WorldWideScience

Sample records for conversion electron emitter

  1. The role of electron-emitting radiopharmaceuticals in the palliative treatment of metastatic bone pain and for radiosynovectomy: applications of conversion electron emitter Tin-117m

    Directory of Open Access Journals (Sweden)

    Suresh C. Srivastava

    2007-09-01

    Full Text Available A variety of radionuclides continue to be investigated and/or clinically used for different therapeutic applications in nuclear medicine. The choice of a particular radionuclide with regard to appropriate emissions, linear energy transfer (LET, and physical half-life, etc., is dictated to a large extent by the character of the disease (e.g., solid tumor or metastatic disease, and by the carrier to selectively transport the radionuclide to the desired site. An impressive body of information has appeared in the recent literature that addresses many of these considerations. This article summarizes and discusses the role of high-LET electron emitters and their advantage in the treatment of cancer or for other disorders in specific situations. Areas such as bone pain palliation, bone malignancy therapy, and radiation synovectomy are covered in greater detail. Projections are made as to the future directions and progress in these areas. A discussion of the various issues related to the selection criteria that are useful for choosing the appropriate radionuclide for a particular application is included. Use of high-LET electron emitters is discussed in greater detail, with particular emphasis on the use of conversion electron emitter tin-117m for various therapeutic applications.Uma variedade de radionuclídeos continua a ser investigada e/ou clinicamente utilizada para diferentes aplicações terapêuticas em medicina nuclear. A escolha de um radionuclídeo, considerando-se sua emissão apropriada, transferência linear de energia (LET e meia-vida física é determinada na maior parte pelo caráter da doença (p.ex., tumor sólido ou doença metastática, e pelo carreador que transporta o radionuclídeo seletivamente para o sítio desejado. Um notável conjunto de informações voltadas para essas considerações tem aparecido na literatura recente. Esse trabalho resume e discute o papel de emissores de elétrons de alta-LET e sua vantagem no

  2. Electric field distribution of electron emitter surfaces

    Science.gov (United States)

    Tagawa, M.; Takenobu, S.; Ohmae, N.; Umeno, M.

    1987-03-01

    The electric field distribution of a tungsten field emitter surface and a LaB6 thermionic emitter surface has been studied. The computer simulation of electric field distribution on the emitter surface was carried out with a charge simulation method. The electric field distribution of the LaB6 thermionic emitter was experimentally evaluated by the Schottky plot. Two independent equations are necessary for obtaining local electric field and work function; the Fowler-Nordheim equation and the equation of total energy distribution of emitted electron being used to evaluate the electric field distribution of the tungsten field emitter. The experimental results agreed with the computer simulation.

  3. Low Emittance Electron Beam Studies

    Energy Technology Data Exchange (ETDEWEB)

    Tikhoplav, Rodion [Univ. of Rochester, NY (United States)

    2006-01-01

    We have studied the properties of a low emittance electron beam produced by laser pulses incident onto an rf gun photocathode. The experiments were carried out at the A0 photoinjector at Fermilab. Such beam studies are necessary for fixing the design of new Linear Colliders as well as for the development of Free Electron Lasers. An overview of the A0 photoinjector is given in Chapter 1. In Chapter 2 we describe the A0 photoinjector laser system. A stable laser system is imperative for reliable photoinjector operation. After the recent upgrade, we have been able to reach a new level of stability in the pulse-to-pulse fluctuations of the pulse amplitude, and of the temporal and transverse profiles. In Chapter 3 we present a study of transverse emittance versus the shape of the photo-cathode drive-laser pulse. For that purpose a special temporal profile laser shaping device called a pulse-stacker was developed. In Chapter 4 we discuss longitudinal beam dynamics studies using a two macro-particle bunch; this technique is helpful in analyzing pulse compression in the magnetic chicane, as well as velocity bunching effects in the rf-gun and the 9-cell accelerating cavity. In Chapter 5 we introduce a proposal for laser acceleration of electrons. We have developed a laser functioning on the TEM*01 mode, a mode with a longitudinal electric field component which is suitable for such a process. Using this technique at energies above 40 MeV, one would be able to observe laser-based acceleration.

  4. An ultracold low emittance electron source

    CERN Document Server

    Xia, G; Murray, A J; Bellan, L; Bertsche, W; Appleby, R B; Mete, O; Chattopadhyay, S

    2014-01-01

    Ultracold atom-based electron sources have recently been proposed as an alternative to the conventional photo-injectors or thermionic electron guns widely used in modern particle accelerators. The advantages of ultracold atom-based electron sources lie in the fact that the electrons extracted from the plasma (created from near threshold photo-ionization of ultracold atoms) have a very low temperature, i.e. down to tens of Kelvin. Extraction of these electrons has the potential for producing very low emittance electron bunches. These features are crucial for the next generation of particle accelerators, including free electron lasers, plasma-based accelerators and future linear colliders. The source also has many potential direct applications, including ultrafast electron diffraction (UED) and electron microscopy, due to its intrinsically high coherence. In this paper, the basic mechanism of ultracold electron beam production is discussed and our new research facility for an ultracold, low emittance electron s...

  5. Emittance growth from electron beam modulation

    Energy Technology Data Exchange (ETDEWEB)

    Blaskiewicz, M.

    2009-12-01

    In linac ring colliders like MeRHIC and eRHIC a modulation of the electron bunch can lead to a modulation of the beam beam tune shift and steering errors. These modulations can lead to emittance growth. This note presents simple formulas to estimate these effects which generalize some previous results.

  6. A new method of emittance measurement for electron beams from the Micro-emitter

    Energy Technology Data Exchange (ETDEWEB)

    Ishizuka, Hiroshi [Fukuoka Inst. of Technology (Japan); Nakahara, Yuriko; Kawasaki, Sunao; Musyoki, Stephen; Shimizu, Hiroshi; Watanabe, Akihiko; Shiho, Makoto

    1994-03-01

    Recently a new type of cathode called Micro-emitter is in progress. This cathode is micro fabricated field emitter having the characteristics of very low emittance and high brightness. We can not measure the emittance of the cathode with conventional method like pepper-pot method. The reasons are ; 1. The angle between the electron orbit and the axis is very small. ; and 2. We can not focus the electron beam in the vacuum or on the surface of the material since the current density of the cathode is extremely high. For the emittance measurement for such low emittance and high brightness cathode, we need to expand the beam, and measure the beam cross section without any slits or apertures. We study and propose a new emittance measurement method for the Micro-emitter. (author).

  7. Large-area lanthanum hexaboride electron emitter

    Science.gov (United States)

    Goebel, D. M.; Hirooka, Y.; Sketchley, T. A.

    1985-09-01

    The characteristics of lanthanum-boron thermionic electron emitters are discussed, and a large-area, continuously operating cathode assembly and heater are described. Impurity production and structural problems involving the support of the LaB6 have been eliminated in the presented configuration. The performance of the cathode in a plasma discharge, where surface modification occurs by ion sputtering, is presented. Problem areas which affect lifetime and emission current capability are discussed.

  8. Evaluations of carbon nanotube field emitters for electron microscopy

    Science.gov (United States)

    Nakahara, Hitoshi; Kusano, Yoshikazu; Kono, Takumi; Saito, Yahachi

    2009-11-01

    Brightness of carbon nanotube (CNT) emitters was already reported elsewhere. However, brightness of electron emitter is affected by a virtual source size of the emitter, which strongly depends on electron optical configuration around the emitter. In this work, I- V characteristics and brightness of a CNT emitter are measured under a practical field emission electron gun (e-gun) configuration to investigate availability of CNT for electron microscopy. As a result, it is obtained that an emission area of MWNT is smaller than its tip surface area, and the emission area corresponds to a five-membered-ring with 2nd nearest six-membered-rings on the MWNT cap surface. Reduced brightness of MWNT is measured as at least 2.6×109 A/m 2 sr V. It is concluded that even a thick MWNT has enough brightness under a practical e-gun electrode configuration and suitable for electron microscopy.

  9. Evaluations of carbon nanotube field emitters for electron microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Nakahara, Hitoshi, E-mail: nakahara@nagoya-u.jp [Department of Quantum Engineering, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603 (Japan); Kusano, Yoshikazu; Kono, Takumi; Saito, Yahachi [Department of Quantum Engineering, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603 (Japan)

    2009-11-30

    Brightness of carbon nanotube (CNT) emitters was already reported elsewhere. However, brightness of electron emitter is affected by a virtual source size of the emitter, which strongly depends on electron optical configuration around the emitter. In this work, I-V characteristics and brightness of a CNT emitter are measured under a practical field emission electron gun (e-gun) configuration to investigate availability of CNT for electron microscopy. As a result, it is obtained that an emission area of MWNT is smaller than its tip surface area, and the emission area corresponds to a five-membered-ring with 2nd nearest six-membered-rings on the MWNT cap surface. Reduced brightness of MWNT is measured as at least 2.6x10{sup 9} A/m{sup 2} sr V. It is concluded that even a thick MWNT has enough brightness under a practical e-gun electrode configuration and suitable for electron microscopy.

  10. Emittance measurements of the CLIO electron beam

    Science.gov (United States)

    Chaput, R.; Devanz, G.; Joly, P.; Kergosien, B.; Lesrel, J.

    1997-02-01

    We have designed a setup to measure the transverse emittance at the CLIO accelerator exit, based on the "3 gradients" method. The beam transverse size is measured simply by scanning it with a steering coil across a fixed jaw and recording the transmitted current, at various quadrupole strengths. A code then performs a complete calculation of the emittance using the transfer matrix of the quadrupole instead of the usual classical lens approximation. We have studied the influence of various parameters on the emittance: Magnetic field on the e-gun and the peak current. We have also improved a little the emittance by replacing a mismatched pipe between the buncher and accelerating section to avoid wake-field effects; The resulting improvements of the emittance have led to an increase in the FEL emitted power.

  11. Bunch transverse emittance increase in electron storage rings

    Institute of Scientific and Technical Information of China (English)

    GAO Jie

    2009-01-01

    In this paper a theoretical framework to estimate the bunch transverse emittance growing in electron storage rings due to short range transverse wakefield of the machine is established. New equilibrium emittance equations are derived and applied to explain the experimentally obtained results in ATF damping ring. This equation will be useful for linear collider damping ring design.

  12. Electronic Warfare:Issues and Challenges for Emitter Classification

    Directory of Open Access Journals (Sweden)

    Manish Gupta

    2011-04-01

    Full Text Available Electronic warfare (EW is an important capability that provides advantage to defence forces over their adversaries. Defence forces gather tactical intelligence through EW sensors, which provide the means to counter hostile actions of enemy forces. Functions of an EW system is threat detection and the area surveillance so as to determine the identity of surrounding emitters. Emitter classification system identifies possible threats by analysing intercepted signals. Problem of identifying emitters based on its intercepted signal characteristics is a challenging problem in electronic warfare studies. Major issues and challenges for emitter classification such as drifting of emitter parameters due to aging, operational characteristic of an emitter, i.e., same emitter can operate on multiple bands and multiple pulse repetition frequencies (PRFs are highlighted. A novel approach based on some well-known statistical methods, e.g., regression analysis, hypothesis testing, and discriminent analysis is proposed. The effectiveness of the proposed approach has been tested over ELINT (Electronic Intelligence data and illustrated using simulation data. The proposed approach can play a solution for wide variety of problems in emitter classification in electronic warfare studies.Defence Science Journal, 2011, 61(3, pp.228-234, DOI:http://dx.doi.org/10.14429/dsj.61.529

  13. Innovative energy efficient low-voltage electron beam emitters

    Science.gov (United States)

    Felis, Kenneth P.; Avnery, Tovi; Berejka, Anthony J.

    2002-03-01

    Advanced electron beams (AEB) has developed a modular, low voltage (80-125 keV), high beam current (up to 40 ma), electron emitter with typically 25 cm of beam width, that is housed in an evacuated, returnable chamber that is easy to plug in and connect. The latest in nanofabrication enables AEB to use an ultra-thin beam window. The power supply for AEB's emitter is based on solid-state electronics. This combination of features results in a remarkable electrical efficiency. AEB's electron emitter relies on a touch screen, computer control system. With 80 μm of unit density beam penetration, AEB's electron emitter has gained market acceptance in the curing of opaque, pigmented inks and coatings used on flexible substrates, metals and fiber composites and in the curing of adhesives in foil based laminates.

  14. Electron Emission from Ultra-Large Area MOS Electron Emitters

    DEFF Research Database (Denmark)

    Thomsen, Lasse Bjørchmar; Nielsen, Gunver; Vendelbo, Søren Bastholm;

    2009-01-01

    Ultralarge metal-oxide-semiconductor (MOS) devices with an active oxide area of 1 cm2 have been fabricated for use as electron emitters. The MOS structures consist of a Si substrate, a SiO2 tunnel barrier (~5 nm), a Ti wetting layer (3–10 Å), and a Au top layer (5–60 nm). Electron emission from...... layer is varied from 3 to 10 Å which changes the emission efficiency by more than one order of magnitude. The apparent mean free path of ~5 eV electrons in Au is found to be 52 Å. Deposition of Cs on the Au film increased the electron emission efficiency to 4.3% at 4 V by lowering the work function....... Electron emission under high pressures (up to 2 bars) of Ar was observed. ©2009 American Vacuum Society...

  15. Conversion electron surface imaging

    CERN Document Server

    Irwin, G M; Wehner, A

    1999-01-01

    A method of imaging the Moessbauer absorption over the surface of a sample based on counting conversion electrons emitted from the surface following resonant absorption of gamma radiation is described. This Conversion Electron Surface Imaging (CESI) method is somewhat analogous to Magnetic Resonance Imaging (MRI), particularly chemical shift imaging, and similar tomographic reconstruction techniques are involved in extracting the image. The theory behind the technique and a prototype device is described, as well as the results of proof-of-principle experiments which demonstrate the function of the device. Eventually this same prototype device will be part of a system to determine the spatial variation of the Moessbauer spectrum over the surface of a sample. Applications include imaging of variations of surface properties of steels and other iron containing alloys, as well as other surfaces over which sup 5 sup 7 Fe has been deposited.

  16. Low-emittance tuning at the Cornell Electron Storage Ring

    CERN Document Server

    Shanks, James; Sagan, David

    2013-01-01

    In 2008 the Cornell Electron/Positron Storage Ring (CESR) was reconfigured from an electron/positron collider to serve as a testbed for the International Linear Collider (ILC) damping rings. One of the primary goals of the CESR Test Accelerator (CesrTA) project is to develop low emittance tuning techniques to achieve sub-10pm geometric vertical emittance at 2.085 GeV. This paper discusses the tuning methods used at CesrTA to achieve low-emittance conditions. A minimum vertical emittance of 8.7 +2.9/-3.4(sys) +/-0.2(stat) pm has been achieved at 2.085 GeV. In various configurations and beam energies the correction technique routinely achieves vertical emittance <15 pm after correction. Beam-based measurement and correction requires about 15 minutes. Simulations modeling the effects of magnet misalignments, BPM errors, and emittance correction algorithm suggest the residual vertical emittance measured at the conclusion of the tuning procedure is dominated by sources other than optics errors and misalignments...

  17. Emittance measurements for the Illinois/CEBAF polarized electron source

    Energy Technology Data Exchange (ETDEWEB)

    Dunham, B.M.; Cardman, L.S. [Illinois Univ., Urbana, IL (United States); Sinclair, C.K. [Continuous Electron Beam Accelerator Facility, Newport News, VA (United States)

    1995-01-01

    The transverse thermal properties of the electrons photoemitted from GaAs determine the intrinsic beam emittance, an important quantity in applications such as polarized electron sources and high-brightness sources. In this paper, emittance measurements using the Illinois/CEBAF polarized electron source are described. The emittance was measured as a function of both the laser beam spot size and laser wavelength at low currents. The data was used to infer the transverse thermal energy of the electrons photoemitted from GaAs for wavelengths between 514 and 840 nm. Near the bandgap the transverse energy is {approximately}34 meV, a factor of 3 lower than that of the beam from a typical thermionic electron gun. 8 refs., 2 figs.

  18. Emittance minimization at the ELBE superconducting electron gun

    Energy Technology Data Exchange (ETDEWEB)

    Moeller, K.; Arnold, A.; Lu, P.; Murcek, P.; Teichert, J.; Vennekate, H.; Xiang, R.

    2014-07-01

    The transverse emittance is one of the most important quantities which characterize the quality of an electron source. For high quality experiments low beam emittance is required. By means of theoretical considerations and simulation calculations we have studied how the emittance of the Rossendorf superconducting radio-frequency photoelectron source (SRF gun) can be minimized. It turned out that neither a solenoid magnet nor the effect of space charge forces is needed to create a pronounced emittance minimum. The minimum appears by just adjusting the starting phase of the electron bunch with respect to the RF phase of the gun in a suitable way. Investigation of various correlations between the properties of the beam particles led to an explanation on how the minimum comes about. It is shown that the basic mechanism of minimization is the fact that the longitudinal properties of the particles (energy) are strongly influenced by the starting phase. Due to the coupling of the longitudinal and transverse degrees of freedom by the relativistic equation of motion the transverse degrees of freedom and thereby the emittance can be strongly influenced by the starting phase as well. The results obtained in this study will be applied to minimize the emittance in the commissioning phase of the SRF gun.

  19. Industrial application of electron sources with plasma emitters

    CERN Document Server

    Belyuk, S I; Rempe, N G

    2001-01-01

    Paper contains a description, operation, design and parameters of electron sources with plasma emitters. One presents examples of application of these sources as part of automated electron-beam welding lines. Paper describes application of such sources for electron-beam deposition of composite powders. Electron-beam deposition is used to rebuild worn out part and to increase strength of new parts of machines and tools. Paper presents some examples of rebuilding part and the advantages gained in this case

  20. A chip-scale, telecommunications-band frequency conversion interface for quantum emitters.

    Science.gov (United States)

    Agha, Imad; Ates, Serkan; Davanço, Marcelo; Srinivasan, Kartik

    2013-09-09

    We describe a chip-scale, telecommunications-band frequency conversion interface designed for low-noise operation at wavelengths desirable for common single photon emitters. Four-wave-mixing Bragg scattering in silicon nitride waveguides is used to demonstrate frequency upconversion and downconversion between the 980 nm and 1550 nm wavelength regions, with signal-to-background levels > 10 and conversion efficiency of ≈ -60 dB at low continuous wave input pump powers ( 25 % in existing geometries. Finally, we present waveguide designs that can be used to connect shorter wavelength (637 nm to 852 nm) quantum emitters with 1550 nm.

  1. Emittance Measurements from a Laser Driven Electron Injector

    Energy Technology Data Exchange (ETDEWEB)

    Reis, David A

    2003-07-28

    The Gun Test Facility (GTF) at the Stanford Linear Accelerator Center was constructed to develop an appropriate electron beam suitable for driving a short wavelength free electron laser (FEL) such as the proposed Linac Coherent Light Source (LCLS). For operation at a wavelength of 1.5 {angstrom}, the LCLS requires an electron injector that can produce an electron beam with approximately 1 {pi} mm-mrad normalized rms emittance with at least 1 nC of charge in a 10 ps or shorter bunch. The GTF consists of a photocathode rf gun, emittance-compensation solenoid, 3 m linear accelerator (linac), drive laser, and diagnostics to measure the beam. The rf gun is a symmetrized 1.6 cell, s-band high gradient, room temperature, photocathode structure. Simulations show that this gun when driven by a temporally and spatially shaped drive laser, appropriately focused with the solenoid, and further accelerated in linac can produce a beam that meets the LCLS requirements. This thesis describes the initial characterization of the laser and electron beam at the GTF. A convolved measurement of the relative timing between the laser and the rf phase in the gun shows that the jitter is less than 2.5 ps rms. Emittance measurements of the electron beam at 35 MeV are reported as a function of the (Gaussian) pulse length and transverse profile of the laser as well as the charge of the electron beam at constant phase and gradient in both the gun and linac. At 1 nC the emittance was found to be {approx} 13 {pi} mm-mrad for 5 ps and 8 ps long laser pulses. At 0.5 nC the measured emittance decreased approximately 20% in the 5 ps case and 40% in the 8 ps case. These measurements are between 40-80% higher than simulations for similar experimental conditions. In addition, the thermal emittance of the electron beam was measured to be 0.5 {pi} mm-mrad.

  2. Intrinsic normalized emittance growth in laser-driven electron accelerators

    Science.gov (United States)

    Migliorati, M.; Bacci, A.; Benedetti, C.; Chiadroni, E.; Ferrario, M.; Mostacci, A.; Palumbo, L.; Rossi, A. R.; Serafini, L.; Antici, P.

    2013-01-01

    Laser-based electron sources are attracting strong interest from the conventional accelerator community due to their unique characteristics in terms of high initial energy, low emittance, and significant beam current. Extremely strong electric fields (up to hundreds of GV/m) generated in the plasma allow accelerating gradients much higher than in conventional accelerators and set the basis for achieving very high final energies in a compact space. Generating laser-driven high-energy electron beam lines therefore represents an attractive challenge for novel particle accelerators. In this paper we show that laser-driven electrons generated by the nowadays consolidated TW laser systems, when leaving the interaction region, are subject to a very strong, normalized emittance worsening which makes them quickly unusable for any beam transport. Furthermore, due to their intrinsic beam characteristics, controlling and capturing the full beam current can only be achieved improving the source parameters.

  3. Electron Cloud at Low Emittance in CesrTA

    CERN Document Server

    Palmer, Mark; Billing, Michael; Calvey, Joseph; Conolly, Christopher; Crittenden, James; Dobbins, John; Dugan, Gerald; Eggert, Nicholas; Fontes, Ernest; Forster, Michael; Gallagher, Richard; Gray, Steven; Greenwald, Shlomo; Hartill, Donald; Hopkins, Walter; Kreinick, David; Kreis, Benjamin; Leong, Zhidong; Li, Yulin; Liu, Xianghong; Livezey, Jesse; Lyndaker, Aaron; Makita, Junki; McDonald, Michael; Medjidzade, Valeri; Meller, Robert; O'Connell, Tim; Peck, Stuart; Peterson, Daniel; Ramirez, Gabriel; Rendina, Matthew; Revesz, Peter; Rider, Nate; Rice, David; Rubin, David; Sagan, David; Savino, James; Schwartz, Robert; Seeley, Robert; Sexton, James; Shanks, James; Sikora, John; Smith, Eric; Strohman, Charles; Williams, Heather; Antoniou, Fanouria; Calatroni, Sergio; Gasior, Marek; Jones, Owain Rhodri; Papaphilippou, Yannis; Pfingstner, Juergen; Rumolo, Giovanni; Schmickler, Hermann; Taborelli, Mauro; Asner, David; Boon, Laura; Garfinkel, Arthur; Byrd, John; Celata, Christine; Corlett, John; De Santis, Stefano; Furman, Miguel; Jackson, Alan; Kraft, Rick; Munson, Dawn; Penn, Gregory; Plate, David; Venturini, Marco; Carlson, Benjamin; Demma, Theo; Dowd, Rohan; Flanagan, John; Jain, Puneet; Kanazawa, Ken-ichi; Kubo, Kiyoshi; Ohmi, Kazuhito; Sakai, Hiroshi; Shibata, Kyo; Suetsugu, Yusuke; Tobiyama, Makoto; Gonnella, Daniel; Guo, Weiming; Harkay, Katherine; Holtzapple, Robert; Jones, James; Wolski, Andrzej; Kharakh, David; Ng, Johnny; Pivi, Mauro; Wang, Lanfa; Ross, Marc; Tan, Cheng-Yang; Zwaska, Robert; Schachter, Levi; Wilkinson, Eric

    2010-01-01

    The Cornell Electron Storage Ring (CESR) has been reconfigured as a test accelerator (CesrTA) for a program of electron cloud (EC) research at ultra low emittance. The instrumentation in the ring has been upgraded with local diagnostics for measurement of cloud density and with improved beam diagnostics for the characterization of both the low emittance performance and the beam dynamics of high intensity bunch trains interacting with the cloud. A range of EC mitigation methods have been deployed and tested and their effectiveness is discussed. Measurements of the electron cloud’s effect on the beam under a range of conditions are discussed along with the simulations being used to quantitatively understand these results

  4. Electron Cloud at Low Emittance in CesrTA

    Energy Technology Data Exchange (ETDEWEB)

    Palmer, Mark; /Cornell U., CLASSE; Alexander, James; /Cornell U., CLASSE; Billing, Michael; /Cornell U., CLASSE; Calvey, Joseph; /Cornell U., CLASSE; Conolly, Christopher; /Cornell U., CLASSE; Crittenden, James; /Cornell U., CLASSE; Dobbins, John; /Cornell U., CLASSE; Dugan, Gerald; /Cornell U., CLASSE; Eggert, Nicholas; /Cornell U., CLASSE; Fontes, Ernest; /Cornell U., CLASSE; Forster, Michael; /Cornell U., CLASSE; Gallagher, Richard; /Cornell U., CLASSE; Gray, Steven; /Cornell U., CLASSE; Greenwald, Shlomo; /Cornell U., CLASSE; Hartill, Donald; /Cornell U., CLASSE; Hopkins, Walter; /Cornell U., CLASSE; Kreinick, David; /Cornell U., CLASSE; Kreis, Benjamin; /Cornell U., CLASSE; Leong, Zhidong; /Cornell U., CLASSE; Li, Yulin; /Cornell U., CLASSE; Liu, Xianghong; /Cornell U., CLASSE /Cornell U., CLASSE /Cornell U., CLASSE /Cornell U., CLASSE /Cornell U., CLASSE /Cornell U., CLASSE /Cornell U., CLASSE /Cornell U., CLASSE /Cornell U., CLASSE /Cornell U., CLASSE /Cornell U., CLASSE /Cornell U., CLASSE /Cornell U., CLASSE /Cornell U., CLASSE /Cornell U., CLASSE /Cornell U., CLASSE /Cornell U., CLASSE /Cornell U., CLASSE /Cornell U., CLASSE /Cornell U., CLASSE /Cornell U., CLASSE /Cornell U., CLASSE /Cornell U., CLASSE /Cornell U., CLASSE /Cornell U., CLASSE /Cornell U., CLASSE /CERN /CERN /CERN /CERN /CERN /CERN; /more authors..

    2012-07-06

    The Cornell Electron Storage Ring (CESR) has been reconfigured as a test accelerator (CesrTA) for a program of electron cloud (EC) research at ultra low emittance. The instrumentation in the ring has been upgraded with local diagnostics for measurement of cloud density and with improved beam diagnostics for the characterization of both the low emittance performance and the beam dynamics of high intensity bunch trains interacting with the cloud. A range of EC mitigation methods have been deployed and tested and their effectiveness is discussed. Measurements of the electron cloud's effect on the beam under a range of conditions are discussed along with the simulations being used to quantitatively understand these results.

  5. Electron Cloud at Low Emittance in CesrTA

    Energy Technology Data Exchange (ETDEWEB)

    Alexander, J. P.; Billing, M. G.; Calvey, J.; Crittenden, J. A.; Dugan, G.; Eggert, N.; Forster, M.; Greenwald, S.; Hartill, D. L.; Hopkins, W. H.; Kreinick, D. L.; Li, Y.; Liu, X.; Livezey, J. A.; Meller, R.; Peck, S.; Peterson, D. P.; Rice, D.; Rider, N.; Rubin, D.; Sagan, D.; Schwartz, R.; Shanks, J. P.; Sikora, J.; Harkay, K. C.; Antoniou, F.; Calatroni, S.; Gasior, M.; Papaphilippou, Y.; Pfingstner, J.; Rumolo, G.; Schmickler, H.; Taborelli, M.; Holtzapple, R.; Jones, J.; Wolski, A.; Tan, C.Y.; Zwaska, R. M; Flanagan, J. W.; Kanazawa, K.I.; Sakai, H.; Shibata, K.; Suetsugu, Y.; Byrd, J.; Corlett, J.; De Santis, S.; Furman, M.; Kraft, R.; Munson, D. V.; Penn, G.; Plate, D.; Venturini, M.; Pivi, M. T. F.; Wang, L.; Schachter, L.

    2010-05-23

    The Cornell Electron Storage Ring (CESR) has been reconfigured as a test accelerator (CesrTA) for a program of electron cloud (EC) research at ultra low emittance. The instrumentation in the ring has been upgraded with local diagnostics for measurement of cloud density and with improved beam diagnostics for the characterization of both the low emittance performance and the beam dynamics of high intensity bunch trains interacting with the cloud. A range of EC mitigation methods have been deployed and tested and their effectiveness is discussed. Measurements of the electron cloud's effect on the beam under a range of conditions are discussed along with the simulations being used to quantitatively understand these results.

  6. Theory of Carbon Nanotube (CNT-Based Electron Field Emitters

    Directory of Open Access Journals (Sweden)

    Alexander V. Eletskii

    2013-07-01

    Full Text Available Theoretical problems arising in connection with development and operation of electron field emitters on the basis of carbon nanotubes are reviewed. The physical aspects of electron field emission that underlie the unique emission properties of carbon nanotubes (CNTs are considered. Physical effects and phenomena affecting the emission characteristics of CNT cathodes are analyzed. Effects given particular attention include: the electric field amplification near a CNT tip with taking into account the shape of the tip, the deviation from the vertical orientation of nanotubes and electrical field-induced alignment of those; electric field screening by neighboring nanotubes; statistical spread of the parameters of the individual CNTs comprising the cathode; the thermal effects resulting in degradation of nanotubes during emission. Simultaneous consideration of the above-listed effects permitted the development of the optimization procedure for CNT array in terms of the maximum reachable emission current density. In accordance with this procedure, the optimum inter-tube distance in the array depends on the region of the external voltage applied. The phenomenon of self-misalignment of nanotubes in an array has been predicted and analyzed in terms of the recent experiments performed. A mechanism of degradation of CNT-based electron field emitters has been analyzed consisting of the bombardment of the emitters by ions formed as a result of electron impact ionization of the residual gas molecules.

  7. Theory of Carbon Nanotube (CNT)-Based Electron Field Emitters.

    Science.gov (United States)

    Bocharov, Grigory S; Eletskii, Alexander V

    2013-07-17

    Theoretical problems arising in connection with development and operation of electron field emitters on the basis of carbon nanotubes are reviewed. The physical aspects of electron field emission that underlie the unique emission properties of carbon nanotubes (CNTs) are considered. Physical effects and phenomena affecting the emission characteristics of CNT cathodes are analyzed. Effects given particular attention include: the electric field amplification near a CNT tip with taking into account the shape of the tip, the deviation from the vertical orientation of nanotubes and electrical field-induced alignment of those; electric field screening by neighboring nanotubes; statistical spread of the parameters of the individual CNTs comprising the cathode; the thermal effects resulting in degradation of nanotubes during emission. Simultaneous consideration of the above-listed effects permitted the development of the optimization procedure for CNT array in terms of the maximum reachable emission current density. In accordance with this procedure, the optimum inter-tube distance in the array depends on the region of the external voltage applied. The phenomenon of self-misalignment of nanotubes in an array has been predicted and analyzed in terms of the recent experiments performed. A mechanism of degradation of CNT-based electron field emitters has been analyzed consisting of the bombardment of the emitters by ions formed as a result of electron impact ionization of the residual gas molecules.

  8. Theory of Carbon Nanotube (CNT)-Based Electron Field Emitters

    Science.gov (United States)

    Bocharov, Grigory S.; Eletskii, Alexander V.

    2013-01-01

    Theoretical problems arising in connection with development and operation of electron field emitters on the basis of carbon nanotubes are reviewed. The physical aspects of electron field emission that underlie the unique emission properties of carbon nanotubes (CNTs) are considered. Physical effects and phenomena affecting the emission characteristics of CNT cathodes are analyzed. Effects given particular attention include: the electric field amplification near a CNT tip with taking into account the shape of the tip, the deviation from the vertical orientation of nanotubes and electrical field-induced alignment of those; electric field screening by neighboring nanotubes; statistical spread of the parameters of the individual CNTs comprising the cathode; the thermal effects resulting in degradation of nanotubes during emission. Simultaneous consideration of the above-listed effects permitted the development of the optimization procedure for CNT array in terms of the maximum reachable emission current density. In accordance with this procedure, the optimum inter-tube distance in the array depends on the region of the external voltage applied. The phenomenon of self-misalignment of nanotubes in an array has been predicted and analyzed in terms of the recent experiments performed. A mechanism of degradation of CNT-based electron field emitters has been analyzed consisting of the bombardment of the emitters by ions formed as a result of electron impact ionization of the residual gas molecules. PMID:28348342

  9. High efficiency thermal to electric energy conversion using selective emitters and spectrally tuned solar cells

    Science.gov (United States)

    Chubb, Donald L.; Flood, Dennis J.; Lowe, Roland A.

    1992-01-01

    Thermophotovoltaic (TPV) systems are attractive possibilities for direct thermal-to-electric energy conversion, but have typically required the use of black body radiators operating at high temperatures. Recent advances in both the understanding and performance of solid rare-earth oxide selective emitters make possible the use of TPV at temperatures as low as 1500 K. Depending on the nature of parasitic losses, overall thermal-to-electric conversion efficiencies greater than 20 percent are feasible.

  10. Low Emittance Guns for the ILC Polarized Electron Beam

    Science.gov (United States)

    Clendenin, J. E.; Brachmann, A.; Ioakeimidi, K.; Kirby, R. E.; Maruyama, T.; Miller, R. H.; Wang, J. W.; Zhou, F.

    2007-06-01

    Polarized electron beams generated by DC guns are routinely available at several accelerators including JLAB, Mainz and SLAC. These guns operate with a cathode bias on the order of -100 kV. To minimize space charge effects, relatively long bunches are generated at the gun and then compressed longitudinally external to the gun just before and during initial acceleration. For linear colliders, this compression is accomplished using a combination of rf bunchers. For the basic design of the International Linear Collider (ILC), a 120 kV DC photocathode gun is used to produce a series of nanosecond bunches that are each compressed by two sub-harmonic bunchers (SHBs) followed by an L-band buncher and capture section. The longitudinal bunching process results in a significantly higher emittance than produced by the gun alone. While high-energy experiments using polarized beams are not generally sensitive to the source emittance, there are several benefits to a lower source emittance including a simpler more efficient injector system and a lower radiation load during transport especially at bends as at the damping ring. For the ILC, the SHBs could be eliminated if the voltage of the gun is raised sufficiently. Simulations using the General Particle Tracer (GPT) package indicate that a cathode bias voltage of ⩾200 kV should allow both SHBs to be operated at 433 or even 650 MHz, while ⩾500 kV would be required to eliminate the SHBs altogether. Simulations can be used to determine the minimum emittance possible if the injector is designed for a given increased voltage. A possible alternative to the DC gun is an rf gun. Emittance compensation, routinely used with rf guns, is discussed for higher-voltage DC guns.

  11. Efficient mode conversion in an optical nanoantenna mediated by quantum emitters

    CERN Document Server

    Straubel, Jakob; Rockstuhl, Carsten; Slowik, Karolina

    2016-01-01

    Converting signals between different electromagnetic modes is an asset for future information technologies. In general, slightly asymmetric optical nanoantennas enable the coupling between bright and dark modes sustained by an optical nanoantenna. However, the conversion efficiency might be very low. Here, we show that the additional incorporation of a quantum emitter allows to tremendously enhance this efficiency. The enhanced local density of states cycles the quantum emitter between its upper and lower level at an extremely hight rate; hence converting the energy very efficient. The process is robust with respect to possible experimental tolerances and adds a new ingredient to be exploited while studying and applying coupling phenomena in optical nanosystems.

  12. Shaping the electron beams with submicrosecond pulse duration in sources and electron accelerators with plasma emitters

    CERN Document Server

    Gushenets, V I

    2001-01-01

    One studies the techniques in use to shape submicrosecond electron beams and the physical processes associated with extraction of electrons from plasma in plasma emitters. Plasma emitter base sources and accelerators enable to generate pulse beams with currents varying from tens of amperes up to 10 sup 3 A, with current densities up to several amperes per a square centimeter, with pulse duration constituting hundreds of nanoseconds and with high frequencies of repetition

  13. Energy dynamics of solar thermionic power conversion with emitter of graphene

    Science.gov (United States)

    Olawole, Olukunle C.; De, Dilip K.; Oyedepo, Sunday O.

    2016-09-01

    In this paper we considered in details of the energy exchanges that would take place when concentrated solar energy is focused normally onto a thermionic emitter of area equal to the area of focus with solar energy being incident parallel to the axis of the parabolic mirror. We then, using a simplified version of the equations, compute the power output from the thermionic energy converter with emitters of graphene on silicon carbide, assuming that with the advent of new work function engineering technology the work function of graphene can be modulated from 4.5 eV to 1.5 eV and also with pure monolayer graphene for which a new thermionic emission equation has been discovered by the authors. Our theoretical research shows that graphene being a high temperature material, it is quite possible to practically realize a solar thermionic energy converter with good conversion efficiency using a graphene-on-silicon carbide emitter.

  14. Emittance growth induced by electron cloud in proton storage rings

    CERN Document Server

    Benedetto, Elena; Coppa, G

    2006-01-01

    In proton and positron storage rings with many closely spaced bunches, a large number of electrons can accumulate in the beam pipe due to various mechanisms (photoemission, residual gas ionization, beam-induced multipacting). The so-formed electron cloud interacts with the positively charged bunches, giving rise to instabilities, emittance growth and losses. This phenomenon has been observed in several existing machines such as the CERN Super Proton Synchrotron (SPS), whose operation has been constrained by the electron-cloud problem, and it is a concern for the Large Hadron Collider (LHC), under construction at CERN. The interaction between the beam and the electron cloud has features which cannot be fully taken into account by the conventional and known theories from accelerators and plasma physics. Computer simulations are indispensable for a proper prediction and understanding of the instability dynamics. The main feature which renders the beam-cloud interactions so peculiar is that the the electron cloud...

  15. Field Emitter Arrays for a Free Electron Laser Application

    CERN Document Server

    Shing-Bruce-Li, Kevin; Ganter, Romain; Gobrecht, Jens; Raguin, Jean Yves; Rivkin, Leonid; Wrulich, Albin F

    2004-01-01

    The development of a new electron gun with the lowest possible emittance would help reducing the total length and cost of a free electron laser. Field emitter arrays (FEAs) are an attractive technology for electron sources of ultra high brightness. Indeed, several thousands of microscopic tips can be deposited on a 1 mm diameter area. Electrons are then extracted by applying voltage to a first grid layer close to the tip apexes, the so called gate layer, and focused by a second grid layer one micrometer above the tips. The typical aperture diameter of the gate and the focusing layer is in the range of one micrometer. One challenge for such cathodes is to produce peak currents in the ampere range since the usual applications of FEAs require less than milliampere. Encouraging peak current performances have been obtained by applying voltage pulses at low frequency between gate and tips. In this paper we report on different tip materials available on the market: diamond FEAs from Extreme Devices Inc., ZrC single ...

  16. Emittance Measurements from a Laser Driven Electron Injector

    CERN Document Server

    Reis, D

    2003-01-01

    The Gun Test Facility (GTF) at the Stanford Linear Accelerator Center was constructed to develop an appropriate electron beam suitable for driving a short wavelength free electron laser (FEL) such as the proposed Linac Coherent Light Source (LCLS). For operation at a wavelength of 1.5 (angstrom), the LCLS requires an electron injector that can produce an electron beam with approximately 1 pi mm-mrad normalized rms emittance with at least 1 nC of charge in a 10 ps or shorter bunch. The GTF consists of a photocathode rf gun, emittance-compensation solenoid, 3 m linear accelerator (linac), drive laser, and diagnostics to measure the beam. The rf gun is a symmetrized 1.6 cell, s-band high gradient, room temperature, photocathode structure. Simulations show that this gun when driven by a temporally and spatially shaped drive laser, appropriately focused with the solenoid, and further accelerated in linac can produce a beam that meets the LCLS requirements. This thesis describes the initial characterization of the ...

  17. Development of maskless electron-beam lithography using nc-Si electron-emitter array

    Science.gov (United States)

    Kojima, A.; Ikegami, N.; Yoshida, T.; Miyaguchi, H.; Muroyama, M.; Nishino, H.; Yoshida, S.; Sugata, M.; Cakir, S.; Ohyi, H.; Koshida, N.; Esashi, M.

    2013-03-01

    This study demonstrated our prototyped Micro Electro Mechanical System (MEMS) electron emitter which is a nc-Si (nanocrystalline silicon) ballistic electron emitter array integrated with an active-matrix driving LSI for high-speed Massively Parallel Electron Beam Direct Writing (MPEBDW) system. The MPEBDW system consists of the multi-column, and each column provides multi-beam. Each column consists of emitter array, a MEMS condenser lens array, an MEMS anode array, a stigmator, three-stage deflectors to align and to scan the multi beams, and a reduction lens as an objective lens. The emitter array generates 100x100 electron beams with binary patterns. The pattern exposed on a target is stored in one of the duplicate memories in the active matrix LSI. After the emission, each electron beam is condensed into narrow beam in parallel to the axis of electron optics of the system with the condenser lens array. The electrons of the beams are accelerated and pass through the anode array. The stigmator and deflectors make fine adjustments to the position of the beams. The reduction lens in the final stage focuses all parallel beams on the surface of the target wafer. The lens reduces the electron image to 1%-10% in size. Electron source in this system is nc-Si ballistic surface electron emitter. The characteristics of the emitter of 1:1 projection of e-beam have been demonstrated in our previous work. We developed a Crestec Surface Electron emission Lithography (CSEL) for mass production of semiconductor devices. CSEL system is 1:1 electron projection lithography using surface electron emitter. In first report, we confirmed that a test bench of CSEL resolved below 30 nm pattern over 0.2 um square area. Practical resolution of the system is limited by the chromatic aberration. We also demonstrated the CSEL system exposed deep sub-micron pattern over full-field for practical use. As an interim report of our development of MPEBDW system, we evaluated characteristics of the

  18. Predicted emittance and brightness of the pseudospark electron-beam

    Energy Technology Data Exchange (ETDEWEB)

    Pitchford, L.C. [Univ. Paul Sabatier, Toulouse (France). Centre de Physique Atomique

    1995-06-01

    The emittance /and brightness of the electron beam generated during the hollow cathode phase of pseudospark operation are calculated using the two-dimensional hybrid fluid-particle model previously developed to study the time and space development of the plasma in a pseudospark discharge. Two distinct energy components exist in the electron beam; a high-energy component with an energy equivalent to the full discharge voltage and another, broad, low-energy component. In the 100 ns following breakdown and for the conditions of the calculations, the emittance of the high energy component decreases by an order of magnitude and the brightness of the high energy component reaches almost 10{sup 10} A/m{sup 2} rad{sub 2}. This work demonstrates the feasibility of using the model to guide the optimization of the pseudospark electron beam properties and shows that the optimum beam properties are achieved after the plasma has filled the hollow cathode and begun to expand radially in the main gap.

  19. Thermo-electronic solar power conversion with a parabolic concentrator

    Science.gov (United States)

    Olukunle, Olawole C.; De, Dilip K.

    2016-02-01

    We consider the energy dynamics of the power generation from the sun when the solar energy is concentrated on to the emitter of a thermo-electronic converter with the help of a parabolic mirror. We use the modified Richardson-Dushman equation. The emitter cross section is assumed to be exactly equal to the focused area at a height h from the base of the mirror to prevent loss of efficiency. We report the variation of output power with solar insolation, height h, reflectivity of the mirror, and anode temperature, initially assuming that there is no space charge effect. Our methodology allows us to predict the temperature at which the anode must be cooled in order to prevent loss of efficiency of power conversion. Novel ways of tackling the space charge problem have been discussed. The space charge effect is modeled through the introduction of a parameter f (0 solar insolation, height h, apart from radii R of the concentrator aperture and emitter, and the collector material properties. We have also considered solar thermos electronic power conversion by using single atom-layer graphene as an emitter.

  20. ROLE OF DIAMOND SECONDARY EMITTERS IN HIGH BRIGHTNESS ELECTRON SOURCES.

    Energy Technology Data Exchange (ETDEWEB)

    RAO, T.; BEN-ZVI, I.; BURRILL, A.; CHANG, X.; GRIMES, J.; RANK, J.; SEGALOV, Z.; SMEDLEY, J.

    2005-09-20

    In this paper we explore the possibility of using diamond secondary emitter in a high average current electron injector to amplify the current from the photocathode and to isolate the cathode and the injector from each other to increase the life time of the cathode and preserve the performance of the injector. Secondary electron yield of 225 and current density of 0.8 a/cm{sup 2} have been measured in the transmission mode from type 2 a natural diamond. Although the diamond will be heated during normal operation in the injector, calculations indicate that by cryogenically cooling the diamond, the temperature gradient along the diamond can be maintained within the acceptable range. The electron energy and temporal distributions are expected to be narrow from this device resulting in high brightness beams. Plans are underway to measure the SEY in emission mode, fabricate photocathode-diamond capsule and test diamond and capsule in superconducting RF injector.

  1. Low-energy, high-current, ion source with cold electron emitter

    Energy Technology Data Exchange (ETDEWEB)

    Vizir, A. V.; Oks, E. M. [High Current Electronics Institute, Russian Academy of Sciences, Tomsk 634055 (Russian Federation); State University of Control Systems and Radioelectronics, Tomsk 634050 (Russian Federation); Shandrikov, M. V.; Yushkov, G. Yu. [High Current Electronics Institute, Russian Academy of Sciences, Tomsk 634055 (Russian Federation)

    2012-02-15

    An ion source based on a two-stage discharge with electron injection from a cold emitter is presented. The first stage is the emitter itself, and the second stage provides acceleration of injected electrons for gas ionization and formation of ion flow (<20 eV, 5 A dc). The ion accelerating system is gridless; acceleration is accomplished by an electric field in the discharge plasma within an axially symmetric, diverging, magnetic field. The hollow cathode electron emitter utilizes an arc discharge with cathode spots hidden inside the cathode cavity. Selection of the appropriate emitter material provides a very low erosion rate and long lifetime.

  2. Electron Emitter for small-size Electrodynamic Space Tether using MEMS Technology

    DEFF Research Database (Denmark)

    Fleron, René A. W.; Blanke, Mogens

    2004-01-01

    system with focus on electron emitter design and manufacture using micro-electro-mechanical- system (MEMS) technology. The paper addresses the system concepts of a small size electrodynamic tether mission and shows a novel electron emitter for the 1-2 mA range where altitude can be effectively affected...

  3. Tunable graphene micro-emitters with fast temporal response and controllable electron emission.

    Science.gov (United States)

    Wu, Gongtao; Wei, Xianlong; Gao, Song; Chen, Qing; Peng, Lianmao

    2016-05-10

    Microfabricated electron emitters have been studied for half a century for their promising applications in vacuum electronics. However, tunable microfabricated electron emitters with fast temporal response and controllable electron emission still proves challenging. Here, we report the scaling down of thermionic emitters to the microscale using microfabrication technologies and a Joule-heated microscale graphene film as the filament. The emission current of the graphene micro-emitters exhibits a tunability of up to six orders by a modest gate voltage. A turn-on/off time of less than 1 μs is demonstrated for the graphene micro-emitters, indicating a switching speed about five orders of magnitude faster than their bulky counterparts. Importantly, emission performances of graphene micro-emitters are controllable and reproducible through engineering graphene dimensions by microfabrication technologies, which enables us to fabricate graphene micro-emitter arrays with uniform emission performances. Graphene micro-emitters offer an opportunity of realizing large-scale addressable micro-emitter arrays for vacuum electronics applications.

  4. Electron emission from MOS electron emitters with clean and cesium covered gold surface

    DEFF Research Database (Denmark)

    Nielsen, Gunver; Thomsen, Lasse Bjørchmar; Johansson, Martin;

    2009-01-01

    MOS (metal-oxide-semiconductor) electron emitters consisting of a Si substrate, a SiO2 tunnel barrier and a Ti (1 nm)/Au(7 nm) top-electrode, with an active area of 1 cm(2) have been produced and studied with surface science techniques under UHV (ultra high vacuum) conditions and their emission c...

  5. Generation of low-emittance electron beams in electrostatic accelerators for FEL applications

    Science.gov (United States)

    Teng, Chen; Elias, Luis R.

    1995-02-01

    This paper reports results of transverse emittance studies and beam propagation in electrostatic accelerators for free electron laser applications. In particular, we discuss emittance growth analysis of a low current electron beam system consisting of a miniature thermoionic electron gun and a National Electrostatics Accelerator (NEC) tube. The emittance growth phenomenon is discussed in terms of thermal effects in the electron gun cathode and aberrations produced by field gradient changes occurring inside the electron gun and throughout the accelerator tube. A method of reducing aberrations using a magnetic solenoidal field is described. Analysis of electron beam emittance was done with the EGUN code. Beam propagation along the accelerator tube was studied using a cylindrically symmetric beam envelope equation that included beam self-fields and the external accelerator fields which were derived from POISSON simulations.

  6. High efficiency direct thermal to electric energy conversion from radioisotope decay using selective emitters and spectrally tuned solar cells

    Science.gov (United States)

    Chubb, Donald L.; Flood, Dennis J.; Lowe, Roland A.

    1993-01-01

    Thermophotovoltaic (TPV) systems are attractive possibilities for direct thermal-to-electric energy conversion, but have typically required the use of black body radiators operating at high temperatures. Recent advances in both the understanding and performance of solid rare-earth oxide selective emitters make possible the use of TPV at temperatures as low as 1200K. Both selective emitter and filter system TPV systems are feasible. However, requirements on the filter system are severe in order to attain high efficiency. A thin-film of a rare-earth oxide is one method for producing an efficient, rugged selective emitter. An efficiency of 0.14 and power density of 9.2 W/KG at 1200K is calculated for a hypothetical thin-film neodymia (Nd2O3) selective emitter TPV system that uses radioisotope decay as the thermal energy source.

  7. Carbon Nanotube Electron Emitter for X-ray Imaging

    Directory of Open Access Journals (Sweden)

    Jung Su Kang

    2012-11-01

    Full Text Available The carbon nanotube field emitter array was grown on silicon substrate through a resist-assisted patterning (RAP process. The shape of the carbon nanotube array is elliptical with 2.0 × 0.5 mm2 for an isotropic focal spot size at anode target. The field emission properties with triode electrodes show a gate turn-on field of 3 V/µm at an anode emission current of 0.1 mA. The author demonstrated the X-ray source with triode electrode structure utilizing the carbon nanotube emitter, and the transmitted X-ray image was of high resolution.

  8. Characterizing and Optimizing Photocathode Laser Distributions for Ultra-low Emittance Electron Beam Operations

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, F. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Bohler, D. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Ding, Y. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Gilevich, S. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Huang, Z. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Loos, H. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Ratner, D. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Vetter, S. [SLAC National Accelerator Lab., Menlo Park, CA (United States)

    2015-12-07

    Photocathode RF gun has been widely used for generation of high-brightness electron beams for many different applications. We found that the drive laser distributions in such RF guns play important roles in minimizing the electron beam emittance. Characterizing the laser distributions with measurable parameters and optimizing beam emittance versus the laser distribution parameters in both spatial and temporal directions are highly desired for high-brightness electron beam operation. In this paper, we report systematic measurements and simulations of emittance dependence on the measurable parameters represented for spatial and temporal laser distributions at the photocathode RF gun systems of Linac Coherent Light Source. The tolerable parameter ranges for photocathode drive laser distributions in both directions are presented for ultra-low emittance beam operations.

  9. Effects of base resistor on electron emission from a field emitter

    Energy Technology Data Exchange (ETDEWEB)

    Luginsland, J.W.; Valfells, A.; Lau, Y.Y. [Univ. of Michigan, Ann Arbor, MI (United States)

    1996-12-31

    Field emitters have remained an important, high brightness electron source for display and for generation of coherent radiation. The rapid rise in the emitter current with voltage in these emitters leads to serious implications on the emitter stability (thermal, mechanical, and electrical), and an obvious way to improve the emitter stability is to add a series resistor to the emitters. However, the addition of a series resistor would result in a higher operating voltage, loss in efficiency, and much higher cost. In this paper, the authors use a simple model to provide a quantitative analysis of the effects of a base resistor on the voltage-current (V-I) characteristics of a single field emitter. Two features of the present work are noteworthy. First, they present a set of universal curves, from which the effects of a series resistor can immediately be determined once the Fowler-Nordheim coefficients A, B, and the gap spacing D are specified. Thus, these curves are applicable to a large class of field emitters. Second, the calculations take into account the effects of space charge that is present in the gap. The relative importance of the space charge and of the series resistor will become apparent from these curves. Examples will be given.

  10. Single shot 3 GeV electron transverse emittance with a pepper-pot

    Science.gov (United States)

    Thomas, Cyrille; Delerue, Nicolas; Bartolini, Riccardo

    2013-11-01

    We present the first measurement of the transverse emittance of an electron bunch at 3 GeV using the pepper-pot technique. The measurements presented in this paper demonstrate the possibility to use such a method for single shot emittance measurement of high energy particles. This measurement presents also the experimental verification of a previous theoretical study, which was predicting in which condition such a measurement can be done. The method may present some technical limitations which are discussed in view of the application to future very small emittance multi-GeV particle accelerators.

  11. Emittance studies at the Los Alamos National Laboratory Free-Electron Laser (FEL)

    Science.gov (United States)

    Carlsten, B. E.; Feldman, D. W.; Lumpkin, A. H.; Stein, W. E.; Warren, R. W.

    Recent emittance studies at the Los Alamos Free-Electron Laser (FEL) have indicated several areas of concern in the linac and beamline feeding the wiggler. Four emittance growth mechanisms of special importance have been studied. First, a rapid growth of the electron beam's emittance immediately after the spherical gridded Pierce gun resulted, in part, from the long time required for our pulsing electronics to ramp the grid voltage up at the start and down at the end of the pulse, which created a pulse with a cosine-like current distribution as a function of time. The growth was compounded by the extremely small radial beam size (almost a waist) leaving the gun. In addition, we saw evidence of electrostatic charging of the insulators in the gun, reducing the quality of the electron beam further. Second, the action of the solenoidal focusing fields in the low-voltage bunching region was studied, and criteria for a minimum emittance growth were established. Third, maximum misalignment angles and displacements for various elements of the beamline were calculated for the desired low emittance growth. Finally, emittance growth in the horizontal dimension through the nonisochronous bend caused by varying energy depression on the particles due to longitudinal wake fields was both calculated and observed. In addition, we measured energy depressions caused by the wake fields generated by various other elements in the beamline. Strategies were developed to relieve the magnitude of these wake-field effects.

  12. Multislit-Based Emittance Measurement of Electron Beam from a Photocathode Radio-Frequency Gun

    Institute of Scientific and Technical Information of China (English)

    YAN Li-Xin; DU Ying-Chao; XIANG Dao; LI Ren-Kai; QIAN Hou-Jun; HUANG Wen-Hui; TANG Chuan-Xiang; LIN Yu-Zheng; CHENG Jian-Ping

    2008-01-01

    Measurement of emittance for a space-charge dominated electron beam from a photocathode rf gun is performed by employing the multislit-based method at Accelerator Laboratory of Tsinghua University.We present the design considerations on the multislit system and the experimental results,with special attention to the study of space charge induced emittance growth.The experimental results are in reasonable agreement with the PARMELA simulations.

  13. Simulation of electron beam formation and transport in a gas-filled electron-optical system with a plasma emitter

    Science.gov (United States)

    Grishkov, A. A.; Kornilov, S. Yu.; Rempe, N. G.; Shidlovskiy, S. V.; Shklyaev, V. A.

    2016-07-01

    The results of computer simulations of the electron-optical system of an electron gun with a plasma emitter are presented. The simulations are performed using the KOBRA3-INP, XOOPIC, and ANSYS codes. The results describe the electron beam formation and transport. The electron trajectories are analyzed. The mechanisms of gas influence on the energy inhomogeneity of the beam and its current in the regions of beam primary formation, acceleration, and transport are described. Recommendations for optimizing the electron-optical system with a plasma emitter are presented.

  14. Simulation of electron beam formation and transport in a gas-filled electron-optical system with a plasma emitter

    Energy Technology Data Exchange (ETDEWEB)

    Grishkov, A. A. [Russian Academy of Sciences, Institute of High Current Electronics, Siberian Branch (Russian Federation); Kornilov, S. Yu., E-mail: kornilovsy@gmail.com; Rempe, N. G. [Tomsk State University of Control Systems and Radioelectronics (Russian Federation); Shidlovskiy, S. V. [Tomsk State University (Russian Federation); Shklyaev, V. A. [Russian Academy of Sciences, Institute of High Current Electronics, Siberian Branch (Russian Federation)

    2016-07-15

    The results of computer simulations of the electron-optical system of an electron gun with a plasma emitter are presented. The simulations are performed using the KOBRA3-INP, XOOPIC, and ANSYS codes. The results describe the electron beam formation and transport. The electron trajectories are analyzed. The mechanisms of gas influence on the energy inhomogeneity of the beam and its current in the regions of beam primary formation, acceleration, and transport are described. Recommendations for optimizing the electron-optical system with a plasma emitter are presented.

  15. In-trap conversion electron spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Weissman, L. E-mail: weissman@nscl.msu.edu; Ames, F.; Aeysto, J.; Forstner, O.; Reisinger, K.; Rinta-Antila, S

    2002-10-21

    The Penning trap REXTRAP at ISOLDE was used to test the feasibility of in-trap conversion electron spectroscopy. The results of simulations, experiments with solid conversion electron sources as well as first on-line tests with trapped radioactive ions are presented. In addition to obtaining high-resolution spectroscopic data, the detection of conversion electrons was found to be a useful tool for the diagnostics of the trap operation. The tests proved the feasibility of in-trap spectroscopy but also revealed some potential problems to be addressed in the future.

  16. In-trap conversion electron spectroscopy

    CERN Document Server

    Weissman, L; Äystö, J; Forstner, O; Reisinger, K; Rinta-Antila, S

    2002-01-01

    The Penning trap REXTRAP at ISOLDE was used to test the feasibility of in-trap conversion electron spectroscopy. The results of simulations, experiments with solid conversion electron sources as well as first on-line and tests with trapped radioactive ions are presented. In addition to obtaining high-resolution spectroscopic data, the detection of conversion electrons was found to be a useful tool for the diagnostics of the trap operation. The tests proved the feasibility of in-trap spectroscopy but also revealed some potential problems to be addressed in the future.

  17. Monte Carlo calculation of dose rate conversion factors for external exposure to photon emitters in soil

    CERN Document Server

    Clouvas, A; Antonopoulos-Domis, M; Silva, J

    2000-01-01

    The dose rate conversion factors D/sub CF/ (absorbed dose rate in air per unit activity per unit of soil mass, nGy h/sup -1/ per Bq kg/sup -1/) are calculated 1 m above ground for photon emitters of natural radionuclides uniformly distributed in the soil. Three Monte Carlo codes are used: 1) The MCNP code of Los Alamos; 2) The GEANT code of CERN; and 3) a Monte Carlo code developed in the Nuclear Technology Laboratory of the Aristotle University of Thessaloniki. The accuracy of the Monte Carlo results is tested by the comparison of the unscattered flux obtained by the three Monte Carlo codes with an independent straightforward calculation. All codes and particularly the MCNP calculate accurately the absorbed dose rate in air due to the unscattered radiation. For the total radiation (unscattered plus scattered) the D/sub CF/ values calculated from the three codes are in very good agreement between them. The comparison between these results and the results deduced previously by other authors indicates a good ag...

  18. Carbon Nanotube Electron Emitter for X-ray Imaging

    OpenAIRE

    Jung Su Kang; Je Hwang Ryu; Kyu Chang Park

    2012-01-01

    The carbon nanotube field emitter array was grown on silicon substrate through a resist-assisted patterning (RAP) process. The shape of the carbon nanotube array is elliptical with 2.0 × 0.5 mm2 for an isotropic focal spot size at anode target. The field emission properties with triode electrodes show a gate turn-on field of 3 V/µm at an anode emission current of 0.1 mA. The author demonstrated the X-ray source with triode electrode structure utilizing the carbon nanotube em...

  19. Accurate model of electron beam profiles with emittance effects for pierce guns

    Science.gov (United States)

    Zeng, Peng; Wang, Guangqiang; Wang, Jianguo; Wang, Dongyang; Li, Shuang

    2016-09-01

    Accurate prediction of electron beam profile is one of the key objectives of electron optics, and the basis for design of the practical electron gun. In this paper, an improved model describing electron beam in Pierce gun with both space charge effects and emittance effects is proposed. The theory developed by Cutler and Hines is still applied for the accelerating region of the Pierce gun, while the motion equations of the electron beams in the anode aperture and drift tunnel are improved by modifying electron optics theory with emittance. As a result, a more universal and accurate formula of the focal length of the lens for the electron beam with both effects is derived for the anode aperture with finite dimension, and a modified universal spread curve considering beam emittance is introduced in drift tunnel region. Based on these improved motion equations of the electron beam, beam profiles with space charge effects and emittance effects can be theoretically predicted, which are subsequently approved to agree well with the experimentally measured ones. The developed model here is helpful to design more applicable Pierce guns at high frequencies.

  20. Low emittance electron beam formation with a 17 GHz RF gun

    Directory of Open Access Journals (Sweden)

    W. J. Brown

    2001-08-01

    Full Text Available We report on electron beam quality measurement results from the Massachusetts Institute of Technology 17 GHz RF gun experiment. The 1.5 cell RF gun uses a solenoid for emittance compensation. It has produced bunch charges up to 0.1 nC with beam energies up to 1 MeV. The normalized rms emittance of the beam after 35 cm of transport from the gun has been measured by a slit technique to be 3π mm mrad for a 50 pC bunch. This agrees well with PARMELA simulations at these beam energies. At the exit of the electron gun, we estimate the emittance to be about 1π mm mrad, which corresponds to a beam brightness of about 80 A/(π mm mrad^{2}. Improved beam quality should be possible with a higher energy output electron beam from the gun.

  1. Influence of the electron beam emittance on the polarization of a laser--electron X-ray generator

    CERN Document Server

    Artyukov, I A; Feshchenko, R M

    2016-01-01

    In this paper we analyze the polarization of the X-ray radiation coming from laser--electron X-ray generator (LEXG). We obtain general relations connecting the polarization state of outgoing X-ray radiation to the polarization state of laser beam as well as to the parameters of electron beam. We demonstrate that finite electron beam emittance causes a partial depolarization of initially fully polarized X-ray radiation even when the laser beam is fully polarized. We demonstrate with a number of numerical experiments that finite electron beam emittance can in some cases fundamentally alter the polarization state of X-ray radiation as compared to the polarization state of X-ray radiation scattered by electron beam with a zero emittance. Possible applications of polarized LEXG's radiation are discussed.

  2. Plasmons in doped finite carbon nanotubes and their interactions with fast electrons and quantum emitters

    Science.gov (United States)

    de Vega, Sandra; Cox, Joel D.; de Abajo, F. Javier García

    2016-08-01

    We study the potential of highly doped finite carbon nanotubes to serve as plasmonic elements that mediate the interaction between quantum emitters. Similar to graphene, nanotubes support intense plasmons that can be modulated by varying their level of electrical doping. These excitations exhibit large interaction with light and electron beams, as revealed upon examination of the corresponding light extinction cross-section and electron energy-loss spectra. We show that quantum emitters experience record-high Purcell factors, while they undergo strong mutual interaction mediated by their coupling to the tube plasmons. Our results show the potential of doped finite nanotubes as tunable plasmonic materials for quantum optics applications.

  3. Conversion of a transverse density modulation into a longitudinal phase space modulation using an emittance exchange technique

    CERN Document Server

    Sun, Y -E; Johnson, A; Lumpkin, A; Ruan, J; Thurman-Keup, R

    2010-01-01

    We report on an experiment to produce a train of sub-picosecond microbunches using a transverse-to-longitudinal emittance exchange technique. The generation of a modulation on the longitudinal phase space is done by converting an initial horizontal modulation produced using a multislits mask. The preliminary experimental data clearly demonstrate the conversion process. To date only the final energy modulation has been measured. However numerical simulations, in qualitative agreement with the measurements, indicate that the conversion process should also introduce a temporal modulation.

  4. Rare earth boride electron emitter materials fabrication and evaluation

    Science.gov (United States)

    Swanson, L. W.; Davis, P. R.; Gesley, M. A.

    1982-03-01

    Techniques were developed for routine preparation of single crystal rods of LaB6, CeB6 and PrB6 by arc float zone refining. Single crystal, oriented samples were prepared from these rods and mounted as cathodes for testing. Several mounting systems were used, and flat, pointed cone and truncated cone thermionic cathodes were studied. Pointed field emitters of LaB6(100) were also investigated. Variation of thermionic emitted current density and thermal stability of materials were studied as functions of rare earth element, bulk stoichiometry and crystal orientation. Life tests were performed on several different LaB6(100) cathodes. One such cathode operated for over 3000 hours at approximately 10 A/sq cm emitted current density with no serious physical degradation. Surface properties of the materials were investigated by various surface analysis techniques.

  5. Towards a Small Emittance Design of the JLEIC Electron Collider Ring

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Fanglei [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Derbenev, Yaroslav [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Hutton, Andrew M. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Morozov, Vasiliy [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Pilat, Fulvia C. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Zhang, Yuhong [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States)

    2016-05-01

    The electron collider ring of the Jefferson Lab Electron-Ion Collider (JLEIC) is designed to provide an electron beam with a small beam size at the IP for collisions with an ion beam in order to reach a desired high luminosity. For a chosen beta-star at the IP, electron beam size is determined by the equilibrium emittance that can be obtained through a linear optics design. This paper briefly describes the baseline design of the electron collider ring reusing PEP-II components and considering their parameters (such as dipole sagitta, magnet field strengths and acceptable synchrotron radiation power) and reports a few approaches to reducing the equilibrium emittance in the electron collider ring.

  6. Emittance studies at the Los Alamos national laboratory free electron laser

    Science.gov (United States)

    Carlsten, B. E.; Feldman, D. W.; Lumpkin, A. H.; Sollid, J. E.; Stein, W. E.; Warren, R. W.

    1988-10-01

    Recent emittance studies at the Los Alamos FEL have indicated several areas of concern in the linac and beamline feeding the wiggler. These studies included both experimental measurements and computer simulations. The beamline starts with a 5 A micropulse from the thermionic cathode in the gun. After bunching by velocity modulation and acceleration to 20 MeV in a 1300 MHz standing wave accelerator, the beam current is roughly 250 A. Final bunching to 800 A is performed in the nonisochronous bend that rotates the electrons onto the axis of the wiggler and the optical cavity. Four emittance growth mechanisms of special importance have been studied. First, a rapid growth of the electron beam's emittance immediately after the spherical gridded Pierce gun resulted, in part, from the long time required for our pulsing electronics to ramp the grid voltage up at the start and down at the end of the pulse, which created a pulse with a cosine-like current distribution as a function of time. The growth was compounded by the extremely small radial beam size (almost a waist) leaving the gun. In addition, we saw evidence of electrostatic charging of the insulators in the gun, reducing the quality of the electron beam further. Second the action of the solenoidal focusing fields in the low-voltage bunching region was studied, and criteria for a minimum emittance growth were established. Third, maximum misalignment angles and displacements for various elements of the beamline were calculated for the desired low emittance growth. Finally, emittance growth in the horizontal dimensions through the nonisochronous bend caused by varying energy depression on the particles due to longitudinal wake fields was both calculated and observed. In addition, we measured energy depressions caused by the wake fields generated by various other elements in the beamline. Strategies were developed to relieve the magnitude of these wake-field effects.

  7. Thermo electronic laser energy conversion

    Science.gov (United States)

    Hansen, L. K.; Rasor, N. S.

    1976-01-01

    The thermo electronic laser energy converter (TELEC) is described and compared to the Waymouth converter and the conventional thermionic converter. The electrical output characteristics and efficiency of TELEC operation are calculated for a variety of design variables. Calculations and results are briefly outlined. It is shown that the TELEC concept can potentially convert 25 to 50 percent of incident laser radiation into electric power at high power densities and high waste heat rejection temperatures.

  8. Test beam results of a low-pressure micro-strip gas chamber with a secondary-electron emitter

    Energy Technology Data Exchange (ETDEWEB)

    Kwan, S.; Anderson, D.F.; Zimmerman, J. [Fermi National Accelerator Lab., Batavia, IL (United States); Sbarra, C. [Istituto Nazionale di Fisica Nucleare, Pisa (Italy); Salomon, M. [TRIUMF, Vancouver, BC (Canada)

    1994-10-01

    We present recent results, from a beam test, on the angular dependence of the efficiency and the distribution of the signals on the anode strips of a low-pressure microstrip gas chamber with a thick CsI layer as a secondary-electron emitter. New results of CVD diamond films as secondary-electron emitters are discussed.

  9. Numerical analysis of the surface-conduction electron-emitter with a new configuration

    Science.gov (United States)

    Shen, Zhihua; Wang, Xiao; Wu, Shengli; Tian, Jinshou

    2016-04-01

    A new kind of surface-conduction electron-emitter (SCE) with a triangular dielectric layer under the conductive film is proposed. The influences of the vertex angle (𝜃) of the triangular dielectric layer and the anode voltage (Ua) on the electron emission efficiency and the focusing capability have been investigated with the finite integration technique (FIT). The numerical simulation results show that SCE with a small vertex angle guarantees higher electron emission efficiency even with a low anode voltage. But the focusing capability of the electron emitter will get worse when the 𝜃 or Ua becomes too small. Take both the electron emission efficiency and focusing capability into consideration, the structure with a vertex angle (𝜃) between 60∘-100∘ and the anode voltage of 1500V is suggested.

  10. Manipulating the Electronic Excited State Energies of Pyrimidine-Based Thermally Activated Delayed Fluorescence Emitters To Realize Efficient Deep-Blue Emission.

    Science.gov (United States)

    Komatsu, Ryutaro; Ohsawa, Tatsuya; Sasabe, Hisahiro; Nakao, Kohei; Hayasaka, Yuya; Kido, Junji

    2017-02-08

    The development of efficient and robust deep-blue emitters is one of the key issues in organic light-emitting devices (OLEDs) for environmentally friendly, large-area displays or general lighting. As a promising technology that realizes 100% conversion from electrons to photons, thermally activated delayed fluorescence (TADF) emitters have attracted considerable attention. However, only a handful of examples of deep-blue TADF emitters have been reported to date, and the emitters generally show large efficiency roll-off at practical luminance over several hundreds to thousands of cd m(-2), most likely because of the long delayed fluorescent lifetime (τd). To overcome this problem, we molecularly manipulated the electronic excited state energies of pyrimidine-based TADF emitters to realize deep-blue emission and reduced τd. We then systematically investigated the relationships among the chemical structure, properties, and device performances. The resultant novel pyrimidine emitters, called Ac-XMHPMs (X = 1, 2, and 3), contain different numbers of bulky methyl substituents at acceptor moieties, increasing the excited singlet (ES) and triplet state (ET) energies. Among them, Ac-3MHPM, with a high ET of 2.95 eV, exhibited a high external quantum efficiency (ηext,max) of 18% and an ηext of 10% at 100 cd m(-2) with Commission Internationale de l'Eclairage chromaticity coordinates of (0.16, 0.15). These efficiencies are among the highest values to date for deep-blue TADF OLEDs. Our molecular design strategy provides fundamental guidance to design novel deep-blue TADF emitters.

  11. Heralded quantum repeater based on the scattering of photons off single emitters using parametric down-conversion source.

    Science.gov (United States)

    Song, Guo-Zhu; Wu, Fang-Zhou; Zhang, Mei; Yang, Guo-Jian

    2016-06-28

    Quantum repeater is the key element in quantum communication and quantum information processing. Here, we investigate the possibility of achieving a heralded quantum repeater based on the scattering of photons off single emitters in one-dimensional waveguides. We design the compact quantum circuits for nonlocal entanglement generation, entanglement swapping, and entanglement purification, and discuss the feasibility of our protocols with current experimental technology. In our scheme, we use a parametric down-conversion source instead of ideal single-photon sources to realize the heralded quantum repeater. Moreover, our protocols can turn faulty events into the detection of photon polarization, and the fidelity can reach 100% in principle. Our scheme is attractive and scalable, since it can be realized with artificial solid-state quantum systems. With developed experimental technique on controlling emitter-waveguide systems, the repeater may be very useful in long-distance quantum communication.

  12. Surface-conduction electron-emitter characteristics and fabrication based on vertically aligned carbon nanotube arrays

    Science.gov (United States)

    Shih, Yi-Ting; Li, Kuan-Wei; Honda, Shin-ichi; Lin, Pao-Hung; Huang, Ying-Sheng; Lee, Kuei-Yi

    2017-06-01

    The carbon nanotube (CNT) has replaced palladium oxide (PdO) as the electrode material for surface-conduction electron-emitter (SCE) applications. Vertically aligned CNT arrays with a delta-star arrangement were patterned and synthesized onto a quartz substrate using photolithography and thermal chemical vapor deposition. Delta-star shaped VACNT arrays with 20° tips are used as cathodes that easily emit electrons because of their high electrical field gradient. In order to improve the field emission and secondary electrons (SEs) in SCE applications, magnesium oxide (MgO) nanostructures were coated onto the VACNT arrays to promote the surface-conduction electron-emitter display (SED) efficiency (η). According to the definition of η in SCE applications, in this study, the η was stably maintained in the 75-85% range. The proposed design provides a facile new method for developing SED applications.

  13. A first-order matrix approach to the analysis of electron beam emittance growth caused by coherent synchrotron radiation

    CERN Document Server

    Hajima, R

    2003-01-01

    A first-order transform matrix is proposed for calculating electron beam emittance dilution arising from coherent synchrotron radiation (CSR) in a next-generation light source based on an energy-recovery linac. The matrix approach enables us to scan numerous parameters for the design of achromatic cells of minimum emittance dilution. The emittance dilution can be minimized when the envelope of CSR wake dispersion matches the betatron function envelope at the achromatic cell exit. (author)

  14. Ultrafast Electron Dynamics in Solar Energy Conversion.

    Science.gov (United States)

    Ponseca, Carlito S; Chábera, Pavel; Uhlig, Jens; Persson, Petter; Sundström, Villy

    2017-08-23

    Electrons are the workhorses of solar energy conversion. Conversion of the energy of light to electricity in photovoltaics, or to energy-rich molecules (solar fuel) through photocatalytic processes, invariably starts with photoinduced generation of energy-rich electrons. The harvesting of these electrons in practical devices rests on a series of electron transfer processes whose dynamics and efficiencies determine the function of materials and devices. To capture the energy of a photogenerated electron-hole pair in a solar cell material, charges of opposite sign have to be separated against electrostatic attractions, prevented from recombining and being transported through the active material to electrodes where they can be extracted. In photocatalytic solar fuel production, these electron processes are coupled to chemical reactions leading to storage of the energy of light in chemical bonds. With the focus on the ultrafast time scale, we here discuss the light-induced electron processes underlying the function of several molecular and hybrid materials currently under development for solar energy applications in dye or quantum dot-sensitized solar cells, polymer-fullerene polymer solar cells, organometal halide perovskite solar cells, and finally some photocatalytic systems.

  15. Ultrafast transmission electron microscopy using a laser-driven field emitter: femtosecond resolution with a high coherence electron beam

    CERN Document Server

    Feist, Armin; da Silva, Nara Rubiano; Danz, Thomas; Möller, Marcel; Priebe, Katharina E; Domröse, Till; Gatzmann, J Gregor; Rost, Stefan; Schauss, Jakob; Strauch, Stefanie; Bormann, Reiner; Sivis, Murat; Schäfer, Sascha; Ropers, Claus

    2016-01-01

    We present the development of the first ultrafast transmission electron microscope (UTEM) driven by localized photoemission from a field emitter cathode. We describe the implementation of the instrument, the photoemitter concept and the quantitative electron beam parameters achieved. Establishing a new source for ultrafast TEM, the G\\"ottingen UTEM employs nano-localized linear photoemission from a Schottky emitter, which enables operation with freely tunable temporal structure, from continuous wave to femtosecond pulsed mode. Using this emission mechanism, we achieve record pulse properties in ultrafast electron microscopy of 9 {\\AA} focused beam diameter, 200 fs pulse duration and 0.6 eV energy width. We illustrate the possibility to conduct ultrafast imaging, diffraction, holography and spectroscopy with this instrument and also discuss opportunities to harness quantum coherent interactions between intense laser fields and free electron beams.

  16. Suppression of Emittance Growth Using a Shaped Cold Atom Electron and Ion Source

    Science.gov (United States)

    Thompson, D. J.; Murphy, D.; Speirs, R. W.; van Bijnen, R. M. W.; McCulloch, A. J.; Scholten, R. E.; Sparkes, B. M.

    2016-11-01

    We demonstrate precise control of charged particle bunch shape with a cold atom electron and ion source to create bunches with linear and, therefore, reversible Coulomb expansion. Using ultracold charged particles enables detailed observation of space-charge effects without loss of information from thermal diffusion, unambiguously demonstrating that shaping in three dimensions can result in a marked reduction of Coulomb-driven emittance growth. We show that the emittance growth suppression is accompanied by an increase in bunch focusability and brightness, improvements necessary for the development of sources capable of coherent single-shot ultrafast electron diffraction of noncrystalline objects, with applications ranging from femtosecond chemistry to materials science and rational drug design.

  17. System for transporting an electron beam to the atmosphere for a gun with a plasma emitter

    Science.gov (United States)

    Kornilov, S. Yu.; Rempe, N. G.; Shidlovskiy, S. V.

    2016-06-01

    We report on the results of simulation of the gas flow in a gun with a plasma emitter and in the system for extracting the electron beam to the atmosphere, constructed on the basis of standard gasdynamic windows (GDWs). The design of the gun and GDWs is described. Calculations are performed for a pressure of about 10-3 Torr in the electron beam generation range. It is shown that the pressure drop to the atmospheric pressure in the system of electron beam extraction to the atmosphere can be ensured by two GDW stages evacuated by pumps with optimal performance.

  18. Intrinsic beam emittance of laser-accelerated electrons measured by x-ray spectroscopic imaging.

    Science.gov (United States)

    Golovin, G; Banerjee, S; Liu, C; Chen, S; Zhang, J; Zhao, B; Zhang, P; Veale, M; Wilson, M; Seller, P; Umstadter, D

    2016-04-19

    The recent combination of ultra-intense lasers and laser-accelerated electron beams is enabling the development of a new generation of compact x-ray light sources, the coherence of which depends directly on electron beam emittance. Although the emittance of accelerated electron beams can be low, it can grow due to the effects of space charge during free-space propagation. Direct experimental measurement of this important property is complicated by micron-scale beam sizes, and the presence of intense fields at the location where space charge acts. Reported here is a novel, non-destructive, single-shot method that overcame this problem. It employed an intense laser probe pulse, and spectroscopic imaging of the inverse-Compton scattered x-rays, allowing measurement of an ultra-low value for the normalized transverse emittance, 0.15 (±0.06) π mm mrad, as well as study of its subsequent growth upon exiting the accelerator. The technique and results are critical for designing multi-stage laser-wakefield accelerators, and generating high-brightness, spatially coherent x-rays.

  19. Improvement of electron emission characteristics of porous silicon emitter by using cathode reduction and electrochemical oxidation

    Science.gov (United States)

    Li, He; Wenjiang, Wang; Xiaoning, Zhang

    2017-03-01

    A new simple and convenient post-treat technique combined the cathode reduction (CR) and electrochemical oxidation (ECO) was proposed to improve the electron emission properties of the surface-emitting cold cathodes based on the porous silicon (PS). It is demonstrated here that by introducing this new technique combined CR and ECO, the emission properties of the diode have been significantly improved than those as-prepared samples. The experimental results showed that the emission current densities and efficiencies of sample treated by CR were 62 μA/cm2 and 12.10‰, respectively, nearly 2 orders of magnitude higher than those of as-prepared sample. Furthermore, the CR-treated PS emitter shows higher repeatability and stability compared with the as-prepared PS emitter. The scanning electron microscope (SEM), atomic force microscope (AFM), energy dispersive spectrometer (EDS), furier transformed infrared (FTIR) spectroscopy results indicated that the improved mechanism is mainly due to the passivation of the PS, which not only improve the PS morphology by the passivation of the H+ but also improve the uniformity of the oxygen content distribution in the whole PS layer. Therefore, the method combined the CR treatment and ECO is expected to be a valuable technique to enhance the electron emission characteristics of the PS emitter.

  20. Weight Estimation of Electronic Power Conversion Systems

    OpenAIRE

    Wen, Bo

    2011-01-01

    Electronic power conversion systems with large number of power converters have a variety of applications, such as data center, electric vehicles and future smart â nanogridâ in residential home. Those systems could have very different architectures. For example, one system could be based on ac, dc or hybrid power distribution bus, and the bus voltage could be different. Also those systems have great need to develop low-cost architectures which reduce weight, increase efficiency and improve...

  1. Highly reliable field electron emitters produced from reproducible damage-free carbon nanotube composite pastes with optimal inorganic fillers.

    Science.gov (United States)

    Kim, Jae-Woo; Jeong, Jin-Woo; Kang, Jun-Tae; Choi, Sungyoul; Ahn, Seungjoon; Song, Yoon-Ho

    2014-02-14

    Highly reliable field electron emitters were developed using a formulation for reproducible damage-free carbon nanotube (CNT) composite pastes with optimal inorganic fillers and a ball-milling method. We carefully controlled the ball-milling sequence and time to avoid any damage to the CNTs, which incorporated fillers that were fully dispersed as paste constituents. The field electron emitters fabricated by printing the CNT pastes were found to exhibit almost perfect adhesion of the CNT emitters to the cathode, along with good uniformity and reproducibility. A high field enhancement factor of around 10,000 was achieved from the CNT field emitters developed. By selecting nano-sized metal alloys and oxides and using the same formulation sequence, we also developed reliable field emitters that could survive high-temperature post processing. These field emitters had high durability to post vacuum annealing at 950 °C, guaranteeing survival of the brazing process used in the sealing of field emission x-ray tubes. We evaluated the field emitters in a triode configuration in the harsh environment of a tiny vacuum-sealed vessel and observed very reliable operation for 30 h at a high current density of 350 mA cm(-2). The CNT pastes and related field emitters that were developed could be usefully applied in reliable field emission devices.

  2. Highly reliable field electron emitters produced from reproducible damage-free carbon nanotube composite pastes with optimal inorganic fillers

    Science.gov (United States)

    Kim, Jae-Woo; Jeong, Jin-Woo; Kang, Jun-Tae; Choi, Sungyoul; Ahn, Seungjoon; Song, Yoon-Ho

    2014-02-01

    Highly reliable field electron emitters were developed using a formulation for reproducible damage-free carbon nanotube (CNT) composite pastes with optimal inorganic fillers and a ball-milling method. We carefully controlled the ball-milling sequence and time to avoid any damage to the CNTs, which incorporated fillers that were fully dispersed as paste constituents. The field electron emitters fabricated by printing the CNT pastes were found to exhibit almost perfect adhesion of the CNT emitters to the cathode, along with good uniformity and reproducibility. A high field enhancement factor of around 10 000 was achieved from the CNT field emitters developed. By selecting nano-sized metal alloys and oxides and using the same formulation sequence, we also developed reliable field emitters that could survive high-temperature post processing. These field emitters had high durability to post vacuum annealing at 950 °C, guaranteeing survival of the brazing process used in the sealing of field emission x-ray tubes. We evaluated the field emitters in a triode configuration in the harsh environment of a tiny vacuum-sealed vessel and observed very reliable operation for 30 h at a high current density of 350 mA cm-2. The CNT pastes and related field emitters that were developed could be usefully applied in reliable field emission devices.

  3. Asymmetrical field emitter

    Science.gov (United States)

    Fleming, J.G.; Smith, B.K.

    1995-10-10

    A method is disclosed for providing a field emitter with an asymmetrical emitter structure having a very sharp tip in close proximity to its gate. One preferred embodiment of the present invention includes an asymmetrical emitter and a gate. The emitter having a tip and a side is coupled to a substrate. The gate is connected to a step in the substrate. The step has a top surface and a side wall that is substantially parallel to the side of the emitter. The tip of the emitter is in close proximity to the gate. The emitter is at an emitter potential, and the gate is at a gate potential such that with the two potentials at appropriate values, electrons are emitted from the emitter. In one embodiment, the gate is separated from the emitter by an oxide layer, and the emitter is etched anisotropically to form its tip and its asymmetrical structure. 17 figs.

  4. Carbon Nanotube Electron Sources: From Electron Beams to Energy Conversion and Optophononics

    OpenAIRE

    Alireza Nojeh

    2014-01-01

    Carbon nanotubes have a host of properties that make them excellent candidates for electron emitters. A significant amount of research has been conducted on nanotube-based field-emitters over the past two decades, and they have been investigated for devices ranging from flat-panel displays to vacuum tubes and electron microscopes. Other electron emission mechanisms from carbon nanotubes, such as photoemission, secondary emission, and thermionic emission, have also been studied, although to a ...

  5. Electron emission properties of gated silicon field emitter arrays driven by laser pulses

    Science.gov (United States)

    Shimawaki, Hidetaka; Nagao, Masayoshi; Neo, Yoichiro; Mimura, Hidenori; Wakaya, Fujio; Takai, Mikio

    2016-10-01

    We report optically modulated electron emission from gated p-type silicon field emitter arrays (Si-FEAs). The device's "volcano" structure is designed to control the photoexcitation of electrons by transmitting light through the small gate aperture, thereby minimizing the photogeneration of slow diffusion carriers outside the depletion region in the tip. Compared to that in the dark, the emission current was enhanced by more than three orders of magnitude in the high field region when irradiated with blue laser pulses. Results from the time-resolved measurements of photoassisted electron emission showed that these possess the same response as the laser pulse with no discernible delay. These results indicate that the volcano device structure is effective at eliminating the generation of diffusion carriers and that a fully optimized FEA is promising as a photocathode for producing high-speed modulated electron beams.

  6. Radiotoxicity induced by Auger electron emitters in human osteosarcoma cell line using comet assay

    Institute of Scientific and Technical Information of China (English)

    XU Yu-Jie; LI Qing-Nuan; ZHU Ran; ZHU Ben-Xing; ZHANG Yong-Ping; ZHANG Xiao-Dong; FAN Wo; HONG Cheng-Jiao; LI Wen-Xin

    2003-01-01

    The comet assay (single cell gel electrophoresis assay) was used to evaluate the radiotoxicity of Augerelectron emitters in the human osteosarcoma cell line (HOS-8603). After internal exposure to 67Ga-EDTMP, the sar-coma cell has been injured severely. The comet length was longer along with the increase of dose, the appearance ofcomet tail was different from that with respect to the 60Co γ-ray irradiation. DNA damage of cell was mainly due tothe radiation effect of Auger electrons. The 67Ga may be a therapeutic radionuclide with good prospect for tumortreatment and palliation of bone pain induced by metastasis.

  7. Measurements and simulations of ultralow emittance and ultrashort electron beams in the linac coherent light source.

    Science.gov (United States)

    Ding, Y; Brachmann, A; Decker, F-J; Dowell, D; Emma, P; Frisch, J; Gilevich, S; Hays, G; Hering, Ph; Huang, Z; Iverson, R; Loos, H; Miahnahri, A; Nuhn, H-D; Ratner, D; Turner, J; Welch, J; White, W; Wu, J

    2009-06-26

    The Linac Coherent Light Source (LCLS) is an x-ray free-electron laser project presently in a commissioning phase at the SLAC National Accelerator Laboratory. We report here on very low-emittance measurements made at low bunch charge, and a few femtosecond bunch length produced by the LCLS bunch compressors. Start-to-end simulations associated with these beam parameters show the possibilities of generating hundreds of GW at 1.5 A x-ray wavelength and nearly a single longitudinally coherent spike at 1.5 nm with 2-fs duration.

  8. High efficiency light source using solid-state emitter and down-conversion material

    Science.gov (United States)

    Narendran, Nadarajah; Gu, Yimin; Freyssinier, Jean Paul

    2010-10-26

    A light emitting apparatus includes a source of light for emitting light; a down conversion material receiving the emitted light, and converting the emitted light into transmitted light and backward transmitted light; and an optic device configured to receive the backward transmitted light and transfer the backward transmitted light outside of the optic device. The source of light is a semiconductor light emitting diode, a laser diode (LD), or a resonant cavity light emitting diode (RCLED). The down conversion material includes one of phosphor or other material for absorbing light in one spectral region and emitting light in another spectral region. The optic device, or lens, includes light transmissive material.

  9. Formation of compressed flat electron beams with high transverse-emittance ratios

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, J. [Fermilab; Institute of Fluid Physics, CAEP, China; Piot, P. [Northern Illinois University; Fermilab; Mihalcea, D. [Northern Illinois University; Prokop, C. R. [Northern Illinois University

    2014-08-01

    Flat beams—beams with asymmetric transverse emittances—have important applications in novel light-source concepts and advanced-acceleration schemes and could possibly alleviate the need for damping rings in lepton colliders. Over the last decade, a flat beam generation technique based on the conversion of an angular-momentum-dominated beam was proposed and experimentally tested. In this paper we explore the production of compressed flat beams. We especially investigate and optimize the flat beam transformation for beams with substantial fractional energy spread. We use as a simulation example the photoinjector of Fermilab’s Advanced Superconducting Test Accelerator. The optimizations of the flat beam generation and compression at Advanced Superconducting Test Accelerator were done via start-to-end numerical simulations for bunch charges of 3.2 nC, 1.0 nC, and 20 pC at ~37 MeV. The optimized emittances of flat beams with different bunch charges were found to be 0.25 μm (emittance ratio is ~400), 0.13 μm, 15 nm before compression, and 0.41 μm, 0.20 μm, 16 nm after full compression, respectively, with peak currents as high as 5.5 kA for a 3.2-nC flat beam. These parameters are consistent with requirements needed to excite wakefields in asymmetric dielectric-lined waveguides or produce significant photon flux using small-gap micro-undulators.

  10. Emittance growth due to static and radiative space charge forces in an electron bunch compressor

    Science.gov (United States)

    Talman, Richard; Malitsky, Nikolay; Stulle, Frank

    2009-01-01

    Evolution of short intense electron bunches passing through bunch-compressing beam lines is studied using the UAL (Unified Accelerator Libraries) string space charge formulation [R. Talman, Phys. Rev. ST Accel. Beams 7, 100701 (2004)PRABFM1098-440210.1103/PhysRevSTAB.7.100701; N. Malitsky and R. Talman, in Proceedings of the 9th European Particle Accelerator Conference, Lucerne, 2004 (EPS-AG, Lucerne, 2004); R. Talman, Accelerator X-Ray Sources (Wiley-VCH, Weinheim, 2006), Chap. 13]. Three major configurations are studied, with the first most important and studied in greatest detail (because actual experimental results are available and the same results have been simulated with other codes): (i) Experimental bunch compression results were obtained at CTF-II, the CERN test facility for the “Compact Linear Collider” using electrons of about 40 MeV. Previous simulations of these results have been performed (using TraFiC4* [A. Kabel , Nucl. Instrum. Methods Phys. Res., Sect. A 455, 185 (2000)NIMAER0168-900210.1016/S0168-9002(00)00729-4] and ELEGANT [M. Borland, Argonne National Laboratory Report No. LS-287, 2000]). All three simulations are in fair agreement with the data except that the UAL simulation predicts a substantial dependence of horizontal emittance γx on beam width (as controlled by the lattice βx function) at the compressor location. This is consistent with the experimental observations, but inconsistent with other simulations. Excellent agreement concerning dependence of bunch energy loss on bunch length and magnetic field strength [L. Groening , in Proceedings of the Particle Accelerator Conference, Chicago, IL, 2001 (IEEE, New York, 2001), http://groening.home.cern/groening/csr_00.htm] confirms our understanding of the role played by coherent synchrotron radiation (CSR). (ii) A controlled comparison is made between the predictions of the UAL code and those of CSRTrack [M. Dohlus and T. Limberg, in Proceedings of the 2004 FEL Conference, pp. 18

  11. Nano-modulated electron beams via electron diffraction and emittance exchange for coherent x-ray generation

    CERN Document Server

    Nanni, Emilio A; Moncton, David E

    2015-01-01

    A new method for generation of relativistic electron beams with current modulations at nanometer scale and below is presented. The current modulation is produced by diffracting relativistic electrons in perfect crystal Si, accelerating the diffracted beam and imaging the crystal structure, then transferring the image into the temporal dimension via emittance exchange. The modulation period can be tuned by adjusting electron optics after diffraction. This tunable longitudinal modulation can have a period as short as a few angstroms, enabling production of coherent hard x-rays from a device based on inverse Compton scattering with total length of a few meters. Electron beam simulations from cathode emission through diffraction, acceleration and image formation with variable magnification are presented along with estimates of the coherent x-ray output properties.

  12. Education and solar conversion. Demonstrating electron transfer

    Energy Technology Data Exchange (ETDEWEB)

    Smestad, Greg P. [Institute of Physical Chemistry, ICP-2, Swiss Federal Institute of Technology, EPFL, CH-1015 Lausanne (Switzerland)

    1998-07-23

    A simplified solar cell fabrication procedure is presented that uses natural anthocyanin or chlorophyll dyes extracted from plants. This procedure illustrates how interdisciplinary science can be taught at lower division university and upper division high school levels for an understanding of renewable energy as well as basic science concepts. Electron transfer occurs on the Earth in the mitochondrial membranes found in living cells, and in the thylakoid membranes found in the photosynthetic cells of green plants. Since we depend on the results of this electron and energy transfer, e.g. in our use of petroleum and agricultural products, it is desirable to understand and communicate how the electron transfer works. The simplified solar cell fabrication procedure, based on nanocrystalline dye-sensitized solar cells, has therefore been developed so that it can be inexpensively reproduced and utilized in the teaching of basic principles in biology, chemistry, physics, and environmental science. A water-based solution of commercial nanocrystalline titanium dioxide (TiO{sub 2}) powder is used to deposit a highly porous semiconductor electron acceptor. This acceptor couples the light-driven processes occurring at an organic dye to the macroscopic world and an external electrical circuit. Materials science and semiconductor physics are emphasized during the deposition of the sintered TiO{sub 2} nanocrystalline ceramic film. Chelation, complexation and molecular self-assembly are demonstrated during the attachment of the dye molecule to the surface of the TiO{sub 2} semiconductor particles. Environmental chemistry and energy conversion can be linked to these concepts via the regenerative oxidation and reduction cycle found in the cell. The resulting device, made in under 3 h, can be used as a light detector or power generator that produces 0.4-0.5 V at open circuit, and 1-2 mA per square cm under solar illumination

  13. Generation and application of channeling X-rays using a novel, low-emittance electron beam—Status and plans

    Energy Technology Data Exchange (ETDEWEB)

    Gabella, W.E., E-mail: b.gabella@vanderbilt.edu [Department of Physics and Astronomy, Vanderbilt University, Nashville, TN (United States); Brau, C.A. [Department of Physics and Astronomy, Vanderbilt University, Nashville, TN (United States); Choi, B.K. [Department of Electrical Engineering and Computer Science, Vanderbilt University, Nashville, TN (United States); Ivanov, B.; Jarvis, J.D.; Mendenhall, M.H. [Department of Physics and Astronomy, Vanderbilt University, Nashville, TN (United States); Piot, P.; Mihalcea, D. [Department of Physics, Northern Illinois University, Dekalb, IL (United States); Fermi National Accelerator Laboratory, Batavia, IL (United States); Carrigan, R. [Fermi National Accelerator Laboratory, Batavia, IL (United States); Wagner, W. [Helmholtz Zentrum Dresden-Rossendorf, Institute of Radiation Physics, Dresden (Germany)

    2013-08-15

    We plan to use very small emittance electron beams created from our novel, single tip cathodes to make a channeling-radiation X-ray source for X-ray imaging, especially phase contrast imaging. We calculate that we can preserve the electron emittance from the source to the crystal, and focus to a 40 nm spot on the crystal face for 40 MeV electrons. This yields an X-ray source with good coherence properties. We discuss our plan for experiments at Fermilab with 4.5 MeV electrons at the High Brightness Electron Source Laboratory, and with 40 MeV electrons at the Advanced Superconducting Test Accelerator. We also present the state of our art with cathode construction and testing. Electrons come from the cathodes by field-emission, with the electric field enhanced by geometric properties of a very small, robust diamond tip. This can create an electron beam with very small emittance. We estimate that the normalized emittance of such a beam at the cathode is 3 nm rad. We currently test the cathodes in DC, high-voltage test stands. We will begin experiments placing the cathodes in RF guns in early 2013.

  14. Flexible control of femtosecond pulse duration and separation using an emittance-spoiling foil in x-ray free-electron lasers

    Energy Technology Data Exchange (ETDEWEB)

    Ding, Y. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Behrens, C. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Coffee, R. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Decker, F. -J. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Emma, P. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Field, C. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Helml, W. [Technische Univ. Munchen, Garching (Germany); Huang, Z. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Krejcik, P. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Krzywinski, J. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Loos, H. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Lutman, A. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Marinelli, A. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Maxwell, T. J. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Turner, J. [SLAC National Accelerator Lab., Menlo Park, CA (United States)

    2015-06-22

    We report experimental studies of generating and controlling femtosecond x-ray pulses in free-electron lasers (FELs) using an emittance spoiling foil. By selectivity spoiling the transverse emittance of the electron beam, the output pulse duration or double-pulse separation is adjusted with a variable size single or double slotted foil. Measurements were performed with an X-band transverse deflector located downstream of the FEL undulator, from which both the FEL lasing and emittance spoiling effects are observed directly.

  15. Observation of Electron Cloud Instabilities and Emittance Dilution at the Cornell Electron-Positron Storage Ring Test Accelerator

    Science.gov (United States)

    Holtzapple, R. L.; Billing, M. G.; Campbell, R. C.; Dugan, G. F.; Flanagan, J.; McArdle, K. E.; Miller, M. I.; Palmer, M. A.; Ramirez, G. A.; Sonnad, K. G.; Totten, M. M.; Tucker, S. L.; Williams, H. A.

    2016-04-01

    Electron cloud related emittance dilution and instabilities of bunch trains limit the performance of high intensity circular colliders. One of the key goals of the Cornell electron-positron storage ring Test Accelerator (CesrTA) research program is to improve our understanding of how the electron cloud alters the dynamics of bunches within the train. Single bunch beam diagnotics have been developed to measure the beam spectra, vertical beam size, two important dynamical effects of beams interacting with the electron cloud, for bunch trains on a turn-by-turn basis. Experiments have been performed at CesrTA to probe the interaction of the electron cloud with stored positron bunch trains. The purpose of these experiments was to characterize the dependence of beam-electron cloud interactions on the machine parameters such as bunch spacing, vertical chromaticity, and bunch current. The beam dynamics of the stored beam, in the presence of the electron cloud, was quantified using: 1) a gated beam position monitor (BPM) and spectrum analyzer to measure the bunch-by-bunch frequency spectrum of the bunch trains; 2) an x-ray beam size monitor to record the bunch-by-bunch, turn-by-turn vertical size of each bunch within the trains. In this paper we report on the observations from these experiments and analyze the effects of the electron cloud on the stability of bunches in a train under many different operational conditions.

  16. Low emittance design of the electron gun and the focusing channel of the Compact Linear Collider drive beam

    Science.gov (United States)

    Dayyani Kelisani, M.; Doebert, S.; Aslaninejad, M.

    2017-04-01

    For the Compact Linear Collider project at CERN, the power for the main linacs is extracted from a drive beam generated from a high current electron source. The design of the electron source and its subsequent focusing channel has a great impact on the beam dynamic considerations of the drive beam. We report the design of a thermionic electron source and the subsequent focusing channels with the goal of production of a high quality beam with a very small emittance.

  17. Emittance exchange results

    Energy Technology Data Exchange (ETDEWEB)

    Fliller, R.P., III; /Brookhaven; Koeth, T.; /Rutgers U., Piscataway

    2009-09-01

    The promise of next-generation light sources depends on the availability of ultra-low emittance electron sources. One method of producing low transverse emittance beams is to generate a low longitudinal emittance beam and exchange it with a large transverse emittance. Experiments are underway at Fermilab's A0 Photoinjector and ANL's Argonne Wakefield Accelerator using the exchange scheme of Kim and Sessler. The experiment at the A0 Photoinjector exchanges a large longitudinal emittance with a small transverse emittance. AWA expects to exchange a large transverse emittance with a small longitudinal emittance. In this paper we discuss recent results at A0 and AWA and future plans for these experiments.

  18. Emittance Exchange Results

    Energy Technology Data Exchange (ETDEWEB)

    Fliller III,R.; Koeth, T.

    2009-05-04

    The promise of next-generation light sources depends on the availability of ultra-low emittance electron sources. One method of producing low transverse emittance beams is to generate a low longitudinal emittance beam and exchange it with a large transverse emittance. Experiments are underway at Fermilab's A0 Photoinjector and ANL's Argonne Wakefield Accelerator using the exchange scheme of Kim and Sessler. The experiment at the A0 Photoinjector exchanges a large longitudinal emittance with a small transverse emittance. AWA expects to exchange a large transverse emittance with a small longitudinal emittance. In this paper we discuss recent results at A0 and AWA and future plans for these experiments.

  19. Photoelectrochemical solar conversion systems molecular and electronic aspects

    CERN Document Server

    Munoz, Andres G

    2012-01-01

    Providing new insights into the molecular and electronic processes involved in the conversion of sunlight into chemical products, Photoelectrochemical Solar Conversion Systems: Molecular and Electronic Aspects begins with an historical overview and a survey of recent developments in the electrochemistry of semiconductors and spectroscopic techniques. It then provides a comprehensive introduction to the science of conversion cells, reviews current issues and potential directions, and covers a wide range of materials from organic to inorganic cells.Employing a tutorial organization with balanced

  20. The Conversion and operation of the Cornell electron storage ring as a test accelerator (cesrta) for damping rings research and development

    Energy Technology Data Exchange (ETDEWEB)

    Palmer, M.A.; Alexander, J.; Byrd, J.; Celata, C.M.; Corlett, J.; De Santis, S.; Furman, M.; Jackson, A.; Kraft, R.; Munson, D.; Penn, G.; Plate, D.; Rawlins, A.; Venturini, M.; Zisman, M.; Billing, M.; Calvey, J.; Chapman, S.; Codner, G.; Conolly, C.; Crittenden, J.; Dobbins, J.; Dugan, G.; Fontes, E.; Forster, M.; Gallagher, R.; Gray, S.; Greenwald, S.; Hartill, D.; Hopkins, W.; Kandaswamy, J.; Kreinick, D.; Li, Y.; Liu, X.; Livezey, J.; Lyndaker, A.; Medjidzade, V.; Meller, R.; Peck, S.; Peterson, D.; Rendina, M.; Revesz, P.; Rice, D.; Rider, N.; Rubin, D.; Sagan, D.; Savino, J.; Seeley, R.; Sexton, J.; Shanks, J.; Sikora, J.; Smolenski, K.; Strohman, C.; Temnykh, A.; tigner, M.; Whitney, W.; Williams, H.; Vishniakou, S.; Wilkens, T.; Harkay, K.; Holtzapple, R.; Smith, E.; Jones, J.; Wolski, A.; He, Y.; Ross, M.; Tan, C.Y.; Zwaska, R.; Flanagan, J.; Jain, P.; Kanazawa, K.; Ohmi, K.; Sakai, H.; Shibata, K.; Suetsugu, Y.; Kharakh, D.; Pivi, M.; Wang, L.

    2009-05-01

    In March of 2008, the Cornell Electron Storage Ring (CESR) concluded twenty eight years of colliding beam operations for the CLEO high energy physics experiment. We have reconfigured CESR as an ultra low emittance damping ring for use as a test accelerator (CesrTA) for International Linear Collider (ILC) damping ring R&D. The primary goals of the CesrTA program are to achieve a beam emittance approaching that of the ILC Damping Rings with a positron beam, to investigate the interaction of the electron cloud with both low emittance positron and electron beams, to explore methods to suppress the electron cloud, and to develop suitable advanced instrumentation required for these experimental studies (in particular a fast x-ray beam size monitor capable of single pass measurements of individual bunches). We report on progress with the CESR conversion activities, the status and schedule for the experimental program, and the first experimental results that have been obtained.

  1. Initial observations of high-charge, low-emittance electron beams at HIBAF (High Brightness Accelerator FEL)

    Energy Technology Data Exchange (ETDEWEB)

    Lumpkin, A.H.; Feldman, R.B.; Carsten, B.E.; Feldman, D.W.; Sheffield, R.L.; Stein, W.E.; Johnson, W.J.; Thode, L.E.; Bender, S.C.; Busch, G.E.

    1990-01-01

    We report our initial measurements of bright (high-charge, low-emittance) electron beams generated at the Los Alamos High Brightness Accelerator FEL (HIBAF) Facility. Normalized emittance values of less than 50 {pi} mm-mrad for charges ranging from 0.7 to 8.7 nC were obtained for single micropulses at a y-waist and at an energy of 14.7 MeV. These measurements were part of the commissioning campaign on the HIBAF photoelectric injector. Macropulse measurements have also been performed and are compared with PARMELA simulations. 5 refs., 8 figs., 3 tabs.

  2. Ion Emittance Growth Due to Focusing Modulation from Slipping Electron Bunch

    Energy Technology Data Exchange (ETDEWEB)

    Wang, G. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.

    2015-02-17

    Low energy RHIC operation has to be operated at an energy ranging from γ = 4.1 to γ = 10. The energy variation causes the change of revolution frequency. While the rf system for the circulating ion will operate at an exact harmonic of the revolution frequency (h=60 for 4.5 MHz rf and h=360 for 28 MHz rf.), the superconducting rf system for the cooling electron beam does not have a frequency tuning range that is wide enough to cover the required changes of revolution frequency. As a result, electron bunches will sit at different locations along the ion bunch from turn to turn, i.e. the slipping of the electron bunch with respect to the circulating ion bunch. At cooling section, ions see a coherent focusing force due to the electrons’ space charge, which differs from turn to turn due to the slipping. We will try to estimate how this irregular focusing affects the transverse emittance of the ion bunch.

  3. Emittance and Energy Diagnostics for Electron Beams with Large Momentum Spread

    CERN Document Server

    Olvegård, Maja; Thibaut, Lefevre; Enrico, Bravin

    Olvegård, M. 2013. Emittance and Energy Diagnostics for Electron Beams with Large Momentum Spread. Acta Universitatis Upsaliensis. Digital Comprehensive Summaries of Uppsala Dissertations from the Faculty of Science and Technology 1036. 75 pp. Uppsala. ISBN 978-91-554-8646-4. Following the discovery of the Higgs-like boson at the Large Hadron Collider, there is demand for precision measurements on recent findings. The Compact Linear Collider, CLIC, is a candidate for a future linear electron-positron collider for such precision measurements. In CLIC, the beams will be brought to collisions in the multi-TeV regime through high gradient acceleration with high frequency RF power. A high intensity electron beam, the so-called drive beam, will serve as the power source for the main beam, as the drive beam is decelerated in special structures, from which power is extracted and transfered to the main beam. When the drive beam is decelerated the beam quality deteriorates and the momentum spread increases, which make...

  4. Emittance growth due to static and radiative space charge forces in an electron bunch compressor

    Directory of Open Access Journals (Sweden)

    Richard Talman

    2009-01-01

    Full Text Available Evolution of short intense electron bunches passing through bunch-compressing beam lines is studied using the UAL (Unified Accelerator Libraries string space charge formulation [R. Talman, Phys. Rev. ST Accel. Beams 7, 100701 (2004PRABFM1098-440210.1103/PhysRevSTAB.7.100701; N. Malitsky and R. Talman, in Proceedings of the 9th European Particle Accelerator Conference, Lucerne, 2004 (EPS-AG, Lucerne, 2004; R. Talman, Accelerator X-Ray Sources (Wiley-VCH, Weinheim, 2006, Chap. 13]. Three major configurations are studied, with the first most important and studied in greatest detail (because actual experimental results are available and the same results have been simulated with other codes: (i Experimental bunch compression results were obtained at CTF-II, the CERN test facility for the “Compact Linear Collider” using electrons of about 40 MeV. Previous simulations of these results have been performed (using TraFiC4* [A. Kabel et al., Nucl. Instrum. Methods Phys. Res., Sect. A 455, 185 (2000NIMAER0168-900210.1016/S0168-9002(0000729-4] and ELEGANT [M. Borland, Argonne National Laboratory Report No. LS-287, 2000]. All three simulations are in fair agreement with the data except that the UAL simulation predicts a substantial dependence of horizontal emittance ϵ_{x} on beam width (as controlled by the lattice β_{x} function at the compressor location. This is consistent with the experimental observations, but inconsistent with other simulations. Excellent agreement concerning dependence of bunch energy loss on bunch length and magnetic field strength [L. Groening et al., in Proceedings of the Particle Accelerator Conference, Chicago, IL, 2001 (IEEE, New York, 2001, http://groening.home.cern/groening/csr_00.htm] confirms our understanding of the role played by coherent synchrotron radiation (CSR. (ii A controlled comparison is made between the predictions of the UAL code and those of CSRTrack [M. Dohlus and T. Limberg, in Proceedings of the

  5. Alpha and conversion electron spectroscopy of 238,239Pu and 241Am and alpha-conversion electron coincidence measurements

    Energy Technology Data Exchange (ETDEWEB)

    Dion, Michael P.; Miller, Brian W.; Warren, Glen A.

    2016-09-01

    A technique to determine the isotopics of a mixed actinide sample has been proposed by measuring the coincidence of the alpha particle during radioactive decay with the conversion electron (or Auger) emitted during the relaxation of the daughter isotope. This presents a unique signature to allow the deconvolution of isotopes that possess overlapping alpha particle energy. The work presented here are results of conversion electron spectroscopy of 241Am, 238Pu and 239Pu using a dual-stage peltier-cooled 25 mm2 silicon drift detector. A passivated ion implanted planar silicon detector provided measurements of alpha spectroscopy. The conversion electron spectra were evaluated from 20–55 keV based on fits to the dominant conversion electron emissions, which allowed the relative conversion electron emission intensities to be determined. These measurements provide crucial singles spectral information to aid in the coincident measurement approach.

  6. Planar ultrananocrystalline diamond field emitter in accelerator radio frequency electron injector: Performance metrics

    Energy Technology Data Exchange (ETDEWEB)

    Baryshev, Sergey V., E-mail: sergey.v.baryshev@gmail.com; Antipov, Sergey; Jing, Chunguang; Qiu, Jiaqi [Euclid TechLabs, 365 Remington Blvd., Bolingbrook, Illinois 60440 (United States); High Energy Physics Division, Argonne National Laboratory, 9700 S. Cass Ave., Argonne, Illinois 60439 (United States); Shao, Jiahang; Liu, Wanming; Gai, Wei [High Energy Physics Division, Argonne National Laboratory, 9700 S. Cass Ave., Argonne, Illinois 60439 (United States); Pérez Quintero, Kenneth J.; Sumant, Anirudha V., E-mail: sumant@anl.gov [Center for Nanoscale Materials, Argonne National Laboratory, 9700 S. Cass Ave., Argonne, Illinois 60439 (United States); Kanareykin, Alexei D. [Euclid TechLabs, 365 Remington Blvd., Bolingbrook, Illinois 60440 (United States)

    2014-11-17

    A case performance study of a planar field emission cathode (FEC) based on nitrogen-incorporated ultrananocrystalline diamond, (N)UNCD, was carried out in an RF 1.3 GHz electron gun. The FEC was a 100 nm (N)UNCD film grown on a 20 mm diameter stainless steel disk with a Mo buffer layer. At surface gradients 45–65 MV/m, peak currents of 1–80 mA (equivalent to 0.3–25 mA/cm{sup 2}) were achieved. Imaging with two YAG screens confirmed emission from the (N)UNCD surface with (1) the beam emittance of 1.5 mm × mrad/mm-rms and (2) longitudinal FWHM and rms widths of non-Gaussian energy spread of 0.7% and 11% at an electron energy of 2 MeV. Current stability was tested over the course of 36 × 10{sup 3} RF pulses (equivalent to 288 × 10{sup 6 }GHz oscillations)

  7. Self-modulated field electron emitter: Gated device of integrated Si tip-on-nano-channel

    Science.gov (United States)

    Huang, Zhijun; Huang, Yifeng; Pan, Zhangxu; She, Juncong; Deng, Shaozhi; Chen, Jun; Xu, Ningsheng

    2016-12-01

    We report the featured gated field electron emission devices of Si nano-tips with individually integrated Si nano-channels and the interpretation of the related physics. A rational procedure was developed to fabricate the uniform integrated devices. The electrical and thermal conduction tests demonstrated that the Si nano-channel can limit both the current and heat flows. The integrated devices showed the specialties of self-enhancement and self-regulation. The heat resistance results in the heat accumulation at the tip-apex, inducing the thermally enhanced field electron emission. The self-regulated effect of the electrical resistance is benefit for impeding the current overloading and prevents the emitters from a catastrophic breakdown. The nano-channel-integrated Si nano-tip array exhibited emission current density up to 24.9 mA/cm2 at a gate voltage of 94 V, much higher than that of the Si nano-tip array without an integrated nano-channel.

  8. Enhanced field emission from compound emitters of carbon nanotubes and ZnO tetrapods by electron beam bombardment.

    Science.gov (United States)

    Wei, Lei; Zhang, Xiaobing; Lou, Chaogang; Zhao, Zhiwei; Jing, Chen; Wang, Baoping

    2011-06-01

    The enhancement of field emission from compound emitters of carbon nanotubes and ZnO tetrapods by the electron beam bombardment is reported. After 20 minutes electron bombardment with 6 keV energy, a few bird-nest micro structures are formed in the compound emitters array. As the simulation results shown, the electric field and field emission current density at the tip of ZnO tetrapod are increased due to the influences of these bird-nest micro structures. From the measurement of the field emission performance, it can be seen that the turn-on electric field and threshold electric field of the field emitter array decrease to 0.4 V/microm and 2.4 V/microm respectively. They have decreased 62% and 15% after the electron bombardment. After the electron bombardment, the emission sites density is increased. The field emission images show that the uniformity of field emission has been improved obviously after the proper electron bombardment. The methodology proposed in this paper has a promising application in the field emission devices.

  9. Simulation study of electron cloud induced instabilities and emittance growth for the CERN Large Hadron Collider proton beam

    Directory of Open Access Journals (Sweden)

    E. Benedetto

    2005-12-01

    Full Text Available The electron cloud may cause transverse single-bunch instabilities of proton beams such as those in the Large Hadron Collider (LHC and the CERN Super Proton Synchrotron (SPS. We simulate these instabilities and the consequent emittance growth with the code HEADTAIL, which models the turn-by-turn interaction between the cloud and the beam. Recently some new features were added to the code, in particular, electric conducting boundary conditions at the chamber wall, transverse feedback, and variable beta functions. The sensitivity to several numerical parameters has been studied by varying the number of interaction points between the bunch and the cloud, the phase advance between them, and the number of macroparticles used to represent the protons and the electrons. We present simulation results for both LHC at injection and SPS with LHC-type beam, for different electron-cloud density levels, chromaticities, and bunch intensities. Two regimes with qualitatively different emittance growth are observed: above the threshold of the transverse mode-coupling (TMC type of instability there is a rapid blowup of the beam, while below this threshold a slow, long-term, emittance growth remains. The rise time of the TMC instability caused by the electron cloud is compared with results obtained using an equivalent broadband resonator impedance model, demonstrating reasonable agreement.

  10. INVESTIGATION OF THE MONOCAPILLARY THERMIONIC EMITTER AS A DUAL SOURCE OF IONS AND ELECTRONS

    Science.gov (United States)

    potential concept. Several processes for fabricating multicapillary emitters are described, including stacking fine wires, spark machining...of an electromagnetic pump. Finally, the design and fabrication of a closed cycle (gravity feed) multicapillary thermionic converter are discussed. (Author)

  11. Electron field emission characteristics of graphene/carbon nanotubes hybrid field emitter

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Leifeng, E-mail: chlf@hdu.edu.cn [College of Materials and Environmental Engineering, Hangzhou Dianzi University, Hangzhou 310018 (China); He, Hong; Yu, Hua; Cao, Yiqi [College of Materials and Environmental Engineering, Hangzhou Dianzi University, Hangzhou 310018 (China); Lei, Da, E-mail: leida126@126.com [Ordos College of Inner Mongolia University, Inner Mongolia University, Ordos 017000 (China); Menggen, QiQiGe [Ordos College of Inner Mongolia University, Inner Mongolia University, Ordos 017000 (China); Wu, Chaoxing; Hu, Liqin [College of Physics and Information Engineering, Fuzhou University, Fuzhou 350002 (China)

    2014-10-15

    The graphene (GP) and multi-walled carbon nanotubes (MCNTs) hybrid nanostructure emitter was constructed by a larger scale electrophoretic deposition (EPD) method. The field emission (FE) performance of the hybrid emitter is greatly improved compared with that of only GP or MCNTs emitter. The low turn-on electric field (EF), the low threshold EF and the reliability FE properties are obtained from the hybrid emitter. The better FE properties result from the improved electrical properties. For further enhancement FE of hybrids, Ag Nanoparticles (NPs) were decorated on the hybrids and FE characteristics were also studied. These studies indicate that we can use the hybrid nanostructure to improve conductivity and contact resistance, which results in enhancement of the FE properties.

  12. Current gain above 10 in sub-10 nm base III-Nitride tunneling hot electron transistors with GaN/AlN emitter

    Science.gov (United States)

    Yang, Zhichao; Zhang, Yuewei; Krishnamoorthy, Sriram; Nath, Digbijoy N.; Khurgin, Jacob B.; Rajan, Siddharth

    2016-05-01

    We report on a tunneling hot electron transistor amplifier with common-emitter current gain greater than 10 at a collector current density in excess of 40 kA/cm2. The use of a wide-bandgap GaN/AlN (111 nm/2.5 nm) emitter was found to greatly improve injection efficiency of the emitter and reduce cold electron leakage. With an ultra-thin (8 nm) base, 93% of the injected hot electrons were collected, enabling a common-emitter current gain up to 14.5. This work improves understanding of the quasi-ballistic hot electron transport and may impact the development of high speed devices based on unipolar hot electron transport.

  13. Investigation of slice emittance using an energy-chirped electron beam in a dispersive section for photo injector characterization at PITZ

    Energy Technology Data Exchange (ETDEWEB)

    Ivanisenko, Yevgeniy

    2012-06-15

    This work describes a transverse slice emittance diagnostics with an RMS temporal resolution down to 2 ps that was implemented at the Photo Injector Test facility in Zeuthen (PITZ). The measurements were performed for several bunch charges generated by a laser pulse that has a flat-top temporal profile of 21-22 ps FWHM duration. This diagnostics allows to study the beam projected emittance compensation with a solenoid magnetic field experimentally and therefore contributes to the beam emittance optimization for the needs of short wavelength linac-based FELs in particular. The diagnostics is based upon the usage of electron bunches which have a correlation between the longitudinal position and the momentum of the bunch particles. This property allows to convert the bunch longitudinal distribution into a transverse one in a dipole magnet. A slit with a narrow opening at the dipole exit selects a fraction of the particle ensemble, a slice, which emittance is analyzed at a screen downstream. Slit scan and quadrupole scan techniques can be used to measure the emittance of the slices. In the experiments it was found that the slice emittance values are 5-10% lower than the projected emittance values, indicating a good effectivity of the solenoid compensation. The emittance obtained using quadrupole scan technique has shown different results when compared to slit scan technique due to a beam halo. The observed beam halo in phase space contributes up to 40% of the emittance value while having only 10% of the bunch charge.

  14. Alpha and conversion electron spectroscopy of 238,239Pu and 241Am and alpha-conversion electron coincidence measurements

    Science.gov (United States)

    Dion, Michael P.; Miller, Brian W.; Warren, Glen A.

    2016-09-01

    A technique to determine the isotopic constituents of a mixed actinide sample has been proposed by a coincident alpha-conversion electron measurement. This presents a unique signature to allow the unfolding of isotopes that possess overlapping alpha particle energy and reduce backgrounds of an unseparated sample. The work presented here are results of conversion electron spectroscopy of 241Am, 238Pu and 239Pu using a dual-stage peltier-cooled 25 mm2 silicon drift detector and alpha spectroscopy with a passivated ion implanted planar silicon detector. The conversion electron spectra were evaluated from 20-55 keV based on fits to the dominant conversion electron emissions, which allowed the relative conversion electron emission intensities to be determined. These measurements provide crucial singles spectral information and calibration to aid in the coincident measurement approach. Furthermore, an alpha-conversion electron spectrometer was assembled using the silicon based detectors described and results of a coincident spectrum analysis is reported for 241Am.

  15. Integrated ZnO Nano-Electron-Emitter with Self-Modulated Parasitic Tunneling Field Effect Transistor at the Surface of the p-Si/ZnO Junction

    Science.gov (United States)

    Cao, Tao; Luo, Laitang; Huang, Yifeng; Ye, Bing; She, Juncong; Deng, Shaozhi; Chen, Jun; Xu, Ningsheng

    2016-09-01

    The development of high performance nano-electron-emitter arrays with well reliability still proves challenging. Here, we report a featured integrated nano-electron-emitter. The vertically aligned nano-emitter consists of two segments. The top segment is an intrinsically lightly n-type doped ZnO nano-tip, while the bottom segment is a heavily p-type doped Si nano-pillar (denoted as p-Si/ZnO nano-emitter). The anode voltage not only extracted the electron emission from the emitter apex but also induced the inter-band electron tunneling at the surface of the p-Si/ZnO nano-junction. The designed p-Si/ZnO emitter is equivalent to a ZnO nano-tip individually ballasted by a p-Si/ZnO diode and a parasitic tunneling field effect transistor (TFET) at the surface of the p-Si/ZnO junction. The parasitic TFET provides a channel for the supply of emitting electron, while the p-Si/ZnO diode is benefit for impeding the current overloading and prevent the emitters from a catastrophic breakdown. Well repeatable and stable field emission current were obtained from the p-Si/ZnO nano-emitters. High performance nano-emitters was developed using diamond-like-carbon coated p-Si/ZnO tip array (500 × 500), i.e., 178 μA (4.48 mA/cm2) at 75.7 MV/m.

  16. Integrated ZnO Nano-Electron-Emitter with Self-Modulated Parasitic Tunneling Field Effect Transistor at the Surface of the p-Si/ZnO Junction.

    Science.gov (United States)

    Cao, Tao; Luo, Laitang; Huang, Yifeng; Ye, Bing; She, Juncong; Deng, Shaozhi; Chen, Jun; Xu, Ningsheng

    2016-09-22

    The development of high performance nano-electron-emitter arrays with well reliability still proves challenging. Here, we report a featured integrated nano-electron-emitter. The vertically aligned nano-emitter consists of two segments. The top segment is an intrinsically lightly n-type doped ZnO nano-tip, while the bottom segment is a heavily p-type doped Si nano-pillar (denoted as p-Si/ZnO nano-emitter). The anode voltage not only extracted the electron emission from the emitter apex but also induced the inter-band electron tunneling at the surface of the p-Si/ZnO nano-junction. The designed p-Si/ZnO emitter is equivalent to a ZnO nano-tip individually ballasted by a p-Si/ZnO diode and a parasitic tunneling field effect transistor (TFET) at the surface of the p-Si/ZnO junction. The parasitic TFET provides a channel for the supply of emitting electron, while the p-Si/ZnO diode is benefit for impeding the current overloading and prevent the emitters from a catastrophic breakdown. Well repeatable and stable field emission current were obtained from the p-Si/ZnO nano-emitters. High performance nano-emitters was developed using diamond-like-carbon coated p-Si/ZnO tip array (500 × 500), i.e., 178 μA (4.48 mA/cm(2)) at 75.7 MV/m.

  17. Integrated ZnO Nano-Electron-Emitter with Self-Modulated Parasitic Tunneling Field Effect Transistor at the Surface of the p-Si/ZnO Junction

    Science.gov (United States)

    Cao, Tao; Luo, Laitang; Huang, Yifeng; Ye, Bing; She, Juncong; Deng, Shaozhi; Chen, Jun; Xu, Ningsheng

    2016-01-01

    The development of high performance nano-electron-emitter arrays with well reliability still proves challenging. Here, we report a featured integrated nano-electron-emitter. The vertically aligned nano-emitter consists of two segments. The top segment is an intrinsically lightly n-type doped ZnO nano-tip, while the bottom segment is a heavily p-type doped Si nano-pillar (denoted as p-Si/ZnO nano-emitter). The anode voltage not only extracted the electron emission from the emitter apex but also induced the inter-band electron tunneling at the surface of the p-Si/ZnO nano-junction. The designed p-Si/ZnO emitter is equivalent to a ZnO nano-tip individually ballasted by a p-Si/ZnO diode and a parasitic tunneling field effect transistor (TFET) at the surface of the p-Si/ZnO junction. The parasitic TFET provides a channel for the supply of emitting electron, while the p-Si/ZnO diode is benefit for impeding the current overloading and prevent the emitters from a catastrophic breakdown. Well repeatable and stable field emission current were obtained from the p-Si/ZnO nano-emitters. High performance nano-emitters was developed using diamond-like-carbon coated p-Si/ZnO tip array (500 × 500), i.e., 178 μA (4.48 mA/cm2) at 75.7 MV/m. PMID:27654068

  18. Obtaining the high-current low-energy electron beams in the systems with a plasma emitter

    CERN Document Server

    Devyatkov, V N; Shchanin, P M

    2001-01-01

    Using gas filled diodes with arc and glow-discharge base plasma emitters one investigated into generation and transfer of high-current electron beams. Using a diode with arc discharge base plasma emitter at 15 kV accelerating voltage one obtained a space charge compensated with up to 1 kA current compressed by proper magnetic field from 8 cm diameter up to 1 cm and transported at over 20 cm distance with 70% efficiency. Using a diode with a glow-discharge one obtained a 80 A current and up to 100 A/cm current density beam. In a weak axial magnetic field with B=0.015 T induction such a beam is transported at 30 cm distance

  19. Double emittance exchanger as a bunch compressor for the MaRIE XFEL electron beam line at 1 GeV

    Science.gov (United States)

    Malyzhenkov, Alexander; Carlsten, Bruce E.; Yampolsky, Nikolai A.

    2017-03-01

    We demonstrate an alternative realization of a bunch compressor (specifically, the second bunch compressor for the MaRIE XFEL beamline, 1GeV electron energy) using a double emittance exchanger (EEX) and a telescope in the transverse phase space. We compare our results with a traditional bunch compressor realized via a chicane, taking into account the nonlinear dynamics, Coherent Synchrotron Radiation (CSR) and Space Charge (SC) effects. In particular, we use the Elegant code for tracking particles through the beamline, and analyze the evolution of the eigen-emittances to separate the influence of the CSR/SC effects from the nonlinear dynamics effects. We optimize the scheme parameters to reach a desirable compression factor and minimize the emittance growth. We observe dominant CSR effects in our scheme, resulting in critical emittance growth, and introduce an alternative version of an emittance exchanger with a reduced number of bending magnets to minimize the impact of CSR effects.

  20. Double Emittance Exchanger as a Bunch Compressor for the MaRIE XFEL electron beam line at 1GeV

    Energy Technology Data Exchange (ETDEWEB)

    Malyzhenkov, Alexander [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Northern Illinois Univ., DeKalb, IL (United States); Yampolsky, Nikolai [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Carlsten, Bruce Eric [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-09-22

    We demonstrate an alternative realization of a bunch compressor (specifically the second bunch compressor for the MaRIE XFEL beamline, 1GeV electron energy) using a double emittance exchanger (EEX) and a telescope in the transverse phase space.We compare our results with a traditional bunch compressor realized via chicane, taking into account the nonlinear dynamics, Coherent Synchrotron Radiation (CSR) and Space Charge (SC) effects. In particular, we use the Elegant code for tracking particles through the beam line and analyze the eigen-emittances evolution to separate the influence of the CSR/SC effects from the nonlinear dynamics effects. We optimize the scheme parameters to reach a desirable compression factor and minimize the emittance growth. We observe dominant CSR-effects in our scheme resulting in critical emittance growth and introduce alternative version of an emittance exchanger with a reduced number of bending magnets to minimize the impact of CSR effects.

  1. The X-Ray Beam Imager for Transversal Profiling of Low-Emittance Electron Beam at the SPring-8

    CERN Document Server

    Takano, S; Ohkuma, H

    2005-01-01

    We have developed the X-ray beam imager (XBI) at the accelerator diagnostics beamline I of the SPring-8 to observe transverse profiles of small electron beam of a low-emittance synchrotron light source. The XBI is based on a single Fresnel zone plate (FZP) and an X-ray zooming tube (XZT). The electron beam moving in a bending magnet is imaged by the FZP. Monochromatic X-ray is selected by a double crystal monochromator to avoid the effect of chromatic aberration of the FZP. The X-ray images of the electron beam obtained are converted by the XZT to enlarged images in visible light. The XBI has achieved a superior 1 σ spatial resolution in the micron range, and a fast time resolution of 1 ms. It has also realized a vignetting-free field of view larger than 1.5 mm in diameter on the coordinates of the electron beam, which is not easily obtained by imaging optics using two FZPs. With the XBI, we have successfully measured the profiles of the small electron beam having low vertical emittance in the pm ra...

  2. SPectrometer for Internal Conversion Electrons (SPICE) at TRIUMF-ISAC

    Science.gov (United States)

    Smallcombe, J.; Moukaddam, M.; Evitts, L. J.; Garnsworthy, A. B.; Hallam, S.; Andreoiu, C.; Ball, G. C.; Bolton, C.; Caballero-Folch, R.; Constable, M.; Cross, D. S.; Garrett, P. E.; Hackman, G.; Henderson, J.; Henderson, R.; Ketelhut, S.; Kruecken, R.; Kurchaninov, L.; Park, J.; Pore, J. L.; Rand, E. T.; Ruotsalainen, P.; Smith, J. K.; Svensson, C. E.; Williams, M.

    2016-09-01

    A new ancillary detector, SPICE (SPectrometer for Internal Conversion Electrons) has been constructed and recently commissioned for use with radioactive ion beams at the TRIUMF-ISAC II facility. SPICE is designed to be operated in conjunction with the TIGRESS High-Purity Germanium (HPGe) spectrometer to perform combined in-beam γ-ray and internal-conversion-electron spectroscopy. The main feature of SPICE is high effciency over a wide range of electron energies from 100 to 3500 keV, with an effective reduction of beam-induced backgrounds. SPICE will be a powerful tool to measure conversion coeffcients and E0 transitions in atomic nuclei. A recent in-beam commissioning experiment demonstrates the effectiveness of the basic design concept of SPICE in background suppression.

  3. Measurement of internal conversion electrons from Gd neutron capture

    Energy Technology Data Exchange (ETDEWEB)

    Kandlakunta, P. [Nuclear Engineering Program, Department of Mechanical and Aerospace Engineering, The Ohio State University, Columbus, OH 43210 (United States); Cao, L.R., E-mail: cao.152@osu.edu [Nuclear Engineering Program, Department of Mechanical and Aerospace Engineering, The Ohio State University, Columbus, OH 43210 (United States); Mulligan, P. [Nuclear Engineering Program, Department of Mechanical and Aerospace Engineering, The Ohio State University, Columbus, OH 43210 (United States)

    2013-03-21

    Gadolinium (Gd) is a suitable material for neutron conversion because of its superior neutron absorption cross-section. However, the principal secondary particles that generate electron-hole pairs in a semiconductor detector after Gd neutron capture are low-energy internal conversion (IC) electrons. We measured the IC electron spectrum due to Gd neutron capture by using a thermal neutron beam and a digitizer-based multidetector spectroscopy. We also discussed the effective use of the IC electrons in the context of a twin-detector design and the associated gamma-ray rejection issues. Extensive simulations of the spectra of IC electrons and gamma rays agreed well with the experimental results; both types of results support the feasibility of the proposed n–γ separation method.

  4. Laser X-ray Conversion and Electron Thermal Conductivity*

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The influence of electron thermal conductivity on the laser x-ray conversion in the coupling of 3ωo laser with Au plane target has been investigated by using a non-LTE radiation hydrodynamic code. The non-local electron thermal conductivity is introduced and compared with the other two kinds of the flux-limited Spitzer-Harm description. The results show that the non-local thermal conductivity causes the increase of the laser x-ray conversion efficiency andimportant changes of the plasma state and coupling feature

  5. On the merits of conversion electron Mossbauer spectroscopy in geosciences

    DEFF Research Database (Denmark)

    Gunnlaugsson, H.P.; Bertelsen, P.; Budtz-Jørgensen, Carl;

    2006-01-01

    Described are some applications of conversion electron Mossbauer spectroscopy (CEMS) in geosciences. It is shown how easily this technique can be applied in existing Mossbauer laboratories to investigate natural samples. Some examples demonstrate the kind of information CEMS can give...... on the weathering history or mechanical properties of samples. The possible application of CEMS on Mars is discussed....

  6. Experimental characterization and modeling of a nanofiber-based selective emitter for thermophotovoltaic energy conversion: The effect of optical properties

    Science.gov (United States)

    Aljarrah, M. T.; Wang, R.; Evans, E. A.; Clemons, C. B.; Young, G. W.

    2011-02-01

    Aluminum oxide nanofibers doped with erbium oxide have been synthesized by calcining polymer fibers made by the electrospinning technique using a mixture of aluminum acetate, erbium acetate and polyvinylpyrrolidone dissolved in ethanol. The resulting ceramic fibers are used to fabricate a free-standing selective emitter. The general equation of radiation transfer coupled with experimentally measured optical properties is used to model the net radiation obtained from these structures. It has been found that the index of refraction and the extinction coefficient are direct functions of the erbia doping level in the fibers. The fibers radiated in a selective manner at ˜1.53 μm with an efficiency of about 90%. For a fiber film on a substrate, the effect of film thickness, extinction coefficient and substrate emissivity on the overall emitter emissivity is also investigated in this study. Results show that the emissivity of the film increases as the thickness of the film increases up to a maximum value, after which increasing the film thickness had no effect on emissivity. Furthermore, it has been found that the substrate emissivity increases the amount of off-band radiation. This effect can be mitigated by controlling the film thickness.

  7. Space Charge Correction on Emittance Measurement of Low Energy Electron Beams

    Energy Technology Data Exchange (ETDEWEB)

    Treado, Colleen J.; /Massachusetts U., Amherst

    2012-09-07

    The goal of any particle accelerator is to optimize the transport of a charged particle beam along a set path by confining the beam to a small region close to the design trajectory and directing it accurately along the beamline. To do so in the simplest fashion, accelerators use a system of magnets that exert approximately linear electromagnetic forces on the charged beam. These electromagnets bend the beam along the desired path, in the case of bending magnets, and constrain the beam to the desired area through alternating focusing and defocusing effects, in the case of quadrupole magnets. We can model the transport of such a beam through transfer matrices representing the actions of the various beamline elements. However, space charge effects, produced from self electric fields within the beam, defocus the beam and must be accounted for in the calculation of beam emittance. We present below the preliminary results of a MATLAB code built to model the transport of a charged particle beam through an accelerator and measure the emittance under the influence of space charge effects. We demonstrate the method of correctly calculating the emittance of a beam under space charge effects using a least square fit to determine the initial properties of the beam given the beam size measured at a specific point after transport.

  8. High Stability Electron Field Emitters Synthesized via the Combination of Carbon Nanotubes and N₂-Plasma Grown Ultrananocrystalline Diamond Films.

    Science.gov (United States)

    Chang, Ting-Hsun; Hsieh, Ping-Yen; Kunuku, Srinivasu; Lou, Shiu-Cheng; Manoharan, Divinah; Leou, Keh-Chyang; Lin, I-Nan; Tai, Nyan-Hwa

    2015-12-16

    An electron field emitter with superior electron field emission (EFE) properties and improved lifetime stability is being demonstrated via the combination of carbon nanotubes and the CH4/N2 plasma grown ultrananocrystalline diamond (N-UNCD) films. The resistance of the carbon nanotubes to plasma ion bombardment is improved by the formation of carbon nanocones on the side walls of the carbon nanotubes, thus forming strengthened carbon nanotubes (s-CNTs). The N-UNCD films can thus be grown on s-CNTs, forming N-UNCD/s-CNTs carbon nanocomposite materials. The N-UNCD/s-CNTs films possess good conductivity of σ = 237 S/cm and marvelous EFE properties, such as low turn-on field of (E0) = 3.58 V/μm with large EFE current density of (J(e)) = 1.86 mA/cm(2) at an applied field of 6.0 V/μm. Moreover, the EFE emitters can be operated under 0.19 mA/cm(2) for more than 350 min without showing any sign of degradation. Such a superior EFE property along with high robustness characteristic of these combination of materials are not attainable with neither N-UNCD films nor s-CNTs films alone. Transmission electron microscopic investigations indicated that the N-UNCD films contain needle-like diamond grains encased in a few layers of nanographitic phase, which enhanced markedly the transport of electrons in the N-UNCD films. Moreover, the needle-like diamond grains were nucleated from the s-CNTs without the necessity of forming the interlayer that facilitate the transport of electrons crossing the diamond-to-Si interface. Both these factors contributed to the enhanced EFE behavior of the N-UNCD/s-CNTs films.

  9. Generating femtosecond X-ray pulses using an emittance-spoiling foil in free-electron lasers

    Energy Technology Data Exchange (ETDEWEB)

    Ding, Y., E-mail: ding@slac.stanford.edu; Coffee, R.; Decker, F.-J.; Emma, P.; Field, C.; Huang, Z.; Krejcik, P.; Krzywinski, J.; Loos, H.; Lutman, A.; Marinelli, A.; Maxwell, T. J.; Turner, J. [SLAC National Accelerator Laboratory, Menlo Park, California 94025 (United States); Behrens, C. [Deutsches Elektronen-Synchrotron DESY, Notkestr. 85, 22607 Hamburg (Germany); Helml, W. [Technische Universität München, James-Franck-Straße 1, 85748 Garching (Germany)

    2015-11-09

    Generation of femtosecond to sub-femtosecond pulses is attracting much attention in X-ray free-electron laser user community. One method is to use a slotted, emittance-spoiling foil which was proposed before (P. Emma et al., Phys. Rev. Lett. 92, 074801 (2004)) and has been widely used at the Linac Coherent Light Source. Direct experimental characterization of the slotted-foil performance was previously unfeasible due to a lack of appropriate diagnostics. With a recently installed X-band radio-frequency transverse deflector, we are able to characterize the electron bunch spoiling effect and X-ray pulse when using the slotted foil. We show that few-femtosecond X-ray pulses are generated with flexible control of the single-pulse duration or double-pulse separation with comparison to the theoretical model.

  10. Conversion electron spectroscopy of isobarically purified trapped radioactive ions

    Energy Technology Data Exchange (ETDEWEB)

    Rissanen, J.; Elomaa, V.V.; Eronen, T.; Hakala, J.; Jokinen, A.; Rahaman, S.; Rinta-Antila, S.; Aeystoe, J. [University of Jyvaeskylae, Department of Physics, P.O.B. 35 (Finland)

    2007-11-15

    The feasibility of the JYFLTRAP for in-trap spectroscopy has been studied. Several internally converted transitions have been measured for isomers of fission products with good accuracy. High-resolution spectroscopic data free of source effects have been obtained proving that trapped radioactive ions can provide excellent conversion electron sources. The shortest-lived isomer studied in this work was {sup 117m} Pd with a half-life of 19.1 ms, for which a superior peak-to-total ratio and an excellent line shape at the 9.9 keV conversion electron line have been observed. Detection efficiencies and related phenomena of the present setup are analyzed. (orig.)

  11. Up-Conversion Intersystem Crossing Rates in Organic Emitters for Thermally Activated Delayed Fluorescence: Impact of the Nature of Singlet vs Triplet Excited States

    KAUST Repository

    Samanta, Pralok Kumar

    2017-02-28

    The rates for up-conversion intersystem crossing (UISC) from the T1 state to the S1 state are calculated for a series of organic emitters with an emphasis on thermally activated delayed fluorescence (TADF) materials. Both the spin-orbit coupling and the energy difference between the S1 and T1 states (ΔEST) are evaluated, at the density functional theory (DFT) and time-dependent DFT levels. The calculated UISC rates and ΔEST values are found to be in good agreement with available experimental data. Our results underline that small ΔEST values and sizable spin-orbit coupling matrix elements have to be simultaneously realized in order to facilitate UISC and ultimately TADF. Importantly, the spatial separation of the highest occupied and lowest unoccupied molecular orbitals of the emitter, a widely accepted strategy for the design of TADF molecules, does not necessarily lead to a sufficient reduction in ΔEST; in fact, either a significant charge-transfer (CT) contribution to the T1 state or a minimal energy difference between the local-excitation and charge-transfer triplet states is required to achieve a small ΔEST. Also, having S1 and T1 states of a different nature is found to strongly enhance spin-orbit coupling, which is consistent with the El-Sayed rule for ISC rates. Overall, our results indicate that having either similar energies for the local-excitation and charge-transfer triplet states or the right balance between a substantial CT contribution to T1 and somewhat different natures of the S1 and T1 states, paves the way toward UISC enhancement and thus TADF efficiency improvement.

  12. Current gain in sub-10 nm base GaN tunneling hot electron transistors with AlN emitter barrier

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Zhichao, E-mail: zcyang.phys@gmail.com; Zhang, Yuewei; Nath, Digbijoy N.; Rajan, Siddharth [Department of Electrical and Computer Engineering, The Ohio State University, Columbus, Ohio 43210 (United States); Khurgin, Jacob B. [Department of Electrical and Computer Engineering, The Johns Hopkins University, Baltimore, Maryland 21218 (United States)

    2015-01-19

    We report on Gallium Nitride-based tunneling hot electron transistor amplifier with common-emitter current gain greater than 1. Small signal current gain up to 5 and dc current gain of 1.3 were attained in common-emitter configuration with collector current density in excess of 50 kA/cm{sup 2}. The use of a combination of 1 nm GaN/3 nm AlN layers as an emitter tunneling barrier was found to improve the energy collimation of the injected electrons. These results represent demonstration of unipolar vertical transistors in the III-nitride system that can potentially lead to higher frequency and power microwave devices.

  13. Modeling power electronics and interfacing energy conversion systems

    CERN Document Server

    Simões, Marcelo Godoy

    2017-01-01

    Discusses the application of mathematical and engineering tools for modeling, simulation and control oriented for energy systems, power electronics and renewable energy. This book builds on the background knowledge of electrical circuits, control of dc/dc converters and inverters, energy conversion and power electronics. The book shows readers how to apply computational methods for multi-domain simulation of energy systems and power electronics engineering problems. Each chapter has a brief introduction on the theoretical background, a description of the problems to be solved, and objectives to be achieved. Block diagrams, electrical circuits, mathematical analysis or computer code are covered. Each chapter concludes with discussions on what should be learned, suggestions for further studies and even some experimental work.

  14. Carbon and metal nanotube hybrid structures on graphene as efficient electron field emitters

    Science.gov (United States)

    Heo, Kwang; Lee, Byung Yang; Lee, Hyungwoo; Cho, Dong-guk; Arif, Muhammad; Kim, Kyu Young; Choi, Young Jin; Hong, Seunghun

    2016-07-01

    We report a facile and efficient method for the fabrication of highly-flexible field emission devices by forming tubular hybrid structures based on carbon nanotubes (CNTs) and nickel nanotubes (Ni NTs) on graphene-based flexible substrates. By employing an infiltration process in anodic alumina oxide (AAO) templates followed by Ni electrodeposition, we could fabricate CNT-wrapped Ni NT/graphene hybrid structures. During the electrodeposition process, the CNTs served as Ni nucleation sites, resulting in a large-area array of high aspect-ratio field emitters composed of CNT-wrapped Ni NT hybrid structures. As a proof of concepts, we demonstrate that high-quality flexible field emission devices can be simply fabricated using our method. Remarkably, our proto-type field emission devices exhibited a current density higher by two orders of magnitude compared to other devices fabricated by previous methods, while maintaining its structural integrity in various bending deformations. This novel fabrication strategy can be utilized in various applications such as optoelectronic devices, sensors and energy storage devices.

  15. The {nu}MSM and muon to electron conversion experiments

    Energy Technology Data Exchange (ETDEWEB)

    Canetti, Laurent, E-mail: laurent.canetti@epfl.ch; Shaposhnikov, Mikhail, E-mail: mikhail.shaposhnikov@epfl.ch [EPFL, ITP (Switzerland)

    2013-03-15

    We review briefly the different constraints on the three right-handed neutrinos of the {nu}MSM, an extension of the Standard Model that can explain baryon asymmetry, dark matter and neutrino masses. We include in the discussion the proposed experiments on muon to electron conversion Mu2e (Carey et al., Mu2e Collaboration, 2012), COMET and PRISM (Hungerford, COMET Collaboration, AIP Conf Proc 1182:694, 2009; Cui et al., COMET Collaboration, 2012). We find that the expected sensitivity of these experiments is weaker by about two orders of magnitude than the constraints coming from successful baryogenesis.

  16. Controlled growth of carbon nanotube-graphene hybrid materials for flexible and transparent conductors and electron field emitters.

    Science.gov (United States)

    Nguyen, Duc Dung; Tai, Nyan-Hwa; Chen, Szu-Ying; Chueh, Yu-Lun

    2012-01-21

    We report a versatile synthetic process based on rapid heating and cooling chemical vapor deposition for the growth of carbon nanotube (CNT)-graphene hybrid materials where the thickness of graphene and density of CNTs are properly controlled. Graphene films are demonstrated as an efficient barrier layer for preventing poisoning of iron nanoparticles, which catalyze the growth of CNTs on copper substrates. Based on this method, the opto-electronic and field emission properties of graphene integrated with CNTs can be remarkably tailored. A graphene film exhibits a sheet resistance of 2.15 kΩ sq(-1) with a transmittance of 85.6% (at 550 nm), while a CNT-graphene hybrid film shows an improved sheet resistance of 420 Ω sq(-1) with an optical transmittance of 72.9%. Moreover, CNT-graphene films are demonstrated as effective electron field emitters with low turn-on and threshold electric fields of 2.9 and 3.3 V μm(-1), respectively. The development of CNT-graphene films with a wide range of tunable properties presented in this study shows promising applications in flexible opto-electronic, energy, and sensor devices.

  17. Emittance Reduction between EBIS LINAC and Booster by Electron Beam Cooling; Is Single Pass Cooling Possible?

    Energy Technology Data Exchange (ETDEWEB)

    Hershcovitch,A.

    2008-04-01

    Electron beam cooling is examined as an option to reduce momentum of gold ions exiting the EBIS LINAC before injection into the booster. Electron beam parameters are based on experimental data (obtained at BNL) of electron beams extracted from a plasma cathode. Preliminary calculations indicate that single pass cooling is feasible; momentum spread can be reduced by more than an order of magnitude in less than one meter.

  18. Uncertainties in electron-absorbed fractions and lung doses from inhaled beta-emitters.

    Science.gov (United States)

    Farfán, Eduardo B; Bolch, Wesley E; Huston, Thomas E; Rajon, Didier A; Huh, Chulhaeng; Bolch, W Emmett

    2005-01-01

    The computer code LUDUC (Lung Dose Uncertainty Code), developed at the University of Florida, was originally used to investigate the range of potential doses from the inhalation of either plutonium or uranium oxides. The code employs the ICRP Publication 66 Human Respiratory Tract model; however, rather than using simple point estimates for each of the model parameters associated with particle deposition, clearance, and lung-tissue dosimetry, probability density functions are ascribed to these parameters based upon detailed literature review. These distributions are subsequently sampled within LUDUC using Latin hypercube sampling techniques to generate multiple (e.g., approximately 1,000) sets of input vectors (i.e., trials), each yielding a unique estimate of lung dose. In the present study, the dosimetry component of the ICRP-66 model within LUDUC has been extended to explicitly consider variations in the beta particle absorbed fraction due to corresponding uncertainties and biological variabilities in both source and target tissue depths and thicknesses within the bronchi and bronchioles of the thoracic airways. Example dose distributions are given for the inhalation of absorption Type S compounds of 90Sr (Tmax = 546 keV) and 90Y (Tmax = 2,284 keV) as a function of particle size. Over the particle size range of 0.001 to 1 microm, estimates of total lung dose vary by a factor of 10 for 90Sr particles and by a factor of 4 to 10 for 90Y particles. As the particle size increases to 10 microm, dose uncertainties reach a factor of 100 for both radionuclides. In comparisons to identical exposures scenarios run by the LUDEP 2.0 code, Reference Man doses for inhaled beta-emitters were shown to provide slightly conservative estimates of lung dose compared to those in this study where uncertainties in lung airway histology are considered.

  19. The Spectrometer for Internal Conversion Electrons at TRIUMF-ISAC

    Science.gov (United States)

    Smallcombe, James; Evitts, Lee; Garnsworthy, Adam; Moukaddam, Mohamad; Spice Collaboration

    2016-09-01

    SPICE (SPectrometer for Internal Conversion Electrons) is a powerful tool to measure conversion coefficients and E 0 transitions in nuclei. E 0 transition strengths, which are not accessible by gamma-ray spectroscopy, are a sparsely measured observable. Such transition strengths are particularly sensitive to nuclear shape and state mixing effects and as such are a key item of data in studying the evolution of shape coexistence. SPICE is an ancillary detector that has been commissioned for use with Radioactive Ion Beams (RIBs) at the ISAC-II facility of TRIUMF. The main feature of SPICE is high efficiency over a range of electron energies from 100 to 3500 keV, crucial for work with RIBs, and an effective reduction of beam-induced backgrounds. This is achieved with an upstream magnetic lens, a high- Z photon shield and a large-area lithium-drifted silicon detector. A major theme of the physics program will be the investigation of shape coexistence and state mixing in exotic nuclei. An overview of the main features of SPICE will be presented alongside details of the commissioning and preliminary data from the first experiment studying excited structures in 110Pd. Natural Sciences and Engineering Research Council of Canada (NSERC), Canada Foundation for Innovation (CFI), Ontario Ministry of Research and Innovation (MRI).

  20. ET-22CONVECTION-ENHANCED DELIVERY OF THE AUGER-ELECTRON-EMITTER 125I-UdR: A HIGHLY EFFICIENT THERAPY IN AN ORTHOTOPIC GLIOBLASTOMA XENOGRAFT MODEL

    OpenAIRE

    Halle, Bo; Thisgaard, Helge; Aaberg-Jessen, Charlotte; Olsen, Birgitte; Dam, Johan; Langkjær, Niels; Munthe, Sune; Någren, Kjell; Høilund-Carlsen, Poul Flemming; Kristensen, Bjarne

    2014-01-01

    BACKGROUND: Glioblastomas (GBMs), the most common and malignant primary brain tumors, always recur after standard treatment. In order to develop more efficient therapies, we tested a novel therapeutic approach using the radioactive Auger-electron-emitter (AEE) [125I]5-Iodo-2'-deoxyuridine (125I-UdR). This drug incorporates into DNA of dividing cells and upon decay emission of Auger-electrons causes clusters of double strand breaks leading to cell death. METHODS: In vitro, cells from two GBM s...

  1. High-Resolution Conversion Electron Spectroscopy of Valence Electron Configurations (CESVEC) in Solids

    CERN Multimedia

    2002-01-01

    First measurements with the Zurich $\\beta$-spectrometer on sources from ISOLDE have demonstrated that high resolution spectroscopy of conversion electrons from valence shells is feasible.\\\\ \\\\ This makes possible a novel type of electron spectroscopy (CESVEC) on valence-electron configurations of tracer elements in solids. Thus the density of occupied electron states of impurities in solids has been measured for the first time. Such data constitute a stringent test of state-of-the-art calculations of impurity properties. Based on these results, we are conducting a systematic investigation of impurities in group IV and III-V semiconductors.

  2. Thermionic and Photo-excited Electron Emission for Energy Conversion Processes

    Directory of Open Access Journals (Sweden)

    Patrick T. McCarthy

    2014-12-01

    Full Text Available This article describes advances in thermionic and photoemission materials and applications dating back to the work on thermionic emission by Guthrie in 1873 and the photoelectric effect by Hertz in 1887. Thermionic emission has been employed for electron beam generation from Edison’s work with the light bulb to modern day technologies such as scanning and transmission electron microscopy. The photoelectric effect has been utilized in common devices such as cameras and photocopiers while photovoltaic cells continue to be widely successful and further researched. Limitations in device efficiency and materials have thus far restricted large-scale energy generation sources based on thermionic and photoemission. However, recent advances in the fabrication of nanoscale emitters suggest promising routes for improving both thermionic and photo-enhanced electron emission along with newly developed research concepts, e.g., photonically enhanced thermionic emission. However, the abundance of new emitter materials and reduced dimensions of some nanoscale emitters increases the complexity of electron emission theory and engender new questions related to the dimensionality of the emitter. This work presents derivations of basic two and three-dimensional thermionic and photoemission theory along with comparisons to experimentally acquired data. The resulting theory can be applied to many different material types regardless of composition, bulk and surface structure.

  3. Real-time simulation of finite-frequency noise from a single-electron emitter

    Science.gov (United States)

    Jonckheere, T.; Stoll, T.; Rech, J.; Martin, T.

    2012-01-01

    We study the real-time emission of single electrons from a quantum dot coupled to a one dimensional conductor, using exact diagonalization on a discrete tight-binding chain. We show that, from the calculation of the time evolution of the one-electron states, we have simple access to all the relevant physical quantities in the system. In particular, we are able to compute accurately the finite-frequency current autocorrelation noise. The method that we use is general and versatile, allowing us to study the impact of many different parameters, such as the dot transparency or level position. Our results can be directly compared with existing experiments, and can also serve as a basis for future calculations including electronic interactions using the time-dependent density-matrix renormalization group and other techniques based on tight-binding models.

  4. Evidence for high-energy and low-emittance electron beams using ionization injection of charge in a plasma wakefield accelerator

    CERN Document Server

    Vafaei-Najafabadi, N; Clayton, C E; Joshi, C; Marsh, K A; Mori, W B; Welch, E C; Lu, W; Adli, E; Allen, J; Clarke, C I; Corde, S; Frederico, J; Gessner, S J; Green, S Z; Hogan, M J; Litos, M D; Yakimenko, V

    2015-01-01

    Ionization injection in a plasma wakefield accelerator was investigated experimentally using two lithium plasma sources of different lengths. The ionization of the helium gas, used to confine the lithium, injects electrons in the wake. After acceleration, these injected electrons were observed as a distinct group from the drive beam on the energy spectrometer. They typically have a charge of tens of pC, an energy spread of a few GeV, and a maximum energy of up to 30 GeV. The emittance of this group of electrons can be many times smaller than the initial emittance of the drive beam. The energy scaling for the trapped charge from one plasma length to the other is consistent with the blowout theory of the plasma wakefield.

  5. Development of ballistic hot electron emitter and its applications to parallel processing: active-matrix massive direct-write lithography in vacuum and thin films deposition in solutions

    Science.gov (United States)

    Koshida, N.; Kojima, A.; Ikegami, N.; Suda, R.; Yagi, M.; Shirakashi, J.; Yoshida, T.; Miyaguchi, H.; Muroyama, M.; Nishino, H.; Yoshida, S.; Sugata, M.; Totsu, K.; Esashi, M.

    2015-03-01

    Making the best use of the characteristic features in nanocrystalline Si (nc-Si) ballistic hot electron source, the alternative lithographic technology is presented based on the two approaches: physical excitation in vacuum and chemical reduction in solutions. The nc-Si cold cathode is a kind of metal-insulator-semiconductor (MIS) diode, composed of a thin metal film, an nc-Si layer, an n+-Si substrate, and an ohmic back contact. Under a biased condition, energetic electrons are uniformly and directionally emitted through the thin surface electrodes. In vacuum, this emitter is available for active-matrix drive massive parallel lithography. Arrayed 100×100 emitters (each size: 10×10 μm2, pitch: 100 μm) are fabricated on silicon substrate by conventional planar process, and then every emitter is bonded with integrated complementary metal-oxide-semiconductor (CMOS) driver using through-silicon-via (TSV) interconnect technology. Electron multi-beams emitted from selected devices are focused by a micro-electro-mechanical system (MEMS) condenser lens array and introduced into an accelerating system with a demagnification factor of 100. The electron accelerating voltage is 5 kV. The designed size of each beam landing on the target is 10×10 nm2 in square. Here we discuss the fabrication process of the emitter array with TSV holes, implementation of integrated ctive-matrix driver circuit, the bonding of these components, the construction of electron optics, and the overall operation in the exposure system including the correction of possible aberrations. The experimental results of this mask-less parallel pattern transfer are shown in terms of simple 1:1 projection and parallel lithography under an active-matrix drive scheme. Another application is the use of this emitter as an active electrode supplying highly reducing electrons into solutions. A very small amount of metal-salt solutions is dripped onto the nc-Si emitter surface, and the emitter is driven without

  6. Experimental Development of Low-emittance Field-emission Electron Sources

    Energy Technology Data Exchange (ETDEWEB)

    Lueangaranwong, A. [Northern Illinois Univ., DeKalb, IL (United States). Northern Illinois Center for Accelerator & Detector Development; Buzzard, C. [Northern Illinois Univ., DeKalb, IL (United States); Divan, R. [Argonne National Lab. (ANL), Argonne, IL (United States). Center for Nanoscale Materials; Korampally, V. [Northern Illinois Univ., DeKalb, IL (United States); Piot, P. [Northern Illinois Univ., DeKalb, IL (United States). Northern Illinois Center for Accelerator & Detector Development; Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)

    2016-10-10

    Field emission electron sources are capable of extreme brightness when excited by static or time-dependent electro- magnetic fields. We are currently developing a cathode test stand operating in DC mode with possibility to trigger the emission using ultra-short (~ 100-fs) laser pulses. This contribution describes the status of an experiment to investigate field-emission using cathodes under development at NIU in collaboration with the Argonne’s Center for Nanoscale Materials.

  7. Developing and using the field emitter as a high intensity electron source

    Science.gov (United States)

    Charbonnier, Francis

    1996-03-01

    In the 1940's, Erwin Müller dominated field emission research. The 50's and 60's saw considerable growth in the number of scientists interested in field emission. While many made important contributions, three persons stood out who had different talents and interests. First and foremost: Erwin Müller, a very innovative, creative and skilled inventor and experimentalist. Second: Robert Gomer, equally adept at theory and experiment, with a unique mastery of fundamental physics concepts. Third: Walter Dyke, who was intrigued by the unique properties of field emission and resolved to develop field emission cathodes as high performance electron sources for a variety of electron beam devices. This paper summarizes Dyke's work at Linfield College, Linfield Research Institute and Field Emission Corporation from 1948 to 1972. However, while Dyke established a solid foundation for useful field emission cathodes and investigated several devices, particularly in microwaves, electron optics and flash radiography, he was unable to complete his work and produce commercial devices, except for flash radiography. Many groups have pursued this work in recent years, sometimes with great success. This paper briefly summarizes current work on field emission cathodes and device applications, as this puts Dyke's work in better perspective and adds to its significance.

  8. Emittance growth due to static and radiative space charge forces in an electron bunch compressor

    CERN Document Server

    Talman, Richard; Stulle, Frank

    2009-01-01

    Evolution of short intense electron bunches passing through bunch-compressing beam lines is studied using the UAL (Unified Accelerator Libraries) string space charge formulation [R. Talman, Phys. Rev. ST Accel. Beams 7, 100701 (2004); N. Malitsky and R. Talman, in Proceedings of the 9th European Particle Accelerator Conference, Lucerne, 2004 (EPS-AG, Lucerne, 2004); R. Talman, Accelerator X-Ray Sources (Wiley-VCH, Weinheim, 2006), Chap. 13]. Three major configurations are studied, with the first most important and studied in greatest detail (because actual experimental results are available and the same results have been simulated with other codes): (i) Experimental bunch compression results were obtained at CTF-II, the CERN test facility for the “Compact Linear Collider” using electrons of about 40 MeV. Previous simulations of these results have been performed (using trafic4* [A. Kabel et al., Nucl. Instrum. Methods Phys. Res., Sect. A 455, 185 (2000)] and elegant [M. Borland, Argonne National Laboratory...

  9. Electron to Muon Conversion in Low-Energy Electron-Nucleus Scattering

    CERN Document Server

    Diener, Kai-Peer O

    2004-01-01

    We present an estimate of the electron to muon conversion cross section in fixed-target elastic electron scattering. The matrix element $$ is calculated analytically in two scenarios introducing suitable approximations. We consider on the one hand side the case of three light Dirac neutrinos with CKM-type leptonic mixing and on the other hand a typical see-saw scenario. We evaluate the coulombic contribution to the scattering cross section in the limit of vanishing energy transfer to the nucleus and, thus, obtain a realistic estimate for the total conversion cross section. Although we find that in the see-saw scenario the cross section can be enhanced by as much as twenty orders of magnitude in comparison to the Dirac case, it is still not experimentally accessible.

  10. Electron Bernstein Wave Emission and Mode Conversion Physics on NSTX

    Energy Technology Data Exchange (ETDEWEB)

    Diem, S J; Caughman, J B; Efthimion, P; Kugel, H; LeBlanc, B P; Preinhaelter, J; Sabbagh, S A; Urban, J

    2008-05-21

    NSTX is a spherical tokamak (ST) that operates with ne up to 1020 m-3 and BT less than 0.6 T, cutting off low harmonic electron cyclotron (EC) emission widely used for Te measurements on conventional aspect ratio tokamaks. The electron Bernstein wave (EBW) can propagate in ST plasmas and is emitted at EC harmonics. These properties suggest thermal EBW emission (EBE) may be used for local Te measurements in the ST. Practically, a robust Te(R,t) EBE diagnostic requires EBW transmission efficiencies of > 90% for a wide range of plasma conditions. EBW emission and coupling physics were studied on NSTX with an obliquely viewing EBW to O-mode (B-X-O) diagnostic with two remotely steered antennas, coupled to absolutely calibrated radiometers. While Te(R,t) measurements with EBW emission on NSTX were possible, they were challenged by several issues. Rapid fluctuations in edge ne scale length resulted in > 20% changes in the low harmonic B-X-O transmission efficiency. Also, B-X-O transmission efficiency 2 during H-modes was observed to decay by a factor of 5-10 to less than a few percent. The B-X-O transmission behavior during H-modes was reproduced by EBE simulations that predict that EBW collisional damping can significantly reduce emission when Te < 30 eV inside the B-X-O mode conversion (MC) layer. Initial edge lithium conditioning experiments during H-modes have shown that evaporated lithium can increase Te inside the B-X-O MC layer, significantly increasing B-X-O transmission.

  11. High-Resolution Measurements of Low-Energy Conversion Electrons

    CERN Multimedia

    Gizon, A; Putaux, J

    2002-01-01

    Measurements of low-energy internal conversion electrons have been performed with high energy resolution in some N = 105 odd and odd-odd nuclei using a semi-circular spectrograph associated to a specific tape transport system. These experiments aimed to answer the following questions~: \\begin{itemize} \\item Do M3 isomeric transitions exist in $^{183}$Pt and $^{181}$Os, isotones of $^{184}$Au~? \\item Are the neutron configurations proposed to describe the isomeric and ground states of $^{184}$Au right or wrong~? \\item Does it exist an isomeric state in $^{182}$Ir, isotone of $^{181}$Os, $^{183}$Pt and $^{184}$Au~? \\item What are the spin and parity values of the excited states of $^{182}$Ir~? \\end{itemize} In $^{183}$Pt, the 35.0 keV M3 isomeric transition has been clearly observed and the reduced transition probability has been determined. The deduced hindrance factor is close to that observed in the neighbouring odd-odd $^{184}$Au nucleus. This confirms the neutron configurations previously proposed for the ...

  12. Alpha and conversion electron spectroscopy of {sup 238,239}Pu and {sup 241}Am and alpha-conversion electron coincidence measurements

    Energy Technology Data Exchange (ETDEWEB)

    Dion, Michael P., E-mail: michael.dion@pnnl.gov; Miller, Brian W.; Warren, Glen A.

    2016-09-11

    A technique to determine the isotopic constituents of a mixed actinide sample has been proposed by a coincident alpha-conversion electron measurement. This presents a unique signature to allow the unfolding of isotopes that possess overlapping alpha particle energy and reduce backgrounds of an unseparated sample. The work presented here are results of conversion electron spectroscopy of {sup 241}Am, {sup 238}Pu and {sup 239}Pu using a dual-stage peltier-cooled 25 mm{sup 2} silicon drift detector and alpha spectroscopy with a passivated ion implanted planar silicon detector. The conversion electron spectra were evaluated from 20–55 keV based on fits to the dominant conversion electron emissions, which allowed the relative conversion electron emission intensities to be determined. These measurements provide crucial singles spectral information and calibration to aid in the coincident measurement approach. Furthermore, an alpha-conversion electron spectrometer was assembled using the silicon based detectors described and results of a coincident spectrum analysis is reported for {sup 241}Am.

  13. Cherenkov counting efficiencies for {beta}{sup -}-emitters in dry state in glass vials

    Energy Technology Data Exchange (ETDEWEB)

    Morita-Murase, Yuko; Murakami, Isao; Homma, Yoshio [Laboratory for Radiopharmaceutical Chemistry, Kyoritsu College of Pharmacy, Tokyo (Japan)

    2000-10-01

    Cherenkov counting efficiencies for standardized {beta}{sup -} -emitters in the dry state at the centre of air-filled glass vials were measured with a liquid scintillation spectrometer. Cherenkov counting efficiencies, which are plotted as a function of the average energy of {beta}{sup -}-particles and the internal conversion electrons, give a straight line on log-log scale. (author)

  14. Muon-Electron Conversion in a Family Gauge Boson Model

    CERN Document Server

    Koide, Yoshio

    2016-01-01

    We study the $\\mu$-$e$ conversion in muonic atoms via an exchange of family gauge boson (FGB) $A_{2}^{\\ 1}$ in a $U(3)$ FGB model. Within the class of FGB model, we consider three types of family-number assignments for quarks. We evaluate the $\\mu$-$e$ conversion rate for various target nuclei, and find that next generation $\\mu$-$e$ conversion search experiments can cover entire energy scale of the model for all of types of the quark family-number assignments. We show that the conversion rate in the model is so sensitive to up- and down-quark mixing matrices, $U^{u}$ and $U^{d}$, where the CKM matrix is given by $V_\\text{CKM} = U^{u\\dagger} U^d$. Precise measurements of conversion rates for various target nuclei can identify not only the types of quark family-number assignments, but also each quark mixing matrix individually.

  15. Muon-electron conversion in a family gauge boson model

    Science.gov (United States)

    Koide, Yoshio; Yamanaka, Masato

    2016-11-01

    We study the μ-e conversion in muonic atoms via an exchange of family gauge boson (FGB) A21 in a U (3) FGB model. Within the class of FGB model, we consider three types of family-number assignments for quarks. We evaluate the μ-e conversion rate for various target nuclei, and find that next generation μ-e conversion search experiments can cover entire energy scale of the model for all of types of the quark family-number assignments. We show that the conversion rate in the model is so sensitive to up- and down-quark mixing matrices, Uu and Ud, where the CKM matrix is given by VCKM =Uu†Ud. Precise measurements of conversion rates for various target nuclei can identify not only the types of quark family-number assignments, but also each quark mixing matrix individually.

  16. The Silicon photomultiplier as a metasystem with designed electronics as metadevice for a new receiver-emitter in visible light communications

    CERN Document Server

    Gutierrez, R M; Castaneda, L F; Castano, J F

    2015-01-01

    A Silicon Photomultiplier, SiPM, is a metasystem of Avalanche Photodiodes, APDs, which embedded in a specific purpose electronic, becomes a metadevice with unique and useful advanced functionalities to capture, transmit and analyze information with increased efficiency and security. The SiPM is a very small state of the art photo-detector with very high efficiency and sensitivity, with good response to controlled light pulses in the presence of background light without saturation. New results profit of such metadevice to propose a new receiver-emitter system useful for Visible Light Communication, VLC.

  17. Feasibility of In-Trap Conversion Electron Spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Weissman, L.; Ames, F.; Aysto, J.; Forstner, O. [CERN, EP-Division (Switzerland); Rinta-Antila, S. [University of Jyvaeskyla, Department of Physics (Finland); Schmidt, P. [J. Gutenberg-Universitaet Mainz, Institut fuer Physik (Germany)

    2001-01-15

    We have used REXTRAP at ISOLDE to test the feasibility of in-trap electron spectroscopy. The results of calculations, experiments with various electron sources as well as a first test with trapped radioactive ions are presented.

  18. Field electron emission from LaB{sub 6} and TiN emitter arrays fabricated by transfer mold technique

    Energy Technology Data Exchange (ETDEWEB)

    Nakamoto, Masayuki; Fukuda, Katsuyoshi

    2002-12-30

    LaB{sub 6} and TiN field emitter arrays (FEAs) have been developed by the transfer mold technique to fabricate sharp, uniform, and low operation voltage FEAs using low work function materials. Because of the sharpening effect on the tips by thermally oxidized SiO{sub 2} layer of the molds, emitter tip radii are as small as less than 10 nm. The turn-on voltages of LaB{sub 6} and TiN FEA are 110-130 V lower than that of conventional Mo FEA by decreasing the surface barrier heights for field emission, having the same emitter shape. That of the gated LaB{sub 6} FEA is as low as 28 V even without high vacuum baking treatment. Transfer mold technique provides easiness of selecting low work function materials as well as superior uniform sharpness of FEAs. Transfer mold LaB{sub 6} and TiN FEAs are useful for low operation vacuum microelectronic devices.

  19. Emittance investigation of RF photo-injector

    CERN Document Server

    Yang Mao Rong; Li Zheng; Li Ming; Xu Zhou

    2002-01-01

    A high-power laser beam illuminates a photocathode surface placed on an end wall of an RF cavity. The emitted electrons are accelerated immediately to a relativistic energy by the strong RF find in the cavity. But space charge effect induces beam emittance growth especially near the cathode where the electrons are still nonrelativistic. The author analyzes the factors which lead the transverse emittance growth and method how to resolve this problem. After introducing solenoidal focusing near the photocathode, the beam emittance growth is suppressed dramatically. The beam emittance is given also after compensation and simulation results. The measurements show these results are coincident

  20. Brownian Emitters

    Science.gov (United States)

    Tsekov, Roumen

    2016-06-01

    A Brownian harmonic oscillator, which dissipates energy either by friction or via emission of electromagnetic radiation, is considered. This Brownian emitter is driven by the surrounding thermo-quantum fluctuations, which are theoretically described by the fluctuation-dissipation theorem. It is shown how the Abraham-Lorentz force leads to dependence of the half-width on the peak frequency of the oscillator amplitude spectral density. It is found that for the case of a charged particle moving in vacuum at zero temperature, its root-mean-square velocity fluctuation is a universal constant, equal to roughly 1/18 of the speed of light. The relevant Fokker-Planck and Smoluchowski equations are also derived.

  1. The Internal Conversion Electron and Gamma Spectroscopy in the 14N + 197Au Reaction Measurements

    Science.gov (United States)

    KrXf3l, A.; Andrzejewski, J.; Perkowski, J.; Sobczak, K.; Kisielinski, M.; Kowalczyk, M.; Kownacki, J.; Korman, A.

    2008-02-01

    The first ``in-beam'' spectra of the internal conversion electrons were collected in the 197Au(14N,5n)206Rn fusion evaporation reaction by new constructed electron spectrometer. The measurements were carried out in electron-gamma and gamma-gamma coincidence mode with use of electron spectrometer coupled to OSIRIS II gamma array at Heavy Ion Laboratory (HIL) of the Warsaw University. The analysis of the data for gamma -gamma coincidence measurement disclosed new transitions in 206Rn excited nucleus. Experimentally obtained internal conversion coefficient allowed to determine multipolarity of the new observed transition in 206Rn nucleus.

  2. The future of electronic power processing and conversion

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Consoli, A.; Ferreira, J.A.

    2005-01-01

    . - A large penetration of power electronics into power systems will happen within the next 25-30 years. The main transmission grid will not be affected. The power electronics development will be in distributed generation and in the loads. - The success of the integrated starter/generator, hybrid or electric...... cars depends on political decisions more than on technological advances. However, the success of a recent Japanese hybrid car and the cost of oil could trigger the critical momentum for large-scale use of power electronics in automotive applications. - We are moving toward standardized power supply...

  3. The future of electronic power processing and conversion

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Consoli, A.; Ferreira, J.A.

    2005-01-01

    building blocks for computers and other applications. The main push is for lower cost, and production technology becomes the important issue. - Demands for improved performance in a diversity of applications will stimulate R&D in power electronics in future. Intelligent control and energy management......At a workshop held on the Aeolian Islands in Sicily during May 2004 a group of academic and industry engineers from all over the world discussed the medium-and long-term future of power electronics and its applications in specific areas. The following main issues were identified and discussed....... - The demand is not for power electronic solutions but for system integration of electronic power processing. A more multidisciplinary approach is needed. - We will witness a proliferation of energy storage in systems. The technology is in place and the improvement in system performance makes it worthwhile...

  4. Ion sources with arc-discharge plasma box driven by directly heated LaB(6) electron emitter or cold cathode.

    Science.gov (United States)

    Ivanov, Alexander A; Davydenko, Vladimir I; Deichuli, Petr P; Shulzhenko, Grigori I; Stupishin, Nikolay V

    2008-02-01

    In the Budker Institute, Novosibirsk, an ion source with arc-discharge plasma box has been developed in the recent years for application in thermonuclear devices for plasma diagnostics. Several modifications of the ion source were provided with extracted current ranging from 1 to 7 A and pulse duration of up to 4 s. Initially, the arc-discharge plasma box with cold cathode was used, with which pulse duration is limited to 2 s by the cathode overheating and sputtering in local arc spots. Recently, a directly heated LaB(6) electron emitter was employed instead, which has extended lifetime compared to the cold cathode. In the paper, characteristics of the beam produced with both arrangements of the plasma box are presented.

  5. Emittance growth due to the wake field driven by an electron beam accelerated in an RF-gun of free electron laser 'ELSA'

    CERN Document Server

    Salah, W

    2000-01-01

    It appears that the ease of the parameter chosen for 'ELSA' photo injector, the influence of the exit aperture, in terms of beam quality, is slight concerning the transverse emittance: (DELTA epsilon sub p sub e sub r sub p sub e sub n sub d sub i sub c sub u sub l sub a sub r /epsilon sub p sub e sub r sub p sub e sub n sub d sub i sub c sub u sub l sub a sub = = r)(z)approx 3% at maximum, and negligible concerning the axial emittance. To complete this paper, we recall the results previously obtained concerning the wake field of a closed or open cavity for a beam approaching the anode . They had quantitatively specified the expected deep asymmetry between the conducting walls regarding their contribution to the total wake field, besides the space-charge contribution. (Given that the radial walls have no time to contribute, these conducting walls are the cathode and the anode.) Thus, concerning the effects on whole-beam emittances, the correction (DELTA epsilon sub p sub e sub r sub p sub e sub n sub d sub i ...

  6. The principles of electronic and electromechanic power conversion a systems approach

    CERN Document Server

    Ferreira, Braham

    2013-01-01

    Teaching the principles of power electronics and electromechanical power conversion through a unique top down systems approach, The Principles of Electromechanical Power Conversion takes the role and system context of power conversion functions as the starting point. Following this approach, the text defines the building blocks of the system and describes the theory of how they exchange power with each other. The authors introduce a modern, simple approach to machines, which makes the principles of field oriented control and space vector theory approachable to undergraduate students as well as

  7. Emittance Theory for Thin Film Selective Emitter

    Science.gov (United States)

    Chubb, Donald L.; Lowe, Roland A.; Good, Brian S.

    1994-01-01

    Thin films of high temperature garnet materials such as yttrium aluminum garnet (YAG) doped with rare earths are currently being investigated as selective emitters. This paper presents a radiative transfer analysis of the thin film emitter. From this analysis the emitter efficiency and power density are calculated. Results based on measured extinction coefficients for erbium-YAG and holmium-YAG are presented. These results indicated that emitter efficiencies of 50 percent and power densities of several watts/sq cm are attainable at moderate temperatures (less than 1750 K).

  8. Thermophotovoltaic emitter material selection and design

    Energy Technology Data Exchange (ETDEWEB)

    Saxton, P.C.; Moran, A.L.; Harper, M.J.; Lindler, K.W. [Naval Academy, Annapolis, MD (United States)

    1997-07-01

    Thermophotovoltaics (TPV) is a potentially attractive direct energy conversion technology. It reduces the need for complex machinery with moving parts and maintenance. TPV generators can be run from a variety of heat sources including waste heat for smaller scale operations. The US Naval Academy`s goal was to build a small experimental thermophotovoltaic generator powered by combustion gases from a General Electric T-58 helicopter gas turbine. The design of the generator imposes material limitations that directly affect emitter and structural materials selection. This paper details emitter material goals and requirements, and the methods used to select suitable candidate emitter materials for further testing.

  9. Ultrathin MoS2 and WS2 layers on silver nano-tips as electron emitters

    Science.gov (United States)

    Loh, Tamie A. J.; Tanemura, Masaki; Chua, Daniel H. C.

    2016-09-01

    2-dimensional (2D) inorganic analogues of graphene such as MoS2 and WS2 present interesting opportunities for field emission technology due to their high aspect ratio and good electrical conductivity. However, research on 2D MoS2 and WS2 as potential field emitters remains largely undeveloped compared to graphene. Herein, we present an approach to directly fabricate ultrathin MoS2 and WS2 onto Ag nano-tips using pulsed laser deposition at low temperatures of 450-500 °C. In addition to providing a layer of chemical and mechanical protection for the Ag nano-tips, the growth of ultrathin MoS2 and WS2 layers on Ag led to enhanced emission properties over that of pristine nano-tips due to a reduction of the effective barrier height arising from charge injection from Ag to the overlying MoS2 or WS2. For WS2 on Ag nano-tips, the phasic mixture was also an important factor influencing the field emission performance. The presence of 1T-WS2 at the metal-WS2 interface in a hybrid film of 2H/1T-WS2 leads to improvement in the field emission capabilities as compared to pure 2H-WS2 on Ag nano-tips.

  10. Measurement of γ and conversion electron spectra following the decay of 125Sb

    Science.gov (United States)

    Sainath, M.; Venkataramaniah, K.; Sood, P. C.

    1998-12-01

    Relative intensities of γ rays and conversion electron lines in the decay of 125Sb are measured precisely using an HPGe detector and a miniorange electron spectrometer. These data are used to derive the K- and L-shell internal conversion coefficients and to deduce the multipolarities of the respective transitions. A revised level scheme is presented for 125Te incorporating 37 transitions between 13 energy levels up to an excitation energy of 675 keV. The newly established levels at 538 and 653 keV complete the hextuplet corresponding to the (s1/2⊗2+) and (d3/2⊗2+) phonon-coupled configurations.

  11. Muon to electron conversion: The COMET and Mu2e experiments

    CERN Document Server

    Litchfield, R P

    2014-01-01

    I describe the new generation of muon-to-electron conversion experiments, COMET and Mu2e, being constructed to make use of new high power pulsed muon beams a J-PARC and Fermilab respectively. A brief overview of the physics explored by the muon to electron conversion is given, followed by a description of the experimental challenges and resulting features common to the new experiments. The differences in approach between Mu2e and COMET are then highlighted, and the current schedules given.

  12. Direct first-principles simulation of a high-performance electron emitter: Lithium-oxide-coated diamond surface

    Energy Technology Data Exchange (ETDEWEB)

    Miyamoto, Yoshiyuki, E-mail: yoshi-miyamoto@aist.go.jp; Miyazaki, Takehide [Nanosystem Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), Central 2, 1-1-1 Umezono, Tsukuba, Ibaraki 305-8568 (Japan); Takeuchi, Daisuke; Yamasaki, Satoshi [Energy Technology Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), Central 2, 1-1-1 Umezono, Tsukuba, Ibaraki 305-8568 (Japan); JST, ALCA, 4-1-8 Honcho, Kawaguchi, Saitama 332-0012 (Japan)

    2014-09-28

    We examined the field emission properties of lithium(Li)/oxygen(O)-co-terminated diamond (001) surface [C(001)-LiO] through real-time electron dynamics simulation under an applied field. The current emitted from this surface was found to be more than four-fold that emitted by an H-terminated (001) surface, the latter being a typical negative electron affinity system. This high performance is attributed to the Li layer, which bends the potential wall of O-induced electron pockets down in the direction of vacuum, thus facilitating electron emission. Detailed analysis of the emitted electrons and the profile of the self-consistent potential elucidated that the role of O atoms changes from an electron barrier on OH-terminated diamond surfaces to an outlet for electron emission on C(001)-LiO.

  13. Simulation of measuring emittance of the laser wakefield accelerated electrons with multi-slit method%多狭缝法测量激光尾场电子束发射度的模拟研究

    Institute of Scientific and Technical Information of China (English)

    陈佳; 吴玉迟; 董克攻; 谷渝秋

    2016-01-01

    发射度是描述束流品质的重要物理量,根据发射度和传输矩阵可以准确计算束流包络和发散角的变化。在考察传统加速器束流发射度测量方法的基础上,提出采用多狭缝法对激光尾场产生的电子束发射度进行测量。采用宽度为20μm 的多狭缝板对发射度为0.05 mm·mrad 的激光尾场加速电子发射度进行测量,数值模拟结果表明采用多狭缝法测量的相对误差可以控制在5%以内。并给出了不同狭缝参数对测量精度的影响,模拟结果表明狭缝宽度对发射度测量精度影响最大。狭缝宽度越窄,测量精度越高,反之,则越低。%Emittance is one of the most important parameters for electron beams.Based on the emittance and transfer mar-trix,beam envelope and angular divergence can be precisely calculated.Considering the limitation of traditional emittance meas-urement methods,we employed the multi-slit method to measure the emittance of the laser wakefield accelerated electron beams. In our simulation,the slit width was set as 20 μm,the emittance was 0.05 mm·mrad.We have achieved a good consistence with 5% relative error between the measured emittance and the given emittance.We also observed the effect of different parameters on the precisions of measured emittance.It is concluded that the slit width is the most important parameter,the emittance measure-ment is more accurate with the narrower slit width.

  14. Conversion electron spectrometry of Pu isotopes with a silicon drift detector.

    Science.gov (United States)

    Pommé, S; Paepen, J; Peräjärvi, K; Turunen, J; Pöllänen, R

    2016-03-01

    An electron spectrometry set-up was built at IRMM consisting of a vacuum chamber with a moveable source holder and windowless Peltier-cooled silicon drift detector (SDD). The SDD is well suited for measuring low-energy x rays and electrons emitted from thin radioactive sources with low self-absorption. The attainable energy resolution is better than 0.5keV for electrons of 30keV. It has been used to measure the conversion electron spectra of three plutonium isotopes, i.e. (238)Pu, (239)Pu, (240)Pu, as well as (241)Am (being a decay product of (241)Pu). The obtained mixed x-ray and electron spectra are compared with spectra obtained with a close-geometry set-up using another SDD in STUK and spectra measured with a Si(Li) detector at IRMM. The potential of conversion electron spectrometry for isotopic analysis of mixed plutonium samples is investigated. With respect to the (240)Pu/(239)Pu isotopic ratio, the conversion electron peaks of both isotopes are more clearly separated than their largely overlapping peaks in alpha spectra.

  15. Aberration Corrected Emittance Exchange

    CERN Document Server

    Nanni, Emilio A

    2015-01-01

    Full exploitation of emittance exchange (EEX) requires aberration-free performance of a complex imaging system including active radio-frequency (RF) elements which can add temporal distortions. We investigate the performance of an EEX line where the exchange occurs between two dimensions with normalized emittances which differ by orders of magnitude. The transverse emittance is exchanged into the longitudinal dimension using a double dog-leg emittance exchange setup with a 5 cell RF deflector cavity. Aberration correction is performed on the four most dominant aberrations. These include temporal aberrations that are corrected with higher order magnetic optical elements located where longitudinal and transverse emittance are coupled. We demonstrate aberration-free performance of emittances differing by 4 orders of magnitude, i.e. an initial transverse emittance of $\\epsilon_x=1$ pm-rad is exchanged with a longitudinal emittance of $\\epsilon_z=10$ nm-rad.

  16. Resonant Spin-Flavor Conversion of Supernova Neutrinos: Dependence on Electron Mole Fraction

    CERN Document Server

    Yoshida, T; Kimura, K; Yokomakura, H; Kawagoe, S; Kajino, T

    2009-01-01

    Detailed dependence of resonant spin-flavor (RSF) conversion of supernova neutrinos on electron mole fraction Ye is investigated. Supernova explosion forms a hot-bubble and neutrino-driven wind region of which electron mole fraction exceeds 0.5 in several seconds after the core collapse. When a higher resonance of the RSF conversion is located in the innermost region, flavor change of the neutrinos strongly depends on the sign of 1-2Ye. At an adiabatic high RSF resonance the flavor conversion of bar{nu}_e -> nu_{mu,tau} occurs in Ye 0.5 and inverted mass hierarchy. In other cases of Ye values and mass hierarchies, the conversion of nu_e -> bar{nu}_{mu,tau} occurs. The final bar{nu}_e spectrum is evaluated in the cases of Ye 0.5 taking account of the RSF conversion. Based on the obtained result, time variation of the event number ratios of low bar{nu}_e energy to high bar{nu}_e energy is discussed. In normal mass hierarchy, an enhancement of the event ratio should be seen in the period when the electron frac...

  17. Dose conversion coefficients for high-energy photons, electrons, neutrons and protons

    CERN Document Server

    Sakamoto, Y; Sato, O; Tanaka, S I; Tsuda, S; Yamaguchi, Y; Yoshizawa, N

    2003-01-01

    In the International Commission on Radiological Protection (ICRP) 1990 Recommendations, radiation weighting factors were introduced in the place of quality factors, the tissue weighting factors were revised, and effective doses and equivalent doses of each tissues and organs were defined as the protection quantities. Dose conversion coefficients for photons, electrons and neutrons based on new ICRP recommendations were cited in the ICRP Publication 74, but the energy ranges of theses data were limited and there are no data for high energy radiations produced in accelerator facilities. For the purpose of designing the high intensity proton accelerator facilities at JAERI, the dose evaluation code system of high energy radiations based on the HERMES code was developed and the dose conversion coefficients of effective dose were evaluated for photons, neutrons and protons up to 10 GeV, and electrons up to 100 GeV. The dose conversion coefficients of effective dose equivalent were also evaluated using quality fact...

  18. Simulation and experimental results for the detection of conversion electrons with gas proportional scintillation counters

    CERN Document Server

    Rachinhas, P J B M; Lopes, J A M; Dias, T; Morgado, R E; Santos, J M; Stauffer, A D; Conde, C A N

    2000-01-01

    The application of gas proportional scintillation counters (GPSC) to the detection and identification of conversion electrons in the medium energy range is investigated. Experimental and Monte Carlo results are presented for the response of a xenon GPSC, filled at atmospheric pressure, to the decay of a sup 1 sup 0 sup 9 Cd source. This source emits 88.0 keV gamma-rays, e sub L =84.6 keV and e sub K =62.5 keV conversion electrons, as well as fluorescence X-rays and Auger electrons. Good agreement is found between the measured and the calculated energy spectra. The response to higher-energy electrons is investigated by Monte Carlo simulation, by considering a hypothetical GPSC filled with xenon at 10 atm and doped with the sup 1 sup 3 sup 3 sup m Xe metastable isotope. The calculated energy spectra for the absorption of the sup 1 sup 3 sup 3 sup m Xe 233.2 keV gamma-rays, e sub K =198.6 keV and e sub L =228.4 keV conversion electrons, as well as fluorescence X-rays and Auger electrons, are presented and discus...

  19. Localized bulk electron heating with ICRF mode conversion in the JET tokamak

    DEFF Research Database (Denmark)

    Mantsinen, M.J.; Mayoral, M.-L.; Eester, D. Van

    2004-01-01

    Ion cyclotron resonance frequencies (ICRF) mode conversion has been developed for localized on-axis and off-axis bulk electron heating on the JET tokamak. The fast magnetosonic waves launched from the low-field side ICRF antennas are mode-converted to short-wavelength waves on the high-field side...

  20. Hot-electron-based solar energy conversion with metal-semiconductor nanodiodes.

    Science.gov (United States)

    Lee, Young Keun; Lee, Hyosun; Lee, Changhwan; Hwang, Euyheon; Park, Jeong Young

    2016-06-29

    Energy dissipation at metal surfaces or interfaces between a metal and a dielectric generally results from elementary excitations, including phonons and electronic excitation, once external energy is deposited to the surface/interface during exothermic chemical processes or an electromagnetic wave incident. In this paper, we outline recent research activities to develop energy conversion devices based on hot electrons. We found that photon energy can be directly converted to hot electrons and that hot electrons flow through the interface of metal-semiconductor nanodiodes where a Schottky barrier is formed and the energy barrier is much lower than the work function of the metal. The detection of hot electron flow can be successfully measured using the photocurrent; we measured the photoyield of photoemission with incident photons-to-current conversion efficiency (IPCE). We also show that surface plasmons (i.e. the collective oscillation of conduction band electrons induced by interaction with an electromagnetic field) are excited on a rough metal surface and subsequently decay into secondary electrons, which gives rise to enhancement of the IPCE. Furthermore, the unique optical behavior of surface plasmons can be coupled with dye molecules, suggesting the possibility for producing additional channels for hot electron generation.

  1. Low Emittance X-FEL Development

    CERN Document Server

    Li, K S B; Anghel, A; Bakker, R J; Böge, M; Candel, A E; Dehler, M; Ganter, R; Gough, C; Ingold, G; Leemann, S C; Pedrozzi, M; Raguin, J Y; Rivkin, L; Schlott, V; Streun, A; Wrulich, A F

    2005-01-01

    The Paul Scherrer Institute (PSI) in Switzerland currently develops a Low-Emittance electron-Gun (LEG) based on field-emitter technology [1]. The target is a normalized transverse emittance of 5 10(-8) m rad or less. Such a source is particularly interesting for FELs that target wavelengths below 0.3 nm since it permits a reduction of the required beam-energy and hence, a reduction of the construction- and operational costs of X-ray FELs. That is, for the case that this initial low emittance can be maintained throughout the accelerator. Here we present a concept for a 0.1 nm X-FEL based on LEG, which can be located close to the Swiss Light Source (SLS). Special attention goes to the maintenance of the emittance during the process of acceleration and bunch-compression, in particular in the regimes where either space-charge forces or coherent-synchrotron radiation are of importance.

  2. CESR Conversion Damping Ring Studies of Electron Cloud Instabilities (CESR-TA)

    Energy Technology Data Exchange (ETDEWEB)

    Rubin, David L.; Palmer, Mark A.

    2011-08-02

    In the International Linear Collider, two linear accelerators will accelerate bunches of positrons and electrons to over a hundred billion electron volts and collide them in a central detector. In order to obtain useful collision rates, the bunches, each containing twenty billion particles, must be compressed to a cross section of a few nanometers by a few hundred nanometers. In order to prepare these ultra high density bunches, damping rings (DRs) are employed before the linear accelerators. The DRs take the high emittance bunches that are provided by the electron and positron sources and, through the process of radiation damping, squeeze them into ultra low emittance beams that are ready for the main linear accelerators. In the damping rings, a number of effects can prevent the successful preparation of the beams. In the electron ring, an effect known as the fast ion instability can lead to beam growth and, in the positron ring, the build-up of an electron cloud (EC), which interacts with the circulating bunches, can produce the same effect. EC build-up and the subsequent interaction of the cloud with the positron beam in the DR have been identified as major risks for the successful construction of a linear collider. The CESRTA research program at the Cornell Electron Storage Ring (CESR) was developed in order to study the build-up of the EC, the details of its impact on ultra low emittance beams, as well as methods to mitigate the impact of the cloud. In the DR, the EC forms when synchrotron photons radiated from the circulating beam strike the walls of the vacuum chamber, resulting in the emission of photoelectrons. These low energy electrons can be accelerated across the vacuum chamber by the electric field of the beam, and strike the walls, causing the emission of secondary electrons. The secondary electrons are subsequently accelerated into the walls yet again via the same mechanism. The result is that the EC can rapidly begin to fill the vacuum chamber. In

  3. Doubly stochastic Poisson processes in EMARG with detection of. beta. particles and internal-conversion electrons emitted from a surface

    Energy Technology Data Exchange (ETDEWEB)

    Rusov, V.D.; Zelentsova, T.N.; Grechan, V.I.; Semenov, M.Y.; Kravchenko, S.N.

    1985-12-01

    The form of the counting statistics is determined for detection of ..beta.. particles and internal-conversion electrons by a nuclear emulsion. It is shown experimentally for the first time that photographic detection of ..beta.. particles and internal-conversion electrons obeys a Neyman type-A distribution, and not a Poisson distribution as was previously assumed.

  4. Low emittance electron beam generation from a laser wakefield accelerator using two laser pulses with different wavelengths

    CERN Document Server

    Xu, X L; Zhang, C J; Li, F; Wan, Y; Hua, J F; Pai, C -H; Lu, W; Yu, P; Joshi, C; Mori, W B

    2014-01-01

    Ionization injection triggered by short wavelength laser pulses inside a nonlinear wakefield driven by a longer wavelength laser is examined via multi-dimensional particle-in-cell simulations. We find that very bright electron beams can be generated through this two-color scheme in either collinear propagating or transverse colliding geometry. For a fixed laser intensity $I$, lasers with longer/shorter wavelength $\\lambda$ have larger/smaller ponderomotive potential ($\\propto I \\lambda^2$). The two color scheme utilizes this property to separate the injection process from the wakefield excitation process. Very strong wakes can be generated at relatively low laser intensities by using a longer wavelength laser driver (e.g. a $10 \\micro\\meter$ CO$_2$ laser) due to its very large ponderomotive potential. On the other hand, short wavelength laser can produce electrons with very small residual momenta ($p_\\perp\\sim a_0\\sim \\sqrt{I}\\lambda$) inside the wake, leading to electron beams with very small normalized emit...

  5. Direct measurement of electron beam quality conversion factors using water calorimetry.

    Science.gov (United States)

    Renaud, James; Sarfehnia, Arman; Marchant, Kristin; McEwen, Malcolm; Ross, Carl; Seuntjens, Jan

    2015-11-01

    In this work, the authors describe an electron sealed water calorimeter (ESWcal) designed to directly measure absorbed dose to water in clinical electron beams and its use to derive electron beam quality conversion factors for two ionization chamber types. A functioning calorimeter prototype was constructed in-house and used to obtain reproducible measurements in clinical accelerator-based 6, 9, 12, 16, and 20 MeV electron beams. Corrections for the radiation field perturbation due to the presence of the glass calorimeter vessel were calculated using Monte Carlo (MC) simulations. The conductive heat transfer due to dose gradients and nonwater materials was also accounted for using a commercial finite element method software package. The relative combined standard uncertainty on the ESWcal dose was estimated to be 0.50% for the 9-20 MeV beams and 1.00% for the 6 MeV beam, demonstrating that the development of a water calorimeter-based standard for electron beams over such a wide range of clinically relevant energies is feasible. The largest contributor to the uncertainty was the positioning (Type A, 0.10%-0.40%) and its influence on the perturbation correction (Type B, 0.10%-0.60%). As a preliminary validation, measurements performed with the ESWcal in a 6 MV photon beam were directly compared to results derived from the National Research Council of Canada (NRC) photon beam standard water calorimeter. These two independent devices were shown to agree well within the 0.43% combined relative uncertainty of the ESWcal for this beam type and quality. Absorbed dose electron beam quality conversion factors were measured using the ESWcal for the Exradin A12 and PTW Roos ionization chambers. The photon-electron conversion factor, kecal, for the A12 was also experimentally determined. Nonstatistically significant differences of up to 0.7% were found when compared to the calculation-based factors listed in the AAPM's TG-51 protocol. General agreement between the relative

  6. Direct measurement of electron beam quality conversion factors using water calorimetry

    Energy Technology Data Exchange (ETDEWEB)

    Renaud, James, E-mail: james.renaud@mail.mcgill.ca; Seuntjens, Jan [Medical Physics Unit, McGill University, Montréal, Québec H3G 1A4 (Canada); Sarfehnia, Arman [Medical Physics Unit, McGill University, Montréal, Québec H3G 1A4, Canada and Department of Radiation Oncology, University of Toronto, Toronto, Ontario M5S 3E2 (Canada); Marchant, Kristin [Allan Blair Cancer Centre, Saskatchewan Cancer Agency, Regina, Saskatchewan S4T 7T1, Canada and Department of Oncology, University of Saskatchewan, Saskatoon, Saskatchewan S7N 5A1 (Canada); McEwen, Malcolm; Ross, Carl [Ionizing Radiation Standards, National Research Council of Canada, Ottawa, Ontario K1A 0R6 (Canada)

    2015-11-15

    Purpose: In this work, the authors describe an electron sealed water calorimeter (ESWcal) designed to directly measure absorbed dose to water in clinical electron beams and its use to derive electron beam quality conversion factors for two ionization chamber types. Methods: A functioning calorimeter prototype was constructed in-house and used to obtain reproducible measurements in clinical accelerator-based 6, 9, 12, 16, and 20 MeV electron beams. Corrections for the radiation field perturbation due to the presence of the glass calorimeter vessel were calculated using Monte Carlo (MC) simulations. The conductive heat transfer due to dose gradients and nonwater materials was also accounted for using a commercial finite element method software package. Results: The relative combined standard uncertainty on the ESWcal dose was estimated to be 0.50% for the 9–20 MeV beams and 1.00% for the 6 MeV beam, demonstrating that the development of a water calorimeter-based standard for electron beams over such a wide range of clinically relevant energies is feasible. The largest contributor to the uncertainty was the positioning (Type A, 0.10%–0.40%) and its influence on the perturbation correction (Type B, 0.10%–0.60%). As a preliminary validation, measurements performed with the ESWcal in a 6 MV photon beam were directly compared to results derived from the National Research Council of Canada (NRC) photon beam standard water calorimeter. These two independent devices were shown to agree well within the 0.43% combined relative uncertainty of the ESWcal for this beam type and quality. Absorbed dose electron beam quality conversion factors were measured using the ESWcal for the Exradin A12 and PTW Roos ionization chambers. The photon-electron conversion factor, k{sub ecal}, for the A12 was also experimentally determined. Nonstatistically significant differences of up to 0.7% were found when compared to the calculation-based factors listed in the AAPM’s TG-51 protocol

  7. Conversion electron study of {sup 110}Cd: Evidence of new E0 branches

    Energy Technology Data Exchange (ETDEWEB)

    Jigmeddorj, B.; Garrett, P.E.; Diaz Varela, A.; Bangay, J.C.; Demand, G.A.; Green, K.L.; Rand, E.T.; Sumithrarachchi, C.; Svensson, C.E.; Wong, J. [University of Guelph, Department of Physics, Guelph, ON (Canada); Ball, G.C.; Garnsworthy, A.B.; Hackman, G. [TRIUMF, Vancouver, BC (Canada); Cross, D.S. [Simon Fraser University, Department of Chemistry, Burnaby, BC (Canada); Kulp, W.D.; Wood, J.L. [Georgia Institute of Technology, School of Physics, Atlanta, GA (United States); Leach, K.G. [University of Guelph, Department of Physics, Guelph, ON (Canada); TRIUMF, Vancouver, BC (Canada); Orce, J.N. [TRIUMF, Vancouver, BC (Canada); University of the Western Cape, Department of Physics, Bellville (South Africa); Triambak, S. [TRIUMF, Vancouver, BC (Canada); University of the Western Cape, Department of Physics, Bellville (South Africa); iThemba LABS, Somerset West (South Africa); Yates, S.W. [University of Kentucky, Departments of Chemistry and Physics and Astronomy, Lexington, KY (United States)

    2016-02-15

    Excited states of {sup 110}Cd were studied with conversion electron spectroscopy following the β{sup +}/EC decay of {sup 110}In. Internal conversion coefficients from K-shell electrons are extracted from γ - e{sup -} coincidences and compared with expected values for E1, M1, and E2 transitions, allowing the assignment of the transition multipolarities. The α{sub K} values for transitions connecting the 4{sup +} and 6{sup +} members of the deformed intruder band and the ground-state band show evidence for E0 components. The extracted ρ{sup 2}(E0).10{sup 3} value for the 4{sup +}{sub 3}→4{sup +}{sub 1} 708 keV transition is determined to be 106{sup +98}{sub -91}. (orig.)

  8. A Direct Power Electronic Conversion Topology for Multi-Drive Applications

    DEFF Research Database (Denmark)

    Klumpner, Christian; Blaabjerg, Frede

    2002-01-01

    In this paper, a two-stage converter topology consisting of a three-phase to two-phase matrix converter directly linked to a Voltage Source Inverter (VSI) that provides Direct Power Electronic Conversion (DPEC) is analysed. A new topology for multi-drive applications is proposed where several VSI...... stages are directly linked to a rectification stage without using DC-link capacitors, providing similar performance as a matrix converter: sinusoidal input currents and bi-directional power flow....

  9. A Palladium-Binding Deltarhodopsin for Light-Activated Conversion of Protonic to Electronic Currents.

    Science.gov (United States)

    Soto-Rodríguez, Jessica; Hemmatian, Zahra; Josberger, Erik E; Rolandi, Marco; Baneyx, François

    2016-08-01

    Fusion of a palladium-binding peptide to an archaeal rhodopsin promotes intimate integration of the lipid-embedded membrane protein with a palladium hydride protonic contact. Devices fabricated with the palladium-binding deltarhodopsin enable light-activated conversion of protonic currents to electronic currents with on/off responses complete in seconds and a nearly tenfold increase in electrical signal relative to those made with the wild-type protein.

  10. Preparation of {sup 114m}In low energy conversion electron sources

    Energy Technology Data Exchange (ETDEWEB)

    Wrede, C., E-mail: wrede@uw.ed [Center for Experimental Nuclear Physics and Astrophysics, and Department of Physics, University of Washington, Seattle, WA 98195 (United States); Filippone, B.W. [Kellogg Radiation Laboratory, California Institute of Technology, Pasadena, California 91125 (United States); Garcia, A.; Harper, G.C. [Center for Experimental Nuclear Physics and Astrophysics, and Department of Physics, University of Washington, Seattle, WA 98195 (United States); Lassell, S. [Department of Nuclear Engineering, North Carolina State University, Raleigh, North Carolina 27695 (United States); Liu, J. [Kellogg Radiation Laboratory, California Institute of Technology, Pasadena, California 91125 (United States); Department of Physics, Shanghai Jiao Tong University, Shanghai 200240 (China); Mendenhall, M.P. [Kellogg Radiation Laboratory, California Institute of Technology, Pasadena, California 91125 (United States); Palmer, A.S.C. [Center for Experimental Nuclear Physics and Astrophysics, and Department of Physics, University of Washington, Seattle, WA 98195 (United States); Pattie, R.W. [Department of Physics, North Carolina State University, Raleigh, North Carolina 27695 (United States); Will, D.I. [Center for Experimental Nuclear Physics and Astrophysics, and Department of Physics, University of Washington, Seattle, WA 98195 (United States); Young, A.R. [Department of Physics, North Carolina State University, Raleigh, North Carolina 27695 (United States)

    2011-05-15

    Highlights: {yields} Controlled ion implantation of In-113 into thin Al substrate. {yields} Production of In-114m (half life = 50 days) by neutron irradiation. {yields} Use of In-114m as a source of electron lines and continuum for calibrations. {yields} Source reactivation by short neutron irradiation. -- Abstract: The preparation of {sup 114m}In sources of conversion electrons in the energy range 162-190 keV and {beta} continuum with a 1989 keV endpoint via ion implantation of {sup 113}In into Al substrates and subsequent irradiation by thermal and epi-thermal neutrons in a nuclear reactor is described.

  11. Combined in-beam gamma-ray and conversion electron spectroscopy with radioactive ion beams

    Directory of Open Access Journals (Sweden)

    Konki J.

    2013-12-01

    Full Text Available In-beam gamma-ray and electron spectroscopy have been widely used as tools to study the broad variety of phenomena in nuclear structure. The SPEDE spectrometer is a new device to be used in conjunction with the MINIBALL germanium detector array to enable the detection of internal conversion electrons in coincidence with gamma rays from de-exciting nuclei in radioactive ion beam experiments at the upcoming HIE-ISOLDE facility at CERN, Switzerland. Geant4 simulations were carried out in order to optimise the design and segmentation of the silicon detector to achieve good energy resolution and performance.

  12. Energy Conversion Mechanism for Electron Perpendicular Energy in High Guide-Field Reconnection

    Science.gov (United States)

    Guo, Xuehan; Horiuchi, Ritoku; Kaminou, Yasuhiro; Cheng, Frank; Ono, Yasushi

    2016-10-01

    The energy conversion mechanism for electron perpendicular energy, both the thermal and the kinetic energy, is investigated by means of two-dimensional, full-particle simulations in an open system. It is shown that electron perpendicular heating is mainly due to the breaking of magnetic moment conservation in separatrix region because the charge separation generates intense variation of electric field within the electron Larmor radius. Meanwhile, electron perpendicular acceleration takes place manly due to the polarization drift term as well as the curvature drift term of E . u⊥ in the downstream near the X-point. The enhanced electric field due to the charge separation there results in a significant effect of the polarization drift term on the dissipation of magnetic energy within the ion inertia length in the downstream. Japan Society for the Promotion of Science (JSPS) Fellows 15J03758.

  13. Efficient low-temperature thermophotovoltaic emitters from metallic photonic crystals.

    Science.gov (United States)

    Nagpal, Prashant; Han, Sang Eon; Stein, Andreas; Norris, David J

    2008-10-01

    We examine the use of metallic photonic crystals as thermophotovoltaic emitters. We coat silica woodpile structures, created using direct laser writing, with tungsten or molybdenum. Optical reflectivity and thermal emission measurements near 650 degrees C demonstrate that the resulting structures should provide efficient emitters at relatively low temperatures. When matched to InGaAsSb photocells, our structures should generate over ten times more power than solid emitters while having an optical-to-electrical conversion efficiency above 32%. At such low temperatures, these emitters have promise not only in solar energy but also in harnessing geothermal and industrial waste heat.

  14. Emittance Growth in Linear Induction Accelerators

    OpenAIRE

    Ekdahl, Carl

    2017-01-01

    The Dual-Axis Radiographic Hydrotest (DARHT) facility uses bremsstrahlung radiation source spots produced by the focused electron beams from two linear induction accelerators (LIAs) to radiograph large hydrodynamic experiments driven by high explosives. Radiographic resolution is determined by the size of the source spot, and beam emittance is the ultimate limitation to spot size. Some of the possible causes for the emittance growth in the DARHT LIA have been investigated using particle-in-ce...

  15. Measurement of transverse emittance and coherence of double-gate field emitter array cathodes

    Science.gov (United States)

    Tsujino, Soichiro; Das Kanungo, Prat; Monshipouri, Mahta; Lee, Chiwon; Miller, R. J. Dwayne

    2016-12-01

    Achieving small transverse beam emittance is important for high brightness cathodes for free electron lasers and electron diffraction and imaging experiments. Double-gate field emitter arrays with on-chip focussing electrode, operating with electrical switching or near infrared laser excitation, have been studied as cathodes that are competitive with photocathodes excited by ultraviolet lasers, but the experimental demonstration of the low emittance has been elusive. Here we demonstrate this for a field emitter array with an optimized double-gate structure by directly measuring the beam characteristics. Further we show the successful application of the double-gate field emitter array to observe the low-energy electron beam diffraction from suspended graphene in minimal setup. The observed low emittance and long coherence length are in good agreement with theory. These results demonstrate that our all-metal double-gate field emitters are highly promising for applications that demand extremely low-electron bunch-phase space volume and large transverse coherence.

  16. Evaluation of new iodinated acridine derivatives for targeted radionuclide therapy of melanoma using 125I, an Auger electron emitter.

    Science.gov (United States)

    Gardette, Maryline; Papon, Janine; Bonnet, Mathilde; Desbois, Nicolas; Labarre, Pierre; Wu, Ting-Dee; Miot-Noirault, Elisabeth; Madelmont, Jean-Claude; Guerquin-Kern, Jean-Luc; Chezal, Jean-Michel; Moins, Nicole

    2011-12-01

    The increasing incidence of melanoma and the lack of effective therapy on the disseminated form have led to an urgent need for new specific therapies. Several iodobenzamides or analogs are known to possess specific affinity for melanoma tissue. New heteroaromatic derivatives have been designed with a cytotoxic moiety and termed DNA intercalating agents. These compounds could be applied in targeted radionuclide therapy using (125)I, which emits Auger electrons and gives high-energy, localized irradiation. Two iodinated acridine derivatives have been reported to present an in vivo kinetic profile conducive to application in targeted radionuclide therapy. The aim of the present study was to perform a preclinical evaluation of these compounds. The DNA intercalating property was confirmed for both compounds. After radiolabeling with (125)I, the two compounds induced in vitro a significant radiotoxicity to B16F0 melanoma cells. Nevertheless, the acridine compound appeared more radiotoxic than the acridone compound. While cellular uptake was similar for both compounds, SIMS analysis and in vitro protocol showed a stronger affinity for melanin with acridone derivative, which was able to induce a predominant scavenging process in the melanosome and restrict access to the nucleus. In conclusion, the acridine derivative with a higher nuclear localization appeared a better candidate for application in targeted radionuclide therapy using (125)I.

  17. Enhancement of electron emission and long-term stability of tip-type carbon nanotube field emitters via lithium coating

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jong-Pil [Health and Medical Equipment R and D Team, Samsung Electronics, Suwon, Gyeonggi-do 443-742 (Korea, Republic of); Chang, Han-Beet; Kim, Bu-Jong [Dept. of Electronic Systems Engineering, Hanyang University, Ansan, Gyeonggi-do 426-791 (Korea, Republic of); Park, Jin-Seok, E-mail: jinsp@hanyang.ac.kr [Dept. of Electronic Systems Engineering, Hanyang University, Ansan, Gyeonggi-do 426-791 (Korea, Republic of)

    2013-01-01

    Carbon nanotubes (CNTs) were deposited on conical tip-type substrates via electrophoresis and coated with lithium (Li) thin films with diverse thicknesses via electroplating. For the as-deposited (i.e., without Li coating) CNT, the turn-on (or triggering) electric field was 0.92 V/μm, and the emission current, which was generated at an applied field of 1.2 V/μm was 56 μA. In the case of the 4.7 nm-thick Li-coated CNT, the turn-on field decreased to 0.65 V/μm and the emission current at the same applied field increased more than ten times to 618 μA. The analysis based on the Kelvin probe measurement and Fowler–Nordheim theory indicated that the coating of Li caused a loss in the structural-aspect-ratio of the CNTs and it reduced their effective work functions from 5.36 eV to 4.90 eV, which led to a great improvement of their electron emission characteristics. The results obtained in this study also showed that the long-term emission stability could be enhanced by the coating of thin Li films on CNTs. - Highlights: ► CNTs are deposited via electrophoretic deposition (EPD). ► Thin films of Li are coated on CNTs via electroplating, without plasma damage. ► Li coating enhanced field emission properties and emission stability of CNTs. ► The effective work functions and field enhancement factors of CNTs are evaluated.

  18. Tunable Mixed Ionic/Electronic Conductivity and Permittivity of Graphene Oxide Paper for Electrochemical Energy Conversion.

    Science.gov (United States)

    Bayer, Thomas; Bishop, Sean R; Perry, Nicola H; Sasaki, Kazunari; Lyth, Stephen M

    2016-05-11

    Graphene oxide (GO) is a two-dimensional graphitic carbon material functionalized with oxygen-containing surface functional groups. The material is of interest in energy conversion, sensing, chemical processing, gas barrier, and electronics applications. Multilayer GO paper has recently been applied as a new proton conducting membrane in low temperature fuel cells. However, a detailed understanding of the electrical/dielectric properties, including separation of the ionic vs electronic contributions under relevant operating conditions, has so far been lacking. Here, the electrical conductivity and dielectric permittivity of GO paper are investigated in situ from 30 to 120 °C, and from 0 to 100% relative humidity (RH) using impedance spectroscopy. These are related to the water content, measured by thermogravimetric analysis. With the aid of electron blocking measurements, GO is demonstrated to be a mixed electronic-protonic conductor, and the ion transference number is derived for the first time. For RH > 40%, conductivity is dominated by proton transport (with a maximum of 0.5 mS/cm at 90 °C and 100% RH). For RH proton conducting electrolyte but also as a mixed conducting electrode material under appropriate conditions. Such materials are highly applicable in electrochemical energy conversion and storage devices such as fuel cells and electrolyzers.

  19. Conversion electrons used to monitor the energy scale of electron spectrometer near tritium endpoint - a simulation study

    CERN Document Server

    Rysavy, M

    2006-01-01

    Measurements of the endpoint region of the tritium beta-decay spectrum provides good possibility to determine neutrino mass. This, however, needs a perfect monitoring of the spectrometer energy scale. A parallel measurement of electron line of known energy - in particular the 83mKr conversion K-line - may serve well to this purpose. The 83Rb decaying to 83mKr seems to be a very suitable radioactive source due to its halflife of 86.2 day. In this work, we determine the amount of 83Rb which is necessary for a successful monitoring.

  20. Laser-driven micro-Coulomb charge movement and energy conversion to relativistic electrons

    Science.gov (United States)

    Cobble, J. A.; Palaniyappan, S.; Johnson, R. P.; Shimada, T.; Huang, C.; Gautier, D. C.; Clark, D. D.; Falk, K.; Jung, D.

    2016-09-01

    Development of robust instrumentation has shown evidence for a multi-μC expulsion of relativistic electrons from a sub-μm-thick foil, laser illuminated with 60-70 J on target at 2 × 1020 W/cm2. From previous work and with electron spectroscopy, it is seen that an exponential electron energy distribution is accurate enough to calculate the emitted electron charge and energy content. The 5-10-μC charge for the >100-TW Trident Laser represents the first active measurement of the >50% laser-light-to-electron conversion efficiency. By shorting out the TV/m electric field usually associated with accelerating multi-MeV ions from such targets, one finds that this charge is representative of a multi-MA current of relativistic electrons for diverse applications from electron fast ignition to advanced radiography concepts. Included with the details of the discoveries of this research, shortcomings of the diagnostics and means of improving their fidelity are discussed.

  1. Electron exchanges in nuclear spin conversion of hydrogen physisorbed on diamagnetic insulators

    Science.gov (United States)

    Ilisca, Ernest; Ghiglieno, Filippo

    2014-10-01

    Models are provided and discussed to interpret new experiments on the ortho-para conversion of hydrogen "physisorbed" on dielectric and diamagnetic surfaces. Electro-static and dynamical molecule-surface interactions complemented by hyperfine contacts are shown to be generally more effective than the magnetic ones. Coulomb repulsion induces exchanges of molecular and surface electrons and excites triplet spin states which are effective in the angular momenta transfers to the catalyst. The conversion time is obtained as the square of a ratio of two energies: the exchange and excitation ones. The main channel is found composed of triplet excitations of the order of the eV, induced by molecule-surface exchanges of about a hundred of meV. It explains the zinc and oxygen rates of about one minute observed on the MOF samples as well as the about ten times slower ones on the ASW. The same mechanism is also shown to occur in the transient regime, but faster. Finally it explains also the conversion of a few hours observed for interstitial hydrogen in silicium by transitions to the conduction band induced by about 10 meV electron exchanges. The molecule-surface orbital geometries of the MOF and ASW configurations are displayed and the quantum path when unfolded exhibits the successive broken symmetries.

  2. Muon conversion to electron in nuclei in type-I seesaw models

    CERN Document Server

    Alonso, Rodrigo; Gavela, M B; Hambye, Thomas

    2012-01-01

    We compute the muon to electron conversion in the type-I seesaw model, as a function of the right-handed neutrino mixings and masses. The results are compared with previous computations in the literature. We determine the definite predictions resulting for the ratios between the muon to electron conversion rate for a given nucleus and the rate of two other processes which also involve a mu-e flavour transition: mu -> e gamma and mu -> eee. For a quasi-degenerate mass spectrum of right-handed neutrino masses -which is the most natural scenario leading to observable rates- those ratios depend only on the seesaw mass scale, offering a quite interesting testing ground. In the case of sterile neutrinos heavier than the electroweak scale, these ratios vanish typically for a mass scale of order a few TeV. Furthermore, the analysis performed here is also valid down to very light masses. It turns out that planned mu -> e conversion experiments would be sensitive to masses as low as 2 MeV. Taking into account other exp...

  3. Influences of Uncaptured Electron on Energy Conversion of Photon Compton Scattering in High Power Laser-plasma

    Institute of Scientific and Technical Information of China (English)

    ZHENG Jing-hua; HAO Xiao-fei; HAO Dong-shan

    2004-01-01

    Using the single particle theory and the non-flexibility collision model of electron and photon, the influence of the uncaptured electrons on the energy conversion efficiency of multi-photon nonlinear Compton scattering in the extra stationary laser-plasma is investigated. It shows that in extra stationary laser-plasma,the uncaptured electrons make the Δω of the scattering frequency of the multi-photon Compton fall down with the increases of the incident radiation electron speed,the materials of the incident collision of electron and photon, and the number of the photons which work with the electrons at the same time. Under the modulation of the uncaptured electrons to the laser field, the energy conversion efficiency between electrons and photons will fall down with the increase of the electron incident radiation speed, using the low-power electrons for incident source, the loss can be efficiently reduced.

  4. Dose conversion coefficients for electron exposure of the human eye lens

    Energy Technology Data Exchange (ETDEWEB)

    Behrens, R [Physikalisch-Technische Bundesanstalt, Bundesallee 100, D-38116 Braunschweig (Germany); Dietze, G [Paracelsusstrasse 7, D-38116 Braunschweig (Germany); Zankl, M [Helmholtz Zentrum Muenchen, Ingolstaedter Landstrasse 1, D-85764 Neuherberg (Germany)], E-mail: rolf.behrens@ptb.de

    2009-07-07

    Recent epidemiological studies suggest a rather low dose threshold (below 0.5 Gy) for the induction of a cataract of the eye lens. Some other studies even assume that there is no threshold at all. Therefore, protection measures have to be optimized and current dose limits for the eye lens may be reduced in the future. Two questions arise from this situation: first, which dose quantity is related to the risk of developing a cataract, and second, which personal dose equivalent quantity is appropriate for monitoring this dose quantity. While the dose equivalent quantity H{sub p}(0.07) has often been seen as being sufficiently accurate for monitoring the dose to the lens of the eye, this would be questionable in the case when the dose limits were reduced and, thus, it may be necessary to generally use the dose equivalent quantity H{sub p}(3) for this purpose. The basis for a decision, however, must be the knowledge of accurate conversion coefficients from fluence to equivalent dose to the lens. This is especially important for low-penetrating radiation, for example, electrons. Formerly published values of conversion coefficients are based on quite simple models of the eye. In this paper, quite a sophisticated model of the eye including the inner structure of the lens was used for the calculations and precise conversion coefficients for electrons with energies between 0.2 MeV and 12 MeV, and for angles of radiation incidence between 0 deg. and 45 deg. are presented. Compared to the values adopted in 1996 by the International Commission on Radiological Protection (ICRP), the new values are up to 1000 times smaller for electron energies below 1 MeV, nearly equal at 1 MeV and above 4 MeV, and by a factor of 1.5 larger at about 1.5 MeV electron energy.

  5. Dose conversion coefficients for electron exposure of the human eye lens

    Science.gov (United States)

    Behrens, R.; Dietze, G.; Zankl, M.

    2009-07-01

    Recent epidemiological studies suggest a rather low dose threshold (below 0.5 Gy) for the induction of a cataract of the eye lens. Some other studies even assume that there is no threshold at all. Therefore, protection measures have to be optimized and current dose limits for the eye lens may be reduced in the future. Two questions arise from this situation: first, which dose quantity is related to the risk of developing a cataract, and second, which personal dose equivalent quantity is appropriate for monitoring this dose quantity. While the dose equivalent quantity Hp(0.07) has often been seen as being sufficiently accurate for monitoring the dose to the lens of the eye, this would be questionable in the case when the dose limits were reduced and, thus, it may be necessary to generally use the dose equivalent quantity Hp(3) for this purpose. The basis for a decision, however, must be the knowledge of accurate conversion coefficients from fluence to equivalent dose to the lens. This is especially important for low-penetrating radiation, for example, electrons. Formerly published values of conversion coefficients are based on quite simple models of the eye. In this paper, quite a sophisticated model of the eye including the inner structure of the lens was used for the calculations and precise conversion coefficients for electrons with energies between 0.2 MeV and 12 MeV, and for angles of radiation incidence between 0° and 45° are presented. Compared to the values adopted in 1996 by the International Commission on Radiological Protection (ICRP), the new values are up to 1000 times smaller for electron energies below 1 MeV, nearly equal at 1 MeV and above 4 MeV, and by a factor of 1.5 larger at about 1.5 MeV electron energy.

  6. Conversion from Single Photon to Single Electron Spin Using Electrically Controllable Quantum Dots

    Science.gov (United States)

    Oiwa, Akira; Fujita, Takafumi; Kiyama, Haruki; Allison, Giles; Ludwig, Arne; Wieck, Andreas D.; Tarucha, Seigo

    2017-01-01

    Polarization is a fundamental property of light and could provide various solutions to the development of secure optical communications with high capacity and high speed. In particular, the coherent quantum state conversion between single photons and single electron spins is a prerequisite for long-distance quantum communications and distributed quantum computation. Electrically defined quantum dots have already been proven to be suitable for scalable solid state qubits by demonstrations of single-spin coherent manipulations and two-qubit gate operations. Thus, their capacity for quantum information technologies would be considerably extended by the achievement of entanglement between an electron spin in the quantum dots and a photon. In this review paper, we show the basic technologies for trapping single electrons generated by single photons in quantum dots and for detecting their spins using the Pauli effect with sensitive charge sensors.

  7. Angular dependence, blackness and polarization effects in integral conversion electron Mössbauer spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Sajti, Sz., E-mail: sajti.szilard@wigner.mta.hu; Tanczikó, F.; Deák, L.; Nagy, D.L.; Bottyán, L.

    2015-01-01

    General expressions of the electron yield in {sup 57}Fe integral conversion electron Mössbauer spectroscopy were derived depending on the glancing angle of the γ photons, on the source polarization and on the isotopic abundance of the source and the absorber (blackness effects) using an exponential escape function of the electrons originating from all Mössbauer-resonance-related processes. The present approach provides a firm theoretical basis to determine the alignment and direction of magnetization in the absorber. The intensity formulae were justified by least squares fits of α-{sup 57}Fe spectral intensities measured in linearly and elliptically polarized source and absorber geometries. The fits reproduce the experimentally set angles with high accuracy. Limits of the current approach and its relation to other, less complete treatments in the literature are discussed.

  8. Low-energy internal conversion electrons spectrometry with a silicon diode

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Thiago R. [Universidade de Sao Paulo (USP), Sao Paulo, SP (Brazil). Inst. de Fisica; Camargo, Fabio de; Goncalves, Josemary A.C. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)]. E-mail: fcamargo@ipen.br; josemary@ipen.br; ccbueno@ipen.br; Bueno, Carmen C. [Pontificia Universidade Catolica de Sao Paulo (PUC/SP), Sao Paulo, SP (Brazil). Dept. de Fisica; Fraga, Margarida R.F. [Universidade de Coimbra, Coimbra (Portugal). Dept. de Fisica. Lab. de Instrumentacao e Fisica Experimental de Particulas]. E-mail: margarida@lipc.fis.uc.pt

    2007-07-01

    In this paper the preliminary results obtained with a PIN photodiode (SFH00206) for the detection and spectrometry of internal results from {sup 57}Co, {sup 109}Cd and {sup 133}Ba radioactive sources are described. The effect of the reverse bias on the energy resolution was studied and has shown a value of 2.8 keV (FHWM) for the {sup 57}Co 129.36 keV electron emission, when the diode was biased with 20 V at a temperature of 22 degree C. The obtained energy resolution can be attributed to both the energy loss in the diode dead layer and in the Makrofol covering of the sources, besides the contribution of the preamplifier electronic noise. Nevertheless, the energy resolutions measured are sufficiently good to justify the use of the diode for detection and spectrometry of internal conversion electrons. (author)

  9. Beam characterization for the field-emitter-array cathode-based low-emittance gun

    Directory of Open Access Journals (Sweden)

    S. C. Leemann

    2007-07-01

    Full Text Available A 1   Å x-ray free electron laser can be operated at 6 GeV provided a very high brightness electron beam. Therefore, Paul Scherrer Institute has initiated development of the low-emittance gun based on field emission. A field-emitter array (FEA is expected to deliver high peak current while reducing the source emittance to levels close to the thermal limit. A 100 keV gun test stand has been designed in order to gain experience with electron bunches emitted by pulsed FEAs, investigate emittance compensation, and develop diagnostic procedures to characterize the beam. First FEA samples have been installed and pulsed in the gun; the emitted bunches have been accelerated and characterized. We present results acquired with the first FEA samples.

  10. Importance and Challenges of Electrochemical in Situ Liquid Cell Electron Microscopy for Energy Conversion Research.

    Science.gov (United States)

    Hodnik, Nejc; Dehm, Gerhard; Mayrhofer, Karl J J

    2016-09-20

    The foreseeable worldwide energy and environmental challenges demand renewable alternative sources, energy conversion, and storage technologies. Therefore, electrochemical energy conversion devices like fuel cells, electrolyzes, and supercapacitors along with photoelectrochemical devices and batteries have high potential to become increasingly important in the near future. Catalytic performance in electrochemical energy conversion results from the tailored properties of complex nanometer-sized metal and metal oxide particles, as well as support nanostructures. Exposed facets, surface defects, and other structural and compositional features of the catalyst nanoparticles affect the electrocatalytic performance to varying degrees. The characterization of the nanometer-size and atomic regime of electrocatalysts and its evolution over time are therefore paramount for an improved understanding and significant optimization of such important technologies like electrolyzers or fuel cells. Transmission electron microscopy (TEM) and scanning transmission electron microscope (STEM) are to a great extent nondestructive characterization tools that provide structural, morphological, and compositional information with nanoscale or even atomic resolution. Due to recent marked advancement in electron microscopy equipment such as aberration corrections and monochromators, such insightful information is now accessible in many institutions around the world and provides huge benefit to everyone using electron microscopy characterization in general. Classical ex situ TEM characterization of random catalyst locations however suffers from two limitations regarding catalysis. First, the necessary low operation pressures in the range of 10(-6) to 10(-9) mbar for TEM are not in line with typical reaction conditions, especially considering electrocatalytic solid-liquid interfaces, so that the active state cannot be assessed. Second, and somewhat related, is the lack of time resolution for the

  11. Emittance growth in linear induction accelerators

    CERN Document Server

    Ekdahl, C A; Schulze, M E; Carlson, C A; Frayer, D K; Mostrum, C; Thoma, C H

    2014-01-01

    The Dual-Axis Radiographic Hydrotest (DARHT) facility uses bremsstrahlung radiation source spots produced by the focused electron beams from two linear induction accelerators (LIAs) to radiograph large hydrodynamic experiments driven by high explosives. Radiographic resolution is determined by the size of the source spot, and beam emittance is the ultimate limitation to spot size. On the DARHT Axis-II LIA we measure an emittance higher than predicted by theoretical simulations, and even though this axis produces sub-millimeter source spots, we are exploring ways to improve the emittance. Some of the possible causes for the discrepancy have been investigated using particle-in-cell (PIC) codes, although most of these are discounted based on beam measurements. The most likely source of emittance growth is a mismatch of the beam to the magnetic transport, which can cause beam halo.

  12. Mode conversion and electron heating near the upper hybrid resonance frequency

    Energy Technology Data Exchange (ETDEWEB)

    Smith, B.L.; Okuda, H.; Abe, H.

    1983-11-01

    Mode conversion near the upper hybrid resonance frequency and electron heating are studied using a one-dimensional electromagnetic relativistic particle code. It is found that for a sufficiently small pump field E/sub 0/, E/sub 0//sup 2//4..pi..nT/sub e/ less than or equal to 0.01, electron heating is localized in a region near the electron cyclotron layer where the pump frequency is equal to the local electron gyrofrequency. For stronger pump fields, electron heating takes place more or less uniformly across a region between the upper hybrid resonance layer and the cyclotron layer. In addition, a significant fraction of electromagnetic energy associated with the pump is found to be reflected back into the vacuum from a region in the plasma near the upper hybrid resonance layer for both strong (E/sub 0//sup 2//4..pi..nT/sub e/ approx. = 1) and weak pumps (E/sub 0//sup 2//4..pi..nT/sub e/ << 1).

  13. Watching the dynamics of electrons and atoms at work in solar energy conversion

    Energy Technology Data Exchange (ETDEWEB)

    Canton, S. E.; Zhang, X.; Liu, Y.; Zhang, J.; Pápai, M.; Corani, A.; Smeigh, A. L.; Smolentsev, G.; Attenkofer, K.; Jennings, G.; Kurtz, C. A.; Li, F.; Harlang, T.; Vithanage, D.; Chabera, P.; Bordage, A.; Sun, L.; Ott, S.; Wärnmark, K.; Sundström, V.

    2015-07-06

    The photochemical reactions performed by transition metal complexes have been proposed as viable routes towards solar energy conversion and storage into other forms that can be conveniently used in our everyday applications. In order to develop efficient materials, it is necessary to identify, characterize and optimize the elementary steps of the entire process on the atomic scale. To this end, we have studied the photoinduced electronic and structural dynamics in two heterobimetallic ruthenium–cobalt dyads, which belong to the large family of donor–bridge–acceptor systems. Using a combination of ultrafast optical and X-ray absorption spectroscopies, we can clock the light-driven electron transfer processes with element and spin sensitivity. In addition, the changes in local structure around the two metal centers are monitored. These experiments show that the nature of the connecting bridge is decisive for controlling the forward and the backward electron transfer rates, a result supported by quantum chemistry calculations. More generally, this work illustrates how ultrafast optical and X-ray techniques can disentangle the influence of spin, electronic and nuclear factors on the intramolecular electron transfer process. Finally, some implications for further improving the design of bridged sensitizer-catalysts utilizing the presented methodology are outlined.

  14. Watching the dynamics of electrons and atoms at work in solar energy conversion.

    Science.gov (United States)

    Canton, S E; Zhang, X; Liu, Y; Zhang, J; Pápai, M; Corani, A; Smeigh, A L; Smolentsev, G; Attenkofer, K; Jennings, G; Kurtz, C A; Li, F; Harlang, T; Vithanage, D; Chabera, P; Bordage, A; Sun, L; Ott, S; Wärnmark, K; Sundström, V

    2015-01-01

    The photochemical reactions performed by transition metal complexes have been proposed as viable routes towards solar energy conversion and storage into other forms that can be conveniently used in our everyday applications. In order to develop efficient materials, it is necessary to identify, characterize and optimize the elementary steps of the entire process on the atomic scale. To this end, we have studied the photoinduced electronic and structural dynamics in two heterobimetallic ruthenium-cobalt dyads, which belong to the large family of donor-bridge-acceptor systems. Using a combination of ultrafast optical and X-ray absorption spectroscopies, we can clock the light-driven electron transfer processes with element and spin sensitivity. In addition, the changes in local structure around the two metal centers are monitored. These experiments show that the nature of the connecting bridge is decisive for controlling the forward and the backward electron transfer rates, a result supported by quantum chemistry calculations. More generally, this work illustrates how ultrafast optical and X-ray techniques can disentangle the influence of spin, electronic and nuclear factors on the intramolecular electron transfer process. Finally, some implications for further improving the design of bridged sensitizer-catalysts utilizing the presented methodology are outlined.

  15. Conversion of stacking fault tetrahedra to voids in electron irradiated Fe-Cr-Ni

    Science.gov (United States)

    Kojima, S.; Sano, Y.; Yoshiie, T.; Yoshida, N.; Kiritani, M.

    1986-11-01

    Electron irradiations of the austenitic Fe-13Cr-14Ni alloy were performed with a high voltage electron microscope at temperatures between room temperature and 650 K. Formation of stacking fault tetrahedra, voids and dislocation loops was observed as vacancy clusters. At the lower temperatures, the dominant vacancy clusters were tetrahedra and at the higher temperatures, voids were dominant. In the temperature range at which both tetrahedra and voids were coexistent, conversion of tetrahedra to voids were observed. These results are interpreted as the preferable nucleation of voids at the site of tetrahedra. Local effects of dilatation field at the corner of tetrahedra and the segregation of solute atoms are considered to enhance the nucleation. Clustered defects which are considered to be stacking fault tetrahedra that are formed with D-T fusion neutrons in SUS 316 stainless steel are suggested as the preferable site for void nucleation.

  16. Single-atom coherent field electron emitters for practical application to electron microscopy: Buildup controllability, self-repairing function and demountable characteristic

    Energy Technology Data Exchange (ETDEWEB)

    Rokuta, E. [Institute for Material Science and Technologies, Waseda University, 2-8-26 Nishiwaseda, Shinjuku, Tokyo 169-0051 (Japan)]. E-mail: rokuta@waseda.jp; Itagaki, T. [Institute for Material Science and Technologies, Waseda University, 2-8-26 Nishiwaseda, Shinjuku, Tokyo 169-0051 (Japan); Ishikawa, T. [Institute for Material Science and Technologies, Waseda University, 2-8-26 Nishiwaseda, Shinjuku, Tokyo 169-0051 (Japan); Cho, B.-L. [Institute for Material Science and Technologies, Waseda University, 2-8-26 Nishiwaseda, Shinjuku, Tokyo 169-0051 (Japan); Kuo, H.-S. [Institute of Physics, Academia Sinica, Nankang, Taipei, Taiwan (China); Tsong, T.T. [Institute of Physics, Academia Sinica, Nankang, Taipei, Taiwan (China); Oshima, C. [Institute for Material Science and Technologies, Waseda University, 2-8-26 Nishiwaseda, Shinjuku, Tokyo 169-0051 (Japan)

    2006-03-15

    We have fabricated single-atom field emission (FE) tips by annealing Rh-deposited W tips at 900 K, and the FE characteristics were investigated. Due to the formation of the nanotips, the electron beams were confined in a semi-cone angle of 3 deg., an indication quite different from the conventional FE beams. In repairing-function test where the FE nanotips were intentionally destroyed beforehand, they recovered the peculiar FE characteristics by means of feasible low temperature annealing. Finally, we found that the present nanotips equipped the capability of recovering the unique FE properties even after an exposure to the air. These characteristics are significantly relevant to the practical applications to electron-optics instruments.

  17. The DIORAMA Neutron Emitter

    Energy Technology Data Exchange (ETDEWEB)

    Terry, James Russell [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-05-05

    Emission of neutrons in a given event is modeled by the DioramaEmitterNeutron object, a subclass of the abstract DioramaEmitterModule object. The GenerateEmission method of this object is the entry point for generation of a neutron population for a given event. Shown in table 1, this method requires a number of parameters to be defined in the event definition.

  18. A crystal detector for measuring beta and internal conversion electrons in flowing air containing fission gases

    Science.gov (United States)

    Schell, W. R.; Vives-Batlle, J.; Yoon, S. R.; Tobin, M. J.

    1999-02-01

    Low levels of radioactive gases are released from nuclear electric power generation, nuclear fuel reprocessing plants, nuclear weapons tests and from diagnostic medical uses of radioactive gas tracers. A prototype model of an inorganic scintillator - Crystal Gas Electron Detector (CGED) - was built for measurements of xenon isotopes in-line by detecting the beta and internal conversion (IC) electrons present in atmospheric samples. The detection and quantification of the radionuclide spectra are accomplished, during air flow, without complete purification of the fission gases. Initial operational tests and calibrations made permit the integration of the CGED into a portable Gas Analysis, Separation and Purification (GASP) system [1-3]. The CGED detector, Pulse Shaping and Timing (PSA) electronics, and mathematical treatment of the accumulated spectra are used to resolve the K and LMNO-IC electrons and beta continuum. These data are used, in-line, for dating the age of an air parcel containing fission gases released from nuclear reactors and/or from nuclear weapons tests, as part of the monitoring equipment required to enforce the Comprehensive Test Ban Treaty, CTBT. This report is one of a series of papers providing the design features, operational methods, calibration, and applications of radioactive gas analysis system to the International CTBT.

  19. Emittance measurement of high-brightness microbeams

    Energy Technology Data Exchange (ETDEWEB)

    Ishizuka, Hiroshi; Nakahara, Yuriko (Fukuoka Inst. of Tech. (Japan)); Kawasaki, Sunao; Musyoki, S.; Shimizu, Hiroshi; Watanabe, Akihiko; Shiho, Makoto

    1994-09-01

    Arrays of microtriodes have recently become available due to the development of microfabricated field-emission electron sources. Computer simulation has shown that the brightness of beams emitted by them is significantly higher than that of the common microbeams, and possible application of the accelerated beam to free electron lasers has been discussed. Experimentation on beam generation has started, but methods for diagnosing the beam have not yet been established. Difficulty is predicted, because of the high brightness, in applying the conventional methods of emittance measurement. In this paper we propose a new method that determines the emittance without using apertures. The cross section of a converging beam is elongated by a quadrupole lens, and parameters of the emittance ellipse are obtained from the beam size on a screen when changing either the strength or the axial position of the quadrupole lens. (author).

  20. Conversion electron spectroscopy at the FMA focal plane: Decay studies of proton-rich N {approximately} 82 nuclei

    Energy Technology Data Exchange (ETDEWEB)

    Nisius, D.; Janssens, R.V.F.; Ahmad, I. [and others

    1995-08-01

    The FMA has proven to be an ideal instrument for the detailed study of the decay of microsecond isomers behind the focal plane following mass selection. In reactions leading to the population of nuclei with isomeric lifetimes longer than their flight time through the device, decay gamma rays and conversion electrons can be detected in an environment free from the backgrounds of prompt radiation and delta electrons. This was a very successful technique to study proton (h{sub 11/2}){sup n} seniority isomers in nuclei with Z > 64 and N {approximately} 82. Since isomeric decay gamma rays are emitted isotropically, conversion electrons are essential for the assignment of multipolarities in these nuclei. Furthermore, the low-energy transitions that depopulate isomeric states are typically highly converted and can escape gamma-ray detection, but they can be identified by their conversion electrons.

  1. TOMOGRAPHIC MEASUREMENT OF LONGITUDINAL EMITTANCE GROWTH DUE TO STRIPPING FOILS.

    Energy Technology Data Exchange (ETDEWEB)

    MONTAG, C.; AHRENS, L.; THIEBERGER, P.

    2005-05-16

    During beam acceleration in the Brookhaven accelerator complex, heavy ions are stripped of their electrons in several steps. Depending on the properties of the stripping foils, this process results in an increased energy spread and longitudinal emittance growth. A tomographic phase space reconstruction technique has been applied to measure the associated emittance growth for different stripping foil materials.

  2. Thermionic scanner pinpoints work function of emitter surfaces

    Science.gov (United States)

    Rasor, N. S.

    1966-01-01

    In the electron tube testing, a thermionic scanner makes accurate spatial resolution measurements of the metallic surface work functions of emitters. The scanner determines the emitter function and its local departures from the mean value on a point-by-point basis for display on an oscilloscope.

  3. Nanoscale triboelectric-effect-enabled energy conversion for sustainably powering portable electronics.

    Science.gov (United States)

    Wang, Sihong; Lin, Long; Wang, Zhong Lin

    2012-12-12

    Harvesting energy from our living environment is an effective approach for sustainable, maintenance-free, and green power source for wireless, portable, or implanted electronics. Mechanical energy scavenging based on triboelectric effect has been proven to be simple, cost-effective, and robust. However, its output is still insufficient for sustainably driving electronic devices/systems. Here, we demonstrated a rationally designed arch-shaped triboelectric nanogenerator (TENG) by utilizing the contact electrification between a polymer thin film and a metal thin foil. The working mechanism of the TENG was studied by finite element simulation. The output voltage, current density, and energy volume density reached 230 V, 15.5 μA/cm(2), and 128 mW/cm(3), respectively, and an energy conversion efficiency as high as 10-39% has been demonstrated. The TENG was systematically studied and demonstrated as a sustainable power source that can not only drive instantaneous operation of light-emitting diodes (LEDs) but also charge a lithium ion battery as a regulated power module for powering a wireless sensor system and a commercial cell phone, which is the first demonstration of the nanogenerator for driving personal mobile electronics, opening the chapter of impacting general people's life by nanogenerators.

  4. Dose-rate conversion factors for external exposure to photons and electrons

    Energy Technology Data Exchange (ETDEWEB)

    Kocher, D.C.

    1981-08-01

    Dose-rate conversion factors for external exposure to photons and electrons have been calculated for approximately 500 radionuclides of potential importance in environmental radiological assessments. The dose-rate factors were obtained using the DOSFACTER computer code. The results given in this report incorporate calculation of electron dose-rate factors for radiosensitive tissues of the skin, improved estimates of organ dose-rate factors for photons, based on organ doses for monoenergetic sources at the body surface of an exposed individual, and the spectra of scattered photons in air from monoenergetic sources in an infinite, uniformly contaminated atmospheric cloud, calculation of dose-rate factors for other radionuclides in addition to those of interest in the nuclear fuel cycle, and incorporation of updated radioactive decay data for all radionuclides. Dose-rate factors are calculated for three exposure modes - immersion in contaminated air, immersion in contaminated water, and exposure at a height of 1 m above a contaminated ground surface. The report presents the equations used to calculate the external dose-rate factors for photons and electrons, documentation of the revised DOSFACTER computer code, and a complete tabulation of the calculated dose-rate factors. 30 refs., 12 figs.

  5. Measurements of conversion electrons in the s-process branching point nucleus {sup 176}Lu

    Energy Technology Data Exchange (ETDEWEB)

    Battaglia, A.; Tan, W.; Avetisyan, R.; Casarella, C.; Gyurijinyan, A.; Manukyan, K.V.; Marley, S.T.; Nystrom, A.; Paul, N.; Siegl, K.; Smith, K.; Smith, M.K.; Strauss, S.Y.; Aprahamian, A. [University of Notre Dame, Department of Physics, Notre Dame, IN (United States)

    2016-05-15

    Conversion coefficients, gamma-gamma and gamma-electron coincidences were measured in the s-process branching point nucleus {sup 176}Lu. Our goal was to determine the multipolarities of the γ-ray transitions that connect the high and low K states of {sup 176}Lu. This {sup 176}Lu nucleus has a long-lived ground state (K=7{sup -}) of 37.6 Gy, a short-lived isomeric state (K=0{sup -}) at 122.8 keV with half-life of 3.6 h, as well as a 58 μs isomer at 1588 keV (K=14{sup +}). The excitation structure of this nucleus contains bands of intermediate spins of both positive and negative parities. The intermediate states can under certain stellar temperatures completely change the equilibrium between the isomer and ground state of {sup 176}Lu and change the abundance of this nucleus. We populated 37 previously known levels in this nucleus via the {sup 176}Yb(p,n) reaction and measured 42 conversion coefficients for γ-ray transitions including 17 of them for the first time. (orig.)

  6. Electronic communication in tetrathiafulvalene (TTF)/C60 systems: toward molecular solar energy conversion materials?

    Science.gov (United States)

    Martín, Nazario; Sánchez, Luis; Herranz, María Angeles; Illescas, Beatriz; Guldi, Dirk M

    2007-10-01

    The covalent connection of the electron acceptor C 60 to p-quinonoid pi-extended tetrathiafulvalenes (exTTFs) has allowed for the preparation of new photo- and electroactive conjugates able to act as artificial photosynthetic systems and active molecular materials in organic photovoltaics. The gain of aromaticity undergone by the pi-extended TTF unit in the oxidation process results in highly stabilized radical ion pairs, namely, C 60 (*-)/exTTF (*+). Lifetimes for such charge-separated states, ranging from a few nanoseconds to hundreds of microseconds, have been achieved by rationally modifying the nature of the chemical spacers. These long-lived radical pairs are called to play an important role for the conversion of sunlight into chemical or electrical power.

  7. Using the Fermilab proton source for a muon to electron conversion experiment

    Energy Technology Data Exchange (ETDEWEB)

    Ankenbrandt, C.; Bogert, D.; DeJongh, F.; Geer, S.; McGinnis, D.; Neuffer, D.; Popovic, M.; Prebys, E.; /Fermilab

    2006-11-01

    The Fermilab proton source is capable of providing 8 GeV protons for both the future long-baseline neutrino program (NuMI), and for a new program of low energy muon experiments. In particular, if the 8 GeV protons are rebunched and then slowly extracted into an external beamline, the resulting proton beam would be suitable for a muon-to-electron conversion experiment designed to improve on the existing sensitivity by three orders of magnitude. We describe a scheme for the required beam manipulations. The scheme uses the Accumulator for momentum stacking, and the Debuncher for bunching and slow extraction. This would permit simultaneous operation of the muon program with the future NuMI program, delivering 10{sup 20} protons per year at 8 GeV for the muon program at the cost of a modest ({approx}10%) reduction in the protons available to the neutrino program.

  8. One-dimensional ordinary-slow extraordinary-Bernstein mode conversion in the electron cyclotron range of frequencies

    Science.gov (United States)

    Guo, Xingyu; Gao, Zhe; Jia, Guozhang

    2017-08-01

    The ordinary-slow extraordinary-Bernstein (O-SX-B) mode conversion in the electron cyclotron range of frequencies (ECRF) is revisited in slab geometry. The analytical formula of the O-SX conversion efficiency by Mjølhus is upgraded to include the magnetic field gradient, and the analytical expression of the SX-B conversion efficiency by Ram and Schultz is generalized for the case of oblique injection. Therefore, the conversion efficiency and optimal parallel refractive index for the whole O-SX-B conversion are obtained analytically and a shift of optimal parallel refractive index due to SX-FX loss is found. Full wave calculations are also presented to be compared with the analytical results.

  9. Observation of picometer vertical emittance with a vertical undulator.

    Science.gov (United States)

    Wootton, K P; Boland, M J; Dowd, R; Tan, Y-R E; Cowie, B C C; Papaphilippou, Y; Taylor, G N; Rassool, R P

    2012-11-09

    Using a vertical undulator, picometer vertical electron beam emittances have been observed at the Australian Synchrotron storage ring. An APPLE-II type undulator was phased to produce a horizontal magnetic field, which creates a synchrotron radiation field that is very sensitive to the vertical electron beam emittance. The measured ratios of undulator spectral peak heights are evaluated by fitting to simulations of the apparatus. With this apparatus immediately available at most existing electron and positron storage rings, we find this to be an appropriate and novel vertical emittance diagnostic.

  10. 负电子亲和势砷化镓光阴极热发射度测量%Thermal Emittance Measurement of Negative Electron Affinity Gallium Arsenide Photocathode

    Institute of Scientific and Technical Information of China (English)

    吴岱; 潘清; 肖德鑫; 李凯; 杨仁俊; 王建新; 张海旸

    2015-01-01

    作为未来高平均功率、高亮度电子源的重要材料之一,负电子亲和势砷化镓(NEA‐GaAs)光阴极发射的电子束亮度一直以来都是国际上的研究热点。热发射度是电子束能够实现的发射度下限,测量热发射度有利于确定注入器能否提供高亮度的电子束。本文理论计算了 NEA‐GaAs光阴极热发射度数值范围,并基于中国工程物理研究院自由电子激光相干强太赫兹源(FEL‐T Hz )装置,在28 fC的极低电荷量下,采用螺线管扫描法初步测量了NEA‐GaAs光阴极的热发射度。结果显示,NEA‐GaAs光阴极的热发射度为(0.603±0.002)μm/m m。%As one of the most important high average power electron source materials , the high brightness negative electron affinity (NEA ) gallium arsenide (GaAs) photo‐cathode becomes a researcher focus nowadays .The thermal emittance is the lower limit of emittance ,and its measurement is of great importance to determine the brightness that an injector can provide .In this paper ,based on the terahertz free electron laser (FEL‐T Hz) facility in China Academy of Engineering Physics ,some efforts were made to calculate and measure the thermal emittance of NEA‐GaAs photocathode . Under ultra‐low charge of 28 fC NEA‐GaAs photocathode ,the thermal emittance is (0.603 ± 0.002)μm/mm by the solenoid scan method .

  11. Spectral beam combining of multi-single emitters

    Science.gov (United States)

    Wang, Baohua; Guo, Weirong; Guo, Zhijie; Xu, Dan; Zhu, Jing; Zhang, Qiang; Yang, Thomas; Chen, Xiaohua

    2016-03-01

    Spectral beam combination expands the output power while keeps the beam quality of the combined beam almost the same as that of a single emitter. Spectral beam combination has been successfully achieved for high power fiber lasers, diode laser arrays and diode laser stacks. We have recently achieved the spectral beam combination of multiple single emitter diode lasers. Spatial beam combination and beam transformation are employed before beams from 25 single emitter diode lasers can be spectrally combined. An average output power about 220W, a spectral bandwidth less than 9 nm (95% energy), a beam quality similar to that of a single emitter and electro-optical conversion efficiency over 46% are achieved. In this paper, Rigorous Coupled Wave analysis is used to numerically evaluate the influence of emitter width, emitter pitch and focal length of transform lens on diffraction efficiency of the grating and spectral bandwidth. To assess the chance of catastrophic optical mirror damage (COMD), the optical power in the internal cavity of a free running emitter and the optical power in the grating external cavity of a wavelength locked emitter are theoretically analyzed. Advantages and disadvantages of spectral beam combination are concluded.

  12. Nonlinear modeling of low-to-high-frequency noise up-conversion in microwave electron devices

    Science.gov (United States)

    Filicori, Fabio; Traverso, Pier A.; Florian, Corrado

    2003-05-01

    Measurement-based, circuit-oriented non-linear noise modeling of microwave electron devices is still an open field of research, since existing approaches are not always suitable for the accurate prediction of low-frequency noise up-conversion to RF, which represents an essential information for the non-linear circuit analyses performed in the CAD of low phase-noise oscillators. In this paper a technology-independent, empirical approach to the modeling of noise contributions at the ports of electron devices, operating under strongly non-linear conditions, is proposed. Details concerning the analytical formulation of the model, which is derived by considering randomly time-varying perturbations in the basic equations of an otherwise conventional charge-controlled non-linear model, are presented, along with a discussion about the measurement techniques devoted to its experimental characterization. An example of application of the proposed Charge-Controlled Non-linear Noise (CCNN) model is considered in the case of a HBT transistor. Techniques devoted to the implementation of the obtained model in the framework of commercial CAD tools for circuit analysis and design are provided as well.

  13. Nonlocal effects: relevance for the spontaneous emission rates of quantum emitters coupled to plasmonic structures.

    Science.gov (United States)

    Filter, Robert; Bösel, Christoph; Toscano, Giuseppe; Lederer, Falk; Rockstuhl, Carsten

    2014-11-01

    The spontaneous emission rate of dipole emitters close to plasmonic dimers are theoretically studied within a nonlocal hydrodynamic model. A nonlocal model has to be used since quantum emitters in the immediate environment of a metallic nanoparticle probe its electronic structure. Compared to local calculations, the emission rate is significantly reduced. The influence is mostly pronounced if the emitter is located close to sharp edges. We suggest to use quantum emitters to test nonlocal effects in experimentally feasible configurations.

  14. Migration to Intermediate XML for Electronic Data (MIXED: Repository of Durable File Format Conversions

    Directory of Open Access Journals (Sweden)

    René van Horik

    2011-10-01

    Full Text Available Data Archiving and Networked Services (DANS, the Dutch scientific data archive for the social sciences and humanities, is engaged in the Migration to Intermediate XML for Electronic Data (MIXED project to develop open source software that implements the smart migration strategy concerning the long-term archiving of file formats. Smart migration concerns the conversion upon ingest of specific kinds of data formats, such as spreadsheets and databases, to an intermediate XML formatted file. It is assumed that the long-term curation of the XML files is much less problematic than the migration of binary source files and that the intermediate XML file can be converted in an efficient way to file formats that are common in the future. The features of the intermediate XML files are stored in the so-called Standard Data Formats for Preservation (SDFP specification. This XML schema can be considered an umbrella as it contains existing formal descriptions of file formats developed by others. SDFP also contain schemata developed by DANS, for example, a schema for file-oriented databases. It can be used, for example, for the binary DataPerfect format, that was used on a large scale about twenty years ago, and for which no existing XML schema could be found. The software developed in the MIXED project has been set up as a generic framework, together with a number of plug-ins. It can be considered as a repository of durable file format conversions. This paper contains an overview of the results of the MIXED project.

  15. CSR-induced emittance growth in achromats: Linear formalism revisited

    Science.gov (United States)

    Venturini, M.

    2015-09-01

    We review the R-matrix formalism used to describe Coherent Synchrotron Radiation (CSR)-induced projected emittance growth in electron beam transport lines and establish the connection with a description in terms of the dispersion-invariant function.

  16. CSR-induced emittance growth in achromats: Linear formalism revisited

    Energy Technology Data Exchange (ETDEWEB)

    Venturini, M.

    2015-09-11

    We review the R-matrix formalism used to describe Coherent Synchrotron Radiation (CSR)-induced projected emittance growth in electron beam transport lines and establish the connection with a description in terms of the dispersion-invariant function.

  17. Alpha indirect conversion radioisotope power source

    Energy Technology Data Exchange (ETDEWEB)

    Sychov, Maxim [TRACE Photonics Inc., 1680 West Polk, Charleston, IL 61920 (United States)], E-mail: msychov@yahoo.com; Kavetsky, Alexandr; Yakubova, Galina; Walter, Gabriel; Yousaf, Shahid; Lin, Qian; Chan, Doris; Socarras, Heather; Bower, Kenneth [TRACE Photonics Inc., 1680 West Polk, Charleston, IL 61920 (United States)

    2008-02-15

    Advantages of radioisotope-powered electric generators include long service life, wide temperature range operation and high-energy density. We report development of a long-life generator based on indirect conversion of alpha decay energy. Prototyping used 300 mCi Pu-238 alpha emitter and AlGaAs photovoltaic cells designed for low light intensity conditions. The alpha emitter, phosphor screens, and voltaic arrays were assembled into a power source with the following characteristics: I{sub sc}=14 {mu}A; U{sub oc}=2.3 V; power output -21 {mu}W. Using this prototype we have powered an eight-digit electronic calculator and wrist watch.

  18. Conversion electron measurements of 195Au using ICEBall for Nuclear Structure and Astrophysics at the University of Notre Dame

    Science.gov (United States)

    Battaglia, Anthony; Tan, Wanpeng; Aprahamian, Ani; Bauder, William; Casarella, Clark; Gurdal, Gulhan; Long, Alexander; Nystrom, Andrew; Siegl, Kevin; Smith, Karl; Smith, Mallory

    2013-10-01

    The Internal Conversion Electron Ball Array (ICEBall) consists of six Si(Li) detectors and it was recently re-comissioned at the University of Notre Dame Nuclear Science Laboratory for spectroscopic studies of heavy nuclei. For the commissioning experiment, a 16 MeV bunched proton beam was used from the FN Tandem for a (p,2n) reaction to populate low spin states of 195Au. Both conversion electrons and gamma-rays were detected in coincidence between ICEBall and a single high-purity germanium detector. A total of 14 conversion coeffcients were measured. The results will be presented and compared to previous results. This work was supported by the National Science Foundation under contract number NSF PHY-1068192. M.P. Metlay, J.X. Saladin, I.Y. Lee, and O. Dietzsch, Nucl. Instrum. Meth. A, 336, 162 (1993).

  19. A New Cost-Effective Multi-Drive Solution based on a Two-Stage Direct Power Electronic Conversion Topology

    DEFF Research Database (Denmark)

    Klumpner, Christian; Blaabjerg, Frede

    2002-01-01

    of a protection circuit involving twelve diodes with full voltage/current ratings used only during faulty situations, makes this topology not so attractive. Lately, two stage Direct Power Electronic Conversion (DPEC) topologies have been proposed, providing similar functionality as a matrix converter but allowing...

  20. Electrochemical and conversion electron Moessbauer study of corrosion induced by acid rain

    Energy Technology Data Exchange (ETDEWEB)

    Vertes, C.; Lakatos-Varsanyi, M.; Vertes, A. (Dept. of Physical Chemistry and of Nuclear Chemistry, Eoetvoes Univ., Budapest (Hungary)); Meisel, W.; Guetlich, P. (Inst. of Inorganic Chemistry and Analytical Chemistry, Univ. Mainz (Germany))

    1993-04-01

    The passivation of low carbon steel was studied in aqueous solution of 0.5M Na[sub 2]SO[sub 4]+0.001M NaHSO[sub 3] (pH 3.5, 6.5 and 8.5) which can be considered as a model of acid rain. The used conversion electron Moessbauer spectroscopy (CEMS) with the complementary electrochemical investigations proved that the sulfite ions induce pitting corrosion at pH 3.5 and 6.5, while the measurements showed much weaker pitting at pH 8.5. The compositions and thicknesses of the passive films formed during the electrochemical treatments are determined from the CEM spectra. Only [gamma]-FeOOH was found on the surface of the samples at pH 6.5 and 8.5. Nevertheless, at pH 3.5 the sextet belonging to Fe[sub 3]C appears in the spectra, and also FeSO[sub 4].H[sub 2]O could be detected in low concentration. (orig.).

  1. 'Shake-off' account of effects from a Beta-decay at determination of internal conversion coefficients due to secondary electron radiation

    CERN Document Server

    Mitrokhovich, N F

    2002-01-01

    By means of selection coincidence of gamma-quantum with the secondary electrons (e sub o -electrons) and beta-particles (gamma beta e sub 0 -coincidences) and special geometry of measurements the formation of e sub o -electrons from electrons of 'shake-off' accompanying beta-decay is chosen and its output is determined. Influence of this additional source of e sub o -electrons formation on the accuracy of the internal conversion coefficient determination is estimated, when the output of e sub o -electrons from electrons of conversion is defined on the output of e sub o -electrons from beta-particles.

  2. Emittance measurement at the NSLS x-ray ring

    Energy Technology Data Exchange (ETDEWEB)

    Safranek, J.; Stefan, P.M.

    1996-12-31

    A pinhole camera for imaging x-ray synchrotron radiation from a dipole magnet is now in operation at the NSLS X-Ray Ring. The pinhole camera detector is a 0.5 mm thick YAG phosphor screen viewed by a video camera. Both the theoretical pinhole diffraction pattern and the measured modulation transfer function (MTF) of the phosphor and camera have been deconvolved from the measured profile in order to derive the true transverse profile of the electron beam. This profile was then fit to a 2-dimensional Gaussian. The electron beam emittance as a function of the phase space acceptance of the pinhole camera has been derived, so the horizontal and vertical electron emittances can be deduced from the major and minor sigmas of the fit Gaussian. In the X-Ray Ring, the vertical emittance is kept small to maximize the synchrotron radiation brightness. The ratio of the measured vertical to horizontal emittance is 0.001.

  3. Transverse emittance measurement at REGAE via a solenoid scan

    Energy Technology Data Exchange (ETDEWEB)

    Hachmann, Max

    2012-12-15

    The linear accelerator REGAE at DESY produces short and low charged electron bunches, on the one hand to resolve the excitation transitions of atoms temporally by pump probe electron diffraction experiments and on the other hand to investigate principal mechanisms of laser plasma acceleration. For both cases a high quality electron beam is required. A quantity to rate the beam quality is the beam emittance. In the course of this thesis transverse emittance measurements by a solenoid scan could be realized and beyond that an improved theoretical description of a solenoid was successful. The foundation of emittance measurements are constituted by theoretical models which describe the envelope of a beam. Two different models were derived. The first is an often used model to determine the transverse beam emittance without considering space charge effects. More interesting and challenging was the development of an envelope model taking space charge effects into account. It is introduced and cross checked with measurements and simulations.

  4. Transverse emittance measurement at REGAE via a solenoid scan

    Energy Technology Data Exchange (ETDEWEB)

    Hachmann, Max

    2012-12-15

    The linear accelerator REGAE at DESY produces short and low charged electron bunches, on the one hand to resolve the excitation transitions of atoms temporally by pump probe electron diffraction experiments and on the other hand to investigate principal mechanisms of laser plasma acceleration. For both cases a high quality electron beam is required. A quantity to rate the beam quality is the beam emittance. In the course of this thesis transverse emittance measurements by a solenoid scan could be realized and beyond that an improved theoretical description of a solenoid was successful. The foundation of emittance measurements are constituted by theoretical models which describe the envelope of a beam. Two different models were derived. The first is an often used model to determine the transverse beam emittance without considering space charge effects. More interesting and challenging was the development of an envelope model taking space charge effects into account. It is introduced and cross checked with measurements and simulations.

  5. Integration of [(Co(bpy)₃]²⁺ electron mediator with heterogeneous photocatalysts for CO₂ conversion.

    Science.gov (United States)

    Lin, Jinliang; Hou, Yidong; Zheng, Yun; Wang, Xinchen

    2014-09-01

    An efficient chemical system for electron generation and transfer is constructed by the integration of an electron mediator ([Co(bpy)3](2+); bpy=2,2'-bipyridine) with semiconductor photocatalysts. The introduction of [Co(bpy)3](2+) remarkably enhances the photocatalytic activity of pristine semiconductor photocatalysts for heterogeneous CO2 conversion; this is attributable to the acceleration of charge separation. Of particular interest is that the excellent photocatalytic activity of heterogeneous catalysts can be developed as a universal photocatalytic CO2 reduction system. The present findings clearly demonstrate that the integration of an electron mediator with semiconductors is a feasible process for the design and development of efficient photochemical systems for CO2 conversion.

  6. Structural conversion and intramolecular electron transfer in ferrocenylanthraquinones triggered by Keggin type of heteropoly acid serving as proton source

    Institute of Scientific and Technical Information of China (English)

    LIU Shuxia; LI Dehui; SU Zhongmin; WANG Enbo

    2004-01-01

    Intramolecular electron transfer triggered by proton and the mechanism of structural conversion in a ethynylene-bridged ferrocene-anthraquinone organic electron donor(D)-acceptor(A) g-conjugated system (1-FcAq) in the presence of a Keggin type heteropoly acid as proton source are discussed. Heteropoly acids can stabilize the protonated ethynylene-bridged ferrocene-anthraquinone conjugated complex, and the stable protonated complex has been isolated in air and characterized by elemental analyses, IR,1H NMR, and CV. Upon the inducement of proton, electron transfer from ferrocene moiety (Fc) to anthraquinone moiety (Aq) causes the rearrangement of the conjugated system to create a fulvene-cumulene structuere.

  7. Carbon Nanotube Field Emitters

    OpenAIRE

    Zhbanov, Alexander; Pogorelov, Evgeny; Chang, Yia-Chung

    2010-01-01

    In this chapter we theoretically investigate the field emission from carbon nanotube field emitters in diode configuration between a flat anode and cathode. Exact analytical formulas of the electrical field, field enhancement factor, ponderomotive force, and field emission current are found. Applied voltage, height of the needle, radius of curvature on its top, and the work function are the parameters at our disposal. The field enhancement factor, total force and emission current, as well as ...

  8. Two-photon interference from two blinking quantum emitters

    Science.gov (United States)

    Jöns, Klaus D.; Stensson, Katarina; Reindl, Marcus; Swillo, Marcin; Huo, Yongheng; Zwiller, Val; Rastelli, Armando; Trotta, Rinaldo; Björk, Gunnar

    2017-08-01

    We investigate the effect of blinking on the two-photon interference measurement from two independent quantum emitters. We find that blinking significantly alters the statistics in the Hong-Ou-Mandel second-order intensity correlation function g(2 )(τ ) and the outcome of two-photon interference measurements performed with independent quantum emitters. We theoretically demonstrate that the presence of blinking can be experimentally recognized by a deviation from the gD(2 )(0 ) =0.5 value when distinguishable photons from two emitters impinge on a beam splitter. Our findings explain the significant differences between linear losses and blinking for correlation measurements between independent sources and are experimentally verified using a parametric down-conversion photon-pair source. We show that blinking imposes a mandatory cross-check measurement to correctly estimate the degree of indistinguishability of photons emitted by independent quantum emitters.

  9. Understanding the Impact of Field-Emitter Characteristics on Electron Beam Focusing in the VAPoR Time-of-Fight Mass Spectrometer

    Science.gov (United States)

    Southard, Adrian E.; Getty, Stephanie A.; Costen, Nicholas P.; Hidrobo, Gregory B.; Glavin, Daniel P.

    2013-01-01

    Simulations of field emission of electrons from an electron gun are used to determine the angular distribution of the emitted electron beam and the percentage of charge transmitted through the grid. The simulations are a first step towards understanding the spherical aberration present after focusing the electron beam. The effect of offset of the cathode with respect to the grid and the separation between cathode and grid on the angular distributions of emitted electrons and transmission of the grid are explored.

  10. Dose conversion coefficients for monoenergetic electrons incident on a realistic human eye model with different lens cell populations

    Energy Technology Data Exchange (ETDEWEB)

    Nogueira, P; Vaz, P [Technological and Nuclear Institute, Estrada Nacional No 10, 2686-953 Sacavem (Portugal); Zankl, M; Schlattl, H, E-mail: pedro.nogueira@helmholtz-muenchen.de [Helmholtz Zentrum Muenchen-German Research Center for Environmental Health, Research Unit Medical Radiation Physics and Diagnostics, Ingolstaedter Landstrasse 1, D-85764 Neuherberg (Germany)

    2011-11-07

    The radiation-induced posterior subcapsular cataract has long been generally accepted to be a deterministic effect that does not occur at doses below a threshold of at least 2 Gy. Recent epidemiological studies indicate that the threshold for cataract induction may be much lower or that there may be no threshold at all. A thorough study of this subject requires more accurate dose estimates for the eye lens than those available in ICRP Publication 74. Eye lens absorbed dose per unit fluence conversion coefficients for electron irradiation were calculated using a geometrical model of the eye that takes into account different cell populations of the lens epithelium, together with the MCNPX Monte Carlo radiation transport code package. For the cell population most sensitive to ionizing radiation-the germinative cells-absorbed dose per unit fluence conversion coefficients were determined that are up to a factor of 4.8 higher than the mean eye lens absorbed dose conversion coefficients for electron energies below 2 MeV. Comparison of the results with previously published values for a slightly different eye model showed generally good agreement for all electron energies. Finally, the influence of individual anatomical variability was quantified by positioning the lens at various depths below the cornea. A depth difference of 2 mm between the shallowest and the deepest location of the germinative zone can lead to a difference between the resulting absorbed doses of up to nearly a factor of 5000 for electron energy of 0.7 MeV.

  11. Monolithic multinozzle emitters for nanoelectrospray mass spectrometry

    Science.gov (United States)

    Wang, Daojing; Yang, Peidong; Kim, Woong; Fan, Rong

    2011-09-20

    Novel and significantly simplified procedures for fabrication of fully integrated nanoelectrospray emitters have been described. For nanofabricated monolithic multinozzle emitters (NM.sup.2 emitters), a bottom up approach using silicon nanowires on a silicon sliver is used. For microfabricated monolithic multinozzle emitters (M.sup.3 emitters), a top down approach using MEMS techniques on silicon wafers is used. The emitters have performance comparable to that of commercially-available silica capillary emitters for nanoelectrospray mass spectrometry.

  12. Direct Observation of Ultralow Vertical Emittance using a Vertical Undulator

    Energy Technology Data Exchange (ETDEWEB)

    Wootton, Kent

    2015-09-17

    In recent work, the first quantitative measurements of electron beam vertical emittance using a vertical undulator were presented, with particular emphasis given to ultralow vertical emittances [K. P. Wootton, et al., Phys. Rev. ST Accel. Beams, 17, 112802 (2014)]. Using this apparatus, a geometric vertical emittance of 0.9 ± 0.3 pm rad has been observed. A critical analysis is given of measurement approaches that were attempted, with particular emphasis on systematic and statistical uncertainties. The method used is explained, compared to other techniques and the applicability of these results to other scenarios discussed.

  13. Bremsstrahlung and K(alpha) fluorescence measurements for inferring conversion efficiencies into fast ignition relevant hot electrons

    Energy Technology Data Exchange (ETDEWEB)

    Chen, C D; Patel, P K; Hey, D S; Mackinnon, A J; Key, M H; Akli, K U; Bartal, T; Beg, F N; Chawla, S; Chen, H; Freeman, R R; Higginson, D P; Link, A; Ma, T Y; MacPhee, A G; Stephens, R B; Van Woerkom, L D; Westover, B; Porkolab, M

    2009-07-24

    The Bremsstrahlung and K-shell emission from 1 mm x 1 mm x 1 mm planar targets irradiated by a short-pulse 3 x 10{sup 18}-8 x 10{sup 19} W/cm{sup 2} laser were measured. The Bremsstrahlung was measured using a filter stack spectrometer with spectral discrimination up to 500 keV. K-shell emission was measured using a single photon counting charge coupled device (CCD). From Monte Carlo modeling of the target emission, conversion efficiencies into 1-3 MeV electrons of 3-12%, representing 20-40% total conversion efficiencies were inferred for intensities up to 8 x 10{sup 19} W/cm{sup 2}. Comparisons to scaling laws using synthetic energy spectra generated from the intensity distribution of the focal spot imply slope temperatures less than the ponderomotive potential of the laser. Resistive transport effects may result in potentials of a few hundred kV in the first few tens of microns in the target. This would lead to higher total conversion efficiencies than inferred from Monte Carlo modeling but lower conversion efficiencies into 1-3 MeV electrons.

  14. Field emission electron source

    Science.gov (United States)

    Zettl, Alexander Karlwalter; Cohen, Marvin Lou

    2000-01-01

    A novel field emitter material, field emission electron source, and commercially feasible fabrication method is described. The inventive field emission electron source produces reliable electron currents of up to 400 mA/cm.sup.2 at 200 volts. The emitter is robust and the current it produces is not sensitive to variability of vacuum or the distance between the emitter tip and the cathode. The novel emitter has a sharp turn-on near 100 volts.

  15. Beam Emittance Measurement for PLS-II Linac

    CERN Document Server

    Lee, Byung-Joon; Park, Chong do; Chunjarean, SomJai; Kim, Changbum

    2016-01-01

    The PLS-II has a 100 MeV pre-injector for the 3 GeV Linac. A thermionic gun produces electron charge of 200 pC with a bunch duration of 500 ps by a 250 ps triggering pulser. At the pre-injector, one of the most important beam parameters to identify the beam quality is a transverse emittance of electron bunches. Therefore we measure the beam emittance and twiss functions at 100 MeV in order to match the beam optics to beam transport line and go through it to the storage ring. To get the transverse emittance measurement, well-known technique, quadrupole scan, is used at the pre-injector. The emittance were 0.591 mm-mrad in horizontal and 0.774 mm-mrad in vertical direction.

  16. Analysis of emittance compensation and simulation results to photo-cathode RF gun

    CERN Document Server

    LiuShengGuang

    2002-01-01

    The emittance compensation technology will be used on the photo-cathode RF gun for Shanghai SDUV-FEL. The space charge force and its effect on electron beam transverse emittance in RF gun is studied, the principle of emittance compensation in phase-space is discussed. The authors have designed a compensation solenoid and calculated its magnetic field distribution. Its performance has been studied by the code PARMELA. A simulation result indicates that the normalized transverse RMS emittance for electron beam of 1.5 nC is 1.612 pi mm centre dot mrad, electron energy E = 5.71 MeV

  17. Identification of a millisecond isomeric state in Cd81129 via the detection of internal conversion and Compton electrons

    Directory of Open Access Journals (Sweden)

    J. Taprogge

    2014-11-01

    Full Text Available The decay of an isomeric state in the neutron-rich nucleus 129Cd has been observed via the detection of internal conversion and Compton electrons providing first experimental information on excited states in this nucleus. The isomer was populated in the projectile fission of a 238U beam at the Radioactive Isotope Beam Factory at RIKEN. From the measured yields of γ-rays and internal conversion electrons, a multipolarity of E3 was tentatively assigned to the isomeric transition. A half-life of T1/2=3.6(2 ms was determined for the new state which was assigned a spin of (21/2+, based on a comparison to shell model calculations performed using state-of-the-art realistic effective interactions.

  18. Identification of a millisecond isomeric state in 129Cd81via the detection of internal conversion and Compton electrons

    Energy Technology Data Exchange (ETDEWEB)

    Taprogge, J.; Jungclaus, A.; Grawe, H.; Nishimura, S.; Xu, Z. Y.; Doornenbal, P.; Lorusso, G.; Nacher, E.; Simpson, G. S.; Soderstrom, P. A.; Sumikama, T.; Kondev, F. G.

    2014-11-10

    The decay of an isomeric state in the neutron-rich nucleus 129Cd has been observed via the detection of internal conversion and Compton electrons providing first experimental information on excited states in this nucleus. The isomer was populated in the projectile fission of a 238U beam at the Radioactive Isotope Beam Factory at RIKEN. From the measured yields of γ-rays and internal conversion electrons, a multipolarity of E 3 was tentatively assigned to the isomeric transition. A half-life of T1/2=3.6(2) msT1/2=3.6(2) ms was determined for the new state which was assigned a spin of (21/2+)(21/2+), based on a comparison to shell model calculations performed using state-of-the-art realistic effective interactions.

  19. Bulk molybdenum field emitters by inductively coupled plasma etching.

    Science.gov (United States)

    Zhu, Ningli; Cole, Matthew T; Milne, William I; Chen, Jing

    2016-12-07

    In this work we report on the fabrication of inductively coupled plasma (ICP) etched, diode-type, bulk molybdenum field emitter arrays. Emitter etching conditions as a function of etch mask geometry and process conditions were systematically investigated. For optimized uniformity, aspect ratios of >10 were achieved, with 25.5 nm-radius tips realised for masks consisting of aperture arrays some 4.45 μm in diameter and whose field electron emission performance has been herein assessed.

  20. Emittance growth in the DARHT Axis-II Downstream Transport

    OpenAIRE

    Ekdahl, Carl; Schulze, Martin E.

    2017-01-01

    Using a particle-in-cell (PIC) code, we investigated the possibilities for emittance growth through the quadrupole magnets of the system used to transport the high-current electron beam from an induction accelerator to the bremsstrahlung converter target used for flash radiography. We found that even highly mismatched beams exhibited little emittance growth (< 6%), which we attribute to softening of their initial hard edge current distributions. We also used this PIC code to evaluate the accu...

  1. Scalable Focused Ion Beam Creation of Nearly Lifetime-Limited Single Quantum Emitters in Diamond Nanostructures

    CERN Document Server

    Schröder, Tim; Walsh, Michael; Li, Luozhou; Zheng, Jiabao; Schukraft, Marco; Pacheco, Jose L; Camacho, Ryan M; Bielejec, Edward S; Sipahigil, Alp; Evans, Ruffin E; Sukachev, Denis D; Nguyen, Christian T; Lukin, Mikhail D; Englund, Dirk

    2016-01-01

    The controlled creation of defect center---nanocavity systems is one of the outstanding challenges for efficiently interfacing spin quantum memories with photons for photon-based entanglement operations in a quantum network. Here, we demonstrate direct, maskless creation of atom-like single silicon-vacancy (SiV) centers in diamond nanostructures via focused ion beam implantation with $\\sim 32$ nm lateral precision and $< 50$ nm positioning accuracy relative to a nanocavity. Moreover, we determine the Si+ ion to SiV center conversion yield to $\\sim 2.5\\%$ and observe a 10-fold conversion yield increase by additional electron irradiation. We extract inhomogeneously broadened ensemble emission linewidths of $\\sim 51$ GHz, and close to lifetime-limited single-emitter transition linewidths down to $126 \\pm13$ MHz corresponding to $\\sim 1.4$-times the natural linewidth. This demonstration of deterministic creation of optically coherent solid-state single quantum systems is an important step towards development o...

  2. Emissivity Tuned Emitter for RTPV Power Sources

    Energy Technology Data Exchange (ETDEWEB)

    Carl M. Stoots; Robert C. O' Brien; Troy M. Howe

    2012-03-01

    Every mission launched by NASA to the outer planets has produced unexpected results. The Voyager I and II, Galileo, and Cassini missions produced images and collected scientific data that totally revolutionized our understanding of the solar system and the formation of the planetary systems. These missions were enabled by the use of nuclear power. Because of the distances from the Sun, electrical power was produced using the radioactive decay of a plutonium isotope. Radioisotopic Thermoelectric Generators (RTGs) used in the past and currently used Multi-Mission RTGs (MMRTGs) provide power for space missions. Unfortunately, RTGs rely on thermocouples to convert heat to electricity and are inherently inefficient ({approx} 3-7% thermal to electric efficiency). A Radioisotope Thermal Photovoltaic (RTPV) power source has the potential to reduce the specific mass of the onboard power supply by increasing the efficiency of thermal to electric conversion. In an RTPV, a radioisotope heats an emitter, which emits light to a photovoltaic (PV) cell, which converts the light into electricity. Developing an emitter tuned to the desired wavelength of the photovoltaic is a key part in increasing overall performance. Researchers at the NASA Glenn Research Center (GRC) have built a Thermal Photovoltaic (TPV) system, that utilizes a simulated General Purpose Heat Source (GPHS) from a MMRTG to heat a tantalum emitter. The GPHS is a block of graphite roughly 10 cm by 10 cm by 5 cm. A fully loaded GPHS produces 250 w of thermal power and weighs 1.6 kgs. The GRC system relies on the GPHS unit radiating at 1200 K to a tantalum emitter that, in turn, radiates light to a GaInAs photo-voltaic cell. The GRC claims system efficiency of conversion of 15%. The specific mass is around 167 kg/kWe. A RTPV power source that utilized a ceramic or ceramic-metal (cermet) matrix would allow for the combination of the heat source, canister, and emitter into one compact unit, and allow variation in size

  3. Hard electronics; Hard electronics

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In the fields of power conversion devices and broadcasting/communication amplifiers, high power, high frequency and low losses are desirable. Further, for electronic elements in aerospace/aeronautical/geothermal surveys, etc., heat resistance to 500degC is required. Devices which respond to such hard specifications are called hard electronic devices. However, with Si which is at the core of the present electronics, the specifications cannot fully be fulfilled because of the restrictions arising from physical values. Accordingly, taking up new device materials/structures necessary to construct hard electronics, technologies to develop these to a level of IC were examined and studied. They are a technology to make devices/IC of new semiconductors such as SiC, diamond, etc. which can handle higher temperature, higher power and higher frequency than Si and also is possible of reducing losses, a technology to make devices of hard semiconducter materials such as a vacuum microelectronics technology using ultra-micro/high-luminance electronic emitter using negative electron affinity which diamond, etc. have, a technology to make devices of oxides which have various electric properties, etc. 321 refs., 194 figs., 8 tabs.

  4. Role of hot electron base transport in abrupt emitter InP/Ga0.43In0.53As heterojunction bipolar transistors

    Science.gov (United States)

    Ritter, Dan; Hamm, R. A.; Feygenson, A.; Smith, P. R.

    1994-05-01

    The high frequency performance of InP/Ga0.47In0.53As heterojunction bipolar transistors (HBTs) with a varying base thickness was measured. The diffusion constant of minority carrier electrons in the heavily doped base was found to be 105 cm2/s. It is demonstrated that the short base transit times in fast InP/Ga0.47In0.53As HBTs is mainly due to the high value of the diffusion constant of thermalized electrons. The contribution of hot electron ballistic transport is relatively small.

  5. Ultra-low emittance X-band photocathode RF gun

    Institute of Scientific and Technical Information of China (English)

    TANG Chuan-Xiang; LIU Xiao-Han

    2009-01-01

    In this paper,we present the simulation results of a 1.6 cell X-band photocathode RF gun for ultra-low emittance electron beams.It will work at 9.3 GHz.The emittance,bunch length,electron energy and energy spread at the gun exit are optimized at bunch charge of 1pC using PARMELA.Electron bunches type coupler is adopted in this gun and an initial simulation by MAFIA is also given in this paper.

  6. Understanding Power Electronics and Electrical Machines in Multidisciplinary Wind Energy Conversion System Courses

    Science.gov (United States)

    Duran, M. J.; Barrero, F.; Pozo-Ruz, A.; Guzman, F.; Fernandez, J.; Guzman, H.

    2013-01-01

    Wind energy conversion systems (WECS) nowadays offer an extremely wide range of topologies, including various different types of electrical generators and power converters. Wind energy is also an application of great interest to students and with a huge potential for engineering employment. Making WECS the main center of interest when teaching…

  7. Understanding Power Electronics and Electrical Machines in Multidisciplinary Wind Energy Conversion System Courses

    Science.gov (United States)

    Duran, M. J.; Barrero, F.; Pozo-Ruz, A.; Guzman, F.; Fernandez, J.; Guzman, H.

    2013-01-01

    Wind energy conversion systems (WECS) nowadays offer an extremely wide range of topologies, including various different types of electrical generators and power converters. Wind energy is also an application of great interest to students and with a huge potential for engineering employment. Making WECS the main center of interest when teaching…

  8. Emittance of TD-NiCr after simulated reentry

    Science.gov (United States)

    Clark, R. K.; Dicus, D. L.; Lisagor, W. B.

    1978-01-01

    The effects of simulated reentry heating on the emittance of TD-NiCr were investigated. Groups of specimens with three different preconditioning treatments were exposed to 6, 24, and 30 half-hour simulated reentry exposure cycles in a supersonic arc tunnel at each of three conditions intended to produce surface temperatures of 1255, 1365, and 1475 K. Emittance was determined at 1300 K on specimens which were preconditioned only and specimens after completion of reentry simulation exposure. Oxide morphology and chemistry were studied by scanning electron microscopy and X-ray diffraction analysis. A consistent relationship was established between oxide morphology and total normal emittance. Specimens with coarser textured oxides tended to have lower emittances than specimens with finer textured oxides.

  9. Localization of Narrowband Single Photon Emitters in Nanodiamonds.

    Science.gov (United States)

    Bray, Kerem; Sandstrom, Russell; Elbadawi, Christopher; Fischer, Martin; Schreck, Matthias; Shimoni, Olga; Lobo, Charlene; Toth, Milos; Aharonovich, Igor

    2016-03-23

    Diamond nanocrystals that host room temperature narrowband single photon emitters are highly sought after for applications in nanophotonics and bioimaging. However, current understanding of the origin of these emitters is extremely limited. In this work, we demonstrate that the narrowband emitters are point defects localized at extended morphological defects in individual nanodiamonds. In particular, we show that nanocrystals with defects such as twin boundaries and secondary nucleation sites exhibit narrowband emission that is absent from pristine individual nanocrystals grown under the same conditions. Critically, we prove that the narrowband emission lines vanish when extended defects are removed deterministically using highly localized electron beam induced etching. Our results enhance the current understanding of single photon emitters in diamond and are directly relevant to fabrication of novel quantum optics devices and sensors.

  10. Field emitters made of the contacted ytterbium and carbon nanolayers

    Directory of Open Access Journals (Sweden)

    G.G. Sominski

    2015-10-01

    Full Text Available The operation of field emitters of a new type prepared from contacted nanolayers of ytterbium and carbon has been investigated. The performed calculations and experiments allowed to optimize the emission characteristics of the emitters. The calculations took into account the existence of a transition zone between the layers of Yb and C. Emission characteristics of the cathodes including up to 40 pairs of layers of carbon and ytterbium with optimum thicknesses of 5 and 2 nm respectively were measured. The created multilayered emitters provide the average emission current density over the surface of the emitter up to 10–20 A/cm2 and show promise for use in miniature electronic devices.

  11. Localization of narrowband single photon emitters in nanodiamonds

    CERN Document Server

    Bray, Kerem; Elbadawi, Christopher; Fischer, Martin; Schreck, Matthias; Shimoni, Olga; Lobo, Charlene; Toth, Milos; Aharonovich, Igor

    2016-01-01

    Diamond nanocrystals that host room temperature narrowband single photon emitters are highly sought after for applications in nanophotonics and bio-imaging. However, current understanding of the origin of these emitters is extremely limited. In this work we demonstrate that the narrowband emitters are point defects localized at extended morphological defects in individual nanodiamonds. In particular, we show that nanocrystals with defects such as twin boundaries and secondary nucleation sites exhibit narrowband emission that is absent from pristine individual nanocrystals grown under the same conditions. Critically, we prove that the narrowband emission lines vanish when extended defects are removed deterministically using highly localized electron beam induced etching. Our results enhance the current understanding of single photon emitters in diamond, and are directly relevant to fabrication of novel quantum optics devices and sensors.

  12. FXR LIA Optimization - Time-resolved OTR Emittance Measurement

    Energy Technology Data Exchange (ETDEWEB)

    Jacob, J; Ong, M; Wargo, P; LeSage, G

    2005-07-21

    The Flash X-Ray Radiography (FXR) facility at Lawrence Livermore National Laboratory utilizes a high current, long pulse linear induction accelerator to produce high doses of x-ray radiation. Accurate characterization of the transverse beam emittance is required in order to facilitate accelerator modeling and tuning efforts and, ultimately, to optimize the final focus spot size, yielding higher resolution radiographs. In addition to conventional magnet scan, pepper-pot, and multiple screen techniques, optical transition radiation (OTR) has been proven as a useful emittance measurement diagnostic and is particularly well suited to the FXR accelerator. We shall discuss the time-resolved emittance characterization of an induction linac electron beam using OTR, and we will present our experimental apparatus and analysis software. We shall also develop the theoretical background of beam emittance and transition radiation.

  13. Rare Earth Doped High Temperature Ceramic Selective Emitters

    Science.gov (United States)

    Chubb, Donald L.; Pal, AnnaMarie; Patton, Martin O.; Jenkins, Phillip P.

    1999-01-01

    As a result of their electron structure, rare earth ions in crystals at high temperature emit radiation in several narrow bands rather than in a continuous blackbody manner. This study develops a spectral emittance model for films of rare earth containing materials. Although there are several possible rare earth doped high temperature materials, this study was confined to rare earth aluminum garnets. Good agreement between experimental and theoretical spectral emittances was found for erbium, thulium and erbium-holmium aluminum garnets. Spectral emittances of these films are sensitive to temperature differences across the film. Emitter efficiency is also a sensitive function of temperature. For thulium aluminum garnet the efficiency is 0.38 at 1700 K but only 0.19 at 1262 K.

  14. Beam dynamics in rf guns and emittance correction techniques

    Science.gov (United States)

    Serafini, Luca

    1994-02-01

    In this paper we present a general review of beam dynamics in a laser-driven rf gun. The peculiarity of such an accelerating structure versus other conventional multi-cell linac structures is underlined on the basis of the Panofsky-Wenzel theorem, which is found to give a theoretical background for the well known Kim's model. A basic explanation for some proposed methods to correct rf induced emittance growth is also derived from the theorem. We also present three emittance correction techniques for the recovery of space-charge induced emittance growth, namely the optimum distributed disk-like bunch technique, the use of rf spatial harmonics to correct spherical aberration induced by space charge forces and the technique of emittance filtering by clipping the electron beam. The expected performances regarding the beam quality achievable with different techniques, as predicted by scaling laws and simulations, are analyzed, and, where available, compared to experimental results.

  15. Boundary conditions on the plasma emitter surface in the presence of a particle counter flow: I. Ion emitter

    Energy Technology Data Exchange (ETDEWEB)

    Astrelin, V. T., E-mail: V.T.Astrelin@inp.nsk.su; Kotelnikov, I. A. [Russian Academy of Sciences, Budker Institute of Nuclear Physics, Siberian Branch (Russian Federation)

    2017-02-15

    Emission of positively charged ions from a plasma emitter irradiated by a counterpropagating electron beam is studied theoretically. A bipolar diode with a plasma emitter in which the ion temperature is lower than the electron temperature and the counter electron flow is extracted from the ion collector is calculated in the one-dimensional model. An analog of Bohm’s criterion for ion emission in the presence of a counterpropagating electron beam is derived. The limiting density of the counterpropagating beam in a bipolar diode operating in the space-charge-limited-emission regime is calculated. The full set of boundary conditions on the plasma emitter surface that are required for operation of the high-current optics module in numerical codes used to simulate charged particle sources is formulated.

  16. Recent Progress in Piezoelectric Conversion and Energy Harvesting Using Nonlinear Electronic Interfaces and Issues in Small Scale Implementation

    Directory of Open Access Journals (Sweden)

    Daniel Guyomar

    2011-06-01

    Full Text Available This paper aims at providing an up-to-date review of nonlinear electronic interfaces for energy harvesting from mechanical vibrations using piezoelectric coupling. The basic principles and the direct application to energy harvesting of nonlinear treatment of the output voltage of the transducers for conversion enhancement will be recalled, and extensions of this approach presented. Latest advances in this field will be exposed, such as the use of intermediate energy tanks for decoupling or initial energy injection for conversion magnification. A comparative analysis of each of these techniques will be performed, highlighting the advantages and drawbacks of the methods, in terms of efficiency, performance under several excitation conditions, complexity of implementation and so on. Finally, a special focus of their implementation in the case of low voltage output transducers (as in the case of microsystems will be presented.

  17. Elementary framework for cold field emission from quantum-confined, non-planar emitters

    Energy Technology Data Exchange (ETDEWEB)

    Patterson, A. A., E-mail: apatters@mit.edu; Akinwande, A. I. [Department of Electrical Engineering and Computer Science, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, USA and Microsystems Technology Laboratories, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States)

    2015-05-07

    For suitably small field emitters, the effects of quantum confinement at the emitter tip may have a significant impact on the emitter performance and total emitted current density (ECD). Since the geometry of a quantum system uniquely determines the magnitude and distribution of its energy levels, a framework for deriving ECD equations from cold field electron emitters of arbitrary geometry and dimensionality is developed. In the interest of obtaining semi-analytical ECD equations, the framework is recast in terms of plane wave solutions to the Schrödinger equation via the use of the Jeffreys-Wentzel-Kramers-Brillouin approximation. To demonstrate the framework's consistency with our previous work and its capabilities in treating emitters with non-planar geometries, ECD equations were derived for the normally unconfined cylindrical nanowire (CNW) and normally confined (NC) CNW emitter geometries. As a function of the emitter radius, the NC CNW emitter ECD profile displayed a strong dependence on the Fermi energy and had an average ECD that exceeded the Fowler-Nordheim equation for typical values of the Fermi energy due to closely spaced, singly degenerate energy levels (excluding electron spin), comparatively large electron supply values, and the lack of a transverse, zero-point energy. Such characteristics suggest that emitters with non-planar geometries may be ideal for emission from both an electron supply and electrostatics perspective.

  18. Nature of Electronically Excited States of Organic Compounds and Processes of Nonradiative Conversion

    Science.gov (United States)

    Mayer, G. V.; Plotnikov, V. G.; Artyukhov, V. Ya.

    2016-08-01

    Models of quantum-chemical calculation of rate constants for internal processes and intersystem crossing in polyatomic molecules are considered. The influence of the nature of electronically excited states in organic compounds is investigated. It is shown that the explicit allowance for the nature of wave functions of electronic states for estimation of electronic matrix elements of nonadiabaticity operators and spin-orbit interaction allows photophysical processes in organic compounds to be considered in detail.

  19. Reduction of bend-plane emittance growth in a chicane pulse compressor

    CERN Document Server

    Dowell, D H

    1999-01-01

    Emittance preservation in beam bending systems is vitally important in the production of bright, high-current electron microbunches. Generally, the emittance increase occurs in the bend plane and results from changes in the microbunch energy distribution as the beam transits the bend. This redistribution of electron energies increases the beam's divergence, and hence the emittance, by spoiling the achromatic transport of the bending system. In this paper we investigate the correlated emittance growth in a three dipole chicane compressor due to coherent synchrotron radiation (CSR). Breaking the symmetry of the chicane partially cancels the CSR-induced correlation thereby reducing the bend plane emittance growth. The consequences of this emittance compensation scheme are discussed.

  20. Dose conversion coefficients for electron exposure of the human eye lens: calculations including a whole body phantom.

    Science.gov (United States)

    Behrens, R

    2013-07-01

    In this work, conversion coefficients from electron fluence to absorbed dose to the eye lens were calculated using Monte Carlo simulations based on a detailed stylised eye model and a very simple but whole body phantom. These data supersede and complement data published earlier based on the simulation of only a single stylised eye. The new data differ from the old ones by not more than 3, 4, 7 and 16 % for angles of radiation incidence of α=0°, 15°, 30° and 45°, respectively, due to the inclusion of the whole body phantom. The data presented in the present work also complement those of a recent report of the International Commission on Radiological Protection (ICRP) (ICRP Publication 116), where conversion coefficients from electron fluence to absorbed dose to the lens of the eye are shown for solely 0°, 180° and isotropic radiation incidence (but for a much broader range of energies). In this article, values are provided for angles of incidence of 0° up to 180° in steps of 15° and for rotational geometry; no systematic deviation was observed from the values given in ICRP Publication 116 for 0° (based on the application of a bare eye) and 180° (based on the application of a voxel whole body phantom). Data are given for monoenergetic electrons from 0.1 up to 10 MeV and for a broad parallel beam geometry in vacuum.

  1. Efficient spin-to-charge conversion in the 2D electron liquid at the LAO/STO interface

    Science.gov (United States)

    Chauleau, J.-Y.; Boselli, M.; Gariglio, S.; Weil, R.; de Loubens, G.; Triscone, J.-M.; Viret, M.

    2016-10-01

    Spin-to-charge conversion using the inverse Rashba-Edelstein effect is measured in the 2D electron liquid existing at the interface between LaAlO3 and SrTiO3. The effect is found to be larger than in the highly Rashba split Bi/Ag interface which we attribute to an amplifying effect due to a long carrier's momentum lifetime. The explanation is supported by temperature measurements and the Rashba field is also shown to be anisotropic in the interface plane.

  2. DC-SC Photoinjector with Low Emittance at Peking University

    CERN Document Server

    Xiang Rong; Hao, J; Huang, Senlin; Lu Xiang Yang; Quan, Shengwen; Zhang, Baocheng; Zhao, Kui

    2005-01-01

    High average power Free Electron Lasers require the high quality electron beams with the low emittance and the sub-picosecond bunches. The design of DC-SC photoinjector, directly combining a DC photoinjector with an SRF cavity, can produce high average current beam with moderate bunch charge and high duty factor. Because of the DC gun, the emittance increases quickly at the beginning, so a carefully design is needed to control that. In this paper, the simulation of an upgraded design has been done to lower the normalized emittance below 1.5mm·mrad. The photoinjector consists of a DC gap and a 2+1/2-cell SRF cavity, and it is designed to produce 4.2 MeV electron beams at 100pC bunch charge and 81.25MHz repetition rate (8 mA average current).

  3. Hafnia-plugged microcavities for thermal stability of selective emitters

    Science.gov (United States)

    Lee, Heon-Ju; Smyth, Katherine; Bathurst, Stephen; Chou, Jeffrey; Ghebrebrhan, Michael; Joannopoulos, John; Saka, Nannaji; Kim, Sang-Gook

    2013-06-01

    Two-dimensional arrays of micro-cavities effectively control photon motion and selectively emit radiation tailored to the preferred bandgap of photovoltaic (PV) cells, thus enhancing the efficiency of thermophotovoltaic energy conversion. At the high operating temperatures, however, the micro- and nano-patterned structures of the selective emitters quickly lose their integrity--obliterating the tight tolerances required for precise spectral control. Even if oxidation, recrystallization, and grain growth could be avoided with single-crystal tungsten (W) selective emitters with vacuum packaging, surface diffusion, evaporation, and re-condensation are not avoidable in long-term operation at high temperatures. The concept of a planar array of plugged micro-cavities to suppress the curvature-dependent thermal degradation modes is proposed and tested. Based on scale-accelerated failure tests of silicon devices, the lifetime of W selective emitters operating at 1100 K is estimated to be at least 30 yr.

  4. Laser Process for Selective Emitter Silicon Solar Cells

    Directory of Open Access Journals (Sweden)

    G. Poulain

    2012-01-01

    Full Text Available Selective emitter solar cells can provide a significant increase in conversion efficiency. However current approaches need many technological steps and alignment procedures. This paper reports on a preliminary attempt to reduce the number of processing steps and therefore the cost of selective emitter cells. In the developed procedure, a phosphorous glass covered with silicon nitride acts as the doping source. A laser is used to open locally the antireflection coating and at the same time achieve local phosphorus diffusion. In this process the standard chemical etching of the phosphorous glass is avoided. Sheet resistance variation from 100 Ω/sq to 40 Ω/sq is demonstrated with a nanosecond UV laser. Numerical simulation of the laser-matter interaction is discussed to understand the dopant diffusion efficiency. Preliminary solar cells results show a 0.5% improvement compared with a homogeneous emitter structure.

  5. Spin-to-Orbital Angular Momentum Conversion and Spin-Polarization Filtering in Electron Beams

    CERN Document Server

    Karimi, Ebrahim; Grillo, Vincenzo; Santamato, Enrico; 10.1103/PhysRevLett.108.044801

    2012-01-01

    We propose the design of a space-variant Wien filter for electron beams that induces a spin half-turn and converts the corresponding spin angular momentum variation into orbital angular momentum of the beam itself by exploiting a geometrical phase arising in the spin manipulation. When applied to a spatially coherent input spin-polarized electron beam, such a device can generate an electron vortex beam, carrying orbital angular momentum. When applied to an unpolarized input beam, the proposed device, in combination with a suitable diffraction element, can act as a very effective spin-polarization filter. The same approach can also be applied to neutron or atom beams.

  6. Observation of negative differential transconductance in tunneling emitter bipolar transistors

    Science.gov (United States)

    van Veenhuizen, Marc J.; Locatelli, Nicolas; Moodera, Jagadeesh; Chang, Joonyeon

    2009-08-01

    We report on measurement of negative differential transconductance (NDTC) of iron (Fe)/magnesium-oxide (MgO)/silicon tunneling emitter NPN bipolar transistors. Device simulations reveal that the NDTC is a consequence of an inversion layer at the tunneling-oxide/P-silicon interface for low base voltages. Electrons travel laterally through the inversion layer into the base and give rise to an increase in collector current. The NDTC results from the recombination of those electrons at the interface between emitter and base contact which is dependent on the base voltage. For larger base voltages, the inversion layer disappears marking the onset of normal bipolar transistor behavior.

  7. Beam emittance reduction during operation of Indus-2

    Energy Technology Data Exchange (ETDEWEB)

    Fakhri, Ali Akbar, E-mail: fakhri@rrcat.gov.in; Kant, Pradeep; Ghodke, A. D.; Singh, Gurnam [Raja Ramanna Centre for Advanced Technology, Indore 452 013 (India)

    2015-11-15

    Indus-2 storage ring is a 2.5 GeV third generation synchrotron radiation source. This source was commissioned using a moderate optics. Beam injection was accomplished using an off momentum electron beam to avoid difficulties faced in storage of beam at 550 MeV. The injection procedure and relevant beam dynamical studies are discussed. The switch over from the moderate optics to low emittance optics is done at 2.5 GeV after storing the electron beam. The procedure evolved to reduce the beam emittance and its implementation during the operation is discussed.

  8. Recent progress of carbon nanotube field emitters and their application.

    Science.gov (United States)

    Seelaboyina, Raghunandan; Choi, Wonbong

    2007-01-01

    The potential of utilizing carbon nanotube field emission properties is an attractive feature for future vacuum electronic devices including: high power microwave, miniature x-ray, backlight for liquid crystal displays and flat panel displays. Their high emission current, nano scale geometry, chemical inertness and low threshold voltage for emission are attractive features for the field emission applications. In this paper we review the recent developments of carbon nanotube field emitters and their device applications. We also discuss the latest results on field emission current amplification achieved with an electron multiplier microchannel plate, and emission performance of multistage field emitter based on oxide nanowire operated in poor vacuum.

  9. Beta emitters and radiation protection

    DEFF Research Database (Denmark)

    Jødal, Lars

    2009-01-01

    , and 90Y, using data from a freely available database. Bremsstrahlung yields were calculated for 90Y shielded by lead, aluminium, or perspex. Bremsstrahlung spectrum from 90Y shielded by perspex was measured, and attenuation of spectrum by lead was calculated. Whole-body and finger doses to persons...... preparing 90Y-Zevalin were measured. CONCLUSIONS. Good laboratory practice is important to keep radiation doses low. To reduce bremsstrahlung, 90Y should not be shielded by lead but instead perspex (10 mm) or aluminium (5 mm). Bremsstrahlung radiation can be further reduced by adding a millimetre of lead......BACKGROUND. Beta emitters, such as 90Y, are increasingly being used for cancer treatment. However, beta emitters demand other precautions than gamma emitters during preparation and administration, especially concerning shielding. AIM. To discuss practical precautions for handling beta emitters...

  10. The 3D-tomography of the nano-clusters formed by Fe-coating and annealing of diamond films for enhancing their surface electron field emitters

    Directory of Open Access Journals (Sweden)

    Huang-Chin Chen

    2012-09-01

    Full Text Available The Fe-coating and H2-annealed processes markedly increased the conductivity and enhanced the surface electron field emission (s-EFE properties for the diamond films. The enhancement on the s-EFE properties for the diamond films is presumably owing to the formation of nano-graphite clusters on the surface of the films via the Fe-to-diamond interaction. However, the extent of enhancement varied with the granular structure of the diamond films. For the microcrystalline (MCD films, the s-EFE process can be turned on at (E0MCD = 1.9 V/μm, achieving a large s-EFE current density of (JeMCD = 315 μA/cm2 at an applied field of 8.8 V/μm. These s-EFE properties are markedly better than those for Fe-coated/annealed ultrananocrystalline diamond (UNCD films with (E0UNCD = 2.0 V/μm and (JeUNCD = 120 μA/cm2. The transmission electron microscopy showed that the nano-graphite clusters formed an interconnected network for MCD films that facilitated the electron transport more markedly, as compared with the isolated nano-graphitic clusters formed at the surface of the UNCD films. Therefore, the Fe-coating/annealing processes improved the s-EFE properties for the MCD films more markedly than that for the UNCD films. The understanding on the distribution of the nano-clusters is of critical importance in elucidating the authentic factor that influences the s-EFE properties of the diamond films. Such an understanding is possible only through the 3D-tomographic investigations.

  11. P.U.R.E. (purposeful, unambiguous, respectful, and effective) Conversations and electronic fetal monitoring: gaining consensus and collaboration.

    Science.gov (United States)

    Veltman, Larry; Larison, Kristine

    2010-11-01

    A revised nomenclature regarding electronic fetal heart rate monitoring was accepted at a National Institute of Child Health and Human Development consensus conference in 2008. At the heart of patient safety are communication strategies that enhance teamwork and collaboration between health care professionals. Communications is a complex 2-way process that involves more than transfer of factual information. P.U.R.E. (purposeful, unambiguous, respectful, and effective) Conversations in Obstetrics is an acronym that helps facilitate this communication process in perinatal care. P.U.R.E. stands for purposeful, unambiguous, respectful, and effective. The P.U.R.E. Conversations approach involves refinement of the mental processes associated with delivering the message, delivery of the message with data, accuracy, and direct requests for action, attention to relationships and behaviors between the communicating parties, and real-time assessment of the effectiveness of the communication. When the new electronic monitoring nomenclature is combined with an effective communication tool, one could expect to see a reduction in communication failures that could lead to adverse perinatal outcomes.

  12. Water-soluble phosphine-protected Au9 clusters: Electronic structures and nuclearity conversion via phase transfer

    Science.gov (United States)

    Yao, Hiroshi; Tsubota, Shuhei

    2017-08-01

    In this article, isolation, exploration of electronic structures, and nuclearity conversion of water-soluble triphenylphosphine monosulfonate (TPPS)-protected nonagold (Au9) clusters are outlined. The Au9 clusters are obtained by the reduction of solutions containing TPPS and HAuCl4 and subsequent electrophoretic fractionation. Mass spectrometry and elemental analysis reveal the formation of [Au9(TPPS)8]5- nonagold cluster. UV-vis absorption and magnetic circular dichroism (MCD) spectra of aqueous [Au9(TPPS)8]5- are quite similar to those of [Au9(PPh3)8]3+ in organic solvent, so the solution-phase structures are likely similar for both systems. Simultaneous deconvolution analysis of absorption and MCD spectra demonstrates the presence of some weak electronic transitions that are essentially unresolved in the UV-vis absorption. Quantum chemical calculations for a model compound [Au9(pH3)8]3+ show that the possible (solution-phase) skeletal structure of the nonagold cluster has D2h core symmetry rather than C4-symmetrical centered crown conformation, which is known as the crystal form of the Au9 compound. Moreover, we find a new nuclearity conversion route from Au9 to Au8; that is, phase transfer of aqueous [Au9(TPPS)8]5- into chloroform using tetraoctylammonium bromide yields [Au8(TPPS)8]6- clusters in the absence of excess phosphine.

  13. The Conversion of CESR to Operate as the Test Accelerator, CesrTA, Part 3: Electron Cloud Diagnostics

    CERN Document Server

    Billing, M G; Crittendan, J A; Greenwald, S; Li, Y; Meller, R E; Strohman, C R; Sikora, J P; Calvey, J R; Palmer, M A

    2015-01-01

    Cornell's electron/positron storage ring (CESR) was modified over a series of accelerator shutdowns beginning in May 2008, which substantially improves its capability for research and development for particle accelerators. CESR's energy span from 1.8 to 5.6 GeV with both electrons and positrons makes it ideal for the study of a wide spectrum of accelerator physics issues and instrumentation related to present light sources and future lepton damping rings. Additionally a number of these are also relevant for the beam physics of proton accelerators. This paper is the third in a series of four describing the the conversion of CESR to the test accelerator, CesrTA. The first two papers discuss the overall plan for the conversion of the storage ring to an instrument capable of studying advanced accelerator physics issues and the details of the vacuum system upgrades. This paper focusses on the necessary development of new instrumentation, situated in four dedicated experimental regions, capable of studying such phe...

  14. A New Cost-Effective Multi-Drive Solution based on a Two-Stage Direct Power Electronic Conversion Topology

    DEFF Research Database (Denmark)

    Klumpner, Christian; Blaabjerg, Frede

    2002-01-01

    The matrix converter is a single stage AC/AC converter, which is able to provide sinusoidal PWM output voltages and input currents, inherent bi-directional power flow with no need of bulky DC-capacitors and large line inductors. However, the increased number of active switches (18) and the need o...... shared by many loads, making this topology more cost effective. The functionality of the proposed two-stage multi-drive direct power electronic conversion topology is validated by experiments on a realistic laboratory prototype.......The matrix converter is a single stage AC/AC converter, which is able to provide sinusoidal PWM output voltages and input currents, inherent bi-directional power flow with no need of bulky DC-capacitors and large line inductors. However, the increased number of active switches (18) and the need...... of a protection circuit involving twelve diodes with full voltage/current ratings used only during faulty situations, makes this topology not so attractive. Lately, two stage Direct Power Electronic Conversion (DPEC) topologies have been proposed, providing similar functionality as a matrix converter but allowing...

  15. Nanodiamond Emitters of Single Photons

    Directory of Open Access Journals (Sweden)

    Vlasov I.I.

    2015-01-01

    Full Text Available Luminescence properties of single color centers were studied in nanodiamonds of different origin. It was found that single photon emitters could be realized even in molecularsized diamond (less than 2 nm capable of housing stable luminescent center “silicon-vacancy.” First results on incorporation of single-photon emitters based on luminescent nanodiamonds in plasmonic nanoantennas to enhance the photon count rate and directionality, diminish the fluorescence decay time, and provide polarization selectivity are presented.

  16. Electronic and chemical structure of an organic light emitter embedded in an inorganic wide-bandgap semiconductor: Photoelectron spectroscopy of layered and composite structures of Ir(BPA) and ZnSe

    Science.gov (United States)

    Dimamay, Mariel; Mayer, Thomas; Hadziioannou, Georges; Jaegermann, Wolfram

    2015-05-01

    Luminescent organic phases embedded in conductive inorganic matrices are proposed for hybrid organic-inorganic light-emitting diodes. In this configuration, the organic dye acts as the radiative recombination site for charge carriers injected into the inorganic matrix. Our investigation is aimed at finding a material combination where the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of the organic dye are situated in between the valence and conduction bands of the inorganic matrix in order to promote electron and hole transfer from the matrix to the dye. Bilayer and composite thin films of zinc selenide (ZnSe) and a red iridium complex (Ir(BPA)) organic light emitter were prepared in situ via UHV thermal evaporation technique. The electronic and atomic structures were studied applying X-ray and ultraviolet photoelectron spectroscopies. The measured energy band alignments for the ZnSe/Ir(BPA) bilayer and ZnSe+Ir(BPA) composite reveal that the HOMO and LUMO of the organic dye are positioned in the ZnSe bandgap. For the initial steps of ZnSe deposition on a dye film to form Ir(BPA)/ZnSe bilayers, zinc atoms intercalate into the dye film leaving behind an excess of selenium at the interface that partly reacts with dye molecules. Photoelectron spectroscopy of the composites shows the same species suggesting a similar mechanism. This mechanism leads to composite films with increased content of amorphous phases in the inorganic matrix, thereby affecting its conductivity, as well as to the presence of nonradiative recombination sites provided by the intercalated Zn atoms.

  17. Electronic and chemical structure of an organic light emitter embedded in an inorganic wide-bandgap semiconductor: Photoelectron spectroscopy of layered and composite structures of Ir(BPA) and ZnSe

    Energy Technology Data Exchange (ETDEWEB)

    Dimamay, Mariel [Institute of Materials Science, Darmstadt University of Technology, Alarich-Weiss-Strasse 2, D-64287 Darmstadt (Germany); Laboratoire de Chimie des Polymères Organiques, CNRS, Université de Bordeaux, UMR 5629-16 Avenue Pey-Berland, 33607 Pessac (France); Mayer, Thomas; Jaegermann, Wolfram [Institute of Materials Science, Darmstadt University of Technology, Alarich-Weiss-Strasse 2, D-64287 Darmstadt (Germany); Hadziioannou, Georges [Laboratoire de Chimie des Polymères Organiques, CNRS, Université de Bordeaux, UMR 5629-16 Avenue Pey-Berland, 33607 Pessac (France)

    2015-05-07

    Luminescent organic phases embedded in conductive inorganic matrices are proposed for hybrid organic-inorganic light-emitting diodes. In this configuration, the organic dye acts as the radiative recombination site for charge carriers injected into the inorganic matrix. Our investigation is aimed at finding a material combination where the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of the organic dye are situated in between the valence and conduction bands of the inorganic matrix in order to promote electron and hole transfer from the matrix to the dye. Bilayer and composite thin films of zinc selenide (ZnSe) and a red iridium complex (Ir(BPA)) organic light emitter were prepared in situ via UHV thermal evaporation technique. The electronic and atomic structures were studied applying X-ray and ultraviolet photoelectron spectroscopies. The measured energy band alignments for the ZnSe/Ir(BPA) bilayer and ZnSe+Ir(BPA) composite reveal that the HOMO and LUMO of the organic dye are positioned in the ZnSe bandgap. For the initial steps of ZnSe deposition on a dye film to form Ir(BPA)/ZnSe bilayers, zinc atoms intercalate into the dye film leaving behind an excess of selenium at the interface that partly reacts with dye molecules. Photoelectron spectroscopy of the composites shows the same species suggesting a similar mechanism. This mechanism leads to composite films with increased content of amorphous phases in the inorganic matrix, thereby affecting its conductivity, as well as to the presence of nonradiative recombination sites provided by the intercalated Zn atoms.

  18. Fast and accurate conversion of atomic models into electron density maps

    Directory of Open Access Journals (Sweden)

    Carlos O.S. Sorzano

    2015-03-01

    Full Text Available New image processing methodologies and algorithms have greatly contributed to the signi cant progress in three-dimensional electron microscopy (3DEM of biological complexes we have seen over the last decades. Naturally, the availability of accurate procedures for the objective testing of new algorithms is a crucial requirement for the further advancement of the eld. A good and accepted testing work ow involves the generation of realistic 3DEM-like maps of biological macromolecules from which some measure of ground truth can be derived, ideally because their 3D atomic structure is already known. In this work we propose a very accurate generation of maps using atomic form factors for electron scattering. We thoroughly review current approaches in the eld, quantitatively demonstrating the bene ts of the new methodology. Additionally, we study a concrete example of the use of this approach for hypothesis testing in 3D Electron Microscopy.

  19. TDDFT Study of the Electronic Structure, Absorption and Emission Spectra of the Light Emitters of the Amazing Firefly Bioluminescence and Solvation Effects on the Spectra

    Institute of Scientific and Technical Information of China (English)

    REN,Ai-Min; GUO,Jing-Fu; FENG,Ji-Kang; ZOU,Lu-Yi; LI,Zhong-Wei; GODDARD,John,David

    2008-01-01

    The ground and excited state properties of luciferin (LH2) and oxyluciferin (OxyLH2), the bioluminescent chemicals in the firefly, have been characterized using density functional theory (DFT) and time dependent DFT (TDDFT) methods. The effects of solvation on the electronic absorption and emission spectra of luciferin and oxyluciferin were predicted with a self-consistent isodensity polarized continuum model of the solvent using TDDFT.The S0→S1 vertical excitation energies in the gas phase and in water were obtained. Optimizations of the excited state geometries permitted the first predictions of the fluorescence spectra for these biologically important molecules. Shifts in both of the absorption and emission spectra on proceeding from the gas phase to aqueous solution were also predicted.

  20. Visible Spectrum Incandescent Selective Emitter

    Energy Technology Data Exchange (ETDEWEB)

    Sonsight Inc.

    2004-04-30

    The purpose of the work performed was to demonstrate the feasibility of a novel bi-layer selective emitter. Selective emitters are incandescent radiant bodies with emissivities that are substantially larger in a selected part of the radiation spectrum, thereby significantly shifting their radiated spectral distribution from that of a blackbody radiating at the same temperature. The major research objectives involved answering the following questions: (1) What maximum VIS/NIR radiant power and emissivity ratios can be attained at 2650 K? (2) What is the observed emitter body life and how does its performance vary with time? (3) What are the design tradeoffs for a dual heating approach in which both an internally mounted heating coil and electrical resistance self-heating are used? (4) What are the quantitative improvements to be had from utilizing a bi-layer emitter body with a low emissivity inner layer and a partially transmissive outer layer? Two approaches to obtaining selective emissivity were investigated. The first was to utilize large optical scattering within an emitter material with a spectral optical absorption that is much greater within the visible spectrum than that within the NIR. With this approach, an optically thick emitter can radiate almost as if optically thin because essentially, scattering limits the distance below the surface from which significant amounts of internally generated radiation can emerge. The performance of thin emitters was also investigated (for optically thin emitters, spectral emissivity is proportional to spectral absorptivity). These emitters were fabricated from thin mono-layer emitter rods as well as from bi-layer rods with a thin emitter layer mounted on a substrate core. With an initially estimated energy efficiency of almost three times that of standard incandescent bulbs, a number of energy, economic and environmental benefits such as less energy use and cost, reduced CO{sub 2} emissions, and no mercury contamination

  1. A method to measure the nonlinear force caused emittance growth in a RF photoinjector

    Institute of Scientific and Technical Information of China (English)

    Li Zheng-Hong; Yang Zhen-Ping

    2006-01-01

    Based on the multi-slit method, a new method is introduced to measure the non linear force caused emittance growth in a RF photoinjector. It is possible to reconstruct the phase space of a beam under some conditions by the multi-slit method. Based on the reconstructed phase space, besides the emittance, the emittance growth from the distortion of the phase space can also be measured. The emittance growth results from the effects of nonlinear force acting on electron, which is very important for the high quality beam in a RF photoinjector.

  2. The Content of Beginning Special Educators' Conversations with Their Electronic Mentors

    Science.gov (United States)

    Gentry, Roberta

    2016-01-01

    This exploratory study examined the frequency and content of text-based interactions between special education mentors (n = 22) and mentees (n = 50) within the Electronic Mentoring for Student Success Program (eMSS). Perceived outcomes of participants, based on an open ended survey question, were also analyzed. The Interstate Teacher Assessment…

  3. MOSSBAUER-SPECTROSCOPY OF YB-170 THROUGH INTERNAL-CONVERSION OF ELECTRONS

    NARCIS (Netherlands)

    SAWICKI, JA; NIESEN, L

    1993-01-01

    This paper describes the first observation of the Mossbauer scattering for the 84.3 keV gamma-ray transition in ytterbium Yb-170, made by detecting the low-energy electrons emitted after resonant absorption of gamma-rays. The measurements were performed in sideways scattering geometry using a 50 mCi

  4. Surface Analysis of LaB6 Single Crystal Thermionic Emitters

    Science.gov (United States)

    Nakazawa, Masatoshi; Futamoto, Masaaki; Hosoki, Shigeyuki; Usami, Katuhisa

    1980-07-01

    Surface analysis of heated LaB6 thermionic emitter is made by means of Auger electron spectroscopy. Changes in surface state with changing emitter temperature and ambient oxygen pressure are investigated. The emitter temperature is varied from room temperature to 1700°C, and the oxygen pressure from 1× 10-5 Pa to 7× 10-3 Pa. With the increase of temperature the emitter surface passes through four states depending on oxygen pressure, before it reaches a clean state. Among them a state is particularly noteworthy that the emitter surface is covered with a layer of lanthanum oxide just before assuming the clean surface state. A surface state diagram is shown. The optimum conditions of emitter temperature and oxygen gas pressure to exhibit high emission properties are described.

  5. Biofilm structure and its influence on clogging in drip irrigation emitters distributing reclaimed wastewater

    Institute of Scientific and Technical Information of China (English)

    YAN Dazhuang; BAI Zhihui; Mike Rowan; GU Likun; Ren Shumei; YANG Peiling

    2009-01-01

    Using reclaimed wastewater for crop irrigation is a practical alternative to discharge wastewater treatment plant effluents into surface waters.However,biofouling has been identified as a major contributor to emitter clogging in drip irrigation systems distributing reclaimed wastewater.Little is known about the biofilm structure and its influence on clogging in the drip emitter flow path.This study was first to investigate the microbial characteristics of mature biofilms present in the emitters and the effect of flow path structures on the biofilm microbial communities.The analysis of biofilm matrix structure using a scanning electron microscopy (SEM) revealed that particles in the matrix of the biofilm coupled extracellular polysaccharides (EPS) and formed sediment in the emitter flow path.Analysis of biofilm mass including protein,polysaccharide and phospholipid fatty acids (PLFAs) showed that emitter flow path style influenced biofilm community structure and diversity.The correlations of biofilm biomass and discharge reduction after 360 h irrigation were computed and suggest that PFLAs provide the best correlation coefficient.Comparatively,the emitter with the unsymmetrical dentate structure and shorter flow path (Emitter C) had the best anti-clogging capability.By optimizing the dentate structure,the internal flow pattern within the flow path could be enhanced as an important method to control the biofilm within emitter flow path.This study established electron microscope techniques and biochemical microbial analysis methods that may provide a framework for future emitter biofilm studies.

  6. Electrical control of optical emitter relaxation pathways enabled by graphene

    Science.gov (United States)

    Tielrooij, K. J.; Orona, L.; Ferrier, A.; Badioli, M.; Navickaite, G.; Coop, S.; Nanot, S.; Kalinic, B.; Cesca, T.; Gaudreau, L.; Ma, Q.; Centeno, A.; Pesquera, A.; Zurutuza, A.; de Riedmatten, H.; Goldner, P.; García de Abajo, F. J.; Jarillo-Herrero, P.; Koppens, F. H. L.

    2015-03-01

    Controlling the energy flow processes and the associated energy relaxation rates of a light emitter is of fundamental interest and has many applications in the fields of quantum optics, photovoltaics, photodetection, biosensing and light emission. Advanced dielectric, semiconductor and metallic systems have been developed to tailor the interaction between an emitter and its environment. However, active control of the energy flow from an emitter into optical, electronic or plasmonic excitations has remained challenging. Here, we demonstrate in situ electrical control of the relaxation pathways of excited erbium ions, which emit light at the technologically relevant telecommunication wavelength of 1.5 μm. By placing the erbium at a few nanometres distance from graphene, we modify the relaxation rate by more than a factor of three, and control whether the emitter decays into electron-hole pairs, emitted photons or graphene near-infrared plasmons, confined to control of the local density of optical states constitute a new paradigm for active (quantum) photonics and can be applied using any combination of light emitters and two-dimensional materials.

  7. Transverse emittance growth in staged laser-wakefield acceleration

    Directory of Open Access Journals (Sweden)

    T. Mehrling

    2012-11-01

    Full Text Available We present a study on the emittance evolution of electron bunches, externally injected into laser-driven plasma waves using the three-dimensional particle-in-cell (PIC code OSIRIS. Results show order-of-magnitude transverse emittance growth during the injection process, if the electron bunch is not matched to its intrinsic betatron motion inside the wakefield. This behavior is supported by analytic theory reproducing the simulation data to a percent level. The length over which the full emittance growth develops is found to be less than or comparable to the typical dimension of a single plasma module in current multistage designs. In addition, the analytic theory enables the quantitative prediction of emittance degradation in two consecutive accelerators coupled by free-drift sections, excluding this as a scheme for effective emittance-growth suppression, and thus suggests the necessity of beam-matching sections between acceleration stages with fundamental implications on the overall design of staged laser-wakefield accelerators.

  8. Light-Induced Conversion of Chemical Permeability to Enhance Electron and Molecular Transfer in Nanoscale Assemblies

    Energy Technology Data Exchange (ETDEWEB)

    Balgley, Renata; de Ruiter, Graham; Evmenenko, Guennadi; Bendikov, Tatyana; Lahav, Michal; van der Boom, Milko E.

    2016-12-21

    In this paper, we demonstrate how photochemically enhancing the permeability of metal–organic assemblies results in a significant enhancement of the electrochemical activity of metal complexes located within the assembly. The molecular assemblies consist of different layers of redox-active metal complexes ([M(mbpy-py)3][PF6]2; M = Ru or Os) that are separated by redox-inactive spacers consisting of 1,4-bis[2-(4-pyridyl)ethenyl]benzene (BPEB) and PdCl2 of variable thicknesses (0–13.4 nm). UV-irradiation (λ = 254 nm) of our assemblies induces a photochemical reaction in the redox-inactive spacer increasing the permeability of the assembly. The observed increase was evident by trapping organic (nBu4NBF4) and inorganic (NiCl2) salts inside the assemblies, and by evaluating the electrochemical response of quinones absorbed inside the molecular assemblies before and after UV irradiation. The increase in permeability is reflected by higher currents and a change in the directionality of electron transfer, i.e., from mono- to bidirectional, between the redox-active metal complexes and the electrode surface. The supramolecular structure of the assemblies dominates the overall electron transfer properties and overrules possible electron transfer mediated by the extensive π-conjugation of its individual organic components.

  9. Slice emittance measurement for photocathode RF gun with solenoid scanning and RF deflecting cavity

    Science.gov (United States)

    Li, Chen; Huang, WenHui; Du, YingChao; Yan, LiXin; Tang, ChuanXiang

    2011-12-01

    The radiation of high-gain short-wavelength free-electron laser depends on the slice transverse emittance of the electron bunch. This essay introduces the method of slice emittance measurement, and shows the brief setup of this experiment using the solenoid scanning and RF deflecting cavity at Tsinghua University. The preliminary experimental results show that the slice rms emittance of the electron bunch generated by photocathode RF gun has considerable variations along the bunch and is typically less than 0.55 mm mrad for the laser rms radius of 0.4 mm.

  10. Slice emittance measurement for photocathode RF gun with solenoid scanning and RF deflecting cavity

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    The radiation of high-gain short-wavelength free-electron laser depends on the slice transverse emittance of the electron bunch. This essay introduces the method of slice emittance measurement, and shows the brief setup of this experiment using the solenoid scanning and RF deflecting cavity at Tsinghua University. The preliminary experimental results show that the slice rms emittance of the electron bunch generated by photocathode RF gun has considerable variations along the bunch and is typically less than 0.55 mm mrad for the laser rms radius of 0.4 mm.

  11. A hot-electron thermophotonic solar cell demonstrated by thermal up-conversion of sub-bandgap photons.

    Science.gov (United States)

    Farrell, Daniel J; Sodabanlu, Hassanet; Wang, Yunpeng; Sugiyama, Masakazu; Okada, Yoshitaka

    2015-11-06

    The direct conversion of solar energy to electricity can be broadly separated into two main categories: photovoltaics and thermal photovoltaics, where the former utilizes gradients in electrical potential and the latter thermal gradients. Conventional thermal photovoltaics has a high theoretical efficiency limit (84%) but in practice cannot be easily miniaturized and is limited by the engineering challenges of sustaining large (>1,000 K) temperature gradients. Here we show a hot-carrier-based thermophotonic solar cell, which combines the compact nature of photovoltaic devices with the potential to reach the high-efficiency regime of thermal photovoltaics. In the device, a thermal gradient of 500 K is established by hot electrons, under Stokes illumination, rather than by raising the temperature of the material itself. Under anti-Stokes (sub-bandgap) illumination we observe a thermal gradient of ∼20 K, which is maintained by steady-state Auger heating of carriers and corresponds to a internal thermal up-conversion efficiency of 30% between the collector and solar cell.

  12. Enhancement of Electron Transfer in Various Photo-Assisted Oxidation Processes for Nitro-Phenolic Compound Conversion

    Science.gov (United States)

    Khue, Do Ngoc; Lam, Tran Dai; Minh, Do Binh; Loi, Vu Duc; Nam, Nguyen Hoai; Bach, Vu Quang; Van Anh, Nguyen; Van Hoang, Nguyen; Hu'ng, Dao Duy

    2016-08-01

    The present study focuses on photo-assisted advanced oxidation processes (AOPs) with strongly enhanced electron transfer for degradation of nitro-phenolic compounds in aqueous medium. The effectiveness of these processes was estimated based on the pseudo-first order rate constant k determined from high-performance liquid chromatography. The degradation of four different nitro-phenolic compounds was systematically studied using selected AOPs; these four compounds were nitrophenol, dinitrophenol, trinitrophenol and trinitroresorcin. It was observed that the combination of ultraviolet light with hydrogen peroxide H2O2 enhanced and maintained hydroxyl radicals, and therefore increased the conversion yield of organic pollutants. These AOPs provided efficient and green removal of stable organic toxins found in a wide range of industrial wastewater.

  13. A direct current rectification scheme for microwave space power conversion using traveling wave electron acceleration

    Science.gov (United States)

    Manning, Robert M.

    1993-01-01

    The formation of the Vision-21 conference held three years ago allowed the present author to reflect and speculate on the problem of converting electromagnetic energy to a direct current by essentially reversing the process used in traveling wave tubes that converts energy in the form of a direct current to electromagnetic energy. The idea was to use the electric field of the electromagnetic wave to produce electrons through the field emission process and accelerate these electrons by the same field to produce an electric current across a large potential difference. The acceleration process was that of cyclotron auto-resonance. Since that time, this rather speculative ideas has been developed into a method that shows great promise and for which a patent is pending and a prototype design will be demonstrated in a potential laser power beaming application. From the point of view of the author, a forum such as Vision-21 is becoming an essential component in the rather conservative climate in which our initiatives for space exploration are presently formed. Exchanges such as Vision-21 not only allows us to deviate from the 'by-the-book' approach and rediscover the ability and power in imagination, but provides for the discussion of ideas hitherto considered 'crazy' so that they may be given the change to transcend from the level of eccentricity to applicability.

  14. Development of an Accommodation-Dependent Eye Model and Studying the Effects of Accommodation on Electron and Proton Dose Conversion Coefficients

    Directory of Open Access Journals (Sweden)

    Alireza Vejdani-Noghreiyan

    2016-06-01

    Full Text Available Introduction International Commission on Radiological Protection (ICRP has provided a comprehensive discussion on threshold dose for radiation-induced cataract in ICRP publication 116. Accordingly, various parts of the eye lens have different radio-sensitivities. Recently, some studies have been performed to develop a realistic eye model with the aim of providing accurate estimation of fluence-to-dose conversion coefficients for different parts of the eye. However, the effect of accommodation, which changes the lens shape and pupil size, on dose conversion coefficients has not been considered yet. In this study, we purport to develop an accommodation-dependent eye model and to study the effects of accommodation on the electron and proton fluence-to-dose conversion coefficients. Materials and Methods Herein, a modified eye model was developed by considering the effects of accommodation on the lens shape and pupil size. In addition, MCNPX 2.6 Monte Carlo transport code was used to calculate the effects of  eye lens accommodation on electron and proton fluence-to-dose conversion coefficients. Results Calculation of dose conversion coefficients demonstrated that the accommodation causes up to 40% discrepancy for fluence-to-dose conversion coefficients of electrons in the range of 600 to 800 keV, which is due to the change of eye lens shape during the accommodation of the eye. Conclusion Since the accommodation of the eye change the lens shape and pupil size, it has considerable effect on fluence-to-dose conversion coefficients of electrons at some ranges of incident particle energies that should be considered in simulation. However, the fluctuation of dose conversion coefficients of protons is negligible.

  15. Development and characterization of a rare earth emitter for a thermophotovoltaic power generator

    Energy Technology Data Exchange (ETDEWEB)

    Durisch, W.; Panitz, J.C. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1997-06-01

    Energy conversion based on thermophotovoltaic (TPV) methods has recently attracted renewed interest. Efforts at PSI are directed towards the development of a modular TPV system based on existing technology to demonstrate the feasibility of this method. Here, we report first results obtained with a prototype TPV generator based upon a modified rare earth emitter, a heat reflecting filter and commercial silicon solar cells. The preparation of the modified emitter is described, and first results of spectroscopic and electrical characterization of the TPV system are presented. The introduction of the modified emitter leads to an efficiency gain of 30-40%. (author) 3 figs., 4 refs.

  16. Brightness limitations of cold field emitters caused by Coulomb interactions

    NARCIS (Netherlands)

    Cook, B.J.; Verduin, T.; Hagen, C.W.; Kruit, P.

    2010-01-01

    Emission theory predicts that high brightness cold field emitters can enhance imaging in the electron microscope. This (neglecting chromatic aberration) is because of the large (coherent) probe current available from a high brightness source and is based on theoretically determined values of reduced

  17. Conversion of electronic to magnonic spin current at a heavy-metal magnetic-insulator interface

    Science.gov (United States)

    Wang, Xi-guang; Li, Zhi-xiong; Zhou, Zhen-wei; Nie, Yao-zhuang; Xia, Qing-lin; Zeng, Zhong-ming; Chotorlishvili, L.; Berakdar, J.; Guo, Guang-hua

    2017-01-01

    Electronic spin current is convertible to magnonic spin current via the creation or annihilation of thermal magnons at the interface of a magnetic insulator and a metal with a strong spin-orbital coupling. So far this phenomenon was evidenced in the linear regime. Based on analytical and full-fledged numerical results for the nonlinear regime we demonstrate that the generated thermal magnons or magnonic spin current in the insulator is asymmetric with respect to the charge current direction in the metal and exhibits a nonlinear dependence on the charge current density, which is explained by the tuning effect of the spin Hall torque and the magnetization damping. The results are also discussed in light of, and are in line with, recent experiments pointing to a new way of nonlinear manipulation of spin with electrical means.

  18. Electronic and vibrational spectroscopy of intermediates in methane-to-methanol conversion by CoO+

    Science.gov (United States)

    Altinay, Gokhan; Kocak, Abdulkadir; Silva Daluz, Jennifer; Metz, Ricardo B.

    2011-08-01

    At room temperature, cobalt oxide cations directly convert methane to methanol with high selectivity but very low efficiency. Two potential intermediates of this reaction, the [HO-Co-CH3]+ insertion intermediate and [H2O-Co=CH2]+ aquo-carbene complex are produced in a laser ablation source and characterized by electronic and vibrational spectroscopy. Reaction of laser-ablated cobalt cations with different organic precursors seeded in a carrier gas produces the intermediates, which subsequently expand into vacuum and cool. Ions are extracted into a time-of-flight mass spectrometer and spectra are measured via photofragment spectroscopy. Photodissociation of [HO-Co-CH3]+ in the visible and via infrared multiple photon dissociation (IRMPD) makes only Co+ + CH3OH, while photodissociation of [H2O-Co=CH2]+ produces CoCH2+ + H2O. The electronic spectrum of [HO-Co-CH3]+ shows progressions in the excited state Co-C stretch (335 cm-1) and O-Co-C bend (90 cm-1); the IRMPD spectrum gives νOH = 3630 cm-1. The [HO-Co-CH3]+(Ar) complex has been synthesized and its vibrational spectrum measured in the O-H stretching region. The resulting spectrum is sharper than that obtained via IRMPD and gives νOH = 3642 cm-1. Also, an improved potential energy surface for the reaction of CoO+ with methane has been developed using single point energies calculated by the CBS-QB3 method for reactants, intermediates, transition states and products.

  19. Elucidating energy and electron transfer dynamics within molecular assemblies for solar energy conversion

    Science.gov (United States)

    Morseth, Zachary Aaron

    The use of sunlight to make chemical fuels (i.e. solar fuels) is an attractive approach in the quest to develop sustainable energy sources. Using nature as a guide, assemblies for artificial photosynthesis will need to perform multiple functions. They will need to be able to harvest light across a broad region of the solar spectrum, transport excited-state energy to charge-separation sites, and then transport and store redox equivalents for use in the catalytic reactions that produce chemical fuels. This multifunctional behavior will require the assimilation of multiple components into a single macromolecular system. A wide variety of different architectures including porphyrin arrays, peptides, dendrimers, and polymers have been explored, with each design posing unique challenges. Polymer assemblies are attractive due to their relative ease of production and facile synthetic modification. However, their disordered nature gives rise to stochastic dynamics not present in more ordered assemblies. The rational design of assemblies requires a detailed understanding of the energy and electron transfer events that follow light absorption, which can occur on timescales ranging from femtoseconds to hundreds of microseconds, necessitating the use of sophisticated techniques. We have used a combination of time-resolved absorption and emission spectroscopies with observation times that span nine orders of magnitude to follow the excited-state evolution within single-site and polymer-based molecular assemblies. We complement experimental observations with electronic structure calculations, molecular dynamics simulations, and kinetic modeling to develop a microscopic view of these dynamics. This thesis provides an overview of work on single-site molecular assemblies and polymers decorated with pendant chromophores, both in solution and on surfaces. This work was made possible through extensive collaboration with Dr. Kirk Schanze's and Dr. John Reynolds' research groups who

  20. Thermal emittance and response time of a cesium antimonide photocathode

    Science.gov (United States)

    Cultrera, Luca; Bazarov, Ivan; Bartnik, Adam; Dunham, Bruce; Karkare, Siddharth; Merluzzi, Richard; Nichols, Matthew

    2011-10-01

    Measurements of the intrinsic emittance and response time of a Cs3Sb photocathode are presented. The emittance is obtained with a solenoid scan technique using a high voltage dc photoemission gun. Photoemission response time is evaluated using a RF deflecting cavity synchronized to a picosecond laser pulse train. We find that Cs3Sb has both small mean transverse energy, 160 ± 10 meV at 532 nm laser wavelength, and a prompt response time (below the resolution of our measurement) making it a suitable material for high brightness electron photoinjectors.

  1. Emittances Studies at the Fermilab/NICADD Photoinjector Laboratory

    CERN Document Server

    Tikhoplav, Rodion; Melissinos, A C; Regis-Guy Piot, Philippe

    2005-01-01

    The Fermilab/NICADD photoinjector incorporates an L-band rf-gun capable of generating 1-10 nC bunches. The bunches are then accelerated to 16 MeV with a TESLA superconducting cavity. In the present paper we present parametric studies of transverse emittances and energy spread for a various operating points of the electron source (RF-gun E-field, laser length and spot size, and solenoid settings). We especially study the impact, on transverse emittance, of Gaussian and Plateau temporal distribution of the photocathode drive-laser.

  2. Emittance of short-pulsed high-current ion beams formed from the plasma of the electron cyclotron resonance discharge sustained by high-power millimeter-wave gyrotron radiation

    Science.gov (United States)

    Razin, S.; Zorin, V.; Izotov, I.; Sidorov, A.; Skalyga, V.

    2014-02-01

    We present experimental results on measuring the emittance of short-pulsed (≤100 μs) high-current (80-100 mA) ion beams of heavy gases (Nitrogen, Argon) formed from a dense plasma of an ECR source of multiply charged ions (MCI) with quasi-gas-dynamic mode of plasma confinement in a magnetic trap of simple mirror configuration. The discharge was created by a high-power (90 kW) pulsed radiation of a 37.5-GHz gyrotron. The normalized emittance of generated ion beams of 100 mA current was (1.2-1.3) π mm mrad (70% of ions in the beams). Comparing these results with those obtained using a cusp magnetic trap, it was concluded that the structure of the trap magnetic field lines does not exert a decisive influence on the emittance of ion beams in the gas-dynamic ECR source of MCI.

  3. Group-III Nitride Field Emitters

    Science.gov (United States)

    Bensaoula, Abdelhak; Berishev, Igor

    2008-01-01

    Field-emission devices (cold cathodes) having low electron affinities can be fabricated through lattice-mismatched epitaxial growth of nitrides of elements from group III of the periodic table. Field emission of electrons from solid surfaces is typically utilized in vacuum microelectronic devices, including some display devices. The present field-emission devices and the method of fabricating them were developed to satisfy needs to reduce the cost of fabricating field emitters, make them compatible with established techniques for deposition of and on silicon, and enable monolithic integration of field emitters with silicon-based driving circuitry. In fabricating a device of this type, one deposits a nitride of one or more group-III elements on a substrate of (111) silicon or other suitable material. One example of a suitable deposition process is chemical vapor deposition in a reactor that contains plasma generated by use of electron cyclotron resonance. Under properly chosen growth conditions, the large mismatch between the crystal lattices of the substrate and the nitride causes strains to accumulate in the growing nitride film, such that the associated stresses cause the film to crack. The cracks lie in planes parallel to the direction of growth, so that the growing nitride film becomes divided into microscopic growing single-crystal columns. The outer ends of the fully-grown columns can serve as field-emission tips. By virtue of their chemical compositions and crystalline structures, the columns have low work functions and high electrical conductivities, both of which are desirable for field emission of electrons. From examination of transmission electron micrographs of a prototype device, the average column width was determined to be about 100 nm and the sharpness of the tips was determined to be characterized by a dimension somewhat less than 100 nm. The areal density of the columns was found to about 5 x 10(exp 9)/sq cm . about 4 to 5 orders of magnitude

  4. Combustion powered thermophotovoltaic emitter system

    Energy Technology Data Exchange (ETDEWEB)

    McHenry, R.S. [Naval Academy, Annapolis, MD (United States). Naval Architecture, Ocean and Marine Engineering

    1995-07-01

    The US Naval Academy (USNA) has recently completed an engineering design project for a high temperature thermophotovoltaic (TPV) photon emitter. The final apparatus was to be portable, completely self contained, and was to incorporate cycle efficiency optimization such as exhaust stream recuperation. Through computer modeling and prototype experimentation, a methane fueled emitter system was designed from structural ceramic materials to fulfill the high temperature requirements necessary for high system efficiency. This paper outlines the engineering design process, discusses obstacles and solutions encountered, and presents the final design.

  5. Auger electron emitter against multiple myeloma - targeted endo-radio-therapy with {sup 125}I-labeled thymidine analogue 5-iodo-4'-thio-2'-deoxyuridine

    Energy Technology Data Exchange (ETDEWEB)

    Morgenroth, Agnieszka, E-mail: amorgenroth@ukaachen.de [Nuclear Medicine Clinic, University Ulm, Albert-Einstein-Allee 23, D-89081 Ulm (Germany); Nuclear Medicine Clinic, University Aachen, RWTH, Pauwelsstrasse 30, D-52074 Aachen (Germany); Dinger, Cornelia; Zlatopolskiy, Boris D.; Al-Momani, Ehab; Glatting, Gerhard [Nuclear Medicine Clinic, University Ulm, Albert-Einstein-Allee 23, D-89081 Ulm (Germany); Mottaghy, Felix M. [Nuclear Medicine Clinic, University Aachen, RWTH, Pauwelsstrasse 30, D-52074 Aachen (Germany); Reske, Sven N. [Nuclear Medicine Clinic, University Ulm, Albert-Einstein-Allee 23, D-89081 Ulm (Germany)

    2011-10-15

    Introduction: Multiple myeloma (MM) is a plasma cell malignancy characterized by accumulation of malignant, terminally differentiated B cells in the bone marrow. Despite advances in therapy, MM remains an incurable disease. Novel therapeutic approaches are, therefore, urgently needed. Auger electron-emitting radiopharmaceuticals are attractive for targeted nano-irradiation therapy, given that DNA of malignant cells is selectively addressed. Here we evaluated the antimyeloma potential of the Auger electron-emitting thymidine analogue {sup 125}I-labeled 5-iodo-4'-thio-2'-deoxyuridine ([{sup 125}I]ITdU). Methods: Cellular uptake and DNA incorporation of [{sup 125}I]ITdU were determined in fluorodeoxyuridine-pretreated KMS12BM, U266, dexamethasone-sensitive MM1.S and -resistant MM1.R cell lines. The effect of stimulation with interleukin 6 (IL6) or insulin-like growth factor 1 (IGF1) on the intracellular incorporation of [{sup 125}I]ITdU was investigated in cytokine-sensitive MM1.S and MM1.R cell lines. Apoptotic cells were identified using Annexin V. Cleavage of caspase 3 and PARP was visualized by Western blot. DNA fragmentation was investigated using laddering assay. Therapeutic efficiency of [{sup 125}I]ITdU was proven by clonogenic assay. Results: [{sup 125}I]ITdU was shown to be efficiently incorporated into DNA of malignant cells, providing a promising mechanism for delivering highly toxic Auger radiation emitters into tumor DNA. [{sup 125}I]ITdU had a potent antimyeloma effect in cell lines representing distinct disease stages and, importantly, in cell lines sensitive or resistant to the conventional therapeutic agent, but was not toxic for normal plasma and bone marrow stromal cells. Furthermore, [{sup 125}I]ITdU abrogated the protective actions of IL6 and IGF1 on MM cells. [{sup 125}I]ITdU induced massive damage in the DNA of malignant plasma cells, which resulted in efficient inhibition of clonogenic growth. Conclusion: These studies may provide a

  6. Emittance growth in the DARHT Axis-II Downstream Transport

    Energy Technology Data Exchange (ETDEWEB)

    Ekdahl, Jr., Carl August [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Schulze, Martin E. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-04-14

    Using a particle-in-cell (PIC) code, we investigated the possibilities for emittance growth through the quadrupole magnets of the system used to transport the high-current electron beam from an induction accelerator to the bremsstrahlung converter target used for flash radiography. We found that even highly mismatched beams exhibited little emittance growth (< 6%), which we attribute to softening of their initial hard edge current distributions. We also used this PIC code to evaluate the accuracy of emittance measurements using a solenoid focal scan following the quadrupole magnets. If the beam is round after the solenoids, the simulations indicate that the measurement is highly accurate, but it is substantially inaccurate for elliptical beams

  7. Synchrotron radiation-based Mössbauer spectra of {sup 174}Yb measured with internal conversion electrons

    Energy Technology Data Exchange (ETDEWEB)

    Masuda, Ryo, E-mail: masudar@rri.kyoto-u.ac.jp; Kobayashi, Yasuhiro; Kitao, Shinji; Kurokuzu, Masayuki [Research Reactor Institute, Kyoto University, Kumatori-cho, Sennan-gun, Osaka 590-0494 (Japan); Saito, Makina [Beamline Spectroscopy/Scattering Group, Elettra-Sincrotrone Trieste, S. S. 14 Km 163.5, I-34149 Trieste (Italy); Yoda, Yoshitaka [Research and Utilization Division, Japan Synchrotron Radiation Research Institute, Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5198 (Japan); Mitsui, Takaya [Condensed Matter Science Division, Japan Atomic Energy Agency, Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5148 (Japan); Iga, Fumitoshi [College of Science, Ibaraki University, Mito, Ibaraki, 310-8512 (Japan); Seto, Makoto [Research Reactor Institute, Kyoto University, Kumatori-cho, Sennan-gun, Osaka 590-0494 (Japan); Condensed Matter Science Division, Japan Atomic Energy Agency, Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5148 (Japan)

    2014-02-24

    A detection system for synchrotron-radiation (SR)-based Mössbauer spectroscopy was developed to enhance the nuclear resonant scattering counting rate and thus increase the available nuclides. In the system, a windowless avalanche photodiode (APD) detector was combined with a vacuum cryostat to detect the internal conversion (IC) electrons and fluorescent X-rays accompanied by nuclear de-excitation. As a feasibility study, the SR-based Mössbauer spectrum using the 76.5 keV level of {sup 174}Yb was observed without {sup 174}Yb enrichment of the samples. The counting rate was five times higher than that of our previous system, and the spectrum was obtained within 10 h. This result shows that nuclear resonance events can be more efficiently detected by counting IC electrons for nuclides with high IC coefficients. Furthermore, the windowless detection system enables us to place the sample closer to the APD elements and is advantageous for nuclear resonant inelastic scattering measurements. Therefore, this detection system can not only increase the number of nuclides accessible in SR-based Mössbauer spectroscopy but also allows the nuclear resonant inelastic scattering measurements of small single crystals or enzymes with dilute probe nuclides that are difficult to measure with the previous detection system.

  8. Study of Abnormal Vertical Emittance Growth in ATF Extraction Line

    Energy Technology Data Exchange (ETDEWEB)

    Alabau, M.; Faus-Golfe, A.; /Valencia U., IFIC; Alabau, M.; Bambade, P.; Brossard, J.; Le Meur, G.; Rimbault, C.; Touze, F.; /Orsay, LAL; Angal-Kalinin, D.; Jones, J.K.; /Daresbury; Appleby, R.; Scarfe, A.; /Manchester U.; Kuroda, S.; /KEK, Tsukuba; White, G.R.; Woodley, M.; /SLAC; Zimmermann, F.; /CERN

    2011-11-04

    Since several years, the vertical beam emittance measured in the Extraction Line (EXT) of the Accelerator Test Facility (ATF) at KEK, that will transport the electron beam from the ATF Damping Ring (DR) to the future ATF2 Final Focus beam line, is significantly larger than the emittance measured in the DR itself, and there are indications that it grows rapidly with increasing beam intensity. This longstanding problem has motivated studies of possible sources of this anomalous emittance growth. One possible contribution is non-linear magnetic fields in the extraction region experimented by the beam while passing off-axis through magnets of the DR during the extraction process. In this paper, simulations of the emittance growth are presented and compared to observations. These simulations include the effects of predicted non-linear field errors in the shared DR magnets and orbit displacements from the reference orbit in the extraction region. Results of recent measurements using closed orbit bumps to probe the relation between the extraction trajectory and the anomalous emittance growth are also presented.

  9. Emittance of a Field Emission Electron Source

    Science.gov (United States)

    2010-01-05

    approximately correct. The gate and switching time A thermionic source is run space-charge limited for which the current varies as a power 3 /2 of the grid...and millimeter-wave power amplifiers that use thermionic cathodes, requiring the sources to produce a current density characteristic of that in the...Rb radius, magnetic field strength B, accelerating voltage Vb, frequency f inversely related to Rb, harmonic number n, and emit- tance via 1− J

  10. A novel method to quantify the emission and conversion of VOCs in the smoking of electronic cigarettes

    Science.gov (United States)

    Kim, Yong-Hyun; Kim, Ki-Hyun

    2015-11-01

    An analytical technique was developed for the quantitation of volatile organic compounds (VOC) in three different forms of electronic cigarette (EC): solution, vapor, and aerosol. Through the application of the mass change tracking (MCT) approach, the consumed amount of the solution was measured to track the conversion of targets between the different phases. The concentration of aerosol plus vapor (A&V) decreased exponentially (559 to 129 g m-3) with increasing puff velocity (0.05 to 1 L min-1). A strong correlation existed between sampling volume and consumed solution mass (R2 = 0.9972 ± 0.0021 (n = 4)). In the EC solution, acetic acid was considerably high (25.8 μg mL-1), along with trace quantities of some VOCs (methyl ethyl ketone, toluene, propionic acid, and i-butyric acid: 0.24 ± 0.15 μg mL-1 (n = 4)). In the aerosol samples, many VOCs (n-butyraldehyde, n-butyl acetate, benzene, xylene, styrene, n-valeric acid, and n-hexanoic acid) were newly produced (138 ± 250 μg m-3). In general, the solution-to-aerosol (S/A) conversion was significant: e.g., 1,540% for i-butyric acid. The emission rates of all targets computed based on their mass in aerosol/ consumed solution (ng mL-1) were from 30.1 (p-xylene) to 398 (methyl ethyl ketone), while those of carboxyls were much higher from 166 (acetic acid) to 5,850 (i-butyric acid).

  11. Nanoseconds field emitted current pulses from ZrC needles and field emitter arrays

    CERN Document Server

    Ganter, R; Betemps, R; Dehler, M; Gerber, T; Gobrecht, J; Gough, C; Johnson, M; Kirk, E; Knopp, G; Le Pimpec, F; Li, K; Paraliev, M; Pedrozzi, M; Rivkin, L; Schulz, L; Sehr, H; Wrulich, A F

    2006-01-01

    The properties of the electron source define the ultimate limit of the beam quality in linear accelerators like Free Electron Lasers (FEL). The goal is to develop an electron gun delivering beam emittance lower than current state of the art. Such a gun should reduce the cost and size of an X-ray Free Electron Laser (XFEL). In this paper we present two concepts of field emitter cathodes which could potentially produce low emittance beam. The first challenging parameter for such cathode is to emit peak current as high as 5 A. This is the minimum current requirement for the XFEL concept from Paul Scherrer Institut.1 Maximum current of 0.12 A and 0.58 A have been reached respectively with field emitter arrays (FEA) and single needle cathodes. Laser assisted field emission gave encouraging results to reach even higher peak current and to pre-bunch the beam.

  12. Widely tunable edge emitters

    Science.gov (United States)

    Sarlet, Gert; Wesstrom, Jan-Olof; Rigole, Pierre-Jean; Broberg, Bjoern

    2001-11-01

    We will present the current state-of-the-art in widely tunable edge emitting lasers for WDM applications. Typical applications for a tunable laser will be discussed, and the different types of tunable lasers available today will be compared with respect to the requirements posed by these applications. We will focus on the DBR-type tunable lasers - DBR, SG-DBR and GCSR - which at present seem to be the only tunable lasers mature enough for real-life applications. Their main advantages are that they are all monolithic, with no moving parts, and can be switched from one frequency to the other very rapidly since the tuning is based on carrier injection and not on thermal or mechanical changes. We will briefly discuss the working principle of each of these devices, and present typical performance characteristics. From a manufacturing point of view, rapid characterization of the lasers is crucial; therefore an overview will be given of different characterization schemes that have recently been proposed. For the end user, reliability is the prime issue. We will show results of degradation studies on these lasers and outline how the control electronics that drive the laser can compensate for any frequency drift. Finally, we will also discuss the impact of the requirement for rapid frequency switching on the design of the control electronics.

  13. Fe-contacts on InAs(100) and InP(100) characterised by conversion electron Mössbauer spectroscopy

    DEFF Research Database (Denmark)

    Damsgaard, Christian Danvad; Gunnlaugsson, H.P; Weyer, G.;

    2005-01-01

    We have grown 4 nm thin films of Fe-57 on InAs(100) and InP(100) surfaces by use of MBE and studied the samples by Fe-57 conversion electron Mossbauer spectroscopy. In the case of InAs, the Mossbauer spectrum showed a sextet due to alpha-Fe and a further magnetically split component with slightly...

  14. Transformation of polycrystalline tungsten to monocrystalline tungsten W(100) and its potential application in Schottky emitters

    NARCIS (Netherlands)

    Dokania, A.K.; Hendrikx, R.; Kruit, P.

    2009-01-01

    The electron sources in electron microscopes and electron lithography machines often consist of small diameter W(100) wires, etched to form a sharp tip. The electron emission is facilitated by the Schottky effect, thus the name Schottky emitter. The authors are investigating the feasibility of array

  15. Modified blackbody radiation spectrum of a selective emitter with application to incandescent light source design.

    Science.gov (United States)

    Matsumoto, Takahiro; Tomita, Makoto

    2010-06-21

    Using a selective emitter with high emissivity in the visible wavelength region and low emissivity in the infrared wavelength region, we reduced the infrared contribution to the blackbody radiation spectrum and shifted the peak emission to shorter wavelengths. We made precise measurements of thermal radiation loss. The conversion efficiency from input electric power to visible light radiation was quantitatively evaluated with high accuracy. Using the proposed selective emitter, the conversion efficiencies in excess of 95% could be produced. Our conclusions pave the way for the design of incandescent lamps with luminous efficiencies exceeding 400 lm/W.

  16. Emittance control and RF bunch compression in the NSRRC photoinjector

    Science.gov (United States)

    Lau, W. K.; Hung, S. B.; Lee, A. P.; Chou, C. S.; Huang, N. Y.

    2011-05-01

    The high-brightness photoinjector being constructed at the National Synchrotron Radiation Research Center is for testing new accelerator and light-source concepts. It is the so-called split photoinjector configuration in which a short solenoid magnet is used for emittance compensation. The UV-drive laser pulses are also shaped to produce uniform cylindrical bunches for further reduction of beam emittance. However, limited by the available power from our microwave power system, the nominal accelerating gradient in the S-band booster linac is set at 18 MV/m. A simulation study with PARMELA shows that the linac operating at this gradient fails to freeze the electron beam emittance at low value. A background solenoid magnetic field is applied for beam emittance control in the linac during acceleration. A satisfactory result that meets our preliminary goal has been achieved with the solenoid magnetic field strength at 0.1 T. RF bunch compression as a means to achieve the required beam brightness for high-gain free-electron laser experiments is also examined. The reduction of bunch length to a few hundred femtoseconds can be obtained.

  17. Ultrafast laser pulse heating of metallic photocathodes and its contribution to intrinsic emittance

    CERN Document Server

    Maxson, J; Cultrera, L; Karkare, S; Padmore, H

    2016-01-01

    The heating of the electronic distribution of a copper photocathode is calculated under the two-temperature model for ultrafast laser illumination with fluences typical for use in RF photoinjectors. Using the finite temperature-extended relations for the photocathode intrinsic emittance and quantum efficiency, the time-dependent emittance growth due to this laser heating is calculated. This laser heating is seen to limit the intrinsic emittance achievable for photoinjectors using short laser pulses and low quantum efficiency metal photocathodes. A pump-probe photocathode experiment in a standard 1.6 cell S-band gun is proposed, in which simulations show the time dependent thermal emittance modulation from the laser heating can persist for meters downstream and, in principle, be measured using a slice emittance diagnostic.

  18. Extremely low vertical-emittance beam in accelerator-test facility at KEK

    Energy Technology Data Exchange (ETDEWEB)

    Kubo, K.; Akemoto, M.; Anderson, S.; Aoki, T.; Araki, S.; Bane, K.L.F.; Blum, P.; Corlett, J.; Dobashi, K.; Emma, P.; Frisch, J.; Fukuda, M.; Guo, Z.; Hasegawa, K.; Hayano, H.; Higo, T.; Higurashi, A.; Honda, Y.; Iimura, T.; Imai, T.; Jobe, K.; Kamada, S.; Karataev, P.; Kashiwagi, S.; Kim, E.; Kobuki, T.; Kotseroglou, T.; Kurihara, Y.; Kuriki, M.; Kuroda, R.; Kuroda, S.; Lee, T.; Luo, X.; McCormick, D.J.; McKee, B.; Mimashi, T.; Minty, M.; Muto, T.; Naito, Takashi; Naumenko, G.; Nelson, J.; Nguyen, M.N.; Oide, K.; Okugi, T.; Omori, T.; Oshima, T.; Pei, G.; Potylitsyn, A.; Qin, Q.; Raubenheimer, T.; Ross, M.; Sakai, H.; Sakai, I.; Schmidt, F.; Slaton, T.; Smith, H.; Smith, S.; Suzuki, Toshikazu; Takano, M.; Takeda, Seishi; Terunuma, N.; Toge, N.; Turner, J.; Urakawa, J.; Vogel, V.; Woodley, M.; Yocky, J.; Young, A.; Zimmerman, F.; ATF Collaboration

    2002-05-13

    Electron beams with the lowest, normalized transverse emittance recorded so far were produced and confirmed in single-bunch-mode operation of the Accelerator Test Facility at KEK. We established a tuning method of the damping rings which achieves a small vertical dispersion and small x-y orbit coupling. The vertical emittance was less than 1 percent of the horizontal emittance. At the zero-intensity limit, the vertical normalized emittance was less than 2.8 x 10{sup -8} rad m at beam energy 1.3 GeV. At high intensity, strong effects of intrabeam scattering were observed, which had been expected in view of the extremely high particle density due to the small transverse emittance.

  19. Thermal conversion of electronic and electrical properties of AuCl3-doped single-walled carbon nanotubes.

    Science.gov (United States)

    Yoon, Seon-Mi; Kim, Un Jeong; Benayad, Anass; Lee, Il Ha; Son, Hyungbin; Shin, Hyeon-Jin; Choi, Won Mook; Lee, Young Hee; Jin, Yong Wan; Lee, Eun-Hong; Lee, Sang Yoon; Choi, Jae-Young; Kim, Jong Min

    2011-02-22

    By using carbon-free inorganic atomic layer involving heat treatment from 150 to 300 °C, environmentally stable and permanent modulation of the electronic and electrical properties of single-walled carbon nanotubes (SWCNTs) from p-type to ambi-polar and possibly to n-type has been demonstrated. At low heat treatment temperature, a strong p-doping effect from Au(3+) ions to CNTs due to a large difference in reduction potential between them is dominant. However at higher temperature, the gold species are thermally reduced, and thermally induced CNT-Cl finally occurs by the decomposition reaction of AuCl(3). Thus, in the AuCl(3)-doped SWCNTs treated at higher temperature, the p-type doping effect is suppressed and an n-type property from CNT-Cl is thermally induced. Thermal conversion of the majority carrier type of AuCl(3)-doped SWNTs is systematically investigated by combining various optical and electrical tools.

  20. Sources of Emittance in RF Photocathode Injectors

    Energy Technology Data Exchange (ETDEWEB)

    Dowell, David [SLAC National Accelerator Lab., Menlo Park, CA (United States)

    2016-12-11

    Advances in electron beam technology have been central to creating the current generation of x-ray free electron lasers and ultra-fast electron microscopes. These once exotic devices have become essential tools for basic research and applied science. One important beam technology for both is the electron source which, for many of these instruments, is the photocathode RF gun. The invention of the photocathode gun and the concepts of emittance compensation and beam matching in the presence of space charge and RF forces have made these high-quality beams possible. Achieving even brighter beams requires a taking a finer resolution view of the electron dynamics near the cathode during photoemission and the initial acceleration of the beam. In addition, the high brightness beam is more sensitive to degradation by the optical aberrations of the gun’s RF and magnetic lenses. This paper discusses these topics including the beam properties due to fundamental photoemission physics, space charge effects close to the cathode, and optical distortions introduced by the RF and solenoid fields. Analytic relations for these phenomena are derived and compared with numerical simulations.

  1. Measurement of ultra low transverse emittance at REGAE

    Energy Technology Data Exchange (ETDEWEB)

    Hachmann, M., E-mail: max.hachmann@desy.de; Flöttmann, K.

    2016-09-01

    The linear accelerator REGAE at DESY produces short and low charged electron bunches, on the one hand to resolve the excitation transitions of atoms temporally by pump-probe electron diffraction experiments and on the other hand to investigate principal mechanisms of laser plasma acceleration. For both cases a high quality electron beam is required which can be identified with a small beam emittance. A standard magnet scan is used for the emittance measurement which is in case of a low charged bunch most sensitive to the beam size determination (RMS or 2nd central moment of a distribution). Therefore the diagnostic and a routine to calculate proper central moments of an arbitrary distribution will be introduced and discussed.

  2. Beam emittance measurements at Fermilab

    Energy Technology Data Exchange (ETDEWEB)

    Wendt, Manfred; Eddy, Nathan; Hu, Martin; Scarpine, Victor; Syphers, Mike; Tassotto, Gianni; Thurman-Keup, Randy; Yang, Ming-Jen; Zagel, James; /Fermilab

    2008-01-01

    We give short overview of various beam emittance measurement methods, currently applied at different machine locations for the Run II collider physics program at Fermilab. All these methods are based on beam profile measurements, and we give some examples of the related instrumentation techniques. At the end we introduce a multi-megawatt proton source project, currently under investigation at Fermilab, with respect to the beam instrumentation challenges.

  3. High power telecommunication-compatible photoconductive terahertz emitters based on plasmonic nano-antenna arrays

    Science.gov (United States)

    Yardimci, Nezih Tolga; Lu, Hong; Jarrahi, Mona

    2016-11-01

    We present a high-power and broadband photoconductive terahertz emitter operating at telecommunication optical wavelengths, at which compact and high-performance fiber lasers are commercially available. The presented terahertz emitter utilizes an ErAs:InGaAs substrate to achieve high resistivity and short carrier lifetime characteristics required for robust operation at telecommunication optical wavelengths. It also uses a two-dimensional array of plasmonic nano-antennas to offer significantly higher optical-to-terahertz conversion efficiencies compared to the conventional photoconductive emitters, while maintaining broad operation bandwidths. We experimentally demonstrate pulsed terahertz radiation over 0.1-5 THz frequency range with the power levels as high as 300 μW. This is the highest-reported terahertz radiation power from a photoconductive emitter operating at telecommunication optical wavelengths.

  4. High power telecommunication-compatible photoconductive terahertz emitters based on plasmonic nano-antenna arrays.

    Science.gov (United States)

    Yardimci, Nezih Tolga; Lu, Hong; Jarrahi, Mona

    2016-11-07

    We present a high-power and broadband photoconductive terahertz emitter operating at telecommunication optical wavelengths, at which compact and high-performance fiber lasers are commercially available. The presented terahertz emitter utilizes an ErAs:InGaAs substrate to achieve high resistivity and short carrier lifetime characteristics required for robust operation at telecommunication optical wavelengths. It also uses a two-dimensional array of plasmonic nano-antennas to offer significantly higher optical-to-terahertz conversion efficiencies compared to the conventional photoconductive emitters, while maintaining broad operation bandwidths. We experimentally demonstrate pulsed terahertz radiation over 0.1-5 THz frequency range with the power levels as high as 300 μW. This is the highest-reported terahertz radiation power from a photoconductive emitter operating at telecommunication optical wavelengths.

  5. Theoretical studies on performance evaluation of solar thermoelectronic energy converter with graphene emitter

    Science.gov (United States)

    Olawole, Olukunle; de, Dilip

    In this paper we consider detailed energy dynamics of solar thermoelectronic energy converter using graphene as the emitter. The emitter is heated by solar energy concentrated by a parabolic mirror concentrator. We study the performance evaluation of the energy conversion using temperature dependent work function of graphene and model the space charge problem by introducing a factor in the emitter and collector current densities. We present computations on power output and efficiency as function of solar insolation, height of emitter from the base of the mirror, reflection coefficient of the mirror, temperature and work function of collector. Effect of molecular doping on the performance of the graphene solar tech is also discussed. Please schedule our papers so that they are well separated in time for presentations.

  6. Alpha particle emitters in medicine

    Energy Technology Data Exchange (ETDEWEB)

    Fisher, D.R.

    1989-09-01

    Radiation-induced cancer of bone, liver and lung has been a prominent harmful side-effect of medical applications of alpha emitters. In recent years, however, the potential use of antibodies labeled with alpha emitting radionuclides against cancer has seemed promising because alpha particles are highly effective in cell killing. High dose rates at high LET, effectiveness under hypoxic conditions, and minimal expectancy of repair are additional advantages of alpha emitters over antibodies labeled with beta emitting radionuclides for cancer therapy. Cyclotron-produced astatine-211 ({sup 211}At) and natural bismuth-212 ({sup 212}Bi) have been proposed and are under extensive study in the United States and Europe. Radium-223 ({sup 223}Ra) also has favorable properties as a potential alpha emitting label, including a short-lived daughter chain with four alpha emissions. The radiation dosimetry of internal alpha emitters is complex due to nonuniformly distributed sources, short particle tracks, and high relative specific ionization. The variations in dose at the cellular level may be extreme. Alpha-particle radiation dosimetry, therefore, must involve analysis of statistical energy deposition probabilities for cellular level targets. It must also account fully for nonuniform distributions of sources in tissues, source-target geometries, and particle-track physics. 18 refs., 4 figs.

  7. Investigations on the transverse phase space at a photo injector for minimized emittance

    Energy Technology Data Exchange (ETDEWEB)

    Miltchev, V.

    2006-08-15

    Radio frequency photoinjectors are electron sources able to generate beams of extremely high brightness, which are applicable to linac driven Free Electron Lasers (FEL). Because of the high phase space density, the dynamics of the electron beam is dominated by space charge interactions between the particles. This thesis studies the transverse phase space of space charge dominated electron beams produced by the Photo Injector Test Facility in Zeuthen (PITZ). The operation conditions for minimizing the transverse emittance are studied experimentally, theoretically and in simulations. The influence of the longitudinal profile of the driving UV laser pulse on the transverse emittance is investigated. Emphasis is placed on the experimental study of the emittance as a function of different machine parameters like the laser beam spot size, the amplitude of the focusing magnetic field, the rf phase and the electron bunch charge. First investigations on the thermal emittance for Cs{sub 2}Te photocathodes under rf operating conditions are presented. Measurements of the thermal emittance scaling with the photocathode laser spot size are analyzed. The significance of the applied rf field in the emittance formation process is discussed. (orig.)

  8. Compact Rare Earth Emitter Hollow Cathode

    Science.gov (United States)

    Watkins, Ronald; Goebel, Dan; Hofer, Richard

    2010-01-01

    A compact, high-current, hollow cathode utilizing a lanthanum hexaboride (LaB6) thermionic electron emitter has been developed for use with high-power Hall thrusters and ion thrusters. LaB6 cathodes are being investigated due to their long life, high current capabilities, and less stringent xenon purity and handling requirements compared to conventional barium oxide (BaO) dispenser cathodes. The new cathode features a much smaller diameter than previously developed versions that permit it to be mounted on axis of a Hall thruster ( internally mounted ), as opposed to the conventional side-mount position external to the outer magnetic circuit ("externally mounted"). The cathode has also been reconfigured to be capable of surviving vibrational loads during launch and is designed to solve the significant heater and materials compatibility problems associated with the use of this emitter material. This has been accomplished in a compact design with the capability of high-emission current (10 to 60 A). The compact, high-current design has a keeper diameter that allows the cathode to be mounted on the centerline of a 6- kW Hall thruster, inside the iron core of the inner electromagnetic coil. Although designed for electric propulsion thrusters in spacecraft station- keeping, orbit transfer, and interplanetary applications, the LaB6 cathodes are applicable to the plasma processing industry in applications such as optical coatings and semiconductor processing where reactive gases are used. Where current electrical propulsion thrusters with BaO emitters have limited life and need extremely clean propellant feed systems at a significant cost, these LaB6 cathodes can run on the crudest-grade xenon propellant available without impact. Moreover, in a laboratory environment, LaB6 cathodes reduce testing costs because they do not require extended conditioning periods under hard vacuum. Alternative rare earth emitters, such as cerium hexaboride (CeB6) can be used in this

  9. Initial implementation of the conversion from the energy-subtracted CT number to electron density in tissue inhomogeneity corrections: An anthropomorphic phantom study of radiotherapy treatment planning

    Energy Technology Data Exchange (ETDEWEB)

    Tsukihara, Masayoshi [Division of Radiological Technology, Graduate School of Health Sciences, Niigata University, Niigata 951-8518 (Japan); Noto, Yoshiyuki [Department of Radiology, Niigata University Medical and Dental Hospital, Niigata 951-8520 (Japan); Sasamoto, Ryuta; Hayakawa, Takahide; Saito, Masatoshi, E-mail: masaito@clg.niigata-u.ac.jp [Department of Radiological Technology, School of Health Sciences, Faculty of Medicine, Niigata University, Niigata 951-8518 (Japan)

    2015-03-15

    Purpose: To achieve accurate tissue inhomogeneity corrections in radiotherapy treatment planning, the authors had previously proposed a novel conversion of the energy-subtracted computed tomography (CT) number to an electron density (ΔHU–ρ{sub e} conversion), which provides a single linear relationship between ΔHU and ρ{sub e} over a wide range of ρ{sub e}. The purpose of this study is to present an initial implementation of the ΔHU–ρ{sub e} conversion method for a treatment planning system (TPS). In this paper, two example radiotherapy plans are used to evaluate the reliability of dose calculations in the ΔHU–ρ{sub e} conversion method. Methods: CT images were acquired using a clinical dual-source CT (DSCT) scanner operated in the dual-energy mode with two tube potential pairs and an additional tin (Sn) filter for the high-kV tube (80–140 kV/Sn and 100–140 kV/Sn). Single-energy CT using the same DSCT scanner was also performed at 120 kV to compare the ΔHU–ρ{sub e} conversion method with a conventional conversion from a CT number to ρ{sub e} (Hounsfield units, HU–ρ{sub e} conversion). Lookup tables for ρ{sub e} calibration were obtained from the CT image acquisitions for tissue substitutes in an electron density phantom (EDP). To investigate the beam-hardening effect on dosimetric uncertainties, two EDPs with different sizes (a body EDP and a head EDP) were used for the ρ{sub e} calibration. Each acquired lookup table was applied to two radiotherapy plans designed using the XiO TPS with the superposition algorithm for an anthropomorphic phantom. The first radiotherapy plan was for an oral cavity tumor and the second was for a lung tumor. Results: In both treatment plans, the performance of the ΔHU–ρ{sub e} conversion was superior to that of the conventional HU–ρ{sub e} conversion in terms of the reliability of dose calculations. Especially, for the oral tumor plan, which dealt with dentition and bony structures, treatment

  10. Emitter/absorber interface of CdTe solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Song, Tao, E-mail: tsong241@gmail.com; Sites, James R. [Physics Department, Colorado State University, Fort Collins, Colorado 80523 (United States); Kanevce, Ana [National Renewable Energy Laboratory, Golden, Colorado 80401 (United States)

    2016-06-21

    The performance of CdTe solar cells can be very sensitive to the emitter/absorber interface, especially for high-efficiency cells with high bulk lifetime. Performance losses from acceptor-type interface defects can be significant when interface defect states are located near mid-gap energies. Numerical simulations show that the emitter/absorber band alignment, the emitter doping and thickness, and the defect properties of the interface (i.e., defect density, defect type, and defect energy) can all play significant roles in the interface recombination. In particular, a type I heterojunction with small conduction-band offset (0.1 eV ≤ ΔE{sub C} ≤ 0.3 eV) can help maintain good cell efficiency in spite of high interface defect density, much like with Cu(In,Ga)Se{sub 2} (CIGS) cells. The basic principle is that positive ΔE{sub C}, often referred to as a “spike,” creates an absorber inversion and hence a large hole barrier adjacent to the interface. As a result, the electron-hole recombination is suppressed due to an insufficient hole supply at the interface. A large spike (ΔE{sub C} ≥ 0.4 eV), however, can impede electron transport and lead to a reduction of photocurrent and fill-factor. In contrast to the spike, a “cliff” (ΔE{sub C} < 0 eV) allows high hole concentration in the vicinity of the interface, which will assist interface recombination and result in a reduced open-circuit voltage. Another way to mitigate performance losses due to interface defects is to use a thin and highly doped emitter, which can invert the absorber and form a large hole barrier at the interface. CdS is the most common emitter material used in CdTe solar cells, but the CdS/CdTe interface is in the cliff category and is not favorable from the band-offset perspective. The ΔE{sub C} of other n-type emitter choices, such as (Mg,Zn)O, Cd(S,O), or (Cd,Mg)Te, can be tuned by varying the elemental ratio for an optimal positive value of ΔE{sub C}. These

  11. Emitter/absorber interface of CdTe solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Song, Tao [Physics Department, Colorado State University, Fort Collins, Colorado 80523, USA; Kanevce, Ana [National Renewable Energy Laboratory, Golden, Colorado 80401, USA; Sites, James R. [Physics Department, Colorado State University, Fort Collins, Colorado 80523, USA

    2016-06-17

    The performance of CdTe solar cells can be very sensitive to their emitter/absorber interfaces, especially for high-efficiency cells with improved bulk properties. When interface defect states are located at efficient recombination energies, performance losses from acceptor-type interface defects can be significant. Numerical simulations show that the emitter/absorber band alignment, the emitter doping and thickness, and the defect properties of the interface (i.e. defect density, defect type, and defect energy) can all play significant roles in the interface recombination. In particular, a type I heterojunction with small conduction-band offset (0.1 eV electron-hole recombination is suppressed due to an insufficient hole supply at the interface. A large spike (..delta..EC >/= 0.4 eV), however, can impede electron transport and lead to a reduction of photocurrent and fill-factor. In contrast to the spike, a 'cliff' (.delta..EC < 0 eV) is likely to allow many holes in the vicinity of the interface, which will assist interface recombination and result in a reduced open-circuit voltage. In addition, a thin and highly-doped emitter can invert the absorber, form a large hole barrier, and decrease device performance losses due to high interface defect density. CdS is the most common emitter material used in CdTe solar cells, but the CdS/CdTe interface is in the cliff category and is not favorable from the band-offset perspective. Other n-type emitter choices, such as (Mg,Zn)O, Cd(S,O), or (Cd,Mg)Te, can be tuned by varying the elemental ratio for an optimal positive value of ..delta..EC. These materials are predicted

  12. Development of High Intensity Beam Emittance Measurement Unit

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Three sets of High Intensity Beam Emittance Measurement Units (HIBEMUs) are being developed at Peking University. They are HIBEMU-2 (slit-wire type, one direction), HIBEMU-3 (Allison scanner type, one direction) and HIBEMU-4 (slit-wire type, two directions). For HIBEMU-2 and HIBEMU-3, more recent work has been done on software redesign in order to measure beam emittance and to draw phase diagram more efficiently and precisely. Software for control and data processing of them were developed in Labveiw environment, trying to improve calculation rationality and to offer user-friendly interface. Mechanical modification was also done for HIBEMU-3, mainly concentrating on the protection of Faraday cups from being overheated by the high intensity beam and also from interference of secondary electrons. This paper will also cover the mechanical structure as well as the software development of HIBEMU-4, which is a two-direction emittance scanner newly designed and manufactured for the high energy beam transport (HEBT) of Peking University Neutron Imaging FaciliTY (PKUNIFTY). At the end of this paper, comparison and analysis of the three HIBEMUs are given to draw forth better design of the future emittance measurement facility.

  13. Molecular hosts for triplet emitters in organic light-emitting diodes and the corresponding working principle

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    This paper summarizes the mechanism and routes for excitation of triplet emitters in dopant emission based phosphorescent organic light-emitting diodes (PhOLEDs),providing a comprehensive overview of recent progress in molecular hosts for triplet emitters in PhOLEDs.Particularly,based on the nature of different hosts,e.g.,hole transporting,electron transporting or bipolar materials,in which the dopant emitters can be hosted to generate phosphorescence,the respective device performances are summarized and compared.Highlights are given to the relationships among the molecular structure,thermal stability,triplet energy,carrier mobility,molecular orbital energy level and their corresponding device performances.

  14. Emittance Measurements of the SSRL Gun Test Facility

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez, Michael; Clendenin, James; Fisher, Alan; Miller, Roger; Palmer, Dennis; Park, Sam; Schmerge, John; Weaver, Jim; Wiedemann, Helmut; Winick, Herman; Yeremian, Dian; /SLAC; Meyerhofer, David; Reis, David; /Rochester U.

    2011-09-01

    A photocathode RF gun test stand is under construction in the injector vault of the Stanford Synchrotron Radiation Laboratory at SLAC. The goal of this facility is to produce an electron beam with a normalized emittance of 1-3[mm-mr], a longitudinal bunch duration of the order of 10[ps] FWHM and approximately 1[nC] of charge per bunch. The beam will be generated from a laser driven copper photocathode RF gun developed in collaboration with BNL, LBL and UCLA. The 3-5[MeV] beam from the gun will be accelerated using a SLAC three meter S-band accelerator section. The emittance of the electron beam will be measured through the use of quadrupole scans with phosphor screens and also a wire scanner. The details of the experimental setup will be discussed, and first measurements will be presented and compared with results from PARMELA simulations.

  15. Normal spectral emittance of Inconel 718 aeronautical alloy coated with yttria stabilized zirconia films

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez-Fernandez, L. [Departamento de Fisica de la Materia Condensada, Facultad de Ciencia y Tecnologia, Universidad del Pais Vasco, Barrio Sarriena s/n, 48940 Leioa, Bizkaia (Spain); Industria de Turbo Propulsores, S.A., Planta de Zamudio, Edificio 300, 48170 Zamudio, Bizkaia (Spain); Campo, L. del [Departamento de Fisica de la Materia Condensada, Facultad de Ciencia y Tecnologia, Universidad del Pais Vasco, Barrio Sarriena s/n, 48940 Leioa, Bizkaia (Spain); Perez-Saez, R.B., E-mail: raul.perez@ehu.es [Departamento de Fisica de la Materia Condensada, Facultad de Ciencia y Tecnologia, Universidad del Pais Vasco, Barrio Sarriena s/n, 48940 Leioa, Bizkaia (Spain); Tello, M.J. [Departamento de Fisica de la Materia Condensada, Facultad de Ciencia y Tecnologia, Universidad del Pais Vasco, Barrio Sarriena s/n, 48940 Leioa, Bizkaia (Spain)

    2012-02-05

    Highlights: Black-Right-Pointing-Pointer Emittance of Inconel 718 coated with plasma sprayed yttria stabilized zirconia. Black-Right-Pointing-Pointer The coating is opaque for {lambda} > 9 {mu}m and semi-transparent for {lambda} < 9 {mu}m. Black-Right-Pointing-Pointer In the semi-transparent region the emittance decreases with coating thickness. Black-Right-Pointing-Pointer 300 {mu}m thick coatings are still semi-transparent. Black-Right-Pointing-Pointer In the opaque region the surface roughness determines the emittance level. - Abstract: Knowledge of the radiative behaviour of the yttria stabilized zirconia (YSZ) thermal barrier coatings (TBCs) is needed to perform radiative heat transfer calculations in industrial applications. In this paper, normal spectral emittance experimental data of atmospheric plasma sprayed (PS) YSZ films layered on Inconel 718 substrates are shown. The spectral emittance was measured between 2.5 and 22 {mu}m on samples with film thicknesses ranging from 20 to 280 {mu}m. The samples were heated in a controlled environment, and the emittance was measured for several temperatures between 330 and 730 Degree-Sign C. The dependence of the spectral emittance with film thickness, surface roughness and temperature has been studied and compared with the available results for YSZ TBCs obtained by electron-beam physical vapour deposition. The PS-TBC samples show a Christiansen point at {lambda} = 12.8 {mu}m. The films are semi-transparent for {lambda} < 9 {mu}m, and opaque for {lambda} > 9 {mu}m. In the semi-transparent region, the contribution of the radiation emitted by the Inconel 718 substrate to the global emittance of the samples is analysed. In addition, the influence of the roughness in the emittance values in the opaque spectral region is discussed. Finally, the total normal emittance is obtained as a function of the TBC thickness.

  16. A numerical simulation study of gallium-phosphide/silicon heterojunction passivated emitter and rear solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, Hannes [Department of Solar Energy, Institute Solid-State Physics, Leibniz University of Hannover, Appelstr. 2, 30167 Hannover (Germany); ARC Photovoltaics Centre of Excellence, University of New South Wales (UNSW), Sydney, NSW 2052 (Australia); Ohrdes, Tobias [Institute for Solar Energy Research Hamelin (ISFH), 31860 Emmerthal (Germany); Dastgheib-Shirazi, Amir [Div. Photovoltaics, Department of Physics, University of Konstanz, 78457 Konstanz (Germany); Puthen-Veettil, Binesh; König, Dirk [ARC Photovoltaics Centre of Excellence, University of New South Wales (UNSW), Sydney, NSW 2052 (Australia); Altermatt, Pietro P. [Department of Solar Energy, Institute Solid-State Physics, Leibniz University of Hannover, Appelstr. 2, 30167 Hannover (Germany)

    2014-01-28

    The performance of passivated emitter and rear (PERC) solar cells made of p-type Si wafers is often limited by recombination in the phosphorus-doped emitter. To overcome this limitation, a realistic PERC solar cell is simulated, whereby the conventional phosphorus-doped emitter is replaced by a thin, crystalline gallium phosphide (GaP) layer. The resulting GaP/Si PERC cell is compared to Si PERC cells, which have (i) a standard POCl{sub 3} diffused emitter, (ii) a solid-state diffused emitter, or (iii) a high efficiency ion-implanted emitter. The maximum efficiencies for these realistic PERC cells are between 20.5% and 21.2% for the phosphorus-doped emitters (i)–(iii), and up to 21.6% for the GaP emitter. The major advantage of this GaP hetero-emitter is a significantly reduced recombination loss, resulting in a higher V{sub oc}. This is so because the high valence band offset between GaP and Si acts as a nearly ideal minority carrier blocker. This effect is comparable to amorphous Si. However, the GaP layer can be contacted with metal fingers like crystalline Si, so no conductive oxide is necessary. Compared to the conventional PERC structure, the GaP/Si PERC cell requires a lower Si base doping density, which reduces the impact of the boron-oxygen complexes. Despite the lower base doping, fewer rear local contacts are necessary. This is so because the GaP emitter shows reduced recombination, leading to a higher minority electron density in the base and, in turn, to a higher base conductivity.

  17. A numerical simulation study of gallium-phosphide/silicon heterojunction passivated emitter and rear solar cells

    Science.gov (United States)

    Wagner, Hannes; Ohrdes, Tobias; Dastgheib-Shirazi, Amir; Puthen-Veettil, Binesh; König, Dirk; Altermatt, Pietro P.

    2014-01-01

    The performance of passivated emitter and rear (PERC) solar cells made of p-type Si wafers is often limited by recombination in the phosphorus-doped emitter. To overcome this limitation, a realistic PERC solar cell is simulated, whereby the conventional phosphorus-doped emitter is replaced by a thin, crystalline gallium phosphide (GaP) layer. The resulting GaP/Si PERC cell is compared to Si PERC cells, which have (i) a standard POCl3 diffused emitter, (ii) a solid-state diffused emitter, or (iii) a high efficiency ion-implanted emitter. The maximum efficiencies for these realistic PERC cells are between 20.5% and 21.2% for the phosphorus-doped emitters (i)-(iii), and up to 21.6% for the GaP emitter. The major advantage of this GaP hetero-emitter is a significantly reduced recombination loss, resulting in a higher Voc. This is so because the high valence band offset between GaP and Si acts as a nearly ideal minority carrier blocker. This effect is comparable to amorphous Si. However, the GaP layer can be contacted with metal fingers like crystalline Si, so no conductive oxide is necessary. Compared to the conventional PERC structure, the GaP/Si PERC cell requires a lower Si base doping density, which reduces the impact of the boron-oxygen complexes. Despite the lower base doping, fewer rear local contacts are necessary. This is so because the GaP emitter shows reduced recombination, leading to a higher minority electron density in the base and, in turn, to a higher base conductivity.

  18. Source brightness and useful beam current of carbon nanotubes and other very small emitters

    NARCIS (Netherlands)

    Kruit, P.; Bezuijen, M.; Barth, J.E.

    2006-01-01

    The potential application of carbon nanotubes as electron sources in electron microscopes is analyzed. The resolution and probe current that can be obtained from a carbon nanotube emitter in a low-voltage scanning electron microscope are calculated and compared to the state of the art using Schottky

  19. Identification of a millisecond isomeric state in {sup 129}Cd{sub 81} via the detection of internal conversion and Compton electrons

    Energy Technology Data Exchange (ETDEWEB)

    Taprogge, J. [Instituto de Estructura de la Materia, CSIC, E-28006 Madrid (Spain); Departamento de Física Teórica, Universidad Autónoma de Madrid, E-28049 Madrid (Spain); RIKEN Nishina Center, RIKEN, 2-1 Hirosawa, Wako-shi, Saitama 351-0198 (Japan); Jungclaus, A., E-mail: andrea.jungclaus@csic.es [Instituto de Estructura de la Materia, CSIC, E-28006 Madrid (Spain); Grawe, H. [GSI Helmholtzzentrum für Schwerionenforschung GmbH, 64291 Darmstadt (Germany); Nishimura, S.; Xu, Z.Y.; Doornenbal, P.; Lorusso, G. [RIKEN Nishina Center, RIKEN, 2-1 Hirosawa, Wako-shi, Saitama 351-0198 (Japan); Nácher, E. [Instituto de Estructura de la Materia, CSIC, E-28006 Madrid (Spain); Simpson, G.S. [LPSC, Université Joseph Fourier Grenoble 1, CNRS/IN2P3, Institut National Polytechnique de Grenoble, F-38026 Grenoble cedex (France); Söderström, P.-A. [RIKEN Nishina Center, RIKEN, 2-1 Hirosawa, Wako-shi, Saitama 351-0198 (Japan); Sumikama, T. [Department of Physics, Tohoku University, Aoba, Sendai, Miyagi 980-8578 (Japan); Baba, H. [RIKEN Nishina Center, RIKEN, 2-1 Hirosawa, Wako-shi, Saitama 351-0198 (Japan); Browne, F. [School of Computing, Engineering and Mathematics, University of Brighton, Brighton BN2 4JG (United Kingdom); RIKEN Nishina Center, RIKEN, 2-1 Hirosawa, Wako-shi, Saitama 351-0198 (Japan); Fukuda, N. [RIKEN Nishina Center, RIKEN, 2-1 Hirosawa, Wako-shi, Saitama 351-0198 (Japan); Gernhäuser, R. [Physik Department E12, Technische Universität München, D-85748 Garching (Germany); and others

    2014-11-10

    The decay of an isomeric state in the neutron-rich nucleus {sup 129}Cd has been observed via the detection of internal conversion and Compton electrons providing first experimental information on excited states in this nucleus. The isomer was populated in the projectile fission of a {sup 238}U beam at the Radioactive Isotope Beam Factory at RIKEN. From the measured yields of γ-rays and internal conversion electrons, a multipolarity of E3 was tentatively assigned to the isomeric transition. A half-life of T{sub 1/2}=3.6(2) ms was determined for the new state which was assigned a spin of (21/2{sup +}), based on a comparison to shell model calculations performed using state-of-the-art realistic effective interactions.

  20. Hybrid emitter all back contact solar cell

    Science.gov (United States)

    Loscutoff, Paul; Rim, Seung

    2016-04-12

    An all back contact solar cell has a hybrid emitter design. The solar cell has a thin dielectric layer formed on a backside surface of a single crystalline silicon substrate. One emitter of the solar cell is made of doped polycrystalline silicon that is formed on the thin dielectric layer. The other emitter of the solar cell is formed in the single crystalline silicon substrate and is made of doped single crystalline silicon. The solar cell includes contact holes that allow metal contacts to connect to corresponding emitters.

  1. Minimum emittance in TBA and MBA lattices

    Science.gov (United States)

    Xu, Gang; Peng, Yue-Mei

    2015-03-01

    For reaching a small emittance in a modern light source, triple bend achromats (TBA), theoretical minimum emittance (TME) and even multiple bend achromats (MBA) have been considered. This paper derived the necessary condition for achieving minimum emittance in TBA and MBA theoretically, where the bending angle of inner dipoles has a factor of 31/3 bigger than that of the outer dipoles. Here, we also calculated the conditions attaining the minimum emittance of TBA related to phase advance in some special cases with a pure mathematics method. These results may give some directions on lattice design.

  2. Low Emittance Gun Project based on Field Emission

    CERN Document Server

    Ganter, Romain; Dehler, M; Gobrecht, Jens; Gough, Chris; Ingold, Gerhard; Leemann, Simon C; Shing-Bruce-Li, Kevin; Paraliev, Martin; Pedrozzi, Marco; Raguin, Jean Yves; Rivkin, Leonid; Schlott, Volker; Sehr, Harald; Streun, Andreas; Wrulich, Albin F; Zelenika, Sasa

    2004-01-01

    The design of an electron gun capable of producing beam emittance one order of magnitude lower than current technology would reduce considerably the cost and size of a free electron laser emitting at 0.1nm. Field emitter arrays (FEAs) including a gate and a focusing layer are an attractive technology for such high brightness sources. Electrons are extracted from micrometric tips thanks to voltage pulses between gate and tips. The focusing layer should then reduce the initial divergence of each emitted beamlets. This FEA will be inserted in a high gradient diode configuration coupled with a radiofrequency structure. In the diode part very high electric field pulses (several hundreds of MV/m) will limit the degradation of emittance due to space charge effect. This first acceleration will be obtained with high voltage pulses (typically a megavolt in a few hundred of nanoseconds) synchronized with the low voltage pulses applied to the FEA (typically one hundred of volts in one nanosecond at frequency below kilohe...

  3. The Next Generation Photoinjector (thermal Emittance, Quantum Efficiency)

    CERN Document Server

    Palmer, D T

    1998-01-01

    This dissertation will elucidate the design, construction, theory, and operation of the Next Generation Photoinjector (NGP). This photoinjector is comprised of the BNL/SLAC/UCLA 1.6 cell symmetrized S-band photocathode radio frequency (rf) electron gun and a single emittance-compensation solenoidal magnet. This photoinjector is a prototype for the Linear Coherent Light Source X-ray Free Electron Laser operating in the 1.5 A range. Simulations indicate that this photoinjector is capable of producing a 1 nC electron bunch with transverse normalized emittance less than 1 $\\pi$ mm-mrad were the cathode is illuminated with a 10 psec longitudinal flat top pulse. Using a Gaussian longitudinal laser profile with a full width half maximum (FWHM) of 10 psec, simulation indicates that the NGP is capable of producing a normalized rms emittance of 2.50 $\\pi$ mm-mrad at 1 nC. Using the removable cathode plate we have studied the quantum efficiency (QE) of both copper and magnesium photo-cathodes...

  4. Emittance measurements and minimization at the SwissFEL Injector Test Facility

    Directory of Open Access Journals (Sweden)

    Eduard Prat

    2014-10-01

    Full Text Available The emittance of the electron beam is crucial for Free-Electron Laser facilities: it has a strong influence on the lasing performance and on the total length of the accelerator. We present our procedure to measure and minimize the projected and slice emittance at the SwissFEL Injector Test Facility. The normalized slice emittance resolution achieved is about 3 nm and the longitudinal resolution is about 13 fs, with measurement errors estimated to be below 5%. After performing a full optimization we have obtained, for uncompressed beams, a slice emittance of about 200 nm for a beam charge of 200 pC, and a slice emittance of about 100 nm for 10 pC. These values are consistent with our simulations and are well below the requirements of the SwissFEL under construction at the Paul Scherrer Institute. At these bunch charges our measured slice emittances are, to our knowledge, the lowest reported so far for an electron linear accelerator.

  5. Ag Nanodots Emitters Embedded in a Nanocrystalline Thin Film Deposited on Crystalline Si Solar Cells.

    Science.gov (United States)

    Park, Seungil; Ryu, Sel Gi; Ji, HyungYong; Kim, Myeong Jun; Peck, Jong Hyeon; Kim, Keunjoo

    2016-06-01

    We fabricated crystalline Si solar cells with the inclusion of various Ag nanodots into the additional emitters of nanocrystallite Si thin films. The fabricated process was carried out on the emitter surface of p-n junction for the textured p-type wafer. The Ag thin films were deposited on emitter surfaces and annealed at various temperatures. The amorphous Si layers were also deposited on the Ag annealed surfaces by hot-wire chemical vapor deposition and then the deposited layers were doped by the second n-type doping process to form an additional emitter. From the characterization, both the Ag nanodots and the deposited amorphous Si thin films strongly reduce photo-reflectances in a spectral region between 200-400 nm. After embedding Ag nanodots in nanocrystallite Si thin films, a conversion efficiency of the sample with added emitter was achieved to 15.1%, which is higher than the 14.1% of the reference sample and the 14.7% of the de-posited sample with a-Si:H thin film after the Ag annealing process. The additional nanocrystallite emitter on crystalline Si with Ag nanodots enhances cell properties.

  6. Coupling single emitters to quantum plasmonic circuits

    DEFF Research Database (Denmark)

    Huck, Alexander; Andersen, Ulrik Lund

    2016-01-01

    In recent years, the controlled coupling of single-photon emitters to propagating surface plasmons has been intensely studied, which is fueled by the prospect of a giant photonic nonlinearity on a nanoscaled platform. In this article, we will review the recent progress on coupling single emitters...

  7. Direct 1{sup +}{yields}N{sup +} conversion of stable alkali ions using an electron cyclotron resonance ion source

    Energy Technology Data Exchange (ETDEWEB)

    Mery, A.; Jardin, P.; Saint-Laurent, M. G.; Bajeat, O.; Delahaye, P.; Dubois, M.; Fraanberg-Delahaye, H.; Lecomte, P.; Leherissier, P.; Maunoury, L.; Pichard, A.; Pacquet, J. Y.; Thomas, J. C. [GANIL, Bd Henri Becquerel, BP 55027, 14076 CAEN Cedex 5 (France); Alcantara-Nunez, J. [Departamento de Fisica de Particulas, Universidad Santiago de Compostela, 15782 Santiago de Compostela (Spain)

    2010-02-15

    The production of radioactive ions using the Isotope Separation On-Line method gives rise, in most cases, to singly charged ions. In order to perform experiments with postaccelerated radioactive ion beams, these ions have to be multicharged. We describe here a new compact design for a charge breeder that will be coupled to the production target of SPIRAL1 at GANIL. We present recent results obtained offline with stable alkali ions (Na, K, Rb, and Cs) on the SIRa test bench. Particularly, 1{sup +} to N{sup +} conversion efficiencies and conversion times are presented. Several points have been identified for the improvements of the present performances.

  8. Batch By Batch Longitudinal Emittance Blowup MD

    CERN Document Server

    Mastoridis, T; Butterworth, A; Jaussi, M; Molendijk, J

    2012-01-01

    The transverse bunch emittance increases significantly at 450 GeV from the time of injection till the ramp due to IBS. By selectively blowing up the longitudinal emittance of the incoming batch at each injection, it should be possible to reduce the transverse emittance growth rates due to IBS. An MD was conducted on April 22nd 2012 to test the feasibility and performance of the batch-by-batch longitudinal emittance blowup. There were three main goals during the MD. First, to test the developed hardware, firmware, and software for the batch-by-batch blowup. Then, to measure the transverse emittance growth rates of blown-up and "witness" batches to quantify any improvement, and finally to test the ALLInjectSequencer class, which deals with the complicated gymnastics of introducing or masking the new batch to various RF loops.

  9. Screen printed boron emitters for solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Recart, F.; Freire, I.; Perez, L.; Lago-Aurrekoetxea, R.; Jimeno, J.C.; Bueno, G. [Instituto de Tecnologia Microelectronica, Teknologia Mikroelektronikoaren Institutua UPV/EHU, Alda.Urquijo s/n, 48013 Bilbao (Spain)

    2007-06-15

    Screen printed (SP) boron emitters are presented as a useful option for the manufacturing of p-type emitters of solar cells. Details are provided on the diffusion process, including deposition, drying and firing steps, the latter performed in an infrared belt furnace. Besides their main dependences on the firing conditions, the sheet resistances and dopant profiles of the resulting emitters reveal the relevance of the drying step and the exhaustion limits of the doping source. A characterization of the recombination concludes that moderate emitter saturation currents (J{sub oe}<0.5 pA/cm{sup 2}) and acceptable bulk lifetimes ({tau}{sub B}>40 {mu}s) can be obtained on Czochralski silicon wafers. Finally, Cz n-type 0.7 {omega} cm solar cells are presented, which once again prove the feasibility of SP boron emitters and point to issues regarding their metallization. (author)

  10. Oxidation and emittance of superalloys in heat shield applications

    Science.gov (United States)

    Wiedemann, K. E.; Clark, R. K.; Unnam, J.

    1986-01-01

    Recently developed superalloys that form alumina coatings have a high potential for heat shield applications for advanced aerospace vehicles at temperatures above 1095C. Both INCOLOY alloy MA 956 (of the Inco Alloys International, Inc.), an iron-base oxide-dispersion-strengthened alloy, and CABOT alloy No. 214 (of the Cabot Corporation), an alumina-forming nickel-chromium alloy, have good oxidation resistance and good elevated temperature strength. The oxidation resistance of both alloys has been attributed to the formation of a thin alumina layer (alpha-Al2O3) at the surface. Emittance and oxidation data were obtained for simulated Space Shuttle reentry conditions using a hypersonic arc-heated wind tunnel. The surface oxides and substrate alloys were characterized using X-ray diffraction and scanning and transmission electron microscopy with an energy-dispersive X-ray analysis unit. The mass loss and emittance characteristics of the two alloys are discussed.

  11. Review of Emittance and Stability Monitoring Using Synchrotron Radiation Monitors

    CERN Document Server

    Holldack, K; Peatman, W B

    2001-01-01

    Different techniques of emittance and stability monitoring using bend magnet and undulator radiation will be reviewed. Besides imaging methods for emittance monitoring , the problem of XBPM's used for the measurement of the centre of mass position of the undulator beams will be treated in detail. The key feature of these monitors is a careful electron optical design to take account of gap dependent changes of the shape and photon energy of the undulator beam as well as spurious signals from dipoles and high heat load. The reason for the fact that these monitors work well on low energy machines like BESSY II but often fail due in high energy machines will be demonstrated by experimental results obtained on different types of BESSY II insertion devices such as undulators, wavelength shifters, multipole wigglers and electromagnetic undulators. Experimental results of global and local orbit monitoring and a proof of principle of a XBPM-based local feedback will be shown.

  12. Electrically pumped single-defect light emitters in WSe$_2$

    CERN Document Server

    Schwarz, S; Withers, F; Maguire, J K; Foster, A P; Dufferwiel, S; Hague, L; Makhonin, M N; Wilson, L R; Geim, A K; Novoselov, K S; Tartakovskii, A I

    2016-01-01

    Recent developments in fabrication of van der Waals heterostructures enable new type of devices assembled by stacking atomically thin layers of two-dimensional materials. Using this approach, we fabricate light-emitting devices based on a monolayer WSe$_2$, and also comprising boron nitride tunnelling barriers and graphene electrodes, and observe sharp luminescence spectra from individual defects in WSe$_2$ under both optical and electrical excitation. This paves the way towards the realization of electrically-pumped quantum emitters in atomically thin semiconductors. In addition we demonstrate tuning by more than 1 meV of the emission energy of the defect luminescence by applying a vertical electric field. This provides an estimate of the permanent electric dipole created by the corresponding electron-hole pair. The light-emitting devices investigated in our work can be assembled on a variety of substrates enabling a route to integration of electrically pumped single quantum emitters with existing technologi...

  13. Electron Bernstein wave heating and emission measurement through the very narrow O-X-B mode conversion window in the LHD

    Energy Technology Data Exchange (ETDEWEB)

    Igami, H.; Shimozuma, T.; Yoshimura, Y.; Takahashi, H.; Nishiura, M.; Seki, T.; Osakabe, M.; Mutoh, T. [National Institute for Fusion Science, Toki (Japan); Kubo, S. [National Institute for Fusion Science, Toki, Japan and Department of Energy Engineering and Science, Nagoya Univ., Nagoya (Japan); Ogasawara, S.; Makino, R. [Department of Energy Engineering and Science, Nagoya Univ., Nagoya (Japan); Idei, H. [Research Institute for Applied Mechanics, Kyusyu Univ., Kasuga (Japan); Nagasaki, K. [Institute of Advanced Energy, Kyoto Univ., Uji (Japan)

    2014-02-12

    In the large helical device (LHD), the theoretically predicted width of the ordinary-extraordinary-electron Bernstein wave (O-X-B) mode conversion (MC) window is comparable to the beam width and the power deposition is located in the off-axis region if the 77GHz fundamental electron cyclotron (EC) wave of is launched from an existing horizontal port antenna. In the experiment, the actual MC window location was looked for with changing the aiming. The effective aiming with that the increase of the stored energy was observed was two degrees apart from the location of the theoretical MC window at a maximum. Measurement of the waves originated from the thermally emitted EBW and radiated via the B-X-O mode conversion process is effective to improve the accuracy of the theoretical prediction with comparison between the theoretical and the experimental results. The theoretical prediction suggests that the width of the MC window of the fundamental 77GHz EC wave can be expanded if the lower port antenna is used. On the other hand, the MC window of the second harmonic 154GHz EC wave is blocked by horizontal port wall if another horizontal port antenna is used. It is required to move the final mirror of the quasi-optical antenna toward the plasma surface. Focusing of the beam at the plasma cutoff is (PC) also necessary for the effective mode conversion.

  14. Engineering and localization of quantum emitters in large hexagonal boron nitride layers

    CERN Document Server

    Choi, Sumin; ElBadawi, Christopher; Lobo, Charlene; Wang, Xuewen; Juodkazis, Saulius; Seniutinas, Gediminas; Toth, Milos; Aharonovich, Igor

    2016-01-01

    Hexagonal boron nitride (hBN) is a wide bandgap van der Waals material that has recently emerged as promising platform for quantum photonics experiments. In this work we study the formation and localization of narrowband quantum emitters in large flakes (up to tens of microns wide) of hBN. The emitters can be activated in as-grown hBN by electron irradiation or high temperature annealing, and the emitter formation probability can be increased by ion implantation or focused laser irradiation of the as-grown material. Interestingly, we show that the emitters are always localized at edges of the flakes, unlike most luminescent point defects in 3D materials. Our results constitute an important step on the road map of deploying hBN in nanophotonics applications.

  15. Transverse Beam Emittance Measurements of a 16 MeV Linac at the Idaho Accelerator Center

    Energy Technology Data Exchange (ETDEWEB)

    S. Setiniyaz, T.A. Forest, K. Chouffani, Y. Kim, A. Freyberger

    2012-07-01

    A beam emittance measurement of the 16 MeV S-band High Repetition Rate Linac (HRRL) was performed at Idaho State University's Idaho Accelerator Center (IAC). The HRRL linac structure was upgraded beyond the capabilities of a typical medical linac so it can achieve a repetition rate of 1 kHz. Measurements of the HRRL transverse beam emittance are underway that will be used to optimize the production of positrons using HRRL's intense electron beam on a tungsten converter. In this paper, we describe a beam imaging system using on an OTR screen and a digital CCD camera, a MATLAB tool to extract beamsize and emittance, detailed measurement procedures, and the measured transverse emittances for an arbitrary beam energy of 15 MeV.

  16. Demonstration of Cathode Emittance Dominated High Bunch Charge Beams in a DC gun-based Photoinjector

    CERN Document Server

    Gulliford, Colwyn; Bazarov, Ivan; Dunham, Bruce; Cultrera, Luca

    2015-01-01

    We present the results of transverse emittance and longitudinal current profile measurements of high bunch charge (greater than or equal to 100 pC) beams produced in the DC gun-based Cornell Energy Recovery Linac Photoinjector. In particular, we show that the cathode thermal and core beam emittances dominate the final 95% and core emittance measured at 9-9.5 MeV. Additionally, we demonstrate excellent agreement between optimized 3D space charge simulations and measurement, and show that the quality of the transverse laser distribution limits the optimal simulated and measured emittances. These results, previously thought achievable only with RF guns, demonstrate that DC gun based photoinjectors are capable of delivering beams with sufficient single bunch charge and beam quality suitable for many current and next generation accelerator projects such as Energy Recovery Linacs (ERLs) and Free Electron Lasers (FELs).

  17. Measurement of a small vertical emittance with a laser wire beam profile monitor

    Directory of Open Access Journals (Sweden)

    Hiroshi Sakai

    2002-12-01

    Full Text Available We describe in this paper a measurement of vertical emittance in the Accelerator Test Facility (ATF damping ring at KEK with a laser wire beam profile monitor. This monitor is based on the Compton scattering process of electrons with a laser light target which is produced by injecting a cw laser beam into a Fabry-Perot optical cavity. We installed the monitor at a straight section of the damping ring and measured the vertical emittance with three different ring conditions. In all cases, the ATF ring was operated at 1.28 GeV in a single bunch mode. When the ring was tuned for ultralow emittance, the vertical emittance of ε_{y}=(1.18±0.08×10^{-11}   mrad was achieved. This shows that the ATF damping ring has realized its target value also vertically.

  18. Microlensless interdigitated photoconductive terahertz emitters.

    Science.gov (United States)

    Singh, Abhishek; Prabhu, S S

    2015-01-26

    We report here fabrication of interdigitated photoconductive antenna (iPCA) terahertz (THz) emitters based on plasmonic electrode design. Novel design of this iPCA enables it to work without microlens array focusing, which is otherwise required for photo excitation of selective photoconductive regions to avoid the destructive interference of emitted THz radiation from oppositely biased regions. Benefit of iPCA over single active region PCA is, photo excitation can be done at larger area hence avoiding the saturation effect at higher optical excitation density. The emitted THz radiation power from plasmonic-iPCAs is ~2 times more than the single active region plasmonic PCA at 200 mW optical excitation, which will further increase at higher optical powers. This design is expected to reduce fabrication cost of photoconductive THz sources and detectors.

  19. Development of a PYTHON-based emittance calculator at Fermilab Accelerator Science and Technology (FAST) facility

    Science.gov (United States)

    Green, A. T.

    Beam emittance is an important characteristic describing charged particle beams. In linear accelerators (linac), it is critical to characterize the beam phase space parameters and, in particular, to precisely measure transverse beam emittance. The quadrupole scan (quad-scan) is a well-established technique used to characterize transverse beam parameters in four-dimensional phase space, including beam emittance. A computational algorithm with PYTHON scripts has been developed to estimate beam parameters, in particular beam emittance, using the quad-scan technique in the electron linac at the Fermilab Accelerator Science and Technology (FAST) facility. This script has been implemented in conjunction with an automated quad-scan tool (also written in PYTHON) and has decreased the time it takes to perform a single quad-scan from an hour to a few minutes. From the experimental data, the emittance calculator quickly delivers several results including: geometrical and normalized transverse emittance, Courant-Snyder parameters, and plots of the beam size versus quadrupole field strength, among others. This paper will discuss the details of the techniques used, the results from several quad-scans preformed at FAST during the electron injector commissioning, and the PYTHON code used to obtain the results.

  20. Solid-state dye-sensitized mesoporous TiO{sub 2} solar cells with high photon-to-electron conversion efficiencies

    Energy Technology Data Exchange (ETDEWEB)

    Bach, U.; Comte, P.; Moser, J.E.; Gratzel, M. [Swiss Federal Institute of Technology, Laussanne (Switzerland). Inst. of Photonics and Interfaces; Lupo, D.; Spreitzer, H. [Hoechst Research and Technology Deutschland GmbH and Co., Frankfurt (Germany); Weissortel, F.; Salbeck, J. [Max-Planck-Institute fuer Polymerforschung, Mainz (Germany)

    1998-10-08

    Solar cells based on dye-sensitized mesoporous films of TiO{sub 2} are low-cost alternatives to conventional solid-state devices. Impressive solar-to-electrical energy conversion efficiencies have been achieved with such films when used in conjunction with liquid electrolytes. Practical advantages may be gained by the replacement of the liquid electrolyte with a solid charge-transport material. Inorganic p-type semiconductors and organic materials have been tested in this regard, but in all cases the incident monochromatic photon-to-electron conversion efficiency remained low. Here we describe a dye-sensitized heterojunction of TiO{sub 2} with the amorphous organic hole-transport material 2,2`,7,7`-tetrakis (N,N-di-p-methoxyphenyl-amine) 9,9`-spirobifluorene. (author)

  1. Long-lived and highly efficient green and blue phosphorescent emitters and device architectures for OLED displays

    Science.gov (United States)

    Eickhoff, Christian; Murer, Peter; Geßner, Thomas; Birnstock, Jan; Kröger, Michael; Choi, Zungsun; Watanabe, Soichi; May, Falk; Lennartz, Christian; Stengel, Ilona; Münster, Ingo; Kahle, Klaus; Wagenblast, Gerhard; Mangold, Hannah

    2015-09-01

    In this paper, two OLED device concepts are introduced. First, classical phosphorescent green carbene emitters with unsurpassed lifetime, combined with low voltage and high efficiency are presented and the associated optimized OLED stacks are explained. Second, a path towards highly efficient, long-lived deep blue systems is shown. The high efficiencies can be reached by having the charge-recombination on the phosphorescent carbene emitter while at the same time short emissive lifetimes are realized by fast energy transfer to the fluorescent emitter, which eventually allows for higher OLED stability in the deep blue. Device architectures, materials and performance data are presented showing that carbene type emitters have the potential to outperform established phosphorescent green emitters both in terms of lifetime and efficiency. The specific class of green emitters under investigation shows distinctly larger electron affinities (2.1 to 2.5 eV) and ionization potentials (5.6 to 5.8 eV) as compared to the "standard" emitter Ir(ppy)3 (5.0/1.6 eV). This difference in energy levels requires an adopted OLED design, in particular with respect to emitter hosts and blocking layers. Consequently, in the diode setup presented here, the emitter species is electron transporting or electron trapping. For said green carbene emitters, the typical peak wavelength is 525 nm yielding CIE color coordinates of (x = 0.33, y = 0.62). Device data of green OLEDs are shown with EQEs of 26 %. Driving voltage at 1000 cd/m2 is below 3 V. In an optimized stack, a device lifetime of LT95 > 15,000 h (1000 cd/m2) has been reached, thus fulfilling AMOLED display requirements.

  2. Evaluation of extremely small horizontal emittance

    Directory of Open Access Journals (Sweden)

    T. Okugi

    1999-02-01

    Full Text Available The KEK Accelerator Test Facility (KEK-ATF was constructed to develop technologies for producing a low-emittance beam which will be required by future linear colliders. The KEK-ATF consists of an injector linac, a damping ring, and a beam extraction line. The basic optical structure of the damping ring is a FOBO lattice, which reduces the horizontal dispersion at the center of the bending magnets and, as a consequence, can produce an extremely small emittance beam. To verify the performance of such a unique, low-emittance lattice, it is crucial to measure the horizontal emittance. The horizontal emittance was measured using wire scanners in the beam extraction line. Since the horizontal beam position was not stable, we established a method to correct the measured beam size for position fluctuation (“jitter” and we succeeded in the observation of the so far smallest horizontal emittance in any accelerator. The measured horizontal emittance was 1.37±0.03nm at a beam energy of 1.285 GeV and a bunch population of \\(3–5\\×10^{9}, in agreement with the design value of 1.27–1.34 nm at the beam energy and the bunch population.

  3. Multinozzle Emitter Arrays for Nanoelectrospray Mass Spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Mao, Pan; Wang, Hung-Ta; Yang, Peidong; Wang, Daojing

    2011-06-16

    Mass spectrometry (MS) is the enabling technology for proteomics and metabolomics. However, dramatic improvements in both sensitivity and throughput are still required to achieve routine MS-based single cell proteomics and metabolomics. Here, we report the silicon-based monolithic multinozzle emitter array (MEA), and demonstrate its proof-of-principle applications in high-sensitivity and high-throughput nanoelectrospray mass spectrometry. Our MEA consists of 96 identical 10-nozzle emitters in a circular array on a 3-inch silicon chip. The geometry and configuration of the emitters, the dimension and number of the nozzles, and the micropillar arrays embedded in the main channel, can be systematically and precisely controlled during the microfabrication process. Combining electrostatic simulation and experimental testing, we demonstrated that sharpened-end geometry at the stem of the individual multinozzle emitter significantly enhanced the electric fields at its protruding nozzle tips, enabling sequential nanoelectrospray for the high-density emitter array. We showed that electrospray current of the multinozzle emitter at a given total flow rate was approximately proportional to the square root of the number of its spraying-nozzles, suggesting the capability of high MS sensitivity for multinozzle emitters. Using a conventional Z-spray mass spectrometer, we demonstrated reproducible MS detection of peptides and proteins for serial MEA emitters, achieving sensitivity and stability comparable to the commercial capillary emitters. Our robust silicon-based MEA chip opens up the possibility of a fully-integrated microfluidic system for ultrahigh-sensitivity and ultrahigh-throughput proteomics and metabolomics.

  4. Silicon Carbide Emitter Turn-Off Thyristor

    Directory of Open Access Journals (Sweden)

    Jun Wang

    2008-01-01

    Full Text Available A novel MOS-controlled SiC thyristor device, the SiC emitter turn-off thyristor (ETO is a promising technology for future high-voltage switching applications because it integrates the excellent current conduction capability of a SiC thyristor with a simple MOS-control interface. Through unity-gain turn-off, the SiC ETO also achieves excellent Safe Operation Area (SOA and faster switching speeds than silicon ETOs. The world's first 4.5-kV SiC ETO prototype shows a forward voltage drop of 4.26 V at 26.5 A/cm2 current density at room and elevated temperatures. Tested in an inductive circuit with a 2.5 kV DC link voltage and a 9.56-A load current, the SiC ETO shows a fast turn-off time of 1.63 microseconds and a low 9.88 mJ turn-off energy. The low switching loss indicates that the SiC ETO could operate at about 4 kHz if 100 W/cm2 conduction and the 100 W/cm2 turn-off losses can be removed by the thermal management system. This frequency capability is about 4 times higher than 4.5-kV-class silicon power devices. The preliminary demonstration shows that the SiC ETO is a promising candidate for high-frequency, high-voltage power conversion applications, and additional developments to optimize the device for higher voltage (>5 kV and higher frequency (10 kHz are needed.

  5. Laser wire emittance measurement line AT CLIC

    CERN Document Server

    Garcia, H; Blair, G A; Aumeyr, T; Schulte, D; Stulle, F

    2011-01-01

    A precise measurement of the transverse beam size and beam emittances upstream of the final focus is essential for ensuring the full luminosity at future linear colliders. A scheme for the emittance measurements at the RTML line of the CLIC using laser-wire beam profile monitors is described. A lattice of the measurement line is discussed and results of simulations of statistical errors and of their impact on the accuracy of the emittance reconstruction are given. Laser wire systems suitable for CLIC and their main characteristics are discussed.

  6. Narrowband terahertz emitters using metamaterial films.

    Science.gov (United States)

    Alves, Fabio; Kearney, Brian; Grbovic, Dragoslav; Karunasiri, Gamani

    2012-09-10

    In this article we report on metamaterial-based narrowband thermal terahertz (THz) emitters with a bandwidth of about 1 THz. Single band emitters designed to radiate in the 4 to 8 THz range were found to emit as high as 36 W/m(2) when operated at 400 °C. Emission into two well-separated THz bands was also demonstrated by using metamaterial structures featuring more complex unit cells. Imaging of heated emitters using a microbolometer camera fitted with THz optics clearly showed the expected higher emissivity from the metamaterial structure compared to low-emissivity of the surrounding aluminum.

  7. Optimization of the emitter region and the metal grid of a concentrator silicon solar cell

    Institute of Scientific and Technical Information of China (English)

    Xing Yupeng; Han Peide; Fan Yujie; Wang Shuai; Liang Peng; Ye Zhou; Hu Shaoxu

    2013-01-01

    The optimizations of the emitter region and the metal grid of a concentrator silicon solar cell are illustrated.The optimizations are done under 1 sun,100 suns and 200 suns using the 2D numerical simulation tool TCAD software.The optimum finger spacing and its range decrease with the increase in sheet resistance and concentration ratio.The processes of the diffusion and oxidization in the manufacture flow of the silicon solar cells were simulated to get a series of typical emitter dopant profiles to optimize.The efficiency of the solar cell under 100 suns and 200 suns increased with the decrease in diffusion temperature and the increase in oxidation temperature and time when the diffusion temperature is lower than or equal to 865 ℃.The effect of sheet resistance of the emitter on series resistance and the conversion efficiency of the solar cell under concentration was discussed.

  8. Impact of substrate characteristics on performance of large area plasmonic photoconductive emitters.

    Science.gov (United States)

    Yardimci, Nezih T; Salas, Rodolfo; Krivoy, Erica M; Nair, Hari P; Bank, Seth R; Jarrahi, Mona

    2015-12-14

    We present a comprehensive analysis of terahertz radiation from large area plasmonic photoconductive emitters in relation with characteristics of device substrate. Specifically, we investigate the radiation properties of large area plasmonic photoconductive emitters fabricated on GaAs substrates that exhibit short carrier lifetimes through low-temperature substrate growth and through epitaxially embedded rare-earth arsenide (ErAs and LuAs) nanoparticles in superlattice structures. Our analysis indicates that the utilized substrate composition and growth process for achieving short carrier lifetimes are crucial in determining substrate resistivity, carrier drift velocity, and carrier lifetime, which directly impact optical-to-terahertz conversion efficiency, radiation power, radiation bandwidth, and reliability of large area plasmonic photoconductive emitters.

  9. Improved Rare-Earth Emitter Hollow Cathode

    Science.gov (United States)

    Goebel, Dan M.

    2011-01-01

    An improvement has been made to the design of the hollow cathode geometry that was created for the rare-earth electron emitter described in Compact Rare Earth Emitter Hollow Cathode (NPO-44923), NASA Tech Briefs, Vol. 34, No. 3 (March 2010), p. 52. The original interior assembly was made entirely of graphite in order to be compatible with the LaB6 material, which cannot be touched by metals during operation due to boron diffusion causing embrittlement issues in high-temperature refractory materials. Also, the graphite tube was difficult to machine and was subject to vibration-induced fracturing. This innovation replaces the graphite tube with one made out of refractory metal that is relatively easy to manufacture. The cathode support tube is made of molybdenum or molybdenum-rhenium. This material is easily gun-bored to near the tolerances required, and finish machined with steps at each end that capture the orifice plate and the mounting flange. This provides the manufacturability and robustness needed for flight applications, and eliminates the need for expensive e-beam welding used in prior cathodes. The LaB6 insert is protected from direct contact with the refractory metal tube by thin, graphite sleeves in a cup-arrangement around the ends of the insert. The sleeves, insert, and orifice plate are held in place by a ceramic spacer and tungsten spring inserted inside the tube. To heat the cathode, an insulating tube is slipped around the refractory metal hollow tube, which can be made of high-temperature materials like boron nitride or aluminum nitride. A screw-shaped slot, or series of slots, is machined in the outside of the ceramic tube to constrain a refractory metal wire wound inside the slot that is used as the heater. The screw slot can hold a single heater wire that is then connected to the front of the cathode tube by tack-welding to complete the electrical circuit, or it can be a double slot that takes a bifilar wound heater with both leads coming out

  10. Microscale Digital Vacuum Electronic Gates

    Science.gov (United States)

    Manohara, Harish (Inventor); Mojarradi, Mohammed M. (Inventor)

    2014-01-01

    Systems and methods in accordance with embodiments of the invention implement microscale digital vacuum electronic gates. In one embodiment, a microscale digital vacuum electronic gate includes: a microscale field emitter that can emit electrons and that is a microscale cathode; and a microscale anode; where the microscale field emitter and the microscale anode are disposed within at least a partial vacuum; where the microscale field emitter and the microscale anode are separated by a gap; and where the potential difference between the microscale field emitter and the microscale anode is controllable such that the flow of electrons between the microscale field emitter and the microscale anode is thereby controllable; where when the microscale anode receives a flow of electrons, a first logic state is defined; and where when the microscale anode does not receive a flow of electrons, a second logic state is defined.

  11. Superconducting wiggler magnets for beam-emittance damping rings

    CERN Document Server

    Schoerling, Daniel

    2012-01-01

    Ultra-low emittance beams with a high bunch charge are necessary for the luminosity performance of linear electron-positron colliders, such as the Compact Linear Collider (CLIC). An effective way to create ultra-low emittance beams with a high bunch charge is to use damping rings, or storage rings equipped with strong damping wiggler magnets. The remanent field of the permanent magnet materials and the ohmic losses in normal conductors limit the economically achievable pole field in accelerator magnets operated at around room temperature to below the magnetic saturation induction, which is 2.15 T for iron. In wiggler magnets, the pole field in the center of the gap is reduced further like the hyperbolic cosine of the ratio of the gap size and the period length multiplied by pi. Moreover, damping wiggler magnets require relatively large gaps because they have to accept the un-damped beam and to generate, at a small period length, a large magnetic flux density amplitude to effectively damp the beam emittance....

  12. Fowler Nordheim theory of carbon nanotube based field emitters

    Science.gov (United States)

    Parveen, Shama; Kumar, Avshish; Husain, Samina; Husain, Mushahid

    2017-01-01

    Field emission (FE) phenomena are generally explained in the frame-work of Fowler Nordheim (FN) theory which was given for flat metal surfaces. In this work, an effort has been made to present the field emission mechanism in carbon nanotubes (CNTs) which have tip type geometry at nanoscale. High aspect ratio of CNTs leads to large field enhancement factor and lower operating voltages because the electric field strength in the vicinity of the nanotubes tip can be enhanced by thousand times. The work function of nanostructure by using FN plot has been calculated with reverse engineering. With the help of modified FN equation, an important formula for effective emitting area (active area for emission of electrons) has been derived and employed to calculate the active emitting area for CNT field emitters. Therefore, it is of great interest to present a state of art study on the complete solution of FN equation for CNTs based field emitter displays. This manuscript will also provide a better understanding of calculation of different FE parameters of CNTs field emitters using FN equation.

  13. Fowler Nordheim theory of carbon nanotube based field emitters

    Energy Technology Data Exchange (ETDEWEB)

    Parveen, Shama; Kumar, Avshish [Department of Physics, Jamia Millia Islamia (Central University), New Delhi (India); Husain, Samina [Centre for Nanoscience and Nanotechnology, Jamia Millia Islamia (Central University), New Delhi (India); Husain, Mushahid, E-mail: mush_reslab@rediffmail.com [Department of Physics, Jamia Millia Islamia (Central University), New Delhi (India)

    2017-01-15

    Field emission (FE) phenomena are generally explained in the frame-work of Fowler Nordheim (FN) theory which was given for flat metal surfaces. In this work, an effort has been made to present the field emission mechanism in carbon nanotubes (CNTs) which have tip type geometry at nanoscale. High aspect ratio of CNTs leads to large field enhancement factor and lower operating voltages because the electric field strength in the vicinity of the nanotubes tip can be enhanced by thousand times. The work function of nanostructure by using FN plot has been calculated with reverse engineering. With the help of modified FN equation, an important formula for effective emitting area (active area for emission of electrons) has been derived and employed to calculate the active emitting area for CNT field emitters. Therefore, it is of great interest to present a state of art study on the complete solution of FN equation for CNTs based field emitter displays. This manuscript will also provide a better understanding of calculation of different FE parameters of CNTs field emitters using FN equation.

  14. Solar energy conversion with photon-enhanced thermionic emission

    Science.gov (United States)

    Kribus, Abraham; Segev, Gideon

    2016-07-01

    Photon-enhanced thermionic emission (PETE) converts sunlight to electricity with the combined photonic and thermal excitation of charge carriers in a semiconductor, leading to electron emission over a vacuum gap. Theoretical analyses predict conversion efficiency that can match, or even exceed, the efficiency of traditional solar thermal and photovoltaic converters. Several materials have been examined as candidates for radiation absorbers and electron emitters, with no conclusion yet on the best set of materials to achieve high efficiency. Analyses have shown the complexity of the energy conversion and transport processes, and the significance of several loss mechanisms, requiring careful control of material properties and optimization of the device structure. Here we survey current research on PETE modeling, materials, and device configurations, outline the advances made, and stress the open issues and future research needed. Based on the substantial progress already made in this young topic, and the potential of high conversion efficiency based on theoretical performance limits, continued research in this direction is very promising and may yield a competitive technology for solar electricity generation.

  15. Tuning the near-gap electronic structure of Cu2O by anion-cation co-doping for enhanced solar energy conversion

    Science.gov (United States)

    Si, Yuan; Yang, Hao-Ming; Wu, Hong-Yu; Huang, Wei-Qing; Yang, Ke; Peng, Ping; Huang, Gui-Fang

    2017-01-01

    Doping is an effective strategy to tune the electronic properties of semiconductors, but some side effects caused by mono-doping degrade the specific performance of matrixes. As a model system to minimize photoproduced electron-hole pairs recombination by anion-cation co-doping, we investigate the electronic structures and optical properties of (Fe+N) co-doped Cu2O using the first-principles calculations. Compared to the case of mono-doping, the FeCuNO (a Fe (N) atom substituting a Cu (O) atom) co-doping reduces the energy cost of doping as a consequence of the charge compensation between the iron and nitrogen impurities, which eliminates the isolated levels (induced by mono-dopant) in the band gap. Interestingly, it is found that the contributions of different host atoms (Cu and O) away from anion (N) and cation (Fe) dopants to the variation of near band gap electronic structure of the co-doped Cu2O are different. Moreover, co-doping reduces the band gap and increases the visible-light absorption of Cu2O. Both band gap reduction and low recombination rate are critical elements for efficient light-to-current conversion in co-doped semiconductor photocatalysts. These findings raise the prospect of using co-doped Cu2O with specifically engineered electronic properties in a variety of solar applications.

  16. Compliance with High-Intensity Radiated Fields Regulations - Emitter's Perspective

    Science.gov (United States)

    Statman, Joseph; Jamnejad, Vahraz; Nguyen, Lee

    2012-01-01

    NASA's Deep Space Network (DSN) uses high-power transmitters on its large antennas to communicate with spacecraft of NASA and its partner agencies. The prime reflectors of the DSN antennas are parabolic, at 34m and 70m in diameter. The DSN transmitters radiate Continuous Wave (CW) signals at 20 kW - 500 kW at X-band and S-band frequencies. The combination of antenna reflector size and high frequency results in a very narrow beam with extensive oscillating near-field pattern. Another unique feature of the DSN antennas is that they (and the radiated beam) move mostly at very slow sidereal rate, essentially identical in magnitude and at the opposite direction of Earth rotation.The DSN is in the process of revamping its documentation to provide analysis of the High Intensity Radiation Fields (HIRF) environment resulting from radio frequency radiation from DSN antennas for comparison to FAA regulations regarding certification of HIRF protection as outlined in the FAA regulations on HIRF protection for aircraft electrical and electronic systems (Title 14, Code of Federal Regulations (14 CFR) [section sign][section sign] 23.1308, 25.1317, 27.1317, and 29.1317).This paper presents work done at JPL, in consultation with the FAA. The work includes analysis of the radiated field structure created by the unique DSN emitters (combination of transmitters and antennas) and comparing it to the fields defined in the environments in the FAA regulations. The paper identifies areas that required special attention, including the implications of the very narrow beam of the DSN emitters and the sidereal rate motion. The paper derives the maximum emitter power allowed without mitigation and the mitigation zones, where required.Finally, the paper presents summary of the results of the analyses of the DSN emitters and the resulting DSN process documentation.

  17. B factory via conversion of 1 TeV electron beams into 1 TeV photon beams

    Energy Technology Data Exchange (ETDEWEB)

    Mtingwa, S.K.; Strikman, M.

    1989-01-01

    We derive formulae which describe the interaction of laser beams with electron beams. Specializing to the case of 1 TeV electron beams from the future generation of electron linear accelerators, we calculate the production rate of backscattered 1 TeV photons, and using these photons, we show that it is possible to organize the photoproduction of beauty particles so as to measure 10/sup 9/b/bar b/ pairs per year. This should be adequate to study rare decays and CP violation in B meson decay. 9 refs., 1 fig.

  18. Nonuniformity correction of cryogenic 512(2) emitter arrays: the five-minute 5% NUC using FIESTA

    Science.gov (United States)

    Thomas, Matthew C.; Newman, Donald D.; Frolli, Mark; Pritchett, Donald G.; Peterson, Curt

    2001-08-01

    In this paper we report on effects to correct the spatial radiance nonuniformities in four infrared emitter arrays in the mid-wave infrared. Using a table-top setup in which a 512 X 512 NODDS array was driven by the MRC FIESTA 8500 drive electronics, and the output radiance from the emitter array was captured by a 100% fill-factor InSb focal plane array with fast frame storage capabilities, we were able to improve the emitter radiance nonuniformities by up to a factor of six while collecting the emitter radiances using the sparse grid approach in only 5 minutes. We report on the custom FIESTA operating system we developed, paying particular attention to the real-time nonuniformity correction capabilities since this enabled the emitter nonuniformities to be minimized while the emitter movie was played at frame rates up to 180 Hz. We also report on the custom emitter data processing software we developed which enabled us to determine the radiance from four emitters and write out new, calibrated movies which displayed radiances with only 2% nonuniformity.

  19. Resemblance Coefficient Based Intrapulse Feature Extraction Approach for Radar Emitter Signals

    Institute of Scientific and Technical Information of China (English)

    ZHANGGexiang; JINWeidong; HULaizhao

    2005-01-01

    Radar emitter signal recognition plays an important role in electronic intelligence and electronic support measure systems. To enhance accurate recognition rate of advanced radar emitter signals to meet the requirement of modern electronic warfare, Resemblance coefficient (RC) approach is proposed to extract features from radar emitter signals with different intrapulse modulation laws. Definition of RC is given. Properties and advantages of RC are analyzed. Feature extraction algorithm using RC is described in detail. The noise-suppression performances of RC features are also analyzed. Subsequently, neural networks are used to design classifiers. Because RC contains the change and distribution information of amplitude, phase and frequency of radar emitter signals, RC can reflect the intrapulse modulation laws effectively. The results of theoretical analysis and simulation experiments show that RC features have good characteristic of not being sensitive to noise. 9 radar emitter signals are chosen to make the experiment of RC feature extraction and automatic recognition. A large number of experimental results show that good accurate recognition rate can be achieved using the proposed approach. It is proved to be a valid and practical approach.

  20. Beam emittance measurements on multicusp ion sources

    Energy Technology Data Exchange (ETDEWEB)

    Sarstedt, M.; Lee, Y.; Leung, K.N.; Perkins, L.T.; Pickard, D.S.; Weber, M.; Williams, M.D.

    1995-08-01

    Multicusp ion sources are used for various applications. Presently, the implementation of this type of ion source is planned for the development of an ion beam lithography machine, which will be used for the projection of sub-0.2 micron patterns onto a wafer substrate. Since, for this application, a very good beam quality and a small ion energy spread are required, emittance measurements have been performed on a multicusp ion source for various source conditions. It is shown that the installation of proper capacitors between the extraction electrodes is necessary to avoid rf-pickup, which otherwise leads to a distortion of the beam emittance. The influence of the magnetic filter field on the beam emittance has been investigated, and the beam emittance of a dc filament-discharge plasma has also been compared to that of an rf-generated plasma.

  1. Beam emittance measurements on multicusp ion sources

    Energy Technology Data Exchange (ETDEWEB)

    Sarstedt, M.; Lee, Y.; Leung, K.N. [and others

    1995-08-01

    Multicusp ion sources are used for various applications. Presently, the implementation of this type of ion source planned for the development of an ion beam lithography machine, which will be used for the projection of sub-0.2 {mu}m patterns onto a wafer substrate. Since, for this application, a very good beam quality and a small ion energy spread are required, emittance measurements have been performed on a multicusp ion source for various source conditions. It is shown that the installation of proper capacitors between the extraction electrodes is necessary to avoid rf-pickup, which otherwise leads to a distortion of the beam emittance. The influence of the magnetic filter field on the beam emittance has been investigated, and the beam emittance of a dc filament-discharge plasma has also been compared to that of an rf-generated plasma.

  2. Beam emittance measurements on multicusp ion sources

    Energy Technology Data Exchange (ETDEWEB)

    Sarstedt, M.; Lee, Y.; Leung, K.N.; Perkins, L.T.; Pickard, D.S.; Weber, M.; Williams, M.D. [Lawrence Berkeley National Laboratory, University of California, Berkeley, California 94720 (United States)

    1996-03-01

    Multicusp ion sources are used for various applications. Presently, the implementation of this type of ion source is planned for the development of an ion beam lithography machine, which will be used for the projection of sub-0.2 {mu}m patterns onto a wafer substrate. Since, for this application, a very good beam quality and a small ion energy spread are required, emittance measurements have been performed on a multicusp ion source for various source conditions. It is shown that the installation of proper capacitors between the extraction electrodes is necessary to avoid rf pickup, which otherwise leads to a distortion of the beam emittance. The influence of the magnetic filter field on the beam emittance has been investigated, and the beam emittance of a dc filament-discharge plasma has also been compared to that of a rf-generated plasma. {copyright} {ital 1996 American Institute of Physics.}

  3. Beam emittance measurements on multicusp ion sources

    Science.gov (United States)

    Sarstedt, M.; Lee, Y.; Leung, K. N.; Perkins, L. T.; Pickard, D. S.; Weber, M.; Williams, M. D.

    1996-03-01

    Multicusp ion sources are used for various applications. Presently, the implementation of this type of ion source is planned for the development of an ion beam lithography machine, which will be used for the projection of sub-0.2 μm patterns onto a wafer substrate. Since, for this application, a very good beam quality and a small ion energy spread are required, emittance measurements have been performed on a multicusp ion source for various source conditions. It is shown that the installation of proper capacitors between the extraction electrodes is necessary to avoid rf pickup, which otherwise leads to a distortion of the beam emittance. The influence of the magnetic filter field on the beam emittance has been investigated, and the beam emittance of a dc filament-discharge plasma has also been compared to that of a rf-generated plasma.

  4. Emitters of N-photon bundles.

    Science.gov (United States)

    Muñoz, C Sánchez; Del Valle, E; Tudela, A González; Müller, K; Lichtmannecker, S; Kaniber, M; Tejedor, C; Finley, J J; Laussy, F P

    2014-07-01

    Controlling the ouput of a light emitter is one of the basic tasks of photonics, with landmarks such as the laser and single-photon sources. The development of quantum applications makes it increasingly important to diversify the available quantum sources. Here, we propose a cavity QED scheme to realize emitters that release their energy in groups, or "bundles" of N photons, for integer N. Close to 100% of two-photon emission and 90% of three-photon emission is shown to be within reach of state of the art samples. The emission can be tuned with system parameters so that the device behaves as a laser or as a N-photon gun. The theoretical formalism to characterize such emitters is developed, with the bundle statistics arising as an extension of the fundamental correlation functions of quantum optics. These emitters will be useful for quantum information processing and for medical applications.

  5. Monochromatic gamma emitter for low energy quanta

    CERN Document Server

    Tomova, Z R; Mironova, S A

    2004-01-01

    The possibility of creating of a monochromatic gamma emitter of low energy quanta is analyzed. The idea is based on Daning's scheme. Except for purely scientific problems the monochromator is actual for therapy of wide range of diseases.

  6. Field emission behavior of carbon nanotube field emitters after high temperature thermal annealing

    Directory of Open Access Journals (Sweden)

    Yuning Sun

    2014-07-01

    Full Text Available The carbon nanotube (CNT field emitters have been fabricated by attaching a CNT film on a graphite rod using graphite adhesive material. The CNT field emitters showed much improved field emission properties due to increasing crystallinity and decreasing defects in CNTs after the high temperature thermal annealing at 900 °C in vacuum ambient. The CNT field emitters showed the low turn-on electric field of 1.15 V/μm, the low threshold electric field of 1.62 V/μm, and the high emission current of 5.9 mA which corresponds to a current density of 8.5 A/cm2. In addition, the CNT field emitters indicated the enhanced field emission properties due to the multi-stage effect when the length of the graphite rod increases. The CNT field emitter showed good field emission stability after the high temperature thermal annealing. The CNT field emitter revealed a focused electron beam spot without any focusing electrodes and also showed good field emission repeatability.

  7. Near-infrared-to-visible highly selective thermal emitters based on an intrinsic semiconductor.

    Science.gov (United States)

    Asano, Takashi; Suemitsu, Masahiro; Hashimoto, Kohei; De Zoysa, Menaka; Shibahara, Tatsuya; Tsutsumi, Tatsunori; Noda, Susumu

    2016-12-01

    Control of the thermal emission spectra of emitters will result in improved energy utilization efficiency in a broad range of fields, including lighting, energy harvesting, and sensing. In particular, it is challenging to realize a highly selective thermal emitter in the near-infrared-to-visible range, in which unwanted thermal emission spectral components at longer wavelengths are significantly suppressed, whereas strong emission in the near-infrared-to-visible range is retained. To achieve this, we propose an emitter based on interband transitions in a nanostructured intrinsic semiconductor. The electron thermal fluctuations are first limited to the higher-frequency side of the spectrum, above the semiconductor bandgap, and are then enhanced by the photonic resonance of the structure. Theoretical calculations indicate that optimized intrinsic Si rod-array emitters with a rod radius of 105 nm can convert 59% of the input power into emission of wavelengths shorter than 1100 nm at 1400 K. It is also theoretically indicated that emitters with a rod radius of 190 nm can convert 84% of the input power into emission of emissivity of 0.77 at a wavelength of 790 nm and a very low background emissivity of <0.02 to 0.05 at 1100 to 7000 nm, under operation at 1273 K. Use of a nanostructured intrinsic semiconductor that can withstand high temperatures is promising for the development of highly efficient thermal emitters operating in the near-infrared-to-visible range.

  8. Alpha-emitters for medical therapy workshop

    Energy Technology Data Exchange (ETDEWEB)

    Feinendegen, L.E.; McClure, J.J.

    1996-12-31

    A workshop on ``Alpha-Emitters for Medical Therapy`` was held May 30-31, 1996 in Denver Colorado to identify research goals and potential clinical needs for applying alpha-particle emitters and to provide DOE with sufficient information for future planning. The workshop was attended by 36 participants representing radiooncology, nuclear medicine, immunotherapy, radiobiology, molecular biology, biochemistry, radiopharmaceutical chemistry, dosimetry, and physics. This report provides a summary of the key points and recommendations arrived at during the conference.

  9. Computational characterization of competing energy and electron transfer states in bimetallic donor-acceptor systems for photocatalytic conversion

    Science.gov (United States)

    Fredin, Lisa A.; Persson, Petter

    2016-09-01

    The rapidly growing interest in photocatalytic systems for direct solar fuel production such as hydrogen generation from water splitting is grounded in the unique opportunity to achieve charge separation in molecular systems provided by electron transfer processes. In general, both photoinduced and catalytic processes involve complicated dynamics that depend on both structural and electronic effects. Here the excited state landscape of metal centered light harvester-catalyst pairs is explored using density functional theory calculations. In weakly bound systems, the interplay between structural and electronic factors involved can be constructed from the various mononuclear relaxed excited states. For this study, supramolecular states of electron transfer and excitation energy transfer character have been constructed from constituent full optimizations of multiple charge/spin states for a set of three Ru-based light harvesters and nine transition metal catalysts (based on Ru, Rh, Re, Pd, and Co) in terms of energy, structure, and electronic properties. The complete set of combined charge-spin states for each donor-acceptor system provides information about the competition of excited state energy transfer states with the catalytically active electron transfer states, enabling the identification of the most promising candidates for photocatalytic applications from this perspective.

  10. Computational characterization of competing energy and electron transfer states in bimetallic donor-acceptor systems for photocatalytic conversion.

    Science.gov (United States)

    Fredin, Lisa A; Persson, Petter

    2016-09-14

    The rapidly growing interest in photocatalytic systems for direct solar fuel production such as hydrogen generation from water splitting is grounded in the unique opportunity to achieve charge separation in molecular systems provided by electron transfer processes. In general, both photoinduced and catalytic processes involve complicated dynamics that depend on both structural and electronic effects. Here the excited state landscape of metal centered light harvester-catalyst pairs is explored using density functional theory calculations. In weakly bound systems, the interplay between structural and electronic factors involved can be constructed from the various mononuclear relaxed excited states. For this study, supramolecular states of electron transfer and excitation energy transfer character have been constructed from constituent full optimizations of multiple charge/spin states for a set of three Ru-based light harvesters and nine transition metal catalysts (based on Ru, Rh, Re, Pd, and Co) in terms of energy, structure, and electronic properties. The complete set of combined charge-spin states for each donor-acceptor system provides information about the competition of excited state energy transfer states with the catalytically active electron transfer states, enabling the identification of the most promising candidates for photocatalytic applications from this perspective.

  11. Conversational Dominance.

    Science.gov (United States)

    Esau, Helmut; Poth, Annette

    Details of conversational behavior can often not be interpreted until the social interaction, including the rights and obligations of the participants, their intent, the topic, etc., has been defined. This paper presents a model of conversation in which the conversational image a person presents in a given conversational situation is a function of…

  12. Dosimetry of Auger emitters: Physical and phenomenological approaches

    Energy Technology Data Exchange (ETDEWEB)

    Sastry, K.S.R.; Howell, R.W.; Rao, D.V.; Mylavarapu, V.B.; Kassis, A.I.; Adelstein, S.J.; Wright, H.A.; Hamm, R.N.; Turner, J.E.

    1987-01-01

    Recent radiobiological studies have demonstrated that Auger cascades can cause severe biological damage contrary to expectations based on conventional dosimetry. Several determinants govern these effects, including the nature of the Auger electron spectrum; localized energy deposition; cellular geometry; chemical form of the carrier; cellular localization, concentration, and subcellular distribution of the radionuclide. Conventional dosimetry is inadequate in that these considerations are ignored. Our results provide the basis for biophysical approaches toward subcellular dosimetry of Auger emitters in vitro and in vivo. 12 refs., 7 figs., 2 tabs.

  13. Feasibility of a ring FEL at low emittance storage rings

    Energy Technology Data Exchange (ETDEWEB)

    Agapov, I., E-mail: ilya.agapov@xfel.eu

    2015-09-01

    A scheme for generating coherent radiation at latest generation low emittance storage rings such as PETRA III at DESY (Balewski et al., 2004 [1]) is proposed. The scheme is based on focusing and subsequent defocusing of the electron beam in the longitudinal phase space at the undulator location. The expected performance characteristics are estimated for radiation in the wavelength range of 500–1500 eV. It is shown that the average brightness is increased by several orders of magnitude compared to spontaneous undulator radiation, which can open new perspectives for photon-hungry soft X-ray spectroscopy techniques.

  14. Tunable, Room Temperature CMOS-Compatible THz Emitters Based on Nonlinear Mixing in Microdisk Resonators

    Science.gov (United States)

    Sinha, Raju; Karabiyik, Mustafa; Ahmadivand, Arash; Al-Amin, Chowdhury; Vabbina, Phani Kiran; Shur, Michael; Pala, Nezih

    2016-03-01

    We propose and investigate in detail a novel tunable, compact, room temperature terahertz (THz) emitter using individual microdisk resonators for both optical and THz waves with the capability of radiating THz field in 0.5-10 THz range with tuning frequency resolution of 0.05 THz. Enhanced THz generation is achieved by employing a nonlinear optical disk resonator with a high value of second-order nonlinearity ( χ (2)) in order to facilitate the difference-frequency generation (DFG) via nonlinear mixing with the choice of two appropriate input infrared optical waves. Efficient coupling of infrared waves from bus to the nonlinear disk is ensured by satisfying critical coupling condition. Phase matching condition for efficient DFG process is also met by employing modal phase matching technique. Our simulations show that THz output power can be reached up to milliwatt (mW) level with high optical to THz conversion efficiency. The proposed source is Silicon on Insulator (SoI) technology compatible enabling the monolithic integration with Si complementary metal-oxide-semiconductor (CMOS) electronics including plasmonic THz detectors.

  15. A digital miniature x-ray tube with a high-density triode carbon nanotube field emitter

    Science.gov (United States)

    Jeong, Jin-Woo; Kang, Jun-Tae; Choi, Sungyoul; Kim, Jae-Woo; Ahn, Seungjoon; Song, Yoon-Ho

    2013-01-01

    We have fabricated a digital miniature x-ray tube (6 mm in diameter and 32 mm in length) with a high-density triode carbon nanotube (CNT) field emitter for special x-ray applications. The triode CNT emitter was densely formed within a diameter of below 4 mm with the focusing-functional gate. The brazing process enables us to obtain and maintain a desired vacuum level for the reliable electron emission from the CNT emitters after the vacuum packaging. The miniature x-ray tube exhibited a stable and reliable operation over 250 h in a pulse mode at an anode voltage of above 25 kV.

  16. A digital miniature x-ray tube with a high-density triode carbon nanotube field emitter

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Jin-Woo; Kang, Jun-Tae; Choi, Sungyoul [Nano Electron-source Creative Research Center, Electronics and Telecommunications Research Institute, 218 Gajeong-ro, Yuseong-gu, Daejeon 305-700 (Korea, Republic of); Kim, Jae-Woo; Song, Yoon-Ho [Nano Electron-source Creative Research Center, Electronics and Telecommunications Research Institute, 218 Gajeong-ro, Yuseong-gu, Daejeon 305-700 (Korea, Republic of); School of Advanced Device Engineering, University of Science and Technology, 217 Gajeong-ro, Yuseong-gu, Daejeon 305-350 (Korea, Republic of); Ahn, Seungjoon [Nano Electron-source Creative Research Center, Electronics and Telecommunications Research Institute, 218 Gajeong-ro, Yuseong-gu, Daejeon 305-700 (Korea, Republic of); Department of Information Display, Sun Moon University, Kalsan-ri, Tangjeong-myoon, Asan-si, Chungnam 336-708 (Korea, Republic of)

    2013-01-14

    We have fabricated a digital miniature x-ray tube (6 mm in diameter and 32 mm in length) with a high-density triode carbon nanotube (CNT) field emitter for special x-ray applications. The triode CNT emitter was densely formed within a diameter of below 4 mm with the focusing-functional gate. The brazing process enables us to obtain and maintain a desired vacuum level for the reliable electron emission from the CNT emitters after the vacuum packaging. The miniature x-ray tube exhibited a stable and reliable operation over 250 h in a pulse mode at an anode voltage of above 25 kV.

  17. Quantum optical waveform conversion

    CERN Document Server

    Kielpinski, D; Wiseman, HM

    2010-01-01

    Currently proposed architectures for long-distance quantum communication rely on networks of quantum processors connected by optical communications channels [1,2]. The key resource for such networks is the entanglement of matter-based quantum systems with quantum optical fields for information transmission. The optical interaction bandwidth of these material systems is a tiny fraction of that available for optical communication, and the temporal shape of the quantum optical output pulse is often poorly suited for long-distance transmission. Here we demonstrate that nonlinear mixing of a quantum light pulse with a spectrally tailored classical field can compress the quantum pulse by more than a factor of 100 and flexibly reshape its temporal waveform, while preserving all quantum properties, including entanglement. Waveform conversion can be used with heralded arrays of quantum light emitters to enable quantum communication at the full data rate of optical telecommunications.

  18. Near-field enhanced thermionic energy conversion for renewable energy recycling

    Science.gov (United States)

    Ghashami, Mohammad; Cho, Sung Kwon; Park, Keunhan

    2017-09-01

    This article proposes a new energy harvesting concept that greatly enhances thermionic power generation with high efficiency by exploiting the near-field enhancement of thermal radiation. The proposed near-field enhanced thermionic energy conversion (NETEC) system is uniquely configured with a low-bandgap semiconductor cathode separated from a thermal emitter with a subwavelength gap distance, such that a significant amount of electrons can be photoexcited by near-field thermal radiation to contribute to the enhancement of thermionic current density. We theoretically demonstrate that the NETEC system can generate electric power at a significantly lower temperature than the standard thermionic generator, and the energy conversion efficiency can exceed 40%. The obtained results reveal that near-field photoexcitation can enhance the thermionic power output by more than 10 times, making this hybrid system attractive for renewable energy recycling.

  19. Pack-Year Cigarette Smoking History for Determination of Lung Cancer Screening Eligibility. Comparison of the Electronic Medical Record versus a Shared Decision-making Conversation.

    Science.gov (United States)

    Modin, Hannah E; Fathi, Joelle T; Gilbert, Christopher R; Wilshire, Candice L; Wilson, Andrew K; Aye, Ralph W; Farivar, Alexander S; Louie, Brian E; Vallières, Eric; Gorden, Jed A

    2017-08-01

    Implementation of lung cancer screening programs is occurring across the United States. Programs vary in approaches to patient identification and shared decision-making. The eligibility of persons referred to screening programs, the outcomes of eligibility determination during shared decision-making, and the potential for the electronic medical record (EMR) to identify eligible individuals have not been well described. Our objectives were to assess the eligibility of individuals referred for lung cancer screening and compare information extracted from the EMR to information derived from a shared decision-making conversation for the determination of eligibility for lung cancer screening. We performed a retrospective analysis of individuals referred to a centralized lung cancer screening program serving a five-hospital health services system in Seattle, Washington between October 2014 and January 2016. Demographics, referral, and outcomes data were collected. A pack-year smoking history derived from the EMR was compared with the pack-year history obtained during a shared decision-making conversation performed by a licensed nurse professional representing the lung cancer screening program. A total of 423 individuals were referred to the program, of whom 59.6% (252 of 423) were eligible. Of those, 88.9% (224 of 252) elected screening. There was 96.2% (230 of 239) discordance in pack-year smoking history between the EMR and the shared decision-making conversation. The EMR underreported pack-years of smoking for 85.2% (196 of 230) of the participants, with a median difference of 29.2 pack-years. If identification of eligible individuals relied solely on the accuracy of the pack-year smoking history recorded in the EMR, 53.6% (128 of 239) would have failed to meet the 30-pack-year threshold for screening. Many individuals referred for lung cancer screening may be ineligible. Overreliance on the EMR for identification of individuals at risk may lead to missed opportunities

  20. Spectroscopic study of the authentic emitter of AMPPD chemiluminescence in alkaline aqueous solution

    NARCIS (Netherlands)

    Tu, L.; Wang, Y.; Yang, Y.; Bakker, B.H.; Kong, X.; Brouwer, A.M.; Buma, W.J.; Zhang, H.

    2010-01-01

    To design more effective CIEEL (chemically initiated electron exchange luminescence) systems demands a complete picture of the dynamics of the chemiluminescence, which is often a challenge. In this work, photoluminescence of the methyl m-oxybenzoate anion - the authentic emitter of AMPPD (3-[2-spiro

  1. Recent Results and Perspectives of the Low Emittance Photo Injector at PITZ

    CERN Document Server

    Stephan, Frank; Gensch, Ulrich; Grabosch, Hans Jürgen; HuiHan, Jang; Krasilnikov, Mikhail; Lipka, Dirk; Miltchev, Velizar; Oppelt, Anne; Petrosyan, Bagrat; Pose, Dietrich; Riemann, S; Staykov, Lazar

    2004-01-01

    The Photo Injector Test Facility at DESY Zeuthen (PITZ) was built to study the production of minimum transverse emittance electron beams for Free Electron Lasers. In November 2003 the electron beam from the RF gun was fully characterized at PITZ. For a bunch charge of 1 nC a minimum normalized projected beam emittance of 1.5 π mm mrad in the vertical plane and a minimum geometrical average of both transverse planes of 1.7 π mm mrad have been achieved. This fulfils the requirements of the VUV-FEL at DESY Hamburg. In this contribution an overview on the measured electron beam and high duty cycle RF parameters including transverse emittance, thermal emittance, bunch length, momentum and momentum spread will be given. In addition, planned major upgrades and first results towards fulfilling the even more challenging requirements for the European XFEL will be discussed. This includes the increase of the accelerating gradient on the photo-cathode and the improvement of the transverse and longitudinal l...

  2. High-temperature plasmonic thermal emitter for thermophotovotaics

    DEFF Research Database (Denmark)

    Liu, Jingjing; Guler, Urcan; Li, Wei

    2014-01-01

    We use titanium nitride (TiN) to demonstrate an ultra-thin plasmonic thermal emitter operating at high temperatures (830 K). The spectrally selective emitter exhibits a large emittance at around 2.5 μm and below, and suppresses emission at longer wavelengths.......We use titanium nitride (TiN) to demonstrate an ultra-thin plasmonic thermal emitter operating at high temperatures (830 K). The spectrally selective emitter exhibits a large emittance at around 2.5 μm and below, and suppresses emission at longer wavelengths....

  3. Fabrication and properties of field emission electron source based on planar-gate triode with ZnO emitters%平栅极氧化锌场致发射电子源的制备及性能研究∗

    Institute of Scientific and Technical Information of China (English)

    张永爱; 褚子航; 郑泳; 周雄图; 郭太良

    2015-01-01

    采用传统的光刻技术制备平栅极场致发射阴极阵列,利用水热法原位合成 ZnO 发射源,并组装成平栅极 ZnO 场致发射电子源;利用光学显微镜、SEM 和 XRD 表征其微观结构,分析 ZnO 发射源的生长机制,并结合场发射测试系统研究其发射特性.结果表明,ZnO 发射源是平均直径为300 nm 的六方纤锌矿氧化锌纳米棒,且沉积在平栅极场致发射阴极阵列的阴极电极表面.场发射测试表明,平栅极 ZnO 场致发射电子源的发射特性完全由栅极控制.当阳极电压为2000 V,器件的开启电压为150 V;当栅极电压为275 V 时,发射电流可达345μA;在栅极电压为260 V时,器件的发射电流波动范围为±5.5%左右,发光亮度高达750 cd/m2,表明该器件具有较好的场发射特性.%Field emission electron source based on planar-gate triode with ZnO emitters were fabricated by con-ventional photolithography and hydrothermal method.The optical microscopy,X-ray diffraction (XRD)and scanning electron microscopy (SEM)were employed to characterize the microstructures and morphologies of the as-grown samples and the growth mechanism was discussed.Its field emission characteristics were also investi-gated.The experimental results show that the average diameter of ZnO nanorods with hexagonal wurtzite struc-ture was approximately 300 nm and ZnO emitters are synthesized on the cathode of planar-gate triode.The field emission measurements show that the emission properties of electron source based on planar-gate triode with ZnO emitters are completely modulated by gate voltage.The turn-on voltage was around 150 V and anode cur-rent can reach to 345 μA when anode voltage and gate voltage was set to 2 000 and 275 V,respectively.The emission current fluctuation was approximately ± 5.5% for 400 min and luminous brightness can come to 750 cd/m2 at the gate voltage of 260 V,indicating that the fabricated device have a good emission performance.

  4. Conversion disorder

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/000954.htm Conversion disorder To use the sharing features on this page, please enable JavaScript. Conversion disorder is a mental condition in which a person ...

  5. Extension of the general thermal field equation for nanosized emitters

    Energy Technology Data Exchange (ETDEWEB)

    Kyritsakis, A., E-mail: akyritsos1@gmail.com; Xanthakis, J. P. [Department of Electrical and Computer Engineering, National Technical University of Athens, Zografou Campus, Athens 15700 (Greece)

    2016-01-28

    During the previous decade, Jensen et al. developed a general analytical model that successfully describes electron emission from metals both in the field and thermionic regimes, as well as in the transition region. In that development, the standard image corrected triangular potential barrier was used. This barrier model is valid only for planar surfaces and therefore cannot be used in general for modern nanometric emitters. In a recent publication, the authors showed that the standard Fowler-Nordheim theory can be generalized for highly curved emitters if a quadratic term is included to the potential model. In this paper, we extend this generalization for high temperatures and include both the thermal and intermediate regimes. This is achieved by applying the general method developed by Jensen to the quadratic barrier model of our previous publication. We obtain results that are in good agreement with fully numerical calculations for radii R > 4 nm, while our calculated current density differs by a factor up to 27 from the one predicted by the Jensen's standard General-Thermal-Field (GTF) equation. Our extended GTF equation has application to modern sharp electron sources, beam simulation models, and vacuum breakdown theory.

  6. Solid-state single-photon emitters

    Science.gov (United States)

    Aharonovich, Igor; Englund, Dirk; Toth, Milos

    2016-10-01

    Single-photon emitters play an important role in many leading quantum technologies. There is still no 'ideal' on-demand single-photon emitter, but a plethora of promising material systems have been developed, and several have transitioned from proof-of-concept to engineering efforts with steadily improving performance. Here, we review recent progress in the race towards true single-photon emitters required for a range of quantum information processing applications. We focus on solid-state systems including quantum dots, defects in solids, two-dimensional hosts and carbon nanotubes, as these are well positioned to benefit from recent breakthroughs in nanofabrication and materials growth techniques. We consider the main challenges and key advantages of each platform, with a focus on scalable on-chip integration and fabrication of identical sources on photonic circuits.

  7. Field-emission microscopy of the surface of an Ir-C-Cs point emitter

    Science.gov (United States)

    Bernatskii, D. P.; Pavlov, V. G.

    2013-12-01

    The emissive properties of an iridium-based point emitter with various forms of carbon (chemisorbed species, two-dimensional graphite structures) and cesium atoms adsorbed on the surface has been studied by the field-electron emission microscopy (FEM) and field-desorption microscopy (FDM) techniques. The FEE and FDM images of the emitter surface corresponding to various phase states of carbon have been obtained. It is established that two-dimensional graphite structures grow predominantly in the regions of (100) and (111) faces of iridium.

  8. Research on Radar Emitter Attribute Recognition Method

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    In order to solve emitter recognition problems in a practical reconnaissance environment, attribute mathematics is introduced. The basic concepts and theory of attribute set and attribute measure are described in detail. A new attribute recognition method based on attribute measure is presented in this paper. Application example is given, which demonstrates this new method is accurate and effective. Moreover, computer simulation for recognizing the emitter purpose is selected, and compared with classical statistical pattern recognition through simulation. The excellent experimental results demonstrate that this is a brand-new attribute recognition method as compared to existing statistical pattern recognition techniques.

  9. Quadrupole Transfer Function for Emittance Measurement

    CERN Document Server

    Cameron, Peter; Jansson, Andreas; Tan, Cheng-Yang

    2008-01-01

    Historically the use of the quadrupole moment measurement has been impeded by the requirement for large dynamic range, as well as measurement sensitivity to beam position. We investigate the use of the transfer function technique [1-3] in combination with the sensitivity and 160dB revolution line rejection of the direct diode detection analog front end [4] to open the possibility of an emittance diagnostic that may be implemented without operational complication, quasi- parasitic to the operation of existing tune measurement systems. Such a diagnostic would be particularly useful as an emittance monitor during acceleration ramp development in machines like RHIC and the LHC.

  10. Current Injection Pumping of Organic Light Emitters

    Science.gov (United States)

    1989-09-28

    MOT-OOO1AF I Current Injection Pumping of Organic Light Emitters Prepared by DI Jeffrey C. Buchholz E L ri: 8 James P. Stec OCT C "t989 Mary C...Schutte Micro -Optics Technologies, Inc. 8608 University Green #5 Middleton, WI 53562 28 September 1989 D,:?UqflON SA2". N’.’ _ Disuibunon Uanu-ted Contract...Title Report Date Current Injection Pumping of Organic Light Emitters 28 September 1989 Authors Jeffrey C. Buchholz, James P. Stec, Mary C. Schutte

  11. Coupling single emitters to quantum plasmonic circuits

    Science.gov (United States)

    Huck, Alexander; Andersen, Ulrik L.

    2016-09-01

    In recent years, the controlled coupling of single-photon emitters to propagating surface plasmons has been intensely studied, which is fueled by the prospect of a giant photonic nonlinearity on a nanoscaled platform. In this article, we will review the recent progress on coupling single emitters to nanowires towards the construction of a new platform for strong light-matter interaction. The control over such a platform might open new doors for quantum information processing and quantum sensing at the nanoscale and for the study of fundamental physics in the ultrastrong coupling regime.

  12. Coupling single emitters to quantum plasmonic circuits

    CERN Document Server

    Huck, Alexander

    2016-01-01

    In recent years the controlled coupling of single photon emitters to propagating surface plasmons has been intensely studied, which is fueled by the prospect of a giant photonic non-linearity on a nano-scaled platform. In this article we will review the recent progress on coupling single emitters to nano-wires towards the construction of a new platform for strong light-matter interaction. The control over such a platform might open new doors for quantum information processing and quantum sensing at the nanoscale, and for the study of fundamental physics in the ultra-strong coupling regime.

  13. Generating Periodic Terahertz Structures in a Relativistic Electron Beam through Frequency Down-Conversion of Optical Lasers

    Energy Technology Data Exchange (ETDEWEB)

    Dunning, Michael

    2012-07-19

    We report generation of density modulation at terahertz (THz) frequencies in a relativistic electron beam through laser modulation of the beam longitudinal phase space. We show that by modulating the energy distribution of the beam with two lasers, density modulation at the difference frequency of the two lasers can be generated after the beam passes through a chicane. In this experiment, density modulation around 10 THz was generated by down-converting the frequencies of an 800 nm laser and a 1550 nm laser. The central frequency of the density modulation can be tuned by varying the laser wavelengths, beam energy chirp, or momentum compaction of the chicane. This technique can be applied to accelerator-based light sources for generation of coherent THz radiation and marks a significant advance toward tunable narrow-band THz sources.

  14. Simultaneous fabrication of a microcavity absorber–emitter on a Ni–W alloy film

    Science.gov (United States)

    Nashun; Kagimoto, Masahiro; Iwami, Kentaro; Umeda, Norihiro

    2017-10-01

    A process for the simultaneous fabrication of microcavity structures on both sides of a film was proposed and demonstrated to develop a free-standing-type integrated absorber–emitter for use in solar thermophotovoltaic power generation systems. The absorber–emitter-integrated film comprised a heat-resistant Ni–W alloy deposited by electroplating. A two-step silicon mould was fabricated using deep reactive-ion etching and electron beam lithography. Cavity arrays with different unit sizes were successfully fabricated on both sides of the film; these arrays are suitable for use as a solar spectrum absorber and an infrared-selective emitter. Their emissivity spectra were characterised through UV–vis–NIR and Fourier transform infrared spectroscopy.

  15. Demonstration of Transverse-to-Longitudinal Emittance Exchange at the Fermilab Photoinjector

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, A.; Ruan, J.; Edwards, H.; Koeth, T.; Lumpkin, A.; Piot, P.; Santucci, J.; Sun, Y.-E; Thurman-Keup, R.; /Fermilab /Northern Illinois U.

    2010-05-01

    Phase space manipulation techniques within two degrees of freedom are foreseen to enhance the performances of next generation accelerators such as high-energy physics colliders and accelerator based light sources. At the Fermilab A0 photoinjector, a proof-of-principle experiment to demonstrate the exchange of the transverse and longitudinal emittances is ongoing. The emittance exchange beamline consists of a 3.9 GHz normal conducting deflecting mode cavity flanked by two doglegs. Electron bunches with charges of 250 pC and energy of 14.3 MeV are routinely sent through the exchanger. In this paper, we report our latest results on the demonstration of emittance exchange obtained with significantly improved beam diagnostics. We also compare our experimental results with a simple numerical model.

  16. Investigating higher order modes effects on thermionic RF gun transverse emittance

    Science.gov (United States)

    Rajabi, A.; Shokri, B.; Feghhi, S. A. H.

    2017-02-01

    As the excitation of higher order modes in high gradient accelerating cavities of the RF gun negatively influences electron beam quality, in the present work a theory is obtained based on generalizing Panofsky-Wenzel theorem to study the effect of transverse magnetic modes on transverse emittance growth of the RF gun. Based on this theory, the impact of higher order modes on transverse momentum is investigated. Based on analysis and simulation results, it is shown that different RF modes result in divergence or convergence effects on beam transverse dynamics. The presence of dipole and quadrupole modes can enhance the transverse emittance by 320 % and 450 % , respectively. The compound effect of the presence of two higher order modes results in 470 % transverse emittance growth.

  17. Low Emittance Growth in a LEBT with Un-Neutralized Section

    Energy Technology Data Exchange (ETDEWEB)

    Prost, Lionel [Fermilab; Carneiro, Jean-Paul [Fermilab; Shemyakin, Alexander [Fermilab

    2016-06-01

    In a Low Energy Beam Transport line (LEBT), the emittance growth due to the beam's own space charge is typically suppressed by way of neutralization from either electrons or ions, which originate from ionization of the background gas. In cases where the beam is chopped, the neutralization pattern changes throughout the beginning of the pulse, causing the Twiss parameters to differ significantly from their steady state values, which, in turn, may result in beam losses downstream. For a modest beam perveance, there is an alternative solution, in which the beam is kept un-neutralized in the portion of the LEBT that contains the chopper. The emittance can be nearly preserved if the transition to the un-neutralized section occurs where the beam exhibits low transverse tails. This report discusses the experimental realization of such a scheme at Fermilab's PXIE, where low beam emittance dilution was demonstrated

  18. Optimizations of transverse projected emittance at the photo-injector test facility at DESY, location Zeuthen

    Energy Technology Data Exchange (ETDEWEB)

    Rimjaem, S., E-mail: r.sakhorn@gmail.com [Deutsches Elektronen-Synchrotron (DESY), Platanenallee 6, 15738 Zeuthen (Germany); Stephan, F.; Krasilnikov, M. [Deutsches Elektronen-Synchrotron (DESY), Platanenallee 6, 15738 Zeuthen (Germany); Ackermann, W. [Technische Universtaet Darmstadt, Schossgartenstrasse 8, 64289 Darmstadt (Germany); Asova, G.; Baehr, J. [Deutsches Elektronen-Synchrotron (DESY), Platanenallee 6, 15738 Zeuthen (Germany); Gjonaj, E. [Technische Universtaet Darmstadt, Schossgartenstrasse 8, 64289 Darmstadt (Germany); Grabosch, H.J.; Hakobyan, L.; Haenel, M.; Ivanisenko, Y.; Khojoyan, M.; Klemz, G. [Deutsches Elektronen-Synchrotron (DESY), Platanenallee 6, 15738 Zeuthen (Germany); Lederer, S. [Deutsches Elektronen-Synchrotron (DESY), Notkestrasse 85, 22607 Hamburg (Germany); Mahgoub, M. [Deutsches Elektronen-Synchrotron (DESY), Platanenallee 6, 15738 Zeuthen (Germany); Michelato, P.; Monaco, L. [Istituto Nazionale di Fisica Nucleare, Sezione di Milano - LASA, Via F.lli Cervi 201, 20090 Segrate Milano (Italy); Nozdrin, M.; O' Shea, B.; Otevrel, M. [Deutsches Elektronen-Synchrotron (DESY), Platanenallee 6, 15738 Zeuthen (Germany); and others

    2012-04-11

    High brightness electron sources for linac based short-wavelength free-electron lasers are developed and optimized for small transverse projected emittance at the photo-injector test facility at DESY, location Zeuthen (PITZ). A major part of the measurement program at PITZ is dedicated to transverse phase space optimization in order to fulfill the requirements of the European X-ray free-electron laser (European XFEL). A laser-driven RF-gun, treated with a dry-ice sublimation-impulse cleaning technique, a new photocathode laser system allowing short rise and fall times of the flat-top temporal distribution as well as several new diagnostic components have been installed at PITZ in 2008. The electrons generated via the photo-effect at a cesium telluride (Cs{sub 2}Te) cathode are accelerated by a 1.6 cell L-band RF-gun cavity with a maximum accelerating gradient at the cathode of about 60 MV/m. The transverse projected emittance is measured using a single slit scan technique. In the 2008-2009 run period, a detailed characterization of the projected transverse emittance was performed at different operating conditions. Optimizations and measurement results as well as simulation predictions of the transverse projected emittance for bunch charges of 1, 0.5, 0.25 and 0.1 nC are presented and discussed in this paper. The geometric mean of the normalized projected rms emittance in both transverse directions for an electron bunch charge of 1 nC was measured to be 0.89{+-}0.01 mm mrad for a 100% rms phase-space distribution.

  19. Shortwave-infrared (SWIR emitters for biological imaging: a review of challenges and opportunities

    Directory of Open Access Journals (Sweden)

    Thimsen Elijah

    2017-08-01

    Full Text Available Shortwave infrared radiation (SWIR is the portion of the electromagnetic spectrum from approximately 900 nm to 2500 nm. Recent advances in imaging systems have expanded the application of SWIR emitters from traditional fields in materials science to biomedical imaging, and the new detectors in SWIR opened an opportunity of deep tissue imaging. Achieving deep photon penetration while maintaining high resolution is one of the main objectives and challenges in bioimaging used for the investigation of diverse processes in living organisms. The application of SWIR emitters in biological settings is, however, hampered by low quantum efficiency. So far, photoluminescent properties in the SWIR region have not been improved by extending concepts that have been developed for the visible (400–650 nm and near-infrared (NIR, 700–900 nm wavelengths, which indicates that the governing behavior is fundamentally different in the SWIR. The focus of this minireview is to examine the mechanisms behind the low efficiency of SWIR emitters as well as to highlight the progress in their design for biological applications. Several common mechanisms will be considered in this review: (a the effect of the energy gap between the excited and ground state on the quantum efficiency, (b the coupling of the excited electronic states in SWIR emitters to vibrational states in the surrounding matrix, and (c the role of environment in quenching the excited states. General strategies to improve the quantum yields for a diverse type of SWIR emitters will be also presented.

  20. MIRAGE: developments in IRSP systems, RIIC design, emitter fabrication, and performance

    Science.gov (United States)

    Bryant, Paul; Oleson, Jim; James, Jay; McHugh, Steve; Lannon, John; Vellenga, David; Goodwin, Scott; Huffman, Alan; Solomon, Steve; Goldsmith, George C., II

    2005-05-01

    SBIR's family of MIRAGE infrared scene projection systems is undergoing significant growth and expansion. The first two lots of production IR emitters have completed fabrication at Microelectronics Center of North Carolina/Research and Development Institute (MCNC-RDI), and the next round(s) of emitter production has begun. These latest emitter arrays support programs such as Large Format Resistive Array (LFRA), Optimized Array for Space-based Infrared Simulation (OASIS), MIRAGE 1.5, and MIRAGE II. We present the latest performance data on emitters fabricated at MCNC-RDI, plus integrated system performance on recently completed IRSP systems. Teamed with FLIR Systems/Indigo Operations, SBIR and the Tri-Services IRSP Working Group have completed development of the CMOS Read-In Integrated Circuit (RIIC) portion of the Wide Format Resistive Array (WFRA) program-to extend LFRA performance to a 768 x 1536 "wide screen" projection configuration. WFRA RIIC architecture and performance is presented. Finally, we summarize development of the LFRA Digital Emitter Engine (DEE) and OASIS cryogenic package assemblies, the next-generation Command & Control Electronics (C&CE).

  1. MIRAGE: developments in IRSP system development, RIIC design, emitter fabrication, and performance

    Science.gov (United States)

    Bryant, Paul; Oleson, Jim; James, Jay; Lindberg, Brian; Lannon, John; Vellenga, David; Goodwin, Scott; Huffman, Alan; Pace, Casey; Solomon, Steven L.

    2004-08-01

    Santa Barbara Infrared's (SBIR) family of MIRAGE infrared scene projection systems is undergoing significant growth and expansion. The first lot of production IR emitters is in fabrication at Microelectronics Center of North Carolina/Research and Development Institute (MCNC-RDI), the state-of-the-art MEMS foundry and R&D center which completed prototype fabrication in early 2003. The latest emitter arrays are being produced in support of programs such as Large Format Resistive Array (LFRA) and MIRAGE 1.5, MIRAGE II, and OASIS. The goal of these new development programs is to increase maximum scene temperature, decrease radiance rise time, support cryogenic operation, and improve operability and yield. After having completed an extremely successful prototype run in 2003, SBIR and MCNC-RDI have implemented a variety of emitter process improvements aimed at maximizing performance and process yield. SBIR has also completed development and integration of the next-generation MIRAGE command and control electronics (C&CE), an upgraded calibration radiometry system (CRS), and has developed test equipment and facilities for use in MIRAGE device wafer probing, test, evaluation, diagnostic, and assembly processes. We present the latest emitter performance data, an overview of emitter foundry processing and packaging improvements, and an update on MIRAGE II, LFRA, and OASIS development programs.

  2. Experimental studies of emittance growth and energy spread in a photocathode RF gun

    CERN Document Server

    Yang, J; Okada, Y; Yorozu, M; Yanagida, T; Endo, A

    2002-01-01

    In this paper we report on a low emittance electron source, based on a photocathode RF gun, a solenoid magnet and a subsequent linac. The dependencies of the beam transverse emittance and relative energy spread with respect to the laser injection phase of the radio-frequency (RF) gun, the RF phase of the linac and the bunch charge were investigated experimentally. It was found that a lower beam emittance is observed when the laser injection phase in the RF gun is low. The emittance increases almost linearly with the bunch charge under a constant solenoid magnetic field. The corrected relative energy spread of the beam is not strongly dependent on the bunch charge. Finally, an optimal normalized rms transverse emittance of 1.91+-0.28 pi mm mrad at a bunch charge of 0.6 nC was obtained when the RF gun was driven by a picosecond Nd:YAG laser. A corrected relative rms energy spread of 0.2-0.25% at a bunch charge of 0.3-2 nC was obtained after the beam was accelerated to 14 MeV by the subsequent linac.

  3. Shortwave-infrared (SWIR) emitters for biological imaging: a review of challenges and opportunities

    Science.gov (United States)

    Thimsen, Elijah; Sadtler, Bryce; Berezin, Mikhail Y.

    2017-06-01

    Shortwave infrared radiation (SWIR) is the portion of the electromagnetic spectrum from approximately 900 nm to 2500 nm. Recent advances in imaging systems have expanded the application of SWIR emitters from traditional fields in materials science to biomedical imaging, and the new detectors in SWIR opened an opportunity of deep tissue imaging. Achieving deep photon penetration while maintaining high resolution is one of the main objectives and challenges in bioimaging used for the investigation of diverse processes in living organisms. The application of SWIR emitters in biological settings is, however, hampered by low quantum efficiency. So far, photoluminescent properties in the SWIR region have not been improved by extending concepts that have been developed for the visible (400-650 nm) and near-infrared (NIR, 700-900 nm) wavelengths, which indicates that the governing behavior is fundamentally different in the SWIR. The focus of this minireview is to examine the mechanisms behind the low efficiency of SWIR emitters as well as to highlight the progress in their design for biological applications. Several common mechanisms will be considered in this review: (a) the effect of the energy gap between the excited and ground state on the quantum efficiency, (b) the coupling of the excited electronic states in SWIR emitters to vibrational states in the surrounding matrix, and (c) the role of environment in quenching the excited states. General strategies to improve the quantum yields for a diverse type of SWIR emitters will be also presented.

  4. The generation and acceleration of low emittance flat beams for future linear colliders

    Energy Technology Data Exchange (ETDEWEB)

    Raubenheimer, T.O.

    1991-11-01

    Many future linear collider designs call for electron and positron beams with normalized rms horizontal and vertical emittances of {gamma}{epsilon}{sub x} = 3{times}10{sup {minus}6} m-rad and {gamma}{epsilon}{sub y} = 3{times}10{sup {minus}8} m-rad; these are a factor of 10 to 100 below those observed in the Stanford Linear Collider. In this dissertation, we examine the feasibility of achieving beams with these very small vertical emittances. We examine the limitations encountered during both the generation and the subsequent acceleration of such low emittance beams. We consider collective limitations, such as wakefields, space charge effects, scattering processes, and ion trapping; and also how intensity limitations, such as anomalous dispersion, betatron coupling, and pulse-to-pulse beam jitter. In general, the minimum emittance in both the generation and the acceleration stages is limited by the transverse misalignments of the accelerator components. We describe a few techniques of correcting the effect of these errors, thereby easing the alignment tolerances by over an order of magnitude. Finally, we also calculate ``fundamental`` limitations on the minimum vertical emittance; these do not constrain the current designs but may prove important in the future.

  5. The generation and acceleration of low emittance flat beams for future linear colliders

    Energy Technology Data Exchange (ETDEWEB)

    Raubenheimer, T.O.

    1991-11-01

    Many future linear collider designs call for electron and positron beams with normalized rms horizontal and vertical emittances of {gamma}{epsilon}{sub x} = 3{times}10{sup {minus}6} m-rad and {gamma}{epsilon}{sub y} = 3{times}10{sup {minus}8} m-rad; these are a factor of 10 to 100 below those observed in the Stanford Linear Collider. In this dissertation, we examine the feasibility of achieving beams with these very small vertical emittances. We examine the limitations encountered during both the generation and the subsequent acceleration of such low emittance beams. We consider collective limitations, such as wakefields, space charge effects, scattering processes, and ion trapping; and also how intensity limitations, such as anomalous dispersion, betatron coupling, and pulse-to-pulse beam jitter. In general, the minimum emittance in both the generation and the acceleration stages is limited by the transverse misalignments of the accelerator components. We describe a few techniques of correcting the effect of these errors, thereby easing the alignment tolerances by over an order of magnitude. Finally, we also calculate fundamental'' limitations on the minimum vertical emittance; these do not constrain the current designs but may prove important in the future.

  6. Interdigitated photovoltaic power conversion device

    Science.gov (United States)

    Ward, James Scott; Wanlass, Mark Woodbury; Gessert, Timothy Arthur

    1999-01-01

    A photovoltaic power conversion device has a top surface adapted to receive impinging radiation. The device includes at least two adjacent, serially connected cells. Each cell includes a semi-insulating substrate and a lateral conductivity layer of a first doped electrical conductivity disposed on the substrate. A base layer is disposed on the lateral conductivity layer and has the same electrical charge conductivity thereof. An emitter layer of a second doped electrical conductivity of opposite electrical charge is disposed on the base layer and forms a p-n junction therebetween. A plurality of spaced channels are formed in the emitter and base layers to expose the lateral conductivity layer at the bottoms thereof. A front contact grid is positioned on the top surface of the emitter layer of each cell. A first current collector is positioned along one outside edge of at least one first cell. A back contact grid is positioned in the channels at the top surface of the device for engagement with the lateral conductivity layer. A second current collector is positioned along at least one outside edge of at least one oppositely disposed second cell. Finally, an interdigitation mechanism is provided for serially connecting the front contact grid of one cell to the back contact grid of an adjacent cell at the top surface of the device.

  7. Optimization of an Electron Transport Layer to Enhance the Power Conversion Efficiency of Flexible Inverted Organic Solar Cells

    Directory of Open Access Journals (Sweden)

    Lee Kang Hyuck

    2010-01-01

    Full Text Available Abstract The photovoltaic (PV performance of flexible inverted organic solar cells (IOSCs with an active layer consisting of a blend of poly(3-hexylthiophene and [6, 6]-phenyl C61-butlyric acid methyl ester was investigated by varying the thicknesses of ZnO seed layers and introducing ZnO nanorods (NRs. A ZnO seed layer or ZnO NRs grown on the seed layer were used as an electron transport layer and pathway to optimize PV performance. ZnO seed layers were deposited using spin coating at 3,000 rpm for 30 s onto indium tin oxide (ITO-coated polyethersulphone (PES substrates. The ZnO NRs were grown using an aqueous solution method at a low temperature (90°C. The optimized device with ZnO NRs exhibited a threefold increase in PV performance compared with that of a device consisting of a ZnO seed layer without ZnO NRs. Flexible IOSCs fabricated using ZnO NRs with improved PV performance may pave the way for the development of PV devices with larger interface areas for effective exciton dissociation and continuous carrier transport paths.

  8. On the perspectives of wide-band gap power devices in electronic-based power conversion for renewable systems

    Energy Technology Data Exchange (ETDEWEB)

    Vasconcelos Araujo, Samuel

    2013-10-01

    The high breakdown field from WBG materials allows the construction of unipolar devices with very low specific chip resistance mainly characterized by very low conduction and switching losses, even at high blocking voltages. Suitable concepts for SiC and GaN range from traditional FET structures driven by a MOS interface or a PN-Junction, bipolar devices and even high-electron mobility transistors (HEMT). A detailed revision of the literature will be performed in this work with the objective of providing a broad overview of possible approaches, along with inherent advantages and limitations. In addition to this, a benchmarking of several SiC-based devices technologies rated for 1200 V and 1700 V will be performed against their state-of-the-art Silicon-counterparts. Concerning the application of wide band gap devices in renewable energy systems, a significant cost reduction potential can be obtained due to smaller expenditure with magnetic filters and cooling, alongside higher efficiency levels. These aspects will be discussed in details in order to identify constraints and bottlenecks at application level with special focus on photovoltaic and wind power systems.

  9. Optimization of an Electron Transport Layer to Enhance the Power Conversion Efficiency of Flexible Inverted Organic Solar Cells.

    Science.gov (United States)

    Lee, Kang Hyuck; Kumar, Brijesh; Park, Hye-Jeong; Kim, Sang-Woo

    2010-08-31

    The photovoltaic (PV) performance of flexible inverted organic solar cells (IOSCs) with an active layer consisting of a blend of poly(3-hexylthiophene) and [6, 6]-phenyl C(61)-butlyric acid methyl ester was investigated by varying the thicknesses of ZnO seed layers and introducing ZnO nanorods (NRs). A ZnO seed layer or ZnO NRs grown on the seed layer were used as an electron transport layer and pathway to optimize PV performance. ZnO seed layers were deposited using spin coating at 3,000 rpm for 30 s onto indium tin oxide (ITO)-coated polyethersulphone (PES) substrates. The ZnO NRs were grown using an aqueous solution method at a low temperature (90°C). The optimized device with ZnO NRs exhibited a threefold increase in PV performance compared with that of a device consisting of a ZnO seed layer without ZnO NRs. Flexible IOSCs fabricated using ZnO NRs with improved PV performance may pave the way for the development of PV devices with larger interface areas for effective exciton dissociation and continuous carrier transport paths.

  10. Spectroscopic diagnostics of electron temperature and energy conversion efficiency of laser-sustained plasma in flowing argon

    Science.gov (United States)

    Mazumder, J.; Krier, H.; Chen, X.

    1988-08-01

    Laser sustained plasmas are often formed during laser materials interaction. The University's 10 kW CW CO2 laser has been used to study argon plasmas for the application to laser supported propulsion and laser materials processing. The spectroscopic diagnostic method has been applied to study laser-sustained plasmas in 1 atmosphere pure argon gas flow with an f/7 on-axis laser focusing scheme. High flow speeds of 2 to 10 m/sec are achieved. Plasma electron temperatures distributions are determined from the 415.8 nm Ar1 line and its adjacent continuum intensities. Plasma core temperatures as high as 20,000 K are reported. The total absorption of the incident laser power and the radiation loss by the plasma are calculated from the temperature distribution. Results indicated that up to 86 percent of the incident laser power can be absorbed and nearly 60 percent of the incident laser power can be retained by the flowing argon gas to provide thrust. Further research is called for in the Laser Induced Fluorescence (LIF) technique for diagnostics of the downstream mixing zone and the plasma outer region. Experiments over a wider range of operating conditions, as well as multiple plasma testings, are required to find the optimum operating scheme.

  11. Remarkably High Conversion Efficiency of Inverted Bulk Heterojunction Solar Cells: From Ultrafast Laser Spectroscopy and Electron Microscopy to Device Fabrication and Optimization

    KAUST Repository

    Alsulami, Qana

    2016-04-10

    In organic donor-acceptor systems, ultrafast interfacial charge transfer (CT), charge separation (CS), and charge recombination (CR) are key determinants of the overall performance of photovoltaic devices. However, a profound understanding of these photophysical processes at device interfaces remains superficial, creating a major bottleneck that circumvents advancements and the optimization of these solar cells. Here, results from time-resolved laser spectroscopy and high-resolution electron microscopy are examined to provide the fundamental information necessary to fabricate and optimize organic solar cell devices. In real time, CT and CS are monitored at the interface between three fullerene acceptors (FAs) (PC71BM, PC61BM, and IC60BA) and the PTB7-Th donor polymer. Femtosecond transient absorption (fs-TA) data demonstrates that photoinduced electron transfer from the PTB7-Th polymer to each FA occurs on the sub-picosecond time scale, leading to the formation of long-lived radical ions. It is also found that the power conversion efficiency improves from 2% in IC60BA-based solar cells to >9% in PC71BM-based devices, in support of our time-resolved results. The insights reported in this manuscript provide a clear understanding of the key variables involved at the device interface, paving the way for the exploitation of efficient CS and subsequently improving the photoconversion efficiency. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Longitudinal emittance measurements at REX-ISOLDE

    CERN Document Server

    Fraser, M A; Jones, R.M.; Jones, R M; Pasini, M; Posocco, P A; Voulot, D; Wenander, F

    2012-01-01

    We report on measurements of the longitudinal emittance at the Radioactive ion beam EXperiment (REX) at ISOLDE, CERN. The rms longitudinal emittance was measured as 0.34 ± 0.08 π ns keV/u at the output of the RFQ and as 0.36 ± 0.04π ns keV/u in front of the third 7-gap split-ring resonator (7G3) using the three-gradient technique; systematic errors are not included but are estimated at approximately 10%. The 86% emittance was measured a factor of approximately 4.4 times larger than the rms emittance at 1.48 ± 0.2 and 1.55 ± 0.12π ns keV/u at the RFQ and 7G3, respectively. The REX switchyard magnet was used as a spectrometer to analyse the energy spread of the beam as it was manipulated by varying the voltage of the rebuncher (ReB) and 7G3 cavities operating at non-accelerating phases. The transfer matrix for a multi-gap bunching cavity is derived and suitably truncated to allow for the accurate reconstruction of the beam parameters from measurement. The technique for measuring the energy spread was rig...

  13. Improvement of the voltage-controlled negative resistance of a porous silicon emitter using cathode reduction and electro-pretreatment

    Science.gov (United States)

    He, Li; Zhang, Xiaoning; Wang, Wenjiang; Zhao, Xiaoning

    2016-09-01

    A new composite treatment method combining cathode reduction (CR) and electro-pretreatment (EP) is proposed to improve the voltage-controlled negative resistance (VCNR) of porous silicon (PS) emitters. Four groups of PS emitters were treated, with nothing, CR, EP, and a combination of CR and EP, during different preparation stages. The experimental results indicate that both CR and EP improved the VCNR property and the emission characteristics of the PS emitter. The most favorable results occurred for the electron emitter treated with a combination of CR-EP. A peak-to-valley current ratio of 1.06 and an emission current density of 150 µA cm-2, which are the lowest value and approximately twice that of other samples, respectively, were obtained. In addition, the operating stability of the PS emitter also improved significantly compared with the two methods alone. Scanning electron microscopy, atomic force microscopy, and energy dispersive x-ray spectrometry results demonstrate that the improvements of the VCNR and the emission characteristics of PS emitters are due to the content variation of defects, impurities, and unstable microstructures in the PS layer under the influence of CR and EP. The mechanism of VCNR behavior is explained by a proposed energy band model, which is consistent with the experimental results.

  14. Secondary emission electron gun using external primaries

    Science.gov (United States)

    Srinivasan-Rao, Triveni; Ben-Zvi, Ilan

    2009-10-13

    An electron gun for generating an electron beam is provided, which includes a secondary emitter. The secondary emitter includes a non-contaminating negative-electron-affinity (NEA) material and emitting surface. The gun includes an accelerating region which accelerates the secondaries from the emitting surface. The secondaries are emitted in response to a primary beam generated external to the accelerating region. The accelerating region may include a superconducting radio frequency (RF) cavity, and the gun may be operated in a continuous wave (CW) mode. The secondary emitter includes hydrogenated diamond. A uniform electrically conductive layer is superposed on the emitter to replenish the extracted current, preventing charging of the emitter. An encapsulated secondary emission enhanced cathode device, useful in a superconducting RF cavity, includes a housing for maintaining vacuum, a cathode, e.g., a photocathode, and the non-contaminating NEA secondary emitter with the uniform electrically conductive layer superposed thereon.

  15. Secondary emission electron gun using external primaries

    Science.gov (United States)

    Srinivasan-Rao, Triveni; Ben-Zvi, Ilan; Kewisch, Jorg; Chang, Xiangyun

    2007-06-05

    An electron gun for generating an electron beam is provided, which includes a secondary emitter. The secondary emitter includes a non-contaminating negative-electron-affinity (NEA) material and emitting surface. The gun includes an accelerating region which accelerates the secondaries from the emitting surface. The secondaries are emitted in response to a primary beam generated external to the accelerating region. The accelerating region may include a superconducting radio frequency (RF) cavity, and the gun may be operated in a continuous wave (CW) mode. The secondary emitter includes hydrogenated diamond. A uniform electrically conductive layer is superposed on the emitter to replenish the extracted current, preventing charging of the emitter. An encapsulated secondary emission enhanced cathode device, useful in a superconducting RF cavity, includes a housing for maintaining vacuum, a cathode, e.g., a photocathode, and the non-contaminating NEA secondary emitter with the uniform electrically conductive layer superposed thereon.

  16. Nanoelectrospray emitter arrays providing interemitter electric field uniformity.

    Science.gov (United States)

    Kelly, Ryan T; Page, Jason S; Marginean, Ioan; Tang, Keqi; Smith, Richard D

    2008-07-15

    Arrays of electrospray ionization (ESI) emitters have been reported previously as a means of enhancing ionization efficiency or signal intensity. A key challenge when working with multiple, closely spaced ESI emitters is overcoming the deleterious effects caused by electrical interference among neighboring emitters. Individual emitters can experience different electric fields depending on their relative position in the array, such that it becomes difficult to operate all of the emitters optimally for a given applied potential. In this work, we have developed multi-nanoESI emitters arranged with a circular pattern, which enable the constituent emitters to experience a uniform electric field. The performance of the circular emitter array was compared to a single emitter and to a previously developed linear emitter array, which verified that improved electric field uniformity was achieved with the circular arrangement. The circular arrays were also interfaced with a mass spectrometer via a matching multicapillary inlet, and the results were compared with those obtained using a single emitter. By minimizing interemitter electric field inhomogeneities, much larger arrays having closer emitter spacing should be feasible.

  17. What is so super about super-emitters? Characterizing methane high emitters from natural gas infrastructure

    Science.gov (United States)

    Zavala Araiza, D.; Lyon, D. R.; Alvarez, R.; Harriss, R. C.; Palacios, V.; Hamburg, S.

    2015-12-01

    Methane emissions across the natural gas supply chain are dominated at any one time by a few high-emitters (super-emitters or fat-tail of the distribution), often underrepresented in published datasets used to construct emission inventories. Characterization of high-emitters is essential for improving emission estimates based on atmospheric data (top-down) and emission inventories (bottom-up). The population of high-emitters (e.g. 10-20% of sites that account for 80-90% of the emissions) is temporally and spatially dynamic. As a consequence, it is challenging to design sampling methods and construct estimates that accurately represent their frequency and magnitude of emissions. We present new methods to derive facility-specific emission distribution functions that explicitly integrate the influence of the relatively rare super-emitters. These methods were applied in the Barnett Shale region to construct a custom emission inventory that is then compared to top-down emission estimates for the region. We offer a methodological framework relevant to the design of future sampling campaigns, in which these high-emitters are seamlessly incorporated to representative emissions distributions. This framework can be applied to heterogeneous oil and gas production regions across geographies to obtain accurate regional emission estimates. Additionally, we characterize emissions relative to the fraction of a facility's total methane throughput; an effective metric to identify sites with excess emissions resulting from avoidable operating conditions, such as malfunctioning equipment (defined here as functional super-emitters). This work suggests that identifying functional super-emitters and correcting their avoidable operating conditions would result in significant emission reductions. However, due to their spatiotemporal dynamic behavior, achieving and maintaining uniformly low emissions across the entire population of sites will require mitigation steps (e.g. leak detection

  18. Achieving a balance between small singlet-triplet energy splitting and high fluorescence radiative rate in a quinoxaline-based orange-red thermally activated delayed fluorescence emitter.

    Science.gov (United States)

    Yu, Ling; Wu, Zhongbin; Xie, Guohua; Zhong, Cheng; Zhu, Zece; Cong, Hengjiang; Ma, Dongge; Yang, Chuluo

    2016-09-21

    A new orange-red thermally activated delayed fluorescence (TADF) emitter is designed and synthesized by incorporating a fluorine-substituted quinoxaline as an electron-acceptor and a phenoxazine as an electron-donor. The rational molecular design enables small singlet-triplet energy splitting (ΔEST) and high fluorescence radiative rate (k) for long-wavelength TADF emitters. The organic light emitting diodes (OLEDs) employing the new TADF emitter achieve maximum external quantum efficiencies (EQEs) of 13.9% and 9.0% for the vacuum- and solution-processed OLEDs, respectively.

  19. Ab-initio primitive cell parameters from single convergent-beam electron diffraction patterns: a converse route to the identification of microcrystals with electrons.

    Science.gov (United States)

    Le Page, Y

    1992-04-01

    A new method for the ab initio derivation of Buerger-reduced primitive cell parameters from coordinate measurements of spots on single convergent-beam electron diffraction (CBED) patterns is described, which does not involve trial-and-error. The pattern can be taken along any zone axis, and misorientations of the crystallite by as much as a few degrees are taken into account without loss of accuracy. This derivation of cell parameters by least-squares analysis of the measurements has been automated in a program called NRCBED. Present accuracy is about 1% on lengths and 2 degrees on angles, but could be significantly improved by modelling projector lens aberrations, or by using a microscope without a projector lens. With present technology, it is possible to obtain a CBED pattern and a semi-quantitative energy-dispersive X-ray (EDX) analysis simultaneously from a single microcrystal a few hundred Angströms across. It becomes therefore possible to identify the material of the crystal on a single CBED pattern: a cell parameter database for known compounds is searched with the primitive cell parameters obtained in the above way, and with a mask describing the EDX results qualitatively. Feasibility is demonstrated on a crystallite of CeO2 500 Angströms across. With this new approach, trial-and-error should disappear from the solution of other long-standing problems: interpretation of X-ray powder patterns for new compounds in the presence of impurity lines, or in the case of multiple phases should become straight-forward.

  20. Simulated Performance of the Wisconsin Superconducting Electron Gun

    Energy Technology Data Exchange (ETDEWEB)

    R.A. Bosch, K.J. Kleman, R.A. Legg

    2012-07-01

    The Wisconsin superconducting electron gun is modeled with multiparticle tracking simulations using the ASTRA and GPT codes. To specify the construction of the emittance-compensation solenoid, we studied the dependence of the output bunch's emittance upon the solenoid's strength and field errors. We also evaluated the dependence of the output bunch's emittance upon the bunch's initial emittance and the size of the laser spot on the photocathode. The results suggest that a 200-pC bunch with an emittance of about one mm-mrad can be produced for a free-electron laser.

  1. Confocal Raman and electronic microscopy studies on the topotactic conversion of calcium carbonate from Pomacea lineate shells into hydroxyapatite bioceramic materials in phosphate media.

    Science.gov (United States)

    dePaula, S M; Huila, M F G; Araki, K; Toma, H E

    2010-12-01

    Conversion of Pomacea lineate shells into hydroxyapatite (HA) bioceramic materials was investigated by their in vitro treatment with phosphate solutions, at room temperature. Confocal Raman microscopy revealed that the conversion proceeds at distinct rates through the nacreous or periostracum sides of the shell. The conversion can be accelerated using powdered samples, yielding biocompatible materials of great interest in biomedicine.

  2. Electrically pumped single-defect light emitters in WSe2

    Science.gov (United States)

    Schwarz, S.; Kozikov, A.; Withers, F.; Maguire, J. K.; Foster, A. P.; Dufferwiel, S.; Hague, L.; Makhonin, M. N.; Wilson, L. R.; Geim, A. K.; Novoselov, K. S.; Tartakovskii, A. I.

    2016-06-01

    Recent developments in fabrication of van der Waals heterostructures enable new type of devices assembled by stacking atomically thin layers of two-dimensional materials. Using this approach, we fabricate light-emitting devices based on a monolayer WSe2, and also comprising boron nitride tunnelling barriers and graphene electrodes, and observe sharp luminescence spectra from individual defects in WSe2 under both optical and electrical excitation. This paves the way towards the realisation of electrically-pumped quantum emitters in atomically thin semiconductors. In addition we demonstrate tuning by more than 1 meV of the emission energy of the defect luminescence by applying a vertical electric field. This provides an estimate of the permanent electric dipole created by the corresponding electron-hole pair. The light-emitting devices investigated in our work can be assembled on a variety of substrates enabling a route to integration of electrically pumped single quantum emitters with existing technologies in nano-photonics and optoelectronics.

  3. Longitudinal emittance reduction in LEIR of ion beams for LHC

    CERN Document Server

    Angoletta, M E; Findlay, A; Hancock, S; Manglunki, D

    2014-01-01

    For the 2013 LHC ion run the anticipated request for batches from the PS Complex comprising four ion bunches spaced by 100 ns was changed to batches of two bunches spaced by 200 ns. This modified demand was met by suppressing a splitting step in the PS machine, but with the consequence of halving the longitudinal emittance required from LEIR. Thus NOMINAL Pb54+ beams from LEIR had to be delivered inside ~9 eVs to provide sufficient blow-up margin in the PS. Machine Development (MD) sessions were carried out in LEIR to investigate methods to satisfy these stricter requirements. Two main ingredients were found to reduce longitudinal emittance. The first and most important was to adjust carefully the frequency offset at capture in order to align the RF with the position where the beam is deposited by the electron cooling system prior to acceleration. The second ingredient was to reduce the final bucket area in order to reduce any residual filamentation during capture. This note documents the results obtaine...

  4. Discrete space charge affected field emission: Flat and hemisphere emitters

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, Kevin L., E-mail: kevin.jensen@nrl.navy.mil [Code 6854, Naval Research Laboratory, Washington, DC 20375 (United States); Shiffler, Donald A.; Tang, Wilkin [Air Force Research Laboratory, Kirtland AFB, New Mexico 87117 (United States); Rittersdorf, Ian M. [Code 6770, Naval Research Laboratory, Washington, DC 20375 (United States); Lebowitz, Joel L. [Department of Mathematics and Department of Physics, Rutgers University, Piscataway, New Jersey 08854-8019 (United States); Harris, John R. [U.S. Navy Reserve, New Orleans, Louisiana 70143 (United States); Lau, Y. Y. [Department of Nuclear Engineering and Radiological Sciences, University of Michigan, Ann Arbor, Michigan 48109 (United States); Petillo, John J. [Leidos, Billerica, Massachusetts 01821 (United States); Luginsland, John W. [Physics and Electronics Directorate, AFOSR, Arlington, Virginia 22203 (United States)

    2015-05-21

    Models of space-charge affected thermal-field emission from protrusions, able to incorporate the effects of both surface roughness and elongated field emitter structures in beam optics codes, are desirable but difficult. The models proposed here treat the meso-scale diode region separate from the micro-scale regions characteristic of the emission sites. The consequences of discrete emission events are given for both one-dimensional (sheets of charge) and three dimensional (rings of charge) models: in the former, results converge to steady state conditions found by theory (e.g., Rokhlenko et al. [J. Appl. Phys. 107, 014904 (2010)]) but show oscillatory structure as they do. Surface roughness or geometric features are handled using a ring of charge model, from which the image charges are found and used to modify the apex field and emitted current. The roughness model is shown to have additional constraints related to the discrete nature of electron charge. The ability of a unit cell model to treat field emitter structures and incorporate surface roughness effects inside a beam optics code is assessed.

  5. Ultrafast spectroscopy studies on the mechanism of electron transfer and energy conversion in the isolated pseudo ginseng, water hyacinth and spinach chloroplasts

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The spectroscopy characteristics and the fluorescence lifetime for the chloroplasts isolated from the pseudo ginseng, water hyacinth and spinach plant leaves have been studied by absorption spectra, low temperature steady-state fluorescence spectroscopy and single photon counting measurement under the same conditions and by the same methods. The similarity of the absorption spectra for the chloroplasts at room temperature suggests that different plants can efficiently absorb light of the same wavelength. The fluorescence decays in PS II measured at the natural QA state for the chloroplasts have been fitted by a three-exponential kinetic model. The three fluorescence lifetimes are 30, 274 and 805 ps for the pseudo ginseng chloroplast; 138, 521 and 1494 ps for the water hyacinth chloroplast; 197, 465 and 1459 ps for the spinach chloroplast, respectively. The slow lifetime fluorescence component is assigned to a collection of associated light harvesting Chl a/b proteins, the fast lifetime component to the reaction center of PS II and the middle lifetime component to the delay fluorescence of recombination of and Pheo-. The excitation energy conversion efficiency (η) in PS II RC is defined and calculated on the basis of the 20 ps electron transfer time constant model, 60%, 87% and 91% for the pseudo ginseng, water hyacinth and spinach chloroplasts, respectively. This interesting result is in unconformity with what is assumed to be 100% efficiency in PS II RC. Our result in this work stands in line with the 20 ps electron transfer time constant in PS II rather sound and the water hyacinth plant grows slower than the spinach plant does as envisaged on the efficiency. But, our results predict that those plants can perform highly efficient transfer of photo-excitation energy from the light-harvesting pigment system to the reaction center (closely to 100%). The conclusion contained in this paper reveals the plant growth characteristics expressed in the primary processes of

  6. Effect of Short-Circuit Faults in the Back-to-Back Power Electronic Converter and Rotor Terminals on the Operational Behavior of the Doubly-Fed Induction Generator Wind Energy Conversion System

    Directory of Open Access Journals (Sweden)

    Dimitrios G. Giaourakis

    2015-02-01

    Full Text Available This paper deals with the operational behavior of the Doubly-Fed Induction Generator Wind Energy Conversion System under power electronic converter and rotor terminals faulty conditions. More specifically, the effect of the short-circuit fault both in one IGBT of the back-to-back power electronic converter and in rotor phases on the overall system behavior has been investigated via simulation using a system of 2 MW. Finally, the consequences of these faults have been evaluated.

  7. Lateral current effects on the voltage distribution in the emitter of solar cells under concentrated sunlight

    Energy Technology Data Exchange (ETDEWEB)

    Morales-Acevedo, Arturo [CINVESTAV-IPN, Electrical Engineering Department, Avenida IPN No. 2508, 07360 Mexico, DF (Mexico)

    2009-04-15

    The design of the grid contact in silicon solar cells is one of the most important steps for the optimization and fabrication of these energy conversion devices. The voltage drop due to the lateral flow of current towards the grid fingers can be a limiting factor causing the reduction of conversion efficiency. For low current levels this voltage drop can be made small, for typical values of sheet resistance in the emitter, but for solar cells made to operate at high sun concentrations this efficiency loss can be important, unless there is a clear vision of the current and voltage distribution so that the emitter and grid design can be improved. Hence, it is important to establish and solve the current and voltage distribution equations for solar cells with a grid contact. In this work, first these equations are established and then they are solved in order to show the effects that the lateral current flow in the emitter cause on the voltage distribution, particularly at high illumination levels. In addition, it will be shown that the open circuit voltage is significantly reduced due to the lateral current flow as compared to the value predicted from a simple equivalent circuit with a lumped resistance model. (author)

  8. MIRAGE emitter improvements & technology review

    Science.gov (United States)

    Solomon, Steven L.; Irwin, Alan; Oleson, Jim; Sparkman, Kevin; Gallagher, Anthony M.; Lin, William; Pan, Jianmei

    2001-08-01

    With the increased demand for IR sensor and surveillance systems, there is a growing need for technologies to support their operational readiness. Measurement of sensor characteristics such as sensitivity, MRTD, and dynamic range should be standard in all mission critical systems. The Real-Time Infrared Test Set (RTIR) is a portable system designed to provide in-the-field calibration and testing of IR imaging systems and seekers. RTIR uses the high volume manufacturing processes of the Very Large Scale Integration (VLSI) and the Micro Electromechanical Systems (MEMS) technology to produce a Thermal Pixel Array (TPA). State-of-the-art CMOS processes define all the necessary on-chip digital and analog electronics. When properly driven, this array generates variable temperature,synthetic IR scenes. A nonuniformity measurement of several TPAs is presented.

  9. Obtaining the conversion curve of CT numbers to electron density from the effective energy of the CT using the dummy SEFM; Obtencion de la curva de conversion de numeros TC a densidad electronica a partir de la energia efectiva del TC usando el maniqui de la SEFM

    Energy Technology Data Exchange (ETDEWEB)

    Martin-Viera Cueto, J. A.; Garcia Pareja, S.; Benitez Villegas, E. M.; Moreno Saiz, E. M.; Bodineau Gil, C.; Caudepon Moreno, F.

    2011-07-01

    The objective of this work is to obtain the conversion curve of Hounsfield units (A) versus electron densities using a mannequin with different tissue equivalent materials. This provides for the effective energy beam CT and is used to characterize the linear coefficients of absorption of different materials that comprise the dummy.

  10. Study of Thermal-Field Emission Properties and Investigation of Temperature dependent Noise in the Emission Current form vertical Carbon nanotube emitters

    KAUST Repository

    Kolekar, Sadhu

    2017-05-05

    We have investigated temperature dependent field electron emission characteristics of vertical carbon nanotubes (CNTs). The generalized expression for electron emission from well defined cathode surface is given by Millikan and Lauritsen [1] for the combination of temperature and electric field effect. The same expression has been used to explain the electron emission characteristics from vertical CNT emitters. Furthermore, this has been applied to explain the electron emission for different temperatures ranging from room temperature to 1500 K. The real-time field electron emission images at room temperature and 1500 K are recorded by using Charge Coupled Device (CCD), in order to understand the effect of temperature on electron emission spots in image morphology (as indicated by ring like structures) and electron emission spot intensity of the emitters. Moreover, the field electron emission images can be used to calculate the total number of emitters per cm2 for electron emission. The calculated number of emitters per cm2 is 4.5x107 and, the actual number emitters per cm2 present for electron emission calculated from Atomic Force Microscopy (AFM) data is 1.2x1012. The measured Current-Voltage (I-V) characteristics obey the Folwer-Nordheim (F-N) type behavior. The fluctuations in the emission current are recorded at different temperatures and, temperature dependence of power spectral density obeys power law relation s(f)=I2/f2 with that of emission current and frequency.

  11. Conversational Narcissism.

    Science.gov (United States)

    Vangelisti, Anita L.; And Others

    1990-01-01

    Examines narcissistic communication and the ways it is exhibited in everyday conversation. Identifies the following behavioral referents: boasting, refocusing the topic of conversation on the self, exaggerating hand and body movements, using a loud tone of voice, and "glazing over" when others speak. Suggests that conversational…

  12. Contentious Conversations

    Science.gov (United States)

    Zuidema, Leah A.

    2011-01-01

    The idea of joining a conversation through reading and writing is not new; in his 1941 book "The Philosophy of Literary Form: Studies in Symbolic Action," Kenneth Burke suggests that the acts of reading and writing are like entering a parlor where others are already conversing. The author explores the place of professional debate within NCTE and…

  13. Nanocomposite plasmonic fluorescence emitters with core/shell configurations

    Energy Technology Data Exchange (ETDEWEB)

    Miao, Xiaoyu; Brener, Igal; Luk, Ting Shan

    2010-07-16

    This paper is focused on the optical properties of nanocomposite plasmonic emitters with core/shell configurations, where a fluorescence emitter is located inside a metal nanoshell. Systematic theoretical investigations are presented for the influence of material type, core radius, shell thickness, and excitation wavelength on the internal optical intensity, radiative quantum yield, and fluorescence enhancement of the nanocomposite emitter. It is our conclusion that: (i) an optimal ratio between the core radius and shell thickness is required to maximize the absorption rate of fluorescence emitters, and (ii) a large core radius is desired to minimize the non-radiative damping and avoid significant quantum yield degradation of light emitters. Several experimental approaches to synthesize these nanocomposite emitters are also discussed. Furthermore, our theoretical results are successfully used to explain several reported experimental observations and should prove useful for designing ultra-bright core/shell nanocomposite emitters.

  14. Nanocomposite plasmonic fluorescence emitters with core/shell configurations.

    Energy Technology Data Exchange (ETDEWEB)

    Brener, Igal; Luk, Ting Shan; Miao, Xiaoyu

    2010-06-01

    This paper is focused on the optical properties of nanocomposite plasmonic emitters with core/shell configurations, where a fluorescence emitter is located inside a metal nanoshell. Systematic theoretical investigations are presented for the influence of material type, core radius, shell thickness, and excitation wavelength on the internal optical intensity, radiative quantum yield, and fluorescence enhancement of the nanocomposite emitter. It is our conclusion that: (i) an optimal ratio between the core radius and shell thickness is required to maximize the absorption rate of fluorescence emitters, and (ii) a large core radius is desired to minimize the non-radiative damping and avoid significant quantum yield degradation of light emitters. Several experimental approaches to synthesize these nanocomposite emitters are also discussed. Furthermore, our theoretical results are successfully used to explain several reported experimental observations and should prove useful for designing ultra-bright core/shell nanocomposite emitters.

  15. Selective detection of Fe and Mn species at mineral surfaces in weathered granite by conversion electron yield X-ray absorption fine structure

    Energy Technology Data Exchange (ETDEWEB)

    Itai, Takaaki [Department of Earth and Planetary Systems Science, Hiroshima University, Kagamiyama, Higashi-Hiroshima, Hiroshima 739-8526 (Japan)], E-mail: itai-epss@hiroshima-u.ac.jp; Takahashi, Yoshio [Department of Earth and Planetary Systems Science, Hiroshima University, Kagamiyama, Higashi-Hiroshima, Hiroshima 739-8526 (Japan); Uruga, Tomoya; Tanida, Hajime [Japan Synchrotron Radiation Research Institute, 1-1-1 Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5198 (Japan); Iida, Atsuo [Photon Factory, National Laboratory for High Energy Physics, O-ho, Tsukuba, Ibaraki 305 (Japan)

    2008-09-15

    A new method for the speciation of Fe and Mn at mineral surfaces is proposed using X-ray absorption fine structure in conversion electron yield mode (CEY-XAFS). This method generally reflects information on the species at the sub-{mu}m scale from the particle surface due to the limited escape depth of the inelastic Auger electron. The surface sensitivity of this method was assessed by experiments on two samples of granite showing different degrees of weathering. The XANES spectra of the Fe-K and Mn-K edge clearly gave different information for CEY and fluorescence (FL) modes. These XANES spectra of Fe and Mn show a good fit upon application of least-squares fitting using ferrihydrite/MnO{sub 2} and biotite as the end members. The XANES spectra collected by CEY mode provided more selective information on the secondary phases which are probably present at the mineral surfaces. In particular, CEY-XANES spectra of Mn indicated the presence of Mn oxide in unweathered granite despite a very small contribution of Mn oxide being indicated by FL-XANES and selective chemical-extraction analyses. Manganese oxide could not be detected by micro-beam XANES (beam size: 5 x 5 {mu}m{sup 2}) in unweathered granite, suggesting that Mn oxide thinly and ubiquitously coats mineral surface at a sub-{mu}m scale. This information is important, since Mn oxide can be the host for various trace elements. CEY-XAFS can prove to be a powerful tool as a highly sensitive surface speciation method. Combination of CEY and FL-XAFS will help identify minor phases that form at mineral surfaces, but identification of Fe and Mn oxides at mineral surfaces is critical to understand the migration of trace elements in water-rock interaction.

  16. Iron silicide formation at different layers of (Fe/Si){sub 3} multilayered structures determined by conversion electron Mössbauer spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Badía-Romano, L., E-mail: lbadia@unizar.es; Bartolomé, J. [Departamento de Física de la Materia Condensada, Instituto de Ciencia de Materiales de Aragón, CSIC-Universidad de Zaragoza, E-50009 Zaragoza (Spain); Rubín, J. [Departamento de Ciencia y Tecnología de Materiales y Fluidos, Instituto de Ciencia de Materiales de Aragón, CSIC-Universidad de Zaragoza, E-50018 Zaragoza (Spain); Magén, C. [Laboratorio de Microscopías Avanzadas (LMA), Instituto de Nanociencia de Aragón (INA), Universidad de Zaragoza, E-50018 Zaragoza (Spain); Bürgler, D. E. [Peter Grünberg Institut (PGI-6), Forschungszentrum Jülich GmbH, D-52425 Jülich (Germany)

    2014-07-14

    The morphology and the quantitative composition of the Fe-Si interface layer forming at each Fe layer of a (Fe/Si){sub 3} multilayer have been determined by means of conversion electron Mössbauer spectroscopy (CEMS) and high-resolution transmission electron microscopy (HRTEM). For the CEMS measurements, each layer was selected by depositing the Mössbauer active {sup 57}Fe isotope with 95% enrichment. Samples with Fe layers of nominal thickness d{sub Fe} = 2.6 nm and Si spacers of d{sub Si} = 1.5 nm were prepared by thermal evaporation onto a GaAs(001) substrate with an intermediate Ag(001) buffer layer. HRTEM images showed that Si layers grow amorphous and the epitaxial growth of the Fe is good only for the first deposited layer. The CEMS spectra show that at all Fe/Si and Si/Fe interfaces a paramagnetic c-Fe{sub 1−x}Si phase is formed, which contains 16% of the nominal Fe deposited in the Fe layer. The bottom Fe layer, which is in contact with the Ag buffer, also contains α-Fe and an Fe{sub 1−x}Si{sub x} alloy that cannot be attributed to a single phase. In contrast, the other two layers only comprise an Fe{sub 1−x}Si{sub x} alloy with a Si concentration of ≃0.15, but no α-Fe.

  17. Structure and 57Fe conversion electron M(o)ssbauer spectroscopy study of Mn-Zn ferrite nanocrystal thin films by electroless plating in aqueous solution

    Institute of Scientific and Technical Information of China (English)

    SUN JianRong; WANG XueWen; LIU JinHong; WANG JianBo; LI FaShen

    2008-01-01

    Mn1-xZnxFe2O4 thin films with various Zn contents and of different thickness were synthesized on glass substrates directly by electroless plating in aqueous solution at 90℃ without heat treatment. The Mn-Zn ferrite films have a single spinel phase structure and well-crystallized columnar grains growing per-pendicularly to the substrates. The results of conversion electron 57Fe Mossbauer spectroscopy (CEMS) indicate that the cation distribution of Mn-xZnxFe2O4 ferrite nanocrystal thin films fabricated by elec-troless plating is different from the bulk materials' and a great quantity of Fe3+ ions are still present on A sites for x>0.5. When the Zn content of the films increases, Fe3+ ions in the films transfer from A sites to B sites and the hyperfine magnetic field reduces, suggesting that Zn2+ has strong chemical affinity towards the A sites. On the other side, with the increase of the thickness of the films, Fe3+ ions, at B sites in the spinel structure, increase and the array of magnetic moments no longer lies in the thin film plane completely. At x=0.5, Hc and Ms of Mn1-xZnxFe2O4 thin films show a minimum of 3.7 kA/m and a maximum of 419.6 kA/m, respectively.

  18. Development of a sampling method for carbonyl compounds released due to the use of electronic cigarettes and quantitation of their conversion from liquid to aerosol.

    Science.gov (United States)

    Jo, Sang-Hee; Kim, Ki-Hyun

    2016-01-15

    In this study, an experimental method for the collection and analysis of carbonyl compounds (CCs) released due to the use of electronic cigarettes (e-cigarettes or ECs) was developed and validated through a series of laboratory experiments. As part of this work, the conversion of CCs from a refill solution (e-solution) to aerosol also was investigated based on mass change tracking (MCT) approach. Aerosol samples generated from an e-cigarette were collected manually using 2,4-dinitrophenylhydrazine (DNPH) cartridges at a constant sampling (puffing) velocity of 1 L min(-1) with the following puff conditions: puff duration (2s), interpuff interval (10s), and puff number (5, 10, and 15 times). The MCT approach allowed us to improve the sampling of CCs through critical evaluation of the puff conditions in relation to the consumed quantities of refill solution. The emission concentrations of CCs remained constant when e-cigarettes were sampled at or above 10 puff. Upon aerosolization, the concentrations of formaldehyde and acetaldehyde increased 6.23- and 58.4-fold, respectively, relative to their concentrations in e-solution. Furthermore, a number of CCs were found to be present in the aerosol samples which were not detected in the initial e-solution (e.g., acetone, butyraldehyde, and o-tolualdehyde).

  19. Dopant profile control of epitaxial emitter for silicon solar cells by low temperature epitaxy

    Science.gov (United States)

    Lai, Donny; Tan, Yew Heng; Gunawan, Oki; He, Lining; Seng Tan, Chuan

    2011-07-01

    We report an alternative approach to grow phosphorus-doped epitaxial silicon emitter by rapid thermal chemical vapor deposition at low temperature (T ≥ 700 °C). A power conversion efficiency (PCE) of (6.6 ± 0.3)% and a pseudo PCE of (10.2 ± 0.2)% has been achieved for the solar cell with epi-emitter grown at 700 °C, in the absence of surface texturization, antireflective coating, and back surface field enhancement, without considering front contact shading. Secondary ion mass spectroscopy revealed that lower temperature silicon epitaxy yields a more abrupt p-n junction, suggesting potential applications for radial p-n junction wire array solar cells.

  20. Ghost signals in Allison emittance scanners

    Energy Technology Data Exchange (ETDEWEB)

    Stockli, Martin P.; /SNS Project, Oak Ridge /Tennessee U.; Leitner, M.; /LBL, Berkeley; Moehs, D.P.; /Fermilab; Keller, R.; /LBL, Berkeley; Welton, R.F.; /SNS Project, Oak

    2004-12-01

    For over 20 years, Allison scanners have been used to measure emittances of low-energy ion beams. We show that scanning large trajectory angles produces ghost signals caused by the sampled beamlet impacting on an electric deflection plate. The ghost signal strength is proportional to the amount of beam entering the scanner. Depending on the ions, and their velocity, the ghost signals can have the opposite or the same polarity as the main beam signals. The ghost signals cause significant errors in the emittance estimates because they appear at large trajectory angles. These ghost signals often go undetected because they partly overlap with the real signals, are mostly below the 1% level, and often hide in the noise. A simple deflection plate modification is shown to reduce the ghost signal strength by over 99%.

  1. Computing Eigen-Emittances from Tracking Data

    CERN Document Server

    Alexahin, Y

    2014-01-01

    In a strongly nonlinear system the particle distribution in the phase space may develop long tails which contribution to the covariance (sigma) matrix should be suppressed for a correct estimate of the beam emittance. A method is offered based on Gaussian approximation of the original particle distribution in the phase space (Klimontovich distribution) which leads to an equation for the sigma matrix which provides efficient suppression of the tails and cannot be obtained by introducing weights. This equation is easily solved by iterations in the multi-dimensional case. It is also shown how the eigen-emittances and coupled optics functions can be retrieved from the sigma matrix in a strongly coupled system. Finally, the developed algorithm is applied to 6D ionization cooling of muons in HFOFO channel.

  2. Computing Eigen-Emittances from Tracking Data

    Energy Technology Data Exchange (ETDEWEB)

    Alexahin, Y. [Fermilab

    2014-09-18

    In a strongly nonlinear system the particle distribution in the phase space may develop long tails which contribution to the covariance (sigma) matrix should be suppressed for a correct estimate of the beam emittance. A method is offered based on Gaussian approximation of the original particle distribution in the phase space (Klimontovich distribution) which leads to an equation for the sigma matrix which provides efficient suppression of the tails and cannot be obtained by introducing weights. This equation is easily solved by iterations in the multi-dimensional case. It is also shown how the eigen-emittances and coupled optics functions can be retrieved from the sigma matrix in a strongly coupled system. Finally, the developed algorithm is applied to 6D ionization cooling of muons in HFOFO channel.

  3. Reverse Emittance Exchange for Muon Colliders

    Energy Technology Data Exchange (ETDEWEB)

    V. Ivanov, A. Afanasev, C.M. Ankenbrandt, R.P. Johnson, G.M. Wang, S.A. Bogacz, Y.S. Derbenev

    2009-05-01

    Muon collider luminosity depends on the number of muons in the storage ring and on the transverse size of the beams in collision. Ionization cooling as it is currently envisioned will not cool the beam sizes sufficiently well to provide adequate luminosity without large muon intensities. Six-dimensional cooling schemes will reduce the longitudinal emittance of a muon beam so that smaller high frequency RF cavities can be used for later stages of cooling and for acceleration. However, the bunch length at collision energy is then shorter than needed to match the interaction region beta function. New ideas to shrink transverse beam dimensions by lengthening each bunch will help achieve high luminosity in muon colliders. Analytic expressions for the reverse emittance exchange mechanism were derived, including a new resonant method of beam focusing.

  4. FIrpic: archetypal blue phosphorescent emitter for electroluminescence.

    Science.gov (United States)

    Baranoff, Etienne; Curchod, Basile F E

    2015-05-14

    FIrpic is the most investigated bis-cyclometallated iridium complex in particular in the context of organic light emitting diodes (OLEDs) because of its attractive sky-blue emission, high emission efficiency, and suitable energy levels. In this Perspective we review the synthesis, structural characterisations, and key properties of this emitter. We also survey the theoretical studies and summarise a series of selected monochromatic electroluminescent devices using FIrpic as the emitting dopant. Finally we highlight important shortcomings of FIrpic as an emitter for OLEDs. Despite the large body of work dedicated to this material, it is manifest that the understanding of photophysical and electrochemical processes are only broadly understood mainly because of the different environment in which these properties are measured, i.e., isolated molecules in solvent vs. device.

  5. Energy Calibration of a Silicon Detector Using Pure Beta-Emitters; Calibracion Energetica de un Detector de Silicio Mediante Emisores Beta Puros

    Energy Technology Data Exchange (ETDEWEB)

    Borras, C.; Arcos, J. M. los

    1992-07-01

    Energy calibration of SI detectors used in electron spectroscopy 13 commonly performed with conversion electron sources or monoenergetic electrons beams, which are preferred against beta emitters due to the problems arising from their continuous spectra. This paper presents a simple calibration procedure for a PIP-type silicon detector, using 14C, 147Pm, 99{sup T}c and 45Ca sources, that is based on the correspondence between the average channel observed in the experimental spectrum and the mean energy evaluated from the theoretical Fermi distribution for each nuclide. First, a method for evaluating the average channel in the experimental spectrum distorted by the electronic noise is described and its uncertainty estimated. Then, the channel-energy relation ship is established by least squares fitting modified to account for uncertainties in both variables.The calibration has been successfully verified with 147Pm and '09cd sources, showing discrepaneles not greater than 2.5%, within the uncertainties due to the detector resolution and the sources features. (Author)

  6. Energy Calibration of a Silicon Detector Using Pure Beta-Emitters; Calibracion Energetica de un Detector de Silicio Mediante Emisores Beta Puros

    Energy Technology Data Exchange (ETDEWEB)

    Borras, C.; Arcos, J. M. los

    1992-07-01

    Energy calibration of SI detectors used in electron spectroscopy 13 commonly performed with conversion electron sources or monoenergetic electrons beams, which are preferred against beta emitters due to the problems arising from their continuous spectra. This paper presents a simple calibration procedure for a PIP-type silicon detector, using 14C, 147Pm, 99{sup T}c and 45Ca sources, that is based on the correspondence between the average channel observed in the experimental spectrum and the mean energy evaluated from the theoretical Fermi distribution for each nuclide. First, a method for evaluating the average channel in the experimental spectrum distorted by the electronic noise is described and its uncertainty estimated. Then, the channel-energy relation ship is established by least squares fitting modified to account for uncertainties in both variables.The calibration has been successfully verified with 147Pm and '09cd sources, showing discrepaneles not greater than 2.5%, within the uncertainties due to the detector resolution and the sources features. (Author)

  7. Measurement of X-ray beam emittance using crystal optics at an X-ray undulator beamline

    CERN Document Server

    Kohmura, Y; Awaji, M; Tanaka, T; Hara, T; Goto, S; Ishikawa, T

    2000-01-01

    We present a method of using crystal optics to measure the emittance of the X-ray source. Two perfect crystals set in (++) configuration work as a high-resolution collimator. The phase-space diagram (i.e. beam cross-section and angular distribution) could be determined without any assumptions on the light source. When the measurement is done at short wavelength radiation from undulator, the electron beam emittance is larger than the diffraction limit of the X-rays. Therefore, the electron beam emittance could be estimated. The measurement was done with the hard X-rays of 18.5 and 55 keV from an undulator beamline, BL 47XU, of SPring-8. The horizontal emittance of the X-ray beam was estimated to be about 7.6 nmrad, close to the designed electron beam emittance of the storage ring (7 nmrad). Some portions of the instrumental functions, such as the scattering by filters and windows along the beamline and the slight bent of the crystal planes of the monochromator, could not be precisely evaluated, but an upper li...

  8. Power electronics advanced conversion technologies

    CERN Document Server

    Luo, Fang Lin

    2010-01-01

    Introduction Symbols and Factors Used in This Book AC/DC Rectifiers DC/DC Converters DC/AC Inverters AC/AC Converters AC/DC/AC and DC/AC/DC Converters Uncontrolled AC/DC Converters Single-Phase Half-Wave Converters Single-Phase Full-Wave Converters Three-Phase Half-Wave Converters Six-Phase Half-Wave Converters Three-Phase Full-Wave Converters Multiphase Full-Wave Converters Controlled AC/DC Converters Single-Phase Half-Wave Controlled Converters Single-Phase Full-Wave Controlled Converters Three-Phase Half-Wave Controlled Rectifiers Six-Phase Half-Wave Controlled Rectifiers Three-Phase Full-W

  9. Emittance growths in resonance crossing at FFAGs

    Energy Technology Data Exchange (ETDEWEB)

    Ng, K.Y.; /Fermilab; Pang, X.; Wang, F.; Wang, X.; Lee, S.Y.; /Indiana U.

    2007-10-01

    Scaling laws of the emittance growth for a beam crossing the 6th-order systematic space-charge resonances and the random-octupole driven 4th-order resonance are obtained by numerical multi-particle simulations. These laws can be important in setting the minimum acceleration rate and maximum tolerable resonance strength for the design of non-scaling fixed-field alternating gradient accelerators.

  10. Dose-rate conversion factors for external exposure to photon and electron radiation from radionuclides occurring in routine releases from nuclear fuel cycle facilities. [Conversion factors are given for dose rates to 21 organs from 240 different radionuclides for 3 different modes of exposure

    Energy Technology Data Exchange (ETDEWEB)

    Kocher, D.C.

    1979-02-01

    Dose-rate conversion factors for external exposure to photon and electron radiation have been calculated for 240 radionuclides of potential importance in routine releases from nuclear fuel cycle facilities. Dose-rate conversion factors for immersion in contaminated air, immersion in contaminated water, and exposure to a contaminated ground surface are estimated for tissue-equivalent material at the body surface of an exposed individual. For each exposure mode, photon dose-rate conversion factors are also estimated for 22 body organs. The calculations assume that the contaminated air, water, and ground surface are infinite in extent and that the radionuclide concentration is uniform. Dose-rate conversion factors for immersion in contaminated air and water are based on the requirement that all energy emitted in the decay of a radionuclide is absorbed in the infinite medium. Dose-rate conversion factors for ground-surface exposure are calculated for a height of 1 m using the point-kernel integration method and known specific absorbed fractions for photons and electrons in air. The computer code DOSFACTER written to perform the calculations is described and documented.

  11. Studying Reionization with Ly-alpha Emitters

    CERN Document Server

    McQuinn, Matthew; Zaldarriaga, Matias; Dutta, Suvendra

    2007-01-01

    We show that observations of high-redshift Ly-alpha emitters (LAEs) have the potential to provide definitive evidence for reionization in the near future. Using 200 Mpc radiative transfer simulations, we calculate the effect that patchy reionization has on the line profile, on the luminosity function, and, most interestingly, on the clustering of emitters for several realistic models of reionization. Reionization increases the measured clustering of emitters, and we show that this enhancement would be essentially impossible to attribute to anything other than reionization. Our results motivate looking for the signature of reionization in existing LAE data. We find that for stellar reionization scenarios the angular correlation function of the 58 LAEs in the Subaru Deep Field z = 6.6 photometric sample is more consistent with a fully ionized universe (mean volume ionized fraction x_i = 1) than a universe with x_i 2-sigma confidence level. Measurements in the next year on Subaru will increase their z = 6.6 LAE ...

  12. Single-Crystalline Silicon Solar Cell with Selective Emitter Formed by Screen Printing and Chemical Etching Method: A Feasibility Study

    Directory of Open Access Journals (Sweden)

    Yen-Po Chen

    2013-01-01

    Full Text Available A new method for fabricating crystalline silicon solar cells with selective emitters is presented. In this method, shallow trenches corresponding to metal contact area are first formed by screen printing and chemical etching, followed by heavy doping over the whole front surface of the silicon wafer. After a polymer mask is pasted by aligned screen-printing to cover the shallow trenches, the silicon wafer is etched such that the heavy doping remains at the shallow trench area, while other areas become lightly doped. With the presented method, two screening printing steps are required for obtaining a selective emitter structure on a solar wafer. Compared with existing etch-back methods, the presented one is believed to be able to easily conform with present industrial process. Experimental results show that optical responses at the short and long wavelengths were both improved by applying the proposed selective emitter technique to fabricate solar cells with an a-Si:H film deposited on the back surface. The selective emitter cell with a-Si:H back surface deposition had improvements of 1.66 mA/cm2 and 1.23% absolute in Jsc and conversion efficiency, respectively, compared to the reference cell that had a homogeneous emitter and no a-Si:H on the back surface.

  13. Conversion Disorder

    Science.gov (United States)

    ... Recent significant stress or emotional trauma Being female — women are much more likely to develop conversion disorder Having a mental health condition, such as mood or anxiety disorders, dissociative disorder or certain personality disorders Having ...

  14. Conversation Analysis.

    Science.gov (United States)

    Schiffrin, Deborah

    1990-01-01

    Summarizes the current state of research in conversation analysis, referring primarily to six different perspectives that have developed from the philosophy, sociology, anthropology, and linguistics disciplines. These include pragmatics; speech act theory; interactional sociolinguistics; ethnomethodology; ethnography of communication; and…

  15. Conversation Analysis.

    Science.gov (United States)

    Schiffrin, Deborah

    1990-01-01

    Summarizes the current state of research in conversation analysis, referring primarily to six different perspectives that have developed from the philosophy, sociology, anthropology, and linguistics disciplines. These include pragmatics; speech act theory; interactional sociolinguistics; ethnomethodology; ethnography of communication; and…

  16. Experimental Demonstration of a Hybrid-Quantum-Emitter Producing Individual Entangled Photon Pairs in the Telecom Band

    Science.gov (United States)

    Chen, Geng; Zou, Yang; Zhang, Wen-Hao; Zhang, Zi-Huai; Zhou, Zong-Quan; He, De-Yong; Tang, Jian-Shun; Liu, Bi-Heng; Yu, Ying; Zha, Guo-Wei; Ni, Hai-Qiao; Niu, Zhi-Chuan; Han, Yong-Jian; Li, Chuan-Feng; Guo, Guang-Can

    2016-05-01

    Quantum emitters generating individual entangled photon pairs (IEPP) have significant fundamental advantages over schemes that suffer from multiple photon emission, or schemes that require post-selection techniques or the use of photon-number discriminating detectors. Quantum dots embedded within nanowires (QD-NWs) represent one of the most promising candidate for quantum emitters that provide a high collection efficiency of photons. However, a quantum emitter that generates IEPP in the telecom band is still an issue demanding a prompt solution. Here, we demonstrate in principle that IEPPs in the telecom band can be created by combining a single QD-NW and a nonlinear crystal waveguide. The QD-NW system serves as the single photon source, and the emitted visible single photons are split into IEPPs at approximately 1.55 μm through the process of spontaneous parametric down conversion (SPDC) in a periodically poled lithium niobate (PPLN) waveguide. The compatibility of the QD-PPLN interface is the determinant factor in constructing this novel hybrid-quantum-emitter (HQE). Benefiting from the desirable optical properties of QD-NWs and the extremely high nonlinear conversion efficiency of PPLN waveguides, we successfully generate IEPPs in the telecom band with the polarization degree of freedom. The entanglement of the generated photon pairs is confirmed by the entanglement witness. Our experiment paves the way to producing HQEs inheriting the advantages of multiple systems.

  17. Strategic conversation

    Directory of Open Access Journals (Sweden)

    Nicholas Asher

    2013-08-01

    Full Text Available Models of conversation that rely on a strong notion of cooperation don’t apply to strategic conversation — that is, to conversation where the agents’ motives don’t align, such as courtroom cross examination and political debate. We provide a game-theoretic framework that provides an analysis of both cooperative and strategic conversation. Our analysis features a new notion of safety that applies to implicatures: an implicature is safe when it can be reliably treated as a matter of public record. We explore the safety of implicatures within cooperative and non cooperative settings. We then provide a symbolic model enabling us (i to prove a correspondence result between a characterisation of conversation in terms of an alignment of players’ preferences and one where Gricean principles of cooperative conversation like Sincerity hold, and (ii to show when an implicature is safe and when it is not. http://dx.doi.org/10.3765/sp.6.2 BibTeX info

  18. Stable Field Emitters for a Miniature X-ray Tube Using Carbon Nanotube Drop Drying on a Flat Metal Tip

    Directory of Open Access Journals (Sweden)

    Heo SungHwan

    2010-01-01

    Full Text Available Abstract Stable carbon nanotube (CNT field emitters for a vacuum-sealed miniature X-ray tube have been fabricated. The field emitters with a uniform CNT coating are prepared by a simple drop drying of a CNT mixture solution that is composed of chemically modified multi-walled CNTs, silver nanoparticles, and isopropyl alcohol on flat tungsten tips. A highly thermal- and electrical-conductive silver layer strongly attaches CNTs to the tungsten tips. Consequently, the field emitters exhibit good electron emission stability: continuous electron emission of around 100 μA at 2.3 V/μm has stably lasted over 40 h even at non-high vacuum ambient (~10−3 Pa.

  19. Stable Field Emitters for a Miniature X-ray Tube Using Carbon Nanotube Drop Drying on a Flat Metal Tip

    Science.gov (United States)

    Heo, Sung Hwan; Ihsan, Aamir; Yoo, Seung Hwa; Ali, Ghafar; Cho, Sung Oh

    2010-04-01

    Stable carbon nanotube (CNT) field emitters for a vacuum-sealed miniature X-ray tube have been fabricated. The field emitters with a uniform CNT coating are prepared by a simple drop drying of a CNT mixture solution that is composed of chemically modified multi-walled CNTs, silver nanoparticles, and isopropyl alcohol on flat tungsten tips. A highly thermal- and electrical-conductive silver layer strongly attaches CNTs to the tungsten tips. Consequently, the field emitters exhibit good electron emission stability: continuous electron emission of around 100 μA at 2.3 V/μm has stably lasted over 40 h even at non-high vacuum ambient (~10-3 Pa).

  20. Wavelength locking of single emitters and multi-emitter modules: simulation and experiments

    Science.gov (United States)

    Yanson, Dan; Rappaport, Noam; Peleg, Ophir; Berk, Yuri; Dahan, Nir; Klumel, Genady; Baskin, Ilya; Levy, Moshe

    2016-03-01

    Wavelength-stabilized high-brightness single emitters are commonly used in fiber-coupled laser diode modules for pumping Yb-doped lasers at 976 nm, and Nd-doped ones at 808 nm. We investigate the spectral behavior of single emitters under wavelength-selective feedback from a volume Bragg (or hologram) grating (VBG) in a multi-emitter module. By integrating a full VBG model as a multi-layer thin film structure with commercial raytracing software, we simulated wavelength locking conditions as a function of beam divergence and angular alignment tolerances. Good correlation between the simulated VBG feedback strength and experimentally measured locking ranges, in both VBG misalignment angle and laser temperature, is demonstrated. The challenges of assembling multi-emitter modules based on beam-stacked optical architectures are specifically addressed, where the wavelength locking conditions must be achieved simultaneously with high fiber coupling efficiency for each emitter in the module. It is shown that angular misorientation between fast and slow-axis collimating optics can have a dramatic effect on the spectral and power performance of the module. We report the development of our NEON-S wavelength-stabilized fiber laser pump module, which uses a VBG to provide wavelength-selective optical feedback in the collimated portion of the beam. Powered by our purpose-developed high-brightness single emitters, the module delivers 47 W output at 11 A from an 0.15 NA fiber and a 0.3 nm linewidth at 976 nm. Preliminary wavelength-locking results at 808 nm are also presented.