WorldWideScience

Sample records for controls technology fact

  1. Technology to Market Fact Sheet

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-02-01

    This fact sheet is an overview of the Technology to Market subprogram at the U.S. Department of Energy SunShot Initiative. The SunShot Initiative’s Technology to Market subprogram builds on SunShot’s record of moving groundbreaking and early-stage technologies and business models through developmental phases to commercialization. Technology to Market targets two known funding gaps: those that occur at the prototype commercialization stage and those at the commercial scale-up stage.

  2. Vehicle Technologies Fact of the Week 2013

    Energy Technology Data Exchange (ETDEWEB)

    Davis, Stacy Cagle [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Williams, Susan E. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Moore, Sheila A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Boundy, Robert Gary [Roltek, Inc., Clinton, TN (United States)

    2014-03-01

    Each week the U.S. Department of Energy s Vehicle Technology Office (VTO) posts a Fact of the Week on their website: http://www1.eere.energy.gov/vehiclesandfuels/ . These Facts provide statistical information, usually in the form of charts and tables, on vehicle sales, fuel economy, gasoline prices, and other transportation-related trends. Each Fact is a stand-alone page that includes a graph, text explaining the significance of the data, the supporting information on which the graph was based, and the source of the data. A link to the current week s Fact is available on the VTO homepage, but older Facts are archived and still available at: http://www1.eere.energy.gov/vehiclesandfuels/facts/. This report is a compilation of the Facts that were posted during calendar year 2013. The Facts were written and prepared by staff in Oak Ridge National Laboratory's Center for Transportation Analysis.

  3. Vehicle Technologies Fact of the Week 2015

    Energy Technology Data Exchange (ETDEWEB)

    Davis, Stacy C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Diegel, Susan W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Moore, Sheila A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Boundy, Robert G. [Roltek, Inc., Clinton, TN (United States)

    2016-05-01

    Each week the U.S. Department of Energy s Vehicle Technology Office (VTO) posts a Fact of the Week on their website: http://www1.eere.energy.gov/vehiclesandfuels/ . These Facts provide statistical information, usually in the form of charts and tables, on vehicle sales, fuel economy, gasoline prices, and other transportation-related trends. Each Fact is a stand-alone page that includes a graph, text explaining the significance of the data, the supporting information on which the graph was based, and the source of the data. A link to the current week s Fact is available on the VTO homepage, but older Facts (back to 2009) are archived and still available at: http://energy.gov/eere/vehicles/current-and-past-years-facts-week. Each Fact of the Week website page includes a link to an Excel file. That file contains the data from the Supporting Information section of the page so that researchers can easily use data from the Fact of the Week in their work. Beginning in August of 2015, a subscription list is available on the DOE website so that those interested can sign up for an email to be sent each Monday which includes the text and graphic from the current week s Fact. This report is a compilation of the Facts that were posted during calendar year 2015. The Facts were created, written and prepared by staff in Oak Ridge National Laboratory's Center for Transportation Analysis.

  4. Facts controllers in power transmission and distribution

    CERN Document Server

    Padiyar, KR

    2007-01-01

    About the Book: The emerging technology of Flexible AC Transmission System (FACTS) enables planning and operation of power systems at minimum costs, without compromising security. This is based on modern high power electronic systems that provide fast controllability to ensure ''flexible'' operation under changing system conditions. This book presents a comprehensive treatment of the subject by discussing the operating principles, mathematical models, control design and issues that affect the applications. The concepts are explained often with illustrative examples and case studies. In partic

  5. Wall Insulation; BTS Technology Fact Sheet

    Energy Technology Data Exchange (ETDEWEB)

    Southface Energy Institute; Tromly, K.

    2000-11-07

    Properly sealed, moisture-protected, and insulated walls help increase comfort, reduce noise, and save on energy costs. This fact sheet addresses these topics plus advanced framing techniques, insulation types, wall sheathings, and steps for effective wall construction and insulation.

  6. Advanced Wall Framing; BTS Technology Fact Sheet

    Energy Technology Data Exchange (ETDEWEB)

    Southface Energy Institute; Tromly, K.

    2000-11-07

    Advanced framing techniques for home construction have been researched extensively and proven effective. Both builders and home owners can benefit from advanced framing. Advanced framing techniques create a structurally sound home that has lower material and labor costs than a conventionally framed house. This fact sheet describes advanced framing techniques, design considerations, and framing.

  7. Vehicle Technologies' Fact of the Week 2011

    Energy Technology Data Exchange (ETDEWEB)

    Davis, Stacy Cagle [ORNL; Diegel, Susan W [ORNL; Boundy, Robert Gary [ORNL

    2012-04-01

    Each week the U.S. Department of Energy s Vehicle Technology Program (VTP) posts a Fact of the Week on their website: http://www1.eere.energy.gov/vehiclesandfuels/. These Facts provide statistical information, usually in the form of charts and tables, on vehicle sales, fuel economy, gasoline prices, and other transportation-related trends. Each Fact is a stand-alone page that includes a graph, text explaining the significance of the data, the supporting information on which the graph was based, and the source of the data. A link to the current Fact is available Monday through Friday on the VTP homepage, but older Facts are archived and still available at: http://www1.eere.energy.gov/vehiclesandfuels/facts/. This report is a compilation of the Facts that were posted during calendar year 2011. The Facts were written and prepared by staff in Oak Ridge National Laboratory's Center for Transportation Analysis.

  8. Vehicle Technologies' Fact of the Week 2012

    Energy Technology Data Exchange (ETDEWEB)

    Davis, Stacy Cagle [ORNL; Diegel, Susan W [ORNL; Moore, Sheila A [ORNL; Boundy, Robert Gary [ORNL

    2013-02-01

    Each week the U.S. Department of Energy s Vehicle Technology Office (VTO) posts a Fact of the Week on their website: http://www1.eere.energy.gov/vehiclesandfuels/ . These Facts provide statistical information, usually in the form of charts and tables, on vehicle sales, fuel economy, gasoline prices, and other transportation-related trends. Each Fact is a stand-alone page that includes a graph, text explaining the significance of the data, the supporting information on which the graph was based, and the source of the data. A link to the current week s Fact is available on the VTO homepage, but older Facts are archived and still available at: http://www1.eere.energy.gov/vehiclesandfuels/facts/. This report is a compilation of the Facts that were posted during calendar year 2012. The Facts were written and prepared by staff in Oak Ridge National Laboratory's Center for Transportation Analysis.

  9. Internet and information technologies: facts and fiction

    Science.gov (United States)

    McNeil, Ronald D.

    2001-10-01

    Information technology advances are spawning visions of radically altered modus operandi for commerce, education, business, information storage and receival. Proponents of virtual technology domination offer a world of instant communications, information sharing, and binary commerce. Some express alarm to the electronic visionaries and see an expected world vacated of human interactions, which is populated by e-hermits. The reality is that access to the Internet is becoming pervasive worldwide and affords a virtual community and markets. Governments, education, markets, businesses and consumers are rushing to exploit and adjust to an electronic, virtual world. The exploitation and adjustment to this an 'ether-world' transcends boundaries is a challenge to stakeholders. Public policy, international agreements, education, businesses and consumers face monumental change in the way they live and conduct their lives. As with most paradigms shifts, pioneers rush forward and launch a myriad of new startups with many failing and some standing the test of time and utility. An example is the early pioneers in North America who headed westward to in search of a new vision of riches. They established towns, developed farms, dug mines and began new businesses. However, many of the pioneers moved from one venture to another. Some of their endeavors ended with ghost towns, abandoned farms and mines, and bankrupt businesses. In the end, however, a great nation was born. This author expects the ether-world to go through similar starts, fits, and adjustments before it emerges as a more stable part of the fabric of society.

  10. Electric power supply 3. Dynamics, control and stabililty, quality of supply, grid planning, operational planning and control, control and information technology, FACTS, high-speed transmission. 3. rev. ed.; Elektrische Energieversorgung 3. Dynamik, Regelung und Stabilitaet, Versorgungsqualitaet, Netzplanung, Betriebsplanung und -fuehrung, Leit- und Informationstechnik, FACTS, HGUe

    Energy Technology Data Exchange (ETDEWEB)

    Westermann, Dirk [Technische Univ. Ilmenau (Germany). Inst. fuer elektrische Energie- und Steuerungstechnik; Crastan, Valentin

    2012-07-01

    In view of the large quantity of information, Vol. 2 was divided up into two volumes in the third edition. All three volumes combine theory with practical applicability and present exercises, examples and simulations. The authors have long experience in electric power supply and also teaching experience as university professors. Volume 3, which is published for the first time in the third edition, discusses the following subjects: Control and stability of the power transmission grid, grid planning, operational planning and control, grid control technology, flexible AC transmission systems (FACTS), and high-speed DC transmission systems. [German] Der zweite Band dieses umfassenden Lehr- und Nachschlagewerkes fuer Studenten und Ingenieure in der elektrischen Energietechnik wurde wegen der vielen Erweiterungen in zwei Teile aufgespalten, die fortan als Band 2 und 3 erscheinen. Die drei Baende der ''elektrischen Energieversorgung'' zeichnen sich durch die Synthese von theoretischer Fundierung und unmittelbarem Praxisbezug aus und unterstuetzen das Verstaendnis und den Lernerfolg mit Uebungsaufgaben, Modellbeispielen und Simulationen. Die Autoren schoepfen inhaltlich aus ihrer langjaehrigen Erfahrung auf dem Gebiet der Energieversorgung sowie didaktisch aus ihrer Lehrtaetigkeit als Professoren. Der erstmalig vorliegende dritte Band behandelt die Themen Regelung und Stabilitaet des Energieversorgungnetzes, Netzplanung, Betriebsplanung und -fuehrung, Netzleittechnik sowie Leistungselektronische Netzsteuerung (FACTS) und Hochpannungsgleichstromuebertragung. (orig.)

  11. Training for Fluency and Generalization of Math Facts Using Technology

    Science.gov (United States)

    Musti-Rao, Shobana; Lynch, Tom Liam; Plati, Erin

    2015-01-01

    As American students struggle with basic mathematical skills, the importance of math fact fluency has gained the attention of educators and researchers. Generalization of math fact fluency is also important for the transfer of skills to other settings and formats, assisting students in the completion of more varied and complicated math tasks. This…

  12. 2016 National Algal Biofuels Technology Review Fact Sheet

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-06-01

    Algae-based biofuels and bioproducts offer great promise in contributing to the U.S. Department of Energy (DOE) Bioenergy Technologies Office’s (BETO’s) vision of a thriving and sustainable bioeconomy fueled by innovative technologies. The state of technology for producing algal biofuels continues to mature with ongoing investment by DOE and the private sector, but additional research, development, and demonstration (RD&D) is needed to achieve widespread deployment of affordable, scalable, and sustainable algal biofuels.

  13. Wind turbines - facts from 20 years of technological progress

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, L.H.; Dannemand Andersen, P. [Risoe Ntaional Lab., Roskilde (Denmark)

    1999-03-01

    The first Danish commercial wind turbines were installed in the late 1970s. Over the last 20 years the Danish wind turbine market has been relatively stable concerning annual installations, and the wind turbine technology has been able to develop continuously. This gives a unique time track for technology analysts. The aim of this paper is to extract reliable information on this time track from existing archives and statistics. Seven generations of wind turbine technology have been identified mainly based on `characteristic` rotor diameters. The technological development of each generation is described using indicators such as: market share in Denmark, generator size, rotor diameter, hub height, electricity production and productivity. Economical indicators comprise: costs of turbine and standard foundation. (au)

  14. Advanced Process Technology: Combi Materials Science and Atmospheric Processing (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2011-06-01

    Capabilities fact sheet for the National Center for Photovoltaics: Process Technology and Advanced Concepts -- High-Throughput Combi Material Science and Atmospheric Processing that includes scope, core competencies and capabilities, and contact/web information.

  15. Technologies for Legionella Control

    Science.gov (United States)

    Presentation includes a review of new Office of Water document entitled "Technologies for Legionella Control in Premise Plumbing Systems", and discussion on ORD research projects involving Legionella and disinfection.

  16. Facts and fiction of learning systems. [decision making intelligent control

    Science.gov (United States)

    Saridis, G. N.

    1975-01-01

    The methodology that will provide the updated precision for the hardware control and the advanced decision making and planning in the software control is called learning systems and intelligent control. It was developed theoretically as an alternative for the nonsystematic heuristic approaches of artificial intelligence experiments and the inflexible formulation of modern optimal control methods. Its basic concepts are discussed and some feasibility studies of some practical applications are presented.

  17. NREL Helps Apply Renewable Energy and Energy Efficiency Technologies Worldwide (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2010-04-01

    The National Renewable Energy Laboratory (NREL) applies its technical expertise and capabilities to promote the use of renewable energy (RE) and energy efficiency (EE) technologies throughout the world. NREL's international work spans our full range of capabilities, which include three primary areas of expertise: 1. Analysis - NREL provides technology-neutral information, global and regional assessments and decision tools, and expert advice. 2. Research and Development - NREL conducts collaborative research and development (R&D) and shares methods and results with leading research institutions throughout the world. 3. Deployment/Commercialization - NREL teams with private industry, other countries, and international institutions to invest in RE and EE technologies. This fact sheet highlights NREL's international multilateral partnerships, bilateral partnerships, climate and environmental initiatives, and energy assessments and resources.

  18. Fact Sheet: Control Techniques Guidelines (CTG) for Shipbuilding and Ship Repair Facilities Operation (Surface Coating)

    Science.gov (United States)

    This page contains an August 1996 fact sheet with information regarding the CTG and Alternative Control Techniques (ACT) for Surface Coating at Shipbuilding and Ship Repair Facilities Operations. This document provides a summary of this guidance

  19. Environmental technology applications: fact file on toxic contaminants in industrial waste process streams

    Energy Technology Data Exchange (ETDEWEB)

    Newkirk, H.W.

    1977-05-11

    This report is a compendium of facts related to chemical materials present in industrial waste process streams which have already been declared or are being evaluated as hazardous under the Toxic Substances Control Act. Since some 400 chemicals are presently covered by consensus standards, the substances reviewed are only those considered to be a major threat to public health and welfare by Federal and State regulatory agencies. For each hazardous material cited, the facts relate, where possible, to an identification of the stationary industrial sources, the kind of waste stream impacted, proposed regulations and established effluent standards, the volume of emissions produced each year, the volume of emissions per unit of industrial product produced, present clean-up capabilities, limitations, and costs. These data should be helpful in providing information for the assessment of potential problems, should be of use to the manufacturers of pollution control equipment or of chemicals for pollution control, should be of use to the operators or potential operators of processes which produce pollutants, and should help to define industry-wide emission practices and magnitudes.

  20. Facts up front versus traffic light food labels: a randomized controlled trial.

    Science.gov (United States)

    Roberto, Christina A; Bragg, Marie A; Schwartz, Marlene B; Seamans, Marissa J; Musicus, Aviva; Novak, Nicole; Brownell, Kelly D

    2012-08-01

    The U.S. food and beverage industry recently released a new front-of-package nutrition labeling system called Facts Up Front that will be used on thousands of food products. To test consumer understanding of the Facts Up Front system (Facts Up Front) compared to the Multiple Traffic Light system (Traffic Light). Facts Up Front displays grams/milligrams and percentage daily value information for various nutrients; Traffic Light uses an interpretive color-coded scheme to alert consumers to low, medium, and high levels of certain nutrients. Participants in an Internet-based study were randomized to one of five front-of-package label conditions: (1) no label; (2) Traffic Light; (3) Traffic Light plus information about protein and fiber (Traffic Light+); (4) Facts Up Front; or (5) Facts Up Front plus information about "nutrients to encourage" (Facts Up Front+). A total of 703 adults recruited through an online database in May 2011 participated in this study, and data were analyzed in June 2011. Total percentage correct quiz scores were generated reflecting participants' ability to compare two foods on nutrient levels, based on their labels, and to estimate amounts of saturated fat, sugar, sodium, fiber and protein in the foods. The front-of-package label groups outperformed the control group on nearly all of the nutrient quizzes (pFacts Up Front group on the saturated fat quiz, or from the Facts Up Front+ group on the sugars quiz. Those in the Traffic Light+ group had the best overall performance (>80% on all quizzes). Overall, those in the Traffic Light+ condition performed better than those in the Facts Up Front conditions on measures of nutrition knowledge and label perceptions. This study is registered at clinicaltrials.gov NCT01626729. Copyright © 2012 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  1. Review of FACTS technologies and applications for power quality in smart grids with renewable energy systems

    DEFF Research Database (Denmark)

    Gandoman, Foad H.; Ahmadi, Abdollah; Sharaf, Adel M.

    2018-01-01

    the power quality. Also, distributed FACTSs play an important role in improving the power factor, energy utilization, enhancing the power quality, and ensuring efficient energy utilization and energy management in smart grids with renewable energy sources. This paper presents a literature survey of FACTS......In the last two decades, emerging use of renewable and distributed energy sources in electricity grid has created new challenges for the utility regarding the power quality, voltage stabilization and efficient energy utilization. Power electronic converters are extensively utilized to interface...... the emerging energy systems (without and with energy storage) and smart buildings with the transmission and distribution systems. Flexible ac transmission systems (FACTSs) and voltage-source converters, with smart dynamic controllers, are emerging as a stabilization and power filtering equipment to improve...

  2. Optimal placement of FACTS controller scheme for enhancement of power system security in Indian scenario

    Directory of Open Access Journals (Sweden)

    Imran Khan

    2015-09-01

    Full Text Available This paper presents a FACTS operation scheme to enhance the power system security. Three main generic types of FACTS devices are introduced. Line overloads are solved by controlling active power of series compensators and low voltages are solved by controlling reactive power of shunt compensators, respectively. Especially, the combined series-shunt compensators such as UPFC are applied to solve both line congestions and low voltages simultaneously. Two kinds of indices that indicate the security level related to line flow and bus voltage is utilized in this paper. They are iteratively minimized to determine operating points of the devices for security enhancement. The sensitivity vectors of the indices are derived to determine the direction of minimum. The proposed algorithm is verified on the IEEE 14-bus system with FACTS devices in a normal condition and in a line-faulted contingency.

  3. Emerging Engine Control Technologies

    DEFF Research Database (Denmark)

    Hendricks, Elbert; Chevalier, Alain

    1996-01-01

    In earlier work published by the author and co-authors, a dynamic model called a Mean Value Engine Model (MVEM) was developed. This model is physically based and is intended mainly for control applications. It is especially well suited to embedded model applications in engine controllers, susch...... as nonlinear observer based air/fuel ratio and advanced idle speed control. After a brief review of this model, it will be compared with other similar models which can be found in the literature. The attempt will be made to point out the differences between the new modified MVEM and those developed elsewhere...

  4. Clean Coal Technology Demonstration Program: Project fact sheets 2000, status as of June 30, 2000

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-09-01

    The Clean Coal Technology Demonstration Program (CCT Program), a model of government and industry cooperation, responds to the Department of Energy's (DOE) mission to foster a secure and reliable energy system that is environmentally and economically sustainable. The CCT Program represents an investment of over $5.2 billion in advanced coal-based technology, with industry and state governments providing an unprecedented 66 percent of the funding. With 26 of the 38 active projects having completed operations, the CCT Program has yielded clean coal technologies (CCTs) that are capable of meeting existing and emerging environmental regulations and competing in a deregulated electric power marketplace. The CCT Program is providing a portfolio of technologies that will assure that U.S. recoverable coal reserves of 274 billion tons can continue to supply the nation's energy needs economically and in an environmentally sound manner. As the nation embarks on a new millennium, many of the clean coal technologies have realized commercial application. Industry stands ready to respond to the energy and environmental demands of the 21st century, both domestically and internationally, For existing power plants, there are cost-effective environmental control devices to control sulfur dioxide (S02), nitrogen oxides (NO,), and particulate matter (PM). Also ready is a new generation of technologies that can produce electricity and other commodities, such as steam and synthetic gas, and provide efficiencies and environmental performance responsive to global climate change concerns. The CCT Program took a pollution prevention approach as well, demonstrating technologies that remove pollutants or their precursors from coal-based fuels before combustion. Finally, new technologies were introduced into the major coal-based industries, such as steel production, to enhance environmental performance. Thanks in part to the CCT Program, coal--abundant, secure, and economical

  5. Integrated control of wind farms, FACTS devices and the power network using neural networks and adaptive critic designs

    Science.gov (United States)

    Qiao, Wei

    Worldwide concern about the environmental problems and a possible energy crisis has led to increasing interest in clean and renewable energy generation. Among various renewable energy sources, wind power is the most rapidly growing one. Therefore, how to provide efficient, reliable, and high-performance wind power generation and distribution has become an important and practical issue in the power industry. In addition, because of the new constraints placed by the environmental and economical factors, the trend of power system planning and operation is toward maximum utilization of the existing infrastructure with tight system operating and stability margins. This trend, together with the increased penetration of renewable energy sources, will bring new challenges to power system operation, control, stability and reliability which require innovative solutions. Flexible ac transmission system (FACTS) devices, through their fast, flexible, and effective control capability, provide one possible solution to these challenges. To fully utilize the capability of individual power system components, e.g., wind turbine generators (WTGs) and FACTS devices, their control systems must be suitably designed with high reliability. Moreover, in order to optimize local as well as system-wide performance and stability of the power system, real-time local and wide-area coordinated control is becoming an important issue. Power systems containing conventional synchronous generators, WTGs, and FACTS devices are large-scale, nonlinear, nonstationary, stochastic and complex systems distributed over large geographic areas. Traditional mathematical tools and system control techniques have limitations to control such complex systems to achieve an optimal performance. Intelligent and bio-inspired techniques, such as swarm intelligence, neural networks, and adaptive critic designs, are emerging as promising alternative technologies for power system control and performance optimization. This

  6. Nutrition Facts Use in Relation to Eating Behaviors and Healthy and Unhealthy Weight Control Behaviors.

    Science.gov (United States)

    Christoph, Mary J; Loth, Katie A; Eisenberg, Marla E; Haynos, Ann F; Larson, Nicole; Neumark-Sztainer, Dianne

    2017-12-21

    Investigate the relationship between use of Nutrition Facts labels on packaged foods and weight-related behaviors. Cross-sectional survey in 2015-2016. Young adult respondents (n = 1,817; 57% women; average age 31.0 ± 1.6 years) to the Project Eating and Activity in Teens and Young Adults-IV survey, the fourth wave of a longitudinal cohort study. Use of Nutrition Facts labels on packaged foods; healthy, unhealthy, and extreme weight control behaviors; intuitive eating; binge eating. Linear and logistic regression models were adjusted for age, ethnicity/race, education, income, and weight status. In women, greater Nutrition Facts use was associated with a 23% and 10% greater likelihood of engaging in healthy and unhealthy weight control behaviors, respectively, and a 17% greater chance of engaging in binge eating. In men, greater label use was associated with a 27% and 17% greater likelihood of engaging in healthy and unhealthy weight control behaviors, respectively, and a lower level of intuitive eating. Professionals advising patients and clients on weight management may consider possible gender differences in response to weight loss and management guidance. Since label use was related to engagement in some unhealthy behaviors in addition to healthy behaviors, it is important to consider how individuals may use labels, particularly those at risk for, or engaging in, disordered eating behaviors. Future research investigating potential relationships between Nutrition Facts use, intuitive eating, and binge eating is needed. Copyright © 2017 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

  7. Building State-of-the-Art Wind Technology Testing Facilities (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2012-03-01

    The new Wind Technology Test Center is the only facility in the nation capable of testing wind turbine blades up to 90 meters in length. A critical factor to wind turbine design and development is the ability to test new designs, components, and materials. In addition, wind turbine blade manufacturers are required to test their blades as part of the turbine certification process. The National Renewable Energy Laboratory (NREL) partnered with the U.S. Department of Energy (DOE) Wind Program and the Massachusetts Clean Energy Center (MassCEC) to design, construct, and operate the Wind Technology Center (WTTC) in Boston, Massachusetts. The WTTC offers a full suite of certification tests for turbine blades up to 90 meters in length. NREL worked closely with MTS Systems Corporation to develop the novel large-scale test systems needed to conduct the static and fatigue tests required for certification. Static tests pull wind turbine blades horizontally and vertically to measure blade deflection and strains. Fatigue tests cycle the blades millions of times to simulate what a blade goes through in its lifetime on a wind turbine. For static testing, the WTTC is equipped with servo-hydraulic winches and cylinders that are connected to the blade through cables to apply up to an 84-mega Newton meter maximum static bending moment. For fatigue testing, MTS developed a commercial version of NREL's patented resonant excitation system with hydraulic cylinders that actuate linear moving masses on the blade at one or more locations. This system applies up to a 21-meter tip-to-tip fatigue test tip displacement to generate 20-plus years of cyclic field loads in a matter of months. NREL also developed and supplied the WTTC with an advanced data acquisition system capable of measuring and recording hundreds of data channels at very fast sampling rates while communicating with test control systems.

  8. Drug Facts

    Medline Plus

    Full Text Available ... Cocaine (Coke, Crack) Facts Heroin (Smack, Junk) Facts Marijuana (Weed, Pot) Facts MDMA (Ecstasy, Molly) Facts Meth (Crank, Ice) Facts Pain Medicine (Oxy, Vike) Facts Spice (K2) Facts Tobacco and Nicotine Facts Other Drugs of Abuse What is Addiction? What are some signs and symptoms ...

  9. Drug Facts

    Medline Plus

    Full Text Available ... Facts Bath Salts Facts Cocaine (Coke, Crack) Facts Heroin (Smack, Junk) Facts Marijuana (Weed, Pot) Facts MDMA ( ... Videos Information About Drugs Alcohol Bath Salts Cocaine Heroin Marijuana MDMA Meth Pain Medicines Spice (K2) Tobacco/ ...

  10. Available transfer capability evaluation and enhancement using various FACTS controllers: Special focus on system security

    Directory of Open Access Journals (Sweden)

    M. Venkateswara Rao

    2016-03-01

    Full Text Available Nowadays, because of the deregulation of the power industry the continuous increase of the load increases the necessity of calculation of available transfer capability (ATC of a system to analyze the system security. With this calculation, the scheduling of generator can be decided to decrease the system severity. Further, constructing new transmission lines, new substations are very cost effective to meet the increasing load and to increase the transfer capability. Hence, an alternative way to increase the transfer capability is use of flexible ac transmission system (FACTS controllers. In this paper, SSSC, STACOM and UPFC are considered to show the effect of these controllers in enhancing system ATC. For this, a novel current based modeling and optimal location strategy of these controllers are presented. The proposed methodology is tested on standard IEEE-30 bus and IEEE-57 bus test systems with supporting numerical and graphical results.

  11. Cholera Fact Sheet

    Science.gov (United States)

    ... sheets Fact files Questions & answers Features Multimedia Contacts Cholera Fact sheet Updated December 2017 Key facts Cholera ... behaviour and to the control of cholera. Oral cholera vaccines Currently there are three WHO pre-qualified ...

  12. Revealing facts behind spray dried solid dispersion technology used for solubility enhancement

    Science.gov (United States)

    Patel, Bhavesh B.; Patel, Jayvadan K.; Chakraborty, Subhashis; Shukla, Dali

    2013-01-01

    Poor solubility and bioavailability of an existing or newly synthesized drug always pose challenge in the development of efficient pharmaceutical formulation. Numerous technologies can be used to improve the solubility and among them amorphous solid dispersion based spray drying technology can be successfully useful for development of product from lab scale to commercial scale with a wide range of powder characteristics. Current review deals with the importance of spray drying technology in drug delivery, basically for solubility and bioavailability enhancement. Role of additives, selection of polymer, effect of process and formulation parameters, scale up optimization, and IVIVC have been covered to gain the interest of readers about the technology. Design of experiment (DoE) to optimize the spray drying process has been covered in the review. A lot more research work is required to evaluate spray drying as a technology for screening the right polymer for solid dispersion, especially to overcome the issue related to drug re-crystallization and to achieve a stable product both in vitro and in vivo. Based on the recent FDA recommendation, the need of the hour is also to adopt Quality by Design approach in the manufacturing process to carefully optimize the spray drying technology for its smooth transfer from lab scale to commercial scale. PMID:27134535

  13. The KinFact intervention - a randomized controlled trial to increase family communication about cancer history.

    Science.gov (United States)

    Bodurtha, Joann N; McClish, Donna; Gyure, Maria; Corona, Rosalie; Krist, Alexander H; Rodríguez, Vivian M; Maibauer, Alisa M; Borzelleca, Joseph; Bowen, Deborah J; Quillin, John M

    2014-10-01

    Knowing family history is important for understanding cancer risk, yet communication within families is suboptimal. Providing strategies to enhance communication may be useful. Four hundred ninety women were recruited from urban, safety-net, hospital-based primary care women's health clinics. Participants were randomized to receive the KinFact intervention or the control handout on lowering risks for breast/colon cancer and screening recommendations. Cancer family history was reviewed with all participants. The 20-minute KinFact intervention, based in communication and behavior theory, included reviewing individualized breast/colon cancer risks and an interactive presentation about cancer and communication. Study outcomes included whether participants reported collecting family history, shared cancer risk information with relatives, and the frequency of communication with relatives. Data were collected at baseline, 1, 6, and 14 months. Overall, intervention participants were significantly more likely to gather family cancer information at follow-up (odds ratio [OR]: 2.73; 95% confidence interval [CI]: 2.01, 3.71) and to share familial cancer information with relatives (OR: 1.85; 95% CI: 1.37, 2.48). Communication frequency (1=not at all; 4=a lot) was significantly increased at follow-up (1.67 vs. 1.54). Differences were not modified by age, race, education, or family history. However, effects were modified by pregnancy status and genetic literacy. Intervention effects for information gathering and frequency were observed for nonpregnant women but not for pregnant women. Additionally, intervention effects were observed for information gathering in women with high genetic literacy, but not in women with low genetic literacy. The KinFact intervention successfully promoted family communication about cancer risk. Educating women to enhance their communication skills surrounding family history may allow them to partner more effectively with their families and ultimately

  14. Drug Facts

    Medline Plus

    Full Text Available ... Search form Search Menu Home Drugs That People Abuse Alcohol Facts Bath Salts Facts Cocaine (Coke, Crack) ... Facts Tobacco and Nicotine Facts Other Drugs of Abuse What is Addiction? What are some signs and ...

  15. Drug Facts

    Medline Plus

    Full Text Available ... Ecstasy, Molly) Facts Meth (Crank, Ice) Facts Pain Medicine (Oxy, Vike) Facts Spice (K2) Facts Tobacco and ... Bath Salts Cocaine Heroin Marijuana MDMA Meth Pain Medicines Spice (K2) Tobacco/Nicotine Other Drugs You can ...

  16. Drug Facts

    Medline Plus

    Full Text Available ... Cocaine (Coke, Crack) Facts Heroin (Smack, Junk) Facts Marijuana (Weed, Pot) Facts MDMA (Ecstasy, Molly) Facts Meth ( ... Information About Drugs Alcohol Bath Salts Cocaine Heroin Marijuana MDMA Meth Pain Medicines Spice (K2) Tobacco/Nicotine ...

  17. Drug Facts

    Medline Plus

    Full Text Available ... MDMA (Ecstasy, Molly) Facts Meth (Crank, Ice) Facts Pain Medicine (Oxy, Vike) Facts Spice (K2) Facts Tobacco ... Alcohol Bath Salts Cocaine Heroin Marijuana MDMA Meth Pain Medicines Spice (K2) Tobacco/Nicotine Other Drugs You ...

  18. Drug Facts

    Medline Plus

    Full Text Available ... That People Abuse Alcohol Facts Bath Salts Facts Cocaine (Coke, Crack) Facts Heroin (Smack, Junk) Facts Marijuana ( ... Watch Videos Information About Drugs Alcohol Bath Salts Cocaine Heroin Marijuana MDMA Meth Pain Medicines Spice (K2) ...

  19. Drug Facts

    Medline Plus

    Full Text Available ... Marijuana (Weed, Pot) Facts MDMA (Ecstasy, Molly) Facts Meth (Crank, Ice) Facts Pain Medicine (Oxy, Vike) Facts ... Drugs Alcohol Bath Salts Cocaine Heroin Marijuana MDMA Meth Pain Medicines Spice (K2) Tobacco/Nicotine Other Drugs ...

  20. Drug Facts

    Medline Plus

    Full Text Available ... Cocaine (Coke, Crack) Facts Heroin (Smack, Junk) Facts Marijuana (Weed, Pot) Facts MDMA (Ecstasy, Molly) Facts Meth (Crank, ... Information About Drugs Alcohol Bath Salts Cocaine Heroin Marijuana MDMA Meth Pain Medicines Spice (K2) Tobacco/Nicotine ...

  1. Smart control application in the oscillations using FACTS (STATCOM and SVC

    Directory of Open Access Journals (Sweden)

    Alfonso James Alzate Gomez

    2017-07-01

    Full Text Available Context: Reducing the oscillations of the electrical power systems is an important task in order to maintain their stability. This paper presents a methodology for adjusting the parameters of a fuzzy oscillations controller with a Static Var Compensator (SVC and a Static Synchronous Compensator (STATCOM. Methodology: The methodology consists of tuning a fuzzy controller to dampen oscillations in an electrical power system, with different optimization techniques such as: Genetic Algorithms (GA, Particle Swarm Optimization (PSO, and Chaotic Optimization Algorithm (COA. Results: The voltage and speed oscillations of a system composed of a synchronous machine connected to an infinite bus bar (SMIB are obtained through simulations. There is data before and after connecting a SVC and a STATCOM, installed independently and in different operating conditions. The results obtained show that using a technique for adjusting parameters in the fuzzy controller is better than the adjustment of trial and error. Conclusion: With the obtained results, it is possible to verify the effectiveness of the fuzzy controller using Flexible AC Transmissions Systems (FACTS.

  2. Space Station Displays and Controls Technology Evolution

    Science.gov (United States)

    Blackburn, Greg C.

    1990-01-01

    Viewgraphs on space station displays and controls technology evolution are presented. Topics covered include: a historical perspective; major development objectives; current development activities; key technology areas; and technology evolution issues.

  3. The social construction of facts and artefacts: or How the sociology of science and the sociology of technology might benefit each other

    NARCIS (Netherlands)

    Pinch, Trevor J.; Bijker, Wiebe E.

    1984-01-01

    The need for an integrated social constructivist approach towards the study of science and technology is outlined. Within such a programme both scientific facts and technological artefacts are to be understood as social constructs. Literature on the sociology of science, the science-technology

  4. SKA CSP controls: technological challenges

    Science.gov (United States)

    Baffa, C.; Giani, E.; Vrcic, S.; Vela Nuñez, M.

    2016-07-01

    The Square Kilometer Array (SKA) project is an international effort to build the world's largest radio telescope, with eventually over a square kilometer of collecting area. For SKA Phase 1, Australia will host the low-frequency instrument with more than 500 stations, each containing around 250 individual antennas, whilst South Africa will host an array of close to 200 dishes. The scale of the SKA represents a huge leap forward in both engineering and research and development towards building and delivering a unique instrument, with the detailed design and preparation now well under way. As one of the largest scientific endeavors in history, the SKA will brings together close to 100 organizations from 20 countries. Every aspect of the design and development of such a large and complex instrument requires state-of-the-art technology and innovative approach. This poster (or paper) addresses some aspects of the SKA monitor and control system, and in particular describes the development and test results of the CSP Local Monitoring and Control prototype. At the SKA workshop held in April 2015, the SKA monitor and control community has chosen TANGO Control System as a framework, for the implementation of the SKA monitor and control. This decision will have a large impact on Monitor an Control development of SKA. As work is on the way to incorporate TANGO Control System in SKA is in progress, we started to development a prototype for the SKA Central Signal Processor to mitigate the associated risks. In particular we now have developed a uniform class schema proposal for the sub-Element systems of the SKA-CSP.

  5. Mercury emissions control technologies for mixed waste thermal treatment

    Energy Technology Data Exchange (ETDEWEB)

    Chambers, A.; Knecht, M.; Soelberg, N.; Eaton, D. [Lockheed Martin Idaho Technologies Co., Idaho Falls, ID (United States). Idaho National Engineering and Environmental Lab.; Roberts, D.; Broderick, T. [ADA Technologies, Englewood, CO (United States)

    1997-12-31

    EPA has identified wet scrubbing at low mercury feedrates, as well as carbon adsorption via carbon injection into the offgas or via flow through fixed carbon beds, as control technologies that can be used to meet the proposed Maximum Achievable Control Technology (MACT) rule limit for mercury emissions from hazardous waste incinerators. DOE is currently funding demonstrations of gold amalgamation that may also control mercury to the desired levels. Performance data from a variety of sources was reviewed to determine ranges of achievable mercury control. Preliminary costs were estimated for using these technologies to control mercury emissions from mixed waste incineration. Mercury emissions control for mixed waste incineration may need to be more efficient than for incineration of other hazardous wastes because of higher mercury concentrations in some mixed waste streams. However, mercury control performance data for wet scrubbing and carbon adsorption is highly variable. More information is needed to demonstrate control efficiencies that are achievable under various design and operating conditions for wet scrubbing, carbon adsorption, and gold amalgamation technologies. Given certain assumptions made in this study, capital costs, operating costs, and lifecycle costs for carbon injection, carbon beds, and gold amalgamation generally vary for different assumed mercury feedrates and for different offgas flowrates. Assuming that these technologies can in fact provide the necessary mercury control performance, each of these technologies may be less costly than the others for certain mercury feedrates and the offgas flowrates.

  6. ROMANIA’S FACTS ABOUT INTERNAL CONTROL ENVIRONMENT OF EUROPEAN SOCIAL FUND FINANCED PROJECTS

    Directory of Open Access Journals (Sweden)

    Dogar Cristian

    2012-07-01

    Full Text Available The malfunctioning of internal control system of European Social Fund (ESF financed interventions may prejudice the sound financial management principle. Incorporating COSO principles in the beneficiary’s internal control systems may provide some warranties about compliance to the above mentioned principle as described in the EC Regulation 1605-2002. This study aims to explore some facts in actual internal control environment, as a base for future improvements of Romanian ESF beneficiary’s internal control systems ESF financed interventions covers a large range of costs for implementing labor market related services. But supporting costs according to the sound financial management principle calls for best value for money in real and legal operations. Without some specifics from the donor or a mutual accepted best practice model, most of the ESF beneficiaries are reporting their efforts to actual researches and specialized literature regarding internal control system implementation in services. This study was realized in April 2012 by applying an investigation instrument, an on-line questionnaire collecting both opinions and factual data as well to a number of 962 members of a practice community for ESF interventions implementation. This technique was used to test hypotheses regarding the premises existence for a future improvement of the existing internal control system model. 100 members of this community: managers, accountants, auditors financial responsible and other team members answered anonymously, revealing a real concern for internal control, providing as well a different side image for this. Analyzing all stakeholder answers, we may consider that our hypothesis is correct and there is a real need for internal control environment improvements. This study is a part of a larger research “New models of the accounting and internal control systems of ESF financed interventions in Romania”, addressing a qualitative

  7. Drug Facts

    Medline Plus

    Full Text Available ... Home Drugs That People Abuse Alcohol Facts Bath Salts Facts Cocaine (Coke, Crack) Facts Heroin (Smack, Junk) ... treatment. Watch Videos Information About Drugs Alcohol Bath Salts Cocaine Heroin Marijuana MDMA Meth Pain Medicines Spice ( ...

  8. Drug Facts

    Medline Plus

    Full Text Available ... form Search Menu Home Drugs That People Abuse Alcohol Facts Bath Salts Facts Cocaine (Coke, Crack) Facts ... addiction, and treatment. Watch Videos Information About Drugs Alcohol Bath Salts Cocaine Heroin Marijuana MDMA Meth Pain ...

  9. Attention Feedback Awareness and Control Training (A-FACT): experimental test of a novel intervention paradigm targeting attentional bias.

    Science.gov (United States)

    Bernstein, Amit; Zvielli, Ariel

    2014-04-01

    We present an experimental investigation of a novel intervention paradigm targeting attentional bias - Attention Feedback Awareness and Control Training (A-FACT). A-FACT is grounded in the novel hypothesis that training awareness of (biased) attentional allocation will lead to greater self-regulatory control of attention and thereby ameliorate attentional bias and its maladaptive sequelae. To do so, A-FACT delivers computerized, personalized, real-time feedback regarding a person's (biased) allocation of attention concurrent with its expression. In a randomized control experimental design, we tested A-FACT relative to an active placebo control condition among anxious adults (N=40, 52.5% women, M(SD)=24.3(4) years old). We found that relative to the placebo control condition, A-FACT led to: (a) reduced levels of attentional bias to threat; (b) (non-significantly) lower rate of behavioral avoidance of exposure to an anxiogenic stressor; and (c) faster rate of emotional recovery following the stressor. The findings are discussed with respect to the novelty and significance of the proposed conceptual perspective, methodology, and intervention paradigm targeting attentional bias. Copyright © 2014 Elsevier Ltd. All rights reserved.

  10. A randomised controlled trial of a theory of planned behaviour to increase fruit and vegetable consumption. Fresh Facts.

    Science.gov (United States)

    Kothe, Emily J; Mullan, Barbara A

    2014-07-01

    Young adults are less likely than other adults to consume fruit and vegetables. Fresh Facts is a theory of planned behaviour based intervention designed to promote fruit and vegetable consumption. The present study sought to evaluate Fresh Facts using a randomised controlled trial. Australian young adults (n = 162) were allocated to the Fresh Facts intervention or to the control group in 2011. Intervention participants received automated email messages promoting fruit and vegetable consumption every 3 days over the course of the 1 month intervention. Messages targeted attitude, subjective norm, and perceived behavioural control. Theory of planned behaviour variables and fruit and vegetable intake were measured at baseline and post-intervention (Day 30). Significant increases in attitude and subjective norm relative to control were found among Fresh Facts participants. However, intention, perceived behavioural control and fruit and vegetable consumption did not change as a result of the intervention. Changes in intention reported by each participant between baseline and follow-up were not correlated with corresponding changes in fruit and vegetable consumption. Fresh Facts was not successful in increasing fruit and vegetable consumption. Current evidence does not support the use of the theory of planned behaviour in the design of interventions to increase fruit and vegetable intake in this population. Copyright © 2014 Elsevier Ltd. All rights reserved.

  11. Technology assessment of alternative fuels for the transportation sector. Fact sheets on technology elements and system calculations for technology tracks; Teknologivurdering af alternative drivmidler til transportsektoren. Fakta-ark for teknologi-elementer og systemberegninger for teknologi-spor

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-05-15

    The report documents an analysis, which aims at evaluating technologies in connection with alternative fuels for the transportation sector. During the analysis process a method has been developed for consistent evaluation of alternative transportation fuels with the largest technological and economic potential. This appendix presents key fact sheets which substantiate the analysis presented in the report 'Technology assessment of alternative fuels for the transportation sector'. (BA)

  12. Recent Technology Advances in Distributed Engine Control

    Science.gov (United States)

    Culley, Dennis

    2017-01-01

    This presentation provides an overview of the work performed at NASA Glenn Research Center in distributed engine control technology. This is control system hardware technology that overcomes engine system constraints by modularizing control hardware and integrating the components over communication networks.

  13. Transient stability enhancement of wind farms using power electronics and facts controllers

    Science.gov (United States)

    Mohammadpour, Hossein Ali

    network, and the frequency of the exchanged energy is below the fundamental frequency of the system. This phenomenon may cause severe damage in the wind farm, if not prevented. Therefore, this dissertation deals with the SSR phenomena in a capacitive series compensated wind farm. A DFIG-based wind farm, which is connected to a series compensated transmission line, is considered as a case study. The small-signal stability analysis of the system is presented, and the eigenvalues of the system are obtained. Using both modal analysis and time-domain simulation, it is shown that the system is potentially unstable due to the SSR mode. Then, three different possibilities for the addition of SSR damping controller (SSRDC) are investigated. The SSRDC can be added to (1) gate-controlled series capacitor (GCSC), (2) thyristor-controlled series capacitor (TCSC), or (3) DFIG rotor-side converter (RSC) and grid-side converter (GSC) controllers. The first and second cases are related to the series flexible AC transmission systems (FACTS) family, and the third case uses the DFIG back-to-back converters to damp the SSR. The SSRDC is designed using residue-based analysis and root locus diagrams. Using residue-based analysis, the optimal input control signal (ICS) to the SSRDC is identified that can damp the SSR mode without destabilizing other modes, and using root-locus analysis, the required gain for the SSRDC is determined. Moreover, two methods are discussed in order to estimate the optimum input signal to the SSRDC, without measuring it directly. In this dissertation, MATLAB/Simulink is used as a tool for modeling and design of the SSRDC, and PSCAD/EMTDC is used to perform time-domain simulation in order to verify the design process.

  14. Drug Facts

    Medline Plus

    Full Text Available ... to main content Easy-to-Read Drug Facts Search form Search Menu Home Drugs That People Abuse Alcohol Facts ... Past Drug Use Prevention Phone Numbers and Websites Search Share Government Shutdown Because of a lapse in ...

  15. Drug Facts

    Medline Plus

    Full Text Available ... Search form Search Menu Home Drugs That People Abuse Alcohol Facts Bath Salts Facts Cocaine (Coke, Crack) Facts ... text to you. This website talks about drug abuse, addiction, and treatment. Watch Videos Information About Drugs Alcohol Bath Salts Cocaine Heroin Marijuana MDMA Meth Pain ...

  16. Drug Facts

    Medline Plus

    Full Text Available ... Oxy, Vike) Facts Spice (K2) Facts Tobacco and Nicotine Facts Other Drugs of Abuse What is Addiction? ... Marijuana MDMA Meth Pain Medicines Spice (K2) Tobacco/Nicotine Other Drugs You can call 1-800-662- ...

  17. An overview of smoke control technology

    Science.gov (United States)

    Klote, John H.

    1987-09-01

    Considerable advances in smoke control technology have taken place in the last few decades. However, smoke control is just beginning to take its proper place as a fire protection tool. This paper provides an overview of this technology including discussions of the fundamental principles, stairwell pressurization, zone smoke control, elevator smoke control, system activation, and acceptance testing. In addition, the problems of smoke purging are addressed.

  18. Acidic emissions control technology and costs

    Energy Technology Data Exchange (ETDEWEB)

    Emmel, T.E.; Waddell, J.T.; Adams, R.C. (Radian Corp. (US))

    1989-01-01

    This book describes acidic emissions control technology and costs. The objectives are: to identify and characterize stationary combustion and industrial sources of directly emitted acidic materials in the United States; to evaluate the feasibility of control technologies for these sources; and to estimate the costs of applying these control technologies. This book gives results of estimates, using a model plant approach, of costs for retrofitting selected acidic emission control systems to utility and industrial boilers, Claus sulfur recovery plants, catalytic cracking units, primary copper smelters, coke oven plants, primary aluminum smelters, and municipal solid waste incinerators.

  19. Damping Improvement of Multiple Damping Controllers by Using Optimal Coordinated Design Based on PSS and FACTS-POD in a Multi-Machine Power System

    Directory of Open Access Journals (Sweden)

    Ali Nasser Hussain

    2016-09-01

    Full Text Available The aim of this study is to present a comprehensive comparison and assessment of the damping function improvement of power system oscillation for the multiple damping controllers using the simultaneously coordinated design based on Power System Stabilizer (PSS and Flexible AC Transmission System (FACTS devices. FACTS devices can help in the enhancing the stability of the power system by adding supplementary damping controller to the control channel of the FACTS input to implement the task of Power Oscillation Damping (FACT POD controller. Simultaneous coordination can be performed in different ways. First, the dual coordinated designs between PSS and FACTS POD controller or between different FACTS POD controllers are arranged in a multiple FACTS devices without PSS. Second, the simultaneous coordination has been extended to triple coordinated design among PSS and different FACTS POD controllers. The parameters of the damping controllers have been tuned in the individual controllers and coordinated designs by using a Chaotic Particle Swarm Optimization (CPSO algorithm that optimized the given eigenvalue-based objective function. The simulation results for a multi-machine power system show that the dual coordinated design provide satisfactory damping performance over the individual control responses. Furthermore, the triple coordinated design has been shown to be more effective in damping oscillations than the dual damping controllers.

  20. Drug Facts

    Medline Plus

    Full Text Available ... to main content Easy-to-Read Drug Facts Search form Search Menu Home Drugs That People Abuse Alcohol Facts ... Past Drug Use Prevention Phone Numbers and Websites Search Share Listen English Español Information about this page ...

  1. TECHNOLOGICAL OPTIONS FOR ACID RAIN CONTROL

    Science.gov (United States)

    Discussed are acid rain control options available to the electric utility industry. They include coal switching, flue gas desulfurization, and such emerging lower cost technologies as Limestone Injection Multistage Burners (LIMB) and Advanced Silicate (ADVACATE), both developed ...

  2. Site-specific weed control technologies

    DEFF Research Database (Denmark)

    Christensen, Svend; Søgaard, Henning Tangen; Kudsk, Per

    2009-01-01

    Site-specific weed control technologies are defined as machinery or equipment embedded with technologies that detect weeds growing in a crop and, taking into account predefined factors such as economics, takes action to maximise the chances of successfully controlling them. In the article, we...... describe the basic parts of site specific weed control technologies, comprising of weed sensing systems, weed management models and precision weed control implements. A review of state-of-the-art technologies shows that several weed sensing systems and precision implements have been developed over the last...... two decades, though barriers prevent their breakthrough. Most important among these is the lack of a truly robust weed recognition method, owing to mutual shading among plants and limitations in the capacity of highly accurate spraying and weeding apparatuses.   Another barrier is the lack...

  3. Electronic control/display interface technology

    Science.gov (United States)

    Parrish, R. V.; Busquets, A. M.; Murray, R. F.; Hatfield, J. J.

    1985-01-01

    An effort to produce a representative workstation for the Space Station Data Management Test Bed that provides man/machine interface design options for consolidating, automating, and integrating the space station work station, and hardware/software technology demonstrations of space station applications is discussed. The workstation will emphasize the technologies of advanced graphics engines, advanced display/control medias, image management techniques, multifunction controls, and video disk utilizations.

  4. Technology innovations and experience curves for nitrogen oxides control technologies

    Energy Technology Data Exchange (ETDEWEB)

    Sonia Yeh; Edward S. Rubin; Margaret R. Taylor; David A. Hounshell [U.S. Environmental Protection Agency, Research Triangle Park, NC (United States). National Risk Management Research Laboratory, Office of Research and Development,

    2005-12-15

    This paper reviews the regulatory history for nitrogen oxides (NOx) pollutant emissions from stationary sources, primarily in coal-fired power plants. Nitrogen dioxide (NO{sub 2}) is one of the six criteria pollutants regulated by the 1970 Clean Air Act where National Ambient Air Quality Standards were established to protect public health and welfare. Patent data are used to show that in the cases of Japan, Germany, and the United States, innovations in NOx control technologies did not occur until stringent government regulations were in place, thus 'forcing' innovation. It is demonstrated that reductions in the capital and operation and maintenance (O&M) costs of new generations of high-efficiency NOx control technologies, selective catalytic reduction (SCR), are consistently associated with the increasing adoption of the control technology: the so-called learning-by-doing phenomena. The results show that as cumulative world coal-fired SCR capacity doubles, capital costs decline to {approximately} 86% and O&M costs to 58% of their original values. The observed changes in SCR technology reflect the impact of technological advance as well as other factors, such as market competition and economies of scale. 38 refs., 10 figs., 3 tabs.

  5. Aplicación del control inteligente en el amortiguamiento de oscilaciones usando FACTS (STATCOM y SVC)

    OpenAIRE

    Bedoya Londoño, Andrea

    2014-01-01

    En este trabajo se describe el desarrollo de un controlador de oscilaciones, tanto para el STATCOM como para el SVC, usando algunos métodos de control inteligente. Se presenta el desarrollo de un controlador difuso sintonizado con técnicas de optimización, tales como, AG, PSO y COA como una opción moderna que permite encontrar los mejores parámetros del control difuso aplicado a los dispositivos FACTS (STATCOM Y SVC), con el fin de lograr amortiguar las oscilaciones del sistema de potencia y ...

  6. Ferret facts

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This update functions to inform cooperators on the latest, most recent facts on the 1994 Montana Black-footed Ferret Reintroduction. This is a weekly update,...

  7. Liver Facts

    Science.gov (United States)

    ... Page Transplant Living > Organ facts and surgeries > Liver Liver The liver is one of the largest and ... lobes. Detail of the liver How does your liver work? The liver has many functions that are ...

  8. Drug Facts

    Medline Plus

    Full Text Available ... Nicotine Facts Other Drugs of Abuse What is Addiction? What are some signs and symptoms of someone ... use problem? How Does Drug Use Become an Addiction? What Makes Someone More Likely to Get Addicted ...

  9. A new adaptive controller of facts-based FMRLC aimed at improving power system stability

    Directory of Open Access Journals (Sweden)

    Abdellatif Naceri

    2008-01-01

    Full Text Available Various control techniques using Advanced Super-conducting Magnetic Energy Storage (ASMES aimed at improving power system stability have been proposed. As fuzzy controller has proved its value in some applications, the number of investigations employing fuzzy controller with ASMES has been greatly increased over recent period. Nevertheless, it is sometimes difficult to specify the rule base for some plants, or the need can arise for tuning the rule-base parameters if the plant changes. In order to solve such problems the Fuzzy Model Reference Learning Controller (FMRLC is proposed. This paper investigates multi-inputs/multi-outputs FMRLC for time-variant nonlinear system. This provides the motivation for adaptive fuzzy control, whereby the focus is placed on the automatic on-line synthesis and tuning of fuzzy controller parameters (i.e., the use of on-line data for continuous learning of the fuzzy controller which ensures that the performance objectives are met. The simulation results show that the proposed robust controller is able to work with nonlinear power system (i.e., single machine connected at infinite bus, under various fault conditions and significant disturbances.

  10. Developing an Integration Infrastructure for Distributed Engine Control Technologies

    Science.gov (United States)

    Culley, Dennis; Zinnecker, Alicia; Aretskin-Hariton, Eliot; Kratz, Jonathan

    2014-01-01

    Turbine engine control technology is poised to make the first revolutionary leap forward since the advent of full authority digital engine control in the mid-1980s. This change aims squarely at overcoming the physical constraints that have historically limited control system hardware on aero-engines to a federated architecture. Distributed control architecture allows complex analog interfaces existing between system elements and the control unit to be replaced by standardized digital interfaces. Embedded processing, enabled by high temperature electronics, provides for digitization of signals at the source and network communications resulting in a modular system at the hardware level. While this scheme simplifies the physical integration of the system, its complexity appears in other ways. In fact, integration now becomes a shared responsibility among suppliers and system integrators. While these are the most obvious changes, there are additional concerns about performance, reliability, and failure modes due to distributed architecture that warrant detailed study. This paper describes the development of a new facility intended to address the many challenges of the underlying technologies of distributed control. The facility is capable of performing both simulation and hardware studies ranging from component to system level complexity. Its modular and hierarchical structure allows the user to focus their interaction on specific areas of interest.

  11. Building America Case Study: Boiler Control Replacement for Hydronically Heated Multifamily Buildings, Cambridge, Massachusetts (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2014-11-01

    The ARIES Collaborative, a U.S. Department of Energy Building America research team, partnered with NeighborWorks America affiliate Homeowners' Rehab Inc. (HRI) of Cambridge, Massachusetts, to study improvements to the central hydronic heating system in one of the nonprofit's housing developments. The heating controls in the three-building, 42-unit Columbia Cambridge Alliance for Spanish Tenants housing development were upgraded. Fuel use in the development was excessive compared to similar properties. A poorly insulated thermal envelope contributed to high energy bills, but adding wall insulation was not cost-effective or practical. The more cost-effective option was improving heating system efficiency. Efficient operation of the heating system faced several obstacles, including inflexible boiler controls and failed thermostatic radiator valves. Boiler controls were replaced with systems that offer temperature setbacks and one that controls heat based on apartment temperature in addition to outdoor temperature. Utility bill analysis shows that post-retrofit weather-normalized heating energy use was reduced by 10%-31% (average of 19%). Indoor temperature cutoff reduced boiler runtime (and therefore heating fuel consumption) by 28% in the one building in which it was implemented. Nearly all savings were obtained during night which had a lower indoor temperature cut off (68 degrees F) than day (73 degrees F). This implies that the outdoor reset curve was appropriately adjusted for this building for daytime operation. Nighttime setback of heating system supply water temperature had no discernable impact on boiler runtime or gas bills.

  12. (facts) to improve the power flow control in the nigeria transmission n

    African Journals Online (AJOL)

    BARTH EKWUEME

    the magnitude of current Iq is variable; its phase angle is fixed at 90 degrees ... With phase-angle control, assuming that Iq = 0 and. Vpq = , tan tan α α ... Loops system provides alternative routes for power flow. The absence of loops accounts mainly for the weak and unreliable power system in the country. The pictorial view ...

  13. NREL Reveals Links Among Climate Control, Battery Life, and Electric Vehicle Range (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2012-06-01

    Researchers at the National Renewable Energy Laboratory (NREL) are providing new insights into the relationships between the climate-control systems of plug-in electric vehicles and the distances these vehicles can travel on a single charge. In particular, NREL research has determined that 'preconditioning' a vehicle-achieving a comfortable cabin temperature and preheating or precooling the battery while the vehicle is still plugged in-can extend its driving range and improve battery life over the long term.

  14. Snack, Facts

    Science.gov (United States)

    Smith, Suzanne M.

    2005-01-01

    The American diet has undergone substantial changes, a fact that has negatively impacted the dental health of children. Primary prevention is the ideal method to address the current increased incidence of tooth decay. Educating kids, and their parents, about the qualities of snacks as well as the role of frequency of snacking could help to reduce…

  15. Reptile Facts.

    Science.gov (United States)

    Steinheimer, Margaret

    1993-01-01

    Describes an award-winning bulletin board for introducing a unit on reptiles. This interactive bulletin board contains fun facts and counters common misconceptions about reptiles. Twelve true-false statements are hidden behind pull-up flaps. Four pictures ask students to identify the difference between often-confused animals. (PR)

  16. Danish strategies to control Campylobacter in broilers and broiler meat: facts and effects

    DEFF Research Database (Denmark)

    Rosenquist, Hanne; Boysen, Louise; Galliano, C.

    2009-01-01

    Thermotolerant Campylobacter spp. have been the most common bacterial cause of human gastrointestinal disease in Denmark since 1999. In 2003, the Danish voluntary strategy to control Campylobacter was intensified. The focus was on biosecurity, allocation of meat from Campylobacter-negative broilers...... to the production of chilled products, and consumer information campaigns. From 2002 to 2007, the percentage of Campylobacter-positive broiler flocks at slaughter decreased from 43% to 27%. After processing, Campylobacter-positive samples of chilled broiler meat fell from 18% in 2004 to 8% in 2007. Furthermore......, the number of registered human Campylobacter cases decreased by 12%; from 4379 cases in 2002 to 3865 cases in 2007. We believe that the observed decrease in the occurrence of Campylobacter in broilers and broiler meat and the coincidental fall in the number of registered human cases is, in part, a result...

  17. [Insufficient symptom control under long-term treatment with PPI in GERD - fact or fiction?].

    Science.gov (United States)

    Labenz, Joachim; Labenz, Gisela; Stephan, Dietmar; Willeke, Frank

    2016-05-25

    Randomized controlled trials show that patients with gastroesophageal reflux disease (GERD) and treatment with proton pump inhibitors (PPI) in about 30% of the cases complain about persisting reflux symptoms (heartburn, regurgitation). The aim of the study was to evaluate the efficacy of PPI long-term treatment in patients with GERD in the family doctor's office. Patients with GERD and a PPI therapy of at least one year participated in a prospective, multicenter observational study. The patients obtained a questionnaire together with a further prescription of PPI. They were asked about the intensity and frequency of heartburn, regurgitation and sleep disorders due to reflux symptoms, satisfaction with PPI therapy, diagnostics performed up to now (endoscopy, pH monitoring, manometry) and surgical consultation. The questionnaire included a validated instrument for the diagnosis of GERD (GerdQ). Patients with the diagnosis "GERD " according to the questionnaire who were very dissatisfied with their current PPI therapy (score 1 or 2 on a 5-point Likert scale) were defined as "lost patients " (LOPA). 39% of the patients still suffered from heartburn at least two days a week, 30% of regurgitation. In 22% of the patients, reflux symptoms led to sleep disorder at least two days a week. 20% of the patients were very dissatisfied with the current PPI therapy. 70% of them (= 14% of the total patient population) were "lost patients " according to the definition. An endoscopy was performed in 86% of the patients and function diagnosis (pH monitoring ± manometry) in 8%. A surgeon was consulted in 8% of the patients, a third of which had received function diagnosis before. A poor symptom control can often be found in GERD patients with PPI long-term therapy, but does not stand out in the daily routine. So diagnosis will not continue and treatment alternatives will not be searched for. In the future quality of treatment should be verified e. g. by questionnaires.

  18. The KinFact Intervention – A Randomized Controlled Trial to Increase Family Communication About Cancer History

    Science.gov (United States)

    McClish, Donna; Gyure, Maria; Corona, Rosalie; Krist, Alexander H.; Rodríguez, Vivian M.; Maibauer, Alisa M.; Borzelleca, Joseph; Bowen, Deborah J.; Quillin, John M.

    2014-01-01

    Abstract Background: Knowing family history is important for understanding cancer risk, yet communication within families is suboptimal. Providing strategies to enhance communication may be useful. Methods: Four hundred ninety women were recruited from urban, safety-net, hospital-based primary care women's health clinics. Participants were randomized to receive the KinFact intervention or the control handout on lowering risks for breast/colon cancer and screening recommendations. Cancer family history was reviewed with all participants. The 20-minute KinFact intervention, based in communication and behavior theory, included reviewing individualized breast/colon cancer risks and an interactive presentation about cancer and communication. Study outcomes included whether participants reported collecting family history, shared cancer risk information with relatives, and the frequency of communication with relatives. Data were collected at baseline, 1, 6, and 14 months. Results: Overall, intervention participants were significantly more likely to gather family cancer information at follow-up (odds ratio [OR]: 2.73; 95% confidence interval [CI]: 2.01, 3.71) and to share familial cancer information with relatives (OR: 1.85; 95% CI: 1.37, 2.48). Communication frequency (1=not at all; 4=a lot) was significantly increased at follow-up (1.67 vs. 1.54). Differences were not modified by age, race, education, or family history. However, effects were modified by pregnancy status and genetic literacy. Intervention effects for information gathering and frequency were observed for nonpregnant women but not for pregnant women. Additionally, intervention effects were observed for information gathering in women with high genetic literacy, but not in women with low genetic literacy. Conclusions: The KinFact intervention successfully promoted family communication about cancer risk. Educating women to enhance their communication skills surrounding family history may allow them to partner

  19. Active controls technology to maximize structural efficiency

    Science.gov (United States)

    Hoy, J. M.; Arnold, J. M.

    1978-01-01

    The implication of the dependence on active controls technology during the design phase of transport structures is considered. Critical loading conditions are discussed along with probable ways of alleviating these loads. Why fatigue requirements may be critical and can only be partially alleviated is explained. The significance of certain flutter suppression system criteria is examined.

  20. Technological Improvements for Digital Fire Control Systems

    Science.gov (United States)

    2017-09-30

    Final Technical Status Report For DOTC-12-01-INIT061 Technological Improvements for Digital Fire Control Systems Reporting Period: 30 Sep...Processes 100% 6 Quarterly Technical and Business Status Report 100% 7 Component design development for gun components not funded 8 Materials Dev

  1. Assessment of control technology for stationary sources. Volume II: control technology data tables. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Minicucci, D.; Herther, M.; Babb, L.; Kuby, W.

    1980-02-01

    This report, the Control Technology Data Tables, is the second volume of the three-volume final report for the contract. It presents in tabular format, qualitative descriptions of control options for the various sources and quantitative information on control technology cost, efficiency, reliability, energy consumption, other environmental impacts and application status. Also included is a code list which classifies the stationary sources examined by industry, process, and emission source.

  2. Facts about Type 2

    Medline Plus

    Full Text Available ... Forecast® magazine: lp-type-2, In this section Diabetes Basics Type 2 Facts About Type 2 Recently Diagnosed Treatment and Care Blood Glucose Control Complications Medication Doctors, ...

  3. Organ Facts: Pancreas

    Science.gov (United States)

    ... Page Transplant Living > Organ facts and surgeries > Pancreas Pancreas Beneath your ribs, you’ll find the pancreas, ... shape. Location of the pancreas How does the pancreas work? The pancreas controls your sugar levels and ...

  4. The future for weed control and technology.

    Science.gov (United States)

    Shaner, Dale L; Beckie, Hugh J

    2014-09-01

    This review is both a retrospective (what have we missed?) and prospective (where are we going?) examination of weed control and technology, particularly as it applies to herbicide-resistant weed management (RWM). Major obstacles to RWM are discussed, including lack of diversity in weed management, unwillingness of many weed researchers to conduct real integrated weed management research or growers to accept recommendations, influence or role of agrichemical marketing and governmental policy and lack of multidisciplinary research. We then look ahead to new technologies that are needed for future weed control in general and RWM in particular, in areas such as non-chemical and chemical weed management, novel herbicides, site-specific weed management, drones for monitoring large areas, wider application of 'omics' and simulation model development. Finally, we discuss implementation strategies for integrated weed management to achieve RWM, development of RWM for developing countries, a new classification of herbicides based on mode of metabolism to facilitate greater stewardship and greater global exchange of information to focus efforts on areas that maximize progress in weed control and RWM. There is little doubt that new or emerging technologies will provide novel tools for RMW in the future, but will they arrive in time? © 2013 Her Majesty the Queen in Right of Canada Pest Management Science © 2013 Society of Chemical Industry.

  5. Digital Control Technologies for Modular DC-DC Converters

    Science.gov (United States)

    Button, Robert M.; Kascak, Peter E.; Lebron-Velilla, Ramon

    2002-01-01

    Recent trends in aerospace Power Management and Distribution (PMAD) systems focus on using commercial off-the-shelf (COTS) components as standard building blocks. This move to more modular designs has been driven by a desire to reduce costs and development times, but is also due to the impressive power density and efficiency numbers achieved by today's commercial DC-DC converters. However, the PMAD designer quickly learns of the hidden "costs" of using COTS converters. The most significant cost is the required addition of external input filters to meet strict electromagnetic interference (MIAMI) requirements for space systems. In fact, the high power density numbers achieved by the commercial manufacturers are greatly due to the lack of necessary input filters included in the COTS module. The NASA Glenn Research Center is currently pursuing a digital control technology that addresses this problem with modular DC-DC converters. This paper presents the digital control technologies that have been developed to greatly reduce the input filter requirements for paralleled, modular DC-DC converters. Initial test result show that the input filter's inductor size was reduced by 75 percent, and the capacitor size was reduced by 94 percent while maintaining the same power quality specifications.

  6. Technology Roadmap Instrumentation, Control, and Human-Machine Interface to Support DOE Advanced Nuclear Energy Programs

    Energy Technology Data Exchange (ETDEWEB)

    Donald D Dudenhoeffer; Burce P Hallbert

    2007-03-01

    Instrumentation, Controls, and Human-Machine Interface (ICHMI) technologies are essential to ensuring delivery and effective operation of optimized advanced Generation IV (Gen IV) nuclear energy systems. In 1996, the Watts Bar I nuclear power plant in Tennessee was the last U.S. nuclear power plant to go on line. It was, in fact, built based on pre-1990 technology. Since this last U.S. nuclear power plant was designed, there have been major advances in the field of ICHMI systems. Computer technology employed in other industries has advanced dramatically, and computing systems are now replaced every few years as they become functionally obsolete. Functional obsolescence occurs when newer, more functional technology replaces or supersedes an existing technology, even though an existing technology may well be in working order.Although ICHMI architectures are comprised of much of the same technology, they have not been updated nearly as often in the nuclear power industry. For example, some newer Personal Digital Assistants (PDAs) or handheld computers may, in fact, have more functionality than the 1996 computer control system at the Watts Bar I plant. This illustrates the need to transition and upgrade current nuclear power plant ICHMI technologies.

  7. Divison of Environmental Control Technology program, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Mott, William E.

    1979-06-01

    This report covers Division of Environmental Control Technology projects in progress during FY 1978, within the Office of the Assistant Secretary for Environment, Department of Energy. It is the second in a planned series of annual reports. The Division of Environmental Control Technology (ECT) continues to support the Assistant Secretary for Environment (EV) in discharging two primary responsibilities: (1) under the Environmental Engineering (EE) Program, the independent overview and assessment of environmental control aspects of both the U.S. Department of Energy's (DOE) research, development, and demonstration (RD and D) programs and the Nation's energy policies, and (2) under the Decontamination and Decommissioning Program, the reduction of potential environmental hazards at the radioactively contaminated sites that are presently owned or were formerly used by the Government. This report presents a short summary of objectives, approach, progress and results, future plans, and a reference bibliography for each research, development, or assessment project within the program areas described above.

  8. Adaptive wing and flow control technology

    Science.gov (United States)

    Stanewsky, E.

    2001-10-01

    The development of the boundary layer and the interaction of the boundary layer with the outer “inviscid” flow field, exacerbated at high speed by the occurrence of shock waves, essentially determine the performance boundaries of high-speed flight. Furthermore, flight and freestream conditions may change considerably during an aircraft mission while the aircraft itself is only designed for multiple but fixed design points thus impairing overall performance. Consequently, flow and boundary layer control and adaptive wing technology may have revolutionary new benefits for take-off, landing and cruise operating conditions for many aircraft by enabling real-time effective geometry optimization relative to the flight conditions. In this paper we will consider various conventional and novel means of boundary layer and flow control applied to moderate-to-large aspect ratio wings, delta wings and bodies with the specific objectives of drag reduction, lift enhancement, separation suppression and the improvement of air-vehicle control effectiveness. In addition, adaptive wing concepts of varying complexity and corresponding aerodynamic performance gains will be discussed, also giving some examples of possible structural realizations. Furthermore, penalties associated with the implementation of control and adaptation mechanisms into actual aircraft will be addressed. Note that the present contribution is rather application oriented.

  9. Control technology in supply systems. Regelungstechnik in der Versorgungstechnik

    Energy Technology Data Exchange (ETDEWEB)

    Bach, H.; Baumgarth, S.; Forsch, K.; Reeker, J.; Krinninger, H.; Ruosch, E.; Schaefer, A.; Schiele, J.; Schroeder, H.; Treusch, W.

    1983-01-01

    The textbook presents the theoretical fundamentals and practical examples of control technology in supply systems. Practical examples of the fields of heating, air conditioning, and gas supply are presented in detail. The book comprises the following chapters: 1. Introduction to control technology; 2. steady state and time behaviour of control loop elements; 3. controlled systems; 4. control equipment; 5. control elements; 6. closed loops; 7. preset control; 8. meshed control loops; 9. digital control technology; 10. central control systems for supply systems of buildings; 11. examples of supply systems control.

  10. Blood Facts and Statistics

    Science.gov (United States)

    ... Blood > Blood Facts and Statistics Blood Facts and Statistics Facts about blood needs Facts about the blood ... to Top Learn About Blood Blood Facts and Statistics Blood Components Whole Blood and Red Blood Cells ...

  11. BPA Facts

    Energy Technology Data Exchange (ETDEWEB)

    None

    2014-03-01

    The Bonneville Power Administration is a federal nonprofit power marketing administration based in the Pacific Northwest . Although BPA is part of the U .S . Department of Energy, it is self-funding and covers its costs by selling its products and services . BPA markets wholesale electrical power from 31 federal hydro projects in the Columbia River Basin, one nonfederal nuclear plant and several small nonfederal power plants . The dams are operated by the U .S . Army Corps of Engineers and the Bureau of Reclamation . About 30 percent of the electric power used in the Northwest comes from BPA . BPA’s resources — primarily hydroelectric — make its power nearly carbon free . BPA also operates and maintains about three- fourths of the high-voltage transmission in its service territory . BPA’s service territory includes Idaho, Oregon, Washington, western Montana and small parts of eastern Montana, California, Nevada, Utah and Wyoming . BPA promotes energy efficiency, renewable resources and new technologies that improve its ability to deliver on its mission . BPA also funds regional efforts to protect and enhance fish and wildlife populations affected by hydropower development in the Columbia River Basin . BPA is committed to public service and seeks to make its decisions in a manner that provides opportunities for input from stakeholders . In its vision statement, BPA dedicates itself to providing high system reliability, low rates consistent with sound business principles, environmental stewardship and accountability

  12. Wireless communication technology for modular mechatronic controllers

    CSIR Research Space (South Africa)

    Bright, G

    2010-08-01

    Full Text Available to modular architecture. Communication technology allows for the systematic integration of mechatronics sub-systems in order to achieve complex integrated mechatronics system which would be difficult to achieve without the use of information technology (IT...

  13. Division of Environmental Control Technology program, 1977

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-06-01

    Environmental engineering programs are reviewed for the following technologies; coal; petroleum and gas; oil shale; solar; geothermal and energy conservation; nuclear energy; and decontamination and decommissioning. Separate abstracts were prepared for each technology. (MHR)

  14. 40 CFR 725.422 - Physical containment and control technologies.

    Science.gov (United States)

    2010-07-01

    ... technologies. 725.422 Section 725.422 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Exemptions for New Microorganisms § 725.422 Physical containment and control technologies. The manufacturer must meet all of the following criteria for physical containment and control technologies for any...

  15. Recent developments in radiation field control technology

    Energy Technology Data Exchange (ETDEWEB)

    Wood, C.J. [Electric Power Research Institute, Palo Alto, CA (United States)

    1995-03-01

    The U.S. nuclear power industry has been remarkably successful in reducing worker radiation exposures over the past ten years. There has been over a fourfold reduction in the person-rem incurred for each MW.year of electric power generated: from 1.8 in 1980, to only 0.39 person-rems in 1991 and 1992. Preliminary data for 1993 are even lower: approximately 0.37 person-rem.MW.year. Despite this substantial improvement, challenges for the industry remain. Individual exposure limits have been tightened in ICRP 60 and there will be increased requirements for special maintenance work as plants age, suggesting that vigorous efforts with be increased requirements for special maintenance work as plants age, suggesting that vigorous efforts will be required to meet the industry goals for 1995. Reducing out-of-core radiation fields offer the best chance of continuing the downward trend in exposures. To assist utilities select the most economic technology for their specific plants, EPRI has published a manual capturing worldwide operating experience with radiation-field control techniques (TR-100265). No one method will suffice, but implementing suitable combinations from this collection will enable utilities to achieve their exposure goals. Radiation reduction is generally cost-effective: outages are shorter, manpower requirements are reduced and work quality is improved. Despite the up front costs, the benefits over the following 1-3 years typically outweigh the expenses.

  16. Controlling electron energy distributions for plasma technologies

    Science.gov (United States)

    Kushner, Mark

    2009-10-01

    The basic function of low temperature plasmas in society benefiting technologies is to channel power into specific modes of atoms and molecules to excite desired states or produce specified radicals. This functionality ultimately depends on the ability to craft an electron energy distribution (EED) to match cross sections. Given electric fields, frequencies, gas mixtures and pressures, predicting EEDs and excitation rates can in large part be reliably done. The inverse problem, specifying the conditions that produce a given EED, is less well understood. Early strategies to craft EEDs include adjusting gas mixtures, such as the rare gas-Hg mixtures in fluorescent lamps, and externally sustained discharges, such as electron-beam sustained plasmas for molecular lasers. More recent strategies include spiker-sustainer circuitry which produces desired EEDs in non-self-sustained plasmas; and adjusting frequency in capacitively coupled plasmas. In this talk, past strategies for customizing EEDs in low pressure plasmas will be reviewed and prospects for improved control of plasma kinetics will be discussed using results from 2-dimensional computer models.

  17. Photovoltaics Fact Sheet

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-02-01

    This fact sheet is an overview of the Photovoltaics (PV) subprogram at the U.S. Department of Energy SunShot Initiative. The U.S. Department of Energy (DOE)’s Solar Energy Technologies Office works with industry, academia, national laboratories, and other government agencies to advance solar PV, which is the direct conversion of sunlight into electricity by a semiconductor, in support of the goals of the SunShot Initiative. SunShot supports research and development to aggressively advance PV technology by improving efficiency and reliability and lowering manufacturing costs. SunShot’s PV portfolio spans work from early-stage solar cell research through technology commercialization, including work on materials, processes, and device structure and characterization techniques.

  18. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, NOX CONTROL TECHNOLOGIES, CATALYTICA COMBUSTION SYSTEMS, INC., XONON FLAMELESS COMBUSTION SYSTEM

    Science.gov (United States)

    The Environmental Technology Verification report discusses the technology and performance of the Xonon Cool Combustion System manufactured by Catalytica Energy Systems, Inc., formerly Catalytica Combustion Systems, Inc., to control NOx emissions from gas turbines that operate wit...

  19. New, system-oriented FACTS elements; Neue systemorientierte FACTS-Elemente

    Energy Technology Data Exchange (ETDEWEB)

    Westermann, D.

    2000-07-01

    This final report for the Swiss Federal Office of Energy (SFOE) discusses a project concerning the development of Flexible A.C. Transmission Systems (FACTS) devices that are optimised with respect to their economic viability. Devices such as the Unified Power Flow Controller (UPFC) and transformer-less Advanced Series Compensation (ACS) units are used as reference devices. The report discusses the combining of existing concepts and modern power electronics technology to realise savings in FACTS applications in high, medium and low-voltage grids. The report mentions that - apart from the development of basic system planning and specifications - the project also looked at economic efficiency factors of the devices.

  20. Alternative control technologies: Technologies de contrôle non conventionnelles

    National Research Council Canada - National Science Library

    Hudgins, Bernard

    1998-01-01

    .... Through different chapters, the various human factors issues related to the introduction of alternative control technologies into military cockpits are reviewed, in conjunction with more technical...

  1. Advanced Instrumentation, Information, and Control Systems Technologies Technical Program Plan

    Energy Technology Data Exchange (ETDEWEB)

    Bruce Hallbert

    2012-09-01

    Reliable instrumentation, information, and control (II&C) systems technologies are essential to ensuring safe and efficient operation of the U.S. light water reactor (LWR) fleet. These technologies affect every aspect of nuclear power plant (NPP) and balance-of-plant operations. In 1997, the National Research Council conducted a study concerning the challenges involved in modernization of digital instrumentation and control systems in NPPs. Their findings identified the need for new II&C technology integration.

  2. Zika Virus Fact Sheet

    Science.gov (United States)

    ... Fact files Questions & answers Features Multimedia Contacts Zika virus Fact sheet Updated 6 September 2016 Key facts ... last for 2-7 days. Complications of Zika virus disease Based on a systematic review of the ...

  3. Organ Facts: Kidney / Pancreas

    Science.gov (United States)

    ... Your Child Adjust Camps Resources LIVING DONATION Facts Types Being a Living Donor About the Operation Financing Living Donation Home / Before The Transplant / Organ Facts / Kidney/Pancreas Organ Facts Heart Lung Heart/ ...

  4. Oral Cancer Facts

    Science.gov (United States)

    ... Events Get involved Dental Research Resources Contact Sitemap Oral Cancer Facts Home » Oral Cancer Facts Oral Cancer Facts ... needed on the Check Your Mouth website. How oral cancer develops We know that all cancers (neoplastic transformations) ...

  5. Zika Virus Fact Sheet

    Science.gov (United States)

    ... sheets Fact files Questions & answers Features Multimedia Contacts Zika virus Fact sheet Updated 6 September 2016 Key facts ... and last for 2-7 days. Complications of Zika virus disease Based on a systematic review of the ...

  6. The aircraft energy efficiency active controls technology program

    Science.gov (United States)

    Hood, R. V., Jr.

    1977-01-01

    Broad outlines of the NASA Aircraft Energy Efficiency Program for expediting the application of active controls technology to civil transport aircraft are presented. Advances in propulsion and airframe technology to cut down on fuel consumption and fuel costs, a program for an energy-efficient transport, and integrated analysis and design technology in aerodynamics, structures, and active controls are envisaged. Fault-tolerant computer systems and fault-tolerant flight control system architectures are under study. Contracts with leading manufacturers for research and development work on wing-tip extensions and winglets for the B-747, a wing load alleviation system, elastic mode suppression, maneuver-load control, and gust alleviation are mentioned.

  7. Survey of multi-function display and control technology

    Science.gov (United States)

    Spiger, R. J.; Farrell, R. J.; Tonkin, M. H.

    1982-01-01

    The NASA orbiter spacecraft incorporates a complex array of systems, displays and controls. The incorporation of discrete dedicated controls into a multi-function display and control system (MFDCS) offers the potential for savings in weight, power, panel space and crew training time. The technology applicable to the development of a MFDCS for orbiter application is surveyed. Technology thought to be applicable presently or in the next five years is highlighted. Areas discussed include display media, data handling and processing, controls and operator interactions and the human factors considerations which are involved in a MFDCS design. Several examples of applicable MFDCS technology are described.

  8. Industrial Stormwater Fact Sheet Series

    Science.gov (United States)

    Fact sheets for the industrial sectors regulated by the MSGP. Each describes the types of facilities included in the sector, typical pollutants associated with the sector, and types of stormwater control measures used to minimize pollutant discharge.

  9. Controlling technology costs as integrated networks expand.

    Science.gov (United States)

    Halverson, K

    1995-01-01

    The expansion of integrated healthcare networks is changing the way radiology technology should be acquired and maintained. Some significant effects are that utilization will decline with managed care; the radiology department is now a cost center, not a source of revenue; and integrated networks find themselves with redundant technology and excess radiology equipment. While hospitals shoulder additional financial risk associated with managed care, responsibility for finding solutions to new problems falls to the radiology administrator. Administrators can take the following steps to effectively reduce expense and risk: Understand current usage. Eliminate redundancies. Prioritize modalities. Find new financing opportunities. Lease equipment. Purchase reconditioned equipment. Redeploy assets instead of buying new. Radiology administrators who view these problems as a challenging puzzle will naturally explore creative options. They will provide the greatest flexibility and best position for their department's contributions to the hospital's overall strategic goals.

  10. Locus of Control and Technology Adoption in Developing Country Agriculture

    DEFF Research Database (Denmark)

    Abay, Kibrom Araya; Blalock, Garrick; Berhane, Guush

    2017-01-01

    adoption decisions, including use of chemical fertilizers, improved seeds, and irrigation. We show that individuals with an internal locus of control have higher propensity of adopting agricultural technologies. We observe these empirical regularities in both datasets, and for both revealed measures......We investigate the implication of farmers’ locus of control on their technology adoption decisions. Our empirical analysis is based on two longitudinal surveys and hypothetical choice exercises conducted on Ethiopian farmers. We find that locus of control significantly predicts farmers’ technology...... of farmers’ technology adoption decisions as well as farmers’ hypothetical demand for agricultural technology. The results hold even in a more conservative fixed effects estimation approach, assuming locus of control as time-variant and dynamic behavioral trait. These findings provide behavioral...

  11. Noise-control needs in the developing energy technologies

    Energy Technology Data Exchange (ETDEWEB)

    Keast, D.N.

    1978-03-01

    The noise characteristics of existing energy conversion technologies, e.g., from obtaining and processing fossil fuels to power plants operations, and of developing energy technologies (wind, geothermal sources, solar energy or fusion systems) are discussed in terms of the effects of noise on humans, animals, structures, and equipment and methods for noise control. Regulations for noise control are described. Recommendations are made for further research on noise control and noise effects. (LCL)

  12. Damage Control Technology - A Literature Review

    Science.gov (United States)

    2006-03-01

    achieved. Options for smoke control on board ships have been reviewed126. Two series of tests127-128 have been completed that address the incorporation... Smoke Control Onboard Ships”, NRL Memorandum Report NRL/MR/6180--02-8612 of March 25, 2002. 127. Yadon, J.T., Havlovick, B.J., Farley, J.P. and Williams

  13. LNG fire and vapor control system technologies

    Energy Technology Data Exchange (ETDEWEB)

    Konzek, G.J.; Yasutake, K.M.; Franklin, A.L.

    1982-06-01

    This report provides a review of fire and vapor control practices used in the liquefied natural gas (LNG) industry. Specific objectives of this effort were to summarize the state-of-the-art of LNG fire and vapor control; define representative LNG facilities and their associated fire and vapor control systems; and develop an approach for a quantitative effectiveness evaluation of LNG fire and vapor control systems. In this report a brief summary of LNG physical properties is given. This is followed by a discussion of basic fire and vapor control design philosophy and detailed reviews of fire and vapor control practices. The operating characteristics and typical applications and application limitations of leak detectors, fire detectors, dikes, coatings, closed circuit television, communication systems, dry chemicals, water, high expansion foam, carbon dioxide and halogenated hydrocarbons are described. Summary descriptions of a representative LNG peakshaving facility and import terminal are included in this report together with typical fire and vapor control systems and their locations in these types of facilities. This state-of-the-art review identifies large differences in the application of fire and vapor control systems throughout the LNG industry.

  14. MFDC - technological improvement in resistance welding controls

    Energy Technology Data Exchange (ETDEWEB)

    Somani, A.K.; Naga Bhaskar, V.; Chandramouli, J.; Rameshwara Rao, A. [Nuclear Fuel Complex, Dept. of Atomic Energy, Hyderabad (India)

    2008-07-01

    Among the various Resistance Welding operations carried out in the production line of a fuel bundle end plug welding is the most critical operation. Welding controllers play a very vital role in obtaining consistent weld quality by regulating and controlling the weld current. Conventional mains synchronized welding controllers are at best capable of controlling the weld current at a maximum speed of the mains frequency. In view of the very short welding durations involved in the various stages of a fuel bundle fabrication, a need was felt for superior welding controllers. Medium Frequency Welding Controllers offer a solution to these limitations in addition to offering other advantages. Medium Frequency power sources offer precise welding current control as they regulate and correct the welding current faster, typically twenty times faster when operated at 1000Hz. An MFDC was employed on one of the welding machines and its performance was studied. This paper discusses about the various advantages of MFDCs with other controllers employed at NFC to end plug welding operation. (author)

  15. Hazards Control Department annual technology review, 1987

    Energy Technology Data Exchange (ETDEWEB)

    Griffith, R.V.; Anderson, K.J. (eds.)

    1988-07-01

    This document describes some of the research performed in the LLNL Hazards Control Department from October 1986 to September 1987. The sections in the Annual report cover scientific concerns in the areas of Health Physics, Industrial Hygiene, Industrial Safety, Aerosol Science, Resource Management, Dosimetry and Radiation Physics, Criticality Safety, and Fire Science. For a broader overview of the types of work performed in the Hazards Control Department, we have also compiled a selection of abstracts of recent publications by Hazards Control employees. Individual reports are processed separately for the data base.

  16. Insulation fact sheet

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-08-01

    Electricity bills, oil bills, gas bills - all homeowners pay for one or more of these utilities, and wish they paid less. Often many of us do not really know how to control or reduce our utility bills. We resign ourselves to high bills because we think that is the price we have to pay for a comfortable home. We encourage our children to turn off the lights and appliances, but may not recognize the benefits of insulating the attic. This publication provides facts relative to home insulation. It discusses where to insulate, what products to use, the decision making process, installation options, and sources of additional information.

  17. [A new program-controlled telemetry technology for pacemakers].

    Science.gov (United States)

    Wang, Yu; Huang, Xin-ming; Fang, Zu-xinag

    2002-09-01

    This thesis is about a new technology of program-controlled telemetry for pacemakers. The system utilizes digital logic circuit design, and the program-controlled part uses single chip to control for display and debug. PWM and reflectance telemetry may improve the preciseness and correctness of signal transmission, and reduce the power consumption of pacemakers and prolong the lifetime.

  18. Economics of selected water control technologies and their ...

    African Journals Online (AJOL)

    Marginal value products of farm inputs are found to be positive but their magnitudes differ by type of control structures, crop type, agro-ecology and regions. The net present values of all water control structures are positive. There is a favorable precondition for sustainable adoption of these controls technologies and ...

  19. Elastic optical networks architectures, technologies, and control

    CERN Document Server

    Velasco, Luis

    2016-01-01

    This book addresses challenges and potential solutions surrounding the dramatic yearly increases in bandwidth demand. The editors discuss the predicament surrounding current growth, which is predicted to continue because of the proliferation of disruptive, high bandwidth applications like video and cloud applications. They also discuss that in addition to growth, traffic will become much more dynamic, both in time and direction. The contributors show how large changes in traffic magnitude during a 24-hour period can be observed, as day-time business users have very different demands to evening-time residential customers, and how this plays into addressing future challenges. In addition, they discuss potential solutions for the issues surrounding situations where multiple content and cloud service providers offer competing services, causing the traffic direction to become more dynamic. The contributors discuss that although the WDM transponder technology can be upgraded to 100Gb/s in the short to medium term, ...

  20. Target-Controlled Infusion : A Mature Technology

    NARCIS (Netherlands)

    Absalom, Anthony R.; Glen, John (Iain) B.; Zwart, Gerrit J. C.; Schnider, Thomas W.; Struys, Michel M. R. F.

    Target-controlled infusions (TCIs) have been used in research and clinical practice for >2 decades. Nonapproved TCI software systems have been used during the conduct of almost 600 peer-reviewed published studies involving large numbers of patients. The first-generation pumps were first approved in

  1. Systematic approach to balanced control technology management

    Directory of Open Access Journals (Sweden)

    I. N. Vorobjev

    2012-01-01

    Full Text Available Articulated understanding of important systemic controls that exist in the modern world. Identify and describe the key success factors of a balanced management of organizational change. Proposed register of compliance balanced scorecard target values and objectives of balanced management of industrial organizations.

  2. Numerical simulation of intelligent compaction technology for construction quality control.

    Science.gov (United States)

    2014-12-01

    Intelligent compaction (IC) technique is a fast-developing technology for compaction quality control and acceptance. Proof rolling using the intelligent compaction rollers after completing compaction can eectively identify : the weak spots and sig...

  3. Ethylene Production Maximum Achievable Control Technology (MACT) Compliance Manual

    Science.gov (United States)

    This July 2006 document is intended to help owners and operators of ethylene processes understand and comply with EPA's maximum achievable control technology standards promulgated on July 12, 2002, as amended on April 13, 2005 and April 20, 2006.

  4. APPLICATION OF MODEM INFORMATION TECHNOLOGIES IN THE ENTERPRISE CONTROL

    Directory of Open Access Journals (Sweden)

    A. E. Nikiforov

    2007-01-01

    Full Text Available The modern technologies of the enterprise control help to make the process of taking decisions more correct and reasonable, promote better understanding of real situations and appropriate response to them.

  5. Technological measures for controlling the use of copyrighted works of authorship in the information society

    Directory of Open Access Journals (Sweden)

    Spasić Vidoje

    2016-01-01

    of protection, which mostly stem from the fact that sanctions for evasion of technological measures call into question the ultimate purpose of copyright law in general. Yet, the regulation of technological protection measures must be approached with great caution. Envisaging relevant legal protection for these measures should contribute to providing a comprehensive and stable system of copyright protection. Moreover, it is essential to ascertain the necessary balance of interest of all relevant subjects involved in that process. Technological measures for controlling the use of copyrighted works of authorship should primarily protect the authors' rights and interests; however, they certainly must encompass the legal and legitimate interests of the end-users as well as the general public, particularly considering the statutory limitations to authorship rights in favour of third parties.

  6. Applications of aerospace technology in industry, a technology transfer profile: Contamination control

    Science.gov (United States)

    1971-01-01

    The strong influence NASA-sponsored research has had on the development of solutions to difficult contamination problems is considered. The contamination control field is comprised of an industrial base, supplying the tools of control; a user base, adopting control techniques; and a technical base, expanding the concepts of control. Both formal and informal mechanisms used by NASA to communicate a variety of technical advances are reviewed and certain examples of the expansion of the user base through technology transfer are given. Issues related to transfer of NASA-generated contamination control technology are emphasized.

  7. International Conference on Systems, Control and Information Technologies 2016

    CERN Document Server

    Kaliczyńska, Małgorzata

    2017-01-01

    This book presents the proceedings of the International Conference on Systems, Control and Information Technologies 2016. It includes research findings from leading experts in the fields connected with INDUSTRY 4.0 and its implementation, especially: intelligent systems, advanced control, information technologies, industrial automation, robotics, intelligent sensors, metrology and new materials. Each chapter offers an analysis of a specific technical problem followed by a numerical analysis and simulation as well as the implementation for the solution of a real-world problem.

  8. Review of fluid and control technology of hydraulic wind turbines

    Science.gov (United States)

    Cai, Maolin; Wang, Yixuan; Jiao, Zongxia; Shi, Yan

    2017-09-01

    This study examines the development of the fluid and control technology of hydraulic wind turbines. The current state of hydraulic wind turbines as a new technology is described, and its basic fluid model and typical control method are expounded by comparing various study results. Finally, the advantages of hydraulic wind turbines are enumerated. Hydraulic wind turbines are expected to become the main development direction of wind turbines.

  9. Siemens: Smart Technologies for Large Control Systems

    CERN Multimedia

    CERN. Geneva; BAKANY, Elisabeth

    2015-01-01

    The CERN Large Hadron Collider (LHC) is known to be one of the most complex scientific machines ever built by mankind. Its correct functioning relies on the integration of a multitude of interdependent industrial control systems, which provide different and essential services to run and protect the accelerators and experiments. These systems have to deal with several millions of data points (e.g. sensors, actuators, configuration parameters, etc…) which need to be acquired, processed, archived and analysed. Since more than 20 years, CERN and Siemens have developed a strong collaboration to deal with the challenges for these large systems. The presentation will cover the current work on the SCADA (Supervisory Control and Data Acquisition) systems and Data Analytics Frameworks.

  10. A Survey of Aircraft Integrated Control Technology.

    Science.gov (United States)

    1987-09-01

    Airlines, Library Qantas Airways Limited Ansett Airlines of Australia, Library Hawker de Havilland Aust Pty Ltd, Victoria, Library Hawker de Havilland Aust...inherent control performance limitations imposed by the nature of the physical plant, and 4) lack of attention to the effects of uncertainty in the...Its disadvantages are a limited resolution in both range and angle and glint. It has good long range capability and is adaptable to detection of moving

  11. Technology research for digital flight control

    Science.gov (United States)

    Carestia, R. A.

    1983-01-01

    The use of advanced digital systems for flight control and guidance for a specific mission is investigated. The research areas include advanced electronic system architectures, tests with the global positioning system (GPS) in a helicopter, and advanced integrated systems concept for rotorcraft. Emphasis is on a search and rescue mission, differential global positioning systems to provide a data base of performance information for navigation, and a study to determine the present usage and trends of microcomputers and microcomputer components in the avionics industries.

  12. Gun control : military technology aids production

    Energy Technology Data Exchange (ETDEWEB)

    Harrison, L.

    2007-09-15

    The GasGun is a radial fracturing technology based on propellants used in large-bore guns during the Second World War. The patented GasGun is a military-grade propellant that is compatible with pen and cased hole completions. The device consists of perforated progressive-burning grains. The gun generates high-pressure gas at rates fast enough to create multiple fractures radiating between 10 to 50 feet from the wellbore. The device is conveyed to the formation in a high-strength, hollow steel carrier under a fluid column of between 300 to 8000 feet. A minimum 100 metre cushion of fluid is then placed above the gun. Gas exits the carrier and goes into the wellbore where it enters all perforating tunnels and creates radial fractures. Operators who have used the gun claim that it is both easy to use and cost-effective. It was concluded that the gun can offer significant savings when compared with traditional hydraulic fracturing treatments. 2 figs.

  13. Development of Plant Control Diagnosis Technology and Increasing Its Applications

    Science.gov (United States)

    Kugemoto, Hidekazu; Yoshimura, Satoshi; Hashizume, Satoru; Kageyama, Takashi; Yamamoto, Toru

    A plant control diagnosis technology was developed to improve the performance of plant-wide control and maintain high productivity of plants. The control performance diagnosis system containing this technology picks out the poor performance loop, analyzes the cause, and outputs the result on the Web page. Meanwhile, the PID tuning tool is used to tune extracted loops from the control performance diagnosis system. It has an advantage of tuning safely without process changes. These systems are powerful tools to do Kaizen (continuous improvement efforts) step by step, coordinating with the operator. This paper describes a practical technique regarding the diagnosis system and its industrial applications.

  14. Automatic process control in anaerobic digestion technology: A critical review.

    Science.gov (United States)

    Nguyen, Duc; Gadhamshetty, Venkataramana; Nitayavardhana, Saoharit; Khanal, Samir Kumar

    2015-10-01

    Anaerobic digestion (AD) is a mature technology that relies upon a synergistic effort of a diverse group of microbial communities for metabolizing diverse organic substrates. However, AD is highly sensitive to process disturbances, and thus it is advantageous to use online monitoring and process control techniques to efficiently operate AD process. A range of electrochemical, chromatographic and spectroscopic devices can be deployed for on-line monitoring and control of the AD process. While complexity of the control strategy ranges from a feedback control to advanced control systems, there are some debates on implementation of advanced instrumentations or advanced control strategies. Centralized AD plants could be the answer for the applications of progressive automatic control field. This article provides a critical overview of the available automatic control technologies that can be implemented in AD processes at different scales. Copyright © 2015 Elsevier Ltd. All rights reserved.

  15. NOVEL TECHNOLOGIES FOR GASEOUS CONTAMINANTS CONTROL

    Energy Technology Data Exchange (ETDEWEB)

    B.S. Turk; T. Merkel; A. Lopez-Ortiz; R.P. Gupta; J.W. Portzer; G.N. Krishnan; B.D. Freeman; G.K. Fleming

    2001-09-30

    The overall objective of this project is to develop technologies for cleaning/conditioning the syngas from an integrated gasification combined cycle (IGCC) system to meet the tolerance limits for contaminants such as H{sub 2}S, COS, NH{sub 3}, HCN, HCl, and alkali for fuel cell and chemical production applications. RTI's approach is to develop a modular system that (1) removes reduced sulfur species to sub-ppm levels using a hybrid process consisting of a polymer membrane and a regenerable ZnO-coated monolith or a mixed metal oxide sorbent; (2) removes hydrogen chloride vapors to sub-ppm levels using an inexpensive, high-surface area material; and (3) removes NH{sub 3} with acidic adsorbents. RTI is working with MEDAL, Inc., and North Carolina State University (NCSU) to develop polymer membrane technology for bulk removal of H{sub 2}S from syngas. These membranes are being engineered to remove the acid gas components (H{sub 2}S, CO{sub 2}, NH{sub 3}, and H{sub 2}O) from syngas by focusing on the ''solubility selectivity'' of the novel polymer compositions. The desirable components of the syngas (H{sub 2} and CO) are maintained at high-pressure conditions as a non-permeate stream while the impurities are transported across the membrane to the low pressure side. RTI tested commercially available and novel materials from MEDAL using a high-temperature, high-pressure (HTHP) permeation apparatus. H{sub 2}S/H{sub 2} selectivities >30 were achieved, although there was a strong negative dependence with temperature. MEDAL believes that all the polymer compositions tested so far can be prepared as hollow fiber membrane modules using the existing manufacturing technology. For fuel cell and chemical applications, additional sulfur removal (beyond that achievable with the membranes) is required. To overcome limitations of conventional ZnO pellets, RTI is testing a monolith with a thin coating of high surface area zinc-oxide based materials

  16. Integrated Tools for Future Distributed Engine Control Technologies

    Science.gov (United States)

    Culley, Dennis; Thomas, Randy; Saus, Joseph

    2013-01-01

    Turbine engines are highly complex mechanical systems that are becoming increasingly dependent on control technologies to achieve system performance and safety metrics. However, the contribution of controls to these measurable system objectives is difficult to quantify due to a lack of tools capable of informing the decision makers. This shortcoming hinders technology insertion in the engine design process. NASA Glenn Research Center is developing a Hardware-inthe- Loop (HIL) platform and analysis tool set that will serve as a focal point for new control technologies, especially those related to the hardware development and integration of distributed engine control. The HIL platform is intended to enable rapid and detailed evaluation of new engine control applications, from conceptual design through hardware development, in order to quantify their impact on engine systems. This paper discusses the complex interactions of the control system, within the context of the larger engine system, and how new control technologies are changing that paradigm. The conceptual design of the new HIL platform is then described as a primary tool to address those interactions and how it will help feed the insertion of new technologies into future engine systems.

  17. Control at a distance as self-control: the renewal of the myth of control through technology

    OpenAIRE

    Dambrin, Claire

    2007-01-01

    This paper draws on socio-institutional research on accounting technology. It underlines the ability of one type of accounting technology (performance measurement technology) to be a base for control at a distance since this technology links together discourse and calculation.

  18. New technologies and powers of control of workers for the employer in Spain

    Directory of Open Access Journals (Sweden)

    José Antonio Fernández Avilés

    2016-06-01

    Full Text Available The new information and communication technologies launch new challenges for the protection of fundamental rights in labour relations. Their use in fact allows new intense and pervasive forms of control and supervision of worker activities hitherto unthinkable.This study analyses the situation of Spanish law, both in the light of the technique of the balancing of fundamental rights using the proportionality test, used by legal theory and by the Constitutional Tribunal, and through the analysis of settled case law on the most common methods of remote control of workers (control of electronic mail, installation of video surveillance systems, geolocalization. The conclusion is that, in the absence of more specific legislative development, the assessment criteria are likely to be overly general and conditioned by a case law investigation that produces different solutions according to the specific nature of the actual case.

  19. Homosexuality: Facts for Teens

    Science.gov (United States)

    ... About Virginity Home Family Health Kids and Teens Homosexuality: Facts for Teens Homosexuality: Facts for Teens Share Print What is sexuality? ... no wrong type of orientation.You may be homosexual if you are attracted to people of the ...

  20. Facts About Usher Syndrome

    Science.gov (United States)

    ... Usher Syndrome > Facts About Usher Syndrome Facts About Usher Syndrome This information was developed by the National Eye ... is the best person to answer specific questions. Usher Syndrome Defined What is Usher syndrome? Usher syndrome is ...

  1. Marijuana: Facts for Teens

    Science.gov (United States)

    ... Publications » Marijuana: Facts for Teens » Letter to Teens Marijuana: Facts for Teens Email Facebook Twitter Letter to ... they once were. Did you know that teen marijuana use has dropped dramatically since the late 1990s? ...

  2. Cocaine (Coke, Crack) Facts

    Science.gov (United States)

    ... That People Abuse » Cocaine (Coke, Crack) Facts Cocaine (Coke, Crack) Facts Listen Cocaine is a white ... Version Download "My life was built around getting cocaine and getting high." ©istock.com/ Marjot Stacey is ...

  3. Chlamydia - CDC Fact Sheet

    Science.gov (United States)

    ... Archive STDs Home Page Bacterial Vaginosis (BV) Chlamydia Gonorrhea Genital Herpes Hepatitis HIV/AIDS & STDs Human Papillomavirus ( ... sheet Pelvic Inflammatory Disease (PID) – CDC fact sheet Gonorrhea – CDC fact sheet STDs Home Page Bacterial Vaginosis ( ...

  4. Meningitis Myths and Facts

    Science.gov (United States)

    ... May 2014) 14 Adult Vaccine-Preventable Diseases Infographic Meningitis Myths and Facts Myth: Meningococcal disease is easy ... infected person, such as shaking hands. Fact: Meningococcal meningitis is spread through air droplets and direct contact ...

  5. Facts about Type 2

    Medline Plus

    Full Text Available ... Text Size: A A A Listen En Español Facts About Type 2 Type 2 diabetes is the ... 2, In this section Diabetes Basics Type 2 Facts About Type 2 Recently Diagnosed Treatment and Care ...

  6. Facts about Presbyopia

    Science.gov (United States)

    ... Information > Refractive Errors > Facts About Presbyopia Facts About Presbyopia This information was developed by the National Eye ... is the best person to answer specific questions. Presbyopia Defined What is presbyopia? Presbyopia is a common ...

  7. Vehicle Technologies’ Fact of the Week 2013

    Energy Technology Data Exchange (ETDEWEB)

    Davis, Stacy Cagle [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Diegel, Susan W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Moore, Sheila A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Boundy, Robert Gary [Roltek, Inc., Clinton, TN (United States)

    2014-04-01

    Each week the U.S. Department of Energy’s Vehicle Technology Office (VTO) posts a Fact of the Week on their website: http://www1.eere.energy.gov/vehiclesandfuels/ . These Facts provide statistical information, usually in the form of charts and tables, on vehicle sales, fuel economy, gasoline prices, and other transportation-related trends. Each Fact is a stand-alone page that includes a graph, text explaining the significance of the data, the supporting information on which the graph was based, and the source of the data. A link to the current week’s Fact is available on the VTO homepage, but older Facts are archived and still available at: http://www1.eere.energy.gov/vehiclesandfuels/facts/. This report is a compilation of the Facts that were posted during calendar year 2013. The Facts were written and prepared by staff in Oak Ridge National Laboratory's Center for Transportation Analysis.

  8. The impact of new technologies on shipboard command and control

    OpenAIRE

    Oats, Trey D.; Erickson, Matthew C.

    2003-01-01

    Approved for public release, distribution is unlimited An investigation of how fuel cells, an integrated power system, and directed energy weapons will affect the shipboard command and control process. The focus is on the implementation of the new technologies onboard near-term and far-term destroyer variants and the resulting changes to the command and control process. Ensign, United States Naval Reserve

  9. Distributed automatic control of technological processes in conditions of weightlessness

    Science.gov (United States)

    Kukhtenko, A. I.; Merkulov, V. I.; Samoylenko, Y. I.; Ladikov-Royev, Y. P.

    1986-01-01

    Some problems associated with the automatic control of liquid metal and plasma systems under conditions of weightlessness are examined, with particular reference to the problem of stability of liquid equilibrium configurations. The theoretical fundamentals of automatic control of processes in electrically conducting continuous media are outlined, and means of using electromagnetic fields for simulating technological processes in a space environment are discussed.

  10. Pseudoscience in Instructional Technology: The Case of Learner Control Research.

    Science.gov (United States)

    Reeves, Thomas C.

    Scientific research that is conducted without the structure of a supporting scientific paradigm should be labeled pseudoscience in that such research is deceptive or false science. It is argued that much of the research in educational technology is pseudoscience, with the focus on learner control research. Learner control is the design feature of…

  11. Advances in control system technology for aerospace applications

    CERN Document Server

    2016-01-01

    This book is devoted to Control System Technology applied to aerospace and covers the four disciplines Cognitive Engineering, Computer Science, Operations Research, and Servo-Mechanisms. This edited book follows a workshop held at the Georgia Institute of Technology in June 2012, where the today's most important aerospace challenges, including aerospace autonomy, safety-critical embedded software engineering, and modern air transportation were discussed over the course of two days of intense interactions among leading aerospace engineers and scientists. Its content provide a snapshot of today's aerospace control research and its future, including Autonomy in space applications, Control in space applications, Autonomy in aeronautical applications, Air transportation, and Safety-critical software engineering.

  12. INL Control System Situational Awareness Technology Annual Report 2012

    Energy Technology Data Exchange (ETDEWEB)

    Gordon Rueff; Bryce Wheeler; Todd Vollmer; Tim McJunkin; Robert Erbes

    2012-10-01

    The overall goal of this project is to develop an interoperable set of tools to provide a comprehensive, consistent implementation of cyber security and overall situational awareness of control and sensor network implementations. The operation and interoperability of these tools will fill voids in current technological offerings and address issues that remain an impediment to the security of control systems. This report provides an FY 2012 update on the Sophia, Mesh Mapper, Intelligent Cyber Sensor, and Data Fusion projects with respect to the year-two tasks and annual reporting requirements of the INL Control System Situational Awareness Technology report (July 2010).

  13. Detection Technologies, Arms control and nonproliferation technologies. Third/fourth quarters 1993

    Energy Technology Data Exchange (ETDEWEB)

    Staehle, G; Stull, S; Talaber, C; Moulthrop, P [eds.

    1993-12-31

    This issue of Arms Control and Nonproliferation Technologies is another in a series of issues about specific means for detecting and identifying proliferation and other suspect activities outside the realm of arms control treaties. All the projects discussed are funded by the Office of Research and Development of the Department of Energy`s Office of Nonproliferation and National Security.

  14. Psychoacoustics Facts and Models

    CERN Document Server

    Fastl, Hugo

    2007-01-01

    Psychoacoustics – Facts and Models offers a unique, comprehensive summary of information describing the processing of sound by the human hearing system. It includes quantitative relations between sound stimuli and auditory perception in terms of hearing sensations, for which quantitative models are given, as well as an unequalled collection of data on the human hearing system as a receiver of acoustic information. In addition, many examples of the practical application of the results of basic research in fields such as noise control, audiology, or sound quality engineering are detailed. The third edition includes an additional chapter on audio-visual interactions and applications, plus more on applications throughout. Reviews of previous editions have characterized it as "an essential source of psychoacoustic knowledge," "a major landmark ," and a book that "without doubt will have a long-lasting effect on the standing and future evolution of this scientific domain."

  15. Control System Development for a Raman Spectrometer Using Microcontroller Technology

    Directory of Open Access Journals (Sweden)

    Alejandro J. Giménez

    2014-02-01

    Full Text Available An electronic control system has been developed for a Raman spectrometer by using electronics based on microcontroller technology. With these microcontrollers it is possible to emulate control circuitry capable of performing complex tasks, such as the monochromator step motor control and the photomultiplier pulse count required in the Raman spectroscopy process. This approach could be used to give new life to valuable scientific instruments and tools. The Raman spectrometer control built is now fully functional and compatible with Windows 7. Raman spectra from well-known materials are presented to compare results and in order to confirm the proper operation of the developed control system.

  16. Application of Autonomous Spacecraft Power Control Technology to Terrestrial Microgrids

    Science.gov (United States)

    Dever, Timothy P.; Trase, Larry M.; Soeder, James F.

    2014-01-01

    This paper describes the potential of the power campus located at the NASA Glenn Research Center (GRC) in Cleveland, Ohio for microgrid development. First, the benefits provided by microgrids to the terrestrial power grid are described, and an overview of Technology Needs for microgrid development is presented. Next, GRC's work on development of autonomous control for manned deep space vehicles, which are essentially islanded microgrids, is covered, and contribution of each of these developments to the microgrid Technology Needs is detailed. Finally, a description is provided of GRC's existing physical assets which can be applied to microgrid technology development, and a phased plan for development of a microgrid test facility is presented.

  17. Technological and life cycle assessment of organics processing odour control technologies

    Energy Technology Data Exchange (ETDEWEB)

    Bindra, Navin [School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario N1G2W1 (Canada); Dubey, Brajesh, E-mail: bkdubey@civil.iitkgp.ernet.in [School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario N1G2W1 (Canada); Environmental Engineering Division, Department of Civil Engineering, Indian Institute of Technology, Kharagpur, West Bengal 721302 (India); Dutta, Animesh [School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario N1G2W1 (Canada)

    2015-09-15

    As more municipalities and communities across developed world look towards implementing organic waste management programmes or upgrading existing ones, composting facilities are emerging as a popular choice. However, odour from these facilities continues to be one of the most important concerns in terms of cost & effective mitigation. This paper provides a technological and life cycle assessment of some of the different odour control technologies and treatment methods that can be implemented in organics processing facilities. The technological assessment compared biofilters, packed tower wet scrubbers, fine mist wet scrubbers, activated carbon adsorption, thermal oxidization, oxidization chemicals and masking agents. The technologies/treatment methods were evaluated and compared based on a variety of operational, usage and cost parameters. Based on the technological assessment it was found that, biofilters and packed bed wet scrubbers are the most applicable odour control technologies for use in organics processing faculties. A life cycle assessment was then done to compare the environmental impacts of the packed-bed wet scrubber system, organic (wood-chip media) bio-filter and inorganic (synthetic media) bio-filter systems. Twelve impact categories were assessed; cumulative energy demand (CED), climate change, human toxicity, photochemical oxidant formation, metal depletion, fossil depletion, terrestrial acidification, freshwater eutrophication, marine eutrophication, terrestrial eco-toxicity, freshwater eco-toxicity and marine eco-toxicity. The results showed that for all impact categories the synthetic media biofilter had the highest environmental impact, followed by the wood chip media bio-filter system. The packed-bed system had the lowest environmental impact for all categories. - Highlights: • Assessment of odour control technologies for organics processing facilities. • Comparative life cycle assessment of three odour control technologies was conducted

  18. Development of radioisotope tracer technology and nucleonic control system

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Joon Ha; Lee, Myun Joo; Jung, Sung Hee and others

    1999-04-01

    The purpose of this study is to develop the radioisotope tracer technology, which can be used in solving industrial and environmental problems and basic technology of nuclear control systems that are widely used for automation of industrial plants, and to build a strong tracer group to support the local industries. In relation to the tracer technology, the data acquisition system, the column scanning equipment and the detection pig for a leakage test have been developed. In order to use in analyzing data of tracer experiments, a computer program for the analysis of residence time distribution has been created as well. These results were utilized in developing the tracer technologies, such as the column scanning, the flow measurement using the dilution method, the simultaneous monitoring rotational movement of piston rings and the optimization of a waste water treatment facility, and the technologies were successfully demonstrated in the local industrial. The stripper of RFCC reactor has been examined to find an unwanted structure in it by imminent request from the industry. Related to the development of nucleonic control system, the state of art report on the technology has been written and an equipment for the analysis of asphalt content has been developed. (author)

  19. Energy-saving technology of vector controlled induction motor based on the adaptive neuro-controller

    Science.gov (United States)

    Engel, E.; Kovalev, I. V.; Karandeev, D.

    2015-10-01

    The ongoing evolution of the power system towards a Smart Grid implies an important role of intelligent technologies, but poses strict requirements on their control schemes to preserve stability and controllability. This paper presents the adaptive neuro-controller for the vector control of induction motor within Smart Gird. The validity and effectiveness of the proposed energy-saving technology of vector controlled induction motor based on adaptive neuro-controller are verified by simulation results at different operating conditions over a wide speed range of induction motor.

  20. Application of multi-function display and control technology

    Science.gov (United States)

    Spiger, R. J.; Farrell, R. J.; Holcomb, G. A.

    1982-01-01

    The NASA orbiter spacecraft incorporates a complex array of systems, displays, and controls. The incorporation of discrete dedicated controls into a multifunction display and control system (MFDCS) offers the potential for savings in weight, power, panel space, and crew training time. Technology identified as applicable to a MFDCS is applied to the orbiter orbital maneuvering system (OMS) and the electrical power distribution and control system (EPDCS) to derive concepts for a MFDCS design. Several concepts of varying degrees of performance and complexity are discussed and a suggested concept for further development is presented in greater detail. Both the hardware and software aspects and the human factors considerations of the designs are included.

  1. Fuzzy controllers in the control system of a brushless electric motor using HIL technology

    Directory of Open Access Journals (Sweden)

    Kalach Gennady

    2017-01-01

    Full Text Available This article proposes a method for creation of a control system for a brushless electric motor based on a fuzzy logic apparatus. The use of a fuzzy controller in this case can increase stability and improve the quality of the system under consideration, which was implemented in the Simulink environment using HIL technology. This technology increases the chances of successfully passing the test phase, considering the control system in prototype.

  2. Development and Application of Coating Weight Control Technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jin Hyoung [Dongbu Steel, Incheon (Korea, Republic of)

    2010-08-15

    Precise coating weight control is very important issue on quality and minimizing operating costs on continuous galvanizing line. These days, many steel making companies are having a new understanding of cost importance by rise raw material prices and customers requirement for cost reduction. Dongbu steel also meets these situations and decided to develop the technologies. Dongbu Steel developed Integrated coating weight control system jointly with Objective Control Ltd. and installed 2CGL and 4CGL. Several technological functions were developed and realized to achieve true hands-off operation and maximum cost benefit by combining model-based preset and dynamic prediction models. We also installed it on 1 CGL on April, 2008. This paper will present the interface, functions and application result of the integrated coating weight control system including Zn saving and coating weight uniformity.

  3. [Technological innovations in radiation oncology require specific quality controls].

    Science.gov (United States)

    Lenaerts, E; Mathot, M

    2014-01-01

    During the last decade, the field of radiotherapy has benefited from major technological innovations and continuously improving treatment efficacy, comfort and safety of patients. This mainly concerns the imaging techniques that allow 4D CT scan recording the respiratory phases, on-board imaging on linear accelerators that ensure perfect positioning of the patient for treatment and irradiation techniques that reduce very significantly the duration of treatment sessions without compromising quality of the treatment plan, including IMRT (Intensity Modulated Radiation Therapy) and VMAT (Volumetric Modulated Arc therapy). In this context of rapid technological change, it is the responsibility of medical physicists to regularly and precisely monitor the perfect functioning of new techniques to ensure patient safety. This requires the use of specific quality control equipment best suited to these new techniques. We will briefly describe the measurement system Delta4 used to control individualized treatment plan for each patient treated with VMAT technology.

  4. En-Tegrity - Advanced subsea well control technology

    Energy Technology Data Exchange (ETDEWEB)

    Edwards, Jeff

    2010-07-01

    Shear Seal Valve: En-Tegrity - Advanced subsea well control technology. With the growing complexity of well interventions operations such as zone isolations, chemical treatment, sand removal and side track re-completion drilling, there is an increasing demand for an efficient light well intervention service equipment. This paper details the design, development and qualification program undertaken to introduce a new technology for well interventions operations. The Shear Seal Valve provides dual barrier sealing integrity that is capable of cutting large diameter coiled tubing, drill pipe and intervention tooling within a single compact housing. The hydraulic design of the valve minimizes operating volumes and negates the requirement for mechanical ram locks therefore greatly simplifying control system complexity. Utilizing dual metal to metal sealing technology and a fail safe close rational the system is ideally suited to HPHT applications providing optimum operational integrity. (Author)

  5. Proportional control valves integrated in silicon nitride surface channel technology

    NARCIS (Netherlands)

    Groen, Maarten; Groenesteijn, Jarno; Meutstege, Esken; Brookhuis, Robert Anton; Brouwer, Dannis Michel; Lötters, Joost Conrad; Wiegerink, Remco J.

    2015-01-01

    We have designed and realized two types of proportional microcontrol valves in a silicon nitride surface channel technology process. This enables on-die integration of flow controllers with other surface channel devices, such as pressure sensors or thermal or Coriolis-based (mass) flow sensors, to

  6. Imazapyr-resistant maize technology adoption for witch weed control ...

    African Journals Online (AJOL)

    Saharan Africa. A new technology known as imazapyr-resistant maize (IRM) has proven to be effective in controlling it. This study examined the status of IRM adoption in western Kenya. A cross sectional survey that included 600 households, ...

  7. Adapting Wireless Technology to Lighting Control and Environmental Sensing

    Energy Technology Data Exchange (ETDEWEB)

    Dana Teasdale; Francis Rubinstein; Dave Watson; Steve Purdy

    2005-10-01

    The high cost of retrofitting buildings with advanced lighting control systems is a barrier to adoption of this energy-saving technology. Wireless technology, however, offers a solution to mounting installation costs since it requires no additional wiring to implement. To demonstrate the feasibility of such a system, a prototype wirelessly-controlled advanced lighting system was designed and built. The system includes the following components: a wirelessly-controllable analog circuit module (ACM), a wirelessly-controllable electronic dimmable ballast, a T8 3-lamp fixture, an environmental multi-sensor, a current transducer, and control software. The ACM, dimmable ballast, multi-sensor, and current transducer were all integrated with SmartMesh{trademark} wireless mesh networking nodes, called motes, enabling wireless communication, sensor monitoring, and actuator control. Each mote-enabled device has a reliable communication path to the SmartMesh Manager, a single board computer that controls network functions and connects the wireless network to a PC running lighting control software. The ACM is capable of locally driving one or more standard 0-10 Volt electronic dimmable ballasts through relay control and a 0-10 Volt controllable output. The mote-integrated electronic dimmable ballast is designed to drive a standard 3-lamp T8 light fixture. The environmental multi-sensor measures occupancy, light level and temperature. The current transducer is used to measure the power consumed by the fixture. Control software was developed to implement advanced lighting algorithms, including daylight ramping, occupancy control, and demand response. Engineering prototypes of each component were fabricated and tested in a bench-scale system. Based on standard industry practices, a cost analysis was conducted. It is estimated that the installation cost of a wireless advanced lighting control system for a retrofit application is at least 30% lower than a comparable wired system for

  8. Nanotechnology for Site Remediation: Fact Sheet

    Science.gov (United States)

    This fact sheet presents a snapshot of nanotechnology and its current uses in remediation. It presents information to help site project managers understand the potential applications of this group of technologies at their sites.

  9. High Blood Pressure Facts

    Science.gov (United States)

    ... Stroke Heart Disease Cholesterol Salt Million Hearts® WISEWOMAN High Blood Pressure Facts Recommend on Facebook Tweet Share Compartir On ... the facts about high blood pressure [PDF-255K] . High Blood Pressure in the United States About 75 million American ...

  10. Assessing Basic Fact Fluency

    Science.gov (United States)

    Kling, Gina; Bay-Williams, Jennifer M.

    2014-01-01

    In this article, the authors share a variety of ways to formatively assess basic fact fluency. The define fluency, raise some issues related to timed testing, and then share a collection of classroom-tested ideas for authentic fact fluency assessment. This article encourages teachers to try a variety of alternative assessments from this sampling,…

  11. Type 1 Diabetes Facts

    Science.gov (United States)

    ... Contact Us Donate Events More Type 1 Diabetes Facts Type 1 diabetes (T1D) is an autoimmune disease ... of T1D The Complexity of Diagnosing T1D T1D Facts Insulin Types and Usage T1D Treatments Sign up ...

  12. Meth (Crank, Ice) Facts

    Science.gov (United States)

    ... That People Abuse » Meth (Crank, Ice) Facts Meth (Crank, Ice) Facts Listen Methamphetamine—meth for short—is a white, bitter powder. Sometimes ... clear or white shiny rock (called a crystal). Meth powder can be eaten or snorted up the ...

  13. Robot Control System based on Web Application and RFID Technology

    Directory of Open Access Journals (Sweden)

    Barenji Ali Vatankhah

    2015-01-01

    Full Text Available This paper discusses an integration driven framework for enabling the RFID based identification of parts to perform robotic distributor operations in the random mix based parts control based on web application. The RFID technology senses newly arriving parts to be distribution robot, the robot is able to recognize them and perform cooperative distributing via web-based application. The developed web application control system is implemented in the educational robotic arm. RFID system sends real time information from parts to the web application and web based application makes a decision for control of the robot arm, controller of robot controls the robot as based on the decision from web application. The proposed control system has increases the reconfiguration and scalability of robot system.

  14. Performance of Fourth-Grade Students with Learning Disabilities on Multiplication Facts Comparing Teacher-Mediated and Technology-Mediated Interventions: A Preliminary Investigation

    Science.gov (United States)

    Bryant, Brian R.; Ok, Minwook; Kang, Eun Young; Kim, Min Kyung; Lang, Russell; Bryant, Diane Pedrotty; Pfannestiel, Kathleen

    2015-01-01

    Instructional applications (apps) are educational software programs that can be accessed via mobile technologies (e.g., iPad, smartphone) and used to help students acquire various academic skills, including mathematics. Although research suggests that app-based instruction (AI) can be effective, there is a paucity of research comparing AI, to…

  15. CRITICAL CONTROL POINTS ON THE TECHNOLOGICAL FLOW OF PANIFICATION

    Directory of Open Access Journals (Sweden)

    Gigel PARASCHIV

    2013-05-01

    Full Text Available Bread and panification products are intended for direct human consumption and underlying nutritional pyramid, it can affect the consumers health in case of biological, chemical or physical contamination, immediate or delayed, by noxious accumulation in the human organism. Only by rigorous compliance of the production rules throughout the technological process can ensure the quality and food safety of these products. If the risk can be prevented, eliminated or reduce to an acceptable level, as a result of a control actions made at that stage, it is considered a Critical Control Point (CCP. There can be checkpoints where it can exert a control action. Thus, the checkpoint is represented by any stage in which the risk factors, biological, chemical or physical, can be controlled in order to prevent, disrupt or reduce them to an acceptable level. This paper is referring to the control points on the technological flow of the bread fabrication, in all phases of this technological flow, laying stress on that points (or phases which can affect security and food safety, through the influence of parameters of any kind on the quality of finished products.

  16. Coal surface control for advanced physical fine coal cleaning technologies

    Energy Technology Data Exchange (ETDEWEB)

    Morsi, B.I.; Chiang, S.H.; Sharkey, A.; Blachere, J.; Klinzing, G.; Araujo, G.; Cheng, Y.S.; Gray, R.; Streeter, R.; Bi, H.; Campbell, P.; Chiarlli, P.; Ciocco, M.; Hittle, L.; Kim, S.; Kim, Y.; Perez, L.; Venkatadri, R.

    1992-01-01

    This final report presents the research work carried out on the Coal Surface Control for Advanced Physical Fine Coal Cleaning Technologies project, sponsored by the US Department of Energy, Pittsburgh Energy Technology Center (DOE/PETC). The project was to support the engineering development of the selective agglomeration technology in order to reduce the sulfur content of US coals for controlling SO[sub 2] emissions (i.e., acid rain precursors). The overall effort was a part of the DOE/PETCs Acid Rain Control Initiative (ARCI). The overall objective of the project is to develop techniques for coal surface control prior to the advanced physical fine coal cleaning process of selective agglomeration in order to achieve 85% pyrite sulfur rejection at an energy recovery greater than 85% based on run-of-mine coal. The surface control is meant to encompass surface modification during grinding and laboratory beneficiation testing. The project includes the following tasks: Project planning; methods for analysis of samples; development of standard beneficiation test; grinding studies; modification of particle surface; and exploratory R D and support. The coal samples used in this project include three base coals, Upper Freeport - Indiana County, PA, Pittsburgh NO. 8 - Belmont County, OH, and Illinois No. 6 - Randolph County, IL, and three additional coals, Upper Freeport - Grant County- WV, Kentucky No. 9 Hopkins County, KY, and Wyodak - Campbell County, WY. A total of 149 drums of coal were received.

  17. Thermal control of the Lidar In-Space Technology Experiment

    Science.gov (United States)

    Carlson, Ann B.; Roettker, William A.

    1987-01-01

    The Lidar In-Space Technology Experiment (LITE) will employ lidar techniques to study the atmosphere from space. The LITE instrument will be flown in the Space Shuttle Payload Bay with an earth directed orientation. The experiment thermal control incorporates both active and passive techniques. The Laser Transmitter Module (LTM) and the system electronics will be actively cooled through the Shuttle pallet coolant loop. The receiver system and experiment platform will be passsively controlled through the use of insulation and component surface properties. This paper explains the thermal control techniques used and the analysis results, with primary focus on the receiver system.

  18. Impact of active controls technology on structural integrity

    Science.gov (United States)

    Noll, Thomas; Austin, Edward; Donley, Shawn; Graham, George; Harris, Terry

    1991-01-01

    This paper summarizes the findings of The Technical Cooperation Program to assess the impact of active controls technology on the structural integrity of aeronautical vehicles and to evaluate the present state-of-the-art for predicting the loads caused by a flight-control system modification and the resulting change in the fatigue life of the flight vehicle. The potential for active controls to adversely affect structural integrity is described, and load predictions obtained using two state-of-the-art analytical methods are given.

  19. Advanced solutions in power systems HVDC, facts, and artificial intelligence

    CERN Document Server

    Liu, Chen-Ching; Edris, Abdel-Aty

    2016-01-01

    Provides insight on both classical means and new trends in the application of power electronic and artificial intelligence techniques in power system operation and control This book presents advanced solutions for power system controllability improvement, transmission capability enhancement and operation planning. The book is organized into three parts. The first part describes the CSC-HVDC and VSC-HVDC technologies, the second part presents the FACTS devices, and the third part refers to the artificial intelligence techniques. All technologies and tools approached in this book are essential for power system development to comply with the smart grid requirements.

  20. Inlet Flow Control and Prediction Technologies for Embedded Propulsion Systems

    Science.gov (United States)

    McMillan, Michelle L.; Mackie, Scott A.; Gissen, Abe; Vukasinovic, Bojan; Lakebrink, Matthew T.; Glezer, Ari; Mani, Mori; Mace, James L.

    2011-01-01

    Fail-safe, hybrid, flow control (HFC) is a promising technology for meeting high-speed cruise efficiency, low-noise signature, and reduced fuel-burn goals for future, Hybrid-Wing-Body (HWB) aircraft with embedded engines. This report details the development of HFC technology that enables improved inlet performance in HWB vehicles with highly integrated inlets and embedded engines without adversely affecting vehicle performance. In addition, new test techniques for evaluating Boundary-Layer-Ingesting (BLI)-inlet flow-control technologies developed and demonstrated through this program are documented, including the ability to generate a BLI-like inlet-entrance flow in a direct-connect, wind-tunnel facility, as well as, the use of D-optimal, statistically designed experiments to optimize test efficiency and enable interpretation of results. Validated improvements in numerical analysis tools and methods accomplished through this program are also documented, including Reynolds-Averaged Navier-Stokes CFD simulations of steady-state flow physics for baseline, BLI-inlet diffuser flow, as well as, that created by flow-control devices. Finally, numerical methods were employed in a ground-breaking attempt to directly simulate dynamic distortion. The advances in inlet technologies and prediction tools will help to meet and exceed "N+2" project goals for future HWB aircraft.

  1. An environmental decision framework applied to marine engine control technologies.

    Science.gov (United States)

    Corbett, James J; Chapman, David

    2006-06-01

    This paper develops a decision framework for considering emission control technologies on marine engines, informed by standard decision theory, with an open structure that may be adapted by operators with specific vessel and technology attributes different from those provided here. Attributes relate objectives important to choosing control technologies with specific alternatives that may meet several of the objectives differently. The transparent framework enables multiple stakeholders to understand how different subjective judgments and varying attribute properties may result in different technology choices. Standard scoring techniques ensure that attributes are not biased by subjective scoring and that weights are the primary quantitative input where subjective preferences are exercised. An expected value decision structure is adopted that considers probabilities (likelihood) that a given alternative can meet its claims; alternative decision criteria are discussed. Capital and annual costs are combined using a net present value approach. An iterative approach is advocated that allows for screening and disqualifying alternatives that do not meet minimum conditions for acceptance, such as engine warranty or U.S. Coast Guard requirements. This decision framework assists vessel operators in considering explicitly important attributes and in representing choices clearly to other stakeholders concerned about reducing air pollution from vessels. This general decision structure may also be applied similarly to other environmental controls in marine applications.

  2. Controlling and Monitoring of Electric Feeders Using GSM Network Technology

    Directory of Open Access Journals (Sweden)

    AHMED Afaz Uddin

    2013-10-01

    Full Text Available The application of computer interfaced controlling devices is increasingly rapidly in modern age. Analogous wired systems are substituted by computer interfaced system alternatives in growingnumber of industries. Such control systems had been developed with complex and critical high-end stuffs. In this paper, we developed an automated system that controls the switching of electric feeder power supply featuring the existing GSM technology. The target is tooperate the device according to a preset sequence of on-off mode for three feeders after a particular time interval and to monitor the running condition. The device sends short message updating the status of every action. It also warns the consumers about load shedding using GSM module via sending message. Controlling the gate pulse of a MOSFET that operates the relay, it executes on-off operation of the circuit breaker of the respective feeders. Since GSM technology is used worldwide for communication, third world countries that are still struggling to meet the power demand can use this technology to operate and monitor the condition of power distribution. To operate the GSM device, AT command of GSM location operation for SIM900 is used. This paper targets to improve the power distribution system in developing countries like India, Bangladesh, Nepal where powercrisis and load shedding is quite a common phenomenon.

  3. ACTS TDMA network control. [Advanced Communication Technology Satellite

    Science.gov (United States)

    Inukai, T.; Campanella, S. J.

    1984-01-01

    This paper presents basic network control concepts for the Advanced Communications Technology Satellite (ACTS) System. Two experimental systems, called the low-burst-rate and high-burst-rate systems, along with ACTS ground system features, are described. The network control issues addressed include frame structures, acquisition and synchronization procedures, coordinated station burst-time plan and satellite-time plan changes, on-board clock control based on ground drift measurements, rain fade control by means of adaptive forward-error-correction (FEC) coding and transmit power augmentation, and reassignment of channel capacities on demand. The NASA ground system, which includes a primary station, diversity station, and master control station, is also described.

  4. Embedded Web Technology: Internet Technology Applied to Real-Time System Control

    Science.gov (United States)

    Daniele, Carl J.

    1998-01-01

    The NASA Lewis Research Center is developing software tools to bridge the gap between the traditionally non-real-time Internet technology and the real-time, embedded-controls environment for space applications. Internet technology has been expanding at a phenomenal rate. The simple World Wide Web browsers (such as earlier versions of Netscape, Mosaic, and Internet Explorer) that resided on personal computers just a few years ago only enabled users to log into and view a remote computer site. With current browsers, users not only view but also interact with remote sites. In addition, the technology now supports numerous computer platforms (PC's, MAC's, and Unix platforms), thereby providing platform independence.In contrast, the development of software to interact with a microprocessor (embedded controller) that is used to monitor and control a space experiment has generally been a unique development effort. For each experiment, a specific graphical user interface (GUI) has been developed. This procedure works well for a single-user environment. However, the interface for the International Space Station (ISS) Fluids and Combustion Facility will have to enable scientists throughout the world and astronauts onboard the ISS, using different computer platforms, to interact with their experiments in the Fluids and Combustion Facility. Developing a specific GUI for all these users would be cost prohibitive. An innovative solution to this requirement, developed at Lewis, is to use Internet technology, where the general problem of platform independence has already been partially solved, and to leverage this expanding technology as new products are developed. This approach led to the development of the Embedded Web Technology (EWT) program at Lewis, which has the potential to significantly reduce software development costs for both flight and ground software.

  5. Pinellas Plant facts

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-11-01

    The Pinellas Plant, near St. Petersburg, Florida, is wholly owned by the United States Government. It is operated for the Department of Energy (DOE) by GE Aerospace, Neutron Devices (GEND). This plant was built in 1956 to manufacture neutron generators, a principal component in nuclear weapons. The neutron generators built at Neutron Devices consist of a miniaturized linear ion accelerator assembled with the pulsed electrical power supplies required for its operation. Production of these devices has necessitated the development of several uniquely specialized areas of competence and supporting facilities. The ion accelerator, or neutron tube, requires ultra clean, high vacuum technology; hermetic seals between glass, ceramic, glass-ceramic, and metal materials; plus high voltage generation and measurement technology. The existence of these capabilities at Neutron Devices has led directly to the assignment of other weapon application products: the lightning arrester connector, specialty capacitor, vacuum switch, and crystal resonator. Other product assignments such as active and reserve batteries and the radioisotopically-powered thermoelectric generator evolved from the plant`s materials measurement and controls technologies which are required to ensure neutron generator life.

  6. Assessment of pollution prevention and control technology for plating operations

    Science.gov (United States)

    Chalmer, Paul D.; Sonntag, William A.; Cushnie, George C., Jr.

    1995-01-01

    The National Center for Manufacturing Sciences (NCMS) is sponsoring an on-going project to assess pollution prevention and control technology available to the plating industry and to make this information available to those who can benefit from it. Completed project activities include extensive surveys of the plating industry and vendors of technologies and an indepth literature review. The plating industry survey was performed in cooperation with the National Association of Metal Finishers. The contractor that conducted the surveys and prepared the project products was CAI Engineering. The initial products of the project were made available in April, 1994. These products include an extensive report that presents the results of the surveys and literature review and an electronic database. The project results are useful for all those associated with pollution prevention and control in the plating industry. The results show which treatment, recovery and bath maintenance technologies have been most successful for different plating processes and the costs for purchasing and operating these technologies. The project results also cover trends in chemical substitution, the identification of compliance-problem pollutants, sludge generation rates, off-site sludge recovery and disposal options, and many other pertinent topics.

  7. Preliminary Cost Estimates of Pollution Control Technologies for Geothermal Developments

    Energy Technology Data Exchange (ETDEWEB)

    Sung, R.; Houser, G.; Richard, G.; Cotter, J.; Weller, P.; Pulaski, E.

    1979-10-01

    This is the first report from the EPA estimating the cost of technology for mitigating pollution that might arise from geothermal power systems. The Environmental Protection Agency (EPA) has taken an initial step towards the establishment of regulatory standards for the geothermal industry by preparing a document entitled Pollution Control Guidance for Geothermal Energy Development. This report supports that document by providing pollution control cost information. The objective of this report is to provide preliminary cost estimates for air and water pollution treatment and disposal technologies applicable for geothermal energy conversion systems. Cost estimates include both annualized capital investment and operation and maintenance (O&M) costs for various levels of environmental requirements. [DJE-2005

  8. Integrated Power and Attitude Control System (IPACS) technology developments

    Science.gov (United States)

    Eisenhaure, David B.; Bechtel, Robert; Hockney, Richard; Oglevie, Ron; Olszewski, Mitch

    1990-01-01

    Integrated Power and Attitude Control System (IPACS) studies performed over a decade ago established the feasibility of storing electrical energy in flywheels and utilizing the resulting angular momentum for spacecraft attitude control. Such a system has been shown to have numerous attractive features relative to more contemporary technology, and is appropriate to many applications (including high-performance slewing actuators). Technology advances over the last two decades in composite rotors, motor/generator/electronics, and magnetic bearings are found to support the use of IPACS for increasingly sophisticated applications. It is concluded that the concept offers potential performance advantages as well as savings in mass and life-cycle cost. Viewgraphs and discussion on IPACS are included.

  9. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... 2017 Alzheimer's Disease Facts and Figures Download the Full Report: Download the Infographic: English Spanish Share the facts: Quick Facts Prevalence Mortality Caregivers Costs Special Report Alzheimer's in each state Quick Facts ...

  10. Network Congestion Control in 4G Technology Through Iterative Server

    OpenAIRE

    Khaleel Ahmad; Sunil Kumar; Jayant Shekhar

    2012-01-01

    During the last few decades, mobile communication has developed rapidly. The increasing dependency of people on telecommunication resources is pushing even more current technological developments in the mobile world. In Real-time multimedia applications, such as Live TV or live movie, video conferencing, VoIP, on-line gaming etc. are exciting applications to the success of 4G.In todays Internet these applications are not subject to congestion control, therefore the growth of popularity of the...

  11. Avian Fact Sheet

    Energy Technology Data Exchange (ETDEWEB)

    NWCC Wildlife Work Group

    2004-12-01

    OAK-B135 After conducting four national research meetings, producing a document guiding research: Metrics and Methods for Determining or Monitoring Potential Impacts on Birds at Existing and Proposed Wind Energy Sites, 1999, and another paper, Avian Collisions with Wind Turbines: A Summary of Existing Studies and Comparisons to Other Sources of Avian Collision Mortality in the United States, 2001, the subcommittee recognized a need to summarize in a short fact sheet what is known about avian-wind interaction and what questions remain. This fact sheet attempts to summarize in lay terms the result of extensive discussion about avian-wind interaction on land. This fact sheet does not address research conducted on offshore development. This fact sheet is not intended as a conclusion on the subject; rather, it is a summary as of Fall/Winter 2002.

  12. Facts about Type 2

    Medline Plus

    Full Text Available ... In Honor Become a Member En Español Type 1 Type 2 About Us Online Community Meal Planning ... Basics Home Symptoms Diagnosis America's Diabetes Challenge Type 1 Type 2 Facts About Type 2 Enroll in ...

  13. Sepsis Fact Sheet

    Science.gov (United States)

    ... Education About NIGMS NIGMS Home > Science Education > Sepsis Sepsis Tagline (Optional) Middle/Main Content Area PDF Version ( ... KB) En español Other Fact Sheets What is sepsis? Sepsis is a serious medical condition. It is ...

  14. Blood Facts and Statistics

    Science.gov (United States)

    ... Donor Community Learn About Blood Blood Facts and Statistics Blood Types Blood Components What Happens to Donated Blood Blood and Diversity History of Blood Transfusion Iron and Blood Donation Hosting ...

  15. Facts about Hypospadias

    Science.gov (United States)

    ... label> Information For… Media Policy Makers Facts about Hypospadias Language: English (US) Español (Spanish) Recommend on Facebook ... at the tip of the penis. What is Hypospadias? Hypospadias is a birth defect in boys in ...

  16. Trauma Fact Sheet

    Science.gov (United States)

    ... NIGMS NIGMS Home > Science Education > Physical Trauma Physical Trauma Tagline (Optional) Middle/Main Content Area PDF Version (572 KB) Other Fact Sheets What is physical trauma? Physical trauma is a serious injury to the ...

  17. Burns Fact Sheet

    Science.gov (United States)

    ... of most of these problems is the body’s explosive inflammatory response. A normal inflammatory response protects the ... your website or other digital platform? This fact sheet and others are available for syndication through the ...

  18. Facts about Type 2

    Medline Plus

    Full Text Available ... Know Your Risk Alert Day Diabetes Basics Home Symptoms Diagnosis America's Diabetes Challenge Type 1 Type 2 Facts ... Online Community Site Menu Are You at Risk? Diagnosis Lower Your Risk Risk Test Alert Day Prediabetes ...

  19. CMS Fast Facts

    Data.gov (United States)

    U.S. Department of Health & Human Services — CMS has developed a new quick reference statistical summary on annual CMS program and financial data. CMS Fast Facts includes summary information on total program...

  20. Facts about Benzene

    Science.gov (United States)

    ... phosphorus List by Category Chemical-Specific Fact Sheets Toxicology FAQs Case Definitions Toxic Syndrome Descriptions Toxicological Profiles ... types of lubricants, rubbers, dyes, detergents, drugs, and pesticides. How you could be exposed to benzene Outdoor ...

  1. Childhood Obesity Facts

    Science.gov (United States)

    ... Breastfeeding Micronutrient Malnutrition State and Local Programs Childhood Obesity Facts Recommend on Facebook Tweet Share Compartir On ... Children (WIC) Program, 2000–2014 Prevalence of Childhood Obesity in the United States, 2011-2014 Childhood obesity ...

  2. Silicosis: Learn the Facts!

    Science.gov (United States)

    Silicosis: Learn the Facts! Do you work in construction or do abrasive blasting? Do you know someone ... document. 3 Safety Information For more information on silicosis and how it can affect you and your ...

  3. Facts about Type 2

    Medline Plus

    Full Text Available ... Type 2 About Us Online Community Meal Planning Sign In Search: Search More Sites Search ≡ Are You ... Your Risk Alert Day Diabetes Basics Home Symptoms Diagnosis America's Diabetes Challenge Type 1 Type 2 Facts ...

  4. Facts about Pulmonary Atresia

    Science.gov (United States)

    ... Websites Information For… Media Policy Makers Facts about Pulmonary Atresia Recommend on Facebook Tweet Share Compartir Click ... pick up oxygen for the body. What is Pulmonary Atresia? Pulmonary atresia is a birth defect of ...

  5. Cholesterol Facts and Statistics

    Science.gov (United States)

    ... Blood Pressure Salt Million Hearts® WISEWOMAN Program High Cholesterol Facts Recommend on Facebook Tweet Share Compartir Find ... about high cholesterol in the United States. High Cholesterol in the United States In 2011–2012, 78 ...

  6. Facts about Physical Activity

    Science.gov (United States)

    ... Micronutrient Malnutrition State and Local Programs Facts about Physical Activity Recommend on Facebook Tweet Share Compartir Some Americans ... Activity Guideline for aerobic activity than older adults. Physical activity and socioeconomic status Adults with more education are ...

  7. SEER Cancer Stat Facts

    Science.gov (United States)

    Cancer Statistical Fact Sheets are summaries of common cancer types developed to provide an overview of frequently-requested cancer statistics including incidence, mortality, survival, stage, prevalence, and lifetime risk.

  8. Biodiesel Basics (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2014-06-01

    This fact sheet provides a brief introduction to biodiesel, including a discussion of biodiesel blends, which blends are best for which vehicles, where to buy biodiesel, how biodiesel compares to diesel fuel in terms of performance, how biodiesel performs in cold weather, whether biodiesel use will plug vehicle filters, how long-term biodiesel use may affect engines, biodiesel fuel standards, and whether biodiesel burns cleaner than diesel fuel. The fact sheet also dismisses the use of vegetable oil as a motor fuel.

  9. [Suicide, a social fact].

    Science.gov (United States)

    Baudelot, Christian

    2017-04-01

    Treating suicide as a social fact means disregarding its individual and dramatic dimensions. Sociologists do not reason on the basis of specific cases but by studying the variations, in space and time, of suicide rates. Their contribution relates essentially to a renewed perspective on society: suicide is in fact a very accurate indicator of the intensity and quality of the bonds which unite or isolate individuals in a society. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  10. Environmental products from EPRI`s Environmental Control Technology Center

    Energy Technology Data Exchange (ETDEWEB)

    Andes, G.M.; Maybach, G.B. [Electric Power Research Inst., Barker, NY (United States). Environmental Control Technology Center

    1994-12-31

    Since 1987, developments from the research at EPRI`s Environmental Control Technology Center (ECTC) have been applied to coal-fired utility power plants to maximize emissions control systems, decrease capital and operating costs, and increase system reliability. The ECTC has made several significant advancements in both wet and dry FGD technologies over the years and is currently being utilized to investigate many future environmental issues, such as the measurement and control of toxic compounds and SOx/NOx emissions. This paper discusses the equipment capabilities of the ECTC, the scope of ongoing research, and the industry benefits resulting from the EPRI products generated from the Center. Two specific case studies of environmental products from the Center are profiled to describe the development of products at the ECTC, and the transition of research products to commercial prototypes. One such product, the On-Line Chemistry Monitor, allows for real-time monitoring of critical FGD chemistry parameters, while the other, the Automatic Limestone Grind Control system, provides for precise control of reagent grind to maximize performance, cost, and utilization.

  11. Control of coupled oscillator networks with application to microgrid technologies

    Science.gov (United States)

    Arenas, Alex

    The control of complex systems and network-coupled dynamical systems is a topic of vital theoretical importance in mathematics and physics with a wide range of applications in engineering and various other sciences. Motivated by recent research into smart grid technologies, we study the control of synchronization and consider the important case of networks of coupled phase oscillators with nonlinear interactions-a paradigmatic example that has guided our understanding of self-organization for decades. We develop a method for control based on identifying and stabilizing problematic oscillators, resulting in a stable spectrum of eigenvalues, and in turn a linearly stable syn- chronized state. The amount of control, that is, number of oscillators, required to stabilize the network is primarily dictated by the coupling strength, dynamical heterogeneity, and mean degree of the network, and depends little on the structural heterogeneity of the network itself.

  12. Control of coupled oscillator networks with application to microgrid technologies.

    Science.gov (United States)

    Skardal, Per Sebastian; Arenas, Alex

    2015-08-01

    The control of complex systems and network-coupled dynamical systems is a topic of vital theoretical importance in mathematics and physics with a wide range of applications in engineering and various other sciences. Motivated by recent research into smart grid technologies, we study the control of synchronization and consider the important case of networks of coupled phase oscillators with nonlinear interactions-a paradigmatic example that has guided our understanding of self-organization for decades. We develop a method for control based on identifying and stabilizing problematic oscillators, resulting in a stable spectrum of eigenvalues, and in turn a linearly stable synchronized state. The amount of control, that is, number of oscillators, required to stabilize the network is primarily dictated by the coupling strength, dynamical heterogeneity, and mean degree of the network, and depends little on the structural heterogeneity of the network itself.

  13. Research on control technology of hardware parallelism for marine controlled source electromagnetic transmitter

    Science.gov (United States)

    Wang, Meng; Deng, Ming; Luo, Xianhu; Zhao, Qingxian; Chen, Kai; Jing, Jianen

    2018-02-01

    The marine controlled source electromagnetic (CSEM) method has been recognized as an effective exploration method of shallow hydrocarbons around the world. We developed our own underwater marine CSEM transmitter that consisted of many functional modules with various response times. We previously adopted a centralized software-control technology to design the transmitter circuit topological structure. That structure probably generated a control disorder or malfunction. These undesirable conditions could lead to repeated recovery and deployment of the transmitter, which not only consumed time but also affected data continuity and establishment of stable and continuous CSEM field. We developed an instrument design concept named ‘control technology of hardware parallelism’. In this design, a noteworthy innovation of our new technology is to solve the above-mentioned problems at the physical and fundamental levels. We used several self-contained control-units to simultaneously accomplish the predetermined functions of the transmitter. The new solution relies on two technologies: multi-core embedded technology and multi-channel parallel optical-fiber data transmission technology. The first technology depends on many independent microcontrollers. Every microcontroller is only used to achieve a customized function. The second one relies on several multiple optical-fiber transmission channels realized by a complex programmable logic device and two optical-fiber conversion devices, which are used to establish a communication link between the shipboard monitoring and control-unit and underwater transmitter. We have conducted some marine experiments to verify the reliability and stability of the new method. In particular, the new technology used in the transmitter system could help us obtain more useful measured data in a limited time, improve real-time efficiency, and support the establishment of a stable CSEM field.

  14. Patenting the bomb: nuclear weapons, intellectual property, and technological control.

    Science.gov (United States)

    Wellerstein, Alex

    2008-03-01

    During the course of the Manhattan Project, the U.S. government secretly attempted to acquire a monopoly on the patent rights for inventions used in the production of nuclear weapons and nuclear energy. The use of patents as a system of control, while common for more mundane technologies, would seem at first glance to conflict with the regimes of secrecy that have traditionally been associated with nuclear weapons. In explaining the origins and operations of the Manhattan Project patent system, though, this essay argues that the utilization of patents was an ad hoc attempt at legal control of the atomic bomb by Manhattan Project administrators, focused on the monopolistic aspects of the patent system and preexisting patent secrecy legislation. From the present perspective, using patents as a method of control for such weapons seems inadequate, if not unnecessary; but at the time, when the bomb was a new and essentially unregulated technology, patents played an important role in the thinking of project administrators concerned with meaningful postwar control of the bomb.

  15. The development of advanced instrumentation and control technology -The development of basic technology for instrumentation and control-

    Energy Technology Data Exchange (ETDEWEB)

    Ham, Chang Sik; Kwon, Kee Choon; Park, Jae Chang; Kim, Jung Taek; Jung, Chul Hwan; Lee, Dong Yung; Kim, Chang Hoi; Hwang, In Koo; Kim, Jung Soo; Nah, Nan Joo [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1995-07-01

    In this report automatic startup technology and dynamic alarm processing technology are developed. We designed an automatic control system had four modes and six break points. The four modes are heating mode I, heating mode II, heating mode III and critical mode. The six break points are RHR isolation and pressurizer bubble generation, P-6, critical conformation and another three break points for the start point of each mode from heating mode II to critical mode. We defined control variables and components at each mode and developed control algorithms. The conceptual design for automatic startup system configuration and interface with test facility was developed. These results will be used for detail design and software implementation in the project of next year. For development of dynamic alarm processing technology, necessary techniques were selected according to the survey on current development activities and the analysis on design documents. Alarm operating procedures were studied for obtaining casual relationships among alarms and part of a preliminary prototype was implemented in this first year using the results of the analysis including various techniques studied during the survey and analysis stage. 70 figs, 7 tabs, 77 refs. (Author).

  16. Applications of CELSS technology to controlled environment agriculture

    Science.gov (United States)

    Bates, Maynard E.; Bubenheim, David L.

    1991-01-01

    Controlled environment agriculture (CEA) is defined as the use of environmental manipulation for the commercial production of organisms, whether plants or animals. While many of the technologies necessary for aquaculture systems in North America is nevertheless doubling approximately every five years. Economic, cultural, and environmental pressures all favor CEA over field production for many non-commodity agricultural crops. Many countries around the world are already dependent on CEA for much of their fresh food. Controlled ecological life support systems (CELSS), under development at ARC, KSC, and JSC expand the concept of CEA to the extent that all human requirements for food, oxygen, and water will be provided regenerated by processing of waste streams to supply plant inputs. The CELSS will likely contain plants, humans, possibly other animals, microorganisms and physically and chemical processors. In effect, NASA will create engineered ecosystems. In the process of developing the technology for CELSS, NASA will develop information and technology which will be applied to improving the efficiency, reliability, and cost effectiveness for CEA, improving its resources recycling capabilities, and lessening its environmental impact to negligible levels.

  17. Environmentally Friendly Coating Technology for Autonomous Corrosion Control

    Science.gov (United States)

    Calle, Luz M.; Li, Wenyan; Buhrow, Jerry W.; Johnsey, Marissa N.; Jolley, Scott T.; Pearman, Benjamin P.; Zhang, Xuejun; Fitzpatrick, Lilliana; Gillis, Mathew; Blanton, Michael; hide

    2016-01-01

    This work concerns the development of environmentally friendly encapsulation technology, specifically designed to incorporate corrosion indicators, inhibitors, and self-healing agents into a coating, in such a way that the delivery of the indicators and inhibitors is triggered by the corrosion process, and the delivery of self-healing agents is triggered by mechanical damage to the coating. Encapsulation of the active corrosion control ingredients allows the incorporation of desired autonomous corrosion control functions such as: early corrosion detection, hidden corrosion detection, corrosion inhibition, and self-healing of mechanical damage into a coating. The technology offers the versatility needed to include one or several corrosion control functions into the same coating.The development of the encapsulation technology has progressed from the initial proof-of-concept work, in which a corrosion indicator was encapsulated into an oil-core (hydrophobic) microcapsule and shown to be delivered autonomously, under simulated corrosion conditions, to a sophisticated portfolio of micro carriers (organic, inorganic, and hybrid) that can be used to deliver a wide range of active corrosion ingredients at a rate that can be adjusted to offer immediate as well as long-term corrosion control. The micro carriers have been incorporated into different coating formulas to test and optimize the autonomous corrosion detection, inhibition, and self-healing functions of the coatings. This paper provides an overview of progress made to date and highlights recent technical developments, such as improved corrosion detection sensitivity, inhibitor test results in various types of coatings, and highly effective self-healing coatings based on green chemistry.

  18. Control system by the technological electron Linac KUT-20

    CERN Document Server

    Akchurin, Y I; Gurin, V A; Demidov, N V

    2001-01-01

    The high-power technological electron linac KUT-20 was developed at the Science Research Complex 'Accelerator' of NSC KIPT. The linac consists of two 1.2 m length accelerating structures with a variable geometry and an injector. The latter comprises a diode electron gun,a klystron type buncher and an accelerating cavity.With a RF supply power at accelerating structure entries of 11 MW and with a current at the accelerator exit of 1A,the beam energy will be up to 20 MeV.An average beam power is planned to be 20 kW.All systems of the accelerator are controlled by a computerised control system. The program and technical complex consist of PC equipped with fast ADC control console, synchronization unit, microprocessor-operated complexes.

  19. Material Protection, Accounting, and Control Technologies (MPACT) Advanced Integration Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Mike [Idaho National Lab. (INL), Idaho Falls, ID (United States); Cipiti, Ben [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Demuth, Scott Francis [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Durkee, Jr., Joe W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Fallgren, Andrew James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Jarman, Ken [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Li, Shelly [Idaho National Lab. (INL), Idaho Falls, ID (United States); Meier, Dave [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Osburn, Laura Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Pereira, Candido [Argonne National Lab. (ANL), Argonne, IL (United States); Dasari, Venkateswara Rao [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ticknor, Lawrence O. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Yoo, Tae-Sic [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2017-01-30

    The development of sustainable advanced nuclear fuel cycles is a long-term goal of the Office of Nuclear Energy’s (DOE-NE) Fuel Cycle Technologies program. The Material Protection, Accounting, and Control Technologies (MPACT) campaign is supporting research and development (R&D) of advanced instrumentation, analysis tools, and integration methodologies to meet this goal (Miller, 2015). This advanced R&D is intended to facilitate safeguards and security by design of fuel cycle facilities. The lab-scale demonstration of a virtual facility, distributed test bed, that connects the individual tools being developed at National Laboratories and university research establishments, is a key program milestone for 2020. These tools will consist of instrumentation and devices as well as computer software for modeling, simulation and integration.

  20. Application of nonlocal plasma technology for controlling plasma conductivity

    Science.gov (United States)

    Yuan, Chengxun; Demidov, V. I.; Kudryavtsev, A. A.; Kurlyandskaya, I. P.; Rudakova, T. V.; Zhou, Z. X.

    2017-10-01

    A promising approach for better control of the plasma parameters involves the exploitation of peculiarities of plasmas with a nonlocal electron energy distribution. Nonlocal plasma technology (NLP-technology) is based on the effect of energetic electrons in the plasma volume. In this work, an experimental study of influence of the chemo-ionization processes on non-stationary plasma conductivity has been conducted. Due to energetic, supra-thermal electrons, which appear in the chemo-ionization reactions, the highly non-equilibrium and time dependent nonlocal electron energy distribution function is formed. In such a plasma thermal electrons always have positive conductivity (mobility), while supra-thermal, energetic electrons may have negative conductivity in heavy (argon, krypton and xenon) noble gases dependently on conditions. Experiments demonstrate that this effect may lead to the non-monotonic temporal behavior of plasma conductivity and may potentially create the negative electron mobility.

  1. Material Protection, Accounting, and Control Technologies (MPACT) Advanced Integration Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Durkee, Joe W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Cipiti, Ben [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Demuth, Scott Francis [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Fallgren, Andrew James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Jarman, Ken [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Li, Shelly [Argonne National Lab. (ANL), Argonne, IL (United States); Meier, Dave [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Miller, Mike [Argonne National Lab. (ANL), Argonne, IL (United States); Osburn, Laura Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Pereira, Candido [Argonne National Lab. (ANL), Argonne, IL (United States); Dasari, Venkateswara Rao [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ticknor, Lawrence O. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Yoo, Tae-Sic [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-09-30

    The development of sustainable advanced nuclear fuel cycles is a long-term goal of the Office of Nuclear Energy’s (DOE-NE) Fuel Cycle Technologies program. The Material Protection, Accounting, and Control Technologies (MPACT) campaign is supporting research and development (R&D) of advanced instrumentation, analysis tools, and integration methodologies to meet this goal (Miller, 2015). This advanced R&D is intended to facilitate safeguards and security by design of fuel cycle facilities. The lab-scale demonstration of a virtual facility, distributed test bed, that connects the individual tools being developed at National Laboratories and university research establishments, is a key program milestone for 2020. These tools will consist of instrumentation and devices as well as computer software for modeling, simulation and integration.

  2. Implementation of Autonomous Control Technology for Plant Growth Chambers

    Science.gov (United States)

    Costello, Thomas A.; Sager, John C.; Krumins, Valdis; Wheeler, Raymond M.

    2002-01-01

    The Kennedy Space Center has significant infrastructure for research using controlled environment plant growth chambers. Such research supports development of bioregenerative life support technology for long-term space missions. Most of the existing chambers in Hangar L and Little L will be moved to the new Space Experiment Research and Processing Laboratory (SERPL) in the summer of 2003. The impending move has created an opportunity to update the control system technologies to allow for greater flexibility, less labor for set-up and maintenance, better diagnostics, better reliability and easier data retrieval. Part of these improvements can be realized using hardware which communicates through an ethernet connection to a central computer for supervisory control but can be operated independently of the computer during routine run-time. Both the hardware and software functionality of an envisioned system were tested on a prototype plant growth chamber (CEC-4) in Hangar L. Based upon these tests, recommendations for hardware and software selection and system design for implementation in SERPL are included.

  3. Disruptive technology for vector control: the Innovative Vector Control Consortium and the US Military join forces to explore transformative insecticide application technology for mosquito control programmes.

    Science.gov (United States)

    Knapp, Jennifer; Macdonald, Michael; Malone, David; Hamon, Nicholas; Richardson, Jason H

    2015-09-26

    Malaria vector control technology has remained largely static for decades and there is a pressing need for innovative control tools and methodology to radically improve the quality and efficiency of current vector control practices. This report summarizes a workshop jointly organized by the Innovative Vector Control Consortium (IVCC) and the Armed Forces Pest Management Board (AFPMB) focused on public health pesticide application technology. Three main topics were discussed: the limitations with current tools and techniques used for indoor residual spraying (IRS), technology innovation to improve efficacy of IRS programmes, and truly disruptive application technology beyond IRS. The group identified several opportunities to improve application technology to include: insuring all IRS programmes are using constant flow valves and erosion resistant tips; introducing compression sprayer improvements that help minimize pesticide waste and human error; and moving beyond IRS by embracing the potential for new larval source management techniques and next generation technology such as unmanned "smart" spray systems. The meeting served to lay the foundation for broader collaboration between the IVCC and AFPMB and partners in industry, the World Health Organization, the Bill and Melinda Gates Foundation and others.

  4. Analysis of the environmental control technology for oil shale development

    Energy Technology Data Exchange (ETDEWEB)

    de Nevers, N.; Eckhoff, D.; Swanson, S.; Glenne, B.; Wagner, F.

    1978-02-01

    The environmental control technology proposed in the various oil shale projects which are under development are examined. The technologies for control of air pollution, water pollution, and for the disposal, stabilization, and vegetation of the processed shale were thoroughly investigated. Although some difficulties may be encountered in any of these undertakings, it seems clear that the air and water pollution problems can be solved to meet any applicable standard. There are no published national standards against which to judge the stabilization and vegetation of the processed shale. However, based on the goal of producing an environmentally and aesthetically acceptable finished processed shale pile, it seems probable that this can be accomplished. It is concluded that the environmental control technology is available to meet all current legal requirements. This was not the case before Colorado changed their applicable Air Pollution regulations in August of 1977; the previous ones for the oil shale region were sufficiently stringent to have caused a problem for the current stage of oil shale development. Similarly, the federal air-quality, non-deterioration regulations could be interpreted in the future in ways which would be difficult for the oil shale industry to comply with. The Utah water-quality, non-deterioration regulations could also be a problem. Thus, the only specific regulations which may be a problem are the non-deterioration parts of air and water quality regulations. The unresolved areas of environmental concern with oil shale processing are mostly for the problems not covered by existing environmental law, e.g., trace metals, polynuclear organics, ground water-quality changes, etc. These may be problems, but no evidence is yet available that these problems will prevent the successful commercialization of oil shale production.

  5. New technology in digital signal controllers, study & applications

    Directory of Open Access Journals (Sweden)

    Jaime Fonseca Beltrán

    2012-05-01

    Full Text Available This paper addresses the new technologies of digital signal controllers (DSC, is a general reference of the different companies making this type of device, in order that the reader has a general idea of the various products available market, highlighting thedifferences it with its predecessors, so as to identify in a clear and precise differences. This work was conceived in order to provide the user, a transition in the management of PIC ® microcontrollers general purpose, to the management of advanced microcontrollerssuch as the dsPIC., Same to be found from the use of general purpose, even those who have special features designed to more specialized applications.

  6. Facts about Type 2

    Medline Plus

    Full Text Available ... Membership Please Join Us in the Fight for a Cure Your tax-deductible gift today can fund ... A A Listen En Español Facts About Type 2 Type 2 diabetes is the most common form ...

  7. Facts & Impacts, 2003.

    Science.gov (United States)

    Columbia Basin Coll., Pasco, WA.

    This fact book for Columbia Basin College (CBC), Washington, opens with a message from CBC's president and a mission statement. CBC serves over 13,000 students and offers associate degrees in arts and science, as well as applied science. The document also offers information regarding staff and faculty profiles for 2002, degrees awarded, top 5 hot…

  8. Ethanol Basics (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2015-01-01

    Ethanol is a widely-used, domestically-produced renewable fuel made from corn and other plant materials. More than 96% of gasoline sold in the United States contains ethanol. Learn more about this alternative fuel in the Ethanol Basics Fact Sheet, produced by the U.S. Department of Energy's Clean Cities program.

  9. NASA Facts, The Countdown.

    Science.gov (United States)

    National Aeronautics and Space Administration, Washington, DC.

    This pamphlet describes the preparations for launching a giant Atlas, Gemini (Titan 11), or Saturn launch vehicle. The material is intended for use in elementary general science. The pamphlet is one of the NASA Facts Science Series (each of which consists of four pages) and is designed to fit in the standard size three-ring notebook. Review…

  10. NASA Facts, Weightlessness.

    Science.gov (United States)

    National Aeronautics and Space Administration, Washington, DC.

    Weightlessness and how it can be artificially produced is described in this pamphlet written for junior high school students. The pamphlet is one of the NASA Facts Science Series (each of which consists of four pages) and is designed to fit in the standard size three-ring notebook. Review questions, suggested activities, and references are…

  11. Facts about Type 2

    Medline Plus

    Full Text Available ... Alert Day Diabetes Basics Home Symptoms Diagnosis America's Diabetes Challenge Type 1 Type 2 Facts About Type 2 Enroll in ... Where Do I Begin With Type2? Living With Type 1 Diabetes Enroll in the Living WIth Type 2 Diabetes ...

  12. NASA Facts, Solar Cells.

    Science.gov (United States)

    National Aeronautics and Space Administration, Washington, DC.

    The design and function of solar cells as a source of electrical power for unmanned space vehicles is described in this pamphlet written for high school physical science students. The pamphlet is one of the NASA Facts Science Series (each of which consists of four pages) and is designed to fit in the standard size three-ring notebook. Review…

  13. Diet myths and facts

    Science.gov (United States)

    ... yourself to healthy snacks such as low-fat yogurt or baby carrots. MYTH? You cannot be overweight and healthy. FACT: There are some people who are overweight with healthy blood pressure, cholesterol, and blood sugar levels. For most people, excess ...

  14. Respirator Fact Sheet

    Science.gov (United States)

    ... wear the escape hood and get the expected protection? Respirator Fact Sheet [PDF - 706 KB] Follow NIOSH Facebook Flickr Pinterest Twitter ... PDF, DOC, PPT, MPEG) on this site? Adobe PDF file Microsoft PowerPoint file Microsoft Word ... last updated: June 6, 2014 Content source: National Institute for Occupational Safety and Health Education ...

  15. Facts about Vitamin K

    Science.gov (United States)

    Facts about Vitamin K 1 R. Elaine Turner and Wendy J. Dahl 2 FCS8666 Figure 1. Vitamin K is mostly found in vegetables, especially green ... ColognePhotos/iStock/Thinkstock, © ColognePhotos Why do we need vitamin K? Vitamin K is one of the fat- ...

  16. Facts about Vitamin C

    Science.gov (United States)

    Facts about Vitamin C 1 Linda B. Bobroff and Isabel Valentín-Oquendo 2 FCS8702 Why do we need vitamin C? Vitamin C, also known as ascorbic acid, has a ... keep body tissues and the immune system healthy. Vitamin C also helps the body absorb iron from ...

  17. Facts about Type 2

    Medline Plus

    Full Text Available ... Patient Education Materials — Taking Care of Type 2 Diabetes This two-page introduction to type 2 diabetes is in ... Forecast® magazine: lp-type-2, In this section Diabetes Basics Type 2 Facts About Type 2 Recently Diagnosed Treatment and ...

  18. Nuclear fact book

    Energy Technology Data Exchange (ETDEWEB)

    Hill, O. F.; Platt, A. M.; Robinson, J. V. [comps

    1983-05-01

    This reference provides significant highlights and summary facts in the following areas: general energy; nuclear energy; nuclear fuel cycle; uranium supply and enrichment; nuclear reactors; spent fuel and advanced repacking concepts; reprocessing; high-level waste; gaseous waste; transuranic waste; low-level waste; remedial action; transportation; disposal; radiation information; environment; legislation; socio-political aspects; conversion factors; and a glossary. (GHT)

  19. Gun Sales. Firearm Facts.

    Science.gov (United States)

    Duker, Laurie, Ed.

    Minimal federal regulations on firearm sales have facilitated the proliferation of guns, gun owners, and gun dealers in the United States. This fact sheet offers data on the growing number of firearm dealers, the relative ease of obtaining and keeping a license to sell guns from the Federal Bureau of Alcohol, Tobacco, and Firearms, the lack of…

  20. Mastering the Multiplication Facts

    Science.gov (United States)

    D'Ettorre, Jenna

    2009-01-01

    The purpose of this paper is to share the results of a six-week research project (after baseline data was collected) that focused on three different strategies (flashcards, interactive games, and music) and their effectiveness in helping fifth grade students memorize the basic multiplication facts. Many teachers face a serious problem when their…

  1. Facts about Omphalocele

    Science.gov (United States)

    ... label> Information For… Media Policy Makers Facts about Omphalocele Language: English (US) Español (Spanish) Recommend on ... hardly ever is open or broken. What is Omphalocele? Omphalocele, also known as exomphalos, is a birth ...

  2. Analysis of the environmental control technology for tar sand development

    Energy Technology Data Exchange (ETDEWEB)

    de Nevers, N.; Glenne, B.; Bryner, C.

    1979-06-01

    The environmental technology for control of air pollution, water pollution, and for the disposal, stabilization, and vegetation of the waste tar sand were thoroughly investigated. Although some difficulties may be encountered in any of these undertakings, it seems clear that the air and water pollution problems can be solved to meet any applicable standard. Currently there are two large-scale plants producing liquid fuels from tar sands in Alberta, Canada which use similar technology involving surface mining, hot water extraction, and surface disposal of waste sand. These projects all meet the Canadian environmental control regulations in force at the time they began. The largest US deposits of tar sands are much smaller than the Canadian; 95 percent are located in the state of Utah. Their economics do not appear as attractive as the Canadian deposits. The environmental control costs are not large enough to make an otherwise economic project uneconomic. The most serious environmental conflict likely to occur over the recovery of liquid fuels from the US deposits of tar sands is that caused by the proximity of the deposits to national parks, national monuments, and a national recreation area in Utah. These areas have very stringent air pollution requirements; and even if the air pollution control requirements can be met, there may still be adequate opposition to large-scale mining ventures in these areas to prevent their commercial exploitation. Another environmental constraint may be water rights availability.Essentially all of the water running in the Colorado river basin is now legally allocated. Barring new interpretations of the legality of water rights purchase, Utah tar sands developments should be able to obtain water by purchasing existing irrigation water rights.

  3. Viewing and controlling a mobile robot with common Web technologies

    Science.gov (United States)

    Colon, Eric; Baudoin, Yvan

    1998-08-01

    Despite enthusiastic researches all over the world, completely autonomous robots are yet today an utopia. But pure teleoperated Robotics System, as generally used in unknown or dangerous environment, have also their limitations and drawbacks. The introduction of a partial autonomy, where appropriate, could greatly enhance the performances of the man-machine systems. The interactive autonomy objective is to hide sophisticated systems behind simple interfaces and to transparently provide help to the user. These principles can be implemented to control a manipulation arm or a mobile vehicle. Telecontrol is generally associated with video images, nevertheless in specific applications or under special circumstances, the images have a poor quality, can be degraded when using the systems or are not available. This implies the introduction of a 3D model that can be used as stand alone or as augmented reality display. Existing internet technologies can be used for interfacing the real and the virtual worlds. VRML provides the 3D aspects, Java is the unifying language between different computer system, browsers and plug-ins are completing the team. Using these technologies we have developed a multi client/server application to remotely view and control a mobile robot. In this paper we give the description of this application and we provide a basic presentation of the tools.

  4. Method of technological control of proportional electromagnets for control systems of their production

    Science.gov (United States)

    Lankin, A. M.; Lankin, M. V.; Lankina, M. Y.

    2017-02-01

    This article describes the algorithm of the method of technological control of proportional solenoids to control their production process. An important element in the process of production of proportional solenoids is to identify deviations from the nominal mode of its occurrence. This situation shows the relevance of developing a method of technological control of proportional solenoids providing information on process control in a short time. The proposed algorithm consists of four steps: measuring the dynamic characteristics of the magnetization of electromagnet testing, the use of principal component analysis to reduce the dimension of the analyzed information, the classification of products by the condition and sub-standards, the definition of the numerical values of the manufacturing process variations using a calibration method. This approach allows us to determine the type and the degree of impairment of the mode of the process that will lead to effective management of the production process of the electromagnetic actuators.

  5. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... with Alzheimer's >> Home Text size: A A A 2017 Alzheimer's Disease Facts and Figures Download the Full Report: Download the Infographic: English Spanish Share the facts: Quick Facts Prevalence Mortality Caregivers ...

  6. Brain Aneurysm Statistics and Facts

    Science.gov (United States)

    ... Statistics and Facts A- A A+ Brain Aneurysm Statistics and Facts An estimated 6 million people in ... Understanding the Brain Warning Signs/ Symptoms Brain Aneurysm Statistics and Facts Seeking Medical Attention Risk Factors Aneurysm ...

  7. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... Home Text size: A A A 2017 Alzheimer's Disease Facts and Figures Download the Full Report: Download the Infographic: English Spanish Share the facts: Quick Facts Prevalence Mortality Caregivers Costs Special Report Alzheimer's in each state Quick ...

  8. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... Text size: A A A 2017 Alzheimer's Disease Facts and Figures Download the Full Report: Download the ... Costs Special Report Alzheimer's in each state Quick Facts Share the facts: Prevalence The number of Americans ...

  9. Facts about Measles for Adults

    Science.gov (United States)

    ... a Glance Adolescent Vaccination Recommendation: MMR About Measles Facts about Measles for Adults What is measles? Measles ... are pregnant or severely immunosuppressed. Disease and vaccine facts FACT: Measles can be prevented with a safe ...

  10. Interoperability for Space Mission Monitor and Control: Applying Technologies from Manufacturing Automation and Process Control Industries

    Science.gov (United States)

    Jones, Michael K.

    1998-01-01

    Various issues associated with interoperability for space mission monitor and control are presented in viewgraph form. Specific topics include: 1) Space Project Mission Operations Control Architecture (SuperMOCA) goals and methods for achieving them; 2) Specifics on the architecture: open standards ad layering, enhancing interoperability, and promoting commercialization; 3) An advertisement; 4) Status of the task - government/industry cooperation and architecture and technology demonstrations; and 5) Key features of messaging services and virtual devices.

  11. Performance of active vibration control technology: the ACTEX flight experiments

    Science.gov (United States)

    Nye, T. W.; Manning, R. A.; Qassim, K.

    1999-12-01

    This paper discusses the development and results of two intelligent structures space-flight experiments, each of which could affect architecture designs of future spacecraft. The first, the advanced controls technology experiment I (ACTEX I), is a variable stiffness tripod structure riding as a secondary payload on a classified spacecraft. It has been operating well past its expected life since becoming operational in 1996. Over 60 on-orbit experiments have been run on the ACTEX I flight experiment. These experiments form the basis for in-space controller design problems and for concluding lifetime/reliability data on the active control components. Transfer functions taken during the life of ACTEX I have shown consistent predictability and stability in structural behavior, including consistency with those measurements taken on the ground prior to a three year storage period and the launch event. ACTEX I can change its modal characteristics by employing its dynamic change mechanism that varies preloads in portions of its structure. Active control experiments have demonstrated maximum vibration reductions of 29 dB and 16 dB in the first two variable modes of the system, while operating over a remarkable on-orbit temperature range of -80 °C to 129 °C. The second experiment, ACTEX II, was successfully designed, ground-tested, and integrated on an experimental Department of Defense satellite prior to its loss during a launch vehicle failure in 1995. ACTEX II also had variable modal behavior by virtue of a two-axis gimbal and added challenges of structural flexibility by being a large deployable appendage. Although the loss of ACTEX II did not provide space environment experience, ground testing resulted in space qualifying the hardware and demonstrated 21 dB, 14 dB, and 8 dB reductions in amplitude of the first three primary structural modes. ACTEX II could use either active and/or passive techniques to affect vibration suppression. Both experiments trailblazed

  12. Towards the Gigantic: Entification and Standardization as Technologies of Control

    Directory of Open Access Journals (Sweden)

    Petter G. Almklov

    2012-12-01

    Full Text Available This paper is based on studies of how standardized entities work as elements in a regime to control risk and hazardous work. Drawing on empirical examples from the petroleum industry and infrastructure sectors, we illustrate not only the mech-anisms by which particular modes of entification are involved in regimes of con-trol but also their shortcomings and seductive powers as representations. We show how the world is semantically captured and organized to consist of controllable standardized entities by the organizational regimes in the industries we have stud-ied. This mode of entification is particularly effective in providing transcontextual mobility, as the registered entities can enter the ever-expanding information infra-structures of modernity. Although information infrastructures comprise the stand-ards regulating communication, they commonly materialize in information and communication technologies (ICT that provide an increasing number of effective and ubiquitous pathways through which standardized semantic signs can move and have effects. This is a core concern in the increasing focus on management by detailed regimes of accountability, measurement and standardization seen in most modern organizations. These developments, combined with the representational shortcomings of the standardized entifications, lead to a movement towards the gigantic. An ever-increasing number of signs with increasingly higher granularity are produced in order to control an ever-elusive non-entified world.

  13. Effects of Aftermarket Control Technologies on Gas and ...

    Science.gov (United States)

    Particulate matter (PM) originating from diesel combustion is a public health concern due to its association with adverse effects on respiratory and cardiovascular diseases and lung cancer. This study investigated emissions from three stationary diesel engines (gensets) with varying power output (230 kW, 400 kW, and 600 kW) at 50% and 90% load to determine concentrations of gaseous (GROS) and PM reactive oxygen species (PMROS). In addition, the influence of three modern emission control technologies on ROS emissions was evaluated: active and passive diesel particulate filters (A-DPF and P-DPF) and a diesel oxidation catalyst (DOC). PMROS made up 30-50% of the total ROS measured without aftermarket controls. All applied controls removed PMROS by more than 75% on average. However, the oxidative potential of PM downstream of these devices was not diminished at the same rate and particles surviving the A-PDF had an even higher oxidative potential on a per PM mass basis compared to the particles emitted by uncontrolled gensets. Further, the GROS as compared to PMROS emissions were not reduced with the same efficiency (<36%). GROS concentrations were highest with the DOC in use, indicating continued formation of GROS with this control. Correlation analyses showed that PMROS and to a lesser extent GROS have a good correlation with semi-volatile organic carbon (OC1) sub-fraction. In addition, results suggest that chemical composition, rather than PM size, is re

  14. Control technology in supply systems. 3. ed. Regelungstechnik in der Versorgungstechnik

    Energy Technology Data Exchange (ETDEWEB)

    Bach, H. (Fachhochschule Giessen-Friedberg, Giessen (Germany)); Baumgarth, S. (Fachhochschule Braunschweig-Wolfenbuettel, Wolfenbuettel (Germany)); Forsch, K. (Fachhochschule des Landes Rheinland-Pfalz, Trier (Germany)); Reeker, J. (Fachhochschule Muenster (Germany)); Krinninger, H. (Fachhochschule Muenchen (Germany)); Ruosch, E. (Zentralschweizerisches Technikum, Luzern (Switzerland)); Schaefer,

    1992-01-01

    The textbook presents the theoretical fundamentals and practical examples of control technology in supply systems. Practical examples of the fields of heating, air conditioning, and gas supply are presented in detail. The book comprises the following chapters: 1. Introduction to control technology; 2. steady state and time behaviour of control loop elements; 3. controlled systems; 4. control equipment; 5. control elements; 6. closed loops; 7. preset control; 8. meshed control loops; 9. digital control technology; 10. central control systems for supply systems of buildings; 11. examples of supply systems control. (orig.).

  15. Basic Aspects of Deep Soil Mixing Technology Control

    Science.gov (United States)

    Egorova, Alexandra A.; Rybak, Jarosław; Stefaniuk, Damian; Zajączkowski, Przemysław

    2017-10-01

    Improving a soil is a process of increasing its physical/mechanical properties without changing its natural structure. Improvement of soil subbase is reached by means of the knitted materials, or other methods when strong connection between soil particles is established. The method of DSM (Deep Soil Mixing) columns has been invented in Japan in 1970s. The main reason of designing cement-soil columns is to improve properties of local soils (such as strength and stiffness) by mixing them with various cementing materials. Cement and calcium are the most commonly used binders. However new research undertaken worldwide proves that apart from these materials, also gypsum or fly ashes can also be successfully implemented. As the Deep Soil Mixing is still being under development, anticipating mechanical properties of columns in particular soils and the usage of cementing materials in formed columns is very difficult and often inappropriate to predict. That is why a research is carried out in order to find out what binders and mixing technology should be used. The paper presents several remarks on the testing procedures related to quality and capacity control of Deep Soil Mixing columns. Soil improvement methods, their advantages and limitations are briefly described. The authors analyse the suitability of selected testing methods on subsequent stages of design and execution of special foundations works. Chosen examples from engineering practice form the basis for recommendations for the control procedures. Presented case studies concerning testing the on capacity field samples and laboratory procedures on various categories of soil-cement samples were picked from R&D and consulting works offered by Wroclaw University of Science and Technology. Special emphasis is paid to climate conditions which may affect the availability of performing and controlling of DSM techniques in polar zones, with a special regard to sample curing.

  16. Biomolecular Science (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2012-04-01

    A brief fact sheet about NREL Photobiology and Biomolecular Science. The research goal of NREL's Biomolecular Science is to enable cost-competitive advanced lignocellulosic biofuels production by understanding the science critical for overcoming biomass recalcitrance and developing new product and product intermediate pathways. NREL's Photobiology focuses on understanding the capture of solar energy in photosynthetic systems and its use in converting carbon dioxide and water directly into hydrogen and advanced biofuels.

  17. Honda Civic fact sheet

    Energy Technology Data Exchange (ETDEWEB)

    NREL

    1999-05-01

    The U.S. Department of Energy (DOE) is promoting the use of alternative fuels and alternative fuel vehicles (AFVs). The National Renewable Energy Laboratory (NREL) has been directed to conduct projects to evaluate the performance and acceptability of light-duty AFVs. This fact sheet describes the test results on 1998 Honda Civics: one dedicated CNG and a gasoline model as closely matched as possible.

  18. Faith, Fact, and Behaviorism.

    Science.gov (United States)

    Staddon, J E R

    2013-01-01

    David Hume argued that ought cannot be derived from is. That is, no set of facts, no amount of scientific knowledge, is by itself sufficient to urge us to action. Yet generations of well-meaning scientists (more and more as secular influences grow in the West) seem to have forgotten Hume's words of wisdom. All motivated action depends ultimately on beliefs that cannot be proved by the methods of science, that is, on faith.

  19. The Impact of Technology on the Command, Control, and Organizational Structure of Insurgent Groups

    Science.gov (United States)

    2005-06-17

    THE IMPACT OF TECHNOLOGY ON THE COMMAND, CONTROL, AND ORGANIZATIONAL STRUCTURE OF INSURGENT GROUPS A thesis presented to the...CONTRACT NUMBER 5b. GRANT NUMBER 4. TITLE AND SUBTITLE THE IMPACT OF TECHNOLOGY ON THE COMMAND, CONTROL, AND ORGANIZATIONAL STRUCTURE OF...Kevin C. Leahy Thesis Title: The Impact of Technology on the Command, Control, and Organizational Structure of Insurgent Groups Approved by

  20. How to Read a Nutrition Facts Label

    Medline Plus

    Full Text Available ... Cope With a Parent's Suicide? How to Read a Nutrition Facts Label (Video) KidsHealth > For Parents > How ... For Teens For Kids For Parents MORE ON THIS TOPIC Keeping Portions Under Control Figuring Out Food ...

  1. IAQ control in nursing homes using integrated desiccant technology

    Energy Technology Data Exchange (ETDEWEB)

    Cohen, B.M. [Engelhard ICC, Philadelphia, PA (United States); Miyauchi, Hikoo [Nichimen Engine Sales, Tokyo (Japan)

    1996-07-01

    The demographics of the Japanese population indicate a need to provide a greater degree of elderly care, largely due to the long life expectancy of the Japanese people. It is explained that in response to this need Japan has embarked upon a dramatic programme to construct 5000 facilities by the year 2001. Air conditioning requirements of the elderly are somewhat different than those for other facilities and present an opportunity for the use of specialized equipment that will satisfy those requirements. A new facility care unit for the elderly has been built in Nagano, Japan and will start operation at the end of 1996. A new desiccant air conditioning unit designed for this facility is described. It combines humidity control of a desiccant sub-system and the thermal control of a conventional chiller in a single air-handling system. Regeneration of the desiccant is realized by a propane boiler at 88C, which also supplies heat in winter. It is emphasized that this new and exciting approach to air conditioning will change the expectations of society about indoor air quality and comfort control, which have been governed by the use of conventional equipment only, together with its inherent limitations. Other potential applications of desiccant technology are in supermarkets, industrial spaces, Pachinko halls, etc.

  2. Urban drainage control applying rational method and geographic information technologies

    Science.gov (United States)

    Aldalur, Beatriz; Campo, Alicia; Fernández, Sandra

    2013-09-01

    The objective of this study is to develop a method of controlling urban drainages in the town of Ingeniero White motivated by the problems arising as a result of floods, water logging and the combination of southeasterly and high tides. A Rational Method was applied to control urban watersheds and used tools of Geographic Information Technology (GIT). A Geographic Information System was developed on the basis of 28 panchromatic aerial photographs of 2005. They were georeferenced with control points measured with Global Positioning Systems (basin: 6 km2). Flow rates of basins and sub-basins were calculated and it was verified that the existing open channels have a low slope with the presence of permanent water and generate stagnation of water favored by the presence of trash. It is proposed for the output of storm drains, the use of an existing channel to evacuate the flow. The solution proposed in this work is complemented by the placement of three pumping stations: one on a channel to drain rain water which will allow the drain of the excess water from the lower area where is located the Ingeniero White city and the two others that will drain the excess liquid from the port area.

  3. Survey of environmental-control technologies for industrial coal use

    Energy Technology Data Exchange (ETDEWEB)

    Seward, W.H.; Hollis, J.R.; Opalanko, R.S.

    1978-12-01

    This report presents the results of a screening study done by Mittelhauser Corporation for Argonne National Laboratory. The purpose of the study is to examine current and possible future constraints on the use of coal and coal-derived fuels in industry. Current environmental regulations pertaining to industrial fuel usage are listed and summarized. A Technology-Applications Matrix (TAM), which correlates generic types of industrial fuel-burning equipment with potential fuels, is a key element in this report. The study has led to several conclusions. Current environmental constraints may reduce significantly the attractiveness of coal-derived solid fuels. Coal-derived medium-Btu gases and methanol are unlikely to be economically competitive with natural gas, fuel oil, or other coal-derived synthetic fuels by 1985. It is unlikely that National Energy Act provisions, which force conversion of industrial facilities to coal-use, will be effective in changing the industrial fuel-use pattern in the United States in the near future. The most attractive application of coal technology in the industrial sector appears to be direct use of high-sulfur coal with post-combustion pollution control. It is recommended that this alternative be examined, along with the use of atmospheric fluidized-bed combustion, coal-oil mixtures, solvent-refined coal liquids, and high-Btu synthetic gas.

  4. Research, development and technological innovation of wind turbine control systems; Investigacion, desarrollo e innovacion tecnologica de sistemas de control de aerogeneradores

    Energy Technology Data Exchange (ETDEWEB)

    Garduno Ramirez, Raul; Rodriguez Martinez, Arnulfo Antelmo; Sanchez Parra, Marino; Martinez Morales, Miguel Angel; Hernandez Cuellar, Maria Aurora; Alcaide Godinez, Indira Xochiquetzal; Re Lopez, Victor Genaro; Hernandez Gonzalez, Roberto [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2012-07-01

    Control systems constitute the brain and the nervous system of modern machines, such as wind turbine generators (TGE by its acronym in Spanish). TGEs can work efficiently, safely and almost autonomously, thanks to the control systems with which they are equipped. Conversely, any malfunctioning of the control system may cause failure or damage of a component, a subsystem or even destruction of the TGE itself. This paper introduces some basic facts about generation of electric power from wind energy in the world and Mexico, wind turbogenerators and their most relevant technologies, TGE control systems, and R and TD+I about TGE control systems performed at the Instituto de Investigaciones Electricas. [Spanish] Los sistemas de control constituyen el cerebro y el sistema nervioso de las maquinas modernas, como aerogeneradores (AG). Los AG pueden trabajar eficiente, segura y casi autonomamente, gracias a los sistemas de control con los que estan equipados. De manera inversa, cualquier mal funcionamiento del sistema de control puede provocar falla o dano de un componente, subsistema o incluso la destruccion del propio AG. Este documento introduce algunos hechos basicos en torno a la generacion de energia electrica a partir de energia eolica en el mundo y Mexico, los aerogeneradores y sus tecnologias mas importantes, sistemas de control de AG e I+DT alrededor de los sistemas de control de AG realizados en el Instituto de Investigaciones Electricas.

  5. Chernobyl: the facts

    Energy Technology Data Exchange (ETDEWEB)

    Stanbridge, R. (Stockholm Univ. (Sweden) Dept. of Journalism, Media and Communication Studies)

    1993-08-01

    In these Search Strategies, searchers from different countries and professions are given a question to answer, a budget of Pounds 50 and a time in which to produce their report. We hope that these blow-by-blow accounts, together with the hints and tips picked up along the way, will help readers to develop their own search strategies. Journalists are more and more coming to use online services and here the author gives a journalist's account of tracking down the elusive facts surrounding the Chernobyl disaster. (author).

  6. Arteriosclerosis: facts and fancy.

    Science.gov (United States)

    Fishbein, Michael C; Fishbein, Gregory A

    2015-01-01

    Arterial vascular diseases comprise the leading cause of death in the industrialized world. Every physician learns about the pathology of these diseases in medical school. All pathologists evaluate arterial disease in surgical pathology and/or autopsy specimens. All clinicians encounter patients with clinical manifestations of these diseases. With such a common and clinically-important group of entities one would think there would be a general understanding of the "known" information that exists. That is, physicians and scientists should be able to separate what is fact and what is fancy. This review article is intended to generate thought in this regard. Copyright © 2015 Elsevier Inc. All rights reserved.

  7. Water: Facts without Myths

    Directory of Open Access Journals (Sweden)

    Marc Henry

    2009-08-01

    Full Text Available Among all the chemical substances available in the universe, water, with its deceptively simple formula H2O, is the most discussed subject either in science or in philosophy [1]. If you are not convinced by this affirmation, a little experiment at no cost may help you change your mind. Just open your favorite web browser and type the word “water” in any search engine. When I have done that using Google, the number of hits was about 682,000,000 (please do not try to read all the pages. In fact, the only words that seem to beat water at this little game are “air” (770,000,000 hits with Google and 3,120,000,000 with Yahoo, and “food” (689,000,000 hits with Google and 3,820,000,000 with Yahoo. Of course this should not be a surprise, as breathing, eating, drinking just mean that you are a living entity. In fact extending the water search to “eau” (French, “wasser” (German, “agua” (Spanish, Portuguese and “acqua” (Italian leads to 978,900,000 hits under Google and 3,426,000,000 hits under Yahoo, showing now that water is about as important as food. After all, as everybody knows, “water is life”, and do we really have to read about one billion documents to know at least what water really is? [...

  8. State-of-the-art report for the instrumentation and control technology based on the nuclear-information technology convergence

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, Kee Choon; Kim, Chang Hwoi; Lee, Dong Young; Lee, Cheol Kwon; Lee, Hyun Chul [KAERI, Daejeon (Korea, Republic of)

    2011-12-15

    As digitalized the instrumentation and control systems in nuclear power plants, in the past that were implemented in an analog system or circuit for monitoring, control and protection, most of the them is implemented in embedded software based on hardware platform. Digital instrumentation and control system hardware platforms and a digital safety systems have developed in Korea. The fundamental technology of the software part of MMIS (Man-Machine Interface System) has achieved the localization. But in order to secure our global competitiveness, in the -based software, the source of the content areas / It is needed to develop core technologies of the software and contents areas based on the nuclear-IT convergence technology. In this report, the IT technology centered for the characteristics of embedded software applied to nuclear power is described. Also state-of-the-art IT technologies that will converge to nuclear power plants are mentioned

  9. NRL Fact Book

    Science.gov (United States)

    1989-04-01

    calculations of molecular properties. He served as a consultant for the Naval Weapons Center, China Lake, between the years of 1965 and 1975, where he...M.A. Howard, USN I I IMIARY OPERAINSI SECURTY AND~ ITR ADMINISTRATION BRANCH SAFETY BRANCH AND PERSONNEL BRANCH 11 1220 I I 1250 Basic...Millimeter-wave technology Ships Electronic Warfare Systems Ships systems development Jamming technology Deception techniques EW antennas Threat simulators

  10. Loss of Control Prevention and Recovery: Onboard Guidance, Control, and Systems Technologies

    Science.gov (United States)

    Belcastro, Christine M.

    2012-01-01

    Loss of control (LOC) is one of the largest contributors to fatal aircraft accidents worldwide. LOC accidents are complex in that they can result from numerous causal and contributing factors acting alone or (more often) in combination. These LOC hazards include vehicle impairment conditions, external disturbances; vehicle upset conditions, and inappropriate crew actions or responses. Hence, there is no single intervention strategy to prevent these accidents. NASA previously defined a comprehensive research and technology development approach for reducing LOC accidents and an associated integrated system concept. Onboard technologies for improved situation awareness, guidance, and control for LOC prevention and recovery are needed as part of this approach. Such systems should include: LOC hazards effects detection and mitigation; upset detection, prevention and recovery; and mitigation of combined hazards. NASA is conducting research in each of these areas. This paper provides an overview of this research, including the near-term LOC focus and associated analysis, as well as preliminary flight system architecture.

  11. Control technology for surface treatment of materials using induction hardening

    Energy Technology Data Exchange (ETDEWEB)

    Kelley, J.B.; Skocypec, R.D. [Sandia National Labs., NM (United States)

    1997-04-01

    In the industrial and automotive industries, induction case hardening is widely used to provide enhanced strength, wear resistance, and toughness in components made from medium and high carbon steels. The process uses significantly less energy than competing batch process, is environmentally benign, and is a very flexible in-line manufacturing process. As such, it can directly contribute to improved component reliability, and the manufacture of high-performance lightweight parts. However, induction hardening is not as widely used as it could be. Input material and unexplained process variations produce significant variation in product case depth and quality. This necessitates frequent inspection of product quality by destructive examination, creates higher than desired scrap rates, and causes de-rating of load stress sensitive components. In addition, process and tooling development are experience-based activities, accomplished by trial and error. This inhibits the use of induction hardening for new applications, and the resultant increase in energy efficiency in the industrial sectors. In FY96, a Cooperative Research and Development Agreement under the auspices of the Technology Transfer Initiative and the Partnership for a New Generation of Vehicles was completed. A multidisciplinary team from Sandia National Labs and Delphi Saginaw Steering Systems investigated the induction hardening by conducting research in the areas of process characterization, computational modeling, materials characterization, and high speed data acquisition and controller development. The goal was to demonstrate the feasibility of closed-loop control for a specific material, geometry, and process. Delphi Steering estimated annual savings of $2-3 million per year due to reduced scrap losses, inspection costs, and machine down time if reliable closed-loop control could be achieved. A factor of five improvement in process precision was demonstrated and is now operational on the factory floor.

  12. Economics of Selected Water Control Technologies and their ...

    African Journals Online (AJOL)

    The typical analysis of technology adoption usually pertains to the choice of competing methods of accomplishing a production or marketing task. For example, crop choice, tillage practice, agro-forestry technologies, soil and water conservation technology and some aspect of natural resource management that are selected ...

  13. Solar Technical Assistance Team (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2012-07-01

    The Solar Technical Assistance Team (STAT) is a team of solar technology and deployment experts who ensure that the best information on policies, regulations, financing, and other issues is getting into the hands of state government decision makers whey they need it. This fact sheet provides information about STAT and the STAT webinar series for the summer of 2012.

  14. EU AND GLOBALIZATION: SOME STYLIZED FACTS

    Directory of Open Access Journals (Sweden)

    Scamuffa Domenico

    2009-05-01

    Full Text Available Most of the people all over the world claim that globalization is a result of dynamic interactions between economic, technological, social and political factors. The aim of this paper is to document some stylized facts on this phenomenon in order to take

  15. Baseline Study Methodology for Future Phases of Research on Nuclear Power Plant Control Room Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Le Blanc, Katya Lee [Idaho National Lab. (INL), Idaho Falls, ID (United States); Bower, Gordon Ross [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hill, Rachael Ann [Idaho National Lab. (INL), Idaho Falls, ID (United States); Spielman, Zachary Alexander [Idaho National Lab. (INL), Idaho Falls, ID (United States); Rice, Brandon Charles [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-07-01

    In order to provide a basis for industry adoption of advanced technologies, the Control Room Upgrades Benefits Research Project will investigate the benefits of including advanced technologies as part of control room modernization This report describes the background, methodology, and research plan for the first in a series of full-scale studies to test the effects of advanced technology in NPP control rooms. This study will test the effect of Advanced Overview Displays in the partner Utility’s control room simulator

  16. Soft Costs Fact Sheet

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-05-01

    This fact sheet is an overview of the systems integration subprogram at the U.S. Department of Energy SunShot Initiative. Soft costs can vary significantly as a result of a fragmented energy marketplace. In the U.S., there are 18,000 jurisdictions and 3,000 utilities with different rules and regulations for how to go solar. The same solar equipment may vary widely in its final installation price due to process and market variations across jurisdictions, creating barriers to rapid industry growth. SunShot supports the development of innovative solutions that enable communities to build their local economies and establish clean energy initiatives that meet their needs, while at the same time creating sustainable solar market conditions.

  17. Crew Exercise Fact Sheet

    Science.gov (United States)

    Rafalik, Kerrie

    2017-01-01

    Johnson Space Center (JSC) provides research, engineering, development, integration, and testing of hardware and software technologies for exercise systems applications in support of human spaceflight. This includes sustaining the current suite of on-orbit exercise devices by reducing maintenance, addressing obsolescence, and increasing reliability through creative engineering solutions. Advanced exercise systems technology development efforts focus on the sustainment of crew's physical condition beyond Low Earth Orbit for extended mission durations with significantly reduced mass, volume, and power consumption when compared to the ISS.

  18. Facts about Type 2

    Medline Plus

    Full Text Available ... or heart. Some people with type 2 can control their blood glucose with healthy eating and being ... 2 Recently Diagnosed Treatment and Care Blood Glucose Control Complications Medication Doctors, Nurses & More Enroll in the ...

  19. Quality control and in-service inspection technology for hybrid-composite girder bridges.

    Science.gov (United States)

    2014-08-01

    This report describes efforts to develop quality control tools and in-service inspection technologies for the fabrication and construction of Hybrid Composite Beams (HCBs). HCBs are a new bridge technology currently being evaluated by the Missouri De...

  20. ECOLOGICAL CONTROL EQUIPMENT AND TECHNOLOGY OF UNDERWATER VEGETATION DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    V. TITINSCHNEIDER

    2008-10-01

    Full Text Available The excess of aquatic submerse vegetation development carries to the reduction of the real rearing area for the piscicultural material from the production farms and allow nestling of the ichthyophages bird species that decrease the fish production. Aquatic submerse vegetation stumble the utilization of aquatic zones for recreation and also wright function of basins utilized for the electric energy production, of micro electricity works through obstruction of the dams grid. The control of the aquatic submerse vegetation development, for Myriophyllum verticillatum, Ceratophyllum submersum, Urticularia vulgaris, Potamogeton natans, Nimphoides peltata species it is accomplish through the removing of some parts of these, preferably with all the stump system. Usually, these its accomplish with the floating equipments fit up with the thermic engines and the propulsion and governating elements who have harm over the fish and some others aquatic organisms through the noise, the displacing a large quality of water caused of propulsion systems and through the noxes elimination (flue, carburant trails, etc.. These technologies reside from the evacuation of the aquatic submerse vegetation and the stump systems of these with the help of an adjustable rake, hang up from the coast by a rope, wrapped to a drummer, who is trained by a motto-propeller group with a small installed power.

  1. Technology and tuberculosis control: the OUT-TB Web experience.

    Science.gov (United States)

    Guthrie, Jennifer L; Alexander, David C; Marchand-Austin, Alex; Lam, Karen; Whelan, Michael; Lee, Brenda; Furness, Colin; Rea, Elizabeth; Stuart, Rebecca; Lechner, Julia; Varia, Monali; McLean, Jennifer; Jamieson, Frances B

    2017-04-01

    Develop a tool to disseminate integrated laboratory, clinical, and demographic case data necessary for improved contact tracing and outbreak detection of tuberculosis (TB). In 2007, the Public Health Ontario Laboratories implemented a universal genotyping program to monitor the spread of TB strains within Ontario. Ontario Universal Typing of TB (OUT-TB) Web utilizes geographic information system (GIS) technology with a relational database platform, allowing TB control staff to visualize genotyping matches and microbiological data within the context of relevant epidemiological and demographic data. OUT-TB Web is currently available to the 8 health units responsible for >85% of Ontario's TB cases and is a valuable tool for TB case investigation. Users identified key features to implement for application enhancements, including an e-mail alert function, customizable heat maps for visualizing TB and drug-resistant cases, socioeconomic map layers, a dashboard providing TB surveillance metrics, and a feature for animating the geographic spread of strains over time. OUT-TB Web has proven to be an award-winning application and a useful tool. Developed and enhanced using regular user feedback, future versions will include additional data sources, enhanced map and line-list filter capabilities, and development of a mobile app.

  2. Adolescent Literacy. Fact Sheet

    Science.gov (United States)

    Alliance for Excellent Education, 2011

    2011-01-01

    The nation's workforce is demanding ever more literate workers and citizens. As technology advances and the American economy grows increasingly knowledge based, individuals must be able to read, write, and communicate at higher levels in order to remain economic and social contributors. A student's level of literacy is a critical determinant of…

  3. Infertility Fact Sheet

    Science.gov (United States)

    ... embryos are then put back in the woman's body. How often is assisted reproductive technology (ART) successful? Success rates vary and depend on many ... vitro fertilization (IVF) means fertilization outside of the body. IVF is the most effective ART. It is often used when a woman's fallopian ...

  4. Application of new technology to SMART instrumentation and control systems

    Energy Technology Data Exchange (ETDEWEB)

    Park, Heui Youn; Lee, C. K.; Kim, D. H.; Suh, Y. S.; Hur, S.; Seong, S. H.; Jang, G. S.; Koo, I. S.; Chang, M. H

    1998-03-01

    It is very important to examine the conformance with licensing requirements and standards when new digital technology and equipment apply to nuclear plants. Key requirements of licensing on digitalisation using new technologies are software and hardware V and V, reliability of communication network, and diversity and defence-in-depth concept against common mode failures of hardware and software. And it should be also evaluated whether the selection and application of new technology comply with the design concept and requirements of SMART MMIS or not. In this report, we reviewed digitalisation materials such as EPRI`s ALWR utility requirements document, I and C upgrade plan, guideline on licensing digital upgrades, and IAEA`s issues and approaches to plant modernization to explore application method on new I and C technologies, and evaluated the state of applicable new technologies for SMART MMIS which are selected from the technologies, methods, and manuals of the industrial area. (author). 36 refs., 15 tabs.

  5. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... Alzheimer's in each state Quick Facts Share the facts: Prevalence The number of Americans living with Alzheimer's disease is growing — and growing fast. An estimated 5.5 million Americans of all ...

  6. Ethanol : separating fact from fiction

    Science.gov (United States)

    1999-08-01

    This fact sheet presents documented information that dispels some of the myths that people have developed about ethanol. Once the facts are revealed, it becomes clear that using and producing ethanol for transportation is good for the country's econo...

  7. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... irrevocable disability occurs. LEARN ABOUT OUR COMMITMENT TO RESEARCH. Read More Alzheimer's Disease Facts in Each State The 2017 Alzheimer's Disease Facts and Figures report contains data on the impact of this disease in every ...

  8. Rubella - Fact Sheet for Parents

    Science.gov (United States)

    ... this page: About CDC.gov . Redirect for the Rubella fact sheet page. The current fact sheet can ... http://www.cdc.gov/vaccines/parents/diseases/child/rubella.html Print page Share Compartir File Formats Help: ...

  9. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... RESEARCH. Read More Alzheimer's Disease Facts in Each State The 2017 Alzheimer's Disease Facts and Figures report ... mail addresses with third parties. Please read our security and privacy policy . Plan ahead Get help and ...

  10. Use the Nutrition Facts Label

    Science.gov (United States)

    ... Features Spokespeople News Archive eNewsletters Calendar Use the Nutrition Facts Label You can help your family eat ... to some of their favorite foods. Use the Nutrition Facts label found on food packages to make ...

  11. 25 CFR 542.16 - What are the minimum internal control standards for information technology?

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false What are the minimum internal control standards for information technology? 542.16 Section 542.16 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.16 What are the minimum internal control standards for information technology? Lin...

  12. 25 CFR 543.16 - What are the minimum internal controls for information technology?

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false What are the minimum internal controls for information technology? 543.16 Section 543.16 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS FOR CLASS II GAMING § 543.16 What are the minimum internal controls for information technology? (...

  13. The Intelligent Control Technology of Manufacturing Execution Process Based on RFID

    Directory of Open Access Journals (Sweden)

    Fan Ruicheng

    2015-01-01

    Full Text Available Intelligent manufacturing is an important trend in the development of the future manufacturing industry, and how to use the current technology to realize the existing traditional manufacturing mode change to the intelligent manufacturing mode need to be studied. Aimed at the implementation of the intelligent manufacturing mode, this paper proposed the intelligent manufacturing execution process control technology based on RFID. The framework of intelligent manufacturing execution process control technology proposed an effective way to realize the manufacturing process intelligent control based on existing MES; the technology of logistics identification and control based on RFID realized the effectiveness control of logistics; the intelligent monitoring technology of mobile terminal solve the mobile terminal positioning problem, MES pushing information to mobile terminal problem and other problems. Finally, the author developed a set of intelligent manufacturing execution process control system which includes RFID reader, MES server, mobile terminal, and verified the effectiveness of the above mentioned technologies.

  14. Facts, values, and journalism.

    Science.gov (United States)

    Gilbert, Susan

    2017-03-01

    At a time of fake news, hacks, leaks, and unverified reports, many people are unsure whom to believe. How can we communicate in ways that make individuals question their assumptions and learn? My colleagues at The Hastings Center and many journalists and scientists are grappling with this question and have, independently, reached the same first step: recognize that facts can't be fully understood without probing their connection to values. "Explaining the basics is important, of course, but we also need to diversify our approach to the coverage of science-particularly as it intersects with the matrix of cultural, religious, social, and political values of our readers," said an article in Undark, an online magazine of science journalism. An editorial in Nature called for scientists to engage directly with citizens in debates over climate change and genome editing, noting that "the ethical issues can be critically dependent on the science, for example, in understanding where the boundaries between non-heritable and heritable genome modifications might be." We're here to help. © 2017 The Hastings Center.

  15. Technology for Space Station Evolution. Volume 5: Structures and Materials/Thermal Control System

    Science.gov (United States)

    1990-01-01

    NASA's Office of Aeronautics and Space Technology (OAST) conducted a workshop on technology for space station evolution on 16-19 Jan. 1990. The purpose of this workshop was to collect and clarify Space Station Freedom technology requirements for evolution and to describe technologies that can potentially fill those requirements. These proceedings are organized into an Executive Summary and Overview and five volumes containing the Technology Discipline Presentations. Volume 5 consists of the technology discipline sections for Structures/Materials and the Thermal Control System. For each technology discipline, there is a level 3 subsystem description, along with papers.

  16. John Searle on Institutional Facts

    Directory of Open Access Journals (Sweden)

    m Abdullahi

    2010-09-01

    Here we argue that the essence of institutional facts is status functions. Humans recognize these functions which contain a set of deontic powers through collective intentionality. Therefore, institutional facts are ontologically subjective and epistemologically objective. Nevertheless, objectivity of institutional facts totally depends on language which itself is a fundamental institution for other institutions.

  17. Wastewater and sludge control-technology options for synfuels industries

    Energy Technology Data Exchange (ETDEWEB)

    Castaldi, F.J.; Harrison, W.; Ford, D.L.

    1981-02-01

    The options examined were those of zero discharge, partial water reuse with restricted discharge of treated effluents, and unrestricted discharge of treated effluents. Analysis of cost data and performance-analyses data for several candidate secondary-wastewater-treatment unit processes indicated that combined activated-sludge/powdered-activated-carbon (AS/PAC) treatment incorporating wet-air-oxidation carbon regeneration is the most cost-effective control technology available for the removal of organic material from slagging, fixed-bed process wastewaters. Bench-scale treatability and organic-constituent removal studies conducted on process quench waters from a pilot-scale, slagging, fixed-bed gasifer using lignite as feedstock indicated that solvent extraction followed by AS/PAC treatment reduces levels of extractable and chromatographable organics to less than 1 ..mu..g/L in the final effluent. Levels of conventional pollutants also were effectively reduced by AS/PAC to the minimum water-quality standards for most receiving waters. The most favored and most cost-effective treatment option is unrestricted discharge of treated effluents with ultimate disposal of biosludges and landfilling of gasifier ash and slag. This option requires a capital expenditure of $8,260,000 and an annual net operating cost of $2,869,000 in 1978 dollars, exclusive of slag disposal. The net energy requirement of 19.6 x 10/sup 6/ kWh/year, or 15.3 kWh/1000 gal treated, is less than 6% of the equivalent energy demand associated with the zero-discharge option.

  18. American export control, technology spillover and innovation of Chinese pharmaceutical Industry.

    Science.gov (United States)

    Hui, Jiang

    2017-05-01

    This paper was aimed to analyze whether the U.S. strict export control to China affects the technological innovation of Chinese pharmaceutical industry. This paper selected the data of technological innovation and the expenditure of high and new technology adoption in China's pharmaceutical industry from 1995 to 2014, created panel regression model to study the impact of export controls on technology spillovers and the impact of technology spillovers on innovation capacity. The results show that US export control has a significant impact on technology spillovers, but foreign technology spillovers have no significant impact on the innovation of Chinese pharmaceutical industry. Although the US export control prevented foreign technology spillovers to China, but indirectly stimulated the domestic technology spillovers to pharmaceutical manufacturing industry in China. Statistical analysis show that the correlation coefficient between innovation capacity and expenditure for high technology adoption is not significant, but the expenditure of purchasing domestic technical is essential to pharmaceutical innovation. This study shows that US export control indirectly, not directly, affected the technological innovation of China's pharmaceutical industry, affected the allocation of innovative resources, but failed to prevent the technological progress and competitiveness improvement of Chinese pharmaceutical industry.

  19. Transmission Control of Transport and Technological Cars in Acceleration Mode

    Directory of Open Access Journals (Sweden)

    B. I. Plujnikov

    2015-01-01

    Full Text Available In most structures a transmission of the transport-technological machine (TTM is controlled by automatic systems. In their creating it is necessary to specify the appropriate parameters and algorithms. In the total balance of the machine run time the acceleration mode is the most important. Therefore, an algorithm of the transmission gear ratio change during acceleration largely provides desirable rating of machines.It is known that the process of acceleration is estimated by its dynamic quality and fuel economy. To reach the best rating of both simultaneously is impossible. Therefore, as the criteria of estimate, were chosen the time and fuel consumption during acceleration to a fixed speed value.From a mathematical point of view, these criteria represent the sum of integrals, each of which defines the time or the fuel consumption during acceleration with a certain transmission gear ratio. The problem is formulated as follows: to determine the speed values of the TTM at the moments when the transmission gear ratio is changed providing the minimum values during fixed fuel supply for the estimate criteria. The latter condition in a certain way limits the task, but in explicit form there is no this control action in the dependence data.Given the variety of possible design options for the TTM, the solution is given by a specific example that simplifies the mathematics and makes it easier to understand the results obtained. As a TTM, is considered a passenger car with petrol engine and automatic transmission, which includes a hydrodynamic transformer and three-speed gearbox.A chosen way of solving the problem involves using the theory of ordinary maxima and minima, which allows finding the unknown values of independent variables. The expressions of sub-integral functions are in explicit form obtained and studied for meeting the necessary and sufficient conditions for existence of the extreme point. The result was a proof that in the case of

  20. Integrated Motion Planning and Autonomous Control Technology for Autonomous ISR Project

    Data.gov (United States)

    National Aeronautics and Space Administration — SSCI and MIT propose to design, implement and test a comprehensive Integrated Mission Planning & Autonomous Control Technology (IMPACT) for Autonomous ISR...

  1. Facts About XLDB-2011

    Energy Technology Data Exchange (ETDEWEB)

    Becla, Jacek; Lim, Kian-Tat; Wang, Daniel L.; /SLAC

    2012-02-22

    This note provides details of the 5th Extremely Large Databases Conference and Invitational Workshop that were held in 2011 on 18-19 October and 20 October, respectively, at the SLAC National Accelerator Laboratory in Menlo Park, California. The main goals of the conference were: (1) Encourage and accelerate the exchange of ideas between users trying to build extremely large databases worldwide and database solution providers; (2) Share lessons, trends, innovations, and challenges related to building extremely large databases; (3) Facilitate the development and growth of practical technologies for extremely large databases; and (4) Strengthen, expand, and engage the XLDB community.

  2. Facts about Type 2

    Medline Plus

    Full Text Available ... Diets Meal Planning for Vegetarian Diets Cook with Heart-Healthy Foods Holiday Meal Planning What Can I ... levels may hurt your eyes, kidneys, nerves or heart. Some people with type 2 can control their ...

  3. Facts about Type 2

    Medline Plus

    Full Text Available ... Up Treatment & Care Blood Glucose Testing Medication Doctors, Nurses & More Oral Health & Hygiene Women A1C Insulin Pregnancy ... and Care Blood Glucose Control Complications Medication Doctors, Nurses & More Enroll in the Living With Type 2 ...

  4. Facts about Type 2

    Medline Plus

    Full Text Available ... EXPO Volunteer Opportunities Sponsorship and Exhibit Opportunities Camp ... can control their blood glucose with healthy eating and being active. But, your doctor may need to also prescribe ...

  5. Facts about Type 2

    Medline Plus

    Full Text Available ... Diagnosed Treatment and Care Blood Glucose Control Complications Medication Doctors, Nurses & More Enroll in the Living With Type 2 Diabetes Program donate en -- Match – Donate Now - match-donate- ...

  6. Clean Cast Steel Technology - Machinability and Technology Transfer

    Energy Technology Data Exchange (ETDEWEB)

    C. E. Bates; J. A. Griffin

    2000-05-01

    There were two main tasks in the Clean Cast Steel Technology - Machinability and Technology Transfer Project. These were (1) determine the processing facts that control the machinability of cast steel and (2) determine the ability of ladle stirring to homogenize ladle temperature, reduce the tap and pouring temperatures, and reduce casting scrap.

  7. Ella-V and technology usage technology usage in an english language and literacy acquisition validation randomized controlled trial study

    OpenAIRE

    Roisin P. Corcoran; Steven M. Ross; Beverly J. Irby; Fuhui Tong; Rafael Lara-Alecio; Cindy Guerrero

    2014-01-01

    This paper describes the use of technology to provide virtual professional development (VPD) for teachers and to conduct classroom observations in a study of English Language Learner (ELL) instruction in grades K–3. The technology applications were part of a cluster randomized control trial (RCT) design for a federally funded longitudinal validation study of a particular program, English Language and Literacy Acquisition-Validation, ELLA- V, to determine its degree of impact on English oral l...

  8. Future Seabasing Technology Analysis: Logistics Command and Control

    National Research Council Canada - National Science Library

    Douglass, C. H

    2006-01-01

    The Center for Naval Analyses (CNA) was tasked by the Office of Naval Research (ONR) to review the Navy's seabasing concept, identify potential operational problems, and propose science and technology...

  9. Biological control and management of the detoxication wastewater treatment technologies

    Directory of Open Access Journals (Sweden)

    Topalova Yana

    2007-01-01

    Full Text Available Detoxication technologies require the combination of theoretical and practical knowledge of xenobiotic biodegradation, wastewater treatment technologies, and management rules. The purpose of this complicated combination is to propose specialized strategies for detoxication, based on lab- and pilot-scale modeling. These strategies include preliminary created algorithms for preventing the risk of water pollution and sediments. The technologies and algorithms are essentially important outcome, applied in the textile, pharmaceutical, cosmetic, woodtreating, and oiltreating industries. In this paper four rehabilitation technologies for pretreatment of water contaminated by pentachlorophenol (PCP have been developed in the frame of the European and Bulgarian National projects. Emphasize is put on the biological systems and their potential of detoxication management. The light and transmission electron microscopy of the reconstructed activated sludges the microbial, kinetic and enzymological indicators are presented and approved as critical points in the biocontrol.

  10. Automated Service Discovery using Autonomous Control Technologies Project

    Data.gov (United States)

    National Aeronautics and Space Administration — With the advent of mobile commerce technologies, the realization of pervasive computing and the formation of ad-hoc networks can be leveraged to the benefit of the...

  11. Manned space station environmental control and life support system computer-aided technology assessment program

    Science.gov (United States)

    Hall, J. B., Jr.; Pickett, S. J.; Sage, K. H.

    1984-01-01

    A computer program for assessing manned space station environmental control and life support systems technology is described. The methodology, mission model parameters, evaluation criteria, and data base for 17 candidate technologies for providing metabolic oxygen and water to the crew are discussed. Examples are presented which demonstrate the capability of the program to evaluate candidate technology options for evolving space station requirements.

  12. Label-controlled optical packet routing technologies and applications

    DEFF Research Database (Denmark)

    Koonen, A.M.J.; Yan, N.; Vegas Olmos, Juan José

    2007-01-01

    An overview is given of various optical packet labeling techniques. The architecture and technologies are discussed for optical packet routing nodes using orthogonal labeling with optoelectronic label processing, and for nodes using time-serial labeling with all-optical time-serial label processing....... An example of a nearterm application is given, and a comparison of routing technologies is made regarding their cost and reliability aspects....

  13. Strain: Fact or Fiction?

    Science.gov (United States)

    Heilbronner, Renée

    2017-04-01

    2017 marks the 50th anniversary of the publication of John Ramsay's well known textbook "Folding and Fracturing of Rocks" - ... and the 30th anniversary of the rejection of a rather less well known paper entitled "Strain: Fact or Fiction?" submitted by Renée Panozzo to the Journal of Structural Geology. The gist of the paper was simple and straight forward: it was argued that not every fabric that can be observed in deformed rocks is necessarily a measure of the amount of strain the rock incurred. A distinction was made between a general "fabric", i.e., the traceable geometry of grain boundaries, for example, and a so-called "strain fabric", i.e., the model geometry that would result from homogeneously straining an initially isotropic fabric and that would exhibit at least orthorhombic symmetry. To verify if a given fabric was indeed a strain fabric it was therefore suggested to use the SURFOR method (published by Panozzo) and to carry out a so-called strain test, i.e., a check of symmetry, before interpreting the results of a fabric analysis in terms of strain. The problem with the paper was that it was very obviously written out of frustration. The frustration came form having reviewed a number of manuscripts which tried to use the then novel SURFOR method for strain analysis without first checking if the the fabric was a indeed a "strain fabric" or not, and then blaming the SURFOR method for producing ambiguous results. As a result, the paper was not exactly well balanced and carefully thought out. It was considered "interesting but not scholarly" by one of the reviewers and down-right offensive by the second. To tell the truth, however, the paper was not formally rejected. The editor Sue Treagus strongly encouraged Panozzo to revise the paper, ... and 30 years later, I will follow her advise and offer a revised paper as a tribute to John Ramsay. To quote from the original manuscript: "We should be a little more impressed that strain works so well, and less

  14. METHODS FOR EVALUATION OF COMPANIES’ INFORMATION SYSTEMS AND TECHNOLOGIES EFFICIENCY AND CONTROL IN TEACHING COURSE "INFORMATION TECHNOLOGY GOVERNANCE"

    Directory of Open Access Journals (Sweden)

    Samchynska Yaroslava

    2014-10-01

    Full Text Available The use of the information systems and technologies in economic activity is called to represent companies’ corporate principles, aims, traditions, to help in realization of the planned strategies, thanks to that the management efficiency and the cost of enterprise increases. Teaching for educational discipline «IT Governance» is directed on a study and research of these intercommunications by students of the 5th course on specialties «Computer Science», «Software Engineering» for educational level Specialist (Past Bachelor Degree, Master degree. The auditing services belong to the actual methods for evaluation of the information systems and technologies efficiency and control, which are studied according to the course «IT Governance». The article deals with the methodological basis of providing auditing services for evaluation of efficiency and control of information systems (technologies for the purpose of satisfaction of growing informational needs of companies and functional activation in their information resources. The main task of auditing services for control of information systems (information communication technologies efficiency is to evaluate independently and objectively if the information technologies provide the necessary services. The basic criteria, data ware, subject and object of audit necessary for drawing up an audit report and assurance declaring are established. The program and a detailed list of auditing procedures for evaluation of efficiency of information systems and technologies have been presented

  15. Optimizing and controlling earthmoving operations using spatial technologies

    Science.gov (United States)

    Alshibani, Adel

    This thesis presents a model designed for optimizing, tracking, and controlling earthmoving operations. The proposed model utilizes, Genetic Algorithm (GA), Linear Programming (LP), and spatial technologies including Global Positioning Systems (GPS) and Geographic Information Systems (GIS) to support the management functions of the developed model. The model assists engineers and contractors in selecting near optimum crew formations in planning phase and during construction, using GA and LP supported by the Pathfinder Algorithm developed in a GIS environment. GA is used in conjunction with a set of rules developed to accelerate the optimization process and to avoid generating and evaluating hypothetical and unrealistic crew formations. LP is used to determine quantities of earth to be moved from different borrow pits and to be placed at different landfill sites to meet project constraints and to minimize the cost of these earthmoving operations. On the one hand, GPS is used for onsite data collection and for tracking construction equipment in near real-time. On the other hand, GIS is employed to automate data acquisition and to analyze the collected spatial data. The model is also capable of reconfiguring crew formations dynamically during the construction phase while site operations are in progress. The optimization of the crew formation considers: (1) construction time, (2) construction direct cost, or (3) construction total cost. The model is also capable of generating crew formations to meet, as close as possible, specified time and/or cost constraints. In addition, the model supports tracking and reporting of project progress utilizing the earned-value concept and the project ratio method with modifications that allow for more accurate forecasting of project time and cost at set future dates and at completion. The model is capable of generating graphical and tabular reports. The developed model has been implemented in prototype software, using Object

  16. \\t Capital Planning and Investment Control (CPIC) for the Management of Information Technology Investments

    Science.gov (United States)

    Capital Planning and Investment Control (CPIC) is the Information Technology (IT) governance and management methodology in use at EPA for selecting, controlling and evaluating the performance of EPA IT investments throughout the full lifecycle.

  17. Technologies of monitoring, alerting and controlling for coal fires in China

    Science.gov (United States)

    Deng, Jun; Xiao, Yang; Luo, Zhen-Min; Zhang, Yan-Ni; Zheng, Xue-Zhao

    2017-04-01

    Coalfield fire has become a global disaster, especially in China, which lost a large number of coal resources every year, and caused serious destruction of ecological environment. Coalfield fire area has become urgent to solve the problem for the complex, combustion long-time, wide range, fire source hidden, and controlling difficultly in the formed evolution process. At present, surface coal fire areas prospecting technology mainly have visible light on surface, surface radar remote sensing technology, air ground integration technology. Detecting hidden fire source technology are infrared thermal imaging technology, method of radon-test. The technologies of monitoring and early warning for fire areas with ad-hoc, intelligent monitoring for infrared thermal imaging real time networks are applied. The idea of district controlling as "prevention-control-extinguishing" is established and in-site applications, which the technologies and equipment of fire prevention and extinguishment include the inorganic filling plugging, liquid carbon dioxide, and series of colloidal materials.

  18. Facts about Type 2

    Medline Plus

    Full Text Available ... Right away, your cells may be starved for energy. Over time, high blood glucose levels may hurt your eyes, kidneys, nerves or heart. Some people with type 2 can control their blood glucose with healthy eating and being active. But, your doctor may need ...

  19. [The technological innovation strategy for quality control of Chinese medicine based on Big Data].

    Science.gov (United States)

    Li, Zhen-hao; Qian, Zhong-zhi; Cheng, Yi-yu

    2015-09-01

    The evolution of the quality control concepts of medical products within the global context and the development of the quality control technology of Chinese medicine are briefly described. Aimed at the bottlenecks in the regulation and quality control of Chinese medicine, using Big Data technology to address the significant challenges in Chinese medicine industry is proposed. For quality standard refinements and internationalization of Chinese medicine, a technological innovation strategy encompassing its methodology, and the R&D direction of the subsequent core technology are also presented.

  20. [A strategy of constructing the technological system for quality control of Chinese medicine based on process control and management].

    Science.gov (United States)

    Cheng, Yi-Yu; Qian, Zhong-Zhi; Zhang, Bo-Li

    2017-01-01

    The current situation, bottleneck problems and severe challenges in quality control technology of Chinese Medicine (CM) are briefly described. It is presented to change the phenomenon related to the post-test as the main means and contempt for process control in drug regulation, reverse the situation of neglecting the development of process control and management technology for pharmaceutical manufacture and reconstruct the technological system for quality control of CM products. The regulation and technology system based on process control and management for controlling CM quality should be established to solve weighty realistic problems of CM industry from the root causes, including backwardness of quality control technology, weakness of quality risk control measures, poor reputation of product quality and so on. By this way, the obstacles from poor controllability of CM product quality could be broken. Concentrating on those difficult problems and weak links in the technical field of CM quality control, it is proposed to build CMC (Chemistry, Manufacturing and Controls) regulation for CM products with Chinese characteristics and promote the regulation international recognition as soon as possible. The CMC technical framework, which is clinical efficacy-oriented, manufacturing manner-centered and process control-focused, was designed. To address the clinical characteristics of traditional Chinese medicine (TCM) and the production feature of CM manufacture, it is suggested to establish quality control engineering for CM manufacturing by integrating pharmaceutical analysis, TCM chemistry, TCM pharmacology, pharmaceutical engineering, control engineering, management engineering and other disciplines. Further, a theoretical model of quality control engineering for CM manufacturing and the methodology of digital pharmaceutical engineering are proposed. A technology pathway for promoting CM standard and realizing the strategic goal of CM internationalization is

  1. 76 FR 46841 - Certain Products Containing Interactive Program Guides and Parental Controls Technology; Notice...

    Science.gov (United States)

    2011-08-03

    ... COMMISSION Certain Products Containing Interactive Program Guides and Parental Controls Technology; Notice of... Video Properties of Santa Clara, California, ] and Index Systems, Inc., of the British Virgin Islands... program guide and parental controls technology by reason of the infringement of certain claims of U.S...

  2. 76 FR 79214 - Certain Products Containing Interactive Program Guide and Parental Controls Technology...

    Science.gov (United States)

    2011-12-21

    ... COMMISSION Certain Products Containing Interactive Program Guide and Parental Controls Technology... Corporation of Santa Clara, California; and Index Systems, Inc. of Tortola, the British Virgin Islands. The... interactive program guide and parental controls technology by reason of infringement of certain claims of U.S...

  3. 40 CFR 63.113 - Process vent provisions-reference control technology.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 9 2010-07-01 2010-07-01 false Process vent provisions-reference control technology. 63.113 Section 63.113 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... § 63.113 Process vent provisions—reference control technology. (a) The owner or operator of a Group 1...

  4. [Application of near-infrared spectroscopy technology in quality control of TCM manufacturing process].

    Science.gov (United States)

    Tu, Yaosheng; Liu, Jun; Zhang, Jianjun

    2011-09-01

    With the development of research in near-infrared spectroscopy technology, near-infrared spectroscopy are increasingly employed in quality control of traditional Chinese medicine (TCM) manufacturing process. The recent researches in relative field were summarized in this paper. Perspective of near-infrared spectroscopy technology in quality control of TCM manufacturing process was also presented in this paper.

  5. 77 FR 30025 - Importer of Controlled Substances; Notice of Registration; Formulation Technologies, LLC

    Science.gov (United States)

    2012-05-21

    ... Fentanyl (9801), a basic class of controlled substance listed in schedule II. The company plans to import... the registration of Formulation Technologies, LLC. to import the basic class of controlled substance... treaties, conventions, or protocols in effect on May 1, 1971. DEA has investigated Formulation Technologies...

  6. 77 FR 31388 - Importer of Controlled Substances; Notice of Registration; Meridian Medical Technologies

    Science.gov (United States)

    2012-05-25

    ... (9300), a basic class of controlled substance listed in schedule II. The company manufactures a product... registration of Meridian Medical Technologies to import the basic class of controlled substance is consistent..., or protocols in effect on May 1, 1971. DEA has investigated Meridian Medical Technologies to ensure...

  7. 78 FR 30331 - Importer of Controlled Substances; Notice of Registration; Meridian Medical Technologies

    Science.gov (United States)

    2013-05-22

    ... (9300), a basic class of controlled substance listed in schedule II. The company manufactures a product... Meridian Medical Technologies to import the basic class of controlled substance is consistent with the... protocols in effect on May 1, 1971. DEA has investigated Meridian Medical Technologies to ensure that the...

  8. 77 FR 58063 - Approval and Promulgation of Implementation Plans; Texas; Reasonably Available Control Technology...

    Science.gov (United States)

    2012-09-19

    ... Control Technology for the 1997 8-Hour Ozone National Ambient Air Quality Standard AGENCY: Environmental... Reasonably Available Control Technology (RACT) requirements for Volatile Organic Compounds (VOC) and Oxides... reductions shortfall in a timely fashion. This flexible approach is consistent with the Clean Air Act section...

  9. 40 CFR 63.119 - Storage vessel provisions-reference control technology.

    Science.gov (United States)

    2010-07-01

    ... control technology. 63.119 Section 63.119 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... § 63.119 Storage vessel provisions—reference control technology. (a) For each storage vessel to which... storage vessel in a continuous fashion. (iv) If the external floating roof is equipped with a liquid...

  10. 40 CFR 63.1322 - Batch process vents-reference control technology.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 11 2010-07-01 2010-07-01 true Batch process vents-reference control technology. 63.1322 Section 63.1322 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Batch process vents—reference control technology. (a) Batch process vents. The owner or operator of a...

  11. 40 CFR 450.24 - New source performance standards reflecting the best available demonstrated control technology...

    Science.gov (United States)

    2010-07-01

    ... performance standards reflecting the best available demonstrated control technology (NSPS). Any new source... 40 Protection of Environment 29 2010-07-01 2010-07-01 false New source performance standards reflecting the best available demonstrated control technology (NSPS). 450.24 Section 450.24 Protection of...

  12. Examining the Relative Influence of Risk and Control on Intention to Adopt Risky Technologies

    Directory of Open Access Journals (Sweden)

    Sumeet Gupta

    2010-12-01

    Full Text Available For technologies such as electronic commerce, mobile payments, internet and mobile banking etc. customers are concerned about security issues that arise as a result of adoption of these technologies. However, in practice, we find that customers forgo their considerations of risk in the technology, if the benefits of using the technology overpower the risks involved in using the technology. Understanding their relative roles in technology adoption will help technology developers focus their efforts on either of them to improve technology adoption. Results of this study reveal that in adopting a technology, customers are guided more by the perception of control rather than by the perception of risk. Implications for theory and practice are discussed.

  13. Database mirroring in fault-tolerant continuous technological process control

    Directory of Open Access Journals (Sweden)

    R. Danel

    2015-10-01

    Full Text Available This paper describes the implementations of mirroring technology of the selected database systems – Microsoft SQL Server, MySQL and Caché. By simulating critical failures the systems behavior and their resilience against failure were tested. The aim was to determine whether the database mirroring is suitable to use in continuous metallurgical processes for ensuring the fault-tolerant solution at affordable cost. The present day database systems are characterized by high robustness and are resistant to sudden system failure. Database mirroring technologies are reliable and even low-budget projects can be provided with a decent fault-tolerant solution. The database system technologies available for low-budget projects are not suitable for use in real-time systems.

  14. INL Control System Situational Awareness Technology Final Report 2013

    Energy Technology Data Exchange (ETDEWEB)

    Gordon Rueff; Bryce Wheeler; Todd Vollmer; Tim McJunkin

    2013-01-01

    The Situational Awareness project is a comprehensive undertaking of Idaho National Laboratory (INL) in an effort to produce technologies capable of defending the country’s energy sector infrastructure from cyber attack. INL has addressed this challenge through research and development of an interoperable suite of tools that safeguard critical energy sector infrastructure. The technologies in this project include the Sophia Tool, Mesh Mapper (MM) Tool, Intelligent Cyber Sensor (ICS) Tool, and Data Fusion Tool (DFT). Each is designed to function effectively on its own, or they can be integrated in a variety of customized configurations based on the end user’s risk profile and security needs.

  15. High Performance Low Cost Digitally Controlled Power Conversion Technology

    DEFF Research Database (Denmark)

    Jakobsen, Lars Tønnes

    2008-01-01

    suited for digital control schemes involving multiple control loops such as digital control of a switch-mode power supply with several converter stages. Customised digital control solutions implemented in application specific integrated circuits are the best solution for high bandwidth digital control......Digital control of switch-mode power supplies and converters has within the last decade evolved from being an academic subject to an emerging market in the power electronics industry. This development has been pushed mainly by the computer industry that is looking towards digital power management...... of non-isolated DC-DC converters. A customised digital control solution for a voltage mode control scheme should include a digital pulse width modulator which can generate a pulse width modulated signal with high switching frequency and high resolution, a digital compensator with a short execution time...

  16. Control technology for radioactive emissions to the atmosphere at US Department of Energy facilities

    Energy Technology Data Exchange (ETDEWEB)

    Moore, E.B.

    1984-10-01

    The purpose of this report is to provide information to the US Environmental Protection agency (EPA) on existing technology for the control of radionuclide emissions into the air from US Department of Energy (DOE) facilities, and to provide EPA with information on possible additional control technologies that could be used to further reduce these emissions. Included in this report are generic discussions of emission control technologies for particulates, iodine, rare gases, and tritium. Also included are specific discussions of existing emission control technologies at 25 DOE facilities. Potential additional emission control technologies are discussed for 14 of these facilities. The facilities discussed were selected by EPA on the basis of preliminary radiation pathway analyses. 170 references, 131 figures, 104 tables.

  17. A comparative study on export control systems of nuclear technology in ROK and USA

    Energy Technology Data Exchange (ETDEWEB)

    Tae, Jae Woong; Shin, Dong Hoon [Korea Institute of Nuclear Nonproliferation and Control, Daejeon (Korea, Republic of)

    2013-10-15

    Perfect removal of transferred technology is impossible because it is impossible to find all copies of technologies such as files and documents. International community concerns about Terrorists' acquirement of nuclear technologies related to nuclear reactors, enrichment and reprocessing Facilities and heavy water production facilities, which can be used for production of nuclear weapons. Non-state actors as well as concerning countries have tried to possess nuclear technology for developing nuclear weapons. Non-state actors' activities threaten global nuclear security. Korea exported four nuclear power plants to UAE and a research reactor to Jordan. Non-state actors may try to procure nuclear equipment and technology from Korean nuclear industries. Therefore, the export control system should be enhanced for national nuclear security and safety. In this study, the export control system of Korea and the United States were compared concerning to nuclear technology. In summary, controlled activities related to nuclear technology are treated more variously and more diverse activities are controlled in the United States than In Korea. Catch-all control will lose its effectiveness without this. Related to the control of ITT (Intangible Technology Transfer), Korea and the United States are trying to amend the export control regulation. Both of them are trying to control intangible technology transfers effectively. Revised Foreign Trade Act in Korea is expected to introduce a more rigorous system of nuclear technology controls. It focuses on nationality rather than residence. The revised law may face into other problems such as dual nationals like as the United States. However, this satisfies legislative requirements for control of a deemed export. The revised law will enter into force in 2014. Accurate meanings of technology and export will be defined soon in the enforcement decree and the public notice before 2014. However, it is hard to revise the definition

  18. Groups of Fact in Computer Society

    Directory of Open Access Journals (Sweden)

    Maria Cristina Cereser Pezzella

    2015-12-01

    groups and the fact groups, presenting these as subjects, although without constituting a society. Technological changes led to the formation of so-called cyberspace, which enabled a change in the own way of understanding the reality through faster diffusion of the most varied content information, thus allowing not only a quicker movement of goods and messages, as well as the modification of habits and even the conversion of practically any cultural product in assets to be profitable exploitation, aimed at consumption.

  19. Modeling the Benchmark Active Control Technology Wind-Tunnel Model for Active Control Design Applications

    Science.gov (United States)

    Waszak, Martin R.

    1998-01-01

    This report describes the formulation of a model of the dynamic behavior of the Benchmark Active Controls Technology (BACT) wind tunnel model for active control design and analysis applications. The model is formed by combining the equations of motion for the BACT wind tunnel model with actuator models and a model of wind tunnel turbulence. The primary focus of this report is the development of the equations of motion from first principles by using Lagrange's equations and the principle of virtual work. A numerical form of the model is generated by making use of parameters obtained from both experiment and analysis. Comparisons between experimental and analytical data obtained from the numerical model show excellent agreement and suggest that simple coefficient-based aerodynamics are sufficient to accurately characterize the aeroelastic response of the BACT wind tunnel model. The equations of motion developed herein have been used to aid in the design and analysis of a number of flutter suppression controllers that have been successfully implemented.

  20. Management and Control of Domestic Smart Grid Technology

    NARCIS (Netherlands)

    Molderink, Albert; Bakker, Vincent; Bosman, M.G.C.; Hurink, Johann L.; Smit, Gerardus Johannes Maria

    Emerging new technologies like distributed generation, distributed storage, and demand-side load management will change the way we consume and produce energy. These techniques enable the possibility to reduce the greenhouse effect and improve grid stability by optimizing energy streams. By smartly

  1. A New Architecture for Visualization: Open Mission Control Technologies

    Science.gov (United States)

    Trimble, Jay

    2017-01-01

    Open Mission Control Technologies (MCT) is a new architecture for visualisation of mission data. Driven by requirements for new mission capabilities, including distributed mission operations, access to data anywhere, customization by users, synthesis of multiple data sources, and flexibility for multi-mission adaptation, Open MCT provides users with an integrated customizable environment. Developed at NASAs Ames Research Center (ARC), in collaboration with NASAs Advanced Multimission Operations System (AMMOS) and NASAs Jet Propulsion Laboratory (JPL), Open MCT is getting its first mission use on the Jason 3 Mission, and is also available in the testbed for the Mars 2020 Rover and for development use for NASAs Resource Prospector Lunar Rover. The open source nature of the project provides for use outside of space missions, including open source contributions from a community of users. The defining features of Open MCT for mission users are data integration, end user composition and multiple views. Data integration provides access to mission data across domains in one place, making data such as activities, timelines, telemetry, imagery, event timers and procedures available in one place, without application switching. End user composition provides users with layouts, which act as a canvas to assemble visualisations. Multiple views provide the capability to view the same data in different ways, with live switching of data views in place. Open MCT is browser based, and works on the desktop as well as tablets and phones, providing access to data anywhere. An early use case for mobile data access took place on the Resource Prospector (RP) Mission Distributed Operations Test, in which rover engineers in the field were able to view telemetry on their phones. We envision this capability providing decision support to on console operators from off duty personnel. The plug-in architecture also allows for adaptation for different mission capabilities. Different data types and

  2. Technological aspects of corrosion control in metallic systems

    Science.gov (United States)

    Taylor, Matthew Logan

    Three corrosion control technologies were investigated, including the effect of nitrogen on the passivity of chromium in sulfate solutions, possible issues associated with the use of amines in steam turbine environments and the microstructure of naval advanced amorphous coatings. Nitrogen (N) is a minor alloying element commonly used to increase the strength of steels by stabilizing the austenite phase. Physical vapor deposited chromium + nitrogen (0, 6.8 and 8.9 at.%N) coatings were investigated as a model system, to test the model. Because Cr passive films have been observed to be generally n-type semiconductors, an impedance function containing a n-type Faradaic impedance was constructed and optimized to electrochemical impedance spectra for the model system at pH 4,7 and 10 1M sulfate solution at 30°C. An apparent deviation from theory was observed, however. The n-type model predicted steady state currents which were independent of potential, while the observed current densities had a positive correlation with potential. Mott-Schottky analysis revealed that the test potentials were within the n-p transition and p-type potential range, which resolves the apparent deviation. Despite this difficulty, however, the impedance model produced reasonably accurate results, calculating current densities to within one order of magnitude of the measured steady state currents where anodic currents were available and passive film thicknesses on the order of 1-2 nm. Various amines are commonly used to inhibit corrosion in thermal power generation systems, including steam turbines, by increasing the pH. However, during the shutdown phase of the power plant, it is possible for these inhibitors to concentrate and cause corrosion of the turbine rotor. The effect of two ammine inhibitors (monoethanolamine and dimethylamine) on the passivity of ASTM A470/471 steel is investigated in a simulated turbine environment at pH 7, and temperatures of 95°C and at 175°C. Potentiodynamic

  3. Too Many Theories, Too Few Facts? What the Data Tell Us About the Link Between Span of Control, Compensation and Career Dynamics

    DEFF Research Database (Denmark)

    Smeets, Valérie; Warzynski, Frederic

    2008-01-01

    between span of control, compensation and career dynamics and relate our findings to the existing theoretical literature of hierarchies in organizations: the assignment model, the incentives model, the information processing model, the supervision model, and the knowledge-based hierarchy model. We observe...... costs are decreasing. However, we also find evidence of learning and reallocation of talent within and across job levels, a finding that can not be explained by a static model of knowledge based hierarchy but rather by dynamic models of careers in organizations. Finally, we provide a few suggestions...

  4. Assessment of control technology for stationary sources. Volume I: technical discussion. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Minicucci, D.; Herther, M.; Babb, L.; Kuby, W.

    1980-02-01

    The purpose of this project was to develop a reference document for use by the Air Resources Board, local air pollution control districts, and the U.S. Environmental Protection Agency that describes technological options available for the control of emissions from stationary sources located in California. Control technologies were examined for 10 industry groups and six air pollutants. Volume I, Technical Discussion, includes an overall introduction to the project, descriptions of its major elements, background information for each industry group addressed, and the project bibliography. In Volume II, Control Technology Data Tables, qualitative descriptions of control options for the various sources and quantitative information on control technology cost, efficiency, reliability, energy consumption, other environmental impacts, and application status are presented in tabular format. Also included is a code list that classifies the stationary sources examined by industry, process and emission source.

  5. How to Read a Nutrition Facts Label

    Medline Plus

    Full Text Available ... a Child Cope With a Parent's Suicide? How to Read a Nutrition Facts Label (Video) KidsHealth > For Parents > How ... choices. For Teens For Kids For Parents MORE ON THIS TOPIC Keeping Portions Under Control Figuring Out ...

  6. TSCA Chemical Data Reporting Fact Sheet: Articles

    Science.gov (United States)

    This fact sheet provides guidance on classifying articles under the Toxic Substances Control Act (TSCA) and determining the applicability of EPA’s articles exclusion policy for purposes of the Chemical Data Reporting (CDR) rule. The primary goal of this document is to help the regulated community comply with the requirements of the CDR rule.

  7. Energy-Saving Opportunities for Manufacturing Enterprises (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2010-05-01

    This fact sheet English/Chinese describes the Industrial Technologies Program Save Energy Now model and provides information on tools and resources to help Chinese manufacturing enterprises reduce industrial energy intensity.

  8. QUALITY CONTROL IN LOGISTICS ACTIVITIES THROUGH INTERNET OF THINGS TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    ANDREI BAUTU

    2016-06-01

    Full Text Available Modern companies depend on their logistics in order to maintain their purchases-inventory-sales chain to the desired level of performance (i.e. profitability. Many past situations demonstrate that errors, inefficiencies and disruptions in this chain can cause companies to miss opportunities, loose profitability, and even go bankrupt. An important factor to high quality logistics is the quality and availability of information about key processes. Internet of Things (IoT technology allows companies to gather real-time information on processes, people and equipment, and to integrate it in their own informational systems. This paper discusses the use of IoT technology to monitor logistics activities in order to provide support data for performance assessments.

  9. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... irrevocable disability occurs. LEARN ABOUT OUR COMMITMENT TO RESEARCH. Read More Alzheimer's Disease Facts in Each State The 2017 Alzheimer's Disease Facts and Figures report contains data on the impact of this disease in every state across the ...

  10. Math Fact Strategies Research Project

    Science.gov (United States)

    Boso, Annie

    2011-01-01

    An action research project was conducted in order to determine effective math fact strategies for first graders. The traditional way of teaching math facts included using timed tests and flashcards, with most students counting on their fingers or a number line. Six new research-based strategies were taught and analyzed to decide which methods…

  11. Control Technologies for Room Air-conditioner and Packaged Air-conditioner

    Science.gov (United States)

    Ito, Nobuhisa

    Trends of control technologies about air-conditioning machineries, especially room or packaged air conditioners, are presented in this paper. Multiple air conditioning systems for office buildings are mainly described as one application of the refrigeration cycle control technologies including sensors for thermal comfort and heating/ cooling loads are also described as one of the system control technologies. Inverter systems and related technologies for driving variable speed compressors are described in both case of including induction motors and brushless DC motors. Technologies for more accurate control to meet various kind of regulations such as ozone layer destruction, energy saving and global warming, and for eliminating harmonic distortion of power source current, as a typical EMC problem, will be urgently desired.

  12. Environmental control implications of generating electric power from coal. 1977 technology status report. [300 references

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-12-01

    This report is an in-depth review and analysis of particulate control technologies applicable to coal-fired utility boilers. Sources and characteristics of fly ash, applicable emission regulations, and measurement techniques are also discussed. Available control technologies (electrostatic precipitators, fabric filters, and wet scrubbers) are described in detail. In each case, the theory of operation, factors affecting performance, representative installations, costs, and secondary environmental impacts are analyzed. Techniques under development for improving the performance or extending the capabilities of existing technologies are described. Advanced alternative technologies now in the research stage are also evaluated.

  13. Developing Effluent Analysis Technologies to Support Nonproliferation Initiatives, Arms Control and Nonproliferation Technologies, Third quarter 1995

    Energy Technology Data Exchange (ETDEWEB)

    Schubert, S A; Staehle, G; Alonzo, G M [eds.

    1995-01-01

    This issue provides an overview of the Effluent Research Program of the DOE Office of Research and Development, highlighting a number of representative projects within this program in support of nonproliferation initiatives. Technologies reported include portable instruments for on-site inspections, standoff detectors, fieldable, real-time instruments, field collection techniques, and ultrasensitive laboratory techniques.

  14. Updated Meta-Analysis of Learner Control within Educational Technology

    Science.gov (United States)

    Karich, Abbey C.; Burns, Matthew K.; Maki, Kathrin E.

    2014-01-01

    Giving a student control over their learning has theoretical and intuitive appeal, but its effects are neither powerful nor consistent in the empirical literature base. This meta-analysis updated previous meta-analytic research by Niemiec, Sikorski, and Walberg by studying the overall effectiveness of providing learner control within educational…

  15. Silicon Carbide and Magnetorresistive Technologies for Solid State Power Controllers

    Directory of Open Access Journals (Sweden)

    Garrigós A.

    2017-01-01

    Full Text Available The aim of this paper is to make an introduction, review and preliminary investigation tasks of the application of Silicon Carbide (SiC power semiconductors and magnetoresistive (MR current sensors for Solid State Power Controllers (SSPCs and controlled switches, especially for high temperature environment and/or high voltage applications.

  16. Flexible spacecraft dynamics, control and guidance technologies by giovanni campolo

    CERN Document Server

    Mazzini, Leonardo

    2016-01-01

    This book is an up-to-date compendium on spacecraft attitude and orbit control (AOC) that offers a systematic and complete treatment of the subject with the aim of imparting the theoretical and practical knowledge that is required by designers, engineers, and researchers. After an introduction on the kinematics of the flexible and agile space vehicles, the modern architecture and functions of an AOC system are described and the main AOC modes reviewed with possible design solutions and examples. The dynamics of the flexible body in space are then considered using an original Lagrangian approach suitable for the control applications of large space flexible structures. Subsequent chapters address optimal control theory, attitude control methods, and orbit control applications, including the optimal orbital transfer with finite and infinite thrust. The theory is integrated with a description of current propulsion systems, with the focus especially on the new electric propulsion systems and state of the art senso...

  17. Arms Control and nonproliferation technologies: Technology options and associated measures for monitoring a Comprehensive Test Ban, Second quarter

    Energy Technology Data Exchange (ETDEWEB)

    Casey, Leslie A.

    1994-01-01

    This newsletter contains reprinted papers discussing technology options and associated measures for monitoring a Comprehensive Test Ban Treaty (CTBT). These papers were presented to the Conference on Disarmament (CD) in May and June 1994. An interagency Verification Monitoring Task Force developed the papers. The task force included participants from the Arms Control and Disarmament Agency, the Department of Defense, the Department of Energy, the Intelligence Community, the Department of Interior, and the Department of State. The purpose of this edition of Arms Control and Nonproliferation Technologies is to share these papers with the broad base of stakeholders in a CTBT and to facilitate future technology discussions. The papers in the first group discuss possible technology options for monitoring a CTBT in all environments (underground, underwater, atmosphere, and space). These technologies, along with on-site inspections, would facilitate CTBT monitoring by treaty participants. The papers in the second group present possible associated measures, e.g., information exchanges and transparency measures, that would build confidence among states participating in a CTBT.

  18. Advanced Electric Distribution, Switching, and Conversion Technology for Power Control

    Science.gov (United States)

    Soltis, James V.

    1998-01-01

    The Electrical Power Control Unit currently under development by Sundstrand Aerospace for use on the Fluids Combustion Facility of the International Space Station is the precursor of modular power distribution and conversion concepts for future spacecraft and aircraft applications. This unit combines modular current-limiting flexible remote power controllers and paralleled power converters into one package. Each unit includes three 1-kW, current-limiting power converter modules designed for a variable-ratio load sharing capability. The flexible remote power controllers can be used in parallel to match load requirements and can be programmed for an initial ON or OFF state on powerup. The unit contains an integral cold plate. The modularity and hybridization of the Electrical Power Control Unit sets the course for future spacecraft electrical power systems, both large and small. In such systems, the basic hybridized converter and flexible remote power controller building blocks could be configured to match power distribution and conversion capabilities to load requirements. In addition, the flexible remote power controllers could be configured in assemblies to feed multiple individual loads and could be used in parallel to meet the specific current requirements of each of those loads. Ultimately, the Electrical Power Control Unit design concept could evolve to a common switch module hybrid, or family of hybrids, for both converter and switchgear applications. By assembling hybrids of a common current rating and voltage class in parallel, researchers could readily adapt these units for multiple applications. The Electrical Power Control Unit concept has the potential to be scaled to larger and smaller ratings for both small and large spacecraft and for aircraft where high-power density, remote power controllers or power converters are required and a common replacement part is desired for multiples of a base current rating.

  19. Surface chemistry: Key to control and advance myriad technologies

    Science.gov (United States)

    Yates, John T.; Campbell, Charles T.

    2011-01-01

    This special issue on surface chemistry is introduced with a brief history of the field, a summary of the importance of surface chemistry in technological applications, a brief overview of some of the most important recent developments in this field, and a look forward to some of its most exciting future directions. This collection of invited articles is intended to provide a snapshot of current developments in the field, exemplify the state of the art in fundamental research in surface chemistry, and highlight some possibilities in the future. Here, we show how those articles fit together in the bigger picture of this field. PMID:21245359

  20. Aircraft Control Augmentation and Health Monitoring Using FADS Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This Phase I research proposal is aimed at demonstrating the feasibility of an innovative architecture comprising control augmentation and on-line health monitoring...

  1. Photobiology Research Laboratory (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2012-06-01

    This fact sheet provides information about Photobiology Research Laboratory capabilities and applications at NREL. The photobiology group's research is in four main areas: (1) Comprehensive studies of fuel-producing photosynthetic, fermentative, and chemolithotrophic model microorganisms; (2) Characterization and engineering of redox enzymes and proteins for fuel production; (3) Genetic and pathway engineering of model organisms to improve production of hydrogen and hydrocarbon fuels; and (4) Studies of nanosystems using biological and non-biological materials in hybrid generation. NREL's photobiology research capabilities include: (1) Controlled and automated photobioreactors and fermenters for growing microorganisms under a variety of environmental conditions; (2) High-and medium-throughput screening of H{sub 2}-producing organisms; (3) Homologous and heterologous expression, purification, and biochemical/biophysical characterization of redox enzymes and proteins; (4) Qualitative and quantitative analyses of gases, metabolites, carbohydrates, lipids, and proteins; (5) Genetic and pathway engineering and development of novel genetic toolboxes; and (6) Design and spectroscopic characterization of enzyme-based biofuel cells and energy conversion nanodevices.

  2. Microcontroller Based Home Security and Load Controlling Using Gsm Technology

    OpenAIRE

    Mustafijur Rahman; A.H.M Zadidul Karim; Sultanur Nyeem; Faisal Khan; Golam Matin

    2015-01-01

    "Home automation" referred to as 'Intelligent home' or 'automated home', indicates the automation of daily tasks with electrical devices used in homes. This could be the control of lights or more complex chores such as remote viewing of the house interiors for surveillance purposes. The emerging concept of smart homes offers a comfortable, convenient and safe and secure environment for occupants. These include automatic load controlling, fire detection, temperature sensing, and motion detecti...

  3. Research Facts on Homeschooling. General Facts and Trends

    Science.gov (United States)

    Ray, Brian D.

    2006-01-01

    This fact sheet presents the following general facts and trends. Homeschooling may be the fastest-growing form of education in the United States and it is also growing around the world in many nations. There are about 2 million homeschool students in the United States. There were an estimated 1.9 to 2.4 million children (in grades K to 12) home…

  4. R D plans for advanced computer and control technologies

    Energy Technology Data Exchange (ETDEWEB)

    Duggan, P. (Expert-EASE Systems, Inc., Belmont, CA (USA)); Sopocy, P.M. (Sargent and Lundy, Chicago, IL (USA)); Kozlik, G. (Northern Indiana Public Service Co., Hammond, IN (USA)); Sudduth, A.; Davis, J. (Duke Power Co., Charlotte, NC (USA)); Guy, K. (Public Service Co. of Indiana, Inc., Plainfield, IN (USA)); Anzolut, T. (Consolidated Edison Co. of New York, Inc., New York, NY (USA)); Mitchell, P.

    1990-02-01

    Power plant management is finding it increasingly challenging to meet the combined goals of net generated output, efficiency, reliability, and availability. Realizing these goals is becoming increasingly difficult for utilities in light of the continually increasing targets for these goals that must be set across the industry in response to today's more competitive market and demanding regulatory overview. The amount of information that must be digested, interpreted, and acted upon by plant operators to command the maximum performance from a plant while remaining responsive to all of these goals is becoming overwhelming and is rapidly expanding. Implementation of expert systems technology promises to help utilities reach these goals by assisting personnel in the management and interpretation of today's information explosion. This report provides a plan for an organized program of expert system application development that is designed to advance the implementation of expert systems technology throughout the utility industry. This plan has been developed through the efforts of a formal working group comprised of key representatives of utilities, manufacturers, architect/engineers, and consultants having experience in expert systems development. The results of a screening process by which the best prospective expert system applications were identified are presented in the form of summaries that address the need, advantages, limitations, research methodology, estimated costs and benefits, and commercialization potential of each application. Detailed ratings are presented for each of these applications, along with a resultant ranking and prioritization for development and implementation.

  5. Benefits assessment of active control technology and related cockpit technology for rotorcraft

    Science.gov (United States)

    Hampton, B. J.

    1982-01-01

    Two main-rotor active control concepts, one incorporating multicyclic actuators located just below the swashplate, and the other providing for the actuators and power supplies to be located in the rotating frame are considered. Each design concept is integrated with cockpit controllers and displays appropriate to the actuation concept in each case. The benefits of applying the defined ACT/RCT concepts to rotorcraft are quantified by comparison to the baseline model 412 helicopter. These benefits include, in the case of one active control concept; (1) up to 91% reduction in 4/rev hub shears; (2) a flight safety failure rate of 1.96 x 10 to the 8th power failures per flight-hour; (3) rotating controls/rotor hub drag reduction of 40%; (4) a 9% reduction in control system weight; and (5) vibratory deicing. The related cockpit concept reduces pilot workload for critical mission segments as much as 178% visual and 25% manual.

  6. Information Technology Management: Global Command and Control System Joint Operation Planning and Execution System

    Science.gov (United States)

    2003-04-15

    Information Technology Management Department of Defense Office of the Inspector General April 15, 2003 AccountabilityIntegrityQuality Global Command...Dates Covered (from... to) - Title and Subtitle Information Technology Management : Global Command and Control System Joint Operation Planning and...September 7, 1999; “GCCS Strategic Plan 1999-2002,” December 27, 1999; “JOPES Strategic Plan,” April 2000; “Information Technology Management Reform Act

  7. 40 CFR 63.487 - Batch front-end process vents-reference control technology.

    Science.gov (United States)

    2010-07-01

    ... § 63.487 Batch front-end process vents—reference control technology. (a) Batch front-end process vents... process vent, reduce organic HAP emissions for the batch cycle by 90 weight percent using a control device... control device as it relates to continuous front-end process vents shall be used. Furthermore, the...

  8. Coal-fueled diesel technology development Emissions Control

    Energy Technology Data Exchange (ETDEWEB)

    Van Kleunen, W.; Kaldor, S.; Gal, E.; Mengel, M.; Arnold, M.

    1994-01-01

    GEESI Emissions Control program activity ranged from control concept testing of 10 CFM slipstream from a CWS fuel single cylinder research diesel engine to the design, installation, and operation of a full-size Emissions Control system for a full-size CWS fuel diesel engine designed for locomotive operation.Early 10 CFM slipstream testing program activity was performed to determine Emissions Characteristics and to evaluate Emissions Control concepts such a Barrier filtration, Granular bed filtration, and Cyclone particulate collection for reduction of particulate and gaseous emissions. Use of sorbent injection into the engine exhaust gas upstream of the barrier filter or use of sorbent media in the granular bed filter were found to provide reduction of exhaust gas SO{sub 2} and NO{sub x} in addition to collection of ash particulate. Emergence of the use of barrier filtration as a most practical Emissions Control concept disclosed a need to improve cleanability of the filter media in order to avoid reduction of turbocharger performance by excessive barrier filter pressure drop. The next progression of program activity, after the slipstream feasibility state, was 500 CFM cold flow testing of control system concepts. The successful completion of 500 CFM cold flow testing of the Envelope Filter led to a subsequent progression to a similar configuration Envelope Filter designed to operate at 500 CFM hot gas flow from the CWS fuel research diesel engine in the GETS engine test laboratory. This Envelope Filter included the design aspect proven by cold flow testing as well as optimization of the selection of the installed filter media.

  9. Coal-fueled diesel technology development emissions control

    Science.gov (United States)

    Vankleunen, W.; Kaldor, S.; Gal, E.; Mengel, M.; Arnold, M.

    1994-01-01

    General Electric Environmental Services, Inc. (GEESI), Emissions Control program activity ranged from control concept testing of 10 CFM slipstream from a coal-water-slurry (CWS) fuel single cylinder research diesel engine to the design, installation, and operation of a full-size emissions control system for a full-size CWS fuel diesel engine designed for locomotive operation. Early 10 CFM slipstream testing program activity was performed to determine emissions characteristics and to evaluate emissions control concepts such a barrier filtration, granular bed filtration, and cyclone particulate collection for reduction of particulate and gaseous emissions. Use of sorbent injection into the engine exhaust gas upstream of the barrier filter or use of sorbent media in the granular bed filter were found to provide reduction of exhaust gas SO2 and NO(x) in addition to collection of ash particulate. Emergence of the use of barrier filtration as a most practical emissions control concept disclosed a need to improve cleanability of the filter media in order to avoid reduction of turbocharger performance by excessive barrier filter pressure drop. The next progression of program activity, after the slipstream feasibility state, was 500 CFM cold flow testing of control system concepts. The successful completion of 500 CFM cold flow testing of the envelope filter led to a subsequent progression to a similar configuration envelope filter designed to operate at 500 CFM hot gas flow from the CWS fuel research diesel engine in the GETS engine test laboratory. This envelope filter included the design aspect proven by cold flow testing as well as optimization of the selection of the installed filter media.

  10. Arms control and nonproliferation technologies. First quarter 1995

    Energy Technology Data Exchange (ETDEWEB)

    Staehle, G; Alonzo, G M; Sanford, N M [eds.

    1995-01-01

    This first quarter issue for 1995 highlights the Small Business Innovation Research (SBIR) program. The SBIR program is managed by the DOE`s Basic Energy Sciences program within the Office of Energy Research. Each year, the SBIR program solicits research ideas of interest to the DOE. Articles contained in this issue include: The Small Business Innovation Research Program supported by the Office of Nonproliferation and National Security; Automated cueing to man-made objects via multispectral image; Security systems get smart with advanced processing and thermal imaging; A breakthrough in cooling system technology; The APSTNG neutron probe; Lithium-doped fullerene neutron detector; Miniature GC-MS for on-site chemical analysis; and Winner of Sandia President`s Quality Award.

  11. Facts about Meningococcal Disease for Adults

    Science.gov (United States)

    ... Meningococcal Disease Facts about Meningococcal Disease for Adults Facts about Meningococcal Disease for Adults What is meningococcal ... risks associated with the vaccines. Disease and vaccine facts FACT: Quadrivalent meningococcal vaccine (A, C, W, and ...

  12. 77 FR 33487 - Certain Products Containing Interactive Program Guide and Parental Control Technology...

    Science.gov (United States)

    2012-06-06

    ... COMMISSION Certain Products Containing Interactive Program Guide and Parental Control Technology; Institution... Technologies Corporation of Santa Clara, California; Starsight Telecast, Inc. of Santa Clara; United Video Properties, Inc. of Santa Clara, California; and Index Systems, Inc. of the British Virgin Islands. The...

  13. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, KMC CONTROLS, INC. SLE-1001 SIGHT GLASS MONITOR

    Science.gov (United States)

    The Environmental Technology Verification report discusses the technology and performance of the KMC SLE-1001 Sight Glass Monitor manufactured by KMC Controls, Inc. The sight glass monitor (SGM) fits over the sight glass that may be installed in a refrigeration system for the pur...

  14. Advanced Instrumentation, Information, and Control System Technologies: Nondestructive Examination Technologies - FY11 Report

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, Ryan M.; Coble, Jamie B.; Ramuhalli, Pradeep; Bond, Leonard J.

    2011-08-30

    Licensees of commercial nuclear power plants in the US are expected to submit license renewal applications for the period of operation of 60 to 80 years which has also been referred to as long term operation (LTO). The greatest challenges to LTO are associated with degradation of passive components as active components are routinely maintained and repaired or placed through maintenance programs. Some passive component degradation concerns include stress corrosion cracking (SCC) of metal components, radiation induced embrittlement of the reactor pressure vessel (RPV), degradation of buried piping, degradation of concrete containment structures, and degradation of cables. Proactive management of passive component aging employs three important elements including online monitoring of degradation, early detection of degradation at precursor stages, and application of prognostics for the prediction of remaining useful life (RUL). This document assesses several nondestructive examination (NDE) measurement technologies for integration into proactive aging management programs. The assessment is performed by discussing the three elements of proactive aging management identified above, considering the current state of the industry with respect to adopting these key elements, and analyzing measurement technologies for monitoring large cracks in metal components, monitoring early degradation at precursor stages, monitoring the degradation of concrete containment structures, and monitoring the degradation of cables. Specific and general needs have been identified through this assessment. General needs identified include the need for environmentally rugged sensors are needed that can operate reliably in an operating reactor environment, the need to identify parameters from precursor monitoring technologies that are unambiguously correlated with the level of pre-macro defect damage, and a methodology for identifying regions where precursor damage is most likely to initiate.

  15. Scheduling algorithms for automatic control systems for technological processes

    Science.gov (United States)

    Chernigovskiy, A. S.; Tsarev, R. Yu; Kapulin, D. V.

    2017-01-01

    Wide use of automatic process control systems and the usage of high-performance systems containing a number of computers (processors) give opportunities for creation of high-quality and fast production that increases competitiveness of an enterprise. Exact and fast calculations, control computation, and processing of the big data arrays - all of this requires the high level of productivity and, at the same time, minimum time of data handling and result receiving. In order to reach the best time, it is necessary not only to use computing resources optimally, but also to design and develop the software so that time gain will be maximal. For this purpose task (jobs or operations), scheduling techniques for the multi-machine/multiprocessor systems are applied. Some of basic task scheduling methods for the multi-machine process control systems are considered in this paper, their advantages and disadvantages come to light, and also some usage considerations, in case of the software for automatic process control systems developing, are made.

  16. Satellite technology and the control of parasitic diseases in Africa ...

    African Journals Online (AJOL)

    The potential application of these techniques in the surveillance, control and prevention of parasitic diseases in Africa is explored in this write-up. Keywords: surveillance, parasitic diseases, satellite techniques, remote sensing, Geographical Information System (GIS), Global Positioning Sytem (GPS), human and robotic, ...

  17. Accounting Control Technology Using SAP: A Case-Based Approach

    Science.gov (United States)

    Ragan, Joseph; Puccio, Christopher; Talisesky, Brandon

    2014-01-01

    The Sarbanes-Oxley Act (SOX) revolutionized the accounting and audit industry. The use of preventative and process controls to evaluate the continuous audit process done via an SAP ERP ECC 6.0 system is key to compliance with SOX and managing costs. This paper can be used in a variety of ways to discuss issues associated with auditing and testing…

  18. USE OF INTELLECTUAL TECHNOLOGIES FOR QUALITY CONTROL OF CURD

    Directory of Open Access Journals (Sweden)

    M. M. Blagoveshchenskaia

    2014-01-01

    Full Text Available Summary. Method of curds quality control, based on neural network model is introduced in the paper. It allows to give fair estimate of final product’s quality without use of professional degustators. Method consists in construction of neural network model to estimate quality of curds by input and output parameters. Hardware software complex of curds taste control is proposed to apply in industry for independent estimate of final product. Operation of neural network model based on usage of artificial neural networks, which is one of directions of artificial intelligence theory. Neural network model consists of several artificial neurons layers, which emulate nerve cells functioning. Feed forward network of MLP type was used in solving of curds taste control problem. Feature of this network is that signals passed from one layer’s neurons to next layer’s neurons only from input layer to output, not the other way. Neural network was trained for its correct operation by selection of optimal synaptic factors. Flow diagram of training algorithm is introduced in the paper. Algorithm of neural network tuning is described in the paper. Author proposed set of recommendations for software-hardware complex deployment. Experiment results show that this taste estimate method based on neural net works simplify a problem of final product control as allow to react to deviations in production process on proper time.

  19. Wearable Device Control Platform Technology for Network Application Development

    Directory of Open Access Journals (Sweden)

    Heejung Kim

    2016-01-01

    Full Text Available Application development platform is the most important environment in IT industry. There are a variety of platforms. Although the native development enables application to optimize, various languages and software development kits need to be acquired according to the device. The coexistence of smart devices and platforms has rendered the native development approach time and cost consuming. Cross-platform development emerged as a response to these issues. These platforms generate applications for multiple devices based on web languages. Nevertheless, development requires additional implementation based on a native language because of the coverage and functions of supported application programming interfaces (APIs. Wearable devices have recently attracted considerable attention. These devices only support Bluetooth-based interdevice communication, thereby making communication and device control impossible beyond a certain range. We propose Network Application Agent (NetApp-Agent in order to overcome issues. NetApp-Agent based on the Cordova is a wearable device control platform for the development of network applications, controls input/output functions of smartphones and wearable/IoT through the Cordova and Native API, and enables device control and information exchange by external users by offering a self-defined API. We confirmed the efficiency of the proposed platform through experiments and a qualitative assessment of its implementation.

  20. Reduction of Helicopter Blade-Vortex Interaction Noise by Active Rotor Control Technology

    Science.gov (United States)

    Yu, Yung H.; Gmelin, Bernd; Splettstoesser, Wolf; Brooks, Thomas F.; Philippe, Jean J.; Prieur, Jean

    1997-01-01

    Helicopter blade-vortex interaction noise is one of the most severe noise sources and is very important both in community annoyance and military detection. Research over the decades has substantially improved basic physical understanding of the mechanisms generating rotor blade-vortex interaction noise and also of controlling techniques, particularly using active rotor control technology. This paper reviews active rotor control techniques currently available for rotor blade vortex interaction noise reduction, including higher harmonic pitch control, individual blade control, and on-blade control technologies. Basic physical mechanisms of each active control technique are reviewed in terms of noise reduction mechanism and controlling aerodynamic or structural parameters of a blade. Active rotor control techniques using smart structures/materials are discussed, including distributed smart actuators to induce local torsional or flapping deformations, Published by Elsevier Science Ltd.

  1. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... Alzheimer's >> Home Text size: A A A 2017 Alzheimer's Disease Facts and Figures Download the Full Report: Download ... spending. Take action. Become an advocate SPECIAL REPORT — ALZHEIMER'S DISEASE: THE NEXT FRONTIER In the history of medicine, ...

  2. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... Home Text size: A A A 2017 Alzheimer's Disease Facts and Figures Download the Full Report: Download ... Take action. Become an advocate SPECIAL REPORT — ALZHEIMER'S DISEASE: THE NEXT FRONTIER In the history of medicine, ...

  3. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... Facts and Figures report contains data on the impact of this disease in every state across the nation. Click below to see the effect that Alzheimer's is having in your state. Read ...

  4. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... and treated before irrevocable disability occurs. LEARN ABOUT OUR COMMITMENT TO RESEARCH. Read More Alzheimer's Disease Facts ... a Tribute Read past editions . Sign up for our e-newsletter Stay up-to-date on the ...

  5. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... Facts and Figures report contains data on the impact of this disease in every state across the ... Alzheimer's treatments, care and research. Get tips for living with Alzheimer's as well as simple ...

  6. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... every 33 seconds. GET INVOLVED. Join the cause Mortality Alzheimer's disease is the sixth-leading cause of ... Facts and Figures report contains data on the impact of this disease in every state across the ...

  7. State Fact Sheets on COPD

    Science.gov (United States)

    ... Submit Search The CDC Chronic Obstructive Pulmonary Disease (COPD) Note: Javascript is disabled or is not supported ... message, please visit this page: About CDC.gov . COPD Homepage Data and Statistics Fact Sheets Publications Publications ...

  8. The Housing Bubble Fact Sheet

    OpenAIRE

    Dean Baker

    2005-01-01

    This paper explains the basic facts about the current housing market. It lays out the evidence that the rise in housing prices constitutes a housing bubble - and explains what can be expected when it inevitably collapses.

  9. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... pocket spending. Take action. Become an advocate SPECIAL REPORT — ALZHEIMER'S DISEASE: THE NEXT FRONTIER In the history ... State The 2017 Alzheimer's Disease Facts and Figures report contains data on the impact of this disease ...

  10. Tuberculosis Facts - Testing for TB

    Science.gov (United States)

    Tuberculosis (TB) Facts Testing for TB What is TB? “TB” is short for a disease called tuberculosis. TB is spread through the air from one ... Viral Hepatitis, STD, and TB Prevention Division of Tuberculosis Elimination

  11. Tuberculosis Facts - Exposure to TB

    Science.gov (United States)

    Tuberculosis (TB) Facts Exposure to TB What is TB? “TB” is short for a disease called tuberculosis. TB is spread through the air from one ... Viral Hepatitis, STD, and TB Prevention Division of Tuberculosis Elimination

  12. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... 2017 Alzheimer's Disease Facts and Figures report contains data on the impact of this disease in every ... with third parties. Please read our security and privacy policy . Plan ahead Get help and support I ...

  13. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... Alzheimer's >> Home Text size: A A A 2017 Alzheimer's Disease Facts and Figures Download the Full Report: ... twice as high. Invest in a world without Alzheimer's. Donate Caregivers In 2016, 15.9 million family ...

  14. Alzheimer's Disease Facts and Figures

    Science.gov (United States)

    ... Alzheimer's >> Home Text size: A A A 2017 Alzheimer's Disease Facts and Figures Download the Full Report: ... twice as high. Invest in a world without Alzheimer's. Donate Caregivers In 2016, 15.9 million family ...

  15. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... Facts and Figures report contains data on the impact of this disease in every state across the nation. Click below to see the effect that Alzheimer's is having in your state. Leave ...

  16. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... your state. FIND YOUR WALK Read past editions . Sign up for our e-newsletter Stay up-to- ... researcher Message boards Get the facts 10 warning signs & symptoms What is dementia What is Alzheimer's 7 ...

  17. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... is having in your state. Read past editions . Sign up for our e-newsletter Stay up-to- ... researcher Message boards Get the facts 10 warning signs & symptoms What is dementia What is Alzheimer's 7 ...

  18. 2010 public transportation fact book

    Science.gov (United States)

    2010-04-01

    The Public Transportation Fact Book, published annually, contains national aggregate statistical data covering all aspects of the transit industry in the United States and Canada. Two appendices, also available, provide additional in-depth informatio...

  19. NJ transportation fact book, 2007

    Science.gov (United States)

    2010-01-01

    The New Jersey Transportation Fact Book 2006-07 presents information about the New Jersey Department of Transportation : and other agencies that provide transportation services in New Jersey. We hope it will prove helpful.

  20. 2008 public transportation fact book

    Science.gov (United States)

    2008-06-01

    This Public Transportation Fact Book presents statistics describing the entire United States transit industry for 1995 : through 2006 with additional detail and overview presentations for 2006. Also included are definitions of reported data : items.

  1. Four FACTs Spiritual Assessment Tool.

    Science.gov (United States)

    LaRocca-Pitts, Mark

    2015-01-01

    The Four FACTs Spiritual Assessment Tool combines the Four Fs and the FACT Spiritual Assessment Tool of LaRocca-Pitts into a single tool. The Four FACTs Tool is specifically designed for beginning students, but can also meet the needs of professional chaplains. Though designed for use in an acute care setting, it can be easily adapted for other settings. The Four FACTs Tool is easy to learn and to use and it gathers and evaluates relevant clinical information that can then be used to develop a plan of care. In its shortened form, as ACT, it informs how the chaplain can be fully present with patients and their families, especially in a time of crisis.

  2. 2008 Swimming Season Fact Sheets

    Science.gov (United States)

    To help beachgoers make informed decisions about swimming at U.S. beaches, EPA annually publishes state-by-state data about beach closings and advisories for the previous year's swimming season. These fact sheets summarize that information by state.

  3. 2010 Swimming Season Fact Sheets

    Science.gov (United States)

    To help beachgoers make informed decisions about swimming at U.S. beaches, EPA annually publishes state-by-state data about beach closings and advisories for the previous year's swimming season. These fact sheets summarize that information by state.

  4. 2009 Swimming Season Fact Sheets

    Science.gov (United States)

    To help beachgoers make informed decisions about swimming at U.S. beaches, EPA annually publishes state-by-state data about beach closings and advisories for the previous year's swimming season. These fact sheets summarize that information by state.

  5. 2007 Swimming Season Fact Sheets

    Science.gov (United States)

    To help beachgoers make informed decisions about swimming at U.S. beaches, EPA annually publishes state-by-state data about beach closings and advisories for the previous year's swimming season. These fact sheets summarize that information by state.

  6. 2006 Swimming Season Fact Sheets

    Science.gov (United States)

    To help beachgoers make informed decisions about swimming at U.S. beaches, EPA annually publishes state-by-state data about beach closings and advisories for the previous year's swimming season. These fact sheets summarize that information by state.

  7. Get the Facts about Radiation

    Science.gov (United States)

    ... this issue Looking Inside Get the Facts About Radiation Send us your comments Radiation can be dangerous, but it can also save lives. How can that be? Harnessed properly, radiation can help diagnose and even treat disease. So ...

  8. Filtering Dialysis Myths from Facts

    Science.gov (United States)

    ... Menu Menu Search Home Prevention Kidney Disease Patients Organ Donation & Transplantation Professionals Events Advocacy Donate A to Z ... the area if needed. Myth: Dialysis is a death sentence. Fact: Dialysis is a treatment that helps ...

  9. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... treated before irrevocable disability occurs. LEARN ABOUT OUR COMMITMENT TO RESEARCH. Read More Alzheimer's Disease Facts in ... is a not-for-profit 501(c)(3) organization. Copyright © 2017 Alzheimer's Association ® . All rights reserved. Our ...

  10. Definition and Facts for Constipation

    Science.gov (United States)

    ... Causes Diagnosis Treatment Eating, Diet, & Nutrition Clinical Trials Definition & Facts for Constipation What is Constipation? Constipation is ... bright red blood in your stool, on toilet paper, or in the toilet after a bowel movement. ...

  11. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... Caring for someone with Alzheimer's? Get Resources Cost to Nation The costs of health care and long- ... before irrevocable disability occurs. LEARN ABOUT OUR COMMITMENT TO RESEARCH. Read More Alzheimer's Disease Facts in Each ...

  12. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... action. Become an advocate SPECIAL REPORT — ALZHEIMER'S DISEASE: THE NEXT FRONTIER In the history of medicine, one ... physician I am a researcher Message boards Get the facts 10 warning signs & symptoms What is dementia ...

  13. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... irrevocable disability occurs. LEARN ABOUT OUR COMMITMENT TO RESEARCH. Read More Alzheimer's Disease Facts in Each State ... news and advances in Alzheimer's treatments, care and research. Get tips for living with Alzheimer's as well ...

  14. Ella-V and technology usage technology usage in an english language and literacy acquisition validation randomized controlled trial study

    Directory of Open Access Journals (Sweden)

    Roisin P. Corcoran

    2014-12-01

    Full Text Available This paper describes the use of technology to provide virtual professional development (VPD for teachers and to conduct classroom observations in a study of English Language Learner (ELL instruction in grades K–3. The technology applications were part of a cluster randomized control trial (RCT design for a federally funded longitudinal validation study of a particular program, English Language and Literacy Acquisition-Validation, ELLA- V, to determine its degree of impact on English oral language/literacy, reading, and science across 63 randomly assigned urban, suburban, and rural schools (first year of implementation. ELLA-V also examines the impact of bimonthly VPD for treatment teachers compared to comparison group teachers on pedagogical skills, measured by sound observation instruments, and on student achievement, measured by state/national English language/literacy/reading tests and a national science test. This study features extensive technology use via virtual observations, bimonthly VPD, and randomly assigned treatment and control schools with students served in English as second language (ESL instructional time. The study design and methodology are discussed relativeto the specialized uses of technology and issues involving the evaluation of technology’s contribution to the intervention of interest and of the efficient, cost-effective execution of the study.

  15. Mechanization and new technologies for the control and the sustainability of agricultural and forestry systems

    Directory of Open Access Journals (Sweden)

    The Editors

    2016-05-01

    Full Text Available Abstract Book of the Congress:Mechanization and new technologies for the control and the sustainability of agricultural and forestry systems Alghero, Italy, 29th May - 1st June 2016

  16. A Regenerable VOC Control System (RVCS) for Characterizing Properties of Sorbents Used in Separation Technologies

    Science.gov (United States)

    Nolek, Sara D.; Monje, Oscar A.

    2010-01-01

    This slide presentation reviews the design, method of operation, and testing of a regenerable Volatile Organic Compound (VOC) control system that characterizes properties of sorbents used in separation technologies.

  17. Trends in the use of digital technology for control and regulation of power supplies.

    Energy Technology Data Exchange (ETDEWEB)

    Carwardine, J.; Lenkszus, F.

    1999-10-22

    Since the availability of computers, accelerator power supplies have relied on digital technology in some way, from such simple tasks as turning the supplies on and off to the supplying of computer-controlled references. However, advances in digital technology, both in performance and cost, allow considerably more than simple control and monitoring. This, coupled with increasing demand for higher performance and monitoring capabilities, has made it appealing to integrate such technology into power supply designs. This paper will review current trends in the use of such advanced technology as embedded DSP controllers, and the application of real-time algorithms to the regulation and control of power supplies for accelerators and other large-scale physics applications.

  18. Final Rule for Control of Hazardous Air Pollutants From Mobile Sources: Early Credit Technology Requirement Revision

    Science.gov (United States)

    EPA is taking final action to revise the February 26, 2007 mobile source air toxics rule’s requirements that specify which benzene control technologies a refiner may utilize to qualify to generate early benzene credits.

  19. Life cycle cost assessment and performance evaluation of sediment control technologies.

    Science.gov (United States)

    2015-10-01

    This study was performed for the Georgia Department of Transportation (GDOT) : to better understand the environmental impacts associated with sediment control : technology currently employed on transportation projects. In this study, a review of : cu...

  20. Research on the Implementation of Technological Measures for Controlling Indoor Environmental Quality in Green Residential Buildings

    Science.gov (United States)

    Wang, Ruozhu; Liu, Pengda; Qian, Yongmei

    2018-02-01

    This paper analyzes the design technology of controlling indoor quality in engineering practice, it is proposed that, in framework system of green residential building design, how to realize the design idea of controlling the indoor environment quality, and the design technology with feasibility, including the sunshine and lighting, indoor air quality and thermal environment, sound insulation and noise reduction measures, etc.. The results of all will provide a good theoretical supportting for the design of green residential building.

  1. R and D plans for advanced computer and control technologies

    Energy Technology Data Exchange (ETDEWEB)

    Sopocy, D.M. (Sargent and Lundy, Chicago, IL (USA))

    1990-02-01

    This volume is the Executive Summary of the EPRI R D plans in three related areas of fossil-fired power plant design and operation: controls and instrumentation; expert systems; and automation and simulators. Volumes 2, 3, and 4 of this series individually discuss these three research areas. Both short- and long-term R D needs of the utility industry are addressed in these plans. 14 refs., 15 figs., 3 tabs.

  2. Control of mercury emissions: policies, technologies, and future trends

    OpenAIRE

    Rhee, Seung-Whee

    2015-01-01

    Seung-Whee Rhee Department of Environmental Engineering, Kyonggi University, Suwon, Republic of Korea Abstract: Owing to the Minamata Convention on Mercury and the Global Mercury Partnership, policies and regulations on mercury management in advanced countries were intensified by a mercury phaseout program in the mercury control strategy. In developing countries, the legislative or regulatory frameworks on mercury emissions are not established specifically, but mercury management is designed...

  3. Using XML and Java Technologies for Astronomical Instrument Control

    Science.gov (United States)

    Ames, Troy; Case, Lynne; Powers, Edward I. (Technical Monitor)

    2001-01-01

    Traditionally, instrument command and control systems have been highly specialized, consisting mostly of custom code that is difficult to develop, maintain, and extend. Such solutions are initially very costly and are inflexible to subsequent engineering change requests, increasing software maintenance costs. Instrument description is too tightly coupled with details of implementation. NASA Goddard Space Flight Center, under the Instrument Remote Control (IRC) project, is developing a general and highly extensible framework that applies to any kind of instrument that can be controlled by a computer. The software architecture combines the platform independent processing capabilities of Java with the power of the Extensible Markup Language (XML), a human readable and machine understandable way to describe structured data. A key aspect of the object-oriented architecture is that the software is driven by an instrument description, written using the Instrument Markup Language (IML), a dialect of XML. IML is used to describe the command sets and command formats of the instrument, communication mechanisms, format of the data coming from the instrument, and characteristics of the graphical user interface to control and monitor the instrument. The IRC framework allows the users to define a data analysis pipeline which converts data coming out of the instrument. The data can be used in visualizations in order for the user to assess the data in real-time, if necessary. The data analysis pipeline algorithms can be supplied by the user in a variety of forms or programming languages. Although the current integration effort is targeted for the High-resolution Airborne Wideband Camera (HAWC) and the Submillimeter and Far Infrared Experiment (SAFIRE), first-light instruments of the Stratospheric Observatory for Infrared Astronomy (SOFIA), the framework is designed to be generic and extensible so that it can be applied to any instrument. Plans are underway to test the framework

  4. Environmental control implications of generating electric power from coal. Technology status report. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    None

    1976-12-01

    This is the first in a series of reports evaluating environmental control technologies applicable to the coal-to-electricity process. The technologies are described and evaluated from an engineering and cost perspective based upon the best available information obtained from utility experience and development work in progress. Environmental control regulations and the health effects of pollutants are also reviewed. Emphasis is placed primarily upon technologies that are now in use. For SO/sub 2/ control, these include the use of low sulfur coal, cleaned coal, or flue-gas desulfurization systems. Electrostatic precipitators and fabric filters used for the control of particulate matter are analyzed, and combustion modifications for NO/sub x/ control are described. In each area, advanced technologies still in the development stage are described briefly and evaluated on the basis of current knowledge. Fluidized-bed combustion (FBC) is a near-term technology that is discussed extensively in the report. The potential for control of SO/sub 2/ and NO/sub x/ emissions by use of FBC is analyzed, as are the resulting solid waste disposal problems, cost estimates, and its potential applicability to electric utility systems. Volume II presents the detailed technology analyses complete with reference citations. This same material is given in condensed form in Volume I without references. A brief executive summary is also given in Volume I.

  5. A Research Framework for Demonstrating Benefits of Advanced Control Room Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Le Blanc, Katya [Idaho National Lab. (INL), Idaho Falls, ID (United States); Boring, Ronald [Idaho National Lab. (INL), Idaho Falls, ID (United States); Joe, Jeffrey [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hallbert, Bruce [Idaho National Lab. (INL), Idaho Falls, ID (United States); Thomas, Kenneth [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-12-01

    Control Room modernization is an important part of life extension for the existing light water reactor fleet. None of the 99 currently operating commercial nuclear power plants in the U.S. has completed a full-scale control room modernization to date. A full-scale modernization might, for example, entail replacement of all analog panels with digital workstations. Such modernizations have been undertaken successfully in upgrades in Europe and Asia, but the U.S. has yet to undertake a control room upgrade of this magnitude. Instead, nuclear power plant main control rooms for the existing commercial reactor fleet remain significantly analog, with only limited digital modernizations. Previous research under the U.S. Department of Energy’s Light Water Reactor Sustainability Program has helped establish a systematic process for control room upgrades that support the transition to a hybrid control. While the guidance developed to date helps streamline the process of modernization and reduce costs and uncertainty associated with introducing digital control technologies into an existing control room, these upgrades do not achieve the full potential of newer technologies that might otherwise enhance plant and operator performance. The aim of the control room benefits research presented here is to identify previously overlooked benefits of modernization, identify candidate technologies that may facilitate such benefits, and demonstrate these technologies through human factors research. This report serves as an outline for planned research on the benefits of greater modernization in the main control rooms of nuclear power plants.

  6. Energy utilization and environmental control technologies in the coal-electric cycle

    Energy Technology Data Exchange (ETDEWEB)

    Ferrell, G.C.

    1977-10-01

    This report presents an overview and assessment of the currently commercial and possible future technologies in the United States that are a part of the coal-electric cycle. From coal production to residual emissions control at the power plant stack, this report includes a brief history, current status and future assessment of each technology. It also includes a discussion, helpful for policy making decisions, of the process operation, environmental emission characteristics, market constraints and detailed cost estimates for each of these technologies, with primary emphasis on coal preparation, coal-electric generation and emissions control systems.

  7. Description of emission control using fluidized-bed, heat-exchange technology

    Energy Technology Data Exchange (ETDEWEB)

    Vogel, G.J.; Grogan, P.J.

    1980-06-01

    Environmental effects of fluidized-bed, waste-heat recovery technology are identified. The report focuses on a particular configuration of fluidized-bed, heat-exchange technology for a hypothetical industrial application. The application is a lead smelter where a fluidized-bed, waste-heat boiler (FBWHB) is used to control environmental pollutants and to produce steam for process use. Basic thermodynamic and kinetic information for the major sulfur dioxide (SO/sub 2/) and NO/sub x/ removal processes is presented and their application to fluidized-bed, waste heat recovery technology is discussed. Particulate control in fluidized-bed heat exchangers is also discussed.

  8. Investigating preferences for mosquito-control technologies in Mozambique with latent class analysis

    Directory of Open Access Journals (Sweden)

    Barclay Victoria C

    2011-07-01

    Full Text Available Abstract Background It is common practice to seek the opinions of future end-users during the development of innovations. Thus, the aim of this study is to investigate latent classes of users in Mozambique based on their preferences for mosquito-control technology attributes and covariates of these classes, as well as to explore which current technologies meet these preferences. Methods Surveys were administered in five rural villages in Mozambique. The data were analysed with latent class analysis. Results This study showed that users' preferences for malaria technologies varied, and people could be categorized into four latent classes based on shared preferences. The largest class, constituting almost half of the respondents, would not avoid a mosquito-control technology because of its cost, heat, odour, potential to make other health issues worse, ease of keeping clean, or inadequate mosquito control. The other three groups are characterized by the attributes which would make them avoid a technology; these groups are labelled as the bites class, by-products class, and multiple-concerns class. Statistically significant covariates included literacy, self-efficacy, willingness to try new technologies, and perceived seriousness of malaria for the household. Conclusions To become widely diffused, best practices suggest that end-users should be included in product development to ensure that preferred attributes or traits are considered. This study demonstrates that end-user preferences can be very different and that one malaria control technology will not satisfy everyone.

  9. Active control of acoustic pressure fields using smart material technologies

    Science.gov (United States)

    Banks, H. T.; Smith, R. C.

    1993-01-01

    An overview describing the use of piezoceramic patches in reducing noise in a structural acoustics setting is presented. The passive and active contributions due to patches which are bonded to an Euler-Bernoulli beam or thin shell are briefly discussed and the results are incorporated into a 2-D structural acoustics model. In this model, an exterior noise source causes structural vibrations which in turn lead to interior noise as a result of nonlinear fluid/structure coupling mechanism. Interior sound pressure levels are reduced via patches bonded to the flexible boundary (a beam in this case) which generate pure bending moments when an out-of-phase voltage is applied. Well-posedness results for the infinite dimensional system are discussed and a Galerkin scheme for approximating the system dynamics is outlined. Control is implemented by using linear quadratic regulator (LQR) optimal control theory to calculate gains for the linearized system and then feeding these gains back into the nonlinear system of interest. The effectiveness of this strategy for this problem is illustrated in an example.

  10. The Foundation for Application of Multi-Agent Technology In a Holonic Shop Floor Control Architecture

    DEFF Research Database (Denmark)

    Langer, Gilad; Bilberg, Arne

    1997-01-01

    control. The work is based on a theoretical study of new manufacturing systems theories, research of agent multi-agent technology, and two case studies. It is part of a larger research project which aims at developing a multi-cell control architecture based on the Holonic Manufacturing System theory....... by applying simulation and cell control enabling technologies. In order to continue this research effort new concepts and theories for shop floor control are investigated. This article presents an overview of the multi-agent concept based on a literature study. This is followed by an investigation regarding...... the adaptation and development of shop floor control architectures. The adaptation is aimed at providing a sound foundation for application of multi-agent technology. This will include a summary of the ongoing research on HMS, and current results regarding the development of a holonic SFC architecture...

  11. Performance and Durability Assessment of Two Emission Control Technologies Installed on a Legacy High-Speed Marine Diesel Engine

    Science.gov (United States)

    2015-11-05

    Performance and Durability Assessment of Two Emission Control Technologies Installed on a Legacy High-Speed Marine Diesel Engine Jonathan DeHart...TITLE AND SUBTITLE Performance and Durability Assessment of Two Emission Control Technologies Installed on a Legacy High-Speed Marine Diesel Engine ... Performance and Durability Assessment of Two Emission Control Technologies Installed on a Legacy Marine Diesel Engine 2 MARINE ENGINE

  12. Applying Space Technology to Enhance Control of an Artificial Arm

    Science.gov (United States)

    Atkins, Diane; Donovan, William H.; Novy, Mara; Abramczyk, Robert

    1997-01-01

    At the present time, myoelectric prostheses perform only one function of the hand: open and close with the thumb, index and middle finger coming together to grasp various shaped objects. To better understand the limitations of the current single-function prostheses and the needs of the individuals who use them, The Institute for Rehabilitation and Research (TIRR), sponsored by the National Institutes of Health (August 1992 - November 1994), surveyed approximately 2500 individuals with upper limb loss. When asked to identify specific features of their current electric prosthesis that needed improvement, the survey respondents overwhelmingly identified the lack of wrist and finger movement as well as poor control capability. Simply building a mechanism with individual finger and wrist motion is not enough. Individuals with upper limb loss tend to reject prostheses that require continuous visual monitoring and concentration to control. Robotics researchers at NASA's Johnson Space Center (JSC) and Rice University have made substantial progress in myoelectric teleoperation. A myoelectric teleoperation system translates signals generated by an able-bodied robot operator's muscles during hand motions into commands that drive a robot's hand through identical motions. Farry's early work in myoelectric teleoperation used variations over time in the myoelectric spectrum as inputs to neural networks to discriminate grasp types and thumb motions. The resulting schemes yielded up to 93% correct classification on thumb motions. More recently, Fernandez achieved 100% correct non-realtime classification of thumb abduction, extension, and flexion on the same myoelectric data. Fernandez used genetic programming to develop functions that discriminate between thumb motions using myoelectric signal parameters. Genetic programming (GP) is an evolutionary programming method where the computer can modify the discriminating functions' form to improve its performance, not just adjust

  13. The impact of active controls technology on the structural integrity of aeronautical vehicles

    Science.gov (United States)

    Noll, Thomas E.; Austin, Edward; Donley, Shawn; Graham, George; Harris, Terry; Kaynes, Ian; Lee, Ben; Sparrow, James

    1993-01-01

    The findings of an investigation conducted under the auspices of The Technical Cooperation Program (TTCP) to assess the impact of active controls technology on the structural integrity of aeronautical vehicles and to evaluate the present state-of-the-art for predicting loads caused by a flight-control system modification and the resulting change in the fatigue life of the flight vehicle are summarized. Important points concerning structural technology considerations implicit in applying active controls technology in new aircraft are summarized. These points are well founded and based upon information received from within the aerospace industry and government laboratories, acquired by sponsoring workshops which brought together experts from contributing and interacting technical disciplines, and obtained by conducting a case study to independently assess the state of the technology. The paper concludes that communication between technical disciplines is absolutely essential in the design of future high performance aircraft.

  14. Performance of FACTS equipment in Meshed systems

    Energy Technology Data Exchange (ETDEWEB)

    Lerch, E.; Povh, D. [Siemens AG, Berlin (Germany)

    1994-12-31

    Modern power electronic devices such as thyristors and GTOs have made it possible to design controllable network elements, which will play a considerable role in ensuring reliable economic operation of transmission systems as a result of their capability to rapidly change active and reactive power. A number of FACTS elements for high-speed active and reactive power control will be described. Control of power system fluctuations in meshed systems by modulation of active and reactive power will be demonstrated using a number of examples. (author) 7 refs., 11 figs.

  15. Intelligent control system for continuous technological process of alkylation

    Science.gov (United States)

    Gebel, E. S.; Hakimov, R. A.

    2018-01-01

    Relevance of intelligent control for complex dynamic objects and processes are shown in this paper. The model of a virtual analyzer based on a neural network is proposed. Comparative analysis of mathematical models implemented in MathLab software showed that the most effective from the point of view of the reproducibility of the result is the model with seven neurons in the hidden layer, the training of which was performed using the method of scaled coupled gradients. Comparison of the data from the laboratory analysis and the theoretical model are showed that the root-mean-square error does not exceed 3.5, and the calculated value of the correlation coefficient corresponds to a "strong" connection between the values.

  16. PROCESS CONTROL IN THE EDUCATION OF ORGANIC CHEMICAL TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    lstván Csontos

    2001-06-01

    Full Text Available Las prácticas de laboratorio demuestran la importancia de los modernos procesos de control en las tecnologías de química orgánica. Se necesitaba desarrollar un sistema que une las ventajas de los calorímetros de reacción con las de modelo de los reactores controladas de la industria. El diseño de hardware y de software se permite trasladar el programa desarrollado en el laboratorio para el nivel industrial. El algoritmo general para las reacciones de diazotación y clormetilación es aplicado para el sintésis del cloruro de benzo-diazonio y cloruro de dietoxi-benzil en las prácticas de laboratorio.

  17. Raising quality of maintenance and control of metallic structures in large-load technological machines

    Science.gov (United States)

    Drygin, M. Yu; Kuryshkin, N. P.

    2018-01-01

    Active growth of coal extraction and underinvestment of coal mining in Russia lead to the fact that technical state of more than 86% of technological machines at opencast coal mines is unacceptable. One of the most significant problems is unacceptable state of supporting metallic structures of excavators and mine dump trucks. The analysis has shown that defects in these metallic structures had been accumulated for a long time. Their removal by the existing method of repair welding was not effective – the flaws reappeared in 2–6 months of technological machines’ service. The authors detected the prime causes that did not allow to make a good repair welding joint. A new technology of repair welding had been tested and endorsed, and this allowed to reduce the number of welded joints’ flaws by 85% without additional raising welders’ qualification. As a result the number of flaws in metallic structures of the equipment had been reduced by 35 % as early as in the first year of using the new technology.

  18. Industrial hygiene and control technology assessment of ion implantation operations.

    Science.gov (United States)

    Ungers, L J; Jones, J H

    1986-10-01

    Ion implantation is a process used to create the functional units (pn junctions) of integrated circuits, photovoltaic (solar) cells and other semiconductor devices. During the process, ions of an impurity or a "dopant" material are created, accelerated and imbedded in wafers of silicon. Workers responsible for implantation equipment are believed to be at risk from exposure to both chemical (dopant compounds) and physical (ionizing radiation) agents. In an effort to characterize the chemical exposures, monitoring for chemical hazards was conducted near eleven ion implanters at three integrated circuit facilities, while ionizing radiation was monitored near four of these units at two of the facilities. The workplace monitoring suggests that ion implantation operators routinely are exposed to low-level concentrations of dopants. Although the exact nature of dopant compounds released to the work environment was not determined, area and personal samples taken during normal operating activities found concentrations of arsenic, boron and phosphorous below OSHA Permissible Exposure Limits (PELs) for related compounds; area samples collected during implanter maintenance activities suggest that a potential exists for more serious exposures. The results of badge dosimetry monitoring for ionizing radiation indicate that serious exposures are unlikely to occur while engineering controls remain intact. All emissions were detected at levels unlikely to result in exposures above the OSHA standard for the whole body (1.25 rems per calendar quarter). The success of existing controls in preventing worker exposures is discussed. Particular emphasis is given to the differential exposures likely to be experienced by operators and maintenance personnel.(ABSTRACT TRUNCATED AT 250 WORDS)

  19. Optimal Reactive Power Dispatch Considering FACTS Devices

    Directory of Open Access Journals (Sweden)

    Ismail MAROUANI

    2011-06-01

    Full Text Available Because their capability to change the network parameters with a rapid response and enhanced flexibility, flexible AC transmission system (FACTS devices have taken more attention in power systems operations as improvement of voltage profile and minimizing system losses. In this way, this paper presents a multi-objective evolutionary algorithm (MOEA to solve optimal reactive power dispatch (ORPD problem with FACTS devices. This nonlinear multi-objective problem (MOP consists to minimize simultaneously real power loss in transmission lines and voltage deviation at load buses, by tuning parameters and searching the location of FACTS devices. The constraints of this MOP are divided to equality constraints represented by load flow equations and inequality constraints such as, generation reactive power sources and security limits at load buses. Two types of FACTS devices, static synchronous series compensator (SSSC and unified power flow controller (UPFC are considered. A comparative study regarding the effects of an SSSC and an UPFC on voltage deviation and total transmission real losses is carried out. The design problem is tested on a 6-bus system.

  20. Technological options to control quality of fish burgers.

    Science.gov (United States)

    Danza, A; Conte, A; Del Nobile, M A

    2017-06-01

    This research was focused on preservation strategies applied to develop fish burgers enriched with tomato flour and extra-virgin olive oil. The effects of three different gas mixtures (5:95 O 2 /CO 2 ; 10:60:30 O 2 /CO 2 /N 2 and 5:50:45 O 2 /CO 2 /N 2 ) on burger quality were analyzed by monitoring microbial cell load of main spoilage microorganisms, pH and sensory properties. As expected, modified atmosphere packaging significantly affected mesophilic bacteria with a reduction of about 2 log cycles for samples under 5% O 2 and 95% CO 2 . Afterward, the best gas mixture was used in combination with various natural antimicrobial compounds (thymol, grape fruit seed extract and biocitrus). The biocitrus showed the strike balance between microbial and sensory quality, thus suggesting to be adopted for dipping treatment of the entire fish fillet before the mincing process. Later all the strategies tested individually were combined and samples were monitored for microbiological and sensory quality. Results obtained showed that dipping treatment of fillet in biocitrus solution (20,000 ppm) under modified conditions extended the shelf life by 8 days compared to the control sample, without affecting the sensory acceptability.

  1. Fluid management technology: Liquid slosh dynamics and control

    Science.gov (United States)

    Dodge, Franklin T.; Green, Steven T.; Kana, Daniel D.

    1991-01-01

    Flight experiments were defined for the Cryogenic On-Orbit Liquid Depot Storage, Acquisition and Transfer Satellite (COLD-SAT) test bed satellite and the Shuttle middeck to help establish the influence of the gravitational environment on liquid slosh dynamics and control. Several analytical and experimental studies were also conducted to support the experiments and to help understand the anticipated results. Both FLOW-3D and NASA-VOF3D computer codes were utilized to simulate low Bond number, small amplitude sloshing, for which the motions are dominated by surface forces; it was found that neither code provided a satisfactory simulation. Thus, a new analysis of low Bond number sloshing was formulated, using an integral minimization technique that will allow the assumptions made about surface physics phenomena to be modified easily when better knowledge becomes available from flight experiments. Several examples were computed by the innovative use of a finite-element structural code. An existing spherical-pendulum analogy of nonlinear, rotary sloshing was also modified for easier use and extended to low-gravity conditions. Laboratory experiments were conducted to determine the requirements for liquid-vapor interface sensors as a method of resolving liquid surface motions in flight experiments. The feasibility of measuring the small slosh forces anticipated in flight experiments was also investigated.

  2. Technologies for the unified collection and control of UCAVs

    Science.gov (United States)

    Mahler, Ronald P. S.; Prasanth, Ravi

    2002-07-01

    The problem of managing swarms of UAVs consists of multi-agent collection (i.e., distributed robust data fusion and interpretation) and multi-agent coordination (i.e., distributed robust platform and sensor monitoring and control). This paper deals with a specific aspect of the latter, namely collision avoidance and trajectory generation problems in the presence of pop-up threats. These problems are difficult to solve because the set of feasible solutions is non-convex, possibly infinite dimensional and defined in terms of an infinite number of constraints. Recent approximation methods use a finite dimensional parameterization of solutions and impose constraints on a finite grid in time. They result in large feasibility problems and are at best only sufficient. We show that there is no need to grid if the admissible trajectories are restricted to polynomials of degree no larger than a specified bound. A finite dimensional necessary and sufficient condition, whose size depends only the assumed degree bound, is derived in this paper. It is used to improve some existing trajectory generation methods, develop new approximation methods and solve a collision avoidance problem exactly. Our techniques clearly show how certain non-convex constraints arising in path planning can be converted to mixed integer/LMI constraints.

  3. Investigation on food sanitation controlling technologies; Shokuhin eisei kanri gijutsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    Doi, Y. [Hokkaido Electric Power Co. Inc., Sapporo (Japan); Nishioka, J.

    2000-03-24

    Investigation has been made on the current status of food sanitation controlling technologies. Eighty percent of food poisoning is caused by bacte such as Salmonera, enteritis vibrio, staphylococcus, and pathogenic colibacillus. Putrefaction as the cause for food poisoning occurs from proliferation of different microorganisms. Heating sterilization is the main method being performed, but non-heating method may include sterilization by flash and high voltage pulse discharge in addition to ultra-high pressure and ultraviolet ray sterilization. As a result of the questionnaire survey, what is extracted as the problems in the food sanitation controlling technologies is to establish a rinsing and sterilizing method with large sterilization effect, an effective sterilizing method and thawing of processed marine products, and a cooling method in food processing. Increasingly demanded for the future is to develop a foodstuff sanitation control system using as the core the hazard analysis critical control point (HACCP, a quality control program developed by the U.S. NASA to ensure safety in manufacturing space food), and micro-organism control and sterilizing technologies to support the above system. The flash pulse and high-voltage pulse sterilizing technologies as the non-heating sterilizing technology are more effective than the conventional heating sterilization methods also from the aspect of quality retention after sterilization. More active development thereof is desired. (NEDO)

  4. Environmental control implications of generating electric power from coal. Technology status report. Volume I

    Energy Technology Data Exchange (ETDEWEB)

    None

    1976-12-01

    This is the first in a series of reports evaluating environmental control technologies applicable to the coal-to-electricity process. The technologies are described and evaluated from an engineering and cost perspective based upon the best available information obtained from utility experience and development work in progress. Environmental control regulations and the health effects of pollutants are also reviewed. Emphasis is placed primarily upon technologies that are now in use. For SO/sub 2/ control, these include the use of low sulfur coal, cleaned coal, or flue-gas desulfurization systems. Electrostatic precipitators and fabric filters used for the control of particulate matter are analyzed, and combustion modifications for NO/sub x/ control are described. In each area, advanced technologies still in the development stage are described briefly and evaluated on the basis of current knowledge. Fluidized bed-combustion (FBC) is a near-term technology that is discussed extensively in the report. The potential for control of SO/sub 2/ and NO/sub x/ emissions by use of FBC is analyzed, as are the resulting solid waste disposal problems, cost estimates, and its potential applicability to electric utility systems.

  5. JV Task 126 - Mercury Control Technologies for Electric Utilities Burning Bituminous Coal

    Energy Technology Data Exchange (ETDEWEB)

    Jason Laumb; John Kay; Michael Jones; Brandon Pavlish; Nicholas Lentz; Donald McCollor; Kevin Galbreath

    2009-03-29

    The EERC developed an applied research consortium project to test cost-effective mercury (Hg) control technologies for utilities burning bituminous coals. The project goal was to test innovative Hg control technologies that have the potential to reduce Hg emissions from bituminous coal-fired power plants by {ge}90% at costs of one-half to three-quarters of current estimates for activated carbon injection (ACI). Hg control technology evaluations were performed using the EERC's combustion test facility (CTF). The CTF was fired on pulverized bituminous coals at 550,000 Btu/hr (580 MJ/hr). The CTF was configured with the following air pollution control devices (APCDs): selective catalytic reduction (SCR) unit, electrostatic precipitator (ESP), and wet flue gas desulfurization system (WFDS). The Hg control technologies investigated as part of this project included ACI (three Norit Americas, Inc., and eleven Envergex sorbents), elemental mercury (Hg{sup 0}) oxidation catalysts (i.e., the noble metals in Hitachi Zosen, Cormetech, and Hitachi SCR catalysts), sorbent enhancement additives (SEAs) (a proprietary EERC additive, trona, and limestone), and blending with a Powder River Basin (PRB) subbituminous coal. These Hg control technologies were evaluated separately, and many were also tested in combination.

  6. The Opposite of Control: A Deweyan Perspective on Intrinsic Motivation in "After 3" Technology Programs.

    Science.gov (United States)

    Wong, D.; Packard, B.; Girod, M.; Pugh, K.

    2000-01-01

    Discusses intrinsic motivation and John Dewey's perspectives on aesthetic experiences in relation to "After 3" technology programs, based on experiences with KLICK (Kids Learning in Computer Klubhouses). Highlights include control and theories of motivation and learning; and Dewey's perspectives on the opposite of control in…

  7. 75 FR 22548 - Requirements for Control Technology Determinations for Major Sources in Accordance With Clean Air...

    Science.gov (United States)

    2010-04-29

    ... From the Federal Register Online via the Government Publishing Office ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 63 RIN 2060-AP91 Requirements for Control Technology Determinations for Major Sources... pollution control, Hazardous Air Pollutants, Reporting and Recordkeeping requirements. Dated: April 26, 2010...

  8. Biologically based technologies for control of soil-borne plant pathogens of cucumber and oilseed rape

    Science.gov (United States)

    Sustainable intensification of food production is necessary if we are to feed the world’s future population and maintain the resources required to produce this food. Biologically based technologies for disease control, such as microbial biological control agents and cover crops, can be integral to ...

  9. Review of innovations in digital health technology to promote weight control.

    Science.gov (United States)

    Thomas, J Graham; Bond, Dale S

    2014-01-01

    Advances in technology have contributed to the obesity epidemic and worsened health by reducing opportunities for physical activity and by the proliferation of inexpensive calorie-dense foods. However, much of the same technology can be used to counter these troublesome trends by fostering the development and maintenance of healthy eating and physical activity habits. In contrast to intensive face-to-face treatments, technology-based interventions also have the potential to reach large numbers of individuals at low cost. The purpose of this review is to discuss studies in which digital technology has been used for behavioral weight control, report on advances in consumer technology that are widely adopted but insufficiently tested, and explore potential future directions for both. Web-based, mobile (eg, smartphone), virtual reality, and gaming technologies are the focus of discussion. The best evidence exists to support the use of digital technology for self-monitoring of weight-related behaviors and outcomes. However, studies are underway that will provide additional, important information regarding how best to apply digital technology for behavioral weight control.

  10. Using Semantic Web Technologies to Develop Intrinsically Resilient Energy Control Systems

    Energy Technology Data Exchange (ETDEWEB)

    Sheldon, Frederick T [ORNL; Huang, Jingshan [ORNL; Fetzer, Daniel T [ORNL; Morris, Thomas H [ORNL; Jonathan, Kirsch [Siemens Corporate Research; Goose, Stuart [Siemens Corporate Research; Wei, Dong [Siemens Corporate Research; Dang, Jiangbo [Siemens Corporate Research; Manz, David [Pacific Northwest National Laboratory (PNNL)

    2012-01-01

    To preserve critical energy control functions while under attack, it is necessary to perform comprehensive analysis on root causes and impacts of cyber intrusions without sacrificing the availability of energy delivery. We propose to design an intrinsically resilient energy control system where we extensively utilize Semantic Web technologies, which play critical roles in knowledge representation and acquisition. While our ultimate goal is to ensure availability/resiliency of energy delivery functions and the capability to assess root causes and impacts of cyber intrusions, the focus of this paper is to demonstrate a proof of concept of how Semantic Web technologies can significantly contribute to resilient energy control systems.

  11. Organisational Aspects of Delegating Accounting and Controlling Authorities with the Use of Information and Communication Technologies

    Directory of Open Access Journals (Sweden)

    Muravskiy Volodymyr V.

    2013-11-01

    Full Text Available The article studies problems of application of information and communication technologies in accounting and control. It develops an organisational model of general accounting and control by an enterprise and outside firm on principles of delegation of accounting and controlling authorities, protection and distant data transfer. It considers a possibility of transformation of accounting principles from the position of the theory of accounting and informatics and also influence of information and communication technologies upon accounting principles. The article marks out changes in realisation of accounting principles in the computer communicative form of accounting.

  12. Gossamer-1: Mission concept and technology for a controlled deployment of gossamer spacecraft

    Science.gov (United States)

    Seefeldt, Patric; Spietz, Peter; Sproewitz, Tom; Grundmann, Jan Thimo; Hillebrandt, Martin; Hobbie, Catherin; Ruffer, Michael; Straubel, Marco; Tóth, Norbert; Zander, Martin

    2017-01-01

    Gossamer structures for innovative space applications, such as solar sails, require technology that allows their controlled and thereby safe deployment. Before employing such technology for a dedicated science mission, it is desirable, if not necessary, to demonstrate its reliability with a Technology Readiness Level (TRL) of six or higher. The aim of the work presented here is to provide reliable technology that enables the controlled deployment and verification of its functionality with various laboratory tests, thereby qualifying the hardware for a first demonstration in low Earth orbit (LEO). The development was made in the Gossamer-1 project of the German Aerospace Center (DLR). This paper provides an overview of the Gossamer-1 mission and hardware development. The system is designed based on the requirements of a technology demonstration mission. The design rests on a crossed boom configuration with triangular sail segments. Employing engineering models, all aspects of the deployment were tested under ambient environment. Several components were also subjected to environmental qualification testing. An innovative stowing and deployment strategy for a controlled deployment, as well as the designs of the bus system, mechanisms and electronics are described. The tests conducted provide insights into the deployment process and allow a mechanical characterization of that deployment process, in particular the measurement of the deployment forces. Deployment on system level could be successfully demonstrated to be robust and controllable. The deployment technology is on TRL four approaching level five, with a qualification model for environmental testing currently being built.

  13. Review of Literature on Terminal Box Control, Occupancy Sensing Technology and Multi-zone Demand Control Ventilation (DCV)

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Guopeng; Dasu, Aravind R.; Zhang, Jian

    2012-03-01

    This report presents an overall review of the standard requirement, the terminal box control, occupancy sensing technology and DCV. There is system-specific guidance for single-zone systems, but DCV application guidance for multi-zone variable air volume (VAV) systems is not available. No real-world implementation case studies have been found using the CO2-based DCV. The review results also show that the constant minimum air flow set point causes excessive fan power consumption and potential simultaneous heating and cooling. Occupancy-based control (OBC) is needed for the terminal box in order to achieve deep energy savings. Key to OBC is a technology for sensing the actual occupancy of the zone served in real time. Several technologies show promise, but none currently fully meets the need with adequate accuracy and sufficiently low cost.

  14. Pulp and paper program fact sheets

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    Summaries are presented of Argonne technology transfer research projects in: sustainable forest management, environmental performance, energy performance, improved capital effectiveness, recycling, and sensors and controls. Applications in paper/pulp industry, other industries, etc. are covered.

  15. Mathematical Modeling of Sterile Insect Technology for Control of Anopheles Mosquito

    Science.gov (United States)

    Anguelov, R.; Dumont, Y.; Lubuma, J.

    2011-11-01

    Sterile Insect Technology (SIT) is a nonpolluting method of insect control that relies on the release of sterile males. We study the effectiveness of the application of SIT for control of Anopheles mosquito via mathematical modeling. The theoretical analysis of the mathematical model as a dynamical system leads to the formulation of possible strategies for control of the Anopheles mosquito, also illustrated by numerical simulations.

  16. Robust Multivariable Flutter Suppression for the Benchmark Active Control Technology (BACT) Wind-Tunnel Model

    Science.gov (United States)

    Waszak, Martin R.

    1997-01-01

    The Benchmark Active Controls Technology (BACT) project is part of NASA Langley Research Center s Benchmark Models Program for studying transonic aeroelastic phenomena. In January of 1996 the BACT wind-tunnel model was used to successfully demonstrate the application of robust multivariable control design methods (H and -synthesis) to flutter suppression. This paper addresses the design and experimental evaluation of robust multivariable flutter suppression control laws with particular attention paid to the degree to which stability and performance robustness was achieved.

  17. Facts, principles, and (real) politics

    NARCIS (Netherlands)

    Rossi, E.

    2016-01-01

    Should our factual understanding of the world influence our normative theorising about it? G.A. Cohen has argued that our ultimate normative principles should not be constrained by facts (e.g. about feasibility, human nature, and so on). Many others have defended or are committed to various versions

  18. High Blood Pressure Fact Sheet

    Science.gov (United States)

    ... High Blood Pressure Salt Cholesterol Million Hearts® WISEWOMAN High Blood Pressure Fact Sheet Language: English (US) Español (Spanish) Recommend ... time. High blood pressure is also called hypertension. High Blood Pressure in the United States Having high blood pressure ...

  19. NASA Facts, The Viking Mission.

    Science.gov (United States)

    National Aeronautics and Space Administration, Washington, DC. Educational Programs Div.

    Presented is one of a series of publications of National Aeronautics and Space Administration (NASA) facts about the exploration of Mars. The Viking mission to Mars, consisting of two unmanned NASA spacecraft launched in August and September, 1975, is described. A description of the spacecraft and their paths is given. A diagram identifying the…

  20. NASA Facts, Mars and Earth.

    Science.gov (United States)

    National Aeronautics and Space Administration, Washington, DC. Educational Programs Div.

    Presented is one of a series of National Aeronautics and Space Administration (NASA) facts about the exploration of Mars. In this publication, emphasis is placed on the sun's planetary system with note made that there is no one theory for the origin and subsequent evolution of the Solar System that is generally accepted. Ideas from many scientists…

  1. Facts about Rubella for Adults

    Science.gov (United States)

    ... of an infected person. If a woman gets rubella during pregnancy, particularly during the first three months, her baby ... exhibit symptoms. FACT: If a pregnant woman gets rubella during the first three months of pregnancy, her baby has a good chance of having ...

  2. Norms and facts in measurement

    NARCIS (Netherlands)

    Brakel, J. van

    1984-01-01

    Publications concerned with the foundations of measurement often accept uncritically the theory/observation and the norm/fact distinction. However, measurement is measurement-in-a-context. This is analysed in the first part of the paper. Important aspects of this context are: the purpose of the

  3. Higher Education Act. Fact Sheet.

    Science.gov (United States)

    National Council on Disability, 2004

    2004-01-01

    This fact sheet highlights the challenges for students with disabilities in the nation's university system and recommends solutions that would result in better support systems for postsecondary students with disabilities. This document discusses several interrelated issues that impact student preparation and access to postsecondary education. The…

  4. Facts About: College Mental Health.

    Science.gov (United States)

    National Inst. of Mental Health (DHEW), Rockville, MD.

    Facts about college mental health are presented in response to frequently asked questions. Areas of concern include common conditions interfering with student effectiveness, why students seek help and where they can get it, the frequency of severe mental illness in college students, the suicide problem, the limitations of nonprofessional help, the…

  5. Thorndike Revisited--Some Facts

    Science.gov (United States)

    Tuinman, J. Jaap

    1971-01-01

    Examines some historical facts surrounding Thorndike's 1917 article, Reading as Reasoning: A Study of Mistakes in Paragraph Reading," (republished in Reading Research Quarterly, 1971, 6, 425-48), in an attempt to put the article in its proper perspective both as a research study and as a contribution to the psychology of reading. (VJ)

  6. Alzheimer's Disease Facts and Figures

    Medline Plus

    Full Text Available ... the number of people with this disease. As research advances a biomarker-based method for diagnosis and treatment at the earliest stages of Alzheimer's disease, we envision a future in which Alzheimer's disease is placed in the same category ... More Alzheimer's Disease Facts in Each State ...

  7. Advantages of new micro-jet welding technology on weld microstructure control

    Directory of Open Access Journals (Sweden)

    Jan PIWNIK

    2013-01-01

    Full Text Available An innovative apparatus to welding process with micro-jet cooling of the weld made it possible to carry out technological tests, which have proved theoretical considerations about this problem. This project gives real opportunities for professional development in the field of welding with controlling the parameters of weld structure. These tests have proved that the new micro-jet technology has the potential for growth. It may be great achievement of welding technology in order to increase weld metal strength. The new technology with micro-jet cooling may have many practical applications in many fields, for example such as in the transport industry or to repair damaged metal elements. The advantages of the new device over the traditional system are the ability to control the structure of the weld, the weld mechanical performance increases and improve the quality of welded joints.

  8. Application Research of Quality Control Technology of Asphalt Pavement based on GPS Intelligent

    Science.gov (United States)

    Wang, Min; Gao, Bo; Shang, Fei; Wang, Tao

    2017-10-01

    Due to the difficulty of steel deck pavement asphalt layer compaction caused by the effect of the flexible supporting system (orthotropic steel deck plate), it is usually hard and difficult to control for the site compactness to reach the design goal. The intelligent compaction technology is based on GPS control technology and real-time acquisition of actual compaction tracks, and then forms a cloud maps of compaction times, which guide the roller operator to do the compaction in accordance with the design requirement to ensure the deck compaction technology and compaction quality. From the actual construction situation of actual bridge and checked data, the intelligent compaction technology is significant in guaranteeing the steel deck asphalt pavement compactness and quality stability.

  9. Propulsion Control Technology Development in the United States A Historical Perspective

    Science.gov (United States)

    Jaw, Link C.a; Garg, Sanjay

    2005-01-01

    This paper presents a historical perspective of the advancement of control technologies for aircraft gas turbine engines. The paper primarily covers technology advances in the United States in the last 60 years (1940 to approximately 2002). The paper emphasizes the pioneering technologies that have been tested or implemented during this period, assimilating knowledge and experience from industry experts, including personal interviews with both current and retired experts. Since the first United States-built aircraft gas turbine engine was flown in 1942, engine control technology has evolved from a simple hydro-mechanical fuel metering valve to a full-authority digital electronic control system (FADEC) that is common to all modern aircraft propulsion systems. At the same time, control systems have provided engine diagnostic functions. Engine diagnostic capabilities have also evolved from pilot observation of engine gauges to the automated on-board diagnostic system that uses mathematical models to assess engine health and assist in post-flight troubleshooting and maintenance. Using system complexity and capability as a measure, we can break the historical development of control systems down to four phases: (1) the start-up phase (1942 to 1949), (2) the growth phase (1950 to 1969), (3) the electronic phase (1970 to 1989), and (4) the integration phase (1990 to 2002). In each phase, the state-of-the-art control technology is described and the engines that have become historical landmarks, from the control and diagnostic standpoint, are identified. Finally, a historical perspective of engine controls in the last 60 years is presented in terms of control system complexity, number of sensors, number of lines of software (or embedded code), and other factors.

  10. Design of a drone's control with a neuronal headset: searching the future technology

    OpenAIRE

    Fernández Serra, Enrique

    2015-01-01

    The project is about combining new engineering technologies with healthy investigation, using Brain Computer Interface (BCI) readings from a project external device. As a pilot project, a drone is going to be controlled by mind with a neuronal headset (EmotivEPOC+) and a personal computer (PC).The main goal is the investigation and development in neuroscience, building and walking through a bridge between engineering and medics’ technology, pulling forward the biomedical’s future and helping ...

  11. Commercialization of JPL Virtual Reality calibration and redundant manipulator control technologies

    Science.gov (United States)

    Kim, Won S.; Seraji, Homayoun; Fiorini, Paolo; Brown, Robert; Christensen, Brian; Beale, Chris; Karlen, James; Eismann, Paul

    1994-01-01

    Within NASA's recent thrust for industrial collaboration, JPL (Jet Propulsion Laboratory) has recently established two technology cooperation agreements in the robotics area: one on virtual reality (VR) calibration with Deneb Robotics, Inc., and the other on redundant manipulator control with Robotics Research Corporation (RRC). These technology transfer cooperation tasks will enable both Deneb and RRC to commercialize enhanced versions of their products that will greatly benefit both space and terrestrial telerobotic applications.

  12. Test-bed Assessment of Communication Technologies for a Power-Balancing Controller

    DEFF Research Database (Denmark)

    Findrik, Mislav; Pedersen, Rasmus; Hasenleithner, Eduard

    2016-01-01

    and control. In this paper, we present a Smart Grid test-bed that integrates various communication technologies and deploys a power balancing controller for LV grids. Control performance of the introduced power balancing controller is subsequently investigated and its robustness to communication network cross......Due to growing need for sustainable energy, increasing number of different renewable energy resources are being connected into distribution grids. In order to efficiently manage a decentralized power generation units, the smart grid will rely on communication networks for information exchange......-traffic is evaluated. Various scenarios are demonstrated, assessing impact of communication network performance on quality of control....

  13. An assessment of advanced displays and controls technology applicable to future space transportation systems

    Science.gov (United States)

    Hatfield, Jack J.; Villarreal, Diana

    1990-01-01

    The topic of advanced display and control technology is addressed along with the major objectives of this technology, the current state of the art, major accomplishments, research programs and facilities, future trends, technology issues, space transportation systems applications and projected technology readiness for those applications. The holes that may exist between the technology needs of the transportation systems versus the research that is currently under way are addressed, and cultural changes that might facilitate the incorporation of these advanced technologies into future space transportation systems are recommended. Some of the objectives are to reduce life cycle costs, improve reliability and fault tolerance, use of standards for the incorporation of advancing technology, and reduction of weight, volume and power. Pilot workload can be reduced and the pilot's situational awareness can be improved, which would result in improved flight safety and operating efficiency. This could be accomplished through the use of integrated, electronic pictorial displays, consolidated controls, artificial intelligence, and human centered automation tools. The Orbiter Glass Cockpit Display is an example examined.

  14. An Easy to Deploy Street Light Control System Based on Wireless Communication and LED Technology

    Directory of Open Access Journals (Sweden)

    Jesús Villadangos

    2013-05-01

    Full Text Available This paper presents an intelligent streetlight management system based on LED lamps, designed to facilitate its deployment in existing facilities. The proposed approach, which is based on wireless communication technologies, will minimize the cost of investment of traditional wired systems, which always need civil engineering for burying of cable underground and consequently are more expensive than if the connection of the different nodes is made over the air. The deployed solution will be aware of their surrounding’s environmental conditions, a fact that will be approached for the system intelligence in order to learn, and later, apply dynamic rules. The knowledge of real time illumination needs, in terms of instant use of the street in which it is installed, will also feed our system, with the objective of providing tangible solutions to reduce energy consumption according to the contextual needs, an exact calculation of energy consumption and reliable mechanisms for preventive maintenance of facilities.

  15. An easy to deploy street light control system based on wireless communication and LED technology.

    Science.gov (United States)

    Elejoste, Pilar; Angulo, Ignacio; Perallos, Asier; Chertudi, Aitor; Zuazola, Ignacio Julio García; Moreno, Asier; Azpilicueta, Leire; Astrain, José Javier; Falcone, Francisco; Villadangos, Jesús

    2013-05-16

    This paper presents an intelligent streetlight management system based on LED lamps, designed to facilitate its deployment in existing facilities. The proposed approach, which is based on wireless communication technologies, will minimize the cost of investment of traditional wired systems, which always need civil engineering for burying of cable underground and consequently are more expensive than if the connection of the different nodes is made over the air. The deployed solution will be aware of their surrounding's environmental conditions, a fact that will be approached for the system intelligence in order to learn, and later, apply dynamic rules. The knowledge of real time illumination needs, in terms of instant use of the street in which it is installed, will also feed our system, with the objective of providing tangible solutions to reduce energy consumption according to the contextual needs, an exact calculation of energy consumption and reliable mechanisms for preventive maintenance of facilities.

  16. An Easy to Deploy Street Light Control System Based on Wireless Communication and LED Technology

    Science.gov (United States)

    Elejoste, Pilar; Angulo, Ignacio; Perallos, Asier; Chertudi, Aitor; Zuazola, Ignacio Julio García; Moreno, Asier; Azpilicueta, Leire; Astrain, José Javier; Falcone, Francisco; Villadangos, Jesús

    2013-01-01

    This paper presents an intelligent streetlight management system based on LED lamps, designed to facilitate its deployment in existing facilities. The proposed approach, which is based on wireless communication technologies, will minimize the cost of investment of traditional wired systems, which always need civil engineering for burying of cable underground and consequently are more expensive than if the connection of the different nodes is made over the air. The deployed solution will be aware of their surrounding's environmental conditions, a fact that will be approached for the system intelligence in order to learn, and later, apply dynamic rules. The knowledge of real time illumination needs, in terms of instant use of the street in which it is installed, will also feed our system, with the objective of providing tangible solutions to reduce energy consumption according to the contextual needs, an exact calculation of energy consumption and reliable mechanisms for preventive maintenance of facilities. PMID:23681092

  17. Performance Benefits for a Turboshaft Engine Using Nonlinear Engine Control Technology Investigated

    Science.gov (United States)

    Jones, Scott M.

    2004-01-01

    The potential benefits of nonlinear engine control technology applied to a General Electric T700 helicopter engine were investigated. This technology is being developed by the U.S. Navy SPAWAR Systems Center for a variety of applications. When used as a means of active stability control, nonlinear engine control technology uses sensors and small amounts of injected air to allow compressors to operate with reduced stall margin, which can improve engine pressure ratio. The focus of this study was to determine the best achievable reduction in fuel consumption for the T700 turboshaft engine. A customer deck (computer code) was provided by General Electric to calculate the T700 engine performance, and the NASA Glenn Research Center used this code to perform the analysis. The results showed a 2- to 5-percent reduction in brake specific fuel consumption (BSFC) at the three Sikorsky H-60 helicopter operating points of cruise, loiter, and hover.

  18. Nuclear Technology Requires Control by the People, anywhere on Our Planet.

    Science.gov (United States)

    Synek, Miroslav

    2000-03-01

    ------- Human society on our planet, in its historical development, utilizing the knowledge of physics, has reached a powerful technology of nuclear intercontinental ballistic missiles, conceivably controllable through a computerized "push-button". Whenever this technology falls under the control of an irresponsible , miscalculating, or, insane, DICTATOR, with powerful means of a mass-produced nuclear built-up, anywhere on our planet, the very survival of all humanity on our planet could be threatened. --- Therefore, it is a historical urgency that this technology is under the control by a government of the people, by the people and for the people, based on a sufficiently secure system of FREE ELECTIONS, in any country on our planet, wherever and whenever such a threatening possibility exists.

  19. New command centre of the Lech Power Works. Planning and execution of command and control technology

    Energy Technology Data Exchange (ETDEWEB)

    Marschall, J.

    1985-10-28

    On February 25, 1985 the Lech Electricity Works in Augsburg took into service their new control centre for the operational control of the entire maximum, high and low voltage networks. As the replacement for the now outpaced old control centre it was installed along the most modern lines under retention of the remote control substations. The total of eight combined operation process computer AEG 80-30 charaterise the scope of the network command technology, whereby in several subsectors completely new paths were trodden for the first time. So for example the design of light technology, the monitor display illumination and the graphical system Gradas which controls the medium voltage network, operation using digitizer and the operation telecommunications system. (orig.).

  20. Marijuana: Facts Parents Need to Know

    Science.gov (United States)

    ... Parents Need to Know » A Letter to Parents Marijuana: Facts Parents Need to Know Email Facebook Twitter ... their children to review the scientific facts about marijuana: (1) Marijuana: Facts Parents Need to Know and ( ...

  1. Oral Health in the US: Key Facts

    Science.gov (United States)

    ... Policy Oral Health in the U.S.: Key Facts Oral Health in the U.S.: Key Facts Published: Jun 01, ... Email Print This fact sheet provides data on oral health care coverage and access for children, nonelderly adults ...

  2. Vitamin and Mineral Supplement Fact Sheets

    Science.gov (United States)

    ... website Submit Search NIH Office of Dietary Supplements Vitamin and Mineral Supplement Fact Sheets Search the list ... Supplements: Background Information Botanical Dietary Supplements: Background Information Vitamin and Mineral Fact Sheets Botanical Supplement Fact Sheets ...

  3. DISTURBANCE ERROR INVARIANCE IN AUTOMATIC CONTROL SYSTEMS FOR TECHNOLOGICAL OBJECT TRAJECTORY MOVEMENT

    Directory of Open Access Journals (Sweden)

    A. V. Lekareva

    2016-09-01

    Full Text Available We consider combined control in automatic control systems for technological objects trajectory movements. We present research results of the system disturbance invariance ensuring on the example of the technological manipulator that implements hydrocutting of the oil pipelines. Control is based on the propositions of the fourth modified invariance form with the use of bootstrapping methods. The paper presents analysis of results obtained by two different correction methods. The essence of the first method lies in injection of additional component into the already established control signal and formation of the channel for that component. Control signal correction during the signal synthesis stage in the control device constitutes the basis for the second method. Research results have shown high efficiency of application for both correction methods. Both methods have roughly the same precision. We have shown that the correction in the control device is preferable because it has no influence on the inner contour of the system. We have shown the necessity of the block usage with the variable transmission coefficient, which value is determined by technological trajectory parameters. Research results can be applied in practice for improvement of the precision specifications of automatic control systems for trajectorial manipulators.

  4. Five Indisputable Facts on Modern Power Systems

    Energy Technology Data Exchange (ETDEWEB)

    Bloom, Aaron P [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Brinkman, Gregory L [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Lopez, Anthony J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Holttinen, Hannele [VTT Technical Research Centre of Finland; Helman, Udi [Helman Analytics; Summers, Kate [Pacific Hydro; Bakke, Jordan [Midcontinent Independent System Operator

    2017-08-01

    This presentation overviews five indisputable facts about modern power systems: Fact one: The grid can handle more renewable generation than previously thought. Fact two: Geographic and resource diversity provide additional reliability to the system. Fact three: Wind and solar forecasting provide significant value. Fact four: Our electric power markets were not originally designed for variable renewables -- but they could be adapted. Fact five: Modern power electronics are creating new sources of essential reliability services.

  5. Transforming Learning with Technology: Beyond Modernism and Post-Modernism or Whoever Controls the Technology Creates the Reality.

    Science.gov (United States)

    Jonassen, David H.

    2000-01-01

    Contrasts modern and post-modern views of technology and suggests a newer, transformative view of educational technology in an effort to explain why technology has failed and to provide a vision for how it could work. Discusses technology as teaching medium; technology as power; technoglobalism; and mediating the social con-construction of…

  6. Preferences for technology versus human assistance and control over technology in the performance of kitchen and personal care tasks in baby boomers and older adults.

    Science.gov (United States)

    Beach, Scott R; Schulz, Richard; Matthews, Judith T; Courtney, Karen; Dabbs, Annette DeVito

    2014-11-01

    Quality of Life technology (QoLT) stresses humans and technology as mutually dependent and aware, working together to improve task performance and quality of life. This study examines preferences for technology versus human assistance and control in the context of QoLT. Data are from a nationally representative, cross-sectional web-based sample of 416 US baby boomers (45-64) and 114 older adults (65+) on preferences for technology versus human assistance and control in the performance of kitchen and personal care tasks. Multinomial logistic regression and ordinary least squares regression were used to determine predictors of these preferences. Respondents were generally accepting of technology assistance but wanted to maintain control over its' operation. Baby boomers were more likely to prefer technology than older adults, and those with fewer QoLT privacy concerns and who thought they were more likely to need future help were more likely to prefer technology over human assistance and more willing to relinquish control to technology. Results suggest the need for design of person- and context-aware QoLT systems that are responsive to user desires for level of control over operation of the technology. The predictors of these preferences suggest potentially receptive markets for the targeting of QoLT systems.

  7. Advanced technology of transformer winding condition control based on nanosecond probing impulse

    Directory of Open Access Journals (Sweden)

    Valeriy A. Lavrinovich

    2016-09-01

    Full Text Available One of the prospects of resource-effective technologies in power industry is control of electric equipment condition. Effectiveness of any electrical energy system strongly depends on stable work of power supply equipment. It, in turn, is defined by timely and reliable control of equipment condition. Power transformers are the key element of an electrical energy system. Winding defects caused by short circuit currents are the reason for an emergency situation. Reliable control of winding condition is an urgent task of modern power engineering technology. This paper deals with the experimental research of pulsed method of transformer winding control. A new approach to the winding condition control technology is described. The proposed method is based on short nanosecond range (compared to typical pulsed technology probing impulse and front impulse durations. Experimental results of sensitivity growth at the nanosecond probing impulse duration are shown. Experimental equipment and measurements are described. Comparison of experimental results of the proposed pulsed method and FRA is given. It is shown that probing impulse of nanosecond duration allows upgrading sensitivity of diagnostics procedure. The main proposals are confirmed by measurement results obtained in the electric energy system transformer for different types of winding defects.

  8. Food intolerance- facts and myths

    OpenAIRE

    Ptáčková, Zuzana

    2017-01-01

    This bachelor's thesis focuses on the facts and myths about two kinds of food intolerance: celiac disease and lactose intolerance. The thesis consists of a practical and a theoretical part. The theoretical part is further divided into three sections. The first one focuses on celiac disease and describes gluten, epidemiology, etiology, pathogenesis, symptoms of the disease, diagnostics, dietary solutions, celiac disease screening, other similar diseases and also a comparison of allergy to glut...

  9. International waste management fact book

    Energy Technology Data Exchange (ETDEWEB)

    Amaya, J P; LaMarche, M N; Upton, J F

    1997-10-01

    Many countries around the world are faced with nuclear and environmental management problems similar to those being addressed by the US Department of Energy. The purpose of this Fact Book is to provide the latest information on US and international organizations, programs, activities and key personnel to promote mutual cooperation to solve these problems. Areas addressed include all aspects of closing the commercial and nuclear fuel cycle and managing the wastes and sites from defense-related, nuclear materials production programs.

  10. Research on assembly reliability control technology for computer numerical control machine tools

    Directory of Open Access Journals (Sweden)

    Yan Ran

    2017-01-01

    Full Text Available Nowadays, although more and more companies focus on improving the quality of computer numerical control machine tools, its reliability control still remains as an unsolved problem. Since assembly reliability control is very important in product reliability assurance in China, a new key assembly processes extraction method based on the integration of quality function deployment; failure mode, effects, and criticality analysis; and fuzzy theory for computer numerical control machine tools is proposed. Firstly, assembly faults and assembly reliability control flow of computer numerical control machine tools are studied. Secondly, quality function deployment; failure mode, effects, and criticality analysis; and fuzzy theory are integrated to build a scientific extraction model, by which the key assembly processes meeting both customer functional demands and failure data distribution can be extracted, also an example is given to illustrate the correctness and effectiveness of the method. Finally, the assembly reliability monitoring system is established based on key assembly processes to realize and simplify this method.

  11. Achievement of digital control technology on high-power silicon controlled rectifier

    Science.gov (United States)

    Gao, Yinhan; Sun, Qiang; Liu, Changying

    2008-10-01

    To fulfill the need of experimental DC supply of subway inverter, this paper designs and develops a set of rectifier system of 160kW, output voltage can be adjusted from 500V to 900V. This article uses SCR as main switches, the trigger circuit adopts digital trigger circuit, the control of whole system is achieved by DSP. The main control method is digital PI, which used to control the output DC voltage to be dynamically stable. The main circuit parameters and control method are simulated by MATLAB/Simulink. The results validate the system design.

  12. Historical Review of the Transportation Analysis Fact of the Week, 1996-2017

    Energy Technology Data Exchange (ETDEWEB)

    Gohlke, David [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Davis, Stacy Cagle [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-10-01

    The Vehicle Technologies Office in the United States Department of Energy hosts a transportation analysis fact of the week on its webpage. As of October 2017, one thousand facts have been published since 1996. Examining the themes of published facts allows one to trace analytical trends determined to be of interest to the public over this time. The most popular themes addressed in the Fact of the Week were vehicle fuel economy, petroleum use and production, vehicle sales, and traveler behavior. Facts on vehicle electrification and advanced combustion technologies have been more popular in the last few years, showing their relevance to the Department of Energy mission.

  13. Enabling Patient Control of Personal Electronic Health Records Through Distributed Ledger Technology.

    Science.gov (United States)

    Cunningham, James; Ainsworth, John

    2017-01-01

    The rise of distributed ledger technology, initiated and exemplified by the Bitcoin blockchain, is having an increasing impact on information technology environments in which there is an emphasis on trust and security. Management of electronic health records, where both conformation to legislative regulations and maintenance of public trust are paramount, is an area where the impact of these new technologies may be particularly beneficial. We present a system that enables fine-grained personalized control of third-party access to patients' electronic health records, allowing individuals to specify when and how their records are accessed for research purposes. The use of the smart contract based Ethereum blockchain technology to implement this system allows it to operate in a verifiably secure, trustless, and openly auditable environment, features crucial to health information systems moving forward.

  14. Information and Communications Technologies, Coordination and Control, and the Distribution of Income

    OpenAIRE

    Guy, Frederick; Skott, Peter

    2008-01-01

    We consider the links between information and communications technologies (ICTs) and the distribution of income, as mediated by problems of coordination and control within organizations. In the large corporations of the mid-twentieth century, a highly developed division of labor was coordinated and controlled with the aid of relatively underdeveloped ICTs. This created a situation in which the options of top manage- ment were constrained while the individual and collective power of lower paid...

  15. Using OPC technology to support the study of advanced process control.

    Science.gov (United States)

    Mahmoud, Magdi S; Sabih, Muhammad; Elshafei, Moustafa

    2015-03-01

    OPC, originally the Object Linking and Embedding (OLE) for Process Control, brings a broad communication opportunity between different kinds of control systems. This paper investigates the use of OPC technology for the study of distributed control systems (DCS) as a cost effective and flexible research tool for the development and testing of advanced process control (APC) techniques in university research centers. Co-Simulation environment based on Matlab, LabVIEW and TCP/IP network is presented here. Several implementation issues and OPC based client/server control application have been addressed for TCP/IP network. A nonlinear boiler model is simulated as OPC server and OPC client is used for closed loop model identification, and to design a Model Predictive Controller. The MPC is able to control the NOx emissions in addition to drum water level and steam pressure. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

  16. Technology Reinvestment Program/Advanced ``Zero Emission'' Control Valve (Phase II)

    Energy Technology Data Exchange (ETDEWEB)

    J. Napoleon

    1998-12-01

    The objectives of this effort are to determine, develop and demonstrate the feasibility of significantly reducing the cost and expanding the applications for a family of Advanced Zero Emissions Control Valves that meets the fugitive emissions requirements of the 1990 Amendments to the Clean Air Act. This program is a direct technology spin-off from the valve technology that is critical to the US Navy's Nuclear Powered Fleet. These zero emissions valves will allow the Hydrocarbon and Chemical Processing Industries, etc., to maintain their competitiveness and still meet environmental and safety requirements. Phase 2 is directed at refining the basic technologies developed during Phase 1 so that they can be more readily selected and utilized by the target market. In addition to various necessary certifications, the project will develop a full featured digital controller with ``smart valve'' growth capability, expanding valve sizes/applications and identifying valve materials to permit applications in severe operational environments.

  17. REMOTE SYNTHESIS AND CONTROL INFORMATION TECHNOLOGY OF SYSTEM-DYNAMIC MODELS

    Directory of Open Access Journals (Sweden)

    A. V. Masloboev

    2015-07-01

    Full Text Available The general line of research is concerned with development of information technologies and computer simulation tools for management information and analytical support of complex semistructured systems. Regional socio-economic systems are consideredas a representative of this system type. Investigation is carried out within the bounds of development strategy implementation of the Arctic zone of the Russian Federation and national safety until 2020 in the Murmansk region, specifically under engineering of high end information infrastructure for innovation and security control problem-solving of regional development. Research methodology consists of system dynamics modeling method, distributed information system engineering technologies, pattern-based modeling and design techniques. The work deals with development of toolkit for decision-making information support problem-solving in the field of innovation security management of regional economics. For that purpose a system-dynamic models suite of innovation process standard components and information technology for remote formation and control of innovation business simulation models under research have been developed. Designed toolkit provides innovation security index dynamics forecasting and innovation business effectiveness of regional economics. Information technology is implemented within the bounds of thin client architecture and is intended for simulation models design process automation of complex systems. Technology implementation software tools provide pattern-based system-dynamic models distributed formation and simulation control of innovation processes. The technology provides availability and reusability index enhancement of information support facilities in application to innovation process simulation at the expense of distributed access to innovation business simulation modeling tools and model synthesis by the reusable components, simulating standard elements of innovation

  18. Demonstration of Electro-Osmotic Pulse Technology for Groundwater Intrusion Control in Concrete Structures.

    Science.gov (United States)

    1998-04-01

    humidity and mold problems. This study demonstrated and document the effectiveness of EOP technology to control groundwater intrusion in concrete ... structures at Fort Jackson, SC and McAlester Army Ammunition Plant (AAP), OK. The cost of installation was determined to be 40 percent lower than the cost of

  19. Space Technology: Propulsion, Control and Guidance of Space Vehicles. Aerospace Education III. Instructional Unit II.

    Science.gov (United States)

    Air Univ., Maxwell AFB, AL. Junior Reserve Office Training Corps.

    This curriculum guide is prepared for the Aerospace Education III series publication entitled "Space Technology: Propulsion, Control and Guidance of Space Vehicles." It provides guidelines for each chapter. The guide includes objectives, behavioral objectives, suggested outline, orientation, suggested key points, suggestions for…

  20. 75 FR 15655 - Requirements for Control Technology Determinations for Major Sources in Accordance With Clean Air...

    Science.gov (United States)

    2010-03-30

    ... AGENCY 40 CFR Part 63 RIN 2060-AP91 Requirements for Control Technology Determinations for Major Sources... for 112(g) equivalency determination under paragraph (a)(2) of this section. (2) The requirements in...'s long-standing position is that the ``hammer'' requirements of CAA section 112(j) apply in the case...