Safety management in multiemployer worksites in the manufacturing industry: opinions on co-operation and problems encountered.

Science.gov (United States)

Nenonen, Sanna; Vasara, Juha

2013-01-01

Co-operation between different parties and effective safety management play an important role in ensuring safety in multiemployer worksites. This article reviews safety co-operation and factors complicating safety management in Finnish multiemployer manufacturing worksites. The paper focuses on the service providers' opinions; however, a comparison of the customers' views is also presented. The results show that safety-related co-operation between providers and customers is generally considered as successful but strongly dependent on the partner. Safety co-operation is provided through, e.g., training, orientation and risk analysis. Problems encountered include ensuring adequate communication, identifying hazards, co-ordinating work tasks and determining responsibilities. The providers and the customers encounter similar safety management problems. The results presented in this article can help companies to focus their efforts on the most problematic points of safety management and to avoid common pitfalls.

Arrangement between the US Nuclear Regulatory Commission (USNRC) and the Belgian Government for Exchange of Technical Information in Regulatory Matters and in Cooperation in Safety Research and in Standards Development

International Nuclear Information System (INIS)

1978-01-01

This Arrangement was concluded on 6 June 1978 between the United States Nuclear Regulatory Commission and the Belgian Government for exchange of technical information in regulatory matters and in co-operation in safety research and in standards development. Both Parties agree to exchange, as available, technical information related to the regulation of safety and the environmental impact of designated nuclear energy facilities and to safety research of designated types of nuclear facilities. As regards co-operation in safety research, the execution of joint programmes and projects under which activities are divided between the two Parties will be agreed on a case by case basis. The Parties further agree to co-operate in the development of regulatory standards applicable to the designated nuclear facilities. The Arrangement is valid for 5 years and may be extended. (NEA) [fr

Regional cooperation on nuclear safety

International Nuclear Information System (INIS)

Kato, W.Y.; Chen, J.H.; Kim, D.H.; Simmons, R.B.V.; Surguri, S.

1985-01-01

A review has been conducted of a number of multi-national and bilateral arrangements between governments and between utility-sponsored organizations which provide the framework for international cooperation in the field of nuclear safety. These arrangements include the routine exchange operational data, experiences, technical reports and regulatory data, provision of special assistance when requested, collaboration in safety research, and the holding of international conferences and seminars. Areas which may be better suited for cooperation on a regional basis are identified. These areas include: exchange of operational data and experience, sharing of emergency planning information, and collaboration in safety research. Mechanisms to initiate regional cooperation in these areas are suggested

Frontex Working Arrangements: Legitimacy and Human Rights Concerns Regarding ‘Technical Relationships’

Directory of Open Access Journals (Sweden)

Melanie Fink

2012-06-01

Full Text Available Practices of extraterritorialisation have become cornerstones of the European Union member states' border control. Most of them are highly dependent on the willingness of third countries to cooperate. An increasingly important phenomenon is that cooperation is secured through relationships established by administrative authorities. This article deals with the challenges arising from the active engagement of Frontex in setting up cooperation structures.It is argued that the so-called working arrangements concluded between Frontex and the respective authorities of third countries, in their current form, show considerable deficiencies from the perspectives of the rule of law, democracy and human rights protection. They are not open to judicial review, the Parliament is not involved in their conclusion and they are not disclosed to the public. Furthermore, the human rights record of cooperating authorities is not considered. Concerns in this respect are frequently attempted to be dispelled by recourse to the 'technical' as opposed to 'political' nature of working arrangements. Likewise, it is assumed that merely 'technical relationships' cannot affect individuals. These arguments are not convincing. Quite the contrary, the political implications of working arrangements and their operation in a highly human rights sensitive field demand conformity with the fundamental values the European Union is based on.

Non-cooperative and cooperative solutions of government subsidy on public transportation

Directory of Open Access Journals (Sweden)

Husniah Hennie

2018-01-01

Full Text Available The paper deals with two models of government subsidy given to a public transport operator: (i the subsidy for buying bus from an appointed public transport manufacturer, and (ii the subsidy for reimbursing reduced ticket price for passengers. The models are developed to determine the maximum profit for both the public transport operator and the manufacturer. Since we consider two parties – the public transport operator and the manufacturer of the bus, then we use game theoretical approach by considering non-cooperative and cooperative solutions. Furthermore, since the bus is repairable we consider virtual age to model the preventive maintenance and we consider minimal repair to model the corrective maintenance. We analyse both type of subsidy models and give some numerical examples which show the effects of different subsidies to the profit of operator and manufacturer. The result of the numerical examples indicates that reducing ticket price would give a higher profit both to the operator and the manufacturer.

Organizational choices for international cooperation: East-West European cooperation on regional environmental problems

Science.gov (United States)

Connolly, Barbara Mary

This dissertation applies theoretical insights from transaction cost economics to explain and predict the organizational form of cooperative agreements between Eastern and Western Europe in areas of regional environmental and political concern. It examines five contracting problems related to nuclear power safety and acid rain, and describes the history of international negotiations to manage these problems. It argues that the level of interdependence in a given issue area, or costly effects experienced in one state due to activities and decisions of other states, along with the level of transactional vulnerability, or sunk costs invested in support of a particular contractual relationship among these states, are key determinants of the governance structures states choose to facilitate cooperation in that issue area. Empirically, the dissertation traces the evolution of three sets of institutional arrangements related to nuclear safety: governance for western nuclear safety assistance to Eastern Europe, negotiations of a global convention on safety standards for nuclear power plants, and contracts among utilities and multilateral banks to build new nuclear power plants in Eastern Europe. Next it studies European acid rain, chronicling the history of international acid rain controls within the UNECE Convention on Long-Range Transboundary Air Pollution (LRTAP) and the European Union, and finally examining institutional arrangements for burden-sharing to promote European bargains on emissions reduction, including bilateral aid transfers and proposals for multilateral burden sharing. Political actors have a wide range of choice among institutional arrangements to facilitate international cooperation, from simple market-type exchanges, to arbitration-type regimes that provide information and enhance reputation effects, to self-enforcing agreements such as issue-linkage, to supranational governance. The governance structures states devise to manage their cooperative

Concepts for institutional arrangements for the nuclear fuel cycle

International Nuclear Information System (INIS)

1979-02-01

These concepts deal with establishing a framework for the analysis of institutional arrangements, with institutional arrangements under consideration in the working groups on fuel and heavy water availability, enrichment availability, assurances of long-term supply, reprocessing-plutonium handling-recycling, fast breeder reactors, spent fuel management, waste management and disposal, and advanced reactor concepts. The standardization of nuclear practices, joint commercial and development undertakings, nuclear supply assurances, developing a consensus in international nuclear co-operation, and settlements of disputes are treated

27 CFR 6.52 - Cooperative advertising.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Cooperative advertising. 6..., DEPARTMENT OF THE TREASURY LIQUORS âTIED-HOUSEâ Unlawful Inducements Paying for Advertising, Display Or Distribution Service § 6.52 Cooperative advertising. An arrangement in which an industry member participates...

Registered manufacturers of renewable energy devices

International Nuclear Information System (INIS)

Anon.

1992-01-01

Registered manufacturers of renewable energy devices in India are listed. The list is arranged under the headings : solar water heating system, solar cooker, solar still and water pumping wind mill. In all 38 manufacturers are listed. The list gives the postal address, name of the contact person and phone number of each manufacturer. (M.G.B.)

Cooperative Advertising in a Supply Chain with Horizontal Competition

Directory of Open Access Journals (Sweden)

Yi He

2013-01-01

Full Text Available Cooperative advertising programs are usually provided by manufacturers to stimulate retailers investing more in local advertising to increase the sales of their products or services. While previous literature on cooperative advertising mainly focuses on a “single-manufacturer single-retailer” framework, the decision-making framework with “multiple-manufacturer single-retailer” becomes more realistic because of the increasing power of retailers as well as the increased competition among the manufacturers. In view of this, in this paper we investigate the cooperative advertising program in a “two-manufacturer single-retailer” supply chain in three different scenarios; that is, (i each channel member makes decisions independently; (ii the retailer is vertically integrated with one manufacturer; (iii two manufacturers are horizontally integrated. Utilizing differential game theory, the open-loop equilibrium-advertising strategies of each channel member are obtained and compared. Also, we investigate the effects of competitive intensity on the firm’s profit in three different scenarios by using the numerical analysis.

Managing the evolution of cooperation

OpenAIRE

Dormann, Julian; Ehrmann, Thomas

2008-01-01

Management scholars have long stressed the importance of evolutionary processses for inter-firm cooperation but have mostly missed the promising opportunity to incorporate ideas from evolutionary theories into the analysis of collaborative arrangements. In this paper, we first present three rules for the evolution of cooperation - kinship selection, direct reciprocity, and indirect reciprocity. Second, we apply our theoretical considerations, enriched with ideas from cultural anthropology, to...

CANDU fuel : design/manufacturing interaction

International Nuclear Information System (INIS)

Graham, N.A.

1999-01-01

The design of CANDU fuel has been the product of intense cooperation among fuel designers and fuel manufacturers. The developments of some of the novel processes in fuel manufacture are outlined. These include the brazed-split-spacer design, the resistance welded endcap and CANLUB coatings. (author)

International cooperation in production inspections

International Nuclear Information System (INIS)

Limousin, S.

2009-01-01

Nuclear pressure equipment, like the reactor pressure vessel or steam generators, are manufactured in many countries all around the world. As only few reactors were built in the 90's, most of the nuclear safety authorities have lost part of their know how in component manufacturing oversight. For these two reasons, vendor inspection is a key area for international cooperation. On the one hand, ASN has bilateral relationships with several countries (USA, Finland, China...) to fulfill specific purposes. On the other hand, ASN participates in international groups like the MDEP ( Multinational Design Evaluation Program). A MDEP working group dedicated to vendor inspection cooperation enables exchanges of informations (inspection program plan, inspection findings...) among the regulators. Join inspections are organized. International cooperation could lead in the long term to an harmonization of regulatory practices. (author)

BEPS Action 2: Neutralizing the Effects on Hybrid Mismatch Arrangements

NARCIS (Netherlands)

de Boer, R.; Marres, O.

2015-01-01

Curbing tax arbitrage is one of the main priorities of the Organization for Economic Cooperation and Development (OECD) (endorsed by the G20 and the G8) ever since the public debate on base erosion fully erupted. Neutralizing the effect of hybrid mismatch arrangements has become Action No. 2 of the

LEAN Manufacturing

DEFF Research Database (Denmark)

Bilberg, Arne

. The mission with the strategy is to obtain competitive production in Denmark and in Western Europe based on the right combination of manufacturing principles, motivated and trained employees, level of automation, and cooperation with suppliers and customers worldwide. The strategy has resulted in technical...

16 CFR 307.10 - Cooperative advertising.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Cooperative advertising. 307.10 Section 307... REGULATIONS UNDER THE COMPREHENSIVE SMOKELESS TOBACCO HEALTH EDUCATION ACT OF 1986 Advertising Disclosures § 307.10 Cooperative advertising. The Act prohibits any manufacturer, packager, or importer of smokeless...

Followings of nuclear cooperation with India

International Nuclear Information System (INIS)

Nahla, Nasr

2009-01-01

This article speaks about the agreements of nuclear cooperation between India and USA,France and Russia. The Nuclear Suppliers Group,NSG, opened the door to the civil nuclear commercial with India, with the support of Canada, after 35 years of forbidden. The responsibility of NSG and any country enters in new arrangements for nuclear civil cooperation with India to assure the action of India towards its commitments to support world efforts for non-nuclear proliferation

Micro-level explanations for emergent patterns of self-governance arrangements in small-scale fisheries-A modeling approach.

Directory of Open Access Journals (Sweden)

Emilie Lindkvist

Full Text Available Small-scale fisheries (SSFs in developing countries are expected to play a significant role in poverty alleviation and enhancing food security in the decades to come. To realize this expectation, a better understanding of their informal self-governance arrangements is critical for developing policies that can improve fishers' livelihoods and lead to sustainable ecosystem stewardship. The goal of this paper is to develop a more nuanced understanding of micro-level factors-such as fishers' characteristics and behavior-to explain observed differences in self-governance arrangements in Northwest Mexico. We focus on two ubiquitous forms of self-governance: hierarchical non-cooperative arrangements between fishers and fishbuyers, such as patron-client relationships (PCs, versus more cooperative arrangements amongst fishers, such as fishing cooperatives (co-ops. We developed an agent-based model of an archetypical SSF that captures key hypotheses from in-depth fieldwork in Northwest Mexico of fishers' day-to-day fishing and trading. Results from our model indicate that high diversity in fishers' reliability, and low initial trust between co-op members, makes co-ops' establishment difficult. PCs cope better with this kind of diversity because, in contrast to co-ops, they have more flexibility in choosing whom to work with. However, once co-ops establish, they cope better with seasonal variability in fish abundance and provide long-term security for the fishers. We argue that existing levels of trust and diversity among fishers matter for different self-governance arrangements to establish and persist, and should therefore be taken into account when developing better, targeted policies for improved SSFs governance.

Micro-level explanations for emergent patterns of self-governance arrangements in small-scale fisheries-A modeling approach.

Science.gov (United States)

Lindkvist, Emilie; Basurto, Xavier; Schlüter, Maja

2017-01-01

Small-scale fisheries (SSFs) in developing countries are expected to play a significant role in poverty alleviation and enhancing food security in the decades to come. To realize this expectation, a better understanding of their informal self-governance arrangements is critical for developing policies that can improve fishers' livelihoods and lead to sustainable ecosystem stewardship. The goal of this paper is to develop a more nuanced understanding of micro-level factors-such as fishers' characteristics and behavior-to explain observed differences in self-governance arrangements in Northwest Mexico. We focus on two ubiquitous forms of self-governance: hierarchical non-cooperative arrangements between fishers and fishbuyers, such as patron-client relationships (PCs), versus more cooperative arrangements amongst fishers, such as fishing cooperatives (co-ops). We developed an agent-based model of an archetypical SSF that captures key hypotheses from in-depth fieldwork in Northwest Mexico of fishers' day-to-day fishing and trading. Results from our model indicate that high diversity in fishers' reliability, and low initial trust between co-op members, makes co-ops' establishment difficult. PCs cope better with this kind of diversity because, in contrast to co-ops, they have more flexibility in choosing whom to work with. However, once co-ops establish, they cope better with seasonal variability in fish abundance and provide long-term security for the fishers. We argue that existing levels of trust and diversity among fishers matter for different self-governance arrangements to establish and persist, and should therefore be taken into account when developing better, targeted policies for improved SSFs governance.

Micro-level explanations for emergent patterns of self-governance arrangements in small-scale fisheries—A modeling approach

Science.gov (United States)

Basurto, Xavier; Schlüter, Maja

2017-01-01

Small-scale fisheries (SSFs) in developing countries are expected to play a significant role in poverty alleviation and enhancing food security in the decades to come. To realize this expectation, a better understanding of their informal self-governance arrangements is critical for developing policies that can improve fishers’ livelihoods and lead to sustainable ecosystem stewardship. The goal of this paper is to develop a more nuanced understanding of micro-level factors—such as fishers’ characteristics and behavior—to explain observed differences in self-governance arrangements in Northwest Mexico. We focus on two ubiquitous forms of self-governance: hierarchical non-cooperative arrangements between fishers and fishbuyers, such as patron-client relationships (PCs), versus more cooperative arrangements amongst fishers, such as fishing cooperatives (co-ops). We developed an agent-based model of an archetypical SSF that captures key hypotheses from in-depth fieldwork in Northwest Mexico of fishers’ day-to-day fishing and trading. Results from our model indicate that high diversity in fishers’ reliability, and low initial trust between co-op members, makes co-ops’ establishment difficult. PCs cope better with this kind of diversity because, in contrast to co-ops, they have more flexibility in choosing whom to work with. However, once co-ops establish, they cope better with seasonal variability in fish abundance and provide long-term security for the fishers. We argue that existing levels of trust and diversity among fishers matter for different self-governance arrangements to establish and persist, and should therefore be taken into account when developing better, targeted policies for improved SSFs governance. PMID:28406935

Comparison of Cooperative and Noncooperative Purchasing in School Nutrition Programs

Science.gov (United States)

Rice, Beth W.; Strohbehn, Catherine; Shelly, Mark C.; Arendt, Susan; Gregoire, Mary

2010-01-01

Purpose/Objectives: The purpose of this study was to compare food cost and public school foodservice directors' satisfaction between districts participating in school foodservice cooperatives or group purchasing arrangements and districts purchasing independently. It also assessed the prevalence of purchasing cooperatives in school foodservice and…

An Ontology-Based Approach to Enable Knowledge Representation and Reasoning in Worker–Cobot Agile Manufacturing

Directory of Open Access Journals (Sweden)

Ahmed R. Sadik

2017-11-01

Full Text Available There is no doubt that the rapid development in robotics technology has dramatically changed the interaction model between the Industrial Robot (IR and the worker. As the current robotic technology has afforded very reliable means to guarantee the physical safety of the worker during a close proximity interaction with the IR. Therefore, new forms of cooperation between the robot and the worker can now be achieved. Collaborative/Cooperative robotics is the new branch of industrial robotics which empowers the idea of cooperative manufacturing. Cooperative manufacturing significantly depends on the existence of a collaborative/cooperative robot (cobot. A cobot is usually a Light-Weight Robot (LWR which is capable of operating safely with the human co-worker in a shared work environment. This is in contrast with the conventional IR which can only operate in isolation from the worker workspace, due to the fact that the conventional IR can manipulate very heavy objects, which makes it so dangerous to operate in direct contact with the worker. There is a slight difference between the definition of collaboration and cooperation in robotics. In cooperative robotics, both the worker and the robot are performing tasks over the same product in the same shared workspace but not simultaneously. Collaborative robotics has a similar definition, except that the worker and the robot are performing a simultaneous task. Gathering the worker and the cobot in the same manufacturing workcell can provide an easy and cheap method to flexibly customize the production. Moreover, to adapt with the production demands in the real time of production, without the need to stop or to modify the production operations. There are many challenges and problems that can be addressed in the cooperative manufacturing field. However, one of the most important challenges in this field is the representation of the cooperative manufacturing environment and components. Thus, in order to

International bilateral and multilateral arrangements in energy technologies

International Nuclear Information System (INIS)

1978-07-01

This document, the second report in the series, outlines current DOE international commitments under bilateral and multilateral arrangements, as of January 1, 1978. Included are bilateral agreements for cooperation in the civil uses of atomic energy with countries and international organizations, bilateral and multilateral technical exchanges in all energy technology areas, and multilateral agreements under the auspices of the International Energy Agency (IEA). In addition to outlining the terms, scope, and status of these agreements, this document describes DOE's participation in the work of the major international energy organizations. IEA, the International Atomic Energy Agency (IAEA), and the Nuclear Energy Agency (NEA). Future reports will update the status of ongoing cooperative projects and provide information on new energy R and D activities

Residential Fuel Cell Demonstration Handbook: National Rural Electric Cooperative Association Cooperative Research Network

Energy Technology Data Exchange (ETDEWEB)

Torrero, E.; McClelland, R.

2002-07-01

This report is a guide for rural electric cooperatives engaged in field testing of equipment and in assessing related application and market issues. Dispersed generation and its companion fuel cell technology have attracted increased interest by rural electric cooperatives and their customers. In addition, fuel cells are a particularly interesting source because their power quality, efficiency, and environmental benefits have now been coupled with major manufacturer development efforts. The overall effort is structured to measure the performance, durability, reliability, and maintainability of these systems, to identify promising types of applications and modes of operation, and to assess the related prospect for future use. In addition, technical successes and shortcomings will be identified by demonstration participants and manufacturers using real-world experience garnered under typical operating environments.

A cooperation model based on CVaR measure for a two-stage supply chain

Science.gov (United States)

Xu, Xinsheng; Meng, Zhiqing; Shen, Rui

2015-07-01

In this paper, we introduce a cooperation model (CM) for the two-stage supply chain consisting of a manufacturer and a retailer. In this model, it is supposed that the objective of the manufacturer is to maximise his/her profit while the objective of the retailer is to minimise his/her CVaR while controlling the risk originating from fluctuation in market demand. In reality, the manufacturer and the retailer would like to choose their own decisions as to wholesale price and order quantity to optimise their own objectives, resulting the fact that the expected decision of the manufacturer and that of the retailer may conflict with each other. Then, to achieve cooperation, the manufacturer and the retailer both need to give some concessions. The proposed model aims to coordinate the decisions of the manufacturer and the retailer, and balance the concessions of the two in their cooperation. We introduce an s* - optimal equilibrium solution in this model, which can decide the minimum concession that the manufacturer and the retailer need to give for their cooperation, and prove that the s* - optimal equilibrium solution can be obtained by solving a goal programming problem. Further, the case of different concessions made by the manufacturer and the retailer is also discussed. Numerical results show that the CM is efficient in dealing with the cooperations between the supplier and the retailer.

Overview of JSC “NIKIET” activity on ITER Procurement Arrangements

Energy Technology Data Exchange (ETDEWEB)

Leshukov, A.Yu., E-mail: leshu@nikiet.ru [Joint-Stock Company “N.A. Dollezhall Research and Development Institute of Power Engineering”, (JSC “NIKIET”), 107140, Malaya Krasnoselskaya 2/8, Moscow (Russian Federation); Dragunov, Yu. G.; Strebkov, Yu. S.; Kirillov, S.Yu.; Makarov, S.V.; Trofimovich, P.D.; Dubinin, G.V.; Maksimov, V.A.; Sviridenko, M.N.; Razmerov, A.V.; Parshutin, E.V.; Khomyakov, S.E.; Kolganov, V.Yu.; Zhmakin, A.V. [Joint-Stock Company “N.A. Dollezhall Research and Development Institute of Power Engineering”, (JSC “NIKIET”), 107140, Malaya Krasnoselskaya 2/8, Moscow (Russian Federation); Belyakov, V.A.; Mazul, I.V.; Gervash, A.A. [JSC “NIIEFA” (D.V. Efremov Institute), 189631, Doroga na Metallostroy, 3, S. Peterburg (Russian Federation); Safronov, V.M.; Romannikov, A.N. [Institution “Project Center ITER”,123182, Square of Academic Kurchatov 1, Moscow (Russian Federation); Eaton, R. [ITER Organization, Route de Vinon sur Verdon CS 90 046 − 13067 Saint Paul lez Durance (France); and others

2016-11-01

The two following ITER blanket-relevant Procurement Arrangements (PA) were signed by Russian Federation and ITER Organization in 2014: 1)1.6.P1ARF.01 “Blanket First Wall” (signed on 14-th of February, 2014); 2)1.6.P3.RF.01 “Blanket Module Connections” (signed on 19-th of December, 2014). The first PA is devoted to the development, manufacturing, testing and procuring to ITER site of 179 Enhanced Heat Flux (EHF) First Wall (FW) Panels. These FW panels are intended to withstand the heat flux from plasma up to 4.7 MW/m{sup 2}, and there are two institutions in Russian Federation responsible for the manufacturing, testing and delivering of these panels on the ITER site: JSC “NIIEFA” (Efremov Institute) and JSC “NIKIET”. JSC “NIIEFA” (Efremov Institute) will manufacture the plasma-facing components (PFC) of EHF FW Panels and perform the final assembling of the panels while JSC “NIKIET” will manufacture the FW beam structures, load-bearing structures of PFC and the all the elements of panel attachment system. As for the second PA (“Blanket Module Connectors”) the JSC “NIKIET” is the alone official Supplier and will manufacture and procure blanket flexible supports, electrical insulating key pads and shield block/vacuum vessel electrical connectors. This article briefly describes the joint activity of JSC “NIKIET” and Efremov Institute in the framework of 1.6.P1ARF.01 “Blanket First Wall” Procurement Arrangement and the material on the activity on the second PA. The main achievements on both PAs (during the period of 2014–2015) are presented and also critical issues and plans are underlined.

Current status and trends in performance-based risk-sharing arrangements between healthcare payers and medical product manufacturers.

Science.gov (United States)

Carlson, Josh J; Gries, Katharine S; Yeung, Kai; Sullivan, Sean D; Garrison, Louis P

2014-06-01

Our objective was to identify and characterize publicly available cases and related trends for performance-based risk-sharing arrangements (PBRSAs). We performed a review of PBRSAs over the past 20 years (1993-2013) using available databases and reports from colleagues and healthcare experts. These were categorized according to a previously published taxonomy of scheme types and assessed in terms of the underlying product and market attributes for each scheme. Macro-level trends were identified related to the timing of scheme adoption, countries involved, types of arrangements, and product and market factors. Our search yielded 148 arrangements. From this set, 65 arrangements included a coverage with an evidence development component, 20 included a conditional treatment continuation component, 54 included a performance-linked reimbursement component, and 42 included a financial utilization component. Each type of scheme addresses fundamental uncertainties that exist when products enter the market. The pace of adoption appears to be slowing, but new countries continue to implement PBRSAs. Over this 20-year period, there has been a consistent movement toward arrangements that minimize administrative burden. In conclusion, the pace of PBRSA adoption appears to be slowing but still has traction in many health systems. These remain a viable coverage and reimbursement mechanism for a wide range of medical products. The long-term viability and growth of these arrangements will rest in the ability of the parties to develop mutually beneficial arrangements that entail minimal administrative burden in their development and implementation.

27 CFR 19.753 - Record of article manufacture.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Record of article... Account § 19.753 Record of article manufacture. Each processor qualified to manufacture articles shall maintain daily records arranged by the name and authorized use code of the article to show the following...

HealthMarts, HIPCs (health insurance purchasing cooperatives), MEWAs (multiple employee welfare arrangements), and AHPs (association health plans): a guide for the perplexed.

Science.gov (United States)

Hall, M A; Wicks, E K; Lawlor, J S

2001-01-01

This paper considers how pending proposals to authorize new forms of group purchasing arrangements for health insurance would fit and function within the existing, highly complex market and regulatory landscape and whether these proposals are likely to meet their stated objectives and avoid unintended consequences. Cost savings are more likely to result from increased risk segmentation than through true market efficiencies. Thus, these proposals could erode previous market reforms whose goal is increased risk pooling. On the other hand, these proposals contain important enhancements, clarifications, and simplification of state and federal regulatory oversight of group purchasing vehicles. Also, they address some of the problems that have hampered the performance of purchasing cooperatives. On balance, although these proposals should receive cautious and careful consideration, they are not likely to produce a significant overall reduction in premiums or increase in coverage.

Analysis of the cooperative ATPase cycle of the AAA+ chaperone ClpB from Thermus thermophilus by using ordered heterohexamers with an alternating subunit arrangement.

Science.gov (United States)

Yamasaki, Takashi; Oohata, Yukiko; Nakamura, Toshiki; Watanabe, Yo-hei

2015-04-10

The ClpB/Hsp104 chaperone solubilizes and reactivates protein aggregates in cooperation with DnaK/Hsp70 and its cofactors. The ClpB/Hsp104 protomer has two AAA+ modules, AAA-1 and AAA-2, and forms a homohexamer. In the hexamer, these modules form a two-tiered ring in which each tier consists of homotypic AAA+ modules. By ATP binding and its hydrolysis at these AAA+ modules, ClpB/Hsp104 exerts the mechanical power required for protein disaggregation. Although ATPase cycle of this chaperone has been studied by several groups, an integrated understanding of this cycle has not been obtained because of the complexity of the mechanism and differences between species. To improve our understanding of the ATPase cycle, we prepared many ordered heterohexamers of ClpB from Thermus thermophilus, in which two subunits having different mutations were cross-linked to each other and arranged alternately and measured their nucleotide binding, ATP hydrolysis, and disaggregation abilities. The results indicated that the ATPase cycle of ClpB proceeded as follows: (i) the 12 AAA+ modules randomly bound ATP, (ii) the binding of four or more ATP to one AAA+ ring was sensed by a conserved Arg residue and converted another AAA+ ring into the ATPase-active form, and (iii) ATP hydrolysis occurred cooperatively in each ring. We also found that cooperative ATP hydrolysis in at least one ring was needed for the disaggregation activity of ClpB. © 2015 by The American Society for Biochemistry and Molecular Biology, Inc.

Plainview Milk Cooperative Ingredient Recall

Data.gov (United States)

U.S. Department of Health & Human Services — This list includes products subject to recall in the United States since June 2009 related to products manufactured by Plainview Milk Products Cooperative.

Institutional arrangements in the emerging biodiesel industry: Case studies from Minas Gerais—Brazil

International Nuclear Information System (INIS)

Watanabe, Kassia; Bijman, Jos; Slingerland, Maja

2012-01-01

Connecting (small) family farmers to the emerging biodiesel industry requires careful design of the institutional arrangements between the producers of oil crops and the processing companies. According to institutional economics theory, the design of effective and efficient arrangements depends on production and transaction characteristics, the institutional environment, and the organizational environment supporting the transaction between producers and the industry. This paper presents a comparative study on two cases in the feedstock-for-biodiesel industry in the state of Minas Gerais, Brazil. The two case studies represent the production and transaction system of soybeans (Glycine max L. Merrill) and castor beans (Ricinus communis L.). Important elements of effective and efficient institutional arrangements are farmer collective action, availability of technical and financial support, and farmer experience with particular crops. - Highlights: ► We study institutional arrangements for feedstock transactions between family farmers and the biodiesel industry. ► We focussed on soybean and castor bean production and transaction systems. ► Institutional arrangements are affected by product and production characteristics. ► They are also affected by collective actions organizations such as cooperatives. ► Soybean involves lower transaction costs and therefore more simple arrangement than castor bean.

A more functional arrangement of the boards for a control room of a nuclear reactor

International Nuclear Information System (INIS)

Gemin, Yves.

1975-02-01

The attention of manufacturers of control and monitoring materials is attracted on the possible improvements to be effected in control board reading using a more rational arrangement of monitoring stations [fr

Modular high power diode lasers with flexible 3D multiplexing arrangement optimized for automated manufacturing

Science.gov (United States)

Könning, Tobias; Bayer, Andreas; Plappert, Nora; Faßbender, Wilhelm; Dürsch, Sascha; Küster, Matthias; Hubrich, Ralf; Wolf, Paul; Köhler, Bernd; Biesenbach, Jens

2018-02-01

A novel 3-dimensional arrangement of mirrors is used to re-arrange beams from 1-D and 2-D high power diode laser arrays. The approach allows for a variety of stacking geometries, depending on individual requirements. While basic building blocks, including collimating optics, always remain the same, most adaptations can be realized by simple rearrangement of a few optical components. Due to fully automated alignment processes, the required changes can be realized in software by changing coordinates, rather than requiring customized mechanical components. This approach minimizes development costs due to its flexibility, while reducing overall product cost by using similar building blocks for a variety of products and utilizing a high grade of automation. The modules can be operated with industrial grade water, lowering overall system and maintenance cost. Stackable macro coolers are used as the smallest building block of the system. Each cooler can hold up to five diode laser bars. Micro optical components, collimating the beam, are mounted directly to the cooler. All optical assembly steps are fully automated. Initially, the beams from all laser bars propagate in the same direction. Key to the concept is an arrangement of deflectors, which re-arrange the beams into a 2-D array of the desired shape and high fill factor. Standard multiplexing techniques like polarization- or wavelengths-multiplexing have been implemented as well. A variety of fiber coupled modules ranging from a few hundred watts of optical output power to multiple kilowatts of power, as well as customized laser spot geometries like uniform line sources, have been realized.

Sourcing for Quality: Cooperating with a Single Supplier or Developing Two Competing Suppliers?

Directory of Open Access Journals (Sweden)

Jingxian Chen

2016-01-01

Full Text Available Supplier efforts regarding product quality are an important issue in outsourcing and play a critical role in a manufacturer’s choice of sourcing strategy. Consider a manufacturer that wants to outsource the manufacturing of two substitute products to external suppliers. This paper studies the strategic interactions under two sourcing strategies: single and dual sourcing. A four-stage noncooperative game model is established to describe each member’s decisions. We further propose four decision scenarios: single sourcing with and without manufacturer quality investment sharing and dual sourcing when suppliers cooperate or do not cooperate on quality decisions. By the backward induction approach, we obtain analytical equilibrium solutions for each decision scenario. By comparing each pair of equilibrium profiles, we find that an appropriate proportion of quality investment sharing by the manufacturer can enable a cooperating strategy with a single supplier to be the dominant strategy. When the manufacturer does not want to share or does not want to share a relatively large portion of its supplier’s quality investment, it will always prefer to develop two competing suppliers when the cost of dual sourcing is sufficiently low. However, dual sourcing can be extremely risky for the manufacturer because the suppliers could provide a relatively low product quality level by cooperating on the quality decision to extract the manufacturer’s profit.

International cooperation in the field of reprocessing

International Nuclear Information System (INIS)

Busekist, O. von

1983-01-01

Following a definition of the concept of international cooperation, this paper discusses existing and possible legal and institutional arrangements in the reprocessing field, with particular reference to the legal framework set up for the European Company for the Chemical Processing of Irradiated Fuels (Eurochemic). (NEA) [fr

Flexible automated manufacturing for SMEs

DEFF Research Database (Denmark)

Grube Hansen, David; Bilberg, Arne; Madsen, Erik Skov

2017-01-01

SMEs are in general highly flexible and agile in order to accommodate the customer demands in the paradigm of High Mix-Low Volume manufacturing. The flexibility and agility have mainly been enabled by manual labor, but as we are entering the technology and data driven fourth industrial revolution......, where augmented operators and machines work in cooperation in a highly flexible and productive manufacturing system both an opportunity and a need has raised for developing highly flexible and efficient automation....

Collaborative action research: implementation of cooperative learning.

Science.gov (United States)

Smith-Stoner, Marilyn; Molle, Mary E

2010-06-01

Nurse educators must continually improve their teaching skills through innovation. However, research about the process used by faculty members to transform their teaching methods is limited. This collaborative study uses classroom action research to describe, analyze, and address problems encountered in implementing cooperative learning in two undergraduate nursing courses. After four rounds of action and reflection, the following themes emerged: students did not understand the need for structured cooperative learning; classroom structure and seating arrangement influenced the effectiveness of activities; highly structured activities engaged the students; and short, targeted activities that involved novel content were most effective. These findings indicate that designing specific activities to prepare students for class is critical to cooperative learning. Copyright 2010, SLACK Incorporated.

Arrangement between the International Atomic Energy Agency and the World Health Organization concerning the establishment and operation of a network of Secondary Standard Dosimetry Laboratories

International Nuclear Information System (INIS)

1986-01-01

The International Atomic Energy Agency (IAEA) and the World Health Organization (WHO), recognizing that they have been co-operating in the operation of a network of Secondary Standard Dosimetry Laboratories (the Network), established pursuant to a Working Arrangement, dated 5 April 1976; and desiring to continue this co-operation in accordance with Article V of the relationship agreement concluded by IAEA and WHO in 1959; hereby enter a new arrangement to guide their work in operating the Network and providing assistance, when needed, to individual Secondary Standard Dosimetry Laboratories (SSDLs). The purpose of this Arrangement is to set forth responsibilities of IAEA and WHO in the operation and support of the Network and to establish criteria for SSDLs

FY 2000 report on the research cooperation project on the research cooperative follow-up for development of the manufacturing technology supported by advanced and integrated information system through cooperation

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The manufacturing technology supported by advanced and integrated information system through cooperation (MATIC), that is, a project supporting the production technology including the international information system and CAD/CAM system, etc. was carried out from FY 1994 to FY 1998. From FY 1999, the follow-up project is being implemented for the spread of the MATIC results, support for the independent R and D and the technical guidance. China, Indonesia, Malaysia and Singapore participated in this project, by which the support and technical guidance were given in three fields: automobiles/the parts; household electric appliances/the parts; fiber/apparel. At present, each country is continuing its own activity for using the system developed in the MATIC project in its country. In this fiscal year, researchers were sent to each country for supporting the activities. Further, the MATIC follow-up committee was established to conduct the drawing-up of a business plan, grasp of the state of the spread/R and D, discussion about problems/subjects, comprehensive evaluation of the MATIC project, etc. (NEDO)

Discord amongst the wind turbine buyers with regard to Dutch wind turbine manufacturers

International Nuclear Information System (INIS)

Janse, F.

1992-01-01

In the Netherlands two medium-large manufacturers of wind turbines exist: NedWind (Hollandia Kloos) and Windmaster Nederland (Begemann Groep). Also Lagerwey, which constructs wind turbines for the private market (farmers, cooperatives), is important for the Dutch market and successfull in Germany. There is a tendency amongst the Dutch energy utilities, which cooperate in the foundation WindPlan, to buy wind turbines from foreign manufacturers. Some energy utilities want to take advantage of the most attractive offers, while others want to cooperate in building up a Dutch wind turbine industry. 5 ills

Egypt--United States cooperative energy assessment: report on preliminary discussions

Energy Technology Data Exchange (ETDEWEB)

1978-04-01

Egyptian and U.S. Government representatives met in Cairo during the period of February 14-22, 1978 to discuss a cooperative Egypt-U.S. assessment of the energy demand and supply options available to Egypt. This report summarizes those preliminary discussions. The discussions accomplished the following: the background and objectives of the U.S. initiative for a cooperative energy assessment with Egypt were explained; Egyptian electric energy activities and their priorities were presented; methods under consideration for the systematic identification and assessment of energy options available to Egypt were explained; the cooperation of Egyptian energy resource and planning organizations was assured; and arrangements to carry out the cooperative assessment were planned.

AFRA. African Regional Co-operative Agreement

International Nuclear Information System (INIS)

1994-04-01

This publication provides an outline of the African Regional Co-operation Agreement for research, development and training related to nuclear science and technology (AFRA). The agreement stems from an initiative of several African member states of the IAEA to get the agency to help establish an African regional arrangement which would be similar to arrangements which were already in place in the Asian and Latin American regions. Through this regional approach to development, AFRA seeks to accelerate moves toward self-sufficiency in scientific disciplines and appropriate technologies by coordinating intellectual and physical resources and disseminating innovative methods and practices in a cost-effective manner

Mobility, fitness collection, and the breakdown of cooperation

Science.gov (United States)

Gelimson, Anatolij; Cremer, Jonas; Frey, Erwin

2013-04-01

The spatial arrangement of individuals is thought to overcome the dilemma of cooperation: When cooperators engage in clusters, they might share the benefit of cooperation while being more protected against noncooperating individuals, who benefit from cooperation but save the cost of cooperation. This is paradigmatically shown by the spatial prisoner's dilemma model. Here, we study this model in one and two spatial dimensions, but explicitly take into account that in biological setups, fitness collection and selection are separated processes occurring mostly on vastly different time scales. This separation is particularly important to understand the impact of mobility on the evolution of cooperation. We find that even small diffusive mobility strongly restricts cooperation since it enables noncooperative individuals to invade cooperative clusters. Thus, in most biological scenarios, where the mobility of competing individuals is an irrefutable fact, the spatial prisoner's dilemma alone cannot explain stable cooperation, but additional mechanisms are necessary for spatial structure to promote the evolution of cooperation. The breakdown of cooperation is analyzed in detail. We confirm the existence of a phase transition, here controlled by mobility and costs, which distinguishes between purely cooperative and noncooperative absorbing states. While in one dimension the model is in the class of the voter model, it belongs to the directed percolation universality class in two dimensions.

Public funding of innovation R and D y cooperation and membership in printing industry

International Nuclear Information System (INIS)

Guisado Tato, M.; Vila, M.; Guisado Gonzalez, M.

2010-01-01

This paper contrasts how business cooperation at the level of R and D, the size and the membership in printing industry determine the participation of innovative manufacturing companies in the systems of public support for innovation. Material and methods. From the microdata of the survey on technological innovation 1998-2000, of the National Institute of Statistics (INE), a database is created by the manufacturing Spanish companies involved in innovation. Afterwards, by univariate and multivariate statistical methods, we contrast whether cooperation, size and membership in printing industry determine the participation of the manufacturing innovative companies in the systems of public support for innovation, as well as the direction of that conditioning. Results. The tests carried out indicate that more cooperation between companies at the level of a larger size have a positive influence on the degree of business involvement in the systems of public support for innovation.Discussion. Public administrations seek to foster the development of innovation among manufacturing companies facilitating by providing funds to the companies that cooperate in the area of I and D. Likewise, public support for innovation are targeting in larger firms, while the companies, belonging to the printing industry have less likely to obtain public funding for their innovative projects that the remaining companies of the Spanish manufacturing sector. (Author).

The role of physical space in labour–management cooperation

DEFF Research Database (Denmark)

Ilsøe, Anna; Felbo-Kolding, Jonas

2018-01-01

Many studies on labour–management relations have focused on formal cooperation in manufacturing. This calls for further research and theory development on labour–management interactions in private service companies, where cooperation practices appear to be less formal. In this article, a typology...... of cooperation between managers and employees is developed, based on a microsociological study conducted in the Danish retail trade in 2013. Drawing on six indepth case studies, the article identifies four different physical spaces of labour–management cooperation: open collective, closed collective, open...

Asbestos manufacturing plants in Poland

Directory of Open Access Journals (Sweden)

Wilk Ewa

2014-06-01

Full Text Available The unique set of physical and chemical properties of asbestos has led to its many industrial applications, such as roof coverings, textiles, rope, cord and yarn, paper, friction and composition materials, household product, acid-resistant filters, packing, insulation, and certain types of lagging, amongst others. In Poland asbestos-containing products were manufactured from raw materials imported mainly from the former Soviet Union, with production launched at the beginning of 20th century. According to Annex 4 to the Act of 19 June 1997 on the prohibition of the use of asbestos-containing products, there were 28 asbestos manufacturing plants in Poland located in 11 provinces throughout the country. The current survey was undertaken to enable asbestos manufacturing plants to be arranged, described and divided in order to contribute to further surveys.

Research cooperation project on manufacturing technology supported by advanced and integrated information system through international cooperation (MATIC); Kan`i sosagata denshi sekkei seisan shien system no kaihatsu ni kansuru kenkyu kyoryoku

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

To support the advancement of basic industries including machine industry in Asian countries, research cooperation has been conducted for developing the manufacturing technology supported by advanced and integrated information system suitable for actual circumstances of individual countries. For the automotive and the parts industries, it is significant for the preparation works of manufacturing in overseas factories to possess common information between Japan and overseas factories. In this project, a system is constructed, which can be used in industries surrounding automotive industry, such as parts and facility industries, as well as in the automotive industry. In FY 1996, a primary system has been developed, and the demonstration tests were carried out. For the home electric machine and the parts industries, the technology applicable to the design of printed board circuit was developed, and the catalog of electronic parts was constructed. In FY 1996, a preliminary prototype system of the electronic parts catalog system was designed and developed. For the textile and apparel industries, the EDI, exchange system of CAD/CAM data, and construction of data bank were investigated. 87 figs., 19 tabs.

76 FR 14405 - Agency Information Collection Activities; Proposed Collection; Comment Request; Guidance for...

Science.gov (United States)

2011-03-16

... cooperative manufacturing arrangements for licensed biologics. DATES: Submit either electronic or written... Public Health Service Act (42 U.S.C. 262). The guidance addresses several types of manufacturing... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No.FDA-2011-N-0085...

Manufacturing technology supported by advanced and integrated information system through international cooperation in fiscal 1994; Kan`i sosagata denshi sekkei seisan shien system no kaihatsu ni kansuru kenkyu kyoryoku

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-03-01

Among NEDO`s international research cooperation projects, the paper described Japan`s cooperation with Asian countries in development of an easy-operated electronic design/production supporting system. The project aims to realize information realtime technology by which data for design/manufacturing of machine/electronics/fiber/apparel can mutually be used among countries. For it, design data standard and electronic information exchange standard are developed. A production information integrated database system is developed for sharing processing data. Parts data are put into a library. Graphic user interface and multi-media technology are developed so as to comply with the environment of different usages. In fiscal 1994, emphasis of activities was placed on survey of the status quo of the institution of the party country, fermentation of mutual understanding, and study of a cooperative project plan. Memorandums on research cooperation were concluded with Indonesia, Malaysia, Singapore and Thailand. In addition, understanding of this project by the party country was able to be enhanced

Manufacturing and application of micro computer for control

International Nuclear Information System (INIS)

Park, Seung Man; Heo, Gyeong; Yun, Jun Young

1990-05-01

This book deals with machine code and assembly program for micro computer. It composed of 20 chapters, which are micro computer system, practice of a storage cell, manufacturing 1 of micro computer, manufacturing 2 of micro computer, manufacturing of micro computer AID-80A, making of machine language, interface like Z80-PIO and 8255A(PPI), counter and timer interface, exercise of basic command, arithmetic operation, arrangement operation, an indicator control, music playing, detection of input of PIO. control of LED of PIO, PIO mode, CTC control by micro computer, SIO control by micro computer and application by micro computer.

Challenges of technical cooperation in the petroleum industry

International Nuclear Information System (INIS)

Al-Athel, S.A.

1992-01-01

The need and prospects for international technical cooperation in the petroleum industry are reviewed. Since it directly affects the survival of the inhabitants of the planet, environmental protection is a field that could enjoy maximum international cooperation; oil spills, product environmental hazards, waste minimization and disposal and oil field fires are the main areas identified. Technical cooperation in other areas of the industry, namely exploration, production, oil field development, refining and petrochemicals, may involve some controversy. Attention is drawn to the conflicting interests of multinational companies, who almost completely control the technology of these activities, and host developing countries. It is advocated that arrangements involving technology transfer should make provision for the growth of indigenous technology. (UK)

78 FR 9775 - Cooper Tire & Rubber Company, Receipt of Petition for Decision of Inconsequential Noncompliance

Science.gov (United States)

2013-02-11

... subject tires in fact have more tread plies than indicated and meet or exceed all performance requirements...-0109; Notice 1] Cooper Tire & Rubber Company, Receipt of Petition for Decision of Inconsequential...: Cooper Tire & Rubber Company (Cooper),\\1\\ has determined that certain Cooper brand tires manufactured...

Manufacture of disposal canisters

International Nuclear Information System (INIS)

Nolvi, L.

2009-12-01

The report summarizes the development work carried out in the manufacturing of disposal canister components, and present status, in readiness for manufacturing, of the components for use in assembly of spent nuclear fuel disposal canister. The disposal canister consist of two major components: the nodular graphite cast iron insert and overpack of oxygen-free copper. The manufacturing process for copper components begins with a cylindrical cast copper billet. Three different manufacturing processes i.e. pierce and draw, extrusion and forging are being developed, which produce a seamless copper tube or a tube with an integrated bottom. The pierce and draw process, Posiva's reference method, makes an integrated bottom possible and only the lid requires welding. Inserts for BWR-element are cast with 12 square channels and inserts for VVER 440-element with 12 round channels. Inserts for EPR-elements have four square channels. Casting of BWR insert type has been studied so far. Experience of casting inserts for PWR, which is similar to the EPR-type, has been got in co-operation with SKB. The report describes the processes being developed for manufacture of disposal canister components and some results of the manufacturing experiments are presented. Quality assurance and quality control in manufacture of canister component is described. (orig.)

Status of international cooperation in nuclear technology on testing/research reactors between JAEA and INP-NNC

International Nuclear Information System (INIS)

Kawamura, Hiroshi; Tsuchiya, Kunihiko; Takemoto, Noriyuki; Kimura, Akihiro; Tanimoto, Masataka; Izumo, Hironobu; Chakrov, Petr; Gizatulin, Shamil; Chakrova, Yelena; Ludmila, Chkushuina; Asset, Shaimerdenov; Nataliya, Romanova

2012-02-01

Based on the implementing arrangement between National Nuclear Center of the Republic of Kazakhstan (NNC) and the Japan Atomic Energy Agency (JAEA) for 'Nuclear Technology on Testing/Research Reactors' in cooperation in Research and Development in Nuclear Energy and Technology, four specific topics of cooperation (STC) have been carried out from June, 2009. Four STCs are as follows; (1) STC No.II-1 : International Standard of Instrumentation. (2) STC No.II-2 : Irradiation Technology of RI Production. (3) STC No.II-3 : Lifetime Expansion of Beryllium Reflector. (4) STC No.II-4 : Irradiation Technology for NTD-Si. The information exchange, personal exchange and cooperation experiments are carried out under these STCs. The status in the field of nuclear technology on testing/research reactors in the implementing arrangement is summarized, and future plans of these specific topics of cooperation are described in this report. (author)

Establishing a LEU MTR fuel manufacturing facility in South Africa

International Nuclear Information System (INIS)

Jamie, R.W.; Kocher, A.

2010-01-01

The South African MTR Fuel Manufacturing Facility was established in the 1970's to supply SAFARI-1 with Fuel Elements and Control Rods. South African capability was developed in parallel with the uranium enrichment program to meet the needs of the Reactor. Further to the July 2005 decision by the South African Governmnent to convert both SAFARI-1 and the Fuel Plant to LEU, the SAFARI-1 phase has been successfully completed and Necsa has commenced with the conversion of the MTR Fuel Manufacturing Facility. In order to establish, validate and qualify the facility, Necsa has entered into a co-operation and technology transfer agreement with AREVA CERCA, the French manufacturer of Research Reactor fuel elements. Past experiences, conversion challenges and the status of the MTR Fuel Facility Project are discussed. On-going co-operation with AREVA CERCA to implement the local manufacture of LEU fuel is explained and elaborated on. (author)

Self-reliance through regional co-operation

International Nuclear Information System (INIS)

Glubrecht, H.

1975-01-01

Article 52 of the Charter of the United Nations is concerned with the usefulness of Regional Arrangements which 'are appropriate for regional action'. Such arrangements need not be considered only with regard to their political aspects but also as organizational structures which can be helpful in the development of science and technology in less developed countries. The definition of a 'Region' can be difficult, but is easier if scientific rather than political co-operation is intended. The International Atomic Energy Agency has undertaken a first step in this direction through its Regional Co-operative Agreement for Research, Development and Training related to Nuclear Science and Technology in South and Southeast Asia, the Pacific and the Far East (RCA) which has been signed by six countries so far. This Agreement leaves it to the Member States to initiate cooperative projects. The IAEA will take steps to establish the project if at least three Member States are willing to participate. The implementation of the project will be defined by negotiations with the Member States and the IAEA will only play the role of a co-ordinator. Annual meetings of representatives of those countries which are parties of the RCA and of others from the region which might be interested in joining the Agreement provide the possibility of a continuing exchange of new ideas. Regional activities are also undertaken by means of 'Co-ordinated Research Programmes', which mostly include some co-operation with LDCs. The RCA has initiated two new ideas, that of carrying out the projects exclusively by the countries of the region and that of taking the step from co-ordination to cooperation by means of continuous and intensive exchange of information as well as of personnel. Its main objective is to aim at a reasonable division of labour between the parties and to use expensive equipment jointly. It is to be hoped that this venture will lead to an increasing degree of self-reliance within the

Good manufacturing practices for medicinal products for human use.

Science.gov (United States)

Gouveia, Bruno G; Rijo, Patrícia; Gonçalo, Tânia S; Reis, Catarina P

2015-01-01

At international and national levels, there are public and private organizations, institutions and regulatory authorities, who work and cooperate between them and with Pharmaceutical Industry, in order to achieve a consensus of the guidelines and laws of the manufacturing of medicinal products for human use. This article includes an explanation of how operate and cooperate these participants, between them and expose the current regulations, following the line of European Community/European Economic Area, referencing, wherever appropriate, the practiced guidelines, outside of regulatory action of space mentioned. In this way, it is intended to achieve quality, security and effectiveness exceptional levels in the manufacturing of health products. Good Manufacturing Practice aim the promotion of the human health and consequently, to the improvement of quality of life. For achieve the proposed objectives, it is necessary to ensure the applicability of the presented concepts and show the benefits arising from this applicability.

Good manufacturing practices for medicinal products for human use

Science.gov (United States)

Gouveia, Bruno G.; Rijo, Patrícia; Gonçalo, Tânia S.; Reis, Catarina P.

2015-01-01

At international and national levels, there are public and private organizations, institutions and regulatory authorities, who work and cooperate between them and with Pharmaceutical Industry, in order to achieve a consensus of the guidelines and laws of the manufacturing of medicinal products for human use. This article includes an explanation of how operate and cooperate these participants, between them and expose the current regulations, following the line of European Community/European Economic Area, referencing, wherever appropriate, the practiced guidelines, outside of regulatory action of space mentioned. In this way, it is intended to achieve quality, security and effectiveness exceptional levels in the manufacturing of health products. Good Manufacturing Practice aim the promotion of the human health and consequently, to the improvement of quality of life. For achieve the proposed objectives, it is necessary to ensure the applicability of the presented concepts and show the benefits arising from this applicability. PMID:25883511

Finnish experience on emergency preparedness co-operation work and results

International Nuclear Information System (INIS)

Sovijarvi, Jukka

2014-01-01

Document available in abstract form only. According to the 'Security Strategy for Society' the responsibilities are shared across society and the normal division of duties shall be maintained unchanged as far as possible in all situations. While the competent authority is always in charge of making decisions other administrative sectors may be cooperation partners. This applies to the representatives of business community and organization as well. The first regional co-operation group for NPP emergency preparedness consisting of the representatives of regional rescue service, NPP licensee and STUK was established in 2008 to develop the external rescue plan, arrange training etc. Today co-operation groups are working for both Finnish emergency planning zones. Examples of the co-operation results are discussed in the presentation. (author)

A Process Management System for Networked Manufacturing

Science.gov (United States)

Liu, Tingting; Wang, Huifen; Liu, Linyan

With the development of computer, communication and network, networked manufacturing has become one of the main manufacturing paradigms in the 21st century. Under the networked manufacturing environment, there exist a large number of cooperative tasks susceptible to alterations, conflicts caused by resources and problems of cost and quality. This increases the complexity of administration. Process management is a technology used to design, enact, control, and analyze networked manufacturing processes. It supports efficient execution, effective management, conflict resolution, cost containment and quality control. In this paper we propose an integrated process management system for networked manufacturing. Requirements of process management are analyzed and architecture of the system is presented. And a process model considering process cost and quality is developed. Finally a case study is provided to explain how the system runs efficiently.

Strengthening Clean Energy Technology Cooperation under the UNFCCC: Steps toward Implementation

Energy Technology Data Exchange (ETDEWEB)

Benioff, R.; de Coninck, H.; Dhar, S.; Hansen, U.; McLaren, J.; Painuly, J.

2010-08-01

Development of a comprehensive and effective global clean technology cooperation framework will require years of experimenting and evaluation with new instruments and institutional arrangements before it is clear what works on which scale and in which region or country. In presenting concrete examples, this paper aims to set the first step in that process by highlighting successful models and innovative approaches that can inform efforts to ramp up clean energy technology cooperation. This paper reviews current mechanisms and international frameworks for global cooperation on clean energy technologies, both within and outside of the UNFCCC, and provides selected concrete options for scaling up global cooperation on clean energy technology RD&D, enabling environment, and financing.

Research on Marketing Channel of Mobile Manufacturer Based on Analytic Hierarchy Process

Institute of Scientific and Technical Information of China (English)

XIONG Hui; LI Shi-ming; LAN Yong

2006-01-01

Research on "marketing channel" of mobile attracts much attention in these years,but there're only few articles referring to how to optimize the disposition of channel resources for mobile manufacturers. Based on a typically multiplex marketing channel system of mobile manufacturer, the analytic hierarchy process (AHP) structure model is established. Through the judgment matrix, simple and total hierarchy arrangement, consistent test, this paper gets the weight of each kind of marketing channel of mobile manufacturer. It provides the practical reference value for mobile manufacturers to distribute resources of marketing channels.

R&D Cooperation Between Firms---A Perceived Transaction Cost Perspective

OpenAIRE

Klaus Brockhoff

1992-01-01

Transaction cost is considered as an explanatory variable for the choice between markets and various organizational arrangements for performing some predefined tasks, such as engaging in private R&D. With respect to R&D cooperation between firms, we show that the perception of high transaction cost is related to certain characteristics of the firm and to the type of R&D task. We also show a relationship between the perception of transaction cost and the perceived success of the cooperation. T...

To Cooperate or Not? An Analysis of Complementary Product Pricing in Green Supply Chain

Directory of Open Access Journals (Sweden)

Jie Wei

2018-05-01

Full Text Available This paper investigates the green supply chain pricing problem when two manufacturers sell complementary products to one retailer. Considering the manufacturers’ cooperation or noncooperation strategies, we first give the centralized pricing model as a benchmark. According to market power among the supply chain, we analyze two types of supply chains: supplier-led type where the green driving factor comes from the suppliers and retailer-led type where the core member retailer leads the green supply chain. We then give two decentralized pricing models through considering strategic cooperation between two manufacturers and different structures. Corresponding closed-form expressions for equilibrium pricing strategies are established. Finally, many valuable managerial results are acquired through comparing the profits and equilibrium decisions of these models. Our paper shows that consumers are indifferent as to who is the leader of the two echelons when the manufacturers adopt non-cooperative action; the two complementary products get the same optimal wholesale/retail prices, maximum retail margins, and maximum demands regardless of the manufacturers’ cooperation or noncooperation strategies.

One-step manufacturing of innovative flat-knitted 3D net-shape preforms for composite applications

Science.gov (United States)

Bollengier, Quentin; Wieczorek, Florian; Hellmann, Sven; Trümper, Wolfgang; Cherif, Chokri

2017-10-01

Mostly due to the cost-intensive manually performed processing operations, the production of complex-shaped fibre reinforced plastic composites (FRPC) is currently very expensive and therefore either restricted to sectors with high added value or for small batch applications (e.g. in the aerospace or automotive industry). Previous works suggest that the successful integration of conventional textile manufacturing processes in the FRPC-process chain is the key to a cost-efficient manufacturing of complex three-dimensional (3D) FRPC-components with stress-oriented fibre arrangement. Therefore, this work focuses on the development of the multilayer weft knitting technology for the one-step manufacturing of complex 3D net-shaped preforms for high performance FRPC applications. In order to highlight the advantages of net-shaped multilayer weft knitted fabrics for the production of complex FRPC parts, seamless preforms such as 3D skin-stringer structures and tubular fabrics with load oriented fibre arrangement are realised. In this paper, the development of the textile bindings and performed technical modifications on flat knitting machines are presented. The results show that the multilayer weft knitting technology meets perfectly the requirements for a fully automated and reproducible manufacturing of complex 3D textile preforms with stress-oriented fibre arrangement.

Experienced Barriers to Lean in Swedish Manufacturing and Health Care

Directory of Open Access Journals (Sweden)

Bengt Halling

2013-12-01

Full Text Available The purpose is to compare similarities and divergences in how the concepts of Lean and barriers to Lean are described by key informants at a production unit in a large manufacturing company and two emergency health care units in Sweden. Data was collected via semi-structured interviews and analyzed with the constant comparative method (CCM and Porras and Robertson’s (1992 change model. : In both organizations, the view of Lean changed from a toolbox to a human behavior view. Eight barriers were experienced in both organizations. Three barriers were unique to manufacturing or to health care, respectively. Nine barriers were elements of social factors; five were elements of organizing arrangements. Only people practically involved and responsible for the implementation at the two organizations participated in the study. Persons responsible for implementing Lean should consider organizational arrangements and social factors in order to limit barriers to successful implementation. Most research on Lean has been about successful Lean implementations. This study focuses on how Lean is viewed and what barriers personnel in manufacturing and health care have experienced. In comparing the barriers to Lean experienced in the two groups, common, archetypical, and unique barriers for manufacturing and health care can be identified, thus contributing to knowledge about barriers to Lean implementation.

Green Manufacturing

Energy Technology Data Exchange (ETDEWEB)

Patten, John

2013-12-31

Green Manufacturing Initiative (GMI): The initiative provides a conduit between the university and industry to facilitate cooperative research programs of mutual interest to support green (sustainable) goals and efforts. In addition to the operational savings that greener practices can bring, emerging market demands and governmental regulations are making the move to sustainable manufacturing a necessity for success. The funding supports collaborative activities among universities such as the University of Michigan, Michigan State University and Purdue University and among 40 companies to enhance economic and workforce development and provide the potential of technology transfer. WMU participants in the GMI activities included 20 faculty, over 25 students and many staff from across the College of Engineering and Applied Sciences; the College of Arts and Sciences' departments of Chemistry, Physics, Biology and Geology; the College of Business; the Environmental Research Institute; and the Environmental Studies Program. Many outside organizations also contribute to the GMI's success, including Southwest Michigan First; The Right Place of Grand Rapids, MI; Michigan Department of Environmental Quality; the Michigan Department of Energy, Labor and Economic Growth; and the Michigan Manufacturers Technical Center.

Test manufacture of a canister insert

International Nuclear Information System (INIS)

Raiko, H.

2004-11-01

This report describes the insert-manufacturing test of a disposal canister for spent nuclear fuel that was made by Metso Paper Oy, Jyvaeskylae Foundry, in 2003 on contract for Posiva Oy. The test manufacture was a part of the co-operation development programme of encapsulation technology between SKB AB and Posiva Oy. Insert casting was specified according to the current manufacturing specifications of SKB. The canister insert was of BWR-type with integral bottom. This was the first trial manufacture of this type of insert in Finland and, in total, the second test manufacture of insert by Metso Paper. The result fulfilled all the requirements but the material mechanical properties and metallurgical structure of the cast material. The measured tensile strength, ultimate strength and elongation at rupture were lower than specified. The reason for this was revealed in the metallurgical investigation of the cast material. The nodulizing of the graphite was not occurred during the casting process according to the requirements. (orig.)

Strengthening ASEAN+3 Regional Financial Arrangements: A New Framework Beyond CMIM

Directory of Open Access Journals (Sweden)

Young-Joon Park

2017-03-01

Full Text Available This paper examines the operational limitations of the Chiang Mai Initiative Multilateralization (CMIM as a regional financial safety net in East Asia and presents a new regional financial arrangement. To overcome the drawbacks of the Chiang Mai Initiative Multilateralization which has never been activated so far, this study proposes that ASEAN+3 establish a new lending facility, so-called a Reserve Fund Facility, and create a regional common reserves asset. The proposed Reserve Fund Facility framework guarantees lending automaticity of the liquidity facility, based on upfront funding instead of pledge funding. Establishing the Reserve Fund Facility could find a way of making up for weakness of the Chiang Mai Initiative Multilateralization and responding to the regional needs for effective regional financial arrangement. The full-fledged Reserve Fund Facility will ultimately contribute to the future development of East Asia's monetary and financial cooperation beyond the Chiang Mai Initiative Multilateralization.

Report of cooperative research programs in the field of ion-beam breeding between Japan Atomic Energy Agency and Malaysian Nuclear Agency (Bilateral cooperative research)

International Nuclear Information System (INIS)

Ahmad, Zaiton; Oono, Yutaka

2016-03-01

This report summarizes Bilateral Cooperative Research between Japan Atomic Energy Agency and Malaysian Nuclear Agency (a representative of the Government of Malaysia) implemented from 2002 to 2012 under 'THE IMPLEMENTING ARRANGEMENT BETWEEN THE GOVERNMENT OF MALAYSIA AND THE JAPAN ATOMIC ENERGY AGENCY ON THE RESEARCH COOPERATION IN THE FIELD OF RADIATION PROCESSING'. The research activities in two Cooperative Research Programs, 'Mutation Induction of Orchid Plants by Ion Beams' and 'Generating New Ornamental Plant Varieties Using Ion Beams' performed 2002-2007 and 2007-2012, respectively, are contained. The lists of steering committee meetings, irradiation experiments, and publications/presentations of each program are also attached in the Appendixes. (author)

Method of Manufacturing A Porous Polymer Component Involving Use of A Dissolvable, Sacrificial Material

DEFF Research Database (Denmark)

2015-01-01

and thereby the resulting inner structure of the component 1 is arranged in a controlled and reproducible manner. The sacrificial material 2 and possibly also the component material 3 may e.g. be arranged by use of a 3D-printer or manually. The method may e.g. be used to manufacture a three...

International co-operation. Key issue paper no. 6

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-06-01

In accordance with guidance provided by the Steering Group, this report assesses the adequacy and effectiveness of international co-operation relating to the nuclear fuel cycle, with a view toward identifying any needed new forms or arrangements for co-operation. In more specific terms, the Steering Committee`s guidance identified the following questions: Is the existing international framework sufficient for: the safe and secure operation of the fuel cycle; the economic and orderly development of the world`s nuclear energy systems (or their phase-out should this take place); international co-operation in R and D; international co-operation in industrial activities? Are there places where these requirements overlap or interact so as to impede activities which are desirable? Can new forms of co-operation be foreseen which would make it easier to implement any of the fuel cycle options in a safe, secure and responsible way? Are there other new forms of international co-operation which would affect the fuel cycle, e.g. regional institutions; international plutonium management regime and/or storage? Finally: What is the appropriate role of IAEA in any of these?.

The Role of In-Class Physical Arrangements in Supporting Preschool Children's Behavior Regulation Skill

Science.gov (United States)

Erturk Kara, H. Gozde

2018-01-01

The purpose of this research is to understand the role of physical arrangements within the classroom in the development of behavior regulation skill of preschool children. From among the types of action research, the technical/scientific/cooperative action research was employed in the current study. In the selection of the participants, one of the…

Renforcement de la coopération scientifique européenne: La Commission signe un Arrangement administratif avec le CERN

CERN Multimedia

CERN Press Office. Geneva

1994-01-01

On 10 October 1994, Professor Antonio Ruberti, Commissioner for Research, Development, Education and Training, and Professor Christopher Llewellyn Smith, Director-General of CERN signed an administrative arrangement opening the way for tighter scientific and technological cooperation between the European Union and CERN.

A project in support of international nuclear cooperation activities

Energy Technology Data Exchange (ETDEWEB)

Lee, Jeongkong; Kim, Myungro; Choi, Pyunghoon; Kim, Kyungpyo; Jung, Sunghyon; Park, Jiyeon; Eom, Jaesik; Kim, Wangkeun; Chung, Byungsun

2011-12-15

This study contains the work undertaken to promote multilateral cooperation within the framework of international nuclear related organizations and regional cooperative agreements and the relevant forums, to enhance bilateral cooperation with foreign nuclear related research institutes as well as to promote cooperation through the exchange of foreign scientists. As for multilateral cooperation, activities for promoting cooperation within the IAEA and regional cooperative frameworks are introduced. Regarding bilateral cooperation, activities for concluding arrangements and MOUs with foreign research institutes and for participation in joint nuclear coordinating committee meetings between Korea and other countries are presented. For promoting personnel exchanges, activities for inviting and utilizing foreign scientists and mutual discussions with foreign experts, who have visited KAERI, are also described. Continuous efforts to contributing towards the international community through utilizing Korea's experience gained in the process of technical self-reliance and development of human resources are needed. Also efforts to establish the foundation of international cooperation and to make inroad into overseas nuclear markets for export of our nuclear technologies should be made. Meanwhile in the bilateral cooperation, we need to beef up cooperation with U. S. A. and Canada through the joint committee for the joint export to third countries. It is expected that this study would be utilized as a basic material for the international cooperation of nuclear energy, especially for the KAERI's international cooperation in an effective way.

US/Japan cooperation in high energy physics

Science.gov (United States)

1993-11-01

The objective of the Implementing Arrangement was to further the energy programs of both countries by establishing a framework for cooperation in the field of high energy physics, including research, accelerator and detector instrumentation research and development, the fabrication and subsequent use of new experimental devices and facilities, and related joint efforts as may be mutually agreed. Over the years, this cooperation has been very effective and has strengthened the overall collaborative efforts and the understanding between our nations and their citizens. It has demonstrated to the world our ability to work together to attack difficult problems. High Energy Physics goes across national borders; the bond is clearly intellectual and common ground is shared for the benefit of all in a most effective manner. This review covers the activities conducted under the aegis of the US/Japan Committee for Cooperation in High Energy Physics during the past five years (1988-1993). This was the second such US review of the US/Japan cooperative activities; the first was held in 1987.

Data graphing methods, articles of manufacture, and computing devices

Energy Technology Data Exchange (ETDEWEB)

Wong, Pak Chung; Mackey, Patrick S.; Cook, Kristin A.; Foote, Harlan P.; Whiting, Mark A.

2016-12-13

Data graphing methods, articles of manufacture, and computing devices are described. In one aspect, a method includes accessing a data set, displaying a graphical representation including data of the data set which is arranged according to a first of different hierarchical levels, wherein the first hierarchical level represents the data at a first of a plurality of different resolutions which respectively correspond to respective ones of the hierarchical levels, selecting a portion of the graphical representation wherein the data of the portion is arranged according to the first hierarchical level at the first resolution, modifying the graphical representation by arranging the data of the portion according to a second of the hierarchal levels at a second of the resolutions, and after the modifying, displaying the graphical representation wherein the data of the portion is arranged according to the second hierarchal level at the second resolution.

Cooperative endeavors: A case study of success

Energy Technology Data Exchange (ETDEWEB)

Baker, J. [Ford Motor Co., Dearborn, MI (United States)

1997-12-31

Partnerships and cooperative agreements abound in the environmental arena today. This paper briefly highlights the collaborative approach used by the International Cooperative for Ozone Layer Protection (ICOLP). ICOLP has helped international members and non-members to eliminate most of the ozone-depleting solvents from manufacturing processes through the exchange of technical information in a non-proprietary manner. By using alternatives, companies and governments have realized savings in the multiple millions of dollars. Advantages of participating in cooperative environmental partnerships may include: (1) improved access and exchange of information, (2) cost minimization, (3) promotion and facilitation of business opportunities, (4) improved dialogue between groups, (5) coordinated approach to complex issues, and (6) technology development and transfer opportunities.

A Project in Support of International Nuclear Cooperation

International Nuclear Information System (INIS)

Kim, Myung Ro; Kim, Kyoung Pyo; Lee, Jeong Kong; Jung, Sung Hyon; Shim, Jae Sun

2009-01-01

The objective of this study is to establish the strategies of international cooperation in order to promote our nation's leading role in international community, to lay the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing in the international nuclear communities. This study contains the work undertaken to promote multilateral cooperation within the framework of international nuclear related organizations and regional cooperative agreements and the relevant forums, to enhance bilateral cooperation with foreign nuclear related research institutes as well as to promote cooperation through the exchange of foreign scientists. As for multilateral cooperation, activities for promoting cooperation within the IAEA and regional cooperative frameworks are introduced. Regarding bilateral cooperation, activities for concluding arrangements and MOUs with foreign research institutes and for participation in joint nuclear coordinating committee meetings between Korea and other countries are presented. For promoting personnel exchanges, activities for inviting and utilizing foreign scientists and mutual discussions with foreign experts, who have visited KAERI, are also described. Continuous efforts to contributing towards the international community through utilizing Korea's experience gained in the process of technical self-reliance and development of human resources are needed. Also efforts to establish the foundation of international cooperation and to make inroad into overseas nuclear markets for export of our nuclear technologies should be made. Meanwhile in the bilateral cooperation, we need to beef up cooperation with U.S.A. and Canada through the joint committee for the joint export to third countries. It is expected that this study would be utilized as a basic material for the international cooperation of nuclear energy, especially for the KAERI's international cooperation in an effective way

To Enable and Sustain: Pacific Air Forces’ Theater Security Cooperation as a Line of Operation

Science.gov (United States)

2015-02-01

security cooperation mechanisms already in place are evolving into a more sequenced and deliberate plan towards a defined cooperative end state. This...alignment of higher guidance and is designed to advise and guide the command’s activities in the region. Joint in its es- sence , it communicates and...face of crises, it is far better to prevent them from occurring in the first place , establish cooperative arrangements ahead of time, and reduce

Coordination of Cooperative Advertising in a Two-Period Fashion and Textiles Supply Chain

Directory of Open Access Journals (Sweden)

Yi He

2014-01-01

Full Text Available Previous studies related to cooperative advertising mainly focus on the one-period supply chain. In the fashion and textiles (FT supply chain, the demand of most FT products (fashion clothing, vogue handbags, fashion shoes, and so on varies over time due to the trends of fashion. In these conditions, a decision-making framework with a multiple-period supply chain becomes more realistic. In view of this, we investigate the optimal cooperative advertising strategies in a two-period FT supply chain consisting of a manufacturer and a retailer in two different scenarios: (i each channel member makes decisions within a cooperative program; (ii the retailer is vertically integrated with a manufacturer. Also, we introduce a two-way subsidy contract to coordinate the supply chain.

Organized network for supporting the amateur-scientist co-operation in Finland

Science.gov (United States)

Mäkelä, V.; Haukka, H.; Oksanen, A.; Hentunen, V.-P.

2014-04-01

PROAM network is a working group of Ursa Astronomical Association [1] for supporting Finnish amateur astronomers participating to co-operation projects between professional and amateur astronomers. The network relays the information on projects, maintains professional contacts and arranges training on technical skills for research work.

76 FR 28502 - Cooper Tire & Rubber Tire Company, Receipt of Petition for Decision of Inconsequential Noncompliance

Science.gov (United States)

2011-05-17

...-0054; Notice 1] Cooper Tire & Rubber Tire Company, Receipt of Petition for Decision of Inconsequential Noncompliance Cooper Tire & Rubber Tire Company, (Cooper),\\1\\ has determined that approximately 6,964 passenger car replacement tires manufactured between January 23, 2011 and March 26, 2011, do not fully comply...

A Project in Support of International Nuclear Cooperation

Energy Technology Data Exchange (ETDEWEB)

Kim, Myung Ro; Kim, Kyoung Pyo; Lee, Jeong Kong; Jung, Sung Hyon; Shim, Jae Sun

2008-12-15

The objective of this study is to establish the strategies of international cooperation in order to promote our nation's leading role in international community, to lay the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing in the international nuclear communities. This study contains the work undertaken to promote multilateral cooperation within the framework of international nuclear related organizations and regional cooperative agreements and the relevant forums, to enhance bilateral cooperation with foreign nuclear related research institutes as well as to promote cooperation through the exchange of foreign scientists. As for multilateral cooperation, activities for promoting cooperation within the IAEA and regional cooperative frameworks are introduced. Regarding bilateral cooperation, activities for concluding arrangements and MOUs with foreign research institutes and for participation in joint nuclear coordinating committee meetings between Korea and other countries are presented. For promoting personnel exchanges, activities for inviting and utilizing foreign scientists and mutual discussions with foreign experts, who have visited KAERI, are also described. Continuous efforts to contributing towards the international community through utilizing Korea's experience gained in the process of technical self-reliance and development of human resources are needed. Also efforts to establish the foundation of international cooperation and to make inroad into overseas nuclear markets for export of our nuclear technologies should be made. Meanwhile in the bilateral cooperation, we need to beef up cooperation with U.S.A. and Canada through the joint committee for the joint export to third countries. It is expected that this study would be utilized as a basic material for the international cooperation of nuclear energy, especially for the KAERI's international cooperation in an

A Project in Support of International Nuclear Cooperation

Energy Technology Data Exchange (ETDEWEB)

Kim, Myung Ro; Kim, Kyoung Pyo; Lee, Jeong Kong; Jung, Sung Hyon; Shim, Jae Sun

2009-01-15

The objective of this study is to establish the strategies of international cooperation in order to promote our nation's leading role in international community, to lay the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing in the international nuclear communities. This study contains the work undertaken to promote multilateral cooperation within the framework of international nuclear related organizations and regional cooperative agreements and the relevant forums, to enhance bilateral cooperation with foreign nuclear related research institutes as well as to promote cooperation through the exchange of foreign scientists. As for multilateral cooperation, activities for promoting cooperation within the IAEA and regional cooperative frameworks are introduced. Regarding bilateral cooperation, activities for concluding arrangements and MOUs with foreign research institutes and for participation in joint nuclear coordinating committee meetings between Korea and other countries are presented. For promoting personnel exchanges, activities for inviting and utilizing foreign scientists and mutual discussions with foreign experts, who have visited KAERI, are also described. Continuous efforts to contributing towards the international community through utilizing Korea's experience gained in the process of technical self-reliance and development of human resources are needed. Also efforts to establish the foundation of international cooperation and to make inroad into overseas nuclear markets for export of our nuclear technologies should be made. Meanwhile in the bilateral cooperation, we need to beef up cooperation with U.S.A. and Canada through the joint committee for the joint export to third countries. It is expected that this study would be utilized as a basic material for the international cooperation of nuclear energy, especially for the KAERI's international cooperation in an

Building the Layers of a New Manufacturing Taxonomy

DEFF Research Database (Denmark)

Kapetaniou, Chrystalla; Rieple, Alison; Pilkington, Alan

2017-01-01

Recent innovations in 3D printing technologies and processes have influenced how products are designed, built and delivered. However, there is a significant gap in our knowledge of how 3D printing is impacting on manufacturing eco-systems within different industries and contexts. Drawing...... inspiration from earlier manufacturing taxonomies as well as the competitive dynamics literature which provides insights into industries' moves from straightforwardly rivalrous frameworks, through competitive-cooperative exemplars, into the more recent relational-based competition. Basing our analysis...

Grinding arrangement for ball nose milling cutters

Science.gov (United States)

Burch, C. F. (Inventor)

1974-01-01

A grinding arrangement for spiral fluted ball nose end mills and like tools includes a tool holder for positioning the tool relative to a grinding wheel. The tool is mounted in a spindle within the tool holder for rotation about its centerline and the tool holder is pivotably mounted for angular movement about an axis which intersects that centerline. A follower arm of a cam follower secured to the spindle cooperates with a specially shaped cam to provide rotation of the tool during the angular movement of the tool holder during the grinding cycle, by an amount determined by the cam profile. In this way the surface of the cutting edge in contact with the grinding wheel is maintained at the same height on the grinding wheel throughout the angular movement of the tool holder during the grinding cycle.

Differential and Cooperative Cell Adhesion Regulates Cellular Pattern in Sensory Epithelia.

Science.gov (United States)

Togashi, Hideru

2016-01-01

Animal tissues are composed of multiple cell types arranged in complex and elaborate patterns. In sensory epithelia, including the auditory epithelium and olfactory epithelium, different types of cells are arranged in unique mosaic patterns. These mosaic patterns are evolutionarily conserved, and are thought to be important for hearing and olfaction. Recent progress has provided accumulating evidence that the cellular pattern formation in epithelia involves cell rearrangements, movements, and shape changes. These morphogenetic processes are largely mediated by intercellular adhesion systems. Differential adhesion and cortical tension have been proposed to promote cell rearrangements. Many different types of cells in tissues express various types of cell adhesion molecules. Although cooperative mechanisms between multiple adhesive systems are likely to contribute to the production of complex cell patterns, our current understanding of the cooperative roles between multiple adhesion systems is insufficient to entirely explain the complex mechanisms underlying cellular patterning. Recent studies have revealed that nectins, in cooperation with cadherins, are crucial for the mosaic cellular patterning in sensory organs. The nectin and cadherin systems are interacted with one another, and these interactions provide cells with differential adhesive affinities for complex cellular pattern formations in sensory epithelia, which cannot be achieved by a single mechanism.

Activity meters: Calibration and quality assurance measures by the manufacturer

International Nuclear Information System (INIS)

Pychlau, P.

1992-01-01

A manufacturer of ionisation chambers gives a general idea of such quality assurance programs as may be implemented after an agreement has been reached at the EC level on a guideline for activity meters. Further issues discussed include the final controls, calibration of activity meters by the manufacturer and the advantages that the participation in cooperate tests would offer over a mandatory calibration of activity meters. (orig./DG) [de

Why manufacturing resurgence will mean more services, not less

OpenAIRE

Serafica, Ramonette B.

2016-01-01

Services are critical inputs in manufacturing production, and this is likely to intensify with the advent of new technologies. Based on the trade in value-added data of the Organisation for Economic Co-operation and Development, the share of services embodied in Philippine manufacturing exports is among the lowest in the region. Moreover, value added from "ICT services" and "Other business services" seem inadequate compared to patterns observed in other countries, while the share of "Wholesal...

Research on Contractual Model Selection of Farmers’ Cooperatives——A Case Study of Production and Marketing Cooperative of Sweet Pomegranate in Mengzi,Yunnan

Institute of Scientific and Technical Information of China (English)

2011-01-01

In the perspective of new institutional economics,we regard farmers’ cooperatives as a "contractual set" integrating a series of long-term contractual relations,and transform the selection problem of organization forms into selection problem of contractual model within organization.By the theoretical framework of Transaction Cost Economics,we analyze the formation mechanism and determinant factors of contractual model of different farmers’ cooperatives and conduct case study on Production and Marketing Cooperative of Sweet Pomegranate in Mengzi,Yunnan.The results show that selecting contractual forms of cooperatives is the result of weighing many factors;new organization model or contractual arrangement is complementary to the former system arrangement;the selection of cooperatives model is an important factor impacting cooperation efficiency and stability of organization.One organization model with efficiency not only hinges on the transaction characteristic of organization,but also considers the compatibility with exterior transaction environment.In the process of selecting contractual model,we should conform to objective evolving law,but not be in thrall to a certain given form.

LOAD EQUILIBRATION OF WORKING PLACES ARRANGED ON CONVEYORS USED FOR FOOTWEAR UPPERS MANUFACTURING

Directory of Open Access Journals (Sweden)

HARNAGEA Florentina

2016-05-01

Full Text Available In the present paper there is presented how to achieve a load equilibration of workstations for a conveyor with imposed pace, in the case of manufacturing uppers for a women boots model. Equilibration of work charging is done by switching worker’s operations in order to use at full time each worker placed in the technological flow process. In the manufacruring process of shoe uppers of the considered model, there have been established the operative time and production rates per operation. Thus there has been calculated the work necessary amount Nci for accomplishing different production rates: Q=600,650, 700, 750... 900pairs/ 8 h and the necessary amount of work Nai was adopted. A technology line of manufacturing a footwear item is used at its optimum capacity when the number of work vacancy is minimum, 0.013 corresponding to a flow production of 700pairs / 8h the highest labor productivity being obtained, ie 17.5 pairs / worker • 8h. By equilibrating the work charge for each operation, it is obtained, for a daily production of 700pairs / 8h, a reduction of the number of workspaces from 40 to 36 workers and hence a labor productivity of 19.44 pairs / worker • 8h.

[Potential of cooperative learning in project development : Relevance of cooperative participation procedure for the further development of generation-appropriate accomodation in structurally weak rural areas].

Science.gov (United States)

Kaufmann, Gerd; Frankenberg, Olga; Sommer, Ralf-Rüdiger; Jost, Annemarie

2017-04-01

A joint initiative of existing senior care organizations, the municipality of Meyenburg and the state of Brandenburg was further developed by affiliation of an institute of the Brandenburg University of Technology Cottbus-Senftenberg (ABV) in cooperation with members of the architecture and social work departments in 2014. A cooperative process between different players was central to create an appropriate structure of services for this region. Cooperative projects are necessary to establish new forms of generation-appropriate living and care concepts in rural areas. Cooperative learning methods are needed to develop new forms of generation-appropriate living and care concepts in rural areas, which take the diversity of elderly people, the rural context, intergenerational residential arrangements and affordable accommodation that meets the requirements of the social security system into account. Furthermore, the project had to reflect the recent developments of the German care insurance. The article describes the participatory methods, the coordination process and the resulting concept.

Test manufacture of the canister insert 135

International Nuclear Information System (INIS)

Raiko, H.

2005-10-01

This report describes the insert-manufacturing test of a disposal canister for spent nuclear fuel that was made by Metso Foundries Jyvaeskylae Oy, in June 2004 on contract for Posiva Oy. The test manufacture was a part of the co-operation development programme of encapsulation technology between SKB AB and Posiva Oy. Insert casting was specified according to the current manufacturing specifications of SKB. The canister insert was of BWR-type with integral bottom. This was the second trial manufacture of this type of insert in Finland and, in total, the third test manufacture of insert by Metso Foundries Jyvaeskylae Oy. The result fulfilled all the requirements but the material mechanical properties of the cast material. The measured ultimate strength and elongation at rupture were lower than specified in the upper part of the cast. The reason for this was revealed in the metallurgical investigation of the cast material. The cast contained slag (dross). Avoiding the dross formation will be the most demanding challenge of the forthcoming development of the cast procedure. (orig.)

Design and Manufacture of a Novel LED Table Lamp with Flower Decoration

OpenAIRE

Tzer-Ming Jeng; Sheng-Chung Tzeng; Wei-Ting Hsu; Chia-Hung Chang; Yu-Xiang Huang

2014-01-01

This work involved the design and manufacture of a novel LED table lamp that provides for flower decoration. It is a combination of a normal LED table lamp and attachments holding flower arrangement frogs. In this application the frogs, as used for traditional flower arrangements, became heat sinks for the LED units. They are made of an aluminum alloy to give good heat transfer and dissipation. In any case since they are fixed to the unit they do not need to be very heavy. The design features...

A New Step for ''State-IAEA Cooperation'' Based on the Enhanced Cooperation Program

International Nuclear Information System (INIS)

Jo, S.Y.; Kim, M.; Kim, S.

2015-01-01

Since joining the IAEA comprehensive safeguards agreements, the ROK has made some exemplary case of implementing the IAEA's safeguards policy in a State. It's the results of the ROK Government's persistent effort for nuclear transparency to maintain its peaceful nuclear activities which is indispensible in Korea. The history of the ROK SSAC development can be reflected on the trajectory of the evolution of the IAEA safeguards. The ROK SSAC has achieved technical capabilities required for IAEA safeguards, which was not possible without cooperation programme with the IAEA. The first memorable moment of the ROK-IAEA cooperation is the enhanced cooperation program for the ROK LWRs in 2001, introducing remote monitoring systems and some changes in interim inspections. The next chance for leveling the ROK SSAC up came with IS implementation. Two parties consulted what should be prepared for efficient implementation of IS through seven times working group meetings. The WG put out IS approaches which have been being applied for the ROK nuclear facilities since 2008. The IS implementation, which is based on the state level approach, allowed the ROK SSAC to get opportunities to improve more its technical capabilities about support for IAEA safeguards activities, developing verification devices and safeguards approaches for pyroprocessing related facilities. The IAEA and the ROK are putting strenuous efforts for strengthening safeguards cooperation based on the Enhanced Cooperation Arrangements which was signed in 2012, discussing the SSAC role in IAEA safeguards activities, joint use equipment, etc. Besides, two parties are considering introducing unannounced inspections at LWRs after several rehearsals. In this paper, the implication and importance of State-IAEA cooperation is presented based on the ROK's experience with summarizing the brief history of SSAC development and cooperation with the IAEA. (author)

Higher Education Cooperation in ASEAN: Building towards Integration or Manufacturing Consent?

Science.gov (United States)

Feuer, Hart N.; Hornidge, Anna-Katharina

2015-01-01

The triad of cooperation, international exchange, and integration among institutions of higher education has become the new norm in the global experience of learning and academic training. The goal of improving and standardising the academic experience across countries is now typically also associated with fostering cultural and political ties and…

VIABILITY OF SOME APPLIED COST SYSTEMS IN MANUFACTURING FIRMS: EGYPT'S CASE

Directory of Open Access Journals (Sweden)

Karim Mamdouh ABBAS

2015-04-01

Full Text Available The present study aims to analyze viability of some applied cost systems. The population of the study is some Egyptian manufacturing firms. The number of received questionnaires was 385. The results indicated that , according to the application extent indicator, the currently cost systems in Egyptian manufacturing firms may be descendingly arranged as follows: Activity Based Costing (ABC system, Target Costing (TC system , Resource Consumption Accounting (RCA system, Activity Based Management (ABM ,Other systems, Theory of Constraints (TOC and Value Chain (VC analysis.

A Road Map for Success: How Northwest Manufactured Housing Conservation Efforts Revolutionized an Industry.

Energy Technology Data Exchange (ETDEWEB)

Gilbertson, William L.

1993-04-01

The evolution of an ongoing Bonneville Power Administration effort to improve the energy efficiency of manufactured homes is chronicled in this informal history. Over the past nine years, Bonneville`s manufactured housing project has undertaken many activities, including technical studies, cooperative ventures, design studies, and information dissemination. These activities are covered.

26 CFR 1.482-7A - Methods to determine taxable income in connection with a cost sharing arrangement.

Science.gov (United States)

2010-04-01

... into a cost sharing agreement to develop manufacturing intangibles for a new product line A. USP and FS... (FS) enter into a cost sharing arrangement to develop new food products, dividing costs on the basis.... See generally § 1.864-2(a). (2) Limitation on allocations. The district director shall not make...

75 FR 36695 - Solicitation for a Cooperative Agreement: Meetings of the Institutional Corrections Research...

Science.gov (United States)

2010-06-28

... under this cooperative agreement will organize and coordinate all logistical details for all four... in arranging travel and lodging and in reimbursing costs in conformity with Federal guidelines. With...), an outline explaining projected costs, and the following forms: OMB Standard Form 424, Application...

Incentive mechanism based on cooperative advertising for cost information sharing in a supply chain with competing retailers

Science.gov (United States)

Setak, Mostafa; Kafshian Ahar, Hajar; Alaei, Saeed

2017-09-01

This paper proposes a new motivation for information sharing in a decentralized channel consisting of a single manufacturer and two competing retailers. The manufacturer provides a common product to the retailers at the same wholesale price. Both retailers add their own values to the product and distribute it to consumers. Factors such as retail prices, values added to the product, and local advertising of the retailers simultaneously have effect on market demand. Each retailer has full information about the own added value which is unknown to the manufacturer and other retailer. The manufacturer uses a cooperative advertising program for motivating the retailers to disclose their private information. A numerical study is presented to compare different scenarios of information sharing. Computational results show that there is a condition in which full information sharing is beneficial for all members of the supply chain through cooperative advertising program and, therefore, retailers have enough incentive to disclose their cost information to the manufacturer.

Contractual arrangements for uranium exploration and mining

International Nuclear Information System (INIS)

1988-07-01

Uranium exploration in WOCA, stabilized since 1985 at a level of annual expenditures of US $120-150 million. About half of this amount is funded by mining companies based in the uranium consumer countries such as the Federal Republic of Germany, France, the Republic of Korea, Japan, United Kingdom etc. and expended outside their home countries, mainly in Australia, Canada and USA, but also in a number of African countries. As WOCA's uranium production is concentrated in a few countries, in 1986, Australia, Canada, South Africa and USA had a combined share of nearly 70% of the total, a stronger diversification of uranium supplies may be desirable in the future. This expected trend may result in the planning or uranium exploration projects by international uranium companies in countries in Africa, Asia and South America. To provide information which can be helpful for both parties in the negotiations of cooperation agreement is the scope of this document. It contains a brief introductory part including an overview of the development of the different forms of international cooperation, a case history provided by Zambia, a report listing the essential subjects to be included in an uranium agreement as well as an example of a structure of contractual arrangements. This part is followed by an extensive annex with three ''no-names-no numbers'' contract texts, which were concluded in the later part of the 1970s and beginning of the 1980s

Ubiquitous Robotic Technology for Smart Manufacturing System.

Science.gov (United States)

Wang, Wenshan; Zhu, Xiaoxiao; Wang, Liyu; Qiu, Qiang; Cao, Qixin

2016-01-01

As the manufacturing tasks become more individualized and more flexible, the machines in smart factory are required to do variable tasks collaboratively without reprogramming. This paper for the first time discusses the similarity between smart manufacturing systems and the ubiquitous robotic systems and makes an effort on deploying ubiquitous robotic technology to the smart factory. Specifically, a component based framework is proposed in order to enable the communication and cooperation of the heterogeneous robotic devices. Further, compared to the service robotic domain, the smart manufacturing systems are often in larger size. So a hierarchical planning method was implemented to improve the planning efficiency. A test bed of smart factory is developed. It demonstrates that the proposed framework is suitable for industrial domain, and the hierarchical planning method is able to solve large problems intractable with flat methods.

Pricing, Carbon Emission Reduction, Low-Carbon Promotion and Returning Decision in a Closed-Loop Supply Chain under Vertical and Horizontal Cooperation.

Science.gov (United States)

Li, Hui; Wang, Chuanxu; Shang, Meng; Ou, Wei

2017-11-01

In this paper, we examine the influences of vertical and horizontal cooperation models on the optimal decisions and performance of a low-carbon closed-loop supply chain (CLSC) with a manufacturer and two retailers, and study optimal operation in the competitive pricing, competitive the low-carbon promotion, the carbon emission reduction, the used-products collection and the profits. We consider the completely decentralized model, M-R vertical cooperation model, R-R horizontal cooperation model, M-R-R vertical and horizontal cooperation model and completely centralized model, and also identify the optimal decision results and profits. It can be observed from a systematic comparison and numerical analysis that the completely centralized model is best in all optimal decision results among all models. In semi-cooperation, the M-R vertical cooperation model is positive, the R-R horizontal cooperation model is passive, and the positivity of the M-R-R vertical and horizontal cooperation model decreases with competitive intensity increasing in the used-products returning, carbon emissions reduction level, low-carbon promotion effort and the profits of the manufacturer and the entire supply chain.

Build platform that provides mechanical engagement with additive manufacturing prints

Science.gov (United States)

Elliott, Amelia M.

2018-03-06

A build platform and methods of fabricating an article with such a platform in an extrusion-type additive manufacturing machine are provided. A platform body 202 includes features 204 that extend outward from the body 202. The features 204 define protrusive areas 206 and recessive areas 208 that cooperate to mechanically engage the extruded material that forms the initial layers 220 of an article when the article is being fabricated by a nozzle 12 of the additive manufacturing machine 10.

General principles for future JAEA-NNCA cooperation in remote monitoring

International Nuclear Information System (INIS)

Olsen, John

2006-01-01

Precedents from existing bilateral documents might be useful in envisioning structure of a future NNCA/JAEA arrangement. This discussion included a listing of potential cooperative topics that NNCA and NPSTC had noted in previous informal meetings at O'arai and Daejeon over the preceding 18 months. A broad range of activities might be considered that reflect similar responsibilities in the JAEA's NPSTC and in the NNCA. (author)

A theory of leadership in human cooperative groups.

Science.gov (United States)

Hooper, Paul L; Kaplan, Hillard S; Boone, James L

2010-08-21

Two types of models aim to account the origins of rank differentiation and social hierarchy in human societies. Conflict models suggest that the formation of social hierarchies is synonymous with the establishment of relationships of coercive social dominance and exploitation. Voluntary or 'integrative' models, on the other hand, suggest that rank differentiation--the differentiation of leader from follower, ruler from ruled, or state from subject--may sometimes be preferred over more egalitarian social arrangements as a solution to the challenges of life in social groups, such as conflict over resources, coordination failures, and free-riding in cooperative relationships. Little formal theoretical work, however, has established whether and under what conditions individuals would indeed prefer the establishment of more hierarchical relationships over more egalitarian alternatives. This paper provides an evolutionary game theoretical model for the acceptance of leadership in cooperative groups. We propose that the effort of a leader can reduce the likelihood that cooperation fails due to free-riding or coordination errors, and that under some circumstances, individuals would prefer to cooperate in a group under the supervision of a leader who receives a share of the group's productivity than to work in an unsupervised group. We suggest, in particular, that this becomes an optimal solution for individual decision makers when the number of group members required for collective action exceeds the maximum group size at which leaderless cooperation is viable.

Cooperation and contagion in web-based, networked public goods experiments.

Directory of Open Access Journals (Sweden)

Siddharth Suri

Full Text Available A longstanding idea in the literature on human cooperation is that cooperation should be reinforced when conditional cooperators are more likely to interact. In the context of social networks, this idea implies that cooperation should fare better in highly clustered networks such as cliques than in networks with low clustering such as random networks. To test this hypothesis, we conducted a series of web-based experiments, in which 24 individuals played a local public goods game arranged on one of five network topologies that varied between disconnected cliques and a random regular graph. In contrast with previous theoretical work, we found that network topology had no significant effect on average contributions. This result implies either that individuals are not conditional cooperators, or else that cooperation does not benefit from positive reinforcement between connected neighbors. We then tested both of these possibilities in two subsequent series of experiments in which artificial seed players were introduced, making either full or zero contributions. First, we found that although players did generally behave like conditional cooperators, they were as likely to decrease their contributions in response to low contributing neighbors as they were to increase their contributions in response to high contributing neighbors. Second, we found that positive effects of cooperation were contagious only to direct neighbors in the network. In total we report on 113 human subjects experiments, highlighting the speed, flexibility, and cost-effectiveness of web-based experiments over those conducted in physical labs.

The Use of Cooperative Learning Through Tai (Team Assisted Individualization In Reading Comprehension

Directory of Open Access Journals (Sweden)

Ermawati Zulikhatin Nuroh

2018-04-01

Full Text Available Cooperative Learning is a teaching arrangement that refers to small, heterogeneous groups of students working together to achieve a common goal (Kagan, 1994. This research is done to know the response of students used cooperative learning in reading comprehension. The data of this study analyzed qualitatively without applying statistical calculations. The subject of the study were the students of the first semester in Midwifery faculty of Universitas Muhammadiyah Sidoarjo . There researcher used one class which consist 29 students. The students gave the positive responses and dominantly agreed to the implementation of cooperative learning type Team Assisted Individualization (TAI in reading comprehension. From the questionnaire, the researcher concludes that are 40% students are agreed, 50% students strongly agree, and 10% less agree  with cooperative learning type Team Assisted Individualization (TAI in reading comprehension. The conclusion is students respond well to cooperative learning model type Team Assisted Individualization (TAI to improve students' reading comprehension. This cooperative learning type Team Assisted Individualization (TAI can be the one of the model to teach reading comprehension.

On arrangements of pseudohyperplanes

Indian Academy of Sciences (India)

To every realizable oriented matroid there corresponds an arrangement of ... An important object missing in the context of pseudo-arrangements is an analogue ...... to extend this correspondence we use the language of metrical-hemisphere ...

Voluntary Environmental Governance Arrangements

NARCIS (Netherlands)

van der Heijden, J.

2012-01-01

Voluntary environmental governance arrangements have focal attention in studies on environmental policy, regulation and governance. The four major debates in the contemporary literature on voluntary environmental governance arrangements are studied. The literature falls short of sufficiently

Creating a Pan-Asian model for international cooperation in nuclear power

International Nuclear Information System (INIS)

Gerstenhaber, E.P.

1994-01-01

The author stressed that as southeast Asian countries expand their participation in nuclear technology, a time has come for new forms of cooperation between nations. Cooperation will accelerate the entry of nations into the nuclear era, especially where a well developed industrial and technical base may not yet be available. By sharing the challenges of the technology and working together, nations may more quickly and economically afford the benefits of nuclear energy. Activities range from basic engineering to manufacturing and assembly of advanced modularized plants. Focus on nuclear requirements will help to build an indigenous industrial and technical base. Several models for international cooperation are presented

Optical Arrangement and Method

DEFF Research Database (Denmark)

2010-01-01

Processing of electromagnetic radiation is described, said incoming electromagnetic radiation comprising radiation in a first wavelength interval and a plurality of spatial frequencies. An arrangement comprises a focusing arrangement for focusing the incoming electromagnetic radiation, a first ca...

ITER blanket module connectors. Design, analysis and testing for procurement arrangement

International Nuclear Information System (INIS)

Khomiakov, S.; Poddubnyi, I.; Kolganov, V.; Zhmakin, A.; Parshutin, E.; Danilov, I.; Strebkov, Yu.; Skladnov, K.; Vlasov, D.; Cheburova, A.; Romannikov, A.; Raffray, R.; Egorov, K.; Chappuis, Ph.; Sadakov, S.; Calcagno, B.; Roccella, R.

2016-01-01

Highlights: • Procurement Arrangement on Blanket Module Connections (BMC) was signed by ITER Organization and Russian Federation Domestic Agency in late 2014. • “N.A. Dollezhal Research and Development Institute of Power Engineering” (NIKIET) was selected as a general supplier of BMC. • NIKIET plays a key role in design development, analytical and experimental justification and manufacturing of BMC. • NIKIET shall fabricate, test and deliver to ITER 2109 flexible supports, 2561 pads, 1053 electrical straps and 1053 pedestals. - Abstract: A standard ITER Blanket module (BM) is attached to the Vacuum Vessel (VV) with a special system of Blanket Module Connections (BMCs) comprising flexible supports, insulating key pads and electrical straps. BMCs fix the modules relative to the VV and manage the current flow. They accommodate transient, cyclic, thermal and electro-magnetic (EM) loads in a vacuum environment and under neutron radiation. Dynamic, thermal-structural and strength analyses have been performed in support of the BMC design and the results have been experimentally confirmed. The components with uncertain behavior including partially and non-preloaded threads, insulation coating, and electrical contacts were designed by experiments. The effort to develop a reliable and robust design of the BMCs in time for the signature of the Procurement Arrangement on BMCs between ITER Organization and Russian Federation in late 2014 spanned several years. It includes design and analysis as well as experimental activities by the ITER Organization and by JSC “NIKIET” (Russia), which, as an affirmed subcontractor will manufacture and supply BMCs to the ITER site. This paper summarizes the overall effort focusing in particular on the more recent PA supporting activities.

ITER blanket module connectors. Design, analysis and testing for procurement arrangement

Energy Technology Data Exchange (ETDEWEB)

Khomiakov, S., E-mail: khomias58@mail.ru [Joint-Stock Company “N.A. Dollezhal Research and Development Institute of Power Engineering”, 107140, Malaya Krasnoselskaya Str. 2/8, Moscow (Russian Federation); Poddubnyi, I.; Kolganov, V.; Zhmakin, A.; Parshutin, E.; Danilov, I.; Strebkov, Yu.; Skladnov, K.; Vlasov, D.; Cheburova, A. [Joint-Stock Company “N.A. Dollezhal Research and Development Institute of Power Engineering”, 107140, Malaya Krasnoselskaya Str. 2/8, Moscow (Russian Federation); Romannikov, A. [Institution “Project Center ITER”, 123098, Academic Kurchatov' s Sq.,1, Moscow (Russian Federation); Raffray, R.; Egorov, K.; Chappuis, Ph.; Sadakov, S.; Calcagno, B.; Roccella, R. [ITER Organization, Route de Vinon sur Verdon, 13067 St. Paul-Lez-Durance (France)

2016-11-01

Highlights: • Procurement Arrangement on Blanket Module Connections (BMC) was signed by ITER Organization and Russian Federation Domestic Agency in late 2014. • “N.A. Dollezhal Research and Development Institute of Power Engineering” (NIKIET) was selected as a general supplier of BMC. • NIKIET plays a key role in design development, analytical and experimental justification and manufacturing of BMC. • NIKIET shall fabricate, test and deliver to ITER 2109 flexible supports, 2561 pads, 1053 electrical straps and 1053 pedestals. - Abstract: A standard ITER Blanket module (BM) is attached to the Vacuum Vessel (VV) with a special system of Blanket Module Connections (BMCs) comprising flexible supports, insulating key pads and electrical straps. BMCs fix the modules relative to the VV and manage the current flow. They accommodate transient, cyclic, thermal and electro-magnetic (EM) loads in a vacuum environment and under neutron radiation. Dynamic, thermal-structural and strength analyses have been performed in support of the BMC design and the results have been experimentally confirmed. The components with uncertain behavior including partially and non-preloaded threads, insulation coating, and electrical contacts were designed by experiments. The effort to develop a reliable and robust design of the BMCs in time for the signature of the Procurement Arrangement on BMCs between ITER Organization and Russian Federation in late 2014 spanned several years. It includes design and analysis as well as experimental activities by the ITER Organization and by JSC “NIKIET” (Russia), which, as an affirmed subcontractor will manufacture and supply BMCs to the ITER site. This paper summarizes the overall effort focusing in particular on the more recent PA supporting activities.

Seating Arrangement, Group Composition and Competition-driven Interaction: Effects on Students' Performance in Physics

International Nuclear Information System (INIS)

Roxas, R. M.; Monterola, C.; Carreon-Monterola, S. L.

2010-01-01

We probe the effect of seating arrangement, group composition and group-based competition on students' performance in Physics using a teaching technique adopted from Mazur's peer instruction method. Ninety eight lectures, involving 2339 students, were conducted across nine learning institutions from February 2006 to June 2009. All the lectures were interspersed with student interaction opportunities (SIO), in which students work in groups to discuss and answer concept tests. Two individual assessments were administered before and after the SIO. The ratio of the post-assessment score to the pre-assessment score and the Hake factor were calculated to establish the improvement in student performance. Using actual assessment results and neural network (NN) modeling, an optimal seating arrangement for a class was determined based on student seating location. The NN model also provided a quantifiable method for sectioning students. Lastly, the study revealed that competition-driven interactions increase within-group cooperation and lead to higher improvement on the students' performance.

Cooperative heat transfer and ground coupled storage system

Science.gov (United States)

Metz, P.D.

A cooperative heat transfer and ground coupled storage system wherein collected solar heat energy is ground stored and permitted to radiate into the adjacent ground for storage therein over an extended period of time when such heat energy is seasonally maximally available. Thereafter, when said heat energy is seasonally minimally available and has propagated through the adjacent ground a substantial distance, the stored heat energy may be retrieved by a circumferentially arranged heat transfer means having a high rate of heat transfer.

Prospects and challenges for new security arrangements in the Asia-Pacific region

International Nuclear Information System (INIS)

Hong, Mark

1992-01-01

The topics covered in this presentation are as follows: prospects and challenges for arms limitations; cooperation for new regional security arrangements; role of the United nations in conflict prevention, peace-keeping and disarmament. Developments in former Soviet Union which create concern are: the possible dispersion of Russian nuclear expertise and personnel to would be nuclear powers; the continuing friction between Russia and Ukraine over disposal of ex-Soviet ICBMs and tactical nuclear weapons, and the transfer to Russia of 3000 nuclear warheads in Ukraine; the Black Sea fleet, and the Crimea question. These dramatic events have global as well as regional impact as Russia is an Asia-Pacific Country

Manufacturing technology supported by advanced and integrated information system through international cooperation in fiscal 1995; Kan`i sosagata denshi sekkei seisan shien system no kaihatsu ni kansuru kenkyu kyoryoku

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Informatization using mainly computers is more and more important contributing to the upgrading in society, economy and a variety of fields. As to informatization in developing countries, however, there has still been few to be seen. Accordingly, gaps are getting larger between developing countries and developed countries where informatization is acceleratedly advanced. In the light of such actual state, Center of the International Cooperation for Computerization (CICC) contracted with NEDO and promoted a project `Manufacturing technology supported by advanced and integrated information system through international cooperation.` This is a project to study jointly with five Asian countries with which NEDO made a basic contract, China, Indonesia, Malaysia, Singapore and Thailand. Working group is set up for each theme such as automobiles/parts, electric home appliances/parts, and fiber/apparel, to study the construction of a model house and the design of a system. In fiscal 1994, the field survey was conducted, and in fiscal 1995 the system design was started. 16 figs., 1 tab.

Development and Analysis of Double-Faced Radial and Cluster-Arranged CMP Diamond Disk

Directory of Open Access Journals (Sweden)

M. Y. Tsai

2014-01-01

Full Text Available In semiconductor manufacturing, diamond disks are indispensable for dressing chemical mechanical polishing (CMP pads. Recently, 450 mm (18 inch diameter wafers have been used to improve output and reduce wafer production cost. To polish 450 mm diameter wafers, the diameter of polishing pads must be increased to 1050 mm. In particular, because diamond disks are limited to 100 mm diameters, a much greater number of working crystals will be required for dressing a 1050 mm diameter pad. Consequently, new diamond disks must be developed. In this study, novel arrangements are made using a braze in diamond patterns, which are radial with a cluster arrangement of 3-4 grits per cluster. Furthermore, a double-faced combined diamond disk is developed. The polishing pad surface was characterized, and the effect of different diamond conditioners on wafer removal rate was studied. This research aims to develop a more suitable diamond disk for dressing 1050 mm diameter polishing pads.

Modeling of Agile Intelligent Manufacturing-oriented Production Scheduling System

Institute of Scientific and Technical Information of China (English)

Zhong-Qi Sheng; Chang-Ping Tang; Ci-Xing Lv

2010-01-01

Agile intelligent manufacturing is one of the new manufacturing paradigms that adapt to the fierce globalizing market competition and meet the survival needs of the enterprises, in which the management and control of the production system have surpassed the scope of individual enterprise and embodied some new features including complexity, dynamicity, distributivity, and compatibility. The agile intelligent manufacturing paradigm calls for a production scheduling system that can support the cooperation among various production sectors, the distribution of various resources to achieve rational organization, scheduling and management of production activities. This paper uses multi-agents technology to build an agile intelligent manufacturing-oriented production scheduling system. Using the hybrid modeling method, the resources and functions of production system are encapsulated, and the agent-based production system model is established. A production scheduling-oriented multi-agents architecture is constructed and a multi-agents reference model is given in this paper.

Users guide for WoodCite, a product cost quotation tool for wood component manufacturers [computer program

Science.gov (United States)

Jeff Palmer; Adrienn Andersch; Jan Wiedenbeck; Urs. Buehlmann

2014-01-01

WoodCite is a Microsoft® Access-based application that allows wood component manufacturers to develop product price quotations for their current and potential customers. The application was developed by the U.S. Forest Service and Virginia Polytechnic Institute and State University, in cooperation with the Wood Components Manufacturers Association.

APPLICATION OF ADDITIVELY MANUFACTURED POLYMER COMPOSITE PROTOTYPES IN FOUNDRY

Directory of Open Access Journals (Sweden)

Wiesław Kuczko

2015-05-01

Full Text Available The paper presents a method, developed by the authors, for manufacturing polymer composites with the matrix manufactured in a layered manner (via 3D printing – Fused Deposition Modeling out of a thermoplastic material. As an example of practical application of this method, functional prototypes are presented, which were used as elements of foundry tooling – patterns for sand molding. In case of manufacturing prototype castings or short series of products, foundries usually cooperate with modeling studios, which produce patterns by conventional, subtractive manufacturing technologies. If patterns have complex shapes, this results in high manufacturing costs and significantly longer time of tooling preparation. The method proposed by the authors allows manufacturing functional prototypes in a short time thanks to utilizing capabilities of additive manufacturing (3D printing technology. Thanks to using two types of materials simultaneously (ABS combined with chemically hardened resins, the produced prototypes are capable of carrying increased loads. Moreover, the method developed by the authors is characterized by manufacturing costs lower than in the basic technology of Fused Deposition Modeling. During the presented studies, the pattern was produced as a polymer composite and it was used to prepare a mold and a set of metal castings.

Topics in hyperplane arrangements

CERN Document Server

Aguiar, Marcelo

2017-01-01

This monograph studies the interplay between various algebraic, geometric and combinatorial aspects of real hyperplane arrangements. It provides a careful, organized and unified treatment of several recent developments in the field, and brings forth many new ideas and results. It has two parts, each divided into eight chapters, and five appendices with background material. Part I gives a detailed discussion on faces, flats, chambers, cones, gallery intervals, lunes and other geometric notions associated with arrangements. The Tits monoid plays a central role. Another important object is the category of lunes which generalizes the classical associative operad. Also discussed are the descent and lune identities, distance functions on chambers, and the combinatorics of the braid arrangement and related examples. Part II studies the structure and representation theory of the Tits algebra of an arrangement. It gives a detailed analysis of idempotents and Peirce decompositions, and connects them to the classical th...

Best Manufacturing Practices: Report of Survey Conducted at Weirton Steel Corporation, Weirton, WV

National Research Council Canada - National Science Library

Renner, Ernie

1996-01-01

This report was produced by the Best Manufacturing Practices (BMP) program, a unique industry and government cooperative technology transfer effort that improves the competitiveness of America's industrial base both here and abroad...

40 CFR 1045.635 - What special provisions apply for small-volume engine manufacturers?

Science.gov (United States)

2010-07-01

... provisions related to the transition to new emission standards. See § 1045.145. (2) More flexible arrangements for creating engine families for high-performance engines. See § 1045.230. (3) Assigned... small-volume engine manufacturer, we will work with you to determine a reasonable schedule for complying...

Process arrangement options for Defense waste immobilization

International Nuclear Information System (INIS)

1980-02-01

Current plans are to immobilize the SRP high-level liquid wastes in a high integrity form. Borosilicate glass was selected in 1977 as the reference waste form and a mjaor effort is currently underway to develop the required technology. A large new facility, referred to as the Defense Waste Processing Facility (DWPF) is being designed to carry out this mission, with project authorization targeted for 1982 and plant startup in 1989. However, a number of other process arrangements or manufacturing strategies, including staging the major elements of the project or using existing SRP facilities for some functions, have been suggested in lieu of building the reference DWPF. This study assesses these various options and compares them on a technical and cost basis with the DWPF. Eleven different manufacturing options for SRP defense waste solidification were examined in detail. These cases are: (1) vitrification of acid waste at current generation rate; (2) vitrification of current rate acid waste and caustic sludge; (3 and 4) vitrification of the sludge portion of neutralized waste; (5) decontamination of salt cake and storage of concentrated cesium and strontium for later immobilization; (6) processing waste in a facility with lower capacity than the DWPF; (7) processing waste in a combination of existing and new facilities; (8) waste immobilization in H Canyon; (9) vitrification of both sludge and salt; (10) DWPF with onsite storage; (11) deferred authorization of DWPF

Pricing, Carbon Emission Reduction, Low-Carbon Promotion and Returning Decision in a Closed-Loop Supply Chain under Vertical and Horizontal Cooperation

Science.gov (United States)

Li, Hui; Wang, Chuanxu; Shang, Meng; Ou, Wei

2017-01-01

In this paper, we examine the influences of vertical and horizontal cooperation models on the optimal decisions and performance of a low-carbon closed-loop supply chain (CLSC) with a manufacturer and two retailers, and study optimal operation in the competitive pricing, competitive the low-carbon promotion, the carbon emission reduction, the used-products collection and the profits. We consider the completely decentralized model, M-R vertical cooperation model, R-R horizontal cooperation model, M-R-R vertical and horizontal cooperation model and completely centralized model, and also identify the optimal decision results and profits. It can be observed from a systematic comparison and numerical analysis that the completely centralized model is best in all optimal decision results among all models. In semi-cooperation, the M-R vertical cooperation model is positive, the R-R horizontal cooperation model is passive, and the positivity of the M-R-R vertical and horizontal cooperation model decreases with competitive intensity increasing in the used-products returning, carbon emissions reduction level, low-carbon promotion effort and the profits of the manufacturer and the entire supply chain. PMID:29104268

Pricing, Carbon Emission Reduction, Low-Carbon Promotion and Returning Decision in a Closed-Loop Supply Chain under Vertical and Horizontal Cooperation

Directory of Open Access Journals (Sweden)

Hui Li

2017-11-01

Full Text Available In this paper, we examine the influences of vertical and horizontal cooperation models on the optimal decisions and performance of a low-carbon closed-loop supply chain (CLSC with a manufacturer and two retailers, and study optimal operation in the competitive pricing, competitive the low-carbon promotion, the carbon emission reduction, the used-products collection and the profits. We consider the completely decentralized model, M-R vertical cooperation model, R-R horizontal cooperation model, M-R-R vertical and horizontal cooperation model and completely centralized model, and also identify the optimal decision results and profits. It can be observed from a systematic comparison and numerical analysis that the completely centralized model is best in all optimal decision results among all models. In semi-cooperation, the M-R vertical cooperation model is positive, the R-R horizontal cooperation model is passive, and the positivity of the M-R-R vertical and horizontal cooperation model decreases with competitive intensity increasing in the used-products returning, carbon emissions reduction level, low-carbon promotion effort and the profits of the manufacturer and the entire supply chain.

Regional cooperation for European seas: Governance models in support of the implementation of the MSFD

NARCIS (Netherlands)

Tatenhove, van J.P.M.; Raakjaer, J.; Leeuwen, van J.; Hoof, van L.J.W.

2014-01-01

During the implementation process of the Marine Strategy Framework Directive (MSFD), Member States are expected to cooperate and coordinate at the regional sea level as wells as arrange stakeholder involvement. However, the MSFD does not specify any governing structures to do so. The aim of this

Using assistive technology adaptations to include students with learning disabilities in cooperative learning activities.

Science.gov (United States)

Bryant, D P; Bryant, B R

1998-01-01

Cooperative learning (CL) is a common instructional arrangement that is used by classroom teachers to foster academic achievement and social acceptance of students with and without learning disabilities. Cooperative learning is appealing to classroom teachers because it can provide an opportunity for more instruction and feedback by peers than can be provided by teachers to individual students who require extra assistance. Recent studies suggest that students with LD may need adaptations during cooperative learning activities. The use of assistive technology adaptations may be necessary to help some students with LD compensate for their specific learning difficulties so that they can engage more readily in cooperative learning activities. A process for integrating technology adaptations into cooperative learning activities is discussed in terms of three components: selecting adaptations, monitoring the use of the adaptations during cooperative learning activities, and evaluating the adaptations' effectiveness. The article concludes with comments regarding barriers to and support systems for technology integration, technology and effective instructional practices, and the need to consider technology adaptations for students who have learning disabilities.

Network evolution model for supply chain with manufactures as the core

Science.gov (United States)

Jiang, Dali; Fang, Ling; Yang, Jian; Li, Wu; Zhao, Jing

2018-01-01

Building evolution model of supply chain networks could be helpful to understand its development law. However, specific characteristics and attributes of real supply chains are often neglected in existing evolution models. This work proposes a new evolution model of supply chain with manufactures as the core, based on external market demand and internal competition-cooperation. The evolution model assumes the external market environment is relatively stable, considers several factors, including specific topology of supply chain, external market demand, ecological growth and flow conservation. The simulation results suggest that the networks evolved by our model have similar structures as real supply chains. Meanwhile, the influences of external market demand and internal competition-cooperation to network evolution are analyzed. Additionally, 38 benchmark data sets are applied to validate the rationality of our evolution model, in which, nine manufacturing supply chains match the features of the networks constructed by our model. PMID:29370201

Network evolution model for supply chain with manufactures as the core.

Science.gov (United States)

Fang, Haiyang; Jiang, Dali; Yang, Tinghong; Fang, Ling; Yang, Jian; Li, Wu; Zhao, Jing

2018-01-01

Building evolution model of supply chain networks could be helpful to understand its development law. However, specific characteristics and attributes of real supply chains are often neglected in existing evolution models. This work proposes a new evolution model of supply chain with manufactures as the core, based on external market demand and internal competition-cooperation. The evolution model assumes the external market environment is relatively stable, considers several factors, including specific topology of supply chain, external market demand, ecological growth and flow conservation. The simulation results suggest that the networks evolved by our model have similar structures as real supply chains. Meanwhile, the influences of external market demand and internal competition-cooperation to network evolution are analyzed. Additionally, 38 benchmark data sets are applied to validate the rationality of our evolution model, in which, nine manufacturing supply chains match the features of the networks constructed by our model.

Network evolution model for supply chain with manufactures as the core.

Directory of Open Access Journals (Sweden)

Haiyang Fang

Full Text Available Building evolution model of supply chain networks could be helpful to understand its development law. However, specific characteristics and attributes of real supply chains are often neglected in existing evolution models. This work proposes a new evolution model of supply chain with manufactures as the core, based on external market demand and internal competition-cooperation. The evolution model assumes the external market environment is relatively stable, considers several factors, including specific topology of supply chain, external market demand, ecological growth and flow conservation. The simulation results suggest that the networks evolved by our model have similar structures as real supply chains. Meanwhile, the influences of external market demand and internal competition-cooperation to network evolution are analyzed. Additionally, 38 benchmark data sets are applied to validate the rationality of our evolution model, in which, nine manufacturing supply chains match the features of the networks constructed by our model.

Investigating factors that influence level and dynamics of capital productivity in plants manufacturing equipment for mines

Energy Technology Data Exchange (ETDEWEB)

Karenov, R.S. (Karagandinskii Politekhnicheskii Institut (USSR))

1990-10-01

Analyzes productivity of capital in plants manufacturing equipment for underground coal mining in the USSR. Effects of the following factors are evaluated: working time, investment, mechanization of manufacturing processes, power of motors used to drive the manufacturing equipment, duration of a manufacturing cycle, cooperation degree, equipment service life. Effects of insufficient specialization of manufacturing plants and the manufacturing of mining equipment by repair shops of individual mines which should rather specialize in equipment repair and maintenance are evaluated. Analysis shows that specialization of the manufacturing plants could increase productivity of capital by 1.5-2.0 times, reduce labor consumption by 3-5 times and consumption of materials by 1.5-1.7 times. 4 refs.

International cooperation for Mars exploration and sample return

Science.gov (United States)

Levy, Eugene H.; Boynton, William V.; Cameron, A. G. W.; Carr, Michael H.; Kitchell, Jennifer H.; Mazur, Peter; Pace, Norman R.; Prinn, Ronald G.; Solomon, Sean C.; Wasserburg, Gerald J.

1990-01-01

The National Research Council's Space Studies Board has previously recommended that the next major phase of Mars exploration for the United States involve detailed in situ investigations of the surface of Mars and the return to earth for laboratory analysis of selected Martian surface samples. More recently, the European space science community has expressed general interest in the concept of cooperative Mars exploration and sample return. The USSR has now announced plans for a program of Mars exploration incorporating international cooperation. If the opportunity becomes available to participate in Mars exploration, interest is likely to emerge on the part of a number of other countries, such as Japan and Canada. The Space Studies Board's Committee on Cooperative Mars Exploration and Sample Return was asked by the National Aeronautics and Space Administration (NASA) to examine and report on the question of how Mars sample return missions might best be structured for effective implementation by NASA along with international partners. The committee examined alternatives ranging from scientific missions in which the United States would take a substantial lead, with international participation playing only an ancillary role, to missions in which international cooperation would be a basic part of the approach, with the international partners taking on comparably large mission responsibilities. On the basis of scientific strategies developed earlier by the Space Studies Board, the committee considered the scientific and technical basis of such collaboration and the most mutually beneficial arrangements for constructing successful cooperative missions, particularly with the USSR.

International co-operation in the supply of nuclear fuel and fuel cycle services

International Nuclear Information System (INIS)

Sievering, N.F. Jr.

1977-01-01

Recent changes in the United States' nuclear policy, in recognition of the increased proliferation risk, have raised questions of US intentions in international nuclear fuel and fuel-cycle service co-operation. This paper details those intentions in relation to the key elements of the new policy. In the past, the USA has been a world leader in peaceful nuclear co-operation with other nations and, mindful of the relationships between civilian nuclear technology and nuclear weapon proliferation, remains strongly committed to the Non-Proliferation Treaty, IAEA safeguards and other elements concerned with international nuclear affairs. Now, in implementing President Carter's nuclear initiatives, the USA will continue its leading role in nuclear fuel and fuel-cycle co-operation in two ways, (1) by increasing its enrichment capacity for providing international LWR fuel supplies and (2) by taking the lead in solving the problems of near and long-term spent fuel storage and disposal. Beyond these specific steps, the USA feels that the international community's past efforts in controlling the proliferation risks of nuclear power are necessary but inadequate for the future. Accordingly, the USA urges other similarly concerned nations to pause with present developments and to join in a programme of international co-operation and participation in a re-assessment of future plans which would include: (1) Mutual assessments of fuel cycles alternative to the current uranium/plutonium cycle for LWRs and breeders, seeking to lessen proliferation risks; (2) co-operative mechanisms for ensuring the ''front-end'' fuel supply including uranium resource exploration, adequate enrichment capacity, and institutional arrangements; (3) means of dealing with short-, medium- and long-term spent fuel storage needs by means of technical co-operation and assistance and possibly establishment of international storage or repository facilities; and (4) for reprocessing plants, and related fuel

78 FR 9939 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-U.S. Photovoltaic...

Science.gov (United States)

2013-02-12

... DEPARTMENT OF JUSTICE Antitrust Division Notice Pursuant to the National Cooperative Research and Production Act of 1993--U.S. Photovoltaic Manufacturing Consortium, Inc. Notice is hereby given that, on..., 15 U.S.C. 4301 et seq. (``the Act''), U.S. Photovoltaic Manufacturing Consortium, Inc. (``USPVMC...

78 FR 58559 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-U.S. Photovoltaic...

Science.gov (United States)

2013-09-24

... DEPARTMENT OF JUSTICE Antitrust Division Notice Pursuant to the National Cooperative Research and Production Act of 1993--U.S. Photovoltaic Manufacturing Consortium, Inc. Notice is hereby given that, on..., 15 U.S.C. 4301 et seq. (``the Act''), U.S. Photovoltaic Manufacturing Consortium, Inc. (``USPVMC...

Cellular Controlled Short-Range Communication for Cooperative P2P Networking

DEFF Research Database (Denmark)

Fitzek, Frank H. P.; Katz, Marcos; Zhang, Qi

2009-01-01

-range communication network among cooperating mobile and wireless devices. The role of the mobile device will change, from being an agnostic entity in respect to the surrounding world to a cognitive device. This cognitive device is capable of being aware of the neighboring devices as well as on the possibility......This article advocates a novel communication architecture and associated collaborative framework for future wireless communication systems. In contrast to the dominating cellular architecture and the upcoming peer-to-peer architecture, the new approach envisions a cellular controlled short...... to establish cooperation with them. The novel architecture together with several possible cooperative strategies will bring clear benefits for the network and service providers, mobile device manufacturers and also end users....

Tritium target manufacturing for use in accelerators

Science.gov (United States)

Bach, P.; Monnin, C.; Van Rompay, M.; Ballanger, A.

2001-07-01

As a neutron tube manufacturer, SODERN is now in charge of manufacturing tritium targets for accelerators, in cooperation with CEA/DAM/DTMN in Valduc. Specific deuterium and tritium targets are manufactured on request, according to the requirements of the users, starting from titanium target on copper substrate, and going to more sophisticated devices. A wide range of possible uses is covered, including thin targets for neutron calibration, thick targets with controlled loading of deuterium and tritium, rotating targets for higher lifetimes, or large size rotating targets for accelerators used in boron neutron therapy. Activity of targets lies in the 1 to 1000 Curie, diameter of targets being up to 30 cm. Special targets are also considered, including surface layer targets for lowering tritium desorption under irradiation, or those made from different kinds of occluders such as titanium, zirconium, erbium, scandium, with different substrates. It is then possible to optimize either neutron output, or lifetime and stability, or thermal behavior.

Efficacy of Lean Manufacturing to Improve Production Performance

Directory of Open Access Journals (Sweden)

Israel Balogun

2016-12-01

Full Text Available The lean manufacturing system is a technique of manufacturing products in time. The concept of lean manufacturing principles employs simpler ways of communicating required materials as well as manual technique in ensuring the provision of signals for replenishment of materials the production companies require. Performance on the other hand, can be considered the attainment of value effectively and efficiently. Lean manufacturing and performance production goes hand in hand. Through utilizing lean manufacturing method, most companies would be able to tailor their processes in achieving effective performance and meeting unique requests from their consumers. The exploratory observations conducted in the study was purposely for examining the nature of complex interactions involved between major constructs and environmental sustainability at the parent company and the tire part vendors. The method of the research was a qualitative case study. The research data were obtained from with the case company and through structured interviews the case company's consumers. The case-specific tools were first developed in close co-operation with the case company. Future research agenda addresses gaps in the current literature and suggests relevant framework from which to explore this phenomenon.

Solution of electric power quality problems by troika cooperation

International Nuclear Information System (INIS)

Khan, N.; Ahmad, M.I.

1999-01-01

Power quality is a growing concern effecting utility supply continuity, sensitivity customer productivity and manufacturer equipment. Power quality problems such as voltage sags, swells, distortions and transient surges caused by short circuit faults or motor starting, switching reactive loads or phase to ground faults. VSD or arcing loads and inductive or capacity load switching may result in process shutdown or contactor dropout, under voltage tripping and speed drift or ASD tripping. This work describes results of a power quality study concluding urgent need for enhancing cooperation between utilities, customers and manufactures to improve power quality problems. Individual responsibilities of utilities personnel, sensitive equipment customers and power equipment manufacturers in light of available power conditioning technology, regarding deployment of equipment and improvement of design strategies have been discussed for precious end users. (authors)

Training activities at FSUE 'RADON' and Lomonosov's Moscow state university under practical arrangements with IAEA

International Nuclear Information System (INIS)

Batyukhnova, O.G.; Karlina, O.K.; Neveykin, P.P.; Kalmykov, S.N.; Ojovan, M.I.

2013-01-01

The International Education Training Centre (IETC) at Moscow Federal State Unitary Enterprise (FSUE) 'Radon', in co-operation with the International Atomic Energy Agency (IAEA), has developed expertise and provided training to waste management personnel for the last 15 years. Since 1997, the educational system of the enterprise with the support of the IAEA has acquired an international character: more than 470 experts from 35 countries - IAEA Member States completed the professional development. Training is conducted at various thematic courses or fellowships for individual programs and seminars on IAEA technical projects. In June 2008 a direct agreement (Practical Arrangements) has been signed between FSUE 'Radon' and the IAEA on cooperation in the field of development of new technologies, expert's advice to IAEA Member States, and, in particular, the training of personnel in the field of radioactive waste management (RWM), which opens up new perspectives for fruitful cooperation of industry professionals. A similar agreement - Practical Arrangements - has been signed between Lomonosov's MSU and the IAEA in 2012. In October 2012 a new IAEA two-weeks training course started at Lomonosov's MSU and FSUE 'Radon' in the framework of the Practical Agreements signed. Pre-disposal management of waste was the main topic of the courses. The paper summarizes the current experience of the FSUE 'Radon' in the organization and implementation of the IAEA sponsored training and others events and outlines some of strategic educational elements, which IETC will continue to pursue in the coming years. (authors)

Co-operatives as heating entrepreneurs

International Nuclear Information System (INIS)

Honkasalo, M.

2000-01-01

The objective of heating entrepreneurship functioning in the form of a co operative is to make the use of the wood chips competitive primarily through district heating of municipal centres. When compared with the conventional heating mode the reliability of chip delivery and the remuneration paid to the co-operative for attending to the running of the heating centres are considered to be the competitive advantages. The system has proven to be a working one; one indication of this is its growing application in the country. In the spring of the year 2000 there were 26 chip-based energy co-operative active in Finland. The first time that the use of bioenergy underwent a powerful rise was in the 1970s as a consequence of the oilcrises. Subsequently the enthusiasm shown to this energy form subsided. Then in the early 1990s, biofuels once again became a subject of interest mainly due to environmental issues, the restructuring of rural areas and silvicultural reasons. With the past decades' experiences forming the basis, the development needs associated with the use of bioenergy were in fresh memory and they were addressed on a wide font. Boiler technology related to solid fuels evolved rapidly and the least successful manufacturers had been eliminated by the recession. In the case of co-operative heating entrepreneurship, the commonest form neither the district heating centre nor the system of heat-transfer pipes belong to co-operative society. The co-operative is responsible only for the delivery of the fuel and for looking after the heating plant. Remuneration is generally based on the amount of energy leaving the district heating plant. Thus the heat dissipated at the heating plant is the co-operative's problem and the heat dissipated during transfer are the energy buyer's problem. The investor in the equipments usually the local municipality or an energy utility. In some cases the co-operative owns the equipments well, in which case it is correct to speak of

The present status of International Nuclear Cooperation of Korea and the expectations from PNC's role

International Nuclear Information System (INIS)

Kim, S.C.

1992-01-01

The international cooperation activities for peaceful uses of nuclear energy in Korea started with the cooperation and assistance provided by advanced countries in the early 1960s when a feasibility study for a nuclear power reactor was carried out for its introduction into the Korean power system. Currently, we have 9 nuclear energy cooperation agreements concluded with foreign governments and also maintain cooperation relations with power companies, research institutes, A/E companies, manufacturers, etc. in 15 countries. The international cooperation activities cover a wide range of nuclear industries from design of nuclear power plant to nuclear fuel cycle, but need to expand into exchange of co-operation for noncommercial nuclear safety and cultural aspects. It is relatively simple and easy to realize international nuclear cooperation on commercial base such as nuclear reactor procurement contract, but unfavorable result can be expected from noncommercial transactions

International cooperation in cold forging technology

DEFF Research Database (Denmark)

Bay, Niels; Lange, K

1992-01-01

International cooperation in the field of cold forging technology started in 1961 by formation of the OECD Group of Experts on Metal Forming. In 1967 this group was transformed into the International Cold Forging Group, ICFG, an independent body which has now been operative for 25 years. Members...... of the ICFG are personally elected by the Plenary as experts within the field, often representing national groups within cold forging. The main work within the ICFG is carried out in its subgroups which are established by the Plenary to collect, compile and evaluate data and eventually also produce data...... by cooperative activities or by instigating national research. These subgroups have produced 9 data sheets and 7 guidelines on subjects such as materials, tool design and construction, calculation methods for cold forging tools, manufacture of slugs, lubrication aspects and small quantity production. Plenary...

An exploratory study of close supplier-manufacturer relationships

OpenAIRE

Goffin, Keith; Lemke, Fred; Szwejczewski, Marek

2006-01-01

Close relationships with selected suppliers can enable manufacturers to reduce costs, improve quality and enhance new product development. Although the advantages of close co-operation are widely acknowledged in the literature, the specific attributes of such relationships are not well understood. To address this gap, 39 managers responsible for purchasing were interviewed using a technique from psychology, which is particularly effective at uncovering the characteristics of...

ENHANCING EU-TAIWAN ECONOMIC COOPERATION AGREEMENT

Directory of Open Access Journals (Sweden)

Chung-hung Cho

2018-01-01

Full Text Available The EU’s 2015 new trade strategy: Trade for all: toward a more responsible trade and investment policy, highlights its key role in keeping markets open worldwide and lists the Asia-Pacific region as the priority party for signing Regional Trade Arrangements (RTAs with the EU. The new strategy allows the EU and its member states to initiate talks on economic cooperation agreement (ECA with Taiwan. This article takes the EU-Asia interregional cooperation as a case study while exploring the role of Taiwan in the region. The first section describes the shift in EU’s trade policies and the special features of the types of interregionalism between the EU and Asia. The second section explores the bilateral trade relations. The third section evaluates the opportunities and the internal and external challenges and limitations of an EU-Taiwan ECA, emphasizing the factor of mainland China. The final section provides conclusions on the influence of an EU-Taiwan ECA on the relations of EUTaiwan considering economic and non-economic factor

Interlibrary cooperation: from ILL to IAIMS and beyond.

Science.gov (United States)

Riordan, M L; Perry, G J

1999-07-01

A recent solicitation over the MEDLIB-L e-mail discussion list revealed over thirty diverse examples of hospital library-based interlibrary cooperative initiatives currently underway. Many are familiar and have been featured in the professional literature. Most go unreported and unrecognized however, comprising invisible resource-sharing infrastructures that hospital librarians painstakingly piece together in order to provide their clients with expanded service options. This paper, drawing from the MEDLIB-L survey as well as descriptions in the published literature, provides a broad overview of such recent interlibrary cooperative efforts. Examples include interlibrary loan networks, collective purchasing initiatives, holder-of-record or union catalog access agreements, arrangements to provide e-mail and Internet access, and consortia to share electronic resources. Examples were chosen based on the initiatives' diversity of participants, and represent a wide range of locations across the United States. Such initiatives focus on local, statewide, or regional collaboration, and several involve partnerships between academic medical center libraries and regional hospital libraries. An early example of a hospital-based interlibrary cooperative IAIMS effort is described, pointing to future possibilities involving the Internet and regional hospital system intranets.

Paths towards Family-friendly Working Time Arrangements: Comparing Workplaces in Different Countries and Industries.

Science.gov (United States)

Wiß, Tobias

2017-12-01

Although studies have examined the distribution and conditions of employer-provided work-family arrangements, we still lack a systematic investigation of how these vary for different countries and industries. Based on the European Working Conditions Survey 2010, this study examines the conditions under which firms provide family-friendly working time arrangements and what the differences are across four countries (Austria, Denmark, Italy and the UK) and four industries. The impact of employee representatives, employee involvement, manager support and female managers varies across countries and industries because of the institutional environment (prevailing family model, industrial relations) and workforce composition (gender). The impact of employee representatives depends on their co-determination rights, and the direction of their effect on the prevailing family model (e.g. negative in conservative countries such as Austria) and the gender composition of the workforce (negative in male-dominated production, but positive in services). Employee involvement in the work organization is significantly positive in Austria and Denmark (both with co-operative industrial relations), while manager support has the strongest effect in the UK (liberal regime). At the industry level, female supervisors are positively associated with family-friendly working time arrangements only in the male-dominated production industry. These findings suggest that the effects of agency variables and their direction vary depending on the institutional context.

Rotary kiln arrangements

International Nuclear Information System (INIS)

Hayes, M.R.

1983-01-01

In a rotary kiln arrangement in which a reaction is to occur between counterflowing reactants and material is discharged through a hopper, an injector for at least one reactant extends into a reaction zone of the kiln, means being provided for the reaction zone to be maintained within a desired temperature range. The said means includes heating elements for adjusting the temperature of the injected reactant to a temperature within the desired range while it is in the injector. The arrangement may be used in the production of uranium oxides from uranium hexafluoride. (author)

42 CFR 413.241 - Pharmacy arrangements.

Science.gov (United States)

2010-10-01

... 42 Public Health 2 2010-10-01 2010-10-01 false Pharmacy arrangements. 413.241 Section 413.241... Disease (ESRD) Services and Organ Procurement Costs § 413.241 Pharmacy arrangements. Effective January 1, 2011, an ESRD facility that enters into an arrangement with a pharmacy to furnish renal dialysis...

Santee Cooper cross units 3 & 4: an EPCM success

Energy Technology Data Exchange (ETDEWEB)

Hickson, K.; Neher, S.; Koontz, N. [WorleyParons (United States)

2009-05-15

In late 2001, Santee Cooper began a project to add a third 600 MW unit to its coal-fired Cross Generating Station in Cross, S.C. Plans also included a fourth unit to be added later. The engineering, procurement and construction (EPCM) of Units 3 and 4 would eventually span almost seven years. The Cross Project demonstrates how Santee Cooper empowered its EPCM contractor to manage for change and how a well conceived plan and thoroughly developed schedule provide the necessary structure and flexibility to successful do so. The Cross Project experience reinforces the idea that for large projects an EPCM arrangement provides the agility necessary to manage change and the means to manage risk. The design, furnish and erect contracts were performance based contracts executed early to firm up the plant design and layout. 2 photos.

US/Japan Cooperation in High Energy Physics. Review of activities, 1988--1993

Energy Technology Data Exchange (ETDEWEB)

1993-11-16

The objective of the Implementing Arrangement was to further the energy programs of both countries by establishing a framework for cooperation in the field of high energy physics, including research, accelerator and detector instrumentation research and development, the fabrication and subsequent use of new experimental devices and facilities, and related joint efforts as may be mutually agreed. Over the years, this cooperation has been very effective and has strengthened the overall collaborative efforts and the understanding between our nations and their citizens. It has demonstrated to the world our ability to work together to attack difficult problems. High Energy Physics goes across national borders; the bond is clearly intellectual and common ground is shared for the benefit of all in a most effective manner. This review covers the activities conducted under the aegis of the US/Japan Committee for Cooperation in High Energy Physics during the past five years (1988--1993). This was the second such US review of the US/Japan cooperative activities; the first was held in 1987.

76 FR 45618 - Solicitation for a Cooperative Agreement-Two Hearings of the National Institute of Corrections...

Science.gov (United States)

2011-07-29

... on the subject of organizational culture (hearing 1) and cost containment (hearing 2). The first... under this cooperative agreement will organize and coordinate all logistical details for two hearings of... or NIC staff travel, lodging, or per diem costs. Arrangements should allow for up to 25 observers who...

Arrangement for Cooperation and Exchange of Information between the Atomic Energy Control Board of Canada and the Health and Safety Executive of the United Kingdom

International Nuclear Information System (INIS)

1991-01-01

Under this Arrangement which covers the period 31 May 1991 to 1 June 1996, the Parties may exchange information on administrative, regulatory and technical questions as well as on press and public reactions to incidents. The information could concern the nuclear installation itself (siting, decommissioning), or safety (assessments, research and development work) or treatment of radioactive wastes. The Arrangement also covers information concerning any event that has a major radiological significance and the remedial actions undertaken in response. In addition, the Arrangement lists excepted information, for example for national security or commercial reasons. (NEA) [fr

29 CFR 779.229 - Other arrangements.

Science.gov (United States)

2010-07-01

..., Franchise and Other Business Arrangements § 779.229 Other arrangements. With respect to those arrangements...” establishment will be considered a part of the same “enterprise.” For example, whether a franchise, lease, or... the enterprise which grants the franchise, right, or concession. (S. Rept. 145, 87th Cong., 1st Sess...

Business process integration between European manufacturers and transport and logistics service providers

DEFF Research Database (Denmark)

Mortensen, Ole; Lemoine, W

2005-01-01

The goal of the Supply Chain Management process is to create value for customers, stakeholders and all supply chain members, through the integration of disparate processes like manufacturing flow management, customer service and order fulfillment. However, many firms fail in the path of achieving...... a total integration. This study illustrates, from an empirical point of view, the problems associated to SC integration among European firms operating in global/international markets. The focus is on the relationship between two echelons in the supply chain: manufacturers and their transport and logistics...... service providers (TLSPs). The paper examines (1) the characteristics of the collaborative partnerships established between manufacturers and their TLSPs; (2) to what extent manufacturers and their TLSPs have integrated SC business processes; (3) the IT used to support the SC cooperation and integration...

Research contributions to the modelling and design of Intelligent Manufacturing Systems

DEFF Research Database (Denmark)

Langer, Gilad; Sørensen, Christian; Stylios, C.

1999-01-01

This joint paper is the result of the work of cluster 3-4 within the Esprit WG no. 21955 on Intelligent Manufacturing Systems (IMS) working group. The paper conveys the results of a co-operative research effort between LAR Patras (Greece), DTU (Denmark), CRAN/GSIP (France) and Aachen WZL (Germany...

Correlation analysis of fracture arrangement in space

Science.gov (United States)

Marrett, Randall; Gale, Julia F. W.; Gómez, Leonel A.; Laubach, Stephen E.

2018-03-01

We present new techniques that overcome limitations of standard approaches to documenting spatial arrangement. The new techniques directly quantify spatial arrangement by normalizing to expected values for randomly arranged fractures. The techniques differ in terms of computational intensity, robustness of results, ability to detect anti-correlation, and use of fracture size data. Variation of spatial arrangement across a broad range of length scales facilitates distinguishing clustered and periodic arrangements-opposite forms of organization-from random arrangements. Moreover, self-organized arrangements can be distinguished from arrangements due to extrinsic organization. Traditional techniques for analysis of fracture spacing are hamstrung because they account neither for the sequence of fracture spacings nor for possible coordination between fracture size and position, attributes accounted for by our methods. All of the new techniques reveal fractal clustering in a test case of veins, or cement-filled opening-mode fractures, in Pennsylvanian Marble Falls Limestone. The observed arrangement is readily distinguishable from random and periodic arrangements. Comparison of results that account for fracture size with results that ignore fracture size demonstrates that spatial arrangement is dominated by the sequence of fracture spacings, rather than coordination of fracture size with position. Fracture size and position are not completely independent in this example, however, because large fractures are more clustered than small fractures. Both spatial and size organization of veins here probably emerged from fracture interaction during growth. The new approaches described here, along with freely available software to implement the techniques, can be applied with effect to a wide range of structures, or indeed many other phenomena such as drilling response, where spatial heterogeneity is an issue.

IAEA, EU Senior Officials Review Nuclear-Related Cooperation, Chart Way Ahead

International Nuclear Information System (INIS)

Amano, Y.

2014-01-01

International Atomic Energy Agency (IAEA) and European Union officials met this week for the second annual Senior Officials Meeting to review and further strengthen their nuclear-related cooperation. In the past year, the two institutions have improved collaboration in nuclear safety, security, safeguards and peaceful use of nuclear energy through implementing a number of initiatives. In 2013, new contracts for projects have been signed amounting to approximately 24 million euros. These included an EU Council decision to support IAEA nuclear security and verification activities worth of 8.05 million euros. Furthermore, a Memorandum of Understanding establishing a framework for cooperation to help improve nuclear safety was signed, as well as the Practical Arrangement on technical nuclear security issues. The EU and the IAEA have also worked to explore and identify new areas for cooperation such as using nuclear applications for socio-economic development. The meeting addressed enhanced cooperation in the areas of nuclear safety, nuclear security, nuclear applications, nuclear energy and safeguards. Participants agreed on the following steps, including holding a Senior Officials Meeting planned in early 2015 in the premises of the European Commission in Luxembourg

Report on 'manufacturing technology supported by advanced and integrated information system through international cooperation'. Domestic surveys; 'Kan'i sosagata denshi sekkei seisan shien system no kaihatsu ni kansuru kenkyu kyoryoku' ni kansuru hokokusho. Kokunai chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-03-01

The committee of manufacturing technology supported by advanced and integrated information system through international cooperation (MATIC) has been established as the organization to promote necessary surveys, deliberate the research and development guidelines and themes, and thereby support the joint R and D projects with Asian countries to improve information systems for their manufacturing industries by MATIC. The R and D skeletons are set in FY 1994 for the works in and after FY 1995. The relationships between affiliates of Japanese enterprises and local enterprises, actual conditions of the manufacturing industries and so on are surveyed, in order to extract problems related to the information systems for the promising manufacturing industries in the Asian countries. Each industry has its own characteristics with respect to, e.g., numbers f parts and process steps, product life cycle, extent of automation, skill of workers, and spread of the related industries. Therefore, 3 industrial areas are picked up as those considered to be adequate for the case studies, and surveyed for the system functions, performance, elementary techniques and so on which are required to establish the information systems for their production systems. (NEDO)

Living Arrangements of Young Adults in Europe

Directory of Open Access Journals (Sweden)

Katrin Schwanitz

2015-12-01

Full Text Available Comparative research suggests that there are great cross-national and cross-temporal differences in living arrangements of young adults aged 18-34 in Europe. In this paper, we examine young adults’ living arrangements (1 across several European countries and different national contexts, and (2 by taking into account cross-time variability. In doing so, we pay careful attention to a comprehensive conceptualisation of living arrangements (including extended and non-family living arrangements. The aim of this paper is to deepen our understanding of family structure and household arrangements in Europe by examining and mapping the cross-national and cross-temporal variety of young adults’ living arrangements. For our analysis we use data from the Integrated Public Use Microdata Series International (IPUMSi for the census rounds 1980, 1990, and 2000 for eight European countries (Austria, France, Greece, Hungary, Ireland, Portugal, Romania, and Switzerland. We employ log-linear models to ascertain the influence of individual and contextual factors on living arrangements. The analyses lend further support to a North/West – South/East divide in living arrangements and general gender differentials in extended family living. Other interesting results are the heterogeneity in the living arrangements of single mothers across geographic areas, and the upward trend of extended household living for young men and women between 1980 and 2000.

International Cooperation for the Dismantling of Chooz A Reactor Pressure Vessel

International Nuclear Information System (INIS)

Grenouillet, J.J.; Posivak, E.

2009-01-01

Chooz A is the first PWR that is being decommissioned in France. The main issue that is conditioning the success of the project is the Reactor Pressure Vessel (RPV) and Reactor Vessel Internals (RVI) segmentation. Whereas Chooz A is the first and unique RPV and RVI being dismantled in France, there are many similar experiences available in the world. Thus the project team was eager to cooperate with other teams facing or being faced with the same issue. A cooperation programme was established in two separate ways: - Benefiting from experience feedback from completed RPV and RVI dismantling projects, - Looking for synergy with future RPV dismantling projects for activities such as segmentation tools design, qualification and manufacturing for example. This paper describes the implementation of this programme and how the outcome of the cooperation was used for the implementation of Chooz-A RPV and RVI segmentation project. It shows also the limits of such a cooperation. (authors)

The quality assurance topical report - International co-operation for manufacturing of nuclear packages

International Nuclear Information System (INIS)

Anderson, R.; Bonifacio, A.; Kingsley, K.; Bittner, R.; Ankrum, G.T.; Wieser, K.E.

1987-01-01

The paper addresses the manufacturing quality assurance (QA) concerns associated with fabrication of radioactive material packaging in one country for use in another. A case study is discussed which shows a method of implementation that has been successfully practised for casks fabricated in the Federal Republic of Germany (FRG) for use in the USA. The casks utilized are the Castor series, which are fabricated in the FRG from ductile cast iron. Although international efforts have helped to standardize QA measures, detailed implementation can vary from country to country. A means of co-ordinating requirements between countries was required. The vehicle used to accomplish this was the Quality Assurance Topical Report (QATR), which is an administrative QA document that clearly defines the roles and responsibilities of all affected organizations. The close correlation of requirements is documented in the QATR. In addition, a programme is described which permits the USA competent authority to depend on the FRG authority for inspection and enforcement procedures. It is of great importance that the fabrication and inspection of any component important to safety be properly controlled and documented. The USA requirements for these QA measures are enforced by the Nuclear Regulatory Commission (NRC). Enforcement of applicable regulations in the FRG is the responsibility of the competent authority, Bundesanstalt fuer Materialpruefung (BAM). As a part of the development of this QATR, NRC and BAM representatives met to establish a mutual understanding of QA. As a result, the QATR concept has been approved by both BAM and the NRC. A problem with manufacturing equipment in a foreign country is the need to periodically send company representatives to witness hold points and to review manufacturing records. The methods described in the QATR provide a practical and workable alternative by permitting the BAM to serve as the purchaser (or utility) agent. The utility is only required

Overview and status of ITER Cryostat manufacturing

Energy Technology Data Exchange (ETDEWEB)

Bhardwaj, Anil K., E-mail: anil.bhardwaj@iter-india.org [ITER-India, Institute For Plasma Research, A-29, GIDC Electronics Estate, Sector-25, Gandhinagar 382016 (India); Gupta, Girish; Prajapati, Rajnikant; Joshi, Vaibhav; Patel, Mitul; Bhavsar, Jagrut; More, Vipul; Jindal, Mukesh; Bhattacharya, Avik; Jogi, Gourav; Palaliya, Amit; Jha, Saroj; Pandey, Manish; Shukla, Dileep [ITER-India, Institute For Plasma Research, A-29, GIDC Electronics Estate, Sector-25, Gandhinagar 382016 (India); Iyer, Ganesh; Jadhav, Pandurang; Goyal, Dipesh; Desai, Anish [Larsen & Toubro Limited, Heavy Engineering, Hazira Manufacturing Complex, Gujarat (India); Sekachev, I.; Vitupier, Guillaume [ITER Organization, Route de Vinon sur Verdon – CS 90046, 13067 Saint Paul Lez Durance Cedex (France); and others

2016-11-01

Highlights: • Manufacturing status of one of the largest and the heaviest fully welded stainless steel vacuum chambers in the world (ITER Cryostat). • Overview of manufacturing stages and its segmentation. • Overview of manufacturing procedures and assembly and installation. - Abstract: One of ITER-India's commitments to the ITER Organization is procurement of the ITER Cryostat. It is a large vacuum vessel (∼29 m dia. and ∼29 m height), which is made up of 304/304 L dual marked stainless steel and has a total mass over 3500 t. The thickness of the vessel wall varies from 50 mm to 190 mm. It is one of the largest and the heaviest fully welded stainless steel vacuum chambers in the world which provides vacuum thermal insulation for the superconducting magnets operating at 4.5 K and for the thermal shield operating at 80 K. It also mechanically supports the magnet system along with the vacuum vessel (VV). The cryostat is designed and constructed according to ASME Section-VIII Division-2 with additional ITER Vacuum Handbook requirements and it is classified as protection important component (PIC-2). Manufacturing of cryostat segments is ongoing in India; sub-assembly of four major sections of the cryostat from the segments will be done at the ITER site in a temporary workshop building and the final assembly will be done in the pit of the tokamak building, the final location. The cryostat manufacturing contract has been awarded to Larsen and Toubro Limited in August 2012 after completion of design [4] and signing of Procurement Arrangement [1] with ITER Organization. Manufacturing of the cryostat was started in January 2014 after approval of the manufacturing drawings and procedures. The temporary workshop of 44 m × 110 m × 26 m in height has been completed in November 2014 at the ITER site with a 200 t crane installed. This paper gives an overview and the status of the cryostat manufacturing.

National arrangements for radiotherapy

International Nuclear Information System (INIS)

2007-01-01

After a presentation of several letters exchanged between the French health ministry and public agencies in charge of public health or nuclear safety after a radiotherapy accident in Epinal, this report comments the evolution of needs in cancerology care and the place given to radiotherapy. It outlines the technological and organisational evolution of radiotherapy and presents the distribution of radiotherapy equipment, of radio-therapists and other radiotherapy professionals in France. Within the context of radiotherapy accidents which occurred in 2007, it presents the regulatory arrangements which aimed at improving the safety, short term and middle term arrangements which are needed to support and structure radiotherapy practice quality. It stresses the fact that the system will deeply evolve by implementing a radiotherapy vigilance arrangement and a permanent follow-on and adaptation plan based on surveys and the creation of a national committee

Regulations and guidelines from the manufacturers' point of view

International Nuclear Information System (INIS)

Orth, K.H.

1977-01-01

Work on regulations and guidelines is a prerequisite for a better utilization of capacities, for improvements with regard to the licensing procedure and for a more efficient use of the available potential of engineers at the manufacturers' side who, freed from routine tasks, might be charged with further improving the safety of plants. Regulations and guidelines enable a shortening of the planning and building time, an employment of well-tried techniques and directions, multiple use of manufacturing documents, a reduction of the risks to be met in the planning, construction and start-up phases. They enable mass-production of components to be finished at a fixed date, a standardized operation manual and standardized staff training. Cooperation of nuclear power plant manufacturers in drawing up regulations and guidelines is thus not only an issue for the present, but also an investment for the future. (orig./HP) [de

Manufacturing of neutron reflector frame for JMTR

International Nuclear Information System (INIS)

Hanawa, Yoshio; Tsuboi, Kazuaki; Takahashi, Kunihiro; Uchida, Munenori; Suzuki, Ken

2010-03-01

Beryllium has been used as the neutron reflector in the Japan Materials Testing Reactor (JMTR). A beryllium frame is arranged in the JMTR core and the frame consists of 3 sections (North, East and West). Each section has 7 stories of the beryllium blocks. Each block is connected by the aluminium joints. The capsule or the berylium plug is located in the inside of the beryllium frame. The first criticality achieved in 1968 and the frame has been replaced 6 times and now the 7th frame is being manufactured. The replacement is planned to be done in the spring of 2010. The design has been modified to decrease the swelling camber and the lifetime has been improved. The manufacturing procedure is severely controlled to assure the quality. The chemical composition must be specified to minimize the swelling and radiation. The machining procedure is highly controlled because beryllium is very brittle. And the environmental control is also important, because the beryllium is a toxic material. (author)

Natural gas co-operation in the Baltic region

International Nuclear Information System (INIS)

Jensen, J.K.

1996-01-01

Co-operation between the gas companies in the Baltic Region has been in place for several years. The overview given in this paper shows that the co-operation has been developed in trade, investments, privatisation and participation in the restructuring process. Finally, through a broad technical co-operation, significant efforts are made to establish common operational practices, codes and standards and the integrity of gas transmission pipelines. The Baltic Region, from a resource and gas interconnection point of view, enjoys a strategic position in the future development of the gas industry in Europe. The Baltic gas sector represents an interesting and growing gas market with the significant gas storage capacity. The region is also located strategically for planned gas interconnections and could serve as a transit corridor for the future gas supplies from western Siberia or the North Sea. This co-operation in the region is being supported by international regulations and agreements such as the Energy Charter between the European Union and the central and east European countries. However, at present the gas industry in the Baltic Region seems to be ahead of these international agreements. It may well be seen that trade arrangements such as Third Party Access are implemented directly by market forces rather than through international agreements. The regional development may thus be a driving force for the implementation of the Internal Energy Market for the gas industry

Problems in manufacturing and transport of pressure vessels of integral reactors

International Nuclear Information System (INIS)

Kralovec, J.

1997-01-01

Integral water-cooled reactors are typical with eliminating large-diameter primary pipes and placing primary components, i.e. steam generators and pressurizers in reactor vessels. This arrangement leads to reactor pressure vessels of large dimensions: diameters, heights and thick walls and subsequently to great weights. Thus, even medium power units have pressure vessels which are on the very limit of present manufacturing capabilities. Principal manufacturing and inspection operations as well as pertinent equipment are concerned: welding, cladding, heat treatment, machining, shop-handling, non-destructive testing, hydraulic pressure tests etc. Tile transport of such a large and heavy component makes a problem which effects its design as well as the selection of the plant site. Railway, road and ship are possible ways of transport each of them having its advantages and limitations. Specific features and limits of the manufacture and transport of large pressure vessels are discussed in the paper. (author)

Collaborative consumption: relationship between trust and cooperation

Directory of Open Access Journals (Sweden)

Uiara Gonçalves De Menezes

2015-08-01

Full Text Available Given the growing concern about impacts caused by high consumption patterns, this paper seeks to analyze a different way to access goods and services through collaboration, without the ownership of a good. Several initiatives of collaborative consumption have won fans in the world and also in Brazil, but little is known about these arrangements. By involving groups of people, aspects related to trust and cooperation are considered relevant to the operation of collaborative consumption. These two aspects were analyzed in eight different initiatives of collaborative consumption, through interviews with eight respective users. The result that emerges from this analysis is that not all initiatives are based on trust, although there is collaboration to achieve the intended goals. The types of initiatives that had greater emphasis on trust, for treating it so indispensable, were couchsurfing, coworking, crowdsourcing and library at bus stops. These forms of consumption, trust is the basis for cooperation, because without it individuals would be unable to achieve the desired result. Other results and specifics are presented in the article.

Cooperative effects in (ethanol)3-water heterotetramers

International Nuclear Information System (INIS)

Mejia, Sol; Espinal, Juan F; Mondragon, Fanor

2009-01-01

Density Functional Theory (DFT: B3LYP/6-31 + G(d)) was used for the optimization of clusters on the potential energy surface of (ethanol)3-water heterotetramers. The tetramerization energies can reach values up to -21.00 kcal/ mol. This energy can not be obtained by just considering the contributions from interactions between two cluster molecules, which suggests of the presence of global cooperative effects (positive). These effects are reflected in smaller hydrogen bond distances and smaller oxygen-oxygen distances, as well as in greater elongations of the O-H proton donor bond with a stronger red-shift in the heterotetramers compared to the ethanol-water heterodimers and the ethanol dimer. The largest cooperativity effect was observed in the four hydrogen bonds arranged in the largest possible cyclic geometric pattern, where all the molecules act as proton acceptor and donor simultaneously. A similar analysis to the characterization of (ethanol)3-water heterotetramers was carried out on (methanol)3-water heterotetramers, and ethanol and methanol tetramers, whose comparison showed a great similarity between all evaluated parameters for the clusters with equal geometric pattern.

The High-Technology Connection: Academic/Industrial Cooperation for Economic Growth. ASHE-ERIC Higher Education Research Report No. 6.

Science.gov (United States)

Johnson, Lynn G.

Cooperative arrangements between academic institutions and industry are examined, with attention to linkages in high technology research and development (R&D), the commercial application of R&D (technology transfer), and the preparation and continuing development of scientific and engineering personnel. Incentives and barriers to campus/corporate…

Promoting regional energy co-operation in South Asia

International Nuclear Information System (INIS)

Srivastava, Leena; Misra, Neha

2007-01-01

Energy is a key ingredient of the socio-economic development of any region. South Asia is not only one of the fastest growing regions in the world; it is also one of the poorest, which thus puts energy at the very heart of the development process in the region. This paper looks at the challenges faced by the South Asia sub-region for economic co-operation (SASEC) comprised of Bangladesh, Bhutan, India and Nepal, and also at the role of greater regional energy co-operation therein. The region is characterized by pressures of growing economies and increasing population. While the per capita energy consumption is one of the lowest in the world, energy intensity continues to be very high. A large portion of the population lacks access to modern sources of energy and depends on traditional sources that are not only inefficient but also have severe health and environmental problems associated with them. Increasing oil import dependency and huge investment needs for energy market development pose a further challenge. The region has a good resource potential and tremendous scope for energy co-operation, which can play a key role in addressing many of these energy security concerns and in putting it on the path of sustainable development. It is ironic that the record in the area has been so limited and that too in the most basic form of co-operation, i.e. bilateral arrangements between countries. This paper puts forth a multi-pronged strategy for sub-regional energy co-operation encompassing softer options aimed at confidence building to more substantial and larger scale co-operation efforts. Delays in decision making to ensure stronger and mutually beneficial co-operation efforts are associated with high costs not only to the energy sector but also for the entire development agenda. With the precarious energy situation in the region and unprecedented increases in international oil prices seen in recent times, it is high time for policy makers, financing institutions, NGOs

Design and Manufacture of a Novel LED Table Lamp with Flower Decoration

Directory of Open Access Journals (Sweden)

Tzer-Ming Jeng

2014-08-01

Full Text Available This work involved the design and manufacture of a novel LED table lamp that provides for flower decoration. It is a combination of a normal LED table lamp and attachments holding flower arrangement frogs. In this application the frogs, as used for traditional flower arrangements, became heat sinks for the LED units. They are made of an aluminum alloy to give good heat transfer and dissipation. In any case since they are fixed to the unit they do not need to be very heavy. The design features of this novel flower-arrangement LED table lamp are: (1 the use of a light aluminum alloy flower decoration frog as a heat sink which gives both high heat dissipation and allows decorative flower arrangement; (2 the installation of LED lamps at three points of the same plate above a cylinder covered with a glass lampshade to achieve a beautiful effect; (3 to provide three different lighting modes for reading, use as a night light and for flower decoration. This novel LED table lamp meets all the energy-saving and environmental protection requirements. It has commercial potential in the market for LED lamps.

When your contract manufacturer becomes your competitor.

Science.gov (United States)

Arruñda, Benito; Vázquez, Xosé H

2006-09-01

PC maker Lenovo started out as a distributor of equipment made by IBM and other companies; now it has formed a joint venture with IBM and will eventually affix its own logo to its computers. Shanghai Automotive Industry Corporation (SAIC) started out manufacturing vehicles for Volkswagen and GM; now it's preparing to sell its own cars in China, Europe, and North America. Lenovo and SAIC represent a host of formerly anonymous makers of brand-name products that are breaking out of their defined roles and pushing the brands themselves aside. In this article, the authors explore the double-edged relationships original equipment manufacturers (OEMs) forge with their contract manufacturers (CMs). On the one hand, an OEM can reduce its labor costs, free up capital, and improve worker productivity by outsourcing all the manufacturing of a product. The company can then concentrate on value-adding activities--research and development, product design, and marketing, for instance. On the other hand, an OEM that retains a contract manufacturer may find itself immersed in a melodrama replete with promiscuity (the ambitious CM pursues liaisons with other OEMs), infidelity (the OEM's retailers and distributors shift their business to the upstart CM), and betrayal (the brazen CM transmits the OEM's intellectual property to the OEM's rivals or keeps it for itself when the contract is up). OEMs cannot simply terminate their outsourcing arrangements--they need contract manufacturers in order to keep specializing, adding value, and staying competitive. But OEMs can manage these relationships so that they don't become weak or the CMs too strong. Doing so requires modesty about revealing trade secrets; caution about whom one consorts with; and a judicious degree of intimacy, loyalty, and generosity toward partners and customers.

Energy options and regional cooperation on nuclear energy in the Asia-Pacific region

International Nuclear Information System (INIS)

Shin, Jae In

1986-10-01

This paper reviews the extensive forms of Asia-Pacific regional cooperation in nuclear power to develop and provide economical and reliable energy supply for sound economical growths of developing countries in this region, which has seen rapid growth of energy consumption more than anywhere else in recent years. Nuclear power has received keen attention from DCs because it can provide a self-reliable energy supply and promote development of high technology in the associated engineering and manufacturing industries locally. However, due to the particular characteristics in nuclear power technology, a close cooperation is required between the seller(industrialized) and buyer(developing) countries. The Asia-Pacific regional cooperation in nuclear power is a step toward providing mutual benefits to the countries involved in this region, and this paper explores potential ways in formulating basic and systematic approaches and areas of full scope cooperation. (author)

46 CFR 180.150 - Survival craft embarkation arrangements.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft embarkation arrangements. 180.150 Section... (UNDER 100 GROSS TONS) LIFESAVING EQUIPMENT AND ARRANGEMENTS Survival Craft Arrangements and Equipment § 180.150 Survival craft embarkation arrangements. (a) A launching appliance approved under approval...

Flexible Working Time Arrangements in Bulgaria

OpenAIRE

Beleva, Iskra

2009-01-01

The objective of this paper is to analyze the flexible working time arrangements in Bulgaria, using a life-course perspective. Two important features have to be outlined, namely: underdeveloped flexible forms of employment in the country, including working time arrangement, and lack of previous analysis on flexible working time arrangements from the angle of life-course perspective. The author describes the regulatory framework, collective agreements at national and company level as a frame w...

48 CFR 28.304 - Risk-pooling arrangements.

Science.gov (United States)

2010-10-01

... CONTRACTING REQUIREMENTS BONDS AND INSURANCE Insurance 28.304 Risk-pooling arrangements. Agencies may establish risk-pooling arrangements. These arrangements are designed to use the services of the insurance industry for safety engineering and the handling of claims at minimum cost to the Government. The agency...

System aspects of managing international scientific and technical as well as manufacturing economic cooperation in the nuclear power field

International Nuclear Information System (INIS)

Drahny, M.

1988-01-01

International scientific and technical cooperation in nuclear power is discussed from the angle of systems control aspects. Integration benefit and the development stages of the integration process are mainly treated. The researcher-user relations are analysed in detail in scientific and technical cooperation and its links to economic cooperation. In nuclear power within COMECON countries, the most important field of cooperation currently is the complex program of scientific and technical progress of the COMECON member countries till the year 2000, especially its third priority trend called Accelerated Development of Nuclear Power. The following new quality should be thereby provided for the participating states: the achievement of the world peak standards of technical and economic parameters; the reflection of scientific and technical and economic cooperation in a complete innovatory cycle Science-Technology-Production-Application; the achievement of direct labor relations of the participating research, development, production and end user organizations. (Z.M.). 1 fig., 16 refs

A Note on the Core of TU-cooperative Games with Multiple Membership Externalities

Directory of Open Access Journals (Sweden)

Heinrich H. Nax

2014-10-01

Full Text Available A generalization of transferable utility cooperative games from the functional forms introduced by von Neumann and Morgenstern (1944, Theory of Games and Economic Behavior and Lucas and Thrall (1963, Naval Research Logistics Quarterly, 10, 281–298 is proposed to allow for multiple membership. The definition of the core is adapted analogously and the possibilities for the cross-cutting of contractual arrangements are illustrated and discussed.

Self-organized control in cooperative robots using a pattern formation principle

International Nuclear Information System (INIS)

Starke, Jens; Ellsaesser, Carmen; Fukuda, Toshio

2011-01-01

Self-organized modular approaches proved in nature to be robust and optimal and are a promising strategy to control future concepts of flexible and modular manufacturing processes. We show how this can be applied to a model of flexible manufacturing based on time-dependent robot-target assignment problems where robot teams have to serve manufacturing targets such that an objective function is optimized. Feasibility of the self-organized solutions can be guaranteed even for unpredictable situations like sudden changes in the demands or breakdowns of robots. As example an uncrewed space mission is visualized in a simulation where robots build a space station. - Highlights: → Adapting a pattern formation principle to control cooperative robots in a robust way. → Flexible manufacturing systems are modelled by time-dependent assignment problems. → Coupled selection equations guarantee feasibility of solutions. → Solution structure (permutations) is not destroyed by inhomogeneous growth rates. → Example of an uncrewed space mission shows effectivity and robustness.

Sealing arrangement for radioactive material

International Nuclear Information System (INIS)

Gray, I.L.S.; Sievwright, R.W.T.; Elliott, J.C.

1993-01-01

A sealing arrangement for hermetically sealing two mating surfaces comprises two seals arranged to lie between the surfaces. Each seal provides hermetic sealing over a respective different temperature range and lie serially along the surfaces between the regions to be isolated. A main seal integrity test arrangement is provided in the form of a port and passage. This allows for the introduction of a fluid into or the evacuation of a region between the two seals to detect a leak. The port is also provided with at least two test port seals which seal with a plug. The plug is also provided with a test port to allow the integrity of the test port seal to be tested. (UK)

International Cooperation of the Republic of Croatia in the Field of Nuclear Safety

International Nuclear Information System (INIS)

Novosel, N.; Rosandic, L.

2010-01-01

International cooperation of the Republic of Croatia in the field of nuclear safety can be divided in two parts - political part, for which the Ministry of Foreign Affairs and European Integration is responsible, and technical part, for which the State Office for Nuclear Safety is responsible, in cooperation with other state administration bodies, where applicable. According to the Nuclear Safety Act (OG 73/2003) the State Office for Nuclear Safety: 'coordinates technical cooperation with the International Atomic Energy Agency for all participants from the Republic of Croatia'; 'fulfills the obligations which the Republic of Croatia has assumed through international conventions and bilateral agreements concerning nuclear safety and the application of protective measures aimed at the non-proliferation of nuclear weapons' and 'cooperates with international organizations and associations in the area of nuclear safety, and appoints its own expert representatives to take part in the work of such organizations and associations or to monitor their work'. In this paper various aspects of the technical cooperation with the International Atomic Energy Agency, as well as international conventions and bilateral agreements in the field of nuclear safety, will be presented. Also, cooperation with other international organizations and associations in the nuclear area, such as Nuclear Suppliers Group, Zangger Committee, Wassenaar Arrangement, Comprehensive Nuclear-Test-Ban Treaty Organization, Euratom and certain civil expert groups of NATO, will be described.(author).

Classic romance in electronic arrangement

Directory of Open Access Journals (Sweden)

Kizin M.M.

2017-03-01

Full Text Available this article analyses the transformation of the performing arts of classical romance in the terms of electronic sound and performance via electronic sounds arrangements. The author focuses on the problem of synthesis of electronic sound arrangements and classical romance, offering to acquire the skills of the creative process in constantly changing conditions of live performances.

Strategic research on the sustainable development cost of manufacturing industry under the background of carbon allowance and trade policy

Science.gov (United States)

Ma, Zhongmin; Cheng, Mengting; Wang, Mei

2017-08-01

The important subjects of energy consumption and carbon emission are manufacturing enterprises, with the deepening of international cooperation, and the implementation of carbon limit and trade policy, costs of manufacturing industry will rise sharply. How can the manufacturing industry survive in this reform, and it has to be a problem that the managers of the manufacturing industry need to solve. This paper analyses sustainable development cost connotation and value basis on the basis of sustainable development concept, discusses the influence of carbon allowance and trade policy for cost strategy of manufacturing industry, thinks that manufacturing industry should highlight social responsibility and realize maximization of social value, implement cost strategy the sustainable development, and pointed out the implementation way.

22 CFR 92.63 - Arrangement of papers.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Arrangement of papers. 92.63 Section 92.63... and Letters Rogatory § 92.63 Arrangement of papers. Unless special instructions to the contrary are received, the various papers comprising the completed record of the depositions should usually be arranged...

Exploring the impact of Lean manufacturing on flexibility in SMEs

Energy Technology Data Exchange (ETDEWEB)

Lucherini, Franco; Rapaccini, Mario

2017-07-01

This paper describes the use of simulation and case-study research to assess flexibility gains induced by the adoption of three Lean Manufacturing practices. Design/methodology/approach: We gather useful material and information about the manufacturing process of a selected Small-Medium Enterprise by adopting a case-research approach. The Value Stream Mapping is the method used for visualizing flows of products and information along the production system. Starting from the current arrangement of the company, computer simulation is used to assess the benefits arising from Cellular Manufacturing, Just-in-Time Delivery by Suppliers, and Single Minute Exchange of Dies. Findings: To investigate the flexibility improvements coming from the introduction of Lean Manufacturing, we present a simulation model of the described company on which we performed our analysis. We quantify the flexibility of different configurations according to the new 5-step approach in order to segregate the contribution of different lean techniques. Originality/value: We extend the combined use of Case Research and Computer Simulation to the research on Manufacturing Flexibility within Small-Medium Enterprises. We enhance the knowledge on this under investigated context collecting quantitative field data. Moreover, building on the factorial Design of Experiment, we introduce a new 5-step method to appraise the cost benefit ratio of lean techniques for flexibility. The managerial implication of this research is mostly related to the provision of a supporting method for the decision making process propaedeutic to Lean Manufacturing introduction.

Exploring the impact of Lean manufacturing on flexibility in SMEs

Directory of Open Access Journals (Sweden)

Franco Lucherini

2017-11-01

Full Text Available Purpose: This paper describes the use of simulation and case-study research to assess flexibility gains induced by the adoption of three Lean Manufacturing practices. Design/methodology/approach: We gather useful material and information about the manufacturing process of a selected Small-Medium Enterprise by adopting a case-research approach. The Value Stream Mapping is the method used for visualizing flows of products and information along the production system. Starting from the current arrangement of the company, computer simulation is used to assess the benefits arising from Cellular Manufacturing, Just-in-Time Delivery by Suppliers, and Single Minute Exchange of Dies. Findings: To investigate the flexibility improvements coming from the introduction of Lean Manufacturing, we present a simulation model of the described company on which we performed our analysis. We quantify the flexibility of different configurations according to the new 5-step approach in order to segregate the contribution of different lean techniques. Originality/value: We extend the combined use of Case Research and Computer Simulation to the research on Manufacturing Flexibility within Small-Medium Enterprises. We enhance the knowledge on this under investigated context collecting quantitative field data. Moreover, building on the factorial Design of Experiment, we introduce a new 5-step method to appraise the cost benefit ratio of lean techniques for flexibility. The managerial implication of this research is mostly related to the provision of a supporting method for the decision making process propaedeutic to Lean Manufacturing introduction.

Exploring the impact of Lean manufacturing on flexibility in SMEs

International Nuclear Information System (INIS)

Lucherini, Franco; Rapaccini, Mario

2017-01-01

This paper describes the use of simulation and case-study research to assess flexibility gains induced by the adoption of three Lean Manufacturing practices. Design/methodology/approach: We gather useful material and information about the manufacturing process of a selected Small-Medium Enterprise by adopting a case-research approach. The Value Stream Mapping is the method used for visualizing flows of products and information along the production system. Starting from the current arrangement of the company, computer simulation is used to assess the benefits arising from Cellular Manufacturing, Just-in-Time Delivery by Suppliers, and Single Minute Exchange of Dies. Findings: To investigate the flexibility improvements coming from the introduction of Lean Manufacturing, we present a simulation model of the described company on which we performed our analysis. We quantify the flexibility of different configurations according to the new 5-step approach in order to segregate the contribution of different lean techniques. Originality/value: We extend the combined use of Case Research and Computer Simulation to the research on Manufacturing Flexibility within Small-Medium Enterprises. We enhance the knowledge on this under investigated context collecting quantitative field data. Moreover, building on the factorial Design of Experiment, we introduce a new 5-step method to appraise the cost benefit ratio of lean techniques for flexibility. The managerial implication of this research is mostly related to the provision of a supporting method for the decision making process propaedeutic to Lean Manufacturing introduction.

The Industrial Vocational High School Teacher Training Program Cooperating with the Enterprises.

Science.gov (United States)

Chi, Cheng-Feng

Training of vocational education teachers should be closely linked to the industries in which the teachers are preparing to instruct students. A teacher training program in Taiwan has been designed with the cooperation of the metals manufacturing industry. In this four-year program, students are assigned to the industry to learn the product…

Renewable energy and Scottish trading arrangements

International Nuclear Information System (INIS)

2001-01-01

This report summarises the findings of a project involving the participation of the Scottish Renewables Forum (SRF) in the ongoing Ofgem consultation process concerning the future electricity trading arrangements in Scotland. The present administrative arrangements, the activities of the SRF, the prospects for the British Electricity Trading and Transmission Arrangements (BETTA), generator connection policy, and transmission access are discussed, and an overview of consultations relating to Scotland-England interconnection access is presented. The appendices cover the SRF responses to the Ofgem consultation, a discussion paper in advance of the SRF meeting with Ofgem in April 2001, an SRF trading update, the SRF's responses to Ofgem's Environmental Action Plan, the Scottish Embedded Generators Working Group's terms of reference and draft paper on issues, and a briefing on prices in administered arrangements

Peak load arrangements : Assessment of Nordel guidelines

Energy Technology Data Exchange (ETDEWEB)

2009-07-01

Two Nordic countries, Sweden and Finland, have legislation that empowers the TSO to acquire designated peak load resources to mitigate the risk for shortage situations during the winter. In Denmark, the system operator procures resources to maintain a satisfactory level of security of supply. In Norway the TSO has set up a Regulation Power Option Market (RKOM) to secure a satisfactory level of operational reserves at all times, also in winter with high load demand. Only the arrangements in Finland and Sweden fall under the heading of Peak Load Arrangements defined in Nordel Guidelines. NordREG has been invited by the Electricity Market Group (EMG) to evaluate Nordel's proposal for 'Guidelines for transitional Peak Load Arrangements'. The EMG has also financed a study made by EC Group to support NordREG in the evaluation of the proposal. The study has been taken into account in NordREG's evaluation. In parallel to the EMG task, the Swedish regulator, the Energy Markets Inspectorate, has been given the task by the Swedish government to investigate a long term solution of the peak load issue. The Swedish and Finnish TSOs have together with Nord Pool Spot worked on finding a harmonized solution for activation of the peak load reserves in the market. An agreement accepted by the relevant authorities was reached in early January 2009, and the arrangement has been implemented since 19th January 2009. NordREG views that the proposed Nordel guidelines have served as a starting point for the presently agreed procedure. However, NordREG does not see any need to further develop the Nordel guidelines for peak load arrangements. NordREG agrees with Nordel that the market should be designed to solve peak load problems through proper incentives to market players. NordREG presumes that the relevant authorities in each country will take decisions on the need for any peak load arrangement to ensure security of supply. NordREG proposes that such decisions should be

Seal arrangement

International Nuclear Information System (INIS)

Dempsey, J.D.

1978-01-01

A hydraulically balanced face type shaft seal is provided in which the opening and closing seal face areas retain concentricity with each other in the event of lateral shaft displacement. The seal arrangement is for a vertical high pressure pump, indented for use in the cooling system of a nuclear reactor. (Auth.)

Nuclear reactor internals arrangement

International Nuclear Information System (INIS)

Frisch, E.; Andrews, H.N.

1976-01-01

A nuclear reactor internals arrangement is disclosed which facilitates reactor refueling. A reactor vessel and a nuclear core is utilized in conjunction with an upper core support arrangement having means for storing withdrawn control rods therein. The upper core support is mounted to the underside of the reactor vessel closure head so that upon withdrawal of the control rods into the upper core support, the closure head, the upper core support and the control rods are removed as a single unit thereby directly exposing the core for purposes of refueling

IAEA paper on institutional arrangements

International Nuclear Information System (INIS)

1979-01-01

At its fifth series of meetings, Working Group 3 received a background paper prepared by the IAEA which had a threefold purpose: firstly, to provide an overview on institutional arrangements under consideration by the INFCE Working Groups; secondly, to explore potential relationships between the various institutional arrangements under consideration; and thirdly, to identify areas where further analysis might be desirable

Report on the fiscal 1996 research cooperation promotion project, `the research cooperation diagnosis survey`; 1996 nendo kenkyu kyoryoku jigyo `kenkyu kyoryoku shindan chosa` hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

A diagnosis survey was conducted for Japan to cooperate in researching subjects on technical development in developing countries. In fiscal 1996, surveys were made on the following: (1) establishment of the industrial base (Vietnam), (2) preservation of biological diversification and the continuous utilization (Brazil), (3) fostering of the industry of automobile parts (Thailand), (4) finding out of items on environment related fields (India), (5) environmental response type system for effective use of water resource (the Philippines), (6) small size geothermal exploration in remote islands (Indonesia). (1) is research cooperation for welding technology, powder metallurgy technology, hypoid gear manufacturing technology, and iron making technology by the direct reduction method. In (2), research/development are conducted in cooperation with research institutes in Brazil on survey/identification/utilization of bioactive substances from biological resources in Brazil. In (4), an examination was made of the seeds for research cooperation in technical fields such as environment and energy. Having a strong relation with the industrial circle, SCIR is carrying out researches on aerospace, petrochemical, biology, electronics, medicines/drug, etc., which indicated fulfillment of intellectual infrastructure in India. 52 figs.

On the future of safety in the manufacturing industry

OpenAIRE

Reniers, G.

2017-01-01

Abstract: This paper argues that a new paradigm is needed in the manufacturing industry to further substantially advance safety as part of the industry 4.0 concept. The different domains that need to be focused upon are Cluster-thinking and cooperation, High transparency and efficient inspections, Education and training, Security integration, and Safety innovation. Since society has fundamentally changed over the last two decades, revolutionizing safety via these domains is truly needed in th...

A Model for Cooperative Advertising and Pricing Decisions in Manufacturer-Retailer Supply Chain with Discount: A Game Theory Approach

OpenAIRE

Abolfazl Kazemi; Zohreh SaeedMohammadi

2016-01-01

Coordinating the supply chain is among the most important subjects that is extensively addressed in the related literature. If a supply chain is to be coordinated, it is equivalent to say that we must solve a problem related to competition and cooperation. The game theory is obviously one of the most effective methods to solve such problems, in which the players of the supply chain are assumed to engage in cooperative and non-cooperative games. The current study aims to coordinate a two-level...

Social penalty promotes cooperation in a cooperative society.

Science.gov (United States)

Ito, Hiromu; Yoshimura, Jin

2015-08-04

Why cooperation is well developed in human society is an unsolved question in biological and human sciences. Vast studies in game theory have revealed that in non-cooperative games selfish behavior generally dominates over cooperation and cooperation can be evolved only under very limited conditions. These studies ask the origin of cooperation; whether cooperation can evolve in a group of selfish individuals. In this paper, instead of asking the origin of cooperation, we consider the enhancement of cooperation in a small already cooperative society. We ask whether cooperative behavior is further promoted in a small cooperative society in which social penalty is devised. We analyze hawk-dove game and prisoner's dilemma introducing social penalty. We then expand it for non-cooperative games in general. The results indicate that cooperation is universally favored if penalty is further imposed. We discuss the current result in terms of the moral, laws, rules and regulations in a society, e.g., criminology and traffic violation.

NASA's National Center for Advanced Manufacturing

Science.gov (United States)

Vickers, John

2003-01-01

NASA has designated the Principal Center Assignment to the Marshall Space Flight Center (MSFC) for implementation of the National Center for Advanced Manufacturing (NCAM). NCAM is NASA s leading resource for the aerospace manufacturing research, development, and innovation needs that are critical to the goals of the Agency. Through this initiative NCAM s people work together with government, industry, and academia to ensure the technology base and national infrastructure are available to develop innovative manufacturing technologies with broad application to NASA Enterprise programs, and U.S. industry. Educational enhancements are ever-present within the NCAM focus to promote research, to inspire participation and to support education and training in manufacturing. Many important accomplishments took place during 2002. Through NCAM, NASA was among five federal agencies involved in manufacturing research and development (R&D) to launch a major effort to exchange information and cooperate directly to enhance the payoffs from federal investments. The Government Agencies Technology Exchange in Manufacturing (GATE-M) is the only active effort to specifically and comprehensively address manufacturing R&D across the federal government. Participating agencies include the departments of Commerce (represented by the National Institute of Standards and Technology), Defense, and Energy, as well as the National Science Foundation and NASA. MSFC s ongoing partnership with the State of Louisiana, the University of New Orleans, and Lockheed Martin Corporation at the Michoud Assembly Facility (MAF) progressed significantly. Major capital investments were initiated for world-class equipment additions including a universal friction stir welding system, composite fiber placement machine, five-axis machining center, and ten-axis laser ultrasonic nondestructive test system. The NCAM consortium of five universities led by University of New Orleans with Mississippi State University

Performance-Based Risk-Sharing Arrangements: U.S. Payer Experience.

Science.gov (United States)

Goble, Joseph A; Ung, Brian; van Boemmel-Wegmann, Sascha; Navarro, Robert P; Parece, Andrew

2017-10-01

As a result of global concern about rising drug costs, many U.S. payers and European agencies such as the National Health Service have partnered with pharmaceutical companies in performance-based risk-sharing arrangements (PBRSAs) by which manufacturers share financial risk with health care purchasing entities and authorities. However, PBRSAs present many administrative and legal challenges that have minimized successful contract experiences in the United States. To (a) identify drug and disease characteristics and contract components that contribute to successful PBRSA experiences and the primary barriers to PBRSA execution and (b) explore solutions to facilitate contract negotiation and execution. A 37-item, web-based survey instrument (Qualtrics), approximately 20 minutes in duration, was open during July and August 2016. The survey was emailed to 90 pharmacy and medical directors of various health care organizations. Statistical analysis included the Kruskal-Wallis test and chi-square tests to examine differences among payer responses. Survey responses were anonymized and data were aggregated. Twenty-seven individuals completed the survey (30% completion rate). The majority of respondents worked for regional health plans (52%, n = 14), covering at least 1 million lives (63%, n = 17), with at least 7 years of managed care experience (81%, n = 22). A total of 51 PBRSAs were active among respondents at the time of the survey. Easily obtainable and evaluable drug data and medical data were the most important drug and disease attributes for successful PBRSAs, respectively. Pharmacy claims and patient demographic data were assessed as "very easy and inexpensive" to collect. Type and amount of manufacturer payment for drug outcome performance failure, endpoint measurement, and necessary clinical data for drug performance measurement were all critical factors for successful PBRSAs. Standardized contract templates and transparent contract financial risk evaluation and

Framework and Challenges for Initiating Multinational Cooperation for the Development of a Radioactive Waste Repository

International Nuclear Information System (INIS)

2016-01-01

This publication is concerned with radioactive waste that requires geological disposal. It discusses the partnership arrangements necessary for the development of a multinational repository for disposal of this waste, but it also emphasizes that countries should not rely solely on a multinational solution and should in addition have coherent national plans for disposal (a dual track strategy). The publication focuses on multinational approaches based on the IAEA scenario for cooperation among countries in joint projects for the establishment of a shared geological repository. It describes the phased approach that would be needed, indicating the decision processes to be undertaken by partners in the multinational project, both within a national context and in the scope of the joint endeavour. It highlights a wide range of legal and institutional aspects, including the contractual obligations among partners, the economic and financial arrangements, liabilities, nuclear security, regulatory and legislative aspects, waste transportation arrangements, and social issues. It also addresses the uncertainties and risks involved in the implementation of a multinational repository

Out-of-Autoclave Manufacturing of Aerospace Representative Parts

Science.gov (United States)

Cauberghs, Julien

The use of carbon fibre reinforced composites for aerospace structures has seen a high increase in recent years, and is still growing. The high stiffness-to-weight ratio of these materials makes them ideal for primary structures on airplanes, satellites, and spacecrafts. Nevertheless, the manufacturing of composites remains very costly since it requires equipment investment such as an autoclave, and very qualified workers. Out-of-autoclave manufacturing technology is very promising since it only requires a traditional oven, while still aiming at similar part quality. However, the absence of positive pressure compared with an autoclave makes it more difficult to achieve low porosity parts. This research investigates the manufacturing of complex features with out-of autoclave prepreg technology. The features studied are tight-radius corners with a curvature change, and ply drop-offs. Ply drop-offs tests were conducted to identify if porosity is higher at ply terminations. In corners, the bagging arrangement was modified to achieve the most uniform thickness in areas of curvature change, even with small radii. The conclusions from these studies provided us with guidelines to manufacture larger representative parts, which included these features. The representative parts were tested for porosity, thickness uniformity, mechanical performance, and glass transition temperature (Tg). A total of four representative parts were manufactured with out-of-autoclave technology, and one more was manufactured with an autoclave to allow for a proper comparison between the two processes. The materials used were MTM45-1 5 harness satin and CYCOM5320 plain weave for the out-of-autoclave parts, and CYCOM5276-1 plain weave for the autoclave part. The effect of ply drop-offs on porosity was found to be negligible. Thickness deviation in corners was attributed to a combination of consumable bridging, prepreg's bulk factor and inter-ply shear. Overall, out-of-autoclave prepregs showed

Living arrangements and mental health in Finland

Science.gov (United States)

Joutsenniemi, Kaisla; Martelin, Tuija; Martikainen, Pekka; Pirkola, Sami; Koskinen, Seppo

2006-01-01

Background Non‐married persons are known to have poor mental health compared with married persons. Health differences between marital status groups may largely arise from corresponding differences in interpersonal social bonds. However, official marital status mirrors the social reality of persons to a decreasing extent, and living arrangements may be a better measure of social bonds. Little is known about mental health in different living arrangement groups. This study aims to establish the extent and determinants of mental health differences by living arrangement in terms of psychological distress (GHQ) and DSM‐IV psychiatric disorders (CIDI). Methods Data were used from the nationally representative cross sectional health 2000 survey, conducted in 2000–1 in Finland. Altogether 4685 participants (80%) aged 30–64 years were included in these analyses; comprehensive information was available on measures of mental health and living arrangements. Living arrangements were measured as follows: married, cohabiting, living with other(s) than a partner, and living alone. Results Compared with the married, persons living alone and those living with other(s) than a partner were approximately twice as likely to have anxiety or depressive disorders. Cohabiters did not differ from the married. In men, psychological distress was similarly associated with living arrangements. Unemployment, lack of social support, and alcohol consumption attenuated the excess psychological distress and psychiatric morbidity of persons living alone and of those living with other(s) than a partner by about 10%–50% each. Conclusions Living arrangements are strongly associated with mental health, particularly among men. Information on living arrangements, social support, unemployment, and alcohol use may facilitate early stage recognition of poor mental health in primary health care. PMID:16698975

Modelling of cooperating robotized systems with the use of object-based approach

Science.gov (United States)

Foit, K.; Gwiazda, A.; Banas, W.; Sekala, A.; Hryniewicz, P.

2015-11-01

Today's robotized manufacturing systems are characterized by high efficiency. The emphasis is placed mainly on the simultaneous work of machines. It could manifest in many ways, where the most spectacular one is the cooperation of several robots, during work on the same detail. What's more, recently a dual-arm robots are used that could mimic the manipulative skills of human hands. As a result, it is often hard to deal with the situation, when it is necessary not only to maintain sufficient precision, but also the coordination and proper sequence of movements of individual robots’ arms. The successful completion of this task depends on the individual robot control systems and their respective programmed, but also on the well-functioning communication between robot controllers. A major problem in case of cooperating robots is the possibility of collision between particular links of robots’ kinematic chains. This is not a simple case, because the manufacturers of robotic systems do not disclose the details of the control algorithms, then it is hard to determine such situation. Another problem with cooperation of robots is how to inform the other units about start or completion of part of the task, so that other robots can take further actions. This paper focuses on communication between cooperating robotic units, assuming that every robot is represented by object-based model. This problem requires developing a form of communication protocol that the objects can use for collecting the information about its environment. The approach presented in the paper is not limited to the robots and could be used in a wider range, for example during modelling of the complete workcell or production line.

Best Manufacturing Practices: Report of Survey Conducted at Headquarters, U.S. Army Industrial Operations Command, ROck Island, IL

National Research Council Canada - National Science Library

Renner, Ernie

1997-01-01

This report was produced by the Best Manufacturing Practices (BMP) program, a unique industry and government cooperative technology transfer effort that improves the competitiveness of America's industrial base both here and abroad...

International pollution control: Cooperative versus noncooperative strategies

International Nuclear Information System (INIS)

Dockner, E.J.; Van Long, N.

1993-01-01

International pollution control involving two neighboring countries is modeled as a simple two-player dynamic game. Each country produces a good that is consumed by domestic households. Production of each consumption good results in emissions of pollutants. Households in each country derive utility from the consumption of the domestically produced good but incur costs through the total stock of pollution (stock externality). In this setting we characterize cooperative as well as noncooperative pollution control strategies of the governments of the two countries that maximize the discounted stream of net benefits of a representative consumer. It turns out that when the governments are restricted to use linear strategies noncooperative behavior results in overall losses for both countries. If, on the contrary, governments use nonlinear Markov-perfect strategies and the discount rate is small enough a Pareto-efficient steady-state pollution stock can be supported as a differentiable subgame-perfect equilibrium. Thus, the emergence of first-best solutions (cooperative outcomes) does not require any institutional arrangements (threats, retaliation, etc.) but can be brought about through the use of nonlinear Markov-perfect equilibrium strategies. 20 refs., 1 tab

The Politics of Legal Arrangements

DEFF Research Database (Denmark)

Leander, Anna

2018-01-01

This article explores the place of formal legal arrangements in the politics surrounding the hybrid, enmeshed public-in-the-private forms of authority this special issue focuses on. It does so by analyzing the significance of one specific legal arrangement, the Duty of Care, for the politics...... and divisions currently organizing debates about the regulation of commercial security as well as about managerialism in international law more generally....

Contingent and Alternative Work Arrangements, Defined.

Science.gov (United States)

Polivka, Anne E.

1996-01-01

Discusses the definitions of contingent workers and alternative work arrangements used by the Bureau of Labor Statistics to analyze data, and presents aggregate estimates of the number of workers in each group. Discusses the overlap between contingent workers and workers in alternative arrangements. (Author/JOW)

Report on survey of international cooperation possibility on chemical CO2 fixation and utilization technology in FY 1997; 1997 nendo chosa hokokusho (kagakuteki CO2 koteika yuko riyo gijutsu ni kakawaru kokusai kyoryoku kanosei chosa)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

This survey focused on the end of the more promising companion and promoting the international cooperation on chemical CO2 fixation and utilization technology. As a result, the way of the carrying-forward of the international cooperation with more than one companion could be arranged beforehand. It led to getting an arrangement about a secrecy agreement respectively with Lurgi company and ABB company in Europe, and to providing a catalyst sample developed by RITE to implement an examination by the other party and to show related technical information. In addition, it concluded a cooperation agreement about a total system of the chemical CO2 fixation and utilization technology and methanol synthesis with ZSW. In Australia, negotiation about international cooperation with CSIRO which is a federal research organization and CRC (Cooperative Research Centre) for renewable energy has been started. The ideal circumstances are being ready for the chemical CO2 fixation project for which the international cooperation with the country where the natural energy is rich like Australia is essential when coming to practical use. To do alternating current with further high density in the following year it is desired to build a concrete study cooperation system. 1 fig., 4 tabs.

Methods for the evaluation of hospital cooperation activities (Systematic review protocol

Directory of Open Access Journals (Sweden)

Rotter Thomas

2012-02-01

Full Text Available Abstract Background Hospital partnerships, mergers and cooperatives are arrangements frequently seen as a means of improving health service delivery. Many of the assumptions used in planning hospital cooperatives are not stated clearly and are often based on limited or poor scientific evidence. Methods This is a protocol for a systematic review, following the Cochrane EPOC methodology. The review aims to document, catalogue and synthesize the existing literature on the reported methods for the evaluation of hospital cooperation activities as well as methods of hospital cooperation. We will search the Database of Abstracts of Reviews of Effectiveness, the Effective Practice and Organisation of Care Register, the Cochrane Central Register of Controlled Trials and bibliographic databases including PubMed (via NLM, Web of Science, NHS EED, Business Source Premier (via EBSCO and Global Health for publications that report on methods for evaluating hospital cooperatives, strategic partnerships, mergers, alliances, networks and related activities and methods used for such partnerships. The method proposed by the Cochrane EPOC group regarding randomized study designs, controlled clinical trials, controlled before and after studies, and interrupted time series will be followed. In addition, we will also include cohort, case-control studies, and relevant non-comparative publications such as case reports. We will categorize and analyze the review findings according to the study design employed, the study quality (low versus high quality studies and the method reported in the primary studies. We will present the results of studies in tabular form. Discussion Overall, the systematic review aims to identify, assess and synthesize the evidence to underpin hospital cooperation activities as defined in this protocol. As a result, the review will provide an evidence base for partnerships, alliances or other fields of cooperation in a hospital setting. PROSPERO

Manufacturing of individual biodegradable bone substitute implants using selective laser melting technique.

Science.gov (United States)

Lindner, Markus; Hoeges, Simon; Meiners, Wilhelm; Wissenbach, Konrad; Smeets, Ralf; Telle, Rainer; Poprawe, Reinhart; Fischer, Horst

2011-06-15

The additive manufacturing technique selective laser melting (SLM) has been successfully proved to be suitable for applications in implant manufacturing. SLM is well known for metal parts and offers direct manufacturing of three-dimensional (3D) parts with high bulk density on the base of individual 3D data, including computer tomography models of anatomical structures. Furthermore, an interconnecting porous structure with defined and reproducible pore size can be integrated during the design of the 3D virtual model of the implant. The objective of this study was to develop the SLM processes for a biodegradable composite material made of β-tricalcium phosphate (β-TCP) and poly(D, L)-lactide (PDLLA). The development of a powder composite material (β-TCP/PDLLA) suitable for the SLM process was successfully performed. The microstructure of the manufactured samples exhibit a homogeneous arrangement of ceramic and polymer. The four-point bending strength was up to 23 MPa. The X-ray diffraction (XRD) analysis of the samples confirmed β-TCP as the only present crystalline phase and the gel permeations chromatography (GPC) analysis documented a degradation of the polymer caused by the laser process less than conventional manufacturing processes. We conclude that SLM presents a new possibility to manufacture individual biodegradable implants made of β-TCP/PDLLA. Copyright © 2011 Wiley Periodicals, Inc.

46 CFR 195.06-1 - Lifesaving appliances and arrangements.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Lifesaving appliances and arrangements. 195.06-1 Section... VESSELS VESSEL CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Lifesaving Appliances and Arrangements § 195.06-1 Lifesaving appliances and arrangements. All lifesaving appliances and arrangements shall be...

Flood risk governance arrangements in Europe

Science.gov (United States)

Matczak, P.; Lewandowski, J.; Choryński, A.; Szwed, M.; Kundzewicz, Z. W.

2015-06-01

The STAR-FLOOD (Strengthening and Redesigning European Flood Risk Practices Towards Appropriate and Resilient Flood Risk Governance Arrangements) project, funded by the European Commission, investigates strategies for dealing with flood risk in six European countries: Belgium, the UK, France, the Netherlands, Poland and Sweden and in 18 vulnerable urban regions in these countries. The project aims to describe, analyse, explain, and evaluate the main similarities and differences between the selected EU Member States in terms of development and performance of flood risk governance arrangements. It also discusses the scientific and societal importance of these similarities and differences. Attention is paid to identification and characterization of shifts in flood risk governance arrangements and in flood risk management strategies and to determination of triggering factors and restraining factors. An assessment of a change of resilience and appropriateness (legitimacy, effectiveness, efficiency) of flood risk governance arrangements in Poland is presented and comparison with other European countries is offered.

Flood risk governance arrangements in Europe

Directory of Open Access Journals (Sweden)

P. Matczak

2015-06-01

Full Text Available The STAR-FLOOD (Strengthening and Redesigning European Flood Risk Practices Towards Appropriate and Resilient Flood Risk Governance Arrangements project, funded by the European Commission, investigates strategies for dealing with flood risk in six European countries: Belgium, the UK, France, the Netherlands, Poland and Sweden and in 18 vulnerable urban regions in these countries. The project aims to describe, analyse, explain, and evaluate the main similarities and differences between the selected EU Member States in terms of development and performance of flood risk governance arrangements. It also discusses the scientific and societal importance of these similarities and differences. Attention is paid to identification and characterization of shifts in flood risk governance arrangements and in flood risk management strategies and to determination of triggering factors and restraining factors. An assessment of a change of resilience and appropriateness (legitimacy, effectiveness, efficiency of flood risk governance arrangements in Poland is presented and comparison with other European countries is offered.

Entry into and Consequences of Nonstandard Work Arrangements.

Science.gov (United States)

Rothstein, Donna S.

1996-01-01

Explores the impact on workers of being in a nonstandard employment arrangement. Examines the distribution of workers among various arrangements and looks at aspects of work behavior and life events that may have influenced their working in a nonstandard arrangement. (Author/JOW)

Report for fiscal 1995 on simple operation type CAD/CAM system development through international cooperation. Cooperation for joint researches; 1995 nendo 'kan'i sosagata denshi sekkei seisan shien system no kaihatsu ni kansuru kenkyu kyoryoku' ni kansuru hokokusho. Kyodo kenkyu kyoryoku

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Reported herein are the joint research results of the project (manufacturing technology supported by advanced and integrated information system through international cooperation (MATIC)), implemented in China, Indonesia, Malaysia, Singapore and Thailand by Center of International Cooperation for Computerization, commissioned by NEDO. Japan invited researchers from each country to explain the research themes, and discussed construction of the systems in each country. Japanese experts visited the research institutes and cooperative works in these countries, to discuss the research cooperation themes, and survey the conditions and technical levels of these research institutes, and information infrastructures. The oversea researchers were invited to Japan for the MATIC international seminar, discussions for research cooperation themes, and MATIC cooperation promotion committee. Textile and apparel researchers were also invited from China. Japanese experts visited China, Indonesia, Malaysia, Singapore and Thailand for the on-the-spot surveys for each working group. (NEDO)

Determinants of flexible work arrangements

OpenAIRE

Sarbu, Miruna

2014-01-01

Flexible work arrangements such as allowing employees to work at home are used in firms, especially since information and communication technologies have become so widespread. Using individual-level data from 10,884 German employees, this paper analyses the determinants of working at home as a form of flexible work arrangements. The analysis is based on descriptive analyses and a discrete choice model using a probit estimation approach. The results reveal that men have a higher...

46 CFR 188.27-1 - Lifesaving appliances and arrangements.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Lifesaving appliances and arrangements. 188.27-1 Section... VESSELS GENERAL PROVISIONS Lifesaving Appliances and Arrangements § 188.27-1 Lifesaving appliances and arrangements. All lifesaving appliances and arrangements shall be in accordance with the requirements for...

46 CFR 90.27-1 - Lifesaving appliances and arrangements.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Lifesaving appliances and arrangements. 90.27-1 Section... VESSELS GENERAL PROVISIONS Lifesaving Appliances and Arrangements § 90.27-1 Lifesaving appliances and arrangements. All lifesaving appliances and arrangements must be in accordance with subchapter W (Lifesaving...

46 CFR 70.28-1 - Lifesaving appliances and arrangements.

Science.gov (United States)

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Lifesaving appliances and arrangements. 70.28-1 Section... PROVISIONS Lifesaving Appliances and Arrangements § 70.28-1 Lifesaving appliances and arrangements. All lifesaving appliances and arrangements on passenger vessels must be in accordance with subchapter W...

78 FR 40131 - Proposed Subsequent Arrangement

Science.gov (United States)

2013-07-03

... INFORMATION: This subsequent arrangement concerns the retransfer of 302,188 kg of U.S.-origin natural uranium..., Saskatchewan, Canada, to Springfields Fuels Ltd. in Lancashire, United Kingdom. The material, which is... arrangement concerning the retransfer of nuclear material of United States origin will not be inimical to the...

European top managers' support for work-life arrangements

NARCIS (Netherlands)

Been, W.M.|info:eu-repo/dai/nl/357424662

2015-01-01

In recent decades, work-life arrangements increasingly became an integral part of the organization of work. Arrangements such as telecommuting, flextime, part-time hours, and various types of leave arrangements are available to employees in many organizations. Top managers, such as CEOs, CFOs and

47 CFR 1.9020 - Spectrum manager leasing arrangements.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Spectrum manager leasing arrangements. 1.9020... Leasing General Policies and Procedures § 1.9020 Spectrum manager leasing arrangements. (a) Overview... may enter into a spectrum manager leasing arrangement, without the need for prior Commission approval...

Moran-evolution of cooperation: From well-mixed to heterogeneous complex networks

Science.gov (United States)

Sarkar, Bijan

2018-05-01

Configurational arrangement of network architecture and interaction character of individuals are two most influential factors on the mechanisms underlying the evolutionary outcome of cooperation, which is explained by the well-established framework of evolutionary game theory. In the current study, not only qualitatively but also quantitatively, we measure Moran-evolution of cooperation to support an analytical agreement based on the consequences of the replicator equation in a finite population. The validity of the measurement has been double-checked in the well-mixed network by the Langevin stochastic differential equation and the Gillespie-algorithmic version of Moran-evolution, while in a structured network, the measurement of accuracy is verified by the standard numerical simulation. Considering the Birth-Death and Death-Birth updating rules through diffusion of individuals, the investigation is carried out in the wide range of game environments those relate to the various social dilemmas where we are able to draw a new rigorous mathematical track to tackle the heterogeneity of complex networks. The set of modified criteria reveals the exact fact about the emergence and maintenance of cooperation in the structured population. We find that in general, nature promotes the environment of coexistent traits.

Best connected rectangular arrangements

Directory of Open Access Journals (Sweden)

Krishnendra Shekhawat

2016-03-01

Full Text Available It can be found quite often in the literature that many well-known architects have employed either the golden rectangle or the Fibonacci rectangle in their works. On contrary, it is rare to find any specific reason for using them so often. Recently, Shekhawat (2015 proved that the golden rectangle and the Fibonacci rectangle are one of the best connected rectangular arrangements and this may be one of the reasons for their high presence in architectural designs. In this work we present an algorithm that generates n-4 best connected rectangular arrangements so that the proposed solutions can be further used by architects for their designs.

International medical cooperation project for State of Libya using international medical tourism system in Thailand

OpenAIRE

奥寺, 敬; 坂本, 美重

2013-01-01

International medical cooperation project for State of Libya is reported. The concept of this project is to treat Libyan injured people using international medical tourism system in Thailand. Management of patient, including evaluation, domestic and international transportation arrangement of hospital, is supported by Normeca International Co., Ltd, (Pattaya, Thailand). Treatment of Libyan patient in two international hospitals (Bangpakok 9 Hospital and Navamin 9 Hopsital) in Bangkok was succ...

Study of mandible reconstruction using a fibula flap with application of additive manufacturing technology.

Science.gov (United States)

Tsai, Ming-June; Wu, Ching-Tsai

2014-05-06

This study aimed to establish surgical guiding techniques for completing mandible lesion resection and reconstruction of the mandible defect area with fibula sections in one surgery by applying additive manufacturing technology, which can reduce the surgical duration and enhance the surgical accuracy and success rate. A computer assisted mandible reconstruction planning (CAMRP) program was used to calculate the optimal cutting length and number of fibula pieces and design the fixtures for mandible cutting, registration, and arrangement of the fibula segments. The mandible cutting and registering fixtures were then generated using an additive manufacturing system. The CAMRP calculated the optimal fibula cutting length and number of segments based on the location and length of the defective portion of the mandible. The mandible cutting jig was generated according to the boundary surface of the lesion resection on the mandible STL model. The fibular cutting fixture was based on the length of each segment, and the registered fixture was used to quickly arrange the fibula pieces into the shape of the defect area. In this study, the mandibular lesion was reconstructed using registered fibular sections in one step, and the method is very easy to perform. The application of additive manufacturing technology provided customized models and the cutting fixtures and registered fixtures, which can improve the efficiency of clinical application. This study showed that the cutting fixture helped to rapidly complete lesion resection and fibula cutting, and the registered fixture enabled arrangement of the fibula pieces and allowed completion of the mandible reconstruction in a timely manner. Our method can overcome the disadvantages of traditional surgery, which requires a long and different course of treatment and is liable to cause error. With the help of optimal cutting planning by the CAMRP and the 3D printed mandible resection jig and fibula cutting fixture, this all

Arranged marriages annulled by law.

Science.gov (United States)

Zhu, H

1996-06-01

The arranged marriages of 210 young people in Yongle Town in Zunyi County of Guizhou Province were dissolved in 1995. The proportion of child betrothals, which generally happens among close relatives, is as high as 85% in the town. Some engagements, known as fetus betrothals or belt betrothals, are arranged before the children are born or while they are still infants strapped (belted) to their mothers. Dissemination of information from the Constitution, the Marriage Law, and the Regulations on the Registration of Marriage concerning marriage, healthier births, and good upbringing of children, and other information on reproductive health, has shown young people that they have the freedom to love and marry of their own free will, that their marriage is protected by law, and that consanguineous marriage is harmful to the health of future generations. Some convinced their parents that their arranged marriages should be annulled.

Storage arrangements for nuclear fuel

International Nuclear Information System (INIS)

Deacon, D.

1982-01-01

A storage arrangement for spent nuclear fuel either irradiated or pre-irradiated or for vitrified waste after spent fuel reprocessing, comprises a plenum chamber which has a base pierced by a plurality of openings each of which has sealed to it an open topped tube extending downwards and closed at its lower end. The plenum chamber, with the tubes, forms an air-filled enclosure associated with an exhaust system for exhausting air from the system through filters to maintain the interior of the enclosure at sub-atmospheric pressure. The tubes are arranged to accommodate the stored fuel and the arrangement includes a means for producing a flow of cooling air over the exterior of the tubes so that the latter effectively form a plurality of heat exchangers in close proximity to the fuel. The air may be caused to flow over the tube surfaces by a natural thermosyphon process. (author)

A Qualitative Study of Information Technology Students' Learning Outcomes during a Cooperative Education Experience

Science.gov (United States)

Krejci, Katherine T.

2010-01-01

The purpose of this qualitative descriptive study was to describe the learning outcomes of the cooperative-education experience from an Information Technology student's perspective at a large Fortune 500 manufacturing/sales company located in the Midwest United States. Open-ended interview questions were developed based on the four-component model…

Motion planning and synchronized control of the dental arch generator of the tooth-arrangement robot.

Science.gov (United States)

Jiang, Jin-Gang; Zhang, Yong-De

2013-03-01

The traditional, manual method of reproducing the dental arch form is prone to numerous random errors caused by human factors. The purpose of this study was to investigate the automatic acquisition of the dental arch and implement the motion planning and synchronized control of the dental arch generator of the multi-manipulator tooth-arrangement robot for use in full denture manufacture. First, the mathematical model of the dental arch generator was derived. Then the kinematics and control point position of the dental arch generator of the tooth arrangement robot were calculated and motion planning of each control point was analysed. A hardware control scheme is presented, based on the industrial personal computer and control card PC6401. In order to gain single-axis, precise control of the dental arch generator, we studied the control pulse realization of high-resolution timing. Real-time, closed-loop, synchronous control was applied to the dental arch generator. Experimental control of the dental arch generator and preliminary tooth arrangement were gained by using the multi-manipulator tooth-arrangement robotic system. The dental arch generator can automatically generate a dental arch to fit a patient according to the patient's arch parameters. Repeated positioning accuracy is 0.12 mm for the slipways that drive the dental arch generator. The maximum value of single-point error is 1.83 mm, while the arc-width direction (x axis) is -33.29 mm. A novel system that generates the dental arch has been developed. The traditional method of manually determining the dental arch may soon be replaced by a robot to assist in generating a more individual dental arch. The system can be used to fabricate full dentures and bend orthodontic wires. Copyright © 2012 John Wiley & Sons, Ltd.

Report on diagnosis and survey on research cooperation in the research cooperation promotion project in fiscal 1994. Research cooperation on manufacturing clean fuel for consumer use from gasified coal gas / Research cooperation on a method for pulp manufacturing of low-pollution and energy saving type by using non-wood raw materials; 1994 nendo kenkyu kyoryoku suishin jigyo 'kenkyu kyoryoku shindan chosa' hokokusho. Sekitan gas ka gas kara no minseiyo clean nenryo seizo ni kansuru kenkyu kyoryoku / himokuzaikei genryo wo mochiita teikogai shoenegata pulp seizoho ni kansuru kenkyu kyoryoku

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-03-01

In solving the problems in developing technologies peculiar to developing countries, Japan will provide cooperation. This paper describes the achievements in diagnosis and survey in fiscal 1994. Development will be made on a manufacturing process for dimethylether (DME), a synthesizable and portable clean fuel, by using coal produced in China. Annual DME production of 10,000 tons will make it possible to supply 50,000 households with the fuel of one year consumption, whereas return on the construction investment and profit can be expected. At the Shanxi Coal Chemistry Research Institute, a 500 tons a year plant making DME from gasified coal gas is scheduled to begin operation. Development will be made on a pulp manufacturing technology in China, in which environmental pollution due to waste water is largely reduced, and operation cost is reduced. Application of the oxygen-alkaline evaporation and decomposition process developed in Japan will be considered, which uses non-wood raw material such as rice straw, wheat straw and megass). The raw materials are immersed continually in low-concentration alkaline solution, dehydrated, and then lignin is oxidized and decomposed by using oxygen in a continuous oxidation reactor to make the material into pulp. China uses non-wood materials as paper raw materials at 80%, whereas effects are expected in waste water pollution prevention, energy saving, resource saving and economics. (NEDO)

A User Cooperation Stimulating Strategy Based on Cooperative Game Theory in Cooperative Relay Networks

Directory of Open Access Journals (Sweden)

Ping Zhang

2009-01-01

Full Text Available This paper proposes a user cooperation stimulating strategy among rational users. The strategy is based on cooperative game theory and enacted in the context of cooperative relay networks. Using the pricing-based mechanism, the system is modeled initially with two nodes and a Base Station (BS. Within this framework, each node is treated as a rational decision maker. To this end, each node can decide whether to cooperate and how to cooperate. Cooperative game theory assists in providing an optimal system utility and provides fairness among users. Under different cooperative forwarding modes, certain questions are carefully investigated, including “what is each node's best reaction to maximize its utility?” and “what is the optimal reimbursement to encourage cooperation?” Simulation results show that the nodes benefit from the proposed cooperation stimulating strategy in terms of utility and thus justify the fairness between each user.

A User Cooperation Stimulating Strategy Based on Cooperative Game Theory in Cooperative Relay Networks

Directory of Open Access Journals (Sweden)

Jiang Fan

2009-01-01

Full Text Available This paper proposes a user cooperation stimulating strategy among rational users. The strategy is based on cooperative game theory and enacted in the context of cooperative relay networks. Using the pricing-based mechanism, the system is modeled initially with two nodes and a Base Station (BS. Within this framework, each node is treated as a rational decision maker. To this end, each node can decide whether to cooperate and how to cooperate. Cooperative game theory assists in providing an optimal system utility and provides fairness among users. Under different cooperative forwarding modes, certain questions are carefully investigated, including "what is each node's best reaction to maximize its utility?" and "what is the optimal reimbursement to encourage cooperation?" Simulation results show that the nodes benefit from the proposed cooperation stimulating strategy in terms of utility and thus justify the fairness between each user.

46 CFR 117.150 - Survival craft embarkation arrangements.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft embarkation arrangements. 117.150 Section... EQUIPMENT AND ARRANGEMENTS Survival Craft Arrangements and Equipment § 117.150 Survival craft embarkation... apparatus when either— (1) The embarkation station for the survival craft is on a deck more than 4.5 meters...

Precompetitive cooperative research

International Nuclear Information System (INIS)

Holton, W.C.

1991-01-01

This paper reports that in the current worldwide technology environment, it is essential for the U.S. microelectronics industry, and especially for the integrated circuit portion of that industry, that precompetitive cooperative research alliances be formed and funded at a level that enables them to be effective in rapidly advancing technology. It is important to realize that technology advances with or without our direct participation. If we do not aggressively participate we are quickly left behind. Increasing complexity and miniaturization have been the themes in semiconductor technology. Many are aware that what began in the early 60's with a few masking steps and minimum dimensions measured in mils, has now evolved to a level of sophistication requiring a 100 MIP workstation for IC design and the investment of nearly $400 million dollars in fab cost to produce today's microchips. The leading nations of the world have come to realize that their future well- being is closely tied to their ability to compete in this hi- tech environment. Industry coalitions have been formed to exploit the early ramifications of emerging technologies. Improvements in overseas manufacturing have been made and continue unabated with new products, new processes, and new services being introduced at an increasing rate. Many foreign governments are now actively involved in formulating and conducting industrial and technology policies to aid their hi-tech industry. To meet these challenges, U.S. firms, with U.S. government cooperation, must respond

Talking in Taejon : regional cooperative agreement project formulation meeting

International Nuclear Information System (INIS)

McEwan, A. C.

1997-01-01

The International Atomic Energy Agency as part of its Regional Cooperative Agreement (RCA) with countries in east Asia and the neighboring Pacific, has had a project on strengthening radiation protection infrastructures operating for some years. This project has arranged training courses, workshops and other activities on a range of topics related to establishing or improving radiation protection measures and safety of radiation sources in member states of the region. A second 5 year phase of planned activities is to be concluded during 1997, and the value of the project is such that member coutntries proposed its continuation for a further 5 year period commencing in 1998. For this purpose a Task Group took the lead in assembling and evaluating proposals for consideration and approval at a meeting of national coordinators for the project held in Taejon Korea, 24-28 February. The RCA project for Phase III will be titled Enhancement and Harmonisation of Radiation Protection. The meeting of national coordinators from the region represents a unique opportunity for information sharing and cooperation in radiation protection betweem countries. (author)

The Effects of Interdependence and Cooperative Behaviors on Buyer’s Satisfaction in the Semiconductor Component Supply Chain

Directory of Open Access Journals (Sweden)

Fan-Yun Pai

2015-12-01

Full Text Available The semiconductor industry is characterized by extreme competition in price and product features. Firms need to acquire or exchange resources with their supplier or buyer partners to stay at the leading edge of technology. Cooperation between buyers and suppliers is important and power is the mechanism that can explain the cooperative behaviors. This study aims to investigate how the power structure between the buyer and supplier influences the extent of suppliers’ cooperative behaviors, and the effects of these on buyer satisfaction with the buyer-supplier relationship. Opinions from firms in semiconductor manufacturing supply chain were used to investigate the proposed model. It is found that mutual interdependence between a supplier and its buyer can enhance cooperative behaviors and power asymmetry hurt firms’ investment in cooperative behaviors. Suggestions are then provided to semiconductor supply chain members based on the findings of this work.

Percentage compensation arrangements: suspect, but not illegal.

Science.gov (United States)

Fedor, F P

2001-01-01

Percentage compensation arrangements, in which a service is outsourced to a contractor that is paid in accordance with the level of its performance, are widely used in many business sectors. The HHS Office of Inspector General (OIG) has shown concern that these arrangements in the healthcare industry may offer incentives for the performance of unnecessary services or cause false claims to be made to Federal healthcare programs in violation of the antikickback statute and the False Claims Act. Percentage compensation arrangements can work and need not run afoul of the law as long as the healthcare organization carefully oversees the arrangement and sets specific safeguards in place. These safeguards include screening contractors, carefully evaluating their compliance programs, and obligating them contractually to perform within the limits of the law.

76 FR 54235 - Supplement to the FY2010 Single-Source Cooperative Agreement With the World Health Organization...

Science.gov (United States)

2011-08-31

...''. BARDA currently funds the development of vaccine manufacturing capacity in ten developing and emerging-economy countries worldwide via a cooperative agreement with the World Health Organization (WHO). The... Research and Development Authority was developed and has been operational [[Page 54236

Spatial arrangement of faults and opening-mode fractures

Science.gov (United States)

Laubach, S. E.; Lamarche, J.; Gauthier, B. D. M.; Dunne, W. M.; Sanderson, David J.

2018-03-01

Spatial arrangement is a fundamental characteristic of fracture arrays. The pattern of fault and opening-mode fracture positions in space defines structural heterogeneity and anisotropy in a rock volume, governs how faults and fractures affect fluid flow, and impacts our understanding of the initiation, propagation and interactions during the formation of fracture patterns. This special issue highlights recent progress with respect to characterizing and understanding the spatial arrangements of fault and fracture patterns, providing examples over a wide range of scales and structural settings. Five papers describe new methods and improvements of existing techniques to quantify spatial arrangement. One study unravels the time evolution of opening-mode fracture spatial arrangement, which are data needed to compare natural patterns with progressive fracture growth in kinematic and mechanical models. Three papers investigate the role of evolving diagenesis in localizing fractures by mechanical stratigraphy and nine discuss opening-mode fracture spatial arrangement. Two papers show the relevance of complex cluster patterns to unconventional reservoirs through examples of fractures in tight gas sandstone horizontal wells, and a study of fracture arrangement in shale. Four papers demonstrate the roles of folds in fracture localization and the development spatial patterns. One paper models along-fault friction and fluid pressure and their effects on fault-related fracture arrangement. Contributions address deformation band patterns in carbonate rocks and fault size and arrangement above a detachment fault. Three papers describe fault and fracture arrangements in basement terrains, and three document fracture patterns in shale. This collection of papers points toward improvement in field methods, continuing improvements in computer-based data analysis and creation of synthetic fracture patterns, and opportunities for further understanding fault and fracture attributes in

Bilateral cooperation between Germany and Brazil on fuel irradiation

International Nuclear Information System (INIS)

Dias, J.W.

1977-01-01

Within the framework of the Government Agreement on Scientific and Technical Cooperation between the Federal Republic of Germany and Brazil, the Brazilian National Atomic Commission and the Juelich Nuclear Research Center (KFA) signed on 23rd April, 1971 an Agreement on Cooperation in the field of Nuclear Research and Reactor Technology. Projects have been elaborated in fields of mutual interest to share activities between the partner institutes in both countries. A typical project is the fuel irradiation programme jointly prepared by NUCLEBRAS and KFA-Juelich. Brazil is planning to use elements of its own production in nuclear power plants to be erected within the German-Brazilian Industrial Agreement. As no material test reactor is available in Brazil it is expedient to irradiate samples of Brazilian production in Germany. Brazilian collaborators will participate in the preparation, execution and post-irradiation examination. In this way an optimum transfer of all information and results is assured. In the first phase, sample rods manufactured in Brazil are irradiated in the FRJ-2 test reactor in Juelich. These rods are assembled under clean conditions in the NUCLEBRAS research centres. The first Brazilian test rods showed excellent in-pile behaviour even under very high fuel rod capacity. In the second phase, fuel rods of original length manufactured and assembled in Brazil will be irradiated in German power plants, and, at the same time, additional irradiations of small samples will be carried out in test reactors. In the third phase, rod clusters and complete fuel elements will be manufactured in Brazil and irradiated in German power plants until target burn-up. All the necessary prerequisites have been fulfilled to meet the above requirements, i.e. mutual interest, good infrastructure maintained by both partners, qualified personnel and last but not least unbureaucratic and effective help by the coordinating offices of NUCLEBRAS and KFA

Electricity generation sectors under purchase obligation: support arrangement analysis

International Nuclear Information System (INIS)

2013-04-01

This report aims at assessing the operation of the support arrangement by which currently benefit some electricity production sectors in France (renewable energies, co-generation) with respect to the evolution of the energy mix within the frame of energy transition. Other support arrangements presently adopted in Europe are also addressed as lessons to be learned. Criteria are established for any support arrangement. The report presents the French and European context regarding such support arrangement with purchasing obligation, and addresses the future evolutions of the European Commission. It highlights challenges for the electric system and for the energy market (impact on investments, optimization of market operation), describes and assesses the French purchasing obligation arrangement, and describes and assesses other existing support arrangements

Study on Pole Arrangement of the CEDM Coils

International Nuclear Information System (INIS)

Park, Jin Seok; Lee, Myoung Goo; Kim, Hyun Min; Cho, Yeon Ho; Choi, Taek Sang

2013-01-01

The coil stack assembly is important for reliable operation of the CEDM, there have been efforts to improve the design by optimizing the design parameters such as dimensions and winding turns. However, magnetic forces of the CEDM can also change by different pole arrangement even if their design parameters are the same. Since the latch coil and lift coil are installed connected to each other, they produce magnetically coupled field when they are energized at the same time. This coupling field can affect the magnetic force of the CEDM significantly. In this paper, coil pole arrangement effects are studied. Electro-magnetic analysis is performed for the different pole arrangements of the CEDM coils to calculate the magnetic forces. Pole arrangement effects on magnetic forces were studied by static analysis of the CEDM magnetic field. Magnetic forces were calculated and compared for the two different pole arrangements of the coils. The results show that the magnetic poles of the lift coil and latch coil shall be arranged to have the same magnetic pole direction to achieve higher magnetic force

Manufacture of electrical and magnetic graded and anisotropic materials for novel manipulations of microwaves.

Science.gov (United States)

Grant, P S; Castles, F; Lei, Q; Wang, Y; Janurudin, J M; Isakov, D; Speller, S; Dancer, C; Grovenor, C R M

2015-08-28

Spatial transformations (ST) provide a design framework to generate a required spatial distribution of electrical and magnetic properties of materials to effect manipulations of electromagnetic waves. To obtain the electromagnetic properties required by these designs, the most common materials approach has involved periodic arrays of metal-containing subwavelength elements. While aspects of ST theory have been confirmed using these structures, they are often disadvantaged by narrowband operation, high losses and difficulties in implementation. An all-dielectric approach involves weaker interactions with applied fields, but may offer more flexibility for practical implementation. This paper investigates manufacturing approaches to produce composite materials that may be conveniently arranged spatially, according to ST-based designs. A key aim is to highlight the limitations and possibilities of various manufacturing approaches, to constrain designs to those that may be achievable. The article focuses on polymer-based nano- and microcomposites in which interactions with microwaves are achieved by loading the polymers with high-permittivity and high-permeability particles, and manufacturing approaches based on spray deposition, extrusion, casting and additive manufacture.

Design and Manufacture of a Highly Reliable, Miniaturized and Low Mass Shutter Mechanism

Science.gov (United States)

Manhart, M.; Zeh, T.; Preibler, G.; Hurni, A.; Walter, I.; Helbert, J.; Hiesinger, H.

2010-01-01

This paper describes the development, manufacturing and testing of a lightweight shutter mechanism made of titanium for the MERTIS Instrument. MERTIS is a thermal infrared imaging spectrometer onboard ESA's future BepiColombo mission to Mercury. The mechanism is built as a parallelogram arrangement of flexible hinges, actuated by a voice coil. In a first test run, it was shown that the selected EDM processing led to the generation of titanium oxides and an oxygen-enriched surface layer on the substrate (so called alpha-case layer). In the revised version of the shutter, it was possible to manufacture the complex geometry by micro-milling and an adjacent pickling procedure. The adequacy of this approach was verified by lifetime and vibration testing.

Multiple Employer Welfare Arrangements

Science.gov (United States)

1992-01-01

Sponsors in the Private Nonfarm Sector in the United States, 1978-79," Volume IV, Description and Analysis of Plans and Plan Sponsors, NTIS # PB81-180366...Labor finds to be collectively bargained plans, and those organized by rural electrical cooperatives and rural telephone cooperatives. Thus, except for...their existence and generally higher cost than uninsured plans no doubt contributed to the development of other types of multiple employer

Coordination of the U.S. DOE-Argentine National Atomic Energy Commission (CNEA) science and technology implementing arrangement. Final report

International Nuclear Information System (INIS)

Ebadian, M.A.

1998-01-01

In 1989, the US Department of Energy (DOE) established the Office of Environmental Management (EM) and delegated to the office the responsibility of cleaning up the US nuclear weapons complex. EM's mission has three primary activities: (1) to assess, remediate, and monitor contaminated sites and facilities; (2) to store, treat, and dispose of wastes from past and current operations; and (3) to develop and implement innovative technologies for environmental remediation. To this end, EM has established domestic and international cooperative technology development programs, including one with the Republic of Argentina. Cooperating with Argentine scientific institutes and industry meets US cleanup objectives by: (1) identifying and accessing Argentine EM-related technologies, thereby leveraging investments and providing cost-savings; (2) improving access to technical information, scientific expertise, and technologies applicable to EM needs; and (3) fostering the development of innovative environmental technologies by increasing US private sector opportunities in Argentina in EM-related areas. Florida International University's Hemispheric Center for Environmental Technology (FIU-HCET) serves as DOE-OST's primary technology transfer agent. FIU-HCET acts as the coordinating and managing body for the Department of Energy (DOE)-Argentina National Atomic Energy Commission (CNEA) Arrangement. Activities include implementing standard operating procedures, tracking various technical projects, hosting visiting scientists, advising DOE of potential joint projects based on previous studies, and demonstrating/transferring desired technology. HCET hosts and directs the annual Joint Coordinating Committee for Radioactive and Mixed Waste Management meeting between the DOE and CNEA representatives. Additionally, HCET is evaluating the possibility of establishing similar arrangements with other Latin American countries

[PICS: pharmaceutical inspection cooperation scheme].

Science.gov (United States)

Morénas, J

2009-01-01

The pharmaceutical inspection cooperation scheme (PICS) is a structure containing 34 participating authorities located worldwide (October 2008). It has been created in 1995 on the basis of the pharmaceutical inspection convention (PIC) settled by the European free trade association (EFTA) in1970. This scheme has different goals as to be an international recognised body in the field of good manufacturing practices (GMP), for training inspectors (by the way of an annual seminar and experts circles related notably to active pharmaceutical ingredients [API], quality risk management, computerized systems, useful for the writing of inspection's aide-memoires). PICS is also leading to high standards for GMP inspectorates (through regular crossed audits) and being a room for exchanges on technical matters between inspectors but also between inspectors and pharmaceutical industry.

Cooperation in Global Environmental Governance for Building A Conflict Prevention Architecture in Natural Resources Torno

OpenAIRE

Padilha, Norma Sueli; Cardoso, Simone Alves

2016-01-01

This article aims to demonstrate the effectiveness and the importance of cooperation in global environmental governance arrangements to prevent conflicts and promote pea- cebuilding through analysis the partnership between the European Union (EU) and the United Nations (UN) around the natural resources and conflict prevention. The problem to be addressed and the challenge to overcome by the international community is the fra- gility of some countries in creating and maintaining institutions t...

Arrangement for formation perforating and fracturing

Energy Technology Data Exchange (ETDEWEB)

Belyaev, B M; Vitsenii, E M; Zheltov, Yu P; Nikolaev, S I

1962-03-06

An arrangement for perforating and hydraulic fracturing, to be lowered on a wire line, consists of a chamber with a shaped charge, a head and a nozzle. This arrangement enables carrying out, simultaneously, the operations of perforating and fracturing. The device may be equipped with separate sections with shaped charges and a powder chamber in which powder charges are placed, designed to be ignited in sequence by slow- acting electric igniters. For controlling the gas pressure and strengthening the arrangement in the zone of perforation, the device is equipped with rubber seals which release the ring elements under pressure of explosive gas. Between the walls of the casing and the rubber seals is an annular space through the gas escapes.

To cooperate or not to cooperate

DEFF Research Database (Denmark)

Wessels, Josepha Ivanka

To Cooperate or not to Cooperate...? discusses results of a research project to study the rehabilitation of 1500-year old water tunnels, so called "qanats", in Syria. Communities all over the world are using traditional technologies to extract drinkingwater, irrigate their lands and feed...... their livestock. But these often sustainable and ancient ways to make use of groundwater are in rapid decline worldwide. A research project started in 1999 to study the rehabilitation of 1500-year old water tunnels called "qanats"in Syria. To Cooperate or not to Cooperate...? discusses results and outcomes...

Effects of Magnetic Particles Entrance Arrange-ments on Mixing Efficiency of a Magnetic Bead Micromixer

Institute of Scientific and Technical Information of China (English)

Reza Kamali∗; Seyed Alireza Shekoohi; Alireza Binesh

2014-01-01

In this study, a computer code is developed to numerically investigate a magnetic bead micromixer under different conditions. The micromixer consists of a microchannel and numerous micro magnetic particles which enter the micromixer by fluid flows and are actuated by an alternating magnetic field normal to the main flow. An important feature of micromixer which is not considered before by researchers is the particle entrance arrangement into the micromixer. This parameter could effectively affect the micromixer efficiency. There are two general micro magnetic particle entrance arrangements in magnetic bead micromixers: determined position entrance and random position entrance. In the case of determined position entrances, micro magnetic particles enter the micromixer at specific positions of entrance cross section. However, in a random position entrance, particles enter the microchannel with no order. In this study mixing efficiencies of identical magnetic bead micromixers which only differ in particle entrance arrangement are numerically investigated and compared. The results reported in this paper illustrate that the prepared computer code can be one of the most powerful and beneficial tools for the magnetic bead micromixer performance analysis. In addition, the results show that some features of the magnetic bead micromixer are strongly affected by the entrance arrangement of the particles.

Cooperation of CMEA member states in the field of the manufacture and use of stable isotopes and compounds thus labelled

International Nuclear Information System (INIS)

Ertel, G.; Ewald, G.

1977-01-01

The contribution presents a survey of scientific-technical cooperation of CMEA member states in the field of stable isotopes, it deals with the specialization of stable isotope production and compounds thus labelled, and gives the prospects for further development of this cooperation. (HK) [de

Report for fiscal 1995 on simple operation type CAD/CAM system development through international cooperation. Cooperation for joint researches; 1995 nendo 'kan'i sosagata denshi sekkei seisan shien system no kaihatsu ni kansuru kenkyu kyoryoku' ni kansuru hokokusho. Kyodo kenkyu kyoryoku

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Reported herein are the joint research results of the project (manufacturing technology supported by advanced and integrated information system through international cooperation (MATIC)), implemented in China, Indonesia, Malaysia, Singapore and Thailand by Center of International Cooperation for Computerization, commissioned by NEDO. Japan invited researchers from each country to explain the research themes, and discussed construction of the systems in each country. Japanese experts visited the research institutes and cooperative works in these countries, to discuss the research cooperation themes, and survey the conditions and technical levels of these research institutes, and information infrastructures. The oversea researchers were invited to Japan for the MATIC international seminar, discussions for research cooperation themes, and MATIC cooperation promotion committee. Textile and apparel researchers were also invited from China. Japanese experts visited China, Indonesia, Malaysia, Singapore and Thailand for the on-the-spot surveys for each working group. (NEDO)

People management implications of virtual workplace arrangements

Directory of Open Access Journals (Sweden)

K. Ortlepp

2006-12-01

Full Text Available Purpose: The purpose of this paper is to investigate the factors that led to an organisation implementing a particular form of virtual workplace arrangement, namely, home-based work. The benefits and disadvantages associated with this form of work arrangement are explored from both the managers' and home-based employees' perspectives. Design/Methodology/Approach: Given the exploratory nature of the empirical study on which this paper is based, a qualitative research design was adopted so as to ensure that the data collection process was dynamic and probing in nature. Semi-structured in-depth interviews were therefore used as instruments for data collection. Findings: The research findings indicate that virtual work arrangements such as home-based work arrangements have advantages for both employers and employees. For instance, reduction of costs associated with office space and facilities, decrease in absenteeism rates, increased employee job satisfaction and improvements in employees' general quality of life. However, a number of negative experiences related to this form of virtual work arrangement are also evident, for example, feelings of isolation as well as stress related to the inability to have firm boundaries between work and family responsibilities. Implications: Based on the insights gained from the findings in the empirical study, a number of areas that need to be given specific attention when organisations are introducing virtual workplace arrangements of this nature are identified. Recommendations made in this article are important for human resource management specialists as well as core business policy makers considering different forms of organisational design. Originality/Value: Maximising the quality of production and service provided has become the prime objective in most organisations in the 21st century. Technology has made it possible for some jobs to be performed at any place at any time and has facilitated the

75 FR 10319 - Cooper Tools-Sumter, Cooper Tools Divisions, a Subsidiary of Cooper Industries, Inc., Including...

Science.gov (United States)

2010-03-05

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-71,602] Cooper Tools--Sumter, Cooper Tools Divisions, a Subsidiary of Cooper Industries, Inc., Including On-Site Leased Workers From... January 26, 2010, applicable to workers of Cooper Tools--Sumter, Cooper Tools Division, a subsidiary of...

Living arrangements of young adults in Europe

NARCIS (Netherlands)

Schwanitz, Katrin; Mulder, Clara H.

2015-01-01

Comparative research suggests that there are great cross-national and cross-temporal differences in living arrangements of young adults aged 18-34 in Europe. In this paper, we examine young adults’ living arrangements (1) across several European countries and different national contexts, and (2) by

Exchange rate arrangements: From extreme to "normal"

Directory of Open Access Journals (Sweden)

Beker Emilija

2006-01-01

Full Text Available The paper studies theoretical and empirical location dispersion of exchange rate arrangements - rigid-intermediate-flexible regimes, in the context of extreme arrangements of a currency board, dollarization and monetary union moderate characteristics of intermediate arrangements (adjustable pegs crawling pegs and target zones and imperative-process "normalization" in the form of a managed or clean floating system. It is established that de iure and de facto classifications generate "fear of floating" and "fear of pegging". The "impossible trinity" under the conditions of capital liberalization and globalization creates a bipolar view or hypothesis of vanishing intermediate exchange rate regimes.

Renewable energy and power cooperation between China and six Latin American nations

Science.gov (United States)

Xie, Yuetao; Yan, Bingzhong; Zhou, Shichun

2018-02-01

China has been entitled the biggest supplier and largest market of renewable energy for the past few years. With One Belt and One Road initiative carrying on, the China’s renewable energy industry is looking for opportunities across the world. Latin America, which has rich renewable energy resources and urge demand for a cleaner and more sustainable energy system, may become an important target market for China. The prospect and potential of renewable energy cooperation between China and Latin America are promising. In this paper, six Latin American nations of varied background were selected as study cases. Their nation profile, energy resources, power market, and energy development trends were analysed, and the cooperation prospect and potential between these nations and China in renewable energy sector were discussed. The results indicate that Argentina and Bolivia are most potential cooperation partners, and project development and equipment manufacturing of non-hydro renewable energy, along with power grid upgrading are the prioritized areas. In addition, recommendations and solutions addressing the issues and challenges incurred in the current bilateral energy cooperation between China and Latin American nations were proposed.

Patient positioning and supporting arrangement

International Nuclear Information System (INIS)

Heavens, M.; James, R.C.; Slinn, D.S.

1980-01-01

This patent specification describes an E.M.I. claim relating to a patient positioning and support arrangement for a computerised axial tomography system, the arrangement comprising a curved platter upon which the patient can be disposed, a table having a curved groove to accommodate the platter, and means for driving the platter slidably along the groove; the platter being formed of a substantially rigid platform shaped to conform to the groove, and a shroud, secured to the platter and disposed between the platter and the surface of the groove, so as to permit the platter to slide smoothly. (U.K.)

The re-emergence of sodium ion batteries: testing, processing, and manufacturability

Science.gov (United States)

Roberts, Samuel; Kendrick, Emma

2018-01-01

With the re-emergence of sodium ion batteries (NIBs), we discuss the reasons for the recent interests in this technology and discuss the synergies between lithium ion battery (LIB) and NIB technologies and the potential for NIB as a “drop-in” technology for LIB manufacturing. The electrochemical testing of sodium materials in sodium metal anode arrangements is reviewed. The performance, stability, and polarization of the sodium in these test cells lead to alternative testing in three-electrode and alternative anode cell configurations. NIB manufacturability is also discussed, together with the impact that the material stability has upon the electrodes and coating. Finally, full-cell NIB technologies are reviewed, and literature proof-of-concept cells give an idea of some of the key differences in the testing protocols of these batteries. For more commercially relevant formats, safety, passive voltage control through cell balancing and cell formation aspects are discussed. PMID:29910609

Support mechanism for a mirrored surface or other arrangement

Science.gov (United States)

Cutburth, Ronald W.

1987-01-01

An adjustment mechanism such as a three point spherical mount for adjustably supporting a planer mirror or other type of arrangement relative to a plane defined by a given pair of intersecting perpendicular axes is disclosed herein. This mechanism includes first means for fixedly supporting the mirror or other arrangement such that the latter is positionable within the plane defined by the given pair of intersecting perpendicular axes. This latter means and the mirror or other such arrangement are supported by second means for limited movement back and forth about either of the intersecting axes. Moreover, this second means supports the first means and the mirror or other arrangement such that the latter is not movable in any other way whereby the point on the mirror or other arrangement coinciding with the intersection of the given axes does not move or float, thereby making the ability to adjust the mirror or other such arrangement more precise and accurate.

Integration between manufacturers and third party logistics providers?

DEFF Research Database (Denmark)

Mortensen, Ole; Lemoine, Olga W.

2008-01-01

Purpose - The purpose of this study is to analyse the extent of the integration between manufacturers and third party logistics (TPL) providers at present and how the integration is expected to develop in the near future. The focus is on studying what tasks are part of the cooperation, what...... of the eight business processes studied. Further integration in the same processes is expected, based on ICT tools and with a focus on cost. ICT competences are primarily seen as a qualifier not a differentiator. Because the future TPL industry is expected to be characterised by more standardised services...

Baffle-former arrangement for nuclear reactor vessel internals

International Nuclear Information System (INIS)

Machado, O.J.; Berringer, R.T.

1978-01-01

A baffle-former arrangement for the reactor vessel internals of a nuclear reactor is described. The arrangement includes positioning of formers at the same elevations as the fuel assembly grids, and positioning flow holes in the baffle plates directly beneath selected former grid elevations. The arrangement reduces detrimental cross flows, maintains proper core barrel and baffle temperatures, and alleviates the potential of overpressurization within the baffle-former assembly under assumed major accident conditions

IAEA to Cooperate with Japan on Nuclear Security at 2020 Olympic Games in Tokyo

International Nuclear Information System (INIS)

2018-01-01

The International Atomic Energy Agency (IAEA) and the Government of Japan signed an agreement today aimed at enhancing nuclear security measures for the summer Olympic Games and Paralympic Games in Tokyo in 2020. The agreement follows previous IAEA support to major public events, including the 2016 Olympic Games in Rio de Janeiro and the 2012 European soccer championship in Poland and Ukraine. IAEA Director General Yukiya Amano and Japanese Foreign Minister Taro Kono presided over the signing ceremony at the Agency’s headquarters in Vienna. Practical Arrangements outlining the planned cooperation were signed by IAEA Deputy Director General Juan Carlos Lentijo, head of the Department of Nuclear Safety and Security, and H.E. Mitsuru Kitano, Japan’s Ambassador to the International Organizations in Vienna. “The IAEA has extensive experience in supporting Member States on nuclear security for major public events,” Amano said at the ceremony. “The Agency welcomes the cooperation to support the Olympic and Paralympic Games in Tokyo, and is already cooperating with Japan by sharing the experiences of Member States which previously hosted the Olympics.” The details of the cooperation will be decided in due course, but the possible areas of cooperation include the IAEA offering Japanese authorities training courses, workshops, technical visits and exercises related to nuclear security, hosting preparatory technical meetings and lending supplementary radiation detection equipment. The IAEA and Japan may also exchange information related to nuclear security events as appropriate and through the cooperation, the IAEA will also benefit from Japan’s good practices on nuclear security.

Impacts of Academic R&D on High-Tech Manufacturing Products: Tentative Evidence from Supercomputer Data

Science.gov (United States)

Le, Thanh; Tang, Kam Ki

2015-01-01

This paper empirically examines the impact of academic research on high-tech manufacturing growth of 28 Organisation for Economic Co-operation and Development (OECD) and emerging countries over the 1991-2005 period. A standard research and development (R&D) expenditure based measure is found to be too general to capture the input in high-tech…

Development of Integration in Manufacturing

DEFF Research Database (Denmark)

Sørensen, Torben; Trostmann, Erik

1996-01-01

significance to all manufacturing industries.International standardization based on the product model definition standard STEP (ISO10303) is playing a key role in promoting a modern approach to Product Data Technology. The initial release of STEP, consisting of twelve essential parts, has recently been...... must be extended to cope with descriptions of functional behavior of products.In the robotics area, Computer Aided Robotics (CAR) systems for design, off-line programming, and simulation are currently increasing their model features with new topics, such as multi-body dynamics, realistic motion......Current international developments in the broad field of Product Data Technology are advancing rapidly and are leading up to new levels of technology in product model definition, product model communications, enterprise integration and cooperation. These developments will be of strategic...

46 CFR 108.525 - Survival craft number and arrangement.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft number and arrangement. 108.525 Section... UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.525 Survival craft number and arrangement. (a... arrangement of survival craft: (1) Lifeboats with an aggregate capacity to accommodate the total number of...

Nuclear fuel in water reactors: manufacturing technology operational experience and development activities in the Federal Republic of Germany

International Nuclear Information System (INIS)

Holzer, R.; Knoedler, D.

1977-01-01

The nuclear fuel industry in the F.R. Germany comprises the full range of manufacturing capabilities for pressurized - boiling- and heavy water reactor technology. The existing manufacturing companies are RBU and Alkem. RBU makes natural and enriched UO 2 -fuel assemblies, starting with powder preparation. Facilites to produce UO 2 -Gadolinia and UO 2 -ThO 2 fuel are also available. Alkem is manufacturing mixed oxide UO 2 /PuO 2 -fuel and -rods. Zircaloy cladding tubes are produced by NRG and MRW. This constitutes the largest single nuclear fuel manufacturing capacity outside the USA. The companies are interested in export and current capacity trends indicate some overcapacity caused by delays in plant schedules. Construction of a new fuel manufacturing plant in the FRG has been announced by Exxon. Supplementary to quality control in manufacturing an integrated quality assurance-system has been established between the reactor vendor KWU, fuel design and -engineering division, and the existing manufacturing companies for fuel and tubing. The operating experience with LWR and HWR fuel dates back to 1964/65 and proves good performance. No generic problems like densification or rod bow were encountered. Possible reasons for the small fraction of defective rods could be quickly identified by a fast feedback system incorporating a close cooperation between KWU and the utilities. KWU combines fuel development, hot-cell and poolside service facilities as well as fuel technology linking to manufacturing in one hand. The common responsibility of KWU for core- and fuel design which enabled an integral optimization was also an important reason for the successful operation and flexibility in design. Development efforts will be concentrated on tests to improve the understanding of power ramping capability under extreme operational and postulated abnormal conditions, on statistical evaluation of safety aspects and on improved economy. The LWR fuel development was sponsored by the

Labour Arrangements in Cassava Production in Oyo State, Nigeria

Directory of Open Access Journals (Sweden)

Abila, N.

2012-01-01

Full Text Available The study examined the effects of labour arrangements on the profitability of cassava enterprises in Oyo North Area of Oyo State, Nigeria. A multi-stage sampling technique was adopted for data collection, while data were analysed using descriptive statistics and budgetary analysis. The results show that the prevalent labour arrangements for cassava enterprises are: a combination of Family, Hired and Contract labour (38.9%; Family-Hired labour (27.8%; Family-Contract labour (31.1%. The gross margin per hectares across labour arrangements are N279481.99 (all-labour, N286044.24 (family-hired, N216940.10 (familycontract, and N235000.00 (family only. The returns on a naira invested on variable costs across different labour arrangements for cassava enterprises are N2.04 (all-labour, N3.66 (family-hired, N2.37 (familycontract, and N2.61 (family only. This implies that a unit (N1 variable cost in the various labour arrangements of all-labour, family/hired, family/contract and family only in cassava production will yield a marginal return of N3.04, N3.66, N2.37 and N2.61 respectively. Family-hired labour arrangement yields higher marginal return per unit of manday and one naira spent than all other arrangements. The study recommends among others the application of laboursaving technologies and an optimum combination of various labour arrangements to reduce the cost of labour used in cassava production.

Methodology for systematic analysis and improvement of manufacturing unit process life-cycle inventory (UPLCI)—CO2PE! initiative (cooperative effort on process emissions in manufacturing). Part 1: Methodology description

DEFF Research Database (Denmark)

Kellens, Karel; Dewulf, Wim; Overcash, Michael

2012-01-01

the provision of high-quality data for LCA studies of products using these unit process datasets for the manufacturing processes, as well as the in-depth analysis of individual manufacturing unit processes.In addition, the accruing availability of data for a range of similar machines (same process, different......This report proposes a life-cycle analysis (LCA)-oriented methodology for systematic inventory analysis of the use phase of manufacturing unit processes providing unit process datasets to be used in life-cycle inventory (LCI) databases and libraries. The methodology has been developed...... and resource efficiency improvements of the manufacturing unit process. To ensure optimal reproducibility and applicability, documentation guidelines for data and metadata are included in both approaches. Guidance on definition of functional unit and reference flow as well as on determination of system...

Meiotic transmission of Drosophila pseudoobscura chromosomal arrangements.

Directory of Open Access Journals (Sweden)

Richard P Meisel

Full Text Available Drosophila pseudoobscura harbors a rich gene arrangement polymorphism on the third chromosome generated by a series of overlapping paracentric inversions. The arrangements suppress recombination in heterokaryotypic individuals, which allows for the selective maintenance of coadapted gene complexes. Previous mapping experiments used to determine the degree to which recombination is suppressed in gene arrangement heterozygotes produced non-recombinant progeny in non-Mendelian ratios. The deviations from Mendelian expectations could be the result of viability differences between wild and mutant chromosomes, meiotic drive because of achiasmate pairing of homologues in heterokaryotypic females during meiosis, or a combination of both mechanisms. The possibility that the frequencies of the chromosomal arrangements in natural populations are affected by mechanisms other than adaptive selection led us to consider these hypotheses. We performed reciprocal crosses involving both heterozygous males and females to determine if the frequency of the non-recombinant progeny deviates significantly from Mendelian expectations and if the frequencies deviate between reciprocal crosses. We failed to observe non-Mendelian ratios in multiple crosses, and the frequency of the non-recombinant classes differed in only one of five pairs of reciprocal crosses despite sufficient power to detect these differences in all crosses. Our results indicate that deviations from Mendelian expectations in recombination experiments involving the D. pseudoobscura inversion system are most likely due to fitness differences of gene arrangement karyotypes in different environments.

Consequences for designer and manufacturer of mechanical components due to future requirements in Europe

International Nuclear Information System (INIS)

Hans-Joachim, Frank

2001-01-01

In the frame of European harmonization, a lot of changes on requirements for designer and manufacturer of mechanical components have been performed. Differed organizations are involved in preparing future requirements for nuclear application. On one side the French German cooperation on the development of EPR. At the origin of this project was the common decision in 1989 of Framatome and Siemens to cooperate through NPI, to design the Nuclear Island, which meets the future needs of utilities. EDF and a group of the main German Utilities joined this cooperation in 1991 and since then they have been totally involved to the progress of the work. In addition, all the process was backed up to the end by the strong cooperation between the French and the German. Safety Authorities, which have a long lasting cooperation to define common requirements, which have to be applied to future Nuclear Power Plants. Furthermore an organization has been set up to elaborate common codes related to the EPR design, at the level of the French design and construction rules (RCC) or the German KTA safety standards, the so-called EPR technical codes (ETC). On the other side, the European utilities co-operate on a much broader basis for the establishment of European Utilities Requirements (EUR). These requirements are prepared by a group of European utilities that represent the major European electricity generating companies that are determined to keep the nuclear option open. The technical requirements specified in the EUR document define the boundaries in which future plants need to be designed in order to be acceptable for the needs of the utilities and in order to fulfill the basic requirements of competitive power generation costs and licensability in all countries represented in the EUR group. All the new requirements have to be applied by designer and manufacturer. Siemens /SNP act as a designer of a lot of various vessels and tanks, heat exchangers and other items of process

Design, Manufacture, and Experimental Serviceability Validation of ITER Blanket Components

Science.gov (United States)

Leshukov, A. Yu.; Strebkov, Yu. S.; Sviridenko, M. N.; Safronov, V. M.; Putrik, A. B.

2017-12-01

In 2014, the Russian Federation and the ITER International Organization signed two Procurement Arrangements (PAs) for ITER blanket components: 1.6.P1ARF.01 "Blanket First Wall" of February 14, 2014, and 1.6.P3.RF.01 "Blanket Module Connections" of December 19, 2014. The first PA stipulates development, manufacture, testing, and delivery to the ITER site of 179 Enhanced Heat Flux (EHF) First Wall (FW) Panels intended for withstanding the heat flux from the plasma up to 4.7MW/m2. Two Russian institutions, NIIEFA (Efremov Institute) and NIKIET, are responsible for the implementation of this PA. NIIEFA manufactures plasma-facing components (PFCs) of the EHF FW panels and performs the final assembly and testing of the panels, and NIKIET manufactures FW beam structures, load-bearing structures of PFCs, and all elements of the panel attachment system. As for the second PA, NIKIET is the sole official supplier of flexible blanket supports, electrical insulation key pads (EIKPs), and blanket module/vacuum vessel electrical connectors. Joint activities of NIKIET and NIIEFA for implementing PA 1.6.P1ARF.01 are briefly described, and information on implementation of PA 1.6.P3.RF.01 is given. Results of the engineering design and research efforts in the scope of the above PAs in 2015-2016 are reported, and results of developing the technology for manufacturing ITER blanket components are presented.

29 CFR 779.228 - Types of arrangements contemplated by exception.

Science.gov (United States)

2010-07-01

... Coverage Leased Departments, Franchise and Other Business Arrangements § 779.228 Types of arrangements... section 3(s) would not otherwise apply: (a) Any arrangement, whether by agreement, franchise or otherwise...

Exchange rate regimes and monetary arrangements

Directory of Open Access Journals (Sweden)

Ivan Ribnikar

2005-06-01

Full Text Available There is a close relationship between a country’s exchange rate regime and monetary arrangement and if we are to examine monetary arrangements then exchange rate regimes must first be analysed. Within the conventional and most widely used classification of exchange rate regimes into rigid and flexible or into polar regimes (hard peg and float on one side, and intermediate regimes on the other there, is a much greater variety among intermediate regimes. A more precise and, as will be seen, more useful classification of exchange rate regimes is the first topic of the paper. The second topic is how exchange rate regimes influence or determine monetary arrangements and monetary policy or monetary policy regimes: monetary autonomy versus monetary nonautonomy and discretion in monetary policy versus commitment in monetary policy. Both topics are important for countries on their path to the EU and the euro area

Technological Cooperation Networks at Bio-Manguinhos: the Role of Information and Communication Technologies

Directory of Open Access Journals (Sweden)

Lázaro Pereira de Oliveira

2015-01-01

Full Text Available This article identifies and discusses the contribution of information and communication technologies (ICTs to the technological cooperation projects of Bio-Manguinhos, a pharmaceutical manufacturer that belongs to Osvaldo Cruz Foundation (FIOCRUZ, responsible for producing vaccines, reagents and biopharmaceuticals, with priority on meeting the needs of the Brazilian public health system. It is a case study with a qualitative approach for descriptive and explanatory purposes. The data were collected from 14 interviews conducted with managers of research and development (R&D projects with high relevance to the organization. The results allow concluding that the ICTs requiring greater interdependence between partners and two-way knowledge flows have not yet been used. They also show the importance of closer cooperation between the information technology (IT and R&D areas. A future positioning of Bio-Manguinhos as a technological center focused on discovery and sale of new active ingredients can favor the use of tools that promote greater integration between the partners of technology cooperation networks.

45 CFR 302.34 - Cooperative arrangements.

Science.gov (United States)

2010-10-01

... ENFORCEMENT PROGRAM), ADMINISTRATION FOR CHILDREN AND FAMILIES, DEPARTMENT OF HEALTH AND HUMAN SERVICES STATE... single official covering more than one court, official, or agency, if the single official has the legal... needed in locating noncustodial parents, establishing paternity and securing support, to the extent that...

Teleworking through cooperation

Directory of Open Access Journals (Sweden)

Dario Minervini

2006-07-01

scheme is strictly connected to new technologies and cooperation is an important dimension of teleworking. In our study, cooperation is found performed both in social relations between employers and employees and in institutionalized relations between managers and unions. Although the two forms of cooperation, here called “social trustee cooperation” and “institutional cooperation”, are often thought as prerequisites of “best practices” of new working arrangements, our case studies demonstrate that cooperation has not always arisen that make possible to implement practices of teleworking. By focusing on cooperative relations, the results of different case studies in industry and in the service sector are discussed, thus intending to contribute to the development of sociological debate on telework.

Fact sheet on fuel manufacturing and utilization

International Nuclear Information System (INIS)

2006-01-01

The Nuclear Fuel Cycle and Materials Section (NFCMS) supports Member States to improve in-pile fuel performance and management of materials; and to develop advanced fuel technologies for ensuring reliability and economic efficiency of the nuclear fuel cycle, provides assistance to Member States to support fuel-manufacturing capability, including quality assurance techniques, optimization of manufacturing parameters and radiation protection, supports the development fuel modeling expertise in Member States, covering both normal operation and postulated and severe accident conditions, provides information and support for the operation of Nuclear Power Plant to ensure that the environment and water chemistry is appropriate for fuel operation, supports fuel failure investigations, including equipment for failed fuel detection and for post-irradiation examination and inspection, as well as fuel repair, provides information and support research into the basic properties of fuel materials, including UO2, MOX, (Th, Pu)O2, (Th, U233)O2 fuels and zirconium alloy cladding and fuel assembly components and offers guidance on the relationship with back-end requirement (interim storage, transport, reprocessing, disposal), fuel utilization and management, MOX fuels, alternative fuels and advanced fuel technology and materials, economic and other aspects of nuclear fuel use (e.g. environmental impact). Recently NFCMS provided support to a Member State manufacturing Gadolinia doped fuel and provided in-mast sipping equipment to a Nuclear Power Plant to allow the determination of fuel failure. Member States interested in fuel performance and manufacture should contact the Technical Cooperation Department of the Agency and Member States interested in knowing more about the Agency's programme on source management should contact: C. Ganguly, Section Head, V. Inozemtsev, J. Killeen

Repair of manufacturing defects in the armor of plasma facing units of the ITER Divertor Dome

International Nuclear Information System (INIS)

Litunovsky, Nikolay; Alekseenko, Evgeny; Kuznetsov, Vladimir; Lyanzberg, Dmitriy; Makhankov, Aleksey; Rulev, Roman

2013-01-01

Highlights: • Sporadic manufacturing defects in ITER Divertor Dome PFUs may be repaired. • We have developed a repair technique for ITER Divertor Dome PFUs. • Armor repair technique for ITER Divertor Dome PFUs is successfully tested. -- Abstract: The paper describes the repair procedure developed for removal of manufacturing defects occurring sporadically during armoring of plasma facing units (PFUs) of the ITER Divertor Dome. Availability of armor repair technique is prescribed by the procurement arrangement for the ITER Divertor Dome concluded in 2009 between the ITER Organization and the ITER Domestic Agency of Russia. The paper presents the detailed description of the procedure, data on its effect on the joints of the rest part of the armor and on the grain structure of the PFU heat sink. The results of thermocycling of large-scale Dome PFU mock-ups manufactured with demonstration of armor repair are also given

Repair of manufacturing defects in the armor of plasma facing units of the ITER Divertor Dome

Energy Technology Data Exchange (ETDEWEB)

Litunovsky, Nikolay, E-mail: nlitunovsky@sintez.niiefa.spb.su; Alekseenko, Evgeny; Kuznetsov, Vladimir; Lyanzberg, Dmitriy; Makhankov, Aleksey; Rulev, Roman

2013-10-15

Highlights: • Sporadic manufacturing defects in ITER Divertor Dome PFUs may be repaired. • We have developed a repair technique for ITER Divertor Dome PFUs. • Armor repair technique for ITER Divertor Dome PFUs is successfully tested. -- Abstract: The paper describes the repair procedure developed for removal of manufacturing defects occurring sporadically during armoring of plasma facing units (PFUs) of the ITER Divertor Dome. Availability of armor repair technique is prescribed by the procurement arrangement for the ITER Divertor Dome concluded in 2009 between the ITER Organization and the ITER Domestic Agency of Russia. The paper presents the detailed description of the procedure, data on its effect on the joints of the rest part of the armor and on the grain structure of the PFU heat sink. The results of thermocycling of large-scale Dome PFU mock-ups manufactured with demonstration of armor repair are also given.

Port entry arrangements

International Nuclear Information System (INIS)

Chicken, J.C.; King, M.A.

1978-01-01

The objective of the paper is to describe the safety scheme port authorities should establish to deal with any contingency that may result from the visit of a nuclear powered ship. The safety scheme should be devised to cover both normal operation and any accident conditions that could arise while the ship is in port. The paper is divided into three parts. The three parts being: background information, general instructions, and emergency procedures. The background information will describe the nature of the hazards a port authority has to be prepared to deal with, and the philosophical basis for a berthing policy. In the part dealing with general instructions the objective of the safety scheme will be described. Also this part will describe the composition of the Port Safety Panel, allocation of responsibilities, passage and berthing arrangements, general safety precautions, records required, and rescue arrangements. In the part dealing with emergency procedures the role of: the Ship's Master, Harbour Authorities, Local Police, and local Health Services are discussed. As an Appendix to the paper a copy of the safety scheme that has been devised for visits of nuclear merchant ships to Southampton is given

The impact of fit manufacturing on green manufacturing: A review

Science.gov (United States)

Qi, Ang Nian; Sin, Tan Chan; Fathullah, M.; Lee, C. C.

2017-09-01

Fit manufacturing and Green manufacturing are a new trend principle and concept. They are getting popular in industrial. This paper is identifying the impact between Fit manufacturing and Green manufacturing. Besides Fit manufacturing, Lean manufacturing, Agile manufacturing and Sustainable manufacturing gives big impacts to Green Manufacturing. On top of that, this paper also discuss the benefits of applying Fit manufacturing and Green manufacturing in industrial as well as environment. Hence, applications of Fit manufacturing and Green Manufacturing are increasing year by year.

International cooperation

International Nuclear Information System (INIS)

2008-01-01

In this chapter international cooperation of the Division for Radiation Safety, NPP Decommissioning and Radwaste Management of the VUJE, a. s. is presented. Very important is cooperation with the International Atomic Energy Agency. This cooperation has various forms - national and regional projects of technical cooperation, coordinated research activities, participation of our experts in preparation of the IAEA documentation etc.

Frequency Arrangement For 700 MHz Band

Directory of Open Access Journals (Sweden)

Ancans G.

2015-02-01

Full Text Available The 694-790 MHz (700 MHz band was allocated by the 2012 World Radiocommunication Conference (WRC-12 in ITU Region 1 (Europe included, to the mobile service on a co-primary basis with other services to which this band was allocated on the primary basis and identified for the International Mobile Telecommunications (IMT. At the same time, the countries of Region 1 will be able also to continue using these frequencies for their broadcasting services if necessary. This allocation will be effective immediately after 2015 World Radiocommunication Conference (WRC-15. In order to make the best possible use of this frequency band for mobile service, a worldwide harmonized frequency arrangement is to be prepared to allow for large economies of scale and international roaming as well as utilizing the available spectrum in the best possible way, minimizing possible interference between services, facilitating deployment and cross-border coordination. The authors analyze different possible frequency arrangements and conclude on the frequency arrangement most suitable for Europe.

Imaging arrangement and microscope

Science.gov (United States)

Pertsinidis, Alexandros; Chu, Steven

2015-12-15

An embodiment of the present invention is an imaging arrangement that includes imaging optics, a fiducial light source, and a control system. In operation, the imaging optics separate light into first and second tight by wavelength and project the first and second light onto first and second areas within first and second detector regions, respectively. The imaging optics separate fiducial light from the fiducial light source into first and second fiducial light and project the first and second fiducial light onto third and fourth areas within the first and second detector regions, respectively. The control system adjusts alignment of the imaging optics so that the first and second fiducial light projected onto the first and second detector regions maintain relatively constant positions within the first and second detector regions, respectively. Another embodiment of the present invention is a microscope that includes the imaging arrangement.

Spiral phyllotaxis underlies constrained variation in Anemone (Ranunculaceae) tepal arrangement.

Science.gov (United States)

Kitazawa, Miho S; Fujimoto, Koichi

2018-05-01

Stabilization and variation of floral structures are indispensable for plant reproduction and evolution; however, the developmental mechanism regulating their structural robustness is largely unknown. To investigate this mechanism, we examined positional arrangement (aestivation) of excessively produced perianth organs (tepals) of six- and seven-tepaled (lobed) flowers in six Anemone species (Ranunculaceae). We found that the tepal arrangement that occurred in nature varied intraspecifically between spiral and whorled arrangements. Moreover, among the studied species, variation was commonly limited to three types, including whorls, despite five geometrically possible arrangements in six-tepaled flowers and two types among six possibilities in seven-tepaled flowers. A spiral arrangement, on the other hand, was unique to five-tepaled flowers. A spiral phyllotaxis model with stochasticity on initiating excessive primordia accounted for these limited variations in arrangement in cases when the divergence angle between preexisting primordia was less than 144°. Moreover, interspecific differences in the frequency of the observed arrangements were explained by the change of model parameters that represent meristematic growth and differential organ growth. These findings suggest that the phyllotaxis parameters are responsible for not only intraspecific stability but interspecific difference of floral structure. Decreasing arrangements from six-tepaled to seven-tepaled Anemone flowers demonstrate that the stabilization occurs as development proceeds to increase the component (organ) number, in contrast from the intuition that the variation will be larger due to increasing number of possible states (arrangements).

Scientific programme and manufacture of types DK-1 and DK-2 diagnostic assemblies

International Nuclear Information System (INIS)

Krett, V.; Kott, J.; Vlcek, J.; Mlady, Z.

1980-01-01

The programme is described of measurements to be effected on the Rheinsberg WWER-2 reactor using diagnostic assemblies DK-1 and DK-2. The DK-1 assemblies were manufactured in the USSR and tested in the big water loop at SKODA Works. The insertion of the assemblies in the reactor is being prepared. The DK-2 assemblies are developed by SKODA Works in cooperation with the USSR, Hungary and Poland. (Ha)

Friendship Repertoires and Care Arrangement: A Praxeological Approach.

Science.gov (United States)

Hahmann, Julia

2017-01-01

Friends are important companions and serve as sources for diverse dimensions of social support, including elderly care. Rather than researching populations that have already established care arrangements including friends, the author seeks to understand relationship systems with a focus on the inner logic friendship to consequently describe and understand involved care arrangements, be it with family members or friends. To illustrate the diversity of friendship repertoires, qualitative interviews with older adult Germans are analyzed regarding cognitive concepts of friendships in contrast to familiar ties as well as social practices around relationship systems. While some repertoires successfully include chosen ties in their care arrangements, others not only focus on family, they do not wish to receive care from friends. The article's praxeological approach highlights the need to reflect habitual differences when thinking about elderly informal care arrangements. © The Author(s) 2016.

Cable support arrangements

International Nuclear Information System (INIS)

Pendleton, E.; Murray, A.

1983-01-01

A cable support arrangement extending from a refuelling level floor of a nuclear reactor to the inner shield of a double rotatable shield comprises a linearly extensible cable support and disciplining boom, reaching from the floor to the main shield, and a circumferentially extensible cable support and disciplining means running from the end of the boom to a fixed end on the inner shield. (author)

Ulysses arrangements in psychiatry: a matter of good care?

Science.gov (United States)

Gremmen, I; Widdershoven, G; Beekman, A; Zuijderhoudt, R; Sevenhuijsen, S

2008-02-01

This article concerns the issue of how an ethic of care perspective may contribute to both normative theory and mental health care policy discussions on so called Ulysses arrangements, a special type of advance directives in psychiatry. The debate on Ulysses arrangements has predominantly been waged in terms of autonomy conceived of as the right to non-intervention. On the basis of our empirical investigations into the experiences of persons directly involved with Ulysses arrangements, we argue that a care ethics perspective may broaden and deepen the debate on Ulysses arrangements, by introducing additional concepts, such as vulnerability, responsibility and mutuality, and by refining familiar concepts, such as autonomy.

Employment arrangement, job stress, and health-related quality of life.

Science.gov (United States)

Ray, Tapas K; Kenigsberg, Tat'Yana A; Pana-Cryan, Regina

2017-12-01

We aimed to understand the characteristics of U.S. workers in non-standard employment arrangements, and to assess associations between job stress and Health-related Quality of Life (HRQL) by employment arrangement. As employers struggle to stay in business under increasing economic pressures, they may rely more on non-standard employment arrangements, thereby increasing the pool of contingent workers. Worker exposure to job stress may vary by employment arrangement. Excessive exposure to stressors at work is considered to be a potential health hazard, and may adversely affect health and HRQL. We used the Quality of Worklife (QWL) module which supplemented the General Social Survey (GSS) in 2002, 2006, 2010, and 2014. GSS is a biannual, nationally representative cross-sectional survey of U.S. households that yields a representative sample of the civilian, non-institutionalized, English-speaking, U.S. adult population. The QWL module assesses an array of psychosocial working conditions and quality of work life topics among GSS respondents. We used pooled QWL responses from 2002 to 2014 by only those who reported being employed at the time of the survey. After adjusting for sampling probabilities, including subsampling for non-respondents and correcting for the number of adults in the household, 6005 respondents were included in our analyses. We grouped respondents according to their employment arrangement, including: (i) independent contractors (contractor), (ii) on call workers (on call), (iii) workers paid by a temporary agency (temporary), (iv) workers who work for a contractor (under contract), or (v) workers in standard employment arrangements (standard). Respondents were further grouped into those who were stressed and those who were not stressed at work. Descriptive population prevalence rates were calculated by employment arrangement for select demographic and organizational characteristics, psychosocial working conditions, work-family balance, and health and

IPAD: A unique approach to government/industry cooperation for technology development and transfer

Science.gov (United States)

Fulton, Robert E.; Salley, George C.

1985-01-01

A key element to improved industry productivity is effective management of Computer Aided Design / Computer Aided Manufacturing (CAD/CAM) information. To stimulate advancement, a unique joint government/industry project designated Integrated Programs for Aerospace-Vehicle Design (IPAD) was carried out from 1971 to 1984. The goal was to raise aerospace industry productivity through advancement of computer based technology to integrate and manage information involved in the design and manufacturing process. IPAD research was guided by an Industry Technical Advisory Board (ITAB) composed of over 100 representatives from aerospace and computer companies. The project complemented traditional NASA/DOD research to develop aerospace design technology and the Air Force's Integrated Computer Aided Manufacturing (ICAM) program to advance CAM technology. IPAD had unprecedented industry support and involvement and served as a unique approach to government industry cooperation in the development and transfer of advanced technology. The IPAD project background, approach, accomplishments, industry involvement, technology transfer mechanisms and lessons learned are summarized.

Regional long-term co-operation in the field of nuclear and radiation emergency preparedness

International Nuclear Information System (INIS)

Sladek, V.; Metke, E.; Janko, K.; Hohenberg, J. K.; Hofer, P.

2004-01-01

Emergency preparedness is generally covered by methodical and coordinative activities of the International Atomic Energy Agency (IAEA) in Member States of the IAEA and by the European Commission (EC) in EU Member and EU Accession Countries. However, the regional harmonisation of emergency arrangements is an important trend of emergency preparedness. The present paper gives a couple of illustrative examples for a regional co-operation in the field of emergency preparedness in Central Europe and an overview on international exercises in this region. The penultimate section contains an outlook on future activities regarding regional co-operation in Central Europe. The following topics have been suggested inter alia: the harmonisation of intervention criteria and countermeasures, co-ordination in the field of information of the public, comprehensive bi lateral and multilateral exercises, exchange of experts between the national nuclear emergency centres and inter-comparison calculations of the computer codes. (authors)

Endogenous change: on cooperation and water availability in two ancient societies

Science.gov (United States)

Pande, S.; Ertsen, M.

2014-05-01

We propose and test the theory of endogenous change in societal institutions based on historical reconstructions of two ancient civilizations, the Indus and Hohokam, in two water-scarce basins, the Indus Basin in the Indian subcontinent and the lower Colorado Basin in the southwestern United States. In our reconstructions, institutions are approximated by the scale of "cooperation", be it in the form of the extent of trade, sophisticated irrigation networks, a central state or a loosely held state with a common cultural identity. We study changes in institutions brought about by changes in factors like rainfall, population density, and land-use-induced water resource availability, in a proximate manner. These factors either change naturally or are changed by humans; in either case we contend that the changes affect the stability of cooperative structures over time. We relate the quantitative dimensions of water access by ancient populations to the co-evolution of water access and the socioeconomic and sociopolitical organizations. In doing so, we do not claim that water manipulation was the single most significant factor in stimulating social development and complexity - this would be highly reductionist. Nonetheless, we provide a discussion with the aim to enhance our understanding of the complexity of coupled human-hydrological systems. We find that scarcity triggered more complex cooperative arrangements in both Indus and Hohokam societies.

Effects of array arrangements in nano-patterned thin film media

International Nuclear Information System (INIS)

El-Hilo, M.

2010-01-01

In this work, the effect of different arrays arrangements on the magnetic behaviour of patterned thin film media is simulated. The modeled films consist of 80x80 cobalt grains of uniform diameter (20 nm) distributed into two different array arrangement: hexagonal (triangular) or square arrays. In addition to that, for each array arrangement, two cases of anisotropy orientations, random and textured films are considered. For both array arrangements and media orientations, hysteresis loops at different array separation (d) were simulated. Predictions show that for closely packed films, the shearing effects on the magnetization loop are much larger for the square array arrangement than the hexagonal one. According to these predictions, the bit switching field distribution in interacting 2D systems is much narrower for the hexagonal array arrangement. This result could be very important for high-density magnetic recording where a narrow bit switching field distribution is required.

Protocol for X-ray dosimetry and exposure arrangements employed in studies of late somatic effects in mammals

International Nuclear Information System (INIS)

Zoetelief, J.; Kogel, A.J. van der; Broerse, J.J.; Scarpa, G.; Dixon-Brown, A.

1985-01-01

A number of European laboratories studying the late effects of ionizing radiation in animals have established an effective cooperation within the European Late Effects Project Group (EULEP) since 1970. To facilitate the exchange of biological results several techniques, including quality control of the experimental animals, pathology and dosimetry, have to be standardized. The most important aspects of the procedures for X-irradiation and dosimetry of small animals are summarized. These include recommendations on irradiation conditions, dosimetry methods, characteristics of phantoms and factors affecting X-ray dosimetry. X-irradiation procedures employed by the participating institutes are described and the results of five X-ray dosimetry intercomparisons are reported. The introduction of a common dosimetry protocol has resulted in improvements in exposure arrangements and absolute dosimetry. (author)

International Cooperation of the Republic of Croatia in the Field of Radiological and Nuclear Safety

International Nuclear Information System (INIS)

Novosel, N.

2011-01-01

International cooperation of the Republic of Croatia in the field of radiological and nuclear safety can be divided in two parts - political part, for which the Ministry of Foreign Affairs and European Integration is responsible, and technical part, for which the State Office for Radiological and Nuclear Safety is responsible. According to the Radiological and Nuclear Safety Act (OG 28/10) the State Office for Radiological and Nuclear Safety: ''coordinates technical cooperation with the International Atomic Energy Agency for all participants from the Republic of Croatia''; ''fulfils the obligations which the Republic of Croatia has assumed through international conventions and bilateral agreements concerning protection against ionising radiation, nuclear safety and the application of protective measures aimed at the non-proliferation of nuclear weapons'' and ''cooperates with international and domestic organisations and associations in the area of protection against ionising radiation and nuclear safety, and appoints its own expert representatives to take part in the work of such organisations and associations or to monitor their work''. In this paper various aspects of the technical cooperation with the International Atomic Energy Agency, as well as international conventions and bilateral agreements in the field of radiological and nuclear safety, are presented. Also, cooperation with other international organizations and associations in the area of radiological and nuclear safety, such as Nuclear Suppliers Group, the Zangger Committee, the Wassenaar Arrangement, Comprehensive Nuclear-Test-Ban Treaty Organization, Euratom and certain civil expert groups of NATO, is described. (author)

FY 1998 survey report on the feasibility study of environmental cooperation in environmental protection technology, system, etc. for spread to developing countries; 1998 nendo kankyo taisaku gijutsu seidonado no tojokoku fukyu ni kakawaru kankyo kyoryoku kanosei chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The paper arranged the present situation and the problems of environmental cooperation for developing countries, and studied based thereon how to cooperate in environmental protection for developing countries in the future. At the same time, it arranged the problems/subjects posed when environment-related companies in Japan try to transfer environmental technology to developing countries, for the purpose of using them as data in studying possibility of reviewing the environmental cooperation presently conducted. A view on environmental cooperation is that as security of mankind, it is necessary to help developing countries in technology/knowledge/fund. However, a trial calculation indicated that the initial investment of 11.1 trillion yen is needed only for desulfurization and water treatment in China and ASEAN countries. Such a huge amount of money cannot be paid at all even by developed countries. As the support of environmental protection measures, the one also including energy and resource is needed. Further, the support of environmental protection measures should be the one that has the exhibition effect and influential effect, promotes efforts of developing countries' own, and pushes independent environmental measures forward. From this point of view, a study was made on what the details of the environmental cooperation should be like. (NEDO)

Emotional Intelligence and Organisational Citizenship Behaviour of Manufacturing Sector Employees: An Analysis

Directory of Open Access Journals (Sweden)

Susan Tee Suan Chin

2011-06-01

Full Text Available As with diversity, collaboration, co-operation and teamwork havebecome increasingly important issues for management to handle.The purpose of this study is to analyse the level of Emotional Intelligenceand Organisational Citizenship Behaviour among middlemanagement employees in the Malaysian manufacturing sector.A total of 536 employees from different organisations and industriestook part in this survey. Based on the descriptive analysis,employees in some industries tended to have a lower level ofemotional intelligence and organisational citizenship behaviour.

Creating Value for Customer in Business Networks of High-Tech Goods Manufacturers

Directory of Open Access Journals (Sweden)

Joanna Wiechoczek

2016-01-01

Full Text Available The main paper goal is to recognize the category of value for customer with respect to high-tech products, and to propose a model of creation of this value in business networks established by manufacturers. The research methods include critical analysis of the literature, documentation method, as well as the case research method and observation method. The results of the research proved that the value offered to buyers is characterized by growing multidimensionality which results in increasing complexity of the creation process of this value by their manufacturers. Due to the fact that they do not have complex skills and resources to create the value independently, they form business networks. These networks include increasingly larger group of entities, in which the importance of individual cooperants is highly diversified.

Non-cooperative game theory in biology and cooperative reasoning in humans.

Science.gov (United States)

Kabalak, Alihan; Smirnova, Elena; Jost, Jürgen

2015-06-01

The readiness for spontaneous cooperation together with the assumptions that others share this cooperativity has been identified as a fundamental feature that distinguishes humans from other animals, including the great apes. At the same time, cooperativity presents an evolutionary puzzle because non-cooperators do better in a group of cooperators. We develop here an analysis of the process leading to cooperation in terms of rationality concepts, game theory and epistemic logic. We are, however, not attempting to reconstruct the actual evolutionary process. We rather want to provide the logical structure underlying cooperation in order to understand why cooperation is possible and what kind of reasoning and beliefs would lead to cooperative decision-making. Game theory depends on an underlying common belief in non-cooperative rationality of the players, and cooperativity similarly can utilize a common belief in cooperative rationality as its basis. We suggest a weaker concept of rational decision-making in games that encompasses both types of decision-making. We build this up in stages, starting from simple optimization, then using anticipation of the reaction of others, to finally arrive at reflexive and cooperative reasoning. While each stage is more difficult than the preceding, importantly, we also identify a reduction of complexity achieved by the consistent application of higher stage reasoning.

Designing for cooperation - cooperating in design

DEFF Research Database (Denmark)

Kyng, Morten

1991-01-01

This article will discuss how to design computer applications that enhance the quality of work and products, and will relate the discussion to current themes in the field of Computer-Supported Cooperative Work (CSCW). Cooperation is a key element of computer use and work practice, yet here...... a specific "CSCW approach is not taken." Instead the focus is cooperation as an important aspect of work that should be integrated into most computer support efforts in order to develop successful computer support, however, other aspects such as power, conflict and control must also be considered....

Optimal support arrangement of piping systems using genetic algorithm

International Nuclear Information System (INIS)

Chiba, T.; Okado, S.; Fujii, I.; Itami, K.

1996-01-01

The support arrangement is one of the important factors in the design of piping systems. Much time is required to decide the arrangement of the supports. The authors applied a genetic algorithm to find the optimum support arrangement for piping systems. Examples are provided to illustrate the effectiveness of the genetic algorithm. Good results are obtained when applying the genetic algorithm to the actual designing of the piping system

Relationship outcomes in Indian-American love-based and arranged marriages.

Science.gov (United States)

Regan, Pamela C; Lakhanpal, Saloni; Anguiano, Carlos

2012-06-01

The meaning and purpose of marriage, and the manner in which spouses are selected, varies across cultures. Although many cultures have a tradition of arranged marriage, researchers interested in marital dynamics generally have focused on love-based marriages. Consequently, there is little information on relational outcomes within arranged marriages. This study compared relationship outcomes in love-based and arranged marriages contracted in the U.S. A community sample of 58 Indian participants living in the U.S. (28 arranged marriages, 30 love-based marriages) completed measures of marital satisfaction, commitment, companionate love, and passionate love. Men reported greater amounts of commitment, passionate love, and companionate love than women. Unexpectedly, no differences were found between participants in arranged and love-based marriages; high ratings of love, satisfaction, and commitment were observed in both marriage types. The overall affective experiences of partners in arranged and love marriages appear to be similar, at least among Indian adults living in contemporary U.S. society.

A simple model of bipartite cooperation for ecological and organizational networks.

Science.gov (United States)

Saavedra, Serguei; Reed-Tsochas, Felix; Uzzi, Brian

2009-01-22

In theoretical ecology, simple stochastic models that satisfy two basic conditions about the distribution of niche values and feeding ranges have proved successful in reproducing the overall structural properties of real food webs, using species richness and connectance as the only input parameters. Recently, more detailed models have incorporated higher levels of constraint in order to reproduce the actual links observed in real food webs. Here, building on previous stochastic models of consumer-resource interactions between species, we propose a highly parsimonious model that can reproduce the overall bipartite structure of cooperative partner-partner interactions, as exemplified by plant-animal mutualistic networks. Our stochastic model of bipartite cooperation uses simple specialization and interaction rules, and only requires three empirical input parameters. We test the bipartite cooperation model on ten large pollination data sets that have been compiled in the literature, and find that it successfully replicates the degree distribution, nestedness and modularity of the empirical networks. These properties are regarded as key to understanding cooperation in mutualistic networks. We also apply our model to an extensive data set of two classes of company engaged in joint production in the garment industry. Using the same metrics, we find that the network of manufacturer-contractor interactions exhibits similar structural patterns to plant-animal pollination networks. This surprising correspondence between ecological and organizational networks suggests that the simple rules of cooperation that generate bipartite networks may be generic, and could prove relevant in many different domains, ranging from biological systems to human society.

Bilateral cooperation and technology transfer between France and China at Daya-Bay, Qinshan II and Yibin

International Nuclear Information System (INIS)

Ma Fubanf; Zenf Wenxing; He Jiacheng; Charbonneau, S.; Darolles, J.F.; Ellia, G.; Freslon, H.

1994-01-01

The Daya-Bay nuclear power station in Guangdong Province, The Qinshan phase II nuclear power station in Zhejiang Province, and the fuel manufacturing facility at Yibin in Sichuan Province have all afforded Framatome the opportunity to develop wide-ranging bilateral cooperation and technology transfer with the People's Republic of china. These projects are all good examples of how a country with some nuclear power experience, such as the now-operating Qinshan 1 (300 M We) nuclear power unit designed and build by China itself, can make much more rapid progress in its civil nuclear power program through cooperation with an industry leader, such as Framatome

European top managers’ support for work-life arrangements

NARCIS (Netherlands)

Been, Wike M.; van der Lippe, Tanja; den Dulk, Laura; Das Dores Horta Guerreiro, Maria; Kanjuo Mrčela, Aleksandra; Niemistö, Charlotta

2017-01-01

Top managers—defined as CEOs, CFOs and members of boards of directors—decide to what degree their organization offers employees work-life arrangements. This study focuses on the conditions under which they support such arrangements. A factorial survey of 202 top managers in five European countries

46 CFR 199.245 - Survival craft embarkation and launching arrangements.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft embarkation and launching arrangements... Passenger Vessels § 199.245 Survival craft embarkation and launching arrangements. (a) Each davit-launched liferaft must be arranged to be rapidly boarded by its full complement of persons. (b) All survival craft...

"In the same boat": considerations on the partnership between healthcare providers and manufacturers of health IT products and medical devices.

Science.gov (United States)

Bergh, B

2009-01-01

To assess the current culture of cooperation between healthcare providers (HCPs) and the healthcare industry (HCI) in the domain of Health-IT and Engineering (HITE) and identify possible strategies for improvement. Based on reports in the literature and personal experience, major challenges were identified, the current ways of cooperation defined and their relation to each other analyzed. Four main challenges were identified for both sides involving: products and functionality, integration of IT-Systems with each other and with medical devices, usability, visions and strategic management. None of the four defined cooperation categories cover all aspects of the challenges, but cooperation in small, dedicated groups appeared to provide the most advantages. An increased participation of HCPs in standardization activities is crucial either directly or indirectly via professional or scientific organizations. Cooperation between provider management (hospitals, clinics or systems) and manufacturers of health IT products will be the key factor for success of the HCI while providing substantial benefits for providers. Both sides should invest heavily in such efforts.

Recurring part arrangements in shape collections

KAUST Repository

Zheng, Youyi; Cohen-Or, Daniel; Averkiou, Melinos; Mitra, Niloy J.

2014-01-01

Extracting semantically related parts across models remains challenging, especially without supervision. The common approach is to co-analyze a model collection, while assuming the existence of descriptive geometric features that can directly identify related parts. In the presence of large shape variations, common geometric features, however, are no longer sufficiently descriptive. In this paper, we explore an indirect top-down approach, where instead of part geometry, part arrangements extracted from each model are compared. The key observation is that while a direct comparison of part geometry can be ambiguous, part arrangements, being higher level structures, remain consistent, and hence can be used to discover latent commonalities among semantically related shapes. We show that our indirect analysis leads to the detection of recurring arrangements of parts, which are otherwise difficult to discover in a direct unsupervised setting. We evaluate our algorithm on ground truth datasets and report advantages over geometric similarity-based bottom-up co-segmentation algorithms. © 2014 The Author(s) Computer Graphics Forum © 2014 The Eurographics Association and John Wiley & Sons Ltd. Published by John Wiley & Sons Ltd.

Recurring part arrangements in shape collections

KAUST Repository

Zheng, Youyi

2014-05-01

Extracting semantically related parts across models remains challenging, especially without supervision. The common approach is to co-analyze a model collection, while assuming the existence of descriptive geometric features that can directly identify related parts. In the presence of large shape variations, common geometric features, however, are no longer sufficiently descriptive. In this paper, we explore an indirect top-down approach, where instead of part geometry, part arrangements extracted from each model are compared. The key observation is that while a direct comparison of part geometry can be ambiguous, part arrangements, being higher level structures, remain consistent, and hence can be used to discover latent commonalities among semantically related shapes. We show that our indirect analysis leads to the detection of recurring arrangements of parts, which are otherwise difficult to discover in a direct unsupervised setting. We evaluate our algorithm on ground truth datasets and report advantages over geometric similarity-based bottom-up co-segmentation algorithms. © 2014 The Author(s) Computer Graphics Forum © 2014 The Eurographics Association and John Wiley & Sons Ltd. Published by John Wiley & Sons Ltd.

29 CFR 794.117 - Effect of franchises and other arrangements.

Science.gov (United States)

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Effect of franchises and other arrangements. 794.117... âindependently Owned and Controlled Local Enterpriseâ § 794.117 Effect of franchises and other arrangements. Whether a franchise or other contractual arrangement affects the status of the enterprise as “an...

Inspection of Emergency Arrangements

International Nuclear Information System (INIS)

2013-01-01

The Working Group on Inspection Practices (WGIP) was tasked by the NEA CNRA to examine and evaluate the extent to which emergency arrangements are inspected and to identify areas of importance for the development of good inspection practices. WGIP members shared their approaches to the inspection of emergency arrangements by the use of questionnaires, which were developed from the requirements set out in IAEA Safety Standards. Detailed responses to the questionnaires from WGIP member countries have been compiled and are presented in the appendix to this report. The following commendable practices have been drawn from the completed questionnaires and views provided by WGIP members: - RBs and their Inspectors have sufficient knowledge and information regarding operator's arrangements for the preparedness and response to nuclear emergencies, to enable authoritative advice to be given to the national coordinating authority, where necessary. - Inspectors check that the operator's response to a nuclear emergency is adequately integrated with relevant response organisations. - Inspectors pay attention to consider the integration of the operator's response to safety and security threats. - The efficiency of international relations is checked in depth during some exercises (e.g. early warning, assistance and technical information), especially for near-border facilities that could lead to an emergency response abroad. - RB inspection programmes consider the adequacy of arrangements for emergency preparedness and response to multi-unit accidents. - RBs assess the adequacy of arrangements to respond to accidents in other countries. - The RB's role is adequately documented and communicated to all agencies taking part in the response to a nuclear or radiological emergency. - Inspectors check that threat assessments for NPPs have been undertaken in accordance with national requirements and that up-to-date assessments have been used as the basis for developing emergency plans for

Arrangement of Renal Arteries in Guinea Pig.

Science.gov (United States)

Mazensky, David; Flesarova, Slavka

2017-03-01

The aim of this study was to describe origin, localization, and variations of renal arteries in guinea pig. The study was carried out on 26 adult guinea pigs. We prepared corrosion casts of the guinea pig arterial system. Batson's corrosion casting kit no. 17 was used as the casting medium. In 57.7% of specimens, a. renalis dextra was present as a single vessel with different level of its origin from aorta abdominalis. In 38.5% of specimens, two aa. renales dextrae were present with variable origin and arrangement. The presence of three aa. renales dextrae we found in one specimen. In 76.9% of specimens, a. renalis sinistra was present as a single vessel with different level of its origin from aorta abdominalis and variable arrangement. In 23.1% of specimens, we found two aa. renales sinistrae with variable origin and arrangement. The anatomical knowledge of the renal arteries, and its variations are of extreme importance for the surgeon that approaches the retroperitoneal region in several experiments, results of which are extrapolated in human. This is the first work dealing with the description of renal arteries arrangement in guinea pig. Anat Rec, 300:556-559, 2017. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

29 CFR 779.230 - Franchise and other arrangements.

Science.gov (United States)

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Franchise and other arrangements. 779.230 Section 779.230... Coverage Leased Departments, Franchise and Other Business Arrangements § 779.230 Franchise and other.... The quotation in § 779.229 from the Senate Report shows that Congress recognized that some franchise...

NATO Advanced Research Institute on the Efficiency of Manufacturing Systems

CERN Document Server

Berg, C; French, D

1983-01-01

The Advanced Research Institute (A.R. 1.) on "the efficiency of Manufacturing Systems" was held under the auspices of the NATO Special Programm~ Panel on Systems Science as a part of the NATO Science Committee's continuous effort to promote the advancement of science through international co-operation. Advanced Research Institutes are organised for the purpose of bringing together experts in a particular field of interest to identify and make known the present state of knowledge in that area and, through informed debate, to make recommendations for directions for future research that would benefit the community at large. To this end two kinds of contribution were obtained by invitation. There were those papers which were about the current state of work in the area of manufacturing systems and its organisation; in addition three theme papers were presented to provide a stimulus to the discussion in terms of ways of thinking, both about the area and about the kind of research needed.

Latin-American Co-operation in Biotechnology Programme: Industrial penicillin amidase for 6 amino penicillanic acid production

Directory of Open Access Journals (Sweden)

Dolly Montoya C.

2001-07-01

Full Text Available This work evaluates technological and economic transference related to the Production of Penicillin Amidase for use in 6 Amine Penicillanic acid (6-APA Production Project, wich is a part of the United Nations1 Regional Biotechnology Programme for Latin America and the Caribbean. This paper analyses the evolution of international cooperation by looking at the project's development. The methodology used includes analysis of: the project's development; participant and budgetary goals; results; copyright; project conditions; and sale of biocatalyst and 6-APA. All technical objectives were achieved; international co-operation, as well as co-operation between Industry and University were successful. Technological transference to the pilot plant was effective; many students involved in the project were simultaneously taking M.Sc. and Ph.D's courses. Nevertheless, neither the technology necessary for the biocatalyst's manufacture nor the biocatalyst itself were used. Analysis of the project has provided some orientation concerning those internal and external problems which arose during the development and sale of biotechnology in our countries and has tried to propose some alternatives for taking advantage of international co-operation.

Performing Ecosystem Services at Mud Flats in Seocheon, Korea: Using Q Methodology for Cooperative Decision Making

Directory of Open Access Journals (Sweden)

Jae-Hyuck Lee

2017-05-01

Full Text Available The concept of ecosystem services, which are the direct and indirect benefits of nature to humans, has been established as a supporting tool to increase the efficiency in decision-making regarding environmental planning. However, preceding studies on decision-making in relation to ecosystem services have been limited to identifying differences in perception, whereas few studies have reported cooperative alternatives. Therefore, this study aimed to present a method for cooperative decision-making among ecosystem service stakeholders using Q methodology. The results showed three perspectives on ecosystem services of small mud flat areas: ecological function, ecotourism, and human activity. The perspectives on cultural services and regulating services were diverse, whereas those on supporting services were similar. Thus, supporting services were considered crucial for the cooperative assessment and management of small mud flat ecosystems as well as for the scientific evaluation of regulating services. Furthermore, this study identified practical implementation measures to increase production through land management, to manufacture related souvenirs, and to link them to ecotourism. Overall, our results demonstrated the ideal process of cooperative decision-making to improve ecosystem services.

People management implications of virtual workplace arrangements

OpenAIRE

K. Ortlepp; X. Hloma

2006-01-01

Purpose: The purpose of this paper is to investigate the factors that led to an organisation implementing a particular form of virtual workplace arrangement, namely, home-based work. The benefits and disadvantages associated with this form of work arrangement are explored from both the managers' and home-based employees' perspectives. Design/Methodology/Approach: Given the exploratory nature of the empirical study on which this paper is based, a qualitative research design was adopt...

Educational Effects and Problems on Cooperative Education for Training Practical Engineer at Anan National College of Technology

Science.gov (United States)

Harano, Tomoki; Yoshimura, Hiroshi; Yasuno, Emiko; Uehara, Nobutomo

The first author has devised the new cooperative education program to adopt the curricula at Colleges of Technology in Japan. The program consists of the practical work programs at manufacturing industries for three weeks and two weeks in every summer and spring vacation at third to fourth grade year, to enhance the communication skill, and to acquire the practical manufacturing technology and so on. In addition, the program has the practical design project of the manufacturing industry to cultivate the problem-solving skill for the fifth grade students at last. The program has many participants that are forty industry companies and seventy students in successfully. It is found that the program is to enhance the communication skill, writing skill and self-confident as a practical engineer by the iterative work.

Living Arrangements and Suicidal Ideation among the Korean Elderly

Science.gov (United States)

Kim, Jibum; Lee, Yun-Suk; Lee, Jinkook

2016-01-01

Objectives This study examines how living arrangements are associated with suicidal ideation for older adults in South Korea, which has the highest suicide rate among OECD countries, and a particularly high suicide rate for older persons. Methods Analyzing a sample of 5,795 women and 3,758 men aged 65 and older from a nationwide representative cross-sectional data set, we examined how many older adults think about suicide over a one-year period, why they think about suicide, and whether living arrangements are associated with suicidal ideation. Results About one out of twelve respondents in our sample reported suicidal ideation. While women and men did not differ in the prevalence of suicidal ideation, women attributed their suicidal feelings to health problems, while men attributed theirs to economic difficulties. Logistic regression results indicated that living arrangements are associated with suicidal ideation for men but not women. Older men living with a spouse were less likely to have suicidal ideation than older men with other living arrangements (i.e., living alone, living with children without spouse, living with spouse and others). Conclusions Our results highlight the importance of living arrangements to older men’s suicidal ideation. We discuss gender differences in the implications of living arrangements to suicidal ideation within the context of Confucian culture. PMID:26317145

Cooperation or Competition? Channel Choice for a Remanufacturing Fashion Supply Chain with Government Subsidy

Directory of Open Access Journals (Sweden)

Kangzhou Wang

2014-10-01

Full Text Available In this paper, we address the problem of choosing an appropriate channel for the marketing channel structure of remanufactured fashion products. To be specific, we consider a remanufacturer who has two options for selling the products: (1 provide the remanufactured products to a manufacturer, then the manufacturer sells both new products and the remanufactured products to customers, and (2 sell the remanufactured products directly to customers. Because of the relatively low acceptance of remanufactured products and environment consciousness of customers in developing countries like China, we model the two scenarios as decentralized remanufacturing supply chains, with the manufacturer being the Stackelberg leader and the government offering subsidy to the remanufacturer to incentivize remanufacturing activities. We find that the subsidy can incentivize remanufacturing activity regardless of the remanufacturer’s channel choice. A “too high” or “too low” subsidy makes the remanufacturer compete with the manufacturer, and an intermediate subsidy results in cooperation between the two members of the remanufacturing supply chain. Meanwhile, if the customers’ acceptance for remanufactured products is higher, the remanufacturer will be more likely to compete with the manufacturer. However, the remanufacturer’s optimal channel choice may be inefficient in the sense of social welfare and environmental protection.

An Integrated Model for Supplier Selection for a High-Tech Manufacturer

Science.gov (United States)

Lee, Amy H. I.; Kang, He-Yau; Lin, Chun-Yu

2011-11-01

Global competitiveness has become the biggest concern of manufacturing companies, especially in high-tech industries. Improving competitive edges in an environment with rapidly changing technological innovations and dynamic customer needs is essential for a firm to survive and to acquire a decent profit. Thus, the introduction of successful new products is a source of new sales and profits and is a necessity in the intense competitive international market. After a product is developed, a firm needs the cooperation of upstream suppliers to provide satisfactory components and parts for manufacturing final products. Therefore, the selection of suitable suppliers has also become a very important decision. In this study, an analytical approach is proposed to select the most appropriate critical-part suppliers in order to maintain a high reliability of the supply chain. A fuzzy analytic network process (FANP) model, which incorporates the benefits, opportunities, costs and risks (BOCR) concept, is constructed to evaluate various aspects of suppliers. The proposed model is adopted in a TFT-LCD manufacturer in Taiwan in evaluating the expected performance of suppliers with respect to each important factor, and an overall ranking of the suppliers can be generated as a result.

FY 2000 report on the research cooperation project on the research cooperative follow-up for development of the manufacturing technology supported by advanced and integrated information system through cooperation; 2000 nendo kenkyu kyoryoku jigyo. 2000 nendo kan'i sosagata denshi sekkei seisan shien system no kaihatsu ni kansuru kenkyu kyoryoku follow up jigyo hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The manufacturing technology supported by advanced and integrated information system through cooperation (MATIC), that is, a project supporting the production technology including the international information system and CAD/CAM system, etc. was carried out from FY 1994 to FY 1998. From FY 1999, the follow-up project is being implemented for the spread of the MATIC results, support for the independent R and D and the technical guidance. China, Indonesia, Malaysia and Singapore participated in this project, by which the support and technical guidance were given in three fields: automobiles/the parts; household electric appliances/the parts; fiber/apparel. At present, each country is continuing its own activity for using the system developed in the MATIC project in its country. In this fiscal year, researchers were sent to each country for supporting the activities. Further, the MATIC follow-up committee was established to conduct the drawing-up of a business plan, grasp of the state of the spread/R and D, discussion about problems/subjects, comprehensive evaluation of the MATIC project, etc. (NEDO)

FY 2000 report on the research cooperation project on the research cooperative follow-up for development of the manufacturing technology supported by advanced and integrated information system through cooperation; 2000 nendo kenkyu kyoryoku jigyo. 2000 nendo kan'i sosagata denshi sekkei seisan shien system no kaihatsu ni kansuru kenkyu kyoryoku follow up jigyo hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The manufacturing technology supported by advanced and integrated information system through cooperation (MATIC), that is, a project supporting the production technology including the international information system and CAD/CAM system, etc. was carried out from FY 1994 to FY 1998. From FY 1999, the follow-up project is being implemented for the spread of the MATIC results, support for the independent R and D and the technical guidance. China, Indonesia, Malaysia and Singapore participated in this project, by which the support and technical guidance were given in three fields: automobiles/the parts; household electric appliances/the parts; fiber/apparel. At present, each country is continuing its own activity for using the system developed in the MATIC project in its country. In this fiscal year, researchers were sent to each country for supporting the activities. Further, the MATIC follow-up committee was established to conduct the drawing-up of a business plan, grasp of the state of the spread/R and D, discussion about problems/subjects, comprehensive evaluation of the MATIC project, etc. (NEDO)

Cooperation Models, Motivation and Objectives behind Farm–School Collaboration

DEFF Research Database (Denmark)

Dyg, Pernille Malberg; Mikkelsen, Bent Egberg

2016-01-01

economic incentives. Teachers display academic motives for engaging in farm visits, but also a broader focus on shaping children’s world views, connectedness to food and nature and fostering life skills. The farm can be an important setting for promoting food, agricultural and ecological literacy. We...... people and their ability to understand the food system. Thus, efforts are made to promote food literacy through strengthening of farm–school links. The case-study research from Denmark investigates existing cooperation arrangements in farm–school collaboration and the underlying motivation of the farmers...... and teachers. Findings show distinct differences in motivation. Farmers want to create transparency in their production, ensure support for the agricultural profession or promote food and agricultural literacy. The idealistic motivation of teaching children about food and agriculture weighs higher than...

BIRTHDAY CAKE ACTIVITY STRUCTURED ARRANGEMENT FOR HELPING CHILDREN DETERMINING QUANTITIES

Directory of Open Access Journals (Sweden)

Neni Mariana

2010-07-01

Full Text Available Few researches have been concerned about relation between children’s spatialthinking and number sense. Narrowing for this small research, we focused onone component of spatial thinking, that is structuring objects, and onecomponent of number senses, that is cardinality by determining quantities. Thisstudy focused on a design research that was conducted in Indonesia in which weinvestigated pre-school children’s (between 2 and 3.5 years old ability inmaking structured arrangement and their ability to determine the quantities bylooking at the arrangements. The result shows us that some of the children wereable to make such arrangement. However, the children found difficulties eitherto determine quantities from those arrangements or to compare some structuresto easily recognize number of objects.Keywords: structures, structured arrangement, cardinality DOI: http://dx.doi.org/10.22342/jme.1.1.790.53-70

International cooperation

International Nuclear Information System (INIS)

1996-01-01

In 1995, Nuclear Regulatory Authority of the Slovak Republic (NRA SR) ensured foreign cooperation particularly in the frame of the Slovak Republic is membership in the IAEA, as well as cooperation with the Nuclear Energy Agency of the Organization for Economic Cooperation and Development (OECD NEA), cooperation with European Union in the frame of PHARE programmes, and intergovernmental cooperation and cooperation among nuclear regulatory authorities. With respect to an international importance, prestige and a wide-scope possibilities of a technical assistance , either a direct one (expert assessments, technology supplies, work placement, scientific trips, training courses) or indirect one (participation at various conferences, seminars, technical committees, etc), the most important cooperation with the IAEA in Vienna. In 1994, the Slovak Republic, was elected to the Board Governors, the represent the group of Eastern European countries. The Slovak Government entrusted the NRA SR's Chairman with representing the Slovak Republic in the Board of Governors. Owing to a good name of Slovakia was elected to the one of two Vice-Chairmen of the Board of Governors at the 882-nd session on the Board. IAEA approved and developed 8 national projects for Slovakia in 1995. Generally, IAEA is contracting scientific contracts with research institutes, nuclear power plants and other organizations. Slovak organizations used these contracts as complementary funding of their tasks. In 1995, there were 12 scientific contracts in progress, or approved respectively. Other international activities of the NRA SR, international co-operations as well as foreign affairs are reported

Robot-based additive manufacturing for flexible die-modelling in incremental sheet forming

Science.gov (United States)

Rieger, Michael; Störkle, Denis Daniel; Thyssen, Lars; Kuhlenkötter, Bernd

2017-10-01

The paper describes the application concept of additive manufactured dies to support the robot-based incremental sheet metal forming process (`Roboforming') for the production of sheet metal components in small batch sizes. Compared to the dieless kinematic-based generation of a shape by means of two cooperating industrial robots, the supporting robot models a die on the back of the metal sheet by using the robot-based fused layer manufacturing process (FLM). This tool chain is software-defined and preserves the high geometrical form flexibility of Roboforming while flexibly generating support structures adapted to the final part's geometry. Test series serve to confirm the feasibility of the concept by investigating the process challenges of the adhesion to the sheet surface and the general stability as well as the influence on the geometric accuracy compared to the well-known forming strategies.

Social manufacturing

OpenAIRE

Hamalainen, Markko; Karjalainen, Jesse

2017-01-01

New business models harnessing the power of individuals have already revolutionized service industries and digital content production. In this study, we investigate whether a similar phenomenon is taking place in manufacturing industries. We start by conceptually defining two distinct forms of firm-individual collaboration in manufacturing industries: (1) social cloud manufacturing, in which firms outsource manufacturing to individuals, and (2) social platform manufacturing, in which firms pr...

Flexible time arrangements: relevance and impact of part-time work in Switzerland

OpenAIRE

Krone-Germann, Irenka

2010-01-01

In recent labour market history, one of the most striking features has been the increase of non-standard employment arrangements. These types of arrangements refer to atypical and alternative employment arrangements which are often called flexible staffing arrangements. The utilization of these flexible labour arrangements has been, however, the source of much controversy in the last twenty years but nowadays it is becoming more and more common in the OECD countries, more specifically in Swit...

Tests for manufacturing technology of disposal canisters for nuclear spent fuel

International Nuclear Information System (INIS)

Raiko, H.; Salonen, T.; Meuronen, I.; Lehto, K.

1999-06-01

The summary and status of the results of the manufacturing technology programmes concerning the disposal canister for spent nuclear fuel conducted by Posiva Oy are given in this report. Posiva has maintained a draft plan for a disposal canister design and an assessment of potential manufacturing technologies for about ten years in Finland. Now, during the year 1999, the first full scale demonstration canister is manufactured in Finland. The technology used for manufacturing of this prototype is developed by Posiva Oy mainly in co-operation with domestic industry. The main partner in developing the manufacturing technology for the copper shell has been Outokumpu Poricopper Oy, Pori, Finland, and the main partner in developing the technology for the iron insert of the canister has been Valmet Oyj Rautpohja Foundry, Jyvaeskylae, Finland. In both areas many subcontractors have been used, predominantly domestic engineering workshops, but also some foreign subcontractors, e.g. for EB-welding, who have had large enough welding equipment. This report describes the developing programmes for canister manufacturing, evaluates the results and presents some alternative methods, and tries to evaluate the pros and contras of them. In addition, the adequacy of the achieved technological know-how is assessed in respect of the required quality of the disposal canister. The following manufacturing technologies have been the concrete topics of the development programme: Electron beam welding technology development for thick-walled copper, Casting of massive copper billets, Hot rolling of thick-walled copper plates, Hot pressing and forging in lid manufacture, Extrusion and drawing of copper tubes, Bending of copper plates by roller or press, Machining of copper, Residual stress removal by heat treatment, Non-destructive testing, Long-term strength of EB-welds, Casting and machining of the iron insert of the canister The specialists from all the main developing partner companies have

Cooperative procurement: market transformation for energy efficient products

Energy Technology Data Exchange (ETDEWEB)

Ostertag, K.; Dreher, C.

1999-07-01

Cooperative procurement is a variation of public purchasing which may be used as an instrument to transform the market and stimulate innovation enhancing environmental performance. The core of the procedure is the following: Coordinated by a central agency a group of buyers - public administrations, but also private companies, associations, etc. - gets together and jointly formulates a catalogue of performance requirements for a specific product truly suiting their preferences. This catalogue may contain (combinations of) requirements not yet available on the market and includes energy efficiency and/or environmental performance among other preferences important to the users. On the basis of the product requirements the buyer group launches a call for tenders, evaluates the bids received from the manufacturers and commits to buying the winning product. Thus, a market is provided for the most successful innovators in a given area of technology. The paper discusses the effectiveness of cooperative procurement as a policy instrument in the context of innovation theory and learning curves and it presents some empirical results on the feasibility of the transfer of this policy instruments to a wider range of European countries and/or to the European level. (orig.)

Employment arrangement, job stress, and health-related quality of life ☆

Science.gov (United States)

Ray, Tapas K.; Kenigsberg, Tat’Yana A.; Pana-Cryan, Regina

2017-01-01

Objective We aimed to understand the characteristics of U.S. workers in non-standard employment arrangements, and to assess associations between job stress and Health-related Quality of Life (HRQL) by employment arrangement. Background As employers struggle to stay in business under increasing economic pressures, they may rely more on non-standard employment arrangements, thereby increasing the pool of contingent workers. Worker exposure to job stress may vary by employment arrangement. Excessive exposure to stressors at work is considered to be a potential health hazard, and may adversely affect health and HRQL. Methods We used the Quality of Worklife (QWL) module which supplemented the General Social Survey (GSS) in 2002, 2006, 2010, and 2014. GSS is a biannual, nationally representative cross-sectional survey of U.S. households that yields a representative sample of the civilian, non-institutionalized, English-speaking, U.S. adult population. The QWL module assesses an array of psychosocial working conditions and quality of work life topics among GSS respondents. We used pooled QWL responses from 2002 to 2014 by only those who reported being employed at the time of the survey. After adjusting for sampling probabilities, including subsampling for non-respondents and correcting for the number of adults in the household, 6005 respondents were included in our analyses. We grouped respondents according to their employment arrangement, including: (i) independent contractors (contractor), (ii) on call workers (on call), (iii) workers paid by a temporary agency (temporary), (iv) workers who work for a contractor (under contract), or (v) workers in standard employment arrangements (standard). Respondents were further grouped into those who were stressed and those who were not stressed at work. Descriptive population prevalence rates were calculated by employment arrangement for select demographic and organizational characteristics, psychosocial working conditions, work

Establishment of the International Nuclear Education/Training and its Cooperation Framework for Nuclear Transparency

International Nuclear Information System (INIS)

Min, B. J.; Han, K. W.; Lee, E. J.

2009-02-01

This project covered development and implementation of international nuclear education/training programs, cooperation for nuclear human resource development and education/training. provision of MS and PhD courses for qualified students from developing countries, and strengthening of infrastructure for the nuclear education/training. The WNU one week summer course was held for domestic future generation in nuclear field. NTC operated the ANENT web portal and cyber platform, supported training on their use, and prepared a KAERI-IAEA Practical Arrangement for the promotion of web-base nuclear education/training. For FNCA, an analysis was conducted on the need of nuclear education/training in South East Asian countries. The bilateral cooperation included cooperation with Vietnam. provision of Korean experience for nuclear power personnel from Egypt, and commencing of cooperation with South Africa. Also, NTC participated in GENEP for sharing Korean experience in the nuclear human resource development project. KAERI-UST MA and PhD courses with 3 foreign students started in spring 2008 and implemented. The courses were advance nuclear reactor system engineering, accelerator and nano-beam engineering, and radiation measurement science. 13 international nuclear education/training courses (IAEA, KOICA, RCARO and bilateral) were implemented for 226 foreign trainees. A reference education/training program was developed, which consisted of 15 courses that can be customized to learner levels and project stages of countries in question (e.g. Middle East. Africa). A textbook entitled 'Research Reactor Design, Management and Utilization' was developed presenting Korean experience with research reactors

Modernization of the Radioisotopes Production Laboratory of the La Reina Nuclear Center in Chile: Incorporating advanced concepts of safety and good manufacturing practices

International Nuclear Information System (INIS)

Lagos Espinoza, Silvia

2014-01-01

A radioisotopes and radiopharmaceuticals production laboratory was established in Chile in the 1960s for research activities. From 1967 until January 2012, it was dedicated to the manufacturing of radioisotopes and radiopharmaceuticals for medical diagnosis and treatment purposes. In 2012, modernization of the facility’s design and technology began as part of the IAEA technical cooperation project, Modernizing the Radioisotopes Production Laboratory of La Reina Nuclear Centre by Incorporating Advanced Concepts of Safety and Good Manufacturing Practices, (CHI4022)

International cooperation

International Nuclear Information System (INIS)

Prieto, F.E.

1984-01-01

It looks doubtless that the need for an international cooperation to solve the worldwide energy problems is already a concern of individuals, institutions, and governments. This is an improvement. But there is something lacking. The author refers to the Atoms for Peace speech, the origin of the IAEA and of the subsequent spreading of the nuclear option. He also refers back to the call made by the Mexican government for a worldwide energy cooperation. He stresses the need for governments to cooperate, so that this international cooperation on energy can be put into operation for the benefit of mankind

The making of local hospital discharge arrangements

DEFF Research Database (Denmark)

Burau, Viola; Bro, Flemming

2015-01-01

Background Timely discharge is a key component of contemporary hospital governance and raises questions about how to move to more explicit discharge arrangements. Although associated organisational changes closely intersect with professional interests, there are relatively few studies in the lite......Background Timely discharge is a key component of contemporary hospital governance and raises questions about how to move to more explicit discharge arrangements. Although associated organisational changes closely intersect with professional interests, there are relatively few studies...... in the literature on hospital discharge that explicitly examine the role of professional groups. Recent contributions to the literature on organisational studies of the professions help to specify how professional groups in hospitals contribute to the introduction and routinisation of discharge arrangements...... for patients with prostate cancer in two hospitals in Denmark. This represents a typical case that involves changes in professional practice without being first and foremost a professional project. The multiple case design also makes the findings more robust. The analysis draws from 12 focus groups...

46 CFR 199.220 - Survival craft and rescue boat embarkation arrangements.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft and rescue boat embarkation arrangements... APPLIANCES AND ARRANGEMENTS LIFESAVING SYSTEMS FOR CERTAIN INSPECTED VESSELS Additional Requirements for Passenger Vessels § 199.220 Survival craft and rescue boat embarkation arrangements. (a) Survival craft...

46 CFR 167.15-28 - Inspection of lifesaving appliances and arrangements.

Science.gov (United States)

2010-10-01

... SCHOOLS PUBLIC NAUTICAL SCHOOL SHIPS Inspections § 167.15-28 Inspection of lifesaving appliances and arrangements. The inspection of lifesaving appliances and arrangements must be in accordance with the... 46 Shipping 7 2010-10-01 2010-10-01 false Inspection of lifesaving appliances and arrangements...

Cooperation for a competitive position: The impact of hospital cooperation behavior on organizational performance.

Science.gov (United States)

Büchner, Vera Antonia; Hinz, Vera; Schreyögg, Jonas

2015-01-01

Several public policy initiatives, particularly those involving managed care, aim to enhance cooperation between partners in the health care sector because it is expected that such cooperation will reduce costs and generate additional revenue. However, empirical evidence regarding the effects of cooperation on hospital performance is scarce, particularly with respect to creating a comprehensive measure of cooperation behavior. The aim of this study is to investigate the impact of hospital cooperation behavior on organizational performance. We differentiate between horizontal and vertical cooperation using two alternative measures-cooperation depth and cooperation breadth-and include the interaction effects between both cooperation directions. Data are derived from a survey of German hospitals and combined with objective performance information from annual financial statements. Generalized linear regression models are used. The study findings provide insight into the nature of hospitals' cooperation behavior. In particular, we show that there are negative synergies between horizontal administrative cooperation behavior and vertical cooperation behavior. Whereas the depth and breadth of horizontal administrative cooperation positively affect financial performance (when there is no vertical cooperation), vertical cooperation positively affects financial performance (when there is no horizontal administrative cooperation) only when cooperation is broad (rather than deep). Horizontal cooperation is generally more effective than vertical cooperation at improving financial performance. Hospital managers should consider the negative interaction effect when making decisions about whether to recommend a cooperative relationship in a horizontal or vertical direction. In addition, managers should be aware of the limited financial benefit of cooperation behavior.

Arrangement for guiding transport cables

International Nuclear Information System (INIS)

1981-01-01

This patent relates especially to x-ray equipment such as that used for computerized tomography, and in particular to an arrangement for guiding and supporting a plurality of power transmission cables and cooling hoses in a flexible manner. (U.K.)

Special Issue: Flexible Work Arrangements.

Science.gov (United States)

Olmstead, Barney, Ed.

1996-01-01

Section 1 contains five chapters on flexible work arrangements, self-employment, working from home, part-time professionals, job sharing, and temporary employment. Section 2 includes reviews of four books on working flexibly, concluding with a list of 23 additional readings. (SK)

Choosing the cooperative option

Energy Technology Data Exchange (ETDEWEB)

English, G. (National Rural Electric Cooperative Association (United States))

1999-06-01

Cooperatives do not ask to be exempted from the law. They do ask that laws and regulations be designed to allow them to meet the needs of their consumer-owners in accordance with cooperative principles, at a time that the marginal consumers being abandoned by for-profit utilities may be ready to gravitate toward cooperatives. The cooperative principles are worth reviewing because they explain the focus on the consumer and the cooperative concept of service: cooperatives are voluntary organizations, open to all persons able to use their services and willing to accept the responsibilities of membership; cooperatives are democratic organizations controlled by their members, who actively participate in setting policies and making decisions, the elected representatives are accountable to the membership; members contribute equitably to, and democratically control, the capital of their cooperative; cooperatives are autonomous, self-help organizations controlled by their members, if they enter into agreements with other organizations, including governments, they do so on terms that ensure democratic control by their members and maintain their cooperative autonomy; cooperatives provide education and training for their members, elected representatives, managers, and employees so they can contribute effectively to the development of their cooperatives, they inform the general public, particularly young people and opinion leaders, about the nature and benefits of cooperation; cooperatives serve their members most effectively and strength the cooperative movement by working together through local, national, regional, and international structures; and while focusing on member needs, cooperatives work for the sustainable development of their communities through policies accepted by their members.

On capital allocation for stochastic arrangement increasing actuarial risks

Directory of Open Access Journals (Sweden)

Pan Xiaoqing

2017-01-01

Full Text Available This paper studies the increasing convex ordering of the optimal discounted capital allocations for stochastic arrangement increasing risks with stochastic arrangement decreasing occurrence times. The application to optimal allocation of policy limits is presented as an illustration as well.

International co-operation

International Nuclear Information System (INIS)

1998-01-01

In this part the are reviewed: Co-operation with IAEA; Participation of the Slovakia on the 41 st session of the General Conference; The comprehensive Nuclear-Test-Ban Treaty Organization; Co-operation with the Organization for Economic Co-operation and Development; co-operation with the European Commission; Fulfillment of obligations resulting from the international contracting documents

Report on the FY 1999 research cooperation follow-up project on the development of manufacturing technology supported by advanced and integrated information system through cooperation; 1999 nendo kan'i sosagata denshi sekkei seisan shien system no kaihatsu ni kansuru kenkyu kyoryoku follow up jigyo hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

In FY 1999, the follow-up project was conducted on the development of manufacturing technology supported by advanced and integrated information system through cooperation (MATIC). The project included the grasp of the state of activity, announcement of the achievement, field survey, etc. of China, Indonesia, Malaysia, Singapore and Thailand. China carried out the system development and demonstrative tests in the fiber/apparel field, trying to spread the MATIC system. Indonesia is planning to spread the use of electronic catalog of automotive parts/electronic parts toward small/medium companies through internet. Malaysia was in charge of the development in the field of home electric appliances and demonstrative tests. They use the results so as to meet the demand in the domestic industry, aiming at spreading it in the country. Singapore uses the electronic catalog system to make it apply to the informatization project of the country. Thailand is making efforts for the spread of the MATIC results through the prototype model. (NEDO)

International co-operation in safety matters within the framework of the Commission of the European Communities

International Nuclear Information System (INIS)

Vinck, W.; Balz, W.; Essler, W.; Tolley, B.; Gabolde, J.

1981-01-01

European Community (EC) countries realize that their energy demand cannot be met without a nuclear component, which is almost a necessity owing to its major economic advantages. Two typical areas where the Commission has stimulated intense international co-operation are as follows: The first broad area deals with efforts towards a gradual harmonization of regulatory health and safety practices and requirements for reactors of an industrially developed type, more specifically (light) water-cooled reactors. The second area concerns joint research programmes and co-ordination activities in research on nuclear safety (LWRs and LMFBRs). These two broad areas are closely interconnected. Information is also given on the existing network of bilateral and multilateral arrangements for the exchange of information of interest to the EC. In conclusion, some problems are highlighted where improvements could be made or where it seems crucial that increased international co-operation and especially agreement should come about. (author)

Precision manufacturing

CERN Document Server

Dornfeld, David

2008-01-01

Today there is a high demand for high-precision products. The manufacturing processes are now highly sophisticated and derive from a specialized genre called precision engineering. Precision Manufacturing provides an introduction to precision engineering and manufacturing with an emphasis on the design and performance of precision machines and machine tools, metrology, tooling elements, machine structures, sources of error, precision machining processes and precision process planning. As well as discussing the critical role precision machine design for manufacturing has had in technological developments over the last few hundred years. In addition, the influence of sustainable manufacturing requirements in precision processes is introduced. Drawing upon years of practical experience and using numerous examples and illustrative applications, David Dornfeld and Dae-Eun Lee cover precision manufacturing as it applies to: The importance of measurement and metrology in the context of Precision Manufacturing. Th...

Third-party punishment increases cooperation in children through (misaligned) expectations and conditional cooperation.

Science.gov (United States)

Lergetporer, Philipp; Angerer, Silvia; Glätzle-Rützler, Daniela; Sutter, Matthias

2014-05-13

The human ability to establish cooperation, even in large groups of genetically unrelated strangers, depends upon the enforcement of cooperation norms. Third-party punishment is one important factor to explain high levels of cooperation among humans, although it is still somewhat disputed whether other animal species also use this mechanism for promoting cooperation. We study the effectiveness of third-party punishment to increase children's cooperative behavior in a large-scale cooperation game. Based on an experiment with 1,120 children, aged 7 to 11 y, we find that the threat of third-party punishment more than doubles cooperation rates, despite the fact that children are rarely willing to execute costly punishment. We can show that the higher cooperation levels with third-party punishment are driven by two components. First, cooperation is a rational (expected payoff-maximizing) response to incorrect beliefs about the punishment behavior of third parties. Second, cooperation is a conditionally cooperative reaction to correct beliefs that third party punishment will increase a partner's level of cooperation.

41 CFR 301-50.2 - How must I arrange my travel?

Science.gov (United States)

2010-07-01

... travel? 301-50.2 Section 301-50.2 Public Contracts and Property Management Federal Travel Regulation System TEMPORARY DUTY (TDY) TRAVEL ALLOWANCES ARRANGING FOR TRAVEL SERVICES, PAYING TRAVEL EXPENSES, AND CLAIMING REIMBURSEMENT 50-ARRANGING FOR TRAVEL SERVICES § 301-50.2 How must I arrange my travel? You must...

46 CFR 31.36-1 - Lifesaving appliances and arrangements-TB/ALL.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Lifesaving appliances and arrangements-TB/ALL. 31.36-1... CERTIFICATION Lifesaving Appliances and Arrangements § 31.36-1 Lifesaving appliances and arrangements—TB/ALL. All lifesaving appliances and arrangements on tank vessels must be in accordance with subchapter W...

Living arrangements and suicidal ideation among the Korean older adults.

Science.gov (United States)

Kim, Jibum; Lee, Yun-Suk; Lee, Jinkook

2016-12-01

This study examines how living arrangements are associated with suicidal ideation for older adults in South Korea, which has the highest suicide rate among OECD countries, and a particularly high suicide rate for older persons. Analyzing a sample of 5795 women and 3758 men aged 65 and older from a nationwide representative cross-sectional data-set, we examined how many older adults think about suicide over a one-year period, why they think about suicide, and whether living arrangements are associated with suicidal ideation. About 1 out of 12 respondents in our sample reported suicidal ideation. While women and men did not differ in the prevalence of suicidal ideation, women attributed their suicidal feelings to health problems, while men attributed theirs to economic difficulties. Logistic regression results indicated that living arrangements are associated with suicidal ideation for men but not women. Older men living with a spouse were less likely to have suicidal ideation than older men with other living arrangements (i.e., living alone, living with children without spouse, living with spouse, and others). Our results highlight the importance of living arrangements to older men's suicidal ideation. We discuss gender differences in the implications of living arrangements to suicidal ideation within the context of Confucian culture.

Military Technology and Conventional Weapons Export Controls: The Wassenaar Arrangement

National Research Council Canada - National Science Library

Grimmett, Richard F

2006-01-01

This report provides background on the Wassenaar Arrangement, which was formally established in July 1996 as a multilateral arrangement aimed at controlling exports of conventional weapons and related...

26 CFR 1.1402(a)-18 - Split-dollar life insurance arrangements.

Science.gov (United States)

2010-04-01

... life insurance arrangements. See §§ 1.61-22 and 1.7872-15 for rules relating to the treatment of split-dollar life insurance arrangements. [T.D. 9092, 68 FR 54352, Sept. 17, 2003] ... 26 Internal Revenue 12 2010-04-01 2010-04-01 false Split-dollar life insurance arrangements. 1...

Core arrangement in BWR type reactors

International Nuclear Information System (INIS)

Asano, Masayuki.

1981-01-01

Purpose: To decrease the number of fuel assemblies whose locations are to be changed upon fuel exchange, as well as unify the power distribution in the core by arranging, in a chess board configuration, a plurality pattern of unit reactor lattices each containing fuel assemblies of different burnup degrees in orthogonal positions to each other. Constitution: A first pattern of unit reactor lattice is formed by disposing fuel assemblies of burnup degree 1 and fuel assemblies of burnup degree 3 at orthogonal positions to each other. A second pattern of unit reactor lattice is formed by disposing fuel assemblies of burnup degree 2 and fuel assemblies of burnup degree 1 at orthogonal positions to each other. The unit lattices each in such a dispositions are arranged in a chess board arrangement. Since, the fuel assemblies of the burnup degree 1 in the first pattern unit lattices proceed to the burnup degree 2 and the fuel assemblies of the burnup degree 2 in the second pattern unit lattices proceed to the burnup degree 3 up to the fuel exchange stage, fuel exchange and movement have only to be made, not for those fuel assemblies, but for another half of the fuel assemblies. (Kawakami, Y.)

METHOD FOR DETERMINING THE MAXIMUM ARRANGEMENT FACTOR OF FOOTWEAR PARTS

Directory of Open Access Journals (Sweden)

DRIŞCU Mariana

2014-05-01

Full Text Available By classic methodology, designing footwear is a very complex and laborious activity. That is because classic methodology requires many graphic executions using manual means, which consume a lot of the producer’s time. Moreover, the results of this classical methodology may contain many inaccuracies with the most unpleasant consequences for the footwear producer. Thus, the costumer that buys a footwear product by taking into consideration the characteristics written on the product (size, width can notice after a period that the product has flaws because of the inadequate design. In order to avoid this kind of situations, the strictest scientific criteria must be followed when one designs a footwear product. The decisive step in this way has been made some time ago, when, as a result of powerful technical development and massive implementation of electronical calculus systems and informatics, This paper presents a product software for determining all possible arrangements of a footwear product’s reference points, in order to automatically acquire the maximum arrangement factor. The user multiplies the pattern in order to find the economic arrangement for the reference points. In this purpose, the user must probe few arrangement variants, in the translation and rotate-translation system. The same process is used in establishing the arrangement factor for the two points of reference of the designed footwear product. After probing several variants of arrangement in the translation and rotation and translation systems, the maximum arrangement factors are chosen. This allows the user to estimate the material wastes.

Implementing Coordinative Contracts between Manufacturer and Retailer in a Reverse Supply Chain

Directory of Open Access Journals (Sweden)

Sung Wook Yoon

2016-09-01

Full Text Available There is an increasing need for company awareness of environmental problems and sustainable business practices. As a post-consumption activity, the reverse supply chain aims to extract value from products at the end of their lifecycle; it offers a means of pursuing sustainability through recycling, remanufacturing, refurbishing, and reusing. This study develops a series of procedures for implementing contracts between manufacturers and retailers to maximize individual profits and total profits through the reverse supply chain. To analyze the effects of the decision strategies made by parties acting on non-coordinative (decentralized and coordinative contracts, we model a two-echelon reverse supply chain environment using a system dynamics approach. In this study, we examine three cooperative contracts with differing shares of cost and profit between the two parties. Each contract is analyzed according to the following three contract processes. First, the manufacturer proposes a set of contracts that can be considered by the retailer. Second, the retailer evaluates the proposed contracts and chooses the one that is expected to maximize profits. Finally, the retailer and manufacturer adjust the parameters of the best contract to achieve the mutual goal of the supply chain. Using the experimental results, we discuss the best coordinative strategy between manufacturer and retailer for maximizing profits in the reverse supply chain.

Lessons Learned from ISS Cooperation

Science.gov (United States)

Jolly, C.

2002-01-01

Forty years of human spaceflight activities are now culminating in the International Space Station program (ISS). The ISS involves fifteen nations, working together to create a permanently occupied orbital facility that will support scientific and potentially, commercial endeavours. The assembly of the ISS is scheduled to be completed later in this decade, after which it will be operated for at least ten years. At the strategic level, such a complex international project is highly dependent on the fifteen Partners' respective internal politics and foreign policies. On the operational level, Partners still have certain difficulties in issuing and agreeing to common technical procedures. As with almost all aspects of International Space Station cooperation, the Partners are going through a constant learning process, where they have to deal with complex political, legal and operational differences. Intergovernmental Agreement and the Memoranda of Understanding, the instruments forming the legal backbone of the International Space Station cooperation, are still lacking a fair number of arrangements that need to be created for completing and operating the Station. The whole endeavour is also a constant learning process at the operational level, as astronauts, cosmonauts, engineers and technicians on the ground with different cultural and educational backgrounds, learn to work together. One recent Space Shuttle mission to the Station showed the importance of standardising even trivial system components such as packaging labels, as it took the astronauts half a day more than planned to correctly unpack the equipment. This paper will provide a synthesis of some of the main lessons learned during the first few years of International Space Station's lifetime. Important political, legal and operational issues will be addressed and combined. This analysis will provide some guidelines and recommendations for future international space projects, such as an international human

Do Knowledge Arrangements Affect Student Reading Comprehension of Genetics?

Science.gov (United States)

Wu, Jen-Yi; Tung, Yu-Neng; Hwang, Bi-Chi; Lin, Chen-Yung; Che-Di, Lee; Chang, Yung-Ta

2014-01-01

Various sequences for teaching genetics have been proposed. Three seventh-grade biology textbooks in Taiwan share similar key knowledge assemblages but have different knowledge arrangements. To investigate the influence of knowledge arrangements on student understanding of genetics, we compared students' reading comprehension of the three texts…

29 CFR 780.126 - Contract arrangements for raising poultry.

Science.gov (United States)

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Contract arrangements for raising poultry. 780.126 Section... General Scope of Agriculture Raising of Livestock, Bees, Fur-Bearing Animals, Or Poultry § 780.126 Contract arrangements for raising poultry. Feed dealers and processors sometimes enter into contractual...

Ulysses arrangements in psychiatry: a matter of good care?

NARCIS (Netherlands)

Gremmen, I.; Widdershoven, G.A.M.; Beekman, A.T.F.; Zuijderhoudt, R.H.; Sevenhuijsen, S.

2008-01-01

This article concerns the issue of how an ethic of care perspective may contribute to both normative theory and mental health care policy discussions on so called Ulysses arrangements, a special type of advance directives in psychiatry. The debate on Ulysses arrangements has predominantly been waged

Ulysses Arrangements in psychiatry: A matter of good care?

NARCIS (Netherlands)

Gremmen, C.C.M.; Widdershoven, G.G; Beekman, A; Zuijderhoudt, R.; Sevenhuijsen, S.

2008-01-01

This article concerns the issue of how an ethic of care perspective may contribute to both normative theory and mental health care policy discussions on so called Ulysses arrangements, a special type of advance directives in psychiatry. The debate on Ulysses arrangements has predominantly been waged

48 CFR 501.105-1 - Publication and code arrangement.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Publication and code arrangement. 501.105-1 Section 501.105-1 Federal Acquisition Regulations System GENERAL SERVICES... 501.105-1 Publication and code arrangement. The GSAR is published in the following sources: (a) Daily...

28 CFR 550.44 - Procedures for arranging drug counseling.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Procedures for arranging drug counseling... MANAGEMENT DRUG PROGRAMS Drug Services (Urine Surveillance and Counseling for Sentenced Inmates in Contract CTCs) § 550.44 Procedures for arranging drug counseling. The contract center staff shall hold a program...

The new electricity trading arrangements: prospects for market development

International Nuclear Information System (INIS)

Anon

1999-09-01

This Briefing Paper from OXERA argues that the OFGEM proposals will not solve the fundamental market problems and might even make things worse. They focus too narrowly on the technical design of one small part of the market (the Balancing Mechanism and associated imbalance settlement process), without considering the market context and dynamics. OXERA argues that the central emphasis of the White Paper was misplaced: reform of the electricity trading arrangements, the basis of the government's strategy, will not solve the upstream and downstream market problems. The Briefing Paper includes analysis of: the structure and operation of the proposed new electricity trading arrangements; risk in the electricity wholesale market, and the responses of market participants; the interaction between the new trading arrangements and other energy market developments - in particular, vertical integration between generators and suppliers; energy supply competition, and wider government policy; the prospects for market development under the new electricity trading arrangements. (author)

Manufacturing network evolution

DEFF Research Database (Denmark)

Yang, Cheng; Farooq, Sami; Johansen, John

2011-01-01

Purpose – This paper examines the effect of changes at the manufacturing plant level on other plants in the manufacturing network and also investigates the role of manufacturing plants on the evolution of a manufacturing network. Design/methodology/approach –The research questions are developed...... different manufacturing plants in the network and their impact on network transformation. Findings – The paper highlights the dominant role of manufacturing plants in the continuously changing shape of a manufacturing network. The paper demonstrates that a product or process change at one manufacturing...... by identifying the gaps in the reviewed literature. The paper is based on three case studies undertaken in Danish manufacturing companies to explore in detail their manufacturing plants and networks. The cases provide a sound basis for developing the research questions and explaining the interaction between...

International Cooperation of Payload Operations on the International Space Station

Science.gov (United States)

Melton, Tina; Onken, Jay

2003-01-01

One of the primary goals of the International Space Station (ISS) is to provide an orbiting laboratory to be used to conduct scientific research and commercial products utilizing the unique environment of space. The ISS Program has united multiple nations into a coalition with the objective of developing and outfitting this orbiting laboratory and sharing in the utilization of the resources available. The primary objectives of the real- time integration of ISS payload operations are to ensure safe operations of payloads, to avoid mutual interference between payloads and onboard systems, to monitor the use of integrated station resources and to increase the total effectiveness of ISS. The ISS organizational architecture has provided for the distribution of operations planning and execution functions to the organizations with expertise to perform each function. Each IPP is responsible for the integration and operations of their payloads within their resource allocations and the safety requirements defined by the joint program. Another area of international cooperation is the sharing in the development and on- orbit utilization of unique payload facilities. An example of this cooperation is the Microgravity Science Glovebox. The hardware was developed by ESA and provided to NASA as part of a barter arrangement.

Steam generator arrangement

International Nuclear Information System (INIS)

Ssinegurski, E.

1981-01-01

A steam flow path arrangement for covering the walls of the rear gas pass of a steam generator is disclosed. The entire flow passes down the sidewalls with a minor portion then passing up through the rear wall to a superheater inlet header at an intermediate elevation. The major portion of the flow passes up the front wall and through hanger tubes to a roof header. From there the major portion passes across the roof and down the rear wall to the superheater inlet header at the intermediate elevation

Financial Arrangements and Relationship Quality in Low-Income Couples

Science.gov (United States)

Addo, Fenaba R.; Sassler, Sharon

2010-01-01

This study explored the association between household financial arrangements and relationship quality using a representative sample of low-income couples with children. We detailed the banking arrangements couples utilize, assessed which factors relate to holding a joint account versus joint and separate, only separate, or no account, and analyzed…

48 CFR 3001.105-1 - Publication and code arrangement.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Publication and code arrangement. 3001.105-1 Section 3001.105-1 Federal Acquisition Regulations System DEPARTMENT OF HOMELAND... Purpose, Authority, Issuance 3001.105-1 Publication and code arrangement. (a) The HSAR is published in: (1...

STRUCTURAL ALTERNATIVES OF RUSSIAN MANUFACTURING INDUSTRIES AND ARCHITECTURE OF TECHNOLOGICAL MODERNIZATION. PART 1

Directory of Open Access Journals (Sweden)

Izryadnova O. I.

2014-06-01

Full Text Available Continuing stagnation in the Russian economy makes a compelling case for structural reforms and transition to new technologies in non-financial sector. Given the backdrop of investor choice to wait out the situation and pause their investments, stagnation threatens to remain for longer. The biggest concerns are related to the slowdown in the range of high-tech non-resource manufacturing industries. These industries should become the cornerstone to foster the development of scientific, technical, and innovative potential of the country, overcoming the technical deficit, and implementation of modern technologies of the sixth technological generation. The article assesses the place and role of manufacturing industries in Russia’s economy and presents an analysis of dynamic shifts in their structure during the business cycle. The article demonstrates the results of empirical study of monitoring of innovative receptiveness of manufacturing industries. We discuss the directions of expanded cooperation between business and state. We also outline opportunities for correcting policies and tools directed at activating innovative functioning of the manufacturing sector in the view of the growth of geopolitical tensions, forms and methods of effective institutional management of the modernization of business units. It appears that the issues of investment maneuver to single out some types of economic activities, which manufacture products and services with high added value and increasing competitiveness of the Russian economy, call for the change in the model of economic development.

STRUCTURAL ALTERNATIVES OF RUSSIAN MANUFACTURING INDUSTRIES AND ARCHITECTURE OF TECHNOLOGICAL MODERNIZATION. PART 2

Directory of Open Access Journals (Sweden)

Izryadnova O. I.

2014-09-01

Full Text Available Continuing stagnation in the Russian economy makes a compelling case for structural reforms and transition to new technologies in non-financial sector. Given the backdrop of investor choice to wait out the situation and pause their investments, stagnation threatens to remain for longer. The biggest concerns are related to the slowdown in the range of high-tech non-resource manufacturing industries. These industries should become the cornerstone to foster the development of scientific, technical, and innovative potential of the country, overcoming the technical deficit, and implementation of modern technologies of the sixth technological generation. The article assesses the place and role of manufacturing industries in Russia’s economy and presents an analysis of dynamic shifts in their structure during the business cycle. The article demonstrates the results of empirical study of monitoring of innovative receptiveness of manufacturing industries. We discuss the directions of expanded cooperation between business and state. We also outline opportunities for correcting policies and tools directed at activating innovative functioning of the manufacturing sector in the view of the growth of geopolitical tensions, forms and methods of effective institutional management of the modernization of business units. It appears that the issues of investment maneuver to single out some types of economic activities, which manufacture products and services with high added value and increasing competitiveness of the Russian economy, call for the change in the model of economic development.

One mum too few: maternal status in host surrogate motherhood arrangements.

Science.gov (United States)

Oultram, Stuart

2015-06-01

In a host surrogate motherhood arrangement, the surrogate agrees to be implanted with, and carry to term, an embryo created from the commissioning couple's gametes. When the surrogate child is born, it is the surrogate mother who, according to UK law, holds the legal status of mother. By contrast, the commissioning mother possesses no maternal status and she can only attain it once the surrogate agrees to the completion of the arrangement. One consequence of this is that, in the event that a host arrangement fails, the commissioning mother is left without maternal status. In this paper, I argue that this denial of maternal status misrepresents the commissioning mother's role in the host arrangement and her relationship with the surrogate child. Consequently, I suggest that commissioning mothers participating in host surrogacy arrangements ought to be granted the status of mother in the event that the arrangement fails. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Sorting and sustaining cooperation

DEFF Research Database (Denmark)

Vikander, Nick

2013-01-01

This paper looks at cooperation in teams where some people are selfish and others are conditional cooperators, and where lay-offs will occur at a fixed future date. I show that the best way to sustain cooperation prior to the lay-offs is often in a sorting equilibrium, where conditional cooperators...... can identify and then work with one another. Changes to parameters that would seem to make cooperation more attractive, such as an increase in the discount factor or the fraction of conditional cooperators, can reduce equilibrium cooperation if they decrease a selfish player's incentive to sort....

After all, What variables Characterize the Existence of Local Productive Arrangements and Local Roduction Systems?

Directory of Open Access Journals (Sweden)

Rafael Mendes Lübeck

2012-06-01

Full Text Available In this paper we established a distinction between the various terms used to characterize clusters of firms. Once in the literature, we identified that the terms, Local Productive Arrangements (LPA and Local Production Systems (LPS are used interchangeably. However, these terminologies refer to different stages of development of territorial agglomerations of firms. In the same way, the agglomeration of businesses belonging to a same production chain in a particular region would not necessarily characterize an LPA or LPS. The aim of this paper was to demonstrate the need to combine methods and variables to draw a more accurate and comprehensive territorial productive situation allowing the classification of clusters according to their stage of development and institutional structure. For that purpose, the strength of cooperation between local professionals was considered as a major factor, which creates a competitive advantage that requires exogenous interests to make use of the endogenous capabilities strategically developed and cultivated.

Gender and Ethnic Variation in Arranged Marriages in a Chinese City

Science.gov (United States)

Zang, Xiaowei

2008-01-01

Using a data set (N = 1,600) collected in the city of Urumchi in 2005, this article examines ethnic differences in arranged marriages in urban China. Data analysis shows a rapid decline in parental arrangement for both Uyghur Muslims and Han Chinese in Urumchi. Han Chinese are less likely than Uyghur Muslims to report arranged marriages, with main…

Flexible Work Arrangements in ARL Libraries. SPEC Kit #180.

Science.gov (United States)

Zabel, Diane, Comp.; And Others

This report presents the results of a survey of Association of Research Libraries (ARL) members about the current climate and practices regarding flexible work arrangements. Data are reported on the availability of schedule flexibility, job exchange, part-time arrangements, and leaves, as well as information about faculty status, tenure,…

Condition monitoring of a rotor arrangement in particular a wind turbine

DEFF Research Database (Denmark)

2017-01-01

the rotor arrangement rotates, recording corresponding values of azimuth angle and edgewise and flap wise root bending moments for a plurality of rotations of rotor arrangement, transforming by use of e.g. a multi blade coordinate transformation, a Park's transformation or similar transformation......The present invention relates to a method of determining the condition of a device comprising a rotor arrangement. The rotor arrangement comprising a rotational shaft and a number rotor blades each connected at the root to the rotational shaft and extending radially from the rotational shaft....... Sensors are arranged to measure for each rotor blade corresponding values of one or more of the following parameters: azimuth angle (Φ) (or a parameter related to the azimuth angle), root bending moment(s) (q), such as the edgewise and/or flapwise root bending moments. The method comprises, while...

Cooperatives as Entrants

OpenAIRE

Richard J. Sexton; Terri A. Sexton

1987-01-01

A potential shortcoming of game-theoretic models in industrial organization is their failure to consider consumers as players. We introduce a customer coalition --- a cooperative -- as a potential entrant and compare the cooperative entry threat with that posed by the usual for-profit entrant. We identify four fundamental distinctions between cooperative and for-profit entrants and demonstrate that the strategic interplay between a cooperative and an incumbent firm may differ markedly from th...

CuRa: Cooperation on non-polluting resource exchange for cost reduction. Final report; CuRa: Cooperation fuer umweltschonenden Ressourcenaustausch zur Nutzung von Kostenreduktionspotenzialen. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Schoen, M.; Delahaye, F.; Hiessl, H.; Kotz, C.; Kuntze, U.; Matuschweski, A.; Schuenke, P.; Zoche, P.; Hafkesbrink, J.; Rebhan, A.; Schroll, M.

2003-02-01

The project CuRa: (German acronym for Cooperation for Environmentally Friendly Exchange of Resources) aimed to design elements to put into practice the model of sustainable development. The focus was on the participation of industry and business on a regional level and two model regions were chosen for the analysis of case studies. It was intended to give impulses for regional material flow networks between companies, for example by bundling similar material flows to achieve a better profitability and by one-to-one cooperation between companies, one of them using the waste of the partner as raw material. In addition, the potential for reducing material throughput using modern information technology was investigated in a case study. A set of theses derived from institutional theory was verified on the basis of the empirical results. Useful for the development and the stabilization of networks are, among others, expected economic benefits for the partners, common socio-cultural values and traditions, and using existing institutional arrangements as a basis. Different forms of market and policy failures were identified as obstacles, e.g. the established system of waste disposal services, the focus among the responsible actors on compliance with existing rules, and different regulatory obstacles. Nevertheless, in spite of the insufficient number of successful examples and demonstration projects, a shift in orientation from focusing on mere waste disposal towards a closed loop recycling economy and even towards sustainable development was identified within the commercial sector. (orig.) [German] Im Projekt CuRa: (Cooperation fuer umweltschonenden Ressourcenaustausch) sollten in zwei Modellregionen Bausteine fuer die operative Umsetzung des Leitbildes nachhaltiger Entwicklung durch regionale Akteure aus Industrie und Gewerbe entwickelt werden. Es sollte ein Anstoss zu zwischen- und ueberbetrieblicher Vernetzung von Materialfluessen sowie zu einer Umgestaltung der

Implementation of hierarchical design for manufacture rules in manufacturing processes

OpenAIRE

Parvez, Masud

2008-01-01

In order to shorten the product development cycle time, minimise overall cost and smooth transition into production, early consideration of manufacturing processes is important. Design for Manufacture (DFM) is the practice of designing products with manufacturing issues using an intelligent system, which translates 3D solid models into manufacturable features. Many existing and potential applications, particularly in the field of manufacturing, require various aspects of features technology. ...

Manufacturing and assembly of the plasma- and outer vessel of the cryostat for Wendelstein 7-X

Energy Technology Data Exchange (ETDEWEB)

Hein, Bernd, E-mail: Bernd.Hein@ipp.mpg.de [Max-Planck Institut fuer Plasmaphysik, EURATOM Association, Teilinstitut Greifswald, Wendelsteinstrasse 1, D-17491 Greifswald (Germany); Cardella, Antonio; Hermann, Dieter; Hansen, Andreas [Max-Planck Institut fuer Plasmaphysik, EURATOM Association, Teilinstitut Greifswald, Wendelsteinstrasse 1, D-17491 Greifswald (Germany); Leher, Franz; Binni, Andreas; Segl, Juergen [MAN Diesel and Turbo SE Deggendorf, Werftstrasse 17, D-94469 Deggendorf (Germany)

2012-02-15

Wendelstein 7-X is an advanced helical stellarator, which is presently under construction at the Greifswald branch of IPP. A set of 70 superconducting coils arranged in five modules provides a twisted shaped magnetic cage for the plasma and allows steady state operation. Operation of the magnet system at cryogenic temperatures requires a cryostat which provides thermal protection and gives access to the plasma. The main components of the cryostat are the plasma vessel, the outer vessel, the ports, and the thermal insulation. The German company, MAN Diesel and Turbo SE Deggendorf (former MAN DWE GmbH Deggendorf), is responsible for the manufacture and assembly of the plasma vessel, the outer vessel and the thermal insulation. This paper describes the manufacturing and assembly technology of the plasma and outer vessel of the cryostat for Wendelstein 7-X.

Manufacturing and assembly of the plasma- and outer vessel of the cryostat for Wendelstein 7-X

International Nuclear Information System (INIS)

Hein, Bernd; Cardella, Antonio; Hermann, Dieter; Hansen, Andreas; Leher, Franz; Binni, Andreas; Segl, Jürgen

2012-01-01

Wendelstein 7-X is an advanced helical stellarator, which is presently under construction at the Greifswald branch of IPP. A set of 70 superconducting coils arranged in five modules provides a twisted shaped magnetic cage for the plasma and allows steady state operation. Operation of the magnet system at cryogenic temperatures requires a cryostat which provides thermal protection and gives access to the plasma. The main components of the cryostat are the plasma vessel, the outer vessel, the ports, and the thermal insulation. The German company, MAN Diesel and Turbo SE Deggendorf (former MAN DWE GmbH Deggendorf), is responsible for the manufacture and assembly of the plasma vessel, the outer vessel and the thermal insulation. This paper describes the manufacturing and assembly technology of the plasma and outer vessel of the cryostat for Wendelstein 7-X.

Birthday Cake Activity Structured Arrangement for Helping Children Determining Quantities

Directory of Open Access Journals (Sweden)

Neni Mariana

2010-07-01

Full Text Available Few researches have been concerned about relation between children’s spatial thinking and number sense. Narrowing for this small research, we focused on one component of spatial thinking, that is structuring objects, and one component of number senses, that is cardinality by determining quantities. This study focused on a design research that was conducted in Indonesia in which we investigated pre-school children’s (between 2 and 3.5 years old ability in making structured arrangement and their ability to determine the quantities by looking at the arrangements. The result shows us that some of the children were able to make such arrangement. However, the children found difficulties either to determine quantities from those arrangements or to compare some structures to easily recognize number of objects.

Institutional arrangements of Currency Boards - Comparative Macroeconomic Analysis

OpenAIRE

Lubomira Anastassova

1999-01-01

This paper is concentrated on the comparative macroeconomic analysis of the differences stemming from the extent to which the institutional framework of the currency board arrangement is implemented in the legal and regulatory systems in the different countries. The main objective of taking into consideration and examining the currency board institutional arrangements is to distinguish between the impact that currency board countries and countries with pegged exchange rate have on different m...

Teaching Determinants Using Rook Arrangements

Science.gov (United States)

Hendrickson, Anders O. F.

2018-01-01

Teaching determinants poses significant challenges to the instructor of a proof-based undergraduate linear algebra course. The standard definition by cofactor expansion is ugly, lacks symmetry, and is hard for students to use in proofs. We introduce a visual definition of the determinant that interprets permutations as arrangements of…

Asymmetric public goods game cooperation through pest control.

Science.gov (United States)

Reeves, T; Ohtsuki, H; Fukui, S

2017-12-21

Cooperation in a public goods game has been studied extensively to find the conditions for sustaining the commons, yet the effect of asymmetry between agents has been explored very little. Here we study a game theoretic model of cooperation for pest control among farmers. In our simple model, each farmer has a paddy of the same size arranged adjacently on a line. A pest outbreak occurs at an abandoned paddy at one end of the line, directly threatening the frontier farmer adjacent to it. Each farmer pays a cost of his or her choice to an agricultural collective, and the total sum held by the collective is used for pest control, with success probability increasing with the sum. Because the farmers' incentives depend on their distance from the pest outbreak, our model is an asymmetric public goods game. We derive each farmer's cost strategy at the Nash equilibrium. We find that asymmetry among farmers leads to a few unexpected outcomes. The individual costs at the equilibrium do not necessarily increase with how much the future is valued but rather show threshold behavior. Moreover, an increase in the number of farmers can sometimes paradoxically undermine pest prevention. A comparison with a symmetric public goods game model reveals that the farmer at the greatest risk pays a disproportionate amount of cost in the asymmetric game, making the use of agricultural lands less sustainable. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Composites Manufacturing Education and Technology Facility Expedites Manufacturing Innovation

Energy Technology Data Exchange (ETDEWEB)

2017-01-01

The Composites Manufacturing Education and Technology facility (CoMET) at the National Wind Technology Center at the National Renewable Energy Laboratory (NREL) paves the way for innovative wind turbine components and accelerated manufacturing. Available for use by industry partners and university researchers, the 10,000-square-foot facility expands NREL's composite manufacturing research capabilities by enabling researchers to design, prototype, and test composite wind turbine blades and other components -- and then manufacture them onsite. Designed to work in conjunction with NREL's design, analysis, and structural testing capabilities, the CoMET facility expedites manufacturing innovation.

The Effects of Partnership Management on Supply Chain Cooperative Performance: A Case Study of High-Tech Industry

Science.gov (United States)

Wu, Mei-Ying; Chang, Yun-Ju; Weng, Yung-Chien

2009-08-01

With the structural change of global supply chains, the relationship between manufacturers and suppliers has transformed into a long-term partnership. Thus, this study aims to explore the partnership between manufacturers and suppliers in Taiwan's high-tech industry. Four constructs, including partner characteristic, partnership quality, partnership closeness, and cooperative performance, induced from previous literatures are used to construct the research framework and hypotheses. A questionnaire survey is then performed on executives and staffs involved in the high-tech industry. The proposed framework and hypotheses are empirically validated through confirmatory factory analysis and structural equation modeling. It is expected that the research findings can serve as a reference for Taiwan's high-tech industry on building partnerships.

Manufacturing strategy issues in selected Indian manufacturing industry

Directory of Open Access Journals (Sweden)

Mahender Singh

2013-03-01

Full Text Available This paper presents some findings of Indian manufacturing sectors viz. automobile (especially two-wheeler, tractor and general manufacturing industry. Various manufacturing strategy issues such as competitive priorities, improvement activities, and performance measures, have been identified and assessed in Indian context. Sector wise comparison of competitive priorities, improvement activities i.e. advanced manufacturing technology (AMT, integrated information systems (IIS, and advanced management systems (AMS, and performance measure, is provided. Our results showed that most of the Indian companies are still emphasizing on quality. However, automobile sector has set to compete globally with high innovation rate, faster new product development, and continuous improvement. It is also observed that Indian companies are investing more in AMS as compared to IIS and AMT. Manufacturing competence index is also computed for each sector.

Virtual Manufacturing Techniques Designed and Applied to Manufacturing Activities in the Manufacturing Integration and Technology Branch

Science.gov (United States)

Shearrow, Charles A.

1999-01-01

One of the identified goals of EM3 is to implement virtual manufacturing by the time the year 2000 has ended. To realize this goal of a true virtual manufacturing enterprise the initial development of a machinability database and the infrastructure must be completed. This will consist of the containment of the existing EM-NET problems and developing machine, tooling, and common materials databases. To integrate the virtual manufacturing enterprise with normal day to day operations the development of a parallel virtual manufacturing machinability database, virtual manufacturing database, virtual manufacturing paradigm, implementation/integration procedure, and testable verification models must be constructed. Common and virtual machinability databases will include the four distinct areas of machine tools, available tooling, common machine tool loads, and a materials database. The machine tools database will include the machine envelope, special machine attachments, tooling capacity, location within NASA-JSC or with a contractor, and availability/scheduling. The tooling database will include available standard tooling, custom in-house tooling, tool properties, and availability. The common materials database will include materials thickness ranges, strengths, types, and their availability. The virtual manufacturing databases will consist of virtual machines and virtual tooling directly related to the common and machinability databases. The items to be completed are the design and construction of the machinability databases, virtual manufacturing paradigm for NASA-JSC, implementation timeline, VNC model of one bridge mill and troubleshoot existing software and hardware problems with EN4NET. The final step of this virtual manufacturing project will be to integrate other production sites into the databases bringing JSC's EM3 into a position of becoming a clearing house for NASA's digital manufacturing needs creating a true virtual manufacturing enterprise.

Alternative vision or utopian fantasy? Cooperation, empowerment and women's cooperative development in India.

Science.gov (United States)

Mayoux, L

1995-01-01

The discussion addresses the costs and benefits of working in cooperatives in India, imposed participation, methods for increasing incomes, preconceived models, the importance of meeting the actual needs of women, and participatory options. This author evaluated 10 producer cooperatives in West Bengal, Karnataka, and Tamil Nadu during 1984-92. It is argued that more discussion is needed on how ideals of cooperation and empowerment of women can occur simultaneous with the context in which cooperatives must operate. The ten study cooperatives were all officially registered cooperatives. Cooperatives varied in size, organizational structure, and forms of support. Four were determined to be successful in economic and participatory terms. Three were successful because of the efforts of the women themselves. All three cases were based on earning goals that were higher than the women could have achieved on their own. Six failed in terms of participatory decision making and cooperative operations. Lack of sufficient support and/or excessive bureaucratic red tape were involved in the six failures, but to varying degrees. Type of support and means of implementation were important in the six failures. All women used cooperatives as a means of increasing income. Participation rules were imposed by outside agencies. Women were given "cooperative" training. Disputes occurred because women selected to power positions were powerful leaders outside the cooperative. Consensus was difficult to reach. There were conflicts of interest between different departments. Quality control was made difficult by women's inability to provide discipline. Personal conflicts from outside were carried on within the cooperative. Incomes could be improved by training women in local marketing and networking, insuring adequate resources and capital, and providing savings schemes. Gender inequalities were a key factor limiting income for women, but cooperatives did not address this issue. Gains for women

Semiconductor Manufacturing equipment introduction

International Nuclear Information System (INIS)

Im, Jong Sun

2001-02-01

This book deals with semiconductor manufacturing equipment. It is comprised of nine chapters, which are manufacturing process of semiconductor device, history of semiconductor manufacturing equipment, kinds and role of semiconductor manufacturing equipment, construction and method of semiconductor manufacturing equipment, introduction of various semiconductor manufacturing equipment, spots of semiconductor manufacturing, technical elements of semiconductor manufacturing equipment, road map of technology of semiconductor manufacturing equipment and semiconductor manufacturing equipment in the 21st century.

Lean Strategy Implementation to Improve Throughput in Assembly Line: Dul-Db21ssc Manufacturing Process at PT. X

Directory of Open Access Journals (Sweden)

Gemma Eka Santoso

2013-06-01

Full Text Available Lean production has dramatically lifted the competitiveness of many manufacturing companies and the value they deliver to customers. This project examines the benefit of balancing process and workstation arrangement of dogbone damper in an order that maintains a smooth flow of materials and component through the process. The analysis begins from calculating takt value to establish the required rate of production. From here, any total cycle time exceeding takt time is called a bottleneck process and should become a target of the improvement. Next, arranging people and equipment into cells has great advantage in terms of achieving lean goals. One advantage of cells is the one-piece flow concept, which states that each product moves through the process one unit a time without sudden interruption, at a pace determined by the customer’s need.  

New arrangement for the air cleanup system to recover tritium

International Nuclear Information System (INIS)

Nishikawa, Masabumi; Takahashi, Kohsaku; Munakata, Kenzo; Fukada, Satoshi; Kotoh, Kenji; Takeishi, Toshiharu

1997-01-01

At present, the standard arrangement of the air cleanup system responsible for emergency tritium recovery from room air is a catalytic oxidation bed with a heater followed by an adsorption bed with a cooler. One disadvantage of this arrangement is that trouble with the heater or the cooler could result in a loss of capacity to recover tritium. Another disadvantage of the catalyst-adsorption-bed arrangement is that tritiated water must be recovered with a high decontamination factor after dilution with a large amount of water vapor in the working atmosphere. The performance of a new arrangement for the air cleanup system, which consists of a precious metal catalyst bed preceded by an adsorption bed without heating equipment, is discussed. According to calculations, most of the tritium released to the room air is recovered in the catalyst bed through oxidation, adsorption, and isotope exchange reaction when the new arrangement is applied. The adsorption bed placed before the catalyst bed dehumidifies the process gas to such a degree that the oxidation reaction of tritium in the catalyst bed is not hindered by water vapor. 15 refs., 6 figs., 6 tabs

A study on the promotion of cooperation with 'women in nuclear (WIN)- global'

International Nuclear Information System (INIS)

Min, Byung Joo; Kim, K. R.; Kim, D. Y.

2001-04-01

International collaboration with WIN-Global. 1) Evaluation on current status for the foundation of WIN-Korea and investigation on the 1st to 8th WIN-Global conferences for the arrangement of 9th WIN-Global conferences 2) Manifestation on the roles of WIN-Korea and WIN-Global 3) Encouragement of active participation for WIN-Global activies -Establishment of internet net working for effective communication through the internet net working between women in science in Korea and other foreign countries. 1) Preparation and Organization of Women in Korea 2) Foundation of WIN-Korea Home Page in Net 3) Assembly of data for the net work construction in Korea - Enhancement of international cooperation between WIN-Korea and WIN-Global 1) Invitation of 9th WIN-Global Conference in Seoul, Korea 2) Enrollment of one of the Executives and Strengthening the activity of WIN-Korea as member of Board members 3) Characterization on main movements of WIN-Global through the active participation in international activities. - Arrangement for the 9th WIN-Global conference 1) Opperation of Organizing Committee and Supporting Committee and Secretariat 2) Supporting the 9th WIN-Global Confernce

Effect of initial fraction of cooperators on cooperative behavior in evolutionary prisoner's dilemma game.

Directory of Open Access Journals (Sweden)

Keizo Shigaki

Full Text Available We investigate the influence of initial fraction of cooperators on the evolution of cooperation in spatial prisoner's dilemma games. Compared with the results of heterogeneous networks, we find that there is a relatively low initial fraction of cooperators to guarantee higher equilibrium cooperative level. While this interesting phenomenon is contrary to the commonly shared knowledge that higher initial fraction of cooperators can provide better environment for the evolution of cooperation. To support our outcome, we explore the time courses of cooperation and find that the whole course can be divided into two sequent stages: enduring (END and expanding (EXP periods. At the end of END period, thought there is a limited number of cooperator clusters left for the case of low initial setup, these clusters can smoothly expand to hold the whole system in the EXP period. However, for high initial fraction of cooperators, superfluous cooperator clusters hinder their effective expansion, which induces many remaining defectors surrounding the cooperator clusters. Moreover, through intensive analysis, we also demonstrate that when the tendency of three cooperation cluster characteristics (cluster size, cluster number and cluster shape are consistent within END and EXP periods, the state that maximizes cooperation can be favored.

Development of Manufacturing Technology to Accelerate Cost Reduction of Low Concentration and

Energy Technology Data Exchange (ETDEWEB)

Detrick, Adam [The Solaria Corporation, Fremont, CA (United States)

2017-09-27

The purpose of this project was to accelerate deployment of cost-effective US-based manufacturing of Solaria’s unique c-Si module technology. This effort successfully resulted in the development of US-based manufacturing technology to support two highly-differentiated, market leading product platforms. The project was initially predicated on developing Solaria’s low-concentration PV (LCPV) module technology which at the time of the award was uniquely positioned to exceed the SunShot price goal of $0.50/Wp for standard c-Si modules. The Solaria LCPV module is a 2.5x concentrator that leverages proven, high-reliability PV module materials and low silicon cell usage into a technology package that already had the lowest direct material cost and leading Levelized Cost of Electricity (LCOE). With over 25 MW commercially deployed globally, the Solaria module was well positioned to continue to lead in PV module cost reduction. Throughout the term of the contract, market conditions changed dramatically and so to did Solaria’s product offerings to support this. However, the manufacturing technology developed for the LCPV module was successfully leveraged and optimized to support two new and different product platforms. BIPV “PowerVision” and High-efficiency “PowerXT” modules. The primary barrier to enabling high-volume PV module manufacturing in the US is the high manual labor component in certain unique aspects of our manufacturing process. The funding was used to develop unique manufacturing automation which makes the manual labor components of these key processes more efficient and increase throughput. At the core of Solaria’s product offerings are its unique and proprietary techniques for dicing and re-arranging solar cells into modules with highly-differentiated characteristics that address key gaps in the c-Si market. It is these techniques that were successfully evolved and deployed into US-based manufacturing site with SunShot funding. Today, Solaria

The impact of cooperation and competition on the performance of flexible decentralized manufacturing networks

Directory of Open Access Journals (Sweden)

Hu-Song Ding

2013-02-01

Full Text Available Due to the mismatch between the order of costumers and the production capacity resulting from demand uncertainty, product shortages or wastes of production capacity occur. In response, the subcontracting of production among the plants occurs to diminish the influence of this mismatch on expected profits. Using a small-and medium-sized firm industrial district, the decentralized decision-making process for flexibility investment is studied using the cooperative subcontracting mechanism based on a contract net protocol and is compared with centralized decision making on the flexibility investment problem. Through simulation, it is concluded that although flexibility can increase the opportunities to obtain additional orders, the distributed decision-making mechanism increases the competition among plants during the bidding process. Plants should tradeoff these two aspects to make decisions about investments in flexibility.

Advanced Manufacturing Technologies

Science.gov (United States)

Fikes, John

2016-01-01

Advanced Manufacturing Technologies (AMT) is developing and maturing innovative and advanced manufacturing technologies that will enable more capable and lower-cost spacecraft, launch vehicles and infrastructure to enable exploration missions. The technologies will utilize cutting edge materials and emerging capabilities including metallic processes, additive manufacturing, composites, and digital manufacturing. The AMT project supports the National Manufacturing Initiative involving collaboration with other government agencies.

International co-operation

International Nuclear Information System (INIS)

Klinda, J.; Lieskovska, Z.

1998-01-01

Within the Union Nations (UN) framework, the Slovak Republic participated in following activities on environment protection co-operation: UN European Economic Commission, UN Industrial Development Organization, UN Development Programme, UN Human Habitat Organization, UN Environment Programme, and UN Commission on Sustainable Development. Relevant activities of the Slovak Republic in these co-operations as well as in European Union and OECD activities are reviewed. International conventions and other forms of multilateral co-operation, bilateral co-operation, and international programmes and projects in which the Slovak Republic took participate are presented

Achieving continuous manufacturing: technologies and approaches for synthesis, workup, and isolation of drug substance. May 20-21, 2014 Continuous Manufacturing Symposium.

Science.gov (United States)

Baxendale, Ian R; Braatz, Richard D; Hodnett, Benjamin K; Jensen, Klavs F; Johnson, Martin D; Sharratt, Paul; Sherlock, Jon-Paul; Florence, Alastair J

2015-03-01

This whitepaper highlights current challenges and opportunities associated with continuous synthesis, workup, and crystallization of active pharmaceutical ingredients (drug substances). We describe the technologies and requirements at each stage and emphasize the different considerations for developing continuous processes compared with batch. In addition to the specific sequence of operations required to deliver the necessary chemical and physical transformations for continuous drug substance manufacture, consideration is also given to how adoption of continuous technologies may impact different manufacturing stages in development from discovery, process development, through scale-up and into full scale production. The impact of continuous manufacture on drug substance quality and the associated challenges for control and for process safety are also emphasized. In addition to the technology and operational considerations necessary for the adoption of continuous manufacturing (CM), this whitepaper also addresses the cultural, as well as skills and training, challenges that will need to be met by support from organizations in order to accommodate the new work flows. Specific action items for industry leaders are: Develop flow chemistry toolboxes, exploiting the advantages of flow processing and including highly selective chemistries that allow use of simple and effective continuous workup technologies. Availability of modular or plug and play type equipment especially for workup to assist in straightforward deployment in the laboratory. As with learning from other industries, standardization is highly desirable and will require cooperation across industry and academia to develop and implement. Implement and exploit process analytical technologies (PAT) for real-time dynamic control of continuous processes. Develop modeling and simulation techniques to support continuous process development and control. Progress is required in multiphase systems such as

46 CFR 167.20-17 - Bilge pumps, bilge piping and sounding arrangements.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Bilge pumps, bilge piping and sounding arrangements. 167... Ships § 167.20-17 Bilge pumps, bilge piping and sounding arrangements. The number, capacity, and arrangement of bilge pumps and bilge piping shall be in accordance with the requirements for cargo vessels...

Cooperatives between truth and validity

Directory of Open Access Journals (Sweden)

Guilherme Krueger

2014-12-01

Full Text Available The current declaration of the International Cooperative Alliance on cooperative identity since its 1995 Centennial Conference (which was held in Manchester makes no distinction between cooperation and cooperative. The lack of distinction between cooperation and cooperative has caused the Decennial Cooperative Action Plan to define cooperatives as a form, while their materiality is regarded as managerial: a business (activity under a cooperative form. An identity that is close to us cannot be reduced to form, without this being a problem. Therefore, the value underlying this identity —cooperation— must have a substantial basis, even if it is idealised, if it is to affect us.Received: 27.03.2014Accepted: 12.05.2014

X-ray tube arrangements

International Nuclear Information System (INIS)

Gillard, R.G.

1980-01-01

A technique for ensuring the rapid correction of both amplitude and offset errors in the deflectional movement of an electron beam along an X-ray emissive target is described. The movement is monitored at at least two positions during a sweep and differences, between the two movements and a desired movement, at these positions are combined in different proportions to produce a corrective servo signal. Such arrangements find application, for example, in computerised tomographic scanners. (author)

Methodology for systematic analysis and improvement of manufacturing unit process life cycle inventory (UPLCI) CO2PE! initiative (cooperative effort on process emissions in manufacturing). Part 2: case studies

DEFF Research Database (Denmark)

Kellens, Karel; Dewulf, Wim; Overcash, Michael

2012-01-01

industrial data and engineering calculations for energy use and material loss. This approach is illustrated by means of a case study of a drilling process.The in-depth approach, which leads to more accurate LCI data as well as the identification of potential for environmental improvements...... for environmental improvement based on the in-depth analysis of individual manufacturing unit processes. Two case studies illustrate the applicability of the methodology.......This report presents two case studies, one for both the screening approach and the in-depth approach, demonstrating the application of the life cycle assessment-oriented methodology for systematic inventory analysis of the machine tool use phase of manufacturing unit processes, which has been...

William Barlow and the Determination of Atomic Arrangement in Crystals.

Science.gov (United States)

Mauskopf, Seymour H

2015-04-01

William Barlow (1845-1934) was an important if unconventional scientist, known for having developed the 'closest-packing' atomic models of crystal structure. He resumed an early nineteenth-century tradition of utilizing crystallographical and chemical data to determine atomic arrangements in crystals. This essay recounts Barlow's career and scientific activity in three parts: (a) His place in the tradition of determining atomic arrangement in context of this earlier tradition and of contemporaneous developments of crystallography and chemistry, (b) his unconventional career, and (c) the 'success' of his program to determine atomic arrangements in crystals and its influence on the work of William Lawrence Bragg.

Flexible work arrangements and work-family conflict after childbirth.

Science.gov (United States)

Grice, Mira M; McGovern, Patricia M; Alexander, Bruce H

2008-10-01

Previous research has revealed that work-family conflict negatively influences women's health following childbirth. To examine if flexible work arrangements were associated with work-family conflict among women, 1 year after childbirth. Employed women, aged >or=18, were recruited while hospitalized for childbirth. Flexible work arrangements were measured at 6 months and work-family conflict was measured at 12 months. General linear models estimated the association between flexible work arrangements and work-family conflict. Of 1157 eligible participants, 522 were included in this analysis giving a 45% response rate. Compared to women who reported that taking time off was very hard, those who reported it was not too hard (beta = -0.80, SE = 0.36, P hours was associated with greater home spillover (beta = 0.46, SE = 0.18, P work home was associated with increased home spillover (beta = 0.35, SE = 0.14, P work hours and the ability to take work home were associated with increased home spillover to work. The ability to take time off was associated with decreased job spillover to home. Additional research is needed to examine the intentional and unintentional consequences of flexible work arrangements.

Nuclear reactor core stabilizing arrangement

International Nuclear Information System (INIS)

Jabsen, F.S.

1976-01-01

A nuclear reactor core stabilizing arrangement is described wherein a plurality of actuators, disposed in a pattern laterally surrounding a group of elongated fuel assemblies, press against respective contiguous fuel assemblies on the periphery of the group to reduce the clearance between adjacent fuel assemblies thereby forming a more compacted, vibration resistant core structure. 7 claims, 4 drawing figures

Storage arrangements for nuclear fuel

International Nuclear Information System (INIS)

Ealing, C.J.

1985-01-01

A storage arrangement for nuclear fuel has a plurality of storage tubes connected by individual pipes to manifolds which are connected, in turn, to an exhaust system for maintaining the tubes at sub-atmospheric pressure, and means for producing a flow of a cooling fluid, such as air, over the exterior surfaces of the tubes. (author)

Flow control arrangements for centrifuges

International Nuclear Information System (INIS)

Alderton, G.W.; Davidge, P.C.

1983-01-01

In a centrifuge plant for the separation of uranium isotopes, when a centrifuge machine breaks down, light gas is produced. This gas can cause adjacent machines to break down, so propagating the fault. The present invention provides flow control arrangements in gas pipes to the centrifuge, whereby sudden egress of gas from a failed machine is inhibited. (author)

An integrated DEA PCA numerical taxonomy approach for energy efficiency assessment and consumption optimization in energy intensive manufacturing sectors

International Nuclear Information System (INIS)

Azadeh, A.; Amalnick, M.S.; Ghaderi, S.F.; Asadzadeh, S.M.

2007-01-01

This paper introduces an integrated approach based on data envelopment analysis (DEA), principal component analysis (PCA) and numerical taxonomy (NT) for total energy efficiency assessment and optimization in energy intensive manufacturing sectors. Total energy efficiency assessment and optimization of the proposed approach considers structural indicators in addition conventional consumption and manufacturing sector output indicators. The validity of the DEA model is verified and validated by PCA and NT through Spearman correlation experiment. Moreover, the proposed approach uses the measure-specific super-efficiency DEA model for sensitivity analysis to determine the critical energy carriers. Four energy intensive manufacturing sectors are discussed in this paper: iron and steel, pulp and paper, petroleum refining and cement manufacturing sectors. To show superiority and applicability, the proposed approach has been applied to refinery sub-sectors of some OECD (Organization for Economic Cooperation and Development) countries. This study has several unique features which are: (1) a total approach which considers structural indicators in addition to conventional energy efficiency indicators; (2) a verification and validation mechanism for DEA by PCA and NT and (3) utilization of DEA for total energy efficiency assessment and consumption optimization of energy intensive manufacturing sectors

The relationship between work arrangements and work-family conflict.

Science.gov (United States)

Higgins, Christopher; Duxbury, Linda; Julien, Mark

2014-01-01

A review of the literature determined that our understanding of the efficacy of flexible work arrangements (FWA) in reducing work-family conflict remains inconclusive. To shed light on this issue by examining the relationship between work-to-family conflict, in which work interferes with family (WFC), family-to-work conflict, in which family interferes with work (FWC), and four work arrangements: the traditional 9-5 schedule, compressed work weeks (CWWs) flextime, and telework. Hypotheses were tested on a sample of 16,145 employees with dependent care responsibilities. MANCOVA analysis was used with work arrangement as the independent variable and work interferes with family (WFC) and family interferes with work (FWC) as dependent variables. Work demands, non-work demands, income, job type and gender were entered into the analysis as covariates. The more flexible work arrangements such as flextime and telework were associated with higher levels of WFC than were fixed 9-to 5 and CWW schedules. Employees who teleworked reported higher FWC than their counterparts working a traditional 9-to-5 schedule particularly when work demands were high. The removal of both temporal and physical boundaries separating work and family domains results in higher levels of work-family interference in both directions. The results from this study suggest that policy makers and practitioners who are interested in improving employee well-being can reduce work-family conflict, and by extension improve employee mental health, by focusing on the effective use of traditional and CWW schedules rather than by implementing flextime and telework arrangements.

The effects of different source arrangement on the irradiation efficacy

International Nuclear Information System (INIS)

Liu Hongyue; Shi Peixin; Lin Yin

1999-01-01

The effects of 8 different arrangements with 16 pencil sources on irradiation productivity were studied by using a self-designed computer program. The results showed that the fashion of decentralized arrangement had a higher irradiation productivity than that of centralized in a static and uniform field

Micro-manufacturing: design and manufacturing of micro-products

National Research Council Canada - National Science Library

Koç, Muammer; Özel, Tuğrul

2011-01-01

.... After addressing the fundamentals and non-metallic-based micro-manufacturing processes in the semiconductor industry, it goes on to address specific metallic-based micro-manufacturing processes...

Design and application of reconfigurable manufacturing systems in agile mass customization manufacturing environment.

CSIR Research Space (South Africa)

Xing, B

2007-05-01

Full Text Available processes. Many manufacturing techniques are based on the principles of Flexible Manufacturing and Dedicated Manufacturing for mass production. Reconfigurable Manufacturing System, (RMS), is a manufacturing system that can provide for Agile Manufacturing...

IAEA, Fukushima Prefecture Sign Cooperation Memorandum

International Nuclear Information System (INIS)

2012-01-01

Full text: IAEA Director General Yukiya Amano and the Governor of Fukushima Prefecture, Yuhei Sato, today signed a Memorandum of Cooperation confirming their willingness to implement concrete projects to help alleviate the consequences of the accident at TEPCO's Fukushima Daiichi Nuclear Power Station. The Memorandum, signed on the sidelines of the three-day Fukushima Ministerial Conference on Nuclear Safety, includes arrangements to promote cooperation in two key areas: one on radiation monitoring and remediation between the IAEA and Fukushima Prefecture, and the other on human health between the IAEA and Fukushima Medical University. The Memorandum also highlights plans for a training centre in Fukushima Prefecture to help reinforce emergency preparedness and response activities, supported by the Government of Japan and Fukushima Prefecture. An IAEA Response and Assistance Network (RANET) Capacity Building Centre will be designated, with IAEA radiation monitoring equipment to be deployed in case of need, and to provide training in emergency preparedness and response in Japan and the Asia Pacific region. 'With this framework, the wisdom of the international community as well as the IAEA will be utilised in the process of reconstruction in Fukushima', said Japan's Minister of Foreign Affairs, Koichiro Gemba, who attended the signing ceremony. 'I'm very much encouraged by the conclusion of this Memorandum and I believe this will serve to promote reconstruction in Fukushima', said Governor Sato. 'We will also be able to disseminate to the rest of the world the knowledge and experience to be gained from the activities that we are conducting, and we hope this will be a symbol of Fukushima'. 'The IAEA has expertise in the areas of remediation and decontamination, as well as environmental monitoring and human health'. said Director General Amano. 'It is our hope that we will support Fukushima and at the same time serve as a bridge connecting the Prefecture and the world

When cooperation begets cooperation: the role of key individuals in galvanizing support.

Science.gov (United States)

McAuliffe, Katherine; Wrangham, Richard; Glowacki, Luke; Russell, Andrew F

2015-12-05

Life abounds with examples of conspecifics actively cooperating to a common end, despite conflicts of interest being expected concerning how much each individual should contribute. Mathematical models typically find that such conflict can be resolved by partial-response strategies, leading investors to contribute relatively equitably. Using a case study approach, we show that such model expectations can be contradicted in at least four disparate contexts: (i) bi-parental care; (ii) cooperative breeding; (iii) cooperative hunting; and (iv) human cooperation. We highlight that: (a) marked variation in contributions is commonplace; and (b) individuals can often respond positively rather than negatively to the contributions of others. Existing models have surprisingly limited power in explaining these phenomena. Here, we propose that, although among-individual variation in cooperative contributions will be influenced by differential costs and benefits, there is likely to be a strong genetic or epigenetic component. We then suggest that selection can maintain high investors (key individuals) when their contributions promote support by increasing the benefits and/or reducing the costs for others. Our intentions are to raise awareness in--and provide testable hypotheses of--two of the most poorly understood, yet integral, questions regarding cooperative ventures: why do individuals vary in their contributions and when does cooperation beget cooperation? © 2015 The Author(s).

Hydropolitical Complexes and Asymmetrical Power: Conflict, Cooperation, and Governance of International River Systems

Directory of Open Access Journals (Sweden)

Jenny R. Kehl

2015-08-01

Full Text Available Hydropolitical complexes are emerging to negotiate water-sharing policies that promote politicalstability, regional security, economic prosperity, and environmental sustainability. Yet interstatedisputes are occurring within most hydropolitical complexes, and weak riparians are oftencoerced to agree to water-sharing policies that adversely affect them. This research examines thestrategies weak riparians use to assert leverage in international river basins with asymmetricalpower, and the success of those strategies in achieving cooperation versus conflict. Grounded inthe theoretical framework of hydro hegemony, hard power, and soft power, this study uses crossnational analysis to test the effects of geographic, military, political, economic, technological,and external influence on water governance in eight international river systems. The resultsdemonstrate that weak riparians mobilize the assets and capacities of external actors, such asdonor countries and the World Bank, to increase their leverage within hydropolitical complexes.The study finds that strategies to balance hard power are largely ineffective; they fail to achievecooperative water-sharing arrangements and often exacerbate conflict. In contrast, strategies tobalance economic power and soft power, such as market access and political legitimacy, aremore successful in promoting cooperation and preventing conflict in hydropolitical complexes.

Cloud Manufacturing Service Paradigm for Group Manufacturing Companies

Directory of Open Access Journals (Sweden)

Jingtao Zhou

2014-07-01

Full Text Available The continuous refinement of specialization requires that the group manufacturing company must be constantly focused on how to concentrate its core resources in special sphere to form its core competitive advantage. However, the resources in enterprise group are usually distributed in different subsidiary companies, which means they cannot be fully used, constraining the competition and development of the enterprise. Conducted as a response to a need for cloud manufacturing studies, systematic and detailed studies on cloud manufacturing schema for group companies are carried out in this paper. A new hybrid private clouds paradigm is proposed to meet the requirements of aggregation and centralized use of heterogeneous resources and business units distributed in different subsidiary companies. After the introduction of the cloud manufacturing paradigm for enterprise group and its architecture, this paper presents a derivation from the abstraction of paradigm and framework to the application of a practical evaluative working mechanism. In short, the paradigm establishes an effective working mechanism to translate collaborative business process composed by the activities into cloud manufacturing process composed by services so as to create a foundation resulting in mature traditional project monitoring and scheduling technologies being able to be used in cloud manufacturing project management.

Intention recognition, commitment and their roles in the evolution of cooperation from artificial intelligence techniques to evolutionary game theory models

CERN Document Server

Han, The Anh

2013-01-01

This original and timely monograph describes a unique self-contained excursion that reveals to the readers the roles of two basic cognitive abilities, i.e. intention recognition and arranging commitments, in the evolution of cooperative behavior. This book analyses intention recognition, an important ability that helps agents predict others’ behavior, in its artificial intelligence and evolutionary computational modeling aspects, and proposes a novel intention recognition method. Furthermore, the book presents a new framework for intention-based decision making and illustrates several ways in which an ability to recognize intentions of others can enhance a decision making process. By employing the new intention recognition method and the tools of evolutionary game theory, this book introduces computational models demonstrating that intention recognition promotes the emergence of cooperation within populations of self-regarding agents. Finally, the book describes how commitment provides a pathway to the evol...

Dağıtım Kanallarında Üretici-Bayi İlişkilerinde Bağımlılık Kavramı ve Bağlılığın İşbirliği, Bağımlılık ve Memnuniyet Üzerine Etkileri = Dependence and its Iinfluences on Cooperation, Commitment and Satisfaction in Manufacturer-dealer Relationships in Distribution Channels

Directory of Open Access Journals (Sweden)

Bülent SEZEN

2002-01-01

Full Text Available In this study, we focus on the construct of dependence in working relationships between manufacturer firms and their distributors. We discuss the three facets of the dependence construct (transaction investments, replacability and importance and their specific effects on manufacturer-distributor relationships. Specifically, the links between dependence and some important relational outcomes (commitment, cooperation and satisfaction are investigated in detail. The hypotheses developed in the conceptual section of the study are tested using survey data collected from 192 automobile dealers in Turkey. Several implications of the study finding are presented.

46 CFR 199.110 - Survival craft muster and embarkation arrangements.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft muster and embarkation arrangements. 199... § 199.110 Survival craft muster and embarkation arrangements. (a) Each muster station must have... emergency source of electrical power. (e) Each davit-launched and free-fall survival craft muster station...

46 CFR 199.280 - Survival craft embarkation and launching arrangements.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft embarkation and launching arrangements... Cargo Vessels § 199.280 Survival craft embarkation and launching arrangements. (a) Each lifeboat must be.... (d) All survival craft required for abandonment by the total number of persons on board must be...

Causes and outcomes of customer satisfaction in business-to-business markets relationship marketing in the South African cement manufacturing industry

Directory of Open Access Journals (Sweden)

Phineas Mbango

2015-10-01

Full Text Available Close relationships between cement manufacturers and their customers in business-to-business markets are becoming a necessity in today’s competitive markets. The literature search reveals that, three constructs of relationship marketing (trust, commitment and satisfaction are the most studied and well known. This study contributes to the body of knowledge by adding two constructs (supplier competencies and communication as vital causes to customer satisfaction and the outcome being customer loyalty and cooperation. The study produced a framework of dimensions of relationship marketing in the South African Cement Industry and its hoped will help marketing managers in the industry and related sectors in coming up with relationship marketing strategies that can go a long way in helping them retain, attract, satisfy, and achieve long-term profitable relationships for both the supplier and the customer. A judgemental sample of major cement customers (362 throughout South Africa’s nine provinces were contacted using face-to-face interview technique with self-administered questionnaires. The results support the conceptual model presented; supplier competencies, trust, commitment and communication have a positive association with satisfaction; and satisfaction, in turn, relates positively to all the two outcomes of cooperation and loyalty. It is recommended that a cement manufacturer must invest in strategies that enhance trust, communication, commitment and supplier competencies in order to satisfy its customers who will in turn contribute to customer cooperation and loyalty.

Six-strut arrangements for cartesian movements of mirrors

International Nuclear Information System (INIS)

Noll, T.; Zeschke, Th.; Reichardt, G.; Lammert, H.; Gudat, W.

2001-01-01

At BESSY a new six-strut arrangement for general small travel mirror adjustment mechanisms has been developed. This patented (Patent DE 10042802.5) arrangement allows very simple movements in all six linear and rotational degrees of freedom. The movements of the mirror are simply determined by moving either one drive, or up to three drives by the same amount. The first mirror adjustment systems of this design is successfully in operation since the start of BESSY II. Their performance and reliability is very satisfactory. This contribution will present the concepts

Effect of playing violent video games cooperatively or competitively on subsequent cooperative behavior.

Science.gov (United States)

Ewoldsen, David R; Eno, Cassie A; Okdie, Bradley M; Velez, John A; Guadagno, Rosanna E; DeCoster, Jamie

2012-05-01

Research on video games has yielded consistent findings that violent video games increase aggression and decrease prosocial behavior. However, these studies typically examined single-player games. Of interest is the effect of cooperative play in a violent video game on subsequent cooperative or competitive behavior. Participants played Halo II (a first-person shooter game) cooperatively or competitively and then completed a modified prisoner's dilemma task to assess competitive and cooperative behavior. Compared with the competitive play conditions, players in the cooperative condition engaged in more tit-for-tat behaviors-a pattern of behavior that typically precedes cooperative behavior. The social context of game play influenced subsequent behavior more than the content of the game that was played.

Mixed Carbon Policies Based on Cooperation of Carbon Emission Reduction in Supply Chain

Directory of Open Access Journals (Sweden)

Yongwei Cheng

2017-01-01

Full Text Available This paper established cooperation decision model for a mixed carbon policy of carbon trading-carbon tax (environmental tax in a two-stage S-M supply chain. For three different cooperative abatement situations, we considered the supplier driven model, the manufacturer driven model, and the equilibrium game model. We investigated the influence of mixed carbon policy with constraint of reduction targets on supply chain price, productivity, profits, carbon emissions reduction rate, and so on. The results showed that (1 high-strength carbon policies do not necessarily encourage enterprises to effectively reduce emissions, and increasing market acceptance of low carbon products or raising the price of carbon quota can promote the benign reduction; (2 perfect competitive carbon market has a higher carbon reduction efficiency than oligarch carbon market, but their optimal level of cooperation is the same and the realized reduction rate is in line with the intensity of carbon policy; (3 the policy sensitivity of the carbon trading mechanism is stronger than the carbon tax; “paid quota mechanism” can subsidize the cost of abatement and improve reduction initiative. Finally, we use a numerical example to solve the optimal decisions under different market situations, validating the effectiveness of model and the conclusions.

Nuclear fuel in water reactors: Manufacturing technology, operational experience and development objectives in the Federal Republic of Germany

International Nuclear Information System (INIS)

Holzer, R.; Knoedler, D.

1977-01-01

The nuclear fuel industry in the Federal Republic of Germany comprises the full range of manufacturing capabilities for pressurized-, boiling- and heavy-water reactor technology. The existing manufacturing companies are Reaktor-Brennelement Union (RBU) and Alkem. RBU makes natural and enriched UO 2 -fuel assemblies, starting with powder preparation. Facilities to produce UO 2 -gadolinia and UO 2 -ThO 2 fuel are also available. Alkem manufactures mixed-oxide UO 2 /PuO 2 fuel and fuel rods. Zircaloy cladding tubes are produced by Nuklearrohr-Gesellschaft (NRG) and Mannesmannroehren-Werke (MRW). Construction of a new fuel manufacturing plant has been announced by Exxon. Supplementary to quality control, an integrated quality assurance system has been established between the reactor vendor's fuel design and engineering division and the existing manufacturing companies for fuel and tubing. Operating experience with LWR and HWR fuel dates back to 1964/65 and has shown good performance. Possible reasons for a small fraction of defective rods could be identified quickly by a fast feedback system incorporating close co-operation between Kraftwerk Union (KWU) and the utilities. KWU combines fuel development, hot-cell and pool-side service facilities as well as fuel technology linked to manufacturing. The responsibility of KWU for core and fuel design, which enabled an integral optimization, was also an important reason for the successful operation and design flexibility. (author)

Living arrangements in Western Europe: does cultural origin matter?

OpenAIRE

Giuliano, Paola

2006-01-01

Why are there such large differences in living arrangements across Western European countries? Conventional economic analyses have not been successful in explaining differences in living arrangements and particularly the dramatic increase in the fraction of young adults living with their parents in Mediterranean Europe. This paper presents a cultural interpretation. I argue that the sexual revolution of the 1970s - by liberalizing parental attitudes - had a differential impact on living arran...

Proto-cooperation

DEFF Research Database (Denmark)

Herbert-Read, James E; Romanczuk, Pawel; Krause, Stefan

2016-01-01

beneficial if the cost of attacking is high, and only then when waiting times are short. Our findings provide evidence that cooperative benefits can be realized through the facilitative effects of individuals' hunting actions without spatial coordination of attacks. Such 'proto-cooperation' may be the pre...

Cooperating to learn teaching to cooperate: adviser processes for program implement CA/AC

Directory of Open Access Journals (Sweden)

José Ramón LAGO

2011-11-01

Full Text Available The aim of this paper is present some results of advise strategy to introduce cooperative learning from the «Cooperating to Learn/ Learning to Cooperate» CL/LC Programme. The first part situates the research project and the research objective focused on how introduction of CL/LC program through a process of advice facilitates permanent improvements to the inclusion of students. In the second we analyzed the phases and tasks of an adviser process for the introduction of cooperative learning and three stages to build on cooperative learning in school: the introduction, generalization and consolidation. The third part is the central part. We describe five process of adviser to implement cooperative learning which we can observe different degrees and modalities of collaboration between teachers and counselors and between teachers. Is possible the first step of a network centers to work cooperatively.

FY 2001 report on the integrated evaluation of the research cooperation project. Research cooperation program on the development of environmental measurement use laser radar/research cooperation project on the mining waste water treatment technology using biology; 2001 nendo kenkyu kyoryoku jigyo sogo hyoka hokokusho. Kankyo kesokuyo reza reda no kaihatsu ni kansuru kenkyu kyoryoku - Baio riyo ni yoru kohaisui shori gijutsu ni kansuru kenkyu kyoryoku

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-03-01

By research groups having been sent, the integrated evaluation was made of the projects on the research cooperation with Indonesia in the development of environmental measurement use laser radar and the research cooperation with China in the mining waste water treatment technology using biology. As to the research cooperation with Indonesia, the purpose/target proposed were almost achieved, and all were favorably carried out. Especially, after finishing the project, the design/manufacture of an on-vehicle type Mie-scattering laser radar were made using the acquired laser technology. And, it was reported that an observation study of the state of air pollution in Bandung city was made using the laser radar. It can be said that generally the research cooperation with China was smoothly proceeded with. However, the Wushan mine is small in scale of management, and therefore, there might have been some points to be reviewed in selection of the mine for research. The pilot plant installed at the Wushan mine is not now operated. If the mine has strong management force, the effective use of the pilot plant after finishing the project might have been studied. (NEDO)

Manufacturing Renaissance : Return of manufacturing to western countries

OpenAIRE

Kianian, Babak; Larsson, Tobias; Tavassoli, Mohammad

2013-01-01

This chapter argues that the location of manufacturing is gradually shifting to the west again, exemplifying the ‘manufacturing renaissance’. Such a claim is based on the recent observed trend and the discussion is contextualized within the established theory that has been able to explain the location of manufacturing, that is, the product life cycle (PLC) model. Then the chapter identifies and discusses the four main drivers of this new phenomenon: (i) rising wage levels in emerging economie...

Confidence building in Northeast Asia: Possible first steps for cooperation on the Korean peninsula

Energy Technology Data Exchange (ETDEWEB)

Vannoni, M.; Biringer, K.

1997-11-01

International relations are often devoted to establishing agreements that define, control, or regulate issues of potential conflict or dispute. These agreements span a full range of national and international issues from human rights to resource allocations and national security. The scope of these agreements can vary from bilateral arrangements to global treaties or control regimes. In many cases, elements of the agreement are monitored to verify compliance or increase confidence among parties that the terms of the agreement are being met. This article outlines options for cooperation on the Korean peninsula that could build confidence and reduce tension. The role of monitoring technology in helping to implement such agreements is also described.

Measuring Manufacturing Innovativeness

DEFF Research Database (Denmark)

Blichfeldt, Henrik; Knudsen, Mette Præst

2017-01-01

Globalization and customization increases the pressure on manufacturing companies, and the ability to provide innovativeness is a potential source of competitive advantage. This paper positions the manufacturing entity in the innovation process, and investigates the relation between innovation vers...... technology and organizational concepts. Based on Danish survey data from the European Manufacturing Survey (EMS-2015) this paper finds that there is a relation between innovative companies, and their level of technology and use of organizational concepts. Technology and organizational concepts act...... as manufacturing levers to support the manufacturing and production system to provide innovativeness. The managerial implication lies in building manufacturing capabilities to support the innovative process, by standardization, optimization and creating stability in combination with automation and advanced...

Cooperative Trust Games

Science.gov (United States)

2013-01-01

the more widely recognized competitive (non-cooperative) game theory. Cooperative game theory focuses on what groups of self-interested agents can...provides immediate justification for using non-cooperative game theory as the basis for modeling the purely competitive agents. 2.4. Superadditive...the competitive and altruistic contributions of the subset team. Definition: Given a payoff function ( ) in a subset team game , the total marginal

Recent trends in the world political situation, globalization and prospects for cooperation in the energy sector in Northeast Korea

Energy Technology Data Exchange (ETDEWEB)

Vlctor Ishaev [Government of Khabarovsk Territory, Khabarovsk (Russian Federation)

2002-07-01

Energy importers in the region are now looking for alternative energy resources and it is quite logical that Russia, its Far Eastern region and Eastern Siberia could become active players. In my opinion, the level of complementarity of interests is high. Russia has all the necessary geopolitical and economic prerequisites for entering the energy markets of the Asia-Pacific region. Our country has advanced several proposals with regard to the delivery of oil, natural gas and electric power to the economies of this region. To arrange an effective delivery system for these resources we need adequate economic conditions and an engineering infrastructure that connects both the countries and the territories of Northeast Asia. One of the main tasks of this workshop is to promote the processes of cooperation between the countries of Northeast Asia and the Asia-Pacific Region. The rich variety of participants provides us with a good foundation for active, creative and fruitful discussions focused on the important problems of economic and investment cooperation. We have all the necessary prerequisites to expect that this meeting will become another important step forward in developing energy cooperation. 5 tabs.

Process validation for the manufacturing of Tc-99m generator at Nuclear Malaysia

International Nuclear Information System (INIS)

Noriah Jamal; Rehir Dahlan; Wan Anuar Wan Awang; Zakaria Ibrahim; Shaaban Kassim; Wan Firdaus Wan Ishak; Nelly Bo Nai Lee; Noraisyah Yusof; Siti Selina Abdul Hamid; Ng Yen; Rahimah Abdul Rahim; Muhammad Hanafi Mohamad Mokhtar; Azahari Kasbollah; Abd Jalil Abd Hamid; Yahya Talib; Shafii Khamis; Zulkifli Mohamed Hashim

2007-01-01

Process validation provides the best platform in identifying potential problems in the actual radiopharmaceuticals manufacturing work. The purpose of this paper is to present experience in performing process validation for the manufacturing of Tc-99m generator at Nuclear Malaysia. Process validation for the manufacturing of Tc-99m generator was done by performing four try runs, between October 2006 to April 2007. It was done using saline instead of the actual product. Each try run took four days to complete. On day 1, clean room was cleaned and disinfected. On day 2, activity of washing and sterilization of utensils, columns, rubber stoppers and aluminium caps was carried out. On day 3, preparation of white top, alumina packed column and mixing solutions was performed. Apparatus was also sent for sterilizing test. On day 4, the actual production day of the try run by impregnating column with sterile saline was performed. Prior to the manufacturing activities, particle counts measurement and area clearance were performed to ensure that the temperature and humidity of the clean room are suitable for the production work. Settle plates were placed at the identified positions including in the Hot Cell. Personnel's finger print was performed before and after production work by using touch plates. After completion of try run, elution from the generators that been manufactured, settle and touch plates were sent to quality control unit for the microbiological test. It took fourteen days to get the test results. The first try run was failed, which may be due to insufficient of proper arrangement/preparation of work. It may also due to problem of cleaning/disinfection of clean room, which may not be done properly. The further three consecutive try runs meet all the specifications including the sterility test, endotoxin test and finger prints. It shows that the manufacturing of Tc-99m generator at Nuclear Malaysia is validated and ready for the active run. (Author)

46 CFR 199.40 - Evaluation, testing and approval of lifesaving appliances and arrangements.

Science.gov (United States)

2010-10-01

... appliances and arrangements. 199.40 Section 199.40 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) LIFESAVING APPLIANCES AND ARRANGEMENTS LIFESAVING SYSTEMS FOR CERTAIN INSPECTED VESSELS General § 199.40 Evaluation, testing and approval of lifesaving appliances and arrangements. (a) Each item of...

Cooperative strategies European perspectives

CERN Document Server

Killing, J Peter

1997-01-01

Cooperative Strategies: European Perspectives is one of three geographically targeted volumes in which the contributors present the most current research on topics such as advances in theories of cooperative strategies, the formation of cooperative alliances, the dynamics of partner relationships, and the role of information and knowledge in cooperative alliances. Blending conceptual insights with empirical analyses, the contributors highlight commonalities and differences across national, cultural, and trade zones. The chapters in this volume are anchored in a wide set of theoretical approaches, conceptual frameworks, and models, illustrating how rich the area of cooperative strategies is for scholarly inquiry.

Do organizational and political-legal arrangements explain financial wrongdoing?

Science.gov (United States)

Prechel, Harland; Zheng, Lu

2016-12-01

The 2008 financial crisis was a systemic problem with deep-rooted structural causes that created opportunities to engage in financial malfeasance, a form of corporate wrongdoing. However, few quantitative studies exist on the effects of organizational and political-legal arrangements on financial malfeasance. In this paper, we examine the effects of organizational and political-legal arrangements that emerged in the 1990s in the FIRE sector (i.e., financial, insurance, and real estate) on financial malfeasance. Our historical contextualization demonstrates how changes in the political-legal arrangements facilitate the emergence of new corporate structures and opportunities for financial malfeasance. Our longitudinal quantitative analysis demonstrates that US FIRE sector corporations with a more complex organizational structure, larger size, lower dividend payment, and higher executive compensation are more prone to commit financial malfeasance. © London School of Economics and Political Science 2016.

Cooperatives management evaluation of four Savings and Credit Cooperatives of Quito, Ecuador

Directory of Open Access Journals (Sweden)

Richard Joel Alba Caluguillin

2017-07-01

Full Text Available The administrative management in cooperative enterprises develops in each of the stages of the administrative process of the traditional companies, which are planning, organization, direction and control, with the only difference that the savings and credit cooperatives comply with cooperative principles and values such as mutual aid, social responsibility, democracy, equality, equity and solidarity. The objective of this research was to evaluate the process of administrative management in four selected savings and credit cooperatives from Quito city, Ecuador, were applied theoretical and empirical methods of research. From the empirical point of view, a survey was applied getting results from this process. In general, in the cooperatives evaluated, it was recognized the importance of comprehensive management, strategic planning, motivation as a key element for good job performance, the effectiveness of formal communication channels and other aspects inherent in administrative management, although there are certain deficiencies that limit the results of the cooperative activity.

29 CFR 779.232 - Franchise or other arrangements which create a larger enterprise.

Science.gov (United States)

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Franchise or other arrangements which create a larger... Apply; Enterprise Coverage Leased Departments, Franchise and Other Business Arrangements § 779.232 Franchise or other arrangements which create a larger enterprise. (a) In other instances, franchise...

Inertia in Cooperative Remodeling

OpenAIRE

Nilsson, Jerker

1997-01-01

Which organization model is appropriate for a cooperative enterprise depends on the prerequisites in its business environment. When conditions are changing, the firm must adapt itself. The entry of Sweden, Finland, and Austria into the European Union led to radical changes for agricultural cooperation, especially for Swedish cooperatives since agricultural policy was not allowed a transitional period. After two years, Swedish cooperatives have still not adapted their organization model despit...

Power distribution arrangement

DEFF Research Database (Denmark)

2010-01-01

An arrangement and a method for distributing power supplied by a power source to two or more of loads (e.g., electrical vehicular systems) is disclosed, where a representation of the power taken by a particular one of the loads from the source is measured. The measured representation of the amount...... of power taken from the source by the particular one of the loads is compared to a threshold to provide an overload signal in the event the representation exceeds the threshold. Control signals dependant on the occurring of the overload signal are provided such that the control signal decreases the output...... power of the power circuit in case the overload signal occurs...

Cloud manufacturing distributed computing technologies for global and sustainable manufacturing

CERN Document Server

Mehnen, Jörn

2013-01-01

Global networks, which are the primary pillars of the modern manufacturing industry and supply chains, can only cope with the new challenges, requirements and demands when supported by new computing and Internet-based technologies. Cloud Manufacturing: Distributed Computing Technologies for Global and Sustainable Manufacturing introduces a new paradigm for scalable service-oriented sustainable and globally distributed manufacturing systems.   The eleven chapters in this book provide an updated overview of the latest technological development and applications in relevant research areas.  Following an introduction to the essential features of Cloud Computing, chapters cover a range of methods and applications such as the factors that actually affect adoption of the Cloud Computing technology in manufacturing companies and new geometrical simplification method to stream 3-Dimensional design and manufacturing data via the Internet. This is further supported case studies and real life data for Waste Electrical ...

JIT Manufacturing: A Survey of Implementations in Small and Large U.S. Manufacturers

OpenAIRE

Richard E. White; John N. Pearson; Jeffrey R. Wilson

1999-01-01

Since the early 1980s, the diffusion of Just-In-Time (JIT) manufacturing from Japanese manufacturers to U.S. manufacturers has progressed at an accelerated rate. At this stage of the diffusion process, JIT implementations are more common and more advanced in large U.S. manufacturers than in small; consequently, U.S. businessmen's understanding of issues associated with JIT implementations in large manufacturers is more developed than that of small manufacturers. When small manufacturers repre...