Modernization of the Almaraz, AscO & VandellOs non-1E Control systems during the last decade the Spanish PWR nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Fuente Arias, E. de la; Serrano Jimenez, J.; Madroñal Rodriguez, E.

2016-07-01

During the last decade the Spanish PWR nuclear power plants designed by Westinghouse have planned and implemented the modernization of the non-1E Control systems. The driving forces behind the modernization of the original Control Systems are the management of the obsolescence of these systems and the implementation of functional improvements in the plants to increase the Control System reliability and availability. Westinghouse Ovation platform has been used in the modernization of the Reactor Control System, Turbine Control System, Plant Computer and Feedwater Heaters Level and MSR s Drains tanks Level control. Modernizations have been spread through the years in such a way that there is not impact on the outages and the different organizations on the customer and estinghouse can have dedicated teams to work in these projects. (Author)

Modern control techniques for accelerators

International Nuclear Information System (INIS)

Goodwin, R.W.; Shea, M.F.

1984-05-01

Beginning in the mid to late sixties, most new accelerators were designed to include computer based control systems. Although each installation differed in detail, the technology of the sixties and early to mid seventies dictated an architecture that was essentially the same for the control systems of that era. A mini-computer was connected to the hardware and to a console. Two developments have changed the architecture of modern systems: (a) the microprocessor and (b) local area networks. This paper discusses these two developments and demonstrates their impact on control system design and implementation by way of describing a possible architecture for any size of accelerator. Both hardware and software aspects are included

GUIDANCE FOR NUCLEAR POWER PLANT CONTROL ROOM AND HUMAN-SYSTEM INTERFACE MODERNIZATION

International Nuclear Information System (INIS)

Naser, J.; Morris, G.

2004-01-01

Several nuclear power plants in the United States are starting instrumentation and control (I and C) modernization programs using digital equipment to address obsolescence issues and the need to improve plant performance while maintaining high levels of safety. As an integral part of the I and C modernization program at a nuclear power plant, the control room and other human-system interfaces (HSIs) are also being modernized. To support safe and effective operation, it is critical to plan, design, implement, train for, operate, and maintain the control room and HSI changes to take advantage of human cognitive processing abilities. A project, jointly funded by the Electric Power Research Institute (EPRI) and the United States Department of Energy (DOE) under the Nuclear Energy Plant Optimization (NEPO) Program, is developing guidance for specifying and designing control rooms, remote shut-down panels, HSIs etc. The guidance is intended for application by utilities and suppliers of control room and HSI modernization. The guidance will facilitate specification, design, implementation, operations, maintenance, training, and licensing activities. This guidance will be used to reduce the likelihood of human errors and licensing risk, to gain maximum benefit of implemented technology, and to increase performance. The guidance is of five types. The first is planning guidance to help a utility develop its plant-specific control room operating concepts, its plant-specific endpoint vision for the control room, its migration path to achieve that endpoint vision, and its regulatory, licensing, and human factors program plans. The second is process guidance for general HSI design and integration, human factors engineering analyses, verification and validation, in-service monitoring processes, etc. The third is detailed human factors engineering guidance for control room and HSI technical areas. The fourth is guidance for licensing. The fifth is guidance for special topics

Pressure control modernization for D2O supply system of the fuel machine

International Nuclear Information System (INIS)

Ionescu, T.; Burla, I.; Vasilache, V.

2005-01-01

The analog controllers of the D 2 O Supply System (BSI-35260) were replaced at Cernavoda NPP U1 with a modern solution built on a new platform with powerful Fischer and Porter controllers. During two years of operating experience this new solution demonstrated its capabilities to work without any fault. This paper describes briefly the involved system, the hardware and software aspects of this solution, how the software solution was tested using the Full-Scope Simulator facilities and finally, results of the tests done in the real plant are discussed. (authors)

Baseline Evaluations to Support Control Room Modernization at Nuclear Power Plants

Energy Technology Data Exchange (ETDEWEB)

Boring, Ronald L.; Joe, Jeffrey C.

2015-02-01

For any major control room modernization activity at a commercial nuclear power plant (NPP) in the U.S., a utility should carefully follow the four phases prescribed by the U.S. Nuclear Regulatory Commission in NUREG-0711, Human Factors Engineering Program Review Model. These four phases include Planning and Analysis, Design, Verification and Validation, and Implementation and Operation. While NUREG-0711 is a useful guideline, it is written primarily from the perspective of regulatory review, and it therefore does not provide a nuanced account of many of the steps the utility might undertake as part of control room modernization. The guideline is largely summative—intended to catalog final products—rather than formative—intended to guide the overall modernization process. In this paper, we highlight two crucial formative sub-elements of the Planning and Analysis phase specific to control room modernization that are not covered in NUREG-0711. These two sub-elements are the usability and ergonomics baseline evaluations. A baseline evaluation entails evaluating the system as-built and currently in use. The usability baseline evaluation provides key insights into operator performance using the control system currently in place. The ergonomics baseline evaluation identifies possible deficiencies in the physical configuration of the control system. Both baseline evaluations feed into the design of the replacement system and subsequent summative benchmarking activities that help ensure that control room modernization represents a successful evolution of the control system.

Baseline Evaluations to Support Control Room Modernization at Nuclear Power Plants

International Nuclear Information System (INIS)

Boring, Ronald L.; Joe, Jeffrey C.

2015-01-01

For any major control room modernization activity at a commercial nuclear power plant (NPP) in the U.S., a utility should carefully follow the four phases prescribed by the U.S. Nuclear Regulatory Commission in NUREG-0711, Human Factors Engineering Program Review Model. These four phases include Planning and Analysis, Design, Verification and Validation, and Implementation and Operation. While NUREG-0711 is a useful guideline, it is written primarily from the perspective of regulatory review, and it therefore does not provide a nuanced account of many of the steps the utility might undertake as part of control room modernization. The guideline is largely summative–intended to catalog final products–rather than formative–intended to guide the overall modernization process. In this paper, we highlight two crucial formative sub-elements of the Planning and Analysis phase specific to control room modernization that are not covered in NUREG-0711. These two sub-elements are the usability and ergonomics baseline evaluations. A baseline evaluation entails evaluating the system as-built and currently in use. The usability baseline evaluation provides key insights into operator performance using the control system currently in place. The ergonomics baseline evaluation identifies possible deficiencies in the physical configuration of the control system. Both baseline evaluations feed into the design of the replacement system and subsequent summative benchmarking activities that help ensure that control room modernization represents a successful evolution of the control system.

Modernization of the automation control system of technological processes at the preparation plant in the conditions of technical re-equipment

Science.gov (United States)

Lyakhovets, M. V.; Wenger, K. G.; Myshlyaev, L. P.; Shipunov, M. V.; Grachev, V. V.; Melkozerov, M. Yu; Fairoshin, Sh A.

2018-05-01

The experience of modernization of the automation control system of technological processes at the preparation plant under the conditions of technical re-equipment of the preparation plant “Barzasskoye Tovarischestvo” LLC (Berezovsky) is considered. The automated process control systems (APCS), the modernization goals and the ways to achieve them are indicated, the main subsystems of the integrated APCS are presented, the enlarged functional and technical structure of the upgraded system is given. The procedure for commissioning an upgraded system is described.

Modernization of the feedwater heaters control level of the Almaraz I Nuclear Power Plant by OVATION system

International Nuclear Information System (INIS)

Madronal Rodriguez, E.; Cabrero Munoz, J. E.

2010-01-01

As a result of the process of technological renovation of the heaters system and the power increase project, Almaraz Nuclear Power Plant has made several design changes in the feedwater heaters system. Within these changes, the old heaters control loops are replaced because the new power will increase the heaters drainage caudal. This modernization is carried out using the OVATION control system.

Towards High Performance Processing In Modern Java Based Control Systems

CERN Document Server

Misiowiec, M; Buttner, M

2011-01-01

CERN controls software is often developed on Java foundation. Some systems carry out a combination of data, network and processor intensive tasks within strict time limits. Hence, there is a demand for high performing, quasi real time solutions. Extensive prototyping of the new CERN monitoring and alarm software required us to address such expectations. The system must handle dozens of thousands of data samples every second, along its three tiers, applying complex computations throughout. To accomplish the goal, a deep understanding of multithreading, memory management and interprocess communication was required. There are unexpected traps hidden behind an excessive use of 64 bit memory or severe impact on the processing flow of modern garbage collectors. Tuning JVM configuration significantly affects the execution of the code. Even more important is the amount of threads and the data structures used between them. Accurately dividing work into independent tasks might boost system performance. Thorough profili...

Implementing digital instrumentation and control systems in the modernization of nuclear power plants

International Nuclear Information System (INIS)

2009-01-01

The IAEA encourages greater use of good engineering and management practices by Member States. In particular, it supports activities such as nuclear power plant (NPP) performance improvement, plant life management, training, power uprating, operational license renewal and the modernization of instrumentation and control (I and C) systems of NPPs in Member States. The subject of implementing digital I and C systems in nuclear power plants was suggested by the Technical Working Group on Nuclear Power Plant Control and Instrumentation (TWG-NPPCI) in 2003. It was then approved by the IAEA and included in the programmes for 2006-2008. As the current worldwide fleet of nuclear power plants continues ageing, the need for improvements to maintain or enhance plant safety and reliability is increasing. Upgrading NPP I and C systems is one of the possible approaches to achieving this improvement, and in many cases upgrades are a necessary activity for obsolescence management. I and C upgrades at operating plants require the use of digital I and C equipment. While modernizing I and C systems is a significant undertaking, it is an effective means to enhance plant safety and system functionality, manage obsolescence, and mitigate the increasing failure liability of ageing analog systems. Many of the planning and implementation tasks of a digital I and C upgrade project described here are also relevant to new plant design and construction since all equipment in new plants will be digital. This publication explains a process for planning and conducting an I and C modernization project. Numerous issues and areas requiring special consideration are identified, and recommendations on how to integrate the licensing authority into the process are made. To complement this report, a second publication is planned which will illustrate many of the aspects described here through experience based descriptions of I and C projects and lessons learned from those activities. It is upon these

Adaptive Backstepping Flight Control for Modern Fighter Aircraft

NARCIS (Netherlands)

Sonneveldt, L.

2010-01-01

The main goal of this thesis is to investigate the potential of the nonlinear adaptive backstepping control technique in combination with online model identification for the design of a reconfigurable flight control system for a modern fighter aircraft. Adaptive backstepping is a recursive,

Modern Embedded Computing Designing Connected, Pervasive, Media-Rich Systems

CERN Document Server

Barry, Peter

2012-01-01

Modern embedded systems are used for connected, media-rich, and highly integrated handheld devices such as mobile phones, digital cameras, and MP3 players. All of these embedded systems require networking, graphic user interfaces, and integration with PCs, as opposed to traditional embedded processors that can perform only limited functions for industrial applications. While most books focus on these controllers, Modern Embedded Computing provides a thorough understanding of the platform architecture of modern embedded computing systems that drive mobile devices. The book offers a comprehen

Modernization of turbine control system and reactor control system in Almaraz 1 and 2; MOdernizacion de los sistemas de control de turbina y del reactor en Almaraz 1 y 2

Energy Technology Data Exchange (ETDEWEB)

Pulido, C.; Diez, J.; Carrasco, J. A.; Lopez, L.

2005-07-01

The replacement of the Turbine Control System and Reactor Control System are part of the Almaraz modernization program for the Instrumentation and Control. For these upgrades Almaraz has selected the Ovation Platform that provides open architecture and easy expansion to other systems, these platforms is highly used in many nuclear and thermal plants around the world. One of the main objective for this project were to minimize the impact on the installation and operation of the plant, for that reason the project is implemented in two phases, Turbine Control upgrade and Reactor Control upgrade. Another important objective was to increase the reliability of the control system making them fully fault tolerant to single failures. The turbine Control System has been installed in Units 1 and 2 while the Reactor Control System will be installed in 2006 and 2007 outages. (Author)

Modern Control Design for Flexible Wind Turbines

Energy Technology Data Exchange (ETDEWEB)

Wright, A. D.

2004-07-01

Control can improve energy capture and reduce dynamic loads in wind turbines. In the 1970s and 1980s, wind turbines used classical control designs to regulate power and speed. The methods used, however, were not always successful. Modern turbines are larger, mounted on taller towers, and more dynamically active than their predecessors. Control systems to regulate turbine power and maintain stable, closed-loop behavior in the presence of turbulent wind inflow will be critical for these designs. This report applies modern state-space control design methods to a two-bladed teetering hub upwind machine at the National Wind Technology Center (NWTC), which is managed by the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) in Golden, Colorado. The design objective is to regulate turbine speed and enhance damping in several low-damped flexible modes of the turbine. Starting with simple control algorithms based on linear models, complexity is added incrementally until the desired performance is firmly established.

Adaptive Backstepping Sliding-Mode Control of the Electronic Throttle System in Modern Automobiles

Directory of Open Access Journals (Sweden)

Rui Bai

2014-01-01

Full Text Available In modern automobiles, electronic throttle is a DC-motor-driven valve that regulates air inflow into the vehicle’s combustion system. The electronic throttle is increasingly being used in order to improve the vehicle drivability, fuel economy, and emissions. Electronic throttle system has the nonlinear dynamical characteristics with the unknown disturbance and parameters. At first, the dynamical nonlinear model of the electronic throttle is built in this paper. Based on the model and using the backstepping design technique, a new adaptive backstepping sliding-mode controller of the electronic throttle is developed. During the backstepping design process, parameter adaptive law is designed to estimate the unknown parameter, and sliding-mode control term is applied to compensate the unknown disturbance. The proposed controller can make the actual angle of the electronic throttle track its set point with the satisfactory performance. Finally, a computer simulation is performed, and simulation results verify that the proposed control method can achieve favorable tracking performance.

Modernization of control system of the beam critical parameters at a lu-10 industrial electron accelerator

International Nuclear Information System (INIS)

Pomatsalyuk, R.I.; Uvarov, V.L.; Shevchenko, V.A.; Shlyakhov, I.N.

2017-01-01

Continuous control and monitoring of critical parameters of radiation processing of products is one of the requirements of the international standard ISO 11137. The current system to monitoring the parameters of radiation treatment of products at the LU-10 accelerator is being in operation for more than 15 years. The life-time of the mayor part of measuring modules is over, and those modules are no longer produced. Modernization of monitoring system with the use of the multi-functional USB modules, single-board mini-computers and EPICS control system (Experimental Physics and Industrial Control System) is considered. The architecture and software for a new monitoring system have been developed. Debugging and operation of the system in a test mode is performed

Modern trends of aircraft fly-by-wire systems

Directory of Open Access Journals (Sweden)

С. С. Юцкевич

2013-07-01

Full Text Available Specifics of civil aviation modern transport aircraft fly-by-wire control systems are described. A comparison of the systems-level hardware and software, expressed through modes of guidance, provision of aircraft Airbus A-320, Boeing B-777, Tupolev Tu-214, Sukhoi Superjet SSJ-100 are carried out. The possibility of transition from mechanical control wiring to control through fly-by-wire system in the backup channel is shown.

Development and implementation of documents control and records management system for KNPP units 5 and 6 modernization program

International Nuclear Information System (INIS)

Manchev, B.L.; Ilieva, M.; Nenkova, B. G. . E-mail of corresponding author: ilieva@riskeng.bg; Ilieva, M.)

2005-01-01

It was proposed to KNPP to develop and implement a Dcuments Control and Records Management System for an efficient and effective Configuration Management (CM) Program. It will provide reasonable assurance that consistency among design requirements, physical configuration and facility documentation is established and maintained during the Modernization Program and throughout the life of KNPP Units 5 and 6. The fully implemented CM Program will consider and track the modifications resulting from the Units 5 and 6 Modernization Program and will be consistent with internationally recognized principles and customized to fit within the KNPP organizational structure and philosophy (ANSI/NIRMA CM 1.0 - 2000, Configuration Management Of Nuclear Facilities). Development and implementation phase of Documents Control and Records Management System and SmartDoc information system, as well as ideas for further development are presented in this report. (author)

Performance analyses of the communication networks of a modern supervision and control system of research reactors

International Nuclear Information System (INIS)

El-Madbouly, E.I.; Shaat, M.K.; Shokr, A.M.; Elrefaei, G.H.

2009-01-01

The functions of the Instrumentation and Control (I and C) system in research reactors, the changes in its design according to the advances in the technology, and the internationally established safety requirements on the design and operational performance of this system are reviewed. The main features of the communication networks commonly used in the Supervision and Control systems (SCS) are presented. A methodology for the performance analysis of the communication networks of computer-based distributed SCS is developed and presented along with discussions. Application of this methodology to a modern SCS of a typical research reactor is illustrated. (orig.)

Performance analyses of the communication networks of a modern supervision and control system of research reactors

Energy Technology Data Exchange (ETDEWEB)

El-Madbouly, E.I. [Menoufia Univ., Menouf (Egypt). Faculty of Electronics Engineering; Shaat, M.K.; Shokr, A.M.; Elrefaei, G.H. [Atomic Energy Authority, Abouzabal (Egypt). Egypt Second Research Reactor

2009-04-15

The functions of the Instrumentation and Control (I and C) system in research reactors, the changes in its design according to the advances in the technology, and the internationally established safety requirements on the design and operational performance of this system are reviewed. The main features of the communication networks commonly used in the Supervision and Control systems (SCS) are presented. A methodology for the performance analysis of the communication networks of computer-based distributed SCS is developed and presented along with discussions. Application of this methodology to a modern SCS of a typical research reactor is illustrated. (orig.)

Control system of executive mechanisms of a spectrometer on the IBR-2 reactor as a modern local network of controllers CAN

International Nuclear Information System (INIS)

Zhuravlev, V.V.; Kirillov, A.S.; Petukhova, T.B.; Sirotin, A.P.

2007-01-01

Controllers SMC-32 and SMC-32-CAN as elements of control systems of executive mechanisms of the IBR-2 spectrometers are submitted. The controllers provide management of executive mechanisms of spectrometers on the consecutive communication line RS232, RS422 (SMC-32, SMC-32-CAN), and on the local network CAN (SMC-32-CAN). The control systems of the executive mechanisms are easily modernized due to connection of additional elements of the local network CAN. Dynamic characteristics of the spectrometers' executive mechanisms are essentially improved. For example, it has been possible to increase the rotation frequency of the step motor DSHI-200 up to 10000 pps. (author)

A Business Case for Nuclear Plant Control Room Modernization

International Nuclear Information System (INIS)

Thomas, Ken; Lawrie, Sean; Niedermuller, Josef M.

2016-01-01

This paper presents a generic business case for implementation of technology that supports Control Room Modernization (CRM). The analysis presented in two forms; 1) a standalone technology upgrade, and 2) a technology upgrade that is built upon and incremental to a prior business case created for Mobile Work Packages (MWP). The business case contends that advanced communication and networking and analytical technologies will allow NPP to conduct control room operations with improved focus by reducing human factors and redundant manpower, and therefore operate with fewer errors. While some labor savings can be harvested in terms of overtime, the majority of savings are demonstrated as reduced time to take the plant off line and bring back on line in support of outages. The benefits are quantified to a rough order of magnitude that provides directional guidance to NPPs that are interested in developing a similar business case. This business case focuses on modernization of the operator control room and does not consider a complete overhaul and modernization of a plants instrument and control systems. While operators may be considering such an investment at their plants, the sizable capital investment required is not likely supported by a cost/benefit analysis alone. More likely, it is driven by obsolescence and reliability issues, and requires consideration of mechanical condition of plant systems, capital depreciation, financing, relicensing and overall viability of the plant asset over a 20-year horizon in a competitive market. Prior studies [REF] have indicated that such a modernization of plant I&C systems, alone or as part of a larger modernization effort, can yield very significant reductions in O&M costs. However, the depth of research and analysis required to develop a meaningful business case for a plant modernization effort is well beyond the scope of this study. While CRM as considered in this study can be easily integrated as part of grander plant

A Business Case for Nuclear Plant Control Room Modernization

Energy Technology Data Exchange (ETDEWEB)

Thomas, Ken [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lawrie, Sean [Idaho National Lab. (INL), Idaho Falls, ID (United States); Niedermuller, Josef M. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2016-06-01

This paper presents a generic business case for implementation of technology that supports Control Room Modernization (CRM). The analysis presented in two forms; 1) a standalone technology upgrade, and 2) a technology upgrade that is built upon and incremental to a prior business case created for Mobile Work Packages (MWP). The business case contends that advanced communication and networking and analytical technologies will allow NPP to conduct control room operations with improved focus by reducing human factors and redundant manpower, and therefore operate with fewer errors. While some labor savings can be harvested in terms of overtime, the majority of savings are demonstrated as reduced time to take the plant off line and bring back on line in support of outages. The benefits are quantified to a rough order of magnitude that provides directional guidance to NPPs that are interested in developing a similar business case. This business case focuses on modernization of the operator control room and does not consider a complete overhaul and modernization of a plants instrument and control systems. While operators may be considering such an investment at their plants, the sizable capital investment required is not likely supported by a cost/benefit analysis alone. More likely, it is driven by obsolescence and reliability issues, and requires consideration of mechanical condition of plant systems, capital depreciation, financing, relicensing and overall viability of the plant asset over a 20-year horizon in a competitive market. Prior studies [REF] have indicated that such a modernization of plant I&C systems, alone or as part of a larger modernization effort, can yield very significant reductions in O&M costs. However, the depth of research and analysis required to develop a meaningful business case for a plant modernization effort is well beyond the scope of this study. While CRM as considered in this study can be easily integrated as part of grander plant

Selection of input devices and controls for modern process control consoles

International Nuclear Information System (INIS)

Hasenfuss, O.; Zimmermann, R.

1975-06-01

In modern process control consoles man-machine communication is realized more and more by computer driven CRT displays, the most efficient communication system today. This paper describes the most important input devices and controls for such control consoles. A certain number of facts are given, which should be considered during the selection. The aptitude of the described devices for special tasks is discussed and recommendations are given for carrying out a selection. (orig.) [de

Design and modernization of the control room with of the new digital I and C systems

International Nuclear Information System (INIS)

Fernandez, L. A.; Ortega, F.; Rejas, L.

2011-01-01

The use of the new digital I and c systems in the design of the new nuclear power plants, as well as the modernization of the existing ones, implies relevant changes in the control room design. New I and C systems provide new features that affect the control room operating concept, therefore a detailed analysis is required to take into consideration all the operating and human factor aspects. based on Tecnatom's experience, this article presents the methodological approach used as well as the most relevant aspects of this kind of project. (Author)

Modern control room for AHWR

International Nuclear Information System (INIS)

Verghese, Clement C.; Joseph, Jose; Biswas, B.B.; Patil, R.K.

2005-01-01

Advanced Heavy Water Reactor (AHWR) is a next generation nuclear power plant being developed by Bhabha Atomic Research Centre. A modern control room has been conceived for operation and monitoring of the plant in tune with the advanced features of the reactor. A state of the art C and I architecture based on extensive use of computers and networking has been conceived for this plant. This architecture enables the implementation of a fully computerised operator friendly control room with soft HMIs. Features of the modern control room and control room and concept of soft HMI based operator interfaces have been described in the paper. (author)

Proceedings: Electromagnetic interference control in modern digital instrumentation and control upgrades

International Nuclear Information System (INIS)

1993-06-01

A workshop on Electro-Magnetic Interference (EMI) Control in Modern Digital Instrumentation ampersand Control System Upgrade was held in Baltimore on September 10-11, 1992 to provide a forum for technology transfer, technical information exchange, and education. The workshop was attended by more than 70 representatives of electric utilities, equipment manufacturers, engineering consulting organizations, and government agencies. The workshop consists of four sessions: (1) Organizational EMC Perspectives, (2) EMI Environment, Case Histories ampersand Solutions, (3) EMC in Digital Instrumentation ampersand Control Systems, and (4) EMI Utility Needs. A group discussion followed the presentations to identify utility needs. Individual papers have been cataloged separately

A HUMAN FACTORS ENGINEERING PROCESS TO SUPPORT HUMAN-SYSTEM INTERFACE DESIGN IN CONTROL ROOM MODERNIZATION

Energy Technology Data Exchange (ETDEWEB)

Kovesdi, C.; Joe, J.; Boring, R.

2017-05-01

The primary objective of the United States (U.S.) Department of Energy (DOE) Light Water Reactor Sustainability (LWRS) program is to sustain operation of the existing commercial nuclear power plants (NPPs) through a multi-pathway approach in conducting research and development (R&D). The Advanced Instrumentation, Information, and Control (II&C) System Technologies pathway conducts targeted R&D to address aging and reliability concerns with legacy instrumentation and control (I&C) and other information systems in existing U.S. NPPs. Control room modernization is an important part following this pathway, and human factors experts at Idaho National Laboratory (INL) have been involved in conducting R&D to support migration of new digital main control room (MCR) technologies from legacy analog and legacy digital I&C. This paper describes a human factors engineering (HFE) process that supports human-system interface (HSI) design in MCR modernization activities, particularly with migration of old digital to new digital I&C. The process described in this work is an expansion from the LWRS Report INL/EXT-16-38576, and is a requirements-driven approach that aligns with NUREG-0711 requirements. The work described builds upon the existing literature by adding more detail around key tasks and decisions to make when transitioning from HSI Design into Verification and Validation (V&V). The overall objective of this process is to inform HSI design and elicit specific, measurable, and achievable human factors criteria for new digital technologies. Upon following this process, utilities should have greater confidence with transitioning from HSI design into V&V.

Towards high performance processing in modern Java-based control systems

International Nuclear Information System (INIS)

Misiowiec, M.; Buczak, W.; Buttner, M.

2012-01-01

CERN controls software is often developed on Java foundation. Some systems carry out a combination of data, network and processor intensive tasks within strict time limits. Hence, there is a demand for high performing, quasi real time solutions. The system must handle dozens of thousands of data samples every second, along its three tiers, applying complex computations throughout. To accomplish the goal, a deep understanding of multi-threading, memory management and inter process communication was required. There are unexpected traps hidden behind an excessive use of 64 bit memory or severe impact on the processing flow of modern garbage collectors. Tuning JVM configuration significantly affects the execution of the code. Even more important is the amount of threads and the data structures used between them. Accurately dividing work into independent tasks might boost system performance. Thorough profiling with dedicated tools helped understand the bottlenecks and choose algorithmically optimal solutions. Different virtual machines were tested, in a variety of setups and garbage collection options. The overall work provided for discovering actual hard limits of the whole setup. We present this process of designing a challenging system in view of the characteristics and limitations of the contemporary Java run-time environment. (authors)

Challenges for maintaining the modernization of instrumentation and control systems; Desafios para el mantenimiento en la modernizacion de sistemas de instrumentacion y control

Energy Technology Data Exchange (ETDEWEB)

Rojas, V.

2014-04-01

Instrumentation and control system upgrades in nuclear power plants come with some challenges for their maintenance staff. It is important to have a long term modernization plant that derives from specific studies for each system. Training, spares, configuration control and cybersecurity are critical topics to take into account from the beginning of these projects. New system maintenance plans can require a new approach in accordance with the technology. FPGAs (Field Programmable Gate Array) appear as the alternative for the future, mainly in safety systems. (Author)

Account of requirements for modernization in VPBER-600 enhanced safety reactor instrumentation and control system development

International Nuclear Information System (INIS)

Shashkin, S.L.; Pobedonostsev, A.B.; Drumov, V.V.; Chudin, A.G.

1993-01-01

Nuclear power plant (NPP) with VPBER-600 reactor is a station of new generation. The specified term of reactor plant operation is 60 years and taking into account that the proposed term of starting the first power unit is on the turn of centuries one can definitely state that for Russia conditions VPBER-600 is a plant of 21 century. Such far removed term for NPP now in the stage of development as it can seem does not put the problems of modernization as first order tasks. But open-quotes...who does not think about future lives in the past.close quotes It is that the NPP instrumentation and control (I ampersand C) systems are in the most degree subjected to the influence of factors which favor their modifications. These factors can be arbitrarily divided into two groups: (1) inner factors, i.e. changes (failures, aging, etc) in I ampersand C components as well as changes dictated by technological reasons (change of equipment composition, control algorithms, operation modes); (2) outer factors, i.e. intensive development of information technologies and rapid improvement of electronic components. This presentation addresses the problem of modernization of the safety instrumentation for this next generation facility, and the research effort it will entail. The system is designed to allow for modernization, and the relatively easy adoption of new instrumentation and technology as it becomes available

Application of modern control theory to HTGR-plant

International Nuclear Information System (INIS)

Izaki, Makoto; Kubo, Hiroaki; Yamazaki, Eiji; Suzuki, Katsuo.

1988-01-01

The classical control theory approach to the multivariate control problem is to decouple the system intentionally and to treat each loop independently. As a result, final control system design is limited in complexity by the available mathematical techniques limitation and it's control performance is insufficient in many cases. The modern control theory approach based on the state variables to the problem provides far more powerful methods and more design flexibility than the classical control theory approach by the new mathematical formulation about the problem. The state variable feedback in formulating as an optimal regulator is the most effective way to obtain the desired control performance. In this report, some results of optimal regulator application to High Temperature Gas Cooled Reactor (HTGR) are shown. (author)

Modern control technology for improved nuclear reactor performance

International Nuclear Information System (INIS)

Oakes, L.C.

1986-01-01

One of the main complaints leveled at reactor control systems by utility spokesmen is complexity. One only has to look inside a power reactor control room to appreciate this viewpoint. The high reliability and versatility of modern microprocessors makes possible distributed control systems with only performance data and abnormal conditions being relayed to the control room. In a sense, this emulates the human-body control system where routine repetitive actions are handled in an involuntary manner. The significance of expert systems to the nuclear reactor control and safety systems is their ability to capture human and other expertise and make it available, upon demand, and under almost all circumstances. Thus, human problem-solving skills acquired by the learning process over a long period of time can be captured and employed with the reliability inherent in computers. This is especially important in nuclear plants when human operators are burdened by stress and emotional factors that have a dramatic effect on performance level

Design and modernization of control rooms according to new I and C systems based on HFE principles

International Nuclear Information System (INIS)

Rejas, Luis; Larraz, Javier; Ortega, Fernando

2011-01-01

The use of new digital I and C systems in the design of new nuclear power plants, as well as the modernization of existing facilities, implies relevant changes in the control room design. New I and C systems provide new features that affect the control room operating concept. Therefore, a detailed analysis is required to take into consideration all the operating and human factors aspects. Based on Tecnatom experience in the field, this article presents the methodological approach used as well as the most relevant aspects of this kind of project. (author)

Design and modernization of control rooms according to new I and C systems based on HFE principles

Energy Technology Data Exchange (ETDEWEB)

Rejas, Luis; Larraz, Javier, E-mail: lrejas@tecnatom.e, E-mail: jlarraz@tecnatom.e [Tecnatom S.A., San Sebastian de los Reyes, Madrid (Spain). New Control Room Design Dept.; Ortega, Fernando, E-mail: fortega@tecnatom.e [Tecnatom S.A., San Sebastian de los Reyes, Madrid (Spain). Control Room and Simulation Dept.

2011-07-01

The use of new digital I and C systems in the design of new nuclear power plants, as well as the modernization of existing facilities, implies relevant changes in the control room design. New I and C systems provide new features that affect the control room operating concept. Therefore, a detailed analysis is required to take into consideration all the operating and human factors aspects. Based on Tecnatom experience in the field, this article presents the methodological approach used as well as the most relevant aspects of this kind of project. (author)

US NDC Modernization Iteration E1 Prototyping Report: Processing Control Framework

Energy Technology Data Exchange (ETDEWEB)

Prescott, Ryan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hamlet, Benjamin R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2014-12-01

During the first iteration of the US NDC Modernization Elaboration phase (E1), the SNL US NDC modernization project team developed an initial survey of applicable COTS solutions, and established exploratory prototyping related to the processing control framework in support of system architecture definition. This report summarizes these activities and discusses planned follow-on work.

Modernization of the Control Systems of High-Frequency, Brush-Free, and Collector Exciters of Turbogenerators

Energy Technology Data Exchange (ETDEWEB)

Popov, E. N., E-mail: enpo@ruselmash.ru; Komkov, A. L.; Ivanov, S. L.; Timoshchenko, K. P. [JSC “Scientific and Industrial Enterprise “Rusélprom-Élektromash” (Russian Federation)

2016-11-15

Methods of modernizing the regulation systems of electric machinery exciters with high-frequency, brush-free, and collector exciters by means of microprocessor technology are examined. The main problems of modernization are to increase the response speed of a system and to use a system stabilizer to increase the stability of the power system.

Advanced system for Gamma Cameras modernization

International Nuclear Information System (INIS)

Osorio Deliz, J. F.; Diaz Garcia, A.; Arista Romeu, E. J.

2015-01-01

Analog and digital gamma cameras still largely used in developing countries. Many of them rely in old hardware electronics, which in many cases limits their use in actual nuclear medicine diagnostic studies. Consequently, there are different worldwide companies that produce medical equipment engaged into a partial or total Gamma Cameras modernization. Present work has demonstrated the possibility of substitution of almost entire signal processing electronics placed at inside a Gamma Camera detector head by a digitizer PCI card. this card includes four 12 Bits Analog-to-Digital-Converters of 50 MHz speed. It has been installed in a PC and controlled through software developed in Lab View. Besides, there were done some changes to the hardware inside the detector head including redesign of the Orientation Display Block (ODA card). Also a new electronic design was added to the Microprocessor Control Block (MPA card) which comprised a PIC micro controller acting as a tuning system for individual Photomultiplier Tubes. The images, obtained by measurement of 99m Tc point radioactive source, using modernized camera head demonstrate its overall performance. The system was developed and tested in an old Gamma Camera ORBITER II SIEMENS GAMMASONIC at National Institute of Oncology and Radiobiology (INOR) under CAMELUD project supported by National Program PNOULU and IAEA . (Author)

Modern systems of instrumentation and control of FRAMATOME ANP: instrument to the future

International Nuclear Information System (INIS)

Kraft, U.; Richter, S.

2003-01-01

Based on the applications of the TELEPERM XS and XP platforms, experience with these operating and safety I and C system in nuclear plants both in Europe and abroad is described here. To quote information from customers in the nuclear field, the positive results can be confirmed by specific nuclear plants from all over the world, so that with the application of these new digitial platforms alternatives exist for quasi all types of nuclear plant. The TELEPERM XS and XP system families can be easily applied for modernization projects for existing I and C systems, resulting in a high degree of availability and economic advantages, in accordance with modern technology. In order to demonstrate to the readers of this article the status of development of the TELEPERM XS safety I and C system, further important information regarding the general characteristics, to the architecture of the hardware and the engineering process as well as the development of the software is given. In this way one can obtain a general idea of the TELEPERM XS system as well as an outlook combined with the successful application of this modern safety I and C system for nuclear plants world wide. (Author)

Operator support through modern optimal estimation and control

International Nuclear Information System (INIS)

Burdick, G.R.

1980-01-01

Applications of Modern Optimal Estimation and Control Theories are late in coming to the nuclear industry. Some features of the theories that might be exploited in nuclear systems applications are described. Activities at the Idaho National Engineering Laboratory relating to operator support using those theories are identified and some implementation challenges are discussed

MODERN AND PERSPECTIVE ON-BOARD NTELLECTUAL TRANSPORT SYSTEMS

Directory of Open Access Journals (Sweden)

V. Topalidi

2011-01-01

Full Text Available For the purpose of systematization of modern and perspective intellectual transport sides systems (ITВS it is suggested their classification and planning of new ITВS for realization of safety control of vehicle technical condition.

Control room modernization at Finnish nuclear power plants - Two projects compared

International Nuclear Information System (INIS)

Laarni, J.; Norros, L.

2006-01-01

The modernization of automation systems and human-machine interfaces is a current issue at both of the two nuclear power plants (i.e., Fortum's Loviisa plant and TVO's Olkiluoto plant) in Finland. Since the plants have been launched in the 1970's or 1980's, technology is in part old-fashioned and needs to be renewed. At Olkiluoto upgrades of the turbine operator systems have already been conducted; at Loviisa the first phase of the modernization project has just started. Basically, there is a question of the complete digitalization of the information streams at the two plants, and transition from a conventional hard-wired or hybrid control room to a screen-based one. The new human-machine interfaces will comprise new technology, such as PC workstations, soft control, touch screens and large-screen overall displays. The modernization of human-system interfaces is carried out in a stepwise manner at both plants. At both plants the main driver has not been the need to renew the user interfaces of the control room, but the need to upgrade the automation systems. In part because of this, there is a lack of a systematic top-down approach in which different aspects of human factors (HF) engineering are considered in relationship to higher level goals. Our aim here is to give an overview description of the control room modernization projects at the two plants and provide a preliminary evaluation of their progress to date. The projects are also compared, for example, in terms of duration, scope and phasing, and who is responsible for the realization of the project. In addition, we also compare experiences from the Finnish projects to experiences from similar projects abroad. The main part of the data used in this study is based on designers' and project members' interviews. (authors)

Current Approaches for Control Room I and C Modernization

International Nuclear Information System (INIS)

Lopez, Alberto; Jimenez, Alfonso

2002-01-01

In general, instrumentation and control (I and C) systems for nuclear power plants were made using analogic systems and relays, since this was the only technology available by the time these systems were designed. This fact impacts on the operational and maintenance capabilities required to these systems. For this reason, nuclear power plants are facing nowadays two challenges: on one hand, the obsolescence of these systems contributes to the increase in the operation and maintenance costs - due to the difficulties for getting spare parts and support from the system vendors -. On the other hand, there has been an increase in the utilities competitiveness due to the electric power market liberalization. All this, of course, along with the commitment to maintain the current safety levels and meet the new requirements and standards that may arise in the near future. The application of current technologies, especially digital technology, solves the obsolescence problems and allows for a more functional and updated human-machine interface. Nevertheless, the cost associated to these modifications makes it necessary to develop strategies to determine which systems need to be modified and how to implement modifications effectively, so that these systems can work jointly with others using different technologies. Other issues inherent to digital technology must be considered, such as verification and validation of the software and of the human-machine interface, which are required for its licensing. This presentation describes the current approaches for I and C modernization, the main reasons, technologies and implementation plans, focusing on the control room and on the impact on operations. The main issues to be considered for developing a specific modernization plan are analysed. The goals and status of the 'Feasibility Study of the Control Room I and C Modernization' are described. This study is currently being developed by Endesa, Iberdrola and Tecnatom, and is included

Experiences in the application of human factors engineering to human-system interface modernization

International Nuclear Information System (INIS)

Trueba Alonso, Pedro; Illobre, Luis Fernandez; Ortega Pascual, Fernando

2014-01-01

Almost all the existing Nuclear Power Plants (NPPs) include plans to modernize their existing Instrumentation and Control (I and C) systems and associated Human System Interfaces (HSIs), due to obsolescence problems. Tecnatom, S.A. has been participating in modernization programs in NPPs to help them to plan, specify, design and implement the modernization of control rooms and associated I and C and HSIs. The application of Human Factors Engineering (HFE) in modernization programs is nowadays unavoidable. This is because is becoming a regulatory requirement, and also because it is needed to ensure that any plant modification, involving the modernization of I and C and HSI, is well designed to improve overall plant operations, reliability, and safety. This paper shows some experiences obtained during the application of HFE to the modernization of these HSIs. The experience applying HFE in modernizations and design modifications show a positive effect, improving the associated HSIs, with the acceptability of the final user. (authors)

Experiences in the application of human factors engineering to human-system interface modernization

International Nuclear Information System (INIS)

Trueba Alonso, Pedro; Fernandez Illobre, Luis; Ortega Pascual, Fernando

2015-01-01

Almost all the existing Nuclear Power Plants (NPPs) include plans to modernize their existing Instrumentation and Control (I and C) systems and associated Human System Interfaces (HSIs), due to obsolescence problems. Tecnatom, S.A. has been participating in modernization programs in NPPs to help them to plan, specify, design and implement the modernization of control rooms and associated I and C and HSIs. The application of Human Factors Engineering (HFE) in modernization programs is nowadays unavoidable. This is because is becoming a regulatory requirement, and also because it is needed to ensure that any plant modification, involving the modernization of I and C and HSI, is well designed to improve overall plant operations, reliability, and safety. This paper shows some experiences obtained during the application of HFE to the modernization of these HSIs. The experience applying HFE in modernizations and design modifications show a positive effect, improving the associated HSIs, with the acceptability of the final user.

Experiences in the application of human factors engineering to human-system interface modernization

Energy Technology Data Exchange (ETDEWEB)

Trueba Alonso, Pedro; Fernandez Illobre, Luis; Ortega Pascual, Fernando [Tecnatom S.A., San Sebastian de los Reyes (Spain). Simulation and Control Rooms Div.

2015-07-15

Almost all the existing Nuclear Power Plants (NPPs) include plans to modernize their existing Instrumentation and Control (I and C) systems and associated Human System Interfaces (HSIs), due to obsolescence problems. Tecnatom, S.A. has been participating in modernization programs in NPPs to help them to plan, specify, design and implement the modernization of control rooms and associated I and C and HSIs. The application of Human Factors Engineering (HFE) in modernization programs is nowadays unavoidable. This is because is becoming a regulatory requirement, and also because it is needed to ensure that any plant modification, involving the modernization of I and C and HSI, is well designed to improve overall plant operations, reliability, and safety. This paper shows some experiences obtained during the application of HFE to the modernization of these HSIs. The experience applying HFE in modernizations and design modifications show a positive effect, improving the associated HSIs, with the acceptability of the final user.

Early Modern Philosophical Systems

NARCIS (Netherlands)

L. van Bunge (Wiep)

2014-01-01

textabstractThe occurrence of an entry on early modern philosophical systems in an encyclopaedia of Neo-Latin studies is fraught with complications, if only on account of the gradual disappearance during the early modern period of Latin as the main vehicle of philosophical communication. What

Modern operating systems

CERN Document Server

Tanenbaum, Andrew S

2015-01-01

Modern Operating Systems, Fourth Edition, is intended for introductory courses in Operating Systems in Computer Science, Computer Engineering, and Electrical Engineering programs. It also serves as a useful reference for OS professionals ' The widely anticipated revision of this worldwide best-seller incorporates the latest developments in operating systems (OS) technologies. The Fourth Edition includes up-to-date materials on relevant'OS. Tanenbaum also provides information on current research based on his experience as an operating systems researcher. ' Modern Operating Systems, Third Editionwas the recipient of the 2010 McGuffey Longevity Award. The McGuffey Longevity Award recognizes textbooks whose excellence has been demonstrated over time.'http://taaonline.net/index.html " Teaching and Learning Experience This program will provide a better teaching and learning experience-for you and your students. It will help: ' *Provide Practical Detail on the Big Picture Concepts: A clear and entertaining writing s...

Using a Research Simulator for Validating Control Room Modernization Concepts

International Nuclear Information System (INIS)

Boring, Ronald L.; Agarwal, Vivek; Persensky, Julius J.; Joe, Jeffrey C.

2012-01-01

The Light Water Reactor Sustainability Program is a research, development, and deployment program sponsored by the United States Department of Energy. The program is operated in close collaboration with industry research and development programs to provide the technical foundations for licensing and managing the long-term, safe, and economical operation of nuclear power plants that are currently in operation. Advanced instrumentation and control (I and C) technologies are needed to support the continued safe and reliable production of power from nuclear energy systems during sustained periods of operation up to and beyond their expected licensed lifetime. This requires that new capabilities to achieve process control be developed and eventually implemented in existing nuclear control rooms. It also requires that approaches be developed and proven to achieve sustainability of I and C systems throughout the period of extended operation. Idaho National Laboratory (INL) is working closely with nuclear utilities to develop technologies and solutions to help ensure the safe life extension of current reactors. One of the main areas of focus is control room modernization. Current analog control rooms are growing obsolete, and it is difficult for utilities to maintain them. Using its reconfigurable control room simulator adapted from a training simulator, INL serves as a neutral test bed for implementing new control room system technologies and assisting in control room modernization efforts across. (author)

Using a Research Simulator for Validating Control Room Modernization Concepts

Energy Technology Data Exchange (ETDEWEB)

Ronald L. Boring; Vivek Agarwal; Julius J. Persensky; Jeffrey C. Joe

2012-05-01

The Light Water Reactor Sustainability Program is a research, development, and deployment program sponsored by the United States Department of Energy. The program is operated in close collaboration with industry research and development programs to provide the technical foundations for licensing and managing the long-term, safe, and economical operation of nuclear power plants that are currently in operation. Advanced instrumentation and control (I&C) technologies are needed to support the continued safe and reliable production of power from nuclear energy systems during sustained periods of operation up to and beyond their expected licensed lifetime. This requires that new capabilities to achieve process control be developed and eventually implemented in existing nuclear control rooms. It also requires that approaches be developed and proven to achieve sustainability of I&C systems throughout the period of extended operation. Idaho National Laboratory (INL) is working closely with nuclear utilities to develop technologies and solutions to help ensure the safe life extension of current reactors. One of the main areas of focus is control room modernization. Current analog control rooms are growing obsolete, and it is difficult for utilities to maintain them. Using its reconfigurable control room simulator adapted from a training simulator, INL serves as a neutral test bed for implementing new control room system technologies and assisting in control room modernization efforts across.

Requirements for a modern process control system (PLS); Anforderungen an ein modernes Prozessleitsystem (PLS)

Energy Technology Data Exchange (ETDEWEB)

Maurer, Michael [SAR Elektronic GmbH, Dingolfing (Germany)

2012-11-01

The process control system is of crucial importance for the process management of process engineering systems. The process control system has to enable the operation and surveillance of processes, to register critical process conditions and to provide process data for the evaluation of processes. The process control system delivers real time process data to superior process engineering systems (MES, ERP) and implements control commands of superior systems on the plant. The market of process control engineering systems is characterized by a variety of different systems, most different project specific and customer specific configurations as well as different releases. Control systems are in competition to programmable logic controllers and black boxes. The satisfaction of the user with his process control system depends significantly on the attained quality of execution of the supplying company and the used power plant library. It does not depend on the chosen brand of process control system. The availability of process control systems depends on the chosen system architecture and the chosen components, but not from the brand of process control system.

Power system stabilizers based on modern control techniques

Energy Technology Data Exchange (ETDEWEB)

Malik, O P; Chen, G P; Zhang, Y; El-Metwally, K [Calgary Univ., AB (Canada). Dept. of Electrical and Computer Engineering

1994-12-31

Developments in digital technology have made it feasible to develop and implement improved controllers based on sophisticated control techniques. Power system stabilizers based on adaptive control, fuzzy logic and artificial networks are being developed. Each of these control techniques possesses unique features and strengths. In this paper, the relative performance of power systems stabilizers based on adaptive control, fuzzy logic and neural network, both in simulation studies and real time tests on a physical model of a power system, is presented and compared to that of a fixed parameter conventional power system stabilizer. (author) 16 refs., 45 figs., 3 tabs.

Modern control systems in the combined-cycle power plant `Salinenstrasse` of Stadtwerke Schwaebisch Hall GmbH; Einsatz moderner Kraftwerksleittechnik im GuD-Kraftwerk Salinenstrasse der Stadtwerke Schwaebisch Hall GmbH

Energy Technology Data Exchange (ETDEWEB)

Breuning, P [Stadtwerke Schwaebisch Hall GmbH (Germany); Menschel, M [Stadtwerke Schwaebisch Hall GmbH (Germany); Friedrich, G [IDS Gesellschaft fuer Informations-, Datenuebertragungs- und Steuerungssysteme mbH, Karlsruhe (Germany); Radtke, W [IDS Gesellschaft fuer Informations-, Datenuebertragungs- und Steuerungssysteme mbH, Karlsruhe (Germany)

1994-11-14

Run-of-river power plants, CHP systems and heating power stations produce much of the heat and power consumed in the supply area of the Stadtwerke Schwaebisch Hall. The most recent component is a modern combined-cycle power station based on a reconstructed steam power plant commissioned in 1935. Modern control systems supplied by IDS Karlsruhe ensure optimal grid and power plant operation. (orig.) [Deutsch] Laufwasser-Kraftwerke, BHKW und Heizkraftwerke decken einen grossen Teil des Bedarfs an Waerme und Energie im Versorgungsgebiet der Stadtwerke Schwaebisch Hall. Vor kurzem ist hier als weitere Komponente ein modernes GuD-Kraftwerk in Betrieb genommen worden. Um ein bestehendes, bereits 1935 erbautes Dampfkraftwerk wirtschaftlicher nutzen zu koennen, haben die Stadtwerke Schwaebisch Hall den Umbau zum GuD-Kraftwerk vorgenommen. Durch den Einsatz der von IDS Karlsruhe gelieferten Kraftwerksleittechnik, verbunden mit einem modernen Netzleitsystem wird eine optimale Netz- und Kraftwerksfuehrung ermoeglicht. (orig.)

Instrumentation and control balancing the risks and benefits of modernization

International Nuclear Information System (INIS)

Doshi, P.K.; Rawlins, D.H.; Falascino, J.A.

1996-01-01

This paper examines the benefits and risks of modernization of instrumentation and control (I and C) systems for nuclear power plants. It will draw conclusions on how to proceed with such modernization across the spectrum from operating reactors to new plant designs. Lessons learned from Westinghouse's application of digital systems to the Temelin Nuclear Power Plant in the Czech Republic, and other nuclear plant upgrades will be used to support principles and conclusions drawn in the paper. A long term view of the modernization program is essential, even if piecemeal or individual upgrades are envisioned. A framework for considering these risks and goals into a long range strategic plan will be presented. The framework will be presented in the form of I and C architectures which permit long term growth, planning ahead for technological obsolescence, selectron of suppliers for term relationships, and effective integration of individual upgrades. Potential upgrade areas will be summarized for functional improvements, I and C hardware upgrades, and man-machine interface improvements. Examples from Westinghouse's I and C experience will be presented to clarify the principles and framework described in the paper. Lessons learned from the application of the Eagle product line to operating reactors and the emergence of distributed computer information systems as an integration vehicle for I and C upgrades will be discussed. Westinghouse is currently modernizing the Temelin Nuclear Power Plant I and C system in the Czech Republic. An overview of this program will be included as it relates to the modernization framework presented in the paper. (authors)

Solar charge regulator and operation management for PV island systems with modern memory-programmable control (SPS); Solarladeregler und Betriebsmanagement fuer PV-Inselsysteme mit moderner Speicherprogrammierbarer Steuerung (SPS)

Energy Technology Data Exchange (ETDEWEB)

Dohlen, K. v.; Nussberger, B. [ENNOS Gesellschaft fuer Innovative Energiesysteme mbH, Freiburg (Germany)

1998-12-01

Modern memory programmable controls (SPS) are good value for money, powerful and have such a low power consumption that they are suitable for control and regulation purposes in PV island systems. The development of the solar charge regulators and operation management on the basis of an SPS shown in the article was carried out with the super-imposed target of increasing the use of proven standard industrial products in their construction and simplifying their operation and raising their reliability. [Deutsch] Moderne Speicherprogrammierbare Steuerungen (SPS) sind preiswert, leistungsfaehig und besitzen inzwischen eine so niedrige Leistungsaufnahme, dass sie zu Steuer- und Regelzwecken in PV-Inselsystemen geeignet sind. Die Entwicklung des im Beitrag vorgestellten Solarladereglers und Betriebsmanagement auf der Basis einer SPS stand unter der uebergeordneten Zielsetzung, PV-Anlagen durch den Einsatz von bewaehrten Standard-Industrieprodukten in ihrem Aufbau und der Bedienung zu vereinfachen und in ihrer Zuverlaessigkeit zu steigern. (orig.)

Terminal area automatic navigation, guidance and control research using the Microwave Landing System (MLS). Part 5: Design and development of a Digital Integrated Automatic Landing System (DIALS) for steep final approach using modern control techniques

Science.gov (United States)

Halyo, N.

1983-01-01

The design and development of a 3-D Digital Integrated Automatic Landing System (DIALS) for the Terminal Configured Vehicle (TCV) Research Aircraft, a B-737-100 is described. The system was designed using sampled data Linear Quadratic Gaussian (LOG) methods, resulting in a direct digital design with a modern control structure which consists of a Kalman filter followed by a control gain matrix, all operating at 10 Hz. DIALS uses Microwave Landing System (MLS) position, body-mounted accelerometers, as well as on-board sensors usually available on commercial aircraft, but does not use inertial platforms. The phases of the final approach considered are the localizer and glideslope capture which may be performed simultaneously, localizer and steep glideslope track or hold, crab/decrab and flare to touchdown. DIALS captures, tracks and flares from steep glideslopes ranging from 2.5 deg to 5.5 deg, selected prior to glideslope capture. Digital Integrated Automatic Landing System is the first modern control design automatic landing system successfully flight tested. The results of an initial nonlinear simulation are presented here.

Wide Area Measurement Based Security Assessment & Monitoring of Modern Power System: A Danish Power System Case Study

DEFF Research Database (Denmark)

Rather, Zakir Hussain; Chen, Zhe; Thøgersen, Paul

2013-01-01

Power System security has become a major concern across the global power system community. This paper presents wide area measurement system (WAMS) based security assessment and monitoring of modern power system. A new three dimensional security index (TDSI) has been proposed for online security...... monitoring of modern power system with large scale renewable energy penetration. Phasor measurement unit (PMU) based WAMS has been implemented in western Danish Power System to realize online security monitoring and assessment in power system control center. The proposed security monitoring system has been...

Project Management Using Modern Guidance, Navigation and Control Theory

Science.gov (United States)

Hill, Terry

2010-01-01

The idea of control theory and its application to project management is not new, however literature on the topic and real-world applications is not as readily available and comprehensive in how all the principals of Guidance, Navigation and Control (GN&C) apply. This paper will address how the fundamental principals of modern GN&C Theory have been applied to NASA's Constellation Space Suit project and the results in the ability to manage the project within cost, schedule and budget. A s with physical systems, projects can be modeled and managed with the same guiding principles of GN&C as if it were a complex vehicle, system or software with time-varying processes, at times non-linear responses, multiple data inputs of varying accuracy and a range of operating points. With such systems the classic approach could be applied to small and well-defined projects; however with larger, multi-year projects involving multiple organizational structures, external influences and a multitude of diverse resources, then modern control theory is required to model and control the project. The fundamental principals of G N&C stated that a system is comprised of these basic core concepts: State, Behavior, Control system, Navigation system, Guidance and Planning Logic, Feedback systems. The state of a system is a definition of the aspects of the dynamics of the system that can change, such as position, velocity, acceleration, coordinate-based attitude, temperature, etc. The behavior of the system is more of what changes are possible rather than what can change, which is captured in the state of the system. The behavior of a system is captured in the system modeling and if properly done, will aid in accurate system performance prediction in the future. The Control system understands the state and behavior of the system and feedback systems to adjust the control inputs into the system. The Navigation system takes the multiple data inputs and based upon a priori knowledge of the input

Modernization of supervision and control central store of the Cabril RBMA

International Nuclear Information System (INIS)

Arribas de la Fuente, M.; Mena, V.; Navarro Santos, M.

2012-01-01

The modernization of the control room Cabril through the use of new technology has allowed the unification of control and monitoring of all systems of the center, giving the Cabril greater versatility and ease of development operations the plant, as well as enabling the expansion and continuous improvement is promoting the installation from the beginning of its activity.

Modernizing computerized nuclear material accounting systems

International Nuclear Information System (INIS)

Erkkila, B.H.; Claborn, J.

1995-01-01

DOE Orders and draft orders for nuclear material control and accountability address a complete material control and accountability (MC and A) program for all DOE contractors processing, using, or storing nuclear materials. A critical element of an MC and A program is the accounting system used to track and record all inventories of nuclear material and movements of materials in those inventories. Most DOE facilities use computerized accounting systems to facilitate the task of accounting for all their inventory of nuclear materials. Many facilities still use a mixture of a manual paper system with a computerized system. Also, facilities may use multiple systems to support information needed for MC and A. For real-time accounting it is desirable to implement a single integrated data base management system for a variety of users. In addition to accountability needs, waste management, material management, and production operations must be supported. Information in these systems can also support criticality safety and other safety issues. Modern networked microcomputers provide extensive processing and reporting capabilities that single mainframe computer systems struggle with. This paper describes an approach being developed at Los Alamos to address these problems

The Control Room Upgrade in Oskarshamn 2 Modernization Project Lesson Learned from Ongoing Human Factor design

International Nuclear Information System (INIS)

Thomas, Gunnarsson; Magnus, Eliasson

2011-01-01

Due to recent changes in Swedish commercial nuclear safety system requirements, OKG decided to make the changes required by the new safety requirements, apply for a 30-year license extension, and to concurrently make changes for a major power uprate; this project is called the Plant Life Extension project (PLEX). It was decided, in addition to several plant modifications, to re build the old control room to a new modern screen-based control room located in the same space as the old one, and with the same number of operators. This paper explains the approach taken when modernizing the control room as a part of the Oskarshamn 2 Modernization project PLEX, the results, and the lessons learned from this ongoing work. The combination of changes results in a modernization project that is expected to increase output power by approximately 50 MWe through increased efficiency and to result in an increase in thermal power from 1800 MWt to 2300 MWt (28%) and electrical power from 620 MWe to 840 MWe due to the power uprate. The license to operate OKG2 expires in 2012 The PLEX project is one of the most ambitious nuclear power plant modernization projects ever implemented, world-wide. The application of human factors engineering (HFE) and control room and HSI design is a complex challenge. The original main control room from 1975 in Oskarshamn 2, was quite compact and provided a fairly good overview of the process. New requirements for enhanced safety and other design changes in the process systems and instrumentation led to a step-wise installation of new information and control equipment in the control room. Since the control room was quite limited in space, the control room grew larger, and the new equipment was installed farther away from the operator workplaces into an adjacent control room. This was even the case for the new safety systems. These systems were functioning well separately as such, but in some cases their interfaces were inconsistent, leading to increased

Modern Solutions for Automation of Electrical Traction Power Supply Systems

Directory of Open Access Journals (Sweden)

Ana Mihaela Andreica

2011-09-01

Full Text Available This paper presents modern solutions for the automation of the electrical traction power supply system used in urban public transport (trams, trolleybuses and subway trains. The monitoring and control of this process uses SCADA distributed architectures, grouped around a central point (dispatcher who controls all field sensors, transmitters and actuators using programmable logical controllers. The presented applications refer to the Bucharest electrical transport infrastructure.

Light Water Reactor Sustainability Program Operator Performance Metrics for Control Room Modernization: A Practical Guide for Early Design Evaluation

Energy Technology Data Exchange (ETDEWEB)

Ronald Boring; Roger Lew; Thomas Ulrich; Jeffrey Joe

2014-03-01

As control rooms are modernized with new digital systems at nuclear power plants, it is necessary to evaluate the operator performance using these systems as part of a verification and validation process. There are no standard, predefined metrics available for assessing what is satisfactory operator interaction with new systems, especially during the early design stages of a new system. This report identifies the process and metrics for evaluating human system interfaces as part of control room modernization. The report includes background information on design and evaluation, a thorough discussion of human performance measures, and a practical example of how the process and metrics have been used as part of a turbine control system upgrade during the formative stages of design. The process and metrics are geared toward generalizability to other applications and serve as a template for utilities undertaking their own control room modernization activities.

Modern I and C systems

International Nuclear Information System (INIS)

Graf, A.

1997-01-01

The most important innovation stages of electronic I and C systems are summarized. The TELEPERM XS serves as the example to demonstrate the design of modern I and C systems as well as the use of computer-based tools. The paper explains the conditions of use of these tools during future system operation. By a comparative evaluation it is shown that the modernization of I and C systems brings not only increased reliability but also essential simplifications in operation as well as cost savings. Typical applications of the TELEPERM XS are in safety systems for reactor protection, and in the Engineered Safety Feature Actuation System. This is why, in conclusion, the author briefly refers to the design-based protection against systematic failures, which is a requirement of the nuclear safety engineering codes. (orig./CB) [de

The modern instrumentation used for monitoring and controlling the main parameters of the regenerative electro-mechano-hydraulic drive systems

Science.gov (United States)

Cristescu, Corneliu; Drumea, Petrin; Krevey, Petrica

2009-01-01

In this work is presented the modern instrumentation used for monitoring and controlling the main parameters for one regenerative drive system, used to recovering the kinetic energy of motor vehicles, lost in the braking phase, storing and using this energy in the starting or accelerating phases. Is presented a Romanian technical solution for a regenerative driving system, based on a hybrid solution containing a hydro-mechanic module and an existing thermal motor drive, all conceived as a mechatronics system. In order to monitoring and controlling the evolution of the main parameters, the system contains a series of sensors and transducers that provide the moment, rotation, temperature, flow and pressure values. The main sensors and transducers of the regenerative drive system, their principal features and tehnical conecting solutions are presented in this paper, both with the menaging electronic and informational subsystems.

Modernization of the Cassini Ground System

Science.gov (United States)

Razo, Gus; Fujii, Tammy

2014-01-01

The Cassini Spacecraft and its ground system have been operational for over 16 years. Modernization presents several challenges due to the personnel, processes, and tools already invested and embedded into the current ground system structure. Every mission's ground system has its own unique complexities and challenges, involving various organizational units. As any mission from its inception to its execution, schedules are always tight. This forces GDS engineers to implement a working ground system that is not necessarily fully optimized. Ground system challenges increase as technology evolves and cyber threats become more sophisticated. Cassini's main challenges were due to its ground system existing before many security requirements were levied on the multi-mission tools and networks. This caused a domino effect on Cassini GDS tools that relied on outdated technological features. In the aerospace industry reliable and established technology is preferred over innovative yet less proven technology. Loss of data for a spacecraft mission can be catastrophic; therefore, there is a reluctance to make changes and updates to the ground system. Nevertheless, all missions and associated teams face the need to modernize their processes and tools. Systems development methods from well-known system analysis and design principles can be applied to many missions' ground systems. Modernization should always be considered, but should be done in such a way that it does not affect flexibility nor interfere with established practices. Cassini has accomplished a secure and efficient ground data system through periodic updates. The obstacles faced while performing the modernization of the Cassini ground system will be outlined, as well as the advantages and challenges that were encountered.

Two-Person Control: A Brief History and Modern Industry Practices

Energy Technology Data Exchange (ETDEWEB)

Pedersen, Robert Douglas [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

2017-07-01

Physical asset protection is the principal objective of many security and safeguard measures. One well-known means of asset protection is two-person control. This paper reviews literature regarding two-person control to gain insight into its origin, first demonstrated uses, and its presence in several modern industries. This literature review of two-person control is intended to benefit people and organizations with a desire to understand its origins and how the practice has evolved over time, as well as give some insight into the flexibility of this safeguarding technique. The literature review is focused in four main sections: (1) defining two-person control, (2) early history, (3) two-person control in modern industry, and (4) a theory on how two- person control entered modern industry. ACKNOWLEDGEMENTS The author would like to thank Jarret Lafleur and Scott Paap of Sandia National Laboratories, California's Systems Analysis & Engineering organization for the opportunity to work on this project. Jarret Lafleur provided very constructive and helpful feedback through all stages of the work. Amanda Thompson of the Sandia California Technical Library maintained a great spirit and always had a quick document turnaround that very much helped out this project's completion. Additionally, yet perhaps most importantly, the author would like to thank his wife and daughter, along with the rest of his family, for continued support over the years. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology and Engineering Solutions of Sandia, LLC., a wholly owned subsidiary of Honeywell International, Inc., for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA0003525.

Life extension activities and modernization strategies for instrumentation ampersand control systems of research and power reactors in India

International Nuclear Information System (INIS)

Chaganty, S.P.; Bairi, B.R.

1993-01-01

Based on three and half decades of experience gained in the operation and maintenance of Instrumentation and Control Systems of nuclear reactors in India, specific investigations were made to understand various aspects of aging. The analysis of the failure rates of various instruments, plant outage figures and obsolescence of components have necessitated the replacement of instrumentation to improve the reliability and performance. The aging models available were used to determine the extent of performance degradation and to formulate maintenance strategies. The nuclear instrumentation of the aging research reactors at Bhabha Atomic Research Centre (BARC) has been replaced with high reliability equipment using modern integrated circuits. This has resulted in an improvement in the mean time between failure (MTBF) by a factor of five. The neutronic instrumentation of Fast Breeder Test Reactor (FBTR) at Madras is currently being upgraded with the introduction of microprocessor based safety units for reactivity computation and online testing of safety logic with Fine Impulse Technique. The operating experience has also indicated the necessity of developing online surveillance methods and status monitoring of various systems to detect aging. Online cable insulation measurement technique and noise analysis methods for vibration monitoring have been developed. Campbell method of signal processing has been successfully used in extending the useful life of Local Power Range monitors in the Boiling Water Reactor at Tarapur. In order to improve reliability, accuracy and provide efficient man machine interface, microprocessor based systems with online testing features have been installed in power reactors. These include the high performance reactor regulating system and centralised radiation monitoring systems commissioned at Kakrapara power station. The paper describes the above systems and the modernization strategies for nuclear instrumentation and control

Control and automation systems

International Nuclear Information System (INIS)

Schmidt, R.; Zillich, H.

1986-01-01

A survey is given of the development of control and automation systems for energy uses. General remarks about control and automation schemes are followed by a description of modern process control systems along with process control processes as such. After discussing the particular process control requirements of nuclear power plants the paper deals with the reliability and availability of process control systems and refers to computerized simulation processes. The subsequent paragraphs are dedicated to descriptions of the operating floor, ergonomic conditions, existing systems, flue gas desulfurization systems, the electromagnetic influences on digital circuits as well as of light wave uses. (HAG) [de

Modernizing and Upgrading the Astrogeodetic Camera System for Determining Vertical Deflections

Science.gov (United States)

Albayrak, M.; Halicioglu, K.; Basoglu, B.; Ulug, R.; Ozludemir, M. T.; Deniz, R.

2017-12-01

The geoid is the equipotential surface of the Earth. Modeling the geoid with high accuracy is one of the critical issues in Geodesy. Development of geoid modeling is based on geodetic, gravimetric and astrogeodetic techniques. In order to reach the intended accuracy, deflection of the vertical (VD) components, which is obtained by the astrogeodetic techniques, can be used. VD is also very important for providing valuable information on the structure of Earth's gravity field. For this reason, astrogeodetic observations were essential gravity field observables and used for astrogeodetic geoid determinations. Scientists in several countries have developed modern instruments to measure vertical deflections. One of those instruments, namely Astro-geodetic Camera System (ACSYS) was developed in Turkey in 2015. The system components include a telescope, a Charged Coupled Device (CCD), two tiltmeters with the accuracy of 0.01 milliradians, a focuser, a single frequency GPS receiver and a substructure. The first version of the ACSYS is capable of determining astronomical coordinates with an accuracy of 0.2-0.3 arc sec, yet it has some limitations in observation duration. Because of the semi-automated mechanical design, leveling the system towards zenith was a time-consuming process. Since the beginning of 2016, the ACSYS has been modernized through the upgrade of the system with new technological components, hardware and software which is supported by The Scientific and Research Council of Turkey. Upgrade process includes the installation of a high-resolution tiltmeter with an accuracy of 1 nano-radians, implementation of a temperature compensating focuser and fully automatized substructure system. The components of the system are controlled by specially designed and integrated software. In the scope of the modernization studies, the project team has also been working on a unified real-time processing and control software for the ACSYS.v2. This study introduces the

Experimental direct digital control of the power plant A1 reactor based on a modern control theory approach

International Nuclear Information System (INIS)

Karpeta, C.

1979-01-01

The objective of the project was to accumulate technical experience with application of modern control theory in nuclear power by carrying out a case study of an experimental direct digital control at the A1 reactor about its nominal steady state. The research has proved that slightly modified method of solution of the linear stochastic regulator problem can be successfully applied in design of digital control system of nuclear power reactors

An integrated autonomous rendezvous and docking system architecture using Centaur modern avionics

Science.gov (United States)

Nelson, Kurt

1991-01-01

The avionics system for the Centaur upper stage is in the process of being modernized with the current state-of-the-art in strapdown inertial guidance equipment. This equipment includes an integrated flight control processor with a ring laser gyro based inertial guidance system. This inertial navigation unit (INU) uses two MIL-STD-1750A processors and communicates over the MIL-STD-1553B data bus. Commands are translated into load activation through a Remote Control Unit (RCU) which incorporates the use of solid state relays. Also, a programmable data acquisition system replaces separate multiplexer and signal conditioning units. This modern avionics suite is currently being enhanced through independent research and development programs to provide autonomous rendezvous and docking capability using advanced cruise missile image processing technology and integrated GPS navigational aids. A system concept was developed to combine these technologies in order to achieve a fully autonomous rendezvous, docking, and autoland capability. The current system architecture and the evolution of this architecture using advanced modular avionics concepts being pursued for the National Launch System are discussed.

Network analysis and synthesis a modern systems theory approach

CERN Document Server

Anderson, Brian D O

2006-01-01

Geared toward upper-level undergraduates and graduate students, this book offers a comprehensive look at linear network analysis and synthesis. It explores state-space synthesis as well as analysis, employing modern systems theory to unite the classical concepts of network theory. The authors stress passive networks but include material on active networks. They avoid topology in dealing with analysis problems and discuss computational techniques. The concepts of controllability, observability, and degree are emphasized in reviewing the state-variable description of linear systems. Explorations

Project Management Using Modern Guidance, Navigation and Control Theory

Science.gov (United States)

Hill, Terry R.

2011-01-01

Implementing guidance, navigation, and control (GN&C) theory principles and applying them to the human element of project management and control is not a new concept. As both the literature on the subject and the real-world applications are neither readily available nor comprehensive with regard to how such principles might be applied, this paper has been written to educate the project manager on the "laws of physics" of his or her project (not to teach a GN&C engineer how to become a project manager) and to provide an intuitive, mathematical explanation as to the control and behavior of projects. This paper will also address how the fundamental principles of modern GN&C were applied to the National Aeronautics and Space Administration's (NASA) Constellation Program (CxP) space suit project, ensuring the project was managed within cost, schedule, and budget. A project that is akin to a physical system can be modeled and managed using the same over arching principles of GN&C that would be used if that project were a complex vehicle, a complex system(s), or complex software with time-varying processes (at times nonlinear) containing multiple data inputs of varying accuracy and a range of operating points. The classic GN&C theory approach could thus be applied to small, well-defined projects; yet when working with larger, multiyear projects necessitating multiple organizational structures, numerous external influences, and a multitude of diverse resources, modern GN&C principles are required to model and manage the project. The fundamental principles of a GN&C system incorporate these basic concepts: State, Behavior, Feedback Control, Navigation, Guidance and Planning Logic systems. The State of a system defines the aspects of the system that can change over time; e.g., position, velocity, acceleration, coordinate-based attitude, and temperature, etc. The Behavior of the system focuses more on what changes are possible within the system; this is denoted in the state

Applications of modern control systems in nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Wilhelm, H [Brown, Boveri und Cie A.G., Mannheim (Germany, F.R.). Abt. GK/TE

1980-10-01

A new generation of automation and control systems are currently becoming commercially available in the power plant market which, because of their incorporation of microprocessors and bus data transmission systems, represent a major step forward in innovation. The application of these systems meets today's requirements and solutions, for the number of measurements to be performed has increased five or sixfold in the past few years, and the number of drive systems to be controlled has doubled or even tripled. Requirements to be met by process management systems have become vastly more complicated: peak load operation, short startup times, improved communication, and rising safety and reliability requirements, especially in nuclear power plants. Control concepts have been developed for the area relevant to reactor safety and for the whole of the plant, which make full use of the possibilities offered by plant systems. More stringent demands must be met especially in the areas of handling, communication, testing capability, improved function, and flexibility and modular design in the safety sector.

Evolution of the SOFIA tracking control system

Science.gov (United States)

Fiebig, Norbert; Jakob, Holger; Pfüller, Enrico; Röser, Hans-Peter; Wiedemann, Manuel; Wolf, Jürgen

2014-07-01

The airborne observatory SOFIA (Stratospheric Observatory for Infrared Astronomy) is undergoing a modernization of its tracking system. This included new, highly sensitive tracking cameras, control computers, filter wheels and other equipment, as well as a major redesign of the control software. The experiences along the migration path from an aged 19" VMbus based control system to the application of modern industrial PCs, from VxWorks real-time operating system to embedded Linux and a state of the art software architecture are presented. Further, the concept is presented to operate the new camera also as a scientific instrument, in parallel to tracking.

Activities at the electric power research institute to support the modernization of instrumentation and control systems in nuclear power plants in the United States of America

International Nuclear Information System (INIS)

Naser, J.

1998-01-01

Most nuclear power plants in the United States are operating with a vast majority of their original analog instrumentation and control (I and C) equipment. Many of the I and C systems in the plants need to be modernized in a reliable and cost-effective manner to replace obsolete equipment, to reduce operating and maintenance (O and M) costs, to improve plant performance, and to maintain safety. The major drivers for the replacement of the safety, control, and information systems in nuclear power plants are the obsolescence of the existing hardware and the need for more cost-effective power production. Competition between power producers is dictating the need for more cost-effective power production. The increasing O and M costs to maintain systems experiencing obsolescence problems is counter to the needs for more cost-effective power production and improved competitiveness. Modern technology, especially digital systems, offers improved functionality, performance, and reliability; solutions to obsolescence of equipment; reduction in O and M costs, and the potential to enhance safety. Digital I and C systems with their inherent advantages will be implemented only if reliable and cost-effective implementation and licensing acceptance is achieved and if the modernized system supports reduced power production costs. Increasing competition will continue to be a major factor in the operation of nuclear power plants. I will continue to dictate the need for improved productivity and cost-effectiveness. EPRI and its members utilities are working together on an industry-wide Instrumentation and Control Program to address I and C issues and to develop cost-effective solutions. (author)

Light Water Reactor Sustainability Program A Reference Plan for Control Room Modernization: Planning and Analysis Phase

Energy Technology Data Exchange (ETDEWEB)

Jacques Hugo; Ronald Boring; Lew Hanes; Kenneth Thomas

2013-09-01

The U.S. Department of Energy’s Light Water Reactor Sustainability (LWRS) program is collaborating with a U.S. nuclear utility to bring about a systematic fleet-wide control room modernization. To facilitate this upgrade, a new distributed control system (DCS) is being introduced into the control rooms of these plants. The DCS will upgrade the legacy plant process computer and emergency response facility information system. In addition, the DCS will replace an existing analog turbine control system with a display-based system. With technology upgrades comes the opportunity to improve the overall human-system interaction between the operators and the control room. To optimize operator performance, the LWRS Control Room Modernization research team followed a human-centered approach published by the U.S. Nuclear Regulatory Commission. NUREG-0711, Rev. 3, Human Factors Engineering Program Review Model (O’Hara et al., 2012), prescribes four phases for human factors engineering. This report provides examples of the first phase, Planning and Analysis. The three elements of Planning and Analysis in NUREG-0711 that are most crucial to initiating control room upgrades are: • Operating Experience Review: Identifies opportunities for improvement in the existing system and provides lessons learned from implemented systems. • Function Analysis and Allocation: Identifies which functions at the plant may be optimally handled by the DCS vs. the operators. • Task Analysis: Identifies how tasks might be optimized for the operators. Each of these elements is covered in a separate chapter. Examples are drawn from workshops with reactor operators that were conducted at the LWRS Human System Simulation Laboratory HSSL and at the respective plants. The findings in this report represent generalized accounts of more detailed proprietary reports produced for the utility for each plant. The goal of this LWRS report is to disseminate the technique and provide examples sufficient to

Applications of modern control systems in nuclear power plants

International Nuclear Information System (INIS)

Wilhelm, H.

1980-01-01

A new generation of automation and control systems are currently becoming commercially available in the power plant market which, because of their incorporation of microprocessors and bus data transmission systems, represent a major step forward in innovation. The application of these systems meets today's requirements and solutions, for the number of measurements to be performed has increased five or sixfold in the past few years, and the number of drive systems to be controlled has doubled or even tripled. Requirements to be met by process management systems have become vastly more complicated: peak load operation, short startup times, improved communication, and rising safety and reliability requirements, especially in nuclear power plants. Control concepts have been developed for the area relevant to reactor safety and for the whole of the plant, which make full use of the possibilities offered by plant systems. More stringent demands must be met especially in the areas of handling, communication, testing capability, improved function, and flexibility and modular design in the safety sector. (orig.) [de

Modernization project of the rod control system and in-core instrumentation system for 34 units of the 900 MW French EDF fleet

International Nuclear Information System (INIS)

Tavolara, Ivan; Desgeorge, Romain; Verburgh, Pierre

2014-01-01

Rolls-Royce and Cegelec, in partnership, carry out a unique and considerable modernisation project of two Instrumentation and Control (I and C) systems for the entire 900 MWe fleet of Electricite De France (EDF). Both rod control (RCS) and reactor in-core measurement (RIC) systems are to be modernised in the frame of the third ten-year renovation of all 34 reactor units over 9 power plants. The RCS contributes to the control of nuclear power by actuating control rod drive mechanisms that allow insertion or withdrawal of control rods. The RCS has also monitoring functions such as controlling the actual rods' position as well as the functional consistency between commands and actual positions. The RIC system measures in-core neutron flux, providing useful information to the control room as well as to the reactor unit computer for further processing. The renovated systems shall replace the existing ageing analog technology by modern digital technology based on PLC (Programmable Logic Controllers) and FPGA (Field-Programmable Gate Array) in the case of power subassemblies of RCS. Both systems rely for certain functions on a common network linking the RCS and RIC networks, improving operations and maintenance thanks to a powerful Man Machine Interface at the different locations of the systems with an extensive suite of tools and diagnostic menus. The project whose design phase started in July 2006 is now in its deployment phase after the successful site implementation of both systems at the first of kind units of Tricastin and Fessenheim power plants, respectively in August 2009 and February 2010. With 20 units in operation in 2014, the deployment shall continue with the other 14 until 2020. Rolls-Royce has a broad range of civil nuclear expertise, including work related to licensing and safety reviews, engineering design, supply chain management, manufacturing, installation and commissioning of the nuclear island systems and equipment, as well as operational

Modernization project of the rod control system and in-core instrumentation system for 34 units of the 900 MW French EDF fleet

International Nuclear Information System (INIS)

Tavolara, Ivan; Verburgh, Pierre; Menager, Antoine

2010-01-01

Rolls-Royce and Cegelec, in partnership, carry out a unique and considerable modernisation project of two Instrumentation and Control (I and C) systems for the entire 900 MWe fleet of Electricite De France (EDF). Both rod control (RCS) and reactor in-core measurement (RIC) systems are to be modernised in the frame of the third ten-year renovation of all 34 reactor units over 9 power plants. The RCS contributes to the control of nuclear power by actuating control rod drive mechanisms that allow insertion or withdrawal of control rods. The RCS has also monitoring functions such as controlling the actual rods' position as well as the functional consistency between commands and actual positions. The RIC system measures in-core neutron flux, providing useful information to the control room as well as to the reactor unit computer for further processing. The renovated systems shall replace the existing ageing analog technology by modern digital technology based on PLC (Programmable Logic Controllers) and FPGA (Field-Programmable Gate Array) in the case of power subassemblies of RCS. Both systems rely for certain functions on a common network linking the RCS and RIC networks, improving operations and maintenance thanks to a powerful Man Machine Interface at the different locations of the systems with an extensive suite of tools and diagnostic menus. The project whose design phase started in July 2006 is now in its deployment phase after the successful site implementation of both systems at the first units of Tricastin and Fessenheim power plants, respectively in August 2009 and February 2010. The deployment shall continue with the other 32 units until 2020. Rolls-Royce has a broad range of civil nuclear expertise, including work related to licensing and safety reviews, engineering design, supply chain management, manufacturing, installation and commissioning of the nuclear island systems and equipment, as well as operational management through life support. Cegelec, with

A Distributed Control System Prototyping Environment to Support Control Room Modernization

Energy Technology Data Exchange (ETDEWEB)

Lew, Roger Thomas [Idaho National Lab. (INL), Idaho Falls, ID (United States); Boring, Ronald Laurids [Idaho National Lab. (INL), Idaho Falls, ID (United States); Ulrich, Thomas Anthony [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2014-12-01

Operators of critical processes, such as nuclear power production, must contend with highly complex systems, procedures, and regulations. Developing human-machine interfaces (HMIs) that better support operators is a high priority for ensuring the safe and reliable operation of critical processes. Human factors engineering (HFE) provides a rich and mature set of tools for evaluating the performance of HMIs, however the set of tools for developing and designing HMIs is still in its infancy. Here we propose a rapid prototyping approach for integrating proposed HMIs into their native environments before a design is finalized. This approach allows researchers and developers to test design ideas and eliminate design flaws prior to fully developing the new system. We illustrate this approach with four prototype designs developed using Microsoft’s Windows Presentation Foundation (WPF). One example is integrated into a microworld environment to test the functionality of the design and identify the optimal level of automation for a new system in a nuclear power plant. The other three examples are integrated into a full-scale, glasstop digital simulator of a nuclear power plant. One example demonstrates the capabilities of next generation control concepts; another aims to expand the current state of the art; lastly, an HMI prototype was developed as a test platform for a new control system currently in development at U.S. nuclear power plants. WPF possesses several characteristics that make it well suited to HMI design. It provides a tremendous amount of flexibility, agility, robustness, and extensibility. Distributed control system (DCS) specific environments tend to focus on the safety and reliability requirements for real-world interfaces and consequently have less emphasis on providing functionality to support novel interaction paradigms. Because of WPF’s large user-base, Microsoft can provide an extremely mature tool. Within process control applications,WPF is

About development of automation control systems

Science.gov (United States)

Myshlyaev, L. P.; Wenger, K. G.; Ivushkin, K. A.; Makarov, V. N.

2018-05-01

The shortcomings of approaches to the development of modern control automation systems and ways of their improvement are given: the correct formation of objects for study and optimization; a joint synthesis of control objects and control systems, an increase in the structural diversity of the elements of control systems. Diagrams of control systems with purposefully variable structure of their elements are presented. Structures of control algorithms for an object with a purposefully variable structure are given.

Reliability Assessment and Energy Loss Evaluation for Modern Wind Turbine Systems

DEFF Research Database (Denmark)

Zhou, Dao

. The cost of energy in wind turbine system is then addressed in Chapter 5, where different wind classes and operation modes of the reactive power injection are taken into account. Finally, the internal and external challenges for power converters in the DFIG systems to ride through balanced grid faults......With a steady increase of the wind power penetration, the demands to the wind power technology are becoming the same as those to the conventional energy sources. In order to fulfill the requirements, power electronics technology is the key for the modern wind turbine systems – both the Doubly...... to explore the reliability and cost of energy in the modern wind turbine systems. Moreover, advanced control strategies have been proposed and developed for an efficient and reliable operation during the normal condition as well as under grid faults. The documented thesis starts with the descriptions...

Five Indisputable Facts on Modern Power Systems

Energy Technology Data Exchange (ETDEWEB)

Bloom, Aaron P [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Brinkman, Gregory L [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Lopez, Anthony J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Holttinen, Hannele [VTT Technical Research Centre of Finland; Helman, Udi [Helman Analytics; Summers, Kate [Pacific Hydro; Bakke, Jordan [Midcontinent Independent System Operator

2017-08-01

This presentation overviews five indisputable facts about modern power systems: Fact one: The grid can handle more renewable generation than previously thought. Fact two: Geographic and resource diversity provide additional reliability to the system. Fact three: Wind and solar forecasting provide significant value. Fact four: Our electric power markets were not originally designed for variable renewables -- but they could be adapted. Fact five: Modern power electronics are creating new sources of essential reliability services.

Modern operator's consoles for accelerator control at Fermilab

International Nuclear Information System (INIS)

Lucas, P.; Cahill, K.; Peters, R.; Smedinghoff, J.

1991-01-01

Since the construction of the Tevatron the Fermilab accelerator complex has been controlled from operator's consoles based on PDP-11 computers and interaction with display hardware via Camac. In addition the Linac has been controllable from microprocessor-based local consoles. The new generation of console devices is based on VAXstation computers, networked by Ethernet and Token Ring, and utilizing the X-windows protocol. Under X the physical display (server) can be driven by any network node, and need not be part of the console computer (client). This allows great flexibility in configuring display devices - with X-terminals, Unix workstations, and Macintoshes all having been utilized. Over half of the 800 application programs on the system have been demonstrated to work properly in the new environment. The modern version of a Linac local console runs in a Macintosh. These are networked via Token Ring to Linac local control stations. They provide color graphics and a hard copy capability which was previously lacking

An Improved Method to Control the Critical Parameters of a Multivariable Control System

Science.gov (United States)

Subha Hency Jims, P.; Dharmalingam, S.; Wessley, G. Jims John

2017-10-01

The role of control systems is to cope with the process deficiencies and the undesirable effect of the external disturbances. Most of the multivariable processes are highly iterative and complex in nature. Aircraft systems, Modern Power Plants, Refineries, Robotic systems are few such complex systems that involve numerous critical parameters that need to be monitored and controlled. Control of these important parameters is not only tedious and cumbersome but also is crucial from environmental, safety and quality perspective. In this paper, one such multivariable system, namely, a utility boiler has been considered. A modern power plant is a complex arrangement of pipework and machineries with numerous interacting control loops and support systems. In this paper, the calculation of controller parameters based on classical tuning concepts has been presented. The controller parameters thus obtained and employed has controlled the critical parameters of a boiler during fuel switching disturbances. The proposed method can be applied to control the critical parameters like elevator, aileron, rudder, elevator trim rudder and aileron trim, flap control systems of aircraft systems.

Modernization of instrumentation and control in nuclear power plants. Report prepared within the framework of the International Working Group on Nuclear Power Plant Control and Instrumentation

International Nuclear Information System (INIS)

1998-05-01

The scope of the modernization activities described in this report includes the modernization of equipment in operating plants and partially built plants. It covers the full range of types of instrumentation and control (I and C) systems including protection, safety, control and information systems. It is applicable for a plant throughout its life. The report includes appropriate consideration of the increasingly international nature of the I and C systems supply industry and takes advantage of the activities and lessons learned in the different national approaches to develop general guidance and recommendations. An Annex includes 10 country reports which were separately indexed

Modernization incore monitoring system of WWER-1000 reactors (V-320)

International Nuclear Information System (INIS)

Mitin, Valentin; Semchenkov, Yurij; Kalinushkin, Andrey

2008-01-01

Modern ICIS system for VVER-1000, including a number of sensors, cable runs, corresponding measuring equipment and computer engineering, software, accumulated 30 year experience of interaction researches on VVER reactors and is capable to ensure carrying out of control, protection, informational, diagnostic functions and thus to promote real increase of quality, reliability and safety in nuclear fuel and NPP power units operation

Modern linear control design a time-domain approach

CERN Document Server

Caravani, Paolo

2013-01-01

This book offers a compact introduction to modern linear control design.  The simplified overview presented of linear time-domain methodology paves the road for the study of more advanced non-linear techniques. Only rudimentary knowledge of linear systems theory is assumed - no use of Laplace transforms or frequency design tools is required. Emphasis is placed on assumptions and logical implications, rather than abstract completeness; on interpretation and physical meaning, rather than theoretical formalism; on results and solutions, rather than derivation or solvability.  The topics covered include transient performance and stabilization via state or output feedback; disturbance attenuation and robust control; regional eigenvalue assignment and constraints on input or output variables; asymptotic regulation and disturbance rejection. Lyapunov theory and Linear Matrix Inequalities (LMI) are discussed as key design methods. All methods are demonstrated with MATLAB to promote practical use and comprehension. ...

A Case Study on Cyber-security Program for the Programmable Logic Controller of Modern NPPs

International Nuclear Information System (INIS)

Song, S. H.; Lee, M. S.; Kim, T. H.; Park, C. H.; Park, S. P.; Kim, H. S.

2014-01-01

As instrumentation and control (I and C) systems for modern Nuclear Power Plants (NPPs) have been digitalized to cope with their growing complexity, the cyber-security has become an important issue. To protect the I and C systems adequately from cyber threats, such as Stuxnet that attacked Iran's nuclear facilities, regulations of many countries require a cyber-security program covering all the life cycle phases of the system development, from the concept to the retirement. This paper presents a case study of cyber-security program that has been performed during the development of the programmable logic controller (PLC) for modern NPPs of Korea. In the case study, a cyber-security plan, including technical, management, and operational controls, was established through a security risk assessment. Cyber-security activities, such as development of security functions and periodic inspections, were conducted according to the plan: the security functions were applied to the PLC as the technical controls, and periodic inspections and audits were held to check the security of the development environment, as the management and operational controls. A final penetration test was conducted to inspect all the security problems that had been issued during the development. The case study has shown that the systematic cyber-security program detected and removed the vulnerabilities of the target system, which could not be found otherwise, enhancing the cyber-security of the system

A Case Study on Cyber-security Program for the Programmable Logic Controller of Modern NPPs

Energy Technology Data Exchange (ETDEWEB)

Song, S. H. [Korea University, Seoul (Korea, Republic of); Lee, M. S.; Kim, T. H. [Formal Work Inc., Seoul (Korea, Republic of); Park, C. H. [LINE Corp., Tokyo (Japan); Park, S. P. [Ahnlab Inc., Seoul (Korea, Republic of); Kim, H. S. [Sejong University, Seoul (Korea, Republic of)

2014-08-15

As instrumentation and control (I and C) systems for modern Nuclear Power Plants (NPPs) have been digitalized to cope with their growing complexity, the cyber-security has become an important issue. To protect the I and C systems adequately from cyber threats, such as Stuxnet that attacked Iran's nuclear facilities, regulations of many countries require a cyber-security program covering all the life cycle phases of the system development, from the concept to the retirement. This paper presents a case study of cyber-security program that has been performed during the development of the programmable logic controller (PLC) for modern NPPs of Korea. In the case study, a cyber-security plan, including technical, management, and operational controls, was established through a security risk assessment. Cyber-security activities, such as development of security functions and periodic inspections, were conducted according to the plan: the security functions were applied to the PLC as the technical controls, and periodic inspections and audits were held to check the security of the development environment, as the management and operational controls. A final penetration test was conducted to inspect all the security problems that had been issued during the development. The case study has shown that the systematic cyber-security program detected and removed the vulnerabilities of the target system, which could not be found otherwise, enhancing the cyber-security of the system.

Integration of analog and digital instrumentation and control systems in hybrid control rooms

International Nuclear Information System (INIS)

2010-01-01

he IAEA's activities in the area of nuclear power plant operating performance and life cycle management are aimed at increasing Member State capabilities in utilizing good engineering and management practices as developed and transferred by the IAEA. In particular, the IAEA supports the improvement of nuclear power plant performance, plant life management, training, power uprating, operational license renewal, and the modernization of instrumentation and control (I and C) systems of plants. The issue of the integration of analog and digital I and C systems in hybrid control rooms was suggested by the IAEA Technical Working Group on Nuclear Power Plant Control and Instrumentation (TWG-NPPCI) at its meetings in 2003 and 2005. The subject was then approved by the IAEA and included in its work programmes for 2006-2009. The purpose of this report is to help nuclear utilities in planning control room and other human system interface (HSI) changes, making appropriate use of modern technologies. These technologies would aid in managing ageing and obsolescence, and facilitate improvements in plant performance and safety. This report covers a broad spectrum of potential changes to the control room ranging from the replacement of a few obsolete components with newer digital devices to a fully computerized control room. New digital technologies offer significant opportunities to improve access to and presentation of information to the user, e.g. operators, maintenance staff and management. However, this technology should be used prudently. In some cases, modernization is undertaken to resolve ageing and obsolescence or to meet regulatory requirements for license renewal. The integration of new technologies during main control room (MCR) modernizations should be performed cautiously and all affected aspects of plant maintenance, and operation should be carefully considered, paying particular attention to the human factors elements of these aspects. This report describes a

Modernization of control instrumentation and security of reactor IAN - R1

International Nuclear Information System (INIS)

Gonzalez, J. M.

1993-01-01

The program to modernize IAN-R1 research reactor control and safety instrumentation has been carried out considering two main aspects: updating safety philosophy requirements and acquiring the newest reactor control instrumentation controlled by computer, following the present criteria internationally recognized, for safety and reliable reactor operations and the latest developments of nuclear electronic technology. The new IAN-R1 reactor instrumentation consist of two wide range neutron monitoring channels, commanded by microprocessor a data acquisition system and reactor control, (controlled by computers). The reactor control desk is providing through two displays; all safety and control signals to the reactor operators; furthermore some signals like reactor power, safety and period signals are also showed on digital bar graphics, which are hard wired directly from the neutron monitoring channels

Computer-aided control system design

International Nuclear Information System (INIS)

Lebenhaft, J.R.

1986-01-01

Control systems are typically implemented using conventional PID controllers, which are then tuned manually during plant commissioning to compensate for interactions between feedback loops. As plants increase in size and complexity, such controllers can fail to provide adequate process regulations. Multivariable methods can be utilized to overcome these limitations. At the Chalk River Nuclear Laboratories, modern control systems are designed and analyzed with the aid of MVPACK, a system of computer programs that appears to the user like a high-level calculator. The software package solves complicated control problems, and provides useful insight into the dynamic response and stability of multivariable systems

Artificial intelligence in robot control systems

Science.gov (United States)

Korikov, A.

2018-05-01

This paper analyzes modern concepts of artificial intelligence and known definitions of the term "level of intelligence". In robotics artificial intelligence system is defined as a system that works intelligently and optimally. The author proposes to use optimization methods for the design of intelligent robot control systems. The article provides the formalization of problems of robotic control system design, as a class of extremum problems with constraints. Solving these problems is rather complicated due to the high dimensionality, polymodality and a priori uncertainty. Decomposition of the extremum problems according to the method, suggested by the author, allows reducing them into a sequence of simpler problems, that can be successfully solved by modern computing technology. Several possible approaches to solving such problems are considered in the article.

Voltage control and protection in electrical power systems from system components to wide-area control

CERN Document Server

Corsi, Sandro

2015-01-01

Based on the author’s twenty years of experience, this book shows the practicality of modern, conceptually new, wide area voltage control in transmission and distribution smart grids, in detail. Evidence is given of the great advantages of this approach, as well as what can be gained by new control functionalities which modern technologies now available can provide. The distinction between solutions of wide area voltage regulation (V-WAR) and wide area voltage protection (V-WAP) are presented, demonstrating the proper synergy between them when they operate on the same power system as well as the simplicity and effectiveness of the protection solution in this case. The author provides an overview and detailed descriptions of voltage controls, distinguishing between generalities of underdeveloped, on-field operating applications and modern and available automatic control solutions, which are as yet not sufficiently known or perceived for what they are: practical, high-performance and reliable solutions. At th...

Modernization of instrumentation and control in nuclear power plants. Report prepared within the framework of the International Working Group on Nuclear Power Plant Control and Instrumentation

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-05-01

The scope of the modernization activities described in this report includes the modernization of equipment in operating plants and partially built plants. It covers the full range of types of instrumentation and control (I and C) systems including protection, safety, control and information systems. It is applicable for a plant throughout its life. The report includes appropriate consideration of the increasingly international nature of the I and C systems supply industry and takes advantage of the activities and lessons learned in the different national approaches to develop general guidance and recommendations. An Annex includes 10 country reports which were separately indexed Refs, figs, tabs

Essence and constituents of modernization system of economy

Directory of Open Access Journals (Sweden)

K.О. Buzhymska

2015-06-01

Full Text Available The article substantiates the necessity and essence systems of modernization economics as part of the socio-economic system of the country and offered its overall scheme. On the basis of analysis of selected major components of modernization system: objective, external and internal environment, objects and subjects, and stage of development, the results of the operation, instruments and mechanisms. Description of the main elements of the system upgrades provided in the article to identify the causes of the inefficiency of its functioning, problems of development, underdeveloped and missing elements and outline the prospects of further development of the system.

Problems in modernization of automation systems at coal preparation plants

Science.gov (United States)

Myshlyaev, L. P.; Lyakhovets, M. V.; Venger, K. G.; Leontiev, I. A.; Makarov, G. V.; Salamatin, A. S.

2018-05-01

The factors influencing the process of modernization (reconstruction) of the automation systems at coal preparation plants are described. Problems such as heterogeneity of existing and developed systems, planning of reconstruction of a technological complex without taking into account modernization of automated systems, commissioning without stopping the existing technological complex, as well as problems of conducting procurement procedures are discussed. The option of stage-by-stage start-up and adjustment works in the conditions of modernization of systems without long stops of the process equipment is offered.

Modernization of the feedwater heaters control level of the Almaraz I Nuclear Power Plant by OVATION system; Modernizacion del control de nivel de los calentadores de agua de alimentacion de C.N. Almaraz I mediante el sistema OVATION

Energy Technology Data Exchange (ETDEWEB)

Madronal Rodriguez, E.; Cabrero Munoz, J. E.

2010-07-01

As a result of the process of technological renovation of the heaters system and the power increase project, Almaraz Nuclear Power Plant has made several design changes in the feedwater heaters system. Within these changes, the old heaters control loops are replaced because the new power will increase the heaters drainage caudal. This modernization is carried out using the OVATION control system.

Modernization Solution for Legacy Banking System Using an Open Architecture

Directory of Open Access Journals (Sweden)

Constantin Marian MATEI

2012-01-01

Full Text Available Banks are still using legacy systems as the core of their business is comprised within such sys-tems. Since the technology and client demands are changing rapidly, the banks have to adapt their systems in order to be competitive. The issue is to identify correctly what are the bank users preferences in terms of software reliability and how modern is the system For instance, there are users who enjoy working using the old screen format, and there are users who enjoy working with newer layouts, Web interfaces, and so on. We need also to know the constraints generated by the usage of legacy systems, and how these systems can be improved or replaced. The scope of the article is to present a solution of modernizing a legacy banking system by using a SOA approach. The research is based on the modernization of a legacy system developed in COBOL/400 under IBM iSeries. The modernization process uses a SOA ap-proach using JAVA technologies.

NPP I and C system modernizations in the Czech Republic. The NPP Dukovany example

International Nuclear Information System (INIS)

Krs, P.

1998-01-01

There are four units of WWER 440/213 type reactors under operation at Nuclear Power Plant Dukovany site in the Czech Republic. The EEZ utility has decided to include upgrade of existing Instrumentation and Control (I and C) systems as one of the most significant parts of a larger scale modernization project. The original I and C systems designed in the late 70's and early 80's with analogue equipment and relays will be subjected to an integrated modernization programme developed to replace obsolete equipment, to balance operational and maintenance costs, to improve performance and to enhance plant safety. To achieve this objective within next decade, the utility has already started preparatory phase of the overall modernization project, including analytical and planning activities related to the I and C part. (author)

Development of prosthesis grasp control systems on a robotic testbed

NARCIS (Netherlands)

Peerdeman, B.; Fabrizi, Ugo; Palli, Gianluca; Melchiorri, Claudio; Stramigioli, Stefano; Misra, Sarthak

2012-01-01

Modern myoelectric hand prostheses continue to increase in functionality, while their control is constrained by the limits of myoelectric input. This paper covers the development and testing of grasp control systems for multifunctional myoelectric prosthetic hands. The functionality of modern hand

Planning of community heating systems modernization and development

International Nuclear Information System (INIS)

Mroz, Tomasz M.

2008-01-01

New approach to community heating systems modernization and development planning process has been proposed. It is based on the general decision making aid algorithm. The proposed algorithm takes into account both demand and supply side of community heat market modernization and development. The first step of algorithm - analytical step, refers to data base creation, which is needed for the description of community heating system energy, ecology and economic characteristics. Analysis of those characteristics allows for the identification of heating system market modernization and development potential scenarios. The second algorithm step - decision step, allows for the identification of the most compromise scenarios of system modernization and development. To make the planning process more transparent and to increase the influence of decision makers on the planning process the ELECTRE III method was chosen as the tool of decision aid. The ELECTRE III method is based on the construction of outranking relation and definition of pseudo-criterion. The iteration mode of method application allows the decision maker and analyst for the investigation of the sensitivity of final solution to the changing preference model. One of the methods of statistics - the creditability of mean range method was used for the determination of initial definition of pseudo-criterion. Proposed algorithm and decision aid method were employed for the case study analysis referring to the choice of the heating system for new developing urban area. (author)

Air Traffic Control: Observations on FAA's Air Traffic Control Modernization Program

National Research Council Canada - National Science Library

1999-01-01

In 1981, FAA began a multibillion-dollar modernization effort to improve the safety, capacity, and efficiency of this system to meet the increasing demand for air traffic services and to replace aging equipment...

Use of Modern Birth Control Methods Among Rural Communities in ...

African Journals Online (AJOL)

elearning

ABSTRACT. This paper studied the extent of utilization of Modern Birth Control Methods (MBCM) among rural dwellers in ... respondents used MBCM while 57% of them used the traditional birth control methods. ..... School of Public Health.

Modernization of existing power plants. Progress in automation and process control/observation

International Nuclear Information System (INIS)

Hanna, I.

1996-01-01

Numerous power plants are now getting on in years, and their owners have to face the question 'New plant or upgrade job ?'. Experience in the past few years has shown that in many cases modernization/upgrading of existing plants is a more favorable option than building a complete new power plant. Advantages like lower capital investment costs and avoidance of licensing risks for new plants constitute important motives for choosing the upgrade option in numerous power plants modernization projects. The defined objective here is to ensure the units' operating capability for another 20 to 25 years, sometimes supplemented by meticulous compliance with current environmental impact legislation. Another cogent argument emerges from automation engineering advances in modern-day control systems which make an effective contribution to meeting upgrading objective like: equipment/material -friendly operation, extended useful lifetime, enhanced plant reliability, enhanced plant availability, improved plant efficiency, optimized staffing levels, enhanced cost-effectiveness, compliance with today's international standards. In this context special attention is paid to the economical aspects and to the increase of plant availability. (author). 6 figs

Modern design methods of hydraulic machines according to a quality system; Moderne tecniche di progettazione delle macchine idrauliche a garanzia della qualita`

Energy Technology Data Exchange (ETDEWEB)

Rossi, G.; Romolotti, F.; Lazzaro, B. [Voith Riva Hydr s.p.a., Milan (Italy)

1998-03-01

The article underlines how the adoption of a Quality System in line with the ISO 9001 Code is an essential instrument that is necessary to safely manage the complexity of the calculation, control and organization methods connected to the unavoidable sharing out of competence relevant to design, construction and installation of modern hydraulic machines. [Italiano] L`articolo sottolinea come l`adozione di un Sistema Qualita` in linea con la norma ISO 9001, sia strumento indispensabile per la sicura gestione della maggior complessita` dei metodi di calcolo, di controllo e di organizzazione legati all`inevitabile frazionamento delle competenze relative alla progettazione, costruzione e installazione delle moderne macchine idrauliche.

Documenting control system functionality for digital control implementations

International Nuclear Information System (INIS)

Harber, J.; Borairi, M.; Tikku, S.; Josefowicz, A.

2006-01-01

In past CANDU designs, plant control was accomplished by a combination of digital control computers, analogue controllers, and hardwired relay logic. Functionality for these various control systems, each using different hardware, was documented in varied formats such as text based program specifications, relay logic diagrams, and other various specification documents. The choice of formats was influenced by the hardware used and often required different specialized skills for different applications. The programmable electronic systems in new CANDU designs are realized in a manner consistent with latest international standards (e.g., the IEC 61513 standard). New CANDU designs make extensive use of modern digital control technology, with the benefit that functionality can be implemented on a limited number of control platforms, reducing development and maintenance cost. This approach can take advantage of tools that allow the plant control system functional and performance requirements to be documented using graphical representations. Modern graphical methods supplemented by information databases can be used to provide a clear and comprehensive set of requirements for software and system development. Overview diagrams of system functionality provide a common understanding of the system boundaries and interfaces. Important requirements are readily traced through the development process. This improved reviewability helps to ensure consistency with the safety and and production design requirements of the system. Encapsulation of commonly used functions into custom-defined function blocks, such as typical motor control centre interfaces, process interlocks, median selects etc, eases the burden on designers to understand and analyze the detailed functionality of each instance of use of this logic. A library of encapsulated functions will be established for complex functions that are reused in the control logic development. By encapsulation and standardisation of such

User interaction in modern web information systems

NARCIS (Netherlands)

Barna, P.; Houben, G.J.P.M.; De Bra, P.M.E.

2003-01-01

Modern Information Systems based on Web technologies (Web-based Information Systems - WIS) typically generate hypermedia presentations according to the user needs. Hera is our model-driven methodology specifying the design cycle and the architecture framework for WIS. To avoid additional expensive

Modernization of safety system for the radiation facility for industrial sterilization

International Nuclear Information System (INIS)

Drndarevic, V.; Djuric, D.; Koturovic, A.; Arandjelovic, M.; Mikic, R.

1995-01-01

Modernization of the existing safety system of the radiation facility for industrial sterilization at the Vinca Institute of nuclear science is done. In order to improve radiation safety of the facility, the latest recommendations and requirements of IAEA have been implemented. Concept and design of the modernized system are presented. The new elements of the safety system are described and the improvements achieved by means of this modernization are pointed out. (author)

Modern control of mineral wool production process

Directory of Open Access Journals (Sweden)

Stankov Stanko P.

2013-01-01

Full Text Available In this paper, the control of the plant for mineral wool production consisting of a number of the technological units of different sizes and complexity is considered. The application of modern equipment based on PLC (Programmable Logic Controller and SCADA (Supervisory Control And Data Acquisition configuration provides optimal control of technological process. Described supervisory and control system is consisting of a number of units doing decentralized distributed control of technological entities where all possible situation are considered during work of machines and devices, which are installed in electric drive and are protected from technological and electrical accident. Transformer station and diesel engine, raw materials transport and dosage, processes in dome oven, centrifuges, polycondensation (PC chamber, burners, compressor station, binder preparation and dosage, wool cutting, completed panel packing and their transport to storehouse are controlled. Process variables and parameters like as level, flow, velocity, temperature, pressure, etc. are controlled. Control system is doing identification of process states changes, diagnostic and prediction of errors and provides prediction of behavior of control objects when input flows of materials and generates optimal values of control variables due to decreasing downtime and technic - economical requires connected to wool quality to be achieved. Supervisory and control system either eliminates unwanted changes in the production line or restricts them within the allowable limits according to the technology. In this way, the optimization of energy and raw materials consumption and appropriate products quality is achieved, where requirements are satisfied in accordance with process safety and environmental standards. SCADA provides a visual representation of controlled and uncontrolled parts of the technological process, processing alarms and events, monitoring of the changes of relevant

Global Drainage Patterns to Modern Terrestrial Sedimentary Basins and its Influence on Large River Systems

Science.gov (United States)

Nyberg, B.; Helland-Hansen, W.

2017-12-01

Long-term preservation of alluvial sediments is dependent on the hydrological processes that deposit sediments solely within an area that has available accomodation space and net subsidence know as a sedimentary basin. An understanding of the river processes contributing to terrestrial sedimentary basins is essential to fundamentally constrain and quantify controls on the modern terrestrial sink. Furthermore, the terrestrial source to sink controls place constraints on the entire coastal, shelf and deep marine sediment routing systems. In addition, the geographical importance of modern terrestrial sedimentary basins for agriculture and human settlements has resulted in significant upstream anthropogenic catchment modification for irrigation and energy needs. Yet to our knowledge, a global catchment model depicting the drainage patterns to modern terrestrial sedimentary basins has previously not been established that may be used to address these challenging issues. Here we present a new database of 180,737 global catchments that show the surface drainage patterns to modern terrestrial sedimentary basins. This is achieved by using high resolution river networks derived from digital elevation models in relation to newly acquired maps on global modern sedimentary basins to identify terrestrial sinks. The results show that active tectonic regimes are typically characterized by larger terrestrial sedimentary basins, numerous smaller source catchments and a high source to sink relief ratio. To the contrary passive margins drain catchments to smaller terrestrial sedimentary basins, are composed of fewer source catchments that are relatively larger and a lower source to sink relief ratio. The different geomorphological characteristics of source catchments by tectonic setting influence the spatial and temporal patterns of fluvial architecture within sedimentary basins and the anthropogenic methods of exploiting those rivers. The new digital database resource is aimed to help

Insufficient Governance Over Logistics Modernization Program System Development

Science.gov (United States)

2010-11-02

Controls Over the Prevalidation of DOD Commercial Payments,” March 2, 2007 Army USAAA Report No. A-2007-0205- FFM , “Logistics Modernization Program...0163- FFM , “FY 03–FY 05 Obligations Recorded in the Logistics Modernization Program,” July 27, 2007 USAAA Report No. A-2007-0154-ALR, “Follow up...Audit of Aged Accounts–U.S. Army Communications-Electronics Life Cycle Management Command,” July 2, 2007 USAAA Report No. A-2006-0234- FFM

First-of-A-Kind Control Room Modernization Project Plan

Energy Technology Data Exchange (ETDEWEB)

Thomas, Kenneth David [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2016-02-01

This project plan describes a comprehensive approach to the design of an end-state concept for a modernized control room for Palo Verde. It describes the collaboration arrangement between the DOE LWRS Program Control Room Modernization Project and the APS Palo Verde Nuclear Generating Station. It further describes the role of other collaborators, including the Institute for Energy Technology (IFE) and the Electric Power Research Institute (EPRI). It combines advanced tools, methodologies, and facilities to enable a science-based approach to the validation of applicable engineering and human factors principles for nuclear plant control rooms. It addresses the required project results and documentation to demonstrate compliance with regulatory requirements. It describes the project tasks that will be conducted in the project, and the deliverable reports that will be developed through these tasks. This project plan will be updated as new tasks are added and as project milestones are completed. It will serve as an ongoing description on the project both for project participants and for industry stakeholders.

Viability Analysis of Waste Tires as Material for Rail Vibration and Noise Control in Modern Tram Track Systems

Directory of Open Access Journals (Sweden)

Caiyou Zhao

2015-01-01

Full Text Available This research study focused on the effect of using damping chamber elements made from waste tires on railway noise reduction. First, the energy absorption characteristics of damping chamber elements with various gradation combinations and compaction indices were measured in the laboratory using compression testing. The laboratory compression results demonstrated that the optimal gradation combination of damping chamber elements is as follows: the content of fine rubber particles is 10%, the content of coarse granules is 90%, and the optimal compaction index is 0.98. Next, the findings from the laboratory compression-test studies were used to produce damping chamber elements that were applied to a full-scale modern track model in the laboratory. The measurements of the dynamic properties indicated that the damping chamber elements could significantly reduce the vibration levels of the rail head. Finally, the damping chamber elements, which had been proven effective through laboratory dynamic tests, were widely applied to test rail sections in the field. The field tests demonstrated that damping chamber elements can significantly increase the track vibration decay rate in the frequency range of 200–10000 Hz. Therefore, damping chamber elements made from waste tires are able to control rail vibration and noise in modern tram track systems.

Design and modernization of the control room with of the new digital I and C systems; El diseno y modernizacion de las salas de control con los nuevos sistemas de I and C digital

Energy Technology Data Exchange (ETDEWEB)

Fernandez, L. A.; Ortega, F.; Rejas, L.

2011-07-01

The use of the new digital I and c systems in the design of the new nuclear power plants, as well as the modernization of the existing ones, implies relevant changes in the control room design. New I and C systems provide new features that affect the control room operating concept, therefore a detailed analysis is required to take into consideration all the operating and human factor aspects. based on Tecnatom's experience, this article presents the methodological approach used as well as the most relevant aspects of this kind of project. (Author)

DIRECTION OF MODERNIZATION OF THE ARCTIC MARINE TRANSPORTATION SYSTEM

Directory of Open Access Journals (Sweden)

N. I. Komkov

2014-01-01

Full Text Available The article deals with the modern processes of formation and development of the marine transportation system in the Russian Arctic, analyzes its problem areas and reserves growth. Shows the status and prospects of development of cargo specialized fl eet of ice-class and icebreakers. Particular attention is paid to infrastructure, port management, port The possibility of creating special economic zones. Systematized direction of modernization of the Arctic marine transportation system.

Training Center for Industrial Control Systems

Directory of Open Access Journals (Sweden)

V. D. Yezhov

2013-01-01

Full Text Available We consider the application of embedded microcontrollers and industrial controllers with built-in operating systems.With the development of embedded operating systems and technology of open standard IEC 61131-3 product developer can write their own program management and support staff – to modernize management program.

Recommended Practice: Creating Cyber Forensics Plans for Control Systems

Energy Technology Data Exchange (ETDEWEB)

Eric Cornelius; Mark Fabro

2008-08-01

Cyber forensics has been in the popular mainstream for some time, and has matured into an information-technology capability that is very common among modern information security programs. The goal of cyber forensics is to support the elements of troubleshooting, monitoring, recovery, and the protection of sensitive data. Moreover, in the event of a crime being committed, cyber forensics is also the approach to collecting, analyzing, and archiving data as evidence in a court of law. Although scalable to many information technology domains, especially modern corporate architectures, cyber forensics can be challenging when being applied to non-traditional environments, which are not comprised of current information technologies or are designed with technologies that do not provide adequate data storage or audit capabilities. In addition, further complexity is introduced if the environments are designed using proprietary solutions and protocols, thus limiting the ease of which modern forensic methods can be utilized. The legacy nature and somewhat diverse or disparate component aspects of control systems environments can often prohibit the smooth translation of modern forensics analysis into the control systems domain. Compounded by a wide variety of proprietary technologies and protocols, as well as critical system technologies with no capability to store significant amounts of event information, the task of creating a ubiquitous and unified strategy for technical cyber forensics on a control systems device or computing resource is far from trivial. To date, no direction regarding cyber forensics as it relates to control systems has been produced other than what might be privately available from commercial vendors. Current materials have been designed to support event recreation (event-based), and although important, these requirements do not always satisfy the needs associated with incident response or forensics that are driven by cyber incidents. To address these

Design techniques for mutlivariable flight control systems

Science.gov (United States)

1981-01-01

Techniques which address the multi-input closely coupled nature of advanced flight control applications and digital implementation issues are described and illustrated through flight control examples. The techniques described seek to exploit the advantages of traditional techniques in treating conventional feedback control design specifications and the simplicity of modern approaches for multivariable control system design.

Analysis of Access Control Policies in Operating Systems

Science.gov (United States)

Chen, Hong

2009-01-01

Operating systems rely heavily on access control mechanisms to achieve security goals and defend against remote and local attacks. The complexities of modern access control mechanisms and the scale of policy configurations are often overwhelming to system administrators and software developers. Therefore, mis-configurations are common, and the…

Designing a machinery control system (MCS) security testbed

OpenAIRE

Desso, Nathan H.

2014-01-01

Approved for public release; distribution is unlimited Industrial control systems (ICS) face daily cyber security threats, can have a significant impact to the security of our nation, and present a difficult challenge to defend. Critical infrastructures, including military systems like the machinery control systems (MCS) found onboard modern U.S. warships, are affected because of their use of commercial automation solutions. The increase of automated control systems within the U.S. Navy sa...

Modernization of the system integrated ERIS computer (SIEC) of the nuclear power plant Cofrentes

International Nuclear Information System (INIS)

Garcia, R.; Ramos, M.; Mendez, J.; Zuriaga, J. V.

2011-01-01

The complete replacement of the SIEC of Nuclear Power Cofrentes is framed within the process of modernization of systems instrumentation and control in which the Spanish nuclear power plants are immersed, process caused by an increase in security, as well as the obsolescence and lack of spare parts.

Modernizing the Regulatory System for Biotechnology Products

Science.gov (United States)

This Web page describes the continuing effort to modernize the federal regulatory system for biotechnology products as well as clarify various roles of EPA, FDA and USDA in evaluating new biotechnology products.

Vacuum control system of VEC

International Nuclear Information System (INIS)

Roy, Anindya; Bhole, R.B.; Bandopadhyay, D.L.; Mukhopadhyay, B.; Pal, Sarbajit; Sarkar, D.

2009-01-01

As a part of modernization of VEC (Variable Energy Cyclotron), the Vacuum Control System is being upgraded to PLC based automated system from initial Relay based Manual system. EPICS (Experimental Physics and Industrial Control System), a standard open source software tool for designing distributed control system, is chosen for developing the supervisory control software layer, leading towards a unified distributed control architecture of VEC Control System. A Modbus - TCP based IOC (I/O Controller) has been developed to communicate control data to PLC using Ethernet-TCP LAN. Keeping in mind, the operators' familiarity with MS-Windows, a MS-Windows based operator interface is developed using VB6. It is also used to test and evaluate EPICS compatibility to MS Windows. Several MS Windows ActiveX components e.g. text display, image display, alarm window, set-point input etc. have been developed incorporating Channel Access library of EPICS. Use of such components ease the programming complexity and reduce developmental time of the operator interface. The system is in the final phase of commissioning. (author)

Control Systems Lab Using a LEGO Mindstorms NXT Motor System

Science.gov (United States)

Kim, Y.

2011-01-01

This paper introduces a low-cost LEGO Mindstorms NXT motor system for teaching classical and modern control theories in standard third-year undergraduate courses. The LEGO motor system can be used in conjunction with MATLAB, Simulink, and several necessary toolboxes to demonstrate: 1) a modeling technique; 2) proportional-integral-differential…

Anger and its control in Graeco-Roman and modern psychology.

Science.gov (United States)

Schimmel, S

1979-11-01

Modern psychologists have studied the phenomena of anger and hostility with diverse methodologies and from a variety of theoretical orientations. The close relationships between anger and aggression, psychosomatic disorder and personal unhappiness, make the understanding and control of anger an important individual and social goal. For all of its sophistication and accomplishment, however, most of the modern research demonstrates, to its disadvantage, a lack of historical perspective with respect to the analysis and treatment of anger, whether normal or pathological. This attitude has deprived psychology of a rich source of empirical observations, intriguing, testable hypotheses, and ingenious techniques of treatment. Of the literature that has been neglected, the analyses of the emotion of anger in the writings of Greek and Roman moral philosophers, particularly Aristotle (4th century B.C.), Seneca (1st century A.D.) and Plutarch (early 2nd century A.D.) are of particular interest. Although modern analyses and methods of treatment are in some ways more refined and more quantitatively precise, and are often subjected to validation and modification by empirical-experimental tests, scientific psychology has, to date, contributed relatively little to the understanding and control of anger that is novel except for research on its physiological dimensions. We can still benefit from the insight, prescriptions and procedures of the classicists, who in some respects offer more powerful methods of control than the most recently published works. Naturally, the modern psychotherapist or behavior therapist can and must go beyond the ancients, as is inherent in all scientific and intellectual progress, but there are no scientific or rational grounds for ignoring them as has been done for 75 years.

Wind power in modern power systems

DEFF Research Database (Denmark)

Chen, Zhe

2013-01-01

In recent years, wind power is experiencing a rapid growth, and large-scale wind turbines/wind farms have been developed and connected to power systems. However, the traditional power system generation units are centralized located synchronous generators with different characteristics compared...... with wind turbines. This paper presents an overview of the issues about integrating large-scale wind power plants into modern power systems. Firstly, grid codes are introduced. Then, the main technical problems and challenges are presented. Finally, some possible technical solutions are discussed....

Control Systems with Normalized and Covariance Adaptation by Optimal Control Modification

Science.gov (United States)

Nguyen, Nhan T. (Inventor); Burken, John J. (Inventor); Hanson, Curtis E. (Inventor)

2016-01-01

Disclosed is a novel adaptive control method and system called optimal control modification with normalization and covariance adjustment. The invention addresses specifically to current challenges with adaptive control in these areas: 1) persistent excitation, 2) complex nonlinear input-output mapping, 3) large inputs and persistent learning, and 4) the lack of stability analysis tools for certification. The invention has been subject to many simulations and flight testing. The results substantiate the effectiveness of the invention and demonstrate the technical feasibility for use in modern aircraft flight control systems.

Concluding from operating experience to instrumentation and control systems

International Nuclear Information System (INIS)

Pleger, H.; Heinsohn, H.

1997-01-01

Where conclusions are drawn from operating experience to instrumentation and control systems, two general statements should be made. First: There have been braekdowns, there have also been deficiencies, but in principle operating experience with the instrumentation and control systems of German nuclear power plants has been good. With respect to the debates about the use of modern digital instrumentation and control systems it is safe to say, secondly, that the instrumentation and control systems currently in use are working reliably. Hence, there is no need at present to replace existing systems for reasons of technical safety. However, that time will come. It is a good thing, therefore, that the use of modern digital instrumentation and control systems is to begin in the field of limiting devices. The operating experience which will thus be accumulated will benefit digital instrumentation and control systems in their qualification process for more demanding applications. This makes proper logging of operating experience an important function, even if it cannot be transferred in every respect. All parties involved therefore should see to it that this operating experience is collected in accordance with criteria agreed upon so as to prevent unwanted surprises later on. (orig.) [de

Functionality and operation of fluoroscopic automatic brightness control/automatic dose rate control logic in modern cardiovascular and interventional angiography systems: a report of Task Group 125 Radiography/Fluoroscopy Subcommittee, Imaging Physics Committee, Science Council.

Science.gov (United States)

Rauch, Phillip; Lin, Pei-Jan Paul; Balter, Stephen; Fukuda, Atsushi; Goode, Allen; Hartwell, Gary; LaFrance, Terry; Nickoloff, Edward; Shepard, Jeff; Strauss, Keith

2012-05-01

Task Group 125 (TG 125) was charged with investigating the functionality of fluoroscopic automatic dose rate and image quality control logic in modern angiographic systems, paying specific attention to the spectral shaping filters and variations in the selected radiologic imaging parameters. The task group was also charged with describing the operational aspects of the imaging equipment for the purpose of assisting the clinical medical physicist with clinical set-up and performance evaluation. Although there are clear distinctions between the fluoroscopic operation of an angiographic system and its acquisition modes (digital cine, digital angiography, digital subtraction angiography, etc.), the scope of this work was limited to the fluoroscopic operation of the systems studied. The use of spectral shaping filters in cardiovascular and interventional angiography equipment has been shown to reduce patient dose. If the imaging control algorithm were programmed to work in conjunction with the selected spectral filter, and if the generator parameters were optimized for the selected filter, then image quality could also be improved. Although assessment of image quality was not included as part of this report, it was recognized that for fluoroscopic imaging the parameters that influence radiation output, differential absorption, and patient dose are also the same parameters that influence image quality. Therefore, this report will utilize the terminology "automatic dose rate and image quality" (ADRIQ) when describing the control logic in modern interventional angiographic systems and, where relevant, will describe the influence of controlled parameters on the subsequent image quality. A total of 22 angiography units were investigated by the task group and of these one each was chosen as representative of the equipment manufactured by GE Healthcare, Philips Medical Systems, Shimadzu Medical USA, and Siemens Medical Systems. All equipment, for which measurement data were

Functionality and operation of fluoroscopic automatic brightness control/automatic dose rate control logic in modern cardiovascular and interventional angiography systems: A Report of Task Group 125 Radiography/Fluoroscopy Subcommittee, Imaging Physics Committee, Science Council

Energy Technology Data Exchange (ETDEWEB)

Rauch, Phillip; Lin, Pei-Jan Paul; Balter, Stephen; Fukuda, Atsushi; Goode, Allen; Hartwell, Gary; LaFrance, Terry; Nickoloff, Edward; Shepard, Jeff; Strauss, Keith [Henry Ford Health System, Detroit, Michigan 48202 (United States); Beth Israel Deaconess Medical Center, Boston, Massachusetts 02115 (United States); Columbia University Medical Center, New York, New York 10032 (United States); Shiga Medical Center for Children, Moriyama City, Shiga-Ken, Japan 524-0022 (Japan); University of Virginia Health Science Center, Charlottesville, Virginia 22908 (United States); Baystate Health Systems, Inc., Springfield, Massachusetts 01199 (United States); Columbia University Medical Center, New York, New York 10032 (United States); University of Texas M.D. Anderson Cancer Center, Houston, Texas 77030 (United States); Cincinnati Children' s Hospital Medical Center, Cincinnati, Ohio 45229 (United States)

2012-05-15

Task Group 125 (TG 125) was charged with investigating the functionality of fluoroscopic automatic dose rate and image quality control logic in modern angiographic systems, paying specific attention to the spectral shaping filters and variations in the selected radiologic imaging parameters. The task group was also charged with describing the operational aspects of the imaging equipment for the purpose of assisting the clinical medical physicist with clinical set-up and performance evaluation. Although there are clear distinctions between the fluoroscopic operation of an angiographic system and its acquisition modes (digital cine, digital angiography, digital subtraction angiography, etc.), the scope of this work was limited to the fluoroscopic operation of the systems studied. The use of spectral shaping filters in cardiovascular and interventional angiography equipment has been shown to reduce patient dose. If the imaging control algorithm were programmed to work in conjunction with the selected spectral filter, and if the generator parameters were optimized for the selected filter, then image quality could also be improved. Although assessment of image quality was not included as part of this report, it was recognized that for fluoroscopic imaging the parameters that influence radiation output, differential absorption, and patient dose are also the same parameters that influence image quality. Therefore, this report will utilize the terminology ''automatic dose rate and image quality'' (ADRIQ) when describing the control logic in modern interventional angiographic systems and, where relevant, will describe the influence of controlled parameters on the subsequent image quality. A total of 22 angiography units were investigated by the task group and of these one each was chosen as representative of the equipment manufactured by GE Healthcare, Philips Medical Systems, Shimadzu Medical USA, and Siemens Medical Systems. All equipment, for which

Functionality and operation of fluoroscopic automatic brightness control/automatic dose rate control logic in modern cardiovascular and interventional angiography systems: A Report of Task Group 125 Radiography/Fluoroscopy Subcommittee, Imaging Physics Committee, Science Council

International Nuclear Information System (INIS)

Rauch, Phillip; Lin, Pei-Jan Paul; Balter, Stephen; Fukuda, Atsushi; Goode, Allen; Hartwell, Gary; LaFrance, Terry; Nickoloff, Edward; Shepard, Jeff; Strauss, Keith

2012-01-01

Task Group 125 (TG 125) was charged with investigating the functionality of fluoroscopic automatic dose rate and image quality control logic in modern angiographic systems, paying specific attention to the spectral shaping filters and variations in the selected radiologic imaging parameters. The task group was also charged with describing the operational aspects of the imaging equipment for the purpose of assisting the clinical medical physicist with clinical set-up and performance evaluation. Although there are clear distinctions between the fluoroscopic operation of an angiographic system and its acquisition modes (digital cine, digital angiography, digital subtraction angiography, etc.), the scope of this work was limited to the fluoroscopic operation of the systems studied. The use of spectral shaping filters in cardiovascular and interventional angiography equipment has been shown to reduce patient dose. If the imaging control algorithm were programmed to work in conjunction with the selected spectral filter, and if the generator parameters were optimized for the selected filter, then image quality could also be improved. Although assessment of image quality was not included as part of this report, it was recognized that for fluoroscopic imaging the parameters that influence radiation output, differential absorption, and patient dose are also the same parameters that influence image quality. Therefore, this report will utilize the terminology ''automatic dose rate and image quality'' (ADRIQ) when describing the control logic in modern interventional angiographic systems and, where relevant, will describe the influence of controlled parameters on the subsequent image quality. A total of 22 angiography units were investigated by the task group and of these one each was chosen as representative of the equipment manufactured by GE Healthcare, Philips Medical Systems, Shimadzu Medical USA, and Siemens Medical Systems. All equipment, for which measurement data were

Monitoring, control and protection of interconnected power systems

CERN Document Server

Häger, Ulf; Voropai, Nikolai

2014-01-01

This book presents new tools and methods for monitoring, control and protection of large scale power systems, adapting Smart Grid technologies based on wide area data exchange in combination with modern measurement devices and advanced network controllers.

System Identification, Environmental Modelling, and Control System Design

CERN Document Server

Garnier, Hugues

2012-01-01

System Identification, Environmetric Modelling, and Control Systems Design is dedicated to Professor Peter Young on the occasion of his seventieth birthday. Professor Young has been a pioneer in systems and control, and over the past 45 years he has influenced many developments in this field. This volume is comprised of a collection of contributions by leading experts in system identification, time-series analysis, environmetric modelling and control system design – modern research in topics that reflect important areas of interest in Professor Young’s research career. Recent theoretical developments in and relevant applications of these areas are explored treating the various subjects broadly and in depth. The authoritative and up-to-date research presented here will be of interest to academic researcher in control and disciplines related to environmental research, particularly those to with water systems. The tutorial style in which many of the contributions are composed also makes the book suitable as ...

Modernization of supervision and control central store of the Cabril RBMA; Modernizacion de la supervision y el control del almacen centralizado de RBMA El Cabril

Energy Technology Data Exchange (ETDEWEB)

Arribas de la Fuente, M.; Mena, V.; Navarro Santos, M.

2012-07-01

The modernization of the control room Cabril through the use of new technology has allowed the unification of control and monitoring of all systems of the center, giving the Cabril greater versatility and ease of development operations the plant, as well as enabling the expansion and continuous improvement is promoting the installation from the beginning of its activity.

Modernization of the CDTN IPR-R1 TRIGA reactor instrumentation and control

International Nuclear Information System (INIS)

Mesquita, A.Z.; Costa, A.C.L.; Souza, R.M.G.P.

2009-01-01

The control system of the IPR-R1 was changed in 1995. Although since the year's 80 was generalized the use of microprocessor technology and video monitors for visual interface, in the IPR-R1 control room it was used analogical system by relay-based logic, and were maintained the mechanical strip chart recorders (ink-pen drive) to measure, monitor and store the operational parameters. It was maintained the measure and the control of, practically, the same variables of the original system, although the reactor power already have been upgraded to 100 kW and began the studies to increase it to 250 kW, which is the current core configuration. For 250 kW operations the fuel heat transfer becomes important and new parameters should be used as safety operational limits. A state-of-the-art instrumentation and control system using microprocessor technology is proposed to replace the present analogical systems. The new system can eliminates most manual data logging, provides automatic or manual reactor operation modes, provides complete real-time operator display, replays historical operating data on monitor or printer, eliminates spare parts replacement problems and meets all applicable international standards as NRC and IEE specifications. This paper describes the research project in process in CDTN that has as objective the modernization of the IPR-R1 TRIGA reactor instrumentation and control of the operational variables. The project also will improve the accomplishment of neutronic and thermal-hydraulic experiments, foreseen in the CDTN research program. (author)

Power system small signal stability analysis and control

CERN Document Server

Mondal, Debasish; Sengupta, Aparajita

2014-01-01

Power System Small Signal Stability Analysis and Control presents a detailed analysis of the problem of severe outages due to the sustained growth of small signal oscillations in modern interconnected power systems. The ever-expanding nature of power systems and the rapid upgrade to smart grid technologies call for the implementation of robust and optimal controls. Power systems that are forced to operate close to their stability limit have resulted in the use of control devices by utility companies to improve the performance of the transmission system against commonly occurring power system

Kenyan female sex workers' use of female-controlled nonbarrier modern contraception: do they use condoms less consistently?

Science.gov (United States)

Yam, Eileen A; Okal, Jerry; Musyoki, Helgar; Muraguri, Nicholas; Tun, Waimar; Sheehy, Meredith; Geibel, Scott

2016-03-01

To examine whether nonbarrier modern contraceptive use is associated with less consistent condom use among Kenyan female sex workers (FSWs). Researchers recruited 579 FSWs using respondent-driven sampling. We conducted multivariate logistic regression to examine the association between consistent condom use and female-controlled nonbarrier modern contraceptive use. A total of 98.8% reported using male condoms in the past month, and 64.6% reported using female-controlled nonbarrier modern contraception. In multivariate analysis, female-controlled nonbarrier modern contraceptive use was not associated with decreased condom use with clients or nonpaying partners. Consistency of condom use is not compromised when FSWs use available female-controlled nonbarrier modern contraception. FSWs should be encouraged to use condoms consistently, whether or not other methods are used simultaneously. Copyright © 2016 Elsevier Inc. All rights reserved.

Plant Modernization Programs

International Nuclear Information System (INIS)

O'Hara, John

2004-01-01

Most nuclear plants were designed and built from the 1960's through the 1990's. These plants employ predominantly analog instrumentation and control (I and C) technology, and their control rooms are made up of primarily hardwired controls (e.g., switches, knobs and handles) and displays (e.g., gauges, linear scales and indicator lights). Over the past several years, these plants have been modernized with digital I and C and computer-based human-system interfaces (HSIs) such as software-based process controls, touch-screen interfaces and large-screen, overview displays. As these computer based HIS technologies are integrated into control rooms based on conventional technology, hybrid control rooms are created. The paper summarizes lessons learned from the study of plant modernization programs over the past ten years so that they can be used to help improve the modification process. While the research focused on the impact of technology change on human performance, a number of organizational and programmatic issues were observed as well. Eleven lessons learned are presented

Advances in power system modelling, control and stability analysis

CERN Document Server

Milano, Federico

2016-01-01

Advances in Power System Modelling, Control and Stability Analysis captures the variety of new methodologies and technologies that are changing the way modern electric power systems are modelled, simulated and operated.

Havens and Cages: Reinventing States and Households in the Modern World-System

Directory of Open Access Journals (Sweden)

Peter J. Taylor

2015-08-01

Full Text Available In the work of Immanuel Wallerstein the concepts of modern world-system and capitalist world-economy are used interchangeably; they are alternative names for the historical system we are currently living in. In the substance of his work, however, Wallerstein has been more concerned with capitalism than modernity. At one level this is unimportant because, if they are indeed ‘two sides of the same coin,’ understanding one must enhance inevitably our knowledge of the other. But, of course, it is never as simple asthat. When we choose to think of our contemporary world as either capitalist or modern, we take on board a different social theoretical baggage. It was this train of thought which led me to ask “what’s modern about the modern world-system?” (Taylor, 1996a and this essay is part of a continuing project (Taylor, 1996b; 1999 to link Wallerstein’s (1984: chapter 3 ‘institutional vortex’ to Marshall Berman’s (1982: Introduction ‘modern maelstrom.’

A Segmented Signal Progression Model for the Modern Streetcar System

Directory of Open Access Journals (Sweden)

Baojie Wang

2015-01-01

Full Text Available This paper is on the purpose of developing a segmented signal progression model for modern streetcar system. The new method is presented with the following features: (1 the control concept is based on the assumption of only one streetcar line operating along an arterial under a constant headway and no bandwidth demand for streetcar system signal progression; (2 the control unit is defined as a coordinated intersection group associated with several streetcar stations, and the control joints must be streetcar stations; (3 the objective function is built to ensure the two-way streetcar arrival times distributing within the available time of streetcar phase; (4 the available time of streetcar phase is determined by timing schemes, intersection structures, track locations, streetcar speeds, and vehicular accelerations; (5 the streetcar running speed is constant separately whether it is in upstream or downstream route; (6 the streetcar dwell time is preset according to historical data distribution or charging demand. The proposed method is experimentally examined in Hexi New City Streetcar Project in Nanjing, China. In the experimental results, the streetcar system operation and the progression impacts are shown to affect transit and vehicular traffic. The proposed model presents promising outcomes through the design of streetcar system segmented signal progression, in terms of ensuring high streetcar system efficiency and minimizing negative impacts on transit and vehicular traffic.

New Main Ring control system

International Nuclear Information System (INIS)

Seino, K.; Anderson, L.; Ducar, R.; Franck, A.; Gomilar, J.; Hendricks, B.; Smedinghoff, J.

1990-03-01

The Fermilab Main Ring control system has been operational for over sixteen years. Aging and obsolescence of the equipment make the maintenance difficult. Since the advent of the Tevatron, considerable upgrades have been made to the controls of all the Fermilab accelerators except the Main Ring. Modernization of the equipment and standardization of the hardware and software have thus become inevitable. The Tevatron CAMAC serial system has been chosen as a basic foundation in order to make the Main Ring control system compatible with the rest of the accelerator complex. New hardware pieces including intelligent CAMAC modules have been designed to satisfy unique requirements. Fiber optic cable and repeaters have been installed in order to accommodate new channel requirements onto the already saturated communication medium system. 8 refs., 2 figs

ESIF 2016: Modernizing Our Grid and Energy System

Energy Technology Data Exchange (ETDEWEB)

Van Becelaere, Kimberly [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2017-03-09

This 2016 annual report highlights work conducted at the Energy Systems Integration Facility (ESIF) in FY 2016, including grid modernization, high-performance computing and visualization, and INTEGRATE projects.

Computer-integrated electric-arc melting process control system

OpenAIRE

Дёмин, Дмитрий Александрович

2014-01-01

Developing common principles of completing melting process automation systems with hardware and creating on their basis rational choices of computer- integrated electricarc melting control systems is an actual task since it allows a comprehensive approach to the issue of modernizing melting sites of workshops. This approach allows to form the computer-integrated electric-arc furnace control system as part of a queuing system “electric-arc furnace - foundry conveyor” and consider, when taking ...

Modernization of instrumentation and control systems in nuclear power plants. Working materials. Proceedings of a specialists` meeting held in Garching, Germany, 4-7 July 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-31

The Specialists` Meeting on ``Modernization of Instrumentation and Control Systems in Nuclear Power Plants`` was organized by the IAEA (jointly by Division of Nuclear Power and Division of Nuclear Safety) in co-operation with Institute for Safety Technology (ISTec) and held in Garching, Germany from 4 to 7 July 1995 (The Meeting Chairman - Dr. W. Bastl). The meeting brought together experts on power plant operation with experts on application of today`s instrumentation and control technology. In this way, a match was made between those knowing the industry needs and requirements and those knowing the potentials of the technology. Refs, figs and tabs.

Development of distributed measurement and control systems for application in electrical energy systems

Directory of Open Access Journals (Sweden)

Gajić Tomislav

2013-01-01

Full Text Available In this paper LPC1766 microcontroller based network capable application processor (NCAP system, is described. This system is intended to be used in modern distributed control and monitoring systems for application in power plants and industry, as well as in modern electricity distribution networks. In order to do that it is necessary to analyze different aspects of the system, like signal processing part or communication requirements. The chosen microcontroller has enough resources to satisfy requirements of an transducer interface module (TIM. Beside the realization of NCAp and TIM controllers it is necessary to develop the necessary measurement modules, in order to realize measurement-control systems. The developed layout could be connected to actuators to the local area network (LAN, as well. If the local LAN is connected to the internet it is possible to monitor and configure measurement modules form the remote site. Having in mind the growing complexity in control systems, it has been a real challenge to detect a diagnose problems in today's large scale distributed systems. Implementation of the proposed module could potentially reduce the time necessary to extract necessary information from the abundant quantity of information that are usually provided by the complex distributed systems.

Judicial System Restructuring and Modernization in Abu Dhabi

Directory of Open Access Journals (Sweden)

Lawrence Groo

2008-01-01

Full Text Available The purpose of this article is to provide a practical overview of the recently initiated modernization of Abu Dhabi’s judicial system. Beginning in 2007, Abu Dhabi’s Government launched a comprehensive effort to transform the Emirate’s judicial system. While the implementation of these reforms is ongoing, with the adoption of the law in May 2007 establishing the new judicial architecture the initial phase of the modernization program is already complete. The restructuring process encompasses court management and administration reform, a new judicial training regime, a redesigned organizational structure for the Emirate’s Judicial Department and courts, and the establishment of a system-wide strategic planning and budgeting process. Many of these initiatives are supported by applying advanced IT-based applications. Given the early achievements and ambitious broader aims of the restructuring process, Abu Dhabi’s example is relevant not only to the other Emirates within the Federal UAE system, but also within the context of the wider Middle East region.

Effect of yogic education system and modern education system on sustained attention.

Science.gov (United States)

Rangan, R; Nagendra, H R; Bhatt, Ramachandra

2009-01-01

Sustained attention is a vital function mediated by the right frontoparietal cortex. The Six Letter Cancellation Task (SLCT) measures sustained attention. Development of sustained attention in a yoga-based education system compared to a modern one is the theme of the present study. To compare the effectiveness of the Modern Education System (MES) and the Gurukula Education System (GES) in developing sustained attention. Forty nine boys (11-13 years) were selected from two residential schools, one MES and the other GES, providing similar ambiance and daily routines. The boys were matched for age and socioeconomic status. The GES educational program is based around integrated yoga modules while the MES provides a conventional modern education program. Sustained attention was assessed using the SLCT at the start and end of an academic year. Within groups, the pre-post test differences were significant for both groups. However, the between groups result showed improvement in the GES group compared to the MES group at a P < 0.001 significance level. The study suggests that both MES and GES improve sustained attention in school boys, but GES is more effective.

International Atomic Energy Agency specialists meeting on experience in ageing, maintenance, and modernization of instrumentation and control systems for improving nuclear power plant availability

Energy Technology Data Exchange (ETDEWEB)

1993-10-01

This report presents the proceedings of the Specialist`s Meeting on Experience in Aging, Maintenance and Modernization of Instrumentation and Control Systems for Improving Nuclear Power Plant Availability that was held at the Ramada Inn in Rockville, Maryland on May 5--7, 1993. The Meeting was presented in cooperation with the Electric Power Research Institute, Oak Ridge National Laboratory and the International Atomic Energy Agency. There were approximately 65 participants from 13 countries at the Meeting. Individual reports have been cataloged separately.

International Atomic Energy Agency specialists meeting on experience in ageing, maintenance, and modernization of instrumentation and control systems for improving nuclear power plant availability

International Nuclear Information System (INIS)

1993-10-01

This report presents the proceedings of the Specialist's Meeting on Experience in Aging, Maintenance and Modernization of Instrumentation and Control Systems for Improving Nuclear Power Plant Availability that was held at the Ramada Inn in Rockville, Maryland on May 5--7, 1993. The Meeting was presented in cooperation with the Electric Power Research Institute, Oak Ridge National Laboratory and the International Atomic Energy Agency. There were approximately 65 participants from 13 countries at the Meeting. Individual reports have been cataloged separately

Ukrainian Nuclear Society International Conference 'Modernization of the NPP with VVER reactor' (abstracts)

International Nuclear Information System (INIS)

Bar'yakhtar, V.G.

1999-01-01

Abstracts of the papers presented at International conference of the Ukrainian Nuclear Society 'Modernization of the NPP with VVER reactor'. The following problems are considered: improving the NPP's safety and reliability; reactor modernization, the lifetime prolongation; increasing of the reactor operating characteristics; methods of capacity factor increasing: refueling control, maintenance control; technical and economical aspects of NPP modernization; modernization of the automated control system of the fuel process at the NPP's; technical features and methods for the continued radiation and technology control at the NPP's; training, increasing the staff qualification and NPP modernization

The modern mental health system in Nepal: organizational persistence in the absence of legitimating myths.

Science.gov (United States)

Tausig, M; Subedi, S

1997-08-01

This paper advances an organizational explanation for the slow pace of modernization of mental health care systems in developing societies. In complement to cultural and political economic explanations of this condition, we suggest that the value of establishing modern systems in developing societies lies in the legitimation such structures provide for indigenous modernizing efforts vis-a-vis both indigenous and external audiences. The system need not meet actual levels of service demand. Its importance is in its symbolic value as an indicator of modernity. The result is a system in "permanent failure". Implications for institutional theory and the growth of modern mental health systems in developing societies are discussed.

A modern automatic Carriage-Trolley Position Control System for Dhruva fuelling machine

International Nuclear Information System (INIS)

Agrawal, Ankit; Hari Balakrishna; Narvekar, J.P.; Sanadhya, Vivek

2014-01-01

A fully automatic absolute encoder based position control system has been designed developed implemented and commissioned for the Dhruva Fuelling Machine A (FM/A). This supports both the coarse and fine positioning modes. Provision for fully manual positioning as a standby system has been retained. This system replaces the ageing peg counting based incremental positioner used briefly during the early period after the Dhruva FM/A was commissioned. The older system suffered from peg detection skipping problems; hence it was not being used. Only full manual positioning was being carried out. This paper describes the automatic Carriage Trolley Position Control System (CTPCS). (author)

Origins of modern economic system: England or Holland

Directory of Open Access Journals (Sweden)

Rozinskaya Natalia, A.

2015-06-01

Full Text Available This paper, following the approach of the Dutch scholars de Vries and vab der Woude, claims that the Netherlands, rather than England (as it is generally assumed, were the first country, which performed the transition from the traditional society to modern one. Identification of criteria distinguishing traditional and modern societies follows the works of W. Rostow, S. Kuznets and other authors who studied the issue. In order to prove the thesis, author compares urbanization level in Holland and in England, as well as degree of commercialization of those economies, and considers the process of commercial and productive specialization in the United Provinces. Besides that, the formation of modern-type institutional system in Holland is analyzed: the genesis of the markets of factors of production, development of monetary and credit systems and of institutional and technological basis of the industry, strengthening of competitive forces in the economy. Land ownership structure in Holland is considered and its role in genesis of the markets of factors of production. Attention is paid to technological basis of the industry, examined is the impact of immigration. It concludes that the Netherlands were the first country where modern economic growth, as defined by S. Kuznets, started. It was Holland where for the first time the markets of factors of production were formed and, what is particularly important, the industry began to operate on a competitive basis.

Long-Term Instrumentation, Information, and Control Systems (II&C) Modernization Future Vision and Strategy

Energy Technology Data Exchange (ETDEWEB)

Kenneth Thomas; Bruce Hallbert

2013-02-01

Life extension beyond 60 years for the U.S operating nuclear fleet requires that instrumentation and control (I&C) systems be upgraded to address aging and reliability concerns. It is impractical for the legacy systems based on 1970’s vintage technology operate over this extended time period. Indeed, utilities have successfully engaged in such replacements when dictated by these operational concerns. However, the replacements have been approached in a like-for-like manner, meaning that they do not take advantage of the inherent capabilities of digital technology to improve business functions. And so, the improvement in I&C system performance has not translated to bottom-line performance improvement for the fleet. Therefore, wide-scale modernization of the legacy I&C systems could prove to be cost-prohibitive unless the technology is implemented in a manner to enable significant business innovation as a means of off-setting the cost of upgrades. A Future Vision of a transformed nuclear plant operating model based on an integrated digital environment has been developed as part of the Advanced Instrumentation, Information, and Control (II&C) research pathway, under the Light Water Reactor (LWR) Sustainability Program. This is a research and development program sponsored by the U.S. Department of Energy (DOE), performed in close collaboration with the nuclear utility industry, to provide the technical foundations for licensing and managing the long-term, safe and economical operation of current nuclear power plants. DOE’s program focus is on longer-term and higher-risk/reward research that contributes to the national policy objectives of energy security and environmental security . The Advanced II&C research pathway is being conducted by the Idaho National Laboratory (INL). The Future Vision is based on a digital architecture that encompasses all aspects of plant operations and support, integrating plant systems, plant work processes, and plant workers in a

Long-Term Instrumentation, Information, and Control Systems (II&C) Modernization Future Vision and Strategy

Energy Technology Data Exchange (ETDEWEB)

Kenneth Thomas

2012-02-01

Life extension beyond 60 years for the U.S operating nuclear fleet requires that instrumentation and control (I&C) systems be upgraded to address aging and reliability concerns. It is impractical for the legacy systems based on 1970's vintage technology operate over this extended time period. Indeed, utilities have successfully engaged in such replacements when dictated by these operational concerns. However, the replacements have been approached in a like-for-like manner, meaning that they do not take advantage of the inherent capabilities of digital technology to improve business functions. And so, the improvement in I&C system performance has not translated to bottom-line performance improvement for the fleet. Therefore, wide-scale modernization of the legacy I&C systems could prove to be cost-prohibitive unless the technology is implemented in a manner to enable significant business innovation as a means of off-setting the cost of upgrades. A Future Vision of a transformed nuclear plant operating model based on an integrated digital environment has been developed as part of the Advanced Instrumentation, Information, and Control (II&C) research pathway, under the Light Water Reactor (LWR) Sustainability Program. This is a research and development program sponsored by the U.S. Department of Energy (DOE), performed in close collaboration with the nuclear utility industry, to provide the technical foundations for licensing and managing the long-term, safe and economical operation of current nuclear power plants. DOE's program focus is on longer-term and higher-risk/reward research that contributes to the national policy objectives of energy security and environmental security . The Advanced II&C research pathway is being conducted by the Idaho National Laboratory (INL). The Future Vision is based on a digital architecture that encompasses all aspects of plant operations and support, integrating plant systems, plant work processes, and plant workers in a

Control and adaptation in telecommunication systems mathematical foundations

CERN Document Server

Popovskij, Vladimir; Titarenko, Larysa

2011-01-01

This book is devoted to mathematical foundations providing synthesis and analysis of control and adaptation algorithms targeting modern telecommunication systems (TCS). The most popular technologies and network management methods are discussed.

RodPilotR - The Innovative and Cost-Effective Digital Control Rod Drive Control System for PWRs

International Nuclear Information System (INIS)

Baron, Clemens

2008-01-01

With RodPilot, AREVA NP offers an innovative and cost-effective system for controlling control rods in Pressurized Water Reactors. RodPilot controls the three operating coils of the control rod drive mechanism (lift, moveable gripper and stationary gripper coil). The rods are inserted into or withdrawn from the core as required by the Reactor Control System. The system combines modern components, state-of-the-art logic and a proven electronic control rod drive control principle to provide enhanced reliability and lower maintenance costs. (author)

Present status of the JT-60 control system

International Nuclear Information System (INIS)

Kimura, T.

1992-01-01

The present status of the control system for a large fusion device of the JT-60 upgrade tokamak is reported including its original design concept, the progress of the system in the past five-year operation and modification for the upgrade. The control system has the features of hierarchical structure, computer control, adoption of CAMAC interfaces and protective interlock by both software and hard-wired systems. Plant monitoring and control are performed by an efficient data communication via CAMAC highways. Sequential discharge control of is executed by a combination of computers and a timing system. A plasma feedback control system with fast 32-bit microprocessors and a man/machine interface with modern workstations have been newly developed for the operation of the JT-60 upgrade. (author)

Synergy between indigenous knowledge systems, modern health ...

African Journals Online (AJOL)

... the people of this country should harness a synergy between indigenous health care systems, scientific research and modern health care methods. This article attempts to address the historical evolution of health care methods in South Africa, its effect on the community as well as challenges facing the health professions.

Optimization and Control of Bilinear Systems Theory, Algorithms, and Applications

CERN Document Server

Pardalos, Panos M

2008-01-01

Covers developments in bilinear systems theory Focuses on the control of open physical processes functioning in a non-equilibrium mode Emphasis is on three primary disciplines: modern differential geometry, control of dynamical systems, and optimization theory Includes applications to the fields of quantum and molecular computing, control of physical processes, biophysics, superconducting magnetism, and physical information science

System of Thermal Balance Maintenance in Modern Test Benches for Centrifugal Pumps

Directory of Open Access Journals (Sweden)

A. I. Petrov

2015-01-01

Full Text Available The article “Systems of the heat balance maintenance in modern test benches for centrifugal pumps” makes the case to include cooling systems of a working fluid (heat setting in test bench for impeller pumps. It briefly summarizes an experience of bench building to test centrifugal pumps, developed at the BMSTU Department E-10 over the last 10 years. The article gives the formulas and the algorithm to calculate the heat capacity of different types of impeller pumps when tested at the bench as ell as to determine the heating time of the liquid in the bench without external cooling. Based on analysis of the power balance of a centrifugal pump, it is shown that about 90% of the pump unit-consumed electric power in terminals is used for heating up the working fluid in the loop of the test bench. The article gives examples of elementary heat calculation of the pump operation within the test bench. It presents the main types of systems to maintain thermal balance, their advantages, disadvantages and possible applications. The cooling system schemes for open and closed version of the benches both with built-in and with an independent cooling circuit are analysed. The paper separately considers options of such systems for large benches using the cooling tower as a cooling device in the loop, and to test the pumps using the hydraulic fluids other than water, including those at high temperatures of working fluids; in the latter case a diagram of dual-circuit cooling system "liquid-liquid-air" is shown. The paper depicts a necessity to use ethylene glycol coolant in the two-loop cooling bench. It provides an example of combining the functions of cooling and filtration in a single cooling circuit. Criteria for effectiveness of these systems are stated. Possible ways for developing systems to maintain a thermal balance, modern methods of regulation and control are described. In particular, the paper shows the efficiency of frequency control of the

Modernization of the plant computer C. N. Cofrentes

International Nuclear Information System (INIS)

Sanchez, M.; Zuriaga, J. V.

2011-01-01

Cofrentes NPP C and I systems modernization plan identifies a number of systems which upgrade is a priority mainly because of obsolescence criteria and the need for technological improvement. In 2009, the Turbine and Bypass Control Systems modernization project concluded successfully, paving the way for updating the big brother of Cofrentes NPP, the Plant Process Computer, which is connected to all process systems to collect data, store, analyze and present them to the end user in any plant operational mode. (Author)

Distributed control system for CANDU 9 nuclear power plant

International Nuclear Information System (INIS)

Harber, J.E.; Kattan, M.K.; Macbeth, M.J.

1996-01-01

Canadian designed CANDU pressurized heavy water nuclear reactors have been world leaders in electrical power generation. The CANDU 9 project is AECL's next reactor design. The CANDU 9 plant monitoring, annunciation, and control functions are implemented in two evolutionary systems; the distributed control system (DCS) and the plant display system (PDS). The CDS implements most of the plant control functions in a single hardware platform. The DCS communicates with the PDS to provide the main operator interface and annunciation capabilities of the previous control computer designs along with human interface enhancements required in a modern control system. (author)

Real time control engineering systems and automation

CERN Document Server

Ng, Tian Seng

2016-01-01

This book covers the two broad areas of the electronics and electrical aspects of control applications, highlighting the many different types of control systems of relevance to real-life control system design. The control techniques presented are state-of-the-art. In the electronics section, readers will find essential information on microprocessor, microcontroller, mechatronics and electronics control. The low-level assembly programming language performs basic input/output control techniques as well as controlling the stepper motor and PWM dc motor. In the electrical section, the book addresses the complete elevator PLC system design, neural network plant control, load flow analysis, and process control, as well as machine vision topics. Illustrative diagrams, circuits and programming examples and algorithms help to explain the details of the system function design. Readers will find a wealth of computer control and industrial automation practices and applications for modern industries, as well as the educat...

Evaluation of Modern Tools of Controlling at the Enterprise

Directory of Open Access Journals (Sweden)

Prokopenko Olga V.

2016-11-01

Full Text Available Theoretical and practical aspects of the use of tools for operational and strategic controlling at the enterprise are studied. There carried out a detailed analysis of modern tools of controlling with the subsequent identification of operational and strategic controlling tools that are most adapted for the application at domestic enterprises. Furthermore, the study highlights the advantages and disadvantages of the proposed tools for managers to choose the most effective ones for the implementation of operational and strategic controlling. For each enterprise managers should form its own set of controlling tools considering its individual characteristics and existing problems. Prospects for further research are practical application of the recommended tools and implementation of further analysis of the obtained results in terms of the effect from the introduction of specific controlling tools.

A computer-controlled conformal radiotherapy system I: overview

International Nuclear Information System (INIS)

Fraass, Benedick A.; McShan, Daniel L.; Kessler, Marc L.; Matrone, Gwynne M.; Lewis, James D.; Weaver, Tamar A.

1995-01-01

Purpose: Equipment developed for use with computer-controlled conformal radiotherapy (CCRT) treatment techniques, including multileaf collimators and/or computer-control systems for treatment machines, are now available. The purpose of this work is to develop a system that will allow the safe, efficient, and accurate delivery of CCRT treatments as routine clinical treatments, and permit modifications of the system so that the delivery process can be optimized. Methods and Materials: The needs and requirements for a system that can fully support modern computer-controlled treatment machines equipped with multileaf collimators and segmental or dynamic conformal therapy capabilities have been analyzed and evaluated. This analysis has been used to design and then implement a complete approach to the delivery of CCRT treatments. Results: The computer-controlled conformal radiotherapy system (CCRS) described here consists of a process for the delivery of CCRT treatments, and a complex software system that implements the treatment process. The CCRS system described here includes systems for plan transfer, treatment delivery planning, sequencing of the actual treatment delivery process, graphical simulation and verification tools, as well as an electronic chart that is an integral part of the system. The CCRS system has been implemented for use with a number of different treatment machines. The system has been used clinically for more than 2 years to perform CCRT treatments for more than 200 patients. Conclusions: A comprehensive system for the implementation and delivery of computer-controlled conformal radiation therapy (CCRT) plans has been designed and implemented for routine clinical use with multisegment, computer-controlled, multileaf-collimated conformal therapy. The CCRS system has been successfully implemented to perform these complex treatments, and is considered quite important to the clinical use of modern computer-controlled treatment techniques

ORACLS: A system for linear-quadratic-Gaussian control law design

Science.gov (United States)

Armstrong, E. S.

1978-01-01

A modern control theory design package (ORACLS) for constructing controllers and optimal filters for systems modeled by linear time-invariant differential or difference equations is described. Numerical linear-algebra procedures are used to implement the linear-quadratic-Gaussian (LQG) methodology of modern control theory. Algorithms are included for computing eigensystems of real matrices, the relative stability of a matrix, factored forms for nonnegative definite matrices, the solutions and least squares approximations to the solutions of certain linear matrix algebraic equations, the controllability properties of a linear time-invariant system, and the steady state covariance matrix of an open-loop stable system forced by white noise. Subroutines are provided for solving both the continuous and discrete optimal linear regulator problems with noise free measurements and the sampled-data optimal linear regulator problem. For measurement noise, duality theory and the optimal regulator algorithms are used to solve the continuous and discrete Kalman-Bucy filter problems. Subroutines are also included which give control laws causing the output of a system to track the output of a prescribed model.

Benchmarking Advanced Control Algorithms for a Laser Scanner System

DEFF Research Database (Denmark)

Stoustrup, Jakob; Ordys, A.W.; Smillie, I.

1996-01-01

The paper describes tests performed on the laser scanner system toassess feasibility of modern control techniques in achieving a requiredperformance in the trajectory following problem. The two methods tested areQTR H-infinity and Predictive Control. The results are ilustated ona simulation example....

The simulation study on the Nuclear Heating Reactor's power auto-control system

International Nuclear Information System (INIS)

Yang Zhijun; Liu Longzhi; Hu Guifen

2000-01-01

The power automatic control system on nuclear heating reactor (NHR) is a multi-input and multi-output non-linear system. The power automatic control system on NHR is studied by modern control theory. Through the simulation experiments, it is clear that adopting μ outer-loop and LQR inner-loop feedback, the best control results are obtained

Human Factors Engineering Aspects of Modifications in Control Room Modernization

Energy Technology Data Exchange (ETDEWEB)

Hugo, Jacques [Idaho National Lab. (INL), Idaho Falls, ID (United States); Clefton, Gordon [Idaho National Lab. (INL), Idaho Falls, ID (United States); Joe, Jeffrey [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2017-06-01

This report describes the basic aspects of control room modernization projects in the U.S. nuclear industry and the need for supplementary guidance on the integration of human factors considerations into the licensing and regulatory aspects of digital upgrades. The report pays specific attention to the integration of principles described in NUREG-0711 (Human Factors Engineering Program Review Model) and how supplementary guidance can help to raise general awareness in the industry regarding the complexities of control room modernization projects created by many interdependent regulations, standards and guidelines. The report also describes how human factors engineering principles and methods provided by various resources and international standards can help in navigating through the process of licensing digital upgrades. In particular, the integration of human factors engineering guidance and requirements into the process of licensing digital upgrades can help reduce uncertainty related to development of technical bases for digital upgrades that will avoid the introduction of new failure modes.

Nonlinear systems techniques for dynamical analysis and control

CERN Document Server

Lefeber, Erjen; Arteaga, Ines

2017-01-01

This treatment of modern topics related to the control of nonlinear systems is a collection of contributions celebrating the work of Professor Henk Nijmeijer and honoring his 60th birthday. It addresses several topics that have been the core of Professor Nijmeijer’s work, namely: the control of nonlinear systems, geometric control theory, synchronization, coordinated control, convergent systems and the control of underactuated systems. The book presents recent advances in these areas, contributed by leading international researchers in systems and control. In addition to the theoretical questions treated in the text, particular attention is paid to a number of applications including (mobile) robotics, marine vehicles, neural dynamics and mechanical systems generally. This volume provides a broad picture of the analysis and control of nonlinear systems for scientists and engineers with an interest in the interdisciplinary field of systems and control theory. The reader will benefit from the expert participan...

Modernization of WWER-1000 radiation monitoring systems

Energy Technology Data Exchange (ETDEWEB)

Smith, T [General Atomics, San Diego, CA (United States)

1996-12-31

A modernization scheme of the radiation monitoring system for WWER-1000 is proposed. It has a purpose to comply with international standards and to reduce operational and maintenance cost by deleting obsolete components and reducing the number of detector channels. Detailed layouts of I/C system architecture, digital radiation monitoring system (DRAMS) architecture and LRP block diagram are presented. If planned and implemented properly, this program can provide cost savings by reducing time required to access and display data and maintenance cost by deleting obsolete parts and decreasing the number of detector channels. 3 figs.

Modernization of WWER-1000 radiation monitoring systems

International Nuclear Information System (INIS)

Smith, T.

1995-01-01

A modernization scheme of the radiation monitoring system for WWER-1000 is proposed. It has a purpose to comply with international standards and to reduce operational and maintenance cost by deleting obsolete components and reducing the number of detector channels. Detailed layouts of I/C system architecture, digital radiation monitoring system (DRAMS) architecture and LRP block diagram are presented. If planned and implemented properly, this program can provide cost savings by reducing time required to access and display data and maintenance cost by deleting obsolete parts and decreasing the number of detector channels. 3 figs

RodPilot{sup R} - The Innovative and Cost-Effective Digital Control Rod Drive Control System for PWRs

Energy Technology Data Exchange (ETDEWEB)

Baron, Clemens [AREVA NP GmbH, NLEE-G, Postfach 1199, 91001 Erlangen (Germany)

2008-07-01

With RodPilot, AREVA NP offers an innovative and cost-effective system for controlling control rods in Pressurized Water Reactors. RodPilot controls the three operating coils of the control rod drive mechanism (lift, moveable gripper and stationary gripper coil). The rods are inserted into or withdrawn from the core as required by the Reactor Control System. The system combines modern components, state-of-the-art logic and a proven electronic control rod drive control principle to provide enhanced reliability and lower maintenance costs. (author)

A methodological approach to designing sewer system control

DEFF Research Database (Denmark)

Mollerup, Ane Loft

for this thesis was therefore the wish for a methodological approach to sewer system control design. Using a case study the following research hypothesis was tested in this thesis: Using classical and modern control theory, a methodological approach can be derived for designing sewer system control. This can aid....... This was not unexpected, since the true potential of having optimisation arises, when a system has many control loops with limit-ing constraints and/or changing prioritisation between them. The results showed that for small sewer systems, where the complexity is limited, it is not necessarily the best option to implement...... generate control systems of the future that are more robust, more structured, have a better performance and are easi-er to maintain....

Factors influencing the profitability of optimizing control systems

International Nuclear Information System (INIS)

Broussaud, A.; Guyot, O.

1999-01-01

Optimizing control systems supplement conventional Distributed Control Systems and Programmable Logic Controllers. They continuously implement set points, which aim at maximizing the profitability of plant operation. They are becoming an integral part of modern mineral processing plants. This trend is justified by economic considerations, optimizing control being among the most cost-effective methods of improving metallurgical plant performance. The paper successively analyzes three sets of factors, which influence the profitability of optimizing control systems, and provides guidelines for analyzing the potential value of an optimizing control system at a given operation: external factors, such as economic factors and factors related to plant feed; features of the optimizing control system; and subsequent maintenance of the optimizing control system. It is shown that pay back times for optimization control projects are typically measured in days. The OCS software used by the authors for their applications is described briefly. (author)

Traditional leadership factor in modern local government system in ...

African Journals Online (AJOL)

Traditional leadership factor in modern local government system in Ghana: policy Implementation, role conflict and marginalization. ... at promoting education, health and environmental management, are highly commendable in Ghana.

The shaping of modern human immune systems by multiregional admixture with archaic humans.

Science.gov (United States)

Abi-Rached, Laurent; Jobin, Matthew J; Kulkarni, Subhash; McWhinnie, Alasdair; Dalva, Klara; Gragert, Loren; Babrzadeh, Farbod; Gharizadeh, Baback; Luo, Ma; Plummer, Francis A; Kimani, Joshua; Carrington, Mary; Middleton, Derek; Rajalingam, Raja; Beksac, Meral; Marsh, Steven G E; Maiers, Martin; Guethlein, Lisbeth A; Tavoularis, Sofia; Little, Ann-Margaret; Green, Richard E; Norman, Paul J; Parham, Peter

2011-10-07

Whole genome comparisons identified introgression from archaic to modern humans. Our analysis of highly polymorphic human leukocyte antigen (HLA) class I, vital immune system components subject to strong balancing selection, shows how modern humans acquired the HLA-B*73 allele in west Asia through admixture with archaic humans called Denisovans, a likely sister group to the Neandertals. Virtual genotyping of Denisovan and Neandertal genomes identified archaic HLA haplotypes carrying functionally distinctive alleles that have introgressed into modern Eurasian and Oceanian populations. These alleles, of which several encode unique or strong ligands for natural killer cell receptors, now represent more than half the HLA alleles of modern Eurasians and also appear to have been later introduced into Africans. Thus, adaptive introgression of archaic alleles has significantly shaped modern human immune systems.

Seed drill depth control system for precision seeding

DEFF Research Database (Denmark)

Kirkegaard Nielsen, Søren; Munkholm, Lars Juhl; Lamandé, Mathieu

2018-01-01

acting on the drill coulters, which generates unwanted vibrations and, consequently, a non-uniform seed placement. Therefore, a proof-of-concept dynamic coulter depth control system for a low-cost seed drill was developed and studied in a field experiment. The performance of the active control system...... depth control system this variability was reduced to±2 mm. The system with the active control system operated more accurately at an operational speed of 12 km h−1 than at 4 km h−1 without the activated control system.......An adequate and uniform seeding depth is crucial for the homogeneous development of a crop, as it affects time of emergence and germination rate. The considerable depth variations observed during seeding operations - even for modern seed drills - are mainly caused by variability in soil resistance...

Religious legal systems: challenges of the modernity

Directory of Open Access Journals (Sweden)

Д. В. Лук’янов

2015-11-01

Full Text Available The influence of world globalization processes on the development of the religious legal systems has been analyzed in the paper. Globalization processes in the XXI century are regarding individuals, nations, and civilizations. Global transformations lead to qualitative changes in the socio-cultural relations and actualize a wide range of issues which are related to the formation of a new world culture. Modern globalization takes diverse range of public relations in its own orbit. The relationship between the legal systems in the twentieth century is some of the most important aspects of this process. However, the interaction of legal systems has significant differences from the interaction of economies of different countries. There are actual economic relations domination of Western financial and economic institutions and standardization of relevant rules. But the attempts to apply this approach to law lead to resistance to Western standards and the spread of major civilizational conflicts in different parts of the world. Globalization should be based on respect for cultural, religious and legal diversity. It has to ensure preservation of forced “Westernisation”. Significant differences in the impact of globalization on the convergence of legal systems of Western law (Romano-Germanic and Anglo-American and their impact on religious legal systems of Muslim, Hindu and Jewish law must be emphasized. The religious legal systems are not exposed to other systems and the related changes. This is due to such features as the divine nature, increased stability, specific sources of law etc. An important issue that requires further study is the reverse influence which religious law exercises to secularized modern legal system.

Stability and Control of Large-Scale Dynamical Systems A Vector Dissipative Systems Approach

CERN Document Server

Haddad, Wassim M

2011-01-01

Modern complex large-scale dynamical systems exist in virtually every aspect of science and engineering, and are associated with a wide variety of physical, technological, environmental, and social phenomena, including aerospace, power, communications, and network systems, to name just a few. This book develops a general stability analysis and control design framework for nonlinear large-scale interconnected dynamical systems, and presents the most complete treatment on vector Lyapunov function methods, vector dissipativity theory, and decentralized control architectures. Large-scale dynami

[European health systems and the integration problem of modern societies].

Science.gov (United States)

Lüschen, G

2000-04-01

With reference to the national health systems in Germany and the UK we must acknowledge that it was in particular Bismarck's Reform, originally directed toward a solidarity among the socially weak, which entailed in its development a marked redistribution via progressive health fees and standardized health services. In view of Alfred Marshall's original expectations this has resulted in a specific integration of the socially weak and with some difference for nationally tax-financed and social security financed health systems to a genuine contribution towards integration of modern society. An open research question is whether as a consequence of solidarity and integration through health systems there is a decline of social inequality for health. Equally open is the question as to the socio-structural and economic consequences the expansion of modern health systems has.

Modern tools to evaluate and optimize fire protection systems

International Nuclear Information System (INIS)

Alvares, N.J.; Hasegawa, H.K.

1980-01-01

Modern techniques, such as fault tree analysis, can be used to obtain engineering descriptions of specific fire protection systems. The analysis allows establishment of an optimum level of fire protection, and evaluates the level of protection provided by various systems. A prime example: the application to fusion energy experiments

Advances in dynamical systems and control

CERN Document Server

Zgurovsky, Mikhail

2016-01-01

Focused on recent advances, this book covers theoretical foundations as well as various applications. It presents modern mathematical modeling approaches to the qualitative and numerical analysis of solutions for complex engineering problems in physics, mechanics, biochemistry, geophysics, biology and climatology. Contributions by an international team of respected authors bridge the gap between abstract mathematical approaches, such as applied methods of modern analysis, algebra, fundamental and computational mechanics, nonautonomous and stochastic dynamical systems on the one hand, and practical applications in nonlinear mechanics, optimization, decision making theory and control theory on the other. As such, the book will be of interest to mathematicians and engineers working at the interface of these fields. .

Long-Term Instrumentation, Information, and Control Systems (II and C) Modernization Future Vision and Strategy

International Nuclear Information System (INIS)

Thomas, Kenneth

2012-01-01

Life extension beyond 60 years for the U.S operating nuclear fleet requires that instrumentation and control (I and C) systems be upgraded to address aging and reliability concerns. It is impractical for the legacy systems based on 1970's vintage technology operate over this extended time period. Indeed, utilities have successfully engaged in such replacements when dictated by these operational concerns. However, the replacements have been approached in a like-for-like manner, meaning that they do not take advantage of the inherent capabilities of digital technology to improve business functions. And so, the improvement in I and C system performance has not translated to bottom-line performance improvement for the fleet. Therefore, wide-scale modernization of the legacy I and C systems could prove to be cost-prohibitive unless the technology is implemented in a manner to enable significant business innovation as a means of off-setting the cost of upgrades. A Future Vision of a transformed nuclear plant operating model based on an integrated digital environment has been developed as part of the Advanced Instrumentation, Information, and Control (II and C) research pathway, under the Light Water Reactor (LWR) Sustainability Program. This is a research and development program sponsored by the U.S. Department of Energy (DOE), performed in close collaboration with the nuclear utility industry, to provide the technical foundations for licensing and managing the long-term, safe and economical operation of current nuclear power plants. DOE's program focus is on longer-term and higher-risk/reward research that contributes to the national policy objectives of energy security and environmental security . The Advanced II and C research pathway is being conducted by the Idaho National Laboratory (INL). The Future Vision is based on a digital architecture that encompasses all aspects of plant operations and support, integrating plant systems, plant work processes, and plant

Adaptive Control System of Hydraulic Pressure Based on The Mathematical Modeling

Science.gov (United States)

Pilipenko, A. V.; Pilipenko, A. P.; Kanatnikov, N. V.

2016-04-01

In this paper, the authors highlight the problem of replacing an old heavy industrial equipment, and offer the replacement of obsolete control systems on the modern adaptive control system, which takes into account changes in the hydraulic system of the press and compensates them with a corrective action. The proposed system can reduce a water hammer and thereby increase the durability of the hydraulic system and tools.

Logistics Systems Engineer – Interdisciplinary Competence Model for Modern Education

OpenAIRE

Tarvo Niine; Ott Koppel

2015-01-01

Logistics is an interdisciplinary field of study. Modern logisticians need to integrate business management and administration skills with technology design, IT systems and other engineering fields. However, based on research of university curricula and competence standards in logistics, the engineering aspect is not represented to full potential. There are some treatments of logistician competences which relate to engineering, but not a modernized one with wide-spread recognition. This paper...

[Research of regional medical consumables reagent logistics system in the modern hospital].

Science.gov (United States)

Wu, Jingjiong; Zhang, Yanwen; Luo, Xiaochen; Zhang, Qing; Zhu, Jianxin

2013-09-01

To explore the modern hospital and regional medical consumable reagents logistics system management. The characteristics of regional logistics, through cooperation between medical institutions within the region, and organize a wide range of special logistics activities, to make reasonable of the regional medical consumable reagents logistics. To set the regional management system, dynamic management systems, supply chain information management system, after-sales service system and assessment system. By the research of existing medical market and medical resources, to establish the regional medical supplies reagents directory and the initial data. The emphasis is centralized dispatch of medical supplies reagents, to introduce qualified logistics company for dispatching, to improve the modern hospital management efficiency, to costs down. Regional medical center and regional community health service centers constitute a regional logistics network, the introduction of medical consumable reagents logistics services, fully embodies integrity level, relevance, purpose, environmental adaptability of characteristics by the medical consumable reagents regional logistics distribution. Modern logistics distribution systems can increase the area of medical consumables reagent management efficiency and reduce costs.

Forsmark NPP I and C modernization strategy

International Nuclear Information System (INIS)

Hallen, J.; Rydahl, I.; Kloow, L.

2003-01-01

By the year 2000, the Forsmark NPP was halfway through the planned plant life. As early as 1995, Forsmark realized that the old analog I and C equipment would need to be replaced before 2005. At the Forsmark NPP they had strength of a vision of an integrated modernization and a strategy to reach the vision. Without vision and strategy, the plant could end up with a fragmented plant I and C-architecture that is not cost-effective or operable. This paper will address several questions that led to the current modernization program in Forsmark, the more important questions are: What would happen if the modernization would be postponed? Which main requirements were to be achieved by means of the modernization strategy? The goal of a completed plant modernization program is a totally integrated system solution and what factors were considered during the modernization? How to gain acceptance from the operational staff in designing Control Room and Soft Control Displays? What are the important roles for the staff and organization to reach the end goal? What has been the experience to date and what are the lessons learned? Thanks to the long term co-operation between Forsmark and Westinghouse the modernization has been very successful for both parties. (orig.)

Modernization of Safety and Control Instrumentation of the IEA-R1 Research Reactor

Energy Technology Data Exchange (ETDEWEB)

De Carvalho, P.V., E-mail: paulov@ien.gov.br [Institute of Nuclear Engineering (IEN), National Nuclear Energy Commission (CNEN), Rio de Janeiro (Brazil)

2014-08-15

The research reactor IEA-R1 located in the Institute of Energy and Nuclear Research (IPEN), São Paulo, Brazil, obtained its first criticality on 16 September 1957 and since then has served the scientific and medical community in the performance of experiments in applied nuclear physics, as well as the provision of radioisotopes for production of radiopharmaceuticals. The reactor produces radioisotopes {sup 82}Br and {sup 41}Ar for special processes in industrial inspection and {sup 192}Ir and {sup 198}Au as sources of radiation used in brachytherapy, {sup 153}Sm for pain relief in patients with bone metastasis, and calibrated sources of {sup 133}Ba, {sup 137}Cs, {sup 57}Co, {sup 60}Co, {sup 241}Am and {sup 152}Eu used in medical clinics and hospitals practicing nuclear medicine and research laboratories. Services are offered in regular non-destructive testing by neutron radiography, neutron irradiation of silicon for phosphorous doping and other various irradiations with neutrons. The reactor is responsible for producing approximately 70% of radiopharmaceutical {sup 131}I used in Brazil, which saves about US$ 800 000 annually for the country. After more than 50 years of use, most of its equipment and systems have been modernized, and recently the reactor power was increased to 5 MW in order to enhance radioisotope production capability. However, the control room and nuclear instrumentation system used for reactor safety have operated more than 30 years and require constant maintenance. Many equipment and electronic components are obsolete, and replacements are not available in the market. The modernization of the nuclear safety and control instrumentation systems of IEA-R1 is being carried out with consideration for the internationally recognized criteria for safety and reliable reactor operations and the latest developments in nuclear electronic technology. The project for the new reactor instrumentation system specifies three wide range neutron monitoring

National Strategy for Modernizing the Regulatory System for Biotechnology Products

Science.gov (United States)

This National Strategy for Modernizing the Regulatory System for Biotechnology Products sets forth a vision for ensuring that the federal regulatory system is prepared to efficiently assess the risks, if any, of the future products of biotechnology.

Instrumentation and control systems for CANDU-PHW nuclear power plants

International Nuclear Information System (INIS)

Lepp, R.M.; Watkins, L.M.

1982-02-01

The instrumentation and control of CANDU nuclear power plants takes advantage of modern electronics technology in the extensive computerization of important control and man-machine functions. A description of these functions as well as those of the four Special Safety Systems is provided

The Modern Elements of the Management System of the Agrarian Business Enterprises

Directory of Open Access Journals (Sweden)

Fostolovych Valentyna A.

2017-05-01

Full Text Available The article provides an operation mechanism for the integrated management system that is recommended for the introduction at the enterprises of the agrarian business by means of principles, methods and tools of management system. An example of the modern element of the management system of the agricultural enterprises is the software product Soft.Farm. The article considers improving of the organizational structure of enterprises in the direction of formation of clusters of different forms and active implementing of an integrated management system with wide application of its principles (Deming principles, principle of continuous improvement of processes, zero defects principle, principle of collaboration, methods (teamwork method, quality function deployment (QFD, value analysis, failure modes and effects analysis (FMEA, SKO, SPC and structural elements (flowchart, Ishikawa diagram, Pareto chart, column chart, checklists, and control maps.

The Modern Monetary System and Gold

Directory of Open Access Journals (Sweden)

N N Rubtsov

2013-12-01

Full Text Available The article considers the nature of modern money, analyzes the mechanism of its creation, showing that it is basically generated by credit and the principle of partial bank reserve. The article draws comparative parallels between trade money based on gold and contemporary, credit money; the author quotes leading bankers and finance experts on the need for partial return to the principles of functioning of the gold standard as the most effective institute of regulating the monetary system in society.

Replacement of the complete control system of the NPP Oskarshamn 1 by digital distributed control system

International Nuclear Information System (INIS)

Berger, E.

1998-01-01

As part of an ongoing modernization program, Oskarshamn 1's I and C system and control room will be upgraded by ABB using its Advant Power range of digital, programmable process control system. Besides ensuring the higher level of safety that is demanded today, the new equipment provides the plant with an integrated system which will improve operator overview of operation and reduce risk of human error and serve as a platform for further improvements of the control room. This paper discusses in the example of Oskarshamn 1 how the complete control system of a nuclear power plant may be exchanged, the technical solution and the time schedule. Oskarshamn 1 is the first nuclear power plant in Sweden. It is a boiling water reactor built by ABB ATOM in Sweden between 1966 and 1971. According to this age the control system is semiconductor based and the reactor protection system is relays based. This makes the maintenance expensive and extensions nearly impossible. To extend the life period of this plant the owner has decided to improve the safety system and to replace the reactor protection system and safety related control and the non safety related control by a state of the art digital distributed control system of ABB. In March 1997 ABB got the order to replace the reactor protection system, the safety control system, to start the replacement of all control systems and to replace the old control room by a new ergonomically designed control room. Together with the exchange of the control system an enhancement of the safety system and of the emergency power supply will be implemented

Interfacing industrial process control systems to LEP/LHC

International Nuclear Information System (INIS)

Rabany, M.

1992-01-01

Modern industrial process control systems have developed to meet the needs of industry to increase the production while decreasing the costs. Although particle accelerators designers have pioneered in control systems during the seventies, it has now become possible to them to profit of industrial solutions in substitution of, or in complement with the more traditional home made ones. Adapting and integrating such industrial systems to the accelerator control area will certainly benefit to the field in terms of finance, human resources and technical facilities offered off-the-shelf by the widely experienced industrial controls community; however this cannot be done without slightly affecting the overall accelerator control architecture. The paper briefly describes the industrial controls arena and takes example on an industrial process control system recently installed at CERN to discuss in detail the related choices and issues. (author)

A modern trans-ionospheric propagation sensing system

Science.gov (United States)

Bishop, G. J.; Klobuchar, J. A.; Ronn, A. E.; Bedard, M. G.

1989-09-01

One of the most important potential problems with modern military systems which utilize spacecraft is the effect of the ionosphere on the radio signals which pass to and from the spacecraft. Such systems include active communications and navigation satellites as well as both ground-based and potential space-based ranging systems. The major effects the ionosphere can have on such systems are the additional time delay the electrons in the earth's ionosphere add to the free space path delay, the short term rate of change of this additional delay, amplitude scintillation or fading effects the signal encounters due to irregularities in the ionosphere, and Faraday rotation of linearly polarized radio waves transmitted through the ionosphere. While some of these effects were studied adequate models of these effects on military systems still do not exist. A modern trans-ionospheric sensing system, called TISS, is being procured which will consist of a number of stations located throughout the world, making real time measurements of the time delay of the ionosphere, and its rate of change, as well as amplitude scintillation, along several different viewing directions from each station. These trans-ionospheric measurements will be used to allow models, which currently provide only monthly propagation parameters. The real-time specifications of these parameters can then be used as decision aids in both the tactical and the strategic military environments. The TISS will include first order artificial intelligence design to aid in gathering the most appropriate sets of available real-time trans-ionospheric propagation data, and will communicate these data sets to the Air Weather Service Forecasting Center where they will be tailored to specific military customers.

Novel electro-hydraulic position control system for primary mirror supporting system

Directory of Open Access Journals (Sweden)

Xiongbin Peng

2016-05-01

Full Text Available In the field of modern large-scale telescope, primary mirror supporting system technology faces the difficulties of theoretically uniform output force request and bias compensation. Therefore, a novel position control system combining hydraulic system with servo motor system is introduced. The novel system ensures uniform output force on supporting points without complicating the mechanical structure. The structures of both primary mirror supporting system and novel position system are described. Then, the mathematical model of novel position control system is derived for controller selection. A proportional–derivative controller is adopted for simulations and experiments of step response and triangle path tracking. The results show that proportional–derivative controller guarantees the system with micrometer-level positioning ability. A modified proportional–derivative controller is utilized to promote system behavior with faster response overshoot. The novel position control system is then applied on primary mirror supporting system. Coupling effect is observed among actuator partitions, and relocation of virtual pivot supporting point is chosen as the decoupling measurement. The position keeping ability of the primary mirror supporting system is verified by rotating the mirror cell at a considerably high rate. The experiment results show that the decoupled system performs better with smaller bias and shorter recovery time.

A HUMAN FACTORS META MODEL FOR U.S. NUCLEAR POWER PLANT CONTROL ROOM MODERNIZATION

Energy Technology Data Exchange (ETDEWEB)

Joe, Jeffrey C.

2017-03-01

Over the last several years, the United States (U.S.) Department of Energy (DOE) has sponsored human factors research and development (R&D) and human factors engineering (HFE) activities through its Light Water Reactor Sustainability (LWRS) program to modernize the main control rooms (MCR) of commercial nuclear power plants (NPP). Idaho National Laboratory (INL), in partnership with numerous commercial nuclear utilities, has conducted some of this R&D to enable the life extension of NPPs (i.e., provide the technical basis for the long-term reliability, productivity, safety, and security of U.S. NPPs). From these activities performed to date, a human factors meta model for U.S. NPP control room modernization can now be formulated. This paper discusses this emergent HFE meta model for NPP control room modernization, with the goal of providing an integrated high level roadmap and guidance on how to perform human factors R&D and HFE for those in the U.S. nuclear industry that are engaging in the process of upgrading their MCRs.

Ecologically sound management: aspects of modern sustainable deer farming systems.

Science.gov (United States)

Pearse, A J; Drew, K R

1998-01-01

Modern deer farming systems have become increasingly intensive allowing strategic feeding for production and genetic improvement programmes. Meeting feeding standards that account for changing nutritional demands related to seasonality and reproductive state is critical. As the industry matures there is a growing awareness of the balance between retaining natural behaviour in producing breeding stock on larger extensive holdings and intensification systems for performance in young stock. Stocking rates are critical determinants of success as land use and capability needs are matched with an increasing stratification of stock type and purpose. Food product safety and welfare considerations of farmed deer are being driven by consumer demands. Farm quality assurance and codes of practice are developing to ensure that deer farming meets and exceeds international expectations of land use and deer welfare in modern deer farming systems.

The advanced light source control system

International Nuclear Information System (INIS)

Magyary, S.; Chin, M.; Cork, C.; Fahmie, M.; Lancaster, H.; Molinari, P.; Ritchie, A.; Robb, A.; Timossi, C.; Young, J.

1990-01-01

The criteria for the design of a modern control system are discussed in the context of the special requirements for the control of the Advanced Light Source (ALS). This is followed by the description of the system being built, which has a number of special features. The emphasis has been placed on providing an extremely wide I/O and CPU bandwidth (greater than 120 Mbits/s and 1200 Mips, respectively) and on using commercially available hardware and software. The only major custom design item is the Intelligent Local Controller (ILC), of which about 600 will be used to interface to the hardware. The use of personal computers for the operator stations allows the use of a wealth of industrial standards for windows, languages and tools. (orig.)

Control system at the Synchrotron Radiation Research Center

International Nuclear Information System (INIS)

Jan, G.J.

1991-01-01

A modern control system was designed for SRRC to control and monitor the facilities of storage ring, beam transport line and injection system. The SRRC control system is a distributed system which is divided into two logical levels. Several process computers and workstations at upper level provide the computing power for physics simulation, data storage and graphical user interfaces. VME-based Intelligent Local Controllers (ILC) are the backbone of the lower level system which handle the real time devices access and the closed loop control. Ethernet network provides the interconnection between these two layers using IEEE 802.3 and TCP/IP protocol. The software in upper level computers includes data base server, network server, simulation programs, various application codes and X windows based graphical user interfaces. Device drivers, application programs for devices control and communication programs are the major software components at the ILC level

Research on ARM Numerical Control System

Science.gov (United States)

Wei, Xu; JiHong, Chen

Computerized Numerical Control (CNC) machine tools is the foundation of modern manufacturing systems, whose advanced digital technology is the key to solve the problem of sustainable development of machine tool manufacturing industry. The paper is to design CNC system embedded on ARM and indicates the hardware design and the software systems supported. On the hardware side: the driving chip of the motor control unit, as the core of components, is MCX314AL of DSP motion control which is developed by NOVA Electronics Co., Ltd. of Japan. It make convenient to control machine because of its excellent performance, simple interface, easy programming. On the Software side, the uC/OS-2 is selected as the embedded operating system of the open source, which makes a detailed breakdown of the modules of the CNC system. Those priorities are designed according to their actual requirements. The ways of communication between the module and the interrupt response are so different that it guarantees real-time property and reliability of the numerical control system. Therefore, it not only meets the requirements of the current social precision machining, but has good man-machine interface and network support to facilitate a variety of craftsmen use.

Programmable Logic Controllers for Systems of Automatic of the Level Crossing

Directory of Open Access Journals (Sweden)

Mieczyslaw Kornaszewski

2006-01-01

Full Text Available The railway crossings are vulnerable to incidence of high number of accidents often deadly. In order to face this problem, the modern systems of automatic of the level crossing have been introduced. These systems are based on Programmable Logic Controllers, which allow the designers to exploit self-control mechanisms, events acquiring, technical diagnostic which in turn enable remote control and acquisition of faults.

Demands on project management of comprehensive modernization projects in the electrical systems area. Example of modernization of electrical systems of Kozloduy NPP Unit 5 and 6

International Nuclear Information System (INIS)

Stinshoff, Helmut; Weber, Patrick

2006-01-01

In nuclear power plants, station supply with electric energy must be guaranteed any time. This applies in particular also during the implementation of complex electrical systems modernization projects. Highest demands on the project management, extensive experience and system knowledge are required. In the frame of the Modernization Program for the nuclear power plant Kozloduy unit 5 and 6 in Bulgaria Framatome ANP has approved its ability to implement a large scope of modernization measures during the refueling outages of the years 2003 to 2005. The Contract of the Modernization Program for the European Consortium Kozloduy (Framatome ANP, Atomenergoexport) was signed in July 1999 and became effective in June 2001. The project will be finished by May 2006, with the approval of the Updated Final Safety Analysis Report. The scope of hardware work has been implemented within 6 plant outages during the years 2002 to 2005. The focus of the Modernization Program is mainly oriented to nuclear safety aspects, with the aim of upgrading of the Units to a high safety level in compliance with international practice. A further section of the project is dedicated to upgrading of operational equipment. Framatome ANP personnel have shown that besides the technical challenges which had to be faced, also the intercultural and language barriers were successfully overcome. The good teamwork between the partners of the Consortium ECK, its Bulgarian subcontractors and with Kozloduy plant personnel has been an important success factor. (authors)

Piloted Evaluation of Modernized Limited Authority Control Laws in the NASA-Ames Vertical Motion Simulator (VMS)

Science.gov (United States)

Sahasrabudhe, Vineet; Melkers, Edgar; Faynberg, Alexander; Blanken, Chris L.

2003-01-01

The UH-60 BLACK HAWK was designed in the 1970s, when the US Army primarily operated during the day in good visual conditions. Subsequently, the introduction of night-vision goggles increased the BLACK HAWK'S mission effectiveness, but the accident rate also increased. The increased accident rate is strongly tied to increased pilot workload as a result of a degradation in visual cues. Over twenty years of research in helicopter flight control and handling qualities has shown that these degraded handling qualities can be recovered by modifying the response type of the helicopter in low speed flight. Sikorsky Aircraft Corporation initiated a project under the National Rotorcraft Technology Center (NRTC) to develop modern flight control laws while utilizing the existing partial authority Stability Augmentation System (SAS) of the BLACK HAWK. This effort resulted in a set of Modernized Control Laws (MCLAWS) that incorporate rate command and attitude command response types. Sikorsky and the US Army Aeroflightdynamics Directorate (AFDD) conducted a piloted simulation on the NASA-Ames Vertical h4otion Simulator, to assess potential handling qualities and to reduce the risk of subsequent implementation and flight test of these modern control laws on AFDD's EH-60L helicopter. The simulation showed that Attitude Command Attitude Hold control laws in pitch and roll improve handling qualities in the low speed flight regime. These improvements are consistent across a range of mission task elements and for both good and degraded visual environments. The MCLAWS perform better than the baseline UH-60A control laws in the presence of wind and turbulence. Finally, while the improved handling qualities in the pitch and roll axis allow the pilot to pay more attention to the vertical axis and hence altitude performance also improves, it is clear from pilot comments and altitude excursions that the addition of an Altitude Hold function would further reduce workload and improve overall

The Extent of the Application of the Commercial Banks in Aqaba for Modern Methods of Accounting Information Systems

OpenAIRE

Muhannad Akram Meqbel Ahmad; Ashraf Mohammad Salem Alrjoub

2014-01-01

This study tests the head of departments’ perception towards the relationship between applying accounting information systems and production activities. The results show a positive significant relationship between AIS and production activities (i.e. production design, production planning and control, production operation and cost accounting).This study recommends that using modern methods to develop the skills of the interaction between the users of accounting information systems and between ...

Notes on safety modernization of nuclear power plants in Sweden

International Nuclear Information System (INIS)

Hammar, L.

1997-01-01

Investment programmes are pursued for all reactor generations in the order of 70M USD per year and unit, despite the political decision to phase out nuclear power. 15-20% of this may be safety-related. Major redesign and replacements of piping and joints in the primary system of Ringhals-1 (1:st generation BWR, external pump loops) are under-way aimed at enhancing the barrier reliability at par with with the new reactors with internal circulation pumps. Major upgrading in process control are typically on the agenda, e.g. modern digital protection and control systems as installed in Ringhals 1 and 2 in 1995. Comprehensive modernization of the control rooms are planned for all Swedish reactors, commencing in 1997 with the Forsmark reactors. The needs for modernization in regard of safety are expected to be further clarified in the design basis reviews due for completion in 1998

Replacement of the complete control system of the NPP Oskarshamn 1 by digital distributed control system

International Nuclear Information System (INIS)

Berger, E.

1998-01-01

As part of an ongoing modernization program, the I and C system and the control room of Oskarshamn 1 will be upgraded by ABB using its 'Advant Power' range of digital, programmable process control system. Besides ensuring the higher level of safety that is demanded today, the new equipment provides the plant with an integrated system which will improve operator interaction with the plant and reduce the risk of human error. The newly installed DCS system will serve also as a platform for further improvements of the control room. This paper discusses Oskarshamn 1 exchange of the complete control system of a nuclear power plant, the technical solution and the time schedule. Oskarshamn 1 is the first nuclear power plant in Sweden. It is a boiling water reactor built between 1966 and 1971 by ABB ATOM in Sweden. According to the plant age the control system is relay-based, while instrumentation and analogue control is semiconductor-based. This makes maintenance expensive and even worse, makes extensions nearly impossible. According to the safety standards of the 1960s, there is no separation between safety and non safety control and no seismic qualification. To extend the life of this plant the owner has decided to improve the safety system as well as to replace the reactor protection system, the safety related control and the non safety related control by a state-of-the-art digital distributed control system from ABB. In March 1997, ABB got the order to replace the reactor protection system, the safety control system and to start the replacement of all control systems. The old control room has to be replaced by a new ergonomically design. Together with the exchange of the control system the safety features of the plant and the emergency power supply has to be extended. (author)

Fault-tolerant Control of a Cyber-physical System

Science.gov (United States)

Roxana, Rusu-Both; Eva-Henrietta, Dulf

2017-10-01

Cyber-physical systems represent a new emerging field in automatic control. The fault system is a key component, because modern, large scale processes must meet high standards of performance, reliability and safety. Fault propagation in large scale chemical processes can lead to loss of production, energy, raw materials and even environmental hazard. The present paper develops a multi-agent fault-tolerant control architecture using robust fractional order controllers for a (13C) cryogenic separation column cascade. The JADE (Java Agent DEvelopment Framework) platform was used to implement the multi-agent fault tolerant control system while the operational model of the process was implemented in Matlab/SIMULINK environment. MACSimJX (Multiagent Control Using Simulink with Jade Extension) toolbox was used to link the control system and the process model. In order to verify the performance and to prove the feasibility of the proposed control architecture several fault simulation scenarios were performed.

Trends in modern system theory

Science.gov (United States)

Athans, M.

1976-01-01

The topics considered are related to linear control system design, adaptive control, failure detection, control under failure, system reliability, and large-scale systems and decentralized control. It is pointed out that the design of a linear feedback control system which regulates a process about a desirable set point or steady-state condition in the presence of disturbances is a very important problem. The linearized dynamics of the process are used for design purposes. The typical linear-quadratic design involving the solution of the optimal control problem of a linear time-invariant system with respect to a quadratic performance criterion is considered along with gain reduction theorems and the multivariable phase margin theorem. The stumbling block in many adaptive design methodologies is associated with the amount of real time computation which is necessary. Attention is also given to the desperate need to develop good theories for large-scale systems, the beginning of a microprocessor revolution, the translation of the Wiener-Hopf theory into the time domain, and advances made in dynamic team theory, dynamic stochastic games, and finite memory stochastic control.

The supply model of the IandC system modernization at VVER 1000 units of the NPP Temelin

International Nuclear Information System (INIS)

Tomicek, L.

1997-01-01

The history of the instrumentation and control system of the Temelin nuclear power plant is briefly mentioned. An upgrading of this system was initiated, aimed at enhancement of nuclear safety and at increasing the economical effectiveness of electricity production. The final supplier of the new system is SKODA PRAHA, the Westinghouse Electric Co. being the sub-supplier. By modernization of the IandC system, conditions have been created for an up-to-date WWER-1000 type unit which copes with the current requirements on nuclear safety and operating economy. (A.K.)

Uses of ORACLE in the Nova Laser Control System

International Nuclear Information System (INIS)

McGuigan, D.L.

1983-01-01

The Nova Laser System is a large-scale fusion experiment being constructed at the Lawrence Livermore National Laboratory. Modern control system technology is required to efficiently manage the thousands of devices needed to operate the system. In order to reduce the requirements on the operations staff, much of the system is being automated. This requires a significant knowledge base including frequently used system configurations and device parameters. We will be using ORACLE to provide this information to the control system. To insure the control-system integrity, ORACLE will be used to maintain information about the control-system software. This information will be used to document the system as well as help track down problems. ORACLE will also be used to maintain data on the system performance. This data will be analyzed to optimize the laser performance and point out when maintenance is required

Results from modernization of the containment localization systems of the Kozloduy NPP units 3 and 4

International Nuclear Information System (INIS)

Sabinov, S.

2005-01-01

The improvements of the Accident Localization System (SLA) of units 3 and 4 systematically implemented by Kozloduy NPP shows an important direction for increasing the safety of NPP with WWER-440/V-230 containments. During the years Kozloduy NPP implemented a large scope of activities aimed in full resolution of all generic shortcomings identified in the original design of these containments. These activities allowed already in 2002 to justify that integrity of the containment is assured for all postulated events and the radiological consequences for all DBAs and BDBAs without core degradation are within the regulatory limits. The last phase of this modernization was oriented toward achieving the same goals in case of severe accidents by installation of systems for avoiding long term pressurization of the SG compartments and by installation of a system for keeping of negative pressure (slight vacuum) during the late phases of development of the accidents thus minimizing significantly the uncontrolled radioactive releases from the containment and assured controlled purified release of radioactivity to environment, and for elimination of conditions for H2 deflagration within the localization system. This paper summarizes the results of the whole modernization process with an emphasis of the implementation of the latest phase successfully completed by Kozloduy NPP in first quarter of 2005 which allowed the plant to demonstrate remarkable mitigation capability for a comprehensive set of very low probability severe accidents scenarios in line with the approach now being promoted for the modern design NPPs

Redesign and modernization of radioactive waste administration systems in Ukraine

Energy Technology Data Exchange (ETDEWEB)

Nieder-Westermann, Gerald H.; Walther, Thorsten; Krone, Juergen [DBE Technology GmbH, Peine (Germany)

2016-06-15

The European Commission (EC) has undertaken a series of projects to render assistance to Ukraine in modernizing and redesigning the Ukrainian approach to the administration, management and ultimately disposal of all forms of radioactive waste, including waste associated with the Chornobyl accident as well as waste generated as part of the Ukrainian energy infrastructure and from industrial and medical applications. One of the most recently completed projects focused on modernizing Ukraine's management and administrative systems responsible for the disposal of radioactive waste.

Redesign and modernization of radioactive waste administration systems in Ukraine

International Nuclear Information System (INIS)

Nieder-Westermann, Gerald H.; Walther, Thorsten; Krone, Juergen

2016-01-01

The European Commission (EC) has undertaken a series of projects to render assistance to Ukraine in modernizing and redesigning the Ukrainian approach to the administration, management and ultimately disposal of all forms of radioactive waste, including waste associated with the Chornobyl accident as well as waste generated as part of the Ukrainian energy infrastructure and from industrial and medical applications. One of the most recently completed projects focused on modernizing Ukraine's management and administrative systems responsible for the disposal of radioactive waste.

Data-Driven Based Asynchronous Motor Control for Printing Servo Systems

Science.gov (United States)

Bian, Min; Guo, Qingyun

Modern digital printing equipment aims to the environmental-friendly industry with high dynamic performances and control precision and low vibration and abrasion. High performance motion control system of printing servo systems was required. Control system of asynchronous motor based on data acquisition was proposed. Iterative learning control (ILC) algorithm was studied. PID control was widely used in the motion control. However, it was sensitive to the disturbances and model parameters variation. The ILC applied the history error data and present control signals to approximate the control signal directly in order to fully track the expect trajectory without the system models and structures. The motor control algorithm based on the ILC and PID was constructed and simulation results were given. The results show that data-driven control method is effective dealing with bounded disturbances for the motion control of printing servo systems.

Mathematical Systems Theory : from Behaviors to Nonlinear Control

CERN Document Server

Julius, A; Pasumarthy, Ramkrishna; Rapisarda, Paolo; Scherpen, Jacquelien

2015-01-01

This treatment of modern topics related to mathematical systems theory forms the proceedings of a workshop, Mathematical Systems Theory: From Behaviors to Nonlinear Control, held at the University of Groningen in July 2015. The workshop celebrated the work of Professors Arjan van der Schaft and Harry Trentelman, honouring their 60th Birthdays. The first volume of this two-volume work covers a variety of topics related to nonlinear and hybrid control systems. After giving a detailed account of the state of the art in the related topic, each chapter presents new results and discusses new directions. As such, this volume provides a broad picture of the theory of nonlinear and hybrid control systems for scientists and engineers with an interest in the interdisciplinary field of systems and control theory. The reader will benefit from the expert participants’ ideas on exciting new approaches to control and system theory and their predictions of future directions for the subject that were discussed at the worksho...

Modernization and establishment of computer controlled technical complex to receive and process data from the space crafts

International Nuclear Information System (INIS)

Kaluzhniy, E.; Muhamedgaliev, A.; Bimagambetov, T; Usenov, F.

1996-01-01

Laboratory-Researching Base of the Scientific and Research Institute of Radio Electronics includes the complex of radio-electronic facilities, that have either military or civil assignments. Analysis of technical features of the complex and of its potential showed the potentials of modernization of the complex in the interest of solving national economical and applied scientific problems subject to sufficient modernization level. In the present report the modernization of the telemetric station and of the quanta-optical system 'Sazhen' is examined. Modernization of the telemetric station (originally designated to receive and register the telemetric information in the meter and decimeter range of waves) consists of the development of the high-frequency tract of the station up to 8192 MHz (the frequency of the space system G osuro 01 ) and the development of the system of decoding and registration of the data of distance sounding. Modernization of the quanta-optical system (originally designated for highly precise measurement of the space ship orbit elements at the altitude up to 40,000 km) consists of adding the functions of collecting coordinate and the functions of astronomic pass instrument with the photoelectric registration and automatic information searching. Realization of the modernization will make possible to create technical instruments of the system of the operative space monitoring of the Kazakstan, s territory and to get the instrument, materializing the natural sample of the universal time

Traffic Efficiency Evaluation of Elliptical Roundabout Compared with Modern and Turbo Roundabouts Considering Traffic Signal Control

Directory of Open Access Journals (Sweden)

Hadi Hatami

2017-02-01

Full Text Available This paper compared the performance of elliptical roundabout with turbo and modern roundabouts. It considers the effects of increasing the central island radius and speed limit on delay and capacity. Three types of roundabouts (modern, turbo and elliptical roundabouts with different numbers of lanes (single lane, two-lane and three-lane were designed. Unsignalized and signalized controls were applied for these roundabouts. The robustness of the designed roundabouts was investigated for saturated and unsaturated flow conditions. Based on the obtained results, increasing the central island radius had both positive and negative effects on delay and capacity. However, a positive effect on these variables was observed in all roundabouts when increasing the speed limit. In unsignalized and signalized control under unsaturated flow conditions, a modern roundabout had lower delay time than an elliptical roundabout. Moreover, in saturated flow, the elliptical roundabout had the best performance in terms of delay. Overall, in comparison with the turbo roundabouts, modern and elliptical roundabouts had the highest capacities in unsignalized and signalized controls. This study can provide useful information for engineers who decide to design a roundabout.

Modern control strategies of doubly-fed induction generator based wind turbine system

DEFF Research Database (Denmark)

Zhou, Dao; Song, Yipeng; Blaabjerg, Frede

2016-01-01

A doubly-fed induction generator (DFIG) based configuration is still preferred by wind turbine manufactures due to the cost-effective power converter and independent control of the active power and reactive power. To cope with stricter grid codes (e.g. reactive power compensation, low voltage ride......, with the control targets of the smooth active and reactive power or the balances and sinusoidal current of the rotor-side converter and the grid-side converter. Finally, a bandwidth based repetitive controller is evaluated to improve the DFIG system's robustness against grid frequency deviation....

Optimal Control and Forecasting of Complex Dynamical Systems

CERN Document Server

Grigorenko, Ilya

2006-01-01

This important book reviews applications of optimization and optimal control theory to modern problems in physics, nano-science and finance. The theory presented here can be efficiently applied to various problems, such as the determination of the optimal shape of a laser pulse to induce certain excitations in quantum systems, the optimal design of nanostructured materials and devices, or the control of chaotic systems and minimization of the forecast error for a given forecasting model (for example, artificial neural networks). Starting from a brief review of the history of variational calcul

CICERO: Control Information system Concepts based\

CERN Multimedia

2002-01-01

RD38 : Modern High Energy Physics experiments and accelerators require sophisticated control systems to ensure their safe operation and to optimise their performance. Due to their complexity and to the large number of sensors needed for these purposes, they turn out to be difficult and costly to maintain with the present technology. The situation will seriously worsen with the LHC era. Various R\\&D departments of industrial companies are directly concerned with similar difficulties in power plants and complex automated systems. We propose to combine our efforts to study the various aspects of this problem. We intend to outline the main building blocks of generic control information system. As a result of this study we aim to provide technical solutions which could later be the major components of a basic turnkey system for medium to large scale HEP experiments and accelerators.

Modern recording systems for services able to meet the competition; Moderne Erfassungssysteme fuer wettbewerbsfaehige Dienstleistungen

Energy Technology Data Exchange (ETDEWEB)

Drumm, M.

2000-07-01

Modern recording systems form the basis for competitive services. They are, however, only successful when integrated precisely into a lean running organization. By means of practical examples the necessity to place great emphasis on the costs of a system besides the investment costs when deciding about a recording system, will be examined. The significant changes on the energy market and the increasing demand of the housing economy for a comprehensive offer of services from the supply industry are main initiators for a whole new line of businesses on the supply economy sector. The great challenge for the supply industry lies in the task to install lean and effective system which are on one hand reliable and easy to handle for the whole duration of the contract and on the other hand are so cost efficient, that an adequate profitability can be ensured (see also: 'The secret winners', Zfk October 1999). A decisive factor for this reason is the metering technology, which has to ensure for the whole duration of the contract that correct consumption values are registered, on the basis of which as fast and punctual as possible a legally safe invoicing can be prepared. (orig.) [German] Moderne Erfassungssysteme bilden die Grundlage fuer wettbewerbsfaehige Dienstleistungen, die jedoch erst bei sauberer Einbindung in eine schlanke Ablauforganisation erfolgreich sind. Anhand von Praxisbeispielen wird die Notwendigkeit betrachtet, bei der Entscheidung fuer ein Erfassungssystem neben den Investitionskosten den Systemkosten entscheidendes Gewicht zu verleihen. (orig.)

Installation and commissioning of operation nuclear power plant reactor protection system modernization project

International Nuclear Information System (INIS)

Lu Weiwei

2010-01-01

Qinshan Nuclear Power Plant is the first nuclear power plant in mainland China; it is also the first one which realizes the modernization of analog technology based Reactor Protection System in the operation nuclear power plant of China. The implementation schedule is the shortest one which use same digital technology platform (TELEPERM XS of AREVA NP) to modifying the safety class I and C system in the world, the whole project spent 28 months from equipment contract signed to putting system into operation. It open up a era for operation nuclear power plant using mature digital technology to make safety class I and C system modernization in China. The important practical significance of this successful project is very obvious. This article focus on two important project stage--equipment installation and system commissioning, it is based on a large number of engineering implementation fact, it covers the problems and solutions happened during the installation and commission. The purpose of the article is to share the experience and lessons of safety I and C system modernization for other operation nuclear power plant. (authors)

Replacement of coal-fuelled stoves by modern room heating systems in multistorey dwellings; Abloesung der Kohle-Einzelofenheizung durch moderne Raumheizungssysteme in Mehrgeschossbauten

Energy Technology Data Exchange (ETDEWEB)

Lindner, K. [Institut fuer Energetik und Umwelt gGmbH, Leipzig (Germany)

1997-12-31

In eastern Germany, approximately one million residential units in multi-storey apartment buildings are still heated with coal-fired stoves. Not all building societies or private house-owners can afford to substitute modern heating systems for individual coal stoves within the foreseeable future. Problems encountered when modernizing heating systems are described. A way of pre-financing modernization is by loans given by the tenants to the building society. The paper deals with individual aspects, such as contract conditions, organization and experience with this model, as well as its advantages for the landlord and tenant. (MSK) [Deutsch] In Ostdeutschland werden noch rund 1 Million Wohnungen in mehrgeschossigen Wohnhaeuern mit Kohle geheizt. Nicht alle Wohnungsgenossenschaften oder privaten Hauseigentuemer sind finanziell in der Lage in absehbarer Zeit die Kohle-Einzelheizung durch moderne Heizungssysteme abzuloesen. Im Folgenden werden die Probleme bei der Heizungsmodernisierung beschrieben. Der Weg Heizungsmodernisierung durch Mieterdarlehen wird in einzelnen Punkten wie Finanzierung durch Mieterdarlehen, deren Organisation und Erfahrungen mit diesem Modell sowie die Vorteile fuer Vermieter und Mieter dargelegt.

Diagnostics of materials and structures of heating system as a component of ecological management in a modern city

Directory of Open Access Journals (Sweden)

Verstina Natalia

2016-01-01

Full Text Available The maintenance of materials and structures of the underground space in modern cities which contains many engineering structures is considered in the article. It is claimed on the example of quantitative data that the underground structures exert a great influence on the ecological situation of the city. The matters of the research included the analysis of the main heating systems as the most responsible city structure; the conclusions obtained can be also used for smaller heat pipelines. The article includes the comparisons of modern technical methods of diagnostics of materials and heating systems structures according to the results of experiment, as well as the characteristic of norms of control of the materials condition at the stages of construction and maintenance applied in the developed countries. On this basis, the author has developed and presented a system of diagnostics taking into account the alternation of measures during the heating period as well as the season when heat supply is not required. For an effective ecological management in modern cities, it is suggested to create the automated data base of materials and structures of the heating systems on the basis of the developed scheme of their conditions and events, which needs to be used for forecasting of environmental risks and planning of recovery works with consideration of special features of the maintenance processes. The direction of the further research is defined: it is the expansion of the stated approaches on other types of underground communications in modern cities.

Experimental investigation of control absorber blade effects in a modern 10x10 BWR assembly

Energy Technology Data Exchange (ETDEWEB)

Jatuff, F.; Grimm, P.; Murphy, M.; Luethi, A.; Seiler, R.; Joneja, O.; Meister, A.; Geemert, R. van; Brogli, R.; Chawla, R. [Paul Scherrer Inst., CH-5232 Villigen PSI (Switzerland); Williams, T. [EGL Laufenburg (Switzerland); Helmersson, S. [Westinghouse Atom (Sweden)

2001-03-01

The accurate estimation of reactor physics parameters related to the presence of cruciform absorber blades. In Boiling Water Reactors (BWR) is important for safety assessment, and for achieving a flexible operation during the cycle. Characteristics which are affected strongly include the power distribution for controlled core regions and its impact on linear heat generation rate margins, as well as the build-up of plutonium, and its influence on core excess reactivity and the reactivity worth of the shutdown system. PSI and the Swiss Nuclear Utilities (UAK) are conducting an experimental reactor physics programme related to modern Light Water Reactor (LWR) fuel assemblies, as employed in the Swiss nuclear power plants: the so-called. LWR-PROTEUS Phase I project. A significant part of this project has been devoted to the characterization of highly heterogeneous BWR fuel elements in the presence of absorber blades. The paper presents typical results for the performance of modern lattice codes in the estimation of controlled assembly reaction rate distributions, the sensitivity to the geometrical and material characterization, and a preliminary comparison of reflected-test-zone calculations with experimental reaction rate distributions measured in a Westinghouse SVEA-96+ assembly under full-density water moderation conditions in the presence of Westinghouse boron-carbide absorber blades. (author)

Experimental investigation of control absorber blade effects in a modern 10x10 BWR assembly

International Nuclear Information System (INIS)

Jatuff, F.; Grimm, P.; Murphy, M.; Luethi, A.; Seiler, R.; Joneja, O.; Meister, A.; Geemert, R. van; Brogli, R.; Chawla, R.; Williams, T.; Helmersson, S.

2001-01-01

The accurate estimation of reactor physics parameters related to the presence of cruciform absorber blades. In Boiling Water Reactors (BWR) is important for safety assessment, and for achieving a flexible operation during the cycle. Characteristics which are affected strongly include the power distribution for controlled core regions and its impact on linear heat generation rate margins, as well as the build-up of plutonium, and its influence on core excess reactivity and the reactivity worth of the shutdown system. PSI and the Swiss Nuclear Utilities (UAK) are conducting an experimental reactor physics programme related to modern Light Water Reactor (LWR) fuel assemblies, as employed in the Swiss nuclear power plants: the so-called. LWR-PROTEUS Phase I project. A significant part of this project has been devoted to the characterization of highly heterogeneous BWR fuel elements in the presence of absorber blades. The paper presents typical results for the performance of modern lattice codes in the estimation of controlled assembly reaction rate distributions, the sensitivity to the geometrical and material characterization, and a preliminary comparison of reflected-test-zone calculations with experimental reaction rate distributions measured in a Westinghouse SVEA-96+ assembly under full-density water moderation conditions in the presence of Westinghouse boron-carbide absorber blades. (author)

Modern Methods of Multidimensional Data Visualization: Analysis, Classification, Implementation, and Applications in Technical Systems

Directory of Open Access Journals (Sweden)

I. K. Romanova

2016-01-01

Full Text Available The article deals with theoretical and practical aspects of solving the problem of visualization of multidimensional data as an effective means of multivariate analysis of systems. Several classifications are proposed for visualization techniques, according to data types, visualization objects, the method of transformation of coordinates and data. To represent classification are used charts with links to the relevant work. The article also proposes two classifications of modern trends in display technology, including integration of visualization techniques as one of the modern trends of development, along with the introduction of interactive technologies and the dynamics of development processes. It describes some approaches to the visualization problem, which are concerned with fulfilling the needs. The needs are generated by the relevant tasks such as information retrieval in global networks, development of bioinformatics, study and control of business processes, development of regions, etc. The article highlights modern visualization tools, which are capable of improving the efficiency of the multivariate analysis and searching for solutions in multi-objective optimization of technical systems, but are not very actively used for such studies. These are horizontal graphs, graphics "quantile-quantile", etc. The paper proposes to use Choropleth cards traditionally used in cartography for simultaneous presentation of the distribution parameters of several criteria in the space. It notes that visualizations of graphs in network applications can be more actively used to describe the control system. The article suggests using the heat maps to provide graphical representation of the sensitivity of the system quality criteria under variations of options (multivariate analysis of technical systems. It also mentions that it is useful to extend the supervising heat maps to the task of estimating quality of identify in constructing system models. A

Nuclear weapons modernization: Plans, programs, and issues for Congress

Science.gov (United States)

Woolf, Amy F.

2017-11-01

The United States is currently recapitalizing each delivery system in its "nuclear triad" and refurbishing many of the warheads carried by those systems. The plans for these modernization programs have raised a number of questions, both within Congress and among analysts in the nuclear weapons and arms control communities, about the costs associated with the programs and the need to recapitalize each leg of the triad at the same time. This paper covers four distinct issues. It begins with a brief review of the planned modernization programs, then addresses questions about why the United States is pursuing all of these modernization programs at this time. It then reviews the debate about how much these modernization programs are likely to cost in the next decade and considers possible changes that might reduce the cost. It concludes with some comments about congressional views on the modernization programs and prospects for continuing congressional support in the coming years.

The energy consumption of control systems; Het energiegebruik van regelinstallaties

Energy Technology Data Exchange (ETDEWEB)

Van Gulik, A.R.; De Wildt, M.G. [Grontmij Nederland, Amersfoort (Netherlands)

2013-07-15

Control systems for e.g. indoor climate and illumination are essential in modern building services, and useful for comfort or energy conservation. Energy conservation is of course an important aim, but what is the energy consumption of the control systems? Is the consumption higher than the savings? This question was subject of a comprehensive study, with measurements and simulation calculations. It can be concluded that the energy consumption of control installation for spaces is substantial [Dutch] Regelinstallaties voor bijvoorbeeld klimaatregeling, verlichtingsregeling en domotica zijn niet meer weg te denken uit de moderne installatietechniek, of ze nu dienen voor comfort, gemak of energiebesparing. Maar hoeveel energie gebruiken deze installaties eigenlijk? Voor ontwerpers blijkt dit helemaal geen issue te zijn terwijl adviseurs, installateurs en zelfs fabrikanten zeggen hiervan geen idee te hebben. Door metingen en het gebruik van berekeningsmodellen is vastgesteld wat het energiegebruik van regelinstallaties op jaarbasis is. Dit blijkt substantieel te zijn, maar er zijn mogelijkheden om het gebruik te reduceren.

Semantic Linkage of Control Systems

Directory of Open Access Journals (Sweden)

Rolf Andreas Rasenack

2006-01-01

Full Text Available Control systems are sets of interconnected hardware and software components which regulate the behaviour of processes. The software of modern control systems rises for some years by requirements regarding the flexibility and functionality. Thus the force of innovation grows on enterprises, since ever newer products in ever shorter time intervals must be made available. Associated hereby is the crucial shortening of the product life cycle, whose effects show up in reduced care of the software and the spares inventory. The aim, the concept presented here and developed in a modeling environment, is proved and ensures a minimum functionality of software components. Replacing software components of a control system verified for functionality by a framework at run-time and if necessary the software conditions will become adapted. Quintessential point of this implementation is the usage of an abstract syntax tree. Within its hierarchical structure meta information is attached to nodes and processed by the framework. With the development of the concept for semantic proving of software components the lifetime of software-based products is increased.

Methodology supporting production control in a foundry applying modern DISAMATIC molding line

Directory of Open Access Journals (Sweden)

Sika Robert

2017-01-01

Full Text Available The paper presents methodology of production control using statistical methods in foundry conditions, using the automatic DISAMATIC molding line. The authors were inspired by many years of experience in implementing IT tools for foundries. The authors noticed that there is a lack of basic IT tools dedicated to specific casting processes, that would greatly facilitate their oversight and thus improve the quality of manufactured products. More and more systems are installed in the ERP or CAx area, but they integrate processes only partially, mainly in the area of technology design and business management from finance and control. Monitoring of foundry processes can generate a large amount of process-related data. This is particularly noticeable in automated processes. An example is the modern DISAMATIC molding line, which integrates several casting processes, such as mold preparation, assembly, pouring or shake out. The authors proposed a methodology that supports the control of the above-mentioned foundry processes using statistical methods. Such an approach can be successfully used, for example, during periodic external audits. The mentioned methodology in the innovative DISAM-ProdC computer tool was implemented.

Control system for a heavy-ion accelerator complex K4 - K10

International Nuclear Information System (INIS)

Kotov, V.M.; Pose, R.

1992-01-01

Control systems for newly created accelerators, perhaps for the first time, may be designed almost only around international standards for communication and control techniques. This is also true for the project of a control system for the accelerator complex K4-K10 at the Joint Institute for Nuclear Research Dubna. Nevertheless, open systems architecture with construction principles being essential for modern systems of such big devices as particle accelerators leaves designers enough possibilities for solving even very sophisticated problems. (author)

Towards Modern Collaborative Knowledge Sharing Systems

CERN Document Server

Świrski, Konrad

2012-01-01

The development of new technologies still accelerates. As a result the requirement of easy access to high quality information is essential in modern scientific society. We believe that new cloud-based online system will replace the old system of books and magazines in the future. This is mainly because contemporary system of journal and conference publications appears to be outdated, especially in such domains as computer science, because process of publishing of an article takes too much time. In this book a new approach of sharing knowledge is proposed. The main idea behind this new approach is to take advantage of collaboration techniques used in industry to share the knowledge and build teams which work on the same subject at different locations. This will allow to accelerate the exchange of information between scientists and allow to build global teams of researchers who deal with the same scientific subjects. Furthermore, an easy access to structured knowledge will facilitate cross domain cooperation. T...

Present status of control system at the SRRC

International Nuclear Information System (INIS)

Jan, G.J.; Chen, J.; Chen, C.J.; Wang, C.S.

1992-01-01

The modern control technique was used to design and set up a control system for the synchrotron radiation facilities at the synchrotron radiation research center (SRRC). This control system will be finally to operate the dedicated machine to provide the 1.3 GeV synchrotron radiation light. The control system will control and monitor the components of storage ring, beam transport and injector system. The concept of the philosophy is to design a unique, simple structure and object-oriented graphic display control system. The SRRC control system has the major features such as two level architecture, high speed local area network with high level protocol, high speed microprocessor based VME crate, object-oriented high performance control console and graphic display. The computer hardware system was set up and tested. The software in top level computers which include database server, network server, upload program, data access program, alarm checking and display, as well as graphics user interface (GUI) program were developed and tested. The operational system and device driver on the field level controller were implemented. The overall performance of the SRRC control system were tested and evaluation. The preliminary results showed that SRRC control system is simple, flexible, expandable and upgradable open system to control and monitor devices on the small scale synchrotron radiation facility. (author)

Neural network application to aircraft control system design

Science.gov (United States)

Troudet, Terry; Garg, Sanjay; Merrill, Walter C.

1991-01-01

The feasibility of using artificial neural network as control systems for modern, complex aerospace vehicles is investigated via an example aircraft control design study. The problem considered is that of designing a controller for an integrated airframe/propulsion longitudinal dynamics model of a modern fighter aircraft to provide independent control of pitch rate and airspeed responses to pilot command inputs. An explicit model following controller using H infinity control design techniques is first designed to gain insight into the control problem as well as to provide a baseline for evaluation of the neurocontroller. Using the model of the desired dynamics as a command generator, a multilayer feedforward neural network is trained to control the vehicle model within the physical limitations of the actuator dynamics. This is achieved by minimizing an objective function which is a weighted sum of tracking errors and control input commands and rates. To gain insight in the neurocontrol, linearized representations of the nonlinear neurocontroller are analyzed along a commanded trajectory. Linear robustness analysis tools are then applied to the linearized neurocontroller models and to the baseline H infinity based controller. Future areas of research identified to enhance the practical applicability of neural networks to flight control design.

Neural network application to aircraft control system design

Science.gov (United States)

Troudet, Terry; Garg, Sanjay; Merrill, Walter C.

1991-01-01

The feasibility of using artificial neural networks as control systems for modern, complex aerospace vehicles is investigated via an example aircraft control design study. The problem considered is that of designing a controller for an integrated airframe/propulsion longitudinal dynamics model of a modern fighter aircraft to provide independent control of pitch rate and airspeed responses to pilot command inputs. An explicit model following controller using H infinity control design techniques is first designed to gain insight into the control problem as well as to provide a baseline for evaluation of the neurocontroller. Using the model of the desired dynamics as a command generator, a multilayer feedforward neural network is trained to control the vehicle model within the physical limitations of the actuator dynamics. This is achieved by minimizing an objective function which is a weighted sum of tracking errors and control input commands and rates. To gain insight in the neurocontrol, linearized representations of the nonlinear neurocontroller are analyzed along a commanded trajectory. Linear robustness analysis tools are then applied to the linearized neurocontroller models and to the baseline H infinity based controller. Future areas of research are identified to enhance the practical applicability of neural networks to flight control design.

Advanced Instrumentation, Information, and Control Systems Technologies Technical Program Plan

Energy Technology Data Exchange (ETDEWEB)

Bruce Hallbert

2012-09-01

Reliable instrumentation, information, and control (II&C) systems technologies are essential to ensuring safe and efficient operation of the U.S. light water reactor (LWR) fleet. These technologies affect every aspect of nuclear power plant (NPP) and balance-of-plant operations. In 1997, the National Research Council conducted a study concerning the challenges involved in modernization of digital instrumentation and control systems in NPPs. Their findings identified the need for new II&C technology integration.

Migration of Older to New Digital Control Systems in Nuclear Power Plant Main Control Rooms

Energy Technology Data Exchange (ETDEWEB)

Kovesdi, Casey Robert [Idaho National Lab. (INL), Idaho Falls, ID (United States); Joe, Jeffrey Clark [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2016-04-01

The United States (U.S.) Department of Energy (DOE) Office of Nuclear Energy (NE) has the primary mission to advance nuclear power by resolving socio-technical issues through research and development (R&D). One DOE-NE activity supporting this mission is the Light Water Reactor Sustainability (LWRS) program. LWRS has the overall objective to sustain the operation of existing commercial nuclear power plants (NPPs) through conducting R&D across multiple “pathways,” or R&D focus areas. The Advanced Instrumentation, Information, and Control (II&C) Systems Technologies pathway conducts targeted R&D to address aging and reliability concerns with the legacy instrumentation and control (I&C) and related information systems in operating U.S. NPPs. This work involves (1) ensuring that legacy analog II&C systems are not life-limiting issues for the LWR fleet, and (2) implementing digital II&C technology in a manner that enables broad innovation and business improvement in the NPP operating model. Under the LWRS Advanced II&C pathway, Human Factors experts at Idaho National Laboratory (INL) have been conducting R&D in support of NPP main control room (MCR) modernization activities. Work in prior years has focused on migrating analog I&C systems to new digital I&C systems (). In fiscal year 2016 (FY16), one new focus area for this research is migrating older digital I&C systems to new and advanced digital I&C systems. This report summarizes a plan for conducting a digital-to-digital migration of a legacy digital I&C system to a new digital I&C system in support of control room modernization activities.

Migration of Older to New Digital Control Systems in Nuclear Power Plant Main Control Rooms

International Nuclear Information System (INIS)

Kovesdi, Casey Robert; Joe, Jeffrey Clark

2016-01-01

The United States (U.S.) Department of Energy (DOE) Office of Nuclear Energy (NE) has the primary mission to advance nuclear power by resolving socio-technical issues through research and development (R&D). One DOE-NE activity supporting this mission is the Light Water Reactor Sustainability (LWRS) program. LWRS has the overall objective to sustain the operation of existing commercial nuclear power plants (NPPs) through conducting R&D across multiple ''pathways,'' or R&D focus areas. The Advanced Instrumentation, Information, and Control (II&C) Systems Technologies pathway conducts targeted R&D to address aging and reliability concerns with the legacy instrumentation and control (I&C) and related information systems in operating U.S. NPPs. This work involves (1) ensuring that legacy analog II&C systems are not life-limiting issues for the LWR fleet, and (2) implementing digital II&C technology in a manner that enables broad innovation and business improvement in the NPP operating model. Under the LWRS Advanced II&C pathway, Human Factors experts at Idaho National Laboratory (INL) have been conducting R&D in support of NPP main control room (MCR) modernization activities. Work in prior years has focused on migrating analog I&C systems to new digital I&C systems (). In fiscal year 2016 (FY16), one new focus area for this research is migrating older digital I&C systems to new and advanced digital I&C systems. This report summarizes a plan for conducting a digital-to-digital migration of a legacy digital I&C system to a new digital I&C system in support of control room modernization activities.

Climatic and physiological controls on the stable isotope composition of modern and ancient Cupressaceae

Science.gov (United States)

Zinniker, D.; Tipple, B.; Pagani, M.

2007-12-01

Unique and abundant secondary metabolites found in waxes and resins of the Callitroid, Cupressoid, and Taxodioid clades of the Cupressaceae family can be identified and quantified in complex mixtures of sedimentary organic compounds. This unusual feature makes it possible to study relatively simple (taxon-specific) isotope systems back in time across the broad array of environments in which these conifers are found. Work on these systems can potentially provide both robust paleoenvironmental proxies (i.e. for source water δD and growing season relative humidity) and quantitative probes into the ecophysiology of these plants in modern and ancient environments. Our research focuses on three genera representing environmental end-members of Cupressaceae - Juniperus, Thuja, and Chamaecyparis - (1) across geographic and environmental gradients in the field, and (2) in specific Holocene and late Pleistocene environmental records. The latter research focuses on peat cores from New England and Oregon and fossil packrat middens from the southwestern United States. Modern transects highlight the sensitivity of Cupressaceae to climatic variables. These include both variables during growth (relative humidity, soil moisture, etc.) and variables affecting seasonal and diurnal growth rates (temperature, winter precipitation, insolation, microhabitat, etc.). Work on ancient records has demonstrated the sensitivity of these unique taxon-specific archives to both subtle and dramatic climate shifts during the Pleistocene and Holocene. This work will result in an improved understanding of climatic and physiological controls on the stable isotopic composition of modern and ancient Cupressaceae - and by extension, other arborescent gymnosperms and C3 plants - providing a framework for understanding more complexly sourced organic inputs to sediments, coals, and petroleum prior to the advent of C4 plants. This research also has direct implications for stratigraphic stable isotope studies

NSTX-U Control System Upgrades

International Nuclear Information System (INIS)

Erickson, K.G.; Gates, D.A.; Gerhardt, S.P.; Lawson, J.E.; Mozulay, R.; Sichta, P.; Tchilinguirian, G.J.

2014-01-01

The National Spherical Tokamak Experiment (NSTX) is undergoing a wealth of upgrades (NSTX-U). These upgrades, especially including an elongated pulse length, require broad changes to the control system that has served NSTX well. A new fiber serial Front Panel Data Port input and output (I/O) stream will supersede the aging copper parallel version. Driver support for the new I/O and cyber security concerns require updating the operating system from Redhat Enterprise Linux (RHEL) v4 to RedHawk (based on RHEL) v6. While the basic control system continues to use the General Atomics Plasma Control System (GA PCS), the effort to forward port the entire software package to run under 64-bit Linux instead of 32-bit Linux included PCS modifications subsequently shared with GA and other PCS users. Software updates focused on three key areas: (1) code modernization through coding standards (C99/C11), (2) code portability and maintainability through use of the GA PCS code generator, and (3) support of 64-bit platforms. Central to the control system upgrade is the use of a complete real time (RT) Linux platform provided by Concurrent Computer Corporation, consisting of a computer (iHawk), an operating system and drivers (RedHawk), and RT tools (NightStar). Strong vendor support coupled with an extensive RT toolset influenced this decision. The new real-time Linux platform, I/O, and software engineering will foster enhanced capability and performance for NSTX-U plasma control

NSTX-U Control System Upgrades

Energy Technology Data Exchange (ETDEWEB)

Erickson, K.G., E-mail: kerickso@pppl.gov; Gates, D.A.; Gerhardt, S.P.; Lawson, J.E.; Mozulay, R.; Sichta, P.; Tchilinguirian, G.J.

2014-06-15

The National Spherical Tokamak Experiment (NSTX) is undergoing a wealth of upgrades (NSTX-U). These upgrades, especially including an elongated pulse length, require broad changes to the control system that has served NSTX well. A new fiber serial Front Panel Data Port input and output (I/O) stream will supersede the aging copper parallel version. Driver support for the new I/O and cyber security concerns require updating the operating system from Redhat Enterprise Linux (RHEL) v4 to RedHawk (based on RHEL) v6. While the basic control system continues to use the General Atomics Plasma Control System (GA PCS), the effort to forward port the entire software package to run under 64-bit Linux instead of 32-bit Linux included PCS modifications subsequently shared with GA and other PCS users. Software updates focused on three key areas: (1) code modernization through coding standards (C99/C11), (2) code portability and maintainability through use of the GA PCS code generator, and (3) support of 64-bit platforms. Central to the control system upgrade is the use of a complete real time (RT) Linux platform provided by Concurrent Computer Corporation, consisting of a computer (iHawk), an operating system and drivers (RedHawk), and RT tools (NightStar). Strong vendor support coupled with an extensive RT toolset influenced this decision. The new real-time Linux platform, I/O, and software engineering will foster enhanced capability and performance for NSTX-U plasma control.

Foundational Report Series. Advanced Distribution management Systems for Grid Modernization (Importance of DMS for Distribution Grid Modernization)

Energy Technology Data Exchange (ETDEWEB)

Wang, Jianhui [Argonne National Lab. (ANL), Argonne, IL (United States)

2015-09-01

Grid modernization is transforming the operation and management of electric distribution systems from manual, paper-driven business processes to electronic, computer-assisted decisionmaking. At the center of this business transformation is the distribution management system (DMS), which provides a foundation from which optimal levels of performance can be achieved in an increasingly complex business and operating environment. Electric distribution utilities are facing many new challenges that are dramatically increasing the complexity of operating and managing the electric distribution system: growing customer expectations for service reliability and power quality, pressure to achieve better efficiency and utilization of existing distribution system assets, and reduction of greenhouse gas emissions by accommodating high penetration levels of distributed generating resources powered by renewable energy sources (wind, solar, etc.). Recent “storm of the century” events in the northeastern United States and the lengthy power outages and customer hardships that followed have greatly elevated the need to make power delivery systems more resilient to major storm events and to provide a more effective electric utility response during such regional power grid emergencies. Despite these newly emerging challenges for electric distribution system operators, only a small percentage of electric utilities have actually implemented a DMS. This paper discusses reasons why a DMS is needed and why the DMS may emerge as a mission-critical system that will soon be considered essential as electric utilities roll out their grid modernization strategies.

Techniques for increasing the reliability of accelerator control system electronics

International Nuclear Information System (INIS)

Utterback, J.

1993-09-01

As the physical size of modern accelerators becomes larger and larger, the number of required control system circuit boards increases, and the probability of one of those circuit boards failing while in service also increases. In order to do physics, the experimenters need the accelerator to provide beam reliably with as little down time as possible. With the advent of colliding beams physics, reliability becomes even more important due to the fact that a control system failure can cause the loss of painstakingly produced antiprotons. These facts prove the importance of keeping reliability in mind when designing and maintaining accelerator control system electronics

Air Traffic Control: Status of FAA's Implementation of the Display System Replacement Project

National Research Council Canada - National Science Library

1999-01-01

...) implementation of the Display System Replacement (DSR) project. DSR, which replaces the controllers' workstations and other equipment in the nation's en route centers, is one of FAA's major projects under the air traffic control modernization program...

Foundational Report Series: Advanced Distribution Management Systems for Grid Modernization, DMS Integration of Distributed Energy Resources and Microgrids

Energy Technology Data Exchange (ETDEWEB)

Singh, Ravindra [Argonne National Lab. (ANL), Argonne, IL (United States); Reilly, James T. [Reilly Associates, Pittston, PA (United States); Wang, Jianhui [Argonne National Lab. (ANL), Argonne, IL (United States); Lu, Xiaonan [Argonne National Lab. (ANL), Argonne, IL (United States); Kang, Ning [Argonne National Lab. (ANL), Argonne, IL (United States)

2017-03-01

Deregulation of the electric utility industry, environmental concerns associated with traditional fossil fuel-based power plants, volatility of electric energy costs, Federal and State regulatory support of “green” energy, and rapid technological developments all support the growth of Distributed Energy Resources (DERs) in electric utility systems and ensure an important role for DERs in the smart grid and other aspects of modern utilities. DERs include distributed generation (DG) systems, such as renewables; controllable loads (also known as demand response); and energy storage systems. This report describes the role of aggregators of DERs in providing optimal services to distribution networks, through DER monitoring and control systems—collectively referred to as a Distributed Energy Resource Management System (DERMS)—and microgrids in various configurations.

Applied optimal control theory of distributed systems

CERN Document Server

Lurie, K A

1993-01-01

This book represents an extended and substantially revised version of my earlierbook, Optimal Control in Problems ofMathematical Physics,originally published in Russian in 1975. About 60% of the text has been completely revised and major additions have been included which have produced a practically new text. My aim was to modernize the presentation but also to preserve the original results, some of which are little known to a Western reader. The idea of composites, which is the core of the modern theory of optimization, was initiated in the early seventies. The reader will find here its implementation in the problem of optimal conductivity distribution in an MHD-generatorchannel flow.Sincethen it has emergedinto an extensive theory which is undergoing a continuous development. The book does not pretend to be a textbook, neither does it offer a systematic presentation of the theory. Rather, it reflects a concept which I consider as fundamental in the modern approach to optimization of dis­ tributed systems. ...

Emission factors and chemical characterisation of fine particulate emissions from modern and old residential biomass heating systems determined for typical load cycles; Emissionsfaktoren und chemische Charakterisierung von Feinstaubemissionen moderner und alter Biomasse-Kleinfeuerungen ueber typische Tageslastverlaeufe

Energy Technology Data Exchange (ETDEWEB)

Kelz, Joachim [BIOENERGY 2020+ GmbH, Graz (Austria); Brunner, Thomas; Obernberger, Ingwald [BIOENERGY 2020+ GmbH, Graz (Austria); Technische Universitaet Graz, Institut fuer Prozess- und Partikeltechnik, Graz (Austria); BIOS BIOENERGIESYSTEME GmbH, Graz (Austria)

2012-12-15

It is already well known that there are significant differences regarding the emissions, especially particulate matter (PM) emissions, of old and modern as well as automatically and not automatically controlled biomass based residential heating systems. This concerns their magnitude as well as their chemical composition. In order to investigate emission factors for particulate emissions and the chemical compositions of the PM emissions over typical whole day operation cycles, a project on the determination and characterisation of PM emissions from the most relevant small-scale biomass combustion systems was performed at the BIOENERGY 2020+ GmbH, Graz, Austria, in cooperation with the Institute for Process and Particle Engineering, Graz University of Technology. The project was based on test stand measurements, during which relevant operation parameters (gaseous emissions, boiler load, flue gas temperature, combustion chamber temperature etc.) as well as PM emissions have been measured and PM samples have been taken and forwarded to chemical analyses. Firstly, typical whole day operation cycles for residential biomass combustion systems were specified for the test runs. Thereby automatically fed and automatically controlled boilers, manually fed and automatically controlled boilers as well as manually fed stoves were distinguished. The results show a clear correlation between the gaseous emissions (CO and OGC) and the PM{sub 1} emissions. It is indicated that modern biomass combustion systems emit significantly less gaseous and PM emissions than older technologies (up to a factor of 100). Moreover, automatically fed systems emit much less gaseous and PM emissions than manually fed batch-combustion systems. PM emissions from modern and automatically controlled systems mainly consist of alkaline metal salts, while organic aerosols and soot dominate the composition of aerosols from old and not automatically controlled systems. As an important result comprehensive data

Instrumentation and control program to support modernization of safety and control in NPPs

International Nuclear Information System (INIS)

Wilkinson, D.; James, R.; Naser, J.; Torok, R.

1997-01-01

The original analog IandC equipment of most operating nuclear power plants requires increasing maintenance efforts to sustain system performance. Decreasing availability of replacement parts and support organizations for analog technology accentuate obsolescence problems and resultant OandM cost increases. Modern technology, especially digital systems, offers improved functionality, performance and reliability; solutions to obsolescence of equipment; reduction in OandM costs; and the potential to enhance safety. Digital systems with their inherent advantages will be implemented only if reliable and cost-effective implementation is achieved and if the upgraded system supports reduced power production costs. EPRI and its member utilities are working together under the Integrated IandC Upgrade Initiative to address IandC issues. The present paper describes and gives the status of EPRI's Integrated IandC Upgrade Initiative. (author)

Design of model based LQG control for integrated building systems

NARCIS (Netherlands)

Yahiaoui, A.; Hensen, J.L.M.; Soethout, L.L.; Paassen, van A.H.C.

2006-01-01

The automation of the operation of integrated building systems requires using modern control techniques to enhance the quality of the building indoor environments. This paper describes the theatrical base and practical application of an optimal dynamic regulator using modelbased Linear Quadratic

A novel multi-drive electric vehicle system control based on multi-input multi-output PID controller

Directory of Open Access Journals (Sweden)

Gasbaoui Brahim

2012-01-01

Full Text Available In-wheel-motor drive electric vehicle (EV is an innovative configuration of the modern EV, in which each wheel is driven individually by an electric motor. The classical traction motor control called the Independent Machine Control Structure (IMCS using a PID speed controller presents major inconveniences in modern EV safety, when the proposed control can not ensure stability of the EV with differing road topology and variations of speed. A new approach is proposed for a control of a two-in-wheel-motor drive EV, called the Maximum Control Structure MCS. This is based on a multivariable PID (MIMO-PID strategy, which is employed to estimate the linear speed error of each of the two back driving wheels, when the error of each wheel is taken into account in the other speed control computations. Simulation results show that the new control system presents increased safety for the EVs compared with the IMCS strategy and can maintain the error slip rate within the optimal range, ensuring the stability of the vehicle either in a straight or a curved line.

Network technology for depot modernization

Energy Technology Data Exchange (ETDEWEB)

Hostick, C.J.

1990-12-01

This report was prepared by the Pacific Northwest Laboratory to summarize existing and emerging information system technology and standards applicable to Depot System Command (DESCOM) modernization efforts. The intent of this summarization is to provide the Revitalization of Army Depots for the Year 2000 (READY 2000) team a clear understanding of the enabling information system technologies required to support effective modernization activities. Much of the information contained in this report was acquired during the last year in support of the US Army Armament, Munitions, and Chemical Command (AMCCOM) Facility Integrated Manufacturing Management System (FIMMS) project at PNL, which is targeting the modernization of plant-wide information systems at Army Ammunition Plants. The objective of information system modernization is to improve the effectiveness of an organization in performing its mission. Information system modernization strives to meet this objective by creating an environment where data is electronically captured near the source and readily available to all areas of the organization. Advanced networks, together with related information system technology, are the enabling mechanisms that make modern information system infrastructures possible. The intent of this paper is to present an overview of advanced information system network technology to support depot modernization planners in making technology management decisions. Existing and emerging Open System Interconnection (OSI) and Government Open System Interconnection Profile (GOSIP) standards are explained, as well as a brief assessment of existing products compliant with these standards. Finally, recommendations for achieving plant-wide integration using existing products are presented, and migration strategies for full OSI compliance are introduced. 5 refs., 16 figs. (JF)

Theory of Systems and Social-Political Realities of Modern Russia

Directory of Open Access Journals (Sweden)

V A Annikova

2013-12-01

Full Text Available The article examines the process of forming the theory of systems as a scientific paradigm of social-humanitarian cognition. Focusing their attention on the interpretations of the structural composition of a political system, the authors analyze the relations between the state and the citizens of modern Russia, the actually effective mechanisms of interaction between the authorities and public associations.

Units 3 and 4 steam generators new water level control system

International Nuclear Information System (INIS)

Dragoev, D.; Genov, St.

2001-01-01

The Steam Generator Water Level Control System is one of the most important for the normal operation systems, related to the safety and reliability of the units. The main upgrading objective for the SG level and SGWLC System modernization is to assure an automatic maintaining of the SG level within acceptable limits (below protections and interlocks) from 0% to 100% of the power in normal operation conditions and in case of transients followed by disturbances in the SG controlled parameters - level, steam flow, feedwater flow and/or pressure/temperature. To achieve this objective, the computerized controllers of new SG water level control system follows current computer control technology and is implemented together with replacement of the feedwater control valves and the needed I and C equipment. (author)

Application of Ethernet Powerlink for communication in a Linux RTAI open CNC control system

OpenAIRE

Erwiński, Krystian; Paprocki, Marcin; Grzesiak, Lech; Karwowski, Kazimierz; Wawrzak, Andrzej

2013-01-01

In computerized numerical control (CNC) systems, the communication bus between the controller and axis servo drives must offer high bandwidth, noise immunity, and time determinism. More and more CNC systems use real-time Ethernet protocols such as Ethernet Powerlink (EPL). Many modern controllers are closed costly hardware-based solutions. In this paper, the implementation of EPL communication bus in a PC-based CNC system is presented. The CNC system includes a PC, a s...

Establishing a value chain for human factors in nuclear power plantcontrol room modernization

Energy Technology Data Exchange (ETDEWEB)

Joe, Jeffrey Clark [Idaho National Laboratory; Thomas, Kenneth David [Idaho National Laboratory; Boring, Ronald Laurids [Idaho National Laboratory

2015-07-01

Commercial nuclear power plants in the United States (U.S.) have operated reliably and efficiently for decades. With the life extensions of plants now being planned for operation beyond their original operating licenses, there are opportunities to achieve even greater efficiencies, while maintaining high operational reliabilities, with strategic, risk- and economically-informed, upgrades to plant systems and infrastructure. The U.S. Department of Energy’s Light Water Reactor Sustainability (LWRS) program supports the commercial nuclear industry’s modernization efforts through research and development (R&D) activities across many areas to help establish the technical and economic bases for modernization activities. The Advanced Instrumentation, Information, and Control Systems Technologies pathway is one R&D focus area for the LWRS program, and has researchers at Idaho National Laboratory working with select utility partners to use human factors and instrumentation and controls R&D to help modernize the plant’s main control room. However, some in the nuclear industry have not been as enthusiastic about using human factors R&D to inform life extension decision making. Part of the reason for this may stem from uncertainty decision-makers have regarding how human factors fits into the value chain for nuclear power plant control room modernization. This paper reviews past work that has attempted to demonstrate the value of human factors, and then describes the value chain concept, how it applies to control room modernization, and then makes a case for how and why human factors is an essential link in the modernization value chain.

Sexual Harassment in the Workplace. Unanticipated Consequences of Modern Social Control in Organizations.

Science.gov (United States)

Mueller, Charles W.; De Coster, Stacy; Estes, Sarah Beth

2001-01-01

Modern organizational changes purportedly intended to increase job satisfaction and reduce turnover are actually forms of social control. Analysis of data from 6,000 employees found that an unintended yet beneficial consequence of these changes is reduced sexual harassment. (Contains 60 references.) (SK)

Process control in conventional power plants. The use of computer systems

Energy Technology Data Exchange (ETDEWEB)

Schievink, A; Woehrle, G

1989-03-01

To process information man can use his knowledge and his experience. Both these means however, permit only slow flows of information (about 25 bit/s) to be processed. The flow of information in a modern 700-MW-coal power station that the staff has to face is about 5000 bit per second, i.e. 200 times as much as a single human brain can process. One therefore needs modern computer-controlled process control systems which support the staff in recognizing and processing the complicated and rapid processes in such a way that the servicing staff is efficiently supported. The computer-man interface is ergonomically improved by visual display units.

How to design electrical systems with central control capability for industrial plants

Energy Technology Data Exchange (ETDEWEB)

Cigolini, S.; Galati, G.; Lionetto, P.F.; Stiz, M. (Siemens, Milan (Italy) Centro Elettrotecnico Sperimentale Italiano, Milan (Italy))

1991-12-01

The modern centralized control system, incorporating microprocessors, constitutes an extremely efficacious instrument for the management of an industrial plant's electrical system and provides the performance, reliability, flexibility and safety features required by today's technologically advanced plant processes. The use of intelligent centralized control systems, capable of autonomous operation and dialoguing with industrial plant electrical systems, simplifies the design of the overall plant. This paper reviews the main design criteria for the automated systems and gives examples of some suitable commercially available intelligent systems.

Concept of development of integrated computer - based control system for 'Ukryttia' object

International Nuclear Information System (INIS)

Buyal'skij, V.M.; Maslov, V.P.

2003-01-01

The structural concept of Chernobyl NPP 'Ukryttia' Object's integrated computer - based control system development is presented on the basis of general concept of integrated Computer - based Control System (CCS) design process for organizing and technical management subjects.The concept is aimed at state-of-the-art architectural design technique application and allows using modern computer-aided facilities for functional model,information (logical and physical) models development,as well as for system object model under design

Analysis and design of hybrid control systems

Energy Technology Data Exchange (ETDEWEB)

Malmborg, J.

1998-05-01

Different aspects of hybrid control systems are treated: analysis, simulation, design and implementation. A systematic methodology using extended Lyapunov theory for design of hybrid systems is developed. The methodology is based on conventional control designs in separate regions together with a switching strategy. Dynamics are not well defined if the control design methods lead to fast mode switching. The dynamics depend on the salient features of the implementation of the mode switches. A theorem for the stability of second order switching together with the resulting dynamics is derived. The dynamics on an intersection of two sliding sets are defined for two relays working on different time scales. The current simulation packages have problems modeling and simulating hybrid systems. It is shown how fast mode switches can be found before or during simulation. The necessary analysis work is a very small overhead for a modern simulation tool. To get some experience from practical problems with hybrid control the switching strategy is implemented in two different software environments. In one of them a time-optimal controller is added to an existing PID controller on a commercial control system. Successful experiments with this hybrid controller shows the practical use of the method 78 refs, 51 figs, 2 tabs

Military Health System Transformation Implications on Health Information Technology Modernization.

Science.gov (United States)

Khan, Saad

2018-03-01

With the recent passage of the National Defense Authorization Act for Fiscal Year 2017, Congress has triggered groundbreaking Military Health System organizational restructuring with the Defense Health Agency assuming responsibility for managing all hospitals and clinics owned by the Army, Navy, and Air Force. This is a major shift toward a modern value-based managed care system, which will require much greater military-civilian health care delivery integration to be in place by October 2018. Just before the National Defense Authorization Act for Fiscal Year 2017 passage, the Department of Defense had already begun a seismic shift and awarded a contract for the new Military Health System-wide electronic health record system. In this perspective, we discuss the implications of the intersection of two large-scope and large-scale initiatives, health system transformation, and information technology modernization, being rolled out in the largest and most complex federal agency and potential risk mitigating steps. The Military Health System will require an expanded unified clinical leadership to spearhead short-term transformation; furthermore, developing, organizing, and growing a cadre of informatics expertise to expand the use and diffusion of novel solutions such as health information exchanges, data analytics, and others to transcend organizational barriers are still needed to achieve the long-term aim of health system reform as envisioned by the National Defense Authorization Act for Fiscal Year 2017.

Knowledge management in modern organization based on systems III platform ICT

Directory of Open Access Journals (Sweden)

Piotr Adamczewski

2016-12-01

Full Text Available Systems ICT (Information and Communication Technology form the basis of modern economic organizations. In particular, the intelligent organizations for which advanced ICT infrastructure is a sine qua non for effective knowledge management. This article aims to show the role of modern trends of ICT referred to as SMAC (Social, Mobility, Analytics, Cloud, and which are currently canon IT support management processes. These solutions allow you to create new models of organization functioning in global markets with the use of strategic resources, which is the knowledge assisted solutions SMAC.

Modernization of the WWER 440/230 nuclear power plant environmental protection system

Energy Technology Data Exchange (ETDEWEB)

Mikheev, N.V.; Kamenskaya, A.N.; Kulyukhin, S.A.; Novichenko, V.L.; Rumer, I.A. [Russian Academy of Sciences, Institute of Physical Chemistry, Moscow (Russian Federation); Antonov, B.V.; Kornienko, A.G.; Meshkov, V.M.; Rogov, M.F. [Rosenergoatom Concern, Moscow (Russian Federation)

2001-07-01

The papers reports a new approach to the problem of increasing environmental protection during severe accidents at WWER 440/230 nuclear power plants. The environmental protection system that we propose has three, not two protection levels, and can be introduced with minor modernization of the equipment available at WWER 440/230 nuclear power plants: 1. a jet-vortex condenser; 2. the sprinkler system; 3. a sorption module. The proposed modernization not only makes it possible to avoid emergency discharge of radioactive air and steam mix into the environment under any accident scenario, but also would substantially contribute to the safety of WWER 440/230 nuclear power plants. (author)

Nonlinear control systems - A brief overview of historical and recent advances

Science.gov (United States)

Iqbal, Jamshed; Ullah, Mukhtar; Khan, Said Ghani; Khelifa, Baizid; Ćuković, Saša

2017-12-01

Last five decades witnessed remarkable developments in linear control systems and thus problems in this subject has been largely resolved. The scope of the present paper is beyond linear solutions. Modern technology demands sophisticated control laws to meet stringent design specifications thus highlighting the increasingly conspicuous position of nonlinear control systems, which is the topic of this paper. Historical role of analytical concepts in analysis and design of nonlinear control systems is briefly outlined. Recent advancements in these systems from applications perspective are examined with critical comments on associated challenges. It is anticipated that wider dissemination of this comprehensive review will stimulate more collaborations among the research community and contribute to further developments.

Features of cycles of Russian modernization in the context of the world-systems analysis

Directory of Open Access Journals (Sweden)

P. I. Pashkovsky

2014-02-01

Full Text Available The article describes the historical cycle of Russian modernization. It is shown that the first cycle lasted from the late XVII before the second decade of the XIX century. At this time modernization in the form of «westernization» contributed to the fact that in the XVIII century (in the period between the reigns of Peter I and Catherine II Russia integrated into the world capitalist system and she was positioned as semi­periphery. But Russia was an empire in her characteristics also she has been active in foreign policy. And her desire to overcome the peripheral processes and closer to the core of the world­system resulted in «catch­up» nature of modernization of Russian society. Russia’s victory in the Patriotic War of 1812 characterizes the overall positive outcome for her of this cycle of modernization. The second cycle dates from the late 50’s XIX – beginning of XX century. It was an example of the liberal model of modernization. As a result the lack of economic resources, «the nationalist conservatism» of the authorities, «bureaucratically directed industrialization» and accelerated modernization led to the tragedy of Russia in World War I and the revolutionary events of 1917. The choice in favor of self­sufficiency was made in the late 1920’s – early 1930’s, this marked the beginning of the third cycle of modernization of Russia in the form of industrialization, which has produced results. Economic growth continued after World War II as a result of implementation of five­year plans. The fourth cycle of Russian modernization characterized the events of «perestroika» the second half of the 1980’s and the period of post­Soviet Russia of the 1990’s. Consequently, Russian Federation is in a position semi­periphery, and most of the New Independent States – within the periphery of the world capitalist system. It is proved that the first and third cycles belonged to the imperial model of modernization, and the

Study concerning the power plant control and safety equipment by integrated distributed systems

International Nuclear Information System (INIS)

Optea, I.; Oprea, M.; Stanescu, P.

1995-01-01

The paper deals with the trends existing in the field of nuclear control and safety equipment and systems, proposing a high-efficiency integrated system. In order to enhance the safety of the plant and reliability of the structure system and components, we present a concept based on the latest computer technology with an open, distributed system, connected by a local area network with high redundancy. A modern conception for the control and safety system is to integrate all the information related to the reactor protection, active engineered safeguard and auxiliary systems parameters, offering a fast flow of information between all the agencies concerned so that situations can be quickly assessed. The integrated distributed control is based on a high performance operating system for realtime applications, flexible enough for transparent networking and modular for demanding configurations. The general design considerations for nuclear reactors instrumentation reliability and testing methods for real-time functions under dynamic regime are presented. Taking into account the fast progress in information technology, we consider the replacement of the old instrumentation of Cernavoda-1 NPP by a modern integrated system as an economical and efficient solution for the next units. (Author) 20 Refs

The strategy for intelligent integrated instrumentation and control system development

International Nuclear Information System (INIS)

Kwon, Kee Choon; Ham, Chang Shik

1995-01-01

All of the nuclear power plants in Korea are operating with analog instrumentation and control ( I and C) equipment which are increasingly faced with frequent troubles, obsolescence and high maintenance expenses. Electrical and computer technology has improved rapidly in recent years and has been applied to other industries. So it is strongly recommended we adopt modern digital and computer technology to improve plant safety and availability. The advanced I and C system, namely, Integrated Intelligent Instrumentation and Control System (I 3 Cs) will be developed for beyond the next generation nuclear power plant. I 3 CS consists of three major parts, the advanced compact workstation, distributed digital control and protection system including Automatic Start-up/Shutdown Intelligent Control System (ASICS) and the computer-based alarm processing and operator support system, namely, Diagnosis, Response, and operator Aid Management System (DREAMS)

Dynamics of underactuated multibody systems modeling, control and optimal design

CERN Document Server

Seifried, Robert

2014-01-01

Underactuated multibody systems are intriguing mechatronic systems, as they possess fewer control inputs than degrees of freedom. Some examples are modern light-weight flexible robots and articulated manipulators with passive joints. This book investigates such underactuated multibody systems from an integrated perspective. This includes all major steps from the modeling of rigid and flexible multibody systems, through nonlinear control theory, to optimal system design. The underlying theories and techniques from these different fields are presented using a self-contained and unified approach and notation system. Subsequently, the book focuses on applications to large multibody systems with multiple degrees of freedom, which require a combination of symbolical and numerical procedures. Finally, an integrated, optimization-based design procedure is proposed, whereby both structural and control design are considered concurrently. Each chapter is supplemented by illustrated examples.

Passive immunisation, an old idea revisited: Basic principles and application to modern animal production systems

DEFF Research Database (Denmark)

Hedegaard, Chris Juul; Heegaard, Peter M. H.

2016-01-01

immunisation (vaccination) in which an immunological memory is established by controlled exposure of the host to the pathogen in question. With multi-factorial infectious diseases in production animals, especially those that have proven hard to control by vaccination, the potential of passive immunisation...... remains big. This review highlights a number of examples on the use of passive immunisation for the control of infectious disease in the modern production of a range of animals, including pigs, cattle, sheep, goat, poultry and fish. Special emphasis is given on the enablement of passive immunisation...... strategies in these production systems through low cost and ease of use as well as on the sources, composition and purity of immunoglobulin preparations used and their benefits as compared to current measures, including vaccination (also comprising maternal vaccination), antibiotics and feed additives...

The graphics software of the Saclay linear accelerator control system

International Nuclear Information System (INIS)

Gournay, J.F.

1987-06-01

The Control system of the Saclay Linear Accelerator is based upon modern technology hardware. In the graphic software, pictures are created in exactly the same manner for all the graphic devices supported by the system. The informations used to draw a picture are stored in an array called a graphic segment. Three output primitives are used to add graphic material in a segment. Three coordinate systems are defined

Moving to a Modernized Height Reference System in Canada: Rationale, Status and Plans

Science.gov (United States)

Veronneau, M.; Huang, J.

2007-05-01

technologies for positioning should naturally move users to the new height reference and offer the possibility of transferring heights over longer distances, within the precision of the geoid model. This transition will also reduce user dependency on a dense network of benchmarks and offer the possibility for geodetic agencies to provide the reference frame with a reduced number of 3D control points. While the rationale for moving to a modernized height system is easily understood, the acceptance of the new system by users will only occur gradually as they adopt new technologies and procedures to access the height reference. A stakeholder consultation indicates user readiness and an implementation plan is starting to unfold. This presentation will look at the current state of the geoid model and control networks that will support the modernized height system. Results of the consultation and the recommendations regarding the roles and responsibilities of the various stakeholders involved in implementing the transition will also be reported.

Boiler house modernization through shared savings program

Energy Technology Data Exchange (ETDEWEB)

Breault, R.W. [Tecogen, Waltham, MA (United States)

1995-12-31

Throughout Poland as well as the rest of Eastern Europe, communities and industries rely on small heat only boilers to provide district and process heat. Together these two sectors produce about 85,000 MW from boilers in the 2 to 35 MW size range. The bulk of these units were installed prior to 1992 and must be completely overhauled to meet the emission regulations which will be coming into effect on January 1, 1998. Since the only practical fuel is coal in most cases, these boilers must be either retrofit with emission control technology or be replaced entirely. The question that arises is how to accomplish this given the current tight control of capital in Poland and other East European countries. A solution that we have for this problem is shared savings. These boilers are typically operating with a quiet low efficiency as compared to western standards and with excessive manual labor. Installing modernization equipment to improve the efficiency and to automate the process provides savings. ECOGY provides the funds for the modernization to improve the efficiency, add automation and install emission control equipment. The savings that are generated during the operation of the modernized boiler system are split between the client company and ECOGY for a number of years and then the system is turned over in entirety to the client. Depending on the operating capacity, the shared savings agreement will usually span 6 to 10 years.

Steps towards modern trends in district heating

Directory of Open Access Journals (Sweden)

Vasek Lubomir

2017-01-01

Full Text Available This paper focuses on new trends in district heating a cooling (DHC area and algorithms allowing incorporating new technologies and performing optimal control. Classical district heating usually means huge source (as heating plant and set of pipes which transfer heat energy through a medium, mostly water, across whole town and chilled water is returning back to the plant. Let’s imagine a modern city where buildings are consuming only a fraction of the energy contrary to what buildings required in the past. And especially during sunny or windy days, they have energy to spare. Around of such modern city is not only the one big heating plant, but perhaps solar and wind farms, waste incinerators, industrial companies with energy surpluses. Simply in this modern city are dozens, perhaps hundreds of small energy producers that share pipe network or at least part of it. In such a district energy system, production planning is more difficult. And not only production, modern houses with minimal heat loss and data connections also allow to plan consumption more effectively. The aim is to achieve the best solution evaluated by the objective function, usually determined by minimizing the production and distribution costs and providing meets the needs of energy consumers. The method presented in this paper is based on a simulation using the proposed holonic distributed model. This model also introduces the idea of general prosumers strategy, where all active elements within the modern DHC system are represented by prosumer objects. The prosumers are perceived as objects able to actively participate in the planning and realization of the production and consumption of energy. It is assumed that the general behaviour of the object in DHC is the same, no matter how they differ in size and design. Thus, all the objects are defined by two characteristics - the ability to produce and consume. The model based on this basic principle, of course, with the most

Cardea: Dynamic Access Control in Distributed Systems

Science.gov (United States)

Lepro, Rebekah

2004-01-01

Modern authorization systems span domains of administration, rely on many different authentication sources, and manage complex attributes as part of the authorization process. This . paper presents Cardea, a distributed system that facilitates dynamic access control, as a valuable piece of an inter-operable authorization framework. First, the authorization model employed in Cardea and its functionality goals are examined. Next, critical features of the system architecture and its handling of the authorization process are then examined. Then the S A M L and XACML standards, as incorporated into the system, are analyzed. Finally, the future directions of this project are outlined and connection points with general components of an authorization system are highlighted.

Improving the speed of AFM by mechatronic design and modern control methods

International Nuclear Information System (INIS)

Schitter, Georg

2009-01-01

In Atomic Force Microscopy (AFM) high-performance and high-precision control of the AFM scanner and of the imaging forces is crucial. Particularly at high imaging speeds the dynamic behaviour of the scanner may cause imaging artifacts and limit the maximum imaging rate. This contribution discusses and presents recent improvements in AFM instrumentation for faster imaging by means of mechatronic design and utilizing modern control engineering methods. Combining these improvements enables AFM imaging at more than two orders of magnitudes faster than conventional AFMs. (orig.)

Transient stability enhancement of modern power grid using predictive Wide-Area Monitoring and Control

Science.gov (United States)

Yousefian, Reza

This dissertation presents a real-time Wide-Area Control (WAC) designed based on artificial intelligence for large scale modern power systems transient stability enhancement. The WAC using the measurements available from Phasor Measurement Units (PMUs) at generator buses, monitors the global oscillations in the system and optimally augments the local excitation system of the synchronous generators. The complexity of the power system stability problem along with uncertainties and nonlinearities makes the conventional modeling non-practical or inaccurate. In this work Reinforcement Learning (RL) algorithm on the benchmark of Neural Networks (NNs) is used to map the nonlinearities of the system in real-time. This method different from both the centralized and the decentralized control schemes, employs a number of semi-autonomous agents to collaborate with each other to perform optimal control theory well-suited for WAC applications. Also, to handle the delays in Wide-Area Monitoring (WAM) and adapt the RL toward the robust control design, Temporal Difference (TD) is proposed as a solver for RL problem or optimal cost function. However, the main drawback of such WAC design is that it is challenging to determine if an offline trained network is valid to assess the stability of the power system once the system is evolved to a different operating state or network topology. In order to address the generality issue of NNs, a value priority scheme is proposed in this work to design a hybrid linear and nonlinear controllers. The algorithm so-called supervised RL is based on mixture of experts, where it is initialized by linear controller and as the performance and identification of the RL controller improves in real-time switches to the other controller. This work also focuses on transient stability and develops Lyapunov energy functions for synchronous generators to monitor the stability stress of the system. Using such energies as a cost function guarantees the convergence

Eye Carduino: A Car Control System using Eye Movements

Science.gov (United States)

Kumar, Arjun; Nagaraj, Disha; Louzardo, Joel; Hegde, Rajeshwari

2011-12-01

Modern automotive systems are rapidly becoming highly of transportation, but can be a web integrated media centre. This paper explains the implementation of a vehicle control defined and characterized by embedded electronics and software. With new technologies, the vehicle industry is facing new opportunities and also new challenges. Electronics have improved the performance of vehicles and at the same time, new more complex applications are introduced. Examples of high level applications include adaptive cruise control and electronic stability programs (ESP). Further, a modern vehicle does not have to be merely a means using only eye movements. The EyeWriter's native hardware and software work to return the co-ordinates of where the user is looking. These co-ordinates are then used to control the car. A centre-point is defined on the screen. The higher on the screen the user's gaze is, the faster the car will accelerate. Braking is done by looking below centre. Steering is done by looking left and right on the screen.

Effect of yogic education system and modern education system on memory.

Science.gov (United States)

Rangan, R; Nagendra, Hr; Bhat, G Ramachandra

2009-07-01

Memory is more associated with the temporal cortex than other cortical areas. The two main components of memory are spatial and verbal which relate to right and left hemispheres of the brain, respectively. Many investigations have shown the beneficial effects of yoga on memory and temporal functions of the brain. This study was aimed at comparing the effect of one Gurukula Education System (GES) school based on a yoga way of life with a school using the Modern Education System (MES) on memory. Forty nine boys of ages ranging from 11-13 years were selected from each of two residential schools, one MES and the other GES, providing similar ambiance and daily routines. The boys were matched for age and socioeconomic status. The GES educational program is based around integrated yoga modules while the MES provides a conventional modern education program. Memory was assessed by means of standard spatial and verbal memory tests applicable to Indian conditions before and after an academic year. Between groups there was matching at start of the academic year, while after it the GES boys showed significant enhancement in both verbal and visual memory scores than MES boys (P < 0.001, Mann-Whitney test). The present study showed that the GES meant for total personality development adopting yoga way of life is more effective in enhancing visual and verbal memory scores than the MES.

Modern technical diagnostic system for the main components of powerful turbine generator

International Nuclear Information System (INIS)

Ezovit, G.P.; Uglyarenko, V.P.; Burlaka, S.I.; Goroz, N.I.; Orinin, S.E.; Komaritsa, V.N.; Zav'yalov, D.N.; Mazurenko, O.A.

2011-01-01

The modern diagnostic system to monitor the technical state of a powerful turbine generator is considered. This system permits the detection of defects in its main components and cooling system at the early stage of their development, prevention of damage and, as a consequence, emergency shutdown of nuclear power units

Old Wine in New Bottles-The SPEAR Control System Upgrade

Energy Technology Data Exchange (ETDEWEB)

Rarback, Harvey

1999-10-19

The control systems for the SPEAR storage ring and injector were designed almost two decades ago and have worked reliably for us. Both systems are heavily dependent on the OpenVMS operating system and CAMAC. The realtime data reside in shared memory on a single computer for each control system. In order to use more modern client tools while preserving our investment in the hardware and software, we have installed an EPICS Portable Channel Access Server (CAS) on the control computers. The CAS will serve the existing realtime data as EPICS Process Variables (PVs) and allow us to use client tools like dm2k and IDL running on other workstations to more easily build new operator interfaces and develop accelerator physics programs. The CAS will also provide the infrastructure to help integrate new hardware controlled by EPICS Input/Output Controllers (IOCs).

Computer-based regulating control system for the Advanced Test Reactor

International Nuclear Information System (INIS)

Johnson, M.R.

1983-01-01

This paper describes a new control system which has recently been designed and installed at the Advanced Test Reactor at INEL, replacing an older system that had been in service for some 17 years. Based on modern digital technology, the new system provides improved capability, reliability, and an enhanced man/machine interface that includes comprehensive failure and error messages and voice synthesis. In addition to control functions, and transparent to the operator, the system performs continual on-line checks to sense subsystem failures and takes appropriate automatic action. In the maintenance mode, service technicians can carry on a dialog with the controller to quickly identify faulty components. The operational capabilities of the new system are summarized, and reactor operator training, experience, and acceptance of the system are discussed

Pc based RF control system for the Vincy cyclotron

International Nuclear Information System (INIS)

Samardzic, B.J.; Drndarevic, V.R.

1999-01-01

The concept and design procedure for the RF control system of the VINCY cyclotron are described. Special attention has been paid to the choice of computer support of this system. The merits and limitations of the chosen solution have been analyzed. A PC type computer has been selected as the platform for performing the functions of initiation, control, and supervision of the RF system. The integration of the hardware is carried out by direct connection to the PC bus via standard communication interfaces. The system software operates under a graphic oriented Windows operating system applying the modern concept of virtual instrumentation. The application of this concept allowed considerable simplification of the operator-RF system interaction and resulted in additional flexibility of the software to further extensions or modifications of the system. The selected open architecture of the computer platform allows a simple and economic upgrading of the realized system in accordance with future requirements. Tests of the realized RF control system prototype are in progress. (authors)

A VME-based accumulation, control and supervising system for neutron texture measurements

International Nuclear Information System (INIS)

Kirilov, A.S.; Heinitz, J.; Korobchenko, M.L.; Rezaev, V.E.; Sirotin, A.P.

1997-01-01

Nowadays VME-based systems to control neutron measurement instruments are forcing out those built with PC and CAMAC. One of several alternative solutions is presented here. Its main feature is the implementation of the entire system on the VME site. Both the hardware and the software parts are considered. The instrument can be controlled locally or remotely via local network (even from PCs) with a modern-styled graphical user interface

The new control system of the SPS target sector

CERN Document Server

Carlier, E; Mecredy, N; O'Leary, J

1999-01-01

The SPS, the Super Proton Synchrotron at CERN, is an accelerator originally designed and commissioned in 1976 for protons. The control system of the SPS target stations, beam absorbers and other aperture limiting devices was developed in the seventies. It was mainly based on home made electronics and equipment dependent software. With time, this electronics has become obsolete, difficult to maintain in operation and not suitable for integration into a modern control system. In 1997, a project was set up to modernise the electronics and the related software. The new control system is largely based on standard industrial hardware and software components. SIEMENS Simatic S7-300 programmable logic controllers have been used as equipment controllers and connected through PROFIBUS to a Windows-NT front-end PC running the SIEMENS WinCC SCADA package which acts as local controller and remote access gateway. This fully industrial solution has been successfully integrated into the actual SPS accelerator control infrast...

The remote system explorer modern developer tools for the system I

CERN Document Server

Yantzi, Don

2008-01-01

Focusing exclusively on the Remote System Explorer (RSE) within the popular WebSphere Development Studio Client (WDSC), this comprehensive study contains both technical and practical tutorials. Allowing developers to use modern techniques within several programs, this survey covers topics such as getting started, terminology, installation, managing i5/OS objects and members, editing, compiling, and debugging. Each chapter features key views, actions, keyboard shortcuts, and troubleshooting tips. Illustrated with countless examples and detailed screen shots, this reference makes the RSE accessi

From Living Space to Cultural Space: How a Modern University Academy System Is Possible

Science.gov (United States)

Zhang, Yingqiang; Fang, Hualiang

2018-01-01

The reforms on the modern university academy system that preserve certain elements of China's ancient traditional academies have currently encountered a series of difficulties. The crux of the problem is that living and educational spaces were integrated in the traditional academy, while modern school education institution has separated the two.…

Potential and limitations of modern equipment for real time control of urban wastewater systems

DEFF Research Database (Denmark)

Campisano, A.; Cabot Ple, J.; Muschalla, D.

2013-01-01

Real Time Control (RTC) has become an accepted technique for improving the performance of Urban Drainage Systems (UDS) due to its flexibility and sustainability. Numerous implementations of RTC have been reported during the last decades. At the same time, guideline documents and state...... describes the specific components in detail. This comprises the introduction of available technologies for sensors, actuators, controllers and telemetry systems in the context of RTC and the discussion of their potential and limitations. Lessons learned from the field operational experiences and future......-of-the-art reports have been published. Whereas the general aspects and challenges of planning and installation of RTC systems are well covered, there is a lack of information about the adequate equipment for RTC of UDS. After identifying and briefly discussing the basic components of RTC systems for UDS, this paper...

A Smart Home Test Bed for Undergraduate Education to Bridge the Curriculum Gap from Traditional Power Systems to Modernized Smart Grids

Science.gov (United States)

Hu, Qinran; Li, Fangxing; Chen, Chien-fei

2015-01-01

There is a worldwide trend to modernize old power grid infrastructures to form future smart grids, which will achieve efficient, flexible energy consumption by using the latest technologies in communication, computing, and control. Smart grid initiatives are moving power systems curricula toward smart grids. Although the components of smart grids…

Control integral systems; Sistemas integrales de control

Energy Technology Data Exchange (ETDEWEB)

Burgos, Estrella [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1999-12-31

Almost two third of the electric power generation in Mexico are obtained from hydrocarbons, for that reasons Comision Federal de Electricidad (CFE) dedicated special commitment in modernizing the operation of fossil fuel central stations. In attaining this objective the control systems play a fundamental roll, from them depend a good share of the reliability and the efficiency of the electric power generation process, as well as the extension of the equipment useful life. Since 1984 the Instituto de Investigaciones Electricas (IIE) has been working, upon the request of CFE, on the development of digital control systems. To date it has designed and implemented a logic control system for gas burners, which controls 32 burners of the Unit 4 boiler of the Generation Central of Valle de Mexico and two systems for distributed control for two combined cycle central stations, which are: Dos Bocas, Veracruz Combined cycle central, and Gomez Palacio, Durango combined cycle central. With these two developments the IIE enters the World tendency of implementing distributed control systems for the fossil fuel power central update [Espanol] Casi las dos terceras partes de la generacion electrica en Mexico se obtienen a partir de hidrocarburos, es por eso que la Comision Federal de Electricidad (CFE) puso especial empeno en modernizar la operacion de las centrales termoelectricas de combustibles fosiles. En el logro de este objetivo los sistemas de control desempenan un papel fundamental, de ellos depende una buena parte la confiabilidad y la eficiencia en el proceso de generacion de energia electrica, asi como la prolongacion de la vida util de los equipos. Desde 1984 el Instituto de Investigaciones Electricas (IIE) ha trabajado, a solicitud de la CFE, en el desarrollo de sistemas digitales de control. A la fecha se han disenado e implantado un sistema de control logico de quemadores de gas, el cual controla 32 quemadores de la caldera de la unidad 4 de la central de generacion

Control integral systems; Sistemas integrales de control

Energy Technology Data Exchange (ETDEWEB)

Burgos, Estrella [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1998-12-31

Almost two third of the electric power generation in Mexico are obtained from hydrocarbons, for that reasons Comision Federal de Electricidad (CFE) dedicated special commitment in modernizing the operation of fossil fuel central stations. In attaining this objective the control systems play a fundamental roll, from them depend a good share of the reliability and the efficiency of the electric power generation process, as well as the extension of the equipment useful life. Since 1984 the Instituto de Investigaciones Electricas (IIE) has been working, upon the request of CFE, on the development of digital control systems. To date it has designed and implemented a logic control system for gas burners, which controls 32 burners of the Unit 4 boiler of the Generation Central of Valle de Mexico and two systems for distributed control for two combined cycle central stations, which are: Dos Bocas, Veracruz Combined cycle central, and Gomez Palacio, Durango combined cycle central. With these two developments the IIE enters the World tendency of implementing distributed control systems for the fossil fuel power central update [Espanol] Casi las dos terceras partes de la generacion electrica en Mexico se obtienen a partir de hidrocarburos, es por eso que la Comision Federal de Electricidad (CFE) puso especial empeno en modernizar la operacion de las centrales termoelectricas de combustibles fosiles. En el logro de este objetivo los sistemas de control desempenan un papel fundamental, de ellos depende una buena parte la confiabilidad y la eficiencia en el proceso de generacion de energia electrica, asi como la prolongacion de la vida util de los equipos. Desde 1984 el Instituto de Investigaciones Electricas (IIE) ha trabajado, a solicitud de la CFE, en el desarrollo de sistemas digitales de control. A la fecha se han disenado e implantado un sistema de control logico de quemadores de gas, el cual controla 32 quemadores de la caldera de la unidad 4 de la central de generacion

R and D of an LLRF control system for a 162.5 MHz radio frequency system

International Nuclear Information System (INIS)

Wen Lianghua; Wu Xianwu; He Yuan; Zhang Ruifeng; Zhang Shenghu; Zhu Zhenglong; Li Chunlong; Shi Longbo; Zhang Rui; Chang Wei

2013-01-01

This paper describes a low level radio frequency control system that was developed by the Institute of Modern Physics Chinese Academy of Sciences, and will be used in Injector Ⅱ of the China-ADS project. The LLRF control system consists of an RF modulated front end, fast analog-to-digital converter (ADC) modules, and a digital signal processing board based on a field programmable gate array. The system has been tested on a room temperature cavity with 12-hr, and the results illustrate that the stability of amplitude and phase achieved ±0.32% and ±0.35 degrees, respectively. (authors)

Usage of aids monitoring in automatic braking systems of modern cars

OpenAIRE

Dembitskyi V.; Mazylyuk P.; Sitovskyi O.

2016-01-01

Increased safety can be carried out at the expense the installation on vehicles of automatic braking systems, that monitor the traffic situation and the actions of the driver. In this paper considered the advantages and disadvantages of automatic braking systems, were analyzed modern tracking tools that are used in automatic braking systems. Based on the statistical data on accidents, are set the main dangers, that the automatic braking system will be reduced. In order to ensure the acc...

IAEA technical meeting on integrating analog and digital instrumentation and control systems in hybrid main control rooms at nuclear power plants. Book of abstracts

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-07-01

The majority of instrumentation and control (I and C) equipment in nuclear power plants in the world was designed 30 to over 45 years ago with analog and relay components, and in some cases rudimentary digital technology. Today, most of these plants continue to operate with a substantial amount of this original I and C equipment that is or soon will be obsolete. Much of this equipment is approaching or exceeding its life expectancy, resulting in increasing maintenance efforts to sustain acceptable system performance. Decreasing availability of replacement parts, and the accelerating deterioration of the infrastructure of manufacturers that support analog technology, accentuate the obsolescence problems and cause operation and maintenance (O and M) cost increases. Refurbishments and license extensions mean that a plant must be supported longer, which will increase the obsolescence issues. In addition, the older technology limits the possibilities for adding new beneficial capabilities to the plant systems and interfaces. New technology provides the opportunity to improve plant performance, human system interface (HSI) functionality, and reliability; to enhance operator performance and reliability, and to address difficulties in finding young professionals with education and experience with older analog technology. Finally, there may be changes in regulatory requirements that could necessitate modernization activities. Modernization of I and C systems and components, using digital equipment to address these obsolescence issues and the need to improve plant performance (e.g., increase power output capacity, reliability, and availability) while maintaining high levels of safety, is a current major issue for nuclear power plants throughout the world. A number of nuclear power utilities are committing to major modernization programs. The need for this modernization will accelerate as plants age, obsolescence issues increase, plants receive license renewals, and features

TELICS—A Telescope Instrument Control System for Small/Medium Sized Astronomical Observatories

Science.gov (United States)

Srivastava, Mudit K.; Ramaprakash, A. N.; Burse, Mahesh P.; Chordia, Pravin A.; Chillal, Kalpesh S.; Mestry, Vilas B.; Das, Hillol K.; Kohok, Abhay A.

2009-10-01

For any modern astronomical observatory, it is essential to have an efficient interface between the telescope and its back-end instruments. However, for small and medium-sized observatories, this requirement is often limited by tight financial constraints. Therefore a simple yet versatile and low-cost control system is required for such observatories to minimize cost and effort. Here we report the development of a modern, multipurpose instrument control system TELICS (Telescope Instrument Control System) to integrate the controls of various instruments and devices mounted on the telescope. TELICS consists of an embedded hardware unit known as a common control unit (CCU) in combination with Linux-based data acquisition and user interface. The hardware of the CCU is built around the ATmega 128 microcontroller (Atmel Corp.) and is designed with a backplane, master-slave architecture. A Qt-based graphical user interface (GUI) has been developed and the back-end application software is based on C/C++. TELICS provides feedback mechanisms that give the operator good visibility and a quick-look display of the status and modes of instruments as well as data. TELICS has been used for regular science observations since 2008 March on the 2 m, f/10 IUCAA Telescope located at Girawali in Pune, India.

Case studies on design, simulation and visualization of control and measurement applications using REX control system

Energy Technology Data Exchange (ETDEWEB)

Ozana, Stepan, E-mail: stepan.ozana@vsb.cz; Pies, Martin, E-mail: martin.pies@vsb.cz; Docekal, Tomas, E-mail: docekalt@email.cz [VSB-Technical University of Ostrava, Faculty of Electrical Engineering and Computer Science, Department of Cybernetics and Biomedical Engineering, 17. listopadu 15/2172, Ostrava-Poruba, 700 30 (Czech Republic)

2016-06-08

REX Control System is a professional advanced tool for design and implementation of complex control systems that belongs to softPLC category. It covers the entire process starting from simulation of functionality of the application before deployment, through implementation on real-time target, towards analysis, diagnostics and visualization. Basically it consists of two parts: the development tools and the runtime system. It is also compatible with Simulink environment, and the way of implementation of control algorithm is very similar. The control scheme is finally compiled (using RexDraw utility) and uploaded into a chosen real-time target (using RexView utility). There is a wide variety of hardware platforms and real-time operating systems supported by REX Control System such as for example Windows Embedded, Linux, Linux/Xenomai deployed on SBC, IPC, PAC, Raspberry Pi and others with many I/O interfaces. It is modern system designed both for measurement and control applications, offering a lot of additional functions concerning data archiving, visualization based on HTML5, and communication standards. The paper will sum up possibilities of its use in educational process, focused on control of case studies of physical models with classical and advanced control algorithms.

Case studies on design, simulation and visualization of control and measurement applications using REX control system

International Nuclear Information System (INIS)

Ozana, Stepan; Pies, Martin; Docekal, Tomas

2016-01-01

REX Control System is a professional advanced tool for design and implementation of complex control systems that belongs to softPLC category. It covers the entire process starting from simulation of functionality of the application before deployment, through implementation on real-time target, towards analysis, diagnostics and visualization. Basically it consists of two parts: the development tools and the runtime system. It is also compatible with Simulink environment, and the way of implementation of control algorithm is very similar. The control scheme is finally compiled (using RexDraw utility) and uploaded into a chosen real-time target (using RexView utility). There is a wide variety of hardware platforms and real-time operating systems supported by REX Control System such as for example Windows Embedded, Linux, Linux/Xenomai deployed on SBC, IPC, PAC, Raspberry Pi and others with many I/O interfaces. It is modern system designed both for measurement and control applications, offering a lot of additional functions concerning data archiving, visualization based on HTML5, and communication standards. The paper will sum up possibilities of its use in educational process, focused on control of case studies of physical models with classical and advanced control algorithms.

Case studies on design, simulation and visualization of control and measurement applications using REX control system

Science.gov (United States)

Ozana, Stepan; Pies, Martin; Docekal, Tomas

2016-06-01

REX Control System is a professional advanced tool for design and implementation of complex control systems that belongs to softPLC category. It covers the entire process starting from simulation of functionality of the application before deployment, through implementation on real-time target, towards analysis, diagnostics and visualization. Basically it consists of two parts: the development tools and the runtime system. It is also compatible with Simulink environment, and the way of implementation of control algorithm is very similar. The control scheme is finally compiled (using RexDraw utility) and uploaded into a chosen real-time target (using RexView utility). There is a wide variety of hardware platforms and real-time operating systems supported by REX Control System such as for example Windows Embedded, Linux, Linux/Xenomai deployed on SBC, IPC, PAC, Raspberry Pi and others with many I/O interfaces. It is modern system designed both for measurement and control applications, offering a lot of additional functions concerning data archiving, visualization based on HTML5, and communication standards. The paper will sum up possibilities of its use in educational process, focused on control of case studies of physical models with classical and advanced control algorithms.

Requirements of modernization strategies

International Nuclear Information System (INIS)

Heinbuch, R.

1997-01-01

Instrumentation and control contributed a major share to the current level of safety, economic efficiency, and availability of the German nuclear power plants. German NPPs occupy a top position in this respect at international level, but novel instrumentation and digital control technology alone will not guarantee further enhancements. Therefore, the owner/operators established carefully devised maintenance and modernization strategies in order to safeguard their NPPs top position in the long run. The German NPPs are the most thoroughly automated plants of the world. In addition to the sweeping modernization strategies recommended by the plant manufacturers, based on computer-supported control, alternative modernization strategies have been considered in the evaluation process. This approach provides for room for maneuvre, for manufacturers as well as managers responsible for risk and cost optimization, which is a major task in view of the changing regulatory framework in the electricity market. (orig./CB) [de

Effect of yogic education system and modern education system on memory

Directory of Open Access Journals (Sweden)

Rangan R

2009-01-01

Full Text Available Background/Aim: Memory is more associated with the temporal cortex than other cortical areas. The two main components of memory are spatial and verbal which relate to right and left hemispheres of the brain, respectively. Many investigations have shown the beneficial effects of yoga on memory and temporal functions of the brain. This study was aimed at comparing the effect of one Gurukula Education System (GES school based on a yoga way of life with a school using the Modern Education System (MES on memory. Materials and Methods: Forty nine boys of ages ranging from 11-13 years were selected from each of two residential schools, one MES and the other GES, providing similar ambiance and daily routines. The boys were matched for age and socioeconomic status. The GES educational program is based around integrated yoga modules while the MES provides a conventional modern education program. Memory was assessed by means of standard spatial and verbal memory tests applicable to Indian conditions before and after an academic year. Results: Between groups there was matching at start of the academic year, while after it the GES boys showed significant enhancement in both verbal and visual memory scores than MES boys (P < 0.001, Mann-Whitney test. Conclusions: The present study showed that the GES meant for total personality development adopting yoga way of life is more effective in enhancing visual and verbal memory scores than the MES.

Formal approach to modeling of modern Information Systems

Directory of Open Access Journals (Sweden)

Bálint Molnár

2016-01-01

Full Text Available Most recently, the concept of business documents has started to play double role. On one hand, a business document (word processing text or calculation sheet can be used as specification tool, on the other hand the business document is an immanent constituent of business processes, thereby essential component of business Information Systems. The recent tendency is that the majority of documents and their contents within business Information Systems remain in semi-structured format and a lesser part of documents is transformed into schemas of structured databases. In order to keep the emerging situation in hand, we suggest the creation (1 a theoretical framework for modeling business Information Systems; (2 and a design method for practical application based on the theoretical model that provides the structuring principles. The modeling approach that focuses on documents and their interrelationships with business processes assists in perceiving the activities of modern Information Systems.

The system architecture of the new JET Shape Controller

International Nuclear Information System (INIS)

Sartori, F.; Ambrosino, G.; Ariola, M.; Cenedese, A.; Crisanti, F.; Tommasi, G. De; Cullen, P. Mc; Piccolo, F.; Pironti, A.

2005-01-01

This paper describes the installation of the new JET Shape Controller System [M. Garribba, R. Litunovsky, P. Noll, S. Puppin, The new control scheme for the JET plasma position and current control system, in: Proceedings of the 15th SOFE Conference, Massachusetts, 1993, pp. 33-36; F. Sartori, A. Cenedese, Plasma position and current control management at JET, in: Proceedings of the 42nd IEEE Conference on Decision and Control, Maui, 2003] especially focusing on the addition of the Extreme Shape Controller [G. Ambrosino, et al., A new shape controller for extremely shaped plasmas in JET, Fusion Eng. Des. 66-68 (2003) 797-802]. The activity was performed by the JET Operator in co-operation with the ENEA-CREATE design team, and involved both changes in the hardware and system software of JET and tuning of the proposed Extreme Shape Controller (XSC) design to satisfy the practical requirements of tokamak operation. The application of 10 years experience of controller implementation and commissioning combined with a modern and efficient modelling and design methodology has allowed an unprecedented fast and easy commissioning of the new system

Active Fault Tolerant Control of Livestock Stable Ventilation System

DEFF Research Database (Denmark)

Gholami, Mehdi

2011-01-01

Modern stables and greenhouses are equipped with different components for providing a comfortable climate for animals and plant. A component malfunction may result in loss of production. Therefore, it is desirable to design a control system, which is stable, and is able to provide an acceptable d...... are not included, while due to the physical limitation, the input signal can not have any value. In continuing, a passive fault tolerant controller (PFTC) based on state feedback is proposed to track a reference signal while the control inputs are bounded....... of fault. Designing a fault tolerant control scheme for the climate control system. In the first step, a conceptual multi-zone model for climate control of a live-stock building is derived. The model is a nonlinear hybrid model. Hybrid systems contain both discrete and continuous components. The parameters...... affine (PWA) components such as dead-zones, saturation, etc or contain piecewise nonlinear models which is the case for the climate control systems of the stables. Fault tolerant controller (FTC) is based on a switching scheme between a set of predefined passive fault tolerant controller (PFTC...

From control switches to integrated process control systems. 60 years of power plant control technology; Vom Steuerquittierschalter zum integrierten Prozessleitsystem. 60 Jahre Kraftwerksleittechnik

Energy Technology Data Exchange (ETDEWEB)

Pagel, Peter [ABB AG, Mannheim (Germany). Marketing

2009-07-01

Power plant control has always been based on the process requirements and on the need to reduce the process cost. Modern power plant control systems also take account of the need for emission reduction. They have developed into integrated navigation platforms with functional confectioning of workstations, focusing on the aspects of functionality, efficiency, ergonomics, plant availability and life cycle cost. The contribution outlines important developments of power plant control technology during the past few decades. (orig.)

It's Indisputable: Five Facts About Planning and Operating Modern Power Systems

Energy Technology Data Exchange (ETDEWEB)

Bloom, Aaron; Helman, Udi; Holttinen, Hannele; Summers, Kate; Bakke, Jordan; Brinkman, Gregory; Lopez, Anthony

2017-11-01

An indisputable fact cannot be rebutted. It is supported by theory and experience. Over the past 25 years, wind and solar generation has undergone dramatic growth, resulting in a variety of experiences that model the integration of wind and solar into the planning and operation of modern electric power systems. In this article, we bring together examples from Europe, North America, and Australia to identify five indisputable facts about planning and operating modern power systems. Taken together, we hope these experiences can help build consensus among the engineering and public policy communities about the current state of wind and solar integration and also facilitate conversations about evolving future challenges.

Evolutionary Computing for Intelligent Power System Optimization and Control

DEFF Research Database (Denmark)

This new book focuses on how evolutionary computing techniques benefit engineering research and development tasks by converting practical problems of growing complexities into simple formulations, thus largely reducing development efforts. This book begins with an overview of the optimization the...... theory and modern evolutionary computing techniques, and goes on to cover specific applications of evolutionary computing to power system optimization and control problems....

Advances in control system technology for aerospace applications

CERN Document Server

2016-01-01

This book is devoted to Control System Technology applied to aerospace and covers the four disciplines Cognitive Engineering, Computer Science, Operations Research, and Servo-Mechanisms. This edited book follows a workshop held at the Georgia Institute of Technology in June 2012, where the today's most important aerospace challenges, including aerospace autonomy, safety-critical embedded software engineering, and modern air transportation were discussed over the course of two days of intense interactions among leading aerospace engineers and scientists. Its content provide a snapshot of today's aerospace control research and its future, including Autonomy in space applications, Control in space applications, Autonomy in aeronautical applications, Air transportation, and Safety-critical software engineering.

Modern system architectures in embedded systems

International Nuclear Information System (INIS)

Korhonen, T.

2012-01-01

Several new technologies are making their way also in embedded systems. In addition to the FPGA technology which has become commonplace, multi-core CPUs and I/O virtualization (the implementation of the tasks of a software hyper-visor in hardware to improve the efficiency) are being introduced to the embedded systems. In this paper we review the trends and discuss how to take advantage of these features in control systems. Some potential application examples like parallelization, data streaming, high-speed data acquisition and virtualization are discussed

Determination of characteristics of feromagnetic material using modern data acquisition system

Directory of Open Access Journals (Sweden)

Koprivica Branko

2009-01-01

Full Text Available This paper describes the use of modern measuring and data acquisition system for determining characteristics of feromagnetic material. For this purpose data acquisition card NI USB-6009, PC with data acquisition software and fluxmeter Electrical Steel Measuring System MPG 100 D were used. Based on the results obtained by measurements the modeling of hysteresis loop is performed by using appropriate mathematical model.

The effects of emission control strategies on light-absorbing carbon emissions from a modern heavy-duty diesel engine.

Science.gov (United States)

Robinson, Michael A; Olson, Michael R; Liu, Z Gerald; Schauer, James J

2015-06-01

Control of atmospheric black carbon (BC) and brown carbon (BrC) has been proposed as an important pathway to climate change mitigation, but sources of BC and BrC are still not well understood. In order to better identify the role of modern heavy-duty diesel engines on the production of BC and BrC, emissions from a heavy-duty diesel engine operating with different emission control strategies were examined using a source dilution sampling system. The effect of a diesel oxidation catalyst (DOC) and diesel particulate filter (DPF) on light-absorbing carbon (LAC) was evaluated at three steady-state engine operation modes: idle, 50% speed and load, and 100% speed and load. LAC was measured with four different engine configurations: engine out, DOC out, DPF out, and engine out with an altered combustion calibration. BC and BrC emission rates were measured with the Aethalometer (AE-31). EC and BC emission rates normalized to the mass of CO₂emitted increased with increasing engine speed and load. Emission rates normalized to brake-specific work did not exhibit similar trends with speed and load, but rather the highest emission rate was measured at idle. EC and OC emissions were reduced by 99% when the DOC and DPF architecture was applied. The application of a DPF was equally effective at removing 99% of the BC fraction of PM, proving to be an important control strategy for both LAC and PM. BC emissions were unexpectedly increased across the DOC, seemingly due to a change aerosol optical properties. Removal of exhaust gas recirculation (EGR) flow due to simulated EGR cooler failure caused a large increase in OC and BrC emission rates at idle, but had limited influence during high load operation. LAC emissions proved to be sensitive to the same control strategies effective at controlling the total mass of diesel PM. In the context of black carbon emissions, very small emission rates of brown carbon were measured over a range of control technologies and engine operating

A graphical user-interface control system at SRRC

International Nuclear Information System (INIS)

Chen, J.S.; Wang, C.J.; Chen, S.J.; Jan, G.J.

1993-01-01

A graphical user interface control system of 1.3 GeV synchrotron radiation light source was designed and implemented for the beam transport line (BTL) and storage ring (SR). A modern control technique has been used to implement and control the third generation synchrotron light source. Two level computer hardware configuration, that includes process and console computers as a top level and VME based intelligent local controller as a bottom level, was setup and tested. Both level computers are linked by high speed Ethernet data communication network. A database includes static and dynamic databases as well as access routines were developed. In order to commission and operate the machine friendly, the graphical man machine interface was designed and coded. The graphical user interface (GUI) software was installed on VAX workstations for the BTL and SR at the Synchrotron Radiation Research Center (SRRC). The over all performance has been evaluated at 10Hz update rate. The results showed that the graphical operator interface control system is versatile system and can be implemented into the control system of the accelerator. It will provide the tool to control and monitor the equipments of the radiation light source especially for machine commissioning and operation

Future Direction of the Instrumentation and Control System for Security of Nuclear Facilities

International Nuclear Information System (INIS)

Kim, Woo Jin; Kim, Jae Kwang

2014-01-01

Instrumentation and control systems are pervasively used as a vital component in modern industries. Nuclear facilities, such as nuclear power plants (NPPs), originally use I and C systems for plant status monitoring, processes control, and many other purposes. After some events that raised security concerns, application areas of I and C systems have been expanded to physical protection of nuclear material and facilities. As nuclear policies over the world are strengthening security issues, the future direction of roles and technical requirements of security related I and C systems is described: An introduction of I and C systems, especially digitalized I and C systems, to security of nuclear facilities requires many careful considerations, such as system integration, verification and validation (V/V), etc. Institute of Nuclear Nonproliferation and Control (KINAC) established 'International Nuclear Nonproliferation and Security Academy, INSA' in 2014. One of the main achievements of INSA is test-bed implementation for technical criteria development of nuclear facilities' physical protection systems (PPSs) as well as for education and training of those systems. The test bed was modified and improved more suitably from the previous version to modern PPSs including state-of-the-art I and C technologies. KINAC is confident in the new test bed to become a fundamental technical basis of security related I and C systems in near future

Robust multi-model predictive control of multi-zone thermal plate system

Directory of Open Access Journals (Sweden)

Poom Jatunitanon

2018-02-01

Full Text Available A modern controller was designed by using the mathematical model of a multi–zone thermal plate system. An important requirement for this type of controller is that it must be able to keep the temperature set-point of each thermal zone. The mathematical model used in the design was determined through a system identification process. The results showed that when the operating condition is changed, the performance of the controller may be reduced as a result of the system parameter uncertainties. This paper proposes a weighting technique of combining the robust model predictive controller for each operating condition into a single robust multi-model predictive control. Simulation and experimental results showed that the proposed method performed better than the conventional multi-model predictive control in rise time of transient response, when used in a system designed to work over a wide range of operating conditions.

Determinants of modern family planning use among women of reproductive age in the Nkwanta district of Ghana: a case–control study

Science.gov (United States)

2014-01-01

Background Average contraceptive prevalence rate in the Nkwanta district of Ghana was estimated to be 6.2% relative to the national average at the time, of 19%. While several efforts had been made to improve family planning in the country, the district still had very low use of modern family planning methods. This study sought to determine the factors that influenced modern family planning use in general and specifically, the factors that determined the consistently low use of modern family planning methods in the district. Methods A case–control study was conducted in the Nkwanta district of Ghana to determine socio-economic, socio-cultural and service delivery factors influencing family planning usage. One hundred and thirty cases and 260 controls made up of women aged 15–49 years were interviewed using structured questionnaires. A logistic regression was fitted. Results Awareness and knowledge of modern family planning methods were high among cases and controls (over 90%). Lack of formal education among women, socio-cultural beliefs and spousal communication were found to influence modern family planning use. Furthermore, favourable opening hours of the facilities and distance to health facilities influenced the use of modern contraceptives. Conclusion While modern family planning seemed to be common knowledge among these women, actual use of such contraceptives was limited. There is need to improve use of modern family planning methods in the district. In addition to providing health facilities and consolidating close-to-client service initiatives in the district, policies directed towards improving modern family planning method use need to consider the influence of formal education. Promoting basic education, especially among females, will be a crucial step as the district is faced with high levels of school dropout and illiteracy rates. PMID:25117887

Control of multi-evaporator air-conditioning systems for flow distribution

International Nuclear Information System (INIS)

Lin, J.-L.; Yeh, T.-J.

2009-01-01

Modern air-conditioners incorporate variable-speed compressors and variable-opening expansion valves as the actuators for improving cooling performance and energy efficiency. These actuators have to be properly feedback-controlled; otherwise the systems may exhibit even poorer performance than the conventional machines which use fixed-speed compressors and mechanical expansion valves. In this paper, a control strategy with flow distribution capability is proposed for multi-evaporator air-conditioners to accommodate different thermal demands in different rooms. The structure in the control strategy is based on a low-order, linear model obtained from system identification. To determine appropriate control parameters, theorems regarding stability of the closed-loop system are given. Moreover, by performing steady-state analysis on the control system and utilizing characteristics of the identified system parameters, one can analytically explain the mechanics of flow distribution. Experiments indicate that the proposed strategy can successfully regulate the indoor temperatures regardless that the reference settings for respective rooms are different and the settings are switched in the middle of the control process.

Modernization of the physical protection system of IPEN-CNEN/SP

International Nuclear Information System (INIS)

Suzuki, F.F.

2001-01-01

Full text: The plans of physical protection of nuclear facilities must be reviewed and updated every two years. A general study of the physical protection system was carried out in order to review and to update the plan of physical protection of IPEN-CNEN/SP. Important alterations accomplished at the institute were considered in the study, as the installation of a cyclotron 30 MeV and the new operation conditions for the nuclear research reactor IEA-RI, that include the increase of its operation power from two to five megawatts and the establishment of the continuous operation by 72 hours weekly. The area of IPEN-CNEN/SP is 478,000 m 2 (101,850 m 2 built area of 107 constructions). The group responsible for the study investigated the performance of the physical protection system and detected some points that could be reinforced at inner and protected areas. The initial step was the evaluation, in loco, of the constructions and physical barriers of inner and protected areas. The performance of the security force personnel on the conventional procedures, as access control to the facilities, control of material flow, area monitoring and patrol, as well as its response for special situation procedures in the case of a physical protection emergency, were evaluated too. The study also focused the communication means used by the security force, as the extension phone lines that are located in each entrance area and in the huts, and the portable VHP radios that are used by the guards. In order to elaborate a programme of modernization of the physical protection system, using the results of the study as basis, an internal committee composed of specialists in physical protection, nuclear safety, operation of reactors and engineering areas was created. The programme elaborated by the committee strengthens the physical protection system by applying the defense in depth concept. At the same time, it attempts to propitiate a balanced protection to minimize the consequences for

Semiconductor-machine system for controlling excitation of synchronous medium power generators

Energy Technology Data Exchange (ETDEWEB)

Vrtikapa, G

1982-01-01

A system for controlling excitation (ARP-29/1) is described which was developed at the ''Nikola Tesla'' institute (Czechoslavakia) for rebuilding the Zvornik hydroelectric plant with 30 MV X A units. The system corresponds to the modern level of automation and considers positive characteristics of existing equipment, it is easily included in a technological process, has small dimensions and is easily installed during overhaul of a electric generating plant, and it allows one to obtain good economic results. Two years of use have confirmed the high reliability and quality of the excitation. The excitation control system consists of synchronous motor, excitation system, automatic control of voltage, manual control of excitation unit, unit for automatic following and switching, relay automatic device with protection and warning. The excitation system of the generator has: thyristor rectifier, thyristor converter, a bridge with thyristor control unit, machine excitation generator, switch for demagnetization. The excitation system is supplied from an electric power network or from a three phase generator with permanent magnets.

ANALYSIS OF MODERN ELEVATOR DESIGNS AND TENDENCIES OF THEIR DEVELOPMENT

Directory of Open Access Journals (Sweden)

A. I. Antonevich

2010-01-01

Full Text Available An analysis of modern elevator designs and control systems, their classification and characteristics are given in the paper. Tendencies and prospects of their development are revealed on the basis of the executed analysis.

Analysis and upgrade of instrumentation and control systems for the modernization of research reactors

International Nuclear Information System (INIS)

1988-01-01

This document provides assistance in the review and planning process for the upgrade of instrumentation and control systems (I and C systems) and related safety features of the reactor protection system for research reactors. In the interest of safety a need was realized to evaluate the performance of outdated I and C systems. An advisory group was assembled to develop guidelines and to provide recommendations for the upgrade of I and C systems. The recommendations on I and C systems upgrade contained in this document were developed by the advisory group using as guidelines the established safety criteria and operating standards for research reactors. 24 refs

HYBRID ALARM SYSTEMS: COMBINING SPATIAL ALARMS AND ALARM LISTS FOR OPTIMIZED CONTROL ROOM OPERATION

Energy Technology Data Exchange (ETDEWEB)

Ronald L. Boring; J.J. Persensky

2012-07-01

The US Department of Energy (DOE) is sponsoring research, development, and deployment on Light Water Reactor Sustainability (LWRS), in which the Idaho National Laboratory (INL) is working closely with nuclear utilities to develop technologies and solutions to help ensure the safe operational life extension of current nuclear power plants. One of the main areas of focus is control room modernization. Within control room modernization, alarm system upgrades present opportunities to meet the broader goals of the LWRS project in demonstrating the use and safety of the advanced instrumentation and control (I&C) technologies and the short-term and longer term objectives of the plant. In this paper, we review approaches for and human factors issues behind upgrading alarms in the main control room of nuclear power plants.

Architecture of built-in microcontrollers in the U-70 complex control system

International Nuclear Information System (INIS)

Balakin, S.I.; Voevodin, V.P.; Inchagov, A.A.; Komarov, V.V.

2000-01-01

The distributed system of built-in microcontrollers (BMS) for functional control of supply sources of magnetooptical elements is created within the frames of works on modernization of the U-70 control complex. The BMS architecture and functional diagram of one of them are presented. The microcontrollers operation algorithm is based on the eventuation principle. The BMS basic parameters are presented [ru

Universal control and measuring system for modern classic and amorphous magnetic materials single/on-line strip testers

Science.gov (United States)

Zemánek, Ivan; Havlíček, Václav

2006-09-01

A new universal control and measuring system for classic and amorphous soft magnetic materials single/on-line strip testing has been developed at the Czech Technical University in Prague. The measuring system allows to measure magnetization characteristic and specific power losses of different tested materials (strips) at AC magnetization of arbitrary magnetic flux density waveform at wide range of frequencies 20 Hz-20 kHz. The measuring system can be used for both single strip testing in laboratories and on-line strip testing during the production process. The measuring system is controlled by two-stage master-slave control system consisting of the external PC (master) completed by three special A/D measuring plug-in boards, and local executing control unit (slave) with one-chip microprocessor 8051, connected with PC by the RS232 serial line. The "user friendly" powerful control software implemented on the PC and the effective program code for the microprocessor give possibility for full automatic measurement with high measuring power and high measuring accuracy.

Architecture of WEST plasma control system

International Nuclear Information System (INIS)

Ravenel, N.; Nouailletas, R.; Barana, O.; Brémond, S.; Moreau, P.; Guillerminet, B.; Balme, S.; Allegretti, L.; Mannori, S.

2014-01-01

To operate advanced plasma scenario (long pulse with high stored energy) in present and future tokamak devices under safe operation conditions, the control requirements of the plasma control system (PCS) leads to the development of advanced feedback control and real time handling exceptions. To develop these controllers and these exceptions handling strategies, a project aiming at setting up a flight simulator has started at CEA in 2009. Now, the new WEST (W Environment in Steady-state Tokamak) project deals with modifying Tore Supra into an ITER-like divertor tokamak. This upgrade impacts a lot of systems including Tore Supra PCS and is the opportunity to improve the current PCS architecture to implement the previous works and to fulfill the needs of modern tokamak operation. This paper is dealing with the description of the architecture of WEST PCS. Firstly, the requirements will be presented including the needs of new concepts (segments configuration, alternative (or backup) scenario, …). Then, the conceptual design of the PCS will be described including the main components and their functions. The third part will be dedicated to the proposal RT framework and to the technologies that we have to implement to reach the requirements

Physical Education between the social project of solid modernity and the of liquid modernity

Directory of Open Access Journals (Sweden)

Sidinei Pithan da Silva

2012-09-01

Full Text Available Grounded on Bauman’s thought, the present paper focuses on the constitution of social legitimacy and identity of Physical Education in the context of transition from solid to liquid modernity. This thought favors the understanding of the nature of the crisis that has crossed the identity discourse of Physical Education. The text signals the limits and possibilities of both the modern and the post-modern educational discourses. In this context, it describes a modern scenario that is marked by two distinct moments, the one of modernity at its solid stage, and that of modernity at its liquid stage. The first one, of solid modernity, social condition of surveillance, rationalization and control, performs the functional / adaptive role of putting everyone under the same rigid order (managed society. The second one, of liquid modernity, of the social condition of insignificance and irrationalism, plays the functional role of putting and keeping everyone under the same flexible Market disorder. From the scientific, mechanic focus of both the body and the physical education in solid modernity we have moved to the relativist and esthetic focus of body and physical education in liquid modernity.

Design of cylindrical pipe automatic welding control system based on STM32

Science.gov (United States)

Chen, Shuaishuai; Shen, Weicong

2018-04-01

The development of modern economy makes the demand for pipeline construction and construction rapidly increasing, and the pipeline welding has become an important link in pipeline construction. At present, there are still a large number of using of manual welding methods at home and abroad, and field pipe welding especially lacks miniature and portable automatic welding equipment. An automated welding system consists of a control system, which consisting of a lower computer control panel and a host computer operating interface, as well as automatic welding machine mechanisms and welding power systems in coordination with the control system. In this paper, a new control system of automatic pipe welding based on the control panel of the lower computer and the interface of the host computer is proposed, which has many advantages over the traditional automatic welding machine.

System 80+ instrumentation and controls - certification of a reliable design

International Nuclear Information System (INIS)

Matzie, R.A.; Scarola, K.; Turk, R.S.

1993-01-01

ABB Combustion Engineering's (ABB) System 80+ advanced light water plant design includes a modern, fully digitized instrumentation and controls complex, Nuplex 80+. This complex incorporates an evolutionary advanced control room, replacing conventional analog instruments with more capable computer driven components. As a result, Nuplex 80+ results in significant improvements in operator information handling and control to enhance plant safety and availability. The design implements features which the U.S. NRC has determined to be acceptable for addressing the potential for common mode failure in software implemented for protective functions. (author)

Modern teaching for modern education

OpenAIRE

Mirascieva, Snezana

2016-01-01

Carrying the epithet of being contemporary education today means modern teaching. If modern education is a state in the field of education of all its elements, then teaching will also be a state with its own special features defining it as modern. The main issues of concern in this paper relate to what constitutes modern teaching, which features determine it as being modern, and how much is teaching today following the trend of modernization.

A comparison of soil organic carbon stock in ancient and modern land use systems in Denmark

DEFF Research Database (Denmark)

Breuning-Madsen, Henrik; Elberling, Bo; Balstrøm, Thomas

2009-01-01

. A comparison of the organic matter content in these mound cores and the plough layer in modern farmland offers an opportunity to compare the soil organic carbon (SOC) stocks in ancient and modern land use systems and to evaluate the long-term trends in carbon (C) sequestration in relation to modern farmland......During the South Scandinavian Early Bronze Age about 3300 years ago, thousands of burial mounds were constructed of sods from fallow ground used for grazing in Denmark and northern Germany. In some of these mounds a wet, anaerobic core developed, preventing the decomposition of organic matter...... with varying inputs of manure and inorganic fertilizers. In the present paper we compare SOC stocks based on integrated horizon-specific densities and SOC contents in three 3300-year-old buried farmland soils, representing the land use system at that time, with results from soil surveys representing modern...

Post-communism: postmodernity or modernity revisited?

Science.gov (United States)

Ray, L

1997-12-01

Coinciding with the popularity of postmodern theory, the fall of communism appeared to offer further evidence of the exhaustion of modernity. Such analysis is grounded in a view that the Soviet system was the epitome of modernity. An alternative approach regards post-communism as opening new terrains of struggle for modernity. Thus Habermas and others suggest that post-communist societies are rejoining the trajectory of western modernity whose problems they now recapitulate. This alternative view implies that Soviet systems were something other than 'modern', although their nature is not always clearly defined. However, even if post-communist societies do encounter problems of modernity, they do so in new circumstances where modernist notions of social development have become problematic. This article argues that, contrary to those who regard modernization or postmodernization as irresistible trends, core post-communist societies are likely to develop along an alternative path to that of western modernity. This is tentatively described as 'neo-mercantilist'.

Requirements for Control Room Computer-Based Procedures for use in Hybrid Control Rooms

Energy Technology Data Exchange (ETDEWEB)

Le Blanc, Katya Lee [Idaho National Lab. (INL), Idaho Falls, ID (United States); Oxstrand, Johanna Helene [Idaho National Lab. (INL), Idaho Falls, ID (United States); Joe, Jeffrey Clark [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-05-01

Many plants in the U.S. are currently undergoing control room modernization. The main drivers for modernization are the aging and obsolescence of existing equipment, which typically results in a like-for-like replacement of analogue equipment with digital systems. However, the modernization efforts present an opportunity to employ advanced technology that would not only extend the life, but enhance the efficiency and cost competitiveness of nuclear power. Computer-based procedures (CBPs) are one example of near-term advanced technology that may provide enhanced efficiencies above and beyond like for like replacements of analog systems. Researchers in the LWRS program are investigating the benefits of advanced technologies such as CBPs, with the goal of assisting utilities in decision making during modernization projects. This report will describe the existing research on CBPs, discuss the unique issues related to using CBPs in hybrid control rooms (i.e., partially modernized analog control rooms), and define the requirements of CBPs for hybrid control rooms.

Anthropometric Considerations in the Modernized Main Control Room: Application to a Virtual Nuclear Power Plant Control Panel

International Nuclear Information System (INIS)

Yang, Chih Wei; Cheng, Tsung Chieh; Lin, Chiuhsiang Joe

2011-01-01

This study investigates the anthropometric considerations in the main control room (MCR) application to a virtual nuclear power plant (NPP) control panel. Influences of working postures and physical demands on the operational performance are also discussed. Finally, the present research provides a case example to illustrate the influences of anthropometric considerations on the control panel design for MCR operators by applying virtual reality (VR) technology. The MCR design primarily evolved in different countries. The datasets available is usually insufficient or inconsistent for the end users. To solve the upper mentioned problem, this study put emphasis on applying VR technology to anthropometric considerations support control panel design in the modernized MCR. Although the concept of applying VR technology on anthropometric considerations in this paper is related to the MCR in NPPs, it could be easily applied for the purposes of any type of control room in a similar manner

Anthropometric Considerations in the Modernized Main Control Room: Application to a Virtual Nuclear Power Plant Control Panel

Energy Technology Data Exchange (ETDEWEB)

Yang, Chih Wei; Cheng, Tsung Chieh [Institute of Nuclear Energy Research, Taoyuan (China); Lin, Chiuhsiang Joe [Chung-Yuan Christian University, Chung Li (China)

2011-08-15

This study investigates the anthropometric considerations in the main control room (MCR) application to a virtual nuclear power plant (NPP) control panel. Influences of working postures and physical demands on the operational performance are also discussed. Finally, the present research provides a case example to illustrate the influences of anthropometric considerations on the control panel design for MCR operators by applying virtual reality (VR) technology. The MCR design primarily evolved in different countries. The datasets available is usually insufficient or inconsistent for the end users. To solve the upper mentioned problem, this study put emphasis on applying VR technology to anthropometric considerations support control panel design in the modernized MCR. Although the concept of applying VR technology on anthropometric considerations in this paper is related to the MCR in NPPs, it could be easily applied for the purposes of any type of control room in a similar manner.

The Resource Structure of the Potential of Economic Development and Growth of Wealth of the Modern Macroeconomic Systems

Directory of Open Access Journals (Sweden)

Silantiev Oleh I.

2018-03-01

Full Text Available The publication is aimed at researching the features of formation and structure of economic potential of the economic development of modern macroeconomic systems. The research used the structural-functional, systemic, integral and logical approaches together with the methods of analysis and synthesis, induction and deduction. A formalization of the resource structure of the potential of economic development of modern macroeconomic systems with allocation of defining (mandatory kinds of resources (wealth and clarification of their (its specifics in the concrete historical conditions of society’s living was carried out. The bases of identification of essence and structure of the economic potential of development of the modern macroeconomic systems are clarified by its kinds. The factors of strategic influence on the process of formation of the economic development potential of the modern macroeconomic systems were researched. The value of the carried out research is the improved theoretical approaches to understanding the essence and structure of both the economic potential and the economic development potential of macroeconomic systems. Prospects for further research are the in-depth analysis of the individual components of the resource structure of the economic development potential of macroeconomic systems, especially the imperative types of wealth.

Influence of Wind Plant Ancillary Frequency Control on System Small Signal Stability

DEFF Research Database (Denmark)

Su, Chi; Chen, Zhe

2012-01-01

Since large-scale wind farms are increasingly connected to modern power grids, the transmission system operators put more requirements as part of the grid codes on the integration of wind farms. System frequency control which is normally provided by conventional synchronous generators becomes a c...... ratio values of the dominant oscillation modes within the connected power system. All the calculations and simulations are conducted in DIgSILENT PowerFactory 14.0....

Design of Launch Vehicle Flight Control Systems Using Ascent Vehicle Stability Analysis Tool

Science.gov (United States)

Jang, Jiann-Woei; Alaniz, Abran; Hall, Robert; Bedossian, Nazareth; Hall, Charles; Jackson, Mark

2011-01-01

A launch vehicle represents a complicated flex-body structural environment for flight control system design. The Ascent-vehicle Stability Analysis Tool (ASAT) is developed to address the complicity in design and analysis of a launch vehicle. The design objective for the flight control system of a launch vehicle is to best follow guidance commands while robustly maintaining system stability. A constrained optimization approach takes the advantage of modern computational control techniques to simultaneously design multiple control systems in compliance with required design specs. "Tower Clearance" and "Load Relief" designs have been achieved for liftoff and max dynamic pressure flight regions, respectively, in the presence of large wind disturbances. The robustness of the flight control system designs has been verified in the frequency domain Monte Carlo analysis using ASAT.