WorldWideScience

Sample records for controlling helicoverpa armigera

  1. Modelling biological control with wild-type and genetically modified baculoviruses in the Helicoverpa armigera-cotton system

    NARCIS (Netherlands)

    Sun, X.; Werf, van der W.; Bianchi, F.J.J.A.; Hu, Z.; Vlak, J.M.

    2006-01-01

    A comprehensive model was developed to simulate virus epizootics in a stage structured insect population and analyse scenarios for the biological control of cotton bollworm (CBW), Helicoverpa armigera, in cotton, using wild-type or genetically modified baculoviruses. In simulations on dosage and

  2. Natural control of Helicoverpa armigera in smallholder crops in East Africa

    NARCIS (Netherlands)

    Berg, van den H.

    1993-01-01

    The African bollworm, Helicoverpa (=Heliothis) armigera , is one of the worst agricultural pests in Africa, attacking a variety of food and cash crops. For development of sustainable pest management, it is essential to study the ecology and natural

  3. Emamectin benzoate: new insecticide against Helicoverpa armigera.

    Science.gov (United States)

    Fanigliulo, A; Sacchetti, M

    2008-01-01

    Emamectin benzoate is a new insecticide of Syngenta Crop Protection, with a new mechanism of action and a strong activity against Lepidoptera as well as with and a high selectivity on useful organisms. This molecule acts if swallowed and has some contact action. It penetrates leaf tissues (translaminar activity) and forms a reservoir within the leaf. The mechanism of action is unique in the panorama of insecticides. In facts, it inhibits muscle contraction, causing a continuous flow of chlorine ions in the GABA and H-Glutamate receptor sites. During 2006 and 2007, experimentation was performed by the Bioagritest test facility, according to EPPO guidelines and Principles of Good Experimental Practice (GEP), aiming at establishing the biological efficacy and the selectivity of Emamectin benzoate on industry tomato against Helicoverpa armigera (Lepidoptera: Noctuidoe). The study was performed in Tursi-Policoro (Matera), southern Italy. Experimental design consisted in random blocks, in 4 repetitions. A dosage of 1.5 Kg/ha of the formulate was compared with two commercial formulates: Spinosad 0.2 kg/ha (Laser, Dow Agrosciences Italia) and Indoxacarb 0.125 kg/ha (Steward EC insecticide, Dupont). Three foliage applications were applied every 8 days. The severity of damage induced by H. armigera was evaluated on fruits. Eventual phytotoxic effects were also evaluated. Climatic conditions were optimal for Lepidoptera development, so that the percentage of fruits attacked in 2007 at the first scouting was 68.28%. Emamectin benzoate has shown, in two years of testing, a high control of H. armigera if compared with the standards Indoxacarb and Spinosad. No effect of phytotoxicity was noticed on fruits.

  4. Radiation Induced F-1 Sterility For The Control Of Cotton Bollworm , Helicoverpa armigera (Huebner) In Pilot Test

    International Nuclear Information System (INIS)

    Segsarnviriya, Suchada; Pransopon, Prapon; Kongratarpon, Titima; Vongcheeree, Satit

    2005-10-01

    Pilot trials of radiation induced F-1 sterility for the control of cotton bollworm Helicoverpa armigera (Hubner) were studied for 3 cotton crop seasons in 3 locations at Amphor Takfa, Nakornsawan province in 2002, 2003 and 2004. Irradiated male pupae at a sub sterilizing dose of 150 Gy were released : approximately 11,170 42,900 and 36,400 pupae from July to December of 2002, 2003 and 2004, respectively. The insecticide plots were maintained as a comparison to determine the efficiency of this method. Checking of larvae on cotton plants by the systematic random sampling method and the cotton yield were used to evaluate the impact of the pupal release. It was found that the releasing plots and the insecticide plots gave similar results in terms of the number of larvae and the cotton yield. Therefore, the F-1 sterility method was a possible method for the control of cotton bollworm

  5. Gamma radiation for all phases of life cycle of cotton bollworm Helicoverpa armigera aiming at its control

    Energy Technology Data Exchange (ETDEWEB)

    Haddad, Gianni Q.; Arthur, Valter, E-mail: ghaddad2001@yahoo.com.br, E-mail: arthur@cena.usp.br [Centro de Energia Nuclear na Agricultura (CENA/USP), Piracicaba, SP (Brazil). Laboratório de Radiobiologia e Ambiente; Machi, André R., E-mail: rica_machi@hotmail.com [Instituto de Pesquisas Energéticas e Nucleares (IPEN/CNEN-SP), São Paulo, SP (Brazil)

    2017-07-01

    Since the 1950s, scientists have used ionizing radiation to sterilize insects, which are released in nature to mate, but without any progeny. Known as the sterile insect technique (SIT), this insect control method traditionally uses ionizing radiations to sterilize insects, being a technique that does not generate residue, and can act in synergy with the other techniques within integrated pest management. For several years, Brazil has been fighting against the increase of pests, introducing new tactics and techniques within IPM programs, to overcome the resistance of chemical products, such as: reducing residues of pesticides. For some important crops of our country, we have a wide spectrum of pests occurring from beginning to end of the harvest, one of them is the cotton crop and among the key pests of this crop, we have some extremely important caterpillars among them Helicoverpa armigera. Due to this the objective this study was establishes doses of gamma radiation to sterilizing of the phases of : eggs, larvae, pupae and adults of H. armigera aiming their control. The experiment was carried out with application of gamma radiation from a Cobalt-60 source. The treatments consisted of doses of gamma radiation varying of according with the insect phase, being this variation of: 0 (control) to 400 Gy. The experiments with pupae and adult phases showed satisfactory results in the sterilization of H. armigera for use in autocide control programs. The sterilize dose to adult and pupae phase were 400 Gy and 100 Gy respectively, being the best doses for the application of the sterile insect technique to this pest in cotton. (author)

  6. Gamma radiation for all phases of life cycle of cotton bollworm Helicoverpa armigera aiming at its control

    International Nuclear Information System (INIS)

    Haddad, Gianni Q.; Arthur, Valter

    2017-01-01

    Since the 1950s, scientists have used ionizing radiation to sterilize insects, which are released in nature to mate, but without any progeny. Known as the sterile insect technique (SIT), this insect control method traditionally uses ionizing radiations to sterilize insects, being a technique that does not generate residue, and can act in synergy with the other techniques within integrated pest management. For several years, Brazil has been fighting against the increase of pests, introducing new tactics and techniques within IPM programs, to overcome the resistance of chemical products, such as: reducing residues of pesticides. For some important crops of our country, we have a wide spectrum of pests occurring from beginning to end of the harvest, one of them is the cotton crop and among the key pests of this crop, we have some extremely important caterpillars among them Helicoverpa armigera. Due to this the objective this study was establishes doses of gamma radiation to sterilizing of the phases of : eggs, larvae, pupae and adults of H. armigera aiming their control. The experiment was carried out with application of gamma radiation from a Cobalt-60 source. The treatments consisted of doses of gamma radiation varying of according with the insect phase, being this variation of: 0 (control) to 400 Gy. The experiments with pupae and adult phases showed satisfactory results in the sterilization of H. armigera for use in autocide control programs. The sterilize dose to adult and pupae phase were 400 Gy and 100 Gy respectively, being the best doses for the application of the sterile insect technique to this pest in cotton. (author)

  7. The preliminary studies on parasitization of Trichogramma chilonis on Helicoverpa armigera eggs and eggs from irradiated Helicoverpa armigera moths

    International Nuclear Information System (INIS)

    Wang Endong; Lu Daguang; Liu Xiaohui; Li Yongjun; Zhang Shuyong; Liu Qiongru; Wang Huasong

    2002-01-01

    The parasitization rates of Trichogramma chilonis on 250 Gy irradiated and unirradiated fresh eggs of cotton bollworm, Helicoverpa armigera, were not significantly different. The parasitization rate on irradiated chill-stored eggs of H. armigera was lower than that on irradiated fresh eggs. The parasitization rates on eggs from 250 Gy irradiated H. armigera moths depended on their embryonated rates

  8. Bollworm responses to release of genetically modified Helicoverpa armigera nucleopolyhedroviruses in cotton

    NARCIS (Netherlands)

    Sun, X.; Chen, X.; Zhang, Z.; Wang, H.; Bianchi, F.J.J.A.; Peng, H.; Vlak, J.M.; Hu, Z.

    2002-01-01

    Helicoverpa armigera single nucleocapsid nucleopolyhedrovirus (HaSNPV) has been developed as a commercial biopesticide to control the cotton bollworm, H. armigera, in China. The major limitation to a broader application of this virus has been the relative long time to incapacitate the target insect.

  9. Field inactivation of wild-type and genetically modified Helicoverpa armigera single nucleocapsid nucleopolyhedrovirus in cotton

    NARCIS (Netherlands)

    Sun, X.; Sun, X.C.; Werf, van der W.; Vlak, J.M.; Hu, Z.H.

    2004-01-01

    Cotton bollworm (Helicoverpa armigera) is a serious pest on cotton in China. A specific baculovirus, H. armigera nucleopolyhedroviruses (HaSNPV) is used as a commercial biopesticide to control this pest. To improve the pesticidal properties, HaSNPV has been genetically engineered by both deleting

  10. Formulation of A Novel Phytopesticide PONNEEM and its Potentiality to control generalist Herbivorous Lepidopteran insect pests, Spodoptera litura (Fabricius and Helicoverpa armigera (H übner (Lepidoptera: Noctuidae

    Directory of Open Access Journals (Sweden)

    Susaimanickam Maria Packiam

    2012-10-01

    Full Text Available Objective: To evaluate the deterrence of oviposition potentiality of a novel phytopesticide PONNEEM against the generalist herbivorous lepidopteran insect pests Helicoverpa armigera and Spodoptera litura. Methods: Different phytopesticidal formulations were prepared at different ratio to evaluate the deterrence of oviposition activity against S. litura and H. armigera at 5, 10, 15, and 20毺 L/L concentrations. Results: The newly formulated different phytopesticides exhibited good results of oviposition deterrent activity against these two polyphagous insect pests. At 20毺 L/L concentration of PONNEEM, 77.48% of the maximum deterrence of oviposition activity was recorded, followed by formulation A (49.23%. And 68.12% was observed against H. armigera followed by A (49.52%. PONNEEM exhibited statistically significant oviposition deterrent activity compared to all other treatments. Conclusions: The newly formulated PONNEEM was found to be effective phytopesticidal formulation to control the adult of S. litura and H. armigera due to the synergistic effect of biomolecules such as azadirachtin and karanjin. This is the first report of PONNEEM which was patented under the government of India. The potential use of this novel phytopesticide could be an agent of controlling the adults of lepidopteran insect pests which can be applied in the integrated pest management programme.

  11. A droplet digital PCR (ddPCR) assay to detect Helicoverpa armigera (Lepidoptera: Noctuidae) in bulk trap samples

    Science.gov (United States)

    Moths in the genus Helicoverpa are some of the most important agricultural pests in the world. Two species, H. armigera (Hübner) and H. zea (Boddie), cause the majority of damage to crops and millions of dollars are spent annually on control of these pests. The recent introduction of H. armigera int...

  12. Immune responses of Helicoverpa armigera to different kinds of pathogens

    Directory of Open Access Journals (Sweden)

    Zhao Xiao-Fan

    2010-03-01

    Full Text Available Abstract Background Insects react against pathogens through innate immunity. The cotton bollworm Helicoverpa armigera (H. armigera is an important defoliator and an extremely destructive pest insect of many crops. The elucidation of the mechanism of the immune response of H. armigera to various pathogens can provide a theoretical basis for new approaches to biologically control this pest. Results Four kinds of pathogens Bacillus thuringiensis, Klebsiella pneumoniae, Candida albicans, and Autographa californica multiple nucleocapsid nucleopolyhedrovirus harbored green fluorescence protein and polyhedron (AcMNPV-GFP were used to challenge the insect. The cellular and humoral immune responses to the pathogens were analyzed in the challenged H. armigera. The results show that in the five kinds of haemocytes, only granulocytes phagocytized the Gram-negative and Gram-positive bacteria and fungi. All haemocytes can be infected by AcMNPV. Fourteen immune-related genes including pattern recognition receptors (PRRs such as peptidoglycan recognition proteins (HaPGRP and HaPGRP C and Gram-Negative Bacteria-Binding Protein (HaGNBP, and antimicrobial peptides (AMPs such as cecropin-1, 2 and 3 (HaCec-1, 2 and 3, lysozyme (HaLys, attacin (HaAtt, gallerimycin-like (HaGall, gloverin-like (HaGlo, moricin-like (HaMor, cobatoxin-like (HaCob, galiomicin-like (HaGali, and immune inducible protein (HaIip appeared in different expression profiles to different pathogen infections. The transcripts of 13 immune related genes (except HaPGRPC are obviously up-regulated by Gram-positive bacteria. HaCec-1 and 3, HaMor, HaAtt, HaLys, HaIip, HaPGRP and HaGNBP are greatly up-regulated after fungal infection. HaGNBP, HaCec-2, HaGall, HaGlo, HaMor, HaCob, HaGali obviously increased in Gram-negative bacterial infection. Only five genes, HaGNBP, HaCec-1, HaGali, HaGlo, and HaLys, are weakly up-regulated after viral infection. The AMP transcripts had higher expression levels than the

  13. The sequence of the Helicoverpa armigera single nucleocapsid nucleopolyhedrovirus genome

    NARCIS (Netherlands)

    Chen, X.; IJkel, W.F.J.; Tarchini, R.; Sun, X.; Sandbrink, H.; Wang, H.; Peters, S.; Zuidema, D.; Klein Lankhorst, R.; Vlak, J.M.; Hu, Z.

    2001-01-01

    The nucleotide sequence of the Helicoverpa armigera single-nucleocapsid nucleopolyhedrovirus (HaSNPV) DNA genome was determined and analysed. The circular genome encompasses 131 403 bp, has a G C content of 39.1 molnd contains five homologous regions with a unique pattern of repeats.

  14. Hybridization between Helicoverpa armigera and Helicoverpa assulta (Lepidoptera: Noctuidae): development and morphological characterization of F1 hybrids

    NARCIS (Netherlands)

    Zhao, X.C.; Dong, J.F.; Tang, Q.B.; Yan, Q.B.; Celbic, I.; Loon, van J.J.A.; Wang, C.Z.

    2005-01-01

    Reciprocal hybridizations between Helicoverpa armigera (Hubner) and Helicoverpa assulta (Guenee) were studied. The cross between females of H. armigera and males of H. assulta yielded only fertile males and sterile individuals lacking an aedeagus, valva or ostium bursae. A total of 492 larvae of the

  15. Effects of Soil Salinity on the Expression of Bt Toxin (Cry1Ac and the Control Efficiency of Helicoverpa armigera in Field-Grown Transgenic Bt Cotton.

    Directory of Open Access Journals (Sweden)

    Jun-Yu Luo

    Full Text Available An increasing area of transgenic Bacillus thuringiensis (Bt cotton is being planted in saline-alkaline soil in China. The Bt protein level in transgenic cotton plants and its control efficiency can be affected by abiotic stress, including high temperature, water deficiency and other factors. However, how soil salinity affects the expression of Bt protein, thus influencing the control efficiency of Bt cotton against the cotton bollworm (CBW Helicoverpa armigera (Hübner in the field, is poorly understood. Our objective in the present study was to investigate the effects of soil salinity on the expression of Bt toxin (Cry1Ac and the control efficiency of Helicoverpa armigera in field-grown transgenic Bt cotton using three natural saline levels (1.15 dS m-1 [low soil-salinity], 6.00 dS m-1 [medium soil-salinity] and 11.46 dS m-1 [high soil-salinity]. We found that the Bt protein content in the transgenic Bt cotton leaves and the insecticidal activity of Bt cotton against CBW decreased with the increasing soil salinity in laboratory experiments during the growing season. The Bt protein content of Bt cotton leaves in the laboratory were negatively correlated with the salinity level. The CBW populations were highest on the Bt cotton grown in medium-salinity soil instead of the high-salinity soil in field conditions. A possible mechanism may be that the relatively high-salinity soil changed the plant nutritional quality or other plant defensive traits. The results from this study may help to identify more appropriate practices to control CBW in Bt cotton fields with different soil salinity levels.

  16. Perspective of using the sterile insect technique for Tobacco Budworms Heliothis virescens (Lepidoptera: Noctuidae) and Cotton Bollworm Helicoverpa armigera (Lepidoptera: Noctuidae) in cotton crop as an alternative method of control

    International Nuclear Information System (INIS)

    Haddad, Gianni Queiroz

    2017-01-01

    Since the 1950s, scientists have used ionizing radiation to sterilize insects, which are released in nature to mate, but without any progeny. Known as the sterile insect technique (TIE), this method of insect control has traditionally used ionizing radiation to sterilize insects, a technique that does not generate residues, and can act in synergy with the other techniques within integrated pest management. For several years, Brazil has been fighting against the increase of pests, introducing new tactics and techniques within the IPM programs, to overcome the resistance of chemical products, such as: reducing the residues of agrochemicals; For some important crops of our country, we have a wide spectrum of pests occurring from the beginning to the end of the harvest, one of them is the cotton crop and among the key pests of this crop, we have some extremely important caterpillars, among them Heliothis virescens and Helicoverpa armigera These species are morphologically similar, the second being identified a few years ago in Brazil. There are still no studies in Brazil using TIE as an additional tool for Lepidoptera, therefore the purpose of this study was to evaluate the effect of doses of gamma radiation in the different phases of the evolutionary cycle of Heliothis virescens and Helicoverpa armigera, as well as to evaluate the sterility in generation P And the ability of insects to irradiate with non-irradiated insects. The pupal phase presented the best result because 75 Gy achieved sterility in Heliothis virecens and 100 Gy sterilized Helicoverpa armigera, therefore it contemplated the phase and dose chosen to evaluate the competition between the irradiated insects and the normal insects of both species. Both Heliothis virecens and Helicoverpa armigera presented a satisfactory result, as the irradiated insects managed to significantly reduce the viability of the eggs in a ratio of 9: 1: 1. (author)

  17. Perspective of using the sterile insect technique for Tobacco Budworms Heliothis virescens (Lepidoptera: Noctuidae) and Cotton Bollworm Helicoverpa armigera (Lepidoptera: Noctuidae) in cotton crop as an alternative method of control; Perspectiva de utilizacao da Tecnica do Inseto Esteril para lagarta da maca Heliothis virescens (Lepidoptera: Noctuidae) e lagarta do velho mundo Helicoverpa armigera (Lepidoptera: Noctuidae) na cultura do algodoeiro como um metodo alternativo de controle

    Energy Technology Data Exchange (ETDEWEB)

    Haddad, Gianni Queiroz

    2017-07-01

    Since the 1950s, scientists have used ionizing radiation to sterilize insects, which are released in nature to mate, but without any progeny. Known as the sterile insect technique (TIE), this method of insect control has traditionally used ionizing radiation to sterilize insects, a technique that does not generate residues, and can act in synergy with the other techniques within integrated pest management. For several years, Brazil has been fighting against the increase of pests, introducing new tactics and techniques within the IPM programs, to overcome the resistance of chemical products, such as: reducing the residues of agrochemicals; For some important crops of our country, we have a wide spectrum of pests occurring from the beginning to the end of the harvest, one of them is the cotton crop and among the key pests of this crop, we have some extremely important caterpillars, among them Heliothis virescens and Helicoverpa armigera These species are morphologically similar, the second being identified a few years ago in Brazil. There are still no studies in Brazil using TIE as an additional tool for Lepidoptera, therefore the purpose of this study was to evaluate the effect of doses of gamma radiation in the different phases of the evolutionary cycle of Heliothis virescens and Helicoverpa armigera, as well as to evaluate the sterility in generation P And the ability of insects to irradiate with non-irradiated insects. The pupal phase presented the best result because 75 Gy achieved sterility in Heliothis virecens and 100 Gy sterilized Helicoverpa armigera, therefore it contemplated the phase and dose chosen to evaluate the competition between the irradiated insects and the normal insects of both species. Both Heliothis virecens and Helicoverpa armigera presented a satisfactory result, as the irradiated insects managed to significantly reduce the viability of the eggs in a ratio of 9: 1: 1. (author)

  18. The effects of radiation on the biology and reproduction of Helicoverpa armigera (Lepidoptera: Noctuidae)

    International Nuclear Information System (INIS)

    Ramos Ocampo, V.; Leon, J.B. de

    2002-01-01

    The effect of irradiating male Helicoverpa armigera with a substerilizing dose (100 Gy) of gamma radiation on the growth, development and reproduction of subsequent generations was studied in the laboratory. This dose of gamma radiation had no significant detrimental effects on larval and pupal weights or on the duration of the pupal period in the F 1 progeny. However, it lengthened the duration of the larval period by two days. In the F 2 generation, the progeny of the Tf 1 FxTf 1 M cross had significantly lighter pupae. The effects of this substerilizing dose of radiation and of the resulting inherited sterility on the reproduction of Helicoverpa armigera were similar to those described for other species of Lepidoptera. No detrimental effects on P 1 and F 1 female fecundity were recorded. Crosses involving Tf 1 females laid only about one half the number of eggs laid by the controls, however the range in the number of eggs laid by these females fell within the normal range for Helicoverpa armigera. Fertility of crosses involving P 1 males was greatly affected; fertility in these females was only 61% of that exhibited by the controls. This deleterious effect was inherited in the F 1 and F 2 generations and was maximally expressed when F 1 progeny of the NFxTM cross were inbred. Egg hatch was almost completely inhibited in sibling crosses while outcrosses of the F 1 progeny showed a 64-70% reduction in egg hatch when compared to controls. (author)

  19. Trichogramma chilotraeae PARASITOID TELUR Helicoverpa armigera (Hubner PADA POPULASI INANG RENDAH

    Directory of Open Access Journals (Sweden)

    - Sujak

    2011-03-01

    Full Text Available Helicoverpa armigera Hubner is an insect pest of corn and cotton crops. Eggs are laid by  H. armigera imago on corn silk and cotton crops often have high mortality, mainly caused by egg parasitoid. H. armigera egg on various agroecosystem reported can  be parasited by at least 12 species of  Trichogrammatidae. The purpose of this study was to determine the diversity of  Trichogrammatidae family as  parasitoid eggs of  H. armigera on  low population. H. armigera egg sample taken from Asembagus, Lamongan and Blora at 1 m2 field  both monoculture and intercropping. Observation of parasitoids and predators  done at the Laboratory of Biological Control Balittas Malang. Parasitoid that appears preserved in the Hoyer medium for identification purposes. low population of  H. armigera Egg in Asembagus is  4 eggs/m2 in both monoculture maize and intercropping with 86-100 days after transplanting (DAT cotton and  4.5 egg/m2 on cotton monoculture and intercropping with 75  DAT soybean, while 2 eggs/m2 in the Lamongan and Blora corn agroecosystem. The dominant egg parasitoid in Asembagus is T. chilotraea, as well as in Lamongan and Blora.

  20. The potential distribution of invading Helicoverpa armigera in North America: is it just a matter of time?

    Directory of Open Access Journals (Sweden)

    Darren J Kriticos

    Full Text Available Helicoverpa armigera has recently invaded South and Central America, and appears to be spreading rapidly. We update a previously developed potential distribution model to highlight the global invasion threat, with emphasis on the risks to the United States. The continued range expansion of H. armigera in Central America is likely to change the invasion threat it poses to North America qualitatively, making natural dispersal from either the Caribbean islands or Mexico feasible. To characterise the threat posed by H. armigera, we collated the value of the major host crops in the United States growing within its modelled potential range, including that area where it could expand its range during favourable seasons. We found that the annual value of crops that would be exposed to H. armigera totalled approximately US$78 billion p.a., with US$843 million p.a. worth growing in climates that are optimal for the pest. Elsewhere, H. armigera has developed broad-spectrum pesticide resistance; meaning that if it invades the United States, protecting these crops from significant production impacts could be challenging. It may be cost-effective to undertake pre-emptive biosecurity activities such as slowing the spread of H. armigera throughout the Americas, improving the system for detecting H. armigera, and methods for rapid identification, especially distinguishing between H. armigera, H. zea and potential H. armigera x H. zea hybrids. Developing biological control programs, especially using inundative techniques with entomopathogens and parasitoids could slow the spread of H. armigera, and reduce selective pressure for pesticide resistance. The rapid spread of H. armigera through South America into Central America suggests that its spread into North America is a matter of time. The likely natural dispersal routes preclude aggressive incursion responses, emphasizing the value of preparatory communication with agricultural producers in areas suitable for

  1. Hybridization between Helicoverpa armigera and Helicoverpa assulta (Lepidoptera: Noctuidae): development and morphological characterization of F1 hybrids

    Czech Academy of Sciences Publication Activity Database

    Zhao, X. C.; Dong, J. F.; Tang, Q. B.; Yan, Y. H.; Gelbič, Ivan; Van Loon, J. J. A.; Wang, C. Z.

    2005-01-01

    Roč. 95, č. 5 (2005), s. 409-416 ISSN 0007-4853 Grant - others:Chinese Academy of Sciences(CN) KSCX2-SW-105; Major State Basic Research Project of China(CN) 2000016208; National Natural Science Foundation of China(CN) 30330100 Institutional research plan: CEZ:AV0Z50070508 Keywords : Helicoverpa armigera * Helicoverpa assulta * Noctuidae Subject RIV: ED - Physiology Impact factor: 1.333, year: 2005

  2. Investigation on mating habit and sexual competition ability of Helicoverpa armigera sterilized by irradiation

    International Nuclear Information System (INIS)

    Xia Darong; Yang Rongxin; Gu Weiping; Zhang Yanjun

    1999-01-01

    Mating habit and sexual competition ability of Helicoverpa armigera irradiated with 300 Gy of γ-rays were observed. The results showed that when reared in laboratory, most adults mated at 4-7 o'clock, a small proportion of adults mated at 2-3 o'clock or at 8-9 o'clock in the morning, meanwhile wild population mated two and a half hours earlier than laboratory populations did. No difference in mating habit and sexual competition ability was found between the irradiation-sterilized and normal adults except that the effective mating rate of the former was 61.6%, one third less than that of the latter ones. Most irradiation-sterilized adults mated one time in their whole lives, only a few could mate 2-3 times and even 5 times, indicating that the multi-mating characteristic of Helicoverpa armigera was not changed by irradiation. It can be concluded that irradiated sterile insect technique is feasible for integrated controlling the cotton bollworm

  3. Helicoverpa armigera (Lepidoptera: Noctuidae) larvae that survive sublethal doses of nucleopolyhedrovirus exhibit high metabolic rates.

    Science.gov (United States)

    Bouwer, Gustav; Nardini, Luisa; Duncan, Frances D

    2009-04-01

    To determine the effect of sublethal doses of Helicoverpa armigera single nucleocapsid nucleopolyhedrovirus (HearSNPV) on the metabolic rate of H. armigera, the respiration rates of third instar H. armigera larvae inoculated with sublethal doses of HearSNPV were evaluated. Respiration rates, measured as the rate of CO(2) production (VCO(2)), were recorded daily using closed-system respirometry. By 4 days post-inoculation (dpi), the metabolic rates of LD(25) or LD(75) survivors were significantly higher than that of uninoculated controls. When dose data were pooled, the VCO(2) values of larvae that survived inoculation (0.0288mlh(-1)), the uninoculated controls (0.0250mlh(-1)), and the larvae that did not survive inoculation (0.0199mlh(-1)) differed significantly from one another. At 4dpi, the VCO(2) of the uninoculated controls were significantly lower than the VCO(2) of inoculation survivors, but significantly higher than the VCO(2) of inoculation non-survivors. Inoculation survivors may have had high metabolic rates due to a combination of viral replication, organ damage, and an energy-intensive induced cellular immune response. The high 4dpi metabolic rate of inoculation survivors may reflect an effective immune response and may be seen as the metabolic signature of larvae that are in the process of surviving inoculation with HearSNPV.

  4. Acute, sublethal, and combination effects of azadirachtin and Bacillus thuringiensis on the cotton bollworm, Helicoverpa armigera.

    Science.gov (United States)

    Abedi, Zahra; Saber, Moosa; Vojoudi, Samad; Mahdavi, Vahid; Parsaeyan, Ehsan

    2014-02-26

    The cotton bollworm, Helicoverpa armigera Hübner (Lepidoptera: Noctuidae) is a polyphagous and cosmopolitan insect pest that causes damage to various plants. In this study, the lethal and sublethal effects of azadirachtin and Bacillus thuringiensis Berliner sub sp . kurstaki (Bacillales: Bacillaceae) were evaluated on third instar H. armigera under laboratory conditions. The LC50 values of azadirachtin and Bt were 12.95 and 96.8 µg a.i./mL, respectively. A total mortality of 56.7% was caused on third instar larvae when LC20 values of the insecticides were applied in combination with each other. The LT50 values of azadirachtin and Bt were 4.8 and 3.6 days, respectively. The results of the sublethal study showed that the application of LC30 value of azadirachtin and Bt reduced the larval and pupal weight and increased larval and pupal duration of H. armigera. The longevity and fecundity of female adults were affected significantly by the insecticides. Female fecundity was reduced by the treatments, respectively. The lowest adult emergence ratio and pupation ratio were observed in the azadirachtin treatment. The results indicated that both insecticides have high potential for controlling of the pest. This is an open access paper. We use the Creative Commons Attribution 3.0 license that permits unrestricted use, provided that the paper is properly attributed.

  5. Interaction of plant cell signaling molecules, salicylic acid and jasmonic acid, with the mitochondria of Helicoverpa armigera.

    Science.gov (United States)

    Akbar, S M D; Sharma, H C; Jayalakshmi, S K; Sreeramulu, K

    2012-02-01

    The cotton bollworm, Helicoverpa armigera is a polyphagous pest in Asia, Africa, and the Mediterranean Europe. Salicylic acid (SA) and jasmonic acid (JA) are the cell signaling molecules produced in response to insect attack in plants. The effect of these signaling molecules was investigated on the oxidative phosphorylation and oxidative stress of H. armigera. SA significantly inhibited the state III and state IV respiration, respiratory control index (RCI), respiratory complexes I and II, induced mitochondrial swelling, and cytochrome c release in vitro. Under in vivo conditions, SA induced state IV respiration as well as oxidative stress in time- and dose-dependent manner, and also inhibited the larval growth. In contrast, JA did not affect the mitochondrial respiration and oxidative stress. SA affected the growth and development of H. armigera, in addition to its function as signaling molecules involved in both local defense reactions at feeding sites and the induction of systemic acquired resistance in plants.

  6. Activity of Selected Formulated Biorational and Synthetic Insecticides Against Larvae of Helicoverpa armigera (Lepidoptera: Noctuidae).

    Science.gov (United States)

    Vivan, L M; Torres, J B; Fernandes, P L S

    2017-02-01

    This work studied 17 insecticides belonging to nucleopolyhedrovirus (NPV), Bacillus thuringiensis (Bt kurstaki and Bt aizawai), benzoylureas (insect growth regulators [IGRs]), carbamates, organophosphates, spinosyns, and diamides against larvae of Helicoverpa armigera (Hübner), invasive species in the South American continent. Larvae of different instars were fed for 7 d with untreated or insecticide-treated diets. Mortality was recorded daily for 7 d, and surviving larvae were individually weighed on the seventh day. The NPV and Bt insecticides caused 100% mortality of first-instar larvae and first-instar and second-instar larvae, respectively. However, both NPV and Bt-based products caused low mortality of third-instar larvae and did not kill older larvae. The IGR lufenuron was highly effective against all three ages of larvae tested, whereas teflubenzuron and triflumuron produced maximum 60% mortality of second-instar larvae and lower than 50% to older larvae. Thiodicarb, chlorantraniliprole, indoxacarb, chlorpyrifos, and chlorfenapyr, irrespective of tested age, caused 100% mortality of larvae, with the last two insecticides reaching 100% mortality within 2 d of feeding on the treated diet. Flubendiamide caused lower mortality but significantly affected the weight of surviving larvae, whereas neither spinosad nor methomyl produced significant mortality or affected the weight of larvae. Based on the results, the age of H. armigera larvae plays an important role in the recommendation of NPV and Bt insecticides. Furthermore, there are potential options between biological and synthetic insecticides tested against H. armigera, and recording larval size during monitoring, in addition to the infestation level, should be considered when recommending biological-based insecticides to control this pest. © The Authors 2016. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  7. The entomopathogenic fungus Nomuraea rileyi impairs cellular immunity of its host Helicoverpa armigera.

    Science.gov (United States)

    Zhong, Ke; Liu, Zhan-Chi; Wang, Jia-Lin; Liu, Xu-Sheng

    2017-09-01

    In this study, we investigated the effect of the entomopathogenic fungus Nomuraea rileyi on Helicoverpa armigera cellular immune responses. Nomuraea rileyi infection had no effect on total hemocyte count (THC), but impaired hemocyte-mediated phagocytosis, nodulation, and encapsulation responses. Nomuraea rileyi infection led to a significant reduction in hemocyte spreading. An in vitro assay revealed that plasma from N. rileyi infected H. armigera larvae suppressed the spreading ability of hemocytes from naïve larvae. We infer that N. rileyi suppresses the cellular immune response of its host, possibly by secreting exogenous, cytotoxic compounds into the host's hemolymph. © 2017 Wiley Periodicals, Inc.

  8. The efficacy of Beauveria bassiana, jasmonic acid and chlorantraniliprole on larval populations of Helicoverpa armigera in chickpea crop ecosystems.

    Science.gov (United States)

    Younas, Aneela; Wakil, Waqas; Khan, Zaeema; Shaaban, Muhammad; Prager, Sean Michael

    2017-02-01

    A robust integrated pest management (IPM) programme is needed to reduce the use of insecticides in controlling Helicoverpa armigera. Therefore, a 2 year field study was conducted to evaluate the use of alternative control measures (biochemical use) for H. armigera relative to exclusively using chemical insecticides. The entomopathogenic fungus Beauveria bassiana, jasmonic acid and the insecticide chlorantraniliprole were each applied twice during the chickpea growing season. All three applied materials (either alone or combined) significantly (P ≤ 0.05) reduced the larval population of H. armigera and pod infestation. Effects increased with time, and the maximum difference was observed 7 days after the second application in each year. The lowest numbers of larvae per plant and pod infestation were in the B. bassiana 3.21 × 10 6 + chlorantraniliprole treatment in both 2009/2010 and 2010/2011 year. The reduction in the larval population and pod infestation increased chickpea yield and the highest yield in both seasons, and the maximum yield was obtained in the B. bassiana 3.21 × 10 6 + chlorantraniliprole treatment. The populations of natural enemies were highest in the jasmonic acid treatment. The results suggest that B. bassiana, jasmonic acid and chlorantraniliprole may be useful components for the H. armigera IPM strategy. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

  9. Functional response of Chrysoperla carnea (Neuroptera: Chrysopidae) to Helicoverpa armigera (Lepidoptera: Noctuidae): effect of prey and predator stages

    DEFF Research Database (Denmark)

    Hassanpour, Mehdi; Mohaghegh, Jafar; Iranipour, Shahzad

    2011-01-01

    Understanding predator–prey interactions has a pivotal role in biological control programs. This study evaluated the functional response of three larval instars of the green lacewing, Chrysoperla carnea (Stephens), preying upon eggs and first instar larvae of the cotton bollworm, Helicoverpa...... armigera Hübner. The first and second instar larvae of C. carnea exhibited type II functional responses against both prey stages. However, the third instar larvae of C. carnea showed a type II functional response to the first instar larvae of H. armigera, but a type III functional response to the eggs....... For the first instar larvae of C. carnea, the attack rate on H. armigera eggs was significantly higher than that on the larvae, whereas the attack rate of the second instar C. carnea on H. armigera larvae was significantly higher than that on the eggs. For the third instar larvae of C. carnea, the attack rate...

  10. Performance of Helicoverpa armigera (Hübner (Lepidoptera: Noctuidae larvae in different food sources

    Directory of Open Access Journals (Sweden)

    Crislaine Sartori Suzana

    2015-12-01

    Full Text Available Recently observed in Brazil, Helicoverpa armigera became a relevant pest due to its rapid spread and the economic importance of crops in which it has established, such as soybean and maize. Understanding its establishment process in different regions and production systems, as well as the population dynamics of a polyphagous pest, as the basis for its management, depends on the knowledge of the effect of plant species as food sources on the pest biology. A laboratory experiment was conducted, supplying the caterpillars with reproductive organs of soybean, maize, canola, black oat, oat, turnip and ryegrass. It was concluded that the different food sources affect the larval development of H. armigera. Maize and wheat ears and canola siliques are the best food sources for the development of H. armigera. Ryegrass ears, on the other hand, are the worst ones. Black oat and oat panicles and turnip siliques are less suitable than soybean pods as food sources for the caterpillars.

  11. X-ray radiation and development inhibition of Helicoverpa armigera Hübner (Lepidoptera: Noctuidae)

    International Nuclear Information System (INIS)

    Kim, Junheon; Jung, Soon-Oh; Jang, Sin Ae; Kim, Jeongmin; Park, Chung Gyoo

    2015-01-01

    Effect of X-ray radiation on the development inhibition was evaluated for all stages of the life cycle of Helicoverpa armigera to determine a radiation dose for potential quarantine treatment against the insect. ED 99 values for inhibition of hatching, pupation, and adult emergence from irradiated eggs were 413, 210, and 154 Gy, respectively. ED 99 values for inhibition of pupation and adult emergence from irradiated larvae were 221 and 167 Gy, respectively. Pupa was the most tolerant to X-ray radiation. ED 99 value for inhibition of adult emergence from irradiated pupae was as high as 2310 Gy, whereas that for inhibition of F 1 egg hatching was only 66 Gy. ED 99 value for inhibition of hatching of F 1 eggs which were laid by irradiated adults was estimated to 194 Gy. X-ray irradiation against H. armigera is recommended as an alternative method to methyl bromide fumigation for phytosanitary treatments during quarantine. X-ray radiation dose of 200 Gy is proposed as a potential quarantine treatment dose for H. armigera eggs and larvae. - Highlights: • X-ray irradiation induced abnormal development of Helicoverpa armigera. • ED 99 value for inhibition of pupation and adult emergence of irradiated egg was estimated at 210 and 154 Gy, respectively. • ED 99 value for inhibition of pupation and adult emergence of irradiated larva was estimated at 221 and 167 Gy, respectively

  12. The expression of proteins involved in digestion and detoxification are regulated in Helicoverpa armigera to cope up with chlorpyrifos insecticide.

    Science.gov (United States)

    Dawkar, Vishal V; Chikate, Yojana R; More, Tushar H; Gupta, Vidya S; Giri, Ashok P

    2016-02-01

    Helicoverpa armigera is a key pest in many vital crops, which is mainly controlled by chemical strategies. To manage this pest is becoming challenging due to its ability and evolution of resistance against insecticides. Further, its subsequent spread on nonhost plant is remarkable in recent times. Hence, decoding resistance mechanism against phytochemicals and synthetic insecticides is a major challenge. The present work describes that the digestion, defense and immunity related enzymes are associated with chlorpyrifos resistance in H. armigera. Proteomic analysis of H. armigera gut tissue upon feeding on chlorpyrifos containing diet (CH) and artificial diet (AD) using nano-liquid chromatography-mass spectrometry identified upregulated 23-proteins in CH fed larvae. Database searches combined with gene ontology analysis revealed that the identified gut proteins engrossed in digestion, proteins crucial for immunity, adaptive responses to stress, and detoxification. Biochemical and quantitative real-time polymerase chain reaction analysis of candidate proteins indicated that insects were struggling to get nutrients and energy in presence of CH, while at the same time endeavoring to metabolize chlorpyrifos. Moreover, we proposed a potential processing pathway of chlorpyrifos in H. armigera gut by examining the metabolites using gas chromatography-mass spectrometry. H. armigera exhibit a range of intriguing behavioral, morphological adaptations and resistance to insecticides by regulating expression of proteins involved in digestion and detoxification mechanisms to cope up with chlorpyrifos. In these contexts, as gut is a rich repository of biological information; profound analysis of gut tissues can give clues of detoxification and resistance mechanism in insects. © 2014 Institute of Zoology, Chinese Academy of Sciences.

  13. Lethal and sublethal effects of cantharidin on the life history traits and population parameters of Helicoverpa armigera (Hübner) (Lepidoptera: Noctuidae).

    Science.gov (United States)

    Khan, Rashid A; Rashid, Maryam; Wang, Dun; Zhang, Ya-Lin

    2014-01-01

    The cotton bollworm, Helicoverpa armigera (Hübner), is a serious and cosmopolitan pest of many economic crops. Its control has not been adequate owing to its resistance to many groups of insecticides. Toxicity of cantharidin on armyworm and diamondback moth has already been reported. However, its toxicity on H. armigera has not been investigated previously. In this study, lethal and sublethal effects of cantharidin on H. armigera under laboratory conditions are reported. Results showed gross abnormalities in the population parameters of H. armigera, ranging from larvae to adults. Reduction in larval weight and wing malformation were observed in the cantharidin-treated population cohort, and higher mortality at the larval, pupal and adult stages was observed in cantharidin-treated H. armigera compared with the control. Moreover, almost 5 times less fecundity was recorded in the treated population cohort. Fertility was also severely affected, and reduction in all population parameters was observed. Cantharidin caused larval mortality and other serious abnormalities in H. armigera population parameters, and therefore may have positive implications for pest management decision-making process. More interestingly, the experiment revealed that cantharidin in sublethal dose mimicked insect growth regulator insecticides. Furthermore, cantharidin could be used as a precursor compound for the synthesis of new analogues and compounds to replace ineffective older compounds. © 2013 Society of Chemical Industry.

  14. Effects of ultraviolet light irradiation on several isozymes in Helicoverpa armigera adults

    International Nuclear Information System (INIS)

    Meng Jianyu; Zhang Changyu; Lei Chaoliang

    2012-01-01

    The effects of ultraviolet (UV)light stress on esterase, peroxidases (POX ), and catalase (CAT) isozymes in Helicoverpa armigera (Hiiber) adults were studied by isozyme eleetrophoresis. When exposed to UV light irradiation, zymogram of esterase isozyme changed mainly in number and activity of isozyme. After 30 min and 60 min exposure, the intensity of isozyme bands E4, E9 and El0 were enhanced, E2 and E8 were weakened. The bands E1, E5, E7 and Ell disappeared after UV light irradiation, while E3 and E6 newly emerged. At the longest exposure time (90 min), the intensity of isozyme bands E4 and E9 was enhanced, while the intensity of E2 and E8 was weakened. The bands E1, E5 and E7 disappeared after UV light irradiation, whereas E3 and E6 newly emerged. The intensity of POX band P5 was enhanced in adults following the exposure to UV light for 30, 60, 90 minutes. The intensity of CAT band C1 was enhanced in adults following the exposure to UV light for 30, 60, 90 minutes, but that of band C2 was weakened after 30 min and 90 min exposure in comparison with the control

  15. SUSCETIBILIDADE DE Helicoverpa armigera Hübner A FORMULADOS À BASE DE Bacillus thuringiensis BERLINER

    Directory of Open Access Journals (Sweden)

    Victor Luiz de Souza Lima

    2017-01-01

    Full Text Available O inseto Helicoverpa armigera recentemente registrado no Brasil é uma das maiores pragas da agricultura mundial. Pode atacar mais de 200 espécies de plantas e possui populações resistentes a diversos inseticidas. A utilização de microrganismos com potencial patogênico contra insetos é uma alternativa aos inseticidas. Essa pesquisa foi realizada com o objetivo de determinar a suscetibilidade de lagartas de H. armigera à produtos formulados à base de Bacillus thuringiensis (Bt Para os experimentos, foram utilizados os produtos comerciais Dipel® e Agree®, os quais tiveram sua concentração ajustada para 108 conídios viáveis ml-1. Essa concentração foi aplicada sobre dieta artificial, a qual foi colocada em uma placa de Petri que continha 10 lagartas de primeiro instar. Foram realizadas cinco repetições para cada produto. As avaliações foram feitas a cada 24h durante sete dias. Os produtos comerciais Dipel® e Agree® causaram, respectivamente, 100% e 94% de mortalidade das lagartas de H. armigera. Esse resultado mostra o potencial de produtos à base de Bt sobre H. armigera.

  16. Effects of gamma irradiation on the sperm transmission and oviposition response in Helicoverpa armigera (L. Noctuidae)

    International Nuclear Information System (INIS)

    Liu Xiaohui; Wang Huasong; Song Jiaxiang

    1999-12-01

    The transmission of sperm by unirradiated and irradiated cotton bollworm, Helicoverpa armigera, was studied by live dissection of the female immediately after the initiation of mating. In cotton bollworm the sperm transfer was a rather complex process. In fact, the unirradiated male failed to transfer sperm in about 19% of their matings. After being irradiated with 250 Gy and 400 Gy, the aberrations of sperm transmission were about 21% and 50% respectively. The failure of spermatophore 'cap' location was an important reason of sperm transmission aberrations. When female mated to high-dose-irradiated males, its oviposition response appeared abnormal

  17. Behaviour of wild-type and genetically modified baculoviruses in the Helicoverpa armigera - cotton system: a simulation approach

    NARCIS (Netherlands)

    Sun, X.

    2005-01-01

    Keywords:   Helicoverpa armigera , baculovirus, genetic modification, cotton,transmission

  18. Experience-based behavioral and chemosensory changes in the generalist insect herbivore Helicoverpa armigera exposed to two deterrent plant chemicals

    NARCIS (Netherlands)

    Zhou, D.; Loon, van J.J.A.; Wang, C.Z.

    2010-01-01

    Behavioral and electrophysiological responses of larvae of the polyphagous moth species Helicoverpa armigera to two plant-derived allelochemicals were studied, both in larvae that had been reared on a diet devoid of these compounds and in larvae previously exposed to these compounds. In dual-choice

  19. Characterization of the metabolic transformation of thiamethoxam to clothianidin in Helicoverpa armigera larvae by SPE combined UPLC-MS/MS and its relationship with the toxicity of thiamethoxam to Helicoverpa armigera larvae.

    Science.gov (United States)

    Fan, Yinjun; Shi, Xueyan

    2017-09-01

    In order to characterize the metabolic transformation of thiamethoxam (TMX) to clothianidin (CLO) in Helicoverpa armigera larvae and clarify its relationship with the insecticidal toxicity of TMX, method for determination of TMX and its metabolite clothianidin (CLO) residues in H. armigera larvae by solid phase extraction (SPE) combined UPLC-MS/MS was established. Following acetonitrile extraction and purification by SPE on florisil cartridge and C 18 cartridge sequently, and cleanup by PSA adsorption, TMX and CLO residues in H. armigera larvae were successfully determined by UPLC-MS/MS. By using the established method, the concentration-time curves of TMX and its metabolite CLO in H. armigera larvae in vivo and metabolism of TMX by microsome of H. armigera larvae midguts in vitro were studied. TMX was quickly eliminated from H. armigera larvae with the elimination half-life as 4.2h. Meanwhile, only a small amount of CLO was formed from TMX metabolism, with the maximum CLO level in H. armigera larvae only accounts for the metabolic transformation of 7.99% of TMX, at 10h after intravenous TMX administration. Our results suggested that the low insecticidal efficacy of TMX against H. armigera larvae was related with the rapidly elimination of TMX from H. armigera larvae, meanwhile, CLO as TMX metabolite at a very low level in vivo didn't contribute to TMX toxicity to H. armigera larvae. In H. armigera larvae, TMX didn't act as proinsecticide for CLO in insecticidal efficacy of TMX. Copyright © 2017 Elsevier B.V. All rights reserved.

  20. Tarsal taste neuron activity and proboscis extension reflex in response to sugars and amino acids in Helicoverpa armigera (Hübner)

    NARCIS (Netherlands)

    Zhang, Y.F.; Loon, van J.J.A.; Wang, C.Z.

    2010-01-01

    In adult female Helicoverpa armigera (Hübner), the fifth tarsomere of the prothoracic legs bears 14 gustatory trichoid chemosensilla. These chemosensilla were characterized through electrophysiological experiments by stimulating with sucrose, glucose, fructose, maltose, myo-inositol and 20 common

  1. Characterization of three novel SINE families with unusual features in Helicoverpa armigera.

    Directory of Open Access Journals (Sweden)

    Jianjun Wang

    Full Text Available Although more than 120 families of short interspersed nuclear elements (SINEs have been isolated from the eukaryotic genomes, little is known about SINEs in insects. Here, we characterize three novel SINEs from the cotton bollworm, Helicoverpa armigera. Two of them, HaSE1 and HaSE2, share similar 5' -structure including a tRNA-related region immediately followed by conserved central domain. The 3' -tail of HaSE1 is significantly similar to that of one LINE retrotransposon element, HaRTE1.1, in H. armigera genome. The 3' -region of HaSE2 showed high identity with one mariner-like element in H. armigera. The third family, termed HaSE3, is a 5S rRNA-derived SINE and shares both body part and 3'-tail with HaSE1, thus may represent the first example of a chimera generated by recombination between 5S rRNA and tRNA-derived SINE in insect species. Further database searches revealed the presence of these SINEs in several other related insect species, but not in the silkworm, Bombyx mori, indicating a relatively narrow distribution of these SINEs in Lepidopterans. Apart from above, we found a copy of HaSE2 in the GenBank EST entry for the cotton aphid, Aphis gossypii, suggesting the occurrence of horizontal transfer.

  2. Characterization of Three Novel SINE Families with Unusual Features in Helicoverpa armigera

    Science.gov (United States)

    Wang, Jianjun; Wang, Aina; Han, Zhaojun; Zhang, Zan; Li, Fei; Li, Xianchun

    2012-01-01

    Although more than 120 families of short interspersed nuclear elements (SINEs) have been isolated from the eukaryotic genomes, little is known about SINEs in insects. Here, we characterize three novel SINEs from the cotton bollworm, Helicoverpa armigera. Two of them, HaSE1 and HaSE2, share similar 5′ -structure including a tRNA-related region immediately followed by conserved central domain. The 3′ -tail of HaSE1 is significantly similar to that of one LINE retrotransposon element, HaRTE1.1, in H. armigera genome. The 3′ -region of HaSE2 showed high identity with one mariner-like element in H. armigera. The third family, termed HaSE3, is a 5S rRNA-derived SINE and shares both body part and 3′-tail with HaSE1, thus may represent the first example of a chimera generated by recombination between 5S rRNA and tRNA-derived SINE in insect species. Further database searches revealed the presence of these SINEs in several other related insect species, but not in the silkworm, Bombyx mori, indicating a relatively narrow distribution of these SINEs in Lepidopterans. Apart from above, we found a copy of HaSE2 in the GenBank EST entry for the cotton aphid, Aphis gossypii, suggesting the occurrence of horizontal transfer. PMID:22319625

  3. Bacterial Expression and Kinetic Analysis of Carboxylesterase 001D from Helicoverpa armigera

    Directory of Open Access Journals (Sweden)

    Yongqiang Li

    2016-04-01

    Full Text Available Carboxylesterasesare an important class of detoxification enzymes involved in insecticide resistance in insects. A subgroup of Helicoverpa armigera esterases, known as Clade 001, was implicated in organophosphate and pyrethroid insecticide resistance due to their overabundance in resistant strains. In this work, a novel carboxylesterasegene 001D of H. armigera from China was cloned, which has an open reading frame of 1665 nucleotides encoding 554 amino acid residues. We used a series of fusion proteins to successfully express carboxylesterase 001D in Escherichia coli. Three different fusion proteins were generated and tested. The enzyme kinetic assay towards 1-naphthyl acetate showed all three purified fusion proteins are active with a Kcat between 0.35 and 2.29 s−1, and a Km between 7.61 and 19.72 μM. The HPLC assay showed all three purified fusion proteins had low but measurable hydrolase activity towards β-cypermethrin and fenvalerate insecticides (specific activities ranging from 0.13 to 0.67 μM·min−1·(μM−1·protein. The enzyme was stable up to 40 °C and at pH 6.0–11.0. The results imply that carboxylesterase 001D is involved in detoxification, and this moderate insecticide hydrolysis may suggest that overexpression of the gene to enhance insecticide sequestration is necessary to allow carboxylesterases to confer resistance to these insecticides in H. armigera.

  4. ATIVIDADE DE DETERRÊNCIA ALIMENTAR DO ÓLEO ESSENCIAL DE LARANJA AMARGA SOBRE Helicoverpa armigera HÜBNER

    Directory of Open Access Journals (Sweden)

    Victor Luiz de Souza Lima

    2017-01-01

    Full Text Available Diversas plantas possuem compostos secundários com propriedades inseticidas e o óleo essencial de laranja amarga mostra-se com grande potencial para o controle de pragas. Recentemente, foi registrada no Brasil a espécie Helicoverpa armigera, uma das maiores pragas da agricultura mundial. Tendo em vista a falta de métodos alternativos aos inseticidas para o controle dessa praga, o objetivo desse trabalho foi avaliar os efeitos do óleo essencial de laranja amarga sobre H. armigera. Foi realizado um teste de escolha para avaliar a atividade deterrente. Folhas de tomate foram imersas em soluções contendo óleo de laranja amarga em três concentrações (1, 10 e 100 mg L-1. As folhas tratadas com óleo e folhas não tratadas foram oferecidas à lagartas de segunda instar e após 24h foi calculado o índice de deterrência alimentar (IDA. A concentração de 1 mg L-1 apresentou 71% de deterrência alimentar. Porém as concentrações de 10 e 100 mg L-1 causaram fitotoxidez às folhas de tomate, inviabilizando o consumo pelas lagartas e a estimativa do IDA. Novos testes devem ser realizados com concentrações menores para evitar a fitotoxidez.

  5. Transgenic Cotton Plants Expressing the HaHR3 Gene Conferred Enhanced Resistance to Helicoverpa armigera and Improved Cotton Yield.

    Science.gov (United States)

    Han, Qiang; Wang, Zhenzhen; He, Yunxin; Xiong, Yehui; Lv, Shun; Li, Shupeng; Zhang, Zhigang; Qiu, Dewen; Zeng, Hongmei

    2017-08-30

    RNA interference (RNAi) has been developed as an efficient technology. RNAi insect-resistant transgenic plants expressing double-stranded RNA (dsRNA) that is ingested into insects to silence target genes can affect the viability of these pests or even lead to their death. HaHR3 , a molt-regulating transcription factor gene, was previously selected as a target expressed in bacteria and tobacco plants to control Helicoverpa armigera by RNAi technology. In this work, we selected the dsRNA- HaHR3 fragment to silence HaHR3 in cotton bollworm for plant mediated-RNAi research. A total of 19 transgenic cotton lines expressing HaHR3 were successfully cultivated, and seven generated lines were used to perform feeding bioassays. Transgenic cotton plants expressing ds HaHR3 were shown to induce high larval mortality and deformities of pupation and adult eclosion when used to feed the newly hatched larvae, and 3rd and 5th instar larvae of H. armigera . Moreover, HaHR3 transgenic cotton also demonstrated an improved cotton yield when compared with controls.

  6. Baseline Susceptibility of Helicoverpa armigera (Lepidoptera: Noctuidae) to Indoxacarb, Emamectin Benzoate, and Chlorantraniliprole in Australia.

    Science.gov (United States)

    Bird, Lisa J

    2015-02-01

    Baseline susceptibility of Helicoverpa armigera (Hübner) to emamectin benzoate, chlorantraniliprole, and indoxacarb was determined in feeding assays on insecticide-incorporated artificial diet in the laboratory. The intraspecific variation of H. armigera was established from field populations collected between September 2012 and March 2013, primarily from commercial farms across eastern Australia. Emamectin benzoate had the highest toxicity with a median lethal concentration (LC50) of 0.01 µg/ml diet (n=20 strains). The LC50 for chlorantraniliprole was 0.03 µg/ml diet (n=21 strains), while indoxacarb had the lowest relative toxicity with an average LC50 of 0.3 µg/ml diet (n=22 strains). Variation in susceptibility amongst field strains was 2.3-fold for emamectin benzoate and 2.9-fold for chlorantraniliprole and indoxacarb. Discriminating concentrations of 0.2, 1, and 12 µg of insecticide per milliliter of diet for emamectin benzoate, chlorantraniliprole, and indoxacarb, respectively, were calculated from toxicological data from field H. armigera strains as a first step in resistance management of these classes of insecticide in Australia. The low intraspecific tolerance, high slope values, and goodness-of-fit to a probit binomial model obtained in this study suggest that a feeding assay using diet incorporated insecticide is an effective laboratory method for measuring the dose-responses of these classes of insecticides in H. armigera. © The Authors 2015. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  7. Life table and consumption capacity of corn earworm, Helicoverpa armigera, fed asparagus, Asparagus officinalis.

    Science.gov (United States)

    Jha, Ratna Kumar; Tuan, Shu-Jen; Chi, Hsin; Tang, Li-Cheng

    2014-03-01

    The life table and consumption rate of Helicoverpa armigera (Hübner) (Lepidoptera: Noctuidae) reared on asparagus, Asparagus officinalis L. (Asparagales: Asparagaceae) were studied under laboratory conditions to assess their interaction. Development, survival, fecundity, and consumption data were analyzed by the age-stage, twosex life table. This study indicated that asparagus is a natural host of H. armigera. However, the poor nutritional content in asparagus foliage and the poor fitness of H. armigera that fed on asparagus indicated that asparagus is a suboptimal host in comparison to hybrid sweet corn. The uncertainty associated with life table parameters was estimated by using jackknife and bootstrap techniques, and the results were compared for statistical inference. The intrinsic rate of increase (r), finite rate of increase (λ), net reproductive rate (R0), and mean generation time (T) were estimated by the jackknife technique to be 0.0780 day(-1), 1.0811 day(-1), 67.4 offspring, and 54.8 days, respectively, while those estimated by the bootstrap technique were 0.0752 day(-1), 1.0781 day(-1), 68.0 offspring, and 55.3 days, respectively. The net consumption rate of H. armigera, as estimated by the jackknife and bootstrap technique, was 1183.02 and 1132.9 mg per individual, respectively. The frequency distribution of sample means obtained by the jackknife technique failed the normality test, while the bootstrap results fit the normal distribution well. By contrast, the relationship between the mean fecundity and the net reproductive rate, as estimated by the bootstrap technique, was slightly inconsistent with the relationship found by mathematical proof. The application of the jackknife and bootstrap techniques in estimating population parameters requires further examination. This is an open access paper. We use the Creative Commons Attribution 3.0 license that permits unrestricted use, provided that the paper is properly attributed.

  8. A toxin-binding alkaline phosphatase fragment synergizes Bt toxin Cry1Ac against susceptible and resistant Helicoverpa armigera.

    Directory of Open Access Journals (Sweden)

    Wenbo Chen

    Full Text Available Evolution of resistance by insects threatens the continued success of pest control using insecticidal crystal (Cry proteins from the bacterium Bacillus thuringiensis (Bt in sprays and transgenic plants. In this study, laboratory selection with Cry1Ac yielded five strains of cotton bollworm, Helicoverpa armigera, with resistance ratios at the median lethal concentration (LC50 of activated Cry1Ac ranging from 22 to 1700. Reduced activity and reduced transcription of an alkaline phosphatase protein that binds Cry1Ac was associated with resistance to Cry1Ac in the four most resistant strains. A Cry1Ac-binding fragment of alkaline phosphatase from H. armigera (HaALP1f was not toxic by itself, but it increased mortality caused by Cry1Ac in a susceptible strain and in all five resistant strains. Although synergism of Bt toxins against susceptible insects by toxin-binding fragments of cadherin and aminopeptidase N has been reported previously, the results here provide the first evidence of synergism of a Bt toxin by a toxin-binding fragment of alkaline phosphatase. The results here also provide the first evidence of synergism of a Bt toxin by any toxin-binding peptide against resistant insects.

  9. Genomic sequencing and analyses of HearMNPV—a new Multinucleocapsid nucleopolyhedrovirus isolated from Helicoverpa armigera

    Directory of Open Access Journals (Sweden)

    Tang Ping

    2012-08-01

    Full Text Available Abstract Background HearMNPV, a nucleopolyhedrovirus (NPV, which infects the cotton bollworm, Helicoverpa armigera, comprises multiple rod-shaped nucleocapsids in virion(as detected by electron microscopy. HearMNPV shows a different host range compared with H. armigera single-nucleocapsid NPV (HearSNPV. To better understand HearMNPV, the HearMNPV genome was sequenced and analyzed. Methods The morphology of HearMNPV was observed by electron microscope. The qPCR was used to determine the replication kinetics of HearMNPV infectious for H. armigera in vivo. A random genomic library of HearMNPV was constructed according to the “partial filling-in” method, the sequence and organization of the HearMNPV genome was analyzed and compared with sequence data from other baculoviruses. Results Real time qPCR showed that HearMNPV DNA replication included a decreasing phase, latent phase, exponential phase, and a stationary phase during infection of H. armigera. The HearMNPV genome consists of 154,196 base pairs, with a G + C content of 40.07%. 162 putative ORFs were detected in the HearMNPV genome, which represented 90.16% of the genome. The remaining 9.84% constitute four homologous regions and other non-coding regions. The gene content and gene arrangement in HearMNPV were most similar to those of Mamestra configurata NPV-B (MacoNPV-B, but was different to HearSNPV. Comparison of the genome of HearMNPV and MacoNPV-B suggested that HearMNPV has a deletion of a 5.4-kb fragment containing five ORFs. In addition, HearMNPV orf66, bro genes, and hrs are different to the corresponding parts of the MacoNPV-B genome. Conclusions HearMNPV can replicate in vivo in H. armigera and in vitro, and is a new NPV isolate distinguished from HearSNPV. HearMNPV is most closely related to MacoNPV-B, but has a distinct genomic structure, content, and organization.

  10. Functional specificity of sex pheromone receptors in the cotton bollworm Helicoverpa armigera.

    Directory of Open Access Journals (Sweden)

    Yang Liu

    Full Text Available Male moths can accurately perceive the sex pheromone emitted from conspecific females by their highly accurate and specific olfactory sensory system. Pheromone receptors are of special importance in moth pheromone reception because of their central role in chemosensory signal transduction processes that occur in olfactory receptor neurons in the male antennae. There are a number of pheromone receptor genes have been cloned, however, only a few have been functionally characterized. Here we cloned six full-length pheromone receptor genes from Helicoverpa armigera male antennae. Real-time PCR showing all genes exhibited male-biased expression in adult antennae. Functional analyses of the six pheromone receptor genes were then conducted in the heterologous expression system of Xenopus oocytes. HarmOR13 was found to be a specific receptor for the major sex pheromone component Z11-16:Ald. HarmOR6 was equally tuned to both of Z9-16: Ald and Z9-14: Ald. HarmOR16 was sensitively tuned to Z11-16: OH. HarmOR11, HarmOR14 and HarmOR15 failed to respond to the tested candidate pheromone compounds. Our experiments elucidated the functions of some pheromone receptor genes of H. armigera. These advances may provide remarkable evidence for intraspecific mating choice and speciation extension in moths at molecular level.

  11. Alterations in the Helicoverpa armigera midgut digestive physiology after ingestion of pigeon pea inducible leucine aminopeptidase.

    Directory of Open Access Journals (Sweden)

    Purushottam R Lomate

    Full Text Available Jasmonate inducible plant leucine aminopeptidase (LAP is proposed to serve as direct defense in the insect midgut. However, exact functions of inducible plant LAPs in the insect midgut remain to be estimated. In the present investigation, we report the direct defensive role of pigeon pea inducible LAP in the midgut of Helicoverpa armigera (Lepidoptera: Noctuidae and responses of midgut soluble aminopeptidases and serine proteinases upon LAP ingestion. Larval growth and survival was significantly reduced on the diets supplemented with pigeon pea LAP. Aminopeptidase activities in larvae remain unaltered in presence or absence of inducible LAP in the diet. On the contrary, serine proteinase activities were significantly decreased in the larvae reared on pigeon pea LAP containing diet as compared to larvae fed on diet without LAP. Our data suggest that pigeon pea inducible LAP is responsible for the degradation of midgut serine proteinases upon ingestion. Reduction in the aminopeptidase activity with LpNA in the H. armigera larvae was compensated with an induction of aminopeptidase activity with ApNA. Our findings could be helpful to further dissect the roles of plant inducible LAPs in the direct plant defense against herbivory.

  12. A Multiplex Real-Time PCR Assay to Diagnose and Separate Helicoverpa armigera and H. zea (Lepidoptera: Noctuidae) in the New World.

    Science.gov (United States)

    Gilligan, Todd M; Tembrock, Luke R; Farris, Roxanne E; Barr, Norman B; van der Straten, Marja J; van de Vossenberg, Bart T L H; Metz-Verschure, Eveline

    2015-01-01

    The Old World bollworm, Helicoverpa armigera (Hübner), and the corn earworm, H. zea (Boddie), are two of the most important agricultural pests in the world. Diagnosing these two species is difficult-adults can only be separated with a complex dissection, and larvae cannot be identified to species using morphology, necessitating the use of geographic origin for identification in most instances. With the discovery of H. armigera in the New World, identification of immature Helicoverpa based on origin is no longer possible because H. zea also occurs in all of the geographic regions where H. armigera has been discovered. DNA barcoding and restriction fragment length polymorphism (RFLP) analyses have been reported in publications to distinguish these species, but these methods both require post-PCR processing (i.e., DNA sequencing or restriction digestion) to complete. We report the first real-time PCR assay to distinguish these pests based on two hydrolysis probes that bind to a segment of the internal transcribed spacer region 2 (ITS2) amplified using a single primer pair. One probe targets H. armigera, the second probe targets H. zea, and a third probe that targets a conserved segment of 18S rDNA is used as a control of DNA quality. The assay can be completed in 50 minutes when using isolated DNA and is successfully tested on larvae intercepted at ports of entry and adults captured during domestic surveys. We demonstrate that the assay can be run in triplex with no negative effects on sensitivity, can be run using alternative real-time PCR reagents and instruments, and does not cross react with other New World Heliothinae.

  13. A Multiplex Real-Time PCR Assay to Diagnose and Separate Helicoverpa armigera and H. zea (Lepidoptera: Noctuidae in the New World.

    Directory of Open Access Journals (Sweden)

    Todd M Gilligan

    Full Text Available The Old World bollworm, Helicoverpa armigera (Hübner, and the corn earworm, H. zea (Boddie, are two of the most important agricultural pests in the world. Diagnosing these two species is difficult-adults can only be separated with a complex dissection, and larvae cannot be identified to species using morphology, necessitating the use of geographic origin for identification in most instances. With the discovery of H. armigera in the New World, identification of immature Helicoverpa based on origin is no longer possible because H. zea also occurs in all of the geographic regions where H. armigera has been discovered. DNA barcoding and restriction fragment length polymorphism (RFLP analyses have been reported in publications to distinguish these species, but these methods both require post-PCR processing (i.e., DNA sequencing or restriction digestion to complete. We report the first real-time PCR assay to distinguish these pests based on two hydrolysis probes that bind to a segment of the internal transcribed spacer region 2 (ITS2 amplified using a single primer pair. One probe targets H. armigera, the second probe targets H. zea, and a third probe that targets a conserved segment of 18S rDNA is used as a control of DNA quality. The assay can be completed in 50 minutes when using isolated DNA and is successfully tested on larvae intercepted at ports of entry and adults captured during domestic surveys. We demonstrate that the assay can be run in triplex with no negative effects on sensitivity, can be run using alternative real-time PCR reagents and instruments, and does not cross react with other New World Heliothinae.

  14. Insecticidal activity of venomous saliva from Rhynocoris fuscipes (Reduviidae against Spodoptera litura and Helicoverpa armigera by microinjection and oral administration

    Directory of Open Access Journals (Sweden)

    K Sahayaraj

    2011-01-01

    Full Text Available Rhynocoris fuscipes is a potential predator of many economically important pests in India. In the present study, its venomous saliva (VS was collected by milking and diluted with HPLC grade water to different concentrations (200, 400, 600, 800 and 1000 ppm. Microinjection of Rhynocoris fuscipes VS was more toxic than its oral administration in Helicoverpa armigera (cotton bollworm and Spodoptera litura (tobacco cutworm. Thus, R. fuscipes VS was found to be toxic to third instar S. litura and H. armigera with respective LD50s of 846.35 and 861.60 ppm/larva at 96 hours after microinjection. The current results showed that VS of Rhynocoris fuscipes caused mortality of H. armigera and S. litura. Active peptides from VS may be isolated, identified and assessed for their impact in order to ascertain how they alter the physiology of these pests, information that could be applicable in pest management programs.

  15. Next-generation sequencing-based transcriptome analysis of Helicoverpa armigera Larvae immune-primed with Photorhabdus luminescens TT01.

    Directory of Open Access Journals (Sweden)

    Zengyang Zhao

    Full Text Available Although invertebrates are incapable of adaptive immunity, immunal reactions which are functionally similar to the adaptive immunity of vertebrates have been described in many studies of invertebrates including insects. The phenomenon was termed immune priming. In order to understand the molecular mechanism of immune priming, we employed Illumina/Solexa platform to investigate the transcriptional changes of the hemocytes and fat body of Helicoverpa armigera larvae immune-primed with the pathogenic bacteria Photorhabdus luminescens TT01. A total of 43.6 and 65.1 million clean reads with 4.4 and 6.5 gigabase sequence data were obtained from the TT01 (the immune-primed and PBS (non-primed cDNA libraries and assembled into 35,707 all-unigenes (non-redundant transcripts, which has a length varied from 201 to 16,947 bp and a N50 length of 1,997 bp. For 35,707 all-unigenes, 20,438 were functionally annotated and 2,494 were differentially expressed after immune priming. The differentially expressed genes (DEGs are mainly related to immunity, detoxification, development and metabolism of the host insect. Analysis on the annotated immune related DEGs supported a hypothesis that we proposed previously: the immune priming phenomenon observed in H. armigera larvae was achieved by regulation of key innate immune elements. The transcriptome profiling data sets (especially the sequences of 1,022 unannotated DEGs and the clues (such as those on immune-related signal and regulatory pathways obtained from this study will facilitate immune-related novel gene discovery and provide valuable information for further exploring the molecular mechanism of immune priming of invertebrates. All these will increase our understanding of invertebrate immunity which may provide new approaches to control insect pests or prevent epidemic of infectious diseases in economic invertebrates in the future.

  16. Targeting chitinase gene of Helicoverpa armigera by host-induced RNA interference confers insect resistance in tobacco and tomato.

    Science.gov (United States)

    Mamta; Reddy, K R K; Rajam, M V

    2016-02-01

    Helicoverpa armigera Hübner (Lepidoptera: Noctuidae) is a devastating agricultural insect pest with broad spectrum of host range, causing million dollars crop loss annually. Limitations in the present conventional and transgenic approaches have made it crucial to develop sustainable and environmental friendly methods for crop improvement. In the present study, host-induced RNA interference (HI-RNAi) approach was used to develop H. armigera resistant tobacco and tomato plants. Chitinase (HaCHI) gene, critically required for insect molting and metamorphosis was selected as a potential target. Hair-pin RNAi construct was prepared from the conserved off-target free partial HaCHI gene sequence and was used to generate several HaCHI-RNAi tobacco and tomato plants. Northern hybridization confirmed the production of HaCHI gene-specific siRNAs in HaCHI-RNAi tobacco and tomato lines. Continuous feeding on leaves of RNAi lines drastically reduced the target gene transcripts and consequently, affected the overall growth and survival of H. armigera. Various developmental deformities were also manifested in H. armigera larvae after feeding on the leaves of RNAi lines. These results demonstrated the role of chitinase in insect development and potential of HI-RNAi for effective management of H. armigera.

  17. Induced resistance to Helicoverpa armigera through exogenous application of jasmonic acid and salicylic acid in groundnut, Arachis hypogaea.

    Science.gov (United States)

    War, Abdul Rashid; Paulraj, Michael Gabriel; Ignacimuthu, Savarimuthu; Sharma, Hari Chand

    2015-01-01

    Induced resistance to Helicoverpa armigera through exogenous application of jasmonic acid (JA) and salicylic acid (SA) was studied in groundnut genotypes (ICGV 86699, ICGV 86031, ICG 2271 and ICG 1697) with different levels of resistance to insects and the susceptible check JL 24 under greenhouse conditions. Activities of oxidative enzymes and the amounts of secondary metabolites and proteins were quantified at 6 days after JA and SA application/insect infestation. Data were also recorded on plant damage and H. armigera larval weights and survival. Higher levels of enzymatic activities and amounts of secondary metabolites were observed in the insect-resistant genotypes pretreated with JA and then infested with H. armigera than in JL 24. The insect-resistant genotypes suffered lower insect damage and resulted in poor survival and lower weights of H. armigera larvae than JL 24. In some cases, JA and SA showed similar effects. JA and SA induced the activity of antioxidative enzymes in groundnut plants against H. armigera, and reduced its growth and development. However, induced response to application of JA was greater than to SA, and resulted in reduced plant damage, and larval weights and survival, suggesting that induced resistance can be used as a component of pest management in groundnut. © 2014 Society of Chemical Industry.

  18. Cotton bollworm, Helicoverpa armigera (Lepidoptera: Noctuidae): Large scale rearing and the effect of gamma radiation on selected life history parameters of this pest in China

    International Nuclear Information System (INIS)

    Lu Daguang; Liu Xiaohui; Hu Jiangguo; Wang Endong; He Qiulan; Li Yongjun

    2002-01-01

    Effective large scale rearing of the cotton bollworm, Helicoverpa armigera (Huebner), has been developed in China. A 'celled unit' system was developed to replace the traditional test tube for cotton bollworm laboratory rearing. Larvae are reared at 26.5 deg. C, ∼ 70% RH, and a long day photoperiod of 14L:10D. Pupae are harvested at about day 20. Percent adult emergence is between 89-93%, and adult females lay an average of 768 eggs. Under this rearing system one generation is completed in 40-42 days and percent pupation is about 66-71%. Mature Helicoverpa armigera female and male pupae were treated with different doses of gamma radiation and out-crossed with untreated mates. Mating ability of both sexes was not affected by radiation. Treated females were highly sterile and laid significantly fewer eggs than untreated controls. Females treated with 300 Gy were completely sterile, while females treated with 250 Gy and 200 Gy still had minimal residual fertility. (author)

  19. Cantharidin Impedes Activity of Glutathione S-Transferase in the Midgut of Helicoverpa armigera Hübner

    Directory of Open Access Journals (Sweden)

    Ya Lin Zhang

    2013-03-01

    Full Text Available Previous investigations have implicated glutathione S-transferases (GSTs as one of the major reasons for insecticide resistance. Therefore, effectiveness of new candidate compounds depends on their ability to inhibit GSTs to prevent metabolic detoxification by insects. Cantharidin, a terpenoid compound of insect origin, has been developed as a bio-pesticide in China, and proves highly toxic to a wide range of insects, especially lepidopteran. In the present study, we test cantharidin as a model compound for its toxicity, effects on the mRNA transcription of a model Helicoverpa armigera glutathione S-transferase gene (HaGST and also for its putative inhibitory effect on the catalytic activity of GSTs, both in vivo and in vitro in Helicoverpa armigera, employing molecular and biochemical methods. Bioassay results showed that cantharidin was highly toxic to H. armigera. Real-time qPCR showed down-regulation of the HaGST at the mRNA transcript ranging from 2.5 to 12.5 folds while biochemical assays showed in vivo inhibition of GSTs in midgut and in vitro inhibition of rHaGST. Binding of cantharidin to HaGST was rationalized by homology and molecular docking simulations using a model GST (1PN9 as a template structure. Molecular docking simulations also confirmed accurate docking of the cantharidin molecule to the active site of HaGST impeding its catalytic activity.

  20. Characterization of protein phosphatase 5 from three lepidopteran insects: Helicoverpa armigera, Mythimna separata and Plutella xylostella.

    Directory of Open Access Journals (Sweden)

    Xi'en Chen

    Full Text Available Protein phosphatase 5 (PP5, a unique member of serine/threonine phosphatases, regulates a variety of biological processes. We obtained full-length PP5 cDNAs from three lepidopteran insects, Helicoverpa armigera, Mythimna separata and Plutella xylostella, encoding predicted proteins of 490 (55.98 kDa, 490 (55.82 kDa and 491 (56.07 kDa amino acids, respectively. These sequences shared a high identity with other insect PP5s and contained the TPR (tetratricopeptide repeat domains at N-terminal regions and highly conserved C-terminal catalytic domains. Tissue- and stage-specific expression pattern analyses revealed these three PP5 genes were constitutively expressed in all stages and in tested tissues with predominant transcription occurring at the egg and adult stages. Activities of Escherichia coli-produced recombinant PP5 proteins could be enhanced by almost 2-fold by a known PP5 activator: arachidonic acid. Kinetic parameters of three recombinant proteins against substrate pNPP were similar both in the absence or presence of arachidonic acid. Protein phosphatases inhibitors, okadaic acid, cantharidin, and endothall strongly impeded the activities of the three recombinant PP5 proteins, as well as exerted an inhibitory effect on crude protein phosphatases extractions from these three insects. In summary, lepidopteran PP5s share similar characteristics and are all sensitive to the protein phosphatases inhibitors. Our results also imply protein phosphatase inhibitors might be used in the management of lepidopteran pests.

  1. Mitochondrial DNA and trade data support multiple origins of Helicoverpa armigera (Lepidoptera, Noctuidae) in Brazil

    Science.gov (United States)

    Tay, Wee Tek; Walsh, Thomas K.; Downes, Sharon; Anderson, Craig; Jermiin, Lars S.; Wong, Thomas K. F.; Piper, Melissa C.; Chang, Ester Silva; Macedo, Isabella Barony; Czepak, Cecilia; Behere, Gajanan T.; Silvie, Pierre; Soria, Miguel F.; Frayssinet, Marie; Gordon, Karl H. J.

    2017-03-01

    The Old World bollworm Helicoverpa armigera is now established in Brazil but efforts to identify incursion origin(s) and pathway(s) have met with limited success due to the patchiness of available data. Using international agricultural/horticultural commodity trade data and mitochondrial DNA (mtDNA) cytochrome oxidase I (COI) and cytochrome b (Cyt b) gene markers, we inferred the origins and incursion pathways into Brazil. We detected 20 mtDNA haplotypes from six Brazilian states, eight of which were new to our 97 global COI-Cyt b haplotype database. Direct sequence matches indicated five Brazilian haplotypes had Asian, African, and European origins. We identified 45 parsimoniously informative sites and multiple substitutions per site within the concatenated (945 bp) nucleotide dataset, implying that probabilistic phylogenetic analysis methods are needed. High diversity and signatures of uniquely shared haplotypes with diverse localities combined with the trade data suggested multiple incursions and introduction origins in Brazil. Increasing agricultural/horticultural trade activities between the Old and New Worlds represents a significant biosecurity risk factor. Identifying pest origins will enable resistance profiling that reflects countries of origin to be included when developing a resistance management strategy, while identifying incursion pathways will improve biosecurity protocols and risk analysis at biosecurity hotspots including national ports.

  2. Comparative analysis of the protein compositions between wild type and body color mutant of helicoverpa armigera adult

    International Nuclear Information System (INIS)

    He Lihua; Chen Jin'e; Liu Yan; Wang Yongqiang; Liu Peigang; Meng Zhiqi

    2012-01-01

    To gain an in-depth understanding of the fineness and regulation mechanism of body color mutant of Helicoverpa armigera Hbner, the protein composition differences between adult of dominant mutant, recessive mutant and wild type were studied using the SDS-PAGE combined with MALDI-TOF-TOF/MS and bioinformatics analysis. The results indicated that the protein composition of the dominant mutant and wild type had little difference. However, there were obvious differences between the recessive mutant and wild-type. Three specific stripe were chosen for mass spectrometry and bioinformatics analysis, and two types of proteins related to energy metabolism and cytoskeleton were identified. These findings suggested that the two types of proteins may be associated with occurrence and regulation of body color mutant traits of H. armigera. (authors)

  3. Over-expression of multiple cytochrome P450 genes in fenvalerate-resistant field strains of Helicoverpa armigera from north of China.

    Science.gov (United States)

    Xu, Li; Li, Dongzhi; Qin, Jianying; Zhao, Weisong; Qiu, Lihong

    2016-09-01

    Pyrethroid resistance was one of the main reasons for control failure of cotton bollworm Helicoverpa armigera (Hübner) in China. The promotion of Bt crops decreased the application of chemical insecticides in controlling H.armigera. However, the cotton bollworm still kept high levels of resistance to fenvalerate. In this study, the resistance levels of 8 field-collected strains of H. armigera from north of China to 4 insecticides, as well as the expression levels of related P450 genes were investigated. The results of bioassay indicated that the resistance levels to fenvalerate in the field strains varied from 5.4- to 114.7-fold, while the resistance levels to lambda-cyhalothrin, phoxim and methomyl were low, which were ranged from 1.5- to 5.2-, 0.2- to 1.6-, and 2.9- to 8.3- fold, respectively, compared to a susceptible strain. Synergistic experiment showed that PBO was the most effective synergist in increasing the sensitivity of H. armigera to fenvalerate, suggesting that P450 enzymes were involved in the pyrethroid resistance in the field strains. The results of quantitative RT-PCR indicated that eight P450 genes (CYP332A1, CYP4L11, CYP4L5, CYP4M6, CYP4M7, CYP6B7, CYP9A12, CYP9A14) were all significantly overexpressed in Hejian1 and Xiajin1 strains of H. armigera collected in 2013, and CYP4L5 was significantly overexpressed in all the 6 field strains collected in 2014. CYP332A1, CYP6B7 and CYP9A12 had very high overexpression levels in all the field strains, indicating their important roles in fenvalerate resistance. The results suggested that multiple P450 genes were involved in the high-level fenvalerate-resistance in different field strains of H. armigera collected from north of China. Copyright © 2016 Elsevier B.V. All rights reserved.

  4. Trans-generational desensitization and within-generational resensitization of a sucrose-best neuron in the polyphagous herbivore Helicoverpa armigera (Lepidoptera: Noctuidae)

    NARCIS (Netherlands)

    Ma, Ying; Li, Jingjing; Tang, Qingbo; Zhang, Xuening; Zhao, Xincheng; Yan, Fengming; Loon, van Joop J.A.

    2016-01-01

    Dietary exposure of insects to a feeding deterrent substance for hours to days can induce habituation and concomitant desensitization of the response of peripheral gustatory neurons to such a substance. In the present study, larvae of the herbivore Helicoverpa armigera were fed on diets

  5. Effects of Helicoverpa armigera (Noctuidae, Lepidoptera) host stages on some developmental parameters of the uniparental endoparasitoid Meteorus pulchricornis (Braconidae, Hymenoptera).

    Science.gov (United States)

    Liu, Ya-Hui; Li, Bao-Ping

    2008-04-01

    A single choice test was performed to examine developmental strategies in the uniparental endoparasitoid Meteorus pulchricornis and its host, the cotton bollworm Helicoverpa armigera. The results support the dome-shaped model in which the fitness functions are 'dome-shaped' relative to size (and age) of host at parasitism. Older and, hence, larger host larvae were simply not better hosts for the developing parasitoids. Although parasitoid size (measured as cocoon weight and adult hind tibia length) was positively correlated with host instars at parasitism, parasitoids developing in larger hosts (L5 and L6) suffered much higher mortality than conspecifics developing in smaller hosts (L2-L4). Furthermore, egg-to-adult development time in M. pulchricornis was significantly longer in older host larvae (L4-L6) than in the younger. Performance of M. pulchricornis, as indicated by fitness-related traits, strongly suggests that the L3 host is the most suitable for survival, growth and development of the parasitoid, followed by both L2 and L4 hosts; whereas, L1, L5 and L6 are the least favourable hosts. The oviposition tendency of M. pulchricornis, represented by parasitism level, was not perfectly consistent with the performance of the offspring; L2-L4 hosts, although with the same parasitism level, had offspring parasitoids with differences in fitness-related performance. Larval development in Helicoverpa armigera was usually suspended, but occasionally advanced, in the final instar.

  6. Acute, sublethal and combination effects of azadirachtin and Bacillus thuringiensis toxins on Helicoverpa armigera (Lepidoptera: Noctuidae) larvae.

    Science.gov (United States)

    Singh, G; Rup, P J; Koul, Opender

    2007-08-01

    The efficacy of neem (1500 ppm azadirachtin (AI)), Delfin WG, a biological insecticide based on selected strain of Bacillus thuringiensis Berliner (Bt) subspecies kurstaki, and Cry1Ac protein, either individually or in combination, were examined against first to fourth instar Helicoverpa armigera (Hübner) larvae. Using an oral administration method, various growth inhibitory concentrations (EC) and lethal concentrations (LC) were determined for each bioagent. Combinations of sublethal concentrations of Bt spray formulation with azadirachtin at EC50 or EC95 levels not only enhanced the toxicity, but also reduced the duration of action when used in a mixture. The LC20 and LC50 values for Cry1Ac toxin were 0.06 and 0.22 microg ml-1, respectively. Bt-azadirachtin combinations of LC50+EC20 and LC50+EC50 result in 100% mortality. The mortality also was significant in LC20+EC20 and LC20+EC50 mixtures. These studies imply that the combined action is not synergistic but complimentary, with azadirachtin particularly facilitating the action of Bt. The Bt spray-azadirachtin combination is more economical than combinations that involve isolating the toxic protein, as the Bt spray formulations can be combined in a spray mixture with neem. These combinations may be useful for controlling bollworm populations that have acquired resistance to Bt as they may not survive the effect of mixture. Azadirachtin may be useful as a means of reducing the endotoxin concentrations in a mixture, to promote increased economic savings and further reduce the probability of resistance development to either insect control agent.

  7. LABORATORY AND FIELD EVALUATION OF ESSENTIAL OILS FROM Cymbopogon nardus AS OVIPOSITION DETERRENT AND OVICIDAL ACTIVITIES AGAINST Helicoverpa armigera Hubner ON CHILI PEPPER

    Directory of Open Access Journals (Sweden)

    Wiwin Setiawati

    2011-04-01

    Full Text Available The fruit borer (Helicoverpa armigera Hubner is one of the key pests of chili pepper in Indonesia. Yield loss due to this insect pest may reach up to 60%. Chemical treatment for con-trolling this insect pest is ineffective and eventually leads to environmental pollution. More environmentally safe insecticides are developed based on natural plant ingredients as their active compound such as essential oils. This study aimed to assess the potential of citronella oil for managing H. armigera on chili pepper. The experiments were conducted at the Indonesian Vegetables Research Institute from April 2009 to March 2010 and in Cirebon, West Java from November 2009 to March 2010. A field experiment was designed in a randomized complete block design with five treatments and replicated five times. Citronella oil was extracted by steam distillation from Cymbo-pogon  nardus. The oil was then chemically characterized by using GC-MS and its efficacy (ovicidal and feeding deterrent against H. armigera was tested both in laboratory and field conditions. The GC-MS result showed that major chemical compounds of the citronella oil used were citronella (35.97%, nerol (17.28%, citronellol (10.03%, geranyle acetate (4.44%, elemol (4.38%, limonene (3.98%, and citronnellyle acetate (3.51%. The laboratory experiment revealed that the highest concentration (4,000 ppm of citronella oil reduced egg laying by 53-66%. Ovicidal activity was concentration dependent, and egg hatchability decreased by 15-95% compared to control. The field experiment showed that treatment of citronella oil at 2.0 mL L-1 significantly reduced fruit damage by H. armigera similar to the plots treated with spinosad at the recommended dose (60 g ai ha-1. Application of citronella oil significantly reduced fruit damage by 72% and increased quality of the chili pepper. Because oviposition and feeding deterrent properties are key factors in controlling the pest, therefore this study revealed that

  8. Insecticidal Efficacy of Azadirachta indica, Nucleopolyhedrovirus and Chlorantraniliprole Singly or Combined against Field Populations fo Helicoverpa armigera Hübner (Lepidoptera: Noctuidae Eficacia Insecticida de Azadirachta indica, Nucleopolihedrovirus y Clorantraniliprol solo y sus Aplicaciones Integradas contra Poblaciones de Campo de Helicoverpa armigera Hübner (Lepidoptera: Noctuidae

    Directory of Open Access Journals (Sweden)

    Waqas Wakil

    2012-03-01

    Full Text Available The development of resistance in cosmopolitan insect Helicoverpa armigera Hubner (Lepidoptera: Noctuidae forced the researchers for alternative control measures. In the present study, insecticidal efficacy of formulations of Azadirachta indica, a Nucleopolyhedrovirus (NPV, and new anthranilic diamide insecticide (chlorantraniliprole formulations was determined against 2nd, through 5th larval instars of H. armigera collected from diverse geographical locations in the Punjab province, Pakistan. Azadirachta indica was applied at 5 μL L-1; NPV at 2.1 x 10(5 polyhedral occlusion bodies (POB mL4 and chlorantraniliprole at 0.01 μL L-1, either alone or in combinations with each other. The bioassays were conducted at 27 ± 1 °C and 65 ± 5% relative humidity. The mortality varied greatly among treatments, larval instars, and locations. The combinations of NPV with A. indica and chlorantraniliprole caused higher mortality, pupation and produced an additive effect compared to their application singly in all the tested populations. The population from Rawalpindi was always susceptible while the Gujranwala was the resistant. The results herein suggest that the effectiveness of NPV and A. indica can be improved by the presence of chlorantraniliprole against the larvae of H. armigera.Se determinó la eficacia insecticida de formulaciones de Azadirachta indica, Nucleopolihedrovirus (VPN y el nuevo insecticida diamida antranílico (clorantraniliprol en contra de segundo, tercero, cuarto y quinto estadios larvales de Helicoverpa armigera Hubner (Lepidoptera: Noctuidae recogidos de diversas ubicaciones geográficas de la provincia de Punjab, Pakistán. Azadirachta indica se aplicó en dosis de 5 μL L-1; VPN en dosis 2.1 x 10(5 POB mL-1 y clorantraniliprol fue 0,01 μL L-1 ya sea solos o en combinaciones. Los bioensayos se realizaron a 27 ± 1 °C y 65 ± 5% de humedad relativa. La mortalidad fue notablemente variada entre los tratamientos, estadios larvales y

  9. Assessment of beneficial role of an insectivorous bird, jungle babbler (Turdoides striatus predation, on Helicoverpa armigera infesting pigeon pea (Cajanus cajan crop

    Directory of Open Access Journals (Sweden)

    Bharucha Bhavna

    2010-06-01

    Full Text Available Jungle babbler (Turdoides striatus, a widely spread sub-tropical insectivorous passerine is considered beneficial to agro-ecosystem, as they devour voraciously on insect matter especially Helicoverpa armigera, the gram pod borer, a notorious pest infesting and causing heavy loses to crops like pigeon pea (Cajanus cajan which is a vital crop of semi-arid tropical and subtropical farming system, providing high quality vegetable protein. Helicoverpa is known to feed on flowers, pods, and seeds and is the most important biotic constraint affecting pigeon pea yields. Jungle babblers have a peculiar foraging style which helps expose the Helicoverpa larvae as well as pupae through various phenological stages of pigeon pea. For comparative assessment of their beneficial role and as a possible bio control agent, in Baroda city (State of Gaujarat, India, was studied, two crops of pigeon pea (insecticide treated and untreated (control were selected. In both treated and control crops, the number of jungle babblers were maximum in pigeon pea fields during october and november in both small pod stage and large pod stage which had heavy infestation of Helicoverpa. Least number of birds was seen during the flowering stage in September. Later in treatment crop three applications of Dunnate and Monocrotophos insecticide spray was done after which the pest population decreased which is reflected in number of birds in the field, while the bird number in control crops grew since insecticide spray was not done and number of larvae increased with the stage of the crop. Along with the main crop pigeon pea, comparative study was also done to see the food preference by these birds in crops like sorghum, maize, cow pea and ploughed and unploughed fields. Maximum number of birds was seen in unploughed field and least in sorghum suggesting that Helicoverpa is preferred food over sorghum grains thus pigeon pea

  10. Silencing of HaAce1 gene by host-delivered artificial microRNA disrupts growth and development of Helicoverpa armigera.

    Science.gov (United States)

    Saini, Ravi Prakash; Raman, Venkat; Dhandapani, Gurusamy; Malhotra, Era Vaidya; Sreevathsa, Rohini; Kumar, Polumetla Ananda; Sharma, Tilak R; Pattanayak, Debasis

    2018-01-01

    The polyphagous insect-pest, Helicoverpa armigera, is a serious threat to a number of economically important crops. Chemical application and/or cultivation of Bt transgenic crops are the two strategies available now for insect-pest management. However, environmental pollution and long-term sustainability are major concerns against these two options. RNAi is now considered as a promising technology to complement Bt to tackle insect-pests menace. In this study, we report host-delivered silencing of HaAce1 gene, encoding the predominant isoform of H. armigera acetylcholinesterase, by an artificial microRNA, HaAce1-amiR1. Arabidopsis pre-miRNA164b was modified by replacing miR164b/miR164b* sequences with HaAce1-amiR1/HaAce1-amiR1* sequences. The recombinant HaAce1-preamiRNA1 was put under the control of CaMV 35S promoter and NOS terminator of plant binary vector pBI121, and the resultant vector cassette was used for tobacco transformation. Two transgenic tobacco lines expressing HaAce1-amiR1 was used for detached leaf insect feeding bioassays. Larval mortality of 25% and adult deformity of 20% were observed in transgenic treated insect group over that control tobacco treated insect group. The reduction in the steady-state level of HaAce1 mRNA was 70-80% in the defective adults compared to control. Our results demonstrate promise for host-delivered amiRNA-mediated silencing of HaAce1 gene for H. armigera management.

  11. Field evolved resistance in Helicoverpa armigera (Lepidoptera: Noctuidae to Bacillus thuringiensis toxin Cry1Ac in Pakistan.

    Directory of Open Access Journals (Sweden)

    Anwaar H K Alvi

    Full Text Available Helicoverpa armigera (Hübner is one of the most destructive pests of several field and vegetable crops, with indiscriminate use of insecticides contributing to multiple instances of resistance. In the present study we assessed whether H. armigera had developed resistance to Bt cotton and compared the results with several conventional insecticides. Furthermore, the genetics of resistance was also investigated to determine the inheritance to Cry1Ac resistance. To investigate the development of resistance to Bt cotton, and selected foliar insecticides, H. armigera populations were sampled in 2010 and 2011 in several cotton production regions in Pakistan. The resistance ratios (RR for Cry1Ac, chlorpyrifos, profenofos, cypermethrin, spinosad, indoxacarb, abamectin and deltamethrin were 580-fold, 320-, 1110-, 1950-, 200-, 380, 690, and 40-fold, respectively, compared with the laboratory susceptible (Lab-PK population. Selection of the field collected population with Cry1Ac in 2010 for five generations increased RR to 5440-fold. The selection also increased RR for deltamethrin, chlorpyrifos, profenofos, cypermethrin, spinosad, indoxacarb, abamectin to 125-folds, 650-, 2840-, 9830-, 370-, 3090-, 1330-fold. The estimated LC(50s for reciprocal crosses were 105 µg/ml (Cry1Ac-SEL female × Lab-PK male and 81 g µg/ml (Lab-PK female × Cry1Ac-SEL male suggesting that the resistance to Cry1Ac was autosomal; the degree of dominance (D(LC was 0.60 and 0.57 respectively. Mixing of enzyme inhibitors significantly decreased resistance to Cry1Ac suggesting that the resistance to Cry1Ac and other insecticides tested in the present study was primarily metabolic. Resistance to Cry1Ac was probably due to a single but unstable factor suggesting that crop rotation with non-Bt cotton or other crops could reduce the selection pressure for H. armigera and improve the sustainability of Bt cotton.

  12. Heterologous expression of Helicoverpa armigera cytochrome P450 CYP6B7 in Pichia pastoris and interactions of CYP6B7 with insecticides.

    Science.gov (United States)

    Zhao, Chunqing; Song, Genmiao; Duan, Hongxia; Tang, Tao; Wang, Chen; Qiu, Lihong

    2017-09-01

    Previous studies indicated that constitutive over-expression of cytochrome P450 CYP6B7 was involved in fenvalerate resistance in Helicoverpa armigera. In this study, the CYP6B7 gene from H. armigera (namely HaCYP6B7), was heterologously expressed in Pichia pastoris GS115. A vector pPICZA-HaCYP6B7 was constructed and transformed into P. pastoris GS115, the transformant of pPICZA-HaCYP6B7-GS115 was then cultured and induced by 1% (v/v) methanol and the heterologous expression of HaCYP6B7 protein in P. pastoris was confirmed by SDS-PAGE and western blot. Microsomes containing the expressed HaCYP6B7 showed activities against model substrate p-nitroanisole and 7-ethoxycoumarin, with p-nitroanisole O-demethylation (PNOD) and 7-ethoxycoumarin O-deethylation (ECOD) activities of 15.66- and 4.75-fold of the control, respectively. Moreover, it showed degradation activities against the insecticides bifenthrin, fenvalerate and chlorpyrifos, with clearance activities of 6.88-, 1.49- and 2.27-fold of the control, respectively. The interactions of HaCYP6B7 with insecticides were further confirmed by molecular docking in silico with binding scores of 5.450, 5.295 and 2.197 between putative HaCYP6B7 protein and bifenthrin, fenvalerate and chlorpyrifos, respectively. The results of present study provided more direct and important evidence on the role of HaCYP6B7 conferring pyrethroid resistance in H. armigera. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  13. Transgenic plants over-expressing insect-specific microRNA acquire insecticidal activity against Helicoverpa armigera: an alternative to Bt-toxin technology.

    Science.gov (United States)

    Agrawal, Aditi; Rajamani, Vijayalakshmi; Reddy, Vanga Siva; Mukherjee, Sunil Kumar; Bhatnagar, Raj K

    2015-10-01

    The success of Bt transgenics in controlling predation of crops has been tempered by sporadic emergence of resistance in targeted insect larvae. Such emerging threats have prompted the search for novel insecticidal molecules that are specific and could be expressed through plants. We have resorted to small RNA-based technology for an investigative search and focused our attention to an insect-specific miRNA that interferes with the insect molting process resulting in the death of the larvae. In this study, we report the designing of a vector that produces artificial microRNA (amiR), namely amiR-24, which targets the chitinase gene of Helicoverpa armigera. This vector was used as transgene in tobacco. Northern blot and real-time analysis revealed the high level expression of amiR-24 in transgenic tobacco plants. Larvae feeding on the transgenic plants ceased to molt further and eventually died. Our results demonstrate that transgenic tobacco plants can express amiR-24 insectice specific to H. armigera.

  14. Effectiveness of two insect growth regulators against Bemisia tabaci (Gennadius) (Homoptera: Aleyrodidae) and Helicoverpa armigera (Hübner) (Lepidoptera: Noctuidae) and their impact on population densities of arthropod predators in cotton in Pakistan.

    Science.gov (United States)

    Gogi, Muhammad D; Sarfraz, Rana M; Dosdall, Lloyd M; Arif, Muhammad J; Keddie, Andrew B; Ashfaq, Muhammad

    2006-10-01

    Field efficacies of two insect growth regulators (IGRs) at two recommended application rates, buprofezin at 370 and 555 g AI ha(-1) and lufenuron at 37 and 49 g AI ha(-1), were determined against the sweet potato whitefly, Bemisia tabaci (Gennadius), and the cotton bollworm, Helicoverpa armigera (Hübner), in experimental plots of cotton at the Directorate of Cotton Research, Faisalabad, Pakistan. Adverse effects of the IGRs on populations of associated arthropod predators, namely geocorids, chrysopids, coccinellids, formicids and arachnids, were also assessed. Both IGRs significantly reduced populations of B. tabaci at each application rate 24, 48 and 72 h after treatment, and higher doses were more effective than lower doses. Buprofezin was not effective against H. armigera at any tested dose for any time of treatment in any spray. Lufenuron applied at 37 and 49 g AI ha(-1) effectively suppressed H. armigera populations, resulting in significant reductions in crop damage. At lower doses, both IGRs appeared safe to predator populations, which did not differ significantly in IGR-treated versus untreated control plots. Population densities of formicids and coccinellids were significantly lower at high concentrations of both IGRs in treatment plots, possibly as a result of reduced prey availability. The potential role of buprofezin and lufenuron for control of B. tabaci and H. armigera in a spray programme and the likelihood of direct toxic effects of IGRs on predatory fauna of cotton are discussed.

  15. Genetic engineering of cotton with a novel cry2AX1 gene to impart insect resistance against Helicoverpa armigera

    Directory of Open Access Journals (Sweden)

    Karunamurthy Dhivya

    2016-09-01

    Full Text Available Embryogenic calli of cotton (Coker310 were cocultivated with the Agrobacterium tumefaciens strain LBA4404 harbouring the codon-optimised, chimeric cry2AX1 gene consisting of sequences from cry2Aa and cry2Ac genes isolated from Indian strains of Bacillus thuringiensis. Forty-eight putative transgenic plants were regenerated, and PCR analysis of these plants revealed the presence of the cry2AX1 gene in 40 plants. Southern blot hybridisation analysis of selected transgenic plants confirmed stable T-DNA integration in the genome of transformed plants. The level of Cry2AX1 protein expression in PCR positive plants ranged from 4.9 to 187.5 ng g-1 of fresh tissue. A transgenic cotton event, TP31, expressing the cry2AX1 gene showed insecticidal activity of 56.66 per cent mortality against Helicoverpa armigera in detached leaf disc bioassay. These results indicate that the chimeric cry2AX1 gene expressed in transgenic cotton has insecticidal activity against H. armigera.

  16. Role of induced glutathione-S-transferase from Helicoverpa armigera (Lepidoptera: Noctuidae) HaGST-8 in detoxification of pesticides.

    Science.gov (United States)

    Labade, Chaitali P; Jadhav, Abhilash R; Ahire, Mehul; Zinjarde, Smita S; Tamhane, Vaijayanti A

    2018-01-01

    The present study deals with glutathione-S-transferase (GST) based detoxification of pesticides in Helicoverpa armigera and its potential application in eliminating pesticides from the environment. Dietary exposure of a pesticide mixture (organophosphates - chlorpyrifos and dichlorvos, pyrethroid - cypermethrin; 2-15ppm each) to H. armigera larvae resulted in a dose dependant up-regulation of GST activity and gene expression. A variant GST from H. armigera (HaGST-8) was isolated from larvae fed with 10ppm pesticide mixture and it was recombinantly expressed in yeast (Pichia pastoris HaGST-8). HaGST-8 had a molecular mass of 29kDa and was most active at pH 9 at 30°C. GC-MS and LC-HRMS analysis validated that HaGST-8 was effective in eliminating organophosphate type of pesticides and partially reduced the cypermethrin content (53%) from aqueous solutions. Unlike the untransformed yeast, P. pastoris HaGST-8 grew efficiently in media supplemented with pesticide mixtures (200 and 400ppm each pesticide) signifying the detoxification ability of HaGST-8. The amino acid sequence of HaGST-8 and the already reported sequence of HaGST-7 had just 2 mismatches. The studies on molecular interaction strengths revealed that HaGST-8 had stronger binding affinities with organophosphate, pyrethroid, organochloride, carbamate and neonicotinoid type of pesticides. The abilities of recombinant HaGST-8 to eliminate pesticides and P. pastoris HaGST-8 to grow profusely in the presence of high level of pesticide content can be applied for removal of such residues from food, water resources and bioremediation. Copyright © 2017 Elsevier Inc. All rights reserved.

  17. Trans-generational desensitization and within-generational resensitization of a sucrose-best neuron in the polyphagous herbivore Helicoverpa armigera (Lepidoptera: Noctuidae)

    OpenAIRE

    Ying Ma; Jingjing Li; Qingbo Tang; Xuening Zhang; Xincheng Zhao; Fengming Yan; Joop J. A. van Loon

    2016-01-01

    Dietary exposure of insects to a feeding deterrent substance for hours to days can induce habituation and concomitant desensitization of the response of peripheral gustatory neurons to such a substance. In the present study, larvae of the herbivore Helicoverpa armigera were fed on diets containing either a high, medium or low concentration of sucrose, a major feeding stimulant. The responsiveness of the sucrose-best neuron in the lateral sensilla styloconica on the galea was quantified. Resul...

  18. Réponse des stades larvaires de Helicoverpa armigera (Hübner (Lepidoptera : Noctuidae à l'application de champignons entomopathogènes Metarhizium anisopliae et Beauveria bassiana

    Directory of Open Access Journals (Sweden)

    Tamò, M.

    2012-01-01

    Full Text Available Response of the nymphs of Helicoverpa armigera (Hübner (Lepidoptera: Noctuidae to entomopathogenic fungi Metarhizium anisopliae and Beauveria bassiana. Two experiments on dose/mortality response between the instars of Helicoverpa armigera and two strains of entomopathogenic fungi, Metarhizium anisopliae (Met 31 and Beauveria bassiana (Bb 11 were carried out in laboratory conditions. In the first experiment, M. anisopliae Met 31 was tested on the third instar of H. armigera, while in the second experiment, both Met 31 and Bb 11 were tested on the fourth instar. In all the experiments, the following different doses of conidia per insect were used: 104, 105, 106, 107. The following parameters were measured: mortality and sporulation rates, the number of pupae formed and the number of adults that emerged. Abbott's formula was used to correct the treatment mortality rates. LD50 was determined using Cox-regression. For the third instar in experiment one, no significant difference was observed between high doses (106 and 107 conidia per insect. For instar L4, only the dose of 107 conidia per insect showed high mortality rates (74%. For the strain Bb 11, in spite of the variation observed between the mortality rates induced by high doses (106 and 107 conidia per insect, no significant difference was recorded at the 5% level. No mycosis was observed from cadavers resulting from lower doses when tested on L4. The control recorded the highest numbers of pupae and adults. These two parameters were related to the level of dosage: the higher the dose, the lower the numbers of pupae and adults that emerged. For all the strains of fungi used, whatever the larval stage of H. armigera, the dose/mortality response was significant.

  19. PROTECTION OF SWEET CORN FROM OSTRINIA NUBILALIS HBN. AND HELICOVERPA ARMIGERA HBN.

    Science.gov (United States)

    Vuković, S; Indić, D; Grahovac, M; Franeta, F

    2015-01-01

    O. nubilalis and H. armigera regularly occur and cause significant damages in corn crops in Serbia, particularly under global warming conditions. Several measures are applied against these pests (crop rotation, tolerant and resistant hybrids, monitoring, forecast, chemical measures). Larvae damage stem, panicle and ear, which favour development of saprophytes and secondary infections by mycotoxin producing, pathogenic fungi. The aim of the paper was to test the efficacy of the insecticides azadirachtin and indoxacarb in sweet corn protection against the mentioned pests. The trials were conducted in 2014 at two localities (Becej B. and PoIjanice P.) on sweet corn, hybrid Enterprise according to standard OEPP methods (PP1/13; 1/152; 1/135). Products on the basis of azadirachtin (10 g a.i./I of product) at a rate of 0.4 and 0.5% and indoxacarb (150 g a.i./I of product) at a rate of 0.25 I/ha, were applied. Treatments were conducted on the 5th of August with tractor sprayers (high clearance). The plot size was 5000 m². Three assessments were made. The first one prior to treatment, on 25 randomly selected plants per replicate, and the number of O. nubilalis and H. armigera egg masses and larvae on silk was registered. In the second assessment (18th of August), on 20 randomly selected plants per replicate, the number of damaged plants and the number of vital larvae was registered. In the third assessment, immediately before harvest (28th of August, i.e. 12th of September) on 20 randomly selected plants per replicate, the number of plants broken below ear (fallen on the ground), damaged ears and vital larvae, was determined. Results are presented as means, efficacy (E%) according to Abbott and significance of differences by LSD test (5%). At B locality egg masses of O. nubilalis were registered on ear silk on 13-19% of plants and larvae on 3-7%, and larvae of H. armigera on 2-4%. At P locality egg masses of O. nubilalis were present on 34-40.8% of plants. After 13 days

  20. Assessment of beneficial role of an insectivorous bird, jungle babbler (Turdoides striatus predation, on Helicoverpa armigera infesting pigeon pea (Cajanus cajan crop Evaluación del rol benéfico de Turdoides striatus como predator de Helicoverpa armigera en el cultivo de guandul (Cajanus cajan

    Directory of Open Access Journals (Sweden)

    Bhavna Bharucha

    2010-04-01

    Full Text Available Jungle babbler (Turdoides striatus, a widely spread sub-tropical insectivorous passerine is considered beneficial to agro-ecosystem, as they devour voraciously on insect matter especially Helicoverpa armigera, the gram pod borer, a notorious pest infesting and causing heavy loses to crops like pigeon pea (Cajanus cajan which is a vital crop of semi-arid tropical and subtropical farming system, providing high quality vegetable protein. Helicoverpa is known to feed on flowers, pods, and seeds and is the most important biotic constraint affecting pigeon pea yields. Jungle babblers have a peculiar foraging style which helps expose the Helicoverpa larvae as well as pupae through various phenological stages of pigeon pea. For comparative assessment of their beneficial role and as a possible bio control agent, in Baroda city (State of Gaujarat, India, was studied, two crops of pigeon pea (insecticide treated and untreated (control were selected. In both treated and control crops, the number of jungle babblers were maximum in pigeon pea fields during october and november in both small pod stage and large pod stage which had heavy infestation of Helicoverpa. Least number of birds was seen during the flowering stage in September. Later in treatment crop three applications of Dunnate and Monocrotophos insecticide spray was done after which the pest population decreased which is reflected in number of birds in the field, while the bird number in control crops grew since insecticide spray was not done and number of larvae increased with the stage of the crop. Along with the main crop pigeon pea, comparative study was also done to see the food preference by these birds in crops like sorghum, maize, cow pea and ploughed and unploughed fields. Maximum number of birds was seen in unploughed field and least in sorghum suggesting that Helicoverpa is preferred food over sorghum grains thus pigeon pea and sorghum can be used as mixed crops to protect the crop from

  1. Keanekaragaman spesies parasitoid telur Helicoverpa armigera (Hübner pada sistem tanam monokultur dan polikultur kapas

    Directory of Open Access Journals (Sweden)

    nurindah nurindah

    2017-02-01

    Full Text Available Polyculture system is one of techniques in pest management. In Indonesia, cotton is always intercropped with second food crops such as maize, soybean, mungbean or peanut. This research was aimed to evaluate the effect of culture system, i.e. cotton monoculture vs. cotton intercropped with soybean on the increase of species diversity of H. armigera egg parasitoids and the parasitoid contribution to mortality of H. armigera. The research was arranged in a split plot design with two main factors: three cotton varieties with three levels of trichome density (Tamcot SP 37, Kanesia 8 and LRA 5166 and the subplots were two cultivation systems (cotton monoculture and polyculture, with three replicates. Observations were made by collecting H. armigera eggs on population of first generation (45 days after planting and second generation (75 DAP. The results showed that on cotton polyculture the egg parasitoid complex which consisted of Trichogramma spp. and Trichogrammatoidea spp. was higher than that in cotton monoculture and so was the egg parasitism level. The increase of egg parasitism was 24% in the first generation and 15% in the second generation. Parasitoid species found belonged to the genera Trichogramma and Trichogrammatoidea. In the parasitoid complex, Trichogrammatoidea armigera was dominant on the first generation and Trichogramma chilotraeae on the second. The domination succession could be as a result of the higher host-searching capacity of T. chilotraeae than that of T. armigera.

  2. Distribution and Metabolism of Bt-Cry1Ac Toxin in Tissues and Organs of the Cotton Bollworm, Helicoverpa armigera

    Directory of Open Access Journals (Sweden)

    Zhuoya Zhao

    2016-07-01

    Full Text Available Crystal (Cry proteins derived from Bacillus thuringiensis (Bt have been widely used in transgenic crops due to their toxicity against insect pests. However, the distribution and metabolism of these toxins in insect tissues and organs have remained obscure because the target insects do not ingest much toxin. In this study, several Cry1Ac-resistant strains of Helicoverpa armigera, fed artificial diets containing high doses of Cry1Ac toxin, were used to investigate the distribution and metabolism of Cry1Ac in their bodies. Cry1Ac was only detected in larvae, not in pupae or adults. Also, Cry1Ac passed through the midgut into other tissues, such as the hemolymph and fat body, but did not reach the larval integument. Metabolic tests revealed that Cry1Ac degraded most rapidly in the fat body, followed by the hemolymph, peritrophic membrane and its contents. The toxin was metabolized slowly in the midgut, but was degraded in all locations within 48 h. These findings will improve understanding of the functional mechanism of Bt toxins in target insects and the biotransfer and the bioaccumulation of Bt toxins in arthropod food webs in the Bt crop ecosystem.

  3. Central projections of gustatory receptor neurons in the medial and the lateral sensilla styloconica of Helicoverpa armigera larvae.

    Directory of Open Access Journals (Sweden)

    Qing-Bo Tang

    Full Text Available Food selection behavior of lepidopteran larvae is predominantly governed by the activation of taste neurons present in two sensilla styloconica located on the galea of the maxilla. In this study, we present the ultrastructure of the sensilla styloconica and the central projection pattern of their associated receptor neurons in larvae of the heliothine moth, Helicoverpa armigera. By means of light microscopy and scanning electron microscopy, the previous findings of two morphologically fairly similar sensilla comprising a socketed conic tip inserted into a large peg were confirmed. However, the peg size of the medial sensillum was found to be significantly bigger than that of the lateral sensillum. The sensory neurons derived from each sensillum styloconicum were mapped separately using anterograde staining experiments combined with confocal laser-scanning microscopy. For determining the afferents' target regions relative to each other, we reconstructed the labeled axons and placed them into a common reference framework. The sensory axons from both sensilla projected via the ipsilateral maxillary nerve to the suboesophageal ganglion and further through the ipsilateral circumoesophageal connective to the brain. In the suboesophageal ganglion, the sensory projections targeted two areas of the ipsilateral maxillary neuropil, one located in the ventrolateral neuromere and the other adjacent to the neuromere midline. In the brain, the axon terminals targeted the dorso-anterior area of the ipsilateral tritocerebrum. As confirmed by the three-dimensional reconstructions, the target regions of the neural projections originating from each of the two sensilla styloconica were identical.

  4. Central projections of gustatory receptor neurons in the medial and the lateral sensilla styloconica of Helicoverpa armigera larvae.

    Science.gov (United States)

    Tang, Qing-Bo; Zhan, Huan; Cao, Huan; Berg, Bente G; Yan, Feng-Ming; Zhao, Xin-Cheng

    2014-01-01

    Food selection behavior of lepidopteran larvae is predominantly governed by the activation of taste neurons present in two sensilla styloconica located on the galea of the maxilla. In this study, we present the ultrastructure of the sensilla styloconica and the central projection pattern of their associated receptor neurons in larvae of the heliothine moth, Helicoverpa armigera. By means of light microscopy and scanning electron microscopy, the previous findings of two morphologically fairly similar sensilla comprising a socketed conic tip inserted into a large peg were confirmed. However, the peg size of the medial sensillum was found to be significantly bigger than that of the lateral sensillum. The sensory neurons derived from each sensillum styloconicum were mapped separately using anterograde staining experiments combined with confocal laser-scanning microscopy. For determining the afferents' target regions relative to each other, we reconstructed the labeled axons and placed them into a common reference framework. The sensory axons from both sensilla projected via the ipsilateral maxillary nerve to the suboesophageal ganglion and further through the ipsilateral circumoesophageal connective to the brain. In the suboesophageal ganglion, the sensory projections targeted two areas of the ipsilateral maxillary neuropil, one located in the ventrolateral neuromere and the other adjacent to the neuromere midline. In the brain, the axon terminals targeted the dorso-anterior area of the ipsilateral tritocerebrum. As confirmed by the three-dimensional reconstructions, the target regions of the neural projections originating from each of the two sensilla styloconica were identical.

  5. Tarsal taste neuron activity and proboscis extension reflex in response to sugars and amino acids in Helicoverpa armigera (Hubner).

    Science.gov (United States)

    Zhang, Yun-Feng; van Loon, Joop J A; Wang, Chen-Zhu

    2010-08-15

    In adult female Helicoverpa armigera (Hübner), the fifth tarsomere of the prothoracic legs bears 14 gustatory trichoid chemosensilla. These chemosensilla were characterized through electrophysiological experiments by stimulating with sucrose, glucose, fructose, maltose, myo-inositol and 20 common amino acids. In electrophysiological recordings from nine sensilla, responses were obtained to certain compounds tested at 100 mmol l(-1), and the response spectra differed from broad to narrow. The four sugars excited the same receptor neuron in sensillum a and sensillum b; sucrose and myo-inositol, sucrose and lysine, myo-inositol and lysine excited two different receptor neurons respectively in sensillum a; fructose and lysine excited two different receptor neurons in sensillum n. Furthermore, the four sugars, myo-inositol and lysine all elicited concentration-dependent electrophysiological responses. These six compounds also induced the proboscis extension reflex (PER) followed by ingestion of the solution when they were applied on the tarsi. Lysine and sucrose caused the strongest electrophysiological responses. However, sucrose had the strongest stimulatory effect on the PER whereas lysine had the weakest. Mixtures of sucrose with the other sugars or with lysine had a similar stimulatory effect on the PER as sucrose alone. The electrophysiological and behavioural responses caused by a range of sucrose concentrations were positively correlated. We conclude that the tarsal gustatory sensilla play an essential role in perceiving sugars available in floral nectar and provide chemosensory information determining feeding behaviour. Tarsal taste-receptor-neuron responses to lysine are implicated in oviposition behaviour.

  6. Characterization of lepidopteran-specific cry1 and cry2 gene harbouring native Bacillus thuringiensis isolates toxic against Helicoverpa armigera

    Directory of Open Access Journals (Sweden)

    Showkat Ahmad Lone

    2017-09-01

    Full Text Available Bacillus thuringiensis (Bt based biopesticides are feasible alternatives to chemical pesticides. Here, we present the distribution of lepidopteran-specific cry1 and cry2 genes in native B. thuringiensis. Forty four out of 86 colonies were found to harbour crystals by phase contrast microscopy exhibiting a Bt index of 0.51. PCR analysis resulted in the amplification of cry1 in 24 and cry2 in 14 isolates. Twelve of the isolates showed presence of both cry1 and cry2, while 18 isolates did not show presence of either of the genes. Toxicity screening using spore-crystal mixtures against 2nd instar larvae of Helicoverpa armigera revealed that the isolates (50% were either mildly toxic or not toxic (36.36%, and only 13.63% were toxic. The results are interesting, particularly so because the same isolates were previously reported to contain lepidopteran specific vip3A genes also, hence can complement the toxicity of the isolates harbouring vip3A genes.

  7. The seesaw effect of winter temperature change on the recruitment of cotton bollworms Helicoverpa armigera through mismatched phenology.

    Science.gov (United States)

    Reddy, Gadi V P; Shi, Peijian; Hui, Cang; Cheng, Xiaofei; Ouyang, Fang; Ge, Feng

    2015-12-01

    Knowing how climate change affects the population dynamics of insect pests is critical for the future of integrated pest management. Rising winter temperatures from global warming can drive increases in outbreaks of some agricultural pests. In contrast, here we propose an alternative hypothesis that both extremely cold and warm winters can mismatch the timing between the eclosion of overwintering pests and the flowering of key host plants. As host plants normally need higher effective cumulative temperatures for flowering than insects need for eclosion, changes in flowering time will be less dramatic than changes in eclosion time, leading to a mismatch of phenology on either side of the optimal winter temperature. We term this the "seesaw effect." Using a long-term dataset of the Old World cotton bollworm Helicoverpa armigera (Hübner) (Lepidoptera: Noctuidae) in northern China, we tested this seesaw hypothesis by running a generalized additive model for the effects of the third generation moth in the preceding year, the winter air temperature, the number of winter days below a critical temperature and cumulative precipitation during winter on the demography of the overwintering moth. Results confirmed the existence of the seesaw effect of winter temperature change on overwintering populations. Pest management should therefore consider the indirect effect of changing crop phenology (whether due to greenhouse cultivation or to climate change) on pest outbreaks. As arthropods from mid- and high latitudes are actually living in a cooler thermal environment than their physiological optimum in contrast to species from lower latitudes, the effects of rising winter temperatures on the population dynamics of arthropods in the different latitudinal zones should be considered separately. The seesaw effect makes it more difficult to predict the average long-term population dynamics of insect pests at high latitudes due to the potential sharp changes in annual growth rates

  8. Feeding behaviour of helicoverpa armigera HBN (LEP. noctuidae) on tomatoes in greenhouse

    International Nuclear Information System (INIS)

    Saour, G.; Causse, R.

    1998-01-01

    The feeding behaviour of larvae of Helicoverpa arminegera was studied on tomato plants grown in a greenhouse using 32P -labelled caterpillars. When first larvae emerged from eggs deposited onto usual egg-laying sites, they fed on leaves, occasionally onto Inflorescence, and some burrowed into fruit when they reached the third instars. During the fourth and fifth instar, they fed alternately on leaves and fruit, and occasionally on stems. Toward the end of their development, the caterpillars went through a searching phase to look for a shelter for metamorphosis. This typical sequence could be altered and become more complex in relation with the emerging site of the caterpillars. Green fruits of tomato are usually damaged by larvae of at least 7-8 day old which made several entry holes. These entries were not usually followed by feeding, but they nevertheless damaged an average of 2 ± 0.75 fruits. (author). 13 refs., 4 figs

  9. Population genetic structure of the cotton bollworm Helicoverpa armigera (Hübner) (Lepidoptera: Noctuidae) in India as inferred from EPIC-PCR DNA markers.

    Science.gov (United States)

    Behere, Gajanan Tryambak; Tay, Wee Tek; Russell, Derek Alan; Kranthi, Keshav Raj; Batterham, Philip

    2013-01-01

    Helicoverpa armigera is an important pest of cotton and other agricultural crops in the Old World. Its wide host range, high mobility and fecundity, and the ability to adapt and develop resistance against all common groups of insecticides used for its management have exacerbated its pest status. An understanding of the population genetic structure in H. armigera under Indian agricultural conditions will help ascertain gene flow patterns across different agricultural zones. This study inferred the population genetic structure of Indian H. armigera using five Exon-Primed Intron-Crossing (EPIC)-PCR markers. Nested alternative EPIC markers detected moderate null allele frequencies (4.3% to 9.4%) in loci used to infer population genetic structure but the apparently genome-wide heterozygote deficit suggests in-breeding or a Wahlund effect rather than a null allele effect. Population genetic analysis of the 26 populations suggested significant genetic differentiation within India but especially in cotton-feeding populations in the 2006-07 cropping season. In contrast, overall pair-wise F(ST) estimates from populations feeding on food crops indicated no significant population substructure irrespective of cropping seasons. A Baysian cluster analysis was used to assign the genetic make-up of individuals to likely membership of population clusters. Some evidence was found for four major clusters with individuals in two populations from cotton in one year (from two populations in northern India) showing especially high homogeneity. Taken as a whole, this study found evidence of population substructure at host crop, temporal and spatial levels in Indian H. armigera, without, however, a clear biological rationale for these structures being evident.

  10. Toxicidade e capacidade de ligação de proteínas Cry1 a receptores intestinais de Helicoverpa armigera (Lepidoptera: Noctuidae

    Directory of Open Access Journals (Sweden)

    Isis Sebastião

    2015-11-01

    Full Text Available Resumo: O objetivo deste trabalho foi avaliar a toxicidade e a capacidade de ligação das proteínas Cry1Aa, Cry1Ab, Cry1Ac e Cry1Ca, de Bacillus thuringiensis, a receptores intestinais de Helicoverpa armigera. Realizou-se análise de ligação das proteínas ativadas às vesículas de membrana da microvilosidade apical (VMMA do intestino médio deH. armigera, além de ensaios de competição heteróloga para avaliar sua capacidade de ligação. Cry1Ac destacou-se como a proteína mais tóxica, seguida por Cry1Ab e Cry1Aa. A proteína Cry1Ca não foi tóxica às lagartas e, portanto, não foi possível determinar os seus parâmetros de toxicidade CL50 e CL90. As proteínas Cry1Aa, Cry1Ab e Cry1Ac são capazes de se ligar a um mesmo receptor nas membranas intestinais, o que aumenta o risco do desenvolvimento de resistência cruzada. Portanto, a utilização conjunta dessas proteínas deve ser evitada.

  11. Response of successive three generations of cotton bollworm, Helicoverpa armigera (Hübner), fed on cotton bolls, under elevated CO2

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The growth, development and consumption of successive three generations of cotton bollworm, Helicoverpa armigera (Hübner), fed on cotton bolls grown under elevated CO2 (double-ambient vs. ambient) in open-top chambers were examined. Significant decreases in protein, total amino acid, water and nitrogen content and increases in free fatty acid were observed in cotton bolls. Changes in quality of cotton bolls affected the growth, development and food utilization of H. armigera. Significantly longer larval development duration in three successive generations and lower pupal weight of the second and third generations were observed in cotton bollworm fed on cotton bolls grown under elevated CO2. Significantly lower fecundity was also found in successive three generations of H. armigera fed on cotton bolls grown under elevated CO2. The consumption per larva occurred significant increase in successive three generations and frass per larva were also significantly increased during the second and third generations under elevated CO2. Significantly lower relative growth rate, efficiency of conversion of ingested food and significant higher relative consumption rate in successive three generations were observed in cotton bollworm fed on cotton bolls grown under elevated CO2. Significantly lower potential female fecundity, larval numbers and population consumption were found in the second and third generations of cotton bollworm fed on cotton bolls grown under elevated CO2. The integrative effect of higher larval mortality rate and lower adult fecundity resulted in significant decreases in potential population consumption in the latter two generations. The results show that elevated CO2 adversely affects cotton bolls quality, which indicates the potential population dynamics and potential population consumption of cotton bollworm will alleviate the harm to the plants in the future rising CO2 atmosphere.

  12. Characterization of a digestive carboxypeptidase from the insect pest corn earworm (Helicoverpa armigera) with novel specificity towards C-terminal glutamate residues.

    Science.gov (United States)

    Bown, David P; Gatehouse, John A

    2004-05-01

    Carboxypeptidases were purified from guts of larvae of corn earworm (Helicoverpa armigera), a lepidopteran crop pest, by affinity chromatography on immobilized potato carboxypeptidase inhibitor, and characterized by N-terminal sequencing. A larval gut cDNA library was screened using probes based on these protein sequences. cDNA HaCA42 encoded a carboxypeptidase with sequence similarity to enzymes of clan MC [Barrett, A. J., Rawlings, N. D. & Woessner, J. F. (1998) Handbook of Proteolytic Enzymes. Academic Press, London.], but with a novel predicted specificity towards C-terminal acidic residues. This carboxypeptidase was expressed as a recombinant proprotein in the yeast Pichia pastoris. The expressed protein could be activated by treatment with bovine trypsin; degradation of bound pro-region, rather than cleavage of pro-region from mature protein, was the rate-limiting step in activation. Activated HaCA42 carboxypeptidase hydrolysed a synthetic substrate for glutamate carboxypeptidases (FAEE, C-terminal Glu), but did not hydrolyse substrates for carboxypeptidase A or B (FAPP or FAAK, C-terminal Phe or Lys) or methotrexate, cleaved by clan MH glutamate carboxypeptidases. The enzyme was highly specific for C-terminal glutamate in peptide substrates, with slow hydrolysis of C-terminal aspartate also observed. Glutamate carboxypeptidase activity was present in larval gut extract from H. armigera. The HaCA42 protein is the first glutamate-specific metallocarboxypeptidase from clan MC to be identified and characterized. The genome of Drosophila melanogaster contains genes encoding enzymes with similar sequences and predicted specificity, and a cDNA encoding a similar enzyme has been isolated from gut tissue in tsetse fly. We suggest that digestive carboxypeptidases with sequence similarity to the classical mammalian enzymes, but with specificity towards C-terminal glutamate, are widely distributed in insects.

  13. Expression of a Chimeric Gene Encoding Insecticidal Crystal Protein Cry1Aabc of Bacillus thuringiensis in Chickpea (Cicer arietinum L.) Confers Resistance to Gram Pod Borer (Helicoverpa armigera Hubner.).

    Science.gov (United States)

    Das, Alok; Datta, Subhojit; Thakur, Shallu; Shukla, Alok; Ansari, Jamal; Sujayanand, G K; Chaturvedi, Sushil K; Kumar, P A; Singh, N P

    2017-01-01

    Domain swapping and generation of chimeric insecticidal crystal protein is an emerging area of insect pest management. The lepidopteran insect pest, gram pod borer ( Helicoverpa armigera H.) wreaks havoc to chickpea crop affecting production. Lepidopteran insects were reported to be controlled by Bt ( cryI ) genes. We designed a plant codon optimized chimeric Bt gene ( cry1Aabc ) using three domains from three different cry1A genes (domains I, II, and III from cry1Aa , cry1Ab , and cry1Ac , respectively) and expressed it under the control of a constitutive promoter in chickpea ( cv . DCP92-3) to assess its effect on gram pod borer. A total of six transgenic chickpea shoots were established by grafting into mature fertile plants. The in vitro regenerated (organogenetic) shoots were selected based on antibiotic kanamycin monosulfate (100 mg/L) with transformation efficiency of 0.076%. Three transgenic events were extensively studied based on gene expression pattern and insect mortality across generations. Protein expression in pod walls, immature seeds and leaves (pre- and post-flowering) were estimated and expression in pre-flowering stage was found higher than that of post-flowering. Analysis for the stable integration, expression and insect mortality (detached leaf and whole plant bioassay) led to identification of efficacious transgenic chickpea lines. The chimeric cry1Aabc expressed in chickpea is effective against gram pod borer and generated events can be utilized in transgenic breeding program.

  14. Expression of a Chimeric Gene Encoding Insecticidal Crystal Protein Cry1Aabc of Bacillus thuringiensis in Chickpea (Cicer arietinum L. Confers Resistance to Gram Pod Borer (Helicoverpa armigera Hubner.

    Directory of Open Access Journals (Sweden)

    Alok Das

    2017-08-01

    Full Text Available Domain swapping and generation of chimeric insecticidal crystal protein is an emerging area of insect pest management. The lepidopteran insect pest, gram pod borer (Helicoverpa armigera H. wreaks havoc to chickpea crop affecting production. Lepidopteran insects were reported to be controlled by Bt (cryI genes. We designed a plant codon optimized chimeric Bt gene (cry1Aabc using three domains from three different cry1A genes (domains I, II, and III from cry1Aa, cry1Ab, and cry1Ac, respectively and expressed it under the control of a constitutive promoter in chickpea (cv. DCP92-3 to assess its effect on gram pod borer. A total of six transgenic chickpea shoots were established by grafting into mature fertile plants. The in vitro regenerated (organogenetic shoots were selected based on antibiotic kanamycin monosulfate (100 mg/L with transformation efficiency of 0.076%. Three transgenic events were extensively studied based on gene expression pattern and insect mortality across generations. Protein expression in pod walls, immature seeds and leaves (pre- and post-flowering were estimated and expression in pre-flowering stage was found higher than that of post-flowering. Analysis for the stable integration, expression and insect mortality (detached leaf and whole plant bioassay led to identification of efficacious transgenic chickpea lines. The chimeric cry1Aabc expressed in chickpea is effective against gram pod borer and generated events can be utilized in transgenic breeding program.

  15. Trans-generational desensitization and within-generational resensitization of a sucrose-best neuron in the polyphagous herbivore Helicoverpa armigera (Lepidoptera: Noctuidae).

    Science.gov (United States)

    Ma, Ying; Li, Jingjing; Tang, Qingbo; Zhang, Xuening; Zhao, Xincheng; Yan, Fengming; van Loon, Joop J A

    2016-12-14

    Dietary exposure of insects to a feeding deterrent substance for hours to days can induce habituation and concomitant desensitization of the response of peripheral gustatory neurons to such a substance. In the present study, larvae of the herbivore Helicoverpa armigera were fed on diets containing either a high, medium or low concentration of sucrose, a major feeding stimulant. The responsiveness of the sucrose-best neuron in the lateral sensilla styloconica on the galea was quantified. Results showed the response of the sucrose-best neuron exposed to high-sucrose diets decreased gradually over successive generations, resulting in complete desensitization in the 5 th and subsequent generations. However, the sensitivity was completely restored in the ninth generation after neonate larvae were exposed to low-sucrose diet. These findings demonstrate phenotypic plasticity and exclude inadvertent artificial selection for low sensitivity to sucrose. No significant changes were found in the sensitivity of caterpillars which experienced low- or medium-sucrose diets over the same generations. Such desensitization versus re-sensitization did not generalise to the phagosimulant myo-inositol-sensitive neuron or the feeding deterrent-sensitive neuron. Our results demonstrate that under conditions of high sucrose availability trans-generational desensitization of a neuron sensitive to this feeding stimulant becomes more pronounced whereas re-sensitization occurs within one generation.

  16. Azadirachtin-A and tetrahydroazadirachtin-A concentrates: preparation, LC-MS characterization and insect antifeedant/IGR activity against Helicoverpa armigera (Hübner).

    Science.gov (United States)

    Sharma, Vandana; Walia, Suresh; Dhingra, Swaran; Kumar, Jitendra; Parmar, Balraj S

    2006-10-01

    A 60% azadirachtin-A concentrate has been obtained through repeated precipitation with hexane from a methanolic solution of a 20% concentrate. Azadirachtin-A (90%) has been obtained by medium-pressure liquid chromatography of the 60% concentrate with an RP-18 column and a methanol + water (1 + 1 by volume) solvent system. Catalytic hydrogenation of the 60 and 90% azadirachtin concentrates yielded the corresponding tetrahydroazadirachtin concentrates. Dihydroazadirachtin and tetrahydroazadirachtin formed during the first 5 h of hydrogenation were identified by LC-ESI-MS on the basis of their unique mass fragmentation pattern. The efficacy of tetrahydroazadirachtin concentrates in inhibiting the feeding and growth of Helicoverpa armigera (Hübner) larvae has been compared with that of azadirachtin concentrates. They were in general more active and deterred larvae from feeding at all concentrations. Tetrahydroazadirachtin-A (90%) and azadirachtin-A (90%) with respective IC(50) values of 280 and 390 mg L(-1) were effective as insect growth regulators, while tetrahydroazadirachtin-A (90%) displayed higher antifeedant activity (AI(50) 14 mg L(-1)) against the test insect.

  17. No evidence for change in oviposition behaviour of Helicoverpa armigera (Hübner) (Lepidoptera: Noctuidae) after widespread adoption of transgenic insecticidal cotton.

    Science.gov (United States)

    Zalucki, M P; Cunningham, J P; Downes, S; Ward, P; Lange, C; Meissle, M; Schellhorn, N A; Zalucki, J M

    2012-08-01

    Cotton growing landscapes in Australia have been dominated by dual-toxin transgenic Bt varieties since 2004. The cotton crop has thus effectively become a sink for the main target pest, Helicoverpa armigera. Theory predicts that there should be strong selection on female moths to avoid laying on such plants. We assessed oviposition, collected from two cotton-growing regions, by female moths when given a choice of tobacco, cotton and cabbage. Earlier work in the 1980s and 1990s on populations from the same geographic locations indicated these hosts were on average ranked as high, mid and low preference plants, respectively, and that host rankings had a heritable component. In the present study, we found no change in the relative ranking of hosts by females, with most eggs being laid on tobacco, then cotton and least on cabbage. As in earlier work, some females laid most eggs on cotton and aspects of oviposition behaviour had a heritable component. Certainly, cotton is not avoided as a host, and the implications of these finding for managing resistance to Bt cotton are discussed.

  18. Determinant Factors in the Production of a Co-Occluded Binary Mixture of Helicoverpa armigera Alphabaculovirus (HearNPV) Genotypes with Desirable Insecticidal Characteristics

    Science.gov (United States)

    Arrizubieta, Maite; Simón, Oihane; Williams, Trevor; Caballero, Primitivo

    2016-01-01

    A co-occluded binary mixture of Helicoverpa armigera nucleopolyhedrovirus genotypes HearSP1B and HearLB6 at a 1:1 ratio (HearSP1B+HearLB6) was selected for the development of a virus-based biological insecticide, which requires an efficient large-scale production system. In vivo production systems require optimization studies in each host-virus pathosystem. In the present study, the effects of larval instar, rearing density, timing of inoculation, inoculum concentration and temperature on the production of HearSP1B+HearLB6 in its homologous host were evaluated. The high prevalence of cannibalism in infected larvae (40–87%) indicated that insects require individual rearing to avoid major losses in OB production. The OB production of recently molted fifth instars (7.0 x 109 OBs/larva), combined with a high prevalence of mortality (85.7%), resulted in the highest overall OB yield (6.0 x 1011 OBs/100 inoculated larvae), compared to those of third or fourth instars. However, as inoculum concentration did not influence final OB yield, the lowest concentration, LC80 (5.5 x 106 OBs/ml), was selected. Incubation temperature did not significantly influence OB yield, although larvae maintained at 30°C died 13 and 34 hours earlier than those incubated at 26°C and 23°C, respectively. We conclude that the efficient production of HearSP1B+HearLB6 OBs involves inoculation of recently molted fifth instars with a LC80 concentration of OBs followed by individual rearing at 30°C. PMID:27732657

  19. The Use of F2 Screening for Detection of Resistance to Emamectin Benzoate, Chlorantraniliprole, and Indoxacarb in Australian Populations of Helicoverpa armigera (Lepidoptera: Noctuidae).

    Science.gov (United States)

    Bird, L J; Drynan, L J; Walker, P W

    2017-04-01

    The ability to effectively detect changes in susceptibility to insecticides is an integral component of resistance management strategies and is highly dependent upon precision of methods deployed. Between 2013 and 2016, F2 screens were performed for detection of resistance alleles in Helicoverpa armigera (Hübner) to emamectin benzoate, chlorantraniliprole, and indoxacarb in major cropping regions of eastern Australia. Resistance to emamectin benzoate was not detected. There were low but detectable levels of survival at discriminating concentrations of chlorantraniliprole and indoxacarb. Alleles conferring an advantage to chlorantraniliprole were present at a frequency of 0.0027 (95% CI 0.0012-0.0064; n = 1,817). Alleles conferring an advantage to indoxacarb were present at a frequency of 0.027 (95% CI 0.020-0.035; n = 1,863). Complementation tests for allelism in six of seven positive indoxacarb tests indicated that resistance was due to alleles present at the same locus. The majority (88%) of lines that tested positive for indoxacarb resistance deviated from a model of recessive inheritance. Pheromone-caught male moths contributed significantly greater numbers of F2 lines compared with moths derived from field-collected eggs or larvae. There was no difference in the detectability of indoxacarb resistance in F2 lines from pheromone-caught moths compared with moths derived from immature stages collected from the field and reared to adult under laboratory conditions. Therefore, we recommend the use of pheromone traps for sourcing insects for F2 screening as a more cost- and time-efficient alternative to traditional methods of sampling. © The Authors 2017. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  20. An independent occurrence of the chimeric P450 enzyme CYP337B3 of Helicoverpa armigera confers cypermethrin resistance in Pakistan.

    Science.gov (United States)

    Rasool, Akhtar; Joußen, Nicole; Lorenz, Sybille; Ellinger, Renate; Schneider, Bernd; Khan, Sher Afzal; Ashfaq, Muhammad; Heckel, David G

    2014-10-01

    The increasing resistance level of insect pest species is a major concern to agriculture worldwide. The cotton bollworm, Helicoverpa armigera, is one of the most important pest species due to being highly polyphagous, geographically widespread, and resistant towards many chemical classes of insecticides. We previously described the mechanism of fenvalerate resistance in Australian populations conferred by the chimeric cytochrome P450 monooxygenase CYP337B3, which arose by unequal crossing-over between CYP337B1 and CYP337B2. Here, we show that this mechanism is also present in the cypermethrin-resistant FSD strain from Pakistan. The Pakistani and the Australian CYP337B3 alleles differ by 18 synonymous and three nonsynonymous SNPs and additionally in the length and sequence of the intron. Nevertheless, the activity of both CYP337B3 proteins is comparable. We demonstrate that CYP337B3 is capable of metabolizing cypermethrin (trans- and especially cis-isomers) to the main metabolite 4'-hydroxycypermethrin, which exhibits no intrinsic toxicity towards susceptible larvae. In a bioassay, CYP337B3 confers a 7-fold resistance towards cypermethrin in FSD larvae compared to susceptible larvae from the Australian TWB strain lacking CYP337B3. Linkage analysis shows that presence of CYP337B3 accounts for most of the cypermethrin resistance in the FSD strain; up-regulation of other P450s in FSD plays no detectable role in resistance. The presence or absence of CYP337B3 can be easily detected by a simple PCR screen, providing a powerful tool to rapidly distinguish resistant from susceptible individuals in the field and to determine the geographical distribution of this resistance gene. Our results suggest that CYP337B3 evolved twice independently by unequal crossing-over between CYP337B2 and two different CYP337B1 alleles. Copyright © 2014 Elsevier Ltd. All rights reserved.

  1. Análise da variabilidade genética de populações de Helicoverpa armigera (Lepidoptera: Noctuidae) ocorrendo em culturas de algodão e tomate - doi: 10.5102/ucs.v8i1.1056

    OpenAIRE

    Queiroz, Paulo Roberto; Lima, Luzia Helena Corrêa

    2010-01-01

    Helicoverpa armigera é uma das principais pragas polífagas de distribuição mundial das culturas de interesse econômico. A identificação dessa espécie por meio molecular auxilia no estabelecimento do perfil genético, na caracterização e no monitoramento das populações desse inseto da ordem Lepidoptera. O objetivo desse trabalho foi estabelecer uma metodologia de extração de DNA para H. armigera, determinar perfis eletroforéticos e analisar a variabilidade genética entre as populações desse ins...

  2. Identificação morfológica e molecular de Helicoverpa armigera (Lepidoptera: Noctuidae e ampliação de seu registro de ocorrência no Brasil

    Directory of Open Access Journals (Sweden)

    Alexandre Specht

    2013-06-01

    Full Text Available O objetivo deste trabalho foi descrever métodos para a caracterização morfológica e molecular de Helicoverpa armigera e ampliar o registro de ocorrência da praga no Brasil. As mariposas foram obtidas de lagartas coletadas nas culturas de algodão, milho e soja, com uso de armadilhas luminosas. As coletas foram realizadas na Bahia, no Distrito Federal, no Mato Grosso e no Paraná. A identificação foi baseada na genitália masculina e nas análises das sequências dos genes mitocondriais do citocromo B e da região cox1-tRNALeu-cox2. A genitália masculina foi comparada com as descrições morfológicas na literatura, e as sequências de genes, com as depositadas no GenBank. Ambas as análises confirmaram a presença de H. armigera nos locais de coleta. Ampliou-se o registro de ocorrência da praga para a região Sul do país.

  3. Inheritance of electrophysiological responses to leaf saps of host- and nonhost plants in two helicoverpa species and their hybrids

    NARCIS (Netherlands)

    Tang, Q.B.; Huang, L.Q.; Wang, C.Z.; Tang, Q.B.T.; Zhan, H.; Loon, van J.J.A.

    2014-01-01

    The polyphagous cotton bollworm Helicoverpa armigera (Hubner) and the oligophagous oriental tobacco budworm Helicoverpa assulta (Guenee) (Lepidoptera: Noctuidae) display contrasting heritable feeding preferences for cotton and pepper leaves. In this study, electrophysiological response patterns to

  4. Análise da variabilidade genética de populações de Helicoverpa armigera (Lepidoptera: Noctuidae ocorrendo em culturas de algodão e tomate - doi: 10.5102/ucs.v8i1.1056

    Directory of Open Access Journals (Sweden)

    Paulo Roberto Queiroz

    2010-10-01

    Full Text Available Helicoverpa armigera é uma das principais pragas polífagas de distribuição mundial das culturas de interesse econômico. A identificação dessa espécie por meio molecular auxilia no estabelecimento do perfil genético, na caracterização e no monitoramento das populações desse inseto da ordem Lepidoptera. O objetivo desse trabalho foi estabelecer uma metodologia de extração de DNA para H. armigera, determinar perfis eletroforéticos e analisar a variabilidade genética entre as populações desse inseto-praga. Os cinco iniciadores de RAPD produziram fragmentos de DNA que revelaram uma similaridade genética inferior a 80% entre as dez populações no dendrograma que foi gerado. Os resultados obtidos com as análises de variância molecular (AMOVA revelaram que a elevada fonte de variação genética foi o resultado da variabilidade dentro de cada população. As causas que levaram a essa elevada variabilidade precisam ser mais bem estudadas nos países onde a praga ocorre.

  5. Genomic innovations, transcriptional plasticity and gene loss underlying the evolution and divergence of two highly polyphagous and invasive Helicoverpa pest species

    DEFF Research Database (Denmark)

    Pearce, S L; Clarke, D F; East, P D

    2017-01-01

    BACKGROUND: Helicoverpa armigera and Helicoverpa zea are major caterpillar pests of Old and New World agriculture, respectively. Both, particularly H. armigera, are extremely polyphagous, and H. armigera has developed resistance to many insecticides. Here we use comparative genomics, transcriptom......BACKGROUND: Helicoverpa armigera and Helicoverpa zea are major caterpillar pests of Old and New World agriculture, respectively. Both, particularly H. armigera, are extremely polyphagous, and H. armigera has developed resistance to many insecticides. Here we use comparative genomics......, transcriptomics and resequencing to elucidate the genetic basis for their properties as pests. RESULTS: We find that, prior to their divergence about 1.5 Mya, the H. armigera/H. zea lineage had accumulated up to more than 100 more members of specific detoxification and digestion gene families and more than 100...... lacks certain genes and alleles conferring insecticide resistance found in H. armigera. Non-synonymous sites in the expanded gene families above are rapidly diverging, both between paralogues and between orthologues in the two species. Whole genome transcriptomic analyses of H. armigera larvae show...

  6. Effects of temperature and nonionizing ultraviolet radiation treatments of eggs of five host insects on production of Trichogramma chilonis Ishii (Hymenoptera: Trichogrammatidae) for biological control applications.

    Science.gov (United States)

    Trichogramma are used worldwide as biological control against insect pests, attacking eggs of over 200 species. Eggs of Spodoptera litura, Corcyra cephalonica, Plutella xylostella and Helicoverpa armigera were tested to consider the effect of temperature and radiation on parasitization, emergence of...

  7. The influence of the temperature at the intensity of the spread of the cotton bollworm (heliothis obsoleta fabr. = helicoverpa armigera hb.) as a pest of the peppers in the Strumica region

    OpenAIRE

    Spasov, Dusan; Spasova, Dragica; Ilievski, Mite; Atanasova, Biljana

    2015-01-01

    H. armigera is typical polyphagous insect which attacks: tomatoes, peppers, tobacco, maize, cotton, garlic, onions, cabbage, soy, beans and many other leguminous and pumpkin crops and various weed plants. The damages from the cotton bollworm have economic importance, especially when the species is in progradation. It is widespread all over the world, especially in warmer climates. The increase in the population of this cotton bollworm is associated with global warming.

  8. Binding site alteration is responsible for field-isolated resistance to Bacillus thuringiensis Cry2A insecticidal proteins in two Helicoverpa species.

    Directory of Open Access Journals (Sweden)

    Silvia Caccia

    Full Text Available BACKGROUND: Evolution of resistance by target pests is the main threat to the long-term efficacy of crops expressing Bacillus thuringiensis (Bt insecticidal proteins. Cry2 proteins play a pivotal role in current Bt spray formulations and transgenic crops and they complement Cry1A proteins because of their different mode of action. Their presence is critical in the control of those lepidopteran species, such as Helicoverpa spp., which are not highly susceptible to Cry1A proteins. In Australia, a transgenic variety of cotton expressing Cry1Ac and Cry2Ab (Bollgard II comprises at least 80% of the total cotton area. Prior to the widespread adoption of Bollgard II, the frequency of alleles conferring resistance to Cry2Ab in field populations of Helicoverpa armigera and Helicoverpa punctigera was significantly higher than anticipated. Colonies established from survivors of F(2 screens against Cry2Ab are highly resistant to this toxin, but susceptible to Cry1Ac. METHODOLOGY/PRINCIPAL FINDINGS: Bioassays performed with surface-treated artificial diet on neonates of H. armigera and H. punctigera showed that Cry2Ab resistant insects were cross-resistant to Cry2Ae while susceptible to Cry1Ab. Binding analyses with (125I-labeled Cry2Ab were performed with brush border membrane vesicles from midguts of Cry2Ab susceptible and resistant insects. The results of the binding analyses correlated with bioassay data and demonstrated that resistant insects exhibited greatly reduced binding of Cry2Ab toxin to midgut receptors, whereas no change in (125I-labeled-Cry1Ac binding was detected. As previously demonstrated for H. armigera, Cry2Ab binding sites in H. punctigera were shown to be shared by Cry2Ae, which explains why an alteration of the shared binding site would lead to cross-resistance between the two Cry2A toxins. CONCLUSION/SIGNIFICANCE: This is the first time that a mechanism of resistance to the Cry2 class of insecticidal proteins has been reported

  9. EVALUATION OF FOUR INTEGRATED PEST MANAGEMENT PACKAGES FOR CONTROLLING MAIN PESTS OF COTTON IN RAINFED FIELDS

    OpenAIRE

    Nurindah Nurindah; Dwi Adi Sunarto

    2014-01-01

    Cotton production nationally is low due to various constraints, including pests. Two main pests commonly found in cotton plantation in rain fed fields are cotton leafhopper (Amrasca biguttula) and cotton bollworm (Helicoverpa armigera). The study aimed to evaluate four packages of integrated pest management (IPM) techniques to control cotton leafhopper and cotton bollworm in rain fed fields. The experiment was conducted in farmers’ fields at Asembagus, East Java, between January and July 2012...

  10. Radiation induced F1 sterility in Helicoverpa zea (Boddie): Potential for area-wide control

    International Nuclear Information System (INIS)

    Carpenter, J.E.

    1993-01-01

    The potential of using F 1 sterility as a management strategy for the corn earworm (CEW), Helicoverpa zea (Boddie), has been revealed through laboratory and field investigations. A 100 Gy dose of radiation induced deleterious effects in CEWs' which were inherited through several generations. Irradiated, laboratory reared CEWs were competitive with non-irradiated, laboratory reared CEWs in attracting and securing mates under field conditions. Females that mated to non-irradiated males and males irradiated with 100 Gy had the same mating propensity and the same intermating interval. Although there was a difference in mortality between larvae from irradiated and non-irradiated parents when reared in the laboratory, this mortality differential was reduced when larvae were reared under natural conditions in the field. Other studies revealed that there was no interaction between inherited sterility and diapause in CEWs when depth of pupation, initiation and termination of diapause, egg hatch, fecundity or survival were investigated. A pilot test that investigated the efficacy of using inherited sterility for suppressing seasonal population increases of CEWs was conducted from 1988 to 1990. Results of the pilot test revealed that irradiated (100 Gy) males released in mountain valleys were competitive with wild males in infusing their genes into the wild population. Analysis of seasonal population curves of wild CEW males calculated from mark-recapture data suggested that seasonal increases in wild CEW males were delayed or reduced in valleys where irradiated males were released. (author). 19 refs, 3 figs

  11. Microbial agents against Helicoverpa armigera: Where are we and ...

    African Journals Online (AJOL)

    SAM

    2014-04-30

    Apr 30, 2014 ... feed and fibre around the world. Different approaches namely: .... biocontrol agent from the fungus Trichoderma harzianum was also evaluated .... the antibiotic biosynthetic gene transfer (Baltz, 2005). Overall 23,000 bioactive ...

  12. Intraguild interactions and behavior of Spodoptera frugiperda and Helicoverpa spp. on maize.

    Science.gov (United States)

    Bentivenha, José Pf; Montezano, Débora G; Hunt, Thomas E; Baldin, Edson Ll; Peterson, Julie A; Victor, Vinícius S; Pannuti, Luiz Er; Vélez, Ana M; Paula-Moraes, Silvana V

    2017-11-01

    Spodoptera frugiperda (J.E. Smith) (Lepidoptera: Noctuidae) is one of the major pests of maize and is in the same feeding guild as the noctuid pests Helicoverpa zea (Boddie) and Helicoverpa armigera (Hübner), recently reported in South and North America. The intraguild interactions of these species were assessed in laboratory and field conditions by determining the survival of larvae in interaction scenarios with non-Bt maize silks and ears. Moreover, a video tracking system was utilized to evaluate behavioral parameters during larval interactions in scenarios with or without food. In intraguild interactions, S. frugiperda had greater survival (55-100%) when competing with Helicoverpa spp. in scenarios where larvae were the same instar or when they were larger (fourth versus second) than their competitor. Frequency and time in food of S. frugiperda larvae were negatively influenced by interactions. Larvae of S. frugiperda moved shorter distances (less than 183.03 cm) compared with H. zea. Overall, S. frugiperda had a competitive advantage over Helicoverpa spp. This study provides significant information regarding noctuid behavior and larval survival during intraguild interactions, which may impact pest prevalence and population dynamics, thereby affecting integrated pest management and insect resistance management of these species in maize. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  13. Recent advances of rearing cabinet instrumentation and control system for insect stock culture

    Science.gov (United States)

    Hermawan, Wawan; Kasmara, Hikmat; Melanie, Panatarani, Camellia; Joni, I. Made

    2017-01-01

    Helicoverpa armigera (Hubner) is one of a serious pest of horticulture in Indonesia. Helicoverpa armigera Nuclear Polyhedrovirus (HaNPV) has attracted interest for many researchers as a pest control for larvae of this species. Currently, we investigating the agrochemical formulations of HaNPV by introducing nanotechnology. Thus it is required an acceptable efficiency of insect stock cultures equipped with advance instruments to resolve the difficulties on insect stock seasons dependency. In addition, it is important to improve the insect survival with the aid of artificial natural environment and gain high insect production. This paper reports the rearing cabinet used as preparation of stock culture includes air-conditioning system, lighting, i.e. day and night control, and the main principles on recent technical and procedural advances apparatus of the system. The rearing system was moveable, designed and build by allowing air-conditioned cabinet for rearing insects, air motion and distribution as well as temperature and humidity being precisely controlled. The air was heated, humidified, and dehumidified respectively using a heater and ultrasonic nebulizer as actuators. Temperature and humidity can be controlled at any desired levels from room temperature (20°C) to 40 ± 1°C and from 0 to 80% RH with an accuracy of ±3% R.H. It is concluded that the recent design has acceptable performance based on the defined requirement for insect rearing and storage.

  14. Impacts on transfer of the sperm of helicoverpa Armigera by irradiation (L. noctuidae)

    International Nuclear Information System (INIS)

    Liu Xiaohui; Li Yongjun; Wang Huasong; Song Jiaxiang

    2001-01-01

    Gamma irradiation did not influence the quantity of the eupyrene sperm bundles in duplex and that of the eupyrene sperm in spermatophore, but affected the maturing of eupyrene sperm bundles. When males were given sterilizing dose of 400 Gy, the quantity and the activity of the eupyrene sperm in the spermatheca were reduced significantly (P < 0.05)

  15. Sterilization of Helicoverpa armigera (hubner) moth (lepidoptera; Noctudae) by using Gamma rays radiation

    International Nuclear Information System (INIS)

    Subiyakto; Wari D Astati; Sunarto Dwi A

    1998-01-01

    This experiment was conducted at the Radiation Facility, National Atomic Energy, Jakarta and Entomology Laboratory of the Research Institute for Tobacco and Crops Malang in 1991. Sterilization of moth by radiating insect on pupae stage. The dosage were 0 (unradiated), 1,3,5,7,9,11,13,and 15 krad. The treatments were arranged in complete randomized design with three replications. Each treatments were made variation of copulation (1) two females radiated with a make unradiated (2) two females unradiated with a male radiated, and (3) two females radiated with a male radiated. The results showed that sub sterile dosage (LD 50 ) for male was 0.94 krad and 7.02 krad for female. The sterile dosage (LD 95 ) for male was 10.85 krad and 14.35 krad for female. Research of the competition for copulation between the male radiated and unradiated is needed. (author)

  16. Mass rearing and augmentative biological control evaluation of Rhynocoris fuscipes (Hemiptera: Reduviidae) against multiple pests of cotton.

    Science.gov (United States)

    Tomson, Majesh; Sahayaraj, Kitherian; Kumar, Vivek; Avery, Pasco B; McKenzie, Cindy L; Osborne, Lance S

    2017-08-01

    Rhynocoris fuscipes (Fab.) (Hemiptera: Reduviidae) is a generalist predator of cotton pests and is commonly found inhabiting cotton-growing regions in southern India. With the goal of integrating this predator in standard management practices used against cotton pests on a commercial scale, (1) we developed a protocol for adult group rearing of this predator inside micro-environmental cages (MECs), and (2) we evaluated the biocontrol potential of mass-produced predators against cotton pests under potted and field conditions. Higher fecundity and adult longevity of R. fuscipes was recorded in the MECs than under natural growing conditions. The reduviid predator preferred stones and fallen leaves as hiding places in the MECs. The predator showed a higher biocontrol potential during the night hours against two pests, Phenacoccus solenopsis Tinsley and Dysdercus cingulatus (Fab.), than during the day under potted conditions. Under field conditions, R. fuscipes significantly reduced the population of Aphis gossypii Glover, P. solenopsis, D. cingulatus and Helicoverpa armigera (Hübner) by 28, 70, 29 and 50%, respectively. No negative impact of R. fuscipes was reported on other natural enemies present in the cotton agroecosystem. Significantly higher crop yield and cost benefit ratio were observed in R. fuscipes-released plots than in the control plots. The results suggest that R. fuscipes can be mass produced efficiently under controlled conditions in MECs, and used in an integrated management program for multiple cotton pests. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  17. Microbial control of phytophagous invertebrate pests in South Africa: Current status and future prospects.

    Science.gov (United States)

    Hatting, Justin L; Moore, Sean D; Malan, Antoinette P

    2018-02-07

    Invertebrate pests pose a significant threat to food security on the African continent. In response, South Africa has become one of the largest importers of chemical pesticides in sub-Saharan Africa, with several hundred active ingredients registered. To address the over-reliance on such chemicals, the South African Department of Agriculture, Forestry and Fisheries (DAFF) has eliminated or restricted several pesticides since the late 1970s. The recent launch of the South African National Bio-Economy Strategy and establishment of the South African Bioproducts Organisation (SABO), together with new guidelines for registration of biopesticides in 2015, also support this endeavour. Concurrently, entomopathogen-related research and bioproduct development has increased over the past decade. Currently, 31 products (seven manufactured locally) are registered under the Fertilizers, Farm Feeds, Agricultural Remedies and Stock Remedies Act 36 of 1947. Commercially important microbes include Beauveria bassiana (Cordycipitaceae), Metarhizium anisopliae (Clavicipitaceae), Cydia pomonella granulovirus, Cryptophlebia leucotreta granulovirus, Helicoverpa armigera nucleopolyhedrovirus (Baculoviridae) and Bacillus thuringiensis subsp. kurstaki and B. thuringiensis subsp. aizawai (Bacillaceae). Both parasitic and entomopathogenic nematodes (EPNs) show potential for development as bioinsecticides with one commercial EPN product, based on Heterorhabditis bacteriophora (Heterorhabditidae), registered under the Act. Rapid scientific progression, supported by a favourable legislative environment, should facilitate further advances in microbial control of phytophagous invertebrate pests in South Africa. Copyright © 2018 Elsevier Inc. All rights reserved.

  18. Structure and transcription of the Helicoverpa armigera densovirus (HaDV2) genome and its expression strategy in LD652 cells.

    Science.gov (United States)

    Xu, Pengjun; Graham, Robert I; Wilson, Kenneth; Wu, Kongming

    2017-02-07

    Densoviruses (DVs) are highly pathogenic to their hosts. However, we previously reported a mutualistic DV (HaDV2). Very little was known about the characteristics of this virus, so herein we undertook a series of experiments to explore the molecular biology of HaDV2 further. Phylogenetic analysis showed that HaDV2 was similar to members of the genus Iteradensovirus. However, compared to current members of the genus Iteradensovirus, the sequence identity of HaDV2 is less than 44% at the nucleotide-level, and lower than 36, 28 and 19% at the amino-acid-level of VP, NS1 and NS2 proteins, respectively. Moreover, NS1 and NS2 proteins from HaDV2 were smaller than those from other iteradensoviruses due to their shorter N-terminal sequences. Two transcripts of about 2.2 kb coding for the NS proteins and the VP proteins were identified by Northern Blot and RACE analysis. Using specific anti-NS1 and anti-NS2 antibodies, Western Blot analysis revealed a 78 kDa and a 48 kDa protein, respectively. Finally, the localization of both NS1 and NS2 proteins within the cell nucleus was determined by using Green Fluorescent Protein (GFP) labelling. The genome organization, terminal hairpin structure, transcription and expression strategies as well as the mutualistic relationship with its host, suggested that HaDV2 was a novel member of the genus Iteradensovirus within the subfamily Densovirinae.

  19. Effect of pyramiding Bt and CpTI genes on resistance of cotton to Helicoverpa armigera (Lepidoptera: Noctuidae) under laboratory and field conditions

    NARCIS (Netherlands)

    Cui, J.J.; Luo, J.Y.; Werf, van der W.; Ma, Y.; Xia, J.Y.

    2011-01-01

    Transgenic cotton (Gossypium hirsutum L.) varieties, adapted to China, have been bred that express two genes for resistance to insects. the Cry1Ac gene from Bacillus thuringiensis (Berliner) (Bt), and a trypsin inhibitor gene from cowpea (CpTI). Effectiveness of the double gene modification in

  20. Phylogenetic and functional characterization of ten P450 genes from the CYP6AE subfamily of Helicoverpa armigera involved in xenobiotic metabolism

    DEFF Research Database (Denmark)

    Shi, Yu; Wang, Huidong; Liu, Zhi

    2018-01-01

    450s in this subfamily can metabolise imidacloprid, but with lower efficiency than Bemisia tabaci CYP6CM1vQ. CYP6AE20 had virtually no metabolic competence to these four compounds but could metabolise several model fluorogenic substrates. These results showed the broad substrate spectrum of H...

  1. PRODUCT NEEM AZAL T/S - BROAD-SPECTRUM PHYPOPESTICIDE FOR CONTROL OF PESTS ON VEGETABLE CROPS

    Directory of Open Access Journals (Sweden)

    Vinelina Yankova

    2016-09-01

    Full Text Available Experiments for determination of the effectiveness of product Neem Azal T/S (a. i. azadirachtin were conducted at a concentration of 0,3% against some major pests in vegetable crops grown in greenhouses at the Maritsa Vegetable Crops research Institute, Plovdiv during the period 2010-2016. It was established very good insecticidal and acaricidal action of phytopesticide against: cotton aphid (Aphis gossypii Glov.; green peach aphid (Myzus persicae Sulz.; western flower trips (Frankliniella occidentalis Perg.; cotton bollworm (Helicoverpa armigera Hubn.; tomato borer (Tuta absoluta Meyrick and two-spotted spider mite (Tetranichus urticae Koch.. This product is a successful alternative to using chemical insecticides and acaricides.

  2. The use of 65Zn in the study of Heliothis armigera larva's behavior on tomatoes

    International Nuclear Information System (INIS)

    Saour, George.

    1987-01-01

    Short communication. A summary of a DEA report submitted under the title ''Etude au moyen du Zinc Radioactif 65 Zn du comportement des chenilles d'Heliothis armigera hubner (Lepidoptera, Noctuidae) sur Tomate.'' Univ. de Droit d'Economie et des Sciences d'Aix-Marseille-III. Faculte des Sciences et Techniques de Saint-Jerome. INRA-MONTEAVET, Station de Zoologie

  3. EVALUATION OF FOUR INTEGRATED PEST MANAGEMENT PACKAGES FOR CONTROLLING MAIN PESTS OF COTTON IN RAINFED FIELDS

    Directory of Open Access Journals (Sweden)

    Nurindah Nurindah

    2014-04-01

    Full Text Available Cotton production nationally is low due to various constraints, including pests. Two main pests commonly found in cotton plantation in rain fed fields are cotton leafhopper (Amrasca biguttula and cotton bollworm (Helicoverpa armigera. The study aimed to evaluate four packages of integrated pest management (IPM techniques to control cotton leafhopper and cotton bollworm in rain fed fields. The experiment was conducted in farmers’ fields at Asembagus, East Java, between January and July 2012. Four packages of IPM evaluated were cotton varieties, i.e. Kanesia 10 or Kanesia 13, and seed treatment with synthetic insecticide (imidacloprid before sowing or spraying molasses (10 ml L-1 water as food for natural enemies. The cotton plants were intercropped with groundnut and sprayed with neem seed extract (NSE at the action threshold level for pest control. These packages were compared among themselves and also with the methods usually used by farmers, i.e. planting cotton variety Kanesia 8 intercropped with groundnut and pest control using synthetic chemical insecticides. Twenty five plants were sampled randomly per plot and measured for their growth, leafhopper and  bollworm populations, as well as cotton seed yield per plot. Observations were made weekly, starting at 30 days after planting (DAP until 120 DAP. The results showed that the use of Kanesia 10 or Kanesia 13 intercropped with groundnut and spraying molasses to conserve natural enemies was the best  pest management practice and superior to farmers’ practices. Conserving natural enemies is not only profitable (saving production cost of IDR1,150,000 to IDR1,500,000 ha-1 season-1, but also safe for the environment (no need to spray chemical insecticides.

  4. Identification and characterization of digestive serine proteases from inhibitor-resistant Helicoverpa zea larval midgut

    NARCIS (Netherlands)

    Volpicella, M.; Cordewener, J.H.G.; Jongsma, M.A.; Gallerani, R.; Ceci, L.R.; Beekwilder, M.J.

    2006-01-01

    Protease inhibitors mediate a natural form of plant defence against insects, by interfering with the digestive system of the insect. In this paper, affinity chromatography was used to isolate trypsins and chymotrypsins from Helicoverpa zea larvae, which had been raised on inhibitor-containing diet.

  5. Molecular cloning and functional characterization of the diapause hormone receptor in the corn earworm Helicoverpa zea

    Science.gov (United States)

    The diapause hormone (DH) in the heliothine moth has shown its activity in termination of pupal diapause, while the orthology in the silkworm is known to induce embryonic diapause. In the current study, we cloned the diapause hormone receptor from the corn earworm Helicoverpa zea (HzDHr) and tested ...

  6. Development, survival and fitness performance of Helicoverpa zea (Lepidoptera: Noctuidae) in MON810 Bt field corn.

    Science.gov (United States)

    Horner, T A; Dively, G P; Herbert, D A

    2003-06-01

    Helicoverpa zea (Boddie) development, survival, and feeding injury in MON810 transgenic ears of field corn (Zea mays L.) expressing Bacillus thuringiensis variety kurstaki (Bt) Cry1Ab endotoxins were compared with non-Bt ears at four geographic locations over two growing seasons. Expression of Cry1Ab endotoxin resulted in overall reductions in the percentage of damaged ears by 33% and in the amount of kernels consumed by 60%. Bt-induced effects varied significantly among locations, partly because of the overall level and timing of H. zea infestations, condition of silk tissue at the time of egg hatch, and the possible effects of plant stress. Larvae feeding on Bt ears produced scattered, discontinuous patches of partially consumed kernels, which were arranged more linearly than the compact feeding patterns in non-Bt ears. The feeding patterns suggest that larvae in Bt ears are moving about sampling kernels more frequently than larvae in non-Bt ears. Because not all kernels express the same level of endotoxin, the spatial heterogeneity of toxin distribution within Bt ears may provide an opportunity for development of behavioral responses in H. zea to avoid toxin. MON810 corn suppressed the establishment and development of H. zea to late instars by at least 75%. This level of control is considered a moderate dose, which may increase the risk of resistance development in areas where MON810 corn is widely adopted and H. zea overwinters successfully. Sublethal effects of MON810 corn resulted in prolonged larval and prepupal development, smaller pupae, and reduced fecundity of H. zea. The moderate dose effects and the spatial heterogeneity of toxin distribution among kernels could increase the additive genetic variance for both physiological and behavioral resistance in H. zea populations. Implications of localized population suppression are discussed.

  7. Integrating immunomarking with ecological and behavioural approaches to assess predation of Helicoverpa spp. larvae by wolf spiders in cotton

    Science.gov (United States)

    Wolf spiders (Araneae: Lycosidae) are abundant soil-dwelling predators found in cotton fields and can contribute important pest management services. These spiders can kill and consume larvae of the cotton bollworm Helicoverpa spp. (Lepidoptera: Noctuidae) that survive foraging on Bt cotton and desce...

  8. Effect of Emamectin Benzoate on Mortality, Proboscis Extension, Gustation and Reproduction of the Corn Earworm, Helicoverpa zea

    OpenAIRE

    López, Juan D.; Latheef, M. A.; Hoffmann, W. C.

    2010-01-01

    Newly emerged corn earworm adults, Helicoverpa zea (Boddie) (Lepidoptera: Noctuidae) require a carbohydrate source from plant or other exudates and nectars for dispersal and reproduction. Adults actively seek and forage at feeding sites upon eclosion in the habitat of the larval host plant or during dispersal to, or colonization of, a suitable reproductive habitat. This nocturnal behavior of H. zea has potential for exploitation as a pest management strategy for suppression using an adult fee...

  9. History and Current Status of Development and Use of Viral Insecticides in China

    Directory of Open Access Journals (Sweden)

    Xiulian Sun

    2015-01-01

    Full Text Available The use of insect viruses as biological control agents started in the early 1960s in China. To date, more than 32 viruses have been used to control insect pests in agriculture, forestry, pastures, and domestic gardens in China. In 2014, 57 products from 11 viruses were authorized as commercial viral insecticides by the Ministry of Agriculture of China. Approximately 1600 tons of viral insecticidal formulations have been produced annually in recent years, accounting for about 0.2% of the total insecticide output of China. The development and use of Helicoverpa armigera nucleopolyhedrovirus, Mamestra brassicae nucleopolyhedrovirus, Spodoptera litura nucleopolyhedrovirus, and Periplaneta fuliginosa densovirus are discussed as case studies. Additionally, some baculoviruses have been genetically modified to improve their killing rate, infectivity, and ultraviolet resistance. In this context, the biosafety assessment of a genetically modified Helicoverpa armigera nucleopolyhedrovirus is discussed.

  10. Assessment of Lupin Induced Mutants for Quality Traits and Susceptibility to Callosbruchus chinensis and Heliothis armigera insects

    International Nuclear Information System (INIS)

    Ragab, A.I.; Boshra, S.A.; Mehany, A.L.; Darwish, A.A.; Kharrab, M.M.

    2008-01-01

    This study was conducted to assess 23 induced mutants and two parental varieties Giza1 and Giza2 in the three generations (M3, M4, and M5) for seed quality traits, and susceptibility to two insects i.e C. chinnensis and H.armigera. The obtained results exhibited highly significant decrease for alkaloid content of mutants 20 and 23 as compared with the two local varieties. Most of mutants and Giza 2 showed marked increase for protein content as compared with Giza1, however, the increase did not reach the level of significance for the most mutants as compared with Giza2 in the three generations. Except of M4 generation. marked resistance for infestations with C.chinensis and H.armigera was obtained for mutants 1, 5 and 11 in the three generations. However, for total infestation with the two insects, resistance was obtained in mutants 4 and 10. Except of mutant lines 1, 5 and 11, all mutants showed higher loss percentage than that of the local varieties

  11. Effect of emamectin benzoate on mortality, proboscis extension, gustation and reproduction of the corn earworm, Helicoverpa zea.

    Science.gov (United States)

    López, Juan D; Latheef, M A; Hoffmann, W C

    2010-01-01

    Newly emerged corn earworm adults, Helicoverpa zea (Boddie) (Lepidoptera: Noctuidae) require a carbohydrate source from plant or other exudates and nectars for dispersal and reproduction. Adults actively seek and forage at feeding sites upon eclosion in the habitat of the larval host plant or during dispersal to, or colonization of, a suitable reproductive habitat. This nocturnal behavior of H. zea has potential for exploitation as a pest management strategy for suppression using an adult feeding approach. This approach entails the use of a feeding attractant and stimulant in combination with a toxicant that when ingested by the adult will either reduce fecundity/fertility at sub-lethal dosages or kill the adult. The intent of this study was to assess reproductive inhibition and toxicity of emamectin benzoate on H. zea when ingested by the adults when mixed in ppm active ingredient (wt:vol) with 2.5 M sucrose as a feeding stimulant. Because the mixture has to be ingested to function, the effect of emamectin benzoate was also evaluated at sub-lethal and lethal concentrations on proboscis extension and gustatory response of H. zea in the laboratory. Feral males captured in sex pheromone-baited traps in the field were used for toxicity evaluations because they were readily available and were more representative of the field populations than laboratory-reared adults. Laboratory-reared female moths were used for reproduction effects because it is very difficult to collect newly emerged feral females from the field. Emamectin benzoate was highly toxic to feral H. zea males with LC(50) values (95% CL) being 0.718 (0.532-0.878), 0.525 (0.316-0.751), and 0.182 (0.06-0.294) ppm for 24, 48 and 72 h responses, respectively. Sub-lethal concentrations of emamectin benzoate did not significantly reduce proboscis extension response of feral males and gustatory response of female H. zea. Sublethal concentrations of emamectin benzoate significantly reduced percent larval hatch of

  12. The Helicoverpa zea (Boddie) (Lepidoptera: Noctuidae) voltage-gated sodium channel and mutations associated with pyrethroid resistance in field-collected adult males.

    Science.gov (United States)

    Hopkins, B W; Pietrantonio, P V

    2010-05-01

    Helicoverpa zea is one of the most costly insect pests of food and fiber crops throughout the Americas. Pyrethroid insecticides are widely applied for its control as they are effective and relatively inexpensive; however, resistance to pyrethroids threatens agricultural systems sustainability because alternative insecticides are often more expensive or less effective. Although pyrethroid resistance has been identified in this pest since 1990, the mechanisms of resistance have not yet been elucidated at the molecular level. Pyrethroids exert their toxicity by prolonging the open state of the voltage-gated sodium channel. Here we report the cDNA sequence of the H. zea sodium channel alpha-subunit homologous to the para gene from Drosophila melanogaster. In field-collected males which were resistant to cypermethrin as determined by the adult vial test, we identify known resistance-conferring mutations L1029H and V421M, along with two novel mutations at the V421 residue, V421A and V421G. An additional mutation, I951V, may be the first example of a pyrethroid resistance mutation caused by RNA editing. Identification of the sodium channel cDNA sequence will allow for testing hypotheses on target-site resistance for insecticides acting on this channel through modeling and expression studies. Understanding the mechanisms responsible for resistance will greatly improve our ability to identify and predict resistance, as well as preserve susceptibility to pyrethroid insecticides. Copyright 2010 Elsevier Ltd. All rights reserved.

  13. Developing a neem-based pest management product: laboratory evaluations of neem extracts on insect pests resistance to synthetic pesticides

    Energy Technology Data Exchange (ETDEWEB)

    Ahmad, I.; Permana, A.D.; Rahadian, R.; Wibowo, S.A

    1998-12-16

    Laboratory studies has been conducted as a part of a project aimed at the development of a neem-based insecticide for pest management purposes. Permethrin, a pyrethroid insecticide, and neem (Azadirachta indica) products were tested against larvae of Diamondback Moth Plutella xylostella, and Helicoverpa armigera collected from several locations in West Java, Indonesia. The results of bioassay showed that the average LC{sub 50} values of permethrin for Plutella xylostella had been 60-100 fold higher as compared with the normal dosage recommended. Similarly, the LC{sub 50} values obtained for Helicoverpa armigera had been 46-73 fold as compared with the recommended dosage. These facts suggest that both insects have developed resistance to permethrin. The results of bioassay with neem-products tested against Plutella xylostella and Helicoverpa armigera larvae showed that statistically LC{sub 50} values of neem-products for each strain of either Plutella xylostella or Helicoverpa armigera were not significantly different one to another. We also found that neem-treated insects, even though they were not killed directly by the insecticide, were not able to molt to the next instar or pupae, so that very low percentage of adults emerged. The susceptibility of neem-products could not be easily determined by only measuring the LC{sub 50} values from the larval stage, but the disruption of the growth and development of the insect should be considered as well. Our findings suggest that neem-products could be used effectively to control insects which have developed resistance to conventional insecticide. (author)

  14. Larval Helicoverpa zea Transcriptional, Growth and Behavioral Responses to Nicotine and Nicotiana tabacum

    Directory of Open Access Journals (Sweden)

    Linus Gog

    2014-09-01

    Full Text Available The polyphagous feeding habits of the corn earworm, Helicoverpa zea (Boddie, underscore its status as a major agricultural pest with a wide geographic distribution and host plant repertoire. To study the transcriptomic response to toxins in diet, we conducted a microarray analysis of H. zea caterpillars feeding on artificial diet, diet laced with nicotine and Nicotiana tabacum (L. plants. We supplemented our analysis with growth and aversion bioassays. The transcriptome reflects an abundant expression of proteases, chitin, cytochrome P450 and immune-related genes, many of which are shared between the two experimental treatments. However, the tobacco treatment tended to elicit stronger transcriptional responses than nicotine-laced diet. The salivary factor glucose oxidase, known to suppress nicotine induction in the plant, was upregulated by H. zea in response to tobacco but not to nicotine-laced diet. Reduced caterpillar growth rates accompanied the broad regulation of genes associated with growth, such as juvenile hormone epoxide hydrolase. The differential expression of chemosensory proteins, such as odorant binding-protein-2 precursor, as well as the neurotransmitter nicotinic-acetylcholine-receptor subunit 9, highlights candidate genes regulating aversive behavior towards nicotine. We suggest that an observed coincidental rise in cannibalistic behavior and regulation of proteases and protease inhibitors in H. zea larvae signify a compensatory response to induced plant defenses.

  15. Incipient resistance of Helicoverpa punctigera to the Cry2Ab Bt toxin in Bollgard II cotton.

    Directory of Open Access Journals (Sweden)

    Sharon Downes

    Full Text Available Combinations of dissimilar insecticidal proteins ("pyramids" within transgenic plants are predicted to delay the evolution of pest resistance for significantly longer than crops expressing a single transgene. Field-evolved resistance to Bacillus thuringiensis (Bt transgenic crops has been reported for first generation, single-toxin varieties and the Cry1 class of proteins. Our five year data set shows a significant exponential increase in the frequency of alleles conferring Cry2Ab resistance in Australian field populations of Helicoverpa punctigera since the adoption of a second generation, two-toxin Bt cotton expressing this insecticidal protein. Furthermore, the frequency of cry2Ab resistance alleles in populations from cropping areas is 8-fold higher than that found for populations from non-cropping regions. This report of field evolved resistance to a protein in a dual-toxin Bt-crop has precisely fulfilled the intended function of monitoring for resistance; namely, to provide an early warning of increases in frequencies that may lead to potential failures of the transgenic technology. Furthermore, it demonstrates that pyramids are not 'bullet proof' and that rapid evolution to Bt toxins in the Cry2 class is possible.

  16. Analysis of variation in virulence of Beauveria bassiana against insect pests of pigeonpea using qPCR.

    Science.gov (United States)

    Senthilraja, Govindasamy; Anand, Theerthagiri; Mohankumar, Subbarayalu; Raguchander, Thiruvengadam; Samiyappan, Ramasamy

    2018-03-01

    Beauveria bassiana is a broad spectrum microbial bioagent used for the control of agriculturally important insect pests. However, in our experiments, two virulent isolates of B. bassiana (B2 and B10) showed specific preference toward Maruca vitrata and Helicoverpa armigera of pigeonpea. To better understand this feature, we developed a qPCR assay to quantify the chitinase (virulence factor) of B. bassiana during the infection process. Isolates of B. bassiana were grown on insect cuticle amended medium and minimal medium (without insect cuticle) to assess the induction of chitinase. Our results revealed a positive correlation between expression of chitinase by B. bassiana and the substrates (with or without cuticles of M. vitrata and H. armigera) used. This study showcases the methodology to quantify the chitinase and analysis of variation in virulence of B. bassiana (B2 and B10) against M. vitrata and H. armigera. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Diapause hormone in the corn earworm, Helicoverpa zea: Optimum temperature for activity, structure–activity relationships, and efficacy in accelerating flesh fly pupariation

    Czech Academy of Sciences Publication Activity Database

    Zhang, Q.; Žďárek, Jan; Nachman, R. J.; Denlinger, D. L.

    2008-01-01

    Roč. 29, č. 2 (2008), s. 196-205 ISSN 0196-9781 Institutional research plan: CEZ:AV0Z40550506 Keywords : diapause hormone * neuropeptide analogs * diapause termination * pupariation * Helicoverpa zea Subject RIV: CC - Organic Chemistry Impact factor: 2.565, year: 2008

  18. Agricultural production - Phase 2. Indonesia. Insect ecology studies and insect pest control

    International Nuclear Information System (INIS)

    Butt, B.

    1992-01-01

    This document reviews the activities of the Pest Control Research Group in Indonesia. Pests under study are the diamondback moth (Plutella xylostella), the rice stem borer (Chilo suppressalis), the sugar cane borer (Chilo auricilius), bean flies (Agromyza spp.), tobacco insects (Heliothis armigera and Spodoptera litura) and cotton insects, especially the pink bollworm

  19. Characterisation of Bacillus thuringiensis kurstaki strains by toxicity ...

    African Journals Online (AJOL)

    , dipel, HD73, HD1dipel) were characterized by investigating their total plasmid profiling; cryIA genes profiling and toxicity towards local isolates of agricultural insects Helicoverpa armigera and Spodoptera litura. Result showed that LC50 for S.

  20. Transgenic Bacillus thuringiensis (Bt) chickpea: India's most wanted ...

    African Journals Online (AJOL)

    Sumita

    2013-09-25

    Sep 25, 2013 ... most wanted genetically modified (GM) pulse crop. Sumita Acharjee and Bidyut ... (predominantly, Helicoverpa armigera) and diseases, lack of supply of quality seeds, ... emerging from winter diapause. The trap crops are.

  1. Integration of biological control and transgenic insect protection for mitigation of mycotoxins in corn

    Science.gov (United States)

    Biological control is known to be effective in reducing aflatoxin contamination of corn and some transgenic corn hybrids incur greatly reduced damage from corn earworm (Helicoverpa zea). We conducted seven field trials over two years to test the hypothesis that transgenic insect protection and biol...

  2. Helicoverpa zea (Lepidoptera: Noctuidae) and Spodoptera frugiperda (Lepidoptera: Noctuidae) Responses to Sorghum bicolor (Poales: Poaceae) Tissues From Lowered Lignin Lines.

    Science.gov (United States)

    Dowd, Patrick F; Sattler, Scott E

    2015-01-01

    The presence of lignin within biomass impedes the production of liquid fuels. Plants with altered lignin content and composition are more amenable to lignocellulosic conversion to ethanol and other biofuels but may be more susceptible to insect damage where lignin is an important resistance factor. However, reduced lignin lines of switchgrasses still retained insect resistance in prior studies. Therefore, we hypothesized that sorghum lines with lowered lignin content will also retain insect resistance. Sorghum excised leaves and stalk pith Sorghum bicolor (L.) Moench (Poales: Poaceae) from near isogenic brown midrib (bmr) 6 and 12 mutants lines, which have lowered lignin content and increased lignocellulosic ethanol conversion efficiency, were examined for insect resistance relative to wild-type (normal BTx623). Greenhouse and growth chamber grown plant tissues were fed to first-instar larvae of corn earworms, Helicoverpa zea (Boddie) and fall armyworms Spodoptera frugiperda (J.E. Smith) (Lepidoptera: Noctuidae), two sorghum major pests. Younger bmr leaves had significantly greater feeding damage in some assays than wild-type leaves, but older bmr6 leaves generally had significantly less damage than wild-type leaves. Caterpillars feeding on the bmr6 leaves often weighed significantly less than those feeding on wild-type leaves, especially in the S. frugiperda assays. Larvae fed the pith from bmr stalks had significantly higher mortality compared with those larvae fed on wild-type pith, which suggested that bmr pith was more toxic. Thus, reducing lignin content or changing subunit composition of bioenergy grasses does not necessarily increase their susceptibility to insects and may result in increased resistance, which would contribute to sustainable production. Published by Oxford University Press on behalf of the Entomological Society of America 2015. This work is written by US Government employees and is in the public domain in the US.

  3. Use of radiation induction to improve new cotton lines resistant to Heliothis armigera

    Energy Technology Data Exchange (ETDEWEB)

    Hormchan, P [Dept. of Entomology, Faculty of Agriculture, Kasetsart Univ., Bangkok (Thailand); Wongpiyasatid, A [Dept. of Applied and Isotopes Faculty fo Science, Kasetsart Univ., Bangkok (Thailand)

    1996-12-01

    Ratchada 1 (R{sub 1}) seeds irradiated with 300 gray of gamma rays in order to obtain new cotton lines resistant to the American bollworm with high yield and good quality were compared with Srisamrong 2 (SR{sub 1}) and Ratchada 1 (R{sub 1}), the present recommended varieties to the farmers. The experiments were conducted under both laboratory and field conditions for 3 consecutive years and 2 new lines, A P{sub 1} and A P{sub 2} in M{sub 5} with the required attribute, were finally selected. In the lab, after feeding 2 nd instar bollworm larvae with young leaves of tested lines and the controls the increased weight, larval length, pupal weight of new lines were found to be better than those of SR{sub 2} and R{sub 1} including % gossypol and flavonoids, the substances being expected to give antibiotic effect to the insects. Physical aberration was also noticed in A P{sub 1}. As of the field condition, with the similar amount of bollworm numbers, the 10 fresh boll weight, lint weight, seed weight, % lint, micronaire fibre strength, and fibre length were found to be higher and better than those of both controls as well. However, further tests in large scale of farmers` field a period of time will have to be undertaken to ascertain the result

  4. Sorghum Seed Maturity Affects the Weight and Feeding Duration of Immature Corn Earworm, Helicoverpa zea, and Fall Armyworm, Spodoptera frugiperda, in the Laboratory

    Science.gov (United States)

    Soper, Alysha M.; Whitworth, R. Jeff; McCornack, Brian P.

    2013-01-01

    Corn earworm, Helicoverpa zea Boddie (Lepidoptera: Noctuidae), and fall armyworm, Spodoptera frugiperda J.E. Smith, are occasional pests in sorghum, Sorghum bicolor L. Moench (Poales: Poaceae), and can be economically damaging when conditions are favorable. Despite the frequent occurrence of mixed-species infestations, the quantitative data necessary for developing yield loss relationships for S. frugiperda are not available. Although these species share similar biological characteristics, it is unknown whether their damage potentials in developing grain sorghum panicles are the same. Using no-choice feeding assays in the laboratory, this study examined larval growth and feeding duration for H. zea and S. frugiperda in the absence of competition. Each species responded positively when exposed to sorghum seed in the soft-dough stage, supporting evidence for the interactions between host-quality and larval growth and development. The results of this study also confirmed the suitability of using laboratory-reared H. zea to develop sorghum yield loss estimates in the field, and provided insights into the biological responses of S. frugiperda feeding on developing sorghum seed. PMID:24219328

  5. DETERMINAÇÃO DO NÚMERO DE FÊMEAS VIRGENS POR ARMADILHA E PERIODICIDADE DE CAPTURA DE MACHOS DE Helicoverpa zea (BODDIE (LEPIDOPTERA: NOCTUIDAE

    Directory of Open Access Journals (Sweden)

    MATRANGOLO W.J.R

    1996-01-01

    Full Text Available Avaliou-se em lavouras de milho em fase de liberação de estilo-estigmas, na EMBRAPA/CNPMS, em Sete Lagoas, MG, a atratividade de diferentes números de fêmeas virgens de Helicoverpa zea (Boddie em armadilha adesiva, além de uma formulação comercial do feromônio sintético, proveniente dos E.E.U.U. A maior atividade de procura por acasalamento teve início nas primeiras horas da noite. Não houve diferença significativa entre médias de insetos capturados com uma, três ou cinco fêmeas. Cinco fêmeas por armadilha tornam o monitoramento pouco prático; uma apenas pode comprometer a captura por disfunção fisiológica ou mesmo morte. Não houve captura nas armadilhas contendo feromônio sintético, que, ao invés, capturou machos de Mythimna, outro Noctuidae. A maior freqüência de captura nas armadilhas ocorreu após a meia noite, diminuindo próximo do alvorecer. O horário de início de chamamento e captura esteve estreitamente relacionado com a temperatura ambiente.

  6. Sorghum seed maturity affects the weight and feeding duration of immature corn earworm, Helicoverpa zea, and fall armyworm, Spodoptera frugiperda, in the laboratory.

    Science.gov (United States)

    Soper, Alysha M; Whitworth, R Jeff; McCornack, Brian P

    2013-01-01

    Corn earworm, Helicoverpa zea Boddie (Lepidoptera: Noctuidae), and fall armyworm, Spodoptera frugiperda J.E. Smith, are occasional pests in sorghum, Sorghum bicolor L. Moench (Poales: Poaceae), and can be economically damaging when conditions are favorable. Despite the frequent occurrence of mixed-species infestations, the quantitative data necessary for developing yield loss relationships for S. frugiperda are not available. Although these species share similar biological characteristics, it is unknown whether their damage potentials in developing grain sorghum panicles are the same. Using no-choice feeding assays in the laboratory, this study examined larval growth and feeding duration for H. zea and S. frugiperda in the absence of competition. Each species responded positively when exposed to sorghum seed in the soft-dough stage, supporting evidence for the interactions between host-quality and larval growth and development. The results of this study also confirmed the suitability of using laboratory-reared H. zea to develop sorghum yield loss estimates in the field, and provided insights into the biological responses of S. frugiperda feeding on developing sorghum seed.

  7. Reduced plant nutrition under elevated CO2 depresses the immunocompetence of cotton bollworm against its endoparasite

    OpenAIRE

    Yin, Jin; Sun, Yucheng; Ge, Feng

    2014-01-01

    Estimating the immunocompetence of herbivore insects under elevated CO2 is an important step in understanding the effects of elevated CO2 on crop-herbivore-natural enemy interactions. Current study determined the effect of elevated CO2 on the immune response of Helicoverpa armigera against its parasitoid Microplitis mediator. H. armigera were reared in growth chambers with ambient or elevated CO2, and fed wheat grown in the concentration of CO2 corresponding to their treatment levels. Our res...

  8. Chlorantraniliprole as a candidate pesticide used in combination with the attracticides for lepidopteran moths.

    Science.gov (United States)

    Liu, Yongqiang; Gao, Yu; Liang, Gemei; Lu, Yanhui

    2017-01-01

    Methomyl is currently used as a toxicant for the attracticide BioAttract in cotton and vegetables in China. However, methomyl is highly toxic to non-target organisms and a more environmental friendly acceptable alternative is required. Larvae of three lepidopteran insects Helicoverpa armigera, Agrotis ipsilon and Spodoptera litura are important pests of these crops in China. In the present study, the toxicity of 23 commonly used insecticides were tested on H. armigera, then tested the susceptibility of A. ipsilon and S. litura moths to the insecticides which were the most toxic to H. armigera, and the acute toxicity of the most efficacious insecticides were further investigated under laboratory conditions. Chlorantraniliprole, emamectin benzoate, spinetoram, spinosad and methomyl exhibited high levels of toxicity to H. armigera moths with a mortality of 86.67%, 91.11%, 73.33%, 57.78% and 80.00%, respectively, during 24 h period at the concentration of 1 mg a.i. L-1. Among these five insecticides, A. ipsilon and S. litura moths were more sensitive to chlorantraniliprole, emamectin benzoate and methomyl. The lethal time (LT50) values of chlorantraniliprole and methomyl were shorter than emamectin benzoate for all three lepidopteran moth species at 1000 mg a.i. L-1 compared to concentrations of 500, 100 and 1 mg a.i L-1. Chlorantraniliprole was found to have similar levels of toxicity and lethal time on the three lepidopteran moths tested to the standard methomyl, and therefore, can be used as an alternative insecticide to methomyl in the attracticide for controlling these pest species.

  9. Baseline sensitivity of maize borers in India to the Bacillus thuringiensis insecticidal proteins Cry1A.105 and Cry2Ab2.

    Science.gov (United States)

    Jalali, Sushil K; Yadavalli, Lalitha; Ojha, Rakshit; Kumar, Pradyumn; Sulaikhabeevi, Suby B; Sharma, Reema; Nair, Rupa; Kadanur, Ravi C; Kamath, Subray P; Komarlingam, Mohan S

    2015-08-01

    Among the major pests of maize in India are two stem borers, Chilo partellus (Swinhoe) and Sesamia inferens (Walker), and an earworm, Helicoverpa armigera (Hübner). As a pest control strategy, transgenic Bacillus thuringiensis (Bt) maize hybrids are undergoing regulatory trials in India. We have determined the sensitivity of the target lepidopterans to the insecticidal Bt proteins expressed in Bt maize, as this determines product efficacy and the resistance management strategy to be adopted. Maize hybrids with event MON89034 express two insecticidal Bt proteins, Cry1A.105 and Cry2Ab2. Sensitivity profiles of 53 populations of C. partellus, 21 populations of S. inferens and 21 populations of H. armigera, collected between 2008 and 2013 from maize-growing areas in India, to Cry1A.105 and Cry2Ab2 proteins were generated through dose-response assays. Cry1A.105 protein was the most effective to neonates of C. partellus (mean MIC90 range 0.30-1.0 µg mL(-1) ) and H. armigera (mean MIC90 range 0.71-8.22 µg mL(-1) ), whereas Cry2Ab2 (mean MIC90 range 0.65-1.70 µg mL(-1) ) was the most effective to S. inferens. Populations of C. partellus, S. inferens and H. armigera were susceptible to the Bt proteins Cry1A.105 and Cry2Ab2. The Bt sensitivity data will serve as precommercialisation benchmarks for resistance monitoring purposes. © 2014 Society of Chemical Industry.

  10. African Journal of Biotechnology - Vol 11, No 30 (2012)

    African Journals Online (AJOL)

    Propagation physiology of Juniperus phoenicea L. from Jordan using seeds and in vitro culture techniques: Baseline information for a conservation perspective ... Morphological and chemical characteristics of tomato foliage as mechanisms of resistance to Helicoverpa armigera (Hübner) (Lepidoptera: Noctuidae) larvae ...

  11. DNA synthesis in the imaginal wing discs of the American bollworm ...

    Indian Academy of Sciences (India)

    Unknown

    The effect of two insect growth regulators of plant origin viz. plumbagin and azadirachtin and the ecdysteroids. 20-hydroxyecdysone, makisterone A and a phytoecdysteroid on DNA synthesis in imaginal wing discs of day 4 final instar Helicoverpa armigera larvae was studied. DNA synthesis increased with increase in time of.

  12. Genetically pyramiding protease-inhibitor genes for dual broad-spectrum resistance against insect and phytopathogens in transgenic tobacco.

    Science.gov (United States)

    Senthilkumar, Rajendran; Cheng, Chiu-Ping; Yeh, Kai-Wun

    2010-01-01

    Protease inhibitors provide a promising means of engineering plant resistance against attack by insects and pathogens. Sporamin (trypsin inhibitor) from sweet potato and CeCPI (phytocystatin) from taro were stacked in a binary vector, using pMSPOA (a modified sporamin promoter) to drive both genes. Transgenic tobacco lines of T0 and T1 generation with varied inhibitory activity against trypsin and papain showed resistance to both insects and phytopathogens. Larvae of Helicoverpa armigera that ingested tobacco leaves either died or showed delayed growth and development relative to control larvae. Transgenic tobacco-overexpressing the stacked genes also exhibited strong resistance against bacterial soft rot disease caused by Erwinia carotovora and damping-off disease caused by Pythium aphanidermatum. Thus, stacking protease-inhibitor genes, driven by the wound and pathogen responsive pMSPOA promoter, is an effective strategy for engineering crops to resistance against insects and phytopathogens.

  13. The natural refuge policy for Bt cotton (Gossypium L. in Pakistan – a situation analysis

    Directory of Open Access Journals (Sweden)

    Muhammad Sajjad Ali

    2013-07-01

    Full Text Available Bt cotton (event Cry1Ac was formally commercialized in Pakistan in 2010. However, there has been an increasing trend of planting unauthorized Bt cotton germplasm in farmers' fields since 2003 with a high rate of adoption in the core cotton areas especially in the province Punjab. The transgenic cotton technology has provided the growers with substantial economic benefits and has reduced their dependence on pesticides for pest control, especially against Helicoverpa armigera (Hubner. However, keeping in view the capacity of this insect to develop resistance against novel chemical formulations, it is easily speculated that Bt toxin, too, is no exception. Refuge crop policy for mono transgenic crop events has helped in delaying the rate of resistance evolution in the target pests. Thus, in Pakistan, where planting of structured refuge crops along Bt cotton fields is not mandatory, the effectiveness and durability of Bt cotton technology may decrease due to a number of factors which are discussed in this review.

  14. Safety assessment and detection method of genetically modified Chinese Kale (Brassica oleracea cv. alboglabra ).

    Science.gov (United States)

    Lin, Chih-Hui; Lu, Chien-Te; Lin, Hsin-Tang; Pan, Tzu-Ming

    2009-03-11

    Sporamins are tuberous storage proteins and account for 80% of soluble protein in sweet potato tubers with trypsin-inhibitory activity. The expression of sporamin protein in transgenic Chinese kale (line BoA 3-1) conferred insecticidal activity toward corn earworm [ Helicoverpa armigera (Hubner)] in a previous report. In this study, we present a preliminary safety assessment of transgenic Chinese kale BoA 3-1. Bioinformatic and simulated gastric fluid (SGF) analyses were performed to evaluate the allergenicity of sporamin protein. The substantial equivalence between transgenic Chinese kale and its wild-type host has been demonstrated by the comparison of important constituents. A reliable real-time polymerase chain reaction (PCR) detection method was also developed to control sample quality. Despite the results of most evaluations in this study being negative, the safety of sporamin in transgenic Chinese kale BoA 3-1 was uncluded because of the allergenic risk revealed by bioinformatic analysis.

  15. Insect Resistance to Bacillus thuringiensis Toxin Cry2Ab Is Conferred by Mutations in an ABC Transporter Subfamily A Protein.

    Directory of Open Access Journals (Sweden)

    Wee Tek Tay

    2015-11-01

    Full Text Available The use of conventional chemical insecticides and bacterial toxins to control lepidopteran pests of global agriculture has imposed significant selection pressure leading to the rapid evolution of insecticide resistance. Transgenic crops (e.g., cotton expressing the Bt Cry toxins are now used world wide to control these pests, including the highly polyphagous and invasive cotton bollworm Helicoverpa armigera. Since 2004, the Cry2Ab toxin has become widely used for controlling H. armigera, often used in combination with Cry1Ac to delay resistance evolution. Isolation of H. armigera and H. punctigera individuals heterozygous for Cry2Ab resistance in 2002 and 2004, respectively, allowed aspects of Cry2Ab resistance (level, fitness costs, genetic dominance, complementation tests to be characterised in both species. However, the gene identity and genetic changes conferring this resistance were unknown, as was the detailed Cry2Ab mode of action. No cross-resistance to Cry1Ac was observed in mutant lines. Biphasic linkage analysis of a Cry2Ab-resistant H. armigera family followed by exon-primed intron-crossing (EPIC marker mapping and candidate gene sequencing identified three independent resistance-associated INDEL mutations in an ATP-Binding Cassette (ABC transporter gene we named HaABCA2. A deletion mutation was also identified in the H. punctigera homolog from the resistant line. All mutations truncate the ABCA2 protein. Isolation of further Cry2Ab resistance alleles in the same gene from field H. armigera populations indicates unequal resistance allele frequencies and the potential for Bt resistance evolution. Identification of the gene involved in resistance as an ABC transporter of the A subfamily adds to the body of evidence on the crucial role this gene family plays in the mode of action of the Bt Cry toxins. The structural differences between the ABCA2, and that of the C subfamily required for Cry1Ac toxicity, indicate differences in the

  16. Improved insecticidal toxicity by fusing Cry1Ac of Bacillus thuringiensis with Av3 of Anemonia viridis.

    Science.gov (United States)

    Yan, Fu; Cheng, Xing; Ding, Xuezhi; Yao, Ting; Chen, Hanna; Li, Wenping; Hu, Shengbiao; Yu, Ziquan; Sun, Yunjun; Zhang, Youming; Xia, Liqiu

    2014-05-01

    Av3, a neurotoxin of Anemonia viridis, is toxic to crustaceans and cockroaches but inactive in mammals. In the present study, Av3 was expressed in Escherichia coli Origami B (DE3) and purified by reversed-phase liquid chromatography. The purified Av3 was injected into the hemocoel of Helicoverpa armigera, rendering the worm paralyzed. Then, Av3 was expressed alone or fusion expressed with the Cry1Ac in acrystalliferous strain Cry(-)B of Bacillus thuringiensis. The shape of Cry1Ac was changed by fusion with Av3. The expressed fusion protein, Cry1AcAv3, formed irregular rhombus- or crescent-shaped crystalline inclusions, which is quite different from the shape of original Cry1Ac crystals. The toxicity of Cry1Ac was improved by fused expression. Compared with original Cry1Ac expressed in Cry(-)B, the oral toxicity of Cry1AcAv3 to H. armigera was elevated about 2.6-fold. No toxicity was detected when Av3 was expressed in Cry(-)B alone. The present study confirmed that marine toxins could be used in bio-control and implied that fused expression with other insecticidal proteins could be an efficient way for their application.

  17. Diversity and abundance of lepidopteran populations from selected crops of district faisalabad, pakistan

    International Nuclear Information System (INIS)

    Maalik, S.; Rana, S.A.; Khan, H.A.; Ashfaq, M.

    2012-01-01

    Lepidopterans are represented by one of the most diverse group of insects. They are phytophagous as well as pollinators at the same time. During present study four crops i.e Wheat, Fodder, Brassica and Vegetables were sampled to assess the diversity and abundance of Lepidopteran populations. A total of 2811 specimens belonging to 14 species and 6 families were recorded. Pieris brassicae (29.46%) was the dominant species followed by Trichoplusia ni (19.28%), Helicoverpa Zea (11.78%), Helicoverpa armigera (11.60%), Spodoptera exigua (6.65%), Psedoplusia includes (5.09%), Spodoptera litura (3.81%), Agrotis ipsilon (4.87%), Plutella xylostella (2.92%), Lymatria dispar (2.24%), Pieris rapae (0.92%), Galleria mellonella (0.71%), Evergestris rimosalis (0.53%) and Menduca sexta (0.14%). Significant differences were observed among different crops by applying Shannon Diversity Index and T- test. CA (Cluster analysis) represented the species association with different crops. Majority of the species showed association with Vegetables and Fodder and least association was observed with Wheat. Such types of studies are necessary to design integrated pest management programs to control these pests. (author)

  18. Impact of the Stem Extract of on the Feeding Potential and Histological Architecture of the Midgut Epithelial Tissue of Early Fourth Instars of HÜbner

    Directory of Open Access Journals (Sweden)

    Monika Mishra

    2015-01-01

    Full Text Available Helicoverpa armigera HÜbner is one of the most important agricultural crop pests in the world causing heavy crop yield losses. The continued and indiscriminate use of synthetic insecticides in agriculture for their control has received wide public apprehension because of multifarious problems, including insecticide resistance, resurgence of pest species, environmental pollution, and toxic hazards to humans and nontarget organisms. These problems have necessitated the need to explore and develop alternative strategies using eco-friendly and biodegradable plant products. In view of this, the efficacy of Thevetia neriifolia methanol stem extract was evaluated against the early fourth instars of H. armigera as an antifeedant and stomach poison agent. Feeding of larvae with the diet containing 0.005%–5.0% extract resulted in 2.06%–37.35% antifeedant index; the diet with 5.0% extract caused 54.3% reduced consumption. The negative impact of extract on larval feeding resulted in 37.5%–77.7% starvation, causing adverse effects on the larval weight. Choice between control and experimental diet resulted in feeding preference of larvae for the control diet, leading to 7.3%–42.9% reduced consumption of extract-containing diet. The only exception was the diet with 0.005% extract, which could not cause any deterrence. The midgut histological architecture of H. armigera larvae fed with 0.005%–0.05% extract-containing diet with negligible antifeedant potential showed significant damage, shrinkage, and distortion and vacuolization of gut tissues and peritrophic membrane, causing the disintegration of epithelial, goblet, and regenerative cells; the damage increased with the increase in concentration. These changes in the gut caused negative impact on the digestion and absorption of food and thus nutritional deficiency in the larvae, which could probably affect their growth and development. This study reveal the appreciable stomach poison potential of T

  19. 2678-IJBCS-Article-Abla Dela Mondedji

    African Journals Online (AJOL)

    hp

    l'envahissement de la flore forestière togolaise par les espèces végétales exotiques : cas du neem (Azadirachta indica). Mémoire de D.E.A., Université de Lomé, 61p. Kranthi KR, Jadhav D, Wanjari R, Kranrhi S,. Russel D. 2001. Pyrethroid resistance and mechanisms of resistance in field strains of Helicoverpa armigera.

  20. Transmission of Different Nucleopolyhedroviruses by Two Ectoparasitoids – Bracon hebetor Say (Hymenoptera: Braconidae) and Euplectrus plathypenae (Howard) (Hymenoptera: Eulophidae)

    OpenAIRE

    Emanouela E. Stoianova; Nikolay A. Balevski

    2010-01-01

    The transmission of nucleopolyhedroviruses (NPVs) of Autographa gamma (AgNPV), Mamestra brassicae (MbNPV), Lacanobia oleraceae (LoNPV), Helicoverpa armigera (HaNPV) and Xantia c-nigrum (XnNPV) to their relevant larvae by the ectoparasitoid Bracon hebetor and the transmission of the multiple-enveloped NPVs of Spodoptera exigua (SeMNPV) and Spodoptera frugiperda (SfMNPV) by the ectoparasitoid Euplectrus plathypenae was examined. Two methods of contamination of the both parasitoids (exposure to ...

  1. Des pratiques culturales influent sur les attaques de deux ravageurs ...

    African Journals Online (AJOL)

    La culture de tomate est attaquée par plusieurs ravageurs dont Helicoverpa armigera et Tuta absoluta. Dans le but d'évaluer l'effet des pratiques culturales de la tomate sur ces principaux ravageurs dans les Niayes (Sénégal), un échantillonnage de 98 parcelles est effectué, sur quatre cycles de culture en saison sèche, de ...

  2. Expression of a maize Myb transcription factor driven by a putative silk-specific promoter significantly enhances resistance to Helicoverpa zea in transgenic maize.

    Science.gov (United States)

    Johnson, Eric T; Berhow, Mark A; Dowd, Patrick F

    2007-04-18

    Hi II maize (Zea mays) plants were engineered to express maize p1 cDNA, a Myb transcription factor, controlled by a putative silk specific promoter, for secondary metabolite production and corn earworm resistance. Transgene expression did not enhance silk color, but about half of the transformed plant silks displayed browning when cut, which indicated the presence of p1-produced secondary metabolites. Levels of maysin, a secondary metabolite with insect toxicity, were highest in newly emerged browning silks. The insect resistance of transgenic silks was also highest at emergence, regardless of maysin levels, which suggests that other unidentified p1-induced molecules likely contributed to larval mortality. Mean survivor weights of corn earworm larvae fed mature browning transgenic silks were significantly lower than weights of those fed mature nonbrowning transgenic silks. Some transgenic pericarps browned with drying and contained similar molecules found in pericarps expressing a dominant p1 allele, suggesting that the promoter may not be silk-specific.

  3. Developing Cotton IPM by Conserving Parasitoids and Predators of The Main Pest

    Directory of Open Access Journals (Sweden)

    Nurindah Nurindah

    2015-09-01

    Full Text Available On early development of intensive cotton program, insect pests were considered as an important aspect in cotton cultivation, so that it needed to be scheduled sprays. The frequency of sprays was 7 times used 12L of chemical insecticides per hectare per season. Development of cotton IPM was emphasized on non-chemical control methods through optimally utilize natural enemies of the cotton main pests (Amrasca biguttulla (IshidaHelicoverpa armigera (Hübner. Conservation of parasitoids and predators by providing the environment that support their population development is an act of supporting the natural enemies as an effective biotic mortality factor of the insect pests. The conservation could be done by improving the plant matter and cultivation techniques that include the use of resistant variety to leafhopper, intercropping cotton with secondary food plants, mulch utilization, using action threshold that considered the presence of natural enemies, and application of botanical insecticides, if needed. Conservation of parasitoids and predators in cotton IPM could control the insect pests without any insecticide spray in obtaining the production of cotton seed. As such, the use of IPM method would increase farmers’ income.

  4. Transgenic plants expressing the AaIT/GNA fusion protein show increased resistance and toxicity to both chewing and sucking pests.

    Science.gov (United States)

    Liu, Shu-Min; Li, Jie; Zhu, Jin-Qi; Wang, Xiao-Wei; Wang, Cheng-Shu; Liu, Shu-Sheng; Chen, Xue-Xin; Li, Sheng

    2016-04-01

    The adoption of pest-resistant transgenic plants to reduce yield losses and decrease pesticide use has been successful. To achieve the goal of controlling both chewing and sucking pests in a given transgenic plant, we generated transgenic tobacco, Arabidopsis, and rice plants expressing the fusion protein, AaIT/GNA, in which an insecticidal scorpion venom neurotoxin (Androctonus australis toxin, AaIT) is fused to snowdrop lectin (Galanthus nivalis agglutinin, GNA). Compared with transgenic tobacco and Arabidopsis plants expressing AaIT or GNA, transgenic plants expressing AaIT/GNA exhibited increased resistance and toxicity to one chewing pest, the cotton bollworm, Helicoverpa armigera. Transgenic tobacco and rice plants expressing AaIT/GNA showed increased resistance and toxicity to two sucking pests, the whitefly, Bemisia tabaci, and the rice brown planthopper, Nilaparvata lugens, respectively. Moreover, in the field, transgenic rice plants expressing AaIT/GNA exhibited a significant improvement in grain yield when infested with N. lugens. This study shows that expressing the AaIT/GNA fusion protein in transgenic plants can be a useful approach for controlling pests, particularly sucking pests which are not susceptible to the toxin in Bt crops. © 2015 Institute of Zoology, Chinese Academy of Sciences.

  5. Transgenic Cotton Plants Expressing Double-stranded RNAs Target HMG-CoA Reductase (HMGR) Gene Inhibits the Growth, Development and Survival of Cotton Bollworms.

    Science.gov (United States)

    Tian, Geng; Cheng, Linlin; Qi, Xuewei; Ge, Zonghe; Niu, Changying; Zhang, Xianlong; Jin, Shuangxia

    2015-01-01

    RNA interference (RNAi) has been developed as a powerful technique in the research of functional genomics as well as plant pest control. In this report, double-stranded RNAs (dsRNA) targeting 3-hydroxy-3-methylglutaryl coenzyme A reductase (HMGR) gene, which catalyze a rate-limiting enzymatic reaction in the mevalonate pathway of juvenile hormone (JH) synthesis in cotton bollworm, was expressed in cotton plants via Agrobacterium tumefaciens-mediated transformation. PCR and Sothern analysis revealed the integration of HMGR gene into cotton genome. RT-PCR and qRT-PCR confirmed the high transcription level of dsHMGR in transgenic cotton lines. The HMGR expression both in transcription and translation level was significantly downregulated in cotton bollworms (helicoverpa armigera) larvae after feeding on the leaves of HMGR transgenic plants. The transcription level of HMGR gene in larvae reared on transgenic cotton leaves was as much as 80.68% lower than that of wild type. In addition, the relative expression level of vitellogenin (Vg, crucial source of nourishment for offspring embryo development) gene was also reduced by 76.86% when the insect larvae were fed with transgenic leaves. The result of insect bioassays showed that the transgenic plant harboring dsHMGR not only inhibited net weight gain but also delayed the growth of cotton bollworm larvae. Taken together, transgenic cotton plant expressing dsRNAs successfully downregulated HMGR gene and impaired the development and survival of target insect, which provided more option for plant pest control.

  6. Enhanced methanol production in plants provides broad spectrum insect resistance.

    Directory of Open Access Journals (Sweden)

    Sameer Dixit

    Full Text Available Plants naturally emit methanol as volatile organic compound. Methanol is toxic to insect pests; but the quantity produced by most of the plants is not enough to protect them against invading insect pests. In the present study, we demonstrated that the over-expression of pectin methylesterase, derived from Arabidopsis thaliana and Aspergillus niger, in transgenic tobacco plants enhances methanol production and resistance to polyphagous insect pests. Methanol content in the leaves of transgenic plants was measured using proton nuclear spectroscopy (1H NMR and spectra showed up to 16 fold higher methanol as compared to control wild type (WT plants. A maximum of 100 and 85% mortality in chewing insects Helicoverpa armigera and Spodoptera litura larvae was observed, respectively when fed on transgenic plants leaves. The surviving larvae showed less feeding, severe growth retardation and could not develop into pupae. In-planta bioassay on transgenic lines showed up to 99 and 75% reduction in the population multiplication of plant sap sucking pests Myzus persicae (aphid and Bemisia tabaci (whitefly, respectively. Most of the phenotypic characters of transgenic plants were similar to WT plants. Confocal microscopy showed no deformities in cellular integrity, structure and density of stomata and trichomes of transgenic plants compared to WT. Pollen germination and tube formation was also not affected in transgenic plants. Cell wall enzyme transcript levels were comparable with WT. This study demonstrated for the first time that methanol emission can be utilized for imparting broad range insect resistance in plants.

  7. Enhanced Methanol Production in Plants Provides Broad Spectrum Insect Resistance

    Science.gov (United States)

    Dixit, Sameer; Upadhyay, Santosh Kumar; Singh, Harpal; Sidhu, Om Prakash; Verma, Praveen Chandra; K, Chandrashekar

    2013-01-01

    Plants naturally emit methanol as volatile organic compound. Methanol is toxic to insect pests; but the quantity produced by most of the plants is not enough to protect them against invading insect pests. In the present study, we demonstrated that the over-expression of pectin methylesterase, derived from Arabidopsis thaliana and Aspergillus niger, in transgenic tobacco plants enhances methanol production and resistance to polyphagous insect pests. Methanol content in the leaves of transgenic plants was measured using proton nuclear spectroscopy (1H NMR) and spectra showed up to 16 fold higher methanol as compared to control wild type (WT) plants. A maximum of 100 and 85% mortality in chewing insects Helicoverpa armigera and Spodoptera litura larvae was observed, respectively when fed on transgenic plants leaves. The surviving larvae showed less feeding, severe growth retardation and could not develop into pupae. In-planta bioassay on transgenic lines showed up to 99 and 75% reduction in the population multiplication of plant sap sucking pests Myzus persicae (aphid) and Bemisia tabaci (whitefly), respectively. Most of the phenotypic characters of transgenic plants were similar to WT plants. Confocal microscopy showed no deformities in cellular integrity, structure and density of stomata and trichomes of transgenic plants compared to WT. Pollen germination and tube formation was also not affected in transgenic plants. Cell wall enzyme transcript levels were comparable with WT. This study demonstrated for the first time that methanol emission can be utilized for imparting broad range insect resistance in plants. PMID:24223989

  8. Design, Synthesis, and Insecticidal Activity of Some Novel Diacylhydrazine and Acylhydrazone Derivatives

    Directory of Open Access Journals (Sweden)

    Jialong Sun

    2015-03-01

    Full Text Available In this study a series of diacylhydrazine and acylhydrazone derivatives were designed and synthesized according to the method of active group combination and the principles of aromatic group bioisosterism. The structures of the novel derivatives were determined on the basis on 1H-NMR, IR and ESI-MS spectral data. All of the compounds were evaluated for their in vivo insecticidal activity against the third instar larvae of Spodoptera exigua Hiibner, Helicoverpa armigera Hubner, Plutella xyllostella Linnaeus and Pieris rapae Linne, respectively, at a concentration of 10 mg/L. The results showed that all of the derivatives displayed high insecticidal activity. Most of the compounds presented higher insecticidal activity against S. exigua than the reference compounds tebufenozide, metaflumizone and tolfenpyrad, and approximately identical insecticidal activity against H. armigera, P. xyllostella and P. rapae as the references metaflumizone and tolfenpyrad.

  9. Comparative studies of tripolyphosphate and glutaraldehyde cross-linked chitosan-botanical pesticide nanoparticles and their agricultural applications.

    Science.gov (United States)

    Gabriel Paulraj, Michael; Ignacimuthu, Savarimuthu; Gandhi, Munusamy Rajiv; Shajahan, Azeez; Ganesan, Pathalam; Packiam, Soosaimanickam Maria; Al-Dhabi, Naif Abdhullah

    2017-11-01

    A nanopesticide formulation was developed using chitosan and a botanical pesticide PONNEEM ® and its antifeedant, larvicidal and growth regulating activities were screened against Helicoverpa armigera, a major lepidopteran pest. Chitosan nanoparticles (CSNs) were prepared by using two different cross-linking agents namely glutaraldehyde (GLA) and tripolyphosphate (TPP). The effects of cross linking agents on CSNs and the biological properties against the insect pest were also studied. Cross linking of chitosan with either TPP or GLA was confirmed through Fourier Transform Infrared (FTIR) spectroscopy. Electron micrograph revealed that the size of CSNs varied from 32 to 90nm. The stability of nanoparticles lasted for 9days in CSNs-TPP-PONNEEM. In CSNs-GLA-PONNEEM, the stability of nanoparticles was higher. CSNs-TPP-PONNEEM treatment recorded 88.5% antifeedant activity and 90.2% larvicidal activity against H. armigera. Weights of H. armigera pupae in CSNs-TPP-PONNEEM treatment were significantly low. Chitosan-based nano-pesticide formulation holds great promise in H. armigera management. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. Biocontrol Potential of Steinernema thermophilum and Its Symbiont Xenorhabdus indica Against Lepidopteran Pests: Virulence to Egg and Larval Stages.

    Science.gov (United States)

    Kalia, Vinay; Sharma, Garima; Shapiro-Ilan, David I; Ganguly, Sudershan

    2014-03-01

    Under laboratory conditions, the biocontrol potential of Steinernema thermophilum was tested against eggs and larval stages of two important lepidopteran insect pests, Helicoverpa armigera and Spodoptera litura (polyphagous pests), as well as Galleria mellonella (used as a model host). In terms of host susceptibility of lepidopteran larvae to S. thermophilum, based on the LC50 36 hr after treatment, G. mellonella (LC50 = 16.28 IJ/larva) was found to be more susceptible than S. litura (LC50 = 85 IJ/larva), whereas neither host was found to be significantly different from H. armigera (LC50 = 54.68 IJ/larva). In addition to virulence to the larval stages, ovicidal activity up to 84% was observed at 200 IJ/50 and 100 eggs of H. armigera and S. litura, respectively. To our knowledge this is the first report of entomopathogenic nematode pathogenicity to lepidopteran eggs. Production of infective juvenile (IJ) nematodes/insect larva was also measured and found to be positively correlated with rate of IJ for H. armigera (r = 0.990), S. litura (r = 0.892), as well as G. mellonella (r = 0.834). Both Phase I and Phase II of symbiotic bacteria Xenorhabdus indica were tested separately against neonates of H. armigera and S. litura by feeding assays and found to be virulent to the target pests; phase variation did not affect the level of virulence. Thus S. thermophilum as well as the nematode's symbiotic bacteria applied separately have the potential to be developed as biocontrol agents for key lepidopteran pests.

  11. Inseticidas para o controle da traça-do-tomateiro e broca-grande e seu impacto sobre Trichogramma pretiosum Insecticides for the control of the South American tomato pinworm and the corn earworm and impact of those products on Trichogramma pretiosum

    Directory of Open Access Journals (Sweden)

    Marina Castelo Branco

    2003-12-01

    Full Text Available Experimentos de campo foram conduzidos entre maio e outubro de 2000 para determinar a eficiência de diversos inseticidas para o controle de Tuta absoluta e Helicoverpa zea e o impacto desses produtos sobre a emergência do parasitóide Trichogramma pretiosum. Os inseticidas testados, bem como as doses em g i.a./ha foram: metoxifenozide (120; 144, clorpirifós (540; 675, tiacloprid (72; 96 e triflumuron (144. O delineamento experimental foi de blocos ao acaso com oito tratamentos (inseticidas e testemunha e cinco repetições, com 40 plantas/parcela. Frutos de tomate foram coletados aos 58, 80 e 87 dias após o transplante das mudas para a determinação da percentagem de frutos danificados pelos insetos. O impacto dos inseticidas sobre T. pretiosum foi avaliado mediante a coleta de 20 ovos de H. zea por parcela aos 61 dias após o transplante, onde foi realizada a avaliação da emergência do parasitóide. Todos os inseticidas reduziram significativamente os danos causados por H. zea. Contudo, nenhum deles foi eficiente para o controle de T. absoluta. Metoxifenozide e clorpirifós (540 não reduziram significativamente o número de ovos parasitados por T. pretiosum quando comparados à testemunha.Field studies were conducted from May to October 2000 to determine the effectiveness of several insecticides in controlling Tuta absoluta and Helicoverpa zea and their impact on emergence of the parasitoid Trichogramma pretiosum. The insecticides tested were: methoxyfenozide (120; 144, clorpirifós (540; 675, tiacloprid (72; 96 and triflumuron (144. Application rates of all insecticides are expressed as g a.i./ha. The experiment was designed as randomized complete block with eight treatments (insecticides and untreated plots with five replications. Tomato fruits were harvested 58; 80 and 87 days after transplanting and the percentage of damaged fruits by both pests determined. The impact of insecticides on T. pretiosum survival was determined

  12. In-silico determination of insecticidal potential of Vip3Aa-Cry1Ac fusion protein against Lepidopteran targets using molecular docking

    Directory of Open Access Journals (Sweden)

    Aftab eAhmad

    2015-12-01

    Full Text Available Study and research of Bt (Bacillus thuringiensis transgenic plants have opened new ways to combat insect pests. Over the decades, however, insect pests, especially the Lepidopteran, have developed tolerance against Bt delta-endotoxins. Such issues can be addressed through the development of novel toxins with greater toxicity and affinity against a broad range of insect receptors. In this computational study, functional domains of Bacillus thuringiensis crystal delta-endotoxin (Cry1Ac insecticidal protein and vegetative insecticidal protein (Vip3Aa have been fused to develop a broad-range Vip3Aa-Cry1Ac fusion protein. Cry1Ac and Vip3Aa are non-homologous insecticidal proteins possessing receptors against different targets within the midgut of insects. The insecticidal proteins were fused to broaden the insecticidal activity. Molecular docking analysis of the fusion protein against aminopeptidase-N (APN and cadherin receptors of five Lepidopteran insects (Agrotis ipsilon, Helicoverpa armigera, Pectinophora gossypiella, Spodoptera exigua and Spodoptera litura revealed that the Ser290, Ser293, Leu337, Thr340 and Arg437 residues of the fusion protein are involved in the interaction with insect receptors. The Helicoverpa armigera cadherin receptor, however, showed no interaction, which might be due to either loss or burial of interactive residues inside the fusion protein. These findings revealed that the Vip3Aa-Cry1Ac fusion protein has a strong affinity against Lepidopteran insect receptors and hence has a potential to be an efficient broad-range insecticidal protein.

  13. in silico identification of cross affinity towards Cry1Ac pesticidal protein with receptor enzyme in Bos taurus and sequence, structure analysis of crystal proteins for stability.

    Science.gov (United States)

    Ebenezer, King Solomon; Nachimuthu, Ramesh; Thiagarajan, Prabha; Velu, Rajesh Kannan

    2013-01-01

    Any novel protein introduced into the GM crops need to be evaluated for cross affinity on living organisms. Many researchers are currently focusing on the impact of Bacillus thuringiensis cotton on soil and microbial diversity by field experiments. In spite of this, in silico approach might be helpful to elucidate the impact of cry genes. The crystal a protein which was produced by Bt at the time of sporulation has been used as a biological pesticide to target the insectivorous pests like Cry1Ac for Helicoverpa armigera and Cry2Ab for Spodoptera sp. and Heliothis sp. Here, we present the comprehensive in silico analysis of Cry1Ac and Cry2Ab proteins with available in silico tools, databases and docking servers. Molecular docking of Cry1Ac with procarboxypeptidase from Helicoverpa armigera and Cry1Ac with Leucine aminopeptidase from Bos taurus has showed the 125(th) amino acid position to be the preference site of Cry1Ac protein. The structures were compared with each other and it showed 5% of similarity. The cross affinity of this toxin that have confirmed the earlier reports of ill effects of Bt cotton consumed by cattle.

  14. Eficácia do indoxacarb para o controle de pragas em hortaliças Efficacy of indoxacarb in the control of vegetable pests

    Directory of Open Access Journals (Sweden)

    Samuel Martinelli

    2003-09-01

    Full Text Available A eficiência do indoxacarb foi avaliada no controle dos lepidópteros-pragas em hortaliças: Plutella xylostella (Lepidoptera: Yponeumatidae, Trichoplusia ni (Lepidoptera: Noctuidae, Neoleucinodes elegantalis (Lepidoptera: Pyralidae e Helicoverpa zea (Lepidoptera: Noctuidae. Os experimentos foram conduzidos em três locais diferentes nas culturas do repolho e tomate. Os inseticidas utilizados foram indoxacarb (no tomate de 2,4 a 6,0 g i.a./100 L e no repolho de 18 a 42 g i.a./ha, esfenvalerate (apenas no tomate de 1,75 g i.a./100 L, metomil (no tomate na dose de 21,5 g i.a./100 L e no repolho a 172 g i.a./ha, deltametrina (apenas no repolho na dose de 6 g i.a./ha e triflumuron (apenas no tomate na dose de 15 g i.a./100 L. Adotou-se o delineamento estatístico em blocos ao acaso com quatro repetições em todos os experimentos. Todas as doses avaliadas do produto indoxacarb apresentaram excelente desempenho no controle de P. xylostella e T. ni. Assim, a menor dose avaliada (18 g i.a./ha pode ser recomendada para o controle dessas pragas. Todos os produtos avaliados alcançaram níveis de eficiência maiores que 80% no controle de H. zea na cultura do tomate. Indoxacarb foi tão eficiente quanto o produto padrão adotado (triflumuron. N. elegantalis foi eficientemente controlada pelos inseticidas avaliados após nove aplicações, sendo que indoxacarb pode ser recomendado na menor dose utilizada (2,4 g i.a./100 L.The efficacy of indoxacarb was evaluated for controlling lepidopterous pests on vegetables: Plutella xylostella (Lepidoptera: Yponeumatidae, Trichoplusia ni (Lepidoptera: Noctuidae, Neoleucinodes elegantalis (Lepidoptera: Pyralidae, Helicoverpa zea (Lepidoptera: Noctuidae. The experiments were carried out at three different sites on cabbage and tomato crops. The utilized insecticides were indoxacarb (for tomato from 2.4 to 6.0 g a.i./100 L and for cabbage from 18 to 42 g i.a./ha, esfenvalerate (only for tomato at 1.75 g a.i./100 L

  15. Variasi Kebugaran Jenis/Strain Trichogramma pada Telur Plutella xylostella (L. (Lepidoptera: Plutellidae

    Directory of Open Access Journals (Sweden)

    Siti Herlinda

    2005-07-01

    Full Text Available Laboratory experiments were conducted to evaluate fitness traits of trichogrammatid species/strains reared on eggs of the diamondback moth, Plutella xylostella (L.. The experiments used eleven trichogrammatid species/strains collected from different host species and locations. They were Trichogrammatoidea cojuangcoi Nagaraja collected from parasitized P. xylostella eggs in Jarai, Muarasiban, Kerinjing, and Bogar, Trichogrammatoidea sp. A and B collected from parasitized Helicoverpa armigera (Hubner eggs in Bogor, Trichogrammatoidea armigera Nagaraja collected from parasitized H. armigera eggs in Bogor, Trichogramma chilonis Ishii, Trichogramma japanicum Ashmead, Trichogramma australicum Girault, and Trichogrammatoidea nana (Zehntner collected from parasitized Chilo sp. eggs in Cinta Manis, South Sumatera. When a female of Trichogramma was constantly exposed to 100 P. xylostella eggs per day throughout her lifetime, T. cojuangcoi from Jarai produced more parasitized host eggs (50.67% and progenies (50.67 adults/female compared to other species/strains. Sex ratio was predominantly female, the most female progenies were produced ( 38 adults/ female by T. cojuangcoi from Jarai. There were no significant differences in larval (0-3.27% and pupal (0-3.75% mortality of all species/strains. Survival emerging adults of T. japanicum (90.24% were significantly lower than those of other species/strains. These data showed that T. cojuangcoi from Jarai could be developed as biocontrol agents of P. xylostella.

  16. Complexity and variability of gut commensal microbiota in polyphagous lepidopteran larvae.

    Directory of Open Access Journals (Sweden)

    Xiaoshu Tang

    Full Text Available BACKGROUND: The gut of most insects harbours nonpathogenic microorganisms. Recent work suggests that gut microbiota not only provide nutrients, but also involve in the development and maintenance of the host immune system. However, the complexity, dynamics and types of interactions between the insect hosts and their gut microbiota are far from being well understood. METHODS/PRINCIPAL FINDINGS: To determine the composition of the gut microbiota of two lepidopteran pests, Spodoptera littoralis and Helicoverpa armigera, we applied cultivation-independent techniques based on 16S rRNA gene sequencing and microarray. The two insect species were very similar regarding high abundant bacterial families. Different bacteria colonize different niches within the gut. A core community, consisting of Enterococci, Lactobacilli, Clostridia, etc. was revealed in the insect larvae. These bacteria are constantly present in the digestion tract at relatively high frequency despite that developmental stage and diet had a great impact on shaping the bacterial communities. Some low-abundant species might become dominant upon loading external disturbances; the core community, however, did not change significantly. Clearly the insect gut selects for particular bacterial phylotypes. CONCLUSIONS: Because of their importance as agricultural pests, phytophagous Lepidopterans are widely used as experimental models in ecological and physiological studies. Our results demonstrated that a core microbial community exists in the insect gut, which may contribute to the host physiology. Host physiology and food, nevertheless, significantly influence some fringe bacterial species in the gut. The gut microbiota might also serve as a reservoir of microorganisms for ever-changing environments. Understanding these interactions might pave the way for developing novel pest control strategies.

  17. Early warning of cotton bollworm resistance associated with intensive planting of Bt cotton in China.

    Directory of Open Access Journals (Sweden)

    Haonan Zhang

    Full Text Available Transgenic crops producing Bacillus thuringiensis (Bt toxins kill some key insect pests, but evolution of resistance by pests can reduce their efficacy. The predominant strategy for delaying pest resistance to Bt crops requires refuges of non-Bt host plants to promote survival of susceptible pests. To delay pest resistance to transgenic cotton producing Bt toxin Cry1Ac, farmers in the United States and Australia planted refuges of non-Bt cotton, while farmers in China have relied on "natural" refuges of non-Bt host plants other than cotton. Here we report data from a 2010 survey showing field-evolved resistance to Cry1Ac of the major target pest, cotton bollworm (Helicoverpa armigera, in northern China. Laboratory bioassay results show that susceptibility to Cry1Ac was significantly lower in 13 field populations from northern China, where Bt cotton has been planted intensively, than in two populations from sites in northwestern China where exposure to Bt cotton has been limited. Susceptibility to Bt toxin Cry2Ab did not differ between northern and northwestern China, demonstrating that resistance to Cry1Ac did not cause cross-resistance to Cry2Ab, and implying that resistance to Cry1Ac in northern China is a specific adaptation caused by exposure to this toxin in Bt cotton. Despite the resistance detected in laboratory bioassays, control failures of Bt cotton have not been reported in China. This early warning may spur proactive countermeasures, including a switch to transgenic cotton producing two or more toxins distinct from Cry1A toxins.

  18. Two Year Field Study to Evaluate the Efficacy of Mamestra brassicae Nucleopolyhedrovirus Combined with Proteins Derived from Xestia c-nigrum Granulovirus

    Directory of Open Access Journals (Sweden)

    Chie Goto

    2015-03-01

    Full Text Available Japan has only three registered baculovirus biopesticides despite its long history of studies on insect viruses. High production cost is one of the main hindrances for practical use of baculoviruses. Enhancement of insecticidal effect is one possible way to overcome this problem, so there have been many attempts to develop additives for baculoviruses. We found that alkaline soluble proteins of capsules (GVPs of Xestia c-nigrum granulovirus can increase infectivity of some viruses including Mamestra brassicae nucleopolyhedrovirus (MabrNPV, and previously reported that MabrNPV mixed with GVPs was highly infectious to three important noctuid pests of vegetables in the following order, Helicoverpa armigera, M. brassicae, and Autographa nigrisigna. In this study, small-plot experiments were performed to assess concentrations of MabrNPV and GVPs at three cabbage fields and a broccoli field for the control of M. brassicae. In the first experiment, addition of GVPs (10 µg/mL to MabrNPV at 106 OBs/mL resulted in a significant increase in NPV infection (from 53% to 66%. In the second experiment, the enhancing effect of GVP on NPV infection was confirmed at 10-times lower concentrations of MabrNPV. In the third and fourth experiments, a 50% reduction in GVPs (from 10 µg/mL to 5 µg/mL did not result in a lowering of infectivity of the formulations containing MabrNPV at 105 OBs/mL. These results indicate that GVPs are promising additives for virus insecticides.

  19. Non-recessive Bt toxin resistance conferred by an intracellular cadherin mutation in field-selected populations of cotton bollworm.

    Directory of Open Access Journals (Sweden)

    Haonan Zhang

    Full Text Available Transgenic crops producing Bacillus thuringiensis (Bt toxins have been planted widely to control insect pests, yet evolution of resistance by the pests can reduce the benefits of this approach. Recessive mutations in the extracellular domain of toxin-binding cadherin proteins that confer resistance to Bt toxin Cry1Ac by disrupting toxin binding have been reported previously in three major lepidopteran pests, including the cotton bollworm, Helicoverpa armigera. Here we report a novel allele from cotton bollworm with a deletion in the intracellular domain of cadherin that is genetically linked with non-recessive resistance to Cry1Ac. We discovered this allele in each of three field-selected populations we screened from northern China where Bt cotton producing Cry1Ac has been grown intensively. We expressed four types of cadherin alleles in heterologous cell cultures: susceptible, resistant with the intracellular domain mutation, and two complementary chimeric alleles with and without the mutation. Cells transfected with each of the four cadherin alleles bound Cry1Ac and were killed by Cry1Ac. However, relative to cells transfected with either the susceptible allele or the chimeric allele lacking the intracellular domain mutation, cells transfected with the resistant allele or the chimeric allele containing the intracellular domain mutation were less susceptible to Cry1Ac. These results suggest that the intracellular domain of cadherin is involved in post-binding events that affect toxicity of Cry1Ac. This evidence is consistent with the vital role of the intracellular region of cadherin proposed by the cell signaling model of the mode of action of Bt toxins. Considered together with previously reported data, the results suggest that both pore formation and cell signaling pathways contribute to the efficacy of Bt toxins.

  20. Increased frequency of pink bollworm resistance to Bt toxin Cry1Ac in China.

    Directory of Open Access Journals (Sweden)

    Peng Wan

    Full Text Available Transgenic crops producing insecticidal proteins from Bacillus thuringiensis (Bt kill some key insect pests, but evolution of resistance by pests can reduce their efficacy. The main approach for delaying pest adaptation to Bt crops uses non-Bt host plants as "refuges" to increase survival of susceptible pests. To delay evolution of pest resistance to transgenic cotton producing Bt toxin Cry1Ac, the United States and some other countries have required refuges of non-Bt cotton, while farmers in China have relied on "natural" refuges of non-Bt host plants other than cotton. The "natural" refuge strategy focuses on cotton bollworm (Helicoverpa armigera, the primary target of Bt cotton in China that attacks many crops, but it does not apply to another major pest, pink bollworm (Pectinophora gossypiella, which feeds almost entirely on cotton in China. Here we report data showing field-evolved resistance to Cry1Ac by pink bollworm in the Yangtze River Valley of China. Laboratory bioassay data from 51 field-derived strains show that the susceptibility to Cry1Ac was significantly lower during 2008 to 2010 than 2005 to 2007. The percentage of field populations yielding one or more survivors at a diagnostic concentration of Cry1Ac increased from 0% in 2005-2007 to 56% in 2008-2010. However, the median survival at the diagnostic concentration was only 1.6% from 2008 to 2010 and failure of Bt cotton to control pink bollworm has not been reported in China. The early detection of resistance reported here may promote proactive countermeasures, such as a switch to transgenic cotton producing toxins distinct from Cry1A toxins, increased planting of non-Bt cotton, and integration of other management tactics together with Bt cotton.

  1. Laboratory Assessment on Virulence of Nomuraea rileyi against Noctuid Larvae%莱氏野村菌对夜蛾科害虫防治潜力的室内评测

    Institute of Scientific and Technical Information of China (English)

    周立峰; 于士军; 刘元兵; 王滨

    2012-01-01

    本文用喷雾法测定了5株莱氏野村菌Nomuraea rileyi对棉铃虫Helicoverpa armigera、甜菜夜蛾Spodoptera exigua和斜纹夜蛾Spodoptera litura 3种夜蛾科害虫的致病力。配制孢子悬浮液对3种夜蛾科害虫进行雾化接种,孢子附着量为188.9~4048.3孢子.mm 2。接种后幼虫置于(24±1)℃和12L∶12D条件下人工饲料饲养,每天观察直至化蛹。时间-剂量-死亡率模型分析显示:5株莱氏野村菌菌株接种量为188.9~4048.3孢子.mm 2时,斜纹夜蛾第10 d的侵染率为60%~95%;菌株Nr15对斜纹夜蛾显示出极高的毒力水平(LC50=266.7孢子.mm 2,4048.3孢子.mm 2浓度下的LT50=5.81 d),第10 d的侵染率达95%。供试菌株对棉铃虫和甜菜夜蛾的致病力相对较弱,侵染率均不足50%。研究表明,莱氏野村菌菌株对夜蛾科害虫体现出明显的寄主专化性,且有明显的量效关系。%In the current study,a laboratory bioassay was developed to measure the pathogenicities of five Nomuraea rileyi strains against Helicoverpa armigera,Spodoptera exigua and Spodoptera litura of noctuid larvae.The larvae were inoculated with conidia suspensions of N.rileyi at concentrations of 188.9 4048.3 conidia.mm 2 by a Potter Spray Tower,with 0.05% Tween-80 as control.After inoculation,the larvae were individually fed on artificial diet in plastic boxes at(24±1) ℃ and 12L:12D until pupated.Time-dose-mortality model was used to analyze the effect and indicated that the 5 fungal strains could kill 60% 95% of S.litura larvae at concentrations of 188.9 4048.3 conidia.mm 2within 10 d after conidia inoculation.Strain Nr15 demonstrated high virulence to S.litura larvae with a LC50value of 266.7 conidia.mm 2and a LT50value of 5.81 d at the concentration of 4048.3 conidia.mm 2,whereas mortalities of H.armigera and S.exigua didn’t reached 50%.The difference of mortality and fungal infection indicated that there is a host-specificity of N.rileyi strains to noctuid

  2. Use of natural enemies and biorational pest control of corne

    Directory of Open Access Journals (Sweden)

    Cipriano García Gutiérrez

    2012-09-01

    Full Text Available A general analysis of the potential use of natural enemies and biorational insecticides for control of main pests of corn in thestate of Sinaloa is presented. A discuss on their composition, dosage, toxicity and type of effect on beneficial organisms(natural enemies and pollinators is too included. The work revealed that is possible implement the use of these natural enemies and products for the control of neonate larvae of Spodoptera frugiperda fall armyworm (J. E Smith with Nomuraea rileyi (Farlow (Samson; against thrips Frankliniella occidentalis (Pergande using the nematodes Steinernema riobravis (Cabanillas and Poinar, S. feltiae (Filipjev and Heterorhabditis bacteriophora (Poinar at doses of 10,000 IJ (4x10 ~ IJ/m; against the corn silk fly Euxesta stigmatias (Loew encouraging the natural parasitism of Spalangia sp., while for the cutworm Agrotis ipsilon (Hufnagel can be with spinosad (soluble concentrate at doses of 0.123 kg a. i, and to the corn earwormHelicoverpa zea (Boddie using the analog of methoxyfenozide molting hormone (24% at 144 mg of a. i/L. The biorational control agents that not affect significantly to the natural enemies were the nucleopoliedrosis virus SfMNPV and SeMNPV; N. rileyi and Isaria fumosorosea (Wize; Bacillus thuringiensis (Berlinier; the azadirachtin (neem and parasitoids. In the case of products of chemical synthesis: Spinosad, oxymatrine and bifenthrin showed high rates of mortality in the control of corn pests, so these are considered as of high and moderate risk to Aphis mellifera (L. bees, the methoxyfenozide presented relatively low toxicity to natural enemies. In general, biorational products have repellent effect on larvae and adults of these insects, inhibit feeding and induce molting, also causing deformities and impede the development and growth, too interfere with sexual intercourse and copulate, reducing the oviposition, as well as cause sterility of adults, so these may also constitute a risk to

  3. Ensacamento de frutos do tomateiro visando ao controle de pragas e à redução de defensivos Paper bags for pest control and pesticide use reduction on tomato fruits

    Directory of Open Access Journals (Sweden)

    Alexandre Luis Jordão

    2002-06-01

    Full Text Available O ensacamento de frutos durante o seu desenvolvimento na planta, além do objetivo de controlar pragas pode reduzir resíduos de defensivos e manejar aspectos qualitativos. Com o objetivo de controle das pragas Neoleucinodes elegantalis, Helicoverpa zea e Tuta absoluta e redução de resíduos de inseticidas, pencas de tomates, foram ensacadas com papel-manteiga. Além do efeito do ensacamento, foram testados dois repelentes de insetos. Foram realizados cinco tratamentos. A eficiência do ensacamento e dos repelentes foi verificada por meio do número médio de lagartas encontradas por tratamento. A quantidade de resíduo de metamidofós encontrada nos frutos ensacados e nos frutos expostos diretamente à pulverização foi comparada ao limite máximo permitido. Verificou-se, também, a qualidade dos frutos produzidos pelo método do ensacamento através de análises físico-químicas dos tomates. Os custos do método do ensacamento foram comparados aos do método químico. O ensacamento, associado ou não aos repelentes, reduz o ataque das lagartas N. elegantalis e H. zea aos frutos. Para o controle de T. absoluta é necessária a integração com controle químico nas épocas de maior infestação. Os frutos não ensacados possuíam quantidade de metamidofós seis vezes superiores ao máximo tolerado e os frutos ensacados quantidade três vezes inferiores a este limite. O ensacamento das pencas de tomates não modificou os parâmetros físico-químicos dos frutos produzidos. O método do ensacamento requer maior investimento econômico, porém esse investimento atinge um mercado diferencial, com preços mais elevados.The development of fruits in paper bags aims at the control of pests, reduction of pesticide residues and the management of qualitative aspects. This work evaluates the efficacy of paper bags in combination with deodorant tablets and garlic clove on the control of the pest agents Neoleucinodes elegantalis, Helicoverpa zea and Tuta

  4. Анализ этологических и репродуктивных особенностей и динамики развития популяции Heliothis armigera на протяжении сезона

    Directory of Open Access Journals (Sweden)

    Валерия КЕПТИНАРЬ

    2017-06-01

    Full Text Available Information on the fertility of female cotton bollworms and the viability of their laid eggs makes it possible to predict the number of next generation in the crop fields and the harm that this population may cause to the harvest. During the vegetative season of 2016 (the 1st decade of May - the 3rd decade of September, a seasonal monitoring of the Heliothis armigera pest population was carried out using a light trap installed in the immediate vicinity of a soybean field. Due to the conducted research, the emergence and peaks of the cotton bollworm flight were recorded, sex ratio wes determined, as well as reproductive and copulative potential of females were estimated. It was established that in the climatic conditions of the Republic of Moldova, Heliothis armigera pest develops in three generations. The duration of generation development is from the 3rd decade of May to the 3rd decade of September. Male-female ratio was 58% males to 42% females. The copulative and reproductive potential of this pest depends on the succession of generations. The reproductive potential of the first generation was 37.8%, 40.1% for the second generation and 22.1% for the third generation. The copulative potential of H. armigera females was of 65.0% paired 1-2 times and only 35.0% were paired 3-5 times. Реферат. Сведения о плодовитости самок хлопковой совки и жизнеспособности отложенных ими яиц предоставляет возможность прогнозировать численность последующего поколения на участках сельскохозяйственных культур и ту опасность, которую эта популяция нанесет урожаю. На протяжении вегетативного сезона 2016 года (Iдекада мая – III декада сентября был проведен

  5. Screening of broad spectrum natural pesticides against conserved target arginine kinase in cotton pests by molecular modeling.

    Science.gov (United States)

    Sakthivel, Seethalakshmi; Habeeb, S K M; Raman, Chandrasekar

    2018-03-12

    Cotton is an economically important crop and its production is challenged by the diversity of pests and related insecticide resistance. Identification of the conserved target across the cotton pest will help to design broad spectrum insecticide. In this study, we have identified conserved sequences by Expressed Sequence Tag profiling from three cotton pests namely Aphis gossypii, Helicoverpa armigera, and Spodoptera exigua. One target protein arginine kinase having a key role in insect physiology and energy metabolism was studied further using homology modeling, virtual screening, molecular docking, and molecular dynamics simulation to identify potential biopesticide compounds from the Zinc natural database. We have identified four compounds having excellent inhibitor potential against the identified broad spectrum target which are highly specific to invertebrates.

  6. Design, Synthesis and Insecticidal Activity of Novel Phenylurea Derivatives

    Directory of Open Access Journals (Sweden)

    Jialong Sun

    2015-03-01

    Full Text Available A series of novel phenylurea derivatives were designed and synthesized according to the method of active groups linkage and the principle of aromatic groups bioisosterism in this study. The structures of the novel phenylurea derivatives were confirmed based on ESI-MS, IR and 1H-NMR spectral data. All of the compounds were evaluated for the insecticidal activity against the third instars larvae of Spodoptera exigua Hiibner, Plutella xyllostella Linnaeus, Helicoverpa armigera Hubner and Pieris rapae Linne respectively, at the concentration of 10 mg/L. The results showed that all of the derivatives displayed strong insecticidal activity. Most of the compounds presented higher insecticidal activity against S. exigua than the reference compounds tebufenozide, chlorbenzuron and metaflumizone. Among the synthesized compounds, 3b, 3d, 3f, 4b and 4g displayed broad spectrum insecticidal activity.

  7. Reduced levels of membrane-bound alkaline phosphatase are common to lepidopteran strains resistant to Cry toxins from Bacillus thuringiensis.

    Directory of Open Access Journals (Sweden)

    Juan Luis Jurat-Fuentes

    Full Text Available Development of insect resistance is one of the main concerns with the use of transgenic crops expressing Cry toxins from the bacterium Bacillus thuringiensis. Identification of biomarkers would assist in the development of sensitive DNA-based methods to monitor evolution of resistance to Bt toxins in natural populations. We report on the proteomic and genomic detection of reduced levels of midgut membrane-bound alkaline phosphatase (mALP as a common feature in strains of Cry-resistant Heliothis virescens, Helicoverpa armigera and Spodoptera frugiperda when compared to susceptible larvae. Reduced levels of H. virescens mALP protein (HvmALP were detected by two dimensional differential in-gel electrophoresis (2D-DIGE analysis in Cry-resistant compared to susceptible larvae, further supported by alkaline phosphatase activity assays and Western blotting. Through quantitative real-time polymerase chain reaction (qRT-PCR we demonstrate that the reduction in HvmALP protein levels in resistant larvae are the result of reduced transcript amounts. Similar reductions in ALP activity and mALP transcript levels were also detected for a Cry1Ac-resistant strain of H. armigera and field-derived strains of S. frugiperda resistant to Cry1Fa. Considering the unique resistance and cross-resistance phenotypes of the insect strains used in this work, our data suggest that reduced mALP expression should be targeted for development of effective biomarkers for resistance to Cry toxins in lepidopteran pests.

  8. Feeding behaviour of generalist pests on Brassica juncea: implication for manipulation of glucosinolate biosynthesis pathway for enhanced resistance.

    Science.gov (United States)

    Kumar, Pawan; Augustine, Rehna; Singh, Amarjeet Kumar; Bisht, Naveen C

    2017-10-01

    Differential accumulation of plant defence metabolites has been suggested to have important ecological consequence in the context of plant-insect interactions. Feeding of generalist pests on Brassica juncea showed a distinct pattern with selective exclusion of leaf margins which are high in glucosinolates. Molecular basis of this differential accumulation of glucosinolates could be explained based on differential expression profile of BjuMYB28 homologues, the major biosynthetic regulators of aliphatic glucosinolates, as evident from quantitative real-time PCR and promoter:GUS fusion studies in allotetraploid B. juncea. Constitutive overexpression of selected BjuMYB28 homologues enhanced accumulation of aliphatic glucosinolates in B. juncea. Performance of two generalist pests, Helicoverpa armigera and Spodoptera litura larvae, on transgenic B. juncea plants were poor compared to wild-type plants in a no-choice experiment. Correlation coefficient analysis suggested that weight gain of H. armigera larvae was negatively correlated with gluconapin (GNA) and glucobrassicanapin (GBN), whereas that of S. litura larvae was negatively correlated with GNA, GBN and sinigrin (SIN). Our study explains the significance and possible molecular basis of differential distribution of glucosinolates in B. juncea leaves and shows the potential of overexpressing BjuMYB28 for enhanced resistance of Brassica crops against the tested generalist pests. © 2017 John Wiley & Sons Ltd.

  9. Ignoring the irrelevant: auditory tolerance of audible but innocuous sounds in the bat-detecting ears of moths

    Science.gov (United States)

    Fullard, James H.; Ratcliffe, John M.; Jacobs, David S.

    2008-03-01

    Noctuid moths listen for the echolocation calls of hunting bats and respond to these predator cues with evasive flight. The African bollworm moth, Helicoverpa armigera, feeds at flowers near intensely singing cicadas, Platypleura capensis, yet does not avoid them. We determined that the moth can hear the cicada by observing that both of its auditory receptors (A1 and A2 cells) respond to the cicada’s song. The firing response of the A1 cell rapidly adapts to the song and develops spike periods in less than a second that are in excess of those reported to elicit avoidance flight to bats in earlier studies. The possibility also exists that for at least part of the day, sensory input in the form of olfaction or vision overrides the moth’s auditory responses. While auditory tolerance appears to allow H. armigera to exploit a food resource in close proximity to acoustic interference, it may render their hearing defence ineffective and make them vulnerable to predation by bats during the evening when cicadas continue to sing. Our study describes the first field observation of an eared insect ignoring audible but innocuous sounds.

  10. Conserved chemosensory proteins in the proboscis and eyes of Lepidoptera.

    Science.gov (United States)

    Zhu, Jiao; Iovinella, Immacolata; Dani, Francesca Romana; Liu, Yu-Ling; Huang, Ling-Qiao; Liu, Yang; Wang, Chen-Zhu; Pelosi, Paolo; Wang, Guirong

    2016-01-01

    Odorant-binding proteins (OBPs) and chemosensory proteins (CSPs) are endowed with several different functions besides being carriers for pheromones and odorants. Based on a previous report of a CSP acting as surfactant in the proboscis of the moth Helicoverpa armigera , we revealed the presence of orthologue proteins in two other moths Plutella xylostella and Chilo suppressalis , as well as two butterflies Papilio machaon and Pieris rapae , using immunodetection and proteomic analysis. The unusual conservation of these proteins across large phylogenetic distances indicated a common specific function for these CSPs. This fact prompted us to search for other functions of these proteins and discovered that CSPs are abundantly expressed in the eyes of H. armigera and possibly involved as carriers for carotenoids and visual pigments. This hypothesis is supported by ligand-binding experiments and docking simulations with retinol and β-carotene. This last orange pigment, occurring in many fruits and vegetables, is an antioxidant and the precursor of visual pigments. We propose that structurally related CSPs solubilise nutritionally important carotenoids in the proboscis, while they act as carriers of both β-carotene and its derived products 3-hydroxyretinol and 3-hydroxyretinal in the eye. The use of soluble olfactory proteins, such as CSPs, as carriers for visual pigments in insects, here reported for the first time, parallels the function of retinol-binding protein in vertebrates, a lipocalin structurally related to vertebrate odorant-binding proteins.

  11. Baseline sensitivity of lepidopteran corn pests in India to Cry1Ab insecticidal protein of Bacillus thuringiensis.

    Science.gov (United States)

    Jalali, Sushil K; Lalitha, Yadavalli; Kamath, Subray P; Mohan, Komarlingam S; Head, Graham P

    2010-08-01

    Genetically engineered corn (Bt corn) expressing Bacillus thuringiensis Berliner insecticidal protein Cry1Ab is a biotechnological option being considered for management of lepidopteran corn pests in India. As a resistance management practice it was essential to determine the sensitivity of multiple populations of the stalk borer Chilo partellus (Swinhoe), pink borer Sesamia inferens (Walker) and the cob borer Helicoverpa armigera (Hübner) to Cry1Ab protein through bioassays. The insect populations were collected during growing seasons of Rabi 2005 (October 2005 to February 2006) and Kharif 2006 (May to September 2006). Multiple populations of the three lepidopteran corn pests were found to be susceptible to Cry1Ab. Median lethal concentrations (LC(50)) ranged between 0.008 and 0.068 microg Cry1Ab mL(-1) diet for 18 populations of C. partellus (across two seasons), between 0.12 and 1.99 microg mL(-1) for seven populations of H. armigera and between 0.46 and 0.56 microg mL(-1) for two populations of S. inferens. Dose-response concentrations for lethality and growth inhibition have been determined to mark baseline sensitivity of multiple populations of key lepidopteran corn pests in India to Cry1Ab protein. These benchmark values will be referenced while monitoring resistance to Cry1Ab should Bt corn hybrids expressing Cry1Ab be approved for commercial cultivation in India. Copyright (c) 2010 Society of Chemical Industry.

  12. Weakening density dependence from climate change and agricultural intensification triggers pest outbreaks: a 37-year observation of cotton bollworms.

    Science.gov (United States)

    Ouyang, Fang; Hui, Cang; Ge, Saiying; Men, Xin-Yuan; Zhao, Zi-Hua; Shi, Pei-Jian; Zhang, Yong-Sheng; Li, Bai-Lian

    2014-09-01

    Understanding drivers of population fluctuation, especially for agricultural pests, is central to the provision of agro-ecosystem services. Here, we examine the role of endogenous density dependence and exogenous factors of climate and human activity in regulating the 37-year population dynamics of an important agricultural insect pest, the cotton bollworm (Helicoverpa armigera), in North China from 1975 to 2011. Quantitative time-series analysis provided strong evidence explaining long-term population dynamics of the cotton bollworm and its driving factors. Rising temperature and declining rainfall exacerbated the effect of agricultural intensification on continuously weakening the negative density dependence in regulating the population dynamics of cotton bollworms. Consequently, ongoing climate change and agricultural intensification unleashed the tightly regulated pest population and triggered the regional outbreak of H. armigera in 1992. Although the negative density dependence can effectively regulate the population change rate to fluctuate around zero at stable equilibrium levels before and after outbreak in the 1992, the population equilibrium jumped to a higher density level with apparently larger amplitudes after the outbreak. The results highlight the possibility for exogenous factors to induce pest outbreaks and alter the population regulating mechanism of negative density dependence and, thus, the stable equilibrium of the pest population, often to a higher level, posing considerable risks to the provision of agro-ecosystem services and regional food security. Efficient and timely measures of pest management in the era of Anthropocene should target the strengthening and revival of weakening density dependence caused by climate change and human activities.

  13. Controllable circuit

    DEFF Research Database (Denmark)

    2010-01-01

    A switch-mode power circuit comprises a controllable element and a control unit. The controllable element is configured to control a current in response to a control signal supplied to the controllable element. The control unit is connected to the controllable element and provides the control...

  14. Control rod control device

    International Nuclear Information System (INIS)

    Seiji, Takehiko; Obara, Kohei; Yanagihashi, Kazumi

    1998-01-01

    The present invention provides a device suitable for switching of electric motors for driving each of control rods in a nuclear reactor. Namely, in a control rod controlling device, a plurality of previously allotted electric motors connected in parallel as groups, and electric motors of any selected group are driven. In this case, a voltage of not driving predetermined selected electric motors is at first applied. In this state an electric current supplied to the circuit of predetermined electric motors is detected. Whether integration or failure of a power source and the circuit of the predetermined electric motors are normal or not is judged by the detected electric current supplied. After they are judged normal, the electric motors are driven by a regular voltage. With such procedures, whether the selected circuit is normal or not can be accurately confirmed previously. Since the electric motors are not driven just at the selected time, the control rods are not operated erroneously. (I.S.)

  15. Management of lepidopterans through irradiations

    International Nuclear Information System (INIS)

    Bhati, Dheeraj; Parvez, Asif; Kausar, Hina; Srivastava, Meera

    2012-01-01

    suppression by irradiation include Spodoptera litura, S.exigua, S.frugiperda, Helicoverpa armigera, H.zea, Pectinophora gossypiella, Diatraea saccharalis, Cydia pomonella, C.molesta, Ectomyelois ceratoniae, Ephestia kuehniella, Crocidolomia binotalis, Chilo suppressalis, Ostrinia furnacalis, O.nubilalis, Plutella xylostella and Spilosoma obliqua. (author)

  16. Control Areas

    Data.gov (United States)

    Department of Homeland Security — This feature class represents electric power Control Areas. Control Areas, also known as Balancing Authority Areas, are controlled by Balancing Authorities, who are...

  17. Control of control charts

    NARCIS (Netherlands)

    Sri Nurdiati, S.N.

    2005-01-01

    Although the Shewhart chart is widely used in practice because of its simplicity, applying this control chart to monitor the mean of a process may lead to two types of problems. The first concerns the typically unknown parameters involved in the distribution, while the second concerns the validity

  18. Functional Analysis of Polyphenol Oxidases by Antisense/Sense Technology

    Directory of Open Access Journals (Sweden)

    Jutharat Attajarusit

    2007-07-01

    Full Text Available Polyphenol oxidases (PPOs catalyze the oxidation of phenolics to quinones, the secondary reactions of which lead to oxidative browning and postharvest losses of many fruits and vegetables. PPOs are ubiquitous in angiosperms, are inducible by both biotic and abiotic stresses, and have been implicated in several physiological processes including plant defense against pathogens and insects, the Mehler reaction, photoreduction of molecular oxygen by PSI, regulation of plastidic oxygen levels, aurone biosynthesis and the phenylpropanoid pathway. Here we review experiments in which the roles of PPO in disease and insect resistance as well as in the Mehler reaction were investigated using transgenic tomato (Lycopersicon esculentum plants with modified PPO expression levels (suppressed PPO and overexpressing PPO. These transgenic plants showed normal growth, development and reproduction under laboratory, growth chamber and greenhouse conditions. Antisense PPO expression dramatically increased susceptibility while PPO overexpression increased resistance of tomato plants to Pseudomonas syringae. Similarly, PPO-overexpressing transgenic plants showed an increase in resistance to various insects, including common cutworm (Spodoptera litura (F., cotton bollworm (Helicoverpa armigera (Hübner and beet army worm (Spodoptera exigua (Hübner, whereas larvae feeding on plants with suppressed PPO activity had higher larval growth rates and consumed more foliage. Similar increases in weight gain, foliage consumption, and survival were also observed with Colorado potato beetles (Leptinotarsa decemlineata (Say feeding on antisense PPO transgenic tomatoes. The putative defensive mechanisms conferred by PPO and its interaction with other defense proteins are discussed. In addition, transgenic plants with suppressed PPO exhibited more favorable water relations and decreased photoinhibition compared to nontransformed controls and transgenic plants

  19. LANDSCAPE CHANGES IN A LOWLAND IN BENIN: ECOLOGICAL IMPACT ON PESTS AND NATURAL ENEMIES.

    Science.gov (United States)

    Boucher, A; Silvie, P; Menozzi, P; Adda, C; Auzoux, S; Jean, J; Huat, J

    2015-01-01

    Habitat management involving conservative biological control could be a good crop pest management option in poor African countries. A survey was conducted from August 2013 to July 2014 in a rainfed lowland region near Pélébina, northern Benin, in order to characterize spatiotemporal landscape changes and investigate their influence on the main crop pests and their associated natural enemies. The area was mapped mainly regarding crop fields and fallows. Visual observations were recorded and a database was compiled. Major landscape composition changes were noted between rainy and dry seasons, which affected the presence of both pests and natural enemies. Cereals (rice, maize and sorghum) and cotton were grown in the humid season, and then okra (Abelmoschus esculentus) was the dominant vegetable crop in dry season. These modifications impacted fallow abundance throughout the lowland. Different cotton (e.g. Helicoverpa armigera, Dysdercus sp., Zonocerus variegatus) or rice (e.g. Diopsis longicornis, D. apicalis) pests were observed during dry season in okra crops. Dry season surveys of Poaceae in two types of fallows ('humid', 'dry') revealed the presence of very few stem borers: only 0.04% of stems sampled were infested by stem borers, with a mean of 1.13 larvae per stem. Known cereal stem borer species such as Busseola fusco, Coniesta ignefusalis, Sesamia calamistis were not clearly identified among these larvae because of their diapausing stage and white color. Unexpected pollinators (Hymenoptera Apidae, genus Braunsapis, Ceratina and Xylocopa) and predators (Crabronidae, genus Dasyproctus) were found in the stems. Sweep-net collection of insects in humid fallows allowed us to describe for the first time in Benin seven Diopsidae species (23% of adults bearing Laboulbeniomycetes ectoparasitic fungi). Some of these species were captured in rice fields during rainy season. Parasitoids (adult Chalcidoidae and Ichneumonoidae) were observed during both seasons but their

  20. Dream controller

    Science.gov (United States)

    Cheng, George Shu-Xing; Mulkey, Steven L; Wang, Qiang; Chow, Andrew J

    2013-11-26

    A method and apparatus for intelligently controlling continuous process variables. A Dream Controller comprises an Intelligent Engine mechanism and a number of Model-Free Adaptive (MFA) controllers, each of which is suitable to control a process with specific behaviors. The Intelligent Engine can automatically select the appropriate MFA controller and its parameters so that the Dream Controller can be easily used by people with limited control experience and those who do not have the time to commission, tune, and maintain automatic controllers.

  1. Controllable dose; Dosis controlable

    Energy Technology Data Exchange (ETDEWEB)

    Alvarez R, J T; Anaya M, R A [ININ, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    2004-07-01

    With the purpose of eliminating the controversy about the lineal hypothesis without threshold which found the systems of dose limitation of the recommendations of ICRP 26 and 60, at the end of last decade R. Clarke president of the ICRP proposed the concept of Controllable Dose: as the dose or dose sum that an individual receives from a particular source which can be reasonably controllable by means of any means; said concept proposes a change in the philosophy of the radiological protection of its concern by social approaches to an individual focus. In this work a panorama of the foundations is presented, convenient and inconveniences that this proposal has loosened in the international community of the radiological protection, with the purpose of to familiarize to our Mexican community in radiological protection with these new concepts. (Author)

  2. Mosquito Control

    Science.gov (United States)

    ... Labs and Research Centers Contact Us Share Mosquito Control About Mosquitoes General Information Life Cycle Information from ... Repellent that is Right for You DEET Mosquito Control Methods Success in mosquito control: an integrated approach ...

  3. Birth Control

    Science.gov (United States)

    Birth control, also known as contraception, is designed to prevent pregnancy. Birth control methods may work in a number of different ... eggs that could be fertilized. Types include birth control pills, patches, shots, vaginal rings, and emergency contraceptive ...

  4. Cytogenetic estimation of inheritable partial sterility induced by γ-radiation in bollworm heliothis armigera hubn

    International Nuclear Information System (INIS)

    Sajfutdinov, B.N.

    1989-01-01

    Translocations have bveen counted in meiosis of the progeny of bollworm moths γ-irradiatied with doses of 50, 75 and 100 Gy: they amounted to 0.53, 1.93 and 4.02 per insect, and frequency of the insects with translocations to 0.44, 0.88 and 0.98, respectively

  5. Neurofuzzy Control

    DEFF Research Database (Denmark)

    Jantzen, Jan

    1997-01-01

    These notes are for a course in fuzzy control and neural networks. By neural networks we more precisely mean neurofuzzy systems rather than pure neural network theory. The notes are an extension to the existing notes on fuzzy control (Jantzen, Fuzzy Control, 1994).......These notes are for a course in fuzzy control and neural networks. By neural networks we more precisely mean neurofuzzy systems rather than pure neural network theory. The notes are an extension to the existing notes on fuzzy control (Jantzen, Fuzzy Control, 1994)....

  6. Control rod position control device

    International Nuclear Information System (INIS)

    Ubukata, Shinji.

    1997-01-01

    The present invention provides a control rod position control device which stores data such as of position signals and driving control rod instruction before and after occurrence of abnormality in control for the control rod position for controlling reactor power and utilized the data effectively for investigating the cause of abnormality. Namely, a plurality of individual control devices have an operation mismatching detection circuit for outputting signals when difference is caused between a driving instruction given to the control rod position control device and the control rod driving means and signals from a detection means for detecting an actual moving amount. A general control device collectively controls the individual control devices. In addition, there is also disposed a position storing circuit for storing position signals at least before and after the occurrence of the control rod operation mismatching. With such procedures, the cause of the abnormality can be determined based on the position signals before and after the occurrence of control rod mismatching operation stored in the position storing circuit. Accordingly, the abnormality cause can be determined to conduct restoration in an early stage. (I.S.)

  7. Control rods

    International Nuclear Information System (INIS)

    Maruyama, Hiromi.

    1984-01-01

    Purpose: To realize effective utilization, cost reduction and weight reduction in neutron absorbing materials. Constitution: Residual amount of neutron absorbing material is averaged between the top end region and other regions of a control rod upon reaching to the control rod working life, by using a single kind of neutron absorbing material and increasing the amount of the neutron absorber material at the top end region of the control rod as compared with that in the other regions. Further, in a case of a control rod having control rod blades such as in a cross-like control rod, the amount of the neutron absorbing material is decreased in the middle portion than in the both end portions of the control rod blade along the transversal direction of the rod, so that the residual amount of the neutron absorbing material is balanced between the central region and both end regions upon reaching the working life of the control rod. (Yoshihara, H.)

  8. Essential oils-oriented fenvalerate analogues: syntheses, characterization and biological evaluation

    International Nuclear Information System (INIS)

    Su, H.; Li, H.

    2016-01-01

    A series of essential oils oriented ester derivatives have been designed, synthesized and characterized based on the skeleton of fenvalerate. The preliminary bioassay results indicated that some of the newly synthesized compounds showed better insecticidal activities against Pyrausta nubilalis and Heliothis armigera than that of the control trans-prallethrin chloride. (author)

  9. Control apparatus

    International Nuclear Information System (INIS)

    Doll, D.W.

    1977-01-01

    A nuclear reactor system is described in which flexible control rods are used to enable insertion of the control rods into guide holes in the core which are distributed over an area larger than the cross section of the control rod penetration in the reactor pressure vessel. Guide tubes extend from the penetration and fan out to the guide holes for guiding the control rods from the penetration to the guide holes

  10. Gaining control

    NARCIS (Netherlands)

    Enden, van der E.; Laan, van der R.

    2008-01-01

    The article reports on the efforts of companies to find a solution for tax risk management, tax accounting and being in control. In trying to find a solution, companies work towards an integrated tax control framework (TCF), a tax risk management and control environment embedded in the internal

  11. Associational control

    DEFF Research Database (Denmark)

    Hvid, Helge Søndergaard; Lund, Henrik Lambrecht; Grosen, Sidsel Lond

    2010-01-01

    Over the last 30 years, the concept of control has had a central position in research into the psychological working environment. Control has been understood as individual autonomy and individual opportunities for development. This article examines whether the concept of control has the same key...

  12. Screening of tomato genotypes for resistance to tomato fruit borer (helicoverpa armiger hubner) in Pakistan

    International Nuclear Information System (INIS)

    Sajjad, M.; Ashfaq, M.; Suhail, A.

    2011-01-01

    Tomato genotypes viz., Roma Local, Rio Grande, Tanja, Chico III, Long Tipped, Red-Top, FS-8001, FS-8002, Tropic, Pakit, Peelo, NARC-1, Roma VFN, Pant Bahr, Ebein, Nova Mech, Rockingham, Nagina, Shalkot-96, Pomodoro, Manik, Gressilesse, Nadir, Early Mech, Tommy, Pusha Rubi, Tropic boy, Big Long, Sahil, Sun 6002, Money-Maker and Royesta were evaluated to screen out the suitable resistant/susceptible genotypes against the fruit borer in Pakistan. The results imparted that the percentage of fruit infestation and larval population per plant on tested genotypes of tomato varied significantly. Roma VF, NARC-1 and FS-8002 were categorized as susceptible genotypes with fruit infestation (37.69%, 37.08% and 36.41%, respectively) and larval population per plant (1.02%, 1.02% and 0.84 %, respectively). Whereas, the genotypes Sahil, Pakit and Nova Mecb had fruit infestation (12.30%, 13.14% and 13.96%, respectively) and larval population per plant (0.42%, 0.42% and 0.43%, respectively) and declared as resistant genotypes to tomato fruit borer. Lower values of host plant susceptibility indices (HPSI) were recorded on resistant genotypes. Sahil, Pakit and Nova Mecb could be used as a source of resistance for developing tomato genotypes resistant to tomato fruit borer. (author)

  13. Optimal control

    CERN Document Server

    Aschepkov, Leonid T; Kim, Taekyun; Agarwal, Ravi P

    2016-01-01

    This book is based on lectures from a one-year course at the Far Eastern Federal University (Vladivostok, Russia) as well as on workshops on optimal control offered to students at various mathematical departments at the university level. The main themes of the theory of linear and nonlinear systems are considered, including the basic problem of establishing the necessary and sufficient conditions of optimal processes. In the first part of the course, the theory of linear control systems is constructed on the basis of the separation theorem and the concept of a reachability set. The authors prove the closure of a reachability set in the class of piecewise continuous controls, and the problems of controllability, observability, identification, performance and terminal control are also considered. The second part of the course is devoted to nonlinear control systems. Using the method of variations and the Lagrange multipliers rule of nonlinear problems, the authors prove the Pontryagin maximum principle for prob...

  14. Taking Control

    Centers for Disease Control (CDC) Podcasts

    2007-11-01

    This podcast gives action steps and reasons to control diabetes.  Created: 11/1/2007 by National Diabetes Education Program (NDEP), a joint program of the Centers for Disease Control and Prevention and the National Institutes of Health.   Date Released: 11/2/2007.

  15. Control Theory.

    Science.gov (United States)

    Toso, Robert B.

    2000-01-01

    Inspired by William Glasser's Reality Therapy ideas, Control Theory (CT) is a disciplinary approach that stresses people's ability to control only their own behavior, based on internal motivations to satisfy five basic needs. At one North Dakota high school, CT-trained teachers are the program's best recruiters. (MLH)

  16. CONTROL ROD

    Science.gov (United States)

    Walker, D.E.; Matras, S.

    1963-04-30

    This patent shows a method of making a fuel or control rod for a nuclear reactor. Fuel or control material is placed within a tube and plugs of porous metal wool are inserted at both ends. The metal wool is then compacted and the tube compressed around it as by swaging, thereby making the plugs liquid- impervious but gas-pervious. (AEC)

  17. Birth Control

    Science.gov (United States)

    ... even if you aren’t going for birth control. What doesn’t work to prevent pregnancy? top It’s ... and taking care of a baby’s many needs. What if I need birth control in an emergency? top Emergency contraception (EC) is ...

  18. Integrated controls

    International Nuclear Information System (INIS)

    Hollaway, F.W.

    1985-01-01

    During 1984, all portions of the Nova control system that were necessary for the support of laser activation and completion of the Nova project were finished and placed in service on time. The Nova control system has been unique in providing, on schedule, the capabilities required in the central control room and in various local control areas throughout the facility. The ambitious goal of deploying this system early enough to use it as an aid in the activation of the laser was accomplished; thus the control system made a major contribution to the completion of Nova activation on schedule. Support and enhancement activities continued during the year on the VAX computer systems, central control room, operator consoles and displays, Novanet data communications network, system-level software for both the VAX and LSI-11 computers, Praxis control system computer language, software management tools, and the development system, which includes office terminals. Computational support was also supplied for a wide variety of test fixtures required by the optical and mechanical subsystems. Significant new advancements were made in four areas in integrated controls this year: the integration software (which includes the shot scheduler), the Praxis language, software quality assurance audit, and software development and data handling. A description of the accomplishments in each of these areas follows

  19. Controlling Hypertension

    Centers for Disease Control (CDC) Podcasts

    A recent study found an increase in self-reported high blood pressure among U.S. adults, and an increase in the use of medications to control high blood pressure. This podcast discusses the importance of controlling high blood pressure.

  20. Experiencing control

    NARCIS (Netherlands)

    Monaci, G.; Braspenning, R.A.C.; Meerbeek, B.W.; Bingley, P.; Rajagopalan, R.; Triki, M.

    2009-01-01

    This report describes the activities carried out in the first part of the Experiencing Control project (2008-324). The guiding idea of the project is to make control part of the experience, exploring new interaction solutions for complex, engaging interactions with Philips devices in the living

  1. Control rod

    International Nuclear Information System (INIS)

    Kawakami, Kazuo; Shimoshige, Takanori; Nishimura, Akira

    1979-01-01

    Purpose: A control rod has been developed, which provided a plurality of through-holes in the vicinity of the sheath fitting position, in order to flatten burn-up, of fuel rods in positions confronting a control rod. Thereby to facilitate the manufacture of the control rods and prevent fuel rod failures. Constitution: A plurality of through-holes are formed in the vicinity of the sheath fitting position of a central support rod to which a sheath for the control rod is fitted. These through-holes are arranged in the axial direction of the central support rod. Accordingly, burn-up of fuel rods confronting the control rods can be reduced by through-holes and fuel rod failures can be prevented. (Yoshino, Y.)

  2. Describing control

    International Nuclear Information System (INIS)

    Fouet, J.M.; Starynkevitch, B.

    1987-01-01

    Incremental development and maintenance of large systems imply that control be clearly separated from knowledge. Finding efficient control for a given class of knowledge is itself a matter of expertise, to which knowledge-based methods may and should be applied. We present here two attempts at building root systems that may later be tuned by knowledge engineers, using the semantics of each particular application. These systems are given heuristics in a declarative manner, which they use to control the application of heuristics. Eventually, some heuristics may be used to compile others (or themselves) into efficient pieces of programmed code

  3. Drug Control

    Science.gov (United States)

    Leviton, Harvey S.

    1975-01-01

    This article attempts to assemble pertinent information about the drug problem, particularily marihuana. It also focuses on the need for an educational program for drug control with the public schools as the main arena. (Author/HMV)

  4. Institutional Controls

    Data.gov (United States)

    U.S. Environmental Protection Agency — This dataset consists of institutional control data from multiple Superfund sites in U.S. EPA Region 8. These data were acquired from multiple sources at different...

  5. Control rooms

    International Nuclear Information System (INIS)

    Preuss, W.

    1990-01-01

    The current state of knowledge about screen systems for application in traffic (e.g., flight control), process control, and production is presented. The 29 lectures, 5 of which relate to aviation, deal with the optimization of the man-machine interface with respect to unusual operating situations and adequate presentation and action methods on the basis of taks and event analyses integrating the users. (DG) [de

  6. Controlling Hypertension

    Centers for Disease Control (CDC) Podcasts

    Hypertension, or high blood pressure, affects one third of U.S. adults and is a leading cause of heart disease and stroke. A recent study found an increase in self-reported high blood pressure among U.S. adults, and an increase in the use of medications to control high blood pressure. In this podcast, Dr. Fleetwood Loustalot discusses the importance of controlling high blood pressure.

  7. How predictable are the behavioral responses of insects to herbivore induced changes in plants? Responses of two congeneric thrips to induced cotton plants.

    Directory of Open Access Journals (Sweden)

    Rehan Silva

    Full Text Available Changes in plants following insect attack are referred to as induced responses. These responses are widely viewed as a form of defence against further insect attack. In the current study we explore whether it is possible to make generalizations about induced plant responses given the unpredictability and variability observed in insect-plant interactions. Experiments were conducted to test for consistency in the responses of two congeneric thrips, Frankliniella schultzei Trybom and Frankliniella occidentalis Pergrande (Thysanoptera: Thripidae to cotton seedlings (Gossypium hirsutum Linneaus (Malvales: Malvaceae damaged by various insect herbivores. In dual-choice experiments that compared intact and damaged cotton seedlings, F. schultzei was attracted to seedlings damaged by Helicoverpa armigera (Hübner (Lepidoptera: Noctuidae, Tetranychus urticae (Koch (Trombidiforms: Tetranychidae, Tenebrio molitor Linnaeus (Coleoptera: Tenebrionidae, F. schultzei and F. occidentalis but not to mechanically damaged seedlings. In similar tests, F. occidentalis was attracted to undamaged cotton seedlings when simultaneously exposed to seedlings damaged by H. armigera, T. molitor or F. occidentalis. However, when exposed to F. schultzei or T. urticae damaged plants, F. occidentalis was more attracted towards damaged plants. A quantitative relationship was also apparent, F. schultzei showed increased attraction to damaged seedlings as the density of T. urticae or F. schultzei increased. In contrast, although F. occidentalis demonstrated increased attraction to plants damaged by higher densities of T. urticae, there was a negative relationship between attraction and the density of damaging conspecifics. Both species showed greater attraction to T. urticae damaged seedlings than to seedlings damaged by conspecifics. Results demonstrate that the responses of both species of thrips were context dependent, making generalizations difficult to formulate.

  8. Combination of plant and insect eggs as food sources facilitates ovarian development in an omnivorous bug Apolygus lucorum (Hemiptera: Miridae).

    Science.gov (United States)

    Yuan, Wei; Li, Wenjing; Li, Yunhe; Wu, Kongming G

    2013-06-01

    Diet nutrient is considered as an important regulatory factor for reproduction of insects. To understand the effect of different food sources on the reproductive physiology of Apolygus lucorum (Meyer-Dür), the ovarian development in adult females was investigated when they were fed on green beans (Gb), combination of green beans Phaseolus vulgaris L and Helicoverpa armigera eggs (GbHe), or H. armigera eggs (He). A female of A. lucorum has two ovaries, and each ovary contained seven yellowish ovarioles. Females fed on Gb or GbHe had larger ovaries and the ovarioles contained larger numbers of oocytes compared with those fed on He. Females in GeHe treatment has significantly higher number of follicles per ovary throughout the whole adult period compared with those in Gb or He treatment. Furthermore, the length of the best developed ovariole was affected by the diet type. The females fed on GbHe had the most developed ovarioles, with significantly longer ovarioles than those fed on Gb or He. A method was described to quantitatively score the degree of ovarian development in the current study. Similarly, the ovarian development scores were significantly higher for females in GbHe treatment than those in other two diet treatments. The ovarian development significantly delayed for females fed on He. Our results demonstrate that A. lucorum, as an omnivorous insect species, can acquire nutrients from both plant and animal origin food sources, and the combination of plants and animal food sources can significantly facilitate the ovary development of its females.

  9. Control rods

    International Nuclear Information System (INIS)

    Koga, Isao; Masuoka, Ryuzo.

    1979-01-01

    Purpose: To prevent fuel element failures during power conditioning by removing liquid absorbents in poison tubes of control rods in a fast power up step and extracting control rods to slightly increase power in a medium power up step. Constitution: A plurality of poison tubes are disposed in a coaxial or plate-like arrangement and divided into a region capable of compensating the reactivity from the initial state at low temperature to 40% power operation and a region capable of compensating the reactivity in the power up above 40% power operation. Soluble poisons are used as absorbers in the poison tubes corresponding to above 40% power operation and they are adapted to be removed independently from the driving of control rods. The poison tubes filled with the soluble absorbers are responsible for the changes in the reactivity from the initial state at low temperature to the medium power region and the reactivity control is conducted by the elimination of liquid absorbers from the poison tubes. In the succeeding slight power up region above the medium power, power up is proceeding by extracting the control rods having remaining poison tubes filled with solid or liquid absorbers. (Seki, T.)

  10. Losing control

    DEFF Research Database (Denmark)

    Leppink, Eric; Odlaug, Brian Lawrence; Lust, Katherine

    2014-01-01

    picking disorder). CONCLUSIONS: Assaultive behavior appears fairly common among college students and is associated with symptoms of depression and impulse control disorders. Significant distress and diminished behavioral control suggest that assaultive behaviors may often be associated with significant......OBJECTIVE: Assaultive behaviors are common among young people and have been associated with a range of other unhealthy, impulsive behaviors such as substance use and problem gambling. This study sought to determine the predictive ability of single assaultive incidents for impulse control disorders......, an association that has yet to be examined, especially in young adults. METHODS: The authors conducted a university-wide email survey in the spring of 2011 on 6000 university students. The survey examined assaultive behavior and associated mental health variables (using a clinically validated screening...

  11. Impact of transgenic sweet corn silks to two noctuid pests

    Science.gov (United States)

    Eight Bacillus thuringiensis (Bt) transgenic sweet corn hybrids were evaluated (with two controls) for their efficacy against two ear-feeding insects; the corn earworm [Helicoverpa zea (Boddie) (Lepidoptera: Noctuidae)], and the fall armyworm (Spodoptera frugiperda (J.E. Smith) (Lepidoptera: Noctuid...

  12. Efficacy of silk channel injections with insecticides for management of Lepidopteran pests of sweet corn

    Science.gov (United States)

    The primary Lepidopteran pests of sweet corn in Georgia are the corn earworm, Helicoverpa zea (Boddie), and the fall armyworm, Spodoptera frugiperda (J.E. Smith). Control of these pests typically requires multiple insecticide applications from first silking until harvest, with commercial growers fre...

  13. Coordinating controls

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1986-07-15

    While physics Laboratories are having to absorb cuts in resources, the machines they rely on are becoming more and more complex, requiring increasingly sophisticated systems. Rather than being a resourceful engineer or physicist able to timber together solutions in his 'backyard', the modern controls specialist has become a professional in his own right. Because of possible conflicts between increasing sophistication on one hand and scarcer resources on the other, there was felt a need for more contacts among controls specialists to exchange experiences, coordinate development and discuss 'family problems', away from meetings where the main interest is on experimental physics.

  14. Helicopter Controllability

    Science.gov (United States)

    1989-09-01

    106 3. Program CC Systems Technology, Inc. (STI) of Hawthorne, CA., develops and markets PC control system analysis and design software including...is marketed in Palo Alto, Ca., by Applied i and can be used for both linear and non- linear control system analysis. Using TUTSIM involves developing...gravity centroid ( ucg ) can be calculated as 112 n m pi - 2 zi acg n i (7-5) where pi = poles zi = zeroes n = number of poles m = number of zeroes If K

  15. Coordinating controls

    International Nuclear Information System (INIS)

    Anon.

    1986-01-01

    While physics Laboratories are having to absorb cuts in resources, the machines they rely on are becoming more and more complex, requiring increasingly sophisticated systems. Rather than being a resourceful engineer or physicist able to timber together solutions in his 'backyard', the modern controls specialist has become a professional in his own right. Because of possible conflicts between increasing sophistication on one hand and scarcer resources on the other, there was felt a need for more contacts among controls specialists to exchange experiences, coordinate development and discuss 'family problems', away from meetings where the main interest is on experimental physics

  16. Cloning and characterization of the pheromone biosynthesis activating neuropeptide receptor gene in Spodoptera littoralis larvae.

    Science.gov (United States)

    Zheng, Lei; Lytle, Christian; Njauw, Ching-Ni; Altstein, Miriam; Martins-Green, Manuela

    2007-05-15

    In noctuid moths cuticular pigmentation is regulated by the pyrokinin/pheromone biosynthesis activating neuropeptide (PK/PBAN) family, which also mediates a variety of other functions in moths and other insects. Numerous studies have shown that these neuropeptides exert their functions through activation of the PBAN receptor (PBAN-R), with subsequent Ca(2+) influx, followed by either activation of cAMP or direct activation of downstream kinases. Recently, several PBAN-Rs have been identified, all of which are from the pheromone gland of adult female moths, but evidence shows that functional PK/PBAN-Rs can also be expressed in insect larvae, where they mediate melanization and possibly other functions (e.g., diapause). Here, we identified a gene encoding a G-protein-coupled receptor from the 5th instar larval tissue of the moth Spodoptera littoralis. The cDNA of this gene contains an open reading frame with a length of 1050 nucleotides, which translates to a 350-amino acid, 42-kDa protein that shares 92% amino acid identity with Helicoverpa zea and Helicoverpa armigera PBAN-R, 81% with Bombyx mori PBAN-R and 72% with Plutella xylostella PBAN-R. The S. littoralis PBAN-R gene was stably expressed in NIH3T3 cells and transiently in HEK293 cells. We show that it mediates the dose-dependent PBAN-induced intracellular Ca(2+) response and activation of the MAP kinase via a PKC-dependent but Galphai-independent signaling mechanism. Other PK/PBAN family peptides (pheromonotropin and a C-terminally PBAN-derived peptide PBAN(28-33)NH(2)) also triggered MAP kinase activation. This receptor, together with the previously cloned PBAN-R, may facilitate our understanding of the cell-specific responses and functional diversities of this diverse neuropeptide family.

  17. Topology control

    NARCIS (Netherlands)

    Buchin, K.; Buchin, M.; Wagner, D.; Wattenhofer, R.

    2007-01-01

    Information between two nodes in a network is sent based on the network topology, the structure of links connecting pairs of nodes of a network. The task of topology control is to choose a connecting subset from all possible links such that the overall network performance is good. For instance, a

  18. Control mental

    OpenAIRE

    Bueno i Torrens, David, 1965-

    2013-01-01

    La revista especialitzada NeuroReport ha publicat un article que m'ha aportat nous elements de reflexió sobre els mecanismes neurals de control mental que, de forma innata, realitzem les persones com a part de la nostra vida social.

  19. Control rod

    International Nuclear Information System (INIS)

    Igarashi, Takao; Yoshimoto, Yuichiro; Sugawara, Satoshi; Fukumoto, Takashi; Endo, Zen-ichiro; Saito, Shozo; Shinpo, Katsutoshi; Nishimura, Akira; Ozawa, Michihiro

    1988-01-01

    Purpose: To provide a sufficient shutdown margin upon reactor shutdown, prevent sheath deformation without decreasing neutron absorbents and prevent impact shocks exerted to structural materials. Constitution: The control rod of the present invention comprises a neutron absorption region, a sheath deformation means attached to the side wall and means for restricting and supporting axial movement of the neutron absorbent rod. Then, the amount of absorptive nuclei chained absorbents in the lower region is reduced than that in the upper region. In this way, effective neutron absorbing performance can be obtained relative to the neutron importance distribution during reactor shutdown. In addition, since the operationability is improved by reducing the weight of the control rod and the absorptive nuclei chained neutron abosrbers are used, mechanical nuclear life of the control rod can be increased. Thus, it is possible to prevent the outward deformation of the sheath, as well as prevent collision between the neutron absorber rod and the structural material on the side of inserting the control rod generated upon reactor scram by a simple structure. (Kamimura, M.)

  20. COPD - control drugs

    Science.gov (United States)

    Chronic obstructive pulmonary disease - control drugs; Bronchodilators - COPD - control drugs; Beta agonist inhaler - COPD - control drugs; Anticholinergic inhaler - COPD - control drugs; Long-acting inhaler - COPD - control drugs; ...

  1. Environmental controls

    International Nuclear Information System (INIS)

    Brown, S.

    1996-01-01

    Members of the public are exposed to environmental radiations from a variety of sources. In terms of average dose received the major component is from natural sources of radiation for which there is little or no scope to reduce exposure. Where such opportunities do exist, in those homes with high radon concentrations, the householders tend to ignore the risks despite the availability of comparatively straightforward and inexpensive remediation measures. By comparison there is significant public concern about radioactive waste management and the disposal and discharge of radioactivity to the environment despite strict environmental controls. This paper describes the controls and the wider policy context for radioactive waste management following a major review of policy last year. (author)

  2. Controllable dose

    International Nuclear Information System (INIS)

    Alvarez R, J.T.; Anaya M, R.A.

    2004-01-01

    With the purpose of eliminating the controversy about the lineal hypothesis without threshold which found the systems of dose limitation of the recommendations of ICRP 26 and 60, at the end of last decade R. Clarke president of the ICRP proposed the concept of Controllable Dose: as the dose or dose sum that an individual receives from a particular source which can be reasonably controllable by means of any means; said concept proposes a change in the philosophy of the radiological protection of its concern by social approaches to an individual focus. In this work a panorama of the foundations is presented, convenient and inconveniences that this proposal has loosened in the international community of the radiological protection, with the purpose of to familiarize to our Mexican community in radiological protection with these new concepts. (Author)

  3. quality control

    International Nuclear Information System (INIS)

    Skujina, A.; Purina, S.; Riekstina, D.

    1999-01-01

    The optimal objects: soils, spruce needles and bracken ferns were found for the environmental monitoring in the regions of possible radioactive contamination - near SalaspiIs nuclear reactor and Ignalina nuclear power plant. The determination of Sr-90 was based on the radiochemical separation of Sr-90 (=Y-90) by HDEHP extraction and counting the Cerenkov radiation. The quality control of the results was carried out. (authors)

  4. Vehicle Controller

    Science.gov (United States)

    1985-01-01

    UNISTICK is an airplane-like joystick being developed by Johnson Engineering under NASA and VA sponsorship. It allows a driver to control a vehicle with one hand, and is based upon technology developed for the Apollo Lunar Landings of the 1970's. It allows severely handicapped drivers to operate an automobile or van easily. The system is expected to be in production by March 1986.

  5. Control rod

    International Nuclear Information System (INIS)

    Takeda, Toshikazu; Inoue, Kotaro.

    1979-01-01

    Purpose: To flatten the power distribution in the reactor core without impairing neutron economy by disposing pins containing elements of lower atomic number in the central region of a shroud and loading pins containing depleted uranium in the periphery region thereof. Constitution: The shroud has a layer of pins containing depleted uranium in the peripheral region and a layer of pins containing elements of lower atomic number such as beryllium in the central region. Heat removal from those pins containing depleted uranium and elements of lower atomic number (neutron moderator) is effected by sodium flow outside of the cladding material. The control rod operation is conducted by inserting or extracting the central portion (pins containing elements of lower atomic number such as beryllium) inside of the stainless pipe. Upon extraction of the control rod, the moderator in the central region is removed whereby high speed neutrons are no more deccelerated and the absorption rate to the depleted uranium is decreased. This can flatten the power distribution in the reactore core with the disposition of a plurality of control rods at a better neutron economy as compared with the use of neutron absorber such as boron. (Seki, T.)

  6. Control rod

    International Nuclear Information System (INIS)

    Fukumoto, Takashi; Hirakawa, Hiromasa; Kawashima, Norio; Goto, Yasuyuki.

    1994-01-01

    Neutron absorbers are contained in a tubular member comprising, integrally a tubular portion and four corners disposed at the outer circumference of the tubular portion at every 90deg, to provide a neutron absorbing tube. A plurality of neutron absorbing tubes are arranged in parallel in the lateral direction, and adjacent corners are joined, into a blade to constitute a control rod. Such a control rod has a great structural strength, simple in the structure and relatively light in weight and can contain a great amount of neutron absorbers. Upon formation of the control rod by arranging the blades in a cross-like shape, at least a portion thereof is constituted with short neutron absorbing tubes shorter than the entire length of the blade, and gaps are formed at positions in adjacent in the axial direction. With such a constitution, there is no worry that a wing end of the blade collides against or be abraded with a fuel channel box or a fuel support. Even if fuel channels are vibrated upon scram of the reactor, such as occurrence of earthquakes, it can be inserted to the reactor easily. (N.H.)

  7. Controlled fragmentation

    International Nuclear Information System (INIS)

    Arnold, Werner

    2002-01-01

    Contrary to natural fragmentation, controlled fragmentation offers the possibility to adapt fragment parameters like size and mass to the performance requirements in a very flexible way. Known mechanisms like grooves inside the casing, weaken the structure. This is, however, excluded for applications with high accelerations during launch or piercing requirements for example on a semi armor piercing penetrator. Another method to achieve controlled fragmentation with an additional grid layer is presented with which the required grooves are produced 'just in time' inside the casing during detonation of the high explosive. The process of generating the grooves aided by the grid layer was studied using the hydrocode HULL with respect to varying grid designs and material combinations. Subsequent to this, a large range of these theoretically investigated combinations was contemplated in substantial experimental tests. With an optimised grid design and a suitable material selection, the controlled fragment admits a very flexible adaptation to the set requirements. Additional advantages like the increase of perforation performance or incendiary amplification can be realized with the grid layer

  8. Flow Control

    Science.gov (United States)

    2013-04-08

    can be written as â fj (t) =WO tanh( WIx (t)+bI)+bO, (38) where WI , WO are the input and output matrices, respectively, and bI and bO are the input...applications, present on envisioned airborne optical platforms . One of the problems is that all adaptive optical systems rely on mechanically moving some...of successfully controlling the optical aberration due to the flow over the aperture of airborne optical platforms . As outlined above, systems

  9. Control rod

    International Nuclear Information System (INIS)

    Igarashi, Takao; Sugawara, Satoshi; Yoshimoto, Yuichiro; Saito, Shozo; Fukumoto, Takashi.

    1987-01-01

    Purpose: To reduce the weight and thereby obtain satisfactory operationability of control rods by combining absorbing nuclear chain type neutron absorbers and conventional type neutron absorbers in the axial direction of blades. Constitution: Neutron absorber rods and long life type neutron absorber rods are disposed in a tie rod and a sheath. The neutron absorber rod comprises a poison tube made of stainless steels and packed with B 4 C powder. The long life type neutron absorber rod is prepared by packing B-10 enriched boron carbide powder into a hafnium metal rod, hafnium pipe, europium and stainless made poison tube. Since the long life type absorber rod uses HF as the absorbing nuclear chain type neutron absorber, it absorbs neutrons to form new neutron absorbers to increase the nuclear life. (Yoshino, Y.)

  10. Control Valve

    Energy Technology Data Exchange (ETDEWEB)

    Moore, Wayne R.

    2018-03-20

    A control valve includes a first conduit having a first inlet and a first outlet and defining a first passage; a second conduit having a second inlet and a second outlet and defining a second passage, the second conduit extending into the first passage such that the second inlet is located within the first passage; and a valve plate disposed pivotably within the first passage, the valve plate defining a valve plate surface. Pivoting of the valve plate within the first passage varies flow from the first inlet to the first outlet and the valve plate is pivotal between a first position and a second position such that in the first position the valve plate substantially prevents fluid communication between the first passage and the second passage and such that in the second position the valve plate permits fluid communication between the first passage and the second passage.

  11. Control Prenatal

    Directory of Open Access Journals (Sweden)

    P. Susana Aguilera, DRA.

    2014-11-01

    Full Text Available Los principales objetivos del control prenatal son identificar aquellos pacientes de mayor riesgo, con el fin de realizar intervenciones en forma oportuna que permitan prevenir dichos riesgos y así lograr un buen resultado perinatal. Esto se realiza a través de la historia médica y reproductiva de la mujer, el examen físico, la realización de algunos exámenes de laboratorio y exámenes de ultrasonido. Además es importante promover estilos de vida saludables, la suplementación de ácido fólico, una consejería nutricional y educación al respecto.

  12. Custom controls

    Science.gov (United States)

    Butell, Bart

    1996-02-01

    Microsoft's Visual Basic (VB) and Borland's Delphi provide an extremely robust programming environment for delivering multimedia solutions for interactive kiosks, games and titles. Their object oriented use of standard and custom controls enable a user to build extremely powerful applications. A multipurpose, database enabled programming environment that can provide an event driven interface functions as a multimedia kernel. This kernel can provide a variety of authoring solutions (e.g. a timeline based model similar to Macromedia Director or a node authoring model similar to Icon Author). At the heart of the kernel is a set of low level multimedia components providing object oriented interfaces for graphics, audio, video and imaging. Data preparation tools (e.g., layout, palette and Sprite Editors) could be built to manage the media database. The flexible interface for VB allows the construction of an infinite number of user models. The proliferation of these models within a popular, easy to use environment will allow the vast developer segment of 'producer' types to bring their ideas to the market. This is the key to building exciting, content rich multimedia solutions. Microsoft's VB and Borland's Delphi environments combined with multimedia components enable these possibilities.

  13. Control rods

    International Nuclear Information System (INIS)

    Hirukawa, Koji.

    1979-01-01

    Purpose: To ensure the fuel safety by constituting a control rod with a plurality of poison bodies suspended in a cross-like section and shorter length poison bodies made movable and engageable in the gap between each of the above poison bodies thereby maintaining the function of the shorter length poison constant. Constitution: Cross-like supports are secured to the upper and lower parts of a driving shaft journaled in a sheath and poison bodies composed of neutron absorber poisons of a large thermal neutron absorption cross section and neutron absorber poison tubes for containing them are suspended from the supports. A movable cross-like support is mounted slidably at its base to the lower part of the driving shaft and poison bodies shorter than the above poison bodies and composed of neutron absorber poisons having a greater absorption cross section at the neutron energy region higher than thermal neutron region and neutron poison tubes for containing them are suspended to the movable support at the position capable of engaging in the gap between each of the poison bodies. (Kawakami, Y.)

  14. Radiation control

    International Nuclear Information System (INIS)

    Uchida, Akira

    1981-01-01

    This paper describes on how the condition of radiation level in the ring (storage ring) experimentation room changes corresponding to the operating stage of SOR-ring (synchrotron radiation storage ring), and does not describe on the present radiation control in the SOR facility. The operating stage of SOR is divided into the following five: (1) 307 MeV electron injection, (2) 307 MeV electron storage (used for SOR experiments), (3) energy increase from 307 to 380 MeV, (4) 380 MeV electron storage, (5) re-injection and completion of operation. Gamma and X ray levels are shown when electron beam is injected from the electron synchrotron to the SOR-ring. Two main causes of the high level are reported. Spatial dose rate in storing 307 MeV electrons in also illustrated. This is sufficiently lower than that at electron incidence. The measurement of radiation level at the time of energy increase from 307 to 380 MeV has just started. Since the radiation level in 380 MeV storage, measured at the points about 20 cm apart from the electron orbit, showed several mR/h, the level seems to be negligible at the points where experiments are carried out, 1 m away from the measurement points. The radiation level in electron reinjection and completion of operation may be large during a short period (a few Roentgen) like the time of energy increase. Therefore, the beam shall be re-injected or decreased after confirming that all experimenters have retreated into the predetermined place. (Wakatsuki, Y.)

  15. Chlorophyll degradation in the gut of generalist and specialist Lepidopteran caterpillars.

    Science.gov (United States)

    Badgaa, Amarsanaa; Jia, Aiqun; Ploss, Kerstin; Boland, Wilhelm

    2014-12-01

    Plant feeding herbivores excrete most of the ingested chlorophyll (Chl) as partly degraded derivatives lacking the phytol side chain and the central magnesium ion. An ecological role of digested and degraded Chls in the interactions between insects, their food plant and other insects has been described recently. To gain more information on common degradation patterns in plant-feeding insects, the orals secretions and frass of five Lepidopteran caterpillars covering generalists and specialists, namely Spodoptera littoralis, Spodoptera eridania, Heliothis virescens, Helicoverpa armigera, Manduca sexta, and, for comparison, of the leaf beetle larva Chrysomela lapponica were analyzed for chlorophyll catabolites. The major degradation products were determined as pheohorbide a/b and pyropheophorbide a/b by using LC-MS, LC-NMR, UV, and fluorescence spectrometry. The compounds were not present in fresh leaves of the food plants (Phaseolus lunatus, Nicotiana tabacum). The catabolite spectrum in generalists and specialists was qualitatively similar and could be attributed to the action of gut proteins and the strongly alkaline milieu in the digestive tract. Due to the anaerobic environment of the larval gut, the tetrapyrrole core of the Chl catabolites was not cleaved. Substantial amounts of Chl a/b metabolites were strongly complexed by a protein in the mid-gut.

  16. Identification and characterization of aldehyde oxidases (AOXs) in the cotton bollworm

    Science.gov (United States)

    Xu, Wei; Liao, Yalin

    2017-12-01

    Aldehyde oxidases (AOXs) are a family of metabolic enzymes that oxidize aldehydes into carboxylic acids; therefore, they play critical roles in detoxification and degradation of chemicals. By using transcriptomic and genomic approaches, we successfully identified six putative AOX genes (HarmAOX1-6) from cotton bollworm, Helicoverpa armigera (Hübner) (Lepidoptera: Noctuidae). In silico expression profile, reverse transcription (RT)-PCR, and quantitative PCR (qPCR) analyses showed that HarmAOX1 is highly expressed in adult antennae, tarsi, and larval mouthparts, so they may play an important role in degrading plant-derived compounds. HarmAOX2 is highly and specifically expressed in adult antennae, suggesting a candidate pheromone-degrading enzyme (PDE) to inactivate the sex pheromone components (Z)-11-hexadecenal and (Z)-9-hexadecenal. RNA sequencing data further demonstrated that a number of host plants they feed on could significantly upregulate the expression levels of HarmAOX1 in larvae. This study improves our understanding of insect aldehyde oxidases and insect-plant interactions.

  17. MetaGaAP: A Novel Pipeline to Estimate Community Composition and Abundance from Non-Model Sequence Data

    Directory of Open Access Journals (Sweden)

    Christopher Noune

    2017-02-01

    Full Text Available Next generation sequencing and bioinformatic approaches are increasingly used to quantify microorganisms within populations by analysis of ‘meta-barcode’ data. This approach relies on comparison of amplicon sequences of ‘barcode’ regions from a population with public-domain databases of reference sequences. However, for many organisms relevant ‘barcode’ regions may not have been identified and large databases of reference sequences may not be available. A workflow and software pipeline, ‘MetaGaAP,’ was developed to identify and quantify genotypes through four steps: shotgun sequencing and identification of polymorphisms in a metapopulation to identify custom ‘barcode’ regions of less than 30 polymorphisms within the span of a single ‘read’, amplification and sequencing of the ‘barcode’, generation of a custom database of polymorphisms, and quantitation of the relative abundance of genotypes. The pipeline and workflow were validated in a ‘wild type’ Alphabaculovirus isolate, Helicoverpa armigera single nucleopolyhedrovirus (HaSNPV-AC53 and a tissue-culture derived strain (HaSNPV-AC53-T2. The approach was validated by comparison of polymorphisms in amplicons and shotgun data, and by comparison of predicted dominant and co-dominant genotypes with Sanger sequences. The computational power required to generate and search the database effectively limits the number of polymorphisms that can be included in a barcode to 30 or less. The approach can be used in quantitative analysis of the ecology and pathology of non-model organisms.

  18. Assessment of pest and pesticide trends in vegetable crops in united arab emirates and sultanate of oman

    International Nuclear Information System (INIS)

    Waakeh, W.; Aldahmani, J.H.; Deadman, M.L.; Saadi, A.A.

    2007-01-01

    A preliminary survey on pesticide uses in 40 vegetable-growing farms representing different agricultural areas in Oman and the UAE, twenty farms from each country, revealed that all the vegetable farms used pesticides for crop protection. Among the major insect-pests, white flies (Bemisia tabaci), leafminers (Liriomyza trifolii), melon fruit flies (Bactrocera ciliatus), aphids (Aphis spp.) and tobacco leafworm (Spodoptera litteralis) were recorded in Omani farms. In the UAE, white flies, leafminers, cutworms (Agrotis ypsilan), tomato fruitworms (Helicoverpa armigera) and eggplant fruitworms (Leucinodes orbonalis) were the 5 top insect-pests. Among the plant diseases, powdery mildew (Erysiphe spp.), blight (Alternaria spp.), damping off (Pythium spp.), leafspot (Alternaria spp.) and mosaic (CMV) Were major cause of vegetable diseases in Omani farms; whereas, damping off (Pythium aphanidermatum), downy mildew (Pseudoperonspora cubensis), early blight (Alternaria solani), septoria leaf spot (Septoria lycopersici) and anthracnose rip rot (colletotrichum spp.) were the most predominant diseases encountered in most UAE farms. Among the most commonly used pesticides, 29 insecticides, 16 fungicides and 3 herbicides were used by the vegetable farmers. Around 55% of Omani farms used routine application of pesticides, irrespective of the pest presence. Whereas, in the UAE, most farmers started to spray pesticides at 6-20% pest (insect, disease and weeds) infection. Over 65 of the farms, in both the countries, received chemical pest management information from the sales representatives. (author)

  19. Coincidence of pheromone and plant odor leads to sensory plasticity in the heliothine olfactory system.

    Directory of Open Access Journals (Sweden)

    Elena Ian

    Full Text Available Male moths possess a highly specialized olfactory system comprised of two segregated sub-arrangements dedicated to processing information about plant odors and pheromones, respectively. Communication between these two sub-systems has been described at the peripheral level, but relatively little is known about putative interactions at subsequent synaptic relays. The male moth faces the challenge of seeking out the conspecific female in a highly dynamic odor world. The female-produced pheromone blend, which is a limited resource serving as guidance for the male, will reach his antennae in intermittent pockets of odor filaments mixed with volatiles from various plants. In the present study we performed calcium imaging for measuring odor-evoked responses in the uni-glomerular antennal-lobe projection neurons (analog to mitral cells in the vertebrate olfactory bulb of Helicoverpa armigera. In order to investigate putative interactions between the two sub-systems tuned to plant volatiles and pheromones, respectively, we performed repeated stimulations with a selection of biologically relevant odors. We found that paired stimulation with a plant odor and the pheromone led to suppressed responses in both sub-systems as compared to those evoked during initial stimulation including application of each odor stimulus alone. The fact that the suppression persisted also after pairing, indicates the existence of a Hebbian-like plasticity in the primary olfactory center established by temporal pairing of the two odor stimulation categories.

  20. Beauveria medogensis sp. nov., a new fungus of the entomopathogenic genus from China.

    Science.gov (United States)

    Imoulan, Abdessamad; Wu, Hai-Jun; Lu, Wei-Lai; Li, Yi; Li, Bin-Bin; Yang, Rei-Heng; Wang, Wen-Jing; Wang, Xiao-Liang; Kirk, Paul M; Yao, Yi-Jian

    2016-09-01

    Beauveria is among the most ubiquitous genera of entomopathogenic fungi throughout the world. A previously unknown species of the genus was recently discovered from a soil sample collected from Tibetan Plateau, China and is here described as new to science, B. medogensis sp. nov. The new species is distinguished from its closest relatives based on both morphological characterization and molecular phylogenetic analyses. Beauveria medogensis is characterized by globose to subglobose conidia, morphologically similar to some other species of in the genus, but was conclusively separated from those species in the phylogenetic analyses including sequences of four nuclear genes (RPB1, RPB2, TEF1 and Bloc). The new species was clustered in the analyses in a single terminal lineage which was grouped with B. australis sequences together as a sister clade to the B. brongniartii terminal clade. Although molecularly closely related, the new species is distinct morphologically from its closest sisters, B. australis and B. brongniartii, in producing globose to subglobose conidia rather than subglobose, broadly ellipsoid to ellipsoid conidia or ellipsoidal to cylindrical conidia. As isolated from a soil sample, the entomopathogenicity of the new species has been confirmed using Helicoverpa armigera and Tenebrio molitor larvae. Copyright © 2016 Elsevier Inc. All rights reserved.

  1. Developing Bisexual Attract-and-Kill for Polyphagous Insects: Ecological Rationale versus Pragmatics.

    Science.gov (United States)

    Gregg, Peter C; Del Socorro, Alice P; Hawes, Anthony J; Binns, Matthew R

    2016-07-01

    We discuss the principles of bisexual attract-and-kill, in which females as well as males are targeted with an attractant, such as a blend of plant volatiles, combined with a toxicant. While the advantages of this strategy have been apparent for over a century, there are few products available to farmers for inclusion in integrated pest management schemes. We describe the development, registration, and commercialization of one such product, Magnet(®), which was targeted against Helicoverpa armigera and H. punctigera in Australian cotton. We advocate an empirical rather than theoretical approach to selecting and blending plant volatiles for such products, and emphasise the importance of field studies on ecologically realistic scales of time and space. The properties required of insecticide partners also are discussed. We describe the studies that were necessary to provide data for registration of the Magnet(®) product. These included evidence of efficacy, including local and area-wide impacts on the target pest, non-target impacts, and safety for consumers and applicators. In the decade required for commercial development, the target market for Magnet(®) has been greatly reduced by the widespread adoption of transgenic insect-resistant cotton in Australia. We discuss potential applications in resistance management for transgenic cotton, and for other pests in cotton and other crops.

  2. Juvenile hormone prevents 20-hydroxyecdysone-induced metamorphosis by regulating the phosphorylation of a newly identified broad protein.

    Science.gov (United States)

    Cai, Mei-Juan; Liu, Wen; Pei, Xu-Yang; Li, Xiang-Ru; He, Hong-Juan; Wang, Jin-Xing; Zhao, Xiao-Fan

    2014-09-19

    The steroid hormone 20-hydroxyecdysone (20E) initiates insect molting and metamorphosis. By contrast, juvenile hormone (JH) prevents metamorphosis. However, the mechanism by which JH inhibits metamorphosis remains unclear. In this study, we propose that JH induces the phosphorylation of Broad isoform Z7 (BrZ7), a newly identified protein, to inhibit 20E-mediated metamorphosis in the lepidopteran insect Helicoverpa armigera. The knockdown of BrZ7 in larvae inhibited metamorphosis by repressing the expression of the 20E response gene. BrZ7 was weakly expressed and phosphorylated during larval growth but highly expressed and non-phosphorylated during metamorphosis. JH regulated the rapid phosphorylation of BrZ7 via a G-protein-coupled receptor-, phospholipase C-, and protein kinase C-triggered pathway. The phosphorylated BrZ7 bound to the 5'-regulatory region of calponin to regulate its expression in the JH pathway. Exogenous JH induced BrZ7 phosphorylation to prevent metamorphosis by suppressing 20E-related gene transcription. JH promoted non-phosphorylated calponin interacting with ultraspiracle protein to activate the JH pathway and antagonize the 20E pathway. This study reveals one of the possible mechanisms by which JH counteracts 20E-regulated metamorphosis by inducing the phosphorylation of BrZ7. © 2014 by The American Society for Biochemistry and Molecular Biology, Inc.

  3. Juvenile Hormone Prevents 20-Hydroxyecdysone-induced Metamorphosis by Regulating the Phosphorylation of a Newly Identified Broad Protein*

    Science.gov (United States)

    Cai, Mei-Juan; Liu, Wen; Pei, Xu-Yang; Li, Xiang-Ru; He, Hong-Juan; Wang, Jin-Xing; Zhao, Xiao-Fan

    2014-01-01

    The steroid hormone 20-hydroxyecdysone (20E) initiates insect molting and metamorphosis. By contrast, juvenile hormone (JH) prevents metamorphosis. However, the mechanism by which JH inhibits metamorphosis remains unclear. In this study, we propose that JH induces the phosphorylation of Broad isoform Z7 (BrZ7), a newly identified protein, to inhibit 20E-mediated metamorphosis in the lepidopteran insect Helicoverpa armigera. The knockdown of BrZ7 in larvae inhibited metamorphosis by repressing the expression of the 20E response gene. BrZ7 was weakly expressed and phosphorylated during larval growth but highly expressed and non-phosphorylated during metamorphosis. JH regulated the rapid phosphorylation of BrZ7 via a G-protein-coupled receptor-, phospholipase C-, and protein kinase C-triggered pathway. The phosphorylated BrZ7 bound to the 5′-regulatory region of calponin to regulate its expression in the JH pathway. Exogenous JH induced BrZ7 phosphorylation to prevent metamorphosis by suppressing 20E-related gene transcription. JH promoted non-phosphorylated calponin interacting with ultraspiracle protein to activate the JH pathway and antagonize the 20E pathway. This study reveals one of the possible mechanisms by which JH counteracts 20E-regulated metamorphosis by inducing the phosphorylation of BrZ7. PMID:25096576

  4. The evolution and expression of the moth visual opsin family.

    Directory of Open Access Journals (Sweden)

    Pengjun Xu

    Full Text Available Because visual genes likely evolved in response to their ambient photic environment, the dichotomy between closely related nocturnal moths and diurnal butterflies forms an ideal basis for investigating their evolution. To investigate whether the visual genes of moths are associated with nocturnal dim-light environments or not, we cloned long-wavelength (R, blue (B and ultraviolet (UV opsin genes from 12 species of wild-captured moths and examined their evolutionary functions. Strong purifying selection appeared to constrain the functions of the genes. Dark-treatment altered the levels of mRNA expression in Helicoverpa armigera such that R and UV opsins were up-regulated after dark-treatment, the latter faster than the former. In contrast, B opsins were not significantly up-regulated. Diel changes of opsin mRNA levels in both wild-captured and lab-reared individuals showed no significant fluctuation within the same group. However, the former group had significantly elevated levels of expression compared with the latter. Consequently, environmental conditions appeared to affect the patterns of expression. These findings and the proportional expression of opsins suggested that moths potentially possessed color vision and the visual system played a more important role in the ecology of moths than previously appreciated. This aspect did not differ much from that of diurnal butterflies.

  5. The halo effect: suppression of pink bollworm on non-Bt cotton by Bt cotton in China.

    Directory of Open Access Journals (Sweden)

    Peng Wan

    Full Text Available In some previously reported cases, transgenic crops producing insecticidal proteins from Bacillus thuringiensis (Bt have suppressed insect pests not only in fields planted with such crops, but also regionally on host plants that do not produce Bt toxins. Here we used 16 years of field data to determine if Bt cotton caused this "halo effect" against pink bollworm (Pectinophora gossypiella in six provinces of the Yangtze River Valley of China. In this region, the percentage of cotton hectares planted with Bt cotton increased from 9% in 2000 to 94% in 2009 and 2010. We found that Bt cotton significantly decreased the population density of pink bollworm on non-Bt cotton, with net decreases of 91% for eggs and 95% for larvae on non-Bt cotton after 11 years of Bt cotton use. Insecticide sprays targeting pink bollworm and cotton bollworm (Helicoverpa armigera decreased by 69%. Previously reported evidence of the early stages of evolution of pink bollworm resistance to Bt cotton in China has raised concerns that if unchecked, such resistance could eventually diminish or eliminate the benefits of Bt cotton. The results reported here suggest that it might be possible to find a percentage of Bt cotton lower than the current level that causes sufficient regional pest suppression and reduces the risk of resistance.

  6. Active vibration control by robust control techniques

    International Nuclear Information System (INIS)

    Lohar, F.A.

    2001-01-01

    This paper studies active vibration control of multi-degree-of-freedom system. The control techniques considered are LTR, H/sup 2/ and H/sup infinite/. The results show that LTR controls the vibration but its respective settling time is higher than that of the other techniques. The control performance of H/sup infinite/ control is similar to that of H/sup 2/ control in the case of it weighting functions. However, H/sup infinite/ control is superior to H/sup 2/ control with respect to robustness, steady state error and settling time. (author)

  7. Controlling Separation in Turbomachines

    Science.gov (United States)

    Evans, Simon; Himmel, Christoph; Power, Bronwyn; Wakelam, Christian; Xu, Liping; Hynes, Tom; Hodson, Howard

    2010-01-01

    Four examples of flow control: 1) Passive control of LP turbine blades (Laminar separation control). 2) Aspiration of a conventional axial compressor blade (Turbulent separation control). 3) Compressor blade designed for aspiration (Turbulent separation control). 4.Control of intakes in crosswinds (Turbulent separation control).

  8. Control panel for CMC 8080 crate controller

    International Nuclear Information System (INIS)

    Masayuki Inokuchi

    1978-01-01

    The main features of Control Panel for CAMAC Crate Controller CMC 8080 are described. The control panel can be directly connected with CRATE CONTROLLER's front panel connector with a 50 lines cable without any changes in CMC 8080 system circuits. (author)

  9. Uniting Control Lyapunov and Control Barrier Functions

    NARCIS (Netherlands)

    Romdlony, Zakiyullah; Jayawardhana, Bayu

    2014-01-01

    In this paper, we propose a nonlinear control design for solving the problem of stabilization with guaranteed safety. The design is based on the merging of a Control Lyapunov Function and a Control Barrier Function. The proposed control method allows us to combine the design of a stabilizer based on

  10. Interaction between production control and quality control

    NARCIS (Netherlands)

    Bij, van der J.D.; Ekert, van J.H.W.

    1999-01-01

    Describes a qualitative study on interaction between systems for production control and quality control within industrial organisations. Production control and quality control interact in a sense. Good performance for one aspect often influences or frustrates the performance of the other. As far as

  11. Control heeft vele gezichten

    NARCIS (Netherlands)

    Steens, H.B.A.

    The editorial summarizes several perspectives of control, including the control conducted by supervisors, control based on classical budgeting, control by analytics, et cetera, and relates these angles to the papers in this issue of the journal.

  12. Hierarchical Control of Thermostatically Controller Loads for Primary Frequency Control

    DEFF Research Database (Denmark)

    Zhao, Haoran; Wu, Qiuwei; Huang, Shaojun

    2016-01-01

    reserve references. At the middle level, distribution substations estimate the available power of TCLs based on the aggregated bin model, and dispatch control signals to individual TCLs. At the local level, a supplementary frequency control loop is implemented at the local controller, which makes TCLs...... respond to the frequency event autonomously. Case studies show that the proposed controller can efficiently respond to frequency events and fulfill the requirement specified by the system operator. The users’ comforts are not compromised and the short cycling of TCLs is largely reduced. Due...... to the autonomous control, the communication requirement is minimized....

  13. Incoherent control of locally controllable quantum systems

    International Nuclear Information System (INIS)

    Dong Daoyi; Zhang Chenbin; Rabitz, Herschel; Pechen, Alexander; Tarn, T.-J.

    2008-01-01

    An incoherent control scheme for state control of locally controllable quantum systems is proposed. This scheme includes three steps: (1) amplitude amplification of the initial state by a suitable unitary transformation, (2) projective measurement of the amplified state, and (3) final optimization by a unitary controlled transformation. The first step increases the amplitudes of some desired eigenstates and the corresponding probability of observing these eigenstates, the second step projects, with high probability, the amplified state into a desired eigenstate, and the last step steers this eigenstate into the target state. Within this scheme, two control algorithms are presented for two classes of quantum systems. As an example, the incoherent control scheme is applied to the control of a hydrogen atom by an external field. The results support the suggestion that projective measurements can serve as an effective control and local controllability information can be used to design control laws for quantum systems. Thus, this scheme establishes a subtle connection between control design and controllability analysis of quantum systems and provides an effective engineering approach in controlling quantum systems with partial controllability information.

  14. Covariance upperbound controllers for networked control systems

    International Nuclear Information System (INIS)

    Ko, Sang Ho

    2012-01-01

    This paper deals with designing covariance upperbound controllers for a linear system that can be used in a networked control environment in which control laws are calculated in a remote controller and transmitted through a shared communication link to the plant. In order to compensate for possible packet losses during the transmission, two different techniques are often employed: the zero-input and the hold-input strategy. These use zero input and the latest control input, respectively, when a packet is lost. For each strategy, we synthesize a class of output covariance upperbound controllers for a given covariance upperbound and a packet loss probability. Existence conditions of the covariance upperbound controller are also provided for each strategy. Through numerical examples, performance of the two strategies is compared in terms of feasibility of implementing the controllers

  15. Output Control Using Feedforward And Cascade Controllers

    Science.gov (United States)

    Seraji, Homayoun

    1990-01-01

    Report presents theoretical study of open-loop control elements in single-input, single-output linear system. Focus on output-control (servomechanism) problem, in which objective is to find control scheme that causes output to track certain command inputs and to reject certain disturbance inputs in steady state. Report closes with brief discussion of characteristics and relative merits of feedforward, cascade, and feedback controllers and combinations thereof.

  16. Controlling chaotic systems via nonlinear feedback control

    International Nuclear Information System (INIS)

    Park, Ju H.

    2005-01-01

    In this article, a new method to control chaotic systems is proposed. Using Lyapunov method, we design a nonlinear feedback controller to make the controlled system be stabilized. A numerical example is given to illuminate the design procedure and advantage of the result derived

  17. Personal exposure control system

    International Nuclear Information System (INIS)

    Tanabe, Ken-ichi; Akashi, Michio

    1994-01-01

    Nuclear power stations are under strict radiation control. Exposure control for nuclear workers is the most important operation, and so carefully thought out measures are taken. This paper introduces Fuji Electric's personal exposure control system that meets strict exposure control and rationalizes control operations. The system has a merit that it can provide required information in an optimum form using the interconnection of a super minicomputer and exposure control facilities and realizes sophisticated exposure control operations. (author)

  18. Introduction of digital control

    International Nuclear Information System (INIS)

    Kim, Sang Jin

    1988-01-01

    This book is one of mechatronics series. It deals with digital control, which includes what is digital control?, display way of control system, output of primary system, secondary system like example of system and display way of the system, stabilizing of control system such as method to decide stability and system out of control, displaying equation of state into vector, good control such as the right characteristic, transient behavior and design of position control system using DC servo motor.

  19. CRISPR/Cas9 mediated high efficiency knockout of the eye color gene vermillion in Helicoverpa zea (Boddie)

    Science.gov (United States)

    Among various genome editing tools available for functional genomic studies, reagents based on clustered regularly interspersed palindromic repeats (CRISPR) have gained popularity due to ease and versatility. CRISPR reagents consists of ribonucleoprotein (RNP) complexes formed by combining guide RNA...

  20. Aromatic/heterocyclic amino acids and the simulated sunlight-ultraviolet inactivation of the Heliothis/Helicoverpa baculovirus

    International Nuclear Information System (INIS)

    Ignoffo, C.M.; Garcia, C.

    1995-01-01

    Tryptophan, of five aromatic/heterocyclic amino acids (tyrosine, phenylalanine, proline, histidine) provided significant protection of the Heliothis baculovirus (HzSNPV) from inactivation by simulated ultraviolet (SUV). Fifty percent of SUV protection of HzSNPV with tryptophan or tyrosine was obtained at 0.03 mg/ml and 0.5 mg/ml, respectively. Rates as high as 100.0 mg/ml of phenylalanine, histidine, or proline provided <50% protection. The extent of tryptophan protection was correlated with its absorption in the sunlight UV-B spectra. 16 refs., 2 tabs

  1. Solid state controller three axes controller

    Science.gov (United States)

    Bailey, C. L., Jr. (Inventor)

    1973-01-01

    The reported flight controller features a handle grip which is mounted on a longitudinally extending control element. The handle grip is pivotally mounted on the control element about a pitch axis which is perpendicular to the longitudinal axis through the control element. The pivotal mounting includes a resilient force mounting mechanism which centers the grip relative to the control element. Rotation of the handle grip produces a direct rotation of a transducer element in a transducer which provides an electrical indication of the rotative movement about three mutually perpendicular axes.

  2. PID control with robust disturbance feedback control

    DEFF Research Database (Denmark)

    Kawai, Fukiko; Vinther, Kasper; Andersen, Palle

    2015-01-01

    Disturbance Feedback Control (DFC) is a technique, originally proposed by Fuji Electric, for augmenting existing control systems with an extra feedback for attenuation of disturbances and model errors. In this work, we analyze the robustness and performance of a PID-based control system with DFC...... and performance (if such gains exist). Finally, two different simulation case studies are evaluated and compared. Our numerical studies indicate that better performance can be achieved with the proposed method compared with a conservatively tuned PID controller and comparable performance can be achieved when...... compared with an H-infinity controller....

  3. Organizational Control: Two Functions

    Science.gov (United States)

    Ouchi, William G.; Maguire, Mary Ann

    1975-01-01

    Distinguishes between two modes of organizational control, personal surveillance (behavior control) and the measurement of outputs (output control). Output control occurs in response to a manager's need to provide legitimate evidence of performance, while behavior control is exerted when means-ends relations are known and appropriate instruction…

  4. Structural Pest Control.

    Science.gov (United States)

    Kahn, M. S.; Hoffman, W. M.

    This manual is designed for those who seek certification as pesticide applicators for industrial, institutional, structural, and health-related pest control. It is divided into six sections covering general pest control, wood-destroying organisms, bird control, fumigation, rodent control, and industrial weed control. The manual gives information…

  5. BSF control system

    International Nuclear Information System (INIS)

    Irie, Y.; Ishii, K.; Ninomiya, S.; Sasaki, H.; Sakai, I.

    1982-08-01

    The booster synchrotron utilization facility (BSF) is a facility which utilizes the four fifths of available beam pulses from the KEK booster synchrotron. The BSF control system includes the beam line control, interactions with the PS central control room and the experimental facilities, and the access control system. A brief description of the various components in the control system is given. (author)

  6. Motion control report

    CERN Document Server

    2013-01-01

    Please note this is a short discount publication. In today's manufacturing environment, Motion Control plays a major role in virtually every project.The Motion Control Report provides a comprehensive overview of the technology of Motion Control:* Design Considerations* Technologies* Methods to Control Motion* Examples of Motion Control in Systems* A Detailed Vendors List

  7. Integrated Control Using the SOFFT Control Structure

    Science.gov (United States)

    Halyo, Nesim

    1996-01-01

    The need for integrated/constrained control systems has become clearer as advanced aircraft introduced new coupled subsystems such as new propulsion subsystems with thrust vectoring and new aerodynamic designs. In this study, we develop an integrated control design methodology which accomodates constraints among subsystem variables while using the Stochastic Optimal Feedforward/Feedback Control Technique (SOFFT) thus maintaining all the advantages of the SOFFT approach. The Integrated SOFFT Control methodology uses a centralized feedforward control and a constrained feedback control law. The control thus takes advantage of the known coupling among the subsystems while maintaining the identity of subsystems for validation purposes and the simplicity of the feedback law to understand the system response in complicated nonlinear scenarios. The Variable-Gain Output Feedback Control methodology (including constant gain output feedback) is extended to accommodate equality constraints. A gain computation algorithm is developed. The designer can set the cross-gains between two variables or subsystems to zero or another value and optimize the remaining gains subject to the constraint. An integrated control law is designed for a modified F-15 SMTD aircraft model with coupled airframe and propulsion subsystems using the Integrated SOFFT Control methodology to produce a set of desired flying qualities.

  8. ISABELLE control system

    International Nuclear Information System (INIS)

    Humphrey, J.W.; Frankel, R.S.; Niederer, J.A.

    1980-01-01

    Design principles for the Brookhaven ISABELLE control intersecting storage ring accelerator are described. Principal features include a locally networked console and control computer complex, a system wide process data highway, and intelligent local device controllers. Progress to date is summarized

  9. Control Measure Dataset

    Data.gov (United States)

    U.S. Environmental Protection Agency — The EPA Control Measure Dataset is a collection of documents describing air pollution control available to regulated facilities for the control and abatement of air...

  10. Olivo-Cerebellar Controller

    National Research Council Canada - National Science Library

    Bandyopadhyay, Promode R

    2008-01-01

    ...) used in a maneuvering controller or control system of an underwater vehicle. In order to attain the objects described, the present invention provides closed-loop control of multiple inferior olives (IOs...

  11. Birth control pills - combination

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/patientinstructions/000655.htm Birth control pills - combination To use the sharing features on ... both progestin and estrogen. What Are Combination Birth Control Pills? Birth control pills help keep you from ...

  12. Riot Control Agents

    Science.gov (United States)

    ... Submit What's this? Submit Button Facts About Riot Control Agents Interim document Recommend on Facebook Tweet Share Compartir What riot control agents are Riot control agents (sometimes referred to ...

  13. Essure Permanent Birth Control

    Science.gov (United States)

    ... Prosthetics Essure Permanent Birth Control Essure Permanent Birth Control Share Tweet Linkedin Pin it More sharing options ... Print Essure is a a permanently implanted birth control device for women (female sterilization). Implantation of Essure ...

  14. Wisdom Appliance Control System

    Science.gov (United States)

    Hendrick; Jheng, Jyun-Teng; Tsai, Chen-Chai; Liou, Jia-Wei; Wang, Zhi-Hao; Jong, Gwo-Jia

    2017-07-01

    Intelligent appliances wisdom involves security, home care, convenient and energy saving, but the home automation system is still one of the core unit, and also using micro-processing electronics technology to centralized and control the home electrical products and systems, such as: lighting, television, fan, air conditioning, stereo, it composed of front-controller systems and back-controller panels, user using front-controller to control command, and then through the back-controller to powered the device.

  15. Test Control Center (TCC)

    Data.gov (United States)

    Federal Laboratory Consortium — The Test Control Center (TCC) provides a consolidated facility for planning, coordinating, controlling, monitoring, and analyzing distributed test events. ,The TCC...

  16. A new controllable damper with neuro controller

    International Nuclear Information System (INIS)

    Kobayashi, N.; Kobayashi, H.; Saito, O.; Yokoi, R.; Morishita, S.

    1993-01-01

    A new controllable damper is proposed for suppressing the vibration of the piping system for wide frequency range. Electro-Rheological fluid (ER fluid) is enclosed in the damper casing in place of oil, and the apparent viscosity of ER fluid can be varied by applying electric field strength (E.F.S.), which is controlled by an adaptive neural network controller. The shaking test is conducted about a simplified L-shaped piping model with a prototype controllable damper. The test results show the effectiveness of the presented controllable damper for suppressing very small amplitude vibration of the piping system. Furthermore an application of neural network is discussed to control E.F.S. of the electrode. (author)

  17. Digital control programmer for temperature control

    International Nuclear Information System (INIS)

    Rajore, S.B.; Kumar, S.V.

    1993-01-01

    This report describes a PC based digital control programmer for controlling and programming temperature of a high vacuum resistance heating furnace and the software developed to control power using PID algorithm. It also describes the amplifier specially developed to suit the input requirement of the non-standard W5 thermocouple and the software and hardware protections introduced in the system. (author). 5 refs., 8 figs., 1 appendix

  18. Control and optimal control theories with applications

    CERN Document Server

    Burghes, D N

    2004-01-01

    This sound introduction to classical and modern control theory concentrates on fundamental concepts. Employing the minimum of mathematical elaboration, it investigates the many applications of control theory to varied and important present-day problems, e.g. economic growth, resource depletion, disease epidemics, exploited population, and rocket trajectories. An original feature is the amount of space devoted to the important and fascinating subject of optimal control. The work is divided into two parts. Part one deals with the control of linear time-continuous systems, using both transfer fun

  19. Reactor control device

    International Nuclear Information System (INIS)

    Fukami, Haruo; Morimoto, Yoshinori.

    1981-01-01

    Purpose: To operate a reactor always with safety operation while eliminating the danger of tripping. Constitution: In a reactor control device adapted to detect the process variants of a reactor, control a control rod drive controlling system based on the detected signal to thereby control the driving the control rods, control the reactor power and control the electric power generated from an electric generator by the output from the reactor, detection means is provided for the detection of the electric power from said electric generator, and a compensation device is provided for outputting control rod driving compensation signals to the control rod driving controlling system in accordance with the amount of variation in the detected value. (Seki, T.)

  20. Power control device

    International Nuclear Information System (INIS)

    Fukawa, Naohiro.

    1982-01-01

    Purpose: To alleviate the load of an operator by automatically operating the main controller, the speed controller, etc. of a recirculation control system and safely operating them without erroneous operation for long period of time, thereby improving the efficiency of a plant. Constitution: An electric type hydraulic control device controls loads of a turbine and a generator and outputs a control signal also to the main controller of a recirculation flow rate control system. At this time, the main controller is set at an automatic position, and the speed controller receives a recirculation pump speed signal from the main controller at the automatic position. The speed controller outputs a pump speed control signal to the recirculation pump system, and a reactor generates a power corresponding thereto. When the power control is automatically performed by the recirculation flow rate control, an operator sets a rate of change of the recirculation pump speed and the rate of change of the mean power range monitor at a change rate setting unit. Therefore, the control of the recirculation flow rate under the power control can be substantially entirely automated. (Yoshigara, H.)

  1. Process and apparatus for controlling control rods

    International Nuclear Information System (INIS)

    Gebelin, B.; Couture, R.

    1987-01-01

    This process and apparatus is characterized by 2 methods, for examination of cluster of nuclear control rods. Foucault current analyzer which examines fraction by fraction all the control rods. This examination is made by rotation of the cluster. Doubtful rods are then analysed by ultrasonic probe [fr

  2. Robust control charts in statistical process control

    NARCIS (Netherlands)

    Nazir, H.Z.

    2014-01-01

    The presence of outliers and contaminations in the output of the process highly affects the performance of the design structures of commonly used control charts and hence makes them of less practical use. One of the solutions to deal with this problem is to use control charts which are robust

  3. Try to Control Yourself!

    Science.gov (United States)

    Esque, Timm J.

    1996-01-01

    Conventional management controls employees, but successful management encourages and enables employees to control themselves. Where control resides in an organization can be determined by examining its performance tracking systems. Most are management information systems. The best are owned and used by the employees to control and adjust their own…

  4. Evaluation of Internal Control

    OpenAIRE

    Gheorghe Suciu; Pipu-Nicolae Barsan

    2013-01-01

    Performance is indissolubly tied to control. Performance cannot be obtained without a strong, adequate control, regardless if it is in the public or private sector. Control is one of management’s attributes and it must be organized, implemented and evaluated in every company, regardless of its size. Each person from a company participates to a greater or lesser extent in the control activities.

  5. Programmable dc motor controller

    Science.gov (United States)

    Hopwood, J. E.

    1982-11-01

    A portable programmable dc motor controller, with features not available on commercial instruments was developed for controlling fixtures during welding processes. The controller can be used to drive any dc motor having tachometer feedback and motor requirements not exceeding 30 volts, 3 amperes. Among the controller's features are delayed start time, upslope time, speed, and downslope time.

  6. Exotic biological control agents

    NARCIS (Netherlands)

    Hajek, Ann E.; Hurley, Brett P.; Kenis, Marc; Garnas, Jeffrey R.; Bush, Samantha J.; Wingfield, Michael J.; Lenteren, van Joop C.; Cock, Matthew J.W.

    2016-01-01

    Biological control is a valuable and effective strategy for controlling arthropod pests and has been used extensively against invasive arthropods. As one approach for control of invasives, exotic natural enemies from the native range of a pest are introduced to areas where control is needed.

  7. Optimal decoupling controllers revisited

    Czech Academy of Sciences Publication Activity Database

    Kučera, Vladimír

    2013-01-01

    Roč. 42, č. 1 (2013), s. 1-16 ISSN 0324-8569 R&D Projects: GA TA ČR(CZ) TE01020197 Institutional support: RVO:67985556 Keywords : linear systems * fractional representations * decoupling control lers * stabilizing control lers * optimal control lers Subject RIV: BC - Control Systems Theory

  8. Automatic control systems engineering

    International Nuclear Information System (INIS)

    Shin, Yun Gi

    2004-01-01

    This book gives descriptions of automatic control for electrical electronics, which indicates history of automatic control, Laplace transform, block diagram and signal flow diagram, electrometer, linearization of system, space of situation, state space analysis of electric system, sensor, hydro controlling system, stability, time response of linear dynamic system, conception of root locus, procedure to draw root locus, frequency response, and design of control system.

  9. Catastrophes control problem

    International Nuclear Information System (INIS)

    Velichenko, V.V.

    1994-01-01

    The problem of catastrophe control is discussed. Catastrophe control aims to withdraw responsible engineering constructions out of the catastrophe. The mathematical framework of catastrophes control systems is constructed. It determines the principles of systems filling by the concrete physical contents and, simultaneously, permits to employ modern control methods for the synthesis of optimal withdrawal strategy for protected objects

  10. Adaptive Extremum Control and Wind Turbine Control

    DEFF Research Database (Denmark)

    Ma, Xin

    1997-01-01

    This thesis is divided into two parts, i.e., adaptive extremum control and modelling and control of a wind turbine. The rst part of the thesis deals with the design of adaptive extremum controllers for some processes which have the behaviour that process should have as high e ciency as possible...... in parameters, and thus directly lends itself to parameter estimation and adaptive control. The extremum control law is derived based on static optimization of a performance function. For a process with nonlinearity at output the intermediate signal between the linear part and nonlinear part plays an important....... Firstly, it is assumed that the nonlinear processes can be divided into a dynamic linear part and static nonlinear part. Consequently the processes with input nonlinearity and output nonlinearity are treated separately. With the nonlinearity at the input it is easy to set up a model which is linear...

  11. HYDRAULIC SERVO CONTROL MECHANISM

    Science.gov (United States)

    Hussey, R.B.; Gottsche, M.J. Jr.

    1963-09-17

    A hydraulic servo control mechanism of compact construction and low fluid requirements is described. The mechanism consists of a main hydraulic piston, comprising the drive output, which is connected mechanically for feedback purposes to a servo control piston. A control sleeve having control slots for the system encloses the servo piston, which acts to cover or uncover the slots as a means of controlling the operation of the system. This operation permits only a small amount of fluid to regulate the operation of the mechanism, which, as a result, is compact and relatively light. This mechanism is particuiarly adaptable to the drive and control of control rods in nuclear reactors. (auth)

  12. Precision digital control systems

    Science.gov (United States)

    Vyskub, V. G.; Rozov, B. S.; Savelev, V. I.

    This book is concerned with the characteristics of digital control systems of great accuracy. A classification of such systems is considered along with aspects of stabilization, programmable control applications, digital tracking systems and servomechanisms, and precision systems for the control of a scanning laser beam. Other topics explored are related to systems of proportional control, linear devices and methods for increasing precision, approaches for further decreasing the response time in the case of high-speed operation, possibilities for the implementation of a logical control law, and methods for the study of precision digital control systems. A description is presented of precision automatic control systems which make use of electronic computers, taking into account the existing possibilities for an employment of computers in automatic control systems, approaches and studies required for including a computer in such control systems, and an analysis of the structure of automatic control systems with computers. Attention is also given to functional blocks in the considered systems.

  13. CONTROLLING AND BUSINESS EFFICIENCY

    Directory of Open Access Journals (Sweden)

    Tina Vuko

    2013-02-01

    Full Text Available Managing business successfully in dynamic environment requires effective controlling system. Controlling is the process of defining objectives, planning and management control so that every decision maker can act in accordance with agreed objectives. Controlling function as a separate department contributes business efficiency trough ensuring transparency of business result and business processes. Controlling takes place when manager and controller cooperate. The aim of this paper is to investigate the effectiveness of controlling function (i.e. controlling department in Croatian companies and to address the specific features of the function that contribute significantly to overall business performance. The research is conducted on the sample of companies listed on the Regulated market of the Zagreb Stock Exchange. Survey is used as a method to collect the data regarding the controlling function, while financial data necessary for the research are extracted from the published financial statements. Results of the research indicate that controlling department has positive effects on the business performance.

  14. Undergraduate reactor control experiment

    International Nuclear Information System (INIS)

    Edwards, R.M.; Power, M.A.; Bryan, M.

    1992-01-01

    A sequence of reactor and related experiments has been a central element of a senior-level laboratory course at Pennsylvania State University (Penn State) for more than 20 yr. A new experiment has been developed where the students program and operate a computer controller that manipulates the speed of a secondary control rod to regulate TRIGA reactor power. Elementary feedback control theory is introduced to explain the experiment, which emphasizes the nonlinear aspect of reactor control where power level changes are equivalent to a change in control loop gain. Digital control of nuclear reactors has become more visible at Penn State with the replacement of the original analog-based TRIGA reactor control console with a modern computer-based digital control console. Several TRIGA reactor dynamics experiments, which comprise half of the three-credit laboratory course, lead to the control experiment finale: (a) digital simulation, (b) control rod calibration, (c) reactor pulsing, (d) reactivity oscillator, and (e) reactor noise

  15. Control of Bioprocesses

    DEFF Research Database (Denmark)

    Huusom, Jakob Kjøbsted

    2015-01-01

    The purpose of bioprocess control is to ensure that the plant operates as designed. This chapter presents the fundamental principles for control of biochemical processes. Through examples, the selection of manipulated and controlled variables in the classical reactor configurations is discussed, so...... are control objectives and the challenges in obtaining good control of the bioreactor. The objective of this chapter is to discuss the bioreactor control problems and to highlight some general traits that distinguish operation of bioprocesses from operation of processes in the conventional chemical process...... industries. It also provides a number of typical control loops for different objectives. A brief introduction to the general principles of process control, the PID control algorithm is discussed, and the design and effect of tuning are shown in an example. Finally, a discussion of novel, model-free control...

  16. Foundations Of Fuzzy Control

    DEFF Research Database (Denmark)

    Jantzen, Jan

    The objective of this textbook is to acquire an understanding of the behaviour of fuzzy logic controllers. Under certain conditions a fuzzy controller is equivalent to a proportional-integral-derivative (PID) controller. Using that equivalence as a link, the book applies analysis methods from...... linear and nonlinear control theory. In the linear domain, PID tuning methods and stability analyses are transferred to linear fuzzy controllers. The Nyquist plot shows the robustness of different settings of the fuzzy gain parameters. As a result, a fuzzy controller is guaranteed to perform as well...... as any PID controller. In the nonlinear domain, the stability of four standard control surfaces is analysed by means of describing functions and Nyquist plots. The self-organizing controller (SOC) is shown to be a model reference adaptive controller. There is a possibility that a nonlinear fuzzy PID...

  17. Reactor control device

    International Nuclear Information System (INIS)

    Kameda, Akiyuki.

    1979-01-01

    Purpose: To enable three types of controls, that is, level control, scram control and excess reactivity control required for a reactor by a same mechanism by feeding neutron absorber liquid and pressure control gas to several blind pipes provided in the reactor core. Constitution: A plurality of blind pipes are disposed spaced apart in a reactor core and connected by way of injection pipes to a neutron absorber liquid tank. A pressure regulator is connected to the blind pipes, to which pressure control gas is supplied. The neutron absorber liquid used herein consists of sodium, potassium or their alloy, or mercury as a basic substance incorporated with one or more selected from boron, tantalum, rhenium, europium or their compounds. The level control, scram control and excess reactivity control can be attained by moderating the pressure changes in the pressure control gas or by regulating the fluctuation in the liquid level. (Horiughi, T.)

  18. Applied predictive control

    CERN Document Server

    Sunan, Huang; Heng, Lee Tong

    2002-01-01

    The presence of considerable time delays in the dynamics of many industrial processes, leading to difficult problems in the associated closed-loop control systems, is a well-recognized phenomenon. The performance achievable in conventional feedback control systems can be significantly degraded if an industrial process has a relatively large time delay compared with the dominant time constant. Under these circumstances, advanced predictive control is necessary to improve the performance of the control system significantly. The book is a focused treatment of the subject matter, including the fundamentals and some state-of-the-art developments in the field of predictive control. Three main schemes for advanced predictive control are addressed in this book: • Smith Predictive Control; • Generalised Predictive Control; • a form of predictive control based on Finite Spectrum Assignment. A substantial part of the book addresses application issues in predictive control, providing several interesting case studie...

  19. Control rod drives

    International Nuclear Information System (INIS)

    Nakamura, Akira.

    1984-01-01

    Purpose: To enable to monitor the coupling state between a control rod and a control rod drive. Constitution: After the completion of a control rod withdrawal, a coolant pressure is applied to a control rod drive being adjusted so as to raise only the control rod drive and, in a case where the coupling between the control rod drive and the control rod is detached, the former is elevated till it contacts the control rod and then stopped. The actual stopping position is detected by an actual position detection circuit and compared with a predetermined position stored in a predetermined position detection circuit. If both of the positions are not aligned with each other, it is judged by a judging circuit that the control rod and the control rod drives are not combined. (Sekiya, K.)

  20. TFTR diagnostic vacuum controller

    International Nuclear Information System (INIS)

    Olsen, D.; Persons, R.

    1981-01-01

    The TFTR diagnostic vacuum controller (DVC) provides in conjunction with the Central Instrumentation Control and Data Acquisition System (CICADA), control and monitoring for the pumps, valves and gauges associated with each individual diagnostic vacuum system. There will be approximately 50 systems on TFTR. Two standard versions of the controller (A and B) wil be provided in order to meet the requirements of two diagnostic manifold arrangements. All pump and valve sequencing, as well as protection features, will be implemented by the controller

  1. Trust and controlling

    OpenAIRE

    Bieńkowska Agnieszka; Zabłocka-Kluczka Anna

    2016-01-01

    The purpose of this study is to discuss the trust within and towards an organisation in the context of implementation of controlling therein. In this context the essence of trust and its importance in organisation management was presented, as well as trust in the contemporary management methods and concepts. Controlling as a trust-building factor inside an organisation was pointed out. Especially controlling and control were described. Moreover management by considering deviations in controll...

  2. Arduino based laser control

    OpenAIRE

    Bernal Muñoz, Ferran

    2015-01-01

    ARDUINO is a vey usefull platform for prototypes. In this project ARDUINO will be used for controling a Semiconductor Tuneable Laser. [ANGLÈS] Diode laser for communications control based on an Arduino board. Temperature control implementation. Software and hardware protection for the laser implementation. [CASTELLÀ] Control de un láser de comunicaciones ópticas desde el ordenador utilizando una placa Arduino. Implementación de un control de temperatura y protección software y hardware ...

  3. Pneumatic control technology

    International Nuclear Information System (INIS)

    Tae, Seong Gil; Kim, Won Hoe; Nam, Dae Hyun

    1993-03-01

    This book contains property of pneumatic pressure drive, pneumatic pressure device like air cleaning, pressure control, lubricators, air pressure pipe, kinds and function of pneumatic pressure equipment like pneumatic cylinders, pneumatic motor, flow control valve, direction control valve, design of pneumatic control circuit, pneumatic system design, cause and measurement of pneumatic circuit failure, PLC and pneumatic control like introduction and system application and method of PLC programing.

  4. Control rod drives

    International Nuclear Information System (INIS)

    Hayakawa, Hiroyasu.

    1979-01-01

    Purpose: To enable rapid control in a simple circuit by providing a motor control device having an electric capacity capable of simultaneously driving all of the control rods rapidly only in the inserting direction as well as a motor controlling device capable of fine control for the insertion and extraction at usual operation. Constitution: The control rod drives comprise a first motor control device capable of finely controlling the control rods both in inserting and extracting directions, a second motor control device capable of rapidly driving the control rods only in the inserting direction, and a first motor switching circuit and a second motor switching circuit switched by switches. Upon issue of a rapid insertion instruction for the control rods, the second motor switching circuit is closed by the switch and the second motor control circuit and driving motors are connected. Thus, each of the control rod driving motors is driven at a high speed in the inserting direction to rapidly insert all of the control rods. (Yoshino, Y.)

  5. SODR Memory Control Buffer Control ASIC

    Science.gov (United States)

    Hodson, Robert F.

    1994-01-01

    The Spacecraft Optical Disk Recorder (SODR) is a state of the art mass storage system for future NASA missions requiring high transmission rates and a large capacity storage system. This report covers the design and development of an SODR memory buffer control applications specific integrated circuit (ASIC). The memory buffer control ASIC has two primary functions: (1) buffering data to prevent loss of data during disk access times, (2) converting data formats from a high performance parallel interface format to a small computer systems interface format. Ten 144 p in, 50 MHz CMOS ASIC's were designed, fabricated and tested to implement the memory buffer control function.

  6. Controlling chaos in Internet congestion control model

    International Nuclear Information System (INIS)

    Chen Liang; Wang Xiaofan; Han Zhengzhi

    2004-01-01

    The TCP end-to-end congestion control plus RED router queue management can be modeled as a discrete-time dynamical system, which may create complex bifurcating and chaotic behavior. Based on the basic features of the TCP-RED model, we propose a time-dependent delayed feedback control algorithm to control chaos in the system by perturbing the accessible RED parameter p max . This method is able to stabilized a router queue occupancy at a level without knowing the exact knowledge of the network. Further, we study the situation of the presence of the UDP traffic

  7. Generic device controller for accelerator control systems

    International Nuclear Information System (INIS)

    Mariotti, R.; Buxton, W.; Frankel, R.; Hoff, L.

    1987-01-01

    A new distributed intelligence control system has become operational at the AGS for transport, injection, and acceleration of heavy ions. A brief description of the functionality of the physical devices making up the system is given. An attempt has been made to integrate the devices for accelerator specific interfacing into a standard microprocessor system, namely, the Universal Device Controller (UDC). The main goals for such a generic device controller are to provide: local computing power; flexibility to configure; and real time event handling. The UDC assemblies and software are described

  8. Controlling chaos in Internet congestion control model

    Energy Technology Data Exchange (ETDEWEB)

    Chen Liang E-mail: chenmoon110@yahoo.com.cn; Wang Xiaofan; Han Zhengzhi

    2004-07-01

    The TCP end-to-end congestion control plus RED router queue management can be modeled as a discrete-time dynamical system, which may create complex bifurcating and chaotic behavior. Based on the basic features of the TCP-RED model, we propose a time-dependent delayed feedback control algorithm to control chaos in the system by perturbing the accessible RED parameter p{sub max}. This method is able to stabilized a router queue occupancy at a level without knowing the exact knowledge of the network. Further, we study the situation of the presence of the UDP traffic.

  9. Vehicle Dynamics and Control

    CERN Document Server

    Rajamani, Rajesh

    2012-01-01

    Vehicle Dynamics and Control provides a comprehensive coverage of vehicle control systems and the dynamic models used in the development of these control systems. The control system applications covered in the book include cruise control, adaptive cruise control, ABS, automated lane keeping, automated highway systems, yaw stability control, engine control, passive, active and semi-active suspensions, tire-road friction coefficient estimation, rollover prevention, and hybrid electric vehicle. In developing the dynamic model for each application, an effort is made to both keep the model simple enough for control system design but at the same time rich enough to capture the essential features of the dynamics. A special effort has been made to explain the several different tire models commonly used in literature and to interpret them physically. In the second edition of the book, chapters on roll dynamics, rollover prevention and hybrid electric vehicles have been added, and the chapter on electronic stability co...

  10. Balancing Trust and Control

    DEFF Research Database (Denmark)

    Jagd, Søren

    This paper focuses on the leadership challenge of balancing trust and control. The relation between trust and control has for a long time been a puzzling issue for management researchers. In the paper I first show that there has been a dramatic change in the way the relation between trust...... and control has been conceptualized in trust research. While the relation between trust and control earlier was conceptualized as a more or less stable balance between trust and control, more recent research conceptualizes the relation between trust and control more as a dynamical process that involves...... an ongoing process of balancing the relation between trust and control. Second, taking the departure in the recent conceptualization of the balance between trust and control as an interactive process I discuss the challenges for management in handling this more subtle balancing of trust and control...

  11. CAMAC multipurpose microprocessor controller

    International Nuclear Information System (INIS)

    Belyakova, M.P.; Nemesh, T.; Buj Zoan Chong.

    1978-01-01

    The use of CAMAC controllers in an autonomous system of data acquisition and measurement is considered. The system consists of a control intelligence controller, memory modules, and user modules in the CAMAC standard. The controller and all the modules have an output into the highway and this permits to exchange data among them without using special external cables. To increase the servicing rate, an auxiliary controller which has direct access to memory and controls the user modules, is additionally connected to the data acquisition and measurement system. In this case, the intelligence controller is passive. The system of data acquisition can be realized in the form of a multiple system with branch usage. The controller module width is three units, and the controller incorporates the Intel-8080-type microprocessor and the following interfaces: of CAMAC highways, of interruption, of memory bootstrap, and of data sequence channel

  12. Control rod shutdown system

    International Nuclear Information System (INIS)

    Miyamoto, Yoshiyuki; Higashigawa, Yuichi.

    1996-01-01

    The present invention provides a control rod terminating system in a BWR type nuclear power plant, which stops an induction electric motor as rapidly as possible to terminate the control rods. Namely, the control rod stopping system controls reactor power by inserting/withdrawing control rods into a reactor by driving them by the induction electric motor. The system is provided with a control device for controlling the control rods and a control device for controlling the braking device. The control device outputs a braking operation signal for actuating the braking device during operation of the control rods to stop the operation of the control rods. Further, the braking device has at least two kinds of breaks, namely, a first and a second brakes. The two kinds of brakes are actuated by receiving the brake operation signals at different timings. The brake device is used also for keeping the control rods after the stopping. Even if a stopping torque of each of the breaks is small, different two kinds of brakes are operated at different timings thereby capable of obtaining a large stopping torque as a total. (I.S.)

  13. Plasma position control device

    International Nuclear Information System (INIS)

    Takase, Haruhiko.

    1987-01-01

    Purpose: To conduct position control stably to various plasmas and reduce the burden on the control coil power source. Constitution: Among the proportional, integration and differentiation controls, a proportional-differentiation control section and an integration control section are connected in parallel. Then, a signal switching circuit is disposed to the control signal input section for the proportional-differentiation control section such that either a present position of plasmas or deviation between the present plasma position and an aimed value can be selected as a control signal depending on the control procedures or the state of the plasmas. For instance, if a rapid response is required for the control, the deviation between the present plasma position and the aimed value is selected as the input signal to conduct proportional, integration and differentiation controls. While on the other hand, if it is intended to reduce the burden on the control coil power source, it is adapted such that the control signal inputted to the proportional-differentiation control section itself can select the present plasma position. (Yoshihara, H.)

  14. Control rod assembly

    International Nuclear Information System (INIS)

    Takahashi, Akio.

    1982-01-01

    Purpose: To enable reliable insertion and drops of control rods, as well as insure a sufficient flow rate of coolants flowing through the control rods for attaining satisfactory cooling thereof to enable relexation of thermal stress resulted to rectifying mechanisms or the likes. Constitution: To the outer circumference of a control rod contained vertically movably within a control rod guide tube, resistive members are retractably provided in such a way as to project to close the gap between outer circumference of the control rod and the inner surface of the control rod guide tube upon engagement of a gripper of control rod drives, and retract upon release of the engagement of the gripper. Thus, since the resistive members project to provide a greater resistance to the coolants flowing between them and the control rod guide tube in the normal operation where the gripper is engaged to drive the control rod by the control rod drives, a major part of the coolant flowing into the control rod guide tube flows into the control rod. This enables to cool the control rod effectively and make the temperature distribution uniform for the coolant flowing from the upper end of the control rod guide tube to thereby attain the relaxation of the thermal stress resulted in the rectifying mechanisms or the likes. (Moriyama, K.)

  15. Control rod displacement

    International Nuclear Information System (INIS)

    Nakazato, S.

    1987-01-01

    This patent describes a nuclear reactor including a core, cylindrical control rods, a single support means supporting the control rods from their upper ends in spaced apart positions and movable for displacing the control rods in their longitudinal direction between a first end position in which the control rods are fully inserted into the core and a second end position in which the control rods are retracted from the core, and guide means contacting discrete regions of the outer surface of each control rod at least when the control rods are in the vicinity of the second end position. The control rods are supported by the support means for longitudinal movement without rotation into and out of the core relative to the guide means to thereby cause the outer surface of the control rods to experience wear as a result of sliding contact with the guide means. The support means are so arranged with respect to the core and the guide means that it is incapable of rotation relative to the guide means. The improvement comprises displacement means being operatively coupled to a respective one of the control rods for periodically rotating the control rod in a single angular direction through an angle selected to change the locations on the outer surfaces of the control rods at which the control rods are contacted by the guide means during subsequent longitudinal movement of the control rods

  16. Intelligent control-III: fuzzy control system

    International Nuclear Information System (INIS)

    Nagrial, M.H.

    2004-01-01

    During the last decade or so, fuzzy logic control (FLC) has emerged as one of the most active and fruitful areas of research and development. The applications include industrial process control to medical diagnostic and financial markets. Many consumer products using this technology are available in the market place. FLC is best suited to complex ill-defined processes that can be controlled by a skilled human operator without much knowledge of their underlying dynamics. This lecture will cover the basic architecture and the design methodology of fuzzy logic controllers. FLC will be strongly based on the concepts of fuzzy set theory, introduced in first lecture. Some practical applications will also be discussed and presented. (author)

  17. Control and automation systems

    International Nuclear Information System (INIS)

    Schmidt, R.; Zillich, H.

    1986-01-01

    A survey is given of the development of control and automation systems for energy uses. General remarks about control and automation schemes are followed by a description of modern process control systems along with process control processes as such. After discussing the particular process control requirements of nuclear power plants the paper deals with the reliability and availability of process control systems and refers to computerized simulation processes. The subsequent paragraphs are dedicated to descriptions of the operating floor, ergonomic conditions, existing systems, flue gas desulfurization systems, the electromagnetic influences on digital circuits as well as of light wave uses. (HAG) [de

  18. Electricity sequence control

    International Nuclear Information System (INIS)

    Shin, Heung Ryeol

    2010-03-01

    The contents of the book are introduction of control system, like classification and control signal, introduction of electricity power switch, such as push-button and detection switch sensor for induction type and capacitance type machinery for control, solenoid valve, expression of sequence and type of electricity circuit about using diagram, time chart, marking and term, logic circuit like Yes, No, and, or and equivalence logic, basic electricity circuit, electricity sequence control, added condition, special program control about choice and jump of program, motor control, extra circuit on repeat circuit, pause circuit in a conveyer, safety regulations and rule about classification of electricity disaster and protective device for insulation.

  19. VOC emissions control systems

    International Nuclear Information System (INIS)

    Spessard, J.E.

    1993-01-01

    The air pollution control equipment marketplace offers many competing technologies for controlling emissions of volatile organic compounds (VOC) in air. If any technology was economically and technically superior under all conditions, it would be the only one on the market. In fact, each technology used to control VOCs is superior under some set of conditions. The reasons for choosing one control technology over another are situation-specific. Some general guidelines to VOC control technologies and the situations where each may be appropriate are presented in this article. The control technologies and applications are summarized in a table

  20. Programmable Digital Controller

    Science.gov (United States)

    Wassick, Gregory J.

    2012-01-01

    An existing three-channel analog servo loop controller has been redesigned for piezoelectric-transducer-based (PZT-based) etalon control applications to a digital servo loop controller. This change offers several improvements over the previous analog controller, including software control over proportional-integral-derivative (PID) parameters, inclusion of other data of interest such as temperature and pressure in the control laws, improved ability to compensate for PZT hysteresis and mechanical mount fluctuations, ability to provide pre-programmed scanning and stepping routines, improved user interface, expanded data acquisition, and reduced size, weight, and power.

  1. Robot welding process control

    Science.gov (United States)

    Romine, Peter L.

    1991-01-01

    This final report documents the development and installation of software and hardware for Robotic Welding Process Control. Primary emphasis is on serial communications between the CYRO 750 robotic welder, Heurikon minicomputer running Hunter & Ready VRTX, and an IBM PC/AT, for offline programming and control and closed-loop welding control. The requirements for completion of the implementation of the Rocketdyne weld tracking control are discussed. The procedure for downloading programs from the Intergraph, over the network, is discussed. Conclusions are made on the results of this task, and recommendations are made for efficient implementation of communications, weld process control development, and advanced process control procedures using the Heurikon.

  2. Control system design method

    Science.gov (United States)

    Wilson, David G [Tijeras, NM; Robinett, III, Rush D.

    2012-02-21

    A control system design method and concomitant control system comprising representing a physical apparatus to be controlled as a Hamiltonian system, determining elements of the Hamiltonian system representation which are power generators, power dissipators, and power storage devices, analyzing stability and performance of the Hamiltonian system based on the results of the determining step and determining necessary and sufficient conditions for stability of the Hamiltonian system, creating a stable control system based on the results of the analyzing step, and employing the resulting control system to control the physical apparatus.

  3. Robust Self Tuning Controllers

    DEFF Research Database (Denmark)

    Poulsen, Niels Kjølstad

    1985-01-01

    The present thesis concerns robustness properties of adaptive controllers. It is addressed to methods for robustifying self tuning controllers with respect to abrupt changes in the plant parameters. In the thesis an algorithm for estimating abruptly changing parameters is presented. The estimator...... has several operation modes and a detector for controlling the mode. A special self tuning controller has been developed to regulate plant with changing time delay.......The present thesis concerns robustness properties of adaptive controllers. It is addressed to methods for robustifying self tuning controllers with respect to abrupt changes in the plant parameters. In the thesis an algorithm for estimating abruptly changing parameters is presented. The estimator...

  4. Control integral systems; Sistemas integrales de control

    Energy Technology Data Exchange (ETDEWEB)

    Burgos, Estrella [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1999-12-31

    Almost two third of the electric power generation in Mexico are obtained from hydrocarbons, for that reasons Comision Federal de Electricidad (CFE) dedicated special commitment in modernizing the operation of fossil fuel central stations. In attaining this objective the control systems play a fundamental roll, from them depend a good share of the reliability and the efficiency of the electric power generation process, as well as the extension of the equipment useful life. Since 1984 the Instituto de Investigaciones Electricas (IIE) has been working, upon the request of CFE, on the development of digital control systems. To date it has designed and implemented a logic control system for gas burners, which controls 32 burners of the Unit 4 boiler of the Generation Central of Valle de Mexico and two systems for distributed control for two combined cycle central stations, which are: Dos Bocas, Veracruz Combined cycle central, and Gomez Palacio, Durango combined cycle central. With these two developments the IIE enters the World tendency of implementing distributed control systems for the fossil fuel power central update [Espanol] Casi las dos terceras partes de la generacion electrica en Mexico se obtienen a partir de hidrocarburos, es por eso que la Comision Federal de Electricidad (CFE) puso especial empeno en modernizar la operacion de las centrales termoelectricas de combustibles fosiles. En el logro de este objetivo los sistemas de control desempenan un papel fundamental, de ellos depende una buena parte la confiabilidad y la eficiencia en el proceso de generacion de energia electrica, asi como la prolongacion de la vida util de los equipos. Desde 1984 el Instituto de Investigaciones Electricas (IIE) ha trabajado, a solicitud de la CFE, en el desarrollo de sistemas digitales de control. A la fecha se han disenado e implantado un sistema de control logico de quemadores de gas, el cual controla 32 quemadores de la caldera de la unidad 4 de la central de generacion

  5. Control integral systems; Sistemas integrales de control

    Energy Technology Data Exchange (ETDEWEB)

    Burgos, Estrella [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1998-12-31

    Almost two third of the electric power generation in Mexico are obtained from hydrocarbons, for that reasons Comision Federal de Electricidad (CFE) dedicated special commitment in modernizing the operation of fossil fuel central stations. In attaining this objective the control systems play a fundamental roll, from them depend a good share of the reliability and the efficiency of the electric power generation process, as well as the extension of the equipment useful life. Since 1984 the Instituto de Investigaciones Electricas (IIE) has been working, upon the request of CFE, on the development of digital control systems. To date it has designed and implemented a logic control system for gas burners, which controls 32 burners of the Unit 4 boiler of the Generation Central of Valle de Mexico and two systems for distributed control for two combined cycle central stations, which are: Dos Bocas, Veracruz Combined cycle central, and Gomez Palacio, Durango combined cycle central. With these two developments the IIE enters the World tendency of implementing distributed control systems for the fossil fuel power central update [Espanol] Casi las dos terceras partes de la generacion electrica en Mexico se obtienen a partir de hidrocarburos, es por eso que la Comision Federal de Electricidad (CFE) puso especial empeno en modernizar la operacion de las centrales termoelectricas de combustibles fosiles. En el logro de este objetivo los sistemas de control desempenan un papel fundamental, de ellos depende una buena parte la confiabilidad y la eficiencia en el proceso de generacion de energia electrica, asi como la prolongacion de la vida util de los equipos. Desde 1984 el Instituto de Investigaciones Electricas (IIE) ha trabajado, a solicitud de la CFE, en el desarrollo de sistemas digitales de control. A la fecha se han disenado e implantado un sistema de control logico de quemadores de gas, el cual controla 32 quemadores de la caldera de la unidad 4 de la central de generacion

  6. Embedded controllers for local board-control

    CERN Document Server

    Neufeld, Niko; Mini, Giuseppe; Sannino, Mario; Guzik, Zbigniew; Jacobsson, Richard; Jost, Beat

    2005-01-01

    The LHCb experiment at CERN has a large number of custom electronic boards performing high-speed data-processing. Like in any large experiment the control and monitoring of these crate-mounted boards must be integrated into the overall control-system. Traditionally this has been done by using buses like VME on the back-plane of the crates. LHCb has chosen to equip every board with an embedded micro-controller and connecting them in a large Local Area Network. The intelligence of these devices allows complex (soft) real-time control and monitoring, required for modern powerful FPGA driven electronics. Moreover each board has its own, isolated control access path, which increases the robustness of the entire system. The system is now in pre-production at several sites and will go into full production during next year. The hardware and software will be discussed and experiences from the R&D and pre-production will be reviewed, with an emphasis on advantages and difficulties of this approach to board-control.

  7. Advanced Emissions Control Development Program: Mercury Control

    International Nuclear Information System (INIS)

    Evans, A.P.; Redinger, K.W.; Holmes, M.J.

    1997-07-01

    McDermott Technology, Inc. (a subsidiary of Babcock ampersand Wilcox) is conducting the Advanced Emissions Control Development Project (AECDP) which is aimed at the development of practical, cost-effective strategies for reducing the emissions of hazardous air pollutants (HAPS) from coal-fired electric utility plants. The need for such controls may arise as the US Environmental Protection Agency (EPA) proceeds with implementation of requirements set forth in the Clean Air Act Amendments (CAAA's) of 1990. Promulgation of air toxics emissions regulations for electric utility plants could dramatically impact utilities burning coal, their industrial and residential customers, and the coal industry. AECDP project work will supply the information needed by utilities to respond to potential HAPs regulations in a timely, cost-effective, enviromnentally-sound manner which supports the continued use of the Nation's abundant reserves of coal, such as those in the State of Ohio. The development work is being carried out using the 10 MW Clean Environment Development Facility wherein air toxics emissions control strategies can be developed under controlled conditions. The specific objectives of the project are to (1) measure and understand production and partitioning of air toxics species for a variety of coals, (2) optimize the air toxics removal performance of conventional flue gas cleanup systems, (3) develop advanced air toxics emissions control concepts, (4) develop and validate air toxics emissions measurement and monitoring techniques, and (5) establish a comprehensive, self-consistent air toxics data library. This project is supported by the Department of Energy, the Ohio Coal Development Office within the Ohio Department of Development and Babcock ampersand Wilcox. A comprehensive assessment of HAP emissions from coal-fired electric utility boilers sponsored by the Department of Energy and the Electric Power Research Institute concluded that with the exception of

  8. Control room design

    International Nuclear Information System (INIS)

    Zinke, H.

    1980-01-01

    To control a 1300 megawatt nuclear power plant, about 15000 plant parameters must be collected together to control and operate the plant. The control room design therefore is of particular importance. The main design criteria are: Required functions of the power plant process - Level of Automation - Ergonomics - Available Technology. Extensive analysis has resulted in a control room design method. This ensures that an objective solution will be reached. Resulting from this methodical approach are: 1. Scope, position and appearance of the instrumentation. 2. Scope, position and appearance of the operator controls. Process analysis dictates what instrumentation and operator controls are needed. The priority and importance of the control and instrumentation (this we define as the utilisation areas), dictates the rough layout of the control room. (orig./RW)

  9. Intelligent Mission Controller Node

    National Research Council Canada - National Science Library

    Perme, David

    2002-01-01

    The goal of the Intelligent Mission Controller Node (IMCN) project was to improve the process of translating mission taskings between real-world Command, Control, Communications, Computers, and Intelligence (C41...

  10. NGS Survey Control Map

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NGS Survey Control Map provides a map of the US which allows you to find and display geodetic survey control points stored in the database of the National...

  11. Method of controlling reactivity

    International Nuclear Information System (INIS)

    Tochihara, Hiroshi.

    1982-01-01

    Purpose: To improve the reactivity controlling characteristics by artificially controlling the leakage of neutron from a reactor and providing a controller for controlling the reactivity. Method: A reactor core is divided into several water gaps to increase the leakage of neutron, its reactivity is reduced, a gas-filled control rod or a fuel assembly is inserted into the gap as required, the entire core is coupled in a system to reduce the leakage of the neutron, and the reactivity is increased. The reactor shutdown is conducted by the conventional control rod, and to maintain critical state, boron density varying system is used together. Futher, a control rod drive is used with that similar to the conventional one, thereby enabling fast reactivity variation, and the positive reactivity can be obtained by the insertion, thereby improving the reactivity controlling characteristics. (Yoshihara, H.)

  12. The remote control system

    International Nuclear Information System (INIS)

    Jansweijer, P.P.M.

    1988-01-01

    The remote-control system is applied in order to control various signals in the car of the spectrometer at distance. The construction (hardware and software) as well as the operation of the system is described. (author). 20 figs

  13. Systems and Control Engineering

    Indian Academy of Sciences (India)

    activities directed towards the students and the general public. Designed .... attention has been directed towards the use of control and automation to mitigate the effects of those ... The history of automatic control can be divided into four main.

  14. A modular control system

    International Nuclear Information System (INIS)

    Cruz, B.; Drexler, J.; Olcese, G.; Santome, D.

    1990-01-01

    The main objective of the modular control system is to provide the requirements to most of the processes supervision and control applications within the industrial automatization area. The design is based on distribution, modulation and expansion concepts. (Author) [es

  15. Birth Control Shot

    Science.gov (United States)

    ... Health Food & Fitness Diseases & Conditions Infections Drugs & Alcohol School & Jobs Sports Expert Answers (Q&A) Staying Safe Videos for Educators Search English Español Birth Control Shot KidsHealth / For Teens / Birth Control Shot What's ...

  16. Birth Control Ring

    Science.gov (United States)

    ... Health Food & Fitness Diseases & Conditions Infections Drugs & Alcohol School & Jobs Sports Expert Answers (Q&A) Staying Safe Videos for Educators Search English Español Birth Control Ring KidsHealth / For Teens / Birth Control Ring What's ...

  17. Birth Control Pill

    Science.gov (United States)

    ... Health Food & Fitness Diseases & Conditions Infections Drugs & Alcohol School & Jobs Sports Expert Answers (Q&A) Staying Safe Videos for Educators Search English Español Birth Control Pill KidsHealth / For Teens / Birth Control Pill What's ...

  18. Birth Control Patch

    Science.gov (United States)

    ... Health Food & Fitness Diseases & Conditions Infections Drugs & Alcohol School & Jobs Sports Expert Answers (Q&A) Staying Safe Videos for Educators Search English Español Birth Control Patch KidsHealth / For Teens / Birth Control Patch What's ...

  19. Birth control pills overdose

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/article/002599.htm Birth control pill overdose To use the sharing features on ... the medicine was prescribed for the person Poison Control Your local poison center can be reached directly ...

  20. Poison Control Centers

    Science.gov (United States)

    ... 1222 immediately. Name State American Association of Poison Control Centers Address AAPCC Central Office NOT A POISON ... not for emergency use. Arkansas ASPCA Animal Poison Control Center Address 1717 S. Philo Road, Suite 36 Urbana, ...

  1. Cholera Prevention and Control

    Science.gov (United States)

    ... name=”commit” type=”submit” value=”Submit” /> Prevention & Control Recommend on Facebook Tweet Share Compartir Prevention of ... of cholera and other diarrheal disease prevention. Prevention & Control Topics Ending Cholera: The Global Roadmap to 2030 ...

  2. SPECT quality control tests

    International Nuclear Information System (INIS)

    Robilotta, C.C.; Rebelo, M.F.S.; Oliveira, M.A.; Abe, R.

    1987-01-01

    Quality control tests of tomographic system composed by a rotatory chamber (CGR Gammatomome T-9000) and a microcomputer are presented. Traditional quality control tests for scintilation chambers and specific tests for tomographic systems are reported. (M.A.C.) [pt

  3. Identification for Control

    DEFF Research Database (Denmark)

    Tøffner-Clausen, S.

    1995-01-01

    Identification of model error bounds for robust control design has recently achieved much attention.......Identification of model error bounds for robust control design has recently achieved much attention....

  4. The LHCb Run Control

    CERN Document Server

    Alessio, F; Callot, O; Duval, P-Y; Franek, B; Frank, M; Galli, D; Gaspar, C; v Herwijnen, E; Jacobsson, R; Jost, B; Neufeld, N; Sambade, A; Schwemmer, R; Somogyi, P

    2010-01-01

    LHCb has designed and implemented an integrated Experiment Control System. The Control System uses the same concepts and the same tools to control and monitor all parts of the experiment: the Data Acquisition System, the Timing and the Trigger Systems, the High Level Trigger Farm, the Detector Control System, the Experiment's Infrastructure and the interaction with the CERN Technical Services and the Accelerator. LHCb's Run Control, the main interface used by the experiment's operator, provides access in a hierarchical, coherent and homogeneous manner to all areas of the experiment and to all its sub-detectors. It allows for automated (or manual) configuration and control, including error recovery, of the full experiment in its different running modes. Different instances of the same Run Control interface are used by the various sub-detectors for their stand-alone activities: test runs, calibration runs, etc. The architecture and the tools used to build the control system, the guidelines and components provid...

  5. Fine motor control

    Science.gov (United States)

    ... gross (large, general) motor control. An example of gross motor control is waving an arm in greeting. Problems ... out the child's developmental age. Children develop fine motor skills over time, by practicing and being taught. To ...

  6. Cell Control Engineering

    DEFF Research Database (Denmark)

    Lynggaard, Hans Jørgen Birk; Alting, Leo

    1996-01-01

    The engineering process of creating cell control systems is described, and a Cell Control Engineering (CCE) concept is defined. The purpose is to assist people, representing different disciplines in the organisation, to implement cell controllers by addressing the complexity of having many systems...... in physically and logically different and changing manufacturing environments. The defined CCE concept combines state-of-the-art of commercially available enabling technologies for automation system software development, generic cell control models and guidelines for the complete engineering process...

  7. System for controlling apnea

    Science.gov (United States)

    Holzrichter, John F

    2015-05-05

    An implanted stimulation device or air control device are activated by an external radar-like sensor for controlling apnea. The radar-like sensor senses the closure of the air flow cavity, and associated control circuitry signals (1) a stimulator to cause muscles to open the air passage way that is closing or closed or (2) an air control device to open the air passage way that is closing or closed.

  8. Strategies for humidity control

    Energy Technology Data Exchange (ETDEWEB)

    Baumgarth, S

    1987-01-01

    Humidity and temperature control in air-conditioning systems mostly involves coupled closed-loop control circuits. The author discusses their uncoupling and resulting consequences as well as energy-optimized control of recirculation air flaps or enthalpy recovering systems (h-x control) in detail. Special reference is made of the application of the DDC technology and its scope, limits and preconditions. In conclusions, the author presents pertinent measurement results. (orig.).

  9. Defining Quantum Control Flow

    OpenAIRE

    Ying, Mingsheng; Yu, Nengkun; Feng, Yuan

    2012-01-01

    A remarkable difference between quantum and classical programs is that the control flow of the former can be either classical or quantum. One of the key issues in the theory of quantum programming languages is defining and understanding quantum control flow. A functional language with quantum control flow was defined by Altenkirch and Grattage [\\textit{Proc. LICS'05}, pp. 249-258]. This paper extends their work, and we introduce a general quantum control structure by defining three new quantu...

  10. Quality control in radiotherapy

    International Nuclear Information System (INIS)

    Batalla, A.

    2009-01-01

    The authors discuss the modalities and periodicities of internal quality control on radiotherapy installations. They indicate the different concerned systems and the aspects and items to be controlled (patient and personnel security, apparatus mechanical characteristics, beam quality, image quality, isodose and irradiation duration calculation, data transfer). They present the measurement instruments and tools used for the mechanical controls, dose measurement, beam homogeneity and symmetry, anatomic data acquisition systems, and dose distribution and control imagery calculation

  11. Fuzzy Control Tutorial

    DEFF Research Database (Denmark)

    Dotoli, M.; Jantzen, Jan

    1999-01-01

    The tutorial concerns automatic control of an inverted pendulum, especially rule based control by means of fuzzy logic. A ball balancer, implemented in a software simulator in Matlab, is used as a practical case study. The objectives of the tutorial are to teach the basics of fuzzy control......, and to show how to apply fuzzy logic in automatic control. The tutorial is distance learning, where students interact one-to-one with the teacher using e-mail....

  12. Control rod velocity limiter

    International Nuclear Information System (INIS)

    Cearley, J.E.; Carruth, J.C.; Dixon, R.C.; Spencer, S.S.; Zuloaga, J.A. Jr.

    1986-01-01

    This patent describes a velocity control arrangement for a reciprocable, vertically oriented control rod for use in a nuclear reactor in a fluid medium, the control rod including a drive hub secured to and extending from one end therefrom. The control device comprises: a toroidally shaped control member spaced from and coaxially positioned around the hub and secured thereto by a plurality of spaced radial webs thereby providing an annular passage for fluid intermediate the hub and the toroidal member spaced therefrom in coaxial position. The side of the control member toward the control rod has a smooth generally conical surface. The side of the control member away from the control rod is formed with a concave surface constituting a single annular groove. The device also comprises inner and outer annular vanes radially spaced from one another and spaced from the side of the control member away from the control rod and positioned coaxially around and spaced from the hub and secured thereto by spaced radial webs thereby providing an annular passage for fluid intermediate the hub and the vanes. The vanes are angled toward the control member, the outer edge of the inner vane being closer to the control member and the inner edge of the outer vane being closer to the control member. When the control rod moves in the fluid in the direction toward the drive hub the vanes direct a flow of fluid turbulence which provides greater resistance to movement of the control rod in the direction toward the drive hub than in the other direction

  13. Tokamak control simulator

    International Nuclear Information System (INIS)

    Edelbaum, T.N.; Serben, S.; Var, R.E.

    1976-01-01

    A computer model of a tokamak experimental power reactor and its control system is being constructed. This simulator will allow the exploration of various open loop and closed loop strategies for reactor control. This paper provides a brief description of the simulator and some of the potential control problems associated with this class of tokamaks

  14. Reactor control system. PWR

    International Nuclear Information System (INIS)

    2009-01-01

    At present, 23 units of PWR type reactors have been operated in Japan since the start of Mihama Unit 1 operation in 1970 and various improvements have been made to upgrade operability of power stations as well as reliability and safety of power plants. As the share of nuclear power increases, further improvements of operating performance such as load following capability will be requested for power stations with more reliable and safer operation. This article outlined the reactor control system of PWR type reactors and described the control performance of power plants realized with those systems. The PWR control system is characterized that the turbine power is automatic or manually controlled with request of the electric power system and then the nuclear power is followingly controlled with the change of core reactivity. The system mainly consists of reactor automatic control system (control rod control system), pressurizer pressure control system, pressurizer water level control system, steam generator water level control system and turbine bypass control system. (T. Tanaka)

  15. Process control program development

    International Nuclear Information System (INIS)

    Dameron, H.J.

    1985-01-01

    This paper details the development and implementation of a ''Process Control Program'' at Duke Power's three nuclear stations - Oconee, McGuire, and Catawba. Each station is required by Technical Specification to have a ''Process Control Program'' (PCP) to control all dewatering and/or solidification activities for radioactive wastes

  16. Adaptive LQG controller tuning

    Czech Academy of Sciences Publication Activity Database

    Novák, Miroslav; Böhm, Josef; Nedoma, Petr; Tesař, Ludvík

    2003-01-01

    Roč. 150, č. 6 (2003), s. 655-665 ISSN 1350-2379 R&D Projects: GA ČR GA102/02/0204; GA AV ČR IBS1075102 Institutional research plan: CEZ:AV0Z1075907 Keywords : adaptive controller * LQG controller * controller design Subject RIV: JB - Sensors, Measurment, Regulation Impact factor: 0.745, year: 2003

  17. Survivability via Control Objectives

    Energy Technology Data Exchange (ETDEWEB)

    CAMPBELL,PHILIP L.

    2000-08-11

    Control objectives open an additional front in the survivability battle. A given set of control objectives is valuable if it represents good practices, it is complete (it covers all the necessary areas), and it is auditable. CobiT and BS 7799 are two examples of control objective sets.

  18. Worldwide Report, Arms Control

    Science.gov (United States)

    1985-09-21

    Intersoft- ware, Logic Control Control y Aplicaciones , Dielsa, Eliop, EISA, Sainco CTNE, Fagor Electronica, Standard CTNE, Fagor Electronica, Piher...regulation systems Industrial turbine of advanced design Alfa Sewing Machines Control y Aplicaciones , Danobat, Etxe-Tar C02, CO and ultraviolet lasers

  19. FFTF control system experience

    International Nuclear Information System (INIS)

    Warrick, R.P.

    1981-01-01

    The FFTF control systems provide control equipment for safe and efficient operation of the plant. For convenience, these systems will be divided into three parts for discussions: (1) Plant Protection System (PPS); (2) Plant Control System (PCS); and (3) General Observations. Performance of each of these systems is discussed

  20. Atomic Energy Control Act

    International Nuclear Information System (INIS)

    1970-01-01

    This act provides for the establishment of the Atomic Energy Control Board. The board is responsible for the control and supervision of the development, application and use of atomic energy. The board is also considered necessary to enable Canada to participate effectively in measures of international control of atomic energy

  1. Quality control of radiopharmaceuticals

    International Nuclear Information System (INIS)

    Verdera, E.S.

    1994-01-01

    The quality control of radiopharmaceuticals is based in physics, physics-chemical and biological controls. Between the different controls can be enumerated the following: visual aspect,side, number of particle beams,activity,purity,ph,isotonicity,sterility,radioinmunoessay,toxicity,stability and clinical essay

  2. Optimisation of load control

    International Nuclear Information System (INIS)

    Koponen, P.

    1998-01-01

    Electricity cannot be stored in large quantities. That is why the electricity supply and consumption are always almost equal in large power supply systems. If this balance were disturbed beyond stability, the system or a part of it would collapse until a new stable equilibrium is reached. The balance between supply and consumption is mainly maintained by controlling the power production, but also the electricity consumption or, in other words, the load is controlled. Controlling the load of the power supply system is important, if easily controllable power production capacity is limited. Temporary shortage of capacity causes high peaks in the energy price in the electricity market. Load control either reduces the electricity consumption during peak consumption and peak price or moves electricity consumption to some other time. The project Optimisation of Load Control is a part of the EDISON research program for distribution automation. The following areas were studied: Optimization of space heating and ventilation, when electricity price is time variable, load control model in power purchase optimization, optimization of direct load control sequences, interaction between load control optimization and power purchase optimization, literature on load control, optimization methods and field tests and response models of direct load control and the effects of the electricity market deregulation on load control. An overview of the main results is given in this chapter

  3. Fluid control valves

    International Nuclear Information System (INIS)

    Rankin, J.

    1980-01-01

    A fluid control valve is described in which it is not necessary to insert a hand or a tool into the housing to remove the valve seat. Such a valve is particularly suitable for the control of radioactive fluids since maintenance by remote control is possible. (UK)

  4. Neutron generator control system

    International Nuclear Information System (INIS)

    Peelman, H.E.; Bridges, J.R.

    1981-01-01

    A method is described of controlling the neutron output of a neutron generator tube used in neutron well logging. The system operates by monitoring the target beam current and comparing a function of this current with a reference voltage level to develop a control signal used in a series regulator to control the replenisher current of the neutron generator tube. (U.K.)

  5. Optimisation of load control

    Energy Technology Data Exchange (ETDEWEB)

    Koponen, P [VTT Energy, Espoo (Finland)

    1998-08-01

    Electricity cannot be stored in large quantities. That is why the electricity supply and consumption are always almost equal in large power supply systems. If this balance were disturbed beyond stability, the system or a part of it would collapse until a new stable equilibrium is reached. The balance between supply and consumption is mainly maintained by controlling the power production, but also the electricity consumption or, in other words, the load is controlled. Controlling the load of the power supply system is important, if easily controllable power production capacity is limited. Temporary shortage of capacity causes high peaks in the energy price in the electricity market. Load control either reduces the electricity consumption during peak consumption and peak price or moves electricity consumption to some other time. The project Optimisation of Load Control is a part of the EDISON research program for distribution automation. The following areas were studied: Optimization of space heating and ventilation, when electricity price is time variable, load control model in power purchase optimization, optimization of direct load control sequences, interaction between load control optimization and power purchase optimization, literature on load control, optimization methods and field tests and response models of direct load control and the effects of the electricity market deregulation on load control. An overview of the main results is given in this chapter

  6. Distributed Power Flow Controller

    NARCIS (Netherlands)

    Yuan, Z.

    2010-01-01

    In modern power systems, there is a great demand to control the power flow actively. Power flow controlling devices (PFCDs) are required for such purpose, because the power flow over the lines is the nature result of the impedance of each line. Due to the control capabilities of different types of

  7. Global marketing control

    NARCIS (Netherlands)

    John Rance; Galina Zhiltsova

    2009-01-01

    The reasoning issue of this work is to research and define the efficient methods of global marketing control. The report is focused on the following aspects: the importance of the control systems in global marketing environment, the relationship between planning and controlling, types and the

  8. Plasma control device

    International Nuclear Information System (INIS)

    Takase, Haruhiko.

    1987-01-01

    Purpose: To obtain the optimum controllability for the plasmas and the thermonuclear device by selectively executing control operation for proportion, integration and differentiation (PID) by first and second controllers respectively based on selection instruction signals. Constitution: Deviation between a vertical direction equilibrium position: Zp as the plasma status amount measured in a measuring section and an aimed value Zref thereof is inputted to a first PID selection controller. The first controller selectively executes one of the PID control operations in accordance with the first selection signal instruction instructed by a PID control operation instruction circuit. Further, Zp is also inputted to a second PID selection controller, which selectively executes one of the PID control operations in accordance with the second selection instruction signal in the same manner as in the first controller. The deviation amount u between operations signals u1 and u2 from the first and second PID selection controllers is inputted to a power source to thereby supply a predetermined current value to control coils that generate equilibrium magnetic fields for making the vertical direction equilibrium position of plasmas constant. (Kamimura, M.)

  9. Control of mitochondrial respiration

    NARCIS (Netherlands)

    Tager, J. M.; Wanders, R. J.; Groen, A. K.; Kunz, W.; Bohnensack, R.; Küster, U.; Letko, G.; Böhme, G.; Duszynski, J.; Wojtczak, L.

    1983-01-01

    The control theory of Kacser and Burns [in: Rate Control of Biological Processes (Davies, D.D. ed) pp. 65-104, Cambridge University Press, London, 1973] and Heinrich and Rapoport [Eur. J. Biochem. (1974) 42, 97-105] has been used to quantify the amount of control exerted by different steps on

  10. Microbial control of pollution

    Energy Technology Data Exchange (ETDEWEB)

    Fry, J C; Gadd, G M; Herbert, R A; Jones, C W; Watson-Craik, I A [eds.

    1992-01-01

    12 papers are presented on the microbial control of pollution. Topics covered include: bioremediation of oil spills; microbial control of heavy metal pollution; pollution control using microorganisms and magnetic separation; degradation of cyanide and nitriles; nitrogen removal from water and waste; and land reclamation and restoration.

  11. Power oscillation damping controller

    DEFF Research Database (Denmark)

    2012-01-01

    A power oscillation damping controller is provided for a power generation device such as a wind turbine device. The power oscillation damping controller receives an oscillation indicating signal indicative of a power oscillation in an electricity network and provides an oscillation damping control...

  12. Optimal magnetic attitude control

    DEFF Research Database (Denmark)

    Wisniewski, Rafal; Markley, F.L.

    1999-01-01

    because control torques can only be generated perpendicular to the local geomagnetic field vector. This has been a serious obstacle for using magnetorquer based control for three-axis stabilization of a low earth orbit satellite. The problem of controlling the spacecraft attitude using only magnetic...

  13. Automobile control technology and traffic control

    Energy Technology Data Exchange (ETDEWEB)

    Takaba, Sadao [Univ. of Tokyo (Japan)

    1988-09-05

    In the field of automobile control technology, electronic was first adopted for the electronic fuel control as an answer to the exhaust gas regulations. The operations of the driving system, frame system or the automobile itself which is the combination of the two were optimized by adding sensors, computers, actuators, etc. to alleviate the burden of the driver, offering easier drivability and confortableness. For local driving control, measurement of distance up to obstacle has been practiced using the ultrasonic radar sensor. Research and development of microwave radar sensor have been carried out for years. Automatic driving has been a dream technology, and the study for the technology was started since early times. Remarkable progress was made recently in the navigation system for traffic control in wide area. New automobile traffic information communication and other systems are being developed. Historical description is made on the control and information systems for road transportation, dividing the period into the 1st, 2nd and 3rd generations. 10 references.

  14. Arbitrating Control of Control and Display Units

    Science.gov (United States)

    Sugden, Paul C.

    2007-01-01

    The ARINC 739 Switch is a computer program that arbitrates control of two multi-function control and display units (MCDUs) between (1) a commercial flight-management computer (FMC) and (2) NASA software used in research on transport aircraft. (MCDUs are the primary interfaces between pilots and FMCs on many commercial aircraft.) This program was recently redesigned into a software library that can be embedded in research application programs. As part of the redesign, this software was combined with software for creating custom pages of information to be displayed on a CDU. This software commands independent switching of the left (pilot s) and right (copilot s) MCDUs. For example, a custom CDU page can control the left CDU while the FMC controls the right CDU. The software uses menu keys to switch control of the CDU between the FMC or a custom CDU page. The software provides an interface that enables custom CDU pages to insert keystrokes into the FMC s CDU input interface. This feature allows the custom CDU pages to manipulate the FMC as if it were a pilot.

  15. Control rod drive

    International Nuclear Information System (INIS)

    Hawke, B.C.

    1986-01-01

    A reactor core, one or more control rods, and a control rod drive are described for selectively inserting and withdrawing the one or more control rods into and from the reactor core, which consists of: a support structure secured beneath the reactor core; control rod positioning means supported by the support structure for movably supporting the control rod for movement between a lower position wherein the control rod is located substantially beneath the reactor core and an upper position wherein at least an upper portion of the control rod extends into the reactor core; transmission means; primary drive means connected with the control rod positioning means by the transmission means for positioning the control rod under normal operating conditions; emergency drive means for moving the control rod from the lower position to the upper position under emergency conditions, the emergency drive means including a weight movable between an upper and a lower position, means for movably supporting the weight, and means for transmitting gravitational force exerted on the weight to the control rod positioning means to move the control rod upwardly when the weight is pulled downwardly by gravity; the transmission means connecting the control rod positioning means with the emergency drive means so that the primary drive means effects movement of the weight and the control rod in opposite directions under normal conditions, thus providing counterbalancing to reduce the force required for upward movement of the control rod under normal conditions; and restraint means for restraining the fall of the weight under normal operating conditions and disengaging the primary drive means to release the weight under emergency conditions

  16. Customs control of goods

    Directory of Open Access Journals (Sweden)

    Mentor Gashi

    2015-11-01

    Full Text Available Customs control, is regulated by law in different countries. Different countries define through the law, the control of goods.. Main purpose of this paper is to analyze two types of customs controls, and their effect in reducing avoidance of duty or tax evasion which may be caused by the import of goods of certain companies. For this reason we researched which model is implemented in developing countries and what results were reached through questionnaires. In this sense the next research question, consists in defining the moment of customs control pre or post-clearance control of goods.

  17. Internet congestion control

    CERN Document Server

    Varma, Subir

    2015-01-01

    Internet Congestion Control provides a description of some of the most important topics in the area of congestion control in computer networks, with special emphasis on the analytical modeling of congestion control algorithms. The field of congestion control has seen many notable advances in recent years and the purpose of this book, which is targeted towards the advanced and intermediate reader, is to inform about the most important developments in this area. The book should enable the reader to gain a good understanding of the application of congestion control theory to a number of applic

  18. [Controlling instruments in radiology].

    Science.gov (United States)

    Maurer, M

    2013-10-01

    Due to the rising costs and competitive pressures radiological clinics and practices are now facing, controlling instruments are gaining importance in the optimization of structures and processes of the various diagnostic examinations and interventional procedures. It will be shown how the use of selected controlling instruments can secure and improve the performance of radiological facilities. A definition of the concept of controlling will be provided. It will be shown which controlling instruments can be applied in radiological departments and practices. As an example, two of the controlling instruments, material cost analysis and benchmarking, will be illustrated.

  19. Span of control matters.

    Science.gov (United States)

    Cathcart, Deb; Jeska, Susan; Karnas, Joan; Miller, Sue E; Pechacek, Judy; Rheault, Lolita

    2004-09-01

    Prompted by manager concerns about span of control, a large, integrated health system set out to determine if span of control really mattered. Was there something to it, or was it just an excuse for poor performance? A team of middle managers studied the problem and ultimately demonstrated a strong relationship between span of control and employee engagement. Consequently, it was decided to add 4 management positions to note the effect. One year later, positive changes were observed in employee engagement scores in all 4 areas. This study suggests careful review of manager spans of control to address the untoward effects of large spans of control on employee engagement.

  20. Scheme of stepmotor control

    International Nuclear Information System (INIS)

    Grashilin, V.A.; Karyshev, Yu.Ya.

    1982-01-01

    A 6-cycle scheme of step motor is described. The block-diagram and the basic circuit of the step motor control are presented. The step motor control comprises a pulse shaper, electronic commutator and power amplifiers. The step motor supply from 6-cycle electronic commutator provides for higher reliability and accuracy than from 3-cycle commutator. The control of step motor work is realised by the program given by the external source of control signals. Time-dependent diagrams for step motor control are presented. The specifications of the step-motor is given

  1. Fault Tolerant Feedback Control

    DEFF Research Database (Denmark)

    Stoustrup, Jakob; Niemann, H.

    2001-01-01

    An architecture for fault tolerant feedback controllers based on the Youla parameterization is suggested. It is shown that the Youla parameterization will give a residual vector directly in connection with the fault diagnosis part of the fault tolerant feedback controller. It turns out...... that there is a separation be-tween the feedback controller and the fault tolerant part. The closed loop feedback properties are handled by the nominal feedback controller and the fault tolerant part is handled by the design of the Youla parameter. The design of the fault tolerant part will not affect the design...... of the nominal feedback con-troller....

  2. Control rod drives

    International Nuclear Information System (INIS)

    Futatsugi, Masao.

    1980-01-01

    Purpose: To secure the reactor operation safety by the provision of a fluid pressure detecting section for control rod driving fluid and a control rod interlock at the midway of the flow pass for supplying driving fluid to the control rod drives. Constitution: Between a driving line and a direction control valve are provided a pressure detecting portion, an alarm generating device, and a control rod inhibition interlock. The driving fluid from a driving fluid source is discharged by way of a pump and a manual valve into the reactor in which the control rods and reactor fuels are contained. In addition, when the direction control valve is switched and the control rods are inserted and extracted by the control rod drives, the pressure in the driving line is always detected by the pressure detection section, whereby if abnormal pressure is resulted, the alarm generating device is actuated to warn the abnormality and the control rod inhibition interlock is actuated to lock the direction control valve thereby secure the safety operation of the reactor. (Seki, T.)

  3. A national control system

    International Nuclear Information System (INIS)

    Larsson, A.

    1975-01-01

    An effective control of nuclear fissionable material is dependent on three different kinds of control, the industry - laboratory management, a national control system and an international safeguards system. The national systems of control differ greatly between various industrialized countries. Two principal reasons for fact can be mentioned. The type and the amounts for nuclear material may be different depending upon the stage of development of the nuclear industry in the country in question. Another reason may be that the country may wish to establish a very elaborate national system of control in order to minimize the IAEA control as much as possible. The two safeguards agreements between the Agency and Sweden on one hand and the Agency and Japan on the other hand can serve as examples for the understanding of the latitude of the IAEA safeguards system under NPT due to the influence of the national control system. If it thus is apparent that the national control system is strongly interrelated to the international safeguards system it is equally influenced by the control and accountancy systems which exist at the nuclear plants and development laboratories. A detailed study of national control systems and their relations to plant management control would fall outside the scope of this article. Some important features will however be examined. (author)

  4. Control rod drive

    International Nuclear Information System (INIS)

    Okutani, Tetsuro.

    1988-01-01

    Purpose: To provide a simple and economical control rod drive using a control circuit requiring no pulse circuit. Constitution: Control rods in a BWR type reactor are driven by hydraulic pressure and inserted or withdrawn in the direction of applying the hydraulic pressure. The direction of the hydraulic pressure is controlled by a direction control valve. Since the driving for the control rod is extremely important in view of the operation, a self diagnosis function is disposed for rapid inspection of possible abnormality. In the present invention, two driving contacts are disposed each by one between the both ends of a solenoid valve of the direction control valve for driving the control rod and the driving power source, and diagnosis is conducted by alternately operating them. Therefore, since it is only necessary that the control circuit issues a driving instruction only to one of the two driving contacts, the pulse circuit is no more required. Further, since the control rod driving is conducted upon alignment of the two driving instructions, the reliability of the control rod drive can be improved. (Horiuchi, T.)

  5. Integrated Biological Control

    International Nuclear Information System (INIS)

    JOHNSON, A.R.

    2002-01-01

    Biological control is any activity taken to prevent, limit, clean up, or remediate potential environmental, health and safety, or workplace quality impacts from plants, animals, or microorganisms. At Hanford the principal emphasis of biological control is to prevent the transport of radioactive contamination by biological vectors (plants, animals, or microorganisms), and where necessary, control and clean up resulting contamination. Other aspects of biological control at Hanford include industrial weed control (e.g.; tumbleweeds), noxious weed control (invasive, non-native plant species), and pest control (undesirable animals such as rodents and stinging insects; and microorganisms such as molds that adversely affect the quality of the workplace environment). Biological control activities may be either preventive (apriori) or in response to existing contamination spread (aposteriori). Surveillance activities, including ground, vegetation, flying insect, and other surveys, and apriori control actions, such as herbicide spraying and placing biological barriers, are important in preventing radioactive contamination spread. If surveillance discovers that biological vectors have spread radioactive contamination, aposteriori control measures, such as fixing contamination, followed by cleanup and removal of the contamination to an approved disposal location are typical response functions. In some cases remediation following the contamination cleanup and removal is necessary. Biological control activities for industrial weeds, noxious weeds and pests have similar modes of prevention and response

  6. Control from the bridge

    International Nuclear Information System (INIS)

    Kesler, S.B.

    1986-01-01

    To improve the efficiency and to cut down on cost at the uranium mine at Roessing in SWA/Namibia, the control of all the various plants in the complex has been concentrated in one centralised control system. The processing of uranium ores is also discussed. The selection of future operators of the control system was made at the start of the project. Considerable effort went into conceptualising the role and skill requirements for their job, as well as into their training. The project was concluded in 1984. The original hardware installed in the central room was configured with two basic operating stations controlling the Uranium Plant and an additional station controlling the Acid Plant. Since full implementation of the central process control system, the uranium recovery has been significantly increased whilst tighter control of process parameters has enabled reductions to be made in consumable and utilities usage

  7. Controlling chaos faster

    International Nuclear Information System (INIS)

    Bick, Christian; Kolodziejski, Christoph; Timme, Marc

    2014-01-01

    Predictive feedback control is an easy-to-implement method to stabilize unknown unstable periodic orbits in chaotic dynamical systems. Predictive feedback control is severely limited because asymptotic convergence speed decreases with stronger instabilities which in turn are typical for larger target periods, rendering it harder to effectively stabilize periodic orbits of large period. Here, we study stalled chaos control, where the application of control is stalled to make use of the chaotic, uncontrolled dynamics, and introduce an adaptation paradigm to overcome this limitation and speed up convergence. This modified control scheme is not only capable of stabilizing more periodic orbits than the original predictive feedback control but also speeds up convergence for typical chaotic maps, as illustrated in both theory and application. The proposed adaptation scheme provides a way to tune parameters online, yielding a broadly applicable, fast chaos control that converges reliably, even for periodic orbits of large period

  8. Control rod drive mechanism

    International Nuclear Information System (INIS)

    Nakamura, Akira.

    1981-01-01

    Purpose: To ensure the scram operation of a control rod by the reliable detection for the position of control rods. Constitution: A permanent magnet is provided to the lower portion of a connecting rod in engagement with a control rod and a tube having a plurality of lead switches arranged axially therein in a predetermined pitch is disposed outside of the control rod drives. When the control rod moves upwardly in the scram operation, the lead switches are closed successively upon passage of the permanent magnet to operate the electrical circuit provided by way of each of the lead switches. Thus, the position for the control rod during the scram can reliably be determined and the scram characteristic of the control rod can be recognized. (Furukawa, Y.)

  9. Reactor control device

    International Nuclear Information System (INIS)

    Araki, Takao; Inoue, Toyokazu.

    1981-01-01

    Purpose: To protect the reactor floor by alleviating the shock imparted to the reactor floor by a dropped control rod when a wire rope accidentally breaks. Constitution: A control rod is hung by wire rope from a control rod drive, and shock absorbers are mounted at the upper and lower portions of the control rod. The outer diameter of the upper shock absorber is made larger than the inner diameter of a control rod inserting hole formed in the reactor core. If the control rod drops, the upper absorber is stopped at the upper tapered portion of the inserting hole. Thus, the dropping energy of the control rod can be sufficiently absorbed by the upper and lower shock absorbers. (Kamimura, M.)

  10. Balancing Trust and Control

    DEFF Research Database (Denmark)

    Jagd, Søren

    2010-01-01

    of balancing trust and control becomes an issue that deserve ongoing attention. This paper adds to the discussion on the relation between trust and control by showing that the process perspective reframes the problem of balancing trust and control. More generally, by demonstrating the importance of the process......The purpose of this paper is to show that conceptualizing trust and control as interactively related processes, as opposed to more static conceptualizations of the two concepts and the relations between them, adds importantly towards understanding the challenges involved in balancing of trust...... on trust and control made the problem of finding a balance between trust and control a once and for all decision the process perspective introduced here implies that balancing trust and control is an ongoing process of balancing and rebalancing. The implication for management is that the problem...

  11. Controllable Elastohydrodynamics With Examples

    DEFF Research Database (Denmark)

    Santos, Ilmar; Haugaard, Martin Asger

    dynamic properties. The actively controlled bearing surface profiles can be generated by attaching any kind of actuator (hydraulic, electromagnetic or piezoelectric) to deformable bushes. In this paper the elastohydrodynamic model is used to investigate static and dynamic properties of a tilting-pad......Due to the development of high performance rotating machinery, growing attention has been paid to the design of new active (mechatronic) devices able to actively control vibrations and improve its dynamic behavior, i.e. magnetic bearings piezoelectric bearing pushers, hydraulic actuator journal...... journal bearing under hybrid elastohydrodynamics (open loop control) as well as controllable radial oil injection (closed loop control). The bearing dynamic coefficients are heavily influenced by the control parameters and pad compliance. Strong synergy between elastohydrodynamics and active control...

  12. Elements on reactor control

    International Nuclear Information System (INIS)

    Bruna, G.B.

    1998-01-01

    In order to achieve the two-fold goal of maximizing the energy obtained from reactor fuel and ensuring the large flexibility of plant operation in respect to safety regulations and keeping the reactor integrity the control of PWRs is generally based on real time monitoring and analysing of independent neutronic parameters: thermal power release, axial power distribution in the core and temperatures of the primary loop. Two control chains more or less coupled according to the control chosen mode are in charge of the control of these parameters. With the brief history of control in French power reactors the advanced X control mode adopted by Framatome for N4 plants is described in detail. A summary of N4 reactor control and protection system is included

  13. Integrated control systems

    International Nuclear Information System (INIS)

    Smith, D.J.

    1991-01-01

    This paper reports that instrument manufacturers must develop standard network interfaces to pull together interrelated systems such as automatic start-up, optimization programs, and online diagnostic systems. In the past individual control system manufacturers have developed their own data highways with proprietary hardware and software designs. In the future, electric utilities will require that future systems, irrespective of manufacturer, should be able to communicate with each other. Until now the manufactures of control systems have not agreed on the standard high-speed data highway system. Currently, the Electric Power Research Institute (EPRI), in conjunction with several electric utilities and equipment manufactures, is working on developing a standard protocol for communicating between various manufacturers' control systems. According to N. Michael of Sargent and Lundy, future control room designs will require that more of the control and display functions be accessible from the control room through CRTs. There will be less emphasis on traditional hard-wired control panels

  14. Trust and controlling

    Directory of Open Access Journals (Sweden)

    Bieńkowska Agnieszka

    2016-12-01

    Full Text Available The purpose of this study is to discuss the trust within and towards an organisation in the context of implementation of controlling therein. In this context the essence of trust and its importance in organisation management was presented, as well as trust in the contemporary management methods and concepts. Controlling as a trust-building factor inside an organisation was pointed out. Especially controlling and control were described. Moreover management by considering deviations in controlling and the teamwork in controlling were described. The role of controlling in process of trust-building to an organisation was presented. Establishing relations with the environment and systems of measurement of organisation’s achievements were presented, too.

  15. Controlling chaos faster.

    Science.gov (United States)

    Bick, Christian; Kolodziejski, Christoph; Timme, Marc

    2014-09-01

    Predictive feedback control is an easy-to-implement method to stabilize unknown unstable periodic orbits in chaotic dynamical systems. Predictive feedback control is severely limited because asymptotic convergence speed decreases with stronger instabilities which in turn are typical for larger target periods, rendering it harder to effectively stabilize periodic orbits of large period. Here, we study stalled chaos control, where the application of control is stalled to make use of the chaotic, uncontrolled dynamics, and introduce an adaptation paradigm to overcome this limitation and speed up convergence. This modified control scheme is not only capable of stabilizing more periodic orbits than the original predictive feedback control but also speeds up convergence for typical chaotic maps, as illustrated in both theory and application. The proposed adaptation scheme provides a way to tune parameters online, yielding a broadly applicable, fast chaos control that converges reliably, even for periodic orbits of large period.

  16. Advanced AC Motor Control

    Energy Technology Data Exchange (ETDEWEB)

    Kazmierkowski, M.P. [Institute of Control and Industrial Electronics, Warsaw University of Technology, Warszawa (Poland)

    1997-12-31

    In this paper a review of control methods for high performance PWM inverter-fed induction motor drives is presented. Starting from the description of an induction motor by the help of the space vectors, three basic control strategic are discussed. As first, the most popular Field Oriented Control (FOC) is described. Secondly, the Direct Torque and Flux vector Control (DTFC) method, which - in contrast to FOC - depart from idea of coordinate transformation and analogy with DC motor, is briefly characterized. The last group is based on Feedback Linearization Control (FLC) and can be easy combined with sliding mode control. The simulation and experimental oscillograms that illustrate the performance of the discussed control strategies are shown. (orig.) 35 refs.

  17. Intelligent control systems 1990

    International Nuclear Information System (INIS)

    Shoureshi, R.

    1991-01-01

    The field of artificial intelligence (Al) has generated many useful ideas and techniques that can be integrated into the design of control systems. It is believed and, for special cases, has been demonstrated, that integration of Al into control systems would provide the necessary tools for solving many of the complex problems that present control techniques and Al algorithms are unable to do, individually. However, this integration requires the development of basic understanding and new fundamentals to provide scientific bases for achievement of its potential. This book presents an overview of some of the latest research studies in the area of intelligent control systems. These papers present techniques for formulation of intelligent control, and development of the rule-based control systems. Papers present applications of control systems in nuclear power plants and HVAC systems

  18. Control of SMES

    International Nuclear Information System (INIS)

    Murakami, Y.; Sugita, M.; Kiuchi, T.; Okuda, H.

    1981-01-01

    The use of a thyristor Graetz bridge as the interface between the 3-phase ac source and the superconducting magnet (SM) has become standard in superconducting magnetic energy storage (SMES). In the future, the bridge will be DDC (direct digital control) controlled by microprocessors and the higher computations, such as the strategy for economical operation of the SMES plant will be computed by a large-scale computer resulting in a hierarchical control scheme. Some of the problems of DDC control of a SM are discussed, control schemes for effective and reactive power are compared, and the control system for the sequential control of a 0.5 MJ pulsed magnet, which is under construction, is described

  19. Controlling chaos faster

    Energy Technology Data Exchange (ETDEWEB)

    Bick, Christian [Network Dynamics, Max Planck Institute for Dynamics and Self-Organization (MPIDS), 37077 Göttingen (Germany); Bernstein Center for Computational Neuroscience (BCCN), 37077 Göttingen (Germany); Institute for Mathematics, Georg–August–Universität Göttingen, 37073 Göttingen (Germany); Kolodziejski, Christoph [Network Dynamics, Max Planck Institute for Dynamics and Self-Organization (MPIDS), 37077 Göttingen (Germany); III. Physical Institute—Biophysics, Georg–August–Universität Göttingen, 37077 Göttingen (Germany); Timme, Marc [Network Dynamics, Max Planck Institute for Dynamics and Self-Organization (MPIDS), 37077 Göttingen (Germany); Institute for Nonlinear Dynamics, Georg–August–Universität Göttingen, 37077 Göttingen (Germany)

    2014-09-01

    Predictive feedback control is an easy-to-implement method to stabilize unknown unstable periodic orbits in chaotic dynamical systems. Predictive feedback control is severely limited because asymptotic convergence speed decreases with stronger instabilities which in turn are typical for larger target periods, rendering it harder to effectively stabilize periodic orbits of large period. Here, we study stalled chaos control, where the application of control is stalled to make use of the chaotic, uncontrolled dynamics, and introduce an adaptation paradigm to overcome this limitation and speed up convergence. This modified control scheme is not only capable of stabilizing more periodic orbits than the original predictive feedback control but also speeds up convergence for typical chaotic maps, as illustrated in both theory and application. The proposed adaptation scheme provides a way to tune parameters online, yielding a broadly applicable, fast chaos control that converges reliably, even for periodic orbits of large period.

  20. The Parrot UAV Controlled by PID Controllers

    OpenAIRE

    Koszewnik Andrzej

    2014-01-01

    The paper presents the process of modeling and designing control laws for four-rotor type of the Parrot UAV. The state space model is obtained by using several phenomena like gyroscopic effects for rigid bodies, propellers and rotors. The obtained model has been used to design PID control laws for roll, pitch, yaw angle and altitude, respectively. The numerical simulations of the closed loop model are shown that system in satisfy way stabilize flight of the quadro-rotor in all considered dire...

  1. The Parrot UAV Controlled by PID Controllers

    Directory of Open Access Journals (Sweden)

    Koszewnik Andrzej

    2014-08-01

    Full Text Available The paper presents the process of modeling and designing control laws for four-rotor type of the Parrot UAV. The state space model is obtained by using several phenomena like gyroscopic effects for rigid bodies, propellers and rotors. The obtained model has been used to design PID control laws for roll, pitch, yaw angle and altitude, respectively. The numerical simulations of the closed loop model are shown that system in satisfy way stabilize flight of the quadro-rotor in all considered directions.

  2. Position control device for a control rod

    International Nuclear Information System (INIS)

    Ono, Takehiko; Kusaka, Shuji.

    1976-01-01

    Purpose: To reliably prevent dangerous operation in the control of the position of the control rod by checking for abnormal pulse motor coil excitation voltage and, at the time of occurrence of abnormality, immediately holding the control rod stationary lest it should be moved to an unsafe position, this being accomplished excitation from a compensating excitation system. Constitution: In an FBR reactor, a circuit for memorizing the correct output states of individual drive signals at arbitrary instants and consequtively producing the memorized results is provided, and the output of the circuit and the actual drive signal are compared at all times to discriminate whether the drive signal being compared is normal or not. When the actual drive signal is abnormal, a series signal varying after a predetermined pattern is shifted to enable replacement of the actual drive signal, so that irrespective of whether the problem drive signal is ''on'' or ''off'', a drive signal of the correct pattern may be supplied to the pulse motor to hold the control rod and prevent it from being moved toward the dangerous side due to its own weight or other causes. (Horiuchi, T.)

  3. Generic device controller for accelerator control systems

    International Nuclear Information System (INIS)

    Mariotti, R.; Buxton, W.; Frankel, R.; Hoff, L.

    1987-01-01

    Distributed intelligence for accelerator control systems has become possible as a result of advances in microprocessor technology. A system based on distributed intelligence is inherently versatile, readily expandable, and reduces both information flow across the system and software complexity in each unit

  4. Price control and macromarketing

    Directory of Open Access Journals (Sweden)

    Kancir Rade

    2003-01-01

    Full Text Available Price control at macro level is part of integral macro marketing strategic control system, or more precisely, part of social marketing mix control. Price impact is direct, if it is regarded in the context of needs satisfaction, and indirect, within the context of resource allocation. These two patterns of price impact define control mechanism structuring. Price control in sense of its direct impact at process of need satisfaction should comprise qualitative and quantitative level of needs satisfaction at a given price level and its structure, informational dimension of price and different disputable forms of corporate pricing policies. Control of price allocation function is based at objectives of macro marketing system management in the area of resource allocation and the role of price as allocator in contemporary market economies. Control process is founded, on one hand, at theoretical models of correlation between price and demand in different market structures, and on the other hand, at complex limits that price as allocator has, and which make whole control process even more complex because of reduction of the degree of determinism in functioning of contemporary economic systems. Control of price allocation function must be continuous and dynamic process if it is to provide for convergence with environmental changes and if it is to provide for placing control systems at micro marketing levels in the function of socially valid objectives.

  5. Tango for experiment control

    International Nuclear Information System (INIS)

    Meyer, J.; Claustre, L.; Petitdemange, S.; Svensson, O.; Götz, A.; Coutinho, T.; Klora, J.; Picca, F.; Ounsy, M.; Buteau, A.

    2012-01-01

    The Tango control system framework allows you to control an accelerator complex as well as single equipment. The framework contains the communication bus with the standard communication modes (synchronous, asynchronous, event driven) as well as the basic hardware access modules, GUI tools and development kits, bindings to commercial products (LabView, Matlab, IgorPro) and services (administration, archiving, access control) to set up a control system. Tango was mainly developed by several synchrotron light sources that have to support not only the accelerator complex but also a lot of experimental end stations. For synchrotron experiments we have to control the whole process from basic hardware access over data taking to data analysis. This paper describes in the first part the special features of Tango allowing flexible experiment control. The dynamic configuration, the rapid hardware interface development and the sequencing and scanning framework are some examples. The second part gives an overview of some packages developed in the Tango community for experiment control: A HKL library for diffraction computation and diffractometer control, a library to control 2D detectors and a data analysis workbench with workflow engine for on-line and off-line data analysis. These packages are not part of Tango and can be used with other control systems. (author)

  6. Fission reactor control rod

    International Nuclear Information System (INIS)

    Irie, Tomoo.

    1991-01-01

    The present invention concerns a control rod in a PWR type reactor. A control rod has an inner cladding tube and an outer cladding tube disposed coaxially, and a water draining hole is formed at the inside of the inner cladding tube. Neutron absorbers are filled in an annular gap between the outer cladding tube and the inner cladding tube. The water draining hole opens at the lower end thereof to the top end of the control rod and at the upper end thereof to the side of the upper end plug of the control rod. If the control rod is dropped to a control rod guide thimble for reactor scram, coolants from the control rod guide thimble are flown from the lower end of the water draining hole and discharged from the upper end passing through the water draining hole. In this way, water from the control rod guide thimble is removed easily when the control rod is dropped. Further, the discharging amount of water itself is reduced by the provision of the water draining hole. Accordingly, sufficient control rod dropping speed can be attained. (I.N.)

  7. Integration of Fire Control, Flight Control and Propulsion Control Systems.

    Science.gov (United States)

    1983-08-01

    pourront etre enploy6s. Avant l’attaque, des profils de vole contr~lant I’Anergie seront 6tablis pour augmenter au maximum l’dnergie disponible do...VERIIATION PROCEDURES NTRTO PERFORM CONTROL SYSTEM REPEAT TESTS WITH ACTUAL ENGIRE ITEATO INTEGRATION TO TIENMO. RUUINED TE VALIDATE TESTING TESI ...fonrtionnement est disponible . Teat-dea rodur d’nrf /sortie .an. scs i lquiesent posslde ce* deux dispositife, on test des rodeurs et sx~fiutA *Sur une vote do

  8. Artificial locomotion control

    DEFF Research Database (Denmark)

    Azevedo, Christine; Poignet, Philippe; Espiau, Bernard

    2004-01-01

    of postural and walking control; use of evolutive optimization objectives; on-line event handling and environment adaptation and anticipation. This leads to the synthesis of an original control scheme based on non-linear model predictive control: Trajectory Free NMPC. The movement is specified implicitly......This paper concerns the simultaneous synthesis and control of walking gaits for biped robots. The goal is to propose an adaptable and reactive control law for two-legged machines. The problem is addressed with human locomotion as a reference. The starting point of our work is an analysis of human...... walking from descriptive (biomechanics) as well as explicative (neuroscience and physiology) points of view, the objective being to stress the relevant elements for the approach of robot control. The adopted principles are then: no joint trajectory tracking; explicit distinction and integration...

  9. Control of training instrument

    International Nuclear Information System (INIS)

    Seo, K. W.; Joo, Y. C.; Park, J. C.; Hong, C. S.; Choi, I. K.; Cho, B. J.; Lee, H. Y.; Seo, I. S.; Park, N. K.

    1996-01-01

    This report describes the annual results on control of training instrument. The scope and contents are the following: 1. Control of Compact Nuclear Simulator 2. Control of Radiation/Radioactivity Measurement 3. Control of Non-Destructive Testing Equipment 4. Control of Chemical Equipment 5. Control of Personal Computer 6. Other related Lecture Aid Equipment. Efforts were employed to upgrade the training environment through retrofitting experimental facilities, compiling teaching materials and reforcing audio-visual aids. The Nuclear Training Center executed the open-door training courses for 2,496 engineers/scientists from the nuclear regulatory, nuclear industries, research institutes and other related organizations by means of offering 45 training courses during the fiscal year 1995. (author). 15 tabs., 7 figs., 13 refs

  10. Quality Control Applications

    CERN Document Server

    Chorafas, Dimitris N

    2013-01-01

    Quality control is a constant priority in electrical, mechanical, aeronautical, and nuclear engineering – as well as in the vast domain of electronics, from home appliances to computers and telecommunications. Quality Control Applications provides guidance and valuable insight into quality control policies; their methods, their implementation, constant observation and associated technical audits. What has previously been a mostly mathematical topic is translated here for engineers concerned with the practical implementation of quality control. Once the fundamentals of quality control are established, Quality Control Applications goes on to develop this knowledge and explain how to apply it in the most effective way. Techniques are described and supported using relevant, real-life, case studies to provide detail and clarity for those without a mathematical background. Among the many practical examples, two case studies dramatize the importance of quality assurance: A shot-by-shot analysis of the errors made ...

  11. Tautological control systems

    CERN Document Server

    Lewis, Andrew D

    2014-01-01

    This brief presents a description of a new modelling framework for nonlinear/geometric control theory. The framework is intended to be—and shown to be—feedback-invariant. As such, Tautological Control Systems provides a platform for understanding fundamental structural problems in geometric control theory. Part of the novelty of the text stems from the variety of regularity classes, e.g., Lipschitz, finitely differentiable, smooth, real analytic, with which it deals in a comprehensive and unified manner. The treatment of the important real analytic class especially reflects recent work on real analytic topologies by the author. Applied mathematicians interested in nonlinear and geometric control theory will find this brief of interest as a starting point for work in which feedback invariance is important. Graduate students working in control theory may also find Tautological Control Systems to be a stimulating starting point for their research.

  12. Applied Control Systems Design

    CERN Document Server

    Mahmoud, Magdi S

    2012-01-01

    Applied Control System Design examines several methods for building up systems models based on real experimental data from typical industrial processes and incorporating system identification techniques. The text takes a comparative approach to the models derived in this way judging their suitability for use in different systems and under different operational circumstances. A broad spectrum of control methods including various forms of filtering, feedback and feedforward control is applied to the models and the guidelines derived from the closed-loop responses are then composed into a concrete self-tested recipe to serve as a check-list for industrial engineers or control designers. System identification and control design are given equal weight in model derivation and testing to reflect their equality of importance in the proper design and optimization of high-performance control systems. Readers’ assimilation of the material discussed is assisted by the provision of problems and examples. Most of these e...

  13. Control Multivariable por Desacoplo

    Directory of Open Access Journals (Sweden)

    Fernando Morilla

    2013-01-01

    Full Text Available Resumen: La interacción entre variables es una característica inherente de los procesos multivariables, que dificulta su operación y el diseño de sus sistemas de control. Bajo el paradigma de Control por desacoplo se agrupan un conjunto de metodologías, que tradicionalmente han estado orientadas a eliminar o reducir la interacción, y que recientemente algunos investigadores han reorientado con objetivos de solucionar un problema tan complejo como es el control multivariable. Parte del material descrito en este artículo es bien conocido en el campo del control de procesos, pero la mayor parte de él son resultados de varios años de investigación de los autores en los que han primado la generalización del problema, la búsqueda de soluciones de fácil implementación y la combinación de bloques elementales de control PID. Esta conjunción de intereses provoca que no siempre se pueda conseguir un desacoplo perfecto, pero que sí se pueda conseguir una considerable reducción de la interacción en el nivel básico de la pirámide de control, en beneficio de otros sistemas de control que ocupan niveles jerárquicos superiores. El artículo resume todos los aspectos básicos del Control por desacoplo y su aplicación a dos procesos representativos: una planta experimental de cuatro tanques acoplados y un modelo 4×4 de un sistema experimental de calefacción, ventilación y aire acondicionado. Abstract: The interaction between variables is inherent in multivariable processes and this fact may complicate their operation and control system design. Under the paradigm of decoupling control, several methodologies that traditionally have been addressed to cancel or reduce the interactions are gathered. Recently, this approach has been reoriented by several researchers with the aim to solve such a complex problem as the multivariable control. Parts of the material in this work are well known in the process control field; however, most of them are

  14. Reset Control Systems

    CERN Document Server

    Baños, Alfonso

    2012-01-01

    Reset Control Systems addresses the analysis for reset control treating both its basic form which requires only that the state of the controller be reinitialized to zero (the reset action) each time the tracking error crosses zero (the reset condition), and some useful variations of the reset action (partial reset with fixed or variable reset percentage) and of the reset condition (fixed or variable reset band and anticipative reset). The issues regarding reset control – concepts and motivation; analysis tools; and the application of design methodologies to real-world examples – are given comprehensive coverage. The text opens with an historical perspective which moves from the seminal work of the Clegg integrator and Horowitz FORE to more recent approaches based on impulsive/hybrid control systems and explains the motivation for reset compensation. Preliminary material dealing with notation, basic definitions and results, and with the definition of the control problem under study is also included. The fo...

  15. Flight control actuation system

    Science.gov (United States)

    Wingett, Paul T. (Inventor); Gaines, Louie T. (Inventor); Evans, Paul S. (Inventor); Kern, James I. (Inventor)

    2006-01-01

    A flight control actuation system comprises a controller, electromechanical actuator and a pneumatic actuator. During normal operation, only the electromechanical actuator is needed to operate a flight control surface. When the electromechanical actuator load level exceeds 40 amps positive, the controller activates the pneumatic actuator to offset electromechanical actuator loads to assist the manipulation of flight control surfaces. The assistance from the pneumatic load assist actuator enables the use of an electromechanical actuator that is smaller in size and mass, requires less power, needs less cooling processes, achieves high output forces and adapts to electrical current variations. The flight control actuation system is adapted for aircraft, spacecraft, missiles, and other flight vehicles, especially flight vehicles that are large in size and travel at high velocities.

  16. Spacecraft momentum control systems

    CERN Document Server

    Leve, Frederick A; Peck, Mason A

    2015-01-01

    The goal of this book is to serve both as a practical technical reference and a resource for gaining a fuller understanding of the state of the art of spacecraft momentum control systems, specifically looking at control moment gyroscopes (CMGs). As a result, the subject matter includes theory, technology, and systems engineering. The authors combine material on system-level architecture of spacecraft that feature momentum-control systems with material about the momentum-control hardware and software. This also encompasses material on the theoretical and algorithmic approaches to the control of space vehicles with CMGs. In essence, CMGs are the attitude-control actuators that make contemporary highly agile spacecraft possible. The rise of commercial Earth imaging, the advances in privately built spacecraft (including small satellites), and the growing popularity of the subject matter in academic circles over the past decade argues that now is the time for an in-depth treatment of the topic. CMGs are augmented ...

  17. Intelligent power supply controller

    International Nuclear Information System (INIS)

    Rumrill, R.S.; Reinagel, D.J.

    1991-01-01

    The authors have developed a new power supply controller which would combine 20-bit precision, simple interfacing, and versatile software control. It performs many tasks internal to the power supply and also communicates with an external host computer. Parameters can be entered and/or read over a serial link using one of the 82 command words. In addition, an optional remote control panel can be located up to thousands of feet away. This new controller will reduce the software development time normally spent by the user, while increasing the reliability of the system. The cost is less than buying the equivalent separate CAMAC system. Nonvolatile memory remembers all configuration data; one generic controller can thus be programmed to use anywhere from the smallest power supply to the largest. The controllers will be used at the Clinton P. Anderson Meson Facility at Los Alamos

  18. Control of Electric Vehicle

    OpenAIRE

    Huang, Qi; Chen, Yong; Li, Jian

    2010-01-01

    In this chapter, the modeling of electric vehicle is discussed in detail. Then, the control of electric vehicle driven by different motors is discussed. Both brushed and brushless DC (Direct Current) motors are discussed. And for AC (Alternative Current) motors, the discussion is focused on induction motor and permanent magnet synchronous motor. The design of controllers for different motor-driven electric vehicle is discussed in-depth, and the tested high-performance control strategies for d...

  19. The energy control

    International Nuclear Information System (INIS)

    2002-01-01

    Because of strong constraints, the energy control has not been a priority of the public choices. With the market liberalization, the framework of the energy control is modified. But the new program became not sufficient. This study aims to present the necessary new policy of the energy control, which must be integrated in the attitudes and must imply the local government. (A.L.B.)

  20. Control component retainer

    International Nuclear Information System (INIS)

    Walton, L.A.; King, R.A.

    1983-01-01

    An apparatus is described for retaining an undriven control component assembly disposed in a fuel assembly in a nuclear reactor of the type having a core grid plate. The first part of the mechanism involves a housing for the control component and the second part is a brace with a number of arms that reach under the grid plate. The brace and the housing are coupled together to firmly hold the control components in place even under strong flows of th coolant

  1. Temperature measurement and control

    CERN Document Server

    Leigh, JR

    1988-01-01

    This book treats the theory and practice of temperature measurement and control and important related topics such as energy management and air pollution. There are no specific prerequisites for the book although a knowledge of elementary control theory could be useful. The first half of the book is an application oriented survey of temperature measurement techniques and devices. The second half is concerned mainly with temperature control in both simple and complex situations.

  2. SDN controllers security issues

    OpenAIRE

    Imran, Ayesha

    2017-01-01

    Software-Defined Networking (SDN) is essentially varying the way we design and manage networks, which makes a communication network programmable. In SDN, a logically centralized controller has straight control over the packet-handling functions of the network switches, using a standard, open API (Application Programming Interface) such as OpenFlow. OpenFlow is a broadly used protocol for software-defined networks (SDNs) that presents a new model in which the control plane is inattentive from ...

  3. ISTTOK control system upgrade

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, Ivo S., E-mail: ivoc@ipfn.ist.utl.pt; Duarte, Paulo; Fernandes, Horácio; Valcárcel, Daniel F.; Carvalho, Pedro J.; Silva, Carlos; Duarte, André S.; Neto, André; Sousa, Jorge; Batista, António J.N.; Carvalho, Bernardo B.

    2013-10-15

    Highlights: •ISTTOK fast controller. •All real-time diagnostic and actuators were integrated in the control platform. •100 μs control cycle under the MARTe framework. •The ISTTOK control system upgrade provides reliable operation with an improved operational space. -- Abstract: The ISTTOK tokamak (Ip = 4 kA, BT = 0.5 T, R = 0.46 m, a = 0.085 m) is one of the few tokamaks with regular alternate plasma current (AC) discharges scientific programme. In order to improve the discharge stability and to increase the number of AC discharge cycles a novel control system was developed. The controller acquires data from 50 analog-to-digital converter (ADC) channels of real-time diagnostics and measurements: tomography, Mirnov coils, interferometer, electric probes, sine and cosine probes, bolometer, current delivered by the power supplies, loop voltage and plasma current. The system has a control cycle of 100 μs during which it reads all the diagnostics connected to the advanced telecommunications computing architecture (ATCA) digitizers and sends the control reference to ISTTOK actuators. The controller algorithms are executed on an Intel{sup ®} Q8200 chip with 4 cores running at 2.33 GHz and connected to the I/O interfaces through an ATCA based environment. The real-time control system was programmed in C++ on top of the Multi-threaded Application Real-Time executor (MARTe). To extend the duration of the AC discharges and the plasma stability a new magnetising field power supply was commissioned and the horizontal and vertical field power supplies were also upgraded. The new system also features a user-friendly interface based on HyperText Markup Language (HTML) and Javascript to configure the controller parameters. This paper presents the ISTTOK control system and the consequent update of real-time diagnostics and actuators.

  4. ISTTOK control system upgrade

    International Nuclear Information System (INIS)

    Carvalho, Ivo S.; Duarte, Paulo; Fernandes, Horácio; Valcárcel, Daniel F.; Carvalho, Pedro J.; Silva, Carlos; Duarte, André S.; Neto, André; Sousa, Jorge; Batista, António J.N.; Carvalho, Bernardo B.

    2013-01-01

    Highlights: •ISTTOK fast controller. •All real-time diagnostic and actuators were integrated in the control platform. •100 μs control cycle under the MARTe framework. •The ISTTOK control system upgrade provides reliable operation with an improved operational space. -- Abstract: The ISTTOK tokamak (Ip = 4 kA, BT = 0.5 T, R = 0.46 m, a = 0.085 m) is one of the few tokamaks with regular alternate plasma current (AC) discharges scientific programme. In order to improve the discharge stability and to increase the number of AC discharge cycles a novel control system was developed. The controller acquires data from 50 analog-to-digital converter (ADC) channels of real-time diagnostics and measurements: tomography, Mirnov coils, interferometer, electric probes, sine and cosine probes, bolometer, current delivered by the power supplies, loop voltage and plasma current. The system has a control cycle of 100 μs during which it reads all the diagnostics connected to the advanced telecommunications computing architecture (ATCA) digitizers and sends the control reference to ISTTOK actuators. The controller algorithms are executed on an Intel ® Q8200 chip with 4 cores running at 2.33 GHz and connected to the I/O interfaces through an ATCA based environment. The real-time control system was programmed in C++ on top of the Multi-threaded Application Real-Time executor (MARTe). To extend the duration of the AC discharges and the plasma stability a new magnetising field power supply was commissioned and the horizontal and vertical field power supplies were also upgraded. The new system also features a user-friendly interface based on HyperText Markup Language (HTML) and Javascript to configure the controller parameters. This paper presents the ISTTOK control system and the consequent update of real-time diagnostics and actuators

  5. Controllability of nilpotent systems

    International Nuclear Information System (INIS)

    Bravo, V.A.; Martin, L.S.

    1993-02-01

    The purpose of this paper is to investigate algebraic conditions which give information about the controllability of invariant control systems on nilpotent Lie groups. With the same purpose, the authors use the co-adjoint representation and define the concept of symplectic vectors. We study the existence of these objects to analyze the controllability. In particular, we obtain a characterization when G is simply connected. (author). 9 refs

  6. Mathematical control theory

    International Nuclear Information System (INIS)

    Agrachev, A.A.

    2002-01-01

    This volume is based on the lecture notes of the minicourses given in the frame of the school on Mathematical Control Theory held at the Abdus Salam ICTP from 3 to 28 September 2001. Mathematical Control Theory is a rapidly growing field which provides strict theoretical and computational tools for dealing with problems arising in electrical and aerospace engineering, automatics, robotics, applied chemistry, and biology etc. Control methods are also involved in questions pertaining to the development of countries in the South, such as wastewater treatment, agronomy, epidemiology, population dynamics, control of industrial and natural bio-reactors. Since most of these natural processes are highly nonlinear, the tools of nonlinear control are essential for the modelling and control of such processes. At present regular courses in Mathematical Control Theory are rarely included in the curricula of universities, and very few researchers receive enough background in the field. Therefore it is important to organize specific activities in the form of schools to provide the necessary background for those embarking on research in this field. The school at the Abdus Salam ICTP consisted of several minicourses intended to provide an introduction to various topics of Mathematical Control Theory, including Linear Control Theory (finite and infinite-dimensional), Nonlinear Control, and Optimal Control. The last week of the school was concentrated on applications of Mathematical Control Theory, in particular, those which are important for the development of non-industrialized countries. The school was intended primarily for mathematicians and mathematically oriented engineers at the beginning of their career. The typical participant was expected to be a graduate student or young post-doctoral researcher interested in Mathematical Control Theory. It was assumed that participants have sufficient background in Ordinary Differential Equations and Advanced Calculus. The volume

  7. The arms race control

    International Nuclear Information System (INIS)

    Nemo, J.

    2010-01-01

    Written in 1961, this paper presents the content of a book entitled 'The arms race control' where the author outlined the difference between disarmament and arms control, described the economic and moral role of arms race, the importance of force balance for international security. He wandered whether arms control could ensure this balance and whether nuclear balance meant force balance. Force balance then appears to be a precarious and unsteady component of international security. He commented the challenges of disarmament, recalled some arguments for a nuclear disarmament. Then he discussed what would be an arms control with or without disarmament (either nuclear or conventional)

  8. An integrated gyrotron controller

    Energy Technology Data Exchange (ETDEWEB)

    Michel, Georg, E-mail: michel@ipp.mpg.de; Sachtleben, Juergen

    2011-10-15

    The ECRH system of W7-X is composed of 10 independent gyrotron modules. Each module consists of one gyrotron and its peripherals such as power supplies, cooling plants and distributed PLC systems. The fast real-time control functions such as the timing of the two high voltage supplies, trigger pulses, protection, modulation and communication with the central control of W7-X, is implemented in an integrated controller which is described in this paper. As long-term maintainability and sustainability are important for nuclear fusion experiments, the choice fell on an FPGA-based design which is exclusively based on free (as in 'freedom') software and configuration code. The core of the controller consists of a real-time Java virtual machine (JVM) that provides the TCP-IP connectivity as well as more complicated control functions, and which interacts with the gyrotron-specific hardware. Both the gyrotron-specific hardware and the JVM are implemented on the same FPGA, which is the main component of the controller. All 10 controllers are currently completed and operational. All parameters and functions are accessible via Ethernet. Due to the open, FPGA-based design, most hardware modifications can be made via the network as well. This paper discusses the capabilities of the controllers and their integration into the central W7-X control.

  9. Control systems engineering

    CERN Document Server

    Nise, Norman S

    1995-01-01

    This completely updated new edition shows how to use MATLAB to perform control-system calculations. Designed for the professional or engineering student who needs a quick and readable update on designing control systems, the text features a series of tightly focused examples that clearly illustrate each concept of designing control systems. Most chapters conclude with a detailed application from the two case studies that run throughout the book: an antenna asimuth control system and a submarine. The author also refers to many examples of design methods.

  10. Control in Complex Organizations

    DEFF Research Database (Denmark)

    Rennstam, Jens; Kärreman, Dan

    The extant research on organizational control builds on the assumption of vertical control – managers are thought to develop orders, rules and norms to control the operating core. Yet it is claimed that work becomes increasingly “knowledge intensive” and that organizations rely heavily for their ......The extant research on organizational control builds on the assumption of vertical control – managers are thought to develop orders, rules and norms to control the operating core. Yet it is claimed that work becomes increasingly “knowledge intensive” and that organizations rely heavily...... for their productivity on the knowledge and creativity of their work force. In this type of “knowledge work,” the strong focus on vertical control is insufficient as it fails to account for the important operative and horizontal interactions upon which many contemporary organizations depend. Drawing on practice theory...... and an ethnographic study of engineering work, this paper theorizes control as a form of work that does not only belong to formal management, but is dispersed among various work activities, including horizontal ones. The article introduces the idea of control work as a key practice in contemporary organizations...

  11. Mathematical control theory

    Energy Technology Data Exchange (ETDEWEB)

    Agrachev, A A [Steklov Mathematical Institute, Moscow (Russian Federation); SISSA, Trieste [Italy; ed.

    2002-07-15

    This volume is based on the lecture notes of the minicourses given in the frame of the school on Mathematical Control Theory held at the Abdus Salam ICTP from 3 to 28 September 2001. Mathematical Control Theory is a rapidly growing field which provides strict theoretical and computational tools for dealing with problems arising in electrical and aerospace engineering, automatics, tics, applied chemistry, and biology etc. Control methods are also involved in questions pertaining to the development of countries in the South, such as wastewater treatment, agronomy, epidemiology, population dynamics, control of industrial and natural bio-reactors. Since most of these natural processes are highly nonlinear, the tools of nonlinear control are essential for the modelling and control of such processes. At present regular courses in Mathematical Control Theory are rarely included in the curricula of universities, and very few researchers receive enough background in the field. Therefore it is important to organize specific activities in the form of schools to provide the necessary background for those embarking on research in this field. The school at the Abdus Salam ICTP consisted of several minicourses intended to provide an introduction to various topics of Mathematical Control Theory, including Linear Control Theory (finite and infinite-dimensional), Nonlinear Control, and Optimal Control. The last week of the school was concentrated on applications of Mathematical Control Theory, in particular, those which are important for the development of non-industrialized countries. The school was intended primarily for mathematicians and mathematically oriented engineers at the beginning of their career. The typical participant was expected to be a graduate student or young post-doctoral researcher interested in Mathematical Control Theory. It was assumed that participants have sufficient background in Ordinary Differential Equations and Advanced Calculus. The volume contains

  12. Intelligent networked teleoperation control

    CERN Document Server

    Li, Zhijun; Su, Chun-Yi

    2015-01-01

    This book describes a unified framework for networked teleoperation systems involving multiple research fields: networked control systems for linear and nonlinear forms, bilateral teleoperation, trilateral teleoperation, multilateral teleoperation and cooperative teleoperation. It closely examines networked control as a field at the intersection of systems & control and robotics and presents a number of experimental case studies on testbeds for robotic systems, including networked haptic devices, robotic network systems and sensor network systems. The concepts and results outlined are easy to understand, even for readers fairly new to the subject. As such, the book offers a valuable reference work for researchers and engineers in the fields of systems & control and robotics.

  13. Controlling radioactive waste

    International Nuclear Information System (INIS)

    Wurtinger, W.

    1992-01-01

    The guideline of the Ministry for Environmental Protection for controlling radioactive waste with a negligible development of heat defines in detail what data are relevant to the control of radioactive waste and should be followed up on and included in a system of documentation. By introducing the AVK (product control system for tracing the course of waste disposal) the operators of German nuclear power plants have taken the requirements of this guideline into account. In particular, possibilities for determining the degree of radioactivity of radioactive waste, which the BMU-guidelines call for, were put into practice by means of the programming technology of the product control system's module MOPRO. (orig.) [de

  14. Control system design guide

    Energy Technology Data Exchange (ETDEWEB)

    Sellers, David; Friedman, Hannah; Haasl, Tudi; Bourassa, Norman; Piette, Mary Ann

    2003-05-01

    The ''Control System Design Guide'' (Design Guide) provides methods and recommendations for the control system design process and control point selection and installation. Control systems are often the most problematic system in a building. A good design process that takes into account maintenance, operation, and commissioning can lead to a smoothly operating and efficient building. To this end, the Design Guide provides a toolbox of templates for improving control system design and specification. HVAC designers are the primary audience for the Design Guide. The control design process it presents will help produce well-designed control systems that achieve efficient and robust operation. The spreadsheet examples for control valve schedules, damper schedules, and points lists can streamline the use of the control system design concepts set forth in the Design Guide by providing convenient starting points from which designers can build. Although each reader brings their own unique questions to the text, the Design Guide contains information that designers, commissioning providers, operators, and owners will find useful.

  15. Mechatronics control technology

    International Nuclear Information System (INIS)

    1988-03-01

    This book consists six chapters, which are an assembler grammar and practical use on Z801 8041/8048 and kind of assemblers and how to use, control of a microprocessor and mechatro with application of 8255, interface circuit and direction of DA converter, control of stepping motor such as introduction of it, sequence switch, drive program of stepping motor, control for DC motor such as normal rotation and abnormal rotation operation of DC motor by personal computer, control AC motor like PWM inverter and data communication among systems such as RS-232C and INTEL-HEXA format program.

  16. Strain actuated aeroelastic control

    Science.gov (United States)

    Lazarus, Kenneth B.

    1992-01-01

    Viewgraphs on strain actuated aeroelastic control are presented. Topics covered include: structural and aerodynamic modeling; control law design methodology; system block diagram; adaptive wing test article; bench-top experiments; bench-top disturbance rejection: open and closed loop response; bench-top disturbance rejection: state cost versus control cost; wind tunnel experiments; wind tunnel gust alleviation: open and closed loop response at 60 mph; wind tunnel gust alleviation: state cost versus control cost at 60 mph; wind tunnel command following: open and closed loop error at 60 mph; wind tunnel flutter suppression: open loop flutter speed; and wind tunnel flutter suppression: closed loop state cost curves.

  17. Reactor power control device

    International Nuclear Information System (INIS)

    Imaruoka, Hiromitsu.

    1994-01-01

    A high pressure water injection recycling system comprising injection pipelines of a high pressure water injection system and a flow rate control means in communication with a pool of a pressure control chamber is disposed to a feedwater system of a BWR type reactor. In addition, the flow rate control means is controlled by a power control device comprising a scram impossible transient event judging section, a required injection flow rate calculation section for high pressure water injection system and a control signal calculation section. Feed water flow rate to be supplied to the reactor is controlled upon occurrence of a scram impossible transient event of the reactor. The scram impossible transient event is judged based on reactor output signals and scram operation demand signals and injection flow rate is calculated based on a predetermined reactor water level, and condensate storage tank water or pressure control chamber pool water is injected to the reactor. With such procedures, water level can be ensured and power can be suppressed. Further, condensate storage tank water of low enthalpy is introduced to the pressure suppression chamber pool to directly control elevation of water temperature and ensure integrity of the pressure vessel and the reactor container. (N.H.)

  18. Control functions in MFM

    DEFF Research Database (Denmark)

    Lind, Morten

    2011-01-01

    Multilevel Flow Modeling (MFM) has been proposed as a tool for representing goals and functions of complex industrial plants and suggested as a basis for reasoning about control situations. Lind presents an introduction to MFM but do not describe how control functions are used in the modeling....... The purpose of the present paper is to serve as a companion paper to this introduction by explaining the basic principles used in MFM for representation of control functions. A theoretical foundation for modeling control functions is presented and modeling examples are given for illustration....

  19. Control of dynamical localization

    International Nuclear Information System (INIS)

    Gong Jiangbin; Woerner, Hans Jakob; Brumer, Paul

    2003-01-01

    Control over the quantum dynamics of chaotic kicked rotor systems is demonstrated. Specifically, control over a number of quantum coherent phenomena is achieved by a simple modification of the kicking field. These include the enhancement of the dynamical localization length, the introduction of classical anomalous diffusion assisted control for systems far from the semiclassical regime, and the observation of a variety of strongly nonexponential line shapes for dynamical localization. The results provide excellent examples of controlled quantum dynamics in a system that is classically chaotic and offer opportunities to explore quantum fluctuations and correlations in quantum chaos

  20. Fuzzy control and identification

    CERN Document Server

    Lilly, John H

    2010-01-01

    This book gives an introduction to basic fuzzy logic and Mamdani and Takagi-Sugeno fuzzy systems. The text shows how these can be used to control complex nonlinear engineering systems, while also also suggesting several approaches to modeling of complex engineering systems with unknown models. Finally, fuzzy modeling and control methods are combined in the book, to create adaptive fuzzy controllers, ending with an example of an obstacle-avoidance controller for an autonomous vehicle using modus ponendo tollens logic.

  1. Control of air toxics

    International Nuclear Information System (INIS)

    Livengood, C.D.

    1995-01-01

    For more than 10 years, Argonne National Laboratory has supported the US DOE's Flue Gas Cleanup Program objective by developing new or improved environmental controls for industries that use fossil fuels. Argonne's pollutant emissions research has ranged from experiments in the basic chemistry of pollution-control systems, through laboratory-scale process development and testing, to pilot-scale field tests of several technologies. The work on air toxics is currently divided into two components: Investigating measures to improve the removal of mercury in existing pollution-control systems applied to coal combustion; and, Developing sensors and control techniques for emissions found in the textile industry

  2. MOSFET Power Controller

    Science.gov (United States)

    Mitchell, J.; Jones, K.

    1986-01-01

    High current and voltage controlled remotely. Remote Power Conroller includes two series-connected banks of parallel-connected MOSFET's to withstand high current and voltage. Voltage sharing between switch banks, low-impedance, gate-drive circuits used. Provided controlled range for turn on. Individually trimmable to insure simultaneous switching within few nanoseconds during both turn on and turn off. Control circuit for each switch bank and over-current trip circuit float independently and supplied power via transformer T1 from inverter. Control of floating stages by optocouplers.

  3. Mechatronics control technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1988-03-15

    This book consists six chapters, which are an assembler grammar and practical use on Z801 8041/8048 and kind of assemblers and how to use, control of a microprocessor and mechatro with application of 8255, interface circuit and direction of DA converter, control of stepping motor such as introduction of it, sequence switch, drive program of stepping motor, control for DC motor such as normal rotation and abnormal rotation operation of DC motor by personal computer, control AC motor like PWM inverter and data communication among systems such as RS-232C and INTEL-HEXA format program.

  4. ALFA Detector Control System

    CERN Document Server

    Oleiro Seabra, Luis Filipe; The ATLAS collaboration

    2015-01-01

    ALFA (Absolute Luminosity For ATLAS) is one of the sub-detectors of ATLAS (A Toroidal LHC Apparatus). The ALFA system is composed by four stations installed in the LHC tunnel 240 m away from the ATLAS interaction point. Each station has a vacuum and ventilation system, movement control and all the required electronics for signal processing. The Detector Control System (DCS) provides control and monitoring of several components and ensures the safe operation of the detector contributing to good Data Quality. This paper describes the ALFA DCS system including a detector overview, operation aspects and hardware control through a SCADA system, WinCC OA.

  5. ALFA Detector Control System

    CERN Document Server

    Oleiro Seabra, Luis Filipe; The ATLAS collaboration

    2015-01-01

    ALFA (Absolute Luminosity For ATLAS) is one of the sub-detectors of ATLAS/LHC. The ALFA system is composed by two stations installed in the LHC tunnel 240 m away from each side of the ATLAS interaction point. Each station has a vacuum and ventilation system, movement control and all the required electronic for signal processing. The Detector Control System (DCS) provides control and monitoring of several components and ensures the safe operation of the detector contributing to good Data Quality. This paper describes the ALFA DCS system including a detector overview, operation aspects and hardware control through a SCADA system, WinCC OA.

  6. Debt Out of Control

    DEFF Research Database (Denmark)

    Achtziger, Anja; Hubert, Marco; Kenning, Peter

    2015-01-01

    In a representative sample of the German population (n = 946), we explored the links between self-control, compulsive buying, and debts. Participants completed the self-control scale (Tangney, Boone, & Baumeister, 2004) and the German Addictive Buying Scale (Raab, Neuner, Reisch, & Scherhorn, 2005......, there was a gender effect on compulsive buying: women were more prone to compulsive buying than men. Age also was significantly negatively related to compulsive buying and positively linked to self-control. Household income was not linked to self-control, compulsive buying, and debts. Implications for practice...

  7. Toxoplasmosis: Prevention and Control

    Science.gov (United States)

    ... Toxoplasmosis FAQs Toxoplasmosis & Pregnancy FAQs Epidemiology & Risk Factors Biology Disease Diagnosis Treatment Prevention & Control Resources for Health Professionals Publications Printable Resources Additional ...

  8. Scabies: Prevention and Control

    Science.gov (United States)

    ... Information Scabies FAQs Workplace FAQs Epidemiology & Risk Factors Biology Disease Diagnosis Treatment Prevention & Control Resources for Health Professionals Medications Institutional Settings Prevention ...

  9. The LHCb Run Control

    Energy Technology Data Exchange (ETDEWEB)

    Alessio, F; Barandela, M C; Frank, M; Gaspar, C; Herwijnen, E v; Jacobsson, R; Jost, B; Neufeld, N; Sambade, A; Schwemmer, R; Somogyi, P [CERN, 1211 Geneva 23 (Switzerland); Callot, O [LAL, IN2P3/CNRS and Universite Paris 11, Orsay (France); Duval, P-Y [Centre de Physique des Particules de Marseille, Aix-Marseille Universite, CNRS/IN2P3, Marseille (France); Franek, B [Rutherford Appleton Laboratory, Chilton, Didcot, OX11 0QX (United Kingdom); Galli, D, E-mail: Clara.Gaspar@cern.c [Universita di Bologna and INFN, Bologna (Italy)

    2010-04-01

    LHCb has designed and implemented an integrated Experiment Control System. The Control System uses the same concepts and the same tools to control and monitor all parts of the experiment: the Data Acquisition System, the Timing and the Trigger Systems, the High Level Trigger Farm, the Detector Control System, the Experiment's Infrastructure and the interaction with the CERN Technical Services and the Accelerator. LHCb's Run Control, the main interface used by the experiment's operator, provides access in a hierarchical, coherent and homogeneous manner to all areas of the experiment and to all its sub-detectors. It allows for automated (or manual) configuration and control, including error recovery, of the full experiment in its different running modes. Different instances of the same Run Control interface are used by the various sub-detectors for their stand-alone activities: test runs, calibration runs, etc. The architecture and the tools used to build the control system, the guidelines and components provided to the developers, as well as the first experience with the usage of the Run Control will be presented

  10. The ISOLDE control system

    Science.gov (United States)

    Deloose, I.; Pace, A.

    1994-12-01

    The two CERN isotope separators named ISOLDE have been running on the new Personal Computer (PC) based control system since April 1992. The new architecture that makes heavy use of the commercial software and hardware of the PC market has been implemented on the 1700 geographically distributed control channels of the two separators and their experimental area. Eleven MSDOS Intel-based PCs with approximately 80 acquisition and control boards are used to access the equipment and are controlled from three PCs running Microsoft Windows used as consoles through a Novell Local Area Network. This paper describes the interesting solutions found and discusses the reduced programming workload and costs that have been obtained.

  11. Internal Control: Peran Dan Perkembangannya

    OpenAIRE

    Murtin, Alek

    2000-01-01

    Perhatian terhadap pentingnya internal control dalam organisasi berjalan dari waktu ke waktu untuk meningkatkan fungsi internal control yang disesuaikan dengan perkembangan lingkungan organisasi, dimulai dengan adanya internal check, kemudian internal control system, internal control structure dan terakhir adalah internal control-integrated framework. Internal control system sempat berkembang beberapa tahun di Indonesia yang selanjutnya digantikan oleh internal control structure yang digunaka...

  12. PS Control Room

    CERN Multimedia

    CERN PhotoLab

    1963-01-01

    The good old PS Control Room, all manual. For each parameter, a knob or a button to control it; for each, a light or meter or oscilloscope to monitor it; carefully written pages serve as the data bank; phones and intercom for communication. D.Dekkers is at the microphone, M.Valvini sits in front.

  13. APS power supply controls

    International Nuclear Information System (INIS)

    Saunders, C.W.; Despe, O.D.

    1994-01-01

    The purpose of this document is to provide comprehensive coverage of the APS power supply control design. This includes application software, embedded controller software, networks, and hardware. The basic components will be introduced first, followed by the requirements driving the overall design. Subsequent sections will address each component of the design one by one. Latter sections will address specific applications

  14. Pattern Recognition Control Design

    Science.gov (United States)

    Gambone, Elisabeth A.

    2018-01-01

    Spacecraft control algorithms must know the expected vehicle response to any command to the available control effectors, such as reaction thrusters or torque devices. Spacecraft control system design approaches have traditionally relied on the estimated vehicle mass properties to determine the desired force and moment, as well as knowledge of the effector performance to efficiently control the spacecraft. A pattern recognition approach was used to investigate the relationship between the control effector commands and spacecraft responses. Instead of supplying the approximated vehicle properties and the thruster performance characteristics, a database of information relating the thruster ring commands and the desired vehicle response was used for closed-loop control. A Monte Carlo simulation data set of the spacecraft dynamic response to effector commands was analyzed to establish the influence a command has on the behavior of the spacecraft. A tool developed at NASA Johnson Space Center to analyze flight dynamics Monte Carlo data sets through pattern recognition methods was used to perform this analysis. Once a comprehensive data set relating spacecraft responses with commands was established, it was used in place of traditional control methods and gains set. This pattern recognition approach was compared with traditional control algorithms to determine the potential benefits and uses.

  15. Checking quality control?

    DEFF Research Database (Denmark)

    Brodersen, Lars

    2005-01-01

    How is quality control doing within the community of GIS, web-services based on geo-information, GI etc.?......How is quality control doing within the community of GIS, web-services based on geo-information, GI etc.?...

  16. Control of Squeezed States

    OpenAIRE

    Bloch, Anthony M.; Rojo, Alberto G.

    2000-01-01

    In this paper we consider the classical and quantum control of squeezed states of harmonic oscillators. This provides a method for reducing noise below the quantum limit and provides an example of the control of under-actuated systems in the stochastic and quantum context. We consider also the interaction of a squeezed quantum oscillator with an external heat bath.

  17. Control rod drives

    International Nuclear Information System (INIS)

    Hayakawa, Hiroyasu; Kawamura, Atsuo.

    1979-01-01

    Purpose: To reduce pellet-clad mechanical interactions, as well as improve the fuel safety. Constitution: In the rod drive of a bwr type reactor, an electric motor operated upon intermittent input such as of pulse signals is connected to a control rod. A resolver for converting the rotational angle of the motor to electric signals is connected to the rotational shaft of the motor and the phase difference between the output signal from the resolver and a reference signal is adapted to detect by a comparator. Based on the detection result, the controller is actuated to control a motor for control rod drive so that fine control for the movement of the control rod is made possible. This can reduce the moving distance of the control rod, decrease the thermal stress applied to the control rod and decrease the pellet clad mechanical interaction failures due to thermal expansion between the cladding tube and the pellets caused by abrupt changes in the generated power. (Furukawa, Y.)

  18. Security and arms control

    International Nuclear Information System (INIS)

    Kolodziej, E.A.; Morgan, P.M.

    1989-01-01

    This book attempts to clarify and define selected current issues and problems related to security and arms control from an international perspective. The chapters are organized under the following headings. Conflict and the international system, Nuclear deterrence, Conventional warfare, Subconventional conflict, Arms control and crisis management

  19. Decentralized control: An overview

    Czech Academy of Sciences Publication Activity Database

    Bakule, Lubomír

    2008-01-01

    Roč. 32, č. 1 (2008), s. 87-98 ISSN 1367-5788 R&D Projects: GA AV ČR(CZ) IAA200750802; GA MŠk(CZ) LA 282 Institutional research plan: CEZ:AV0Z10750506 Keywords : decentralized control * large-scale systems * decomposition Subject RIV: BC - Control Systems Theory Impact factor: 1.109, year: 2008

  20. Proxemic-aware controls

    DEFF Research Database (Denmark)

    Ledo, David; Greenberg, Saul; Marquardt, Nicolai

    2015-01-01

    Remote controls facilitate interactions at-a-distance with appliances. However, the complexity, diversity, and in-creasing number of digital appliances in ubiquitous com-puting ecologies make it increasingly difficult to: (1) dis-cover which appliances are controllable; (2) select a par-ticular a......Remote controls facilitate interactions at-a-distance with appliances. However, the complexity, diversity, and in-creasing number of digital appliances in ubiquitous com-puting ecologies make it increasingly difficult to: (1) dis-cover which appliances are controllable; (2) select a par......-ticular appliance from the large number available; (3) view information about its status; and (4) control the ap-pliance in a pertinent manner. To mitigate these problems we contribute proxemic-aware controls, which exploit the spatial relationships between a person's handheld de-vice and all surrounding appliances...... to create a dynamic appliance control interface. Specifically, a person can discover and select an appliance by the way one orients a mobile device around the room, and then progressively view the appliance's status and control its features in in-creasing detail by simply moving towards it. We illus...

  1. Ship Roll Motion Control

    DEFF Research Database (Denmark)

    Perez, Tristan; Blanke, Mogens

    2010-01-01

    . This tutorial paper presents an account of the development of various ship roll motion control systems and the challenges associated with their design. The paper discusses how to assess performance, the applicability of dierent models, and control methods that have been applied in the past....

  2. IBM 3705 Communications Controller

    CERN Multimedia

    1972-01-01

    The IBM 3705 Communications Controller is a simple computer which attaches to an IBM System/360 or System/370. Its purpose is to connect communication lines to the mainframe channel. It was a first communications controller of the popular IBM 37xx series.

  3. Optimal vehicle control

    NARCIS (Netherlands)

    Alirezaei, M.; Kanarachos, S.A.; Scheepers, B.T.M.; Maurice, J.P.

    2013-01-01

    The Integrated Vehicle Safety Department of TNO (Dutch Organization for Applied Scientific Research) investigates the application of modern control methods in the Integrated Vehicle Dynamics Control (IVDC) field, as a strategic research topic of the Beyond Safe framework. The aim of IVDC is to

  4. Gaze-controlled Driving

    DEFF Research Database (Denmark)

    Tall, Martin; Alapetite, Alexandre; San Agustin, Javier

    2009-01-01

    We investigate if the gaze (point of regard) can control a remote vehicle driving on a racing track. Five different input devices (on-screen buttons, mouse-pointing low-cost webcam eye tracker and two commercial eye tracking systems) provide heading and speed control on the scene view transmitted...

  5. Atomic Energy Control Board

    International Nuclear Information System (INIS)

    Blackman, N.S.; Gummer, W.K.

    1982-02-01

    This paper has been prepared to provide an overview of the responsibilities and activities of the Atomic Energy Control Board. It is designed to address questions that are often asked concerning the establishment of the Atomic Energy Control Board, its enabling legislation, licensing and compliance activities, federal-provincial relationships, international obligations, and communications with the public

  6. Structural Emergency Control Paradigm

    DEFF Research Database (Denmark)

    Vu, Thanh Long; Chatzivasileiadis, Spyros; Chiang, Hsiao-Dong

    2017-01-01

    demand and hopefully stabilize the system. This traditional emergency control results in interrupted service with severe economic damage to customers. Also, such control is usually less effective due to the lack of coordination among protective devices. In this paper, we propose a novel structural...

  7. Coalgebra, concurrency and control

    NARCIS (Netherlands)

    J.J.M.M. Rutten (Jan)

    1999-01-01

    textabstractCoalgebra is used to generalize notions and techniques from concurrency theory, in order to apply them to problems concerning the supervisory control of discrete event systems. The main ingredients of this approach are the characterization of controllability in terms of (a variant of)

  8. Multiple nuclear ADC controller

    Energy Technology Data Exchange (ETDEWEB)

    Lovett, A; Rapaport, M S [Center for Nuclear Research, Soreq (Israel)

    1980-12-01

    A controller for an on-line three parameter coincidence and multispectra scaling system has been developed. It has been designed to control, event-by-event, the outputs of three nuclear analog-to-digital converters used at the SOLIS facility. The system utilizes an HP minicomputer with a 32k-word core memory, a disc drive and magnetic tape units.

  9. Advanced Control Engineering

    DEFF Research Database (Denmark)

    Zhou, Jianjun

    1999-01-01

    This book is developed as a textbook for the course Advanced Control Engineering. The book is intended for students in mechanical engineering and its aim is to provide an understanding of modern control theory as well as methodologies and applications for state space modeling and design...

  10. Auditing measurement control programs

    International Nuclear Information System (INIS)

    Roberts, F.P.; Brouns, R.J.

    1979-10-01

    Requirements and a general procedure for auditing measurement control programs used in special nuclear material accounting are discussed. The areas of measurement control that need to be examined are discussed and a suggested checklist is included to assist in the preparation and performance of the audit

  11. Resisting Mind Control.

    Science.gov (United States)

    Anderson, Susan M.; Zimbardo, Philip G.

    1980-01-01

    Provides conceptual analyses of mind control techniques along with practical advice on how to resist these techniques. The authors stress that effective mind control stems more from everyday social relations than from exotic technological gimmicks. Suggestions are given for resisting persuasion, resisting systems, and challenging the system.…

  12. Overflow control valve

    International Nuclear Information System (INIS)

    Kessinger, B.A.; Hundal, R.; Parlak, E.A.

    1982-01-01

    An overflow control valve for use in a liquid sodium coolant pump tank which can be remotely engaged with and disengaged from the pump tank wall to thereby permit valve removal. An actuating shaft for controlling the valve also has means for operating a sliding cylinder against a spring to retract the cylinder from sealing contact with the pump tank nozzle. (author)

  13. Schistosomiasis control in Brazil

    Directory of Open Access Journals (Sweden)

    Katz Naftale

    1998-01-01

    Full Text Available In 1975 the Special Programme for Schistosomiasis Control was introduced in Brazil with the objective of controlling this parasitic disease in six northeastern states. The methodology applied varied largely from state to state, but was based mainly on chemotherapy, This Programme was modified about ten years after it beginning with the main goals including control of morbidity and the blockage of establishment of new foci in non-endemic areas. In two states, Bahia and Minas Gerais, the schistosomiasis control programme started in 1979 and 1983, respectively. The recently made evaluation of those two programmes is the main focus of this paper. It must also be pointed out, that the great majority of the studies performed by different researchers in Brazil, at different endemic areas, consistently found significant decrease on prevalence and incidence, when control measures are repeatedly used for several years. Significant decrease of hepatosplenic forms in the studied areas is well documented in Brazil. After more than 20 years of schistosomiasis control programmes in our country, chemotherapy has shown to be a very important tool for the control of morbidity and to decrease prevalence and incidence in endemic areas. Nevertheless, in medium and long terms, sanitation, water supply, sewage draining and health education seem to be the real tools when the aim is persistent and definitive schistosomiasis control.

  14. The CEBAF control system

    International Nuclear Information System (INIS)

    Watson, W.A. III.

    1995-01-01

    CEBAF has recently upgraded its accelerator control system to use EPICS, a control system toolkit being developed by a collaboration among laboratories in the US and Europe. The migration to EPICS has taken place during a year of intense commissioning activity, with new and old control systems operating concurrently. Existing CAMAC hardware was preserved by adding a CAMAC serial highway link to VME; newer hardware developments are now primarily in VME. Software is distributed among three tiers of computers: first, workstations and X terminals for operator interfaces and high level applications; second, VME single board computers for distributed access to hardware and for local control processing; third, embedded processors where needed for faster closed loop operation. This system has demonstrated the ability to scale EPICS to controlling thousands of devices, including hundreds of embedded processors, with control distributed among dozens of VME processors executing more than 125,000 EPICS database records. To deal with the large size of the control system, CEBAF has integrated an object oriented database, providing data management capabilities for both low level I/O and high level machine modeling. A new callable interface which is control system independent permits access to live EPICS data, data in other Unix processes, and data contained in the object oriented database

  15. Temperature-controlled resistor

    Science.gov (United States)

    Perkins, T. G.

    1969-01-01

    Electrical resistance of a carbon-pile resistor is controlled by the compression or relaxation of a pile of carbon disks by a thermally actuated bimetallic spring. The concept is advantageous in that it is direct-acting, can cover a wide range of controllable characteristics, and can handle considerable power directly.

  16. Control of schistosomiasis transmission

    Directory of Open Access Journals (Sweden)

    Luiz C. de S. Dias

    1995-04-01

    Full Text Available Despite the success of control programmes, schistosomiasis is still a serious public health problem in the world. More than 70 countries where 200 million individuals are evaluated to be infected of a total 600 million at risk. Though there have been important local success in the control of transmission, globally the infection has increased. Economic constrains in developing countries, environmental changes associated with migration and water resources development have been blocking the progress. The main objective of schistosomiasis control is to achieve reduction of disease due to schistosomiasis. We discussed the control measures like: health education, diagnosis and chemotherapy, safe water supplies, sanitation and snail control. We emphasized the need to give priority to school-age children and the importance of integrating the measures of control into locally available systems of health care. The control of schistosomiasis is directly related to the capacity of the preventive health services of an endemic country. The strategy of control requires long-term commitment from the international to the local level.

  17. Individual tree control

    Science.gov (United States)

    Harvey A. Holt

    1989-01-01

    Controlling individual unwanted trees in forest stands is a readily accepted method for improving the value of future harvests. The practice is especially important in mixed hardwood forests where species differ considerably in value and within species individual trees differ in quality. Individual stem control is a mechanical or chemical weeding operation that...

  18. Advanced Cruise Control (ACC).

    NARCIS (Netherlands)

    2008-01-01

    Advanced Cruise Control (ACC), also known as adaptive or intelligent cruise control, not only maintains the driver-set vehicle speed, but also adjusts the vehicle's speed to that of a preceding vehicle, and helps to maintain a pre-selected headway time to the vehicle ahead. ACC systems can have a

  19. Advanced Cruise Control (ACC).

    NARCIS (Netherlands)

    2010-01-01

    Advanced Cruise Control (ACC), ook bekend als Adaptive, Active of Intelligent Cruise Control, handhaaft niet alleen de door de bestuurder ingestelde rijsnelheid, maar stemt ook de snelheid van het voertuig af op die van de voorligger. ACC helpt op deze manier om een vooraf bepaalde volgtijd tot de

  20. Emerging Engine Control Technologies

    DEFF Research Database (Denmark)

    Hendricks, Elbert; Chevalier, Alain

    1996-01-01

    In earlier work published by the author and co-authors, a dynamic model called a Mean Value Engine Model (MVEM) was developed. This model is physically based and is intended mainly for control applications. It is especially well suited to embedded model applications in engine controllers, susch...