WorldWideScience

Sample records for control requirement definition

  1. Definition of areas requiring criticality alarm annunciation and emergency control

    International Nuclear Information System (INIS)

    Hobson, J.M.

    1988-01-01

    The design of fissile material handling at British Nuclear Fuels plc requires the provision of a criticality incident detection system unless a specific case for omission can be formally made. Where such systems are provided, the 100 mSv contour resulting from a reference criticality incident must be restricted to an area of administrative control within which it is reasonably practicable to provide alarm annunciation and for which emergency arrangements can be defined. For typical reprocessing plant applications, the definition of these areas, and their restriction by provision of shielding where necessary, potentially requires a very large number of three dimensional neutron transport calculations in complex geometries. However, by considering the requirements and nature of this assessment, simple generic methods have been developed and justified. Consequently, rapid and inexpensive assessments of control areas can be carried out

  2. Monitoring and control requirement definition study for Dispersed Storage and Generation (DSG). Volume 2, appendix A: Selected DSG technologies and their general control requirements

    Science.gov (United States)

    1980-01-01

    A consistent approach was sought for both hardware and software which will handle the monitoring and control necessary to integrate a number of different DSG technologies into a common distribution dispatch network. It appears that the control of each of the DSG technologies is compatible with a supervisory control method of operation that lends itself to remote control from a distribution dispatch center.

  3. Nuclear chemistry counting facilities: requirements definition

    International Nuclear Information System (INIS)

    O'Brien, D.W.; Baker, J.

    1979-01-01

    In an effort to upgrade outdated instrumentation and to take advantage of current and imminent technologies the Nuclear Chemistry Division at Lawrence Livermore Laboratory is about to undertake a major upgrade of their low level radiation counting and analysis facilities. It is expected that such a project will make a more coordinated data acquisition and data processing system, reduce manual data handling operations and speed up data processing throughput. Before taking on a systems design it is appropriate to establish a definition of the requirements of the facilities. This report examines why such a project is necessary in the context of the current and projected operations, needs, problems, risks and costs. The authors also address a functional specification as a prelude to a system design and the design constraints implicit in the systems implementation. Technical, operational and economic assessments establish necessary boundary conditions for this discussion. This report also establishes the environment in which the requirements definition may be considered valid. The validity of these analyses is contingent on known and projected technical, scientific and political conditions

  4. Energy Efficient Engine: Control system preliminary definition report

    Science.gov (United States)

    Howe, David C.

    1986-01-01

    The object of the Control Preliminary Definition Program was to define a preliminary control system concept as a part of the Energy Efficient Engine program. The program was limited to a conceptual definition of a full authority digital electronic control system. System requirements were determined and a control system was conceptually defined to these requirements. Areas requiring technological development were identified and a plan was established for implementing the identified technological features, including a control technology demonstration. A significant element of this program was a study of the potential benefits of closed-loop active clearance control, along with laboratory tests of candidate clearance sensor elements for a closed loop system.

  5. Architectural conceptual definition of the CAREM-25 reactor's control system

    International Nuclear Information System (INIS)

    Perez, J.C.; Santome, D.; Drexler, J.; Escudero, S.

    1990-01-01

    This work presents the conceptual definition of the CAREM 25 reactor's digital and monitoring control system structure. The requirements of the system are analyzed and different implementation alternatives are studied where possible basic architectures of the system and its topology are considered and evaluated. (Author) [es

  6. 76 FR 19980 - Funding Priorities, Requirements, and Definitions

    Science.gov (United States)

    2011-04-11

    ... use the priorities, requirements, and definitions to awards grants to State educational agencies (SEAs... Education, and Bureau of Justice Statistics, Office of Justice Programs, U.S. Department of Justice... educational agencies (LEAs), and schools to create safe, healthy, and supportive learning environments...

  7. Key requirements for future control room functionality

    DEFF Research Database (Denmark)

    Tornelli, Carlo; Zuelli, Roberto; Marinelli, Mattia

    2016-01-01

    ) and the observability needs highlighted within WP5 led to the definition of the requirements with a Web of Cell (WoC) point of view. The main European Distribution System Operators (DSOs) provided a valuable contribution in the definition of the evolvDSO Use Cases. Their analysis lead to the definition of further...

  8. 685. Order amending the Order concerning the definition of goods whose export requires a permit in accordance with the Security Control Act

    International Nuclear Information System (INIS)

    1990-01-01

    The list of goods which may not be exported without a permit, in accordance with the Act of 1972 on security control, was amended by this Order. The amendment includes numerous items or equipment involving radiation or radioactive materials. It came into effect on 1 December 1990. (NEA)

  9. SRS control system upgrade requirements

    International Nuclear Information System (INIS)

    Hill, L.F.

    1998-01-01

    This document defines requirements for an upgrade of the Sodium Removal System (SRS) control system. The upgrade is being performed to solve a number of maintainability and operability issues. The upgraded system will provide the same functions, controls and interlocks as the present system, and in addition provide enhanced functionality in areas discussed in this document

  10. 75 FR 9953 - Definition and Requirements for a Nationally Recognized Testing Laboratory (NRTL); Extension of...

    Science.gov (United States)

    2010-03-04

    ...] Definition and Requirements for a Nationally Recognized Testing Laboratory (NRTL); Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements AGENCY... its Regulation on the Definition and Requirements for a Nationally Recognized Testing Laboratory (29...

  11. Training Manual for Elements of Interface Definition and Control

    Science.gov (United States)

    Lalli, Vincent R. (Editor); Kastner, Robert E. (Editor); Hartt, Henry N. (Editor)

    1997-01-01

    The primary thrust of this manual is to ensure that the format and information needed to control interfaces between equipment are clear and understandable. The emphasis is on controlling the engineering design of the interface and not on the functional performance requirements of the system or the internal workings of the interfacing equipment. Interface control should take place, with rare exception, at the interfacing elements and no further. There are two essential sections of the manual. Chapter 2, Principles of Interface Control, discusses how interfaces are defined. It describes different types of interfaces to be considered and recommends a format for the documentation necessary for adequate interface control. Chapter 3, The Process: Through the Design Phases, provides tailored guidance for interface definition and control. This manual can be used to improve planned or existing interface control processes during system design and development. It can also be used to refresh and update the corporate knowledge base. The information presented herein will reduce the amount of paper and data required in interface definition and control processes by as much as 50 percent and will shorten the time required to prepare an interface control document. It also highlights the essential technical parameters that ensure that flight subsystems will indeed fit together and function as intended after assembly and checkout.

  12. Task 4 supporting technology. Densification requirements definition and test objectives. Propellant densification requirements definition

    Science.gov (United States)

    Lak, Tibor; Weeks, D. P.

    1995-01-01

    The primary challenge of the X-33 CAN is to build and test a prototype LO2 and LH2 densification ground support equipment (GSE) unit, and perform tank thermodynamic testing within the 15 month phase 1 period. The LO2 and LH2 propellant densification system will be scaled for the IPTD LO2 and LH2 tank configurations. The IPTD tanks were selected for the propellant technology demonstration because of the potential benefits to the phase 1 plan: tanks will be built in time to support thermodynamic testing; minimum cost; minimum schedule risk; future testing at MSFC will build on phase 1 data base; and densification system will be available to support X-33 and RLV engine test at IPTD. The objective of the task 1 effort is to define the preliminary requirements of the propellant densification GSE and tank recirculation system. The key densification system design parameters to be established in Task 1 are: recirculation flow rate; heat exchanger inlet temperature; heat exchanger outlet temperature; maximum heat rejection rate; vent flow rate (GN2 and GH2); densification time; and tank pressure level.

  13. 78 FR 60898 - Regulation on Definition and Requirements for a Nationally Recognized Testing Laboratory...

    Science.gov (United States)

    2013-10-02

    ...] Regulation on Definition and Requirements for a Nationally Recognized Testing Laboratory; Revision of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements... collection requirements specified by its Regulation at 29 CFR 1910.7, ``definition and requirements for a...

  14. Seaway Information System Management and Control Requirements

    Science.gov (United States)

    1973-10-01

    This report examines in detail the control and information system requirements of the St. Lawrence Seaway development program in terms of the needs of the vessel traffic controllers and the management users. Structural control models of Seaway operat...

  15. 24 CFR 203.330 - Definition of delinquency and requirement for notice of delinquency to HUD.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Definition of delinquency and requirement for notice of delinquency to HUD. 203.330 Section 203.330 Housing and Urban Development... and Obligations Default Under Mortgage § 203.330 Definition of delinquency and requirement for notice...

  16. 24 CFR 203.466 - Definition of delinquency and requirement for notice of delinquency to HUD.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Definition of delinquency and requirement for notice of delinquency to HUD. 203.466 Section 203.466 Housing and Urban Development... and Obligations Rehabilitation Loans § 203.466 Definition of delinquency and requirement for notice of...

  17. [Definition and specification requirements for PAC-systems (picture archiving and communication system). A performance index with reference to the standard "IEEE Recommended Practice for Software Requirement Specifications"].

    Science.gov (United States)

    König, H; Klose, K J

    1999-04-01

    The formulation of requirements is necessary to control the goals of a PACS project. Furthermore, in this way, the scope of functionality necessary to support radiological working processes becomes clear. Definitions of requirements and specification are formulated independently of systems according to the IEEE standard "Recommended Practice for Software Requirements Specifications". Definitions are given in the Request for Information, specifications in the Request for Proposal. Functional and non-functional requirements are distinguished. The solutions are rated with respect to scope, appropriateness and quality of implementation. A PACS checklist was created according to the methods described above. It is published on the homepage of the "Arbeitsgemeinschaft Informationstechnologie" (AGIT) within the "Deutsche Röntgengesellschaft" (DRG) (http://www.uni-marburg.de/mzr/agit). The checklist provides a discussion forum which should contribute to an agreement on accepted basic PACS functionalities.

  18. 77 FR 5243 - Proposed Priority, Requirements, Definitions, and Selection Criteria-Arts in Education National...

    Science.gov (United States)

    2012-02-02

    ...-quality arts education and arts integration activities and services in music, dance, theater, media arts... DEPARTMENT OF EDUCATION Proposed Priority, Requirements, Definitions, and Selection Criteria--Arts in Education National Program (AENP) AGENCY: Office of Innovation and Improvement, Department of...

  19. LSC (X) Logistics Planning Support, Task 1 Requirements Definition

    National Research Council Canada - National Science Library

    Scalzo, John

    2004-01-01

    .... During the early stage after vessel delivery, there is a requirement to manage this plan through a transition period until the designated support manager is under contract and/or provided with the resources to execute the plan.

  20. Definition and specification for PACS. A checklist based on the standard ''IEEE Recommended Practice for Software Requirements Specifications''

    International Nuclear Information System (INIS)

    Koenig, H.; Klose, K.J.

    1999-01-01

    Problem: The formulation of requirements is necessary to control the goals of a PACS project. Furthermore, in this way, the scope of functionality necessary to support radiological working processes becomes clear. Method: Definitions of requirements and specification are formulated independently of systems according to the IEEE standard 'Recommended Practice for Software Requirements Specifications'. Definitions are given in the Request for Information, specifications in the Request for Proposal. Functional and non-functional requirements are distinguished. The solutions are rated with respect to scope, appropriateness and quality of implementation. Results: A PACS checklist was created according to the methods described above. It is published on the homepage of the 'Arbeitsgemeinschaft Informationstechnologie' (AGIT) within the 'Deutsche Roentgengesellschaft' (DRG) (http://www.uni-marburg.de/mzr.agit). Conclusion: The checklist provides a discussion forum which should contribute to an agreement on accepted basic PACS functionalities. (orig.) [de

  1. Space Tug avionics definition study. Volume 2: Avionics functional requirements

    Science.gov (United States)

    1975-01-01

    Flight and ground operational phases of the tug/shuttle system are analyzed to determine the general avionics support functions that are needed during each of the mission phases and sub-phases. Each of these general support functions is then expanded into specific avionics system requirements, which are then allocated to the appropriate avionics subsystems. This process is then repeated at the next lower level of detail where these subsystem requirements are allocated to each of the major components that comprise a subsystem.

  2. User oriented definition of product requirements within mechatronic engineering

    OpenAIRE

    Gerst, M.;Gierhardt, H.;Braun, T.

    2017-01-01

    In this paper the application of a modeling technique from software engineering to mechatronic engineering is presented. The Unified Modeling Language (UML) is used to model users´ needs and relate them to product requirements. Within a bus seat development project a Use Case Model and an Analyses Model were elaborated. Advantages and Disadvantages of the presented procedure are shown.

  3. Software requirements definition Shipping Cask Analysis System (SCANS)

    International Nuclear Information System (INIS)

    Johnson, G.L.; Serbin, R.

    1985-01-01

    The US Nuclear Regulatory Commission (NRC) staff reviews the technical adequacy of applications for certification of designs of shipping casks for spent nuclear fuel. In order to confirm an acceptable design, the NRC staff may perform independent calculations. The current NRC procedure for confirming cask design analyses is laborious and tedious. Most of the work is currently done by hand or through the use of a remote computer network. The time required to certify a cask can be long. The review process may vary somewhat with the engineer doing the reviewing. Similarly, the documentation on the results of the review can also vary with the reviewer. To increase the efficiency of this certification process, LLNL was requested to design and write an integrated set of user-oriented, interactive computer programs for a personal microcomputer. The system is known as the NRC Shipping Cask Analysis System (SCANS). The computer codes and the software system supporting these codes are being developed and maintained for the NRC by LLNL. The objective of this system is generally to lessen the time and effort needed to review an application. Additionally, an objective of the system is to assure standardized methods and documentation of the confirmatory analyses used in the review of these cask designs. A software system should be designed based on NRC-defined requirements contained in a requirements document. The requirements document is a statement of a project's wants and needs as the users and implementers jointly understand them. The requirements document states the desired end products (i.e. WHAT's) of the project, not HOW the project provides them. This document describes the wants and needs for the SCANS system. 1 fig., 3 tabs

  4. Tracing And Control Of Engineering Requirements

    Science.gov (United States)

    Turner, Philip R.; Stoller, Richard L.; Neville, Ted; Boyle, Karen A.

    1991-01-01

    TRACER (Tracing and Control of Engineering Requirements) is data-base/word-processing software system created to document and maintain order of both requirements and descriptions associated with engineering project. Implemented on IBM PC under PC-DOS. Written with CLIPPER.

  5. A methodology to describe process control requirements

    International Nuclear Information System (INIS)

    Carcagno, R.; Ganni, V.

    1994-01-01

    This paper presents a methodology to describe process control requirements for helium refrigeration plants. The SSC requires a greater level of automation for its refrigeration plants than is common in the cryogenics industry, and traditional methods (e.g., written descriptions) used to describe process control requirements are not sufficient. The methodology presented in this paper employs tabular and graphic representations in addition to written descriptions. The resulting document constitutes a tool for efficient communication among the different people involved in the design, development, operation, and maintenance of the control system. The methodology is not limited to helium refrigeration plants, and can be applied to any process with similar requirements. The paper includes examples

  6. An evaluation of HIV elite controller definitions within a large seroconverter cohort collaboration

    DEFF Research Database (Denmark)

    Olson, Ashley D; Meyer, Laurence; Prins, Maria

    2014-01-01

    ratios ranged from 12.5-19.0 for non-ECs compared to ECs). CONCLUSIONS: ECs are rare, less likely to progress to clinical disease, but may eventually lose control. We suggest definitions requiring individuals to have consecutive undetectable HIV-RNA measurements for ≥ six months or otherwise with >90......BACKGROUND: Understanding the mechanisms underlying viral control is highly relevant to vaccine studies and elite control (EC) of HIV infection. Although numerous definitions of EC exist, it is not clear which, if any, best identify this rare phenotype. METHODS: We assessed a number of EC...... definitions used in the literature using CASCADE data of 25,692 HIV seroconverters. We estimated proportions maintaining EC of total ART-naïve follow-up time, and disease progression, comparing to non-EC. We also examined HIV-RNA and CD4 values and CD4 slope during EC and beyond (while ART naïve). RESULTS...

  7. Manage changes in the requirements definition through a collaborative effort

    CSIR Research Space (South Africa)

    Joseph-Malherbe, S

    2009-08-01

    Full Text Available to the engineering effort. A history of changes made to the data repository should be kept throughout the SE process. The software development community refers to such a history of changes as version control. This will enable the systems engineer to generate a list... of changes at any point during the development process, showing the time of the change and by whom the change was introduced. By sharing the change history with stakeholders, they can see how the model evolved and what the rationale was for each change...

  8. TRACER - TRACING AND CONTROL OF ENGINEERING REQUIREMENTS

    Science.gov (United States)

    Turner, P. R.

    1994-01-01

    TRACER (Tracing and Control of Engineering Requirements) is a database/word processing system created to document and maintain the order of both requirements and descriptive material associated with an engineering project. A set of hierarchical documents are normally generated for a project whereby the requirements of the higher level documents levy requirements on the same level or lower level documents. Traditionally, the requirements are handled almost entirely by manual paper methods. The problem with a typical paper system, however, is that requirements written and changed continuously in different areas lead to misunderstandings and noncompliance. The purpose of TRACER is to automate the capture, tracing, reviewing, and managing of requirements for an engineering project. The engineering project still requires communications, negotiations, interactions, and iterations among people and organizations, but TRACER promotes succinct and precise identification and treatment of real requirements separate from the descriptive prose in a document. TRACER permits the documentation of an engineering project's requirements and progress in a logical, controllable, traceable manner. TRACER's attributes include the presentation of current requirements and status from any linked computer terminal and the ability to differentiate headers and descriptive material from the requirements. Related requirements can be linked and traced. The program also enables portions of documents to be printed, individual approval and release of requirements, and the tracing of requirements down into the equipment specification. Requirement "links" can be made "pending" and invisible to others until the pending link is made "binding". Individuals affected by linked requirements can be notified of significant changes with acknowledgement of the changes required. An unlimited number of documents can be created for a project and an ASCII import feature permits existing documents to be incorporated

  9. Satellite Power Systems (SPS) concept definition study. Volume 6: SPS technology requirements and verification

    Science.gov (United States)

    Hanley, G.

    1978-01-01

    Volume 6 of the SPS Concept Definition Study is presented and also incorporates results of NASA/MSFC in-house effort. This volume includes a supporting research and technology summary. Other volumes of the final report that provide additional detail are as follows: (1) Executive Summary; (2) SPS System Requirements; (3) SPS Concept Evolution; (4) SPS Point Design Definition; (5) Transportation and Operations Analysis; and Volume 7, SPS Program Plan and Economic Analysis.

  10. Frequency Control Performance Measurement and Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Illian, Howard F.

    2010-12-20

    Frequency control is an essential requirement of reliable electric power system operations. Determination of frequency control depends on frequency measurement and the practices based on these measurements that dictate acceptable frequency management. This report chronicles the evolution of these measurements and practices. As technology progresses from analog to digital for calculation, communication, and control, the technical basis for frequency control measurement and practices to determine acceptable performance continues to improve. Before the introduction of digital computing, practices were determined largely by prior experience. In anticipation of mandatory reliability rules, practices evolved from a focus primarily on commercial and equity issues to an increased focus on reliability. This evolution is expected to continue and place increased requirements for more precise measurements and a stronger scientific basis for future frequency management practices in support of reliability.

  11. Technical safety requirements control level verification

    International Nuclear Information System (INIS)

    STEWART, J.L.

    1999-01-01

    A Technical Safety Requirement (TSR) control level verification process was developed for the Tank Waste Remediation System (TWRS) TSRs at the Hanford Site in Richland, WA, at the direction of the US. Department of Energy, Richland Operations Office (RL). The objective of the effort was to develop a process to ensure that the TWRS TSR controls are designated and managed at the appropriate levels as Safety Limits (SLs), Limiting Control Settings (LCSs), Limiting Conditions for Operation (LCOs), Administrative Controls (ACs), or Design Features. The TSR control level verification process was developed and implemented by a team of contractor personnel with the participation of Fluor Daniel Hanford, Inc. (FDH), the Project Hanford Management Contract (PHMC) integrating contractor, and RL representatives. The team was composed of individuals with the following experience base: nuclear safety analysis; licensing; nuclear industry and DOE-complex TSR preparation/review experience; tank farm operations; FDH policy and compliance; and RL-TWRS oversight. Each TSR control level designation was completed utilizing TSR control logic diagrams and TSR criteria checklists based on DOE Orders, Standards, Contractor TSR policy, and other guidance. The control logic diagrams and criteria checklists were reviewed and modified by team members during team meetings. The TSR control level verification process was used to systematically evaluate 12 LCOs, 22 AC programs, and approximately 100 program key elements identified in the TWRS TSR document. The verification of each TSR control required a team consensus. Based on the results of the process, refinements were identified and the TWRS TSRs were modified as appropriate. A final report documenting key assumptions and the control level designation for each TSR control was prepared and is maintained on file for future reference. The results of the process were used as a reference in the RL review of the final TWRS TSRs and control suite. RL

  12. Technical safety requirements control level verification; TOPICAL

    International Nuclear Information System (INIS)

    STEWART, J.L.

    1999-01-01

    A Technical Safety Requirement (TSR) control level verification process was developed for the Tank Waste Remediation System (TWRS) TSRs at the Hanford Site in Richland, WA, at the direction of the US. Department of Energy, Richland Operations Office (RL). The objective of the effort was to develop a process to ensure that the TWRS TSR controls are designated and managed at the appropriate levels as Safety Limits (SLs), Limiting Control Settings (LCSs), Limiting Conditions for Operation (LCOs), Administrative Controls (ACs), or Design Features. The TSR control level verification process was developed and implemented by a team of contractor personnel with the participation of Fluor Daniel Hanford, Inc. (FDH), the Project Hanford Management Contract (PHMC) integrating contractor, and RL representatives. The team was composed of individuals with the following experience base: nuclear safety analysis; licensing; nuclear industry and DOE-complex TSR preparation/review experience; tank farm operations; FDH policy and compliance; and RL-TWRS oversight. Each TSR control level designation was completed utilizing TSR control logic diagrams and TSR criteria checklists based on DOE Orders, Standards, Contractor TSR policy, and other guidance. The control logic diagrams and criteria checklists were reviewed and modified by team members during team meetings. The TSR control level verification process was used to systematically evaluate 12 LCOs, 22 AC programs, and approximately 100 program key elements identified in the TWRS TSR document. The verification of each TSR control required a team consensus. Based on the results of the process, refinements were identified and the TWRS TSRs were modified as appropriate. A final report documenting key assumptions and the control level designation for each TSR control was prepared and is maintained on file for future reference. The results of the process were used as a reference in the RL review of the final TWRS TSRs and control suite. RL

  13. Space Station data system analysis/architecture study. Task 1: Functional requirements definition, DR-5

    Science.gov (United States)

    1985-01-01

    The initial task in the Space Station Data System (SSDS) Analysis/Architecture Study is the definition of the functional and key performance requirements for the SSDS. The SSDS is the set of hardware and software, both on the ground and in space, that provides the basic data management services for Space Station customers and systems. The primary purpose of the requirements development activity was to provide a coordinated, documented requirements set as a basis for the system definition of the SSDS and for other subsequent study activities. These requirements should also prove useful to other Space Station activities in that they provide an indication of the scope of the information services and systems that will be needed in the Space Station program. The major results of the requirements development task are as follows: (1) identification of a conceptual topology and architecture for the end-to-end Space Station Information Systems (SSIS); (2) development of a complete set of functional requirements and design drivers for the SSIS; (3) development of functional requirements and key performance requirements for the Space Station Data System (SSDS); and (4) definition of an operating concept for the SSIS. The operating concept was developed both from a Space Station payload customer and operator perspective in order to allow a requirements practicality assessment.

  14. Monitoring and control requirement definition study for Dispersed Storage and Generation (DSG). Volume 4, appendix C: Identification from utility visits of present and future approaches to integration of DSG into distribution networks

    Science.gov (United States)

    1980-01-01

    Visits to four utilities concerned with the use of DSG power sources on their distribution networks yielded useful impressions of present and future approaches to the integration of DSGs into electrical distribution network. Different approaches to future utility systems with DSG are beginning to take shape. The new DSG sources will be in decentralized locations with some measure of centralized control. The utilities have yet to establish firmly the communication and control means or their organization. For the present, the means for integrating the DSGs and their associated monitoring and control equipment into a unified system have not been decided.

  15. 9 CFR 381.195 - Definitions; requirements for importation into the United States.

    Science.gov (United States)

    2010-01-01

    ... PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Definitions; requirements for importation into the United States. 381.195 Section 381.195 Animals and Animal Products FOOD SAFETY AND...

  16. 78 FR 12955 - Final Requirements, Definitions, and Selection Criteria-Native American Career and Technical...

    Science.gov (United States)

    2013-02-26

    ... career and technical education programs (20 U.S.C. 2326(e)). This notice does not preclude us from... DEPARTMENT OF EDUCATION 34 CFR Chapter IV [Docket ID ED-2012-OVAE-0053] Final Requirements, Definitions, and Selection Criteria--Native American Career and Technical Education Program (NACTEP) [Catalog...

  17. Mission requirements for a manned earth observatory. Task 2: Reference mission definition and analyiss, volume 2

    Science.gov (United States)

    1973-01-01

    The mission requirements and conceptual design of manned earth observatory payloads for the 1980 time period are discussed. Projections of 1980 sensor technology and user data requirements were used to formulate typical basic criteria pertaining to experiments, sensor complements, and reference missions. The subjects discussed are: (1) mission selection and prioritization, (2) baseline mission analysis, (3) earth observation data handling and contingency plans, and (4) analysis of low cost mission definition and rationale.

  18. Orbital transfer vehicle concept definition and system analysis study. Volume 2: OTV concept definition and evaluation. Book 1: Mission and system requirements

    Science.gov (United States)

    Kofal, Allen E.

    1987-01-01

    The mission and system requirements for the concept definition and system analysis of the Orbital Transfer Vehicle (OTV) are established. The requirements set forth constitute the single authority for the selection, evaluation, and optimization of the technical performance and design of the OTV. This requirements document forms the basis for the Ground and Space Based OTV concept definition analyses and establishes the physical, functional, performance and design relationships to STS, Space Station, Orbital Maneuvering Vehicle (OMV), and payloads.

  19. Design requirements and development of an airborne descent path definition algorithm for time navigation

    Science.gov (United States)

    Izumi, K. H.; Thompson, J. L.; Groce, J. L.; Schwab, R. W.

    1986-01-01

    The design requirements for a 4D path definition algorithm are described. These requirements were developed for the NASA ATOPS as an extension of the Local Flow Management/Profile Descent algorithm. They specify the processing flow, functional and data architectures, and system input requirements, and recommended the addition of a broad path revision (reinitialization) function capability. The document also summarizes algorithm design enhancements and the implementation status of the algorithm on an in-house PDP-11/70 computer. Finally, the requirements for the pilot-computer interfaces, the lateral path processor, and guidance and steering function are described.

  20. A hierarchical modeling methodology for the definition and selection of requirements

    Science.gov (United States)

    Dufresne, Stephane

    This dissertation describes the development of a requirements analysis methodology that takes into account the concept of operations and the hierarchical decomposition of aerospace systems. At the core of the methodology, the Analytic Network Process (ANP) is used to ensure the traceability between the qualitative and quantitative information present in the hierarchical model. The proposed methodology is implemented to the requirements definition of a hurricane tracker Unmanned Aerial Vehicle. Three research objectives are identified in this work; (1) improve the requirements mapping process by matching the stakeholder expectations with the concept of operations, systems and available resources; (2) reduce the epistemic uncertainty surrounding the requirements and requirements mapping; and (3) improve the requirements down-selection process by taking into account the level of importance of the criteria and the available resources. Several challenges are associated with the identification and definition of requirements. The complexity of the system implies that a large number of requirements are needed to define the systems. These requirements are defined early in the conceptual design, where the level of knowledge is relatively low and the level of uncertainty is large. The proposed methodology intends to increase the level of knowledge and reduce the level of uncertainty by guiding the design team through a structured process. To address these challenges, a new methodology is created to flow-down the requirements from the stakeholder expectations to the systems alternatives. A taxonomy of requirements is created to classify the information gathered during the problem definition. Subsequently, the operational and systems functions and measures of effectiveness are integrated to a hierarchical model to allow the traceability of the information. Monte Carlo methods are used to evaluate the variations of the hierarchical model elements and consequently reduce the

  1. Requirements and solutions for accelerator control systems

    International Nuclear Information System (INIS)

    Anicic, D.; Blumer, T.; Jirousek, I.; Lutz, H.; Mezger, A.

    2001-01-01

    Throughout the life cycle of control systems, we are faced with the question of what fabulous new piece of hardware or software should be used and how to integrate this into a viable system. Accelerators cover a wide range, from simple cyclotrons for isotope production, to cascades of cyclotrons for variable energy and multiple particles, this precludes a standard answer for all cases. The system requirements according to the purpose and nature of the accelerator are analyzed and we try to extract some guidelines for implementation, development and maintenance of the appropriate control systems. We then try to analyze present trends in a selection of fields like operating systems, commercial systems, software sharing, field busses, etc

  2. Requirements for quality control of analytical data

    International Nuclear Information System (INIS)

    Westmoreland, R.D.; Bartling, M.H.

    1990-07-01

    The National Contingency Plan (NCP) of the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) provides procedures for the identification, evaluation, and remediation of past hazardous waste disposal sites. The Hazardous Materials Response section of the NCP consists of several phases: Preliminary Assessment, Site Inspection, Remedial Investigation, Feasibility Study, Remedial Design, and Remedial Action. During any of these phases, analysis of soil, water, and waste samples may be performed. The Hazardous Waste Remedial Actions Program (HAZWRAP) is involved in performing field investigations and sample analyses pursuant to the NCP for the US Department of Energy and other federal agencies. The purpose of this document is to specify the requirements of Martin Marietta Energy Systems, Inc., for the control of accuracy, precision, and completeness of samples and data from the point of collection through analysis. Requirements include data reduction and reporting of resulting environmentally related data. Because every instance and concern may not be addressed in this document, HAZWRAP subcontractors are encouraged to discuss any questions with the Analytical Quality Control Specialist (AQCS) and the HAZWRAP Project Manager. This revision supercedes all other versions of this document

  3. Double Shell Tank (DST) Monitor and Control Subsystem Definition Report

    International Nuclear Information System (INIS)

    BAFUS, R.R.

    2000-01-01

    The system description of the Double-Shell Tank (DST) Monitor and Control Subsystem establishes the system boundaries and describes the interface of the DST Monitor and Control Subsystem with new and existing systems that are required to accomplish the Waste Feed Delivery (WFD) mission

  4. 26 CFR 1.957-1 - Definition of controlled foreign corporation.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 10 2010-04-01 2010-04-01 false Definition of controlled foreign corporation. 1...) INCOME TAX (CONTINUED) INCOME TAXES Controlled Foreign Corporations § 1.957-1 Definition of controlled foreign corporation. (a) In general. The term controlled foreign corporation means any foreign corporation...

  5. Updated requirements for control room annunciation: an operations perspective

    International Nuclear Information System (INIS)

    Davey, E.; Lane, L.

    2001-01-01

    The purpose of this paper is to describe the results of updating and aligning requirements for annunciation functionality and performance with current expectations for operational excellence. This redefinition of annunciation requirements was undertaken as one component of a project to characterize improvement priorities, establish the operational and economic basis for improvement, and identify preferred implementation options for Ontario Power Generation plants. The updated requirements express the kinds of information support annunciation should provide to Operations staff to support the detection, recognition and response to changes in plant conditions. The updated requirements were developed using several types of information: management and industry expectations for operations excellence, previous definitions of user needs for annunciation, and operational and ergonomic principles. Operations and engineering staff at several stations have helped refine and complete the initial requirements definition. Application of these updated requirements is expected to lead to more effective and task relevant annunciation system improvements that better serve plant operation needs. The paper outlines the project rationale, reviews development objectives, discusses the approaches applied for requirements definition and organization, describes key requirements findings in relation to current operations experience, and discusses the proposed application of these requirements for guiding future annunciation system improvements. (author)

  6. Integrated Application of Active Controls (IAAC) technology to an advanced subsonic transport project: Current and advanced act control system definition study

    Science.gov (United States)

    1982-01-01

    The Current and Advanced Technology ACT control system definition tasks of the Integrated Application of Active Controls (IAAC) Technology project within the Energy Efficient Transport Program are summarized. The systems mechanize six active control functions: (1) pitch augmented stability; (2) angle of attack limiting; (3) lateral/directional augmented stability; (4) gust load alleviation; (5) maneuver load control; and (6) flutter mode control. The redundant digital control systems meet all function requirements with required reliability and declining weight and cost as advanced technology is introduced.

  7. Space Station Furnace Facility. Volume 1: Requirements definition and conceptual design study, executive summary

    Science.gov (United States)

    1992-05-01

    The Space Station Freedom Furnace (SSFF) Study was awarded on June 2, 1989, to Teledyne Brown Engineering (TBE) to define an advanced facility for materials research in the microgravity environment of Space Station Freedom (SSF). The SSFF will be designed for research in the solidification of metals and alloys, the crystal growth of electronic and electro-optical materials, and research in glasses and ceramics. The SSFF is one of the first 'facility' class payloads planned by the Microgravity Science and Applications Division (MSAD) of the Office of Space Science and Applications of NASA Headquarters. This facility is planned for early deployment during man-tended operations of the SSF with continuing operations through the Permanently Manned Configuration (PMC). The SSFF will be built around a general 'Core' facility which provides common support functions not provided by SSF, common subsystems which are best centralized, and common subsystems which are best distributed with each experiment module. The intent of the facility approach is to reduce the overall cost associated with implementing and operating a variety of experiments. This is achieved by reducing the launch mass and simplifying the hardware development and qualification processes associated with each experiment. The Core will remain on orbit and will require only periodic maintenance and upgrading while new Furnace Modules, samples, and consumables are developed, qualified, and transported to the SSF. The SSFF Study was divided into two phases: phase 1, a definition study phase, and phase 2, a design and development phase. The definition phase 1 is addressed. Phase 1 was divided into two parts. In the first part, the basic part of the effort, covered the preliminary definition and assessment of requirements; conceptual design of the SSFF; fabrication of mockups; and the preparation for and support of the Conceptual Design Review (CoDR). The second part, the option part, covered requirements update and

  8. 78 FR 12702 - Control of Communicable Diseases: Foreign; Scope and Definitions

    Science.gov (United States)

    2013-02-25

    ... Control of Communicable Diseases: Foreign; Scope and Definitions AGENCY: Centers for Disease Control and...; withdrawal. SUMMARY: The Centers for Disease Control and Prevention (CDC) within the Department of Health and... solicited public comment on updates to the Scope and Definitions for its regulations. DATES: The Notice of...

  9. 78 FR 12702 - Control of Communicable Diseases: Interstate; Scope and Definitions

    Science.gov (United States)

    2013-02-25

    ... Control of Communicable Diseases: Interstate; Scope and Definitions AGENCY: Centers for Disease Control... rulemaking; withdrawal. SUMMARY: The Centers for Disease Control and Prevention (CDC) within the Department... Rulemaking (NPRM) that solicited public comment on updates to the Scope and Definitions for its regulations...

  10. 78 FR 12621 - Control of Communicable Diseases: Interstate; Scope and Definitions

    Science.gov (United States)

    2013-02-25

    ... Control of Communicable Diseases: Interstate; Scope and Definitions AGENCY: Centers for Disease Control... effective date of Direct Final Rule. SUMMARY: The Centers for Disease Control and Prevention (CDC) within... Disease [[Page 12622

  11. 76 FR 34577 - Wassenaar Arrangement 2010 Plenary Agreements Implementation: Commerce Control List, Definitions...

    Science.gov (United States)

    2011-06-14

    ...This document corrects errors in a final rule published by the Bureau of Industry and Security (BIS) in the Federal Register on Friday, May 20, 2011 that revised the Export Administration Regulations (EAR) by amending entries for certain items that are controlled for national security reasons in Categories 1, 2, 3, 4, 5 Parts I & II, 6, 7, 8, and 9; adding and amending definitions to the EAR; and revising reporting requirements. That final rule contained errors concerning radial ball bearings, as well as editorial mistakes.

  12. Uranium-233 waste definition: Disposal options, safeguards, criticality control, and arms control

    International Nuclear Information System (INIS)

    Forsberg, C.W.; Storch, S.N.; Lewis, L.C.

    1998-01-01

    The US investigated the use of 233 U for weapons, reactors, and other purposes from the 1950s into the 1970s. Based on the results of these investigations, it was decided not to use 233 U on a large scale. Most of the 233 U-containing materials were placed in long-term storage. At the end of the cold war, the US initiated, as part of its arms control policies, a disposition program for excess fissile materials. Other programs were accelerated for disposal of radioactive wastes placed in storage during the cold war. Last, potential safety issues were identified related to the storage of some 233 U-containing materials. Because of these changes, significant activities associated with 233 U-containing materials are expected. This report is one of a series of reports to provide the technical bases for future decisions on how to manage this material. A basis for defining when 233 U-containing materials can be managed as waste and when they must be managed as concentrated fissile materials has been developed. The requirements for storage, transport, and disposal of radioactive wastes are significantly different than those for fissile materials. Because of these differences, it is important to classify material in its appropriate category. The establishment of a definition of what is waste and what is fissile material will provide the guidance for appropriate management of these materials. Wastes are defined in this report as materials containing sufficiently small masses or low concentrations of fissile materials such that they can be managed as typical radioactive waste. Concentrated fissile materials are defined herein as materials containing sufficient fissile content such as to warrant special handling to address nuclear criticality, safeguards, and arms control concerns

  13. Environmental control and life support system requirements and technology needs for advanced manned space missions

    Science.gov (United States)

    Powell, Ferolyn T.; Sedej, Melaine; Lin, Chin

    1987-01-01

    NASA has completed an environmental control and life support system (ECLSS) technology R&D plan for advanced missions which gave attention to the drivers (crew size, mission duration, etc.) of a range of manned missions under consideration. Key planning guidelines encompassed a time horizon greater than 50 years, funding resource requirements, an evolutionary approach to goal definition, and the funding of more than one approach to satisfy a given perceived requirement. Attention was given to the ECLSS requirements of transportation and service vehicles, platforms, bases and settlements, ECLSS functions and average load requirements, unique drivers for various missions, and potentially exploitable commonalities among vehicles and habitats.

  14. Reducing feedback requirements of workload control

    NARCIS (Netherlands)

    Henrich, Peter; Land, Martin; van der Zee, Durk; Gaalman, Gerard

    2004-01-01

    The workload control concept is known as a robust shop floor control concept. It is especially suited for the dynamic environment of small- and medium-sized enterprises (SMEs) within the make-to-order sector. Before orders are released to the shop floor, they are collected in an ‘order pool’. To

  15. Motor Control Research Requires Nonlinear Dynamics

    Science.gov (United States)

    Guastello, Stephen J.

    2006-01-01

    The author comments on the original article "The Cinderella of psychology: The neglect of motor control in the science of mental life and behavior," by D. A. Rosenbaum. Rosenbaum draws attention to the study of motor control and evaluates seven possible explanations for why the topic has been relatively neglected. The point of this comment is that…

  16. Design requirement on KALIMER control rod assembly duct

    International Nuclear Information System (INIS)

    Hwang, W.; Kang, H. Y.; Nam, C.; Kim, J. O.; Kim, Y. J.

    1998-03-01

    This document establishes the design guidelines which are needs for designing the control rod assembly duct of the KALIMER as design requirements. it describes control rod assembly duct of the KALIMER and its requirements that includes functional requirements, performance requirements, interfacing systems, design limits and strength requirements, seismic requirements, structural requirements, environmental requirements, reliability and safety requirements, standard and codes, QA programs, and other requirements. The control rod system consists of three parts, which are drive mechanism, drive-line, and absorber bundle. This report deals with the absorber bundle and its outer duct only because the others are beyond the scope of fuel system design. The guidelines for design requirements intend to be used for an improved design of the control rod assembly duct of the KALIMER. (author). 19 refs

  17. Design requirement on KALIMER control rod assembly duct

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, W.; Kang, H. Y.; Nam, C.; Kim, J. O.; Kim, Y. J

    1998-03-01

    This document establishes the design guidelines which are needs for designing the control rod assembly duct of the KALIMER as design requirements. it describes control rod assembly duct of the KALIMER and its requirements that includes functional requirements, performance requirements, interfacing systems, design limits and strength requirements, seismic requirements, structural requirements, environmental requirements, reliability and safety requirements, standard and codes, QA programs, and other requirements. The control rod system consists of three parts, which are drive mechanism, drive-line, and absorber bundle. This report deals with the absorber bundle and its outer duct only because the others are beyond the scope of fuel system design. The guidelines for design requirements intend to be used for an improved design of the control rod assembly duct of the KALIMER. (author). 19 refs.

  18. Software solutions manage the definition, operation, maintenance and configuration control of the National Ignition Facility

    International Nuclear Information System (INIS)

    Dobson, Darwin; Churby, Al; Krieger, Ed; Maloy, Donna; White, Kevin

    2012-01-01

    Highlights: ► NIF is a complex experimental facility composed of ∼4 million components. ► We describe business tools to define, build, operate, and maintain all components. ► CAD tools generate virtual models and assemblies under configuration control. ► Items requiring preventive, reactive, and/or calibration maintenance are tracked. ► Radiological or hazardous materials undergo additional controls. - Abstract: The National Ignition Facility (NIF) is the world's largest laser composed of millions of individual parts brought together to form one massive assembly. Maintaining control of the physical definition, status and configuration of this structure is a monumental undertaking yet critical to the validity of experimental data and the safe operation of the facility. A major programmatic challenge is to deploy software solutions to effectively manage the definition, build, operation, and maintenance, and configuration control of all components of NIF. The strategy for meeting this challenge involves deploying and integrating an enterprise application suite of solutions consisting of both Commercial-Off-The-Shelf (COTS) products and custom developed software.This paper describes how this strategy has been implemented along with a discussion on the successes realized and the ongoing challenges associated with this approach.

  19. An evaluation of HIV elite controller definitions within a large seroconverter cohort collaboration

    NARCIS (Netherlands)

    Olson, Ashley D.; Meyer, Laurence; Prins, Maria; Thiebaut, Rodolphe; Gurdasani, Deepti; Guiguet, Marguerite; Chaix, Marie-Laure; Amornkul, Pauli; Babiker, Abdel; Sandhu, Manjinder S.; Porter, Kholoud; del Amo, Julia; Bucher, Heiner C.; Chêne, Geneviève; Hamouda, Osamah; Pillay, Deenan; Rosinska, Magda; Sabin, Caroline; Touloumi, Giota; Olson, Ashley; Coughlin, Kate; Walker, Sarah; de Luca, Andrea; Fisher, Martin; Muga, Roberto; Kelleher, Tony; Cooper, David; Grey, Pat; Finlayson, Robert; Bloch, Mark; Ramacciotti, Tim; Gelgor, Linda; Smith, Don; Zangerle, Robert; Gill, John; Lutsar, Irja; Dabis, Francois; Masquelier, Bernard; Costagliola, Dominique; Vanhems, Philippe; Ghosn, Jade; Boufassa, Faroudy; Kücherer, Claudia; Bartmeyer, Barbara; Paparizos, V.; Gargalianos-Kakolyris, P.; Geskus, Ronald; van der Helm, Jannie; Schuitemaker, Hanneke; Reiss, Peter

    2014-01-01

    Understanding the mechanisms underlying viral control is highly relevant to vaccine studies and elite control (EC) of HIV infection. Although numerous definitions of EC exist, it is not clear which, if any, best identify this rare phenotype. We assessed a number of EC definitions used in the

  20. 42 CFR 84.40 - Quality control plans; filing requirements.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Quality control plans; filing requirements. 84.40... Control § 84.40 Quality control plans; filing requirements. As a part of each application for approval or... proposed quality control plan which shall be designed to assure the quality of respiratory protection...

  1. 42 CFR 84.256 - Quality control requirements.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Quality control requirements. 84.256 Section 84.256... § 84.256 Quality control requirements. (a) In addition to the construction and performance requirements specified in §§ 84.251, 84.252, 84.253, 84.254, and 84.255, the quality control requirements in paragraphs...

  2. Severe Chronic Upper Airway Disease (SCUAD) in children. Definition issues and requirements.

    Science.gov (United States)

    Karatzanis, A; Kalogjera, L; Scadding, G; Velegrakis, S; Kawauchi, H; Cingi, C; Prokopakis, E

    2015-07-01

    Upper airway diseases are extremely common, and a significant proportion of patients are not adequately controlled by contemporary treatment algorithms. The term SCUAD (Severe Chronic Upper Airway Disease) has been previously introduced to describe such cases. However, this term has not been adequately focused on children. This study aims to address the necessity of the term, as well as further details specifically for children. For this purpose, a review was performed of the current literature, with specific focus on issues regarding SCUAD in children. Paediatric SCUAD represents a heterogeneous group of patients and has significant clinical and socioeconomic implications. Relevant literature is generally lacking and questions regarding definition and pathogenesis remain unanswered. Accurate definition and acknowledgement of paediatric SCUAD cases may lead to better design of future clinical and molecular research protocols. This may provide improved understanding of the underlying disease processes, more accurate data regarding socioeconomic burden, and, above all, more successful treatment and prevention strategies. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  3. Body mass index affects time to definitive closure after damage control surgery.

    Science.gov (United States)

    Haricharan, Ramanath N; Dooley, Adam C; Weinberg, Jordan A; McGwin, Gerald; MacLennan, Paul A; Griffin, Russell L; Rue, Loring W; Reiff, Donald A

    2009-06-01

    A growing body of literature demonstrates that irrespective of the mechanism of injury, obesity is associated with significantly worse morbidity and mortality after trauma. Among patients requiring damage control laparotomy (DCL), clinical experience suggests that obesity affects time to definitive closure though this association has never been demonstrated quantitatively. All patients at an academic Level I trauma center requiring a DCL between January 2002 and December 2006 (N = 148) were included. Information pertaining to demographic, injury, and clinical characteristics was abstracted from patient medical records. The risk of specific complications including pneumonia, renal failure, and sepsis was compared between normal and overweight/obese patients, as measured by body mass index (BMI). The lengths of intensive care unit (ICU) stay and mechanical ventilation as well as time to abdominal closure were also compared. The risk of pneumonia, sepsis, and renal failure was 2.05-times, 1.77-times, and 2.84-times higher among overweight patients compared with patients with a normal BMI. The risk of pneumonia, sepsis, and renal failure was 2.01-times, 4.24-times, and 1.85-times higher among obese patients compared with those with a normal BMI. Obese patients also had a significantly longer ICU length of stay (28.7 days vs. 15.1 days; p < 0.0001), longer hospitalization (39.3 days vs. 27.0 days; p = 0.008), and time to definitive closure (8.4 days vs. 3.9 days; p = 0.03) compared with patients with a normal BMI. Among patients requiring DCL, those who are overweight or obese have a prolonged time to definitive closure. These patients also experience a significantly longer ICU course and a higher risk of pneumonia.

  4. Software solutions manage the definition, operation, maintenance and configuration control of the National Ignition Facility

    International Nuclear Information System (INIS)

    Dobson, D.; Churby, A.; Krieger, E.; Maloy, D.; White, K.

    2011-01-01

    The National Ignition Facility (NIF) is the world's largest laser composed of millions of individual parts brought together to form one massive assembly. Maintaining control of the physical definition, status and configuration of this structure is a monumental undertaking yet critical to the validity of the shot experiment data and the safe operation of the facility. The NIF business application suite of software provides the means to effectively manage the definition, build, operation, maintenance and configuration control of all components of the National Ignition Facility. State of the art Computer Aided Design software applications are used to generate a virtual model and assemblies. Engineering bills of material are controlled through the Enterprise Configuration Management System. This data structure is passed to the Enterprise Resource Planning system to create a manufacturing bill of material. Specific parts are serialized then tracked along their entire lifecycle providing visibility to the location and status of optical, target and diagnostic components that are key to assessing pre-shot machine readiness. Nearly forty thousand items requiring preventive, reactive and calibration maintenance are tracked through the System Maintenance and Reliability Tracking application to ensure proper operation. Radiological tracking applications ensure proper stewardship of radiological and hazardous materials and help provide a safe working environment for NIF personnel.

  5. Software solutions manage the definition, operation, maintenance and configuration control of the National Ignition Facility

    Energy Technology Data Exchange (ETDEWEB)

    Dobson, D; Churby, A; Krieger, E; Maloy, D; White, K

    2011-07-25

    The National Ignition Facility (NIF) is the world's largest laser composed of millions of individual parts brought together to form one massive assembly. Maintaining control of the physical definition, status and configuration of this structure is a monumental undertaking yet critical to the validity of the shot experiment data and the safe operation of the facility. The NIF business application suite of software provides the means to effectively manage the definition, build, operation, maintenance and configuration control of all components of the National Ignition Facility. State of the art Computer Aided Design software applications are used to generate a virtual model and assemblies. Engineering bills of material are controlled through the Enterprise Configuration Management System. This data structure is passed to the Enterprise Resource Planning system to create a manufacturing bill of material. Specific parts are serialized then tracked along their entire lifecycle providing visibility to the location and status of optical, target and diagnostic components that are key to assessing pre-shot machine readiness. Nearly forty thousand items requiring preventive, reactive and calibration maintenance are tracked through the System Maintenance & Reliability Tracking application to ensure proper operation. Radiological tracking applications ensure proper stewardship of radiological and hazardous materials and help provide a safe working environment for NIF personnel.

  6. 77 FR 24690 - Exemplary Charter School Collaboration Awards; Proposed Definitions, Requirements, and Selection...

    Science.gov (United States)

    2012-04-25

    ... DEPARTMENT OF EDUCATION Exemplary Charter School Collaboration Awards; Proposed Definitions... definitions in section 5210 of the ESEA, which include the definition of charter school, we are proposing the... schools. (b) For non-tested grades and subjects: Alternative measures of student learning and performance...

  7. Solid Waste Management Requirements Definition for Advanced Life Support Missions: Results

    Science.gov (United States)

    Alazraki, Michael P.; Hogan, John; Levri, Julie; Fisher, John; Drysdale, Alan

    2002-01-01

    Prior to determining what Solid Waste Management (SWM) technologies should be researched and developed by the Advanced Life Support (ALS) Project for future missions, there is a need to define SWM requirements. Because future waste streams will be highly mission-dependent, missions need to be defined prior to developing SWM requirements. The SWM Working Group has used the mission architecture outlined in the System Integration, Modeling and Analysis (SIMA) Element Reference Missions Document (RMD) as a starting point in the requirement development process. The missions examined include the International Space Station (ISS), a Mars Dual Lander mission, and a Mars Base. The SWM Element has also identified common SWM functionalities needed for future missions. These functionalities include: acceptance, transport, processing, storage, monitoring and control, and disposal. Requirements in each of these six areas are currently being developed for the selected missions. This paper reviews the results of this ongoing effort and identifies mission-dependent resource recovery requirements.

  8. Quality control for terms and definitions in ontologies and taxonomies

    Directory of Open Access Journals (Sweden)

    Rüegg Alexander

    2006-04-01

    Full Text Available Abstract Background Ontologies and taxonomies are among the most important computational resources for molecular biology and bioinformatics. A series of recent papers has shown that the Gene Ontology (GO, the most prominent taxonomic resource in these fields, is marked by flaws of certain characteristic types, which flow from a failure to address basic ontological principles. As yet, no methods have been proposed which would allow ontology curators to pinpoint flawed terms or definitions in ontologies in a systematic way. Results We present computational methods that automatically identify terms and definitions which are defined in a circular or unintelligible way. We further demonstrate the potential of these methods by applying them to isolate a subset of 6001 problematic GO terms. By automatically aligning GO with other ontologies and taxonomies we were able to propose alternative synonyms and definitions for some of these problematic terms. This allows us to demonstrate that these other resources do not contain definitions superior to those supplied by GO. Conclusion Our methods provide reliable indications of the quality of terms and definitions in ontologies and taxonomies. Further, they are well suited to assist ontology curators in drawing their attention to those terms that are ill-defined. We have further shown the limitations of ontology mapping and alignment in assisting ontology curators in rectifying problems, thus pointing to the need for manual curation.

  9. [Guideline-adherent inpatient psychiatric psychotherapeutic treatment of borderline personality disorder : Normative definition of personnel requirements].

    Science.gov (United States)

    Bohus, M; Schmahl, C; Herpertz, S C; Lieb, K; Berger, M; Roepke, S; Heinz, A; Gallinat, J; Lyssenko, L

    2016-07-01

    Borderline personality disorders (BPD) are severe mental diseases which place high pressure on the psychiatric healthcare system. Nowadays, well-tested, disorder-specific treatment concepts are available also for inpatient treatment in Germany. These show very good and long-term improvements in the psychopathology as well as posttreatment social participation; however, prerequisites for the implementation of these evidence-based inpatient psychotherapy programs are well-trained treatment teams and appropriate financing of resource expenditure. The aim was to formulate a definition of normative needs for treatment duration and intensity for a guideline-conform, empirically proven and effective inpatient treatment of borderline personality disorder as well as the derived personnel requirements in comparison to the currently available resources within the framework of the Psychiatry Personnel Act (Psych-PV). The resource requirements were established based on evaluated hospital ward models, the recommendations of the S2 guidelines and the criteria of specialist societies and compared with the personnel stipulations according to the Psych-PV. The results for a normatively established treatment program showed a pronounced deficit in the financing of the evaluated resource requirements, even when the stipulations laid down in the Psych-PV were implemented to 100 %. Disorder-specific inpatient treatment programs for borderline personality disorder have been scientifically proven to be highly effective; however, resource analyses show that the personnel requirements necessary for effective implementation of these programs are much higher than those allocated by the funding according to the Pysch-PV. The current underfunding leads to inadequate treatment outcomes with high readmission rates and as a result high direct and indirect costs of illness.

  10. Electronic Nose Testing Procedure for the Definition of Minimum Performance Requirements for Environmental Odor Monitoring

    Directory of Open Access Journals (Sweden)

    Lidia Eusebio

    2016-09-01

    Full Text Available Despite initial enthusiasm towards electronic noses and their possible application in different fields, and quite a lot of promising results, several criticalities emerge from most published research studies, and, as a matter of fact, the diffusion of electronic noses in real-life applications is still very limited. In general, a first step towards large-scale-diffusion of an analysis method, is standardization. The aim of this paper is describing the experimental procedure adopted in order to evaluate electronic nose performances, with the final purpose of establishing minimum performance requirements, which is considered to be a first crucial step towards standardization of the specific case of electronic nose application for environmental odor monitoring at receptors. Based on the experimental results of the performance testing of a commercialized electronic nose type with respect to three criteria (i.e., response invariability to variable atmospheric conditions, instrumental detection limit, and odor classification accuracy, it was possible to hypothesize a logic that could be adopted for the definition of minimum performance requirements, according to the idea that these are technologically achievable.

  11. 77 FR 75880 - Control of Communicable Diseases: Interstate; Scope and Definitions

    Science.gov (United States)

    2012-12-26

    ... definitions related to the control of communicable diseases and add more current medical terminology where... definitions for interstate quarantine regulations to reflect modern terminology and plain language used by..., under section 70.1, to reflect modern terminology and plain language commonly used by private sector...

  12. Technology requirement for Halal quality control | Husny | Journal of ...

    African Journals Online (AJOL)

    Technology requirement for Halal quality control. ... Findings show that each industry segments have different technology characteristics preference. ... Keywords: halal industry, quality control; technology assistance; food and beverage; ...

  13. Definition of blindness under National Programme for Control of Blindness: Do we need to revise it?

    Science.gov (United States)

    Vashist, Praveen; Senjam, Suraj Singh; Gupta, Vivek; Gupta, Noopur; Kumar, Atul

    2017-02-01

    A review appropriateness of the current definition of blindness under National Programme for Control of Blindness (NPCB), Government of India. Online search of peer-reviewed scientific published literature and guidelines using PubMed, the World Health Organization (WHO) IRIS, and Google Scholar with keywords, namely blindness and visual impairment, along with offline examination of reports of national and international organizations, as well as their cross-references was done until December 2016, to identify relevant documents on the definition of blindness. The evidence for the historical and currently adopted definition of blindness under the NPCB, the WHO, and other countries was reviewed. Differences in the NPCB and WHO definitions were analyzed to assess the impact on the epidemiological status of blindness and visual impairment in India. The differences in the criteria for blindness under the NPCB and the WHO definitions cause an overestimation of the prevalence of blindness in India. These variations are also associated with an over-representation of refractive errors as a cause of blindness and an under-representation of other causes under the NPCB definition. The targets for achieving elimination of blindness also become much more difficult to achieve under the NPCB definition. Ignoring differences in definitions when comparing the global and Indian prevalence of blindness will cause erroneous interpretations. We recommend that the appropriate modifications should be made in the NPCB definition of blindness to make it consistent with the WHO definition.

  14. Definition of blindness under National Programme for Control of Blindness: Do we need to revise it?

    Directory of Open Access Journals (Sweden)

    Praveen Vashist

    2017-01-01

    Full Text Available A review appropriateness of the current definition of blindness under National Programme for Control of Blindness (NPCB, Government of India. Online search of peer-reviewed scientific published literature and guidelines using PubMed, the World Health Organization (WHO IRIS, and Google Scholar with keywords, namely blindness and visual impairment, along with offline examination of reports of national and international organizations, as well as their cross-references was done until December 2016, to identify relevant documents on the definition of blindness. The evidence for the historical and currently adopted definition of blindness under the NPCB, the WHO, and other countries was reviewed. Differences in the NPCB and WHO definitions were analyzed to assess the impact on the epidemiological status of blindness and visual impairment in India. The differences in the criteria for blindness under the NPCB and the WHO definitions cause an overestimation of the prevalence of blindness in India. These variations are also associated with an over-representation of refractive errors as a cause of blindness and an under-representation of other causes under the NPCB definition. The targets for achieving elimination of blindness also become much more difficult to achieve under the NPCB definition. Ignoring differences in definitions when comparing the global and Indian prevalence of blindness will cause erroneous interpretations. We recommend that the appropriate modifications should be made in the NPCB definition of blindness to make it consistent with the WHO definition.

  15. Enhanced definition and required examples of common datum imposed by ISO standard

    Science.gov (United States)

    Yan, Yiqing; Bohn, Martin

    2017-12-01

    According to the ISO Geometrical Product Specifications (GPS), the establishment and definition of common datum for geometrical components are not fully defined. There are two main limitations of this standard. Firstly: the explications of ISO examples of common datums are not matched with their corresponding definitions, and secondly: a full definition of common datum is missing. This paper suggests a new approach for an enhanced definition and concrete examples of common datum and proposes a holistic methodology for establishment of common datum for each geometrical component. This research is based on the analysis of physical behaviour of geometrical components, orientation constraints and invariance classes of datums. This approach fills the definition gaps of common datum based on ISO GPS, thereby eliminating those deficits. As a result, an improved methodology for a fully functional defined definition of common datum was formulated.

  16. 30 CFR 28.30 - Quality control plans; filing requirements.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Quality control plans; filing requirements. 28... PROTECTION FOR TRAILING CABLES IN COAL MINES Quality Control § 28.30 Quality control plans; filing... part, each applicant shall file with MSHA a proposed quality control plan which shall be designed to...

  17. 78 FR 12622 - Control of Communicable Diseases: Foreign; Scope and Definitions

    Science.gov (United States)

    2013-02-25

    ... Control of Communicable Diseases: Foreign; Scope and Definitions AGENCY: Centers for Disease Control and... of direct final rule. SUMMARY: The Centers for Disease Control and Prevention (CDC) within the... INFORMATION CONTACT: For questions concerning this notice: Ashley A. Marrone, JD, Centers for Disease Control...

  18. 40 CFR 63.2343 - What are my requirements for emission sources not requiring control?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 12 2010-07-01 2010-07-01 true What are my requirements for emission sources not requiring control? 63.2343 Section 63.2343 Protection of Environment ENVIRONMENTAL PROTECTION... (Non-Gasoline) What This Subpart Covers § 63.2343 What are my requirements for emission sources not...

  19. Definition of common support equipment and space station interface requirements for IOC model technology experiments

    Science.gov (United States)

    Russell, Richard A.; Waiss, Richard D.

    1988-01-01

    A study was conducted to identify the common support equipment and Space Station interface requirements for the IOC (initial operating capabilities) model technology experiments. In particular, each principal investigator for the proposed model technology experiment was contacted and visited for technical understanding and support for the generation of the detailed technical backup data required for completion of this study. Based on the data generated, a strong case can be made for a dedicated technology experiment command and control work station consisting of a command keyboard, cathode ray tube, data processing and storage, and an alert/annunciator panel located in the pressurized laboratory.

  20. Evaluation and qualification of novel control techniques with safety requirements

    International Nuclear Information System (INIS)

    Gossner, S.; Wach, D.

    1985-01-01

    The paper discusses the questions related to the assessment and qualification of new I and C-systems. The tasks of nuclear power plant I and Cs as well as the efficiency of the new techniques are reflected. Problems with application of new I and Cs and the state of application in Germany and abroad are addressed. Starting from the essential differencies between conventional and new I and C-systems it is evaluated, if and in which way existing safety requirements can be met and to what extent new requirements need to be formulated. An overall concept has to be developed comprising the definition of graded requirement profiles for design and qualification. Associated qualification procedures and tools have to be adapted, developed and tuned upon each other. (orig./HP) [de

  1. Customer requirement modeling and mapping of numerical control machine

    Directory of Open Access Journals (Sweden)

    Zhongqi Sheng

    2015-10-01

    Full Text Available In order to better obtain information about customer requirement and develop products meeting customer requirement, it is necessary to systematically analyze and handle the customer requirement. This article uses the product service system of numerical control machine as research objective and studies the customer requirement modeling and mapping oriented toward configuration design. It introduces the conception of requirement unit, expounds the customer requirement decomposition rules, and establishes customer requirement model; it builds the house of quality using quality function deployment and confirms the weight of technical feature of product and service; it explores the relevance rules between data using rough set theory, establishes rule database, and solves the target value of technical feature of product. Using economical turning center series numerical control machine as an example, it verifies the rationality of proposed customer requirement model.

  2. A performance requirements analysis of the SSC control system

    International Nuclear Information System (INIS)

    Hunt, S.M.; Low, K.

    1992-01-01

    This paper presents the results of analysis of the performance requirements of the Superconducting Super Collider Control System. We quantify the performance requirements of the system in terms of response time, throughput and reliability. We then examine the effect of distance and traffic patterns on control system performance and examine how these factors influence the implementation of the control network architecture and compare the proposed system against those criteria. (author)

  3. Railing for safety: job demands, job control, and safety citizenship role definition.

    Science.gov (United States)

    Turner, Nick; Chmiel, Nik; Walls, Melanie

    2005-10-01

    This study investigated job demands and job control as predictors of safety citizenship role definition, that is, employees' role orientation toward improving workplace safety. Data from a survey of 334 trackside workers were framed in the context of R. A. Karasek's (1979) job demands-control model. High job demands were negatively related to safety citizenship role definition, whereas high job control was positively related to this construct. Safety citizenship role definition of employees with high job control was buffered from the influence of high job demands, unlike that of employees with low job control, for whom high job demands were related to lower levels of the construct. Employees facing both high job demands and low job control were less likely than other employees to view improving safety as part of their role orientation. Copyright (c) 2005 APA, all rights reserved.

  4. The Requirement of a Positive Definite Covariance Matrix of Security Returns for Mean-Variance Portfolio Analysis: A Pedagogic Illustration

    Directory of Open Access Journals (Sweden)

    Clarence C. Y. Kwan

    2010-07-01

    Full Text Available This study considers, from a pedagogic perspective, a crucial requirement for the covariance matrix of security returns in mean-variance portfolio analysis. Although the requirement that the covariance matrix be positive definite is fundamental in modern finance, it has not received any attention in standard investment textbooks. Being unaware of the requirement could cause confusion for students over some strange portfolio results that are based on seemingly reasonable input parameters. This study considers the requirement both informally and analytically. Electronic spreadsheet tools for constrained optimization and basic matrix operations are utilized to illustrate the various concepts involved.

  5. 21 CFR 111.117 - What quality control operations are required for equipment, instruments, and controls?

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false What quality control operations are required for equipment, instruments, and controls? 111.117 Section 111.117 Food and Drugs FOOD AND DRUG ADMINISTRATION... and Process Control System: Requirements for Quality Control § 111.117 What quality control operations...

  6. Propulsion/flight control integration technology (PROFIT) software system definition

    Science.gov (United States)

    Carlin, C. M.; Hastings, W. J.

    1978-01-01

    The Propulsion Flight Control Integration Technology (PROFIT) program is designed to develop a flying testbed dedicated to controls research. The control software for PROFIT is defined. Maximum flexibility, needed for long term use of the flight facility, is achieved through a modular design. The Host program, processes inputs from the telemetry uplink, aircraft central computer, cockpit computer control and plant sensors to form an input data base for use by the control algorithms. The control algorithms, programmed as application modules, process the input data to generate an output data base. The Host program formats the data for output to the telemetry downlink, the cockpit computer control, and the control effectors. Two applications modules are defined - the bill of materials F-100 engine control and the bill of materials F-15 inlet control.

  7. Consensus definitions and application guidelines for control groups in cerebrospinal fluid biomarker studies in multiple sclerosis

    DEFF Research Database (Denmark)

    Teunissen, Charlotte; Menge, Til; Altintas, Ayse

    2013-01-01

    The choice of appropriate control group(s) is critical in cerebrospinal fluid (CSF) biomarker research in multiple sclerosis (MS). There is a lack of definitions and nomenclature of different control groups and a rationalized application of different control groups. We here propose consensus......). Furthermore, we discuss the application of these control groups in specific study designs, such as for diagnostic biomarker studies, prognostic biomarker studies and therapeutic response studies. Application of these uniform definitions will lead to better comparability of biomarker studies and optimal use...

  8. Decision Support System Requirements Definition for Human Extravehicular Activity Based on Cognitive Work Analysis.

    Science.gov (United States)

    Miller, Matthew James; McGuire, Kerry M; Feigh, Karen M

    2017-06-01

    The design and adoption of decision support systems within complex work domains is a challenge for cognitive systems engineering (CSE) practitioners, particularly at the onset of project development. This article presents an example of applying CSE techniques to derive design requirements compatible with traditional systems engineering to guide decision support system development. Specifically, it demonstrates the requirements derivation process based on cognitive work analysis for a subset of human spaceflight operations known as extravehicular activity . The results are presented in two phases. First, a work domain analysis revealed a comprehensive set of work functions and constraints that exist in the extravehicular activity work domain. Second, a control task analysis was performed on a subset of the work functions identified by the work domain analysis to articulate the translation of subject matter states of knowledge to high-level decision support system requirements. This work emphasizes an incremental requirements specification process as a critical component of CSE analyses to better situate CSE perspectives within the early phases of traditional systems engineering design.

  9. Space station data system analysis/architecture study. Task 1: Functional requirements definition, DR-5. Appendix: Requirements data base

    Science.gov (United States)

    1985-01-01

    Appendix A contains data that characterize the system functions in sufficient depth as to determine the requirements for the Space Station Data System (SSDS). This data is in the form of: (1) top down traceability report; (2) bottom up traceability report; (3) requirements data sheets; and (4) cross index of requirements paragraphs of the source documents and the requirements numbers. A data base users guide is included that interested parties can use to access the requirements data base and get up to date information about the functions.

  10. An Intuitive Definition of Demand Flexibility in Direct Load Control

    DEFF Research Database (Denmark)

    Tahersima, Fatemeh; Madsen, Per Printz; Andersen, Palle

    2013-01-01

    Two control approaches: direct and indirect control of demand side energy management in a smart grid are studied. Indirect control of energy demands is based on economic incentives. In this approach, consumers will shift their energy consumption with the benefit of a cut down in the electricity b...

  11. User requirements and conceptual design of the ITER Electron Cyclotron Control System

    Energy Technology Data Exchange (ETDEWEB)

    Carannante, Giuseppe, E-mail: Giuseppe.Carannante@F4E.europa.eu [Fusion for Energy, Josep Pla 2, Barcelona 08019 (Spain); Cavinato, Mario [Fusion for Energy, Josep Pla 2, Barcelona 08019 (Spain); Gandini, Franco [ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex (France); Granucci, Gustavo [Istituto di Fisica del Plasma ENEA-CNR-EURATOM, via Cozzi 53, 20125 Milano (Italy); Henderson, Mark; Purohit, Dharmesh [ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex (France); Saibene, Gabriella; Sartori, Filippo [Fusion for Energy, Josep Pla 2, Barcelona 08019 (Spain); Sozzi, Carlo [Istituto di Fisica del Plasma ENEA-CNR-EURATOM, via Cozzi 53, 20125 Milano (Italy)

    2015-10-15

    The ITER Electron Cyclotron (EC) plant is a complex system, essential for plasma operation. The system is being designed to supply up to 20 MW of power at 170 GHz; it consists of 24 RF sources (or Gyrotrons) connected by switchable transmission lines to four upper and one equatorial launcher. The complexity of the EC plant requires a Plant Controller, which provides the functional and operational interface with CODAC and the Plasma Control System and coordinates the various Subsystem Control Units, i.e. the local controllers of power supplies, Gyrotrons, transmission lines and launchers. A conceptual design of the Electron Cyclotron Control System (ECCS) was developed, starting from the collection of the user requirements, which have then been organized as a set of operational scenarios exploiting the EC system. The design consists in a thorough functional analysis, including also protection functions, and in the development of a conceptual I&C architecture. The main aim of the work was to identify the physics requirements and to translate them into control system requirements, in order to define the interfaces within the components of the ECCS. The definition of these interfaces is urgent because some of the subsystems are already in an advanced design phase. The present paper describes both the methodology used and the resulting design.

  12. System requirements specification for waste information and control system

    International Nuclear Information System (INIS)

    Harris, R.R.

    1994-09-01

    This document defines the requirements for the Waste Information and Control System (WICS). The document defines the functions, constraints, and objectives that pertain to WICS. This shall serve as the baseline document to ensure the needs of the Hazardous Material Control group (HMC) at 222-S Laboratory are met with regard to assurance of accuracy and quality of data taken with WICS

  13. Minimal requirements for quality controls in radiotherapy with external beams

    International Nuclear Information System (INIS)

    1999-01-01

    Physical dosimetric guidelines have been developed by the Italian National Institute of Health study group on quality assurance in radiotherapy to define protocols for quality controls in external beam radiotherapy. While the document does not determine strict rules or firm recommendations, it suggests minimal requirements for quality controls necessary to guarantee an adequate degree of accuracy in external beam radiotherapy [it

  14. Implementation of Energy Code Controls Requirements in New Commercial Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Rosenberg, Michael I. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hart, Philip R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hatten, Mike [Solarc Energy Group, LLC, Seattle, WA (United States); Jones, Dennis [Group 14 Engineering, Inc., Denver, CO (United States); Cooper, Matthew [Group 14 Engineering, Inc., Denver, CO (United States)

    2017-03-24

    Most state energy codes in the United States are based on one of two national model codes; ANSI/ASHRAE/IES 90.1 (Standard 90.1) or the International Code Council (ICC) International Energy Conservation Code (IECC). Since 2004, covering the last four cycles of Standard 90.1 updates, about 30% of all new requirements have been related to building controls. These requirements can be difficult to implement and verification is beyond the expertise of most building code officials, yet the assumption in studies that measure the savings from energy codes is that they are implemented and working correctly. The objective of the current research is to evaluate the degree to which high impact controls requirements included in commercial energy codes are properly designed, commissioned and implemented in new buildings. This study also evaluates the degree to which these control requirements are realizing their savings potential. This was done using a three-step process. The first step involved interviewing commissioning agents to get a better understanding of their activities as they relate to energy code required controls measures. The second involved field audits of a sample of commercial buildings to determine whether the code required control measures are being designed, commissioned and correctly implemented and functioning in new buildings. The third step includes compilation and analysis of the information gather during the first two steps. Information gathered during these activities could be valuable to code developers, energy planners, designers, building owners, and building officials.

  15. MEK kinase 1 activity is required for definitive erythropoiesis in the mouse fetal liver

    DEFF Research Database (Denmark)

    Bonnesen, Barbara; Ørskov, Cathrine; Rasmussen, Susanne

    2005-01-01

    for MEKK1 in definitive mouse erythropoiesis. Although Mekk1(DeltaKD) mice are alive and fertile on a 129 x C57/BL6 background, the frequency of Mekk1(DeltaKD) embryos that develop past embryonic day (E) 14.5 is dramatically reduced when backcrossed into the C57/BL6 background. At E13.5, Mekk1(Delta......KD) embryos have normal morphology but are anemic due to failure of definitive erythropoiesis. When Mekk1(DeltaKD) fetal liver cells were transferred to lethally irradiated wild-type hosts, mature red blood cells were generated from the mutant cells, suggesting that MEKK1 functions in a non......-cell-autonomous manner. Based on immunohistochemical and hemoglobin chain transcription analysis, we propose that the failure of definitive erythropoiesis is due to a deficiency in enucleation activity caused by insufficient macrophage-mediated nuclear DNA destruction....

  16. 46 CFR 57.04-1 - Test specimen requirements and definition of ranges (modifies QW 202, QW 210, QW 451, and QB 202).

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Test specimen requirements and definition of ranges... HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING WELDING AND BRAZING Procedure Qualification Range § 57.04-1 Test specimen requirements and definition of ranges (modifies QW 202, QW 210, QW 451, and QB 202...

  17. The contribution of material control to meeting performance requirements

    International Nuclear Information System (INIS)

    Rivers, J.D.

    1989-01-01

    The U.S. Dept. of Energy (DOE) is in the process of implementing a set of performance requirements for material control and accountability (MC ampersand A). These graded requirements set a uniform level of performance for similar materials at various facilities with respect to the threat of an insider adversary stealing special nuclear material (SNM). These requirements are phrased in terms of detecting the theft of a goal quantity of SNM within a specified time period and with a probability greater than or equal to a specified value and include defense in-depth requirements

  18. Deep Borehole Field Test Requirements and Controlled Assumptions.

    Energy Technology Data Exchange (ETDEWEB)

    Hardin, Ernest [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-07-01

    This document presents design requirements and controlled assumptions intended for use in the engineering development and testing of: 1) prototype packages for radioactive waste disposal in deep boreholes; 2) a waste package surface handling system; and 3) a subsurface system for emplacing and retrieving packages in deep boreholes. Engineering development and testing is being performed as part of the Deep Borehole Field Test (DBFT; SNL 2014a). This document presents parallel sets of requirements for a waste disposal system and for the DBFT, showing the close relationship. In addition to design, it will also inform planning for drilling, construction, and scientific characterization activities for the DBFT. The information presented here follows typical preparations for engineering design. It includes functional and operating requirements for handling and emplacement/retrieval equipment, waste package design and emplacement requirements, borehole construction requirements, sealing requirements, and performance criteria. Assumptions are included where they could impact engineering design. Design solutions are avoided in the requirements discussion. Deep Borehole Field Test Requirements and Controlled Assumptions July 21, 2015 iv ACKNOWLEDGEMENTS This set of requirements and assumptions has benefited greatly from reviews by Gordon Appel, Geoff Freeze, Kris Kuhlman, Bob MacKinnon, Steve Pye, David Sassani, Dave Sevougian, and Jiann Su.

  19. 13 CFR 108.1830 - NMVC Company's Capital Impairment definition and general requirements.

    Science.gov (United States)

    2010-01-01

    ... ADMINISTRATION NEW MARKETS VENTURE CAPITAL (âNMVCâ) PROGRAM NMVC Company's Noncompliance With Terms of Leverage Computation of Nmvc Company's Capital Impairment § 108.1830 NMVC Company's Capital Impairment definition and... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false NMVC Company's Capital Impairment...

  20. MAY THE HIGH-DEGREE SATISFYING UNREASONABLE REQUIREMENT ALSO MEANS THE GOOD QUALITY: FIVE BIG FLAWS IN THE SUBJECTIVE DEFINITION OF QUALITY AND THEIR SOLUTION

    Directory of Open Access Journals (Sweden)

    Runsheng Tu

    2011-06-01

    Full Text Available J. M. Juran's subjective quality definition of "quality is degree to which a set of inherent characteristics fulfils requirements" and the account have five big inherent problems: "to disturb the language order", "to violate the objective of the standardized work", "the dependence to the subjective being too strong, to disobey the objectivity principle", "to be short of the enthusiastic limit", "to be possible to reduce the requirement through the reduction, to improve the quality", "to be possible provides the reason theoretically for the fake and shoddy manufacturer and the person whose quality is bad", "to have the suspicion of circular definition". The method to treat the wound is establishing the definition of "quality is the positive degree". This definition of quality both has guaranteed the positive connotation of J. M. Juran's quality definition and has cured the flaws of J. M. Juran's quality definition, but also has promulgated the condition of the symmetry and the connection between quality and value.

  1. Impact of revising the National Nosocomial Infection Surveillance System definition for catheter-related bloodstream infection in ICU: reproducibility of the National Healthcare Safety Network case definition in an Australian cohort of infection control professionals.

    Science.gov (United States)

    Worth, Leon J; Brett, Judy; Bull, Ann L; McBryde, Emma S; Russo, Philip L; Richards, Michael J

    2009-10-01

    Effective and comparable surveillance for central venous catheter-related bloodstream infections (CLABSIs) in the intensive care unit requires a reproducible case definition that can be readily applied by infection control professionals. Using a questionnaire containing clinical cases, reproducibility of the National Nosocomial Infection Surveillance System (NNIS) surveillance definition for CLABSI was assessed in an Australian cohort of infection control professionals participating in the Victorian Hospital Acquired Infection Surveillance System (VICNISS). The same questionnaire was then used to evaluate the reproducibility of the National Healthcare Safety Network (NHSN) surveillance definition for CLABSI. Target hospitals were defined as large metropolitan (1A) or other large hospitals (non-1A), according to the Victorian Department of Human Services. Questionnaire responses of Centers for Disease Control and Prevention NHSN surveillance experts were used as gold standard comparator. Eighteen of 21 eligible VICNISS centers participated in the survey. Overall concordance with the gold standard was 57.1%, and agreement was highest for 1A hospitals (60.6%). The proportion of congruently classified cases varied according to NNIS criteria: criterion 1 (recognized pathogen), 52.8%; criterion 2a (skin contaminant in 2 or more blood cultures), 83.3%; criterion 2b (skin contaminant in 1 blood culture and appropriate antimicrobial therapy instituted), 58.3%; non-CLABSI cases, 51.4%. When survey questions regarding identification of cases of CLABSI criterion 2b were removed (consistent with the current NHSN definition), overall percentage concordance increased to 62.5% (72.2% for 1A centers). Further educational interventions are required to improve the discrimination of primary and secondary causes of bloodstream infection in Victorian intensive care units. Although reproducibility of the CLABSI case definition is relatively poor, adoption of the revised NHSN definition

  2. Requirements for VICTORIA Class Fire Control System: Contact Management Function

    Science.gov (United States)

    2014-07-01

    Requirements for VICTORIA Class Fire Control System Contact Management Function Tab Lamoureux CAE Integrated Enterprise Solutions...Contract Report DRDC-RDDC-2014-C190 July 2014 © Her Majesty the Queen in Right of Canada, as represented by the...i Abstract …….. The VICTORIA Class Submarines (VCS) are subject to a continuing program of technical upgrades. One such program is

  3. Definitive Radiotherapy for Ewing Tumors of Extremities and Pelvis: Long-Term Disease Control, Limb Function, and Treatment Toxicity

    International Nuclear Information System (INIS)

    Indelicato, Daniel J.; Keole, Sameer R.; Shahlaee, Amir H.; Shi Wenyin; Morris, Christopher G.; Marcus, Robert B.

    2008-01-01

    Purpose: More than 70% of Ewing tumors occur in the extremities and pelvis. This study identified factors influencing local control and functional outcomes after management with definitive radiotherapy (RT). Patients and Methods: A total of 75 patients with a localized Ewing tumor of the extremity or pelvis were treated with definitive RT at the University of Florida between 1970 and 2006 (lower extremity tumors in 30, pelvic tumors in 26, and upper extremity tumors in 19). RT was performed on a once-daily (40%) or twice-daily (60%) basis. The median dose was 55.2 Gy in 1.8-Gy daily fractions or 55.0 Gy in 1.2-Gy twice-daily fractions. The median observed follow-up was 4.7 years. Functional outcome was assessed using the Toronto Extremity Salvage Score. Results: The 10-year actuarial overall survival, cause-specific survival, freedom from relapse, and local control rate was 48%, 48%, 42%, and 71%, respectively. Of the 72 patients, 3 required salvage amputation. Inferior cause-specific survival was associated with larger tumors (81% for tumors 3 . Conclusions: Limb preservation was effectively achieved through definitive RT. Treating limited field sizes with hyperfractionated high-energy RT could minimize long-term complications and provides superior functional outcomes

  4. Methionine Uptake and Required Radiation Dose to Control Glioblastoma

    Energy Technology Data Exchange (ETDEWEB)

    Iuchi, Toshihiko, E-mail: tiuchi@chiba-cc.jp [Division of Neurological Surgery, Chiba Cancer Center, Chiba (Japan); Hatano, Kazuo [Division of Radiation Oncology, Tokyo Bay Advanced Imaging and Radiation Oncology Clinic, Makuhari, Chiba (Japan); Uchino, Yoshio [Division of Nuclear Medicine, Chiba Ryogo Center, Chiba (Japan); Itami, Makiko [Division of Surgical Pathology, Chiba Cancer Center, Chiba (Japan); Hasegawa, Yuzo; Kawasaki, Koichiro; Sakaida, Tsukasa [Division of Neurological Surgery, Chiba Cancer Center, Chiba (Japan); Hara, Ryusuke [Division of Radiation Oncology, Chiba Cancer Center, Chiba (Japan)

    2015-09-01

    Purpose: The purpose of this study was to retrospectively assess the feasibility of radiation therapy planning for glioblastoma multiforme (GBM) based on the use of methionine (MET) positron emission tomography (PET), and the correlation among MET uptake, radiation dose, and tumor control. Methods and Materials: Twenty-two patients with GBM who underwent MET-PET prior to radiation therapy were enrolled. MET uptake in 30 regions of interest (ROIs) from 22 GBMs, biologically effective doses (BEDs) for the ROIs and their ratios (MET uptake:BED) were compared in terms of whether the ROIs were controlled for >12 months. Results: MET uptake was significantly correlated with tumor control (odds ratio [OR], 10.0; P=.005); however, there was a higher level of correlation between MET uptake:BED ratio and tumor control (OR, 40.0; P<.0001). These data indicated that the required BEDs for controlling the ROIs could be predicted in terms of MET uptake; BED could be calculated as [34.0 × MET uptake] Gy from the optimal threshold of the MET uptake:BED ratio for tumor control. Conclusions: Target delineation based on MET-PET was demonstrated to be feasible for radiation therapy treatment planning. MET-PET could not only provide precise visualization of infiltrating tumor cells but also predict the required radiation doses to control target regions.

  5. Capacitor requirements for controlled thermonuclear experiments and reactors

    International Nuclear Information System (INIS)

    Boicourt, G.P.; Hoffman, P.S.

    1975-01-01

    Future controlled thermonuclear experiments as well as controlled thermonuclear reactors will require substantial numbers of capacitors. The demands on these units are likely to be quite severe and quite different from the normal demands placed on either present energy storage capacitors or present power factor correction capacitors. It is unlikely that these two types will suffice for all necessary Controlled Thermonuclear Research (CTR) applications. The types of capacitors required for the various CTR operating conditions are enumerated. Factors that influence the life, cost and operating abilities of these types of capacitors are discussed. The problems of capacitors in a radiation environment are considered. Areas are defined where future research is needed. Some directions that this research should take are suggested. (U.S.)

  6. Capacitor requirements for controlled thermonuclear experiments and reactors

    International Nuclear Information System (INIS)

    Boicourt, G.P.; Hoffman, P.S.

    1975-01-01

    Future controlled thermonuclear experiments as well as controlled thermonuclear reactors will require substantial numbers of capacitors. The demands on these units are likely to be quite severe and quite different from the normal demands placed on either present energy storage capacitors or present power factor correction capacitors. It is unlikely that these two types will suffice for all necessary Controlled Thermonuclear Research (CTR) applications. The types of capacitors required for the various CTR operating conditions are enumerated. Factors that influence the life, cost and operating abilities of these types of capacitors are discussed. The problems of capacitors in a radiation environment are considered. Areas are defined where future research is needed. Some directions that this research should take are suggested

  7. Features of course definition system control for a mode of preliminary bringing to horizon

    Directory of Open Access Journals (Sweden)

    О.А. Сущенко

    2004-03-01

    Full Text Available  The features of course definition system consisting of   platform in gimbal suspension, tuned rotor gyroscopes and pendulous accelerometers for a mode of preliminary bringing to horizon are reviewed. The mathematical description of the mode of preliminary bringing to horizon is derived and the appropriate control moments are determined.

  8. Definition of an emotion-based controller for dynamical systems

    Directory of Open Access Journals (Sweden)

    José Danilo Rairán Antolines

    2012-09-01

    Full Text Available An enormous number of solutions have been proposed from the field of artificial intelligence in order to endow machines with the ability to make plans without human guidance. In this paper, we suggest emulated emotions to endow machines with the skills to make human-like decisions. The model is described using dynamical systems. Emotional states are defined in terms of the difference between a reference model and the trajectories of the system. For example, calmness is defined as the ideal emotional state, where there is agreement between the state of the system and the reference model. Finally, a basic architecture for this kind of emotional-based controller is provided together with some experimental results that illustrate its use.

  9. Detector Control System for an LHC experiment - User Requirements Document

    CERN Document Server

    CERN. Geneva

    1997-01-01

    The purpose of this document is to provide the user requirements for a detector control system kernel for the LHC experiments following the ESA standard PSS-05 [1]. The first issue will be used to provide the basis for an evaluation of possible development philosophies for a kernel DCS. As such it will cover all the major functionality but only to a level of detail sufficient for such an evaluation to be performed. Many of the requirements are therefore intentionally high level and generic, and are meant to outline the functionality that would be required of the kernel DCS, but not yet to the level of the detail required for implementation. The document is also written in a generic fashion in order not to rule out any implementation technology.

  10. Requirements for active resistive wall mode (RWM) feedback control

    International Nuclear Information System (INIS)

    In, Y; Kim, J S; Chu, M S; Jackson, G L; La Haye, R J; Strait, E J; Liu, Y Q; Marrelli, L; Okabayashi, M; Reimerdes, H

    2010-01-01

    The requirements for active resistive wall mode (RWM) feedback control have been systematically investigated and established using highly reproducible current-driven RWMs in ohmic discharges in DIII-D. The unambiguous evaluation of active RWM feedback control was not possible in previous RWM studies primarily due to the variability of the onset of the pressure-driven RWMs; the stability of the pressure-driven RWM is thought to be sensitive to various passive stabilization mechanisms. Both feedback control specifications and physics requirements for RWM stabilization have been clarified using the current-driven RWMs in ohmic discharges, when little or no passive stabilization effects are present. The use of derivative gain on top of proportional gain is found to be advantageous. An effective feedback control system should be equipped with a power supply with bandwidth greater than the RWM growth rate. It is beneficial to apply a feedback field that is toroidally phase-shifted from the measured RWM phase in the same direction as the plasma current. The efficacy of the RWM feedback control will ultimately be determined by the plasma fluctuations on internal diagnostics, as well as on external magnetics. The proximity of the feedback coils to the plasma appears to be an important factor in determining the effectiveness of the RWM feedback coils. It is desirable that an RWM feedback control system simultaneously handles error field correction at a low frequency, along with direct RWM feedback at a high frequency. There is an indication of the influence of a second least stable RWM, which had been theoretically predicted but never identified in experiments. A preliminary investigation based on active MHD spectroscopic measurement showed a strong plasma response around 400 Hz where the typical plasma response associated with the first least stable RWM was expected to be negligible. Present active feedback control requirements are based on a single mode assumption, so the

  11. Design requirements for SRB production control system. Volume 2: System requirements and conceptual description

    Science.gov (United States)

    1981-01-01

    In the development of the business system for the SRB automated production control system, special attention had to be paid to the unique environment posed by the space shuttle. The issues posed by this environment, and the means by which they were addressed, are reviewed. The change in management philosphy which will be required as NASA switches from one-of-a-kind launches to multiple launches is discussed. The implications of the assembly process on the business system are described. These issues include multiple missions, multiple locations and facilities, maintenance and refurbishment, multiple sources, and multiple contractors. The implications of these aspects on the automated production control system are reviewed including an assessment of the six major subsystems, as well as four other subsystem. Some general system requirements which flow through the entire business system are described.

  12. US Export Controls and Technology Transfer Requirements: A UK Perspective

    Science.gov (United States)

    2010-05-01

    34 (La Franchi , 2006). Such requirements make it difficult for partners to participate and generate a large administrative burden on team members, who...if this critical impediment to enhanced cooperation is to be removed. The U.S. export control system is broken; its technology transfer rules ...Retrieved April 3, 2009, from http://www.jsf.mil/news/news2009.htm La Franchi , P. (2006, July 4). Australia demands JSF resolution. Flight International

  13. Assessing the variability of outcome for patients treated with localized prostate irradiation using different definitions of biochemical control

    International Nuclear Information System (INIS)

    Horwitz, Eric M.; Vicini, Frank A.; Ziaja, Ellen L.; Gonzalez, Jose; Dmuchowski, Carl F.; Stromberg, Jannifer S.; Brabbins, Donald S.; Hollander, Jay; Chen, Peter Y.; Martinez, Alvaro A.

    1996-01-01

    Purpose: Biochemical control using serial posttreatment serum prostate specific antigen (PSA) levels is being increasingly used to assess treatment efficacy for localized prostate cancer. However, no standardized definition of biochemical control has been established. We reviewed our experience treating patients with localized prostate cancer and applied three different commonly used definitions of biochemical control to determine if differences in therapeutic outcome would be observed. Methods and Materials: Between January 1987 and December 1991, 480 patients with clinically localized prostate cancer received external beam irradiation (RT) using localized prostate fields at William Beaumont Hospital. The median dose to the prostate was 66.6 Gy (range 58-70.4) using a four-field or arc technique. Pretreatment and posttreatment serum PSA levels were recorded. Over 86% (414 of 480) of patients had a pretreatment PSA level available. Three different definitions of biochemical control were used: (a) PSA nadir 20), and 5-year actuarial rates of biochemical control were calculated using the three biochemical control and one clinical local control definitions. For Group 1, 5-year actuarial rates of biochemical control were 84%, 90%, and 96% for Definitions 1-3 and clinical local control, respectively. For Group 2, 5-year actuarial control rates were 45%, 54%, 74%, and 92% for the four definitions, respectively. For Group 3, 5-year actuarial control rates were 26%, 31%, 63%, and 100% for the four definitions, respectively. For Group 4, 5-year actuarial control rates were 24%, 24%, 50%, and 100% for the four definitions, respectively. Finally, for Group 5, 5-year actuarial control rates were 5%, 14%, 15%, and 89% for the four definitions, respectively. Depending on the definition used, statistically significant differences overall in outcome rates were observed. Differences between all four definitions for all pairwise comparisons ranged from 5 to 53% (p < 0

  14. Solar Sail Models and Test Measurements Correspondence for Validation Requirements Definition

    Science.gov (United States)

    Ewing, Anthony; Adams, Charles

    2004-01-01

    Solar sails are being developed as a mission-enabling technology in support of future NASA science missions. Current efforts have advanced solar sail technology sufficient to justify a flight validation program. A primary objective of this activity is to test and validate solar sail models that are currently under development so that they may be used with confidence in future science mission development (e.g., scalable to larger sails). Both system and model validation requirements must be defined early in the program to guide design cycles and to ensure that relevant and sufficient test data will be obtained to conduct model validation to the level required. A process of model identification, model input/output documentation, model sensitivity analyses, and test measurement correspondence is required so that decisions can be made to satisfy validation requirements within program constraints.

  15. Wnt signaling controls the specification of definitive and primitive hematopoiesis from human pluripotent stem cells.

    Science.gov (United States)

    Sturgeon, Christopher M; Ditadi, Andrea; Awong, Geneve; Kennedy, Marion; Keller, Gordon

    2014-06-01

    Efforts to derive hematopoietic stem cells (HSCs) from human pluripotent stem cells (hPSCs) are complicated by the fact that embryonic hematopoiesis consists of two programs, primitive and definitive, that differ in developmental potential. As only definitive hematopoiesis generates HSCs, understanding how this program develops is essential for being able to produce this cell population in vitro. Here we show that both hematopoietic programs transition through hemogenic endothelial intermediates and develop from KDR(+)CD34(-)CD144(-) progenitors that are distinguished by CD235a expression. Generation of primitive progenitors (KDR(+)CD235a(+)) depends on stage-specific activin-nodal signaling and inhibition of the Wnt-β-catenin pathway, whereas specification of definitive progenitors (KDR(+)CD235a(-)) requires Wnt-β-catenin signaling during this same time frame. Together, these findings establish simple selective differentiation strategies for the generation of primitive or definitive hematopoietic progenitors by Wnt-β-catenin manipulation, and in doing so provide access to enriched populations for future studies on hPSC-derived hematopoietic development.

  16. San Juan National Forest Land Management Planning Support System (LMPSS) requirements definition

    Science.gov (United States)

    Werth, L. F. (Principal Investigator)

    1981-01-01

    The role of remote sensing data as it relates to a three-component land management planning system (geographic information, data base management, and planning model) can be understood only when user requirements are known. Personnel at the San Juan National Forest in southwestern Colorado were interviewed to determine data needs for managing and monitoring timber, rangelands, wildlife, fisheries, soils, water, geology and recreation facilities. While all the information required for land management planning cannot be obtained using remote sensing techniques, valuable information can be provided for the geographic information system. A wide range of sensors such as small and large format cameras, synthetic aperture radar, and LANDSAT data should be utilized. Because of the detail and accuracy required, high altitude color infrared photography should serve as the baseline data base and be supplemented and updated with data from the other sensors.

  17. An evaluation model for the definition of regulatory requirements on spent fuel pool cooling systems

    International Nuclear Information System (INIS)

    Izquierdo, J.M.

    1979-01-01

    A calculation model is presented for establishing regulatory requirements in the SFPCS System. The major design factors, regulatory and design limits and key parameters are discussed. A regulatory position for internal use is proposed. Finally, associated problems and experience are presented. (author)

  18. 9 CFR 590.544 - Spray process powder; definitions and requirements.

    Science.gov (United States)

    2010-01-01

    ... requirements. 590.544 Section 590.544 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE... removed from the primary or main drying chamber while the drying unit is in operation. (2) Secondary... bag collector chamber while the drying unit is in operation. (3) Sweep-down powder is that powder...

  19. 78 FR 79602 - Definitions and Reporting Requirements for Shareholders of Passive Foreign Investment Companies...

    Science.gov (United States)

    2013-12-31

    ... made elections under section 1295 or 1296 with respect to the PFIC stock, generally are required to... regimes for shareholders that own stock of a PFIC: (i) the excess distribution rules under section 1291... mark to market (``MTM'') rules under section 1296. In general, section 1291 imposes a special tax and...

  20. [Technological innovations in radiation oncology require specific quality controls].

    Science.gov (United States)

    Lenaerts, E; Mathot, M

    2014-01-01

    During the last decade, the field of radiotherapy has benefited from major technological innovations and continuously improving treatment efficacy, comfort and safety of patients. This mainly concerns the imaging techniques that allow 4D CT scan recording the respiratory phases, on-board imaging on linear accelerators that ensure perfect positioning of the patient for treatment and irradiation techniques that reduce very significantly the duration of treatment sessions without compromising quality of the treatment plan, including IMRT (Intensity Modulated Radiation Therapy) and VMAT (Volumetric Modulated Arc therapy). In this context of rapid technological change, it is the responsibility of medical physicists to regularly and precisely monitor the perfect functioning of new techniques to ensure patient safety. This requires the use of specific quality control equipment best suited to these new techniques. We will briefly describe the measurement system Delta4 used to control individualized treatment plan for each patient treated with VMAT technology.

  1. Toward a better definition of massive transfusion: focus on the interval of hemorrhage control.

    Science.gov (United States)

    Sharpe, John P; Weinberg, Jordan A; Magnotti, Louis J; Croce, Martin A; Fabian, Timothy C

    2012-12-01

    In clinical research, massive transfusion (MT) is commonly defined as transfusion of 10 or more red blood cell (RBC) units within 24 hours. However, the clinical relevance of this definition remains poorly understood. In this study, we evaluated whether patients who reach the MT threshold during hemorrhage control differ clinically from those who reach it after hemorrhage control (i.e., after intensive care unit [ICU] arrival) but before 24 hours. Prospective data were collected on all Level I trauma resuscitations within 5.5 years. Patients transfused 10 or more RBCs in the first 24 hours of hospitalization were identified and stratified according to when the MT threshold was achieved: before ICU arrival (Pre-ICU) versus after ICU arrival but before 24 hours of hospitalization (Post-ICU). Clinical characteristics between groups were compared. Three hundred five patients received 10 or more units before ICU arrival, and 46 reached the MT threshold after ICU arrival but before 24 hours. Both groups were clinically similar with respect to age, sex, and Injury Severity Score, but the Post-ICU group had a larger proportion of blunt injuries (71 vs. 53%, p definition. However, they have a significantly decreased mortality risk at 24 hours and the potential to dilute the study cohort. For research purposes, restricting the MT definition to 10 or more RBCs during hemorrhage control may result in study cohorts with relatively more uniform mortality risks. Prognostic study, level II.

  2. Mediastinoscope-controlled parasternal fenestration of the pericardium: definitive surgical palliation of malignant pericardial effusion

    Directory of Open Access Journals (Sweden)

    Toth Imre

    2012-06-01

    Full Text Available Abstract Background The tumorous infiltration or carcinosis of the pericardium could cause pericardial effusion in up to one-third of cases of malignancy, thus potentially interfere with the otherwise desirable oncological treatment. The existing surgical methods for the management of pericardial fluid are well-established but are not without limitations in the symptomatic relief of malignant pericardial effusion (MPE. The recurrence rate ranges between 43 and 69% after pericardiocentesis and 9 to 16% after pericardial drainage. The desire to overcome relative limitations of the existing methods led us to explore an alternative approach. Methods The standard armamentarium of the Carlens collar mediastinoscopy procedure was utilized in a Chamberlain parasternal approach of the pericardial sac. The laterality of approach was decided based upon the pleural involvement, as tumor-free pericardiopleural reflection is required. A pericardio-pleural window at least 3 cm in diameter was created. From January 2000 to December 2009, 22 cases were operated on with mediastinoscope-controlled parasternal fenestration (MCPF. Considering the type of the primary tumor, there were 11 lung cancer, 6 breast cancers, 2 haematologic malignancies and in 3 patients the origin of malignancy could not be verified. Results There were no operative deaths. We lost one patient (4.5% in the postoperative hospital period. All of the surviving patients had a minimum of 2 months of symptom-free survival. We detected transient recurrence of MPE in one patient (4.5% 14 days after the MCPF, which disappeared spontaneously after 24 hours. Conclusion The MCPF offers a real alternative in certain cases of pericardial effusion. We recommend this method especially for the definitive surgical palliation of MPE.

  3. Prediction of Neck Dissection Requirement After Definitive Radiotherapy for Head-and-Neck Squamous Cell Carcinoma

    International Nuclear Information System (INIS)

    Thariat, Juliette; Ang, K. Kian; Allen, Pamela K.; Ahamad, Anesa; Williams, Michelle D.; Myers, Jeffrey N.; El-Naggar, Adel K.; Ginsberg, Lawrence E.; Rosenthal, David I.; Glisson, Bonnie S.; Morrison, William H.; Weber, Randal S.; Garden, Adam S.

    2012-01-01

    Background: This analysis was undertaken to assess the need for planned neck dissection in patients with a complete response (CR) of involved nodes after irradiation and to determine the benefit of a neck dissection in those with less than CR by tumor site. Methods: Our cohort included 880 patients with T1-4, N1-3M0 squamous cell carcinoma of the oropharynx, larynx, or hypopharynx who received treatment between 1994 and 2004. Survival curves were calculated by the Kaplan-Meier Method, comparisons of rates with the log–rank test and prognostic factors by Cox's proportional hazard model. Results: Nodal CR occurred in 377 (43%) patients, of whom 365 patients did not undergo nodal dissection. The 5-year actuarial regional control rate of patients with CR was 92%. Two hundred sixty-eight of the remaining patients (53%) underwent neck dissections. The 5-year actuarial regional control rate for patients without a CR was 84%. Those who had a neck dissection fared better with 5-year actuarial regional control rates of 90% and 76% for those operated and those not operated (p < 0.001). Variables associated with poorer regional control rates included higher T and N stage, non-oropharynx cancers, non-CR, both clinical and pathological. Conclusions: With 92% 5-year neck control rate without neck dissection after CR, there is little justification for systematic neck dissection. The addition of a neck dissection resulted in higher neck control after partial response though patients with viable tumor on pathology specimens had poorer outcomes. The identification of that subgroup that benefits from additional treatment remains a challenge.

  4. AAFE man-made noise experiment project. Volume 1: Introduction experiment definition and requirements

    Science.gov (United States)

    1974-01-01

    An experiment was conducted to measure and map the man-made radio frequency emanations which exist at earth orbital altitudes. The major objectives of the program are to develop a complete conceptual experiment and developmental hardware for the collection and processing of data required to produce meaningful statistics on man-made noise level variations as functions of time, frequency, and geographic location. A wide dispersion measurement receiver mounted in a spacecraft operating in a specialized orbit is used to obtain the data. A summary of the experiment designs goals and constraints is provided. The recommended orbit for the spacecraft is defined. The characteristics of the receiver and the antennas are analyzed.

  5. Material control and accounting requirements for uranium enrichment facilities

    International Nuclear Information System (INIS)

    Ting, P.

    1991-01-01

    This paper reports that the U.S. Nuclear Regulatory Commission has defined material control and accounting (MC and A) requirement for low-enriched uranium enrichment plants licensed under 10 CFR parts 40 and 70. Following detailed assessment of potential safeguards issues relevant to these facilities, a new MC and A rule was developed. The primary safeguards considerations are detection of the loss of special nuclear material, detection of clandestine production of special nuclear material of low strategic significance for unauthorized use or distribution, and detection of unauthorized production of uranium enriched to ≥10 wt % U-235. The primary safeguards concerns identified were the large absolute limit of error associated with the material balance closing, the inability to shutdown some uranium enrichment technologies to perform a cleanout inventory of the process system, and the flexibility of some of these technologies to produce higher enrichments. Unauthorized production scenarios were identified for some technologies that could circumvent the detection of the production and removal of 5 kilograms of U-235 as high-enriched uranium through conventional material control and accounting programs. Safeguards techniques, including the use of production and process control information, measurements, and technical surveillance, were identified to compensate for these concerns

  6. Risk based definition of TS requirements for NPPs with WWER-1000 type reactor

    International Nuclear Information System (INIS)

    Morozov, V.; Tokmachev, G.

    2000-01-01

    The main regulations in safety related maintenance for NPPs in Russia are defined as a part of Technical Specifications (TSs). It includes limiting conditions for operation (surveillance requirements, allowed outage time, et.). In Russian practice the two levels of TSs are presented: general TSs that have been established as a master documents for similar designed NPPs and plant specific based on operation practice of each NPP unit. This paper presents a brief review of submissions to TS changes for NPPs with WWER type reactor were issued by AEP PSA team since 1988 year. Besides it provides an approach allows to estimate the complex affect on plant risk for both Limiting Conditions of Operation (LCO) and Surveillance Test Intervals (STI) based on relevant probabilistic tool (Minimal Cut Sets method and Marcov Chains methods). (author)

  7. Definition of a Robust Supervisory Control Scheme for Sodium-Cooled Fast Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Ponciroli, R.; Passerini, S.; Vilim, R. B.

    2016-04-17

    In this work, an innovative control approach for metal-fueled Sodium-cooled Fast Reactors is proposed. With respect to the classical approach adopted for base-load Nuclear Power Plants, an alternative control strategy for operating the reactor at different power levels by respecting the system physical constraints is presented. In order to achieve a higher operational flexibility along with ensuring that the implemented control loops do not influence the system inherent passive safety features, a dedicated supervisory control scheme for the dynamic definition of the corresponding set-points to be supplied to the PID controllers is designed. In particular, the traditional approach based on the adoption of tabulated lookup tables for the set-point definition is found not to be robust enough when failures of the implemented SISO (Single Input Single Output) actuators occur. Therefore, a feedback algorithm based on the Reference Governor approach, which allows for the optimization of reference signals according to the system operating conditions, is proposed.

  8. GDP-L-fucose is required for boundary definition in plants.

    Science.gov (United States)

    Gonçalves, Beatriz; Maugarny-Calès, Aude; Adroher, Bernard; Cortizo, Millán; Borrega, Nero; Blein, Thomas; Hasson, Alice; Gineau, Emilie; Mouille, Grégory; Laufs, Patrick; Arnaud, Nicolas

    2017-12-16

    The CUP-SHAPED COTYLEDON (CUC) transcription factors control plant boundary formation, thus allowing the emergence of novel growth axes. While the developmental roles of the CUC genes in different organs and across species are well characterized, upstream and downstream events that contribute to their function are still poorly understood. To identify new players in this network, we performed a suppressor screen of CUC2g-m4, a line overexpressing CUC2 that has highly serrated leaves. We identified a mutation that simplifies leaf shape and affects MURUS1 (MUR1), which is responsible for GDP-L-fucose production. Using detailed morphometric analysis, we show that GDP-L-fucose has an essential role in leaf shape acquisition by sustaining differential growth at the leaf margins. Accordingly, reduced CUC2 expression levels are observed in mur1 leaves. Furthermore, genetic analyses reveal a conserved role for GDP-L-fucose in different developmental contexts where it contributes to organ separation in the same pathway as CUC2. Taken together, our results reveal that GDP-L-fucose is necessary for proper establishment of boundary domains in various developmental contexts. © The Author 2017. Published by Oxford University Press on behalf of the Society for Experimental Biology.

  9. Asterless is required for centriole length control and sperm development

    Science.gov (United States)

    Galletta, Brian J.; Jacobs, Katherine C.; Fagerstrom, Carey J.

    2016-01-01

    Centrioles are the foundation of two organelles, centrosomes and cilia. Centriole numbers and functions are tightly controlled, and mutations in centriole proteins are linked to a variety of diseases, including microcephaly. Loss of the centriole protein Asterless (Asl), the Drosophila melanogaster orthologue of Cep152, prevents centriole duplication, which has limited the study of its nonduplication functions. Here, we identify populations of cells with Asl-free centrioles in developing Drosophila tissues, allowing us to assess its duplication-independent function. We show a role for Asl in controlling centriole length in germline and somatic tissue, functioning via the centriole protein Cep97. We also find that Asl is not essential for pericentriolar material recruitment or centrosome function in organizing mitotic spindles. Lastly, we show that Asl is required for proper basal body function and spermatid axoneme formation. Insights into the role of Asl/Cep152 beyond centriole duplication could help shed light on how Cep152 mutations lead to the development of microcephaly. PMID:27185836

  10. 21 CFR 111.127 - What quality control operations are required for packaging and labeling operations?

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false What quality control operations are required for... and Process Control System: Requirements for Quality Control § 111.127 What quality control operations are required for packaging and labeling operations? Quality control operations for packaging and...

  11. 21 CFR 111.130 - What quality control operations are required for returned dietary supplements?

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false What quality control operations are required for... and Process Control System: Requirements for Quality Control § 111.130 What quality control operations are required for returned dietary supplements? Quality control operations for returned dietary...

  12. 40 CFR 63.2252 - What are the requirements for process units that have no control or work practice requirements?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 12 2010-07-01 2010-07-01 true What are the requirements for process units that have no control or work practice requirements? 63.2252 Section 63.2252 Protection of... Pollutants: Plywood and Composite Wood Products General Compliance Requirements § 63.2252 What are the...

  13. Control of Antimicrobial Resistance Requires an Ethical Approach

    Directory of Open Access Journals (Sweden)

    Ben Parsonage

    2017-11-01

    Full Text Available Ethical behavior encompasses actions that benefit both self and society. This means that tackling antimicrobial resistance (AMR becomes an ethical obligation, because the prospect of declining anti-infectives affects everyone. Without preventive action, loss of drugs that have saved lives over the past century, will condemn ourselves, people we know, and people we don’t know, to unacceptable risk of untreatable infection. Policies aimed at extending antimicrobial life should be considered within an ethical framework, in order to balance the choice, range, and quality of drugs against stewardship activities. Conserving availability and effectiveness for future use should not compromise today’s patients. Practices such as antimicrobial prophylaxis for healthy people ‘at risk’ should receive full debate. There are additional ethical considerations for AMR involving veterinary care, agriculture, and relevant bio-industries. Restrictions for farmers potentially threaten the quality and quantity of food production with economic consequences. Antibiotics for companion animals do not necessarily spare those used for humans. While low-income countries cannot afford much-needed drugs, pharmaceutical companies are reluctant to develop novel agents for short-term return only. Public demand encourages over-the-counter, internet, black market, and counterfeit drugs, all of which compromise international control. Prescribers themselves require educational support to balance therapeutic choice against collateral damage to both body and environment. Predicted mortality due to AMR provides justification for international co-operation, commitment and investment to support surveillance and stewardship along with development of novel antimicrobial drugs. Ethical arguments for, and against, control of antimicrobial resistance strategies are presented and discussed in this review.

  14. Relationship between autonomic cardiovascular control, case definition, clinical symptoms, and functional disability in adolescent chronic fatigue syndrome: an exploratory study.

    Science.gov (United States)

    Wyller, Vegard B; Helland, Ingrid B

    2013-02-07

    Chronic Fatigue Syndrome (CFS) is characterized by severe impairment and multiple symptoms. Autonomic dysregulation has been demonstrated in several studies. We aimed at exploring the relationship between indices of autonomic cardiovascular control, the case definition from Centers for Disease Control and Prevention (CDC criteria), important clinical symptoms, and disability in adolescent chronic fatigue syndrome. 38 CFS patients aged 12-18 years were recruited according to a wide case definition (ie. not requiring accompanying symptoms) and subjected to head-up tilt test (HUT) and a questionnaire. The relationships between variables were explored with multiple linear regression analyses. In the final models, disability was positively associated with symptoms of cognitive impairments (p<0.001), hypersensitivity (p<0.001), fatigue (p=0.003) and age (p=0.007). Symptoms of cognitive impairments were associated with age (p=0.002), heart rate (HR) at baseline (p=0.01), and HR response during HUT (p=0.02). Hypersensitivity was associated with HR response during HUT (p=0.001), high-frequency variability of heart rate (HF-RRI) at baseline (p=0.05), and adherence to the CDC criteria (p=0.005). Fatigue was associated with gender (p=0.007) and adherence to the CDC criteria (p=0.04). In conclusion, a) The disability of CFS patients is not only related to fatigue but to other symptoms as well; b) Altered cardiovascular autonomic control is associated with certain symptoms; c) The CDC criteria are poorly associated with disability, symptoms, and indices of altered autonomic nervous activity.

  15. Minimum power requirement for environmental control of aircraft

    International Nuclear Information System (INIS)

    Ordonez, Juan Carlos; Bejan, Adrian

    2003-01-01

    This paper addresses two basic issues in the thermodynamic optimization of environmental control systems (ECS) for aircraft: realistic limits for the minimal power requirement, and design features that facilitate operation at minimal power consumption. Four models are proposed and optimized. In the first, the ECS operates reversibly, the air stream in the cabin is mixed to one temperature, and the cabin experiences heat transfer with the ambient, across its insulation. The cabin temperature is fixed. In the second model, the fixed cabin temperature is assigned to the internal solid surfaces of the cabin, and a thermal resistance separates these surfaces from the air mixed in the cabin. In the third model, the ECS operates irreversibly, based on the bootstrap air cycle. The fourth model combines the ECS features of the third model with the cabin-environment interaction features of the second model. It is shown that in all models the temperature of the air stream that the ECS delivers to the cabin can be optimized for operation at minimal power. The effect of other design parameters and flying conditions is documented. The optimized air delivery temperature is relatively insensitive to the complexity of the model; for example, it is insensitive to the size of the heat exchanger used in the bootstrap air cycle. This study adds to the view that robustness is a characteristic of optimized complex flow systems, and that thermodynamic optimization results can be used for orientation in the pursuit of more complex and realistic designs

  16. [Colonoscopy quality control as a requirement of colorectal cancer screening].

    Science.gov (United States)

    Quintero, Enrique; Alarcón-Fernández, Onofre; Jover, Rodrigo

    2013-11-01

    The strategies used in population-based colorectal screening strategies culminate in colonoscopy and consequently the success of these programs largely depends on the quality of this diagnostic test. The main factors to consider when evaluating quality are scientific-technical quality, safety, patient satisfaction, and accessibility. Quality indicators allow variability among hospitals, endoscopy units and endoscopists to be determined and can identify those not achieving recommended standards. In Spain, the working group for colonoscopy quality of the Spanish Society of Gastroenterology and the Spanish Society of Gastrointestinal Endoscopy have recently drawn up a Clinical Practice Guideline that contains the available evidence on the quality of screening colonoscopy, as well as the basic requirements that must be met by endoscopy units and endoscopists carrying out this procedure. The implementation of training programs and screening colonoscopy quality controls are strongly recommended to guarantee the success of population-based colorectal cancer screening. Copyright © 2013 Elsevier España, S.L. and AEEH y AEG. All rights reserved.

  17. National Institute of Justice Center Requirements Definition, Technical Assistance, Agile Test and Evaluation and Cyber Science Analysis

    National Research Council Canada - National Science Library

    Frantz, Frederick

    2003-01-01

    This task provided for assembly, definition, and completion of technical enhancements in coordination with the National Law Enforcement and Corrections Technology Center -Northeast Region (NLECTC-NE...

  18. Requirements for Scalable Access Control and Security Management Architectures

    National Research Council Canada - National Science Library

    Keromytis, Angelos D; Smith, Jonathan M

    2005-01-01

    Maximizing local autonomy has led to a scalable Internet. Scalability and the capacity for distributed control have unfortunately not extended well to resource access control policies and mechanisms...

  19. Definitions and methods of measuring and reporting on injurious falls in randomised controlled fall prevention trials: a systematic review

    Directory of Open Access Journals (Sweden)

    Schwenk Michael

    2012-04-01

    Full Text Available Abstract Background The standardisation of the assessment methodology and case definition represents a major precondition for the comparison of study results and the conduction of meta-analyses. International guidelines provide recommendations for the standardisation of falls methodology; however, injurious falls have not been targeted. The aim of the present article was to review systematically the range of case definitions and methods used to measure and report on injurious falls in randomised controlled trials (RCTs on fall prevention. Methods An electronic literature search of selected comprehensive databases was performed to identify injurious falls definitions in published trials. Inclusion criteria were: RCTs on falls prevention published in English, study population ≥ 65 years, definition of injurious falls as a study endpoint by using the terms "injuries" and "falls". Results The search yielded 2089 articles, 2048 were excluded according to defined inclusion criteria. Forty-one articles were included. The systematic analysis of the methodology applied in RCTs disclosed substantial variations in the definition and methods used to measure and document injurious falls. The limited standardisation hampered comparability of study results. Our results also highlight that studies which used a similar, standardised definition of injurious falls showed comparable outcomes. Conclusions No standard for defining, measuring, and documenting injurious falls could be identified among published RCTs. A standardised injurious falls definition enhances the comparability of study results as demonstrated by a subgroup of RCTs used a similar definition. Recommendations for standardising the methodology are given in the present review.

  20. National Ignition Facility system design requirements NIF integrated computer controls SDR004

    International Nuclear Information System (INIS)

    Bliss, E.

    1996-01-01

    This System Design Requirement document establishes the performance, design, development, and test requirements for the NIF Integrated Computer Control System. The Integrated Computer Control System (ICCS) is covered in NIF WBS element 1.5. This document responds directly to the requirements detailed in the NIF Functional Requirements/Primary Criteria, and is supported by subsystem design requirements documents for each major ICCS Subsystem

  1. 21 CFR 111.135 - What quality control operations are required for product complaints?

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false What quality control operations are required for... MANUFACTURING, PACKAGING, LABELING, OR HOLDING OPERATIONS FOR DIETARY SUPPLEMENTS Production and Process Control System: Requirements for Quality Control § 111.135 What quality control operations are required for...

  2. Assessing the variability of outcome for patients treated with localized prostate irradiation using different definitions of biochemical control

    International Nuclear Information System (INIS)

    Horwitz, Eric; Ziaja, Ellen; Vicini, Frank; Dmuchowski, Carl; Gonzalez, Jose; Stromberg, Jannifer; Brabbins, Donald; Hollander, Jay; Chen, Peter; Martinez, Alvaro

    1995-01-01

    Purpose: Biochemical control is rapidly becoming the standard to assess treatment outcome of clinically localized prostate cancer. However, no standardized definition of biochemical control has been established. We reviewed our experience treating patients with localized prostate cancer and applied 3 different commonly used definitions to estimate the variability in rates of biochemical control. Materials and Methods: Between (1(87)) and (12(91)), 480 patients with clinically localized prostate cancer received uniform treatment with external beam irradiation (RT) using localized prostate fields at William Beaumont Hospital. The median dose to the prostate was 66.6 Gy (range 58 to 70.4 Gy) through a 4 field technique. A total of 14 patients received pelvic nodal RT (median dose 45 Gy). Four hundred seventy patients had post-treatment (posttx) PSA values and 414 patients had pre-treatment (pretx) PSA values. Three different definitions of biochemical control were used: 1) Biochemical control was defined as posttx PSA nadir < 1 ng/ml within 1 year. After achieving nadir, if there were 2 consecutive increases, the patient was scored a failure at the time of the first increase; 2) Biochemical control was defined as posttx PSA nadir < 1.5 ng/ml within 1 year. After achieving nadir, if there were 2 consecutive increases, the patient was scored a failure at the time of the first increase; 3) Posttx PSA nadir < 4 ng/ml without a time limit. Once the nadir was achieved, and it did not rise above normal, the patient was considered controlled. Clinical local control was defined as no palpable prostate nodularity beyond 18 months, no new prostate nodularity, or a negative biopsy. If hormonal therapy was started, the patient was censored for biochemical failure at that time. Results: Median follow-up is 48 months (range 3 to 112 months). Pre-treatment PSA values were correlated with biochemical response using the 3 definitions of biochemical control as well as clinical local

  3. ECT DAMAGE INDICATES STM DIVIDED INTO STM CONTROL & LTM TRACES: NEUROLOGICAL DEFINITION OF “CONFUSION”

    Directory of Open Access Journals (Sweden)

    Eugen Tarnow

    2017-12-01

    Full Text Available Recently it was shown that short term memory (STM free recall consists of two stages: the first few recalls empty working memory and a second stage, a reactivation stage, concludes the recall (Tarnow, 2015; for a review of the theoretical predictions see Murdock, 1974. Bayley et al (2000 investigated free recall in people who had undergone Electroconvulsive therapy (ECT and found that both recency and primacy effects were normal. Here I investigate this further, and argue that this finding suggests a division of STM between STM Control and long term memory (LTM traces and that STM Control is not effected by ECT.Serial position probabilities from an investigation of Bayley et al (2000 were used to compare 11 subjects with ECT treatments to a control group and to a group of Alzheimer’s subjects.The free recall probabilities are found to be separable into the serial position curves and the overall probability of recall. This suggests that STM is separable into an STM Control structure (the serial position curve responsible for working memory and reactivation functions and LTM traces (the overall probability of recall.Using the ECT review of Abbott et al (2014a showing excess activity in MTL and lacking activity in the frontal lobes I suggest that STM Control is overworked trying to establish stable patterns in LTM. It could be that the confusion resulting from ECT is due to the failure of this process, suggesting a neurological definition of confusion.

  4. Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices

    International Nuclear Information System (INIS)

    2007-01-01

    This part of ISO 11135 describes requirements that, if met, will provide an ethylene oxide sterilization process intended to sterilize medical devices, which has appropriate microbicidal activity. Furthermore, compliance with the requirements ensures that this activity is both reliable and reproducible so that it can be predicted, with reasonable confidence, that there is a low level of probability of there being a viable microorganism present on product after sterilization. Specification of this probability is a matter for regulatory authorities and may vary from country to country. The paper provides information on scope, normative references, terms and definitions, quality management systems, sterilizing agent characterization, process and equipment characterization, product definition, process definition, validation, routine monitoring and control, product release from sterilization and maintaining process effectiveness followed by Annex A (Determination of lethal rate of the sterilization process - Biological indicator/bioburden approach), Annex B (Conservative determination of lethal rate of the sterilization process - Overkill approach, annex C (General guidance) and a bibliography.

  5. Dosimetry control for radiation processing - basic requirements and standards

    International Nuclear Information System (INIS)

    Ivanova, M.; Tsrunchev, Ts.

    2004-01-01

    A brief review of the basic international codes and standards for dosimetry control for radiation processing (high doses dosimetry), setting up a dosimetry control for radiation processing and metrology control of the dosimetry system is made. The present state of dosimetry control for food processing and the Bulgarian long experience in food irradiation (three irradiation facilities are operational at these moment) are presented. The absence of neither national standard for high doses nor accredited laboratory for calibration and audit of radiation processing dosimetry systems is also discussed

  6. Assessment of tumor control following definitive radiotherapy in carcinoma of the prostate: A continuing dilemma

    International Nuclear Information System (INIS)

    Pilepich, M.V.

    1987-01-01

    Evaluation of tumor response and tumor control after definitive radiotherapy is a relatively simple task in most malignancies arising at sites amenable to clinical examination (inspection and palpation). The rates of tumor regression following irradiation are quite variable. While some types of cancer regress completely during the radiotherapy course, some may take weeks or months to resolve. Occasionally, residual induration or a residual mass may persist for prolonged periods (many months), prompting the clinician to consider a biopsy for evaluation of the tumor status. In these circumstances histological examination may show necrotic tumor or residual fibrotic tissue. Finding viable-appearing tumor cells beyond the immediate postirradiation period (several weeks to a few months after completion of the radiotherapy course) is generally accepted as an equivalent of failure to eradicate the tumor. However, in a few types of cancer, presence of histologically identifiable and apparently viable tumor cells over protracted periods does not necessarily imply treatment failure

  7. 30 CFR 250.462 - What are the requirements for well-control drills?

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What are the requirements for well-control... Other Drilling Requirements § 250.462 What are the requirements for well-control drills? You must conduct a weekly well-control drill with each drilling crew. Your drill must familiarize the crew with its...

  8. 21 CFR 111.315 - What are the requirements for laboratory control processes?

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false What are the requirements for laboratory control... MANUFACTURING, PACKAGING, LABELING, OR HOLDING OPERATIONS FOR DIETARY SUPPLEMENTS Production and Process Control System: Requirements for Laboratory Operations § 111.315 What are the requirements for laboratory control...

  9. Ergonomic requirements to control room design - evaluation method

    International Nuclear Information System (INIS)

    Hinz, W.

    1985-01-01

    The method of evaluation introduced is the result of work carried out by the sub-committee 'Control Room Design' of the Engineering Standards Committee in DIN Standards, Ergonomy. This committee compiles standards for the design of control rooms (instrumentation and control) for the monitoring and operation of process engineering cycles. With the agreement of the committee - whom we wish to take the opportunity of thanking at this point for their constructive collaboration - a planned partial standard will be introduced thematically in the following, in order that knowledge gained from the discussion can be included in further work on the subject. The matter in question is a procedure for the qualitative evaluation of the duties to be performed under the control of operators in order that an assessment can be made of existing control concepts or such concepts as are to be found in the draft phase. (orig./GL) [de

  10. 49 CFR 236.205 - Signal control circuits; requirements.

    Science.gov (United States)

    2010-10-01

    ..., INSPECTION, MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Automatic... car, (b) When points of a switch are not closed in proper position, (c) When an independently operated...

  11. Executive control and faithfulness: only long-term romantic relationships require prefrontal control.

    Science.gov (United States)

    Ueda, Ryuhei; Yanagisawa, Kuniaki; Ashida, Hiroshi; Abe, Nobuhito

    2018-03-01

    Individuals in the early stages of a romantic relationship generally express intense passionate love toward their partners. This observation allows us to hypothesize that the regulation of interest in extra-pair relationships by executive control, which is supported by the function of the prefrontal cortex, is less required in individuals in the early stages of a relationship than it is in those who are in a long-term relationship. To test this hypothesis, we asked male participants in romantic relationships to perform a go/no-go task during functional magnetic resonance imaging (fMRI), which is a well-validated task that can measure right ventrolateral prefrontal cortex (VLPFC) activity implicated in executive control. Subsequently, the participants engaged in a date-rating task in which they rated how much they wanted to date unfamiliar females. We found that individuals with higher right VLPFC activity better regulated their interest in dates with unfamiliar females. Importantly, this relationship was found only in individuals with long-term partners, but not in those with short-term partners, indicating that the active regulation of interest in extra-pair relationships is required only in individuals in a long-term relationship. Our findings extend previous findings on executive control in the maintenance of monogamous relationships by highlighting the role of the VLPFC, which varies according to the stage of the romantic relationship.

  12. Required accuracy of tune measurement and parametrization of chromaticity control

    International Nuclear Information System (INIS)

    Maas, R.

    1991-02-01

    The betatron tunes v x and v y will be measured by Fourier-analyzing a BPM signal generated by a beam which received a fast ( kick /f rev ) equals the fractional part of the tune, a beam blow-up can be observed. In this note the required accuracy of such a tune measurement is discussed. (author). 6 schemes

  13. 75 FR 80066 - Quality Control Requirements for Direct Endorsement Lenders; Notice of Proposed Information...

    Science.gov (United States)

    2010-12-21

    ... DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT [Docket No. FR-5380-N-50] Quality Control Requirements... information: Title of Proposal: Quality Control Requirements for Direct Endorsement Lenders. OMB Control... a result, DE lenders will be responsible for conducting quality control on TPO originations of FHA...

  14. 21 CFR 111.65 - What are the requirements for quality control operations?

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false What are the requirements for quality control... Process Control System § 111.65 What are the requirements for quality control operations? You must implement quality control operations in your manufacturing, packaging, labeling, and holding operations for...

  15. Satisfying regulatory and accreditation requirements for quality control.

    Science.gov (United States)

    Ehrmeyer, Sharon S

    2013-03-01

    The Clinical Laboratory Improvement Amendments of 1988 (CLIA) requires all US clinical laboratories that test "materials derived from the human body for the purpose of providing information for the diagnosis, prevention, or treatment of any disease..." to be regulated. The CLIA mandates are site neutral; based on test complexity; and focus on the three phases of the testing process (preanalytical, analytical, and postanalytical). Many testing sites choose to meet the CLIA requirements by following the testing standards of a professional accreditation organization deemed by the Centers for Medicare and Medicaid Services. The three principal organizations are The Joint Commission, the College of American Pathologists, and COLA. Copyright © 2013 Elsevier Inc. All rights reserved.

  16. Requirements for Control Room Computer-Based Procedures for use in Hybrid Control Rooms

    Energy Technology Data Exchange (ETDEWEB)

    Le Blanc, Katya Lee [Idaho National Lab. (INL), Idaho Falls, ID (United States); Oxstrand, Johanna Helene [Idaho National Lab. (INL), Idaho Falls, ID (United States); Joe, Jeffrey Clark [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-05-01

    Many plants in the U.S. are currently undergoing control room modernization. The main drivers for modernization are the aging and obsolescence of existing equipment, which typically results in a like-for-like replacement of analogue equipment with digital systems. However, the modernization efforts present an opportunity to employ advanced technology that would not only extend the life, but enhance the efficiency and cost competitiveness of nuclear power. Computer-based procedures (CBPs) are one example of near-term advanced technology that may provide enhanced efficiencies above and beyond like for like replacements of analog systems. Researchers in the LWRS program are investigating the benefits of advanced technologies such as CBPs, with the goal of assisting utilities in decision making during modernization projects. This report will describe the existing research on CBPs, discuss the unique issues related to using CBPs in hybrid control rooms (i.e., partially modernized analog control rooms), and define the requirements of CBPs for hybrid control rooms.

  17. 46 CFR 164.019-13 - Production quality control requirements.

    Science.gov (United States)

    2010-10-01

    ... establish procedures for maintaining quality control of the materials used in production, manufacturing... place of manufacture unless alternate procedures have been accepted by the Commandant. (c) Production... manufactured. A new lot must be started whenever any change is made in materials, design, or production method...

  18. 14 CFR 417.303 - Command control system requirements.

    Science.gov (United States)

    2010-01-01

    ... system must transmit a command signal that has the radio frequency characteristics and power needed for.... (c) Reliability prediction. A command control system must have a predicted reliability of 0.999 at... for each launch. Any demonstration of the system's predicted reliability must satisfy § 417.309(b). (d...

  19. 40 CFR 85.1402 - Definitions.

    Science.gov (United States)

    2010-07-01

    ... POLLUTION FROM MOBILE SOURCES Urban Bus Rebuild Requirements § 85.1402 Definitions. The definitions of this..., state, city department, or private or public entity controlling the use of one or more urban buses... part means a part present in or on an engine at the time an urban bus is originally sold to the...

  20. Severe hepatic trauma: nonoperative management, definitive repair, or damage control surgery?

    Science.gov (United States)

    Leppäniemi, Ari K; Mentula, Panu J; Streng, Mari H; Koivikko, Mika P; Handolin, Lauri E

    2011-12-01

    Management of severe liver injuries has evolved to include the options for nonoperative management and damage control surgery. The present study analyzes the criteria for choosing between nonoperative management and early surgery, and definitive repair versus damage control strategy during early surgery. In a retrospective analysis of 144 patients with severe (AAST grade III-V) liver injuries (94% blunt trauma), early laparotomy was performed in 50 patients. Initial management was nonoperative in 94 blunt trauma patients with 8 failures. Uni- and multivariate analyses were used to calculate predictor odds ratios (OR) with 95% confidence intervals (CI). Factors associated with early laparotomy in blunt trauma included shock on admission, associated grade IV-V splenic injury, grade IV-V head injury, and grade V liver injury. Only shock was an independent predictor (OR, 26.1; 95% CI, 8.9-77.1; P < 0.001). The presence of a grade IV-V splenic injury predicted damage control strategy (OR infinite; P = 0.021). Failed nonoperative management was associated with grade IV-V splenic injury (OR, 14.00; 95% CI, 1.67-117.55), and shock (OR, 6.82; 95% CI, 1.49-31.29). The hospital mortality rate was 15%; 8 of 21 deaths were liver-related. Shock (OR, 9.3; 95% CI, 2.4-35.8; P = 0.001) and severe head injury (OR, 9.25; 95% CI, 3.0-28.9; P = 0.000) were independent predictors for mortality. In patients with severe liver injury, associated severe splenic injury favors early laparotomy and damage control strategy. Patients who arrive in shock or have an associated severe splenic injury should not be managed nonoperatively. In addition to severe head injury, uncontrollable bleeding from the liver injury is still a major cause of early death.

  1. Detailed requirements and constraints for the control of flexibility

    DEFF Research Database (Denmark)

    Hänninen, Seppo; Kyritsis, Anastasios; Abdulhadi, Ibrahim

    2015-01-01

    between day-ahead production and consumption schedule and will leave energy markets with higher and less predictable need for balancing power. The actors involved in the future grid control are balance responsible Party (BRP), cell system operator (CSO), cell operational information system (COIS...... and voltage control now and in the future. Regarding the flexibility of electricity generation, gas turbines and other heat motors as reciprocating engines can be started quickest. The speed of power change is clearly the highest for heat motors and their minimum power is low. Also steam and combined heat...... and power plants can be utilised in the relatively quick increasing of the electricity generation. Slower power changes are possible also with the nuclear power but they cannot be carried out continuously. The regulation characteristics of hydro power are superb in comparison to the other electricity...

  2. Design requirements for SRB production control system. Volume 4: Implementation

    Science.gov (United States)

    1981-01-01

    The implementation plan which is presented was developed to provide the means for the successful implementation of the automated production control system. There are three factors which the implementation plan encompasses: detailed planning; phased implementation; and user involvement. The plan is detailed to the task level in terms of necessary activities as the system is developed, refined, installed, and tested. These tasks are scheduled, on a preliminary basis, over a two-and-one-half-year time frame.

  3. Quality control in PET/CT systems. Experiences and requirements

    International Nuclear Information System (INIS)

    Geworski, Lilli; Fitz, Eduard; Knoop, Bernd; Karwarth, Cornelia; Plotkin, Michail

    2010-01-01

    Today, in most cases PET examinations are performed using PET/CT hybrid systems. While acceptance testing and routine control of the basic modalities PET and CT, respectively, are described by appropriate regulations, corresponding instructions with regard to the interface connecting both are still missing. This interface includes the adjustment of gantries and patient bed to each other as well as the energy scaling of attenuation coefficients from CT energy to 511 keV. Measurements checking the mechanical adjustment (determination of off-set parameters) are performed following manufacturer's recommendation, with a typical frequency twice a year. On a Biograph 16 (Siemens, Inc.), these measurements were systematically extended to a weekly frequency over an observation period of 10 months, supplemented by measurements with additional load to the patient bed (up to 135 kg), and different vertical bed positions. The results show, that for the construction tested additional off-set measurements for routine control extending well beyond manufacturer's recommendation are not necessary. The energy scaling of attenuation coefficients is depending on methodological aspects and software implementation, and therefore is not part of routine control. On the contrary, the development of appropriate methods for acceptance testing to assess and to determine the mechanical adjustment in all its degrees of freedom as well as the accuracy of attenuation corrected emission data is urgently needed. (orig.)

  4. 29 CFR 779.316 - Establishments outside “retail concept” not within statutory definition; lack first requirement.

    Science.gov (United States)

    2010-07-01

    ... Retailâ § 779.316 Establishments outside “retail concept” not within statutory definition; lack first... insurance company are not ordinarily thought of as retail transactions. The same is true of an electric power company selling electrical energy to private consumers. As to establishments of such businesses...

  5. 40 CFR 1060.104 - What running loss emission control requirements apply?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false What running loss emission control... STATIONARY EQUIPMENT Emission Standards and Related Requirements § 1060.104 What running loss emission control requirements apply? (a) Engines and equipment must meet running loss requirements as follows: (1...

  6. National Ignition Facility subsystem design requirements supervisory control software SSDR 1.5.2

    International Nuclear Information System (INIS)

    Woodruff, J.; VanArsdall, P.; Bliss, E.

    1996-01-01

    This System Design Requirement document establishes the performance, design, development, and test requirements for the Supervisory Control Software, WBS 1.5.2, which is part of the NIF Integrated Computer Control System (ICCS). This document responds directly to the requirements detailed in ICCS (WBS 1-5)

  7. Shielded chamber control stations: an answer to radiological protection requirements

    International Nuclear Information System (INIS)

    Delaboudiniere, Catherine.

    1979-06-01

    This study, carried out at the radiometallurgy laboratory of the Fontenay-aux-Roses Nuclear Research Centre, is based on an ergonomic approach. It shows that the shielded chamber control station, designed for human protection against ionizing radiations, demands an effort of adaptation on the part of the operator. This station does in fact meet radiological protection obligations but would benefit from certain improvements aimed at reducing the secondary fatigue of manipulators already under the strain of adapting to the machine. Fields in which improvements and/or changes are desirable have been investigated with special reference to telemanipulators. New and better designed instruments will soon appear on the telemanipulator market [fr

  8. Immunohistochemistry of colorectal cancer biomarker phosphorylation requires controlled tissue fixation.

    Directory of Open Access Journals (Sweden)

    Abbey P Theiss

    Full Text Available Phosphorylated signaling molecules are biomarkers of cancer pathophysiology and resistance to therapy, but because phosphoprotein analytes are often labile, poorly controlled clinical laboratory practices could prevent translation of research findings in this area from the bench to the bedside. We therefore compared multiple biomarker and phosphoprotein immunohistochemistry (IHC results in 23 clinical colorectal carcinoma samples after either a novel, rapid tissue fixation protocol or a standard tissue fixation protocol employed by clinical laboratories, and we also investigated the effect of a defined post-operative "cold" ischemia period on these IHC results. We found that a one-hour cold ischemia interval, allowed by ASCO/CAP guidelines for certain cancer biomarker assays, is highly deleterious to certain phosphoprotein analytes, specifically the phosphorylated epidermal growth factor receptor (pEGFR, but shorter ischemic intervals (less than 17 minutes facilitate preservation of phosphoproteins. Second, we found that a rapid 4-hour, two temperature, formalin fixation yielded superior staining in several cases with select markers (pEGFR, pBAD, pAKT compared to a standard overnight room temperature fixation protocol, despite taking less time. These findings indicate that the future research and clinical utilities of phosphoprotein IHC for assessing colorectal carcinoma pathophysiology absolutely depend upon attention to preanalytical factors and rigorously controlled tissue fixation protocols.

  9. 15 CFR 923.45 - Air and water pollution control requirements.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Air and water pollution control....45 Air and water pollution control requirements. The program must incorporate, by reference or otherwise, all requirements established by the Federal Water Pollution Control Act, as amended (Clean Water...

  10. 40 CFR 51.912 - What requirements apply for reasonably available control technology (RACT) and reasonably...

    Science.gov (United States)

    2010-07-01

    ...) What is the Reasonably Available Control Measures (RACM) requirement for areas designated nonattainment... 40 Protection of Environment 2 2010-07-01 2010-07-01 false What requirements apply for reasonably available control technology (RACT) and reasonably available control measures (RACM) under the 8-hour NAAQS...

  11. Scope Definition

    DEFF Research Database (Denmark)

    Bjørn, Anders; Owsianiak, Mikołaj; Laurent, Alexis

    2018-01-01

    The scope definition is the second phase of an LCA. It determines what product systems are to be assessed and how this assessment should take place. This chapter teaches how to perform a scope definition. First, important terminology and key concepts of LCA are introduced. Then, the nine items...... making up a scope definition are elaborately explained: (1) Deliverables. (2) Object of assessment, (3) LCI modelling framework and handling of multifunctional processes, (4) System boundaries and completeness requirements, (5) Representativeness of LCI data, (6) Preparing the basis for the impact...... assessment, (7) Special requirements for system comparisons, (8) Critical review needs and (9) Planning reporting of results. The instructions relate both to the performance and reporting of a scope definition and are largely based on ILCD....

  12. A definition of normovolaemia and consequences for cardiovascular control during orthostatic and environmental stress.

    Science.gov (United States)

    Truijen, Jasper; Bundgaard-Nielsen, Morten; van Lieshout, Johannes J

    2010-05-01

    The Frank-Starling mechanism describes the relationship between stroke volume and preload to the heart, or the volume of blood that is available to the heart--the central blood volume. Understanding the role of the central blood volume for cardiovascular control has been complicated by the fact that a given central blood volume may be associated with markedly different central vascular pressures. The central blood volume varies with posture and, consequently, stroke volume and cardiac output (Q) are affected, but with the increased central blood volume during head-down tilt, stroke volume and Q do not increase further indicating that in the supine resting position the heart operates on the plateau of the Frank-Starling curve which, therefore, may be taken as a functional definition of normovolaemia. Since the capacity of the vascular system surpasses the blood volume, orthostatic and environmental stress including bed rest/microgravity, exercise and training, thermal loading, illness, and trauma/haemorrhage is likely to restrict venous return and Q. Consequently the cardiovascular responses are determined primarily by their effect on the central blood volume. Thus during environmental stress, flow redistribution becomes dependent on sympathetic activation affecting not only skin and splanchnic blood flow, but also flow to skeletal muscles and the brain. This review addresses the hypothesis that deviations from normovolaemia significantly influence these cardiovascular responses.

  13. A Use Case Methodology to Handle Conflicting Controller Requirements for Future Power Systems

    DEFF Research Database (Denmark)

    Heussen, Kai; Uslar, Mathias; Tornelli, Carlo

    2015-01-01

    This paper proposes a standards based requirements elicitation and analysis strategy tailored for smart grid control structure development. Control structures in electric power systems often span across several systems and stakeholders. Requirements elicitation for such control systems therefore...... requires coordination across many stakeholders and it is challenging to achieve a consistent design. To enable an iterative and distributed development we suggest a conflict management approach as a modular element of the design strategy, focusing on conflict identification and tracing. The idea...

  14. 10 CFR 1706.2 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... FACILITIES SAFETY BOARD ORGANIZATIONAL AND CONSULTANT CONFLICTS OF INTERESTS § 1706.2 Definitions. Advisory... or individuals if, directly or indirectly, either one controls or can control the other or a third party controls or can control both. Board means, as the context requires, the Defense Nuclear Facilities...

  15. On Early Conflict Identification by Requirements Modeling of Energy System Control Structures

    DEFF Research Database (Denmark)

    Heussen, Kai; Gehrke, Oliver; Niemann, Hans Henrik

    2015-01-01

    issues early. For requirements formulation of control structures, cyber and physical aspects need to be jointly represented to express interdependencies, check for consistency and discover potentially conflicting requirements. Early identification of potential conflicts may prevent larger problems...... at later design stages. However, languages employed for requirements modeling today do not offer the expressiveness necessary to represent control purposes in relation to domain level interactions and therefore miss several types of interdependencies. This paper introduces the idea of control structure...... modeling for early requirements checking using a suitable modeling language, and illustrates how this approach enables the identification of several classes of controller conflict....

  16. Has the symptom severity inclusion requirement narrowed the definition of major depressive disorder in antidepressant efficacy trials?

    Science.gov (United States)

    Zimmerman, Mark; Walsh, Emily; Chelminski, Iwona; Dalrymple, Kristy

    2017-03-15

    The inclusion criteria of all placebo-controlled studies of antidepressants have required a minimum level of severity on standardized measures of symptoms of depression. In the present report from the Rhode Island Methods to Improve Diagnostic Assessment and Services (MIDAS) project we examined the association between scores on the Hamilton Depression Rating Scale (HAMD) and the number of criteria met for MDD, as well as the impact of different HAMD cutoff scores on the distribution of the number of DSM-IV criteria met. We speculated that the use of a minimum symptom severity score (MSSS) for inclusion in an antidepressant efficacy trial (AETs) disproportionately excludes patients who are at or just above the diagnostic threshold for MDD, whereas patients who are well above the diagnostic threshold are not excluded. Seven hundred forty outpatients with current MDD were evaluated with a semi-structured diagnostic interview. We compared the distribution of DSM-IV MDD criteria scores in patients who scored at or above or below the 3 cutoff scores on the HAMD most commonly used for inclusion in an AET. The distribution of the number of DSM-IV MDD symptom criteria met was significantly associated with HAMD scores. Compared to patients scoring below 18 on the HAMD the patients scoring 18 and above were less likely to report 5 MDD criteria (13.9% vs. 43.7%, χ 2 =82.2, pconducted in a single outpatient practice in which the majority of patients were white, female, and had health insurance. Although the study was limited to a single site, a strength of the recruitment procedure was that the sample was not selected for participation in a treatment study, and exclusion and inclusion criteria did not reduce the representativeness of the patient groups. While there is not a perfect relationship between the HAMD score and the number of DSM MDD criteria present, the results of the current study suggest that HAMD scores can be thought of as a proxy for the number of DSM

  17. Definition and dynamic control of a continuous chromatography process independent of cell culture titer and impurities.

    Science.gov (United States)

    Chmielowski, Rebecca A; Mathiasson, Linda; Blom, Hans; Go, Daniel; Ehring, Hanno; Khan, Heera; Li, Hong; Cutler, Collette; Lacki, Karol; Tugcu, Nihal; Roush, David

    2017-12-01

    Advances in cell culture technology have enabled the production of antibody titers upwards of 30g/L. These highly productive cell culture systems can potentially lead to productivity bottlenecks in downstream purification due to lower column loadings, especially in the primary capture chromatography step. Alternative chromatography solutions to help remedy this bottleneck include the utilization of continuous processing systems such as periodic counter-current chromatography (PCC). Recent studies have provided methods to optimize and improve the design of PCC for cell culture titers up to about 3g/L. This paper defines a continuous loading strategy for PCC that is independent of cell culture background and encompasses cell culture titers up to about 31g/L. Initial experimentation showed a challenge with determining a difference in change in UV280nm signal (ie. ΔUV) between cell culture feed and monoclonal antibody (mAb) concentration. Further investigation revealed UV280nm absorbance of the cell culture feedstock without antibody was outside of the linear range of detection for a given cell pathlength. Additional experimentation showed the difference in ΔUV for various cell culture feeds can be either theoretically predicted by Beer's Law given a known absorbance of the media background and impurities or experimentally determined using various UV280nm cell pathlengths. Based on these results, a 0.35mm pathlength at UV280nm was chosen for dynamic control to overcome the background signal. The pore diffusion model showed good agreement with the experimental frontal analysis data, which resulted in definition of a ΔUV setpoint range between 20 and 70% for 3C-PCC experiments. Product quality of the elution pools was acceptable between various cell culture feeds and titers up to about 41g/L. Results indicated the following ΔUV setpoints to achieve robust dynamic control and maintain 3C-PCC yield: ∼20-45% for titers greater than 10g/L depending on UV absorbance of

  18. Transaction-based building controls framework, Volume 2: Platform descriptive model and requirements

    Energy Technology Data Exchange (ETDEWEB)

    Akyol, Bora A. [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Haack, Jereme N. [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Carpenter, Brandon J. [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Katipamula, Srinivas [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Lutes, Robert G. [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Hernandez, George [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States)

    2015-07-31

    Transaction-based Building Controls (TBC) offer a control systems platform that provides an agent execution environment that meets the growing requirements for security, resource utilization, and reliability. This report outlines the requirements for a platform to meet these needs and describes an illustrative/exemplary implementation.

  19. Treated effluent disposal system process control computer software requirements and specification

    International Nuclear Information System (INIS)

    Graf, F.A. Jr.

    1994-01-01

    The software requirements for the monitor and control system that will be associated with the effluent collection pipeline system known as the 200 Area Treated Effluent Disposal System is covered. The control logic for the two pump stations and specific requirements for the graphic displays are detailed

  20. 28 CFR 570.43 - Inmates requiring a high degree of control and supervision.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Inmates requiring a high degree of control and supervision. 570.43 Section 570.43 Judicial Administration BUREAU OF PRISONS, DEPARTMENT OF JUSTICE COMMUNITY PROGRAMS AND RELEASE COMMUNITY PROGRAMS Escorted Trips § 570.43 Inmates requiring a high degree of control and supervision. Only the...

  1. 78 FR 11521 - Control of Communicable Disease; Foreign-Requirements for Importers of Nonhuman Primates (NHP)

    Science.gov (United States)

    2013-02-15

    ... Part 71 Control of Communicable Disease; Foreign--Requirements for Importers of Nonhuman Primates (NHP... Primates (NHP) AGENCY: Centers for Disease Control and Prevention (CDC), Department of Health and Human... live nonhuman primates (NHPs) by extending existing requirements for the importation of Macaca...

  2. Internal versus external controls on age variability: Definitions, origins and implications in a changing climate

    Science.gov (United States)

    Harman, C. J.

    2015-12-01

    The unsteadiness of stream water age is now well established, but the controls on the age dynamics, and the adequate representation and prediction of those dynamics, are not. A basic distinction can be made between internal variability that arises from changes in the proportions of flow moving through the diverse flow pathways of a hydrologic system, and external variability that arises from the stochasticity of inputs and outputs (such as precipitation and streamflow). In this talk I will show how these two types of age variability can be formally defined and distinguished within the framework of rank StorAge Selection (rSAS) functions. Internal variability implies variations in time in the rSAS function, while external variability does not. This leads naturally to the definition of several modes of internal variability, reflecting generic ways that system flowpaths may be rearranged. This rearrangement may be induced by fluctuations in the system state (such as catchment wetness), or by longer-term changes in catchment structure (such as land use change). One type of change, the 'inverse storage effect' is characterized by an increase in the release of young water from the system in response to an increase in overall system storage. This effect can be seen in many hydrologic settings, and has important implications for the effect of altered hydroclimatic conditions on solute transport through a landscape. External variability, such as increased precipitation, can induce a decrease in mean transit time (and vice versa), but this effect is greatly enhanced if accompanied by an internal shift in flow pathways that increases the relative importance of younger water. These effects will be illustrated using data from field and experimental studies.

  3. Product Structure, the Heart of Product Definition

    Science.gov (United States)

    DeHoog, C., Jr.

    1999-01-01

    This paper describes the LMMSS Product Definition System (PDS) philosophy and approach were the use of each item parts document or software can be traced to a specific end item (EI) serial/tail number of the product. It explains why a part-oriented approach to data organization and configuration management is required. The definition of part-oriented is that all appropriate product definition data products will be collected. Referenced and managed by their linkage/relationship to parts/items, The paper will touch upon how LMMSS store/controls product definition information under each project's top product designator in a two tiered approach. One tier for each product end item and another tier which contain/controls listings of drawings, documents. Specifications and standards that are required for hardware item definition.

  4. Technical Requirements Analysis and Control Systems (TRACS) Initial Operating Capability (IOC) documentation

    Science.gov (United States)

    Hammond, Dana P.

    1991-01-01

    The Technical Requirements Analysis and Control Systems (TRACS) software package is described. TRACS offers supplemental tools for the analysis, control, and interchange of project requirements. This package provides the fundamental capability to analyze and control requirements, serves a focal point for project requirements, and integrates a system that supports efficient and consistent operations. TRACS uses relational data base technology (ORACLE) in a stand alone or in a distributed environment that can be used to coordinate the activities required to support a project through its entire life cycle. TRACS uses a set of keyword and mouse driven screens (HyperCard) which imposes adherence through a controlled user interface. The user interface provides an interactive capability to interrogate the data base and to display or print project requirement information. TRACS has a limited report capability, but can be extended with PostScript conventions.

  5. 40 CFR 63.2251 - What are the requirements for the routine control device maintenance exemption?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 12 2010-07-01 2010-07-01 true What are the requirements for the routine control device maintenance exemption? 63.2251 Section 63.2251 Protection of Environment... and Composite Wood Products General Compliance Requirements § 63.2251 What are the requirements for...

  6. A Control Law Definition of the Open Loop Stepping Electric Drive

    Directory of Open Access Journals (Sweden)

    A. B. Krasovskii

    2015-01-01

    Full Text Available The paper considers an open loop stepping electric drive (SEP with electric crushing of a step and motor fed from the controlled current invertor which should meet the requirement that is to trial a free-form guided trajectory with a split-hair accuracy. It is shown that with traditional programmed control, when the SEP forms motor phase currents of identical amplitude and variable frequency proportional to the set speed of movement, there may be considerable errors reducing a trial accuracy of the set movement trajectory, dynamic indicators provoking oscillatory processes, and even loss of motor synchronism because influence on a dynamic moment of the motor is impossible.The paper offers and proves a new way to define a control algorithm adequate to drive parameters and programmed trajectory of movement, providing error minimization and thereby increasing trial accuracy of set parameters of movement and expanding dynamic capabilities of a drive. The essence of the offered way is to use a modified mathematical model of a drive in d,q coordinates with a motor fed by the current source. In this model a programmed trajectory of movement is chosen as an input action while solving the appropriate equations defines the necessary law of control. The paper describes a developed simulation model of the stepping electric drive in the environment of MATLAB – SIMULINK, which has been used to verify and prove an efficiency of the offered method to define a control law via typical examples.It is established that no error trial of set movement trajectory in case it has breaks (jogs is technically unfeasible, as it demands an infinitely high forcing voltage of the power supply to maintain the instant positive or negative phase shifts of currents formed in the motor windings.The obtained results can be used in designing programmable precision SEPs in robots, numerically controlled machine tools, and assembly equipment.

  7. Definition of infection after fracture fixation: A systematic review of randomized controlled trials to evaluate current practice.

    Science.gov (United States)

    Metsemakers, W J; Kortram, K; Morgenstern, M; Moriarty, T F; Meex, I; Kuehl, R; Nijs, S; Richards, R G; Raschke, M; Borens, O; Kates, S L; Zalavras, C; Giannoudis, P V; Verhofstad, M H J

    2018-03-01

    One of the most challenging musculoskeletal complications in modern trauma surgery is infection after fracture fixation (IAFF). Although infections are clinically obvious in many cases, a clear definition of the term IAFF is crucial, not only for the evaluation of published research data but also for the establishment of uniform treatment concepts. The aim of this systematic review was to identify the definitions used in the scientific literature to describe infectious complications after internal fixation of fractures. The hypothesis of this study was that the majority of fracture-related literature do not define IAFF. A comprehensive search was performed in Embase, Cochrane, Google Scholar, Medline (OvidSP), PubMed publisher and Web-of-Science for randomized controlled trials (RCTs) on fracture fixation. Data were collected on the definition of infectious complications after fracture fixation used in each study. Study selection was accomplished through two phases. During the first phase, titles and abstracts were reviewed for relevance, and the full texts of relevant articles were obtained. During the second phase, full-text articles were reviewed. All definitions were literally extracted and collected in a database. Then, a classification was designed to rate the quality of the description of IAFF. A total of 100 RCT's were identified in the search. Of 100 studies, only two (2%) cited a validated definition to describe IAFF. In 28 (28%) RCTs, the authors used a self-designed definition. In the other 70 RCTs, (70%) there was no description of a definition in the Methods section, although all of the articles described infections as an outcome parameter in the Results section. This systematic review shows that IAFF is not defined in a large majority of the fracture-related literature. To our knowledge, this is the first study conducted with the objective to explore this important issue. The lack of a consensus definition remains a problem in current orthopedic

  8. A pilot's opinion - VTOL control design requirements for the instrument approach task.

    Science.gov (United States)

    Patton, J. M., Jr.

    1972-01-01

    This paper presents pilot opinion supported by test data concerning flight control and display concepts and control system design requirements for VTOL aircraft in the instrument approach task. Material presented is drawn from research flights in the following aircraft: Dornier DO-31, Short SC-1, LTV XC-142A, and Boeing-Vertol CH-46. The control system concepts and mechanizations employed in the above aircraft are discussed, and the effect of control system augmentation is shown on performance. Operational procedures required in the instrument approach task are described, with comments on need for automation and combining of control functions.

  9. 40 CFR 1060.102 - What permeation emission control requirements apply for fuel lines?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false What permeation emission control... AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EVAPORATIVE EMISSIONS FROM NEW AND IN-USE NONROAD AND STATIONARY EQUIPMENT Emission Standards and Related Requirements § 1060.102 What permeation...

  10. 40 CFR 1060.103 - What permeation emission control requirements apply for fuel tanks?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false What permeation emission control... AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EVAPORATIVE EMISSIONS FROM NEW AND IN-USE NONROAD AND STATIONARY EQUIPMENT Emission Standards and Related Requirements § 1060.103 What permeation...

  11. 40 CFR 75.21 - Quality assurance and quality control requirements.

    Science.gov (United States)

    2010-07-01

    ... quality assurance audit or any other audit, the system is out-of-control. The owner or operator shall... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Quality assurance and quality control... assurance and quality control requirements. (a) Continuous emission monitoring systems. The owner or...

  12. 42 CFR 456.51 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... institution for mental disease, as defined in § 440.10; (2) [Reserved] (3) Services provided in specialty hospitals and (b) Exclude services provided in mental hospitals. Utilization control requirements for mental... ASSISTANCE PROGRAMS UTILIZATION CONTROL Utilization Control: Hospitals § 456.51 Definitions. As used in this...

  13. Specification of safety requirements for waste packages with respect to practicable quality control measures

    International Nuclear Information System (INIS)

    Gruendler, D.; Wurtinger, W.

    1987-01-01

    Waste packages for disposal in a repository in the Federal Republic of Germany have to meet safety requirements derived from site specific safety analyses. The examination of the waste packages with regard to compliance with these requirements is the main objective of quality control measures. With respect to quality control the requirements have to be specified in a way that practicable control measures can be applied. This is dealt with for the quality control of the activity inventory and the quality control of the waste form. The paper discusses the determination of the activity of hard-to-measure radionuclides and the specification of safety related requirements for the waste form and the packaging using typical examples

  14. Large Deployable Reflector (LDR) system concept and technology definition study. Analysis of space station requirements for LDR

    Science.gov (United States)

    Agnew, Donald L.; Vinkey, Victor F.; Runge, Fritz C.

    1989-01-01

    A study was conducted to determine how the Large Deployable Reflector (LDR) might benefit from the use of the space station for assembly, checkout, deployment, servicing, refurbishment, and technology development. Requirements that must be met by the space station to supply benefits for a selected scenario are summarized. Quantitative and qualitative data are supplied. Space station requirements for LDR which may be utilized by other missions are identified. A technology development mission for LDR is outlined and requirements summarized. A preliminary experiment plan is included. Space Station Data Base SAA 0020 and TDM 2411 are updated.

  15. Large Deployable Reflector (LDR) system concept and technology definition study. Analysis of space station requirements for LDR

    Science.gov (United States)

    Agnew, Donald L.; Vinkey, Victor F.; Runge, Fritz C.

    1989-04-01

    A study was conducted to determine how the Large Deployable Reflector (LDR) might benefit from the use of the space station for assembly, checkout, deployment, servicing, refurbishment, and technology development. Requirements that must be met by the space station to supply benefits for a selected scenario are summarized. Quantitative and qualitative data are supplied. Space station requirements for LDR which may be utilized by other missions are identified. A technology development mission for LDR is outlined and requirements summarized. A preliminary experiment plan is included. Space Station Data Base SAA 0020 and TDM 2411 are updated.

  16. Autonomous Integrated Receive System (AIRS) requirements definition. Volume 4: Functional specification for the prototype Automated Integrated Receive System (AIRS)

    Science.gov (United States)

    Chie, C. M.

    1984-01-01

    The functional requirements for the performance, design, and testing for the prototype Automated Integrated Receive System (AIRS) to be demonstrated for the TDRSS S-Band Single Access Return Link are presented.

  17. 77 FR 75936 - Control of Communicable Diseases: Interstate; Scope and Definitions

    Science.gov (United States)

    2012-12-26

    ... add more current medical terminology where appropriate. HHS/CDC has determined that this NPRM is... proposing to update the definitions for interstate quarantine regulations to reflect modern terminology and..., under section 70.1, to reflect modern terminology and plain language commonly used by private sector...

  18. Requirements for implementing real-time control functional modules on a hierarchical parallel pipelined system

    Science.gov (United States)

    Wheatley, Thomas E.; Michaloski, John L.; Lumia, Ronald

    1989-01-01

    Analysis of a robot control system leads to a broad range of processing requirements. One fundamental requirement of a robot control system is the necessity of a microcomputer system in order to provide sufficient processing capability.The use of multiple processors in a parallel architecture is beneficial for a number of reasons, including better cost performance, modular growth, increased reliability through replication, and flexibility for testing alternate control strategies via different partitioning. A survey of the progression from low level control synchronizing primitives to higher level communication tools is presented. The system communication and control mechanisms of existing robot control systems are compared to the hierarchical control model. The impact of this design methodology on the current robot control systems is explored.

  19. Life sciences payload definition and integration study. Volume 2: Requirements, design, and planning studies for the carry-on laboratories. [for Spacelab

    Science.gov (United States)

    1974-01-01

    The task phase concerned with the requirements, design, and planning studies for the carry-on laboratory (COL) began with a definition of biomedical research areas and candidate research equipment, and then went on to develop conceptual layouts for COL which were each evaluated in order to arrive at a final conceptual design. Each step in this design/evaluation process concerned itself with man/systems integration research and hardware, and life support and protective systems research and equipment selection. COL integration studies were also conducted and include attention to electrical power and data management requirements, operational considerations, and shuttle/Spacelab interface specifications. A COL program schedule was compiled, and a cost analysis was finalized which takes into account work breakdown, annual funding, and cost reduction guidelines.

  20. Requirements analysis notebook for the flight data systems definition in the Real-Time Systems Engineering Laboratory (RSEL)

    Science.gov (United States)

    Wray, Richard B.

    1991-01-01

    A hybrid requirements analysis methodology was developed, based on the practices actually used in developing a Space Generic Open Avionics Architecture. During the development of this avionics architecture, a method of analysis able to effectively define the requirements for this space avionics architecture was developed. In this methodology, external interfaces and relationships are defined, a static analysis resulting in a static avionics model was developed, operating concepts for simulating the requirements were put together, and a dynamic analysis of the execution needs for the dynamic model operation was planned. The systems engineering approach was used to perform a top down modified structured analysis of a generic space avionics system and to convert actual program results into generic requirements. CASE tools were used to model the analyzed system and automatically generate specifications describing the model's requirements. Lessons learned in the use of CASE tools, the architecture, and the design of the Space Generic Avionics model were established, and a methodology notebook was prepared for NASA. The weaknesses of standard real-time methodologies for practicing systems engineering, such as Structured Analysis and Object Oriented Analysis, were identified.

  1. Requirements analysis notebook for the flight data systems definition in the Real-Time Systems Engineering Laboratory (RSEL)

    Science.gov (United States)

    Wray, Richard B.

    1991-12-01

    A hybrid requirements analysis methodology was developed, based on the practices actually used in developing a Space Generic Open Avionics Architecture. During the development of this avionics architecture, a method of analysis able to effectively define the requirements for this space avionics architecture was developed. In this methodology, external interfaces and relationships are defined, a static analysis resulting in a static avionics model was developed, operating concepts for simulating the requirements were put together, and a dynamic analysis of the execution needs for the dynamic model operation was planned. The systems engineering approach was used to perform a top down modified structured analysis of a generic space avionics system and to convert actual program results into generic requirements. CASE tools were used to model the analyzed system and automatically generate specifications describing the model's requirements. Lessons learned in the use of CASE tools, the architecture, and the design of the Space Generic Avionics model were established, and a methodology notebook was prepared for NASA. The weaknesses of standard real-time methodologies for practicing systems engineering, such as Structured Analysis and Object Oriented Analysis, were identified.

  2. 21 CFR 111.113 - What quality control operations are required for a material review and disposition decision?

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false What quality control operations are required for a... Production and Process Control System: Requirements for Quality Control § 111.113 What quality control operations are required for a material review and disposition decision? (a) Quality control personnel must...

  3. Software requirements specification for the program analysis and control system risk management module

    International Nuclear Information System (INIS)

    SCHAEFER, J.C.

    1999-01-01

    TWR Program Analysis and Control System Risk Module is used to facilitate specific data processes surrounding the Risk Management program of the Tank Waste Retrieval environment. This document contains the Risk Management system requirements of the database system

  4. Design requirements for SRB production control system. Volume 3: Package evaluation, modification and hardware

    Science.gov (United States)

    1981-01-01

    The software package evaluation was designed to analyze commercially available, field-proven, production control or manufacturing resource planning management technology and software package. The analysis was conducted by comparing SRB production control software requirements and conceptual system design to software package capabilities. The methodology of evaluation and the findings at each stage of evaluation are described. Topics covered include: vendor listing; request for information (RFI) document; RFI response rate and quality; RFI evaluation process; and capabilities versus requirements.

  5. Conceptual requirements for large fusion experiment control, data, robotics, and management systems

    International Nuclear Information System (INIS)

    Gaudreau, M.P.J.; Sullivan, J.D.

    1987-05-01

    The conceptual system requirements for the control, data, robotics, and project management (CDRM) system for the next generation of fusion experiments are developed by drawing on the success of the Tara control and data system. The requirements are described in terms of an integrated but separable matrix of well-defined interfaces among the various systems and subsystems. The study stresses modularity, performance, cost effectiveness, and exportability

  6. Neck control after definitive radiochemotherapy without planned neck dissection in node-positive head and neck cancers

    International Nuclear Information System (INIS)

    Jang, Na Young; Lee, Keun-Wook; Ahn, Soon-Hyun; Kim, Jae-Sung; Ah Kim, In

    2012-01-01

    The purpose of this study was to evaluate neck control outcomes after definitive radiochemotherapy without planned neck dissection in node-positive head and neck cancer. We retrospectively reviewed medical records of fifty patients with node-positive head and neck cancer who received definitive radiochemotherapy. Twelve patients subsequently underwent neck dissection for suspicious recurrent or persistent disease. A median dose of 70 Gy (range 60-70.6) was delivered to involved nodes. Response evaluation was performed at a median of 5 weeks after completion of radiotherapy. Neck failure was observed in 11 patients and the 3-year regional control (RC) rate was 77.1%. Neck dissection was performed in 10 of the 11 patients; seven of these cases were successfully salvaged, and the ultimate rate of neck control was 92%. The remaining two patients who received neck dissection had negative pathologic results. On univariate analysis, initial nodal size > 2 cm, a less-than-complete response at the primary site, post-radiotherapy nodal size > 1.5 cm, and post-radiotherapy nodal necrosis were associated with RC. On multivariate analysis, less-than-complete primary site response and post-radiotherapy nodal necrosis were identified as independent prognostic factors for RC. The neck failure rate after definitive radiochemotherapy without planned neck dissection was 22%. Two-thirds of these were successfully salvaged with neck dissection and the ultimate neck control rate was 92%. Our results suggest that planned neck dissection might not be necessary in patients with complete response of primary site, no evidence of residual lesion > 1.5 cm, or no necrotic lymph nodes at the 1-2 months follow-up evaluation after radiotherapy

  7. Quality assurance requirements for control of procurement items and services for nuclear fuel reprocessing facilities

    International Nuclear Information System (INIS)

    Anon.

    1979-01-01

    Requirements and guidelines are provided for the control of activities to be exercised during procurement of items and services which affect the quality of nuclear facilities. These requirements and guidelines apply to procurement activities for items and services such as designing, purchasing, fabricating, handling, shipping, storing, cleaning, constructing, erecting, installing, inspecting, texting, maintaining and modifying

  8. Design requirements for SRB production control system. Volume 1: Study background and overview

    Science.gov (United States)

    1981-01-01

    The solid rocket boosters assembly environment is described in terms of the contraints it places upon an automated production control system. The business system generated for the SRB assembly and the computer system which meets the business system requirements are described. The selection software process and modifications required to the recommended software are addressed as well as the hardware and configuration requirements necessary to support the system.

  9. Definition of a post-Fukushima hard core for EDF's PWRs: objectives, content and associated requirements

    International Nuclear Information System (INIS)

    2014-01-01

    After having recalled the implementation of the additional safety assessments (ECS) on the French nuclear reactors after the Fukushima accident, and that, after these assessments, ASN asked EDF to implement a 'hard core of robust material and organisational measures' which aim at preventing an accident with a core fusion or at limiting its progress, at limiting massive radioactive releases, and at enabling the operator to perform his required missions in crisis management, this report indicates the objectives of this hard core, and discusses the material measures proposed by EDF. These measures concern the exploited reactors and the EPR Flamanville 3, the pools present in the fuel and reactor buildings. It also discusses the requirements associated with these material measures, notably with respect to earthquake, flooding or other extreme events

  10. National Ignition Facility, subsystem design requirements beam control and laser diagnostics SSDR 1.7

    International Nuclear Information System (INIS)

    Bliss, E.

    1996-01-01

    This Subsystem Design Requirement document is a development specification that establishes the performance, design, development, and test requirements for the Alignment subsystem (WBS 1.7.1), Beam Diagnostics (WBS 1.7.2), and the Wavefront Control subsystem (WBS 1.7. 3) of the NIF Laser System (WBS 1.3). These three subsystems are collectively referred to as the Beam Control ampersand Laser Diagnostics Subsystem. The NIF is a multi-pass, 192-beam, high-power, neodymium-glass laser that meets requirements set forth in the NIF SDR 002 (Laser System). 3 figs., 3 tabs

  11. Technology Requirements and Development for Affordable High-Temperature Distributed Engine Controls

    Science.gov (United States)

    2012-06-04

    long lasting, high temperature modules is to use high temperature electronics on ceramic modules. The electronic components are “ brazed ” onto the...Copyright © 2012 by ISA Technology Requirements and Development for Affordable High - Temperature Distributed Engine Controls Alireza Behbahani 1...with regards to high temperature capability. The Government and Industry Distributed Engine Controls Working Group (DECWG) [5] has been established

  12. 13 CFR 127.202 - What are the requirements for control of an EDWOSB or WOSB?

    Science.gov (United States)

    2010-01-01

    ... experience of the extent and complexity needed to run the concern. The woman manager need not have the... ADMINISTRATION WOMEN-OWNED SMALL BUSINESS FEDERAL CONTRACT ASSISTANCE PROCEDURES Eligibility Requirements To... be controlled by one or more women. Control by one or more women means that both the long-term...

  13. Man/machine interface for a nuclear cask remote handling control station: system design requirements

    International Nuclear Information System (INIS)

    Clarke, M.M.; Kreifeldt, J.G.; Draper, J.V.

    1984-01-01

    Design requirements are presented for a control station of a proposed semi-automated facility for remote handling of nuclear waste casks. Functional and operational man/machine interface: controls, displays, software format, station architecture, and work environment. In addition, some input is given to the design of remote sensing systems in the cask handling areas. 18 references, 9 figures, 12 tables

  14. Process qualification and control in electron beams--requirements, methods, new concepts and challenges

    International Nuclear Information System (INIS)

    Mittendorfer, J.; Gratzl, F.; Hanis, D.

    2004-01-01

    In this paper the status of process qualification and control in electron beam irradiation is analyzed in terms of requirements, concepts, methods and challenges for a state-of-the-art process control concept for medical device sterilization. Aspects from process qualification to routine process control are described together with the associated process variables. As a case study the 10 MeV beams at Mediscan GmbH are considered. Process control concepts like statistical process control (SPC) and a new concept to determine process capability is briefly discussed

  15. Concepts for Life Cycle Cost Control Required to Achieve Space Transportation Affordability and Sustainability

    Science.gov (United States)

    Rhodes, Russel E.; Zapata, Edgar; Levack, Daniel J. H.; Robinson, John W.; Donahue, Benjamin B.

    2009-01-01

    Cost control must be implemented through the establishment of requirements and controlled continually by managing to these requirements. Cost control of the non-recurring side of life cycle cost has traditionally been implemented in both commercial and government programs. The government uses the budget process to implement this control. The commercial approach is to use a similar process of allocating the non-recurring cost to major elements of the program. This type of control generally manages through a work breakdown structure (WBS) by defining the major elements of the program. If the cost control is to be applied across the entire program life cycle cost (LCC), the approach must be addressed very differently. A functional breakdown structure (FBS) is defined and recommended. Use of a FBS provides the visibifity to allow the choice of an integrated solution reducing the cost of providing many different elements of like function. The different functional solutions that drive the hardware logistics, quantity of documentation, operational labor, reliability and maintainability balance, and total integration of the entire system from DDT&E through the life of the program must be fully defined, compared, and final decisions made among these competing solutions. The major drivers of recurring cost have been identified and are presented and discussed. The LCC requirements must be established and flowed down to provide control of LCC. This LCC control will require a structured rigid process similar to the one traditionally used to control weight/performance for space transportation systems throughout the entire program. It has been demonstrated over the last 30 years that without a firm requirement and methodically structured cost control, it is unlikely that affordable and sustainable space transportation system LCC will be achieved.

  16. Mutational definition of binding requirements of an hnRNP-like protein in Arabidopsis using fluorescence correlation spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Leder, Verena [Molecular Cell Physiology, Faculty of Biology, Bielefeld University (Germany); Biomolecular Photonics, Faculty of Physics, Bielefeld University (Germany); Lummer, Martina [Molecular Cell Physiology, Faculty of Biology, Bielefeld University (Germany); Tegeler, Kathrin [Molecular Cell Physiology, Faculty of Biology, Bielefeld University (Germany); Biomolecular Photonics, Faculty of Physics, Bielefeld University (Germany); Humpert, Fabian [Biomolecular Photonics, Faculty of Physics, Bielefeld University (Germany); Lewinski, Martin [Molecular Cell Physiology, Faculty of Biology, Bielefeld University (Germany); Schüttpelz, Mark [Biomolecular Photonics, Faculty of Physics, Bielefeld University (Germany); Staiger, Dorothee, E-mail: dorothee.staiger@uni-bielefeld.de [Molecular Cell Physiology, Faculty of Biology, Bielefeld University (Germany)

    2014-10-10

    Highlights: • We use FCS to investigate binding site requirements for the hnRNP-like protein AtGRP7. • We identify three nucleotides critical for AtGRP7 binding to its own intron. • Mutation of the conserved R{sup 49} abolishes binding altogether. • The paralogue AtGRP8 binds to an overlapping motif with different sequence requirement. • The glycine-rich stretch of a plant hnRNP-like protein contributes to binding. - Abstract: Arabidopsis thaliana glycine-rich RNA binding protein 7 (AtGRP7) is part of a negative feedback loop through which it regulates alternative splicing and steady-state abundance of its pre-mRNA. Here we use fluorescence correlation spectroscopy to investigate the requirements for AtGRP7 binding to its intron using fluorescently-labelled synthetic oligonucleotides. By systematically introducing point mutations we identify three nucleotides that lead to an increased K{sub d} value when mutated and thus are critical for AtGRP7 binding. Simultaneous mutation of all three residues abrogates binding. The paralogue AtGRP8 binds to an overlapping motif but with a different sequence preference, in line with overlapping but not identical functions of this protein pair. Truncation of the glycine-rich domain reduces the binding affinity of AtGRP7, showing for the first time that the glycine-rich stretch of a plant hnRNP-like protein contributes to binding. Mutation of the conserved R{sup 49} that is crucial for AtGRP7 function in pathogen defence and splicing abolishes binding.

  17. Definition of Specific Functions and Procedural Skills Required by Cuban Specialists in Intensive Care and Emergency Medicine.

    Science.gov (United States)

    Véliz, Pedro L; Berra, Esperanza M; Jorna, Ana R

    2015-07-01

    INTRODUCTION Medical specialties' core curricula should take into account functions to be carried out, positions to be filled and populations to be served. The functions in the professional profile for specialty training of Cuban intensive care and emergency medicine specialists do not include all the activities that they actually perform in professional practice. OBJECTIVE Define the specific functions and procedural skills required of Cuban specialists in intensive care and emergency medicine. METHODS The study was conducted from April 2011 to September 2013. A three-stage methodological strategy was designed using qualitative techniques. By purposive maximum variation sampling, 82 professionals were selected. Documentary analysis and key informant criteria were used in the first stage. Two expert groups were formed in the second stage: one used various group techniques (focus group, oral and written brainstorming) and the second used a three-round Delphi method. In the final stage, a third group of experts was questioned in semistructured in-depth interviews, and a two-round Delphi method was employed to assess priorities. RESULTS Ultimately, 78 specific functions were defined: 47 (60.3%) patient care, 16 (20.5%) managerial, 6 (7.7%) teaching, and 9 (11.5%) research. Thirty-one procedural skills were identified. The specific functions and procedural skills defined relate to the profession's requirements in clinical care of the critically ill, management of patient services, teaching and research at the specialist's different occupational levels. CONCLUSIONS The specific functions and procedural skills required of intensive care and emergency medicine specialists were precisely identified by a scientific method. This product is key to improving the quality of teaching, research, administration and patient care in this specialty in Cuba. The specific functions and procedural skills identified are theoretical, practical, methodological and social contributions to

  18. Mutational definition of binding requirements of an hnRNP-like protein in Arabidopsis using fluorescence correlation spectroscopy

    International Nuclear Information System (INIS)

    Leder, Verena; Lummer, Martina; Tegeler, Kathrin; Humpert, Fabian; Lewinski, Martin; Schüttpelz, Mark; Staiger, Dorothee

    2014-01-01

    Highlights: • We use FCS to investigate binding site requirements for the hnRNP-like protein AtGRP7. • We identify three nucleotides critical for AtGRP7 binding to its own intron. • Mutation of the conserved R 49 abolishes binding altogether. • The paralogue AtGRP8 binds to an overlapping motif with different sequence requirement. • The glycine-rich stretch of a plant hnRNP-like protein contributes to binding. - Abstract: Arabidopsis thaliana glycine-rich RNA binding protein 7 (AtGRP7) is part of a negative feedback loop through which it regulates alternative splicing and steady-state abundance of its pre-mRNA. Here we use fluorescence correlation spectroscopy to investigate the requirements for AtGRP7 binding to its intron using fluorescently-labelled synthetic oligonucleotides. By systematically introducing point mutations we identify three nucleotides that lead to an increased K d value when mutated and thus are critical for AtGRP7 binding. Simultaneous mutation of all three residues abrogates binding. The paralogue AtGRP8 binds to an overlapping motif but with a different sequence preference, in line with overlapping but not identical functions of this protein pair. Truncation of the glycine-rich domain reduces the binding affinity of AtGRP7, showing for the first time that the glycine-rich stretch of a plant hnRNP-like protein contributes to binding. Mutation of the conserved R 49 that is crucial for AtGRP7 function in pathogen defence and splicing abolishes binding

  19. Development of requirements tracking and verification system for the software design of distributed control system

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Chul Hwan; Kim, Jang Yeol; Kim, Jung Tack; Lee, Jang Soo; Ham, Chang Shik [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1999-12-31

    In this paper a prototype of Requirement Tracking and Verification System(RTVS) for a Distributed Control System was implemented and tested. The RTVS is a software design and verification tool. The main functions required by the RTVS are managing, tracking and verification of the software requirements listed in the documentation of the DCS. The analysis of DCS software design procedures and interfaces with documents were performed to define the user of the RTVS, and the design requirements for RTVS were developed. 4 refs., 3 figs. (Author)

  20. Development of requirements tracking and verification system for the software design of distributed control system

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Chul Hwan; Kim, Jang Yeol; Kim, Jung Tack; Lee, Jang Soo; Ham, Chang Shik [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1998-12-31

    In this paper a prototype of Requirement Tracking and Verification System(RTVS) for a Distributed Control System was implemented and tested. The RTVS is a software design and verification tool. The main functions required by the RTVS are managing, tracking and verification of the software requirements listed in the documentation of the DCS. The analysis of DCS software design procedures and interfaces with documents were performed to define the user of the RTVS, and the design requirements for RTVS were developed. 4 refs., 3 figs. (Author)

  1. Trauma patients meeting both Centers for Disease Control and Prevention's definitions for ventilator-associated pneumonia had worse outcomes than those meeting only one.

    Science.gov (United States)

    Younan, Duraid; Griffin, Russell; Swain, Thomas; Pittet, Jean-Francois; Camins, Bernard

    2017-08-01

    The Centers for Disease Control and Prevention's National Healthcare Safety Network (NHSN) replaced its old definition for ventilator-associated pneumonia (VAP) with the ventilator-associated events algorithm in 2013. We sought to compare the outcome of trauma patients meeting the definitions for VAP in the two modules. Trauma patients with blunt or penetrating injuries and with at least 2 d of ventilator support were identified from the trauma registry from 2013 to 2014. VAP was determined using two methods: (1) VAP as defined by the "old," clinically based NHSN definition and (2) possible VAP as defined by the updated "new" NHSN definition. Cohen's kappa statistic was determined to compare the two definitions for VAP. To compare demographic and clinical outcomes, the chi-square and Student's t-tests were used for categorical and continuous variables, respectively. From 2013 to 2014, there were 1165 trauma patients admitted who had at least 2 d of ventilator support. Seventy-eight patients (6.6%) met the "new" NHSN definition for possible VAP, 361 patients (30.9%) met the "old" definition of VAP, and 68 patients (5.8%) met both definitions. The kappa statistic between VAP as defined by the "new" and "old" definitions was 0.22 (95% confidence interval, 0.17-0.27). There were no differences in age, gender, race, or injury severity score when comparing patients who met the different definitions. Those satisfying both definitions had longer ventilator support days (P = 0.0009), intensive care unit length of stay (LOS; P = 0.0003), and hospital LOS (P = 0.0344) when compared with those meeting only one definition. There was no difference in mortality for those meeting both and those meeting the old definition for VAP; patients meeting both definitions had higher respiratory rate at arrival (P = 0.0178). There was no difference in mortality between patients meeting the "old" and "new" NHSN definitions for VAP; those who met "both" definitions had longer

  2. 21 CFR 111.120 - What quality control operations are required for components, packaging, and labels before use in...

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false What quality control operations are required for..., OR HOLDING OPERATIONS FOR DIETARY SUPPLEMENTS Production and Process Control System: Requirements for Quality Control § 111.120 What quality control operations are required for components, packaging, and...

  3. Main requirements and criteria for State nuclear material control and accounting

    International Nuclear Information System (INIS)

    Ryazanov, B.G.; Goryunov, V.K.; Erastov, V.V.

    1999-01-01

    The paper presents comments and substantiation of the main requirements and criteria for the State nuclear materials (NM) control and accounting system in the draft of the federal Main regulations of NM control and accounting. The State NM control and accounting system structure and design principles, the list of nuclear and special non-nuclear materials which are subject to the control and accounting, NM control and accounting principles are considered. Measurement system for the values for NM control and accounting and measurement assurance program, NM transfer procedures, physical inventory taking, closing a material balance and evaluation of inventory difference and balance closure of bulk form NM are shown. Accounting units in the inventory, the system accounting report documentation and preliminary notifications, the NM control and accounting arrangement, the federal and departmental control in the State NM control and accounting system, the State NM control and accounting system supervision and requirement to the personnel carrying out the NM control and accounting are discussed [ru

  4. Considerations for Probabilistic Analyses to Assess Potential Changes to Large-Break LOCA Definition for ECCS Requirements

    International Nuclear Information System (INIS)

    Wilkowski, G.; Rudland, D.; Wolterman, R.; Krishnaswamy, P.; Scott, P.; Rahman, S.; Fairbanks, C.

    2002-01-01

    The U.S.NRC has undertaken a study to explore changes to the body of Part 50 of the U.S. Federal Code of Regulations, to incorporate risk-informed attributes. One of the regulations selected for this study is 10 CFR 50.46, A cceptance Criteria for Emergency Core Cooling Systems for Light-Water Nuclear Power Reactors . These changes will potentially enhance safety and reduce unnecessary burden on utilities. Specific attention is being paid to redefining the maximum pipe break size for LB-LOCA by determining the spectrum of pipe diameter (or equivalent opening area) versus failure probabilities. In this regard, it is necessary to ensure that all contributors to probabilistic failures are accounted for when redefining ECCS requirements. This paper describes initial efforts being conducted for the U.S.NRC on redefining the LB-LOCA requirements. Consideration of the major contributors to probabilistic failure, and deterministic aspects for modeling them, are being addressed. At this time three major contributors to probabilistic failures are being considered. These include: (1) Analyses of the failure probability from cracking mechanisms that could involve rupture or large opening areas from either through-wall or surface flaws, whether the pipe system was approved for leak-before-break (LBB) or not. (2) Future degradation mechanisms, such as recent occurrence of PWSCC in PWR piping need to be included. This degradation mechanism was not recognized as being an issue when LBB was approved for many plants or when the initial risk-informed inspection plans were developed. (3) Other indirect causes of loss of pressure-boundary integrity than from cracks in the pipe system also should be included. The failure probability from probabilistic fracture mechanics will not account for these other indirect causes that could result in a large opening in the pressure boundary: i.e., failure of bolts on a steam generator manway, flanges, and valves; outside force damage from the

  5. Learning from professionals: Exploring cognitive rehabilitation strategies for the definition of the functional requirements of a telerehabilitation platform.

    Science.gov (United States)

    Rosso, Giovanni; Frisiello, Antonella; Trizio, Marco; Mosso, Cristina O; Bazzani, Marco

    2018-04-01

    In the past few years, the advances in Information and Communication Technology (ICT) led to the development of platforms and applications that aim to support cognitive rehabilitation therapy that contributes to extend patients' treatment at home. In our research we adopted the Human Centered Approach to design a cognitive rehabilitation platform that is able to provide tools and features tailored to the professional needs and strategies and also able to engage patients in their treatment process. In order to explore the clinicians' point of view on the neuropsychological intervention strategies, we applied two different techniques often used in human factors research: the Critical Decision Method to study professionals' strategies with a descriptive perspective, and the Hierarchical Task Analysis to analyze the processes with a normative view. The results of our research showed that the hybrid approach adopted allowed us to have a better focus on the cognitive rehabilitation process and on the professionals' decision making mechanism. This led to a better understanding of functional requirements for supporting clinician's strategic decision making, in terms of personalization of treatments, cognitive exercises settings and feedback customization. In conclusion, our research highlights the value of the CDM to focus deeply on which functionalities professionals require from a cognitive telerehabilitation system and allowed us to design more precisely clinician-patients interactions inside the system compared to prescriptive methods currently used. Our study offers contribution to the comprehension of the rehabilitation processes, suggesting the positive impacts of an "extended" clinic treatment by adopting a flexible and adaptable tool. Copyright © 2017. Published by Elsevier Ltd.

  6. Design requirements of instrumentation and control systems for next generation reactor

    International Nuclear Information System (INIS)

    Koo, In Soo; Lee, Byung Sun; Park, Kwang Hyun; Park, Heu Yoon; Lee, Dong Young; Kim, Jung Taek; Hwang, In Koo; Chung, Chul Hwan; Hur, Seop; Kim, Chang Hoi; Na, Nan Ju

    1994-03-01

    In this report, the basic design requirements of Instrumentation and Control systems for next generation reactor are described, which are top-tier level, to support the advanced I and C systems. It contains the requirements in accordance with the plant reliability, the plant performance, the operator's aid functions, the features for maintenance and testing, licensing issues for I and C systems. Advanced I and C systems are characterized such as the application of the digital and the human engineering technologies. To development of this requirements, the I and C systems for the foreign passive and the evolutionary types of reactor and the domestic conventional reators were reviewed and anlysed. At the detail design stage, these requirements will be used for top-tier requirements. To develop the detail design requirements in the future, more quantitive and qualitive analyses are need to be added. (Author) 44 refs

  7. Design requirements of instrumentation and control systems for next generation reactor

    Energy Technology Data Exchange (ETDEWEB)

    Koo, In Soo; Lee, Byung Sun; Park, Kwang Hyun; Park, Heu Yoon; Lee, Dong Young; Kim, Jung Taek; Hwang, In Koo; Chung, Chul Hwan; Hur, Seop; Kim, Chang Hoi; Na, Nan Ju [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1994-03-01

    In this report, the basic design requirements of Instrumentation and Control systems for next generation reactor are described, which are top-tier level, to support the advanced I and C systems. It contains the requirements in accordance with the plant reliability, the plant performance, the operator`s aid functions, the features for maintenance and testing, licensing issues for I and C systems. Advanced I and C systems are characterized such as the application of the digital and the human engineering technologies. To development of this requirements, the I and C systems for the foreign passive and the evolutionary types of reactor and the domestic conventional reators were reviewed and anlysed. At the detail design stage, these requirements will be used for top-tier requirements. To develop the detail design requirements in the future, more quantitive and qualitive analyses are need to be added. (Author) 44 refs.

  8. Integrated Application of Active Controls (IAAC) technology to an advanced subsonic transpot project-demonstration act system definition

    Science.gov (United States)

    Hanks, G. W.; Shomber, H. A.; Crumb, C. B.; Flora, C. C.; Macdonald, K. A. B.; Smith, R. D.; Sassi, A. P.; Dorwart, R. J.

    1982-01-01

    The 1985 ACT airplane is the Final Active Controls Technology (ACT) Airplane with the addition of three-axis fly by wire. Thus it retains all the efficiency features of the full ACT system plus the weight and cost savings accruing from deletion of the mechanical control system. The control system implements the full IAAC spectrum of active controls except flutter-mode control, judged essentially nonbeneficial, and incorporates new control surfaces called flaperons to make the most of wing-load alleviation. This redundant electronic system is conservatively designed to preserve the extreme reliability required of crucial short-period pitch augmentation, which provides more than half of the fuel savings.

  9. Analysis of power and frequency control requirements in view of increased decentralized production and market liberalization

    International Nuclear Information System (INIS)

    Roffel, B.; Boer, W.W. de

    2003-01-01

    This paper presents a systematic approach of the analysis of the minimum control requirements that are imposed on power producing units in the Netherlands, especially in the case when decentralized production increases. Also some effects of the liberalization on the control behavior are analyzed. First an overview is given of the amount and type of power production in the Netherlands, followed by a review of the control requirements. Next models are described, including a simplified model for the UCTE power system. The model was tested against frequency and power measurements after failure of a 558 MW production unit in the Netherlands. Agreement between measurements and model predictions proved to be good. The model was subsequently used to analyze the primary and secondary control requirements and the impact of an increase in decentralized power production on the fault restoration capabilities of the power system. Since the latter production units are not actively participating in primary and secondary control, fault restoration takes longer and becomes unacceptable when only 35% of the power producing units participate in secondary control. Finally, the model was used to study the impact of deregulation, especially the effect of 'block scheduling', on additional control actions of the secondary control. (Author)

  10. Locoregional control after intensity-modulated radiotherapy for nasopharyngeal carcinoma with an anatomy-based target definition

    International Nuclear Information System (INIS)

    Kawashima, Mitsuhiko; Ariji, Takaki; Kameoka, Satoru

    2013-01-01

    The objective of the study was to evaluate locoregional control after intensity-modulated radiotherapy for nasopharyngeal cancer using a target definition along with anatomical boundaries. Forty patients with biopsy-proven squamous cell or non-keratinizing carcinoma of the nasopharynx who underwent intensity-modulated radiotherapy between April 2006 and November 2009 were reviewed. There were 10 females and 30 males with a median age of 48 years (range, 17-74 years). More than half of the patients had T3/4 (n=21) and/or N2/3 (n=24) disease. Intensity-modulated radiotherapy was administered as 70 Gy/33 fractions with or without concomitant chemotherapy. The clinical target volume was contoured along with muscular fascia or periosteum, and the prescribed radiotherapy dose was determined for each anatomical compartment and lymph node level in the head and neck. One local recurrence was observed at Meckel's cave on the periphery of the high-risk clinical target volume receiving a total dose of <63 Gy. Otherwise, six locoregional failures were observed within irradiated volume receiving 70 Gy. Local and nodal control rates at 3 years were 91 and 89%, respectively. Adverse events were acceptable, and 25 (81%) of 31 patients who were alive without recurrence at 2 years had xerostomia of ≤ Grade 1. The overall survival rate at 3 years was 87%. Target definition along with anatomically defined boundaries was feasible without compromise of the therapeutic ratio. It is worth testing this method further to minimize the unnecessary irradiated volume and to standardize the target definition in intensity-modulated radiotherapy for nasopharyngeal cancer. (author)

  11. Solar Heating And Cooling Of Buildings (SHACOB): Requirements definition and impact analysis-2. Volume 3: Customer load management systems

    Science.gov (United States)

    Cretcher, C. K.; Rountredd, R. C.

    1980-11-01

    Customer Load Management Systems, using off-peak storage and control at the residences, are analyzed to determine their potential for capacity and energy savings by the electric utility. Areas broadly representative of utilities in the regions around Washington, DC and Albuquerque, NM were of interest. Near optimum tank volumes were determined for both service areas, and charging duration/off-time were identified as having the greatest influence on tank performance. The impacts on utility operations and corresponding utility/customer economics were determined in terms of delta demands used to estimate the utilities' generating capacity differences between the conventional load management, (CLM) direct solar with load management (DSLM), and electric resistive systems. Energy differences are also determined. These capacity and energy deltas are translated into changes in utility costs due to penetration of the CLM or DSLM systems into electric resistive markets in the snapshot years of 1990 and 2000.

  12. MODIS information, data and control system (MIDACS) level 2 functional requirements

    Science.gov (United States)

    Han, D.; Salomonson, V.; Ormsby, J.; Sharts, B.; Folta, D.; Ardanuy, P.; Mckay, A.; Hoyt, D.; Jaffin, S.; Vallette, B.

    1988-01-01

    The MODIS Information, Data and Control System (MIDACS) Level 2 Functional Requirements Document establishes the functional requirements for MIDACS and provides a basis for the mutual understanding between the users and the designers of the EosDIS, including the requirements, operating environment, external interfaces, and development plan. In defining the requirements and scope of the system, this document describes how MIDACS will operate as an element of the EOS within the EosDIS environment. This version of the Level 2 Requirements Document follows an earlier release of a preliminary draft version. The sections on functional and performance requirements do not yet fully represent the requirements of the data system needed to achieve the scientific objectives of the MODIS instruments and science teams. Indeed, the team members have not yet been selected and the team has not yet been formed; however, it has been possible to identify many relevant requirements based on the present concept of EosDIS and through interviews and meetings with key members of the scientific community. These requirements have been grouped by functional component of the data system, and by function within each component. These requirements have been merged with the complete set of Level 1 and Level 2 context diagrams, data flow diagrams, and data dictionary.

  13. Concerning major items in government ordinance requiring modification of part of enforcement regulation for law relating to control of nuclear material, nuclear fuel and nuclear reactor

    International Nuclear Information System (INIS)

    1989-01-01

    The report describes major items planned to be incorporated into the enforcement regulations for laws relating to control of nuclear material, nuclear fuel and nuclear reactor. The modifications have become necessary for the nation to conclude a nuclear material protection treaty with other countries. The modification include the definitions of 'special nuclear fuel substances' and 'special nuclear fuel substances' and 'special nuclear fuel substances subject to protection'. The modifications require that protective measures be taken when handling and transporting special nuclear fuel substances subject to protection. Transport of special nuclear fuel substances requires approval from the Prime Minister or Transport Minister. Transport of special nuclear fuel substances subject to protection should be conducted after notifying the prefectural Public Safety Commission. Transport of special nuclear fuel substances subject to protection requires the conclusion of arrangements among responsible persons and approval of them from the Prime Minister. (N.K.)

  14. Gamified Cognitive Control Training for Remitted Depressed Individuals: User Requirements Analysis.

    Science.gov (United States)

    Vervaeke, Jasmien; Van Looy, Jan; Hoorelbeke, Kristof; Baeken, Chris; Koster, Ernst Hw

    2018-04-05

    The high incidence and relapse rates of major depressive disorder demand novel treatment options. Standard treatments (psychotherapy, medication) usually do not target cognitive control impairments, although these seem to play a crucial role in achieving stable remission. The urgent need for treatment combined with poor availability of adequate psychological interventions has instigated a shift toward internet interventions. Numerous computerized programs have been developed that can be presented online and offline. However, their uptake and adherence are oftentimes low. The aim of this study was to perform a user requirements analysis for an internet-based training targeting cognitive control. This training focuses on ameliorating cognitive control impairments, as these are still present during remission and can be a risk factor for relapse. To facilitate uptake of and adherence to this intervention, a qualitative user requirements analysis was conducted to map mandatory and desirable requirements. We conducted a user requirements analysis through a focus group with 5 remitted depressed individuals and individual interviews with 6 mental health care professionals. All qualitative data were transcribed and examined using a thematic analytic approach. Results showed mandatory requirements for the remitted sample in terms of training configuration, technological and personal factors, and desirable requirements regarding knowledge and enjoyment. Furthermore, knowledge and therapeutic benefits were key requirements for therapists. The identified requirements provide useful information to be integrated in interventions targeting cognitive control in depression. ©Jasmien Vervaeke, Jan Van Looy, Kristof Hoorelbeke, Chris Baeken, Ernst HW Koster. Originally published in JMIR Serious Games (http://games.jmir.org), 05.04.2018.

  15. Facilitating control in growing organizations : A study of new requirements on systematization

    OpenAIRE

    Flyman, Elin; Nilsson, Christina

    2013-01-01

    Organizational growth poses new challenges for top management. In small organizations, coordination and communication is spontaneous and require little structure to be efficient. However, as the organization grows, the increased number of individuals requires a larger amount of coordination and communication. In this study, our purpose is to increase understanding of why growing companies are experiencing challenges with coordination as well as to increase organizational control. To fulfill t...

  16. A modal H∞-norm-based performance requirement for damage-tolerant active controller design

    Science.gov (United States)

    Genari, Helói F. G.; Mechbal, Nazih; Coffignal, Gérard; Nóbrega, Eurípedes G. O.

    2017-04-01

    Damage-tolerant active control (DTAC) is a recent research area that encompasses control design methodologies resulting from the application of fault-tolerant control methods to vibration control of structures subject to damage. The possibility of damage occurrence is not usually considered in the active vibration control design requirements. Damage changes the structure dynamics, which may produce unexpected modal behavior of the closed-loop system, usually not anticipated by the controller design approaches. A modal H∞ norm and a respective robust controller design framework were recently introduced, and this method is here extended to face a new DTAC strategy implementation. Considering that damage affects each vibration mode differently, this paper adopts the modal H∞ norm to include damage as a design requirement. The basic idea is to create an appropriate energy distribution over the frequency range of interest and respective vibration modes, guaranteeing robustness, damage tolerance, and adequate overall performance, taking into account that it is common to have previous knowledge of the structure regions where damage may occur during its operational life. For this purpose, a structural health monitoring technique is applied to evaluate modal modifications caused by damage. This information is used to create modal weighing matrices, conducting to the modal H∞ controller design. Finite element models are adopted for a case study structure, including different damage severities, in order to validate the proposed control strategy. Results show the effectiveness of the proposed methodology with respect to damage tolerance.

  17. A definition of the degree of controllability - A criterion for actuator placement

    Science.gov (United States)

    Viswanathan, C. N.; Longman, R. W.; Likins, P. W.

    1979-01-01

    The unsolved problem of how to control the attitude and shape of future very large flexible satellite structures represents a challenging problem for modern control theory. One aspect of this problem is the question of how to choose the number and locations throughout the spacecraft of the control system actuators. Starting from basic physical considerations, this paper develops a concept of the degree of controllability of a control system, and then develops numerical methods to generate approximate values of the degree of controllability for any spacecraft. These results offer the control system designer a tool which allows him to rank the effectiveness of alternative actuator distributions, and hence to choose the actuator locations on a rational basis. The degree of controllability is shown to take a particularly simple form when the satellite dynamics equations are in modal form. Examples are provided to illustrate the use of the concept on a simple flexible spacecraft.

  18. Maneuver Planning for Conjunction Risk Mitigation with Ground-track Control Requirements

    Science.gov (United States)

    McKinley, David

    2008-01-01

    The planning of conjunction Risk Mitigation Maneuvers (RMM) in the presence of ground-track control requirements is analyzed. Past RMM planning efforts on the Aqua, Aura, and Terra spacecraft have demonstrated that only small maneuvers are available when ground-track control requirements are maintained. Assuming small maneuvers, analytical expressions for the effect of a given maneuver on conjunction geometry are derived. The analytical expressions are used to generate a large trade space for initial RMM design. This trade space represents a significant improvement in initial maneuver planning over existing methods that employ high fidelity maneuver models and propagation.

  19. Ways of Improvement of State Finance Control in Ukraine: Definition and Justification

    OpenAIRE

    Azarenkova Halyna M.

    2013-01-01

    The article proves urgency of the issue of improvement of the state finance control. It generalises and systemises shortcomings of the state finance control under modern conditions. It systemises generalised shortcomings and analysis of certain shortcomings with the purpose of identifying their weight. It identifies and justifies ways of improvement of the state finance control in Ukraine. It provides interrelation of the proposed ways of improvement of the state finance control with the spec...

  20. A definition of normovolaemia and consequences for cardiovascular control during orthostatic and environmental stress

    DEFF Research Database (Denmark)

    Truijen, Jasper; Bundgaard-Nielsen, Morten; van Lieshout, Johannes J

    2010-01-01

    that a given central blood volume may be associated with markedly different central vascular pressures. The central blood volume varies with posture and, consequently, stroke volume and cardiac output (Q) are affected, but with the increased central blood volume during head-down tilt, stroke volume and Q do...... not increase further indicating that in the supine resting position the heart operates on the plateau of the Frank-Starling curve which, therefore, may be taken as a functional definition of normovolaemia. Since the capacity of the vascular system surpasses the blood volume, orthostatic and environmental...... stress including bed rest/microgravity, exercise and training, thermal loading, illness, and trauma/haemorrhage is likely to restrict venous return and Q. Consequently the cardiovascular responses are determined primarily by their effect on the central blood volume. Thus during environmental stress, flow...

  1. What Is Asthma Control? Discrepancies between Parents' Perceptions and Official Definitions

    Science.gov (United States)

    Dozier, Ann; Aligne, C. Andrew; Schlabach, Mary Beth

    2006-01-01

    National guidelines define asthma control as the prevention of asthma symptoms rather than the treatment of asthma exacerbations. We hypothesized that we would find a discrepancy between what parents consider adequate control compared to what health care professionals mean by "control." Data from a telephone survey conducted for the…

  2. Power Control and Monitoring Requirements for Thermal Vacuum/Thermal Balance Testing of the MAP Observatory

    Science.gov (United States)

    Johnson, Chris; Hinkle, R. Kenneth (Technical Monitor)

    2002-01-01

    The specific heater control requirements for the thermal vacuum and thermal balance testing of the Microwave Anisotropy Probe (MAP) Observatory at the Goddard Space Flight Center (GSFC) in Greenbelt, Maryland are described. The testing was conducted in the 10m wide x 18.3m high Space Environment Simulator (SES) Thermal Vacuum Facility. The MAP thermal testing required accurate quantification of spacecraft and fixture power levels while minimizing heater electrical emissions. The special requirements of the MAP test necessitated construction of five (5) new heater racks.

  3. Pascal software structures achieve definite control of the 24 MFTF sustaining neutral-beam power supplies

    International Nuclear Information System (INIS)

    Anon.

    1982-01-01

    Precise control of large, complex systems is not assured unless there is known to be no unintended interactions in the control system. The software controlling the sustaining neutral-beam power supplies of the Mirror Fusion Test Facility accomplishes this feat. The software structures comprise some 16,000 lines of commented Pascal code, distributed amoung 10 different tasks. Each task may control any of the 24 power supplies. All the tasks are strictly event-driven, and are not subject to any system mode. Since there is no global information in the software, we know that all the power supplies are controlled independently

  4. Definition of the topological structure of the automatic control system of spacecrafts

    International Nuclear Information System (INIS)

    KrasnoyarskiyRabochiy prospect, Krasnoyarsk, 660014 (Russian Federation))" data-affiliation=" (Siberian State Aerospace University named after Academician M.F.Reshetnev 31 KrasnoyarskiyRabochiy prospect, Krasnoyarsk, 660014 (Russian Federation))" >Zelenkov, P V; KrasnoyarskiyRabochiy prospect, Krasnoyarsk, 660014 (Russian Federation))" data-affiliation=" (Siberian State Aerospace University named after Academician M.F.Reshetnev 31 KrasnoyarskiyRabochiy prospect, Krasnoyarsk, 660014 (Russian Federation))" >Karaseva, M V; KrasnoyarskiyRabochiy prospect, Krasnoyarsk, 660014 (Russian Federation))" data-affiliation=" (Siberian State Aerospace University named after Academician M.F.Reshetnev 31 KrasnoyarskiyRabochiy prospect, Krasnoyarsk, 660014 (Russian Federation))" >Tsareva, E A; Tsarev, R Y

    2015-01-01

    The paper considers the problem of selection the topological structure of the automated control system of spacecrafts. The integer linear model of mathematical programming designed to define the optimal topological structure for spacecraft control is proposed. To solve the determination problem of topological structure of the control system of spacecrafts developed the procedure of the directed search of some structure variants according to the scheme 'Branch and bound'. The example of the automated control system of spacecraft development included the combination of ground control stations, managing the spacecraft of three classes with a geosynchronous orbit with constant orbital periods is presented

  5. Development Requirements for the Exploration PLSS (xPLSS) Carbon Dioxide and Humidity Control Unit (CDHCU)

    Science.gov (United States)

    Chullen, Cinda

    2017-01-01

    Functional Requirements for the Carbon Dioxide and Humidity Control Unit (CDHCU): The CDHCU is a component of the Exploration Portable Life Support System (xPLSS) to provide carbon dioxide (CO2) and humidity control within the spacesuit for a crewmember to perform extravehicular activities (EVA) in vacuum (micro-g), lunar, and Mars environments for up to 8 hours continuous, and during EVA preparation in airlocks or support vehicles for an additional 2 hours (TBR) continuous.

  6. HLA-Cw Allele Frequency in Definite Meniere’s Disease Compared to Probable Meniere’s Disease and Healthy Controls in an Iranian Sample

    Directory of Open Access Journals (Sweden)

    Sasan Dabiri

    2016-05-01

    Full Text Available Introduction Several lines of evidence support the contribution of autoimmune mechanisms in the pathogenesis of Meniere’s disease. The aim of this study was determining the association between HLA-Cw Alleles in patients with definite Meniere’s disease and patients with probable Meniere’s disease and a control group.  Materials and Methods: HLA-Cw genotyping was performed in 23 patients with definite Meniere’s disease, 24 with probable Meniere’s disease, and 91 healthy normal subjects, using sequence specific primers polymerase chain reaction technique. The statistical analysis was performed using stata 8 software.  Results: There was a significant association between HLA-Cw*04 and HLA-Cw*16 in both definite and probable Meniere’s disease compared to normal healthy controls. We observed a significant difference in HLA-Cw*12 frequencies between patients with definite Meniere’s disease compared to patients with probable Meniere’s disease (P=0.04. The frequency of HLA-Cw*18 is significantly higher in healthy controls (P=0.002.  Conclusion: Our findings support the rule of HLA-Cw Alleles in both definite and probable Meniere’s disease. In addition, differences in HLA-Cw*12 frequency in definite and probable Meniere’s disease in our study’s population might indicate distinct immune and inflammatory mechanisms involved in each condition.

  7. A degree of controllability definition - Fundamental concepts and application to modal systems

    Science.gov (United States)

    Viswanathan, C. N.; Longman, R. W.; Likins, P. W.

    1984-01-01

    Starting from basic physical considerations, this paper develops a concept of the degree of controllability of a control system, and then develops numerical methods to generate approximate values of the degree of controllability for any linear time-invariant system. In many problems, such as the control of future, very large, flexible spacecraft and certain chemical process control problems, the question of how to choose the number and locations of the control system actuators is an important one. The results obtained here offer the control system designer a tool which allows him to rank the effectiveness of alternative actuator distributions, and hence to choose the actuator locations on a rational basis. The degree of controllability is shown to take a particularly simple form when the dynamic equations of a satellite are in second-order modal form. The degree of controllability concept has still other fundamental uses - it allows one to study the system structural relations between the various inputs and outputs of a linear system, which has applications to decoupling and model reduction.

  8. Evaluation of Requirements for Volt/Var Control and Optimization Function in Distribution Management Systems

    DEFF Research Database (Denmark)

    Rahimi, Saaed; Marinelli, Mattia; Silvestro, Federico

    2012-01-01

    To meet the requirement from new visions within “smart grid” and to provide solutions for many challenges that DSOs (Distribution System Operators) are facing today, we need to develop advanced DMS (Distribution Management System) applications. A centralized Volt/Var Control (VVC) is one of the m...

  9. 76 FR 23615 - Notice of Submission of Proposed Information Collection to OMB; Quality Control Requirements for...

    Science.gov (United States)

    2011-04-27

    ... Proposed Information Collection to OMB; Quality Control Requirements for Direct Endorsement Lenders AGENCY... proposal. This information is collected from Direct Endorsement lenders in order to meet FHA's quality... Lenders. OMB Approval Number: 2502-Pending. Form Numbers: None. Description of the Need for the...

  10. An overview of exhaust emissions regulatory requirements and control technology for stationary natural gas engines

    International Nuclear Information System (INIS)

    Ballard, H.N.; Hay, S.C.; Shade, W.N. Jr.

    1992-01-01

    In this paper a practical overview of stationary natural gas engine exhaust emissions control technology and trends in emissions regulatory requirements is presented. Selective and non-selective catalytic reduction and lean burn technologies are compared. Particular emphasis is focussed on implications of the Clean Air Act of 1990. Recent emissions reduction conversion kit developments and a practical approach to continuous monitoring are discussed

  11. Analysis of Timing Requirements for Data Aggregation and Control in Smart Grids

    DEFF Research Database (Denmark)

    Kemal, Mohammed Seifu; Olsen, Rasmus Løvenstein

    2014-01-01

    Modern communication mechanisms are at the heart of a smart grid system to ensure that the required information is transmitted within various components of the grid. Throughout this paper, we have studied how communication performance delays and smart grid controller delays effects the overall co...

  12. 78 FR 51078 - Reporting Requirements for Positive Train Control Expenses and Investments

    Science.gov (United States)

    2013-08-20

    ...] Reporting Requirements for Positive Train Control Expenses and Investments AGENCY: Surface Transportation... investments and expenses. PTC is an automated system designed to prevent train-to-train collisions and other..., PTC expenditures are incorporated into the R-1 under the category of ``capital investments and...

  13. A comparison of the difference of requirements between functional safety and nuclear safety controllers

    Energy Technology Data Exchange (ETDEWEB)

    Chen, C.K.; Lee, C.L.; Shyu, S.S. [Inst. of Nuclear Energy Research, Taoyuan, Taiwan (China)

    2014-07-01

    In order to establish self-reliant capabilities of nuclear I&C systems in Taiwan, Taiwan's Nuclear I&C System (TNICS) project had been established by Institute of Nuclear Energy Research (INER). A Triple Modular Redundant (TMR) safety controller (SCS-2000) has been completed and gone through the IEC 61508 Safety Integrity Level 3 (SIL3) certification of Functional Safety for industries. Based on the certification processes, the difference of requirements between Functional Safety and Nuclear Safety controllers in term of hardware and software are addressed in this study. Besides, the measures used to determine and verify the reliability of the safety control system design are presented. (author)

  14. Factors affecting geographic market definition and merger control for the Dutch electricity sector. Final report. Non-confidential version

    International Nuclear Information System (INIS)

    Moselle, B.; Newbery, D.; Harris, D.

    2006-06-01

    The NMA (Netherlands Competition Authority NMa) asked The Brattle Group to analyse: (1) Factors that would affect geographic market definition for the purpose of merger control in the Dutch electric power industry; and (2) The competitive effects of some specific (hypothetical) mergers in that industry. This study does not refer to any actual merger proceedings, and the NMa have not asked to analyse any mergers of which they have been notified. All mergers analysed are hypothetical. This study is performed using both statistical analysis of historical data, and results from a comprehensive model of the European power market, the Brattle Annual Model (BAM). Standard tools of competitive analysis are used, including the so-called SSNIP test (Small but Significant and Non-transitory Increase in Price) for geographic market definition, and measures of concentration (market shares, Hirschmann-Herfindahl Indices (HHIs), which are used to examine horizontal issues in competitive analysis, and Pivotal Supply Index) for merger analysis, as well as more sophisticated economic modelling (e.g., Cournot model)

  15. Endoplasmic reticulum stress pathway required for immune homeostasis is neurally controlled by arrestin-1.

    Science.gov (United States)

    Singh, Varsha; Aballay, Alejandro

    2012-09-28

    In response to pathogen infection, the host innate immune system activates microbial killing pathways and cellular stress pathways that need to be balanced because insufficient or excessive immune responses have deleterious consequences. Recent studies demonstrate that two G protein-coupled receptors (GPCRs) in the nervous system of Caenorhabditis elegans control immune homeostasis. To investigate further how GPCR signaling controls immune homeostasis at the organismal level, we studied arrestin-1 (ARR-1), which is the only GPCR adaptor protein in C. elegans. The results indicate that ARR-1 is required for GPCR signaling in ASH, ASI, AQR, PQR, and URX neurons, which control the unfolded protein response and a p38 mitogen-activated protein kinase signaling pathway required for innate immunity. ARR-1 activity also controlled immunity through ADF chemosensory and AFD thermosensory neurons that regulate longevity. Furthermore, we found that although ARR-1 played a key role in the control of immunity by AFD thermosensory neurons, it did not control longevity through these cells. However, ARR-1 partially controlled longevity through ADF neurons.

  16. Semi-definite relaxations for optimal control problems with oscillation and concentration effects

    Czech Academy of Sciences Publication Activity Database

    Claeys, M.; Henrion, D.; Kružík, Martin

    2017-01-01

    Roč. 23, č. 1 (2017), s. 95-117 ISSN 1292-8119 Institutional support: RVO:67985556 Keywords : optimal control * impulsive control * semidefinite programming Subject RIV: BA - General Mathematics OBOR OECD: Pure mathematics Impact factor: 1.540, year: 2016 http://library.utia.cas.cz/separaty/2017/MTR/kruzik-0470207.pdf

  17. Framework for establishing records control in hospitals as an ISO 9001 requirement.

    Science.gov (United States)

    Al-Qatawneh, Lina

    2017-02-13

    Purpose The purpose of this paper is to present the process followed to control records in a Jordanian private community hospital as an ISO 9001:2008 standard requirement. Design/methodology/approach Under the hospital quality council's supervision, the quality management and development office staff were responsible for designing, planning and implementing the quality management system (QMS) using the ISO 9001:2008 standard. A policy for records control was established. An action plan for establishing the records control was developed and implemented. On completion, a coding system for records was specified to be used by hospital staff. Finally, an internal audit was performed to verify conformity to the ISO 9001:2008 standard requirements. Findings Successful certification by a neutral body ascertained that the hospital's QMS conformed to the ISO 9001:2008 requirements. A framework was developed that describes the records controlling process, which can be used by staff in any healthcare organization wanting to achieve ISO 9001:2008 accreditation. Originality/value Given the increased interest among healthcare organizations to achieve the ISO 9001 certification, the proposed framework for establishing records control is developed and is expected to be a valuable management tool to improve and sustain healthcare quality.

  18. Common definition for categories of clinical research: a prerequisite for a survey on regulatory requirements by the European Clinical Research Infrastructures Network (ECRIN

    Directory of Open Access Journals (Sweden)

    Sanz Nuria

    2009-10-01

    Full Text Available Abstract Background Thorough knowledge of the regulatory requirements is a challenging prerequisite for conducting multinational clinical studies in Europe given their complexity and heterogeneity in regulation and perception across the EU member states. Methods In order to summarise the current situation in relation to the wide spectrum of clinical research, the European Clinical Research Infrastructures Network (ECRIN developed a multinational survey in ten European countries. However a lack of common classification framework for major categories of clinical research was identified, and therefore reaching an agreement on a common classification was the initial step in the development of the survey. Results The ECRIN transnational working group on regulation, composed of experts in the field of clinical research from ten European countries, defined seven major categories of clinical research that seem relevant from both the regulatory and the scientific points of view, and correspond to congruent definitions in all countries: clinical trials on medicinal products; clinical trials on medical devices; other therapeutic trials (including surgery trials, transplantation trials, transfusion trials, trials with cell therapy, etc.; diagnostic studies; clinical research on nutrition; other interventional clinical research (including trials in complementary and alternative medicine, trials with collection of blood or tissue samples, physiology studies, etc.; and epidemiology studies. Our classification was essential to develop a survey focused on protocol submission to ethics committees and competent authorities, procedures for amendments, requirements for sponsor and insurance, and adverse event reporting following five main phases: drafting, consensus, data collection, validation, and finalising. Conclusion The list of clinical research categories as used for the survey could serve as a contribution to the, much needed, task of harmonisation and

  19. Common definition for categories of clinical research: a prerequisite for a survey on regulatory requirements by the European Clinical Research Infrastructures Network (ECRIN)

    LENUS (Irish Health Repository)

    Kubiak, Christine

    2009-10-16

    Abstract Background Thorough knowledge of the regulatory requirements is a challenging prerequisite for conducting multinational clinical studies in Europe given their complexity and heterogeneity in regulation and perception across the EU member states. Methods In order to summarise the current situation in relation to the wide spectrum of clinical research, the European Clinical Research Infrastructures Network (ECRIN) developed a multinational survey in ten European countries. However a lack of common classification framework for major categories of clinical research was identified, and therefore reaching an agreement on a common classification was the initial step in the development of the survey. Results The ECRIN transnational working group on regulation, composed of experts in the field of clinical research from ten European countries, defined seven major categories of clinical research that seem relevant from both the regulatory and the scientific points of view, and correspond to congruent definitions in all countries: clinical trials on medicinal products; clinical trials on medical devices; other therapeutic trials (including surgery trials, transplantation trials, transfusion trials, trials with cell therapy, etc.); diagnostic studies; clinical research on nutrition; other interventional clinical research (including trials in complementary and alternative medicine, trials with collection of blood or tissue samples, physiology studies, etc.); and epidemiology studies. Our classification was essential to develop a survey focused on protocol submission to ethics committees and competent authorities, procedures for amendments, requirements for sponsor and insurance, and adverse event reporting following five main phases: drafting, consensus, data collection, validation, and finalising. Conclusion The list of clinical research categories as used for the survey could serve as a contribution to the, much needed, task of harmonisation and simplification of the

  20. Requirements Engineering for Reactive Systems: Coloured Petri Nets for an Elevator Controller

    DEFF Research Database (Denmark)

    Jørgensen, Jens Bæk; Fernandes, Joao Miguel; Tjell, Simon

    2007-01-01

    This paper presents a model-based approach to requirements engineering for reactive systems; we use an elevator controller as case study. We identify and justify two key properties that a model which we construct must have, namely: (1) controller-and-environment-partitioned, which means...... constituting a description of both the controller and the environment, and distinguishing between these two domains and between desired and assumed behaviour; (2) use case-based, which means constructed on the basis of a given use case diagram and reproducing the behaviour described in accompanying scenario...... descriptions. For the case study, we build an executable model in the formal modelling language Coloured Petri Nets. We demonstrate how this model is useful for requirements engineering, since it provides a solid basis for addressing behavioural issues early in the development process, for example regarding...

  1. Requirements for quality control of analytical data for the Environmental Restoration Program

    International Nuclear Information System (INIS)

    Engels, J.

    1992-12-01

    The Environmental Restoration (ER) Program was established for the investigation and remediation of inactive US Department of Energy (DOE) sites and facilities that have been declared surplus in terms of their previous uses. The purpose of this document is to Specify ER requirements for quality control (QC) of analytical data. Activities throughout all phases of the investigation may affect the quality of the final data product, thus are subject to control specifications. Laboratory control is emphasized in this document, and field concerns will be addressed in a companion document Energy Systems, in its role of technical coordinator and at the request of DOE-OR, extends the application of these requirements to all participants in ER activities. Because every instance and concern may not be addressed in this document, participants are encouraged to discuss any questions with the ER Quality Assurance (QA) Office, the Analytical Environmental Support Group (AESG), or the Analytical Project Office (APO)

  2. Spacecraft guidance, navigation, and control requirements for an intelligent plug-n-play avionics (PAPA) architecture

    Science.gov (United States)

    Kulkarni, Nilesh; Krishnakumar, Kalmaje

    2005-01-01

    The objective of this research is to design an intelligent plug-n-play avionics system that provides a reconfigurable platform for supporting the guidance, navigation and control (GN&C) requirements for different elements of the space exploration mission. The focus of this study is to look at the specific requirements for a spacecraft that needs to go from earth to moon and back. In this regard we will identify the different GN&C problems in various phases of flight that need to be addressed for designing such a plug-n-play avionics system. The Apollo and the Space Shuttle programs provide rich literature in terms of understanding some of the general GN&C requirements for a space vehicle. The relevant literature is reviewed which helps in narrowing down the different GN&C algorithms that need to be supported along with their individual requirements.

  3. Real time MHD mode control using ECCD in KSTAR: Plan and requirements

    Energy Technology Data Exchange (ETDEWEB)

    Joung, M.; Woo, M. H.; Jeong, J. H.; Hahn, S. H.; Yun, S. W.; Lee, W. R.; Bae, Y. S.; Oh, Y. K.; Kwak, J. G.; Yang, H. L. [National Fusion Research Institute, 52 Eoeun-dong, Yuseong-gu, Daejeon (Korea, Republic of); Namkung, W.; Park, H.; Cho, M. H. [Department of Physics, POSTECH, Hyoja-dong, Nam-gu, Pohang, Gyeongangbuk-do (Korea, Republic of); Kim, M. H.; Kim, K. J.; Na, Y. S. [Department of Nuclear Engineering, Seoul National University, Daehak-dong, Gwanak-gu, Seoul (Korea, Republic of); Hosea, J.; Ellis, R. [Princeton Plasma Physics Laboratory, Princeton (United States)

    2014-02-12

    For a high-performance, advanced tokamak mode in KSTAR, we have been developing a real-time control system of MHD modes such as sawtooth and Neo-classical Tearing Mode (NTM) by ECH/ECCD. The active feedback control loop will be also added to the mirror position and the real-time detection of the mode position. In this year, for the stabilization of NTM that is crucial to plasma performance we have implemented open-loop ECH antenna control system in KSTAR Plasma Control System (PCS) for ECH mirror movement during a single plasma discharge. KSTAR 170 GHz ECH launcher which was designed and fabricated by collaboration with PPPL and POSTECH has a final mirror of a poloidally and toroidally steerable mirror. The poloidal steering motion is only controlled in the real-time NTM control system and its maximum steering speed is 10 degree/sec by DC motor. However, the latency of the mirror control system and the return period of ECH antenna mirror angle are not fast because the existing launcher mirror control system is based on PLC which is connected to the KSTAR machine network through serial to LAN converter. In this paper, we present the design of real time NTM control system, ECH requirements, and the upgrade plan.

  4. Account of requirements for modernization in VPBER-600 enhanced safety reactor instrumentation and control system development

    International Nuclear Information System (INIS)

    Shashkin, S.L.; Pobedonostsev, A.B.; Drumov, V.V.; Chudin, A.G.

    1993-01-01

    Nuclear power plant (NPP) with VPBER-600 reactor is a station of new generation. The specified term of reactor plant operation is 60 years and taking into account that the proposed term of starting the first power unit is on the turn of centuries one can definitely state that for Russia conditions VPBER-600 is a plant of 21 century. Such far removed term for NPP now in the stage of development as it can seem does not put the problems of modernization as first order tasks. But open-quotes...who does not think about future lives in the past.close quotes It is that the NPP instrumentation and control (I ampersand C) systems are in the most degree subjected to the influence of factors which favor their modifications. These factors can be arbitrarily divided into two groups: (1) inner factors, i.e. changes (failures, aging, etc) in I ampersand C components as well as changes dictated by technological reasons (change of equipment composition, control algorithms, operation modes); (2) outer factors, i.e. intensive development of information technologies and rapid improvement of electronic components. This presentation addresses the problem of modernization of the safety instrumentation for this next generation facility, and the research effort it will entail. The system is designed to allow for modernization, and the relatively easy adoption of new instrumentation and technology as it becomes available

  5. High-definition polymeric membranes: construction of 3D lithographed channel arrays through control of natural building blocks dynamics.

    Science.gov (United States)

    Speranza, Valentina; Trotta, Francesco; Drioli, Enrico; Gugliuzza, Annarosa

    2010-02-01

    The fabrication of well-defined interfaces is in high demand in many fields of biotechnologies. Here, high-definition membrane-like arrays are developed through the self-assembly of water droplets, which work as natural building blocks for the construction of ordered channels. Solution viscosity together with the dynamics of the water droplets can decide the final formation of three-dimensional well-ordered patterns resembling anodic structures, especially because solvents denser than water are used. Particularly, the polymer solution viscosity is demonstrated to be a powerful tool for control of the mobility of submerged droplets during the microfabrication process. The polymeric patterns are structured at very high levels of organization and exhibit well-established transport-surface property relationships, considered basics for any types of advanced biotechnologies.

  6. Inclusion and definition of acute renal dysfunction in critically ill patients in randomized controlled trials: a systematic review.

    Science.gov (United States)

    da Hora Passos, Rogerio; Ramos, Joao Gabriel Rosa; Gobatto, André; Caldas, Juliana; Macedo, Etienne; Batista, Paulo Benigno

    2018-04-24

    In evidence-based medicine, multicenter, prospective, randomized controlled trials (RCTs) are the gold standard for evaluating treatment benefits and ensuring the effectiveness of interventions. Patient-centered outcomes, such as mortality, are most often the preferred evaluated outcomes. While there is currently agreement on how to classify renal dysfunction in critically ill patients , the application frequency of this new classification system in RCTs has not previously been evaluated. In this study, we aim to assess the definition of renal dysfunction in multicenter RCTs involving critically ill patients that included mortality as a primary endpoint. A comprehensive search was conducted for publications reporting multicenter randomized controlled trials (RCTs) involving adult patients in intensive care units (ICUs) that included mortality as a primary outcome. MEDLINE and PUBMED were queried for relevant articles in core clinical journals published between May 2004 and December 2017. Of 418 articles reviewed, 46 multicenter RCTs with a primary endpoint related to mortality were included. Thirty-six (78.3%) of the trial reports provided information on renal function in the participants. Only seven articles (15.2%) included mean or median serum creatinine levels, mean creatinine clearance or estimated glomerular filtration rates. Sequential organ failure assessment (SOFA) score was the most commonly used definition of renal dysfunction (20 studies; 43.5%). Risk, Injury, Failure, Loss, End-stage renal disease (RIFLE), Acute Kidney Injury Network (AKIN) and Kidney Disease Improving Global Outcomes (KDIGO) criteria were used in five (10.9%) trials. In thirteen trials (28.3%), no renal dysfunction criteria were reported. Only one trial excluded patients with renal dysfunction, and it used urinary output or need for renal replacement therapy (RRT) as criteria for this diagnosis. The presence of renal dysfunction was included as a baseline patient characteristic in

  7. Safety requirements laid down in the Atomic Energy Law and in the Law on Immission Control

    International Nuclear Information System (INIS)

    Hansmann, K.

    1981-01-01

    The paper deals with safety requirements relating to installations, laid down in the Atomic Energy Law and in the Law on Immission Control. Actually it is a matter of how the safety requirements of sect. 7 of the Atomic Energy Law can be compared with those laid down in the sections 5 and 6 of the Federal Act for the Protection Against Nuisances. In the process, three comparative levels are examined: 1. The normative conditions concerning the licencability of hazardous installations, 2. those demands that go way beyond that in order to reduce residual risks, and 3. the licensing authorities' scope of discretion. (orig./HP) [de

  8. Hazardous Waste Remedial Actions Program requirements for quality control of analytical data

    International Nuclear Information System (INIS)

    Miller, M.S.; Zolyniak, J.W.

    1988-08-01

    The Hazardous Waste Remedial Action Program (HAZWRAP) is involved in performing field investigations and sample analysis pursuant to the NCP for the Department of Energy and other federal agencies. The purpose of this document is to specify the requirements for the control of the accuracy, precision and completeness of the samples, and data from the point of collection through analysis. The requirements include data reduction and reporting of the resulting environmentally related data. Because every instance and concern may not be addressed in this document, HAZWRAP subcontractors are encouraged to discuss any questions with the HAZWRAP Project Manager hereafter identified as the Project Manager

  9. FGF signaling via MAPK is required early and improves Activin A-induced definitive endoderm formation from human embryonic stem cells

    Energy Technology Data Exchange (ETDEWEB)

    Sui, Lina, E-mail: linasui@vub.ac.be [Cell Differentiation Unit, Diabetes Research Center, Vrije Universiteit Brussel (VUB), Laarbeeklaan 103, 1090 Brussels (Belgium); Mfopou, Josue K. [Cell Differentiation Unit, Diabetes Research Center, Vrije Universiteit Brussel (VUB), Laarbeeklaan 103, 1090 Brussels (Belgium); Geens, Mieke; Sermon, Karen [Department of Embryology and Genetics, Vrije Universiteit Brussel (VUB), Laarbeeklaan 103, 1090 Brussels (Belgium); Bouwens, Luc [Cell Differentiation Unit, Diabetes Research Center, Vrije Universiteit Brussel (VUB), Laarbeeklaan 103, 1090 Brussels (Belgium)

    2012-09-28

    Highlights: Black-Right-Pointing-Pointer Deep study the FGF signaling role during DE specification in the context of hESCs. Black-Right-Pointing-Pointer DE differentiation from hESCs has an early dependence on FGF signaling. Black-Right-Pointing-Pointer A serum-free DE protocol is developed based on the findings. Black-Right-Pointing-Pointer The DE cells showed potential to differentiate into pancreatic progenitor cells. -- Abstract: Considering their unlimited proliferation and pluripotency properties, human embryonic stem cells (hESCs) constitute a promising resource applicable for cell replacement therapy. To facilitate this clinical translation, it is critical to study and understand the early stage of hESCs differentiation wherein germ layers are defined. In this study, we examined the role of FGF signaling in Activin A-induced definitive endoderm (DE) differentiation in the absence of supplemented animal serum. We found that activated FGF/MAPK signaling is required at the early time point of Activin A-induced DE formation. In addition, FGF activation increased the number of DE cells compared to Activin A alone. These DE cells could further differentiate into PDX1 and NKX6.1 positive pancreatic progenitors in vitro. We conclude that Activin A combined with FGF/MAPK signaling efficiently induce DE cells in the absence of serum. These findings improve our understanding of human endoderm formation, and constitute a step forward in the generation of clinical grade hESCs progenies for cell therapy.

  10. FGF signaling via MAPK is required early and improves Activin A-induced definitive endoderm formation from human embryonic stem cells

    International Nuclear Information System (INIS)

    Sui, Lina; Mfopou, Josué K.; Geens, Mieke; Sermon, Karen; Bouwens, Luc

    2012-01-01

    Highlights: ► Deep study the FGF signaling role during DE specification in the context of hESCs. ► DE differentiation from hESCs has an early dependence on FGF signaling. ► A serum-free DE protocol is developed based on the findings. ► The DE cells showed potential to differentiate into pancreatic progenitor cells. -- Abstract: Considering their unlimited proliferation and pluripotency properties, human embryonic stem cells (hESCs) constitute a promising resource applicable for cell replacement therapy. To facilitate this clinical translation, it is critical to study and understand the early stage of hESCs differentiation wherein germ layers are defined. In this study, we examined the role of FGF signaling in Activin A-induced definitive endoderm (DE) differentiation in the absence of supplemented animal serum. We found that activated FGF/MAPK signaling is required at the early time point of Activin A-induced DE formation. In addition, FGF activation increased the number of DE cells compared to Activin A alone. These DE cells could further differentiate into PDX1 and NKX6.1 positive pancreatic progenitors in vitro. We conclude that Activin A combined with FGF/MAPK signaling efficiently induce DE cells in the absence of serum. These findings improve our understanding of human endoderm formation, and constitute a step forward in the generation of clinical grade hESCs progenies for cell therapy.

  11. Primary Definitive Procedure versus Conventional Three-staged Procedure for the Management of Low-type Anorectal Malformation in Females: A Randomized Controlled Trial.

    Science.gov (United States)

    Gupta, Alisha; Agarwala, Sandeep; Sreenivas, Vishnubhatla; Srinivas, Madhur; Bhatnagar, Veereshwar

    2017-01-01

    Females with Krickenbeck low-type anorectal malformations - vestibular fistula (VF) and perineal fistula (PF) - are managed either by a primary definitive or conventional three-staged approach. Ultimate outcome in these children may be affected by wound dehiscence leading to healing by fibrosis. Most of the literature favors one approach over other based on retrospective analysis of their outcomes. Whether a statistically significant difference in wound dehiscence rates between these approaches exists needed to be seen. A randomized controlled trial for girls <14 years with VF or PF was done. Random tables were used to randomize 33 children to Group I (primary procedure) and 31 to Group II (three-staged procedure). Statistical analysis was done for significance of difference ( P < 0.05) in the primary outcome (wound dehiscence) and secondary outcomes (immediate and early postoperative complications). Of the 64 children randomized, 54 (84%) had VF. Both groups were comparable in demography, clinical profile and age at surgery. The incidence of wound dehiscence (39.4% vs. 18.2%; P = 0.04), immediate postoperative complications (51.5% vs. 12.9%; P = 0.001), and early postoperative complications (42.4% vs. 12.9%; P = 0.01) was significantly higher in Group I as compared to Group II. Six of 13 children (46.2%) with dehiscence in Group I required a diverting colostomy to be made. Females with VF or PF undergoing primary definitive procedure have a significantly higher incidence of wound dehiscence ( P = 0.04), immediate ( P = 0.001) and early postoperative complications ( P = 0.01).

  12. Cost account in agriculture with particular accordance to requirements of decision making process and controls

    Directory of Open Access Journals (Sweden)

    Tomasz Kondraszuk

    2009-01-01

    Full Text Available The article presents cost account applicability in the agricultural companies regarding the general theory of economic and organisation of enterprises. The main focus was laid down to analyse the unit total cost account with variable costs and their applicability in three spheres: stock valuation and profit, requirements of planning and decision making processes and controlling. It was concluded that cost calculation at the level of agricultural enterprise should be an inherent element of integrated information system at the level of registry, planning, decision making and control.

  13. Flood control design requirements and flood evaluation methods of inland nuclear power plant

    International Nuclear Information System (INIS)

    Zhang Ailing; Wang Ping; Zhu Jingxing

    2011-01-01

    Effect of flooding is one of the key safety factors and environmental factors in inland nuclear power plant sitting. Up to now, the rule of law and standard systems are established for the selection of nuclear power plant location and flood control requirements in China. In this paper flood control standards of China and other countries are introduced. Several inland nuclear power plants are taken as examples to thoroughly discuss the related flood evaluation methods. The suggestions are also put forward in the paper. (authors)

  14. 21 CFR 1300.03 - Definitions relating to electronic orders for controlled substances and electronic prescriptions...

    Science.gov (United States)

    2010-04-01

    ... systems auditor (CISA) means an individual who has been certified by the Information Systems Audit and Control Association as qualified to audit information systems and who performs compliance audits as a... records on its servers. Audit trail means a record showing who has accessed an information technology...

  15. 78 FR 37371 - Wassenaar Arrangement 2012 Plenary Agreements Implementation: Commerce Control List, Definitions...

    Science.gov (United States)

    2013-06-20

    ... Plenary). The Wassenaar Arrangement advocates implementation of effective export controls on strategic... component that is designed for a brand new type of item that has never been sold before, or that has not... rights management (DRM) functionality) were originally decontrolled by decontrol Note c. to 5A002. When...

  16. A definition of normovolaemia and consequences for cardiovascular control during orthostatic and environmental stress

    NARCIS (Netherlands)

    Truijen, Jasper; Bundgaard-Nielsen, Morten; van Lieshout, Johannes J.

    2010-01-01

    The Frank-Starling mechanism describes the relationship between stroke volume and preload to the heart, or the volume of blood that is available to the heart-the central blood volume. Understanding the role of the central blood volume for cardiovascular control has been complicated by the fact that

  17. 40 CFR 82.3 - Definitions for class I and class II controlled substances.

    Science.gov (United States)

    2010-07-01

    ... listed in appendix D to this subpart. Controlled products belong to one or more of the following six... substance or mixture must first be transferred from a bulk container to another container, vessel, or piece... recovered from a piece of equipment, including the name of the company responsible for, or owning the piece...

  18. Investigation of high-alpha lateral-directional control power requirements for high-performance aircraft

    Science.gov (United States)

    Foster, John V.; Ross, Holly M.; Ashley, Patrick A.

    1993-01-01

    Designers of the next-generation fighter and attack airplanes are faced with the requirements of good high angle-of-attack maneuverability as well as efficient high speed cruise capability with low radar cross section (RCS) characteristics. As a result, they are challenged with the task of making critical design trades to achieve the desired levels of maneuverability and performance. This task has highlighted the need for comprehensive, flight-validated lateral-directional control power design guidelines for high angles of attack. A joint NASA/U.S. Navy study has been initiated to address this need and to investigate the complex flight dynamics characteristics and controls requirements for high angle-of-attack lateral-directional maneuvering. A multi-year research program is underway which includes groundbased piloted simulation and flight validation. This paper will give a status update of this program that will include a program overview, description of test methodology and preliminary results.

  19. High-Level software requirements specification for the TWRS controlled baseline database system

    International Nuclear Information System (INIS)

    Spencer, S.G.

    1998-01-01

    This Software Requirements Specification (SRS) is an as-built document that presents the Tank Waste Remediation System (TWRS) Controlled Baseline Database (TCBD) in its current state. It was originally known as the Performance Measurement Control System (PMCS). Conversion to the new system name has not occurred within the current production system. Therefore, for simplicity, all references to TCBD are equivalent to PMCS references. This SRS will reference the PMCS designator from this point forward to capture the as-built SRS. This SRS is written at a high-level and is intended to provide the design basis for the PMCS. The PMCS was first released as the electronic data repository for cost, schedule, and technical administrative baseline information for the TAAS Program. During its initial development, the PMCS was accepted by the customer, TARS Business Management, with no formal documentation to capture the initial requirements

  20. 40 CFR 63.1583 - What are the emission points and control requirements for an industrial POTW treatment plant?

    Science.gov (United States)

    2010-07-01

    ... control requirements for an industrial POTW treatment plant? 63.1583 Section 63.1583 Protection of... Pollutants: Publicly Owned Treatment Works Industrial Potw Treatment Plant Description and Requirements § 63.1583 What are the emission points and control requirements for an industrial POTW treatment plant? (a...

  1. Basic Principles for Elaboration of Technical Requirements to Control and Protective TRB Turbine Systems

    Directory of Open Access Journals (Sweden)

    N. V. Panteley

    2007-01-01

    Full Text Available The paper considers and provides methodology for calculation of maximum over speeding value of a turbine rotor in the case when we face the failure of all its protective systems. It is presented a derivation of main equations required for making the calculation and the paper also cites results of their practical application at an industrial TRB (Turbine of the Republic of Belarus turbine while constructing its protective control systems.

  2. The effect of regulatory requirements on the control and instrumentation system designer

    International Nuclear Information System (INIS)

    Golder, J.A.

    1978-01-01

    The difficulties encountered by the designer of control and protection systems for nuclear plant in attempting to satisfy the large number of imprecise regulations and recommendations which exist are described. The absence of fundamental quantitative safety requirements of international acceptability is deplored and the adoption of a major incident criteria expressed in quantitative terms as the basis for the derivation of target design criteria for protection systems and plant components is suggested. (author)

  3. Timing and control requirements for a 32-channel AMU-ADC ASIC for the PHENIX detector

    International Nuclear Information System (INIS)

    Emery, M.S.; Ericson, M.N.; Britton, C.L. Jr.

    1998-01-01

    A custom CMOS Application Specific Integrated Circuit (ASIC) has been developed consisting of an analog memory unit (AMU) has been developed consisting of an analog memory unit (AMU) and analog to digital converter (ADC), both of which have been designed for applications in the PHENIX experiment. This IC consists of 32 pipes of analog memory with 64 cells per pipe. Each pipe also has its own ADC channel. Timing and control signal requirements for optimum performance are discussed in this paper

  4. Cell-specific differences in the requirements for translation quality control

    DEFF Research Database (Denmark)

    Reynolds, Noah M; Ling, Jiqiang; Roy, Hervé

    2010-01-01

    Protein synthesis has an overall error rate of approximately 10(-4) for each mRNA codon translated. The fidelity of translation is mainly determined by two events: synthesis of cognate amino acid:tRNA pairs by aminoacyl-tRNA synthetases (aaRSs) and accurate selection of aminoacyl-tRNAs (aa-tRNAs)...... divergent requirements for quality control in different cell compartments and suggest that the limits of translational accuracy may be largely determined by cellular physiology....

  5. Regulatory philosophy and requirements for radiation control in Canadian uranium mine-mill facilities

    International Nuclear Information System (INIS)

    Dory, A.B.

    1981-10-01

    The approach the Canadian Atomic Energy Control Board takes in licensing uranium mine/mill facilities is based on a minimum of rigidly set regulatory requirements. The regulations state only the basic objectives: the obligation to acquire a licence, some administrative and reporting requirements, and exposure limits. The regulations are supported by a set of regulatory guides. The operator always has the option of following different procedures if he can demonstrate that they will produce the same or better results. Good relationships exist between the AECB and mine management as well as trade unions. Under this approach, however, it is difficult to take action against uncooperative parties. The Board has decided that a somewhat more formalized system is necessary. New regulations are being drafted, giving more detailed licensing and administrative requirements and covering the areas of ventilation and worker and supervisor education more thoroughly

  6. Compliance of SLAC's Laser Safety Program with OSHA Requirements for the Control of Hazardous Energy

    International Nuclear Information System (INIS)

    Woods, M.

    2009-01-01

    SLAC's COHE program requires compliance with OSHA Regulation 29CFR1910.147, 'The control of hazardous energy (lockout/tagout)'. This regulation specifies lockout/tagout requirements during service and maintenance of equipment in which the unexpected energization or start up of the equipment, or release of stored energy, could cause injury to workers. Class 3B and Class 4 laser radiation must be considered as hazardous energy (as well as electrical energy in associated equipment, and other non-beam energy hazards) in laser facilities, and therefore requires careful COHE consideration. This paper describes how COHE is achieved at SLAC to protect workers against unexpected Class 3B or Class 4 laser radiation, independent of whether the mode of operation is normal, service, or maintenance

  7. Trajectory Orientation: A Technology-Enabled Concept Requiring a Shift in Controller Roles and Responsibilities

    Science.gov (United States)

    Leiden, Ken; Green, Steven

    2000-01-01

    The development of a decision support tool (DST) for the en-route domain with accurate conflict prediction time horizons of 20 minutes has introduced an interesting problem. A 20 minute time horizon for conflict prediction often results in the predicted conflict occurring one or more sectors downstream from the sector controller who "owns" (i-e., is responsible for the safe separation of aircraft) one or both of the aircraft in the conflict pair. Based on current roles and responsibilities of today's en route controllers, the upstream controller would not resolve this conflict. In most cases, the downstream controller would wait until the conflicting aircraft entered higher sector before resolving the conflict. This results in a delay of several minutes from the time when the conflict was initially predicted. This delay is inefficient from both a controller workload and user's cost of operations perspective. Trajectory orientation, a new concept for facilitating an efficient, conflict-free flight path across several sectors while conforming to metering or miles-in-trail spacing, is proposed as an alternative to today's sector-oriented method. This concept necessitates a fundamental shift in thinking about inter-sector coordination. Instead of operating independently, with the main focus on protecting their internal airspace, controllers would work cooperatively, depending on each other for well-planned, conflict-free flow of aircraft. To support the trajectory orientation concept, a long time horizon (15 to 20 minutes) for conflict prediction and resolution would most likely be a primary requirement. In addition, new tools, such as controller-pilot data link will be identified to determine their necessity and applicability for trajectory orientation. Finally, with significant controller participation from selected Air Route Traffic Control Centers, potential shifts in R-side/D-side roles and responsibilities as well as the creation of a new controller position for

  8. Energy Storage Requirements for PV Power Ramp Rate Control in Northern Europe

    Directory of Open Access Journals (Sweden)

    Julius Schnabel

    2016-01-01

    Full Text Available Photovoltaic (PV generators suffer from fluctuating output power due to the highly fluctuating primary energy source. With significant PV penetration, these fluctuations can lead to power system instability and power quality problems. The use of energy storage systems as fluctuation compensators has been proposed as means to mitigate these problems. In this paper, the behavior of PV power fluctuations in Northern European climatic conditions and requirements for sizing the energy storage systems to compensate them have been investigated and compared to similar studies done in Southern European climate. These investigations have been performed through simulations that utilize measurements from the Tampere University of Technology solar PV power station research plant in Finland. An enhanced energy storage charging control strategy has been developed and tested. Energy storage capacity, power, and cycling requirements have been derived for different PV generator sizes and power ramp rate requirements. The developed control strategy leads to lesser performance requirements for the energy storage systems compared to the methods presented earlier. Further, some differences on the operation of PV generators in Northern and Southern European climates have been detected.

  9. Biology and thermal requirements to Trichogramma spp. selection for Ecdytolopha aurantiana control

    International Nuclear Information System (INIS)

    Molina, Rosa M.S.; Parra, Jose R.P.

    2005-01-01

    The purpose of this work was to evaluate the potential of Trichogramma atopovirilia Oatman and Platner, 1983 and T. pretiosum Riley, 1879 as agents of control of Ecdytolopha aurantiana (Lima, 1927) (Lepidoptera: Tortricidae), an important Citrus pest in Sao Paulo State (South-East Brazil). In order to provide subsidies to programs of biological control with these parasitoids, studies of biology in different temperatures, thermal requirements and parasitism capacity were carried out. The temperatures (18, 20, 22, 25, 28, 30, and 32 deg C) did not affect the sex ratio, however, female longevity of both species was higher at 22 and 25 deg C. The temperature of 25 deg C tended to be more suitable to both emergency rate and female longevity. The egg-adult period for both Trichogramma species was inversely proportional to temperature. The thermal requirements of the two species were very close, about 108 DD (degree days). Neither the natural rearing host, E. aurantiana, nor the alternative host Anagasta kuehniella (Zeller, 1879) (Lepidoptera, Pyralidae), affected the number of parasitized eggs per Trichogramma female. The parasitism rate and the number of emerged adults per egg on E. aurantiana eggs were higher than on A. kuehniella eggs. However, the emergency rate was higher when the parasitoids were reared on A. kuehniella eggs. Both Trichogramma species could be tested in the field for citrus fruit borer control. The thermal requirements and the parasitism capacity also could be good parameters for selection of Trichogramma species/strains. (author)

  10. LDR structural experiment definition

    Science.gov (United States)

    Russell, R. A.

    1988-01-01

    A system study to develop the definition of a structural flight experiment for a large precision segmented reflector on the Space Station was accomplished by the Boeing Aerospace Company for NASA's Langley Research Center. The objective of the study was to use a Large Deployable Reflector (LDR) baseline configuration as the basis for focusing an experiment definition, so that the resulting accommodation requirements and interface constraints could be used as part of the mission requirements data base for Space Station. The primary objectives of the first experiment are to construct the primary mirror support truss and to determine its structural and thermal characteristics. Addition of an optical bench, thermal shield and primary mirror segments, and alignment of the optical components, would occur on a second experiment. The structure would then be moved to the payload point system for pointing, optical control, and scientific optical measurement for a third experiment. Experiment 1 will deploy the primary support truss while it is attached to the instrument module structure. The ability to adjust the mirror attachment points and to attach several dummy primary mirror segments with a robotic system will also be demonstrated. Experiment 2 will be achieved by adding new components and equipment to experiment one. Experiment 3 will demonstrate advanced control strategies, active adjustment of the primary mirror alignment, and technologies associated with optical sensing.

  11. Assistance tools for generic definition of ITER maintenance tasks and scenarios in advanced supervisory control systems

    International Nuclear Information System (INIS)

    Zieba, Stéphane; Russotto, François-Xavier; Da Silva Simoes, Max; Measson, Yvan

    2013-01-01

    Highlights: ► Improve supervisory control systems for ITER in-vessel and hot cell maintenance. ► Optimize remote handling operations effectiveness, reliability and safety. ► Provide a generic description of the maintenance tasks and scenarios. ► Development of context-based assistances for operators and supervisor. ► Improvement of operator's situation awareness. -- Abstract: This paper concerns the improvement of supervisory control systems in the context of remote handling for the maintenance tasks in ITER. This work aims at providing a single formalism and tools to define in a generic way the ITER maintenance tasks and scenarios for in-vessel and hot cell operations. A three-layered approach is proposed to model these tasks and scenarios. Physical actions are defined for the scene elements. From these physical actions, behaviours are defined to represent high-level functionalities. Finally, interaction modes define the way that behaviours are achieved in terms of human–machine interactions. Case study concerning the blanket maintenance procedure is discussed concerning the contributions of the descriptive model and the context-based assistances to the activities of supervisory control

  12. 40 CFR 141.521 - What updated watershed control requirements must my unfiltered system implement to continue to...

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false What updated watershed control... People Additional Watershed Control Requirements for Unfiltered Systems § 141.521 What updated watershed control requirements must my unfiltered system implement to continue to avoid filtration? Your system must...

  13. 21 CFR 111.110 - What quality control operations are required for laboratory operations associated with the...

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false What quality control operations are required for laboratory operations associated with the production and process control system? 111.110 Section 111.110 Food... § 111.110 What quality control operations are required for laboratory operations associated with the...

  14. Regional recurrence of oropharyngeal cancer after definitive radiotherapy: a case control study

    International Nuclear Information System (INIS)

    Söderström, Karin; Nilsson, Per; Dalianis, Tina; Kjellén, Elisabeth; Zackrisson, Björn

    2015-01-01

    Elective treatment of lymph nodes in oropharyngeal cancer (OPC) has impact on both regional recurrences (RR) and risk of late side effects. This study was performed to quantify the dose-dependent impact on RR and overall survival (OS) in a prospectively collected cohort of OPC from the ARTSCAN study with emphasis on elective treatment. ARTSCAN is a previously published prospective, randomized, multicentre study of altered radiotherapy (RT) fractionation in head and neck cancer. In ARTSCAN the elective treatment volume for node positive OPC varied significantly between centres due to local treatment principles. All patients with OPC in complete response after primary treatment were eligible for the present case–control study. Cases were patients with RR during five years follow-up. Patients with no recurrence were eligible as controls. Four controls per case were matched according to T- and N-stage. Mean (D mean ) and median (D 50% ) dose for the lymph node level (LNL) of RR in the cases and the corresponding LNL in the controls were analysed with conditional logistic regression. OS was estimated with the Kaplan-Meier method and evaluated by multivariate Cox regression analysis. There was a dose-dependent risk reduction for D 50% in the interval that represented elective treatment (40–50 Gy) (OR = 0.18, p < 0.05) and a trend in the same dose interval for D mean (OR = 0.19, p = 0.07). OS rates at five years were 0.39 (0.24-0.65) for cases and 0.70 (0.62–0.81) for controls (p < 0.001). The Kaplan-Meier and the Cox regression analysis for cases categorised by delivered dose showed an inverse relationship between dose and survival. The cases with RR in a LNL outside planning target volume (PTV) (D mean < 40 Gy) had an OS rate comparable to that of all patients, and those with RR in a LNL in PTV elective (D mean 40–60 Gy) or PTV tumour (D mean >60 Gy) did significantly worse (p < 0.05). The same inverse relationship was also shown for a small subset of patient

  15. Control of communicable disease; foreign--requirements for importers of nonhuman primates (NHP). Final rule.

    Science.gov (United States)

    2013-02-15

    The Centers for Disease Control and Prevention (CDC), located within the Department of Health and Human Services (HHS), is amending regulations for the importation of live nonhuman primates (NHPs) by extending existing requirements for the importation of Macaca fascicularis (cynomolgus), Chlorocebus aethiops (African green), and Macaca mulatta (rhesus) monkeys to all NHPs with the exception of the filovirus testing requirement. Filovirus testing will only be required for Old World NHPs in quarantine that have illness consistent with filovirus infection or that die for any reason other than trauma during quarantine. HHS/CDC is also finalizing a provision to reduce the frequency at which importers of cynomolgus, African green, and rhesus monkeys are required to renew their special permits (from every 180 days to every 2 years). HHS/CDC is incorporating existing guidelines into the regulations and adding new provisions to address the following: NHPs imported as part of an animal act; NHPs imported or transferred by zoological societies; the transfer of NHPs from approved laboratories; and non-live imported NHP products. Finally, HHS/CDC is also requiring that all NHPs be imported only through ports of entry where a HHS/CDC quarantine station is located.

  16. A definition of normovolaemia and consequences for cardiovascular control during orthostatic and environmental stress

    DEFF Research Database (Denmark)

    Truijen, Jasper; Bundgaard-Nielsen, Morten; van Lieshout, Johannes J

    2010-01-01

    The Frank-Starling mechanism describes the relationship between stroke volume and preload to the heart, or the volume of blood that is available to the heart--the central blood volume. Understanding the role of the central blood volume for cardiovascular control has been complicated by the fact...... stress including bed rest/microgravity, exercise and training, thermal loading, illness, and trauma/haemorrhage is likely to restrict venous return and Q. Consequently the cardiovascular responses are determined primarily by their effect on the central blood volume. Thus during environmental stress, flow...

  17. 48 CFR 919.7002 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... the Secretary of Education to meet the requirements of 20 U.S.C. 1067k. Small business concern owned and controlled by service-disabled veterans means a small business concern as defined in Public Law... BUSINESS PROGRAMS The Department of Energy Mentor-Protege Program 919.7002 Definitions. Historically Black...

  18. 22 CFR 95.1 - Definitions.

    Science.gov (United States)

    2010-04-01

    ... administration or application, of mind altering substances or other procedures calculated to disrupt profoundly... application of mind altering substances or other procedures calculated to disrupt profoundly the senses or... custody or physical control. (5) The term “acquiescence” as used in this definition requires that the...

  19. Warm-up Optimizes Postural Control but Requires Some Minutes of Recovery.

    Science.gov (United States)

    Paillard, Thierry; Kadri, Mohamed Abdelhafid; Nouar, Merbouha Boulahbel; Noé, Frederic

    2018-05-02

    Paillard, T, Kadri, MA, Nouar, MB, and Noé, F. Warm-up optimizes postural control but requires some minutes of recovery. J Strength Cond Res XX(X): 000-000, 2018-The aim was to compare monopedal postural control between the dominant leg (D-Leg) and the nondominant leg (ND-Leg) in pre- and post-warm-up conditions. Thirty healthy male sports science students were evaluated before and after a warm-up exercise (12 minutes of pedaling with an incremental effort on a cycle ergometer with a controlled workload). Monopodal postural control was assessed for the D- and ND-Legs before and immediately, 2, 5, 10, and 15 minutes after the warm-up exercise, using a force platform and calculating the displacement velocity of the center of foot pressure on the mediolateral (COPML velocity) and anteroposterior (COPAP velocity) axes. No significant difference was observed between the D-Leg and ND-Leg for both COPML and COPAP velocity in all the periods. In comparison with pre-warm-up, COPML decreased after 15-minute and 10-minute recovery periods for the D-Leg and the ND-Leg, respectively (p warm-up optimized monopedal postural control but did not make it possible to distinguish a difference between the D-Leg and the ND-Leg. Some minutes of recovery are required between the end of the whole-body warm-up exercise and the beginning of the postural test to optimize postural control. The optimal duration of recovery turns out to be about 10-15 minutes.

  20. Control Systems Security Center Comparison Study of Industrial Control System Standards against the Control Systems Protection Framework Cyber-Security Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Robert P. Evans

    2005-09-01

    Cyber security standards, guidelines, and best practices for control systems are critical requirements that have been delineated and formally recognized by industry and government entities. Cyber security standards provide a common language within the industrial control system community, both national and international, to facilitate understanding of security awareness issues but, ultimately, they are intended to strengthen cyber security for control systems. This study and the preliminary findings outlined in this report are an initial attempt by the Control Systems Security Center (CSSC) Standard Awareness Team to better understand how existing and emerging industry standards, guidelines, and best practices address cyber security for industrial control systems. The Standard Awareness Team comprised subject matter experts in control systems and cyber security technologies and standards from several Department of Energy (DOE) National Laboratories, including Argonne National Laboratory, Idaho National Laboratory, Pacific Northwest National Laboratory, and Sandia National Laboratories. This study was conducted in two parts: a standard identification effort and a comparison analysis effort. During the standard identification effort, the Standard Awareness Team conducted a comprehensive open-source survey of existing control systems security standards, regulations, and guidelines in several of the critical infrastructure (CI) sectors, including the telecommunication, water, chemical, energy (electric power, petroleum and oil, natural gas), and transportation--rail sectors and sub-sectors. During the comparison analysis effort, the team compared the requirements contained in selected, identified, industry standards with the cyber security requirements in ''Cyber Security Protection Framework'', Version 0.9 (hereafter referred to as the ''Framework''). For each of the seven sector/sub-sectors listed above, one standard was

  1. Mining unstructured data to support requirements elicitation by using controlled vocabularies: A systematic mapping study

    Directory of Open Access Journals (Sweden)

    José L. Barros-Justo

    2015-01-01

    Full Text Available This paper presents a work-in- progress that deals with the asse ssment of the use of controlled vocabularies during the process es of requirements engineering, as a m eans to mine data from differen t sources (interviews, contracts, schemas and diagrams. By doi ng this the requirements description, analy sis and comprehension is facilit ated for both developers and end users. As a research methodolo gy, we decided to use a systematic mapping study covering the last fou rteen years (2000 - 2014. As far as we know, such studies have not yet been done; however, the cost incurred from errors in the requir ements elicitation phase is one of the problems that is most co mmonly reported by the practitioners. Our study includes data on the p rocesses of building the controlled vocabulary and assesses the productivity and quality. We are also interes ted in tools and techniques to classify and retrieve information. Our first findings suggest t hat this is an under-research area.

  2. Inclusion of service robots in the daily lives of frail older users: A step-by-step definition procedure on users' requirements.

    Science.gov (United States)

    García-Soler, Álvaro; Facal, David; Díaz-Orueta, Unai; Pigini, Lucia; Blasi, Lorenzo; Qiu, Renxi

    2018-01-01

    The implications for the inclusion of robots in the daily lives of frail older adults, especially in relation to these population needs, have not been extensively studied. The "Multi-Role Shadow Robotic System for Independent Living" (SRS) project has developed a remotely-controlled, semi-autonomous robotic system to be used in domestic environments. The objective of this paper is to document the iterative procedure used to identify, select and prioritize user requirements. Seventy-four requirements were identified by means of focus groups, individual interviews and scenario-based interviews. The list of user requirements, ordered according to impact, number and transnational criteria, revealed a high number of requirements related to basic and instrumental activities of daily living, cognitive and social support and monitorization, and also involving privacy, safety and adaptation issues. Analysing and understanding older users' perceptions and needs when interacting with technological devices adds value to assistive technology and ensures that the systems address currently unmet needs. Copyright © 2017 Elsevier B.V. All rights reserved.

  3. Impulse control disorders in Parkinson's disease: definition, epidemiology, risk factors, neurobiology and management.

    Science.gov (United States)

    Ceravolo, Roberto; Frosini, Daniela; Rossi, Carlo; Bonuccelli, Ubaldo

    2009-12-01

    There is increasing awareness that impulse control disorders (ICDs), including pathological gambling, hyper-sexuality, compulsive eating and buying, can occur as a complication of Parkinson's disease (PD). In addition, other impulsive or compulsive disorders have been reported to occur, including dopamine dysregulation syndrome (DDS) and punding. Case reports and prospective studies have reported an association between ICDs and the use of dopamine receptor agonists at higher doses, and DDS has been associated with L-dopa at higher doses or short-acting dopamine receptor agonists. Risk factors for ICDs include male sex, younger age or younger age at PD onset, a pre-PD history of ICD symptoms, history of substance use or bipolar disorder, and a personality profile characterized by impulsiveness. The management of clinically significant ICD symptoms should consist of modifications to dopamine replacement therapy, particularly dopamine receptor agonists, which is usually associated with an improvement of ICDs. There is no empirical evidence supporting the use of psychiatric drugs for ICDs in PD. Functional neuroimaging studies such as functional MRI and PET can investigate in vivo the neurobiological basis of these pathological behaviours. Copyright 2009 Elsevier Ltd. All rights reserved.

  4. Computer-aided design of control systems to meet many requirements

    Science.gov (United States)

    Schy, A. A.; Adams, W. M., Jr.; Johnson, K. G.

    1974-01-01

    A method is described for using nonlinear programing in the computer-aided design of airplane control systems. It is assumed that the quality of such systems depends on many criteria. These criteria are included in the constraints vector (instead of attempting to combine them into a single scalar criterion, as is usually done), and the design proceeds through a sequence of nonlinear programing solutions in which the designer varies the specification of sets of requirements levels. The method is applied to design of a lateral stability augmentation system (SAS) for a fighter airplane, in which the requirements vector is chosen from the official handling qualities specifications. Results are shown for several simple SAS configurations designed to obtain desirable handling qualities over all design flight conditions with minimum feedback gains. The choice of the final design for each case is not unique but depends on the designer's decision as to which achievable set of requirements levels represents the best for that system. Results indicate that it may be possible to design constant parameter SAS which can satisfy the most stringent handling qualities requirements for fighter airplanes in all flight conditions. The role of the designer as a decision maker, interacting with the computer program, is discussed. Advantages of this type of designer-computer interaction are emphasized. Desirable extensions of the method are indicated.

  5. Distributed Control and Management of Renewable Electric Energy Resources for Future Grid Requirements

    DEFF Research Database (Denmark)

    Mokhtari, Ghassem; Anvari-Moghaddam, Amjad; Nourbakhsh, Ghavameddin

    2016-01-01

    strategy is a promising approach to manage and utilise the resources in future distribution networks to effectively deal with grid electric quality issues and requirements. Jointly, utility and customers the owners of the resources in the network are considered as part of a practical coordination strategy......It is anticipated that both medium- and low-voltage distribution networks will include high level of distributed renewable energy resources, in the future. The high penetration of these resources inevitably can introduce various power quality issues, including; overvoltage and overloading....... This book chapter provides the current research state of the art concepts and techniques in dealing with these potential issues. The methods provided in this chapter are based on distributed control approach, tailored and suitable particularly for the future distribution composition. The distributed control...

  6. Diagnostics and required R and D for control of DEMO grade plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Park, Hyeon K., E-mail: hyeonpark@unist.ac.kr [Fusion Plasma Stability and Confinement Research Center, UNIST, 50 Unist-gil, Ulju-gun, Ulsan (Korea, Republic of)

    2014-08-21

    Even if the diagnostics of ITER performs as expected, installation and operation of the diagnostic systems in Demo device will be much harsher than those of the present ITER device. In order to operate the Demo grade plasmas, which may have a higher beta limit, safely with very limited number of simple diagnostic system, it requires a well defined predictable plasma modelling in conjunction with the reliable control system for burn control and potential harmful instabilities. Development of such modelling in ITER is too risky and the logical choice would be utilization of the present day steady state capable devices such as KSTAR and EAST. In order to fulfill this mission, sophisticated diagnostic systems such as 2D/3D imaging systems can validate the physics in the theoretical modeling and challenge the predictable capability.

  7. Optimizing clinical trial supply requirements: simulation of computer-controlled supply chain management.

    Science.gov (United States)

    Peterson, Magnus; Byrom, Bill; Dowlman, Nikki; McEntegart, Damian

    2004-01-01

    Computer-controlled systems are commonly used in clinical trials to control dispensing and manage site inventories of trial supplies. Typically such systems are used with an interactive telephone or web system that provide an interface with the study site. Realizing the maximum savings in medication associated with this approach has, in the past, been problematic as it has been difficult to fully estimate medication requirements due to the complexities of these algorithms and the inherent variation in the clinical trial recruitment process. We describe the traditional and automated methods of supplying sites. We detail a simulation approach that models the automated system. We design a number of simulation experiments using this model to investigate the supply strategy properties that influence medication overage and other strategy performance metrics. The computer-controlled medication system gave superior performance to the traditional method. In one example, a 75% overage of wasted medication in the traditional system was associated with higher supply failure than an automated system strategy with an overage of 47%. In a further example, we demonstrate that the impact of using a country stratified as opposed to site stratified scheme affects the number of deliveries and probability of supply failures more than the amount of drug wasted with respective increases of 20, 2300 and 4%. Medication savings with automated systems are particularly significant in repeat dispensing designs. We show that the number of packs required can fall by as much as 50% if one uses a predictive medication algorithm. We conclude that a computer-controlled supply chain enables medication savings to be realized and that it is possible to quantify the distribution of these savings using a simulation model. The simulation model can be used to optimize the prestudy medication supply strategy and for midstudy monitoring using real-time data contained in the study database.

  8. 21 CFR 111.60 - What are the design requirements for the production and process control system?

    Science.gov (United States)

    2010-04-01

    ... to Establish a Production and Process Control System § 111.60 What are the design requirements for... 21 Food and Drugs 2 2010-04-01 2010-04-01 false What are the design requirements for the production and process control system? 111.60 Section 111.60 Food and Drugs FOOD AND DRUG ADMINISTRATION...

  9. Gap analysis of Mycoplasma bovis disease, diagnosis and control: An aid to identify future development requirements.

    Science.gov (United States)

    Calcutt, M J; Lysnyansky, I; Sachse, K; Fox, L K; Nicholas, R A J; Ayling, R D

    2018-05-01

    There is a worldwide problem of disease caused by Mycoplasma (M.) bovis in cattle; it has a significant detrimental economic and animal welfare impact on cattle rearing. Infection can manifest as a plethora of clinical signs including mastitis, pneumonia, arthritis, keratoconjunctivitis, otitis media and genital disorders that may result in infertility and abortion. Current diagnosis and control information are reviewed and analysed to identify gaps in knowledge of the causative organism in respect of the disease pathology, diagnosis and control methods. The main considerations are as follows: no vaccines are commercially available; antimicrobial resistance is increasing; diagnostic and antimicrobial sensitivity testing needs to be improved; and a pen-side test would facilitate more rapid diagnosis and implementation of treatment with antimicrobials. More data on host susceptibility, stress factors, immune response and infectious dose levels are required. The impact of asymptomatic carriers, M. bovis survival in the environment and the role of wildlife in transmitting the disease also needs investigation. To facilitate development of vaccines, further analysis of more M. bovis genomes, its pathogenic mechanisms, including variable surface proteins, is required, along with reproducible disease models. © 2018 Blackwell Verlag GmbH.

  10. Diagnosis of measles by clinical case definition in dengue-endemic areas: implications for measles surveillance and control.

    OpenAIRE

    Dietz, V. J.; Nieburg, P.; Gubler, D. J.; Gomez, I.

    1992-01-01

    In many countries, measles surveillance relies heavily on the use of a standard clinical case definition; however, the clinical signs and symptoms of measles are similar to those of dengue. For example, during 1985, in Puerto Rico, 22 (23%) of 94 cases of illnesses with rashes that met the measles clinical case definition were serologically confirmed as measles, but 32 (34%) others were serologically confirmed as dengue. Retrospective analysis at the San Juan Laboratories of the Centers for D...

  11. The Johnson Space Center Management Information Systems (JSCMIS). 1: Requirements Definition and Design Specifications for Versions 2.1 and 2.1.1. 2: Documented Test Scenario Environments. 3: Security Design and Specifications

    Science.gov (United States)

    1986-01-01

    The Johnson Space Center Management Information System (JSCMIS) is an interface to computer data bases at NASA Johnson which allows an authorized user to browse and retrieve information from a variety of sources with minimum effort. This issue gives requirements definition and design specifications for versions 2.1 and 2.1.1, along with documented test scenario environments, and security object design and specifications.

  12. Simulation Modeling Requirements for Loss-of-Control Accident Prevention of Turboprop Transport Aircraft

    Science.gov (United States)

    Crider, Dennis; Foster, John V.

    2012-01-01

    . This paper addresses simulation modeling requirements that are unique to turboprop transport aircraft and highlights the growing need for aerodynamic models suitable for stall training for these configurations. A review of prominent accidents that involved aerodynamic stall is used to illustrate various modeling features unique to turboprop configurations and the impact of stall behavior on susceptibility to loss of control that has led to new training requirements. This is followed by an overview of stability and control behavior of straight-wing turboprops, the related aerodynamic characteristics, and a summary of recent experimental studies on icing effects. In addition, differences in flight dynamics behavior between swept-wing jets and straight-wing turboprop configurations are discussed to compare and contrast modeling requirements. Specific recommendations for aerodynamic models along with further research needs and data measurements are also provided. 1

  13. Integrated Application of Active Controls (IAAC) technology to an advanced subsonic transport project: Current and advanced act control system definition study, volume 1

    Science.gov (United States)

    Hanks, G. W.; Shomber, H. A.; Dethman, H. A.; Gratzer, L. B.; Maeshiro, A.; Gangsaas, D.; Blight, J. D.; Buchan, S. M.; Crumb, C. B.; Dorwart, R. J.

    1981-01-01

    An active controls technology (ACT) system architecture was selected based on current technology system elements and optimal control theory was evaluated for use in analyzing and synthesizing ACT multiple control laws. The system selected employs three redundant computers to implement all of the ACT functions, four redundant smaller computers to implement the crucial pitch-augmented stability function, and a separate maintenance and display computer. The reliability objective of probability of crucial function failure of less than 1 x 10 to the -9th power per flight of 1 hr can be met with current technology system components, if the software is assumed fault free and coverage approaching 1.0 can be provided. The optimal control theory approach to ACT control law synthesis yielded comparable control law performance much more systematically and directly than the classical s-domain approach. The ACT control law performance, although somewhat degraded by the inclusion of representative nonlinearities, remained quite effective. Certain high-frequency gust-load alleviation functions may require increased surface rate capability.

  14. Major upgrade of the articulated inspection arm control system to fulfill daily operation requirements

    Energy Technology Data Exchange (ETDEWEB)

    Pastor, P., E-mail: patrick.pastor@cea.fr [CEA, IRFM, Institut de Recherche sur la Fusion par confinement Magnétique (France); Villedieu, E.; Allegretti, L.; Vincent, B.; Barbuti, A.; Bruno, V.; Coquillat, P.; Dechelle, C.; Gargiulo, L.; Le, R.; Malard, P.; Martinez, A.; Nouailletas, R. [CEA, IRFM, Institut de Recherche sur la Fusion par confinement Magnétique (France); Yuntao, Song; Yong, Cheng; Chen, Liu; Hansheng, Feng; Shanshuang, Shi [ASIPP, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui (China)

    2015-10-15

    Highlights: • We propose an overview of the work which has been done to upgrade the control system of the AIA robot (articulated inspection arm) to fulfill daily operation requirements for tokamak inspection. • The control system is based on the use of new position sensors, new electronics design and new supervisor software. • Final tests are ongoing in the EAST scale 1 tokamak mock-up. Routine operation of the robot at EAST will start in the beginning of 2015. - Abstract: An articulated inspection arm (AIA) has been developed by CEA for visual inspection between pulses inside the Tore Supra tokamak vacuum vessel without breaking temperature and vacuum conditions. The eight meters length robot is composed of a shuttle and six articulated segments with a video camera at its end. A demonstration prototype has been achieved in 2008 at Tore Supra (Gargiulo, 2007; Houry, 2008; Perrot, 2003). A project to upgrade the AIA into a fully operational robot has been undertaken by IRFM and ASIPP in an Associated Laboratory. It will be in operation first in the EAST machine and afterwards in Tore Supra in its WEST (W/Tungsten Environment in Steady-state Tokamak) configuration where it is of paramount importance to survey possible degradation of W component surface. The control system of the robot has been extensively upgraded. The effort has been focused on three areas: (1) improvement of the arm position accuracy, (2) increase of the operational robustness, (3) use of a powerful graphical user interface including simulation of trajectories and robot deployment capabilities in a 3D viewer environment. The aim of this paper is to detail the architecture of the AIA control system.

  15. 21 CFR 1304.50 - Disclosure requirements for Web sites of nonpharmacy practitioners that dispense controlled...

    Science.gov (United States)

    2010-04-01

    ... being exempt from the definition of an online pharmacy by virtue of section 102(52)(B)(ii) of the Act... and clear manner on its homepage, or on a page directly linked thereto in which the hyperlink is also...

  16. 21 CFR 111.55 - What are the requirements to implement a production and process control system?

    Science.gov (United States)

    2010-04-01

    ... production and process control system? 111.55 Section 111.55 Food and Drugs FOOD AND DRUG ADMINISTRATION... to Establish a Production and Process Control System § 111.55 What are the requirements to implement a production and process control system? You must implement a system of production and process...

  17. High-definition infrared thermography of ice nucleation and propagation in wheat under natural frost conditions and controlled freezing.

    Science.gov (United States)

    Livingston, David P; Tuong, Tan D; Murphy, J Paul; Gusta, Lawrence V; Willick, Ian; Wisniewski, Micheal E

    2018-04-01

    An extremely high resolution infrared camera demonstrated various freezing events in wheat under natural conditions. Many of those events shed light on years of misunderstanding regarding freezing in small grains. Infrared thermography has enhanced our knowledge of ice nucleation and propagation in plants through visualization of the freezing process. The majority of infrared analyses have been conducted under controlled conditions and often on individual organs instead of whole plants. In the present study, high-definition (1280 × 720 pixel resolution) infrared thermography was used under natural conditions to visualize the freezing process of wheat plants during freezing events in 2016 and 2017. Plants within plots were found to freeze one at a time throughout the night and in an apparently random manner. Leaves on each plant also froze one at a time in an age-dependent pattern with oldest leaves freezing first. Contrary to a common assumption that freezing begins in the upper parts of leaves; freezing began at the base of the plant and spread upwards. The high resolution camera used was able to verify that a two stage sequence of freezing began within vascular bundles. Neither of the two stages was lethal to leaves, but a third stage was demonstrated at colder temperatures that was lethal and was likely a result of dehydration stress; this stage of freezing was not detectable by infrared. These results underscore the complexity of the freezing process in small grains and indicate that comprehensive observational studies are essential to identifying and selecting freezing tolerance traits in grain crops.

  18. Radiation-resistant requirements analysis of device and control component for advanced spent fuel management process

    Energy Technology Data Exchange (ETDEWEB)

    Song, Tai Gil; Park, G. Y.; Kim, S. Y.; Lee, J. Y.; Kim, S. H.; Yoon, J. S. [Korea Atomic Energy Research Institute, Taejeon (Korea)

    2002-02-01

    It is known that high levels of radiation can cause significant damage by altering the properties of materials. A practical understanding of the effects of radiation - how radiation affects various types of materials and components - is required to design equipment to operate reliably in a gamma radiation environment. When designing equipment to operate in a high gamma radiation environment, such as will be present in a nuclear spent fuel handling facility, several important steps should be followed. In order to active test of the advanced spent fuel management process, the radiation-resistant analysis of the device and control component for active test which is concerned about the radiation environment is conducted. Also the system design process is analysis and reviewed. In the foreign literature, 'threshold' values are generally reported. the threshold values are normally the dose required to begin degradation in a particular material property. The radiation effect analysis for the device of vol-oxidation and metalization, which are main device for the advanced spent fuel management process, is performed by the SCALE 4.4 code. 5 refs., 4 figs., 13 tabs. (Author)

  19. New Requirements of the Voltage/VAR Function for Smart Inverter in Distributed Generation Control

    Directory of Open Access Journals (Sweden)

    Yun-Su Kim

    2016-11-01

    Full Text Available International Electronical Committee (IEC 61850-90-7 is a part of the IEC 61850 series which specifies the advanced functions and object models for power converter based Distributed Energy Resources (DERs. One of its functions, the Voltage/VAR (V/V control function, is used to enhance the stability and the reliability of the voltage in the distribution system. The conventional V/V function acts mainly for flattening the voltage profile as for a basic grid support function. Currently, other objectives such as the minimization of line loss and the operational costs reduction are coming into the spotlight. In order to attain these objectives, the V/V function and hence the DER units shall actively respond to the change of distribution system conditions. In this paper, the modification of V/V function and new requirements are proposed. To derive new requirements of V/V function, loss minimization is applied to a particle swarm optimization (PSO algorithm where the condition of voltage constraint is considered not to deteriorate the voltage stability of the distribution system.

  20. Quality control of brachytherapy equipment in the Netherlands and Belgium: current practice and minimum requirements

    International Nuclear Information System (INIS)

    Elfrink, Robert J.M.; Kolkman-Deurloo, Inger-Karine K.; Kleffens, Herman J. van; Rijnders, Alex; Schaeken, Bob; Aalbers, Tony H.L.; Dries, Wim J.F.; Venselaar, Jack L.M.

    2002-01-01

    Background and purpose: Brachytherapy is applied in 39 radiotherapy institutions in The Netherlands and Belgium. Each institution has its own quality control (QC) programme to ensure safe and accurate dose delivery to the patient. The main goal of this work is to gain insight into the current practice of QC of brachytherapy in The Netherlands and Belgium and to reduce possible variations in test frequencies and tolerances by formulating a set of minimum QC-requirements. Materials and methods: An extensive questionnaire about QC of brachytherapy was distributed to and completed by the 39 radiotherapy institutions. A separate smaller questionnaire was sent to nine institutions performing intracoronary brachytherapy. The questions were related to safety systems, physical irradiation parameters and total time spent on QC. The results of the questionnaires were compared with recommendations given in international brachytherapy QC reports. Results: The answers to the questionnaires showed large variations in test frequencies and test methods. Furthermore, large variations in time spent on QC exist, which is mainly due to differences in QC-philosophy and differences in the available resources. Conclusions: Based on the results of the questionnaires and the comparison with the international recommendations, a set of minimum requirements for QC of brachytherapy has been formulated. These guidelines will be implemented in the radiotherapy institutions in The Netherlands and Belgium

  1. Modelling of radon control and air cleaning requirements in underground uranium mines

    International Nuclear Information System (INIS)

    El Fawal, M.; Gadalla, A.

    2014-01-01

    As a part of a comprehensive study concerned with control workplace short-lived radon daughter concentration in underground uranium mines to safe levels, a computer program has been developed and verified, to calculate ventilation parameters e.g. local pressures, flow rates and radon daughter concentration levels. The computer program is composed of two parts, one part for mine ventilation and the other part for radon daughter levels calculations. This program has been validated in an actual case study to calculate radon concentration levels, pressure and flow rates required to maintain acceptable levels of radon concentrations in each point of the mine. The required fan static pressure and the approximate energy consumption were also estimated. The results of the calculations have been evaluated and compared with similar investigation. It was found that the calculated values are in good agreement with the corresponding values obtained using ''REDES'' standard ventilation modelling software. The developed computer model can be used as an available tool to help in the evaluation of ventilation systems proposed by mining authority, to assist the uranium mining industry in maintaining the health and safety of the workers underground while efficiently achieving economic production targets. It could be used also for regulatory inspection and radiation protection assessments of workers in the underground mining. Also with using this model, one can effectively design, assess and manage underground mine ventilation systems. Values of radon decay products concentration in units of working level, pressures drop and flow rates required to reach the acceptable radon concentration relative to the recommended levels, at different extraction points in the mine and fan static pressure could be estimated which are not available using other software. (author)

  2. Space shuttle orbiter guidance, naviagation and control software functional requirements: Horizontal flight operations

    Science.gov (United States)

    1972-01-01

    The shuttle GN&C software functions for horizontal flight operations are defined. Software functional requirements are grouped into two categories: first horizontal flight requirements and full mission horizontal flight requirements. The document privides the intial step in the shuttle GN&C software design process. It also serves as a management tool to identify analyses which are required to define requirements.

  3. Testing to fulfill HACCP (Hazard Analysis Critical Control Points) requirements: principles and examples.

    Science.gov (United States)

    Gardner, I A

    1997-12-01

    On-farm HACCP (hazard analysis critical control points) monitoring requires cost-effective, yet accurate and reproducible tests that can determine the status of cows, milk, and the dairy environment. Tests need to be field-validated, and their limitations need to be established so that appropriate screening strategies can be initiated and test results can be rationally interpreted. For infections and residues of low prevalence, tests or testing strategies that are highly specific help to minimize false-positive results and excessive costs to the dairy industry. The determination of the numbers of samples to be tested in HACCP monitoring programs depends on the specific purpose of the test and the likely prevalence of the agent or residue at the critical control point. The absence of positive samples from a herd test should not be interpreted as freedom from a particular agent or residue unless the entire herd has been tested with a test that is 100% sensitive. The current lack of field-validated tests for most of the chemical and infectious agents of concern makes it difficult to ensure that the stated goals of HACCP programs are consistently achieved.

  4. Export Control Requirements for Tritium Processing Design and R&D

    Energy Technology Data Exchange (ETDEWEB)

    Hollis, William Kirk [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Maynard, Sarah-Jane Wadsworth [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-04-05

    This document will address requirements of export control associated with tritium plant design and processes. Los Alamos National Laboratory has been working in the area of tritium plant system design and research and development (R&D) since the early 1970’s at the Tritium Systems Test Assembly (TSTA). This work has continued to the current date with projects associated with the ITER project and other Office of Science Fusion Energy Science (OS-FES) funded programs. ITER is currently the highest funding area for the DOE OS-FES. Although export control issues have been integrated into these projects in the past a general guidance document has not been available for reference in this area. To address concerns with currently funded tritium plant programs and assist future projects for FES, this document will identify the key reference documents and specific sections within related to tritium research. Guidance as to the application of these sections will be discussed with specific detail to publications and work with foreign nationals.

  5. Export Control Requirements for Tritium Processing Design and R&D

    Energy Technology Data Exchange (ETDEWEB)

    Hollis, William Kirk [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Maynard, Sarah-Jane Wadsworth [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-10-30

    This document will address requirements of export control associated with tritium plant design and processes. Los Alamos National Laboratory has been working in the area of tritium plant system design and research and development (R&D) since the early 1970’s at the Tritium Systems Test Assembly (TSTA). This work has continued to the current date with projects associated with the ITER project and other Office of Science Fusion Energy Science (OS-FES) funded programs. ITER is currently the highest funding area for the DOE OS-FES. Although export control issues have been integrated into these projects in the past a general guidance document has not been available for reference in this area. To address concerns with currently funded tritium plant programs and assist future projects for FES, this document will identify the key reference documents and specific sections within related to tritium research. Guidance as to the application of these sections will be discussed with specific detail to publications and work with foreign nationals.

  6. Diagnostics of trophoblast disease and the control of therapeutic efficiency based on definition of chorionic gonadotrapin and trophoblastic beta1-glycoprotein

    International Nuclear Information System (INIS)

    Yugrinova, L.G.; Olefirenko, G.A.; Dotsenko, Yu.S.

    1982-01-01

    A comparative estimation of markers of trophoblast disease, chorionic gonadotropin (CG) and trophoblastic beta 1 -glycoprotein defined by different methods is given. It is found that diagnostics and control of therapeutic efficiency for patients having trophoblast disease based on CG definition are possible. In 86% of cases the clinical diagnosis was confirmed by the immunoradioautography, and in 33% - by the immunodiffusion method. The dependence of marker detection frequency on the therapeutic efficiency is found

  7. Energy Monitoring and Control Systems Operator Training - Recommended Qualifications, Staffing, Job Description, and Training Requirements for EMCS Operators.

    Science.gov (United States)

    1982-06-01

    start/stop chiller optimization , and demand limiting were added. The system monitors a 7,000 ton chiller plant and controls 74 air handlers. The EMCS does...Modify analog limits. g. Adjust setpoints of selected controllers. h. Select manual or automatic control modes. i. Enable and disable individual points...or event schedules and controller setpoints ; make nonscheduled starts and stops of equipment or disable field panels when required for routine

  8. An analysis of Technical Security Control Requirements For Digital I and C Systems in Nuclear Power Plants

    International Nuclear Information System (INIS)

    Song, Jaegu; Lee, Jungwoon; Park, Geeyong; Kwon, Keechoon; Lee, Dongyoung; Lee, Cheolkwon

    2013-01-01

    Instrumentation and control systems in nuclear power plants have been digitalized for the purpose of maintenance and precise operation. This digitalization, however, brings out issues related to cyber security. In the most recent past, international standard organizations, regulatory institutes, and research institutes have performed a number of studies addressing these systems cyber security. In order to provide information helpful to the system designers in their application of cyber security for the systems, this paper presents methods and considerations to define attack vectors in a target system, to review and select the requirements in the Regulatory Guide 5.71, and to integrate the results to identify applicable technical security control requirements. In this study, attack vectors are analyzed through the vulnerability analyses and penetration tests with a simplified safety system, and the elements of critical digital assets acting as attack vectors are identified. Among the security control requirements listed in Appendices B and C to Regulatory Guide 5.71, those that should be implemented into the systems are selected and classified in groups of technical security control requirements using the results of the attack vector analysis. For the attack vector elements of critical digital assets, all the technical security control requirements are evaluated to determine whether they are applicable and effective, and considerations in this evaluation are also discussed. The technical security control requirements in three important categories of access control, monitoring and logging, and encryption are derived and grouped according to the elements of attack vectors as results for the sample safety system

  9. An analysis of Technical Security Control Requirements For Digital I and C Systems in Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Song, Jaegu; Lee, Jungwoon; Park, Geeyong; Kwon, Keechoon; Lee, Dongyoung; Lee, Cheolkwon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2013-10-15

    Instrumentation and control systems in nuclear power plants have been digitalized for the purpose of maintenance and precise operation. This digitalization, however, brings out issues related to cyber security. In the most recent past, international standard organizations, regulatory institutes, and research institutes have performed a number of studies addressing these systems cyber security. In order to provide information helpful to the system designers in their application of cyber security for the systems, this paper presents methods and considerations to define attack vectors in a target system, to review and select the requirements in the Regulatory Guide 5.71, and to integrate the results to identify applicable technical security control requirements. In this study, attack vectors are analyzed through the vulnerability analyses and penetration tests with a simplified safety system, and the elements of critical digital assets acting as attack vectors are identified. Among the security control requirements listed in Appendices B and C to Regulatory Guide 5.71, those that should be implemented into the systems are selected and classified in groups of technical security control requirements using the results of the attack vector analysis. For the attack vector elements of critical digital assets, all the technical security control requirements are evaluated to determine whether they are applicable and effective, and considerations in this evaluation are also discussed. The technical security control requirements in three important categories of access control, monitoring and logging, and encryption are derived and grouped according to the elements of attack vectors as results for the sample safety system.

  10. LDR structural experiment definition

    Science.gov (United States)

    Russell, Richard A.; Gates, Richard M.

    1988-01-01

    A study was performed to develop the definition of a structural flight experiment for a large precision segmented reflector that would utilize the Space Station. The objective of the study was to use the Large Deployable Reflector (LDR) baseline configuration for focusing on experiment definition activity which would identify the Space Station accommodation requirements and interface constraints. Results of the study defined three Space Station based experiments to demonstrate the technologies needed for an LDR type structure. The basic experiment configurations are the same as the JPL baseline except that the primary mirror truss is 10 meters in diameter instead of 20. The primary objectives of the first experiment are to construct the primary mirror support truss and to determine its structural and thermal characteristics. Addition of the optical bench, thermal shield and primary mirror segments and alignment of the optical components occur on the second experiment. The structure will then be moved to the payload pointing system for pointing, optical control and scientific optical measurement for the third experiment.

  11. Step 1: Human System Integration (HSI) FY05 Pilot-Technology Interface Requirements for Command, Control, and Communications (C3)

    Science.gov (United States)

    2005-01-01

    The document provides the Human System Integration(HSI) high-level functional C3 HSI requirements for the interface to the pilot. Description includes (1) the information required by the pilot to have knowledge C3 system status, and (2) the control capability needed by the pilot to obtain C3 information. Fundamentally, these requirements provide the candidate C3 technology concepts with the necessary human-related elements to make them compatible with human capabilities and limitations. The results of the analysis describe how C3 operations and functions should interface with the pilot to provide the necessary C3 functionality to the UA-pilot system. Requirements and guidelines for C3 are partitioned into three categories: (1) Pilot-Air Traffic Control (ATC) Voice Communications (2) Pilot-ATC Data Communications, and (3) command and control of the unmanned aircraft (UA). Each requirement is stated and is supported with a rationale and associated reference(s).

  12. 21 CFR 111.525 - What requirements apply to a returned dietary supplement that quality control personnel approve...

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false What requirements apply to a returned dietary supplement that quality control personnel approve for reprocessing? 111.525 Section 111.525 Food and Drugs... FOR DIETARY SUPPLEMENTS Returned Dietary Supplements § 111.525 What requirements apply to a returned...

  13. 12 CFR 208.71 - What are the requirements to invest in or control a financial subsidiary?

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 2 2010-01-01 2010-01-01 false What are the requirements to invest in or control a financial subsidiary? 208.71 Section 208.71 Banks and Banking FEDERAL RESERVE SYSTEM BOARD OF... SYSTEM (REGULATION H) Financial Subsidiaries of State Member Banks § 208.71 What are the requirements to...

  14. Flight path control strategies and preliminary deltaV requirements for the 2007 Mars Phoenix (PHX) mission

    Science.gov (United States)

    Raofi, Behzad

    2005-01-01

    This paper describes the methods used to estimate the statistical deltaV requirements for the propulsive maneuvers that will deliver the spacecraft to its target landing site while satisfying planetary protection requirements. the paper presents flight path control analysis results for three different trajectories, open, middle, and close of launch period for the mission.

  15. System requirements for one-time-use ENRAF control panel software

    International Nuclear Information System (INIS)

    HUBER, J.H.

    1999-01-01

    An Enraf Densitometer is installed on tank 241-AY-102. The Densitometer will frequently be tasked to obtain and log density profiles. The activity can be effected a number of ways. Enraf Incorporated provides a software package called ''Logger18'' to its customers for the purpose of in-shop testing of their gauges. Logger18 is capable of accepting an input file which can direct the gauge to obtain a density profile for a given tank level and bottom limit. Logger18 is a complex, DOS based program which will require trained technicians and/or tank farm entries to obtain the data. ALARA considerations have prompted the development of a more user-friendly, computer-based interface to the Enraf densitometers. This document records the plan by which this new Enraf data acquisition software will be developed, reviewed, verified, and released. This plan applies to the development and implementation of a one-time-use software program, which will be called ''Enraf Control Panel.'' The software will be primarily used for remote operation of Enraf Densitometers for the purpose of obtaining and logging tank product density profiles

  16. Glutaredoxin-2 is required to control oxidative phosphorylation in cardiac muscle by mediating deglutathionylation reactions.

    Science.gov (United States)

    Mailloux, Ryan J; Xuan, Jian Ying; McBride, Skye; Maharsy, Wael; Thorn, Stephanie; Holterman, Chet E; Kennedy, Christopher R J; Rippstein, Peter; deKemp, Robert; da Silva, Jean; Nemer, Mona; Lou, Marjorie; Harper, Mary-Ellen

    2014-05-23

    Glutaredoxin-2 (Grx2) modulates the activity of several mitochondrial proteins in cardiac tissue by catalyzing deglutathionylation reactions. However, it remains uncertain whether Grx2 is required to control mitochondrial ATP output in heart. Here, we report that Grx2 plays a vital role modulating mitochondrial energetics and heart physiology by mediating the deglutathionylation of mitochondrial proteins. Deletion of Grx2 (Grx2(-/-)) decreased ATP production by complex I-linked substrates to half that in wild type (WT) mitochondria. Decreased respiration was associated with increased complex I glutathionylation diminishing its activity. Tissue glucose uptake was concomitantly increased. Mitochondrial ATP output and complex I activity could be recovered by restoring the redox environment to that favoring the deglutathionylated states of proteins. Grx2(-/-) hearts also developed left ventricular hypertrophy and fibrosis, and mice became hypertensive. Mitochondrial energetics from Grx2 heterozygotes (Grx2(+/-)) were also dysfunctional, and hearts were hypertrophic. Intriguingly, Grx2(+/-) mice were far less hypertensive than Grx2(-/-) mice. Thus, Grx2 plays a vital role in modulating mitochondrial metabolism in cardiac muscle, and Grx2 deficiency leads to pathology. As mitochondrial ATP production was restored by the addition of reductants, these findings may be relevant to novel redox-related therapies in cardiac disease. © 2014 by The American Society for Biochemistry and Molecular Biology, Inc.

  17. Cdk2 is required for p53-independent G2/M checkpoint control.

    Directory of Open Access Journals (Sweden)

    Jon H Chung

    2010-02-01

    Full Text Available The activation of phase-specific cyclin-dependent kinases (Cdks is associated with ordered cell cycle transitions. Among the mammalian Cdks, only Cdk1 is essential for somatic cell proliferation. Cdk1 can apparently substitute for Cdk2, Cdk4, and Cdk6, which are individually dispensable in mice. It is unclear if all functions of non-essential Cdks are fully redundant with Cdk1. Using a genetic approach, we show that Cdk2, the S-phase Cdk, uniquely controls the G(2/M checkpoint that prevents cells with damaged DNA from initiating mitosis. CDK2-nullizygous human cells exposed to ionizing radiation failed to exclude Cdk1 from the nucleus and exhibited a marked defect in G(2/M arrest that was unmasked by the disruption of P53. The DNA replication licensing protein Cdc6, which is normally stabilized by Cdk2, was physically associated with the checkpoint regulator ATR and was required for efficient ATR-Chk1-Cdc25A signaling. These findings demonstrate that Cdk2 maintains a balance of S-phase regulatory proteins and thereby coordinates subsequent p53-independent G(2/M checkpoint activation.

  18. Life sciences payload definition and integration study. Volume 4: Appendix, costs, and data management requirements of the dedicated 30-day laboratory. [carry-on laboratory for Spacelab

    Science.gov (United States)

    1974-01-01

    The results of the updated 30-day life sciences dedicated laboratory scheduling and costing activities are documented, and the 'low cost' methodology used to establish individual equipment item costs is explained in terms of its allowances for equipment that is commerical off-the-shelf, modified commercial, and laboratory prototype; a method which significantly lowers program costs. The costs generated include estimates for non-recurring development, recurring production, and recurring operations costs. A cost for a biomedical emphasis laboratory and a Delta cost to provide a bioscience and technology laboratory were also generated. All cost reported are commensurate with the design and schedule definitions available.

  19. Definition, technology readiness, and development cost of the orbit transfer vehicle engine integrated control and health monitoring system elements

    Science.gov (United States)

    Cannon, I.; Balcer, S.; Cochran, M.; Klop, J.; Peterson, S.

    1991-01-01

    An Integrated Control and Health Monitoring (ICHM) system was conceived for use on a 20 Klb thrust baseline Orbit Transfer Vehicle (OTV) engine. Considered for space used, the ICHM was defined for reusability requirements for an OTV engine service free life of 20 missions, with 100 starts and a total engine operational time of 4 hours. Functions were derived by flowing down requirements from NASA guidelines, previous OTV engine or ICHM documents, and related contracts. The elements of an ICHM were identified and listed, and these elements were described in sufficient detail to allow estimation of their technology readiness levels. These elements were assessed in terms of technology readiness level, and supporting rationale for these assessments presented. The remaining cost for development of a minimal ICHM system to technology readiness level 6 was estimated. The estimates are within an accuracy range of minus/plus 20 percent. The cost estimates cover what is needed to prepare an ICHM system for use on a focussed testbed for an expander cycle engine, excluding support to the actual test firings.

  20. 34 CFR 685.309 - Administrative and fiscal control and fund accounting requirements for schools participating in...

    Science.gov (United States)

    2010-07-01

    ... 34 Education 3 2010-07-01 2010-07-01 false Administrative and fiscal control and fund accounting... Direct Loan Program Schools § 685.309 Administrative and fiscal control and fund accounting requirements... may provide the student status confirmation report in either paper or electronic format. (c) Record...

  1. Sterilization of health care products - Radiation. Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices

    International Nuclear Information System (INIS)

    2006-01-01

    in documented work programmes designed to demonstrate that the radiation process will consi stently yield sterile products on treatment with doses falling within the predetermined limits. The requirements are the normative parts of this part of ISO 11137 with which compliance is claimed. The guidance given in the informative annexes is not normative and is not provided as a checklist for auditors. The guidance provides explanations and methods that are regarded as being a suitable means for complying with the requirements. Methods other than those given in the guidance may be used, if they are effective in achieving compliance with the requirements of this part of ISO 11137. The development, validation and routine control of a sterilization process comprise a number of discrete but interrelated activities; e.g. calibration, maintenance, product definition, process definition, installation qualification, operational qualification and performance qualification. While the activities required by this part of ISO 11137 have been grouped together and are presented in a particular order, this part of ISO 11137 does not require that the activities be performed in the order that they are presented. The activities required are not necessarily sequential, as the programme of development and validation may be iterative. It is possible that performing these different activities will involve a number of separate individuals and/or organizations, each of whom undertake one or more of these activities. This part of ISO 11137 does not specify the particular individuals or organizations to carry out the activities

  2. Manpower Requirements for Air Traffic Control and Flight Service Specialists in Indiana.

    Science.gov (United States)

    Purdue Univ., Lafayette, IN. Office of Manpower Studies.

    As of January 1, 1968 the Federal Aviation Administration (FAA) of the United States Department of Transportation employed 6,963 controllers in airport towers, 7,617 controllers in Air Route Traffic Control Centers, and 4,459 flight service specialists at airport locations. Projected needs are as follows: (1) Controllers in airport towers:…

  3. Precision of glucose measurements in control sera by isotope dilution/mass spectrometry: proposed definitive method compared with a reference method

    International Nuclear Information System (INIS)

    Pelletier, O.; Arratoon, C.

    1987-01-01

    This improved isotope-dilution gas chromatographic/mass spectrometric (GC/MS) method, in which [ 13 C]glucose is the internal standard, meets the requirements of a Definitive Method. In a first study with five reconstituted lyophilized sera, a nested analysis of variance of GC/MS values indicated considerable among-vial variation. The CV for 32 measurements per serum ranged from 0.5 to 0.9%. However, concentration and uncertainty values (mmol/L per gram of serum) assigned to one serum by the NBS Definitive Method (7.56 +/- 0.28) were practically identical to those obtained with the proposed method (7.57 +/- 0.20). In the second study, we used twice more [ 13 C]glucose diluent to assay four serum pools and two lyophilized sera. The CV ranged from 0.26 to 0.5% for the serum pools and from 0.28 to 0.59% for the lyophilized sera. In comparison, results by the hexokinase/glucose-6-phosphate dehydrogenase reference method agreed within acceptable limits with those by the Definitive Method but tended to be slightly higher (up to 3%) for lyophilized serum samples or slightly lower (up to 2.5%) for serum pools

  4. Colorado SIP: 5 CCR 1001-13, Reg 11, Motor Vehicle Emissions Inspection Program—Part A, General Provisions, Area of Applicability, Schedules for Obtaining Certification of Emissions Control, Definitions, Exemptions, and Clean Screening/Remote Sensing

    Science.gov (United States)

    Colorado SIP: 5 CCR 1001-13, Reg 11, Motor Vehicle Emissions Inspection Program—Part A, General Provisions, Area of Applicability, Schedules for Obtaining Certification of Emissions Control, Definitions, Exemptions, and Clean Screening/Remote Sensing

  5. AN ANALYSIS OF TECHNICAL SECURITY CONTROL REQUIREMENTS FOR DIGITAL I&C SYSTEMS IN NUCLEAR POWER PLANTS

    Directory of Open Access Journals (Sweden)

    JAE-GU SONG

    2013-10-01

    Full Text Available Instrumentation and control systems in nuclear power plants have been digitalized for the purpose of maintenance and precise operation. This digitalization, however, brings out issues related to cyber security. In the most recent past, international standard organizations, regulatory institutes, and research institutes have performed a number of studies addressing these systems cyber security. In order to provide information helpful to the system designers in their application of cyber security for the systems, this paper presents methods and considerations to define attack vectors in a target system, to review and select the requirements in the Regulatory Guide 5.71, and to integrate the results to identify applicable technical security control requirements. In this study, attack vectors are analyzed through the vulnerability analyses and penetration tests with a simplified safety system, and the elements of critical digital assets acting as attack vectors are identified. Among the security control requirements listed in Appendices B and C to Regulatory Guide 5.71, those that should be implemented into the systems are selected and classified in groups of technical security control requirements using the results of the attack vector analysis. For the attack vector elements of critical digital assets, all the technical security control requirements are evaluated to determine whether they are applicable and effective, and considerations in this evaluation are also discussed. The technical security control requirements in three important categories of access control, monitoring and logging, and encryption are derived and grouped according to the elements of attack vectors as results for the sample safety system.

  6. Feed tank transfer requirements

    International Nuclear Information System (INIS)

    Freeman-Pollard, J.R.

    1998-01-01

    This document presents a definition of tank turnover; DOE responsibilities; TWRS DST permitting requirements; TWRS Authorization Basis (AB) requirements; TWRS AP Tank Farm operational requirements; unreviewed safety question (USQ) requirements; records and reporting requirements, and documentation which will require revision in support of transferring a DST in AP Tank Farm to a privatization contractor for use during Phase 1B

  7. Concept definition for space station technology development experiments. Experiment definition, task 2

    Science.gov (United States)

    1986-01-01

    The second task of a study with the overall objective of providing a conceptual definition of the Technology Development Mission Experiments proposed by LaRC on space station is discussed. During this task, the information (goals, objectives, and experiment functional description) assembled on a previous task was translated into the actual experiment definition. Although still of a preliminary nature, aspects such as: environment, sensors, data acquisition, communications, handling, control telemetry requirements, crew activities, etc., were addressed. Sketches, diagrams, block diagrams, and timeline analyses of crew activities are included where appropriate.

  8. 10 CFR 60.121 - Requirements for ownership and control of interests in land.

    Science.gov (United States)

    2010-01-01

    ... either acquired lands under the jurisdiction and control of DOE, or lands permanently withdrawn and..., such as: (i) Rights arising under the general mining laws; (ii) easements for right-of-way; and (iii... postclosure controlled area. DOE shall exercise any jurisdiction and control over surface and subsurface...

  9. 49 CFR 236.1005 - Requirements for Positive Train Control systems.

    Science.gov (United States)

    2010-10-01

    .... (4) The control circuit or electronic equivalent for all movement authorities over any switches... device operated directly by the switch points, derail, or by switch locking mechanism, or through relay or electronic device controlled by such circuit controller or functionally equivalent device, for...

  10. Aircraft Loss-of-Control: Analysis and Requirements for Future Safety-Critical Systems and Their Validation

    Science.gov (United States)

    Belcastro, Christine M.

    2011-01-01

    Loss of control remains one of the largest contributors to fatal aircraft accidents worldwide. Aircraft loss-of-control accidents are complex, resulting from numerous causal and contributing factors acting alone or more often in combination. Hence, there is no single intervention strategy to prevent these accidents. This paper summarizes recent analysis results in identifying worst-case combinations of loss-of-control accident precursors and their time sequences, a holistic approach to preventing loss-of-control accidents in the future, and key requirements for validating the associated technologies.

  11. LD Definition.

    Science.gov (United States)

    Learning Disability Quarterly, 1987

    1987-01-01

    The position paper (1981) of the National Joint Committee on Learning Disabilities presents a revised definition of learning disabilities and identifies issues and concerns (such as the limitation to children and the exclusion clause) associated with the definition included in P.L. 94-142, the Education for All Handicapped Children Act. (DB)

  12. Requirements for a modern process control system (PLS); Anforderungen an ein modernes Prozessleitsystem (PLS)

    Energy Technology Data Exchange (ETDEWEB)

    Maurer, Michael [SAR Elektronic GmbH, Dingolfing (Germany)

    2012-11-01

    The process control system is of crucial importance for the process management of process engineering systems. The process control system has to enable the operation and surveillance of processes, to register critical process conditions and to provide process data for the evaluation of processes. The process control system delivers real time process data to superior process engineering systems (MES, ERP) and implements control commands of superior systems on the plant. The market of process control engineering systems is characterized by a variety of different systems, most different project specific and customer specific configurations as well as different releases. Control systems are in competition to programmable logic controllers and black boxes. The satisfaction of the user with his process control system depends significantly on the attained quality of execution of the supplying company and the used power plant library. It does not depend on the chosen brand of process control system. The availability of process control systems depends on the chosen system architecture and the chosen components, but not from the brand of process control system.

  13. Parvovirus Capsid Structures Required for Infection: Mutations Controlling Receptor Recognition and Protease Cleavages.

    Science.gov (United States)

    Callaway, Heather M; Feng, Kurtis H; Lee, Donald W; Allison, Andrew B; Pinard, Melissa; McKenna, Robert; Agbandje-McKenna, Mavis; Hafenstein, Susan; Parrish, Colin R

    2017-01-15

    Parvovirus capsids are small but complex molecular machines responsible for undertaking many of the steps of cell infection, genome packing, and cell-to-cell as well as host-to-host transfer. The details of parvovirus infection of cells are still not fully understood, but the processes must involve small changes in the capsid structure that allow the endocytosed virus to escape from the endosome, pass through the cell cytoplasm, and deliver the single-stranded DNA (ssDNA) genome to the nucleus, where viral replication occurs. Here, we examine capsid substitutions that eliminate canine parvovirus (CPV) infectivity and identify how those mutations changed the capsid structure or altered interactions with the infectious pathway. Amino acid substitutions on the exterior surface of the capsid (Gly299Lys/Ala300Lys) altered the binding of the capsid to transferrin receptor type 1 (TfR), particularly during virus dissociation from the receptor, but still allowed efficient entry into both feline and canine cells without successful infection. These substitutions likely control specific capsid structural changes resulting from TfR binding required for infection. A second set of changes on the interior surface of the capsid reduced viral infectivity by >100-fold and included two cysteine residues and neighboring residues. One of these substitutions, Cys270Ser, modulates a VP2 cleavage event found in ∼10% of the capsid proteins that also was shown to alter capsid stability. A neighboring substitution, Pro272Lys, significantly reduced capsid assembly, while a Cys273Ser change appeared to alter capsid transport from the nucleus. These mutants reveal additional structural details that explain cell infection processes of parvovirus capsids. Parvoviruses are commonly found in both vertebrate and invertebrate animals and cause widespread disease. They are also being developed as oncolytic therapeutics and as gene therapy vectors. Most functions involved in infection or transduction

  14. Parvovirus Capsid Structures Required for Infection: Mutations Controlling Receptor Recognition and Protease Cleavages

    Science.gov (United States)

    Callaway, Heather M.; Feng, Kurtis H.; Lee, Donald W.; Pinard, Melissa; McKenna, Robert; Agbandje-McKenna, Mavis; Hafenstein, Susan

    2016-01-01

    ABSTRACT Parvovirus capsids are small but complex molecular machines responsible for undertaking many of the steps of cell infection, genome packing, and cell-to-cell as well as host-to-host transfer. The details of parvovirus infection of cells are still not fully understood, but the processes must involve small changes in the capsid structure that allow the endocytosed virus to escape from the endosome, pass through the cell cytoplasm, and deliver the single-stranded DNA (ssDNA) genome to the nucleus, where viral replication occurs. Here, we examine capsid substitutions that eliminate canine parvovirus (CPV) infectivity and identify how those mutations changed the capsid structure or altered interactions with the infectious pathway. Amino acid substitutions on the exterior surface of the capsid (Gly299Lys/Ala300Lys) altered the binding of the capsid to transferrin receptor type 1 (TfR), particularly during virus dissociation from the receptor, but still allowed efficient entry into both feline and canine cells without successful infection. These substitutions likely control specific capsid structural changes resulting from TfR binding required for infection. A second set of changes on the interior surface of the capsid reduced viral infectivity by >100-fold and included two cysteine residues and neighboring residues. One of these substitutions, Cys270Ser, modulates a VP2 cleavage event found in ∼10% of the capsid proteins that also was shown to alter capsid stability. A neighboring substitution, Pro272Lys, significantly reduced capsid assembly, while a Cys273Ser change appeared to alter capsid transport from the nucleus. These mutants reveal additional structural details that explain cell infection processes of parvovirus capsids. IMPORTANCE Parvoviruses are commonly found in both vertebrate and invertebrate animals and cause widespread disease. They are also being developed as oncolytic therapeutics and as gene therapy vectors. Most functions involved in

  15. A Study on a Control Method with a Ventilation Requirement of a VAV System in Multi-Zone

    Directory of Open Access Journals (Sweden)

    Hyo-Jun Kim

    2017-11-01

    Full Text Available The objective of this study was to propose a control method with a ventilation requirement of variable air volume (VAV system in multi-zone. In order to control the VAV system inmulti-zone, it is essential to control the terminal unit installed in each zone. A VAV terminal unit with conventional control method using a fixed minimum air flow can cause indoor air quality (IAQ issues depending on the variation in the number of occupants. This research proposes a control method with a ventilation requirement of the VAV terminal unit and AHU inmulti-zone. The integrated control method with an air flow increase model in the VAV terminal unit, AHU, and outdoor air intake rate increase model in the AHU was based on the indoor CO2 concentration. The conventional and proposed control algorithms were compared through a TRNSYS simulation program. The proposed VAV terminal unit control method satisfies all the conditions of indoor temperature, IAQ, and stratification. An energy comparison with the conventional control method showed that the method satisfies not only the indoor thermal comfort, IAQ, and stratification issue, but also reduces the energy consumption.

  16. Specification of requirements for upgrades using digital instrument and control systems. Report prepared within the framework of the international working group on nuclear power plant control and instrumentation

    International Nuclear Information System (INIS)

    1999-01-01

    The need to develop good specifications of requirements for instrument and control (I and C) systems applies throughout the world and is becoming more and more important as more upgrades are planned. Better guidance on how to develop good requirements specifications would support safer, more effective and more economical refits and upgrades. The need for this was pointed out by the IAEA International Working Group on Nuclear Power Plant Control and Instrumentation (IWG-NPPCI). This report is the result of a series of advisory and consultants meetings held by the IAEA in 1997 and 1998 in Vienna. The scope of the activities described covers a methodology for the determination of requirements and the development of the necessary specifications and plans needed through the life-cycle of digital instrumentation and control systems. It is restricted to technical aspects and indicates subjects which should be included in specifications and plans at different phases

  17. Age-related postoperative morphine requirements in children following major surgery--an assessment using patient-controlled analgesia (PCA)

    DEFF Research Database (Denmark)

    Hansen, Tom Giedsing; Henneberg, Steen Winther; Hole, P

    1996-01-01

    To investigate if small children require less morphine for postoperative analgesia than do older children and adolescents we analysed the morphine consumption pattern of 28 consecutive children on intravenous patient-controlled analgesia (PCA) following major surgery. The median age-specific morp......To investigate if small children require less morphine for postoperative analgesia than do older children and adolescents we analysed the morphine consumption pattern of 28 consecutive children on intravenous patient-controlled analgesia (PCA) following major surgery. The median age...

  18. Parametric Synthesis of Automatic Control System of Industrial Robot Manipulator in Compliance with Requirements of Robust Quality

    Directory of Open Access Journals (Sweden)

    A. A. Nesenchuk

    2004-01-01

    Full Text Available The paper considers an application of a root-locus method for synthesis of dynamic systems with uncertainty that meet the requirements of pre-set quality. This method is used for parametric synthesis of automatic control system of industrial robot manipulator that is used for transportation of engineering products. The synthesis takes place under conditions of substantial changes in inertia moment of robot load. As a result of investigations it is possible to determine range of values of variable parameter that ensures the required quality of control system operation. A system of computer programs has been developed in order to solve the problem.

  19. 10 CFR 830.3 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... structures, systems, and components; (3) Safety management programs; (4) Technical safety requirements; and..., construction, fabrication, assembly, decontamination, environmental restoration, waste management, laboratory... ENERGY NUCLEAR SAFETY MANAGEMENT § 830.3 Definitions. (a) The following definitions apply to this part...

  20. Definitions, qualifications and requirements for radiation protection experts, radiation protection officers and radiation workers: results of the 2 nd EUTERP Workshop

    International Nuclear Information System (INIS)

    Draaisma, Folkert S.; Steen, Jan van der

    2008-01-01

    Full text: In Europe, a common vision for maintaining competence in radiation protection is emerging, focussing on a common denominator for qualification of radiation protection experts (RPEs) and radiation protection officers (RPOs) and for mutual recognition and mobility of these professionals across the European Union. Therefore, the European Commission, D.-G. Transport and Energy, has launched an initiative to establish a European Radiation Protection Training and Education Platform (EUTERP Platform). The objectives of the Platform can be summarised as: to facilitate the trans national access to vocational education and training; to better integrate education and training into occupational radiation protection infrastructures in the Member, Candidate and Associated States of the European Union. The Platform ensures a permanent dialogue between all involved parties by the use of its web site (www.euterp.eu), by issuing newsletters and by organising workshops. The first workshop has been held in Vilnius, 22-24 May 2007, and resulted in 8 recommendations to the European Commission, the IAEA, IRPA and national authorities. The recommendations were, a.o., dealing with: new definitions for the Radiation Protection Expert (RPE) and the Radiation Protection Officer (RPO), which should be used in the revision of both the EURATOM and the International BSS; developing guidance for a methodology to compare the quality of training courses and training material; developing guidance for a standardized methodology of assessing the recognition of RP professionals as a basis for future mutual recognition, based on a description of roles and duties, education, training and work experience; developing guidance for a formal recognition process of the competence of RPEs and RPOs. The second workshop will be held on 23-25 April 2008, again in Vilnius, and will specifically discuss the above-mentioned proposals for new definitions and guidance material. It is expected that the

  1. When Optimal Feedback Control Is Not Enough: Feedforward Strategies Are Required for Optimal Control with Active Sensing.

    Directory of Open Access Journals (Sweden)

    Sang-Hoon Yeo

    2016-12-01

    Full Text Available Movement planning is thought to be primarily determined by motor costs such as inaccuracy and effort. Solving for the optimal plan that minimizes these costs typically leads to specifying a time-varying feedback controller which both generates the movement and can optimally correct for errors that arise within a movement. However, the quality of the sensory feedback during a movement can depend substantially on the generated movement. We show that by incorporating such state-dependent sensory feedback, the optimal solution incorporates active sensing and is no longer a pure feedback process but includes a significant feedforward component. To examine whether people take into account such state-dependency in sensory feedback we asked people to make movements in which we controlled the reliability of sensory feedback. We made the visibility of the hand state-dependent, such that the visibility was proportional to the component of hand velocity in a particular direction. Subjects gradually adapted to such a sensory perturbation by making curved hand movements. In particular, they appeared to control the late visibility of the movement matching predictions of the optimal controller with state-dependent sensory noise. Our results show that trajectory planning is not only sensitive to motor costs but takes sensory costs into account and argues for optimal control of movement in which feedforward commands can play a significant role.

  2. When Optimal Feedback Control Is Not Enough: Feedforward Strategies Are Required for Optimal Control with Active Sensing.

    Science.gov (United States)

    Yeo, Sang-Hoon; Franklin, David W; Wolpert, Daniel M

    2016-12-01

    Movement planning is thought to be primarily determined by motor costs such as inaccuracy and effort. Solving for the optimal plan that minimizes these costs typically leads to specifying a time-varying feedback controller which both generates the movement and can optimally correct for errors that arise within a movement. However, the quality of the sensory feedback during a movement can depend substantially on the generated movement. We show that by incorporating such state-dependent sensory feedback, the optimal solution incorporates active sensing and is no longer a pure feedback process but includes a significant feedforward component. To examine whether people take into account such state-dependency in sensory feedback we asked people to make movements in which we controlled the reliability of sensory feedback. We made the visibility of the hand state-dependent, such that the visibility was proportional to the component of hand velocity in a particular direction. Subjects gradually adapted to such a sensory perturbation by making curved hand movements. In particular, they appeared to control the late visibility of the movement matching predictions of the optimal controller with state-dependent sensory noise. Our results show that trajectory planning is not only sensitive to motor costs but takes sensory costs into account and argues for optimal control of movement in which feedforward commands can play a significant role.

  3. HALE UAS Command and Control Communications: Step 1 - Functional Requirements Document. Version 4.0

    Science.gov (United States)

    2006-01-01

    The High Altitude Long Endurance (HALE) unmanned aircraft system (UAS) communicates with an off-board pilot-in-command in all flight phases via the C2 data link, making it a critical component for the UA to fly in the NAS safely and routinely. This is a new requirement in current FAA communications planning and monitoring processes. This document provides a set of comprehensive C2 communications functional requirements and performance guidelines to help facilitate the future FAA certification process for civil UAS to operate in the NAS. The objective of the guidelines is to provide the ability to validate the functional requirements and in future be used to develop performance-level requirements.

  4. Navy Requirements for Controlling Multiple Off-Board Robots Using the Autonomous Unmanned Vehicle Workbench

    National Research Council Canada - National Science Library

    Monroe, Dennis W

    2007-01-01

    ... after a mission. This thesis examines a variety of strategic authoritative plans for autonomous vehicles to determine functional mission requirements that autonomous vehicles are expected to be performing in the near future...

  5. Development of equipment qualification requirements for NPP instrumentation and control systems

    International Nuclear Information System (INIS)

    Siora, A. A.; Reshetitskij, S. V.; Harybin, A. V.

    2012-01-01

    The main stages of equipment qualification are presented. The aim of the work is to ensure compatibility between Ukrainian and international requirements. A comparison with US NRC requirements has been done. The approach in equipment qualification is presented for the resistance to: irradiation; dust; seismic motion, vibrations and mechanical impact; environmental impact (temperature, humidity, pressure); power supply parameters etc., as well as the technological testing

  6. Determining required valve performance for discrete control of PTO cylinders for wave energy

    DEFF Research Database (Denmark)

    Hansen, Rico Hjerm; Andersen, Torben Ole; Pedersen, Henrik C.

    2012-01-01

    investigates the required valve performance to achieve this energy efficient operation, while meeting basic dynamic requirements. The components making up the total energy loss during shifting is identified by analytically expressing the losses from the governing differential equations. From the analysis...... a framework for evaluating the adequacy of a valve’s response is established, and the analysis shows the results may be normalised for a wider range of systems. Finally, the framework is successfully applied to the Wavestar converter....

  7. [Prospects in getting accordance between chemical analytic control means and medical technical requirements to safety system concerning chemical weapons destruction].

    Science.gov (United States)

    Rembovskiĭ, V R; Mogilenkova, L A; Savel'eva, E I

    2005-01-01

    The major unit monitoring chemical weapons destruction objects is a system of chemical analyticcontrol over the technologic process procedures and possibility of environment and workplace pollution withtoxicchemicals and their destruction products. At the same time, physical and chemical control means meet sanitary and hygienic requirements incompletely. To provide efficient control, internationally recognized approaches should be adapted to features of Russian system monitoring pollution of chemical weapons destruction objects with toxic chemicals.

  8. Requirements and analysis of electromagnetic compatibility of safety-related instrumentation and control system in nuclear power plants

    International Nuclear Information System (INIS)

    Liu Sujuan

    2002-01-01

    The state-of-the-art instrumentation and control system and the influence of their application to the electromagnetic compatibility is analyzed. Based on the present situation of nuclear safety in China and relevant experiences from other countries, the author tries to probe into the requirements and test methods about how safety-related instrument and control system to accommodate electromagnetic interference, radio-frequency interference and power surges in the environments of nuclear power plant so as to develop Chinese safety standards

  9. 10 CFR 63.121 - Requirements for ownership and control of interests in land.

    Science.gov (United States)

    2010-01-01

    ... under the jurisdiction and control of DOE, or lands permanently withdrawn and reserved for its use. (2... under the general mining laws; (ii) Easements for right-of-way; and (iii) All other rights arising under... repository operations area. DOE shall exercise any jurisdiction and control over surface and subsurface...

  10. 75 FR 41078 - Revisions to the Commerce Control List To Update and Clarify Crime Control License Requirements

    Science.gov (United States)

    2010-07-15

    ... equipment which serve different functions, namely analysis technologies, biometric technologies and penal... proposed rule; whether, and, if so, the extent to which biometric measuring devices, integrated data... to which software and technology related to commodities on the Commerce Control List should be listed...

  11. How many research nurses for how many clinical trials in an oncology setting? Definition of the Nursing Time Required by Clinical Trial-Assessment Tool (NTRCT-AT).

    Science.gov (United States)

    Milani, Alessandra; Mazzocco, Ketti; Stucchi, Sara; Magon, Giorgio; Pravettoni, Gabriella; Passoni, Claudia; Ciccarelli, Chiara; Tonali, Alessandra; Profeta, Teresa; Saiani, Luisa

    2017-02-01

    Few resources are available to quantify clinical trial-associated workload, needed to guide staffing and budgetary planning. The aim of the study is to describe a tool to measure clinical trials nurses' workload expressed in time spent to complete core activities. Clinical trials nurses drew up a list of nursing core activities, integrating results from literature searches with personal experience. The final 30 core activities were timed for each research nurse by an outside observer during daily practice in May and June 2014. Average times spent by nurses for each activity were calculated. The "Nursing Time Required by Clinical Trial-Assessment Tool" was created as an electronic sheet that combines the average times per specified activities and mathematic functions to return the total estimated time required by a research nurse for each specific trial. The tool was tested retrospectively on 141 clinical trials. The increasing complexity of clinical research requires structured approaches to determine workforce requirements. This study provides a tool to describe the activities of a clinical trials nurse and to estimate the associated time required to deliver individual trials. The application of the proposed tool in clinical research practice could provide a consistent structure for clinical trials nursing workload estimation internationally. © 2016 John Wiley & Sons Australia, Ltd.

  12. Goal Definition

    DEFF Research Database (Denmark)

    Bjørn, Anders; Laurent, Alexis; Owsianiak, Mikołaj

    2018-01-01

    The goal definition is the first phase of an LCA and determines the purpose of a study in detail. This chapter teaches how to perform the six aspects of a goal definition: (1) Intended applications of the results, (2) Limitations due to methodological choices, (3) Decision context and reasons...... for carrying out the study, (4) Target audience , (5) Comparative studies to be disclosed to the public and (6) Commissioner of the study and other influential actors. The instructions address both the conduct and reporting of a goal definition and are largely based on the ILCD guidance document (EC...

  13. A Parametric Study of Actuator Requirements for Active Turbine Tip Clearance Control of a Modern High Bypass Turbofan Engine

    Science.gov (United States)

    Kratz, Jonathan L.; Chapman, Jeffryes W.; Guo, Ten-Huei

    2017-01-01

    The efficiency of aircraft gas turbine engines is sensitive to the distance between the tips of its turbine blades and its shroud, which serves as its containment structure. Maintaining tighter clearance between these components has been shown to increase turbine efficiency, increase fuel efficiency, and reduce the turbine inlet temperature, and this correlates to a longer time-on-wing for the engine. Therefore, there is a desire to maintain a tight clearance in the turbine, which requires fast response active clearance control. Fast response active tip clearance control will require an actuator to modify the physical or effective tip clearance in the turbine. This paper evaluates the requirements of a generic active turbine tip clearance actuator for a modern commercial aircraft engine using the Commercial Modular Aero-Propulsion System Simulation 40k (C-MAPSS40k) software that has previously been integrated with a dynamic tip clearance model. A parametric study was performed in an attempt to evaluate requirements for control actuators in terms of bandwidth, rate limits, saturation limits, and deadband. Constraints on the weight of the actuation system and some considerations as to the force which the actuator must be capable of exerting and maintaining are also investigated. From the results, the relevant range of the evaluated actuator parameters can be extracted. Some additional discussion is provided on the challenges posed by the tip clearance control problem and the implications for future small core aircraft engines.

  14. Contamination control requirements implementation for the James Webb Space Telescope (JWST), part 2: spacecraft, sunshield, observatory, and launch

    Science.gov (United States)

    Wooldridge, Eve M.; Schweiss, Andrea; Henderson-Nelson, Kelly; Woronowicz, Michael; Patel, Jignasha; Macias, Matthew; McGregor, R. Daniel; Farmer, Greg; Schmeitzky, Olivier; Jensen, Peter; Rumler, Peter; Romero, Beatriz; Breton, Jacques

    2014-09-01

    This paper will continue from Part 1 of JWST contamination control implementation. In addition to optics, instruments, and thermal vacuum testing, JWST also requires contamination control for a spacecraft that must be vented carefully in order to maintain solar array and thermal radiator thermal properties; a tennis court-sized sunshield made with 1-2 mil Kapton™ layers that must be manufactured and maintained clean; an observatory that must be integrated, stowed and transported to South America; and a rocket that typically launches commercial payloads without contamination sensitivity. An overview of plans developed to implement contamination control for the JWST spacecraft, sunshield, observatory and launch vehicle will be presented.

  15. Assessing blood flow, microvasculature, erythema and redness in hypertrophic scars: A cross sectional study showing different features that require precise definitions.

    Science.gov (United States)

    Jaspers, M E H; Stekelenburg, C M; Simons, J M; Brouwer, K M; Vlig, M; van den Kerckhove, E; Middelkoop, E; van Zuijlen, P P M

    2017-08-01

    In hypertrophic scar assessment, laser Doppler imaging (LDI), colorimetry and subjective assessment (POSAS) can be used to evaluate blood flow, erythema and redness, respectively. In addition, the microvasculature (i.e. presence of microvessels) can be determined by immunohistochemistry. These measurement techniques are frequently used in clinical practice and/or in research to evaluate treatment response and monitor scar development. However, until now it has not been tested to what extent the outcomes of these techniques are associated, whilst the outcome terms are frequently used interchangeably or replaced by the umbrella term 'vascularization'. This is confusing, as every technique seems to measure a specific feature. Therefore, we evaluated the correlations of the four measurement techniques. We included 32 consecutive patients, aged ≥18 years, who underwent elective resection of a hypertrophic scar. Pre-operatively, we performed LDI (measuring blood flow), colorimetry (measuring erythema) and the POSAS (subjective redness) within the predefined scar area of interest (∼1.5cm). Subsequently, the scar was excised and the area of interest was sent for immunohistochemistry, to determine the presence of microvessels. Only a statistically significant correlation was found between erythema values (colorimetry) and subjective redness assessment (POSAS) (r=0.403, p=0.030). We found no correlations between the outcomes of LDI, immunohistochemistry and colorimetry. Blood flow, the presence of microvessels and erythema appear to be different hypertrophic scar features because they show an absence of correlation. Therefore, in the field of scar assessment, these outcome terms cannot be used interchangeably. In addition, we conclude that the term 'vascularization' does not seem appropriate to serve as an umbrella term. The use of precise definitions in research as well as in clinical practice is recommended. Copyright © 2017 Elsevier Ltd and ISBI. All rights reserved.

  16. Research and Development for Health and Environmental Hazard Assessment -Task Order 2. Problem Definition of R and D Requirements for Field Sanitation and Water Supply.

    Science.gov (United States)

    1982-09-01

    34Development of a Kit for Hazardous Material Spills into Waterways," Edgewood Arsenal Special Publication ED- SP - 76023, 1976. Department of the Army...hepatitis, entamoeba hystolitica are more resistant and require free available chlorine residuals of 10 mg/l in cold weather and levels of 2, 5, 10

  17. THE DUAL CONTROL – A REQUIREMENT OF THE CURRENT BANK MANAGEMENT

    Directory of Open Access Journals (Sweden)

    ALINA MATIȘ

    2014-10-01

    Full Text Available Security is a major problem of the banking industry, which bases its whole system on the reputation the bank manages to establish and then maintain among its customers. With the manifestation of information security issues and in interdependence with them, the need for internal control also developed, both of them being associated with modern risk management practices. As the concept of internal control has been rising as a major concern of management and corporate governance, there are attempts to classify it and distinguish it in different categories, dual control being a result of this process. The authors of this study attempt to present the concept of dual control as it is currently applied in the banking system, trying to analyze contextually its capacities of fraud detection, its consequences in terms of risk and costs as well as its effects on bank performance.

  18. Congressional Award Foundation: Management Action Still Needed to Establish and Document Control Requirements and Related Procedures

    National Research Council Canada - National Science Library

    Calbom, Linda

    2000-01-01

    .... The purpose of this management letter is to reemphasize the continuing need for the Foundation's management to strengthen internal controls, especially in the five areas previously reported to you in our July 1999 management letter.

  19. Single Operator Control of Multiple Uninhabited Air Vehicles: Situational Awareness Requirement

    National Research Council Canada - National Science Library

    Sebalj, Derek

    2008-01-01

    ... > 1. The ultimate goal, and the object of much research, is the technology to lower, or even invert the control ratio from many people to one vehicle to one operator of several vehicles, e.g., 1...

  20. Requirements and Challenges of Location-Based Access Control in Healthcare Emergency Response

    DEFF Research Database (Denmark)

    Vicente, Carmen Ruiz; Kirkpatrick, Michael; Ghinita, Gabriel

    2009-01-01

    Recent advances in positioning and tracking technologies have led to the emergence of novel location-based applications that allow participants to access information relevant to their spatio-temporal context. Traditional access control models, such as role-based access control (RBAC), are not suf...... to such settings. We overview the main technical issues to be addressed, and we describe the architecture for policy decision and enforcement points....

  1. Quasicrystals: A matter of definition

    OpenAIRE

    Lifshitz, Ron

    2003-01-01

    It is argued that the prevailing definition of quasicrystals, requiring them to contain an axis of symmetry that is forbidden in periodic crystals, is inadequate. This definition is too restrictive in that it excludes an important and interesting collection of structures that exhibit all the well-known properties of quasicrystals without possessing any forbidden symmetries.

  2. Computer system requirements specification for 101-SY hydrogen mitigation test project data acquisition and control system (DACS-1)

    International Nuclear Information System (INIS)

    McNeece, S.G.; Truitt, R.W.

    1994-01-01

    The system requirements specification for SY-101 hydrogen mitigation test project (HMTP) data acquisition and control system (DACS-1) documents the system requirements for the DACS-1 project. The purpose of the DACS is to provide data acquisition and control capabilities for the hydrogen mitigation testing of Tank SY-101. Mitigation testing uses a pump immersed in the waste, directed at varying angles and operated at different speeds and time durations. Tank and supporting instrumentation is brought into the DACS to monitor the status of the tank and to provide information on the effectiveness of the mitigation test. Instrumentation is also provided for closed loop control of the pump operation. DACS is also capable for being expanded to control and monitor other mitigation testing. The intended audience for the computer system requirements specification includes the SY-101 hydrogen mitigation test data acquisition and control system designers: analysts, programmers, instrument engineers, operators, maintainers. It is intended for the data users: tank farm operations, mitigation test engineers, the Test Review Group (TRG), data management support staff, data analysis, Hanford data stewards, and external reviewers

  3. 40 CFR 112.11 - Spill Prevention, Control, and Countermeasure Plan requirements for offshore oil drilling...

    Science.gov (United States)

    2010-07-01

    ... POLLUTION PREVENTION Requirements for Petroleum Oils and Non-Petroleum Oils, Except Animal Fats and Oils and Greases, and Fish and Marine Mammal Oils; and Vegetable Oils (Including Oils from Seeds, Nuts, Fruits, and... equipped with dump valves which predominantly fail in the closed position and where pollution risk is high...

  4. 40 CFR 112.9 - Spill Prevention, Control, and Countermeasure Plan Requirements for onshore oil production...

    Science.gov (United States)

    2010-07-01

    ... measures required under § 112.7(c)(1), except when draining uncontaminated rainwater. Prior to drainage... with legally approved methods. (2) Inspect at regularly scheduled intervals field drainage systems... prevention and containment procedures listed under this section. (b) Oil production facility drainage. (1) At...

  5. Technical report of comparison in design control on R and D and industrial quality requirements

    International Nuclear Information System (INIS)

    Kim, Kwan Hyun

    2000-06-01

    This technical report provides the methods on how to establish the requirements on nuclear R and D facilities. This report applies to the quality assurance(QA) programmes of the design, fabrication in research reactor. The organization having overall responsibility for the nuclear power item design, preservation, fabrication shall be described in this report in each stage of nuclear project

  6. Soil erosion and sediment control laws. A review of state laws and their natural resource data requirements

    Science.gov (United States)

    Klein, S. B.

    1980-01-01

    Twenty states, the District of Columbia, and the Virgin Islands enacted erosion and sediment control legislation during the past decade to provide for the implementation or the strengthening of statewide erosion and sediment control plans for rural and/or urban lands. That legislation and the state programs developed to implement these laws are quoted and reviewed. The natural resource data requirements of each program are also extracted. The legislation includes amendments to conservation district laws, water quality laws, and erosion and sediment control laws. Laws which provides for legislative review of administrative regulations and LANDSAT applications and/or information systems that were involved in implementing or gathering data for a specific soil erosion and sediment control program are summarized as well as principal concerns affecting erosion and sediment control laws.

  7. Virtual reality technology as a tool for human factors requirements evaluation in design of the nuclear reactors control desks

    International Nuclear Information System (INIS)

    Grecco, Claudio H.S.; Santos, Isaac J.A.L.; Mol, Antonio C.A.; Carvalho, Paulo V.R.; Silva, Antonio C.F.; Ferreira, Francisco J.O.; Dutra, Marco A.M.

    2007-01-01

    The Virtual Reality (VR) is an advanced computer interface technology that allows the user to internet or to explore a three-dimensional environment through the computer, as was part of the virtual world. This technology presents great applicability in the most diverse areas of the human knowledge. This paper presents a study on the use of the VR as tool for human factors requirements evaluation in design of the nuclear reactors control desks. Moreover, this paper presents a case study: a virtual model of the control desk, developed using virtual reality technology to be used in the human factors requirements evaluation. This case study was developed in the Virtual Reality Laboratory at IEN, and understands the stereo visualization of the Argonauta research nuclear reactor control desk for a static ergonomic evaluation using check-lists, in accordance to the standards and human factors nuclear international guides (IEC 1771, NUREG-0700). (author)

  8. Virtual reality technology as a tool for human factors requirements evaluation in design of the nuclear reactors control desks

    Energy Technology Data Exchange (ETDEWEB)

    Grecco, Claudio H.S.; Santos, Isaac J.A.L.; Mol, Antonio C.A.; Carvalho, Paulo V.R.; Silva, Antonio C.F.; Ferreira, Francisco J.O.; Dutra, Marco A.M. [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)]. E-mail: grecco@ien.gov.br; luquetti@ien.gov.br; mol@ien.gov.br; paulov@ien.gov.br; tonico@ien.gov.br; fferreira@ien.gov.br; dutra@ien.gov.br

    2007-07-01

    The Virtual Reality (VR) is an advanced computer interface technology that allows the user to internet or to explore a three-dimensional environment through the computer, as was part of the virtual world. This technology presents great applicability in the most diverse areas of the human knowledge. This paper presents a study on the use of the VR as tool for human factors requirements evaluation in design of the nuclear reactors control desks. Moreover, this paper presents a case study: a virtual model of the control desk, developed using virtual reality technology to be used in the human factors requirements evaluation. This case study was developed in the Virtual Reality Laboratory at IEN, and understands the stereo visualization of the Argonauta research nuclear reactor control desk for a static ergonomic evaluation using check-lists, in accordance to the standards and human factors nuclear international guides (IEC 1771, NUREG-0700). (author)

  9. Out-reach in-space technology experiments program: Control of flexible robot manipulators in zero gravity, experiment definition phase

    Science.gov (United States)

    Phillips, Warren F.

    1989-01-01

    The results obtained show that it is possible to control light-weight robots with flexible links in a manner that produces good response time and does not induce unacceptable link vibrations. However, deflections induced by gravity cause large static position errors with such a control system. For this reason, it is not possible to use this control system for controlling motion in the direction of gravity. The control system does, on the other hand, have potential for use in space. However, in-space experiments will be needed to verify its applicability to robots moving in three dimensions.

  10. Modulation of brain activity during a Stroop inhibitory task by the kind of cognitive control required.

    Directory of Open Access Journals (Sweden)

    Julien Grandjean

    Full Text Available This study used a proportion congruency manipulation in the Stroop task in order to investigate, at the behavioral and brain substrate levels, the predictions derived from the Dual Mechanisms of Control (DMC account of two distinct modes of cognitive control depending on the task context. Three experimental conditions were created that varied the proportion congruency: mostly incongruent (MI, mostly congruent (MC, and mostly neutral (MN contexts. A reactive control strategy, which corresponds to transient interference resolution processes after conflict detection, was expected for the rare conflicting stimuli in the MC context, and a proactive strategy, characterized by a sustained task-relevant focus prior to the occurrence of conflict, was expected in the MI context. Results at the behavioral level supported the proactive/reactive distinction, with the replication of the classic proportion congruent effect (i.e., less interference and facilitation effects in the MI context. fMRI data only partially supported our predictions. Whereas reactive control for incongruent trials in the MC context engaged the expected fronto-parietal network including dorsolateral prefrontal cortex (DLPFC and anterior cingulate cortex, proactive control in the MI context was not associated with any sustained lateral prefrontal cortex activations, contrary to our hypothesis. Surprisingly, incongruent trials in the MI context elicited transient activation in common with incongruent trials in the MC context, especially in DLPFC, superior parietal lobe, and insula. This lack of sustained activity in MI is discussed in reference to the possible involvement of item-specific rather than list-wide mechanisms of control in the implementation of a high task-relevant focus.

  11. Real-time simulation requirements for study and optimization of power system controls

    Energy Technology Data Exchange (ETDEWEB)

    Nakra, Harbans; McCallum, David; Gagnon, Charles [Institut de Recherche d` Hydro-Quebec, Quebec, PQ (Canada); Venne, Andre; Gagnon, Julien [Hydro-Quebec, Montreal, PQ (Canada)

    1994-12-31

    At the time of ordering for the multi-terminal dc system linking Hydro-Quebec with New England, Hydro-Quebec also ordered functionally duplicate controls of all the converters and installed these in its real time simulation laboratory. The Hydro-Quebec ac system was also simulated in detail and the testing of the controls as thus made possible in a realistic environment. Many field tests were duplicated and many additional tests were done for correction and optimization. This paper describes some of the features of the real-time simulation carried out for this purpose. (author) 3 figs.

  12. Hazard Analysis of Software Requirements Specification for Process Module of FPGA-based Controllers in NPP

    Energy Technology Data Exchange (ETDEWEB)

    Jung; Sejin; Kim, Eui-Sub; Yoo, Junbeom [Konkuk University, Seoul (Korea, Republic of); Keum, Jong Yong; Lee, Jang-Soo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    Software in PLC, FPGA which are used to develop I and C system also should be analyzed to hazards and risks before used. NUREG/CR-6430 proposes the method for performing software hazard analysis. It suggests analysis technique for software affected hazards and it reveals that software hazard analysis should be performed with the aspects of software life cycle such as requirements analysis, design, detailed design, implements. It also provides the guide phrases for applying software hazard analysis. HAZOP (Hazard and operability analysis) is one of the analysis technique which is introduced in NUREG/CR-6430 and it is useful technique to use guide phrases. HAZOP is sometimes used to analyze the safety of software. Analysis method of NUREG/CR-6430 had been used in Korea nuclear power plant software for PLC development. Appropriate guide phrases and analysis process are selected to apply efficiently and NUREG/CR-6430 provides applicable methods for software hazard analysis is identified in these researches. We perform software hazard analysis of FPGA software requirements specification with two approaches which are NUREG/CR-6430 and HAZOP with using general GW. We also perform the comparative analysis with them. NUREG/CR-6430 approach has several pros and cons comparing with the HAZOP with general guide words and approach. It is enough applicable to analyze the software requirements specification of FPGA.

  13. Bacterial Cell Enlargement Requires Control of Cell Wall Stiffness Mediated by Peptidoglycan Hydrolases.

    Science.gov (United States)

    Wheeler, Richard; Turner, Robert D; Bailey, Richard G; Salamaga, Bartłomiej; Mesnage, Stéphane; Mohamad, Sharifah A S; Hayhurst, Emma J; Horsburgh, Malcolm; Hobbs, Jamie K; Foster, Simon J

    2015-07-28

    Most bacterial cells are enclosed in a single macromolecule of the cell wall polymer, peptidoglycan, which is required for shape determination and maintenance of viability, while peptidoglycan biosynthesis is an important antibiotic target. It is hypothesized that cellular enlargement requires regional expansion of the cell wall through coordinated insertion and hydrolysis of peptidoglycan. Here, a group of (apparent glucosaminidase) peptidoglycan hydrolases are identified that are together required for cell enlargement and correct cellular morphology of Staphylococcus aureus, demonstrating the overall importance of this enzyme activity. These are Atl, SagA, ScaH, and SagB. The major advance here is the explanation of the observed morphological defects in terms of the mechanical and biochemical properties of peptidoglycan. It was shown that cells lacking groups of these hydrolases have increased surface stiffness and, in the absence of SagB, substantially increased glycan chain length. This indicates that, beyond their established roles (for example in cell separation), some hydrolases enable cellular enlargement by making peptidoglycan easier to stretch, providing the first direct evidence demonstrating that cellular enlargement occurs via modulation of the mechanical properties of peptidoglycan. Understanding bacterial growth and division is a fundamental problem, and knowledge in this area underlies the treatment of many infectious diseases. Almost all bacteria are surrounded by a macromolecule of peptidoglycan that encloses the cell and maintains shape, and bacterial cells must increase the size of this molecule in order to enlarge themselves. This requires not only the insertion of new peptidoglycan monomers, a process targeted by antibiotics, including penicillin, but also breakage of existing bonds, a potentially hazardous activity for the cell. Using Staphylococcus aureus, we have identified a set of enzymes that are critical for cellular enlargement. We

  14. 14 CFR 21.143 - Quality control data requirements; prime manufacturer.

    Science.gov (United States)

    2010-01-01

    ... with a chart indicating the functional relationship of the quality control organization to management..., purchased items, and parts and assemblies produced by manufacturers' suppliers including methods used to... delegation of authority to suppliers to make major inspections of parts or assemblies for which the prime...

  15. 40 CFR 141.82 - Description of corrosion control treatment requirements.

    Science.gov (United States)

    2010-07-01

    ... adversely affected other water treatment processes when used by another water system with comparable water... the effect of the chemicals used for corrosion control treatment on other water quality treatment... compound is used); (viii) Silicate (when an inhibitor containing a silicate compound is used); (ix) Water...

  16. Generic Planning and Control of Automated Material Handling Systems: Practical Requirements Versus Existing Theroy.

    NARCIS (Netherlands)

    Haneyah, S.W.A.; Zijm, Willem H.M.; Schutten, Johannes M.J.; Schuur, Peter

    2011-01-01

    This paper discusses the problem of generic planning and control of Automated Material Handling Systems (AMHSs). The paper illustrates the relevance of this research direction, and then addresses three different market sectors where AMHSs are used. These market sectors are: baggage handling,

  17. 40 CFR 82.13 - Recordkeeping and reporting requirements for class I controlled substances.

    Science.gov (United States)

    2010-07-01

    ... subpart) and will not be resold or used in manufacturing. (xiii) The amount of class I, Group VI... class II controlled substances; (xii) The U.S. Customs entry form; (xiii) Dated records documenting the..., an annual list of the amount of critical use methyl bromide bought; (ii) For critical uses of class I...

  18. Lateral control required for satisfactory flying qualities based on flight tests of numerous airplanes

    Science.gov (United States)

    Gilruth, R R; Turner, W N

    1941-01-01

    Report presents the results of an analysis made of the aileron control characteristics of numerous airplanes tested in flight by the National Advisory Committee for Aeronautics. By the use of previously developed theory, the observed values of pb/2v for the various wing-aileron arrangements were examined to determine the effective section characteristics of the various aileron types.

  19. 27 CFR 73.11 - What are the required components and controls for acceptable electronic signatures?

    Science.gov (United States)

    2010-04-01

    ... components and controls for acceptable electronic signatures? 73.11 Section 73.11 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY (CONTINUED) PROCEDURES AND PRACTICES ELECTRONIC SIGNATURES; ELECTRONIC SUBMISSION OF FORMS Electronic Signatures § 73.11...

  20. 78 FR 48683 - Announcement of Requirements and Registration for Million Hearts® Hypertension Control Challenge

    Science.gov (United States)

    2013-08-09

    ... and integrating team-based approaches to care, as well as community approaches, such as strengthening... control hypertension may be shared in documents or other communication products that describe generally... marketing. Winners are permitted to cite that they won this challenge. The names, cities, and states of...

  1. PSA requirements for use in the safety management. Risk based indicators and the configurational control

    International Nuclear Information System (INIS)

    Szikszai, T.

    1994-01-01

    The purpose of this document is to show the role of the risk based indicators- namely the core damage frequency (CDFI), the core damage probability indicators (CDPI) and the importance of the equipment together- in the risk based configuration control. 1 fig

  2. 46 CFR 62.35-50 - Tabulated monitoring and safety control requirements for specific systems.

    Science.gov (United States)

    2010-10-01

    ... Status Main (Propulsion steam) turbine (2) (2) (2) (4, 5) Manual trip Main propulsion, diesel (1) (1) (1... lubrication Pressure Low Main propulsion, controllable pitch propeller Hydraulic oil Pressure High, Low...) Gas turbine (8) (8) (8) (8) (5) Engines and turbines Jacking/turning gear Engaged (8) Fuel oil (9) (9...

  3. Generic planning and control of automated material handling systems : practical requirements versus existing theory

    NARCIS (Netherlands)

    Haneyah, S.W.A.; Schutten, Johannes M.J.; Schuur, Peter; Zijm, Willem H.M.

    2013-01-01

    This paper discusses the problem to design a generic planning and control architecture for utomated material handling systems (AMHSs). We illustrate the relevance of this research direction, and then address three different market sectors where AMHSs are used, i.e., baggage handling, distribution,

  4. The increased use of radiation requires enhanced activities regarding radiation safety control

    International Nuclear Information System (INIS)

    Lee, Yun Jong; Lee, Jin Woo; Jeong, Gyo Seong

    2015-01-01

    More recently, companies that have obtained permission to use radioactive materials or radiation device and registered radiation workers have increased by 10% and 4% respectively. The increased use of radiation could have an effect on radiation safety control. However, there is not nearly enough manpower and budget compared to the number of workers and facilities. This paper will suggest a counteroffer thought analyzing pending issues. The results of this paper indicate that there are 47 and 31.3 workers per radiation protection officer in educational and research institutes, respectively. There are 20.1 persons per RPO in hospitals, even though there are 2 RPOs appointed. Those with a special license as a radioisotope handler were ruled out as possible managers because medical doctors who have a special license for radioisotope handling normally have no experience with radiation safety. The number of staff members and budget have been insufficient for safety control at most educational and research institutes. It is necessary to build an optimized safety control system for effective Radiation Safety Control. This will reduce the risk factor of safety, and a few RPOs can be supplied for efficiency and convenience

  5. Use of plasma waves to create in Tokamaks quasi-stationary conditions required for controlled fusion

    International Nuclear Information System (INIS)

    Moreau, D.

    1993-04-01

    In this thesis are studied the coupling of hybrid waves to the plasma, multijunction antennas, hybrid wave stochastic propagation, fast wave current drive and lower-hybrid current drive experiments in Tore Supra and Jet. The possibility of decoupling current density profile and temperature give one more degree of freedom for the control of plasma in a configuration which is not very flexible

  6. Anterior Cingulate Cortex Input to the Claustrum Is Required for Top-Down Action Control

    Directory of Open Access Journals (Sweden)

    Michael G. White

    2018-01-01

    Full Text Available Summary: Cognitive abilities, such as volitional attention, operate under top-down, executive frontal cortical control of hierarchically lower structures. The circuit mechanisms underlying this process are unresolved. The claustrum possesses interconnectivity with many cortical areas and, thus, is hypothesized to orchestrate the cortical mantle for top-down control. Whether the claustrum receives top-down input and how this input may be processed by the claustrum have yet to be formally tested, however. We reveal that a rich anterior cingulate cortex (ACC input to the claustrum encodes a preparatory top-down information signal on a five-choice response assay that is necessary for optimal task performance. We further show that ACC input monosynaptically targets claustrum inhibitory interneurons and spiny glutamatergic projection neurons, the latter of which amplify ACC input in a manner that is powerfully constrained by claustrum inhibitory microcircuitry. These results demonstrate ACC input to the claustrum is critical for top-down control guiding action. : White et al. show that anterior cingulate cortex (ACC input to the claustrum encodes a top-down preparatory signal on a 5-choice response assay that is critical for task performance. Claustrum microcircuitry amplifies top-down ACC input in a frequency-dependent manner for eventual propagation to the cortex for cognitive control of action. Keywords: 5CSRTT, optogenetics, fiber photometry, microcircuit, attention, bottom-up, sensory cortices, motor cortices

  7. The increased use of radiation requires enhanced activities regarding radiation safety control

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Yun Jong; Lee, Jin Woo; Jeong, Gyo Seong [Korea Atomic Energy Research Institute, Jeongeup (Korea, Republic of)

    2015-05-15

    More recently, companies that have obtained permission to use radioactive materials or radiation device and registered radiation workers have increased by 10% and 4% respectively. The increased use of radiation could have an effect on radiation safety control. However, there is not nearly enough manpower and budget compared to the number of workers and facilities. This paper will suggest a counteroffer thought analyzing pending issues. The results of this paper indicate that there are 47 and 31.3 workers per radiation protection officer in educational and research institutes, respectively. There are 20.1 persons per RPO in hospitals, even though there are 2 RPOs appointed. Those with a special license as a radioisotope handler were ruled out as possible managers because medical doctors who have a special license for radioisotope handling normally have no experience with radiation safety. The number of staff members and budget have been insufficient for safety control at most educational and research institutes. It is necessary to build an optimized safety control system for effective Radiation Safety Control. This will reduce the risk factor of safety, and a few RPOs can be supplied for efficiency and convenience.

  8. Technical basis for high-level waste repository land control requirements for Palo Duro Basin, Paradox Basin, and Richton Dome

    International Nuclear Information System (INIS)

    Chen, C.P.; Raines, G.E.

    1987-02-01

    Three sites, the Palo Duro Basin in Texas, the Paradox Basin in Utah, and the Richton Dome in Mississippi, are being investigated by the US Department of Energy for high-level radioactive-waste disposal in mined, deep geologic repositories in salt. This report delineates the use of regulatory, engineering, and performance assessment information to establish the technical basis for controlled area requirements. Based on the size of the controlled area determined, plus that of the geologic repository operations area, recommendations of possible land control or ownership area requirements for each locale are provided. On a technical basis, the following minimum land control or ownership requirements are recommended, assuming repository operations area of 2240 ac (907 ha), or 3.5 mi 2 (9.1 km 2 ): Palo Duro Basin - 4060 ac (1643 ha), or 6.3 mi 2 (16.4 km 2 ); Paradox Basin - 4060 ac (1643 ha), or 6.3 mi 2 (16.4 km 2 ); and Richton Dome - 5000 ac (2024 ha), or 7.8 mi 2 (20.2 km 2 ). Of the factors used to determine the technically based recommendations, one was found to dominate each locale. For the Palo Duro and Paradox Basins, the dominant factor was the need to limit potential radionuclide release by ground-water flow to the accessible environment. For the Richton Dome, the dominant factor was the need to limit the potential effects of solution mining on dome and repository integrity

  9. Power Extension Package (PEP) system definition extension, orbital service module systems analysis study. Volume 7: PEP logistics and training plan requirements

    Science.gov (United States)

    1979-01-01

    Recommendations for logistics activities and logistics planning are presented based on the assumption that a system prime contractor will perform logistics functions to support all program hardware and will implement a logistics system to include the planning and provision of products and services to assure cost effective coverage of the following: maintainability; maintenance; spares and supply support; fuels; pressurants and fluids; operations and maintenance documentation training; preservation, packaging and packing; transportation and handling; storage; and logistics management information reporting. The training courses, manpower, materials, and training aids required will be identified and implemented in a training program.

  10. Minimum iron requirements of marine phytoplankton and the implications for the biogeochemical control of new production

    International Nuclear Information System (INIS)

    Brand, L.E.

    1991-01-01

    The Fe:PO 4 ratio at which nutrient limitation of final cell yield shifts from one nutrient to the other was determined for 22 species of marine phytoplankton. Among eucaryotic phytoplankton, coastal species have subsistence optimum Fe:P molar ratios of 10 -2 to 10 -3.1 , but most oceanic species have ratios of -4 , indicating that oceanic species have been able to adapt their biochemical composition to the low availability of Fe in the open ocean. In contrast, both coastal and oceanic species of cyanobacteria have relatively high Fe:P molar ratio requirements, ranging from 10 -1.4 to 10 -2.7 . A simple comparison of these requirement ratios with the ratios of the Fe and PO 4 fluxes to the photic zone from deep water and the atmosphere indicates that new production of cyanobacterial biomass is Fe limited, but new production of eucaryotic algal biomass is not. Because of the large differences among species in their Fe requirements, especially between procaryotes and eucaryotes, changes in the relative inputs of Fe and PO 4 to the photic zone are expected to lead to changes in the species composition of phytoplankton communities. Indeed, the ratio of atmospheric to deep-water inputs of nutrients and the resulting Fe:P input ratios appear to influence the relative abundance of unicellular cyanobacteria and Trichodesmium and their vertical and biogeographic distributions. Because some phytoplankton species have adaptations that reduce their dependence on combined N and Fe but not on P, it is concluded that PO 4 is the ultimate limiting nutrient of new production of organic C on a geochemical and evolutionary time scale, even though N and Fe are important growth rate-limiting nutrients on an ecological time scale

  11. Strong tobacco control program requirements and secure funding are not enough: lessons from Florida.

    Science.gov (United States)

    Kennedy, Allison; Sullivan, Sarah; Hendlin, Yogi; Barnes, Richard; Glantz, Stanton

    2012-05-01

    Florida's Tobacco Pilot Program (TPP; 1998-2003), with its edgy Truth media campaign, achieved unprecedented youth smoking reductions and became a model for tobacco control programming. In 2006, 3 years after the TPP was defunded, public health groups restored funding for tobacco control programming by convincing Florida voters to amend their constitution. Despite the new program's strong legal structure, Governor Charlie Crist's Department of Health implemented a low-impact program. Although they secured the program's strong structure and funding, Florida's nongovernmental public health organizations did not mobilize to demand a high-impact program. Implementation of Florida's Amendment 4 demonstrates that a strong programmatic structure and secure funding are insufficient to ensure a successful public health program, without external pressure from nongovernmental groups.

  12. Report of the Census Task Force on beamline control system requirements

    International Nuclear Information System (INIS)

    Barsotti, E.J.; Bartlett, J.F.; Bogert, V.D.; Borcherding, F.O.; Butler, J.; Czarapata, P.C.; Spalding, W.J.; Thomas, A.D.

    1986-01-01

    A special task force was appointed to study the experience with the present beamline control system at Fermilab and to make recommendations in this area. The charge of the committee and the list of its members are appended. In order to carry out its assignment, the committee conducted a series of meetings in which it discussed the controls situation in general and the best way to approach the user community. The various groups of users were identified, and a letter was written to representatives of these groups asking questions concerning the present system and future needs. The committee met with each group to discuss the response to these questions. Written summaries of the discussions are appended. Conclusions are drawn regarding current problems, systematic upgrades and specific recommendations

  13. Ebola: a holistic approach is required to achieve effective management and control.

    Science.gov (United States)

    Roca, Anna; Afolabi, Muhammed O; Saidu, Yauba; Kampmann, Beate

    2015-04-01

    The current Ebola outbreak in West Africa has already caused substantial mortality and dire human and economic consequences. It continues to represent an alarming public health threat in the region and beyond and jeopardizes the provision of health care and other services in the affected countries. The scale of the epidemic has accelerated research efforts for diagnostics, treatment, and prevention galvanized through increased availability of funding. Our knowledge relating to the virus, disease pathogenesis, risk factors, dynamics of transmission, and epidemic control is increasing, and sociocultural factors have emerged as critical determinants for the success and failure of control efforts. However, there is a long way to go. In this review we summarize the current knowledge, examine the sociocultural context in West Africa, and outline priority areas for future research. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

  14. The feasibility of a pragmatic randomised controlled trial to compare usual care with usual care plus individualised homeopathy, in children requiring secondary care for asthma.

    Science.gov (United States)

    Thompson, E A; Shaw, A; Nichol, J; Hollinghurst, S; Henderson, A J; Thompson, T; Sharp, D

    2011-07-01

    To test the feasibility of a pragmatic trial design with economic evaluation and nested qualitative study, comparing usual care (UC) with UC plus individualised homeopathy, in children requiring secondary care for asthma. This included recruitment and retention, acceptability of outcome measures patients' and health professionals' views and experiences and a power calculation for a definitive trial. In a pragmatic parallel group randomised controlled trial (RCT) design, children on step 2 or above of the British Thoracic Society Asthma Guidelines (BTG) were randomly allocated to UC or UC plus a five visit package of homeopathic care (HC). Outcome measures included the Juniper Asthma Control Questionnaire, Quality of Life Questionnaire and a resource use questionnaire. Qualitative interviews were used to gain families' and health professionals' views and experiences. 226 children were identified from hospital clinics and related patient databases. 67 showed an interest in participating, 39 children were randomised, 18 to HC and 21 to UC. Evidence in favour of adjunctive homeopathic treatment was lacking. Economic evaluation suggests that the cost of additional consultations was not offset by the reduced cost of homeopathic remedies and the lower use of primary care by children in the homeopathic group. Qualitative data gave insights into the differing perspectives of families and health care professionals within the research process. A future study using this design is not feasible, further investigation of a potential role for homeopathy in asthma management might be better conducted in primary care with children with less severe asthma. Copyright © 2011 The Faculty of Homeopathy. Published by Elsevier Ltd. All rights reserved.

  15. Pitch control margin at high angle of attack - Quantitative requirements (flight test correlation with simulation predictions)

    Science.gov (United States)

    Lackey, J.; Hadfield, C.

    1992-01-01

    Recent mishaps and incidents on Class IV aircraft have shown a need for establishing quantitative longitudinal high angle of attack (AOA) pitch control margin design guidelines for future aircraft. NASA Langley Research Center has conducted a series of simulation tests to define these design guidelines. Flight test results have confirmed the simulation studies in that pilot rating of high AOA nose-down recoveries were based on the short-term response interval in the forms of pitch acceleration and rate.

  16. Controlled initiation of chromosomal replication in Escherichia coli requires functional Hda protein.

    Science.gov (United States)

    Camara, Johanna Eltz; Skarstad, Kirsten; Crooke, Elliott

    2003-05-01

    Regulatory inactivation of DnaA helps ensure that the Escherichia coli chromosome is replicated only once per cell cycle, through accelerated hydrolysis of active replication initiator ATP-DnaA to inactive ADP-DnaA. Analysis of deltahda strains revealed that the regulatory inactivation of DnaA component Hda is necessary for maintaining controlled initiation but not for cell growth or viability.

  17. The Atomic Energy Control Board requirements for the radioisotope licensing of a radiopharmaceutical facility

    International Nuclear Information System (INIS)

    Kennedy, P.

    1980-01-01

    Items that must be addressed by an applicant for a radioisotope license in Canada are described. Site, design and operating conditions, safety assessment, organization, emergency procedures and operating policies and procedures must be described to the Atomic Energy Control Board (AECB), in support of any license application. All information submitted in support of the application is subject to AECB's policy on public access to that information. (OT)

  18. Modern requirements to quality assurance and control in nuclear fuel fabrication

    International Nuclear Information System (INIS)

    Weidinger, H.G.

    1999-01-01

    This lecture have shown a new type of quality assurance management has already successfully introduced in various industries and now starts to be used increasingly in the nuclear fuel industry. Static authority regulations and a tendency to bureaucratic understanding and handling of these regulations lead to a delayed start and a relatively slow progress of these quality strategies in the nuclear fuel technology. However, the economic pressure of strong competition and increasing demands of the utilities as the user of nuclear fuel result in a more determined introduction also to this area. The different use of statistical methods of two different fuel vendors are shown. Vendor A uses old fashioned methods. The focus is on the expensive final product control and few emphasis is on design of experiments and process control. Consequently, this vendor will have high costs, not only for QC and rejection but also for repair and replace actions after delivery. To the contrary, vendor B invests primarily in the design of experiments and process control. This vendor will profit only from lower direct costs but also from being at the front line of technical development and from enjoying a satisfied and happy customer. Many well examined quality management tools are available today which help not only to improve the quality but also decrease the costs. Still, the progress in using these techniques in nuclear fuel technology is limited and not comparable to the progress in other industries like automobile production or the electronic industry. (author)

  19. Full impact of laboratory information system requires direct use by clinical staff: cluster randomized controlled trial.

    Science.gov (United States)

    Blaya, Joaquín A; Shin, Sonya; Contreras, Carmen; Yale, Gloria; Suarez, Carmen; Asencios, Luis; Kim, Jihoon; Rodriguez, Pablo; Cegielski, Peter; Fraser, Hamish S F

    2011-01-01

    To evaluate the time to communicate laboratory results to health centers (HCs) between the e-Chasqui web-based information system and the pre-existing paper-based system. Cluster randomized controlled trial in 78 HCs in Peru. In the intervention group, 12 HCs had web access to results via e-Chasqui (point-of-care HCs) and forwarded results to 17 peripheral HCs. In the control group, 22 point-of-care HCs received paper results directly and forwarded them to 27 peripheral HCs. Baseline data were collected for 15 months. Post-randomization data were collected for at least 2 years. Comparisons were made between intervention and control groups, stratified by point-of-care versus peripheral HCs. For point-of-care HCs, the intervention group took less time to receive drug susceptibility tests (DSTs) (median 9 vs 16 days, p60 days to arrive (pChasqui information system had reduced communication times and fewer results with delays of >2 months. Peripheral HCs had no benefits from the system. This suggests that health establishments should have point-of-care access to reap the benefits of electronic laboratory reporting.

  20. Definition of the Nature and Hapten Threshold of the β-Lactam Antigen Required for T Cell Activation In Vitro and in Patients.

    Science.gov (United States)

    Meng, Xiaoli; Al-Attar, Zaid; Yaseen, Fiazia S; Jenkins, Rosalind; Earnshaw, Caroline; Whitaker, Paul; Peckham, Daniel; French, Neil S; Naisbitt, Dean J; Park, B Kevin

    2017-06-01

    Covalent modification of protein by drugs may disrupt self-tolerance, leading to lymphocyte activation. Until now, determination of the threshold required for this process has not been possible. Therefore, we performed quantitative mass spectrometric analyses to define the epitopes formed in tolerant and hypersensitive patients taking the β-lactam antibiotic piperacillin and the threshold required for T cell activation. A hydrolyzed piperacillin hapten was detected on four lysine residues of human serum albumin (HSA) isolated from tolerant patients. The level of modified Lys 541 ranged from 2.6 to 4.8%. Analysis of plasma from hypersensitive patients revealed the same pattern and levels of modification 1-10 d after the commencement of therapy. Piperacillin-responsive skin-homing CD4 + clones expressing an array of Vβ receptors were activated in a dose-, time-, and processing-dependent manner; analysis of incubation medium revealed that 2.6% of Lys 541 in HSA was modified when T cells were activated. Piperacillin-HSA conjugates that had levels and epitopes identical to those detected in patients were shown to selectively stimulate additional CD4 + clones, which expressed a more restricted Vβ repertoire. To conclude, the levels of piperacillin-HSA modification that activated T cells are equivalent to the ones formed in hypersensitive and tolerant patients, which indicates that threshold levels of drug Ag are formed in all patients. Thus, the propensity to develop hypersensitivity is dependent on other factors, such as the presence of T cells within an individual's repertoire that can be activated with the β-lactam hapten and/or an imbalance in immune regulation. Copyright © 2017 by The American Association of Immunologists, Inc.

  1. Cognitive requirements in the redesign of a TRIGA RC-1 control room: The role of the operators' evaluations

    International Nuclear Information System (INIS)

    Visciola, M.; Bagnara, S.; Ruggeri, R.

    1986-01-01

    When a control room undergoes to a redesign process it is of crucial importance to analyze how operators critically review it and which improvements they suggest. This is even more critical when presumably the same people will operate in the new 'redesigned' control room: Consistency in the mental models possessed by the operators of the plant functions and of their control should be emphasized. Consistency in the mental models can be assumed when redesign follows well-established guidelines drawn from experiences and studies carried out in very similar situations. However, this condition is not fulfilled when a nuclear research control room has to be redesigned, since available guidelines (e.g.; NUREG-0700) are based on studies conducted on nuclear power plant control rooms. These two types of facilities are of much difference as for activities performed in the control room, goals to be aimed at, costs and risks. As a consequence, the available guidelines cannot be safely applied to such a situation as the redesign of a TRIGA RC-1 control room. So, data have to be collected in order to allow the operators to efficiently and easily adapt to the new control room by consistently 'updating' their mental models. In the present study, these data have been collected through structured interviews, which consisted of a modified version of EPRI. The results can be summarized as follows: 1) The operators critically reviewed the present control room and underlined the lack of 'transparency' of the control system as for the plant's conditions and for the feedbacks about their own activities. 2) The operators' work analysis showed that they spend much of their time out of the control room. This means that, if the operators have to stay in the control room, they should be allowed to perform more and higher-level activities than those presently required, to prevent understimulation. So, the redesign should or allow and support the central control and maintenance, and other

  2. VSCE technology definition study

    Science.gov (United States)

    Howlett, R. A.; Hunt, R. B.

    1979-01-01

    Refined design definition of the variable stream control engine (VSCE) concept for advanced supersonic transports is presented. Operating and performance features of the VSCE are discussed, including the engine components, thrust specific fuel consumption, weight, noise, and emission system. A preliminary engine design is presented.

  3. 40 CFR 63.1586 - What are the emission points and control requirements for a non-industrial POTW treatment plant?

    Science.gov (United States)

    2010-07-01

    ... control requirements for a non-industrial POTW treatment plant? 63.1586 Section 63.1586 Protection of... Pollutants: Publicly Owned Treatment Works Non-Industrial Potw Treatment Plant Requirements § 63.1586 What are the emission points and control requirements for a non-industrial POTW treatment plant? There are...

  4. No control genes required: Bayesian analysis of qRT-PCR data.

    Directory of Open Access Journals (Sweden)

    Mikhail V Matz

    Full Text Available Model-based analysis of data from quantitative reverse-transcription PCR (qRT-PCR is potentially more powerful and versatile than traditional methods. Yet existing model-based approaches cannot properly deal with the higher sampling variances associated with low-abundant targets, nor do they provide a natural way to incorporate assumptions about the stability of control genes directly into the model-fitting process.In our method, raw qPCR data are represented as molecule counts, and described using generalized linear mixed models under Poisson-lognormal error. A Markov Chain Monte Carlo (MCMC algorithm is used to sample from the joint posterior distribution over all model parameters, thereby estimating the effects of all experimental factors on the expression of every gene. The Poisson-based model allows for the correct specification of the mean-variance relationship of the PCR amplification process, and can also glean information from instances of no amplification (zero counts. Our method is very flexible with respect to control genes: any prior knowledge about the expected degree of their stability can be directly incorporated into the model. Yet the method provides sensible answers without such assumptions, or even in the complete absence of control genes. We also present a natural Bayesian analogue of the "classic" analysis, which uses standard data pre-processing steps (logarithmic transformation and multi-gene normalization but estimates all gene expression changes jointly within a single model. The new methods are considerably more flexible and powerful than the standard delta-delta Ct analysis based on pairwise t-tests.Our methodology expands the applicability of the relative-quantification analysis protocol all the way to the lowest-abundance targets, and provides a novel opportunity to analyze qRT-PCR data without making any assumptions concerning target stability. These procedures have been implemented as the MCMC.qpcr package in R.

  5. No control genes required: Bayesian analysis of qRT-PCR data.

    Science.gov (United States)

    Matz, Mikhail V; Wright, Rachel M; Scott, James G

    2013-01-01

    Model-based analysis of data from quantitative reverse-transcription PCR (qRT-PCR) is potentially more powerful and versatile than traditional methods. Yet existing model-based approaches cannot properly deal with the higher sampling variances associated with low-abundant targets, nor do they provide a natural way to incorporate assumptions about the stability of control genes directly into the model-fitting process. In our method, raw qPCR data are represented as molecule counts, and described using generalized linear mixed models under Poisson-lognormal error. A Markov Chain Monte Carlo (MCMC) algorithm is used to sample from the joint posterior distribution over all model parameters, thereby estimating the effects of all experimental factors on the expression of every gene. The Poisson-based model allows for the correct specification of the mean-variance relationship of the PCR amplification process, and can also glean information from instances of no amplification (zero counts). Our method is very flexible with respect to control genes: any prior knowledge about the expected degree of their stability can be directly incorporated into the model. Yet the method provides sensible answers without such assumptions, or even in the complete absence of control genes. We also present a natural Bayesian analogue of the "classic" analysis, which uses standard data pre-processing steps (logarithmic transformation and multi-gene normalization) but estimates all gene expression changes jointly within a single model. The new methods are considerably more flexible and powerful than the standard delta-delta Ct analysis based on pairwise t-tests. Our methodology expands the applicability of the relative-quantification analysis protocol all the way to the lowest-abundance targets, and provides a novel opportunity to analyze qRT-PCR data without making any assumptions concerning target stability. These procedures have been implemented as the MCMC.qpcr package in R.

  6. Regulatory philosophy and requirements for radiation control in Canadian uranium mine-mill facilities

    International Nuclear Information System (INIS)

    Dory, A.B.

    1981-10-01

    With the point made that radiation exposure is one of the health hazards of uranium mining and accordingly has to be controlled, the Canadian regulatory philosophy is outlined as it pertains to the uranium mining industry. Two extremes in regulatory approach are examined, and the joint regulatory process is explained. Two examples of poor management performance are given, and the role of mine unions in the regulatory process is touched upon. The development of new regulations to cover ventilation and employee training is sketched briefly. The author concludes with a general expression of objectives for the eighties which include improved personal dosimetry

  7. Formulation of advanced consumables management models: Environmental control and electrical power system performance models requirements

    Science.gov (United States)

    Daly, J. K.; Torian, J. G.

    1979-01-01

    Software design specifications for developing environmental control and life support system (ECLSS) and electrical power system (EPS) programs into interactive computer programs are presented. Specifications for the ECLSS program are at the detail design level with respect to modification of an existing batch mode program. The FORTRAN environmental analysis routines (FEAR) are the subject batch mode program. The characteristics of the FEAR program are included for use in modifying batch mode programs to form interactive programs. The EPS program specifications are at the preliminary design level. Emphasis is on top-down structuring in the development of an interactive program.

  8. Renewable energy resources of the marine environment and its control requirements

    OpenAIRE

    García Moreno, Emilio; Correcher Salvador, Antonio; Quiles Cucarella, Eduardo; Morant Anglada, Francisco José

    2016-01-01

    [ES] En este artículo se presentan una serie de dispositivos generadores de energía renovable procedente del entorno marino, que en los últimos años han despertado creciente interés. En especial se describen los tipos principales de Generadores Eólicos Flotantes, las Turbinas de Corriente Marina y diversos dispositivos basados en Energía Undimotriz. Se destacan los principales requerimientos a considerar bajo el punto de vista de la ingeniería de control, considerando los objetivos d...

  9. Automated work packages architecture: An initial set of human factors and instrumentation and controls requirements

    Energy Technology Data Exchange (ETDEWEB)

    Agarwal, Vivek [Idaho National Lab. (INL), Idaho Falls, ID (United States); Oxstrand, Johanna H. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Le Blanc, Katya L. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-09-01

    The work management process in current fleets of national nuclear power plants is so highly dependent on large technical staffs and quality of work instruction, i.e., paper-based, that this puts nuclear energy at somewhat of a long-term economic disadvantage and increase the possibility of human errors. Technologies like mobile portable devices and computer-based procedures can play a key role in improving the plant work management process, thereby increasing productivity and decreasing cost. Automated work packages are a fundamentally an enabling technology for improving worker productivity and human performance in nuclear power plants work activities because virtually every plant work activity is accomplished using some form of a work package. As part of this year’s research effort, automated work packages architecture is identified and an initial set of requirements identified, that are essential and necessary for implementation of automated work packages in nuclear power plants.

  10. TA-55 facility control system upgrade project - human-system interface functional requirements

    International Nuclear Information System (INIS)

    Atkins, W.H.; Pope, N.G.; Turner, W.J.; Brown, R.E.

    1995-11-01

    The functional requirements for that part of the Technical Area (TA)-55 Operations Center Upgrade Project that involves the human-system interface (HSI) are described in this document. The upgrade project seeks to replace completely the center's existing computerized data acquisition and display system, which consists of the field multiplexer units, Data General computer systems, and associated peripherals and software. The upgrade project has two parts-the Facility Data Acquisition Interface System (FDAIS) and the HSI. The HSI comprises software and hardware to provide a high-level graphical operator interface to the data acquisition system, as well as data archiving, alarm annunciation, and logging. The new system will be built with modern, commercially available components; it will improve reliability and maintainability, and it can be expanded for future needs

  11. Interplay between requirements, software architecture, and hardware constraints in the development of a home control user interface

    DEFF Research Database (Denmark)

    Loft, M.S.; Nielsen, S.S.; Nørskov, Kim

    2012-01-01

    is to propose the hardware platform as a third Twin Peaks element that must be given attention in projects such as the one described in this paper. Specifically, we discuss how the presence of severe hardware constraints exacerbates making trade-offs between requirements and architecture.......We have developed a new graphical user interface for a home control device for a large industrial customer. In this industrial case study, we first present our approaches to requirements engineering and to software architecture; we also describe the given hardware platform. Then we make two...... contributions. Our first contribution is to provide a specific example of a real-world project in which a Twin Peaks-compliant approach to software development has been used, and to describe and discuss three examples of interplay between requirements and software architecture decisions. Our second contribution...

  12. Control, oversight and related terms in the international guidance on geological disposal of radioactive waste - Review of definitions and use

    International Nuclear Information System (INIS)

    2014-01-01

    This document presents the most complete analysis of the use of the words control, oversight, etc. as used in NEA, IAEA and ICRP literature connected to radioactive waste disposal. It reveals the many different ways the same word, 'control', has been used in international guidance and ambiguities than can arise, especially so for the post-closure phase of the repository. The newly introduced ICRP terminology, namely the use of the words 'oversight' and 'built-in controls', represents a step forward in terminology and resolves the ambiguity

  13. 40 CFR 51.1000 - Definitions.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 2 2010-07-01 2010-07-01 false Definitions. 51.1000 Section 51.1000 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS REQUIREMENTS FOR... Ambient Air Quality Standards § 51.1000 Definitions. The following definitions apply for purposes of this...

  14. 24 CFR 241.1005 - Definitions.

    Science.gov (United States)

    2010-04-01

    ... SUPPLEMENTARY FINANCING FOR INSURED PROJECT MORTGAGES Insurance for Equity Loans and Acquisition Loans-Eligibility Requirements § 241.1005 Definitions. (a) All of the definitions of § 241.1 apply to equity and... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Definitions. 241.1005 Section 241...

  15. Integrated Application of Active Controls (IAAC) technology to an advanced subsonic transport project: Current and advanced act control system definition study. Volume 2: Appendices

    Science.gov (United States)

    Hanks, G. W.; Shomber, H. A.; Dethman, H. A.; Gratzer, L. B.; Maeshiro, A.; Gangsaas, D.; Blight, J. D.; Buchan, S. M.; Crumb, C. B.; Dorwart, R. J.

    1981-01-01

    The current status of the Active Controls Technology (ACT) for the advanced subsonic transport project is investigated through analysis of the systems technical data. Control systems technologies under examination include computerized reliability analysis, pitch axis fly by wire actuator, flaperon actuation system design trade study, control law synthesis and analysis, flutter mode control and gust load alleviation analysis, and implementation of alternative ACT systems. Extensive analysis of the computer techniques involved in each system is included.

  16. Integrated security system definition

    International Nuclear Information System (INIS)

    Campbell, G.K.; Hall, J.R. II

    1985-01-01

    The objectives of an integrated security system are to detect intruders and unauthorized activities with a high degree of reliability and the to deter and delay them until effective response/engagement can be accomplished. Definition of an effective integrated security system requires proper application of a system engineering methodology. This paper summarizes a methodology and describes its application to the problem of integrated security system definition. This process includes requirements identification and analysis, allocation of identified system requirements to the subsystem level and provides a basis for identification of synergistic subsystem elements and for synthesis into an integrated system. The paper discusses how this is accomplished, emphasizing at each step how system integration and subsystem synergism is considered. The paper concludes with the product of the process: implementation of an integrated security system

  17. Marine Diesel Engine Control to meet Emission Requirements and Maintain Maneuverability

    DEFF Research Database (Denmark)

    Nielsen, Kræn Vodder; Blanke, Mogens; Eriksson, Lars

    2018-01-01

    International shipping has been reported to account for 13% of global NOx emissions and 2.1% of global green house gas emissions. Recent restrictions of NOx emissions from marine vessels have led to the development of exhaust gas recirculation (EGR) for large two-stroke diesel engines. Meanwhile......, the same engines have been downsized and derated to optimize fuel efficiency. The smaller engines reduce the possible vessel acceleration, and to counteract this, the engine controller must be improved to fully utilize the physical potential of the engine. A fuel index limiter based on air/fuel ratio...... was recently developed [1], but as it does not account for EGR, accelerations lead to excessive exhaust smoke formation which could damage the engine when recirculated. This paper presents two methods for extending a fuel index limiter function to EGR engines. The methods are validated through simulations...

  18. Requirements for controlling a repository's releases of carbon-14 dioxide; the high costs and negligible benefits

    International Nuclear Information System (INIS)

    Park, U Sun; Pflum, C.G.

    1990-01-01

    A repository excavated within the unsaturated zone may release carbon (C)-14 dioxide in amounts that exceed limits imposed by the Environmental Protection Agency (EPA) and the Nuclear Regulatory Commission (NRC). The release would not threaten the general population, but may expose some hypothetical maximally exposed individual to 0.0005 millirems/year. Yet a repository's releases of C-14 dioxide are strictly regulated, perhaps unintentionally. The EPA and NRC regulations could force the Department of Energy to design and fabricate an expensive 10,000-year waste package solely for the sake of controlling releases of C-14 dioxide. This paper argues that the repository regulations should exempt releases of C-14 dioxide or at least impose more equitable limits. 21 refs., 1 tab

  19. Functional requirements for an intelligent RPC. [remote power controller for spaceborne electrical distribution system

    Science.gov (United States)

    Aucoin, B. M.; Heller, R. P.

    1990-01-01

    An intelligent remote power controller (RPC) based on microcomputer technology can implement advanced functions for the accurate and secure detection of all types of faults on a spaceborne electrical distribution system. The intelligent RPC will implement conventional protection functions such as overcurrent, under-voltage, and ground fault protection. Advanced functions for the detection of soft faults, which cannot presently be detected, can also be implemented. Adaptive overcurrent protection changes overcurrent settings based on connected load. Incipient and high-impedance fault detection provides early detection of arcing conditions to prevent fires, and to clear and reconfigure circuits before soft faults progress to a hard-fault condition. Power electronics techniques can be used to implement fault current limiting to prevent voltage dips during hard faults. It is concluded that these techniques will enhance the overall safety and reliability of the distribution system.

  20. Impacts and Compliance Implementation Plans and Required Deviations for Toxic Substance Control Act (TSCA) Regulation of Double Shell Tanks (DST)

    International Nuclear Information System (INIS)

    MULKEY, C.H.

    2000-01-01

    In May 2000, the U.S. Department of Energy, Office of River Protection (DOE-ORP) and the U.S. Environmental Protection Agency (EPA) held meetings regarding the management of polychlorinated biphenyls (PCBs) in the Hanford tank waste. It was decided that the radioactive waste currently stored in the double-shell tanks (DSTs) contain waste which will become subject to the Toxic Substance Control Act (TSCA) (40 CFR 761). As a result, DOE-ORP directed the River Protection Project tank farm contractor (TFC) to prepare plans for managing the PCB inventory in the DSTs. Two components of the PCB management plans are this assessment of the operational impacts of TSCA regulation and the identifications of deviations from TSCA that are required to accommodate tank farm unique limitations. This plan provides ORP and CH2M HILL Hanford Group, Inc. (CHG) with an outline of TSCA PCB requirements and their applicability to tank farm activities, and recommends a compliance/implementation approach. Where strict compliance is not possible, the need for deviations from TSCA PCB requirements is identified. The purpose of assembling this information is to enhance the understanding of PCB management requirements, identify operational impacts and select impact mitigation strategies. This information should be useful in developing formal agreements with EPA where required

  1. The first 62 AGNs observed with SDSS-IV MaNGA - I. Their characterization and definition of a control sample

    Science.gov (United States)

    Rembold, Sandro B.; Shimoia, Jáderson S.; Storchi-Bergmann, Thaisa; Riffel, Rogério; Riffel, Rogemar A.; Mallmann, Nícolas D.; do Nascimento, Janaína C.; Moreira, Thales N.; Ilha, Gabriele S.; Machado, Alice D.; Cirolini, Rafael; da Costa, Luiz N.; Maia, Marcio A. G.; Santiago, Basílio X.; Schneider, Donald P.; Wylezalek, Dominika; Bizyaev, Dmitry; Pan, Kaike; Müller-Sánchez, Francisco

    2017-12-01

    We report the characterization of the first 62 Mapping Nearby Galaxies at the Apache Point Observatory active galactic nuclei (AGNs) hosts and the definition of a control sample of non-active galaxies. This control sample was selected in order to match the AGN hosts in terms of stellar mass, redshift, visual morphology and inclination. The stellar masses are in the range 9.4control sample galaxies are dominated by the oldest (≥ 4 Gyr) component, with a small contribution of intermediate age and young stars (<940 Myr). Examining the relationship between the stellar population properties and L([O III]}), we find that with increasing L([O III]), the AGN exhibit a decreasing contribution from the oldest stellar population relative to control galaxies and an increasing contribution from the younger components (∼40 Myr). We also find a correlation of the mean age differences (AGN-control) with L([O III]), in the sense that more luminous AGNs are younger than the control objects, while the low-luminosity AGNs are older. These results support a connection between the growth of the galaxy bulge via formation of new stars and the growth of the Supermassive Black Hole via accretion in the AGN phase.

  2. Analysis of Heat Stress and the Indoor Climate Control Requirements for Movable Refuge Chambers.

    Science.gov (United States)

    Hao, Xiaoli; Guo, Chenxin; Lin, Yaolin; Wang, Haiqiao; Liu, Heqing

    2016-05-20

    Movable refuge chambers are a new kind of rescue device for underground mining, which is believed to have a potential positive impact on reducing the rate of fatalities. It is likely to be hot and humid inside a movable refuge chamber due to the metabolism of trapped miners, heat generated by equipment and heat transferred from outside. To investigate the heat stress experienced by miners trapped in a movable refuge chamber, the predicted heat strain (PHS) model was used to simulate the heat transfer process between the person and the thermal environment. The variations of heat stress with the temperature and humidity inside the refuge chamber were analyzed. The effects of air temperature outside the refuge chamber and the overall heat transfer coefficient of the refuge chamber shell on the heat stress inside the refuge chamber was also investigated. The relationship between the limit of exposure duration and the air temperature and humidity was numerically analyzed to determine the upper limits of temperature and humidity inside a refuge chamber. Air temperature of 32 °C and relative humidity of 70% are recommended as the design standard for internal thermal environment control of movable refuge chambers.

  3. Analysis of Heat Stress and the Indoor Climate Control Requirements for Movable Refuge Chambers

    Directory of Open Access Journals (Sweden)

    Xiaoli Hao

    2016-05-01

    Full Text Available Movable refuge chambers are a new kind of rescue device for underground mining, which is believed to have a potential positive impact on reducing the rate of fatalities. It is likely to be hot and humid inside a movable refuge chamber due to the metabolism of trapped miners, heat generated by equipment and heat transferred from outside. To investigate the heat stress experienced by miners trapped in a movable refuge chamber, the predicted heat strain (PHS model was used to simulate the heat transfer process between the person and the thermal environment. The variations of heat stress with the temperature and humidity inside the refuge chamber were analyzed. The effects of air temperature outside the refuge chamber and the overall heat transfer coefficient of the refuge chamber shell on the heat stress inside the refuge chamber was also investigated. The relationship between the limit of exposure duration and the air temperature and humidity was numerically analyzed to determine the upper limits of temperature and humidity inside a refuge chamber. Air temperature of 32 °C and relative humidity of 70% are recommended as the design standard for internal thermal environment control of movable refuge chambers.

  4. PAF-Myc-Controlled Cell Stemness Is Required for Intestinal Regeneration and Tumorigenesis.

    Science.gov (United States)

    Kim, Moon Jong; Xia, Bo; Suh, Han Na; Lee, Sung Ho; Jun, Sohee; Lien, Esther M; Zhang, Jie; Chen, Kaifu; Park, Jae-Il

    2018-03-12

    The underlying mechanisms of how self-renewing cells are controlled in regenerating tissues and cancer remain ambiguous. PCNA-associated factor (PAF) modulates DNA repair via PCNA. Also, PAF hyperactivates Wnt/β-catenin signaling independently of PCNA interaction. We found that PAF is expressed in intestinal stem and progenitor cells (ISCs and IPCs) and markedly upregulated during intestinal regeneration and tumorigenesis. Whereas PAF is dispensable for intestinal homeostasis, upon radiation injury, genetic ablation of PAF impairs intestinal regeneration along with the severe loss of ISCs and Myc expression. Mechanistically, PAF conditionally occupies and transactivates the c-Myc promoter, which induces the expansion of ISCs/IPCs during intestinal regeneration. In mouse models, PAF knockout inhibits Apc inactivation-driven intestinal tumorigenesis with reduced tumor cell stemness and suppressed Wnt/β-catenin signaling activity, supported by transcriptome profiling. Collectively, our results unveil that the PAF-Myc signaling axis is indispensable for intestinal regeneration and tumorigenesis by positively regulating self-renewing cells. Copyright © 2018 Elsevier Inc. All rights reserved.

  5. Quality Control and Peer Review of Data Sets: Mapping Data Archiving Processes to Data Publication Requirements

    Science.gov (United States)

    Mayernik, M. S.; Daniels, M.; Eaker, C.; Strand, G.; Williams, S. F.; Worley, S. J.

    2012-12-01

    ? What data set review can be done pre-publication, and what must be done post-publication? What components of the data sets review processes can be automated, and what components will always require human expertise and evaluation?

  6. High-definition infrared thermography of ice nucleation and propagation in wheat under natural frost conditions and controlled freezing

    Science.gov (United States)

    Infrared thermography has been used to visualize the freezing process in plants and has greatly enhanced our knowledge of ice nucleation and propagation in plants. The majority of IR analyses have been conducted under controlled rather than natural conditions and often on plant parts instead of wh...

  7. 21 CFR 1300.04 - Definitions relating to the dispensing of controlled substances by means of the Internet.

    Science.gov (United States)

    2010-04-01

    ... controlled substances by means of the Internet. 1300.04 Section 1300.04 Food and Drugs DRUG ENFORCEMENT... substances by means of the Internet. (a) Any term not defined in this part or elsewhere in this chapter shall... evaluation of the patient. (c) The term deliver, distribute, or dispense by means of the Internet refers...

  8. Positive predictive value of a case definition for diabetes mellitus using automated administrative health data in children and youth exposed to antipsychotic drugs or control medications: a Tennessee Medicaid study

    Directory of Open Access Journals (Sweden)

    Bobo William V

    2012-08-01

    Full Text Available Abstract Background We developed and validated an automated database case definition for diabetes in children and youth to facilitate pharmacoepidemiologic investigations of medications and the risk of diabetes. Methods The present study was part of an in-progress retrospective cohort study of antipsychotics and diabetes in Tennessee Medicaid enrollees aged 6–24 years. Diabetes was identified from diabetes-related medical care encounters: hospitalizations, outpatient visits, and filled prescriptions. The definition required either a primary inpatient diagnosis or at least two other encounters of different types, most commonly an outpatient diagnosis with a prescription. Type 1 diabetes was defined by insulin prescriptions with at most one oral hypoglycemic prescription; other cases were considered type 2 diabetes. The definition was validated for cohort members in the 15 county region geographically proximate to the investigators. Medical records were reviewed and adjudicated for cases that met the automated database definition as well as for a sample of persons with other diabetes-related medical care encounters. Results The study included 64 cases that met the automated database definition. Records were adjudicated for 46 (71.9%, of which 41 (89.1% met clinical criteria for newly diagnosed diabetes. The positive predictive value for type 1 diabetes was 80.0%. For type 2 and unspecified diabetes combined, the positive predictive value was 83.9%. The estimated sensitivity of the definition, based on adjudication for a sample of 30 cases not meeting the automated database definition, was 64.8%. Conclusion These results suggest that the automated database case definition for diabetes may be useful for pharmacoepidemiologic studies of medications and diabetes.

  9. Positive predictive value of a case definition for diabetes mellitus using automated administrative health data in children and youth exposed to antipsychotic drugs or control medications: a Tennessee Medicaid study.

    Science.gov (United States)

    Bobo, William V; Cooper, William O; Stein, C Michael; Olfson, Mark; Mounsey, Jackie; Daugherty, James; Ray, Wayne A

    2012-08-24

    We developed and validated an automated database case definition for diabetes in children and youth to facilitate pharmacoepidemiologic investigations of medications and the risk of diabetes. The present study was part of an in-progress retrospective cohort study of antipsychotics and diabetes in Tennessee Medicaid enrollees aged 6-24 years. Diabetes was identified from diabetes-related medical care encounters: hospitalizations, outpatient visits, and filled prescriptions. The definition required either a primary inpatient diagnosis or at least two other encounters of different types, most commonly an outpatient diagnosis with a prescription. Type 1 diabetes was defined by insulin prescriptions with at most one oral hypoglycemic prescription; other cases were considered type 2 diabetes. The definition was validated for cohort members in the 15 county region geographically proximate to the investigators. Medical records were reviewed and adjudicated for cases that met the automated database definition as well as for a sample of persons with other diabetes-related medical care encounters. The study included 64 cases that met the automated database definition. Records were adjudicated for 46 (71.9%), of which 41 (89.1%) met clinical criteria for newly diagnosed diabetes. The positive predictive value for type 1 diabetes was 80.0%. For type 2 and unspecified diabetes combined, the positive predictive value was 83.9%. The estimated sensitivity of the definition, based on adjudication for a sample of 30 cases not meeting the automated database definition, was 64.8%. These results suggest that the automated database case definition for diabetes may be useful for pharmacoepidemiologic studies of medications and diabetes.

  10. Positive predictive value of a case definition for diabetes mellitus using automated administrative health data in children and youth exposed to antipsychotic drugs or control medications: a Tennessee Medicaid study

    Science.gov (United States)

    2012-01-01

    Background We developed and validated an automated database case definition for diabetes in children and youth to facilitate pharmacoepidemiologic investigations of medications and the risk of diabetes. Methods The present study was part of an in-progress retrospective cohort study of antipsychotics and diabetes in Tennessee Medicaid enrollees aged 6–24 years. Diabetes was identified from diabetes-related medical care encounters: hospitalizations, outpatient visits, and filled prescriptions. The definition required either a primary inpatient diagnosis or at least two other encounters of different types, most commonly an outpatient diagnosis with a prescription. Type 1 diabetes was defined by insulin prescriptions with at most one oral hypoglycemic prescription; other cases were considered type 2 diabetes. The definition was validated for cohort members in the 15 county region geographically proximate to the investigators. Medical records were reviewed and adjudicated for cases that met the automated database definition as well as for a sample of persons with other diabetes-related medical care encounters. Results The study included 64 cases that met the automated database definition. Records were adjudicated for 46 (71.9%), of which 41 (89.1%) met clinical criteria for newly diagnosed diabetes. The positive predictive value for type 1 diabetes was 80.0%. For type 2 and unspecified diabetes combined, the positive predictive value was 83.9%. The estimated sensitivity of the definition, based on adjudication for a sample of 30 cases not meeting the automated database definition, was 64.8%. Conclusion These results suggest that the automated database case definition for diabetes may be useful for pharmacoepidemiologic studies of medications and diabetes. PMID:22920280

  11. HIV Salvage Therapy Does Not Require Nucleoside Reverse Transcriptase Inhibitors: A Randomized, Controlled Trial.

    Science.gov (United States)

    Tashima, Karen T; Smeaton, Laura M; Fichtenbaum, Carl J; Andrade, Adriana; Eron, Joseph J; Gandhi, Rajesh T; Johnson, Victoria A; Klingman, Karin L; Ritz, Justin; Hodder, Sally; Santana, Jorge L; Wilkin, Timothy; Haubrich, Richard H

    2015-12-15

    Nucleoside reverse transcriptase inhibitors (NRTIs) are often included in antiretroviral regimens in treatment-experienced patients in the absence of data from randomized trials. To compare treatment success between participants who omit versus those who add NRTIs to an optimized antiretroviral regimen of 3 or more agents. Multicenter, randomized, controlled trial. (ClinicalTrials.gov: NCT00537394). Outpatient HIV clinics. Treatment-experienced patients with HIV infection and viral resistance. Open-label optimized regimens (not including NRTIs) were selected on the basis of treatment history and susceptibility testing. Participants were randomly assigned to omit or add NRTIs. The primary efficacy outcome was regimen failure through 48 weeks using a noninferiority margin of 15%. The primary safety outcome was time to initial episode of a severe sign, symptom, or laboratory abnormality before discontinuation of NRTI assignment. 360 participants were randomly assigned, and 93% completed a 48-week visit. The cumulative probability of regimen failure was 29.8% in the omit-NRTIs group versus 25.9% in the add-NRTIs group (difference, 3.2 percentage points [95% CI, -6.1 to 12.5 percentage points]). No significant between-group differences were found in the primary safety end points or the proportion of participants with HIV RNA level less than 50 copies/mL. No deaths occurred in the omit-NRTIs group compared with 7 deaths in the add-NRTIs group. Unblinded study design, and the study may not be applicable to resource-poor settings. Treatment-experienced patients with HIV infection starting a new optimized regimen can safely omit NRTIs without compromising virologic efficacy. Omitting NRTIs will reduce pill burden, cost, and toxicity in this patient population. National Institute of Allergy and Infectious Diseases, Boehringer Ingelheim, Janssen, Merck, ViiV Healthcare, Roche, and Monogram Biosciences (LabCorp).

  12. Conventional approaches for assessment of caving behaviour and support requirement with regard to strata control experiences in longwall workings

    Directory of Open Access Journals (Sweden)

    G.S.P. Singh

    2015-06-01

    Full Text Available Effective control of roof strata is very important for trouble free operation and regular face advance in mechanised longwall workings. It is now technically possible to exploit coal seams in difficult geo-mining conditions with the help of newer innovations in longwall face machineries. A reliable assessment of caving behaviour and support capacity requirement helps in selecting supports of adequate capacity and making operational preparedness for timely and confident solution of impending problems. This paper reviews the mechanism of roof caving and the conventional approaches of caving behaviour and support requirement in the context of major strata control experiences gained worldwide. The review shows that a number of approaches are being used for advance prediction of caving behaviour and support capacity requirement in a variety of geo-mining conditions. The theoretical explanation of the mechanism of roof caving and the design function of roof supports have been worked out through staged development of approaches, their evaluation followed by their gradual modification and enrichment of synthesized findings. This process is still continuing with consistently improved understanding through growing field experiences in the larger domain of geo-mining conditions and state-of-art strata analysis and monitoring techniques. These attempts have contributed significantly to improving the level of understanding and reducing the gap of uncertainty in planning and design of longwall operation in a given geo-mining condition.

  13. Efficient Use of Automatic Exposure Control Systems in Computed Tomography Requires Correct Patient Positioning

    Energy Technology Data Exchange (ETDEWEB)

    Gudjonsdottir, J.; Jonsdottir, B. (Roentgen Domus Medica, Reykjavik (Iceland)); Svensson, J.R.; Campling, S. (Faculty of Health and Social Care, Anglia Ruskin Univ., Cambridge (United Kingdom)); Brennan, P.C. (Diagnostic Imaging, Biological Imaging Research, UCD School of Medicine and Medical Science, Univ. College Dublin, Belfield, Dublin (Ireland))

    2009-11-15

    Background: Image quality and radiation dose to the patient are important factors in computed tomography (CT). To provide constant image quality, tube current modulation (TCM) performed by automatic exposure control (AEC) adjusts the tube current to the patient's size and shape. Purpose: To evaluate the effects of patient centering on tube current-time product (mAs) and image noise. Material and Methods: An oval-shaped acrylic phantom was scanned in various off-center positions, at 30-mm intervals within a 500-mm field of view, using three different CT scanners. Acquisition parameters were similar to routine abdomen examinations at each site. The mAs was recorded and noise measured in the images. The correlation of mAs and noise with position was calculated using Pearson correlation. Results: In all three scanners, the mAs delivered by the AEC changed with y-position of the phantom (P<0.001), with correlation values of 0.98 for scanners A and B and -0.98 for scanner C. With x-position, mAs changes were 4.9% or less. As the phantom moved into the y-positions, compared with the iso-center, the mAs varied by up to +70%, -34%, and +56% in scanners A, B, and C, respectively. For scanners A and B, noise in two regions of interest in the lower part of the phantom decreased with elevation, with correlation factors from -0.95 to -0.86 (P<0.02). In the x-direction, significant noise relationships (P<0.005) were only seen in scanner A. Conclusion: This study demonstrates that patient centering markedly affects the efficacy of AEC function and that tube current changes vary between scanners. Tube position when acquiring the scout projection radiograph is decisive for the direction of the mAs change. Off-center patient positions cause errors in tube current modulation that can outweigh the dose reduction gained by AEC use, and image quality is affected

  14. 47 CFR 101.1112 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Definitions. 101.1112 Section 101.1112... SERVICES Competitive Bidding Procedures for LMDS § 101.1112 Definitions. (a) Scope. The definitions in this... million. (d) Entrepreneur. An entrepreneur is an entity that, together with its affiliates and controlling...

  15. 21 CFR 516.13 - Definitions.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Definitions. 516.13 Section 516.13 Food and Drugs... Minor Species New Animal Drug § 516.13 Definitions. The following definitions of terms apply only in the... treatment, control or prevention of a disease or condition, or the intention to affect the structure or...

  16. Feed tank transfer requirements

    International Nuclear Information System (INIS)

    Freeman-Pollard, J.R.

    1998-01-01

    This document presents a definition of tank turnover. Also, DOE and PC responsibilities; TWRS DST permitting requirements; TWRS Authorization Basis (AB) requirements; TWRS AP Tank Farm operational requirements; unreviewed safety question (USQ) requirements are presented for two cases (i.e., tank modifications occurring before tank turnover and tank modification occurring after tank turnover). Finally, records and reporting requirements, and documentation which will require revision in support of transferring a DST in AP Tank Farm to a privatization contractor are presented

  17. Feed tank transfer requirements

    Energy Technology Data Exchange (ETDEWEB)

    Freeman-Pollard, J.R.

    1998-09-16

    This document presents a definition of tank turnover. Also, DOE and PC responsibilities; TWRS DST permitting requirements; TWRS Authorization Basis (AB) requirements; TWRS AP Tank Farm operational requirements; unreviewed safety question (USQ) requirements are presented for two cases (i.e., tank modifications occurring before tank turnover and tank modification occurring after tank turnover). Finally, records and reporting requirements, and documentation which will require revision in support of transferring a DST in AP Tank Farm to a privatization contractor are presented.

  18. INTERNAL CONTROL AND AUDIT OF ENTERPRISES’ COMPLIANCE WITH CUSTOMS REQUIREMENTS WHILE CON-DUCTING FOREIGN ECONOMIC ACTIVITY

    Directory of Open Access Journals (Sweden)

    Olena Vakulchyk

    2017-09-01

    Full Text Available Evaluation of the reliability of enterprises engaged in the foreign economic activity and simplifying of Customs procedures have become a relevant issue in the context of globalization. The capabilities and preferences of the “Authorized Economic Operator” status are the cause of a new challenge for managers of enterprises – creation of an internal control system to ensure a systematic monitoring of the conditions of Customs compliance standards of reliability and safety, which would allow identifying risks of loss of the “Authorized Economic Operator” status. The purpose of the scientific paper is to improve the internal control system of an enterprise engaged in foreign economic activity in the process of obtaining and saving the “Authorized Economic Operator” status in accordance with the international Custom requirements for safety and reliability. Methodology. The research is based on the methods of logical and analytical modelling of the impact assessment of individual factors on the value of the generalization indicator. The results are tested on the internal accounting data of the existing machine-building enterprises. Results. The paper shows the results of adapting the concept of COSO to the system of internal control of the foreign economic activity of the enterprise in the process of obtaining or retaining the “Authorized Economic Operator” status. The internal control system within the concept of COSO should ensure the achievement of the objectives – operations, reporting, and compliance. The criteria for estimating the objective “compliance” for an enterprise engaged in foreign economic activity can be an integral indicator of compliance. Value/originality. It is suggested to perform internal control of an enterprise’s compliance with Customs requirements based on the analysis of deviations of the compliance integral indicator. Practical implications. The result of control is to perform a steady in

  19. The impact of instrumentation and control requirements on the design changes of the Westinghouse ''NSSS'' of Almaraz, Lemoniz and Asco

    International Nuclear Information System (INIS)

    Gerini, P.M.; Naredo, F.P.; Williams, D.W.

    1978-01-01

    For the nuclear power plants Almaraz, Lemoniz and Asco the NSSS set is supplied by Westinghouse. Purchasing contracts were signed in 1971 and projects design took into account the compliance with the regulatory requirements for licensing, issued and standing that time. Since 1971 licensing regulations have been subjected to a deep revision due to the issue of new standards and guides and revision of other affecting altogether the engineering design of nuclear power plants. This situation was reasonably reflected on several consecutive design revisions for the case of the Almaraz, Lemoniz and Asco Nuclear plants. This impact, from the viewpoint of the instrumentation and control context, and referred to the NSSS is analyzed in the report. In particular, attention is paid to the safeguards actuation logic, testing capability and physical separation criteria as contemplated into the regulatory requirements starting from 1971.(J.E.de C)

  20. Conceptual design of a system for nuclear material control in a research centre according to the IAEA safeguards requirements

    International Nuclear Information System (INIS)

    Bueker, H.; Kotte, U.; Stein, G.

    1976-01-01

    In comparison with other facilities handling nuclear material, a nuclear research centre is characterized by a wider spectrum of operations. This requires a number of installations within the centre such as research reactors, critical assemblies, research institutes and central departments, operating, in general, independently of each other. Nuclear material is stored and processed in small quantities and in different chemical and physical configurations within prescribed license areas. The conceptual design of a new system for nuclear material control in a research centre has to consider the operator's and IAEA's safeguards requirements. Using the example of the Juelich Nuclear Research Centre in the Federal Republic of Germany, these requirements are being examined in conjunction with the specified peculiarities of a nuclear research centre. Following this, a division of the research centre into material balance areas and key measurement points is being proposed, based on the existing facilities and licence areas. The essential characteristic of the concept is a far-reaching displayability of the inventory and flow of nuclear material. The availability of information is based on differentiated material accountancy in conjunction with adequate measurement of nuclear material data. For data processing and generation of data, a computerized record and report system is to be provided as well as a central measurement system. The design of an integrated accountancy system with a central computer and remote terminals is described; various measuring appliances, now being developed or tested, for the non-destructive assay of nuclear material are specified. The functions of a central department for nuclear material management for operating these systems are discussed and the planned verification of nuclear material in the different material balance areas illustrated. On applying the measures described in this paper, the conceptual design of a system for nuclear material

  1. Successful control of intractable nausea and vomiting requiring combined ondansetron and haloperidol in a patient with advanced cancer.

    Science.gov (United States)

    Cole, R M; Robinson, F; Harvey, L; Trethowan, K; Murdoch, V

    1994-01-01

    Chemically induced nausea and vomiting is a common symptom of advanced cancer effected through stimulation of dopamine (D2) or serotonin (5-HT3) receptors located in the chemoreceptor trigger zone (CTZ). These may be blocked by therapeutic doses of haloperidol and ondansetron, respectively. This case, reporting on a single patient acting as her own control, establishes that combined blockade of these receptors is sometimes required to relieve intractable nausea and vomiting. It also demonstrates the value of clinical review, audit of care, and quality assurance in the palliative care setting.

  2. Radiological and administrative criteria and procedures required by the Radiation Protection Ordinance for exemption from regulatory control

    International Nuclear Information System (INIS)

    Birkholz, W.

    2000-01-01

    The system of required radioactivity measurements and limits as well as methods, based on the 10 μSv concept, constitutes the regulatory regime for exemption of radioactive waste materials from regulatory control according to atomic energy law. The methods and administrative procedures are suitable both for smaller amounts of materials, such as those resulting from the use of radioactive substances in scientific research and medical applications, and for the large waste volumes emanating from the dismantling of nuclear installations. The system provided for in the Radiation Protection Ordinance ensures harmonized administrative action of all public authorities involved. (orig./CB) [de

  3. Power requirements for electron cyclotron current drive and ion cyclotron resonance heating for sawtooth control in ITER

    Science.gov (United States)

    Chapman, I. T.; Graves, J. P.; Sauter, O.; Zucca, C.; Asunta, O.; Buttery, R. J.; Coda, S.; Goodman, T.; Igochine, V.; Johnson, T.; Jucker, M.; La Haye, R. J.; Lennholm, M.; Contributors, JET-EFDA

    2013-06-01

    gain. The power requirements for the necessary degree of sawtooth control using either destabilization or stabilization schemes are expected to be within the specification of anticipated ICRH and ECRH heating in ITER, provided the requisite power can be dedicated to sawtooth control.

  4. Value of Adjusted Blood Requirement Index in determining failure to control bleed in patients with variceal bleeding.

    Science.gov (United States)

    Abid, Shahab; Khalid, Abdullah B; Awan, Safia; Shah, Hasnain A; Hamid, Saeed; Jafri, Wasim

    2015-03-01

    Variceal bleeding is a serious complication in patients with cirrhosis. Among the criteria that were proposed in Baveno conferences, the Adjusted Blood Requirement Index (ABRI) has not been validated prospectively in clinical practice. We therefore aim to evaluate the measurement of ABRI as a marker of failure to control bleeding and to evaluate the consistency of ABRI in relation to other criteria of failure to control variceal bleeding. All patients with variceal bleeding who presented to Aga Khan University Hospital from January 2010 to December 2012 who were administered transfusion of packed red blood cells were included after obtaining informed consent. All patients were managed as per the standard protocol with intravenous terlipressin along with band ligation and injection of cyanoacrylate in cases of esophageal and fundal varices, respectively. Hemoglobin and hematocrit were measured every 6 h for 48 h and then every 12 h until 5 days of index bleed in each patient. Packed cells were transfused if hemoglobin decreased below 8 g/dl. The number of blood units transfused, change in hemoglobin values, and ABRI were calculated after each unit of blood transfusion till 120 h. In patients in whom bleed could not be controlled, an ABRI value of 0.75 or more was compared with other Baveno IV-based parameters that define failure to control variceal bleeding. During the study period, 137 eligible patients with variceal bleed were admitted. The mean age of the patients was 52±12 years. The majority of patients (50.4%) were in Child-Pugh class B, followed by 38% in Child-Pugh class C. According to the Baveno IV criteria, overall failure to control acute variceal bleeding occurred in 52 (37.9%) patients. Excluding ABRI, failure to control bleeding was found in 22/137 (16%) patients, whereas ABRI-based criteria showed that in 34/137 (24.8%) patients, bleeding could not be controlled. There were only four (2.9%) patients with variceal bleeding in whom ABRI and

  5. Minimal requirements for quality controls in radiotherapy with external beams; Controlli di qualita' essenziali in radioterapia con fasci esterni

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    Physical dosimetric guidelines have been developed by the Italian National Institute of Health study group on quality assurance in radiotherapy to define protocols for quality controls in external beam radiotherapy. While the document does not determine strict rules or firm recommendations, it suggests minimal requirements for quality controls necessary to guarantee an adequate degree of accuracy in external beam radiotherapy. [Italian] Il gruppo di studio Assicurazione di qualita' in radioterapia dell'Istituto Superiore di Sanita' presenta le linee guida per la stesura dei protocolli di controllo di qualita' essenziali necessari a garantire un adeguato livello di accuratezza del trattamento radiante e rappresenta pertanto una parte essenziale del contributo fisico-dosimetrico globale di assicurazione di qualita' in radioterapia con fasci esterni.

  6. Trauma hemostasis and oxygenation research position paper on remote damage control resuscitation: definitions, current practice, and knowledge gaps.

    Science.gov (United States)

    Jenkins, Donald H; Rappold, Joseph F; Badloe, John F; Berséus, Olle; Blackbourne, Lorne; Brohi, Karim H; Butler, Frank K; Cap, Andrew P; Cohen, Mitchell Jay; Davenport, Ross; DePasquale, Marc; Doughty, Heidi; Glassberg, Elon; Hervig, Tor; Hooper, Timothy J; Kozar, Rosemary; Maegele, Marc; Moore, Ernest E; Murdock, Alan; Ness, Paul M; Pati, Shibani; Rasmussen, Todd; Sailliol, Anne; Schreiber, Martin A; Sunde, Geir Arne; van de Watering, Leo M G; Ward, Kevin R; Weiskopf, Richard B; White, Nathan J; Strandenes, Geir; Spinella, Philip C

    2014-05-01

    The Trauma Hemostasis and Oxygenation Research Network held its third annual Remote Damage Control Resuscitation Symposium in June 2013 in Bergen, Norway. The Trauma Hemostasis and Oxygenation Research Network is a multidisciplinary group of investigators with a common interest in improving outcomes and safety in patients with severe traumatic injury. The network's mission is to reduce the risk of morbidity and mortality from traumatic hemorrhagic shock, in the prehospital phase of resuscitation through research, education, and training. The concept of remote damage control resuscitation is in its infancy, and there is a significant amount of work that needs to be done to improve outcomes for patients with life-threatening bleeding secondary to injury. The prehospital phase of resuscitation is critical in these patients. If shock and coagulopathy can be rapidly identified and minimized before hospital admission, this will very likely reduce morbidity and mortality. This position statement begins to standardize the terms used, provides an acceptable range of therapeutic options, and identifies the major knowledge gaps in the field.

  7. Endogenous Glucagon-like Peptide-1 Receptor Signaling in the Nucleus Tractus Solitarius is Required for Food Intake Control.

    Science.gov (United States)

    Alhadeff, Amber L; Mergler, Blake D; Zimmer, Derek J; Turner, Christopher A; Reiner, David J; Schmidt, Heath D; Grill, Harvey J; Hayes, Matthew R

    2017-06-01

    Alhough the glucagon-like peptide-1 (GLP-1) system is critical to energy balance control and is a target for obesity pharmacotherapies, the receptor-population-mediating effects of endogenous GLP-1 signaling are not fully understood. To address this, we developed a novel adeno-associated virus (AAV-GLP-1R) that utilizes short hairpin RNA to chronically knock down GLP-1 receptors (GLP-1R) in rats. As pharmacological studies highlight the hindbrain nucleus tractus solitarius (NTS) as a brain region important for GLP-1R-mediated effects on energy balance, AAV-GLP-1R was injected into the NTS to examine the role of endogenous NTS GLP-1R signaling in energy balance control. Chow intake and meal size were significantly increased following chronic NTS GLP-1R knockdown. In addition, NTS GLP-1R knockdown significantly increased self-administration of palatable food under both fixed and progressive ratio schedules of reinforcement. Collectively, these data demonstrate that endogenous NTS GLP-1R signaling is required for the control of food intake and motivation to feed, and provide a new strategy to investigate the importance of distinct GLP-1R populations in the control of a variety of functions.

  8. Comprehensive Definition of the SigH Regulon of Mycobacterium tuberculosis Reveals Transcriptional Control of Diverse Stress Responses.

    Directory of Open Access Journals (Sweden)

    Jared D Sharp

    Full Text Available Expression of SigH, one of 12 Mycobacterium tuberculosis alternative sigma factors, is induced by heat, oxidative and nitric oxide stresses. SigH activation has been shown to increase expression of several genes, including genes involved in maintaining redox equilibrium and in protein degradation. However, few of these are known to be directly regulated by SigH. The goal of this project is to comprehensively define the Mycobacterium tuberculosis genes and operons that are directly controlled by SigH in order to gain insight into the role of SigH in regulating M. tuberculosis physiology. We used ChIP-Seq to identify in vivo SigH binding sites throughout the M. tuberculosis genome, followed by quantification of SigH-dependent expression of genes linked to these sites and identification of SigH-regulated promoters. We identified 69 SigH binding sites, which are located both in intergenic regions and within annotated coding sequences in the annotated M. tuberculosis genome. 41 binding sites were linked to genes that showed greater expression following heat stress in a SigH-dependent manner. We identified several genes not previously known to be regulated by SigH, including genes involved in DNA repair, cysteine biosynthesis, translation, and genes of unknown function. Experimental and computational analysis of SigH-regulated promoter sequences within these binding sites identified strong consensus -35 and -10 promoter sequences, but with tolerance for non-consensus bases at specific positions. This comprehensive identification and validation of SigH-regulated genes demonstrates an extended SigH regulon that controls an unexpectedly broad range of stress response functions.

  9. Comprehensive Definition of the SigH Regulon of Mycobacterium tuberculosis Reveals Transcriptional Control of Diverse Stress Responses.

    Science.gov (United States)

    Sharp, Jared D; Singh, Atul K; Park, Sang Tae; Lyubetskaya, Anna; Peterson, Matthew W; Gomes, Antonio L C; Potluri, Lakshmi-Prasad; Raman, Sahadevan; Galagan, James E; Husson, Robert N

    2016-01-01

    Expression of SigH, one of 12 Mycobacterium tuberculosis alternative sigma factors, is induced by heat, oxidative and nitric oxide stresses. SigH activation has been shown to increase expression of several genes, including genes involved in maintaining redox equilibrium and in protein degradation. However, few of these are known to be directly regulated by SigH. The goal of this project is to comprehensively define the Mycobacterium tuberculosis genes and operons that are directly controlled by SigH in order to gain insight into the role of SigH in regulating M. tuberculosis physiology. We used ChIP-Seq to identify in vivo SigH binding sites throughout the M. tuberculosis genome, followed by quantification of SigH-dependent expression of genes linked to these sites and identification of SigH-regulated promoters. We identified 69 SigH binding sites, which are located both in intergenic regions and within annotated coding sequences in the annotated M. tuberculosis genome. 41 binding sites were linked to genes that showed greater expression following heat stress in a SigH-dependent manner. We identified several genes not previously known to be regulated by SigH, including genes involved in DNA repair, cysteine biosynthesis, translation, and genes of unknown function. Experimental and computational analysis of SigH-regulated promoter sequences within these binding sites identified strong consensus -35 and -10 promoter sequences, but with tolerance for non-consensus bases at specific positions. This comprehensive identification and validation of SigH-regulated genes demonstrates an extended SigH regulon that controls an unexpectedly broad range of stress response functions.

  10. Copernicus Architecture, Phase I: Requirements Definition

    Science.gov (United States)

    1991-08-01

    Authorities ( NCA ), through the development of a broad, high-tech- nology commandconnectivity(e.g., video, voice, narrative) and through the establishment...does. THE COMMAND MODEL Although the Command GLOBIXS in- terconnect the National Command Authorities ( NCA ) and the numbered fleet commanders2...permanently recorded at the receiving site. The receiving site can display the imagery on a high-resolution cathode ray tube display or convert the display to

  11. Requirements Definition for ORNL Trusted Corridors Project

    Energy Technology Data Exchange (ETDEWEB)

    Walker, Randy M [ORNL; Hill, David E [ORNL; Smith, Cyrus M [ORNL; DeNap, Frank A [ORNL; White, James D [ORNL; Gross, Ian G [ORNL; Gorman, Bryan L [ORNL; Hively, Lee M [ORNL; Abercrombie, Robert K [ORNL

    2008-02-01

    The ORNL Trusted Corridors Project has several other names: SensorNet Transportation Pilot; Identification and Monitoring of Radiation (in commerce) Shipments (IMR(ic)S); and Southeastern Transportation Corridor Pilot (SETCP). The project involves acquisition and analysis of transportation data at two mobile and three fixed inspection stations in five states (Kentucky, Mississippi, South Carolina, Tennessee, and Washington DC). Collaborators include the State Police organizations that are responsible for highway safety, law enforcement, and incident response. The three states with fixed weigh-station deployments (KY, SC, TN) are interested in coordination of this effort for highway safety, law enforcement, and sorting/targeting/interdiction of potentially non-compliant vehicles/persons/cargo. The Domestic Nuclear Detection Office (DNDO) in the U.S. Department of Homeland Security (DHS) is interested in these deployments, as a Pilot test (SETCP) to identify Improvised Nuclear Devices (INDs) in highway transport. However, the level of DNDO integration among these state deployments is presently uncertain. Moreover, DHS issues are considered secondary by the states, which perceive this work as an opportunity to leverage these (new) dual-use technologies for state needs. In addition, present experience shows that radiation detectors alone cannot detect DHS-identified IND threats. Continued SETCP success depends on the level of integration of current state/local police operations with the new DHS task of detecting IND threats, in addition to emergency preparedness and homeland security. This document describes the enabling components for continued SETCP development and success, including: sensors and their use at existing deployments (Section 1); personnel training (Section 2); concept of operations (Section 3); knowledge discovery from the copious data (Section 4); smart data collection, integration and database development, advanced algorithms for multiple sensors, and network communications (Section 5); and harmonization of local, state, and Federal procedures and protocols (Section 6).

  12. Requirements Definition for ORNL Trusted Corridors Project

    International Nuclear Information System (INIS)

    Walker, Randy M; Hill, David E; Smith, Cyrus M; DeNap, Frank A; White, James D; Gross, Ian G; Gorman, Bryan L; Hively, Lee M; Abercrombie, Robert K

    2008-01-01

    The ORNL Trusted Corridors Project has several other names: SensorNet Transportation Pilot; Identification and Monitoring of Radiation (in commerce) Shipments (IMR(ic)S); and Southeastern Transportation Corridor Pilot (SETCP). The project involves acquisition and analysis of transportation data at two mobile and three fixed inspection stations in five states (Kentucky, Mississippi, South Carolina, Tennessee, and Washington DC). Collaborators include the State Police organizations that are responsible for highway safety, law enforcement, and incident response. The three states with fixed weigh-station deployments (KY, SC, TN) are interested in coordination of this effort for highway safety, law enforcement, and sorting/targeting/interdiction of potentially non-compliant vehicles/persons/cargo. The Domestic Nuclear Detection Office (DNDO) in the U.S. Department of Homeland Security (DHS) is interested in these deployments, as a Pilot test (SETCP) to identify Improvised Nuclear Devices (INDs) in highway transport. However, the level of DNDO integration among these state deployments is presently uncertain. Moreover, DHS issues are considered secondary by the states, which perceive this work as an opportunity to leverage these (new) dual-use technologies for state needs. In addition, present experience shows that radiation detectors alone cannot detect DHS-identified IND threats. Continued SETCP success depends on the level of integration of current state/local police operations with the new DHS task of detecting IND threats, in addition to emergency preparedness and homeland security. This document describes the enabling components for continued SETCP development and success, including: sensors and their use at existing deployments (Section 1); personnel training (Section 2); concept of operations (Section 3); knowledge discovery from the copious data (Section 4); smart data collection, integration and database development, advanced algorithms for multiple sensors, and network communications (Section 5); and harmonization of local, state, and Federal procedures and protocols (Section 6)

  13. The importance of being earnest when crafting definitions: science and scientism are not the same thing.

    Science.gov (United States)

    Nash, Michael R

    2005-07-01

    The APA Division 30 definition of hypnosis is laudable in some respects. For instance, the committee rightly defines the "induction" as nothing more or less than the first suggestion after the introduction. However, the definition stumbles over its nonposition on whether the word hypnosis must be uttered during the procedure. This equivocation invites research designs that preemptively define a hypnotic group and a control group in terms of whether or not the word hypnosis is used in the protocol. These designs represent a backslide into naive operationism; they reveal little new about human nature or hypnosis. The field deserves an optimally heuristic definition that preserves pluralism and is relatively resistant to the teflon shield of preemptive definition. Researchers and practioners require a definition that recognizes the incompleteness of our concepts, generates a level epistemological playing field, and enables hypnosis theories to "reach."

  14. 42 CFR 436.530 - Definition of blindness.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Definition of blindness. 436.530 Section 436.530... Requirements for Medicaid Eligibility Blindness § 436.530 Definition of blindness. (a) Definition. The agency must use the definition of blindness that is used in the State plan for AB or AABD. (b) State plan...

  15. 42 CFR 435.530 - Definition of blindness.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Definition of blindness. 435.530 Section 435.530... ISLANDS, AND AMERICAN SAMOA Categorical Requirements for Eligibility Blindness § 435.530 Definition of blindness. (a) Definition. The agency must use the same definition of blindness as used under SSI, except...

  16. JNK Controls the Onset of Mitosis in Planarian Stem Cells and Triggers Apoptotic Cell Death Required for Regeneration and Remodeling

    Science.gov (United States)

    Almuedo-Castillo, María; Crespo, Xenia; Seebeck, Florian; Bartscherer, Kerstin; Salò, Emili; Adell, Teresa

    2014-01-01

    Regeneration of lost tissues depends on the precise interpretation of molecular signals that control and coordinate the onset of proliferation, cellular differentiation and cell death. However, the nature of those molecular signals and the mechanisms that integrate the cellular responses remain largely unknown. The planarian flatworm is a unique model in which regeneration and tissue renewal can be comprehensively studied in vivo. The presence of a population of adult pluripotent stem cells combined with the ability to decode signaling after wounding enable planarians to regenerate a complete, correctly proportioned animal within a few days after any kind of amputation, and to adapt their size to nutritional changes without compromising functionality. Here, we demonstrate that the stress-activated c-jun–NH2–kinase (JNK) links wound-induced apoptosis to the stem cell response during planarian regeneration. We show that JNK modulates the expression of wound-related genes, triggers apoptosis and attenuates the onset of mitosis in stem cells specifically after tissue loss. Furthermore, in pre-existing body regions, JNK activity is required to establish a positive balance between cell death and stem cell proliferation to enable tissue renewal, remodeling and the maintenance of proportionality. During homeostatic degrowth, JNK RNAi blocks apoptosis, resulting in impaired organ remodeling and rescaling. Our findings indicate that JNK-dependent apoptotic cell death is crucial to coordinate tissue renewal and remodeling required to regenerate and to maintain a correctly proportioned animal. Hence, JNK might act as a hub, translating wound signals into apoptotic cell death, controlled stem cell proliferation and differentiation, all of which are required to coordinate regeneration and tissue renewal. PMID:24922054

  17. 'To preserve the skin in health': drainage, bodily control and the visual definition of healthy skin 1835-1900.

    Science.gov (United States)

    te Hennepe, Mieneke

    2014-07-01

    The concept of a healthy skin penetrated the lives of many people in late-nineteenth-century Britain. Popular writings on skin and soap advertisements are significant for pointing to the notions of the skin as a symbolic surface: a visual moral ideal. Popular health publications reveal how much contemporary understanding of skin defined and connected ideas of cleanliness and the visual ideals of the healthy body in Victorian Britain. Characterised as a 'sanitary commissioner' of the body, skin represented the organ of drainage for body and society. The importance of keeping the skin clean and purging it of waste materials such as sweat and dirt resonated in a Britain that embraced city sanitation developments, female beauty practices, racial identities and moral reform. By focusing on the popular work by British surgeon and dermatologist Erasmus Wilson (1809-84), this article offers a history of skin through the lens of the sanitary movement and developments in the struggle for control over healthy skin still in place today.

  18. Instrumentation and control strategies for power plants. Volume 2: Problem definition and recommendations. Final report, December 1990

    International Nuclear Information System (INIS)

    1990-12-01

    The I and C systems now in service are largely based on process technology from the 50s and 60s. Replacement parts are becoming unavailable and the infrastructure of designers, engineers and manufacturers to support the existing obsolete I and C technology is disappearing. Without the stimulus of new plant orders, there has been little incentive to develop new nuclear plant I and C technology. State-of-the-art I and C systems can provide highly analyzed status information, can control complex functions in a more refined way, are more reliable, and more economical. Modern I and C technology takes full advantage of both analog and digital capabilities, using each to its best advantage. EPRI is expanding its efforts to bridge the gap that had developed between the U.S. power industry and state-of-the-art I and C technology. In March of 1990 EPRI sponsored an I and C workshop to solicit utility industry views as to how this effort could most productively proceed. The material of the workshop, which is described in this report (Volumes 1 and 2), covered where we are in I and C technology, where we need to go, and provided input toward defining a strategy for I and C research and development. (author)

  19. Elucidation of the first definitively identified life cycle for a marine turtle blood fluke (Trematoda: Spirorchiidae) enables informed control.

    Science.gov (United States)

    Cribb, Thomas H; Crespo-Picazo, Jose L; Cutmore, Scott C; Stacy, Brian A; Chapman, Phoebe A; García-Párraga, Daniel

    2017-01-01

    Blood flukes of the family Spirorchiidae are significant pathogens of both free-ranging and captive marine turtles. Despite a significant proportion of marine turtle mortality being attributable to spirorchiid infections, details of their life cycles remain almost entirely unknown. Here we report on the molecular elucidation of the complete life cycle of a marine spirorchiid, identified as Amphiorchis sp., infecting vermetid gastropods and captive hatched neonate Caretta caretta in the Oceanogràfic Aquarium, in Valencia, Spain. Specimens of a vermetid gastropod, Thylaeodus cf. rugulosus (Monterosato, 1878), collected from the aquarium filtration system housing diseased C. caretta, were infected with sporocysts and cercariae consistent with the family Spirorchiidae. We generated rDNA sequence data [internal transcribed spacer 2 (ITS2) and partial 28S rDNA] from infections from the vermetid which were identical to sequences generated from eggs from the serosa of the intestine of neonate C. caretta, and an adult spirorchiid from the liver of a C. caretta from Florida, USA. Given the reliability of these markers in the delineation of trematode species, we consider all three stages to represent the same species and tentatively identify it as a species of Amphiorchis Price, 1934. The source of infection at the Oceanogràfic Foundation Rehabilitation Centre, Valencia, Spain, is inferred to be an adult C. caretta from the western Mediterranean being rehabilitated in the same facility. Phylogenetic analysis suggests that this Amphiorchis sp. is closely related to other spirorchiids of marine turtles (species of Carettacola Manter & Larson, 1950, Hapalotrema Looss, 1899 and Learedius Price, 1934). We discuss implications of the present findings for the control of spirorchiidiasis in captivity, for the better understanding of epidemiology in wild individuals, and the elucidation of further life cycles. Copyright © 2016 Australian Society for Parasitology. Published by

  20. Waste management system requirements document

    International Nuclear Information System (INIS)

    1991-02-01

    This volume defines the top level requirements for the Mined Geologic Disposal System (MGDS). It is designed to be used in conjunction with Volume 1 of the WMSR, General System Requirements. It provides a functional description expanding the requirements allocated to the MGDS in Volume 1 and elaborates on each requirement by providing associated performance criteria as appropriate. Volumes 1 and 4 of the WMSR provide a minimum set of requirements that must be satisfied by the final MGDS design. This document sets forth specific requirements that must be fulfilled. It is not the intent or purpose of this top level document to describe how each requirement is to be satisfied in the final MGDS design. Each subsequent level of the technical document hierarchy must provide further guidance and definition as to how each of these requirements is to be implemented in the design. It is expected that each subsequent level of requirements will be significantly more detailed. Section 2 of this volume provides a functional description of the MGDS. Each function is addressed in terms of requirements, and performance criteria. Section 3 provides a list of controlling documents. Each document cited in a requirement of Chapter 2 is included in this list and is incorporated into this document as a requirement on the final system. The WMSR addresses only federal requirements (i.e., laws, regulations and DOE orders). State and local requirements are not addressed. However, it will be specifically noted at the potentially affected WMSR requirements that there could be additional or more stringent regulations imposed by a state or local requirements or administering agency over the cited federal requirements

  1. Identifying the Infection Control Areas Requiring Modifications in Thoracic Surgery Units: Results of a Two-Year Surveillance of Surgical Site Infections in Hospitals in Southern Poland.

    Science.gov (United States)

    Dubiel, Grzegorz; Rogoziński, Paweł; Żaloudik, Elżbieta; Bruliński, Krzysztof; Różańska, Anna; Wójkowska-Mach, Jadwiga

    2017-10-01

    Surgical site infection (SSI) is considered to be a priority in infection control. The objective of this study is the analysis of results of active targeted surveillance conducted over a two-year period in the Department of Thoracic Surgery at the Pulmonology and Thoracic Surgery Center in Bystra, in southern Poland. The retrospective analysis was carried out on the basis of results of active monitoring of SSI in the 45-bed Department of Thoracic Surgery at the Pulmonology and Thoracic Surgery Center in Bystra between April 1, 2014 and April 30, 2016. Surgical site infections were identified based on the definitions of the European Centre for Disease Prevention and Control (ECDC) taking into account the time of symptom onset, specifically, whether the symptoms occurred within 30 d after the surgical procedure. Detection of SSI relied on daily inspection of incisions by a trained nurse, analysis of medical and nursing entries in the computer system, and analysis of all results of microbiologic tests taken in the unit and in the operating room. In the study period, data were collected regarding 1,387 treatment procedures meeting the registration criteria. Forty cases of SSI were detected yielding an incidence rate of 3%. Most cases (55%) were found in the course of hospitalization and 45% were detected after the patient's discharge. The SSIs were classified as follows: superficial, 37.5%; deep infections, 7.5%; and organ/space infection, 55%. Among patients who were diagnosed with SSI, most were male (77.5%). For patients with an American Society of Anesthesiologists (ASA) score I-II the incidence rate was 2%; ASA score III or more, 3.7%. The incidence rate varied from 0.3% in clean surgical site to 6.5% in clean-contaminated site. The study validated the usefulness of targeted surveillance in monitoring SSIs in patients hospitalized in thoracic surgery departments. Surgical site infection surveillance identified areas of care requiring modifications, namely

  2. Age differences in the required coefficient of friction during level walking do not exist when experimentally-controlling speed and step length.

    Science.gov (United States)

    Anderson, Dennis E; Franck, Christopher T; Madigan, Michael L

    2014-08-01

    The effects of gait speed and step length on the required coefficient of friction (COF) confound the investigation of age-related differences in required COF. The goals of this study were to investigate whether age differences in required COF during self-selected gait persist when experimentally-controlling speed and step length, and to determine the independent effects of speed and step length on required COF. Ten young and 10 older healthy adults performed gait trials under five gait conditions: self-selected, slow and fast speeds without controlling step length, and slow and fast speeds while controlling step length. During self-selected gait, older adults walked with shorter step lengths and exhibited a lower required COF. Older adults also exhibited a lower required COF when walking at a controlled speed without controlling step length. When both age groups walked with the same speed and step length, no age difference in required COF was found. Thus, speed and step length can have a large influence on studies investigating age-related differences in required COF. It was also found that speed and step length have independent and opposite effects on required COF, with step length having a strong positive effect on required COF, and speed having a weaker negative effect.

  3. 32. The scheme of quality control of technical purity aluminum in electrolysis shop of Tajik aluminium Plant in accordance with the requirements of State Standards

    International Nuclear Information System (INIS)

    Ivanov, A.V.

    1993-01-01

    The scheme of quality control of technical purity aluminum in electrolysis shop of Tajik aluminium Plant in accordance with the requirements of State Standards was discussed. The place of sampling or control was defined. The periodicity of sampling or control was defined as well. The characteristics of probe were studied.

  4. 33. The scheme of quality control of silumin in electrolysis shop of Tajik aluminium Plant in accordance with the requirements of State Standard 1521-76

    International Nuclear Information System (INIS)

    Ivanov, A.V.

    1993-01-01

    The scheme of quality control of silumin in electrolysis shop of Tajik aluminium Plant in accordance with the requirements of State Standard 1521-76 was discussed. The place of sampling or control was defined. The periodicity of sampling or control was defined as well. The characteristics of probe were studied.

  5. 40 CFR 63.3169 - What are the requirements for a capture system or add-on control device which is not taken into...

    Science.gov (United States)

    2010-07-01

    ... systems or add-on control devices which you choose not to take into account when demonstrating compliance... system or add-on control device which is not taken into account when demonstrating compliance with the....3169 What are the requirements for a capture system or add-on control device which is not taken into...

  6. Method to control the persons permitted to enter plants with increased security requirements and personnel lock for such plants

    International Nuclear Information System (INIS)

    Blaser, E.; Eickhoff, H.; Tretschoks, W.

    1978-01-01

    The personnel lock for a plant with increased security requirements, e.g. a nuclear power plant, has got two lock gates. Only persons whose right to enter has been established by the control equipment will be admitted to the lock chamber. For this purpose an identification recess is built in front of the first access to the lock chamber, where size, weight and the contours of the persons wanting to enter are roughly measured and compared with a code card carried along. The weight is established by a balance forming part of the base of the recess. By means of contact surfaces in the region of knees, upper thigh, chest and shoulder an upright position of the person is guaranteed. Scanning of the physical dimensions is performed with laser, infrared and light barriers. (DG) [de

  7. CT findings at the primary site of oropharyngeal squamous cell carcinoma within 6-8 weeks after definitive radiotherapy as predictors of primary site control

    International Nuclear Information System (INIS)

    Ojiri, Hiroya; Mendenhall, William M.; Mancuso, Anthony A.

    2002-01-01

    Purpose: To determine whether findings on CT studies, done 6 weeks after radiotherapy (RT), can predict the likelihood of ultimate control at the primary site in oropharyngeal carcinoma. Methods and Materials: Forty-six patients with oropharyngeal squamous cell carcinoma underwent RT with curative intent. A minimal 2-year clinical follow-up after RT was required. The primary site CT findings were graded for risk of recurrence on a modified 3-point scale as follows: Grade 0, no detectable focal abnormalities; Grade 1, anatomic asymmetry or focal mass 10 mm (2a) or 10 mm at the primary site, the likelihood of local control is high (93%). The study results indicate that CT findings, based on this relatively small series, may not add incremental information beyond that of clinical examination for predicting local control but may be useful as a baseline if imaging surveillance is contemplated

  8. Practical support for Lean Six Sigma software process definition using IEEE software engineering standards

    CERN Document Server

    Land, Susan K; Walz, John W

    2012-01-01

    Practical Support for Lean Six Sigma Software Process Definition: Using IEEE Software Engineering Standards addresses the task of meeting the specific documentation requirements in support of Lean Six Sigma. This book provides a set of templates supporting the documentation required for basic software project control and management and covers the integration of these templates for their entire product development life cycle. Find detailed documentation guidance in the form of organizational policy descriptions, integrated set of deployable document templates, artifacts required in suppo

  9. Primary definitive procedure versus conventional three-staged procedure for the management of low-type anorectal malformation in females: A randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Alisha Gupta

    2017-01-01

    Conclusions: Females with VF or PF undergoing primary definitive procedure have a significantly higher incidence of wound dehiscence (P = 0.04, immediate (P = 0.001 and early postoperative complications (P = 0.01.

  10. 42 CFR 456.151 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Definitions. 456.151 Section 456.151 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS UTILIZATION CONTROL Utilization Control: Mental Hospitals § 456.151 Definitions. As used...

  11. Where to deliver baits for deworming urban red foxes for Echinococcus multilocularis control: new protocol for micro-habitat modeling of fox denning requirements.

    Science.gov (United States)

    Ikeda, Takako; Yoshimura, Masashi; Onoyama, Keiichi; Oku, Yuzaburo; Nonaka, Nariaki; Katakura, Ken

    2014-08-06

    Deworming wild foxes by baiting with the anthelmintic praziquantel is being established as a preventive technique against environmental contamination with Echinococcus multilocularis eggs. Improvement of the cost-benefit performance of baiting treatment is required urgently to raise and maintain the efficacy of deworming. We established a spatial model of den site selection by urban red foxes, the definitive host, to specify the optimal micro-habitats for delivering baits in a new modeling approach modified for urban fox populations. The model was established for two cities (Obihiro and Sapporo) in Hokkaido, Japan, in which a sylvatic cycle of E. multilocularis is maintained. The two cities have different degrees of urbanization. The modeling process was designed to detect the best combination of key environmental factors and spatial scale that foxes pay attention to most (here named 'heeding range') when they select den sites. All possible models were generated using logistic regression analysis, with "presence" or "absence" of fox den as the objective variable, and nine landscape categories customized for urban environments as predictor variables to detect the best subset of predictors. This procedure was conducted for each of ten sizes of concentric circles from dens and control points to detect the best circle size. Out of all models generated, the most parsimonious model was selected using Akaike's Information Criterion (AIC) inspection. Our models suggest that fox dens in Obihiro are located at the center of a circle with 500 m radius including low percentages of wide roads, narrow roads, and occupied buildings, but high percentages of green covered areas; the dens in Sapporo within 300 m radius with low percentages of wide roads, occupied buildings, but high percentages of riverbeds and green covered areas. The variation of the models suggests the necessity of accumulating models for various types of cities in order to reveal the patterns of the model. Our

  12. The use of acupuncture in controlling the gag reflex in patients requiring an upper alginate impression: an audit.

    Science.gov (United States)

    Rosted, P; Bundgaard, M; Fiske, J; Pedersen, A M L

    2006-12-09

    A pronounced gag reflex (GR) can be a problem to both the acceptance and delivery of dental treatment. Despite a range of management strategies, some patients cannot accept even simple dental treatment. The aim of this study was to evaluate the use of acupuncture point CV-24 in controlling a profound gag reflex during dental treatment requiring an upper alginate impression. Members of the British Dental Acupuncture Society were invited to take part in an audit of the role of acupuncture point CV-24 in controlling the gag reflex. They were issued with patient inclusion criteria, a standardised procedure instruction sheet and a recording form. All patients fulfilling the inclusion criteria had an upper dental alginate impression taken (or an attempt made at it) before acupuncture, and a second upper alginate impression taken immediately after acupuncture of point CV-24. The GR assessment was undertaken prior to insertion of the acupuncture needle using the Gagging Severity Index (GSI); and after the acupuncture and impression taking using the Gagging Prevention Index (GPI). Both the GSI and GPI were recorded at three stages of the dental impression taking procedure, ie, when the empty impression tray was tried in the mouth, when the loaded tray was inserted into the mouth, and on completion of the impression taking. Twenty-one dentists submitted 64 case reports of which 37 fulfilled the inclusion criteria. Prior to acupuncture all 37 patients (20 females and 17 males with a mean age of 46.8 years) were unable to accept the impression taking. After acupuncture of point CV-24, an improvement of between 51-55% (mean 53%) for the three stages of impression taking was noticed. Thirty patients (81%) were able to accept the impression taking, whereas seven (19%) remained unable to tolerate the procedure. Assessed by the GSI and GPI, there was a significant decrease in GR scores at all three stages of the impression taking procedure (median 3 vs 1; 4 vs 2; 4 vs 2; p dental

  13. Monitoring and control requirement definition study for Dispersed Storage and Generation (DSG). Volume 3, appendix B: State of the art, trends, and potential growth of selected DSG technologies

    Science.gov (United States)

    1980-01-01

    Present and future relatively small (30 MW) energy systems, such as solar thermal electric, photovoltaic, wind, fuel cell, storage battery, hydro, and cogeneration can help achieve national energy goals and can be dispersed throughout the distribution portion of an electric utility system. Based on current projections, it appears that dispersed storage and generation (DSG) electrical energy will comprise only a small portion, from 4 to 10 percent, of the national total by the end of this century. In general, the growth potential for DSG seems favorable in the long term because of finite fossil energy resources and increasing fuel prices. Recent trends, especially in the institutional and regulatory fields, favor greater use of the DSGs for the future.

  14. Requirements for Ion Sources

    International Nuclear Information System (INIS)

    Scrivens, R

    2013-01-01

    Ion sources produce beams for a large variety of different physical experiments, industrial processes and medical applications. In order to characterize the beam delivered by them, a list of requirements is necessary. In this chapter the list of principal requirements is specified and definitions for them are given. (author)

  15. 40 CFR Table 2 to Subpart Ggggg of... - Control Levels as Required by § 63.7895(a) for Tanks Managing Remediation Material With a Maximum...

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 13 2010-07-01 2010-07-01 false Control Levels as Required by § 63.7895(a) for Tanks Managing Remediation Material With a Maximum HAP Vapor Pressure Less Than 76.6 kPa 2..., Subpt. GGGGG, Table 2 Table 2 to Subpart GGGGG of Part 63—Control Levels as Required by § 63.7895(a) for...

  16. Definition of containment issues

    International Nuclear Information System (INIS)

    Walker, D.H.

    1982-01-01

    Public Law 96-567 Nuclear Safety Research, Development and Demonstration Act of 1980, directed the US Department of Energy (DOE) to provide an accelerated and coordinated program for developing practical generic improvements that would enhance the capability for safe, reliable and economical operation of Light Water Nuclear Reactor Power Stations. The DOE approach to defining such a program will consist of two phases, (1) definition of program requirements and (2) implementation of the program plan. This paper summarizes the results of the program definition phase for the containment integrity function. The definition phase effort was carried out by two groups of knowledgeable technical experts from the nuclear industry, one of which addressed containment integrity. Tabulated in the paper are the issues identified by the working groups and their associated priorities. Also tabulated are those high priority issues for which ongoing programs do not appear to provide sufficient information to resolve the issue. The results of this review show that existing programs to a great extent address existing issues in a manner such that the issues should be resolved by the programs

  17. GABP transcription factor is required for development of chronic myelogenous leukemia via its control of PRKD2.

    Science.gov (United States)

    Yang, Zhong-Fa; Zhang, Haojian; Ma, Leyuan; Peng, Cong; Chen, Yaoyu; Wang, Junling; Green, Michael R; Li, Shaoguang; Rosmarin, Alan G

    2013-02-05

    Hematopoietic stem cells (HSCs) are the source of all blood lineages, and HSCs must balance quiescence, self-renewal, and differentiation to meet lifelong needs for blood cell development. Transformation of HSCs by the breakpoint cluster region-ABL tyrosine kinase (BCR-ABL) oncogene causes chronic myelogenous leukemia (CML). The E-twenty six (ets) transcription factor GA binding protein (GABP) is a tetrameric transcription factor complex that contains GABPα and GABPβ proteins. Deletion in bone marrow of Gabpa, the gene that encodes the DNA-binding component, caused cell cycle arrest in HSCs and profound loss of hematopoietic progenitor cells. Loss of Gabpα prevented development of CML, although mice continued to generate BCR-ABL-expressing Gabpα-null cells for months that were serially transplantable and contributed to all lineages in secondary recipients. A bioinformatic screen identified the serine-threonine kinase protein kinase D2 (PRKD2) as a potential effector of GABP in HSCs. Prkd2 expression was markedly reduced in Gabpα-null HSCs and progenitor cells. Reduced expression of PRKD2 or pharmacologic inhibition decreased cell cycling, and PRKD2 rescued growth of Gabpα-null BCR-ABL-expressing cells. Thus, GABP is required for HSC cell cycle entry and CML development through its control of PRKD2. This offers a potential therapeutic target in leukemia.

  18. Dosage-sensitive function of retinoblastoma related and convergent epigenetic control are required during the Arabidopsis life cycle.

    Directory of Open Access Journals (Sweden)

    Amal J Johnston

    2010-06-01

    Full Text Available The plant life cycle alternates between two distinct multi-cellular generations, the reduced gametophytes and the dominant sporophyte. Little is known about how generation-specific cell fate, differentiation, and development are controlled by the core regulators of the cell cycle. In Arabidopsis, RETINOBLASTOMA RELATED (RBR, an evolutionarily ancient cell cycle regulator, controls cell proliferation, differentiation, and regulation of a subset of Polycomb Repressive Complex 2 (PRC2 genes and METHYLTRANSFERASE 1 (MET1 in the male and female gametophytes, as well as cell fate establishment in the male gametophyte. Here we demonstrate that RBR is also essential for cell fate determination in the female gametophyte, as revealed by loss of cell-specific marker expression in all the gametophytic cells that lack RBR. Maintenance of genome integrity also requires RBR, because diploid plants heterozygous for rbr (rbr/RBR produce an abnormal portion of triploid offspring, likely due to gametic genome duplication. While the sporophyte of the diploid mutant plants phenocopied wild type due to the haplosufficiency of RBR, genetic analysis of tetraploid plants triplex for rbr (rbr/rbr/rbr/RBR revealed that RBR has a dosage-dependent pleiotropic effect on sporophytic development, trichome differentiation, and regulation of PRC2 subunit genes CURLY LEAF (CLF and VERNALIZATION 2 (VRN2, and MET1 in leaves. There were, however, no obvious cell cycle and cell proliferation defects in these plant tissues, suggesting that a single functional RBR copy in tetraploids is capable of maintaining normal cell division but is not sufficient for distinct differentiation and developmental processes. Conversely, in leaves of mutants in sporophytic PRC2 subunits, trichome differentiation was also affected and expression of RBR and MET1 was reduced, providing evidence for a RBR-PRC2-MET1 regulatory feedback loop involved in sporophyte development. Together, dosage-sensitive RBR

  19. Reset Control Systems

    CERN Document Server

    Baños, Alfonso

    2012-01-01

    Reset Control Systems addresses the analysis for reset control treating both its basic form which requires only that the state of the controller be reinitialized to zero (the reset action) each time the tracking error crosses zero (the reset condition), and some useful variations of the reset action (partial reset with fixed or variable reset percentage) and of the reset condition (fixed or variable reset band and anticipative reset). The issues regarding reset control – concepts and motivation; analysis tools; and the application of design methodologies to real-world examples – are given comprehensive coverage. The text opens with an historical perspective which moves from the seminal work of the Clegg integrator and Horowitz FORE to more recent approaches based on impulsive/hybrid control systems and explains the motivation for reset compensation. Preliminary material dealing with notation, basic definitions and results, and with the definition of the control problem under study is also included. The fo...

  20. Procedural Issues regarding the Audit of the Management and Control of EU Funds, in Terms of Specific Key Requirements of the New Funding Period 2014 - 2020

    Directory of Open Access Journals (Sweden)

    Stelian Selișteanu

    2016-11-01

    Full Text Available In practice, planning the audit of management and control for each operational program and for the whole programming period, will perform during substantiation audit strategy, based on analysis and risk assessment, made at the entities involved in implementing the operational program. In what follows, we propose an assessment guidelines for the 2014- 2020 programming period, especially in terms of explanation addressed key requirements that must be used, explaining the evaluation criteria for each key requirement, providing guidance for drawing conclusions for each key requirement by each authority and finally making recommendations for establishing general conclusions regarding the management and control.