WorldWideScience

Sample records for controle des installations

  1. The control of base nuclear installations; Le controle des installations nucleaires de base (INB)

    Energy Technology Data Exchange (ETDEWEB)

    Anon

    2009-04-15

    The Authority of Nuclear Safety ( A.S.N). presents in this column the current events of the control of the nuclear base installations during november, december 2008 and january 2009, classified by nuclear site. This information is also available in real-time on the A.S.N. web site, www.asn.fr, in the column 'news'. We can consult all the notices of significant incident published as well as the following letters of inspection, the notices of information about the reactors shutdown, press releases and the A.S.N. information notes. (N.C.)

  2. Testing on air cleaning systems: Testing of the components in-place tests; Controle des installations d'epuration de l'air essais de conformite des elements: Tests in situ

    Energy Technology Data Exchange (ETDEWEB)

    Billard, F; Brion, J [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1967-07-01

    The reliability of air cleaning systems is dependent on testing they are submitted to. Although in-place tests are the most important as they act as final tests upon achieved plants, component tests are necessary too. They allow detection of defective units before they are installed, partition of unit defects from mounting defects and they are more sensitive. For similar reasons, material teats are most useful. The various tests are described, about aerosol filters for one part, iodine trap for the other. The checked features are: materials nature, units sizes, efficiency, air resistance, flammability, humidity resistance, temperature resistance, adsorbent friability, etc... On iodine trapping systems, small check traps, working by-pass with the main trap are periodically subjected to efficiency test. This control allow to cut down the in-place tests frequency, particularly when poisoning from organic vapours is to be feared. (authors) [French] La surete de fonctionnement des installations d'epuratition de l'air esf fonction des controles auxquels ces installations sont soumises. Si les tests in situ sont les plus importants puisqu'ils constituent le controle final de l'installation terminee, les essais de conformite des elements constitutifs sont egalement necessaires. Ils permettent l'elimination d'elements defectueux avant leur mise en place, la discrimination des defauts du montage de ceux de l'element et sont en outre plus sensibles. De meme, le controle des materiaux constitutifs de l'element s'avere fort utile. On decrit les differents controles, d'une part, pour les fittres a aerosols, d'autre part, pour les pieges a iode. Les caracteristiques verifiees sont: nature des materiaux, dimenesions des elements, efficacite, perte de charge, resistance mecanique, inflammabilite, tenue a l'humidite, tenue a la temperature, resistance au detassement des pieges a iode, friabilite du materiau adsorbant, etc... En ce qui concerne les installations de piegeage d

  3. The control of base nuclear facilities (I.N.B.); Le controle des installations nucleaires de base (INB)

    Energy Technology Data Exchange (ETDEWEB)

    Anon

    2009-02-15

    The Authority of Nuclear Safety ( A.S.N). presents in this column the current events of the control of the nuclear basic installations during august, september, october 2008, classified by nuclear site. This information is also available in real-time on the A.S.N. web site, www.asn.fr, in the column 'news'. We can consult all the notices of significant incident published as well as the following letters of inspection, the notices of information about the reactors shutdown, press releases and the A.S.N. information notes. (N.C.)

  4. Safety report concerning the reactor Pegase - volume 1 - Description of the installation - volume 2 - Safety of the installations; Rapport de surete du reacteur pegase - tome 1 - Description des installations - tome 2 - Surete des installations

    Energy Technology Data Exchange (ETDEWEB)

    Lacour, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Legoin, P. [S.E.M. Hispano-Suiza, 92 - Colombes (France)

    1964-07-01

    In the first volume: This report is a description of the reactor Pegase, given with a view to examine the safety of the installations. The Cadarache site at which they are situated is briefly described, in particular because of the consequences on the techniques employed for building Pegase. A description is also given of the original aspects of the reactor. The independent loops which are designed for full-scale testing of fuel elements used in natural uranium-gas-graphite reactor systems are described in this report, together with their operational and control equipment. In the second volume: In the present report are examined the accidents which could cause damage to the Pegase reactor installation. Among possible causes of accidents considered are the seismicity of the region, an excessive power excursion of the reactor and a fracture in the sealing of an independent loop. Although all possible precautions have been taken to offset the effects of such accidents, their ultimate consequences are considered here. The importance is stressed of the security action and regulations which, added to the precautions taken for the construction, ensure the safety of the installations. (authors) [French] Dans le volume 1: Ce rapport est une description du reacteur Pegase, afin d'examiner la surete des installations. Le site de CADARACHE ou elles sont situees, a ete sommairement decrit, en particulier, a cause des consequences sur les techniques mises en oeuvre pour la realisation de Pegase. Nous nous sommes egalement attache a decrire les aspects originaux du reacteur. Les boucles autonomes destinees a tester en vraie grandeur des elements combustibles de la filiere uranium naturel graphite-gaz, ainsi que leurs dispositifs de controle et d'exploitation, figurent egalement dans ce rapport. Dans le volume 2: Dans le present rapport, nous examinons des accidents pouvant endommager des installations du reacteur Pegase. Les origines d'accidents examines

  5. Safety report concerning the reactor Pegase - volume 1 - Description of the installation - volume 2 - Safety of the installations; Rapport de surete du reacteur pegase - tome 1 - Description des installations - tome 2 - Surete des installations

    Energy Technology Data Exchange (ETDEWEB)

    Lacour, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Legoin, P [S.E.M. Hispano-Suiza, 92 - Colombes (France)

    1964-07-01

    In the first volume: This report is a description of the reactor Pegase, given with a view to examine the safety of the installations. The Cadarache site at which they are situated is briefly described, in particular because of the consequences on the techniques employed for building Pegase. A description is also given of the original aspects of the reactor. The independent loops which are designed for full-scale testing of fuel elements used in natural uranium-gas-graphite reactor systems are described in this report, together with their operational and control equipment. In the second volume: In the present report are examined the accidents which could cause damage to the Pegase reactor installation. Among possible causes of accidents considered are the seismicity of the region, an excessive power excursion of the reactor and a fracture in the sealing of an independent loop. Although all possible precautions have been taken to offset the effects of such accidents, their ultimate consequences are considered here. The importance is stressed of the security action and regulations which, added to the precautions taken for the construction, ensure the safety of the installations. (authors) [French] Dans le volume 1: Ce rapport est une description du reacteur Pegase, afin d'examiner la surete des installations. Le site de CADARACHE ou elles sont situees, a ete sommairement decrit, en particulier, a cause des consequences sur les techniques mises en oeuvre pour la realisation de Pegase. Nous nous sommes egalement attache a decrire les aspects originaux du reacteur. Les boucles autonomes destinees a tester en vraie grandeur des elements combustibles de la filiere uranium naturel graphite-gaz, ainsi que leurs dispositifs de controle et d'exploitation, figurent egalement dans ce rapport. Dans le volume 2: Dans le present rapport, nous examinons des accidents pouvant endommager des installations du reacteur Pegase. Les origines d'accidents examines comprennent la seismicite

  6. The health physics of installations for decladding irradiated fuels or for handling radio-elements at Marcoule; La radioprotection des installations de degainage des combustibles irradies et des radio-elements a Marcoule

    Energy Technology Data Exchange (ETDEWEB)

    Chassany, J; Guillermin, P; Mallet, P [Commissariat a l' Energie Atomique, Centre de Production de Plutonium de Marcoule, 30 - Chusclan (France)

    1966-07-01

    Radiation protection practices for handling reactor fuel elements are described. Elements of considerable specific radioactivity are handled under water. A study was made of water filtration and of ventilation in the building. The installations are divided up into zones depending on the radioactive risks, and the radiation level atmospheric contamination are the object of a systematic control at various points. A description is given of all aspects of health physics which have been encountered during six years: storage, transfer of radioactive material; decladding, rolling, waste disposal, specialized operations, installations in operation and at rest, and transport. In spite of the gradual increase in the activity of these installations, the total doses received by the personnel have hardly altered and the number of cases of physical contamination has diminished. (authors) [French] Dans ces installations, se manipulent sous l'eau des elements a radioactivite specifique considerable. La filtration de l'eau, la ventilation ont ete particulierement etudiees. L'ensemble a ete divise en lieux classes en fonction des risques radioactifs et des appareils controlent en permanence l'irradiation et la contamination atmospherique en certains points. Tous les aspects de la radioprotection resultant de six annees d'experience relatifs: au stockage, au deconteneurage, au degainage, au laminage, a l'evacuation des residus, aux travaux particuliers, installations en marche et a l'arret, et aux transports sont successivement decrits. Malgre l'accroissement progressif de l'activite de cet ensemble, les doses integrees par le personnel n'ont pratiquement pas augmente et le nombre des cas de contamination corporelle a diminue. (auteurs)

  7. Fuel followed control rod installation at AFRRI

    International Nuclear Information System (INIS)

    Moore, Mark; Owens, Chris; Forsbacka, Matt

    1992-01-01

    Fuel Followed Control Rods (FFCRs) were installed at the Armed Forces Radiobiology Research Institute's 1 MW TRIGA Reactor. The procedures for obtaining, shipping, and installing the FFCRs is described. As part of the FFCR installation, the transient rod drive was relocated. Core performance due to the addition of the fuel followed control rods is discussed. (author)

  8. Economic study of an installation for uranium isotope separation by gaseous diffusion; Etude economique d'une installation de separation des isotopes de l'uranium par diffusion gazeuse

    Energy Technology Data Exchange (ETDEWEB)

    Bilous, O [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    This report describes the major problems which arise in the choice of characteristics required in a gaseous diffusion installation for the separation of uranium isotopes. This choice depends largely on economic evaluations, and also on considerations of simplicity. The choice of working pressures and of the characteristics of the membrane are described, as are the possible alternatives regarding the structure of the stages and the problems of control. (author) [French] Ce rapport decrit les problemes majeurs qui se posent dans le choix des caracteristiques d'une installation de diffusion gazeuse destinee a la separation des isotopes de l'uranium. Ce choix depend en grande partie d'evaluations economiques et repose egalement sur des considerations de simplicite. On decrit ainsi le choix des pressions d'operation, celui des caracteristiques de la barriere, les alternatives possibles concernant la structure des etages et les problemes de regulation. (auteur)

  9. Computer systems for nuclear installation data control

    International Nuclear Information System (INIS)

    1987-09-01

    The computer programs developed by Divisao de Instalacoes Nucleares (DIN) from Brazilian CNEN for data control on nuclear installations in Brazil are presented. The following computer programs are described: control of registered companies, control of industrial sources, irradiators and monitors; control of liable person; control of industry irregularities; for elaborating credence tests; for shielding analysis; control of waste refuge [pt

  10. Study of cartridge rupture detection installations; Contribution a l'etude des installations de detection de ruptures de gaine

    Energy Technology Data Exchange (ETDEWEB)

    Graftieaux, J; Douet, P; Roguin, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-07-01

    Very numerous physical or technological parameters are involved in the preparation of projects for can rupture detection installations. These parameters are connected essentially with the design of the reactor, the detector used, the disposition of the pneumatic circuits, the type of fuel and the safety required. The present report analyses the main problems arising and their mutual compatibilities; it defines a certain number of ideas which had up till now been accepted implicitly in the design. (authors) [French] De tres nombreux parametres physiques ou technologiques interviennent dans l'etablissement du projet d'une installation de detection de ruptures de gaines. Ces parametres decoulent essentiellement de la conception de la pile, du detecteur utilise, de l'organisation des circuits pneumatiques, du type du combustible et de la securite souhaitee. Le present document analyse les principaux problemes qui se posent ainsi que leurs compatibilites reciproques et precise un certain nombre de notions jusqu'alors admises implicitement lors de l'etablissement des projets. (auteurs)

  11. La circulation des poissons migrateurs : le transit à travers les turbines des installations hydroélectriques

    Directory of Open Access Journals (Sweden)

    LARINIER M.

    1989-01-01

    Full Text Available La réussite des programmes de restauration des populations de poissons migrateurs (salmonidés, alose... lancés en France ces dernières années nécessite que leur libre circulation soit assurée notamment au niveau des installations hydroélectriques. Lors de la migration d'avalaison, les dommages subis par les juvéniles au cours de leur passage à travers les turbines sont difficilement prévisibles et peuvent se révéler importants. Entre 1984 et 1986, sept expérimentations ont été réalisées en France sur divers types de turbines (FRANCIS, KAPLAN, OSSBERGER, afin de mettre au point un protocole standard d'évaluation des mortalités. Les résultats obtenus lors de ces études ont permis de compléter les données disponibles dans la bibliographie et de réaliser une analyse statistique d'ensemble. Cette analyse a montré que l'importance des dommages est étroitement liée aux caractéristiques de la turbine et à la taille des poissons. Sur les turbines FRANCIS, la mortalité est influencée par des paramètres comme les vitesses absolue et relative en entrée de roue, la vitesse de rotation ainsi que par le rapport taille du poisson à l'espace inter-aubes. Sur les turbines KAPLAN, la mortalité est surtout liée au rapport de la taille du poisson à l'espace inter-pales. Des équations de régression ont été établies qui permettent de prédire l'ordre de grandeur de la mortalité sur ces deux types de turbines pour les salmonidés et les anguillidés.

  12. Contrôle des installations d’assainissement non collectif : l’apport déterminant des outils de diagnostic non destructifs

    Directory of Open Access Journals (Sweden)

    FORQUET, Nicolas

    2012-12-01

    Full Text Available Depuis juillet 2012, un nouveau cadre juridique s’applique aux installations d’assainissement non collectif, visant à améliorer leur contrôle et leur rénovation progressive. Cette note nous présente une méthodologie de contrôle simplifié des installations élaborée grâce l’apport déterminant des outils de diagnostic non destructifs.

  13. Maintenance des équipements de transport pour l'installation des cryo-aimants dans le tunnel LHC

    CERN Document Server

    Chevalley, JM

    2005-01-01

    Le transport et l’installation de quelque 1800 cryo-aimants dans le tunnel LHC seront réalisés à l’aide d’équipements de transport et de manutention de haute technologie spécialement développés par le groupe TS-IC. La section HM devra assurer la maintenance de toute cette chaîne d’équipements : le pont roulant pour la descente des cryo-aimants dans le tunnel LHC, les véhicules de transport spéciaux alimentés dans le tunnel par la gaine monorail et enfin les tables de transfert utilisées pour la mise en place finale des cryo-aimants sur leurs vérins. Dans ce cadre, plusieurs aspects seront développés dans ce document : la mise en place et l’organisation de la maintenance, l’analyse des modes de défaillance et de leur criticité (AMDEC), les différentes méthodes possibles pour la recherche et résolution des pannes, ainsi que le suivi du projet, et ce dans le but de fiabiliser et d†™assurer le bon fonctionnement de t...

  14. Installation of cooling floors at the ``La Fayette`` shopping mall; Inbetriebnahme des Kuehldeckensystems im ``La Fayette``

    Energy Technology Data Exchange (ETDEWEB)

    Ostermann, M.; Schulte, M.

    1997-02-01

    The ``La Fayette`` shopping mall on the Friedrichstrasse in central Berlin was inaugurated in February 1996. Apart from the shopping center, the building has 7 upper storeys with offices which are served by a ventilation system and a system of cooling floors. The building and its installations are described in some detail. (orig.) [Deutsch] Das Gebaeude Galerie `La Fayette` entstand im Zentrum Berlins an der Friedrichstrasse und wurde Ende Februar 1996 eroeffnet. Ausserhalb des Kaufhausbereichs dieser Galerie befinden sich in den sieben Obergeschossen Buerobereiche, die durch eine Lueftungsanlage und ein Kuehldeckensystem versorgt werden. Die Anlage wird in diesem Beitrag naeher beschrieben. (orig.)

  15. Élaboration et gestion des plans d'installation de la machine LHC

    CERN Document Server

    Corso, Jean Pierre

    2005-01-01

    Remplir 27 km de l’étroit tunnel du LEP avec plusieurs milliers d’équipements est le défi posé par le LHC et à relever par les techniciens et ingénieurs du CERN. Le LEP avait initié ce concept avec un outil nommé LEGO ; Le LHC a encore franchi une étape avec DMU (Digital Mock-Up), en tirant profit de l’évolution significative des outils informatiques (langages de programmation et logiciels). Utilisé comme interface entre une base de données Oracle® regroupant toutes les informations sur chaque équipement et les modèles 3D standard correspondants issus d’Euclid®, DMU a étendu, depuis, son champ d’application en permettant dorénavant de générer automatiquement tous les plans d’installation des 514 demi cellules de la Machine. Les évolutions futures de la configuration du LHC nous conduiront à modifier ou déplacer les équipements en place et à en insérer de nouveaux. Ceux-ci seront introduits dans la base de données avant de pouvoir être restitués via DMU sous forme de pl...

  16. Control panel for radiation around reactors (1963); Tableaux de controle des radiations aupres des piles (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Candes, P; Barthoux, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    This report outlines the general philosophy of radiation control in French reactors and their annexes. The supervision is carried out continuously from a central control panel on which appear all the measurements made and the alarm signals. The equipment is described; one item makes it possible to measure simultaneously the radioactive dusts and gases. The specifications of the alarm system, which is considered to be the most important are given. Finally a new measuring technique is proposed which makes it possible to reduce considerably the cost of radiation control while at the same time providing the results in a form in which they can be easily treated, in particular in the case of the calculation of total doses. (authors) [French] Ce rapport definit la philosophie generale du controle des radiations dans les piles francaises et dans leurs annexes. La surveillance se fait d'une maniere continue a partir d'un tableau de controle centralise ou sont reportees toutes les mesures et les signalisations d'alarme. On decrit les appareils utilises, dont un permet la mesure simultanee des poussieres et gaz radioactifs, et on definit les specifications de la fonction alarme qui est consideree comme la plus importante. Enfin on propose une nouvelle technique de mesure qui permettrait de reduire considerablement le cout du controle des radiations tout en fournissant des resultats plus facilement exploitables, en particulier pour le calcul des doses integrees. (auteurs)

  17. Basis of conception for emergency plans of fuel cycle installations; Bases de conception des plans particuliers d`intervention des installations du cycle du combustible

    Energy Technology Data Exchange (ETDEWEB)

    Charles, T.; Mercier, J.P. [CEA Centre d`Etudes de Fontenay-aux-Roses, 92 (France). Dept. d`Evaluation de Surete; Rzepka, J.P.; Dubiau, P.; Jouve, A.C. [CEA Centre d`Etudes de Fontenay-aux-Roses, 92 (France). Dept. de Protection de l`Environnement et des Installations

    1994-12-31

    In this text we give the principles on which the fuel cycle installations emergency plans are based. The bases are the inventory of toxic and radioactive materials contained in the installation, the credible accident and the source term, the atmospheric diffusion. On these terms the risk for population is evaluated and relocation or confinement of population is taken.

  18. The cryogenic installations for irradiation in the reactors Melusine and Siloe; Les installations cryogeniques pour irradiations des reacteurs Melusine et Siloe

    Energy Technology Data Exchange (ETDEWEB)

    Bochirol, L; Le Calvez, J; Doulat, J; Verdier, J; Lacaze, A; Weil, L [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1964-07-01

    The study of defects created in solids by irradiation is of considerable fundamental and practical interest. Low temperature irradiation allows defects to be obtained in their simplest 'primary' state, not being then annihilated or rearranged by thermal motion. In-pile irradiation at low temperature raises a number of technical problems connected to 1) the necessary refrigeration power which may be considerable, 2) chemical processes which may occur under irradiation, 3) the lack of space in a reactor. Furthermore the necessity that all the irradiation and subsequent measurements be done without reheating the samples demands continuous and reliable working of the irradiation device and its being designed so as to permit removal of the samples in the cold condition or their measurement and controlled annealing 'in situ'. The way in which these problems have been solved in Grenoble for irradiation devices at 78 deg. K, 28 deg. K and 4 deg. K in the swimming-pool reactors Melusine and Siloe is described. Some operation results are given about the liquid nitrogen rig, called mark A, which has worked for several years in Melusine. In particular certain observations about chemical reactions which may occur in impure liquid nitrogen under radiation are made. The liquid nitrogen rig, called mark B, which has just been installed in the Siloe reactor, is described with some detail. The essential features of this apparatus are that irradiation can be performed in higher fluxes with it than with the former one, and that its operation is made much easier by a design which allows the samples to be introduced and removed without any disconnection of the apparatus. A liquid hydrogen loop, which has worked for one year in the Melusine reactor, is then analysed. An entirely closed hydrogen refrigerating circuit provides the coldness to the irradiation enclosure, which contains neon. Owing to this solution, the samples may be recovered in the cold condition without hydrogen being

  19. Use and regulatory control of dental X-ray installations

    International Nuclear Information System (INIS)

    1999-01-01

    In the guide the safety requirements concerning dental X-ray installations and their use, prerequisities for exemption from a safety licence, and regulatory control are presented. The guide applies to conventional dental X-ray installations, by which an image is created on an X-ray film or other image receptor placed inside the mouth, and panorama tomography installations for dentition and the cephalostats associated with these. The guide does not apply to multitechnique tomography installations intended for the special imaging of the skull or jaws

  20. Inventory of chemical releases of nuclear installations in the North-Cotentin; Inventaire des rejets chimiques des installations nucleaires du Nord-Cotentin

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-05-15

    The nuclear installations concerned by this study are Cogema La Hague, the Flamanville nuclear power plant, the Manche plant and the National Navy of Cherbourg.The objective followed by the ' source term ' work group has consisted in counting and examining the whole of existing measures relative to the releases of chemical substances in the liquid and gaseous effluents. Then because of the lack of measures for the operation first years of installations, the work group has estimated the order of magnitude of these chemical releases (essentially for Cogema La Hague). This report presents a review of the literature looking at the background levels of chemicals in different environmental compartments: air, soil, plants and animals products. these values have been summarized here to be available for comparisons with concentrations input by the North Cotentin nuclear installations, calculated by the G.R.N.C. (radioecology group of Nord Cotentin)

  1. Improvement of the greenhouse effect accounting of the waste storage installations; Ameliorer le bilan effet de serre des installations de stockage des dechets

    Energy Technology Data Exchange (ETDEWEB)

    Couturier, Ch.

    2003-07-01

    The wastes storage installations are responsible of 3 to 4 % of the greenhouse gases emissions in France and Europe. In spite of the decrease since ten years of the emissions hopeful the gas collect on the main sites, it is still possible to improve the greenhouse gases emission in the wastes disposals. The possible measures are presented: the bio-reactor, the improvement of the gas extraction systems, the choice of exploitation modes to limit the fill in times, the biogas valorization. (A.L.B.)

  2. Technique of nuclear reactors controls; Technique des controles des reacteurs nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Weill, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1953-12-15

    This report deal about 'Techniques of control of the nuclear reactors' in the goal to achieve the control of natural uranium reactors and especially the one of Saclay. This work is mainly about the measurement into nuclear parameters and go further in the measurement of thermodynamic variables,etc... putting in relief the new features required on behalf of the detectors because of their use in the thermal neutrons flux. In the domain of nuclear measurement, we indicate the realizations and the results obtained with thermal neutron detectors and for the measurement of ionizations currents. We also treat the technical problem of the start-up of a reactor and of the reactivity measurement. We give the necessary details for the comprehension of all essential diagrams and plans put on, in particular, for the reactor of Saclay. (author) [French] Nous avons aborde le probleme de la ''Technique du Controle des reacteurs nucleaires'' dans le but de realiser le controle du reacteur de Saclay. C'est ainsi que nous avons ete amene a etudier le probleme dans son ensemble, tel qu'il se pose pour tout reacteur a uranium naturel. Ce travail traite principalement du domaine des mesures a caractere nucleaire et s'etend dans le domaine des mesures thermodynamque de niveaux, etc... mettant en relief les caracteristiques nouvelles exigees de la part des detecteurs du fait de leur utilisation dans le flux de neutrons thermiques. Dans le domaine de mesures nucleaires, nous indiquons principalement les realisations et les resultats obtenus pour les detecteurs de neutrons thermiques et pour la mesure de courants d'ionisations. Nous traitons egalement du probleme technique du demarrage d'un reacteur et du probleme de la mesure de la reactivite. Nous donnons les details necessaires a la comrehension de tous les schemas et plans de cablages essentiels mis au point, en particulier, pour le reacteur de Saclay. (auteur)

  3. Illicit operation of industrial plant subject to licensing, or of other installations within the purview of the German Federal Emission Control Act (BImSchG), which have been shut down for protection against hazards (section 327, subsection 2, No. 1 Penal Code (StGB)); Das unerlaubte Betreiben von genehmigungsbeduerftigen Anlagen oder sonstigen Anlagen im Sinne des Bundes-Immissionsschutzgesetzes, deren Betrieb zum Schutz vor Gefahren untersagt worden ist (Paragraph 327 Abs.2 Nr.1 StGB)

    Energy Technology Data Exchange (ETDEWEB)

    Ocker, A.

    1995-12-31

    The 18th act of 28 March 1980 for amendment of the German Criminal Code (StGB) incorporated the provisions governing the criminal offence of illicit operation of installations subject to licensing into the StGB. These provisions have until then been forming part of the BImSchG (Federal Act on Emission Control). The study in hand presents a discussion of section 327, subsection 2, No. 1 StGB, because this provision represents a fundamental type of an administration accessory criminal offence and thus is suitable to be taken as a basis for an analysis of the scope of problems covered by the StGB, but having an effect on and being interlaced with offences governed by other acts and legal provisions. The study addresses inter alia items such as the object of legal protection defined by this section of the StGB, the provisions defining the licensability of a non-licensed installation in operation, and the consequences of defective decisions under administrative law on the applicability of criminal law provisions. The specific aspects of section 327 StGB, which are of a dominantly administrative nature, are discussed, in particular those referring to the definition of the term ``industrial installation`` as defined by the BImSchG. [Deutsch] Durch das 18. Strafrechtsaenderungsgesetz vom 28.3.1980 wurde der Straftatbestand des unerlaubten Betreibens von Anlagen, die einer Genehmigung nach dem Bundesimmissionsschutzgesetz beduerfen, aus dem BImSchG in das Kernstrafrecht ueberfuehrt. Die vorliegende Untersuchung versucht eine eingehendere Auseinandersetzung mit Para. 327 Abs. 2 Nr. 1 StGB, weil diese Vorschrift als ein Grundtypus der verwaltungsakzessorischen Straftatbestaende die Gelegenheiit zur vertieften Diskussion von umfassenderen strafrechtlichen Problemkreisen gibt. Angesprochen sind insoweit vor allem die Frage des geschuetzten Rechtsgutes der Norm, der Behandlung der materiellen Genehmigungsfaehigkeit eines ungenehmigten Anlagenbetriebs sowie der Auswirkungen von

  4. Performance evaluation on force control for ITER blanket installation

    Energy Technology Data Exchange (ETDEWEB)

    Aburadani, A., E-mail: aburadani.atsushi@jaea.go.jp [Japan Atomic Energy Agency, Mukouyama 801-1, Naka, Ibaraki 311-0193 (Japan); Takeda, N.; Shigematsu, S.; Murakami, S.; Tanigawa, H.; Kakudate, S. [Japan Atomic Energy Agency, Mukouyama 801-1, Naka, Ibaraki 311-0193 (Japan); Nakahira, M.; Hamilton, D.; Tesini, A. [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France)

    2013-10-15

    Highlights: ► It is crucial issues to avoid any jamming between the blanket modules and the keys. ► Force control for AC servo motor was developed to reduce excessive loads. ► This jam prevention force control method is directly measured and controlled by AC servo motor controllers. ► In the recent test, the module was passively positioned onto keys using the torque control method. -- Abstract: The most critical issue for the ITER blanket installation is to avoid any jamming between the blanket modules and the keys as a result of excessive loading during the module installation process. This is complicated by the limited clearance of 0.5 mm between the modules and the keys. To solve these technical issues, force control, such as controlling the torque for the AC servo motors, was developed to reduce excessive loads which may have an impact on the end-effector and to defer the forces acting on the groove of the blanket. This jam prevention force control method is directly measured and controlled by AC servo motor controllers. The AC servo motors are equipped to move the manipulator and end-effector during module installation.

  5. Performance evaluation on force control for ITER blanket installation

    International Nuclear Information System (INIS)

    Aburadani, A.; Takeda, N.; Shigematsu, S.; Murakami, S.; Tanigawa, H.; Kakudate, S.; Nakahira, M.; Hamilton, D.; Tesini, A.

    2013-01-01

    Highlights: ► It is crucial issues to avoid any jamming between the blanket modules and the keys. ► Force control for AC servo motor was developed to reduce excessive loads. ► This jam prevention force control method is directly measured and controlled by AC servo motor controllers. ► In the recent test, the module was passively positioned onto keys using the torque control method. -- Abstract: The most critical issue for the ITER blanket installation is to avoid any jamming between the blanket modules and the keys as a result of excessive loading during the module installation process. This is complicated by the limited clearance of 0.5 mm between the modules and the keys. To solve these technical issues, force control, such as controlling the torque for the AC servo motors, was developed to reduce excessive loads which may have an impact on the end-effector and to defer the forces acting on the groove of the blanket. This jam prevention force control method is directly measured and controlled by AC servo motor controllers. The AC servo motors are equipped to move the manipulator and end-effector during module installation

  6. Modélisation, simulation et contrôle des installations cryogéniques du CERN

    CERN Document Server

    Bradu, Benjamin; Gayet, P

    2010-01-01

    Cette thèse présente le développement d'un simulateur de processus cryogéniques de grande taille appliqué aux installations cryogéniques de l'accélérateur de particules LHC (Large Hadron Collider) au CERN (Organisation Européenne pour la Recherche Nucléaire). Ce simulateur est basé sur une approche de modélisation orientée objet où chaque équipement (échangeur, turbine, compresseur, etc.) est représenté à partir d'un ensemble d'équations physiques algébro-différentielles. L'architecture de contrôle du CERN est également simulée en intégrant le contrôle réalisé par des automates programmables (PLC) avec le système de supervision. Ce simulateur à été développé pour servir différents desseins comme l'entraînement des opérateurs, la vérification des programmes automates (virtual commissioning) et l'optimisation des stratégies de contrôle. Le système cryogénique d'un détecteur de particules (CMS) a d'abord été simulé pour valider les modèles, puis un liquéfacteur d'...

  7. L'évolution des messages publicitaires des entreprises financières installées en Equateur

    Directory of Open Access Journals (Sweden)

    1993-01-01

    Full Text Available L'analyse des messages publicitaires insérés dans la presse écrite et télévisée par les institutions financières de 1960 à 1991 permet d'approcher l'influence socio-culturelle de ce secteur de l'économie sur les modes de vie des strates aisées et moyennes de la population équatorienne à partir de l'exemple quiténien. Si le message a vu son support évoluer depuis trois décennies (dessin dans les années soixante, photographie durant les années soixante- dix puis images de synthèse au cours des années quatre- vingt, son image projetée se caractérise par une relative continuité thématique. Toutefois, il semble que les campagnes publicitaires financières délaissent progressivement les éléments importés et intègrent (« récupèrent » ? des caractères régionaux ou nationaux. Enfin, si dans les années soixante le système financier avait recours à un langage spécifique, il s'oriente aujourd'hui vers l'utilisation de symboles et d'éléments écrits ou visuels qui sont tout à fait intégrés à la mondialisation de la communication. LA EVOLUCIÓN DE LOS ANUNCIOS PUBLICITARIOS DE LAS EMPRESAS FINANCIERAS RADICADAS EN EL ECUADOR: UN INDICADOR DE LA MUNDIALIZACIÓN DE LA COMUNICACIÓN (1960- 1991. El análisis de los anuncios publicitarios que transmitieron las instituciones financieras por la prensa (diarios y televisión desde 1960 hasta 1991 permite enfocar la influencia sociocultural de esta área de la economía sobre los modos de vida de las categorías pudientes y medianas de la población ecuatoriana a partir del ejemplo quiteño. Si el soporte del mensaje ha cambiado rápidamente desde tres décadas (dibujo en los años sesenta, fotografía durante los años setenta e imágenes producidas a partir de computadora en el transcurso de los años ochenta, su imagen proyectada se caracteriza por una relativa continuidad temática. Sin embargo, las campañas publicitarias financieras dejan paulatinamente de lado los

  8. The nuclear installations dismantling and the management of radioactive wastes; Le demantelement des installations nucleaires et la gestion des dechets radioactifs

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-01-15

    As other industrial activities, the nuclear industry causes risks. The risks bound to the dismantling operations are known and controlled. After a presentation of the dismantling and radioactive wastes challenge, this document proposes recommendations based on the first experiences of dismantling and wastes storage. It aims then to answer to the questions relative to the cost and the financing of the operations. Finally it wonders on the public information modalities. (A.L.B.)

  9. Modélisation des installations de chauffage à eau chaude. Les économies d’énergie apportées par la mise en place des pompes à vitesse variable

    Directory of Open Access Journals (Sweden)

    Mirela Slavu

    2007-01-01

    Full Text Available L’objectif visé dans cette étude est la définition et la validation des modèles de simulation hydraulique et thermique des installations de chauffage à eau, bitube, à circulation forcée, avec des radiateurs équipés de robinets thermostatiques. Dans l’environnement du logiciel de simulation TRNSYS, le modèle de simulation de l’installation de chauffage, couplé à un modèle représentatif d’un bâtiment multizone, est ensuite utilisé pour évaluer les économies d’énergie apportées par la mise en place des pompes à vitesse variable. L’étude simulée du fonctionnement et des performances est réalisée pour une installation de chauffage d’un petit bâtiment tertiaire qui aboitte des bureaux. Les simulations sont effectuées dans l’ensemble de la saison de chauffage à l’aide de fichiers météorologiques au pas horaire. L’analyse porte principalement sur les économies d’énergie apportées par la mise en place d’une pompe à vitesse variable avec les deux types de réglage (H=const. et H -- proportionnelle.

  10. QLab 3 show control projects for live performances & installations

    CERN Document Server

    Hopgood, Jeromy

    2013-01-01

    Used from Broadway to Britain's West End, QLab software is the tool of choice for many of the world's most prominent sound, projection, and integrated media designers. QLab 3 Show Control: Projects for Live Performances & Installations is a project-based book on QLab software covering sound, video, and show control. With information on both sound and video system basics and the more advanced functions of QLab such as MIDI show control, new OSC capabilities, networking, video effects, and microphone integration, each chapter's specific projects will allow you to learn the software's capabilitie

  11. Dresses problems arising from hot-plant operation and their solution (1961); Les problemes vestimentaires poses par l'exploitation des installations actives et leurs solutions (1961)

    Energy Technology Data Exchange (ETDEWEB)

    Rodier, J; Bouzigues, H; Boutot, P [Commissariat a l' Energie Atomique, Centre de Production de Plutonium, Marcoule (France). Centre d' Etudes Nucleaires

    1961-07-01

    acceleree en periode d'incidents doivent etre traites comme le linge des centres hospitaliers. Le lavage du linge par le procede allemand du contre-courant (systeme Sulzman) se revele un procede precieux par les cadences rapides qu'il permet et, surtout, par sa faible production d'effluents liquides. Le nettoyage a sec est une technique d'avenir qui s'avere encore plus economique. Dans une laverie active, le controle des vetements traites du point de vue de la contamination residuaire peut constituer un serieux goulet d'etranglement a la production du linge propre s'il n'est pas solutionne par l'utilisation de machines automatiques a cadence rapide. Le risque encouru par le personnel d'exploitation est uniquement la contamination de l'atmosphere et des surfaces. A ce titre, l'installation doit etre traitee comme une zone active dans laquelle sont manipules journellement quelques dizaines de millicuries d'emetteurs dangereux et quelques microcuries de plutonium. (auteurs)

  12. Dresses problems arising from hot-plant operation and their solution (1961); Les problemes vestimentaires poses par l'exploitation des installations actives et leurs solutions (1961)

    Energy Technology Data Exchange (ETDEWEB)

    Rodier, J.; Bouzigues, H.; Boutot, P. [Commissariat a l' Energie Atomique, Centre de Production de Plutonium, Marcoule (France). Centre d' Etudes Nucleaires

    1961-07-01

    renouveles a cadence acceleree en periode d'incidents doivent etre traites comme le linge des centres hospitaliers. Le lavage du linge par le procede allemand du contre-courant (systeme Sulzman) se revele un procede precieux par les cadences rapides qu'il permet et, surtout, par sa faible production d'effluents liquides. Le nettoyage a sec est une technique d'avenir qui s'avere encore plus economique. Dans une laverie active, le controle des vetements traites du point de vue de la contamination residuaire peut constituer un serieux goulet d'etranglement a la production du linge propre s'il n'est pas solutionne par l'utilisation de machines automatiques a cadence rapide. Le risque encouru par le personnel d'exploitation est uniquement la contamination de l'atmosphere et des surfaces. A ce titre, l'installation doit etre traitee comme une zone active dans laquelle sont manipules journellement quelques dizaines de millicuries d'emetteurs dangereux et quelques microcuries de plutonium. (auteurs)

  13. Poultry farming buildings. Natural gas heating. Guidebook of installation rules; Batiments d`elevage avicole. Chauffage au gaz. Guide des regles d`installation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    The technical and economical performances of a poultry farm are greatly influenced by the mastery of ambient temperature during the first days of husbandry. The natural gas space heating installation must answer these requirements and also respect all safety rules concerning the personnel and the animals. In order to answer the questions of poultry farming professionals, the technical association of the natural gas industry (ATG) in France and the Groupama insurance company have redefined the new version of this brochure which integrates the recent technological advances and defines the minimum quality and safety rules required to achieve a natural gas heating installation. The different topics presented are: the gas supply (aerial fixed reservoirs), the general distribution panel (location, command systems, regulation systems for LPG installations, electrical equipments), the distribution pipes (general supply, indoor pipes, flexible pipes, pipe fittings), the heating systems (power, choice, power supply, fastening, air renewal), the check and sign and the start-up of the installation, the periodical control and maintenance operations. (J.S.)

  14. Fatigue damage of nuclear facilities; Endommagement par fatigue des installations nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    The conference on the fatigue damage of nuclear facilities, organized by the SFEN (french society of nuclear energy), took place at Paris the 23. of november 2000. Eleven papers were presented, showing the state of the art and the research programs in the domain of the sizing rules, safety, installations damage, examination and maintenance. (A.L.B.)

  15. Concentration control in an isotope separation plant; Regulation des concentrations dans une usine de separation isotopique

    Energy Technology Data Exchange (ETDEWEB)

    Jacques, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-07-01

    Concentration control is examined for the case of a gaseous diffusion plant for uranium isotope separation. The effects of various typical perturbations are described and adequate systems of corrective actions are determined according to selected criteria. (author) [French] On considere une installation de separation des isotopes de l'uranium par diffusion gazeuse. On etudie les effets sur les concentrations isotopiques de diverses perturbations type donnees a l'avance et on determine le systeme d'actions correctives qui permet de reduire ces effets d'apres un critere d'efficacite donne. (auteur)

  16. Evaluation of the impact and the releases of operating nuclear facilities; Evaluation de l'impact et des rejets des installations nucleaires en fonctionnement normal

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    The monitoring of nuclear installations releases, the associated impacts evaluation and the radiation monitoring of the environment are of an increase interest since the last ten years. Theses two days, organized by the environment section of the SFRP (French Society of Radiation Protection), aim to discuss the following topics: the development of the methods to improve radioactive elements and toxic substances releases in the environment; the structure of the environment control and the objectives of this control; the association of the local actors to the releases monitoring and to the environment control; the perspectives of evolution in matter of nuclear facilities releases management. (A.L.B.)

  17. Simulation of closed loop controlled boost converter for solar installation

    Directory of Open Access Journals (Sweden)

    Kalirasu Athimulam

    2010-01-01

    Full Text Available With the shortage of the energy and ever increasing of the oil price, research on the renewable and green energy sources, especially the solar arrays and the fuel cells, becomes more and more important. How to achieve high stepup and high efficiency DC/DC converters is the major consideration in the renewable power applications due to the low voltage of PV arrays and fuel cells. In this paper digital simulation of closed loop controlled boost converter for solar installation is presented. Circuit models for open loop and closed loop controlled systems are developed using the blocks of simulink. The simulation results are compared with the theoretical results. This converter has advantages like improved power factor, fast response and reduced hardware. .

  18. Reducing the electricity consumption of small ventilation installations; Reduktion des Elektrizitaetsverbrauchs von Klein-Lueftungsanlagen - Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Furter, R.; Casartelli, E.; Lang, M.

    2010-03-15

    This final report for the Swiss Federal Office of Energy (SFOE) takes a look at how the electricity consumption of small ventilation installations can be reduced. Residential ventilation systems - also known as comfort ventilation systems - have to fulfil demands placed on energy efficiency, comfort and hygiene. The results of exemplary measurements of the electrical power consumption that have been made in order to estimate the current situation of ventilation systems and of air handling units in apartments and single family houses are presented and discussed. Air networks were simulated at nominal air flow with different pressure losses for nine different ventilation units. The most important conclusion of this work is quoted as being that the internal pressure losses of the ventilation units have to be reduced and the design recommendation for the air network has to be reconsidered. Also the authors are of the opinion that hygiene requirements must be more rigorously respected.

  19. Meeting around industrial sites; Concertation autour des sites d'installations industrielles

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, Th. [Centre d' etude sur l' Evaluation de la Protection dans le domaine Nucleaire (CEPN), 92 - Fontenay aux Roses (France); Sene, M. [Groupement de Scientifiques pour l' Information sur l' Energie Nucleaire, 91 - Orsay (France); Melguen, M. [Electricite de France (EDF), 75 - Paris (France); Saint-Raymond, Ph. [Direction Generale de la Surete Nucleaire et de la Radioprotection, 75 - Paris (France); Oudiz, A. [Institut de Radioprotection et de Surete Nucleaire, 92 - Fontenay-aux-Roses (France); Brie, J. [Charente Nature (France); Schmitt, P. [CLS de Fessenheim, 68 (France); Verot, Y [Atofina, 92 -Paris la Defense (France); Quintin, Ch. [DRIRE Rhone Alpes, 69 (France); Dubuis, Th. [Secretariat Permanent pour la Prevention des Pollutions Industrielles, 59 - Dunkerque (France); Adelfa, J.S.; Hocquet, M.P. [CLCV, France (France); Gheerardyn, P. [MEDEF Cote d' Opale (France); Villers, S. [EDA, France (France); Modrzejewski, F. [DRIRE Nord-Pas-de-Calais (France); Gadbois, S.; Heriard-Dubreuil, G. [MUTADIS, 75 - Paris (France); Geismar, N.; Eimer, M. [CLI de Saint-Laurent (France); Andre, S. [CEA Cadarache, 13 - Saint-Paul-lez-Durance (France); Vindimian, E. [Institut National de l' Environnement Industriel et des Risques, 60 - Verneuil en Halatte (INERIS) (France); Remond-Gouilloud, M. [Universite Paris-Sorbonne, 75 (France)

    2005-07-01

    Following the research work on the ' stakes in the social dialogue around the follow-up of the nuclear industrial installations ' engaged by the I.R.S.N. in 2000, a seminar was organized on January 21. and 22., 2003 in Ville d Avray. This seminar gathered personalities of different origins (administration, institutional experts, operators, associations, Local Commissions of Information, elected representatives) to discuss and enrich the conclusions of the research work and elaborate collectively a contribution to the current remarks in France on the public debate and the processes of dialogue. The present report establishes the acts of this seminar and redraws all the discussions between the participants. (N.C.)

  20. The decommissioning of nuclear facilities; Le demantelement des installations nucleaires de base

    Energy Technology Data Exchange (ETDEWEB)

    Niel, J.Ch.; Rieu, J.; Lareynie, O.; Delrive, L.; Vallet, J.; Girard, A.; Duthe, M.; Lecomte, C.; Rozain, J.P.; Nokhamzon, J.G.; Davoust, M.; Eyraud, J.L.; Bernet, Ph.; Velon, M.; Gay, A.; Charles, Th.; Leschaeva, M.; Dutzer, M.; Maocec, Ch.; Gillet, G.; Brut, F.; Dieulot, M.; Thuillier, D.; Tournebize, F.; Fontaine, V.; Goursaud, V.; Birot, M.; Le Bourdonnec, Th.; Batandjieva, B.; Theis, St.; Walker, St.; Rosett, M.; Cameron, C.; Boyd, A.; Aguilar, M.; Brownell, H.; Manson, P.; Walthery, R.; Wan Laer, W.; Lewandowski, P.; Dorms, B.; Reusen, N.; Bardelay, J.; Damette, G.; Francois, P.; Eimer, M.; Tadjeddine, A.; Sene, M.; Sene, R

    2008-11-15

    This file includes five parts: the first part is devoted to the strategies of the different operators and includes the following files: the decommissioning of nuclear facilities Asn point of view, decommissioning of secret nuclear facilities, decommissioning at the civil Cea strategy and programs, EDF de-construction strategy, Areva strategy for decommissioning of nuclear facilities; the second one concerns the stakes of dismantling and includes the articles as follow: complete cleanup of buildings structures in nuclear facilities, decommissioning of nuclear facilities and safety assessment, decommissioning wastes management issues, securing the financing of long-term decommissioning and waste management costs, organizational and human factors in decommissioning projects, training for the decommissioning professions: the example of the Grenoble University master degree; the third part is devoted to the management of dismantling work sites and includes the different articles as follow: decommissioning progress at S.I.C.N. plant, example of decommissioning work site in Cea Grenoble: Siloette reactor decommissioning, matters related to decommissioning sites, decommissioning of french nuclear installations: the viewpoint of a specialist company, specificities of inspections during decommissioning: the Asn inspector point of view; the fourth part is in relation with the international approach and includes as follow: IAEA role in establishing a global safety regime on decommissioning, towards harmonization of nuclear safety practices in Europe: W.E.N.R.A. and the decommissioning of nuclear facilities, EPA superfund program policy for decontamination and decommissioning, progress with remediation at Sellafield, progress and experiences from the decommissioning of the Eurochemic reprocessing plant in Belgium, activities of I.R.S.N. and its daughter company Risk-audit I.r.s.n./G.r.s. international in the field of decommissioning of nuclear facilities in eastern countries

  1. Modernization Of Electrical Installation By Using Wireless Remote Control

    Directory of Open Access Journals (Sweden)

    Mawlood M Al – Hamad

    2013-05-01

    Full Text Available Great benefits can be achieved by using wireless remote control in electrical wiring systems of buildings.     Probably the main advantage of this application is the drastic saving in wiring installations, which in turn will give higher reliability, safety and economy.     The idea of this application can be summarized in the following explanation. '' Instead off connecting each point of electrical system to individual switch by wires, a remote receiver can be situated in a place near to the point. The transmitter is used to operate the point remotely. The mains are connected to the receiver which will connect or disconnect the load as required. Many points can be connected to one receiver and can be operated by one or more transmitter.

  2. Administrative Arrangement between the Atomic Control Board of Canada and le Service central de surete des installations nucleaires du Ministere de l'Industrie et de l'Amenagement du Territoire de la Republique francaise for the Exchange of Technical Information and Cooperation in the Regulation of Nuclear Safety

    International Nuclear Information System (INIS)

    1991-01-01

    This Arrangement between the Atomic Energy Control Board of Canada (AECB) and the French Central Service for the Safety of Nuclear Installations (SCSIN) entered into force on the date of its signature and will remain in effect for five years. The Arrangement provides for the exchange of information between both agencies on the regulation of nuclear facilities and intervention measures in cases of emergency. This includes information on regulatory procedures for the safety of designated nuclear facilities, notification of important events, such as serious operating incidents, reactor shutdowns ordered by the regulatory authorities, etc. (NEA) [fr

  3. Cabin fuselage structural design with engine installation and control system

    Science.gov (United States)

    Balakrishnan, Tanapaal; Bishop, Mike; Gumus, Ilker; Gussy, Joel; Triggs, Mike

    1994-01-01

    Design requirements for the cabin, cabin system, flight controls, engine installation, and wing-fuselage interface that provide adequate interior volume for occupant seating, cabin ingress and egress, and safety are presented. The fuselage structure must be sufficient to meet the loadings specified in the appropriate sections of Federal Aviation Regulation Part 23. The critical structure must provide a safe life of 10(exp 6) load cycles and 10,000 operational mission cycles. The cabin seating and controls must provide adjustment to account for various pilot physiques and to aid in maintenance and operation of the aircraft. Seats and doors shall not bind or lockup under normal operation. Cabin systems such as heating and ventilation, electrical, lighting, intercom, and avionics must be included in the design. The control system will consist of ailerons, elevator, and rudders. The system must provide required deflections with a combination of push rods, bell cranks, pulleys, and linkages. The system will be free from slack and provide smooth operation without binding. Environmental considerations include variations in temperature and atmospheric pressure, protection against sand, dust, rain, humidity, ice, snow, salt/fog atmosphere, wind and gusts, and shock and vibration. The following design goals were set to meet the requirements of the statement of work: safety, performance, manufacturing and cost. To prevent the engine from penetrating the passenger area in the event of a crash was the primary safety concern. Weight and the fuselage aerodynamics were the primary performance concerns. Commonality and ease of manufacturing were major considerations to reduce cost.

  4. Coordination des installations et survey dans les zones experimentales impératifs de collaboration et de flexibilité

    CERN Document Server

    Gayde, JC; CERN. Geneva. TS Department

    2005-01-01

    La section TS/SU-EM fournit les informations géométriques de formes, dimensions et positions des infrastructures des cavernes et des détecteurs des expériences LHC. Elle intervient à toutes les étapes de construction et ses opérations sont dépendantes des autres chantiers, des entreprises en particulier, et de la configuration changeante des lieux. Les travaux de TS/SU-EM dans les cavernes LHC font donc partie des multiples tâches que TS/LEA a pour mandat de coordonner et gérer. Bien que défini et planifié, le moment exact des interventions est souvent connu sous des délais courts, la méthodologie et les ressources devant alors être adaptées et prêtes au moment décidé. De plus, la section intervient souvent pour des opérations de contrôle de dernière minute par définition non programmées. Une communication permanente et directe entre SU et LEA a été établie pour assurer les échanges indispensables au bon déroulement du projet. Ses formes et moyens seront présentés ici.

  5. Modelisation des effets physico-techniques pour la conception des ...

    African Journals Online (AJOL)

    automatisation dans les installations industrielles a besoin d'une régulation automatique des commandes des processus technologiques pour lesquelles certaines contraintes sont à relever compte tenu des exigences des innovations scientifiques de ...

  6. Canadian Food Irradiation Facilities; Installations Canadiennes d'Irradiation des Aliments; Kanadskie ustanovki dlya oblucheniya pishchevykh produktov; Instalaciones de Irradiacion de Alimentos en el Canada

    Energy Technology Data Exchange (ETDEWEB)

    Warland, H. M.F.; MacQueen, K. F. [Atomic Energy of Canada Ltd., Commercial Products, Ottawa (Canada)

    1966-11-15

    '(AECL) a entrepris en 1956 des travaux sur l'irradiation des pommes de terre en utilisant comme source des barreaux de combustible epuise. En 1958, l'AECL a concu et fabrique le premier appareil Gammacell 220, qui est un irradiateur complet, et l'on n'a plus utilise que du cobalt-60 pour l'execution du programme d'irradiation des aliments. En 1960, la premiere autorisation du service de controle des produits alimentaires et pharmaceutiques a ete obtenue pour les pommes de terre. La phase suivante consistait a montrer aux producteurs et distributeurs de pommes de terre que le cobalt-60 est un instrument sans danger, simple et sur, et que l'irradiation entrave la germination. En 1961 l'AECL a concu et fabrique un irradiateur mobile afin d'executer le programme de demonstration. L'irradiateur a ete monte sur une remorque routiere entierement equipee et, au cours de la saison 1961/1962, 500 tonnes de pommes de terre ont ete irradiees en divers endroits du Canada oriental. En 1965, l'AECL a concu et construit le premier irradiateur commercial de denrees alimentaires pour la compagnie Newfield Products Ltd. Pendant l'execution du programme d'irradiation des pommes.de terre, l'AECL a lance des programmes communs avec des laboratoires canadiens de recherche sur les produits alimentaires, en utilisant d'autres appareils Gammacell. En 1960, l'AECL a construit une installation d'irradiation en casemate dans son etablissement d'Ottawa pour l'irradiation d'articles plus volumineux tels que des quartiers de porcs et des regimes de bananes. Au cours de l'annee 1963, l'irradiateur mobile, qui avait deja montre son utilite, a ete modifie en vue d'elargir ses applications: l'intensite de la source a ete augmentee et il a ete equipe d'un dispositif de refroidissement des produits; en outre, la remorque a ete climatisee. Ainsi transforme, il a ete utilise en Californie pour l'irradiation d'une grande variete de fruits a la station du Departement de l'agriculture des Etats-Unis, a Fresno. Le

  7. Organization and methodology applied to the control of commissioning tests to guarantee safe operation of nuclear units; Organisation et methodologie appliquees au controle des essais de mise en service pour assurer la surete de fonctionnement des tranches electronucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Clausner, J P; Jorel, M

    1990-12-01

    This paper describes the activities of the Safety Analysis Department (DAS), which provides technical support for the French safety authorities in the specific context of analysis and control of startup test programme quality at each of the different stages of the programme. These activities combine to ensure that the objective of the startup tests is reached, in particular that the functions of each safety-related system are guaranteed in all operating configurations, that the performance levels of all components in the system comply with design criteria and that defects revealed during previous tests have been dealt with correctly. The special case of French nuclear facilities, linked to unit standardization, has made it possible to acquire a large amount of experience with the startup of the 900 MWe units and has illustrated the importance of defining a startup test programme. In 1981, a working group, comprising operating organization and safety authority representatives, studied the lessons which had to be learned from 900 MWe unit startup and the improvements which could be made and taken into account in the 1300 MWe unit startup programme. To illustrate the approach adopted by the DAS, we go on to describe the lessons learned from startup of the first 1300 MWe (P4) units. (author) [French] Au sein de l'Institut de Protection et de Surete Nucleaire (IPSN), le Departement d'Analyse de Surete (DAS) constitue le support technique du Service Central de Surete des Installations Nucleaires (SCSIN) qui est l'autorite de surete francaise. A ce titre, il evalue les programmes d'essais de demarrage et emet un avis sur le traitement des problemes survenus au cours des essais. Pour ce faire, le DAS assure l'analyse du programme d'essais depuis l'elaboration des documents jusqu'a la montee du reacteur a sa puissance nominale. L'evaluation du DAS commence par une analyse approfondie des programmes de principe d'essais (PPE) qui sont etablis par Electricite de France (EDF

  8. Digitalisation in atomic pile control (1962); La digitalisation dans le controle des piles atomiques (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Furet, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-07-01

    A brief survey is first given of the general theorems of Boodle's algebra and of sequence systems using D.A. Huffmans theory. Some indications are then given concerning the setting-up and the operation of digital computers and also of the principal codes used in digital techniques. It is then shown how digitalisation in atomic pile control makes it possible to use new techniques having the following advantages in particular: greater working safety, a higher degree of centralisation, and suppression of the linear elements. A few examples are given of the application of these techniques to control, particularly with respect to the measurement of the neutronic power and of the period and also of course, to the treatment of the data and the sequence automatisms. The advantage of using digital techniques in the shutdown channels is also examined. Finally a review is given of the technology and the viability of the control devices used. (author) [French] On rappelle d'abord ici les theoremes generaux de l'algebre de Boole et des systemes a sequences en s'appuyant sur la theorie de D.A. Huffmann. On donne ensuite quelques indications sur l'agencement et le fonctionnement des calculateurs digitaux ainsi que les principaux codes utilises dans les techniques digitales. On montre alors comment la digitalisation dans le controle des piles atomiques permet d'utiliser de nouvelles techniques presentant principalement les avantages suivants: securite de fonctionnement plus grande, centralisation plus elevee et suppression des elements lineaires. Un certain nombre d'exemples sont donnes sur l'application de ces techniques au controle, particulierement en ce qui concerne la mesure de la puissance neutronique, de la periode et aussi bien entendu du traitement des informations et des automatismes a sequences. On analyse aussi l'avantage de l'utilisation des techniques digitales dans les chaines de securite. Enfin, un apercu est donne sur la technologie et la fiabilite des dispositifs

  9. The effect of cleanliness control during installation work on the amount of accumulated dust in ducts of new HVAC installations.

    Science.gov (United States)

    Holopainen, R; Tuomainen, M; Asikainen, V; Pasanen, P; Säteri, J; Seppänen, O

    2002-09-01

    The aim of this study was to evaluate the amount of dust in supply air ducts in recently installed ventilation systems. The samples for the determination of dust accumulation were collected from supply air ducts in 18 new buildings that have been constructed according to two different cleanliness control levels classified as category P1 (low oil residues and protected against contaminations) and category P2, as defined in the Classification of Indoor Climate, Construction and Building Materials. In the ducts installed according to the requirements of cleanliness category P1 the mean amount of accumulated dust was 0.9 g/m2 (0.4-2.9 g/m2), and in the ducts installed according to the cleanliness category P2 it was 2.3 g/m2 (1.2-4.9 g/m2). A significant difference was found in the mean amounts of dust between ducts of categories P1 and P2 (P < 0.008). The cleanliness control procedure in category P1 proved to be a useful and effective tool for preventing dust accumulation in new air ducts during the construction process. Additionally, the ducts without residual oil had lower amounts of accumulated dust indicating that the demand for oil free components in the cleanliness classification is reasonable.

  10. L'amélioration du milieu urbain et la réinstallation sont des moyens ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    18 févr. 2015 ... Quelle est l'efficacité des efforts déployés en Afrique du Sud pour améliorer ses centres urbains, modifier ses environnements urbains et espaces publics, donner des services aux victimes de violence et faire participer directement les collectivités touchées par la violence aux mesures de réduction de la ...

  11. 14 CFR Appendix I to Part 25 - Installation of an Automatic Takeoff Thrust Control System (ATTCS)

    Science.gov (United States)

    2010-01-01

    ... Appendix I to Part 25—Installation of an Automatic Takeoff Thrust Control System (ATTCS) I25.1General. (a... crew to increase thrust or power. I25.2Definitions. (a) Automatic Takeoff Thrust Control System (ATTCS... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Installation of an Automatic Takeoff Thrust...

  12. Study: control of atomic energy power plant; Etude de la regulation d'une installation atomique productrice d'energie

    Energy Technology Data Exchange (ETDEWEB)

    Dautray, R; Leny, J C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    We are studying the control of a very flexible atomic power plant, able to supply an independent network. Two systems have been examined: in the first the moderator pre-heats the light water, in the second, this preheating is dispensed with, subsequent to a study of the dynamics of the plant. Very complete linear approximation study is being effected on the model of the second system, all effects being taken into account. The reactor is stable at all power levels, though slight reactivity or load variations cause undamped power oscillations around the equilibrium level. (author)Fren. [French] Nous etudions la regulation d'une installation atomique d'une grande souplesse, pouvant eventuellement fournir de l'energie a un reseau isole. Deux versions de l'installation sont etudiees: dans la premiere le moderateur sert a rechauffer l'eau industrielle, mais l'etude dynamique conduit a supprimer ce rechauffage, ce qui donne la deuxieme version. On effectue sur celle-ci une etude en approximation lineaire tres complete ou l'on tient compte de differents effets. L'installation se montre stable a tous les niveaux de puissance. Toutefois, de petites perturbations de reactivite ou de charge entrainent des oscillations de puissance mal amorties autour de la position d'equilibre. (auteur)

  13. Installation for Studying the Scattering of Cold Neutrons; Installation pour l'etude de la diffusion des neutrons thermiques; Ustanovka dlya izucheniya rasseyaniya kholodnykh nejtronov; Instalacion para estudiar la dispersion de neutrones frios

    Energy Technology Data Exchange (ETDEWEB)

    Golikov, V V; Shapiro, F L; Shkatula, A; Yanik, E A [Ob' edinennyj institut yadernykh issledovanij, Dubna, Union of Soviet Socialist Republics (Russian Federation)

    1963-01-15

    Using the pulsed fut reactor in the Joint Institute for Nuclear Research, an installation was set up to investigate the spectrometry of cold neutrons. The moderator, adjoining the reactor reflector, and the beryllium filter were at the temperature of liquid nitrogen. The scatterer, located at a distance of about 0. 6 m from the moderator, was irradiated by flashes of cold neutrons, whose duration was determined by the lifetime of the neutrons in the moderator and the dispersion of the times-of-flight over a distance of 0. 6 m. The frequency of the flashes was 8/s. The steep beryllium edge of the spectrum, lying around 200 {mu}s, was used for spectrometry in the quasi-elastic range. The energy of the scattered neutrons was determined by the time-of-flight over the distance between scatterer and detector, which was about 10-40 m. ZnS + 10{sub 2}{sup 10} O{sub 3} scintillation detectors with surfaces of 300 and 2 000 cm{sup 2} were used and the efficiency, for fast neutrons, was about 60%. (author) [French] A l'aide du reacteur a flux pulse de neutrons rapides de l'Institut unifie de recherches nucleaires, les auteurs ont mis au point une installation pour la spectrometrie des neutrons thermiques. Le ralentisseur contigu au reflecteur du reacteur et le filtre deberyllium sont maintenus a la temperature de l'azote liquide. Le diffuseur, place a environ 60 cm du ralentisseur, est irradie par une bouffee de neutrons thermiques dont la duree est determinee par la vie moyenne des neutrons dans le ralentisseur et par l'etalement des temps de vol necessaires pour parcourir la distance de 60 cm. La frequence des bouffees est de 8/s. Pour la spectrometrie dans la region quasi-elastique, on utilise la bande en bordure du spectre qui correspond au beryllium et s'etale sur environ 200 {mu}s. L'energie des neutrons diffuses est determinee par la duree du parcours entre le diffuseur et le detecteur. Les auteurs ont utilise des detecteurs a scintillation a ZnS + 10{sub 2}{sup 10} O

  14. Nuclear ventilation installations. Method of control of the scrubbing coefficient of iodine trap

    International Nuclear Information System (INIS)

    1982-12-01

    The present standard aims at defining a method to control the scrubbing coefficient of radioactive iodine trapping systems, used in nuclear ventilation installations. It applies to the installations where the trapping, efficiency of radioactive iodine has to be known, tested and compared to a reference value generally included in the safety reports. It applies to the installations where the absolute pressure of the air in the ventilation systems is above 1,4. 10 5 Pa (1,4 Bar) [fr

  15. Days of dismantling activities of installations and rehabilitation of contaminated sites in France; Demantelement des installations et rehabilitation de sites contamines

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    The objective of these days, organized by the section environment of the French society of radiation protection, is to present a panorama of the activities of nuclear installations dismantling and contaminated sites rehabilitation in France, by leaning in the same time on practical cases and by stating the French rule and the national and international recommendations on the subject. These days have also for object to approach the stakes associated with the sectors of waste management and the materials generated by these activities and in a more general way, the stakes to come for the different actors of the dismantling and the rehabilitation. (N.C.)

  16. Choice of optimum size of installations for dual-purpose production of desalted water and electricity, using nuclear power; Le dimensionnement optimum des installations de production mixte d'eau sessalee et d'electricite faisant intervenir l'energie nucleaire

    Energy Technology Data Exchange (ETDEWEB)

    Gaussens, J [Commissariat a l' Energie Atomique, Paris (France)

    1966-07-01

    The author used a method starting with water and power demand curves; this leads to the rational allocation of production costs to water and power within a given market. The power demand curve is needed as it seems improbable to sell at a constant price the enormous quantity of electricity produced by a dual purpose plant. Criteria based on principles of classical economics, help to select objectively desalination methods and plant sizes. On these criteria, normative methods for tariffing action of water and power can be based, while adhering as closely as possible to structure of demand. Examples of such criteria are the maximum profit of the supplier or the maximum satisfaction of the consumers taken collectively. In the first case marginal costs must be equated to marginal revenue, in the second one marginal cost to marginal satisfaction (theory of surpluses). The plant size often determines the choice of desalination process. Therefore the shape of the water demand curve and the economic criterion adopted (public or private ownership, capital restrictions etc.) often determine in this way both size and type of plant. Before deciding on the desalination technique, market surveys and rather subtle economic analyses are therefore necessary. (author) [French] Le probleme est presente en introduisant la notion de courbes de demande d'eau et d'electricite, ce qui permet d'aboutir a un partage rationnel des couts de revient entre eau et electricite dans ]e cadre d'un marche. L'objet de l'etude est, a partir des principes de l'economie classique, de donner des criteres objectifs de selection des dimensions des installations et des techniques de dessalement et d'en deduire une methode normative de tarification des deux produits lies: eau et electricite, en collant autant que possible a la structure de la demande. Ces criteres sont en particulier, soit le maximum de benefice de l'exploitant, soit le maximum de satisfaction des utilisateurs, c'est-a-dire la realisation d

  17. The Study on quality control of nuclear power installation project

    International Nuclear Information System (INIS)

    Wu Jie

    2008-01-01

    The quality planning, quality assurance and quality control are discussed by applying the quality control (QC) theory and combining the real situation of the Qinshan II project. This paper is practical and plays an active role in instruction of project quality control by applying the above QC theory and control techniques. (authors)

  18. Determination of radioactive risks connected with the working of a nuclear plant; Evaluation des risques radioactifs lies au fonctionnement d'une installation nucleaire

    Energy Technology Data Exchange (ETDEWEB)

    Lavie, J M; Doury, A [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    Numerous problems which are posed by the evaluation of the radioactive risks linked to the working of a nuclear plant are new problems which have not yet been satisfactorily solved. In these conditions this study must be considered only as a preliminary approach whose essential aims are the following: - development and synthesis of the existing data; - rapid determination of conservative and usable orders of greatness for the security factors, both for normal working and in the case of an accident. The most probable typical accidents are reviewed together with the nature of the resulting risks and the principal factors on which these risks depend. Among these factors, one of the most important is atmospheric diffusion which is studied in some detail using the analytic model due to Sutton. A logical graphical presentation increasing the flexibility in the use of the results and presents the responsible authorities with a flexible, practical and rapid means of evaluating the risks involved starting from a sufficiently general system of initial and simultaneously valid conditions (types of accident, atmospheric conditions). (author) [French] De nombreux problemes souleves par l'evaluation des risques radioactifs lies au fonctionnement d'une installation nucleaire sont des problemes nouveaux qui n'ont pas encore recu de solution satisfaisante. Dans ces conditions cette etude ne doit etre consideree que comme une premiere approche dont les objectifs essentiels sont les suivants: - mise au point et synthese de donnees existantes; - determination rapide d'ordres de grandeur conservatifs et utilisables de valeurs de securite, tant en fonctionnement normal qu'en cas d'accident. Les accidents types les plus probables sont passes en revue ainsi que la nature des risques qui en decoulent et les principaux facteurs dont dependent ces risques. Parmi ces facteurs, l'un des plus importants est la diffusion atmospherique qui fait l'objet d'une etude particuliere a l'aide du modele

  19. Method for installing a control rod driving device in a reactor

    International Nuclear Information System (INIS)

    Sato, Haruo; Watanabe, Masatoshi.

    1975-01-01

    Object: To install a device using a wire rope, including individually moving up and down a control rod and a control rod driving device thereby enabling to install them within a low house and to reduce time required for installing operation. Structure: The control rod is temporarily attached to a support structure for the control rod driving device, the control rod driving device is suspended on a crane positioned upwardly of the support structure, a rope connected to the control rod driving device is connected to the control rod, a sagged portion of the rope is then wound about a rotary cylinder, the control rod is disconnected from its temporary attachment, and the wound rope is wound back while the rotary cylinder is rotated to move down the control rod. After the rope has been released from the rotary cylinder, the control rod driving device is moved down by the crane. (Kamimura, M.)

  20. Status of safety at Areva group facilities. 2006 annual report; Etat de surete des installations nucleaires. Rapport annuel 2006

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    This report presents a snapshot of nuclear safety and radiation protection conditions in the AREVA group's nuclear installations in France and abroad, as well as of radiation protection aspects in service activities, as identified over the course of the annual inspections and analyses program carried out by the General Inspectorate in 2006. This report is presented to the AREVA Supervisory Board, communicated to the labor representation bodies concerned, and made public. In light of the inspections, appraisals and coordination missions it has performed, the General Inspectorate considers that the nuclear safety level of the AREVA group's nuclear installations is satisfactory. It particularly noted positive changes on numerous sites and efforts in the field of continuous improvement that have helped to strengthen nuclear safety. This has been possible through the full involvement of management teams, an improvement effort initiated by upper management, actions to increase personnel awareness of nuclear safety culture, and supervisors' heightened presence around operators. However, the occurrence of certain events in facilities has led us to question the nuclear safety repercussions that the changes to activities or organization on some sites have had. In these times of change, drifts in nuclear safety culture have been identified. The General Inspectorate considers that a preliminary analysis of the human and organizational factors of these changes, sized to match the impact the change has on nuclear safety, should be made to ensure that a guaranteed level of nuclear safety is maintained (allowance for changes to references, availability of the necessary skills, resources of the operating and support structures, etc.). Preparations should also be made to monitor the changes and spot any telltale signs of drift in the application phase. Managers should be extra vigilant and the occurrence of any drift should be systematically dealt with ahead of

  1. Installing and detaching apparatus for a control rod drive mechanism

    International Nuclear Information System (INIS)

    Akimoto, Seiichi; Watanabe, Mitsuhiro; Yoshida, Tomiharu; Sugaya, Jun-ichi; Saito, Takashi.

    1976-01-01

    Object: To facilitate maintenance and repair of a control rod drive mechanism. Structure: The apparatus comprises a means moving in a moving direction of a control rod within a reactor vessel, said moving means having a housing mounted thereon, a means mounted on the reactor vessel to release a connection between a control rod drive mechanism connected to the control rod and the control rod, and a means for mounting and removing a fixing means which connects the reactor vessel to the control rod drive means. With this arrangement, cooling water of high radioactivity level may not be leaked outside to thereby notably reduce dangerousness of exposure and materially cut time required for mounting and removing the control rod drive mechanism. (Ohara, T.)

  2. Feasible research on VLLW disposal in control area of nuclear installation

    International Nuclear Information System (INIS)

    Kong Jinsong; Guo Weiqun

    2013-01-01

    Based on the basic requirements on the VLLW landfill disposal specified by the national codes and standards, a on-site disposal of VLLW in the control area of nuclear installation was proposed. A detail analysis of the advantages and disadvantages about the disposal method and the problem to be solved were described. Results showed that the on-site disposal of VLLW in the control area of nuclear installation was feasible in practice. (authors)

  3. The dismantling of nuclear installations and the radioactive wastes management. Report of the President of the Republic followed by the answers of concerned administrations and organisms; Le demantelement des installations nucleaires et la gestion des dechets radioactifs. Rapport au President de la Republique suivi des reponses des administrations et des organismes interesses

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-01-15

    The discussed subjects concerns the situation and the challenges of the nuclear installations dismantling and the radioactive wastes management (main intervenors, panorama of the situation, rules applied to the dismantling and the radioactive wastes), the first experiences of dismantling and radioactive wastes disposal (experiences at the CEA and EDF, implementing of solutions for the disposal), interrogations and certainties (provision for future expenses, public information). (A.L.B.00.

  4. Integrated control and diagnostic system architectures for future installations

    International Nuclear Information System (INIS)

    Wood, R.; March-Leuba, J.

    2000-01-01

    Nuclear reactors of the 21st century will employ increasing levels of automation and fault tolerance to increase availability, reduce accident risk, and lower operating costs. Key developments in control algorithms, fault diagnostics, fault tolerance, and distributed communications are needed to implement the fully automated plant. It will be equally challenging to integrate developments in separate information and control fields into a cohesive system, which collectively achieves the overall goals of improved safety, reliability, maintainability, and cost-effectiveness. Under the Nuclear Energy Research Initiative (NERI), the US Department of Energy is sponsoring a project to address some of the technical issues involved in meeting the long-range goal of 21st century reactor control systems. This project involves researchers from Oak Ridge National Laboratory, the University of Tennessee, and North Carolina State University. The research tasks under this project focus on some of the first-level breakthroughs in control design, diagnostic techniques, and information system design that will provide a path to enable the design process to be automated in the future. This paper describes the conceptual development of an integrated nuclear plant control and information system architecture, which incorporates automated control system development that can be traced to a set of technical requirements. The expectation is that an integrated plant architecture with optimal control and efficient use of diagnostic information can reduce the potential for operational errors and minimize challenges to the plant safety systems

  5. Safety precautions in atomic pile control (1962); Securite dans le controle des piles atomiques (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Furet, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-07-01

    We have been led to study the problem of safety in atomic pile control as a result of our participation on the one hand in the planning of C.E.A. atomic piles, and on the other hand in the pile safety sub omission considering atomic pile safety of operational or planned C.E.A. piles. We have thus had to consider the wishes occurring in piles during their operation and also their behaviour in the dynamic state The present work deals mainly with the importance of intrinsic safety devices, with the influence of reactivity variations on the power fluctuations during accidental operation, and with the development of robust and reliable safety appliances. The starting p accident has been especially studied both for low-flux piles where a compromise is necessary between the response time of the safety appliances and the statistical fluctuations and for high lux piles where xenon poisoning has an effect on the lower limit of the velocity of reactivity liberation. The desirability has been stressed of automation as a safety factor in atomic pile control. The details required for an understanding of the diagrams of the apparatus are given. (author) [French] Nous avons aborde le probleme de la securite dans le controle des piles atomiques a la suite de notre participation d'une part aux avant rojets de piles atomiques du CE.A. et d'autre part a l'examen au sein de la sous ommission de surete des piles, de la securite des piles du CE.A. en fonctionnement ou en projet. Nous avons ete amenes a nous interesser alors aux risques encourus par les piles pendant leur fonctionnement et par la meme a leur comportement en regime dynamique. Ce travail traite principalement de l'importance des securites intrinseques, de l'influence des variations de reactivite sur les evolutions de puissance en regime d'accident et du developpement d'appareillages de securite robustes et de fonctionnement tres sur. L'accident de demarrage a ete particulierement

  6. Safety precautions in atomic pile control (1962); Securite dans le controle des piles atomiques (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Furet, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-07-01

    We have been led to study the problem of safety in atomic pile control as a result of our participation on the one hand in the planning of C.E.A. atomic piles, and on the other hand in the pile safety sub omission considering atomic pile safety of operational or planned C.E.A. piles. We have thus had to consider the wishes occurring in piles during their operation and also their behaviour in the dynamic state The present work deals mainly with the importance of intrinsic safety devices, with the influence of reactivity variations on the power fluctuations during accidental operation, and with the development of robust and reliable safety appliances. The starting p accident has been especially studied both for low-flux piles where a compromise is necessary between the response time of the safety appliances and the statistical fluctuations and for high lux piles where xenon poisoning has an effect on the lower limit of the velocity of reactivity liberation. The desirability has been stressed of automation as a safety factor in atomic pile control. The details required for an understanding of the diagrams of the apparatus are given. (author) [French] Nous avons aborde le probleme de la securite dans le controle des piles atomiques a la suite de notre participation d'une part aux avant rojets de piles atomiques du CE.A. et d'autre part a l'examen au sein de la sous ommission de surete des piles, de la securite des piles du CE.A. en fonctionnement ou en projet. Nous avons ete amenes a nous interesser alors aux risques encourus par les piles pendant leur fonctionnement et par la meme a leur comportement en regime dynamique. Ce travail traite principalement de l'importance des securites intrinseques, de l'influence des variations de reactivite sur les evolutions de puissance en regime d'accident et du developpement d'appareillages de securite robustes et de fonctionnement tres sur. L'accident de demarrage a ete particulierement developpe aussi bien pour les piles a bas

  7. Piles used for the nuclear control of materials; Empilements pour le controle nucleaire des materiaux

    Energy Technology Data Exchange (ETDEWEB)

    Raievski, V; Sautiez, B; Bailly du Bois, B; Tretiakoff, O; Thome, P; Vidal, R; Koppel Martelly, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    The devices which make it possible to check on the nuclear qualities of the materials used in reactor construction are described. These verifications bear on substantial masses of materials, following the last stage of their machining. The components found in all these are a graphite pile into which the material to be investigated is inserted, a source of neutrons made up of an Ra-Be system, and a proportional BF{sub 3} counter. The devices described here bear on checking graphite, beryllium oxide and uranium absorption, as well as on a verification of the {sup 235}U content of fuel elements. (author)Fren. [French] On decrit des dispositifs permettant de controler les qualites nucleaires de materiaux utilises dans la construction des piles. Ce controle s'effectue sur des masses importantes de materiaux apres la phase finale d'usinage. Ces dispositifs ont en commun un empilement de graphite recevant le materiau a etudier, une source de neutrons de Ra-Be et un compteur proportionnel a BF{sub 3}. Les dispositifs decrits concernent le controle de l'absorption du graphite, de la glucine et de l'uranium, ainsi que le controle de la teneur en {sup 235}U des elements de combustion. (auteur)

  8. Cost Control Guide For Decommissioning Of Nuclear Installations

    International Nuclear Information System (INIS)

    2013-01-01

    This cost control guide was prepared in response to the request from the OECD/NEA Working Party on Decommissioning and Dismantling (WPDD) - Decommissioning Cost Estimation Group (DCEG) to offer the industry guidance in preparing and implementing cost and schedule controls during decommissioning. The DCEG sent out a survey questionnaire in 2010 soliciting comments from OECD member states on their use of cost controls during decommissioning. While the response was limited, the consensus was to proceed with the preparation of this guide. Cost and schedule control systems have been in use for more than 30 years, and in the last 10 years or so have evolved into a more formalised earned value management system (EVMS). This guide is based on the internationally recognised standard, Earned Value Management Systems (ANSI, 2007). The EVMS is built on a work breakdown structure (WBS) of decommissioning activities, and a defined process for controlling a project. The EVMS not only provides measurement of project status and future performance, but also builds a structure and culture for accountability on project performance. This guide describes the performance metrics used to determine the value earned based on what was planned to be done, what was actually accomplished and what it actually cost. Variances measured monthly at a minimum indicate where potential problems are arising and raise a flag for the project manager to implement corrective actions for the next reporting period. The success of the EVMS programme depends on management commitment to implement a culture change for its employees, and to impose the EVMS on potential future contractors performing decommissioning work at a facility. Formal training is required to ensure all elements of the process are understood and put into action. It is recommended to begin with a small project, and graduate to larger projects as the staff learns how to use the system. The EVMS process has been used internationally for small

  9. Dimensional control and check of field machining parts for reactor internals installation

    International Nuclear Information System (INIS)

    Zhang Caifang

    2010-01-01

    Some key issues of dimensional control for reactor internals installation are analyzed, and important technical requirements of crucial quality control elements on the measurement, machining, and checking of reactor internals filed machining parts are discussed. Moreover, provisions on quality control and risk prevention of reactor internals filed machining parts are presented in this paper. (author)

  10. ENGINEERING AND ECONOMIC FACTORS AFFECTING THE INSTALLATION OF CONTROL TECHNOLOGIES FOR MULTIPOLLUTANT STRATEGIES

    Science.gov (United States)

    The report evaluates the engineering and economic factors associated with installing air pollution control technologies to meet the requirements of strategies to control sulfur dioxide (SO2), oxides of nitrogen (NOX), and mercury under the Clear Skies Act multipollutant control s...

  11. FAWA - Field-analysis of Heat-pump Installations - Proceedings; Tagungsband zur 11. Tagung des Forschungsprogramms Umgebungswaerme, Waerme-Kraft-Kopplung, Kaelte des Bundesamts fuer Energie (BFE)

    Energy Technology Data Exchange (ETDEWEB)

    Rognon, F.

    2004-07-01

    These proceedings of the 11th conference organised by the Swiss Federal Office of Energy's Research Programme on Ambient Heat, Combined Heat and Power and Refrigeration present 6 papers on heat-pump topics. These include two papers concerning the results obtained from the FAWA project - a unique study of over 230 heat pump installations in operation in the field that was started in 1996 to assess the success of Swiss heat-pump promotion activities. The activities of the Swiss Heat-pump Testing Centre are dealt with and the potential for cost reductions through the optimal choice of system - done according to the motto 'small and simple is beautiful' - is reviewed. A further contribution deals with the question of the heat-pump customer being the 'king'. The role of installers and fitters acting as the instances who choose which system is to be used is looked at in a further contribution. A list of useful addresses completes the proceedings.

  12. Controlled Fab installation onto polymeric micelle nanoparticles for tuned bioactivity

    Science.gov (United States)

    Chen, Shaoyi; Florinas, Stelios; Teitgen, Abigail; Xu, Ze-Qi; Gao, Changshou; Wu, Herren; Kataoka, Kazunori; Cabral, Horacio; Christie, R. James

    2017-12-01

    Antibodies and antigen-binding fragments (Fabs) can be used to modify the surface of nanoparticles for enhanced target binding. In our previous work, site-specific conjugation of Fabs to polymeric micelles using conventional methods was limited to approximately 30% efficiency, possibly due to steric hindrance related to macromolecular reactants. Here, we report a new method that enables conjugation of Fabs onto a micelle surface in a controlled manner with up to quantitative conversion of nanoparticle reactive groups. Variation of (i) PEG spacer length in a heterofunctionalized cross-linker and (ii) Fab/polymer feed ratios resulted in production of nanoparticles with a range of Fab densities on the surface up to the theoretical maximum value. The biological impact of variable Fab density was evaluated in vitro with respect to cell uptake and cytotoxicity of a drug-loaded (SN38) targeted polymeric micelle bearing anti-EphA2 Fabs. Fab conjugation increased cell uptake and potency compared with non-targeted micelles, although a Fab density of 60% resulted in decreased uptake and potency of the targeted micelles. Altogether, our findings demonstrate that conjugation strategies can be optimized to allow control of Fab density on the surface of nanoparticles and also that Fab density may need to be optimized for a given cell-surface target to achieve the highest bioactivity.

  13. Remote system for monitoring and control of controlled area of nuclear installation

    International Nuclear Information System (INIS)

    Assuncao, Daniel Gomes de; Minhoni, Danilo Carlos Rossetto; Farias, Marcos Sant'anna de; Santos, Isaac J.A. Luquetti dos

    2011-01-01

    The maintenance activities in controlled areas of nuclear facilities require adequate planning and control so that these activities do not cause to the worker an undue exposure to radioactivity. For maximum safety of workers from these places, there are standards that determine the maximum radiation dose that a worker can receive. From this context, the objective of this research is to develop a remote system that shows remotely the maintenance tasks being carried out in this work environment; monitors information provided by radiation monitoring devices installed at workplace; tracks the time to carry out scheduled maintenance, reporting alarm if this time is exceeded or not. The system has video camera, radiation monitoring device, interface card to transmit data via ethernet and graphical user interface, developed using the LABVIEW application. The principal objective is to improve the safety and to preserve the worker's health. (author)

  14. Remote system for monitoring and control of controlled area of nuclear installation

    Energy Technology Data Exchange (ETDEWEB)

    Assuncao, Daniel Gomes de; Minhoni, Danilo Carlos Rossetto [Departamento de Ciencias da Administracao e Tecnologia. Centro Universitario de Araraquara (UNIARA) Araraquara, SP (Brazil); Farias, Marcos Sant' anna de; Santos, Isaac J.A. Luquetti dos, E-mail: luquetti@ien.gov.br [Instituto Engenharia Nuclear (IEN/CNEN-RJ), Rio Janeiro, RJ (Brazil). Divisao de Instrumentacao e Confiabilidade Humana

    2011-07-01

    The maintenance activities in controlled areas of nuclear facilities require adequate planning and control so that these activities do not cause to the worker an undue exposure to radioactivity. For maximum safety of workers from these places, there are standards that determine the maximum radiation dose that a worker can receive. From this context, the objective of this research is to develop a remote system that shows remotely the maintenance tasks being carried out in this work environment; monitors information provided by radiation monitoring devices installed at workplace; tracks the time to carry out scheduled maintenance, reporting alarm if this time is exceeded or not. The system has video camera, radiation monitoring device, interface card to transmit data via ethernet and graphical user interface, developed using the LABVIEW application. The principal objective is to improve the safety and to preserve the worker's health. (author)

  15. Activities of the control services; Activites des services du controle

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This paper summarizes the control activities of the technical service of electric power and big dams: annual examinations, administrative instructions (draining, floods, granting renewal), decennial examinations etc. (J.S.)

  16. Quality control of a virtual simulation installation. SFPM report nr 25, August 2009

    International Nuclear Information System (INIS)

    Foulquier, Jean-Noel; Allieres, Norbert; Batalla, Alain; Beaumont, Stephane; Di Bartolo, Cristelle; Khodri, Mustapha; Tauziede, Jean-Marc; Dedieu, Veronique; Bramoule, Celine; Caselles, Olivier; Lacaze, Brigitte; Mazurier, Jocelyne

    2009-08-01

    This report is a notably comprehensive guide for the different controls which can be performed on devices present in a Virtual Simulation installation. After a brief historical recall, the authors present the definition and organisation of a virtual simulation, the different components of a virtual simulation installation, and the different steps of virtual simulation process. Then, they address the quality control of the scanner-simulator (linearity and periodicity of controls, patient table or support, tolerance levels and periodicity of controls of this support). They address tracking systems (quality control of laser systems), the quality control of virtual simulation tools (iso-centre contouring and positioning, ballistic tools, tolerance levels, control periodicity), the quality control of data transfer or objects (elements to be analysed during an image transfer, tolerance levels and control periodicity), the imager quality control, and tests phantoms (the physical and digital phantoms)

  17. Some mathematical aspects of creation of the control system for a physical installation

    International Nuclear Information System (INIS)

    Efimov, K.M.; Efimova, T.E.; Zagurskij, A.B.

    1988-01-01

    The article presented is a result of investigations connected to the problems of the software creation for the linear accelerator automatic control system. The problems considered arise before each scientific group engaged in the development of the automatic control complex for a physical installation. The possible ways of solving such problems are discussed

  18. Extraction liquide-liquide des sels minéraux. Approximation analytique des isothermes de partage. Application au calcul sur ordinateur d'une installation Liquid-Liquid Extraction of Mineral Salts. Analytical Approximation of Partition Isotherms. Application to the Computer Designing of an Installation

    Directory of Open Access Journals (Sweden)

    Chaid M. T.

    2006-11-01

    Full Text Available Cet article comporte deux parties -dans la première on a calculé les isothermes de partage en partant des considérations thermodynamiques basées sur les travaux de Guggenheim. Les résultats ne sont bons que dans le cas des solutions idéales. On a donc simulé les isothermes par des fonctions analytiques. Celles-ci permettent de représenter convenablement tous les faisceaux d'isothermes quelles que soient l'acidité de la solution aqueuse et les concentrations dans les deux phases; - la deuxième partie est réservée au calcul d'une installation complète d'extraction avec colonne de récupération; le calcul, mené sur ordinateur, utilise les fonctions analytiques précédentes et permet d'obtenir les débits et les concentrations à chaque plateau. This article contains two parts: - the first part discusses the calculating of partition isotherms using thermodynamic considerations based on research by Guggenheim. The results are good only in the case of ideal solutions. Therefore, isotherms were simulated by ànalyticfunctionswhich are suitable for representing all isotherm bundles no matter what the acidity of the aqueous solution and the concentrations in both phases moy be. - the second part 'deals' with designing a complete extraction installation with a recovery column. Computerized designing makes use of the preceding analytic functions and enables flowrates and concentrations ta be determined at each plate.

  19. Geothermal probes and heat pump installation at the Gerzensee training centre; EWS-WP des Studienzentrums Gerzensee/BE

    Energy Technology Data Exchange (ETDEWEB)

    Kuhn, P.

    2004-07-01

    This preliminary report for the Swiss Federal Office of Energy (SFOE) presents the results of a refurbishment project at the Swiss National Bank's training centre in Gerzensee, Switzerland. Eight air-water heat pumps with a total heating capacity of 180 kW were replaced by two ground-coupled heat pumps, each with a heating capacity of 120 kW. The geothermal probes are additionally used for free-cooling during the summer season. An oil-fired boiler used for meeting peak-load and back-up purposes, was also replaced for reasons of higher energy efficiency. Both investments and running costs of the heating system are presented along with details on expenses for electrical installations and building adaptations. The improvements in energy-saving, when compared with the former air-water heat pump system, are impressive: Total energy consumption for space heating, hot water and for ventilation systems was lowered by around 54%. The oil consumption has been reduced from 34,800 to 6,600 litres/year, which corresponds to a reduction of 81%. Also, electrical power consumption by the heat pump installation was lowered by around 8%. Figures are given on the proportion of heating supplied by the heat-pump system that now covers 90.6% of total demand.

  20. La durabilité des géosynthétiques dans les installations de stockage de déchets : le projet Durageos DURAGEOS. Durability of geosynthetics used in landfills

    Directory of Open Access Journals (Sweden)

    FARCAS, Fabienne ; PONS, Carlos ; BOUCHEZ, Théodore ; MAZÉAS, Laurent ; MÉRY, Jacques ; TOUZE-FOLTZ, Nathalie ; DURRIEU, Claude ; FAYOLLE, Bruno ; RICHAUD, Emmanuel ; LANOË, Marie ; MARTINS, Jean ; PIERSON, Patrick ; SALDI, Fethi

    2012-08-01

    Full Text Available Les géosynthétiques sont de plus en plus utilisés pour renforcer les barrières d'étanchéité des installations de stockage des déchets non dangereux. Afin de réduire l'impact environnemental des installations, les utilisateurs de ces matériaux ont donc besoin de guides et de recommandations sur leur mise en œuvre délicate, mais également d'estimations sur leur durée de vie. Cet article nous présente les moyens mis en œuvre par le projet Durageos pour mieux connaître et prédire les processus de vieillissement des géomembranes en polyéthylène haute densité et des géosynthétiques bentonitiques.The DURAGEOS project studies geosynthetics (HDPE geomembranes and GCLs ageing mechanisms under combined action of mechanical stresses, microorganisms and/or oxygen in connection with mass transfer. Physico-chemical and mechanical features of model and commercial geosynthetics aged in laboratory allow the development of a kinetic model of prediction of the lifetime coupled to a model of mass transfer. The models will be validated by geosynthetics sampled on landfill sites. Ecotoxicological risks and environmental external costs of transfers are to be assessed.

  1. Wind power installations in Switzerland - Checklist for investors in large-scale installations; Eoliennes en Suisse. Liste de controle pour investisseurs de grandes installations

    Energy Technology Data Exchange (ETDEWEB)

    Ott, W.; Kaufmann, Y.; Steiner, P. [Econcept AG, Zuerich (Switzerland); Gilgen, K.; Sartoris, A. [IRAP-HSR, Institut fuer Raumentwicklung an der Hochschule fuer Technik Rapperswil, Rapperswil (Switzerland)

    2008-07-01

    This report published by the Swiss Federal Office of Energy (SFOE) takes a look at a checklist for investors in large-scale wind-power installations. The authors state that the same questions are often posed in the course of the planning and realisation of wind turbine installations. This document presents a checklist that will help achieve the following goals: Tackling the steps involved in the planning and implementation phases, increasing planning security, systematic implementation in order to reduce risks for investors and to shorten time-scales as well as the reduction of costs. Further, participative processes can be optimised by using comprehensively prepared information in order to reduce the risk of objections during project approval. The structure of the check-list is described and discussed.

  2. An automatic system for controlling the quality of straws installed in the ATLAS TRT detector

    CERN Document Server

    Golunov, A O; Gousakov, Yu V; Kekelidze, G D; Livinski, V V; Mouraviev, S V; Parzycki, S S; Peshekhonov, V D; Price, M J; Savenkov, A A

    2004-01-01

    This article describes an automatic system to control the quality of straws installed in the wheels of the end-cap Transition Radiation Tracker of the ATLAS experiment. The system tests both the straightness and the electrical insulation of the straws during installation. The testing time per straw is 9s; consequently it takes about 2h to measure one layer of straws. The off-line analysis takes 20s per straw. With this system defects can be immediately detected and corrected. This clearly influences the future performance of the detector.

  3. System design and installation for RS600 programmable control system for solar heating and cooling

    Science.gov (United States)

    1978-01-01

    Procedures for installing, operating, and maintaining a programmable control system which utilizes a F8 microprocessor to perform all timing, control, and calculation functions in order to customize system performance to meet individual requirements for solar heating, combined heating and cooling, and/or hot water systems are described. The manual discusses user configuration and options, displays, theory of operation, trouble-shooting procedures, and warranty and assistance. Wiring lists, parts lists, drawings, and diagrams are included.

  4. On Orientation Control of Suspended Blade During Installation in Wind Turbines

    DEFF Research Database (Denmark)

    Schmidt, Lasse; Roemer, Daniel Beck; Pedersen, Henrik Clemmensen

    2015-01-01

    This paper discusses problems involved in the procedure for offshore installation of blades in wind turbines, due to wind loads. In general the high winds at sea provides for nearly optimal conditions for harvesting energy via wind turbines due to the often high wind speeds and low turbulence...... intensity. However, the very same features also call for great difficulties during installation of the wind turbine blades, making this process extremely difficult, expensive and time consuming. Often the blades are hoisted to the wind turbine hub via cranes and sought held in appropriate positions by so......-called taglines/wires, but still significant motion oscillations of blade root ends are experienced, even at rather low wind speeds. The paper considers the possibility to dampen the oscillating motions via control of the tagline lengths. The main control strategy considered, is the possibility to control...

  5. Installation for analytic chemistry under irradiation; Installation de chimie analytique sous rayonnement

    Energy Technology Data Exchange (ETDEWEB)

    Fradin, J; Azoeuf, P; Guillon, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1966-07-01

    An installation has been set up for carrying out manipulations and chemical analyses on radioactive products. It is completely remote-controlled and is of linear shape, 15 metres long; it is made up of three zones: - an active zone containing the apparatus, - a rear zone giving access to the active zone, - a forward zone independent of the two others and completely protected from which the remote-control of the apparatus is effected. The whole assembly has been designed so that each apparatus corresponding to an analytical technique is set up in a sealed enclosure. The sealed enclosures are interconnected by a conveyor. After three years operation, a critical review is now made of the installation. (authors) [French] L'installation a ete realisee pour effectuer des manipulations et des analyses chimiques sur des produits radioactifs. Elle est totalement telecommandee et se presente sous une forme lineaire de 15 metres de longueur et comporte trois zones: - une zone active d'appareillage, - une zone arriere d'intervention, - une zone avant independante des deux premieres et totalement protegee, ou s'operent les telecommandes de l'appareillage. L'ensemble a ete concu de facon a ce que chaque appareillage correspondant a une technique d'analyse soit implante dans une enceinte etanche. Les enceintes etanches sont reliees entre elles par un convoyeur. Apres trois annees de fonctionnement nous faisons le bilan et les critiques de l'installation. (auteurs)

  6. Better utilisation of district heating systems. Subproject Hanover-Hamburg: 'Analysis of the control characteristics of district heating grids'. Part 1: Optimisation of automatic pump control for fast load variations. Part 2: Automation of district heating pumps at the man-machine communication interface. Part 3: Installation and adaptation of the BoFiT program system (Hanover only). Final report; Bessere Ausnutzung von Fernwaermeanlagen. Teilprojekt Hannover-Hamburg: 'Analyse des Regelverhaltens von Fernwaermenetzen'. T. 1: Optimieren einer automatischen Pumpensteuerung auf schnelle Lastwechsel. T. 2: Darstellen der Automatisierungseinrichtungen von Fernwaermepumpen an der Mensch-Maschine-Kommunikationsschnittstelle (MMK). T. 3: Installation und Anpassung des Programmsystems BoFiT (nur Hannover). Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Tuchs, M.; Beecken, J.; Hilmer, W.; Oel, M.; Schaper, H.; Micus, W.; Tegeler, C.; Ridder, M.; Schoettker, P.; Rogalla, B.U.; Feuerriegel, S.

    2000-07-01

    The general target of the interconnection research intention is discovering margins for optimizing the heat consumption by fast and ensured variation between producers with CHP generation plants and plants for primary heat and reverse. The project is subdivided in three parts: In part 1 the usefulness of automated operation of the communal distributed heating net-work was determined by: Comparison of real measurements with simulated processes calculations of the differential control processes, development and analysis of a control process concept and improvement of the existing controler action in the Hamburg and the Hannover model, investigations of the effects of closed loop control on safety and portrayal of the processes during optimised and automated operation. The advantage of this system can be demonstrated to be both economical and ecological. Safety analysis showed that a higher degree of automation does not compromise safe operation. In Hamburg these findings led to the development of a training simulator for the operating personnel. The optimisation techniques presented in part 1 can therefore be implemented in a model, which provides a very good analogy to the real network. In part 2 innovative forms of presentation of hydraulic relations of the controled District Heating network where developed. They where realised in a computer program. This program was installed in the District Heating control room. The target of part 3 is the practical application of BoFit for the generation of optimized propositions for operation mode of the District Heating net-work. The consideration of the actual condition of the District Heating network was realized by online-connection to the process data processing. The situation of costs of heat supply is found out by simulations for the present moment and for a prognosted period. (orig.)

  7. LightLeaves: computer controlled kinetic reflection hologram installation and a brief discussion of earlier work

    International Nuclear Information System (INIS)

    Connors Chen, Betsy

    2013-01-01

    LightLeaves is an installation combining leaf shaped, white light reflection holograms of landscape images with a special kinetic lighting device that houses a lamp and moving leaf shaped masks. The masks are controlled by an Arduino microcontroller and servomotors that position the masks in front of the illumination source of the holograms. The work is the most recent in a long series of landscapes that combine multi-hologram installations with computer controlled devices that play with the motion of the holograms, the light, sound or other elements in the work. LightLeaves was first exhibited at the Peabody Essex Museum in Salem, Massachusetts in a show titled E ye Spy: Playing with Perception .

  8. LightLeaves: computer controlled kinetic reflection hologram installation and a brief discussion of earlier work

    Energy Technology Data Exchange (ETDEWEB)

    Connors Chen, Betsy, E-mail: acmeholo@gmail.com [ACME Holography, Somerville, Massachusetts USA 02144 (United States)

    2013-02-22

    LightLeaves is an installation combining leaf shaped, white light reflection holograms of landscape images with a special kinetic lighting device that houses a lamp and moving leaf shaped masks. The masks are controlled by an Arduino microcontroller and servomotors that position the masks in front of the illumination source of the holograms. The work is the most recent in a long series of landscapes that combine multi-hologram installations with computer controlled devices that play with the motion of the holograms, the light, sound or other elements in the work. LightLeaves was first exhibited at the Peabody Essex Museum in Salem, Massachusetts in a show titled {sup E}ye Spy: Playing with Perception{sup .}.

  9. The calibration procedure of the radiation monitoring system installed in radiation controlled area of KOMAC

    Energy Technology Data Exchange (ETDEWEB)

    Park, Sung-Kyun; Min, Yi-Sub; Park, Jeong-Min; Cho, Yong-Sub [Korea Atomic Energy Research Institute, Gyeongju (Korea, Republic of)

    2016-10-15

    The spaces, where these accelerators are installed, are defined as the radiation controlled area and the levels of the radiation in this area are monitored by the radiation monitoring system (RMS) to protect radiation workers and experiment users from the hazards of the ionizing radiation and the surface and air contamination tests are carried out periodically by the radiation secure team. The most of RMS instruments are installed in the accelerator building, where the 100-MeV proton linear accelerator is installed. All detectors of RMS should be calibrated every year to prove the reliability of RMS and almost all instruments for RMS was calibrated during this summer maintenance period of KOMAC this year. Almost all RMS instruments installed in KOMAC is calibrated between 2016-07-13 and 2016-08-24. As the calibration result, if the current reading value are within the 5% of the reference dose rate value, this RMS instrument can be used one more year. Otherwise, the detector of that RMS instrument should be repaired or replaced. The self-calibration certificate for each RMS instrument will be published only for the instrument to satisfy the condition.

  10. Functioning strategy study on control systems of large physical installations used with a digital computer

    International Nuclear Information System (INIS)

    Bel'man, L.B.; Lavrikov, S.A.; Lenskij, O.D.

    1975-01-01

    A criterion to evaluate the efficiency of a control system functioning of large physical installations by means of a control computer. The criteria are the object utilization factor and computer load factor. Different strategies of control system functioning are described, and their comparative analysis is made. A choice of such important parameters as sampling time and parameter correction time is made. A single factor to evaluate the system functioning efficiency is introduced and its dependence on the sampling interval value is given. Using diagrams attached, it is easy to find the optimum value of the sampling interval and the corresponding maximum value of the single efficiency factor proposed

  11. Regionally differentiated air pollution control regulations in the installation-related emission control law of the Federal Republic of Germany

    International Nuclear Information System (INIS)

    Buettner, T.W.

    1992-01-01

    The volume treats an issue from the boundary zone between environmental law and environmental economics, namely the regionalization of air pollution control standards in installation-related emission control law. In order to examine the question of whether this proposal, which originates in the field of environmental economics, can be adopted and is purposeful, the author initially performs a complete inventorization of applicable norms, this covering emission control law, the law of regional planning, and the provisions of international law. This status quo is then reviewed using conformity and optimization criteria developed by the political sciences. The assessment comes to the conclusion that the introduction of regionally differentiated air pollution control standards is not desirable. The author further submits proposals for the streamlining of the law of installation-related air pollution control in the Federal Republic of Germany. (orig.) [de

  12. Experience in the installation of a microprocessor system for controlling converter units of the Vyborg substation

    International Nuclear Information System (INIS)

    Gusakovskii, K. B.; Zmaznov, E. Yu.; Katantsev, S. V.; Mazurenko, A. K.; Mestergazi, V. A.; Prochan, G. G.; Funtikova, S. F.

    2006-01-01

    The experience in the installation of modern digital systems for controlling converter units at the Vyborg converter substation on the basis of advanced microprocessor devices is considered. It is shown that debugging of a control and protection system on mathematical and physical models does not guarantee optimum control of actual converter devices. Examples of advancing the control and protection system are described, the necessity for which has become obvious in tests of actual equipment. Comparison of oscillograms of processes before optimization of the control system and after its optimization and adjustment shows that the digital control system makes it possible to improve substantially the algorithms of control and protection in the short term and without changing the hardware component

  13. Status of safety at Areva group facilities. 2007 annual report; Areva, etat de surete des installations nucleaires. Rapport annuel 2007

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    This report describes the status of nuclear safety and radiation protection in the facilities of the AREVA group and gives information on radiation protection in the service operations, as observed through the inspection programs and analyses carried out by the General Inspectorate in 2007. Having been submitted to the group's Supervisory Board, this report is sent to the bodies representing the personnel. Content: 1 - A look back at 2007 by the AREVA General Inspector: Visible progress in 2007, Implementation of the Nuclear Safety Charter, Notable events; 2 - Status of nuclear safety and radiation protection in the nuclear facilities and service operations: Personnel radiation protection, Event tracking, Service operations, Criticality control, Radioactive waste and effluent management; 3 - Performance improvement actions; 4 - Description of the General Inspectorate; 5 - Glossary.

  14. Installing Omeka

    Directory of Open Access Journals (Sweden)

    Jonathan Reeve

    2016-07-01

    Full Text Available Omeka.net is a useful service for Omeka beginners, but there are a few reasons why you might want to install your own copy of Omeka. Reasons include: * Upgrades. By installing Omeka yourself, you can use the latest versions of Omeka as soon as they’re released, without having to wait for Omeka.net to upgrade their system. * Plugins and themes. You can install any plugin or theme you want, without being restricted to those provided by Omeka.net. * Customizations. You can buy a custom domain name, and customize your code to achieve your desired functionality. * Control. You have control over your own backups, and you can update the server yourself so that its security is always up-to-date. * Price. There are many low-cost Virtual Private Servers (VPSs now, some of which cost only $5 per month. * Storage. Many shared hosting providers now offer unlimited storage. This is useful if you have a large media library. In this tutorial, we’ll be entering a few commands on the command line. This tutorial assumes no prior knowledge of the command line, but if you want a concise primer, consult the Programming Historian introduction to BASH. There are other ways of installing Omeka, of course, some using exclusively GUI tools. Some hosting providers even offer “one-click installs” via their control panels. Many of those methods, however, will install older versions of Omeka which are then harder to upgrade and maintain. The method outlined below may not be the easiest way to install Omeka, but it will give you some good practice with using the command line, which is a skill that will be useful if you want to manually upgrade your install, or manually install other web frameworks. (For example, this installation method is very similar to WordPress’s “Five-Minute Install”. There are four steps to this process, and it should take about an hour.

  15. Data acquisition and control system in a heavy water detritiation installation

    International Nuclear Information System (INIS)

    Stefan, Iuliana; Balteanu, Ovidiu; Retevoi, Carmen; Stefan, Liviu

    2002-01-01

    The experimental installation for extracting tritium and deuterium from the tritiated heavy water used as moderator in CANDU type nuclear reactors is described. The separated tritium of high purity can be used in the fusion reactors of the future or in various laboratory researches. The fluids implied in operating this installation require special safety measures to be taken to protect both the operational personnel and the environment. Accordingly, in the technologic room no personnel is allowed and hence parameter monitoring, analyses and the testing must be done by remote control equipment. The computers for monitoring, warning and testing, as well as the sensors are housed in the data acquisition room, separated from the control room. The values generated by the process variables are converted in electrical or pneumatic signals and subsequently transmitted to the subsystems of monitoring, control and protection. Data acquisition in the control room is ensured by a computer provided with a FieldPoint interface. So, the connection between I/O modules from the data acquisition room and the computer ensures a 115.2 kb/s speed. Measured values of the parameters are recorded and displayed in the control room. Here these are compared with preset limits of the process parameters and in case of abnormal behavior, an alarm is triggered both optically and acoustically. At the same time, the program which controls the inputs and the outputs makes decisions and issues corrective or preventive commands for the technological process or installation protection, respectively. A diagram illustrating the monitoring, using a LabView platform is presented

  16. Design, manufacture and installation of measuring and control equipments for the advanced thermal prototype reactor 'Fugen'

    International Nuclear Information System (INIS)

    Hirota, Shigeo; Kawabata, Yoshinori

    1979-01-01

    The advanced thermal prototype reactor ''Fugen'' attained the criticality on March 20, 1978, and 100% output operation on November 13, 1978. On March 20, 1979, it passed the final inspection, and since then, it has continued the smooth operation up to now. The measuring and control equipments are provided for grasping the operational conditions of the plant and operating it safely and efficiently. At the time of designing, manufacturing and installing the measuring and control equipments for Fugen, it was required to clarify the requirements of the plant design, to secure the sufficient functions, and to improve the operational process, maintainability and the reliability and accuracy of the equipments. Many design guidelines and criteria were decided in order to coordinate the conditions among five manufacturers and give the unified state as one plant. The outline of the instrumentations for neutrons, radiation monitoring and process data, the control systems for reactivity, reactor output, pressure and water supply, the safety protection system, and the process computer are described. Finally, the installations and tests of the measuring and control equipments are explained. The aseismatic capability of the equipments was confirmed. (Kako, I.)

  17. Regulations concerning the cooking installations using the natural gas in the bakeries and the cake shops of the shopping Centers; Reglementation des installations de cuisson au gaz naturel en boulangerie-patisserie dans les centres commerciaux

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-05-01

    This brochure presents the regulation relative to the cooking installations using the natural gas in bakeries and cake shops of the shopping Centers. Following the general regulation context, the guide presents the ovens which can be installed and the associated technical restraints. The necessary conditions for the buildings, the gas alimentation, the natural gas pipelines in the buildings and the installations conditions are also presented. Finally the guide presents the maintenance facilities obligations. (A.L.B.)

  18. Installation of PMV Operation Program in DDC Controller and Air Conditioning Control Using PMV Directly as Set Point

    Science.gov (United States)

    Haramoto, Ken-Ichi

    In general, air conditioning control in a building is operated mainly by indoor air temperature control. Although the operators of the machine in the building accepted a claim for indoor air temperature presented by the building inhabitants, the indoor conditions have been often too cool or warm. Therefore, in an attempt to create better thermal environments, the author paid attention to the PMV that is a thermal comfort index. And then, the possibility of air conditioning control using the PMV directly as the set point was verified by employing actual equipment in an air conditioning testing room and an office building. Prior to the execution of this control, the operation program of the PMV was installed in a DDC controller for the air conditioning control. And information from indoor sensors and so on was inputted to the controller, and the computed PMV was used as the feedback variable.

  19. Controle optique de qubits lies a des centres isoelectroniques d'azote dans le GaAs

    Science.gov (United States)

    Ethier-Majcher, Gabriel

    Le traitement de l'information quantique est un domaine de recherche actuellement en pleine effervescence car il laisse entrevoir une revolution dans notre facon de traiter et d'echanger de l'information. D'une part, l'ordinateur quantique promet de resoudre des problemes comme la factorisation d'un polynome de facon beaucoup plus efficace qu'un ordinateur classique. D'autre part, les communications quantiques promettent l'echange d'information de facon fondamentalement inviolable. Afin de tirer pleinement profit de ces nouvelles technologies, il sera avantageux de construire des reseaux quantiques. Dans un tel reseau, des processeurs quantiques, les noeuds, seront connectes par des photons voyageant dans des fibres optiques. Les reseaux quantiques permettront de deployer les communications quantiques a grande echelle et de creer des super-ordinateurs quantiques. La realisation de reseaux quantiques necessitera des interfaces optiques pouvant echanger l'information de facon coherente entre un qubit (bit d'information quantique) et un photon. L'implementation de telles interfaces dans un systeme physique s'avere un important defi scientifique et technologique. Or, les systemes actuellement envisages a cette fin souffrent d'un faible couplage avec la lumiere ou encore de grandes inhomogeneites, constituant des obstacles a la realisation de reseaux a grande echelle. Dans cette these, le potentiel des centres isoelectroniques pour realiser des interfaces optiques est evalue. Deux types de qubits lies a des paires d'azote dans le GaAs sont consideres : les qubits excitoniques et les qubits de spin electronique, controlables par l'intermediaire d'excitons charges. Le controle optique complet des qubits excitoniques est demontre, ce qui constitue la premiere realisation du genre dans les centres isoelectroniques. L'observation d'excitons charges dans ce systeme, liant a la fois des trous lourds et des trous legers, laisse entrevoir de nouvelles possibilites afin de

  20. Risk Control of Offshore Installations. A Framework for the Establishment of Risk Indicators

    Energy Technology Data Exchange (ETDEWEB)

    Oeien, Knut

    2001-07-01

    Currently quantitative risk assessments are carried out to analyze the risk level of offshore installations and to evaluate whether or not the risk level is acceptable. By way of the quantitative risk analysis the risk status of a given installation is obtained. However, the risk status is obtained so infrequently that it is inadequate for risk control. It can be compared to economic control having the economic status presented about each fifth year, which is obviously inadequate. It is important to know the risk status because this may provide an early warning about the need for remedial actions. Without frequent information about the risk status, control of risk cannot be claimed. The main objective of this thesis has been the development of a framework for the establishment of risk indicators. These risk indicators provide a status of the risk level through measuring of changes in technical, operational and organizational factors important to risk, and is thus a means to control risk during operation of offshore petroleum installations. The framework consists of a technical methodology using the quantitative risk assessment as a basis, an organizational model, and an organizational quantification methodology. Technical risk indicators are established from the technical methodology covering the risk factors explicitly included in the quantitative risk assessment. Organizational risk indicators measure changes in the organizational risk factors included in the organizational model, but not included in the quantitative risk assessment. The organizational model is an extension to the risk model in the quantitative risk assessment. The organizational quantification methodology calculates the effect of the changes measured by the organizational risk indicators. The organizational model may also be applied as a qualitative tool for root cause analysis of incidents (process leaks). Other results are an intermediate-level expert judgment procedure applicable for

  1. Review of the seismic risk in the design of civil engineering of nuclear installations excepted the long term storage of radioactive wastes; Prise en compte du risque sismique a la conception des ouvrages de genie civil d'installations nucleaires de base a l'exception des stockages a long terme des dechets radioactifs

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    This guide aims to define, for the nuclear installations excepted the long term storage of radioactive wastes, from site data, the design specifications of earthquake resistant civil engineering and the possible methods for: the determination of the seismic response of the buildings, taking into account the interactions with the materials and the evaluation of the associated strains to size the installation; the determination of seismic displacements to be considered to size the materials. (A.L.B.)

  2. Application d'une équation d'état à la simulation du comportement thermodynamique des fluides dans les gisements et dans les installations de surface Application of an Equation of State to Simulating the Thermodynamic Behaviour of Fluids in Reservoirs and Surface Installations

    Directory of Open Access Journals (Sweden)

    Jain C.

    2006-11-01

    Full Text Available La connaissance des propriétés thermodynamiques des fluides pétroliers, en particulier des masses volumiques et des coefficients d'équilibre liquide-vapeur, intervient à divers stades de la production : primaire, secondaire par in-jection de gaz (C02 ou hydrocarbures miscibles, vapeur d'eau, séparation, réseau de collecte et de transport. L'ampleur du domaine de pression et de température à l'intérieur duquel on a besoin de connaître les propriétés des huiles et des gaz à condensat, et le fait que la compo-sition d'ensemble des mélanges diphasiques ne cesse de varier au cours de leur déplacement soit dans les gisements, soit dans les installations d'exploitation, rendent mani-feste l'intérêt de pouvoir calculer ces propriétés, en évi-tant d'avoir recours à des travaux de laboratoire beaucoup trop importants. Pour résoudre ces problèmes, une nouvelle équation d'état appelée Redlich-Kwong Développée (RKD a été mise au point. Au cours de cet exposé, nous verrons que cette équation restitue les enveloppes diphasiques de l'équilibre liquide-vapeur avec une qualité au moins égale à celles des méthodes de Soave et de Peng-Robinson qui jouissent actuellement d'une grande notoriété. L'avantage de ce modèle sur ces dernières méthodes est l'évaluation simultanée des propriétés volumétriques des phases en présence avec une bonne précision, ce qui est d'une grande utilité pour l'application de ce modèle aux problèmes industriels. Knowing the thermodynamic properties of petroleum fluids, and in particular the density and liquid-vapor equilibrium coefficients, is important at different stages of production, i. e. primary production, secondary production by gas flooding (CO2 or miscible hydrocarbons, steam, separation, gathering network and transportation. The pressure and temperature range within which the oil and gas-condensate properties must be known coupled with the fact that the overall composition of

  3. Nuclear Materials Management in a Recovery Facility for Unirradiated Enriched Uranium; Gestion des Matieres Nucleaires dans une Installation de Recuperation d'Uranium Enrichi Non Irradie; Administrativno-khozyajstvennyj uchet yadernykh materialov na ustanovke po regeneratsii neobluchennogo obogashchennogo urana; Administracion de Materiales Nucleares en una Planta de Recuperacion para Uranio Enriquecido No Irradiado

    Energy Technology Data Exchange (ETDEWEB)

    Jasny, G. R. [Union Carbide Corporation, Oak Ridge, TN (United States)

    1966-02-15

    measurements. Statistical analysis is used extensively in connection with the control of measurements and to minimize the number of chemical analyses. However, the application of statistics to the evaluation of inventory discrepancies has not been successful. This paper will discuss the details of the material control techniques which have been listed and some of the problems associated with them. (author) [French] L'usine Y-12 exploitee par la Commission de l'energie atomique a Oak Ridge, Tennessee, procede depuis plus de 20 ans au traitement et a la recuperation d'uranium enrichi non irradie se presentant sous diverses formes. A l'heure actuelle, les installations de recuperation d'Y-12 executent une serie d'operations distinctes en chaine semi-continue, par exemple, dissolution, combustion, evaporation, extraction, denitrification et hydrofluoration. Les installations de traitement et de stockage ont une geometrie restreinte et leur capacite globale est de plusieurs centaines de kilogrammes d'uranium enrichi par mois. L'uranium entrant provient de l'usine elle-meme ainsi que d'autres installations de la Commission de l'energie atomique, situees aux Etats-Unis. Depuis sa creation, l'usine Y-12 a recu pratiquement toutes les sortes de dechets d'uranium enrichi non irradie. Le controle des operations est assure a l'aide des methodes suivantes: 1. Utilisation du materiel concu de maniere a faciliter le nettoyage et l'echantillonnage ainsi qu'a reduire au minimum le 'piegeage ' de matieres; 2. Controle permanent de tous les rebuts et dechets liquides, en particulier des effluents evacues a l'egout ou dans l'atmosphere et des dechets contamines; 3. Inventaires periodiques des stocks; 4. Echantillonnages et analyses de toutes les matieres entrantes et sortantes; 5. Controle strict de la qualite des mesures analytiques et de l'echantillonnage; 6. Attribution de la responsabilite du controle des matieres au personnel charge des operations plutot qu'a des comptables; 7. Formation

  4. Installation and management of the SPS and LEP control system computers

    International Nuclear Information System (INIS)

    Bland, Alastair

    1994-01-01

    Control of the CERN SPS and LEP accelerators and service equipment on the two CERN main sites is performed via workstations, file servers, Process Control Assemblies (PCAs) and Device Stub Controllers (DSCs). This paper describes the methods and tools that have been developed to manage the file servers, PCAs and DSCs since the LEP startup in 1989. There are five operational DECstation 5000s used as file servers and boot servers for the PCAs and DSCs. The PCAs consist of 90 SCO Xenix 386 PCs, 40 LynxOS 486 PCs and more than 40 older NORD 100s. The DSCs consist of 90 OS-968030 VME crates and 10 LynxOS 68030 VME crates. In addition there are over 100 development systems. The controls group is responsible for installing the computers, starting all the user processes and ensuring that the computers and the processes run correctly. The operators in the SPS/LEP control room and the Services control room have a Motif-based X window program which gives them, in real time, the state of all the computers and allows them to solve problems or reboot them. ((orig.))

  5. Apparatus for installing and removing a control rod drive in a nuclear reactor

    International Nuclear Information System (INIS)

    Turner, A.P.L.; Ward, R.

    1989-01-01

    This patent describes an apparatus for installing and removing a control rod drive from beneath the pressure vessel of a nuclear reactor. It consists of elevator carriage for carrying the control rod drive into and out of the region beneath the pressure vessel in a generally horizontal position, an elevator cradle mounted on the carriage for pivotal movement about an axis between horizontal and vertical positions and for vertical movement, when in the vertical position, means for securing the control rod drive to the elevator cradle, and a winch cart movable horizontally between a first position spaced from the pivot axis and a second position near the pivot axis. The cart has a winch cable supporting the lower end of the elevator carriage for moving the elevator carriage and the control rod drive between horizontal and vertical positions on the elevator carriage when the cart is spaced from the pivot axis and for raising and lowering the elevator cradle and the control rod drive when the cart is positioned near the pivot axis. The control rod drive is mounted on the elevator cradle by a bearing permitting rotational and horizontal movement of the control rod drive when the drive is in a vertical position, a swing arm, a pneumatically actuated cylinder in axial alignment with the control rod drive for raising and lowering the control rod drive, and means pivotally mounting the cylinder on the swing arm for movement about an axis spaced from and generally parallel to the vertically extending axis so that the position of the cylinder and the control rod drive can be shifted horizontally about the vertically extending axes

  6. Nuclear installations safety and protection: thirty years of researches on earthquakes at the IRSN; Surete et protection des installations nucleaires: trente ans de recherches a l'IRSN sur les seismes

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-03-01

    Every years more than one hundred earthquakes occur in France. Taking into account this risk is essential for the safety of nuclear installations. In this context the IRSN develops research programs on earthquakes and realizes evolutions of safety procedures. This paper presents three sheets of researches realized by the IRSN on earthquakes risk assessment in the nuclear installations design and exploitation and the example of the Saint-Die earthquake. (A.L.B.)

  7. Can administrative referenda be an instrument of control over large-scale technical installations?

    International Nuclear Information System (INIS)

    Rossnagel, A.

    1986-01-01

    An administrative referendum offers the possibility of direct participation of the citizens in decisions concerning large-scale technical installations. The article investigates the legal status of such a referendum on the basis of constitutional and democratic principles. The conclusion drawn is that any attempt to realize more direct democracy in a concrete field of jurisdiction of the state will meet with very large difficulties. On the other hand, the author clearly states more direct democracy for control over the establishment of large-scale technology to be sensible in terms of politics and principles of democracy, and possible within the constitutional system. Developments towards more direct democracy would mean an enhancement of representative democracy and would be adequate vis a vis the problems posed by large-scale technology. (HSCH) [de

  8. Changes in radiological protection and quality control in Spanish dental installations: 1996-2003.

    Science.gov (United States)

    Alcaraz-Baños, Miguel; Parra-Pérez, María del Carmen; Armero-Barranco, David; Velasco-Hidalgo, Francisco; Velasco-Hidalgo, Esteban

    2009-10-01

    The European Union has established specific directives concerning radiological protection which are obligatory for member States. In addition, all Spanish dental clinics with radiological equipment are required to have an annual quality control check. To analyze the effect of new European legislation on dental radiological practice in Spain and to determine whether it has resulted in lower doses being administered to patients. A total of 10,171 official radiological quality control reports on Spanish dental clinics, covering 16 autonomous regions, were studied following the passing of Royal Decree 2071/1995 on quality criteria in radiodiagnostic installations. The reports, compiled by U.T.P.R Asigma S.A., a company authorised by the Nuclear Safety Council, cover the years 1996 to 2003, which has enabled us to monitor the evolution of radiological procedures in dental clinics over a seven year period. According to the reports for 2003, 77.3 % of clinics complied with EU requirements, using equipment of 70 kVp, 8 mA, 1.5 mm Al filters, with a collimator length of 20 cm. However, non-compliance was detected in approximately a third (30.8%) of the equipment inspected: alterations in the kilovoltage used, exposure time, performance of the tubing, dosage, linearity/intensity of current and acoustic-luminous signal 6.86%. The mean skin dose reached 3.11 mGy for patients who received an x-ray of an upper molar, representing a decrease of 18% over the seven years studied. there has obviously been a general improvement in the parameters studied, but only 77.3% of the installations complied fully with official EU regulations concerning dental radiological protection.

  9. The processing and management of wastes from atomic reactors; Nouvelles installations industrielles du C.E.A. pour le traitement des dechets radioactifs liquides et solides

    Energy Technology Data Exchange (ETDEWEB)

    Cerre, P; Mestre, E; Bourdrez, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    The policy concerning radioactive wastes studied by all Atomic Centres has led to various procedures which, while apparently numerous, come under a few standard headings. Whether the wastes are in the liquid or solid state their management depends on their physical and chemical nature. The procedure adopted is governed by three general principles: - determination of the most economical means possible of storage and processing by volume reduction; - conversion to a solid compact form; - complete acceptance of the accepted standards at all places and all times. In this communication all the standard solutions adopted and used by the various Centres of the Commissariat a l'Energie Atomique will be examined bearing in mind the preceding remarks. Particular mention will be made of the following: - For liquids, physical, chemical and physico-chemical processing - For solids, decontamination, volume reduction and long-term conditioning techniques. The different procedures for collecting and storing solid wastes before and after processing are also discussed. The paper ends with a brief review of the studies, both technical and economic, being pursued on this subject. (authors) [French] La gestion des dechets etudies par tous les Centres Atomiques a donne lieu a des solutions qui - bien que nombreuses en apparence - se ramenent a quelques solutions types, peu nombreuses. Qu'il s'agisse de dechets solides ou liquides, la nature physique et chimique des dechets conditionne leur mode de gestion. Celle-ci procede de trois principes generaux: - recherche du mode de stockage et de traitement aussi economique que possible par reduction de volume; - mise sous forme compacte solide; - garantie du respect des normes en tous lieux et en tous temps. Dans cette communication, nous examinons toutes les solutions types, compte tenu des remarques precedentes, qui ont ete adoptees et sont utilisees par les differents Centres du Commissariat a l'Energie Atomique. Nous rappelons en

  10. Control Rod Drive Mechanism Installed in the Internal of Reactor Pressure Vessel

    Energy Technology Data Exchange (ETDEWEB)

    Choi, M. H.; Choi, S.; Park, J. S.; Lee, J. S.; Kim, D. O.; Hur, N. S.; Hur, H.; Yu, J. Y

    2008-09-15

    This report describes the review results and important technologies related to the in-vessel type control rod drive mechanism. Generally, most of the CRDMs used in the PWR are attached outside of the reactor pressure vessel, and the pernetration of the vessel head can not avoid. However, in-vessel type CRDMs, which are installed inside the reactor vessel, can eliminate the possibility of rod ejection accidents and the penetration of the vessel head, and provide a compact design of the reactor vessel and containment. There are two kinds of in-vessel type CRDM concerning the driving force-driven by a driving motor and by a hydraulic force. Motor driven CRDMs have been mainly investigated in Japan(MRX, IMR, DRX, next generation BWR etc.), and developed the key components such as a canned motor, an integrated rod position indicator, a separating ball-nut and a ball bearing that can operate under the water conditions of a high temperature and pressure. The concept of hydraulically driven CRDMs have been first reported by KWU and Siemens for KWU 200 reactor, and Argentina(CAREM) and China(NHR-5, NHR-200) have been developed the internal CRDM with the piston and cylinder of slightly different geometries. These systems are driven by the hydraulic force which is produced by pumps outside of the reactor vessel and transmitted through a pipe penetrating the reactor vessel, and needs complicated control and piping systems including pumps, valves and pipes etc.. IRIS has been recently decided the internal CRDMs as the reference design, and an analytical and experimental investigations of the hydraulic drive concept are performed by POLIMI in Italy. Also, a small French company, MP98 has been developed a new type of control rods, called 'liquid control rods', where reactivity is controlled by the movement of a liquid absorber in a manometer type device.

  11. Fire prevention in industrial installations presenting a risk for man and environment (ICPE); La prevention des incendies dans les ICPE: une exigence d'amelioration permanente

    Energy Technology Data Exchange (ETDEWEB)

    Moche, L. [Ministere de l' Amenagement du Territoire et de l' Environnement, Direction de la Prevention des Pollutions et des Risques, 75 - Paris (France)

    2000-09-01

    The most likely accident in industrial installations is fire. 59 out of 100 accidents reported in 1999 describe a fire outbreak, the fire is either the initiating cause of the accident or the form into which the event eventually evolves. This article briefly describes the why and the wherefore of French regulations on fire prevention in installations presenting a risk for man and environment. The French system is based on the responsibility of the plant operator and on the result of inspections performed by authorities to check the conformity of the installation with current regulations. (A.C.)

  12. A database system for the control of radioactive effluents generated by the IPEN-CNEN/SP installations

    International Nuclear Information System (INIS)

    Maduar, M.F.

    1992-01-01

    A PC-compatible database system has been developed in order to optimize the control of liquid and gaseous effluents generated by the installations of IPEN-CNEN/SP. The system implements source-term generation, optimizes the discharge control of the effluents and allows several ways for the retrieval of data concerning to the effluents. (author)

  13. Study and installation of concrete shielding in the civil engineering of nuclear construction (1960); Etude et mise en place des betons de protection dans le genie civil des ouvrages nucleaires (1960)

    Energy Technology Data Exchange (ETDEWEB)

    Dubois, F [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    The object of this report is to give technical information about high density concretes which have become very important for radiation biological shielding. The most generally used heavy aggregates (barytes, ilmenite, ferrophosphorus, limonite, magnetite and iron punching) to make these concretes are investigated from the point of view prospecting and physical and chemical characteristics. At first, a general survey of shielding concretes is made involving the study of components, mixing and placing methods, then, a detailed investigation of some high density concretes: barytes concrete, with incorporation of iron punching or iron shot, ferrophosphorus concrete, ilmenite concrete and magnetite concrete, more particularly with regard to grading and mix proportions and testing process. To put this survey in concrete form, two practical designs are described such as they have been carried out at the Saclay Nuclear Station. Specifications are given for diverse concretes and for making the proton-synchrotron 'Saturne' shielding blocks. (author) [French] Ce rapport a pour objet de donner des precisions techniques au sujet des betons a haute densite qui ont pris une grande importance pour la protection biologique contre les rayonnements. Les agregats lourds les plus couramment utilises (barytine, ilmenite, ferrophosphore, limonite, magnetite et riblons) pour la fabrication de ces betons, sont examines du point de vue prospection et caracteristiques physiques et chimiques. On procede d'abord a une etude generale des betons de protection comprenant l'etude des constituants, de la confection et de la mise en place, ensuite, a un examen detaille de quelques betons a haute densite: betons a base de barytine, avec incorporation de riblons ou de grenaille de fonte, betons au ferrophosphore, a base d'ilmenite ou de magnetite, notamment en ce qui concerne la granulometrie, la composition, le dosage et les processus d'essais. Pour concretiser ces etudes, deux applications pratiques

  14. Study and installation of concrete shielding in the civil engineering of nuclear construction (1960); Etude et mise en place des betons de protection dans le genie civil des ouvrages nucleaires (1960)

    Energy Technology Data Exchange (ETDEWEB)

    Dubois, F. [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    The object of this report is to give technical information about high density concretes which have become very important for radiation biological shielding. The most generally used heavy aggregates (barytes, ilmenite, ferrophosphorus, limonite, magnetite and iron punching) to make these concretes are investigated from the point of view prospecting and physical and chemical characteristics. At first, a general survey of shielding concretes is made involving the study of components, mixing and placing methods, then, a detailed investigation of some high density concretes: barytes concrete, with incorporation of iron punching or iron shot, ferrophosphorus concrete, ilmenite concrete and magnetite concrete, more particularly with regard to grading and mix proportions and testing process. To put this survey in concrete form, two practical designs are described such as they have been carried out at the Saclay Nuclear Station. Specifications are given for diverse concretes and for making the proton-synchrotron 'Saturne' shielding blocks. (author) [French] Ce rapport a pour objet de donner des precisions techniques au sujet des betons a haute densite qui ont pris une grande importance pour la protection biologique contre les rayonnements. Les agregats lourds les plus couramment utilises (barytine, ilmenite, ferrophosphore, limonite, magnetite et riblons) pour la fabrication de ces betons, sont examines du point de vue prospection et caracteristiques physiques et chimiques. On procede d'abord a une etude generale des betons de protection comprenant l'etude des constituants, de la confection et de la mise en place, ensuite, a un examen detaille de quelques betons a haute densite: betons a base de barytine, avec incorporation de riblons ou de grenaille de fonte, betons au ferrophosphore, a base d'ilmenite ou de magnetite, notamment en ce qui concerne la granulometrie, la composition, le dosage et les processus d'essais. Pour concretiser ces

  15. Recommendations for the lighting of sporting facilities. 5. edition; Recommandations relatives a l'eclairage des installations sportives. 5. edition

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-01-01

    Natural and artificial lighting is an important factor of comfort, pleasure and safety in sporting facilities and influences the construction costs but also the frequenting of installations. The duration of use of installations and the profitability of investments are directly linked with the prolongation of visiting hours for competition, training and leisure purposes. This book presents, first, the common recommendations and principles for the lighting of sporting facilities in general. The particular recommendations relative to some specific activities are considered in a second part (golf, ski, bowls, pelota, skate-board, hippodromes etc..). (J.S.)

  16. Invasive Species Guidebook for Department of Defense Installations in the Chesapeake Bay Watershed: Identification, Control, and Restoration

    Science.gov (United States)

    2007-11-01

    Crown vetch Coronilla varia MD, VA 14 Leafy spurge Euphorbia esula VA 15 Ground ivy Glechoma hederacea DC, MD, PA, VA, WV 17 Cogongrass Imperata ...INSTALLATIONS IN THE CHESAPEAKE BAY WATERSHED IDENTIFICATION AND CONTROL METHODS Cogongrass ( Imperata cylindrica) Description & Biology – A large

  17. Du désir d’île à l’installation, les circulations migratoires des Métropolitains à la Martinique

    Directory of Open Access Journals (Sweden)

    Michel Desse

    2008-09-01

    Full Text Available Le lien entre migration et Antilles françaises est souvent traité en termes d’émigration insulaire vers l’Hexagone. En effet, les flux les plus nombreux correspondent encore à ce mouvement centripète qui s’explique par une situation sociale tendue du fait de l’inadaptation entre l’offre de travail et les jeunes adultes en trop grand nombre. Pourtant les mobilités venant de Métropole existent avec le retour des Antillais au pays. Les Antilles attirent aussi les Métropolitains. La tertiairisation de l’économie, les investissements des grandes sociétés françaises ainsi que les dernières lois de défiscalisation ou celles concernant la création d’entreprises semblent favorisent le mouvement. L’article se propose d’analyser les moteurs de ces nouvelles formes de circulation migratoire entre la France métropolitaine et la Martinique, ainsi que l’insertion économique et les territorialités spécifiques des nouveaux acteurs.The migration-West Indies nexus is often dealt with in terms of insular emigration towards Metropolitan France. Indeed, most of the flows are still characterised by a centripetal move that can be accounted for by the hiatus between job supply and the demographic importance of the youth. Nonetheless, Metropolitan-origin mobility exist with West Indian return migration as well as Metropolitan French migration. The boom of the service economy, investments from large French firms and recent advantageous fiscal laws favour this pattern. The article seeks to analyse the new driving forces behind the circular movement between Metropolitan France and Martinique, as well as the economic insertion and the specific territorialities of the new actors.

  18. The inspection of (collective) tapwater installations in 2009. Progress report; De controle van collectieve leidingwaterinstallaties in 2009. Voortgang controletaak

    Energy Technology Data Exchange (ETDEWEB)

    Dik, H.H.J.

    2011-02-15

    For the first time since 2004, less newly build collective tap water installations show shortcomings. This is true for both the first inspection and the follow-up inspections preformed by the water companies. This seems to indicate a break in the trend of previous years where less newly build installations pass inspection without shortcomings. Still, one-third of the inspected installations do not comply with legionella regulations when first inspected. These non-compliances can be the cause of high to very high risk of contamination of the installation or the public mains system. These conclusions are drawn from the inspections preformed in 2009 by the drinking water companies in newly build and existing installations. By order of the Dutch Ministry of Infrastructure and the Environment and the VROM Inspectorate, the Institute for Public Health and the Environment of the Netherlands (RIVM) compile a yearly report since 2004 on the inspection of tap water installations. In 2009 more than 47.000 newly build and existing installations were inspected. The inspections have found and resolved more than 8000 situations of high to very high risk for public health. In existing installations, the number of non-compliance found at first inspections has decreased over the years. At the second inspection of installations that do not comply, the number of non-complying installations increases. The cause of this trend is unknown, and should be investigated. Only a quarter of the installations that must comply with special regulations for the prevention of Legionella (high-priority installations like hospitals, swimming pools, etc.) comply at first inspection. Starting from 2009, these installations are inspected according to a special intervention strategy. It is still too early to see results from this strategy. [Dutch] Voor het eerst sinds 2004 vertonen minder collectieve leidingwaterinstallaties in nieuwbouw gebreken. Dit geldt voor zowel de eerste (basis)controle als de

  19. Facilities for Waste Management at Chalk River, Canada; Les Installations d'Elimination et d'Utilisation des Dechets a Chalk River, Canada; 041e 0411 041e 0420 0423 0414 041e 0412 ; Instalaciones Utilizadas para el Provechamiento y Evacuacion de Desechos Radiactivos en Chalk River, Canada

    Energy Technology Data Exchange (ETDEWEB)

    Mawson, C. A.; Russell, A. E. [Environmental Research Branch, Atomic Energy of Canada Ltd. (Canada)

    1960-07-01

    The waste disposal areas used by the Atomic Energy of Canada Limited are situated in a rock basin filled with glacial till and sand, draining into the Ottawa River. Low-activity liquid effluent is run into pits in the sand, which are filled with small rocks to prevent contact of liquid with the air. Medium- level liquid is mixed with cement in drums which are stacked and totally enclosed in concrete trenches; medium-level solids are buried in concrete-lined trenches; high-level solids are placed in holes lined with steel or concrete piping. Special facilities are provided for organic liquids and bottled wastes. Details will be given of the structural work and procedures, with an outline of the results of environmental monitoring. (author) [French] Les zones d'elimination utilisees par l'Atomic Energy of Canada Limited sont situees dans un bassin rocheux, rempli de blocs erratiques et'de sable, dont les eaux s'ecoulent dans la riviere Ottawa. Les effluents liquides de faible activite sont verses dans des puits creuses dans le sable, qui sont ensuite remplis de petites pierres pour prevenir le contact du liquide avec l'air. Les dechets liquides d'activite moyenne sont melanges a du ciment dans des barils qui sont entasses et completement enfermes dans des tranchees betonnees; les dechets solides d'activite moyenne sont enfouis dans des tranchees bordees de beton; les dechets solides de haute activite sont places dans des trous bordes de conduites d'acier ou de ciment. Des installations speciales sont prevues pour les liquides organiques et les dechets enfermes dans des recipients en forme de bouteilles. Le memoire expose en detail les travaux d'amenagement et les methodes suivies; il donne un apercu des resultats du controle du milieu ambiant. (author) [Spanish] Las zonas utilizadas por la Atomic Energy of Canada Limited para la evacuacion de desechos radiactivos estan situadas en una cuenca rocosa recubierta de limo y arena del periodo glacial, que desemboca en el

  20. Demonstration of the 3D PANTHERE software for the simulation of gamma dose rates for complex nuclear installations; Demonstration du logiciel 3D panthere pour la simulation des debits de doses gamma pour installations nucleaires complexes

    Energy Technology Data Exchange (ETDEWEB)

    Longeot, M.; Dupont, B. [EDFISEPTENITE, 12-14 avenue Dutrievoz, 69628 Villeurbanne Cedex (France); Schumm, A.; Zweers, M. [EDF/R and D/SINETICS, 1 avenue du General de Gaulle, 92141 Clamart Cedex (France); Malvagi, F.; Trama, J.C. [CEA Saclay, SERMA, 91 - Gif-sur-Yvette (France)

    2010-07-01

    The authors present the two successive versions of the PANTHERE simulation software developed by EDF-SEPTEN to determine gamma dose flow rate in complex industrial installations. This software predicts dose rates and thus enables interventions in irradiating environment to be optimized. The authors report the demonstration of the industrial version (PANTHEREv1) and of the currently under development version (PANTHEREv2). They outline the evolutions brought to the first version to develop the second one such as the direct importation of CAD models, ergonomic improvements, etc.

  1. Manual on quality assurance for installation and commissioning of instrumentation, control and electrical equipment in nuclear power plants

    International Nuclear Information System (INIS)

    1989-01-01

    The present Manual on Quality Assurance (QA) for Installation and Commissioning of Instrumentation, Control and Electrical (ICE) Equipment of Nuclear Power Plants contains supporting material and illustrative examples for implementing basic requirements of the quality assurance programme in procurement, receiving, installation and commissioning of this equipment. The Manual on Quality Assurance for Installation and Commissioning of ICE Equipment is designed to supplement and be consistent with the Guidebook as well as with the IAEA Code and Safety Guides on Quality Assurance. It is intended for the use of managerial staff and QA personnel of nuclear power plant owners or the organizations respectively responsible for the legal, technical, administrative and financial aspects of a nuclear power plant. The information provided in the Manual will also be useful to the inspection staff of the regulatory organization in the planning and performance of regulatory inspections at nuclear power plants

  2. Durable Residual Wall Lining (DL) Installation Concepts and Acceptability as an IRS Replacement Tool for Malaria Vector Control

    DEFF Research Database (Denmark)

    Larsen, Marie Louise; Lenau, Torben Anker

    that will eliminate the need for repeated spraying of walls over a period of 3-4 years after installation. The objective of this project was to evaluate a variety of methods for attaching DL to various wall surfaces found in traditional, rural African housing. Assessments were made as to strength of attachment under...... various stresses and appearance after installation. The experiments took place in Anwona village near Obuasi, Ghana with the support and cooperation of AngloGold Ashanti’s Malaria Control Center. 55 mechanical and adhesive products were tested for their ability to hold a static load (simulating long...... observations were included in the DL Installation Manual, the final delivery of this project....

  3. Authorization procedure for the construction and operation of nuclear installations within the EC Member States, including supervision and control

    International Nuclear Information System (INIS)

    Amaducci, Sandro; Didier, J.M.

    1978-01-01

    This report is an updating of the report EUR 5284, Authorization procedure for the construction and operation of nuclear installations within the EEC Member States, prepared in 1974 by J.M. Didier and Associates. Recent developments regarding the authorization procedure for the construction and operation of nuclear installations have taken place in Italy (introduction of a site approval procedure) and in Denmark (adoption of an overall legislation on the subject, however not yet in force). With respect to supervision and control of nuclear installations during construction and operation, competences of, as well as their exercise by, supervisory authorities in all EC Member States, with the exception of Ireland, are also analysed in the current study

  4. Ventilation of radioactive enclosures; Ventilation des enceintes radioactives

    Energy Technology Data Exchange (ETDEWEB)

    Caminade, F; Laurent, H [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1957-07-01

    Mechanical, physical and chemical manipulations on radioactive products must be carried out in properly ventilated enclosed places. The air extracted can only be discharged into the atmosphere after a correct filtration. The power of the ventilation systems is a function of the dimensions and purpose of the enclosure? The choice of types of filter is determined by the physical state and chemical nature of the radioactive materials to be manipulated. This study deals with the individual equipment of small installations: glove boxes, manipulation boxes with outside control and, if necessary, production chambers (maximum useful volume: 5 m{sup 3}). The performances of three types of 'ventilators', and the modifications provided by the addition of filters, are measured and compared. (author) [French] Les manipulations oceaniques, physiques et chimiques sur des produits radioactifs doivent s'effectuer dans des enceintes convenablement ventilees. L'air extrait ne peut etre rejete dans l'atmosphere qu'apres une filtration correcte. La puissance des installations de ventilation est fonction des dimensions de l'enceinte et de son utilisation. Le choix des types de filtres est determine par l'etat physique et la nature ehimique des corps radioactifs manipules. Notre etude porte sur l'equipement individuel d'installations de petites dimensions: boites a gants, boites a pinces et, a la rigueur, enceintes de production (volume maximum utilisable 5 m{sup 3}). Nous mesurons et comparons les performances de trois types de 'ventilateurs' et les modifications apportees par l'adjonction de filtres. (auteur)

  5. Risk Analysis of Flare Flame-out Condition in a Gas Process Facility Analyse des risques des conditions d’extinction de torche au sein d’une installation de traitement de gaz

    Directory of Open Access Journals (Sweden)

    Zadakbar O.

    2011-02-01

    Full Text Available Flaring is a common method of disposal of flammable waste gases in the downstream industries. Flare flame out (flame lift-off or blow-outs often occurs causing toxic vapors to discharge. The toxic gases released may have hazardous effects on the surrounding environment. To study the effect of inhalation exposure of these toxic gases on human health, the four steps of the EPA (Environmental Protection Agency framework with the field data to quantify the cancer and non-cancer health risks are integrated in this paper. As a part of exposure assessment, gas dispersion modeling using AERMOD and UDM-PHAST is applied in two different conditions of normal flaring and flare flame out during a particular climate condition in Khangiran region. Recommendations to avoid flare flame out conditions are also presented here. Le torchage est un procédé courant d’élimination des gaz résiduaires inflammables dans les industries de traitement. L’extinction de la torche (par décollage ou soufflage de flamme provoque souvent une émission de vapeurs toxiques. Ces gaz toxiques libérés peuvent présenter des effets dangereux sur le milieu environnant. Pour étudier l’effet d’une exposition par inhalation de ces gaz toxiques sur la santé, cet article croise les quatre étapes de la démarche de l’EPA (Environmental Protection Agency, Agence de protection de l’environnement avec les données d’exploitation afin de quantifier le risque sanitaire cancérologique et non cancérologique. Dans le cadre de l’estimation d’exposition, une modélisation de dispersion des gaz utilisant AERMOD et UDM-PHAST est évaluée dans deux configurations différentes de torchage normal et d’extinction de torche à l’occasion de conditions climatiques particulières dans la région du Khangiran. L’article propose également des recommandations destinées à éviter les conditions d’une extinction de flamme de torche.

  6. Recent research on the pharmaceutical checking of radioelements (1961); Etudes recentes sur le controle pharmaceutique des radioelements (1961)

    Energy Technology Data Exchange (ETDEWEB)

    Cohen, Y; Ingrand, J [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    Checking on radioactive preparations for medical use is complicated by difficulties due to the radioactivity, the instability and the methods of using these solutions. In effect it is necessary, in order to draw up a practicable set of rules governing such checks, to know both the method of preparation and the properties of the radioelement, as well as special and often contradictory features of its use. These tests fall into three categories: physical, chemical and biological. Preparations of chromium 51, iron 59 and arsenic 76 have been dealt with in recent studies. In each case special tests were necessary, and these will be described in this paper. The practice of these tests is of twofold interest: firstly they provide a maximum guarantee to the user, and secondly they guide the chemist in his manipulations, immediately and thoroughly. (author) [French] Le controle des preparations radioactives a usage medical est complexe par suite des difficultees dues a la radioactivite, a l'instabilite et aux modalites d'utilisation de ces solutions. En effet, l'etablissement justifie d'un protocole de controle necessite la connaissance aussi bien du mode de preparation, que des proprietes du radioelement et des particularites parfois contradictoires de son emploi. Ces controles sont de trois ordres physiques, chimiques, biologiques. Des etudes recentes ont porte sur des preparations de chrome 51, de fer 59, d'arsenic 76. Dans chaque cas, il est apparu necessaire de pratiquer des controles particuliers qui seront exposes dans la communication. La pratique de ces derniers presente un double interet; d'une part, ils assurent a l'utilisateur un maximum de garantie, d'autre part, ils orientent le chimiste dans ses mises au point, immediatement et de facon approfondie. (auteur)

  7. Wind power installations in Switzerland - Guidelines for the analysis of environmental impact; Eoliennes en Suisse. Guide pour l'analyse des effets sur l'environnement

    Energy Technology Data Exchange (ETDEWEB)

    Ott, W.; Kaufmann, Y.; Steiner, P. [Econcept AG, Zuerich (Switzerland); Gilgen, K.; Sartoris, A. [IRAP-HSR, Institut fuer Raumentwicklung an der Hochschule fuer Technik Rapperswil, Rapperswil (Switzerland)

    2008-07-01

    This report published by the Swiss Federal Office of Energy (SFOE) provides guidelines concerning the impact of the construction of wind-energy installations on the environment in Switzerland. The report aims to ascertain the relevant environmental aspects of the construction of such wind turbines. If no relevant restrictions apply, the acceptance of such wind power installations is said to increase. The guidelines also recommend a standardised course of action and provide sources of information for investors that are necessary for successful planning. The results which can be obtained by using these guidelines can be used to compile a short-form report for cantonal environment protection agencies. An appendix contains an example of the structure of such a report.

  8. Caractérisation de la perméabilité des couches constituant la barrière passive des installations de stockage de déchets non dangereux Permeability characterization of the geological barrier of non dangerous landfill sites

    Directory of Open Access Journals (Sweden)

    Mouthier B.

    2012-09-01

    Full Text Available Pour obtenir son autorisation d’exploiter, une Installation de Stockage de Déchets Non Dangereux (ISDND doit justifier réglementairement sa favorabilité géologique. Le « Guide de bonnes pratiques pour les reconnaissances géologiques » de l’AFNOR fournit les critères d’aptitude du site à recevoir une ISDND et les moyens à mettre en œuvre, dont ceux qui concernent la perméabilité des couches géologiques qui protègent le milieu naturel. La mesure de la perméabilité in situ, en forage, des matériaux peu à très peu perméables des deux couches de la barrière de sécurité passive, est une opération délicate qui nécessite une mise en œuvre soignée respectant les normes appropriées, choisies en fonction des gammes de perméabilité attendues. Plusieurs types d’essai en forage sont présentés. In order to get administrative authorization, a non dangerous waste landfill site (ISDND, must justify a favourable geological context, which follows the AFNOR “Guide de bonnes pratiques pour les reconnaissances géologiques ». Criteria and technical means are described among which the in situ and lab permeability determination processes. The low and very low permeability coefficient to be measured within the deep argillaceous formations of a landfill site, is a delicate operation which must be representative and accurate. Depending the permeability range, several norms are proposed.

  9. Une installation expérimentale pour l'étude du traitement par combustion des fumées industrielles An Experimental Plant for Processing Industrial Fumes by Combustion

    Directory of Open Access Journals (Sweden)

    Morillon R.

    2006-11-01

    Full Text Available Le rejet à l'atmosphère d'effluents gazeux d'origine industrielle entraîne un accroissement sensible de la pollution atmosphérique ; en outre, il s'accompagne souvent d'une perte d'énergie lorsque l'élément polluant est un hydrocarbure. Dans ce cas, l'utilisation du gaz naturel pour le traitement par combustion des fumées industrielles apporte une solution élégante et souvent peu coûteuse grâce à la récupération d'énergie qu'il est possible de faire. La première partie de l'article rappelle les aspects théoriques de ce traitement ; en particulier, l'influence des divers éléments sur son efficacité y est discutée (composition de l'atmosphère polluée, température, temps de séjour, etc.. II apparaît ainsi que diverses conditions doivent être remplies simultanément pour obtenir une efficacité satisfaisante. Afin de disposer d'éléments d'ingénierie permettant de construire les unités de traitement les plus efficaces et les plus sûres possible, au coût le plus bas possible, la Direction des études et techniques nouvelles du Gaz de France a réalisé une installation expérimentale qui est présentée dans la deuxième partie de l'article. Enfin, quelques examples d'utilisation de cette installation expérimentale, qui constitue un nouvel outil de travail mis à la disposition des utisitateurs et des constructeurs, sont décrits dans la troisième partie de l'article. The discharge into the atmosphere of industrial waste gases causes substantially increased air pollution. Moreover, it is often accompanied by loss of energy when the polluting element is a hydrocarbon. In such cases, the use of natural gas for processing industrial fumes by combustion provides an elegant solution, which moy often prove economical too becouse of the recovery of energy it makes possible. The first part of this article reviews the theoretical aspects of such processing. The way in which its effectiveness is affected by various parameters

  10. Structural Aspects of Flexible Aircraft Control (les Aspects structuraux du controle actif et flexible des aeronefs)

    Science.gov (United States)

    2000-05-01

    est constitude par un .les pressions sur la gouveme et le ensemble de 17 pouts de jauge , de 20 moment de charni~re sont surestimds accildrom~tes, de...avec les corrdlations calcul-essais 130 mm). des rdponses dc jauges de contraintes A 12 Le calcul, comme les essais, permettent chargements statiques...encastrement au mur * 250 capteurs ( pression, jauge , acc~l6romnbtre, fibre optique) gouverne encastrement ~-axe dispositif de s6curit6 ~ guen BLJTEE A JEUl

  11. Identifying the best locations to install flow control devices in sewer networks to enable in-sewer storage

    Science.gov (United States)

    Leitão, J. P.; Carbajal, J. P.; Rieckermann, J.; Simões, N. E.; Sá Marques, A.; de Sousa, L. M.

    2018-01-01

    The activation of available in-sewer storage volume has been suggested as a low-cost flood and combined sewer overflow mitigation measure. However, it is currently unknown what the attributes for suitable objective functions to identify the best location for flow control devices are and the impact of those attributes on the results. In this study, we present a novel location model and efficient algorithm to identify the best location(s) to install flow limiters. The model is a screening tool that does not require hydraulic simulations but rather considers steady state instead of simplistic static flow conditions. It also maximises in-sewer storage according to different reward functions that also considers the potential impact of flow control device failure. We demonstrate its usefulness on two real sewer networks, for which an in-sewer storage potential of approximately 2,000 m3 and 500 m3 was estimated with five flow control devices installed.

  12. Construction of a fast differential thermal analysis apparatus; Realisation d'une installation d'analyse thermique differentielle rapide

    Energy Technology Data Exchange (ETDEWEB)

    Vernois, G [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1964-10-15

    The author analyzes the various possibilities of DTA as well as conventional installation set-ups. He shows that by varying simultaneously the heating rate and the size of the samples it is possible to obtain very similar thermo-grams. He shows the advantages of using fast heating rates and proposes a type of oven and types of crucible which allow heating rates of over 1 deg. per second, rapid manipulation, a controlled atmosphere (from a vacuum up to high pressures) and forced cooling. He gives details of research carried with this type of installation showing the quantitative nature of the analyses and, as an example, studies the influence of a grinding on the qualitative and quantitative results. (author) [French] L'auteur analyse les differentes possibilites de l'ATD ainsi que les schemas classiques des installations. Il montre qu'en jouant simultanement sur la vitesse de chauffe et les dimensions des echantillons on peut ne pas modifier beaucoup l'allure des thermogrammes. Il fait ressortir l'interet de grandes vitesses de chauffe et propose un type de four et des creusets permettant des vitesses de chauffe superieures a 1 deg. par seconde, une manipulation rapide, le controle de l'atmosphere (du vide jusqu'a de hautes pressions) et un refroidissement force. Il presente une etude realisee avec une telle installation montrant le caractere quantitatif des analyses et comme exemple, etudie l'influence du broyage sur les resultats qualitatifs et quantitatifs. (auteur)

  13. Darstellung und Anwendung eines Bewertungsmodells im Rahmen des Controllings unter Beachtung der IAS/IFRS

    OpenAIRE

    Volkmann, Sebastian

    2005-01-01

    Die zunehmende Etablierung des Shareholder Value-Gedankens in Europa, die Rechnungslegung nach IAS/IFRS in Kombination mit der Forderung nach Konvergenz des internen sowie des externen Rechnungswesens erfordern die vertiefte Kapitalmarktorientierung von Unternehmen. Entsprechend werden in dieser Arbeit Ansätze diskutiert, die wertorientierte Unternehmensführung mit Hilfe eines Bewertungsmodells zu unterstützen, um Implementierungslücken auf Ebene des Konzern- oder Geschäftsbereichscontrolling...

  14. Installation for producing sealed radioactive sources; Installation de fabrication de sources radioactives scellees

    Energy Technology Data Exchange (ETDEWEB)

    Fradin, J.; Hayoun, C. [Commissariat a l' Energie Atomique, 91 - Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    This installation has been designed and built for producing sealed sources of fission elements: caesium 137, strontium 90, promethium 147, ruthenium 106 and cerium 144 in particular. The installation consists of sealed and protected cells, each being assigned to a particular production. The safety and the operational reliability of the equipment are the principal considerations which have governed this work. The report describes the installation and, in particular, the apparatus used as well as the various control devices. In conclusion, a review as presented of six years operation. (authors) [French] Cette installation a ete concue et realisee pour effectuer des fabrications de sources scellees d'elements de fission: caesium 137 - strontium 90 - promethium 147 - ruthenium 106 - cerium 144 en particulier. L'installation est composee de cellules etanches et protegees, chacune d'elles etant affectee a une fabrication particuliere. La securite et la surete de fonctionnement de l'ensemble sont parmi les elements principaux qui ont guide l'etude. Le rapport decrit l'installation et plus particulierement l'appareillage utilise ainsi que les divers controles et commandes. Le bilan de fonctionnement apres 6 ans d'exploitation sert de conclusion. (auteurs)

  15. Installation for producing sealed radioactive sources; Installation de fabrication de sources radioactives scellees

    Energy Technology Data Exchange (ETDEWEB)

    Fradin, J; Hayoun, C [Commissariat a l' Energie Atomique, 91 - Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    This installation has been designed and built for producing sealed sources of fission elements: caesium 137, strontium 90, promethium 147, ruthenium 106 and cerium 144 in particular. The installation consists of sealed and protected cells, each being assigned to a particular production. The safety and the operational reliability of the equipment are the principal considerations which have governed this work. The report describes the installation and, in particular, the apparatus used as well as the various control devices. In conclusion, a review as presented of six years operation. (authors) [French] Cette installation a ete concue et realisee pour effectuer des fabrications de sources scellees d'elements de fission: caesium 137 - strontium 90 - promethium 147 - ruthenium 106 - cerium 144 en particulier. L'installation est composee de cellules etanches et protegees, chacune d'elles etant affectee a une fabrication particuliere. La securite et la surete de fonctionnement de l'ensemble sont parmi les elements principaux qui ont guide l'etude. Le rapport decrit l'installation et plus particulierement l'appareillage utilise ainsi que les divers controles et commandes. Le bilan de fonctionnement apres 6 ans d'exploitation sert de conclusion. (auteurs)

  16. Installation design of pump motor control systems for supplied of the RSG-GAS secondary raw water cooling system

    International Nuclear Information System (INIS)

    Kiswanto; Teguh Sulistyo; M-Taufik

    2013-01-01

    It has designed already of an installation of the pump motor control system for supplied of raw water to fulfil the RSG-GAS secondary cooling system. The installation design of this plant is used to supply electrical energy from PLN and 3 phase generator to operate the pump motor embedded multilevel type, capacity, Q = 30 m 3 /h; electric power, PN = 4 kW; voltage, 380V/3-/50Hz, and Y connections that can be operated manually or automatically by using the automatic transfer switch. The results obtained recapitulation total load of 4 kW, the magnitude of the nominal current of 9.5 A; kind of safety and capacity are used NFB 16 A, use of this type of cable to the control panel is PLN NYY 6 mm 2 diameter maximum current capacity of 25 A cable and use the control panel to the pump motor cable type NYY 4 mm 2 diameter maximum current capacity of 20 A. The design of the pump motor control system installation is ready to be implemented. (author)

  17. Mobilising the market potential of biogas installations in Switzerland; Mobilisierung des Marktpotenzials von Biogasanlagen in der Schweiz. Vorstudie: Synthese des vorhandenen Wissens zu Hemmnissen und Foerderfaktoren landwirtschaftlicher und gewerblichindustrieller Biogasanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Umbach-Daniel, A.; Ruetter, H.

    2004-07-01

    This final report for the Swiss Federal Office of Energy (SFOE) presents the results of a preliminary study that aimed to provide a synthesis of all available knowledge on obstacles to the construction of agricultural and commercial/industrial biogas installations and promotional factors. Social, political and cultural factors are examined that can promote or hinder the introduction of the technology and comparison is made to the introduction of organic farming methods in agriculture. In particular, an 'adoption/diffusion' model is looked at. A second part of the report deals with the economic findings and deals with the economic viability of biogas installations and the investments and costs involved. Here, too, economic factors that promote or hinder the use of biogas are examined. Finally, the various players and factors influencing the Swiss biogas scene are looked at and the findings of the study are summarised.

  18. Presentation of the health impact evaluation study of atmospheric emissions of a major coal combustion installation; Mise a jour de l'etude d'evaluation de l'impact sur la sante des rejets atmospheriques des tranches charbon d'une grande installation de combustion

    Energy Technology Data Exchange (ETDEWEB)

    Bonnard, R

    2004-12-15

    In the framework of a working group on the major installations, a study has been realized on a today coal combustion installation. The direct risk by inhalation and the risks bond to indirect exposure of atmospheric releases were analyzed. The calculation method is explained and the uncertainties are discussed to present the results. (A.L.B.)

  19. DoD Needs to Improve Screening and Access Controls for General Public Tenants Leasing Housing on Military Installations (REDACTED)

    Science.gov (United States)

    2016-04-01

    helps enhance service members’ quality of life by improving the condition of military-owned housing faster and more economically than traditional...DEPARTMENT OF THE ARMY SUBJECT: DoD Needs to Improve Screening and Access Controls for General Public Tenants Leasing Housing on Military...public tenants who leased DoD privatized housing before granting those tenants unescorted access to military installations. In addition, DoD officials

  20. Smart Microgrid Energy Management Controls for Improved Energy Efficiency and Renewables Integration at DoD Installations

    Science.gov (United States)

    2013-05-01

    reduced greenhouse gas (GHG) emissions; 2. Increased energy efficiency; and 3. Increased energy surety. This demonstration will also directly impact ...megawatt (MW), as well as a gas-fired cogeneration plant in excess of 7 MW. In the future, additional solar PV, fuel cells and advanced energy storage... Energy Management Controls for Improved Energy Efficiency and Renewables Integration at DoD Installations May 2013 Report Documentation Page Form

  1. Software of microcomputer ELEKTRONIKA-60 installed in the control system of the measuring projector PUOS-4

    International Nuclear Information System (INIS)

    Dikij, V.M.; Nekipelova, G.D.; Shakhbazyan, V.V.; Yurpalov, V.D.

    1990-01-01

    The tasks, structure and aspects of realization of servodrivers of the PUOS-4 measuring projector (measuring carriage, tape transport) on the installed ELEKTRONIKA-60 microcomputer operating in the multi-machine system of film information preprocessing, are considered. Realizability of drivers is estimated under rigid operation conditions using the RTM60 real time monitor. The problem of the projector testing is also considered. 11 refs.; 5 figs.; 1 tab

  2. Existence conditions of optimal trajectories in dynamic control processes; Conditions d'existence de trajectoires optimales des processus dynamiques commandes

    Energy Technology Data Exchange (ETDEWEB)

    Bonnemay-Juricek, L [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-07-01

    The existence of solutions in the optimal control problems with free endpoints is studied in this report and existence conditions are established without the usual assumption that the control region is convex. Furthermore the results, in order to be of some utility in physical applications, are expressed only by means of conditions on the parameters defining the system. (author) [French] Ce rapport etudie l'existence de solutions optimales dans les problemes de commande ou le point terminal est libre et ou la duree de l'evolution du systeme a optimiser est connue. Des conditions d'existence y sont formulees sans recourir a l'hypothese usuelle de convexite du domaine des valeurs des commandes. De plus on a cherche a rendre utilisables les resultats en ne faisant porter les conditions que sur les parametres directement accessibles du systeme. (auteur)

  3. Possibility of using radioactivity control measurements for determining contamination paths in nutritional vectors; Etude des possibilites d'utilisation des resultats de la surveillance de la radioactivite pour la recherche des trajectoires d'evolution de la contamination des vecteurs alimentaires

    Energy Technology Data Exchange (ETDEWEB)

    Garnier, A [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1966-07-01

    The object of the report is to study the possibility of using results of radioactivity controls for determining the paths followed by contamination in nutritional vectors; these are necessary for calculating protection norms. Radioactive contamination of a nutritional vector is expressed in terms of parameters which suggest that a certain number of criteria may be used for choosing the results which are to be exploited. An actual example of a 'vertical' study based on results of measurements made purely for control purposes shows the difficulties which may be encountered. A list of the results obtained by the control networks set up in the Community Countries, either for the atmosphere, for milk, or for other foodstuffs, shows that these networks are not at the present organised in such a way as to make such a study possible. It appears desirable that a large part of the work carried out by the control Services be oriented in such a way as to yield the complementary information required for experimental studies of radioactive contamination transfers. (author) [French] L'objet du rapport est l'examen des possibilites d'utilisation des resultats de la surveillance de la radioactivite pour la recherche des trajectoires d'evolution de la contamination des vecteurs alimentaires, necessaires au calcul des niveaux de protection. La contamination radioactive d'un vecteur alimentaire s'exprime en fonction de parametres, qui suggerent de retenir un certain nombre de criteres pour la selection des resultats a exploiter. Un exemple concret d'etude 'verticale' basee sur des resultats de mesures faites uniquement dans un but de controle met en evidence les difficultes rencontrees. L'inventaire des resultats obtenus par les reseaux de controle des differents Pays de la Communaute, soit pour l'atmosphere, soit pour le lait, soit pour d'autres aliments, montre que ces reseaux ne sont pas actuellement organises de facon a permettre de telles etudes, Il parait souhaitable qu

  4. Evaluation guideline for the study of the radiological impact of based nuclear installations (INB) presented in support of releases authorization demands; Guide d'examen pour l'etude de l'impact radiologique d'une installation nucleaire de base (INB) fournie a l'appui des demandes d'autorisation de rejets

    Energy Technology Data Exchange (ETDEWEB)

    Chartier, M; Despres, A; Supervil, S; Conte, D; Hubert, P; Oudiz, A; Champion, D

    2002-10-01

    In the case of a license demand for the effluents release and water taking for a nuclear installation, the operating must realize a study of the nuclear effluents radiological impact on the environment and the public health. In this context, the study presents technical and methodological specifications which led the Direction of the Nuclear Installations Safety (DSIN) and the General Direction of the Health (DGS) to ask the IPSN the elaboration of a guideline to help these studies evaluation. The guideline presents the regulatory context, the description of the installations, the treatment and the control processes, the rules of management, the description of the environment, the estimation of the radiological impacts and the environment control system definition. (A.L.B.)

  5. Evaluation guideline for the study of the radiological impact of based nuclear installations (INB) presented in support of releases authorization demands; Guide d'examen pour l'etude de l'impact radiologique d'une installation nucleaire de base (INB) fournie a l'appui des demandes d'autorisation de rejets

    Energy Technology Data Exchange (ETDEWEB)

    Chartier, M.; Despres, A.; Supervil, S.; Conte, D.; Hubert, P.; Oudiz, A.; Champion, D

    2002-10-01

    In the case of a license demand for the effluents release and water taking for a nuclear installation, the operating must realize a study of the nuclear effluents radiological impact on the environment and the public health. In this context, the study presents technical and methodological specifications which led the Direction of the Nuclear Installations Safety (DSIN) and the General Direction of the Health (DGS) to ask the IPSN the elaboration of a guideline to help these studies evaluation. The guideline presents the regulatory context, the description of the installations, the treatment and the control processes, the rules of management, the description of the environment, the estimation of the radiological impacts and the environment control system definition. (A.L.B.)

  6. Design, construction and installation of the electromechanical components of the current control of filament of the Pelletron Electron Accelerator

    International Nuclear Information System (INIS)

    Aguilar J, R.A.; Valdovinos A, M.; Lopez V, H.

    1985-01-01

    For the operation of the Pelletron electron accelerator is required to have control of the filament current. For it was designed, built and installed an electromechanical system located in the Acceleration Unit inside the Accelerator tank and operated from the Control console. All the components located inside the tank operated under the following conditions: Pressure: until 7.03 Kg/cm 2 ; High voltage: 10 6 V (only the insulating arrow); Atmosphere: mixture of N 2 and CO 2 or SF 6 . (Author)

  7. Optimizing operation costs of the heating system of a household using model predictive control considering a local PV installation

    DEFF Research Database (Denmark)

    Koch-Ciobotaru, Cosmin; Isleifsson, Fridrik Rafn; Gehrke, Oliver

    2012-01-01

    This paper presents a model predictive controller developed in order to minimize the cost of grid energy consumption and maximize the amount of energy consumed from a local photovoltaic (PV) installation. The usage of as much locally produced renewable energy sources (RES) as possible, diminishes...... the effects of their large penetration in the distribution grid and reduces overloading the grid capacity, which is an increasing problem for the power system. The controller uses 24 hour prediction data for the ambient temperature, the solar irradiance, and for the PV output power. Simulation results...

  8. Active Control Technology for Enhanced Performance Operational Capabilities of Military Aircraft, Land Vehicles and Sea Vehicles (Technologies des systemes a commandes actives pour l'amelioration des performances operationnelles des aeronefs militaires, des vehicules terrestres et des vehicules maritimes)

    National Research Council Canada - National Science Library

    2001-01-01

    ... Technology For Load Alleviation, Active Elements for Structural Design, Active Materials and Applications, Applications Overview, Compressor Stall/ Surge - Measurements, Compressor Stall/Surge - Control...

  9. An acoustically controlled tetherless underwater vehicle for installation and maintenance of neutrino detectors in the deep ocean

    International Nuclear Information System (INIS)

    Ballou, Philip J.

    1997-01-01

    The task of installing and servicing high energy neutrino detectors in the deep ocean from a surface support vessel is problematic using conventional tethered systems. An array of multiple detector strings rising 500 m from the ocean floor, and forming a grid with 50 m spacing between the strings, presents a substantial entanglement hazard for equipment cables deployed from the surface. Such tasks may be accomplished with fewer risks using a tetherless underwater remotely operated vehicle that has a local acoustic telemetry link to send control commands and sensor data between the vehicle and a stationary hydrophone suspended above or just outside the perimeter of the work site. The Phase I effort involves the development of an underwater acoustic telemetry link for vehicle control and sensor feedback, the evaluation of video compression methods for real-time acoustic transmission of video through the water, and the defining of local control routines on board the vehicle to allow it to perform certain basic maneuvering tasks autonomously, or to initiate a self-rescue if the acoustic control link should be lost. In Phase II, a prototype tetherless vehicle system will be designed and constructed to demonstrate the ability to install cable interconnections within a detector array at 4 km depth. The same control technology could be used with a larger more powerful vehicle to maneuver the detector strings into desired positions as they are being lowered to the ocean floor

  10. Requirements for Vertically Installed Runoff Control Boards for the “Paddy Field Dam” and Appropriate Orifice Shapes

    Science.gov (United States)

    Natsuki, Yoshikawa; Hideyuki, Koide; Shin-Ichi, Misawa

    While the “Paddy Field Dam” project has been recognized as an effective flood control measure, there are some cases in which the runoff control boards are vertically installed on the opening of the drainage boxes without careful consideration of the orifice shape and size. The important criteria for the runoff control boards to be satisfied are: 1. to maintain a sufficient peak runoff control function, 2. to avoid excessive ponding causing overflow, 3. to minimize the influence to the ordinary water management, and 4. to reserve sufficient orifice area to avoid blockage of the orifice with floating litters. The purpose of this study is to examine proper shapes and sizes of the orifice to satisfy the criteria for the vertically installed runoff control boards through experiments and simulations. Given the condition that the orifice has sufficient area to avoid overflow with 10 and 20 year return period rainfall event (criteria 2), the simulation results show that the orifice with horizontally wider shapes has advantages over the square or circular shapes in terms of the criteria 1 and 3. The disadvantage of the horizontally wider shapes is the blockage of the orifice with floating litters (criteria 4). In conclusion, we proposed to secure sufficient vertical distance to avoid this problem by setting a lower limit on the vertical distance and then determine the widest horizontal distance to optimize all the criteria. In addition, we have constructed the “Orifice Design Assist Tool” on the basis of the examinations in this study.

  11. 16. national conference of the presidents of the local commissions of information (C.L.I.) around nuclear facilities; 16. conference nationale des presidents de commissions locales d'information (CLI) autour des installations nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    This conference contained two plenary sessions. The first one concerned the epidemiology with the following subjects: the epidemiology, its contributions and its limits; the epidemiological surveillance of cancers in France: role of registers within the device; the aggregates of leukaemia near the nuclear installations; perception and management of the risk; the point of view of the scientific committee of the A.N.C.L.I.; Followed a work in a workshop on the subjects relative to the functioning of the C.L.I. (Organization, relations, information) then the second plenary session with as subjects: organization and functioning of C.L.I., relations and links with A.N.C.L.I., information received and diffused by the C.L.I. (N.C.)

  12. Building system technology with installation bus. Planning now for the future; Gebaeudesystemtechnik - mit Installationsbus. Heute schon an morgen denken

    Energy Technology Data Exchange (ETDEWEB)

    Vogt, D. [RWE Energie AG, Essen (Germany)

    1995-12-31

    In chapter 16 of the anthology about building technology the building system technology with installation bus is described. The following aspects are discussed: limits of the conventional electric installation, building system technology, building system technology - illusion or reality?; The European Installation Bus Association (EIBA). (BWI) [Deutsch] Kapitel 16 des Sammelbandes ueber Building Control ist dem Thema der Gebaeudesystemtechnik mit Installationsbus gewidmet. In diesem Zusammenhang werden folgende Themenbereiche angesprochen: Grenzen der konventionellen Elektroinstallation; Gebaeudesystemtechnik; Gebaeudesystemtechnik - Illusion oder Realitaet?; Die EIBA (European Installation Bus Association). (BWI)

  13. IE Information Notice No. 85-75: Improperly installed instrumentation, inadequate quality control and inadequate postmodification testing

    International Nuclear Information System (INIS)

    Jordan, E.L.

    1992-01-01

    On June 10, 1985, the licensee informed the NRC Resident Inspector that for approximately 5 days LaSalle Unit 2 had been without the capability of automatic actuation of emergency core cooling (ECCS) and that for approximately 3 days during this period the plant had been without secondary containment integrity. The major cause of this condition was improper installation (the variable and reference legs were reversed) of the two reactor vessel level actuation switches which control Division 1 automatic depressurization system (ADS), low pressure core spray (LPCS), and reactor core isolation cooling (RCIC). On July 20, 1985, the Trojan Nuclear Power Plant tripped from 100% power because of a turbine trip that was caused by the loss of the unit auxiliary transformer. All systems functioned normally except that low suction pressure caused one auxiliary feedwater pump to trip and then the other auxiliary feedwater pump to trip after restart of the first auxiliary feedwater pump. The cause of the trips of the auxiliary feedwater pumps can be traced back to improper postmodification adjustment and inadequate postmodification testing following retrofit of environmentally qualified controllers for the auxiliary feedwater system. The auxiliary feedwater pump trips on low suction pressure were caused by excessive combined flow from the two auxiliary feedwater pumps that draw from a single header from the condensate storage tank. The flow control valves were open farther than required after new environmentally qualified controllers had been installed during a recent refueling outage

  14. Analog Fixed Maximum Power Point Control for a PWM Step-downConverter for Water Pumping Installations

    DEFF Research Database (Denmark)

    Beltran, H.; Perez, E.; Chen, Zhe

    2009-01-01

    This paper describes a Fixed Maximum Power Point analog control used in a step-down Pulse Width Modulated power converter. The DC/DC converter drives a DC motor used in small water pumping installations, without any electric storage device. The power supply is provided by PV panels working around....... The proposed Optimal Power Point fix voltage control system is analyzed in comparison to other complex controls....... their maximum power point, with a fixed operating voltage value. The control circuit implementation is not only simple and cheap, but also robust and reliable. System protections and adjustments are also proposed. Simulations and hardware are reported in the paper for a 150W water pumping application system...

  15. Complementary safety assessment assessment of nuclear facilities - Tricastin facility - AREVA; Evaluation complementaire de la surete des installations nucleaires de base - Site du Tricastin - AREVA

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    This complementary safety assessment analyses the robustness of the Areva part of the Tricastin nuclear site to extreme situations such as those that led to the Fukushima accident. This study includes the following facilities: Areva NC Pierrelatte, EURODIF production, Comurhex Pierrelatte, Georges Besse II plant and Socatri. Robustness is the ability for the plant to withstand events beyond which the plant was designed. Robustness is linked to safety margins but also to the situations leading to a sudden deterioration of the accidental sequence. Moreover, safety is not only a matter of design or engineered systems but also a matter of organizing: task organization (including subcontracting) as well as the setting of emergency plans or the inventory of nuclear materials are taken into consideration in this assessment. This report is divided into 10 main chapters: 1) the feedback experience of the Fukushima accident; 2) description of the site and its surroundings; 3) featuring of the site's activities and installations; 4) accidental sequences; 5) protection from earthquakes; 6) protection from floods; 7) protection from other extreme natural disasters; 8) the loss of electrical power and of the heat sink; 9) the management of severe accidents; and 10) subcontracting policy. This analysis has identified 5 main measures to be taken to limit the risks linked to natural disasters: -) continuing the program for replacing the current conversion plant and the enrichment plant; -) renewing the storage of hydrofluoric acid at the de-fluorination workshop; -) assessing the seismic behaviour of some parts of the de-fluorination workshop and of the fluorine fabrication workshop; -) improving the availability of warning and information means in case of emergency; and -) improving the means to mitigate accidental gaseous releases. (A.C.)

  16. Control strategies for peste des petits ruminants in small ruminants of India.

    Science.gov (United States)

    Singh, R P

    2011-12-01

    Peste des petits ruminants (PPR) is a contagious viral disease of small ruminants. It is endemic in several African, Middle Eastern and Asian countries, including India. India has recently taken comprehensive steps to deal with PPR through the development and production of potent vaccines and monoclonal-antibody-based diagnostic kits, while also gathering baseline information on the disease situation and human resources. As a result, PPR can now be controlled by focused vaccinations in high-risk populations of sheep and goats, followed by mass vaccination campaigns. Mass vaccination campaigns must achieve high levels of herd immunity (70% to 80%) to block the epidemic cycle of the virus. With the tools currently available, disease control and subsequent eradication programmes for PPR may be a feasible option, following the example of the National Rinderpest Eradication Programme, which has successfully eradicated rinderpest from India. An understanding of the cultural and socio-economic circumstances of goat and sheep owners and a keen watch on the endemic nature of PPR in neighbouring countries will enhance the success of this approach. Coordinated efforts from all stakeholders, combined with proper funding and execution of control programmes, will be needed to achieve the goal of a PPR-free India. In addition, the availability of effective combined vaccines of PPR with goat pox or sheep pox offers a cost-effective way of simultaneously launching control programmes against all three of these diseases.

  17. Installations for radiation therapy with remote controlled afterloading technique. Ferngesteuerte Applikationsanlagen zur Therapie mit umschlossenen radioaktiven Stoffen

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    Installations for radiation therapy with remote controlled afterloading technique; radiation protection rules for fabrication and construction; amendment 1 to draft standard (DIN) 6853. Compared to the draft standard of Semptember 1980, the following modifications are planned as amendment 1: a. Paragraph no. 1: In the title, the word ''scope'' is changed into ''field of application''. The words ''by moving the radiation source electromecanically'' are deleted. b. Paragraph no. 2'' Standards also applicable'' and the list of ''Additional standards'' are summarized under the heading ''Standards and supporting documents'' (without any paragraph number). c. Paragraph no. 3 ''Terms'' is completed by additional terms and their definitions.

  18. Computer-controlled environmental test systems - Criteria for selection, installation, and maintenance.

    Science.gov (United States)

    Chapman, C. P.

    1972-01-01

    Applications for presently marketed, new computer-controlled environmental test systems are suggested. It is shown that capital costs of these systems follow an exponential cost function curve that levels out as additional applications are implemented. Some test laboratory organization changes are recommended in terms of new personnel requirements, and facility modification are considered in support of a computer-controlled test system. Software for computer-controlled test systems are discussed, and control loop speed constraints are defined for real-time control functions. Suitable input and output devices and memory storage device tradeoffs are also considered.

  19. Study of thermocouples for control of high temperatures; Etude de thermocouples pour le reperage des hautes temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Villamayor, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Faculte des Sciences de l' Universite de Lyon - 69 (France)

    1967-07-01

    Previous works have shown that the tungsten-rhenium alloys thermocouples were a good instrument for control of high temperatures. From its, the author has studied the W/W 26 per cent and W 5 per cent Re/W 26 per cent Re french manufactured thermocouples and intended for control of temperatures in nuclear reactors until 2300 deg. C. In 'out-pile' study he determines the general characteristics of these thermocouples: average calibration curves, thermal shocks influence, response times, and alloys allowing the cold source compensation. The evolution of these thermocouples under thermal neutron flux has been determined by 'in-pile' study. The observations have led the author to propose a new type of thermocouples settled of molybdenum-columbium alloys. (author) [French] Des travaux anterieurs ont montre que les thermocouples des alliages tungstene-rhenium etaient susceptibles de reperer avec precision des hautes temperatures. A partir de la, l'auteur a etudie las thermocouples W/W 26 pour cent Re et W 5 pour cent Re/W 26 pour cent Re de fabrication francaise et destines au controle des temperatures dans les reacteurs nucleaires, jusqu'a 2300 deg. C Dans l'etude 'hors-pile' il a determine les caracteristiques generales de ces thermocouples: courbes d'etalonnage moyen, influence des chocs thermiques, temps de reponse, et alliages assurant la compensation de soudure froide. L'etude 'en-pile' a permis de rendre compte de l'evolution de ces thermocouples sous flux neutroniques. Les phenomenes observes ont conduit l'auteur a proposer un nouveau type de thermocouples constitues d'alliages molybdene-niobium. (auteur)

  20. On-off controller for installation to test the pressurized water reactor material

    International Nuclear Information System (INIS)

    Zauq, M.H.

    1982-05-01

    This report describes the design of an ON-OFF controller based on the 6800 microprocessor in its assembly language and its interfacing with its environment (sensors, periphery, etc). The controller is meant to control the temperature and the pressure inside an experimental chamber in which the material under test is placed. The ''Design basis accident'' conditions (e.g., LOCA) for a pressurized water reactor are simulated in the experimental chamber [fr

  1. Control and protection system for an electron injector installed in a high-voltage terminal

    International Nuclear Information System (INIS)

    Martin, D.; Radu, A.; Baciu, G.; Grigore, D.

    1979-01-01

    The basic principles of operation of the control and protection system for an electron accelerator gun are described. The electron gun parameters are independently controlled by using four special secondary windings of the high-voltage transformer providing the accelerating voltage. Four groups of thyristor ac regulators employing phase control are connected so as to provide independent adjustment of each parameter of the gun. The power controller of modular construction has a single-phase supply from the 50 Hz 220 V mains. (orig.)

  2. BATING A REFERENCE INSTALLATION BASED ON CONTROLLED-POTENTIAL COULOMETRY METOD IN THE FRAME OF IMPROVING THE STATE PRIMARY STANDARD GET 176 AND ITS MEASUREMENT CAPABILITIES

    Directory of Open Access Journals (Sweden)

    V. M. Zyskin

    2016-01-01

    Full Text Available The results of developing of reference installation, based on a controlled-potential coulometry, in the frame of improving the State primary standard of the units of mass (molar fraction and mass (molar concentration of a component in the liquid and solid substances and materials GET 176 are presented. The physical principles of controlled-potential coulometry, content and metrological characteristics of the developed installation are considered. Measurement results of copper, iron and lead contents in the certified reference materials of metals' solutions and CRM of brass produced by BAM, Germany, obtained using reference installation are given.

  3. Proposal for the award of a blanket contract for the supply, installation and maintenance of the LHC access control system

    CERN Document Server

    2004-01-01

    This document concerns the award of a blanket contract for the supply, installation and maintenance of the LHC access control system. Following a market survey carried out among 134 firms in fifteen Member States, a call for tenders (IT-3026/TS/LHC) was sent on 22 January 2004 to eight firms and eight consortia in six Member States. By the closing date, CERN had received nine tenders from two firms and seven consortia in five Member States. The Finance Committee is invited to agree to the negotiation of a blanket contract with the consortium CEGELEC CENTRE EST (FR) - CEGELEC (NL), the lowest technically compliant bidder, for the supply, installation and maintenance of the LHC access control system for a total amount not exceeding 4 600 000 euros (7 141 000 Swiss francs), subject to revision for inflation from 1 January 2007. The rate of exchange used is that stipulated in the tender. The firm has indicated the following distribution by country of the contract value covered by this adjudication proposal: FR - ...

  4. NRC Information No. 87-56: Improper hydraulic control unit installation at BWR plants

    International Nuclear Information System (INIS)

    Rossi, C.E.

    1992-01-01

    This information notice is being provided to alert addressees to a potential problem that could affect the ability of the hydraulic control units (HCUs) to control the positioning of the control rods in the event of an earthquake. In addition, the potential for damage to the control rod drive (CRD) system withdraw lines that exists under certain conditions could result in a small-break loss-of-coolant accident in the HCU area. The CRD system controls the position of the control rods within the reactor core either to change reactor core power or to rapidly shut down the reactor (scram). The HCU is a major component of the CRD system that incorporates all the hydraulic, electrical, and pneumatic equipment necessary to move one CRD mechanism during normal or scram operations. This equipment, which includes the accumulators, CRD insert lines, CRD withdraw lines, and scram valves, is supported by the HCU frames. If a sufficiently large number of HCU frame bolts are missing or loose, a Safe Shutdown Earthquake (SSE) could result in damage affecting the ability of the CRD system to control the positioning of the control rods. In addition, damage to a CRD withdraw line could result in a small-break loss-of-coolant accident in the area of the HCUs

  5. Complete automation of nuclear reactors control; Automatisation complete de la conduite des reacteurs nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Weill, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1955-07-01

    The use of nuclear reactor for energy production induces the installation of automatic control systems which need to be safe enough and can adapt to the industrial scale of energy production. These automatic control systems have to insure the constancy of power level and adjust the power produced to the energy demand. Two functioning modes are considered: nuclear plant connected up to other electric production systems as hydraulic or thermic plants or nuclear plants functioning on an independent network. For nuclear plants connected up with other production plants, xenon poisoning and operating cost lead to keep working at maximum power the nuclear reactors. Thus, the power modulation control system will not be considered and only start-up control, safety control, and control systems will be automated. For nuclear power plants working on an independent network, the power modulation control system is needed to economize fuel. It described the automated control system for reactors functioning with constant power: a power measurement system constituted of an ionization chamber and a direct-current amplifier will control the steadfastness of the power produced. For reactors functioning with variable power, the automated power control system will allow to change the power and maintain it steady with all the necessary safety and will control that working conditions under P{sub max} and R{sub max} (maximum power and maximum reactivity). The effects of temperature and xenon poisoning will also be discussed. Safety systems will be added to stop completely the functioning of the reactor if P{sub max} is reached. (M.P.)

  6. Installation of the product transport system and control system for the Co-60 irradiator at the Institute of Investigations of the Alimentary Industry (IIIA), La Havana, Cuba

    International Nuclear Information System (INIS)

    Tran Khac An; Le Minh Tuan; Pham Thi Thu Hong; Nguyen Thanh Cuong; Huynh Dong Phuong; Ha Thanh Viet; Truong Vu Thanh Nhan

    2016-01-01

    Under the protocol of international cooperation in science and technology between Vietnam and Cuba - “Installation of the product transport system and control system for the Cobalt-60 irradiator at the Institute of Investigations of the Alimentary Industry (IIIA)”, the renovation of the irradiator has been started since 2012 and carried out by Research and Development Center for Radiation Technology (VINAGAMMA). The renovation work comprises the installation of the tote box transport system that was designed and constructed by Isotope Institute Budapest, Hungary, the installation of the PLC based control system which were designed and constructed by VINAGAMMA, installations of technological systems and training Cuban irradiator operators. The project has been successfully implemented and the industrial Co-60 irradiator with new control system has been put into operation. (author)

  7. Contribution to the study and use of ionisation chambers for nuclear reactor control (1965); Contribution a l'etude et a l'utilisation des chambres d'ionisation pour le controle des reacteurs nucleaires (1965)

    Energy Technology Data Exchange (ETDEWEB)

    Duchene, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-02-15

    high-power reactors. (author) [French] Les chambres d'ionisation sont actuellement les detecteurs les mieux adaptes au controle des reacteurs nucleaires par des mesures neutroniques. Nous avons cru bon de rappeler quelques generalites concernant la dynamique des reacteurs, les differents procedes de detection des neutrons, le fonctionnement des chambres d'ionisation et les methodes de mesure utilisees. Notre contribution aux techniques de controle des reacteurs consiste d'une part en une tentative de synthese des facteurs intervenant dans le fonctionnement des chambres d'ionisation, l'etude de ces facteurs, et d'autre part l'elaboration de chambres d'ionisation a fission et a bore permettant de suivre la marche d'un reacteur du demarrage jusqu'a la puissance maximale. Dans le domaine des chambres a fission, nous avons en particulier ameliore les techniques de depot d'oxyde d'uranium sur l'aluminium et realise la mise au point de depots par electrolyse sur d'autres metaux: acier inoxydable, cuivre, molybdene, nickel, tantale, titane, kovar, tungstene et beryllium. Nous avons elabore plusieurs types de chambres a fission servant au demarrage des reacteurs: un type de performances moyennes actuellement utilise dans les piles francaises un type a haute sensibilite un type a haute temperature qui a fonctionne jusqu'a 600 deg. C. En ce qui concerne les chambres a bore, nous avons etudie les perturbations apportees dans les mesures par l'exposition des chambres a d'importants flux de neutrons et a un rayonnement {gamma} intense. Cette exposition produit une modification des proprietes des materiaux constitutifs et la production dans les chambres d'un bruit de fond qui peut gener considerablement les mesures neutroniques. Nous avons montre que la technique de compensation permettait de limiter l'importance de ce bruit de fond et d'augmenter ainsi la plage de fonctionnement des chambres d'ionisation classiques destinees aux mesures de puissance. Enfin, nous avons realise deux

  8. Solar heating and cooling system installed at RKL Controls Company, Lumberton, New Jersey. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1981-03-01

    Solar heating and cooling of a 40,000 square foot manufacturing building, sales offices and the solar computer control center/display room are described. Information on system description, test data, major problems and resolutions, performance, operation and maintenance manual, manufacturer's literature and as-built drawings are provided also. The solar system is composed of 6000 square feet of Sunworks double glazed flat plate collectors, external above ground storage subsystem, controls, ARKLA absorption chiller, heat recovery and a cooling tower.

  9. Nuclear safety and radiation protection report of the Chooz nuclear facilities - 2010; Rapport sur la surete nucleaire et la radioprotection des installations nucleaires de Chooz - 2010

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-06-15

    This safety report was established under the article 21 of the French law no. 2006-686 of June 13, 2006 relative to nuclear safety and information transparency. It presents, first, the facilities of the Chooz nuclear power plant (Ardennes (FR)): 2 PWR reactors in operation (Chooz B, INB 139 and 144) and one partially dismantled PWR reactor (Chooz A, INB 163). Then, the nuclear safety and radiation protection measures taken regarding the facilities are reviewed: nuclear safety definition, radiation protection of intervening parties, safety and radiation protection improvement paths, crisis management, external and internal controls, technical situation of facilities, administrative procedures in progress. The incidents and accidents which occurred in 2010, are reported as well as the radioactive and non-radioactive (chemical, thermal) effluents discharge in the environment. Finally, The radioactive materials and wastes generated by the facilities are presented and sorted by type of waste, quantities and type of conditioning. Other environmental impacts (noise, microbial proliferation in cooling towers) are presented with their mitigation measures. Actions in favour of transparency and public information are presented as well. The document concludes with a glossary and a list of recommendations from the Committees for health, safety and working conditions. (J.S.)

  10. Nuclear safety and radiation protection report of the Flamanville nuclear facilities - 2010; Rapport sur la surete nucleaire et la radioprotection des installations nucleaires de Flamanville - 2010

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-06-15

    This safety report was established under the article 21 of the French law no. 2006-686 of June 13, 2006 relative to nuclear safety and information transparency. It presents, first, the facilities of the Flamanville nuclear power plant (Manche (FR)): 2 PWR reactors in operation (INB 108 and 109), and 1 PWR under construction (Flamanville 3, INB 167). Then, the nuclear safety and radiation protection measures taken regarding the facilities are reviewed: nuclear safety definition, radiation protection of intervening parties, safety and radiation protection improvement paths, crisis management, external and internal controls, technical situation of facilities, administrative procedures in progress. The incidents and accidents which occurred in 2010, are reported as well as the radioactive and non-radioactive (chemical, thermal) effluents discharge in the environment. Finally, The radioactive materials and wastes generated by the facilities are presented and sorted by type of waste, quantities and type of conditioning. Other environmental impacts (noise, water consumption and waste management at Flamanville 3 construction site) are presented with their mitigation measures. Actions in favour of transparency and public information are presented as well. The document concludes with a glossary and a list of recommendations from the Committees for health, safety and working conditions. (J.S.)

  11. CONTROLE DES CENTRES F+ DANS LES COUCHES MINCES D’OXYDE DE ZINC

    Directory of Open Access Journals (Sweden)

    A DJELLOUL

    2000-12-01

    Il est établi que la concentration des lacunes  peut être régulée à la limite de l’ordre deux pour des températures ne dépassant pas 980 K. Au-delà de cette température, se crée un autre type de défaut dans les couches de ZnO, qui est le zinc interstitiel.

  12. Electron beam deflection control system of a welding and surface modification installation

    Science.gov (United States)

    Koleva, E.; Dzharov, V.; Gerasimov, V.; Tsvetkov, K.; Mladenov, G.

    2018-03-01

    In the present work, we examined the patterns of the electron beam motion when controlling the transverse with respect to the axis of the beam homogeneous magnetic field created by the coils of the deflection system the electron gun. During electron beam processes, the beam motion is determined the process type (welding, surface modification, etc.), the technological mode, the design dimensions of the electron gun and the shape of the processed samples. The electron beam motion is defined by the cumulative action of two cosine-like control signals generated by a functional generator. The signal control is related to changing the amplitudes, frequencies and phases (phase differences) of the generated voltages. We realized the motion control by applying a graphical user interface developed by us and an Arduino Uno programmable microcontroller. The signals generated were calibrated using experimental data from the available functional generator. The free and precise motion on arbitrary trajectories determines the possible applications of an electron beam process to carrying out various scientific research tasks in material processing.

  13. Analysis of support installation and strata control in ventilation tunnels and coal chutes in steep seams

    Energy Technology Data Exchange (ETDEWEB)

    Moroz, V D; Belyaev, A N; Kostyuk, I S

    1984-01-01

    The VNIMI and the Donugi branch in Gorlovka developed and tested a system for strata control in gate roads for ventilation and in coal chutes in inclined and steep medium and thick coal seams. The roof is supported by cribbings made of slabs of reinforced concrete with yielding elements. Timber is used as yielding material. Tests showed that thickness of yielding layers between concrete slabs should range from 15 to 20% of coal seam thickness. Yielding elements increase yield strength of the system to about 2 MN (load distribution is more regular). The tests show that the cribbings are an efficient system for strata control in workings driven in coal seams with dip angle from 35 to 60 degrees. Performance of concrete cribbings in ventilation gate roads and coal chutes in selected mines of the Ukrainian SSR is analyzed.

  14. The construction of standardised equipment expressly adapted to the different methods of radiation control; Realisation de materiel standardise specialement adapte aux divers modes de controle des radiations

    Energy Technology Data Exchange (ETDEWEB)

    Savouyaud, J; Menoux, A [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    The authors show what general characteristics must have equipment designed for radiation control. This equipment must make possible the measurement of doses corresponding to 1/10 of the maximum permissible limit. It should be designed for a specific purpose, and finally it should be independent as far as possible. The authors review the different types of control which it is necessary to effect. (author) [French] Les auteurs indiquent quelles doivent etre les caracteristiques generales du materiel de controle des radiations. Ce materiel doit permettre l'appreciation de mesures correspondant au 1/10{sup e} des limites maximales admissibles. Il devrait etre concu pour une fonction determinee, enfin, il doit etre dans la mesure du possible, autonome. Les auteurs passent en revue les differents types de controle qu'il est necessaire de couvrir. (auteur)

  15. X-ray diagnostic installation with an image intensifier TV chain and a dose rate control device

    Energy Technology Data Exchange (ETDEWEB)

    Duemmling, K; Schott, O

    1977-04-28

    The person performing the examination can key up the dose rate briefly via the X-ray tube current, e.g., if the movement of a contrast medium is to be observed on the video screen and only certain phases in this movement, which are of diagnostic significance, are to be viewed more closely. The upward change necessary to reduce quantum noise by a certain factor is made by means of a switch. This at the same time results in a reduction of brightness (over-exposure) of the X-ray image on the video screen by actuating an aperture system between the image intensifier, and the TV camera. To prevent the X-ray tube from being overloaded during key-up of the dose rate, a time limit switch is installed in the control system.

  16. Radiometric installations for automatic control of industrial processes and some possibilities of the specialized computers application

    International Nuclear Information System (INIS)

    Kuzino, S.; Shandru, P.

    1979-01-01

    It is noted that application of radioisotope devices in circuits for automation of some industrial processes permits to obtain the on-line information about some parameters of these processes. This information being passed to a computer, controlling the process, permits to obtain and maintain some optimum technological perameters of this process. Some elements of the automation stem projecting are given from the poin of wiev of the radiometric devices tuning, calibration of the radiometric devices with the purpose to get a digital answer in the on-line regime with the preset accuracy and thrustworthyness levels for supplying them to the controlling computer; determination of the system's reaction on the base of the preset statistical criteria; development, on the base of the data obtained from the computer, of an algorithm for the functional checking of radiometric devices' characteristics, - stability and reproductibility of readings in the operation regime as well as determination of the value threshold of an answer, depending on the measured parameter [ru

  17. A new Master Events Controller is prepared for installation in STS-99 Endeavour

    Science.gov (United States)

    2000-01-01

    A new Enhanced Main Events Controller (E-MEC) for Shuttle Endeavour sits on a table in a Quality trailer in the Launch Pad 39B area. The original E-MEC in Endeavour became suspect during the Jan. 31 launch countdown and mission STS-99 was delayed when NASA managers decided to replace it. Each Shuttle carries two enhanced master events controllers (E-MECs), which provide relays for onboard flight computers to send signals to arm and fire pyrotechnics that separate the solid rockets and external tank during assent. The E-MECs are located in the orbiter's aft compartment and both are needed for the Shuttle to be cleared for flight. Currently Endeavour and Columbia are the only two orbiters with the E-MECs. Built by Rockwell's Satellite Space Electronics Division, Anaheim, Calif., each unit weighs 65 pounds and is approximately 20 inches long, 13 inches wide and 8 inches tall. Previously, three Shuttle flights have been scrubbed or delayed due to faulty MECs: STS-73, STS-49 and STS-41-D. Before workers can begin E-MEC replacement efforts at the launch pad, cryogenic reactants must be offloaded from the orbiter and Space Shuttle ordnance disconnected. The next scheduled date for launch of STS-99 is Feb. 11 at 12:30 p.m. EST.

  18. Control of activities at the neighbourhood of basic nuclear installations. Guide Nr 15, Release of the 2016/03/24

    International Nuclear Information System (INIS)

    2016-01-01

    After having indicated the relevant regulatory texts, and described the context (the taking of nuclear activities into account in various town and land planning documents), this guide defines the ASN national doctrine for the control of activities about basic nuclear installations (BNI) and at presenting tools aiming at limiting the presence and growth of populations exposed to nuclear risks. It recalls and discusses the four main pillars of the management of risks posed by BNIs: risk reduction at the origin (on charge of the operator), implementation of emergency and rescue plans, preventive information of population and local communities, and control of activities in areas exposed to the risks. It states the principles adopted by the ASN regarding the control of activities about BNIs. This doctrine is based on three principles: to preserve the rescue plan operability, to favour a local development beyond an area of risk with fast kinetics, and to enable a controlled development which responds to the needs of the resident population. Then, the issue of land use conditions is addressed and discussed: objectives to be reached, discussion of vulnerability levels depending on activities, management of new projects by using various tools (servitude of public interest, town planning documents and code)

  19. Installation Art

    DEFF Research Database (Denmark)

    Petersen, Anne Ring

    Despite its large and growing popularity – to say nothing of its near-ubiquity in the world’s art scenes and international exhibitions of contemporary art –installation art remains a form whose artistic vocabulary and conceptual basis have rarely been subjected to thorough critical examination....... In Installation Art: Between Image and Stage, Anne Ring Petersen aims to change that. She begins by exploring how installation art developed into an interdisciplinary genre in the 1960s, and how its intertwining of the visual and the performative has acted as a catalyst for the generation of new artistic...... phenomena. It investigates how it became one of today’s most widely used art forms, increasingly expanding into consumer, popular and urban cultures, where installation’s often spectacular appearance ensures that it meets contemporary demands for sense-provoking and immersive cultural experiences. The main...

  20. Installation Art

    DEFF Research Database (Denmark)

    Petersen, Anne Ring

    . In Installation Art: Between Image and Stage, Anne Ring Petersen aims to change that. She begins by exploring how installation art developed into an interdisciplinary genre in the 1960s, and how its intertwining of the visual and the performative has acted as a catalyst for the generation of new artistic......Despite its large and growing popularity – to say nothing of its near-ubiquity in the world’s art scenes and international exhibitions of contemporary art –installation art remains a form whose artistic vocabulary and conceptual basis have rarely been subjected to thorough critical examination...... phenomena. It investigates how it became one of today’s most widely used art forms, increasingly expanding into consumer, popular and urban cultures, where installation’s often spectacular appearance ensures that it meets contemporary demands for sense-provoking and immersive cultural experiences. The main...

  1. Border installations

    International Nuclear Information System (INIS)

    Lenaerts, Koen

    1988-01-01

    Border installations cover all nuclear plants located near the border with a neighbouring state. However, the actual distance depends on the context. The distance can vary considerably. Also the prohibition on siting near a heavily populated area also defines the actual distance variably. The distance criteria may be modified by other factors of topography, prevailing climate and so on. Various examples which illustrate the problems are given. For example, the Creys-Melville nuclear power plant is 80km from Geneva and the Cattonam installation is 12km from the French border with Luxembourg and Germany. The Cattenom case is explained and the legal position within the European Institutions is discussed. The French licensing procedures for nuclear power stations are described with special reference to the Cattenom power plant. Border installations are discussed in the context of European Community Law and Public International Law. (U.K.)

  2. Multiphase flow dynamics and control; Dynamique et controle des ecoulements polyphasiques

    Energy Technology Data Exchange (ETDEWEB)

    Duret, E.

    2005-02-01

    Production in the petroleum industry requires a better knowledge of multiphase flow, as the design of pipelines may cause the flow to become strongly unstable. For instance, for low flow rates and when a sea line ends at a riser, the riser base may accumulate liquid and stop the flow of gas. Then, the upstream gas is compressed until its pressure is large enough to push the liquid slug downstream. Under such conditions, a cyclic process occurs which is called severe slugging, generating large and fast fluctuations in pressure and flow rates. This thesis is devoted to two methods to stabilize this undesirable phenomenon. Using the pipeline's ability to separate phases to pick-up the gas upstream the riser base, they are mainly based on the perturbation theory (fast proportional effect, slow integral effect). The first one uses a secondary riser to transport the gas to the surface facilities. A stability study worked out with the phase diagrams technique shows that it is a good method to control this phenomenon. However, it imposes a high pressure in all the system. Thus, the second controller re-injects the gas at a determined height in the riser to decrease the hydrostatic pressure. A first stability study in open loop give a criterion on the minimal reinjection height. Then, the controller is developed by using the two-time scale control techniques. Finally, let us denote that these two controllers have been validated with a small size experimental set up. (author)

  3. Solution des systemes de controle de grandes dimensions basee sur les boucles de retroaction dans la simulation des reseaux electriques

    Science.gov (United States)

    Mugombozi, Chuma Francis

    The generation of electrical energy, as well as its transportation and consumption, requires complex control systems for the regulation of power and frequency. These control systems must take into account, among others, new energy sources such as wind energy and new technologies for interconnection by high voltage DC link. These control systems must be able to monitor and achieve such regulation in accordance with the dynamics of the energy source, faults and other events which may induce transients phenomena into the power network. Such transients conditions have to be analyzed using the most accurate and detailed hence, complex models of control system. In addition, in the feasibility study phase, the calibration or the setup of equipment as well as in the operation of the power network, one may require decision aid tools for engineers. This includes, for instance, knowledge of energy dissipated into the arresters in transient analysis. These tools use simulation programs data as inputs and may require that complex functions be solved with numerical methods. These functions are part of control system in computer simulator. Moreover, the simulation evolves in a broader context of the development of digital controller, distributed and parallel high performance computing and rapid evolutions in computer (multiprocessor) technology. In such context, a continuing improvement of the control equations solver is welcomed. Control systems are modelled using ax=b simultaneous system of equations. These equations are sometimes non-linear with feedback loops and thus require iterative Newton methods, including the formation of a Jacobian matrix and ordering as well as processing by graph theory tools. The proposed approach is based on the formulation of a reduced rank Jacobian matrix. The dimension is reduced up to the count of feedback loops. With this new approach, gains in computation speed are expected without compromising its accuracy when compared to classical full

  4. Installation and test of new human machine interface of the HANARO control computer

    International Nuclear Information System (INIS)

    Kim, Min Jin; Kim, Y. K.; Choi, Y. S.; Jung, H. S.; Kim, H. K.; Wu, J. S.

    2002-06-01

    As a first step of the long-term replace plan, we upgraded BCS, the HMI of HANARO control computer. ProcessSuite system that was imported this time consists of a workstation class PC and application program that is compatible with MLC and operates on Windows NT 4.0. Operation data storage function that was disabled due to disk drive failure of BCS is now enabled and log scale display and a secure means to enter demand power are made available. Mostly the configuration of ProcessSuite system was found correct although we found some discrepancy and corrected them. The further works to be done are the addition of graphic display screens based on flow diagram, selection and procurement of alarm printer, provision for chart recorders, transmission of important operating parameters and so on. After that, we will produce some documents to prove the performance of new system and prepare user manual for operator

  5. DEVELOPING UNIVERSAL INSTALLATION WITH AUTOMATIC MONITORING AND CONTROL PROCESS OF MIXING, WHIPPING AND MOLDING BISCUIT DOUGH

    Directory of Open Access Journals (Sweden)

    E. I. Ponomareva

    2013-01-01

    Full Text Available As products of high nutritional value can be used bakery products from a mixture of rye and wheat flour with the application of a grain of rye. Use whole grains assumes control of its quality according to organoleptic, physico-chemical and hygienic indices. Method of determining the color characteristics of grain scanner-metric method us-ing tablet scanner HP ScanJet 3570C with application of computer processing of images in RGB color mode is proposed. Application of the method to determine the color characteristics showed that rye, prepared in different ways, has different intensity of coloring, and the maximum intensity of the color components is observed at native grain.

  6. Good practice recommendations - medical-professional control of internal exposure to radionuclides in nuclear base installations

    International Nuclear Information System (INIS)

    Berard, Philippe; Blanchin, Nicolas; Fottorino, Robert; Gonin, Michele; Quesne, Benoit; Agrinier, Anne-Laure; Bourgaut, Laurent; Blanchardon, Eric; Challeton de Vathaire, Cecile; Franck, Didier; Piechowski, Jean; Fritsch, Paul; Poncy, Jean-Luc

    2011-07-01

    The first part of this voluminous report presents the context and method of definition of recommendations for a clinical practice and comprises a literature review of national, European and international recommendations, standards and work-group reports. The second part develops recommendations under four main themes: assessment of the committed effective dose (objectives, implementation, communication, traceability and archiving), control programs, dosimetric estimation based on results, and health risk and taking into care by the occupational physician. The authors adopted the same structure for each sub-theme or issue: target extract of regulatory and standard requirements and international recommendations, analysis of literature and of data from professional practices, opinion of the work-group, and graded recommendations with respect to the proof level

  7. Water pollution control. Sewage sludges processing; Lutte contre la pollution des eaux. Traitements des boues d'epuration

    Energy Technology Data Exchange (ETDEWEB)

    Guibelin, E.

    1999-04-01

    The today environmental policy leads the industrial to better control their wastes. In this context, the author deals with the industrial liquid wastes and especially with sewage sludges after residual industrial water processing. The first part presents the sludges physical, chemical and rheological characteristics according to the different industries. The second part deals with the volume and olfactive nuisances reduction processes. (A.L.B.)

  8. Nuclear installations

    International Nuclear Information System (INIS)

    2001-01-01

    This document presents the fulfilling of the Brazilian obligations under the Convention on Nuclear Safety. The Chapter 2 of the document contains some details about the existing Brazilian nuclear installations. Also, safety improvements at Angra 1 and aspects of Angra 2 and 3 are reported

  9. Nuclear installations

    International Nuclear Information System (INIS)

    1998-01-01

    This document presents the fulfilling of the Brazilian obligations under the Convention on Nuclear Safety. The Chapter 2 of the document contains some details about the existing Brazilian nuclear installations. Also, safety improvements at Angra 1 and aspects of Angra 2 and 3 are reported

  10. Model of purchase contract of the electric power produced by installations which valorize the domestic wastes or equivalent, at the exception of the installations using biogas, and subjected to the electric power purchase obligation. Established in the application of the article 5 from the decree of the 10 may 2001 and approved by the ministry charged with the electric power; Modele de contrat d'achat de l'energie electrique produite par les installations qui valorisent des dechets menagers ou assimiles, a l'exception des installations utilisant du biogaz, et beneficiant l'obligation d'achat d'electricite. Etablie en application de l'article 5 du decret du 10 mai 2001 et approuve par le Ministre charge de l'electricite

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    The text of the contract is provided presenting the general conditions and specific conditions adapted to the installation characteristics of the electric power producer: contract object, connecting to the public network, producer installation, reciprocal agreements, measure and control of the energy and power, tariffs periods, price of the bought energy, taxes, payments, contract management, validity, suspension modification or avoidance of the contract. (A.L.B.)

  11. Installations solaires photovoltaïques

    CERN Document Server

    2014-01-01

    Cet ouvrage présente les règles de conception et de mise en œuvre des installations photovoltaïques raccordées au réseau public de distribution à basse tension. Il s’applique aux bâtiments neufs et existants et concerne non seulement les petites installations résidentielles, d’une puissance de l’ordre de quelques kWc, mais aussi celles des bâtiments collectifs, tertiaires ou agricoles. Il traite successivement : - des fondamentaux de l'énergie solaire photovoltaïque (gisement solaire, principe de la conversion, composants d'une installation...) ; - du dimensionnement de l'installation (choix des matériels, règles de conception, estimation de l'énergie récupérable...) ; - de sa mise en oeuvre (travail en hauteur, habilitation électrique, mise en service, maintenance...) ; - des démarches administratives nécessaires (aides financières, accès au réseau de distribution, vente de l'électricité produite...).

  12. The installations maintenance control using SAP R/3; O controle de manutencao de instalacoes utilizando o SAP R/3

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro, Robison Tirre; Pereira, Paulo Manoel Borges; Jorge, Kemal Vieira [Transportadora Brasileira Gasoduto Bolivia Brasil S.A., Rio de Janeiro, RJ (Brazil)

    2004-07-01

    TBG (Transportadora Brasileira Gasoduto Bolivia Brasil S.A.) began their operations in 1999 and since the beginning the SAP R/3 PM module (Plant Maintenance) is used for the control of the maintenance activities and to manager the Master Maintenance and Inspection Plans. On these five years, a series of reports and SAP functionalities were developed or configured to adapt the system R/3 to the needs of TBG maintenance. Now, the whole management and control of the surface facilities maintenance (compression station, city gate, measurement station, etc) is accomplished by SAP R/3 system. (author)

  13. Purification by ion exchange resins of the heavy water of the reactors EL 1 and EL 2. A - the purifying process. Equipment and results; Purification par resines echangeuses d'ions de l'eau lourde des reacteurs EL1 et EL2. A - conduite de la purification. Installations et resultats

    Energy Technology Data Exchange (ETDEWEB)

    Chenouard, J.; Roth, E. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1957-07-01

    The heavy water was purified by tapping off part of the moderator over a mixed bed of anion and cation exchangers. The heavy water leaving the columns has a resistivity reaching several-meg-ohms, which allows the resistivity of the moderator to be maintained between 10{sup 5} and 10{sup 6} ohms/cm. Two methods of deuteration of the ion exchangers are described, as well as the heavy water recuperation from resins charged with radioactive products. The influence of the purity of the water on the radiolytic dissociation is investigated. An interpretation of the variations in pH and of the formation of hydrogen peroxide is given. In addition the report contains a general description of the EL1 and EL2 purification installations. (author) [French] L'epuration de l'eau lourde a ete effectuee en derivant une partie du moderateur sur un lit melange d'echangeurs d'anions et de cations. Les colonnes delivrent de l'eau lourde dont la resistivite atteint plusieurs megohms; ceci permet d'entretenir la resistivite du moderateur entre 10{sup 5} et 10{sup 6} ohms/cm. Deux procedes deuteriation des echangeurs d'ions sont decrits de meme que la recuperation de l'eau lourde partir des resines chargees de produits radioactifs. L'influence de la purete de l'eau sur sa dissociation radiolytique est etudiee. Une interpretation est donnee des variations de pH et de la formation d'eau oxygenee. Le rapport comprend en outre une description generale des installations d'epuration de EL1et EL2. (auteur)

  14. Purification by ion exchange resins of the heavy water of the reactors EL 1 and EL 2. A - the purifying process. Equipment and results; Purification par resines echangeuses d'ions de l'eau lourde des reacteurs EL1 et EL2. A - conduite de la purification. Installations et resultats

    Energy Technology Data Exchange (ETDEWEB)

    Chenouard, J; Roth, E [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1957-07-01

    The heavy water was purified by tapping off part of the moderator over a mixed bed of anion and cation exchangers. The heavy water leaving the columns has a resistivity reaching several-meg-ohms, which allows the resistivity of the moderator to be maintained between 10{sup 5} and 10{sup 6} ohms/cm. Two methods of deuteration of the ion exchangers are described, as well as the heavy water recuperation from resins charged with radioactive products. The influence of the purity of the water on the radiolytic dissociation is investigated. An interpretation of the variations in pH and of the formation of hydrogen peroxide is given. In addition the report contains a general description of the EL1 and EL2 purification installations. (author) [French] L'epuration de l'eau lourde a ete effectuee en derivant une partie du moderateur sur un lit melange d'echangeurs d'anions et de cations. Les colonnes delivrent de l'eau lourde dont la resistivite atteint plusieurs megohms; ceci permet d'entretenir la resistivite du moderateur entre 10{sup 5} et 10{sup 6} ohms/cm. Deux procedes deuteriation des echangeurs d'ions sont decrits de meme que la recuperation de l'eau lourde partir des resines chargees de produits radioactifs. L'influence de la purete de l'eau sur sa dissociation radiolytique est etudiee. Une interpretation est donnee des variations de pH et de la formation d'eau oxygenee. Le rapport comprend en outre une description generale des installations d'epuration de EL1et EL2. (auteur)

  15. Sizewell 'B' cable installation

    International Nuclear Information System (INIS)

    Gemmell, D.R.

    1992-01-01

    N G Bailey and Co. Ltd., UK were awarded the contract for the procurement, manufacture, works testing, works finishing, supply, delivery, off-loading, storage, installation, site finishing, preservation, setting to work and site testing of the following; the main cable installation throughout the Station including the addition of the Radioactive Waste Building, earthing and lightning protection installation, cable supporting steelwork and carriers and glanding and termination of cables. The cabling installation comprises power distribution, control and instrumentation cabling including all the associated cabling accessories, terminal boxes and similar components. The way that the contract was set-up, awarded and is now being carried out is described. Planning and industrial relations have been key features of the contract. (Author)

  16. Survey report for fiscal 1999. Report on basic survey on joint implementation of installing coal moisture control (CMC) facilities

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of the COP3 joint implementation in fiscal 1999, a survey and discussions were given on installing coal moisture control (CMC) facilities in China. The possibility was discussed with the Jinan Steel Group Company and Shougang Company. The subject is a beehive coke furnace, in which coal containing 11% of water is sent to a fluidized bed dryer, and dried up to 6.6%. Stack gas in the coke furnace is used mainly as the drying heat source. The facility consists of a fluidized bed dryer, a dust collector, a coal transporter, and a stack gas recovering device. The energy saving effects made available to the above two companies are as remarkable as 19,868 tons/year and 12,189 tons/year, respectively, as converted to crude oil, and the greenhouse effect gas reduction effect as 61,476 tons/year and 37,715 tons/year, respectively. Because energy price is low in China, the investment recovery time period is set at six years or less as the limit for economic performance evaluation. As a result of the calculation, the recovery time periods for the above two companies were found to be 4.2 and 4.7 years, proving the CMC project highly promising. It is desired that the project will be moved forward once the issues of the fund raising and the discharge right of global warming gas are made clear. (NEDO)

  17. Case-control study of leukaemia and non-Hodgkin's lymphoma in children in Caithness near the Dounreay nuclear installation

    International Nuclear Information System (INIS)

    Urquhart, J.D.; Black, R.J.; Muirhead, M.J.; Sharp, Linda; Maxwell, Margaret; Jones, D.A.; Eden, O.B.

    1991-01-01

    A case-control study was performed to examine whether the observed excess of childhood leukaemia and non-Hodgkin's lymphoma in the area around the Dounreay nuclear installation is associated with established risk factors, or with factors related to the plant, or with parental occupation in the nuclear industry. No raised relative risks were found for prenatal exposure to X-rays, social class of parents, employment at Dounreay before conception or diagnosis, father's dose of ionising radiation before conception, or child's residence within 50 m of the path of microwave transmission beams. Results also proved negative for all lifestyle factors except an apparent association with use of beaches within 25 km of Dounreay. However, this result was based on small numbers, arose in the context of multiple hypothesis testing, and is certainly vulnerable to possible systematic bias. It was concluded that the raised incidence of childhood leukaemia and non-Hodgkin's lymphoma around Dounreay cannot be explained by paternal occupation at Dounreay or by paternal exposure to external ionising radiation before conception. The observation of an apparent association between the use of beaches around Dounreay and the development of childhood leukaemia and non-Hodgkin's lymphoma might be an artefact of multiple testing and influenced by recall bias. (author)

  18. Control of the Saclay CEA's base nuclear installations - Inspection n. INS-2010-CEASAC-0006 31 May 2010-4 June 2010 - Safety management

    International Nuclear Information System (INIS)

    2010-01-01

    This document reports an inspection dedicated to safety management, and performed by the ASN (the French Nuclear Safety Authority) on several nuclear installations present on the CEA's Saclay site. The inspected installations have been the INBs (base nuclear installations) number 35 (STEL), 40 (Osiris), 49 (LHA), 50 (LECI), 77 (Poseidon) and 101 (Orphee), and four departments (CCSIMN, USL2TI, SP2S and DANS) involved in safety or in charge of it. The report describes the requested corrective actions about the quality of the internal diagnosis, about the follow-up of actions and directives, about internal authorizations, about the follow-up of commitments, about second level control, about the management of the return on experience, about interesting events, about the control of subcontractors. Some additional information requests are also formulated

  19. Ultrasonic testing of canning tubes in stainless steel of the EL 4 reactor; Controle par ultrasons des tubes de gaine en acier inoxydable du reacteur EL 4

    Energy Technology Data Exchange (ETDEWEB)

    Prot, A; Monnier, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    From all the methods possible for controlling thin cans the one chosen, for numerous reasons, vas that making use of ultrasonic techniques. A method has been developed which should make it possible to carry out a rapid and efficient industrial control of canning tubes, The reasons for the choice of the ultrasonic method are given in detail, together with the principles of the method and the actual control parameters. In the present state of our research, it should be possible to control at least 50 000 tubes a year. Improvements brought about in the details of the control technique itself should make it possible to increase this rate considerably. (authors) [French] Parmi toutes les methodes possibles de controle des gaines minces, le procede retenu pour de multiples raisons a ete celui faisant appel a la technique des ultrasons. Une methode a ete mise au point qui doit permettre un controle industriel rapide et efficace des tubes de gaine. Sont exposes en detail, les raisons du choix de la methode par ultrasons, les principes de cette methode et les parametres du controle proprement dit. Dans l'etat actuel de nos etudes la cadence devrait permettre le controle de 50000 tubes par an au minimum. Des ameliorations de detail portant sur la technique de controle elle-meme, doivent permettre d'accelerer tres notablement cette cadence. (auteurs)

  20. Leap Motion Gesture Control With Carestream Software in the Operating Room to Control Imaging: Installation Guide and Discussion.

    Science.gov (United States)

    Pauchot, Julien; Di Tommaso, Laetitia; Lounis, Ahmed; Benassarou, Mourad; Mathieu, Pierre; Bernot, Dominique; Aubry, Sébastien

    2015-12-01

    Nowadays, routine cross-sectional imaging viewing during a surgical procedure requires physical contact with an interface (mouse or touch-sensitive screen). Such contact risks exposure to aseptic conditions and causes loss of time. Devices such as the recently introduced Leap Motion (Leap Motion Society, San Francisco, CA), which enables interaction with the computer without any physical contact, are of wide interest in the field of surgery, but configuration and ergonomics are key challenges for the practitioner, imaging software, and surgical environment. This article aims to suggest an easy configuration of Leap Motion on a PC for optimized use with Carestream Vue PACS v11.3.4 (Carestream Health, Inc, Rochester, NY) using a plug-in (to download at https://drive.google.com/open?id=0B_F4eBeBQc3yNENvTXlnY09qS00&authuser=0) and a video tutorial (https://www.youtube.com/watch?v=yVPTgxg-SIk). Videos of surgical procedure and discussion about innovative gesture control technology and its various configurations are provided in this article. © The Author(s) 2015.

  1. ETUDE DE LA DISTRIBUTION DES CATIONS ECHANGEABLES

    African Journals Online (AJOL)

    SEI Joseph

    programme d'installations minières pour l'exploitation de l'or et du manganèse, intéressant des emprises foncières importantes. ... pour maitriser les risques liés aux sols pollués, lesquels peuvent conduire à des effets négatifs sur le long terme Meusy, & Giorni .... kaolinite et de type bentonite industrielle (SFBD). Le pH des ...

  2. Nouvelle application de control des cavités 200 MHz RF du PS (CERN)

    CERN Document Server

    Cotte, D

    2011-01-01

    Le système Radio Fréquence (RF) 200MHz du PS est un outil essentiel pour la préparation des faisceaux haute intensité du PS. Dans l’anneau PS on trouve 6 cavités 200 MHz utilisées pour contrôler : • l’émittance longitudinale des « bunches » • le processus de « Rebunching » du faisceau avant de l’envoyer au SPS. Chaque cavité est pilotée par des événements appelés « timing » et suit une fonction de tension programmée. Cependant, l’électronique utilisée pour piloter les cavités 200 MHz du PS est obsolète et sa fiabilité non garantie pour cause du manque de pièces de rechange. Ce document décrit le fonctionnement du nouveau programme d’application qui fait abstraction de l’ancienne matrice hardware. Elle suit les recommandations décrites dans l’étude d’une nouvelle structure pour le système RF 200MHz du PS. [1

  3. Radiological follow-up of the environment of the G.I.P. CYCERON of Caen - year 2005 - 2006 - assessment 2007; Suivi radiologique de l'environnement des installations du GIP CYCERON de Caen - annee 2005 - 2006 - bilan 2007

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    The present study answers at the request of the Inspection of the classified installations to see the operator of the G.I.P. Cyceron setting up a plan of environmental radiological surveillance around its installations and including, at a minimal level, the following data: Measures of radioactivity on representative biological indicators and measures of dose rate in the environment close to installations in functioning. Further to the radiological assessment of the terrestrial environment of the G.I.P. Cyceron installations realized at the end of 2003, within the framework of a project of the installations extension, the A.C.R.O. was again required for the implementation of this radiological surveillance for year 2005. The first purpose is to supply elements of appreciation about the impact of these installations on environment and persons. This evaluation participates in radiation protection and allows to make sure that the G.I.P. operator respects the required regulatory thresholds. (N.C.)

  4. Border installations

    International Nuclear Information System (INIS)

    Lenaerts, K.

    1988-01-01

    This chapter highlights the legal problems raised by the concept of a border installation. Using the Cattenom nuclear power plant as an example, the author describes the different stages of the legal conflict raised by construction of the plant and analyses the relationship between French administrative law and some provisions of the Euratom Treaty. Based on the Treaty, the Community institutions have adopted directives to strengthen inter-State co-operation and consultation between neighbouring countries. He observes that these principles of co-operation, consultation and vigilance already exist in public international law; however, international case law has not yet made it possible to establish the strict liability of the constructing state in case of a nuclear accident (NEA) [fr

  5. Food Irradiation Research and Pilot Facilities in Operation or Planned in India; Recherches sur l'irradiation des Denrees Alimentaires et Installations Pilotes en Service ou a l'Etude en Inde; Izuchenie oblucheniya pishchevykh produktov' i dejstvuyushchie'i zaplanirovannye opytnye ustanovki v Indii; Irradiacion de Alimentos en la India: Investigaciones y Plantas Piloto en Servicio o en Proyecto

    Energy Technology Data Exchange (ETDEWEB)

    Kumta, U. S.; Sreenivasan, A. [Atomic Energy Establishment Trombay, Bombay (India)

    1966-11-15

    temperature ambiante (25-28 Degree-Sign C). Differents aspects de ce procede ont ete etudies, en particulier la dose de rayonnements admissible, l'effet concomitant de l'acide sorbique, les ameliorations de la qualite des produits au moyen d'autres traitements physiques et chimiques et le type d'emballage. En combinant l'irradiation a faibles doses (0,1 et 0,2 Mrad) et l'utilisation d'emballages enduits d'acide sorbique, il est possible de retarder d'environ 20 jours, a la temperature ambiante, l'apparition dans les fromages de moisissures et d'alterations de la saveur par oxydation. On a etudie les effets nuisibles des rayonnements sur les proteines du poisson en vue de determiner notamment le degre de scission et d'aggregation, l'effet de dedoublement et la mobilite electrophoretique. L'utilisation des rayonnements pour la desinsection des cereales et la prolongation de la duree de conservation du pain a donne des resultats encourageants. On etudie les effets de l'irradiation sur les composants et les qualites nutritives du ble. Le memoire decrit les installations d'irradiation en service et a l'etude. Le laboratoire d'irradiation et de traitement des'denrees alimentaires, qui sera bientot termine, contiendra un irradiateur au cobalt-60 pour produits empaquetes (100 000 Ci), un irradiateur portatif au cobalt-60 pour cereales (28 000 Ci) et des installations annexes de laboratoire pour l'analyse, la recherche et le traitement. L'irradiateur pour produits empaquetes doit avoir une capacite de 45 kg/h sous 0,5 Mrad et l'irradiateur portatif pourra traiter 225 kg de cereales a l'heure, sous 15 krad. (author) [Spanish] Se ha estudiado el empleo de las radiaciones gamma de una fuente de cobalto-60 para: a) retrasar la maduracion de ciertas frutas tropicales; b) esterilizar frutas y verduras, en combinacion con un tratamiento termico moderado; c) prolongar el periodo de almacenamiento de frutas semidesecadas; d) inhibir la germinacion de patatas y cebollas. Se han evaluado las

  6. Detection of {alpha} particles using semiconductors. Application to the control of plutonium extraction; Detection des particules {alpha} par semiconducteurs application au controle de l'extraction du plutonium

    Energy Technology Data Exchange (ETDEWEB)

    Tanguy, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-03-01

    A study is made of a particles produced by thick sources, using either diffused junction or surface barrier semiconductor detectors for controlling continuously the plutonium extraction process. For this, a presenting apparatus is described in which the solutions to be analyzed flow in contact with the detector protected by a thin mica membrane. A method is described which gives a precise recording of the spectra and which thus allows the separation of two or more {alpha} emitters present in the same solution. This method has been applied to the measurement of {sup 239}Pu in the the presence of {sup 241}Am with an accuracy of {+-}5 per cent. In the second part of the report is considered the detection of plutonium in solutions of {beta} - {gamma} emitting fission products. Pile-up is reduced by using a fast amplification chain associated to totally depleted thin detectors. Under these conditions a few mg of {sup 239}Pu can be detected in solutions of fission products having an activity of 100 curies/liter. A method is given for discriminating {alpha} and {beta} particles, it is based on the difference in the collection times for the charges liberated by these particles in the detector. (author) [French] On etudie la detection de particules {alpha} issues de sources epaisses par detecteurs semiconducteurs a jonction diffusee ou a barriere de surface pour le controle continu du procede d'extraction du plutonium. A cet effet on decrit un appareil presentateur dans lequel les solutions a analyser circulent au contact du detecteur protege par une membrane mince de mica. On decrit une methode qui permet par le trace precis des spectres de separer deux ou plusieurs emetteurs {alpha} presents dans une meme solution. Cette methode a ete appliquee a la mesure du {sup 239}Pu en presence de {sup 241}Am avec une precision de {+-} 5 pour cent. Dans la deuxieme partie on traite de la detection du plutonium dans des solutions de produits de fission emetteurs {beta} and {gamma}. On

  7. Logistics of LEP installation

    International Nuclear Information System (INIS)

    Genier, C.; Capper, S.

    1988-01-01

    The size of the LEP project, coupled with the tight construction schedules, calls for organized planning, logistics, monitoring and control. This is being carried out at present using tools such as ORACLE the Relational Database Management System, running on a VAX cluster for data storage and transfer, micro-computers for on-site follow-up, and PC's running Professional ORACLE, DOS and XENIX linked to a communications network to receive data feedback concerning transport and handling means. Following over 2 years of installations, this paper presents the methods used for the logistics of installation and their results

  8. Existence conditions of optimal trajectories in dynamic control processes; Conditions d'existence de trajectoires optimales des processus dynamiques commandes

    Energy Technology Data Exchange (ETDEWEB)

    Bonnemay-Juricek, L. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-07-01

    The existence of solutions in the optimal control problems with free endpoints is studied in this report and existence conditions are established without the usual assumption that the control region is convex. Furthermore the results, in order to be of some utility in physical applications, are expressed only by means of conditions on the parameters defining the system. (author) [French] Ce rapport etudie l'existence de solutions optimales dans les problemes de commande ou le point terminal est libre et ou la duree de l'evolution du systeme a optimiser est connue. Des conditions d'existence y sont formulees sans recourir a l'hypothese usuelle de convexite du domaine des valeurs des commandes. De plus on a cherche a rendre utilisables les resultats en ne faisant porter les conditions que sur les parametres directement accessibles du systeme. (auteur)

  9. Model-Based Throttle Control using Static Compensators and Pole Placement Commande des gaz basée sur un modèle utilisant des compensateurs statiques et un placement de pôles

    Directory of Open Access Journals (Sweden)

    Thomasson A.

    2011-10-01

    Full Text Available In modern spark ignited engines, the throttle is controlled by the Electronic Control Unit (ECU, which gives the ECU direct control of the air flow and thereby the engine torque. This puts high demands on the speed and accuracy of the controller that positions the throttle plate. The throttle control problem is complicated by two strong nonlinear effects, friction and limp-home torque. This paper proposes the use of two, simultaneously active, static compensators to counter these effects and approximately linearize the system. A PID controller is designed for the linearized system, where pole placement is applied to design the PD controller and a gain scheduled I-part is added for robustness against model errors. A systematic procedure for generating compensator and controller parameters from open loop experiments is also developed. The controller performance is evaluated both in simulation, on a throttle control benchmark problem, and experimentally. A robustness investigation pointed out that the limp-home position is an important parameter for the controller performance, this is emphasized by the deviations found in experiments. The proposed method for parameter identification achieves the desired accuracy. Au sein des moteurs à allumage commandé modernes, les gaz sont régulés par le boîtier de commande électronique (ECU; Electronic Control Unit, qui permet la régulation directe par l’ECU du flux d’air et ainsi du couple moteur. Cela conduit à des exigences élevées quant à la vitesse et à la précision du régulateur qui positionne le papillon des gaz. Le problème de commande des gaz est compliqué par deux forts effets non linéaires, le frottement et le couple de mode de secours (“limp-home”. Cet article propose l’utilisation de deux compensateurs statiques, actifs simultanément, pour contrer ces effets et linéariser approximativement le système. Un régulateur PID est conçu pour le système linéarisé, où un

  10. Risks control at the Cea: presentation of the third annual evaluation; Maitrise des risques au CEA: presentation du troisieme bilan annuel

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    This presentation aims to define the main topics of the risks control which some evolutions occurred in 2005. It concerns the environmental impact, the occupational risks, the hazardous materials transport, the site and installations protection, the installation safety, the emergency situations and, the audits and the juridical protection. (A.L.B.)

  11. Contraintes organisationnelles et gestion des risques en milieu ouvert : l’activité des monteurs installateurs de structures de fête Organizational constraints and risk management in an open environment: the activity of festival equipment erectors and installers Exigencias organizacionales y gestión del riesgo en lugares abiertos : La actividad de los montadores instaladores de estructuras de fiestas foráneas

    Directory of Open Access Journals (Sweden)

    Valérie Zara-Meylan

    2006-05-01

    Full Text Available Dans cet article, nous analysons l’activité des monteurs installateurs de structures de fête, agents d’une collectivité territoriale dans une grande ville. L’objectif est de mettre en évidence, dans ce type de système ouvert, les contraintes organisationnelles dues à la multiplicité des niveaux de décision et des réseaux d’acteurs ayant chacun leurs objectifs spécifiques. Ces contraintes ont un coût pour les opérateurs, en particulier en ce qui concerne les risques encourus.Après avoir montré les limites de la gestion verticale des risques, les régulations individuelles et collectives mises en place dans les équipes dans le but de gérer les risques sont analysées du point de vue de l’articulation des rôles des anciens et des novices dans le processus d’action, dans plusieurs situations.La méthodologie employée associe à l’analyse in situ des questionnaires et des tableaux de bord. Elle permet de mettre en évidence des situations critiques occasionnées par les interventions de multiples acteurs, en amont des chantiers et sur les sites. Ces intervenants perturbent la gestion horizontale des risques assurée par les anciens, les conduisant à faire des compromis, souvent au détriment de leur santé.In this article, we analyze the work activity of festival equipment erectors and installers in a large city local authority. The purpose is to identify, in this type of open system, the organizational constraints caused by the many decision levels and networks of actors with their own specific objectives. These constraints have a cost for the operators, especially in terms of occupational risks.After showing the limitations of " vertical " risk management, the individual and collective regulations that are implemented in the teams in order to manage the risks are analyzed from the standpoint of the articulation of older workers’ and novices’ roles in the action process, in several situations.The methodology

  12. 30 CFR 57.4504 - Fan installations.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Fan installations. 57.4504 Section 57.4504... Control Installation/construction/maintenance § 57.4504 Fan installations. (a) Fan houses, fan bulkheads... of combustible materials, except installed wiring, ground and track support, headframes, and direct...

  13. SOL-PAC: Integrated solar heating and heat pump systems for refurbished buildings - Performance analysis; SOL-PAC: analyse des performances du couplage d'une pompe a chaleur avec une installation solaire thermique pour la renovation - Rapport final

    Energy Technology Data Exchange (ETDEWEB)

    Citherlet, C.; Bony, J.; Nguyen, B.

    2008-07-01

    The purpose of this study is to evaluate the energetic and economic performances of various types of brine/water heat pumps coupled with a fan coil fitted with solar collectors. Different indicators such as the annual coefficient of performance or the electricity consumption have been compared between the different analysed systems. The optimization of the energy control system and energy storage was investigated in order to reduce the operation time of the fan coil. This study has been performed using the TRNSYS computerized simulation package. The icing of the fan coil as well as its defrosting cycles could not been taken into account within the framework of this project, because of a lack of a numerical model. At current electricity prices, the most economical solution remains the heat pump without solar collectors. However, from an energy point of view, the annual overall coefficient of performance of the installation may be improved by 15 to 36%, depending on the climate, thanks to the coupling with solar collectors. (author)

  14. Manual instructivo de instalación y control de prótesis totales Instructive manual of installation and control of total prostheses

    Directory of Open Access Journals (Sweden)

    Marcia Hortensia Corona Carpio

    2007-12-01

    Full Text Available Se realizó un estudio de la literatura con el objetivo de describir el paso clínico de instalación y control de prótesis total, durante el período comprendido de enero a mayo del 2005 en la Clínica Estomatológica Provincial Docente de Santiago de Cuba. Se abordaron diversos aspectos, definición de conceptos, así como todo el proceder clínico, instrucciones al paciente y consejo s a los portadores de prótesis. Se enfatizó en el paciente geriátrico, destacándose que precisamente este paso es el indicado para eliminar los defectos evidentes y donde el paciente adquiere el hábito de utilizarlos y el organismo de aceptarlo.A literature study was conducted aimed at describing the clinical step of installation and control of total prosthesis at the Provincial Teaching Dental Clinic of Santiago de Cuba from January to May, 2005. Diverse aspects were dealt with, as well as the definition of concepts, the whole clinical procedure, instructions to the patients and advises to prosthesis wearers. Emphasis was made on the geriatric patient, and it was stressed that this step is the indicated to eliminate the evident defects, and where the patient acquires the habit to use them and the body to accept them.

  15. Some particular aspects of control in nuclear power reactors; Conception de la surete en france et influence des imperatifs de surete sur la conception des reacteurs

    Energy Technology Data Exchange (ETDEWEB)

    Vathaire, F de; Vernier, Ph; Pascouet, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    This paper reviews the experience acquired in France on the question, of reactor safety. Since a special paper is being presented on reactors of the graphite gas type, the safety of the other types studied in France is discussed here: - heavy water-gas reactors, - fast neutron reactors, - water research reactors of the swimming-pool and tank types. The safety rules peculiar to the different types are explained, with emphasis on their influence on the reactor designs and on the power limits they impose. The corresponding safety studies are presented, particular stress being placed on the original work developed in these fields. Special mention is made of the experimental systems constructed for these studies: the reactor CABRI, pile loop for depressurization tests, loops outside the pile, mock-ups etc. (authors) [French] La presente communication propose une synthese de l'experience acquise en France en matiere de surete des reacteurs. Les reacteurs de la filiere graphite-gaz faisant l'objet d'une communication particuliere, on examine ici la surete des autres types de reacteurs etudies en France: - reacteurs eau lourde-gaz, - reacteurs a neutrons rapides, - reacteurs de recherche a eau des types piscines et tank. Les imperatifs de surete propres aux differentes filieres sont developpes, en mettant l'accent sur leur influence sur la conception des reacteurs et sur les limitations de puissance qu'ils entrainent. Les etudes de surete correspondantes sont presentees, en insistant plus particulierement sur les travaux originaux developpes dans ces domaines. On indique notamment les moyens d'essais qui ont ete construits pour ces etudes: le reacteur CABRI, boucle en pile pour essais de depressurisation, boucles hors pile, maquettes, etc. (auteurs)

  16. Gamma Monitoring of Land Surfaces; Controle Gamma des Surfaces Terrestres; 0413 0410 041c 041c 0410 - 0414 ; Control de la Actividad Gamma en la Superficie del Terreno

    Energy Technology Data Exchange (ETDEWEB)

    Ophel, I. L.; Jones, A. R. [Environmental Research and Radiation Dosimetry Branch, Division of Biology and Health Physics, Atomic Energy of Canada Limited, Chalk River, ON (Canada)

    1960-07-01

    Rapid monitoring of land surfaces is useful in delineating the area affected by an accident involving airborne contamination or detecting long-term contamination of the environment. A rugged monitor capable of making a continuous record when carried on a vehicle has been used for carrying out a pre-operational survey of the area surrounding the site of the NPD power reactor near Chalk River. It consists of an anthracene crystal {gamma}-ray detector with a photomultiplier, pulse-amplifier, counting-rate circuit, DC amplifier, 1-mA recorder train. This equipment weighs 28 kg and is mounted with two bolts on the bumper of a jeep. It can be dismounted and set up on a tripod at the same height above the ground. The mercury batteries are kept inside the vehicle. The circuitry is transistorized. A jig is fitted to carry a standard radium calibration source. The instrument is insensitive to cosmic radiation, and when the vehicle was driven at 16 km/h readings were 80% of those obtained if the counter was stationary. A road survey of the NPD reactor area, with readings also taken at fixed check points 100 m from the roadway and 3.2 km apart, showed that the recorded background radiation on the roads was very uniform, averaging 6 {mu}r/h. Check-point readings varied from 4.5 to 7.0 {mu}r/h. (author) [French] Un controle rapide des surfaces terrestres est utile pour delimiter la zone contaminee a la suite d'un accident ayant provoque une pollution radioactive de l'atmosphere, ou pour deceler une contamination a long terme du milieu ambiant. On a utilise un appareil tres resistant, capable d'assurer un enregistrement continu lorsqu'il est autoporte, et l'on a fait un controle de la zone entourant l'emplacement du reacteur de puissance NPD, pres de Chalk River, avant la mise en service de l'installation. L'appareil se compose d'un detecteur - cristal d'anthracene, photomultiplicateur et amplificateur - et d'un dispositif de mesure et d'enregistrement - amplificateur a courant

  17. Dome load control and crane land path evaluation for Tank 241-SY-101 during hydrogen mitigation pump removal and installation

    Energy Technology Data Exchange (ETDEWEB)

    Weis, M.P.; Lawler, D.M.

    1994-08-01

    This report revisits and consolidates two analyses previously performed for the installation of the Hydrogen Mitigation Pump (HMT) pump. The first report determines, as a function of the crane-imposed dome load, the point to which the crane can encroach into the exclusion zone without exceeding the 50-ton limit. The second performs a load evaluation for the crane and the components in the load path (crane lift accessories and pump). In doing so, it determines the weakest component in the load path and the effect of this component on the allowable encroachment distance. Furthermore, the second report sets operational limits on the allowable load decrease (unload) during installation in the event the pump sticks in the riser. The analysis presented here expands on the latter subject by setting an operational limit on the amount of allowable load increase (overload) during pump removal in the event the pump sticks in the riser.

  18. Ministerial Decree of 30 March 1978 on the exclusion of nuclear installations from the application of the requirements on combustion control

    International Nuclear Information System (INIS)

    1978-01-01

    This Decree was made by the Italian Minister for Industry, Commerce and Crafts; it lays down that nuclear installations governed by Act No. 1860 of 31 December 1962 on the Peaceful Uses of Nuclear Energy and by Presidential Decree No. 185 of 13 February 1964 on Radiation Protection and excluded from the scope of are Royal Order No. 824 of 12 May 1927 on combustion control. (NEA) [fr

  19. Time presses for the installation of a central controller [in the energy supply industry]. Strategic re-orientation of the present system

    International Nuclear Information System (INIS)

    Van den Berg, R.J.; Van Essen, M.; Meulmeester, P.; Olde Rikkert, B.

    2007-01-01

    The installation of a so-called central controller for the electric power industry has a number of advantages for stakeholders in the energy market: improving the exchange of information between energy utilities, save costs by setting up central registers for connections, meters, measured data and central processes for e.g. reconciliation and management of measured data (in particular with regard to smart metering). As an example attention is paid to the NEMMCO-case (National Electricity Code Administrator) in Australia [nl

  20. Invasive Species Guidebook for Department of Defense Installations in the Delaware River Basin: Identification, Control, and Restoration

    Science.gov (United States)

    2009-06-01

    affects (NISC 2001). A key management objective on both national and installation levels must be prevention of invasive species introduction and...species (National Research Council 2002): ◘ Long flowering/ fruiting period, which increases seed production and dispersal. ◘ Ability to reach...mycorrhizal fungi that they rely on. NOTE: Garlic mustard may grow with native species that are similar in appearance, such as toothworts (Dentaria

  1. Construction of a fast differential thermal analysis apparatus; Realisation d'une installation d'analyse thermique differentielle rapide

    Energy Technology Data Exchange (ETDEWEB)

    Vernois, G. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1964-10-15

    The author analyzes the various possibilities of DTA as well as conventional installation set-ups. He shows that by varying simultaneously the heating rate and the size of the samples it is possible to obtain very similar thermo-grams. He shows the advantages of using fast heating rates and proposes a type of oven and types of crucible which allow heating rates of over 1 deg. per second, rapid manipulation, a controlled atmosphere (from a vacuum up to high pressures) and forced cooling. He gives details of research carried with this type of installation showing the quantitative nature of the analyses and, as an example, studies the influence of a grinding on the qualitative and quantitative results. (author) [French] L'auteur analyse les differentes possibilites de l'ATD ainsi que les schemas classiques des installations. Il montre qu'en jouant simultanement sur la vitesse de chauffe et les dimensions des echantillons on peut ne pas modifier beaucoup l'allure des thermogrammes. Il fait ressortir l'interet de grandes vitesses de chauffe et propose un type de four et des creusets permettant des vitesses de chauffe superieures a 1 deg. par seconde, une manipulation rapide, le controle de l'atmosphere (du vide jusqu'a de hautes pressions) et un refroidissement force. Il presente une etude realisee avec une telle installation montrant le caractere quantitatif des analyses et comme exemple, etudie l'influence du broyage sur les resultats qualitatifs et quantitatifs. (auteur)

  2. Control apparatus for radioactive contamination of the filtering device adapted on the protection apparatus of the respiratory tracts (1961); Appareil de controle de la contamination radioactive des dispositifs filtrants adaptes sur les appareils de protection des voies respiratoires (1961)

    Energy Technology Data Exchange (ETDEWEB)

    Dujancourt, S; Roche, J [Commissariat a l' Energie Atomique, Centre de Production de Plutonium, Marcoule (France). Centre d' Etudes Nucleaires

    1961-07-01

    That apparatus allows to detect and localize the radioactive contamination of the mask cartridge, for alpha, beta and gamma radiations, concerning external contamination, and for beta and gamma radiations, concerning internal contamination. It consists of lead coffin, in which the cartridge is inserted for control. Halogen counters are in contact with it. Operation conditions (Geiger or proportional) and their position on regard to the cartridge are controlled from outside. A sealer counts the pulses, given by the different counters. (authors) [French] Cet appareil permet de detecter et de localiser la contamination radioactive de cartouches filtrantes de masques, en {alpha}, {beta} et {gamma}, en ce qui concerne la contamination exterieure, et en {beta} et {gamma} en ce qui concerne la contamination interieure. Il est constitue par un coffre en plomb dans lequel est introduite la cartouche a controler. Des compteurs halogenes sont au contact de celle-ci. Leur regime de fonctionnement (Geiger ou proportionnel) et leur position par rapport a la cartouche sont commandes de l'exterieur. Une echelle de comptage compte les impulsions donnees par les differents compteurs. (auteurs)

  3. The control of the radioactive pollution of milk (1962); Comment concevoir une surveillance des pollutions radioactives du lait (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Michon, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-07-01

    Milk, an essential foodstuff, is the object of a supervision and vigilant controls governed by numerous laws which protect its commercial and sanitary qualities. The development of the use of nuclear energy poses and will pose new problems of hygiene and the milk should benefit from controls concerning its possible contamination. Grass-eating animals are particularly subjected to radioactive contaminations and the milk which they produce does not escape contamination because of of its saline composition and of the particular metabolism of the mammary gland. As a result, milk is a contamination integrator and its analysis makes it possible to detect radioelements which can only be detected with great difficulty in an average size plant sample. (author) [French] Le lait, aliment essentiel, fait l'objet d'une surveillance et de controles vigilants regis par de nombreux textes legislatifs qui protegent ses qualites marchandes et sanitaires. Le developpement de l'utilisation de l'energie nucleaire pose et posera de nouveaux problemes d'hygiene et le lait doit beneficier de controles portant sur sa pollution radioactive eventuelle. Les, animaux herbivores sont particulierement exposes aux contaminations radioactives et les laits qu'ils produisent, du fait de leurs compositions salines et du metabolisme particulier de la glande mammaire, n'echappent point aux pollutions. De ce fait, le lait est un integrateur de contamination et son analyse permet de retrouver des radioelements que l'on ne decele qu'avec beaucoup de difficultes sur un echantillon vegetal de taille moyenne. (auteur)

  4. Radioactive Waste Control at the United Kingdom Atomic Energy Research Establishment, Harwell; Traitement des Dechets Radioactifs au Centre de Recherche sur l'Energie Atomique de Harwell; 041a 041e 041d 0422 0420 041e 041b 042c 0417 0410 0423 0414 ; Control de Desechos Radiactivos en el A.E.R.E., Harwell

    Energy Technology Data Exchange (ETDEWEB)

    Burns, R. H. [United Kingdom Atomic Energy Authority (United Kingdom)

    1960-07-01

    The paper outlines the present practices in the control and treatment of radioactive wastes at Harwell. The large-volume, low-level active liquid effluent is treated by phosphate coagulation methods and, eventually, discharged to the River Thames. The medium-level wastes are segregated and undergo a two-stage chemical treatment followed by passage through columns of Vermiculite. The latter process has been found to be effective in removing radoicaesium, which is not dealt with efficiently by the precipitation methods used. Liquid wastes with a high- activity content are stored and a new plant, incorporating chemical treatment, ion exchange and evaporation, is being installed. The chemical sludges formed in the treatment processes are dumped at sea after de-watering by filtration. The contaminated solid waste is either stored or disposed of at sea. It is important to reduce the volume as much as possible and the methods employed include pressure baling, melting and incineration of combustible matter. Small quantities of activity are discharged to the atmosphere through exhaust stacks. The cleaning of this discharge air is commonly achieved by the use of high-efficiency filters or liquid scrubbing systems. Regular stack monitoring is carried out and this is backed up by a comprehensive district sampling programme. (author) [French] L'auteur decrit les methodes de controle et de traitement des dechets radioactifs qui sont appliquees au Centre de Harwell. Le volume considerable des effluents liquides de faible activite est traite par des methodes de coagulation au moyen des phosphates, puis evacue dans la Tamise. Apres separation, les dechets d'activite moyenne sont soumis a un traitement chimique en deux temps, avant de traverser des colonnes de Vermiculite. On a constate que ce dernier processus eliminait le radio- cesium, ce que les methodes de precipitation utilisees ne permettent pas de faire de maniere efficace. Les dechets liquides d'activite intense sont

  5. Application of transducers to the control of temperatures and of alternating and direct voltages (1962); Application des transducteurs a la regulation des temperatures et des tensions alternatives et continues (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Raoult, N [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1960-11-15

    The temperature regulator and the voltage regulators described have been studied with a view to conferring a high degree of safety to the apparatuses in which they are used. They make use almost exclusively of Transducers which are passive elements acting mainly in these apparatuses as amplifiers and which are entirely satisfactory, ensuring that the regulators studied keep their essential qualities i.e accuracy, reliability, stability and sensitivity. (author) [French] Le regulateur de temperature et les regulateurs de tension decrits ont ete etudies pour donner aux ensembles dans lesquels ils sont inseres une grande securite d'exploitation. Ils utilisent presque exclusivement comme constituants des TRANSDUCTEURS qui sont des elements passifs assurant principalement dans ces appareils une fonction d'amplification ou ils donnent entiere satisfaction en conservant aux regulateurs etudies leurs qualites essentielles qui sont: la precision, la fidelite, la stabilite et la sensibilite. (auteur)

  6. Materials Control in the Fabrication of Enriched Uranium Fuels; Controle des Matieres au Cours de la Fabrication des Combustibles a Base d'Uranium Enrichi; Uchet materialov pri izgotovlenii topliva na obogashchennom urane; Control de Materiales en la Elaboracion de Combustibles de Uranio Enriquecido

    Energy Technology Data Exchange (ETDEWEB)

    Cardwell, Jr., R. G. [Oak Ridge National Laboratory, Oak Ridge, TN (United States)

    1966-02-15

    measurement were successfully used where alloy fuel content was critical. Scrap handling had an important effect on the materials balance, by which fuel content was confirmed and good accountability was assured. Records and handling procedures, including batching and physical marking methods, were formulated in a manner that assisted the fabricator in criticality control. (author) [French] Grace aux efforts intenses qui ont ete accomplis au cours des 15 dernieres annees dans le domaine de la technologie des elements de combustible par le Laboratoire national d'Oak Ridge, il a ete possible d'etablir des methodes rationnelles de fabrication et de controle des combustibles eraichis, qui trouvent une iaige application dans la fabrication industrielle des elements de combustible a l'heure actuelle. Des techniques eprouvees de manipulation du combustible enrichi en alliages, en dispersion et sous forme d'oxyde en vrac ont ete mises au point et appliquees a l'etude et a la' fabrication des prototypes d'elements combustibles utilises pour le demarrage du reacteur d'essai de materiaux, du reacteur a protection constituee par la masse du ra- lentisseur ou reacteur piscine, du reacteur de puissance transportable construit pat V, du reacteur protection en tour, du reacteur expose a la Conference de Geneve, du reacteur a haut flux pour la production de radioisotopes et du reacteur experimental refroidi par un gaz. L'experience acquise est la base du present memoire qui traite essentiellement des problemes de controle des matieres qui se posent au cours de la fabrication de differents types d'elements de combustible a base d'uranium enrichi et montre comment ils ont ete resolus. Les objectifs principaux d'un systeme rationnel de controle des matieres sont les suivants: 1. reduire le plus possible le nombre des postes matiere a controler; 2. etablir des releves distincts pour chacune des phases principales des operations et les coordonner de maniere a pouvoir relever les ecarts avec un

  7. NRC Information Notice No. 92-01: Cable damage caused by inadequate cable installation procedures and controls

    International Nuclear Information System (INIS)

    Rossi, C.E.

    1993-01-01

    In June 1989, the Tennessee Valley Authority (TVA) removed the cables from a conduit in the reactor protection system of the Watts Bar Nuclear Plant, Unit 2, to inspect for damage. TVA selected this conduit in response to an employee's concern that a welding arc that struck the conduit in response to an employee's concern that a welding arc that struck the conduit during construction may have damaged cables in the conduit. When the cables were removed, TVA found significant damage in the insulation of some cables. This damage was not attributed to heat generated by the alleged welding arc. The damage was principally attributed to the pulling stresses exerted during the initial installation of the cables. Some of the cables had insulation removed down to the conductors. To assess the extent of cable damage and determine the scope of its investigation, TVA removed more cables from conduits that constituted the most difficult pulls (worst case) and found varying degrees of damage that it attributed to pulling stresses. To fill a conduit at Watts Bar, personnel used pull cords to pull more cables through the conduits over the top of existing cables. This practice is called ''pull-by.'' This practice can cause damage to the existing cables from the sawing action of the pull cords and the friction of cables as they are pulled over existing cables. TVA instituted programs to assess the adequacy of cable installation at all its nuclear facilities and take appropriate corrective actions. At Watts Bar, TVA replaced cables in conduits which exceeded a calculated threshold value of side wall bearing pressure (SWBP) and performed a high-potential (hi-pot) tests on a number of other cables in conduits with SWBP below the calculated threshold value

  8. Radioactive Waste Facilities at the Australian Atomic Energy Commission Research Establishment; Installations pour le Traitement des Dechets Radioactifs au Centre de Recherche de la Commission Australienne a l'Energie Atomique; 0423 0421 0422 0414 ; Dispositivos para Evacuacion de Desechos Radiactivos en el Centro de Investigaciones de la Australian Atomic Energy Commission

    Energy Technology Data Exchange (ETDEWEB)

    Berglin, C. L.W.; Keher, L. H.; Miles, G. L.; Wilson, A. R.W. [Australian Atomic Energy Commission Research Establishment, Lucas Heights, Sydney, NSW (Australia)

    1960-07-01

    This paper describes the facilities,which are being provided for the collection, treatment and disposal of radioactive wastes at Lucas Heights in relation to the estimated arisings. Low-activity effluent is divided into three types: (a) Sewage; (b) Trades waste, arising from reactor cooling tower blow-down and engineering workshops and other inactive areas; and (c) Effluent arising from laboratories and other active areas. The effluent treatment plant for the latter type of effluent consists essentially of mixing and alkali dosing tanks, a sludge-blanket clarifier (using a calcium- iron-phosphate process) and holding tanks. Methods of concentrating the sludge and of secondary treatment are at present being investigated and are discussed. The discharge formula and the expected dilution obtained in the Woronora river are discussed, together with a dilution experiment carried out in the tidal waters. It is proposed to bury all low-activity solid waste after baling where appropriate and the choice and location of the disposal area is discussed. A facility for the storage and disposal of highly active solid waste is discussed. It is proposed to evaporate and store the medium- and high-activity liquid waste. Details are given of the capital and operating costs of the Effluent Treatment Plant and other waste handling facilities. (author) [French] Le memoire decrit les installations que le Centre de Lucas Heights cree a l'heure actuelle, eu egard au developpement envisage'en matiere de rassemblement, de traitement et d'elimination des dechets radioactifs. Les' effluents de faible activite se divisent en trois categories: a) Eaux d'egout; b) Dechets industriels provenant de la tour de refroidissement du reacteur, des ateliers et d'autres zones non-actives; c) Effluents provenant des laboratoires et d'autres zones actives. L'usine affectee au traitement du dernier type d'effluents se compose essentiellement de malaxeurs, de bacs de dosage d'alcalis, d'un clarificateur d

  9. Radiological assessment of terrestrial environment of facilities of G.I.P. CYCERON from Caen - year 2003; Bilan radiologique de l'environnement terrestre des installations du GIP CYCERON de Caen - annee 2003

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    Concerning the gamma emitters, the only analysis on soils put in evidence the presence of cesium-137 ({sup 137}Cs), that does not come from the cyclotron functioning but from past man action as the Chernobylsk accident and the nuclear weapon tests in atmosphere. Independently of the functioning of the installation, we observe an increase of the ambient gamma radiation only near radioactive waste storage. It results of the storage of the former cyclotron elements. The induced increase is moderated because at 5 meters the values do not exceed the background noise. In relation with the functioning of the installation an increase of the ambient gamma radiation is noticed. Two causes are to considered: the release of radionuclides in atmosphere with gaseous effluents and the radiance of radiation sources inside the building. After the stopping of the installation (48 h at least), no increase of gamma radiation is observed. About the neutrons monitoring, the measures made during the cyclotron functioning, highlight the lack of significant overexposure around the blockhouse at the level of man, a very net increase of the ambient neutron radiation (about 20 times the background noise) exclusively on the roof of the blockhouse. (N.C.)

  10. The control of the radioactive pollution of milk (1962); Comment concevoir une surveillance des pollutions radioactives du lait (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Michon, G. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-07-01

    Milk, an essential foodstuff, is the object of a supervision and vigilant controls governed by numerous laws which protect its commercial and sanitary qualities. The development of the use of nuclear energy poses and will pose new problems of hygiene and the milk should benefit from controls concerning its possible contamination. Grass-eating animals are particularly subjected to radioactive contaminations and the milk which they produce does not escape contamination because of of its saline composition and of the particular metabolism of the mammary gland. As a result, milk is a contamination integrator and its analysis makes it possible to detect radioelements which can only be detected with great difficulty in an average size plant sample. (author) [French] Le lait, aliment essentiel, fait l'objet d'une surveillance et de controles vigilants regis par de nombreux textes legislatifs qui protegent ses qualites marchandes et sanitaires. Le developpement de l'utilisation de l'energie nucleaire pose et posera de nouveaux problemes d'hygiene et le lait doit beneficier de controles portant sur sa pollution radioactive eventuelle. Les, animaux herbivores sont particulierement exposes aux contaminations radioactives et les laits qu'ils produisent, du fait de leurs compositions salines et du metabolisme particulier de la glande mammaire, n'echappent point aux pollutions. De ce fait, le lait est un integrateur de contamination et son analyse permet de retrouver des radioelements que l'on ne decele qu'avec beaucoup de difficultes sur un echantillon vegetal de taille moyenne. (auteur)

  11. Radio-protection problems presented by iodine isotopes in nuclear fuel chemical treatment plants (1962); Les problemes de radioprotection poses par les isotopes de l'iode dans les installations de traitement chimique des combustibles (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Bouzigues, H; Scheidhauer, J; Messainguiral, L [Commissariat a l' Energie Atomique, Centre de Production de Plutonium, Marcoule (France). Centre d' Etudes Nucleaires

    1962-07-01

    The origin of radio-iodine and the conditions in which it is liberated are given. The authors review the question of the risks associated with the presence of this radioelement In the atmosphere. Finally a method is proposed for the trapping and rapid measuring of the iodine in the vapour form, applicable to radioprotection. (authors) [French] L'origine et les conditions de liberation du radioiode sont exposees. Les auteurs font le point de la question des risques associes a la presence de ce radioelement dans l'atmosphere. Enfin, une methode de piegeage et de mesure rapide de l'iode a l'etat de vapeur applicable a la radioprotection, est proposee. (auteurs)

  12. Active flywheel control for hybrid vehicle; Compensation active des pulsations de couple dans un vehicule hybride

    Energy Technology Data Exchange (ETDEWEB)

    Tnani, S.; Coirault, P.; Champenois, G. [Ecole Superieure d' Ingenieurs, Lab. d' Automatique et d' Informatique Industrielle, 86 - Poitiers (France)

    2005-01-01

    In the paper, the authors propose a novel control strategy of torque ripple on hybrid vehicle. The combustion engine ripple's are reduced by using an active filter and an AC machine which is mounted on the crank-shaft to generate on inverse torque sequence. The control strategy is based on a multi-objectives state feedback synthesis. A complete modelling of the hybrid propulsion of the vehicle is achieved. Simulation results highlight the interest of the control scheme. (authors)

  13. New purchase conditions by EDF, of the electrical power produced by the energy valorization installations of domestic wastes and assimilated; Nouvelles conditions d'achat par EDF de l'electricite produite par les installations de valorisation energetique des dechets managers et assimiles

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-05-01

    The State Secretary for the Industry, C. Pierret, approved the new purchase conditions by EDF, concerning the electric power, produced by the installations of domestic wastes energy valorization. This action is in agreement with the energy policy. The purchase conditions are presented and commented. (A.L.B.)

  14. La mise en oeuvre des codes d'éthique par le control interne

    NARCIS (Netherlands)

    van der Elst, C.F.

    2014-01-01

    The real value of the internal control system lies in the animation of the ethical values in the organization. The integration of ethical risks in the internal control process enables the moving notions of ethical behaviour and accommodate the training and inducement programs of all employees

  15. Proposal for the award of a contract for the design, supply, installation and commissioning of a Heating, Ventilation and Air-Conditioning (HVAC) system for the computer room of the CERN Control Centre

    CERN Document Server

    2012-01-01

    Proposal for the award of a contract for the design, supply, installation and commissioning of a Heating, Ventilation and Air-Conditioning (HVAC) system for the computer room of the CERN Control Centre

  16. Nuclear Materials Management in Relation to Safety and Criticality Control: A Study of Non-Inherently Safe Systems; La Gestion des Matieres Nucleaires dans ses Rapports avec la Securite et le Controle de la Criticite; Etude des Systemes a Securite Non Inherente; Obrashchenie s yadernymi materialami s uchetom bezopasnosti i kontrolya za kritichnost'yu. izuchenie sistem dopolnitel'noj avarijnoj zashchity; La Administracion de Materiales Nucleares y sus Relaciones con la Seguridad y el Control de la Criticidad; Estudio de los Sistemas de Seguridad No Inherente

    Energy Technology Data Exchange (ETDEWEB)

    Fruchard, Y. [Commissariat a l' Energie Atomique, Marcoule (France)

    1966-02-15

    a securite inherente. Toutefois, les systemes a securite non inherente restent nombreux dans les installations nucleaires et le recours a l'une ou l'autre des deux premieres methodes devient necessaire. Ces methodes sont liees a la gestion des matieres nucleaires. Dans les installations ou sont manipulees de petites quantites de matieres fissiles, il est souvent possible d'assurer la securite nucleaire en admettant dans chaque salle une masse de matiere fissile inferieure a la masse ciritique minimale. Pour des installations plus importantes, un tel controle, qui repose entierement sur la gestion des matieres, devient impossible. L'auteur examine, dans le cas particulier d'une usine oe traitement de combustibles irradies par voie aqueuse (les combustibles sont a base d'uranium naturel), comment se presente la liaison entre gestion et securite nucleaire. Une telle usine comprend grossierement trois parties au point de vue du controle de la criticite: Dans la premiere partie, traitant des solutions assez diluees, le controle qui s'impose est celui de la concentration. Si ce controle est aise (analyse et compteurs neutrons), il est difficile de s'assurer qu'il ne se forme pas de depots: bien que l'experience ait montre qu'ils n'etaient pas tellement a craindre, le fait bien connu d'un bilan matieres deficitaire reste un souci en matiere de criticite. Dans cette partie, la gestion des matieres, encore imparfaitement realisee, est de premiere importance pour la securite. La deuxieme partie traite des solutions concentrees et des precipites humides. C'est le domaine de la geometrie sure. La gestion des matieres l'interesse moins directement mais reste un facteur de securite important (en cas d'intervention, de nettoyage des appareils, etc.). Un controle par la masse s'impose dans la troisieme partie qui traite des produits secs. La gestion ne presente pas de difficulte particuliere. A ce schema se superpose une partie moins spectaculaire mais qui sur le plan surete est de

  17. Preliminary study for the revitalisation of the 'Duersteller' small hydropower installation in Wetzikon, Switzerland; Vorstudie Kleinwasserkraftwerk J. Duersteler and Co AG Wetzikon ZH. Revitalisierungsvorhaben des Kraftwerkes mit seinen 80-jaehrigen Francis-Doppelturbinen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    This report for the Swiss Federal Office of Energy (SFOE) discusses the possibility of revitalising an 80-year-old, small industrial hydropower plant fitted with twin Francis turbines. The present situation and the condition of the turbines and their associated water channels are described and the hydrological data of the Aabach stream is presented. Details are given on the presently installed technical apparatus and the legal and ownership situation. Environmental and historical aspects are discussed. The economics of the proposed revitalisation project are discussed and possible restrictions that could be enforced by the authorities are looked at. The report is concluded with recommendations for further action.

  18. Comparison of the Economic Aspects of the Treatment and Storage of Fission Products from Installations Processing Irradiated Natural Uranium; Aspects Economiques Compares du Traitement et du Stockage des Produits de Fission Issus des Usines de Traitement de l'Uranium Naturel Irradie; Sravnitel'nye ehkonomicheskie aspekty obrabotki i khraneniya produktov deleniya, poluchaemykh na zavodakh po pererabotke obluchennogo prirodnogo urana; Aspectos Economicos Comparados del Tratamiento y del Almacenamiento de los Productos de Fision que Salen de las Plantas de Tratamiento de Uranio Natural Irradiado

    Energy Technology Data Exchange (ETDEWEB)

    Thiriet, L.; Lesur, P.; Giraud, R. [Commissariat a l' Energie Atomique, Paris (France); Wanlin, J. [Societe Saint-Gobain Techniques Nouvelles, Paris (France)

    1966-02-15

    The paper summarizes the main policies adopted for the management of fission product effluents and briefly describes the essential technical features of the stainless steel storage installations (in acid medium) used in France, giving a breakdown of the costs involved. The dependence of these costs on the activity of the solutions stored and on their heat release is shown. The second part of the paper discusses the cost of storage in terms of feasible tank size. The optimum size for such tanks and the rate at which they are placed in service are determined in relation to the characteristics of the fission products to be stored and to the respective capacities of the installations for processing irradiated natural uranium. It is shown that although storage costs depend on the assumptions made regarding the useful life of installations, rates of interest and operating costs, optimum policy decisions (as to size and rate of entry into service) are independent of these assumptions, being determined solely by the variation in the cost of tanks, according to size. These are the factors which enter into the optimized cost of storing these effluents indefinitely. In the third part, this method of indefinite storage is compared with other possibilities of fission product management, e.g. vitrification and separation of Cs and Sr. The paper discusses the economics of the various methods and summarizes some possible long-term solutions. (author) [French] Apres avoir rappele les principales politiques de gestion le plus souvent envisagees pour les produits de fission, le memoire decrit sommairement les caracteristiques techniques essentielles des installations de stockage en acier inoxydable (en milieu acide) utilisees en France et la structure des couts de ces installations. U montre la sensibilite de ces couts a l'activite des solutions stockees et a leur degagement de chaleur. Dans une deuxieme partie, les auteurs examinent leur cout de stockage, selon la taille des

  19. Elimination of voltage reversal in multiple membrane electrode assembly installed microbial fuel cells (mMEA-MFCs) stacking system by resistor control.

    Science.gov (United States)

    Kim, Bongkyu; Chang, In Seop

    2018-08-01

    Voltage reversal (VR) in series connection of multiple membrane electrode assembly installed microbial fuel cells (mMEA-MFC) is eliminated by manipulating the resistor control. Discharge test results collected from two mMEA-MFCs initially operated (designated as P1 and P2) confirm that the performance of P2 exceeds that of P1. Thus, driving P1 and P2 as serially stacked MFCs generate the VR in P1. Controlling the inserted resistor adjust the current production of P2 to maintain balance with P1, and the VR in P1 is eliminated in the operation of stacking mode. Thus, manipulating the internal resistance provide an applicable approach to suppress VR in the stacking of mMEA-MFCs system. Copyright © 2018 Elsevier Ltd. All rights reserved.

  20. Applicability of the Critical pathway analysis usually used for nuclear installations, to the control marine environment pollution by heavy metals

    International Nuclear Information System (INIS)

    Franca, E.P.; Pfeiffer, W.C.; Fiszman, M.; Lacerda, L.D. de

    1984-01-01

    The methodology of the controlling radionuclide releases from nuclear facilities by the critical pathway criteria, is given. The use of this methodology for the environmental impact studies for an industry that causes pollution is discussed. (M.A.) [pt

  1. Contribution to the detection of radioactivity as applied to regular testing and to protection; Contribution a la detection des rayonnements en vue du controle et de la protection

    Energy Technology Data Exchange (ETDEWEB)

    Fuhrmann,; Joffre,; Savouyaud, [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    1. The equipment which is at the disposal of teams carrying out tests, such as the Radiations Analysis section and the Radtivity Engineers section at the CEA, has been developed from apparatus designed for laboratory research. The result of this is that even when attempts have been made to make this equipment more robust and manageable, no effort has been made to adapt the equipment to exactly what is required for assuring protection against radioactivity. It has therefore been necessary for this section to exactly specify its requirements and to carry out itself a part of the work required for developing the most suitable material. 2. The most important problems concerned the analysis of the radioactivity and the fabrication of electronic equipment, which could be available cheaply on a large scale and be also as far as possible self supporting. 3. In the present paper we briefly describe our contribution to this subject and in particular: - the improvement of methods of {gamma} ray analysis which use photographic films; - the try out of a simple and cheap technique for the analysis and spectrography of {alpha} particles; - the utilisation of new electronic material: ionisation chamber counters, scintillators; - the development of special equipment for measuring the mean flux of particles which are emitted periodically in very short bursts. (author)Fren. [French] 1. Le materiel qui se trouve a la disposition des organismes de controle, tel le Service de Controle des Radiations et de Genie Radioactif au Commissariat a l'Energie Atomique, a ete concu a partir de materiels realises pour des experiences de laboratoire et, meme lorsqu'on a pense a le rendre plus robuste et plus maniable, on a generalement omis de l'adapter exactement aux besoins de la protection contre les radiations. Aussi ce Service a-t-il ete amene a preciser exactement ses besoins et a realiser lui-meme une partie des etudes necessaires a la mise au point d'un materiel mieux adapte. 2. Les

  2. Installation and working methods of a testing laboratory to establish a private control at the concrete plant (part 1

    Directory of Open Access Journals (Sweden)

    Haarmann, F.

    1973-03-01

    Full Text Available Not availableEl ''Control de Calidad'' puede considerarse tan importante, desde un punto de vista práctico, que unas instalaciones adecuadas para el control, tanto de la producción como de los productos acabados, representan una seguridad en la calidad de los productos y en el rendimiento de la empresa. Con la ayuda de algunos ejemplos, el presente trabajo muestra las posibilidades existentes para mantener la calidad del producto a un elevado nivel, empleando para ello instalaciones de control de calidad, aumentando, además, el rendimiento y reduciendo los costos innecesarios. En la segunda parte de este trabajo se describen ocho centros de control de calidad de grandes y pequeñas dimensiones y de acuerdo con la disposición de la figura 1. Seguidamente se hacen algunas observaciones críticas respecto a la adquisición de instalaciones para realizar un adecuado control. En un apéndice del trabajo se representan esquemáticamente unas instalaciones para el control de áridos, del hormigón fresco y del hormigón endurecido.

  3. Technical, economic, environmental and social follow-up of innovating farm-based small methanization plants: BIOGAZ PLUS - Report after a 12-month follow-up; Installation: EARL Guilbaud - Report after a 15-month follow-up; Installation: GAEC Des Buissons - Report after a 12-month follow-up

    International Nuclear Information System (INIS)

    Lalanne, Mathieu; Cordelier, Marine; Pouech, Philippe; Thual, Julien; Bastide, Guillaume; Faure, Benoit; Faure, Jean-Marie; Bousquet, Dominique; El Habti, Audrey; L'Heriau, Germain; Guianvarch, David; Farcy, Alexandre; Banville, Sandrine; Chauvin, Damien; Frederic, Sylvain; Haumont, Francois; Guilbaud, Gerard; Leroux, Yannick; Tronc, Jean-Sebastien; Menard, Anthony

    2015-08-01

    This document contains three follow-up reports, each concerning a small farm-based methanization unit. For each one, the report proposes a technical description (operation, provisional exploitation assessment, process principle and implementation, installed instrumentation), describes the status of production (noticed dysfunctions and identified causes, returns on experience), an operation assessment after 12 or 15 months in terms of biological performance (composition of input mixture, methane generation potential, organic load) and energetic performance (biogas, electric, thermal and energetic assessments), an assessment of environmental and social performance (time spent, energy efficiency, greenhouse gas assessment, integration of the installation within the farm, risk and pollution assessment), an economic assessment in terms of investment, of operating statements and of indicators of financial profitability. Results of composition measurements performed on input materials and digestates are provided

  4. Does des-acyl ghrelin improve glycemic control in obese diabetic subjects by decreasing acylated ghrelin levels?

    Science.gov (United States)

    Özcan, Behiye; Neggers, Sebastian J C M M; Miller, Anne Reifel; Yang, Hsiu-Chiung; Lucaites, Virginia; Abribat, Thierry; Allas, Soraya; Huisman, Martin; Visser, Jenny A; Themmen, Axel P N; Sijbrands, Eric J G; Delhanty, Patric J D; van der Lely, Aart Jan

    2014-06-01

    The objective of this study was to assess the effects of a continuous overnight infusion of des-acyl ghrelin (DAG) on acylated ghrelin (AG) levels and glucose and insulin responses to a standard breakfast meal (SBM) in eight overweight patients with type 2 diabetes. Furthermore, in the same patients and two additional subjects, the effects of DAG infusion on AG concentrations and insulin sensitivity during a hyperinsulinemic-euglycemic clamp (HEC) were assessed. A double-blind, placebo-controlled cross-over study design was implemented, using overnight continuous infusions of 3 and 10  μg DAG/kg per h and placebo to study the effects on a SBM. During a HEC, we studied the insulin sensitivity. We observed that, compared with placebo, overnight DAG administration significantly decreased postprandial glucose levels, both during continuous glucose monitoring and at peak serum glucose levels. The degree of improvement in glycemia was correlated with baseline plasma AG concentrations. Concurrently, DAG infusion significantly decreased fasting and postprandial AG levels. During the HEC, 2.5  h of DAG infusion markedly decreased AG levels, and the M-index, a measure of insulin sensitivity, was significantly improved in the six subjects in whom we were able to attain steady-state euglycemia. DAG administration was not accompanied by many side effects when compared with placebo. DAG administration improves glycemic control in obese subjects with type 2 diabetes through the suppression of AG levels. DAG is a good candidate for the development of compounds in the treatment of metabolic disorders or other conditions with a disturbed AG:DAG ratio, such as type 2 diabetes mellitus or Prader-Willi syndrome. © 2014 European Society of Endocrinology.

  5. Digital Full-Scope Simulation of a Conventional Nuclear Power Plant Control Room, Phase 2: Installation of a Reconfigurable Simulator to Support Nuclear Plant Sustainability

    Energy Technology Data Exchange (ETDEWEB)

    Ronald L. Boring; Vivek Agarwal; Kirk Fitzgerald; Jacques Hugo; Bruce Hallbert

    2013-03-01

    The U.S. Department of Energy’s Light Water Reactor Sustainability program has developed a control room simulator in support of control room modernization at nuclear power plants in the U.S. This report highlights the recent completion of this reconfigurable, full-scale, full-scope control room simulator buildout at the Idaho National Laboratory. The simulator is fully reconfigurable, meaning it supports multiple plant models developed by different simulator vendors. The simulator is full-scale, using glasstop virtual panels to display the analog control boards found at current plants. The present installation features 15 glasstop panels, uniquely achieving a complete control room representation. The simulator is also full-scope, meaning it uses the same plant models used for training simulators at actual plants. Unlike in the plant training simulators, the deployment on glasstop panels allows a high degree of customization of the panels, allowing the simulator to be used for research on the design of new digital control systems for control room modernization. This report includes separate sections discussing the glasstop panels, their layout to mimic control rooms at actual plants, technical details on creating a multi-plant and multi-vendor reconfigurable simulator, and current efforts to support control room modernization at U.S. utilities. The glasstop simulator provides an ideal testbed for prototyping and validating new control room concepts. Equally importantly, it is helping create a standardized and vetted human factors engineering process that can be used across the nuclear industry to ensure control room upgrades maintain and even improve current reliability and safety.

  6. Determination of electromagnetic modes in oversized corrugated waveguides on the electron cyclotron resonance heating installation at the tokamak Tore Supra; Determination de modes electromagnetiques de guides d'ondes corrugues surdimensionnes sur l'installation de chauffage des electrons de tokamak Tore Supra

    Energy Technology Data Exchange (ETDEWEB)

    Courtois, L

    2001-03-09

    Electron cyclotron resonance heating (ECRH) in the Tore Supra tokamak constitutes an important step in the research aimed at obtaining thermonuclear fusion reactions. Electron heating is achieved by transmitting an electromagnetic wave from the oscillators (gyrotrons) to the plasma via the fundamental mode, propagating in oversized corrugated waveguides. Maximizing the proportion of the gyrotron power coupled to the fundamental waveguide mode is essential for the good functioning of the transmission line and for maximizing the effect on the plasma. This thesis gives all necessary tools for finding the proportion of the fundamental mode and all other modes present in passive components and at the output of the gyrotron as installed in the Tore Supra ECRH plant. This characterisation is based on obtaining amplitude and phase diagrams of the electric field on a plane transverse to the propagation axis. The most difficult part of obtaining these diagrams is measuring the phase which, despite the very short wavelength, is measured directly at low power levels. At high power levels the phase is numerically reconstructed from amplitude measurements for gyrotron characterisation. A complete theoretical study of the phase reconstruction code is given including its validation with theoretical diagrams. This study allows the realisation of a modal characterisation unit electromagnetic for measurement of radiated beams and usable in each part of the ECRH installation. At the end, the complete modal characterisation is given at low level for a mode converter and also at high level for the first series gyrotron installed at TORE SUPRA. (author)

  7. Migration, pauvreté rurale et gestion communautaire des ressources ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    La migration, les déplacements et les réinstallations forcées sont loin d'être des phénomènes nouveaux au Cambodge. Après des années d'agitation et de troubles de l'ordre civil, et en raison de la croissance rapide de la population et du développement agricole, la plupart des terres irriguées et inondables au Cambodge ...

  8. De la conception à la sûreté des barrages de correction torrentielle From design to safety and reliability assessment of torrent control dams

    Directory of Open Access Journals (Sweden)

    Jean-Marc Tacnet et Didier Richard

    2010-09-01

    Full Text Available Dans les bassins versants de montagne, les phénomènes torrentiels, de par leur caractère brutal et très rapide, présentent des risques importants pour les biens, les personnes et l'environnement. Afin de réduire ces risques, des mesures structurelles ont été mises en place, comme la construction de barrages de correction torrentielle. Mais comment caractériser l'état et l'efficacité de ces ouvrages ? Assurent-ils un niveau de sécurité suffisant ? Les auteurs s'intéressent ici aux principes de conception et à l'analyse des pathologies et défaillances de ce type d'ouvrages.To reduce risk level in mountain rivers floods prone areas, structural defence works are still mandatory. The global efficiency of those protection strategies depends on both functional and structural approaches. This article first presents main types and functions of torrent control dams. Afterwards, it describes the design and building requirements with references to the main failure situations that could be encountered. This technical background is finally identified as a basis for danger and risk analysis that are going to become mandatory for some categories of torrent control dams.

  9. Neural networks applied to inverters control; Les reseaux de neurones appliques a la commande des convertisseurs

    Energy Technology Data Exchange (ETDEWEB)

    Jammes, B; Marpinard, J C

    1996-12-31

    Neural networks are scarcely applied to power electronics. This attempt includes two different topics: optimal control and computerized simulation. The learning has been performed through output error feedback. For implementation, a buck converter has been used as a voltage pulse generator. (D.L.) 7 refs.

  10. Ageing Mechanisms and Control. Specialists’ Meeting on Life Management Techniques for Ageing Air Vehicles (Les mecanismes vieillissants et le controle) (Reunions des specialistes des techniques de gestion du cycle de vie pour vehicules aeriens vieillissants)

    Science.gov (United States)

    2003-02-01

    Synthèse Aujourd’hui, les chefs militaires de l’ensemble des pays membres de l’OTAN constatent que leurs flottes d’aéronefs sont maintenues en exploitation...problems and, where possible, the investment required for attaining the needed capability. Thème Aujourd’hui, les chefs militaires de l’ensemble des pays...25.13091 identifies risk requirements and its companion Advisory Circular (AC 25.1309) interprets those requirements as the familiar 10-9 probability

  11. L'incidence des pesticides sur les producteurs de pommes de terre ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    27 janv. 2011 ... L'incidence des pesticides sur les producteurs de pommes de terre de l'Équateur ... L'entreposage des pesticides dans les bâtiments de ferme, des installations .... (les pesticides) : L'intoxication par les pesticides en Équateur.

  12. Special Nuclear Material Control by the Power Reactor Operator; Controle des Matieres Nucleaires Speciales par l'Exploitant d'une Centrale Nucleaire; Spetsial'nyj kontrol' nalichiya yadernykh materialov operatorom ehnergeticheskogo reaktora; Control de Materiales Nucleares Especiales por Parte de Quienes Operan el Reactor de Potencia

    Energy Technology Data Exchange (ETDEWEB)

    Cordin, R. A. [Yankee Atomic Electric Company, Boston, MA (United States)

    1966-02-15

    insurance programme. (author) [French] L'uranium, combustible relativement nouveau et extremement interessant pour la production d'electricite, doit faire l'objet d'un controle tres strict depuis le moment ou l'exploitant de la centrale en devient financierement responsable jusqu'a celui oti, sous forme de combustible partiellement epuise, la matiere est transferee dans une autre installation et oti l'on recupere ce qui reste de sa valeur initiale. La plupart des exploitants de centrales nucleaires dirigeaient des centrales alimentees par des combustibles fossiles avant l'avenement de l'energie nucleaire et ils ont etabli depuis longtemps un controle etendu et efficace de ces combustibles fossiles. L'exploitant d'une centrale nucleaire doit exercer un controle non moins efficace sur les matieres nucleaires speciales utilisees dans son installation. La technique de l'exploitation des centrales nucleaires n'est pas ancienne et, au cours de, son existence relativement breve, les ingenieurs et hommes de science des Etats-Unis ont constamment ameliore les plans des centrales et les methodes d'exploitation afin de reduire les couts et de permettre aux centrales nucleaires de concurrencer les centrales classiques. La gestion des matieres nucleaires doit etre aussi moderne et efficace que possible pour assurer que les progres technologiques grace auxquels les prix on pu etre reduits ne soient pas mis en echec par des insuffisances dans la manipulation du combustible nucleaire et la tenue de la comptabilite des stocks. Pour assurer la gestion des matieres nucleaires, il faut que l'exploitant de la centrale etablisse et tienne a jour une comptabilite complete et detaillee, sans etre necessairement complexe pour autant; en fait, la simplicite est extremement souhaitable. Bien que le combustible nucleaire soit nouveau et qu'il n'ait rien de commun avec les combustibles classiques, aucun secret ne doit s'y attacher. Le controle des matieres nucleaires dans le cadre de la gestion des

  13. Contribution au developpement d'une methode de controle des procedes dans une usine de bouletage

    Science.gov (United States)

    Gosselin, Claude

    This thesis, a collaborative effort between Ecole de technologie superieure and ArcelorMittal Company, presents the development of a methodology for monitoring and quality control of multivariable industrial production processes. This innovation research mandate was developed at ArcelorMittal Exploitation Miniere (AMEM) pellet plant in Port-Cartier (Quebec, Canada). With this undertaking, ArcelorMittal is striving to maintain its world class level of excellence and continues to pursue initiatives that can augment its competitive advantage worldwide. The plant's gravimetric classification process was retained as a prototype and development laboratory due to its effect on the company's competitiveness and its impact on subsequent steps leading to final production of iron oxide pellets. Concretely, the development of this expertise in process control and in situ monitoring will establish a firm basic knowledge in the fields of complex system physical modeling, data reconciliation, statistical observers, multivariate command and quality control using real-time monitoring of the desirability function. The hydraulic classifier is mathematically modeled. Using planned disturbances on the production line, an identification procedure was established to provide empirical estimations of the model's structural parameters. A new sampling campaign and a previously unpublished data collection and consolidation policy were implemented plant-wide. Access to these invaluable data sources has enabled the establishment of new thresholds that govern the production process and its control. Finally, as a substitute for the traditional quality control process, we have implemented a new strategy based on the use of the desirability function. Our innovation is not in using this Finally, as a substitute for the traditional quality control process, we have implemented a new strategy based on the use of the desirability function. Our innovation is not in using this function as an indicator of

  14. Report on the behalf of the Foreign Affairs, Defence and Armed Forces Commission on the bill project authorizing the ratification of the treaty between the French Republic, the United-Kingdom of Great-Britain and Northern Ireland related to common hydrodynamic and radiographic installations; Rapport fait au nom de la commission des affaires etrangeres, de la defense et des forces armees (1) sur le projet de loi autorisant la ratification du traite entre la Republique francaise et le Royaume-Uni de Grande Bretagne et d'Irlande du nord relatif a des installations radiographiques et hydrodynamiques communes

    Energy Technology Data Exchange (ETDEWEB)

    Pintat, X.

    2011-07-01

    After a presentation of the main directions defined during the London summit for the French-British defence cooperation (convergence of interests and ambitions, cooperation in the operational, capacity, technological and industrial areas), this report more precisely presents and discusses the cooperation perspectives in the military nuclear field (deterrence by the French and British nuclear weapons, the experimentation as a field of cooperation, cooperation modalities with a common installation and a common technological development centre). These perspectives encompass experimentation installations aimed at the simulation of nuclear weapons. Then, it details the content of the treaty related to common hydrodynamic and radiographic installations: characteristics of the EPURE and TDC installations, financing conditions, and some other issues

  15. DAQ INSTALLATION IN USC COMPLETED

    CERN Multimedia

    A. Racz

    After one year of work at P5 in the underground control rooms (USC55-S1&S2), the DAQ installation in USC55 is completed. The first half of 2006 was dedicated to the DAQ infrastructures installation (private cable trays, rack equipment for a very dense cabling, connection to services i.e. water, power, network). The second half has been spent to install the custom made electronics (FRLs and FMMs) and place all the inter-rack cables/fibers connecting all sub-systems to central DAQ (more details are given in the internal pages). The installation has been carried out by DAQ group members, coming from the hardware and software side as well. The pictures show the very nice team spirit !

  16. Radiation control at the Continuous Electron Beam Accelerator Facility (CEBAF), a new high power CW electron accelerator installation

    International Nuclear Information System (INIS)

    Stapleton, G.B.; Thomas, R.H.

    1989-01-01

    A description is given of the design goals and radiation control measures, for a new 4 GeV, 1 MW electron accelerator under construction in the USA. The paper illustrates the importance of cooperation between designers and regulators. 15 refs., 1 fig., 3 tabs

  17. LA DIFFUSION DES INNOVATIONS MANAGERIALES EN CONTROLE DE GESTION, UNE APPROCHE RHETORIQUE

    OpenAIRE

    Eric Maton; Dragos Zelinschi

    2012-01-01

    International audience; The purpose of this paper is to explain how a rhetoric approach with several dimensions can help to better understand the diffusion of management control innovations. We use a dynamic conception of rhetoric and a rhetorical analysis of graphical representations. We apply a rhetoric framework of analysis to two innovations (activity-based costing and balanced scorecard) and to their description in one review, the Harvard Business Review, with an objective of a wide diff...

  18. Les risques industriels et le prix des logements

    DEFF Research Database (Denmark)

    Grislain-Letrémy, Céline; Katossky, Arthur

    2013-01-01

    Le prix des logements peut diminuer du fait de la proximité d’installations industrielles. Cet effet dépend de la perception du risque par les riverains et est donc potentiellement modifié par des événements changeant la perception du risque, tels que les plans de prévention des risques technolog......Le prix des logements peut diminuer du fait de la proximité d’installations industrielles. Cet effet dépend de la perception du risque par les riverains et est donc potentiellement modifié par des événements changeant la perception du risque, tels que les plans de prévention des risques...... proximité d’installations industrielles dans les agglomérations françaises de Bordeaux, Dunkerque et Rouen. La méthode des prix hédoniques permet d’estimer l’effet de la proximité des usines sur les prix des logements. Les résultats suggèrent que les écarts de prix ne sont modifiés ni par les incidents...

  19. Status of Irradiation Control of Insects in Grain; Radiodesinsection des Cereales; Sostoyanie bor'by s hasekomymi-vreditelyami zerna putem oblucheniya; Radiodesinsectacion de Cereales Almacenados

    Energy Technology Data Exchange (ETDEWEB)

    Cornwell, P. B. [Rentokil Laboratories Ltd., East Grinstead, Sussex (United Kingdom)

    1966-11-15

    Research into the uses of ionizing radiations for the control of insects infesting stored foodstuffs has demonstrated the technical feasibility of irradiation for the treatment of grain. Studies in radiation entomology have established the susceptibilities of the principal grain storage insects and the extent to which environmental factors may modify the efficacy of treatment. Investigations into chemical and physical properties of irradiated grain have shown no adverse effects on organoleptic and manufacturing properties at the dose level required for disinfestation. Work on the wholesomeness of irradiated grain has shown no loss in nutritional adequacy, with the result that clearance has been given in the United States for the human consumption of irradiated wheat and wheat products. Engineering considerations suggest that irradiation is an economic competitor to chemical methods for the treatment of grain at large exporting or collecting centres. With bulk storage and automated conveying systems now established as the most expedient method of handling grain between producers and consumers, it can be wisely predicted that implementation of radiation disinfestation into the grain handling industry will follow in the foreseeable future. Information on infestation problems and the grain-handling industries of various countries is used to illustrate the likely future potential of irradiation for the treatment of grain on an international scale. (author) [French] Les recherches sur l'emploi des rayonnements ionisants pour la desinsection des denrees alimentaires emmagasinees ont demontre qu'il est techniquement possible d'utiliser l'irradiation pour le traitement des cereales. Les etudes de radioentomologie ont permis d'etablir les sensibilites des principaux insectes infestant les cereales stockees et la mesure dans laquelle les-facteurs inherents au milieu ambiant peuvent modifier l'efficacite du traitement. Les recherches sur les proprietes chimiques et physiques

  20. Edge localized modes control by resonant magnetic perturbations; Controle des instabilites de bord par perturbations magnetiques resonantes

    Energy Technology Data Exchange (ETDEWEB)

    Nardon, E

    2007-10-15

    The present work is dedicated to one of the most promising methods of control of the ELMs (Edge Localized Modes), based on a system of coils producing Resonant Magnetic Perturbations (RMPs). Our main objectives are, on the one hand, to improve the physical understanding of the mechanisms at play, and on the other hand to propose a concrete design of ELMs control coils for ITER. In order to calculate and analyze the magnetic perturbations produced by a given set of coils, we have developed the ERGOS code. The first ERGOS calculation was for the DIII-D ELMs control coils, the I-coils. It showed that they produce magnetic islands chains which overlap at the edge of the plasma, resulting in the ergodization of the magnetic field. We have then used ERGOS for the modelling of the experiments on ELMs control using the error field correction coils at JET and MAST. In the case of JET, we have shown the existence of a correlation between the mitigation of the ELMs and the ergodization of the magnetic field at the edge, in agreement with the DIII-D result. In order to design the ELMs control coils for ITER we have used ERGOS intensively, taking the case of the DIII-D I-coils as a reference. Three candidate designs came out, which we presented at the ITER Design Review, in 2007. Recently, the ITER management decided to provide a budget for building ELMs control coils, the design of which remains to be chosen between two of the three options that we proposed. Finally, in order to understand better the non-linear magnetohydrodynamics phenomena taking place in ELMs control by RMPs, we performed numerical simulations, in particular with the JOREK code for a DIII-D case. The simulations reveal the existence of convection cells induced at the edge by the magnetic perturbations, and the possible screening of the RMPs in presence of rotation.

  1. Concept for long-time integrity assurance illustrated by a steam generator and the volume control system of the nuclear power plant Neckarwestheim; Gesamtkonzept zur langfristigen Absicherung der Integritaet am Beispiel des Dampferzeugers und des Volumenregelsystems des GKN

    Energy Technology Data Exchange (ETDEWEB)

    Bartonicek, J; Zaiss, W [Gemeinschaftskernkraftwerk Neckar GmbH, Neckarwestheim (Germany); Broecker, B [Preussische Elektrizitaets-AG (Preussenelektra), Hannover (Germany)

    1998-11-01

    Ensuring integrity of safety-relevant components or systems over their serviceable life is a legal requirement. A decisive factor within the established system for integrity assurance is whether there is sufficient information available about inservice degradation mechanisms, and whether this information is taken into account in component or system designing. The design relies on existing specifications or data reflecting the then current knowledge. This is why existing knowledge has to be updated in response to new knowledge obtained from plant operation, and negative effects revealed have to be eliminated by appropriate measures. Damage to components is caused by real loads occurring during operation, or real local conditions in the system, so that inservice monitoring of local conditions and causes leading to damage is a priority task. The information obtained from monitoring can be taken as a basis for modifying the operating mode and documenting the current status of the system. Another redundant measure is monitoring of the consequences of a degradation during operation, this task primarily relying on non-destructive examinations. The efficiency of this measure decisively depends on the available knowledge of possible damaging mechanisms, i.e. monitoring of causes. A comprehensive concept for ensuring long-time integrity will encompass the above quality monitoring and evaluation activities, operation-induced impact and damage monitoring and documentation, and updating of the data representing current knowledge. (orig./CB) [Deutsch] Bei sicherheitstechnisch wichtigen Komponenten bzw. Systemen ist die Integritaet im Betrieb zu gewaehrleisten. Dabei ist entscheidend, ob die betrieblichen Schadensmechanismen ausreichend bekannt sind und bei der Auslegung auch entsprechend beruecksichtigt wurden. Die Auslegung erfolgt aufgrund von Spezifikationen bzw. Annahmen, die den jweiligen Kenntnisstand widerspiegeln. Die Aenderungen des Kenntnisstandes im laufenden Betrieb

  2. Development and analysis of an economizer control strategy algorithm to promote an opportunity for energy savings in air conditioning installations

    Energy Technology Data Exchange (ETDEWEB)

    Neto, Jose H.M.; Azevedo, Walter L. [Centro Federal de Educacao Tecnologica de Minas Gerais (CEFET), Belo Horizonte, MG (Brazil). Dept. de Engenharia Mecanica]. E-mail: henrique@daem.des.cefetmg.br

    2000-07-01

    This work presents an algorithm control strategy denominated enthalpy economizer. The objective of this algorithm strategy is to determine the adequate fractions of outside and return air flowrates entering a cooling coil based on the analysis of the outside, return and supply air enthalpies, rather than on the analysis of the dry bulb temperatures. The proposed algorithm predicts the actual opening position of the outside and return air dampers in order to provide the lower mixing air enthalpy. First, the psychometrics properties of the outside and return air are calculated from actual measurements of the dry and wet bulb temperatures. Then, three distinct cases are analyzed: the enthalpy of the outside air is lower than the enthalpy of the supply air (free cooling); the enthalpy of the outside air is higher than the enthalpy of the return air; the enthalpy of the outside air is lower than the enthalpy of the return air and higher than the temperature of the supply air. Different outside air conditions were selected in order to represent typical weather data of Brazilians cities, as well as typical return air conditions. It was found that the enthalpy control strategy could promote an opportunity for energy savings mainly during mild nights and wintertime periods as well as during warm afternoons and summertime periods, depending on the outside air relative humidity. The proposed algorithm works well and can be integrated in some commercial automation software to reduce energy consumption and electricity demand. (author)

  3. Electromagnetic control of mass transfer at liquid/liquid interfaces; Controle electromagnetique des transferts de masse aux interfaces liquide/liquide

    Energy Technology Data Exchange (ETDEWEB)

    Saadi, B

    2006-04-15

    Most metallurgical processes, such as steel refining or nuclear waste processing; the interfaces between two liquid phases are the regions of mass transfer. These transfers require the implementation of a means of stirring to accelerate the kinetics of the pollutants transfer between both phases. This thesis deals with the use of the electromagnetic forces to stir, without any material contact, the bath core and the interface in order to control or even increase the kinetic transfers. To achieve this, two complementary experimental installations were used. The first experiment allows the measurement of the Indium transfer, initially dissolved in mercury towards a covering electrolyte layer and the velocity field in mercury. The performed experiments, determine the topology of the fields flows speeds in the mercury bath, moreover the behaviour of the transfer kinetics versus the intensity of the magnetic field are established. This evolution is correlated with the dynamic behaviour of the mercury surface. The second installation allows the characterization of an element transfer (Pb, Zr or Ce) initially contained in a fluorinated salt towards an antimony matrix containing lithium. It appears that all transfers kinetics are very fast. The proposed experimental set-up is particularly efficient for Cerium transfer (limited by the interface) but does not present any action for Zirconium transfer. (author)

  4. Nuclear Installations Act 1965

    International Nuclear Information System (INIS)

    1965-01-01

    This Act governs all activities related to nuclear installations in the United Kingdom. It provides for the licensing procedure for nuclear installations, the duties of licensees, the competent authorities and carriers of nuclear material in respect of nuclear occurrences, as well as for the system of third party liability and compensation for nuclear damage. The Act repeals the Nuclear Installations (Licensing and Insurance) Act 1959 and the Nuclear Installations (Amendment Act) 1965 except for its Section 17(2). (NEA) [fr

  5. Installation report - Lidar

    DEFF Research Database (Denmark)

    Georgieva Yankova, Ginka; Villanueva, Héctor

    The report describes the installation, configuration and data transfer for the ground-based lidar. The unit is provided by a customer but is installed and operated by DTU while in this project.......The report describes the installation, configuration and data transfer for the ground-based lidar. The unit is provided by a customer but is installed and operated by DTU while in this project....

  6. Design of a new adaptive fuzzy controller and its application to vibration control of a vehicle seat installed with an MR damper

    International Nuclear Information System (INIS)

    Phu, Do Xuan; Shin, Do Kyun; Choi, Seung-Bok

    2015-01-01

    This paper presents a new adaptive fuzzy controller featuring a combination of two different control methodologies: H infinity control technique and sliding mode control. It is known that both controllers are powerful in terms of high performance and robust stability. However, both control methods require an accurate dynamic model to design a state variable based controller in order to maintain their advantages. Thus, in this work a fuzzy control method which does not require an accurate dynamic model is adopted and two control methodologies are integrated to maintain the advantages even in an uncertain environment of the dynamic system. After a brief explanation of the interval type 2 fuzzy logic, a new adaptive fuzzy controller associated with the H infinity control and sliding mode control is formulated on the basis of Lyapunov stability theory. Subsequently, the formulated controller is applied to vibration control of a vehicle seat equipped with magnetorheological fluid damper (MR damper in short). An experimental setup for realization of the proposed controller is established and vibration control performances such as acceleration at the driver’s seat are evaluated. In addition, in order to demonstrate the effectiveness of the proposed controller, a comparative work with two existing controllers is undertaken. It is shown through simulation and experiment that the proposed controller can provide much better vibration control performance than the two existing controllers. (paper)

  7. Quality Control of Installation and Commissioning of Offshore Platform Instrument System%海上平台仪表安装调试质量控制分析

    Institute of Scientific and Technical Information of China (English)

    周永辉

    2016-01-01

    The instrument installation and commissioning work is a very important work in offshore oil platform construction and renovation process, the overall quality control is to ensure the intelligent control instrument play a role. This paper is based on the basic situation of offshore oil engineering automation instrument, analysis of the quality control factors of automation instrumentation engineering, finally discusses the technical measures of quality control of offshore oil platform automation instrument engineering.%仪表安装调试是海上石油平台建设、改造中一项非常重要的工作,全面的质量控制是自动化仪表设备发挥智能控制作用的保证。本文立足于海洋石油自动化仪表工程基本情况,分析自动化仪表工程质量控制因素,最后讨论了海上石油平台自动化仪表工程质量控制的技术措施。

  8. Installation of the LHC experimental insertions

    CERN Document Server

    Bartolome-Jimenez, S

    2004-01-01

    The installation of the LHC experimental insertions, and particularly the installation of the low-beta quadrupoles, raises many technical challenges due to the stringent alignment specifications and to the difficulty of access in very confined areas. The compact layout with many lattice elements, vacuum components, beam control instrumentation and the presence of shielding does not allow for any improvisation in the installation procedure. This paper reviews all the constraints that need to be taken into account when installing the experimental insertions. It describes the chronological sequence of installation and discusses the technical solutions that have been adopted.

  9. INSTALLATION OF THE LHC EXPERIMENTAL INSERTIONS

    CERN Document Server

    Bartolome-Jimenez, S

    2004-01-01

    The installation of the LHC experimental insertions, and particularly the installation of the Low-Beta quadrupoles, raises many technical challenges due to the stringent alignment specifications and to the difficulty of access in very confined areas. The compact layout with many lattice elements, vacuum components, beam control instrumentation and the presence of shielding does not allow for any improvisation in the installation procedure. This paper reviews all the constraints that need to be taken into account when installing the experimental insertions. It describes the chronological sequence of installation and discusses the technical solutions that have been adopted.

  10. The Upgraded Plasma Focus Installation > - The Installation >

    International Nuclear Information System (INIS)

    Krokhin, O.N.; Nikulin, V.Ya.; Babenko, B.A.; Gorbunov, D.N.; Gurei, A.E.; Kalachev, N.V.; Kozlova, T.A.; Malafeev, Yu.S.; Polukhin, S.N.; Sychev, A.A.; Tikhomirov, A.A.; Tsybenko, S.P.; Volobuev, I.V.

    1999-01-01

    The paper presents the upgraded plasma focus installation > - the installation > and some preliminary experimental results. The total energy stored in capacity bank is now 400 kJ, current - 5 MA with the rise time 3.5 μs. The investigation is targeted on the study of near electrode processes and its influence on plasma dynamics in a special operating regime of Filippov type PF - Hard X-ray regime. (author)

  11. State of the art of methods for the elimination of nitrogen in small and medium-sized agricultural biogas installations - Final report; Etat de l'art des methodes (rentables) pour l'elimination, la concentration ou la transformation de l'azote pour les installations de biogaz agricoles de taille petite/moyenne - Rapport final

    Energy Technology Data Exchange (ETDEWEB)

    Bakx, T.; Membrez, Y.; Mottet, A. [Erep SA, Aclens (Switzerland); Joss, A.; Boehler, M. [EAWAG, Duebendorf (Switzerland)

    2009-09-15

    This final report for the Swiss Federal Office of Energy (SFOE) reports on research work done on the elimination, concentration or transformation of nitrogen in small and medium-sized agricultural biogas installations. The goal of the project - the conception of a state of the art on existing, economically feasible technologies or processes to treat the nitrogen produced in anaerobic digestion - is discussed. Typical Swiss small/medium size agricultural biogas plants with an electrical power of around 100 kW from its combined heat and power generation (CHP) unit are examined. A reference installation is discussed which treats cow slurry, organic restaurant waste, used vegetable oils, bakery wastes, coffee grounds, and cereal wastes. A literature research is described which was conducted to find information regarding available treatment techniques for slurry and digestate treatment. Information from Switzerland, France, Belgium, the Netherlands, Germany and Austria was used. Various techniques are examined including a screw-press separator, a centrifuge, membrane filtration, air stripping with acid wash, air stripping with catalytic combustion, evaporation, band dryer, precipitation, composting and biological treatment. The economic analysis and the comparison between techniques are quoted as being coarse as they are based on numerous assumptions.

  12. Evaluating the Acoustic Benefits of Over-the-Rotor Acoustic Treatments Installed on the Advanced Noise Control Fan

    Science.gov (United States)

    Gazella, Matthew R.; Takakura, Tamuto; Sutliff, Daniel L.; Bozak, Richard F.; Tester, Brian J.

    2017-01-01

    Over the last 15 years, over-the-rotor acoustic treatments have been evaluated by NASA with varying success. Recently, NASA has been developing the next generation of over-the-rotor acoustic treatments for fan noise reduction. The NASA Glenn Research Centers Advanced Noise Control Fan was used as a Low Technology Readiness Level test bed. A rapid prototyped in-duct array consisting of 50 microphones was employed, and used to correlate the in-duct analysis to the far-field acoustic levels and to validate an existing beam-former method. The goal of this testing was to improve the Technology Readiness Level of various over-the-rotor acoustic treatments by advancing the understanding of the physical mechanisms and projecting the far-field acoustic benefit.

  13. À LA RECHERCHE DES FONDEMENTS CONCEPTUELS ET METHODOLOGIQUES DU BALANCED SCORECARD : LE MODELE DE KAPLAN ET NORTON REVISITÉ À TRAVERS LE CADRE CONCEPTUEL DES LEVIERS DE CONTROLE.

    OpenAIRE

    Gérald Naro; Denis Travaillé

    2009-01-01

    International audience; The aim of this paper is to confront the Balanced Scorecard (BSC) with Simons' (1995) levers of control framework and to discuss its role in the various stages of the strategic process. Whereas Kaplan and Norton present the BSC above all as a system of diagnostic control, Simons' (1995) levers of control model leads us to privilege a representation of the BSC in the form of an interactive process. Such an approach presents several theoretical and methodological implica...

  14. Calculation of control rods in rectangular reactor, and applications (1960); Calcul des barres de conteole dans un reacteur rectangulaire et applications (1960)

    Energy Technology Data Exchange (ETDEWEB)

    Goshen, S; Pazy, A [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    The aim of this report is to find a method for estimating the anti-reactivity of control rods perpendicular to the axis in a cylindrical pile. The paper is divided into two parts. In the first is given a method of calculating control rods in a rectangular pile, similar to the Nordheim-Scalettar method for cylindrical piles. As an example the formulas are given for the theories of one and two neutron groups, the generalisation for several groups being evident. In the second part we find by a variation method a formula for estimating the Laplacian of a pile, which may be divided into parallelepipeds for which the Laplacian are given. Finally, this formula is used to calculate the anti-reactivity of rods perpendicular to the axis in a cylindrical pile. (author) [French] Le but de ce rapport est de trouver une methode pour estimer l'antireactivite des barres de controle perpendiculaires a l'axe dans pile cylindrique. Le rapport se divise en deux parties. Dans la premiere nous donnons une methode de calcul des barres de controle dans une pile rectangulaire, analogue a la methode de Nordheim-Scalettar pour les piles cylindriques. A titre d'exemple, nous donnons les formules de theories a un et deux groupes de neutrons, la generalisation pour plusieurs groupes est evidente. Dans la deuxieme partie, nous trouvons, par une methode de variation, une formule qui permet d'estimer le laplacien d'une pile, qui peut etre divisee en parallelepipedes dont les laplaciens sont donnes. Nous utilisons enfin, cette formule pour calculer l'antireactivite des barres perpendiculaires a l'axe dans une pile cylindrique. (auteur)

  15. Contrôle des Circuits Auxiliaires des PFW (arrêt machines 2002/2003)

    CERN Document Server

    Ottaviani, J

    2003-01-01

    Les PFW sont des nappes polaires installées sur les pôles des aimants du PS. Elles sont au nombre de 4 par unité d aimant et constituées d un circuit principal (dans lequel circule le courant désiré selon le cycle magnétique utilisé) et de circuits auxiliaires. Les circuits auxiliaires sont des enroulements de correction (boucles de tour et pick-up brasés sur les enroulements). Pendant la variation du champ magnétique de l aimant PS, on utilise des tensions induites dans ces circuits auxiliaires pour corriger les erreurs de champ dues aux courants de Foucault dans la chambre à vide. Chaque année, pendant l arrêt machine, on vérifie si les caractéristiques des circuits auxiliaires correspondent aux normes (mesures des résistances des boucles de tours, résistances entre pick-up et isolation des circuits) afin de faire un suivi. Les 404 PFW sont ainsi vérifiées. Dans cette note, on ne relèvera que les PFW ayant des défauts (valeurs hors tolérances, boucles ouvertes ou en court-circuit, déf...

  16. Reports by the Parliamentary Office for scientific and technological assessments. Thursday, May 19, 2011. The French nuclear installations in front of natural risks; Comptes rendus de l' Office Parlementaire d'Evaluation des Choix Scientifiques et Technologiques. Jeudi 19 mai 2011. Les installations nucleaires francaises face aux risques naturels

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-05-15

    Members of the French Parliament, representatives of the French nuclear safety authority (ASN), of the Academy of Sciences, researchers, and associations argue on major natural risks and their evaluation, notably by referring to the earthquake and tsunami which caused the Fukushima accident. They discuss the predictability of these phenomena, and evoke the context and consequences of climate change. A representative of the Academy of Technologies discusses the risks of land-slips and dam failure, outlines that earthquakes only caused some cracks in dams, and evokes the legal context and organisation regarding dam safety. Possible effects of earthquakes in France are discussed. A second part addresses the way natural risks are taken into account in the protection of nuclear installations

  17. Règle d'installation vidéosurveillance

    CERN Document Server

    2011-01-01

    Ce référentiel définit les exigences techniques minimales applicables aux systèmes de vidéosurveillance, avec des caméras implantées à l’intérieur ou l’extérieur. Il donne des recommandations pour concevoir, installer et maintenir des systèmes de vidéosurveillance dans des applications de sécurité. Pour une vidéosurveillance efficace, on pourra appliquer la méthodologie proposée : comment réaliser l’analyse de risque ? Quel rôle attribuer au système de vidéosurveillance ? quel système mettre en place, avec quelles fonctions et quelles caractéristiques techniques ? comment réaliser l’installation ? comment assurer la maintenance du système ? Cette nouvelle édition a notamment pour objectifs de : compléter les rôles de la vidéosurveillance (gestion d'activité) ; clarifier la définition des objectifs de prise de vue ; inclure l'utilisation d'une cible normalisée pour la réception de l'installation ; mettre à disposition un outil d'aide pour les petits systèmes ;...

  18. Design, construction and installation of the electromechanical components of the current control of filament of the Pelletron Electron Accelerator; Diseno, construccion e instalacion de las componentes electromecanicas del control de corriente de filamento del acelerador de electrones Pelletron

    Energy Technology Data Exchange (ETDEWEB)

    Aguilar J, R.A.; Valdovinos A, M.; Lopez V, H. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    1985-01-15

    For the operation of the Pelletron electron accelerator is required to have control of the filament current. For it was designed, built and installed an electromechanical system located in the Acceleration Unit inside the Accelerator tank and operated from the Control console. All the components located inside the tank operated under the following conditions: Pressure: until 7.03 Kg/cm{sup 2}; High voltage: 10{sup 6} V (only the insulating arrow); Atmosphere: mixture of N{sub 2} and CO{sub 2} or SF{sub 6}. (Author)

  19. Continuous analytical control of the streaming waters in a uranium treatment plant and of various chemical products using automatic discharge valves; Controle par analyse en continu des eaux de ruissellement d'une usine traitant de l'uranium et divers produits chimiques avec commande automatique des vannes de decharge

    Energy Technology Data Exchange (ETDEWEB)

    Archimbaud, M; Simeon, C [Commissariat a l' Energie Atomique, Pierrelatte (France)

    1968-07-01

    This report describes a method for controlling the streaming waters produced by the Pierrelatte Centre; it is based on continuous analysis, with simultaneous recording of the species liable to be found accidentally in the corresponding hydrological circuits (chlorides, fluorides, chromium VI, uranium). An alarm set off at pre-determined thresholds leads to an automatic cutting off of the discharge valves; the outward flow of the waters is thus interrupted. This study has shown the various applications which can be found for this water control method, and gives an idea of the cost price. (authors) [French] Ce rapport decrit un mode de controle des eaux de ruissellement provenant du Centre de Pierrelatte base sur une analyse en continu, avec enregistrement des corps susceptibles de se retrouver accidentellement dans les reseaux hydrologiques correspondants (chlorures, fluorures, chrome VI, uranium). Le declenchement d'une alarme a partir de seuils choisis permet de fermer automatiquement les vannes de decharge et d'arreter ainsi l'ecoulement vers l'exterieur. Cette etude montre quelles peuvent etre les diverses applications de cette methode de controle des eaux et elle indique un ordre de grandeur du prix de revient. (auteurs)

  20. Model-based control of a fuel cell cooling circuit with automatic software testing; Modellbasierte Steuerung des Kuehlkreislaufes einer Brennstoffzelle mit automatisiertem Test der Software

    Energy Technology Data Exchange (ETDEWEB)

    Schaefer, Sascha

    2012-07-01

    For reconstruction and control of the volume flow in a cooling circuit a fuel cell system is analyzed, and physical models of the fluid temperature and pump volume flow are derived. On this basis, functional models for derivation of software algorithms are presented which enable model-based calculation of the volume flow in a fluid circuit and coolant pump control on the basis of detailed system modelling. The available functions enable complete control and diagnosis of the volume flow. The functional models in Matlab/Simulink will be implemented in a control unit; they are discussed in the context of a software development process. It is stressed that correctness of the functions must be assured, and a trial automation system for functional models of this type is presented. (orig./AKB) [German] Zur Rekonstruktion und Steuerung des Volumenstroms in einem Kuehlkreislauf, wird ein Brennstoffzellensystem analysiert und physikalische Modelle fuer die Fluidtemperatur und den Pumpenvolumenstrom werden hergeleitet. Basierend auf diesen Zusammenhaengen werden Funktionsmodelle zur Ableitung von Softwarealgorithmen vorgestellt. Diese ermoeglichen es den Volumenstrom in einem Fluidkreislauf modellbasiert zu bestimmen bzw. die Kuehlmittelpumpe basierend auf einer detaillierten Systemmodellierung zu steuern. Die zur Verfuegung stehenden Funktionen erlauben eine komplette Regelung, Steuerung und Diagnose des Volumenstroms. Die Funktionsmodelle, in Matlab/Simulink realisiert und zur Ausfuehrung auf einem Steuergeraet vorgesehen, werden im Kontext eines Softwareentwicklungsprozesses diskutiert. Es wird die Notwendigkeit der Sicherstellung der Korrektheit der Funktionen herausgearbeitet und ein Testautomatisierungssystem fuer solche Funktionsmodelle vorgestellt.

  1. Physics related to control and safety of hybrid systems; Physique associee au controle et a la surete des systemes hybrides

    Energy Technology Data Exchange (ETDEWEB)

    Gueton, O

    2001-12-01

    Regarding nuclear waste management, ADS can be considered as large minor actinides burners. In a first part, a critical analysis of different reactor types shows that fast spectrum, helium coolant and nitride fuel, containing 100% minor actinides, agree perfectly with the high transmutation requirements of ADS. The control and safety demonstration of this system represents the main purpose of this study. Understanding spatial and dynamic behaviour of ADS flux is absolutely necessary. For this purpose, we have defined an indicator to quantify spatial decoupling. It shows, on the one hand, point kinetic deficiency to study local transients, and on the other hand, perturbations propagation differences between ADS and critical cores. Then, in a more concrete approach, accidental sequences (source transient, beam de-focalization, reactivity insertions, loss of flow, depressurization) are evaluated for this core, strongly loaded with minor actinides. It is shown that the automatic beam shutdown leads to preserve large safety margins for all studied transients. The accelerator emergency stop is induced by an unexpected evolution of the core control parameters. These parameters, except reactivity, can be directly measured in subcritical systems like in critical ones. Concerning reactivity, we suggest a new method for its absolute determination in ADS: at the time of reactor start-up, the reactivity must be calibrated by coupling two methods of relative reactivity measurements (pulsed source and Approached Source Multiplication) for successive subcritical levels. After that, the on-line follow-up of reactivity is obtained from this calibration like in a critical core. (authors)

  2. Decommissioning of offshore installations

    Energy Technology Data Exchange (ETDEWEB)

    Oeen, Sigrun; Iversen, Per Erik; Stokke, Reidunn; Nielsen, Frantz; Henriksen, Thor; Natvig, Henning; Dretvik, Oeystein; Martinsen, Finn; Bakke, Gunnstein

    2010-07-01

    New legislation on the handling and storage of radioactive substances came into force 1 January 2011. This version of the report is updated to reflect this new regulation and will therefore in some chapters differ from the Norwegian version (see NEI-NO--1660). The Ministry of the Environment commissioned the Climate and Pollution Agency to examine the environmental impacts associated with the decommissioning of offshore installations (demolition and recycling). This has involved an assessment of the volumes and types of waste material and of decommissioning capacity in Norway now and in the future. This report also presents proposals for measures and instruments to address environmental and other concerns that arise in connection with the decommissioning of offshore installations. At present, Norway has four decommissioning facilities for offshore installations, three of which are currently involved in decommissioning projects. Waste treatment plants of this kind are required to hold permits under the Pollution Control Act. The permit system allows the pollution control authority to tailor the requirements in a specific permit by evaluating conditions and limits for releases of pollutants on a case-to-case basis, and the Act also provides for requirements to be tightened up in line with the development of best available techniques (BAT). The environmental risks posed by decommissioning facilities are much the same as those from process industries and other waste treatment plants that are regulated by means of individual permits. Strict requirements are intended to ensure that environmental and health concerns are taken into account. The review of the four Norwegian decommissioning facilities in connection with this report shows that the degree to which requirements need to be tightened up varies from one facility to another. The permit for the Vats yard is newest and contains the strictest conditions. The Climate and Pollution Agency recommends a number of measures

  3. Solar Water Heater Installation Package

    Science.gov (United States)

    1982-01-01

    A 48-page report describes water-heating system, installation (covering collector orientation, mounting, plumbing and wiring), operating instructions and maintenance procedures. Commercial solar-powered water heater system consists of a solar collector, solar-heated-water tank, electrically heated water tank and controls. Analysis of possible hazards from pressure, electricity, toxicity, flammability, gas, hot water and steam are also included.

  4. Construction of a differential thermal analysis installation; Realisation d'une installation d'analyse thermique differentielle

    Energy Technology Data Exchange (ETDEWEB)

    Branche, G; Chantret, F [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1959-07-01

    The authors are indicating the characteristics of a D.T.A. installation they built. Experimental rooms, ovens, thermal regulation, recording methods are thoroughly described, with outlining of the requirements to obtain a high sensitivity. Numerous D.T.A. curves relating to argillaceous substances, bituminous shales, and uraniferous compounds are given. (author) [French] Les auteurs donnent les caracteristiques de l'installation d'Analyse Thermique Differentielle qu'ils ont construits. Ils decrivent en detail les chambres d'experiences, les fours, la regulation thermique, l'enregistrement, en insistant sur les conditions necessaires pour obtenir une sensibilite elevee. Ils donnent de nombreuses courbes differentielles relatives des produits argileux, des schistes bitumineux et des composes uraniferes. (auteur)

  5. LHC installation planning

    CERN Document Server

    Weisz, S

    2005-01-01

    installation of the general services, the installation of the cryogenic line (QRL), the installation of the machine elements and the hardware commissioning. While the installation of the general services is now almost finished (see presentation by Katy Foraz and Serge Grillot), several problems and delays with the QRL made it unavoidable to revise the installation strategy and to schedule a number tasks in parallel. A new compressed installation planning has been issued, that fulfils the strategic objectives and allows starting new activities with minimal delays in sectors 7-8 and 8-1. However, the shortcuts that are introduced increase the level of risk that we will have to face and the coordination of such a large and complex variety of simultaneous activities makes the project even more challenging. The document will describe how the input from the different equipment groups is taken into account by the master schedule planning team with respect to equipment availability and production as well as logistics...

  6. Energy performance control of local collectivities. Good practices of european towns; Mesure des performances energetiques des collectivites locales. Bonnes pratiques de villes europeennes

    Energy Technology Data Exchange (ETDEWEB)

    Lacassagne, S.; Schilken, P.

    2003-01-01

    Some european towns developed a specific energy and environmental policy, function of many factors. Policies are implemented to favorite the energy consumption and the pollutant emission control. The actions of local collectivities in the domain have been analyzed following three axis: the measure of the energy performance of local collectivities, the territorial energy management tools, the energy integration in sectoral policies. This report takes stock on the first axis analysis. (A.L.B.)

  7. Modern electrical installation for craft students

    CERN Document Server

    Scaddan, Brian

    2013-01-01

    Modern Electrical Installation for Craft Students, Volume 2, Third Edition discusses several topics concerning electrical installations. The book is comprised of eight chapters that deal with craft theory, associated subjects, and electrical industries. Chapter 1 covers inductors and inductance, while Chapter 2 tackles capacitors and capacitance. Chapter 3 deals with inductance and capacitance in installation work. The book also discusses cells, batteries, and transformers. The electrical industries, control and earthing, and testing are also dealt with. The last chapter discusses the basic el

  8. Electrical installation calculations basic

    CERN Document Server

    Kitcher, Christopher

    2013-01-01

    All the essential calculations required for basic electrical installation workThe Electrical Installation Calculations series has proved an invaluable reference for over forty years, for both apprentices and professional electrical installation engineers alike. The book provides a step-by-step guide to the successful application of electrical installation calculations required in day-to-day electrical engineering practice. A step-by-step guide to everyday calculations used on the job An essential aid to the City & Guilds certificates at Levels 2 and 3Fo

  9. Electrical installation calculations advanced

    CERN Document Server

    Kitcher, Christopher

    2013-01-01

    All the essential calculations required for advanced electrical installation workThe Electrical Installation Calculations series has proved an invaluable reference for over forty years, for both apprentices and professional electrical installation engineers alike. The book provides a step-by-step guide to the successful application of electrical installation calculations required in day-to-day electrical engineering practiceA step-by-step guide to everyday calculations used on the job An essential aid to the City & Guilds certificates at Levels 2 and 3For apprentices and electrical installatio

  10. Electrical installations and regulations

    CERN Document Server

    Whitfield, J F

    1966-01-01

    Electrical Installations and Regulations focuses on the regulations that apply to electrical installations and the reasons for them. Topics covered range from electrical science to alternating and direct current supplies, as well as equipment for providing protection against excess current. Cables, wiring systems, and final subcircuits are also considered, along with earthing, discharge lighting, and testing and inspection.Comprised of 12 chapters, this book begins with an overview of electrical installation work, traits of a good electrician, and the regulations governing installations. The r

  11. Study of the strategies and controls of fuel cell systems associated with traction; Etude des strategies et des structures de commande pour le pilotage des systemes energetiques a Pile a Combustible (PAC) destines a la traction

    Energy Technology Data Exchange (ETDEWEB)

    Lachaize, J.

    2004-09-15

    This work falls into project COPPACE (Contribution to the Control of Embedded Fuel cell) carried out by ALSTOM in partnership with the LEEI-INPT and the CEA and supported by the ADEME. The study deals with the modelling and the control of a Fuel Cell system (flow, pressure, temperature) and the definition of the control laws for the static inverters associated with the traction of power train. We develop then a strategy of management of energy by taking into account the criteria of the hydrogen consumption or energy stored in the ultracaps. Each step is verified by total simulation according to a specific profile of mission and a precise model of fuel cells which has been simplified to reduce the computing time. The control of this system is defined by a separate treatment of the components, to finalize the total function objective. The results of simulations show that the system can follow the requested power while controlling the critical elements. (author)

  12. Problems presented by the filtration and sampling of aerosols in the atomic energy programme; Problemes poses par la filtration et le prelevement des aerosols dans le cadre de l'energie atomique

    Energy Technology Data Exchange (ETDEWEB)

    Cochinal, R [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1959-07-01

    The maximum permissible limits for radioactive aerosols are much lower than those for aerosols encountered in the non-nuclear industries. These limits depend on numerous factors such as: nature of the radiation, half-life, etc. The radioactive aerosols can be prepared by various methods. The filtering of the air in high activity laboratories or in plutonium treatment factories necessitates an installation consisting of: - aspiration filters, - extraction filters of very high efficiency (those used for {alpha} emitter cells: designed to be replaced without incurring contamination risks; those used for {gamma} emitter cells: designed to be replaced by remote control). The filtering in nuclear reactors is also effectuated by filter papers: - the G1 reactor with open circuit: the air coolant is entirely filtered at the entry and on leaving; - the G2, G3 and EDF1 reactors with closed circuits: filtering under pressure of a small portion of the coolant gas. (author) [French] Les limites maxima permises des aerosols radioactifs sont beaucoup plus faibles que celles des aerosols rencontres dans l'industrie classique. Elles dependent de nombreux facteurs tel que: nature du rayonnement, periode radioactive, etc... La formation des aerosols radioactifs est de nature diverse. La filtration des laboratoires de haute activite, ou d'usines d'elaboration de plutonium conduit a des types d'installations comportant: - des filtres d'aspiration; - des filtres d'extraction a rendement extremement eleve (type pour cellules emettrices {alpha} concu pour etre change sans risque de contamination, type pour cellules emettrices {gamma}: concu pour etre change a distance) La filtration des reacteurs nucleaires sont egalement effectuee par des papiers filtres: - reacteur G1 a circuit ouvert: air de refroidissement totalement filtre a l'aspiration et a l'extraction; - reacteurs G2, G3, EDF1: a circuit ferme: filtration sous pression d'une faible partie du gaz de refroidissement. (auteur)

  13. 石材幕墙安装技术要点控制%The Control Points of Stone Curtain Wall Installation Technology

    Institute of Scientific and Technical Information of China (English)

    陈慧

    2013-01-01

      随着经济的发展,城市建筑外墙结构采用天然石材幕墙的不断增多。石材幕墙具有独特的艺术风格、高雅的外在造型,能使城市景观得到进一步的提升。石材幕墙的施工方法分为干挂法和湿挂法。本文着重针对干挂法石材幕墙安装的技术要点与质量控制进行探讨。%With the development of economy, exterior wal st-ructure of urban architecture using the natural stone curtain wal structure is increasing. The external appearance of stone curtain wal has a unique artistic style, elegant, can make the city landscape has been further improved. Construction metho-d for stone curtain wal is divided into dry hanging method and wet hanging method. This paper discusses focused on the law of dry hanging stone curtain wal technology points and the quality control of instal ation.

  14. Use of Human Modeling Simulation Software in the Task Analysis of the Environmental Control and Life Support System Component Installation Procedures

    Science.gov (United States)

    Estes, Samantha; Parker, Nelson C. (Technical Monitor)

    2001-01-01

    Virtual reality and simulation applications are becoming widespread in human task analysis. These programs have many benefits for the Human Factors Engineering field. Not only do creating and using virtual environments for human engineering analyses save money and time, this approach also promotes user experimentation and provides increased quality of analyses. This paper explains the human engineering task analysis performed on the Environmental Control and Life Support System (ECLSS) space station rack and its Distillation Assembly (DA) subsystem using EAI's human modeling simulation software, Jack. When installed on the International Space Station (ISS), ECLSS will provide the life and environment support needed to adequately sustain crew life. The DA is an Orbital Replaceable Unit (ORU) that provides means of wastewater (primarily urine from flight crew and experimental animals) reclamation. Jack was used to create a model of the weightless environment of the ISS Node 3, where the ECLSS is housed. Computer aided drawings of the ECLSS rack and DA system were also brought into the environment. Anthropometric models of a 95th percentile male and 5th percentile female were used to examine the human interfaces encountered during various ECLSS and DA tasks. The results of the task analyses were used in suggesting modifications to hardware and crew task procedures to improve accessibility, conserve crew time, and add convenience for the crew. This paper will address some of those suggested modifications and the method of presenting final analyses for requirements verification.

  15. Control of particles flux in a tokamak with an events structure; Controle des flux de particules dans un Tokamak au moyen d`une structure a events

    Energy Technology Data Exchange (ETDEWEB)

    Tsitrone, E

    1995-12-01

    Two key problems in the development of a controlled fusion reactor are: -the control of the ashes resulting from the fusion reaction (helium) and of the impurities coming from the wall erosion, which affect the central plasma performances by diluting the fuel and dissipating a part of the produced energy by radiation. - the removal of the heat carried to the walls by charged particles, which is highly concentrated (peak values of several tens of MW per m{sup 2}). Two types of systems are generally used for the plasma-wall interface: throat limiter and axisymmetric divertor. Neither is an ideal candidate to control simultaneously the heat and particle fluxes. This thesis investigates an alternative configuration, the vented limiter, tested for the first time on the Tore Supra tokamak. The vented limiter principle lies on the recycling neutrals collection by slots, in such a way that local thermal overload is avoided. It is shown experimentally that the surface temperature of the prototype installed in Tore Supra remains uniform. As far as the particle collection is concerned, even though the pressure in the vented limiter is lower than the pressure in the throat limiter by a factor 3 for deuterium and 4 helium, it is sufficient to control the plasma density. Moreover, as with a throat limiter, the pressure exhibits a quadratic evolution with the plasma density. To interpret these results, a model describing the plasma recycling on the limiter and the pumping by the slots has been developed. The model has been validated by a comparison with the experimental data. It was then used to propose an optimized version of the prototype with reshaped slots. This should improve the pumping efficiency by a factor 2, in deuterium as well as in helium, but without removing the discrepancy between both pumping efficiencies. (Abstract Truncated)

  16. Scaling control in superficial installations at the Las Tres Virgenes, geothermal field, BCS; Control de incrustacion en instalaciones superficiales del campo geotermico de Las Tres Virgenes, BCS

    Energy Technology Data Exchange (ETDEWEB)

    Tapia Salazar, Ruth [Comision Federal de Electricidad (Mexico)]. E-mail: ruth.tapia@cfe.gob.mx

    2007-01-15

    Silica scaling is one of the most important problems in the Las Tres Virgenes geothermal field. It affects not only the superficial installations, like brine injection pipelines, but also the injection wells where it reduces injection capacity. Separated brine passes from production wells to injection wells by means of steel pipelines 10 and 14 inches in diameter. The pipelines are affected by silica scaling that occurs when the two-phase fluid is discharged at atmospheric pressure and the separated brine is cooled and concentrated and then over saturated with amorphous silica. Even when the pipelines were cleaned periodically, it was necessary to implement a technique for prevent scaling. Two methods considered appropriate to the specific field conditions were studied, and finally the technique of modifying the brine pH was adopted. After over a year of using this technique in the general injection system, no mechanical cleaning of the pipelines has been necessary-and once cleaning was needed at least every third day. This represents an important improvement in the steam supply system. [Spanish] Uno de los problemas mas importantes en el campo geotermico de Las Tres Virgenes es la incrustacion por silice, la cual afecta no solo a instalaciones superficiales como lineas de inyeccion de salmuera, sino tambien a los pozos inyectores al reducir su capacidad de aceptacion. El agua producida por los pozos productores se conduce hasta los pozos inyectores por medio de tuberias de acero al carbon de 10 y 14 pulgadas de diametro, que se ven afectadas por la incrustacion de silice. La incrustacion ocurre debido a que cuando el fluido en dos fases es descargado a presion atmosferica, la salmuera separada, enfriada y concentrada, esta usualmente sobresaturada con respecto a la solubilidad de la silice amorfa. Aunque las tuberias se limpiaban mecanicamente, fue necesario seleccionar una tecnica para prevenir la incrustacion, para lo cual se estudiaron dos de los metodos que

  17. A fly-wheel drive with controlled-torque clutch for a reactors cooling circuit pumps; Entrainement des pompes du circuit de refrigeration d'un reacteur par volant a embrayage sous couple controle

    Energy Technology Data Exchange (ETDEWEB)

    Riettini, A [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1964-10-15

    After a theoretical study on the slowing down of a centrifugal pump, the motion equations have been checked by means of experimental tests. In order to have important slowing down times (which is the case of the cooling pumps of a research reactor) it is necessary to add a fly-wheel. To prevent troubles when starting, a block pump-fly-wheel with clutch under controlled torque was developed. It is so possible to start the fly-wheel progressively without increasing too much power of the driving motor. (author) [French] Apres une etude theorique sur le mouvement de ralentissement d'une pompe centrifuge, les equations du mouvement ont ete verifiees par des essais pratiques. Pour obtenir des temps de ralentissement importants (cas des pompes de refrigeration d'un reacteur de recherche) il est necessaire d'y adjoindre un volant d'inertie. Pour eviter les inconvenients au demarrage, on a etudie un ensemble pompe-volant avec embrayage sous couple controle. Cette solution permet de lancer progressivement le volant sans augmentation appreciable de la puissance du moteur d'entrainement. (auteur)

  18. Renovation and optimisation of the heat-pump installation in the 'Bachtla' sport centre in Bettmeralp, Switzerland; Renovation und Betriebsoptimierung der Waermepumpenanlage des Sportzentrums Bachtla in Bettmeralp

    Energy Technology Data Exchange (ETDEWEB)

    Borel, J.-Ph.

    2004-07-01

    This final report for the Swiss Federal Office of Energy (SFOE) presents an overview of the results obtained from a pilot and demonstration project supported by the Swiss Confederation and the Canton of Valais. The main features of the project are its ground-water based heat production using a standard heat pump, temperature levels adapted to individual users and also the supply of cold water for cooling. The purpose of the study was to check if a high coefficient of performance (COP) was compatible with the fulfilment of the above-mentioned objectives. The main results of the project are presented including quantitative results on heating power and COP as well as qualitative results concerning heat-pump reliability, load-following characteristics and control system performance.

  19. Physical protection of nuclear installations

    International Nuclear Information System (INIS)

    Toepfer, K.

    1989-01-01

    This contribution investigates the possible danger and the legal basis of physical protection and explains the current, integrated system provided for, as well as the underlying possible scenarios of an assault: (1) by a violent crowd of aggressors outside the installation, (2) by a small group of aggressors outside the installation, (3) by a person allowed to enter (internal assault). The physical protection system supplements the internal safety measures to enhance protection against hypothetical and possible acts of terrorism or other criminal assault. The system covers external and internal controlled areas, access monitoring, physical protection control room and service, security checks of the personnel, and activities to disclose sabotage. Some reflections on the problem field between security controls and the constitutional state conclude this contribution. (orig./HSCH) [de

  20. Safety of nuclear installations in Slovakia

    International Nuclear Information System (INIS)

    1998-01-01

    In this part next aspects are described: (1) Site selection (Legislation related to site selection; Meeting criteria at Bohunice and Mochovce sites; International agreements); (2) Design preparation and construction (Designing and construction-relevant legislation; Nuclear installation project preparation of nuclear installation at Mochovce site); (3) Operation (Operator licensing procedure; Operation limits and conditions; Maintenance testing and control documentation for management and operation; Technical support of operation; Analysis of events at nuclear installations and Radioactive waste production); (4) Planned safety upgrading activities at nuclear installations

  1. ANALYSE DES PERCEPTIONS LOCALES ET DES FACTEURS ...

    African Journals Online (AJOL)

    AISA

    1Faculté des Sciences Agronomiques (FSA), Université d'Abomey-Calavi (UAC), 01 BP 526 Cotonou Bénin. Email : cgbemavo@yahoo.fr. 2Institut National des Recherches Agricoles du Bénin, Centre de Recherches Agricoles d'Agonkanmey (CRA-A),. Laboratoire des Sciences du Sol, Eau et Environnement (LSSEE).

  2. Instruments used to measure or check {alpha}, {beta}, {gamma} activity and neutron emission in the course of processing ore or irradiated fuel; Appareils de mesure ou de controle {alpha}, {beta}, {gamma}, n, des circuits des usines de traitement du minerai ou du combustible irradie

    Energy Technology Data Exchange (ETDEWEB)

    Blanc, A; Brunet, M; Kermagoret, M; Labeyrie, J; Roux, G; Vasseur, J; Weil, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1959-07-01

    One of the methods checking ores in the course of treatment is the rapid quantitative determination of thorium. This measurement is carried out by means of a scintillation instrument which shows the {beta} and {alpha} coincidences of ThC and ThC'. The treatment of irradiated fuel is accompanied by a large number of radioactive checks relative to the performance of the fixation and elution operations of uranium in the ion exchangers, to the concentration of radioactivity of effluent sent from the plant into watercourses. The operations of fixation and elution of the uranium are checked automatically by an instrument which takes a sample of 5 cm{sup 3} of solution, evaporates it and measures its activity every 10 or 20 minutes. Plutonium concentrations are measured: - in the presence of strong {beta} {gamma} activities, by means of rotating cylinder detectors; - in the presence of weak {beta} {gamma} activities, by means of {alpha} detectors scanning a constant level liquid surface; - by means of fission chambers relatively insensitive to {gamma}. Fission product concentrations are measured by chambers, counters or scintillators, according to the amount of {gamma} activity present. Finally, the activity of effluent to be emptied into watercourses is checked by means of a scintillation instrument, which measures the {alpha} activity on the one hand, and on the other hand the {beta} {gamma} activity of residue from a 100 cm{sup 3} sample taken and evaporated in 20 minutes. (author) [French] Parmi les controles relatifs au minerai en cours de traitement, figure le dosage rapide de thorium. Cette mesure est realisee au moyen d'un appareillage a scintillation qui met en evidence la coincidence des emissions {beta} et {alpha} du ThC et du ThC'. Le traitement des combustibles irradies s'accompagne d'un grand nombre de controles radioactifs portant sur le fonctionnement des operations de fixation et d'elution de l'uranium dans les echangeurs d'ions, sur la concentration du

  3. Installation package for the Solaron solar subsystem

    Science.gov (United States)

    1979-01-01

    Information that is intended to be a guide for installation, operation, and maintenance of the various solar subsystems is presented. The subsystems consist of the following: collectors, storage, transport (air handler) and controller for heat pump and peak storage. Two prototype residential systems were installed at Akron, Ohio, and Duffield, Virginia.

  4. Fonctionnement transitoire et controle de la richesse des moteurs à allumage commandé à injection multipoint Transient Operation and Air-Fuel Ratio Control of Spark-Ignition Port-Injected Engines

    Directory of Open Access Journals (Sweden)

    Le Moyne L.

    2006-12-01

    Full Text Available Sur les moteurs à allumage commandé à injection multipoint on observe des désadaptations de richesse lors de fonctionnement transitoire. Ces désadaptations sont dues au dépôt, sous forme de film liquide, du carburant injecté dans le collecteur. Elles peuvent être compensées par une gestion adéquate de la masse injectée. Ainsi, afin d'obtenir la masse de carburant qui maintient la richesse constante, nous avons développé un modèle bidimensionnel des écoulements dans le collecteur au cours du cycle moteur. Ce modèle décrit l'écoulement des gaz frais, des gouttes injectées, des gaz brûlés refoulés vers l'admission et du film sur les parois, sur le principe de la séparation des phases. Nous montrons que le modèle reproduit correctement le signal de richesse et comment il permet de supprimer les désadaptations. La mesure de richesse est faite à l'échappement avec une sonde à oxygène dont nous validons le fonctionnement en transitoire avec une corrélation à la pression maximale du cycle dans le cylindre. Air-fuel ratio excursions are observed on port-injected spark ignition engines during transients. This excursions result from the liquid fuel film deposited on intake port. They can be compensated by controlling the injected fuel mass. In order to have the amount of fuel that keeps air-fuel ratio constant, we have developed a 2D model of flows in the intake port during engine cycle. This separate phases model describes the flow of fresh gases, injected droplets, hot burned gases and film on port walls. We show that the model effectively predicts the equivalence ratio and how it allows to eliminate excursions. Equivalence ratio measures are made with an oxygen sensor which functioning is validated during transients by correlating it to maximal pressure during engine cycle.

  5. Organisation des travaux ST-CV

    CERN Document Server

    Martel, C; CERN. Geneva. ST Division

    2003-01-01

    Débutée il y a deux ans, la phase de construction des installations de refroidissement du LHC a atteint en 2003 son apogée. De nombreux autres projets sont également gérés par le groupe dans divers secteurs du laboratoire. La spécificité du groupe est de réaliser des installations complexes impliquant des spécificités diverses telles qu’aéraulique, hydraulique, électrique, etc. Pour faire face à ces demandes la section travaux du groupe ST CV a adopté une structure capable de réaliser ces divers projets avec un minimum de personnel. La première partie de ce document décrit l’organisation de la section travaux ST CV. Dans une deuxième partie, les auteurs dressent un état des lieux des chantiers par projet en décrivant plus particulièrement les activités dans les domaines du traitement d’air et de refroidissement par eau.

  6. Annales des Sciences Agronomiques - Vol 16, No 2 (2012)

    African Journals Online (AJOL)

    Effet de la monoculture des poacees sur le controle de Hyptis suaveolens ... Dynamique des champignons endomycorhiziens dans les jachères manioc sur ... de gestion de la fertilité des sols dans la commune de ouaké au Nord-Ouest du ...

  7. Process optimisation of lime milk leaching and control of cold lime softening at the power plant STEAG Fenne; Optimierung des Kalkansatzes und Regelung der Kalkmilchdosierung in der KZA des STEAG-Kraftwerks Fenne

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Christian [Steag Kraftwerk Fenne, Voelklingen (Germany). Anlagentechnik; Arenz, Helmut [Steag Kraftwerk Fenne, Voelklingen (Germany). Technischer Service; Wysk, Ralf [NALCO Deutschland GmbH, Frankfurt am Main (Germany). National Account Managing Kraftwerke

    2013-06-01

    An increase in turbidity in the cleaned water of the cold lime softener higher than the raw water input of the river Saar was observed at the Fenne site at some days in 2009. Also the post-installed sand filter could not restrain the fine particles. Under these circumstances the demineralisation water production had serious problems because of heavily fouled membranes in the reverse osmosis system. Only the immense personal actions of the operating staff could enable the reliability of the water preparation system on site. Together with Nalco the power plant service department implemented a plant audit on site. The purpose of the plant audit was to find the reason for the bottleneck in water preparation and to optimise and automate the water treatment system under the aspects of economical reliability and control efficiency. (orig.)

  8. Release monitoring and environmental surveillance of Cea centers. Assessment and regulation and method 1999; Controle des rejets et surveillance de l'environnement des centres CEA. Bilan et reglementation et methode 1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    The quality of the natural environment around the centers of the Commissariat a l Energie Atomique is an important point of its safety policy. The environmental protection is based on the control of risks coming from research and development activities of its installations. It aims to reduce as low as possible, the impact of its activities on man and his environment. This publication develops the sampling and measurement methods that are made on effluents and in environment, according to the radionuclides characteristics, that are present. It gives also the regulation that applied to the effluents monitoring. The results of radioactive effluents releases (liquid and gaseous) and the surveillance of environment around cea centers is given in the 'Bilan 1999' publication. An analysis of these results on the 1995-1999 period allows to follow their evolution. (N.C.)

  9. Plant Measurement, Sampling and Analysis for Accountancy Purposes with Particular Reference to Separation Plants at Windscale; Mesures, Echantillonnages et Analyses en Usine a des Fins Comptables, Notamment dans les Installations de Separation de Windscale; Izmereniya, vzyatie obraztsov i analizy v tselyakh ucheta na opyte ustanovki razdeleniya radioizotopov v uindskejle; Medicion, Muestreo y Analisis para Fines Contables, Especialmente en las Plantas de Separacion de Windscale

    Energy Technology Data Exchange (ETDEWEB)

    Davidson, A. S.; Elliott, F.; Powell, R.; Swinburn, K. A. [United Kingdom Atomic Energy Authority, Windscale and Calder Works, Cumberland (United Kingdom)

    1966-02-15

    ) titrimetrie, e) dilution isotopique suivie de spectrometrie de masse, et f) spectrometrie differentielle. Ils soulignent egalement les methodes de dosage de l'uranium, notamment les suivantes: a) gravimetrie de U{sub 3}O{sub 8}. b) extraction a l ' ether suivie de gravimetrie ou de colorimetrie, c) titrimetrie, d) dilution isotopique suivie de spectrometrie de masse, et e) determination de l'enrichissement par spectrometrie de masse ou spectrographie des emissions accompagnees d'un deplacement des raies. Pour toutes les methodes comptables, on utilise des etalons pour assurer le controle de la qualite et faire ressortir toute inexactitude qu'il est necessaire de corriger. Les auteurs indiquent la precision de chaque methode et enumerent les methodes effectivement utilisees dans la nouvelle usine de separation. (author) [Spanish] Todas las cifras destinadas a la contabilidad de materiales especiales corresponden por lo menos a uno de los tres parametros siguientes: medicion en la planta, muestreo y analisis. Para las mediciones en la planta conviene emplear la pesada siempre que sea posible; por ejemplo, la cantidad de plutonio que entra en la nueva planta de separacion de Windscale se calcula a base del peso de las barras de uranio. Los autores exponen los metodos de medicion de volumenes: a) 'pneumercator', y b) empleo de cesio radiactivo como indicador, y evaluan la exactitud y precision de cada uno de esos metodos. El muestreo de soluciones en un proceso intermitente se efectua con tubos evacuados despues de homogeneizar la solucion. Para las corrientes 'continuas' , que requieren mucha exactitud, se ha ideado un dispositivo de muestreo continuo que se emplea a la entrada de la nueva planta de separacion. En Windscale, el metodo normal de muestreo consiste en taladrar lingotes metalicos; para otros solidos se sigue la practica de homogeneizar todo lo posible el material antes de tomar la muestra (para el oxido de plutonio, por ejemplo, se emplea una mezcladora conica en Y

  10. 3D Projection Installations

    DEFF Research Database (Denmark)

    Halskov, Kim; Johansen, Stine Liv; Bach Mikkelsen, Michelle

    2014-01-01

    Three-dimensional projection installations are particular kinds of augmented spaces in which a digital 3-D model is projected onto a physical three-dimensional object, thereby fusing the digital content and the physical object. Based on interaction design research and media studies, this article ...... Fingerplan to Loop City, is a 3-D projection installation presenting the history and future of city planning for the Copenhagen area in Denmark. The installation was presented as part of the 12th Architecture Biennale in Venice in 2010....

  11. TESLA accelerator installation

    International Nuclear Information System (INIS)

    Neskovic, N.; Ostojic, R.; Susini, A.; Milinkovic, Lj.; Ciric, D.; Dobrosavljevic, A.; Brajuskovic, B.; Cirkovic, S.; Bojovic, B.; Josipovic, M.

    1992-01-01

    The TESLA accelerator Installation is described. Its main parts are the VINCY Cyclotron, the multiply charged heavy-ion mVINIS Ion Source, and the negative light-ion pVINIS Ion Source. The Installation should be the principal installation of a regional center for basic and applied research in nuclear physics, atomic physics, surface physics and solid state physics, for production of radioisotopes, for research and therapy in nuclear medicine. The first extraction of the ion beam from the Cyclotron is planned for 1995. (R.P.) 3 refs.; 1 fig

  12. Le vernis des apparences

    Directory of Open Access Journals (Sweden)

    Grazia Nicosia

    2010-04-01

    Full Text Available Le but de cet article est de comprendre l’incidence sémiotique du nettoyage d’un tableau ainsi que la résultante cognitive induite sur l’observateur. Cette étude confronte l’analyse des phénomènes visuels engendrés par le jaunissement du vernis et son retrait, à des entretiens réalisés à dessein. Le retrait d’un vernis jauni change considérablement l’image. L’heure, le climat, la saison et l’activité même des personnages s’en trouvent ainsi modifié. La patine peut être perçue, soit comme un obstacle à l’exploration, soit pour ceux qui l’apprécient, comme le medium d’une relation plus intime entre l’œuvre et l’observateur.The purpose of this article is to understand the semiotic impact of the cleaning of a painting and the cognitive effects induced on the observer. This study analyses conjointly the visual phenomenon generated by yellowing varnish and its removal and controlled interviews of observers.The removal of yellowing varnish modifies considerably the perception of the picture. Daytime, climate, season and characters activities are modified. The patina may be perceived either as an obstacle to the painting exploration, or, for those who appreciate it, as a medium for a closer relationship between the painting and the observer.

  13. Method of installing well conductors

    International Nuclear Information System (INIS)

    Houser, D.M.

    1991-01-01

    This patent describes a method of installing a well conductor in a marine environment. It comprises sealing a well conductor with a watertight plug; submerging the conductor from an elevated platform; adding additional conductor lengths to the conductor as needed thereby forming a conductor string; adjusting the buoyancy of the string to control the lowering of the string to the sea floor; and drilling through the plug after the conductor string has achieved the desired penetration depth

  14. Construction, fabrication, and installation

    International Nuclear Information System (INIS)

    1992-05-01

    This standard specifies the construction, fabrication, and installation requirements that apply to concrete containment structures of a containment system designated as class containment components, parts and appurtenances for nuclear power plants

  15. Visiting the SPS installation

    CERN Multimedia

    1975-01-01

    ...., Guenther Loehr, Hans Horisberger walk along the SPS tunnel: here, on the right, an absorber block of 22 tons for beam dumping in the external beam lines. The chariot serves for the installation of the block.

  16. Biggest semiconductor installed

    CERN Multimedia

    2008-01-01

    Scientists and technicians at the European Laboratory for Particle Physics, commonly known by its French acronym CERN (Centre Europen pour la Recherche Nuclaire), have completed the installation of the largest semiconductor silicon detector.

  17. A heat pump coupled to geothermal probes for heating and cooling of a small to medium sized enterprise; Pompe a chaleur sur sondes geothermiques pour chauffer et refroidir une PME. Installation de chauffage et de climatisation des bureaux et des ateliers de l'entreprise Roger Seematter SA a St-Legier

    Energy Technology Data Exchange (ETDEWEB)

    Luthi, M.; Seematter, R. [Roger Seematter SA, St-Legier/Vevey (Switzerland)

    2004-07-01

    The new building of Roger Seematter SA near Vevey, southwestern Switzerland, contains workshops and offices having a useful floor area of about 1100 m{sup 2}. Space heating and cooling is provided by a reversible water-water heat pump coupled to vertical geothermal probes. The estimated heating power amounts to 27-30 kW, the estimated cooling power during summer 21 kW. Three vertical geothermal probes of 150 meters length are used as heat source in winter and are also used for recharging the ground in summer. The energy efficiency of the installation was monitored from October 2002 to June 2004 yielding a coefficient of performance of the heat pump lying between 3.7 and 3.9, and a coefficient of performance for the whole system of 3.2 to 3.4. The investment cost for the whole system amounts to CHF 193'000, the investment for a conventional heating system with an oil-fired boiler would have been CHF 105'000.

  18. Detection of {alpha} particles using semiconductors. Application to the control of plutonium extraction; Detection des particules {alpha} par semiconducteurs application au controle de l'extraction du plutonium

    Energy Technology Data Exchange (ETDEWEB)

    Tanguy, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-03-01

    A study is made of a particles produced by thick sources, using either diffused junction or surface barrier semiconductor detectors for controlling continuously the plutonium extraction process. For this, a presenting apparatus is described in which the solutions to be analyzed flow in contact with the detector protected by a thin mica membrane. A method is described which gives a precise recording of the spectra and which thus allows the separation of two or more {alpha} emitters present in the same solution. This method has been applied to the measurement of {sup 239}Pu in the the presence of {sup 241}Am with an accuracy of {+-}5 per cent. In the second part of the report is considered the detection of plutonium in solutions of {beta} - {gamma} emitting fission products. Pile-up is reduced by using a fast amplification chain associated to totally depleted thin detectors. Under these conditions a few mg of {sup 239}Pu can be detected in solutions of fission products having an activity of 100 curies/liter. A method is given for discriminating {alpha} and {beta} particles, it is based on the difference in the collection times for the charges liberated by these particles in the detector. (author) [French] On etudie la detection de particules {alpha} issues de sources epaisses par detecteurs semiconducteurs a jonction diffusee ou a barriere de surface pour le controle continu du procede d'extraction du plutonium. A cet effet on decrit un appareil presentateur dans lequel les solutions a analyser circulent au contact du detecteur protege par une membrane mince de mica. On decrit une methode qui permet par le trace precis des spectres de separer deux ou plusieurs emetteurs {alpha} presents dans une meme solution. Cette methode a ete appliquee a la mesure du {sup 239}Pu en presence de {sup 241}Am avec une precision de {+-} 5 pour cent. Dans la deuxieme partie on traite de la detection du plutonium dans des solutions de produits de fission emetteurs {beta} and {gamma

  19. The thermo-technical optimization in the evaporator by a targeted selection of refractory systems. Calculations and evaluation, installation of a tailor-made refractory system, results from the practice; Waermetechnische Optimierung im Dampferzeuger durch gezielte Auswahl von Feuerfestsystemen. Berechnungen und Bewertungen, Installation des massgeschneiderten Feuerfestsystems, Ergebnisse aus der Praxis

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Karl-Ulrich [Mokesa AG, Birsfelden (Switzerland). Marketing/Verkauf; Hofmans, Erik [ISVAG, Wilrijk (Belgium). Technischer Dienst/Instandhaltung; Kern, Tobias [Mokesa AG, Birsfelden (Switzerland); Hoeff, Jos van der [Mokesa Benelux B.V., Limmen (Netherlands)

    2013-03-01

    The thermo-technical optimization of existing incinerator boilers with the benefit of a stabilised combustion and a low consumption of fossil fuels in order to meet the rules at a temperature of 850 Celsius for a time period of two seconds even at partial load and low-calorific fuel (waste) is state of the art by means of CFD modelling and its successful transformation into the practice with proven and tailor-made refractory systems. The direct, straight and sustainable economical use is in an enhanced throughput of waste materials, a reduced consumption of fuels and thus a conservation of CO{sub 2}. The stabile combustion control is with a poor readjustment is an important and assuring advantage for the operations manager.

  20. Étude et mise en pratique d'un service autour des produits

    OpenAIRE

    Anthony Peguet

    2013-01-01

    Depuis une vingtaine d'années, nous assistons à une démocratisation des services dans les entreprises industrielles. De nombreux types de services autour des produits sont ainsi mis en place : installation de matériels, assistance, formations, etc. Un des objectifs principal de la mise en place de ces différents services est l'augmentation de l'attachement des clients à l'entreprise. Cette fidélité permet d'engendrer des profits directement et indirectement. Directement par l'augmentation du ...

  1. The French market of electrical equipment and installation. Control over energy consumption, environmental law and new markets to be conquered draw perspectives for the sector

    International Nuclear Information System (INIS)

    2012-12-01

    This article presents the content of a market study which aimed at identifying the size and dynamics of the French industry of electrical equipment and installation, at comparing financial performance of equipment manufacturers and of installation major companies, at analysing strategies developed by operators to take benefit of growth opportunities in the field of energy efficiency, at identifying new markets to be conquered, and at anticipating capitalistic evolutions. Fifteen companies are presented and analysed within this perspective: ABB, Alstom, Areva, ETDE, General Electric, GDF Suez, the Energy pole of Eiffage, Legrand, Nexans, Rexel, Schneider Electric, Siemens, Sonepar, Spie, and Vinci Energies

  2. Minimisation of loads on the azimuthal drive by control of the slip brake momentum; Minimierung der Azimutantriebsbelastungen durch Steuerung des Schleifbremsen-Momentes

    Energy Technology Data Exchange (ETDEWEB)

    Boehmeke, G. [PVO Engineering OY, Helsinki (Finland)

    2000-07-01

    The influence of the slip brake momentum on the load acting on the azimuthal drives is investigated and is minimised by a variable, optimised braking momentum. An option for automatic control is proposed. Measures to improve the availability of wind power systems in cold climates were developed in the context of a development study, including closer investigations of the azimuthal region. [German] Der Einfluss des Schleifbremsenmomentes auf die Belastung der Azimut-Verstellantriebe wird untersucht und durch variables stets optimales Bremsmoment minimiert. Eine Option zur automatisierten Steuerung wird vorgeschlagen. Im Rahmen einer Entwicklungsstudie wurden Massnahmen zur Erhoehung der Betriebssicherheit von Windkraftanlagen in kaltem Klima ausgearbeitet, und unter anderem auch der Azimutbereich naeher untersucht. (orig.)

  3. Examination of vegetation around a nuclear plant emitting gaseous fluorides in order to detect fluorine pollution; Utilisation des vegetaux pour detecter la pollution fluoree autour d'une usine susceptible d'emettre des effluents gazeux fluores

    Energy Technology Data Exchange (ETDEWEB)

    Teulon, Francoise; Bonnaventure, J. P. [Commissariat a l' energie atomique et aux energies alternatives - CEA, Centre de Pierrelatte, Section de Protection contre les Radiations (France)

    1971-08-15

    Fluorine pollution (chronic or occasional) around a plant rejecting gaseous fluoride effluents can be detected from vegetation samples by chemical analysis. Systematic monitoring allows the effects and gravity of the pollution to be estimated. The analytical method used consists of a double distillation (in phosphoric acid and perchloric acid) followed by a spectro-colorimetric analysis (alizarine-complexon-lanthane). This method of control allows both the efficiency of the trapping installations and also the appearance of effluents at unexpected places to be checked, In the event of an accident it is possible to determine the advisability of prohibiting the consumption of locally grown produce by humans or fodder by cattle. Research conducted in order to determine the relation between visible, damage to certain vegetables (tomatoes, haricot beans and sorghum) and their fluorine contents demonstrated that such a relation appears above all at the level of the leaves; chemical analysis may thus be used to confirm or reject information obtained on the basis of visual evidence [French] La detection d'une pollution fluoree (chronique ou accidentelle) autour d'une usine susceptible d'emettre des effluents gazeux fluores peut etre avantageusement realisee par un reseau de prelevements vegetaux suivis de dosages chimiques. Une surveillance systematique permet une evaluation des consequences et du degre de gravite de la pollution. La methode d'analyse consiste en une double distillation (dans l'acide phosphorique et l'acide perchlorique) suivie d'une spectrocolorimetrie (alizarine-complexon-lanthane). Ce mode de controle permet non seulement de verifier si les installations de piegeage sont efficaces mais egalement de localiser des points d'emission imprevus. En cas d'accident, on peut egalement juger de l'opportunite d'interdire la consommation des legumes par les habitants ou du fourrage par le betail des environs. Enfin, des etudes experimentales ont ete realisees pour

  4. The energy sector between the two poles of the free market system and the public service obligations. Potential and limitations of state control, with an emphasis on the act for reform of the energy industry law (ENG) and the EU Internal Market Directive; Der Energiesektor zwischen Marktwirtschaft und oeffentlicher Aufgabe. Moeglichkeiten und Grenzen staatlicher Steuerung unter besonderer Beruecksichtigung des Gesetzes zur Neuregelung des Energiewirtschaftsrechts und des Europarechts

    Energy Technology Data Exchange (ETDEWEB)

    Hoelzer, F.

    2000-07-01

    In Part A of the book it will be brought out that despite differing conceptual starting points and despite state control's way of working, there is no alternative to legal control. In co-operative models and consensual solutions in those states with private sector service providers, which exist in diverse forms in the energy sector, too, the law operates as a framework or regulatory warning, or it has a reserve function. An end to state control is not linked to that because the state remains responsible for the achievement of the goals the notification ans definition of which it undertakes as a public duty. The results found are discussed and confirmed in Part B of the book in connection with the reform of the legal framework of the energy industry (the German act named ENG). In Part C of the book it will be shown to what extent legal constitutional limitations stand in the way of state control in the energy sector. (orig./CB) [German] Im ersten Teil der Arbeit wird staatliche Steuerung durch Recht an Beispielen des Energiesektors untersucht, wobei insbesondere Fragen des Wirkens und der Erscheinungsformen staatlicher Steuerung sowie die Auswirkungen der Veraenderung staatlicher Steuerung auf die Rolle des Staates und auf das Verhaeltnis von Staat und Gesellschaft im Vordergrund stehen. Im zweiten Teil werden unter besonderer Beruecksichtigung der europarechtlichen Regelungen die Moeglichkeiten, rechtliche Grenzen und Maengel staatlicher Steuerung im bisherigen System der Elektrizitaetsversorgung in Deutschland dargestellt, da Reformen, um dem Steuerungsanspruch des Staates gerecht zu werden, diesezu beachten haben. Es wird u.a. untersucht, inwieweit Entstaatlichungsstrategien im Rahmen der Reformen im Energiesektor Anwendung finden. Im dritten Teil werden die verfassungsrechtlichen Restriktionen untersucht. (orig./CB)

  5. Articulated, Performance-Based Instruction Objectives Guide for Air Conditioning, Refrigeration, and Heating (Environmental Control System Installer/Servicer). Edition I.

    Science.gov (United States)

    Henderson, William Edward, Jr., Ed.

    This articulation guide contains 17 units of instruction for the first year of a two-year vocational program designed to prepare the high school graduate to install, maintain, and repair various types of residential and commercial heating, air conditioning, and refrigeration equipment. The units are to introduce the student to fundamental theories…

  6. Capping off installation

    CERN Multimedia

    2006-01-01

    Installation of the cathode strip chambers for the muon system on the CMS positive endcap has been completed. Technicians install one of the last muon system cathode strip chambers on the CMS positive endcap. Like successfully putting together the pieces of a giant puzzle, installation of the muon system cathode strip chambers on one of the CMS endcaps has been completed. Total installation of the cathode strip chambers (CSC) is now 91 percent complete; only one ring of chambers needs to be mounted on the remaining endcap to finish installation of the entire system. To guarantee a good fit for the 468 total endcap muon system CSCs, physicists and engineers from the collaboration spent about 10 years carefully planning the design. The endcap muon system's cables, boxes, pipes and other parts were designed and integrated using a 3D computerized model. 'It took a long time to do all the computer modelling, but in the long run it saved us an enormous amount of time because it meant that everything fit together,...

  7. The dismantling of nuclear installations

    International Nuclear Information System (INIS)

    Lacoste, A.C.; Duthe, M.; Mignon, H.; Lambert, F.; Pradel, Ph.; Hillewaere, J.P.; Dupre la Tour, St.; Mandil, C.; Weil, L.; Eickelpasch, N.; Finsterwalder, L.

    1997-01-01

    for nuclear installations, the dismantling is an important part of their exploitation. The technology of dismantling is existing and to get a benefit from the radioactive decay, it seems more easy for operating company such E.D.F. to wait for fifty years before dismantling. But in order to get the knowledge of this operation, the Safety Authority wanted to devote this issue of 'Controle'to the dismantling method. This issue includes: the legal aspects, the risks assessment, the dismantling policy at E.D.F., the site of Brennilis (first French experience of dismantling), the dismantling techniques, the first dismantling of a fuel reprocessing plant, comparison with classical installations, economic aspect, some German experiences, the cleansing of the american site of Handford. (N.C.)

  8. Glossaire des sigles

    OpenAIRE

    2015-01-01

    ABM Anti-ballistic missile = Missile antimissile balistique AGM Air-to-ground missile = Missile air-sol AIEA Agence Internationale de l’Energie Atomique ALCM Air-launched cruise missile = Missile de croisière air-sol ANSEA Association des Nations du Sud-Est asiatique ANT* Arme nucléaire tactique ASAT Anti-satellite = Arme antisatellite ASW Anti-submarine warfare = Guerre anti-sous-marine AWACS Airborne warning and control system = Système aérien de contrôle et d’alerte BMD Ballistic missile d...

  9. variabilite des productions et des revenus des exploitations

    African Journals Online (AJOL)

    3Centre de coopération internationale en recherche agronomique pour le développement (CIRAD), UMR Innovation,. Montpellier, France. Doubangolo COULIBALY, Email kone_b@yahoo.fr. RESUME. La durabilité des systèmes de production à base de coton dans un contexte de variabilité des prix aux producteurs et de ...

  10. Python Introduction and Installation

    Directory of Open Access Journals (Sweden)

    William J. Turkel

    2012-07-01

    Full Text Available This first lesson in our section on dealing with Online Sources is designed to get you and your computer set up to start programming. We will focus on installing the relevant software – all free and reputable – and finally we will help you to get your toes wet with some simple programming that provides immediate results. In this opening module you will install the Python programming language, the Beautiful Soup HTML/XML parser, and a text editor. Screencaps provided here come from Komodo Edit, but you can use any text editor capable of working with Python. Here’s a list of other options: Python Editors. Once everything is installed, you will write your first programs, “Hello World” in Python and HTML.

  11. Python Introduction and Installation

    OpenAIRE

    William J. Turkel; Adam Crymble

    2012-01-01

    This first lesson in our section on dealing with Online Sources is designed to get you and your computer set up to start programming. We will focus on installing the relevant software – all free and reputable – and finally we will help you to get your toes wet with some simple programming that provides immediate results. In this opening module you will install the Python programming language, the Beautiful Soup HTML/XML parser, and a text editor. Screencaps provided here come from Komodo ...

  12. Electrical installations technology

    CERN Document Server

    Whitfield, J F

    1968-01-01

    Electrical Installations Technology covers the syllabus of the City and Guilds of London Institute course No. 51, the "Electricians B Certificate”. This book is composed of 15 chapters that deal with basic electrical science and electrical installations. The introductory chapters discuss the fundamentals and basic electrical principles, including the concept of mechanics, heat, magnetic fields, electric currents, power, and energy. These chapters also explore the atomic theory of electric current and the electric circuit, conductors, and insulators. The subsequent chapter focuses on the chemis

  13. Field installation and maintenance

    International Nuclear Information System (INIS)

    Prebble, R.E.

    1981-01-01

    The use of a neutron moisture meter for the determination of the water content of soil necessitates the installation of an access tube down which the probe can be lowered. Errors in neutron count rate will be introduced if water enters the air gap between a loose fitting tube and the soil. Errors may also be caused by changes in the soil structure resulting from the techniques for soil removal and from driving the access hole. Access tube materials and dimensions, methods of installation and maintenance of the site are discussed

  14. Contrôle des circuits auxiliaires des P.F.W. (arret machine 2004/2006)

    CERN Document Server

    Ottaviani, J

    2005-01-01

    Les PFW sont des nappes polaires installées sur les pôles des aimants du PS. Elles sont au nombre de 4 par unité d’aimant et constituées d’un circuit principal (dans lequel circule le courant désiré selon le cycle magnétique utilisé) et de circuits auxiliaires. Les circuits auxiliaires sont des enroulements de correction (boucles de tour et “pick-up” brasés sur les enroulements principaux). Pendant la variation du champ magnétique de l’aimant PS, on utilise des tensions induites dans ces circuits auxiliaires pour corriger les erreurs de champ dues aux pertes par courants de Foucault dans la chambre à vide. Chaque année, pendant l’arrêt machine, on vérifie si les caractéristiques des circuits auxiliaires correspondent aux normes (mesures des résistances des boucles de tours, résistances entre “pick-up” et isolation des circuits) afin de faire un suivi. Les 404 PFW sont ainsi vérifiées. Dans cette note, on ne relèvera que les PFW ayant des défauts (valeurs hors tolérances, ...

  15. Contrôle des Circuits Auxiliaires des P.F.W. (arrêt machine 2003/2004)

    CERN Document Server

    Ottaviani, J

    2004-01-01

    Les PFW sont des nappes polaires installées sur les pôles des aimants du PS. Elles sont au nombre de 4 par unité d'aimant et constituées d'un circuit principal (dans lequel circule le courant désiré selon le cycle magnétique utilisé) et des circuits auxiliaires. Les circuits auxiliaires sont des enroulements de correction (boucles de tour et "pick-up" brasés sur les enroulements principaux). Pendant la variation du champ magnétique del'aimant PS, on utilise des tensions induites dans ces circuits auxiliaires pour corriger les erreurs de champ dues aux pertes par courants de Foucault dans la chambre à vide. Chaque année, pendant l'arrêt machine, on vérifie si les caractéristiques des circuits auxiliaires correspondent aux normes (mesures de résistances des boucles de tours, résistances entre "pick-up" et isolation des circuits) afin de faire un suivi. Les 404 PFW sont ainsi vérifiées. Dans cette note, on ne relèvera que les PFW ayant des défauts (valeurs hors tolérances, boucles ouvertes ...

  16. Vers des chaînes d'approvisionnement durables et éthiques ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Les personnes les plus vulnérables ont tendance à être des travailleurs à domicile dépendants, et la majorité d'entre elles sont des femmes qui travaillent dans des installations externes, souvent à partir de leur propre foyer. En tant que « travailleurs à domicile », ces personnes sont moins susceptibles d'être reconnues en ...

  17. Performances of nuclear installations in the world; Performances des installations nucleaires dans le monde

    Energy Technology Data Exchange (ETDEWEB)

    Pate, Z.T. [World Association of Nuclear Operators (WANO), 75 - Paris (France)

    1999-01-01

    During the last years the operators of nuclear power plants in the world, have realized numerous improvements. This success is imputable to several factors, especially an important data exchange. The Chernobyl accident, in 1986, provoked the creation of the World Association of Nuclear Operators (W.A.N.O.). It allowed to exchange information and to develop cooperation in order to go beyond cultural barriers, linguistics and policies. Then, operators in the world have brought important improvements in matter of safety, reliability. (N.C.)

  18. Report on the safety of wind turbines installations; Rapport sur la securite des installations eoliennes

    Energy Technology Data Exchange (ETDEWEB)

    Guillet, R.; Leteurtrois, J.P.

    2004-07-01

    This report aims to study the regulatory framework governing the safety of wind turbines and proposes improvement actions. It concerns the wind turbines risk assessment, the technical bases of the wind turbines safety, the regulation relative to the safety and possible evolutions. (A.L.B.)

  19. Installation of the ITER committee industry. Participants guide; Installation du Comite industrie ITER. Dossier des participants

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    ITER is an international project to design and build an experimental fusion reactor based on the tokamak concept. This guide presents the ITER project and objectives and the associated organizations in France, the recommendations and actions for ITER, the industrial mobilization, the industrial committee and its members, technological sheets for the enterprises and the statistical document of the SESSI. (A.L.B.)

  20. Expertise concerning the request by the ZWILAG Intermediate Storage Wuerenlingen AG for delivery of the operation licence for the conditioning installation as well as for the burning and melting installation of the central intermediate storage facility for radioactive wastes in Wuerenlingen; Gutachten zum Gesuch der ZWILAG Zwischenlager Wuerenlingen AG um Erteilung der Betriebsbewilligung fuer die Konditionierungsanlage sowie fuer die Verbrennungs- und Schmelzanlage des Zentralen Zwischenlagers fuer radioaktive Abfaelle in Wuerenlingen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-08-15

    On December 15, 1997, the Central Intermediate Storage Facility for radioactive materials (ZWILAG) delivered a request to the Swiss Federal Council for an operational licence for the conditioning installation and the incineration and melting installation at the Central Intermediate Storage Facility (ZZL). For the whole project, the general licence was granted on June 23, 1993. The construction of the whole installation as well as the operation in the storage halls with reception, hot cell and transhipment station were licensed on August 12, 1999. The Federal Agency for the Safety of Nuclear Installations (HSK) examined the request documentation of ZWILAG from the point of view of nuclear safety and radiation protection. The results of the examination are contained in this report. In general, the examination leads to a positive decision. During the realisation process many project adaptations have brought improvements to the installation as far as radiation protection and the treatment of wastes are concerned. HSK requests from a former licensing process were taken into account by ZWILAG. The present examination contains many remarks and requests that the HSK considers necessary. The most important remarks are issued as special references as far as they do not appear as proposals in the licence obligations. In general, the reference form was chosen when the fulfilment of the request can be guarantied by HSK within the framework of a release process. Several references inform ZWILAG of problems for which HSK wishes to receive the results of extended inquiries or where HSK will assist in testing or demonstrations. Other references concern requests for plant documentation. Further, calculations of radioactive material release during normal operation is considered as being necessary. Based on its examination, HSK concludes that the conditions are fulfilled for the safe operation of the conditioning installation and of the incineration and melting installation as long as

  1. Support to the Air Force Installation and Mission Support Center: Enabling AFIMSC’s Role in Agile Combat Support Planning, Execution, Monitoring, and Control

    Science.gov (United States)

    2017-06-23

    development, test, and evaluation; and supply chain management —and also quality-of-life support to military members, their families, retirees, and so on...AFIMSC and Air Education and Training Command Director of Logistics (AETC/A4) at a time when AFIMSC was being established to focus on managing the...operations of new ACS global management organizations.3 1 Program Action Directive (PAD) 14-04, Implementation of the Air Force Installation and

  2. Data available for the evaluation of the risks related to the bio-aerosols emitted by the domestic wastes storage; Donnees disponibles pour l'evaluation des risques lies aux bioaerosols emis par les installations de stockage des dechets menagers et assimiles

    Energy Technology Data Exchange (ETDEWEB)

    Delery, L.

    2003-12-15

    The dusts production during exploitation in cells is the main source of bio-aerosols emission in storage centers. This report presents data on biological characterization of domestic wastes and the related atmospheric emissions. It concludes that the sanitary risk for the residents is weak and the 200 m area decided by the regulation is sufficient. Meanwhile it is recommended to control the emission levels during particularly meteorological conditions as humid, windy and not very sunny. (A.L.B.)

  3. Enregistrements sedimentaires et controle tectonique dans la genese des archives morphosedimentaires quaternaires de la coupe d'alhnayn (Vallee Meridienne Du N'fis, Maroc

    Directory of Open Access Journals (Sweden)

    Benzakour, M.

    2002-12-01

    Full Text Available To show the response of fluvial and torrential morphodynamics to climatic variations and neotectonics in the semi-arid mountains, the authors present a preliminary geomorphological study of the main geosystem of the Alyhnayn area. This level is located in the upstream part of the intramountainous valley of N'fis river belonging to the northern side of High-Atlas. Its geomorphological analysis, based on the distribution of alluvial deposits and their characterization, reveals an alluvial-fans/terrace system. The latter is formed by a surface modeled on glacis and lacerated by more or less deep ravines. It is arbitrarily attributed to the middle Quatemary age. The geometric and the morpholithostratigraphic analysis of its deposits show a local control of a sedimentation of fluvialtorrential and gravitational types. A complex slop deposit is embedded within the fluvial sequences. It can be explained by a drop of the base level related to neotectonics. The sedimentation process is caused by the reactivation of a preexisting fault in relation with the High-Atlas elevation. The evolution of the Quatemary morphogenesis of the Alhnayn area has been influenced by uplift and climatic changes. Neotectonics controls fluvial and torrential dynamics by the local morphostructural framework. The fluvial and afluvial fans environments responded differently to recorder impacts.Nous présentons la réponse des paléoenvironnements ayant régi le géosysteme principal d7Alhanayn correspondant 2 un cycle morphoclimatique élémentaire, inscrit dans un domaine intramontagneux en cours de surrection, aux rythmes de l'érosion et de la sédimentation en caractérisant la part aux controles climatique et tectonique. Ce niveau se localise dans un segment amont de la vallée méridienne nord-atlasique drainée par l'oued N'fis. Son analyse géomorphologique met en évidence qu'il s'agit d'un systeme de cones-terrase modelé en sa surface en glacis lacéré par des ravins

  4. Magnetic compatibility of standard components for electrical installations: Computation of the background field and consequences on the design of the electrical distribution boards and control boards for the ITER Tokamak building

    International Nuclear Information System (INIS)

    Benfatto, I.; Bettini, P.; Cavinato, M.; Lorenzi, A. De; Hourtoule, J.; Serra, E.

    2005-01-01

    Inside the proposed Tokamak building, the ITER poloidal field magnet system would produce a stray magnetic field up to 70 mT. This is a very unusual environmental condition for electrical installation equipment and limited information is available on the magnetic compatibility of standard components for electrical distribution boards and control boards. Because this information is a necessary input for the design of the electrical installation inside the proposed ITER Tokamak building specific investigations have been carried out by the ITER European Participant Team. The paper reports on the computation of the background magnetic field map inside the ITER Tokamak building and the consequences on the design of the electrical installations of this building. The effects of the steel inside the building structure and the feasibility of magnetic shields for electrical distribution boards and control boards are also reported in the paper. The results of the test campaigns on the magnetic field compatibility of standard components for electrical distribution boards and control boards are reported in companion papers published in these proceedings

  5. Nuclear Installations Act 1969

    International Nuclear Information System (INIS)

    1969-01-01

    The purpose of this Act is to amend the Nuclear Installations Act 1965 to bring it into full compliance with the international conventions on nuclear third party liability to which the United Kingdom is a Signatory, namely, the Paris Convention, the Brussels Supplementary Convention and the Vienna Convention. (NEA) [fr

  6. Installation for producing sealed radioactive sources

    International Nuclear Information System (INIS)

    Fradin, J.; Hayoun, C.

    1969-01-01

    This installation has been designed and built for producing sealed sources of fission elements: caesium 137, strontium 90, promethium 147, ruthenium 106 and cerium 144 in particular. The installation consists of sealed and protected cells, each being assigned to a particular production. The safety and the operational reliability of the equipment are the principal considerations which have governed this work. The report describes the installation and, in particular, the apparatus used as well as the various control devices. In conclusion, a review as presented of six years operation. (authors) [fr

  7. Terre des hommes

    CERN Multimedia

    Staff Association

    2012-01-01

    Transformez votre téléphone portable en geste de solidarité ! Collecte du 12 au 23 novembre 2012   Faites un geste simple et utile en déposant vos téléphones portables inutilisés dans les urnes installées dans les trois restaurants du CERN. En Suisse, une personne change tous les 12 à 18 mois de téléphone portable. La plupart de nos vieux appareils sont simplement laissés à l’abandon avec comme seule fonction de parer une éventuelle panne à venir. On  estime ainsi que 8 millions de portables sont inutilisés, alors qu'entre 30 et 50% peuvent être réutilisés. L'action Solidarcomm leur offre une deuxième vie ! Terre des Hommes Suisse, dans le cadre de la campagne Solidarcomm, collecte et valorise vos téléphones inutilis&...

  8. Installation package for a sunspot cascade solar water heating system

    Science.gov (United States)

    1980-01-01

    Solar water heating systems installed at Tempe, Arizona and San Diego, California are described. The systems consist of the following: collector, collector-tank water loop, solar tank, conventional tank, and controls. General guidelines which may be utilized in development of detailed installation plans and specifications are provided along with instruction on operation, maintenance, and installation of solar hot water systems.

  9. Civili, langue des Baloango

    DEFF Research Database (Denmark)

    Mavoungou, Paul Achille; Ndinga-Koumba-Binza, Hugues Steve

    , Congo, Angola, etc.) issus de la décolonisation. Il présente de façon succincte quelques phénomènes historiques, phonologiques, morphosyntaxiques, homonymiques et analogiques de la langue. Des faits sémantiques des emprunts linguistiques y sont également décrits dans le cadre des changements...

  10. installations involontaires : étude transnationale sur les inégalités ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    installations involontaires : étude transnationale sur les inégalités et la pauvreté urbaines. Il se produit des déplacements involontaires de populations en milieu urbain lorsque des gens sont forcés de partir de chez eux, que ce soit à cause d'un projet de développement, d'un conflit ou d'une catastrophe naturelle.

  11. The latest electrical installation (I)

    International Nuclear Information System (INIS)

    Won, Jong Su

    1976-04-01

    This book deals with the latest electrical installation. The contents of this book are construction electrical installation, regulations related electrical installation, foundation and principle of wiring, main line feeder, lighting installation, power of wiring, main line feeder, lighting installation, power installation, method to read structure drawing for electrical construct drawing electric lamp wiring diagram, working drawing, material and tools and method of construction of electrical installation on types of wiring construction, metallic conduit, rigid poly-vinyl conduit wiring, bus duct work, cable work and insulation out of metal lathed.

  12. The System for Controlling Source and Special Nuclear Material at the Eurochemic Reprocessing Plant; Systeme de Controle des Matieres Nucleaires Brutes et Speciales a l'Usine de Traitement D'Eurochemic; Sistema kontrolya nad iskhodnym i spetsial'nym yadernym materialom na zavode evrokhimicheskoj kompanii po regeneratsii yadernogo topliva; Control de Materiales Nucleares Basicos y de Materiales Fisionables Especiales en la Planta de Regeneracion de la Eurochemic

    Energy Technology Data Exchange (ETDEWEB)

    Frenzel, W.; Schueller, W. [EUROCHEMIC, MOL (Belgium)

    1966-02-15

    Eurochemic is constructing a reprocessing plant near Mol (Belgium). The main characteristics of the plant and the different process steps are summarized. To maintain proper control of source and special nuclear material, the facilities of the company are divided into material balance areas. All transfers into and out of these areas are determined. Depending on their significance for the overall material balance, different precision requirements have been established according to a scale of significance which is briefly discussed. To adjust the book balance, physical inventories are periodically performed. The corresponding inventory procedures are outlined. The books used for nuclear materials accounting and the principles of the accounting system are summarized. (author) [French] La societe Eurochemic fait actuellement construire une usine de traitement chimique pres de Mol (Belgique). L'auteur indique succinctement les principales caracteristiques de l'usine et les differentes etapes du traitement. Pour assurer un controle correct des matieres nucleaires brutes et speciales, les installations d'Eurochemic sont divisees en secteurs de mesures. Tous les transferts entre ces secteurs de mesure sont determines quantitativement. Les mesures sont faites avec des degres de precision differents qui ont ete fixes en fonction de leur importance pour le bilan matieres general; les auteurs examinent brievement les criteres appliques a cette fin. Pour verifier le bilan, on procede periodiquement a des inventaires materiels. La facon dont sont menes ces inventaires est exposee dans ses grandes lignes. Les auteurs indiquent les livres utilises pour la comptabilite des matieres nucleaires et resument les principes du systeme comptable. (author) [Spanish] La compania Eurochemic esta construyendo una planta de regeneracion en Mol (Belgica). Los autores resumen las principales caracteristicas de la instalacion, y las distintas fases del proceso industrial. Para mantener un control

  13. Des racines et des ailes

    Directory of Open Access Journals (Sweden)

    Stéphanie Vincent-Geslin

    2012-05-01

    Full Text Available Les mobilités pendulaires semblent être en augmentation en Europe depuis une dizaine d’années. Cette croissance du temps passé à se déplacer amène à remettre en question la conjecture de Zahavi et apparaît relativement inexplicable en regard du paradigme classique de l’acteur rationnel traditionnellement utilisé dans le champ des transports. Si, dans la littérature, les temps de déplacements sont principalement expliqués par le contexte résidentiel, la forme urbaine et le travail, ce cadre explicatif ne dit rien des processus de décision eux-mêmes qui amènent aux pendularités intensives.À partir d’une enquête qualitative menée auprès de pendulaires français, suisses et belges, cette contribution propose d’analyser les arbitrages et les éléments déterminants des processus de la grande pendularité. Les mobilités quotidiennes pendulaires apparaissent comme le résultat de compromis entre activité professionnelle, attachement résidentiel et choix de vie et prennent ainsi la forme de stratégies de conciliation entre vie privée et vie professionnelle. Ces mobilités spatiales permettent alors paradoxalement la préservation des ancrages résidentiels, sociaux et familiaux.Roots and wings. Long-distance commuting patterns, or how to conciliate professional and personal lifeLong-distance commuting patterns appear to be increasing in Europe over the last ten years. These raising mobility patterns lead to reappraise the Zahavi conjecture and appear largely inexplicable by the classical rational actor paradigm traditionally used in transportation research. In literature, commuting is mainly explained by residential contexts, urban forms and job. Nevertheless this theoretical frame says little about the decision-making processes themselves. Based on a qualitative survey conducted in three European countries - France, Belgium and Switzerland – among a population of high commuters, this paper proposes an analysis of

  14. Regulation imposed to nuclear facility operators for the elaboration of 'waste studies' and 'waste statuses'; Reglementation imposee aux exploitants d'installations nucleaires pour l'elaboration ''des etudes dechets'' et ''des bilans dechets''

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-09-04

    This decision from the French authority of nuclear safety (ASN) aims at validating the new versions of the guidebook for the elaboration of 'waste studies' for nuclear facilities and of the specifications for the elaboration of 'waste statuses' for nuclear facilities. This paper includes two documents. The first one is a guidebook devoted to nuclear facility operators which fixes the rules of production of waste studies according to the articles 20 to 26 of the inter-ministry by-law from December 31, 1999 (waste zoning conditions and ASN's control modalities). The second document concerns the specifications for the establishment of annual waste statuses according to article 27 of the inter-ministry by-law from December 31, 1999 (rational management of nuclear wastes). (J.S.)

  15. Organisation of maintenance of health semi-portable detectors. IPAB-CFA-CABP control bench; Organisation de la maintenance des detecteurs semi-portatifs de sante. Banc de controle des IPAB-CFA-CABP

    Energy Technology Data Exchange (ETDEWEB)

    De Choudens, H.; Rage, P. [Commissariat a l' energie atomique et aux energies alternatives - CEA, Centre d' Etudes Nucleaires de Grenoble (France)

    1963-07-01

    As the number of electronic semi-portable health measurement devices is (was) increasing, it appears (appeared) important to organise their maintenance. In this report, the authors describe the implemented organisation. They indicate how a device is identified, which are the performed tests, and discuss results which have been obtained during the first year of implementation of this maintenance organisation. Then, they present the control bench, its operation (supply, measurement circuits), its use (control process for different devices, performed measurements and controls)

  16. DES Science Portal: II- Creating Science-Ready Catalogs

    Energy Technology Data Exchange (ETDEWEB)

    Fausti Neto, Angelo; et al.

    2017-08-18

    We present a novel approach for creating science-ready catalogs through a software infrastructure developed for the Dark Energy Survey (DES). We integrate the data products released by the DES Data Management and additional products created by the DES collaboration in an environment known as DES Science Portal. Each step involved in the creation of a science-ready catalog is recorded in a relational database and can be recovered at any time. We describe how the DES Science Portal automates the creation and characterization of lightweight catalogs for DES Year 1 Annual Release, and show its flexibility in creating multiple catalogs with different inputs and configurations. Finally, we discuss the advantages of this infrastructure for large surveys such as DES and the Large Synoptic Survey Telescope. The capability of creating science-ready catalogs efficiently and with full control of the inputs and configurations used is an important asset for supporting science analysis using data from large astronomical surveys.

  17. Medical-professional control of internal exposure to radionuclides in base nuclear installations. Extract from recommendations elaborated according to the methodological guide 'Recommendations for clinical practice' published by the Health High Authority in July 2011 - Occupational health references Nr 130

    International Nuclear Information System (INIS)

    Agrinier, Anne-Laure; Berard, Philippe; Piechowski, Jean; Blanchardon, Eric; Challeton de Vathaire, Cecile; Franck, Didier; Blanchin, Nicolas; Fottorino, Robert; Bourgaut, Laurent; Fritsch, Paul; Poncy, Jean-Luc; Gonin, Michele; Quesne, Benoit

    2012-06-01

    This sheet addresses the medical-professional control of the internal exposure to radionuclides in relationship with professional activity of workers exposed to this risk in base nuclear installations. It presents and discusses published recommendations which aimed at optimizing the prevention of the internal exposure risk and the medical follow-up of workers exposed to this risk. Different themes are addressed which concerns the implementation, communication, traceability and archiving, control programmes, the assessment of the efficient dose, the health risk and the taking on by labour medicine

  18. BROOKHAVEN: RHIC installation

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    This summer, the first superconducting magnet was installed in 3.8 kilometre tunnel for Brookhaven's RHIC heavy ion collider (October, page 31). Manufactured by Northrop Grumman's Electronics and System Integration Division, the magnet is the first of RHIC's 373 dipoles. In addition to the dipoles, Northrop Grumman will also provide 432 RHIC quadrupoles. The first quadrupole was delivered on 8 April, a month before the first dipole arrived for onsite testing prior to installation. RHIC will need 1,700 superconducting magnets - dipoles, quadrupoles, sextupoles and correcting magnets, 1,200 of which will be built by industry and the rest built at Brookhaven. The 300 sextupoles are being supplied by Everson Electric

  19. Entropy and Digital Installation

    Directory of Open Access Journals (Sweden)

    Susan Ballard

    2005-01-01

    Full Text Available This paper examines entropy as a process which introduces ideas of distributed materiality to digital installation. Beginning from an analysis of entropy as both force and probability measure within information theory and it’s extension in Ruldof Arnheim’s text ‘Entropy and Art” it develops an argument for the positive rather thannegative forces of entropy. The paper centres on a discussion of two recent works by New Zealand artists Ronnie van Hout (“On the Run”, Wellington City Gallery, NZ, 2004 and Alex Monteith (“Invisible Cities”, Physics Room Contemporary Art Space, Christchurch, NZ, 2004. Ballard suggests that entropy, rather than being a hindrance to understanding or a random chaotic force, discloses a necessary and material politics of noise present in digital installation.

  20. Installation Strategic Planning Guidebook

    Science.gov (United States)

    2012-05-01

    Installation natural resource concerns (for example, wetlands , number of endangered species, water use restrictions, encroachment on training lands...Koehler Publishing, 1994 7. Strategy Safari – A Guided Tour Through the Wilds of Strategic Management by Henry Mintzberg, Bruce Ahlstrand, and...T. (1987). NY: Knopf 36. Shaping Strategic Planning: Frogs, Dragons, Bees and Turkey Tails. Pfeiffer, J. W., Goodstein, L. D. & Nolan, T. M. (1989

  1. Installing the ALICE detector

    CERN Multimedia

    Maximilien Brice

    2006-01-01

    The huge iron yoke in the cavern at Point 2 in the LHC tunnel is prepared for the installation of the ALICE experiment. The yoke is being reused from the previous L3 experiment that was located at the same point during the LEP project from 1989 to 2000. ALICE will be inserted piece by piece into the cradle where it will be used to study collisions between two beams of lead ions.

  2. SNRIU nuclear installation modifications

    International Nuclear Information System (INIS)

    Goroshanskyi, Andrii

    2013-01-01

    Design stages of Nuclear Instalations (NI): NI design is performed in three stages: • Feasibility study: - Feasibility study is developed on the basis of the customer task for production facilities and linear facilities engineering and transport infrastructure that require detailed study of relevant decisions and identify options for and feasibility of construction. • Design: - The design is developed on the basis of design task, initial data and approved the previous stage under three-stage design. • Detailed documentation

  3. European aid control policy and environmental protection - an evaluation of the new Community guidelines; Die europaeische Beihilfenaufsicht im Umweltschutz - Darstellung und Kritik des neuen Gemeinschaftsrahmens

    Energy Technology Data Exchange (ETDEWEB)

    Ewringmann, D.; Thoene, M. [Koeln Univ. (Germany). Finanzwissenschaftliches Forschungsinstitut; Fischer, H.G.

    2002-01-01

    On 3 February 2001 the European Commission adopted the new Community guidelines on state aid for environmental protection. These guidelines outline the methods and criteria used by the Commission when controlling environmental state aid according to Art. 87 and 88 of the EC-Treaty. The study analyses the development of the new guidelines and their potential effects on environmental protection and environmental policy in the Member States of the European Union. In essence, the guidelines display three harmful tendencies: - they hamper progressive and innovative environmental policy that improves on 'least common denominator'-Community standards; - they do not respect the limits of the Commissions's authority, and interfere with the Member States' exclusive authority to decide on strategies and instruments of their respective environmental policies, and they especially affect Member States' choices between different energy sources and the general structure of its energy supply; - finally, they do not improve the protection of air competition on the common market. Based on these findings, the report delineates perspectives for an aid control policy that protects fair competition, and that gives incentives for voluntary national and regional environmental protection, allows for the equal treatment of clean techniques, and provides a consistent framework for exemptions from ecological taxes and environmental levies at the same time. (orig.) [German] Die Europaeische Kommission hat mit Wirkung vom 3. Februar 2001 einen neuen Gemeinschaftsrahmen fuer staatliche Umweltschutzbeihilfen erlassen. Dieser skizziert die Verfahren und Kriterien, welche die Kommission in ihrer Ueberpruefung staatlicher Umweltschutzbeihilfen auf Vereinbarkeit mit dem gemeinsamen Markt nach Art. 87 u. 88 EGV nutzen will. Die vorliegende Untersuchung schildert die Entstehung des Beihilferahmens und analysiert dessen potenzielle Wirkungen auf den Umweltschutz und die

  4. Safety of nuclear installations

    International Nuclear Information System (INIS)

    1991-01-01

    In accordance with the Nuclear Energy Act, a Licence may only be issued if the precautions required by the state of the art have been taken to prevent damage resulting from the construction and operation of the installation. The maximum admissible body doses in the area around the installation which must be observed in planning constructional and other technical protective measures to counter accidents in or at a nuclear power station (accident planning values, are established). According to the Radiological Protection Ordinance the Licensing Authority can consider these precautions to have been taken if, in designing the installation against accidents, the applicant has assumed the accidents which, according to the Safety Criteria and Guidelines for Nuclear Power Stations published in the Federal Register by the Federal Minister of the Interior after hearing the competent senior state authorities, must determine the design of a nuclear power station. On the basis of previous experience from safety analysis, assessment and operation of nuclear power stations, the accident guidelines published here define which accidents are determinative for the safety-related design of PWR power stations and what verification -particularly with regard to compliance with the accident planning values of the Radiological Protection Ordinance -must be provided by the applicant. (author)

  5. First ALICE detectors installed!

    CERN Multimedia

    2006-01-01

    Detectors to track down penetrating muon particles are the first to be placed in their final position in the ALICE cavern. The Alice muon spectrometer: in the foreground the trigger chamber is positioned in front of the muon wall, with the dipole magnet in the background. After the impressive transport of its dipole magnet, ALICE has begun to fill the spectrometer with detectors. In mid-July, the ALICE muon spectrometer team achieved important milestones with the installation of the trigger and the tracking chambers of the muon spectrometer. They are the first detectors to be installed in their final position in the cavern. All of the eight half planes of the RPCs (resistive plate chambers) have been installed in their final position behind the muon filter. The role of the trigger detector is to select events containing a muon pair coming, for instance, from the decay of J/ or Y resonances. The selection is made on the transverse momentum of the two individual muons. The internal parts of the RPCs, made o...

  6. Quality control of the treatment planning systems dose calculations in external radiation therapy using the Penelope Monte Carlo code; Controle qualite des systemes de planification dosimetrique des traitements en radiotherapie externe au moyen du code Monte-Carlo Penelope

    Energy Technology Data Exchange (ETDEWEB)

    Blazy-Aubignac, L

    2007-09-15

    The treatment planning systems (T.P.S.) occupy a key position in the radiotherapy service: they realize the projected calculation of the dose distribution and the treatment duration. Traditionally, the quality control of the calculated distribution doses relies on their comparisons with dose distributions measured under the device of treatment. This thesis proposes to substitute these dosimetry measures to the profile of reference dosimetry calculations got by the Penelope Monte-Carlo code. The Monte-Carlo simulations give a broad choice of test configurations and allow to envisage a quality control of dosimetry aspects of T.P.S. without monopolizing the treatment devices. This quality control, based on the Monte-Carlo simulations has been tested on a clinical T.P.S. and has allowed to simplify the quality procedures of the T.P.S.. This quality control, in depth, more precise and simpler to implement could be generalized to every center of radiotherapy. (N.C.)

  7. Samus Toroid Installation Fixture

    Energy Technology Data Exchange (ETDEWEB)

    Stredde, H.; /Fermilab

    1990-06-27

    The SAMUS (Small Angle Muon System) toroids have been designed and fabricated in the USSR and delivered to D0 ready for installation into the D0 detector. These toroids will be installed into the aperture of the EF's (End Toroids). The aperture in the EF's is 72-inch vertically and 66-inch horizontally. The Samus toroid is 70-inch vertically by 64-inch horizontally by 66-inch long and weighs approximately 38 tons. The Samus toroid has a 20-inch by 20-inch aperture in the center and it is through this aperture that the lift fixture must fit. The toroid must be 'threaded' through the EF aperture. Further, the Samus toroid coils are wound about the vertical portion of the aperture and thus limit the area where a lift fixture can make contact and not damage the coils. The fixture is designed to lift along a surface adjacent to the coils, but with clearance to the coil and with contact to the upper steel block of the toroid. The lift and installation will be done with the 50 ton crane at DO. The fixture was tested by lifting the Samus Toroid 2-inch off the floor and holding the weight for 10 minutes. Deflection was as predicted by the design calculations. Enclosed are sketches of the fixture and it relation to both Toroids (Samus and EF), along with hand calculations and an Finite Element Analysis. The PEA work was done by Kay Weber of the Accelerator Engineering Department.

  8. En eaux troubles : accentuation des pressions climatiques et ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    informatique font partie des nombreuses grandes sociétés qui se sont installées dans cette ville tentaculaire. Or, les 10 millions d'habitants de Bengaluru, la multitude d'industries concurrentes, de même que les exploitations ...

  9. Controlled storage for distributed power generation and optimised energy flow in low-voltage mains; Steuerbare Speicher zur Optimierung des Energieflusses in Niederspannungsnetzen mit DEA

    Energy Technology Data Exchange (ETDEWEB)

    Hoeckel, M.; Vollenwyder, R. [Berner Fachhochschule, Hochschule fuer Technik und Informatik (BFH-HTI), Biel (Switzerland); Buholzer, M.; Kreyenbuehl, U. [RIPEnergy AG, Zollikon (Switzerland); Schnyder, G.; Mauchle, P. [Schnyder Ingenieure AG, Huenenberg (Switzerland)

    2005-07-01

    This comprehensive final report for the Swiss Federal Office of Energy (SFOE) examines ways to optimise energy flows in mains networks that include distributed generation facilities. Increasing use of decentralised generation, its effects on the operation of low-voltage mains and the efficient use of the 400 V mains is discussed. The principles of operation and construction of controlled storage installations are discussed and concrete examples of their use in both grid-connected and island operation are quoted. Alternatives to storage are looked at from both the technical and economic points of view. The storage technologies used such as flywheels, supercaps, redox-flow batteries and lead-acid accumulators are briefly assessed and the results of simulations are discussed.

  10. Nuclear reactor installation

    International Nuclear Information System (INIS)

    Keller, W.

    1976-01-01

    A nuclear reactor installation includes a pressurized-water coolant reactor vessel and a concrete biological shield surrounding this vessel. The shield forms a space between it and the vessel large enough to permit rapid escape of the pressurized-water coolant therefrom in the event the vessel ruptures. Struts extend radially between the vessel and shield for a distance permitting normal radial thermal movement of the vessel, while containing the vessel in the event it ruptures, the struts being interspaced from each other to permit rapid escape of the pressurized-water coolant from the space between the shield and the vessel

  11. Decommissioning nuclear installations

    International Nuclear Information System (INIS)

    Dadoumont, J.

    2010-01-01

    When a nuclear installation is permanently shut down, it is crucial to completely dismantle and decontaminate it on account of radiological safety. The expertise that SCK-CEN has built up in the decommissioning operation of its own BR3 reactor is now available nationally and internationally. Last year SCK-CEN played an important role in the newly started dismantling and decontamination of the MOX plant (Mixed Oxide) of Belgonucleaire in Dessel, and the decommissioning of the university research reactor Thetis in Ghent.

  12. Fires of sodium installations

    International Nuclear Information System (INIS)

    Hajek, L.; Tlalka, R.

    1984-01-01

    A survey is presented of the literature dealing with fires of sodium installations between 1974 and 1981. Also described are three experimental fires of ca 50 kg of sodium in an open area, monitored by UJV Rez. The experimental conditions of the experiments are described and a phenomenological description is presented of the course of the fires. The experiments showed a relationship between wind velocity in the area surrounding the fire and surface temperature of the sodium flame. Systems analysis methods were applied to sodium area, spray and tube fires. (author)

  13. Worldwide installed geothermal power

    International Nuclear Information System (INIS)

    Laplaige, P.

    1995-01-01

    Worldwide electric energy production data are easy to compile, according to the informations given by individual countries. On the contrary, thermal applications of geothermics are difficult to quantify due to the variety of applications and the number of countries concerned. Exhaustive informations sometimes cannot be obtained from huge countries (China, Russia..) because of data centralization problems or not exploitable data transmission. Therefore, installed power data for geothermal heat production are given for 26 countries over the 57 that have answered the International Geothermal Association questionnaire. (J.S.). 1 fig., 2 tabs., 1 photo

  14. Wireless installation standard

    International Nuclear Information System (INIS)

    Lim, Hwang Bin

    2007-12-01

    This is divided six parts which are radio regulation law on securing of radio resource, use of radio resource, protection of radio resource, radio regulation enforcement ordinance with securing, distribution and assignment of radio regulation, radio regulation enforcement regulation on utility of radio resource and technical qualification examination, a wireless installation regulation of technique standard and safety facility standard, radio regulation such as certification regulation of information communicative machines and regulation of radio station on compliance of signal security, radio equipment in radio station, standard frequency station and emergency communication.

  15. Nuclear installations sites safety

    International Nuclear Information System (INIS)

    Barber, P.; Candes, P.; Duclos, P.; Doumenc, A.; Faure, J.; Hugon, J.; Mohammadioun, B.

    1988-11-01

    This report is divided into ten parts bearing: 1 Safety analysis procedures for Basis Nuclear Installations sites (BNI) in France 2 Site safety for BNI in France 3 Industrial and transport activities risks for BNI in France 4 Demographic characteristics near BNI sites in France 5 Meteorologic characteristics of BNI sites in France 6 Geological aspects near the BNI sites in France 7 Seismic studies for BNI sites in France 8 Hydrogeological aspects near BNI sites in France 9 Hydrological aspects near BNI sites in France 10 Ecological and radioecological studies of BNI sites in France [fr

  16. Continuous and discreet methods in the aggregation and des fuzzy stages of a diffuse controller of neutron power

    International Nuclear Information System (INIS)

    Najera H, M.C.; Benitez R, J.S.

    2003-01-01

    The results of a comparative study are presented of: to) A denominated diffuse controller 'exact', designed by means of an innovative method that determines analytically so much the group of exit resultant in the aggregation stage like the de fuzzy process, and b) a diffuse controller denominated 'discreet' based on the discretization of the variable of having left as much for the aggregation as for the de fuzzy. These stages incorporated to the control algorithms whose objective is the ascent and regulation of the neutron power, carrying out an analysis of its performance. (Author)

  17. Performance of buried pipe installation.

    Science.gov (United States)

    2010-05-01

    The purpose of this study is to determine the effects of geometric and mechanical parameters : characterizing the soil structure interaction developed in a buried pipe installation located under : roads/highways. The drainage pipes or culverts instal...

  18. Étude cytogenetique des aberrations chromosomiques chez des ...

    African Journals Online (AJOL)

    Ces techniciens et volontaires témoins ont été soumis à l'épreuve de prélèvement de 5 ml de sang veineux au pli du coude dans des tubes d'héparine sodique. Après 48 ... These technicians and Volunteers (controls) were subjected to the test sample of 5 ml of venous blood to the elbow crease in sodium heparin tubes.

  19. Aerodynamics of Power Plant Installation

    Science.gov (United States)

    1981-09-01

    th~orique d’environ 5 % pour Ia partie instationnaire, la pricision absolue globale risultante itant, bien entendu, mains bonne ;cette precision...motorisfie done lea souffleries do 1’ONERA au Centre de MODANE-AVREEUX. En coopgration avec l’ONERA deux mithodes do simulation froide des iota. des...validit6 permet un moills’ir contr~le du nivoau absolu des masures at de ce fait sat misux adapt6e h Is comparasion de dif’ferents motaurs. E~n outre

  20. CNGS Reflector installed

    CERN Multimedia

    2006-01-01

    A major component that will help target the CNGS neutrino beam for its 732km journey through the earth's crust, from CERN to the Gran Sasso laboratory in Italy, has been installed in its final position. The transport of the huge magnetic horn reflector through the CNGS access gallery. A team from CNGS and TS/IC, and the contractors DBS, transported the magnetic horn reflector on 5th December, in a carefully conducted operation that took just under two hours. The reflector is 7m long, 1.6m in diameter and 1.6 tonnes in weight. With only a matter of centimetres to spare on either side, the reflector was transported through the CNGS access gallery, before being installed in the experiment's target chamber. The larger of two magnetic horns, the reflector will help refocus sprays of high energy pions and kaons emitted after a 0.5MW stream of protons from the Super Proton Synchrotron (SPS) strikes nucleons in a graphite target. The horns are toroidal magnetic lenses and work with high pulsed currents: 150 kA f...

  1. Heating equipment installation system

    International Nuclear Information System (INIS)

    Meuschke, R.E.; Pomaibo, P.P.

    1991-01-01

    Disclosed is a method for installing a heater unit assembly in a reactor pressure vessel for performance of an annealing treatment on the vessel, the vessel having a vertical axis, being open at the top, being provided at the top with a flange having a horizontal surface, and being provided internally, at a location below the flange, with orientation elements which are asymmetrical with respect to the vertical axis, by the steps of: providing an orientation fixture having an upwardly extending guide member and orientation elements and installing the orientation fixture in the vessel so that the orientation elements of the orientation fixture mate with the orientation elements of the pressure vessel in order to establish a defined position of the orientation fixture in the pressure vessel, and so that the guide member projects above the pressure vessel flange; placing a seal ring in a defined position on the pressure vessel flange with the aid of the guide member; mounting at least one vertical, upwardly extending guide stud upon the seal ring; withdrawing the orientation fixture from the pressure vessel; and moving the heater unit assembly vertically downwardly into the pressure vessel while guiding the heater unit assembly along a path with the aid of the guide stud. 5 figures

  2. Intensity modulated radiation therapy: Analysis of patient specific quality control results, experience of Rene-Gauducheau Centre; Radiotherapie conformationnelle avec modulation d'intensite: analyse des resultats des controles precliniques, experience du centre Rene-Gauducheau

    Energy Technology Data Exchange (ETDEWEB)

    Chiavassa, S.; Brunet, G.; Gaudaire, S.; Munos-Llagostera, C.; Delpon, G.; Lisbona, A. [Service de physique medicale, centre Rene-Gauducheau, CLCC Nantes Atlantique, site hospitalier Nord, boulevard Jacques-Monod, 44805 Nantes Saint-Herblain cedex (France)

    2011-07-15

    Purpose. - Systematic verifications of patient's specific intensity-modulated radiation treatments are usually performed with absolute and relative measurements. The results constitute a database which allows the identification of potential systematic errors. Material and methods. - We analyzed 1270 beams distributed in 232 treatment plans. Step-and-shoot intensity-modulated radiation treatments were performed with a Clinac (6 and 23 MV) and sliding window intensity-modulated radiation treatments with a Novalis (6 MV). Results. - The distributions obtained do not show systematic error and all the control meet specified tolerances. Conclusion. - These results allow us to reduce controls specific patients for treatments performed under identical conditions (location, optimization and segmentation parameters of treatment planning system, etc.). (authors)

  3. CONTROLE DU RISQUE ET EXPERTISE : France : la précaution entre expertise et débat public Le cas des plantes transgéniques

    Directory of Open Access Journals (Sweden)

    Roy Alexis

    2000-07-01

    Full Text Available Depuis 1996, la commercialisation des premières plantes transgéniques s’est accompagnée d’un large débat en France (et en Europe. La controverse qui s’est ainsi développée a été le théâtre d’un processus d’appropriation par des acteurs hétérogènes de questions qui avaient été jusqu’alors essentiellement traitées par un cercle restreint d’intervenants réunis autour de quelques instances officielles de contrôle, dont principalement la Commission du génie biomoléculaire (CGB chargée de délivrer des avis auprès des instances exécutives concernant la dissémination dans l’environnement des organismes génétiquement modifiés (OGM. Une partie des critiques émises a porté sur les évaluations qui ont conduit à autoriser ces mises sur le marché ainsi que sur le fonctionnement de la CGB. Le gouvernement français a tenté de traduire cette demande d’ouverture du processus de décision à travers l’invocation du principe de précaution. L’extension de l’espace des débats a ainsi contribué à replacer la question des risques liés aux plantes transgéniques dans une réflexion élargie aux modèles de développement agricole et à l’alimentation. La rupture ainsi amorcée avec un modèle linéaire de la décision offre l’opportunité d’explorer le rôle qu’y remplissent les experts et les évolutions que pourrait impulser l’application du principe de précaution. En effet, de plus en plus présentée comme un nouveau paradigme en termes de politique environnementale et sanitaire, la précaution impliquerait une modification des liens unissant l’expertise scientifique et la décision. Fondant l’intervention publique sur la prise en compte des indéterminations, on peut toutefois se demander dans quelle mesure l’instrumentalisation de ce principe est limitée par une culture scientifique du risque encore dominée par une appropriation linéaire et déterministe de l’incertitude ? Si la

  4. Des Connaissances Aux Politiques

    International Development Research Centre (IDRC) Digital Library (Canada)

    Les synergies ont été mises en commun au fur et à mesure des progrès de la recherche. .... Recherche normative (sur le rôle et la performance des institutions .... Système national d'information sur la gestion environnementale connecté à 19 ...... Un fort contrôle centralisé sur l'élaboration des politiques nationales peut ...

  5. Operation safety of control systems. Principles and methods; Surete de fonctionnement des systemes de commande. Principes et methodes

    Energy Technology Data Exchange (ETDEWEB)

    Aubry, J.F. [Institut National Polytechnique, 54 - Nancy (France); Chatelet, E. [Universite de Technologie de Troyes, 10 (France)

    2008-09-15

    This article presents the main operation safety methods that can be implemented to design safe control systems taking into account the behaviour of the different components with each other (binary 'operation/failure' behaviours, non-consistent behaviours and 'hidden' failures, dynamical behaviours and temporal aspects etc). To take into account these different behaviours, advanced qualitative and quantitative methods have to be used which are described in this article: 1 - qualitative methods of analysis: functional analysis, preliminary risk analysis, failure mode and failure effects analyses; 2 - quantitative study of systems operation safety: binary representation models, state space-based methods, event space-based methods; 3 - application to the design of control systems: safe specifications of a control system, qualitative analysis of operation safety, quantitative analysis, example of application; 4 - conclusion. (J.S.)

  6. Contrôle des circuits auxiliaires des P.F.W. (arret machine 2004/2006, après rénovation de 25 aimants)

    CERN Document Server

    Ottaviani, J

    2006-01-01

    Les PFW sont des nappes polaires installées sur les pôles des aimants du PS. Elles sont au nombre de 4 par unité d'aimant et constituées d'un circuit principal (dans lequel circule le courant désiré selon le cycle magnétique utilisé) et de circuits auxiliaires. Les circuits auxiliaires sont des enroulements de correction (boucles de tour et ?pick-up? brasés sur les enroulements principaux). Pendant la variation du champ magnétique de l'aimant PS, on utilise des tensions induites dans ces circuits auxiliaires pour corriger les erreurs de champ dues aux pertes par courants de Foucault dans la chambre à vide. Chaque année, pendant l'arrêt machine, on vérifie si les caractéristiques des circuits auxiliaires correspondent aux normes (mesures des résistances des boucles de tours, résistances entre ?pick-up? et isolation des circuits) afin de faire un suivi. Des mesures ont été faites au début du grand arrêt en décembre 2004 afin de définir quels aimants seraient à rénover (l'état des PFW e...

  7. Évaluation des pratiques agricoles des légumes feuilles : le cas des ...

    African Journals Online (AJOL)

    SARAH

    30 sept. 2017 ... ... de Biochimie et Immunologie Appliquée, Centre de Recherche en Sciences Biologiques, Alimentaires et .... l'intoxication des agriculteurs et des consommateurs, ... source d'alimentation en eau et au pouvoir d'achat des.

  8. Nuclear Materials Management and its Relationship to Nuclear Safety and Criticality Control; La Gestion des Matieres Nucleaires et ses Rapports avec la Securite Nucleaire et le Controle de la Criticite; Obrashchenie s yadernymi materialami i ego svyaz' s yadernoj bezopasnost'yu i kontrolem nad kritichnost'yu; La Administracion de Materiales Nucleares y sus Relaciones con la Seguridad Nuclear y el Control de la Criticidad

    Energy Technology Data Exchange (ETDEWEB)

    Tingey, F. H. [Phillips Petroleum Company, Idaho Falls, ID (United States)

    1966-02-15

    ; elles dependent donc de ce service pour les renseignements precis dont elles ont besoin pour assumer leurs responsabilites. C'est en premier lieu a la personne chargee de la surveillance generale du circuit qu'il incombe de veiller a ce qu'en aucun point les matieres nucleaires ne puissent, par inadvertance, atteindre l'etat critique. Pour mettre au point des mesures preventives, il faut tenir compte d'au moins trois categories de problemes, a savoir: a) Les problemes scientifiques et techniques lies a l'evaluation des risques que presente une certaine quantite de matieres fissiles disposee selon une certaine geometrie dans un certain endroit; b) Les problemes materiels souleves par les restrictions qu'imposent les considerations scientifiques ou techniques; c) Les problemes purement administratifs a resoudre pour respecter les restrictions et les conditions particulieres imposees par les considerations techniques et materielles. Pour aider le responsable de la surveillance a s'acquitter de sa tache, certaines organisations prevoient des groupes ou des comites specialises dans des domaines particuliers. Les problemes techniques sont le plus souvent soumis a des specialistes de la criticite, generalement constitues en comites de securite nucleaire, qui connaissent bien les donnees experimentales des systemes critiques et peuvent, par le calcul, exploiter cette experience pour resoudre les problemes qui se posent. En ce qui concerne les problemes materiels, ils sont soumis a des groupes de techniciens que l'on met au courant des conditions particulieres qu'imposent les facteurs techniques et qui connaissent bien les limites de fonctionnement de l'installation. Quant aux problemes administratifs, le responsable de la surveillance se charge de les resoudre' en reglementant les activites en consequence. Le service de gestion des matieres nucleaires peut apporter une aide precieuse au responsable de la surveillance. C'est tout d'abord a ce service qu'il incombe d'alerter le

  9. Mexsyco project: representation of power plan control-instrumentation functions. Bibliographical analysis and conclusions; Projet Mexsyco: representation des fonctions de controle-commande des centrales. Analyse bibliographique et conclusions

    Energy Technology Data Exchange (ETDEWEB)

    Brunet, M

    1994-03-01

    The study covered in this paper is designed to review the current situation in terms of functional analysis, in order to find a functional analysis method for mechanical parts able to serve as a substrate for expressing operating safety constraints, time-related performance or any other tag of function description. This paper comprises three parts: The first is devoted to general notions of the formats used by the various functional analyses. It attempts to explain the three types of format: behavioural, structural and functional. It tackles the notions of trees and bottom-up and top-down approaches. It proposes examining the link between the expected functions of the systems and the hardware supporting these functions. It attempts to make a distinction between ``operators`` and ``operands`` enabling the notion of object to be linked to that of the three types of format seen above. It ends with a reminder of the distinction between semi-formal and formal. The second part analyses the current situation of functional analysis of the mechanical and control-instrumentation parts of power production plants, through a bibliographical search. The results of this second part are however disappointing. The purpose of the third part of the study is a prototype format built up from the considerations of the first two parts. This format meets our requirements better than those of the bibliographical analysis, but it could doubtless be improved: application of this format to RCV highlights its advantages, but also underlines the improvements needed. Given the deadlines of the Mexsyco project, the decision was taken to suspend development of this format for the time being and use a method currently being produced and based on use of the current functional breakdown (basic plant systems) and of a modular tree-structure representation of the control-instrumentation of a basic plant system. (author). 12 refs., 4 annexes.

  10. Ventilation control for an efficient heating of the interior of vehicles; Belueftungsregelung zur effizienten Aufheizung des Fahrzeuginnenraums

    Energy Technology Data Exchange (ETDEWEB)

    Markowitz, Markus [Ford-Werke GmbH, Koeln (Germany)

    2012-11-01

    Warming up the passenger compartment of a motor vehicle in winter, in the context of efficient engines and new powertrains with significantly reduced heat output, requires careful optimisation to facilitate the best usage of the remaining potentials. Part of this optimisation task is related to the ventilation controls, i.e. the airside warm-up strategy. Using recirculated air for cabin heating can increase the efficiency of the warm-up process. However, a moisture management has to be established in order to avoid window misting. For this reason, a humidity sensor is utilised. A few interesting aspects related to this approach shall be presented and discussed in this article: potential of heating performance improvement by using recirculated cabin air, effects on the cabin air distribution, limitations to the fraction of recirculated air, humidity assessment and control, verification of the improvement potential in the climatic windtunnel and on the road. (orig.)

  11. Control and treatment of sulfur oxides emissions; Prevention et traitement des emissions d`oxydes de soufre

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    The conference on the control and treatment of sulfur oxides emissions has held in Le Havre the 4. and 5. december, 1997. The aim of this conference was to promote the information on the different treatment technologies and to contribute on the one hand to the supporting and revival of the environmental protection and on the other hand to the desulfurization programs. It has allowed to recall too the technical and financial support of the Ademe to the manufacturers. (O.M.)

  12. Water pollution control. High performances finishing processing; Lutte contre la pollution des eaux. Finitions a haute performance

    Energy Technology Data Exchange (ETDEWEB)

    Gilles, P.

    1999-04-01

    The sewage recovery or recycling is an efficient way to control the water resources conservation. This paper characterizes in a first part the residual pollutants of an effluent rejected in the natural medium. It deals then the recycling and the water recovery objectives to present the possible processing. The author emphasizes some modern high performances engineering as, granular material filtration, membrane filtration, osmosis, UV disinfection, flocculation activated carbon or chemical oxidation. (A.L.B.)

  13. Possibilities for using a temperature-controlled pyrolysis method in order to determine the bonding form of mecury in soils and sediments; Moeglichkeiten der Anwendung eines temperaturgesteuerten Pyrolyseverfahrens zur Bestimmung der Bindungsform des Quecksilbers in Boeden und Sedimenten

    Energy Technology Data Exchange (ETDEWEB)

    Biester, H.

    1994-12-31

    The bonding behaviour of mercury in solids was investigated by means of a temperature-controlled pyrolysis method. Starting from the special property of elemental mercury to evaporate already at room temperature, a method was developed which permits to characterize different mercury bonding forms on the basis of Hg evaporation behaviour from solids at continuously increased temperature. The method starts from the assumption that it is possible to thermally reduce compounded mercury and release it in elemental form. The focus of the work was on the study of Hg bonding behaviour in soils and sediments. The soil samples used were from the areas of two mercury deposits, different kyanizing sites, some former mirror factories, and a chlor-alkali electrolysis workshop. The investigated sediments are a collection of mercury-polluted samples from the rivers Elbe, Rhine, Murg, the Rio Sao Joao de Meriti (Brazil) and some brooks and rivers of the Saar-Nahe depression. (orig./EF) [Deutsch] In der vorliegenden Arbeit wurde das Bindungsverhalten von Quecksilber in Feststoffen mittels eines temperaturgesteuerten Pyrolyseverfahrens untersucht. Ausgehend von der besonderen Eigenschaften des elementaren Quecksilbers, bereits bei Zimmertemperatur zu verdampfen, wurde ein Verfahren entwickelt, das eine Charakterisierung verschiedener Quecksilberbindungsformen aufgrund des Abdampfverhaltens des Hg aus dem Feststoff unter kontinuierlicher Temperaturerhoehung zulaesst. Dem Verfahren liegt dabei die Annahme zugrunde, dass sich das Quecksilber in seinen Verbindungen thermisch reduzieren und in elementarer Form freisetzen laesst. Durch den kontinuierlichen Aufheizprozess erfolgt die Freisetzung des Quecksilbers in Abhaengigkeit von der Bindungsstaerke in unterschiedlichen Temperaturbereichen. Die Darstellung der Ergebnisse erfolgte in Form von Abdampfkurven, die die Extinktion in Abhaengigkeit von der Temperatur darstellen. Der Schwerpunkt dieser Arbeit lag auf der Untersuchung des

  14. 40 CFR 1042.130 - Installation instructions for vessel manufacturers.

    Science.gov (United States)

    2010-07-01

    ...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE MARINE COMPRESSION-IGNITION ENGINES...-speed operation, tell vessel manufacturers not to install the engines in variable-speed applications or... vessel manufacturers. (a) If you sell an engine for someone else to install in a vessel, give the engine...

  15. Rare earths as burnable poison for extended cycles control in electricity generation reactors; Etude des terres rares en tant que poison consommable pour le controle des cycles allonges pour les reacteurs electrogenes

    Energy Technology Data Exchange (ETDEWEB)

    Asou, M

    1995-05-12

    The search of an optimization of the French electronuclear network operations leads to a necessary optimization of the core performances. All the economic studies performed by the utilities had shown that there is a real gain to minimize shut down periods for refueling. So, increasing the cycle length from 12 to 18 months will present a gain of shut down for a three years operation period. The theoretical burnable absorber will be a fuel admixed material bringing the required initial negative reactivity with a burn-up kinetic well suited to the fuel and allowing the lowest residual penalty as possible. The residual penalty us defined in this case by the non complete burn up of the poison, by the low of fissile material and by the accumulate of residual isotopes or nuclides. Because of the well known use of gadolinium as burnable absorber for BWR`s and PWR`s operations, the search for the best compromise to optimize all the above stress is pointed towards the rare earths. In the nuclides family, considering criteria such as cross sections, natural abundance and availability only five nuclides can play the role as burnable absorbers, namely: gadolinium, samarium, dysprosium, europium and erbium. The study presented here will show that only gadolinium and erbium will be considered to control the reactivity of the PWR`s. (author). 58 refs., 65 figs., 47 tabs.

  16. Multidimensional method for the determination of control power considering uncertainties; Multidimensionales Verfahren zur Bestimmung des Regelleistungsbedarfes unter Beruecksichtigung von Unsicherheiten

    Energy Technology Data Exchange (ETDEWEB)

    Kays, Jan; Schwippe, Johannes; Waniek, Daniel; Rehtanz, Christian [Technische Univ. Dortmund (Germany). Lehrstuhl fuer Energiesysteme und Energiewirtschaft

    2010-12-15

    One of the most crucial constraints in operation of electrical power supply systems is the permanent balance between generation and load. Reserve power is held ready to be able to keep this balance also in case of the occurrence of unpredictable events like power plant outages or inevitable deviations of power injections from their predicted values. At this, the allocation of operating reserves is in the field of conflict between level of reliability and cost effectiveness. The amount of reserve generation capacity required in a control area heavily depends on prediction quality which constitutes the need for high quality predictions. This article is about the influence of prediction quality on the amount of reserve generation capacity required in a control area. The algorithms for the assessment of required reserve generation capacity known from literature use the variation calculus technique to account for the aforementioned unpredictable events and prediction errors. In this article, an extension to a convolution-based method is presented in which the uncertainties of the predictions are expressed using intervals. Each parameter is represented by an independent dimension, assuming statistical independence among them. This allows the distinct analysis of each parameter's influence on the amount of required reserve generation capacity. In addition, two methods for the visualization of the multi-dimensional results are presented, allowing a comprehensive analysis of the parameters' influences. Standard distribution functions are used to represent the parameters for the simulation and the results are shown as probability density functions of possible imbalances. Based on forecasts of the development of conventional power plants and regenerative generation in the years 2020, 2030 and 2040, the required control power of the future German transmission system is calculated. Influences and dependencies are identified with the extended convolution-based method

  17. On Implementation of Dynamic Programming for Optimal Control Problems with Final State Constraints À propos de l’implémentation de la programmation dynamique pour des problèmes de contrôle optimal avec des contraintes sur l’état final

    Directory of Open Access Journals (Sweden)

    Sundström O.

    2009-09-01

    Full Text Available In this paper we present issues related to the implementation of dynamic programming for optimal control of a one-dimensional dynamic model, such as the hybrid electric vehicle energy management problem. A study on the resolution of the discretized state space emphasizes the need for careful implementation. A new method is presented to treat numerical issues appropriately. In particular, the method deals with numerical problems that arise due to high gradients in the optimal cost-to-go function. These gradients mainly occur on the border of the feasible state region. The proposed method not only enhances the accuracy of the final global optimum but also allows for a reduction of the state-space resolution with maintained accuracy. The latter substantially reduces the computational effort to calculate the global optimum. This allows for further applications of dynamic programming for hybrid electric vehicles such as extensive parameter studies. Cette publication présente certains problèmes concernant l’implémentation de la programmation dynamique pour le contrôle optimal d’un modèle dynamique scalaire, comme par exemple la gestion énergétique d’un véhicule hybride électrique. Une étude sur la résolution de l’espace d’état discrétisé souligne le besoin d’une implémentation minutieuse. Une nouvelle méthode qui permet de traiter des problèmes numériques d’une façon adéquate est présentée. Cette méthode permet particulièrement de résoudre des problèmes numériques engendrés par de forts gradients dans la fonction coût optimale. Ces gradients se situent surtout aux bornes de l’ensemble d’états atteignables. La méthode proposée améliore non seulement la précision de l’optimum global, mais permet aussi de réduire la résolution de l’espace d’état en conservant la précision. Le nombre de calculs nécessaire pour évaluer l’optimum global est ainsi considérablement réduit. Cela permet des

  18. J.O. no. 10 of the 13 january 2004, page 991, text no. 14. Decrees, orders. General texts. Decree no. 2004-47 of the 12 january 2004 modifying the decree no. 96-978 of the 31 october 1996 relative to the creation of the nuclear installation no. 162 named EL4-D, installation of storage for the Monts d'Arree power plants materials; J.O. no. 10 du 13 janvier 2004, page 991, texte no. 14. Decrets, arretes, circulaires. Textes generaux. Decret no. 2004-47 du 12 janvier 2004 modifiant le decret no. 96-978 du 31 octobre 1996 relatif a la creation de l'installation nucleaire de base no. 162 denommee EL4-D, installation d'entreposage de materiels de la centrale nucleaire des monts d'Arree

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-06-01

    The reactor EL4, implemented in december 1966, has definitely shutdown on the 31 july 1985. This reactor was an industrial prototype, built and exploited by Cea and EDF. In the framework of the partial dismantling of the installation, the decree 96-978 of the 31 october 1996 agreed the Cea to modify the installation to become a storage installation. (A.L.B.)

  19. Legal and Administrative Problems of Controlling the Disposal of Nuclear Wastes in the Sea; Problemes Juridiques et Administratifs Poses par le Controle de l'Elimination des Dechets Nucleaires dans la Mer; 041f 0420 041e 0414 ; Problemas Juridicos y Administrativos que Plantea el Control de la Evacuacion de Desechos Nucleares En El Mar

    Energy Technology Data Exchange (ETDEWEB)

    Hydeman, Lee M.; Berman, William H. [Atomic Energy Research Project, University of Michigan Law School (United States)

    1960-07-01

    The basic purpose of the paper is to present some approaches to multinational control of the sea disposal of nuclear wastes, considering both the type of international .control which may be appropriate and the means for accomplishing such control. First, the authors give a brief description of the kind of control which appears to be necessary in protecting public health against the hazards of the disposal of wastes in the sea. The second part consists of a general analysis of the legal problems posed by nuclear wastes. Emphasis is placed on the authority of coastal states to impose unilateral control on the disposal of wastes by other nations if such disposal might adversely affect their interests. The authors inquire into the adequacy of legal remedies as well as the possible rule of law regarding the prevention of damage from waste disposal and the apportionment of liability in the event that such damage does occur. The third part is an analysis of how other problems of control have been handled, both unilaterally and multilaterally. The final part consists of an inquiry into various means of internationally controlling the sea disposal of nuclear wastes. The role of existing international bodies in the maintenance of continuing administrative control at the international level is mentioned. (author) [French] Le but essentiel du memoire est d'exposer diverses facons d'envisager le probleme du controle multinational de l'evacuation des dechets nucleaires dans l'eau de mer, en examinant a la fois le type de controle international approprie et les moyens de le mettre en oeuvre. La premiere partie contiendra une description succincte du genre de controle qui semble necessaire pour la protection de la sante publique contre les effets de l'evacuation des dechets dans la mer. La deuxieme partie consistera en une analyse generale des problemes juridiques poses par. l'elimination des dechets nucleaires. Les auteurs traiteront particulierement du droit des Etats riverains

  20. Model of purchase contract of the electric power produced by installations which eliminate the crude or transformed animal wastes, and subjected to the electric power purchase obligation. Established in the application of the article 5 from the decree of the 10 may 2001 and approved by the ministry charged with the electric power; Modele de contrat d'achat de l'energie electrique produite par les installations qui eliminent des dechets animaux bruts ou transformes, et beneficiant l'obligation d'achat d'electricite. Etablie en application de l'article 5 du decret du 10 mai 2001 et approuve par le Ministre charge de l'electricite

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    The text of the contract is provided presenting the general conditions and specific conditions adapted to the installation characteristics of the electric power producer: contract object, connecting to the public network, producer installation, reciprocal agreements, measure and control of the energy and power, tariffs periods, price of the bought energy, taxes, payments, contract management, validity, suspension modification or avoidance of the contract. (A.L.B.)

  1. Model of purchase contract of the electric power produced by installations using the hydraulic energy of lakes, rivers and seas and subjected to the electric power purchase obligation. Established in the application of the article 5 from the decree of the 10 may 2001 and approved by the ministry charged with the electric power; Modele de contrat d'achat de l'energie electrique produite par les installations utilisant l'energie hydraulique des lacs, cours d'eau et mers et beneficiant l'obligation d'achat d'electricite. Etablie en application de l'article 5 du decret du 10 mai 2001 et approuve par le Ministre charge de l'electricite

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    The text of the contract is provided presenting the general conditions and specific conditions adapted to the installation characteristics of the electric power producer: contract object, connecting to the public network, producer installation, reciprocal agreements, measure and control of the energy and power, tariffs periods, price of the bought energy, taxes, payments, contract management, validity, suspension modification or avoidance of the contract. (A.L.B.)

  2. Geodetic alignment of laser power installations

    International Nuclear Information System (INIS)

    Shtorm, V.V.; Gostev, A.M.; Drobikov, A.V.

    1989-01-01

    Main problems occuring in applied geodesy under initial alignment of laser power installation optical channel are considered. Attention is paid to alignment of lens beamguide telescopic pairs and alignment quality control. Methods and means of geodetic measurements under alignment are indicated. Conclusions are made about the degree of working through certain aspects of the problem

  3. Installation of foundation fieldbus to KUR

    International Nuclear Information System (INIS)

    Ishihara, Shinji; Fujita, Yoshiaki

    1999-11-01

    The instrumentation and control system for the research reactor in Research Reactor Institute, Kyoto University has been used for the safe and steady operation since the initial critical attainment in 1964. It has been modified and added many devices in the chance of increasing the reactor power from 1 MW to 5 MW, installing new experimental facilities or fitting to modified nuclear regulations. In order to avoid the unscheduled shutdown of the research reactor by cause the failure of the devices, most of instrumentation system was renewed in 1999. Operating the research reactor more safely and reliably, Supervisory Control Automation and Data Acquisition System which employed personal computers with the Windows NT operating system was added to the conventional instrumentation system, and the fieldbus system called Foundation Fieldbus was installed. Compared with conventional instrumentation system, each fieldbus system has some advantages. Many kinds of fieldbus systems have been developed and sold on the markets in some countries. Foundation Fieldbus standardizing international, which was able to use the devices made by multi-vendor was tentatively installed to study particular techniques about Foundation Fieldbus. The primary coolant flow rate, the temperature difference between the reactor tank inlet and outlet temperatures, the calorimetric power and the reactor power in nuclear instrumentation are monitored on human-machine interface devices on the fieldbus. The programmable logic controller is employed to control the information system for the reactor. This paper introduces Foundation Fieldbus installed. (author)

  4. Gestion des risques

    CERN Document Server

    Louisot, Jean-Paul

    2009-01-01

    Depuis le début du lie siècle, la gestion des risques connaît une véritable révolution culturelle. Jusqu'alors fonction technique, centrée autour de l'achat de couverture d'assurances, elle est devenue une discipline managériale et transversale : une valise d'instruments que chaque manager doit connaître et appliquer quels que soient son domaine de compétence et ses missions au sein de l'organisation. En effet, la gestion des risques est une culture qui doit être assimilée par chacun des acteurs. C'est précisément l'ambition des 101 questions rassemblées dans cet ouvrage : apporter à chaque manager d'entreprise, de collectivité, d'établissement de santé..., des réponses claires au " pourquoi " et au " comment " : Comment identifier les risques ? Comment analyser les risques ? Quels sont les objectifs de la gestion des risques ? Une carte des risques pour quoi faire ? Pourquoi faut-il financer les risques ? Les entreprises ont-elles des responsabilités pénales ? En quoi consiste la gestion...

  5. La gouvernance des risques naturels et la problematique des ...

    African Journals Online (AJOL)

    Depuis quelques années, la gouvernance des risques naturels dus aux inondations remet en cause les processus de mise en oeuvre des politiques urbaines et la qualité de la structure des aménagements dans les grandes villes du Golfe de Guinée. La perception de la gouvernance et l'application des politiques de ...

  6. Study of filterable materials and protection instruments by the use of radioactive aerosols; Etude de materiaux filtrants et d'appareils de protection a l'aide des aerosols radioactifs

    Energy Technology Data Exchange (ETDEWEB)

    Billard,; Chevalier,; Pradel, [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    Many filtration problems can be studied by means of radioactive aerosols. For the investigations described in this paper we have chosen the solid disintegration products of radon, the radioactive gas formed from radium, because of the facilities of generation and measurement it offers. Radon and its daughters are in fact always present in the atmosphere in sufficient concentration for certain tests. In order to improve the sensitivity of the measurements, radon from uranium ore can be used. The technique of measuring by counting {alpha} particles is rapid and easy to employ. We have thus been able to define a test for filterable substances, and to check filtering installation and individual protection instruments. (author) [French] Les aerosols radioactifs permettent d'etudier de nombreux problemes de filtration. Pour les etudes decrites dans ce document, nous avons choisi les produits solides de desintegration du radon, gaz radioactif forme a partir du radium en raison des facilites de generation et de mesure. Le radon et ses descendants sont, en effet, toujours presents dans l'atmosphere en concentration suffisante pour certains essais. Pour ameliorer la sensibilite des mesures, il suffit d'utiliser le radon provenant de minerai d'uranium. La technique de mesure par comptage des particules {alpha} est rapide et facile a mettre en oeuvre. Nous avons pu ainsi definir un test pour les substances filtrantes et controler les installations de filtration et des appareils de protection individuelle. (auteur)

  7. Tolley's industrial and commercial gas installation practice

    CERN Document Server

    Hazlehurst, John

    2010-01-01

    This is the third of three essential reference volumes for those concerned with the installation and servicing of domestic and industrial gas equipment. This volume explains the basic principles underlying the practical and theoretical aspects of installing and servicing gas appliances and associated equipment, from the basics of combustion, to burners, pressure and flow, transfer of heat, controls, as well as materials and processes, electrical aspects, and metering and measuring devices. Covering both Natural Gas and Liquefied Petroleum Gas, the many illustrations and worked examples include

  8. Natural gas fuelling stations installation code

    Energy Technology Data Exchange (ETDEWEB)

    Barrigar, C; Burford, G; Adragna, M; Hawryn, S

    2004-07-01

    This Canadian Standard applies to natural gas fuelling stations that can be used for fleet and public dispensing operations. This document is divided into 11 sections that address the scope of the Standard; definitions and reference publications; general requirements; compressors; storage; dispensing; flow control devices; storage vessel dispatch and receiving; design, installation and testing of piping, tubing and fittings; and installation of vehicle refuelling appliances (VRAs) connected to storage piping. The most recent revision to the Standard includes requirements for indoor fuelling of natural gas vehicles. This Standard, like all Canadian Standards, was subject to periodic review and was most recently reaffirmed in 2004. tabs., figs.

  9. Nuclear reactor installation

    International Nuclear Information System (INIS)

    Jungmann, A.

    1976-01-01

    A nuclear reactor metal pressure vessel is surrounded by a concrete wall forming an annular space around the vessel. Thermal insulation is in this space and surrounds the vessel, and a coolant-conductive layer is also in this space surrounding the thermal insulation, coolant forced through this layer reducing the thermal stress on the concrete wall. The coolant-conductive layer is formed by concrete blocks laid together and having coolant passages, these blocks being small enough individually to permit them to be cast from concrete at the reactor installation, the thermal insulation being formed by much larger sheet-metal clad concrete segments. Mortar is injected between the interfaces of the coolant-conductive layer and concrete wall and the interfaces between the fluid-conductive layer and the insulation, a layer of slippery sheet material being interposed between the insulation and the mortar. When the pressure vessel is thermally expanded by reactor operation, the annular space between it and the concrete wall is completely filled by these components so that zero-excursion rupture safeguard is provided for the vessel. 4 claims, 1 figure

  10. ROS Installation and Commissioning

    CERN Multimedia

    Gorini, B

    The ATLAS Readout group (a sub-group of TDAQ) has now completed the installation and commissioning of all of the Readout System (ROS) units. Event data from ATLAS is initially handled by detector specific hardware and software, but following a Level 1 Accept the data passes from the detector specific Readout Drivers (RODs) to the ROS, the first stage of the central ATLAS DAQ. Within the final ATLAS TDAQ system the ROS stores the data and on request makes it available to the Level 2 Trigger (L2) processors and to the Event Builder (EB) as required. The ROS is implemented as a large number of PCs housing custom built cards (ROBINs) and running custom multi-threaded software. Each ROBIN card (shown below) contains buffer memories to store the data, plus a field programmable gate array ( FPGA ) and an embedded PowerPC processor for management of the memories and data requests, and is implemented as a 64-bit 66 MHz PCI card. Both the software and the ROBIN cards have been designed and developed by the Readout g...

  11. Part 1: The detection of criticality accidents in the Commissariat a l'Energie Atomique. Part 2: The Burst Slug Detection; 1. partie: la detection des accidents de criticite au Commissariat a l'Energie Atomique. 2. partie.: la detection des ruptures de gaines

    Energy Technology Data Exchange (ETDEWEB)

    Debrie, G; Lavie, J; Planque, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    of the plant. The techniques developed during this programme can be subsequently adapted to easily solve problems of detection in other types of reactor. The main characteristics of the evolution of the various installations constructed or under construction is reflected in the continuous progress towards greater automation and the use of detectors working under higher and higher temperatures and pressures. Succeeding to the reactor G3 whose BSD installation was already highly automatic, the EDF reactors at Chinon use digital computers especially meant for BSD data processing. In the planned reactor EL 4, the BSD measurements will be processed with all the other control measurements in a centralized computer unit. The progressive pressure increase of the cooling gas (15 bars in G3, 25 bars in the Chinon reactors, 60 bars in EL 4) has required the development of electric precipitations able to separate and measure the fission products in the carbonic gas at temperatures reaching 300 C and under pressures as high as 60 bars. In spite of the severe conditions of utilisation, the various devices developed offer all the guarantees of safety and long life expectancy required for their use on BSD installations. (authors) [French] Dans toute installation ou est manipulee de la matiere fissile en quantite potentiellement superieure a la masse critique, existe, quelles que soient les precautions prises, un risque permanent d'excursion nucleaire accidentelle, pouvant entrainer une irradiation grave du personnel. La detection immediate suivie d'une evacuation rapide limite considerablement les risques d'irradiation dus aux produits de fission ou a la reaction nucleaire elle-meme si elle se poursuit. Les phenomenes physiques qui accompagnent une excursion nucleaire, demeurant insuffisants pour suivre l'alarme et pouvant preter a confusion, la necessite d'un appareillage approprie de la detection des accidents de criticite s'impose donc. Compte-tenu des caracteristiques des

  12. Guide relative to the modalities of statements and to the codification of criteria relative to the significant events involving the safety, the radiation protection or the environment applicable to the base nuclear installations and to the transport of radioactive matters; Guide relatif aux modalites de declaration et a la codification des criteres relatifs aux evenements significatifs impliquant la surete, la radioprotection ou l'environnement applicable aux installations nucleaires de base et au transport de matieres radioactives

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    It is necessary to analyze the events detected on an installation in order to be sure that an already occurred event does not be repeated, by taking into account the appropriate remedial measures, to avoid a worsen situation could occur by analyzing the potential consequences of precursory events of more serious ones, to promote the correct practices to improve the safety. The present guide has for vocation to define the arrangements enforceable to nuclear operators about the statements modalities of such events when these ones concern the safety of nuclear facilities, transport of radioactive matters, radiation protection or environmental protection. In any case it can substitute to the specific obligations coming from the work code, public health code and environment code, licensing decrees about releases. (N.C.)

  13. New fast reactor installation concept

    International Nuclear Information System (INIS)

    Anon.

    1976-01-01

    The large size and complexity of fast reactor installations are emphasised and these difficulties will be increased with the advent of fast reactors of higher power. In this connection a new concept of fast reactor installation is described with a view to reducing the size of the installation and enabling most components, including even the primary vessel, to be constructed within the confines of a workshop. Full constructional details are given. (U.K.)

  14. Installing Python Modules with pip

    OpenAIRE

    Fred Gibbs

    2013-01-01

    This lesson shows you how to download and install Python modules. There are many ways to install external modules, but for the purposes of this lesson, we’re going to use a program called pip. As of Python 2.7.9 and newer, pip is installed by default. This tutorial will be helpful for anyone using older versions of Python (which are still quite common).

  15. Installation of a bitumen coating plant for high-activity concentrates; Installation pilote d'enrobage par le bitume de concentrats de haute activite

    Energy Technology Data Exchange (ETDEWEB)

    Rodier, J; Lefillatre, G; Seyfried, P [Commissariat a l' Energie Atomique, Chusclan (France). Centre de Production de Plutonium de Marcoule

    1969-07-01

    Following the excellent results obtained on the industrial coating of radioactive sludges, the possibility of solidifying also the evaporation concentrates with bitumen has been considered. For high activity concentrates, the use of bitumen is however limited by two main parameters: temperature resistance, irradiation resistance. By making use of the characteristics of a blown bitumen, it has been possible to design a high activity coating pilot plant treating concentrations of several tens of curies per litre. This plant will make use of a screw-type extrusion machine capable of coating treated concentrates at a rate of 20 l/hr. Before being coated, the concentrates will be subjected to a coprecipitation treatment designed to make the radioelements insoluble. This installation will make possible, apart from technological studies, laboratory experiments on the coated material (measurements on self-heating, on electrical charges, on radiolytic gases, and also lixiviation tests. It is at present believed, on the basis of available data, that it is possible to coat concentrates having an activity of 20 Ci/l at a price of 1840 F per cubic metre. (authors) [French] A la suite des excellents resultats obtenus pour l'enrobage industriel des boues radioactives, il a ete envisage de solidifier egalement les concentrats d'evaporation par le bitume. Pour les concentrats de haute activite, l'emploi du bitume est cependant limite par deux parametres essentiels: tenue a la temperature, tenue a l'irradiation. Grace aux caracteristiques d'un bitume souffle, il a ete possible de concevoir une installation pilote d'enrobage haute activite contenant plusieurs dizaines de curies par litre. Cette installation utilisera une machine du type extrudeuse a vis qui peut enrober 20 l/h de concentrats traites. Avant leur enrobage, les concentrats subiront un traitement de coprecipitation destine a insolubiliser les radioelements. En dehors des etudes technologiques, cette installation

  16. Criteria for Special Nuclear Materials Inventory and Control Procedures; Criteres a Suivre Pour Proceder a l'Inventaire des Matieres Nucleaires Speciales et aux Mesures de Controle; Kriterii dlya inventarizatsii spetsial'nykh yadernykh materialov i metody ucheta; Criterios a Que Deben Ajustarse los Procedimientos de Inventario y Control de los Materiales Nucleares Especiales

    Energy Technology Data Exchange (ETDEWEB)

    Kinderman, E. M.; Tarrice, R. R. [Stanford Research Institute, Menlo Park, CA (United States)

    1966-02-15

    and the total inventory of these special nuclear materials. A matrix of solutions to the management and inventory control of special nuclear materials will be presented. The multiplicity and relative effectiveness of varied techniques at key stages of the materials supply, utilization and recovery are assessed. (author) [French] L'un des plus importants problemes qui, dans le domaine nucleaire et notamment dans l'exploitation commerciale de l'energie d'origine nucleaire, se posera aux societes d'investissement, aux directeursetaux exploitants est celui du controle efficace de l'inventaire des matieres nucleaires dont la valeur depassera, d'ici 1980, 5 milliards de dollars des Etats-Unis. Comparativement a la plupart des matieres utilisees commercialement, les matieres nucleaires speciales sont couteuses; aux Etats-Unis par exemple, l'uranium enrichi a 90%, l'uranium enrichi a 3% sous forme d'hexa- fluorure et l'eau lourde coutent respectivement 10808 dollars, 254 dollars et 61,60 dollars le kilo. En outre, ces matieres sont frequemment soumises, pour des raisons de protection sanitaire et de securite, a des controles gouvernementaux speciaux sans rapport direct avec leur valeur monetaire. En depit de leur prix eleve, ces matieres sont destinees a etre utilisees en grandes quantites; par exemple, on utilisera de 50 a 75 t de combustible enrichi a 3{sup o}{r_brace}o dans un reacteur de 500 MW modere a l'eau ordinaire et 200 a 300 reacteurs de cette puissance fonctionneront vraisemblablement dans le monde en 1980. L'experience acquise a permis la mise au point et l'application de methodes speciales pour le controle commercial de grandes quantites de matieres de faible valeur comme le charbon ou le minerai de fer ou de petites quantites de matieres de grande valeur comme les metaux precieux. Tout en ayant des prix comparables a ces derniers, les matieres nucleaires speciales sont de nature differente et seront utilisees en quantites beaucoup plus importantes que les

  17. Childhood cancer and nuclear installations: a review

    International Nuclear Information System (INIS)

    Muirhead, C.R.

    1998-01-01

    Many epidemiological studies of childhood cancer around nuclear installations have been conducted in recent years. This article reviews results from Great Britain and elsewhere. Geographical studies have indicated raised risks of childhood leukaemia around some British nuclear installations. However, environmental assessments suggest that the findings are unlikely to be due to radioactive releases from the sites. Case-control studies have allowed more detailed investigation of putative risk factors than is possible from geographical studies. In particular, a recent national study in Britain does not support the hypothesis raised by an earlier study in West Cumbria that paternal radiation exposure prior to conception may increase the risk of leukaemia and non-Hodgkin's lymphoma in offspring. Other studies suggest that childhood leukaemia may have an infective basis, although there is still uncertainty about whether this would explain the findings around nuclear installations. The UK Childhood Cancer Study may provide more information on the causes of these diseases. (author)

  18. Couches minces electrochromiques d'oxyde de tungstene dense et poreux pour des applications de controle energetique

    Science.gov (United States)

    Camirand, Hubert

    Nanotechnology has modified the landscape of energy generation, energy storage and energy saving devices. Architectural fenestration can extensively benefit from green nanotechnologies. Amongst them, active fenestration or "smart" windows are able to modify their coloration state upon the application of a small electrical voltage, when based on electrochromic materials. In fact, the amount of visible and near-infrared light that can penetrate through the window can be altered. Therefore, their implementation can allow for a significant reduction in energy consumption in buildings. Furthermore, the capability of optimizing indoor comfort is user-controlled, thus an additional degree of freedom is given by electrochromic-based technology. It is worth mentioning that such devices can be largely advantageous in countries with variable seasons, such as here in Canada. As a matter of fact, the large temperature difference between the hot and cold season influences the requirement of impeding or enabling visible and thermal radiation to pass through. This master's thesis is entirely devoted to tungsten trioxide (WO 3), which is the most widely studied electrochromic material. In the present case, WO3 thin films are synthesized by radiofrequency magnetron sputtering. By varying the deposition pressure and power, the porosity content/packing density of the films is modified. This work's main topic is the characterization of electrochromic samples by in situ spectroscopic ellipsometry simultaneously with the application of an electrical voltage in an aqueous electrolytic medium made of sulfuric acid (H2SO 4). The methodology developed here allows for an in-depth study of electro-active materials. To corroborate this, optical properties of WO3 are obtained for a wide range of coloration levels, and these are subsequently used to model the resulting coloration of electrochromic multilayer systems. However, the interface between the dense and porous films affects the coloration

  19. Nuclear exports. Parliamentary control and confidentiality; Parlamentarische Kontrolle und Geheimhaltungsbeduerftigkeit bei Nuklearexporten. Zum Urteil des Bundesverfassungsgerichts vom 21. Oktober 2014

    Energy Technology Data Exchange (ETDEWEB)

    Feldmann, Ulrike

    2015-03-15

    With its decision taken on 21. October 2014 (Az.: 2 BvE 5/11) the Federal Constitutional Court (BVerfG) decided during court proceedings between administrative bodies on the scope and limits of the parliamentary right of information. Even though the proceeding did not deal with nuclear exports but arm exports, foreign trade law, however, does not only designate an export licence obligation for military weapons but also for so called dual-use goods meaning goods, which can be used both for friendly as well as for military purposes. The export of these goods requires according to the so-called Dual-Use Regulation (EG) 428/2009 a licence. Annex I category 0 of the regulation (EG) 428/2009 lists a variety of nuclear materials, plants and equipment items for which this licence applies. In the same manner as arm exports, also exports of nuclear dual-use goods are being discussed in a special cabinet committee, the Federal Security Council (BSR), which shall coordinate cross-departmentally the German security and defence policy under consideration of economic interests and which categorises its results, according to the rules of procedure, as confidential. Also legally not regulated but common ''preliminary enquiries'' at the responsible Federal Ministry or rather Federal Office of Economics and Export Control by companies which plan an export and want to affirm the general approval for their export business prior to conclusion of contract take not only place for arm exports but also for nuclear dual-use goods. The decision by the Federal Constitutional Court can be applied to consultations about the authorisation of nuclear dual-use goods.

  20. Leakproof control of technological installations and underground pipelines using radioactive tracers as a contribution to the protection of the natural environment

    International Nuclear Information System (INIS)

    Kras, J.; Walis, L.; Myczkowski, S.; Panczyk, E.

    2004-01-01

    The radioisotope method of leakproof control and leak localization has the following advantages: simplicity, short time of duration of experiment, low cost, short time need for adaptation of the object for the control, high sensitivity of measurements. Owing the application of the isotope technique is possible to carry out the expertise at low pressure, which permits to avoid strength effort of the construction materials. Through the radioisotope method is not a strength test it is complementary to pressure test (hydraulic or pneumatic). It should be noted that the hydraulic test cannot be applied to some technological objects despite the need of their leakproof control. The presentation deals with principles of application of the radioactive tracer - methyl bromide with Br-82, its preparation and ways of injecting the tracer and carrying out radiometric measurements in dependence on the kind of the object examined. The radioisotope tracer method for leakproof control of technological objects and underground pipelines as well as the apparatus used for this control have been developed in the Institute of Nuclear Chemistry and Technology and have been routinely used. (author)

  1. Use of the Neutron Die-Away Technique to Test Control Rod Effectiveness Theories; Emploi de la Methode d'Absorption des Neutrons pour Verifier les Theories sur l'Efficacite des Barres de Commande; Ispol'zovanie metoda spada potoka nejtronov dlya proverki teorij ehffektivnosti reguliruyushchikh sterzhnej; Aplicacion de la Tecnica de Extincion Neutronica a la Verificacion de las Teorias sobre la Eficacia de las Barras de Control

    Energy Technology Data Exchange (ETDEWEB)

    Perez, R. B. [University of Florida, Gainesville, FL (United States); De Saussure, G.; Silver, E. G. [University of Florida, Gainesville, FL (United States); Oak Ridge National Laboratory, Oak Ridge, TN (United States)

    1964-04-15

    . Les theories, qui ont ete verifiees sont celles de: 1. Nordheim-Scalettar, 2. Hurwitz-Roe, 3. et celle du code de diffusion numerique. Les auteurs ont calcule l'effet des barres cruciformes a l'aide de la methode de transformation conforme de Hurwitz-Roe et ont trouve pour le laplacien la valeur de 0,0188 cm{sup -2} qui est voisine du resultat de l'experience, 0,0187 {+-} 0,0006 cm-2. Pour les barres epaisses, les previsions de la theorie de Nordheim-Scallettar et de la theorie du code de diffusion depassent les resultats experimentaux d'environ lOyeo. Les deux methodes ont toutefois etabli des previsions correctes en ce qui concerne l'interaction entre les barres epaisses. Pour les barres minces, la methode Nordheim-Scalettar est extremement precise. On peut s'attendre a trouver l'ecart constate pour les barres epaisses, lorsqu'on utilise la theorie de diffusion pour calculer l'effet des barres ayant une section de dimensions comparables a celle du libre parcours moyen des neutrons dans le ralentisseur. On procede actuellement a des mesures avec des banes de dimensions intermediaires pour determiner le point a partir duquel la theorie de la diffusion n'est plus valable. (author) [Spanish] El calculo de la eficacia de las barras de control se complica por el hecho de que esta depende a la vez de la distribucion de las energias neutronicas y de la geometria del conjunto. Cuando se trata de comparar los datos teoricos con los resultados experimentales obtenidos en otros reactores o en sistemas subcriticos, surgen dificultades derivadas de la complejidad intrinseca de tales sistemas. La tecnica de la extincion neutronica brinda la posibilidad de establecer un modelo neutronico integramente termico, en el cual el efecto de la distribucion de energias neutronicas se puede separar de los efectos espaciales. Por lo tanto, es dable estudiar el factor geometrico de la eficacia de las barras de control sin reparar en las caracteristicas del espectro neutronico y luego es

  2. Analytical chemistry equipment for radioactive products; Installation de chimie analytique pour produits radioactifs

    Energy Technology Data Exchange (ETDEWEB)

    Douis, M; Guillon, A; Laurent, H; Sauvagnac, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1959-07-01

    The report deals with a shielded enclosure, hermetic, for analytical examination and handling of radioactive products. Remote handling for the following is provided: pipette absorption - weighing - centrifuging - desiccation - volumetric - pH measurement - potentiometric - colorimetric - polarographic. The above list is not restrictive: the enclosure is designed for the rapid installation of other equipment. Powerfully ventilated and screened to 400 m-curies long life fission product levels by 5 cm of lead, the enclosure is fully safe to the stated level. (author) [French] La presente communication decrit une enceinte etanche et blindee permettant un travail et un controle analytique sur des produits radioactifs. Les techniques suivantes sont adaptees pour une manipulation a distance: pipettage, pesees, centrifugation, dessiccation, volumetrie, mesure de pH, potentiometrie, colorimetrie, polarographie. Cette liste n'est pas limitative. La conception de l'installation permet la mise en place rapide d'autres appareils. Protegee par 5 cm de plomb et fortement ventilee, elle donne toute securite de manipulation jusqu'a un niveau d'activite 400 mcuries en produits de fission a vie longue. (auteur)

  3. ELGA and TOR installations control device to carry out experiments on-line with a mass-separator by the ASNAPP-2 code

    International Nuclear Information System (INIS)

    Arvai, Z.; Guyash, Ya.; Kuznetsov, V.V.; Fominykh, V.I.

    1984-01-01

    The control device of the tor beta-spectrometer with toroidal magnetic field and the ELGA spectrometer with semiconductor detectors for investigation of conversion electrons, positrons, γ- and α-radiations and lifetime of excited states and periods of isotopes half-decay are described. The block-diagram of the measurement processes, algorithm of the ELGA devce operation, control device circuit, and circuit for connection of analog-to-digital converter with the CAMAC dataway, block-diagram of step motor control, and step motor feeding scheme as well as mechanical and electrical characteristics of the step motor are given. The device is used for spectroscopic investigations of short-lived isotopes on the accelerator proton beam with mass separator

  4. Diagnostic et caractérisation microbiologique des procédés ...

    African Journals Online (AJOL)

    Cependant toutes les exigences des bonnes pratiques de fabrication et de suivi des lots ne sont pas systématiquement respectées comme la mise en place du plan HACCP (Hazard Analysis Critical Control Point) et un suivi sur le plan microbiologique des produits. Ainsi, l'objectif de ce travail est d'évaluer les diagrammes ...

  5. IPPC installations in France and limit values of emission

    International Nuclear Information System (INIS)

    Soleille, S.

    2004-05-01

    The IPPC directive of the 24 September 1996 asked for the main european industrial installations an authorization. This authorization fixes limit values for pollutant emissions. In France, the main industrial installations are controlled since many years in the framework of the regulation on classified installations for the environment protection (ICPE). This report compares the limit values of emissions for the national and prefectorial orders and for the IPPC directive. (A.L.B.)

  6. Contributions to the research programs in nuclear and industrial electronics, domestic production of instrumentation, safety and control systems and equipment for nuclear reactors and auxiliary installations

    International Nuclear Information System (INIS)

    Talpariu, C; Talpariu, J.; Matei, C.

    2001-01-01

    Domestic production of component system and equipment for the control and safety of nuclear facilities was one of the priority objective of the Nuclear Research Institute Pitesti. The problems addressed were particularly related to design and production of analog and digital equipment for measurements, triggering and display of the values of process parameters as well as to regulating complex functions of this equipment. Associated to this effort were the research works concerning: - reliability and in-service life-time of the electronic components and equipment in the safety and control systems for nuclear processes; - radiation endurance of industrial electronic components; utilization of whirling currents in calandria tube testing; - expert systems and applications in nuclear reactor control and safety; design and testing methods of process real time software packages for safety in control critical systems for nuclear domain. There are presented characteristics of the following equipment: 1. amplifier for ionization chambers with triggering comparator circuits for the CANDU 600 reactor shut down system; 2. amplifier for ionization chambers without triggering comparator circuits for power regulating system; 3. safety and regulating computerized system for C9 and C5 cans; 4. acquisition system for dosimetric data in nuclear facilities; 5. program able digital comparator for the reactor shut down system; 6. stationary gamma areal monitors for CANDU 600 reactors and other nuclear facilities

  7. Adaptative control of aero-acoustic instabilities. Application to propulsion systems; Controle adaptatif des instabilites aeroacoustiques. Application aux systemes de propulsion

    Energy Technology Data Exchange (ETDEWEB)

    Mettenleiter, M.

    2000-02-15

    This work treats active adaptive control of aero-acoustic instabilities. In particular, we are interested in an application to solid propellant rockets. The study is part of the research program ASSM coordinated by CNES and ONERA and the aim is to increase the performance of the P230 segmented solid propellant boosters of the Ariane 5 rocket. The work has been carried out in collaboration with other partners of this program. The main objective of this study is the development of control algorithms, able to diminish low frequency instabilities encountered in propulsion systems. First, the instability phenomenon is analyzed in a simplified experimental setup and similarity is shown with instabilities observed in real propulsion systems. This study enables us to conceive adaptive control strategies, which have been tested on three different levels: - In a simplified dynamical simulation; - During an experimental study; - Using full numerical simulations. The three levels of application made it possible to study the behaviour of the different control strategies. We could show that the actuator signal modifies the behaviour of the system on the acoustic level. But as there is a strong interaction between the pressure fluctuations and the hydrodynamic behaviour, the flow structure is also modified by active control. This behaviour corresponds to the simplified model of the phenomenon, which has been used to define the control algorithms. The control action 'at the noise source' makes it possible to distinguish this kind of algorithms from schemes based on the anti-noise principle. After this first part, where we showed the feasibility of control, we particularly considered algorithms which can act in an unknown environment. The information about the system behaviour. which is necessary for convergence of the controller is now obtained in parallel during control. An identification off-line, used at the beginning of the research, is no longer necessary. Self

  8. CABG Surgery Remains the best Option for Patients with Left Main Coronary Disease in Comparison with PCI-DES: Meta-Analysis of Randomized Controlled Trials

    Science.gov (United States)

    Sá, Michel Pompeu Barros Oliveira; Soares, Artur Freire; Miranda, Rodrigo Gusmão Albuquerque; Araújo, Mayara Lopes; Menezes, Alexandre Motta; Silva, Frederico Pires Vasconcelos; Lima, Ricardo Carvalho

    2017-01-01

    Objective To compare the safety and efficacy of coronary artery bypass grafting (CABG) with percutaneous coronary intervention (PCI) using drug-eluting stents (DES) in patients with unprotected left main coronary artery (ULMCA) disease. Methods MEDLINE, EMBASE, CENTRAL/CCTR, SciELO, LILACS, Google Scholar and reference lists of relevant articles were searched for clinical studies that reported outcomes at 1-year follow-up after PCI with DES and CABG for the treatment of ULMCA stenosis. Five studies fulfilled our eligibility criteria and they included a total of 4.595 patients (2.298 for CABG and 2.297 for PCI with DES). Results At 1-year follow-up, there was no significant difference between CABG and DES groups concerning the risk for death (risk ratio [RR] 0.973, P=0.830), myocardial infarction (RR 0.694, P=0.148), stroke (RR 1.224, P=0.598), and major adverse cerebrovascular and cardiovascular events (RR 0.948, P=0.680). The risk for target vessel revascularization (TVR) was significantly lower in the CABG group compared to the DES group (RR 0.583, P<0.001). It was observed no publication bias regarding the outcomes, but only the outcome TVR was free from substantial statistical heterogeneity of the effects. In the meta-regression, there was evidence that the factor "female gender" modulated the effect regarding myocardial infarction rates, favoring the CABG strategy. Conclusion CABG surgery remains the best option of treatment for patients with ULMCA disease, with lower TVR rates. PMID:29211222

  9. Oligomerization of Bacillus subtilis DesR is required for fine tuning regulation of membrane fluidity.

    Science.gov (United States)

    Najle, Sebastián R; Inda, María E; de Mendoza, Diego; Cybulski, Larisa E

    2009-10-01

    The DesK-DesR two-component system regulates the order of membrane lipids in the bacterium Bacillus subtilis by controlling the expression of the des gene coding for the delta 5-acyl-lipid desaturase. To activate des transcription, the membrane-bound histidine kinase DesK phosphorylates the response regulator DesR. This covalent modification of the regulatory domain of dimeric DesR promotes, in a cooperative fashion, the hierarchical occupation of two adjacent, non-identical, DesR-P binding sites, so that there is a shift in the equilibrium toward the tetrameric active form of the response regulator. However, the mechanism of regulation of DesR activity by phosphorylation and oligomerization is not well understood. We employed deletion analysis and reporter fusions to study the role of the N-terminal domain on DesR activity. In addition, electromobility shift assays were used to analyze the binding capacity of the transcription factor to deletion mutants of the des promoter. We show that DesR lacking the N-terminal domain is still able to bind to the des promoter. We also demonstrate that if the RA site is moved closer to the -35 region of Pdes, the adjacent site RB is dispensable for activation. Our results indicate that the unphosphorylated regulatory domain of DesR obstructs the access of the recognition helix of DesR to its DNA target. In addition, we present evidence showing that RB is physiologically relevant to control the activation of the des gene when the levels of DesR-P reach a critical threshold.

  10. The control of artificial radio-elements of medical use in France; Le controle des radioelements artificiels a usage medical en France

    Energy Technology Data Exchange (ETDEWEB)

    Cohen, Y. [Commissariat a l' energie atomique et aux energies alternatives - CEA, Centre d' etudes nucleaires de Saclay, Service des Radio-elements artificiels (France)

    1960-07-01

    Artificial radio-elements are sometimes used in hospitals or laboratories possessing specific equipment and certified staff. These radio-elements are produced within the Saclay Nuclear Centre, and, if they are aimed to a medical use, are submitted to a pharmaceutical control which the issue is addressed in this report. After a recall of the preparation of these radio-elements, the author describes physical controls (determination of radioactivity, measurement of colloidal particle size, impurity content), and biological controls performed on these radio-elements. Reprint of a paper published in Annales pharmaceutiques francaises, tom. XVII, p. 250-260, 1959.

  11. Photonique des Morphos

    CERN Document Server

    Berthier, Serge

    2010-01-01

    La photonique est déjà présente dans notre vie quotidienne, et on attend maintenant que la manipulation des photons permette aussi le traitement logique des informations. Cependant, l’élément de base qui permet cette manipulation de la lumière, le cristal photonique, est d’une réalisation complexe et mal contrôlée. Dans la course à la maîtrise de la lumière, les structures photoniques naturelles ont beaucoup à nous apprendre. C’est ce que nous montre Serge Berthier qui étudie dans ce livre la structure des écailles des Morphos. Tenant compte de l’essor récent des approches biomimétiques, il présente de manière détaillée plus de dix-huit techniques expérimentales utilisées pour ses analyses, ainsi que les diverses approches théoriques développées pour la modélisation de structures multi-échelles complexes. Première étude quasi-exhaustive des structures fines d’un genre et des propriétés optiques ainsi que colorimétriques générées, ce livre fournit aux entomologiste...

  12. Droit des organisations internationales

    CERN Document Server

    Sorel, Jean-Marc; Ndior, Valère

    2013-01-01

    Cet ouvrage collectif offre aux enseignants et chercheurs en droit international, aux praticiens et aux étudiants, une analyse actualisée du droit des organisations internationales. Il dresse en cinq parties un tableau, illustré par des exemples variés, des problématiques que soulève le phénomène polymorphe d institutionnalisation de la société internationale. La première partie est consacrée au phénomène des « organisations internationales », sous l angle à la fois de l institutionnalisation progressive des relations internationales et de la difficulté à cerner une catégorie unifiée. La deuxième partie rend compte de la création, de la disparition et des mutations des organisations internationales, ici envisagées comme systèmes institutionnels et ordres juridiques dérivés. La troisième partie analyse l autonomie que l acquisition de la personnalité juridique et de privilèges et immunités, un organe administratif intégré, un personnel ou un budget propres confèrent aux organi...

  13. Advanced Micro Grid Energy Management Coupled with Integrated Volt/VAR Control for Improved Energy Efficiency, Energy Security, and Power Quality at DoD Installations

    Science.gov (United States)

    2016-10-28

    maintaining the data needed, and completing and reviewing this collection of information. Send comments regarding this burden estimate or any other...voltage adjustments was tedious and resulted in less than expected savings. The building level voltage control equipment was not financially viable...is defined as the ratio of percentage of power consumption reduction over the percentage in voltage reduction. %% (3) The effects of CVR

  14. Experimental and numerical study of the active control of jets inside combustion chambers; Etude experimentale et numerique du controle actif de jets dans des chambres de combustion

    Energy Technology Data Exchange (ETDEWEB)

    Faivre, V

    2003-12-15

    Combustion instabilities occur when the flame heat release couples with the acoustic waves propagating in the combustion chamber. This phenomenon can lead to strong vibrations and noise but also, sometimes, to the complete combustion device failure. That is the reason why so many studies focus on the control of those instabilities. The method chosen in this study consists in an active control device (or set of actuators) having a strong effect on the mixing of the burner exhaust flow with the ambient fluid. The model configuration studied consists in a non reactive jet of air controlled by four small tangential secondary jets. Experiments have been carried out to optimize the control device geometry. The configuration identified as the most efficient, in terms of mixing enhancement, has been simulated through Large Eddy Simulations (LES). The objective of the numerical part of the present work is double. First, the numerical simulations provide a better understanding of the phenomena occurring when the control is on. Then, it is shown that LES can be considered as a tool to predict the effects of a control device on a flow. (author)

  15. The controlled of the materials by the method of oscillation at the reactor core of Chatillon; Le controle des materiaux par la methode d'oscillation a la pile de Chatillon

    Energy Technology Data Exchange (ETDEWEB)

    Breton, D [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1955-07-01

    Nuclear controls has for aim to determine the validity of materials intended to be used for the construction of the reactor core. The cross-section of capture of these materials has to be measured while comparing them either to a standard of the same material, either to an element of cross-section supposed known. We studied the disruption of the working of the reactor generated by the periodic introduction of a sample of the studied material. This method is based on the measure of the phase angle of the signal provided by the ionization chamber. This signal results from the composition of a local signal and an aggregate signal due to the effects of diffusion and capture. This method permits the comparison of the capture of 2 samples very dispersive and few capturing as the graphite, the beryllium, the beryllium oxide, with a good precision. It permits to determine the cross-section of capture of elements as magnesium or aluminum. (M.B.) [French] Le controle nucleaire a pour but de determiner la valeur des materiaux destines a etre utilises pour la construction des piles. II s'agit de mesurer la section efficace de capture de ces materiaux en les comparant soit a un echantillon etalon du meme materiau, soit a un element de section efficace supposee connue. On etudie la perturbation du fonctionnement de la pile engendree par l'introduction periodique d'un echantillon du materiau a etudier. Cette methode est basee sur la mesure de l'angle de phase du signal fourni par la chambre d'ionisation. Ce signal resulte de la composition d'un signal local et d'un signal global dus aux effets de diffusion et de capture. Cette methode permet la comparaison de la capture de 2 echantillons de corps tres diffusants et peu capturants comme le graphite,le beryllium, l'oxyde de beryllium, avec une bonne precision. Elle permet par ailleurs de determiner la section efficace de capture de corps tels que le magnesium ou l'aluminium. (M.B.)

  16. Installations having pressurised fluid circuits

    International Nuclear Information System (INIS)

    Rigg, S.; Grant, J.

    1977-01-01

    Reference is made to nuclear installations having pressurised coolant flow circuits. Breaches in such circuits may quickly result in much damage to the plant. Devices such as non-return valves, orifice plates, and automatically operated shut-off valves have been provided to prevent or reduce fluid flow through a breached pipe line, but such devices have several disadvantages; they may present large restrictions to normal flow of coolant, and may depend on the operation of ancillary equipment, with consequent delay in bringing them into operation in an emergency. Other expedients that have been adopted to prevent or reduce reverse flow through an upstream breach comprise various forms of hydraulic counter flow brakes. The arrangement described has at least one variable fluid brake comprising a fluidic device connected into a duct in the pressurised circuit, the device having an inlet, an outlet, a vortex chamber between the inlet and outlet, a control jet for introducing fluid into the vortex chamber, connections communicating the inlet and the outlet into one part of the circuit and the control jet into another region at a complementary pressure so that, in the event of a breach in the circuit in one region, fluid passes from the other region to enter the vortex chamber to stimulate pressure to create a flow restricting vortex in the chamber that reduces flow through the breach. The system finds particular application to stream generating pressure tube reactors, such as the steam generating heavy water reactor at UKAEA, Winfrith. (U.K.)

  17. Main results obtained in France in the development of the gaseous diffusion process for uranium isotope separation; Principaux resultats obtenus en France dans les etudes sur la separation des isotopes de l'uranium par diffusion gazeuse

    Energy Technology Data Exchange (ETDEWEB)

    Frejacques, C; Bilous, O; Dixmier, J; Massignon, D; Plurien, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    The main problems which occur in the study of uranium isotope separation by the gaseous diffusion process, concern the development of the porous barrier, the corrosive nature of uranium hexafluoride and also the chemical engineering problems related to process design and the choice of best plant and stage characteristics. Porous barriers may be obtained by chemical attack of non porous media or by agglomeration of very fine powders. Examples of these two types of barriers are given. A whole set of measurement techniques were developed for barrier structure studies, to provide control and guidance of barrier production methods. Uranium hexafluoride reactivity and corrosive properties are the source of many difficult technological problems. A high degree of plant leak tightness must be achieved. This necessity creates a special problem in compressor bearing design. Barrier lifetime is affected by the corrosive properties of the gas, which may lead to a change of barrier structure with time. Barrier hexafluoride permeability measurements have helped to make a systematic study of this point. Finally an example of a plant flowsheet, showing stage types and arrangements and based on a minimisation of enriched product costs is also given as an illustration of some of the chemical engineering problems present. (author) [French] Les principaux problemes qui se sont poses dans l'etude de la separation des isotopes de l'uranium par diffusion gazeuse, sont ceux relatifs a l'obtention de barrieres poreuses, ceux lies a l'utilisation de l'hexafluorure d'uranium, enfin les problemes de genie chimique relatifs au procede et a l'agencement optimum des etages et des cascades entre elles. On peut obtenir des barrieres poreuses soit par attaque de membranes pleines, soit par agglomeration de poudres de petites dimensions. Des exemples de ces deux types de barrieres seront donnes. L'etude des proprietes de texture des barrieres obtenues, necessaire pour orienter les recherches de

  18. The Economical Application of Non-Destructive Testing to Reactor Components, Especially Jacket Tubing; Avantages Economiques du Controle Non Destructif des Pieces de Reacteurs, Notamment des Tubes de Gainage; Ehkonomicheskoe primenenie nedestruktivnykh ispytanij dlya reaktornykh komponentov, v chastnosti obolochechnykh trub; Aplicacion en Condiciones Economicas de Ensayos No Destructivos a las Piezas de los Reactores, en Especial a los Tubos de Revestimiento

    Energy Technology Data Exchange (ETDEWEB)

    Renken, C. J. [Metallurgy Division Argonne National Laboratory Argonne, IL (United States)

    1965-10-15

    electro-magnetic method for technical as well as economic reasons. The optimum area of application of these two methods is explained as well as the large area of overlap where results produced by well- designed and properly operated equipment of both types are essentially equivalent. Spurious defect indications contribute directly to increased component costs, so an evaluation of these effects for both the ultrasonic and the electromagnetic test methods is included for several commonly encountered sources of spurious defect signals. The experience in the application of these methods at Argonne National Laboratory on relatively large quantities of tubing from various sources are recounted from the standpoint of the lowest possible inspection cost per unit length of tubing. This section also summarizes experience gained at Argonne with the newer pulsed electromagnetic test methods. The critical but generally unappreciated role of tube diameter and wall thickness on tube inspection cost is discussed. Since the question of economical inspection is closely related to allowable defect levels, defect levels and standards in use at Argonne are covered. Finally, the practical and theoretical barriers to reduced component inspection costs are enumerated and a projection of what possible reductions in cost might be attainable in the future with the ultrasonic and electromagnetic test methods is attempted. (author) [French] Le reacteur ideal aurait entre autres caracteristiques celle de ne pas exiger de controles non destructifs. Cet ideal, comme tant d'autres, ne sera probablement jamais atteint. Dans l'etude de tout reacteur pour lequel le prix de revient constitue un facteur important, il faudrait envisager la question de savoir si les pieces de ce reacteur pourront etre essayees de facon economique en meme temps que l'on examine les possibilites de fabrication. Cette partie du memoire contient quelques considerations a ce propos ainsi qu'un expose de l'importance des essais non

  19. The insurance of nuclear installations

    International Nuclear Information System (INIS)

    Francis, H.W.

    1977-01-01

    A brief account is given of the development of nuclear insurance. The subject is dealt with under the following headings: the need for nuclear insurance, nuclear insurance pools, international co-operation, nuclear installations which may be insured, international conventions relating to the liability of operators of nuclear installations, classes of nuclear insurance, nuclear reactor hazards and their assessment, future developments. (U.K.)

  20. Multifunctional camping building full of sustainable technology. All installations controlled through the internet; Multifunctioneel kampeergebouw vol duurzame techniek. Alle installaties zijn via internet te beheren

    Energy Technology Data Exchange (ETDEWEB)

    Schoemaker, E.

    2011-06-15

    A fully integrated, computerized control system is not just suitable for large companies; it can also be realized by smaller organizations as part of their sustainability policy. Eventually, the investment can result in a significant saving. This article discussed the example of scouting and camping site St. Walrick in Overasselt (the Netherlands) [Dutch] Een volledig geintegreerd, computergestuurd beheersysteem is niet alleen geschikt voor grote bedrijven. Het is ook bereikbaar voor kleinere organisaties en past vaak heel goed in hun duurzaamheidbeleid. Uiteindelijk kan de investering een behoorlijke besparing opleveren. In dit artikel wordt het voorbeeld van scouting- en kampeerterrein St. Walrick in Overasselt (Gelderland) besproken.

  1. Licensing system for primary category radioactive installations

    International Nuclear Information System (INIS)

    Ramirez Riquelme, Angelica Beatriz

    1997-01-01

    The development of a licensing system for primary category radioactive installations is described, which aims to satisfy the needs of the Chilean Nuclear Energy Commission's Department of Nuclear and Radiological Safety, particularly the sections for Licensing Outside Radioactive Installations and Safety Control. This system involves the identification, control and inspection of the installations, their personnel and connected activities, for the purpose of protecting the population's health and the environment. Following the basic cycle methodology, a systems analysis and engineering stage was prepared, establishing the functions of the system's elements and defining the requirements, based on interviews with the users. This stage was followed by the design stage, focusing on the data structure, the software architecture and the procedural detail. The codification stage followed, which translated the design into legible machine-readable format. In the testing stage, the entries that were defined were proven to produce the expected data. Finally and operational and maintenance stage was developed, when the system was installed and put to use. All the above generated a useful system for the Licensing section of the Department of Nuclear and Radiological Safety, since it provides faster and easier access to information. A project is described that introduces new development tools in the Computer department following standards established by the C.CH.E.N. (author)

  2. Second order transient effects in a gaseous diffusion plant; Effets transitoires du second ordre dans une installation de separation isotopique

    Energy Technology Data Exchange (ETDEWEB)

    Bouligand, O M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    Perturbations applied to various parameters of an isotope separation plant indices an average effect on production. This effect is determined for a finite cascade over infinite reservoir. Perturbations on product flow rate and inter-stage transports are considered. (author) [French] Les fluctuations des divers parametres d'une installation de separation isotopique alterent la moyenne temporelle de la concentration du produit enrichi, Cet effet peut etre calcule dans le cas d'une cascade constante alimentee a sa base par un reservoir infini pour des fluctuations qui affectent les capacites des etages et le debit de production. (auteur)

  3. Origin, Nature, Disposal and Control of Radioactive Wastes Arising from the Use of Radioisotopes; Origine, Nature, Elimination et Controle des Dechets Radioactifs Decoulant de l'Emploi des Radioisotopes; 041f 0420 041e 0414 ; Origen, Naturaleza, Evacuacion y Control de los Desechos Radiactivos Producidos en la Utilizacion de Radioisotopos

    Energy Technology Data Exchange (ETDEWEB)

    Kenny, A. W. [Ministry of Housing and Local Government (United Kingdom)

    1960-07-01

    The paper describes the different types of radioactive waste arising from industrial, medical and scientific uses of radioisotopes. An outline is given of methods used for waste disposal, depending on the content of radioactivity. (author) [French] L'auteur decrit les differents types de dechets radioactifs decoulant de l'utilisation de radioisotopes dans l'industrie, en medecine et dans la science. Il donne un apercu des methodes employees pour l'elimination des dechets selon leur teneur en elements radioactifs. (author) [Spanish] En la memoria se describen los diferentes tipos de desechos radiactivos producidos por la utilizacion industrial, medica y cientifica de los radioisotopos y se hace una exposicion de los metodos empleados para la evacuacion de desechos segun su contenido radiactivo. (author) [Russian] V doklade daetsja opisanie razlichnyh tipov radioaktivnyh othodov, voznikajushhih v rezul'tate promyshlennogo, medicinskogo i nauchnogo ispol'zovanija radioizotopov. Osobo razbirajutsja metody, ispol'zuemye dlja udalenija radioaktivnyh othodov v zavisimosti ot ih radioaktivnosti. (author)

  4. Dynamic Response of Control Servo System Installed in NAES-Equipped SB2C-5 Airplane (BuAer No. 83135)

    Science.gov (United States)

    Smaus, Louis H.; Stewart, Elwood C.

    1950-01-01

    Dynamic--response measurements for various conditions of displacement and rate signal input, sensitivity setting, and simulated hinge moment were made of the three control-surface servo systems of an NAES-equipped remote-controlled airplane while on the ground. The basic components of the servo systems are those of the General Electric Company type G-1 autopilot using electrical signal. sources, solenoid-operated valves, and hydraulic pistons. The test procedures and difficulties are discussed, Both frequency and transient-response data, are presented and comparisons are made. The constants describing the servo system, the undamped natural frequency, and the damping ratio, are determined by several methods. The response of the system with the addition of airframe rate signal is calculated. The transfer function of the elevator surface, linkage, and cable system is obtained. The agreement between various methods of measurement and calculation is considered very good. The data are complete enough and in such form that they may be used directly with the frequency-response data of an airplane to predict the stability of the autopilot-airplane combination.

  5. Santé des adolescents et des jeunes au Burkina Faso : état des ...

    African Journals Online (AJOL)

    Il s'est agi d'une étude évaluative ayant utilisé une revue documentaire associée à une interview des acteurs clés et un atelier de validation et d'identification des interventions pertinentes pour un plan stratégique national. La situation de la santé des adolescents et des jeunes est caractérisée par des grossesses précoces ...

  6. Monitoring of Fresh Waters Used for Dispersal of Radioactive Wastes; Controle des Eaux Fluviales Utilisees pour la Dispersion des Dechets Radioactifs; 0418 0417 041c 0414 ; Monitoraje de las Aguas Dulces Utilizadas para la Dispersion de Desechos Radiactivos

    Energy Technology Data Exchange (ETDEWEB)

    Ophel, I. L. [Environmental Research and Radiation Dosimetry Branch, Division of Biology and Health Physics, Atomic Energy of Canada Limited, Chalk River, ON (Canada)

    1960-07-01

    The Ottawa River is a very large river. The water has a low solids content with little plankton. In many ways the river resembles a lake. Effluent is diluted, into a great volume of low-activity cooling water and enters the river at a concentration of radionuclides less than the MPCW for occupational workers. The concentration of total B {gamma} radionuclides above the plant is 2 x 10{sup -8} {mu}c/ml, and 1.6 km below the plant it is 3 x 10{sup -8} {mu}c/ml. Sampling of the river bottom shows that its radioactivity has been decreasing for several years in spite of continuous addition of activity adsorbed on colloidal silica deposited from the water. Large fish are the only river organisms used by man. Traces of Sr{sup 90} have occasionally been found in the bones, but none in the flesh. Although P{sup 32} forms only 0.04% of the total radioactivity found in the effluent, it makes up 75-95% of the total radionuclides found in most samples. A maximum concentration of 10{sup -3} {mu}c/g wet weight has been found in the whole bodies of small perch. (author) [French] Ottawa est un tres grand fleuve. Ses eaux ne contiennent que peu' de substances solides, notamment peu de plancton. A bien des egards, ce fleuve ressemble a un lac. Les effluents sont dilues dans. une grande quantite d'eau de refroidissement, de faible activite; lorsqu'ils penetrent dans le fleuve, leur concentration en radionuclides est inferieure a la concentration maximum admissible dans l'eau pour les travailleurs exposes professionnellement. La concentration totale en emetteurs beta et gamma est 2 x 10{sup -8} {mu}c/ml en amont de l'usine et 3 x 10{sup -8} {mu}c/ml a 1,6 km en aval. Les echantillons preleves au fond du fleuve montrent que sa radioactivite diminue depuis plusieurs annees, en depit des apports continuels de l'activite adsorbee par les silices colloiedaux en suspension qui se deposent. Les seuls organismes presents dans le fleuve et utilises par l'homme sont les gros poissons. On a

  7. Installation package for a solar heating and hot water system

    Science.gov (United States)

    1978-01-01

    Development and installation of two commercial solar heating and hot water systems are reported. The systems consist of the following subsystems: collector, storage, transport, hot water, auxiliary energy and controls. General guidelines are provided which may be utilized in development of detailed installation plans and specifications. In addition, operation, maintenance and repair of a solar heating and hot water system instructions are included.

  8. DES Science Portal: Computing Photometric Redshifts

    Energy Technology Data Exchange (ETDEWEB)

    Gschwend, Julia [LIneA, Rio de Janeiro

    2016-01-01

    An important challenge facing photometric surveys for cosmological purposes, such as the Dark Energy Survey (DES), is the need to produce reliable photometric redshifts (photo-z). The choice of adequate algorithms and configurations and the maintenance of an up-to-date spectroscopic database to build training sets, for example, are challenging tasks when dealing with large amounts of data that are regularly updated and constantly growing. In this paper, we present the first of a series of tools developed by DES, provided as part of the DES Science Portal, an integrated web-based data portal developed to facilitate the scientific analysis of the data, while ensuring the reproducibility of the analysis. We present the DES Science Portal photometric redshift tools, starting from the creation of a spectroscopic sample to training the neural network photo-z codes, to the final estimation of photo-zs for a large photometric catalog. We illustrate this operation by calculating well calibrated photo-zs for a galaxy sample extracted from the DES first year (Y1A1) data. The series of processes mentioned above is run entirely within the Portal environment, which automatically produces validation metrics, and maintains the provenance between the different steps. This system allows us to fine tune the many steps involved in the process of calculating photo-zs, making sure that we do not lose the information on the configurations and inputs of the previous processes. By matching the DES Y1A1 photometry to a spectroscopic sample, we define different training sets that we use to feed the photo-z algorithms already installed at the Portal. Finally, we validate the results under several conditions, including the case of a sample limited to i<22.5 with the color properties close to the full DES Y1A1 photometric data. This way we compare the performance of multiple methods and training configurations. The infrastructure presented here is an effcient way to test several methods of

  9. Characterisation, modelling and control of advanced scenarios in the european tokamak jet; Caracterisation, modelisation et controle des scenarios avances dans le tokamak europeen jet

    Energy Technology Data Exchange (ETDEWEB)

    Tresset, G

    2002-09-26

    The advanced scenarios, developed for less than ten years with the internal transport barriers and the control of current profile, give rise to a 'new deal' for the tokamak as a future thermonuclear controlled fusion reactor. The Joint European Torus (JET) in United Kingdom is presently the most powerful device in terms of fusion power and it has allowed to acquire a great experience in these improved confinement regimes. The reduction of turbulent transport, considered now as closely linked to the shape of current profile optimised for instance by lower hybrid current drive or the self-generated bootstrap current, can be characterised by a dimensionless criterion. Most of useful information related to the transport barriers are thus available. Large database analysis and real time plasma control are envisaged as attractive applications. The so-called 'S'-shaped transport models exhibit some interesting properties in fair agreement with the experiments, while the non-linear multivariate dependencies of thermal diffusivity can be approximated by a neural network, suggesting a new approach for transport investigation and modelling. Finally, the first experimental demonstrations of real time control of internal transport barriers and current profile have been performed on JET. Sophisticated feedback algorithms have been proposed and are being numerically tested to achieve steady-state and efficient plasmas. (author)

  10. Characterisation, modelling and control of advanced scenarios in the european tokamak jet; Caracterisation, modelisation et controle des scenarios avances dans le tokamak europeen jet

    Energy Technology Data Exchange (ETDEWEB)

    Tresset, G

    2002-09-26

    The advanced scenarios, developed for less than ten years with the internal transport barriers and the control of current profile, give rise to a 'new deal' for the tokamak as a future thermonuclear controlled fusion reactor. The Joint European Torus (JET) in United Kingdom is presently the most powerful device in terms of fusion power and it has allowed to acquire a great experience in these improved confinement regimes. The reduction of turbulent transport, considered now as closely linked to the shape of current profile optimised for instance by lower hybrid current drive or the self-generated bootstrap current, can be characterised by a dimensionless criterion. Most of useful information related to the transport barriers are thus available. Large database analysis and real time plasma control are envisaged as attractive applications. The so-called 'S'-shaped transport models exhibit some interesting properties in fair agreement with the experiments, while the non-linear multivariate dependencies of thermal diffusivity can be approximated by a neural network, suggesting a new approach for transport investigation and modelling. Finally, the first experimental demonstrations of real time control of internal transport barriers and current profile have been performed on JET. Sophisticated feedback algorithms have been proposed and are being numerically tested to achieve steady-state and efficient plasmas. (author)

  11. Materials contamination control in the microelectronic industry; Controle de la contamination des materiaux dans l`industrie de la micro-electronique

    Energy Technology Data Exchange (ETDEWEB)

    Tardif, F

    1994-12-31

    This paper deals with many aspects of the contamination of materials in the microelectronic industry. The contamination`s control of chemicals, process gases, silicon and the survey of the ions free water`s purity are treated. (TEC). 29 figs., 7 tabs.

  12. Automatic optimisation of beam orientations using the simplex algorithm and optimisation of quality control using statistical process control (S.P.C.) for intensity modulated radiation therapy (I.M.R.T.); Optimisation automatique des incidences des faisceaux par l'algorithme du simplexe et optimisation des controles qualite par la Maitrise Statistique des Processus (MSP) en Radiotherapie Conformationnelle par Modulation d'Intensite (RCMI)

    Energy Technology Data Exchange (ETDEWEB)

    Gerard, K

    2008-11-15

    Intensity Modulated Radiation Therapy (I.M.R.T.) is currently considered as a technique of choice to increase the local control of the tumour while reducing the dose to surrounding organs at risk. However, its routine clinical implementation is partially held back by the excessive amount of work required to prepare the patient treatment. In order to increase the efficiency of the treatment preparation, two axes of work have been defined. The first axis concerned the automatic optimisation of beam orientations. We integrated the simplex algorithm in the treatment planning system. Starting from the dosimetric objectives set by the user, it can automatically determine the optimal beam orientations that best cover the target volume while sparing organs at risk. In addition to time sparing, the simplex results of three patients with a cancer of the oropharynx, showed that the quality of the plan is also increased compared to a manual beam selection. Indeed, for an equivalent or even a better target coverage, it reduces the dose received by the organs at risk. The second axis of work concerned the optimisation of pre-treatment quality control. We used an industrial method: Statistical Process Control (S.P.C.) to retrospectively analyse the absolute dose quality control results performed using an ionisation chamber at Centre Alexis Vautrin (C.A.V.). This study showed that S.P.C. is an efficient method to reinforce treatment security using control charts. It also showed that our dose delivery process was stable and statistically capable for prostate treatments, which implies that a reduction of the number of controls can be considered for this type of treatment at the C.A.V.. (author)

  13. Autonomous intelligent cruise control (AICC) - a major contribution to the enhancement of comfort and active driving safety; Autonome Intelligente Geschwindigkeitsregelung (AICC) - ein Beitrag zur Steigerung des Komforts und der aktiven Fahrsicherheit

    Energy Technology Data Exchange (ETDEWEB)

    Dorissen, H.T.; Hoever, N.

    1996-07-01

    Within the framework of the PROMETHEUS-Project research and development work on different systems has been carried out to improve traffic efficiency, environment and safety. The Autonomous Intelligent Cruise Control has emerged as one of the projects with the brightest future. In contrast to conventional cruise control systems, the AICC system controls not only the speed of the vehicle, but also its distance to vehicles ahead. In practice this means that the driver is additionally supported by the automatic variation of the set vehicle speed according to traffic conditions. This results in a major improvement in driving comfort as well as in traffic safety. In this article, Hella describes the principal technical facts and also highlights the advantages and possible applications of the first generation of AICC. (orig.) [Deutsch] Im Rahmen des PROMETHEUS-Projektes sind unterschiedliche Systeme erforscht und entwickelt worden, um den Verkehr sicherer, umweltfreundlicher und effizienter zu gestalten. Der `Autonome Intelligente Geschwindigkeitsregler` ist hieraus als eines der zukunftstraechtigsten Projekte hervorgegangen. Ein AICC-System regelt die Geschwindigkeit sowie den Abstand zu einem vorausfahrenden Fahrzeug. Im Vergleich zum konventionellen Geschwindigkeitsregler wird der Fahrer zusaetzlich durch die automatische Anpassung der Sollgeschwindigkeit an die gegebene Verkehrssituation unterstuetzt. Dies ermoeglicht eine entsprechende Verbesserung des Fahrkomforts und letztendlich auch der Verkehrssicherheit. In diesem Beitrag zeigt Hella neben den grundsaetzlichen technischen Zusammenhaengen eine moegliche Realisierung, die Vorteile und den Nutzen fuer ein AICC-System der ersten Generation auf. (orig.)

  14. Dental Encounter System (DES)

    Data.gov (United States)

    Department of Veterans Affairs — Dental Encounter System (DES) is an automated health care application designed to capture critical data about the operations of VA Dental Services. Information on...

  15. Diethylstilbestrol (DES) and Cancer

    Science.gov (United States)

    ... DES-exposed grandchildren have? Researchers are also studying possible health effects among women and men who are the children ... for unexposed men. In addition, researchers are studying possible health effects on the grandchildren of mothers who were exposed ...

  16. Table des illustrations

    OpenAIRE

    2016-01-01

    Tableaux Dates d’inauguration des grands hôtels japonais entre 1860 et 1945… 19 Histoire, tourisme et hôtellerie en Corée depuis les années 1870… 59-60 Dates d’inauguration des grands hôtels chinois depuis 1863… 84 Les hôtels de luxe et leurs capacités d’hébergement en Corée en 2000… 103 Les flux de personnes suscités par les hôtels « super luxe » de Séoul en 2000… 105 L’activité des grands hôtels à Séoul en 1999 (en wons)… 106 Propriété et gestion des grands hôtels à Séoul en 1999…. 110 La c...

  17. Direction des Publications

    African Journals Online (AJOL)

    Synthese

    potential and surface properties of their mixtures were investigated, in an ... suppose that the electrostatic repulsive interactions between the two anion ... concentration, et de la conformation des ..... proteins and polysaccharides in solutions,.

  18. New system technologies implemented at Kozloduy 3 and 4 (WWER 440-230) for containment leakage and H2 control in severe accident situations - Design, qualification, installation, commissioning

    International Nuclear Information System (INIS)

    Feuerbach, R.; Eckardt, B.; Kastner, B.

    2005-01-01

    In order to reduce the residual risk associated with hypothetical severe nuclear accidents, systems and components for filtered containment venting and H 2 reduction were developed. During severe accident scenarios large quantities of hydrogen and radioactive material may be released into the containment atmosphere within a short period of time. In the event of internal over pressurization due to hypothetical severe accident sequences a pressure barrier system has to be created to confine the activity in the containment. Unavoidable releases of activity to the environment have to be minimized to a great extent as possible. Research into the hypothetical event of core melt accidents has continued and new accident mitigation technologies have been developed. Decisions have been taken to implement these new mitigation measures in operating nuclear power plants to mitigate severe accidents consequences. In order to prevent loss of containment integrity as a result of over pressurization, nuclear power plants in the Federal Republic of Germany as well as in most other European countries have been or will be back-fitted with systems for filtered venting of the containment atmosphere and systems for H 2 -control. Similar technologies for containment venting system and H 2 control have been now implemented in the first WWER 440-230 units of Kozloduy 3 and 4. Following OECD recommendations sever accident situations were analyzed and a design of countermeasures have been performed. Main goal of the developed countermeasures was to overcome the WWER 440-230 containment design specifics like, leakage rate behavior, limited available containment volume combined with the feature of high availability of electrical supply at multiple plant sites. Further more the design of counter measures considers the common use for Kozloduy unit 3 and 4. The analysis of postulated severs accident situation - without countermeasures - showed significant increase of H 2 /O 2 concentration in the

  19. Pollution active control: a strategy for a clean and efficient combustion; Le controle actif des polluants: une strategie pour une combustion propre et efficace

    Energy Technology Data Exchange (ETDEWEB)

    Lacas, F. [CNRS Ecole Centrale de Paris, 75 (France). Laboratoire E.M2.C

    1996-12-31

    The active control NOx reduction concept has been applied on two burners (20 kW and 840 kW), using a rotary valve enabling an excitation in the 100 to 1000 Hz band, that can be mounted on existing appliances such as domestic or industrial boilers. NOx level reduction may reach 15 pc for the 20 kW burner, 25 pc for the 840 kW burner with domestic fuel oil and 35 pc for the 840 kW burner using pyridine doped domestic fuel oil. Mechanisms are detailed through flow visualization, and consist mainly in an annular vortex inducing a fuel/air pre-mixing favourable to a large decrease in NOx generation level and establishing a staged process such as in re-burning processes. The pulsed combustion process may be also combined to other pollution control systems

  20. Coordination de la sécurité de l'installation du LHC et de ses expériences

    CERN Document Server

    Vadon, M

    2005-01-01

    La coordination de sécurité pour l'installation du LHC et de ses expériences a été mise en place lors du démantèlement du LEP. Depuis, les contractants et les surveillants de chantier ont fait beaucoup de progrès en matière de sécurité et les procédures en vigueur sont maintenant suivies. Néanmoins, des accidents et incidents se produisent encore et pourraient être facilement évités. Un incident important, des dommages sérieux aux équipements, ou pire un accident mortel affecteraient sérieusement le projet LHC. L'analyse des causes des accidents récents révèle toujours une marge d'amélioration, en particulier en ce qui concerne l'analyse à priori des procédures l'installation et des méthodes de travail. L'intégration des aspects de sécurité dès la phase de conception et l'application stricte des règles dans tout le projet sont les clefs pour une meilleure sécurité des chantiers. Ceci ne peut être réalisable que si la sécurité est abordée de la même manière que la qualit...

  1. Competent person for radiation protection. Practical radiation protection for base nuclear installations and installations classified for the environment protection

    International Nuclear Information System (INIS)

    Pin, A.; Perez, S.; Videcoq, J.; Ammerich, M.

    2008-01-01

    This book corresponds to the practical module devoted to the base nuclear installations and to the installations classified for the environment protection, that is to say the permanent nuclear installations susceptible to present risks for the public, environment or workers. Complied with the legislation that stipulates this module must allow to apply the acquired theoretical training to practical situations of work, it includes seven chapters as follow: generalities on access conditions in regulated areas of nuclear installation,s or installations classified for environment protection and clothing against contamination; use of control devices and management of damaged situations; methodology of working place studies, completed by the application to a real case of a study on an intervention on a containment wall; a part entitled 'take stock of the situation' ends every chapter and proposes to the reader to check its understanding and acquisition of treated knowledge. (N.C.)

  2. Successful pipeline installation for Parque das Conchas development; Subsea installation

    Energy Technology Data Exchange (ETDEWEB)

    Bartz, Cesar

    2010-07-01

    Subsea 7 has successfully delivered again in Brazilian deep-waters. The subsea engineering and construction company has recently completed pipeline installation activities for the Parque das Conchas (BC-10) development, offshore Brazil. (AG)

  3. La revolution des savants

    CERN Document Server

    Chavanne, A

    1989-01-01

    Premiere cassette : - 1666 : impact de la creation de l'Academie des Sciences par Colbert, trente ans apres le proces de Galile, et au moment des disparitions de Pascal, Descartes et Fermat. Elle dirigee par le hollandais Huyggens jusqu'a sa fuite de France au moment de la revocation de l'Edit de Nantes. - 1750 : l'Encyclopedie (ou "Dictionnaire raisonne des Sciences, des Arts et des Metiers") de Diderot et d'Alembert, soutenus par Malherbes, Buffon, Condorcet et Rousseau. - 1789 : Revolution francaise. - 8 aout 1793 : l'Assemblee, par une declaration de Marat, dissout l'Academie des Sciences. Celle-ci continue cependant ses travaux pour les poids et mesures jusqu'en 1795. - la Terreur : la condamnation a mort, pas au nom d'une "Revolution qui n'a pas besoin de savants" mais pour d'autres raisons, de trois grands hommes de science : Lavoisier, Bailly et Condorcet. - 1793-1794 : Au printemps 93, le Comite de Salut Publique s'inquiete du demi-million de soldats etrangers de toutes les pays frontaliers qui essai...

  4. Integrated natural gas pipeline control and customer service system of Gasum; Le systeme integre de controle des canalisations de gaz et de service au consommateur chez Gasum

    Energy Technology Data Exchange (ETDEWEB)

    Aho, J.; Manty, O.; Ahlnas, B. [Gasul Oy (Finland)

    2000-07-01

    Due to the rapid development of the information technology, ageing is not the only driving force for replacing old computer systems with more sophisticated ones. The Finnish natural Gas company, Gasum Oy, has recently taken into use a new control and monitoring system for natural gas pipeline. A special customer service system, developed by Gasum Oy, is closely connected to monitoring system. It provides up-to-date information to all customers of Gasum Oy. The information is layered in three confidential levels: general information, operational data and invoicing information. The system is operating interactively in confidential Extranet. Inside Gasum Oy to meet the needs of departments outside the control room, a new GID system is developed. GID is a way to present pipeline process data and its further modifications with a very user-friendly interface based on geographical map. The system is based on data warehouse architecture and it is working on company's Intranet. This makes it possible to present various secrecy level information based on user ID. Gasum's new SCADA is not only the base for operating the pipeline, but it also provides lot of vital information to other systems serving different user groups within natural gas business in Finland. (authors)

  5. DEVELOPMENT OF CONTROL SYSTEM FOR PROGRESS OF CONSTRUCTION AND INSTALLATION WORKS BASED ON INTEGRATED APPLICATION OF Primavera P6 Professional R8.3.2 AND ArchiCAD 17.0.0 SOFTWARE PRODUCTS

    Directory of Open Access Journals (Sweden)

    V. P. Grakhov

    2017-01-01

    Full Text Available The paper considers application and development of information technologies while carrying out project management in construction. Organizational and technological support of works throughout its life cycle exerts an influence on quality and efficiency of successful implementation of the construction project. In order to achieve the project goal it is necessary perfectly to organize and plan works, distribute roles and responsibilities of the project participants, regulate composition and content of the project documentation. While analyzing technical and economic indices of construction organization activity and management systems operating in these organizations, conclusion has been made that market experience in functioning of operational management systems has not been adequately applied in practice of domestic construction organizations. Thus, introduction of integrated management systems for quality, costs, time parameters pertaining to project construction, their resource support will contribute to improvement of economic situation of construction organizations. The solution consists in application of up-to-date information technologies, maximum implementation of computer systems and programs in the sphere of production, creation of application software. It has been shown that it is necessary to develop a software model that provides a possibility comprehensively to apply information technology tools for monitoring progress of construction and installation works, systematization of information technology application that allow to control key parameters of construction and installation works, improvement of system for providing actual information in project implementation process. An example of complex application of software products Primavera P6 Professional R8.3.2 and ArchiCAD 17.0.0 is given in the paper.

  6. Installation for analytic chemistry under irradiation

    International Nuclear Information System (INIS)

    Fradin, J.; Azoeuf, P.; Guillon, A.

    1966-01-01

    An installation has been set up for carrying out manipulations and chemical analyses on radioactive products. It is completely remote-controlled and is of linear shape, 15 metres long; it is made up of three zones: - an active zone containing the apparatus, - a rear zone giving access to the active zone, - a forward zone independent of the two others and completely protected from which the remote-control of the apparatus is effected. The whole assembly has been designed so that each apparatus corresponding to an analytical technique is set up in a sealed enclosure. The sealed enclosures are interconnected by a conveyor. After three years operation, a critical review is now made of the installation. (authors) [fr

  7. Installation for the study of heat transfer with high flux density; Installation d'etude de transmission de chaleur a densite de flux elevee

    Energy Technology Data Exchange (ETDEWEB)

    Robin, M; Schwab, B [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1957-07-01

    As a result of their very low vapor pressure, metals with a low fusion point (sodium, sodium-potassium alloys, etc.) can be used at high temperature, as heating fluids, in installations whose internal pressure is close to atmospheric pressure. Owing to the very high convection coefficients which can be reached with these fluids and to the large temperature differences utilizable, it is possible to produce through the exchange surfaces considerable heat flux densities, of the order of those which exist through the canning of fuel elements in nuclear reactors. The installation described allowed a flux density of more than 200 W/cm{sup 2} to be obtained, the heating fluid being a Na-K alloy (containing 56 per cent by weight of potassium) brought to a temperature around 550 deg. C. (author) [French] Par suite de leur tres faible pression de vapeur, les metaux a bas point de fusion (sodium, alliages sodium-potassium, etc.) peuvent etre utilises a haute temperature, comme fluides de chauffage, dans des installations dont la pression interne est voisine de la pression atmospherique. Grace aux coefficients de convection tres eleves que ces fluides permettent d'atteindre et aux importantes differences de temperature utilisables, il est possible de produire, a travers les surfaces d'echange, des densites de flux de chaleur considerables, de l'ordre de celles qui existent a travers les gaines des elements combustibles des reacteurs nucleaires. L'installation decrite a permis l'obtention d'une densite de flux de plus, de 200 W/cm{sup 2}, le fluide chauffant etant de l'alliage Na-K (a 56 pour cent en poids de potassium) porte a une temperature voisine de 550 deg. C. (auteur)

  8. Caracterisation environnementale des emissions atmospheriques d'une source fixe et creation d'un outil de gestion dynamique =

    Science.gov (United States)

    Fournier, Marie-Claude

    Une caracterisation des emissions atmospheriques provenant des sources fixes en operation, alimentees au gaz et a l'huile legere, a ete conduite aux installations visees des sites no.1 et no.2. La caracterisation et les calculs theoriques des emissions atmospheriques aux installations des sites no.1 et no.2 presentent des resultats qui sont en dessous des valeurs reglementaires pour des conditions d'operation normales en periode hivernale et par consequent, a de plus fortes demandes energetiques. Ainsi, pour une demande energetique plus basse, le taux de contaminants dans les emissions atmospheriques pourrait egalement etre en dessous des reglementations municipales et provinciales en vigueur. Dans la perspective d'une nouvelle reglementation provinciale, dont les termes sont discutes depuis 2005, il serait souhaitable que le proprietaire des infrastructures visees participe aux echanges avec le Ministere du Developpement Durable, de l'Environnement et des Parcs (MDDEP) du Quebec. En effet, meme si le principe de droit acquis permettrait d'eviter d'etre assujetti a la nouvelle reglementation, l'application de ce type de principe ne s'inscrit pas dans ceux d'un developpement durable. L'âge avance des installations etudiees implique la planification d'un entretien rigoureux afin d'assurer les conditions optimales de combustion en fonction du type de combustible. Des tests de combustion sur une base reguliere sont donc recommandes. Afin de supporter le processus de suivi et d'evaluation de la performance environnementale des sources fixes, un outil d'aide a la gestion de l'information environnementale a ete developpe. Dans ce contexte, la poursuite du developpement d'un outil d'aide a la gestion de l'information environnementale faciliterait non seulement le travail des personnes affectees aux inventaires annuels mais egalement le processus de communication entre les differents acteurs concernes tant intra- qu'inter-etablissement. Cet outil serait egalement un bon

  9. The effluent problem in a plutonium production centre; Probleme des effluents d'un centre de production de plutonium

    Energy Technology Data Exchange (ETDEWEB)

    Galley, R; Cantel, J [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    The first part of the report is devoted to generalities: the geographical situation of the Marcoule Centre, the sources of radio-active effluent, methods of treating this effluent. In the second part the authors gives a detailed description of the various installations in the Radio-active Effluent Treatment Station at the Marcoule Centre, and outline the conditions governing the rejection of treated effluent into the Rhone. A few lines are given to comparisons between the results obtained from the use of these installations up till may 1959 and the expected results published by the same authors at the Brussels Conference (1956). In conclusion the authors lay down some of the essential principles, applicable to the study of new installations. (author) [French] La premiere partie du rapport est consacree a quelques generalites: situation geographique du Centre de Marcoule, provenance des effluents radioactifs, methodes de traitement de ces effluents. Dans la seconde partie, les auteurs presentent une description detaillee des diverses installations de la Station de Traitement des Effluents radioactifs du Centre de Marcoule et precisent les conditions de rejet dans le Rhone des effluents radioactifs traites. Quelques lignes sont consacrees aux comparaisons entre les resultats de l'exploitation des installations jusqu'en mai 1959 et les previsions publiees par les memes auteurs a l'occasion de la Conference de Bruxelles (1956). En conclusion, les auteurs donnent quelques principes essentiels, applicables a l'etude de nouvelles installations. (auteur)

  10. Goal conflicts management in the control and operation of nuclear power plant; La gestion des conflits d'objectifs dans la conduite et l'exploitation d'installations nucleires

    Energy Technology Data Exchange (ETDEWEB)

    Letzkus, P

    2004-11-15

    The goal conflicts constitute classes of situation or behaviors which can be translated, in the human activity, by skirting or variations with the rules...Their consequences can be serious, in particular in nuclear industry. In addition, the analyses of incidents do not make it always possible to integrate complex factors like individual attitudes, organisational or design features which push the operators to take risks to achieve their activity. This research first of all presents indicators which make it possible to go up with the causes of these variations. In the second place, a model of management of the activity illustrates why it is observed that people can adopt strategies or behaviors whose finalities seem to be opposed to the context. For that, it allots to emotional dimension a role of modulator intervening on the cognitive mechanisms managing an operational situation. (author)

  11. Goal conflicts management in the control and operation of nuclear power plant; La gestion des conflits d'objectifs dans la conduite et l'exploitation d'installations nucleires

    Energy Technology Data Exchange (ETDEWEB)

    Letzkus, P

    2004-11-15

    The goal conflicts constitute classes of situation or behaviors which can be translated, in the human activity, by skirting or variations with the rules...Their consequences can be serious, in particular in nuclear industry. In addition, the analyses of incidents do not make it always possible to integrate complex factors like individual attitudes, organisational or design features which push the operators to take risks to achieve their activity. This research first of all presents indicators which make it possible to go up with the causes of these variations. In the second place, a model of management of the activity illustrates why it is observed that people can adopt strategies or behaviors whose finalities seem to be opposed to the context. For that, it allots to emotional dimension a role of modulator intervening on the cognitive mechanisms managing an operational situation. (author)

  12. The use of ligneous plants for controlling the radioactive contamination of a soil; Utilisation des vegetaux ligneux au controle de la pollution radioactive d'un sol

    Energy Technology Data Exchange (ETDEWEB)

    Gagnaire, J; Heuze, C; Aubert, M T [Commissariat a l' Energie Atomique, Grenoble (France).Centre d' Etudes Nucleaires

    1961-07-01

    A method for checking on the possible radioactive pollution of CEN-G. soil, by taking samples of tissue of ligneous plants cultivated on the land in question, is proposed and investigated during the vegetation period. A preliminary study on the retention capacity of the CEN-G. soil for solutions containing {sup 32}P and chemical composition is given. (author) [French] Une methode de controle de la pollution radioactive eventuelle du sol du CEN-G., a l'aide de prelevements de tissus de vegetaux ligneux, cultives sur ce terrain est proposee et etudiee pendant la periode vegetative. Une etude preliminaire du pouvoir de retention du sol du CEN-G, vis-a-vis de solutions contenant du {sup 32}P et de composition chimique, est exposee. (auteur)

  13. Contribution des radios communautaires a l'education des ...

    African Journals Online (AJOL)

    Contribution des radios communautaires a l'education des populations rurales pour un developpement durable au Benin: etude de cas. ... Journal de la Recherche Scientifique de l'Université de Lomé. Journal Home · ABOUT THIS JOURNAL ...

  14. Installing Git under MacOS

    OpenAIRE

    Fitzpatrick, Benjamin

    2015-01-01

    Step by step guide to installing the version control software Git under the Macintosh Operating System MacOS X (and later). Includes a seqeunce of screenshots with hand drawn arrows ;-) These slides are part of the materials for an Introductory course on the R language and environment for statistial computing. Free and Open Source materials for this course hosted on GitHub: https://github.com/brfitzpatrick/Intro_to_R

  15. Solar Installation Labor Market Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Friedman, B.; Jordan, P.; Carrese, J.

    2011-12-01

    The potential economic benefits of the growing renewable energy sector have led to increased federal, state, and local investments in solar industries, including federal grants for expanded workforce training for U.S. solar installers. However, there remain gaps in the data required to understand the size and composition of the workforce needed to meet the demand for solar power. Through primary research on the U.S. solar installation employer base, this report seeks to address that gap, improving policymakers and other solar stakeholders understanding of both the evolving needs of these employers and the economic opportunity associated with solar market development. Included are labor market data covering current U.S. employment, expected industry growth, and employer skill preferences for solar installation-related occupations. This study offers an in-depth look at the solar installation sectors. A study published by the Solar Foundation in October 2011 provides a census of labor data across the entire solar value chain.

  16. Installation of the Gbar LINAC

    CERN Multimedia

    Maximilien, Brice

    2017-01-01

    Installation of the GBAR linac in its shielding bunker. The electrons accelerated to 10 MeV toward a target will produce the positrons that are necessary to form anti hydrogen with the antiprotons coming from the ELENA decelerator.

  17. La convergence des rôles respectifs des relationnistes et des journalistes influence-t-elle la perception qu'ils ont les uns des autres?

    DEFF Research Database (Denmark)

    Valentini, Chiara

    2017-01-01

    la convergence des rôles respectifs des praticiens des relations publiques et des journalistes a un effet favorable sur la perception qu’ils ont les uns des autres. L’effet est plus marqué chez les praticiens des relations publiques, car leur vision de la profession en journalisme correspond à celle...

  18. Nuclear installations and their environment

    International Nuclear Information System (INIS)

    Rieu, Ch.; Berge-Thierry, C.; Duval, C.; Bonnet, Ch.; Gaubert, B.; Riffard, Th.; Greffier, G.; Cervantes, J.C.; Le Breton, F.; Clement, C.; Charbonnier, R.; Andreani, A.M.; Maubert, H.; Maisonneuve, A.

    2002-01-01

    This dossier deals with protection of nuclear installations against external risks. The articles come from the presentations of the Conference on 'Nuclear installations and their environment', held by the 'Safety and Environment Protection' Section of the French Nuclear Energy Society on October 15, 2002. Floods, earthquakes, winter cold, snow-falls, wind, fires are the main natural risks taken into account. Risks from industrial environment and communication lines are also considered. (authors)

  19. Suitcase to Audit Solar Installations

    Energy Technology Data Exchange (ETDEWEB)

    Alberdi, J.; Barcala, J.M.; Blas de, J.; Molinero, A.; Navarrete, J.J.; Yuste, C.

    2001-07-01

    The audit suitcase was proposed by BESEL to introduce in the solar energy market a new tool which can make an evaluation of solar installation efficiency. Non-invasive sensors and low power components permit both easy installation of the devices and data storage for a period as long as ten days. This project was funded by the contract JOR3-CT98-7030 of the European Union JOULE III program. (Author)

  20. Suitcase to Audit Solar Installations

    International Nuclear Information System (INIS)

    Alberdi, J.; Barcala, J. M.; Blas, J. de; Molinero, A.; Navarrete, J. J.; Yuste, C.

    2001-01-01

    The audit suitcase was proposed by BESEL to introduce in the solar energy market a new tool which can make an evaluation of solar installation efficiency. Non-invasive sensors and low power components permit both easy installation of the devices and data storage for a period as long as ten days. This project was funded by the contract JOR3-CT98-7030 of the European Union JOULE III program. (Author)

  1. Promouvoir l'entrepreneuriat inclusif des jeunes et des femmes ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Le projet vise à analyser la contribution réelle et potentielle de l'entrepreneuriat inclusif au bien-être des jeunes et des femmes en Côte d'Ivoire, au Burkina Faso et au Kenya. Après un état des lieux de la pratique de l'entrepreneuriat inclusif dans chacun des pays ciblés, l'équipe de recherche étudiera son incidence sur ...

  2. Contribution of the active control to the measurement of fluid-elastic coupling strengths; Apport du controle actif pour la mesure des forces de couplage fluide-elastique

    Energy Technology Data Exchange (ETDEWEB)

    Legendre, S

    1999-06-30

    A precise dimensioning of the tubes inside a steam generator requires a better knowledge of the fluid-elastic coupling phenomena. The direct method for the determination of fluid-elastic coupling coefficients allows to explore only a reduced range of flow velocities and is unsuitable for the low velocities and for velocities close to the critical instability velocity. The active damping control method has been validated both with air and water and offers the possibility to extend the range of flow velocities using an artificial supply of damping: 50% of increase in single-phase flow conditions with measurements performed beyond the critical instability velocity, a doubling of the explored range of velocities in two-phase flow conditions. For a 25% two-phase flow, a stabilization of the damping of the coupled fluid-structure system is observed beyond the critical instability velocity. Finally, the calculation of fluid-elastic dimensionless coefficients has permitted to show the influence of the reduced velocity on the fluid-elastic coupling in two-phase flow conditions. (J.S.)

  3. Entre ville et campagne, le difficile équilibre des périurbaines lointaines

    Directory of Open Access Journals (Sweden)

    Nathalie Ortar

    2008-09-01

    Full Text Available Le périurbain attire des familles composées de ménages bi-actifs avec des enfants généralement en bas âge au moment de l’installation. Cet éloignement se traduit par des installations dans des zones qui, jusqu’à présent, étaient qualifiées de rurales.L’enquête a révélé la nécessité d’étudier la situation des épouses en raison du caractère récurrent des difficultés dont elles faisaient état pour se maintenir en emploi ou avoir accès à un emploi choisi. Au cours de cet article nous examinons donc la situation professionnelle des femmes résidant dans ces zones, ainsi que les contraintes que posent pour elles les modes de garde proposés dans ces communes de même que leur mobilité géographique quotidienne.Suburbs attract bi-actives households with young children. Those couples are settled farther and farther in the countryside. The investigation brought to light the need to study women’s situation the situation because of the reported difficulties to remain in employment. This article is therefore about women’s work situation, as well as work/life balance.

  4. La fabrique des sciences des institutions aux pratiques

    CERN Document Server

    Benninghoff, Martin; Crettaz von Roten, Fabienne; Merz, Martina

    2006-01-01

    Aujourd'hui, les façons de produire, d'organiser, d'évaluer et d'utiliser les savoirs sont en profond débat. De plus en plus, l'Etat, la société civile et l'économie tentent d'influencer les activités des universités et des laboratoires de recherche. Ces développements mettent à l'épreuve tout à la fois les fondements des systèmes d'enseignement supérieur et de recherche, l'autonomie des institutions scientifiques, la définition des frontières des savoirs et l'acceptation des sciences. Dans des contextes suisses et européens, cet ouvrage s'intéresse aux manières dont les sciences et les technologies sont fabriquées, en analysant leurs institutions et les pratiques. A partir d'une approche relationnelle, les sciences et les technologies sont conçues comme des phénomènes profondément sociaux, culturels et politiques. Une telle démarche déstabilise les visions parfois idéalisées et stéréotypées de la construction des savoirs. Des études de cas détaillées décrivent des phénomè...

  5. Effets des extraits vegetaux sur la dynamique de populations des ...

    African Journals Online (AJOL)

    La présente étude se propose de trouver une alternative de l'utilisation des pesticides chimiques en testant l'effet insecticide des extraits aqueux des feuilles de Hyptis suaveolens, graines de Ricinus communis et de Azadirachta indica contre les ravageurs du niébé en conditions de champ en utilisant le cyperméthrine ...

  6. Integrated system for nuclear installation control

    International Nuclear Information System (INIS)

    Mirchev, M.; Boyiklieva, R.; Peneva, A.

    2008-01-01

    A comparison between the international requirements and standards to an integrated management system is presented. The IAEA GS-R-3, BS PASS 99, ISO 9001, ISO 14001, BS OHSAS 18001 and ISO/IEC 27001 are reviewed and compared by the following aspects: definition and integration of processes; safety culture, risk analyses, satisfaction of the concerned parties, actions in case of discrepancy

  7. Planning and installing photovoltaic systems a guide for installers, architects and engineers

    CERN Document Server

    Deutsche Gesellschaft für Sonnenenergie (DGS)

    2013-01-01

    New third edition of the bestselling manual from the German Solar Energy Society (DGS), showing you the essential steps to plan and install a solar photovoltaic system. With a global focus, it has been updated to include sections on new technology and concepts, new legislation and the current PV market.Updates cover:new developments in inverter and module technologymarket situation worldwide and outlookintegration to the grid (voltage stabilization, frequency, remote control)new legal requirements for installation and planningoperational costs for dismantling and recyclingfeed-in managementnew requirements for fire protectionnew requirements in Europe for electric waste (Waste Electrical and Electronic Equipment, WEEE) and the restriction of the use of certain hazardous substances (RoHS).Also providing information on current developments in system design, economic analysis, operation and maintenance of PV systems, as well as new software tools, hybrid and tracking systems.An essential manual for installers, e...

  8. Charte du Conseil des Gouverneurs

    International Development Research Centre (IDRC) Digital Library (Canada)

    Office 2004 Test Drive User

    7. favoriser des communications ouvertes et franches entre le personnel, la direction ..... de dresser le procès-verbal des réunions du Conseil et de ses comités et de veiller à ce ... et des résultats qu'il obtient, et non de sa gestion quotidienne.

  9. Displacement pile installation effects in sand

    NARCIS (Netherlands)

    Beijer-Lundberg, A.

    2015-01-01

    Installation effects govern the post-installation behaviour of displacement piles in sand. These effects are currently not completely understood. Suitable experimental techniques to model these installation effects include field, laboratory and experimental models. In the current thesis a

  10. Le statut vitaminique des individus et des populations…

    Directory of Open Access Journals (Sweden)

    Icart Jean-Claude

    2000-05-01

    Full Text Available Comme le souligne un récent rapport du Haut comité de santé publique, le statut vitaminique des individus et des populations demeure une question d’actualité. Si les études ne révèlent plus de signes évocateurs de carence, au plus des problèmes de déficiences pour certains groupes à risque, des interrogations, demeurent malgré le contexte d’abondance, concernant la couverture des besoins, laquelle pourrait s’avérer inférieure aux valeurs considérées comme satisfaisantes.

  11. Les lueurs des sables

    CERN Multimedia

    Les lueurs des sables

    2013-01-01

    Two CERN ladies are getting ready for the “Trophée Roses des Sables” rally adventure: Julie and Laetitia are finalizing the last details before setting off on Monday 7th October 2013. Julie from EN-MEF group and Laetitia from DGS-SEE group, met at the CERN Rugby club. This year, they are participating in the 100 % female rally which will take place in Morocco from 10 to 20 October. They will be carrying along 100 kg of humanitarian donation for children such as some clothes, books and medical material. Do not hesitate to show your support at their farewell party to be held on Monday 7 October, from 4 to 6 pm in front of the St Genis-Pouilly Mairie (city Hall). Follow their exciting adventure on the blog leslueursdessables.trophee-roses-des-sables.org and on their association’s Facebook page Les Lueurs des Sables.

  12. Liste des auteurs

    OpenAIRE

    2016-01-01

    Madeleine Akrich      Ecole des Mines – Centre de Sociologie de l’innovation – Paris Noël Barbe      Association comtoise des Arts et Traditions populaires – Besançon Lucien Bernot      Ecole des hautes études en sciences sociales (EHESS) – Paris Anni Borzeix      Centre national de la recherche scientifique (CNRS) –     Groupement d’intérêt public (GIP) « Mutations industrielles » – Paris François Boudarias      Laboratoire d’Anthropologie et de sociologie de Tours (LAST) Dominique Boullier ...

  13. Integrated installation for offshore wind turbines

    Energy Technology Data Exchange (ETDEWEB)

    Way, J.; Bowerman, H.

    2003-07-01

    A project to investigate the feasibility of integrating the offshore installation of foundation, turbine and tower for offshore wind turbines into one operation is described. Three separate objectives are listed. They are: (1) Telescopic tower study - reversible process incorporating lift and lock mechanisms; (2) Transportation study - technical and economic feasibility of transporting and installing a wind turbine unit via a standard barge with minimal conversion and (3) Self-burial system study - to demonstrate the feasibility of self burial of a slab foundation via controlled jetting beneath the slab. The background to the study and the proposed concepts are discussed. The work carried out to date and the costs are reported together with the findings. Recommendations for future work are listed. The work was carried out by Corus UK Ltd and is managed by Future Energy Solutions for the DTI.

  14. Software safety analysis application in installation phase

    International Nuclear Information System (INIS)

    Huang, H. W.; Yih, S.; Wang, L. H.; Liao, B. C.; Lin, J. M.; Kao, T. M.

    2010-01-01

    This work performed a software safety analysis (SSA) in the installation phase of the Lungmen nuclear power plant (LMNPP) in Taiwan, under the cooperation of INER and TPC. The US Nuclear Regulatory Commission (USNRC) requests licensee to perform software safety analysis (SSA) and software verification and validation (SV and V) in each phase of software development life cycle with Branch Technical Position (BTP) 7-14. In this work, 37 safety grade digital instrumentation and control (I and C) systems were analyzed by Failure Mode and Effects Analysis (FMEA), which is suggested by IEEE Standard 7-4.3.2-2003. During the installation phase, skew tests for safety grade network and point to point tests were performed. The FMEA showed all the single failure modes can be resolved by the redundant means. Most of the common mode failures can be resolved by operator manual actions. (authors)

  15. Software safety analysis practice in installation phase

    Energy Technology Data Exchange (ETDEWEB)

    Huang, H. W.; Chen, M. H.; Shyu, S. S., E-mail: hwhwang@iner.gov.t [Institute of Nuclear Energy Research, No. 1000 Wenhua Road, Chiaan Village, Longtan Township, 32546 Taoyuan County, Taiwan (China)

    2010-10-15

    This work performed a software safety analysis in the installation phase of the Lung men nuclear power plant in Taiwan, under the cooperation of Institute of Nuclear Energy Research and Tpc. The US Nuclear Regulatory Commission requests licensee to perform software safety analysis and software verification and validation in each phase of software development life cycle with Branch Technical Position 7-14. In this work, 37 safety grade digital instrumentation and control systems were analyzed by failure mode and effects analysis, which is suggested by IEEE standard 7-4.3.2-2003. During the installation phase, skew tests for safety grade network and point to point tests were performed. The failure mode and effects analysis showed all the single failure modes can be resolved by the redundant means. Most of the common mode failures can be resolved by operator manual actions. (Author)

  16. Software safety analysis practice in installation phase

    International Nuclear Information System (INIS)

    Huang, H. W.; Chen, M. H.; Shyu, S. S.

    2010-10-01

    This work performed a software safety analysis in the installation phase of the Lung men nuclear power plant in Taiwan, under the cooperation of Institute of Nuclear Energy Research and Tpc. The US Nuclear Regulatory Commission requests licensee to perform software safety analysis and software verification and validation in each phase of software development life cycle with Branch Technical Position 7-14. In this work, 37 safety grade digital instrumentation and control systems were analyzed by failure mode and effects analysis, which is suggested by IEEE standard 7-4.3.2-2003. During the installation phase, skew tests for safety grade network and point to point tests were performed. The failure mode and effects analysis showed all the single failure modes can be resolved by the redundant means. Most of the common mode failures can be resolved by operator manual actions. (Author)

  17. Solution for remote handling in accelerator installations

    International Nuclear Information System (INIS)

    Burgerjon, J.J.; Ekberg, E.L.; Grisham, D.L.; Horne, R.A.; Meyer, R.E.; Flatau, C.R.; Wilson, K.B.

    1977-01-01

    A description is given of a remote-handling system designed for the Los Alamos Clinton P. Anderson Meson Physics Facility (LAMPF), versatile enough to be used in a variety of situations found around particle accelerators. The system consists of a bilateral (force-reflecting) servomanipulator installed on an articulated hydraulic boom. The boom also carries the necessary tools and observation devices. The whole slave unit can be moved by crane or truck to the area of operation. A control cable connects the slave unit with the control station, located at a safe distance in a trailer. Various stages of development as well as some operating experience are discussed

  18. Hot water preparation using heat-pumps and loading control on the secondary side. Measurements made on an installation in Uttwil, Switzerland - Final report; Warmwasserbereitung mit Waermepumpe und sekundaerseitiger Laderegelung. Messungen an einer Anlage in Uttwil - Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Hans Mayer, M. [Mayer Ingenieur GmbH, Diessenhofen (Switzerland); Gabathuler, H. R. [Gabathuler Beratung GmbH, Diessenhofen, (Switzerland); Baumgartner, T. [Baumgartner und Partner AG, Rapperswil-Jona (Switzerland)

    2009-06-15

    The object of the project is to prepare basic documentation enabling domestic hot water heating systems to be designed for detached houses, apartment houses, school buildings, swimming pools, hotels, etc. - i.e. installations of any size - using regular commercial heat pumps, heat exchangers and storage tanks, having optimum energy performance and remaining fault-free both in winter and in summer operation. Studies performed in 2007 demonstrated that domestic hot-water temperatures of 54 to 57 {sup o}C could be achieved without auxiliary electrical heating using an external heat exchanger and with step charging, whereby seasonal performance factors of 3.15 to 3.33 were achieved. In the present project, the advantages of anti-legionella circuits with storage control in the secondary circuit are investigated on a test installation in Uttwil (Canton of Thurgau) on the basis of measurement. The measurements were performed using a ground source heat pump with scroll compressor and intermediate steam injection, enabling a maximum condenser exit temperature of 65 {sup o}C to be achieved. The following conclusions were reached in the studies: (i) For installations with normal domestic hot-water consumption (e.g. in residential buildings), cold water strata appear in the lower part of the storage tank. In this case, therefore, step charging in normal operation up to a temperature of about 57 {sup o}C is more advantageous. With this, seasonal performance factors of around 3.33 can be achieved (see 2007 studies). (ii) For installations with only low domestic hot-water consumption, in which the temperature reduction in the storage tank is mainly due to the recirculation system (typical for office buildings), stratified charging is preferable. For a domestic hot-water temperature of 57 {sup o}C, a seasonal performance factor of around 2.6 and for domestic hot-water temperatures above 60 {sup o}C, a seasonal performance factor of 2.5 is more realistic. (iii) The first

  19. Évaluation des pratiques agricoles des légumes feuilles : le cas des ...

    African Journals Online (AJOL)

    Face à ce constat, le défi de la recherche serait la détermination du niveau actuel de contamination des légumes feuilles et des eaux du barrage et celui de l'État serait l'initiation de programmes de sensibilisation des producteurs par rapport à une gestion plus rigoureuse des pesticides. Mots-clés : pratiques paysannes, ...

  20. Etude theorique et experimentale des evaporateurs de dioxyde de carbone operant dans des conditions de givrage

    Science.gov (United States)

    Bendaoud, Adlane Larbi

    . Dans la partie theorique, un modele traitant les aspects thermique, hydrodynamique et massique a ete elabore. Sur la base de ce modele a ete ecrit un programme informatique en langage FORTRAN 6.6. Il est base sur la discretisation du serpentin en volumes de controle, est entierement automatise et peut traiter des echangeurs de chaleur avec des circuits de refrigerant complexes pouvant avoir des entrees et sorties multiples ainsi que des bifurcations. La presence simultanee des trois phases thermodynamiques du refrigerant (liquide sous refroidi, fluide sature, vapeur surchauffee) dans le serpentin est aussi prise en charge. Le modele a ete valide pour un fonctionnement avec et sans formation de givre en utilisant des donnees experimentales disponibles dans la litterature et celles obtenues sur le banc d'essai de CanmetENERGIE. Celui-ci a ete mis a jour pour les besoins de la presente recherche et pour cela, un systeme de surchauffe et d'injection de la vapeur d'eau dans une enceinte a tres basse temperature a ete dimensionne, fabrique et installe. Un dispositif de visualisation de la formation de givre, ainsi qu'un equipement de mesure de la temperature, de la pression et de l'humidite relative de l'air ont aussi ete ajoutes. Une fois le modele valide, des simulations numeriques sur le serpentin avec et sans formation de givre ont ete effectuees. Un premier cas de base a servi comme reference pour d'autres cas pour lesquels une etude parametrique sur la geometrie et le fonctionnement a ete menee. Il a ete montre par rapport au cas de base que : 1. la diminution de la densite des ailettes sur des rangees specifiques du serpentin donne une surface minimale (Amin) plus grande, retardant ainsi l'obstruction totale du serpentin par le givre et permet donc un temps de fonctionnement plus grand et une frequence de degivrage plus faible. 2. une bonne configuration de circuit de refrigerant augmente le temps de fonctionnement du serpentin de 200 % et delivre une puissance