WorldWideScience

Sample records for control systems sistema

  1. Control integral systems; Sistemas integrales de control

    Energy Technology Data Exchange (ETDEWEB)

    Burgos, Estrella [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1999-12-31

    Almost two third of the electric power generation in Mexico are obtained from hydrocarbons, for that reasons Comision Federal de Electricidad (CFE) dedicated special commitment in modernizing the operation of fossil fuel central stations. In attaining this objective the control systems play a fundamental roll, from them depend a good share of the reliability and the efficiency of the electric power generation process, as well as the extension of the equipment useful life. Since 1984 the Instituto de Investigaciones Electricas (IIE) has been working, upon the request of CFE, on the development of digital control systems. To date it has designed and implemented a logic control system for gas burners, which controls 32 burners of the Unit 4 boiler of the Generation Central of Valle de Mexico and two systems for distributed control for two combined cycle central stations, which are: Dos Bocas, Veracruz Combined cycle central, and Gomez Palacio, Durango combined cycle central. With these two developments the IIE enters the World tendency of implementing distributed control systems for the fossil fuel power central update [Espanol] Casi las dos terceras partes de la generacion electrica en Mexico se obtienen a partir de hidrocarburos, es por eso que la Comision Federal de Electricidad (CFE) puso especial empeno en modernizar la operacion de las centrales termoelectricas de combustibles fosiles. En el logro de este objetivo los sistemas de control desempenan un papel fundamental, de ellos depende una buena parte la confiabilidad y la eficiencia en el proceso de generacion de energia electrica, asi como la prolongacion de la vida util de los equipos. Desde 1984 el Instituto de Investigaciones Electricas (IIE) ha trabajado, a solicitud de la CFE, en el desarrollo de sistemas digitales de control. A la fecha se han disenado e implantado un sistema de control logico de quemadores de gas, el cual controla 32 quemadores de la caldera de la unidad 4 de la central de generacion

  2. Control integral systems; Sistemas integrales de control

    Energy Technology Data Exchange (ETDEWEB)

    Burgos, Estrella [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1998-12-31

    Almost two third of the electric power generation in Mexico are obtained from hydrocarbons, for that reasons Comision Federal de Electricidad (CFE) dedicated special commitment in modernizing the operation of fossil fuel central stations. In attaining this objective the control systems play a fundamental roll, from them depend a good share of the reliability and the efficiency of the electric power generation process, as well as the extension of the equipment useful life. Since 1984 the Instituto de Investigaciones Electricas (IIE) has been working, upon the request of CFE, on the development of digital control systems. To date it has designed and implemented a logic control system for gas burners, which controls 32 burners of the Unit 4 boiler of the Generation Central of Valle de Mexico and two systems for distributed control for two combined cycle central stations, which are: Dos Bocas, Veracruz Combined cycle central, and Gomez Palacio, Durango combined cycle central. With these two developments the IIE enters the World tendency of implementing distributed control systems for the fossil fuel power central update [Espanol] Casi las dos terceras partes de la generacion electrica en Mexico se obtienen a partir de hidrocarburos, es por eso que la Comision Federal de Electricidad (CFE) puso especial empeno en modernizar la operacion de las centrales termoelectricas de combustibles fosiles. En el logro de este objetivo los sistemas de control desempenan un papel fundamental, de ellos depende una buena parte la confiabilidad y la eficiencia en el proceso de generacion de energia electrica, asi como la prolongacion de la vida util de los equipos. Desde 1984 el Instituto de Investigaciones Electricas (IIE) ha trabajado, a solicitud de la CFE, en el desarrollo de sistemas digitales de control. A la fecha se han disenado e implantado un sistema de control logico de quemadores de gas, el cual controla 32 quemadores de la caldera de la unidad 4 de la central de generacion

  3. Lighting systems control; El control en los sistemas de iluminacion

    Energy Technology Data Exchange (ETDEWEB)

    Arriaga Alpizar, Eric [Instituto Politecnico Nacional (Mexico)]. E-mail: eric_aa@hotmail.com

    2006-04-15

    In any workplace the illumination systems are very important, nevertheless, it is essential to control them in order to save energy. This article presents the six following control strategies for the efficient electric power use: programming, lights only will be on when it is necessary; natural light use, illumination will be replaced by using sunlight; lumens level maintenance, average level illumination can be measured utilizing this method; adjustment, the lowest illumination average is required avoiding to affect the performance and adaptation-compensation, decreasing the system variation. In addition there are also control devices which will operate the system, such as automatic devices, presence sensors and photo sensors. [Spanish] Los sistemas de iluminacion son muy importantes en cualquier lugar de trabajo, no obstante, es necesario que tengan un control, para lograr ahorrar energia. Este articulo presenta seis estrategias de control para el uso eficiente de la energia electrica: la programacion, con esta medida solo se encenderia la luz cuando sea necesario; uso de luz natural, asi se puede prescindir de la iluminacion pues la luz solar cumple con su funcion; mantenimiento del nivel de lumenes, de esta manera se mantiene un nivel promedio de iluminacion; ajuste, se ocupa el nivel de luz mas bajo posible sin afectar el rendimiento y adaptacion-compensacion, reduce la variacion del sistema. Por otro lado tambien hay dispositivos de control, que haran el trabajo, tales como dispositivos automaticos, sensores de presencia y fotosensores.

  4. Intelligent tutorial system for selftraining in tuning of control systems; Sistema tutorial inteligente para el autoentrenamiento en sintonizacion de sistemas de control

    Energy Technology Data Exchange (ETDEWEB)

    Romero Jimenez, Guillermo; Perez Ocampo, Maria Concepcion [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

    1999-07-01

    In this paper the design, development and validation of an intelligent tutorial system oriented to the instruction of techniques of tuning of control systems is described. This system is based on systems previously developed in the Simulation Unit of the Instituto de Investigaciones Electricas (IIE). The designed system accounts with four modules: of knowledge, the student model, of tutor and of interface, basic characteristics that allows to locate this system in the context of the intelligent tutorial systems. In this system in particular, the knowledge module was only modified, because advantage is taken of the existing structure to incorporate a new dominion of application: the one of the techniques of tuning of control systems. The system maintains the characteristic that it can also be used as a consultation system. In addition to the design and validation of the tutorial system, when following the methodology of processing the degree of generality of the developed system, was evaluated, taking into account the evaluation and quantification of metrics that the engineering software proposes. [Spanish] En este trabajo se describen el diseno, el desarrollo y la validacion de un sistema tutorial inteligente orientado a la instruccion de tecnicas de sintonizacion de sistemas de control. Este sistema esta basado en sistemas desarrollados anteriormente en la Unidad de Simulacion del Instituto de Investigaciones Electricas (IIE). El sistema disenado cuenta con cuatro modulos: de conocimiento, del modelo del estudiante, de tutor y de interfaz, caracteristica principal que permite ubicar a este sistema en el contexto de los sistemas tutoriales inteligentes. En este sistema en particular solo se modifica el modulo de conocimiento, pues se aprovecha la estructura existente para incorporar un nuevo dominio de aplicacion: el de las tecnicas de sintonizacion de sistemas de control. El sistema mantiene la caracteristica de que tambien puede utilizarse como un sistema de

  5. Slug control system; Sistema de controle de golfadas

    Energy Technology Data Exchange (ETDEWEB)

    Borges Filho, Alvaro de Miranda; Meira, Marco Antonio Alves de; Vaz, Celio Eduardo Martins [PETROBRAS, Macae, RJ (Brazil). Unidade de Negocios da Bacia de Campos

    2004-07-01

    Due to the characteristics of flow, gas can separate from oil in the pipelines and risers that link subsea manifolds to production offshore platforms, forming liquid and gas slugs in the production separator. Liquid slugs can cause overflow in the separators. Gas slugs can cause burning in the flare due to the limitation in the turbo-compressors acceleration. In both cases the consequences are loss of production or shut-downs. This paper presents a Slug Control System designed to attenuate severe gas and liquid flow variations. The system consist of a control valve installed in the separator inlet, transmitters, a controller, control algorithm and a monitoring station. This system is operating since October 2003 in a production offshore platform, in Campus Basin, Brazil, with excellent results, reducing the gas burning in 45% without oil production loss. (author)

  6. Research, development and technological innovation of wind turbine control systems; Investigacion, desarrollo e innovacion tecnologica de sistemas de control de aerogeneradores

    Energy Technology Data Exchange (ETDEWEB)

    Garduno Ramirez, Raul; Rodriguez Martinez, Arnulfo Antelmo; Sanchez Parra, Marino; Martinez Morales, Miguel Angel; Hernandez Cuellar, Maria Aurora; Alcaide Godinez, Indira Xochiquetzal; Re Lopez, Victor Genaro; Hernandez Gonzalez, Roberto [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2012-07-01

    Control systems constitute the brain and the nervous system of modern machines, such as wind turbine generators (TGE by its acronym in Spanish). TGEs can work efficiently, safely and almost autonomously, thanks to the control systems with which they are equipped. Conversely, any malfunctioning of the control system may cause failure or damage of a component, a subsystem or even destruction of the TGE itself. This paper introduces some basic facts about generation of electric power from wind energy in the world and Mexico, wind turbogenerators and their most relevant technologies, TGE control systems, and R and TD+I about TGE control systems performed at the Instituto de Investigaciones Electricas. [Spanish] Los sistemas de control constituyen el cerebro y el sistema nervioso de las maquinas modernas, como aerogeneradores (AG). Los AG pueden trabajar eficiente, segura y casi autonomamente, gracias a los sistemas de control con los que estan equipados. De manera inversa, cualquier mal funcionamiento del sistema de control puede provocar falla o dano de un componente, subsistema o incluso la destruccion del propio AG. Este documento introduce algunos hechos basicos en torno a la generacion de energia electrica a partir de energia eolica en el mundo y Mexico, los aerogeneradores y sus tecnologias mas importantes, sistemas de control de AG e I+DT alrededor de los sistemas de control de AG realizados en el Instituto de Investigaciones Electricas.

  7. Observation and control system of the thermohydraulic assays laboratory; Sistema de observacion y control del laboratorio de ensayos termohidraulicos

    Energy Technology Data Exchange (ETDEWEB)

    Santome, D; Hualde, R

    1991-12-31

    The Thermohydraulic Assays Laboratory (L.E.T.) is an installation whose purpose will be the components testing and the CAREM-25 reactor thermohydraulic processes operation dynamics. This plant is located at Pilcaniyeu, province of Rio Negro. Part of the tests which will be carried out consist in the use of different control strategies. The control of the systems by digital processors (control by software) has been decided to proceed with a maximum flexibility and capacity to make changes in the algorithms. This work describes the design and implementation of a digital control system to command the three circuits of the installation. (Author). [Espanol] El Laboratorio de Ensayos Termohidraulicos (L.E.T.) es una instalacion cuyo objeto sera el ensayo de componentes y de la dinamica de operacion de los procesos termohidraulicos del reactor CAREM-25. Esta planta esta localizada en Pilcaniyeu, provincia de Rio Negro. Parte de las pruebas que se efectuaran en el L.E.T. consisten en el empleo de distintas estrategias de control. Para disponer de una maxima flexibilidad y capacidad de efectuar cambios en los algoritmos, se decidio realizar el control de los sistemas por medio de procesadores digitales (control por software). Este trabajo consistio en el diseno e implementacion de un sistema de control digital distribuido para el comando de los tres circuitos con que cuenta la instalacion. (Autor).

  8. Supervisory fussy control for an electric generating hybrid system; Control supervisorio difuso para un sistema hibrido de generacion electrica

    Energy Technology Data Exchange (ETDEWEB)

    Lagunas Mendoza, Javier

    2004-11-15

    the fuzzy supervisory controller were compared with a conventional controller. The results shows that the supervisory controller fulfills the three main objectives of the system operation: I) to reduce the fuel consumption of the back-up system, II) to reduce the depth of the discharge of the battery bank, and III) to keep fully charged the battery bank as much as possible in order to make a better use of the available free renewable energy sources. [Spanish] En este trabajo se presenta el desarrollo de un controlador supervisorio difuso para un sistema hibrido de generacion electrica (SHGE). En este trabajo se definio la configuracion y los elementos que componen el SHGE a utilizar, producto de la revision de configuraciones de sistemas hibridos propuestas actualmente. La configuracion del SHGE incluye: arreglos fotovoltaicos y aerogeneradores como fuentes de generacion renovable, una maquina de combustion interna como sistema de respaldo, un banco de baterias como medio de almacenamiento de energia, cargas electricas en corriente alterna y un inversor CD/CA para poder alimentarlas. Tambien a partir de la configuracion propuesta se buscaron y seleccionaron los modelos matematicos de los diferentes elementos del sistema. Se llevo a cabo la validacion de los modelos a traves de la comparacion de la salida contra datos reales obtenidos en un SHGE instalado en Pachuca. Con los modelos se llevo a cabo el desarrollo de un programa de simulacion para un SHGE en Matlab. Se determino la funcion principal del controlador supervisorio dentro del SHGE. La funcion es satisfacer el o los objetivos de operacion del sistema. La filosofia de operacion del controlador supervisorio se definio a partir de la configuracion electrica propuesta y de los objetivos de operacion del sistema. Por lo que respecta al desarrollo del controlador supervisorio, se llevo a cabo una revision de los controladores supervisorios actuales que utilizan alguna tecnica de control inteligente. A partir de

  9. Control system for solar tracking based on artificial vision; Sistema de control para seguimiento solar basado en vision artificial

    Energy Technology Data Exchange (ETDEWEB)

    Pacheco Ramirez, Jesus Horacio; Anaya Perez, Maria Elena; Benitez Baltazar, Victor Hugo [Universidad de onora, Hermosillo, Sonora (Mexico)]. E-mail: jpacheco@industrial.uson.mx; meanaya@industrial.uson.mx; vbenitez@industrial.uson.mx

    2010-11-15

    This work shows how artificial vision feedback can be applied to control systems. The control is applied to a solar panel in order to track the sun position. The algorithms to calculate the position of the sun and the image processing are developed in LabView. The responses obtained from the control show that it is possible to use vision for a control scheme in closed loop. [Spanish] El presente trabajo muestra la manera en la cual un sistema de control puede ser retroalimentado mediante vision artificial. El control es aplicado en un panel solar para realizar el seguimiento del sol a lo largo del dia. Los algoritmos para calcular la posicion del sol y para el tratamiento de la imagen fueron desarrollados en LabView. Las respuestas obtenidas del control muestran que es posible utilizar vision para un esquema de control en lazo cerrado.

  10. Sistemas Silvipastoris Silvipastoral Systems

    Directory of Open Access Journals (Sweden)

    Fernando Salgado Bernardino

    2010-02-01

    Full Text Available

    Apesar das pesquisas com sistemas silvipastoris terem sido iniciadas no final da década de 1970, as informações geradas até hoje não são em grande número. As vantagens advindas de um sistema silvipastoril são inúmeras e devidamente reconhecidas. Pelo fato de ser uma técnica de uso da terra capaz de recuperar ecossistemas alterados pelo mau manejo, estes sistemas, pela integração de atividades agrícolas, pecuárias e silviculturais, passam a representar uma tecnologia que confere maior sustentabilidade que os sistemas tradicionais, nos quais os monocultivos são predominantes. Nos últimos anos, instituições de ensino, pesquisa e extensão do País têm se voltado para o desenvolvimento de tais sistemas. O governo de Minas Gerais, por meio de sua Secretaria de Estado de Agricultura e de órgãos vinculados, vem promovendo a condução de modelos agrossilvipastoris num processo integrado de ocupação do solo, denominado lavoura-pecuária-silvicultura. Apesar dos grandes avanços no conhecimento de culturas anuais e dos componentes arbóreos, principalmente o eucalipto, e de gramíneas forrageiras tolerantes à diminuição da intensidade luminosa, ainda é necessário se comnhecer melhor o manejo do sub-bosque sob os efeitos do pastejo.

     

    doi: 10.4336/2009.pfb.60.77

    Although researches related to silvopastoral systems have been initiated many years ago in Brazil, there are few informations generated until now. The advantages from a silvopastoral system are inumerous and well recognized. By the fact of being a technique of land using capable of recovering several disturbed ecosystems, the silvopastoral systems by the integration of agricultural, cattle, and silvicultural activities represent a technology that can achieve higher sustainability than the traditional systems as the monocultures. Today, research centers in Brazil dedicate great attention to agrossilvopastoral systems. The government of Minas Gerais

  11. Modelo de control y vigilancia en sanidad ambiental basados en sistemas de autocontrol Control and surveillance in environment health based on self-control systems

    Directory of Open Access Journals (Sweden)

    Loreto Santa Marina Rodríguez

    2006-12-01

    Full Text Available En el ámbito ambiental el control de los riesgos para la salud está experimentando cambios importantes en lo referente a su concepción y a la forma de gestión de los mismos desde lo servicios de salud pública. Tradicionalmente la Administración Sanitaria ha asumido el papel de garante de las condiciones higiénico-sanitarias de las instalaciones, estableciendo sistemas de control y vigilancia. La tendencia actual es que sean los responsables directos de las instalaciones los que valoren los riesgos de las mismas, establezcan sistemas de control y vigilancia, pasando la Administración Sanitaria a ser el organismo que apruebe y supervise dichos sistemas.The control of environmental health risks is undergoing significant changes with regard to the way these risks are understood and managed by the public health services. Traditionally, the Health Administration has taken on responsibility for guaranteeing the hygienic-sanitary conditions of installations, establishing control and monitoring systems. Nowadays it is the people in charge of the installations who assess their risks and implement control and monitoring systems, while the Health Administration confines itself to approving and supervising such systems.

  12. Supervisory control for hybrid systems of electrical generation based on fuzzy logic; Control supervisorio para sistemas hibridos de generacion electrica basado en logica difusa

    Energy Technology Data Exchange (ETDEWEB)

    Lagunas M, Javier; Ortega S, Cesar [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Caratozzolo M, Patricia [Instituto Tecnologico de Estudios Superiores de Monterrey, campus Cd. de Mexico (Mexico)

    2005-07-01

    The development and integration of hybrid systems of electrical generation (SHGE) of small capacity: The intention of these developments is its implementation in isolated or far away communities from conventional electric networks, that contribute in the own productive processes of these towns. As part of these work a system of control for their hybrid system wind-photovoltaic- internal combustion machine was developed that operates nowadays in a system installed in Pachuca, Hidalgo, Mexico. However, in the two past years, the GENC has worked, altogether with the Management of Control and Instrumentation of the Instituto de Investigaciones Electricas (IIE) and the Centro Nacional de Investigacion y Desarrollo Tecnologico (CENIDET) (National Center of Research and Technological Development), to incorporate an intelligent control technique in the regulation of the hybrid systems of wind-photovoltaic-machine of internal combustion type. Lemos de Pereira rises that the main problems of the present technology of the SHGE are related to the control and supervision of the power systems. The system that is in charge of the actions of load control and dispatch is denominated supervisory control. This controller supervises the operation of all the components, regulates the entry or exiting of operation of the generation systems, as well as the loads. [Spanish] El desarrollo e integracion de sistemas hibridos de generacion electrica (SHGE) de pequena capacidad. El proposito de estos desarrollos es su implementacion en comunidades aisladas o alejadas de la red electrica convencional, las cuales contribuyan en los procesos productivos propios de estos poblados. Como parte de dichos trabajos se desarrollo un sistema de control para su sistema hibrido eolico-fotovoltaico-maquina de combustion interna que opera actualmente en un sistema instalado en Pachuca, Hidalgo, Mexico. Ahora bien, en los dos ultimos anos, la GENC ha trabajado, en conjunto con la Gerencia de Control e

  13. Sistemas de controle administrativo no Franchising: aliando controle e flexibilidade estratégica Administrative control systems in Franchising: combining control and strategic flexibility

    Directory of Open Access Journals (Sweden)

    Maria Lúcia Simas Paulino

    2011-03-01

    Full Text Available O presente estudo objetivou verificar como o franqueador alia controle e flexibilidade estratégica, identificando os sistemas de controle que utiliza para monitorar, mensurar, avaliar incertezas, validar estratégias, promover mudanças, fazer emergir iniciativas estratégicas e contribuir com o aprendizado da rede, tendo em vista a melhoria contínua da posição competitiva da franquia. O referencial teórico teve como suporte o relacionamento entre franqueador e franqueado proposto na literatura, os custos de transação, a teoria de agência e os sistemas de controle administrativo definidos e categorizados por Simons (1994. Visando o cumprimento do objetivo proposto, utilizou-se a pesquisa do tipo exploratória e a estratégia de estudo de caso único tendo como unidade de análise a área de Marketing e Vendas de uma franqueadora. O instrumento de coleta de dados foi a entrevista semi-estruturada realizada com 4 executivos da área, escolhidos em razão dos temas pesquisados. Através da identificação dos sistemas de controle interativo utilizados pela franqueadora, verificou-se que ela agrega na administração estratégica da franquia, as abordagens gerenciais de minimização de custos e maximização de oportunidades, aliando controle e flexibilidade estratégica.This study aimed to verify how the franchisor combines control and strategic flexibility, identifying control systems it uses to monitor, measure, assess uncertainty, validate strategies, promote change, strategic initiatives to emerge and contribute to the learning network in order continuous improvement of the competitive position of the franchise. The theoretical framework was to support the relationship between franchiser and franchisee proposed in the literature, transaction costs, the agency theory and management control systems defined and categorized by Simons (1994. To fulfill the objective proposed, we used the exploratory research and the strategy of a single

  14. Core flow control system for field applications; Sistema de controle de core-flow

    Energy Technology Data Exchange (ETDEWEB)

    Granzotto, Desiree G.; Adachi, Vanessa Y.; Bannwart, Antonio C.; Moura, Luiz F.M. [Universidade Estadual de Campinas (UNICAMP), SP (Brazil); Sassim, Natache S.D.A. [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Centro de Estudo do Petroleo (CEPETRO); Carvalho, Carlos H.M. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

    2008-07-01

    The significant heavy oil reserves worldwide and the presently high crude oil prices make it essential the development of technologies for heavy oil production and transportation. Heavy oils, with their inherent features of high viscosity (100- 10,000 cP) and density (below 20 deg API) require specific techniques to make it viable their flow in pipes at high flow rates. One of the simplest methods, which do not require use of heat or diluents, is provided by oil-water annular flow (core-flow). Among the still unsolved issues regarding core-flow is the two-phase flow control in order to avoid abrupt increases in the pressure drop due to the possible occurrence of bad water-lubricated points, and thus obtain a safe operation of the line at the lowest possible water-oil ratio. This work presents results of core flow tests which allow designing a control system for the inlet pressure of the line, by actuating on the water flow rate at a fixed oil flow rate. With the circuit model and the specified controller, simulations can be done to assess its performance. The experiments were run at core-flow circuit of LABPETRO-UNICAMP. (author)

  15. Robust control decentralized by sliding ways of electrical of power multi-machines systems; Control robusto descentralizado por modos deslizantes de sistemas electricos de potencia multimaquinas

    Energy Technology Data Exchange (ETDEWEB)

    Huerta Avila, Hector

    2008-09-15

    This work deals with the problem of robust decentralized control of multimachine electric power systems. These systems are subject to different perturbations, such as short circuits, connection and/or disconnection of loads, lines generators, mechanical torque variations, etc. Then, it is necessary controllers which guarantee robustness under those perturbations to provide electrical energy to the loads with admissible stability margins. Moreover, the controller must be robust under parametric variations due to model uncertainties, and other physical reasons. The electrical power systems are modeled as complex great scale nonlinear systems. Then, the controller design is a challenging problem. Thus, the decentralized control schemes enable to avoid these problems. This work proposes three novel robust nonlinear techniques. The first one is based on the block control and integral sliding modes. The second obtains a sliding manifold from the Hamiltonian model of a nonlinear system to use this manifold in the integral sliding modes. The third technique enables to apply the sliding mode technique to a nonlinear block controllable system, by using Lyapunov function in each block. Then, four control schemes for electric power systems are designed. The four control schemes are robust under the perturbations of electric power systems mentioned above. The controllers proposed can be implemented in any electric power system with n generators, m lines and k loads. [Spanish] Este trabajo esta dedicado al diseno de esquemas de control robustos descentralizados que sean capaces de responder satisfactoriamente en sistemas electricos de potencia multimaquinas. Estos sistemas estan sujetos a perturbaciones de diferentes tipos, como cortos circuitos, entrada y salida de lineas de cargas o de generadores. Es evidente la necesidad de controladores que puedan rechazar estas perturbaciones para proveer energia de calidad y sin interrupciones a todos los usuarios conectados a la red

  16. Control de un sistema eólico-fotovoltaico utilizando un controlador fuzzy; Control of a wind-photovoltaic system using a controller fuzzy

    Directory of Open Access Journals (Sweden)

    Alfredo G M Gámez López

    2011-02-01

    Full Text Available En este artículo, se prueba de manera virtual, un controlador basado en lógica difusa para un sistema híbrido degeneración de energía. La simulación digital emplea como herramienta el Labview, obteniéndose resultadosgráficos descriptivos de la acción del controlador, así como la interfaz gráfica representativa del comportamientodel sistema. In this article is tested a virtual controller using fuzzy logic for a hybrid system of power generation.LABVIEW is used as a digital simulation tool obtaining descriptive graphical results of the action of the driveras well as a graphical interface of the behavior of the system.

  17. Sistemas de control en estructuras

    Directory of Open Access Journals (Sweden)

    José Luis Ahumada Villafañe

    2010-01-01

    Full Text Available En el diseño estructural, la capacidad de disipación de energía en elementos que conforman los sistemas resistentes a fuerzas dinámicas, como las impartidas por la actividad sísmica y eólica, es suministrada por un minucioso detallado del acero de refuerzo y dimensiones en las secciones transversales de los elementos. Esta práctica es realizada bajo muchas suposiciones que en algunas ocasiones no corresponden a la realidad, y como es de esperarse, producen resultados inexactos y un desconocimiento del desempeño de la estructura. Por lo anterior es riesgoso confiar el 100% de la capacidad estructural a los elementos sobre todo cuando conforman sistemas estructurales diseñados en zonas de amenaza sísmica alta. En este artículo se presentan los sistemas de control, los cuales son una serie de dispositivos adaptados a las estructuras que absorben gran parte de la energía sísmica y liberan los elementos estructurales en gran porcentaje de la acción sísmica, logrando disminuir en ellas las solicitaciones (fuerzas internas y las respuestas (derivas con el objetivo de conseguir un buen desempeño, limitar el daño y abaratar los costos de reparación de fallas localizadas. Los sistemas de control que se analizarán en el presente artículo se dividen en control pasivo, control activo, control semiactivo y control híbrido.

  18. System for management and control for enterprises (SACE); Sistema de acompanhamento e controle de empreendimentos (SACE)

    Energy Technology Data Exchange (ETDEWEB)

    Dillenburg, Juliano A.; Carvalho, Moises O. de [PETROBRAS, Rio de Janeiro, RJ (Brazil); Osso Junior, Joao A. [Avanti Prima Engenharia Ltda., Rio de Janeiro, RJ (Brazil)

    2005-07-01

    This article describes the main characteristics of the system SACE. SACE was developed as a result of the discussion in the Pipeline community of PETROBRAS' Engineering. Its main purpose is to enhance the administration process and inspection in lineal projects (Pipeline), as well as in sites away from the administration office. SACE unites integration, standardization of formats, reliability in data registration and communication, enhancing the administration and inspection of Contracts, as well as new projects' cost and schedule estimates. The system is also transparent and user friendly. SACE principle is the division and reduction of registration and data processing work. Documents and processes are totally chained, guaranteeing traceability and safety for managerial documents. The reliability of information generated by the system structure improves decision-making process, making it faster and more reliable. (author)

  19. Energy management system. Opti-dmaX Control; Sistema de administracion de energia. Control Opti-dmaX

    Energy Technology Data Exchange (ETDEWEB)

    Automatizacion, Productividad y Calidad S.A. de C.V. Puebla (Mexico)

    2005-07-01

    The electrical energy is an essential element in the activities of the present world. Optimizing its consumption represents a competitive advantage for the companies, since the operation costs would be reduced as well as the negative impact to the environment. In billing the electrical energy the tariffs consider: the consumption, the demand, the power and the schedule of use for the medium and large companies. With the Opti-dmaX system the necessary information for the correct administration of the electrical energy consumption is obtained from the measurement in the strategic points of the installation. At the same time, the processes and services are controlled, maintaining an efficient power operation that diminishes operative costs. [Spanish] La energia electrica es un elemento indispensable en las actividades del mundo actual, y optimizar su consumo, representa una ventaja competitiva para las empresas, ya que se consigue reducir los costos de operacion y el impacto al ambiente. En la facturacion de la energia electrica las tarifas consideran: el consumo, la demanda, la potencia y el horario de uso para las medianas y grandes empresas. Con el sistema Opti-dmaX se obtiene la informacion necesaria para la correcta administracion del consumo de energia electrica a partir de la medicion en los puntos estrategicos de la instalacion. A su vez, se controlan los procesos y servicios, manteniendo una operacion energetica eficiente que minimiza los costos operativos.

  20. Modeling and simulation of the generation automatic control of electric power systems; Modelado y simulacion del control automatico de generacion de sistemas electricos de potencia

    Energy Technology Data Exchange (ETDEWEB)

    Caballero Ortiz, Ezequiel

    2002-12-01

    This work is devoted to the analysis of the Automatic Control of Electrical Systems Generation of power, as of the information that generates the loop with Load-Frequency Control and the Automatic Voltage Regulator loop. To accomplish the analysis, the control classical theory and feedback control systems concepts are applied. Thus also, the modern theory concepts are employed. The studies are accomplished in the digital computer through the MATLAB program and the available simulation technique in the SIMULINK tool. In this thesis the theoretical and physical concepts of the automatic control of generation are established; dividing it in load frequency control and automatic voltage regulator loops. The mathematical models of the two control loops are established. Later, the models of the elements are interconnected in order to integrate the loop with load frequency control and the digital simulation of the system is carried out. In first instance, the function of the primary control in are - machine, area - multi machine and multi area - multi machine power systems, is analyzed. Then, the automatic control of generation of the area and multi area power systems is studied. The economic dispatch concept is established and with this plan the power system multi area is simulated, there in after the energy exchange among areas in stationary stage is studied. The mathematical models of the component elements of the control loop of the automatic voltage regulator are interconnected. Data according to the nature of each component are generated and their behavior is simulated to analyze the system response. The two control loops are interconnected and a simulation is carry out with data generated previously, examining the performance of the automatic control of generation and the interaction between the two control loops. Finally, the Poles Positioning and the Optimum Control techniques of the modern control theory are applied to the automatic control of an area generation

  1. System for studies of control strategies applied in the refrigerated chambers Sistema para estudos de estratégias de controle aplicadas em câmaras frias

    Directory of Open Access Journals (Sweden)

    Alexandre Tizzei

    2011-10-01

    Full Text Available The process of cold storage chambers contributes largely to the quality and longevity of stored products. In recent years, it has been intensified the study of control strategies in order to decrease the temperature change inside the storage chamber and to reduce the electric power consumption. This study has developed a system for data acquisition and process control, in LabVIEW language, to be applied in the cooling system of a refrigerating chamber of 30m³. The use of instrumentation and the application developed fostered the development of scientific experiments, which aimed to study the dynamic behavior of the refrigeration system, compare the performance of control strategies and the heat engine, even due to the controlled temperature, or to the electricity consumption. This system tested the strategies for on-off control, PID and fuzzy. Regarding power consumption, the fuzzy controller showed the best result, saving 10% when compared with other tested strategies.O processo de armazenamento refrigerado em câmaras contribui, em grande parte, para a qualidade e a longevidade dos produtos. Nos últimos anos, têm-se intensificado os estudos de estratégias de controle com a finalidade de diminuir a variação da temperatura dentro da câmara de armazenamento e de reduzir o consumo de energia elétrica. Neste trabalho, foi desenvolvido um sistema para aquisição de dados e controle do processo, em linguagem LabVIEW, para ser aplicado no sistema de refrigeração de uma câmara frigorífica de 30m³. A utilização da instrumentação e do aplicativo desenvolvido possibilitou a realização de experimentos científicos, com o objetivo de estudar o comportamento dinâmico do sistema de refrigeração, comparar o desempenho das estratégias de controle da máquina térmica, tanto em função da temperatura controlada, quanto ao consumo de energia elétrica. Neste sistema, foram testadas as estratégias de controle liga-desliga, PID e fuzzy. Em

  2. Gas management of measurement system; Sistema informatizado de programacao e controle integrado de gas natural

    Energy Technology Data Exchange (ETDEWEB)

    Niedersberg, Luis Carlos [Companhia de Gas do Estado do Rio Grande do Sul (Sulgas), Porto Alegre, RS (Brazil). Coordenacao de Programacao e Controle Integrado; Gomes, Lea Visali [Companhia de Gas do Estado do Rio Grande do Sul (Sulgas), Porto Alegre, RS (Brazil). Gerencia Executiva de Logistica de Operacoes

    2008-07-01

    This paper has for objective to present the software developed for control of measurement of natural gas in the Gas Company of the Rio Grande do Sul State - Sulgas. This paper will be presented the previous control system, developed as Microsoft Excel and the new system developed in Company's ERP. This software automated great part of the process, reducing possible mistakes, reducing the reverse-work index and improving the quality of the measurements considerably and of the revenue of the Company. (author)

  3. Sistemas de controle administrativo no Franchising: aliando controle e flexibilidade estratégica Administrative control systems in Franchising: combining control and strategic flexibility

    OpenAIRE

    Maria Lúcia Simas Paulino

    2011-01-01

    O presente estudo objetivou verificar como o franqueador alia controle e flexibilidade estratégica, identificando os sistemas de controle que utiliza para monitorar, mensurar, avaliar incertezas, validar estratégias, promover mudanças, fazer emergir iniciativas estratégicas e contribuir com o aprendizado da rede, tendo em vista a melhoria contínua da posição competitiva da franquia. O referencial teórico teve como suporte o relacionamento entre franqueador e franqueado proposto na literatura,...

  4. Análise do desempenho de sistema de controle de processos com reciclo = Performance analysis of the control system of recycle processes

    Directory of Open Access Journals (Sweden)

    Luiz Mário de Matos Jorge

    2008-01-01

    Full Text Available A necessidade de economia de energia, as leis ambientais e a qualidade dos produtos tem exigido processos mais integrados. Uma forma de integração de processos é via reciclo de massa. Neste trabalho, objetivou-se a investigação da influência do reciclo demassa, no desempenho de diferentes estruturas de sistemas de controle e a sua relação com indicadores de controlabilidade e resiliência. Conclui-se que o reciclo e a estrutura influenciam no desempenho do sistema de controle e que esta influência pode ser previstapor indicadores de controlabilidade e resiliência.The need for greater energy savings, stringent environmental laws and product quality have all demanded better process integration. One path for process integration is through the mass recycle process. The objective of this study is to investigate the influence of mass recycle in the performance of different control system structures, and its relation with controllability and resiliency indicators. We conclude that both recycle and structure influence in theperformance of the control system, and this influence can be foreseen by controllability and resiliency indicators.

  5. Control systems and strategic alignment: proposition of indicators Sistemas de controle e alinhamento estratégico: proposição de indicadores

    Directory of Open Access Journals (Sweden)

    Elói Júnior Damke

    2011-10-01

    Full Text Available Normal 0 21 false false false PT-BR X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabela normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The control system and strategic alignment Control Levers proposed by Simons (1995 permits, from the conception of variables balance, to consider about aspects temporally distant and evaluate effects and causes, as well as appreciate practical and theoretical aspects. Despite the relevance of this model, there were no studies that show a way to operationalize it, making its measurement in organizations possible. Thus, this theoretical essay aims to provide, based on the Levers of Control Simons (1995, a set of strategic control indicators which allows one to assess the levels at which each control mechanism (belief system, boundary system, diagnostic system and interactive system is configured in organizations. Intending to obtain grants for the development of indicators, we turned to the work of Simons (1995, through which it was possible to incorporate concepts and comments from the author about the levers of control. It is hoped, through the operationalization of these strategic control mechanisms, to contribute to the knowledge field. Now, as a managerial contribution, it is intended to provide an alignment tool and support to the organizations strategy, through the

  6. Integrated system for management and control of energetical distribution; Sistema integrado de gestion y control de la red de distribucion

    Energy Technology Data Exchange (ETDEWEB)

    Hidalgo Vega, V.; Flores Canales, J.M.; Moreno Morales, J. [Sainco (Spain)

    1995-08-01

    This article presents the integrated system of management and control in the distribution network. This system permits to improve the energetical demand management. The automatized system has 4 functions. (1) Telecontrol of the network; (2) Management of the energy supplies; (3) Energetic control and user management; (4) Big corporative systems.

  7. Sistemas de aplicação e inseticidas no controle de Anticarsia gemmatalis na soja Application systems and insecticides to control Anticarsia gemmatalis in soybean

    Directory of Open Access Journals (Sweden)

    Jerson V. C. Guedes

    2012-08-01

    Full Text Available Normalmente, a aplicação de inseticidas para o controle de Anticarsia gemmatalis na cultura da soja é realizada com bicos hidráulicos. Dentre outras possibilidades se destacam a assistência de ar junto à barra de pulverização e a aplicação de baixo volume oleoso por atomizadores rotativos de discos. Em um experimento realizado na cultura da soja, na safra 2009/10, avaliou-se a eficiência de controle de A. gemmatalis utilizando-se sistemas de aplicação e inseticidas. O delineamento utilizado foi bifatorial com o fator A constituído por sistemas de aplicação, sendo: A1 - pulverização com atomizadores rotativos de discos; A2 - pulverização com bicos hidráulicos; A3 - pulverização com assistência de ar e o fator D, constituído por inseticidas, sendo: D1 - Cipermetrina e D2 - Lufenurom + profenofós. Não houve interação do inseticida com o sistema de aplicação; além disso, a mistura de inseticidas Lufenurom + Profenofós apresentou efeito residual superior a Cipermetrina. O sistema de aplicação baixo volume oleoso com atomizadores rotativos de discos e o sistema de bicos hidráulicos com assistência de ar junto à barra de pulverização são mais eficientes que a pulverização com bicos hidráulicos no controle de Anticarsia gemmatalis na cultura da soja.The application of insecticides to control Anticarsia gemmatalis in soybean is through hydraulic nozzles. Among the innovations stands out the air-assisted boom sprayer and the application of low oil volume by a rotary discs atomizer. In an experiment conducted with soybean during the 2009/2010 growing season, the control efficiency of A. gemmatalis using application systems and insecticides was assessed. The experimental design was a two-factor, with the factor A being the application systems, as follows: A1 - spraying with rotary discs atomizer; A2 - spraying with hydraulic nozzles and A3 - spraying with air-assistance; and factor D was composed of insecticides

  8. Strategy and technologies for the air pollution active control: The MONIQA system; Estrategia y tecnologias para el control activo de la contaminacion del aire: El sistema MONIQA

    Energy Technology Data Exchange (ETDEWEB)

    Sozzi, Roberto; Favaron, Maurizio [Servizi Territorio, Cinisello Balsamo, (Italy)

    1996-12-31

    What all the environmental laws of the various nations manifest is to permit a harmonic economical development without creating problems to the environment. This paper states that in order to achieve the former it is needed first to know the air pollution, second, the understanding of the transport phenomena and the dispersion of the pollutants in the air, and third the air pollution control. To confront in an effective manner the air pollution problems it is proposed the use of the MONIQA System. This system will aid the designer, the authorities and the population to respond to their questions in a fast and quick manner [Espanol] Lo que expresan todas las leyes ambientales de las diferentes naciones es permitir un desarrollo economico armonico sin crear problemas al medio ambiente. Esta ponencia propone que para lograr lo anterior es necesario primero el conocimiento de la contaminacion atmosferica, segundo la comprension de los fenomenos del transporte y de la dispersion de los contaminantes en el aire y tercero, el control de la contaminacion del aire. Para confrontar de manera eficaz los problemas de contaminacion atmosferica se propone el uso del sistema MONIQA. Este sistema ayudara a los proyectistas, autoridades y a la poblacion a responder sus preguntas de manera rapida y veloz

  9. Strategy and technologies for the air pollution active control: The MONIQA system; Estrategia y tecnologias para el control activo de la contaminacion del aire: El sistema MONIQA

    Energy Technology Data Exchange (ETDEWEB)

    Sozzi, Roberto; Favaron, Maurizio [Servizi Territorio, Cinisello Balsamo, (Italy)

    1997-12-31

    What all the environmental laws of the various nations manifest is to permit a harmonic economical development without creating problems to the environment. This paper states that in order to achieve the former it is needed first to know the air pollution, second, the understanding of the transport phenomena and the dispersion of the pollutants in the air, and third the air pollution control. To confront in an effective manner the air pollution problems it is proposed the use of the MONIQA System. This system will aid the designer, the authorities and the population to respond to their questions in a fast and quick manner [Espanol] Lo que expresan todas las leyes ambientales de las diferentes naciones es permitir un desarrollo economico armonico sin crear problemas al medio ambiente. Esta ponencia propone que para lograr lo anterior es necesario primero el conocimiento de la contaminacion atmosferica, segundo la comprension de los fenomenos del transporte y de la dispersion de los contaminantes en el aire y tercero, el control de la contaminacion del aire. Para confrontar de manera eficaz los problemas de contaminacion atmosferica se propone el uso del sistema MONIQA. Este sistema ayudara a los proyectistas, autoridades y a la poblacion a responder sus preguntas de manera rapida y veloz

  10. Fuel oil heating process and viscosity control system based on PI controllers; Proceso de calentamiento de combustoleo y sistema de control de viscosidad en base a controladores PI

    Energy Technology Data Exchange (ETDEWEB)

    Delgadillo Valencia, Miguel Angel; Dominguez Molina, Beatriz Adriana [Gerencia de Control e Instrumentacionn Instituto de Investigaciones Eletricas, Cuernavaca, Morelos (Mexico)]. E-mail: madv@iie.org.mx; ingbty@hotmail.com

    2010-11-15

    This job presents a mathematical development for evaluating the fuel oil viscosity from direct pressure drop measurement data in a piece of tube, the density of the oil and the oil flow at the main heater input of a conventional power plant. A group of curves obtained from different type of oils are presented in equation form which are used to interpolate the actual oil and to extend it to evaluate the corresponding temperature for the goal viscosity. This temperature is used as temperature setpoint for the proposed viscosity control system. A conventional plant main heater model is developed in order to carry out simulation tests for the viscosity control. Simulation tests are done in the Simulink of Matlab platform and graphs of runs are presented. [Spanish] Este trabajo presenta un desarrollo matematico para la evaluacion de la viscosidad del combustoleo a partir de datos de medicion directa de caida de presion en un tramo de tuberia, de la densidad y del flujo de combustible a la entrada del calentador principal de una central termoelectrica convencional. A traves de datos de diferentes tipos de combustible se presentaron un conjunto de curvas, representadas por ecuaciones, mediante las cuales se interpola la curva correspondiente al combustible actual y se proyecta para evaluar la temperatura correspondiente a la viscosidad objetivo; esta temperatura objetivo se utiliza despues como senal de punto de ajuste para el control de la viscosidad del combustible en un sistema de control propuesto. Para la realizacion de pruebas del control de viscosidad, se plantea el desarrollo del modelo del calentador principal de la central termoelectrica. Las corridas de simulacion se realizan en la plataforma de Simulink de Matlab y se presentan las graficas de dichas corridas.

  11. Evaluation and tuning of control algorithms for power system stabilizers; Evaluacion y sintonizacion de algoritmos de control para el estabilizador de sistemas de potencia

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez Gonzalez, Miguel

    1998-08-01

    A procedure based on the phase compensation technique for tuning satisfactorily lead-lag power system stabilizers (PSS) is presented in this work. This procedure can be applied to standard models of PSS`s (with two phase compensation stages) where rotor speed deviation or an equivalent rotor speed signal is used as input. An analysis of several state of the art advanced control schemes is also presented, which are proposed for overcoming the limitations of conventional fixed parameters PSS`s. The advantages and drawbacks in designing certain types of PSS`s which are based on adaptive control, fuzzy logic and neural networks techniques are investigated. Based on this study, and taking into account the highly complex and non-linear nature of power systems, a fuzzy logic PSS is designed. In order to have good damping characteristics, speed deviation ({Delta}{omega}) of a machine and its acceleration ({Delta}{omega}) are chosen as the input signals to the fuzzy stabilizer of that particular machine. The performance of the lead-lag PSS and fuzzy stabilizer are validated through the simulation of two case studies: a single machine-infinite bus system, and a multimachine power system. All simulations were performed using a tool based on algorithms developed in MATLAB for the study of power system stability. [Espanol] Se presenta un procedimiento basado en la tecnica de compensacion de fase para ajustar en forma satisfactoria los parametros de los estabilizadores de sistemas de potencia (ESP) del tipo de adelanto-atraso. Este procedimiento es aplicable a modelos estandar de ESP`s (con dos redes de compensacion de fase) que utilizan como senal de entrada la velocidad del rotor del generador en cuestion, o una senal de velocidad equivalente. Por otra parte, se realiza un estudio de diversos esquemas de control avanzado del ESP que se proponen en la literatura actual para superar las limitantes de los estabilizadores convencionales. Basicamente, se analizan las ventajas y

  12. Artificial intelligence utilization in power generation units control systems; Utilizacao de inteligencia artificial em sistemas de controle de unidades geradoras

    Energy Technology Data Exchange (ETDEWEB)

    Souza, G N [CEPEL, Rio de Janeiro, RJ (Brazil); Mendes, S B [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia

    1992-12-31

    To the implementation of the logics of control in a hydroelectric power plant artificial languages or complexes formalisms are used which cause error introduction in the description process of such logic. This work suggests the use of an intelligent and interactive system with interface in natural language to the control description as a solution to this problem. 28 refs., 3 figs.

  13. Artificial intelligence utilization in power generation units control systems; Utilizacao de inteligencia artificial em sistemas de controle de unidades geradoras

    Energy Technology Data Exchange (ETDEWEB)

    Souza, G.N. [CEPEL, Rio de Janeiro, RJ (Brazil); Mendes, S.B. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia

    1991-12-31

    To the implementation of the logics of control in a hydroelectric power plant artificial languages or complexes formalisms are used which cause error introduction in the description process of such logic. This work suggests the use of an intelligent and interactive system with interface in natural language to the control description as a solution to this problem. 28 refs., 3 figs.

  14. System calibration for air control of radioactive gases [contamination control]; Kalibracija sistema za kontrolu vazduha na radioaktivne gasove

    Energy Technology Data Exchange (ETDEWEB)

    Zecevic, V; Milosevic, M [Institute of Nuclear Sciences Boris Kidric, Reaktor RA, Vinca, Beograd (Serbia and Montenegro)

    1963-02-15

    Testing of the system for air contamination control at the RA reactor was done and calibrated by Ar{sup 41}. This report contains the report on testing and calibration. This activity was necessary in order to achieve its performance with existing dosimetry system in the RA reactor building.

  15. Automatic system of tests for control equipment in combined cycle power stations; Sistema automatico de pruebas para equipos de control en centrales de ciclo combinado

    Energy Technology Data Exchange (ETDEWEB)

    Martinez M, Miguel A; Flores L, Zenon; Delgadillo V, Miguel A; Gutierrez A, Ruben [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2001-07-01

    This article deals on the Automatic System of Tests, denominated PROBADOR, used by the Gerencia de Control e Instrumentation (GCI) of the Instituto de Investigaciones Electricas (IIE)for the accomplishment of dynamic tests in laboratory, to the systems of acquisition and control developed with the electronic line SAC-IIE that are installed in the Thermoelectric Power station of Combined Cycle (CTCC) of Dos Bocas, Veracruz and Gomez Palacio, Durango, Mexico. Also the architecture, the functions that are carried out in the equipment of the System of Acquisition and control (SAC) and in the personal computer (PC) that conforms it are described, as well as the methodology used for the development of the tests. The PC constitutes Interface Man-Machine (IMM) and in the SAC equipment the simulation of the processes is made (by means of the execution of algebraic-differential equations) in the compressor, combustion chamber, gas turbine, heat recuperators, steam turbines and condenser equipment that integrate a CTCC. The equations that are used are based in the thermodynamics, flow dynamics and heat transfer; they become attached to the real process with a margin of error that is estimated in 10%. Finally, the tendencies of the PROBADOR and the technical and economic advantages are described that it has provided for the improvement in the performance of the control systems, before different situations, with no need to have the real process. [Spanish] Este articulo versa sobre el Sistema Automatico de Pruebas, denominado PROBADOR, utilizado por la Gerencia de Control e Instrumentacion (GCI) del Instituto de Investigaciones Electricas para la realizacion de pruebas dinamicas en laboratorio, a los sistemas de adquisicion y control desarrollado con la linea electronica SAC-IIE que estan instalados en las Centrales Termoelectricas de Ciclo Combinado (CTCC) de Dos Bocas, Veracruz y Gomez Palacio, Durango, Mexico. Tambien se describen la arquitectura, las funciones que se llevan

  16. DCS (Digital Control System) application of three generations; Aplicacao de um SDCD (Sistemas Digitais de Controle Distribuido) de tres geracoes

    Energy Technology Data Exchange (ETDEWEB)

    Coelho, Celso Roberto Molinaro [PETROBRAS S.A., Sao Jose dos Campos, SP (Brazil). Refinaria Henrique Lage (REVAP)

    2004-07-01

    Digital Control System are three generations of hardware and software platforms in process automation , but DCS is using the same functions and presents the reliability and availability . The challenge in automation has to maintain the old and the newest system operating and integrated perhaps the different times of platforms to guarantee the actual investments and in the future. A new generation of DCS using field equipment to control or the actual architecture with a lot of new information are coming with the technologies. (author)

  17. Modernization of control system using the digital control system; Modernizacion de sistemas de control usando la simulacion como herramiento de ingenieria

    Energy Technology Data Exchange (ETDEWEB)

    Carrasco, J. A.; Fernandez, L.; Jimenez, A.

    2002-07-01

    Nowadays, all plant automation tendencies are based on the use of Digital Control System. In big industrial plants the control systems employed are Distributed Control Systems (DCS). The addition of these systems in nuclear power plants,implies an important adaptation process, because most of them were installed using analog control systems. This paper presents the objectives and the first results obtained, in a modernization project, focused in obtaining an engineering platform for making test and analysis of changes prior to their implementation in a nuclear plant. Modernization, Upgrade, DCS, Automation, Simulation, Training. (Author)

  18. DABASCO Experiment Data Acquisition and Control System; Sistema de Toma de Datos y Control del Experimento DABASCO

    Energy Technology Data Exchange (ETDEWEB)

    Alberdi, J.; Artigao, A.; Barcala, J. M.; Oller, J. C. [Ciemat, Madrid (Spain)

    2000-07-01

    DABASCO experiment wants to study the thermohydraulic phenomena produced into the containment area for a severe accident in a nuclear power facility. This document describes the characteristics of the data acquisition and control system used in the experiment. The main elements of the system were a data acquisition board, PCI-MIO-16E-4, and an application written with LaB View. (Author) 5 refs.

  19. System control model of a turbine for a BWR; Modelo del sistema de control de una turbina para un BWR

    Energy Technology Data Exchange (ETDEWEB)

    Vargas O, Y. [Universidad del Valle de Mexico, Campus Toluca, Av. Las Palmas No. 136, Col. San Jorge Pueblo Nuevo, 52140 Metepec, Estado de Mexico (Mexico); Amador G, R.; Ortiz V, J.; Castillo D, R.; Delfin L, A. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)], e-mail: rodolfo.amador@inin.gob.mx

    2009-10-15

    In this work is presented a design of a control system of a turbine for a nuclear power plant with a BWR like energy source. The model seeks to implement later on at thermal hydraulics code of better estimate RELAP/SCDAPSIM. The model is developed for control and protection of turbine, and the consequent protection to the BWR, considering that the turbine control could be employed for one or several turbines in series. The quality of present designs of control pattern of turbine it is that it considers the parameters more important in the operation of a turbine besides that is has incorporated at control the secondary parameters that will be activated originally as true when the turbine model is substituted by a model more detailed. The development of control model of a turbine will be good in short and medium term to realize analysis about the operation of turbine with different operation conditions, of vapor extraction specific steps of turbine to feed other equipment s, besides analyzing the separate effect and integrated effect. (Author)

  20. Control system for forced-air cooling of horticultural products Sistema de controle para o resfriamento com ar forçado de produtos hortícolas

    Directory of Open Access Journals (Sweden)

    João C. T. R. da Silva

    2011-01-01

    Full Text Available This work is a study of the implementation of a classical controller using a tuning method referred to as IMC (Internal Model Control and aimed at the reduction of electrical energy consumption by the appropriate relation between energy consumption and the cooling time with forced air. The supervisory system installed was able to manipulate the variable of frequency of the signal power of the exhaust fan engine (forced air module, to accelerate or decelerate the loss of heat from the product to be cooled by airflow variation that passes through the mass of the produce. The results demonstrated a reduction in energy consumption from 64% and an increase of only 8% in the cooling time to the system using PI/IMC (Proportional - Integral with IMC tuning method compared with the system in its operating nominal condition. This PI/IMC control may be implemented directly in a frequency converter, without the need to purchase a computer or PLC (programmable logic controller to run the dedicated application, increasing its economical viability.Este trabalho consiste no estudo da implementação de um controlador clássico utilizando o método de sintonia denominado por Controle de Modelo Interno, visando à redução do consumo de energia elétrica que decorra na adequada relação entre este consumo e o tempo de resfriamento do processo de resfriamento com ar forçado de produtos hortícolas. Para isto, o sistema supervisório instalado manipulou a variável de frequência do sinal de alimentação do motor de indução trifásico do exaustor (módulo de ar forçado, para acelerar ou desacelerar a perda de calor do produto a ser resfriado por intermédio da variação da vazão de ar que perpassava a massa deste produto. Obteve-se como resultado uma redução no consumo de energia elétrica de 64% e um acréscimo de apenas 8% no tempo de resfriamento para o sistema utilizando um controle proporcional e integral associado ao método de sintonia promovido

  1. Sistema de controle de velocidade sincronizada entre dois veículos agrícolas Synchronized speed control system between two agricultural vehicles

    Directory of Open Access Journals (Sweden)

    Rodrigo Fernando Galzerano Baldo

    2012-02-01

    Full Text Available Este trabalho apresenta uma proposta para o controle automático de velocidade entre dois veículos que necessitam trafegar em paralelo durante operações agrícolas. É descrito o desenvolvimento e os testes de campo de um sistema de controle de velocidade para um trator escravo baseado na velocidade de um trator mestre, utilizando um controlador desenvolvido em lógica fuzzy. Para esses testes, os tratores foram instrumentados com GPS, encoder, computador e transmissor de radiofrequência, sendo instalado ainda no trator escravo um motor de passo para o controle da velocidade de deslocamento. Para avaliar o sistema, realizaram-se dois testes: no primeiro, a resposta do trator escravo à variação de velocidade foi avaliada a partir de simulações de variação na velocidade de entrada; no segundo, foram utilizados dois tratores variando a velocidade do trator mestre e observando a resposta do trator escravo. No primeiro teste, o trator escravo acompanhou a simulação da variação da velocidade com um erro quadrático médio (EQM não significativo e erro médio percentual (EMP máximo de 1,3%. No segundo teste, o trator escravo acompanhou a variação de velocidade do trator mestre com o (EMP de deslocamento variando em módulo de 0,2% a 2,9%.This paper presents a proposal for automatic speed control of vehicles that requires working in synchronism with each other during agricultural operations. It describes the development and field tests of a control system for a slave tractor based on the master tractor speed, using a fuzzy controller. For the tests the master tractor was instrumented with GPS, encoders, computer and radio transmitter. The slave tractor was instrumented in the same way, and included also a stepper motor to act on the tractor throttle. To evaluate the system two tests were conducted. In the first, the master tractor speed was simulated using only the slave tractor. In the second test, two tractors were used varying the

  2. Cogeneration Systems; Sistemas de Cogeneracion

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez M, Manuel F; Huante P, Liborio; Romo M, Cesar A [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2006-07-01

    The present article deals on relevant aspects on the subject of cogeneration within the Mexican territorial limits. In the first place it is presented the role of Mexico in terms of its cogeneration potential, the type of service that has obtained from this predominant modality of cogeneration for self-supplying, the most propitious sectors to develop it, its legislations on the matter, the projects made for the implementation of cogeneration plants, as well as the existing cogeneration schemes for its respective optimization proposals. Without leaving out the analysis on the different types of evaluation on the efficiency of cogeneration systems and the aspects to consider for the election of a generation cycle. [Spanish] El presente articulo trata sobre aspectos relevantes en materia de cogeneracion dentro de los limites territoriales de la nacion mexicana. Se muestra en primer lugar el papel de Mexico en terminos de su potencial de cogeneracion, el tipo de servicio que ha obtenido de esta predominantemente (modalidad de cogeneracion para autoabastecimiento), los sectores mas propicios para desarrollarla, sus legislaciones al respecto, los proyectos realizados para la implementacion de plantas de cogeneracion, asi como los esquemas de cogeneracion existentes con sus respectivas propuestas de optimizacion. Sin dejar de lado el analisis sobre los distintos tipos de evaluacion de la eficiencia de sistemas de cogeneracion y los aspectos a considerar para la eleccion de un ciclo de generacion.

  3. Modeling and control of an electric power generation hybrid system; Modelado y control de un sistema hibrido de generacion de energia electrica

    Energy Technology Data Exchange (ETDEWEB)

    Martinez Guzman, D; Aguilar Mejia, O; Tapia Olvera, R; Santiago Tepantlan, C. [Universidad Politecnica de Tulancingo, Huapalcalco, Hidalgo (Mexico)]. E-mail: omar.aguilar@upt.edu.mx

    2013-03-15

    With growing concerns on energy subject, the development of renewable energy sources is becoming more attractive. This paper presents the output power control of a wind energy conversion system based on a permanent magnet synchronous generator. The currents from voltage source inverter are controlled in a synchronous orthogonal dqo frame using a decoupled feed-forward control. Based on extensive simulation results using MATLAB/SIMULINK, it has been established that the performance of the controllers both in transient as well as in steady state is quite satisfactory. [Spanish] Con la creciente preocupacion en materia de energia, el desarrollo de fuentes de energia renovables es cada vez mas atractivo. Este trabajo presenta la regulacion de la potencia de salida de un sistema de generacion eolica basado en un generador sincrono de imanes permanentes. Las corrientes de la fuente inversora de voltaje son controladas en un marco de referencia ortogonal dqo usando un compensador por retroalimentacion en adelanto. Las simulaciones realizadas en MATLAB / Simulink, demuestran que los controladores presentan un excelente desempeno en estado transitorio, asi como en estado estacionario.

  4. Monitoring and control system for the charging of batteries in photovoltaic applications; Sistema para monitorizar y controlar la carga de baterias en aplicaciones fotovoltaicas

    Energy Technology Data Exchange (ETDEWEB)

    Ortega S, Cesar A; Pacheco A, Maria Jojutla; Orozco V, Jaime A; Cristin V, Miguel A [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2004-07-01

    The appropriate monitoring and control of the charging of lead-acid (LAB) batteries is an increasing necessity in an industry that demands systems with low maintenance costs and high availability. The problem of extending the batteries useful life becomes more complex when the batteries are charged through photovoltaic panels. The purpose of the present article is to offer the description of the system for monitoring and control for the charging of batteries developed at the Instituto de Investigaciones Electricas (IIE). This system performs a continuous monitoring of the charging state of the battery and of the main operation parameters. With the extracted information of the data, the fine tuning algorithm control can be made. The data are acquired in a personal computer through a serial connection. Once stored, they are presented to the user in a graphical way so that they can be analyzed. [Spanish] El adecuado monitoreo y control de carga de baterias plomo-acido (BPA) es una necesidad creciente en una industria que demanda sistemas con bajos costos de mantenimiento y alta disponibilidad. El problema de extender la vida util de las baterias se vuelve mas complejo cuando las baterias son cargadas a traves de paneles fotovoltaicos. La intencion del presente articulo es ofrecer la descripcion del sistema para monitoreo y control de carga de baterias desarrollado en el Instituto de Investigaciones Electricas (IIE). Este sistema realiza un monitoreo continuo del estado de carga de la bateria y de los principales parametros de operacion. Con la informacion extraida de los datos, se puede hacer la sintonizacion fina del algoritmo de control. Los datos se adquieren en una computadora personal a traves de un enlace serial. Una vez almacenados, se presentan al usuario de manera grafica para que puedan ser analizados.

  5. Sistema de controle interno ambiental: estudo realizado em um hospital público = System of internal control environment: study done in a public hospital

    Directory of Open Access Journals (Sweden)

    Danúbia Vegini

    2012-05-01

    Full Text Available As preocupações com o meio ambiente estão assumindo proporções cada vez maiores, em decorrência dos desequilíbrios gerados pelos homens na natureza. Com isso, a administração pública está adotando políticas mais específicas e concretas, responsabilizando os agentes pelos seus atos. Como meio de garantir resultados positivos para o meio ambiente, as instituições passaram a adotar ações de controles internos, de gestão ambiental, e sistemas de gestão ambiental. O objetivo deste trabalho é analisar a sustentabilidade ambiental através da aplicação parcial do SICOGEA – geração 2. A metodologia adotada é descritiva e exploratória em relação aos objetivos; quanto aos procedimentos adota-se pesquisa bibliográfica e análise dos resultados, este aplicado em um hospital público utilizando-se de uma entrevista semi-estruturada. A trajetória metodológica divide-se em três fases; sendo, a primeira fundamentação teórica onde são estudados os temas: sistema de controles internos, gestão e certificação ambiental, controladoria, auditoria, contabilidade ambiental, sistema de gestão ambiental e resíduos hospitalares. A segunda fase abrange a análise dos resultados, onde primeiramente fez-se um breve histórico da instituição pesquisada, após realiza-se as entrevistas com base na lista de verificação; e finalmente a terceira fase apresenta o diagnóstico dos resultados, a sustentabilidade parcial e total, bem como o planejamento 5W2H. Assim, em decorrência da pesquisa alcançou-se uma sustentabilidade global da instituição em 2011 de 61,01%, a organização é classificada com resultado “Bom” conforme tabela de avaliação da sustentabilidade e desempenho ambiental, tendo uma queda de 4,45% em relação ao exercício anterior.Concerns about the environment are taking greater and greater, due to the imbalances created by man in nature. With this, the government is adopting policies that are more specific

  6. Administration and maintenance of distributed control digital systems; Administracion y mantenimiento de sistemas digitales de control distribuido (SDCD)

    Energy Technology Data Exchange (ETDEWEB)

    Ferreiro, Jorge M. [Administracion Nacional de Combustibles Alcohol y Portland (ANCAP), Montevideo (Uruguay)

    1998-07-01

    The demand for increased competitiveness has produced a growing presence of Distributed Control Systems (DCS) in the industrial environment. Regardless of size and function, all DCSs have in common very high availability and reliability requirements, and significant hardware, software and configuration complexity. The persons in charge of DCS management and maintenance are thus faced with a task of great responsibility and complexity, with little support in the form of voluminous, complex, non methodological documentation. This work aims to help these persons by giving them advice taken from real-life DCS management experience. As an initial framework, concepts on availability, fault tolerance, modularity, redundancy and maintainability are introduced. Then a DCS maintenance methodology is presented: teamwork, attitude, how to carry on routine work and how to face emergencies. Advice is given on how to develop maintenance procedures based on DCS maintenance tools, with an emphasis on using the DCS event and performance information for predictive maintenance. An overview of DCS hardware and software configuration management. (author)

  7. Fuzzy control for the operation of an electrical energy generation system based on standard fuel cells PEM; Control difuso para la operacion de un sistema de generacion de energia electrica basado en celdas de combustible tipo PEM

    Energy Technology Data Exchange (ETDEWEB)

    Vazquez R, Miguel; Gutierrez A, Ruben [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Rodriguez P, Alejandro [Centro Nacional de Investigacion y Desarrollo Tecnologico (Cenidet), Cuernavaca, Morelos (Mexico)

    2005-07-01

    Fuel cells, as totally clean power plants, have many applications in the industry in general, in the transport system, in the electricity generation for domestic consumption and in the communication systems, among others. When developing new forms of generation with renewable energy sources, it must be considered that petroleum will stop in being an available power resource. The interest in the study of the fuel cells has been increased in the last years because it is considered a solution to the supply of distributed energy problem. Therefore, already exist research institutions that are developing work on this technology. A generation of electrical energy system based on fuel cells is a nonlinear system where the control of the variables of the process, such as the temperature of the system and the pressurization of the reactants, are an important aspect for its proper operation, since it influences in the water balance and therefore in the global efficiency of the system. [Spanish] Las celdas de combustible, como fuente de energia totalmente limpia, tienen muchas aplicaciones en la industria en general: en el sistema de transporte, en la generacion de electricidad para consumo domestico y en los sistemas de comunicacion, entre otros. Al desarrollar nuevas formas de generacion con fuentes de energia renovables, se debe considerar que el petroleo dejara de ser un recurso energetico disponible. El interes en el estudio de las celdas de combustible se ha incrementado en los ultimos anos debido a que se le considera una solucion al problema de abasto de energia distribuida. Por lo tanto, ya existen instituciones de investigacion que estan desarrollando trabajos sobre esta tecnologia. Un sistema de generacion de energia electrica basado en celdas de combustible es un sistema no lineal en donde el control de las variables del proceso, tales como la temperatura del sistema y la presurizacion de los reactantes, es un aspecto importante para su buen funcionamiento, ya que

  8. Sistema de informações para acompanhamento, controle e auditoria em saúde pública Information system for tracking, control and audit in public health

    Directory of Open Access Journals (Sweden)

    Giovanna S. F. Cerchiari

    2008-10-01

    Full Text Available Este artigo apresenta alternativas para a gestão dos recursos destinados à saúde pública, por meio de um sistema de informações para os programas de diabetes e hipertensão e resulta do interesse em analisar a efetividade dos programas destinados aos portadores de doenças crônico-degenerativas. As questões analisadas foram focadas em fatores que traduzem a efetividade das ações desenvolvidas, isto é, a capacidade de gerar resultados a partir dos investimentos feitos. Isso ocorreu por meio de um modelo proposto para análise do resultado, mediante o estabelecimento de um indicador que consolidou três frentes de resultado, o número de óbitos, internações e atendimentos ambulatoriais. O índice estabelecido para análise da efetividade derivou em um indicador de custos. Como percurso metodológico foi aplicado o modelo teórico de planejamento e controle de produção (PCP elaborado por Erdmann (1998, que considera sete etapas para a consolidação de informações fragmentadas em um sistema.This article presents alternatives to the management of resources destined for public health through an information system for diabetes and hypertension programs. It intends to analyze the effectiveness of the programs focused on chronic and degenerative disease porters. The questions analyzed were centered on factors that translated the developed actions effectiveness, that is, the capacity to get results through investments you have made. We used a model to investigate the results, intervening in the establishment of an indicator that consolidated three fronts of results, the number of deaths, hospitalizations and ambulatory appointments. The established index for effectiveness analysis resulted in a cost indicator. As a methodology we used a theoretical model of Production Control and Plan (PCP, elaborated by Erdmann (1998, which considered seven stages for a consolidation of a fragmented information system.

  9. Controlled environment laboratory for the energy certification of refrigeration and air conditioning systems; Laboratorio de ambiente controlado para la certificacion energetica de sistemas de refrigeracion y aire acondicionado

    Energy Technology Data Exchange (ETDEWEB)

    Ambriz, Juan Jose; Romero Paredes, Hernando; Dorantes, Ruben [Universidad Autonoma Metropolitana, Mexico, D.F. (Mexico)

    1999-07-01

    In this paper the general characteristics of the Controlled Environment Laboratory (CELAB) are described and some of the possible tests that could be performed in this device to evaluate the energy efficiency in air conditioning systems, domestic refrigeration and industrial refrigeration, as well as tests to evaluate the hydrothermal comfort in national populations, are presented. [Spanish] En este trabajo se describen las caracteristicas generales del Laboratorio de Ambiente Controlado (LAB), y se presentan algunas de las posibles pruebas que podran ser desarrolladas en este dispositivo para evaluar la eficiencia energetica en sistemas de aire acondicionado, refrigeracion domestica y refrigeracion industrial, asi como para pruebas para evaluar el confort hidrotermico en poblaciones nacionales.

  10. Sistema de servocontrol visual empleando redes neuronales y filtros en el dominio de CIELAB//Visual servo-control system using neural networks and filters based on CIELAB

    Directory of Open Access Journals (Sweden)

    Germán Buitrago Salazar

    2015-05-01

    Full Text Available En este trabajo se presentan los resultados de un sistema servocontrol visual de un brazo robótico de seis grados de libertad. Para esto, se utiliza una red neuronal de tipo feed forward, entrenada por back propagation, para determinar la distancia entre el brazo robótico y un objeto de referencia, que permite ubicarlo en un espacio de trabajo. Las entradas de la red corresponden a la información obtenida de las imágenes capturadas por el Kinect, utilizando un filtro que discrimina la posición de los elementos, en el espacio de color CIELAB (Commission Internationale de l'Eclairage L*a*b components. El resultado de esta investigación demostró que la distancia estimada por la red tiene un margen de error menor, que el algoritmo propuesto en otros trabajos. Igualmente, se probó que el sistema de procesamiento de imágenes es más robusto a ruidos digitales, en comparación con los sistemas que utilizan filtros en el dominio RGB (Red-Green-Blue.Palabras claves: sistema de servocontrol visual, CIELAB, redes neuronales, filtrado de imágenes.______________________________________________________________________________AbstractIn this paper the results of visual servo-control system for a robotic arm with six degrees of freedom are presented. For this purpose, a feed fordward neural network, which was trained by back propagation, is used to determine the distance between the robot arm and a reference object and sitting the robot in the workspace. The inputs of neural network correspond to the information obtained from the images captured by the Kinect, using a filter that discriminates the position of the elements in the CIELAB (Commission Internationale de l'Eclairage L*a*bcomponents color space. The result of this research showed that the estimated distance with the network has an errorless than the algorithm proposed in other works. Similarly, it was proved that the image processing system is more robust to digital noise, compared to

  11. Systems of aerial spraying for soybean rust control Sistemas de pulverização aérea para controle curativo da ferrugem da soja

    Directory of Open Access Journals (Sweden)

    Ulisses R. Antuniassi

    2011-01-01

    Full Text Available The soybean rust caused by Phakopsora pachyrhizi is considered the main soybean disease and consequently the appropriate selection and the use of spraying equipment are vital for its control. The aim of this study was to evaluate the performance of aerial application equipment for soybean rust control. It was used: Micronair AU 5000 at 10 L ha-1 (with oil and at 20 L ha-1 (without oil; Stol ARD atomizer at 10 and 20 L ha-1 (both with oil and Spectrum (electrostatic at 10 L ha-1 (without oil. The adjuvant was cotton oil (1.0 L ha-1 with emulsifier (BR 455 at 0.025 L ha-1. The field trial was set up at the 3rd fungicide application, when f four replications of each treatment. There were no statistical differences among treatments related to fungicide deposits by at a Confidence Interval of 95%. It was observed that the best results were obtained with Micronair (10 L ha-1 with oil, Stol (20 L ha-1 with oil and electrostatic system at 10 L ha-1 with the lowest relative humidity (64%.A ferrugem asiática da soja, causada pelo fungo Phakopsora pachyrhizi, é considerada a principal doença da soja, e, portanto, a escolha e o uso adequado dos equipamentos de pulverização são essenciais para seu controle. O objetivo deste trabalho foi avaliar o desempenho de diferentes equipamentos de pulverização aérea para o controle curativo da ferrugem da soja, utilizando o fungicida Impact 125 SC (flutriafol a 0,5 L p c ha-1. Os seguintes tratamentos foram avaliados: atomizador Micronair AU 5000 (10 L ha-1 com óleo e 20 L ha-1 sem óleo na calda; atomizador Stol ARD (10 e 20 L ha-1 ambos com óleo e o sistema eletrostático Spectrum (10 L ha-1 sem óleo a 64 e 71% de umidade relativa. Utilizou-se óleo de algodão (1,0 L ha-1 acrescido de emulsificante BR 455 a 0,025 L ha-1. O ensaio foi realizado na terceira aplicação de fungicidas, quando foram analisadas quatro repetições nas áreas aplicadas e quatro testemunhas não aplicadas para cada tratamento

  12. Temperature control of a steam generator by means of an hybrid system PID-RLC; Control de las temperaturas de un generador de vapor mediante un sistema hibrido PID-RLC

    Energy Technology Data Exchange (ETDEWEB)

    Palomares Gonzalez, Daniel; Garcia Mendoza, Raul [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1990-12-31

    A description is made of the design and evaluation of an hybrid control system, formed by a quadratic gaussian linear regulator (QLR) and proportional integral derivative (PID) type regulators. This scheme is used to control the reheater and secondary superheater steam temperatures of a steam generator model with a maximum capacity of 2,150,000 pounds per hour. Once applied to the model of a 300 MW steam power plant, this system showed better results than the traditional schemes and inclusively better than some modern control schemes. This fact characterizes it as a high potential system to be applied to steam power plants. [Espanol] Se describe el diseno y la evaluacion de un sistema de control hibrido, formado por un regulador lineal cuadratico gaussiano (RLC) y reguladores tipo proporcional integral derivativo (PID). Este esquema se utiliza para controlar las temperaturas de vapor del recalentador y sobrecalentador secundario del modelo de un generador de vapor con capacidad maxima de 2,150,000 libras por hora. Una vez aplicado al modelo de una unidad termoelectrica de 300 MW, este sistema produjo mejores resultados que los esquemas tradicionales e incluso mejores que algunos esquemas de control moderno. Esto lo caracteriza como un sistema con un alto potencial para aplicarse a unidades termoelectricas.

  13. Temperature control of a steam generator by means of an hybrid system PID-RLC; Control de las temperaturas de un generador de vapor mediante un sistema hibrido PID-RLC

    Energy Technology Data Exchange (ETDEWEB)

    Palomares Gonzalez, Daniel; Garcia Mendoza, Raul [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1991-12-31

    A description is made of the design and evaluation of an hybrid control system, formed by a quadratic gaussian linear regulator (QLR) and proportional integral derivative (PID) type regulators. This scheme is used to control the reheater and secondary superheater steam temperatures of a steam generator model with a maximum capacity of 2,150,000 pounds per hour. Once applied to the model of a 300 MW steam power plant, this system showed better results than the traditional schemes and inclusively better than some modern control schemes. This fact characterizes it as a high potential system to be applied to steam power plants. [Espanol] Se describe el diseno y la evaluacion de un sistema de control hibrido, formado por un regulador lineal cuadratico gaussiano (RLC) y reguladores tipo proporcional integral derivativo (PID). Este esquema se utiliza para controlar las temperaturas de vapor del recalentador y sobrecalentador secundario del modelo de un generador de vapor con capacidad maxima de 2,150,000 libras por hora. Una vez aplicado al modelo de una unidad termoelectrica de 300 MW, este sistema produjo mejores resultados que los esquemas tradicionales e incluso mejores que algunos esquemas de control moderno. Esto lo caracteriza como un sistema con un alto potencial para aplicarse a unidades termoelectricas.

  14. STAND-ALONE WIND ENERGY CONVERSION SYSTEM WITH MAXIMUM POWER TRANSFER CONTROL SISTEMA AISLADO DE CONVERSIÓN EÓLICA CON CONTROL DE MÁXIMA TRANSFERENCIA DE POTENCIA

    Directory of Open Access Journals (Sweden)

    Miguel López

    2009-12-01

    Full Text Available A controlled wind generation system for a stand alone application is presented in this paper. A cascaded step-up/step-down power electronic converters topology is proposed to control the wind power system in the whole wind speed range. For the low wind speed range, the control strategy is aimed to follow the wind turbine’s maximal power coefficient by adjusting the generator’s rotational speed. For high wind speeds, the system power regulation is also made by controlling the generator speed. This control is made by the DC/DC power electronic converter, which modifies its input voltage, changing the machine voltage and consequently varying the generator’s rotor speed. The proposed system is validated by computer simulation. The proposed control system shows a good performance for its application in autonomous wind energy systems.Un sistema de generación eólica para una aplicación aislada es presentado en este artículo. Una topología de convertidores electrónicos de potencia elevador y reductor conectados en cascada es propuesta para controlar la producción eólica en todo el rango de velocidades del viento. Para el rango de vientos suaves, la estrategia de control permite seguir el máximo coeficiente de potencia de turbina eólica mediante el ajuste de la velocidad de rotación del generador. En el rango de vientos fuertes, la regulación de la potencia del sistema se hace igualmente por control de la velocidad de giro del generador. La acción de control es realizada mediante el convertidor DC/DC de potencia el cual modifica su tensión de entrada, cambiando así la tensión en los terminales de la máquina y por consecuencia variando la velocidad de rotación del generador. El sistema propuesto es validado mediante simulación por computador. Los resultados muestran que el sistema de control propuesto actúa de buena manera para su aplicación en sistemas autónomos de generación eólica.

  15. Design and implementation of a system for controlling emission of radiation; Diseno e implementacion de un sistema para el control de emision de radiacion

    Energy Technology Data Exchange (ETDEWEB)

    Alvarez Alfaro, Luis Diego

    2012-07-01

    The Centro de Investigacion en Ciencias Atomicas, Nucleares y Moleculares of the Universidad de Costa Rica has seen the need to automate the process of changing filters, so that no person has to be exposed to the radiation emitted by the source, which can be very harmful to health. A graphical interface and a controller is implemented using the LabView software, to manipulate and detect the position of a rotating disk to a radiation source. The rotary disk is used in the Center by means of a microcontroller Arduino UNO and a stepper motor. An actuator and a stepper motor, controlled through signals sent by an Arduino UNO, have been defined and implemented in a first stage, by an integrated module of bridges H and an optical system to locate the position of the filters. The second stage has been the creation in parallel of a virtual instrument in LabView, with routines able to move the stepper motor shaft to a desired position, along with its graphical interface, adaptable to any stepper motor bipolar or unipolar, and simple to use. The program has been validated to verify proper operation, by a routine in which filters are chosen randomly and persons handling the program. The stages have been documented along with the user manual for proper use of virtual instrument and system assembly. (author) [Spanish] El Centro de Investigacion en Ciencias Atomicas, Nucleares y Moleculares de la Universidad de Costa Rica ha visto la necesidad de automatizar el proceso de cambio de filtros, de tal manera que ninguna persona tuviera que estar expuesta a la radiacion emitida por la fuente, que puede resultar muy danina para la salud. Una interfaz grafica y un controlador se ha implementado utilizando el software LabView, para manipular y detectar la posicion de un disco giratorio para una fuente de radiacion. El disco giratorio es utilizado en el Centro por medio de un microcontrolador Arduino UNO y un motor a pasos. Un actuador y un motor a pasos, controlados a traves de senales

  16. A interdependência entre sistemas de controle de produção e critérios de alocação de capacidades The relationship between production planning and control systems and methods of capacity allocation

    Directory of Open Access Journals (Sweden)

    Fernando Bernardi de Souza

    2002-08-01

    Full Text Available Há uma aparente carência de pesquisas sobre os inter-relacionamentos entre critérios de alocação de capacidades de recursos de manufatura e os métodos de controle de produção. Estudos sobre alocação de capacidades se baseiam geralmente em sistemas simplificados de empurrar a produção, desconsiderando sistemas mais atuais de gestão de produção. Por outro lado, pesquisas sobre a aplicabilidade de sistemas de gestão da produção não consideram apropriada a maneira como as capacidades produtivas dos recursos estão alocadas ao longo da linha. Analisar as interdependências entre esses dois grandes ramos de pesquisa é o objetivo deste artigo.There is a lack of researches on the relationship between methods of capacity allocation of manufacturing resources and production planning and control systems. Studies about capacity allocation are based on simplified push production systems not considering more current production management systems. By other side, studies about efficiency of production management systems don't consider the effect of different criteria of capacity allocation of manufacturing resources at the results. The purpose of this paper is to investigate how the different policies of capacity allocation and different production planning and control systems interrelate between each other.

  17. Application of current automation systems to projected control systems for wastes water treatment plant. Aplicacion de los sistemas actuales de automatizacion a la poyeccion de sistemas de control de las plantas de depuracion de aguas residuales

    Energy Technology Data Exchange (ETDEWEB)

    Aplicaciones Electriques, S.A.

    1994-01-01

    This article provides a general description of the features to be taken into consideration in designing the control system for a waste water treatment plant. In fact, such a description could be apphed to all industrial systems of a similar size. Planning the relevant key features is extremely important as the plant's eventual optimum operation depends on how the systems has been conceived from the outset. This planning must take into account the user's en requirements as well as the inclusion of further optimisation systems in the future. (Author)

  18. Métodos de control en sistemas domóticos: últimas tendencias en sistemas distribuidos

    Directory of Open Access Journals (Sweden)

    Moreno Navarro, I.

    1999-02-01

    Full Text Available Control systems lie amongst the most difficult issues to be tackled when it comes to designing home automation systems. Two classical tendencies may be considered to solve this problem. The first one consists of a centralised control system, whereas the second option advocates for a distributed network, where piece would take up certain responsibilities in the control of the whole system. In this paper we analyse some of the latest developments as regards programming distributed networks, focusing on home automation, specially Java and the latest Jini environments have dramatically improved the potential of such kind of distributed systems, thanks to them, it is possible to build a heterogeneous network including devices from different brands which work in collaborative systems, thus avoiding complex configurations.

    Uno de los aspectos más delicados a la hora de diseñar un sistema domótico es el que se refiere al modelo de control que deseamos establecer. Podemos considerar dos tendencias clásicas: la que trata de establecer un control centralizado del sistema y la que propone un control mucho más descentralizado, donde cada aparato seria responsable de cierta parte de la gestión del control ejercido sobre toda la red. En este articulo tratamos de profundizar en las últimas novedades aparecidas en el campo de la programación de los controladores asociados a una red domótica, en particular Java y el más reciente Jini, que aportan una serie de soluciones que facilitan la compatibilidad entre dispositivos de distintos fabricantes y apuestan claramente por una arquitectura de tipo distribuido, dotando a las redes domóticas de una flexibilidad y un potencial de crecimiento inusitados.

  19. Description of the control and safety systems of the RA reactor; Opis sistema za upravljanje i sigurnosnu zastitu RA

    Energy Technology Data Exchange (ETDEWEB)

    Popovic, B; Pesic, M [Institute of Nuclear Sciences Boris Kidric, Reaktor RA, Vinca, Beograd (Yugoslavia)

    1962-07-01

    This report contains detailed description and scheme of the control and safety system of the RA reactor. It consists of interconnected five systems: for automated regulation; compensation rods; safety rods; power density measurement device; period meter; automated D{sub 2}O level meter in the core. Automated regulation system is divided into two parts: basic system for reactor operation regime at power from 10kW - 10 MW and precise regulation system for operation at set-up power level up to 10 kW which is used occasionally.

  20. APLICACIÓN DEL MÉTODO CYBERSIN CON LÓGICA DIFUSA EN UN SISTEMA DE CONTROL DE GESTIÓN CYBERNETIC AND FUZZY LOGIC SYSTEM APPLICATION IN MANAGEMENT CONTROL SYSTEM

    Directory of Open Access Journals (Sweden)

    Miguel Rojas

    2012-06-01

    Full Text Available El modelo propuesto plantea un sistema de control para los ejecutivos de ventas de las Administradoras de Fondos de Pensiones (AFP. Con ayuda del método Cybersin se calcularon los indicadores: desempeño, logro y latencia que, a su vez, componen las variables, ventas y acompañamiento. Variables valiosas en el funcionamiento de este tipo de organizaciones y usadas en la medición del desempeño de los ejecutivos de ventas. Se construyó un sistema de inferencia difusa con el apoyo del software MATLAB, para simular la productividad de los ejecutivos; este considera las posibles combinaciones de las variables de entrada y compara el resultado con las metas establecidas por la organización.The proposed model presents a control system for sales executives of Pension Fund Administrators. Using the Cybersin method, performance, achievements and latency indicators were calculated. Based on this indicators variables sales and support were defined, which are valuable variables in the functioning of these type of organizations and are used in measuring the performance of sales executives. A fuzzy inference system was desingned with the help of MATLAB software to simulate the productivity of executives, using possible combinations of input variables to finally compare the result with stablished targets of the organization.

  1. Computerized information system of support to the electric energy losses control; Sistema de informacion computarizado de apoyo al control de perdidas de energia electrica

    Energy Technology Data Exchange (ETDEWEB)

    Barba Mar, Alvaro R; Perez Ortega, Joaquin; Rodriguez Ortiz, Guillermo; Rodriguez Cano, Rene; Zapata Garcia, Juan Antonio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1996-12-31

    The energy losses are due to several reasons, among others, to the same nature of the generation, transmission, and distribution processes. The purpose of this paper is to describe in a general manner a decentralized system that processes the information of the energy and demand meters, to obtain the energy balances and losses indexes at national level. Additionally, the main services offered by the functional model and of the data base, the adopted policies for the energy interchanges among responsibility areas and the concepts of use, are described; next, the data sources of the system are described, the fragmentation and corresponding replication to the database are described and its architecture of software and hardware is shown. [Espanol] Las perdidas de energia se deben a varias razones, entre otras, a la naturaleza misma de los procesos de generacion, transmision y distribucion de la electricidad. El proposito de este articulo es describir de manera general un sistema descentralizado que procesa la informacion de los medidores de energia y demanda, para la obtencion de balances de energia e indices de perdidas a nivel nacional. Ademas, se describen los principales servicios que ofrece, el modelo funcional y el de la base de datos, las politicas adoptadas para los intercambios de energia entre areas de responsabilidad y los conceptos de uso; despues se describen las fuentes de datos del sistema, la fragmentacion y replicacion correspondiente a la base de datos y se muestra su arquitectura de hardware y software.

  2. Computerized information system of support to the electric energy losses control; Sistema de informacion computarizado de apoyo al control de perdidas de energia electrica

    Energy Technology Data Exchange (ETDEWEB)

    Barba Mar, Alvaro R.; Perez Ortega, Joaquin; Rodriguez Ortiz, Guillermo; Rodriguez Cano, Rene; Zapata Garcia, Juan Antonio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1995-12-31

    The energy losses are due to several reasons, among others, to the same nature of the generation, transmission, and distribution processes. The purpose of this paper is to describe in a general manner a decentralized system that processes the information of the energy and demand meters, to obtain the energy balances and losses indexes at national level. Additionally, the main services offered by the functional model and of the data base, the adopted policies for the energy interchanges among responsibility areas and the concepts of use, are described; next, the data sources of the system are described, the fragmentation and corresponding replication to the database are described and its architecture of software and hardware is shown. [Espanol] Las perdidas de energia se deben a varias razones, entre otras, a la naturaleza misma de los procesos de generacion, transmision y distribucion de la electricidad. El proposito de este articulo es describir de manera general un sistema descentralizado que procesa la informacion de los medidores de energia y demanda, para la obtencion de balances de energia e indices de perdidas a nivel nacional. Ademas, se describen los principales servicios que ofrece, el modelo funcional y el de la base de datos, las politicas adoptadas para los intercambios de energia entre areas de responsabilidad y los conceptos de uso; despues se describen las fuentes de datos del sistema, la fragmentacion y replicacion correspondiente a la base de datos y se muestra su arquitectura de hardware y software.

  3. Control de trazabilidad de fruta mediante un sistema RFID

    OpenAIRE

    Asensio Nácher, Sergi

    2015-01-01

    En este proyecto se ha desarrollado una aplicación para realizar la trazabilidad de la fruta en un almacén utilizando dispositivos de radiofrecuencia RFID. El sistema ha sido desarrollado en C\\# y ha permitido automatizar todo el proceso de control de la fruta en un almacén. In this project, has been developed an application for making the traceability of fruit in a warehause by using radiofrequency systems RFID. The system was developed in C\\# and permits to control de processes of the fr...

  4. Micro controlled system used in the control and in the monitoring of batteries bank; Sistema microcontrolado usado no controle e monitoracao de banco de baterias

    Energy Technology Data Exchange (ETDEWEB)

    Bonacorso, Nelso Gauze

    1991-09-01

    The development of a closed loop micro controlled based system for battery charging, monitoring charge and discharge, and even more, detecting structure failures is presented. The control algorithm is emphasized, being applied a charging method which uses voltage, current and temperature information. The objective of using this control technique is the design of a high performance battery charger, allowing the longest battery life possible, in reliable UPS applications. A prototype has been built and laboratory tested. Experimental results, developed program routines and the system circuits are included. (author)

  5. Avaliação do desempenho de um sistema automático para controle da fertirrigação do tomateiro cultivado em substrato Performance evaluation of an automatic system for tomato fertigation control in substrate

    Directory of Open Access Journals (Sweden)

    Antonio J. Steidle Neto

    2009-09-01

    Full Text Available Este trabalho teve por objetivo avaliar o desempenho de um sistema de controle automático de fertirrigação para a produção do tomateiro em substrato de areia, comparativamente ao sistema de controle convencional quanto à redução de solução nutritiva. No método de controle automático, os eventos de fertirrigação foram estabelecidos em função das condições meteorológicas do ambiente de cultivo e do estádio de desenvolvimento da cultura. Para isso, o modelo de Penman-Monteith foi utilizado como suporte para a tomada de decisão sobre a frequência adequada para aplicação da solução nutritiva. No sistema de controle convencional, os intervalos entre as fertirrigações permaneceram fixos durante todo o ciclo do tomateiro. Os resultados demonstraram que o sistema de controle automático atendeu plenamente às necessidades hídricas da cultura, sem comprometer a produção do tomateiro, proporcionando reduções expressivas no consumo de solução nutritiva. Por outro lado, o sistema de controle convencional realizou número excessivo de fertirrigações, principalmente durante o estádio inicial de desenvolvimento do tomateiro e nos dias caracterizados por elevada nebulosidade. No estádio inicial de crescimento, verificou-se que os volumes totais de solução nutritiva, aplicados ao tomateiro pelo sistema convencional, excederam as necessidades hídricas da cultura em 1,31 e 1,39 L planta-1 em dias típicos com céu claro e nublado, respectivamente.The objective of this work was to compare the performance of an automatic fertigation control system, for soilless tomato production in sand substrate, as compared to a conventional control system. In the automatic control, fertigation events were established by meteorological conditions in the cultivation environment and crop development stage. In this way, the Penman-Monteith model was utilized as a decision support tool regarding the appropriate frequency for delivering the

  6. An environment integrated for identification, modeling, analysis, and control associated systems project to the power electric systems; Um ambiente integrado para identificacao, modelagem, analise e projeto de sistemas de controle associados a sistemas eletricos de potencia

    Energy Technology Data Exchange (ETDEWEB)

    Luz, Lucas Thadeu Orihuela da

    1990-12-01

    An integrated environment which was developed to give support to the activities of identification, modeling, analysis and simulation of control systems of Electric Power Systems - EPS is presented. It is a computer program to be used in compatible IBM P C microcomputers. The program has two algorithms for systems identification: one for identification in the frequency domain and other to be used in the time domain. For the analysis, were implemented the algorithms of the frequency response and the root locus. One can simulate multivariable and nonlinear models. A set of auxiliary transformations is available to obtain the dynamic equation of the model declared for the simulation and to transform it in a transfer matrix. The hierarchical menus used for the selection of the program functions are presented and the dialogues and the others communication mechanisms with the user are described. The program in EPS's is demonstrated through the design of a Power System Stabilizer. The results obtained with the program are compared with the ones that were obtained in field tests. (author)

  7. An environment integrated for identification, modeling, analysis, and control associated systems project to the power electric systems; Um ambiente integrado para identificacao, modelagem, analise e projeto de sistemas de controle associados a sistemas eletricos de potencia

    Energy Technology Data Exchange (ETDEWEB)

    Luz, Lucas Thadeu Orihuela da

    1990-12-01

    An integrated environment which was developed to give support to the activities of identification, modeling, analysis and simulation of control systems of Electric Power Systems - EPS is presented. It is a computer program to be used in compatible IBM P C microcomputers. The program has two algorithms for systems identification: one for identification in the frequency domain and other to be used in the time domain. For the analysis, were implemented the algorithms of the frequency response and the root locus. One can simulate multivariable and nonlinear models. A set of auxiliary transformations is available to obtain the dynamic equation of the model declared for the simulation and to transform it in a transfer matrix. The hierarchical menus used for the selection of the program functions are presented and the dialogues and the others communication mechanisms with the user are described. The program in EPS's is demonstrated through the design of a Power System Stabilizer. The results obtained with the program are compared with the ones that were obtained in field tests. (author)

  8. Temperature and pressure control in the discharge of refrigeration systems cooled by shell and tube condensers; Control de presion y temperatura de descarga en sistemas de refrigeracion enfriados por condensadores de casco y tubo

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez Martinez, R. [Asociacion de Ingenieros Egresados de la Universidad Autonoma Metropolitana, Mexico D. F. (Mexico)

    1995-12-31

    In the selection of a refrigeration equipment, the evaporator and condenser load conditions must be perfectly known, that is, the amount of heat energy that we have to reject from our space to cool in base to the temperature and mass to refrigerate. This situation carries on to the selection of the adequate compressor. But nevertheless the temperature conditions of the environment play an important roll in the behavior of the entire refrigeration system, altering in many cases the working conditions of each one of the components and therefore the functioning of the refrigeration system. This paper presents a method for controlling the behavior of each one of the components of the refrigeration system that perform in accordance with their design characteristics. [Espanol] En la seleccion de un equipo de refrigeracion, se deben conocer perfectamente las condiciones de carga del evaporador y del condensador, es decir la cantidad de calor que debemos de eliminar de nuestro medio a refrigerar, en base a la temperatura y masa a refrigerar. Esta situacion conlleva a la eleccion del compresor adecuado. Mas sin embargo, las condiciones de temperatura ambiente, juegan un papel importante en el comportamiento de todo el sistema de refrigeracion, alterando en muchos casos las condiciones de trabajo de cada uno de los componentes y por ende el funcionamiento del sistema de refrigeracion. El presente trabajo presenta un metodo para controlar el comportamiento de cada uno de los componentes dentro del sistema de refrigeracion para que trabajen de acuerdo a su diseno.

  9. Temperature and pressure control in the discharge of refrigeration systems cooled by shell and tube condensers; Control de presion y temperatura de descarga en sistemas de refrigeracion enfriados por condensadores de casco y tubo

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez Martinez, R [Asociacion de Ingenieros Egresados de la Universidad Autonoma Metropolitana, Mexico D. F. (Mexico)

    1996-12-31

    In the selection of a refrigeration equipment, the evaporator and condenser load conditions must be perfectly known, that is, the amount of heat energy that we have to reject from our space to cool in base to the temperature and mass to refrigerate. This situation carries on to the selection of the adequate compressor. But nevertheless the temperature conditions of the environment play an important roll in the behavior of the entire refrigeration system, altering in many cases the working conditions of each one of the components and therefore the functioning of the refrigeration system. This paper presents a method for controlling the behavior of each one of the components of the refrigeration system that perform in accordance with their design characteristics. [Espanol] En la seleccion de un equipo de refrigeracion, se deben conocer perfectamente las condiciones de carga del evaporador y del condensador, es decir la cantidad de calor que debemos de eliminar de nuestro medio a refrigerar, en base a la temperatura y masa a refrigerar. Esta situacion conlleva a la eleccion del compresor adecuado. Mas sin embargo, las condiciones de temperatura ambiente, juegan un papel importante en el comportamiento de todo el sistema de refrigeracion, alterando en muchos casos las condiciones de trabajo de cada uno de los componentes y por ende el funcionamiento del sistema de refrigeracion. El presente trabajo presenta un metodo para controlar el comportamiento de cada uno de los componentes dentro del sistema de refrigeracion para que trabajen de acuerdo a su diseno.

  10. Autoevaluación del Sistema de Control Interno Autoevaluación del Sistema de Control Interno

    Directory of Open Access Journals (Sweden)

    Rubí Consuelo Mejía Quijano

    2005-06-01

    Full Text Available La autoevaluación del control es un elemento del Sistema de Control Interno que permiteel diagnóstico y el fortalecimiento organizacional. Se desarrolla en toda la entidad y supone el apoyo de la alta dirección, apoyo representado en recursos físicos y la orientación que lebrinde durante su aplicación.Dicho elemento genera mayor responsabilidad en los empleados, al involucrarlos en el análisisde fortalezas y debilidades del sistema de control, al comprometerlos con la recolección de la información que soporta el juicio sobre el estado del sistema y al permitirles proponer planesde mejoramiento que contribuyan al logro del objetivo del sistema de control, y por ende alde la organización.Las dificultades en su aplicación pueden provenir de aspectos relacionados con la culturaorganizacional: si el personal no está dispuesto a colaborar con los grupos de apoyo en elsuministro de la información, si existe apatía con el proceso y si no se cuenta con personas capacitadas para realizarlo.El proceso se efectúa en tres etapas; la primera consiste en la planeación, en la que el Comité de Autoevaluación compromete la gerencia y se asignan actividades y responsabilidades; sedefine el cronograma de trabajo, los recursos necesarios y se capacita a los grupos de apoyo;la segunda se refiere a la ejecución, consistente en el levantamiento de la información que soporta el análisis de cada uno de los elementos del sistema de control y permite emitir juicios objetivos sobre su desempeño; finalmente, la tercera, elaboración del informe, da cuenta delos resultados de la autoevaluación del sistema de control, de su desarrollo y sus dificultades, y establece las propuestas de mejora.Control Self-Assessment is an element of the Internal Control System which allows the organizational diagnose and strengthening. It is run throughout the entity and supposes the support from the high managerial circle. This support is in the form of physical

  11. Sistemas de control push-pull. Un estudio comparativo.

    OpenAIRE

    Ruiz Usano, Rafael; Muñoz Pérez, Miguel Ángel

    2001-01-01

    Un aspecto fundamental a nivel operacional en los sistemas de producción es la obtención de la cantidad deseada de unidades a producir con la mínima cantidad de inventario en proceso. Para conseguirlo podemos optar por distintos sistemas de control de l

  12. Generalized conventional and intelligent supervisory control system for combined cycle generation power plants; Sistema de control supervisorio generalizado convencional e inteligente para centrales de generacion de ciclo combinado

    Energy Technology Data Exchange (ETDEWEB)

    Martinez Morales, Miguel Angel

    2004-12-15

    (conventional or intelligent) is possible to get more power generation than if we use the automatic methods based on feedback MW control. Consequently, the financial benefit due to the MW generated along a period of 2 months, is equivalent to return the investment required if the CCPP would had been repowered. Test also showed that with the fuzzy based SGC is possible to get a 'little more' power generation than if we use the PID based SGC. The development and implementation of the SGC was made in three phases: First Phase: Upgrading of the simulation dynamic mathematical model and implementation in a new software platform based on LabWindows/CVI. Second Phase: Design, implementation and testing of the PID based SGC. Third Phase: Design and implementation and testing of the Intelligent SGC, based in fuzzy logic. [Spanish] El programa de obras de generacion de la Comision Federal de Electricidad (CFE) del ano 2004 al ano 2008 esta caracterizado por el dominio del proceso de ciclo combinado para la expansion de generacion de energia en Mexico [CFE, 2000]. De acuerdo con los datos presentados por esta fuente, el incremento estimado en la capacidad de generacion de potencia electrica es de 12876 MW, de los cuales las centrales de ciclo combinado aportaran 10655 MW, lo que representa el 82.75%. Bajo estas expectativas de expansion de generacion de energia en Mexico, en este trabajo de tesis se desarrollo un sistema de control supervisorio generalizado (CSG) convencional (PID) e inteligente (logica difusa) para una central de generacion de ciclo combinado, el cual permite lograr la operacion optima de la planta a traves del arranque automatico de las unidades generadoras y obtener la maxima cantidad posible de potencia electrica en forma automatica y segura. Para el desarrollo del CSG se implanto un lazo de control por temperatura para el sistema de turbina de gas (TG) y un lazo de control por presion estrangulada para la turbina de vapor (TV). El diseno de estos sistemas

  13. Control system pre-feedbacked for the super heated steam temperature in heat recovering units; Sistema de control pre-retroalimentado para la temperatura de vapor sobrecalentado en recuperadores de calor

    Energy Technology Data Exchange (ETDEWEB)

    Lopez Alvarez, Hilario; Madrigal Espinosa, Guadalupe [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1996-12-31

    The study that is presented corresponds to the analysis, design and development of a pre-feedbacked control system for the superheated steam temperature regulation in the heat recovery units of a combined cycle thermoelectric power plant. The designs of the feedback controller and the pre-feedback control system were implemented based in a linear model of the tempering zone. This linear model was obtained through the application of parametric identification techniques to the non-linear mathematical model of a combined cycle power plant. [Espanol] El estudio que se presenta corresponde al analisis, diseno y desarrollo de un sistema de control pre-retroalimentado para regular la temperatura de vapor sobrecalentado en los recuperadores de calor de una central termoelectrica de ciclo combinado. Los disenos del controlador retroalimentado y del sistema de control prealimentado se realizaron con base en un modelo lineal de la zona de atemperacion. Este modelo lineal se obtuvo aplicando tecnicas de identificacion parametrica al modelo matematico no-lineal de una central de ciclo combinado.

  14. Control system pre-feedbacked for the super heated steam temperature in heat recovering units; Sistema de control pre-retroalimentado para la temperatura de vapor sobrecalentado en recuperadores de calor

    Energy Technology Data Exchange (ETDEWEB)

    Lopez Alvarez, Hilario; Madrigal Espinosa, Guadalupe [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1997-12-31

    The study that is presented corresponds to the analysis, design and development of a pre-feedbacked control system for the superheated steam temperature regulation in the heat recovery units of a combined cycle thermoelectric power plant. The designs of the feedback controller and the pre-feedback control system were implemented based in a linear model of the tempering zone. This linear model was obtained through the application of parametric identification techniques to the non-linear mathematical model of a combined cycle power plant. [Espanol] El estudio que se presenta corresponde al analisis, diseno y desarrollo de un sistema de control pre-retroalimentado para regular la temperatura de vapor sobrecalentado en los recuperadores de calor de una central termoelectrica de ciclo combinado. Los disenos del controlador retroalimentado y del sistema de control prealimentado se realizaron con base en un modelo lineal de la zona de atemperacion. Este modelo lineal se obtuvo aplicando tecnicas de identificacion parametrica al modelo matematico no-lineal de una central de ciclo combinado.

  15. Aplicación de algoritmos de control clásico, adaptable y robusto a sistemas dinámicos de parámetros variables;Classic, adaptable and robust control algorithm application, to variant parameter dynamic system.

    Directory of Open Access Journals (Sweden)

    Orlando – Regalón Anias

    2012-11-01

    Full Text Available Existen múltiples sistemas dinámicos cuyos modelos matemáticos se caracterizan por ser de primer orden yparámetros variables con el tiempo. En estos casos las herramientas clásicas no siempre logran un sistema decontrol que sea estable, posea un buen desempeño dinámico y rechace adecuadamente las perturbaciones, cuandoel modelo de la planta se desvía del nominal, para el cual se realizó el diseño.En este trabajo se evalúa elcomportamiento de tres estrategias de control en presencia de variación de parámetros. Estas son: control clásico,control adaptable y control robusto. Se realiza un estudio comparativo de las mismas en cuanto a complejidad deldiseño, costo computacional de la implementación y sensibilidad ante variaciones en los parámetros y/o presencia dedisturbios. Se llega a conclusiones que permiten disponer de criterios para la elección más adecuada, endependencia de los requerimientos dinámicos que la aplicación demande, así como de los medios técnicos de que sedisponga.Many dynamic systems have first order mathematic models, with time variable parameters. In these cases, theclassical tools do not satisfy at all control system stability, good performance and perturbation rejection, when theplant model differs from the nominal one, for which the controller was designed.In this article, three control strategiesare evaluated in parameter variations and disturbance presence. The strategies are the followings: classical control,adaptive control and robust control. A comparative study is carried out, taking into account the design complexity, thecomputational cost and the sensitivity. The obtained conclusions helps to provide the criterion to choose the mostadequate control strategy, according to the necessary dynamic, as well as the available technical means.

  16. Importancia del manual de los sistemas contables en el sistema de control interno.

    OpenAIRE

    Nicolás Valdés Rodríguez

    2007-01-01

    La dirección administrativa del país en los últimos 3 años ha insistido en la necesidad de profundizar en los mecanismos de control económico –financiero de las entidades, el presente trabajo va dirigido a contribuir en alguna medida a lograr ese propósito. El sistema contable de una Entidad forma parte indisoluble del Sistema de Control Interno de la misma, por la vinculación tan estrecha que existe entre los mismos. El objetivo fundamental del trabajo ”Importancia del Manual de ...

  17. Control system and environmental parameters monitoring of the Tandetron Accelerator clean room; Sistema de control y monitoreo de parametros ambientales del cuarto limpio del acelerador Tandetron

    Energy Technology Data Exchange (ETDEWEB)

    Mejia V, M.E.; Garcia H, J.M.; Flores M, J. [ININ, Departamento de Sistemas Electronicos, 52750 La Marquesa, Estado de Mexico (Mexico)]. e-mail: mmejia@nuclear.inin.mx

    2007-07-01

    A control system and monitoring of humidity and temperature implemented by means of a system based on a microcontroller, an intelligent sensor and a stage of power for the actuators handling is described. The change of the levels of reference of the control system and the monitoring of the physical controlled variables can be carried out from any connected computer to a local net or Internet. (Author)

  18. Protection and control of modeled local power systems and simulation of safe power feeding systems; Proteccion y control local de sistemas electricos de potencia modelado y simulacion de sistemas de alimentacion segura

    Energy Technology Data Exchange (ETDEWEB)

    Rothschild, Marcelo A. [SADE SKANSKA S.A., Buenos Aires (Argentina)]. E-mail: mrothsch@sade.com.ar

    2001-07-01

    This document presents a guideline for modeling and simulation of safe feeding systems. Examples of systems currently in operation are presented for which, based on attended project by simulation, it has been possible to introduce substantial improvements in relation to the reliability and security of those installations.

  19. Radioisotope measurement system; Sistema de medicion de radioisotopos

    Energy Technology Data Exchange (ETDEWEB)

    Villanueva Ruibal, Jose [Comision Nacional de Energia Atomica, Ezeiza (Argentina).Centro Atomico Ezeiza

    2007-07-01

    A radioisotope measurement system installed at L.M.R. (Ezeiza Atomic Center of CNEA) allows the measurement of nuclear activity from a wide range of radioisotopes. It permits to characterize a broad range of radioisotopes at several activity levels. The measurement hardware as well as the driving software have been developed and constructed at the Dept. of Instrumentation and Control. The work outlines the system's conformation and its operating concept, describes design characteristics, construction and the error treatment, comments assay results and supplies use advices. Measuring tests carried out employing different radionuclides confirmed the system performing satisfactorily and with friendly operation. (author) [Spanish] Un sistema de instrumentacion instalado en el L.M.R. (Centro Atomico Ezeiza de la CNEA) mide en amplio rango la actividad del decaimiento nuclear de radioisotopos. Permite caracterizar una amplia gama de radioistopos de variados niveles de actividad. Tanto el hardware de medicion como el software de operacion han sido desarrollados y construidos en el Dept. Instrumentacion y Control. El trabajo esboza la conformacion del sistema y su concepto de operacion, describe caracteristicas de disenio, construccion y del tratamiento del error, comenta resultados de ensayos y provee recomendaciones de uso. Pruebas de medicion realizadas empleando diversos nucleidos comprobaron que el sistema funciona en forma satisfactoria y su operacion es amigable. (autor)

  20. Stability of two measuring systems used in quality control of mammography; Estabilidade de dois sistemas de medicao utilizados no controle de qualidade de mamografos

    Energy Technology Data Exchange (ETDEWEB)

    Barreira, Jacqueline Sales; Vivolo, Vitor, E-mail: jacsales@usp.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2014-07-01

    The use of X-Rays for diagnosis is very important for medicine, including mammographic exam. A quality control program is necessary to control the radiation systems performance. The objective of this paper is evaluation of stability of measurement working system and measurement standard system, collecting meters of charge and dose using one source of Strontium 90 (Sr-90). The results of this test are very important to determine if the instruments are calibrated for use in quality control program for a mammography equipment. (author)

  1. Intelligent control system for the temperature regulation in a gas turbine of a combined cycle fossil fuel power plant; Sistema de control inteligente para regular la temperatura en la turbina de gas de una central termoelectrica de ciclo combinado

    Energy Technology Data Exchange (ETDEWEB)

    Espindola Vasquez, Agustin

    2004-11-15

    logic theory and its performance was evaluated using a non- linear mathematical model that emulates the CTCC behavior. The fuzzy supervision system is integrated by three main modules: Supervision of blades temperature during the starting stage of the UTG; Supervision of blades temperature runback during the power generation stage of the UTG, and Control by Temperature during power generation stage of the UTG. The temperature fuzzy supervisor is implemented in a nonlinear mathematical model that simulates a CTCC. The obtained and analyzed results in the different sceneries of the simulation tests show that the temperature fuzzy supervision system displays a better performance than the obtained with the scheme of conventional supervision. [Spanish] En las Unidades Turbogas (UTG) de una Central Termoelectrica de Ciclo Combinado (CTCC), una de las variables criticas tanto desde el punto de vista operativo como desde el punto de vista de seguridad, es la temperatura de los alabes de la turbina. El mejor desempeno de la unidad turbogas desde el punto de vista de generacion electrica se obtiene cuando es posible lograr la mayor eficiencia termica. Desde el punto de vista de seguridad se busca mantener la temperatura de los alabes en el limite impuesto por el fabricante, garantizando con esto la integridad de las partes internas de la UTG al evitar que esfuerzos termicos considerables decrementen su vida util. Para mantener la temperatura de alabes dentro del limite establecido, el sistema de control de la UTG cuenta con un sistema de supervision de temperatura de alabes, que modifica la referencia de los controladores PI de velocidad o de potencia generada, mismos que regulan la valvula de flujo de combustible a la camara de combustion de la UTG. Este sistema de supervision esta basado en condiciones logicas para generar su salida. En las plantas de proceso cuya operacion es compleja y su comportamiento dinamico es no lineal, las estrategias de control de lazo simple no

  2. Challenges for maintaining the modernization of instrumentation and control systems; Desafios para el mantenimiento en la modernizacion de sistemas de instrumentacion y control

    Energy Technology Data Exchange (ETDEWEB)

    Rojas, V.

    2014-04-01

    Instrumentation and control system upgrades in nuclear power plants come with some challenges for their maintenance staff. It is important to have a long term modernization plant that derives from specific studies for each system. Training, spares, configuration control and cybersecurity are critical topics to take into account from the beginning of these projects. New system maintenance plans can require a new approach in accordance with the technology. FPGAs (Field Programmable Gate Array) appear as the alternative for the future, mainly in safety systems. (Author)

  3. Digital systems to acquire radiological imaging. Characteristics and quality control; Sistemas digitales de adquisicion de imagenes radiograficas. Caracteristicas y Control de Calidad

    Energy Technology Data Exchange (ETDEWEB)

    Torres Cabrera, R.; Hernando Gonzalez, I.

    2006-07-01

    Due to its special characteristics, quality control in digital radiographic systems is very important, even more than in conventional film-screen systems. Differences between digital and analogical images,a in terms of dynamics range, spatial and contrast resolution, and the flexibility of data post-processing require some actions to maintain clinical images in an optimum quality level. Revision 1 of the Spanish Protocol of Quality Control in Diagnostic Radiology includes a chapter dedicated to the quality control of these digital systems for the acquisition of radiographic images. In this paper the different parameters for quality control procedures are described. Also some difficulties to be concerned about (absence of levels of tolerance, access to the raw-data images and related information, availability of use anthropomorphic phantoms, etc, etc) are noted, as well as the most significant aspects of the differences in relation to the ana logical systems. (Author) 15 refs.

  4. Analysis of the acceptance procedure and quality control a virtual simulation system; Analisis del procedimiento de aceptacion y control de calidad de un sistema de simulacion virtual

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez Ruiz, C.; Pedrero de Aristizabal, D.; Jimenez Rojas, R.; Garcia Hernandez, M. J.; Ruiz Galan, G.; Ayala Lazaro, R.; Garcia Marcos, R.

    2011-07-01

    Acceptance has been made, determining the reference state, commissioning and implementation of control protocol virtual simulation system consists of an image acquisition unit of computerized tomography (CT), an independent external location laser locator and a simulation module associated with the existing scheduler for clinical dosimetry in radiotherapy. This paper summarizes the path followed in this process, together with the established procedure for periodic monitoring and analysis system of the results obtained in the two years of clinical and control.

  5. Linear concentration system; Sistema de concentracion lineal

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez Lugo, J.I; Leon Rovira, N; Aguayo Tellez, H [Instituto Tecnologico y de Estudios Superiores de Monterrey, Monterrey, Nuevo Leon (Mexico)]. E-mails: a00812662@itesm.mx; noel.leon@itesm.mx; haguayo@itesm.mx

    2013-03-15

    Solar linear concentration technologies to generate high temperatures are limited to the ranges of 200 to 500 degrees Celsius. While its performance has been tested through prototypes and pilot plants around the world, there are still areas of opportunity that can be exploited to obtain a linear concentration that achieves temperatures above this range in order to have a better use of the available solar energy. Because of this: It is possible to develop a linear concentration system that can track the sun with minimal movement of the absorber-receiver while maintaining temperatures above 850 degrees Celsius sufficient for industrial processes that require that temperature. The methodology consists of a series of stages (conceptual design, simulation, evaluation, development concept, results and validation) through which concepts are generated that allow design and evaluation of solar concentrator configurations with the help of simulation software. We have designed a linear parabolic concentrating system which comprises a set of mirrors segments with different focal lengths that works within the range of 600 degrees Celsius; however, it is advancing in the development of a double concentration to reach 850 degrees Celsius. [Spanish] Las tecnologias de concentracion lineal solar para generar altas temperaturas se ven limitadas a los rangos de 200 a 500 grados centigrados. Si bien su funcionamiento ha sido probado a traves de prototipos y plantas piloto alrededor del mundo, aun existen areas de oportunidad que pueden ser aprovechadas para obtener un sistema de concentracion lineal que permita alcanzar temperaturas mayores a este rango para asi tener un mejor aprovechamiento de la energia solar disponible. Debido a esto: Es posible desarrollar un sistema de concentracion lineal capaz de seguir la trayectoria del Sol con minimo movimiento del absorbedor-recibidor al mismo tiempo que mantiene temperaturas superiores a los 850 grados centigrados suficientes para

  6. Control by hardware of government systems for laser diodes with STM32F4 and Peltier cells; Control por hardware de sistemas de gobierno para diodos laser con STM32F4 y celdas Peltier

    Energy Technology Data Exchange (ETDEWEB)

    Ulloa Solano, Natalia Irina

    2013-07-01

    A low cost prototype of a government system is developed for laser diodes with STM32F4 microcontrollers and Peltier cooling. Commercial and homemade government system (with STM32F4 microcontrollers ) are investigated with the objective of adequately control the current of a laser diode. Characteristics of STM32F4 microcontrollers are described. The low cost platforms as the Arduino and Raspberry Pi are compared. A bibliographical and documentary compilation is realized for the preliminary study of the components and tools to use in the prototype. The theory related with the heat transfer between a laser diode and the outside, and a Peltier cell and outside is summarized. A heat dissipation model is proposed of a system formed by a laser diode and Peltier cell. A control system of current and fed back temperature is designed and implemented to allow adequately control laser diodes without and with photodiode (2 pickups and 3 pickups respectively). The viability of control with free software is studied and corroborated. The temperature control of the laser diode using a Peltier cell as cooler has been possible through a simple control of ON/OFF mode. The integration of devices such as ADC, DAC, timers and facilities of STM32F4 microcontroller, have allowed to optimize costs by hardware, save time and costs. Also, the incorporation of the Cortex-M4 processor has optimized the consumption of operational resources and has executed much of its instruction set of efficient way. Because of this, the project has complied with its maximum as to low cost is concerned [Spanish] Un prototipo de bajo costo de un sistema de gobierno es desarrollado para diodos laser con microcontroladores STM32F4 y enfriamiento con Peltier. Los sistemas de gobierno comerciales y caseros (con microcontroladores STM32F4) son investigados con el objetivo de controlar adecuadamente la corriente de un diodo laser. Las caracteristicas de los microcontroladores STM32F4 son descritas. Las plataformas de

  7. Importancia del manual de los sistemas contables en el sistema de control interno.

    Directory of Open Access Journals (Sweden)

    Nicolás Valdés Rodríguez

    2007-01-01

    Full Text Available La dirección administrativa del país en los últimos 3 años ha insistido en la necesidad de profundizar en los mecanismos de control económico –financiero de las entidades, el presente trabajo va dirigido a contribuir en alguna medida a lograr ese propósito. El sistema contable de una Entidad forma parte indisoluble del Sistema de Control Interno de la misma, por la vinculación tan estrecha que existe entre los mismos. El objetivo fundamental del trabajo ”Importancia del Manual de los Sistemas Contables en el Sistema de Control Interno”, es destacar la utilidad práctica, técnica y organizativa que tiene el Manual para elevar la eficiencia del trabajo contable de las Entidades y su repercusión positiva en la eficiencia el sistema de Control Interno establecido. Los beneficios que aporta el Manual radican en que crea una base normativa contable adecuada a las características de cada entidad. Como se sabe en las transformaciones económicas realizadas en el país, la existencia de dos monedas en el trabajo económico-contable de muchas entidades, la puntualización del objeto social y la cartera de productos y servicios han complejizado el trabajo contable, requiriendo una mayor adecuación a las características propias de cada entidad, lo cual se logra con la realización del Manual.

  8. Technical feasibility of using silver and copper ions electro generated in the microbiological control of cooling systems; Factibilidad tecnica para emplear iones plata y cobre electrogenerados en el control microbiologico de los sistemas de enfriamiento

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Susana M; Martinez Meza, Esteban; Alvarez Gallegos, Alberto [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

    2001-07-01

    bacterial populations promoters of the microbiological influenced corrosion and the biological fouling at levels of 1000 c/ml and less, competing with the conventional cooling water treatment processes. Also, the adherence capacity of the biofilm on the surfaces of the cooling system would be seriously affected because the silver is adsorbed to the surface that contains it and still continues its bactericidal effect. Additionally, the coliform bacteria are reduced below the levels accepted by the Mexican Official Standard. A table of the silver required for disinfection of different water qualities is shown and another one on the evaluation of the process and finally one on the effectiveness of the process using the silver/copper system in residual water. [Spanish] El objetivo de este trabajo es determinar la factibilidad tecnica de sustituir el uso de cloro por otro biocida (ionizacion de plata o cobre) no peligroso en aguas de enfriamiento. Esta tecnica de ionizacion podria ser empleada para tratar el agua de procesos industriales en general. El agua empleada provino del agua de repuesto del sistema de enfriamiento de la Central Termoelectrica de Valle de Mexico (CTEVM) y agua residual de las plantas de tratamiento del Instituto Mexicano de Tecnologia del Agua (IMTA) y el Instituto de Investigaciones Electricas (IIE). Los tres tipos de agua empleados tienen caracteristicas fisicas, quimicas y biologicas similares. La metodologia usada fue la prueba de jarras y por sistema continuo. Se indica el analisis bacteriologico llegando a la conclusion. Los sistemas metalicos estudiados en el establecimiento del control microbiologico en el agua residual y agua de repuesto son plata, plata/cobre y cobre en los intervalos de concentracion de 200 mg/L a 3000 mg/L de plata y de 200 mg/L a 1200 mg/L de cobre. Los experimentos realizados en la prueba de jarras (sistema cerrado) se llevaron a cabo a dos temperaturas (25 {+-} 0.5 y 32 {+-} 0.5 ) sin controlar el pH; mientras que en el

  9. sistemas

    Directory of Open Access Journals (Sweden)

    Diego Alejandro Muñoz Gaviria

    2006-01-01

    Full Text Available El texto presentado a continuación, plantea en términos generales las principales posturas conceptuales del sociólogo alemán Niklas Luhmann sobre las ideas de Max Weber y su teoría de la acción social, y de Talcott Parsons y sus planteamientos en torno a la teoría de los sistemas sociales. Al final del escrito se hace especial énfasis en el rol protagónico que para Luhmann tienen las ciencias sociales y humanas en la autorreferencia del sistema social.

  10. Regulación de la respiración: organización morfofuncional de su sistema de control Regulation of breathing: morphological and functional organization of its control system

    Directory of Open Access Journals (Sweden)

    Lizet García Cabrera

    2011-04-01

    Full Text Available La función principal y reguladora del sistema respiratorio es mantener las presiones normales de oxígeno y dióxido de carbono, así como la concentración de iones H+ o hidrogeniones, lo cual se consigue adecuando la ventilación pulmonar a las necesidades metabólicas orgánicas de consumo y producción de ambos gases, respectivamente. A pesar de las amplias variaciones en los requerimientos de captación de oxígeno y eliminación de dióxido de carbono, las presiones arteriales de ambos elementos se mantienen dentro de márgenes muy estrechos por una compleja regulación de la ventilación de los pulmones mediante determinados sistemas de control. Por tratarse de un tema muy complicado y disponerse ahora de nuevos conocimientos al respecto, se decidió describir en este breve artículo la organización morfofuncional general de los elementos que integran el sistema de control de la función respiratoria humana normal.The regulating main function of the breathing system is to maintain the normal oxygen and carbon dioxide pressures, as well as the H+ or hydrogen ions concentration, which is achieving adapting the lung ventilation to the organic metabolic needs of consumption and production of both gases, respectively. In spite of the wide variations in the requirements of oxygen intake and of carbon dioxide elimination, the arterial pressures of both elements remain within very narrow margins due to a complex regulation of the lungs ventilation by means of certain control systems. As it is a very complicated topic and as there are now new knowledge on this respect, it was decided to describe in this brief work the general morphological and functional organization of the elements that form the control system of the normal human breathing function.

  11. Sistemas de controle gerencial e contratos psicológicos

    OpenAIRE

    Ivan Canan

    2013-01-01

    Esta pesquisa investiga a relação entre os sistemas de controle gerencial e os contratos psicológicos, como forma de discutir as relações contratuais nas organizações. Os sistemas de controle gerencial foram definidos como processos administrativos de proposição de parâmetros comportamentais idealmente construídos para criar convergência de objetivos entre servidores e organizações, cuja dinâmica de controle implica no diagnóstico de resultados e nos processos de interação acerca do desempenh...

  12. Distribution electric system simulator to support decision-making for CFE (Federal Electric Commission) Distribution Control Centers; Simulador del Sistema Electrico de Distribucion para apoyo en la toma de decisiones en Centros de Control de Distribucion de la CFE

    Energy Technology Data Exchange (ETDEWEB)

    Espinosa Reza, Alfredo; Quintero Reyes, Agustin; Garcia Mendoza, Raul; Calleros Torres, Tito Manuel [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Borjas Diaz, Jesus Fidel; Sierra Rodriguez, Benjamin; Torres Abrego, Rafael [Comision Federal de Electricidad (Mexico)

    2011-07-01

    This article presents the physical, logical and functional architecture designed to integrate the Electric Distribution System (EDS) simulator developed for the CFE and the electric energy Distribution Control Centers in Mexico. The objective of the EDS simulator is to integrate engineering distribution functions (power flow, short circuit, optimal reconfiguration and reliability, among others) and an expert system (Case-based Reasoning) to aid the process of information analysis, decision-making and the capacity-building of the CFE's Regional and Zonal Distribution Control Centers. The EDS simulator has been installed, updated and is operational in the Tampico Zone and the Gulf Division Distribution Center, as an established product that continually evolves along with the actual operating dynamics. [Spanish] Se presenta la arquitectura fisica, logica y funcional disenada para integrar el simulador del Sistema Electrico de Distribucion (SED) desarrollado para la Comision Federal de Electricidad (CFE) y los Centros de Control de Distribucion de energia electrica en Mexico. El objetivo del simulador del SED es integrar funciones de ingenieria de distribucion (flujo de potencia, corto circuito, reconfiguracion optima, confiabilidad, entre otras) y un sistema experto (Razonamiento Basado en Casos) para apoyar el proceso de analisis de informacion, la toma de decisiones y la capacitacion en los Centros de Control de Distribucion Zonales y Regionales de CFE. El Simulador del SED se encuentra instalado, actualizado y en operacion en la Zona Tampico y en la Division de Distribucion Golfo Centro como un producto consolidado y en constante evolucion a la par de la dinamica operativa real.

  13. Dynamic system for the evaluation of CIM monitoring and control techniques; Sistema dinamico para avaliacao de tecnicas de monitoracao e controle da CIM

    Energy Technology Data Exchange (ETDEWEB)

    Penna, Monica de Oliveira [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES). Biotecnologia e Ecossistemas]. E-mail: mpena@cenpes.petrobras.com.br; Baptista, Walmar; Brito, Rosane Fernandes de [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES). Tecnologia de Materiais, Equipamentos e Corrosao]. E-mails: walmar@cenpes.petrobras.com.br; rosanef@cenpes.petrobras.com.br; Silva, Edilson Domingos da; Nascimento, Juliana Rangel do [Fundacao Gorceix, Ouro Preto, MG (Brazil)]. E-mails: edilson@cenpes.petrobras.com.br; julianarn@cenpes.petrobras.com.br; Coutinho, Claudia M.L.M. [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil). Inst. de Biologia. Dept. de Biologia Celular e Molecular

    2002-03-01

    In general, the two main problems associated to the water injection system for secondary petroleum recovery are the corrosion control and the decrease in solid injection in the reservoir. Corrosion problems in injection water systems may have abiotic as well as biotic causes, and the occurrence of reservoir plugs can result from the injection of particles (suspended solids as well as corrosion products), bacteria and fouling formation. Due to the need to implement a methodology for the evaluation of abiotic and biotic corrosive processes, monitoring techniques and MIC control in a dynamic system, an apparatus was built that simulates the characteristics of a water injection system. The apparatus allows monitoring and control of the parameters that, when varied, may influence the performance of the quality of the injected water. The dynamic system was designed to simulate as precisely as possible the conditions that allow the SRB and heterotrophic bacteria to create fouling in a water injection system. This article discusses the dynamic system, analytical methods and some preliminary results. (author)

  14. Dynamic preventive control of electric power systems through load shedding; Controle preventivo dinamico de sistemas de energia eletrica: formulacao atraves do corte de carga

    Energy Technology Data Exchange (ETDEWEB)

    Righeto, Luzia F.P.; Minussi, Carlos R. [UNESP, Ilha Solteira, SP (Brazil). Dept. de Engenharia Eletrica

    1997-12-31

    This work presents a model to be used in Electric Power System preventive control, taking into account the dynamic network aspects, the effects caused by great oscillations in the synchronous machines angles (transient stability), electric equipment outages, short-circuit, etc. The energy function will be used as a form of measure the system stability degree using a criterion defined as security margin. The used control action will be the load shedding. (author) 16 refs.; e-mail: minussi at dee.feis.unesp.br

  15. Development of a computational system for supporting to the wells control in deep water; Desenvolvimento de um sistema computacional para suporte ao controle de pocos em aguas profundas

    Energy Technology Data Exchange (ETDEWEB)

    Sotomayor, Gabriel Paulo Gutierrez

    1997-06-01

    This dissertation presents the development and application of a computational tool that works with an integrated vision of well control process and includes tasks related to the well design concerning safety, kick detection and circulation out of the well. This tool, named PROKICK, offers to the technical personnel involved in well control operations, functionality to operational procedures, pressure behavior prediction and preparation of killsheet for deepwater wells. Also, this tool supports the analysis of well control problems with knowledge systems, built production rules. (author)

  16. Sistemas de control de vibraciones en estructuras de gran altura

    Directory of Open Access Journals (Sweden)

    Montanaro, Maria Inés

    2002-02-01

    Full Text Available The increasing of big cities with a great population density, flows to the multiplication of light and thin towers in very high buildings, with an small natural damping. So, those buildings are exposed to the wind oscillations and to the earthquakes. Those oscillations could produce damages in the structure, affect its functionality and/or to be a cause of discomfort. In order to reduce the structural risk of excessive deformations or accelerations, we want to bring up here a solution lied with the dissipation of vibrational energy in the structural dampers. The objective of this work is to bring a c1ear and complete c1assification and description of all isolation and vibration controls known till the moment and their main application' fields. The definition of those systems is completed with graphics, characteristics and structures examples. This c1assification will allow a real interpretation of advantages and disadvantages of all isolation and vibration controls concerning structural applications.El aumento de la densidad poblacional y de las grandes urbes ha incrementado la necesidad de las torres de edificios de gran altura, las cuales tienden a ser muy livianas y delgadas, por lo tanto poseen un amortiguamiento natural muy pequeño, lo que los hace más propensos a las oscilaciones del viento y los sismos. Dichas oscilaciones pueden causar daño a la estructura, afectar su funcionalidad y/o causar incomodidad. Una solución planteada para reducir el riesgo estructural de experimentar deformaciones excesivas o aceleraciones es la disipación de energía vibracional en los amortiguadores estructurales. El objetivo de este trabajo es brindar una clasificación clara y completa de todos los sistemas de aislación y control de vibraciones existentes hasta al momento, además de una descripción de los mismos y sus principales campos de aplicación. La definición de los sistemas incluye gráficos, características y ejemplos de estructuras

  17. Fussy control for the operation of an electric energy generation system based in type PEM fuel cells; Control difuso para la operacion de un sistema de generacion de energia electrica basado en celdas de combustible tipo PEM

    Energy Technology Data Exchange (ETDEWEB)

    Vazquez Roman, Miguel

    2004-10-15

    In this work, the design of a control system with fuzzy PID controllers is reported. It combines the techniques of multimode control and gain scheduling as well as the design of a compensator that will reduce the interaction effects among control loops in a multivariable system. The simulated system is based on a non-lineal mathematical model. Its validity range supports up to 1440 watts, for a nominal design of 1 KW power. To carry out the fuzzy PID Controller's design, firstly the PID conventional controllers were designed for three operating points of power demand: 0 W, 500 W and 1000 W. The methodology adopted for the determination of the conventional PID controller's parameters was poles cancellation. This methodology demanded the lineal identification of the process for the three mentioned operating points: low, medium and high power. With the information obtained from the adjusted conventional controllers in the three operating points, the design of fuzzy PID controllers based on the TSK system was achieved. For this work, this method is equivalent to the technique of gain scheduling since only conventional PID controllers with the same structure are used. In addition, a control scheme using a compensator that had the function of reducing the interaction effects among the control loops was designed. The compensator was located between the controller and the plant and only introduces compensation factors among control signals, maintaining the direct path of the control loop in the original control scheme. Several tests of the whole operating range, in order to make a performance analysis of both the conventional PID controller and the fuzzy PID controller were carried out, introducing step form signals in the power demand. The performance of the generation system was validated as a function of an error based index minimization as well as on the actuator control signal shape. The dynamic coupling degree among the control loops was analyzed, as well

  18. Control óptimo y robusto H∞ de sistemas no lineales aplicaciones a sistemas electromecánicos

    OpenAIRE

    Vivas Venegas, Carlos

    2004-01-01

    La teoría de control automático ha experimentado un notable desarrollo en los últimos tiempos especialmente en el campo de los sistemas no lineales. Son aportaciones relativamente recientes los paradigmas de control basados en pasividad, teoría de sistema

  19. Study of an intelligent system for wells elevation and petroliferous processes control; Estudo de um sistema inteligente para elevacao de pocos e controle de processos petroliferos

    Energy Technology Data Exchange (ETDEWEB)

    Patricio, Antonio Rodrigues

    1996-11-01

    The petroleum production problems were studied by means of an integrated process evaluation of a rod pumping well, a gas lift well and a process until for produced fluids. Using the artificial intelligent concepts as fuzzy logic and neural systems is presented SIEP, An Intelligent for Production Lift and Process Control, aimed to do the integrated management of the petroleum production process. (author)

  20. Microcomputer based system to control the load of a capacitor array in the TJ-1 Tokamak; Sistema de control de carga de condensadores del TJ-1

    Energy Technology Data Exchange (ETDEWEB)

    Alberdi, J.; Asenjo, L.; Sanz, J.A.

    1990-12-31

    The power to create the magnetic field in the TJ-1 TOKAMAK is provide by an array of 16 capacitor sets. The total capacity of this array is 8.1F. This work describes a computer system based on the Motorola M-6800 microprocessor which controls the load of the capacitor set-and stablishes the conditions for the reactor trigger. (author)

  1. Microcomputer based system to control the load of a capacitor array in the TJ-1 Tokamak. Sistema de control de carga de condensadores del TJ-1

    Energy Technology Data Exchange (ETDEWEB)

    Alberdi, J.; Asenjo, L.; Sanz, J.A.

    1990-01-01

    The power to create the magnetic field in the TJ-1 TOKAMAK is provide by an array of 16 capacitor sets. The total capacity of this array is 8.1F. This work describes a computer system based on the Motorola M-6800 microprocessor which controls the load of the capacitor set-and stablishes the conditions for the reactor trigger. (author)

  2. Microcomputer Based System to control the Load of a Capacitor Array in the TJ-1 Tokamak; Sistema de Control de Carga de Condensadores del TJ-1

    Energy Technology Data Exchange (ETDEWEB)

    Alberdi, J; Asenso, L; Sanz, J A

    1990-07-01

    The power to create the magnetic fields in the TJ-1 Tokamak is provides by an array of 16 capacitor sets. The total capacity of this array is 8. 1F. This work describes a computer system based on the Motorola M-6800 micro- processor which controls the load of the capacitor set and stablished the conditions for the reactor trigger. (Author)

  3. Intelligent system for control and automation of natural gas distribution operation; Sistema inteligente de controle e automacao da operacao de distribuicao de gas natural

    Energy Technology Data Exchange (ETDEWEB)

    Scucuglia, Jose W.; Souza, Celso C. [Universidade para o Desenvolvimento do Estado e da Regiao do Pantanal (UNIDERP), Campo Grande, MS (Brazil). Curso de Engenharia Eletrica; Patricio, Cristian M.M.M.; Cruz, Lauro C.; Reis, Antonio M.; Cortez, Marco A.A.; Maldonado, Waldemar; Rosa, Willian A. [Universidade para o Desenvolvimento do Estado e da Regiao do Pantanal (UNIDERP), Campo Grande, MS (Brazil). Nucleo de Energia, Automacao e Controle; Teixeira, Marcelo C.M. [UNESP, Ilha Solteira, SP (Brazil). Faculdade de Engenharia Eletrica; Carrasco, Benjamim [PETROBRAS, Rio de Janeiro, RJ (Brazil)

    2004-07-01

    The present work has as objective to present the development of a dedicated intelligent system to the operation of natural gas distribution. The system adds tools of project, simulation, supervision and control of the flow of natural gas in networks distribution, and is composed of hardware and intelligent software. The developed software possess friendly graphical interface, so that the operator composing visually the distribution network automatically, composes a mathematical model formed by a set of differential equations, being solved by the Newton-Raphson method. This tool of simulation allows, in function of network topology, to get through simulation the conditions gas flow in each point of the loop flow. The micro controlled hardware for acquisition of the data in real time and control of valves was developed. The hardware possesses flexible communication (Radio Frequency, Ethernet and Optical Fiber), intelligence for decision taking and auto test of its proper functioning, so that guarantee security in the operations. An implanted neural system in software propitiates the control monitoring of the characteristics operation and conditions of leak with loss of load, identifying inclusive the place of this leak along of the duct. A system with national technology was gotten, of low cost and high added technological value. (author)

  4. Aplicación de algoritmos de control clásico, adaptable y robusto a sistemas dinámicos de parámetros variables; Classic, adaptable and robust control algorithm application, to variant parameter dynamic system

    Directory of Open Access Journals (Sweden)

    Orlando Regalón Anias

    2012-11-01

    Full Text Available Existen múltiples sistemas dinámicos cuyos modelos matemáticos se caracterizan por ser de primer orden y parámetros variables con el tiempo. En estos casos las herramientas clásicas no siempre logran un sistema decontrol que sea estable, posea un buen desempeño dinámico y rechace adecuadamente las perturbaciones, cuando el modelo de la planta se desvía del nominal, para el cual se realizó el diseño.En este trabajo se evalúa el comportamiento de tres estrategias de control en presencia de variación de parámetros. Estas son: control clásico, control adaptable y control robusto. Se realiza un estudio comparativo de las mismas en cuanto a complejidad del diseño, costo computacional de la implementación y sensibilidad ante variaciones en los parámetros y/o presencia de disturbios. Se llega a conclusiones que permiten disponer de criterios para la elección más adecuada, en dependencia de los requerimientos dinámicos que la aplicación demande, así como de los medios técnicos de que se disponga.  Many dynamic systems have first order mathematic models, with time variable parameters. In these cases, the classical tools do not satisfy at all control system stability, good performance and perturbation rejection, when the plant model differs from the nominal one, for which the controller was designed.In this article, three control strategies are evaluated in parameter variations and disturbance presence. The strategies are the followings: classical control, adaptive control and robust control. A comparative study is carried out, taking into account the design complexity, the computational cost and the sensitivity. The obtained conclusions helps to provide the criterion to choose the mostadequate control strategy, according to the necessary dynamic, as well as the available technical means.

  5. Implementation of the fuzzy theory in control of alternative energy generation system; Aplicacao da teoria fuzzy no controle de sistemas de geracao de energias alternativas

    Energy Technology Data Exchange (ETDEWEB)

    Caneppele, Fernando de Lima [Universidade Estadual Paulista (FCA/UNESP), Botucatu, SP (Brazil). Fac. de Ciencias Agronomicas. Curso de Pos-Graduacao em Energia na Agricultura], E-mail: fernando@itapeva.unesp.br; Seraphim, Odivaldo Jose [Universidade Estadual Paulista (FCA/UNESP), Botucatu, SP (Brazil). Fac. de Ciencias Agronomicas. Dept. de Engenharia Rural], E-mail: seraphim@fca.unesp.br

    2010-07-01

    This paper presents the application and use of a methodology based on fuzzy theory and simulates its use in intelligent control of a hybrid system for generating electricity, using solar energy, photovoltaic and wind. When using a fuzzy control system, it reached the point of maximum generation of energy, thus shifting all energy generated from the alternative sources-solar photovoltaic and wind, cargo and / or batteries when its use not immediately. The model uses three variables used for entry, which are: wind speed, solar radiation and loading the bank of batteries. For output variable has to choose which of the batteries of the battery bank is charged. For the simulations of this work is used MATLAB software. In this environment mathematical computational are analyzed and simulated all mathematical modeling, rules and other variables in the system described fuzzy. This model can be used in a system of control of hybrid systems for generating energy, providing the best use of energy sources, sun and wind, so we can extract the maximum energy possible these alternative sources without any prejudice to the environment. (author)

  6. Functional utilization of control and digital protection systems in distribution substations; Aproveitamento funcional de sistemas de controle e protecao digitais em subestacoes de distribuicao

    Energy Technology Data Exchange (ETDEWEB)

    Brittes, Jose Luiz Pereira

    1996-07-01

    The application of Digital Protection and Control Systems (DPCS) in Utilities substations is a fundamental part for their Information System. Technological progress in Telematics provides nowadays, the implementation of open digital systems. But it is the wide exploitation of its potentiality that will be one of the survival factor in the competitive and multi-affair environment dictated by the new worldwide economical order. This exploitation is carried out in three levels inside the substation: at bay level, with inherent technological benefits, such as more efficient and reliable protection, data acquisition and registration, and smart control; at central level (substation), by the implantation of automatics with enormous operational and management profits; and a remote level, to whom DPCS's transpire like a very sophisticated large frame remote terminal units. (author)

  7. Functional utilization of control and digital protection systems in distribution substations; Aproveitamento funcional de sistemas de controle e protecao digitais em subestacoes de distribuicao

    Energy Technology Data Exchange (ETDEWEB)

    Brittes, Jose Luiz Pereira

    1996-07-01

    The application of Digital Protection and Control Systems (DPCS) in Utilities substations is a fundamental part for their Information System. Technological progress in Telematics provides nowadays, the implementation of open digital systems. But it is the wide exploitation of its potentiality that will be one of the survival factor in the competitive and multi-affair environment dictated by the new worldwide economical order. This exploitation is carried out in three levels inside the substation: at bay level, with inherent technological benefits, such as more efficient and reliable protection, data acquisition and registration, and smart control; at central level (substation), by the implantation of automatics with enormous operational and management profits; and a remote level, to whom DPCS's transpire like a very sophisticated large frame remote terminal units. (author)

  8. Sistemas de control de malezas en maiz (Zea mays L.: efecto de metodos de control, densidad y distribucion del cultivo Weed control systems in corn: effects of control methods, density and plant distribution

    Directory of Open Access Journals (Sweden)

    G. Martinez

    1982-12-01

    Full Text Available Con el objetivo de integrar diferentes prácticas culturales en un sistema de control de malezas en maíz, se instaló un ensayo en el Campo Experimental de la Universidad Autónoma Chapingo (México (2250 msnm, precipitación media anual 550 mm, suelo franco, 1.7% M.O. bajo condiciones de secano, en donde se evaluaron dos densidades (44.400 y 66.600 pl/ha, dos distribuciones (normal y equidistante y siete métodos de control de malezas (cyanazine + alachlor (1,2 + 1,92 kg/ha, atrazine + alachlor (1,2 + 1,44 kg/ha, un escarda, dos escardas, testigo siempre desmalezado, testigo siempre desmalezado + dos escardas y testigo siempre enmalezado. Las principales malezas presentes fueron: quelite (Amaranthus sp., perlilla (Lopezia mexicana Jacq., rosilla chita (Galinsoga parviflora Cav., acahual (Encelia mexicana Mart., Sporobulus poiretti (Roem, et Sch. Hichc. y fresadilla (Digitaria sanguinalis (L. Scop.. El aumento de la densidad de siembra no se reflejó en el control de malezas, incidencia de enfermedades, crescimiento vegetativo y reproductivo del cultivo. La distribución equidistante aparejó un mejor control de malezas, en relación a la distribución normal, pero la incidencia de enfermedades fue mayor, lo que quizá pudo haber determinado la ausencia de diferencias en crecimiento vegetativo, un menor número de mazorcas/ha y consecuentemente la ausencia de respuesta en rendimiento de grano. De los tratamientos químicos, atrazine + alachlor tuvo un comportamiento superior a cyanazine + alachlor, en control de malezas, aunque sólo fue detectable estadisticamente en las evaluaciones. No hubo diferencia entre ambos en la incidencia de enfermedades, ni en su efecto sobre el cultivo. aunque el rendimiento de cyanazine + alachlor fue ligeramente inferior. Los métodos químicos fueron superiores a los mecánicos en control de malezas, pero no difirie -ron en la incidencia de enfermedades ni en los parámetros de desarrollo del cultivo. La

  9. SISTEMA DE CONTROL INTELIGENTE PARA UN GRUPO DE ELEVADORES

    Directory of Open Access Journals (Sweden)

    Andrés Enrique Rosso Mateus

    2008-01-01

    Full Text Available En este artículo se trata el problema del tráfico vertical en edificios de gran altura y se describe el análisis, diseño y evaluación de un sistema de control para un grupo elevadores que busca mejorar el desempeño respecto a un sistema de control tradicional. El controlador propuesto busca asignar de una forma inteligente las llamadas que se generan a los ascensores que hacen parte del grupo, el desempeño del sistema se traduce en una reducción de los tiempos de servicio y de la energía que invierte el sistema. El controlador propuesto está basado en lógica difusa y las reglas de inferencia expresan el conocimiento de un experto orientado hacia la obtención de los objetivos mencionados. El controlador inteligente se evalúa en un simulador gráfico desarrollado para este fin, este simulador permite ingresar parámetros de configuración para que se adapte y represente una edificación real. Se corrieron dos simulaciones, una usando un controlador convencional y otra usando el controlador inteligente, esto con el fin de comparar su desempeño y cuantificar valores como tiempo de esperar de los usuarios y energía consumida por el sistema.

  10. Supervision and control system for greenhouses using wireless network sensors; Sistema de supervisao e controle para casas de vegetacao empregando rede 'wireless' de sensores

    Energy Technology Data Exchange (ETDEWEB)

    Fontes, Ivo Reis; Cagnon, Jose Angelo; Rodrigues, Ricardo Martini [Universidade Estadual Paulista (UNESP), Bauru, SP (Brazil). Fac. de Engenharia. Dept. de Engenharia Eletrica], e-mail: ivo@feb.unesp.br, e-mail: martini@feb.unesp.br, e-mail: jacagnon@feb.unesp.br

    2004-07-01

    The present work had as objective the configuration of a supervision and control system for greenhouses applications using a system of data collection of control parameters through a wireless communication network. In agreement with the adopted methodology, its development was accomplished in three different phases. Initially the hardware modules for a Sensors Unit, a Data Concentrator Unit and a capacitive type soil moisture sensor were developed. Soon afterwards an application was configured through a SCADA supervision and control program, the Ellipse PRO, dedicated to the supervision and control of a green house. In the final phase the necessary data were collected for the training of an artificial neural network that is integral part of the humidity sensor. The Sensors Unit and the Data Concentrator Unit were developed starting from microcontrollers of low consumption and high performance and presents excellent cost/benefit relationship. These units are used in the acquisition and data storage of in comings from several sensors applied in the installation. In order to eliminate the inconveniences of a system that uses nets of electric cables connections links of RF was used, with pattern of message of the protocol MODBUS/RTU, for the communication among these units. The application developed through the Ellipse FOR is composed of a group of screens that represents in a virtual way the complete green house environment. Through these screens the operator can alter the operation state of each one of the elements involved in the irrigation and climatization control process. According the cost characteristics, operation flexibility and existent functionality this system represents a solution economically viable in the automation green houses. It can be affirmed that this configuration represents an innovative solution and that can contribute in much for the improvement of cultivated species as well as to provide the necessary ways for the rational use of the

  11. Envejecimiento del sistema cardiovascular Cardiovascular system aging

    Directory of Open Access Journals (Sweden)

    José M Ocampo

    2005-08-01

    Full Text Available El envejecimiento del sistema cardiovascular está asociado con un número característico de cambios a nivel bioquímico, histológico y morfológico. Sin embargo, no todas las modificaciones presentadas se asocian con deterioro en la función. Entre los cambios a nivel cardiaco se tienen: disminución en el número de miocitos y en las células del sistema de conducción cardiaca, desarrollo de fibrosis, cambios en el transporte de calcio a través de las membranas y disminución del cronotropismo, inotropismo y lusitropismo mediados por estímulo b-adrenérgico. A nivel vascular, hay incremento en la rigidez de la pared de las arterias, con aumento en la velocidad de la onda de pulso, disfunción endotelial y disminución de la vasodilatación mediada por estímulo b-adrenérgico. Durante el reposo el sistema cardiovascular es capaz de desarrollar mecanismos adaptativos eficientes, pero en situaciones de estrés como el ejercicio, los cambios asociados con el envejecimiento se hacen evidentes ya que está disminuida la capacidad para obtener la frecuencia cardiaca máxima, está incrementada la postcarga y hay disminución de la contractilidad intrínseca. Por lo anterior, los ancianos deben utilizar al máximo el mecanismo de Frank-Starling para mantener el gasto cardiaco. Los cambios estructurales y funcionales asociados con el envejecimiento cardiovascular, disminuyen de forma significativa el umbral en el cual las enfermedades cardiacas llegan a ser evidentes, y deben ser conocidos por el personal de salud encargado de cuidar a los ancianos.Cardiovascular aging is associated with characteristic biochemical, histological and morphological changes. Nevertheless, these changes are not necessarily associated to a deterioration in its function. Among the cardiac changes found, there is a reduction in the number of myocytes and of the cardiac conduction system cells, development of fibrosis, changes in the trans-membrane calcium transport and a

  12. Incorporation of the pressure control system to the classroom simulator; Incorporacion del sistema de control de presion al simulador de aula

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez J, J. [UNAM, Laboratorio de Analisis de Ingenieria de Reactores Nucleares, DEPFI, Campus Morelos, en IMTA Jiutepec, Morelos (Mexico)]. e-mail: shaqaul@hotmail.com

    2004-07-01

    In the nucleo electric centrals, the information systems, support for the decisions making and training are every day more complex and important. The present work is a contribution in this sense, specifically, it is part of a tool of training and analysis developed by the Laboratory of Analysis in Engineering of Nuclear Reactors (LAIRN) of the Faculty of Engineering of the UNAM that consists essentially of a simulator of the Laguna Verde Nucleo electric plant; the classroom simulator, understands the physical systems that compose to the power station and graphic interfaces for its operation and the analysis of results. The project of the classroom simulator is carried out in independent modules that are integrated to the total system as these they are developed and proven. The central objective of this work consists on the development, implementation and it proves of a model of the pressure control system according to the characteristics of the Nucleo electric plant of Laguna Verde, as well as the development of the mimic ones and unfolding necessary graphics to make its interactive operation from sensitive monitors to the tact. The pattern of the control system was developed using as tool the nuclear code of simulation RELAP/SCDAP, designed for the analysis of the types of nuclear reactors more common in occident, and it allows the typical maneuvers in the ways of start up, heating and operation to power, showing an appropriate behavior during the more common operational transitoriness. (Author)

  13. Control system of liquid effluents generated in treatment with I-131; Sistema de control de efluentes liquidos generados en el tratamiento con I-131

    Energy Technology Data Exchange (ETDEWEB)

    Garcia M, T.; Ruiz C, M. A.; Angeles C, A.; Ramirez S, R., E-mail: teodoro.garcia@inin.gob.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2015-09-15

    In recent years, nuclear medicine has developed greatly in our country and around the world. Techniques for both medical diagnosis and therapy have increased the use of radiopharmaceuticals, notably the I-131. In Mexico there are around 150 nuclear medicine establishments authorized by the Comision Nacional de Seguridad Nuclear y Salvaguardias. Most of these establishments do not have an appropriate facility for the treatment of radioactive liquid effluents, to ensure compliance with the concentration limits established in the regulations. The Instituto Nacional de Investigaciones Nucleares (ININ) developed and implemented successfully, a control system of radioactive effluents (named SACEL) from a nuclear medicine facility. This system ensures an effective compliance with regulations and also better management and control of these radioactive effluents. Calculations and design of SACEL were made with respect to I-131, because is one of the most commonly used in radiotherapy and medical diagnostics, besides its half-life is greater in relation to other radionuclides. SACEL is comprised of four storage tanks and decay and a fifth tank for measuring the concentration of I-131 and later discharge to the drain; these tanks are connected to an automated system that controls the effluents passage. The calculation to determine the volume of the tanks was carried out according to the demand that has the hospital, to the maximum activity being poured in effluents and time required to decay. In this paper the design and installation of SACEL system, in addition to functioning as a facility that enables the Hospital meet the required standards is presented. Dose calculations performed with MCNPX and the methodology used in the calibration of the detection system is also presented. (Author)

  14. Quality control procedures of dental diagnostic radiology systems; Elaboracao de um procedimento para controle de qualidade em sistemas de radiodiagnostico odontologico

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Paula Serra Sasaki

    2007-07-01

    This work presents quality control reference procedures for dental diagnostic radiology systems, following the recommendations of the Publication 453 of the Brazilian Health Ministry (PF453), to be applied in dental clinics, in order to achieve an improvement in the radiological image qualities and the patient dose reduction. All tests were applied in an intraoral X rays system, following the methodology developed and the requirements of the PF 453. In order to verify the best quality of the image in relation to the smaller exposition time an object test was also developed in this work. The use of this object allowed the reduction of the exposition time of 0.5 seconds, the maximum value of the linear region of the characteristic curve, for 0.2 seconds. The tested X rays system showed a very good agreement with the applied procedures, detaching the reduction of the skin entrance dose using the film-holding devices. However, the size of the field increased and exceeded the maximum value of 6 cm recommended in the standard. The importance of the quality control in dental diagnostic radiology systems is essential due to the constant use of X radiation in dental clinics. The PF453 recommends the frequency of at least two years for the constancy tests. However, it is suggested that the professional, surgeon-dentist, should be responsible for the internal control of the image quality obtained from the X rays device. This can be done through monthly exposures of the object test developed in this work. (author)

  15. Modernization of turbine control system and reactor control system in Almaraz 1 and 2; MOdernizacion de los sistemas de control de turbina y del reactor en Almaraz 1 y 2

    Energy Technology Data Exchange (ETDEWEB)

    Pulido, C.; Diez, J.; Carrasco, J. A.; Lopez, L.

    2005-07-01

    The replacement of the Turbine Control System and Reactor Control System are part of the Almaraz modernization program for the Instrumentation and Control. For these upgrades Almaraz has selected the Ovation Platform that provides open architecture and easy expansion to other systems, these platforms is highly used in many nuclear and thermal plants around the world. One of the main objective for this project were to minimize the impact on the installation and operation of the plant, for that reason the project is implemented in two phases, Turbine Control upgrade and Reactor Control upgrade. Another important objective was to increase the reliability of the control system making them fully fault tolerant to single failures. The turbine Control System has been installed in Units 1 and 2 while the Reactor Control System will be installed in 2006 and 2007 outages. (Author)

  16. Modification of the water-level control system at the Unit 12 of Los Azufres, Mich., geothermal field; Modificacion del sistema de control de nivel de agua en la Unidad 12 del campo geotermico de Los Azufres, Mich.

    Energy Technology Data Exchange (ETDEWEB)

    Tello Hinojosa, Raul; Aburto Huerta, S. Ramon; Mendoza Covarrubias, Hector M [Comision Federal de Electricidad, Gerencia de Proyectos Geotermoelectricos, Morelia, Michoacan (Mexico)]. E-mail: raul.tello@cfe.gob.mx

    2007-01-15

    Unit 12 of the Los Azufres, Mich., geothermal field is a binary cycle unit of 1.45 MW, installed at the pad of production well Az-22. There are two separators on this pad. One separates the mix extracted from well Az-22 and the other from adjacent wells. The separated brine from both separators is gathered in a horizontal tank and sent to Unit 12. The steam is sent to Unit 7, which generates 50 MW. Once some interference occurred affecting the power generation of Unit 7 when Unit 12 was off line. This was caused by the original flow arrangement and water-level control system. To avoid interference, a water-level control system was designed and installed in the separators. The system operates independently of Unit 12, with tanks in each separator connected by a pipe. Regulation of the water level is accomplished by three motor valves and a level sensor. To ensure permanent feeding of electrical power to the valves, an automatic system was installed from transmission lines of 23 and 115 kV. In case both lines fail, there is an uninterrupted power supply (UPS) unit. At the beginning of 2005, Unit 12 was again online with a modified water-level control system that has operated satisfactorily since then. Its short periods offline have not affected Unit 7. [Spanish] La Unidad 12 del campo geotermico de Los Azufres, Mich., es una unidad de ciclo binario de 1.45 MW, instalada en la plataforma del pozo productor Az-22. En esta plataforma hay dos separadores, uno de los cuales separa la mezcla extraida del pozo Az-22 y el otro la de varios pozos aledanos. El agua separada de ambos se concentra en un tanque horizontal y de este pasa a la Unidad 12, mientras que el vapor se envia a la Unidad 7, de 50 MW. Por el tipo de arreglo original de flujo y control de nivel de agua en los equipos, ocurrian interferencias que provocaban que cuando la Unidad 12 se disparaba se afectara la generacion en la Unidad 7. Para evitar esta interferencia se diseno e instalo un sistema de control de

  17. Integration of a platform based in field bus (profibus), for the development of process control systems; Integracion de una plataforma basada en bus de campo PROFIBUS, para el desarrollo de sistemas de control de procesos

    Energy Technology Data Exchange (ETDEWEB)

    Islas Perez, Eduardo; Arroyo Figueroa, Gustavo; Villavicencio Ramirez, Alejandro [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1994-03-01

    The integration of a computer platform for the process sequential control system development and validation of some processes of thermoelectric generation, which are constituted by operations of the logic-sequential type. The platform is composed of a process simulator, a sequence tester, a logic programmable controller, and an operational computer. All these elements are interconnected through a field bus type PROFIBUS (Process Field Bus) (Standard DIN 19245). This platform has been used for the elaboration and evaluation of the operational sequence and control of demineralization, reverse osmosis, and condensate polishing water treatment plants, which are simulated in a personal computer. [Espanol] Se presenta la integracion de una plataforma de computo para el desarrollo y validacion de sistemas de control secuencial de algunos procesos de generacion termoelectrica, los cuales estan constituidos por operaciones de tipo logico-secuencial. La plataforma esta compuesta por un simulador del proceso, un probador de secuencias, un controlador logico programable y una computadora de operacion. Todos estos elementos estan interconectados a traves de un bus de campo tipo PROFIBUS (Process Field Bus), (Estandar DIN 19245). Esta plataforma se ha utilizado para elaborar y validar la programacion de las secuencias de operacion y control de plantas de tratamiento de agua por desmineralizacion, osmosis inversa y pulidores de condensados, las cuales se tienen simuladas en una computadora personal

  18. A função de controle nos sistemas integrados de manufatura

    Directory of Open Access Journals (Sweden)

    Flavio Cesar F Fernandes

    1991-06-01

    Full Text Available Faz-se uma proposição de vários conceitos atinentes ao gerenciamento da produção, muitos dos quais são válidos também para os Sistemas de Manufatura Convencional, mas que estão aqui colocados dentro do contexto dos Sistemas Integrados de Manufatura (SIMs, que são os sistemas desenvolvidos sob a filosofia de fabricação CIM ('Computer Integrated Manufacturing = Manufatura Integrada por Computador. Mostra-se que a integração depende basicamente da função controle.Manufacturing integration is reviewed and various concepts and definitions founded in literature are presented for conventional and automated manufacturing systems. The survey emphasizes information system management and control importance in order to improve manufacturing functions integration.

  19. Control lineal robusto de sistemas no lineales diferencialmente planos

    Directory of Open Access Journals (Sweden)

    Hebertt Sira-Ramirez

    2011-01-01

    Full Text Available Resumen: En este trabajo se proponen controladores basados en observadores lineales para el control robusto de una clase amplia de sistemas no lineales conocidos como sistemas diferencialmente planos, sean estos monovariables o multivariables. Se establece primeramente el modelo dinámico entrada - salida plana, simplificándolo a un modelo de carácter no fenomenológico que solamente considera como elementos claves en el diseño del controlador el orden de integración del sistema y el factor de ganancia de entrada, en el caso monovariable, y, los órdenes de los subsistemas de integración de Kronecker y la matriz de ganancias del vector de entradas en el caso multivariable. El resto de las no linealidades, dependientes del estado o de naturaleza exógena, son consideradas, en general, como perturbaciones desconocidas pero acotadas que toman valores en el tiempo. Se demuestra que estas perturbaciones son algebraicamente observables, permitiendo su determinación aproximada mediante observadores lineales de orden arbitrario. Estos observadores, llamados observadores GPI, incluyen modelos internos que representan polinomios en el tiempo, cuya actualización es de índole automática, permitiendo aproximaciones arbitrariamente cercanas a las perturbaciones desconocidas. El diseño del controlador se reduce entonces a lograr la cancelación de las perturbaciones aditivas a la vez de imponer una dinámica lineal en lazo cerrado mediante realimentación de estados estimados, los cuales se obtienen directamente del mismo observador lineal propuesto. Se presenta un ejemplo de simulación que considera un sistema físico no lineal de complejidad reconocida. También se incluyen resultados experimentales sobre dos prototipos de laboratorio. Palabras Clave: Rechazo a perturbaciones, Realimentación lineal de salida, Sistemas linealizables, Observadores, Sistemas no lineales

  20. Organización del trabajo y dispositivos de control en el sector automotriz: el toyotismo como sistema complejo de racionalización Labour Structure and Control Devices in the Automotive Industry: The "toyotism" as a complex rationalization system

    Directory of Open Access Journals (Sweden)

    Diego Alvarez Newman

    2012-06-01

    Full Text Available El presente artículo pretende problematizar la concepción toyotista a partir de la descripción y el análisis del Sistema de Producción Toyota (SPT, sus principios y estrategias de aplicación. Entendemos al SPT como un sistema complejo de racionalización de la producción y de los trabajadores que opera mediante la aplicación de variados dispositivos de control técnico y social. El SPT postula ciertos principios básicos que apuntan a la mejora continua de la productividad y la calidad, poniendo en juego un andamiaje estratégico para intervenir sobre el control del tiempo y del espacio en la fábrica y sobre el control de los ritmos, movimientos y valores de los trabajadores. Estos dispositivos no operan solo como reguladores de la producción y la productividad sino que además operan como dispositivos de flexibilización de la fuerza de trabajo y dispositivos de cooptación sindical para minimizar la conflictividad laboral. Formar para contar con trabajadores involucrados con los objetivos de la empresa y con un sindicato que adhiera a la filosofía Toyota constituye un fuerte factor de productividad en el sentido en que no se verá afectado el circuito de la mejora continua.The following article intends to examine the concept of "toyotism" based on the description and analysis of the Toyota Production System (TPS and its´ principles and strategies application. We infer the TPS as a complex system which rationalizes both the production and the workers. This system works through the implementation of diverse technical and social devices. The TPS postulates certain basic principles aiming a continuous productivity and quality improvement, applying a strategic configuration to intervene in the control of the factory´s time and space as well as in the regulation of rhythms, movements and worker´s values. These devices do not only operate as production and productivity watchers, but also function as workforce flexibilization and

  1. Medição e controle do tempo de atravessamento em um sistema de manufatura Measurement and control of lead-time in a manufacturing system

    Directory of Open Access Journals (Sweden)

    Miguel Afonso Sellitto

    2008-04-01

    Full Text Available Este artigo apresenta um método para a medição do tempo de atravessamento e do inventário em processo em manufatura. A medição foi usada em processo de controle organizacional de manufatura, cuja variável controlada foi o tempo de atravessamento de ordens. Tal controle pode ser útil em estratégias de manufatura em que a competição é baseada no uso do tempo, a TBC (time-based competition. Apresentou-se o método de medição, que inclui elementos da teoria das filas, e considerações para a simplificação de arranjos produtivos de manufatura. Para testar e refinar o método, estudou-se um caso em manufatura calçadista. Foram coletados dados de remessas e obtido, por análise estatística e simulação computacional, o comportamento da variável aleatória tempo de atravessamento de remessas. Como a medição foi inferior ao objetivo de desempenho, partiu-se para o controle, fazendo um diagnóstico que apontou efeitos indesejáveis observados que foram endereçados por ações corretivas implementadas. Para verificar a eficácia das ações, nova coleta foi feita. Desta vez, o objetivo de desempenho das entregas foi atendido, fechando um ciclo de controle. Os resultados foram discutidos, chegando-se a conclusões e alternativas de continuidade.This paper presents a method for the measurement of the lead-time and work-in-process in manufacturing. The measurement was used in an organizational control process in manufacturing, in which the controlled variate was the order lead-time. This kind of control can be useful in manufacture strategies formulated to compete in TBC (time-based competition. We presented the method, who includes elements from the queuing theory, and concerns about simplifying complex manufacturing arrays, in order to facilitate the analysis. In order to test and refine the method, we studied a case in a footwear manufacture system. We collected data from orders and, by statistical techniques and computational

  2. Background and evolution of solar control systems in the architecture; Antecedentes y evolucion de los sistemas de control solar en la arquitectura

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez Viqueira, Manuel; Fuentes Freixanet Victor [Universidad Autonoma Metropolitana, Mexico, D.F. (Mexico)

    2000-07-01

    This paper is a reflection on the tradition and evolution of the use of solar control systems as a solution to the architectonic problem that arises from the solar radiation excess in the inhabitable spaces and its comfort conditions. The study has been structured from a historical-geographic vision of the architecture, showing the universality and the rationality of the solutions before certain environmental and climatologic conditions. That allows to arrive to the conclusion that similar architectonic solutions, as much in the functional aspect as in which refers to the use of the materials, that might not be related among them, and be independent in the space and time. To seat at the shade of a tree in a warm and sunned day, we quickly associated it to the pleasantness sensation, be this in a climate: dry, humid or template. This is the way we must conceive the solar control, as a tool for the bioclimatic design where we look for an increasing of the comfort sensation, in the architectonic spaces, with an optimization of the energy resources. In general terms the solar control devices, (of solarization) can be grouped in those of architectonic type, that is to say, those that are integrated and comprise the same architecture, and those non-architectonic, that is to say, those that do not comprise in it in a direct way. On the basis of this characterization we will enunciate the main devices of each one of the typologies or groups. [Spanish] Este trabajo es una reflexion sobre la tradicion y evolucion del uso de dispositivos de control solar como solucion al problema arquitectonico que surge del exceso de radiacion solar en los espacios habitables y las condiciones de confort en los mismos. El estudio se ha estructurado a partir de una vision historico-geografica de la arquitectura, mostrando la universalidad y la racionalidad de las soluciones ante determinadas condiciones ambientales y climatologicas. Lo que permite llegar a la conclusion de que soluciones

  3. Avaliação de Desempenho de Controllers em Empresas com Sistemas de Remuneração por Recompensa = Controllers Performance Evaluation in Companies With Reward Compensation Systems

    Directory of Open Access Journals (Sweden)

    Iago França Lopes

    2015-12-01

    Full Text Available Este estudo objetiva identificar a forma de avaliação de desempenho utilizada para os controllers em empresas que adotam sistemas de remuneração por recompensa. Foi realizada pesquisa descritiva a partir de um levantamento, tendo como população as 58 empresas localizadas na cidade de Curitiba/PR que participaram do Núcleo de Apoio à Gestão da Inovação (NAGI, programa patrocinado pela Financiadora de Estudos e Projetos (FINEP e pelo Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq, executado no Estado do Paraná pelo Serviço Nacional de Aprendizagem Industrial (SENAI. A amostra por acessibilidade compõe-se dos respondentes do questionário e aos dados coletados foi aplicada estatística descritiva. Os resultados da pesquisa evidenciam características da avaliação de desempenho das empresas, composição da remuneração dos controllers e sistemática de remuneração variável dos controllers. Conclui-se que a forma de avaliação de desempenho mais praticada pelas empresas da amostra que adotam sistema de remuneração variável é a participação nos lucros, e que a motivação para a sua implementação sob o ponto de vista dos controllers é indiferente. Esse resultado instiga pesquisas para averiguar em que medida a sistemática de avaliação de desempenho pode contribuir à minimização do conflito de agência, na perspectiva da liberdade dos controllers em termos de subordinação hierárquica.The goal of this study is to identify the method of performance evaluation used for the controllers in companies that adopt reward compensation systems. Descriptive study was conducted with a survey, having as population the 58 companies located in Curitiba/PR members of the Center of Support to Innovation Management (Núcleo de Apoio a Gestão da Inovação - NAGI, program sponsored by the Financier of Studies and Projects (Financiadora de Estudos e Projetos - FINEP and the National Council for Scientific and

  4. Study of the characteristic response of the pressure control system for the design parameters of the new turbine control system, MARK VI, in Cofrentes Nuclear Power Plant; Resultados del estudio de la respuesta caracteristica del sistema de control de presion para el Proyecto OCP-4300 Nuevo Sistema de Control de Turbina MARK VI en la C.N. Cofrentes

    Energy Technology Data Exchange (ETDEWEB)

    Palomo anaya, M. J.; Ruiz Bueno, G.; Mora, J. A.; Vaquer, J. I.; Bucho, L.; Lopez, B.

    2010-07-01

    This paper presents the results of the study of the characteristic response of the ancient Pressure and Turbine Control System for the OCP-4300 Project in the Cofrentes Nuclear Power Plant, made by Titania Servicios Tecnologicos in collaboration with the Institute for Industrial, Radiophysical and Environmental Safety. This work was done as one of the preliminary work necessary for replacing the old control system by Mark VI.

  5. Energy efficiency in speed control system for induction motors; Eficiencia energetica em sistema de controle de velocidade em motores de inducao

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Arlete Vieira da; Ribeiro, Elisangela do Nascimento; Tenorio, Iana Cavalcanti; Horta, Mario Marcos Brito [Centro Universitario de Belo Horizonte (UnBH), MG (Brazil)], e-mails: arlete.silva@prof.unibh.br, nr.elisangela@gmail.com, ianactenorio@gmail.com, mario_bhorta@yahoo.com.br

    2011-07-01

    This work has as objective the study of energy efficiency of induction motors fed by frequency inverters, since this is a practical resource that has progressively allowed the replacement of mechanical speed reducers. In this work the speed control of induction motors of the squirrel cage has steeped through the frequency inverters using scalar control. Induction motors are frequently used in industrial applications due to its simple construction, its low maintenance and reduced in size. It was possible through tests made at UNI-BH Electrical Engineering laboratory to obtain satisfactory results regarding the performance of the inverter CFW08 (WEG), speed control of induction motor. (author)

  6. Control del cáncer cervicouterino en Colombia: la perspectiva de los actores del sistema de salud Control of cervical cancer in Colombia: the perspective of the health system

    Directory of Open Access Journals (Sweden)

    Carolina Wiesner-Ceballos

    2009-01-01

    tamizaje. Se requiere un programa integrado y mejor organizado en el que participen los diferentes actores del sistema de salud.OBJECTIVES: To characterize the health system stakeholder's perspective on the basics of the political, economic, and sanitary context, as well as the ways in which control activities are being realized in four of Colombia's health departments. METHODS: This was a qualitative study of four Colombian health departments chosen for their differing cervical cancer mortality rates and their planned disease control efforts (Boyacá, Caldas, Magdalena, and Tolima. Semistructured interviews were conducted of health care managers, insurance coordinators, and public and private health institutions at the departmental and municipals levels. Focus groups comprised of professionals from health insurance companies and health care services providers were convened. Data analysis was based on the grounded theory with open codes related to the roles of health care managers, insurance companies, and heath care services provided. The technical reports were compared to the testimonies of interviewees. RESULTS: Thirty-eight interviews and 14 focus groups (70.9% response rate were conducted and 12 technical reports reviewed. Cervical cancer is not perceived to be a public health priority. Interest centers on the flow of financial resources within the health system. Findings indicated unsatisfactory communication among the stakeholders and no consensus on the subject. Planning is limited to meeting the status quo. Staffing is inadequate. Cases with positive outcomes are lost to follow-up due to the fragmentation that results from affiliation with different health care systems. CONCLUSIONS: The financial situation, normative planning, and the challenges of decentralization affect the skill-building, at-risk coverage, and the control activities needed for effective screening programs. What is needed is an integrated, more efficiently organized program in which all the

  7. Dosimetric study for characterization of a postal system of quality control in brachytherapy; Estudo dosimetrico para caracterizacao de um sistema postal de controle de qualidade em braquiterapia

    Energy Technology Data Exchange (ETDEWEB)

    Alves, Victor Gabriel Leandro, E-mail: vgalves@inca.gov.b [Instituto Nacional do Cancer (INCa), Rio de Janeiro, RJ (Brazil); Queiroz Filho, Pedro Pacheco de; Santos, Denison de Souza, E-mail: queiroz@ird.gov.b, E-mail: santosd@ird.gov.b [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Begalli, Marcia, E-mail: begalli@uerj.b [Universidade do Estado do Rio de Janeiro (IF/UERJ), RJ (Brazil). Inst. de Fisica

    2009-07-01

    This work presents a dosimetric study of a postal system, to be developed for measurements of brachytherapy. It was projected a PMMA phantom with orifices for insertion of the high dose {sup 192}Ir source and the T L dosemeters. The system was characterized with using of Monte Carlo simulations, using the dosimetric magnitudes defined at the T G-43 of AAPM, as function of radial dose g(f)

  8. Renewal of the control terminals of the criticality alarm system of the factory; Renovacion de los terminales de control del sistema de alarma de criticidad de la fabrica

    Energy Technology Data Exchange (ETDEWEB)

    Escandon Ortiz, E.; Dorado Sierra, P.; Ortiz Trujillo, D.; Zurron Cifuentes, O.; Lopez Marquez, J.

    2011-07-01

    The new terminals to be installed are based on computer servers with eDNA management software and have the same features as the existing, but with the advantage of a greater dynamism and flexibility in obtaining and storage of historical data from the modules of acquisition of data (DAM) system.

  9. Evolution of the process control system of casting 2 of the USIMINAS; Evolucao do sistema de controle de processo da aciaria 2 da USIMINAS

    Energy Technology Data Exchange (ETDEWEB)

    Belumat, Guilherme A.; Barao, Celso D.; Etrusco, Getulio S. P. [USIMINAS, Ipatinga, MG (Brazil). Centro de Pesquisas

    1984-12-31

    The technical and operational evolution of the automation system of the refining process at the USIMINAS Steel making Plant Number 2 is presented. The main changes in the operational standards are discussed and the results obtained after one year of utilization are evaluated. (author). 5 figs., 3 tabs., 4 refs.

  10. Implementation of a quality control protocol in a radiotherapy planning system; Implementacion de un protocolo de control de calidad en un sistema de planificacion de radioterapia

    Energy Technology Data Exchange (ETDEWEB)

    Condori, P.; Paucar, R. [Clinica San Pablo, Lima (Peru). Servicio de Radioterapia

    2004-07-01

    Due to the impossibility of each particular case analysis and taking as example the spanish protocol (Under revision), necessary tests have been performed for the verification of the calculations for the Multidata planning system, including: calculation algorithms, reconstruction of the rectangular beams, light modulators, irregular fields, fields summation, weights, normalization, prescription and calculation of UM, for the teletherapy planning.

  11. Digital controlled pulsed electric system of the ETE tokamak. First report; Sistema eletrico pulsado com controle digital do Tokamak ETE (experimento Tokamak esferico). Primeiro relatorio

    Energy Technology Data Exchange (ETDEWEB)

    Barbosa, Luis Felipe de F.P.W.; Del Bosco, Edson

    1998-12-31

    This reports presents a summary on the thermonuclear fusion and application for energy supply purposes. The tokamak device operation and the magnetic field production systems are described. The ETE tokamak is a small aspect ratio device designed for plasma physics and thermonuclear fusion studies, which presently is under construction at the Laboratorio Associado de Plasma (LAP), Instituto Nacional de Pesquisas Espaciais (INPE) - S.J. dos Campos - S. Paulo. (author) 55 refs., 40 figs.

  12. Digital controlled pulsed electric system of the ETE tokamak. First report; Sistema eletrico pulsado com controle digital do Tokamak ETE (experimento Tokamak esferico). Primeiro relatorio

    Energy Technology Data Exchange (ETDEWEB)

    Barbosa, Luis Felipe de F.P.W.; Del Bosco, Edson

    1997-12-31

    This reports presents a summary on the thermonuclear fusion and application for energy supply purposes. The tokamak device operation and the magnetic field production systems are described. The ETE tokamak is a small aspect ratio device designed for plasma physics and thermonuclear fusion studies, which presently is under construction at the Laboratorio Associado de Plasma (LAP), Instituto Nacional de Pesquisas Espaciais (INPE) - S.J. dos Campos - S. Paulo. (author) 55 refs., 40 figs.

  13. Uso do sistema de controle gerencial e desempenho: um estudo em empresas brasileiras sob a perspectiva da resources-based view Management control system use and performance: a study in brazilian companies using resources-based view

    Directory of Open Access Journals (Sweden)

    José Carlos Tiomatsu Oyadomari

    2011-08-01

    Full Text Available O propósito deste estudo de natureza empírico-teórica foi entender os relacionamentos entre o Uso do Sistema de Controle Gerencial; o desenvolvimento de Competências Organizacionais e Desempenho usando o framework proposto por Henri 2006 . A dimensão Uso do Sistema de Controle Gerencial proposta por Simons 1995; 2000 em Uso Diagnóstico e Uso Interativo é pouco estudada no Brasil; contrariamente à literatura internacional; embora esta tenha mostrado alguns resultados que são contraditórios. A pesquisa foi realizada em 2008; por meio de um survey em uma amostra de 104 empresas constantes da relação das 1.000 Maiores Empresas da Revista Exame. Com a aplicação da Modelagem de Equação Estrutural; os principais resultados mostram que não existem evidências de relacionamento negativo entre o Uso Diagnóstico e o desenvolvimento de Competências Organizacionais; o que contradiz os resultados de Henri 2006 . Também se identificou que o Uso Interativo influencia positivamente as competências Aprendizagem Organizacional e Orientação para Mercado e estas influenciam positivamente o Desempenho medido por auto-avaliação . O estudo contribui para a literatura nacional ao abordar um tema que integra Contabilidade Gerencial e Estratégia; e também por operacionalizar o construto Tensões Dinâmicas. O resultado contribui para a prática ao mostrar que as empresas devem continuar usando diagnosticamente o Controle Gerencial; pois este auxilia a organização a corrigir desvios; ao mesmo tempo que recomenda a utilização da forma interativa para ativar as competências organizacionais.The purpose of this study was to understand the relationship among Management Control System Use, development of company's organizational competences and performance using Henri's framework (HENRI, 2006. The dimension Use of Management Control System, proposed by Simons (1995, 2000 in diagnostic use and interactive use is scarcely studied in Brazil, in spite

  14. Sposobnost opstanka informacionih sistema / Survivability of information systems

    Directory of Open Access Journals (Sweden)

    Boško Rodić

    2005-03-01

    Full Text Available U radu je opisan značaj i trend razvoja informacionih sistema u savremenom društvu, a definisani su i drugi značajni pojmovi radi boljeg razumevanja problema. Prikazana su i četiri aspekta rešenja sposobnosti opstanka informacionih sistema koje predlaže Computer Emergency Response Team (CERT. / The article deals with importance and trend of information systems in modern society. In the article are defined, beside survivability, other relevant ideas necessary for better understanding of the problems. Also, in the article are illustrated four aspects of information system survivability solution by Computer Emergency Response Team (CERT.

  15. Control system modernization of a turbo-gas unit of CFE in the Comarca Lagunera; Modernizacion del sistema de control de una unidad turbogas de la CFE en la Comarca Lagunera

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez P, Marino; De Lara J, Salvador; Hernandez Muniz, Alfredo [Industria SIGRAMA, Cuernavaca, Morelos (Mexico); Garcia Cabello, Raymundo [Comision Federal de Electricidad (Mexico)

    2004-07-01

    At the present time, the turbo-gas units (TGU) make an important contribution in the development and growth of the national power sector, since this type of units pertaining to the Comision Federal de Electricidad (CFE) contributes with the 6.23% of the national production, that is to say, 2600 MW approx. The turbo-gas units are aero-derivative gas turbines used for power generation, pumping and compression. Generally, they are used to support urgent requests in the demand of electricity or, for the permanent supply of electrical energy in isolated zones. In addition, they are used to quickly get into and get out of operation, which requires high availability, trustworthiness and flexibility. In this sense, and with the intention of improving the operation of the TGUs, the Gerencia de Control e Instrumentation (GCI) (Management of Control and Instrumentation) of the Instituto de Investigaciones Electricas (IIE), has developed a control technology for this type of units, able to replace the original control systems of units with even 30 years of continuous operation or to be installed in new units. [Spanish] En la actualidad, las unidades de turbogas (UTG) tienen una importante contribucion en el desarrollo y crecimiento del sector energetico nacional, pues este tipo de unidades pertenecientes a la Comision Federal de Electricidad (CFE) aportan el 6.23% de la produccion nacional, es decir, 2600 MW aproximadamente. Las unidades turbogas son turbinas de gas aeroderivativas empleadas para la generacion electrica, bombeo y compresion. Por lo general, son utilizadas para apoyar solicitudes urgentes en la demanda de electricidad o bien, para el suministro permanente de energia electrica en zonas aisladas. Ademas, se usan para entrar y salir rapidamente en operacion, lo que requiere alta disponibilidad, confiabilidad y flexibilidad. En este sentido, y con la intencion de mejorar las UTG, la Gerencia de Control e Instrumentacion (GCI) del Instituto de Investigaciones

  16. Analysis of passive systems as a tool for energy saving in buildings: solar control; Analisis de sistemas pasivos como herramienta para el ahorro de energia en edificaciones: Control solar

    Energy Technology Data Exchange (ETDEWEB)

    Saravia, Maricela; Morillon Galvez, David [Instituto de Ingenieria, UNAM, Mexico, D. F. (Mexico)

    1999-07-01

    A bioclimatic study of El Salvador is presented, with the purpose of using window eaves as elements of passive solar control and to determine the optimal angles of orientation, in order to diminish the thermal gains by direct solar radiation and to manage to get close to the comfort conditions. The former with the intention of integrating measures that help to obtain energy efficiency and comfortable buildings, for the conditions of warm humid climate, characteristic of a Central American country like El Salvador. Besides offering a document of consultation among the professionals dedicated to the design and as base of bioclimatic considerations that must have the construction regulations. As a conclusion the optimal angles of eaves for each orientation are presented and a quantitative estimation of the savings that would imply not to consume electrical energy in cooling systems using these elements as a protection to the direct solar radiation. [Spanish] Se presenta un estudio del bioclima de El Salvador, con el fin de utilizar aleros de ventana como elementos de control solar pasivo y determinar los angulos optimos por orientacion, para disminuir las ganancias termicas por radiacion solar directa y lograr acercar a las condiciones de confort. Lo anterior con el objeto de integrar medidas que coadyuven a lograr edificios energeticamente eficientes y confortables, para las condiciones de clima calido humedo, caracteristico de un pais centroamericano como El Salvador. Ademas de brindar un documento de consulta entre los profesionales dedicados al dise y como base de consideraciones bioclimaticas que debe tener el reglamento de construcciones. Como conclusion se presentan los angulos optimos de alero por cada orientacion y una estimacion cuantitativa del ahorro que implicaria el no consumir energia electrica en sistemas de enfriamiento utilizando estos elementos como una proteccion a la radiacion solar directa.

  17. Model for spatial synthesis of automated control system of the GCR type reactor; Model za prostornu sintezu sistema automatskog upravljanja reaktora GCR tipa

    Energy Technology Data Exchange (ETDEWEB)

    Lazarevic, B; Matausek, M [Institut za nuklearne nauke ' Boris Kidric' , Vinca, Belgrade (Yugoslavia)

    1966-07-01

    This paper describes the model which was developed for synthesis of spatial distribution of automated control elements in the reactor. It represents a general reliable mathematical model for analyzing transition states and synthesis of the automated control and regulation systems of GCR type reactors. One-dimensional system was defined under assumption that the time dependence of parameters of the neutron diffusion equation are identical in the total volume of the reactor and that spatial distribution of neutrons is time independent. It is shown that this assumption is satisfactory in case of short term variations which are relevant for safety analysis.

  18. Viabilidade econômica de sistemas de preparo do solo e métodos de controle de Tiririca em algodoeiro Economic viability of soil preparation systems and methods of Cyperus rotundus control in cotton

    Directory of Open Access Journals (Sweden)

    Francineuma P. de Arruda

    2005-12-01

    Full Text Available As plantas infestadas são responsáveis por perdas significativas na produção do algodão a nível mundial, cujo controle é difícil e oneroso. Com o objetivo de se estimar custos de produção e analisar economicamente a eficiência da plasticultura e de métodos de controle de ervas daninhas na cultura do algodoeiro herbáceo irrigado e em sequeiro, utilizaram-se dados obtidos de ensaios conduzidos nos municípios de Barbalha e Missão Velha, no Cariri Cearense, determinando-se o custo de produção, a receita líquida, o índice de lucratividade e os indicadores de viabilidade econômica: Valor Presente Líquido (VPL, Taxa Interna de Retorno (TIR e Relação Benefício-Custo (B/C. Verificou-se que tanto no cultivo irrigado como no cultivo de sequeiro, o método de controle de ervas daninhas mais eficiente e bem menos oneroso, foi o mecânico com preparo do solo convencional, e mais lucrativo no cultivo de sequeiro, apresentando maior VPL e TIR que os demais. O maior custo de produção por hectare foi obtido no cultivo irrigado, utilizando-se o método e controle integrado em sistema de preparo do solo com aiveca. O uso da plasticultura como método de controle de ervas daninhas, é economicamente viável apenas para o cultivo do algodoeiro de sequeiro.Weeds are responsible for significant losses in cotton production in the world and, its control is difficult and expensive. This work has the main objective to estimate production costs and analyse economically the efficiency of plasticulture and different methods of weeds control in irrigated and dry land herbaceous cotton, using data obtained in Barbalha and Missão Velha areas, in the state of Ceará, Brazil, evaluating production costs, net revenues, profitability index and economic viability indicators: Liquid Present Value (LPV, Ratio of Internal Return (RIT and Benefit-Cost Ratio (B/C. It was verified that in irrigated as well as in rainfed crop, the more efficient and economically

  19. Sistema integral para el diseño e implementación de control asistido por computadora

    Directory of Open Access Journals (Sweden)

    David L. Leal

    2016-04-01

    Full Text Available Resumen: En este trabajo se presenta el desarrollo de un sistema de adquisición de datos y control altamente interactivo, de bajo costo, y basado en un computador personal. El sistema está constituido por un hardware basado en un microcontrolador y un software basado en estándares abiertos. El software utiliza programación de diagramas de bloques como base para el diseño teórico e implementación de un sistema de control, con la finalidad de hacer que la programación sea sencilla y rápida. Una característica importante del sistema es la capacidad de ejecutar control embebido sin la intervención del computador personal, lo cual permite control en tiempo real. Adicionalmente, tiene capacidad de ampliación para crear un sistema de monitoreo y control distribuido por medio del Bus CAN, como interfaz de comunicación. En este trabajo también se expone la implementación del sistema desarrollado en diferentes plantas. Abstract: In this paper, the development of a highly interactive, low-cost, and personal computer based data acquisition and control system is presented. The system includes an embedded microcontroller based hardware and an open-standards software. The software uses block diagram programming as the base for the theoretical design and implementation of the control system, which makes the programming simple and fast. An important feature of this system is that it can execute an embedded control without the personal computer intervention, which facilitates the implementation of real-time control. Additionally, the system has the capacity to expand in order to create a distributed monitoring and control system by using a CAN bus as a communication interface. It is also shown in this paper the implementation of the developed system in different plants. Palabras clave: Entornos de experimentación, Sistemas embebidos o empotrados, Microcontroladores, Sistemas de tiempo real., Keywords: Experimentation environments, embedded or

  20. Controle social no Sistema Único de Assistência Social: propostas, concepções e desafios = Social control in the Social Welfare Unique System: proposals, conceptions and challenges

    Directory of Open Access Journals (Sweden)

    Silva, Vini Rabassa da

    2008-01-01

    Full Text Available A Constituição Federal de 1988, ao propor a criação de espaços de participação popular, buscou garantir a construção de políticas sociais públicas que atendam aos interesses da população e ao exercício do controle social. Este artigo apresenta reflexões acerca do controle social, na Política de Assistência Social, afirmando que este deve ser compreendido como um eixo que deve mover desde a sua construção, passando pela execução, e se expressando de forma mais objetiva na fiscalização e avaliação, que permanentemente devem acompanhar todas as ações, garantindo a participação da sociedade civil e, em especial, dos usuários da política, evitando, assim, que o Sistema Único de Assistência Social – SUAS – se materialize em um novo sistema que conserva a velha marca da subalternidade dos usuários dos serviços sócio-assistenciais

  1. Interação entre sistemas de manejo e de controle de plantas daninhas em pós-emergência afetando o desenvolvimento e a produtividade da soja Interaction between burndown systems and post-emergence weed control affecting soybean development and yield

    Directory of Open Access Journals (Sweden)

    R.S. Oliveira Jr.

    2006-12-01

    Full Text Available Este trabalho teve por objetivo avaliar a interação entre sistemas de manejo e de controle de plantas daninhas em pós-emergência na cultura da soja, cv. BRS 154, em plantio direto em áreas com expressiva cobertura vegetal. Foram avaliados 13 tratamentos, compostos por um esquema fatorial (3x4+1. Os fatores eram constituídos por três sistemas de manejo (dessecação imediatamente antes da semeadura, dessecação 10 dias antes da semeadura e dessecação antecipada, sendo esta composta por duas aplicações de manejo, a primeira 24 dias antes da semeadura e a segunda na data da semeadura, quatro formas de controle das plantas daninhas após a emergência da cultura (nenhum controle, capina manual das parcelas, aplicação única e aplicação seqüencial de herbicidas e um tratamento adicional, constituído por uma testemunha absoluta (sem manejo e sem controle em pós-emergência. Embora a dessecação nos diferentes sistemas de manejo tenha sido eficiente, a antecipação da dessecação no manejo antecipado favoreceu a emergência e o desenvolvimento inicial da soja, proporcionando maiores ganhos de produtividade, nas condições de infestação apresentadas. O sistema de manejo afetou também o fluxo de emergência das plantas daninhas após a emergência da soja, com menos reinfestações no sistema de manejo antecipado, em função do controle dos fluxos iniciais proporcionado pela segunda aplicação deste sistema de manejo. O manejo realizado na data da semeadura e dez dias antes prejudicou o desenvolvimento da soja, resultando em menor produtividade. O manejo antecipado, quando comparado aos demais sistemas, proporcionou maior produtividade da soja.This work aimed to evaluate the interaction between burndown methods and systems of post-emergence weed control in soybeans, cv. BRS 154, under no-tillage, in areas with expressive soil green cover. Thirteen treatments in a factorial scheme (3x4 +1, were evaluated. Main factors were

  2. Desarrollo conceptual de un sistema integrado para el control de calidad en mediciones de resistencia al deslizamiento Conceptual development of an integrated system for quality control of skid resistance measurements

    Directory of Open Access Journals (Sweden)

    Hernán de Solminihac

    2012-01-01

    Full Text Available La seguridad es uno de los aspectos principales a considerar cuando se evalúa la calidad de servicio provista por un camino. Por lo tanto, la determinación precisa de la fricción superficial del pavimento adquiere suma importancia como parte de un plan de gestión de redes viales. Actualmente se emplean diversos equipos y procedimientos para medir la resistencia al deslizamiento en superficies de pavimento, tales como el Péndulo Británico, GripTester y SCRIM, entre otros. Con estos equipos se recopila información en terreno que se compara posteriormente respecto a valores umbrales que se consideran aceptables. Con el fin de asegurar una confiabilidad y nivel de calidad aceptables para esos resultados, se debe realizar un monitoreo constante a los procedimientos de medición, así como revisiones y calibración de los instrumentos. Este artículo propone una metodología general para el control de calidad en instrumentos y mediciones de resistencia al deslizamiento. Tal metodología ha sido diseñada usando listas de verificación y aplicando conceptos estadísticos de repetibilidad y reproducibilidad. La metodología fue aplicada para evaluar el nivel de calidad alcanzado por instrumentos y procedimientos de medición de resistencia al deslizamiento empleados en Chile, con buenos resultados. La calidad de los procedimientos de evaluación incluidos en dicha metodología también fue verificada, usando las técnicas de análisis estadísticos Seis-Sigma, lo que contribuyó significativamente a mejorar el sistema de control de calidad propuesto.Safety is one of the main issues that must be considered when evaluating the quality of service provided by a road. Therefore, skid resistance measurement procedures are quite important components of a road management system. Currently, many equipments and procedures are used to measure skid resistance in pavement surfaces, like British Pendulum, GripTester, SCRIM, among others. Skid resistance data

  3. Soil organic carbon stocks in coffee plantations under different weed control systemsEstoques de carbono orgânico do solo em cafezais sob diferentes sistemas de controle de plantas invasoras

    Directory of Open Access Journals (Sweden)

    Franciane Diniz Cogo

    2013-06-01

    Full Text Available Soil organic carbon (COS is an important indicator of soil quality, as its levels and stocks can change by soil preparation. This study aimed to evaluate COS stocks on a clayey Oxisol cultivated with coffee and subject to different weed control systems in southern Minas Gerais, Brazil. The experimental design was in randomized blocks, and weed control systems were: no weeding, manual weeding, pre-emergence herbicide, post-emergence herbicide, rotary tiller, rotary mowers and disk harrow. Undisturbed soil samples were collected at two positions in the coffee plantation (tire tracks and planting line, at depths of 0-3, 10-13, and 25-28 cm. A nearby native forest was sampled as a reference. A higher bulk density of soils under coffee plantations occurred compared to soil under the forest. There was little difference between COS concentrations in the plating line in relation to the native forest, but for the tire track position, the amount of COS was generally lower. After correction for soil compaction, it was estimated a loss of ca. 20% in SOC stock for te 0-30 cm depth for herbicide post-emergence, rotary tiller, manual weeding and disk barrow, and a 35% loss when using herbicide pre-emergence. SOC stocks under no weeding and rotary mowers did not differ from native forest (37 M-1g ha COS, indicating that the rotary mower, which allows temporary growth of weeds and does not disrupt soil structure, is the most appropriate weed control for the preservation of COS in coffee plantations.O carbono orgânico no solo (COS é um importante indicador da qualidade do solo, pois seus teores e estoques podem ser alterados conforme o sistema de preparo do solo. Objetivou-se neste trabalho avaliar os estoques de COS em um Latossolo Vermelho distroférrico argiloso cultivado com cafeeiros (Coffea arabica L e submetido a diferentes manejos de plantas invasoras no sul de Minas Gerais. O delineamento experimental foi em blocos ao acaso, sendo os tratamentos os

  4. Control repetitivo digital de sistemas con frecuencia incierta o variante en el tiempo

    Directory of Open Access Journals (Sweden)

    Ramon Costa-Castelló

    2012-07-01

    Full Text Available Resumen: El control repetitivo digital es una técnica basada en el principio del modelo interno que permite seguir y/o rechazar señales periódicas. Una hipótesis clave en los diseños tradicionales de control repetitivo es que la frecuencia de tales señales es constante y conocida, siendo su principal desventaja la elevada degradación de prestaciones que aparece cuando dicha frecuencia es incierta o varía con el tiempo. En este trabajo se presenta una revisión de las principales estrategias introducidas hasta la fecha para resolver este problema. Abstract: Digital repetitive control is an internal model principle-based control technique that aims at tracking/rejecting periodic signals. A key assumption in traditional repetitive control designs is that the frequency of such signals is constant and known, its main drawback being the dramatic loss of performance that occurs when this frequency is uncertain or time-varying. This article reviews the most relevant proposals introduced so far to overcome this problem. Palabras clave: Control repetitivo, Sistemas de control lineal, Sistemas de tiempo discreto, Regulación de salida, Keywords: Learning control, Linear control systems, Discretetime systems, Output regulation

  5. Sistema de prototipos para control numérico

    Directory of Open Access Journals (Sweden)

    Abdón Sánchez Sossa

    1992-05-01

    Full Text Available La mejor utilización de equipos de alta tecnología implica el contar con el adecuado entrenamiento. La conformaci6n del Grupo de Control Numérico Computarizado de Ingenierfa de Sistemas en 1987, pionero, al permitir canalizar y consolidar en tres cursos electivos interdisciplinarios una respuesta a las inquietudes académico-docentes de apoyo al sector manufacturero. El desarrollo de varios programas, cuya complejidad ha venido creciendo con el tiempo, permitió explorar la aplicabilidad de los conceptos presentados en clase y sirvió de vinculo con la realidad Nacional de manera activa y comprometida, con el desarrollo del país. Los programas descritos en este trabajo son el resultado de muchas horas de labor y realizados contando con un exiguo presupuesto.

  6. Uso do novo sistema Clearfield® na cultura do girassol para o controle de plantas daninhas dicotiledóneas Use of the new Clearfield® system in sunflower culture to control dicotyledonous weeds

    Directory of Open Access Journals (Sweden)

    G. Santos

    2012-06-01

    Full Text Available A ocorrência de plantas daninhas dicotiledóneas tem limitado o aumento da área de cultivo de girassol no Brasil, devido ao seu impacto sobre a produtividade. Isso se deve à escassez de produtos registrados para a cultura com amplo espectro de ação. Em razão disso, desenvolveram-se dois experimentos com o objetivo de avaliar a eficácia e seletividade de herbicidas do grupo das imidazolinonas aplicados em pós-emergência de plantas daninhas dicotiledôneas na cultura do girassol Clearfield®. Os experimentos foram instalados no campo, em Iguatemi, distrito de Maringá-PR. Os tratamentos constituíram-se de duas testemunhas sem aplicação de herbicida, sendo uma sem capina e outra capinada, sulfentrazone (200,00 g ha-1 aplicado em pré-emergência e imazapic+imazapyr aplicados em pós-emergência nas doses de [36,75+12,25], [52,5+17,5], [12,25+36,75] e [17,5+52,5] g ha-1. Foram feitas avaliações de controle para Euphorbia heterophylla, Conyza bonariensis, Raphanus raphanistrum, Bidens pilosa, Ipomoea grandifolia e Portulaca oleracea. Também foram realizadas avaliações de intoxicação do girassol Clearfield®, estande e produtividade em kg ha-1. De acordo com os resultados, verificou-se que o uso do sistema Clearfield® mostrou-se uma ótima opção para áreas com infestação de plantas daninhas dicotiledôneas, pois possibilita a aplicação de herbicidas inibidores da enzima acetolactato sintase (ALS; os controles obtidos variaram de medianos a excelentes, além de ele não provocar injúrias à cultura e manter o estande inicial e a produtividade.The occurrence of dicotyledonous weeds has limited the increase of the area of sunflower cultivation in Brazil, due to their impact on crop yield. This is a result of a shortage of products registered for the crop with broad-spectrum control. Thus, two experiments were installed to evaluate the efficacy and selectivity of the imidazolinone herbicides applied on post

  7. Programación y Control de Sistemas de Fabricación Flexibles: un Enfoque Holónico

    Directory of Open Access Journals (Sweden)

    J.A. Araúzo

    2015-01-01

    Full Text Available Resumen: Los sistemas de fabricación holónicos constituyen un nuevo paradigma de producción. Incluidos dentro de las metodologías distribuidas, proponen nuevos esquemas de gestión de la fabricación que combinan auto-organización, jerarquías dinámicas y relaciones horizontales. Este enfoque es más cercano a la naturaleza de los sistemas de fabricación que las aproximaciones clásicas, centralizadas o estrictamente jerárquicas y permiten modelar los sistemas productivos de forma más realista, facilitando la implementación de sistemas más flexibles, escalables y robustos. En este artículo proponemos un sistema de programación y control para sistemas de fabricación flexibles desarrollado según el paradigma holónico. El sistema se basa en una nueva arquitectura que integra dos niveles de decisión: uno de programación basado en subastas, donde cada holón realiza su propio programa local; y otro de lanzamiento y control, a través del cual se coordinan las actividades de los holones. A diferencia de otros trabajos, donde los programas locales son integrados en un programa global que centraliza el sistema, en el sistema propuesto no ocurre así. Es el mecanismo de lanzamiento y control el que integra los programas locales. Además, el prototipo desarrollado puede funcionar con diferentes grados de descentralización, lo que permite valorar las ventajas que proporciona nuestra aproximación mediante simulación. Abstract: Holonic Manufacturing Systems are a new manufacturing paradigm. They are included into distributed methodologies and propose new manufacturing management schemes that combine self-organization, dynamic hierarchies and horizontal relationships. This approach is closer to manufacturing system nature than centralized or strictly traditional hierarchical approaches. It allows modeling manufacturing systems in a more realistic way. So, it make easier to implement more flexible, scalable, responsiveness, reconfigurable

  8. Sistema automatizado de aquecimento solar para controle de fitopatógenos da água de irrigação Automatic solar heating system for control of pathogens in irrigation water

    Directory of Open Access Journals (Sweden)

    Carlos A. da S. Braga

    2001-05-01

    Full Text Available O sistema automatizado de aquecimento solar, baseou-se em um processo misto de aquecimento da água em circuito fechado, através de coletores planos e dois princípios integrados de transmissão de calor, um por convecção natural e o outro por convecção forçada. A automatização foi realizada por monitores termostáticos diferenciais. Os testes normativos abrangeram as temperaturas programadas de 50, 55 e 60 ºC, que contemplam a faixa de temperatura letal para a maioria dos fitopatógenos. Os resultados indicaram rendimentos térmicos da ordem de 63, 55 e 52%, superiores, quando comparados aos rendimentos médios de 50, 47 e 45% dos sistemas convencionais. Os resultados experimentais mostraram que o sistema é eficiente para a eliminação de patógenos da água de irrigação, sendo promissor como uma opção de baixo custo para ser usado em viveiros, casas-de-vegetação e pequenas ou médias propriedades agrícolas.In the system proposed, which uses flat collectors, both natural and forced convection are responsible for the transfer of heat to the circulating water. The automation of the system is performed by thermostats, placed in different places, electrically connected to other components like valves and a water pump. Under identical test conditions and in the range of temperatures considered (50, 55 and 60 ºC, which includes the reference lethal temperature range for pathogens, the thermal efficiencies attained were 63, 55 and 52%, which compare favorably with those obtained in conventional systems, these being 50, 47 and 42% respectively, as reported. The results of the experimental trials show that the system described is a viable option to eliminate pathogens present in irrigation water, while its low cost makes it attractive for use in nurseries, greenhouses and on small farms.

  9. Avaliação de controles PID adaptativos para um sistema de aquecimento resistivo de água Evaluation of adaptive PID controls for a resistive system of heating water

    Directory of Open Access Journals (Sweden)

    Maria Isabel Berto

    2004-09-01

    Full Text Available O trabalho consiste na implementação de um controle convencional PID/SISO-feedback para obter um ajuste fino na temperatura de entrada da água de aquecimento em um processo de pasteurização. Para isto utilizou-se uma resistência de 2500 Watts instalada na linha do fluido secundário da seção de aquecimento do pasteurizador e um Pt100 para a medição de sua temperatura. Como o comportamento desta temperatura em função de uma mesma perturbação degrau de potência na resistência é dependente da vazão de trabalho, objetivou-se encontrar um controle único para que a mesma fosse mantida no set-point desejado na faixa de operação de vazão da água do processo (300 a 700L/h. Três sintonias para o controlador adaptativo PID foram testadas: a primeira consistiu na implementação de uma função adaptativa dos parâmetros PID, ajustada através dos valores individuais obtidos para cada vazão de trabalho conforme metodologia da curva de reação do processo; a segunda consistiu em configurar os parâmetros do PID com os valores médios destes calculados individualmente para cada vazão, e a terceira consistiu na sintonia através de uma função adaptativa ajustada pelos parâmetros de sintonia obtidos pela metodologia de Aström & Hägglund. A avaliação do desempenho das sintonias dos controladores adaptativos foi realizada por comparação dos valores dos índices de erro, obtidos por perturbações do sistema em malha fechada na vazão de água. Os resultados obtidos mostraram que dentre as sintonias testadas, a terceira sintonia, popularmente conhecida como "Bang-Bang", apresentou menores oscilações e os menores valores dos índices de erros.The aim of this work is to implement a conventional PID/SISO feedback control to obtain a fine adjustment of the water inlet temperature at a pasteurization process. For that, a resistance of 2500 Watts and a Pt100 to measure the temperature were installed in the water inlet line of the

  10. Aplicación de técnicas de control robusto QFT a sistemas navales

    Directory of Open Access Journals (Sweden)

    R. Muñoz-Mansilla

    2012-07-01

    Full Text Available Resumen: En este trabajo se realiza un análisis de diferentes metodologías de control robusto basadas en la técnica denominada Teoría de la Realimentación Cuantitativa, QFT (Quantitative Feedback Theory para resolver diferentes problemáticas que surgen en los sistemas de control marinos. En concreto se estudia el posicionamiento dinámico de una plataforma marina fondeada, la estabilización de un buque de alta velocidad, y el seguimiento de referencia para un aerodeslizador. Estos problemas de control presentan grandes retos de diseño, dado que son sistemas no lineales, multivariables, subactuados y con grandes perturbaciones. Los diferentes tipos de diseño QFT obtenidos consiguen una implementación robusta con prevención de acoplamientos, reducción de perturbaciones ambientales, respuestas rápidas y precisión en el seguimiento, que demuestran finalmente que es una alternativa práctica y eficaz para la solución de problemas de control en vehículos navales Abstract: In this work an analysis of the application of the Quantitative Feedback Theory (QFT technique to different marine systems is presented. Specifically, the problems of dynamic positioning of a moored platform, stabilization of a fast ferry and the tracking control of a hovercraft are studied. This control problem presents interesting questions to deal with, since the plants are non-linear, multivariable, underactuated and subject to large disturbances due to waves.Three multivariable nonlinear problems are solved using different sequential procedures. It is shown that the QFT controllers synthesis achieve robust performance, decoupling, environment disturbance reduction, quick answers and tracking precision. Therefore, it is shown that robust techniques based on QFT methodologies result feasible and very suitable, constituting an attractive alternative for robust design of marine vehicles. Palabras clave: Control robusto, sistema no lineal, vehículo subactuado

  11. Nùcleo de Control para Sistemas Empotrados de Control: Una propuesta de Arquitectura

    Directory of Open Access Journals (Sweden)

    Adel Ferńandez Prieto

    2011-01-01

    Full Text Available Resumen: En este trabajo se define la arquitectura de un núcleo de control (NC que permite ejecutar aplicaciones de control empotradas, así como los principales problemas que soportan su desarrollo. Se propone la estructura de los datos y los servicios que debe proveer este núcleo para aplicar varias estrategias de control que pueden ser utilizadas para garantizar seguridad, fiabilidad y economía en sus operaciones. En el trabajo se presentan dos ejemplos que ilustran el uso del nućleo de control. Palabras clave: Sistemas Empotrados de Control, Sistemas de Tiempo Real, Núcleo de control, Escasez de recursos

  12. Domogis: prototipo de un interfaz del sistema de control de un edificio integrado en un SIG

    Directory of Open Access Journals (Sweden)

    Álvarez, M.

    2010-06-01

    Full Text Available This paper deals with of a the use of Geographical Information Systems (GIS for domotic control. The foccus is put on the communication interface between the building control system (BCS integrated in a GIS. For get this aim, the GIS of the Montegancedo Campus where is located the Facultad de infomatica of UPM and the creation of an interface is needed. The implemented interface in Microsoft C# language allows the control, monotorizing and management of the sensors data installated in the Campus.

    Este trabajo trata de la utilización de los Sistemas de Información Geográfica (SIG en uno de las nuevos requerimientos de la arquitectura, el control domótico. El objetivo es el desarrollo de un interfaz de comunicación del Sistema de Control de un Edificio (SCE integrado en un SIG. La consecución de este objetivo implica previamente el desarrollo del SIG del Campus de Montegancedo sede de la Facultad de Informática de la UPM y la creación de un interfaz integrado en el SIG, desarrollado en lenguaje de programacion C# de Microsoft. Este interfaz dirige al usuario en la realización de ciertas tareas de control domótico de las instalaciones urbanas y edificios del Campus universitario, como evaluar, monotorizar y gestionar datos procedentes de sensores estratégicamente situados en dicho Campus.

  13. Development of solar thermophotovoltaic systems = Desarrollo de sistemas termofotovoltaicos solares

    OpenAIRE

    Datas Medina, Alejandro

    2011-01-01

    Esta tesis aborda el análisis, tanto teórico como experimental, de los sitemas termofotovoltaicos solares. En estos sistemas, un material (emisor) se calienta hasta la incandescencia mediante radiaci ón solar. La radiación térmica emitida por dicho material se dirige hacia una célula fotovoltaica, que convierte dicha radiación en electricidad. En esta configuración, se pueden emplear elementos de control espectral para lograr que los fotones no útiles para el proceso de conversión fotovoltáic...

  14. Sistema de salud de Ecuador The health system of Ecuador

    Directory of Open Access Journals (Sweden)

    Ruth Lucio

    2011-01-01

    Full Text Available En este trabajo se describen las condiciones de salud en Ecuador y, con mayor detalle, las características del sistema ecuatoriano de salud, incluyendo su estructura y cobertura, sus fuentes de financiamiento, los recursos físicos, materiales y humanos de los que dispone, las tareas de rectoría que desarrolla el Ministerio de Salud Pública, la generación de información en salud, las tareas de investigación, y la participación de los ciudadanos en la operación y evaluación del sistema. También se discuten las innovaciones más recientes que se han implantado en el sistema ecuatoriano de salud dentro de las que destaca la incorporación de un capítulo específico sobre salud a la nueva Constitución que reconoce a la protección de la salud como un derecho humano y la construcción de la Red Pública Integral de Salud.This paper describes the health conditions in Ecuador and, in more detail, the characteristics of the Ecuadorian health system, including its structure and coverage, its financial sources, the physical, material and human resources available, and the stewardship activities developed by the Ministry of Public Health. It also describes the structure and content of its health information system, and the participation of citizens in the operation and evaluation of the health system. The paper ends with a discussion of the most recent policy innovations implemented in the Ecuadorian system, including the incorporation of a chapter on health into the new Constitution which recognizes the protection of health as a human right, and the construction of the Comprehensive Public Health Network.

  15. A fuzzy controller for the VASPS (Vertical Annular Separation and Pumping System) subsea separation and pumping system; Um controlador fuzzy para o sistema de separacao e bombeamento submarino - VASP (Vertical Annular Separation and Pumping System)

    Energy Technology Data Exchange (ETDEWEB)

    Teixeira, Alex F.; Mendes, Jose Ricardo P.; Morooka, Celso K. [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia Mecanica. Dept. de Engenharia de Petroleo; Estevam, Valdir [PETROBRAS, Rio de Janeiro, RJ (Brazil); Guilherme, Ivan R. [UNESP, Rio Claro, SP (Brazil). Inst. de Geociencias e Ciencias Exatas. Dept. de Estatistica, Matematica Aplicada e Computacao; Rigo, Jose Eduardo [Centro Federal de Educacao Tecnologica no Espirito Santo (CEFETES), Vitoria, ES (Brazil)

    2004-07-01

    In this paper the designs of a fuzzy controller for the VASPS (Vertical Annular Separation and Pumping System) liquid level and separation pressure control are presented, as well as a simulation of its work to evaluate the performance of the controller designed. The VASPS is a two-phase subsea separation and pumping system, which is made up of a separation vessel, where the mixture (liquid and gas) enters and suffers the separation process through three levels, the expansion chamber, the helix and the pool. The liquid inside the pool is taken to the platform using a pump that with a choke control the pool liquid level. The pool liquid level control is necessary because if the level exceeds the maximum value allowed, the liquid can invade the space occupied by the helix and hinder the separation process. An the other hand if the level is below the minimum allowed the pump can be damaged. The separation pressure control is important for operational security and efficiency issues, because when we keep the separation pressure near an optimum value we are maximizing its efficiency. With the controller and the simulator, many simulations of the work of system were made to get results that could be used to evaluate if the designed controller solved the problem and if its performance were satisfactory. After, a PID control system was designed to be used as comparison with the results obtained with the fuzzy controller, since the PID is widely used in the industrial environment. (author)

  16. El Sistema Bethesda 2001 The 2001 Bethesda System

    Directory of Open Access Journals (Sweden)

    Christine Bergeron

    2003-01-01

    Full Text Available The Bethesda system is a system of terminology for reporting the results of cervical cytology. It was developed in 1988, and is now widely used in the United States. This system was updated in April 2001. The most important modifications are the following: a elimination of the category "satisfactory but limited by", b the reintegration of benign modifications in the normal category, c "atypical squamous cells of undetermined significance" is now named "atypical squamous cells" and subdivided into "atypical squamous cells of undetermined significance" and "cannot exclude high grade squamous intraepithelial lesion"; and d endocervical adenocarcinoma in situ which is now a separate entity. Low grade squamous intraepithelial lesions and high grade squamous intraepithelial cells remain unchanged. Recommendations have been proposed concerning automated review and ancillary testing.El Sistema Bethesda es un sistema de terminología para informar los resultados de citología cervical. Se inició en 1988 y en la actualidad se usa en todos los Estados Unidos de América. Este sistema se actualizó en abril de 2001. Las modificaciones más importantes son las siguientes: a eliminación de la categoría "satisfactorio pero limitado por", b se reintegraron las modificaciones benignas en la categoría normal, c la categoría "células escamosas atípicas de significado indeterminado" ahora se denomina "células escamosas atípicas", y se subdivide en "células escamosas atípicas de significado indeterminado" y "no se puede excluir una lesión escamosa de alto grado", y d adenocarcinoma endocervical in situ, que ahora es una entidad separada. Las lesiones escamosas intraepiteliales de bajo y alto grado quedan sin cambios. Se proponen recomendaciones relacionadas con el uso de la revisión automatizada y la utilización de pruebas auxiliares.

  17. Pumping systems characterization; Caracterizacion de los sistemas de bombeo

    Energy Technology Data Exchange (ETDEWEB)

    Torres Gutierrez, R. [Eficiencia Energetica, S.A. de C.V., Mexico, D. F. (Mexico)

    1995-12-31

    In this paper the characterization of the pumping systems is discussed, and an explanation is given of the need of evaluating in detail the possibility of implementing the frequency variators as an option for energy conservation, explaining how the simple use of the similarity or affinity laws lead to over-estimate the saving. [Espanol] En este articulo se describe la caracterizacion de los sistemas de bombeo y se explica la necesidad de evaluar en detalle la posibilidad de implementacion de variadores de frecuencia, como una alternativa para el ahorro de energia, explicando como el simple uso de las leyes de semejanza o afinidad llevan a sobre-evaluar los ahorros.

  18. Pumping systems characterization; Caracterizacion de los sistemas de bombeo

    Energy Technology Data Exchange (ETDEWEB)

    Torres Gutierrez, R [Eficiencia Energetica, S.A. de C.V., Mexico, D. F. (Mexico)

    1996-12-31

    In this paper the characterization of the pumping systems is discussed, and an explanation is given of the need of evaluating in detail the possibility of implementing the frequency variators as an option for energy conservation, explaining how the simple use of the similarity or affinity laws lead to over-estimate the saving. [Espanol] En este articulo se describe la caracterizacion de los sistemas de bombeo y se explica la necesidad de evaluar en detalle la posibilidad de implementacion de variadores de frecuencia, como una alternativa para el ahorro de energia, explicando como el simple uso de las leyes de semejanza o afinidad llevan a sobre-evaluar los ahorros.

  19. Estudio sobre la efectividad para la prevención de la legionelosis del sistema de calentamiento instantáneo, instalado en la red de agua sanitaria de un hospital Effectiveness study of a pasteurization system in controlling contamination with Legionella installed in a hospital's hot water system

    Directory of Open Access Journals (Sweden)

    Laura Gavaldà Mestre

    2006-12-01

    Full Text Available Se ha estudiado la efectividad de un sistema de pasteurización en el control de la contaminación por Legionella en la red de agua caliente de un hospital.El hospital había optado por este sistema debido a que los acumuladores convencionales originales presentaban importantes problemas en la capacidad de producción y en el mantenimiento de las temperaturas de distribución.El estudio fue iniciado después de haberse instalado los pasteurizadores y ha consistido en la realización de controles mensuales de Legionella y temperatura durante un período de 11 meses. De los resultados, se puede valorar que el sistema de pasteurización se considera efectivo, siempre y cuando las condiciones de la red (circulación, material, diseño, etc sean las adecuadas. El sistema no se considera efectivo en redes antiguas y con ramales sin circulación como se ha podido constatar en este estudio en el edificio de servicios, donde las conducciones presentaban un estado de conservación deficiente. En esta zona de servicios los controles de Legionella han mostrado una mejora únicamente después de que se iniciara un programa de purgas junto con la paulatina sustitución de los tramos en mal estado.The effectiveness of a pasteurization system in controlling contamination with Legionella has been evaluated in a hospital’s hot water system.The hospital acquired these equipments because the original system -conventional hot water tanks– had problems in producing and maintaining the distribution temperatures in the hot water circuit.The study started 11 months after the pasteurizers had been installed. The study consisted on Legionella and temperature controls which were conducted monthly during an 11-month period. Results have proved that a pasteurization system method to be an effective system of instantaneous warming provided that there are adequate conditions (circulation, materials, design, etc.. This system has no effectiveness in old nets or nets with

  20. Una propuesta para la arquitectura informática del sistema de control de un edificio

    Directory of Open Access Journals (Sweden)

    Triviño Barros, Gracián

    2004-12-01

    Full Text Available Nowadays, in order to perform the optimal installations automatic control, buildings structure incorporates a new kind of computers which are different from the desk computers dedicated to user’s personal tasks.These computers spread in the form of a network that is overlapped with the building structure in such a way that soon we shall speak about the computer omnipresence in the building.The building control system is considered in this paper as an intelligent agent. This means a control system provided with sensors and actuators to interact with its environment. This control system must develop its activity in order to get autonomously the programmed goals. A generic control building architecture is presented as a step towards the systematic development of control building systems.A project for the development of a software tool is also presented. This tool intends to support and make easy the programming of such kind of control systems. This project is been developed in the Department of Photonic Technology at Universidad Politécnica of Madrid.La necesidad de realizar un control automático óptimo de las instalaciones de un edificio ha provocado que un nuevo tipo de ordenadores, diferentes de los ordenadores de sobremesa que utilizan personalmente los habitantes del edificio, entren a formar parte de la arquitectura del propio edificio.Estos ordenadores se van extendiendo en forma de una red imbricada con la propia estructura del edificio de tal manera que pronto podremos hablar de la omnipresencia del ordenador en el edificio.En este trabajo se plantea el sistema de control del edificio como un agente inteligente, como un sistema que dotado de sensores para percibir su entorno, y de medios de actuación para modificarlo, realiza permanentemente ciertas operaciones de procesamiento de información y acciones sobre el propio edificio persiguiendo de manera autónoma alcanzar los objetivos para los que ha sido diseñado.Como un paso

  1. Advanced control system for temperature control in the pressurized fluid bed of Escatron Thermal Plant Power; Sistema de Control Avanzado para Control de la Temperatura del Lecho Fluido a Presion de la Central Termica de Escatron

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    In the P. F-B. C a small problem appears, particularly in Escatron the bed temperature gradient is very high. Such gradient very occasionally reaches 50 degree centigree in a same plane. With the reduction of bed difference of temperature, the average bed temperature could be increased with the result steam cycle benefit, at the same time combustion gases would go at a higher temperature to the gas turbine, increasing therefore its performance. The SCAP system will allow to face the resolution of the injection of combustible problem and in this manner achieve the homogenization of bed temperature in Escatron PFBC Thermal Power Station. (Author)

  2. Efeito de sistemas de produção e doses de adubo de liberação lenta no estado nutricional de porta-enxerto cítrico The effect of production systems and doses of controlled-release fertilizer on the nutritional status of citrus rootstock

    Directory of Open Access Journals (Sweden)

    Luiz Augusto Lopes Serrano

    2004-12-01

    Full Text Available O sistema de produção do porta-enxerto, antes da repicagem, pode modificar o sistema radicular das plântulas e a resposta destas à adubação. Assim, o objetivo desse trabalho foi avaliar os efeitos de três sistemas de produção do limoeiro 'Cravo' e de cinco doses de um adubo de liberação lenta, aplicados após a repicagem, sobre o estado nutricional do limoeiro 'Cravo' no ponto de enxertia. O experimento foi conduzido, sob viveiro telado, em esquema fatorial 3 x 5, com sete repetições e uma planta por parcela. Os sistemas de produção do porta-enxerto foram: 1- produção em tubetes e citrovasos preenchidos com substrato comercial composto por casca de pínus; 2- produção em tubetes e citrovasos preenchidos com substrato composto por bagaço de cana-de-açúcar + torta de filtro (3:2; v:v, e 3- produção em blocos prensados e citrovasos constituídos pela prensagem do substrato utilizado no sistema 2. As doses de adubo de liberação lenta, fórmula NPK 14-14-14, foram: 5; 10; 15; 20 e 25 g/planta. O sistema de produção do porta-enxerto, antes da repicagem, influenciou na resposta do limoeiro 'Cravo' à adubação após a repicagem. No ponto de enxertia, as plantas cultivadas no sistema de blocos prensados apresentaram menores teores foliares de P, K e Fe em relação às plantas provenientes de tubetes, mas apresentaram maiores médias de crescimento (peso seco do sistema radicular, peso seco de folhas, peso seco de caules e diâmetro do caule. Plantas cultivadas no sistema 1 apresentaram sintomas foliares de deficiência de Fe, enquanto as plantas dos outros dois sistemas apresentaram sintomas foliares de deficiência de Mg.The production system of citrus rootstock before the transplanting can modify the seedlings root system and the response of these to fertilization. The objective of this experiment was to evaluate the effects of three production systems of 'Rangpur' lime tree and five doses of a controlled

  3. Complejidad y sistemas complejos Complexidade e sistemas complexos Complexity and complex systems

    Directory of Open Access Journals (Sweden)

    Mario Tarride

    1995-06-01

    Full Text Available O pensamento sistêmico e a complexidade revestem-se de especial interesse para a compreensão dos mais diferentes tipos de fenômenos. A necessidade de usar complementarmente análise e síntese, a avaliação da realidade de maneira holística, onde a convivência com a complexidade é um fato que se aceita e não se nega através do reducionismo, assim como o surgimento da ordem a partir do caos e a participação ativa do 'modelizador de sistemas' no desenho de artefatos a partir da linguagem, são alguns dos materiais que compõem este particular esforço de síntese do pensamento de determinados autores.Systemic thinking and complexity are of special interest when it comes to understanding a wide spectrum of phenomena. The present paper synthesizes some authors' ideas regarding a number of topics in this area: the need to use analysis and synthesis complementarity; the holistic evaluation of reality, where living with complexity is an accepted fact, not negated through reductionism; the emergence of order from chaos; and the active participation of a 'model-creator' in the design of artifacts from language.

  4. Design project of the dosimetry control system in the independent CO{sub 2} loop for cooling the samples irradiated in the RA reactor vertical experimental channels, Vol. V; Album V: Predprojekat sistema dozimetrijske kontrole u nezavisnom kolu CO{sub 2} za hladjenje uzoraka ozracivanih u VEK reaktora RA

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1964-07-01

    Design project of the dosimetry control system in the independent CO{sub 2} loop for cooling the samples irradiated in the RA reactor vertical experimental channels includes the following: calculations of CO{sub 2} gas activity, design of the dosimetry control system, review of the changes that should be done in the RA reactor building for installing the independent CO{sub 2} loop, specification of the materials with cost estimation, engineering drawings of the system. Predprojekat sistema dozimetrijske kontrole u nezavisnom kolu CO{sub 2} za hladjenje uzoraka ozracivanih u vertikalnim eksperimentalnim kanalima reaktora RA sadrzi: proracun aktivnosti gasa CO{sub 2}, idejno resenje sistema dozimetrijske kontrole, pregled izmena koje bi trebalo izvrsiti u zgradi RA u vezi montaze nezavisnog kola CO{sub 2}, specifikaciju materijala sa cenom kostanja i graficku dokumentaciju predprojekta.

  5. Implantación de un sistema de control integral de equipamiento informático

    OpenAIRE

    Valiente Fernández, José Manuel

    2015-01-01

    Cada vez más las empresas, tanto las grandes compañías como las PYMES, se van adaptando a las nuevas tecnologías y requieren una mayor informatización de sus sistemas. Este proceso exige entre otras cosas un control de los sistemas implantados y la securización de la información confidencial de las empresas adecuándose a la legislación vigente. Debido a esto todos los sistemas informáticos requieren de un control, mantenimiento y actualización constante. Estas tareas administrativas de ...

  6. Modernization of the feedwater heaters control level of the Almaraz I Nuclear Power Plant by OVATION system; Modernizacion del control de nivel de los calentadores de agua de alimentacion de C.N. Almaraz I mediante el sistema OVATION

    Energy Technology Data Exchange (ETDEWEB)

    Madronal Rodriguez, E.; Cabrero Munoz, J. E.

    2010-07-01

    As a result of the process of technological renovation of the heaters system and the power increase project, Almaraz Nuclear Power Plant has made several design changes in the feedwater heaters system. Within these changes, the old heaters control loops are replaced because the new power will increase the heaters drainage caudal. This modernization is carried out using the OVATION control system.

  7. DISEÑO DE UN PROCEDIMIENTO PARA REALIZAR EL AUTOCONTROL DEL SISTEMA DE GESTIÓN INTEGRADO DE CAPITAL HUMANO / DESIGN OF A PROCEDURE TO DEVELOP THE SELF-CONTROL TO THE INTEGRATED HUMAN CAPITAL MANAGEMENT SYSTEM

    Directory of Open Access Journals (Sweden)

    Roxana González-Alvarez

    2012-01-01

    Full Text Available La investigación considera como caso de estudio la experiencia de la Empresa Comercializadora de Combustibles de Cienfuegos (ECC, la cual trabaja en implantar el Sistema de Gestión Integrada de Capital Humano (SGICH desde el año 2008. En el presente artículo se exponen los resultados del proceso de autocontrol realizado al SGICH en la ECC, visualizando las experiencias obtenidas desde el comienzo del proceso de implantación del Modelo de Gestión Integrada de Capital Humano. El autocontrol se realiza utilizando la metodología del ciclo Deming y las herramientas propias que plantea el modelo (tecnología de diagnóstico, así como entrevistas, tormenta de ideas, revisión de documentos, técnicas de normación de competencias, de mapeo de proceso y trabajo con expertos. Para el procesamiento de los datos obtenidos se utiliza el paquete estadístico SPSS versión 16.0 y el Microsoft Excel. Finalmente, se propone un procedimiento enfocado a facilitar el desarrollo del autocontrol al SGICH como proceso de mejora continua y que, además, permita la certificación de la empresa según los requisitos de las Normas Cubanas 3000.The investigation takes as a case of study the experience of Cienfuegos's Fuel Trading Company (ECC, which works in the implementation of the Integrated Human Capital Management System since 2008. This system is integrated by eight processes, being the self-control one of them. The results of the self-control process to the human capital management system in the ECC are exposed in the present article, visualizing the experiences obtained from the beginning of the implementation process of the Integrated Human Capital Management Model. The self-control is carried out using the methodology of the Deming cycle and the very own tools that are presented by the model (technology of diagnostic, as well as others: interviews, brainstorming, review of documents, techniques of regulation of competences, mapping of processes and the

  8. Sistema de salud de Chile The health system of Chile

    Directory of Open Access Journals (Sweden)

    Víctor Becerril-Montekio

    2011-01-01

    Full Text Available En este trabajo se describe el sistema de salud de Chile, incluyendo su estructura, financiamiento, beneficiarios y recursos físicos, materiales y humanos de los que dispone. Este sistema está compuesto por dos sectores, público y privado. El sector público está formado por todos los organismos que constituyen el Sistema Nacional de Servicios de Salud y cubre aproximadamente a 70% de la población, incluyendo a los pobres del campo y las ciudades, la clase media baja y los jubilados, así como los profesionales y técnicos. El sector privado cubre aproximadamente a 17.5% de la población perteneciente a los grupos sociales de mayores ingresos. Un pequeño sector de la población, perteneciente a la clase alta, realiza pagos directos de bolsillo a proveedores privados de servicios de atención a la salud. Alrededor de 10% de la población está cubierta por otras agencias públicas, fundamentalmente los Servicios de Salud de las Fuerzas Armadas. Recientemente el sistema se reformó creando el Régimen General de Garantías en Salud, que establece un Sistema Universal con Garantías Explícitas que se tradujo, en 2005, en el Plan de Acceso Universal con Garantías Explícitas (AUGE, que garantiza el acceso oportuno a servicios de calidad para 56 problemas de salud, incluyendo cáncer en niños, cáncer de mama, trastornos isquémicos del corazón, VIH/SIDA y diabetes.This paper describes the Chilean health system, including its structure, financing, beneficiaries, and its physical, material and human resources. This system has two sectors, public and private. The public sector comprises all the organisms that constitute the National System of Health Services, which covers 70% of the population, including the rural and urban poor, the low middle-class, the retired, and the self-employed professionals and technicians.The private sector covers 17.5% of the population, mostly the upper middle-class and the high-income population. A small

  9. Efikasnost sistema PVO u uslovima elektronskih dejstava / Efficiency of antiaircraft system in electronic warfare

    Directory of Open Access Journals (Sweden)

    Vladimir V. Šepec

    2007-01-01

    Full Text Available U radu je primenjena teorija masovnog opsluživanja u analizi efikasnosti sistema protivvazduhoplovne odbrane (sistema PVO u uslovima elektronskih dejstava protivnika. Prikazan je model za ocenu efikasnosti sistema PVO i predstavljeni su izrazi za procenu efikasnosti sistema PVO u uslovima elektronskih dejstava. / In this article the theory of mass servicing is used in the analysis of efficiency of antiaircraft system in the conditions of electronic warfare. The model for analysis of the antiaircraft system efficiency has been shown and formulas for qualitative analysis of antiaircraft system efficiency have been presented in the conditions of electronic warfare.

  10. Results of verifications of the control automatic exposure in equipment of RX with CR systems; Resultados de las verificaciones del control automatico de exposicion en equipos de RX con sistemas CR

    Energy Technology Data Exchange (ETDEWEB)

    Ruiz Manzano, P.; Rivas Ballarin, M. A.; Ortega Pardina, P.; Villa Gazulla, D.; Calvo Carrillo, S.; Canellas Anoz, M.; Millan Cebrian, E.

    2013-07-01

    After the entry into force in 2012, the new Spanish Radiology quality control protocol lists and discusses the results obtained after verification of the automatic control of exposure in computed radiography systems. (Author)

  11. Diseño de un sistema de control interno basado en el modelo Coso para el área contable y financiera de la compañía industrial y comercial TCM S.A.

    OpenAIRE

    Llumitaxi Saltos, Jenniffer Lissette; Vélez Swett, Jean Carlos

    2015-01-01

    La finalidad del proyecto se enfoca en proponer un Sistema de Control Interno basado en el sistema COSO 1, adecuado a las actividades de la compañía. The purpose of the project is to focus on the proposal of an Internal Control System based on the COSO 1 system, appropriate to the activities of the company.

  12. Computerized supervision and control system for movement at the RP-10 reactor control rods bank; Sistema de supervicion y mando computarizado para el movimiento en banco de las barras de control del Reactor RP-10

    Energy Technology Data Exchange (ETDEWEB)

    Padilla M, C E

    1998-07-01

    The project involves the use of a compatible microcomputer, Labwindows/CVI software, as well as National Instruments data acquisition cards AT-MIO16-E10 and PC-DIO96 to modify the sequence of movement of the reactor's rods and control them from a graphic interface in a computer's monitor. This graphic presentation is set as console of virtual instruments from where rod movement can be conducted. Normal rod movement, bank rod movement, and rod calibration have been considered. These experiences involve different logic of rod movements, which will determine movement sequence. Control of the automatic range of a current amplifier module was also considered. This module is know as 'automatic pilot amplifier' and given the strategic location of its detector (compensated ionizing camera) at the reactor's core, it delivers neutron flux current considered as reference to superficial neutron flux distribution at the reactor's core. Lecture and monitoring of this signal allows taking the reactor to a certain power, current of this signal is proportional to the power we want the reactor to reach. Advantages obtained with this system include the update of the control console, more uniform distribution of neutron flux, with lower and uniform burnup of nuclear fuel. (author)

  13. El control de gestión y los sistemas de información: propuesta de herramientas de apoyo / The management control and the information systems: proposal of support tools

    Directory of Open Access Journals (Sweden)

    Raúl Comas-Rodríguez

    2014-04-01

    Full Text Available El objetivo del artículo es desarrollar un procedimiento para el control de gestión, basado en un cuadro de mando integral (CMI con enfoque de procesos, que contribuya a mejorar la eficiencia y la eficacia en la Empresa Comercializadora Divep Sancti Spíritus. Se define un procedimiento que combina la definición de los procesos desde la planeación. Como resultados se definen los factores clave del éxito de la empresa asociados a las cuatro perspectivas del cuadro de mando integral las cuales se enlazan a través de relaciones causa-efecto y se obtiene el mapa estratégico que permite visualizar y comunicar la estrategia de la empresa. Los indicadores, para medir la actuación, se evalúan con el sistema de información definido, asistido por el software GECAS versión 3.0. La implementación del procedimiento contribuyó a mejorar la eficiencia y la eficacia de la Empresa Comercializadora Divep Sancti Spíritus. ABSTRACT The objective of this article is to develop a procedure to the management control, based in a balanced scorecard with focus of process, which contribute to improve the efficiency and the efficacy in the Comercializadora Divep Sancti Spíritus Enterprise. A procedure, based in the Balanced Scorecard, that integrates the process definition into the planning is defined. As results, the key factors of the enterprise success associated to the four perspectives of the Balanced Scorecard which are linked through the cause-effect relations are defined and the strategic map that contribute visualizing and communicating the enterprise strategy is obtained. The indicators are evaluated with the assistance of the software GECAS version 3.0. The implementation of the procedure contributed to improve the efficiency and the efficacy in the Comercializadora Divep Sancti Spíritus Enterprise.

  14. Sistema de salud de Brasil The health system of Brazil

    Directory of Open Access Journals (Sweden)

    Víctor Becerril Montekio

    2011-01-01

    Full Text Available En este trabajo se describe el sistema de salud de Brasil, que está compuesto por un sector público que cubre alrededor de 75% de la población y un creciente sector privado que ofrece atención a la salud al restante 25% de los brasileños. El sector público está constituido por el Sistema Único de Salud (SUS y su financiamiento proviene de impuestos generales y contribuciones sociales recaudadas por los tres niveles de gobierno (federal, estatal y municipal. El SUS presta servicios de manera descentralizada a través de sus redes de clínicas, hospitales y otro tipo de instalaciones, y a través de contratos con establecimientos privados. El SUS es además responsable de la coordinación del sector público. El sector privado está conformado por un sistema de esquemas de aseguramiento conocido como Salud Suplementaria financiado con recursos de las empresas y/o las familias: la medicina de grupo (empresas y familias, las cooperativas médicas, los llamados Planes Autoadministrados (empresas y los planes de seguros de salud individuales. También existen consultorios, hospitales, clínicas y laboratorios privados que funcionan sobre la base de pagos de bolsillo, que utilizan sobre todo la población de mayores ingresos. En este trabajo se analizan los recursos con los que cuenta el sistema, las actividades de rectoría que se desarrollan y las innovaciones más recientemente implantadas, incluyendo el Programa de Salud de la Familia y el Programa Más Salud.This paper describes the Brazilian health system, which includes a public sector covering almost 75% of the population and an expanding private sector offering health services to the rest of the population. The public sector is organized around the Sistema Único de Saúde (SUS and it is financed with general taxes and social contributions collected by the three levels of government (federal, state and municipal. SUS provides health care through a decentralized network of clinics

  15. Control Basado en Eventos de Sistemas de Primer Orden Con Retardo

    Directory of Open Access Journals (Sweden)

    Ángel Ruiz

    2013-07-01

    : Sistemas por eventos, Control PID, Sintonía, Sistemas de primer orden, Keywords: Event systems, PID control, Tuning, First order systems

  16. Control Difuso con Estimador de Estados para Sistemas de Páncreas Artificial

    Directory of Open Access Journals (Sweden)

    Rodrigo González

    2016-10-01

    Full Text Available Resumen: Se propone la utilización de un controlador difuso sobre un modelo de estados mínimos con el fin de alcanzar un control de infusión de insulina continuo y eficiente en pacientes con T1DM. El sistema se apoya con un Filtro Extendido de Kalman para suplir las deficiencias de los dispositivos físicos actuales y estimar insulina remanente en el organismo con el fin de predecir su comportamiento futuro. El controlador sintonizado logra una respuesta restringida entre [80, 140] mgdl, con una media de 117, 6 mgdl y desviación estándar de 11, 3 mgdl sobre un conjunto de 365 realizaciones de 24 horas de control con 4 ingestas diarias. Estos resultados muestran que es posible diseñar controladores de baja complejidad que son fácilmente sintonizables por usuarios experimentados o médicos, con un nuevo enfoque de revisión en lazo cerrado. Además, la combinación de técnicas heurísticas con aquellas basadas en modelos permite sintentizar un controlador robusto frente al contexto real de aplicación y, también, administrar en forma eficiente el gasto de insulina. Aún así, la aplicacioón de un sistema completamente automatizado en un ser humano requerirá modelos de mayor dimensión para ajustarse a diferentes situaciones, un controlador de alta robustez y amplia adaptabilidad al organismo de cada paciente y su rutina de ingestas. Abstract: A fuzzy controller for a minimal states model is proposed to achieve a continuous and effcient insulin infusion in patients with Type 1 Diabetes. An Extended Kalman Filter is also applied to supply the deficiencies of the current glucose sensor technologies and estimate residual insulin in the system to predict future behavior. The controller is tuned manually and iteratively, and achieves closed-loop responses of glycemia constrained between [80,140] (mgdl, with a mean of 117, 6 (mgdl and a standard deviation of 11, 3 (mgdl over a whole year ensemble of 24-hour system responses with 4 meal intakes

  17. Sistema de salud de Colombia The health system of Colombia

    Directory of Open Access Journals (Sweden)

    Ramiro Guerrero

    2011-01-01

    Full Text Available En este trabajo se presenta una breve descripción de las condiciones de salud de Colombia y una descripción detallada del sistema colombiano de salud. Esta última incluye una descripción de su estructura y cobertura, sus fuentes de financiamiento, el gasto en salud, los recursos con los que cuenta, quién vigila y evalúa al sector salud y qué herramientas de participación tienen los usuarios. Dentro de las innovaciones más recientes del sistema se incluyen las modificaciones al Plan Obligatorio de Salud y a los montos de la unidad de pago por capitación, la integración vertical entre empresas promotoras de salud y las instituciones prestadoras de servicios, así como el establecimiento de nuevas fuentes de recursos para lograr la universalidad e igualar los planes de beneficios entre los distintos regímenes.This document briefly describes the health conditions of the Colombian population and, in more detail, the characteristics of the Colombian health system. The description of the system includes its structure and coverage; financing sources; expenditure in health; physical material and human resources available; monitoring and evaluation procedures; and mechanisms through which the population participates in the evaluation of the system. Salient among the most recent innovations implemented in the Colombian health system are the modification of the Compulsory Health Plan and the capitation payment unit, the vertical integration of the health promotion enterprises and the institutions in charge of the provision of services and the mobilization of additional resources to meet the objectives of universal coverage and the homologation of health benefits among health regimes.

  18. Implementation of imaging of the national protocol for quality control in planning systems; Implementacion de pruebas de imagen del protocolo nacional de control de calidad en sistemas de planificacion

    Energy Technology Data Exchange (ETDEWEB)

    Caudepon Moreno, F.; Martin-Viera cueto, J. A.; Bodineau gil, C.; Benitez Villegas, E. M.; Casado Villalon, F. J.; Moreno Sainz, C.

    2011-07-01

    Quality control of the planning system (SP) plays a key role in quality assurance schemes that include all stages of the radiotherapy process.In this work we focus on the evidence detailing the {sup P}rotocol for quality control in therapy planning systems with ionizing radiation of the SEFM in {sup a}natomical data acquisition (DA).

  19. Quality control of brachytherapy system module Oncentra MasterPlan V3.3 planning; Control de calidad del modulo de braquiterapia del sistema de planificacion Oncentra MasterPlan V3.3

    Energy Technology Data Exchange (ETDEWEB)

    Monja Ray, P. de la; Torres Pozas, S.; Sanchez Carrascal, M.; Macias Verde, D.; Martin Oliva, R.

    2011-07-01

    We present the results of quality control carried out the planning system (SP) MasterPlan Oncentra Brachy, version 3.3 (Nucletron), on the occasion of its launch, following the recommendations proposed in the Protocol for quality control in planning systems therapy with ionizing radiation [SEFM, published by the Spanish Society of Medical Physics (SEFM) in 2005].

  20. Expert system based on cases for a diagnosis system in real time; Sistema experto basado en casos para un sistema de diagnostico en tiempo real

    Energy Technology Data Exchange (ETDEWEB)

    Espinosa R, Alfredo; Quintero R, Agustin; Zambrano D, S Venecia [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2006-07-01

    This article presents the development of an Expert System based in the Reasoning Based on Cases methodology. Such system was performed with the purpose of creating an information system in charge of supervising and diagnosing the status of the main equipment of fossil fuel power plants for electricity generation. Here is presented the reasons why this methodology was used for the expert system and why Induce-It -the specialized tool that implements it- was also chosen, as well as the analysis made for the disposition of the operative architecture of the Expert System, the very development of this software architecture and, finally, the validation of the correct operation of this system by means of a simulator that simultaneously puts to the test the error handling of the Expert System. [Spanish] Este articulo presenta el procedimiento que siguio el desarrollo de un Sistema Experto asentado en la metodologia de Razonamiento Basado en Casos; realizado con el fin de crear un sistema de informacion encargado de supervisar y diagnosticar el estado de los equipos principales de centrales de generacion termoelectrica. Se expone justificadamente la seleccion de la metodologia del sistema experto y de la herramienta especializada que lo implementa (Induce-It), asi como el analisis realizado para la disposicion de la arquitectura operativa del Sistema Experto, el desarrollo mismo de esta arquitectura del software y, finalmente, la validacion del correcto funcionamiento de este sistema mediante un simulador que a la vez pone a prueba el manejo de errores del Sistema Experto.

  1. Integrating of renewable energy in operation system: the Special Regime Control Centre (CECRE); Integracion de la energia renovable en la operacion del sistema: El Centro de Control de regimen especial (CECRE)

    Energy Technology Data Exchange (ETDEWEB)

    Division, M.

    2007-07-01

    The implementation of Red Electrica de Espana Special Regime Control Centre (CECRE) has demonstrated the Spanish System Operators commitment of integrating the maximum possible wind power generation into the electrical system compatible with secure operation. With this leadership initiative,for the first time in the world, a System Operator Control Centre (CECRE) has succeeded in sending power control instructions to wind power generators over the country through Generation Control Centres (CGC) to which these generators must be connected complying with the Spanish Rules. (Author)

  2. Salud: un sistema complejo adaptativo Health: an adaptive complex system

    Directory of Open Access Journals (Sweden)

    Luis Fernando Toro-Palacio

    2012-02-01

    Full Text Available Este artículo destaca la enorme distancia existente entre el pensamiento complejo de índole intelectual, difundido en nuestro medio, y el pensamiento complejo de índole experimental, que ha permitido lograr los desarrollos científico-tecnológicos que han cambiado radicalmente el mundo. Invita a considerar como sistemas complejos adaptativos entidades tales como la vida, el ser humano, la sociedad global y todo aquello que se llama salud, para lo cual resulta prioritario adoptar un enfoque diferente que amplíe su conocimiento. Al reconocer esta racionalidad, se sustentan las principales características y propiedades emergentes de la salud como sistema complejo adaptativo, siguiendo un modelo de prestación de cuidados y servicios. Finalmente, se plantean algunas preguntas de investigación pertinentes desde esta perspectiva, y se expresan una serie de apreciaciones que se espera sirvan para comprender todo lo que como individuos y como especie hemos llegado a ser. Se propone en este trabajo que la salud y la prestación de servicios de asistencia sanitaria se consideren como sistemas complejos adaptativos.This article points out the enormous gap that exists between complex thinking of an intellectual nature currently present in our environment, and complex experimental thinking that has facilitated the scientific and technological advances that have radically changed the world. The article suggests that life, human beings, global society, and all that constitutes health be considered as adaptive complex systems. This idea, in turn, prioritizes the adoption of a different approach that seeks to expand understanding. When this rationale is recognized, the principal characteristics and emerging properties of health as an adaptive complex system are sustained, following a care and services delivery model. Finally, some pertinent questions from this perspective are put forward in terms of research, and a series of appraisals are expressed that

  3. Sistema de salud de Cuba The health system of Cuba

    Directory of Open Access Journals (Sweden)

    Emma Domínguez-Alonso

    2011-01-01

    Full Text Available En este trabajo se describen las condiciones de salud de Cuba y el sistema cubano de salud, incluyendo su estructura y cobertura, sus fuentes de financiamiento, su gasto en salud, los recursos físicos, materiales y humanos de los que dispone, y las actividades de rectoría e investigación que desarrolla. También se discute la importancia de sus instituciones de investigación y se describe el papel de los usuarios de los servicios en la operación y evaluación del sistema, así como las actividades que en este sentido desarrollan la Federación de Mujeres Cubanas y los Comités de Defensa de la Revolución. La parte final de este trabajo se dedica a discutir las innovaciones más recientes dentro de las que destacan las redes de cardiología, la Misión Milagro y la Batalla de Ideas.This paper describes the health conditions in Cuba and the general characteristics of the Cuban health system, including its structure and coverage, its financial sources, its health expenditure, its physical, material and human resources, and its stewardship functions. It also discusses the increasing importance of its research institutions and the role played by its users in the operation and evaluation of the system. Salient among the social actors involved in the health sector are the Cuban Women Federation and the Committees for the Defense of the Revolution. The paper concludes with the discussion of the most recent innovations implemented in the Cuban health system, including the cardiology networks, the Miracle Mission (Misión Milagro and the Battle of Ideas (Batalla de Ideas.

  4. Sistema de salud de Argentina The health system of Argentina

    Directory of Open Access Journals (Sweden)

    Mariana Belló

    2011-01-01

    Full Text Available En este artículo se describe el sistema de salud de Argentina, que está compuesto por tres sectores: público, de seguridad social y privado. El sector público está integrado por los ministerios nacional y provincial, y la red de hospitales y centros de salud públicos que prestan atención gratuita a toda persona que lo demande, fundamentalmente a personas sin seguridad social y sin capacidad de pago. Se financia con recursos fiscales y recibe pagos ocasionales de parte del sistema de seguridad social cuando atiende a sus afiliados. El sector del seguro social obligatorio está organizado en torno a las Obras Sociales (OS, que aseguran y prestan servicios a los trabajadores y sus familias. La mayoría de las OS operan a través de contratos con prestadores privados y se financian con contribuciones de los trabajadores y patronales. El sector privado está conformado por profesionales de la salud y establecimientos que atienden a demandantes individuales, a los beneficiarios de las OS y de los seguros privados. Este sector también incluye entidades de seguro voluntario llamadas Empresas de Medicina Prepaga que se financian sobre todo con primas que pagan las familias y/o las empresas. En este trabajo también se describen las innovaciones recientes en el sistema de salud, incluyendo el Programa Remediar.This paper describes the health system of Argentina.This system has three sectors: public, social security and private.The public sector includes the national and provincial ministries as well as the network of public hospitals and primary health care units which provide care to the poor and uninsured population. This sector is financed with taxes and payments made by social security beneficiaries that use public health care facilities. The social security sector or Obras Sociales (OS covers all workers of the formal economy and their families. Most OS operate through contracts with private providers and are financed with payroll

  5. Quality control of virtual wedge in a linear electron accelerator with a computerized radiography system (CR); Control de calidad de la cuna virtual en un acelerador lineal de electrones mediante un sistema de radiografia competerizada (CR)

    Energy Technology Data Exchange (ETDEWEB)

    Ordiales, J. M.; Alvarez, F. J.; Falero, B.

    2011-07-01

    For quality control of the virtual wedge there are several systems on the market as arrays of detectors or ionization chambers, linear or 2D configuration, radiochromic films or digital imaging systems incorporated in electron linear accelerators (ALE ). The present work aims at implementing a system of Computed Radiography (CR) for a routine check of the virtual wedge.

  6. Sistema de salud de Nicaragua The health system of Nicaragua

    Directory of Open Access Journals (Sweden)

    Jorine Muiser

    2011-01-01

    Full Text Available En este artículo se describen las condiciones de salud de Nicaragua y las características de su sistema de salud, incluyendo su estructura y cobertura, sus fuentes de financiamiento, los recursos físicos, materiales y humanos con los que cuenta, las actividades de rectoría que desarrolla el Ministerio de Salud, los mecanismos de participación ciudadana en la gestión y evaluación de los sistemas de salud, y la satisfacción de los usuarios con los servicios recibidos. También se discuten las innovaciones más recientes, dentro de las que destacan la promulgación de una nueva Ley General de Salud, la descentralización de la regulación de los establecimientos de salud y el diseño de un nuevo modelo de atención a la salud denominado Modelo de Salud Familiar y Comunitario.This paper describes the health conditions in Nicaragua and discusses the characteristics of its national health system including its structure and coverage, its financial sources its physical, material and human resources the stewardship functions developed by the Ministry of Health the participation of citizens in the operation and evaluation of the system and the level of satisfaction of health care users. It also discusses the most recent policy innovations, including the new General Health Law, the decentralization of the regulation of health facilities and the design and implementation of a new health care model known as Family and Community Health Model.

  7. NFC Aplicado a Sistemas de Controle de Entrada em Eventos

    NARCIS (Netherlands)

    Tomaszewski, Jairo Rodrigo; Formolo, Daniel

    2017-01-01

    This paper discusses current initiatives using NFC technology as substitute of tickets. The objective of this work is to propose a simple and feasible system to control the entering in events, using NFC technology present in smartphones, and evaluate the acceptance of such systems by people. The

  8. Control of quality in the tests of systems of containment of vehicles. Intercomparison of the results of the tests; Control de calidad en los ensayos de sistemas de contencion de vehiculos. Intercomparacion de los resultados de los ensayos

    Energy Technology Data Exchange (ETDEWEB)

    Lopez Ramos, S.

    2009-07-01

    This article tries to offer information on how Central Laboratory of Structures and Materials are made the tests for Marca N of AENOR of the systems of containment of vehicles and its control of external quality. (Author) 15 refs.

  9. Wind energy conversion systems with electric transmission to the water pumping with field control to constant flow; Sistema de conversao de energia eolica com transmissao eletrica para bombeamento de agua com controle de campo a fluxo constante

    Energy Technology Data Exchange (ETDEWEB)

    Nobrega, Juraci Carlos de Castro

    1989-07-01

    The stead-state analysis of a Wind Energy Conversion Systems, consisting on a Windmill, Synchronous Generator, transmission Line and Induction Motor driving a Centrifugal Pump is developed. The performance of the system operating at variable Speed with a flux control is examined using mathematical and digital simulation. The control scheme is proposed and tested in laboratory and a tested in laboratory and a test centre to be compared with simulation results. (author)

  10. Sistema de salud de Guatemala The health system of Guatemala

    Directory of Open Access Journals (Sweden)

    Víctor Becerril-Montekio

    2011-01-01

    Full Text Available En este trabajo se describen las condiciones de salud y el sistema de salud de Guatemala, incluyendo su estructura y cobertura, sus fuentes de financiamiento, las actividades de rectoría que en él se desarrollan, así como las tareas de generación de información en salud e investigación. También se discuten los esfuerzos por ampliar la cobertura de servicios básicos, sobre todo a las comunidades rurales pobres. Destacan dentro de las innovaciones recientes del sistema guatemalteco de salud el Programa de Extensión de Cobertura de Servicios Básicos y el Programa de Accesibilidad de Medicamentos, así como los acuerdos del Ministerio de Salud con organizaciones de la sociedad civil para prestar servicios básicos en comunidades rurales.This paper describes the health conditions in Guatemala and, in more detail, the characteristics of the Guatemalan health system, including its structure en coverage, its financial sources, the stewardship functions developed by the Ministry of Health, as well as the generation of health information and the development of research activities. It also discusses the recent efforts to extend coverage of essential health services, mostly to poor rural areas.The most recent innovations also discussed in this paper include the Program for the Expansion of Coverage of Essential Services, the Program to Expand Access to Essential Drugs and the agreements between the Ministry of Health and several non-governmental organizations to provide essential services in rural settings.

  11. PROJETO DE UM CONTROLADOR PROPORCIONAL-INTEGRAL PARA O SISTEMA DE CONTROLE DE QUALIDADE DO AR E DE UM NOVO SISTEMA DE CONTROLE HVAC

    Directory of Open Access Journals (Sweden)

    Millene Caroline Albino de Oliveira

    2015-09-01

    Full Text Available Uma sala do Perlstein Hall, da Illinois Institute of Techonology, (Chicago, IL, USA possui um sistema de aquecimento, ventilação e ar condicionado (em inglês – HVAC equipado com um sensor de gás carbônico, cujo intuito é regular diretamente a qualidade do ar e assegurar que a sala esteja em condições aceitáveis. Este procedimento, porém, pode colocar uma carga extra no sistema HVAC e aumentar o consumo de energia. Desta forma, o objetivo principal do trabalho foi o desenvolvimento e a aplicação de uma estratégia de controle de temperatura e concentração de CO2 para o sistema em questão, utilizando um controlador Proporcional-Integral (PI. Dados coletados em testes realizados na sala foram utilizados para a estimação dos parâmetros das funções de transferência e dos controladores. Inicialmente, os controladores foram testados separadamente e, em seguida, em conjunto. Pode-se observar que o controlador PI obteve bons resultados, apesar do overshoot e oscilações do sistema já observados pela literatura, conseguindo atingir o set point desejado de temperatura de 70°F e de concentração de CO2 de 150 ppm. Palavras-chave: HVAC, Controle, controlador PI.

  12. New digital control system for the operation of the Colombian research reactor IAN-R1; Nuevo sistema de control digital para la operacion del reactor de investigacion Colombiano IAN-R1

    Energy Technology Data Exchange (ETDEWEB)

    Celis del A, L.; Rivero, T.; Bucio, F.; Ramirez, R.; Segovia, A.; Palacios, J., E-mail: lina.celis@inin.gob.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2015-09-15

    En 2011, Mexico won the Colombian international tender for the renewal of instrumentation and control of the IAN-R1 Reactor, to Argentina and the United States. This paper presents the design criteria and the development made for the new digital control system installed in the Colombian nuclear reactor IAN-R1, which is based on a redundant and diverse architecture, which provides increased availability, reliability and safety in the reactor operation. This control system and associated instrumentation met all national export requirements, with the safety requirements established by the IAEA as well as the requirements demanded by the Colombian Regulatory Body in nuclear matter. On August 20, 2012, the Colombian IAN-R1 reactor reached its first criticality controlled with the new system developed at Instituto Nacional de Investigaciones Nucleares (ININ). On September 14, 2012, the new control system of the Colombian IAN-R1 reactor was officially handed over to the Colombian authorities, this being the first time that Mexico exported nuclear technology through the ININ. Currently the reactor is operating successfully with the new control system, and has an operating license for 5 years. (Author)

  13. Procedure guide of design, construction of prototypes, calibration and sure operation of nucleonic control systems; Guia de procedimientos de diseno, construccion de prototipos, calibracion y operacion segura de sistemas de control nucleonico

    Energy Technology Data Exchange (ETDEWEB)

    Banados Perez, H [Instituto de Pesquizas Energia Nuclear, Sao Paulo (Brazil); Griffith Martinez, J [Instituto de Investigaciones de la Cana de Azucar, La Habana (Cuba); Desdin Garcia, L F [Centro de Estudios Aplicados al Desarrollo Nuclear, La Habana (Cuba); Rodriguez Cardona, R L [Agencia de Energia Nuclear, La Habana (Cuba); Molina, G [Instituto de Investigaciones Nucleares, Mexico City (Mexico); Sebastian Calvo, C [Instituto Peruano de Energia Nuclear, Lima (Peru)

    1999-09-24

    This Guide was elaborated in the mark of the project RLA/8/024 ARCAL XLII 'Industrial Applications of the Tracer Technology and Nucleonic Control Systems'. Its objective is to establish the approaches for the design, the construction, the selection and the procedures for the sure operation of the Nucleonic Control Systems (NCS) in the industry. The NCS is used to control processes to high speeds, materials with extreme conditions or with noxious chemical properties, susceptible materials of being damaged by contact and packed products. In this document is defined the scope of the procedure. The SCN are classified according to: type of radiations, the mobility of the components, the degree of the beams collimation; and in function of the security. The design and construction criteria of the nuclear meters and of the systems of control nucleonic are exposed.

  14. Ten years of advanced control systems in Brazil's most complex refinery: history and future perspectives; Dez anos de sistemas de controle avancado na refinaria mais complexa do Brasil: historia e perspectivas futuras

    Energy Technology Data Exchange (ETDEWEB)

    Pinotti, Rafael; Wanderley, Alexandre; Areal, Oswaldo Fraga; Romeiro, Murillo Terroso; Caneschi, Jose Ricardo [PETROBRAS, Rio de Janeiro, RJ (Brazil)

    2004-07-01

    In 1994 Duque de Caxias Refinery implemented its first Multivariable Predictive Controller (MPC), in the Fluid Catalytic Cracking Unit. The software, then licensed under contract by the DMCC company, used the Dynamic Matrix Control (DMC) technique. This enterprise culminated with the development, by PETROBRAS engineers, of a proprietary MPC. Since 1994, other units have been contemplated with MPC and advanced regulatory projects, which have been suffering adaptations in order to keep pace with new control and information systems (DCS, Data Bank). The Integrated Control Center, designed to host units controlled by DCS, was inaugurated in 1998, allowing a simpler monitoring routine of the MPC systems by control engineers, easing the tuning of regulatory control loops, and helping in the implementation of new MPC projects. This work depicts the evolution of advanced control systems at REDUC, and explores future perspectives and challenges in an ever-changing environment, where new units are constantly being added-up to an already very complex net of more than thirty units. (author)

  15. Metrological control of instruments, equipment and measurement system for ultrasonic meters of flow; Controle metrologico de instrumentos, equipamentos e sistema de medicao para medidores ultra-sonicos de vazao

    Energy Technology Data Exchange (ETDEWEB)

    Palacios, Oscar de

    2004-07-01

    Following the actual tendency to obtaining greater precision in Natural Gas measurement, in the past few years the use of Ultrasonic Flow Meters as Custody Transfer applications has grown significantly. There are several units currently operating in Brazil. The legislation for model approval, measure system certification and periodical metrological control of the above mentioned equipment, is currently under elaboration final stage. It was placed under public inquire through the 'Portaria 037' of 2004 of INMETRO, which proposes the authorization to perform the Metrological control by the Operator, once it has a quality system implemented according NBR ISO 9001-2000 and/or ISO 17025. This paper describes the verification procedure adopted by most of ultrasonic meters manufacturers. It also describes the application of the procedure for create the 'Metrological Control System of the Measurement System' of a 12'' Ultrasonic Meter installed and operating, with 3 years operation's data. (author)

  16. Simulator protection, control and supervision systems: a tool for empowerment of operation and maintenance; Simulador de sistemas de protecao, controle e supervisao: uma ferramenta para capacitacao da operacao e manutencao

    Energy Technology Data Exchange (ETDEWEB)

    Moutinho, J.A.P. [Centrais Eletricas do Norte do Brasil S.A. (ELETRONORTE), Belem, PA (Brazil). Regional de Transmissao do Para. Div. de Engenharia de Automacao, Protecao e Medicao], E-mail: beck@eln.gov.br

    2009-07-01

    The use of digital technology in protection, control and supervision equipment has resulted in the electricity sector companies, new behavior in electrical management systems given his versatility in the implementation of protection system as well as cost reduction in traffic information of power equipment to the man-machine interfaces (MMI) to the system operator. With the capabilities of digital technology it is possible provide simulated systems to allow the training of operations teams of the system, providing resources for development for engineers and maintenance technicians, and above all offer platform for analysis of events in the electrical system. This paper presents the development of a simulator protective relays, control and supervision applied to ELETRONORTE substations. The simulator of protective relays, control and supervision consists of information reproduction in the operator's MMI of the electrical system originated in the units of protection, control and supervision. This information is developed from a software that has the same communication protocol with the original units.

  17. Aplicación de las técnicas de hardware reconfigurable en un sistema digital de control dinámico. Aplicación práctica Parte II; Application of Programmable Hardware Techniques of Digital Control System Development. Workable Application. Second Part

    Directory of Open Access Journals (Sweden)

    Dennis Arce López

    2011-02-01

    Full Text Available Se presenta la aplicación práctica del diseño electrónico en el desarrollo de un sistema de control dinámicode un servomotor lo cual es una novedad científico-técnica en el campo de la energética y en la defensanacional. En el trabajo se expone la funcionalidad y estructura del hardware programable, así como losresultados parciales de la simulación. This paper describes the design of a dynamic control system for servomotor making use of new electronicdevelopment techniques, and represents a novelty on energetic field and national defence. Also describesstructure and functionality of programmable hardware, and partial results of simulation.

  18. Control and Data Acquisitions System for the spanish Beamline (BM25) at the ESRF; Sistema de Control y Acquisicion de Datos para la Linea Espanola (BN25) del ESRF

    Energy Technology Data Exchange (ETDEWEB)

    Pereira Gonzalez, A.; Olalla Garcia, C.; Sanchez Sanz, J.; Castro, G. R.

    2005-07-01

    A new control and data acquisition system has been developed for BM25 Spanish Line at the ESRF. The system is based in VMEbus, Motorola PreP architecture and Linux Operating System and it's linked to a local ETHERNET network which provides the way of communicate with the servers (PC workstations). In these computers, the data are available for general usage in order to analyze them. The data acquisition consists of many channels connected to the VME crates mainly, independent between them, and fully programmable by drivers, CLUI's and GUI's interfaces, and a set of independent systems (embedded ones, PLCs, others) controlling the security aspects. This report is described in terms of their architecture, their electronic system to the process hard ware and the functionality and the application development facilities they provide using the software and the data acquisition. (Author) 18 refs.

  19. Characterization of the voltage control systems and speed of a synchronous machine of high power for short circuit testing; Caracterizacion de los sistemas de control de voltaje y velocidad de una maquina sincrona de alta potencia para pruebas de corto circuito

    Energy Technology Data Exchange (ETDEWEB)

    Segura Ozuna, Victor Octavio; Hernandez Rodriguez, Isaura Victoria; Alcaide Godinez, Indira Xochiquetzal; Garduno Ramirez, Raul; Montero Cervantes, Julio Cesar [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Ruiz Rodriguez, Genaro; Martinez Torres; Ricardo [CFE-LAPEM, Irapuato, Guanajuato (Mexico)

    2012-07-01

    This paper introduces a characterization of the behavior of the speed and voltage control systems of a special purpose synchronous machine (GCC) based on measuring and monitoring physical signals, and recording of the sampled waveforms. Basically, the GCC supplies the energy to perform high-power short-circuits tests to certify electrical equipment and components, as required by the Comision Federal de Electricidad (CFE) in Mexico. The GCC operates alternately as motor and generator. With the GCC operating as motor, speed control during startup, acceleration, re-acceleration and braking is carried out by a static frequency converter (SFC). Complementary, the voltage controller manipulates excitation power to control terminal voltage when the GCC operates as generator and regulates excitation current when the GCC operates as motor. Compared to conventional voltage regulation systems, which must go off in case of short-circuit, the GCC voltage regulator must keep controlling field excitation to maintain the required line current and terminal voltage during short-circuit tests. Monitoring of physical signals was carried out with a portable data acquisition system based on SCXI and PXI digital platforms. A total of 78 signals were monitored with a 6 kHz sampling rate that was enough to obtain detailed signal waveforms. Data captured was processed and plotted for analysis. The signal graphs show the current real behavior of both, the voltage control system and the speed control system, and constitute a precise characterization of their behavior. [Spanish] Este documento presenta una caracterizacion del comportamiento de los sistemas de control de velocidad y voltaje de una maquina sincrona de proposito especial (GCC) basada en la medicion y monitoreo de senales fisicas, asi como en el registro de las formas de onda muestreadas. Basicamente, la GCC suministra la energia para efectuar pruebas de corto circuito de alta potencia para certificar equipo y componentes

  20. Proposta de um sistema de controle da produção para fabricantes de calçados que operam sob encomenda Proposal of a production control system for shoemakers operating in a resources-to-order or make-to-order product market environment

    Directory of Open Access Journals (Sweden)

    Fábio Molina da Silva

    2008-12-01

    Full Text Available Este artigo apresenta uma proposta de sistema de controle da produção para regular o fluxo de materiais de pequenas e médias empresas fabricantes de calçados que adotam a política de atendimento à demanda RTO (resources-to-order ou MTO (make-to-order, trabalhando com uma ampla variedade de produtos finais. Para entender a problemática do PCP (planejamento e controle da produção nesse segmento, foram pesquisadas 7 fábricas de calçados localizadas na cidade de Birigui-SP. A proposta engloba: a a escolha de um ordering system (sistema de coordenação de ordens (SCO; b desenvolvimento de um método para elaboração do programa mestre de produção MPS (master production schedule; e c procedimentos para seqüenciar as ordens de produção.This paper presents a proposal for controlling the production in shoe industries. It aims at regulating the material flow in small and medium enterprises operating in a Resources-to-Order (RTO or Make-to-Order (MTO product market environment with large variety of final products. For a better understanding of Production Planning and Control (PPC problems in this context. Seven shoemakers in the city of Birigui-SP, Brasil were investigated. The proposal includes: (a choosing an ordering system; (b developing a method for elaborating the master production schedule (MPS; and (c establishing procedures for sequencing the production orders.

  1. Los sistemas de autorregulación como mecanismos de control de la publicidad de tabaco: evaluación mediante análisis empírico Self-regulation systems to control tobacco advertising: An empirical analysis

    Directory of Open Access Journals (Sweden)

    Marta Martín

    2004-10-01

    manifiestos no respeta las normas referentes a la leyenda de advertencia. Discusión: A la vista de las «sutilezas creativas» utilizadas por el sector que vulneran las normas autoimpuestas, se plantea la necesidad de controlar la fórmula del autocontrol cuando hay indicios de que un fallo en el sistema puede acarrear consecuencias de peligro para los ciudadanos.Objective: Against the background of the debate aroused by the tobacco advertising ban as a result of Directive 98/43/EC and of the Proposed Directive of 5/9/2001, we aimed to evaluate how self-regulation of tobacco advertising systems has worked in the last 5 years and to evaluate its effectiveness and relevance as a potential tool in public health prevention. Methods: We performed a content and discourse analysis of all advertisements appearing in the Sunday supplements of the three weekly newspapers with the widest circulation in Spain (El País, El Mundo, and ABC between January 1995 and January 2000 to detect infractions of the norms of the self-regulation code of the Spanish Tobacco Association (Asociación Española de Tabaco [AET] regarding: a the identity of models used in advertising; b direct or indirect claims for the therapeutic properties of smoking; c depiction of cigarettes in advertisements, and d printed warnings on advertisements. Results: We examined 910 banners and 369 advertisements. Very few advertisements displayed rational arguments on elements such as price (13% or product components (7%. Although the AET's code was generally respected, the advertisements displayed a series of subtleties that allowed the industry to get around the code: 10 of the 369 advertisements reviewed depicted famous people (mainly pilots and artists and one third of them used iconic personages (Joe Camel or Marlboro Man; one advertisement suggested the therapeutic properties of tobacco and almost all linked smoking with social success and leisure. Although cigarettes were not depicted, 18% of the advertisements

  2. Ejercicio y sistema inmune Exercise and the immune system

    Directory of Open Access Journals (Sweden)

    Pablo Javier Patiño Grajales

    2006-01-01

    Full Text Available Se ha demostrado que el ejercicio hecho a diferentes intensidades cumple una función moduladora sobre diversos sistemas, y que su acción sobre la respuesta inmune es de gran importancia. Por lo tanto, es necesario esclarecer si estos cambios constituyen efectos benéficos o perjudiciales en cuanto a las adaptaciones del hospedero frente a diversos agentes patógenos. El estudio de estos cambios inducidos por el estrés físico puede tener un impacto grande en la comprensión y prevención de algunas enfermedades que involucran la respuesta del sistema inmune como las alergias, las infecciones, las inmunodeficiencias y el cáncer. En este artículo se presenta una revisión actualizada de la información existente al respecto, con el propósito de aportar elementos que ayuden a comprender este fenómeno biológico, así como sus implicaciones para la salud humana. Se han estudiado varios parámetros de la respuesta inmune durante el ejercicio físico, entre ellos su relación con la respuesta hormonal al estrés y el comportamiento de las diferentes hormonas de acuerdo con la intensidad de aquél. También se han evaluado los cambios en las poblaciones de células sanguíneas (linfocitos, monocitos y neutrófilos así como el comportamiento de las citoquinas y la síntesis de inmunoglobulinas específicas. Todo esto ha permitido establecer una relación entre los sistemas inmune y neuroendocrino, la cual explicaría en It has been demonstrated that physical exercise, carried out at diverse intensities, modulates the function of different human body systems, and that it plays a major role in the immune response. Therefore, it is necessary to find out if these changes have benefic or harmful effects on the host adaptation against several pathogenic agents. The study of these physical-stress-induced changes might have a great impact on the comprehension and prevention of some diseases that involve activation of the immune system such as allergies

  3. Design and modernization of the control room with of the new digital I and C systems; El diseno y modernizacion de las salas de control con los nuevos sistemas de I and C digital

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez, L. A.; Ortega, F.; Rejas, L.

    2011-07-01

    The use of the new digital I and c systems in the design of the new nuclear power plants, as well as the modernization of the existing ones, implies relevant changes in the control room design. New I and C systems provide new features that affect the control room operating concept, therefore a detailed analysis is required to take into consideration all the operating and human factor aspects. based on Tecnatom's experience, this article presents the methodological approach used as well as the most relevant aspects of this kind of project. (Author)

  4. Development of a control system for evaluation of renewable power plants in the water pumping; Desenvolvimento de um sistema de controle para avaliacao de fontes de energias renovaveis no bombeamento de agua

    Energy Technology Data Exchange (ETDEWEB)

    Presenco, Jose Fernando [Universidade Estadual Paulista (FCA/UNESP), Botucatu, SP (Brazil). Fac. de Ciencias Agronomicas. Pos-graduacao em Agronomia; Seraphim, Odivaldo Jose [Universidade Estadual Paulista (FCA/UNESP), Botucatu, SP (Brazil). Fac. de Ciencias Agronomicas. Dept. de Engenharia Rural

    2010-07-01

    The use of alternative energy systems in the current days is an urgent necessity due to the problems that the planet is facing as the heating and loss of ozone layer. The scarcity of conventional energy is another problem that must be solved for the future of humanity. It must be considered that the people are inhabiting places moved away not always with available energy. The application of technologies as automation and control can help us to solve this problem. Therefore, this work aimed at apply an equipment of industrial usage, the Programmable Logical Controller, PLC, in alternative energies systems, as eolic generation and photovoltaic generation used for water pumping, aiming the automatic control and the efficiency in the places where it has simultaneous availability of these sources, based in criterion of priority that previously established itself between them. It was made a hydraulic and energetic evaluation of the energy system, eolic and photovoltaic, used in the automatic control system of pumping, in the place of accomplishment of the experiment, according to previously established physical conditions. The results have shown that the control system using the PLC is practicable and has trustworthiness. The program developed can be adapted for the use with several power plants in a specific application place. The photovoltaic system of pumping, using a polycrystalline of 70 Watts connected to a pump Shurflo 8000, showed to be efficient with significant flows in almost all the months. The eolic system of pumping, using an eolic generator of 400 Watts assembled in place of experiment, did not demonstrate energetic capacity for use in this specific type of application. (author)

  5. Modelo de control y vigilancia en sanidad ambiental basados en sistemas de autocontrol

    Directory of Open Access Journals (Sweden)

    Loreto Santa Marina Rodríguez

    2006-12-01

    Full Text Available En el ámbito ambiental el control de los riesgos para la salud está experimentando cambios importantes en lo referente a su concepción y a la forma de gestión de los mismos desde lo servicios de salud pública. Tradicionalmente la Administración Sanitaria ha asumido el papel de garante de las condiciones higiénico-sanitarias de las instalaciones, estableciendo sistemas de control y vigilancia. La tendencia actual es que sean los responsables directos de las instalaciones los que valoren los riesgos de las mismas, establezcan sistemas de control y vigilancia, pasando la Administración Sanitaria a ser el organismo que apruebe y supervise dichos sistemas.

  6. Los sistemas positivos en la Ingeniería Positive systems in Engineering

    Directory of Open Access Journals (Sweden)

    Andrés Quintero Zea

    2010-01-01

    Full Text Available Los sistemas positivos son sistemas en los que las variables de estado sólo toman valores positivos o no negativos. En este artículo de revisión se describe este tipo de sistemas por medio del establecimiento de sus principales propiedades estructurales y la exposición de algunas de sus aplicaciones.Positive systems are systems in which the state variables are always positive or non negative in value. In this review paper, we describe such systems through the establishment of its main structural properties and the exposure of some of its applications.

  7. The impact of the instrumentation and control systems in the safety of a nuclear plant: a general vision; El impacto de los sistemas de instrumentacion y control en la seguridad de una planta nuclear: una vision general

    Energy Technology Data Exchange (ETDEWEB)

    Celis del Angel, L.; Rivero, T., E-mail: lina.celis@inin.gob.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2011-11-15

    One of the fundamental components so much for the sure operation, like in emergency cases or accident are the equipment s and instrumentation and control systems. The nuclear industry has had some accidents where the instrumentation and control have played and important part: a wrong design, instrumentation lack, faulty systems of safety, etc. At the present time the necessity to modernize the instrumentation and control in a nuclear power plant is before the challenge of finding innovative forms to improve the competitiveness and readiness, reducing operation costs without put ing in risk the safety and reliability of the nuclear power plant. Most of the nuclear power plants require actualizing their instrumentation and control systems, here the digital systems represent a great alternative, improving the performance and the safety, increasing the readiness and reducing the maintenance s. However they require of strict tests that allow assuring their application in critical systems. It is also necessary, the development of modernization programs that allow the programmed substitution of the systems without affecting the readiness of the nuclear power plants. During this whole modernization process will be necessary to put special attention in the cyber-safety because the attacks every time they are more elaborated. Therefore will be necessary to go toward the modernization of the instrumentation and control with the challenge of making without detriment some in the safety of the normal operation and with response reliability in emergency conditions or accident that which represents an effort that should not be postponed in the case of the nuclear power plant of Laguna Verde. (Author)

  8. Submicronic Particle Measurement Instrumentation Test Bench Data Acquisition and Control System; Sistema de Toma de Datos y Control de un Banco de Calibracion de Instrumentacion para Medida de Particulas Submicrometricas

    Energy Technology Data Exchange (ETDEWEB)

    Alberdi, J; Barcala, J M; Gomez, F J; Molinero, A; Navarrete, J J [Ciemat. Madrid (Spain)

    1999-05-01

    This document describes the SAD-100 system characteristics. The unit makes the instrumentation test bench data acquisition and control, SAD-100 was designed and developed by Electronic and Automation Area (CIEMAT) and Aerosol Technology in Energy Generation Project (CIEMAT). (Author) 2 refs.

  9. Implementation of the program of quality control of the system on-board imager of varian: initial assessment; Puesta en marcha del programa de control de calidad del sistema on-board imager de varian: evaluacion inicial

    Energy Technology Data Exchange (ETDEWEB)

    Ortega Martin, I.; Ruiz Morales, C.; Lopez Sanchez, F.; Tobarra Gonzalez, B. M.

    2013-07-01

    This work aims to present evidence that are part of our quality control system on-board Imager of Varian, elaborated from recommendations and national and international protocols, as well as a first assessment of the results obtained to date. (Author)

  10. Quality control beam of radiation through imaging system using a flat panel (ILD); Control de calidad de haz de radiacion mediante un sistema de imagen de panel plano (EPID)

    Energy Technology Data Exchange (ETDEWEB)

    Benitez Serrano, J. A.; Gomez Barrado, A.; Sanchez-Reyes, A.

    2013-07-01

    The daily quality checks of the accelerator include, among others, checks of the daily calibration, symmetry and uniformity of the radiation beam. Usually verification systems daily are used for this purpose, which employ arrays of detectors of solid-state or ionization chambers. This paper intends to carry out the control of quality through the irradiation of a number of fields in the portal imaging system and its subsequent analysis in software's own creation, as well as the comparison of results with the daily verification system. (Author)

  11. Sistema distribuido para monitorización y control integrado de edificios

    Directory of Open Access Journals (Sweden)

    Gomes, L.

    1999-02-01

    Full Text Available SUMMARY The works to be presented in this paper are related with information technology application on the intelligent building concept. A distributed system targeted for integrated building monitoring and control will be presented. The system is also able to support business activities and services. The concept of domot introduced (domot = “domus" + "robot" as the third active occupant of the building, coexisting with users and managers, and able to manage resources and be at other occupant disposal. The system relies on the definition of two types of template architectures, to be used as references by the software and hardware parts of the system. The software reference template is based on a heterogeneous distributed network of workstations, running a set of process with interprocess communication based on the client-server paradigm. The hardware reference template is based on a architecture based on two levels of networks; the first one is used for the communication between high-level control workstations (targeted for supervision and monitoring and the second one is targeted to support low-level controllers communcation. These two types of templates constitute the basis for a robust and open system based implementation of an infrastructure that is able to support both business activities and the single occupant wishes, enabling synergistic developments. The user interface, which may run anywhere in the world as far as a TCP-IP connection is available, is hierarchically organised; specific information and dialogues are provided for the monitoring and management of different types of devices and systems installed in the building. The systems already integrated are intrusion, CCTV and PABX. Access control and HVAC will follow in the near future.

    Los trabajos que se presentan en este artículo se relacionan con la aplicación de la tecnología de información en el concepto de edificio inteligente. Será propuesto un sistema

  12. Desenvolvimento De Sistema Inteligente De Controle De Arranjo De Antenas Para Aplicação No Sistema Celpe

    OpenAIRE

    OLIVEIRA, Elias Marques Ferreira De

    2016-01-01

    Este trabalho de dissertação apresenta a concepção e implantação de um sistema controlador de arranjo de antenas capaz de integrar-se a uma rede de comunicação SCADA e direcionar o diagrama de radiação de um arranjo de antenas, garantindo melhor comunicação entre estação base e remota. É apresentado um circuito de RF capaz de realizar o controle automático das fases de alimentação de um arranjo de antenas composto por diversos dispositivos de RF, incluindo um defasador de 8 bits. São apresent...

  13. Sistema de salud de Bolivia The health system of Bolivia

    Directory of Open Access Journals (Sweden)

    Carmen Ledo

    2011-01-01

    Full Text Available En este trabajo se describen las características generales del sistema de salud de Bolivia: su organización y cobertura; sus fuentes de financiamiento y gasto en salud; los recursos físicos, materiales y humanos de los que dispone; las actividades de rectoría que desarrolla, y el nivel que ha alcanzado la investigación en salud. También se discuten las innovaciones más recientes que se han llevado a cabo en los últimos años, incluyendo el Seguro Universal Materno Infantil, el Programa de Extensión de Cobertura a Áreas Rurales, el Modelo de Salud Familiar, Comunitaria e Intercultural y el programa de subsidios monetarios Juana Azurduy, dirigido a fortalecer la atención prenatal y del parto.This paper describes the Bolivian health system, including its structure and organization, its financing sources, its health expenditure, its physical, material and humans resources, its stewardship activities and the its health research institutions. It also discusses the most recent policy innovations developed in Bolivia: the Maternal and Child Universal Insurance, the Program for the Extension of Coverage to Rural Areas, the Family, Community and Inter-Cultural Health Model and the cash-transfer program Juana Azurduy intended to strengthen maternal and child care.

  14. Automated system of control of radioactive liquid effluents of patients submitted to therapy in hospitals of nuclear medicine (SACEL); Sistema automatizado de control de efluentes liquidos radiactivos de pacientes sometidos a terapia en hospitales de medicina nuclear (SACEL)

    Energy Technology Data Exchange (ETDEWEB)

    Ruiz C, M A; Rivero G, T; Celis del Angel, L; Sainz M, E; Molina, G [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    2006-07-01

    Different hospitals of nuclear medicine require of the technical attendance for the design, construction and instrumentation of an effluents retention system coming from the room dedicated to the medical application of iodine 131, with the one object of giving execution to the normative requirements of radiological protection, settled down in the General Regulation of Radiological Safety (RGSR) emitted by the CNSNS in November, 1988 and in the corresponding official standards. An automatic system of flow measurement, the activity concentration of the effluents to the drainage, the discharges control and the automated report it will allow the execution of the national regulations, also the elimination of unhealthy activities as the taking of samples, analysis of those same and the corresponding paperwork, its will allow that the SACEL is capable of to carry out registrations that are to consult in an automated way. The changes in the demands of the National Commission of Nuclear Safety and Safeguards in relation to the liberation of radioactive material in hospitals by medical treatments, it has created the necessity to develop a system that quantifies and dose the liquid effluents of people under thyroid treatment with iodine-131 to the drainage. The Automated System of Control of radioactive liquids effluents generated in Hospitals of Nuclear Medicine (SACEL) developed in the National Institute of Nuclear Research, it fulfills this regulation, besides improving the work conditions for the medical and technical personnel of the hospital in that are installed, since this system has the advantage of to be totally automated and to require of a minimum of attendance. The SACEL is an electro-hydraulic system of effluents control, based in the alternate operation of two decay deposits of the activity of the material contaminated with iodine-131. The system allows to take a registration of those volumes and liberated dose, besides being able to be monitoring in remote

  15. A methodology for obtaining the control rods patterns in a BWR using systems based on ants colonies; Una metodologia para obtener los patrones de barras de control en un BWR usando sistemas basados en colonias de hormigas

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz S, J.J. [Depto. de Sistemas Nucleares, ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico); Requena R, I. [Universidad de Granada, 18071 Granada (Spain)]. e-mail: jjortiz@nuclear.inin.mx

    2003-07-01

    In this work the AZCATL-PBC system based on a technique of ants colonies for the search of control rods patterns of those reactors of the Nuclear Power station of Laguna Verde (CNLV) is presented. The technique was applied to a transition cycle and one of balance. For both cycles they were compared the k{sub ef} values obtained with a Haling calculation and the control rods pattern proposed by AZCATL-PBC for a burnt one fixed. It was found that the methodology is able to extend the length of the cycle with respect to the Haling prediction, maintaining sure to the reactor. (Author)

  16. Condiciones de monitoreo para sistema de control de motores de combustión interna

    Directory of Open Access Journals (Sweden)

    Elio Rafael Hidalgo-Batista

    2016-01-01

    Full Text Available En el presente trabajo se presentan las insuficiencias existentes en el sistema de control de los motores de combustión interna pertenecientes a los grupos electrógenos, estas insuficiencias se determinaron luego de un análisis realizado al surgimiento de las fallas y a este sistema. Para la mejora del mismo se da a conocer un procedimiento que permite el seguimiento y procesamiento de las condiciones de monitoreo de estos equipos, el uso de este procedimiento ha permitido: definir los patrones de fallo de las tres variables (de ocho que se estudian que con mayor probabilidad se relacionan con el surgimiento de los fallos, mejorar el método comparativo y dos insuficiencias del sistema de control.

  17. Emergency control scheme reevaluation and proposal of a new project to prevent voltage collapse in the metropolitan system; Reevaluacion del esquema de control de emergencia y propuesta de um nuevo esquema para evitar colapso de tension en el sistema metropolitano

    Energy Technology Data Exchange (ETDEWEB)

    Escudero Scavone, Francisco [ANDE - Administracion Nacional de Electricidad, Asuncion (Paraguay)]. E-mail: OS_EE03@ande.gov.py

    2001-07-01

    This article presents emergence control schemes implemented in the subsystem 1 (SS1) which makes part of the ANDE system. These schemes seek to maintain the system in operation when simple contingencies take place in one among the five circuits which compose the main transmission trunk. The reasons for their implementation are linked to the end of the transmission capacity and problem of reactive losses which support the system voltage, therefore producing a general voltage drop which can take to the undesirable phenomenon of system voltage collapse. The scheme replies to the overloads in emergency regimen, through the necessary load disconnections to reestablish the balance between the load and reduced transmission capacity using an automatic, quick and efficient way.

  18. Remote Control System of the TJ-II Microwave Transmission Lines Mirrors; Sistema de Control Remoto de los Espejos de las Lineas de Transmision de Microondas del TJ-II

    Energy Technology Data Exchange (ETDEWEB)

    Lopez Sanchez, A.; Fernandez, A.; Cappa, A.; Gama, J. de la; Olivares, J.; Garcia, R.; Chamorro, M.

    2007-09-27

    The ECRH system of the TJ-II stellarator has two gyrotrons, which deliver a maximum power of 300 kW each at a frequency of 53.2 GHz. Another 28 GHz gyrotron will be used to heat the plasma by electron Bernstein waves (EBWH). The microwave power is transmitted from the gyrotrons to the vacuum chamber by two quasi-optical transmission lines for ECRH and a corrugated waveguide for EBWH. All transmission lines have an internal movable mirror inside the vacuum chamber to focus the beam and to be able to change the launching angle. The control of the beam polarization is very important and the lines have two corrugated mirrors, which actuate as polarizers. In this report the control system of the position of these three internal mirrors and the polarizers of the EBWH transmission line is described. (Author) 20 refs.

  19. Controle de plantas daninhas na cultura da soja através do herbicida acetochlor em sistemas de semeadura direta e preparo convencional Weed control in soybean crop using the herbicide acetochlor under direct seeding and conventional system

    Directory of Open Access Journals (Sweden)

    M.V.W. Ferri

    2002-08-01

    Full Text Available O manejo do solo altera a bioatividade dos herbicidas residuais e influi na persistência, na eficácia de controle das plantas daninhas e na fitotoxicidade para as culturas. Um experimento foi conduzido na Faculdade de Agronomia da Universidade Federal do Rio Grande do Sul, com objetivo de avaliar a eficácia de controle das plantas daninhas pelo herbicida acetochlor aplicado em solo Argissolo Vermelho sob semeadura direta e preparo convencional. O delineamento experimental foi o de blocos casualizados com quatro repetições em parcelas subsubdivididas. O acetochlor foi utilizado nas doses de 0, 1.680, 2.520, 3.360 e 4.200 g ha¹. Foi avaliado o controle das plantas daninhas aos 15, 30 e 45 dias após aplicação do acetochlor (DAT. Foram avaliados também a injúria na cultura da soja aos 14, 21 e 28 DAT e a matéria seca das plantas daninhas aos 40 e 60 DAT. O herbicida acetochlor foi mais eficiente no controle das plantas daninhas no solo sob preparo convencional que sob semeadura direta. A produção de matéria seca dessas plantas foi menor no preparo convencional comparado à semeadura direta. Não ocorreu injúria à cultura da soja.Soil management affects herbicide bioactivity and changes persistence, weed control and crop selectivity. An experiment was carried out at the Federal University of Rio Grande do Sul - Brazil, to evaluate the efficacy of the herbicide acetochlor in controling weeds in a Paleudult soil under direct seeding and conventional system. The following treatments were tested: acetochlor at 0, 1,680, 2,520, 3,360 and 4,200 g ha-1, applied under tillage and no-till systems. Assessments included crop injury at 14, 21 and 28 days after acetochlor aplication, weed dry matter at 40 and 60 days after herbicide aplication and weed control at 15, 30 and 45 days after acetochlor aplication. Acetochlor was more efficient under conventional than direct seeding system. Weed dry biomass was lower under conventional than direct

  20. Coordination of motor systems of the control bars of TRIGA Mark III reactor, through the use of a PLC; Coordinacion de los sistemas motrices de las barras de control del reactor Triga Mark III, mediante el uso de un PLC

    Energy Technology Data Exchange (ETDEWEB)

    Castro R, P. R.

    2016-07-01

    The use of programmable logic controllers (PLCs) has a wide field in the realization of automatic systems, since is sought that the form of control is easy for any user. In this work, the TRIGA Mark III reactor of Instituto Nacional de Investigaciones Nucleares (ININ) is intended to operate with a programming code in PLC for the automation of the control rods, having uniform wear according to the power required by the user. On the other hand, is proposed to develop an HMI graphical interface for communication via Ethernet, allowing supervision during the reactor operation process and greater protection of operators during reactor startup. The accuracy of the new actuators, as well as their durability, will allow a good performance of the reactor for many years to come. (Author)

  1. Development of computational program for studying the reactor control system in PWR plants; Desenvolvimento de um programa computacional para estudo do sistema de controle do reator em plantas PWR

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Jose Ricardo de; Soares, Adalberto Jose [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil)

    2002-07-01

    In this work a computational program is presented which has been developed for specific application on the study of the reactor control system of a typical PWR plant. As to the basic function of simulating power transients the program has the following structure: a representative mathematical model of the dynamic and stationary behaviors of the primary circuit; a group of equations associated to the reactor power control and system pressure control; screens for the entry of reference data as well as of control blocks and control bar speed programming module parameters; main entering screens for the configuration of the excitement/transient function as well as of simulation time and control mood; and graphical output of all the process variables incorporated to the model. As premise it has been considered as sufficient the modeling of the primary circuit, a differential equation being used which associates the average temperature of the coolant within the steam generator with the potency transferred to the secondary circuit, denominated 'secondary potency', as an interface with the secondary circuit. Every transient - ramp or step - is established upon the 'turbine power' variable, which in turn is related to the 'secondary power' variable by means of a differential equation that represents a first - order delay, having adjustable parameters on the data - entry screen. In the neutronic model as defined for the reactor, the reactivity feedback effects due to primary circuit pressure variation, as well as fuel and coolant temperature variation, were taken into consideration. Thermo-hydraulics constants and project data taken from the available bibliography, adapted to a particular small PWR unit conception , were employed for loading the program. With the open-loop simulation results a positive qualitative evaluation of the program was obtained, in comparison to published results related to simulators bearing equal purposes, more

  2. Simplified system for the pressure control of a Nucleo electric central of the BWR type; Sistema simplificado para el control de presion de una central Nucleoelectrica del tipo BWR

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez J, J. [FI-UNAM, DEPFI Campus Morelos, Jiutepec, Morelos (Mexico)

    2003-07-01

    One of the main preoccupations of the electric power generator stations is the appropriate operation of the same ones. The operators must be qualified to respond in an adequate way and to be able to take to these power stations to an optimal, sure and stable operation condition under any circumstance. The Laboratory of Analysis in Nuclear Reactors Engineering (LAIRN) of the Engineering Faculty of UNAM (Fl) in collaboration with the International Atomic Energy Agency (IAEA), it develops an interactive classroom simulator in which simulations of the phenomena which take place in a nuclear power station are executed. The classroom simulator bases its operation on specialized nuclear codes feeding interactive graphic unfolding with those that it is possible to make a monitoring, supervision and control of the behavior of the power station under any operation regime, either in normal operation, transitory events or postulated accident sequence. The development of this classroom simulator includes a modular and re configurable structure. Due to it is indispensable to count with a higher inter activity with the system it is included the simulation of the control system of the plant and inside the same, one of those more important it is the reactor pressure control system. The present work describes the conceptual design and the used methodology for the development and implementation in the simulator of a simplified model of the pressure control system for a BWR generic central. The reach of the development will allow to accomplish the necessary tests to demonstrate that this has an adequate performance according to the carried out simplifications. (Author)

  3. Sistemas multi–modales de profundidad restringida Multi-modal systems of restricted depth

    Directory of Open Access Journals (Sweden)

    Manuel Sierra A.

    2008-12-01

    Full Text Available Se presentan como extensiones del cálculo proposicional clásico, la jerarquíade sistemas deductivos SMM–n con n > 1. SMM–n es el sistema multi–modalde profundidad–n. El sistema SMM–1 es el cálculo proposicional clásico. Elsistema SMM–(n + 1 puede ser visto como el resultado de aplicar la regla denecesariedad, asociada a los razonadores con suficiente capacidad de razona-miento, una vez a los teoremas del sistema SMM–n. El sistema SMM resultade la reunión de los sistemas de la jerarquía, y puede ser visto como el sis-tema de lógica multi–modal Km con restricciones. Los sistemas SMM–n soncaracterizados con una semántica al estilo Kripke, en la cual, la longitud delas cadenas de mundos posibles se encuentra restringida.They are presented as extensions of the classical propositional logic, the hierarchy of deductive systems SMM–n with n > 1. SMM–n is the multi–modal system of depth–n. The system SMM–1 is the classical propositional logic. The system SMM–(n + 1 it can be seen as the result of applying the necesariedad rule, associated to the reasoners with enough reasoning capacity, once to the theorems of the system SMM–n. The system SMM is of the union of the systems of the hierarchy, and it can be seen as the system of logic multimodal Km with restrictions. The systems SMM–n are characterized with a semantics to the style Kripke, in the one which, the longitude of the chains of possible worlds is restricted.

  4. New system for measuring and controlling the maximum pressing pressure in the holes of the mould: ISOPRESS; Nuevo sistema para la medida y control de la presion maxima de prensado en los alveolos del molde: ISOPRESS

    Energy Technology Data Exchange (ETDEWEB)

    Poyatos, A.; Bonaque, R.; Mallol, G.; Boix, J.

    2012-07-01

    The organization MACER, in collaboration with the Institute of Ceramic Technology, has developed the system ISOPRESS, an integrated control device that permits to equal automatically the maximum pressure applied on the powder contained in each of the holes of the mould. This system consists of a set of pressure transducers which are located in the isostatic punches of the mould itself. With them it is possible to register in real-time the evolution of the measured pressure of the oil contained in the compensation chamber of each punch. All the transducers are connected to a data acquisition system which transfers the pressure values to a PC which performs the signal processing to obtain the pressure maximum value reached during a pressing cycle, in each one of the holes. The system is completed with a control software especially developed, that permits to regulate individually the height of the first fall of each inferior punch to guarantee the uniformity of the pressure applied in all the holes. ISOPRESS, by assuring the constancy of the bulk density of all the pieces processed, guarantees a unique piece size and minimize production problems associated to the variability of the bulk density of the pieces. (Author)

  5. UN NUEVO ENFOQUE DEL CONTROL POR MODO DESLIZANTE PARA SISTEMAS MULTIVARIABLES

    Directory of Open Access Journals (Sweden)

    Rafael Angel Orellana Prato

    2016-09-01

    Full Text Available Este trabajo presenta el diseño de un sistema de control por modo deslizante (SMCr basado en alimentación adelantada (feedforward aplicado a un sistema multivariable, sintonizado para especificaciones de la respuesta transitoria, usando modelos de primer orden más tiempo muerto (POMTM. Como caso de estudio se presenta el modelo multivariable de dos entradas y dos salidas de una columna de destilación Wood and Berry, la cual presenta un alto índice de interacción. Las pruebas demostraron que la estrategia de control propuesta mejora el desempeño de un sistema de control multivariable ante cambios en los valores de referencia y rechazo a las perturbaciones, sin embargo, el tiempo de establecimiento de las variables controladas aumenta producto de dinámica considerada en el desacoplamiento. Se comprobó que en sistemas con alta interacción las señales de control tienen cambios más suaves lo que indica menor desgaste en los elementos finales de control.

  6. Development of a dosimetric system for the quality control of breast cancer treatments; Desenvolvimento de um sistema dosimetrico para o controle de qualidade nos tratamentos de cancer de mama

    Energy Technology Data Exchange (ETDEWEB)

    Chaves, Roberio C.; Crispim, Verginia R., E-mail: rchaves@nuclear.ufrj.br, E-mail: verginia@nuclear.ufrj.br [Coordenacao dos Programas de Pos-Graduacao de Engenharia (PEN/COPPE/lUFRJ), RJ (Brazil). Programa de Pos-Graduacao em Engenharia Nuclear; Rosa, Luiz A.R. da, E-mail: Irosa@ird.gov.br [Instituto de Radioprotecao e Dosimetria (IRD/CNEN), Rio de Janeiro, RJ (Brazil); Santos, Delano B.V., E-mail: delano@inca.gov.br [Instituto Nacional do Cancer (INCA/MS), Rio de Janeiro, RJ (Brazil)

    2013-11-01

    A system for evaluating the values of absorbed dose in breast teletherapy was developed, using thermoluminescent dosimeters (TLD-100), to compare them to those provided by Therapy planning system. A breast phantom was made to distribute the dosimeters TL shaped chip in breast volume and irradiate it under the same conditions of planning. Three different techniques of teletherapy were considered: one with irradiation from a therapy unit of {sup 60}Co and two with an X-ray beam coming from a 6 MV linear accelerator. Doses measures allowed checking that the performance of the quality control system used in breast cancer treatment is appropriate, since the planned doses differed about 1.5% of the responses provided by TL dosimeters.

  7. Implementación de un sistema de control de acceso basado en reconomiento facial

    OpenAIRE

    Poveda, Martín; Merchán, Fernando

    2016-01-01

    "En este artículo se presentan aspectos de la implementación de un sistema de control de acceso basado en reconocimiento facial. El mismo verifica en tiempo real si las personas que entran a las instalaciones forman parte de la base de datos del personal que labora en las mismas. Las condiciones de operación de este sistema son no colaborativas. Es decir, los usuarios no se ubicarán en posiciones específicas para la adquisición de las imágenes. Para solventar las dificultades que esto pued...

  8. Sistema de comunicaciones para el control de una planta de biocombustible

    OpenAIRE

    SIGNES PALOP, JOSEP FELIP; Sempere Paya, Víctor Miguel; COLL LOZANO, CATERINA

    2012-01-01

    Tras el análisis exhaustivo de los protocolos más importantes, y con el objetivo de escalar la tecnología presente en la planta Perseo Bioethanol de Imecal, en la que se transforma la fracción orgánica de los residuos sólidos urbanos en un biocombustible líquido de segunda generación, para el diseño de un nuevo sistema de comunicaciones se escogió la tecnología Profinet. Signes Palop, JF.; Sempere Paya, VM.; Coll Lozano, C. (2012). Sistema de comunicaciones para el control d...

  9. Sistema automatizado para el control de las inversiones en las redes eléctricas.

    OpenAIRE

    Maylín Díaz Pardillo; María Ela Díaz Gómez; Orlando Brunet Arias

    2015-01-01

    El presente trabajo investigativo abarca las etapas de la automatización del proceso de control en la ejecución de las inversiones que se realizan en las redes del Sistema Electroenergético Nacional, integrado al Sistema Integral de Gestión de Redes de la Unión Eléctrica. Para el desarrollo de la aplicación se llevaron a cabo las etapas del proceso de desarrollo de software, según lo especifica el Proceso Unificado de Desarrollo (RUP), utilizándose como herramienta de modelado para el análisi...

  10. Construindo um modelo de sistema de cuidados Construyendo un modelo de sistema de cuidados Developing an explanatory theoretical model of system of care

    Directory of Open Access Journals (Sweden)

    Alacoque Lorenzini Erdmann

    2007-06-01

    Full Text Available OBJETIVO: Construir um modelo teórico explicativo de Sistema de Cuidados. METODO: Estudo exploratório qualitativo apoiado nos pressupostos da Grounded Theory. Participaram do estudo 15 profissionais e os dados foram coletados por entrevista aberta. RESULTADOS: O Modelo teórico foi delimitado a partir do fenômeno Construindo o Sistema Complexo de Cuidados determinado pelas categorias: Convivendo com a dinamicidade do sistema de cuidados e Organizando o sistema de cuidados a partir de múltiplas interações. CONCLUSÃO: O modelo de sistema de cuidados apresentou-se como sistema vital e dinâmico construído a partir de redes interacionais de vários saberes do agir humano expresso pelo trabalho compartilhado, multidisciplinar e em equipe.OBJETIVO: Construir un modelo teórico explicativo de Sistema de Cuidados. MÉTODO: Se trata de un estudio cualitativo exploratorio apoyado en las premisas de la Teoría Fundamentada en los Datos. Participaron del estudio 15 profesionales. Los datos fueron recolectados por medio de una entrevista abierta. RESULTADOS: El modelo teórico se delimitó al fenómeno Construyendo el Sistema Complejo de Cuidados determinado por las categorías: Viviendo junto con la dinamicidad del sistema de cuidados y Organizando el sistema de cuidados a partir de interacciones múltiples. CONCLUSIÓN: El modelo de sistema de cuidados se presenta como un sistema vital y dinámico construido a partir de redes de interacción de conocimientos del actuar humano expresado en el trabajo conjunto, multidisciplinario y en equipo.OBJECTIVE: To develop an explanatory theoretical model of the system of care. METHOD: Grounded theory served as the conceptual framework to conduct this qualitative exploratory study. Unstructured interviews were conducted among 15 care professionals. RESULTS: The theoretical model was delimited from the phenomenon "building complex system of care" as determined by the following categories: "dealing with a

  11. Sistema de controle de projetos: a utilização de uma contabilidade de projetos como sistema de controle financeiro

    OpenAIRE

    Matta, Marta Villares Ribeiro

    1982-01-01

    Esta dissertação baseia-se nas experiencias desenvolvidas em uma empresa privada nacional, e num extenso trabalho de pesquisa bibliográfica, no sentido de reforçar ou questionar suas principais proposições. A proposição de um sistema de controle financeiro de projetos, através de uma "contabilidade de projetos", analisando-se suas principais vantagens e restrições. São enfocados também outros aspectos referentes a elaboração de projetos, a sua gerência, as rotinas administrativas de controle ...

  12. Development of a software for the control of the quality management system of the TRIGA-Mark III reactor; Desarrollo de un software para el control del sistema de gestion de calidad del reactor TRIGA Mark III

    Energy Technology Data Exchange (ETDEWEB)

    Herrera A, E. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico); Hernandez, L.V.; Hernandez, J.A. [UAEM, Depto. de Ingenieria en Computacion, 50000 Toluca, estado de Mexico (Mexico)]. e-mail: eha@nuclear.inin.mx

    2006-07-01

    The quality has not only become one of the essential requirements of the product but rather at the presenme it is a strategic factor key of which depends the bigger part of the organizations, not only to maintain their position in the market but also to assure their survival. The good organizations will have processes, procedures and standards to confront these challenges. The big organizations require of the certification of their administration systems, and once the organization has obtained this certification the following step it is to maintain it. The implementation and certification of an administration system requires of an appropriate operative organization that achieves continuous improvements in their operation. This is the case of the TRIGA Mark III reactor, which contains a computer program that upgrades, it controls and it programs activities to develop in the Installation, allowing one operative organization to the whole personnel of the same one. With the purpose of avoiding activities untimely. (Author)

  13. Development of a numerical simulator to control the liquid level of a subsea separator system; Dsenvolvimento de simulador numerico para controle de nivel de um sistema de separacao submarina

    Energy Technology Data Exchange (ETDEWEB)

    Shiguemoto, Denis; Rodrigues, Vinicius Mastelaro [DPR Engenharia, Campinas, SP (Brazil); Tsukada, Raphael; Mendes, Jose Ricardo Palaquim [Universidade Estadual de Campinas (UNICAMP), SP (Brazil); Serapiao, Adriane Beatriz de Souza [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Sao Paulo, SP (Brazil); Estevam, Valdir [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)

    2012-07-01

    The challenges posed by recent discoveries of oil accumulations at bigger distances from the cost and ultra deep water depths (above 2500 meters) have stimulated the development of technologies and equipment to overcome these challenges. A major technological issue is the need for larger vessels capable of withstanding the weight of installed equipment and pipe production, which significantly increase the manufacturing cost which is already of the order of billions of dollars. The oil industry has focused efforts on developing solutions aimed to reduce weight installed on production platforms. In this context the Subsea Separation Systems was developed in order to carry out the primary processing under the water, thereby reducing the processing plant installed in the oil production platforms. It is a biphasic (liquid and gas) separator that sends the phases to the platform by means of independent pipes. This paper presents a numerical simulator developed to understand the behavior of the liquid level inside the Subsea Separations Systems for its operating conditions. A control system for liquid level was tested and evaluated considering the behavior of fluids within the Subsea Separation System and the pipes that carry them to the production unit. The numerical simulator developed allows a quick and practical understanding of the behavior of the liquid level inside the equipment and also the behavior of pressure and flow within the production pipe which produce benefits for the development design. (author)

  14. Quality control of dosimetric systems using thermoluminescent crystals; Control de calidad de un sistema de planeacion dosimetrico utilizando cristales termoluminiscentes y su aplicacion en tratamientos de pacientes con cancer de prostata

    Energy Technology Data Exchange (ETDEWEB)

    Mahecha, L.; Plazas, M. C.; Machado, M.; Perea, M. D.

    2006-07-01

    To achieve an optimal tumoral control to prostate cancer in early and locally advanced stages, it is necessary to increase the dose with a low mobility probability at the vesicle an rectal level. This is achieved through conformal radiotherapy. The Instituto Nacional de Cancerologia uses this technique, but two questions arise from the medical-physicists and medical radio-oncologist: In accordance with clinical protocols, the conformal radiotherapy delivers a low dose to the adjacent healthy tissues. What experimental method exists that can prove with certainly the veracity of this affirmation?. And, Do the dosimetric simulation system calculate suitable the dose for each tissues?. Through thermoluminescent dosimetry and the use of a physical simulator,we measured the absorbed dose at the target volume and the adjacent tissues using conformal and conventional radiotherapy. We proved that organs such as the rectum and bladder, receiver a minor dose in conformal radiotherapy, hence reducing their mobility probability. In addition, the readings from the thermoluminescent dosimeters and the doses calculated by the ECLIPSE dosimetric system were compared, concluding that the patient's prescribed dose is effectively delivered as recommended by the quality control program in radiotherapy. (Author)

  15. Smart location system; Sistema de localizacao inteligente Smart Location System

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Jose Augusto Pereira da; Antunes, Rodrigo de Castro; Azevedo, Fabio Augusto Ferreira de [PipeWay Engenharia, Rio de Janeiro, RJ (Brazil); Afonso, Orlando de Jesus Ribeiro [Instituto de Pesquisas da Marinha, Rio de Janeiro, RJ (Brazil); Matsuura, Minoru; Santa Cruz, Sergio de Freitas [TRANSPETRO - PETROBRAS Transportes, Rio de Janeiro, RJ (Brazil); Santos, Jose Alberto Costa dos; Hashiguchi, Decio Issao [GDK Engenharia (Brazil)

    2003-07-01

    This paper describes the technology used in the Intelligent Location System developed by Pipeway and includes some of the results already obtained optimizing repair time and logistic costs during the location of anomalies detected by intelligent pigs, a joint operation within the scope of the contract for Sub sea Pipeline Recovery in the Guanabara Bay with PETROBRAS/TRANSPETRO and GDK Engenharia. The system uses the ELF (Extra Low Frequency) transmission and reception technology at points near a pipe, with or without concrete coating, whose signals are recorded in the inspection tool memory to accurately establish reference points, thus preventing excessive dig work or dredging when human and operational risks tend to be high. (author)

  16. Controllable Pulse Frequency and Width System for Pulsing and Modulating Fast-Neutron Core Assemblies; Systeme a Frequence et Largeur d'Impulsions Ajustables Permettant la Pulsation et la Modulation de Milieux Multipliants Sous-Critiques a Neutrons Rapides; Sistema reguliruemykh chastoty i shiriny impul'sa, dayushaya impul's i modulyatsiyu razmnozhayushchikh sred na bystrykh nejtronakh; Sistema de Frecuencia y Amplitud de Impulso Ajustables, para Pulsar y Modular

    Energy Technology Data Exchange (ETDEWEB)

    Duquesne, M.; Lyon, F.; Schmitt, A. [Association Euratom-CEA-SECNR (France); Nucleaires de Cadarache, Centre d' Etudes [France; Gerbier, R. [Laboratoire des Accelerateurs - CEN de Grenoble (France); Nucleaires de Cadarache, Centre d' Etudes [France

    1965-10-15

    The authors describe a system for producing neutron bursts of independently controllable width and frequency. The rise and quenching times of these bursts are of the order of a few nanoseconds. The system is applied to high-frequency pulsed and modulated experiments. Rapidly quenched neutron bursts are produced by deflection of a pure deuteron beam which has previously been accelerated and sorted. Ions other than atomic deuterons are removed after acceleration in a 10 Degree-Sign magnetic sorting field. Consideration is also being given to a pre-acceleration sorting system offering the advantage of reduced bulk. The deuteron beam passes through the space between two plates where there is normally an electrostatic field which deflects the beam onto the surfaces of a diaphragm. Application of a very high potential pulse to the first plate cancels the field and thus brings the beam rapidly onto the neutron-producing target (beginning of the burst). The second plate then receives a pulse of the same type which restores the field and removes the beam from the target (end of the burst). The pulse rise time is of the order of 10 ns; disappearance from the target is faster. The duration of the burst can be controlled as required within reasonable limits by suitably increasing the interval between the two pulses. In some cases ion transit time in the plates is not negligible in relation to the duration of the step applied to them. In such cases, one of the plates is replaced by a travelling wave line to which the two pulses are applied successively. The potential pulse thus accompanies the deuteron cluster producing the burst. The burst times can thus be reduced below 4 ns. The first stages of the voltage step generators are transistorized. The output tubes are sealed-disc valves providing a 1500-V step in a few nanoseconds. A 50-MHz double tetrode is employed for pulses for the delay line. A detection system comprises a scintillator-photomultiplier device incorporating a

  17. Análise preliminar do Sistema de Informação do Programa de Controle da Esquistossomose no período de 1999 a 2003 Preliminary analysis of the Information System in the Brazilian Schistosomiasis Control Program, 1999-2003

    Directory of Open Access Journals (Sweden)

    Leila Maria Mattos de Farias

    2007-01-01

    Full Text Available O estudo teve como objetivo a análise preliminar do Sistema de Informação do Programa de Controle da Esquistossomose (SISPCE, na Bahia, Sergipe, Alagoas e Pernambuco, Brasil, entre 1999 e 2003. Houve queda acentuada da entrada de dados no período da descentralização, com aumento gradativo dos registros, à exceção de Pernambuco que apresenta um sub-registro importante. Os dados do SISPCE-DATASUS e IBGE são insuficientes para construção de indicadores para o monitoramento das formas graves da endemia e outros aspectos que possam relacionar as condições de saneamento com a ocorrência da doença. A reformulação do sistema de informações é fundamental para a efetivação das ações de controle diante da nova realidade do sistema de saúde. Esse deve ser repensado de forma a integrar-se às políticas de saúde em consonância com as diretrizes do SUS, utilizando metodologia de coleta de dados sistemática, adequada às especificidades locais, possibilitando comparações e avaliações prospectivas, além da construção de novos indicadores com ênfase na morbidade e nos determinantes da endemia e da adoção de unidades de análise que venham a expressar a real situação da esquistossomose nos Estados.This study provides a preliminary analysis of the Information System in the Schistosomiasis Control Program (SISPCE in the States of Bahia, Sergipe, Alagoas, and Pernambuco, Brazil, from 1999 to 2003. The data analysis suggests a sharp decline in data entry in the system during the transition period involving health services decentralization, followed by a gradual increase. Major under-recording was observed in Pernambuco. SISPCE-DATASUS and IBGE (National Census Bureau data are insufficient to construct a surveillance index for serious forms of the endemic disease and other aspects that could relate sanitary conditions to schistosomiasis. Reformulation of the SISPCE is key for schistosomiasis control measures, given the new

  18. Project of an information integrated system to provide support to the regulatory control of the radioactive waste inventory; Projeto de um sistema integrado de informacao para suporte ao controle regulatorio do inventario de rejeitos radioativos

    Energy Technology Data Exchange (ETDEWEB)

    Christovao, Marilia Tavares

    2005-05-15

    Sources and radioactive waste deriving from industry activities, medical practice and other areas are collected, received, and stored as waste on Brazilian Nuclear Energy Commission (CNEN) Institutes, that also generate, treat and store their own radioactive waste. The object of this project is to present an Integrated Information System named SICORR, having as guidelines, the referred processes to the radioactive waste regulatory control, under the responsibility of the Radioactive Waste Division (DIREJ), the General Coordination of Licensing and Control (CGLC), the Directorate of Safety and Radiation Protection (DRS) and the CNEN. The main objective of the work was reached, once the project SICORR modeling considers the radioactive waste control inventory, enclosing the treatment and integration of the radioactive waste and the radionuclides data and processes; the installations that produce, use, transport or store radiation sources data; and, CNEN Institutes responsible for the radioactive waste management data. The SICORR functions or essential modules involve the data treatment, integration, standardization and consistency between the processes. The SICORR specification and the analysis results are registered in documents, Software Specification Proposal (PESw) and Software Requirements Specification (ERSw), and are presented in text, in diagrams and user interfaces. Use cases have been used in the SICORR context diagram. The user interfaces for each use case have been detailed, defining the graphical layout, the relationships description with other interfaces, the interface details properties and the commands and the product entrances and exits. For objects radioactive waste and radionuclides, states diagrams have been drawn. The activities diagram represents the business model process. The class diagram represents the static objects and relationships that exist between them, under the specification point of view. The class diagram have been determined

  19. Modelización de un sistema para control automático de temperatura y humedad relativa

    OpenAIRE

    Mantz, Ricardo J.; Tacconi, Eugenio J.

    1987-01-01

    En el presente trabajo se plantea un modelo matemático para un sistema de temperatura y humedad relativa en vista a investigar técnicas autoajustables para su control. Se plantean también una serie de consideraciones para la estimación de los parámetros del sistema a lazo cerrado.

  20. Utilização do inversos de freqüência em sistemas de irrigação para controle de vazão Utilization of a variable frequency drive in irrigation systems to control discharge

    Directory of Open Access Journals (Sweden)

    Jacinto de Assunção Carvalho

    2000-04-01

    Full Text Available Objetivou-se, com este trabalho, avaliar o uso de um inversor de freqüência de 25 cv na irrigação, considerando-se diferentes demandas de água como manejo. A avaliação consistiu de uma análise de custos e benefícios, ambos anuais. O custo foi calculado com base no fator de recuperação do capital, para taxas de juros de 6 e 12% e períodos de amortização de 5 e 15 anos. O benefício consistiu da economia de energia proporcionada pelo inversor de freqüência em relação aos procedimentos usuais de controle da vazão. Relacionaram-se os parâmetros econômicos e de manejo da irrigação, com o objetivo de se avaliar o equipamento para qualquer situação de projeto. Como exemplo de aplicação, analisaram-se duas situações de controle de vazão comparadas ao inversor de freqüência em um projeto de irrigação. Foram determinadas, com auxílio do inversor de freqüência, as características hidráulicas, em função da vazão de uma motobomba de 25 cv sob várias rotações. Observou-se que o inversor de freqüência pode ser viável, devendo-se avaliar a redução de potência advinda do seu uso e o tempo de funcionamento da irrigação, analisando-se a melhor forma de amortização.This work aimed to evaluate the use of a variable frequency drive of 25 HP in irrigation systems to manage different water demands. The evaluation was done analyzing annual costs and benefits. The cost was calculated using interest rates of 6 and 12% and capital return periods of 5 and 15 years. The benefit was the energy saving by use of the variable frequency drive in relation to usual procedures to control discharge. The economic and irrigation management parameters were compared in order to evaluate several design situations. As an example, two situations of discharge control were compared with the use of a variable frequency drive in an irrigation project, suggesting forms for evaluation of the equipment under irrigated conditions. With the help

  1. MÓDULO CONDUCTUAL INMERSO EN UNA ARQUITECTURA DE CONTROL PARA SISTEMAS MULTI-ROBOTS

    Directory of Open Access Journals (Sweden)

    Ángel Eduardo Gil Pérez

    2016-03-01

    Full Text Available El presente trabajo describe el diseño de un módulo conductual para robots de propósito general, implementado en el marco de una arquitectura de control para sistemas multi-robots.El mismo está estructurado en cuatro capas: reactiva, cognitiva, social, y una capa transversal que gestiona un conjunto de emociones básicas, que afectan de forma directael comportamiento del robot y su disposición hacia la ejecución de las tareas y hacia la interrelación con los otros individuos del sistema (es decir, a las otras capas. El objetivo de la arquitectura es brindar una plataforma que facilite los procesos de auto-organización y emergencia del sistema.Se propone un modelo emocional, que toma en consideración cuatro emociones básicas y un estado neutro; esto con el fin de dotar a los robots de un factor adicional que influya en su funcionamiento, que puede ser determinante cuando estos enfrentan situaciones donde la incertidumbre se hace presente. De esta forma, se busca mejorar su proceso de toma de decisión y su adaptación a las dinámicas presentes en el entorno, en particular analizando la influencia de las emociones en sistemas de este tipo.

  2. Glandular dose and image quality control in mammography facilities with computerized radiography systems; Dose glandular e controle de qualidade da imagem em servicos de mamografia com sistema de radiografia computadorizada

    Energy Technology Data Exchange (ETDEWEB)

    Dantas, Marcelino Vicente de Almeida

    2010-07-01

    Breast cancer is the most common cancer among women, and early detection is critical to its diagnosis and treatment. To date, the most effective method for early detection of breast cancer has been x-ray mammography for which the screen/film (SF) technique has been the gold standard. However, even though SF combinations have been improved and optimized over the years for breast imaging, there are some critical limitations, including a narrow exposure range, image artifacts, film processing problems, and inflexibility in image processing and film management. In recent years, digital mammography has been introduced in cancer screening programmes with the screen/film techniques gradually being phased out. Computed radiography (CR), also commonly known as photostimulable phosphor (PSP) imaging or storage phosphor, employs reusable imaging plates and associated hardware and software to acquire and to display digital projection radiographs. In this work, a protocol model was tested for performing image quality control and average glandular dose (AGD) evaluation in 19 institutions with computed radiography systems for mammography. The protocol was validated through tests at the Laboratorio de Radioprotecao Aplicada a Mamografia (LARAM) from the Centro de Desenvolvimento da Tecnologia Nuclear (CDTN). The image quality visual evaluation of CDMAM phantom showed that 53% of the facilities were able to produce images of excellent quality. Furthermore, the automated evaluation of image quality, using the analyze software cdcom.exe, showed that 57% of the images were considered to be of good quality. The detector linearity test showed that the CR response is very linear, where 95% of facilities evaluated were considered to be compliant. For the image noise was found that only 20% of facilities are in agreement with the parameters established for this test. The average glandular doses, which patients may be getting to perform an examination, were below the action levels

  3. Modal analysis of electromechanical oscillations in electrical power systems; Analisis modal de oscilaciones electromecanicas en sistemas electricos de potencia

    Energy Technology Data Exchange (ETDEWEB)

    Calderon-Guizar, J.G [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)]. E-mail: jgcg@iie.org.mx

    2008-10-15

    The presence of electromechanical oscillations in any electrical power system is a typical characteristic of this kind of systems. Provided the damping associated with these oscillations lies above of a minimum specified value, the occurrence of these oscillations is not considered as a threat to the system operation. This paper focuses the attention on the application of modal analysis for assessing the dynamical behavior of a power system subjected to small disturbances for different operating conditions and transmission system topologies, as well. The reported results indicate, that modal analysis enables a straight identification of the causes that contribute negatively to the damping of the electromechanical modes. [Spanish] La presencia de oscilaciones electromecanicas en cualquier Sistema Electrico de Potencia (SEP) es una caracteristica propia de estos sistemas. Mientras el amortiguamiento asociado con este tipo de oscilaciones se encuentre dentro de los limites considerados como aceptables para la operacion continua de este tipo de sistemas, el surgimiento de estas no se considera una amenaza para la operacion segura del SEP. El presente articulo, centra su atencion en la aplicacion del analisis modal para evaluar el comportamiento dinamico de un SEP ante la ocurrencia de disturbios de magnitud pequena para diferentes topologias y condiciones de operacion. Los resultados reportados indican, que la aplicacion del analisis modal permite la identificacion directa de las causas que contribuyen en forma negativa al amortiguamiento asociado con los modos electromecanicos, asi como la ubicacion mas adecuada de controles que contribuyan a mejorar el amortiguamiento de los mismos.

  4. CONTROL ROBUSTO DE UN SISTEMA MECÁNICO SIMPLE MEDIANTE UNA HERRAMIENTA GRAFICA

    Directory of Open Access Journals (Sweden)

    LUINI HURTADO CORTÉS

    2010-01-01

    Full Text Available en este artículo se presenta el diseño de un controlador robusto para un sistema masaresorteamortiguador . Con el fin de realizar un diseño simple, se tomó en cuenta únicamente la incertidumbre en los parámetros de la planta. Los cálculos del problema se realizaron con una interfaz gráfica desarrollada para el diseño de controladores robustos, disponible para la Toolbox de Control Robusto de Matlab Ò . Se pretende que este ejercicio sirva como tutorial de introducción al análisis y diseño de sistemas de control robusto mediante el uso de la interfaz gráfica.

  5. Programación de un sistema de adquisición de datos utilizando el sistema embebido DNP/1110; Programming of a data acquisition system using the embedded system dil/netpc DNP/1110

    Directory of Open Access Journals (Sweden)

    Josnier Ramos Guardarrama

    2011-06-01

    Full Text Available En el trabajo se presenta una alternativa económica de un sistema de adquisición de datos (SAD basado en el kit dedesarrollo DIL/NetPC DNP/1110, el cual esta formado por un microcontrolador de INTEL SA-1110 StrongARM quetrabaja a 206 MHz y que tiene incorporado un controlador de Ethernet que permite desarrollar aplicaciones con el usode la red. El sistema embebido dispone de un sistema operativo Linux, kernel versión 2.4.18. Como parte del diseñose incorporan de forma compacta los elementos necesarios para que el SAD sea capaz de muestrear ocho señalescapturadas simultáneamente. De particular interés resulta la programación, presentándose dos variantes de solución:cuando se ejecuta la aplicación con un software que corre en el área de usuario y cuando el control se logra con unmódulo del sistema operativo específico para el trabajo del SAD. El sistema está soportado por la integración desoftware libre y propietario.  This work focuses on an economic alternative for developing a data acquisition system (DAS which is made up forThe DIL/NetPC DNP/1110, which provides a very compact Intel 206 MHz SA-1110 StrongARM-based low powerembedded controller with TCP/IP stack and web server for high-speed embedded networking applications. Theembedded system has an operating system Linux, kernel version 2.4.18. The built data acquisition system has thenecessary elements to take charge of governing the sampling process of eight signals. Of particular interest it is theprogramming, being presented two solution variants: when the application is executed with software that it runs inuser's area and when the control is achieved with a specific build module of the operating system for the work of theDAS.. The system is supported by the integration of free software and property software.

  6. Programación de un sistema de adquisición de datos utilizando el sistema embebido DNP/1110;Programming of a data acquisition system using the embedded system dil/netpc DNP/1110

    Directory of Open Access Journals (Sweden)

    Josnier Ramos - Guardarrama,et al.

    2011-06-01

    Full Text Available En el trabajo se presenta una alternativa económica de un sistema de adquisición de datos (SAD basado en el kit de desarrollo DIL/NetPC DNP/1110, el cual esta formado por un microcontrolador de INTEL SA-1110 StrongARM que trabaja a 206 MHz y que tiene incorporado un controlador de Ethernet que permite desarrollar aplicaciones con el uso de la red. El sistema embebido dispone de un sistema operativo Linux, kernel versión 2.4.18. Como parte del diseño se incorporan de forma compacta los elementos necesarios para que el SAD sea capaz de muestrear ocho señales capturadas simultáneamente. De particular interés resulta la programación, presentándose dos variantes de solución: cuando se ejecuta la aplicación con un software que corre en el área de usuario y cuando el control se logra con un módulo del sistema operativo específico para el trabajo del SAD. El sistema está soportado por la integración de software libre y propietario.This work focuses on an economic alternative for developing a data acquisition system (DAS which is made up for The DIL/NetPC DNP/1110, which provides a very compact Intel 206 MHz SA-1110 StrongARM-based low power embedded controller with TCP/IP stack and web server for high-speed embedded networking applications. The embedded system has an operating system Linux, kernel version 2.4.18. The built data acquisition system has the necessary elements to take charge of governing the sampling process of eight signals. Of particular interest it is the programming, being presented two solution variants: when the application is executed with software that it runs in user's area and when the control is achieved with a specific build module of the operating system for the work of the DAS.. The system is supported by the integration of free software and property software.

  7. Sistemas farmacêuticos gastrorretentivos flutuantes Pharmaceutical gastro-retentive systems

    Directory of Open Access Journals (Sweden)

    Pedro Miguel da Costa Barrocas

    2007-09-01

    Full Text Available Freqüentemente recorre-se à produção de sistemas gastrorretentivos para modular a liberação de fármacos a partir de sistemas farmacêuticos com vistas ao aumento do tempo de permanência do fármaco no trato gastrointestinal. Umas das estratégias mais interessantes passa pela produção de sistemas flutuantes. Estes podem ser classificados em dois grupos: sistemas flutuantes efervescentes e sistemas flutuantes não-efervecentes. Neste artigo apresenta-se uma revisão bibliográfica do que tem sido produzido nesta área nos últimos anos.Gastro-retentive systems are often produced in order to modulate drugs release from pharmaceutical forms and in this way to increase drug residence time in the gastrointestinal tract. One of the most interesting strategies consists in the preparation of floating devices. These can be classified into two groups: effervescent systems and non-effervescent systems. A review of what has been done in the last years is presented in this article.

  8. DESENVOLVIMENTO DE UM PROGRAMA ABERTO DE ENSINO DE SISTEMAS DE CONTROLE

    Directory of Open Access Journals (Sweden)

    Ricardo Andrade Cava

    2010-01-01

    Full Text Available Este artigo apresenta os resultados produzidos no desenvolvimento de um Programa Aberto de Ensino de Sistemas de Controle (PAESC a ser utilizado como ferramenta auxiliar nas atividades de ensino da disciplina de Sistemas de Controle. Essa disciplina é parte integrante de vários currículos em cursos de engenharia e possui uma característica multidisciplinar, envolvendo, dentre outros, conteúdos de Cálculo, Física, Circuitos Elétricos, Mecanismos, dificultando o aprendizado dos alunos. Com o objetivo primordial de suprir essa dificuldade, o Programa Aberto de Ensino de Sistemas de Controle está sendo desenvolvido no sentido de proporcionar uma ferramenta tecnológica, disponível pela Web, para auxiliar o aprendizado dos futuros engenheiros. Para tanto, apresenta gráficos, animações e permite a interação. A ferramenta está sendo construída em linguagem Java, e os códigos produzidos são abertos, de modo a permitir que possam ser enviadas contribuições às simulações desenvolvidas.

  9. Sistemas de Control en el Transporte de productos Perecederos

    OpenAIRE

    Ruiz García, Luis; Barreiro Elorza, Pilar; Ruiz-Altisent, Margarita

    2009-01-01

    Los productos alimentarios perecederos tales como hortalizas, frutas, carne o pescado requieren transporte refrigerado. El control de la calidad y supervisión de los productos durante su transporte y distribución es de gran importancia, siendo el mayor reto asegurar una cadena de frio continua desde el productor hasta el consumidor. Entre las diferentes tecnologías que se pueden utilizar para monitorizar, destacan las tecnologías de sensórica inalámbrica que pueden ser de dos tipos: RFID...

  10. Strategic management of pastures to control helminths and coccidia of calves in organic systemAvaliação da carga parasitária de helmintos e protozoários em bezerros manejados em sistema orgânico

    Directory of Open Access Journals (Sweden)

    Adivaldo Henrique da Fonseca

    2012-06-01

    Full Text Available The objective of this study was to evaluate the influence of helminths eggs and protozoan oocysts elimination in calves’ feces kept in organic system production. The study was conducted from January 2008 to December 2009. Coproparasitological examinations were carried biweekly of 18 calves in pastures rotating system on Embrapa Agrobiology.The egg counting average data had been submitted to the Kruskal Willis test and the larvae counting percentile values to the qui-square test. The average counting of eggs per gram of faces (EGF varied of 250 the 800, characterizing low and moderate infection. Animals with inferior age the six months had presented superior results of EGF (P O objetivo do presente trabalho foi avaliar a influência da eliminação de ovos de helmintos e protozoários nas fezes de bezerros mantidos em sistema orgânico de produção. De janeiro de 2008 a dezembro de 2009, foram realizados quinzenalmente exames coproparasitológicos de 18 bezerros manejados em sistema rotativo de pastagens na Embrapa Agrobiologia. Os dados médios de contagem de ovos foram submetidos ao teste de Kruskal Willis e os valores percentuais da contagem de larvas ao teste de qui-quadrado. A contagem média de ovos por grama de fezes (OPG variou de 250 a 800, caracterizando infecção leve a moderada. Animais com idade inferior a seis meses apresentaram OPG significativamente superiores (p<0,005 aos de faixa etária entre seis e doze meses. Os maiores graus de infecção foram observados no final da primavera e verão. Nos exames coprológicos foram identificados os seguintes gêneros: Haemonchus (73%, Trichostrongylus (24% e Oesophagostomum (3%. As práticas de manejo adotadas em sistema orgânico de produção foram capazes de manter os animais em níveis moderados de infecção por helmintos e protozoários, indicando que há controle parasitário pelo uso do sistema rotativo de pastos.

  11. Application and validation of a warning system for grapevine downy mildew controlusing fungicides Aplicação e validação de um sistema de aviso para o controle do míldio da videira, com fungicidas

    Directory of Open Access Journals (Sweden)

    Erlei Melo Reis

    2013-03-01

    Full Text Available Most warning systems for plant disease control are based on Vinho, in Bento Gonçalves - RS, during the growing seasons 2000/ weather models dependent on the relationships between leaf wetness 01, 2002/03 and 2003/2004, using the grape cultivar Isabel. The duration and mean air temperature in this period considering the conventional system used by local growers was compared with the target disease intensity. For the development of a warning system to new warning system by using different cumulative daily disease severity control grapevine downy mildew, the equation generated by Lalancette values (CDDSV as the criterion to schedule fungicide application and et al. (7 was used. This equation was employed to elaborate a critical reapplication. In experiments conducted in 2003/04, CDDSV of 12 - period table and program a computerized device, which records, though 14 showed promising to schedule the first spraying and the interval electronic sensors, leaf wetness duration, mean temperature in this between fungicide applications, reducing by 37.5% the number of period and automatically calculates the daily value of probability of applications and maintaining the same control efficiency in leaves infection occurrence. The system was validated at Embrapa Uva e and bunches, similarly to the conventional system.A maioria dos sistemas de aviso para o controle de doenças de O sistema foi validado na Embrapa Uva e Vinho, em Bento Gonçalves plantas utilizam como fundamento o modelo climático baseado - RS, conduzido nas safras agrícolas de 2000/01, 2002/03 e 2003/ nas interações entre a duração do molhamento foliar e a 2004 utilizando-se o cultivar Isabel. O sistema convencional utilizado temperatura média nesse período sobre a intensidade da doença pelos produtores foi comparado com o modelo de aviso utilizando alvo. No desenvolvimento de um modelo de aviso para o controle como critério indicador do momento para a aplicação e reaplicação do m

  12. Estudio de un sistema RFID para el control de inventarios y seguridad de libros en bibliotecas

    Directory of Open Access Journals (Sweden)

    Marlón Altamirano

    2016-11-01

    Full Text Available El estudio del sistema Identificación por radiofrecuencia (RFID en bibliotecas da a conocer los aspectos técnicos y el funcionamiento de la tecnología, para lo cual se analizó y realizó los estudios necesarios para determinar la factibilidad  de este sistema en los establecimientos bibliotecarios, con esto facilitar la gestión bibliotecaria, además de evitar la constante pérdida de los textos. Se detalla los principales usos, ventajas y desventajas que se tiene en este sistema, además de mostrar las características técnicas que deben de tener los equipos RFID. Abstract   The study system Radio Frequency Identification (RFID in libraries disclosed the technical aspects and operation of the technology, which was analyzed and conducted the necessary studies to determine the feasibility of this system in library facilities, with this easy library management , and avoid the constant loss of texts. the main uses , advantages and disadvantages have in this system , besides the technical features that must have detailed the RFID equipment .

  13. Procedure for making mannequins tailor for image quality control of PET by 3D printing systems; Procedimiento para la fabricacion de maniquies a medida, para control de calidad de imagen PET, mediante sistemas de impresion 3D

    Energy Technology Data Exchange (ETDEWEB)

    Collado Chamorro, P. M.; Saez Beltran, F.; Diaz Pascual, V.; Benito Bejarado, M. A.; Sanz Freire, C. J.; Lopo Casqueiro, N.; Gonzalez Fernandez, M. P.; Lopez de Gamarra, M. S.

    2015-07-01

    There is a software free both for be the processes of modeling of the objects 3D to split of medical images, as for convert said modeling to file ready for be read and executed by the 3D printers (sequence or slicer). This lets make mannequins of Control of quality with a investment minimum. In this work is built a mannequin of brain refillable to measurement for be used in studies PET. (Author)

  14. Checks for quality control of wedge dynamics in treatment units and the planning system; Verificaciones para control de calidad de la cuna dinamica en las unidades de tratamiento y el sistema de planificacion

    Energy Technology Data Exchange (ETDEWEB)

    Mateos Salvador, P.; Rodriguez Lopez, B.; Font Gelabert, J.; Hernandez Rodriguez, J.; Arino Gil, A.

    2013-07-01

    The objective of this study is to verify the implementation of enhanced dynamic wedge (EDW) vary in the Eclipse planning system and the experimental determination of the parameters that define the dosimetry characteristics of enhanced dynamic wedge of our treatment units. (Author)

  15. Improving tuberculosis control through the partnership between university and the health system Qualificar o controle da tuberculose mediante a parceria entre a Universidade e o Sistema de Saúde

    Directory of Open Access Journals (Sweden)

    Mariana Soares Valença

    2012-08-01

    Full Text Available INTRODUCTION: Tuberculosis (TB control is linked to the availability of qualified methods for microbiological diagnostics; however, microscopy with limited sensitivity is the only method available in many locations. The objective of this study was to evaluate the introduction of culture, drug susceptibility testing (DST, and genotyping in the routine of a Municipal Program of Tuberculosis Control. METHODS: Direct microscopy of sputum and culture in Ogawa-Kudoh were performed on 1,636 samples from 787 patients. DST of positive cultures was performed by resazurin microtiter assay and genotyping by mycobacterial interspersed repetitive units-variable number tandem repeat. RESULTS: A total 91 patients with TB were identified. The culture increased case detection by 32% compared with the microscopy; acquired resistance was 3.3% and the genotyping showed high genetic diversity. CONCLUSIONS: Ogawa-Kudoh contributed significantly to the increase in case detection and is suitable for implementation in poor-resource locations. The acquired resistance rate was lower than that reported in a recent Brazilian survey. The high genetic diversity is possibly related to the high TB prevalence in the population, as well as to early detection and suitable treatment of patients. The interaction between research and health care is important for reorienting the practice, transferring technology, and improving TB control.INTRODUÇÃO: O controle da tuberculose (TB está relacionado com a disponibilidade de métodos de diagnóstico microbiológico qualificados, no entanto a microscopia com a sua limitada sensibilidade é o único método disponível em muitos locais.O objetivo deste estudo foi avaliar a introdução da cultura, teste de sensibilidade aos antimicrobianos (TSA e genotipagem na rotina de um Programa Municipal de Controle da Tuberculose. MÉTODOS:A baciloscopia direta do escarro e cultura em Ogawa-Kudoh foram realizadas em 1.636 amostras de 787 pacientes. O

  16. Development of multichannel system for nuclear radiation spectrometry based on an embedded control and acquisition device Myrio-1900; Desarrollo de sistema multicanal para espectrometria de radiacion nuclear basado en un dispositivo embebido de control y adquisicion MyRIO-1900

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez D, S.

    2016-07-01

    This work describes the design a multichannel analyzer system 4096 channels (Mca) for gamma radiation spectrometry. The multichannel analyzer has as its main component an embedded company National Instruments model NI (Myrio-1900) module, which is integrated by a step of converting analog to digital signals (A / D) and digital-to-analog (D / A) a programmable gate array, and a processor real time (Rt). Through this module the pulses generated by the detector to be processed and subsequently forming the multichannel analyzer are acquired. In addition, a graphical user interface designed to make more use friendly system from a personal computer (Pc), embedded programming module and the user interface was done with the LabVIEW programming environment. tests with different sources of radiation ({sup 60}Co, {sup 226}Ra, {sup 137}Cs) and semiconductor detectors (Ge) and scintillation (Na) were made. Getting results satisfactory. (Author)

  17. Study of fieldbus technology applied in a sterilization plant control and safety systems; Estudo de aplicacao de tecnologia 'fieldbus' nos sistemas de controle e seguranca de uma planta de radioesterilizacao

    Energy Technology Data Exchange (ETDEWEB)

    Karam Junior, Dib

    2000-07-01

    Several sterilization processes have been used in these years for treatment of countless products. Some processes use high temperatures, thermal shocks and chemical agents. With the discovery of the ionizing radiation and its posterior technological developments turned possible application of that process, in 1960, also in the the sterilization, denominated radiation sterilization. This process became also applied in another areas of health and industrial as food conservation, gemstones enhancement and others. The radiation sterilization requests an effective control and it needs a high level of safety. The commercial use of the computers applied in industrial automation provides and the domain of new technologies in this field provides new applications then new designs now is possible. The Fieldbus technology, a new digital communication protocol, like a Local Area Network, can be an alternative in the cobalt-60 irradiation plant. The present work suggests, evaluates, qualifies and quantifies this possibility. (author)

  18. Sistema heterárquico de control basado en agentes para sistemas de fabricación: la nueva metodología proha

    Directory of Open Access Journals (Sweden)

    Andrés García Higuera

    2007-01-01

    Full Text Available Resumen: Los nuevos métodos de control altamente distribuido para sistemas complejos han generado una serie de nuevas filosofías entre las que destacan las que utilizan tipos distintos de agentes para diferentes niveles conceptuales y de gestión (MAS. Pero estas arquitecturas basadas en la negociación entre sistemas independientes tienen el inconveniente de una excesiva dependencia en la calidad de la información. Si algún agente dispone de más información, la negociación estará viciada. Actualmente han aparecido nuevas tecnologías capaces de resolver este problema, un ejemplo de esto lo constituye la tecnología Auto-ID/EPC. Esta tecnología está siendo rápidamente adoptada por la industria para aplicaciones en logística; pero una vez que estos sistemas se encuentran disponibles en una instalación, el control de la fabricación puede beneficiarse tan profundamente de ellos que los MAS están llamados a convertirse en soluciones factibles capaces de aumentar la flexibilidad y la capacidad de los entornos productivos. Este artículo presenta una metodología para el control negociado en sistemas altamente distribuidos, que utiliza tecnología RFID para garantizar una adecuada disponibilidad de la información. Palabras clave: Fabricación, Control Distribuido, Agentes, RFID-IMS

  19. Comercialización del sistema control de errores y versiones de software

    OpenAIRE

    Vargas Caicedo, Hilda Elisa; Rodriguez Loor, Carol Vanessa; Gaibor, Gustavo

    2009-01-01

    El principal objetivo es proveer soluciones en el ámbito de tecnología de información a las necesidades de las empresas para lograr una eficiente administración de los procesos, apoyados en la innovación y optimización continua. Nuestra propuesta, será enfocada a ofrecer un sistema que combina las funciones de control de errores, helpdesk y control de versiones de software a un buen precio. Se indicarán aspectos como las estrategias de venta, de promoción, ingresos y egresos. Aparte de l...

  20. Um sistema de controle estatístico de qualidade em chapas de madeira aglomerada

    OpenAIRE

    Imbiriba, Pedro Paulo de Lalor

    2012-01-01

    Resumo: Este trabalho adaptou um sistema de controle estatístico de qualidade, como modelo, em uma fábrica nacional de chapas de madeira aglomerada, objetivando: 1. Calcular as tolerâncias de controle de qualidade determinadas pelas variabilidades do processo; 2. Compará-las com as que estão em uso; 3. Determinar o nível de qualidade das chapas. Com este propósito, durante o ano de 1976, foram coletadas amostras de chapas tipo standard, de 15 mm de espessura das três linhas de produção. Inici...

  1. Modelo de control y vigilancia en sanidad ambiental basados en sistemas de autocontrol

    OpenAIRE

    Loreto Santa Marina Rodríguez; Elena Serrano Ibarbia

    2006-01-01

    En el ámbito ambiental el control de los riesgos para la salud está experimentando cambios importantes en lo referente a su concepción y a la forma de gestión de los mismos desde lo servicios de salud pública. Tradicionalmente la Administración Sanitaria ha asumido el papel de garante de las condiciones higiénico-sanitarias de las instalaciones, estableciendo sistemas de control y vigilancia. La tendencia actual es que sean los responsables directos de las instalaciones los que valoren los ri...

  2. Sistema automatizado para el control de las inversiones en las redes eléctricas.

    Directory of Open Access Journals (Sweden)

    Maylín Díaz Pardillo

    2015-03-01

    Full Text Available El presente trabajo investigativo abarca las etapas de la automatización del proceso de control en la ejecución de las inversiones que se realizan en las redes del Sistema Electroenergético Nacional, integrado al Sistema Integral de Gestión de Redes de la Unión Eléctrica. Para el desarrollo de la aplicación se llevaron a cabo las etapas del proceso de desarrollo de software, según lo especifica el Proceso Unificado de Desarrollo (RUP, utilizándose como herramienta de modelado para el análisis y diseño: el Enterprise Architect. El software se implementó en Embarcadero RAD Studio 2010 el cual incluye facilidades de desarrollo para aplicaciones Desktop con un diseño de interfaz adecuado a los requerimientos del cliente, se utilizó Object Pascal como lenguaje de programación lo que permitió un código eficiente y para la persistencia de la información se utilizó como Sistema Gestor de Base de Datos: Microsoft SQL Server 2008 R2.

  3. Sistema de control de acceso e interbloqueo para el Centro de Inmunología Molecular

    Directory of Open Access Journals (Sweden)

    Marcel Pedreira Marcel

    2013-10-01

    Full Text Available En el presente trabajo se muestra el diseño y desarrollo de un sistema de control de acceso e interbloqueo en el Centro de Inmunología Molecular debido a que los sistemas comerciales de este tipo instalados en dicho centro no cumplen todas las necesidades. El sistema propuesto consta de dos tarjetas electrónicas: el controlador de puertas y el controlador de interbloqueo, ambas fueron desarrolladas a base de microcontrolador PIC de Microchip programados usando el compilador PCW de CCS. Estas tarjetas son capaces de comunicarse con dispositivos de lectura de código de barras, proximidad, biométricos o cualquier otro que transmita por protocolo Wiegand. Además deben ser configuradas para que operen de manera deseada, para ello fue desarrollada una aplicación software de parametrización utilizando Qt como framework, e implementando prácticas eficientes de ingeniería de software. Esta aplicación se comunica con los controladores vía RS232 con protocolo Modbus.

  4. Development of a dosimetric system for dental X-ray equipment quality control; Desenvolvimento de um sistema dosimetrico para controle de qualidade de equipamentos de raios-X odontologicos

    Energy Technology Data Exchange (ETDEWEB)

    Melo, Francisco Almeida de

    2002-08-01

    An electronic instrument with digital readout was designed and constructed to provide fast, simple and non-invasive measurements of X-ray dental equipment parameters. This instrument is capable of evaluating the entrance dose, exposure time, tube voltage (kVp) and beam filtration. It consists of a set of five photodiodes connected each one in the photocurrent mode to the input of a designed integrating electrometer. Three of the detectors are fixed under aluminium filters with different thicknesses, one is fixed under a 0.3 mm copper filter and the other has no filtration. The readings of the three detectors under aluminium filters and of the bare detector permit the determination of the half-value layer, which is used to calculate the beam filtration. The ratio between the readings of the detector below the copper filter and the one without filtration is used to determine the tube voltage. The signal produced by the detector without filter is used to evaluate the patient entrance dose, and to active an electronic timer for measuring the real exposure time. The tests and calibration of the instrument in different voltages in the 59 - 70kVp range, showed that its response is both stable and reproducible to within 1%. The instrument response was compared to the one from a commercial non-invasive X-ray test equipment (Gammex RMI Multifunction kVp meter). The results showed that the response of the developed instrument is in good agreement with the RMI meter which is the standard equipment for such measurements. These results indicate that the dosimetric system is suitable for use in Dental Quality Assurance Programs. (author)

  5. Electric power conservation while using pumping systems; Conservacion de Energia Electrica en Sistemas de Bombeo

    Energy Technology Data Exchange (ETDEWEB)

    Nambiar, P

    2007-01-15

    The pumping systems provide about 20 to 25 percent of energy which is necessary worldwide: it is fruitful to understand how to use electric power efficiently, to achieve the reduction regarding expenses a pumping system implies.It is essential to possess a better knowledge about the pumping system and its applications, in order to be able to use energy responsibly. If people do not how to operate this kind of systems properly, they will use inadequate equipment that will cause an energy waste. In addition it is important to know: alternative methods to meet variable demands, an adapted system to pump water requirements in order to ensure the pump work in its pumping point, and the life cycle system cost for the energy saving in the long term. [Spanish] En promedio del 20 al 25% de la energia necesaria en el mundo proviene de los sistemas de bombeo, por tal razon es importante saber como utilizar la energia electrica con eficiencia para asi lograr reducir los gastos que este tipo de sistemas implican. Para poder hacer un buen uso de la energia, es necesario que se tenga un conocimiento mayor del sistema de bombeo y aplicacion, ya que la ignorancia sobre esto exige el uso de aparatos que contribuyen al desperdicio de la energia; por otro lado tambien es esencial conocer metodos alternos para demandas variables, tener un sistema que se adapte a las necesidades de bombeo del agua para asegurarse de que cada bomba trabaje cerca de su punto de bombeo y finalmente conocer el costo del ciclo de vida del sistema para el ahorro de energia a largo plazo.

  6. USO DE LABVIEW PARA SISTEMAS DE CONTROL EN INGENIERÍA QUÍMICA

    Directory of Open Access Journals (Sweden)

    MARÍA PAULA GÓMEZ QUINTERO

    2011-01-01

    Full Text Available Se implementó un sistema de control para una planta multipropósito el cual consta de control de nivel, control de temperatura y control de presión. Se desarrolló una interfaz en LabView 9.1 para una mejor visualización de la operación y se comprobó la correcta interacción de la interfaz con la planta, consiguiendo llegar a los valores del set-point con un margen de error de hasta un 5%. Además, se realizó una simulación en Simulink de MATLAB para el lazo de control de temperatura encontrando una alta concordancia entre los datos experimentales y la simulación.

  7. The TCSC (Thyristor Controlled Series Compensator) in a multi machine electric power system: the effects on the synchronizing power; O TCSC em um sistema de energia eletrica multimaquinas: os efeitos sobre a potencia sincronizante

    Energy Technology Data Exchange (ETDEWEB)

    Silva, J.C.; Colvara, L.D. [Universidade Estadual Paulista (FEIS/UNESP), Ilha Solteira, SP (Brazil). Dept. de Engenharia Eletrica], Emails: jadiel_silva@hotmail.com, laurence@dee.feis.unesp.br

    2009-07-01

    The problem of stability of electric power systems, from the standpoint of ability to sync and how FACTS (Flexible Alternating Current Transmission Systems) devices affect this ability in particular the TSCS (Thyristor Controlled Series Compensator) inserted into an environment multi machine, is addressed. The effects of this device on the power synchronizing are considered through analysis of the matrix admittance of the bar, focusing on the transfer admittances between machines.

  8. Citrus orchard planted with no tillage and conventional systemsHuerto de cítricos plantado con sistema de cero labranza y sistema convencional

    Directory of Open Access Journals (Sweden)

    Carmen Silvia Vieira Janeiro Neves

    2010-02-01

    Full Text Available No tillage system has brought many advantages to soil protection, without reducing the yield of annual crops. This system has been adapted for Citrus orchards, with the plantation of trees in furrows opened in areas previously occupied by pastures. This work had as objective to evaluate tree development, root system, yield, and soil characteristics in an orchard planted in two systems. The study was made in Parana State, Brazil, in a medium texture oxisol with ‘Valência’ orange (Citrus sinensis L. trees with Rangpur lime rootstock (Citrus limonia Osbeck. The treatments were no tillage (furrowing and plantation and conventional plantation (hole area plowing and disk harrowing before furrowing and plantation. The yield was 86 - 129 kg of fruits per plant, without significant difference between treatments. The plantation systems either do not affect the development of the plants, the amount of roots and the fruit quality. In the conventional plantation system the soil has greater resistance to penetration in inter rows than in the zero tillage system plantation.El sistema de cero labranza ha traído muchas ventajas en la protección del suelo, sin perjudicar el rendimiento de los cultivos anuales. Este sistema ha sido adaptado para los huertos citrícolas, realizándose la plantación en surcos abiertos en terrenos anteriormente ocupados por pastizales. El trabajo tuvo como objetivo evaluar el desarrollo de las plantas y del sistema radicular, producción, características del suelo en un huerto plantado en dos sistemas de labranza. El estudio fue realizado en el Noroeste de Paraná, en un oxisol con textura media, en plantas de naranja ‘Valência’ con patrón de lima Rangpur. Los tratamientos evaluados fueron: cero labranza (apertura de surcos y plantación y plantación convencional (arado de discos y grada, seguido de apertura de surcos y plantación. La producción fue de 86 a 129 kg de frutos por planta, sin diferencia significativa

  9. Uso de sistemas de control de versiones en el seguimiento continuo del trabajo del alumno

    OpenAIRE

    Riesco Albizu, Miguel; Díaz Fondón, M. Ángeles

    2010-01-01

    El seguimiento continuo del trabajo del alumno suele ser complicado cuando se trata prácticas de desarrollo de software. Además de ser tedioso y de difícil realización, puede ser una tarea considerablemente larga cuando el número de alumnos es elevado. En este trabajo se propone una combinación de técnicas, basadas en la utilización de un sistema de control de versiones, para hacer posible este seguimiento incluso con un número alto de alumnos. Peer Reviewed...

  10. Creación de un sistema de control de rotores mediante Python

    OpenAIRE

    Góngora García, Samuel

    2014-01-01

    En este proyecto final de carrera abordaremos la creación de un sistema de control de rotores destinados al seguimiento de satélites, en un principio, de órbita baja. La placa de desarrollo utilizada en este proyecto será una Raspberry Pi. Como podremos ir comprobando con la lectura de esta memoria la utilización de elementos de hardware y software libres será un pilar de este proyecto. La continua aparición de hardware para prototipado, y la gran comunidad de desarrolladore...

  11. Control inteligente de sistemas e iluminación en edificios

    OpenAIRE

    Huamán Rojas, Jezzy James

    2017-01-01

    La tesis desarrolla un controlador adaptativo para el control inteligente de la iluminación en cualquier ambiente, esto considera edificios, casas, oficinas, entre otros. Se presentan dos opciones de controlador y, para considerarlo un sistema inteligente, este se adapta al usuario haciendo uso de la tecnología de aprendizaje automático y regulable. Redes neuronales artificiales y árboles de decisión se emplean para adecuar la iluminación sin dejar de cumplir las normas que se establecen por ...

  12. Financiamiento del sistema de salud chileno The Chilean health system financing

    Directory of Open Access Journals (Sweden)

    Marcos Vergara-Iturriaga

    2006-12-01

    Full Text Available OBJETIVO: Explorar el financiamiento del sistema de salud chileno sobre la base de los datos más recientes disponibles. MATERIAL Y MÉTODOS: Se utiliza el marco teórico de los sistemas de salud del informe de salud del mundo del año 2000 de la Organización Mundial de la Salud (OMS para analizar el financiamiento del sistema de salud chileno, con especial énfasis en los esquemas de aseguramiento existentes. RESULTADOS: En el sistema de salud chileno hay una gran proporción de personas cubiertas por los seguros de salud existentes (alrededor de 88%; sin embargo, se presenta una tendencia importante hacia la segmentación de la población, sea por riesgo o por ingreso. Se observan esfuerzos, en especial por parte del Fondo Nacional de Salud (FONASA, orientados a realizar una compra estratégica de servicios de salud. CONCLUSIONES: Existe aún mucho espacio para mejorar el financiamiento del sistema de salud chileno, sobre todo en cuanto a pooling y compra estratégica.OBJECTIVE: To explore the Chilean health system financing based on the most recent available data. MATERIAL AND METHODS: Using the WHO World Health Report 2000 framework, this paper analyzes the Chilean health system financing, with special emphasis on insurance schemes. RESULTS: The analysis shows that a great proportion of people is covered by the existing health insurance schemes (about 88%. However, there is a tendency towards segmentation of the population in terms of risk and income. Additionally, efforts have been made, especially by FONASA (National Health Fund, to perform a strategic purchasing of healthcare. CONCLUSIONS: There still is a need for improving the Chilean health system financing in terms of pooling and strategic purchasing.

  13. The structuring of health systems and the control of infectious disease: looking at Mexico and Cuba La estructuración de los sistemas de salud y el control de las enfermedades infecciosas: un vistazo a México y a Cuba

    Directory of Open Access Journals (Sweden)

    Tim Anderson

    2006-06-01

    Full Text Available En este trabajo se examinan las consecuencias que tienen para el control de las enfermedades infecciosas diferentes maneras de concebir la organización de los sistemas de salud. En particular se examinan las bases teóricas de la organización de los sistemas de salud de México y de Cuba, junto con sus programas y resultados, en conexión con cinco de las principales y más peligrosas enfermedades infecciosas: la tuberculosis, la infección por VIH y el sida, la diarrea, el sarampión y el paludismo. México ha tenido un sistema federal y neoliberal basado en un programa de seguridad social tripartito (el Estado, el empleador, y aportaciones del empleado, en consorcios del sector privado (inversiones en servicios públicos por parte de entidades privadas con fines de lucro y en la provisión competitiva de servicios (servicios competitivos en lugar de coordinados. En cambio, Cuba ha tenido un sistema público con acceso libre garantizado para toda la población, una coordinación pública centralizada, y la inscripción de todos los pacientes sin excepción (todo miembro de la población tiene un registro médico y un médico asignado. ¿Cómo se han lidiado con las enfermedades infecciosas más peligrosas de la humanidad dos sistemas de salud con estas características? La superioridad casi invariable que ha mostrado Cuba en el control de las enfermedades parece depender del acceso garantizado que tiene todo habitante a los servicios de salud, a la coordinación centralizada del sistema sanitario y a una abundancia de trabajadores de salud bien capacitados. Por otro lado, en México la provisión desigual de servicios asistenciales no ha logrado satisfacer las necesidades de todos los mexicanos y la expansión de los servicios privados difícilmente podrá compensar las carencias observadas en las zonas más pobres del país. Las deficiencias de infraestructura y de otros recursos imponen límites sobre lo que Cuba puede alcanzar, pero son

  14. Sistemas de produção de grãos e incidência de plantas daninhas Weed incidence in grain production systems

    Directory of Open Access Journals (Sweden)

    G.S.A Castro

    2011-01-01

    Full Text Available O sistema de semeadura direta e os diferentes sistemas de produção nele adotados podem contribuir para a supressão de plantas infestantes. Em razão disso, o objetivo do presente trabalho foi avaliar o controle de plantas daninhas em função de diferentes sistemas de produção de grãos. Os tratamentos utilizados foram: I. Sistema "safra-pousio" - soja/ pousio/milho/pousio/arroz/pousio/soja; II. Sistema "safra-adubo verde" - soja/milheto/ milho/guandu/arroz/crotalária/soja; III. Sistema "safra-safrinha" - soja/aveia-branca/milho/ feijão-da-seca/arroz/mamona/soja; IV. Sistema "safra - forrageira"- soja + braquiária/milho + braquiária/arroz + braquiária/soja. Em novembro de 2009 (após três safras agrícolas, foi realizado o levantamento de plantas daninhas infestantes. Para isso, foi utilizado um quadro (0,3 x 0,3 m, lançado aleatoriamente quatro vezes dentro de cada parcela. As plantas foram identificadas, bem como feita a determinação do número total das espécies invasoras, da massa seca e da porcentagem de controle das espécies de acordo com o sistema de produção. Foi realizada ainda a análise fitossociológica da comunidade de plantas daninhas infestantes. Os sistemas safra-adubo verde, safra-safrinha e safra-forrageira apresentaram bom controle de plantas infestantes quando comparados ao sistema safra-pousio. Portanto, a presença de algum tipo de cobertura é importante para manter as características do solo favorável e um bom controle de plantas invasoras.Tillage and other agricultural production systems can contribute to weed suppression. Thus, the objective of this study was to evaluate weed control using different grain production systems. The treatments were: I. "Harvest-fallow" System- soybean/fallow/corn/fallow/rice/ fallow/soybean; II. "Harvest-green manure" System-soybean/millet/maize/pigeon pea/rice/ Crotalaria/soybean; III. "Harvest-out of season" System-soy/white oats/corn/dry bean/rice/castor oil

  15. Optimization of air conditioning systems utilizing low temperature thermal storage; Optimizacion de sistemas de acondicionamiento de aire utilizando sistemas de almacenamiento termico de baja temperatura

    Energy Technology Data Exchange (ETDEWEB)

    Contreras Ramirez, J.; Dorantes Rodriguez, R. [Departamento de Energia, Universidad Autonoma Metropolitana - Unidad Azcapotzalco, Mexico, D. F. (Mexico)

    1997-12-31

    In the last few years the different projects on the saving and efficient use of energy in the tertiary sector have been demonstrating the existing great potential in the air conditioning systems and equipment, whose intensive use is due to the predominance of hot and dry and hot and humid climate prevailing in a large part of the Mexican territory. Without any doubts one of the most serious problems facing the complex management and optimization of these systems is related to the variability of the thermal load and the regulation possibilities of the thermal machines, so as to attain, along the day an appropriate use and optimization of the total installed load, with the best possible economic benefits. Among the strategies that allow the optimization of the installed capacity and the variability of the thermal load is the low temperature thermal storage, for instance, the storage of ice, which is produced and stored to be used when the cooling machines are in standby in order to use this stored energy during the peak hours and during the normal operation of the equipment, but diminishing in a significant amount the electrical demand of the system to satisfy the thermal load with a combination thermal storage-cooling machine. This paper presents some case histories and the type of thermal storage commonly used; a methodology is discussed that allows to determine technically as well as economically the size of a thermal storage room. Some problems in the control and operation of these thermal systems are also presented. [Espanol] En los ultimos anos los diversos proyectos sobre ahorro y uso eficiente de la energia en el sector terciario han venido mostrando el gran potencial existente en los sistemas y equipos de aire acondicionado, cuyo uso intensivo se debe al predominio de los climas calidos seco y calido humedo en buena parte del territorio nacional. Sin lugar a dudas uno de los problemas mas serios que enfrenta la compleja gestion y optimizacion de estos

  16. Optimization of air conditioning systems utilizing low temperature thermal storage; Optimizacion de sistemas de acondicionamiento de aire utilizando sistemas de almacenamiento termico de baja temperatura

    Energy Technology Data Exchange (ETDEWEB)

    Contreras Ramirez, J; Dorantes Rodriguez, R [Departamento de Energia, Universidad Autonoma Metropolitana - Unidad Azcapotzalco, Mexico, D. F. (Mexico)

    1998-12-31

    In the last few years the different projects on the saving and efficient use of energy in the tertiary sector have been demonstrating the existing great potential in the air conditioning systems and equipment, whose intensive use is due to the predominance of hot and dry and hot and humid climate prevailing in a large part of the Mexican territory. Without any doubts one of the most serious problems facing the complex management and optimization of these systems is related to the variability of the thermal load and the regulation possibilities of the thermal machines, so as to attain, along the day an appropriate use and optimization of the total installed load, with the best possible economic benefits. Among the strategies that allow the optimization of the installed capacity and the variability of the thermal load is the low temperature thermal storage, for instance, the storage of ice, which is produced and stored to be used when the cooling machines are in standby in order to use this stored energy during the peak hours and during the normal operation of the equipment, but diminishing in a significant amount the electrical demand of the system to satisfy the thermal load with a combination thermal storage-cooling machine. This paper presents some case histories and the type of thermal storage commonly used; a methodology is discussed that allows to determine technically as well as economically the size of a thermal storage room. Some problems in the control and operation of these thermal systems are also presented. [Espanol] En los ultimos anos los diversos proyectos sobre ahorro y uso eficiente de la energia en el sector terciario han venido mostrando el gran potencial existente en los sistemas y equipos de aire acondicionado, cuyo uso intensivo se debe al predominio de los climas calidos seco y calido humedo en buena parte del territorio nacional. Sin lugar a dudas uno de los problemas mas serios que enfrenta la compleja gestion y optimizacion de estos

  17. Vigilancia y Control en el Sistema General de Seguridad Social en Salud (SGSSS

    Directory of Open Access Journals (Sweden)

    Gabriel Carrasquilla

    2004-03-01

    Full Text Available

    En nombre de la Academia Nacional de Medicina quiero agradecer la invitación a participar en este importante foro de discusión sobre un aspecto especialmente relevante del Sistema General de Seguridad Social en Salud. La Academia se ha caracterizado, en especial en los últimos años, por haber tenido una posición crítica pero constructiva frente al desarrollo del Sistema, pero también se ha destacado por su capacidad de convocatoria y ha abierto sus puertas para que se discuta de manera abierta, se genere la controversia y se planteen soluciones a los principales problemas del SGSSS.

    Por todo ello, la Academia mira con optimismo y espera con certeza que los resultados de este foro redunden en beneficio de la salud de los colombianos que es, en última instancia, el verdadero objetivo de un Sistema de Salud con un adecuado componente de vigilancia y control (V y C. Quizá uno de los aspectos mas relevantes que señala la Academia de Medicina en la concepción de la vigilancia y control del SGSSS es la de que se ha orientado a hacerlo desde la perspectiva de la salud como un concepto de mercado, vigilando que se cumplan sus leyes como lo hacen en las transacciones de mercado y la misma academia ya se ha manifestado, con suficiente claridad y universalmente, que la salud no cumple, no puede cumplir con esos principios. Por ello creemos que, desde sus comienzos, el componente de vigilancia y control se ha orientado erróneamente porque ha olvidado el objetivo verdadero de un Sistema de Salud que es, precisamente, la salud de la población

    La Medicina como Profesión y como Ciencia:

    Consistentemente la Academia de Medicina ha manifestado su preocupación porque en el actual SGSSS se ha perdido la concepción de la medicina como profesión y como ciencia. La salud de la población depende, en buena parte, de la idoneidad del profesional y de su capacidad para prevenir, para curar y para rehabilitar. No

  18. Urban traffic information system prototype: Use for Rome downtown area traffic control; 200 S.I.T.U. prototipo del sistema informativo per il traffico urbano: La sua applicazione allo studio della regolamentazione dell`accesso ai centri storici

    Energy Technology Data Exchange (ETDEWEB)

    Lombardi, L; Mattucci, A; Frondaroli, A

    1993-12-31

    This paper describes the characteristics, in terms of type of information and systems approaches utilized, of a prototype urban traffic simulator developed by ENEA (the Italian Agency for New Technology, Energy and the Environment). With reference to the development of the functional and architectural elements of this simulator, a preliminary review is made of problematics relevant to transportation system design, urban planning, and traffic control. The data base incorporated by the simulator is described and a comparison is made of different traffic modelling codes and man-machine interface methods. The paper concludes with an assessment of the results obtained with the first experimental application of the simulator in the control of the flow of traffic in Rome`s heavily congested downtown area.

  19. Controle pela carga de trabalho de um sistema flexível de manufatura

    Directory of Open Access Journals (Sweden)

    Daniel Battaglia

    2016-04-01

    Full Text Available O objetivo deste artigo foi calcular tempos de atravessamento e inventário médios em um sistema de manufatura flexível, que atende muitas ordens, de tamanho e mix variado. Foi aplicado o workload control (controle por carga de trabalho para o cálculo da situação atual, e simulação computacional (software ProModel para avaliar duas situação alternativas: aumento na demanda e redução na demanda. O método de pesquisa foi a modelagem quantitativa. Os resultados apontam que atualmente há excesso de inventário, provocado por desequilíbrio entre demanda e entrega da manufatura, o que é típico em sistemas de filas. Seria necessário sincronizar melhor entradas e saídas. Os cenários simulados apontam que a manufatura não suporta aumento de carga, crescendo continuamente o inventário, até a operação tornar-se inviável. Para estabilidade do inventário, seria necessário reduzir a demanda, se for mantido o atual regime de trabalho, com entradas aleatórias e independentes.

  20. Fluorescent lighting system of modified fast starting system; Sistema de alumbrado fluorescente de arranque rapido modificado

    Energy Technology Data Exchange (ETDEWEB)

    Mendoza E, Ernesto J [Manufacturera De Reactores, S. A., Mexico, D. F. (Mexico)

    1994-12-31

    This paper puts into perspective the possible energy saving in using hybrid ballasts for the operation of fast starting lamps. It presents in summarized form some fundamentals of the fluorescent lamps operation, as well as the fast starting modified systems. Also the results of field operation are shown, as well as the effects on the useful life of the lamp T12 as well as the T8. [Espanol] Este trabajo pone en perspectiva el ahorro de energia posible, al emplear balastros hibridos para operar lamparas de arranque rapido. Presenta en forma resumida algunos fundamentos de la operacion de lamparas fluorescentes, asi como de los sistemas de arranque rapido modificado. Se muestran tambien resultados de operacion de campo, asi como los efectos sobre la vida util de las lamparas, tanto T12 como T8.

  1. Fluorescent lighting system of modified fast starting system; Sistema de alumbrado fluorescente de arranque rapido modificado

    Energy Technology Data Exchange (ETDEWEB)

    Mendoza E, Ernesto J. [Manufacturera De Reactores, S. A., Mexico, D. F. (Mexico)

    1993-12-31

    This paper puts into perspective the possible energy saving in using hybrid ballasts for the operation of fast starting lamps. It presents in summarized form some fundamentals of the fluorescent lamps operation, as well as the fast starting modified systems. Also the results of field operation are shown, as well as the effects on the useful life of the lamp T12 as well as the T8. [Espanol] Este trabajo pone en perspectiva el ahorro de energia posible, al emplear balastros hibridos para operar lamparas de arranque rapido. Presenta en forma resumida algunos fundamentos de la operacion de lamparas fluorescentes, asi como de los sistemas de arranque rapido modificado. Se muestran tambien resultados de operacion de campo, asi como los efectos sobre la vida util de las lamparas, tanto T12 como T8.

  2. Information system on energy; Sistemas de informacoes energeticas

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, Claudio Bezerra de [Universidade do Estado da Bahia, Salvador, BA (Brazil)]. E-mail: claudiobcarvalho@yahoo.com.br; Bajay, Sergio Valdir [Universidade Estadual de Campinas, SP (Brazil). Nucleo Interdisciplinar de Planejamento Energetico (NIPE); Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia Mecanica. Dept. de Energia]. E-mail: bajay@fem.unicamp.br

    2006-07-01

    This work sets guidelines for the development of a National System of Information on Energy, a System of Executive Information and a System of Geographic Information, all for the Ministry of Mines and Energy, considering the current level of technology in the development of computer systems and the advantages accruing from the implementation of such systems for the energy industry agents and for the Ministry management. The applications of such systems and the main concepts and characteristics involved in their implementation are presented. (author)

  3. Análise do Sistema de Informação do Programa de Controle do Câncer de Mama (SISMAMA mediante avaliação de 1.000 exames nas cidades de Barra Mansa e Volta Redonda Analysis of the Breast Cancer Control Program Information System (SISMAMA, with review of 1,000 mammograms in the cities of Barra Mansa and Volta Redonda

    Directory of Open Access Journals (Sweden)

    Sissy Bullos Lins dos Santos

    2010-10-01

    Full Text Available OBJETIVO: Fazer uma análise do Sistema de Informação do Programa de Controle do Câncer de Mama (SIS-MAMA, implantado em 2009 pelo Ministério da Saúde. MATERIAIS E MÉTODOS: Tratou-se de um estudo retrospectivo, feito mediante análise de 1.000 fichas de requisição e resultado de mamografias realizadas pelo Sistema Único de Saúde (SUS nos municípios participantes desta pesquisa, no período de tempo compreendido entre agosto e outubro de 2009. Foram analisados a qualidade das informações enviadas através do processamento desses dados e os desvios gerados pelo não preenchimento ou pelo inadequado preenchimento dos dados nessas fichas. RESULTADOS: O problema mais frequentemente encontrado foi a omissão de dados nas fichas, principalmente no quesito cirurgias anteriores, constatando-se 302 omissões (30,2%. CONCLUSÃO: Apesar do Sistema necessitar de alguns ajustes, pelo lapso temporal transcorrido entre sua criação até sua implementação, esses ajustes não afetam diretamente a validade do Sistema, encontrando-se como principal fator de erros na alimentação do banco de dados do Ministério da Saúde o não preenchimento de informações relevantes para o fechamento dos laudos, e a falta de familiarização e capacitação dos profissionais envolvidos nesse processo e no repasse de dados do resultado da mamografia.OBJECTIVE: To analyze the Breast Cancer Control Program Information System (SISMAMA implemented in 2009 by the Brazilian Health Ministry. MATERIALS AND METHODS: This was a retrospective study involving the analysis of 1,000 requisition forms and results of mammograms performed by SUS - Sistema Único de Saúde (the Brazilian unified public health system in the cities participating in the present study, during the period from August to October/2009. The study covered the qualitative analysis of the information sent through the data processing and the deviations resulting from the failure or inappropriateness in the

  4. Quality assurance program of a respiratory gating irradiation system based on external and internal fiducial markers; Programa de garantia de calidad de un sistema de irradiacion con control respiratorio basado en marcadores fiduciales externos e internos

    Energy Technology Data Exchange (ETDEWEB)

    Zucca Aparicio, D.; Perez Moreno, J. M.; Fernandez Leton, P.; Garcia Ruiz-Zorrilla, J.; Minambres Moro, A.

    2011-07-01

    Respiratory Gating involves the administration of radiation during treatment delivery within a particular portion of the patients breathing cycle, so the absorbed dose administration with respiratory control techniques requires specific quality control to ensure the correctness of the delivered dose. The establishment of a Quality Control Program (QC) is proposed for the Respiratory Gating based techniques in order to have a better understanding of how this system works and to know its associated dosimetric impact. The influence of the CT acquisition under respiratory motion conditions has been analyzed for the treatment isocenter localization, using internal and external fiducial markers with IGRT techniques that allow the correlation of the isocenter positioning with the phase of the respiratory cycle. Radiation delivery in the presence of intra fraction organ motion causes an averaging or blurring of the static dose distribution over the path of motion increasing the beam penumbra of the radiation field and reducing the therapeutic region when the irradiation is not breath controlled. The feasibility of intensity modulated treatments (IMRT) for both static and dynamic techniques, managed by respiratory control has been tested, demonstrating the possibility of synchronizing the movement of the leaves in the microfluorimeter collimator (mMLC) with the gated beam irradiation. (Author) 45 refs.

  5. Isolated systems with wind power; Sistemas aislados con energia eolica

    Energy Technology Data Exchange (ETDEWEB)

    Cruz, I.; Arribas de Paz, L. [Proyecto de Sistemas Aislados con Energia Eolica. Ciemat. Madrid (Spain)

    1999-07-01

    The eolic energy could be exploited centralizedly, by groups of eolic generators connected to the electric net of distribution or transport, controlled by a principal control, under the denomination of eolic park. This form of exploitation is the more utilized nowadays, due to the betterment of the costs of installation, operation and maintenance working to great scale. (Author)

  6. Automatic control system for measuring currents produced by ionization chambers; Automatizacao de um sistema de medidas de correntes produzidas por camaras de ionizacao e aplicacao na calibracao do {sup 18}F e {sup 153}Sm

    Energy Technology Data Exchange (ETDEWEB)

    Brancaccio, Franco

    2002-07-01

    Ionization Chambers in current mode operation are usually used in Nuclear Metrology. Activity measurements are quickly performed by Ionization Chambers, with very good precision. For this purpose measurements of very low ionization currents, carried out by high quality instrumentation, are required. Usually, electrometers perform the current integration method under command of signals from an automation system, in order to reduce the measurement uncertainties. Among the measurement systems at the Laboratorio de Metrologia Nuclear (LMN) of IPEN, there are two ionization chamber systems. In the present work, an automation system developed for current integration measurements is described. This automation system is composed by software (graphic interface and control) and an electronic module connected to a microcomputer, by means of a commercial data acquisition card. Several test measurements were performed in order to determine the intrinsic uncertainty, linearity and stability of the system. Using calibrated radioactive solutions, the IG12/A20 chamber calibration factors for {sup 18}F and {sup 153}Sm were obtained, making possible to determine activities of these radionuclides. (author)

  7. 100-Mc counting system; Ensemble de comptage a 100 megacycles; Schetnaya sistema na 100 megatsiklov; Sistema contador de 100 megaciclos

    Energy Technology Data Exchange (ETDEWEB)

    Sugarman, R; Higinbotham, W A; Yonda, A H [Brookhaven National Laboratory, Upton, Long Island, NY (United States)

    1962-04-15

    A complete 100-Mc counting system is described for use in experiments with accelerators. Current-switching logic, using both transistors and germanium tunnel diodes, is used for all high-speed logic. All critical circuits have a rise-time and time-jitter of 2 ns or less. The logical elements are a pulse-height limiter, a discriminator, a multichannel coincidence circuit, a four-fold fanout, and a scale of 8. The fanout enables a limiter or discriminator output to drive any combination of four elements. Each element is a separate plug-in module. Elements are interconnected by a 50-{Omega} cable with at least one termination. Most module inputs and outputs are compatible so that, for example, a discriminator can either drive or be driven from a coincidence circuit by switching cables. To insure reliable high-speed operation and good time and temperature stability the transistors were operated at unity change-gain either in a current-switching mode or in a linear mode as a distributed amplifier. Each tunnel diode provided an additional switching charge-gain of from 2 to 5 with the same stability and bandpass as the transistors. Each module was designed for operation up to a continuous counting rate of 100 megapulses per second. High system duty cycles were made possible by DC interconnections and by double-delay-line clipping for recovery between pulses. No loss in system performance is anticipated for counting rates to 50 Mc. The basic discriminator has a sensitivity adjustable from 2 to 10 mA with a DC-Coupled output of 10 mA at ground potential. Output rise and fall times are 1 ns; pulse width is set by delay cable; maximum output duty cycle is 50% for 95% input recovery. Time jitter from threshold firing to three times that level is 2 ns or less. A more sophisticated version has 10 times the sensitivity. It has a distributed amplifier and a switching chain of two tunnel diodes. Output specifications are the same. Other logic systems for discriminators will also be

  8. Sistema Avanzado de Protipado Rápido para Control en la Educación en Ingeniería para grupos Multidisciplinares

    Directory of Open Access Journals (Sweden)

    Antonio Flores Caballero

    2016-07-01

    Full Text Available Resumen: Con el objetivo de alcanzar resultados satisfactorios en la enseñanza y puesta en práctica de cursos semestrales de ingeniería de control, en los que la presencia de alumnos de distintas disciplinas es más que notoria, se torna necesario recurrir a altos niveles de abstracción en la programación de los sistemas de control. Este alto nivel de abstracción procede del uso de un sistema de prototipado rápido para control de carácter avanzado, que permite recurrir a funcionalidades que no habían sido previstas en ningún entorno de prototipado rápido para control disponible con anterioridad. El carácter avanzado del sistema brinda soluciones desde el más alto nivel de abstracción, el denominado diseño basado en modelos, para las intricadas relaciones necesarias entre la ingeniería de control y la informática en tiempo real, permitiendo que los alumnos puedan centrar su esfuerzo en el desarrollo del algoritmo de control, la identificación de sistemas y el modelado de plantas físicas en lugar de preocuparse por las tediosas tareas de gestión y configuración a bajo nivel de la arquitectura hardware que están empleando. Gracias a este alto nivel de abstracción, que cubre el espectro abarcado por funcionalidades de muy bajo nivel y funcionalidades de muy alto nivel, el manejo del sistema propuesto se encuentra al alcance de audiencias multidisciplinares. El sistema avanzado de prototipado rápido para control se está empleando para cursos semestrales así como en multitud de Tesis de Máster y Doctorales. Abstract: In order to achieve successful results in the control courses for a multidisciplinary audience, a high abstraction layer at programming is required. This abstraction is provided by a custom developed rapid control prototyping system that enables the usage of model based design techniques to control real plants. Model based design is focused on the research and development of the control algorithm, system

  9. Concordância do sistema de pontos para controle de colesterol e gordura no sangue

    Directory of Open Access Journals (Sweden)

    Nacif Marcia de Araujo Leite

    2004-01-01

    Full Text Available OBJETIVO: Avaliar a compreensão do sistema de pontos para controle de colesterol e gordura no sangue, como instrumento de intervenção dietética para pacientes hipercolesterolêmicos. MÉTODOS: Estudados 153 indivíduos de ambos os sexos, com idades entre 20 e 65 anos, atendidos em um hospital e uma unidade básica de saúde, divididos em três grupos: hipercolesterolêmicos; sem diagnóstico de hipercolesterolemia e profissionais da área de saúde. Aplicado recordatório de 24h em cada indivíduo, que fazia a pontuação de índice de colesterol e gordura saturada de sua dieta, consultando o sistema de pontos, e a pesquisadora confirmava os cálculos de cada participante, sendo esta considerada o padrão de referência. O entendimento do sistema foi avaliado pela comparação entre a medida de referência e os dados obtidos pelos entrevistados, utilizando-se o coeficiente de correlação intraclasse. RESULTADOS: Os pacientes sem diagnóstico obtiveram alta correlação em todas as refeições. O café da manhã, a merenda e a ceia foram as refeições que obtiveram maior correlação (r=1. Nos hipercolesterolêmicos, a ceia foi a refeição que mais concordou com a pontuação de referência (r=1 e quanto aos profissionais de saúde obteve-se coeficiente de correlação de 1 em todas as refeições, exceto o almoço (r=0,99. CONCLUSÃO: O sistema de pontos mostrou-se rápido, simples e fácil de ser compreendido e aceito pela população estudada.

  10. Measurement of harmonics in electrical power systems; Medicion de armonicas en sistemas electricos

    Energy Technology Data Exchange (ETDEWEB)

    Calderon Gonzalez, Gustavo Adolfo

    1998-07-01

    In this thesis project a system for the quantification and study of the harmonics content in electrical systems was developed. The study is focused to signals of feeding current to a Long Arc furnace. The system developed for the quantification of the harmonics content is formed by the following parts: (a) Data acquisition system: The application of a data acquisition system makes possible for us to take samples from an analogous voltage signal. The acquired samples that represent an analogous signal, can later be processed in a digital computer. The data acquisition system is constituted by: An IBM-PC microcomputer, a digitalization card of analogous signals, and programs to conduct signals sampling (b) Digital processing of the acquired signals: With the purpose of obtaining the harmonic content, the Fast Fourier Transform method was used. The analysis by means of the Fast Fourier Transform allows us to obtain the signals spectra in the frequency dominion. Through the analysis by means of the Fast Fourier Transform a substantial diminution of the calculation time of the coefficients corresponding to the harmonics is obtained, this compared with the method of Discreet Fourier Series. (c) Analysis of obtained results: Several line current and capacitors measurements of the feeding system signals of an arc furnace were made. For each measurement made the magnitude and the phase for each harmonic was obtained. Of the assembly of coefficient magnitudes and phases, the average value and its standard deviation were calculated. Graphs of the magnitude variation with time and phase of each harmonic are shown. Also, graphs of the waveform of the signal in analysis are obtained, bar charts of the average spectral content and a report of the standard deviation of the magnitude and the phase for each harmonica, is obtained. Results of a simulation of the electrical system in analysis are included and the results are compared. [Spanish] En este proyecto de tesis se desarrollo

  11. TOFD IMAGING SYSTEM IN NONDESTRUCTIVE TESTS SISTEMA DE FORMACIÓN DE IMÁGENES TOFD PARA ENSAYOS NO DESTRUCTIVOS SISTEMA DE FORMAÇÃO DE IMAGENS TOFD PARA ENSAIOS NÃO DESTRUTIVOS

    Directory of Open Access Journals (Sweden)

    Darío Segura

    2012-06-01

    Full Text Available This paper shows how the symbiosis of two disciplines, software engineering and ultrasonic techniques, made possible the development of a nondestructive testing system for TOFD imaging, and it also allowed to make the application of commercial computation tools independent. It illustrates the addition of three algorithms to the system, and they are tested by examining a metal cylinder containing a visible defect. The core of the system is an ultrasound card controlled through a computer application designed in.NET.En el presente trabajo se muestra cómo la simbiosis de dos disciplinas, ingeniería de software y técnicas ultrasónicas, hizo posible el desarrollo de un sistema de ensayos no destructivos para formación de imágenes TOFD, que además permite independizar la aplicación respecto de las herramientas para cómputo comerciales. Se ilustra la incorporación de tres algoritmos al sistema y se prueban mediante el examen a una probeta metálica que contiene un defecto visible. El núcleo del sistema es una tarjeta de ultrasonido controlada por medio de una aplicación para computador diseñada en .NET.No presente trabalho mostra-se como a simbiose de duas disciplinas, engenharia de software e técnicas ultrassônicas, fez possível o desenvolvimento de um sistema de ensaios não destrutivos para formação de imagens TOFD, que ademais permite independizar a aplicação respeito das ferramentas para cômputo comerciais. Ilustra-se a incorporação de três algoritmos ao sistema, e provam-se mediante o exame a uma proveta metálica que contém um defeito visível. O núcleo do sistema é um cartão de ultrassom controlado por médio de uma aplicação para computador desenhada em .NET.

  12. Polymer matrices obtained by ionizing radiation for using in controlled drug delivery systems; Matrizes polimericas obtidas mediante radiacao ionizante para sua utilizacao como sistemas de liberacao controlada de farmacos

    Energy Technology Data Exchange (ETDEWEB)

    Martellini, Flavia

    1998-07-01

    Two kinds of controlled drug delivery system were obtained by gamma radiation induced polymerization. One of the system was obtained from an acrylic derivative of acetaminophen (40-hydroxyacetanilide), by copolymerization of 4-(acryloyloxy) acetanilide and N,N-dimethylacrylamide (DMAA) in dimethylformamide solution with 0,16 kGy/h dose rate and 54 Gy dose. The values of reactivity rate, r-D{sub MAA} = 0,31 {+-} 0,02 e r{sub AOA} -0,07 {+-} 0,12, were determined by Fineman-Ross method. The acetaminophen hydrolysis was carried out in alkaline and enzymatic (trypsin) media. Another kind of drug delivery system studied was solvent controlled type, being the drug immobilized in the hydrogel,. The hydrogels prepared by radiation polymerization of acryloyl-L-propine methylester (A-Pro-OMe) with 10 Gy dose, showed thermosensible property, swelling or shrinking in water with decreased or increased temperatures. The hydrogels were obtained with different crosslink density, trimethylolpropane trimethacrylate, and the monomers N, N-dimethyl acrylamide (DMAA) and 2-cyanoethyl acrylate to study the influence of the composition in the drug delivery rate. It was verified that the porous size besides being a characteristic of the matrix composition, it was also temperature dependent (thermosensible). The analgesic drug acetaminophen was immobilized by entrapment and by physical adsorption into the hydrogels matrices for 'in vitro' study. The insulin was immobilized by adsorption for 'in vivo' study. (author)

  13. SISTEMA DE CONTROL DE UN MANIPULADOR MECÁNICO POR DETECCIÓN DE VOZ

    Directory of Open Access Journals (Sweden)

    Javier Darío Barrios Cárdenas

    2013-01-01

    Full Text Available En este trabajo se presenta el diseño e implementación del sistema de control de un manipulador mecánico por detección de voz, para la asistencia a discapacitados. Está conformado por un circuito de reconocimiento de voz que convierte las palabras en datos binarios que se guardan en una memoria RAM y al mismo tiempo se procesan por medio de un microcontrolador para que puedan ser visualizados en una pantalla LCD y enviados a través de un cable de datos al circuito de control de un manipulador mecánico quien ejecuta las órdenes producto del reconocimiento.

  14. Information systems for civil engineering; Sistemas de informacion para ingenieria civil

    Energy Technology Data Exchange (ETDEWEB)

    De Buen R, Pablo R; Alvarado G, Alonso; Alaniz Q, Felipe de J; Guerrero F, Vicente A. [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2004-07-01

    Since its beginnings, in the Gerencia de Ingenieria Civil (GIC) of the Instituto de Investigaciones Electricas (IIE) the interest has existed to take advantage of and to promote the advantages that the appropriate use of the computerizing systems in the different tasks of civil engineering in the power sector represent. Either as a part of its infrastructure or at the request of their clients, at the GIC have been developed calculation systems for the analysis and design of special structures such as turbo-generators foundations, poles for transmission and distribution and transmission towers, in addition the information systems for the consultation and the analysis of diverse information, such as the related to the Manuals of Civil Works of the Comision Federal de Electricidad (CFE) or the relative to the existing instruments in the large dams of our country. In this article are briefly described some of the computer systems developed by the GIC in recent years. [Spanish] Desde sus inicios, en la Gerencia de Ingenieria Civil (GIC) del Instituto de Investigaciones Electricas (IIE) ha existido el interes por aprovechar y promover las ventajas que representa el uso adecuado de los sistemas de computo en las diferentes tareas de ingenieria civil en el sector energetico. Ya sea como parte de su infraestructura o a solicitud de sus clientes, en la GIC se han desarrollado sistemas de calculo para el analisis y diseno de estructuras especiales como lo son las cimentaciones de turbogeneradores, los postes para transmision y distribucion y las torres de transmision, ademas de sistemas de informacion para la consulta y el analisis de informacion diversa, como es la relacionada con los manuales de obras civiles de la Comision Federal de Electricidad (CFE) o a la relativa a los instrumentos existentes en las grandes presas de nuestro pais. En este articulo se describen brevemente algunos de los sistemas de computo desarrollos por la GIC en anos recientes.

  15. Solución aproximada de sistemas diferenciales mixtos Approximated solution of differentials mixed systems

    Directory of Open Access Journals (Sweden)

    Jorge I. Castaño–Bedoya

    2009-12-01

    Full Text Available En este artículo se propone encontrar una solución aproximada para problemas de valor en la frontera y problemas de valor inicial de un sistema diferencial utilizando el método de los desarrollos de Fer.In this paper we propose to find an approximate solution to boundary value problems and initial value differential system problems using the method of Fer developments.

  16. OGRODJE POSLOVNEGA INFORMACIJSKEGA SISTEMA "MOONLIGHT BUSINESS SYSTEM" Z UPORABO TEHNOLOGIJE WPF

    OpenAIRE

    Drajzibner, Denis

    2011-01-01

    Diplomska naloga zajema raziskavo med že obstoječima poslovno informacijskima sistemoma IBM - Lotus Notes in Microsoft - Navision. Zanimivosti teh poslovno informacijskih sistemov so na kratko opisane. V diplomski nalogi je predstavljena idejna zasnova in implementacija lastnega poslovno informacijskega sistema »MoonLight Business System«. Implementacija je izvedena v WPF tehnologiji, ki je predstavljena v teoretičnem delu kakor tudi ostale tehnologije, ki se uporabljajo v »MoonLight Business...

  17. Cooling system for the IFMIF-EVEDA radiofrequency system; Sistema de refrigeracion del sistema de radiofrecuencia del IFMIF-EVEDA

    Energy Technology Data Exchange (ETDEWEB)

    Perez Pichel, G. D.

    2012-07-01

    The IFMIF-EVEDA project consists on an accelerator prototype that will be installed at Rokkasho (Japan). Through CIEMAT, that is responsible of the development of many systems and components. Empresarios Agrupados get the responsibility of the detailed design of the cooling system for the radiofrequency system (RF system) that must feed the accelerator. the RF water cooling systems is the water primary circuit that provides the required water flow (with a certain temperature, pressure and water quality) and also dissipates the necessary thermal power of all the radiofrequency system equipment. (Author) 4 refs.

  18. Sistemas expertos y su aplicación en medicina Medical expert systems

    Directory of Open Access Journals (Sweden)

    Javier E. Fox

    1991-03-01

    Full Text Available

    El presente artículo es una revisión de los Sistemas Expertos Médicos como aplicación concreta de la inteligencia Artificial. Se hace un recuento histórico de los mismos desde la década de los setenta; se dan nociones generales sobre lo que son los Sistemas Expertos, su arquitectura interna y las personas que Interactúan con ellos para hacer posibles su desarrollo y aplicación; se destacan sus ventajas y desventajas y se integran los conocimientos básicos sobre Sistemas Expertos con el prototipo PULMONOLOGIST que hace diagnóstico diferencial de quince enfermedades pulmonares y muestra al usuario el diagnóstico más probable, los síntomas que dejó de exhibir el paciente, las pruebas confirmatorias realizadas y el tratamiento recomendado.

    A review on medical diagnostic systems based on computer programs (Medical Expert Systems-MES as an application of artificial intelligence is presented. It includes a historical account, general notions, internal architecture of Expert Systems, subjects who interact with them during their development and application, as well as advantages and disadvantages. PULMONOLOGIST, a MES for differential diagnosis of pulmonary diseases, is presented as an example of the potential of this technology.

  19. Wind power prognosis statistical system; Sistema estadistico de pronostico de la energia eoloelectrica

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez Garcia, Alfredo; De la Torre Vega, Eli [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2009-07-01

    The integration of the first Aeolian farm of large scale (La Venta II) to the National Interconnected System requires taking into account the random and discontinuous nature of the Aeolian energy. An important tool, for this task, is a system for the prognosis of the Aeolian energy in the short term. For this reason, the Instituto of Investigaciones Electricas (IIE) developed a statistical model to realize this prognosis. The prediction is done through an adaptable linear combination of alternative competing models, where the weights given to each model are based on its more recent prognosis quality. Also, the application results of the prognoses system are presented and analyzed. [Spanish] La integracion de la primera grana eolica de gran escala (La Venta II) al Sistema Interconectado Nacional requiere tomar en cuenta la naturaleza aleatoria y discontinua de la energia eolica. Una importante herramienta, para esta tarea, es un sistema para el pronostico de la energia eolica a corto plazo. Por ello, el Instituto de Investigaciones Electricas (IIE) desarrollo un modelo estadistico para realizar este pronostico. La prediccion es hecha a traves de una combinacion lineal adaptable de modelos competidores alternativos, donde los pesos dados a cada modelo estan basados en su mas reciente calidad de pronostico. Tambien se presentan y analizan los resultados de la aplicacion del sistema de pronosticos.

  20. Reliability of hydroelectric generation components, systems and units; Confiabilidad de componentes, sistemas y unidades de generacion hidroelectrica

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez Sanchez, Ramon; Torres Toledano, Gerardo; Franco Nava, Jose Manuel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1996-12-31

    This article presents a methodology for the calculation of the reliability of components, systems and hydroelectric generating units, as well as the scope of a computational system for the evaluation of such reliability. In the case of the reliability calculation of components and systems, the computer programs is not limited to hydro stations and can be used in other type of systems. [Espanol] En este articulo se presenta una metodologia para calcular la confiabilidad de componentes, sistemas y unidades de generacion hidroelectrica, asi como el alcance de un sistema computacional para evaluar dicha confiabilidad. En el caso del calculo de confiabilidad de componentes y sistemas, el programa de computo no se limita a centrales hidroelectricas y puede utilizarse en otro tipo de sistemas.

  1. Reliability of hydroelectric generation components, systems and units; Confiabilidad de componentes, sistemas y unidades de generacion hidroelectrica

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez Sanchez, Ramon; Torres Toledano, Gerardo; Franco Nava, Jose Manuel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1997-12-31

    This article presents a methodology for the calculation of the reliability of components, systems and hydroelectric generating units, as well as the scope of a computational system for the evaluation of such reliability. In the case of the reliability calculation of components and systems, the computer programs is not limited to hydro stations and can be used in other type of systems. [Espanol] En este articulo se presenta una metodologia para calcular la confiabilidad de componentes, sistemas y unidades de generacion hidroelectrica, asi como el alcance de un sistema computacional para evaluar dicha confiabilidad. En el caso del calculo de confiabilidad de componentes y sistemas, el programa de computo no se limita a centrales hidroelectricas y puede utilizarse en otro tipo de sistemas.

  2. Sistema fuzzy para estimativa do bem-estar de matrizes pesadas System fuzzy for estimate of welfare of broiler breeders

    Directory of Open Access Journals (Sweden)

    Danilo F. Pereira

    2008-12-01

    Full Text Available Entender o comportamento e suas pequenas variações decorrentes das mudanças do ambiente térmico e desenvolver modelos que simulem o bem-estar a partir de respostas das aves ao ambiente constituem o primeiro passo para a criação de um sistema de monitoramento digital de aves em galpões de produção. Neste trabalho, foi desenvolvido um sistema de suporte à decisão com base na teoria dos conjuntos fuzzy para a estimativa do bem-estar de matrizes pesadas em função de frequências e duração dos comportamentos expressos pelas aves. O desenvolvimento do sistema passou por cinco etapas distintas: 1 organização dos dados experimentais; 2 apresentação dos vídeos em entrevista com "especialista"; 3 criação das funções de pertinência com base nas entrevistas e na revisão da literatura; 4 simulação de frequências de ocorrências e tempos médios de expressão dos comportamentos classificados como indicadores de bem-estar utilizando equações de regressão obtidas na literatura, e 5 construção das regras, simulação e validação do sistema. O sistema fuzzy desenvolvido estimou satisfatoriamente o bem-estar de matrizes pesadas, tendo na sua última versão, com maior número de regras, acertado 77,8% dos dados experimentais, comparados com as respostas esperadas por um especialista. O sistema pode ser utilizado como instrumento matemático-computacional para apoiar decisões em galpões de produção de matrizes pesadas.To understand the behavior and its small variations originated from changes of the thermal environment and to develop models that simulate the welfare from broiler breeders' answer to the environment constitute the first step for the creation of a system for digital monitoring of broiler breeders housing. In this paper it was developed a system of decision support based on the fuzzy conjuncts' theory to estimate the welfare of broiler breeders in function of frequencies and times of occurrences of behaviors. The

  3. A maximum power point tracker for photovoltaic system using a PIC microcontroller; Controlador de potencia maxima para sistemas fotovoltaicos (SFVs) utilizando un microcontrolador PIC

    Energy Technology Data Exchange (ETDEWEB)

    Guzman, Eusebio; Mendoza, Victor X; Carrillo, Jose J . A; Galarza, Cristian [Universidad Autonoma Metropolitana, Mexico, D.F. (Mexico)

    2000-07-01

    A maximum power point tracker MPPT for photovoltaic systems is presented. The equipment can output up to 600 W and its control signals are generated by a PIC microcontroller. The principle of control is based on current and voltage sampling at the output terminals of the photovoltaic generator. From power comparison of two consecutive samples, it is possible to know how far from the optimal point the system is working. Output voltage control is used to force the system to work within the optimal area of operation. The microcontroller program sequence, the DC/DC converter structure and the most relevant results are shown. [Spanish] En este trabajo se presenta el desarrollo de un controlador de potencia maxima para su aplicacion en sistemas fotovoltaicos (SFVs). El diseno alcanza una potencia de 600 W y sus senales de control son generadas con un controlador PIC. El principio de control se basa en el muestreo de la corriente y la tension en las terminadas del generador fotovoltaico GFV. De dos muestreos consecutivos, y por comparacion de las potencias, se determina que tan alejado del punto optimo opera el sistema. La operacion del sistema dentro de la zona de funcionamiento optimo se asegura mediante un control por tension. Se muestra la secuencia de programacion del microcontrolador, la estructura del convertidor CD/CD empleado y algunos resultados relevantes.

  4. Sistema de supervisión y control para los enfriadores de placas y los tanques de contactos.

    Directory of Open Access Journals (Sweden)

    Eliecer Méndez Méndez

    2011-01-01

    Full Text Available Se realizó la sustitución del equipamiento obsoleto de automatización de las áreas de Enfriadores de Placas y Tanques de Contactos, por un Sistema de Supervisión y Control, formado por un PLC y el sistema SCADA. Para esto se estudió el lenguaje de programación existente en los equipos anteriores, se interpretaron los códigos, se identificó la programación de los lazos de medición y regulación existentes y se adicionaron nuevas mediciones. Se realizó el proyecto, la compra, el montaje, la programación y la puesta en marcha. El nuevo sistema mejoró el control y la supervisión y contribuyó a elevar la eficiencia tecnológica.

  5. PROPUESTA DE UN MODELO DE CONTROL FISCAL PARA EL ESTADO COLOMBIANO: EL SISTEMA DE CONTROL FISCAL NACIONAL

    Directory of Open Access Journals (Sweden)

    Héctor Ochoa Díaz

    2003-01-01

    Full Text Available En Colombia se ha venido aplicando el modelo de control fiscal que definió la Constitución de 1991, en el cual los departamentos y municipios disponen de autonomía para la organización y selección de los respectivos contralores. En lugar de mejorar el sistema de control fiscal, la politiquería y el clientelismo político lo han deteriorado en su calidad, con el consiguiente aumento innecesario de gastos en su operación. Esto ha facilitado la realización de numerosos ilícitos en los gobiernos locales y ha estimulado el avance de la corrupción. En este trabajo se establece un diagnóstico de la situación y se plantea un nuevo modelo que corresponde a un sistema integral de control fiscal para la nación colombiana, cuyas funciones serían técnicas, no políticas, para lo cual se conformaría una rama especializada, técnica y autónoma del Estado colombiano, que cubriría la vigilancia fiscal en los diferentes niveles del Gobierno: central, departamental y municipal.

  6. Geographical Information Systems (GIS); Sistemas de Informacion Geografica

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Santiago, P.A. [Inisel Espacio, Madrid (Spain)

    1994-12-31

    Geographical Information Systems (GIS) have converted in a computer`s tool that due of its great versatility, exceeds of its usage as Basic Cartography Manager. The best GIS to use (vector or raster) will depend on the type of data we work with, we should keep in mind that the use of a specific GIS does not mean total incompatibility with others GIS. Future tendencies in this field aim to Data Storage Optimization and to Shared Operating System between Workstations and Personal computers. (Author)

  7. Prilog optimalnom projektovanju aktivnog sistema za oslanjanje vozila / A contribution to optimal design of vehicle active suspension system

    Directory of Open Access Journals (Sweden)

    Miroslav Demić

    2005-05-01

    Full Text Available U ovom radu prikazanje sistem za aktivno oslanjanje vozila, uz korišćenje ravanskog modela vozila, bez filtera u povratnim spregama sistema za regulaciju. Za optimizaciju parametara PI kontrolera korišćena je metoda stohastičke parametarske optimizacije. Cilj optimizacije bio je istovremeno minimiziranje vibracijskih ubrzanja oslonjene mase i standardnog odstupanja sila u kontaktima točkova i tla, što poboljšava udobnost i ponašanje vozila na putu. / In this paper, an active suspension system is developed by use of a vehicle plane model without feedback filters in control system. A method of stochastic parameters optimization has been utilized in order to optimize PI controller parameters. The basic optimization goal was a simultaneous minimization of sprung mass acceleration and standard deviation of forces in tire-to-ground contact area, so as to improve vehicle comfort and handling performances.

  8. Electoral system and political parties in Mexico (1994-2000 Sistema electoral y sistema de partidos en México (1994-2000

    Directory of Open Access Journals (Sweden)

    Ernesto HERNÁNDEZ NORZAGARAY

    2010-10-01

    Full Text Available The article explores the consequences of the electoral formula and the effective threshold, the size of electoral circumscriptions and the number of congressional representatives on the levels of disproportional representation that exists in the legislature since the federal elections of 1994 in Mexico. Following this, and through the use of a number of political indices the article assesses the impact of these factors on the political party system. In particular the study examines levels of concentration and competition, of political party fragmentation, and levels of electoral polarisation and volatility. The main objective is to determine the institutional impact of the «period of reforms» on the configuration of a new political party system in Mexico.Key words: México, electoral system, political party system, fragmetation, volatility.En este trabajo sobre el sistema electoral y el sistema de partidos políticos en México, exploramos las consecuencias que han tenido la fórmula electoral y el umbral efectivo, la magnitud de las circunscripciones y el tamaño del Congreso legislativo, en los niveles de desproporcionalidad existente en el poder legislativo desde las elecciones federales de 1994. Así mismo, como extensión de ese esfuerzo, mediante diversos índices politológicos profundizamos en los efectos que ha tenido en el sistema de partidos. En particular, interesa estudiar los niveles de concentración y competitividad, la fragmentación y número efectivo de partidos, la polarización y volatilidad del voto. En suma, pretendemos determinar cuál es el impacto institucional del llamado «periodo de reformas» en la conformación de un nuevo sistema de partidos políticos mexicanos.

  9. Controle do carrapato Boophilus microplus (Acari: Ixodidae em sistemas de produção de leite da microrregião fisiográfica fluminense do grande Rio - Rio de Janeiro Control of the cattle tick Boophilus microplus (Acari: Ixodidae in dairy farm systems of the physiographic microrregion of grande Rio, Rio de Janeiro, Brazil

    Directory of Open Access Journals (Sweden)

    Juracy de Castro Borba Santos Júnior

    2000-04-01

    Full Text Available O objetivo do trabalho foi analisar os métodos de controle do carrapato Boophilus microplus realizados em três fazendas representativas dos sistemas de produção de leite da Microrregião Fisiográfica Fluminense do Grande Rio, Rio de Janeiro, levando-se em consideração o manejo das fazendas, o grau de sangue Bos taurus e Bos indicus dos rebanhos, os fatores climáticos e a prevalência estacional do carrapato. Para efeito de avaliação, foi utilizada a contagem periódica de fêmeas ingurgitadas medindo entre 4,5 e 8mm, no antímero direito de 20% das vacas em lactação de cada fazenda, durante um ano. A diferença no manejo das pastagens, a composição genética dos rebanhos e as condições climáticas influenciaram a prevalência estacional de B. microplus. A maior lotação animal por hectare, o elevado "stand" vegetativo das pastagens e o maior grau de sangue B. taurus contribuíram para as maiores infestações de carrapatos nas fazendas. O controle de B. microplus realizado pelos proprietários teve importância secundária em relação as outras atitudes de manejo dos rebanhos. Ficou evidenciado o uso excessivo e ineficiente de produtos químicos para o controle de B. microplus nas fazendas. Para implantação de medidas de controle estratégico do B. Microplus, fazem-se necessários esforços para a transferência e adoção dos resultados de pesquisas disponíveis aos produtores rurais.The objective of the study was to analyse the control methods of the cattle tick, Boophilus microplus. The experiment was carried out on three farms of the dairy production systems of the Fluminense Physiographic Microregion of Grande Rio, Rio de Janeiro State, Brazil. Farm management, the Bos indicus and Bos taurus composition of herds, climatic factors and seasonal variation in tick infestation level of cattle was taken into account. Counts of engorged female ticks, measuring between 4.5 and 8.0mm, in 20% of the lactating cows of each farm

  10. Wood carbonization systems; Sistemas de carbonizacao da madeira

    Energy Technology Data Exchange (ETDEWEB)

    Pontes, Raquel de Santana [Instituto de Tecnologia da Amazonia, Manaus, AM (Brazil)

    1990-12-31

    This work presents the evolution of the charcoal production systems, commenting their advantages and disadvantages, aiming to guide the choice of the ideal option, considering the aimed production, the quality of the products and the local economical situation. The work also points that, in adequate situations, this may be a good choice for energy production 22 refs., 6 figs., 3 tabs.

  11. Wood carbonization systems; Sistemas de carbonizacao da madeira

    Energy Technology Data Exchange (ETDEWEB)

    Pontes, Raquel de Santana [Instituto de Tecnologia da Amazonia, Manaus, AM (Brazil)

    1991-12-31

    This work presents the evolution of the charcoal production systems, commenting their advantages and disadvantages, aiming to guide the choice of the ideal option, considering the aimed production, the quality of the products and the local economical situation. The work also points that, in adequate situations, this may be a good choice for energy production 22 refs., 6 figs., 3 tabs.

  12. A structure-preserving approach to normal form analysis of power systems; Una propuesta de preservacion de estructura al analisis de su forma normal en sistemas de potencia

    Energy Technology Data Exchange (ETDEWEB)

    Martinez Carrillo, Irma

    2008-01-15

    Power system dynamic behavior is inherently nonlinear and is driven by different processes at different time scales. The size and complexity of these mechanisms has stimulated the search for methods that reduce the original dimension but retain a certain degree of accuracy. In this dissertation, a novel nonlinear dynamical analysis method for the analysis of large amplitude oscillations that embraces ideas from normal form theory and singular perturbation techniques is proposed. This approach allows the full potential of the normal form method to be reached, and is suitably general for application to a wide variety of nonlinear systems. Drawing on the formal theory of dynamical systems, a structure-preserving model of the system is developed that preservers network and load characteristics. By exploiting the separation of fast and slow time scales of the model, an efficient approach based on singular perturbation techniques, is then derived for constructing a nonlinear power system representation that accurately preserves network structure. The method requires no reduction of the constraint equations and gives therefore, information about the effect of network and load characteristics on system behavior. Analytical expressions are then developed that provide approximate solutions to system performance near a singularity and techniques for interpreting these solutions in terms of modal functions are given. New insights into the nature of nonlinear oscillations are also offered and criteria for characterizing network effects on nonlinear system behavior are proposed. Theoretical insight into the behavior of dynamic coupling of differential-algebraic equations and the origin of nonlinearity is given, and implications for analyzing for design and placement of power system controllers in complex nonlinear systems are discussed. The extent of applicability of the proposed procedure is demonstrated by analyzing nonlinear behavior in two realistic test power systems

  13. SIAT - Sistema de Avaliação de Terras SIAT - Land Evaluation System

    Directory of Open Access Journals (Sweden)

    Gilberto J. Garcia

    2001-05-01

    Full Text Available O presente trabalho teve como objetivo adaptar o sistema MicroLEIS - Land Evaluation Information System de origem espanhola, às condições do sudeste brasileiro; para tanto, foram consideradas 12 variáveis, discriminadas a seguir: A - Fator Relevo: 1 Declividade; B - Fator Solo: 2 Profundidade Útil; 3 Tipo de Textura; 4 Pedregosidade e/ou Afloramento; 5 Tipo de Drenagem; 6 Salinidade Total; C - Fator Risco à Erosão: 7 Erodibilidade; 8 Declividade; 9 Densidade da Vegetação; 10 Erosividade da Chuva; D - Fator Deficiência Bioclimática: 11 Risco de Geadas e 12 Água Disponível. Para estas variáveis, foram modificados os parâmetros de controle, de acordo com as condições dos solos paulistas, sendo que Salinidade Total foi trocada por Acidez (pH; em seguida, o SIAT foi interfaceado com um SIG - Sistema de Informação Geográfica - no caso o IDRISI, para facilitar a entrada, o processamento e a espacialização dos resultados. A estrutura do programa também foi modificada, de maneira que a linguagem de programação passou de Basic para C, além de receber um banco de dados (Clipper e rotinas para tornar o programa mais amigável. O programa modificado foi testado na região de Leme, SP, onde mostrou que, embora proporcione resultados satisfatórios em escalas grandes, é mais indicado em avaliações regionais para escalas entre 1:100.000 e 1:50.000.The purpose of this work was to adapt the MicroLEIS - Land Evaluation Information System developed in Spain to the Brazilian Southeast conditions. Twelve (12 variables were considered, as follows: A - Relief Factor: 1 Slope; B - Soil Factor: 2 Effective depth, 3 Texture, 4 Stoniness, 5 Drainage, 6 Salinity; C - Erosion Factor: 7 Erodibility, 8 Slope, 9 Vegetation density, 10 Rainfall erosivity; D - Bioclimatic Deficiency Factor: 11 Frost, 12 Available water. For each of them, the control parameters were changed, according to conditions of the soils of the State of São Paulo. In this case

  14. Design and Management of Irrigation Systems Diseño y Manejo de Sistemas de Riego

    Directory of Open Access Journals (Sweden)

    Eduardo A Holzapfel

    2009-12-01

    Full Text Available Irrigation systems should be a relevant agent to give solutions to the increasing demand of food, and to the development, sustainability and productivity of the agricultural sector. The design, managing, and operation of irrigation systems are crucial factors to achieve an efficient use of the water resources and the success in the production of crops and orchards. The aim of this paper is to analyze knowledge and investigations that enable to identify the principal criteria and processes that allow improving the design and managing of the irrigation systems, based on the basic concept that they facilitate to develop agriculture more efficient and sustainable. The design and managing of irrigation systems must have its base in criteria that are relevant, which implies to take into account agronomic, soil, hydraulic, economic, energetic, and environmental factors. The optimal design and managing of irrigation systems at farm level is a factor of the first importance for a rational use of water, economic development of the agriculture and its environmental sustainability.Los sistemas de riego deberían ser un agente relevante para dar soluciones a la demanda creciente de alimentos, y el desarrollo, sustentabilidad y productividad del sector agrícola. El diseño, manejo, y operación de los sistemas de riego son factores cruciales para lograr un uso eficiente de los recursos hídricos y el éxito en la producción de cultivos y frutales. El objetivo de este artículo fue analizar conocimientos e investigaciones que permitan identificar los principales criterios y procesos para mejorar el diseño y manejo de los sistemas de riego, basados en el concepto básico de desarrollar una agricultura más eficiente y sostenible. El diseño y manejo de los sistemas de riego deben tener su base en criterios que sean relevantes, lo que implica considerar aspectos agronómicos, de suelo, hidráulicos, económicos, energéticos, y ambientales. El diseño y

  15. Diseño de Herramientas Didácticas Enfocadas al Aprendizaje de Sistemas de Control Utilizando Instrumentación Virtual

    Directory of Open Access Journals (Sweden)

    J. Martínez

    2017-10-01

    Full Text Available Resumen: En este artículo se describe el diseño de tres herramientas didácticas enfocadas al aprendizaje de sistemas de control implementadas en el software de instrumentación virtual LabVIEW. Estas herramientas están dirigidas al análisis de estabilidad en sistemas de control, el diseño de compensadores utilizando la técnica del lugar geométrico de las raíces y el diseño de compensadores utilizando la técnica de respuesta en frecuencia con trazas de Bode. Cada una de estas herramientas didácticas cuenta con una interfaz gráfica amigable con el usuario. La ventaja de estas herramientas didácticas es que incluyen opciones para realizar simulación en las áreas de control que software especializado no tiene. Abstract: This paper describes the design of three didactic tools focused on learning of control systems implemented in LabVIEW virtual instruments software. These tools are dedicated to stability analysis in control systems, compensator design using root locus approach and Bode diagrams in the frequency domain. Each of them has a friendly interface with the user. The advantage of these didactic tools is the several options to simulate some characteristics referent to control in contrast with others teaching tools. Palabras clave: Estabilidad, Simulación de Sistemas, Educación en Control, Laboratorio Virtual, Keywords: Stability, simulation systems, control education, virtual laboratory

  16. Quality control of the NPL-CRC secondary standard system used for activimeters calibration at IPEN, Sao Paulo, Brazil;Ccontrole de qualidade do sistema padrao secundario NPL-CRC utilizado na calibracao de ativimetros no IPEN

    Energy Technology Data Exchange (ETDEWEB)

    Martins, Elaine W.; Potiens, Maria da P.A. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2009-07-01

    The objective of this study was to establish a quality control program to be applied at the NPL-CRC activimeter secondary standard system, used as reference to comparison in tests made with the work tertiary standard activimeter, Capintec basic CRC{sup R}-15BT, both belonging to the Calibration Laboratory of IPEN. The repeatability, reproducibility and the precision tests were performed using a sealed check source of {sup 133}Ba, from Amersham. It was made 70 series of 10 measurements to each activimeter, totaling 1400 measurements. Considering the variation limit of 5% to precision and reproducibility tests in the nuclear medicine services, recommended by the Brazilian standard CNEN-NN-3.05, the results observed in the behavior of the IPEN activimeter were satisfactory. (author)

  17. Emprego de sistemas robóticos na cirurgia cardiovascular Robotic systems in cardiovascular surgery

    Directory of Open Access Journals (Sweden)

    Roberto T. Sant'Anna

    2004-06-01

    Full Text Available O desenvolvimento de sistemas robóticos para cirurgia teve início na década de 80, por solicitação do exército norte-americano, que antevia a possibilidade de realizar operações em teatros de guerra, distantes do local onde estava o cirurgião. Entretanto, o primeiro uso em humanos só ocorreu anos mais tarde, numa ressecção transuretral de hiperplasia benigna de próstata. Cirurgiões cardíacos foram logo atraídos pela técnica robótica devido a possível aplicação com reduzido caráter invasivo; esperava-se menor trauma cirúrgico e redução da dor, morbidade, tempo de internação e custo do procedimento. Atualmente, de forma restrita e em casos selecionados, robôs são usados para revascularização do miocárdio e implante de marcapasso em cirurgias cardíacas totalmente endoscópicas; podendo também constituir apoio visual na retirada de artéria torácica interna, reconstrução valvar mitral e correção de defeitos congênitos. Utilizando o robô auxiliar AESOP® para controle do videotoracoscópio, com controle vocal por meio do sistema HERMES®, temos realizado dissecção da artéria torácica interna, implante de eletrodo ventricular esquerdo e abordagem de defeitos congênitos na cirurgia de correção. Apesar do entusiasmo científico inicial com a cirurgia robótica, ainda não existe evidência clara de superioridade desta técnica em relação à operação convencional, em termos de resultado. Isto se aplica também ao custo, pois o investimento inicial na aquisição de sistema cirúrgico completo (console, controle de vídeo, instrumental provavelmente é compensado após muitos procedimentos e longo intervalo. Mas é certo que a cirurgia robótica terá um lugar no futuro, possibilitando aprendizagem, telepresença e realização de procedimentos pouco invasivos, embora complexos.The development of robotic systems for surgery started in the 80's, motivated by the US army's need for surgical procedure in

  18. Analysis tools for simulation of hybrid systems; Herramientas de analisis para simulacion de sistemas hibridos

    Energy Technology Data Exchange (ETDEWEB)

    Guillen S, Omar; Mejia N, Fortino [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2005-07-01

    In order to facilitate and to simplify the development and analysis of a Hybrid System in reference to its design, construction, operation and maintenance, it turns out optimal to carry out the simulation of this one by means of software, with which a significant reduction in the investment costs is obtained. Given the mix of technology of electrical generation which is involved in a hybrid system, it is very important to have a tool integrated with specialized packages of calculation (software), that allow to carry out the simulation tasks of the operational functioning of these systems. Combined with the former, one must not fail to consider the operation characteristics, the facilities of the user, the clarity in the obtained results and the possibility of its validation with respect to prototypes orchestrated in field. Equally, it is necessary to consider the identification of tasks involved in relation to the place of installation of this electrification technology. At the moment, the hybrid systems technology still is in a stage of development in the international level, and exist important limitations as far as the methodology availability and engineering tools for the optimum design of these systems. With the development of this paper, it is intended to contribute to the advance of the technology and to count on own tools to solve the described series of problems. In this article are described the activities that more impact have in the design and development of hybrid systems, as well as the identification of variables, basic characteristics and form of validation of tools in the integration of a methodology for the simulation of these systems, facilitating their design and development. [Spanish] Para facilitar y simplificar el desarrollo y analisis de un Sistema Hibrido en lo que refiere a su diseno, construccion, operacion y mantenimiento, resulta optimo efectuar la simulacion de este por medio de un software, con lo que se obtiene una reduccien

  19. Sistema audiovisual para reconocimiento de comandos Audiovisual system for recognition of commands

    Directory of Open Access Journals (Sweden)

    Alexander Ceballos

    2011-08-01

    Full Text Available Se presenta el desarrollo de un sistema automático de reconocimiento audiovisual del habla enfocado en el reconocimiento de comandos. La representación del audio se realizó mediante los coeficientes cepstrales de Mel y las primeras dos derivadas temporales. Para la caracterización del vídeo se hizo seguimiento automático de características visuales de alto nivel a través de toda la secuencia. Para la inicialización automática del algoritmo se emplearon transformaciones de color y contornos activos con información de flujo del vector gradiente ("GVF snakes" sobre la región labial, mientras que para el seguimiento se usaron medidas de similitud entre vecindarios y restricciones morfológicas definidas en el estándar MPEG-4. Inicialmente, se presenta el diseño del sistema de reconocimiento automático del habla, empleando únicamente información de audio (ASR, mediante Modelos Ocultos de Markov (HMMs y un enfoque de palabra aislada; posteriormente, se muestra el diseño de los sistemas empleando únicamente características de vídeo (VSR, y empleando características de audio y vídeo combinadas (AVSR. Al final se comparan los resultados de los tres sistemas para una base de datos propia en español y francés, y se muestra la influencia del ruido acústico, mostrando que el sistema de AVSR es más robusto que ASR y VSR.We present the development of an automatic audiovisual speech recognition system focused on the recognition of commands. Signal audio representation was done using Mel cepstral coefficients and their first and second order time derivatives. In order to characterize the video signal, a set of high-level visual features was tracked throughout the sequences. Automatic initialization of the algorithm was performed using color transformations and active contour models based on Gradient Vector Flow (GVF Snakes on the lip region, whereas visual tracking used similarity measures across neighborhoods and morphological

  20. Igneous-sedimentary petroleum systems; Sistemas petroliferos igneo-sedimentares

    Energy Technology Data Exchange (ETDEWEB)

    Eiras, Jaime Fernandes [Para Univ., Belem, PA (Brazil)]. E-mail: eiras@ufpa.br; Wanderley Filho, Joaquim Ribeiro [PETROBRAS S.A., Manaus, AM (Brazil). Unidade de Negocios-BSOL]. E-mail: jwand@petrobras.com.br

    2003-07-01

    Igneous-sedimentary petroleum systems are mixed systems in which one or more essential elements or processes are related to magmatic events. Many examples worldwide are presented to show the importance of igneous rocks in the exploratory activities, as well as in the petroleum occurrence. Volcanic ash layers are of great importance in stratigraphic correlation and elucidation of structures, particularly when they occur in thick nonfossiliferous strata. They are also good indicators of turbidite deposition where turbidity currents are related to earthquakes generated by magmatic events. Unconventional reservoirs can be created by volcanic eruptions or intrusions, crystallization, reworking, and fracturing. Unaltered igneous rocks can seal vertically and laterally conventional reservoirs due to its excellent cap capacity. Abnormal thermal effect of igneous rocks can compensate the lack of overburden in shallow basins. Structural or combined traps can be formed due to intrusions, such as folded, faulted, and unconformity traps. Porosity can be either primary or secondary, or both. Primary porosity mainly consists of cavities produced by gas volatilization during eruption and cooling. Secondary porosity refers to those pores that result from hydrothermal alteration, recrystallization, and dissolution by groundwater, and tectonic stress. It includes intercrystalline pores formed by crystallization of various secondary minerals, dissolution pores, and tectonic fractures. New technologies of petroleum development and production are encouraging to search for oil and gas within igneous rocks, and new discoveries are expected. (author)

  1. A Moderação-Mediada do Sistema de Controle na Ambidestria

    Directory of Open Access Journals (Sweden)

    Valter da Silva Faia

    2017-12-01

    Full Text Available As demandas solicitadas pelos clientes conduzem os funcionários da linha de frente a buscar objetivos simultâneos que competem entre si por recursos. Funcionários que demonstram a capacidade de atender objetivos simultâneos são denominados ambidestros e são favorecidos quando há fatores organizacionais que os permitem e os encorajam a fazer seu próprio julgamento sobre como aplicar os recursos na conquista dos objetivos. Neste trabalho, ampliamos a discussão da ambidestria do nível organizacional para o nível individual e propomos que a ambidestria provisão de serviços e cross-/up-selling apresenta um efeito condicional ao explicar o desempenho. Especificamente, este efeito condicional significa que a ambidestria é mediadora do efeito da locomoção no desempenho, sendo esse efeito indireto moderado pelo sistema de controle de vendas. Fizemos uma pesquisa descritiva do tipo survey com 118 funcionários de laboratórios. Os achados mostraram que a orientação para locomoção se relaciona positivamente com o comportamento ambidestro do indivíduo; que a presença de um sistema de controle por resultado modera a relação locomoção-ambidestria, amplificando-a; e que essa relação moderada foi mediada pela ambidestria, quando explicando o desempenho.

  2. MODELOS DE SISTEMAS MRP CERRADOS INTEGRANDO INCERTIDUMBRE MODELOS DE SISTEMAS MRP FECHADOS INTEGRANDO INCERTEZA CLOSED MODELS OF MRP SYSTEMS CONSIDERING UNCERTAINTIES

    Directory of Open Access Journals (Sweden)

    Martín Dario Arango

    2012-12-01

    Full Text Available En este artículo se muestran cuatro modelos de los sistemas MRP cerrados con incertidumbre en los componentes de producción, como son: la capacidad necesaria de fabricación de cada producto, el tiempo de entrega y la disponibilidad del inventario. Dichos parámetros se tratan mediante la lógica difusa modelizando un sistema MRP cerrado determinista. Por tanto, se presentan inicialmente tres modelos de sistema MRP cerrado, donde cada uno considera de forma independiente la incertidumbre en capacidad, tiempo de entrega y disponibilidad de inventario. Igualmente, se presenta un cuarto modelo de sistema MRP cerrado que de forma conjunta analiza la incertidumbre en los tres parámetros mencionados. Cada uno de estos modelos es validado con información de una empresa del sector eléctrico colombiano, evaluando el costo total del plan de producción, nivel de inventarios, nivel de servicio y complejidad computacional.Neste artigo mostram-se quatro modelos dos sistemas MRP fechados com incerteza nos componentes de produção, como são: a capacidade necessária de fabricação da cada produto, o tempo de entrega e a disponibilidade do inventario. Ditos parâmetros tratam-se mediante a lógica difusa modelando um sistema MRP fechado determinista. Por tanto, apresentam-se inicialmente três modelos de sistema MRP fechado, onde a cada um considera de forma independente a incerteza em capacidade, tempo de entrega e disponibilidade de inventario. Igualmente, apresenta-se um quarto modelo de sistema MRP fechado que de forma conjunta analisa a incerteza nos três parâmetros mencionados. A cada um destes modelos é validado com informação de uma empresa do setor elétrico colombiano, avaliando o custo total do plano de produção, nível de estoques, nível de serviço e complexidade computacional.In this paper, we present four models of uncertainty in the MRP closed systems in the production components, such as: manufacturing capacity of each product

  3. Uma contribuição ao desenvolvimento de sistemas de controle via redes usando a margem de jitter

    OpenAIRE

    Santos, Tito Luís Maia

    2008-01-01

    Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro Tecnológico. Programa de Pós-Graduação em Engenharia Elétrica. Neste trabalho, são avaliadas algumas propriedades dos sistemas de controle via redes de comunicação industrial. Este problema se torna particularmente interessante uma vez que o ambiente de rede impõe restrições à determinação dos períodos de amostragem. Além desta restrição, em sistemas como estes, podem existir atrasos que variam ao longo do tempo. Os de...

  4. Environmental management system; El sistema de Gestion Medioambiental

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    An Environmental Management System was implemented in ANAV in 1999, including the two nuclear sites of the Asco and Vandellos II nuclear power plants. This implementation entailed formulation of the ANAV Environmental Policy, preparation of an Environmental Management Plan (PLAGMA) supported by the Environmental Aspects Manuals (MASMA) of each site and their operating procedures, modification of the organizational structure to create the Environment Unit, in charge of implementing the SIGEMA, and the Environment Committee, the governing body that reviews the results obtained and environmental goals to be achieved, and direct involvement of all the different ANAV organization in continuous improvement of the SIGEMA implementation. Special attention is paid to evolution of the environmental indicators, to communication and specific training in environmental issues, and to waste management and the different programs for increasing waste recycling and assessment, as well as to minimization programs. The article details the different approaches used to improve the environmental results in these last five years, which have allowed ANAV to maintain the ISO-14001 Certification since 1999. (Author)

  5. Marcapasso com sensor de contratilidade regulado pelas variações do sistema nervoso autônomo na miocardiopatia chagásica crônica Chagas heart disease and contractility rate responsive pacing controlled by autonomic nervous system variations

    Directory of Open Access Journals (Sweden)

    Oswaldo Tadeu Greco

    1998-12-01

    Full Text Available OBJETIVO: Analisar o desempenho da estimulação cardíaca artificial com marcapasso do tipo VVIR cujo sensor é regulado pelas variações do sistema nervoso autônomo em pacientes chagásicos com distúrbio no sistema de condução. MÉTODOS: Estudados 47 chagásicos, 28 do sexo masculino, com idades entre 24 e 68 anos, 36 tinham bloqueio atrioventricular (AV total; 8, bloqueio AV de 2º grau 2; e 3 doença do nódulo sinusal, e encontravam-se, de acordo com a NYHA, em classe I (4, II (15, III (16 e IV (12. Após o implante de marcapasso do tipo VVIR os pacientes foram acompanhados durante 12 meses. A resposta de freqüência foi registrada em gravações de Holter de 24h e divididos em dois grupos de acordo com a FC em repouso - grupo 1: >65bpm e grupo 2: PURPOSE: To analyse the performance of the artificial cardiac stimulation with the VVIR pacemaker whose sensor is adjusted by the variations of the autonomic nervous system in Chagas disease patients with deficiency of the conduction system. METHODS: Forty-seven Chagas disease patients have been studied, 28 male between 24 and 68 years old, 36 patients had complete AV block, 8 had 2nd degree AV block and the other 3 had sinus node disease. The patients were in class I (4, II (15, III (16 and IV (12 according to the NYHA. A 12-month-follow-up with constant clinical evaluations was carried out after pacemaker implantation. Patients were divided in 2 different groups according to the HR at rest - group 1: >65 beats per minute (bpm and group 2: <=65bpm, for a comparative study considering: 1 HR at stress test after the implantation; 2 arterial blood pressure at rest after the implantation and, 3 evaluation of the identified electrodes such as TIR-60-UP and others. RESULTS: The group 1 had greater HR at rest, and a smaller variation of values at stress than group 2. This shows that with this type of stimulation system it is possible to control each patient separately. The values of blood pressure

  6. Strategije održavanja tehničkih sistema / Technical system maintenance strategies

    Directory of Open Access Journals (Sweden)

    Petar Stanojević

    2003-11-01

    Full Text Available U ovom radu dat je pregled novih naučnih saznanja koja su dovela do promena u sadržaju strategija koje se mogu primeniti u sistemu održavanja tehničkih sistema. Analizirana je suština relevantnih strategija održavanja, prednosti nedostatci i efekti koje nosi njihova primena. / This paper gives a survey of recent scientific achievements which has brought changes into the strategies applicable in technical system maintenance systems. The essence of relevant maintenance strategies has been analyzed as well as the advantages disadvantages and effects of their application.

  7. Generating units in operation. National electrical system (Public service) 2002; Unidades generadoras en operacion. Sistema electrico nacional (Servicio publico) 2002

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-03-15

    The information regarding the generation effective capacity updated to December 31, 2002 is presented. A detailed description of the effective capacity by generation region, control area, generation type and federal entity is presented. Also graphs are shown with the energy balance of the National Electrical System of Comision Federal de Electricidad and Luz y Fuerza del Centro. [Spanish] Se presenta la informacion relativa a la capacidad efectiva de generacion actualizada al 31 de diciembre de 2002. Se hace una descripcion detallada de la capacidad efectiva por region de generacion, por area de control, por tipo de generacion y por entidad federativa. Tambien se presentan unas graficas con el balance de energia del Sistema Electrico Nacional de la Comision Federal de Electricidad y de Luz y Fuerza del Centro.

  8. Sistemas multi–modales de profundidad restringida Multi-modal systems of restricted depth

    OpenAIRE

    Manuel Sierra A.

    2008-01-01

    Se presentan como extensiones del cálculo proposicional clásico, la jerarquíade sistemas deductivos SMM–n con n > 1. SMM–n es el sistema multi–modalde profundidad–n. El sistema SMM–1 es el cálculo proposicional clásico. Elsistema SMM–(n + 1) puede ser visto como el resultado de aplicar la regla denecesariedad, asociada a los razonadores con suficiente capacidad de razona-miento, una vez a los teoremas del sistema SMM–n. El sistema SMM resultade la reunión de los sistemas de la jerarquía, y pu...

  9. Tradução e adaptação cultural do Asthma Control Scoring System (Sistema de Escore para Controle Abrangente da Asma para uso no Brasil The Asthma Control Scoring System: translation and cross-cultural adaptation for use in Brazil

    Directory of Open Access Journals (Sweden)

    Michelle Gonçalves de Souza Tavares

    2010-12-01

    Full Text Available OBJETIVO: Traduzir e adaptar culturalmente, para uso no Brasil, um instrumento específico de escore para o controle abrangente da asma, denominado Asthma Control Scoring System (ACSS. MÉTODOS: O protocolo incluiu dez etapas: autorização escrita do autor do ACSS; tradução do instrumento para a língua portuguesa do Brasil por três tradutores; análise e comparação das três versões por um comitê revisor; retradução literal para o inglês; revisão e harmonização da retradução; aprovação do autor do ACSS; revisão da tradução por especialistas; desdobramento cognitivo: teste da clareza, compreensão e aceitabilidade junto à população alvo (avaliação da tradução por 10 profissionais da área da saúde; segundo desdobramento cognitivo: revisão da nova versão por um segundo grupo de profissionais da área de saúde; e reconciliação e elaboração da versão final pelo comitê revisor. RESULTADOS: A versão do ACSS em português do Brasil apresentou clareza, compreensão e aceitabilidade. O instrumento foi considerado abrangente por englobar as manifestações clínicas, funcionais e inflamatórias da asma. CONCLUSÕES: Com o uso desta metodologia criteriosa empregada para a adaptação transcultural do ACSS, asseguramos sua adequação cultural para uso no Brasil. O uso desse instrumento poderá facilitar futuros estudos sobre o controle da asma.OBJECTIVE: The translation and cross-cultural adaptation of a specific scoring instrument for the comprehensive control of asthma, the Asthma Control Scoring System (ACSS, for use in Brazil. METHODS: The protocol included ten steps: acquisition of written permission from the author of the ACSS; translation of the instrument to Brazilian Portuguese, carried out by three separate translators; analysis and comparison of the three versions by a review committee; literal back-translation to English; review and harmonization of the back-translation; acquisition of the approval of the

  10. The System for Controlling Source and Special Nuclear Material at the Eurochemic Reprocessing Plant; Systeme de Controle des Matieres Nucleaires Brutes et Speciales a l'Usine de Traitement D'Eurochemic; Sistema kontrolya nad iskhodnym i spetsial'nym yadernym materialom na zavode evrokhimicheskoj kompanii po regeneratsii yadernogo topliva; Control de Materiales Nucleares Basicos y de Materiales Fisionables Especiales en la Planta de Regeneracion de la Eurochemic

    Energy Technology Data Exchange (ETDEWEB)

    Frenzel, W.; Schueller, W. [EUROCHEMIC, MOL (Belgium)

    1966-02-15

    Eurochemic is constructing a reprocessing plant near Mol (Belgium). The main characteristics of the plant and the different process steps are summarized. To maintain proper control of source and special nuclear material, the facilities of the company are divided into material balance areas. All transfers into and out of these areas are determined. Depending on their significance for the overall material balance, different precision requirements have been established according to a scale of significance which is briefly discussed. To adjust the book balance, physical inventories are periodically performed. The corresponding inventory procedures are outlined. The books used for nuclear materials accounting and the principles of the accounting system are summarized. (author) [French] La societe Eurochemic fait actuellement construire une usine de traitement chimique pres de Mol (Belgique). L'auteur indique succinctement les principales caracteristiques de l'usine et les differentes etapes du traitement. Pour assurer un controle correct des matieres nucleaires brutes et speciales, les installations d'Eurochemic sont divisees en secteurs de mesures. Tous les transferts entre ces secteurs de mesure sont determines quantitativement. Les mesures sont faites avec des degres de precision differents qui ont ete fixes en fonction de leur importance pour le bilan matieres general; les auteurs examinent brievement les criteres appliques a cette fin. Pour verifier le bilan, on procede periodiquement a des inventaires materiels. La facon dont sont menes ces inventaires est exposee dans ses grandes lignes. Les auteurs indiquent les livres utilises pour la comptabilite des matieres nucleaires et resument les principes du systeme comptable. (author) [Spanish] La compania Eurochemic esta construyendo una planta de regeneracion en Mol (Belgica). Los autores resumen las principales caracteristicas de la instalacion, y las distintas fases del proceso industrial. Para mantener un control

  11. SISTEMA INTENSIVO DE CRIAÇÃO DE PEIXE COM RECIRCULAÇÃO DE ÁGUA E CONTROLE DE TEMPERATURA VIA BOMBA DE CALOR DE DUPLO EFEITO TÉRMICO/ INTENSIVE FISH FARMING SYSTEM WITH WATER RECIRCULATION AND TEMPERATURE CONTROL BY A DOUBLE THERMAL EFFECT HEAT PUMP

    Directory of Open Access Journals (Sweden)

    R. A. Jordan

    2011-06-01

    Full Text Available Este trabalho apresenta os resultados de um sistema piloto de criação intensiva de peixes com recirculação de água, onde foram avaliadas as criações de tilápias e trutas. As tilápias e as trutas foram criadas em tanques com controle de temperatura da água, mantidas em 28 ± 1 ºC e 15 ± 1 ºC, respectivamente, empregando uma bomba de calor de duplo efeito térmico para provimento da demanda de aquecimento e resfriamento da água. Na criação de tilápias vermelhas e da variedade tailandesa a conversão alimentar aparente foi de 1,37:1 e 1,16:1, respectivamente. As trutas apresentaram boa adaptação ao confinamento, obtendo um ganho de peso de 500% em 18 semanas. A taxa diária de renovação de água nos tanques foi de 5%. A produtividade estimada para a criação intensiva de tilápias tailandesas foi de 150 t ha-1. O arranjo empregado apresentou resultados satisfatórios, bem como, a bomba de calor mostrou-se eficaz e confiável, entretanto, novas formas e tecnologias devem ser estudadas para a remoção da amônia gerada, que mostrou ser o maior gargalo deste tipo de sistema.Palavras chave: tilápia, truta, desempenho zootécnico, produtividade.

  12. Modelamento Multicorpo do Sistema Musculoesquelético/Multibody modeling of the Musculoskeletal System

    Directory of Open Access Journals (Sweden)

    José Elias Tomazini

    2012-12-01

    Full Text Available Vários sistemas podem ser tratados com formalismos multicorpos: mecanismos de máquinas em geral, robôs industriais e manipuladores, estruturas espaciais, motores e, ainda, sistemas biomecânicos. A locomoção ou marcha humana e animal podem ser estudadas através de formalismos multicorpos.Nos últimos anos, diversos trabalhos relacionados à biomecânica, e utilizando formalismos multicorpos, têm sido apresentados. Muitos estudos in vitro e in vivo têm sido realizados, objetivando descrever o potencial de sobrecarga nas articulações do corpo humano e de modelos animais. O objetivo desta revisão foi apresentar estudos envolvendo o modelamento matemático aplicado à bioengenharia, biomecânica e engenharia biomédica. Conclui-se que o modelamento matemático é uma ferramenta muito útil, barata e não invasiva que vem contribuir nos estudos envolvendo o sistema multicorpo mecânico e complexo, que é o corpo humano. Several systems can be treated with multibody formalisms: mechanisms of general machinery, industrial robots and manipulators, space structures, engines, and also biomechanical systems. The locomotion or human gait can be studied using multibody formalisms. Several studies related to biomechanics, and using multibody formalisms, have been presented in recent years. Many studies in vitro and in vivo have been carried out, aiming to describe the potential overload in the joints of the human body and animal models. The aim of this review was to present studies involving mathematical modeling applied to bioengineering, biomechanics and biomedical engineering. We have concluded that mathematical modeling is a useful, inexpensive and noninvasive tool which comes to contribute in studies involving the mechanical and complex multibody system which is the human body.

  13. Sistemas de tiempo real y sistemas distribuidos de tiempo real

    OpenAIRE

    Pesado, Patricia Mabel; Ramón, Hugo Dionisio; Boracchia, Marcos; Pasini, Ariel C.; De Vito, María Cecilia; Osella Massa, Germán Leandro; Estrebou, César Armando

    2006-01-01

    El proyecto de investigación y desarrollo en Sistemas de Software Distribuido, abarca aspectos que van desde los fundamentos del desarrollo (Técnicas de Ingeniería de Requerimientos, Metodologías de Gestión y Desarrollo de Proyectos, Técnicas de Planificación, Métricas, Normas de Calidad, Web-Systems) hasta la concepción de aplicaciones específicas orientadas a los procesos industriales (Sistemas de Planeamiento de Producción, Control Industrial en tiempo real), procesos de E-government (Voto...

  14. Sistema de salud de Perú The health system of Peru

    Directory of Open Access Journals (Sweden)

    Jacqueline Elizabeth Alcalde-Rabanal

    2011-01-01

    Full Text Available En este trabajo se describen las condiciones generales de salud de la población peruana y, con mayor detalle, el sistema peruano de salud: su estructura y cobertura, sus fuentes de financiamiento, los recursos físicos, materiales y humanos con los que cuenta, y las actividades de rectoría que en él se desarrollan. Asimismo se discute el estado en el que se encuentran la generación de información y la investigación, y la participación de los ciudadanos en la gestión y evaluación del sistema. El artículo concluye con una discusión de las innovaciones más recientes, dentro de las que destacan el Seguro Integral de Salud, el sistema de Empresas Prestadoras de Salud, el proceso de descentralización y los Comités Locales de Administración de Salud. El reto principal que enfrenta este sistema es ampliar la atención a la salud a poco más de 10% de la población que todavía no recibe servicios básicos.This paper describes the health conditions in Peru and, with greater detail, the Peruvian health system, including its structure and coverage, its financial sources, its physical, material and human resources, and its stewardship functions. It also discusses the activities developed in the information and research areas, as well as the participation of citizens in the operation and evaluation of the health system. The article concludes with a discussion of the most recent innovations, including the Comprehensive Health Insurance, the Health Care Enterprises system, the decentralization process and the Local Committees for Health Administration. The main challenge confronted by the Peruvian health system is the extension of coverage to more than I0% of the population presently lacking access to basic health care.

  15. Modelo de requisitos para sistemas embebidos: Model of requirements for embedded systems

    Directory of Open Access Journals (Sweden)

    Liliana González Palacio

    2008-07-01

    Full Text Available En este artículo se presenta un modelo de requisitos como apoyo para la construcción de sistemas embebidos. En la actualidad, las metodologías de Ingeniería de Requisitos propuestas para este dominio no establecen continuidad en su proceso de desarrollo, ya que poseen una fuerte orientación a la etapa de diseño y un énfasis más débil en la etapa de análisis. Además, dichas metodologías ofrecen pautas para tratar los requisitos luego de que han sido obtenidos, pero no proponen herramientas; como por ejemplo, un modelo de requisitos, para la obtención de estos. Este trabajo hace parte de un proyecto de investigación que tiene como objetivo proponer una metodología de Ingeniería de Requisitos (IR para el análisis de Sistemas Embebidos (SE. El modelo de requisitos propuesto y su forma de utilización se ilustran mediante un caso de aplicación consistente en la obtención de requisitos para un sistema de sensado de movimiento, embebido en un sistema de alarma para hogar.In this paper a model of requirements for supporting the construction of embedded systems is presented. Currently, the methodologies of Engineering of Requirements, in this field, do not let continuity in their development process, since they have a strong orientation to design stage and a weaker emphasis on the analysis stage. Furthermore, such methodologies provide guidelines for treating requirements after being obtained. However, they do not propose tools such as a model of requirements for obtaining them. This paper is the result of a research project which objective is to propose engineering of requirements methodology for embedded systems analysis. The model of proposed requirements and its use are illustrated through an application case consisting on obtaining requirements for a movement sensing system, embedded in a home alarm system.

  16. System programs design of motors; Sistema de programas de diseno de motores

    Energy Technology Data Exchange (ETDEWEB)

    Diaz Gonzalez Palomas, Oscar; Ciprian Avila, Fernando [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1988-12-31

    This paper describes the objective of creating the program system for induction motors design SIPRODIMO, its scope, its general characteristics, its structure and the results obtained with its application, as well as the service capacity developed by the Motors Area of the Instituto de Investigaciones Elctricas. [Espanol] En este articulo se describe el objetivo de crear el sistema de programas de diseno de motores de induccion, Siprodimo, su alcance, sus caracteristicas generales, su estructura y los resultados obtenidos con su aplicacion, asi como la capacidad de servicio desarrollada por el area de motores, del Instituto de Investigaciones Electricas.

  17. The Canadian health system and its financing El sistema de salud del Canadá y su financiamiento

    Directory of Open Access Journals (Sweden)

    Francisco Xavier Solórzano

    1997-07-01

    Full Text Available This work stems from a brief visit in 1993 to the Canadian health services as part of the PAHO International Health Training Program and the subsequent research, discussion, and analysis relating to that experience. By no means is this paper an exhaustive account of the system, but rather a close look at one of its aspects: financing. The main objective is to identify some of the virtues and limitations of a health system that is considered one of the most efficient, effective, and equitable in the world. Although the Canadian health system is financed by the federal government and the provincial governments, cost containment is a constant concern, since factors such as the growing use of highly complex technologies, hospital care, and long-term treatment of chronic and degenerative illnesses tend to increase costs. The progressive reduction in the federal budget has led to more efficient use of resources and the rationalization of installed capacity. At the same time, the relative simplicity of the system’s operation has permitted administrative costs to be kept low. In addition, alternative forms of care, such as local centers for community-based care, care at home and in special institutions to promote the maximum level of self-sufficiency, and the use of volunteers, have been devised in order to partially control cost increases. The people’s participation in planning and decision-making permit them to guide the development of the health services. Nevertheless, given the current situation, it is essential that the system be modified to prepare it for the challenges the twenty-first century will bring.El presente trabajo es el fruto de una breve visita realizada en 1993 a los servicios de salud de Canadá como parte del Programa de Formación en Salud Internacional de la OPS, y de un subsiguiente ejercicio de investigación, discusión y análisis. No pretende en modo alguno ser exhaustivo, sino más bien aproximarse a uno de los aspectos

  18. El sistema de salud del Canadá y su financiamiento The Canadian health system and its financing

    Directory of Open Access Journals (Sweden)

    Francisco Xavier Solórzano

    1997-03-01

    that experience. By no means is this paper an exhaustive account of the system, but rather a close look at one of its aspects: financing. The main objective is to identify some of the virtues and limitations of a health system that is considered one of the most efficient, effective, and equitable in the world. Although the Canadian health system is financed by the federal government and the provincial governments, cost containment is a constant concern, since factors such as the growing use of highly complex technologies, hospital care, and long-term treatment of chronic and degenerative illnesses tend to increase costs. The progressive reduction in the federal budget has lead to more efficient use of resources and the rationalization of installed capacity. At the same time, the relative simplicity of the system's operation has permitted administrative costs to be kept low. In addition, alternative forms of care, such as local centers for community-based care, care at home and in special institutions to promote the maximum level of self-ufficiency, and the use of volunteers, have been devised in order to partially control cost increases. The people's participation in planning and decision-making permit them to guide the development of the health services. Nevertheless, given the current situation, it is essential that the system be modified to prepare it for the challenges the twenty-first century will bring.

  19. El Sistema Penal como Instrumento de Control Social: El Papel del Encarcelamiento

    Directory of Open Access Journals (Sweden)

    Kelly Ribeiro Felix de Souza

    2015-12-01

    Full Text Available El objetivo de este estudio es analizar el sistema penal con el fin de encontrar elementos capaces de entenderlo como una técnica de control social de los considerados indeseables para la vida en sociedad. Adoptando como marco teórico la criminología crítica, más especificamente las contribuciones de autores como Massimo Pavarini y Michel Foucault, así como el método de investigación dialéctico, se busca, desde un enfoque jurídico y sociológico, indicar las transformaciones del poder disciplinario hasta su diseño actual, así como demostrar sus relaciones con uno de los principales instrumentos del poder punitivo hoy en día - la privación de libertad. En este sentido, parece que la selectividad del ejercicio del poder punitivo se muestra como un importante instrumento de control social de los excluidos.

  20. Sistemas ERP: características, custos e tendências ERP systems: characteristics, implementation cost, tendencies

    Directory of Open Access Journals (Sweden)

    Thais Cássia Cabral Padilha

    2005-04-01

    Full Text Available Muitas empresas estão adotando Sistemas ERP devido a várias razões, tais como: decepção com sistemas incompatíveis, incapacidade do Departamento de Tecnologia de Informação em realizar a integração entre os sistemas existentes atualmente na empresa e outros motivos que influenciam diretamente a competitividade da Empresa. Neste contexto, este artigo apresenta as principais características de Sistemas ERP, suas vantagens e desvantagens, bem como os custos envolvidos na sua implementação. Finalmente, as tendências e o futuro de Sistemas ERP são comentados.Several Companies are adopting ERP systems due to different reasons, such as: deceptions with incompatible systems, incapacity of Technology Information Department of doing integration among current systems, and other reasons which have direct influence in Company's competitiveness. In this context, this work presents the main ERP system characteristics, and the advantages, disadvantages and costs involved with its implementation. Besides this, the tendencies and the future for ERP systems are commented.

  1. La seguridad eléctrica y los sistemaLa sistemas eléctricos; Some considerations about electric security and electric systems working.

    Directory of Open Access Journals (Sweden)

    Miguel Castro Fernández

    2011-02-01

    Full Text Available El tema de la seguridad, visto con un enfoque integral y sistémico, no por estudiado deja de ser un temade importancia vital no sólo desde el punto de vista del funcionamiento como tal de un sistema dado apartir del uso de las nuevas tecnologías, sino también en la influencia que esas nuevas tecnologías tienensobre la vida humana. Si se parte de definir seguridad como el estado de riesgo aceptable o la actitudmental de las personas en una instalación, edificación o sistema dados, puede comprobarse lo dicho en elpárrafo anterior.El presente trabajo pretende abordar, de una forma general, los problemas relacionadoscon la seguridad de las personas, sean actores directos o no, en el marco de un entorno que puedeabarcar un sistema completo, una parte de él o una parte de una instalación o edificación: el entorno de laelectricidad. The security, it seen from the point of view of integral and systemic focus, do not be a real theme with highimportance both operation and use of new technologies and the influence of this technologies over humanbeen. If we start from to qualify security like acceptable risk or mental aptitude of people inside utilities,buildings or systems, it is possible to probe this consideration.The present paper, at general, pretend toexpose some problems related with the people security, they are been direct actors or not, inside oneenvironment which made incorporate one complete system, part of them or utility: electricity environments.

  2. Automatic control systems engineering

    International Nuclear Information System (INIS)

    Shin, Yun Gi

    2004-01-01

    This book gives descriptions of automatic control for electrical electronics, which indicates history of automatic control, Laplace transform, block diagram and signal flow diagram, electrometer, linearization of system, space of situation, state space analysis of electric system, sensor, hydro controlling system, stability, time response of linear dynamic system, conception of root locus, procedure to draw root locus, frequency response, and design of control system.

  3. El transecto Catahuasi-Tupe: zonas de producción, sistemas agropecuarios y control comunal

    Directory of Open Access Journals (Sweden)

    1986-01-01

    les communautés celles-ci seraient, en fait, les premières à exécuter les alternatives de solution qui seraient proposées par les propres comuneros. El transecto altoandino Catahuasi-Tupe, ubicado en la Cuenca del río Cañete, abarca nueve zonas de producción (ZP. En la parte baja, donde se ubica la comunidad de Catahuasi (1075 a 1400 m.s.n.m., la zona de producción (ZP I tiene una agricultura de menor riesgo y está pasando por una evolución del cultivo de frutales hacia el de la yuca, producto bien aceptado en los mercados de la Costa. La parte media del transecto (ZP III a VII, donde se ubican las comunidades de Aiza y Tupe (2350 a 3750 m.s.n.m., presenta una evolución menos dinámica en sus zonas de producción sus sistemas de cultivos, sometidos a mayores riesgos, muestran signos de regresión y crisis en su agricultura. La parte alta (ZP II, VIII y IX, ubicada entre los 3750 y 4800 m.s.n.m., se dedica mayormente a la ganadería de vacunos especializados en carne, caprinos y principalmente ovinos, pero su manejo técnico inadecuado está ocasionando problemas de erosión en el suelo. El control comunal, a lo largo del transecto, está restringido a la ración de agua (mita a cada regante y a la conservación de su infraestructura de riego, aunque en la parte alta (ZP IX, la comunidad designa su parcela al ganadero (punero y el monto de alquiler del paradero por año. Por otro lado, el recorte en el dominio vertical de los pisos ecológicos por parte de las comunidades, ha traído como consecuencia que se establezca entre las familias un intercambio a nivel agropecuario, comercial y de trabajo, en términos monetarios y de trueque (no monetario. Por último, los cuellos de botella detectados en sus Sistemas de Producción Agropecuarios, como una primera aproximación de un diagnóstico, nos indican que el trabajo a realizar, a corto y largo plazo, debe intervenir en forma interrelacionada con las entidades estatales, universidades y proyectos de

  4. Sistema de cálculo de indicadores para el mantenimiento. // Indicators for maintenance calculation system.

    Directory of Open Access Journals (Sweden)

    E. Hernández Cruz

    2001-10-01

    Full Text Available Hoy en día la mayoría de los procesos de la industria moderna y de las empresas, en general, se automatizan con el objetivode eliminar operaciones rutinarias y peligrosas para el hombre. Ello implica la implantación de una moderna tecnología:maquinarias productivas, herramientas, métodos de control de la producción y la organización, cambios en lainfraestructura de la empresa y personal con mayor calificación.En fin, un nuevo paradigma tecnológico y organizacional al que la empresa debe adaptar su filosofía de trabajo. De ello sederivan elevados niveles de producción en cortos plazos de tiempo, un mayor control de los procesos y desempeño de latecnología existente. Con lo que se requiere de una estricta organización y correcta aplicación de la labor de mantenimientoen la empresa.Este documento técnico representa la fundamentación teórica para la elaboración de un sistema informático que permitaevaluar la gestión de mantenimiento a través de indicadores. Se plantea una metodología para el establecimiento de unsistema de cálculo que permita automatizar este proceso, haciendo uso de los datos que se procesan en la base de datos delsistema MacWinÓ.Se incluyen temas relacionados con la gestión, evaluación, fiabilidad, organización y control del mantenimiento.Palabras claves: Fiabilidad, PDCA, estándares, mantenimiento, indicadores, automatización.___________________________________________________________________Abstract:Today in day most of processes in modern industry and companies, in general, are automated with the objective ofeliminating routine and dangerous man operations . It implies the installation of modern technology,: productivemachineries, tools, control production methods and organization, changes in the company and personal infrastructure withmore qualification.Shortly, a new technological and organizational paradigm to which the company should adapt its work philosophy. Highproduction levels in short

  5. LA PRUEBA DOCUMENTADA EN EL NUEVO SISTEMA DE JUSTICIA PENAL MEXICANO Documented proof in the new Mexican criminal justice system

    Directory of Open Access Journals (Sweden)

    Benavente Chorres Hesbert

    2010-01-01

    Full Text Available El presente estudio analiza los supuestos de prueba documentada regulados en aquellos códigos de las entidades federativas mexicanas que han adecuado el proceso penal al sistema acusatorio con tendencia adversarial. En ese sentido, se entiende por prueba documentada aquellas diligencias, principalmente declaraciones, realizadas durante la etapa de investigación que la ley otorga valor probatorio al no poder asistir el órgano de prueba a la audiencia del juicio oral por razones ajenas a su voluntad.This study analyzes the cases of the documented proof in those codes regulated the Mexican states that have appropriate criminal proceedings prone to adversarial system. In that sense, it is understood by those measures documented evidence, primarily statements made during the investigation stage that the law gives the probative value could not attend the court hearing to test the trial for reasons beyond their control.

  6. Solar system design to heating water for a biodigester; Diseno de un sistema solar de calentamiento de agua para un biodigestor

    Energy Technology Data Exchange (ETDEWEB)

    Gutierrez Castro, Lucia Monica; Quinto Diez, Pedro [Escuela Superior de Ingenieria Mecanica y Electrica, Instituto Politecnico Nacional, Mexico, D.F. (Mexico)]. E-mail: moni-80-lgc@hotmail.com; pqd510@hotmail.com; Tovar Galvez, Luis Raul [Centro Interdisciplinario de Investigaciones de Estudios sobre Medio Ambiente y Desarrollo, Instituto Politecnico Nacional, Mexico, D.F. (Mexico)]. E-mail: ltovarg@ipn.mx

    2010-11-15

    In this paper a Solar System of Heating Water (SSHW) to provide energy to a biodigester which produces biogas located in the Interdisciplinary Center of Investigation of Studies About Environment and Development (CIIEMAD) is assessed. This evaluation is made by means of the f Method considerating the extraterrestrial radiation, the earth radiation in the zone and the necessary energy to maintain at 55 degrees Celsius the mixture inside the biodigester. The data were introduced in the SOLAR program to calculate both the harnessing area m{sup 2} and the storage capacity in L/m{sup 2}. To guarantee the good performance of the SSHW, a control and monitoring system for the temperature of the mix inside the biodigester is proposed. It also controls the input and output temperature to the solar collectors, as well as the cost analysis which shows the savings of fuel of the SSHW with a conventional system to heating water. [Spanish] En este articulo se evalua un sistema solar de calentamiento de agua (SSCA) para proveer energia a un biodigestor que forma parte del sistema de generacion de biogas (SGB) ubicado en el Centro Interdisciplinario de Investigaciones de Estudios sobre Medio Ambiente y Desarrollo (CIIEMAD). Dicha evaluacion se realiza por medio del Metodo f de diseno que considera datos de radiacion terrestre, radiacion extraterrestre sobre la zona y la energia necesaria para mantener la temperatura de la mezcla dentro del biodigestor a 55 grados centigrados. Los datos fueron introducidos en el programa SOLAR para el calculo del area de captacion en m{sup 2} y la capacidad de almacenamiento en L/m{sup 2}. Para garantizar el buen funcionamiento del SSCA se propone un sistema de control y monitoreo de la temperatura de la mezcla dentro del biodigestor. Tambien se controla la temperatura de entrada y salida a los colectores solares, asi como el analisis de costos que muestra el ahorro de combustible del SSCA con un sistema convencional de calentamiento de agua.

  7. Responsabilização pelo controle de resultados no Sistema Único de Saúde no Brasil Results-oriented management and accountability in the Brazilian Unified Health System

    Directory of Open Access Journals (Sweden)

    Maria Arlete Duarte Araujo

    2010-03-01

    Full Text Available By examining normative instruments, the present article evaluates if the discourse of results-oriented management and accountability has become a reality within the Brazilian health care system following the reform started in the 1990s with the establishment of the Unified Health System (SUS. The analysis shows that there is, in fact, an effort aimed at the construction of results-oriented management, with the incorporation of many management tools (plans, reports, agendas, indicators, joint goals-setting. Also, the health care system has strived to adopt performance indicators and views evaluation as an essential management tool. However, difficulties are also evident, such as the absence of citizens in the construction of the system, due to an institutional design that only provides space for official bodies (Health Councils; accountability mechanisms that are limited to bureaucratic aspects typical of public administration, following the traditional accountability path of audit and controllership; no engagement of health care system users in the decision-making about health care policies and operating arrangements; and no evaluation of the efficacy and effectiveness of contracts, placing the current management systems far from results-oriented management. It is possible to state that the conditions for accountability are slowly being created; however, it is still not possible to foresee the consolidation of results-oriented management and accountability within the SUS.

  8. Combinando simulação e sistemas baseados em conhecimento para o projeto de sistemas avançados de manufatura Combining simulation and knowledge-based systems for advanced manufacturing system design

    Directory of Open Access Journals (Sweden)

    Denis Borenstein

    1998-08-01

    Full Text Available Este trabalho apresenta um sistema inteligente desenvolvido para verificar se uma determinada opção de projeto de um Sistema Avançado de Manufatura (SAM respeita os objetivos de projeto fixados pelo time de projetistas. Se um problema é encontrado, o sistema começa um ciclo de análise-diagnóstico-recomendação no sentido de diagnosticar a causa do problema, bem como, sugerir possíveis ações no sentido de melhorar a alternativa de projeto em relação ao objetivo não respeitado. Para que este ciclo seja realizado com sucesso, o sistema desenvolvido combina simulação e sistemas baseados em conhecimento, utilizando a experiência e o conhecimento adquiridos por especialistas durante prévios projetos de SAM. Um exemplo ilustra a eficácia do sistema computacional.This article describes a tandem knowledge-based system developed to verify whether a specific advanced manufacturing system (AMS scenario meets the design requirements defined by the design team. If a problem is found, the system starts an analysis-diagnosis-recommendation cycle in order to identify the possible cause(s of the design deficiency as well as to propose changes to improve the performance of the AMS scenario. For this cycle to be successful, the developed system combines simulation and knowledge-based systems, using the experience and knowledge acquired by specialists during previous AMS projects. A case study illustrates the effectiveness of the system.

  9. Compromissos e sistemas de controle na saúde pública: o caso dos médicos

    Directory of Open Access Journals (Sweden)

    Ivan Canan

    2016-01-01

    Full Text Available O ambiente organizacional na saúde pública é rico em situações e eventos que podem servir de fonte de mensagens e sinais sociais aos médicos para a elaboração de seus contratos psicológicos. Os contratos, pela perspectiva de Rousseau (1995, representam as crenças nas relações reciprocas de trocas entre os indivíduos e seus contratantes, incluindo aí os compromissos que assumem para com estes. Os médicos, como responsáveis pela atividade fim na medicina, tem grande amplitude na definição dos problemas de saúde dos pacientes e nas escolhas dos possíveis tratamentos. Para geri-los, as instituições que os contratam precisam de sistemas de controles que devem criar congruência entre as escolhas dos médicos e o que é considerado importante pela própria organização. Este trabalho enfoca esse desafio dos sistemas de controle, buscando relacionar o conteúdo existente na legislação de uma prefeitura e que pode ser entendido como fonte de mensagens de seu sistema de controle gerencial, com o conteúdo de falas sobre compromissos e percepção do uso do sistema de controle por médicos que para essa prefeitura trabalham. Trata-se de uma pesquisa exploratória, realizada em duas etapas: análise documental e análise empírica. Os dados da pesquisa, resguardadas suas limitações, sugerem que os sistemas de controle favorecem um ambiente de tensões dinâmicas onde os possíveis sinais externos, originados de outras instituições e instâncias, não se manifestam especificamente, mas reforçam a convergência para os assuntos expostos e tratados nos sistemas formais.

  10. Detection system qualification for direct measurement of thyroid internal contamination by radioiodine; Qualificazione di un sistema di rilevazione trasportabile per misure dirette di contaminazione interna di radioiodio

    Energy Technology Data Exchange (ETDEWEB)

    Tiberi, V.; Battisti, P.; Gualdrini, G. [ENEA, Centro Ricerche Ezio Clementel, Bologna (Italy). Dipt. Ambiente

    1999-07-01

    The work deals with a detection system qualification for direct measurements of thyroid internal contamination by radioiodine. The isotopes {sup 131}I and {sup 125}I are the most frequently used in nuclear medicine. Because of their volatility they are very dangerous for thyroid contamination by inhalation. The system has been projected to be easily and fast used and above all transportable where the control is necessary. These characteristic make it able to realise supervision programs of internal contamination by radioiodine. In fact due the very high control frequencies (each 15 days for {sup 131}I), these programs are usually very expensive and demanding when they are executed in external measurement laboratories. The following steps are described: devices presentation, calculation of energy and efficiency parameters, minimum detectable activity, time system reliability, best operative conditions in the measurements. At the end an application example of the system is reported. [Italian] Il presente lavoro consiste nella qualificazione di un sistema di rivelazione per misure dirette di contaminazione interna da radioiodio in tiroide, progettato per essere maneggevole, di semplice e rapido impiego e trasportabile sul luogo dove e' richiesta la misura. Il sistema e' stato studiato per la realizzazione di programmi di sorveglianza della contaminazione interna da radioiodio che, richiedendo frequenze di controllo elevate (quindicinali per lo {sup 131}I), sono estremamente impegnativi ed onerosi, soprattutto se i controlli vengono effettuati in centri di misura esterni. Dopo la determinazione dei parametri della calibrazione in energia ed efficienza, la minima attivita' rivelabile, l'affidabilita' del sistema nel tempo e le condizioni operative ottimali da adottare in sede di misura, viene verificata la piena affidabilita' del sistema in un programma di sorveglianza della contaminazione interna da radioiodio.

  11. El sistema de control interno como instrumento de gestión para la adecuada toma de decisiones en la empresa servicentro primavera srl. 2015 - 2016

    OpenAIRE

    Choez Machuca, Wilber Lebfred

    2017-01-01

    El presente trabajo tubo como problema de investigación conocer de qué manera el Sistema de Control Interno incide en una adecuada toma de decisiones en la empresa Servicentro Primavera SRL y el objetivo planteado fue: Conocer cómo incide el sistema de control interno en la adecuada toma de decisiones en Servicentro Primavera SRL., para lo cual se identificó el sistema de control interno actual en la empresa, es decir se revisó las políticas, prácticas, procedimientos en el proceso contable p...

  12. Computer system to manage information rigs by 3D electronic models; Sistema computacional para administrar la informacion de plataformas petroleras mediante modelos electronicos 3D

    Energy Technology Data Exchange (ETDEWEB)

    Vazquez Bustos, Jesus; Segura Ozuna, Victor Octavio [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2012-06-22

    The evolution and incorporation of new hardware technologies, as well as recent advances in computer systems have enabled the development of applications of computer aided design of most complete scope, such as those used for the design of industrial process plants. This article describes a software system developed to complement the capabilities of one of these systems for the design of process plants. A 3D electronic model is generated through the user interface of the design system that at the same time gives the user the ability to generate, publish, review and control the engineering document that are generated during the entire life cycle of a marine oil platform, a very particular type of industrial process plant. This way, the user obtains not only a tool for the design of an industrial plant, but also a system for managing information and engineering documents that are developed. This allows the user to do a more efficient job by putting at his disposal and in the same system, all documents and information required to perform his duty. [Spanish] La evolucion e incorporacion de nuevas tecnologias de hardware, junto con los avances recientes en sistemas de computo ha permitido el desarrollo de aplicaciones de interesante diseno de computo de mayor alcance, tales como los que se emplean en las plantas de procesos industriales. Este articulo describe un sistema de software desarrollado para complementar las capacidades de uno de estos sistemas para el diseno de proceso. Un modelo electronico se genera por medio de la interfaz de usuario del sistema de diseno, que al mismo tiempo da al usuario la capacidad para crear, publicar, revisar y controlar los documentos de ingenieria que se producen durante el ciclo de vida completo de una plataforma marina petrolera, un tipo muy particular de planta de proceso industrial. De este modo, el usuario no solo obtiene una herramienta para el diseno de una planta industrial, sino tambien un sistema para manejar informacion y

  13. Protótipo de um sistema de gerenciamento de protocolos de câncer colorretal Management system prototype of colorectal cancer protocols

    Directory of Open Access Journals (Sweden)

    Huei Diana Lee

    2011-03-01

    Full Text Available OBJETIVO: desenvolvimento de um protótipo de sistema de cadastro e controle de protocolos de Câncer Colorretal, com a finalidade de armazenar um conjunto abrangente de dados de forma estruturada para posterior aplicação de métodos de análise inteligente de dados. MATERIAL E MÉTODO: o protótipo foi construído em cinco etapas: análise do domínio de Câncer Colorretal, definição de requisitos básicos (operacionais e informacionais, projeto do sistema, construção do sistema usando tecnologias open source e avaliação do sistema com o apoio de especialistas. RESULTADOS E DISCUSSÃO: durante o desenvolvimento, o protótipo foi avaliado por especialistas quanto à estrutura do conjunto de dados, à coerência de organização das informações, à validade das funcionalidades implementadas e ao atendimento aos requisitos básicos definidos. CONCLUSÃO: de acordo com os especialistas usuários, o desenvolvimento do protótipo completou a primeira etapa do projeto de desenvolvimento de um sistema em nível de 100% de satisfação e, atualmente, está sendo aplicado em cadastros de dados reais. Na próxima etapa será consolidado e implantado o sistema completo, atendendo a requisitos de segurança com suporte a multiusuáriosOBJECTIVE: to develop a prototype of a Colorectal Cancer records management system, aiming to store an embracing structured dataset for later application of intelligent data analysis methods. MATERIAL AND METHOD: the prototype was developed in five stages: Colorectal Cancer domain analysis, definition of basic requirements (operational and informational, system design, system construction using open source technologies and system evaluation supported by domain experts. RESULTS AND DISCUSSION: during development, the prototype dataset structure, coherence of information structure, validity of functions implemented and the attendance to the basic requirements define, were evaluated by domain experts. CONCLUSION

  14. Normalization of the energy efficiency in pumping systems; Normalizacion de eficiencia energetica en sistemas de bombeo

    Energy Technology Data Exchange (ETDEWEB)

    Acosta Torres, R.A.; Buendia Dominguez, E.H. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1995-12-31

    The Instituto de Investigaciones Electricas (IIE), supporting the Comision Nacional para el Ahorro de Energia (CONAE) has prepared the preliminary project of the norm of energetic efficiency for pumping systems, specifically for the agricultural sector. This document has complied with the necessary formalities for the issue of a norm and is about to be published as a Mexican Official Norm of energetic efficiency. In this paper mention is made of the results in the analysis of the pumping systems in operation, the energy saving, as well as the economic evaluation that sustain the norm project, indicating besides the environmental impact that its implantation will have. [Espanol] El Instituto de Investigaciones Electricas (IIE) apoyando a la Comision Nacional para el Ahorro de Energia (CONAE) ha elaborado el anteproyecto de norma de eficiencia energetica en sistemas de bombeo, especificamente para el sector agricola. Dicho documento ha cumplido con los tramites necesarios para la emision de una norma, y esta proximo a publicarse como norma oficial mexicana de eficiencia energetica. En el presente articulo se mencionan los resultados del analisis de los sistemas de bombeo en operacion, los ahorros energeticos, asi como la evaluacion economica que sustenta el proyecto de norma, indicandose ademas el impacto ambiental que tendra la implantacion de la misma.

  15. Normalization of the energy efficiency in pumping systems; Normalizacion de eficiencia energetica en sistemas de bombeo

    Energy Technology Data Exchange (ETDEWEB)

    Acosta Torres, R A; Buendia Dominguez, E H [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1996-12-31

    The Instituto de Investigaciones Electricas (IIE), supporting the Comision Nacional para el Ahorro de Energia (CONAE) has prepared the preliminary project of the norm of energetic efficiency for pumping systems, specifically for the agricultural sector. This document has complied with the necessary formalities for the issue of a norm and is about to be published as a Mexican Official Norm of energetic efficiency. In this paper mention is made of the results in the analysis of the pumping systems in operation, the energy saving, as well as the economic evaluation that sustain the norm project, indicating besides the environmental impact that its implantation will have. [Espanol] El Instituto de Investigaciones Electricas (IIE) apoyando a la Comision Nacional para el Ahorro de Energia (CONAE) ha elaborado el anteproyecto de norma de eficiencia energetica en sistemas de bombeo, especificamente para el sector agricola. Dicho documento ha cumplido con los tramites necesarios para la emision de una norma, y esta proximo a publicarse como norma oficial mexicana de eficiencia energetica. En el presente articulo se mencionan los resultados del analisis de los sistemas de bombeo en operacion, los ahorros energeticos, asi como la evaluacion economica que sustenta el proyecto de norma, indicandose ademas el impacto ambiental que tendra la implantacion de la misma.

  16. Energy optimization in industrial drying systems; Optimizacion energetica en sistemas de secado industrial

    Energy Technology Data Exchange (ETDEWEB)

    Alarcon, Daniel; Ambriz, Juan Jose; Romero Paredes, Hernando [Universidad Autonoma Metropolitana-Iztapalapa, Mexico, D. F. (Mexico)

    1994-12-31

    The drying of products -meaning the extraction of water or excess humidity down to adequate levels for its conservation and final presentation- demands a large amount of energy, mainly from fuels of fossil origin. Nevertheless, from the standpoint of the energy efficiency, the burning of fuels at very high temperature for using them at a very low temperature, represents an astonishing energy waste, which can be clearly established by means of an energy and exergy balance of these drying installations. In this study the methodology for the energy analysis for industrial drying systems is presented and it is applied to different practical cases. The efficiency of the entire system is evaluated and the losses for each concept, in order to obtain the potential energy saving. [Espanol] El secado de productos, entendido como la extraccion de agua o humedad en exceso, hasta niveles adecuados para su conservacion o presentacion final, demanda una gran cantidad de energeticos, principalmente de origen fosil. No obstante, desde el punto de vista de la eficiencia energetica, el quemar combustible a muy alta temperatura para emplearlos a una muy baja, representa un dispendio energetico impresionante, lo cual puede ser claramente establecido mediante el balance energetico y exergetico de dichas instalaciones de secado. En el presente estudio se presenta la metodologia de analisis energetico de sistemas industriales de secado y se aplica a distintos casos practicos. Se evalua la eficiencia total del sistema y las perdidas por cada concepto con la finalidad de obtener los potenciales de ahorro de energia.

  17. Studies on the power systems stability; Estudios de estabilidad en sistemas de potencia

    Energy Technology Data Exchange (ETDEWEB)

    Inda Ruiz, Adrian; Calderon Guizar, Jorge Guillermo; Friaga Vargas, Jose Raul [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1987-12-31

    One of the everyday problems that the electric power systems (EPS), is related to the dynamic response of these in face of the occurrence of disturbs. The computer tool needed to perform studies of this kind in the current EPS, requires the efficient conjunction of advanced modeling, simulation and programming techniques to make its use practical and useful. In this article are presented the advances achieved by the Power Nets Analysis Department in the development of a digital package for the stability analysis of the electric power systems [Espanol] Uno de los problemas cotidianos que el ingeniero de potencia debe enfrentar tanto en la fase de planeacion como en la de operacion de los sistemas electricos de potencia (SEP) es el relacionado con la respuesta dinamica de estos ante la ocurrencia de disturbios. La herramienta computacional necesaria para realizar estudios de esta naturaleza en los actuales SEP requiere de la conjugacion eficiente de tecnicas avanzadas de modelacion, simulacion y programacion para hacer su empleo practico y util. En este articulo se presentan los avances logrados por el Departamento de Analisis de Redes en el desarrollo de un paquete digital para el analisis de estabilidad en los sistemas electricos de potencia.

  18. Sistema penal acusatorio en Veracruz/Adversarial criminal system in Veracruz

    Directory of Open Access Journals (Sweden)

    Jorge Alberto Pérez Tolentino (México

    2014-01-01

    Full Text Available El estudio y comprensión del nuevo Código de Procedimientos Penales de Veracruz resulta ineludible, en virtud de las nítidas diferencias existentes entre las figuras jurídicas que contiene el actual ordenamiento, en comparación con el anterior. Es preciso sistematizar, describir y analizar la estructura del sistema penal acusatorio, a efecto de estar en condiciones de evaluar y, en su caso, proponer las mejoras al sistema en cuestión. El contenido esquemático y sustancial del código, la visión y recepción que del mismo tienen los operadores jurídicos y la sociedad en general, son aspectos que cubre el presente documento. The study and understanding of the new Code of Criminal Procedure of Veracruz is unavoidable, by reason of the sharp differences between the legal concepts that contains the actual order, compared with the previous. Needs to be systematized, describe and analyze the structure of the adversarial criminal system, in order to be able to evaluate and, if necessary, propose improvements to the system in question. The schematic and substantial content of the code, viewing and welcome that the same have the legal practitioners and society in general, are aspects covered by herein.

  19. Potential of energy saving with photovoltaic systems; Potencialidad de ahorro de energia con sistemas fotovoltaicos

    Energy Technology Data Exchange (ETDEWEB)

    Guzman S, Eusebio; Bratu S, Neagu [Universidad Autonoma Metropolitana, Mexico, D. F. (Mexico)

    1998-12-31

    This paper presents an approach on the application of photovoltaic systems in energy saving. The problem of the electric energy demand in the coming years is analyzed and its consequences on the environment and on the energy reserves of conventional sources. A model of the electric circuit equivalent to a photovoltaic cell illustrates the behavior of the photovoltaic cell in function of the climatological conditions. The former in order to show some of the limiting factors in this type of generator. Also, the evolution of the applications of the photovoltaic systems and its forecasting in the installed capacity in the next 20 years, is described. [Espanol] En este trabajo se presenta un enfoque de la aplicacion de los sistemas fotovoltaicos en el ahorro de energia. Se plantea el problema del crecimiento de la demanda energetica en los proximos anos y sus consecuencias sobre el medio ambiente y las reservas de energia por fuentes convencionales. Un modelo del circuito electrico equivalente de una celda fotovoltaica ilustra el comportamiento del generador fotovoltaico en funcion de las condiciones climatologicas. Lo anterior con el fin de mostrar algunas limitantes de este tipo de generador. Tambien se describe la evolucion de las aplicaciones de los sistemas fotovoltaicos y el pronostico de la potencia instalada en los proximos 20 anos.

  20. Studies on the power systems stability; Estudios de estabilidad en sistemas de potencia

    Energy Technology Data Exchange (ETDEWEB)

    Inda Ruiz, Adrian; Calderon Guizar, Jorge Guillermo; Friaga Vargas, Jose Raul [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1986-12-31

    One of the everyday problems that the electric power systems (EPS), is related to the dynamic response of these in face of the occurrence of disturbs. The computer tool needed to perform studies of this kind in the current EPS, requires the efficient conjunction of advanced modeling, simulation and programming techniques to make its use practical and useful. In this article are presented the advances achieved by the Power Nets Analysis Department in the development of a digital package for the stability analysis of the electric power systems [Espanol] Uno de los problemas cotidianos que el ingeniero de potencia debe enfrentar tanto en la fase de planeacion como en la de operacion de los sistemas electricos de potencia (SEP) es el relacionado con la respuesta dinamica de estos ante la ocurrencia de disturbios. La herramienta computacional necesaria para realizar estudios de esta naturaleza en los actuales SEP requiere de la conjugacion eficiente de tecnicas avanzadas de modelacion, simulacion y programacion para hacer su empleo practico y util. En este articulo se presentan los avances logrados por el Departamento de Analisis de Redes en el desarrollo de un paquete digital para el analisis de estabilidad en los sistemas electricos de potencia.

  1. Sistema de salud de República Dominicana The health system of Dominican Republic

    Directory of Open Access Journals (Sweden)

    Magdalena Rathe

    2011-01-01

    Full Text Available En este trabajo se describen las condiciones de salud de la República Dominicana y, con mayor detalle, el sistema de salud dominicano, incluyendo su estructura y cobertura, sus fuentes de financiamiento, el gasto en salud, los recursos físicos, materiales y humanos de los que dispone, las tareas de rectoría que desarrolla el Ministerio de Salud Pública y la generación de información. También se discuten la participación de los usuarios en la operación y evaluación del sistema de salud y las más recientes innovaciones implementadas, dentro de las que destacan la nueva Ley General de Salud, la nueva Ley de Seguridad Social y el Plan Decenal de Salud.This paper describes the health conditions in Dominican Republic and the characteristics of the Dominican health system, including its structure and coverage, its financial sources, the health expenditure, the physical, material and human resources available, the stewardship functions developed by the Ministry of Public Health and the generation of health information. The participation of health care users in the operation and evaluation of the system and the most recent policy innovations, including the new General Health Law, the new Social Security Law and the Decennial Health Plan are also discussed.

  2. Potential of energy saving with photovoltaic systems; Potencialidad de ahorro de energia con sistemas fotovoltaicos

    Energy Technology Data Exchange (ETDEWEB)

    Guzman S, Eusebio; Bratu S, Neagu [Universidad Autonoma Metropolitana, Mexico, D. F. (Mexico)

    1999-12-31

    This paper presents an approach on the application of photovoltaic systems in energy saving. The problem of the electric energy demand in the coming years is analyzed and its consequences on the environment and on the energy reserves of conventional sources. A model of the electric circuit equivalent to a photovoltaic cell illustrates the behavior of the photovoltaic cell in function of the climatological conditions. The former in order to show some of the limiting factors in this type of generator. Also, the evolution of the applications of the photovoltaic systems and its forecasting in the installed capacity in the next 20 years, is described. [Espanol] En este trabajo se presenta un enfoque de la aplicacion de los sistemas fotovoltaicos en el ahorro de energia. Se plantea el problema del crecimiento de la demanda energetica en los proximos anos y sus consecuencias sobre el medio ambiente y las reservas de energia por fuentes convencionales. Un modelo del circuito electrico equivalente de una celda fotovoltaica ilustra el comportamiento del generador fotovoltaico en funcion de las condiciones climatologicas. Lo anterior con el fin de mostrar algunas limitantes de este tipo de generador. Tambien se describe la evolucion de las aplicaciones de los sistemas fotovoltaicos y el pronostico de la potencia instalada en los proximos 20 anos.

  3. Replacement of the level control of draining tanks MSRS and powered water heaters with the OVATION system in Asco NPP; Sustitucion del control del nivel de tanques de drenaje MSRS y calentadores de agua de alimentacion con el sistema ovation en CN Asco

    Energy Technology Data Exchange (ETDEWEB)

    Serrano Jimenez, J.

    2012-07-01

    The current MSR drains and heaters tanks level control is local control individual, pneumatic and without action from Control room. The system has level switches for the generation of alarms, isolations and shots of bombs. Single control room operators have level alarms, final race of valves of control and indication of temperature and pressure of some tanks.

  4. Precision digital control systems

    Science.gov (United States)

    Vyskub, V. G.; Rozov, B. S.; Savelev, V. I.

    This book is concerned with the characteristics of digital control systems of great accuracy. A classification of such systems is considered along with aspects of stabilization, programmable control applications, digital tracking systems and servomechanisms, and precision systems for the control of a scanning laser beam. Other topics explored are related to systems of proportional control, linear devices and methods for increasing precision, approaches for further decreasing the response time in the case of high-speed operation, possibilities for the implementation of a logical control law, and methods for the study of precision digital control systems. A description is presented of precision automatic control systems which make use of electronic computers, taking into account the existing possibilities for an employment of computers in automatic control systems, approaches and studies required for including a computer in such control systems, and an analysis of the structure of automatic control systems with computers. Attention is also given to functional blocks in the considered systems.

  5. DESENVOLVIMENTO DE UM SISTEMA WEB PARA ACESSO E CONTROLE DE ATIVIDADES COMPLEMENTARES EM CURSOS SUPERIORES

    Directory of Open Access Journals (Sweden)

    Highor de Souza Rizzi

    2017-03-01

    Full Text Available Este trabalho tem por objetivo apresentar o Sistema para Controle de Normas Complementares, desenvolvido para o núcleo de informática do Instituto Federal do Espírito Santo, campus de Alegre, com o intuito de digitalizar, cadastrar e gerenciar as atividades complementares exercidas pelos alunos do campus. Atualmente, este processo é feito manualmente, utilizando recursos exclusivamente físicos, sendo potencialmente vulneráveis à ações do meio. Recursos físicos, tais como papel, pastas, entre outros, são frágeis e estão sujeitos a perda por mal manuseio, ações do tempo e principalmente não podem ser acessados por mais de um individuo simultaneamente. A solução proposta dispõe de um modelo de software baseado na arquitetura cliente servidor, disponível na web, e contemplará metodologias e técnicas computacionais para suportar e usufruir dos mais recentes recursos informáticos disponíveis atualmente.

  6. BSF control system

    International Nuclear Information System (INIS)

    Irie, Y.; Ishii, K.; Ninomiya, S.; Sasaki, H.; Sakai, I.

    1982-08-01

    The booster synchrotron utilization facility (BSF) is a facility which utilizes the four fifths of available beam pulses from the KEK booster synchrotron. The BSF control system includes the beam line control, interactions with the PS central control room and the experimental facilities, and the access control system. A brief description of the various components in the control system is given. (author)

  7. Hidronefrosis prenatal en doble sistema excretor Prenatal hydronephrosis in double excretory system

    Directory of Open Access Journals (Sweden)

    Sandalio Durán Álvarez

    2007-12-01

    Full Text Available Con la introducción del ultrasonido materno-fetal en el seguimiento sistemático del embarazo normal se detectan anomalías congénitas en el 1 % de los fetos, el 20 % de las cuales corresponden al tracto urinario. Se realizó el estudio de recién nacidos y lactantes con hidronefrosis prenatal, cuyos ultrasonidos materno-fetales demostraron la presencia de un doble sistema excretor. Para este propósito todos los recién nacidos y lactantes con hidronefrosis detectada prenatalmente, y doble sistema excretor diagnosticado antes o después del nacimiento, fueron seguidos mediante ultrasonografía renal evolutiva, uretrocistografía miccional, gammagrafía estática o dinámica y, en algunos casos, mediante urograma excretor. Hallamos doble sistema excretor en 7 de los 182 pacientes (3,8 % con anormalidades del tracto urinario diagnosticadas antes del nacimiento. El diagnóstico fue prenatal solo en uno de los fetos (31 semanas de embarazo. La dilatación hidronefrótica fue ligera en dos fetos y grave en cinco. La hidronefrosis obedeció a diferentes causas. Se realizó nefrectomía polar superior en los casos de ectopia ureteral y de uréter superior obstruido, reimplantación en un ureterocele, y en otro se comprobó la ruptura espontánea mediante endoscopia. Los restantes pacientes se trataron sintomáticamente. La hidronefrosis detectada antes del nacimiento mediante ultrasonografía materno-fetal puede estar asociada a un doble sistema excretor. La dilatación hidronefrótica asociada a un doble sistema puede deberse a diferentes causas, y es necesario estudiar cuidadosa y sistemáticamente a estos niños y tratarlos adecuadamente, porque cada uno puede necesitar una conducta diferente.With the introduction of the maternofetal ultrasound in the systematic follow-up of normal pregnancy, congenital anomalies are detected in 1 % of the fetuses, 20 % of which correspond to the urinary tract. The newborns and infants with prenatal

  8. Blends of PHB/PEG: obtention of matrices for use as controlled drug release systems; Obtencao de blendas de PHB/PEG para matrizes de sistemas micro e nanoestruturados visando aplicacao em liberacao controlada de farmacos

    Energy Technology Data Exchange (ETDEWEB)

    Catoni, S.E.M.; Gomes, C.A.T.; Trindade, K.N.S.; Schneider, A.L.S.; Pezzin, A.P.T., E-mail: sara.elisamoreira@hotmail.co [Universidade da Regiao de Joinville (UNIVILLE), SC (Brazil); Soldi, V. [Universidade Federal de Santa Catarina (UFSC), Florianopolis, SC (Brazil)

    2010-07-01

    Different materials have been used in the development of micro-and nanostructured systems for drug release. In general, poly(3-hydroxybutyrate) (PHB) matrixes have high crystallinity degree, justifying its slow degradation. This feature makes the attack of enzymes more difficult. Thus, the surface modification with hydrophilic polymers such as poly(ethylene glycol) (PEG) has been investigated in order to obtain particles which are not recognized and captured by phagocytic cells after in vivo administration, staying for a longer in the systemic circulation. In this work, PHB/PEG films were prepared by casting in different proportions and characterized by XRD, DSC, SEM, GPC and TGA. The films presented high crystallinity degree and showed uniformity, except the 50/50 composition which showed the presence of two phases. The results revealed that increasing percentage of PEG, the Tm of PHB was decreased, the thermal stability was dramatically decreased and molecular weight of the samples was lower. (author)

  9. Photovoltaic systems interconnected to the electric network; Sistemas fotovoltaicos interconectados a la red electrica

    Energy Technology Data Exchange (ETDEWEB)

    Agredano Diaz, Jaime [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2007-06-15

    This presentation is about the project carried out in the State of Baja California, Mexico, more specifically in the region called Mexicalli. In the first part, there are given the reasons and the effects developed in this region due to the climatologic changes occurred every summer. In effect, there are described both the cause and the economic impact representing for those families that live around there, the summer's arrival. Next, it is shown the solution found by the State government participating the Mexican Electric Research Institute (IIE). Such participation is translated on a project that shows the feasibility of installing photovoltaic systems on households. Such systems are interconnected to the Mexico's Federal Commission of Electricity's (CFE) electric network. Next, it is given a description of both its methodology and its performance. Then, it is firstly given the positive effect in both issues economic and environmental and secondly the general parameters of the installation of the system on the 220 households of the complex Valle de las Misiones. In addition, it is mentioned the method that would be used in order to get a bigger impact as well as better coverage of the system. Finally, there are presented the project's sponsors, among there can be found: the Mexican Energy Secretariat (SENER), the CFE, the Mexican Energy Regulatory Commission (CRE), the Universidad Autonoma de Baja California (UABC), the IIE, the North American Development Bank (NADB), and the Government of the State of Baja California. [Spanish] Esta ponencia es acerca del proyecto de sistemas fotovoltaicos desarrollado en el Estado de Baja California, mas especificamente en Mexicalli. En la primera parte, se presentan las causas y las consecuencias que ocasionan los cambios climatologicos desarrollados en esta region durante el verano; es decir, se describe la razon y el impacto economico que representa para las familias de esta region la llegada del verano

  10. DISEÑO DE UN SISTEMA DIFUSO PARA VALORACIÓN DE APORTES EN SISTEMAS COLABORATIVOS FUZZY SYSTEM DESIGN FOR ASSESSMENT OF CONTRIBUTIONS IN COLLABORATIVE SYSTEMS

    Directory of Open Access Journals (Sweden)

    Jaime Echeverri

    2012-06-01

    Full Text Available Actualmente los consumidores no son pasivos, están altamente conectados y vinculados con las empresas. Por ello, algunas empresas aprovechan estas características para innovar productos a partir de los aportes de clientes. La co-creación como modelo colaborativo para la innovación se caracteriza por estar dividida en etapas relacionadas entre sí, con el fin de capturar apropiadamente los aportes de los clientes. La capacidad de valorar y clasificar los aportes de los agentes que participan en este proceso colaborativo es una tarea de crucial importancia para las organizaciones. El presente artículo propone un sistema difuso que permite valorar los aportes de los agentes que participan en forma colaborativa en la co-creación de productos y servicios.Now the customers are not passive, they are highly networked and connected with companies. Some companies take advantage of these features to innovate products from customer contributions. Co-creation like collaborative model to the innovation is characterized from being divided into interrelated stages in order to capture client's contributions in an appropriate way. The ability to assess and rank the contributions of the actors involved in this collaborative process is a crucial organizations task. The present paper proposes a fuzzy system that allows valuation for agent's contributions that participate in a collaborative way in products and services co-creation.

  11. Drenaje suplementario del sistema venoso superficial en colgajos pediculados Supplementary drainage of superficial venous system in pedicled flaps

    Directory of Open Access Journals (Sweden)

    A. Fernández García

    2012-06-01

    Full Text Available Los colgajos pediculados pueden sufrir edema y congestión debido a que su drenaje a trevés del sistema venoso superfical es imposible y el flujo hacia el sistema profundo a nivel del pedículo es precario. Esta situación suele evolucionar hacia la necrosis parcial o la pérdida total del colgajo en pocas horas. La apertura del sistema venoso superficial permite el drenaje adecuado de los tejidos transferidos y evita estas complicaciones. Este artículo analiza el papel de las anastomosis microquirúrgicas en el sistema venoso superficial de los colgajos pediculados. Esta técnica permite comunicar el sistema venoso superfical de los tejidos transferidos con el sistema venoso superficial del territorio que rodea al defecto. Presentamos los resultados obtenidos con esta técnica en colgajos de perforante en hélice, colgajos miocutáneos, colgajos neurocutáneos y colgajos fasciograsos volteados.The pedicled flaps can suffer edema and congestion due to the impossibility of drainage toward the superficial venous system and the precarious flow via the deep system at the level of the pedicle. The evolution of this situation is usually partial necrosis or total loss of the flap in a few hours. The opening of the venous superficial system achieves an appropriate drainage of the transfered tissues and avoids these complications. In this article we analyze the role of the microsurgical anastomosis at the level of the superficial venous system of pedicled flaps. This technique allows to communicate the superficial venous system of the transfered tissues with the superficial venous system of the territory around the defect. We report the results with this method in propeller perforator flaps, miocutaneous flaps, neurocutaneous flaps and adipofascial turn over flaps.

  12. Control system design method

    Science.gov (United States)

    Wilson, David G [Tijeras, NM; Robinett, III, Rush D.

    2012-02-21

    A control system design method and concomitant control system comprising representing a physical apparatus to be controlled as a Hamiltonian system, determining elements of the Hamiltonian system representation which are power generators, power dissipators, and power storage devices, analyzing stability and performance of the Hamiltonian system based on the results of the determining step and determining necessary and sufficient conditions for stability of the Hamiltonian system, creating a stable control system based on the results of the analyzing step, and employing the resulting control system to control the physical apparatus.

  13. FFTF control system experience

    International Nuclear Information System (INIS)

    Warrick, R.P.

    1981-01-01

    The FFTF control systems provide control equipment for safe and efficient operation of the plant. For convenience, these systems will be divided into three parts for discussions: (1) Plant Protection System (PPS); (2) Plant Control System (PCS); and (3) General Observations. Performance of each of these systems is discussed

  14. UN PATRÓN DE INTERACCIÓN ENTRE DIAGRAMAS DE ACTIVIDADES UML Y SISTEMAS WORKFLOW AN INTERACTION PATTERN BETWEEN UML ACTIVITY DIAGRAMS AND WORKFLOW SYSTEMS

    Directory of Open Access Journals (Sweden)

    Marta Silvia Tabares

    2008-12-01

    Full Text Available Actualmente en los ambientes de desarrollo de software hay un gran interés en buscar y desarrollar técnicas que puedan integrar los sistemas transaccionales con los flujos de trabajo que soportan los procesos del negocio de las organizaciones. Sin embargo, en la industria del software no es común encontrar técnicas o prácticas que faciliten el desarrollo de los modelos del sistema en función de los procesos del negocio. En este artículo se define un patrón de desarrollo que estandariza la interacción entre diagramas de actividades de UML 2.0, que representan las operaciones de un sistema, y procesos del negocio automatizados bajo tecnologías workflow. La trazabilidad de dicha interacción se mantiene por medio de modelos de trazabilidad que controlan la evolución de las operaciones del negocio y del sistema. Para mostrar la aplicación del patrón se desarrolla un caso de estudioIn software development environments there is a big interest to look and develop techniques that could integrate transactional systems with Workflow systems in order to support the business processes in organizations Nevertheless, in the software industry it is not common to find techniques or practices that facilitate the development of system models according to the business processes. In this article we define a development pattern to standardize the interaction between UML 2.0 activity diagrams, which represent the operations of a system, and the business processes automated by means of Workflow technologies. The traceability of the above mentioned interaction is supported by means of traceability models that control the evolution of both operations of the business and of the system. To show the application of the pattern a case study is developed.

  15. Guardando al futuro del Sistema Monetario Internazionale (Looking to the Future International Monetary System

    Directory of Open Access Journals (Sweden)

    Carlo D'Adda

    2012-04-01

    Full Text Available Questo articolo passa brevemente in rassegna diversi argomenti che riguardano il funzionamento del Sistema Monetario Internazionale dopo il 1971, quali cambi flessibili e cambi fissi, aree monetarie ottime, crescenti movimenti di capitali, volatilità dei cambi, crisi valutarie, disavanzo esterno degli Stati Uniti. Pur in assenza di un disegno a priori, la successione di questi problemi ha preparato la strada alla recente proposta di Mundell e Cooper per una moneta mondiale.Questa proposta non costituisce una semplice via d’uscita dalle odierne preoccupazioni. Nondimeno essa lascia intravedere la possibilità di un futuro migliore.     This article briefly reviews various issues concerning the functioning of the International Monetary System after 1971, such as flexible exchange rates and fixed exchange rates, optimal currency areas, increasing capital movements, exchange rate volatility, currency crises, external deficit of the United States. Even in the absence of an a priori design, the sequence of these problems has paved the way to the recent proposal of Mundell and Cooper for a world currency. This proposal is not a simple way out of today's concerns. Nevertheless, it suggests the possibility of a better future.  JEL Codes: F30, F33Keywords: Sistema Monetario Internazionale, Mundell, Cooper, moneta mondiale.

  16. INCIDENCIA DE LOS SISTEMAS DE CONTROL CONTABLE EN LA GESTION ADMINISTRATIVA DE LAS EMPRESAS PRIVADAS EN LA PROVINCIA DE SANTA ELENA AÑO 2014

    Directory of Open Access Journals (Sweden)

    Karina Bricio

    2016-04-01

    Full Text Available La presente investigaciones tiene como objetivo evaluar la incidencia de los  sistemas de control contable en la gestion administrativa de las emoresas privadas en la provincia de Santa Elena, el proyecto está enmarcado dentro del área de gestion administrativa, comunicación organizacional, control contable, informes financieros, control de registros contables, entre otros, se han venido desarrollando desde hace años los procesos administrativos de una manera manual y se han implementadi sistemas de control financieras, sin embargo en las empresas ecuatorianas la contabilidad se ha convertido en  una tecnica que se ocupa de registrar, clasificar y resumir las operaciones mercantiles de un negocio con el fin de interpretar sus resultados. Por consiguiente los gerentes o directores através de la contabilidad podrán orientarse sobre el curso que siguen sus negocios mediante sistemas o software contable. Los resultados podrán orientarse sobre el curso que siguen sus negocios y conocer las estabilidad y solvencia de la compañia, la corriente de cobros y pagos, las  tendencias de las ventas, costos y gastos  generales, con la técnica de observacion y mediantes entrevistas se determinó que en muchas empresas de provincia no hay sistemas de controles contables, el cual no manejan de forma eficiente los procesos contables ni administrativos, tambien se observó que se utilizó para el analisis correspondiente fue de tipo cuantitativo el cual se realizó encuestas a las personas que trabajan en las areas  administrativas de las empresas de la provincia, entre los resultados encontrados se mecniona lo siguiente: los  sistemas de control contable que utilizan actualmente las empresas son, el sistema Mónica, sistema Sagitario, el sistema Siscom,mennioaron tambien que la falta de sistemas de control contable retrasa la gestion administrativa de le empresa, necesitan cursos de capacitaciones y actualizaciones en temas de tributacion, sistemas

  17. Some future tendencies in the electric power systems; Algunas tendencias futuras en los sistemas electricos de potencia

    Energy Technology Data Exchange (ETDEWEB)

    Sarmiento Uruchurtu, Hector Gerardo [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1996-12-31

    This document describes the most important tendencies on energy generation transmission and utilization of the electric power systems. The underlining of these tendencies has the purpose of maintaining a constant alert on the possible technological advances that must be covered at medium and long term in the Coordination Analysis of Transmission Systems [Espanol] En el presente documento se describen las tendencias mas importantes sobre generacion, transmision y utilizacion de la energia, en cuanto a los sistemas electricos de potencia. El destacar estas tendencias tiene por objeto una alerta constante sobre los posibles desarrollos tecnologicos que se deben abordar a mediano y largo plazo dentro de la Coordinacion de Analisis de Sistemas de Transmision

  18. Some future tendencies in the electric power systems; Algunas tendencias futuras en los sistemas electricos de potencia

    Energy Technology Data Exchange (ETDEWEB)

    Sarmiento Uruchurtu, Hector Gerardo [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1995-12-31

    This document describes the most important tendencies on energy generation transmission and utilization of the electric power systems. The underlining of these tendencies has the purpose of maintaining a constant alert on the possible technological advances that must be covered at medium and long term in the Coordination Analysis of Transmission Systems [Espanol] En el presente documento se describen las tendencias mas importantes sobre generacion, transmision y utilizacion de la energia, en cuanto a los sistemas electricos de potencia. El destacar estas tendencias tiene por objeto una alerta constante sobre los posibles desarrollos tecnologicos que se deben abordar a mediano y largo plazo dentro de la Coordinacion de Analisis de Sistemas de Transmision

  19. Implementation of a quality assurance program for computerized treatment planning systems according to TRS 430; Implantacao de um programa de controle de qualidade para sistemas de planejamento de tratamento computadorizados de acordo com o TRS 430

    Energy Technology Data Exchange (ETDEWEB)

    Camargo, Priscilla Roberta Tavares Leite

    2006-07-01

    This work presents the guidelines and necessary tests tom implement a quality assurance program for Eclipse 7.3.10 from Varian at Hospital das Clinicas, Sao Paulo University School of Medicine - Brazil, in accordance with the new IAEA publication TRS 430. The recommended tests for the TRS 430 air mainly classified into acceptance tests, commissioning (dosimetric and non-dosimetric tests), and routine tests. The IAEA document's recommendations are being implemented at the hospital for two Varian linear accelerators - Clinac 600C e Clinac 2100C. The acceptance tests verified 'hardware', integration of network systems, data transfer and 'software' parameters. The results obtained are in a good agreement with the manufacturer's specifications. Measurements of absolute dose in several set-ups were made for the commissioning dosimetric tests. These data were compared to the absolute doses determined by the TPS. The great majority of the tests showed 90% to 80% of the analyzed data in acceptance levels, with a good agreement between the experimental data and the data determined by the TPS. Only settings with asymmetric fields presented significant discords, showing the need for a more detailed inquiry for these settings. The non-dosimetric commissioning tests have also presented excellent results, with virtually all the system tools and general performance in compliance with TRS 430. The acceptance criteria have been applied for a comparison between the values of MUs generated by TPS and the calculated manually ones. The beams have been characterized for Eclipse with data transferred from CadPlan and with data from recommissioning of accelerators, so for these tests it was found a difference of at least 3% for the conformal field shape for the data originated in the beams of recommissioning and at least 4% for the data proceeded from CadPlan. The tolerance level established by TRS 430 for this setting was 3%. (author)

  20. Implementation of a quality assurance program for computerized treatment planning systems according to TRS 430; Implantacao de um programa de controle de qualidade para sistemas de planejamento de tratamento computadorizados de acordo com o TRS 430

    Energy Technology Data Exchange (ETDEWEB)

    Camargo, Priscilla Roberta Tavares Leite

    2006-07-01

    This work presents the guidelines and necessary tests tom implement a quality assurance program for Eclipse 7.3.10 from Varian at Hospital das Clinicas, Sao Paulo University School of Medicine - Brazil, in accordance with the new IAEA publication TRS 430. The recommended tests for the TRS 430 air mainly classified into acceptance tests, commissioning (dosimetric and non-dosimetric tests), and routine tests. The IAEA document's recommendations are being implemented at the hospital for two Varian linear accelerators - Clinac 600C e Clinac 2100C. The acceptance tests verified 'hardware', integration of network systems, data transfer and 'software' parameters. The results obtained are in a good agreement with the manufacturer's specifications. Measurements of absolute dose in several set-ups were made for the commissioning dosimetric tests. These data were compared to the absolute doses determined by the TPS. The great majority of the tests showed 90% to 80% of the analyzed data in acceptance levels, with a good agreement between the experimental data and the data determined by the TPS. Only settings with asymmetric fields presented significant discords, showing the need for a more detailed inquiry for these settings. The non-dosimetric commissioning tests have also presented excellent results, with virtually all the system tools and general performance in compliance with TRS 430. The acceptance criteria have been applied for a comparison between the values of MUs generated by TPS and the calculated manually ones. The beams have been characterized for Eclipse with data transferred from CadPlan and with data from recommissioning of accelerators, so for these tests it was found a difference of at least 3% for the conformal field shape for the data originated in the beams of recommissioning and at least 4% for the data proceeded from CadPlan. The tolerance level established by TRS 430 for this setting was 3%. (author)

  1. Diseño y simulación de control avanzado para un sistema de refrigeración aplicado a la industria agrolimentaria

    OpenAIRE

    Aramburú Pardo Figueroa, Andrés

    2017-01-01

    La tesis elabora un sistema de control para un modelo matemático que represente el comportamiento dinámico de un sistema de refrigeración por compresión de vapor utilizado en procesos de conservación de productos en la industria agroalimentaria. El sistema de control se basará en los nuevos avances tecnológicos usados en refrigeradores (Smart Inverter, Digital Inverter), los cuales presentan ahorros en el consumo energético y será diseñado para ser usado en cámaras de refrigeración de mango. ...

  2. Cyclonic multiphase flow measurement system GLCC{copyright}1 for oil well capacity evaluation; Sistema de medicion de flujo multifasico mediante tecnologia ciclonica GLCC{copyright}1 para aforo de pozos petroleros

    Energy Technology Data Exchange (ETDEWEB)

    Godoy-Alcantar, J. M; Cervantes-Martinez, G; Cruz-Maya, J. A; Hernandez-Buenfil, M. A; Ramirez-Antonio, I [Instituto Mexicano del Petroleo, Mexico, D.F, (Mexico)]. E-mail: mgodoy@imp.mx

    2008-10-15

    This paper shows the development of a portable multiphase flow measurement system based in cyclonic separation technology GLCC{copyright}1. This system is aimed for oil well measurement and was developed in three phases; the first devoted to the geometric design of a cyclonic separator by means of designs sofware GLCCV7.8 and the selection of measurement instrumentation and flux control valves. In the second phase, the automatic control system was designed for the implementation of four control strategies each one related with a possible scenario of the well behavior. The third constitutes the integration of the measurement and control devices through a user interface aimed for visualization, information processing and system's operation and control. Experimental results in oil well measurements show the efficiency and workability of the integrated system. [Spanish] En el presente trabajo se muestra el desarrollo de un sistema portatil para la medicion de flujo multifasico, basado en la tecnologia de separacion ciclonica GLCC{copyright}1 y su utilizacion el aforo de pozos petroleros. El desarrollo del sistema se compone de tres fases, la primera se orienta hacia el diseno geometrico de un separador tipo ciclonico por medio del simulador GLCCV 7.8, asi como el dimensionamiento y la seleccion de los instrumentos de medicion y valvulas de control de flujo. En la segunda fase, se lleva a cabo la etapa de diseno del control automatico del sistema, el cual se fundamenta en el desarrollo e implantacion de cuatro estrategias de control basadas en el comportamiento dinamico de las variables de produccion del pozo; la tercera fase, la constituye el desarrollo de una interfaz para la integracion y operacion conjunta de los componentes de medicion y control del sistema, asi como de visualizacion, procesamiento y almacenamiento de la informacion. Se muestran los resultados experimentales de una prueba de medicion realizada en campo, las mediciones obtenidas muestran la

  3. Vapor recovery system in the gasolines commercialization; Sistema de recuperacion de vapores en la comercializacion de las gasolinas

    Energy Technology Data Exchange (ETDEWEB)

    Casas Barba, R.; Molina Gallegos, J.R. [Instituto Mexicano del Petroleo (IMP), Mexico, D. F. (Mexico)

    1995-12-31

    In the last years the studies performed with respect to the environmental pollution show that the ozone is one of the most problematic contaminants in the Metropolitan Zone of Mexico City (MZMC) and that the hydrocarbons are the main forerunners of it. The main source of hydrocarbon vapor emissions originates from the handling and distribution operations. In this paper a description is made of the involved stages in the commercialization of gasolines in the MZMC and a description is also made of the systems employed to control the emissions in the three stages of the fuels storage and distribution cycle and explains the degree the hydrocarbon emissions to the atmosphere will be reduced, once the recovery systems are installed in all of the involved stages. [Espanol] En los ultimos anos los estudios realizados con respecto a contaminacion ambiental reflejan que el ozono es uno de los contaminantes mas problematicos de la zona metropolitana de la ciudad de Mexico (ZMCM), y los hidrocarburos son los principales precursores de este. La principal fuente de emision de vapores de hidrocarburos proviene de las operaciones de manejo y distribucion de combustibles. En este articulo se hace una descripcion de las etapas involucradas en la comercializacion de las gasolinas en la ZMCM, se describen tambien los sistemas utilizados para controlar las emisiones en las tres etapas del ciclo de almacenamiento y distribucion de combustibles y se explica en que grado se reduciran las emisiones de hidrocarburos a la atmosfera, una vez que se instalen los sistemas de recuperacion en todas las etapas involucradas.

  4. Vapor recovery system in the gasolines commercialization; Sistema de recuperacion de vapores en la comercializacion de las gasolinas

    Energy Technology Data Exchange (ETDEWEB)

    Casas Barba, R; Molina Gallegos, J R [Instituto Mexicano del Petroleo (IMP), Mexico, D. F. (Mexico)

    1996-12-31

    In the last years the studies performed with respect to the environmental pollution show that the ozone is one of the most problematic contaminants in the Metropolitan Zone of Mexico City (MZMC) and that the hydrocarbons are the main forerunners of it. The main source of hydrocarbon vapor emissions originates from the handling and distribution operations. In this paper a description is made of the involved stages in the commercialization of gasolines in the MZMC and a description is also made of the systems employed to control the emissions in the three stages of the fuels storage and distribution cycle and explains the degree the hydrocarbon emissions to the atmosphere will be reduced, once the recovery systems are installed in all of the involved stages. [Espanol] En los ultimos anos los estudios realizados con respecto a contaminacion ambiental reflejan que el ozono es uno de los contaminantes mas problematicos de la zona metropolitana de la ciudad de Mexico (ZMCM), y los hidrocarburos son los principales precursores de este. La principal fuente de emision de vapores de hidrocarburos proviene de las operaciones de manejo y distribucion de combustibles. En este articulo se hace una descripcion de las etapas involucradas en la comercializacion de las gasolinas en la ZMCM, se describen tambien los sistemas utilizados para controlar las emisiones en las tres etapas del ciclo de almacenamiento y distribucion de combustibles y se explica en que grado se reduciran las emisiones de hidrocarburos a la atmosfera, una vez que se instalen los sistemas de recuperacion en todas las etapas involucradas.

  5. Paracoccidioidomicose sistêmica com envolvimento do sistema nervoso central Systemic paracoccidioidomycosis with central nervous system involvement

    Directory of Open Access Journals (Sweden)

    Antônio Luiz Wiener Pureza Duarte

    1999-08-01

    Full Text Available É relatado o caso de um paciente portador de paracoccidioidomicose sistêmica, com comprometimento oral e ganglionar regional e posterior envolvimento pulmonar. O paciente, tratado com drogas específicas(anfotericina B, itraconazol, sulfametoxazol + trimetoprim e acompanhado durante seis anos, foi ao óbito com extenso comprometimento do sistema nervoso centralA clinical case of a patient bearing systemic paracoccidioidomycosis with regional ganglionic and oral exposure and later pulmonary envolvement is presented. The patient was treated with especific drugs (amphotericin B, itraconazole, sulfamethoxazole-trimethoprim and followed throughout a 6-year period and eventually died showing an extensive envolvement of the central nervous system.

  6. Sistema experimental para el monitoreo de instalaciones de potencia haciendo uso de la Web; Experimental System for Power Installations Samples by Using the Web

    Directory of Open Access Journals (Sweden)

    Yoel R Rosales Hernández

    2011-02-01

    Full Text Available El artículo que se presenta describe una alternativa económica de sistema de adquisición de datos parael monitoreo de una instalación de potencia eléctrica trifásica. El sistema experimental está basado en unmicrocontrolador de Intel StrongARM SA-1110 de 32 bits con CPU RISC, una memoria flash de 16 Mbyte,una memoria SDRAM de 32 Mbyte y un controlador LAN Ethernet de 10/100 Mbps entre otros elementos.El mismo tiene instalado un sistema operativo Linux (kernel versión 2.4 y un servidor web thttpd. Através de un programa CGI se logra el muestreo, procesamiento y transmisión de la información recibidadesde un sistema trifásico de potencia y a partir de un protocolo HTTP se envía toda esta información aun grupo de clientes conectados a una red convencional de computadoras.  This work focuses on an economic alternative for developing a data acquisition system which monitors athree-phase power intalation. This experimental system is made up of an Intel StrongARM SA-1110 32-bitRISC microcontroller, a 16-Mbyte flash memory chip, a 32-MByte SDRAM chip, a 10/100 Mbps EthernetLAN controller with 10BASE-T, as well as other  hardware elements. The system has an embedded Linuxoperating system (kernel version 2.4, and a thttpd embedded web server. A CGI program was designed inorder to enable the sampling, processing and transmition of information received from the three-phasepower installation. To achieve this, a HTTP protocol was used in order to send all this information to agroup of clients connected to a conventional PC network.

  7. Measuring system of partial discharges with optical links and interphase for PC; Sistema de medicion de descargas parciales con enlaces opticos e interfase para PC

    Energy Technology Data Exchange (ETDEWEB)

    Pacheco Arteaga, Maria Jojutla Olimpia

    1999-07-01

    In this work a measuring system of partial discharges based on the traditional electrical detection technique is presented, but that unlike the existing systems it uses an optical link of communication. On one hand, the optical fiber avoids that the electromagnetic interference of the area affects the measurement and on the other hand, allows to make measurements online. With a personal computer and an application program the system is controlled, besides storing and displaying graphically the acquired data. As a result of this thesis the developed system obtains the magnitude and the phase of every partial discharge occurred during a time interval fixed or selected by the user, as well as the total number of discharges. In a graphical form it presents the magnitude and the phase of each discharge, in addition to the corresponding histogram of frequencies. [Spanish] En este trabajo se presenta un sistema de medicion de descargas parciales basado en la tecnica de deteccion electrica tradicional, pero que a diferencia de los sistemas existentes utiliza un enlace de comunicacion optico. Por un lado, la fibra optica evita que la interferencia electromagnetica del medio afecte la medicion y por otro, permite hacer mediciones en linea. Con una computadora personal y un programa de aplicacion se controla el sistema, ademas de almacenar y presentar graficamente la informacion adquirida. Como resultado de esta tesis el sistema desarrollado obtiene la magnitud y la fase de cada descarga parcial ocurrida durante un intervalo de tiempo fijo o seleccionado por el usuario, asi como el numero total de descargas. En forma grafica presenta la magnitud y la fase de cada descarga, ademas del histograma de frecuencias correspondiente.

  8. Wisdom Appliance Control System

    Science.gov (United States)

    Hendrick; Jheng, Jyun-Teng; Tsai, Chen-Chai; Liou, Jia-Wei; Wang, Zhi-Hao; Jong, Gwo-Jia

    2017-07-01

    Intelligent appliances wisdom involves security, home care, convenient and energy saving, but the home automation system is still one of the core unit, and also using micro-processing electronics technology to centralized and control the home electrical products and systems, such as: lighting, television, fan, air conditioning, stereo, it composed of front-controller systems and back-controller panels, user using front-controller to control command, and then through the back-controller to powered the device.

  9. SISTEMA C.– VIVIENDA COLECTIVA A LA CARTA / System C.- A la carte collective housing

    Directory of Open Access Journals (Sweden)

    Elena Corres Álvarez

    2012-05-01

    Full Text Available RESUMEN Sistema de montaje de viviendas en la que el habitante se convierte en parte indispensable de su diseño. Viviendas a la carta que ofrecen múltiples variables sobre las que decidir a la hora de ir completando el resultado definitivo. Las operaciones constructivas se plantean con carácter reversible, para poder realizar cambios a priori en el momento de la ocupación de la vivienda, y cambios a posteriori cuando ésta esté ocupada. El programa, la función, el tamaño, la orientación, la asociación, el equipamiento, el mobiliario... serán algunas de las variables sobre las que operar para completar el módulo habitacional. Los diversos y heterogéneos grupos habitacionales encontrarán en el Sistema C.– la posibilidad de habitar una vivienda según sus gustos y necesidades. Un sistema constructivo sencillo, mediante piezas y elementos fabricados en taller, modulados y codificados que serán montados mediante un equipo formado y especializado en una obra seca en todos sus componentes. Componentes elegidos y dispuestos para lograr la optimización de los recursos materiales, económicos y humanos, todo energéticamente dotado con la máxima calificación. SUMMARY A housing assembly system in which the resident becomes an indispensable factor of the design of their home. A la carte housing which offers the choice of multiple variables when completing the final result. The construction operations are proposed with a reversible character, so as to be able to make changes prior to, and after occupation. The programme, function, size, orientation, association, equipping, furnishing, etc., will be some of the variables to decide upon when finalizing the housing module. With System C, various diverse groups will discover the possibility of inhabiting a home tailored to their tastes and needs. A simple construction system, with workshop manufactured, modularized and coded parts and components that will all be dry assembled by a trained

  10. ESCOLHA DE SUB-AREA PARA IMPLANTAÇÃO DE SISTEMA DE CONTROLE SEMAFÓRICO CENTRALIZADO POR COMPUTADOR: UMA METODOLOGIA DE BAIXO CUSTO

    Directory of Open Access Journals (Sweden)

    João Bosco Furtado Arruda

    2010-04-01

    Full Text Available

    Este artigo reporta uma metodologia de baixo custo para definição de sub-áreas de sistemas de controle de semáforos centralizados por computador (sistemas CTA.A utilização da técnica DELPHI de geração de consenso com um grupo de especialistas em Transportes e Uso do Solo, atuando cotidianamente na área de estudo, em conjunto com ações simplificadoras do cálculo dos benefícios advindos do controle centralizado de semáforos, bem como a utilização tanto de conceitos de vinculação de interseções interdependentes operacionalmente quanto de dados secundários da área de estudo, servem de base à definição das interseções que deverão compor o sistema CTA naquela área.O artigo ilustra uma aplicação da metodologia reportada para a definição das interseções que irão compor a primeira etapa do sistema CTA ora em projeto na cidade de Fortaleza, Ceará.

     Abstract:

    This paper reports a simplified methodology built with the aim of choosing intersections which must form an Area Traffic Control (ATC system. The intersections which make up the ATC system are determined using a DELPHI technique - with a group of traffic engineering and land-use experts working daily in the study area as well as simplifying the process of working out tile benefits of synchronization for the intersections which comprise that area. Also, concepts of intersections linkage, in terms of operational interdependence, are used conjointly with secondary data gathered in the study area to find the intersections most appropriated for the ATC system under consideration. Finally, an application of the methodology for the case of Fortaleza, a two-million inhabitants city in North-eastern Brazil, is illustrated in the paper.

  11. Personal exposure control system

    International Nuclear Information System (INIS)

    Tanabe, Ken-ichi; Akashi, Michio

    1994-01-01

    Nuclear power stations are under strict radiation control. Exposure control for nuclear workers is the most important operation, and so carefully thought out measures are taken. This paper introduces Fuji Electric's personal exposure control system that meets strict exposure control and rationalizes control operations. The system has a merit that it can provide required information in an optimum form using the interconnection of a super minicomputer and exposure control facilities and realizes sophisticated exposure control operations. (author)

  12. Domogis: prototipo de un interfaz del sistema de control de un edificio integrado en un SIG

    OpenAIRE

    Álvarez, M.; Arquero, Á.; Martínez, E.; Río, O.

    2010-01-01

    This paper deals with of a the use of Geographical Information Systems (GIS) for domotic control. The foccus is put on the communication interface between the building control system (BCS) integrated in a GIS. For get this aim, the GIS of the Montegancedo Campus where is located the Facultad de infomatica of UPM and the creation of an interface is needed. The implemented interface in Microsoft C# language allows the control, monotorizing and management of the sensors data installated in the C...

  13. SISCI - SISTEMA PARA CONTROLE DE IRRIGAÇÃO ATRAVÉS DE DISPOSITIVOS CELULARES

    OpenAIRE

    Costa, Clayton Maciel; Fernandes, Islame Felipe; Almeida, Leandro Ismael

    2012-01-01

    O advento das tecnologias de informação, a expansão da Web e as modernas necessidades de mobilidade e compartilhamento de dados tiveram como resultado o investimento em sistemas adequados a dispositivos móveis, como o aparelho celular. Entretanto, utilização dessas tecnologias para otimização de processos pertinentes à área agrícola é pouco utilizada, e o desenvolvimento do projeto SisCI baseia-se nessa necessidade. Esse projeto trata-se do desenvolvimento de um sistema de tempo real para o ...

  14. Diseño de un sistema de control de procesos en una empresa textil

    OpenAIRE

    Pita Chávarri, Luis Alberto; Pita Chávarri, Luis Alberto

    2005-01-01

    El presente informe está basado en la experiencia desarrollada a través de los 23 años en que vengo laborando en una importante Empresa Textil, de los cuales los últimos 18 años me he desempeñado como Jefe del Departamento de Sistemas, y desde su creación he tenido la responsabilidad de organizado y proponer los proyectos de sistemas necesarios para efectuar una transición de procedimientos de trabajo manuales, hacia un manejo automatizado de la información en todas las áreas de la empresa, p...

  15. Procedure guide for the implementation of quality management program in products and services link with the utilization of tracers technology (TT) and Nucleonic Control System; Guia de procedimiento para la implantacion de programas de gestion de calidad en productos y servicios vinculados con la utilizacion de tecnologia de trazadores (TT) y sistema de control nucleonico (SCN)

    Energy Technology Data Exchange (ETDEWEB)

    Maggio Noldor, E [NOLDOR S.R.L., Buenos Aires (Argentina); Banados Perez, H [Instituto de Pesquizas Energia Nuclear, Sao Paulo (Brazil); Longo, G [A-Z Treinamiento Empresarial SC Ltda., Sao Paulo (Brazil); Kohnenkamp O, I [Comision Chilena de Energia Nuclear, La Reina (Chile); Rodriguez Cardona, R L [Agencia de Energia Nuclear, La Habana (Cuba); Sebastian Calvo, C [Instituto Peruano de Energia Nuclear, Lima (Peru); Vitart, X [Commissariat a l' Energie Atomique, Grenoble (France)

    1999-12-03

    This Guide was elaborated in the mark of the project RLA/8/024 ARCAL XLII 'Industrial Applications of the Tracer Technology and Nucleonic Control Systems'. Its objective is to establish the approaches for the implementation of quality management system in Tracer Techniques and Nucleonic Control System. The industry application of both techniques are increasing every day in Latin America, so it become in a necessity the implementation of quality control. This paper have 7 chapter. I. Introduction, II. General concepts, III. Proposal of the guide, IV. Verification process about the adhesion all the countries to the quality system; V. Requirement of the system; VI. Term and levels of implementation; VII. Glossary.

  16. The protection system to Brazilian Nuclear Program; O sistema de protecao ao Programa Nuclear Brasileiro

    Energy Technology Data Exchange (ETDEWEB)

    Andreuzza, Mario Giussepp Santezzi Bertottelli [Secretaria de Assuntos Estrategicos (SAE), Brasilia, DF (Brazil)

    1997-12-31

    The Sistema de Protecao ao Programa Nuclear Brasileiro-SIPRON (Protection System to Brazilian Nuclear Program) was established in 1980. It is intended to accomplish in only one system, all the actions related to security and protection for Nuclear Facilities in Brazil. The author presents in detail the protection system SIPRON, describing the system structure and organization, the functions and obligations of the system involved main organizations, as well as, the system operation and behaviour during an postulated occurrence of a nuclear emergency. It is also described an Exercise that happened in June of 1997 at the Nuclear Power Plant (NPP) Angra I, after two simulated tests in December of 1996 and April of 1997. The NPP Angra I Emergency Plan Exercise was a good opportunity to test the SIPRON structure and preparedness program. It was verified, included by International Atomic Energy Agency observers, the system involved organizations effectiveness and the procedures efficacy to protect the public and the environmental. Finally, it is shown the SIPRON activities of routine, the system obstacles and the expected future performances. (author) 3 refs., 3 figs.

  17. Sistemas de vigilancia de la salud pública: no pidamos peras al olmo Public health surveillance systems: let's not ask for the impossible

    Directory of Open Access Journals (Sweden)

    S. de Mateo

    2003-07-01

    Full Text Available La publicación del Decreto por el que se creó la Red Nacional de Vigilancia Epidemiológica, hace ya siete años, da pie para reflexionar sobre los sistemas de vigilancia de la salud pública en nuestro país e incidir en aquellos aspectos que facilitan o impiden que estos sistemas cumplan con su objetivo fundamental de proporcionar una información que sirva para facilitar el control de las enfermedades. Muchas de las situaciones vividas en el ámbito de la salud en estos últimos años, calificadas de «crisis sanitarias» por los medios de comunicación, han sido consideradas como riesgos inaceptables por la población, que los sistemas sanitarios deberían haber evitado y, entre los fallos evidenciados, siempre se alude a defectos de los sistemas de vigilancia. Algunos de estos defectos provienen de las propias limitaciones de los instrumentos utilizados para la medición y clasificación de los problemas de salud, pero también existen otros derivados de una concepción no adecuada de la vigilancia y que impiden valorar el verdadero impacto de los problemas de salud. Comentar unos y otros no solucionará los problemas de la vigilancia, pero sí puede servir para que muchas personas no sigan pidiendo a nuestros sistemas de vigilancia aquello que no pueden ofrecer.The publication of the Decree creating the National Epidemiological Surveillance Network, 7 years ago now, invites us to reflect on public health surveillance systems in our country and to highlight those aspects that help or obstruct these systems in meeting their basic objective of providing information that can be used to facilitate disease control. Many of the events that have taken place in the health arena in recent years, labeled as «health crises» by the communications media, have been considered by the population as unacceptable risks that the health system should have avoided; defects in surveillance systems are one of the errors always mentioned in this respect. Some

  18. Methodology for the location diagnosis of electrical faults in electric power systems; Metodologia para el diagnostico de ubicacion de fallas en sistema electricos de potencia

    Energy Technology Data Exchange (ETDEWEB)

    Rosas Molina, Ricardo

    2008-08-15

    The constant growth of the Electric Power Systems derived from the increase in the world-wide demand of energy, has brought as a consequence a greater complexity in the operation and control of the power nets. One of the most affected tasks by this situation is the operation of electrical systems against the presence of faults, where the first task to realize is, on the part of the operational personnel of the network, the rapid fault site location within the system. In the present paper the problem of the diagnose location of electrical faults in power systems is approached, from the point of view of the operators of the energy control centers of an electric company. The objective of this thesis work is to describe a methodology of operational analysis of protections, as a bases for the development of a system of diagnosis systems for faults location, that allows to consider the possible fault sites within the system as well as a justification of the operation of protections in face of a disturbance as a support to the operators of the Energy Control centers. The methodology is designed to use different information types, discreet, continuous and controls. Nevertheless, in the development of the present stage of the proposed methodology use is made exclusively of the discreet information of the conditions of breakers and operation of relays, as well as of the connectivity of the network elements. The analysis methodology consists in determining the network elements where the fault could have occurred, using the protections coverage areas associated to the operated circuit breakers. Later, these fault alternatives become ordained in descendent form of possibility using classification indexes and analyses based on fuzzy logic. [Spanish] El constante crecimiento de los Sistemas Electricos de Potencia derivado del incremento en la demanda energetica mundial, ha traido como consecuencia una mayor complejidad en la operacion y control de las redes electricas. Una de las

  19. El capital humano en el sistema de precios Human capital in the price system

    Directory of Open Access Journals (Sweden)

    Cuevas Homero

    1996-06-01

    Full Text Available Este ensayo explora algunas implicaciones fundamentales de la introducción del capital humano en un sistema de equilibrio general de precios de producción. En particular, las implicaciones sobre las determinación de los salarios, los agregados, la homogeneidad del modelo de trabajo, las proporciones capital trabajo, la tasa natural del beneficio y las fluctuaciones de los precios de equilibrio.This essay explores some fundamental implications of the introduction of human capital in a system of general equilibrium of prices of production. In particular, the implications concerning the determination of wages, the aggregates, the homogenei ty of labor, the capital-labor ratio, the natural rate of profit and the fluctuations of equilibrium prices.

  20. Substations grounding systems design; Diseno de sistemas de conexion a tierra en subestaciones

    Energy Technology Data Exchange (ETDEWEB)

    Velazquez Sanchez, Raul [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1987-12-31

    The grounding systems have been the object of a great number of analytical and experimental studies in the past 15 years, that have given rise to research reports on the several aspects involved in this technique. In this work are briefly reviewed various aspects that is necessary to take into account for its design, analysis and put in operation. [Espanol] Los sistemas de conexion a tierra han sido objeto de gran cantidad de estudios analiticos y experimentales en los pasados quince anos, que han dado origen a informes de investigacion sobre los diversos aspectos que involucra esta tecnica. En este trabajo se revisan brevemente diversos aspectos que es necesario considerar para su diseno, analisis y puesta en operacion.

  1. Substations grounding systems design; Diseno de sistemas de conexion a tierra en subestaciones

    Energy Technology Data Exchange (ETDEWEB)

    Velazquez Sanchez, Raul [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1986-12-31

    The grounding systems have been the object of a great number of analytical and experimental studies in the past 15 years, that have given rise to research reports on the several aspects involved in this technique. In this work are briefly reviewed various aspects that is necessary to take into account for its design, analysis and put in operation. [Espanol] Los sistemas de conexion a tierra han sido objeto de gran cantidad de estudios analiticos y experimentales en los pasados quince anos, que han dado origen a informes de investigacion sobre los diversos aspectos que involucra esta tecnica. En este trabajo se revisan brevemente diversos aspectos que es necesario considerar para su diseno, analisis y puesta en operacion.

  2. The remote control system

    International Nuclear Information System (INIS)

    Jansweijer, P.P.M.

    1988-01-01

    The remote-control system is applied in order to control various signals in the car of the spectrometer at distance. The construction (hardware and software) as well as the operation of the system is described. (author). 20 figs

  3. Control and automation systems

    International Nuclear Information System (INIS)

    Schmidt, R.; Zillich, H.

    1986-01-01

    A survey is given of the development of control and automation systems for energy uses. General remarks about control and automation schemes are followed by a description of modern process control systems along with process control processes as such. After discussing the particular process control requirements of nuclear power plants the paper deals with the reliability and availability of process control systems and refers to computerized simulation processes. The subsequent paragraphs are dedicated to descriptions of the operating floor, ergonomic conditions, existing systems, flue gas desulfurization systems, the electromagnetic influences on digital circuits as well as of light wave uses. (HAG) [de

  4. Sostenibilidad de sistemas agrícolas Sustainability of farming systems

    Directory of Open Access Journals (Sweden)

    Leiva Fabio R.

    1998-12-01

    Full Text Available Las actividades agrícolas pueden tener impactos negativos sobre el ambiente, con efectos dentro y fuera de los predios. El presente artículo pretende contribuir al avance de la agricultura sostenible con énfasis en países en vías de desarrollo. Se revisan y analizan los conceptos de sostenibilidad y agricultura sostenible, incluyendo los diferentes puntos de vista en el debate sobre sostenibilidad'. El artículo examina los impactos ambientales debidos a las actividades agrícolas, destacando la importancia de fortalecer la investigación, con publicación de resultados, sobre la relación agricultura y medio ambiente. La complejidad de los factores que determinan la sostenibilidad agrícola exige una concepción de sistemas, integradora, participativa y holística. El uso de indicadores tiene un gran potencial en la evaluación de la sostenibilidad de sistemas productivos. La práctica de agricultura sostenible requiere tener en cuenta las condiciones ambientales, sociales y económicas en las cuales
    se desenvuelve la agricultura.Farming activities have the potential to affect the farming system itself and the offfarm environment. This paper attempts to contribute to the development of sustainable agriculture with emphasis in developing countries. The concepts of sustainability and sustainable agriculture are reviewed and discussed, including the different viewpoints in the sustainability debate. Environmental impacts due to farming activities are examined emphasising the need of promoting further research and publication of findings on the links between environment and agriculture. The complexity of the factors that determine farming sustainability requires
    a systematic, holistic, participative and integrated approach. Indicators are likely to contribute to the development of sustainable farming systems. Understanding environmental, social and economic circumstances is required to promote sustainability.

  5. Desarrollo e implementación de un sistema APPCC Sistema de Análisis de Peligros y Puntos de Control Crítico en una industria de fabricación de mermelada de fresa

    OpenAIRE

    Meneses González, Isabel

    2012-01-01

    Realiza un estudio de la importancia del Sistema de Análisis de Peligros y Puntos de Control Crítico en la industria alimentaria, se detallan las características principales y las etapas para la implantación del sistema APPCC. Estudia el proceso de fabricación de mermelada, las materias primas involucradas, así como su importancia en el proceso y los defectos que pueden surgir durante la elaboración. Por último, se realiza la implantación detallada de todas las etapas del siste...

  6. ISABELLE control system

    International Nuclear Information System (INIS)

    Humphrey, J.W.; Frankel, R.S.; Niederer, J.A.

    1980-01-01

    Design principles for the Brookhaven ISABELLE control intersecting storage ring accelerator are described. Principal features include a locally networked console and control computer complex, a system wide process data highway, and intelligent local device controllers. Progress to date is summarized

  7. Sistema de Gestión y control de préstamo de libros en bibliotecas para teléfonos móviles Android

    OpenAIRE

    Fombellida Moreno, Javier

    2012-01-01

    El objetivo de este proyecto es desarrollar un sistema de control y gestión de préstamos mediante dispositivos móviles mediante la creación de un servicio web, el cuál es el encargado de controlar todo el sistema. El problema que este proyecto persigue, es modernizar los sistemas de préstamos tradicionales, de forma que un usuario pueda auto-prestarse un libro en una biblioteca con un dispositivo móvil. A la hora de desarrollar este proyecto se ha realizado un estudio extendido de las tecnolo...

  8. El Juez en el neoconstitucionalismo y su papel en el sistema de control difuso de constitucionalidad en Colombia

    Directory of Open Access Journals (Sweden)

    Ingrid Regina Petro González

    2016-07-01

    Full Text Available Resumen El presente ensayo tiene un enfoque de investigación cualitativo y un alcance descriptivo, por ello, la metodología utilizada para su construcción corresponde a la revisión documental o bibliográfica que permitiese analizar el papel de los jueces en el control difuso de constitucionalidad, teniendo en cuenta el marco del neconstitucionalismo colombiano. El principal hallazgo obtenido es que el papel de los jueces en un ordenamiento jurídico no debe sobreentenderse como el cumplimiento de funcio- nes mecánicas y prestablecidas, sino que debe obedecer al contexto social en el que se desempeña e ir de la mano con el desa- rrollo de los pueblos, ampliamente marcado por la evolución del derecho que rige en ellos. Así pues, el neoconstitucionalismo como teoría del derecho, plantea el estudio de las nuevas formas, conceptos, procedimientos, entre otros; que surgen a partir de las constituciones modernas y que imponen retos a todas las instituciones, entre ellas las judiciales. El sistema de control difuso de constitucionalidad es una de las figuras que exige ser analizada, estructurada y asumida como un reto a la luz del neoconstitucionalismo en la experiencia y el contexto propio colombiano.Palabras clave: Neoconstitucionalismo, Control difuso de constitucionalidad, Constitucionalización.Abstract This essay has a qualitative research approach and a descriptive scope, therefore the methodology used for its construction corresponds to the documentary or bibliographical review that would allow analyzing the role of judges in the diffuse control of constitutionality, in the context of Colombian neoconstitutionalism. The main finding is that the role of judges in a legal system should not be understood as the fulfillment of pre-establish, mechanical functions, but they must obey the social con- text in which they work and go hand in hand with the development of peoples significantly marked by the evolution of the law

  9. Sistema de gestión para el control interno de inventarios en la empresa Agrorab CÍA. LTDA

    OpenAIRE

    Vedga Castillo, Jenny Esperanza

    2011-01-01

    La tesis desarrollada a continuación fue concebida por la necesidad de un mayor conocimiento referente a los beneficios de un control interno en el área de inventarios dentro de la empresa AgroRAB Cía. Ltda. y su incidencia a los resultados financieros de la misma. A continuación damos a conocer el contenido de un trabajo de investigación denominado " Sistema de Gestión para el control interno de inventarios en la empresa AgroRAB Cía. Ltda ", en el cual damos a conocer algunas resoluciones...

  10. Importance of the harmonics in the lighting systems for the electric energy saving; Importancia de las armonicas en el sistema de iluminacion para el ahorro de energia electrica

    Energy Technology Data Exchange (ETDEWEB)

    Garibay Mendoza, V. [Lumisistemas, departamento de aseguramineto de calidad, Naucalpan (Mexico); Hernandez Bernal, J. M. [UNICORP, Mexico, D. F. (Mexico)

    1995-12-31

    In a lighting system the discharge lamps (fluorescent and high intensity discharge (HID)), ballast and controls are generating elements of harmonics. As a consequence of the tendency of saving energy, the use of electronic ballasts and controls that integrate dimmers, daylight and present sensors has increased in order to optimize the energy use. This paper presents the harmonics generation resulting from the fluorescent lamps operating different electronic ballasts as well as their electronic controls. Likewise, are also shown the effects caused by generation of harmonics components by the lighting system in the electric system that go from the voltage and current distortion, the presence of currents in the neutral conductor in balanced systems to the repercussions in the metering equipment such as watthour meters and the effects the lighting equipment suffer due to the presence of harmonics, such as the power factor decrease in ballasts that are of high power factor and the temperature increment in the magnetic type ballasts. [Espanol] Dentro de un sistema de iluminacion, las lamparas de descarga (fluorescentes y alta intensidad de descarga {sup H}ID{sup )}, balastros y los controles son elementos generadores de armonicas. A consecuencia de la tendencia al ahorro de energia se ha incrementado el uso de balastros electronicos y controles que integran atenuadores de luz (dimmers), sensores de luz natural y de presencia con el fin de optimizar el uso de la energia. Este trabajo presenta los resultados de generacion de armonicas para lamparas fluorescentes, operando diferentes balastros electronicos asi como con controles electronicos. Asi mismo son presentados los efectos causados por la generacion de componentes armonicas por el sistema de iluminacion dentro del sistema electrico que van desde la distorsion en voltaje y corriente, la presencia de corrientes dentro del conductor neutro en sistemas balanceados, asi como la repercusion en los equipos de medicion tales

  11. Importance of the harmonics in the lighting systems for the electric energy saving; Importancia de las armonicas en el sistema de iluminacion para el ahorro de energia electrica

    Energy Technology Data Exchange (ETDEWEB)

    Garibay Mendoza, V [Lumisistemas, departamento de aseguramineto de calidad, Naucalpan (Mexico); Hernandez Bernal, J M [UNICORP, Mexico, D. F. (Mexico)

    1996-12-31

    In a lighting system the discharge lamps (fluorescent and high intensity discharge (HID)), ballast and controls are generating elements of harmonics. As a consequence of the tendency of saving energy, the use of electronic ballasts and controls that integrate dimmers, daylight and present sensors has increased in order to optimize the energy use. This paper presents the harmonics generation resulting from the fluorescent lamps operating different electronic ballasts as well as their electronic controls. Likewise, are also shown the effects caused by generation of harmonics components by the lighting system in the electric system that go from the voltage and current distortion, the presence of currents in the neutral conductor in balanced systems to the repercussions in the metering equipment such as watthour meters and the effects the lighting equipment suffer due to the presence of harmonics, such as the power factor decrease in ballasts that are of high power factor and the temperature increment in the magnetic type ballasts. [Espanol] Dentro de un sistema de iluminacion, las lamparas de descarga (fluorescentes y alta intensidad de descarga {sup H}ID{sup )}, balastros y los controles son elementos generadores de armonicas. A consecuencia de la tendencia al ahorro de energia se ha incrementado el uso de balastros electronicos y controles que integran atenuadores de luz (dimmers), sensores de luz natural y de presencia con el fin de optimizar el uso de la energia. Este trabajo presenta los resultados de generacion de armonicas para lamparas fluorescentes, operando diferentes balastros electronicos asi como con controles electronicos. Asi mismo son presentados los efectos causados por la generacion de componentes armonicas por el sistema de iluminacion dentro del sistema electrico que van desde la distorsion en voltaje y corriente, la presencia de corrientes dentro del conductor neutro en sistemas balanceados, asi como la repercusion en los equipos de medicion tales

  12. System of aid for the starting of the steam generator of a thermoelectric unit; Sistema de ayuda para el arranque del generador de vapor de una unidad termoelectrica

    Energy Technology Data Exchange (ETDEWEB)

    Quintero R, Agustin; Suarez C, Dionisio A; Aquino E, Juan C; Diaz H, Carlos A; Cruz T, Jorge A; Sanchez L, Jose A [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2002-07-01

    This article presents the development of an on line aid system, whose objective is to aid the operator of a thermoelectric unit, providing the information that is required to carry out the heating and pressurization of the steam generator in the shortest possible time. The former takes place respecting the operation limits determined by the manufacturer and the conditions of security established to carry out the maneuvers of operation of the equipment. The system incorporates a scheme of predictive control, based on a neuronal model that estimates the optimal position of two final elements of control to fulfill with the curves of reference for the temperature and pressure of the main steam. The system is based on an architecture client-server and uses technology Web for the access of the information through a navigator of the Internet. [Spanish] Este articulo presenta el desarrollo de un sistema de ayuda en linea, cuyo objetivo es asistir al operador de una unidad termoelectrica, proporcionando la informacion que requiere para llevar a cabo el calentamiento y presurizacion del generador de vapor en el menor tiempo posible. Lo anterior se efectua respetando los limites de operacion determinados por el fabricante y las condiciones de seguridad establecidas para efectuar las maniobras de operacion de los equipos. El sistema incorpora un esquema de control predictivo, basado en un modelo neuronal, que estima la posicion optima de dos elementos finales de control para cumplir con las curvas de referencia para la temperatura y presion del vapor principal. El sistema esta basado en una arquitectura cliente-servidor y utiliza tecnologia Web para el acceso a la informacion a traves de un navegador del Internet.

  13. Gaseous irrigation control system: descriptions and phisical tests for performance assessment Sistema gasoso de controle de irrigação: descrição e testes físicos para a avaliação de desenpenho

    Directory of Open Access Journals (Sweden)

    Adonai Gimenez Calbo

    2006-01-01

    Full Text Available Irrigas is a water tension measuring system made out of a porous cup (sensor, connected to a gas pressurizing/measuring device by a flexible tube. Water tension (T is obtained from the equation T=Td-p or T=Ts-p, where Td is the sensor desorption critical water tension (bubbling beginning, Ts is the sensor sorption critical water tension (bubbling ceasing and p is the applied gas pressure. Differently from conventional tensiometers, the irrigas porous cup cavity is filled with air. This characteristics makes the irrigas system nearly maintenance free and also eliminates the need of making hydrostatic pressure corrections for sensor depth. The system was tested both in the desorption and sorption modes. In the first case the Richards pressure chamber was used to adjust the soil water tension which makes the porous cup air permeable. The water tension thus obtained was always practically equal to the Td values measured by the bubbling method, observation that is a physical validation of the barrel immersion technique for irrigas usage for irrigation management. Important for instrument dimensioning, porous cup water loss as a function of water tension measured from zero to Td was diminutive, increased with the soil water tension and was smaller in higher Td porous cups. In the sorption mode, functioning as a gaseous tensiometer, driven by a steady air-flow source, irrigas sensors yielded, directly, water tension readings ranging from zero to Ts. For irrigation scheduling purposes, commercial irrigas water tension systems can be selected according to crop critical water tension requirements.Irrigas é um sistema para medir tensão de água (T constituído de uma cápsula porosa (sensor ligada a um dispositivo de aplicar/medir pressão de gás. T é obtido com as expressões: T=Td-p e T=Tsp, sendo Td a tensão crítica de dessorção da água (início de borbulhamento; Ts é a tensão crítica de sorção (fim de borbulhamento e p a pressão gasosa

  14. Reactor control system. PWR

    International Nuclear Information System (INIS)

    2009-01-01

    At present, 23 units of PWR type reactors have been operated in Japan since the start of Mihama Unit 1 operation in 1970 and various improvements have been made to upgrade operability of power stations as well as reliability and safety of power plants. As the share of nuclear power increases, further improvements of operating performance such as load following capability will be requested for power stations with more reliable and safer operation. This article outlined the reactor control system of PWR type reactors and described the control performance of power plants realized with those systems. The PWR control system is characterized that the turbine power is automatic or manually controlled with request of the electric power system and then the nuclear power is followingly controlled with the change of core reactivity. The system mainly consists of reactor automatic control system (control rod control system), pressurizer pressure control system, pressurizer water level control system, steam generator water level control system and turbine bypass control system. (T. Tanaka)

  15. Modelizacion, control e implementacion de un procesador energetico paralelo para aplicacion en sistemas multisalida

    Science.gov (United States)

    Ferreres Sabater, Agustin

    Cualquier sistema electronico que incluya un procesado o tratamiento de la senal, y ademas, algun tipo de actuador mecanico generalmente necesita, como minimo, dos tensiones diferentes de alimentacion. Excluyendo los sistemas de alimentacion distribuida, la solucion tecnica mas utilizada para proporcionar dos o mas tensiones consiste en las fuentes de alimentacion multisalida. En una fuente de alimentacion multisalida los diferentes circuitos que conforman cada salida comparten un mismo transformador de potencia optimizando coste, masa, y volumen. Las ventajas obtenidas con este procedimiento tienen en su contra el efecto que sobre cada salida individual provocan las demas en su conjunto debido, principalmente, a los efectos de los elementos parasitos de los componentes. Un cambio de carga en una de las salidas produce un transitorio que es visto por todas las demas como un efecto de impedancia cruzada, y al final del transitorio, la tension de cada salida es diferente respecto a la que tenian antes del transitorio. Este ultimo resultado se conoce como regulacion cruzada. La disminucion de los efectos de la regulacion cruzada ha sido objeto de estudio durante los ultimos anos. El objetivo ha sido el desarrollo de distintas estrategias que permiten, desde disminuir los efectos de la regulacion cruzada hasta los niveles deseables, a eliminarla completamente. El resultado final suele suponer una penalizacion sobre el diseno del sistema directamente proporcional al grado de regulacion a conseguir en las distintas salidas. Entre las soluciones propuestas para eliminar la regulacion cruzada las tecnicas de post-regulacion se han consolidado como la opcion mas aceptada ya que, pueden aplicarse a cualquier convertidor y no suponen ninguna complejidad adicional a la hora de plantear el diseno. En esta Tesis Doctoral se abordara el estudio de la tecnica conocida como postregulacion mediante transformador controlado, que si bien se ha empleado en convertidores resonantes, su

  16. BSC Modelling for ACAFE's Universities system Modelando o BSC para as Universidades do Sistema ACAFE

    Directory of Open Access Journals (Sweden)

    Manuel Portugal Ferreira

    2010-02-01

    Full Text Available Schools that perform graduation courses are facing increased competition and many have find the need of a more competitive and strategic vision. This study describes a Balanced Scorecard example of typical implementation for educational institutions. The case study describes in details the implemention as performed in ACAFE system, a Santa Catarina's network of educational institutions.As Instituições de Ensino Superior (IES, percebendo o acirramento da concorrência, reconhecem a importância de repensar sua forma de gestão, buscando uma visão mais competitiva e continuada. Assim, com o objetivo de contribuir para a gestão estratégica dessas instituições, especificamente as pertencentes ao sistema ACAFE, foi utilizada neste estudo a ferramenta de gestão Balanced Scorecard (BSC. Algumas etapas foram necessárias à sua adequação às universidades fundacionais catarinenses. Apresentaram-se e identificaram-se algumas características existentes no ambiente das universidades fundacionais catarinenses e suas peculiaridades em relação a outras organizações que não integram esse setor; realizaram-se os ajustes necessários à ferramenta Balanced Scorecard às universidades do sistema ACAFE; bem como a proposta da ferramenta auxiliar denominado mapa estratégico. Por último demonstrou-se a possibilidade de se desenvolver e utilizar o BSC acadêmico institucional como forma de integrar mais de um campus a gestão focada na estratégia.

  17. Banco de sementes de arroz vermelho em sistemas de semeadura de arroz irrigado Red rice seed bank under seeding systems of flooded rice

    Directory of Open Access Journals (Sweden)

    Luis Antonio de Avila

    2000-10-01

    Full Text Available O experimento foi conduzido com o objetivo de estimar a variação do banco de sementes viáveis de arroz vermelho (Oryza sativa L., em três sistemas de semeadura de arroz (O. sativa L. irrigado (semeadura convencional, direta e com sementes pré-germinadas, após três anos de cultivo na mesma área, em São Borja, RS, em solo classificado como Planossolo, com infestação média de 150 plantas de arroz vermelho por m² antes da instalação do experimento. A coleta do solo para estimativa do banco de sementes de arroz vermelho foi realizada com um trado cilíndrico de metal de 10cm de diâmetro. Foram realizadas amostragens de solo, com 12 amostras por parcela em duas profundidades (0-1cm e 1-10cm, para retirar os grãos de arroz vermelho, submetê-los ao teste de tetrazólio e determinar sua viabilidade. O experimento foi um bifatorial em blocos ao acaso, com três repetições, com os sistemas de semeadura de arroz como fator principal e as profundidades de coleta como fator secundário. Os dados demonstraram que o número de sementes viáveis de arroz vermelho no solo foi maior na área onde o arroz foi cultivado no sistema de semeadura convencional (1994 sementes/m², com valores intermediários para o sistema de semeadura direta (597 sementes/m² e menores valores para o sistema de semeadura com sementes pré-germinadas (93 sementes/m². Assim, demonstra-se que a semeadura de arroz no sistema de sementes pré-germinadas favorece o controle do arroz vermelho, mantendo a quantidade de sementes em densidades menores do que nos sistemas de semeadura direta e convencional.An experiment was conducted aiming to estimate the variability of viable seeds of red rice (Oryza sativa L. in soil under three rice (O. sativa L. seeding systems: conventional, no-tillage and water seeded. It was located in São Borja, Rio Grande do Sul state, Brazil, in an albaqualf soil with an average of 150 red rice plants per square meter before establishing the

  18. Efeito do sistema de plantio e doses do nicosulfuron sobre a atividade microbiana do solo Effect of planting system and nicosulfuron doses on soil microbial activity

    Directory of Open Access Journals (Sweden)

    G.N Camelo

    2011-12-01

    Full Text Available Objetivou-se com este trabalho avaliar o efeito do atrazine em mistura com nicosulfuron sobre a atividade microbiológica do solo em sistema de cultivo convencional ou semeadura direta. O estudo foi realizado em área de integração milho-braquiária, sendo feitas aplicações dos herbicidas atrazine + nicosulfuron em duas dosagens (1.500 + 10 e 1.500 + 30 g h-1 e mantidas duas áreas testemunhas: não capinada e capinada sem cultivo. Por ocasião do florescimento, foram retiradas amostras do solo em cada unidade experimental, para determinação da taxa de desprendimento de CO2, carbono da biomassa microbiana (CBM e quociente metabólico (qCO2. Entre os sistemas de cultivo, a taxa de desprendimento de CO2 foi menor nas parcelas não capinadas. O CBM foi maior no sistema de plantio direto, sendo afetado negativamente pela ausência de vegetação. Menores valores para CBM foram observados nas amostras de solo das parcelas capinadas. Os maiores valores de qCO2 foram observados no sistema convencional. No sistema de plantio direto não se verificou diferença entre os tratamentos cujo solo recebeu herbicida e o isento de capinas. Dessa forma, pode-se concluir que os indicadores microbiológicos avaliados foram sensíveis aos tratamentos propostos, indicando menor distúrbio ao solo quando em sistema de semeadura direta. Entretanto, na integração lavoura-pecuária em sistema convencional de cultivo, o efeito negativo dos herbicidas é aumentado com o incremento na dose do nicosulfuron.This study aimed to evaluate the effect of atrazine + nicosulfuron on soil microbial activity, under the conventional and no-tillage systems. The experiment was carried out in an area of maize-brachiaria intercropping, where atrazine + nicosulfuron were applied at (1,500 + 10 and 1,500 + 30 g h-1 with a weed-handed area being maintained without prior cultivation and another area without weed control. At flowering, soil samples were collected to determine the rate

  19. Impacto do Sistema de Controle sobre a Venda de Novos Produtos

    Directory of Open Access Journals (Sweden)

    Valter Afonso Vieira

    2015-08-01

    Full Text Available This paper’s main goal is to understand the impact of control systems on the relationship between a salesperson’s effort and their performance. The control systems have two perspectives: outcome and behavior. The difference between them is how a salesperson is evaluated in regards to their job. If the sales manager is only concerned with sales results, the control system is based on outcome. However, if the sales manager is concerned with a salesperson’s capacities, abilities and knowledge, the control system is based on behavior. Based on the theories developed by Anderson and Oliver (1987 and Oliver and Anderson (1994, we proposed a theoretical framework to explain sales performance, positioning the control system as a moderating variable. We undertook two descriptive field investigations to test the proposed model’s hypotheses for pharmaceutical sales representatives and car dealer salespersons. We estimated four regression equations to test the hypotheses. The first conclusion is that the perception of product innovation by salespeople actually influences the launch of new products. The second conclusion showed that salesperson effort has a negative relationship with performance. Third, we demonstrated the moderating effect control systems have on the relationship between salesperson experience and sales efforts.

  20. Integrated control systems

    International Nuclear Information System (INIS)

    Smith, D.J.

    1991-01-01

    This paper reports that instrument manufacturers must develop standard network interfaces to pull together interrelated systems such as automatic start-up, optimization programs, and online diagnostic systems. In the past individual control system manufacturers have developed their own data highways with proprietary hardware and software designs. In the future, electric utilities will require that future systems, irrespective of manufacturer, should be able to communicate with each other. Until now the manufactures of control systems have not agreed on the standard high-speed data highway system. Currently, the Electric Power Research Institute (EPRI), in conjunction with several electric utilities and equipment manufactures, is working on developing a standard protocol for communicating between various manufacturers' control systems. According to N. Michael of Sargent and Lundy, future control room designs will require that more of the control and display functions be accessible from the control room through CRTs. There will be less emphasis on traditional hard-wired control panels

  1. Teor de nitrato em alface cultivada em sistemas hidropônico e convencional Level of nitrate in lettuce cultivated in hydroponic and conventional systems

    Directory of Open Access Journals (Sweden)

    Elisabete R. Yonamini Beninni

    2002-06-01

    Full Text Available O monitoramento do teor de nitrato nos alimentos é importante, uma vez que poderão ser formados compostos prejudiciais à saúde humana e animal após sua ingestão. Com o objetivo de avaliar o teor de nitrato presente em alface, foram coletadas e analisadas as folhas de alface crespa comercializada no Município de Londrina, cultivada em sistemas hidropônico e convencional. Os valores encontrados variaram entre 26 e 2.568 mg.kg-1 de peso fresco, sendo que as plantas cultivadas em sistema hidropônico apresentaram teores superiores em relação às cultivadas em sistema convencional, porém abaixo do limite máximo de nitrato permitido para alface, na Europa.The control of the nitrate level in foods is important because this substance may be harmful to human and animal health. The aim of this work was to evaluate nitrate levels in lettuce produced in hydroponic and conventional systems and commercialized in Londrina, Brazil. The nitrate concentration ranged from 26 to 2,568 mg.kg-1 fresh weight. Hydroponic lettuce showed higher levels of nitrate but in all cases the level of nitrate was lower than the maximum allowed by the Comission of the European Communities.

  2. El sistema de control interno y su incidencia en las unidades de logística y control patrimonial de la municipalidad provincial de talara - 2014

    OpenAIRE

    Alfaro Alfaro, Gustavo Otilano

    2016-01-01

    La investigación titulada, “El Sistema de Control Interno y su incidencia en las Unidades de Logística y Control Patrimonial de la Municipalidad Provincial de Talara”, tiene como propósito, proponer la implementación de una eficiente Estructura de Control Interno, mediante la aplicación del Informe COSO I, enfoque moderno sobre Control Interno, en las Unidades de Logística y Control Patrimonial de la Municipalidad provincial de Talara, para el mejoramiento de su gestión y el logro de sus obje...

  3. La Resolución de problemas mediante el sistema de aplicación Microsoft Access Problem solving by means of Microsoft Access application system

    Directory of Open Access Journals (Sweden)

    Pablo González Ruíz

    2010-03-01

    Full Text Available Dentro de los contenidos de Informática I que reciben los estudiantes de la carrera de Medicina 1er año, uno de los que más dificultades ofrece para su asimilación, es el relacionado con el sistema de Aplicación Microsoft Access, sobre todo lo relacionado con la resolución de problemas con computadora para diseñar tablas y efectuar relaciones entre estas, de ahí, la necesidad deelaborar un sistema de ejercicios por niveles de desempeño cognitivo que contribuya al desarrollo de la habilidad resolución de problemas con computadoras, utilizando el sistema Microsoft Access, contemplando entre otros aspectos: el diseño o trabajo de mesa como premisa básica (Diagrama entidad relación y el Modelo entidad relación. El sistema de ejercicios es elaborado sobre la base de un estudio cuasi experimental que abarca 2 brigadas de 1er año de la facultad de ciencias médicas Ernesto Che Guevara de la Serna del municipio de Pinar del Río. Este tiene como fundamento los controles a clase efectuados, las comprobaciones de conocimientos realizadas, las que han evidenciado dificultades en la resolución de problemas al elaborar bases de datos utilizando Microsoft Access. La novedad del sistema está en que contempla ejercicios sobre la perspectiva desarrolladora de los niveles de desempeño cognitivo. La conclusión esencial a la que se arriba, es que con este sistema el alumno se familiariza más rápido con los conceptos (tabla, atributo, campo, registro, campo clave y otros antes de ir al sistema informático o sea se logra un mejor camino del pensamiento lógico, de la contemplación viva al pensamiento abstracto y de este a la práctica como prueba de la verdad.Among the contents of the subject of Informatics-1 that medical students in 1st academic year receive, one of the most difficult contents to be assimilated is the one related to Microsoft Access Application, mainly the one connected with problem-solving using the computer to design tables

  4. SAMO [Sistema de Apoyo Mechanizado a la Operacion]: An operational aids computer system

    International Nuclear Information System (INIS)

    Stormer, T.D.; Laflor, E.V.

    1989-01-01

    SAMO (Sistema de Apoyo Mechanizado a la Operacion) is a sensor-driven, computer-based, graphic display system designed by Westinghouse to aid the A. N. Asco operations staff during all modes of plant operations, including emergencies. The SAMO system is being implemented in the A. N. Asco plant in two phases that coincide with consecutive refueling outages for each of two nuclear units at the Asco site. Phase 1 of the SAMO system implements the following functions: (1) emergency operational aids, (2) postaccident monitoring, (3) plant graphics display, (4) high-speed transient analysis recording, (5) historical data collection, storage, and retrieval, (6) sequence of events, and (7) posttrip review. During phase 2 of the SAMO project, the current plant computer will be removed and the functions now performed by the plant computer will be performed by the SAMO system. In addition, the following functions will be implemented: (1) normal and simple transients operational aid, (2) plant information graphics; and (3) real-time radiological off-site dose calculation

  5. A national control system

    International Nuclear Information System (INIS)

    Larsson, A.

    1975-01-01

    An effective control of nuclear fissionable material is dependent on three different kinds of control, the industry - laboratory management, a national control system and an international safeguards system. The national systems of control differ greatly between various industrialized countries. Two principal reasons for fact can be mentioned. The type and the amounts for nuclear material may be different depending upon the stage of development of the nuclear industry in the country in question. Another reason may be that the country may wish to establish a very elaborate national system of control in order to minimize the IAEA control as much as possible. The two safeguards agreements between the Agency and Sweden on one hand and the Agency and Japan on the other hand can serve as examples for the understanding of the latitude of the IAEA safeguards system under NPT due to the influence of the national control system. If it thus is apparent that the national control system is strongly interrelated to the international safeguards system it is equally influenced by the control and accountancy systems which exist at the nuclear plants and development laboratories. A detailed study of national control systems and their relations to plant management control would fall outside the scope of this article. Some important features will however be examined. (author)

  6. Calculation of sensitivities in electrical systems with SIFLETCA devices; Calculo de sensibilidades en sistemas electricos con dispositivos SIFLETCA

    Energy Technology Data Exchange (ETDEWEB)

    Rubio Marroquin, Gabriel Omar

    2004-03-15

    With the purpose of avoiding the installation of new transmission lines, some researches have proposed the installation of SIFLETCA devices. Therefore in this thesis, different models in steady state of diverse SIFLETCA devices are described, such as: compensator variable series (VSC), static compensator of VArs (SCV), transformer phase shifter (TPS), transformer with changer under load (TWCL) and the universal controller of power flows (UCPF). In addition, it is developed in this thesis the equations used in the Jacobean of the method Newton-Raphson, to solve power flows including SIFLETCA devices. The different applications that are obtained when installing a device, such as prevention of flows in ring, electronic barrier, increment in the transmission capacity and specification of the power flow in transmission lines. On the other hand in the thesis, an analysis of sensitivities of a power system in steady state is developed. Also the control parameters are proposed in the thesis for which the sensitivities are calculated. Also, a performance index is used to measure the degree of congestion of an electrical system. In calculating the sensitivities the obtained results of the power flows are utilized. Four electrical networks are used to find where each SIFLETCA device must be located to reduce the congestion in the system. Also, the method developed in the thesis is compared with a method of sensitivities that uses DC flows, for validation and to show the advantages of using the Newton method in power flows. [Spanish] Con el fin de evitar instalar nuevas lineas de transmision, algunos investigadores han propuesto la instalacion de los dispositivos SIFLETCA. Por lo tanto en esta tesis, se describe diferentes modelos en estado estacionario de diversos dispositivos SIFLETCA, siendo: compensador serie variable (CSV), compensador estatico de VArs (CEV), transformador desfasador (TD), transformador con cambiador bajo carga (TTC) y el controlador universal de flujos

  7. Sistema de diagnóstico para la estimación de secciones en fallo en sistemas eléctricos de potencia; A Diagnostic Systems to Estimate Faulty Sections in Power Electric Systems

    Directory of Open Access Journals (Sweden)

    Marta Bravo de las Casas

    2011-02-01

    Full Text Available El sistema de diagnóstico para la estimación de secciones en fallo (SDESF para sistemas eléctricos depotencia (SEP expuesto en el trabajo, usa la información procedente de los relés operados e interruptoresdisparados. Está escrito en Prolog, lenguaje de inteligencia artificial e implementado en una computadorapersonal. La tarea básica de este sistema es entrenar a los despachadores y utilizarlo como una herramientade apoyo a la toma de decisiones del despachador ante situaciones de emergencias complejas con unambiente computacional de usuario amigable. Este sistema ha sido verificado prácticamente por pruebasrealizadas en el SEP del territorio central de Cuba y los resultados preliminares de las pruebas sugieren quepuede ser implementado para el entrenamiento de despachadores. Se ha demostrado la efectividad delsistema para identificar la localización del fallo muy eficientemente, por lo tanto, puede servir como uninstrumento valioso de ayuda para la localización de fallos, y puede ser usado en las universidades comomedio de enseñanza. El sistema en un futuro pudiera ser ampliado para conectarse al sistema Scada(Sircre-2 a tiempo real para la estimación de secciones en fallo on-line.  The diagnostic system to estimate faulty sections (DSEFS in power electric systems (PES shown in thework it uses the information coming from the relays and breakers operated. It is written in Prolog Language ofartificial Intelligence and implemented in a personal computer. The basic task of this system is to train thedispatchers and to use it like a support tool to the taking of the dispatcher's decisions before situations ofcomplex emergencies with an ambient computacional of friendly user. This system has been verified practicallyby tests carried out in the PES of the central territory of Cuba and the preliminary results of the tests suggestthat  it  can  be  implemented  for  the  training  of  dispatchers.  The  effectiveness  of  the

  8. SISTEMA DE GESTIÓN DE NO CONFORMIDADES PARA LOS PRODUCTOS COMERCIALES DEL CENTRO DE INMUNOLOGÍA MOLECULAR / NON-CONFORMITIES MANAGEMENT SYSTEM FOR COMMERCIAL PRODUCTS IN THE MOLECULAR IMMUNOLOGY CENTER

    Directory of Open Access Journals (Sweden)

    Yuliet Romero-Ruiz

    2011-03-01

    Full Text Available

    Este artículo describe el diseño y la implementación de un sistema de gestión para las no conformidades generadas durante la fabricación y la distribución de los productos biotecnológicos comerciales en el Centro de Inmunología Molecular. El trabajo abarcó desde la etapa de planificación, con el establecimiento de los indicadores de eficiencia y eficacia del sistema, hasta la evaluación del mismo. Para el control del sistema se emplearon técnicas de ingeniería de la calidad. El diseño del sistema se basó en los principios de la gestión por procesos, la administración del riesgo y el enfoque de sistema. Al año de implementación del sistema se habían gestionado 129 no conformidades y el 83% de ellas estaban cerradas. Además, se observó una disminución en el número de las no conformidades detectadas por las inspecciones regulatorias.

    Abstract

    This article describes the design and implementation of a management system for nonconformities generated during the manufacture and distribution of commercial biotechnological products in the Molecular Immunology Centre. The work ranged from the planning stage, with the establishment of indicators of efficiency and effectiveness of the system, to its assessment. Quality engineering techniques were used for monitoring the system. The system design was based on the principles of process management, risk management and systems approach. One year after the implementation of the system, 129 non-conformities had been managed and 83% of them were closed. In addition, there was a decrease in the number of nonconformities identified by regulatory inspections.

  9. Design and simulation of an automation system of a production process and fractionation of {sup 131}I, using strategies of advanced control; Diseno y simulacion de un sistema de automatizacion del proceso de produccion y fraccionamiento de {sup 131}I, utilizando estrategias de control avanzado

    Energy Technology Data Exchange (ETDEWEB)

    Paez, Jose; Arias, Pablo; Miranda, Jesus, E-mail: jpaez@jpen.gob.pe, E-mail: parias@ipen.gob.pe, E-mail: jmiranda@ipen.gob.pe [Instituto Peruano de Energia Nuclear (lPEN), Lima (Peru). Direccion de Servicios. Division de Instrumentacion Nuclear

    2013-10-01

    In this report, the results are obtained in the design and simulation of a control system using advanced strategies in a production cell in the Plant Production of Radioisotopes of IPEN. The results demonstrate that the temperature of the coalition oven is stabilized after 30 minutes, being constituted in an advantage to obtain the maximum yield of the cell production of {sup 131}I; also, an integral good controller has been designed that allows to obtain a mathematical model that reproduces with enough accuracy the behavior of the process. With the final simulation it has been to demonstrate that the System Control of Temperature of the Cell Production of {sup 131}I is a controllable system and allows to carry out the respective sequence with other variables of control of the production cell. (author)

  10. Use of fuzzy logic to control a gasifier biomass ventilation system and maintenance of the temperature in the oxidation zone; Uso da logica fuzzy para controle do sistema de ventilacao de um gaseificador de biomassa e manutencao da temperatura da zona de oxidacao

    Energy Technology Data Exchange (ETDEWEB)

    Rezende, Oscar L.T.; Kulitz, Hans H. [Instituto Federal de Educacao, Ciencia e Tecnologia do Espirito Santo (IFES), Vitoria, ES (Brazil); Silva, Jadir N.; Galvarro, Svetlana F.S.; Machado, Cassio [Universidade Federal de Vicosa (UFV), MG (Brazil)], E-mail: oscar@ifes.edu.br

    2012-11-01

    This study aims at developing a fuzzy-based algorithm to control the frequency applied to the motor of a gasifier ventilation system in order to ensure adequate temperature in the oxidation zone and produce good quality gas. The input variables of the fuzzy controller were: error, which determines the difference between the desired temperature and the temperature at a given instant; and temperature variation, which will inform if it is increasing or decreasing at a given instant. The response variable was the operation frequency of the ventilation system motor. The rule base was built based on experimental data. The tests with the control algorithm allowed us to see that it is possible to control the oxidation zone temperature - producing gas in a stable way, which does not occur in gasification processes without ventilation system control. (author)

  11. Intelligent control systems 1990

    International Nuclear Information System (INIS)

    Shoureshi, R.

    1991-01-01

    The field of artificial intelligence (Al) has generated many useful ideas and techniques that can be integrated into the design of control systems. It is believed and, for special cases, has been demonstrated, that integration of Al into control systems would provide the necessary tools for solving many of the complex problems that present control techniques and Al algorithms are unable to do, individually. However, this integration requires the development of basic understanding and new fundamentals to provide scientific bases for achievement of its potential. This book presents an overview of some of the latest research studies in the area of intelligent control systems. These papers present techniques for formulation of intelligent control, and development of the rule-based control systems. Papers present applications of control systems in nuclear power plants and HVAC systems

  12. Update of the Picker C9 irradiator control system of the gamma II room of the secondary laboratory of dosimetric calibration; Actualizacion del sistema de control del irradiador Picker C9 de la sala gamma II del laboratorio secundario de calibracion dosimetrica

    Energy Technology Data Exchange (ETDEWEB)

    Simon S, L. E.

    2016-07-01

    The Picker C9 irradiator is responsible for the calibration of different radiological equipment and the control system that maintains it in operation is designed in the graphical programming software LabVIEW (Laboratory Virtual Instrumentation Engineering Workbench), being its major advantages: the different types of communication, easy interconnection with other software and the recognition of different hardware devices, among others. Operation of the irradiator control system is performed with the NI-Usb-6008 (DAQ) data acquisition module of the National Instruments Company. The purpose of this work is to update the routines that make the Picker C9 control system of the gamma II room of the secondary laboratory of dosimetric calibration, using the graphic programming software LabVIEW, as well as to configure the new acquisition hardware of data that is implemented to control the Picker C9 irradiator system and ensure its operation. (Author)

  13. Comparación del sistema constructivo de Putucos con otros sistemas constructivos en tierra = Comparison of the construction system of Putucos with other construction systems in earth

    Directory of Open Access Journals (Sweden)

    Andrea Gamio Felipa

    2017-08-01

    Full Text Available El artículo tiene como objetivo comparar las diferentes propiedades mecánicas y físicas de 3 sistemas constructivos en tierra tales como el adobe, quincha y champa (Los Putucos, con el propósito de lograr una nueva línea de investigación para las champas y que, puedan ser parte de la implementación de las viviendas rurales que se realizan constantemente en el altiplano peruano. La metodología del trabajo consiste en la comparación de resultados obtenidos de investigaciones previas que muestren que dicho material tiene una resistencia en el tiempo superior al adobe y la quincha, sin embargo, existe ausencia de algunos datos de las champas ya que en la actualidad solo se ha realizado un análisis científico con ensayos sobre este material que serán analizados en el artículo. Es por ello que no se puede determinar en totalidad su eficiencia por la carencia de algunos ensayos, pero si podemos determinar una nueva línea de investigación. Abstract The present article has a purpose to compare the different mechanical and physical properties of 3 construction systems or material in earth, such as Adobe, quincha and champa (The Putucos, with the purpose of achieving a new line of research for champas’ material and can be part of the rural houses implementation which are constantly being carried out in the Peruvian highlands. It has been used the comparison of results obtained from previous research that may show that the material has a higher resistance over time than others, however, there is an absence of some data from the champas and actually exist only one Scientific analysis with test on this material, that is analyzed in the article. It is for this reason that it can’t fully determine its efficiency by lack of some tests, but it can determine a new line of research.

  14. Efeitos da melatonina no sistema genital feminino: breve revisão Melatonin effects on the female genital system: a brief review

    Directory of Open Access Journals (Sweden)

    Carla C. Maganhin

    2008-06-01

    Full Text Available A melatonina é um hormônio produzido pela glândula pineal, cuja secreção está diretamente relacionada ao ciclo claro-escuro. É um poderoso antioxidante e tem papel fundamental na regulação do estado sono/vigília, do ritmo de vários processos fisiológicos, participando do controle do relógio biológico, inclusive nos seres humanos. Ressalta-se que há evidências da sua ação no sistema genital feminino, influenciando a função ovariana e a fertilidade. De fato, este hormônio interage com esteróides sexuais, como o estrogênio, modificando a sinalização celular e a resposta no tecido alvo. Estudos clínicos sugerem que o tratamento com a melatonina interviria com a evolução de neoplasia-dependente do estrogênio. O objetivo dessa revisão é analisar as principais ações da melatonina no sistema neuroendócrino, no ciclo sono-vigília, no sistema imunológico, no sistema cardiovascular, bem como no sistema reprodutor.Melatonin is secreted by the pineal gland and this is linked to the day/night cycle. It is an antioxidant and plays a fundamental role in the regulation of the jet-lag stage, in several physiological reactions and in control of the biologic rhythm. Human melatonin has an important influence on the female genital system. In fact, melatonin may influence production and action of steroids, modifying cellular signalization on the target tissue. There are many evidences that the melatonin therapy may be interfering with neoplasia development, mainly of the estrogen-dependent tumor. This paper aims to analyze the actions of melatonin on the neuroendocrine, immunological and cardiovascular systems, as well as on the reproductive function.

  15. Modelling and application of modern control techniques to governor and voltage regulator systems of synchronous machines of small hydroelectric power plants; Modelagem e aplicacao de tecnicas de controle moderno a sistemas reguladores de velocidade e tensao de maquinas sincronas de pequenas centrais hidreletricas

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Claudio Homero Ferreira da

    2002-07-01

    In small hydroelectric plants the control system is quite simplified. It is sometimes mounted in a primitive and archaic way although it is functional. Performance of this system determines the final quality of the energy, stability and physical integrity of the apparatus as well as the whole electric system. Based on the present situation of the electric system, it is noticed a tendency in building and modernizing early small hydroelectric plants in order to increase energy supply very fast with low cost and satisfying environmental constraints. The development of mathematical tools and digital computer facilities have made possible the use of advanced automatic control structures that take into account the process stability even in presence of noise measurement and plant/model mismatch. Physical modifications in the plant are proposed in order to provide significant improvement in closed loop behaviour of the turbine speed and terminal voltage control. The decision ability and flexibility of the computer package to be developed are the major aspects that support this research. It will be intended to incorporate this control computer package into programmable logical controller. Experimental data from CEMIG's Martins Hydro Plant (4 x 2750 KVA), located in Uberlandia, Brazil, were used to identify and validate the system model. Pole placement, optimal control and model predictive control techniques were used to controller design. Perfect modeling and plant/model mismatch were considered in both presence and absence of state observers (full order and reduced order) in order to become accessible unmeasured states. Simulation results show developed controllers are promising for the system regulating. The proposed approaches offer a larger control flexibility taking into account plant/model mismatch and stability questions. These results contribute to a quality energy improvement associated to a cost reduction in energy generation process. (author)

  16. Aplicación del sistema de análisis de peligros y puntos de control crítico (APPCC en la línea de elaboración de aceite de oliva virgen

    Directory of Open Access Journals (Sweden)

    Alvarruiz, A.

    2002-09-01

    Full Text Available The Hazard Analysis and Critical Control Point (HACCP is a preventive system which tries to ensure the food safety and wholesomeness and allows us product protect