pedestrian with different speed, we present an algorithm of pedestrian detection based on motion estimation using RWT, combining histogram of oriented gradients (HOG) and support vector machine (SVM). Firstly, three intensities of movement (IoM) are estimated using RWT and the corresponding areas are segmented. According to the different IoM, a region proposal (RP) is generated. Then, the features of a RP is extracted using HOG. Finally, the features are fed into a SVM trained by pedestrian databases and the final detection results are gained. Experiments show that the proposed algorithm can detect pedestrians accurately and efficiently.

A coordinate transform method for one-speed neutron transport in composite slabs

International Nuclear Information System (INIS)

Haidar, N.H.S.

1988-01-01

The optical path transformation is applied to reduce the one-speed neutron transport equation for a class of composite subcritical slabs to single-region problems. The class idealises, within the uncertainty of the one-speed model, a variety of practical situations such as U-D 2 O-C-Zr-Pb or Pu-U-Na-Fe symmetric reactor assemblies; which may possibly contain a symmetrically anisotropic neutron source. A closed form double series solution, which turns out to be quite convenient for design and optimisation purposes, has been obtained, in terms of discontinuous functions for the multi-regional angular flux by application of a double finite Legendre transform. Disadvantage factor evaluations for a U-C lattice cell resulting from a low-order P 0 P 1 approximation of this method are found to be in full agreement with hybrid diffusion-transport estimates. (author)

New 3-D coordination polymers based on semi-rigid V-shape tetracarboxylates