WorldWideScience

Sample records for control program vol

  1. Effects of training programs based on ipsilateral voluntary and stimulated contractions on muscle strength and monopedal postural control of the contralateral limb.

    Science.gov (United States)

    Kadri, Mohamed Abdelhafid; Noé, Frederic; Nouar, Merbouha Boulahbel; Paillard, Thierry

    2017-09-01

    To compare the effects of unilateral strength training by stimulated and voluntary contractions on muscle strength and monopedal postural control of the contralateral limb. 36 non-active healthy male subjects were recruited and split randomly into three groups. Two groups of 12 subjects took part in a strength-training program (3 sessions a week over 8 weeks) comprising 43 contractions of the quadriceps femoris of the ipsilateral limb (at 20% of the MVC). One group carried out voluntary contractions exclusively (VOL group), while the other group benefited exclusively from electro-induced contractions (NMES group). The other 12 subjects formed the control (CON) group. Assessments of MVC and monopedal postural control in static and dynamic postural tasks were performed with the ipsilateral (ISPI) and contralateral (CONTRA) limbs before (PRE) and after (POST) completion of the training program. After the training program, the MVC of the IPSI and CONTRA limbs increased similarly for both experimental groups (VOL and NMES). There were no significant improvements of monopedal postural control for the IPSI or CONTRA limbs in either the VOL or NMES experimental group. No change was observed for the CON group over the protocol period. The purposed training program with NMES vs VOL contractions induced strength gains but did not permit any improvement of contralateral monopedal postural control in healthy young subjects. This has potential for therapeutic application and allows clinicians to focus their training programs on dynamic and poly-articular exercises to improve the postural control in young subjects.

  2. Evaluation of Capacity on a High Throughput Vol-oxidizer for Operability

    International Nuclear Information System (INIS)

    Kim, Young Hwan; Park, Geun Il; Lee, Jung Won; Jung, Jae Hoo; Kim, Ki Ho; Lee, Yong Soon; Lee, Do Youn; Kim, Su Sung

    2010-01-01

    KAERI is developing a pyro-process. As a piece of process equipment, a high throughput vol-oxidizer which can handle a several tens kg HM/batch was developed to supply U 3 O 8 powders to an electrolytic reduction(ER) reactor. To increase the reduction yield, UO 2 pellets should be converted into uniform powders. In this paper, we aim at the evaluation of a high throughput vol-oxidizer for operability. The evaluation consisted of 3 targets, a mechanical motion test, a heating test and hull separation test. In order to test a high throughput vol-oxidizer, By using a control system, mechanical motion tests of the vol-oxidizer were conducted, and heating rates were analyzed. Also the separation tests of hulls for recovery rate were conducted. The test results of the vol-oxidizer are going to be applied for operability. A study on the characteristics of the volatile gas produced during a vol-oxidation process is not included in this study

  3. Vol draadwerk

    African Journals Online (AJOL)

    Owner

    Die motto van Marius Crous se derde bundel,. Vol draadwerk (2012) is ontleen aan die vader van die psigoanalise, Sigmund Freud, wat lui: “Everywhere I go I find a poet has been there before me.” Vol draadwerk verskyn ses jaar ná sy vorige bundel, Aan 'n beentjie sit en kluif. (2006). Vir sy bundel, Brief uit die kolonies ...

  4. 51. Meeting of the Chemical Societies: Almanac of Contributions, Vol. Program, 1, 2, 3, 4 Molecular Models (Workshop)

    International Nuclear Information System (INIS)

    Uher, M.; Benes, P.; Carsky, J.; Ctrnactova, H.; Fecenko, J.; Fellner, P.; Hodul, P.; Koprda, V.; Kratochvil, B.; Krkoska, P.; Kuruc, J.; Lehotay, J.; Matousek, J.; Milichovsky, P.; Omastova, M.; Petrus, L. jr.; Petrus, L. sr.; Schwendt, P.; Silny, P.; Sevcik, P.; Toma, S.; Uherova, R.; Zachar, P.

    1999-09-01

    The publication has been set up as a abstracts of the meeting dealing with different chemical problems. The book (Vol. 1) consists of the sections: All-plenary lectures (9 papers); (D) History of the chemistry (14); (K) Didactics of chemistry (32); The book (Vol. 2) consists of the sections: (A) Analytical chemistry (48); (B) Inorganic chemistry (75); (C) Physical chemistry (27); (F) Nuclear chemistry and radioecology (12); (L) Environmental chemistry and toxicology (33); (M) Agricultural chemistry (20). The book (Vol. 3) consists of the sections: (E) Wood, pulp, paper (15); (G) Macromolecular chemistry (42); (H) Organic chemistry, bio-organic chemistry and pharmaceutical chemistry (96); (I) Food chemistry and biochemistry (34); (J) Textile, fibres and foil materials (9). The book (Vol. 4) consists of the workshop Molecular models (3 papers)

  5. Proceedings of the second international conference on environmental impact assessment of all economical activities. Vol. 1

    International Nuclear Information System (INIS)

    1993-01-01

    Proceedings of the conference consist of 3 volumes: Vol. 1 - 'Environmental Impact Assessment of all Economical Activities including Industry'; Vol. 2 - 'Air Pollution Control and Prevention'; Vol. 3 - Waste Management and Environmental Problems in Construction Industry'. Out of 32 papers contained in Vol. 1, 2 were inputted to INIS. They deal with models of radionuclide transport in food chains and the use of aerial monitoring in the study of environmental contamination. (Z.S.)

  6. Measurement control program

    International Nuclear Information System (INIS)

    Anon.

    1981-01-01

    A measurement control program for the model plant is described. The discussion includes the technical basis for such a program, the application of measurement control principles to each measurement, and the use of special experiments to estimate measurement error parameters for difficult-to-measure materials. The discussion also describes the statistical aspects of the program, and the documentation procedures used to record, maintain, and process the basic data. The purpose of the session is to enable participants to: (1) understand the criteria for this type of a measurement control program; (2) understand the kinds of physical standards required for the various measurement processes, e.g., weighing, analytical, NDA; (3) understand the need for and importance of a measurement control program; (4) understand the need for special experiments to provide an improved basis for the measurement of difficult-to-measure materials; (5) understand the general scope of the program's statistical aspects; and (6) understand the basis and scope of the documentation procedures

  7. Proceedings of the second international conference on environmental impact assessment of all economical activities. Vol. 2

    International Nuclear Information System (INIS)

    1993-01-01

    Proceedings of the conference consist of 3 volumes: Vol. 1 - 'Environmental Impact Assessment of all Economical Activities including Industry'; Vol. 2 - 'Air Pollution Control and Prevention'; Vol. 3 - Waste Management and Environmental Problems in Construction Industry'. Out of 32 papers contained in Vol. 2, 4 were inputted to INIS. They deal with nuclear fusion as a potential energy source, with environmental aspects of disposal of ashes from power plants in the Czech Republic, and with land reclamation after mining activities. (Z.S.)

  8. Proceedings of the second international conference on environmental impact assessment of all economical activities. Vol. 3

    International Nuclear Information System (INIS)

    1993-01-01

    Proceedings of the conference consist of 3 volumes: Vol. 1 - 'Environmental Impact Assessment of all Economical Activities including Industry'; Vol. 2 - 'Air Pollution Control and Prevention'; Vol. 3 - Waste Management and Environmental Problems in Construction Industry'. Out of 39 papers contained in Vol. 3, 3 were inputted to INIS. They deal with the use of portable radioisotope X-ray fluorescence analyzers in the determination of building material contamination by toxic elements, with underground waste repositories and ground water contamination, and the impact of the Temelin nuclear power plant on the hydrosphere and other environmental components. (Z.S.)

  9. Perception and acceptance of technological risks. Vol. 3

    Energy Technology Data Exchange (ETDEWEB)

    Renn, O

    1981-01-01

    Vol. 3 discusses the problem of attitudes towards nuclear power. Data are compiled for five communities in North-Rhine Westphalia with nuclear facilities and the control community of Kerpen, which has no nuclear power plant. At the same time, the empirical and theoretical investigations are comprehensively evaluated.

  10. Perspective on BVDV control programs.

    Science.gov (United States)

    Givens, M Daniel; Newcomer, Benjamin W

    2015-06-01

    Programs for control and eradication of bovine viral diarrhea virus (BVDV) are often considered prudent when the expense of a control program within a specified time frame effectively prevents loss due to disease and the expense of control does not exceed the costs associated with infection. In some geographic areas, concerns about animal welfare or desires to reduce antibiotic usage may motivate BVDV control even when control programs are associated with a lack of financial return on investment. In other geographic areas, concerns about financial return on investment may be the key motivating factor in considering implementation of BVDV control programs. Past experiences indicate that systematic, well-coordinated control programs have a clear potential for success, while voluntary control programs in cultures of distributed decision-making often result in notable initial progress that ultimately ends in dissolution of efforts. Segmentation of the cattle industry into cow-calf producers, stocker/backgrounders, and feedlot operators amplifies the distribution of decision-making regarding control programs and may result in control measures for one industry segment that are associated with significant costs and limited rewards. Though the host range of BVDV extends well beyond cattle, multiple eradication programs that focus only on testing and removal of persistently infected (PI) cattle have proven to be effective in various countries. While some individuals consider education of producers to be sufficient to stimulate eradication of BVDV, research surrounding the adoption of innovative health care procedures suggests that the process of adopting BVDV control programs has a social element. Collegial interactions and discussions may be crucial in facilitating the systematic implementation necessary to optimize the long-term success of control programs. Compulsory control programs may be considered efficient and effective in some regions; however, in a nation where

  11. Soil-structure interaction Vol.3. Influence of ground water

    Energy Technology Data Exchange (ETDEWEB)

    Costantino, C J

    1986-04-01

    This study has been performed for the Nuclear Regulatory Commission (NRC) by the Structural Analysis Division of Brookhaven National Laboratory (BNL). The study was conducted during the fiscal year 1965 on the program entitled 'Benchmarking of Structural Engineering Problems' sponsored by NRC. The program considered three separate but complementary problems, each associated with the soil-structure interaction (551) phase of the seismic response analysis of nuclear plant facilities. The reports, all entitled Soil-Structure Interaction, are presented in three separate volumes, namely: Vol. 1 Influence of Layering by AJ Philippacopoulos, Vol. 2 Influence of Lift-Off by C.A. Miller, Vol. 3 Influence of Ground Water by C.J. Costantino. The two problems presented in Volumes 2 and 3 were conducted at the City University of New York (CUNY) under subcontract to BNL. This report, Volume 3 of the report, presents a summary of the first year's effort on the subject of the influence of foundation ground water on the SSI phenomenon. A finite element computer program was developed for the two-phased formulation of the combined soil-water problem. This formulation is based on the Biot dynamic equations of motion for both the solid and fluid phases of a typical soil. Frequency dependent interaction coefficients were generated for the two-dimensional plane problem of a rigid surface footing moving against a saturated linear soil. The results indicate that interaction coefficients are significantly modified as compared to the comparable values for a dry soil, particularly for the rocking mode of response. Calculations were made to study the impact of the modified interaction coefficients on the response of a typical nuclear reactor building. The amplification factors for a stick model placed atop a dry and saturated soil were computed. It was found that pore water caused the rocking response to decrease and translational response to increase over the frequency range of interest, as

  12. Process control program development

    International Nuclear Information System (INIS)

    Dameron, H.J.

    1985-01-01

    This paper details the development and implementation of a ''Process Control Program'' at Duke Power's three nuclear stations - Oconee, McGuire, and Catawba. Each station is required by Technical Specification to have a ''Process Control Program'' (PCP) to control all dewatering and/or solidification activities for radioactive wastes

  13. Toy Control Program evaluation.

    Science.gov (United States)

    Stewart, H A; Ormond, C; Seeger, B R

    1991-08-01

    The Toy Control Program for the Apple IIe microcomputer is a software and hardware package developed for the training of single-switch scanning skills. The specially designed scanning programs provide on screen visual feedback and activate a battery-powered toy to reinforce performance. This study examined whether the training of preschool subjects in single-switch scanning skills with the Toy Control Program would result in increased task completion scores and increased levels of attention to task, as compared with conditions of toy activation only and microcomputer programs with screen reinforcement only. The results showed that the subjects paid significantly more attention to the toys as reinforcers (p less than .01). No significant difference was found for the performance results of the three conditions. These findings support the use of a program like the Toy Control Program, which integrates the instructional capabilities of a computer with the reinforcement potential of a toy and the creativity of a therapist.

  14. STECH VOL5 (1) FEBRUARY, 2016

    African Journals Online (AJOL)

    Copyright 1AARR 2012-2016: www.afrrevjo.net

    STECH VOL 5 (1) FEBRUARY, 2016. Vol. 5 (1), S/No11, February, 2016: 1-13 ..... Knowledge produce is an act of discovery which involves exploring, analyzing .... Architectural Research, Elsevier: Higher Education Press Limited Company.

  15. Joyo progress report, vol. 8

    International Nuclear Information System (INIS)

    1983-01-01

    Following Joyo Reactor Technology Progress Reports (Vol. 1 to Vol. 7), the name was changed to Joyo Progress Report from this volume, and the activities concerning the fast breeder experimental reactor Joyo as a whole are to be reported as quarterly report. In the fast breeder experimental reactor Joyo, the change to the core for irradiation (MK-2) from the core for breeding (MK-1) was carried out since January, 1982, in order to utilize the reactor as an irradiation facility for the development of fuel and materials. The main work was the construction of the core for irradiation by exchanging 290 fuel elements, and the exchange of upper and lower guide pipes for control rods, the reconstruction of the driving mechanism, the installation of standby neutron detector system, the acceptance and inspection of new fuel, and the transfer of spent fuel between pools were carried out. As scheduled, the core for irradiation attained the initial criticality on November 22, and the works of constructing the core were completed on December 23, 1982. Thereafter, the 100 MW performance test was begun. Various experience and valuable data were obtained in the regular inspection and the maintenance and repair works carried out at the same time, regarding the operation and maintenance of the Joyo facilities. (Kako, I.)

  16. 51. Meeting of the Chemical Societies: Almanac of Contributions, Vol. Program, 1, 2, 3, 4 Molecular Models (Workshop); 51. Zjazd chemickych spolocnosti: Zbornik prispevkov, Diel: Program, 1, 2, 3, 4 Molekulove modely (Workshop)

    Energy Technology Data Exchange (ETDEWEB)

    Uher, M [ed.; Dept. of Org. Chem., Slovak Techn. Univ., Bratislava (Slovakia); Benes, P [ed.; Dept. Nucl. Chem., Czech Techn. Univ., Prague (Czech Republic); Carsky, J [ed.; Inst. of Med. Chem., Biochem. and Clin. Biochem., Comenius Univ., Bratislava (Slovakia); Ctrnactova, H [ed.; Dept. of Educat. and Didactics of Chem., Charles Univ., Prague (Czech Republic); Fecenko, J [ed.; Dept. of Agricult. Chem. and Susten. of Veget., Slovak Agricult. Univ., Nitra (Slovakia); Fellner, P [ed.; Dept. of Inorg. Chem., Slovak Techn. Univ., Bratislava (Slovakia); Hodul, P [ed.; Dept. of Fibres and Textile, Slovak Techn. Univ., Bratislava (Slovakia); Koprda, V [ed.; Dept. of Envir., Slovak Techn. Univ., Bratislava (Slovakia); Kratochvil, B [ed.; Inst. of. Solid State Chem., Chem. Univ., Prague (Czech Republic); Krkoska, P [ed.; Dept. of Chem. Technol. of Wood, Pulp and Paper, Slovak Techn. Univ., Bratislava (Slovakia); Kuruc, J [ed.; Dept. of Nucl. Chem., Comenius Univ., Bratislava (Slovakia); Lehotay, J [ed.; Dept. of Anal. Chem., Slovak Techn. Univ., Bratislava (Slovakia); Matousek, J [ed.; Inst. of Chem. and Technol. of the Envir., Techn. Univ, Brno (Czech Republic); Milichovsky, P [ed.; Dept. of Chem. Techn. of Wood, Pulp and Paper, Univ. Pardubice, Pardubice (Czech Republic); Omastova, M [ed.; Inst. of Polym., SAS, Bratislava (Slovakia); Petrus, L jr; Petrus, L sr [eds.; Inst. of Chem., SAS, Bratislava (Slovakia); Salisova, M [ed.; Dept. of Org. Chem., Comenius Univ., Bratislava (Slovakia); Schwendt, P [ed.; Dept. of Inorg. Chem., Comenius Univ., Bratislava (Slovakia); Silny, P; Sevcik, P; Toma, S [eds.; Comenius Univ., Bratislava (Slovakia); Uherova, R [ed.; Slovak Techn. Univ., Bratislava (Slovakia); Vanek, L [ed.; Charles Univ., Prague (Czech Republic); Zachar, P [ed.; Chem. Univ., Prague (Czech Republic)

    1999-09-01

    The publication has been set up as a abstracts of the meeting dealing with different chemical problems. The book (Vol. 1) consists of the sections: All-plenary lectures (9 papers); (D) History of the chemistry (14); (K) Didactics of chemistry (32); The book (Vol. 2) consists of the sections: (A) Analytical chemistry (48); (B) Inorganic chemistry (75); (C) Physical chemistry (27); (F) Nuclear chemistry and radioecology (12); (L) Environmental chemistry and toxicology (33); (M) Agricultural chemistry (20). The book (Vol. 3) consists of the sections: (E) Wood, pulp, paper (15); (G) Macromolecular chemistry (42); (H) Organic chemistry, bio-organic chemistry and pharmaceutical chemistry (96); (I) Food chemistry and biochemistry (34); (J) Textile, fibres and foil materials (9). The book (Vol. 4) consists of the workshop Molecular models (3 papers)

  17. Angra nuclear plant - environmental control program

    International Nuclear Information System (INIS)

    Kircher, E.; Cruz, E.S. da

    1989-01-01

    The pre-operational studies, that were elaborated before the beginning of Angra I Power Plant operation, are described in particular the environmental radiological safety area till the fuel loading in the core reactor. Several aspects are included, as socio-economic survey, seismological analysis, Meteorological Program, marine biology, water cooling system, exposure measures of natural radiation, marine sediments characterization in the effluent dispersion area and Environmental Radiological Monitoring Program. The main environmental programs developed for the operational phase of the Angra I Plant are also presented, citing some considerations about the Meteorological Program, Marine Biology Control Program, Temperature and Chlorine Control in Piraquara de Fora Bay, Radiological Environmental Monitoring Program, Sanitary Effluent Control Program and Radiological Emergency Program. (C.G.C.). 2 refs

  18. 'tomo_display' and 'vol_tools': IDL VM Packages for Tomography Data Reconstruction, Processing, and Visualization

    Science.gov (United States)

    Rivers, M. L.; Gualda, G. A.

    2009-05-01

    One of the challenges in tomography is the availability of suitable software for image processing and analysis in 3D. We present here 'tomo_display' and 'vol_tools', two packages created in IDL that enable reconstruction, processing, and visualization of tomographic data. They complement in many ways the capabilities offered by Blob3D (Ketcham 2005 - Geosphere, 1: 32-41, DOI: 10.1130/GES00001.1) and, in combination, allow users without programming knowledge to perform all steps necessary to obtain qualitative and quantitative information using tomographic data. The package 'tomo_display' was created and is maintained by Mark Rivers. It allows the user to: (1) preprocess and reconstruct parallel beam tomographic data, including removal of anomalous pixels, ring artifact reduction, and automated determination of the rotation center, (2) visualization of both raw and reconstructed data, either as individual frames, or as a series of sequential frames. The package 'vol_tools' consists of a series of small programs created and maintained by Guilherme Gualda to perform specific tasks not included in other packages. Existing modules include simple tools for cropping volumes, generating histograms of intensity, sample volume measurement (useful for porous samples like pumice), and computation of volume differences (for differential absorption tomography). The module 'vol_animate' can be used to generate 3D animations using rendered isosurfaces around objects. Both packages use the same NetCDF format '.volume' files created using code written by Mark Rivers. Currently, only 16-bit integer volumes are created and read by the packages, but floating point and 8-bit data can easily be stored in the NetCDF format as well. A simple GUI to convert sequences of tiffs into '.volume' files is available within 'vol_tools'. Both 'tomo_display' and 'vol_tools' include options to (1) generate onscreen output that allows for dynamic visualization in 3D, (2) save sequences of tiffs to disk

  19. Crisis Communication (Handbooks of Communication Science Vol. 23)

    DEFF Research Database (Denmark)

    Johansen, Winni

    Vol. 23 - The Handbook of Communication Science General editors: Peter J. Schultz and Paul Cobley......Vol. 23 - The Handbook of Communication Science General editors: Peter J. Schultz and Paul Cobley...

  20. Environmental Restoration Program Control Management System

    International Nuclear Information System (INIS)

    Duke, R.T.

    1992-01-01

    Environmental Restoration managers need to demonstrate that their programs are under control. Unlike most industrial programs, the public is heavily involved in Environmental Restoration activities. The public is demanding that the country prove that real progress is being made towards cleaning up the environment. A Program Control Management System can fill this need. It provides a structure for planning, work authorization, data accumulation, data analysis and change control. But it takes time to implement a control system and the public is losing its patience. This paper describes critical items essential to the quick development and implementation of a successful control system

  1. 75 FR 9691 - Review of the Commission's Program Access Rules and Examination of Programming Tying Arrangements

    Science.gov (United States)

    2010-03-03

    ... involving programming they own, that impede competition in the video distribution market. See H.R. Rep. No... availability of programming and charging discriminatory prices to non- cable technologies.'' H.R. Rep. No. 102... Access Rules and Examination of Programming Tying Arrangements; Final Rule #0;#0;Federal Register / Vol...

  2. ORELA data acquisition system hardware. Vol 4. ORELA device controllers (Q-5098)

    International Nuclear Information System (INIS)

    Reynolds, J.W.; Wintenberg, R.E.

    1977-01-01

    A report is given describing the programming, word formats, control signals, voltage levels, connector layouts, ground isolation, and a theory of operation with a simplified logic diagram for the Oak Ridge Electron Linear Accelerator (ORELA) Device Controllers. The ORELA Isolated Pulse Generators are also described

  3. Development on the High-throughput Vol-oxidizer for Decladding and Voloxidation of Spent Fuel Rod-cuts

    International Nuclear Information System (INIS)

    Kim, Young Hwang; Jung, Jae Hoo; Kim, Ki Ho; Park, Byung Buk; Lee, Hyo Jik; Kim, Sung Hyun; Park, Hee Sung; Lee, Jong Kwang; Kim, Ho Dong

    2009-12-01

    A high-throughput vol-oxidizer which can handle a several ten kg HM/batch is being developed to supply U 3 O 8 powders to an electrolytic reduction reactor in pyro-processing. At the first year step(2007), for enhancement of oxidation and recovery rate, we analyzed the mechanical and chemical methods, and devised the main mechanism with ball drop methods and rotary kiln type. Also, the main devices for oxidation and recovery of rod-cuts were designed by using the Solid Works and COSMOS program tools, and manufactured after thermal/mechanical analysis. In order to verify the main devices, simulation fuels(W 90%+SiO 2 10%) were manufactured and the main devices were tested for the oxidation and recovery rate of its. Here the expansion ratio of simulation fuel is similar to U 3 O 8 (2.7). At the second year step(2008), with the constant ration of rod-cuts volume and expansion ratio of U 3 O 8 (2.7), we produced a theoretical equation that can estimate the volume of rod-cuts according to a variation of their weight and lengths. We considered various materials such as ceramics and Ni-Cr, finally, the APM material which can constantly maintain against high temperature(1,200 .deg. C) and vacuum(1 torr) was selected and a vol-oxidizer was designed. At the third year step(2009), in order to manufacture a high-throughput vol-oxidizer, we have analyzed the vol-oxidizer for remote operability and maintainability, also the remote assembling and disassembling possibilities of the selected modules have been analyzed in terms of visibility, interference, approach, weight, and so on. We have presented final modular design and manufactured a high-throughput vol-oxidizer. Also, we have conducted the blank, heating(over 500 .deg. C) and hull separation test(capacity : 50 kg HM/batch, hull length 50mm) on the high-throughput vol-oxidizer. Also, these design technologies for the high-throughput vol-oxidizer will be utilized in the development of a more efficient vol-oxidizer with higher

  4. Program Baseline Change Control Board charter

    International Nuclear Information System (INIS)

    1993-02-01

    The purpose of this Charter is to establish the Program Baseline Change Control Board (PBCCB) for the Office of Civilian Radioactive Waste Management (OCRWM) Program, and to describe its organization, responsibilities, and basic methods of operation. Guidance for implementing this Charter is provided by the OCRWM Baseline Management Plan (BMP) and OCRWM Program Baseline Change Control Procedure

  5. Advances in boundary elements. Vol. 1-3

    International Nuclear Information System (INIS)

    Brebbia, C.A.; Connor, J.J.

    1989-01-01

    This book contains some of the edited papers presented at the 11th Boundary Element Conference, held in Cambridge, Massachusetts, during August 1989. The papers are arranged in three different books comprising the following topics: Vol. 1: Computations and Fundamentals - comprises sections on fundamentals, adaptive techniques, error and convergence, numerical methods and computational aspects. (283 p.). Vol. 2: Field and fluid flow solutions - includes the following topics: potential problems, thermal studies, electrical and electromagnetic problems, wave propagation, acoustics and fluid flow. (484 p.). Vol. 3: Stress analysis - deals with advances in linear problems, nonlinear problems, fracture mechanics, contact mechanics, optimization, geomechanics, plates and shells, vibrations and industrial applications. (450 p). (orig./HP)

  6. 15 CFR 752.11 - Internal Control Programs.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Internal Control Programs. 752.11... COMPREHENSIVE LICENSE § 752.11 Internal Control Programs. (a) Scope—(1) Introduction. It is through Internal Control Programs (ICPs) that the SCL holder and the consignee assure that exports and reexports are not...

  7. MANHATTAN DISTRICT HISTORY PROJECT Y THE LOS ALAMOS PROJECT VOL. I INCEPTION UNTIL AUGUST 1945

    Energy Technology Data Exchange (ETDEWEB)

    Hawkins, D.

    1961-12-01

    THESE TWO VOLUMES CONSTITUTE A RECORD OF THE TECHNICAL, ADMINISTRATIVE , AND POLICY-MAKING ACTIVITIES OF THE LOS ALAMOS PROJECT (PROJECT Y) FROM ITS INCEPTION UNDER THE MANHATTAN DISTRICT THROUGH THE DEVELOPMENT OF THE ATOMIC BOMB (VOL. I), AND DURING THE PERIOD FOLLOWING THE END OF WORLD WAR II UNTIL THE MANHATTAN DISTRICT RELINQUISHED CONTROL TO THE ATOMIC ENERGY COMMISSION AS OF JANUARY 1947 (VOL. II). ALTHOUGH SECURITY REGULATIONS HAVE REQUIRED SOME DELETIONS IN THE ORIGINAL TEXT OF THE TWO VOLUMES, EVERY EFFORT HAS BEEN MADE TO RETAIN THE ORIGINAL LANGUAGE AND EXPRESSIONS OF THE AUTHORS.

  8. A Guide to Program Planning Vol. II.

    Science.gov (United States)

    Allen, Earl, Sr.

    This booklet is a simplified guide for program planning and is intended to complement a somewhat lengthier companion booklet on program evaluation. It spells out in outline fashion the basic elements and steps involved in the planning process. Brief sections focus in turn on different phases of the planning process, including problem…

  9. Continuing Medical Education - Vol 27, No 1 (2009)

    African Journals Online (AJOL)

    Continuing Medical Education - Vol 27, No 1 (2009). Journal Home > Archives > Vol 27, No 1 (2009). Log in or Register to get access to full text downloads. ... Addiction treatment · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. R Meyer ...

  10. Computer program CDCID: an automated quality control program using CDC update

    International Nuclear Information System (INIS)

    Singer, G.L.; Aguilar, F.

    1984-04-01

    A computer program, CDCID, has been developed in coordination with a quality control program to provide a highly automated method of documenting changes to computer codes at EG and G Idaho, Inc. The method uses the standard CDC UPDATE program in such a manner that updates and their associated documentation are easily made and retrieved in various formats. The method allows each card image of a source program to point to the document which describes it, who created the card, and when it was created. The method described is applicable to the quality control of computer programs in general. The computer program described is executable only on CDC computing systems, but the program could be modified and applied to any computing system with an adequate updating program

  11. A background to risk analysis. Vol. 4

    International Nuclear Information System (INIS)

    Taylor, J.R.

    1979-01-01

    This 4-volumes report gives a background of ideas, principles, and examples which might be of use in developing practical methods for risk analysis. Some of the risk analysis techniques described are somewhat experimental. The report is written in an introductory style, but where some point needs further justification or evaluation, this is given in the form of a chapter appendix. In this way, it is hoped that the report can serve two purposes, - as a basis for starting risk analysis work and as a basis for discussing effectiveness of risk analysis procedures. The report should be seen as a preliminary stage, prior to a program of industrial trials of risk analysis methods. Vol. 4 treats human error in plant operation. (BP)

  12. A background to risk analysis. Vol. 2

    International Nuclear Information System (INIS)

    Taylor, J.R.

    1979-01-01

    This 4-volumes report gives a background of ideas, principles and examples which might be of use in developing practical methods for risk analysis. Some of the risk analysis techniques described are somewhat experimental. The report is written in an introductory style, but where some point needs further justification or evaluation, this is given in the form of a chapter appendix. In this way, it is hoped that the report can serve two purposes, - as a basis for starting risk analysis work and as a basis for discussing effectiveness of risk analysis procedures. The report should be seen as a preliminary stage, prior to a program of industrial trials of risk analysis methods. Vol. 2 treats generic methods of qualitative failure analysis. (BP)

  13. Measurement control program at model facility

    International Nuclear Information System (INIS)

    Schneider, R.A.

    1984-01-01

    A measurement control program for the model plant is described. The discussion includes the technical basis for such a program, the application of measurement control principles to each measurement, and the use of special experiments to estimate measurement error parameters for difficult-to-measure materials. The discussion also describes the statistical aspects of the program, and the documentation procedures used to record, maintain, and process the basic data

  14. International Journal of Humanistic Studies - Vol 3 (2004)

    African Journals Online (AJOL)

    International Journal of Humanistic Studies - Vol 3 (2004). Journal Home > Archives > Vol 3 (2004). Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register · Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives. DOWNLOAD FULL TEXT ...

  15. Auditing measurement control programs

    International Nuclear Information System (INIS)

    Roberts, F.P.; Brouns, R.J.

    1979-10-01

    Requirements and a general procedure for auditing measurement control programs used in special nuclear material accounting are discussed. The areas of measurement control that need to be examined are discussed and a suggested checklist is included to assist in the preparation and performance of the audit

  16. A background risk analysis. Vol. 1

    International Nuclear Information System (INIS)

    Taylor, J.R.

    1979-01-01

    This 4-volumes report gives a background of ideas, principles, and examples which might be of use in developing practical methods for risk analysis. Some of the risk analysis techniques, described are somewhat experimental. The report is written in an introductory style, but where some point needs further justification or evaluation, this is given in the form of a chapter appendix. In this way, it is hoped that the report can serve two purposes, - as a basis for starting risk analysis work and as a basis for discussing effectiveness of risk analysis procedures. The report should be seen as a preliminary stage, prior to a program of industrial trials of risk analysis methods. Vol. 1 contains a short history of risk analysis, and chapters on risk, failures, errors and accidents, and general procedures for risk analysis. (BP)

  17. Dynamics of structures '89. Vol. 3

    International Nuclear Information System (INIS)

    1989-01-01

    The proceedings, comprising 3 volumes published by the Plzen Centre of the Czechoslovak Society for Science and Technology (Vol. 1 and 2) and by Skoda Works in Plzen (Vol. 3), contain 107 papers, out of which 8 fall within the INIS Subject Scope; these deal with problems related to the earthquake resistance of nuclear power plants. Attention is paid to the evaluation of seismic characteristics of nuclear power plant equipment, to the equipment testing and to calculations of its dynamic characteristics under simulated seismic stress. (Z.M.)

  18. Environmental Restoration Program Management Control Plan

    International Nuclear Information System (INIS)

    1991-09-01

    This Management Control Plan has been prepared to define the Energy Systems approach to managing its participation in the US DOE's Environmental Restoration (ER) Program in a manner consistent with DOE/ORO 931: Management Plan for the DOE Field Office, Oak Ridge, Decontamination and Decommissioning Program; and the Energy Systems Environmental Restoration Contract Management Plan (CMP). This plan discusses the systems, procedures, methodology, and controls to be used by the program management team to attain these objectives

  19. An ALARA-conscious hot particle control program

    International Nuclear Information System (INIS)

    Doolittle, W.W.; Bredvad, R.S.; Bevelacqua, J.J.

    1992-01-01

    In 1989 approximately twenty-five percent of the radiation dose received by the Point Beach Nuclear Plant (PBNP) Health Physics group was due to its hot particle control program. The Health Physics group initiated a review of the program with the objective of decreasing the dose expenditure for hot particle control while maintaining a high standard for hot particle detection and control. In this paper the methods and results of this evaluation are described. The components of the hot particle control program, rules of thumb, and radionuclide composition at PBNP are presented

  20. 18 CFR 12.40 - Quality control programs.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Quality control... PROJECT WORKS Other Responsibilities of Applicant or Licensee § 12.40 Quality control programs. (a... meeting any requirements or standards set by the Regional Engineer. If a quality control program is...

  1. 75 FR 15893 - Tire Fuel Efficiency Consumer Information Program

    Science.gov (United States)

    2010-03-30

    ... how much the proposed consumer information program would affect consumer tire purchasing behavior and... 575 Tire Fuel Efficiency Consumer Information Program; Final Rule #0;#0;Federal Register / Vol. 75, No... 2127-AK45 Tire Fuel Efficiency Consumer Information Program AGENCY: National Highway Traffic Safety...

  2. 77 FR 46805 - Small Business Innovation Research Program Policy Directive

    Science.gov (United States)

    2012-08-06

    ... Vol. 77 Monday, No. 151 August 6, 2012 Part II Small Business Administration 13 CFR Chapter I Small Business Innovation Research Program Policy Directive; Small Business Technology Transfer Program Policy Directive; Small Business Innovation Research (SBIR) Program and Small Business Technology...

  3. Vol 41 No 2

    African Journals Online (AJOL)

    Esem

    3 Centre for Primary Care Research. Medical Journal of Zambia, Vol. 41, No. 2: 59 - 64 (2014) ... pollutants by inhaling second-hand tobacco smoke are at risk of adverse health ..... To put the measured PM levels into perspective, a. 2.5. 5.

  4. 12-EEASA-Vol 22.indd

    African Journals Online (AJOL)

    jenny

    2006-02-22

    Feb 22, 2006 ... Southern African Journal of Environmental Education, Vol. .... To this end, a planning conference on environmental .... mathematics, physics, chemistry, biology, geography, agriculture, home economics and human and.

  5. MANHATTAN DISTRICT HISTORY PROJECT Y THE LOS ALAMOS PROJECT VOL. II AUGUST 1945 THROUGH DECEMBER 1946

    Energy Technology Data Exchange (ETDEWEB)

    Truslow, E. C.; Smith, R. C.

    1961-12-01

    THESE TWO VOLUMES CONSTITUTE A RECORD OF THE TECHNICAL, ADMINISTRATIVE , AND POLICY-MAKING ACTIVITIES OF THE LOS ALAMOS PROJECT (PROJECT Y) FROM ITS INCEPTION UNDER THE MANHATTAN DISTRICT THROUGH THE DEVELOPMENT OF THE ATOMIC BOMB (VOL. I), AND DURING THE PERIOD FOLLOWING THE END OF WORLD WAR II UNTIL THE MANHATTAN DISTRICT RELINQUISHED CONTROL TO THE ATOMIC ENERGY COMMISSION AS OF JANUARY 1947 (VOL. II). ALTHOUGH SEC URITY REGULATIONS HAVE REQUIRED SOME DELETIONS IN THE ORIGINAL TEXT OF THE TWO VOLUMES, EVERY EFFORT HAS BEEN MADE TO RETAIN THE ORIGINAL LANGUGAGE AND EXPERSSIONS OF THE AUTHORS.

  6. AEC controlled area safety program

    Energy Technology Data Exchange (ETDEWEB)

    Hendricks, D W [Nevada Operations Office, Atomic Energy Commission, Las Vegas, NV (United States)

    1969-07-01

    The detonation of underground nuclear explosives and the subsequent data recovery efforts require a comprehensive pre- and post-detonation safety program for workers within the controlled area. The general personnel monitoring and environmental surveillance program at the Nevada Test Site are presented. Some of the more unusual health-physics aspects involved in the operation of this program are also discussed. The application of experience gained at the Nevada Test Site is illustrated by description of the on-site operational and safety programs established for Project Gasbuggy. (author)

  7. AEC controlled area safety program

    International Nuclear Information System (INIS)

    Hendricks, D.W.

    1969-01-01

    The detonation of underground nuclear explosives and the subsequent data recovery efforts require a comprehensive pre- and post-detonation safety program for workers within the controlled area. The general personnel monitoring and environmental surveillance program at the Nevada Test Site are presented. Some of the more unusual health-physics aspects involved in the operation of this program are also discussed. The application of experience gained at the Nevada Test Site is illustrated by description of the on-site operational and safety programs established for Project Gasbuggy. (author)

  8. Communication Dependent Control of Multi-Vehicle Formations

    Science.gov (United States)

    2016-05-11

    On Maximizing the Second Smallest Eigen- value of a State-Dependent Graph Laplacian,” IEEE Transactions on Au- tomatic Control, vol. 51, no. 1, pp...Collective Motion With Limited Communication,” IEEE Transactions on Au- tomatic Control, vol. 53, no. 3, pp. 706–719, 2008. [Online]. Available: http

  9. Radiological control technician: Training program management manual

    International Nuclear Information System (INIS)

    1992-10-01

    This manual defines and describes the DOE Radiological Control Technician Core Training Program qualification and training process, material development requirements, standards and policies, and administration. The manual applies to Radiological Control Technician Training Programs at all DOE contractor sites

  10. Index to Nuclear Safety. A technical progress review by chronology, permuted title, and author. Vol. 11, No. 1 through Vol. 15, No. 6

    International Nuclear Information System (INIS)

    Cottrell, W.B.; Klein, A.

    1975-04-01

    This issue of the Index to Nuclear Safety covers only articles included in Nuclear Safety, Vol. 11, No. 1, through Vol. 15, No. 6. This index is presented in three sections as follows: Chronological List of Articles by Volume; Permuted Title (KWIC) Index; and Author Index. (U.S.)

  11. Automatic control of commercial computer programs

    International Nuclear Information System (INIS)

    Rezvov, B.A.; Artem'ev, A.N.; Maevskij, A.G.; Demkiv, A.A.; Kirillov, B.F.; Belyaev, A.D.; Artem'ev, N.A.

    2010-01-01

    The way of automatic control of commercial computer programs is presented. The developed connection of the EXAFS spectrometer automatic system (which is managed by PC for DOS) is taken with the commercial program for the CCD detector control (which is managed by PC for Windows). The described complex system is used for the automation of intermediate amplitude spectra processing in EXAFS spectrum measurements at Kurchatov SR source

  12. Economic and Policy Review - Vol 13, No 3 (2007)

    African Journals Online (AJOL)

    Economic and Policy Review - Vol 13, No 3 (2007). Journal Home > Archives > Vol 13, No 3 ... Snagging the wheel of progress: Corruption, New anti-corruption drive and Nigeria\\'s quest for development. S B Kura ... Book Review: challenges of African growth opportunities, constraints and strategic directions. S I Owualah ...

  13. A quality control program for radiation sources

    International Nuclear Information System (INIS)

    Almeida, C.E. de; Sibata, C.H.; Cecatti, E.R.; Kawakami, N.S.; Alexandre, A.C.; Chiavegatti Junior, M.

    1982-01-01

    An extensive quality control program was established covering the following areas: physical parameters of the therapeutical machines, dosimetric standards, preventive maintenance of radiation sources and measuring instruments. A critical evaluation of this program was done after two years (1977-1979) of routine application and the results will be presented. The fluctuation on physical parameters strongly supports the efforts and cost of a quality control program. This program has certainly improved the accuracy required on the delivery of the prescribed dose for radiotherapy treatment. (Author) [pt

  14. Zede Journal - Vol 29 (2012)

    African Journals Online (AJOL)

    Journal Home > Archives > Vol 29 (2012) ... Leakage aware hardware and stochastic power scheduling for smart mobile devices ... Energy efficient topology for Wireless Mesh Networks · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  15. A background to risk analysis. Vol. 3

    International Nuclear Information System (INIS)

    Taylor, J.R.

    1979-01-01

    This 4-volumes report gives a background of ideas, principles, and examples which might be of use in developing practical methods for risk analysis. Some of the risk analysis techniques described are somewhat experimental. The report is written in an introductory style, but where some point needs further justifi- cation or evaluation, this is given in the form of a chapter appenix. In this way, it is hoped that the report can serve two purposes, - as a basis for starting risk analysis work and as a basis for discussing effectiveness of risk analysis procedures. The report should be seen as a preliminary stage, prior to a program of industrial trials of risk analysis methods. Vol. 3 contains chapters on quantification of risk, failure and accident probability, risk analysis and design, and examles of risk analysis for process plant. (BP)

  16. 78 FR 28953 - William D. Ford Federal Direct Loan Program

    Science.gov (United States)

    2013-05-16

    .... Ford Federal Direct Loan Program; Interim Final Rule #0;#0;Federal Register / Vol. 78, No. 95... [Docket ID ED-2013-OPE-0066] RIN 1840-AD13 William D. Ford Federal Direct Loan Program AGENCY: Office of... Secretary amends the William D. Ford Federal Direct Loan Program (Direct Loan Program) regulations to...

  17. DOE Radiological Control Manual Core Training Program

    International Nuclear Information System (INIS)

    Scott, H.L.; Maisler, J.

    1993-01-01

    Over the past year, the Department of Energy (DOE) Office of Health (EH-40) has taken a leading role in the development of new standardized radiological control training programs for use throughout the DOE complex. The Department promulgated its Radiological Control (RadCon) Manual in June 1992. To ensure consistent application of the criteria presented in the RadCon Manual, standardized radiological control core training courses and training materials have been developed for implementation at all DOE facilities. In producing local training programs, standardized core courses are to be supplemented with site-specific lesson plans, viewgraphs, student handbooks, qualification standards, question banks, and wallet-sized training certificates. Training programs for General Employee Radiological Training, Radiological Worker I and II Training, and Radiological Control Technician Training have been disseminated. Also, training committees under the direction of the Office of Health (EH-40) have been established for the development of additional core training courses, development of examination banks, and the update of the existing core training courses. This paper discusses the current activities and future direction of the DOE radiological control core training program

  18. International congress on forest decline research: State of knowledge and perspectives. Vol. 1. Proceedings

    International Nuclear Information System (INIS)

    Ulrich, B.

    1989-01-01

    In the two lecture volumes of the Proceedings of the International Congress on Forest Decline Research the papers are presented according to the topics of the plenary and poster sessions. The sessions had been devoted to the damage symptoms in forest decline, to the main stressors (atmosphere, climate, soil, biota), to the effects of the stressors (on rhizosphere, on decomposers, and on plants) (see vol. 1), to case studies (in Germany and abroad), to regional comparisons, to critical loads, and to silvicultural measures (see vol. 2). Additionally personal impressions about the forest decline phenomen in Germany and its causes and opinions about the perspective in regard to research needs, to silvicultural practices and to emission control are given. (orig./vhe)

  19. International congress on forest decline research: State of knowledge and perspectives. Vol. 2. Proceedings

    International Nuclear Information System (INIS)

    Ulrich, B.

    1989-01-01

    In the two lecture volumes of the Proceedings of the International Congress on Forest Decline Research the papers are presented according to the topics of the plenary and poster sessions. The sessions had been devoted to the damage symptoms in forest decline, to the main stressors (atmosphere, climate, soil, biota), to the effects of the stressors (on rhizosphere, on decomposers, and on plants) (see vol. 1), to case studies (in Germany and abroad), to regional comparisons, to critical loads, and to silvicultural measures (see vol. 2). Additionally personal impressions about the forest decline phenomen in Germany and its causes and opinions about the perspective in regard to research needs, to silvicultural practices and to emission control are given. (orig./vhe)

  20. AISI/DOE Advanced Process Control Program Vol. 3 of 6 Microstructure Engineering in Hot Strip Mills, Part 1 of 2: Integrated Mathematical Model

    Energy Technology Data Exchange (ETDEWEB)

    J.K. Brimacombe; I.V. Samarasekera; E.B. Hawbolt; T.R. Meadowcroft; M. Militzer; W.J. Pool; D.Q. Jin

    1999-07-31

    This report describes the work of developing an integrated model used to predict the thermal history, deformation, roll forces, microstructural evolution and mechanical properties of steel strip in a hot-strip mill. This achievement results from a joint research effort that is part of the American Iron and Steel Institute's (AIS) Advanced Process Control Program, a collaboration between the U.S. DOE and fifteen North American Steelmakers.

  1. Sensitivity Analysis of Linear Programming and Quadratic Programming Algorithms for Control Allocation

    Science.gov (United States)

    Frost, Susan A.; Bodson, Marc; Acosta, Diana M.

    2009-01-01

    The Next Generation (NextGen) transport aircraft configurations being investigated as part of the NASA Aeronautics Subsonic Fixed Wing Project have more control surfaces, or control effectors, than existing transport aircraft configurations. Conventional flight control is achieved through two symmetric elevators, two antisymmetric ailerons, and a rudder. The five effectors, reduced to three command variables, produce moments along the three main axes of the aircraft and enable the pilot to control the attitude and flight path of the aircraft. The NextGen aircraft will have additional redundant control effectors to control the three moments, creating a situation where the aircraft is over-actuated and where a simple relationship does not exist anymore between the required effector deflections and the desired moments. NextGen flight controllers will incorporate control allocation algorithms to determine the optimal effector commands and attain the desired moments, taking into account the effector limits. Approaches to solving the problem using linear programming and quadratic programming algorithms have been proposed and tested. It is of great interest to understand their relative advantages and disadvantages and how design parameters may affect their properties. In this paper, we investigate the sensitivity of the effector commands with respect to the desired moments and show on some examples that the solutions provided using the l2 norm of quadratic programming are less sensitive than those using the l1 norm of linear programming.

  2. Program Baseline Change Control Procedure

    International Nuclear Information System (INIS)

    1993-02-01

    This procedure establishes the responsibilities and process for approving initial issues of and changes to the technical, cost, and schedule baselines, and selected management documents developed by the Office of Civilian Radioactive Waste Management (OCRWM) for the Civilian Radioactive Waste Management System. This procedure implements the OCRWM Baseline Management Plan and DOE Order 4700.1, Chg 1. It streamlines the change control process to enhance integration, accountability, and traceability of Level 0 and Level I decisions through standardized Baseline Change Proposal (BCP) forms to be used by the Level 0, 1, 2, and 3 Baseline Change Control Boards (BCCBs) and to be tracked in the OCRWM-wide Configuration Information System (CIS) Database.This procedure applies to all technical, cost, and schedule baselines controlled by the Energy System Acquisition Advisory Board (ESAAB) BCCB (Level 0) and, OCRWM Program Baseline Control Board (PBCCB) (Level 1). All baseline BCPs initiated by Level 2 or lower BCCBs, which require approval from ESAAB or PBCCB, shall be processed in accordance with this procedure. This procedure also applies to all Program-level management documents controlled by the OCRWM PBCCB

  3. Guided Synthesis of Control Programs Using UPPAAL

    DEFF Research Database (Denmark)

    Hune, T.; Larsen, Kim Guldstrand; Pettersson, P.

    2000-01-01

    the transitions with extra guards. Applying this technique have made synthesis of control programs feasible for a plant producing as many as 60 batches. In comparison, we could only handle plants producing two batches without using guides. The synthesized control programs have been executed in a physical plant...

  4. samaru-main-vol 11 2011

    African Journals Online (AJOL)

    Library _info_Sc_ 1

    2004-07-11

    Jul 11, 2004 ... Samaru Journal of Information Studies Vol. 11 (1 & 2)2011 ... It is therefore paramount that the library ... source of primary and up to date information, both students and ... entertainment, arts, fashion, law, economy, medicine,.

  5. 7 CFR 58.141 - Alternate quality control program.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Alternate quality control program. 58.141 Section 58... Service 1 Quality Specifications for Raw Milk § 58.141 Alternate quality control program. When a plant has in operation an acceptable quality program, at the producer level, which is approved by the...

  6. Graphical programming: On-line robot simulation for telerobotic control

    International Nuclear Information System (INIS)

    McDonald, M.J.; Palmquist, R.D.

    1993-01-01

    Sandia has developed an advanced operational control system approach, caged Graphical Programming, to design and operate robotic waste cleanup and other hazardous duty robotic systems. The Graphical Programming approach produces robot systems that are faster to develop and use, safer in operation, and cheaper overall than altemative teleoperation or autonomous robot control systems. The Graphical Programming approach uses 3-D visualization and simulation software with intuitive operator interfaces for the programming and control of complex robotic systems. Graphical Programming Supervisor software modules allow an operator to command and simulate complex tasks in a graphic preview mode and, when acceptable, command the actual robots and monitor their motions with the graphic system. Graphical Progranuning Supervisors maintain registration with the real world and allow the robot to perform tasks that cannot be accurately represented with models alone by using a combination of model and sensor-based control. This paper describes the Graphical Programming approach, several example control systems that use Graphical Programming, and key features necessary for implementing successful Graphical Programming systems

  7. Vol 12, No 1 (2014)

    African Journals Online (AJOL)

    Egyptian Journal of Pediatric Allergy and Immunology (The) - Vol 12, No 1 (2014) ... The effect of serum angiotensin II and angiotensin II type 1 receptor gene ... with diabetic ketoacidosis · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  8. Angra nuclear plant - environmental control program; Usina Nuclear de Angra: programa de controle ambiental

    Energy Technology Data Exchange (ETDEWEB)

    Kircher, E; Cruz, E.S. da [FURNAS, Rio de Janeiro, RJ (Brazil)

    1990-12-31

    The pre-operational studies, that were elaborated before the beginning of Angra I Power Plant operation, are described in particular the environmental radiological safety area till the fuel loading in the core reactor. Several aspects are included, as socio-economic survey, seismological analysis, Meteorological Program, marine biology, water cooling system, exposure measures of natural radiation, marine sediments characterization in the effluent dispersion area and Environmental Radiological Monitoring Program. The main environmental programs developed for the operational phase of the Angra I Plant are also presented, citing some considerations about the Meteorological Program, Marine Biology Control Program, Temperature and Chlorine Control in Piraquara de Fora Bay, Radiological Environmental Monitoring Program, Sanitary Effluent Control Program and Radiological Emergency Program. (C.G.C.). 2 refs.

  9. Soil-structure interaction Vol.2. Influence of lift-off

    International Nuclear Information System (INIS)

    Miller, C.A.

    1986-04-01

    This study has been performed for the Nuclear Regulatory Commission (NRC) by the Structural Analysis Division of Brookhaven National Laboratory (BNL). The study was conducted during the fiscal year 1985 on the program entitled 'Benchmarking of Structural Engineering Problems' sponsored by NRC. The program considered three separate but complementary problems, each associated with the soil-structure interaction (SSI) phase of the seismic response analysis of nuclear plant facilities. The reports are presented in three separate volumes. The general title for the reports is 'Soil Structure Interaction' with the following subtitles: Vol. 1 Influence of Layering by A.J. Philippacopoulos, Vol. 2 Influence of Lift-Off by C.A. Miller, Vol. 3 Influence of Ground Water by C.J. Costantino. The two problems presented in Volumes 2 and 3 were conducted at the City University of New York (CUNY) under subcontract to BNL. This report, Volume 2 of the report, presents a summary of the work performed defining the influence liftoff has on the seismic response of nuclear power plant structures. The standard lumped parameter analysis method was modified by representing the lumped soil/structure interaction horizontal and rocking dampers with distributed (over the foundation area) springs and dampers. The distributed springs and dampers are then modified so that they can only transmit compressive stresses. Additional interaction damping is included to account for the energy dissipated as a portion of the foundation which has separated comes back into contact with the soil. The validity of the model is evaluated by comparing predictions made with it to data measured during the SIMQUAKE II experiment. The predictions were found to correlate quite well with the measured data except for some discrepancies at the higher frequencies (greater than 10 cps). This discrepancy was attributed to the relatively crude model used for impact effects. Data is presented which identifies the peak

  10. Measurement control program for nuclear material accounting

    International Nuclear Information System (INIS)

    Brouns, R.J.; Roberts, F.P.; Merrill, J.A.; Brown, W.B.

    1980-06-01

    A measurement control program for nuclear material accounting monitors and controls the quality of the measurments of special nuclear material that are involved in material balances. The quality is monitored by collecting data from which the current precision and accuracy of measurements can be evaluated. The quality is controlled by evaluations, reviews, and other administrative measures for control of selection or design of facilities, equipment and measurement methods and the training and qualification of personnel who perform SNM measurements. This report describes the most important elements of a program by which management can monitor and control measurement quality

  11. The advanced controls program at Oak Ridge National Laboratory

    International Nuclear Information System (INIS)

    Knee, H.E.; White, J.D.

    1990-01-01

    The Oak Ridge National Laboratory (ORNL), under sponsorship of the US Department of Energy (DOE), is conducting research that will lead to advanced, automated control of new liquid-metal-reactor (LMR) nuclear power plants. Although this program of research (entitled the ''Advanced Controls Program'') is focused on LMR technology, it will be capable of providing control design, test, and qualification capability for other advanced reactor designs (e.g., the advanced light water reactor [ALWR] and high temperature gas-cooled reactor [HTGR] designs), while also benefiting existing nuclear plants. The Program will also have applicability to complex, non-nuclear process control environments (e.g., petrochemical, aerospace, etc.). The Advanced Controls Program will support capabilities throughout the entire plant design life cycle, i.e., from the initial interactive first-principle dynamic model development for the process, systems, components, and instruments through advanced control room qualification. The current program involves five principal areas of research activities: (1) demonstrations of advanced control system designs, (2) development of an advanced controls design environment, (3) development of advanced control strategies, (4) research and development (R ampersand D) in human-system integration for advanced control system designs, and (5) testing and validation of advanced control system designs. Discussion of the research in these five areas forms the basis of this paper. Also included is a description of the research directions of the program. 8 refs

  12. Measurement control program for new special recovery

    International Nuclear Information System (INIS)

    Hsue, S.T.; Campbell, K.; Barlich, G.

    1987-04-01

    This report summarizes the design of the measurement control (MC) program for the New Special Recovery facility. The MC program is divided into two levels. Level 1 MC checks are performed at the individual instrument computer and will always be functional even when the instrument-control computer is down. The level 1 MCs are divided into statistical checks for both bias and precision, and diagnostic checks. All the instruments are connected on line to an instrument-control computer to which the measurement results can be communicated. Level 2 MC analyses are performed at this computer. The analyses consist of control charts for bias and precision and statistical tests used as analytic supplements to the control charts. They provide the desired detection sensitivity and yet can be interpreted quickly and easily. Recommendations are also made in terms of the frequency of the tests, the standard used, and other operational aspects of the MC program. 16 refs., 11 figs., 10 tabs

  13. Anestesia volátil e monitorização anestésica.

    OpenAIRE

    Alexandre, Nuno; Costa, Margarida; Mascarenhas, Ramiro

    2009-01-01

    Os autores apresentam um texto de apoio à disciplina de anestesiologia do curso de Medicina Veterinária .Neste texto são abordadas diversas temáticas da anestesia volátil tais como: equipamentos utilizados em anestesia volátil, farmacologia dos anestésicos voláteis. A monitorização dos pacientes é abordada na vertente mecânica ou intrumental e na componente básica.

  14. Index to Nuclear Safety: a technical progress review by chronology, permuted title, and author. Vol. 11(1)--Vol. 18(6)

    Energy Technology Data Exchange (ETDEWEB)

    Cottrell, W.B.; Klein, A.

    1978-04-11

    This index to Nuclear Safety covers articles published in Nuclear Safety, Vol. 11, No. 1 (January-February 1970), through Vol. 18, No. 6 (November-December 1977). It is divided into three sections: a chronological list of articles (including abstracts) followed by a permuted-title (KWIC) index and an author index. Nuclear Safety, a bimonthly technical progress review prepared by the Nuclear Safety Information Center (NSIC), covers all safety aspects of nuclear power reactors and associated facilities. Over 450 technical articles published in Nuclear Safety in the last eight years are listed in this index.

  15. Index to Nuclear Safety: a technical progress review by chronology, permuted title, and author. Vol. 11(1)--Vol. 18(6)

    International Nuclear Information System (INIS)

    Cottrell, W.B.; Klein, A.

    1978-01-01

    This index to Nuclear Safety covers articles published in Nuclear Safety, Vol. 11, No. 1 (January-February 1970), through Vol. 18, No. 6 (November-December 1977). It is divided into three sections: a chronological list of articles (including abstracts) followed by a permuted-title (KWIC) index and an author index. Nuclear Safety, a bimonthly technical progress review prepared by the Nuclear Safety Information Center (NSIC), covers all safety aspects of nuclear power reactors and associated facilities. Over 450 technical articles published in Nuclear Safety in the last eight years are listed in this index

  16. Ethiopian Journal of Health Sciences - Vol 28, No 2 (2018)

    African Journals Online (AJOL)

    Ethiopian Journal of Health Sciences - Vol 28, No 2 (2018). Journal Home > Archives > Vol 28, No 2 (2018). Log in or Register to get access to full text downloads. ... Prevalence of opportunistic intestinal parasites and associated factors among HIV patients while receiving ART at Arba Minch Hospital in southern Ethiopia: a ...

  17. Divison of Environmental Control Technology program, 1978

    International Nuclear Information System (INIS)

    1979-06-01

    This report covers Division of Environmental Control Technology projects in progress during FY 1978, within the Office of the Assistant Secretary for Environment, Department of Energy. It is the second in a planned series of annual reports. The Division of Environmental Control Technology (ECT) continues to support the Assistant Secretary for Environment (EV) in discharging two primary responsibilities: (1) under the Environmental Engineering (EE) Program, the independent overview and assessment of environmental control aspects of both the U.S. Department of Energy's (DOE) research, development, and demonstration (RD and D) programs and the Nation's energy policies, and (2) under the Decontamination and Decommissioning Program, the reduction of potential environmental hazards at the radioactively contaminated sites that are presently owned or were formerly used by the Government. This report presents a short summary of objectives, approach, progress and results, future plans, and a reference bibliography for each research, development, or assessment project within the program areas described above

  18. Divison of Environmental Control Technology program, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Mott, William E.

    1979-06-01

    This report covers Division of Environmental Control Technology projects in progress during FY 1978, within the Office of the Assistant Secretary for Environment, Department of Energy. It is the second in a planned series of annual reports. The Division of Environmental Control Technology (ECT) continues to support the Assistant Secretary for Environment (EV) in discharging two primary responsibilities: (1) under the Environmental Engineering (EE) Program, the independent overview and assessment of environmental control aspects of both the U.S. Department of Energy's (DOE) research, development, and demonstration (RD and D) programs and the Nation's energy policies, and (2) under the Decontamination and Decommissioning Program, the reduction of potential environmental hazards at the radioactively contaminated sites that are presently owned or were formerly used by the Government. This report presents a short summary of objectives, approach, progress and results, future plans, and a reference bibliography for each research, development, or assessment project within the program areas described above.

  19. Dynamics of structures '89. Vol. 1 and 2

    International Nuclear Information System (INIS)

    1989-01-01

    The proceedings, comprising 3 volumes published by the Plzen Centre of the Czechoslovak Society for Science and Technology (Vol. 1 and 2) and by Skoda Works in Plzen (Vol. 3), contain 107 papers, out of which 8 fall within the INIS Subject Scope; these deal with problems related to the earthquake resistance of nuclear power plants. Attention is paid to the evaluation of seismic characteristics of nuclear power plant equipment, to the equipment testing and to calculations of its dynamic characteristics under simulated seismic stress. (Z.M.)

  20. Large hadron collider workshop. Proceedings. Vol. 3

    International Nuclear Information System (INIS)

    Jarlskog, G.; Rein, D.

    1990-01-01

    The aim of the LHC workshop at Aachen was to discuss the 'discovery potential' of a high-luminosity hadron collider (the Large Hadron Collider) and to define the requirements of the detectors. Of central interest was whether a Higgs particle with mass below 1 TeV could be seen using detectors potentially available within a few years from now. Other topics included supersymmetry, heavy quarks, excited gauge bosons, and exotica in proton-proton collisions, as well as physics to be observed in electron-proton and heavy-ion collisions. A large part of the workshop was devoted to the discussion of instrumental and detector concepts, including simulation, signal processing, data acquisition, tracking, calorimetry, lepton identification and radiation hardness. The workshop began with parallel sessions of working groups on physics and instrumentaiton and continued, in the second half, with plenary talks giving overviews of the LHC project and the SSC, RHIC, and HERA programmes, summaries of the working groups, presentations from industry, and conclusions. Vol. 1 of these proceedings contains the papers presented at the plenary sessions, Vol. 2 the individual contributions to the physics sessions, and Vol. 3 those to the instrumentation sessions. (orig.)

  1. Large hadron collider workshop. Proceedings. Vol. 2

    International Nuclear Information System (INIS)

    Jarlskog, G.; Rein, D.

    1990-01-01

    The aim of the LHC workshop at Aachen was to discuss the 'discovery potential' of a high-luminosity hadron collider (the Large Hadron Collider) and to define the requirements of the detectors. Of central interest was whether a Higgs particle with mass below 1 TeV could be seen using detectors potentially available within a few years from now. Other topics included supersymmetry, heavy quarks, excited gauge bosons, and exotica in proton-proton collisions, as well as physics to be observed in electron-proton and heavy-ion collisions. A large part of the workshop was devoted to the discussion of instrumental and detector concepts, including simulation, signal processing, data acquisition, tracking, calorimetry, lepton identification and radiation hardness. The workshop began with parallel sessions of working groups on physics and instrumentation and continued, in the second half, with plenary talks giving overviews of the LHC project and the SSC, RHIC, and HERA programmes, summaries of the working groups, presentations from industry, and conclusions. Vol.1 of these proceedings contains the papers presented at the plenary sessions, Vol.2 the individual contributions to the physics sessions, and Vol.3 those to the instrumentation sessions. (orig.)

  2. Large hadron collider workshop. Proceedings. Vol. 1

    International Nuclear Information System (INIS)

    Jarlskog, G.; Rein, D.

    1990-01-01

    The aim of the LCH workshop at Aachen was to discuss the 'discovery potential' of a high-luminosity hadron collider (the Large Hadron Collider) and to define the requirements of the detectors. Of central interest was whether a Higgs particle with mass below 1 TeV could be seen using detectors potentially available within a few years from now. Other topics included supersymmetry, heavy quarks, excited gauge bosons, and exotica in proton-proton collisions, as well as physics to be observed in electron-proton and heavy-ion collisions. A large part of the workshop was devoted to the discussion of instrumental and detector concepts, including simulation, signal processing, data acquisition, tracking, calorimetry, lepton identification and radiation hardness. The workshop began with parallel sessions of working groups on physics and instrumentation and continued, in the second half, with plenary talks giving overviews of the LHC project and the SSC, RHIC, and HERA programmes, summaries of the working groups, presentations from industry, and conclusions. Vol. 1 of these proceedings contains the papers presented at the plenary sessions, Vol. 2 the individual contributions to the physics sessions, and Vol. 3 those to the instrumentation sessions. (orig.)

  3. Stochastic control theory dynamic programming principle

    CERN Document Server

    Nisio, Makiko

    2015-01-01

    This book offers a systematic introduction to the optimal stochastic control theory via the dynamic programming principle, which is a powerful tool to analyze control problems. First we consider completely observable control problems with finite horizons. Using a time discretization we construct a nonlinear semigroup related to the dynamic programming principle (DPP), whose generator provides the Hamilton–Jacobi–Bellman (HJB) equation, and we characterize the value function via the nonlinear semigroup, besides the viscosity solution theory. When we control not only the dynamics of a system but also the terminal time of its evolution, control-stopping problems arise. This problem is treated in the same frameworks, via the nonlinear semigroup. Its results are applicable to the American option price problem. Zero-sum two-player time-homogeneous stochastic differential games and viscosity solutions of the Isaacs equations arising from such games are studied via a nonlinear semigroup related to DPP (the min-ma...

  4. Overview of Japanese control rods development program

    International Nuclear Information System (INIS)

    Koyama, M.

    1984-01-01

    The Japanese control rods development program was established based on the fast breeder reactor program. Therefore, PNC's efforts have been made mainly for the development of analysis, design and fabrication technologies for ''JOYO'' and ''MONJU'' control rods. Laboratory studies were performed to obtain the information for absorber materials. The design and fabrication of the sealed and vented type control rod pins were completed, and water loop tests and in-sodium tests were carried out. Irradiation behavior of enriched B 4 C pellets with low and high density in DFR was examined. Japan's experimental fast reactor, JOYO, has been operated at the rated power of 50MWt and 75MWt since April 1977 when the MK-I core (breeder core) attained initial criticality. Post irradiation examinations on control rod, removed from the reactor, were carried out and their performance behavior were evaluated. In the MK-II core, a control rods monitoring program has been in investigation. Absorber Materials Irradiation Rigs (AMIR) are scheduled to be loaded and irradiated in the JOYO MK-II core from 1984. (author)

  5. Errata Resonance, Vol.20, No.12, 2015. Rajaram Nityananda, Sun ...

    Indian Academy of Sciences (India)

    IAS Admin

    Resonance, Vol.20, No.12, 2015. Rajaram Nityananda, Sun, Sky and Clouds: Where Light and Matter Meet. Page 1121: The correct Figure 5 is reproduced below: Resonance, Vol.20, No.11, 2015. Anil Kumar, Felix Bloch (1905–1983). Page 956: Para 1, Line 5, 'also from Zürich' should be read as 'from nearby Bern'.

  6. Assessment Of Schools In Agricultural Program As A Strategy For ...

    African Journals Online (AJOL)

    It is suggested that there is a need for government to develop partnership with private and non-governmental organizations for financial support specifically for rural youth agricultural programs. Keywords: Agricultural program, technology transfer, Poverty alleviation. Global Approaches to Extension Practice Vol. 2 (2) 2006: ...

  7. 78 FR 65767 - Student Assistance General Provisions, Federal Perkins Loan Program, Federal Family Education...

    Science.gov (United States)

    2013-11-01

    ... Assistance General Provisions, Federal Perkins Loan Program, Federal Family Education Loan Program, and... Provisions, Federal Perkins Loan (Perkins Loan) Program, Federal Family Education Loan (FFEL) Program, and... Vol. 78 Friday, No. 212 November 1, 2013 Part II Department of Education 34 CFR Parts 668, 674...

  8. Information manager-2011-Vol 11

    African Journals Online (AJOL)

    Library _info_Sc_ 1

    The Information Manager Vol. ... extent while carrying out their duties on a daily basis. ... It concluded by admonishing librarians to brace up and keep pace ... Proper training should be given to .... used to information and communication technologies .... proficiency Skills .... analysis of the workplace and implementation of.

  9. Model-Checking Real-Time Control Programs

    DEFF Research Database (Denmark)

    Iversen, T. K.; Kristoffersen, K. J.; Larsen, Kim Guldstrand

    2000-01-01

    In this paper, we present a method for automatic verification of real-time control programs running on LEGO(R) RCX(TM) bricks using the verification tool UPPALL. The control programs, consisting of a number of tasks running concurrently, are automatically translated into the mixed automata model...... of UPPAAL. The fixed scheduling algorithm used by the LEGO(R) RCX(TM) processor is modeled in UPPALL, and supply of similar (sufficient) timed automata models for the environment allows analysis of the overall real-time system using the tools of UPPALL. To illustrate our technique for sorting LEGO(R) bricks...

  10. Index to Nuclear Safety. A technical progress review by chronology, permuted title, and author. Vol. 11, No. 1--Vol. 17, No. 6

    International Nuclear Information System (INIS)

    Cottrell, W.B.; Klein, A.

    1977-01-01

    This index to Nuclear Safety covers articles in Nuclear Safety Vol. 11, No. 1 (Jan.-Feb. 1970), through Vol. 17, No. 6 (Nov.-Dec. 1976). The index includes a chronological list of articles (including abstract) followed by KWIC and Author Indexes. Nuclear Safety, a bimonthly technical progress review prepared by the Nuclear Safety Information Center, covers all safety aspects of nuclear power reactors and associated facilities. The index lists over 350 technical articles in the last six years of publication

  11. Index to Nuclear Safety. A technical progress review by chronology, permuted title, and author. Vol. 11, No. 1--Vol. 17, No. 6

    Energy Technology Data Exchange (ETDEWEB)

    Cottrell, W.B.; Klein, A.

    1977-02-23

    This index to Nuclear Safety covers articles in Nuclear Safety Vol. 11, No. 1 (Jan.-Feb. 1970), through Vol. 17, No. 6 (Nov.-Dec. 1976). The index includes a chronological list of articles (including abstract) followed by KWIC and Author Indexes. Nuclear Safety, a bimonthly technical progress review prepared by the Nuclear Safety Information Center, covers all safety aspects of nuclear power reactors and associated facilities. The index lists over 350 technical articles in the last six years of publication.

  12. IADC's well control accreditation program

    International Nuclear Information System (INIS)

    Kropla, S.M.

    1997-01-01

    WellCAP is a well control accreditation program devised and implemented by the International Association of Drilling Contractors (IADC). It is a worldwide comprehensive system that defines a well control training curriculum, establishes minimum standards and recommends guidelines for course structure. The program began in mid-1993 and is viewed as a means for training institutions to demonstrate industry recognition to customers, contractors and local governments. Schools can apply to have their courses accredited. The accreditation system is administered by a review panel. The application process requires that the school perform a detailed review of its curriculum and operations and bring them in line with the WellCAP curriculum and accreditation criteria. Currently, more than 75 schools around the world have requested application materials for WellCAP. To date fifteen schools have been fully accredited

  13. Programming Programmable Logic Controller. High-Technology Training Module.

    Science.gov (United States)

    Lipsky, Kevin

    This training module on programming programmable logic controllers (PLC) is part of the memory structure and programming unit used in a packaging systems equipment control course. In the course, students assemble, install, maintain, and repair industrial machinery used in industry. The module contains description, objectives, content outline,…

  14. Flood Control Structures Research Program. Annotated Bibliography on Grade Control Structures

    Science.gov (United States)

    1991-09-01

    evaluating the effects of geology, geomorphology, soils, land use, and climate on runoff and sediment production from major source areas; (4...Otto, and ,t:iji, Ahmed. 1987. "Theoret- ical Flow Model for Drop Structures," -’. aulic ’ngineering, Proceed- ings of the 1987 National Confere’,ce on...Facilities for Unique Flood Problems," Journal of the-Waterways and Harbors Division, ASCE, Vol 97, No. WWI, pp 185-203. The unusual climatic

  15. Synthetic RNA Controllers for Programming Mammalian Cell Fate and Function

    Science.gov (United States)

    2015-11-04

    Final report for “Synthetic RNA controllers for programming mammalian cell fate and function” Principal Investigator: Christina D. Smolke...SUBTITLE Synthetic RNA controllers for programming mammalian cell fate and function 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER...Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18   2 Synthetic RNA controllers for programming mammalian cell fate and function Task 1

  16. AISI/DOE Advanced Process Control Program Vol. 3 of 6: Improved Liquid Steel Feeding for Slab Casters; FINAL

    International Nuclear Information System (INIS)

    Brent Isaacson; Mike Slepian; Thomas Richter

    1999-01-01

    This report describes the development, construction and testing of the Electromagnetic Valve System (EVS), conducted as a project entitled ''Improved Liquid Steel Feeding System for Slab Casters''. This program ran from November 1992 to January 1995. Many of the technical issues in bringing the EVS to the steel industry were identified and resolved during the course of the program. During this time, significant hardware improvements in Westinghouse's electromagnetic valve were made to easily integrate it with existing continuous casting processes,. An improved refractory nozzle was developed and tested which had superior thermal shock and anti-cracking performance. In addition, several trials were conducted with molten steel to verify the proof-of-principle of the electromagnetic valve and its auxiliary equipment. However, improvements in other conventional pouring technologies have greatly diminished the potential value of this project to the steel industry. A such, the program w as canceled by the American Iron and Steel Institute after the conclusion of Phase I

  17. NJB VOL.34 Original Lower.cdr

    African Journals Online (AJOL)

    important sources of renewable biological ... The plantain (Musa paradisiaca) and banana chemicals (Nowak et ... fermentable sugars available for bio-ethanol ..... peels. Afr. J. Biochem. Res. 9(9): 104 - 109. 70. Osho et al./ Nig. J. Biotech. Vol.

  18. Material control system simulator program reference manual

    Energy Technology Data Exchange (ETDEWEB)

    Hollstien, R.B.

    1978-01-24

    A description is presented of a Material Control System Simulator (MCSS) program for determination of material accounting uncertainty and system response to particular adversary action sequences that constitute plausible material diversion attempts. The program is intended for use in situations where randomness, uncertainty, or interaction of adversary actions and material control system components make it difficult to assess safeguards effectiveness against particular material diversion attempts. Although MCSS may be used independently in the design or analysis of material handling and processing systems, it has been tailored toward the determination of material accountability and the response of material control systems to adversary action sequences.

  19. Material control system simulator program reference manual

    International Nuclear Information System (INIS)

    Hollstien, R.B.

    1978-01-01

    A description is presented of a Material Control System Simulator (MCSS) program for determination of material accounting uncertainty and system response to particular adversary action sequences that constitute plausible material diversion attempts. The program is intended for use in situations where randomness, uncertainty, or interaction of adversary actions and material control system components make it difficult to assess safeguards effectiveness against particular material diversion attempts. Although MCSS may be used independently in the design or analysis of material handling and processing systems, it has been tailored toward the determination of material accountability and the response of material control systems to adversary action sequences

  20. Controlled thermonuclear reactions and Tora Supra program

    International Nuclear Information System (INIS)

    1988-01-01

    The research programs for the nuclear energy production by means of thermonuclear fusion are shown. TORA SUPRA, Joint European Torus, Next European Torus and those developed at the Atomic Energy Center are described. The controlled fusion necessary conditions, the energy and confinement balance, and the research of a better tokamak configuration are discussed. A description of TORA SUPRA, the ways of achieving the project and the expected delays are shown. The Controlled Fusion Research Department functions, concerning these programs, are described. The importance of international cooperation and the perspectives about the use of controlled fusion are underlined [fr

  1. Controlled thermonuclear research program

    International Nuclear Information System (INIS)

    Anon.

    1976-01-01

    The Plasma Physics and Controlled-Fusion Research Program at the Lawrence Berkeley Laboratory is divided into five projects: Plasma Production and Heating Experiments, Plasma Theory, Atomic Physics Studies, the Tormac Project, and Neutral-Beam Development and Technology listed in order of increasing magnitude, as regards manpower and budget. Some cross sections and yields are shown in atomic physics

  2. Program, policy, and price interventions for tobacco control: quantifying the return on investment of a state tobacco control program.

    Science.gov (United States)

    Dilley, Julia A; Harris, Jeffrey R; Boysun, Michael J; Reid, Terry R

    2012-02-01

    We examined health effects associated with 3 tobacco control interventions in Washington State: a comprehensive state program, a state policy banning smoking in public places, and price increases. We used linear regression models to predict changes in smoking prevalence and specific tobacco-related health conditions associated with the interventions. We estimated dollars saved over 10 years (2000-2009) by the value of hospitalizations prevented, discounting for national trends. Smoking declines in the state exceeded declines in the nation. Of the interventions, the state program had the most consistent and largest effect on trends for heart disease, cerebrovascular disease, respiratory disease, and cancer. Over 10 years, implementation of the program was associated with prevention of nearly 36,000 hospitalizations, at a value of about $1.5 billion. The return on investment for the state program was more than $5 to $1. The combined program, policy, and price interventions resulted in reductions in smoking and related health effects, while saving money. Public health and other leaders should continue to invest in tobacco control, including comprehensive programs.

  3. Monitoring control program as a tool for regulatory control

    International Nuclear Information System (INIS)

    Silva Peres, Sueli da; Lauria, Dejanaira C.; Martins, Nadia S.F.; Rio, Monica A.P.

    2008-01-01

    Full text: The Institute of Radiation Protection and Dosimetry (IRD) of the Brazilian Commission of Nuclear Energy (CNEN) is responsible for developing, establishing and carrying out an independent assessment to verify the adequacy, effectiveness and accuracy of environmental radiological control carried out by licensed and controlled facilities. This independent assessment is performed by Environmental Monitoring Control Program (MCP). The MCP is a regulatory control and its main goal is to provide public and environment with an appropriate protection level against harmful effects of ionising radiation. The main purpose of the MCP is to verify whether applicable requirements prescribed by legislation are met, the environmental radiological control of the facilities are adequate and effective and the facilities are able to generate valid measuring results. The MCP is carried out in order to evaluate the quality of environmental radiation monitoring programs (EMP) and the effectiveness of their implementation, sampling conditions in the field, changes of environmental aspects in the impact area, adequacy of and adherence to procedures established and other applicable documents, technical competence of the staff and the necessary resources to ensure the required quality of the EMP. The MCP has been performed by activities should include inspecting and auditing of several types of nuclear and radioactive facilities. The inspection programme include the joint sampling program (CCP). The aim of the CCP is to check data of environmental monitoring of operator. The MCP was implemented in 1994. Ever since several problems related to the environmental control performed by operator was identified. The most important of them include problems related to the preparation and analysis of environmental samples, training of personnel, necessary resources, adherence of procedures to the purpose of the monitoring, fulfillment of procedures established, adequacy of the EMP and EMP

  4. Central African Journal of Medicine - Vol 60, No 9-12 (2016)

    African Journals Online (AJOL)

    Central African Journal of Medicine - Vol 60, No 9-12 (2016). Journal Home > Archives > Vol 60, No 9-12 (2016). Supplementary Issue. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register · Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue ...

  5. Clinics in Mother and Child Health - Vol 5, No 1 (2008)

    African Journals Online (AJOL)

    Clinics in Mother and Child Health - Vol 5, No 1 (2008). Journal Home > Archives > Vol 5, No 1 (2008). Special Edition - Congress Abstracts. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register · Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue ...

  6. Proceedings of the Seventh Conference of Nuclear Sciences and Applications. Vol.1,2,3

    International Nuclear Information System (INIS)

    Aly, H.F.

    2000-01-01

    The publication has been set up as a textbook for nuclear sciences and applications vol.1: (1) radiochemistry; (2) radiation chemistry; (3) isotope production; (4) waste management; vol.2: (1) nuclear and reactor; (2) physics; (3) plasma physics; (4) instrumentation and devices; (5) trace and ultra trace analysis; (6) environmental; vol.3: (1) radiation protection; (2) radiation health hazards; (3) nuclear safety; (4) biology; (5) agriculture

  7. Proceedings of the Seventh Conference of Nuclear Sciences and Applications. Vol.1,2,3

    Energy Technology Data Exchange (ETDEWEB)

    Aly, H F [ed.

    2000-07-01

    The publication has been set up as a textbook for nuclear sciences and applications vol.1: (1) radiochemistry; (2) radiation chemistry; (3) isotope production; (4) waste management; vol.2: (1) nuclear and reactor; (2) physics; (3) plasma physics; (4) instrumentation and devices; (5) trace and ultra trace analysis; (6) environmental; vol.3: (1) radiation protection; (2) radiation health hazards; (3) nuclear safety; (4) biology; (5) agriculture.

  8. Radiotracers in medical applications, vols 1-2

    International Nuclear Information System (INIS)

    Rayudu, G.V.S.

    1983-01-01

    These volumes will serve as a basis for instruction and reference for professionals such as radiopharmaceutical chemists, radiopharmacologists, radiopharmacists, radiobiochemists, and others involved in the medical applications of radiotracers. Vol. I: Topics include radiohalogenated compounds, including radioiodine; Tc-labeled compounds; and in-house prepared radiopharmaceuticals. The charge particle range vs. energy in every element is tabulated for protons for cyclotrons users. Discussions are also provided on nonimaging radiotracer methods; 11 C, 13 N, 15 O, 67 Ga. 111 In, 75 Se, /SUP 123m/ Te compounds; radioactive noble gases; and miscellaneous radiotracers for imaging. Vol. II: Pertinent nuclear science data such as radiation dosimetry, radionuclide production modes, radionuclides for therapy, human experimentation regulations and consent forms, and radiotracer laboratory designs are presented

  9. Z Physics at LEP 1. Vol. 3

    International Nuclear Information System (INIS)

    Altarelli, G.; Kleiss, R.; Verzegnassi, C.

    1989-01-01

    The contents of this final report from the Workshop on Z Physics at LEP can be divided into two parts. The first part, comprising Vols. 1 and 2, is a relatively concise but fairly complete handbook on the physics of e + e - annihilation near the Z peak (with normal LEP luminosity and unpolarized beams, appropriate for the first phase of LEP operation). The second part (Vol. 3) is devoted to a review of the existing Monte Carlo event generators for LEP physics. A special effort has been made to co-ordinate the different parts of this report, with the aim of achieving a systematic and balanced review of the subject, rather than having simply a collection of separate contributions. (orig.)

  10. Z physics at LEP 1. Vol. 1

    International Nuclear Information System (INIS)

    Altarelli, G.; Kleiss, R.; Verzegnassi, C.

    1989-01-01

    The contents of this final report from the Workshop on Z Physics at LEP can be divided into two parts. The first part, comprising Vols. 1 and 2, is a relatively concise but fairly complete handbook on the physics of e + e - annihilation near the Z peak (with normal LEP luminosity and unpolarized beams, appropriate for the first phase of LEP operation). The second part (Vol. 3) is devoted to a review of the existing Monte Carlo event generators for LEP physics. A special effort has been made to co-ordinate the different parts of this report, with the aim of achieving a systematic and balanced review of the subject, rather than having simply a collection of separate contributions. (orig.)

  11. Employers should disband employee weight control programs.

    Science.gov (United States)

    Lewis, Alfred; Khanna, Vikram; Montrose, Shana

    2015-02-01

    American corporations continue to expand wellness programs, which now reach an estimated 90% of workers in large organizations, yet no study has demonstrated that the main focus of these programs-weight control-has any positive effect. There is no published evidence that large-scale corporate attempts to control employee body weight through financial incentives and penalties have generated savings from long-term weight loss, or a reduction in inpatient admissions associated with obesity or even long-term weight loss itself. Other evidence contradicts the hypothesis that population obesity rates meaningfully retard economic growth or manufacturing productivity. Quite the contrary, overscreening and crash dieting can impact employee morale and even harm employee health. Therefore, the authors believe that corporations should disband or significantly reconfigure weight-oriented wellness programs, and that the Affordable Care Act should be amended to require such programs to conform to accepted guidelines for harm avoidance.

  12. Control system design and analysis using the INteractive Controls Analysis (INCA) program

    Science.gov (United States)

    Bauer, Frank H.; Downing, John P.

    1987-01-01

    The INteractive Controls Analysis (INCA) program was developed at the Goddard Space Flight Center to provide a user friendly efficient environment for the design and analysis of linear control systems. Since its inception, INCA has found extensive use in the design, development, and analysis of control systems for spacecraft, instruments, robotics, and pointing systems. Moreover, the results of the analytic tools imbedded in INCA have been flight proven with at least three currently orbiting spacecraft. This paper describes the INCA program and illustrates, using a flight proven example, how the package can perform complex design analyses with relative ease.

  13. Theoretical and algorithmic advances in multi-parametric programming and control

    KAUST Repository

    Pistikopoulos, Efstratios N.; Dominguez, Luis; Panos, Christos; Kouramas, Konstantinos; Chinchuluun, Altannar

    2012-01-01

    This paper presents an overview of recent theoretical and algorithmic advances, and applications in the areas of multi-parametric programming and explicit/multi-parametric model predictive control (mp-MPC). In multi-parametric programming, advances include areas such as nonlinear multi-parametric programming (mp-NLP), bi-level programming, dynamic programming and global optimization for multi-parametric mixed-integer linear programming problems (mp-MILPs). In multi-parametric/explicit MPC (mp-MPC), advances include areas such as robust multi-parametric control, multi-parametric nonlinear MPC (mp-NMPC) and model reduction in mp-MPC. A comprehensive framework for multi-parametric programming and control is also presented. Recent applications include a hydrogen storage device, a fuel cell power generation system, an unmanned autonomous vehicle (UAV) and a hybrid pressure swing adsorption (PSA) system. © 2012 Springer-Verlag.

  14. Theoretical and algorithmic advances in multi-parametric programming and control

    KAUST Repository

    Pistikopoulos, Efstratios N.

    2012-04-21

    This paper presents an overview of recent theoretical and algorithmic advances, and applications in the areas of multi-parametric programming and explicit/multi-parametric model predictive control (mp-MPC). In multi-parametric programming, advances include areas such as nonlinear multi-parametric programming (mp-NLP), bi-level programming, dynamic programming and global optimization for multi-parametric mixed-integer linear programming problems (mp-MILPs). In multi-parametric/explicit MPC (mp-MPC), advances include areas such as robust multi-parametric control, multi-parametric nonlinear MPC (mp-NMPC) and model reduction in mp-MPC. A comprehensive framework for multi-parametric programming and control is also presented. Recent applications include a hydrogen storage device, a fuel cell power generation system, an unmanned autonomous vehicle (UAV) and a hybrid pressure swing adsorption (PSA) system. © 2012 Springer-Verlag.

  15. Intelligent Flight Control Simulation Research Program

    National Research Council Canada - National Science Library

    Stolarik, Brian

    2007-01-01

    ...). Under the program, entitled "Intelligent Flight Control Simulation Research Laboratory," a variety of technologies were investigated or developed during the course of the research for AFRL/VAC...

  16. Object oriented programming interfaces for accelerator control

    International Nuclear Information System (INIS)

    Hoff, L.T.

    1997-01-01

    Several years ago, the AGS controls group was given the task of developing software for the RHIC accelerator. Like the AGS, the RHIC control system needs to control and monitor equipment distributed around a relatively large geographic area. A local area network connects this equipment to a collection of UNIX workstations in a central control room. Similar software had been developed for the AGS about a decade earlier, but isn't well suited for RHIC use for a number of reasons. Rather than adapt the AGS software for RHIC use, the controls group opted to start with a clean slate. To develop software that would address the shortcomings of the AGS software, while preserving the useful features that evolved through years of use. A current trend in control system design is to provide an object oriented programming interface for application developers. This talk will discuss important aspects and features of object oriented application programming interfaces (APIs) for accelerator control systems, and explore why such interfaces are becoming the norm

  17. Salmonella Control Programs in Denmark

    DEFF Research Database (Denmark)

    Wegener, Henrik Caspar; Hald, Tine; Wong, Danilo Lo Fo

    2003-01-01

    We describe Salmonella control programs of broiler chickens, layer hens, and pigs in Denmark. Major reductions in the incidence of foodborne human salmonellosis have occurred by integrated control of farms and food processing plants. Disease control has been achieved by monitoring the herds...... and flocks, eliminating infected animals, and diversifying animals (animals and products are processed differently depending on Salmonella status) and animal food products according to the determined risk. In 2001, the Danish society saved U.S.$25.5 million by controlling Salmonella. The total annual...... Salmonella control costs in year 2001 were U.S.$14.1 million (U.S.$0.075/kg of pork and U.S.$0.02/kg of broiler or egg). These costs are paid almost exclusively by the industry. The control principles described are applicable to most industrialized countries with modern intensive farming systems....

  18. Scheduling and control of programs in the CICADA computer system for TFTR

    International Nuclear Information System (INIS)

    Christianson, G.B.; Sherrick, M.; Stark, W.

    1983-01-01

    The CICADA computer system is a network of super minicomputers for data acquisition, reduction, display and device control on the TFTR experiment. Human interaction with the CICADA system is accomplished by consoles offering color displays with a high degree of operator interaction with the computer system, and by interactive terminals offering a limited degree of operator interaction. The authors describe the software packages and data bases used to control the consoles and provide communication to an application program attached to a console. The console control program in its turn schedules the execution of control programs that furnish operating system interfaces to applications programs executing at a console or terminal (in response to human activation), or upon activation by scheduling tasks. The control programs handle functions such as applications task activation. They discuss the implementation of the control programs in the multi-computer CICADA environment, and describe the control program data bases. In a TFTR shot cycle, applications programs must be scheduled for activation at operator-defined stages, in order to accomplish the arming of hardware devices, acquisition of summary waveform data, and the acquisition and archiving of raw data. The authors describe the software tasks and data bases of the CICADA event system, which accomplishes this scheduling of applications task activation in conjunction with the control programs. Future enhancements planned for the console control, program control, and event systems are outlined

  19. Proceedings of the 1. Arabic conference on chemical applications (Chemia 2). Vol. 2

    International Nuclear Information System (INIS)

    1997-11-01

    The conference of chemical application was held on 1-5 Nov 1997 in Cairo, This vol.2 contains of chemical application on nuclear materials. Studies on these vol.This second volume covers papers presented on the subjects

  20. Active control versus recursive backstepping control of a chaotic ...

    African Journals Online (AJOL)

    ... than for the recursive backstepping controllers. However, the flexibility in the choice of the control laws for recursive backstepping design gives room for further improvement in its performance and enables it to achieve the goals of stabilization and tracking. Journal of the Nigerian Association of Mathematical Physics Vol.

  1. HEALS Hypertension Control Program: Training Church Members as Program Leaders.

    Science.gov (United States)

    Dodani, Sunita; Beayler, Irmatine; Lewis, Jennifer; Sowders, Lindsey A

    2014-01-01

    Health disparities related to cardiovascular diseases (CVDs) including stroke have remained higher in the African-Americans (AAs) than in other populations. HEALS is a faith-based hypertension (HTN) control program modified according to AA community needs, and delivered by the church-lay members called church health advisors (CHAs). This study examined the feasibility and acceptability of training CHAs as HEALS program leaders. Four CHAs completed a 10-hour HEALS program training workshop at the Church, conducted by the nutrition experts. Workshop was evaluated by CHAs on their level of satisfaction, clarity of contents covered and comfort in delivery the program to the church congregation. The overall six main HEALS curriculum components were completed. Workshop was highly evaluated by CHAs on length of training, balance between content and skills development, and level of satisfaction with program delivery. Church-based culturally modified health promotion interventions conducted by the community lay members may be a way to reduce health disparities in ethnic minorities.

  2. 75 FR 36157 - Establishment of the Temporary Certification Program for Health Information Technology

    Science.gov (United States)

    2010-06-24

    ... Certification Program for Health Information Technology; Final Rule #0;#0;Federal Register / Vol. 75 , No. 121... Information Technology AGENCY: Office of the National Coordinator for Health Information Technology... certification program for the purposes of testing and certifying health information technology. This final rule...

  3. Index to Nuclear Safety. A technical progress review by chronology, permuted title, and author. Vol 11, No. 1 through Vol. 16, No. 6

    International Nuclear Information System (INIS)

    Cottrell, W.B.; Klein, A.

    1976-04-01

    This index to Nuclear Safety covers articles in Nuclear Safety Vol. 11, No. 1 (Jan.-Feb. 1970) through Vol. 16, No. 6 (Nov.-Dec. 1975). Included in the index is a chronological list of articles (including abstract) followed by both a KWIC index and an Author Index. Nuclear Safety is a bimonthly technical progress review prepared by the Nuclear Safety Information Center and covers all safety aspects of nuclear power reactors and associated facilities. The index lists over 300 technical articles in the last six years of publication

  4. Index to Nuclear Safety. A technical progress review by chronology, permuted title, and author. Vol 11, No. 1 through Vol. 16, No. 6

    Energy Technology Data Exchange (ETDEWEB)

    Cottrell, W.B.; Klein, A.

    1976-04-01

    This index to Nuclear Safety covers articles in Nuclear Safety Vol. 11, No. 1 (Jan.-Feb. 1970) through Vol. 16, No. 6 (Nov.-Dec. 1975). Included in the index is a chronological list of articles (including abstract) followed by both a KWIC index and an Author Index. Nuclear Safety is a bimonthly technical progress review prepared by the Nuclear Safety Information Center and covers all safety aspects of nuclear power reactors and associated facilities. The index lists over 300 technical articles in the last six years of publication.

  5. Performance expectations of measurement control programs

    International Nuclear Information System (INIS)

    Hammond, G.A.

    1985-01-01

    The principal index for designing and assessing the effectiveness of safeguards is the sensitivity and reliability of gauging the true status of material balances involving material flows, transfers, inventories, and process holdup. The measurement system must not only be capable of characterizing the material for gradation or intensity of protection, but also be responsive to needs for detection and localization of losses, provide confirmation that no diversion has occurred, and help meet requirements for process control, health and safety. Consequently, the judicious application of a measurement control and quality assurance program is vital to a complete understanding of the capabilities and limitations of the measurement system including systematic and random components of error for weight, volume, sampling, chemical, isotopic, and nondestructive determinations of material quantities in each material balance area. This paper describes performance expectations or criteria for a measurement control program in terms of ''what'' is desired and ''why'', relative to safeguards and security objectives

  6. Development of a Community Radiation Monitoring program near a nuclear industrial facility

    International Nuclear Information System (INIS)

    Pauley, B.J.; Maxwell, D.R.

    1992-01-01

    The Community Radiation Monitoring (ComRad) program is a cooperative effort of the DOE, Rocky Flats Office (RFO), EG ampersand G, and surrounding communities. The intent of the ComRad program is to establish radiation and meteorological monitoring stations in the communities for their independent control and use. The primary objectives of the ComRad program are to provide (1) public education, (2) active participation of the public, and (3) better community relations. The ComRad program involves establishing new offsite environmental surveillance stations to be operated and managed by local community science teachers. The general public will be invited to inspect the air quality instrumentation and results displayed. The instrumentation for each station will include a gamma counter, weather station, high-volume (Hi-Vol) air sampler, and thermoluminescent dosimeter (TLD). The purpose of this paper is to describe the operation of the ComRad program emphasizing program objectives, organizational responsibility, participation by community technical representatives, station managers and alternate station managers training, and data dissemination to the public

  7. Status of selected air pollution control programs, February 1992

    International Nuclear Information System (INIS)

    1992-02-01

    The collection of status reports has been prepared in order to provide a timely summary of selected EPA air pollution control activities to those individuals who are involved with the implementation of these programs. The report contains ozone/carbon monoxide (CO) programs; mobile sources programs; particulate matter nominally 10M and less (PM-10), sulfur dioxide (SO2) and lead programs; New Source Review (NSR); economics programs; emission standards programs; Indian activity programs; mobile sources programs; air toxics programs; acid rain programs; permits programs; chlorofluorocarbons programs; enforcement programs; and other programs

  8. A Performance Management Initiative for Local Health Department Vector Control Programs.

    Science.gov (United States)

    Gerding, Justin; Kirshy, Micaela; Moran, John W; Bialek, Ron; Lamers, Vanessa; Sarisky, John

    2016-01-01

    Local health department (LHD) vector control programs have experienced reductions in funding and capacity. Acknowledging this situation and its potential effect on the ability to respond to vector-borne diseases, the U.S. Centers for Disease Control and Prevention and the Public Health Foundation partnered on a performance management initiative for LHD vector control programs. The initiative involved 14 programs that conducted a performance assessment using the Environmental Public Health Performance Standards. The programs, assisted by quality improvement (QI) experts, used the assessment results to prioritize improvement areas that were addressed with QI projects intended to increase effectiveness and efficiency in the delivery of services such as responding to mosquito complaints and educating the public about vector-borne disease prevention. This article describes the initiative as a process LHD vector control programs may adapt to meet their performance management needs. This study also reviews aggregate performance assessment results and QI projects, which may reveal common aspects of LHD vector control program performance and priority improvement areas. LHD vector control programs interested in performance assessment and improvement may benefit from engaging in an approach similar to this performance management initiative.

  9. 76 FR 1261 - Establishment of the Permanent Certification Program for Health Information Technology

    Science.gov (United States)

    2011-01-07

    ... Certification Program for Health Information Technology; Final Rule #0;#0;Federal Register / Vol. 76, No. 5... Program for Health Information Technology AGENCY: Office of the National Coordinator for Health Information Technology, Department of Health and Human Services. ACTION: Final rule. SUMMARY: This final rule...

  10. Applied Research of Enterprise Cost Control Based on Linear Programming

    Directory of Open Access Journals (Sweden)

    Yu Shuo

    2015-01-01

    This paper researches the enterprise cost control through the linear programming model, and analyzes the restriction factors of the labor of enterprise production, raw materials, processing equipment, sales price, and other factors affecting the enterprise income, so as to obtain an enterprise cost control model based on the linear programming. This model can calculate rational production mode in the case of limited resources, and acquire optimal enterprise income. The production guiding program and scheduling arrangement of the enterprise can be obtained through calculation results, so as to provide scientific and effective guidance for the enterprise production. This paper adds the sensitivity analysis in the linear programming model, so as to learn about the stability of the enterprise cost control model based on linear programming through the sensitivity analysis, and verify the rationality of the model, and indicate the direction for the enterprise cost control. The calculation results of the model can provide a certain reference for the enterprise planning in the market economy environment, which have strong reference and practical significance in terms of the enterprise cost control.

  11. Effluent controls and environmental monitoring programs for uranium milling operations

    International Nuclear Information System (INIS)

    Maixner, R.D.

    1979-01-01

    Controls will reduce gaseous, particulate, and liquid discharges. Monitoring programs are used to determine effectiveness. The controls and programs discussed are used at Cotter Corporation's Canon City Mill in Colorado. 3 refs

  12. Economics of area-wide sit control programs

    International Nuclear Information System (INIS)

    Enkerlin, Walther

    2003-01-01

    The economic feasibility of using the sterile insect technique (SIT) to control certain key insect pests has been demonstrated clearly. The successful implementation of a number of area-wide and large-scale SIT programs has produced substantial economic benefits for the beneficiaries of the technology. The economic advantages of this technology will become more evident as indirect benefits of SIT application are incorporated into total program benefit estimates. Awareness of the technical and economic advantages of the SIT, and market forces favoring the use of environmentally clean pest control methods, will encourage private investment in this technology. (author)

  13. Control and evaluation programs for TANSY-KM5

    International Nuclear Information System (INIS)

    Grosshoeg, G.; Aronsson, D.; Hoek, M.; Rydz, R.; Norberg, L.; Urholm, L.

    1991-01-01

    Our first task was to purchase a computer and to create a basic software library for the preliminary test of the components. Our choice was a Starburst system from CES. The computer was a PDP-11/70 on a chip. It is the same computer as the ones used by the auxiliary CAMAC crate controllers in the TANSY system. However, the host has a 256 kbyte memory instead of the 64 kbyte memory used in the crate controllers. The operation system is RSX11-M. It is a real time system with properties suitable for laboratory works. However, the computer works in 64 kbyte partitions which limits the size of the programs. Four program systems were written. The two first were one-parameter systems for amplitude and time measurements using the ADCs and TDCs which later should be included in the TANSY system. These systems were supplemented with two two-parameter systems, one for time and amplitude measurements and one for time measurements on 16 detectors simultaneously. The display capabilities of these program systems have been used extensively by the TANSY programs. The programs needed for the manipulation of the system give the user a possibility to manually run the system without any intervention from the normal CODAS control system. The programs have been used for calibration measurements as well as test of the TANSY system. The evaluation programs use the output file from a normal measurement. The data file may be tested for errors. The true events can be sorted into different configurations. The final one is the neutron energy sort program, which gives the neutron energy distribution

  14. A stochastic programming approach to manufacturing flow control

    OpenAIRE

    Haurie, Alain; Moresino, Francesco

    2012-01-01

    This paper proposes and tests an approximation of the solution of a class of piecewise deterministic control problems, typically used in the modeling of manufacturing flow processes. This approximation uses a stochastic programming approach on a suitably discretized and sampled system. The method proceeds through two stages: (i) the Hamilton-Jacobi-Bellman (HJB) dynamic programming equations for the finite horizon continuous time stochastic control problem are discretized over a set of sample...

  15. Tank waste remediation system heat stress control program report, 1995

    International Nuclear Information System (INIS)

    Carls, D.R.

    1995-01-01

    Protecting employees from heat stress within tank farms during the summer months is challenging. Work constraints typically experienced in tank farms complicate the measures taken to protect employees from heat stress. TWRS-Industrial Hygiene (IH) has endeavored to control heat stress injuries by anticipating, recognizing, evaluating and controlling the factors which lead or contribute to heat stress in Tank Farms. The TWRS Heat Stress Control Program covers such areas as: employee and PIC training, communication of daily heat stress alerts to tank farm personnel, setting work/rest regimens, and the use of engineering and personal protective controls when applicable. The program has increased worker awareness of heat stress and prevention, established provisions for worker rest periods, increased drinking water availability to help ensure worker hydration, and allowed for the increased use of other protective controls to combat heat stress. The TWRS Heat Stress Control Program is the cornerstone for controlling heat stress among tank farm employees. The program has made great strides since it's inception during the summer of 1994. Some improvements can still be made to enhance the program for the summer of 1996, such as: (1) procurement and use of personal heat stress monitoring equipment to ensure appropriate application of administrative controls, (2) decrease the need for use of containment tents and anti-contamination clothing, and (3) providing a wider variety of engineering and personal protective controls for heat stress prevention

  16. A method of numerically controlled machine part programming

    Science.gov (United States)

    1970-01-01

    Computer program is designed for automatically programmed tools. Preprocessor computes desired tool path and postprocessor computes actual commands causing machine tool to follow specific path. It is used on a Cincinnati ATC-430 numerically controlled machine tool.

  17. Energy-efficient buildings program evaluations. Volume 2: Evaluation summaries

    Energy Technology Data Exchange (ETDEWEB)

    Lee, A.D.; Mayi, D.; Edgemon, S.D.

    1997-04-01

    This document presents summaries of code and utility building program evaluations reviewed as the basis for the information presented in Energy-Efficient Buildings Program Evaluations, Volume 1: Findings and Recommendations, DOE/EE/OBT-11569, Vol. 1. The main purpose of this volume is to summarize information from prior evaluations of similar programs that may be useful background for designing and conducting an evaluation of the BSGP. Another purpose is to summarize an extensive set of relevant evaluations and provide a resource for program designers, mangers, and evaluators.

  18. AJESMS_ Vol 8 2010 August 15 2011

    African Journals Online (AJOL)

    Prof. Mereku

    2010-08-15

    Aug 15, 2010 ... African Journal of Educational Studies in Mathematics and Sciences Vol. 8, 2010 ... environs, a mining area in Wassa West District of Ghana .... This finding is based on autopsy data and on reports showing that blood levels in.

  19. Water SA - Vol 30, No 3 (2004)

    African Journals Online (AJOL)

    Application of a residential end-use model for estimating cold and hot water demand ... of multistage filtration using different filter media against conventional water ... (Germs et al., 2004), published in the April 2004 (Vol 30 No 2) issue of Water ...

  20. Status of Pantex Plant Waste Management Project/program control system

    International Nuclear Information System (INIS)

    Price, Wesley J.; Matthews, William L.

    1992-01-01

    During a December 1990 Waste Management Program Review held in Albuquerque, New Mexico, the Waste Management and Operational Surety Division (WMOSD) introduced the project control system to be used for the Waste Management (WM) Operations Program. The system was entitled 'TRAC-WM' (Tracking and Control for Waste Management). The stated objective for this system was to establish a frame work for planning, managing, and controlling work within the WM program. As a result Mason and Hanger (the operating contractor at the Pantex Plant) initiated the development of a computerized waste management project tracking system. (author)

  1. ECONOMICS OF ALEXANDER THE GREAT (15 vols + 4 cdroms) by Gregory Zorzos

    OpenAIRE

    Gregory Zorzos

    2002-01-01

    Research contains many ancient texts (Ancient Greek, Hebrews, Hieroglyphs, Assyrian, Sumerian, Babylonian, Latin, etc.). 1. (MICRO-MACRO ECONOMICS OF ALEXANDER THE GREAT (5 vols + cdrom). Microeconomics and macroeconomics of Alexander the Great. Economic theories, feasibilities, economic plannings, general description of the campaign's business plan etc. 2. BANKS OF ALEXANDER THE GREAT (2 vols + cdrom) Describes banking system, economists, financiers, investors, accountants, bookkeepers, etc,...

  2. Nuclear materials control and accountability internal audit program

    International Nuclear Information System (INIS)

    Barham, M.A.; Abbott, R.R.

    1991-01-01

    This paper reports that the Department of Energy Order (DOE) 5633.3, Control and Accountability for Nuclear Materials, includes several requirements for development and implementation of an internal audit program. Martin Marietta Energy System, Inc., manages five sites in Tennessee, Kentucky, and Ohio for the DOE Field Office, Oak Ridge and has a Central Nuclear Materials Control and Accountability (NMC and A) Manager with matrixed responsibility for the NMC and A program at the five sites. The Energy Systems Central NMC and A Manager has developed an NMC and A Internal Audit Handbook which defines the functional responsibilities, performance criteria, and reporting and documentation requirements for the Energy Systems NMC and A Internal Audit Program. The initial work to develop and implement these standards was tested at the K-25 Site when the site hired an internal auditor to meet the DOE requirements for an NMC and A Internal Audit program

  3. Adaptive Dynamic Programming for Control Algorithms and Stability

    CERN Document Server

    Zhang, Huaguang; Luo, Yanhong; Wang, Ding

    2013-01-01

    There are many methods of stable controller design for nonlinear systems. In seeking to go beyond the minimum requirement of stability, Adaptive Dynamic Programming for Control approaches the challenging topic of optimal control for nonlinear systems using the tools of  adaptive dynamic programming (ADP). The range of systems treated is extensive; affine, switched, singularly perturbed and time-delay nonlinear systems are discussed as are the uses of neural networks and techniques of value and policy iteration. The text features three main aspects of ADP in which the methods proposed for stabilization and for tracking and games benefit from the incorporation of optimal control methods: • infinite-horizon control for which the difficulty of solving partial differential Hamilton–Jacobi–Bellman equations directly is overcome, and  proof provided that the iterative value function updating sequence converges to the infimum of all the value functions obtained by admissible control law sequences; • finite-...

  4. On a program manifold's stability of one contour automatic control systems

    Science.gov (United States)

    Zumatov, S. S.

    2017-12-01

    Methodology of analysis of stability is expounded to the one contour systems automatic control feedback in the presence of non-linearities. The methodology is based on the use of the simplest mathematical models of the nonlinear controllable systems. Stability of program manifolds of one contour automatic control systems is investigated. The sufficient conditions of program manifold's absolute stability of one contour automatic control systems are obtained. The Hurwitz's angle of absolute stability was determined. The sufficient conditions of program manifold's absolute stability of control systems by the course of plane in the mode of autopilot are obtained by means Lyapunov's second method.

  5. Gender and Behaviour - Vol 5, No 2 (2007)

    African Journals Online (AJOL)

    Gender and Behaviour. ... Gender and Behaviour - Vol 5, No 2 (2007) ... Home Type, Age and Gender on The Antisocial Behaviour of Secondary School Students. ... Gender-Wise Comparison on Emotional Intelligence and Marital Satisfaction.

  6. Afican Health Sciences Vol 10 No 4.pmd

    African Journals Online (AJOL)

    Administrator

    African Health Sciences Vol 10 No 4 December 2010. 353. Effect of ... Key words: Rumex steudelii, Antifertility, Folliculogenesis, Endometrium, uterus, ovary, ovarian follicles, corpus luteum,. Rats. ..... first cycle in intrauterine growth-related and.

  7. Preliminary evaluation of rotational Vol-oxidizer for hot cell operation - 5320

    International Nuclear Information System (INIS)

    Kim, Y.H.; Lee, J.W.; Cho, Y.Z.; Ahn, D.H.; Song, K.C.

    2015-01-01

    KAERI is developing a mechanical head-end process for pyro-processing. As a piece of the processing equipment, a vol-oxidizer that can handle several tens of kg of HM/batch is under development to supply U 3 O 8 powders to an electrolytic reduction (ER) reactor. To operate a vol-oxidizer in a hot cell, the reactor should be optimized by the mechanical design, and the vol-oxidizer should have a high hull recovery rate. In addition, a vol-oxidizer for hot cell demonstrations that handles the spent fuel of high radiation virulence in a limited space should have a small size and not scatter in its outlet. In this paper, we aim at a preliminary evaluation of a rotational vol-oxidizer for hot cell operation. To evaluate the preliminary situation, we produced a theoretical equation of an optimum reactor size, and verification tests were conducted using an acryl vessel and zircaloy-4 tube according to various weights and lengths. In addition, we predicted the terminal velocity of U 3 O 8 using the terminal velocity of SiO 2 , which will determine the optimum air flux, and through an oxidation experiment, we verified the theory form to detect the existence of U 3 O 8 powder in a discharge filter. In addition, hull separation tests were conducted using a reactor and hulls with a 50 kg HM/batch for the recovery rate of the hulls. The results indicate that we obtained an appropriate air flux so as to not cause U 3 O 8 powder dispersion from using a Stokes equation and density ratio equation prior to the demonstration. The optimum flow and experimental results of the hull separation test have been applied for the design of the demonstration oxidizer, and the operation conditions of the oxidizer were produced. (authors)

  8. Application oriented programming and control of industrial robots

    International Nuclear Information System (INIS)

    Nilsson, Klas.

    1992-07-01

    Efficient use of industrial robots requires a strong interplay between user level commands, the motion control system, and external equipment. It should also be possible for an experienced application engineer to tailor the motion control to a specific application in a convenient way, instead of deficient utilization of the device or tricky user programming which is often the case today. A layered software architecture has been designed based on an application oriented view, considering typical hardware and software constraints. The top layers or the architecture support improved integration of off-line programming with interactive teach-in programming. The proposed solution is based on a transformation of robot programs between an on-line and an off-line representation. A central part of the architecture is an intermediate software layer, allowing the experienced user to introduce application specific motion primitives, on top of the motion control system. Flexibility during system configuration combined with computing efficiency and performance at run-time is of major importance. The solution is based on so called actions, which are methods to be passed between different software layers. Such methods can be specification of nonlinear control parameters, application specific control strategies, or treatment of external sensor signals. The actions can be implemented efficiently even in the multiprocessor case by using relocatable executable pieces of code generated from a special cross-compilation strategy. The lowest layers, comprising the motion control, have to be efficient and still fit in with the upper layers. In these layers, software solutions include an external sensor interface and a concept of motion pipelining allowing sensor based motions to be partly computed in advance. An experimental platform, built around commercially available robots, has been developed to verify the proposed solutions. (au)

  9. Image quality and volume computed tomography air kerma index (C{sub vol}) evaluation in Recife; Avaliacao da qualidade de imagem e do indice volumetrico de Kerma ar em tomografia computadorizada (C{sub vol}) em Recife

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Marcos Ely Almeida

    2008-07-01

    The Computed Tomography (CT) is an important diagnostic imaging method, widely used. However, in spite of all the advantages and technologic advances within the CT scanners, the tomographic procedures result in high absorbed doses to patients. The main objective of this work was to perform a dosimetric study of CT scanners located at Recife and to evaluate the image quality on CT examinations in these equipment. The volume CT air kerma index (C{sub VOL}) and air kerma length product (P{sub KL,CT}) were estimated. These values were calculated using normalized weighted air kerma indexes in CT standard dosimetry phantoms ({sub n}C{sub W}), supplied by ImPACT group for several CT scanners, and the scan parameters of routine head, routine chest and hi-resolution chest CT exams performed at 20 institutions. The irradiation parameters of 15 adult patients for each CT procedure were registered at six participating centres, at which the phantom from the American College of Radiology (ACR) CT accreditation protocol was used for the image quality measurements. For routine head exams, the C{sub VOL} values varied between 12 and 58 mGy (at the posterior fossa) and 15 to 58 mGy (at the cerebrum) and the P{sub KL,CT}, from 150 to 750 mGy{center_dot}cm. The C{sub VOL} values for routine chest procedures varied from 3 to 26 mGy and the P{sub KL,CT}, between 120 and 460 mGy{center_dot}cm. In relation to Hi-resolution chest exams, C{sub VOL} values were from 1.0 to 2.7 mGy and the P{sub KL,CT} values varied between 24 and 67 mGy{center_dot}cm. The image quality evaluations results showed that almost all scanners presented at least one inadequacy. One of the equipment presented faults at 70% of the tests. With regard to the image noise, only two scanners presented acceptable results. From these results, it is possible to conclude that the volume CT air kerma index values are lower than the European reference levels. However, the image quality of these CT scanners does not attend the

  10. Workplace Setting of Mental Health Nursing Program Graduates in ...

    African Journals Online (AJOL)

    Rwanda Journal Series F: Medicine and Health Sciences Vol. 2 No. 2, 2015. Workplace Setting of Mental Health Nursing Program Graduates in Rwanda. Marie Claire Gasanganwa. 1. , Benoite Umubyeyi1, Darius Gishoma1. 1. University of Rwanda, College of Medicine and Health Sciences, Rwanda. Background.

  11. Tanzania Veterinary Journal - Vol 32, No 1 (2017)

    African Journals Online (AJOL)

    Tanzania Veterinary Journal - Vol 32, No 1 (2017) ... factors for porcine cysticercosis transmission and animal welfare in selected villages in Nyasa, Tanzania ... Thoracic radiographic anatomy in sheep · EMAIL FULL TEXT EMAIL FULL TEXT

  12. African Research Review - Vol 5, No 1 (2011)

    African Journals Online (AJOL)

    African Research Review - Vol 5, No 1 (2011) .... Gender and Occupational Preferences among Senior High School Students in Cross River State ... Academic Achievement in Physics · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  13. The value of partnerships in state obesity prevention and control programs.

    Science.gov (United States)

    Hersey, James; Kelly, Bridget; Roussel, Amy; Curtis, LaShawn; Horne, Joseph; Williams-Piehota, Pamela; Kuester, Sarah; Farris, Rosanne

    2012-03-01

    State health departments funded by the Centers for Disease Control and Prevention's Nutrition, Physical Activity, and Obesity Program collaborate with multiple partners to develop and implement comprehensive obesity prevention and control programs. A mixed-methods evaluation of 28 state programs over a 5-year period assessed states' progress on program requirements, including developing statewide partnerships and coordinating with partners to support obesity prevention and control efforts. States with greater partnership involvement leveraged more funding support for their programs, passed more obesity-related policies, and were more likely to implement obesity interventions in multiple settings. Case studies provided guidance for establishing and maintaining strong partnerships. Findings from this study offer emerging evidence to support assumptions about the centrality of partnerships to states' success in obesity program development and implementation and related health promotion activities.

  14. A user's guide to the Flexible Spacecraft Dynamics and Control Program

    Science.gov (United States)

    Fedor, J. V.

    1984-01-01

    A guide to the use of the Flexible Spacecraft Dynamics Program (FSD) is presented covering input requirements, control words, orbit generation, spacecraft description and simulation options, and output definition. The program can be used in dynamics and control analysis as well as in orbit support of deployment and control of spacecraft. The program is applicable to inertially oriented spinning, Earth oriented or gravity gradient stabilized spacecraft. Internal and external environmental effects can be simulated.

  15. Knowledge based system for control rod programming of BWRs

    International Nuclear Information System (INIS)

    Fukuzaki, Takaharu; Yoshida, Ken-ichi; Kobayashi, Yasuhiro

    1988-01-01

    A knowledge based system has been developed to support designers in control rod programming of BWRs. The programming searches through optimal control rod patterns to realize safe and effective burning of nuclear fuel. Knowledge of experienced designers plays the main role in minimizing the number of calculations by the core performance evaluation code. This code predicts power distibution and thermal margins of the nuclear fuel. This knowledge is transformed into 'if-then' type rules and subroutines, and is stored in a knowledge base of the knowledge based system. The system consists of working area, an inference engine and the knowledge base. The inference engine can detect those data which have to be regenerated, call those subroutine which control the user's interface and numerical computations, and store competitive sets of data in different parts of the working area. Using this system, control rod programming of a BWR plant was traced with about 500 rules and 150 subroutines. Both the generation of control rod patterns for the first calculation of the code and the modification of a control rod pattern to reflect the calculation were completed more effectively than in a conventional method. (author)

  16. Isolation of a library of aromadendranes from Landolphia dulcis and its characterization using the VolSurf approach

    DEFF Research Database (Denmark)

    Staerk, Dan; Skole, Brian; Jørgensen, Flemming Steen

    2004-01-01

    -energy structures obtained with the MMFF force field. VolSurf descriptors were calculated from the GRID maps and subsequently analyzed by multivariate statistics. The analysis disclosed the presence of a common motif for possible interactions of the aromadendranes with a putative target receptor. At the same time...... established by means of NMR methods including COSY, NOESY, HSQC, and HMBC experiments, supported by HRMS and optical rotation data. Virtual characterization of the aromadendrane library (1-9) was performed using chemoinformatics tools. 3D molecular fields were calculated with the GRID program using low...

  17. The first decade of the Massachusetts Tobacco Control Program.

    Science.gov (United States)

    Koh, Howard K; Judge, Christine M; Robbins, Harriet; Celebucki, Carolyn Cobb; Walker, Deborah K; Connolly, Gregory N

    2005-01-01

    This article provides a comprehensive overview of the first decade of the Massachusetts Tobacco Control Program (MTCP). Born after Massachusetts passed a 1992 ballot initiative raising cigarette excise taxes to fund the program, MTCP greatly reduced statewide cigarette consumption before being reduced to a skeletal state by funding cuts. The article describes the program's components and goals, details outcomes, presents a summary of policy accomplishments, and reviews the present status of MTCP in the current climate of national and state fiscal crises. The first decade of the MTCP offers many lessons learned for the future of tobacco control.

  18. Computer program for automatic generation of BWR control rod patterns

    International Nuclear Information System (INIS)

    Taner, M.S.; Levine, S.H.; Hsia, M.Y.

    1990-01-01

    A computer program named OCTOPUS has been developed to automatically determine a control rod pattern that approximates some desired target power distribution as closely as possible without violating any thermal safety or reactor criticality constraints. The program OCTOPUS performs a semi-optimization task based on the method of approximation programming (MAP) to develop control rod patterns. The SIMULATE-E code is used to determine the nucleonic characteristics of the reactor core state

  19. GLOBAL JOURNAL OF SOCIAL SCIENCES VOL 8, NO

    African Journals Online (AJOL)

    Ada

    GLOBAL JOURNAL OF SOCIAL SCIENCES VOL 8, NO. ... media. From the over fifty tertiary institutions in the country graduates are churned .... few were collected at the contact addresses, ... acquisition is paramount for successful job hunting.

  20. An improved instrument setpoint control program

    International Nuclear Information System (INIS)

    Cash, J.S. Jr.; George, R.T.; Kincaid, S.C.

    1991-01-01

    Instrument setpoints have a definite and often significant impact on plant safety, reliability, and availability. Although typically overshadowed by plant design, modification, and physical change activities, instrument setpoints can alter plant status and system operating characteristics just as significantly. Recognizing the need for a formal program that provides configuration control of instrument setpoints, provides a readily accessible and clearly documented basis for instrument setpoints, and integrates and coordinates operations, engineering, and maintenance activities that influence the basis for instrument setpoints, Philadelphia Electric Company (PECo) is developing an Improved Instrument Setpoint Control Program (IISCP) that incorporates current industry guidance and practices and state-of-the-art information systems technology. The IISCP was designed around PECo's then existing business processes for setpoint control, determination, and maintenance. A task force representing the various constituencies from both plants and the engineering and services organizations were formed to identify objectives and design features for the IISCP. Utilizing industry standards and guidance, regulatory documents, the experiences and good practices obtained from other utilities, and PECo's nuclear group strategies, objectives, and goals, specific objectives were identified to enhance the business processes

  1. AFRREV STECH, Vol. 3(1) February, 2014

    African Journals Online (AJOL)

    Toshiba

    Indexed African Journals Online: www.ajol.info. AFRREV STECH. An International Journal of Science and Technology. Bahir Dar, Ethiopia. Vol. 3 (1), S/No 6, February, 2014: 1-11. ISSN 2225-8612 (Print) ISSN 2227-5444 (Online). EFFECTS OF DEFORESTATION ON NATURAL. BIO-DIVERSITY IN DELTA NORTH ...

  2. 78 FR 9457 - Medicare, Medicaid, Children's Health Insurance Programs; Transparency Reports and Reporting of...

    Science.gov (United States)

    2013-02-08

    ... Parts 402 and 403 [CMS-5060-F] RIN 0938-AR33 Medicare, Medicaid, Children's Health Insurance Programs...'s Health Insurance Program (CHIP) to report annually to the Secretary certain payments or transfers... Vol. 78 Friday, No. 27 February 8, 2013 Part II Department of Health and Human Services Centers...

  3. Scalable control program for multiprecursor flow-type atomic layer deposition system

    Energy Technology Data Exchange (ETDEWEB)

    Selvaraj, Sathees Kannan [Department of Chemical Engineering, University of Illinois at Chicago, Chicago, Illinois 60607 (United States); Takoudis, Christos G., E-mail: takoudis@uic.edu [Department of Chemical Engineering, University of Illinois at Chicago, Chicago, Illinois 60607 and Department of Bioengineering, University of Illinois at Chicago, Chicago, Illinois 60607 (United States)

    2015-01-01

    The authors report the development and implementation of a scalable control program to control flow type atomic layer deposition (ALD) reactor with multiple precursor delivery lines. The program logic is written and tested in LABVIEW environment to control ALD reactor with four precursor delivery lines to deposit up to four layers of different materials in cyclic manner. The programming logic is conceived such that to facilitate scale up for depositing more layers with multiple precursors and scale down for using single layer with any one precursor in the ALD reactor. The program takes precursor and oxidizer exposure and purging times as input and controls the sequential opening and closing of the valves to facilitate the complex ALD process in cyclic manner. The program could be used to deposit materials from any single line or in tandem with other lines in any combination and in any sequence.

  4. African Health Sciences - Vol 15, No 4 (2015)

    African Journals Online (AJOL)

    African Health Sciences. ... African Health Sciences - Vol 15, No 4 (2015) .... H Madubedube, Andre P Kengne, Rajiv T Erasmus, Tahir S Pillay, Tandi E ... on lung function and cardiorespiratory fitness in both cigarette and hookah smokers.

  5. Model-based control strategies for systems with constraints of the program type

    Science.gov (United States)

    Jarzębowska, Elżbieta

    2006-08-01

    The paper presents a model-based tracking control strategy for constrained mechanical systems. Constraints we consider can be material and non-material ones referred to as program constraints. The program constraint equations represent tasks put upon system motions and they can be differential equations of orders higher than one or two, and be non-integrable. The tracking control strategy relies upon two dynamic models: a reference model, which is a dynamic model of a system with arbitrary order differential constraints and a dynamic control model. The reference model serves as a motion planner, which generates inputs to the dynamic control model. It is based upon a generalized program motion equations (GPME) method. The method enables to combine material and program constraints and merge them both into the motion equations. Lagrange's equations with multipliers are the peculiar case of the GPME, since they can be applied to systems with constraints of first orders. Our tracking strategy referred to as a model reference program motion tracking control strategy enables tracking of any program motion predefined by the program constraints. It extends the "trajectory tracking" to the "program motion tracking". We also demonstrate that our tracking strategy can be extended to a hybrid program motion/force tracking.

  6. PLC and DTAM Software Programs for Pumping Instrumentation and Control Skid N

    International Nuclear Information System (INIS)

    KOCH, M.R.

    2000-01-01

    This document describe the software programs for the Programmable Logic Controller and the Datable Access Module for Pumping Instrumentation and Control skid ''N''. The Appendices contains copies of the printouts of these software programs. This document describes the software programs for the Allen-Bradley SLC 500 programmable logic controller (PLC) and the Allen-Bradley DTAM PLUS operator interface module used on Pumping Instrumentation and Control (PIC) skid ''N''. The software programs for the SLC 500 and DTAM Plus are based on the core programs provided by Allen-Bradley. The PLC and DTAM software programs on skid ''D'' for SX-104 are the baseline programs. These baselines have been tailored for U-farm skids. The skid ''N'' program for U-109 is similar to the skid ''M'' program for U-102. An Acceptance Test Procedure (ATP) and an Operational Test Procedure (OTP) verify that the software programs meet the specific requirements for U-109 pumping. This document represents the final PLC and DTAM programs for PIC skid ''N'' at U-109. These programs were printed out after the performance of the OTP. The OTP acts as the final qualification test for the software programs. Functional requirements and details of the PLC ladder logic are described in this document. The final programs entered into the PLC and DTAM Plus are included as Appendices to this document

  7. Systematic control of large computer programs

    International Nuclear Information System (INIS)

    Goedbloed, J.P.; Klieb, L.

    1986-07-01

    A package of CCL, UPDATE, and FORTRAN procedures is described which facilitates the systematic control and development of large scientific computer programs. The package provides a general tool box for this purpose which contains many conveniences for the systematic administration of files, editing, reformating of line printer output files, etc. In addition, a small number of procedures is devoted to the problem of structured development of a large computer program which is used by a group of scientists. The essence of the method is contained in three procedures N, R, and X for the creation of a new UPDATE program library, its revision, and execution, resp., and a procedure REVISE which provides a joint editor - UPDATE session which combines the advantages of the two systems, viz. speed and rigor. (Auth.)

  8. African Health Sciences - Vol 13, No 2 (2013)

    African Journals Online (AJOL)

    African Health Sciences. ... African Health Sciences - Vol 13, No 2 (2013) ... S Musisi, D Akena, E Nakimuli-Mpungu, C Abbo, J Okello, 205-218 .... Alcohol consumption and cigarette smoking pattern among brothelbased female sex workers in ...

  9. Steam generator deposit control program assessment at Comanche Peak

    International Nuclear Information System (INIS)

    Stevens, J.; Fellers, B.; Orbon, S.

    2002-01-01

    Comanche Peak has employed a variety of methods to assess the effectiveness of the deposit control program. These include typical methods such as an extensive visual inspection program and detailed corrosion product analysis and trending. In addition, a recently pioneered technique, low frequency eddy current profile analysis (LFEC) has been utilized. LFEC provides a visual mapping of the magnetite deposit profile of the steam generator. Analysis of the LFEC results not only provides general area deposition rates, but can also provide local deposition patterns, which is indicative of steam generator performance. Other techniques utilized include trending of steam pressure, steam generator hideout-return, and flow assisted corrosion (FAC) results. The sum of this information provides a comprehensive assessment of the deposit control program effectiveness and the condition of the steam generator. It also provides important diagnostic and predictive information relative to steam generator life management and mitigative strategies, such as special cleaning procedures. This paper discusses the techniques employed by Comanche Peak Chemistry to monitor the effectiveness of the deposit control program and describes how this information is used in strategic planning. (authors)

  10. Expert system for control rod programming of boiling water reactors

    International Nuclear Information System (INIS)

    Fukuzaki, T.; Yoshida, K.; Kobayashi, Y.; Matsuura, H.; Hoshi, K.

    1986-01-01

    Control rod programming, one of the main tasks in reactor core management of boiling water reactors (BWRs), can be successfully accomplished by well-experienced engineers. By use of core performance evaluation codes, their knowledge plays the main role in searching through optimal control rod patterns and exposure points for adjusting notch positions and exchanging rod patterns. An expert system has been developed, based on a method of knowledge engineering, to lighten the engineer's load in control rod programming. This system utilizes an inference engine suited for planning/designing problems, and stores the knowledge of well-experienced engineers in its knowledge base. In this report, the inference engine, developed considering the characteristics of the control rod programming, is introduced. Then the constitution and function of the expert system are discussed

  11. Food and Nutrition Services Quality Control Management Program.

    Science.gov (United States)

    Wimsatt-Fraim, Teresa S.

    A program was conducted to improve the quality of food service through the training of 44 food and nutrition service employees in a 200-bed hospital. A 12-week quality control program was implemented to address four key areas: food temperatures, food accuracy, food quality, and dietary personnel. Learning strategies, emphasizing critical thinking…

  12. AJESMS Vol 9 2011 October 23 2012 final

    African Journals Online (AJOL)

    Owner

    2011-10-23

    Oct 23, 2011 ... African Journal of Educational Studies in Mathematics and Sciences Vol. ... alveolar re-circulation and gravity orientation are key factors in determining the ..... Comp. Biomed. Res. 3, pp 675-689. Pich, J. (1972). Theory of ...

  13. African Research Review - Vol 4, No 4 (2010)

    African Journals Online (AJOL)

    African Research Review - Vol 4, No 4 (2010) .... Educational Policy and Technological Development in Africa: An X-Ray of Problems and Solutions in the .... Tradition and Art Appreciation: A Boost to Cultural Tourism in Nigeria · EMAIL FREE ...

  14. PLC/DTAM Software Programs for Pumping Instrumentation and Control Skid ''L''

    International Nuclear Information System (INIS)

    KOCH, M.R.

    2000-01-01

    This document describes the software programs for the Programmable Logic Controller and the Data Table Access Module for Pumping Instrumentation and Control skid ''L''. The Appendices contains copies of the printouts of these software programs

  15. Modelación númerica de procesos de esterilización térmica de alimentos usando volúmenes de control: Aproximación cilíndrica./Numerical simulation of thermal sterilization process of foods using control volumes: Cylindrical aproximation.

    OpenAIRE

    Ciro Velásquez, Héctor José; González, Carlos; García, Eduardo

    2009-01-01

    Un proceso de esterilización térmica de alimentos fue modelado usando la técnica de diferenciación finita aplicada a volúmenes de control. El modelo de simulación fue desarrollado en coordenadas cilíndricas con un ejemplo de aplicación tomando como referencia un producto cárnico (carne de res). Los resultados de la simulación mostraron que el algoritmo desarrollado es independiente de la red nodal seleccionada, permitiendo cuantificar las curvas de penetración de calor en el punto crítico del...

  16. Dedicated Programming Language for Small Distributed Control Divices

    DEFF Research Database (Denmark)

    Madsen, Per Printz; Borch, Ole

    2007-01-01

    . This paper describes a new, flexible and simple language for programming distributed control tasks. The compiler for this language generates a target code that is very easy to interpret. A interpreter, that can be easy ported to different hardwares, is described. The new language is simple and easy to learn...... become a reality if each of these controlling computers can be configured to perform a cooperative task. This again requires the necessary communicating facilities. In other words this requires that all these simple and distributed computers can be programmed in a simple and hardware independent way...

  17. Physics at LEP2. Vol. 2

    International Nuclear Information System (INIS)

    Altarelli, G.; Sjoestrand, T.; Zwirner, F.

    1995-01-01

    This is final report of the Workshop on Physics at LEP2, held at CERN during 1995. The first part of vol. 1 is devoted to aspects of machine physics of particular relevance to experiments, including the energy, luminosity and interaction regions, as well as the measurement of beam energy. The second part of vol. 1 is a relatively concise, but fairly complete, handbook on the physics of e + e - annihilation above the WW threshold and up to √s∼200 GeV. It contains discussions on WW cross-sections and distributions, W mass determination, Standard Model processes, QCD and gamma-gamma physics, as well as aspects of discovery physics, such as Higgs, new particle searches, triple gauge boson couplings and Z'. The second volume contains a review of the existing Monte Carlo generators for LEP2 physics. These include generators for WW physics, QCD and gamma-gamma processes, Bhabha scattering and discovery physics. A special effort was made to co-ordinate the different parts, with a view to achieving a systematic and balanced review of the subject, rather than just publishing a collection of separate contributions. (orig.)

  18. Physics at LEP2. Vol. 1

    International Nuclear Information System (INIS)

    Altarelli, G.; Sjoestrand, T.; Zwirner, F.

    1996-01-01

    This is the final report of the Workshop on Physics at LEP2, held at CERN during 1995. The first part of vol. 1 is devoted to aspects of machine physics of particular relevance to experiments, including the energy, luminosity and interaction regions, as well as the measurement of beam energy. The second part of vol. 1 is a relatively concise, but fairly complete, handbook on the physics of e + e - annihilation above the WW threshold and up to √s∼200 GeV. It contains discussions on WW cross-sections and distributions, W mass determination, Standard Model processes, QCD and gamma-gamma physics, as well as aspects of discovery physics, such as Higgs, new particle searches, triple gauge boson couplings and Z'. The second volume contains a review of the existing Monte Carlo generators for LEP2 physics. These include generators for WW physics, QCD and gamma-gamma processes, Bhabha scattering and discovery physics. A special effort was made to co-ordinate the different parts, with a view to achieving a systematic and balanced review of the subject, rather than just publishing a collection of separate contributions. (orig.)

  19. Physics at LEP2. Vol. 2

    Energy Technology Data Exchange (ETDEWEB)

    Altarelli, G [ed.; Sjoestrand, T [ed.; Zwirner, F [ed.

    1995-02-19

    This is final report of the Workshop on Physics at LEP2, held at CERN during 1995. The first part of vol. 1 is devoted to aspects of machine physics of particular relevance to experiments, including the energy, luminosity and interaction regions, as well as the measurement of beam energy. The second part of vol. 1 is a relatively concise, but fairly complete, handbook on the physics of e{sup +}e{sup -} annihilation above the WW threshold and up to {radical}s{approx}200 GeV. It contains discussions on WW cross-sections and distributions, W mass determination, Standard Model processes, QCD and gamma-gamma physics, as well as aspects of discovery physics, such as Higgs, new particle searches, triple gauge boson couplings and Z`. The second volume contains a review of the existing Monte Carlo generators for LEP2 physics. These include generators for WW physics, QCD and gamma-gamma processes, Bhabha scattering and discovery physics. A special effort was made to co-ordinate the different parts, with a view to achieving a systematic and balanced review of the subject, rather than just publishing a collection of separate contributions. (orig.).

  20. The sheep blowfly genetic control program in Australia

    International Nuclear Information System (INIS)

    Foster, Geoffrey G.

    1989-01-01

    The blowfly Lucilia cuprina is the most important myiasis pet of sheep in Australia. Other species are associated with sheep myiasis, but L. cuprina is probably responsible for initiating more than 90% of infestations. Annual costs of production losses, prevention and treatment have been estimated at $149 millions in 1985. Prevention and treatment encompass both insecticidal applications to sheep and non-chemical management practices. In the absence of effective preventive measures, the sheep industry would be non-viable over much of Australia. Insecticide usage against L. cuprina has been marked by the appearance of widespread resistance to cyclodienes in 1956, the organophosphates in 1965, and carbamates in 1966. Resistance has not yet been reported against the triazine compounds introduced for blowfly control in 1981. The most effective non-chemical control measures are surgical (removal of skin from the breech in certain breeds of sheep, and tail-docking). They protect sheep by reducing favourable oviposition sites (dung and urine-stained wool). The spectre of insecticide resistance and the early success of the sterile insect technique (SIT) against screwworm fly in the U.S.A., led this Division to consider SIT and other autocidal methods in the 1960s. The L. cuprina genetics research program was established in 1966 and subsequently expanded in 1971. More recently, lobbying by animal welfare groups against surgical blowfly control practices, as well as increasing consumer awareness of insecticide residues in animal products, have accelerated the search for alternatives to chemical control. When SIT was first considered for L. cuprina control in 1960, little was known about the population dynamics of L. cuprina. There were insufficient ecological data to evaluate the prospects of alternative strategies such as suppression or containment. The number of flies which would have to be released in a SIT program was unknown, as were the costs. Assuming that the cost of

  1. CDC Best Practices for Comprehensive Tobacco Control Programs - 2007

    Data.gov (United States)

    U.S. Department of Health & Human Services — Centers for Disease Control and Prevention (CDC). Best Practices for Comprehensive Tobacco Control Programs. Funding. CDC's Best Practices for Comprehensive Tobacco...

  2. CDC Best Practices for Comprehensive Tobacco Control Programs - 2014

    Data.gov (United States)

    U.S. Department of Health & Human Services — Centers for Disease Control and Prevention (CDC). Best Practices for Comprehensive Tobacco Control Programs. Funding. CDC's Best Practices for Comprehensive Tobacco...

  3. Fabrication procedures for HFIR control plates

    Energy Technology Data Exchange (ETDEWEB)

    Bowden, G.A.; Hicks, G.R.; Knight, R.W.

    1984-10-01

    The HFIR control system uses Alclad cylindrically shaped components, which have regions containing 31 vol % Eu/sub 2/O/sub 3/ and 38 vol % Ta, respectively. Exacting control of the water passage between these components and adjacent reactor parts is mandatory, and precise dimensional control of the finished products is required. This report describes the procedures developed for manufacturing outer control plates and inner control cylinders. Results are cited which demonstrate that circular-shaped outer control plates can be produced with less than 0.025-in. variation from the specified 9.300-in. radius in any region of the plate. Other results show that, by the exercise of careful control, inner control, inner control plates can be welded into cylindrical geometry with diametrical variations held to less than +- 0.010 in. of the intended 17.846-in. average diam. The cylinders can then be explosively sized, while under compression, with diametric variations of less than 0.005 in. while controlling roundness variations to less than 0.030 in. from the specified 17.842-in. finished diam.

  4. Fabrication procedures for HFIR control plates

    International Nuclear Information System (INIS)

    Bowden, G.A.; Hicks, G.R.; Knight, R.W.

    1984-10-01

    The HFIR control system uses Alclad cylindrically shaped components, which have regions containing 31 vol % Eu 2 O 3 and 38 vol % Ta, respectively. Exacting control of the water passage between these components and adjacent reactor parts is mandatory, and precise dimensional control of the finished products is required. This report describes the procedures developed for manufacturing outer control plates and inner control cylinders. Results are cited which demonstrate that circular-shaped outer control plates can be produced with less than 0.025-in. variation from the specified 9.300-in. radius in any region of the plate. Other results show that, by the exercise of careful control, inner control, inner control plates can be welded into cylindrical geometry with diametrical variations held to less than +- 0.010 in. of the intended 17.846-in. average diam. The cylinders can then be explosively sized, while under compression, with diametric variations of less than 0.005 in. while controlling roundness variations to less than 0.030 in. from the specified 17.842-in. finished diam

  5. Afican Health Sciences Vol 9 No 2.pmd

    African Journals Online (AJOL)

    Administrator

    African Health Sciences Vol 9 No 2 June 2009 ... Background:The under five mortality rate (U5MR) is measure of wellbeing and decreasing the U5MR by two .... under three scenarios 1-3. ... Negative indicates increase in childhood mortalities.

  6. PLC/DTAM Software Programs for Pumping Instrumentation and Control Skid L

    Energy Technology Data Exchange (ETDEWEB)

    KOCH, M.R.

    2000-01-03

    This document describes the software programs for the Programmable Logic Controller and the Data Table Access Module for Pumping Instrumentation and Control skid ''L''. The Appendices contains copies of the printouts of these software programs.

  7. 75 FR 55635 - Restructuring of the Stationary Source Audit Program

    Science.gov (United States)

    2010-09-13

    ... assurance requirements that would make an additional audit sample redundant. We believe that Method 18 also has sufficient quality assurance measures that make an audit sample unnecessary. This method requires... Stationary Source Audit Program; Final Rule #0;#0;Federal Register / Vol. 75 , No. 176 / Monday, September 13...

  8. OVERVIEW OF ADVANCED PETROLEUM-BASED FUELS-DIESEL EMISSIONS CONTROL PROGRAM (APBF-DEC)

    Energy Technology Data Exchange (ETDEWEB)

    Sverdrup, George M.

    2000-08-20

    The Advanced Petroleum-Based Fuels-Diesel Emissions Control Program (APBF-DEC) began in February 2000 and is supported by government agencies and industry. The purpose of the APBF-DEC program is to identify and evaluate the optimal combinations of fuels, lubricants, diesel engines, and emission control systems to meet the projected emission standards for the 2000 to 2010 time period. APBF-DEC is an outgrowth of the earlier Diesel Emission Control-Sulfur Effects Program (DECSE), whose objective is to determine the impact of the sulfur levels in fuel on emission control systems that could lower the emissions of NOx and particulate matter (PM) from diesel powered vehicles in the 2002 to 2004 period. Results from the DECSE studies of two emission control technologies-diesel particle filter (DPF) and NOx adsorber-will be used in the APBF-DEC program. These data are expected to provide initial information on emission control technology options and the effects of fuel properties (including additives) on the performance of emission control systems.

  9. Southern African Business Review - Vol 21, No 1 (2017)

    African Journals Online (AJOL)

    Southern African Business Review - Vol 21, No 1 (2017) ... Pre-packaged applications in business reorganisations: International principles · EMAIL ... Microcredit supply under Islamic Banking in Khartoum State, Sudan · EMAIL FREE FULL ...

  10. Malignant melanoma and radiotherapy: past myths, excellent local control in 146 studied lesions at Georgetown University, and improving future management

    International Nuclear Information System (INIS)

    Jahanshahi, Pooya; Nasr, Nadim; Unger, Keith; Batouli, Ali; Gagnon, Gregory J.

    2012-01-01

    Introduction: Once thought to be radioresistant, emerging cellular and clinical evidence now suggests melanoma can respond to large radiation doses per fraction. Materials and Methods: We conducted a retrospective study of all patients treated with stereotactic radiosurgery and stereotactic body radiotherapy at Georgetown University Hospital from May 2002 through November 2008 and studied the classic extrapolated total dose corrected for volume (ETD vol ) model for predicting melanoma tumor response. Region-specific tumor outcomes were categorized by RECIST criteria and local control curves were estimated and analyzed when stratified by ETD vol thresholds by use of the Kaplan–Meier method. Results: Follow-up information was available for 78 lesions (49 intracranial, 8 spinal, and 21 body) with mean follow-up period of 9.2 (range, 2–36) months. 1-year local control rates for intracranial, spinal, and body tumors were 84, 100, and 72%, respectively. Treatments in general were well-tolerated. Increased ETD vol (p < 0.001) among intracranial sites resulted from larger (p < 0.001) doses per fraction combined with smaller (p < 0.001) tumor diameters. Intracranial 6-, 12-, and 24-month local control rates when treated above ETD vol threshold of 230 Gy were all 90 vs. 89, 80, and 53% below this threshold. Body 6- and 12-month local control rates when treated above ETD vol threshold of 100 Gy were 100 and 80% vs. 74 and 59% below this threshold. Discussion: By tailoring to melanoma’s unique radiobiology with large radiation doses per fraction, favorable local control was safely achieved. The ETD vol model combines the important factor of dose per fraction in melanoma treatment with a volume correction factor to predict tumor response. Although limited sample size may have prevented reaching statistical significance for local control improvements using ETD vol thresholds, optimal thresholds may exist to improve future tumor responses and further research is required.

  11. Journal of Applied Sciences and Environmental Management - Vol ...

    African Journals Online (AJOL)

    Journal of Applied Sciences and Environmental Management. ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search · USING ... Journal of Applied Sciences and Environmental Management - Vol 22, No 5 (2018) .... Growth Performance of Five Bean (Phaseolus spp) Varieties as Influenced by Organic ...

  12. AJESMS_ Vol 8 2010 August 15 2011

    African Journals Online (AJOL)

    Prof. Mereku

    2010-08-15

    Aug 15, 2010 ... African Journal of Educational Studies in Mathematics and Sciences Vol. ... girls from two Senior High Schools in Accra, the capital of Ghana in West Africa. .... On the face of it, the Brazilian and Swedish children might seem to have the ... The two profile dimensions that have been specified for teaching, ...

  13. Wind tunnel evaluation of Hi-Vol TSP effectiveness data

    Data.gov (United States)

    U.S. Environmental Protection Agency — Wind tunnel evaluation of EPA's Hi-Vol TSP sampler for sampling effectiveness with regards to aerodynamic particle diameter (5 to 35 microns), wind speed (2, 8, 24...

  14. Implementation contexts of a Tuberculosis Control Program in Brazilian prisons

    Directory of Open Access Journals (Sweden)

    Luisa Gonçalves Dutra de Oliveira

    2015-01-01

    Full Text Available OBJECTIVE To analyze the influence from context characteristics in the control of tuberculosis in prisons, and the influence from the program implementation degrees in observed effects.METHODS A multiple case study, with a qualitative approach, conducted in the prison systems of two Brazilian states in 2011 and 2012. Two prisons were analyzed in each state, and a prison hospital was analyzed in one of them. The data were submitted to a content analysis, which was based on external, political-organizational, implementation, and effect dimensions. Contextual factors and the ones in the program organization were correlated. The independent variable was the program implementation degree and the dependent one, the effects from the Tuberculosis Control Program in prisons.RESULTS The context with the highest sociodemographic vulnerability, the highest incidence rate of tuberculosis, and the smallest amount of available resources were associated with the low implementation degree of the program. The results from tuberculosis treatment in the prison system were better where the program had already been partially implemented than in the case with low implementation degree in both cases.CONCLUSIONS The implementation degree and its contexts – external and political-organizational dimensions – simultaneously contribute to the effects that are observed in the control of tuberculosis in analyzed prisons.

  15. Traffic Control Device Evaluation Program : FY 2017

    Science.gov (United States)

    2018-03-01

    This report presents findings on the activities conducted in the Traffic Control Device Evaluation Program during the 2017 fiscal year. The research on sponsored changeable message signs (continued from the previous year) was terminated by the Federa...

  16. Development of in-plant real-time materials control: the DYMAC program

    International Nuclear Information System (INIS)

    Augustson, R.H.

    1976-01-01

    LASL is in the process of developing a dynamic materials control program, called DYMAC, to provide the technology for stringent real-time nuclear materials control. The DYMAC program combines hardware and software into four component subsystems: nondestructive assay (NDA), instrumentation, data acquisition, data base management, and real-time accountability. To demonstrate the feasibility of DYMAC, a working real-time materials control system will be installed at the new plutonium facility presently under construction at LASL. Program emphasis is on developing practical solutions to generic problems and communicating those solutions to other installations for use throughout the nuclear fuel cycle

  17. Journal of Applied Sciences and Environmental Management - Vol ...

    African Journals Online (AJOL)

    Journal of Applied Sciences and Environmental Management. ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search · USING ... Journal of Applied Sciences and Environmental Management - Vol 22, No 4 (2018) ... Evaluating the effect of mobility speed on the performance of three handover algorithms in ...

  18. Shostakovich: The Orchestral Songs Vol. 2 / Michael Tanner

    Index Scriptorium Estoniae

    Tanner, Michael

    1996-01-01

    Uuest heliplaadist "Shostakovich: The Orchestral Songs Vol. 2: Six Romances on texts by Japanese poets, Op. 21. Six Poems on Marina Tsvetayeva, Op. 143. Suite on Verses of Michelangelo, Op. 145. Gothenburg Symphony Orchestra, Neeme Järvi". DG 447 085-2GH (71 minutes:DDD)

  19. On a program manifold’s stability of one contour automatic control systems

    Directory of Open Access Journals (Sweden)

    Zumatov S. S.

    2017-12-01

    Full Text Available Methodology of analysis of stability is expounded to the one contour systems automatic control feedback in the presence of non-linearities. The methodology is based on the use of the simplest mathematical models of the nonlinear controllable systems. Stability of program manifolds of one contour automatic control systems is investigated. The sufficient conditions of program manifold’s absolute stability of one contour automatic control systems are obtained. The Hurwitz’s angle of absolute stability was determined. The sufficient conditions of program manifold’s absolute stability of control systems by the course of plane in the mode of autopilot are obtained by means Lyapunov’s second method.

  20. Robust Control Design via Linear Programming

    Science.gov (United States)

    Keel, L. H.; Bhattacharyya, S. P.

    1998-01-01

    This paper deals with the problem of synthesizing or designing a feedback controller of fixed dynamic order. The closed loop specifications considered here are given in terms of a target performance vector representing a desired set of closed loop transfer functions connecting various signals. In general these point targets are unattainable with a fixed order controller. By enlarging the target from a fixed point set to an interval set the solvability conditions with a fixed order controller are relaxed and a solution is more easily enabled. Results from the parametric robust control literature can be used to design the interval target family so that the performance deterioration is acceptable, even when plant uncertainty is present. It is shown that it is possible to devise a computationally simple linear programming approach that attempts to meet the desired closed loop specifications.

  1. African Journal of Biotechnology - Vol 14, No 18 (2015)

    African Journals Online (AJOL)

    African Journal of Biotechnology - Vol 14, No 18 (2015). Journal Home ... Isolation of microalgae species from arid environments and evaluation of their potentials for biodiesel production · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  2. Jolivet: Complete Flute Music, Vol. 2 / Guy S. Rickards

    Index Scriptorium Estoniae

    Rickards, Guy S.

    1996-01-01

    Uuest heliplaadist "Jolivet: Complete Flute Music, Vol. 2. Kroumata Percussion Ensemble, Tapiola Sinfonietta, Paavo Järvi". BIS CD 739 (64 minutes: DDD). Item marked from CD630 (6/94), CD272, remainder new to UK

  3. Development of CNC Program for Piston Production

    African Journals Online (AJOL)

    2013-03-01

    Mar 1, 2013 ... West African Journal of Industrial & Academic Research Vol.6 No.1 March 2013. West African Journal of ... Surprisingly, this is not the case. Nigeria and many ... systems of machine tools, machines, electric control components ...

  4. 7 CFR 58.149 - Alternate quality control programs for dairy products.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Alternate quality control programs for dairy products... for dairy products. (a) When a plant has in operation an acceptable quality control program which is... (CONTINUED) REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946 AND THE EGG PRODUCTS...

  5. Programs for control of an analog-signal switching network

    International Nuclear Information System (INIS)

    D'Ottavio, T.; Enriquez, R.; Katz, R.; Skelly, J.

    1989-01-01

    A suite of programs has been developed to control the network of analog-signal switching multiplexers in the AGS complex. The software is driven by a relational database which describes the architecture of the multiplexer tree and the set of available analog signals. Signals are routed through a three-layer multiplexer tree, to be made available at four consoles each with three 4-trace oscilloscopes. A menu-structured operator interface program is available at each console, to accept requests to route any available analog signal to any of that console's 12 oscilloscope traces. A common routing-server program provides automatic routing-server program provides automatic routing of requested signals through the layers of multiplexers, maintaining a reservation database to denote free and in-use trunks. Expansion of the analog signal system is easily accommodated in software by adding new signals, trunks, multiplexers, or consoles to the database. Programmatic control of the triggering signals for each of the oscilloscopes is also provided. 3 refs., 4 figs., 3 tabs

  6. African Journal of Clinical and Experimental Microbiology - Vol 5, No ...

    African Journals Online (AJOL)

    African Journal of Clinical and Experimental Microbiology - Vol 5, No 1 (2004) ... ASYMPTOMATIC SIGNIFICANT BACTERIURIA AMONG PREGNANT WOMEN IN ... TO PARASITISM AND THE IMPLICATION ON TREATMENT APPROACH ...

  7. Southern African Journal of Environmental Education - Vol 8 (1988)

    African Journals Online (AJOL)

    Southern African Journal of Environmental Education - Vol 8 (1988) ... An interaction of archaeology with school history in a museum education context ... The child in the outdoor classroom · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  8. Research in Hospitality Management - Vol 5, No 2 (2015)

    African Journals Online (AJOL)

    Research in Hospitality Management - Vol 5, No 2 (2015) ... Hotel quality in the European Capital of Culture: Leeuwarden 2018 · EMAIL FREE FULL ... Consumer patronage and willingness-to-pay at different levels of restaurant attributes: A ...

  9. Coordination Between the HEU Transparency Program and the Material Protection, Control and Accountability Program

    International Nuclear Information System (INIS)

    Glaser, J.; Hernandez, J.; Dougherty, D.; Bieniawski, A.; Cahalane, P.; Mastal, E.

    2000-01-01

    DOE sponsored programs such as Material Protection Control and Accountability (MPC and A) and implementation of the Highly-Enriched Uranium (HEU) Transparency Program send US personnel into Russian nuclear facilities and receive Russian representatives from these programs. While there is overlap in the Russian nuclear facilities visited by these two programs, there had not been any formal mechanism to share information between them. Recently, an MPC and A/HEU Working Group was developed to facilitate the sharing of appropriate information and to address concerns expressed by Minatom and Russian facility personnel such as US visit scheduling conflicts. This paper discusses the goals of the Working Group and ways it has helped to allow the programs to work more efficiently with the Russian facilities

  10. Quality-control activities of the Hanford Environmental Surveillance Program

    International Nuclear Information System (INIS)

    Price, K.R.; Jaquish, R.E.

    1982-01-01

    A comprehensive approach to quality control (QC) has been developed by the Pacific Northwest Laboratory for the Hanford Environmental Surveillance Program. The framework of quality control for the surveillance program has been documented in a QC implementation guide wherein QC requirements are specified and specific responsibilities and authorities are described. Subjects in the guide include the collection, analysis, and reporting of samples as well as equipment calibration and maintenance, training, audits, and record keeping. A QC file and library have been established to store pertinent documentation, records, and references for ready access

  11. 75 FR 11327 - Proposed Establishment of Certification Programs for Health Information Technology

    Science.gov (United States)

    2010-03-10

    ... Certification Programs for Health Information Technology; Proposed Rule #0;#0;Federal Register / Vol. 75, No. 46... for Health Information Technology AGENCY: Office of the National Coordinator for Health Information... granted to the National Coordinator for Health Information Technology (the National Coordinator) by...

  12. PLC/DTAM Software Programs for Pumping Instrumentation and Control Skid X

    International Nuclear Information System (INIS)

    HORNER, T.M.

    2001-01-01

    This document describes the software programs for the Allen-Bradley SLC 500 programmable logic controller (PLC) and the Allen-Bradley DTAM PLUS operator interface module used on Pumping Instrumentation and Control (PIC) skid ''X''. The software programs for the SLC 500 and DTAM Plus are based on the core programs provided by Allen-Bradley. The PLC and DTAM software programs on skid ''D'' for SX-104 are the baseline programs. These baselines will be tailored for each individual BY-farm skid. An Acceptance Test Procedure (ATP) and an Operational Test Procedure (OTP) verify that the software programs meet the specific requirements for BY-105 pumping. This document represents the final PLC and DTAM programs for PIC skid ''X'' at BY-105. These programs were printed out after the performance of the OTP. The OTP acts as the final qualification test for the software programs. Functional requirements and details of the PLC ladder logic are described in this document. The final programs entered into the PLC and DTAM Plus are included as Appendices to this document

  13. PLC and DTAM Software Programs for Pumping Instrumentation and Control Skid P

    International Nuclear Information System (INIS)

    KOCH, M.R.

    2000-01-01

    This document describe the software programs for the Programmable Logic Controller and the Datable Access Module for Pumping Instrumentation and Control skid ''P''. The Appendices contains copies of the printouts of these software programs

  14. [Analysis of the results of the SEIMC External Quality Control Program, 2007].

    Science.gov (United States)

    Guna Serrano, María del Remedio; Orta Mira, Nieves; Ovies, María; Gimeno Cardona, Concepción; Pérez, José L

    2008-11-01

    The External Quality Control Program of the Spanish Society of Infectious Diseases and Clinical Microbiology (SEIMC) includes controls for bacteriology, serology, mycology, parasitology, mycobacteria, virology and molecular microbiology. This article presents the most important conclusions and lessons drawn from the 2007 controls. As a whole, the results obtained in 2007 confirm the excellent skill and good technical standards found in previous years. However, erroneous results can be obtained in any laboratory and in clinically relevant determinations. A few deviations were observed in some controls, calling for critical reflection. Once again, the results of this program highlighted the need to complement internal with external controls, such as those offered by the SEIMC program.

  15. Water quality control program in experimental circuits

    International Nuclear Information System (INIS)

    Cegalla, Miriam A.

    1996-01-01

    The Water Quality Control Program of the Experimental Circuits visualizes studying the water chemistry of the cooling in the primary and secondary circuits, monitoring the corrosion of the systems and studying the mechanism of the corrosion products transport in the systems. (author)

  16. 78 FR 75961 - Energy Conservation Program: Test Procedures for Electric Motors

    Science.gov (United States)

    2013-12-13

    ... Conservation Program: Test Procedures for Electric Motors; Final Rule #0;#0;Federal Register / Vol. 78 , No... Procedures for Electric Motors AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy... procedures for electric motors to allow currently unregulated motors to be tested by clarifying the test...

  17. South African Journal of Higher Education - Vol 19 (2005)

    African Journals Online (AJOL)

    South African Journal of Higher Education - Vol 19 (2005) ... The 'idea of engagement' and 'the African University in the 21st Century': Some ... The challenges of knowledge production by researchers in Public Administration, a South African ...

  18. Neurolinguistic programming training, trait anxiety, and locus of control.

    Science.gov (United States)

    Konefal, J; Duncan, R C; Reese, M A

    1992-06-01

    Training in the neurolinguistic programming techniques of shifting perceptual position, visual-kinesthetic dissociation, timelines, and change-history, all based on experiential cognitive processing of remembered events, leads to an increased awareness of behavioral contingencies and a more sensitive recognition of environmental cues which could serve to lower trait anxiety and increase the sense of internal control. This study reports on within-person and between-group changes in trait anxiety and locus of control as measured on the Spielberger State-Trait Anxiety Inventory and Wallston, Wallston, and DeVallis' Multiple Health Locus of Control immediately following a 21-day residential training in neurolinguistic programming. Significant with-in-person decreases in trait-anxiety scores and increases in internal locus of control scores were observed as predicted. Chance and powerful other locus of control scores were unchanged. Significant differences were noted on trait anxiety and locus of control scores between European and U.S. participants, although change scores were similar for the two groups. These findings are consistent with the hypothesis that this training may lower trait-anxiety scores and increase internal locus of control scores. A matched control group was not available, and follow-up was unfortunately not possible.

  19. PLC and DTAM Software Programs for Pumping Instrumentation and Control Skid ''M''

    International Nuclear Information System (INIS)

    KOCH, M.R.

    2000-01-01

    This document describes the software programs for the Programmable Logic Controller and the Data Table Access Module for Pumping Instrumentation and Control skid ''M''. The Appendices contains copies of the printouts of these software programs

  20. Final Environmental Impact Statement for the Kauai Acoustic Thermometry of Ocean Climate Project and Its Associated Marine Mammal Research Program: Vol 1

    Science.gov (United States)

    1995-05-01

    possibly subadults, were traveling in pairs, and almost half of the recorded sounds were stereotyped doublets, unlike the sounds recorded by Cummings and...purpose and unique stereotyped click sequence "codas" have been recorded from individual whales over periods lasting several hours (Watldns and Schevill...Beaked whales of the genus Mesoplodon. pp 349-430. In: S.H. Ridgway and R. Harrison (eds.), Handbook of marine mammals, Vol. 4. Academic Press Ltd. Meller

  1. Establishment of seed quality control programs Implantação de programas de controle de qualidade de sementes

    Directory of Open Access Journals (Sweden)

    S. M. Cicero

    1998-01-01

    Full Text Available An efficient quality control program should lead to the production of high quality seeds. Consequently, a series of technical and administrative procedures must be adopted in a way that does not compromise this objective. Considering that, in applied terms, external control becomes less important as internal control programs advance technologically, this work emphasizes the principle factors that should be considered in the implantation of a seed quality control program, such as: work groups, physical structure and procedures to initiate the program.Um programa de controle de qualidade deve proporcionar a produção de sementes de alta qualidade. Para que tal objetivo seja alcançado com sucesso, e necessário a adoção de uma serie de procedimentos técnicos e administrativos, sem os quais haverá comprometimento das metas a serem atingidas. Levando-se em conta que, em termos aplicados, o controle externo perde importância na medida que avançam tecnologicamente os programas de controle interno, o presente trabalho aborda os principais fatores que devem ser considerados na implantação de um programa de controle de qualidade de sementes, tais como: equipe de trabalho, estrutura física e procedimentos para iniciar o programa.

  2. The first decade of the Massachusetts Tobacco Control Program.

    OpenAIRE

    Koh, Howard K.; Judge, Christine M.; Robbins, Harriet; Celebucki, Carolyn Cobb; Walker, Deborah K.; Connolly, Gregory N.

    2005-01-01

    This article provides a comprehensive overview of the first decade of the Massachusetts Tobacco Control Program (MTCP). Born after Massachusetts passed a 1992 ballot initiative raising cigarette excise taxes to fund the program, MTCP greatly reduced statewide cigarette consumption before being reduced to a skeletal state by funding cuts. The article describes the program's components and goals, details outcomes, presents a summary of policy accomplishments, and reviews the present status of M...

  3. Modifications to the control program HASP

    International Nuclear Information System (INIS)

    Bartoli, M.; Dall'Olio, L.; Mareso, T.; Ricci, F.

    1973-01-01

    Modification to HASP version 3, level 0, a control program for an electronic computer, was described with the purpose of solving some operative and managing problems not solved by the standard version for the IBM 360/75 computer. The application and utilization of these facilities require a deep knowledge of the HASP II design, version 3, level 0, 360D-05.1.014

  4. Programming a real-time operating system for satellite control applications Satellite Control Applications

    International Nuclear Information System (INIS)

    Omer, M.; Anjum, O.; Suddle, M.R.

    2004-01-01

    With the realization of ideas like formation flights and multi-body space vehicles the demands on an attitude control system have become increasingly complex. Even in its most simplified form, the control system for a typical geostationary satellite has to run various supervisory functions along with determination and control algorithms side by side. Within each algorithm it has to employ multiple actuation and sensing mechanisms and service real time interrupts, for example, in the case of actuator saturation and sensor data fusion. This entails the idea of thread scheduling and program synchronization, tasks specifically meant for a real time OS. This paper explores the embedding of attitude determination and control loop within the framework of a real time operating system provided for TI's DSP C6xxx series. The paper details out the much functionality provided within the scaleable real time kernel and the analysis and configuration tools available, It goes on to describe a layered implementation stack associated with a typical control for Geo Stationary satellites. An application for control is then presented in which state of the art analysis tools are employed to view program threads, synchronization semaphores, hardware interrupts and data exchange pipes operating in real time. (author)

  5. Validation of FORTRAN emulators for the G2 varian control programs

    International Nuclear Information System (INIS)

    Delorme, G.

    1996-01-01

    The extensive use of the Gentilly full scope simulator for training and verification of plant procedures, forced the development of a reliable desktop simulator for software maintenance purposes. For that we needed emulators for the control programs which run on the DCC Varian computers in the full scope simulator. This paper presents the validation results for the Reactor Regulating System (RRS) program. This emulator was programmed in a modular fashion providing ease of maintenance and of transportation to another environment. The results obtained with specific tests or with integrated testing involving complex control rule interactions, compared favorably with the ones obtained using the actual plant control programs running on the full scope simulator, which constitutes an irrefutable validation procedure. This RRS package along with the other emulators being validated In this manner could be used in safety codes with confidence. (author)

  6. Validation of a proposal for evaluating hospital infection control programs.

    Science.gov (United States)

    Silva, Cristiane Pavanello Rodrigues; Lacerda, Rúbia Aparecida

    2011-02-01

    To validate the construct and discriminant properties of a hospital infection prevention and control program. The program consisted of four indicators: technical-operational structure; operational prevention and control guidelines; epidemiological surveillance system; and prevention and control activities. These indicators, with previously validated content, were applied to 50 healthcare institutions in the city of São Paulo, Southeastern Brazil, in 2009. Descriptive statistics were used to characterize the hospitals and indicator scores, and Cronbach's α coefficient was used to evaluate the internal consistency. The discriminant validity was analyzed by comparing indicator scores between groups of hospitals: with versus without quality certification. The construct validity analysis was based on exploratory factor analysis with a tetrachoric correlation matrix. The indicators for the technical-operational structure and epidemiological surveillance presented almost 100% conformity in the whole sample. The indicators for the operational prevention and control guidelines and the prevention and control activities presented internal consistency ranging from 0.67 to 0.80. The discriminant validity of these indicators indicated higher and statistically significant mean conformity scores among the group of institutions with healthcare certification or accreditation processes. In the construct validation, two dimensions were identified for the operational prevention and control guidelines: recommendations for preventing hospital infection and recommendations for standardizing prophylaxis procedures, with good correlation between the analysis units that formed the guidelines. The same was found for the prevention and control activities: interfaces with treatment units and support units were identified. Validation of the measurement properties of the hospital infection prevention and control program indicators made it possible to develop a tool for evaluating these programs

  7. Mizan Law Review - Vol 5, No 2 (2011)

    African Journals Online (AJOL)

    Mizan Law Review - Vol 5, No 2 (2011) ... Ethiopian Law of International Carriage by Air: An Overview · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT ... Comment: Overview of the Core Changes in the New Ethiopian Urban Land Leasehold Proclamation · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  8. (JASR) Vol. 12, No. 2, 2012 DEPLETING FOREST RESOURCES

    African Journals Online (AJOL)

    HP

    deteriorating forest resources of Nigeria and its impact on climate change. Key words: Forest Resources, ... Mangrove Forest. Sub Total. 905,930 .... South America” Global Biogeographical Cycle vol 9, pp 329-350. Miller, K. R., Reid, W. V., ...

  9. Pan African Medical Journal - Vol 16, No 1 (2014)

    African Journals Online (AJOL)

    Pan African Medical Journal - Vol 16, No 1 (2014) .... Cancer incidence in Morocco: report from Casablanca registry 2005-2007 · EMAIL FREE FULL .... Maladie de Leo-Buerger faisant suite à une intoxication au cannabis · EMAIL FREE FULL ...

  10. African Heath Sciences Vol 8 No 1.p65

    African Journals Online (AJOL)

    Harriet

    African Health Sciences Vol 8 No 1 March 2008. 36 ... Objective:To highlight difficulties in the diagnosis and management of non-traumatic perforation of small bowel. Material and ..... of three operations for typhoid perforation. Br J Surg. 1997;.

  11. SEMTAP (Serpentine End Match TApe program): The Easy Way to Program Your Numerically Controlled Router for the Production of SEM Joints

    Science.gov (United States)

    Ronald E. Coleman

    1977-01-01

    SEMTAP (Serpentine End Match TApe Program) is an easy and inexpensive method of programing a numerically controlled router for the manufacture of SEM (Serpentine End Matching) joints. The SEMTAP computer program allows the user to issue commands that will accurately direct a numerically controlled router along any SEM path. The user need not be a computer programer to...

  12. A mathematical method for boiling water reactor control rod programming

    International Nuclear Information System (INIS)

    Tokumasu, S.; Hiranuma, H.; Ozawa, M.; Yokomi, M.

    1985-01-01

    A new mathematical programming method has been developed and utilized in OPROD, an existing computer code for automatic generation of control rod programs as an alternative inner-loop routine for the method of approximate programming. The new routine is constructed of a dual feasible direction algorithm, and consists essentially of two stages of iterative optimization procedures Optimization Procedures I and II. Both follow almost the same algorithm; Optimization Procedure I searches for feasible solutions and Optimization Procedure II optimizes the objective function. Optimization theory and computer simulations have demonstrated that the new routine could find optimum solutions, even if deteriorated initial control rod patterns were given

  13. A program development tool for KEK VME-MAP control system

    International Nuclear Information System (INIS)

    Nakagawa, H.; Katoh, T.; Kadokura, E.; Akiyama, A.; Nigorikawa, K.; Ishii, K.

    1992-01-01

    The control system for KEK 12 GeV Proton Synchrotron has been replaced with a distributed VME-bus based microcomputer system and a MAP local area network. In order to simplify programming for network application tasks, a set of a preprocessor for a PASCAL compiler and a network communication server has been developed. Application programs for accelerator control system have blocks with similar codes; sending, waiting for, receiving, analyzing messages, etc. The preprocessor called 'OBJP' incorporates such common codes into the source code written by an application programmer. In case of a simple program, the size of the source code is reduced by one tenth of a full coding. (author)

  14. Duke Power Company's control rod wear program

    International Nuclear Information System (INIS)

    Culp, D.C.; Kitlan, M.S. Jr.

    1990-01-01

    Recent examinations performed at several foreign and domestic pressurized water reactors have identified significant control rod cladding wear, leading to the conclusion that previously believed control rod lifetimes are not attainable. To monitor control rod performance and reduce safety concerns associated with wear, Duke Power Company has developed a comprehensive control rod wear program for Ag-In-Cd and boron carbide (B 4 C) rods at the McGuire and Catawba nuclear stations. Duke Power currently uses the Westinghouse 17 x 17 Ag-In-Cd control rod design at McGuire Unit 1 and the Westinghouse 17 x 17 hybrid B 4 C control rod design with a Ag-In-Cd tip at McGuire Unit 2 and Catawba Units 1 and 2. The designs are similar, with the exception of the absorber material and clad thickness. There are 53 control rods per unit

  15. Precedent approach to the formation of programs for cyclic objects control

    Science.gov (United States)

    Kulakov, S. M.; Trofimov, V. B.; Dobrynin, A. S.; Taraborina, E. N.

    2018-05-01

    The idea and procedure for formalizing the precedent method of formation of complex control solutions (complex control programs) is discussed with respect to technological or organizational objects, the operation of which is organized cyclically. A typical functional structure of the system of precedent control by complex technological unit is developed, including a subsystem of retrospective optimization of actually implemented control programs. As an example, the problem of constructing replaceable planograms for the operation of the link of a heading-and-winning machine on the basis of precedents is considered.

  16. Schostakowitsch. Orchesterlieder (Vol. 2), Neeme Järvi / Werner Pfister

    Index Scriptorium Estoniae

    Pfister, Werner

    1996-01-01

    Uuest heliplaadist "Schostakowitsch. Orchesterlieder (Vol. 2): Sechs Romanzen op. 21, Sechs Gedichte op. 143a, Suite auf Verse von Michelangelo Buonarroti op. 145a. Göteborger Sinfoniker, Neeme Järvi". DG CD 447 085-2 (WD: 71'06") DDD

  17. 78 FR 51597 - Modernizing the E-Rate Program for Schools and Libraries

    Science.gov (United States)

    2013-08-20

    ... this goal would be benchmarking the performance of schools' and libraries' broadband connections... Modernizing the E-Rate Program for Schools and Libraries; Proposed Rule #0;#0;Federal Register / Vol. 78 , No... Libraries AGENCY: Federal Communications Commission. ACTION: Proposed rule. SUMMARY: In this document, the...

  18. Measuring attachment to life in old age: the Portuguese version of the Positive Valuation of Life Scale (Positive VOL).

    Science.gov (United States)

    Araújo, Lia; Ribeiro, Oscar; Teixeira, Laetitia; Azevedo, Maria João; Jopp, Daniela S; Rott, Christoph; Paúl, Constança

    2015-10-01

    This study aims to present the psychometric properties of the Portuguese version of the Positive Valuation of Life Scale (Lawton et al. in J Aging Ment Healt 13:3-31, 2001). Sample included 207 community-dwelling elders (129 women; M Age = 77.2 years, SD = 7.5). The data collection included the translated and adapted Portuguese version of Positive Valuation of Life Scale, Life Satisfaction Index Z, Meaning in Life Questionnaire and Geriatric Depression Scale. From exploratory factor analysis, two factors emerged, existential beliefs and perceived control, explaining 49 % of the total variance. Both factors were positively related with meaning in life and life satisfaction and negatively related with depression (p 0.75). The Portuguese version of Positive VOL Scale represents a reliable and valid measure to capture the subjective experience of attachment to one's life. The two-factor structure is an update to Lawton's previous work and in line with findings obtained in the USA (Dennis et al. in What is valuation of life for frail community-dwelling older adults: factor structure and criterion validity of the VOL, Thomas Jefferson University, Center for Applied Research on Aging and Health Research, 2005) and Japan (Nakagawa et al. in Shinrigaku Kenkyu 84:37-46, 2013). Future research is required to investigate VOL predictors and the potential changes toward the end of the life span.

  19. PLC and DTAM Software Programs for Pumping Instrumentation and Control Skid M

    Energy Technology Data Exchange (ETDEWEB)

    KOCH, M.R.

    2000-02-14

    This document describes the software programs for the Programmable Logic Controller and the Data Table Access Module for Pumping Instrumentation and Control skid ''M''. The Appendices contains copies of the printouts of these software programs.

  20. Browse Title Index

    African Journals Online (AJOL)

    Items 351 - 400 of 490 ... Vol 5, No 3 (2009), Propositional Optimal Trajectory Programming for Improving Stability of Hermite Definite Control System, Abstract. SO Abdulkareem, AS ... Vol 7, No 1 (2011), Regression approach to estimate OF of the E(S2) values for supersaturated designs, Abstract. CO Todo, JI Mbegbu.

  1. Nigerian Journal of Chemical Research 29 Vol. 15, 2010 ...

    African Journals Online (AJOL)

    Hp

    Nigerian Journal of Chemical Research. 29. Vol. 15, 2010. Antibacterial & Antifungal Studies On Some Coordination Compound Of Metals. With Ampicillin. Pranay Guru. Department of Engineering Chemistry, People's College of Research & Technology, Bhopal. (M. P.) India, email:pranayguru@rediffmail.com. ABSTRACT.

  2. African Journal of Biotechnology - Vol 12, No 21 (2013)

    African Journals Online (AJOL)

    African Journal of Biotechnology - Vol 12, No 21 (2013) ... Studies of the genetics of inheritance of stem rust resistance in bread wheat · EMAIL FREE .... Evaluation of the effect of ginger modified cassava starch as thickener in the formulation of ...

  3. Programming the control of magnetic field measurements

    International Nuclear Information System (INIS)

    David, L.

    1998-01-01

    This paper gives a short review concerning the new NMR probe measurement control system. Then it presents the new program 'CYCLOCHAMP' attached to the magnetic field measurement which also allows to cycle the magnetic field inside the cyclotrons and to equilibrate it among the SSC sectors. (authors)

  4. Cross sections for atomic processes, vol. 2

    International Nuclear Information System (INIS)

    Takayanagi, Kazuo; Suzuki, Hiroshi; Otani, Shunsuke

    1977-09-01

    This data collection book contains the data on all processes involving hydrogen and helium isotopes, their ions, electrons and photons, collected systematically and comprehensively, and is compiled subsequently to Vol. 1 as one of the works of the data collection study group in the Institute of Plasma Physics, Nagoya University, Japan. The items of the contents will include energy level, multiplicately excited state, radiation process, electron collision, ionic collision, recombination, collision of neutral atoms, colliding process involving molecules, and other processes. However, the first edition this time contains energy level, radiation process, electron collision and ionic collision, and the data on remaining items are now under collection. Though some criticisms have been heard about Vol. 1, the authors consider that such comprehensive collection based on systematic classification is the foundation of making a generalized data bank expected to become necessary in future. Thus the data collection book includes all relevant processes, and records the experimental data and theoretically calculated results in principle without modification by selecting them systematically. This year, investigation on data evaluation is taken up also as one of the tasks of the study group. (Wakatsuki, Y.)

  5. Creating a meaningful infection control program: one home healthcare agency's lessons.

    Science.gov (United States)

    Poff, Renee McCoy; Browning, Sarah Via

    2014-03-01

    Creating a meaningful infection control program in the home care setting proved to be challenging for agency leaders of one hospital-based home healthcare agency. Challenges arose when agency leaders provided infection control (IC) data to the hospital's IC Committee. The IC Section Chief asked for national benchmark comparisons to align home healthcare reporting to that of the hospital level. At that point, it was evident that the home healthcare IC program lacked definition and structure. The purpose of this article is to share how one agency built a meaningful IC program.

  6. Purwarupa Sistem Kontrol Elevator Berbasis Programable Logic Control

    Directory of Open Access Journals (Sweden)

    Fathahillah Fathahillah

    2017-12-01

    Full Text Available Various methods / types of controls developed in accordance with industry needs one of them in the field of building automation system. One of the controls in the field of building automation system is the elevator control system (elevator. Early elevator control systems that transport humans or goods as vertical transportation vehicles are still conventional using human power, then evolved using steam engines, until now the elevators use AC motors equipped with control systems. The purpose of this research is to design the prototype of elevator control system using programmable logic control (PLC. The type of PLC controller used in the study using Omron PLC. The results show the design of prototype of elevator control system using PLC successfully and can control eleveator in accordance with its function, besides its programming form can be more simple.

  7. PWM CONTROLLER'S MODELS FOR INVESTIGATION ACS IN SPICEFAMILY ECAD PROGRAMS

    Directory of Open Access Journals (Sweden)

    O. V. VASYLENKO

    2018-05-01

    Full Text Available Purpose. To improve simulation and design of Automatic Control Systems in the SPICE-compatible programs and to obtain separate economic and universal macromodels of PWM controller. Development of an PWM controller economical macromodel for the study of automatic control systems (ACS in computer-aided design (ECAD  programs, which does not generate algorithmic failures in comparison with the existing models of PWM. Findings. Analysis of SPICE-family applications’ mathematical basis allowed to classifying existing models of PWM-controllers, defining their suitability for ACS simulation. The criteria for the synthesis of new models have been defined. For the SPICE 3G algorithms, the Switch and Averaged models based on behavioral elements has been developed. Universal and economical PWM controller macromodel based on the simple algorithm for determining the output signal with minimum numbers of input parameters has been designed. For the Automated Measuring magnetic susceptibility System, the macromodel of quasi-PWM signal generator have been designed, which is used in the compensation subsystem. This model is different from the existing ones: it synthesizes the staircase output signal instead the pulse one, thus, there is direct control of the amplitude of the output signal, which is taken averaged. The adequacy of the models is confirmed as comparison of the simulation results during investigations of the model already existing in the SPICE program, as well as the results of experiments with real ACS. The modeling of the PWM controller was carried out on the basis of behavioral elements from the ECAD library, simulation (solution of algebra-differential equations systems with programming elements is based on SPICE algorithms. The object of the study was the simulation process of ACS with the pulse-width principle of adjusting the output value. The subject of the research are the models of PWM controllers. Originality. The new macromodel of PWM

  8. Computer program for post-flight evaluation of the control surface response for an attitude controlled missile

    Science.gov (United States)

    Knauber, R. N.

    1982-01-01

    A FORTRAN IV coded computer program is presented for post-flight analysis of a missile's control surface response. It includes preprocessing of digitized telemetry data for time lags, biases, non-linear calibration changes and filtering. Measurements include autopilot attitude rate and displacement gyro output and four control surface deflections. Simple first order lags are assumed for the pitch, yaw and roll axes of control. Each actuator is also assumed to be represented by a first order lag. Mixing of pitch, yaw and roll commands to four control surfaces is assumed. A pseudo-inverse technique is used to obtain the pitch, yaw and roll components from the four measured deflections. This program has been used for over 10 years on the NASA/SCOUT launch vehicle for post-flight analysis and was helpful in detecting incipient actuator stall due to excessive hinge moments. The program is currently set up for a CDC CYBER 175 computer system. It requires 34K words of memory and contains 675 cards. A sample problem presented herein including the optional plotting requires eleven (11) seconds of central processor time.

  9. North Fork Feather River Erosion Control Program

    International Nuclear Information System (INIS)

    Harrison, L.

    1991-01-01

    PG and E, an investor owned gas and electric utility serving northern and central California, has been engaged since 1984 in the development and implementation of a regional erosion control program for the 954 square mile northern Sierra Nevada watersheed of the East Branch of the North Fork Feather River in Plumas County, California. PG and E entered into an agreement with 13 governmental agencies and a number of private landowners using Coordinated Resource Management and Planning: to cooperatively develop, fund and implement the program. The group has completed several field projects and has a number of additional projects in various stages of development. This paper reports that the program provides multiple environmental and economic benefits including reduction of soil erosion and sedimentation, improved fisheries, enhancement of riparian habitat, increased land values, improved recreation opportunities, and preservation of watershed resources

  10. Monsanto Mound Laboratory tritium waste control technology development program

    International Nuclear Information System (INIS)

    Bixel, J.C.; Kershner, C.J.; Rhinehammer, T.B.

    1975-01-01

    Over the past four years, implementation of tritium waste control programs has resulted in a 30-fold reduction in the gaseous tritium effluents from Mound Laboratory. However, to reduce tritium waste levels to the ''as low as practicable'' guideline poses problems that are beyond ready solution with state-of-the-art tritium control technology. To meet this advanced technology need, a tritium waste control technology program was initiated. Although the initial thrust of the work under this program was oriented toward development of gaseous effluent treatment systems, its natural evolution has been toward the liquid waste problem. It is thought that, of all the possible approaches to disposal of tritiated liquid wastes, recovery offers the greatest advantages. End products of the recovery processes would be water detritiated to a level below the Radioactivity Concentration Guide (RCG) or detritiated to a level that would permit safe recycle in a closed loop operation and enriched tritium. The detritiated water effluent could be either recycled in a closed loop operation such as in a fuel reprocessing plant or safely released to the biosphere, and the recovered tritium could be recycled for use in fusion reactor studies or other applications

  11. A Clustered Randomized Controlled Trial of the Positive Prevention PLUS Adolescent Pregnancy Prevention Program.

    Science.gov (United States)

    LaChausse, Robert G

    2016-09-01

    To determine the impact of Positive Prevention PLUS, a school-based adolescent pregnancy prevention program on delaying sexual intercourse, birth control use, and pregnancy. I randomly assigned a diverse sample of ninth grade students in 21 suburban public high schools in California into treatment (n = 2483) and control (n = 1784) groups that participated in a clustered randomized controlled trial. Between October 2013 and May 2014, participants completed baseline and 6-month follow-up surveys regarding sexual behavior and pregnancy. Participants in the treatment group were offered Positive Prevention PLUS, an 11-lesson adolescent pregnancy prevention program. The program had statistically significant impacts on delaying sexual intercourse and increasing the use of birth control. However, I detected no program effect on pregnancy rates at 6-month follow-up. The Positive Prevention PLUS program demonstrated positive impacts on adolescent sexual behavior. This suggests that programs that focus on having students practice risk reduction skills may delay sexual activity and increase birth control use.

  12. Ghana Medical Journal - Vol 47, No 2 (2013)

    African Journals Online (AJOL)

    Ghana Medical Journal - Vol 47, No 2 (2013). Journal Home > Archives ... DOWNLOAD FULL TEXT. AB Olokoba, W Gashau, S Bwala, A Adamu, FK Salawu, 79-81 ... DOWNLOAD FULL TEXT. EY Bonney, NA Addo, NAA Ntim, F Addo-Yobo, P Bondzie, KE Aryee, J Barnor, J brandful, V Bekoe, SA Ohene, W Ampofo, 82-86 ...

  13. Afican Health Sciences Vol 10 No 1.pmd

    African Journals Online (AJOL)

    Administrator

    African Health Sciences Vol 10 No 1 March 2010. 89. Rethinking ... There is a worsening scarcity of Human Resource for ... This is not in any way lowering standards of oncologic diagnosis but filling the otherwise ... for health ratios stand at 0.8 health workers per 1000 ... cancer occurs 10-15years earlier in black women.

  14. Development of a standard for computer program verification and control

    International Nuclear Information System (INIS)

    Dunn, T.E.; Ozer, O.

    1980-01-01

    It is expected that adherence to the guidelines of the ANS 10.4 will: 1. Provide confidence that the program conforms to its requirements specification; 2. Provide confidence that the computer program has been adequately evaluated and tested; 3. Provide confidence that program changes are adequately evaluated, tested, and controlled; and 4. Enhance assurance that reliable data will be produced for engineering, scientific, and safety analysis purposes

  15. Automation of program model developing for complex structure control objects

    International Nuclear Information System (INIS)

    Ivanov, A.P.; Sizova, T.B.; Mikhejkina, N.D.; Sankovskij, G.A.; Tyufyagin, A.N.

    1991-01-01

    A brief description of software for automated developing the models of integrating modular programming system, program module generator and program module library providing thermal-hydraulic calcualtion of process dynamics in power unit equipment components and on-line control system operation simulation is given. Technical recommendations for model development are based on experience in creation of concrete models of NPP power units. 8 refs., 1 tab., 4 figs

  16. South African Medical Journal - Vol 88, No 3 (1998)

    African Journals Online (AJOL)

    Tuberculosis and anorexia nervosa · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. Christopher Paul Szabo, 275-276. Books Advances in Pediatric Pulmonology. Pediatric and Adolescent Medicine Vol. 7 · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  17. International Journal of Development and Policy Studies - Vol 2, No ...

    African Journals Online (AJOL)

    International Journal of Development and Policy Studies - Vol 2, No 1 (2006) .... Locating oppressive use of language: a study of linguistic violence on nigerian ... trafficking - poverty link based on urban development and planning process ...

  18. African Journal of Clinical and Experimental Microbiology - Vol 5, No ...

    African Journals Online (AJOL)

    African Journal of Clinical and Experimental Microbiology - Vol 5, No 3 (2004) ... In Peripheral Leukocyte And Body Fluids Of Onchocerciasis Patients Treated With ... A Study Of Asymptomatic Bacteriuria In Pregnancy In Ile - Ife, Southwestern ...

  19. African Journal of Chemical Education - Vol 7, No 1 (2017)

    African Journals Online (AJOL)

    African Journal of Chemical Education - Vol 7, No 1 (2017). Journal Home ... Hybridization and molecular geometry: A number game · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT DOWNLOAD ... AJOL African Journals Online. HOW TO ...

  20. Advanced Emissions Control Development Program

    Energy Technology Data Exchange (ETDEWEB)

    A.P.Evans; K.E. Redinger; M.J. Holmes

    1998-04-01

    The objective of the Advanced Emissions Control Development Program (AECDP) is to develop practical, cost-effective strategies for reducing the emissions of air toxics from coal-fired boilers. Ideally, the project aim is to effectively control air toxic emissions through the use of conventional flue gas cleanup equipment such as electrostatic precipitators (ESPS), fabric filters (baghouse), and wet flue gas desulfurization. Development work to date has concentrated on the capture of mercury, other trace metals, fine particulate and hydrogen chloride. Following the construction and evaluation of a representative air toxics test facility in Phase I, Phase II focused on the evaluation of mercury and several other air toxics emissions. The AECDP is jointly funded by the United States Department of Energy's Federal Energy Technology Center (DOE), the Ohio Coal Development Office within the Ohio Department of Development (oCDO), and Babcock& Wilcox-a McDermott company (B&W).

  1. Artificial intelligence programming with LabVIEW: genetic algorithms for instrumentation control and optimization.

    Science.gov (United States)

    Moore, J H

    1995-06-01

    A genetic algorithm for instrumentation control and optimization was developed using the LabVIEW graphical programming environment. The usefulness of this methodology for the optimization of a closed loop control instrument is demonstrated with minimal complexity and the programming is presented in detail to facilitate its adaptation to other LabVIEW applications. Closed loop control instruments have variety of applications in the biomedical sciences including the regulation of physiological processes such as blood pressure. The program presented here should provide a useful starting point for those wishing to incorporate genetic algorithm approaches to LabVIEW mediated optimization of closed loop control instruments.

  2. Controller design approach based on linear programming.

    Science.gov (United States)

    Tanaka, Ryo; Shibasaki, Hiroki; Ogawa, Hiromitsu; Murakami, Takahiro; Ishida, Yoshihisa

    2013-11-01

    This study explains and demonstrates the design method for a control system with a load disturbance observer. Observer gains are determined by linear programming (LP) in terms of the Routh-Hurwitz stability criterion and the final-value theorem. In addition, the control model has a feedback structure, and feedback gains are determined to be the linear quadratic regulator. The simulation results confirmed that compared with the conventional method, the output estimated by our proposed method converges to a reference input faster when a load disturbance is added to a control system. In addition, we also confirmed the effectiveness of the proposed method by performing an experiment with a DC motor. © 2013 ISA. Published by ISA. All rights reserved.

  3. A novel Python program for implementation of quality control in the ELISA.

    Science.gov (United States)

    Wetzel, Hanna N; Cohen, Cinder; Norman, Andrew B; Webster, Rose P

    2017-09-01

    The use of semi-quantitative assays such as the enzyme-linked immunosorbent assay (ELISA) requires stringent quality control of the data. However, such quality control is often lacking in academic settings due to unavailability of software and knowledge. Therefore, our aim was to develop methods to easily implement Levey-Jennings quality control methods. For this purpose, we created a program written in Python (a programming language with an open-source license) and tested it using a training set of ELISA standard curves quantifying the Fab fragment of an anti-cocaine monoclonal antibody in mouse blood. A colorimetric ELISA was developed using a goat anti-human anti-Fab capture method. Mouse blood samples spiked with the Fab fragment were tested against a standard curve of known concentrations of Fab fragment in buffer over a period of 133days stored at 4°C to assess stability of the Fab fragment and to generate a test dataset to assess the program. All standard curves were analyzed using our program to batch process the data and to generate Levey-Jennings control charts and statistics regarding the datasets. The program was able to identify values outside of two standard deviations, and this identification of outliers was consistent with the results of a two-way ANOVA. This program is freely available, which will help laboratories implement quality control methods, thus improving reproducibility within and between labs. We report here successful testing of the program with our training set and development of a method for quantification of the Fab fragment in mouse blood. Copyright © 2017 Elsevier B.V. All rights reserved.

  4. Afican Health Sciences Vol 9 No 1.pmd

    African Journals Online (AJOL)

    Administrator

    African Health Sciences Vol 9 No 1 March 2009. 41 compounds isolated from the extracts can be applied as weed killers and have been tested on the water hyacinth .... dispensing serial dilutions of the test extract, concentrations ranging from 5.0 mg/ml to 50.0 mg/ ml. McFarland No.1 standard was used in the preparation ...

  5. International Journal of Health Research - Vol 2, No 4 (2009)

    African Journals Online (AJOL)

    International Journal of Health Research - Vol 2, No 4 (2009) ... Psychosocial characteristics of patients admitted to a drug rehabilitation unit in Nigeria · EMAIL ... Hepatoprotective and antioxidant activities of fruit pulp of limonia acidissima linn ...

  6. West African Journal of Industrial and Academic Research - Vol 4 ...

    African Journals Online (AJOL)

    West African Journal of Industrial and Academic Research - Vol 4, No 1 (2012) ... Open Access DOWNLOAD FULL TEXT Subscription or Fee Access ... on Gas Turbine Engine Data · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  7. Approximate Dynamic Programming in Tracking Control of a Robotic Manipulator

    Directory of Open Access Journals (Sweden)

    Marcin Szuster

    2016-02-01

    Full Text Available This article focuses on the implementation of an approximate dynamic programming algorithm in the discrete tracking control system of the three-degrees of freedom Scorbot-ER 4pc robotic manipulator. The controlled system is included in an articulated robots group which uses rotary joints to access their work space. The main part of the control system is a dual heuristic dynamic programming algorithm that consists of two structures designed in the form of neural networks: an actor and a critic. The actor generates the suboptimal control law while the critic approximates the difference of the value function from Bellman's equation with respect to the state. The residual elements of the control system are the PD controller, the supervisory term and an additional control signal. The structure of the supervisory term derives from the stability analysis performed using the Lyapunov stability theorem. The control system works online, the neural networks' weights-adaptation procedure is performed in every iteration step, and the neural networks' preliminary learning process is not required. The performance of the control system was verified by a series of computer simulations and experiments performed using the Scorbot-ER 4pc robotic manipulator.

  8. Optimal control of a programmed motion of a rigid spacecraft using redundant kinematics parameterizations

    International Nuclear Information System (INIS)

    El-Gohary, Awad

    2005-01-01

    This paper considers the problem of optimal controlling of a programmed motion of a rigid spacecraft. Given a cost of the spacecraft as a quadratic function of state and control variables we seek for optimal control laws as functions of the state variables and the angle of programmed rotation that minimize this cost and asymptotically stabilize the required programmed motion. The stabilizing properties of the proposed controllers are proved using the optimal Liapunov techniques. Numerical simulation study is presented

  9. Structural optimization of static power control programs of nuclear power plants with WWER-1000

    International Nuclear Information System (INIS)

    Kokol, E.O.

    2015-01-01

    The question of possibility the power control programs switching for WWER-1000 is considered. The aim of this research is to determine the best program for the power control of nuclear reactor under cyclic diurnal behavior of electrical generation, as well as the switching implementation. The considered problem of finding the best control program refers to the multicriteria optimization class of problems. Operation of the nuclear power generation system simulated using the following power control programs: with constant average temperature of transfer fluid, with constant pressure in the reactor secondary circuit, with constant temperature in input of the nuclear reactor. The target function was proposed. It consists of three normalized criteria: the burn up fraction, the damage level of fuel rod array shells, as well as changes in the power values. When simulation of the nuclear power generation system operation within the life was done, the values of the selected criteria were obtained and inserted in the target function. The minimum of three values of the target function depending on the control program at current time defined the criterion of switching of considered static power control programs for nuclear power generation system

  10. Journal of Business Research - Vol 6, No 1-2 (2012)

    African Journals Online (AJOL)

    Journal of Business Research - Vol 6, No 1-2 (2012) ... Economic Cost of Breast Cancer in Ghana: The Komfo Anokye Teaching Hospital ... Capital Adequacy and the Performance of Ghanaian Banks · EMAIL FULL TEXT EMAIL FULL TEXT

  11. West African Journal of Industrial and Academic Research - Vol 17 ...

    African Journals Online (AJOL)

    West African Journal of Industrial and Academic Research - Vol 17, No 1 (2017) ... Open Access DOWNLOAD FULL TEXT Subscription or Fee Access ... The effect of electricity and gas losses on Nigeria`s Gross Domestic Product · EMAIL ...

  12. Studies in Gender and Development in Africa - Vol 2 (2008)

    African Journals Online (AJOL)

    Studies in Gender and Development in Africa - Vol 2 (2008) ... I don't love my husband” Advice Columns as Teaching Resource for Gender and Sexuality: Experiences from the University of Cape Coast, Ghana ... Current Issue Atom logo

  13. BIRD/WILDLIFE STRIKE CONTROL FOR SAFER AIR ...

    African Journals Online (AJOL)

    Osondu

    2012-06-05

    Jun 5, 2012 ... Keywords: bird/wildlife, strike, aviation, hazard, control. Introduction ... Ethiopian Journal of Environmental Studies and Management EJESM Vol. 5 No. 3 2012 .... Aircraft Bird. Strike Avoidance Rader System (ABARS) and.

  14. African Journal for Physical Activity and Health Sciences - Vol 21 ...

    African Journals Online (AJOL)

    African Journal for Physical Activity and Health Sciences - Vol 21, No 3 (2015) ... Factors Influencing the Health of Men in Polygynous Relationship · EMAIL FULL ... Views of HIV Positive Pregnant Women on Accessibility of the Prevention of ...

  15. Journal of Community Medicine and Primary Health Care - Vol 23 ...

    African Journals Online (AJOL)

    Journal of Community Medicine and Primary Health Care - Vol 23, No 1-2 (2011) ... The Nigerian National Health Bill 2011: Delay of Presidential Assent to an Act: ... Knowledge And Practice of Occupational Safety Among Quarry Workers in A ...

  16. Nigerian Journal of Chemical Research Vol. 20, 2015 39 Seasonal ...

    African Journals Online (AJOL)

    Dr M Waziri

    Vol. 20, 2015. 39. Seasonal Variations in Physicochemical Properties of Water, Sediment and Fish of ... The levels of some physicochemical parameters in the dam water were determined in wet and dry seasons .... Water, Waste and Health in ...

  17. Wellness program for anesthesiology residents: a randomized, controlled trial.

    Science.gov (United States)

    Saadat, H; Snow, D L; Ottenheimer, S; Dai, F; Kain, Z N

    2012-10-01

    Multiple reports illustrate the deleterious effects of stress on physicians' mental and physical health, as well as on patient care. This study evaluates the effects of a wellness program on anesthesiology residents' well-being. Sixty residents were randomly assigned to one of three groups: (1) wellness intervention group, (2) no-treatment control with release time, and (3) no-treatment control with routine duties. Coping, stressors, social support, psychological symptoms, and alcohol and tobacco use were measured using a pre-test-post-test design. Residents in the wellness program reported significantly fewer stressors in their role as parent, increased social support at work, greater problem-solving coping, and less anxiety as compared with one or both of the control groups. Findings related to reducing avoidance coping and alcohol consumption also were suggestive of positive intervention effects. An intervention to increase the use of active coping and social support, to reduce reliance on avoidance coping, and to decrease work and family stressors had an overall pattern of beneficial effects on residents' well-being. The importance of offering such programs during residency training, ways to strengthen intervention effectiveness, and areas for future research are discussed. © 2012 The Authors. Acta Anaesthesiologica Scandinavica © 2012 The Acta Anaesthesiologica Scandinavica Foundation.

  18. Rhodium. Suppl. Vol. B1

    International Nuclear Information System (INIS)

    Griffith, W.P.; Jehn, H.; McCleverty, J.A.; Raub, C.J.; Robinson, S.D.

    1982-01-01

    The present rhodium vol. B1 is concerned largely with linary compounds and coordination complexes of this important metal, which is used either alone or in alloy form for fabrication of other materials or for heterogeneous catalysis. In first two chapters are devoted for hydrides, oxides, ternary and quaternary oxorhodates. Third chapter is on different type of complexes with nitrogen. From chapter four to seven is on halogen complexes with this metal. Next chapters are on sulphides, sulphoxide and sulphito complexes, sulphates and sulphato complexes, selenides and tellurides, borides, borane complexes, carbides, carbonato, cyno, fulminato and thiocyanato complexes. Finally, silicide, phosphides, phosphito and arsenides are treated over here. (AB)

  19. Journal of EEA, Vol. 30, 2013 SIEVE TRAY EFFICIENCY USING ...

    African Journals Online (AJOL)

    dell

    Journal of EEA, Vol. 30, 2013. SIEVE TRAY EFFICIENCY USING CFD MODELING AND SIMULATION ... ABSTRACT. In this work, computational fluid dynamics (CFD) .... per unit volume, MG is the molecular weight of the gas/vapor, kL and kG ...

  20. Simulation of the control rod drop under seismic excitations. Experimental program

    International Nuclear Information System (INIS)

    Chaudat, Th.

    2001-01-01

    This paper describes the experimental program that will be performed at the end of 1998 at the CEA Saclay on a specially constructed analytical mock-up of a control rod. The purpose of these tests is to partially validate the current methodology of the drop time numerical calculations of a PWR (pressurized water reactor) control rod under seismic excitations. The French nuclear partners (EDF and FRAMATOME) are involved in this program. (author)

  1. Federal Programs Supporting Educational Change, Vol. VII: Factors Affecting Implementation and Continuation.

    Science.gov (United States)

    Berman, Paul; And Others

    This report is one of three volumes that describe the second phase of a study that examined the implementation of four federal change agent programs related to education. Phase 2 of the study focused on what happens to local projects in the two largest change agent programs--ESEA Title III and ESEA Title VII--when federal funding stops. This…

  2. South African Journal of Education - Vol 28, No 4 (2008)

    African Journals Online (AJOL)

    South African Journal of Education - Vol 28, No 4 (2008) ... in Italian high-school prospective mathematics and physics teachers · EMAIL FREE FULL TEXT ... Critical thinking: are the ideals of OBE failing us or are we failing the ideals of OBE?

  3. South African Journal of Education - Vol 31, No 1 (2011)

    African Journals Online (AJOL)

    South African Journal of Education - Vol 31, No 1 (2011) ... How an analysis of reviewers' reports can enhance the quality of submissions to a journal of education ... Doctoral learning: a case for a cohort model of supervision and support ...

  4. A combined stochastic programming and optimal control approach to personal finance and pensions

    DEFF Research Database (Denmark)

    Konicz, Agnieszka Karolina; Pisinger, David; Rasmussen, Kourosh Marjani

    2015-01-01

    The paper presents a model that combines a dynamic programming (stochastic optimal control) approach and a multi-stage stochastic linear programming approach (SLP), integrated into one SLP formulation. Stochastic optimal control produces an optimal policy that is easy to understand and implement....

  5. Experimental control of a fluidic pinball using genetic programming

    Science.gov (United States)

    Raibaudo, Cedric; Zhong, Peng; Noack, Bernd R.; Martinuzzi, Robert J.

    2017-11-01

    The wake stabilization of a triangular cluster of three rotating cylinders was investigated in the present study. Experiments were performed at Reynolds number Re 6000, and compared with URANS-2D simulations at same flow conditions. 2D2C PIV measurements and constant temperature anemometry were used to characterize the flow without and with actuation. Open-loop actuation was first considered for the identification of particular control strategies. Machine learning control was also implemented for the experimental study. Linear genetic programming has been used for the optimization of open-loop parameters and closed-loop controllers. Considering a cost function J based on the fluctuations of the velocity measured by the hot-wire sensor, significant performances were achieved using the machine learning approach. The present work is supported by the senior author's (R. J. Martinuzzi) NSERC discovery Grant. C. Raibaudo acknowledges the financial support of the University of Calgary Eyes-High PDF program.

  6. Annual Conference on Manual Control (20th) Held in California on June 12 - 14, 1984. Volume 1

    Science.gov (United States)

    1984-06-14

    Semisupine Pilot", Avimtion Space and Environmental Medicine , vol. 49, No. 1, pp. 304-317, January, 1978. [5] Levison, W.H., "Model For Human Controller...Performance in Vibration Environment", Aviation Space and Environmental Medicine , vol. 49, No. 1, pp. 321-327, January, 1978. [6] Repperger, D. W...Schwartz, Anthony C. Stein, Raymond E. Magdaleno, and Jeffrey R. Hogue, Effects of Alcohol and Marihuana on Driver Control Behavior. Volume I: Laboratory

  7. Quality control in screening programs for cervical cancer

    International Nuclear Information System (INIS)

    Sarduy Napoles, Miguel

    2012-01-01

    The malignancy of the cervix is one of the few locations avoidable cancers, if detected before it progresses to the infiltration. The most efficient way of early detection is through a screening program to provide women undertaking a regular and quality Pap smear. If this test results abnormal, the program offers easier access to specialized care, effective treatment, and follow-up. The objective of this article is to present usefulness of methods for quality control used in screening programs for cervical cancer to detect their inadequacies. Here are some factors and conditions that must be considered in each of the steps to take, for a cervical cancer screening program to be successful and to meet the objectives proposed in reducing mortality due to this cause. This document contains some useful indexes calculated to ensure quality throughout the process. There should be the measurement of quality throughout the screening process that allows collecting of reliable data as well as correcting deficiencies

  8. 78 FR 26879 - Medicare Program; Inpatient Rehabilitation Facility Prospective Payment System for Federal Fiscal...

    Science.gov (United States)

    2013-05-08

    ... Prospective Payment System for Federal Fiscal Year 2014; Proposed Rule #0;#0;Federal Register / Vol. 78, No... Program; Inpatient Rehabilitation Facility Prospective Payment System for Federal Fiscal Year 2014 AGENCY... IRF prospective payment system's (PPS) case-mix groups and a description of the methodology and data...

  9. African Journal of Finance and Management - Vol 8, No 2 (2000)

    African Journals Online (AJOL)

    African Journal of Finance and Management - Vol 8, No 2 (2000) ... Effects of Mergers and Acquisitions to Shareholders' Wealth: Evidence from the United Kingdom. ... Matching Managerial Skills and Behaviour with Business Strategy - ...

  10. Sophia: An African Journal of Philosophy - Vol 10, No 2 (2008)

    African Journals Online (AJOL)

    Sophia: An African Journal of Philosophy - Vol 10, No 2 (2008) ... Spiritual intelligence (SQ), leadership and good governance: A treatise ... Traditional religion of Ogbaland: Distinguishing characteristics · EMAIL FULL TEXT EMAIL FULL TEXT

  11. Global Journal of Medical Sciences - Vol 10, No 1-2 (2011)

    African Journals Online (AJOL)

    Global Journal of Medical Sciences - Vol 10, No 1-2 (2011) ... Implications for Global Standards to Promote International Collaboration and Advanced ... Clinical Nursing Research: A Tool for Professional Development · EMAIL FREE FULL ...

  12. Aquatic Plant Control Research Program. Volume A-00-1

    National Research Council Canada - National Science Library

    Kirk, James

    2000-01-01

    ... at the Waterways Experiment Station. It is principally intended to be a forum whereby information pertaining to and resulting from the Corps of Engineers' nationwide Aquatic Plant Control Research Program (APCRP...

  13. Optimal traffic control in highway transportation networks using linear programming

    KAUST Repository

    Li, Yanning; Canepa, Edward S.; Claudel, Christian G.

    2014-01-01

    of the Hamilton-Jacobi PDE, the problem of controlling the state of the system on a network link in a finite horizon can be posed as a Linear Program. Assuming all intersections in the network are controllable, we show that the optimization approach can

  14. Discrete Globalised Dual Heuristic Dynamic Programming in Control of the Two-Wheeled Mobile Robot

    OpenAIRE

    Marcin Szuster; Zenon Hendzel

    2014-01-01

    Network-based control systems have been emerging technologies in the control of nonlinear systems over the past few years. This paper focuses on the implementation of the approximate dynamic programming algorithm in the network-based tracking control system of the two-wheeled mobile robot, Pioneer 2-DX. The proposed discrete tracking control system consists of the globalised dual heuristic dynamic programming algorithm, the PD controller, the supervisory term, and an additional control signal...

  15. 76 FR 15105 - Medicare and Medicaid Programs; Civil Money Penalties for Nursing Homes

    Science.gov (United States)

    2011-03-18

    ... Services 42 CFR Part 488 [CMS-2435-F] Medicare and Medicaid Programs; Civil Money Penalties for Nursing... incentives for quality improvement, and to remove uncertainty for nursing homes, we proposed to set the... Vol. 76 Friday, No. 53 March 18, 2011 Part III Department of Health and Human Services Centers for...

  16. Near-Optimal Tracking Control of Mobile Robots Via Receding-Horizon Dual Heuristic Programming.

    Science.gov (United States)

    Lian, Chuanqiang; Xu, Xin; Chen, Hong; He, Haibo

    2016-11-01

    Trajectory tracking control of wheeled mobile robots (WMRs) has been an important research topic in control theory and robotics. Although various tracking control methods with stability have been developed for WMRs, it is still difficult to design optimal or near-optimal tracking controller under uncertainties and disturbances. In this paper, a near-optimal tracking control method is presented for WMRs based on receding-horizon dual heuristic programming (RHDHP). In the proposed method, a backstepping kinematic controller is designed to generate desired velocity profiles and the receding horizon strategy is used to decompose the infinite-horizon optimal control problem into a series of finite-horizon optimal control problems. In each horizon, a closed-loop tracking control policy is successively updated using a class of approximate dynamic programming algorithms called finite-horizon dual heuristic programming (DHP). The convergence property of the proposed method is analyzed and it is shown that the tracking control system based on RHDHP is asymptotically stable by using the Lyapunov approach. Simulation results on three tracking control problems demonstrate that the proposed method has improved control performance when compared with conventional model predictive control (MPC) and DHP. It is also illustrated that the proposed method has lower computational burden than conventional MPC, which is very beneficial for real-time tracking control.

  17. Communicating program outcomes to encourage policymaker support for evidence-based state tobacco control.

    Science.gov (United States)

    Schmidt, Allison M; Ranney, Leah M; Goldstein, Adam O

    2014-12-04

    Tobacco use, the leading cause of preventable death in the U.S., can be reduced through state-level tobacco prevention and cessation programs. In the absence of research about how to communicate the need for these programs to policymakers, this qualitative study aimed to understand the motivations and priorities of policymakers in North Carolina, a state that enacted a strong tobacco control program from 2003-2011, but drastically reduced funding in recent years. Six former legislators (three Democrats, three Republicans) and three lobbyists for health organizations were interviewed about their attitudes towards tobacco use, support of state-funded programs, and reactions to two policy briefs. Five themes emerged: (1) high awareness of tobacco-related health concerns but limited awareness of program impacts and funding, (2) the primacy of economic concerns in making policy decisions, (3) ideological differences in views of the state's role in tobacco control, (4) the impact of lobbyist and constituent in-person appeals, and (5) the utility of concise, contextualized data. These findings suggest that building relationships with policymakers to communicate ongoing program outcomes, emphasizing economic data, and developing a constituent advocacy group would be valuable to encourage continued support of state tobacco control programs.

  18. Provably Correct Control-Flow Graphs from Java Programs with Exceptions

    NARCIS (Netherlands)

    Amighi, A.; de Carvalho Gomes, Pedro; Huisman, Marieke

    2011-01-01

    We present an algorithm to extract flow graphs from Java bytecode, focusing on exceptional control flows. We prove its correctness, meaning that the behaviour of the extracted control-flow graph is an over-approximation of the behaviour of the original program. Thus any safety property that holds

  19. Designing single phase Current-Programmed-Controlled rectifiers by harmonic currents

    DEFF Research Database (Denmark)

    Andersen, Gert Karmisholt; Blaabjerg, Frede

    2002-01-01

    The grid current harmonics of a Current-Programmed-Controlled (CPC) pfc rectifier strongly depends on the choice of switching frequency and switching inductance. This paper describes a new simple and vert fast method to calculate the grid current of a CPC controlled pfc converter. The method...

  20. Fabrication and Characterization of 5 vol.% (Al2O3p + 8 vol.% (Al2O3f/A336 Hybrid Micron and Nano-Composites

    Directory of Open Access Journals (Sweden)

    Ren Luyang

    2017-01-01

    Full Text Available Hybrid composites are fabricated by adding two reinforcements into matrix materials so that the expected excellent properties can be achieved through the combined advantages of short fibres, and different size particles (micron or nano, which provide a high degree of design freedom. In this paper, hybrid preforms were produced with the different size reinforcement of the Al2O3 particles and short fibres. The Al-Si alloy-based hybrid composites reinforced by 5 vol. % Al2O3 particles and 8 vol. % Al2O3 fibres were fabricated by preform-squeezing casting route. The structure and performance of composite materials were studied with Transmission Electron Microscopy (TEM and Scanning Electron Microscopy (SEM. The results show that the reinforcements, both particles and fibres, distribute homogeneously in the matrix materials, and the properties of composites are found to improve in comparison with the matrix Al-Si alloy.

  1. Staffing and structure of infection prevention and control programs.

    Science.gov (United States)

    Stone, Patricia W; Dick, Andrew; Pogorzelska, Monika; Horan, Teresa C; Furuya, E Yoko; Larson, Elaine

    2009-06-01

    The nature of infection prevention and control is changing; however, little is known about current staffing and structure of infection prevention and control programs. Our objectives were to provide a snapshot of the staffing and structure of hospital-based infection prevention and control programs in the United States. A Web-based survey was sent to 441 hospitals that participate in the National Healthcare Safety Network. The response rate was 66% (n = 289); data were examined on 821 professionals. Infection preventionist (IP) staffing was significantly negatively related to bed size, with higher staffing in smaller hospitals (P hospital epidemiologists were reported to have authority to close beds for outbreaks always or most of the time (n = 225, 78%). Only 32% (n = 92) reported using an electronic surveillance system to track infections. This study is the first to provide a comprehensive description of current infection prevention and control staffing, organization, and support in a select group of hospitals across the nation. Further research is needed to identify effective staffing levels for various hospital types as well as examine how the IP role is changing over time.

  2. Object oriented programming techniques applied to device access and control

    International Nuclear Information System (INIS)

    Goetz, A.; Klotz, W.D.; Meyer, J.

    1992-01-01

    In this paper a model, called the device server model, has been presented for solving the problem of device access and control faced by all control systems. Object Oriented Programming techniques were used to achieve a powerful yet flexible solution. The model provides a solution to the problem which hides device dependancies. It defines a software framework which has to be respected by implementors of device classes - this is very useful for developing groupware. The decision to implement remote access in the root class means that device servers can be easily integrated in a distributed control system. A lot of the advantages and features of the device server model are due to the adoption of OOP techniques. The main conclusion that can be drawn from this paper is that 1. the device access and control problem is adapted to being solved with OOP techniques, 2. OOP techniques offer a distinct advantage over traditional programming techniques for solving the device access problem. (J.P.N.)

  3. Egyptian Journal of Medical Human Genetics - Vol 14, No 3 (2013)

    African Journals Online (AJOL)

    Egyptian Journal of Medical Human Genetics - Vol 14, No 3 (2013) ... Comparative study: Parameters of gait in Down syndrome versus matched obese and ... episodes in a Japanese child: Clinical, radiological and molecular genetic analysis ...

  4. Arvustuse piirid ja auhinnad : mõtteid kirjanduskriitikast vol 2 / Jan Kaus

    Index Scriptorium Estoniae

    Kaus, Jan, 1971-

    2007-01-01

    Tänapäeva eesti kirjanduskriitikast. Vt. ka vol. 1: Kaus, Jan. Eetika, taburetiefekt ja jätkuv objektivisatsioon, Sirp, 15. juuni., lk. 7. Vastukaja: Raudam, Toomas. Arvustuse piiritused //Sirp (2007) 10. aug., lk. 9

  5. South African Journal of Higher Education - Vol 16, No 2 (2002)

    African Journals Online (AJOL)

    South African Journal of Higher Education - Vol 16, No 2 (2002) ... Rewarding quality teaching in higher education: the evading dream? ... Employers' perceptions of the profile of MBA graduates · EMAIL FULL TEXT EMAIL FULL TEXT

  6. International Journal of Natural and Applied Sciences - Vol 5, No 2 ...

    African Journals Online (AJOL)

    International Journal of Natural and Applied Sciences - Vol 5, No 2 (2009) ... Illustration of decimation in digital signal processing (DSP) systems using ... of diesel polluted soils on hydrocarbon-utilizing microbial counts and oil degradation ...

  7. Lwati: A Journal of Contemporary Research - Vol 10, No 3 (2013)

    African Journals Online (AJOL)

    Lwati: A Journal of Contemporary Research - Vol 10, No 3 (2013) ... Evaluation of Social Studies Curriculum on Compassion Dispositions in Students of ... European Trading Companies and Economic Development in the Cross River Basin of ...

  8. Project control support services for the National Waste Terminal Storage Program

    International Nuclear Information System (INIS)

    1977-12-01

    The Boeing Engineering and Construction Company has the responsibility to recommend and assist in designing and implementing a project control system for the Office of Waste Isolation. BEC, after analysis of the OWI management structure and techniques utilized, has recommended the implementation of a Program Control System (PCS) for use by OWI. This system embraces the scope of management needs for visibility and control of cost and schedule performance as well as providing a framework for all the various segments of a complete program control system. Because of the schedule constraints placed on OWI by DOE it was not deemed practical to implement all segments of PCS but rather those that are basic to the concept and can return the greatest short-term benefit. The area of cost and schedule control appears to provide the greatest benefit when combined with the control room techniques for visibility and control. Technical performance is not covered in this report. The segment of PCS titled Integrated Cost/Schedule (IC/S) was used to identify those functions unique to cost and schedule control

  9. Baltische Musik für Streichorchester (Vol. 2) / Hans-Christian Dadelsen

    Index Scriptorium Estoniae

    Dadelsen, Hans-Christian

    1995-01-01

    Uuest heliplaadist "Baltische Musik für Streichorchester (Vol. 2). Ostrobothnian Chamber Orchestra, Juha Kangas". Finlandia/East West Records CD 4509-9789-2 (WD: 64'34") Plaadil ka Erkki-Sven Tüüri teos "Insula Deserta"

  10. Journal of Agriculture and Social Research, Vol. 13, No.1, 2013 ...

    African Journals Online (AJOL)

    Adesope

    Journal of Agriculture and Social Research, Vol. 13, No.1, 2013. 56. EFFECT .... respondents who would soon become young entrepreneurs after their training period. The .... world congress on public health, Rio de Janeiro, Brazil. Mohammed ...

  11. Proceedings of the third arab conference on the peaceful uses of atomic energy, vol.a,b

    International Nuclear Information System (INIS)

    El-Mashri, S.M.

    1998-06-01

    The publication has been set up as a textbook for peaceful uses of atomic energy vol.A: (1) reactor,materials,energy; (2) nuclear raw materials; (3) radiocesium-waste; (4) nuclear safety; (5) nuclear physics; (6) radiochemistry; (7) radiobiology; vol.B: (1) nuclear medicine; (2) agriculture and soil science; (3) isotope hydrology; (4) food preservation; (5) insect eradication; (6 )industrial application; (7) nuclear activation analysis; (8) health physics and environmental studies

  12. Proceedings of the third arab conference on the peaceful uses of atomic energy, vol.a,b

    Energy Technology Data Exchange (ETDEWEB)

    El-Mashri, S M [ed.

    1998-06-01

    The publication has been set up as a textbook for peaceful uses of atomic energy vol.A: (1) reactor,materials,energy; (2) nuclear raw materials; (3) radiocesium-waste; (4) nuclear safety; (5) nuclear physics; (6) radiochemistry; (7) radiobiology; vol.B: (1) nuclear medicine; (2) agriculture and soil science; (3) isotope hydrology; (4) food preservation; (5) insect eradication; (6 )industrial application; (7) nuclear activation analysis; (8) health physics and environmental studies.

  13. Institutional Control Program: Long Term Care and Control of Decommissioned Mine/Mill Sites Located on Crown Land

    International Nuclear Information System (INIS)

    Cunningham, K.

    2014-01-01

    Institutional Control Program: • Establishes an endpoint for mining company activities on sites located on Crown land; • Establishes funding for the long-term care and control of the closed sites; • Company responsibilities for sites under the Environmental Management and Protection Act remain; • Establishes an Institutional Control Registry; • Establishes an Institutional Control Monitoring and Maintenance Fund and an Institutional Control Unforeseen Events Fund

  14. Strong tobacco control program requirements and secure funding are not enough: lessons from Florida.

    Science.gov (United States)

    Kennedy, Allison; Sullivan, Sarah; Hendlin, Yogi; Barnes, Richard; Glantz, Stanton

    2012-05-01

    Florida's Tobacco Pilot Program (TPP; 1998-2003), with its edgy Truth media campaign, achieved unprecedented youth smoking reductions and became a model for tobacco control programming. In 2006, 3 years after the TPP was defunded, public health groups restored funding for tobacco control programming by convincing Florida voters to amend their constitution. Despite the new program's strong legal structure, Governor Charlie Crist's Department of Health implemented a low-impact program. Although they secured the program's strong structure and funding, Florida's nongovernmental public health organizations did not mobilize to demand a high-impact program. Implementation of Florida's Amendment 4 demonstrates that a strong programmatic structure and secure funding are insufficient to ensure a successful public health program, without external pressure from nongovernmental groups.

  15. Knowledge Gaps Impacting the Development of Bovine Viral Diarrhea Virus Control Programs in the United States

    Science.gov (United States)

    This paper identifies knowledge gaps that impact on the design of programs to control and or eradicate bovine viral diarrhea viruses (BVDV) in the United States. Currently there are several voluntary regional BVDV control programs in place. These control programs are aimed at the removal of animals ...

  16. The genetic algorithm for the nonlinear programming of water pollution control system

    Energy Technology Data Exchange (ETDEWEB)

    Wei, J.; Zhang, J. [China University of Geosciences (China)

    1999-08-01

    In the programming of water pollution control system the combined method of optimization with simulation is used generally. It is not only laborious in calculation, but also the global optimum of the obtained solution is guaranteed difficult. In this paper, the genetic algorithm (GA) used in the nonlinear programming of water pollution control system is given, by which the preferred conception for the programming of waste water system is found in once-through operation. It is more succinct than the conventional method and the global optimum of the obtained solution could be ensured. 6 refs., 4 figs., 3 tabs.

  17. Substâncias voláteis em mel floral e mel de melato

    Directory of Open Access Journals (Sweden)

    CAMPOS Gisélia

    2000-01-01

    Full Text Available Embora pareça existir um "flavor" característico de mel, a grande variedade de flores disponíveis para a abelha, possibilita uma grande diversidade de flavor e aroma, indicando a presença de vários componentes voláteis. Alguns destes dependem da fisiologia da abelha, dos procedimentos após a colheita e no mel de melato há também a interferência de insetos sugadores e das formigas. Várias substâncias voláteis já foram identificadas, sendo algumas características de determinados méis uniflorais. Com o objetivo de encontrar uma substância volátil característica do mel de melato, seis amostras deste tipo de mel e seis amostras de mel floral foram analisadas usando extração por arraste de gás hidrogênio e cromatografia a gás acoplada a espectrometria de massas. Ácido acético foi encontrado em quatro amostras de mel de melato e em uma amostra de mel floral porém, com menor abundância.

  18. South African Journal of Animal Science - Vol 30, No 2 (2000)

    African Journals Online (AJOL)

    South African Journal of Animal Science - Vol 30, No 2 (2000) ... Relationship between performance measurements and sale price of Dorper rams in the Northern Cape ... Factors affecting goat production in a communal farming system in the ...

  19. International Journal of Arts and Humanities (IJAH) Ethiopia Vol. 7 (1 ...

    African Journals Online (AJOL)

    Prof

    2018-01-24

    Jan 24, 2018 ... International Journal of Arts and Humanities (IJAH). Ethiopia. Vol. 7 (1), S/No ... Department of International and Strategic Studies. Faculty of Arts and ..... American political science review, 98(01), 171-. 189. Stiglitz, J. (2002).

  20. Spent Nuclear Fuel Project document control and Records Management Program Description

    International Nuclear Information System (INIS)

    MARTIN, B.M.

    2000-01-01

    The Spent Nuclear Fuel (SNF) Project document control and records management program, as defined within this document, is based on a broad spectrum of regulatory requirements, Department of Energy (DOE) and Project Hanford and SNF Project-specific direction and guidance. The SNF Project Execution Plan, HNF-3552, requires the control of documents and management of records under the auspices of configuration control, conduct of operations, training, quality assurance, work control, records management, data management, engineering and design control, operational readiness review, and project management and turnover. Implementation of the controls, systems, and processes necessary to ensure compliance with applicable requirements is facilitated through plans, directives, and procedures within the Project Hanford Management System (PHMS) and the SNF Project internal technical and administrative procedures systems. The documents cited within this document are those which directly establish or define the SNF Project document control and records management program. There are many peripheral documents that establish requirements and provide direction pertinent to managing specific types of documents that, for the sake of brevity and clarity, are not cited within this document

  1. IMPLICIT DUAL CONTROL BASED ON PARTICLE FILTERING AND FORWARD DYNAMIC PROGRAMMING.

    Science.gov (United States)

    Bayard, David S; Schumitzky, Alan

    2010-03-01

    This paper develops a sampling-based approach to implicit dual control. Implicit dual control methods synthesize stochastic control policies by systematically approximating the stochastic dynamic programming equations of Bellman, in contrast to explicit dual control methods that artificially induce probing into the control law by modifying the cost function to include a term that rewards learning. The proposed implicit dual control approach is novel in that it combines a particle filter with a policy-iteration method for forward dynamic programming. The integration of the two methods provides a complete sampling-based approach to the problem. Implementation of the approach is simplified by making use of a specific architecture denoted as an H-block. Practical suggestions are given for reducing computational loads within the H-block for real-time applications. As an example, the method is applied to the control of a stochastic pendulum model having unknown mass, length, initial position and velocity, and unknown sign of its dc gain. Simulation results indicate that active controllers based on the described method can systematically improve closed-loop performance with respect to other more common stochastic control approaches.

  2. [Analysis of the results of the SEIMC External Quality Control Program. Year 2011].

    Science.gov (United States)

    Ruiz de Gopegui Bordes, Enrique; Guna Serrano, M del Remedio; Orta Mira, Nieves; Ovies, María Rosario; Poveda, Marta; Gimeno Cardona, Concepción

    2013-02-01

    The External Quality Control Program of the Spanish Society of Infectious Diseases and Clinical Microbiology (Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica [SEIMC]) includes controls for bacteriology, serology, mycology, parasitology, mycobacteria, virology, and molecular microbiology. This article presents the most relevant conclusions and lessons from the 2011 controls. Overall, the results obtained in 2011 confirm the excellent skill and good technical standards found in previous years. Nevertheless, erroneous results can be obtained in any laboratory and in clinically relevant determinations. The results of this program highlight the need to implement both internal and external controls, such as those offered by the SEIMC program, in order to ensure maximal quality of microbiological tests. Copyright © 2013 Elsevier España, S.L. All rights reserved.

  3. An Adaptive Approach for Precise Underwater Vehicle Control in Combined Robot-Diver Operations

    Science.gov (United States)

    2015-03-01

    and Nicosia and Tomei [13] focused on industrial applications involving robotic manipulator arms carrying various loads. The application of...1987. 94 [13] S. Nicosia and P. Tomei, “Model reference adaptive control algorithms for industrial robots ,” Automatica, vol. 20, pp. 635–644, 9... kinematic and dynamic properties,” The International Journal of Robotics Research, vol. 25, pp. 283–296, March 01, 2006. [17] A. Sanei and M. French

  4. Egyptian Journal of Medical Human Genetics - Vol 13, No 2 (2012)

    African Journals Online (AJOL)

    Egyptian Journal of Medical Human Genetics - Vol 13, No 2 (2012) ... as independent indicators for B-CLL: Correlation to response to treatment and disease ... Profile of disorders of sexual differentiation in the Northeast region of Cairo, Egypt ...

  5. Sophia: An African Journal of Philosophy - Vol 13, No 1 (2010)

    African Journals Online (AJOL)

    Sophia: An African Journal of Philosophy - Vol 13, No 1 (2010) ... Letting die: A moral defence · EMAIL FULL TEXT EMAIL FULL TEXT ... Corporate culture: It's impact on corporate life and business practices in ... Current Issue Atom logo

  6. [The effects of a weight control program with competence].

    Science.gov (United States)

    Seo, Yeong-Mi; Suh, Sun-Lim

    2007-12-01

    The purpose of this study was to identify the effects of a weight control program and compliancy in overweight women. This program was composed of strategies to modify diet and exercise and to change compliance and self determination over an 8 week period. The subjects were 19 overweight women who participated in our project voluntarily. Data was collected from May 4 to June 30 of 2007. The program consisted of regular rapid walking exercise, diet, mobile phone messages and e-mail. The data was analyzed by Repeated Measures ANOVA using the SPSS WIN program. According to 3 assessment periods, there were significant differences in body weight, body mass index, and compliance. There were no significant differences in self determination. These findings suggest that more intensive interventions may be needed to demonstrate a change in self determination.

  7. HEALS: A Faith-Based Hypertension Control and Prevention Program for African American Churches: Training of Church Leaders as Program Interventionists.

    Science.gov (United States)

    Dodani, Sunita; Sullivan, Debra; Pankey, Sydney; Champagne, Catherine

    2011-01-01

    Background. A 12-session church-based HEALS program (healthy eating and living spiritually) was developed for hypertension control and prevention program in African Americans (AAs). This study presents specifics of training lay health educators to effectively deliver HEALS to high-risk AAs. Methods. A one-day workshop was conducted by the research experts in an AA church. Five church members were recruited to be program interventionists called church health counselors (CHCs). Results. Using principles of adult education, a training protocol was developed with the intention of recognizing and supporting CHCs skills. CHCs received training on delivering HEALS program. The process of training emphasized action methods including role playing and hands-on experience with diet portion measurements. Conclusion. With adequate training, the community lay health educator can be an essential partner in a community-based hypertension control programs. This may motivate program participants more and encourages the individual to make the behavior modifications on a permanent basis.

  8. Communicating Program Outcomes to Encourage Policymaker Support for Evidence-Based State Tobacco Control

    Directory of Open Access Journals (Sweden)

    Allison M. Schmidt

    2014-12-01

    Full Text Available Tobacco use, the leading cause of preventable death in the U.S., can be reduced through state-level tobacco prevention and cessation programs. In the absence of research about how to communicate the need for these programs to policymakers, this qualitative study aimed to understand the motivations and priorities of policymakers in North Carolina, a state that enacted a strong tobacco control program from 2003–2011, but drastically reduced funding in recent years. Six former legislators (three Democrats, three Republicans and three lobbyists for health organizations were interviewed about their attitudes towards tobacco use, support of state-funded programs, and reactions to two policy briefs. Five themes emerged: (1 high awareness of tobacco-related health concerns but limited awareness of program impacts and funding, (2 the primacy of economic concerns in making policy decisions, (3 ideological differences in views of the state’s role in tobacco control, (4 the impact of lobbyist and constituent in-person appeals, and (5 the utility of concise, contextualized data. These findings suggest that building relationships with policymakers to communicate ongoing program outcomes, emphasizing economic data, and developing a constituent advocacy group would be valuable to encourage continued support of state tobacco control programs.

  9. Empowerment Program for People With Prediabetes: A Randomized Controlled Trial.

    Science.gov (United States)

    Chen, Mei-Fang; Hung, Shu-Ling; Chen, Shu-Lin

    2017-04-01

    Practicing a health-promoting lifestyle is believed to be effective for delaying or preventing the onset of diabetes. However, although empowerment interventions have proven effective for encouraging the adoption of a health-promoting lifestyle in people with diabetes, these interventions are rarely promoted to people with prediabetes. The aims of this study were to develop an empowerment program for people with prediabetes and to examine its efficacy in terms of the adoption of a health-promoting lifestyle and improvements in blood sugar, body mass index, and self-efficacy. A randomized controlled trial was conducted between May and December 2013. A convenience sample of people with a fasting blood sugar level of 100-125 mg/dl during the previous 3 months was recruited from the health examination center of a hospital in Kaohsiung, Taiwan. Participants were assigned to either the experimental group or the control group using block randomization with a block size of 8. The experimental group (n = 38) participated in a 4-month empowerment program (the ABC empowerment program), which encouraged participants to practice a health-promoting lifestyle in three phases: awareness raising, behavior building, and results checking. The control group (n = 40) received routine clinical care. Statistical analyses included descriptive statistics, independent t test, paired t test, and generalized estimated equations. After controlling for the differences at baseline and considering the interaction between group and time from baseline to 1 week and 3 months after completing the intervention, the generalized estimating equation showed significantly larger improvements in a health-promoting lifestyle, blood sugar, and self-efficacy in the experimental group than in the control group (p empowerment program was shown to have short-term, positive effects on behavioral, physical, and psychosocial outcomes in a Taiwan population with prediabetes. The results of this study provide a useful

  10. Proposal of a control and quality guarantee program in radiotherapy and radiodiagnosis

    International Nuclear Information System (INIS)

    Tovar Rodas, J.A.

    1998-01-01

    In Guatemala, as regards guarantee and control of quality in the radiotherapy and radiodiagnostic areas, doesn't have until the moment, properly established, an action plan to carry out in systematic form, a program that it satisfies the design requirements and operation in an installation of this nature. However, it is well-known that the techniques that involve the employment of the ionizing radiations are powerful tools for their applications in industry, investigation and medicine; their use should be optimized and the associate risks should be evaluated to prevent them and to limit them. At the moment, the first actions of a guarantee program and quality control are carried out in the radiotherapy area for the intervention of the Secondary Laboratory of Dosimetric Calibration, but the quick growth of this area and the high number of radiodiagnosis facilities that work in the country, they outline the necessity to develop a methodology that solves the problem that is presented by the lack of controls of quality in these practices partly. The present work, presents in first plane the objectives, antecedents, forms of development, available resources and the necessities that are had in each area for the setting in march of the Quality Guarantee Program in Radiotherapy and of the Quality Control Program in Radiodiagnosis

  11. Journal of Agricultural Extension Vol. 17 (1) June, 2013 ISSN 1119 ...

    African Journals Online (AJOL)

    Onyii Ogbonna

    Journal of Agricultural Extension. Vol. ... Nigeria one of the largest importers of fish in the developing world, importing ... stratum formed the third stage. ..... Quarterly. 28 (3 & 4): 8-13. Binyotubo, T.E (2011). A guide to fishing gear technology.

  12. Egyptian Journal of Medical Human Genetics - Vol 11, No 1 (2010)

    African Journals Online (AJOL)

    Egyptian Journal of Medical Human Genetics - Vol 11, No 1 (2010) ... Gene polymorphisms of TNF-α and IL-10 related to rheumatic heart disease · EMAIL ... with familial Mediterranean fever · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  13. 59 East and Central African Journal of Pharmaceutical Sciences Vol ...

    African Journals Online (AJOL)

    pharm-chem

    East and Central African Journal of Pharmaceutical Sciences. Vol. 16 (2013). There is a misconception that traditional medicine is unique to developing countries of Africa, Asia and. South America. This is certainly not true. Traditional medicine, often referred to as "alternative medicine", is widely used in developed countries ...

  14. A neo-strategic planning approach to enhance local tobacco control programs.

    Science.gov (United States)

    Douglas, Malinda R; Carter, Sara Sally R; Wilson, Andrew P; Chan, Andie

    2015-01-01

    Research in tobacco control demonstrating best practices is widely disseminated; however, application at the local level is often difficult. Translating research into practice requires a concerted effort to develop an understanding of the evidence and how it can be applied within diverse contexts. A strategic planning infrastructure was developed to support the translation of evidence-based interventions into community practice. This paper highlights the strategic process of turning "know-what" into "know-how" to facilitate the strategic planning and implementation of tobacco control best practices at the local level. The purpose, people, process, and product strategies of knowledge management and translation provided a framework for the strategic planning infrastructure. The knowledge translation concepts of audience, motivations, and mechanisms were synergized in the neo-strategic planning component design. The participants were 20 community coalitions funded to implement local tobacco control programs. From 2004 to 2011, the strategic planners facilitated a cyclical process to translate research into practice using a trio of integrated tools, skill-building workshops on strategic planning, and grantee-driven technical assistance and consultation. In the short term, the usefulness of the strategic planning components to the programs was measured. The intermediate outcome was the successful movement of the community programs from the planning stage to the implementation stage. The achievement of community-level changes in planned tobacco control efforts was the overall outcome measure for the success of the local coalitions. Seventeen of 20 communities that began the planning process implemented strategic plans. All 17 of the programs implemented evidence-based practices, resulting in numerous tobacco-free policies, increased cessation, and increased support from the media and community. Bridging the gap between research and practice can enhance the practicality

  15. Implementation of a quality control program for a 6 MeV linear photon accelerator

    International Nuclear Information System (INIS)

    Berdaky, Mafalda F.; Caldas, Linda V.E.

    2001-01-01

    This paper describes the operational characteristics of the final process of implementation of a quality control program using routine mechanical and radiation tests. The quality control program was performed during 35 months and demonstrated the excellent stability of this accelerator. (author)

  16. Control of octopus arm extension by a peripheral motor program.

    Science.gov (United States)

    Sumbre, G; Gutfreund, Y; Fiorito, G; Flash, T; Hochner, B

    2001-09-07

    For goal-directed arm movements, the nervous system generates a sequence of motor commands that bring the arm toward the target. Control of the octopus arm is especially complex because the arm can be moved in any direction, with a virtually infinite number of degrees of freedom. Here we show that arm extensions can be evoked mechanically or electrically in arms whose connection with the brain has been severed. These extensions show kinematic features that are almost identical to normal behavior, suggesting that the basic motor program for voluntary movement is embedded within the neural circuitry of the arm itself. Such peripheral motor programs represent considerable simplification in the motor control of this highly redundant appendage.

  17. Bulletin of the Chemical Society of Ethiopia - Vol 23, No 1 (2009)

    African Journals Online (AJOL)

    Bulletin of the Chemical Society of Ethiopia - Vol 23, No 1 (2009) ... CHEMICAL REGENERATION OF GRANULAR ACTIVATED CARBON USED IN CITRIC ... FLUORESCENCE PROPERTIES OF 4-ACYL ISOCHROMAN-1,3-DIONES · EMAIL ...

  18. Journal of Agriculture and Social Research (JASR) - Vol 6, No 1 ...

    African Journals Online (AJOL)

    Journal of Agriculture and Social Research (JASR) - Vol 6, No 1 (2006) ... Econometric analysis of the effect of marketing costs on grain prices in Kaduna State of ... Impact of mass media on adoption of agricultural innovations in Kaduna State, ...

  19. Effectiveness of the home-based alcohol prevention program "In control: No alcohol!": study protocol of a randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Verdurmen Jacqueline EE

    2011-08-01

    Full Text Available Abstract Background In the Netherlands, children start to drink at an early age; of the Dutch 12-year olds, 40% reports lifetime alcohol use, while 9.7% reports last-month drinking. Starting to drink at an early age puts youth at risk of developing several alcohol-related problems later in life. Recently, a home-based prevention program called "In control: No alcohol!" was developed to delay the age of alcohol onset in children. The main aim of this project is to conduct a Randomized Controlled Trial (RCT to evaluate the effectiveness of the program. Methods/Design The prevention program will be tested with an RCT among mothers and their 6 grade primary school children (11-12 years old, randomly assigned to the prevention or control condition. The program consists of five printed magazines and an activity book designed to improve parental alcohol-specific socialization. Parent-child dyads in the control group receive a factsheet information brochure, which is the standard alcohol brochure of the Trimbos Institute (the Netherlands Institute for Mental Health and Addiction. Outcome measures are initiation of alcohol use (have been drinking at least one glass of alcohol, alcohol-specific parenting, susceptibility to drinking alcohol, alcohol expectancies, self-efficacy, and frequency and intensity of child alcohol use. Questionnaires will be administered online on secured Internet webpages, with personal login codes for both mothers and children. Mothers and children in both the experimental and control condition will be surveyed at baseline and after 6, 12, and 18 months (follow-ups. Discussion The present study protocol presents the design of an RCT evaluating the effectiveness of the home-based "In control: No alcohol!" program for 6 grade primary school children (11-12 years old. It is hypothesized that children in the prevention condition will be less likely to have their first glass of alcohol, compared to the control condition. When the

  20. Discrete Time McKean–Vlasov Control Problem: A Dynamic Programming Approach

    Energy Technology Data Exchange (ETDEWEB)

    Pham, Huyên, E-mail: pham@math.univ-paris-diderot.fr; Wei, Xiaoli, E-mail: tyswxl@gmail.com [Laboratoire de Probabilités et Modèles Aléatoires, CNRS, UMR 7599, Université Paris Diderot (France)

    2016-12-15

    We consider the stochastic optimal control problem of nonlinear mean-field systems in discrete time. We reformulate the problem into a deterministic control problem with marginal distribution as controlled state variable, and prove that dynamic programming principle holds in its general form. We apply our method for solving explicitly the mean-variance portfolio selection and the multivariate linear-quadratic McKean–Vlasov control problem.

  1. Discrete Time McKean–Vlasov Control Problem: A Dynamic Programming Approach

    International Nuclear Information System (INIS)

    Pham, Huyên; Wei, Xiaoli

    2016-01-01

    We consider the stochastic optimal control problem of nonlinear mean-field systems in discrete time. We reformulate the problem into a deterministic control problem with marginal distribution as controlled state variable, and prove that dynamic programming principle holds in its general form. We apply our method for solving explicitly the mean-variance portfolio selection and the multivariate linear-quadratic McKean–Vlasov control problem.

  2. Cost avoidance techniques through the Fernald controlled area trash segregation program and the RIMIA solid waste reduction program

    International Nuclear Information System (INIS)

    Menche, C.E.

    1997-01-01

    The Fernald Environmental Management Project is a Department of Energy owned facility that produced high quality uranium metals for military defense. The Fernald mission has changed from one of production to remediation. Remediation is intended to clean up legacy (primary) waste from past practices. Little opportunity is available to reduce the amount of primary waste. However, there is an opportunity to reduce secondary waste generation, primarily through segregation. Two programs which accomplish this are the Controlled Area Trash Segregation Program and the RIMIA Solid Waste Reduction Program. With these two programs now in place at the FEMP, it has been estimated that a 60% reduction has been achieved in unnecessary clean waste being disposed as Low Level Waste at the Nevada Test Site. The cost savings associated with these programs (currently 79,000 cubic feet, $428,000) could easily run into the millions of dollars based on the upcoming restoration activities to be undertaken. The segregation of non-radiological waste in the radiologically Controlled Area not only establishes a firm commitment to send only low-level radioactive waste to the Nevada Test Site, but also results in substantial cost avoidance

  3. Journal of Computer Science and Its Application - Vol 20, No 2 (2013)

    African Journals Online (AJOL)

    Journal of Computer Science and Its Application - Vol 20, No 2 (2013) ... Fuzzy analysis and adaptive anthropometry model for object identification in surveillance system ... Natural language processing techniques for automatic test questions ...

  4. The Atomic Energy Control Board's regulatory research and support program

    International Nuclear Information System (INIS)

    1988-04-01

    The purpose of the Regulatory Research and Support Program is to augment and extend the capability of the Atomic Energy Control Board's (AECB) regulatory program beyond the capability of in-house resources. The overall objective of the program is to produce pertinent and independent scientific and other knowledge and expertise that will assist the AECB in making correct, timely and credible decisions on regulating the development, application and use of atomic energy. The objectives are achieved through contracted research, development, studies, consultant and other kinds of projects administered by the Research and Radiation Protection Branch (RRB) of the AECB

  5. Structure and management of tuberculosis control programs in fragile states--Afghanistan, DR Congo, Haiti, Somalia.

    Science.gov (United States)

    Mauch, Verena; Weil, Diana; Munim, Aayid; Boillot, Francois; Coninx, Rudi; Huseynova, Sevil; Powell, Clydette; Seita, Akihiro; Wembanyama, Henriette; van den Hof, Susan

    2010-07-01

    Health care delivery is particularly problematic in fragile states often connected with increased incidence of communicable diseases, among them tuberculosis. This article draws upon experiences in tuberculosis control in four fragile states from which four lessons learned were derived. A structured inventory to extract common themes specific for TB control in fragile states was conducted among twelve providers of technical assistance who have worked in fragile states. The themes were applied to the TB control programs of Afghanistan, DR Congo, Haiti and Somalia during the years 2000-2006. Case notifications and treatment outcomes have increased in all four countries since 2003 (treatment success rates 81-90%). Access to care and case detection however have remained insufficient (case detection rates 39-62%); There are four lessons learned: 1. TB control programs can function in fragile states. 2. National program leadership and stewardship are essential for quality and sustained TB control. 3. Partnerships with non-governmental providers are vital for continuous service delivery; 4. TB control programs in fragile states require consistent donor support. Despite challenges in management, coordination, security, logistics and funding, TB control programs can function in fragile states, but face considerable problems in access to diagnosis and treatment and therefore case detection. Copyright (c) 2010 Elsevier Ireland Ltd. All rights reserved.

  6. Siim Nestor soovitab : Tallinn Doom Night vol.1. Odessa Pop / Siim Nestor

    Index Scriptorium Estoniae

    Nestor, Siim, 1974-

    2006-01-01

    Soome doom-metal ansambel Reverend Bizarre üritusel "Tallinn Doom Night vol.1" 8. dets. klubis Rockstar's. Indipoppi viljelev Rootsi duo My Darling Yoy! üritusel "Odessa Pop" 9. dets. Tallinnas klubis KuKu

  7. A Fully Automated Diabetes Prevention Program, Alive-PD: Program Design and Randomized Controlled Trial Protocol.

    Science.gov (United States)

    Block, Gladys; Azar, Kristen Mj; Block, Torin J; Romanelli, Robert J; Carpenter, Heather; Hopkins, Donald; Palaniappan, Latha; Block, Clifford H

    2015-01-21

    In the United States, 86 million adults have pre-diabetes. Evidence-based interventions that are both cost effective and widely scalable are needed to prevent diabetes. Our goal was to develop a fully automated diabetes prevention program and determine its effectiveness in a randomized controlled trial. Subjects with verified pre-diabetes were recruited to participate in a trial of the effectiveness of Alive-PD, a newly developed, 1-year, fully automated behavior change program delivered by email and Web. The program involves weekly tailored goal-setting, team-based and individual challenges, gamification, and other opportunities for interaction. An accompanying mobile phone app supports goal-setting and activity planning. For the trial, participants were randomized by computer algorithm to start the program immediately or after a 6-month delay. The primary outcome measures are change in HbA1c and fasting glucose from baseline to 6 months. The secondary outcome measures are change in HbA1c, glucose, lipids, body mass index (BMI), weight, waist circumference, and blood pressure at 3, 6, 9, and 12 months. Randomization and delivery of the intervention are independent of clinic staff, who are blinded to treatment assignment. Outcomes will be evaluated for the intention-to-treat and per-protocol populations. A total of 340 subjects with pre-diabetes were randomized to the intervention (n=164) or delayed-entry control group (n=176). Baseline characteristics were as follows: mean age 55 (SD 8.9); mean BMI 31.1 (SD 4.3); male 68.5%; mean fasting glucose 109.9 (SD 8.4) mg/dL; and mean HbA1c 5.6 (SD 0.3)%. Data collection and analysis are in progress. We hypothesize that participants in the intervention group will achieve statistically significant reductions in fasting glucose and HbA1c as compared to the control group at 6 months post baseline. The randomized trial will provide rigorous evidence regarding the efficacy of this Web- and Internet-based program in reducing or

  8. Development of Computer-Aided Learning Programs on Nuclear Nonproliferation and Control

    International Nuclear Information System (INIS)

    Kim, Hyun Chul

    2011-01-01

    The fulfillment of international norms for nuclear nonproliferation is indispensable to the promotion of nuclear energy. The education and training for personnel and mangers related to the nuclear material are one of crucial factors to avoid unintended non-compliance to international norms. Korea Institute of Nuclear Nonproliferation and Control (KINAC) has been providing education and training on nuclear control as its legal duty. One of the legally mandatory educations is 'nuclear control education' performed since 2006 for the observation of the international norms on nuclear nonproliferation and the spread of the nuclear control culture. The other is 'physical protection education' performed since 2010 for maintaining the national physical protection regime effectively and the spread of the nuclear security culture. The 2010 Nuclear Security Summit was held in Washington, DC to enhance international cooperation to prevent nuclear terrorism. During the Summit, the South Korea was chosen to host the second Nuclear Summit in 2012. South Korean President announced that South Korea would share its expertise and support the Summit's mission by setting up an international education and training center on nuclear security in 2014. KINAC is making a full effort to set up the center successfully. An important function of the center is education and training in the subjects of nuclear nonproliferation, nuclear safeguards, nuclear security, and nuclear export/import control. With increasing importance of education and training education on nuclear nonproliferation and control, KINAC has been developing computer-aided learning programs on nuclear nonproliferation and control to overcome the weaknesses in classroom educations. This paper shows two learning programs. One is an e-learning system on the nuclear nonproliferation and control and the other is a virtual reality program for training nuclear material accountancy inspection of light water reactor power plants

  9. Development of Computer-Aided Learning Programs on Nuclear Nonproliferation and Control

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyun Chul [Korea Institute of Nuclear Nonproliferation and Control, Daejeon (Korea, Republic of)

    2011-10-15

    The fulfillment of international norms for nuclear nonproliferation is indispensable to the promotion of nuclear energy. The education and training for personnel and mangers related to the nuclear material are one of crucial factors to avoid unintended non-compliance to international norms. Korea Institute of Nuclear Nonproliferation and Control (KINAC) has been providing education and training on nuclear control as its legal duty. One of the legally mandatory educations is 'nuclear control education' performed since 2006 for the observation of the international norms on nuclear nonproliferation and the spread of the nuclear control culture. The other is 'physical protection education' performed since 2010 for maintaining the national physical protection regime effectively and the spread of the nuclear security culture. The 2010 Nuclear Security Summit was held in Washington, DC to enhance international cooperation to prevent nuclear terrorism. During the Summit, the South Korea was chosen to host the second Nuclear Summit in 2012. South Korean President announced that South Korea would share its expertise and support the Summit's mission by setting up an international education and training center on nuclear security in 2014. KINAC is making a full effort to set up the center successfully. An important function of the center is education and training in the subjects of nuclear nonproliferation, nuclear safeguards, nuclear security, and nuclear export/import control. With increasing importance of education and training education on nuclear nonproliferation and control, KINAC has been developing computer-aided learning programs on nuclear nonproliferation and control to overcome the weaknesses in classroom educations. This paper shows two learning programs. One is an e-learning system on the nuclear nonproliferation and control and the other is a virtual reality program for training nuclear material accountancy inspection of light water

  10. A Community-Directed Integrated Strongyloides Control Program in Queensland, Australia

    Directory of Open Access Journals (Sweden)

    Adrian Miller

    2018-05-01

    Full Text Available This paper describes two phases of a community-directed intervention to address strongyloidiasis in the remote Aboriginal community of Woorabinda in central Queensland, Australia. The first phase provides the narrative of a community-driven ‘treat-and-test’ mass drug administration (MDA intervention that was co-designed by the Community Health Service and the community. The second phase is a description of the re-engagement of the community in order to disseminate the key factors for success in the previous MDA for Strongyloides stercoralis, as this information was not shared or captured in the first phase. During the first phase in 2004, there was a high prevalence of strongyloidiasis (12% faecal examination, 30% serology; n = 944 community members tested that resulted in increased morbidity and at least one death in the community. Between 2004–2005, the community worked in partnership with the Community Health Service to implement a S. stercoralis control program, where all of the residents were treated with oral ivermectin, and repeat doses were given for those with positive S. stercoralis serology. The community also developed their own health promotion campaign using locally-made resources targeting relevant environmental health problems and concerns. Ninety-two percent of the community residents participated in the program, and the prevalence of strongyloidiasis at the time of the ‘treat-and-test’ intervention was 16.6% [95% confidence interval 14.2–19.3]. The cure rate after two doses of ivermectin was 79.8%, based on pre-serology and post-serology tests. The purpose of this paper is to highlight the importance of local Aboriginal leadership and governance and a high level of community involvement in this successful mass drug administration program to address S. stercoralis. The commitment required of these leaders was demanding, and involved intense work over a period of several months. Apart from controlling strongyloidiasis

  11. ASJP_vol11_Special_Issue_2013 ODD SIZE NEW.indd

    African Journals Online (AJOL)

    opperwjj

    African Safety Promotion Journal, Vol. 11, No. ... ABSTRACT. This article takes as its starting point that crime fiction is a public and political response to ... Finally, Hart, Orford's hard-boiled female detective figure, is assessed to ..... Four of Orford's Clare Hart novels are situated in the Cape where Anene Booysen died. In.

  12. Adipocyte lipid synthesis coupled to neuronal control of thermogenic programming

    Directory of Open Access Journals (Sweden)

    Adilson Guilherme

    2017-08-01

    Conclusions: These results demonstrate that downregulation of fatty acid synthesis via FASN depletion in white adipocytes of mature mice can stimulate neuronal signaling to control thermogenic programming in iWAT.

  13. Self-control program in the treatment of obesity.

    Science.gov (United States)

    Rosen, L W

    1981-06-01

    In a pilot study utilizing self-control techniques for the purpose of modifying the cue-reactive eating habits of obese patients, three subjects maintained a continuous weight loss throughout the first year of treatment. Techniques included goal setting, self-monitoring, brief delay and self-confrontation prior to eating unauthorized food and direct observation of oneself in a mirror when eating unauthorized food. All patients are expected to remain in treatment for the foreseeable future with no termination of the program despite apparent success with regard to control of their feeding disturbance. The rationale for this approach is discussed.

  14. Active vibration control testing of the SPICES program: final demonstration article

    Science.gov (United States)

    Dunne, James P.; Jacobs, Jack H.

    1996-05-01

    The Synthesis and Processing of Intelligent Cost Effective Structures (SPICES) Program is a partnership program sponsored by the Advanced Research Projects Agency. The mission of the program is to develop cost effective material processing and synthesis technologies to enable new products employing active vibration suppression and control devices to be brought to market. The two year program came to fruition in 1995 through the fabrication of the final smart components and testing of an active plate combined with two trapezoidal rails, forming an active mount. Testing of the SPICES combined active mount took place at McDonnell Douglas facilities in St. Louis, MO, in October-December 1995. Approximately 15 dB reduction in overall response of a motor mounted on the active structure was achieved. Further details and results of the SPICES combined active mount demonstration testing are outlined. Results of numerous damping and control strategies that were developed and employed in the testing are presented, as well as aspects of the design and fabrication of the SPICES active mount components.

  15. Apollo experience report: Guidance and control systems. Engineering simulation program

    Science.gov (United States)

    Gilbert, D. W.

    1973-01-01

    The Apollo Program experience from early 1962 to July 1969 with respect to the engineering-simulation support and the problems encountered is summarized in this report. Engineering simulation in support of the Apollo guidance and control system is discussed in terms of design analysis and verification, certification of hardware in closed-loop operation, verification of hardware/software compatibility, and verification of both software and procedures for each mission. The magnitude, time, and cost of the engineering simulations are described with respect to hardware availability, NASA and contractor facilities (for verification of the command module, the lunar module, and the primary guidance, navigation, and control system), and scheduling and planning considerations. Recommendations are made regarding implementation of similar, large-scale simulations for future programs.

  16. Qualitative Assessment of Challenges in Tuberculosis Control in West Gojjam Zone, Northwest Ethiopia: Health Workers’ and Tuberculosis Control Program Coordinators’ Perspectives

    Directory of Open Access Journals (Sweden)

    Senedu B. Gebreegziabher

    2016-01-01

    Full Text Available Background. Weak health systems pose many barriers to effective tuberculosis (TB control. This study aimed at exploring health worker’s and TB control program coordinator’s perspectives on health systems challenges facing TB control in West Gojjam Zone, Amhara Region, Ethiopia. Methods. This was a qualitative descriptive study. Eight in-depth interviews with TB control program coordinators and two focus group discussions among 16 health workers were conducted. Purposive sampling was used to recruit study participants. Thematic analysis was used to identify and analyse main themes. Results. We found that intermittent interruptions of laboratory reagents and anti-TB drugs supplies, absence of trained and motivated health workers, poor TB data documentation, lack of adherence to TB treatment guideline, and lack of access to TB diagnostic tools at peripheral health institutions were challenges facing the TB control program performance in the study zone. Conclusions. Ensuring uninterrupted supply of anti-TB drugs and laboratory reagents to all health institutions is essential. Continuous refresher training of health workers on standard TB care and data handling and developing and implementing a sound retention strategy to attract and motivate health professionals to work in rural areas are necessary interventions to improve the TB control program performance in the study zone.

  17. Fetal health locus of control: Scale properties and applications in preconception health programs.

    Science.gov (United States)

    Soliday, Elizabeth; Strahm, Anna; Mammenga, Stefani

    2016-04-01

    Preconception health programs have resulted in improved health behaviors among participants and have shown promise in reducing adverse birth outcomes. However, the role of health beliefs in preconception health program outcomes has been overlooked but warrants attention due to reported positive associations between women's views of control over fetal health and health behavior in pregnancy. Towards an ultimate aim of improving preconception health program reach and effectiveness, we examined properties of a fetal health locus of control (FHLC; Labs & Wurtele, 1986) measure in nulliparous, childbearing aged university women and men. Students (n=1467) completed an online survey that included the FHLC subscales maternal, powerful others', and chance control over fetal health. Factor analyses and correlations with related scales supported the soundness of FHLC constructs in both women and men. All participants rated maternal control in fetal health nearly twice as highly as powerful others' and chance. We therefore recommend that FHLC be integrated into preconception health program evaluation as personal agency in fetal health likely has an important role in women's and men's preconception health behavior and health behavior change. Copyright © 2015 Elsevier Ltd. All rights reserved.

  18. Discrete Globalised Dual Heuristic Dynamic Programming in Control of the Two-Wheeled Mobile Robot

    Directory of Open Access Journals (Sweden)

    Marcin Szuster

    2014-01-01

    Full Text Available Network-based control systems have been emerging technologies in the control of nonlinear systems over the past few years. This paper focuses on the implementation of the approximate dynamic programming algorithm in the network-based tracking control system of the two-wheeled mobile robot, Pioneer 2-DX. The proposed discrete tracking control system consists of the globalised dual heuristic dynamic programming algorithm, the PD controller, the supervisory term, and an additional control signal. The structure of the supervisory term derives from the stability analysis realised using the Lyapunov stability theorem. The globalised dual heuristic dynamic programming algorithm consists of two structures: the actor and the critic, realised in a form of neural networks. The actor generates the suboptimal control law, while the critic evaluates the realised control strategy by approximation of value function from the Bellman’s equation. The presented discrete tracking control system works online, the neural networks’ weights adaptation process is realised in every iteration step, and the neural networks preliminary learning procedure is not required. The performance of the proposed control system was verified by a series of computer simulations and experiments realised using the wheeled mobile robot Pioneer 2-DX.

  19. 76 FR 68525 - Medicare Program; Home Health Prospective Payment System Rate Update for Calendar Year 2012

    Science.gov (United States)

    2011-11-04

    ... Prospective Payment System Rate Update for Calendar Year 2012; Final Rule #0;#0;Federal Register / Vol. 76, No... 0938-AQ30 Medicare Program; Home Health Prospective Payment System Rate Update for Calendar Year 2012... sets forth updates to the home health prospective payment system (HH PPS) rates, including: the...

  20. Chemical inventory control program for mixed and hazardous waste facilities at SRS

    International Nuclear Information System (INIS)

    Ades, M.J.; Vincent, A.M. III.

    1997-01-01

    Mixed Waste (MW) and Hazardous Waste (HW) are being stored at the Savannah River Site (SRS) pending onsite and/or offsite treatment and disposal. The inventory control for these wastes has recently been brought under Technical Safety Requirements (TSR) in accordance with DOE Order 5480.22. With the TSRs was the question of the degree of rigor with which the inventory is to be tracked, considering that the variety of chemicals present, or that could be present, numbers in the hundreds. This paper describes the graded approach program to track Solid Waste (SW) inventories relative to TSRs. The approach uses a ratio of the maximum anticipated chemical inventory to the permissible inventory in accordance with Emergency Response Planning Guideline (ERPG) limits for on- and off-site receptors. A specific threshold ratio can then be determined. The chemicals above this threshold ratio are to be included in the chemical inventory control program. The chemicals that fall below the threshold ratio are managed in accordance with existing practice per State and RCRA hazardous materials requirements. Additionally, the facilities are managed in accordance with process safety management principles, specifically using process hazards analyses, which provides safety assurance for even the small quantities that may be excluded from the formal inventory control program. The method yields a practical approach to chemical inventory control, while maintaining appropriate chemical safety margins. The resulting number of specific chemicals that require inclusion in a rigorous inventory control program is greatly reduced by about 80%, thereby resulting in significant reduction in chemical data management while preserving appropriate safety margins

  1. Control and synchronisation of a novel seven-dimensional ...

    Indian Academy of Sciences (India)

    METIN VARAN

    2018-03-16

    Mar 16, 2018 ... This paper is organised as follows: In §2, seven- ..... Intelligent Control and Automation (Hangzhou, 2004). Vol. ... [42] M A Franchek, M W Ryan and R J Bernhard, J. Sound ... Chaotic systems, artificial neural networks, random.

  2. Análisis de los compuestos volátiles de la ciruela amarilla (Prunus domestica L. ssp. domestica

    Directory of Open Access Journals (Sweden)

    Yineth Ruiz

    2011-01-01

    Full Text Available El aroma de las frutas se debe a los constituyentes volátiles presentes que, aunque se encuentran en muy bajas concentraciones, contribuyen al aroma global en grados muy diversos. Se hace necesario usar técnicas de aislamiento y concentración que garanticen el análisis de una composición química semejante a la de la fruta. Este trabajo tuvo como objetivo el análisis de los compuestos volátiles de la ciruela amarilla (Prunus domestica L. ssp. domestica por el método de evaporación del aroma asistida por solvente (SAFE. Este método utiliza un equipo de destilación conectado a una bomba de alto vacío que ofrece la posibilidad de aislar rápidamente compuestos volátiles sin daño térmico en diferentes matrices alimentarias. La separación e identificación de los compuestos volátiles se realizó por cromatografía de gases-espectrometría de masas (GC-MS. Se identificaron 47 compuestos (6,55 mg/kg de pulpa de fruta, entre ellos 14 alcoholes, 8 aldehídos, 7 ésteres, 5 cetonas, 4 ácidos carboxílicos, 4 hidrocarburos aromáticos, 3 lactonas, un compuesto azufrado y una hidroxicetona; 16 de ellos se informan por primera vez. El acetato de etilo (2,88 mg/kg, etanol (1 mg/kg y ácido octanoico (0,78 mg/kg fueron los constituyentes volátiles mayoritarios de esta variedad de ciruela.

  3. Análisis de los compuestos volátiles de la ciruela amarilla (Prunus domestica L. ssp. domestica

    Directory of Open Access Journals (Sweden)

    Yineth Ruiz

    2011-06-01

    Full Text Available El aroma de las frutas se debe a los constituyentes volátiles presentes que, aunque se encuentran en muy bajas concentraciones, contribuyen al aroma global en grados muy diversos. Se hace necesario usar técnicas de aislamiento y concentración que garanticen el análisis de una composición química semejante a la de la fruta. Este trabajo tuvo como objetivo el análisis de los compuestos volátiles de la ciruela amarilla (Prunus domestica L. ssp.domestica por el método de evaporación del aroma asistida por solvente (SAFE. Este método utiliza un equipo de destilación conectado a una bomba de alto vacío que ofrece la posibilidad de aislar rápidamente compuestos volátiles sin daño térmico en diferentes matrices alimentarias. La separación e identificación de los compuestos volátiles se realizó por cromatografía de gases-espectrometría de masas (GC-MS. Se identificaron 47 compuestos (6,55 mg/kg de pulpa de fruta, entre ellos 14 alcoholes, 8 aldehídos, 7 ésteres, 5 cetonas, 4 ácidos carboxílicos, 4 hidrocarburos aromáticos, 3 lactonas, un compuesto azufrado y una hidroxicetona; 16 de ellos se informan por primera vez. El acetato de etilo (2,88 mg/kg, etanol (1 mg/kg y ácido octanoico (0,78 mg/kg fueron los constituyentes volátiles mayoritarios de esta variedad de ciruela.

  4. Journal of Agriculture, Forestry and the Social Sciences - Vol 5, No 2 ...

    African Journals Online (AJOL)

    Journal of Agriculture, Forestry and the Social Sciences - Vol 5, No 2 (2007) ... Marketing Of Bushmeat In Peri-Urban Areas Of Ibadan Metropolis Of Oyo State, ... Sport Fisheries Potentials Of Agbokim Waterfalls, Cross River State, Nigeria ...

  5. Bulletin of the Chemical Society of Ethiopia - Vol 3, No 2 (1989)

    African Journals Online (AJOL)

    Bulletin of the Chemical Society of Ethiopia - Vol 3, No 2 (1989) ... Synthesis and characterization of gold (III) halide complexes of some pyridine ... Molluscicidal activities of some alkaloids · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  6. Bulletin of the Chemical Society of Ethiopia - Vol 27, No 3 (2013)

    African Journals Online (AJOL)

    Bulletin of the Chemical Society of Ethiopia - Vol 27, No 3 (2013) ... of the psychoactive phenylpropylamino alkaloids of khat (Catha edulis Forsk) chewing ... Synthesis and characterization of CdTe quantum dots by one-step method · EMAIL ...

  7. Medical Marijuana programs: implications for cannabis control policy--observations from Canada.

    Science.gov (United States)

    Fischer, Benedikt; Kuganesan, Sharan; Room, Robin

    2015-01-01

    While prohibition has been the dominant regime of cannabis control in most countries for decades, an increasing number of countries have been implementing cannabis control reforms recently, including decriminalization or even legalization frameworks. Canada has held out from this trend, although it has among the highest cannabis use rates in the world. Cannabis use is universally criminalized, and the current (conservative) federal government has vowed not to implement any softening reforms to cannabis control. As a result of several higher court decisions, the then federal government was forced to implement a 'medical marijuana access regulations' program in 2001 to allow severely ill patients therapeutic use and access to therapeutic cannabis while shielding them from prosecution. The program's regulations and approval processes were complex and subject to extensive criticism; initial uptake was low and most medical marijuana users continued their use and supply outside the program's auspices. This year, the government introduced new 'marijuana for medical purposes regulations', which allow physicians to 'authorize' medical marijuana use for virtually any health condition for which this is considered beneficial; supply is facilitated by licensed commercial producers. It is expected that some 500,000 users, and dozens of commercial producers will soon be approved under the program, arguably constituting - as with medical marijuana schemes elsewhere, e.g. in California--de facto 'legalization'. We discuss the question whether the evolving scope and realities of 'medical cannabis' provisions in Canada offer a 'sneaky side door' or a 'better third way' to cannabis control reform, and what the potential wider implications are of these developments. Copyright © 2014. Published by Elsevier B.V.

  8. Teaching Game Programming using Video Tutorials

    DEFF Research Database (Denmark)

    Majgaard, Gunver

    . & Squire K. (2004). Design-Based Research: Putting a Stake in the Ground. Journal of Learning Sciences Vol. 13-1. Lave, J., & Wenger, E. (1991). Situated Learning: Legitimate Peripheral Participation, Cambridge: Cambridge Univ. Majgaard, G. (2014). Teaching Design of Emerging Embodied Technologies......Background. What are the learning potentials of using online video tutorials as educational tools in game programming of Mixed Reality? The paper reports on the first experiences of teaching third semester engineering students design of Mixed Reality using online step-by-step programming video...... production makes video tutorials a promising alternative to paper tutorials. Software and game engine companies such as Unity has already switched to video and other online materials as the primary medium for their tutorials. It is often hard to find up to date thoroughly worked through textbooks on new...

  9. Heavy-section steel technology program. Semiannual progress report, April--September 1995 Vol. 12, No. 2

    Energy Technology Data Exchange (ETDEWEB)

    Pennell, W.E.

    1997-01-01

    The Heavy-Section Steel Technology (HSST) Program is conducted for the Nuclear Regulatory Commission by Oak Ridge National Laboratory (ORNL). The program focus is on the development and validation of technology for the assessment of fracture-prevention margins in commercial nuclear reactor pressure vessels. The HSST Program is organized in seven tasks: (1) program management, (2) constraint effects analytical development and validation, (3) evaluation of cladding effects, (4) ductile-to-cleavage fracture-mode conversion, (5) fracture analysis methods development and applications, (6) material property data and test methods, and (7) integration of results. The program tasks have been structured to place emphasis on the resolution of fracture issues with near-term licensing significance. Resources to execute the research tasks are drawn from ORNL with subcontract support from universities and other research laboratories. Close contact is maintained with the sister Heavy-Section Steel Irradiation Program at ORNL and with related research programs both in the United States and abroad. This report provides an overview of principal developments in each of the seven program tasks from April 1995 to September 1995.

  10. Dairy farmers can change: results of a five-year national mastitis control program in The Netherlands

    NARCIS (Netherlands)

    Jansen, J.; Schaik, van G.; Renes, R.J.; Lam, T.J.G.M.

    2010-01-01

    Over the years, much effort has been put into mastitis control programs. To further improve such programs, we need to understand farmers’ knowledge, attitude and behavior regarding udder health, and the way this can be influenced by mastitis control programs. This study aimed to explore the effect

  11. Tanzania Dental Journal Vol. 14 No. 1, May 2007 In vitro efficacy of ...

    African Journals Online (AJOL)

    user

    2007-05-30

    May 30, 2007 ... Tanzania Dental Journal Vol. 14 No. ... 2 Centre for Stomatological Research, School of Dentistry, University of Pretoria, Pretoria, South Africa. ..... Interestingly, clinical trials .... International Organization for Standardization,.

  12. Quantitative Robust Control Engineering: Theory and Applications

    Science.gov (United States)

    2006-09-01

    30]. Gutman, PO., Baril , C. Neuman, L. (1994), An algorithm for computing value sets of uncertain transfer functions in factored real form...linear compensation design for saturating unstable uncertain plants. Int. J. Control, Vol. 44, pp. 1137-1146. [90]. Oldak S., Baril C. and Gutman

  13. Drag reduction of a car model by linear genetic programming control

    Science.gov (United States)

    Li, Ruiying; Noack, Bernd R.; Cordier, Laurent; Borée, Jacques; Harambat, Fabien

    2017-08-01

    We investigate open- and closed-loop active control for aerodynamic drag reduction of a car model. Turbulent flow around a blunt-edged Ahmed body is examined at ReH≈ 3× 105 based on body height. The actuation is performed with pulsed jets at all trailing edges (multiple inputs) combined with a Coanda deflection surface. The flow is monitored with 16 pressure sensors distributed at the rear side (multiple outputs). We apply a recently developed model-free control strategy building on genetic programming in Dracopoulos and Kent (Neural Comput Appl 6:214-228, 1997) and Gautier et al. (J Fluid Mech 770:424-441, 2015). The optimized control laws comprise periodic forcing, multi-frequency forcing and sensor-based feedback including also time-history information feedback and combinations thereof. Key enabler is linear genetic programming (LGP) as powerful regression technique for optimizing the multiple-input multiple-output control laws. The proposed LGP control can select the best open- or closed-loop control in an unsupervised manner. Approximately 33% base pressure recovery associated with 22% drag reduction is achieved in all considered classes of control laws. Intriguingly, the feedback actuation emulates periodic high-frequency forcing. In addition, the control identified automatically the only sensor which listens to high-frequency flow components with good signal to noise ratio. Our control strategy is, in principle, applicable to all multiple actuators and sensors experiments.

  14. Estudo comparativo dos óleos voláteis de algumas espécies de Piperaceae

    Directory of Open Access Journals (Sweden)

    J.M.O. Mesquita

    Full Text Available O presente trabalho teve por objetivo a análise comparativa dos óleos voláteis de espécies da família Piperaceae. As espécies estudadas foram as seguintes: Piper aduncum, P. amalago, P. arboreum, P. cernuum, P. hispidum, P. regnelii, P. submarginalum, P. vicosanum e Pothomorphe umbellata. A análise dos óleos voláteis foi efetuada pela combinação de técnicas de Cromatografia de Fase Gasosa (CG e de Cromatografia de Fase Gasosa acoplada a Espectrometria de Massa (CG/EM. A porcentagem de identificação dos constituintes nas análises dos óleos voláteis de Piper aduncum, P. amalago, P. vicosanum, P. submarginalum e Pothomorphe umbellata, atingiu valores superiores a 80%. Houve predominância de compostos de natureza sesquiterpênica nas composições químicas das espécies analisadas, com exceção de P. hispidum, P. submarginalum e P. vicosanum onde a predominância na composição foi de monoterpenos. Pelos dados apresentados observou-se que, dentre os compostos majoritários, os mais freqüentes, nas 9 espécies estudadas, foram beta-pineno (9/9 e espatulenol (9/9, seguidos por E-cariofileno (8/9, óxido de cariofileno (8/9, germacreno D (7/9, alfa-pineno (7/9 e limoneno (6/9. Pela primeira vez se relata a composição dos óleos voláteis de P. submarginalum e P vicosanum.

  15. Journal of Medicine and Biomedical Research - Vol 14, No 1 (2015)

    African Journals Online (AJOL)

    Journal of Medicine and Biomedical Research - Vol 14, No 1 (2015) ... Histopathological effects of oral and subcutaneous administration of Roselle Calyx ... Ameliorative effect of Vitamin C on lead induced hepatotoxicty in rats · EMAIL ... Effect of Hibiscus sabdariffa calyx extract on stressed rabbit plasma cholesterol status ...

  16. Design of a PLC control program for a batch plant : VHS case study 1

    NARCIS (Netherlands)

    Mader, A.H.; Brinksma, E.; Wupper, H.; Bauer, N.

    2001-01-01

    This article reports on the systematic design and validation of a PLC control program for the batch plant that has been selected as a case study for the EC project on Verification of Hybrid Systems (VHS). We show how a correct design of the control program can be obtained in an incremental manner

  17. Design of a PLC Control Program for a Batch Plant - VHS Case Study 1

    NARCIS (Netherlands)

    Mader, Angelika H.; Brinksma, Hendrik; Wupper, H.; Bauer, N.

    2001-01-01

    This article reports on the systematic design and validation of a PLC control program for the batch plant that has been selected as a case study for the EC project on Verification of Hybrid Systems (VHS). We show how a correct design of the control program can be obtained in an incremental manner

  18. Control programs of multichannel pulse height analyzer with CAMAC system using FACOM U-200 mini-computer

    International Nuclear Information System (INIS)

    Yamagishi, Kojiro

    1978-02-01

    The 4096 channel Pulse Height Analyzer (PHA) assembled with CAMAC plug-in units has been developed in JAERI. The PHA consists of ADC unit, CRT-display unit, and CAMAC plug-in units, which are memory-controller, MCA-timer, 4K words RAM memory and CRT-driver. The system is on-line connected to FACOM U-200 Mini-Computer through CAMAC interface unit Crate-controller. The softwares for on-line data acquisition of the system have been developed. These are four utility programs written in FORTRAN and two program packages written in assembler language FASP which are CAMAC Program Package and Basic Input/Output Program Package. CAMAC Program Package has 18 subroutine programs for control of CAMAC plug-in units from FACOM U-200 Mini-Computer; and Basic Input/Output Program Package has 26 subroutine programs to input/output data to/from a typewriter, keyboard, cassette magnetic tape and open reel magnetic tape. These subroutine programs are all FORTRAN callable. The PHA with CAMAC system is first outlined, and then usage is described in detail of four utility programs, CAMAC Program Package and Basic Input/Output Program Package. (auth.)

  19. Supersymmetric mechanics. Vol. 2. The attractor mechanism and space time singularities

    International Nuclear Information System (INIS)

    Bellucci, S.; Marrani, A.; Ferrara, S.

    2006-01-01

    This is the second volume in a series of books on the general theme of Supersymmetric Mechanics; the series is based on lectures and discussions held in 2005 and 2006 at the INFN-Laboratori Nazionali di Frascati. The first volume appears as Lect. Notes Physics, Vol. 698 ''Supersymmetric Mechanics, Vol.1: Supersymmetry, Noncommutativity and Matrix Models'' (2006) ISBN: 3-540-33313-4. The present extensive lecture supplies a pedagogical introduction, at the non-expert level, to the attractor mechanism in space-time singularities. In such a framework, supersymmetry seems to be related to dynamical systems with fixed points, describing the equilibrium state and the stability features of the thermodynamics of black holes. After a qualitative overview, explicit examples realizing the attractor mechanism are treated at some length; they include relevant cases of asymptotically flat, maximal and non-maximal, extended supergravities in 4 and 5 dimensions. A number of recent advances along various directions of research on the attractor mechanism are also given. (orig.)

  20. A measurement control program for plutonium isotopic gamma-ray systems at the Rocky Flats Plant

    International Nuclear Information System (INIS)

    Fleissner, J.G.

    1986-01-01

    A sound measurement control (MC) program should be an integral part of every nondestructive assay measurement system used for the assay of special nuclear materials. This paper describes a measurement control program for plutonium isotopic composition measurements, using high-resolution gamma-ray spectroscopy, that has been implemented in the Analytical Laboratories and the Chemistry Standards Laboratory at the Rocky Flats Plant. This MC program emphasizes the standardization of data collection procedures along with the implementation of internal and external measurement control checks to provide the requisite measurement quality assurance

  1. Medicaid/CHIP Program; Medicaid Program and Children's Health Insurance Program (CHIP); Changes to the Medicaid Eligibility Quality Control and Payment Error Rate Measurement Programs in Response to the Affordable Care Act. Final rule.

    Science.gov (United States)

    2017-07-05

    This final rule updates the Medicaid Eligibility Quality Control (MEQC) and Payment Error Rate Measurement (PERM) programs based on the changes to Medicaid and the Children's Health Insurance Program (CHIP) eligibility under the Patient Protection and Affordable Care Act. This rule also implements various other improvements to the PERM program.

  2. Optimal Attitude Control of Agile Spacecraft Using Combined Reaction Wheel and Control Moment Gyroscope Arrays

    Science.gov (United States)

    2015-12-01

    communications between the MicroAuto Box and the ground station computer [58]. SimSat users design experiments in the MATLAB® Simulink environment and use an...Guidance, Control, and Dynamics, vol. 35, no. 4, pp. 1094–1103, 2012. [44] Z. Sun, L. Zhang, G. Jin, and X. Yang, “Analysis of inertia dyadic uncertainty

  3. The inception and evolution of a unique masters program in cancer biology, prevention and control.

    Science.gov (United States)

    Cousin, Carolyn; Blancato, Jan

    2010-09-01

    The University of the District of Columbia (UDC) and the Lombardi Comprehensive Cancer Center (LCCC), Georgetown University Medical Center established a Masters Degree Program in Cancer Biology, Prevention and Control at UDC that is jointly administered and taught by UDC and LCCC faculty. The goal of the Masters Degree Program is to educate students as master-level cancer professionals capable of conducting research and service in cancer biology, prevention, and control or to further advance the education of students to pursue doctoral studies. The Program's unique nature is reflected in its philosophy "the best cancer prevention and control researchers are those with a sound understanding of cancer biology". This program is a full-time, 2-year, 36-credit degree in which students take half of their coursework at UDC and half of their coursework at LCCC. During the second year, students are required to conduct research either at LCCC or UDC. Unlike most cancer biology programs, this unique Program emphasizes both cancer biology and cancer outreach training.

  4. Post-accident hydrogen control in GKT-containment

    International Nuclear Information System (INIS)

    Komurka, M.

    1983-06-01

    The maximum possible temperature and pressure rise is analysed by assuming hydrogen deflagration with no heat loss to the vessel walls for hydrogen concentrations up to 10 Vol%. Alternative hydrogen control system to inerting, air dilution and recombiners based on controlled venting by passing the vented gas through the delay line of the gas treatment system is recommended. The combination of hydrogen control with control of noble gas radioactivity is though to have a positive effect on safety. (Author) [de

  5. A computer program for controlling a university radioactive material inventory: From confusion to computer to control

    International Nuclear Information System (INIS)

    Robb, D.B.; Riches, C.G.; O'Brian, M.J.; Riordan, F.J.

    1984-01-01

    The University of Washington is a large user of radioactive material. Over 250 authorized programs are working in over 600 labs with nearly 3500 orders of radioactive material per year. The state license sets limits on the total amount of material on campus. There are also limits on sewer disposal. To meet these needs it is necessary to know the amount of material on campus at any time. A computer program was developed which covered many aspects of the radiation safety record needs including inventory control. Inventory is now managed by tracking each order from purchase to disposal. A screen menu as part of the interactive program allows immediate and detailed information about the inventory at time of purchase approval and delivery. Because of this system our knowledge and control of radionuclide work on campus has increased dramatically. A description of how this system is used during ordering, delivery and disposal will be given. Details on the methods to check limits are included along with a summary of the reports made possible by the current data files

  6. Statistical Process Control in the Practice of Program Evaluation.

    Science.gov (United States)

    Posavac, Emil J.

    1995-01-01

    A technique developed to monitor the quality of manufactured products, statistical process control (SPC), incorporates several features that may prove attractive to evaluators. This paper reviews the history of SPC, suggests how the approach can enrich program evaluation, and illustrates its use in a hospital-based example. (SLD)

  7. Improving bovine udder health: A national mastitis control program in the Netherlands

    NARCIS (Netherlands)

    Lam, T.J.G.M.; Borne, van den B.H.P.; Jansen, J.; Huijps, K.; Veersen, J.C.L.; Schaick, van G.; Hogeveen, H.

    2013-01-01

    Because of increasing bulk milk somatic cell counts and continuous clinical mastitis problems in a substantial number of herds, a national mastitis control program was started in 2005 to improve udder health in the Netherlands. The program started with founding the Dutch Udder Health Centre (UGCN),

  8. Lawrence Livermore Laboratory's beryllium control program for high-explosive test firing bunkers and tables

    International Nuclear Information System (INIS)

    Johnson, J.S.

    1980-01-01

    This report on the control program to minimize beryllium levels in Laboratory workplaces includes an outline of beryllium surface, soil, and air levels and an 11-y summary of sampling results from two high-use, high-explosive test firing bunkers. These sampling data and other studies demonstrate that the beryllium control program is functioning effectively

  9. EJOTMAS: Ekpoma Journal of Theatre and Media Arts - Vol 4, No 1 ...

    African Journals Online (AJOL)

    EJOTMAS: Ekpoma Journal of Theatre and Media Arts - Vol 4, No 1-2 (2013) ... Dance for children: a functional education for national growth · EMAIL FREE FULL ... From 'folkism' to performance: a new scenic strategy for audience integration ...

  10. An Electronic Workshop on the Performance Seeking Control and Propulsion Controlled Aircraft Results of the F-15 Highly Integrated Digital Electronic Control Flight Research Program

    Science.gov (United States)

    Powers, Sheryll Goecke (Compiler)

    1995-01-01

    Flight research for the F-15 HIDEC (Highly Integrated Digital Electronic Control) program was completed at NASA Dryden Flight Research Center in the fall of 1993. The flight research conducted during the last two years of the HIDEC program included two principal experiments: (1) performance seeking control (PSC), an adaptive, real-time, on-board optimization of engine, inlet, and horizontal tail position on the F-15; and (2) propulsion controlled aircraft (PCA), an augmented flight control system developed for landings as well as up-and-away flight that used only engine thrust (flight controls locked) for flight control. In September 1994, the background details and results of the PSC and PCA experiments were presented in an electronic workshop, accessible through the Dryden World Wide Web (http://www.dfrc.nasa.gov/dryden.html) and as a compact disk.

  11. EJOTMAS: Ekpoma Journal of Theatre and Media Arts - Vol 3, No 1 ...

    African Journals Online (AJOL)

    EJOTMAS: Ekpoma Journal of Theatre and Media Arts - Vol 3, No 1-2 (2010) ... The African composer as a social critic · EMAIL FREE FULL TEXT EMAIL FREE ... Potentials of the television in reinventing the Nigerian tourism industry · EMAIL ...

  12. Lawrence Livermore Laboratory's beryllium control program for high-explosive test firing bunkers and tables

    International Nuclear Information System (INIS)

    Johnson, J.S.

    1978-01-01

    This detailed report on Lawrence Livermore Laboratory's control program to minimize beryllium levels in Laboratory workplaces includes an outline of beryllium surface, soil, and air levels and an 11-y summary of sampling results from two high-use, high-explosive test firing bunkers. These sampling data and other studies demonstrate that the beryllium control program is funcioning effectively

  13. [Analysis of the results of the SEIMC External Quality Control Program. Year 2012].

    Science.gov (United States)

    de Gopegui Bordes, Enrique Ruiz; Guna Serrano, M del Remedio; Orta Mira, Nieves; Ovies, María Rosario; Poveda, Marta; Gimeno Cardona, Concepción

    2014-02-01

    The External Quality Control Program of the Spanish Society of Infectious Diseases and Clinical Microbiology (SEIMC) include controls for bacteriology, serology, mycology, parasitology, mycobacteria, virology and molecular microbiology. This article presents the most relevant conclusions and lessons from the 2012 controls. As a whole, the results obtained in 2012 confirm the excellent skill and good technical standards found in previous editions. However, erroneous results can be obtained in any laboratory and in clinically relevant determinations. Once again, the results of this program highlighted the need to implement both internal and external controls in order to assure the maximal quality of the microbiological tests. Copyright © 2014 Elsevier España, S.L. All rights reserved.

  14. [Analysis of the results of the SEIMC External Quality Control Program. Year 2014].

    Science.gov (United States)

    Gopegui Bordes, Enrique Ruiz de; Guna Serrano, M Del Remedio; Orta Mira, Nieves; Medina González, Rafael; Rosario Ovies, María; Poveda, Marta; Gimeno Cardona, Concepción

    2016-07-01

    The External Quality Control Program of the Spanish Society of Infectious Diseases and Clinical Microbiology (SEIMC) include controls for bacteriology, serology, mycology, parasitology, mycobacteria, virology and molecular microbiology. This article presents the most relevant conclusions and lessons from the 2014 controls. As a whole, the results obtained in 2014 confirm the excellent skill and good technical standards found in previous editions. However, erroneous results can be obtained in any laboratory and in clinically relevant determinations. Once again, the results of the SEIMC program highlighted the need to implement both internal and external controls in order to assure the maximal quality of the microbiological tests. Copyright © 2016 Elsevier España, S.L.U. All rights reserved.

  15. [Analysis of the results of the SEIMC External Quality Control Program. Year 2008].

    Science.gov (United States)

    Serrano, María del Remedio Guna; Mira, Nieves Orta; de Gopegui, Enrique Ruiz; Ovies, María Rosario; Cardona, Concepción Gimeno; Pérez, José L

    2010-01-01

    The External Quality Control Program of the Spanish Society of Infectious Diseases and Clinical Microbiology (SEIMC) include controls for bacteriology, serology, mycology, parasitology, mycobacteria and virology. This article present the most relevant conclusions and lessons from the 2008 controls. As a whole, the results obtained in 2008 confirm the excellent skill and good technical standards of the microbiology laboratories in Spain found in previous editions. However, a few deviations can be obtained in any laboratory, even in clinically relevant determinations. Once again, the results of this program highlighted the need to implement both internal an external controls in order to assure the maximal quality of the microbiological tests. 2010 Elsevier España S.L. All rights reserved.

  16. [Analysis of the results of the SEIMC External Quality Control Program. Year 2009].

    Science.gov (United States)

    de Gopegui Bordes, Enrique Ruiz; del Remedio Guna Serrano, M; Orta Mira, Nieves; Ovies, María; Poveda, Marta; Gimeno Cardona, Concepción; Pérez, José L

    2011-03-01

    The External Quality Control Program of the Spanish Society of Infectious Diseases and Clinical Microbiology (SEIMC) includes controls for bacteriology, serology, mycology, parasitology, mycobacteria, virology and molecular microbiology. In this article, the most important conclusions and lessons from the 2009 controls are presented. As a whole, the results obtained in 2009 confirm the excellent skill and good technical standards found in previous editions. However, erroneous results can be obtained in any laboratory and in clinically relevant determinations. The results of this program highlight the need to implement both internal and external controls in order to ensure maximal quality of microbiological tests. Copyright © 2011 Elsevier España S.L. All rights reserved.

  17. Vím, proč volím: Analýza mediální kampaně

    OpenAIRE

    Skřebská, Aneta

    2013-01-01

    This thesis contains analysis of a media campaign I know why I vote (Vím, proč volím) which took place in 2013 and 2014. Aim of this thesis is to define tools that were used when running a media campaign, evaluate its effectiveness, and provide suggestions for further improvements. The theoretical part defines environment of a non-profit organization and specifics of its marketing and public relations strategies. The practical part analyses the campaign I know why I vote (Vím, proč volím) in ...

  18. A Comparison of Types of Robot Control for Programming by Demonstration

    DEFF Research Database (Denmark)

    Fischer, Kerstin; Kirstein, Franziska; Jensen, Lars Christian

    2016-01-01

    Programming by Demonstration (PbD) is an efficient way for non-experts to teach new skills to a robot. PbD can be carried out in different ways, for instance, by kinesthetic guidance, teleoperation or by using external controls. In this paper, we compare these three ways of controlling a robot in...

  19. School-Based Smoking Prevention Programs for Middle School Students in Nowshahr- Iran: a Randomized Controlled Trial

    Directory of Open Access Journals (Sweden)

    Maryam Khazaee-Pool

    2016-11-01

    Full Text Available Background: Smoking among youths is a main public health concern, and detecting predictors of smoking is essential for designing preventive programs. Any interventional program should plan with highlighting on behavioral change models and based on operative interventional program. So, this study aimed to investigate school-based smoking prevention programs for middle school students in Nowshahr, Iran.Materials and Methods: A quasi-experimental study was performed with 280 male students aged 15-17 years selected by multistage sampling. For this purpose, 6 middle schools were randomly recruited from male students in Nowshahr- Iran. Then, 140 students were randomly chosen for each the experimental and the control groups. After pretest, educational program based on Health Belief Model were performed in experimental group. Also, post-test was applied four months after interventional program in both experimental and control group.Results: Based on the results, the prevalence of smoking was higher at age 14 old in both experimental (38.7% and control (30 % groups. About 35% of participants in the experimental group and 33.6% in control group had smoker father. Additionally, 10% in experimental group and 7.8% in control group had smoker mother. Most main cause for smoking in 57.9% of the experimental group and 52.63% of the control group was reducing anxiety. Results also shown that there was a significant difference between students in the experimental and control groups after performing educational program in the mean scores of perceived susceptibility, perceived severity, perceived benefits, perceived barriers, perceived self-efficacy, and preventive behaviors of smoking (P < 0.05.Conclusion: By performing educational program, it was found that the prevalence of cigarette smoking was decreased in the intervention group. So, with a better understanding of factors affecting on this complex behavior (cigarette smoking, it can be a valuable phase to

  20. A work-site weight control program using financial incentives collected through payroll deduction.

    Science.gov (United States)

    Forster, J L; Jeffery, R W; Sullivan, S; Snell, M K

    1985-11-01

    In a work-site weight control program using a self-motivational program of financial incentives implemented through payroll deduction, 131 university employees chose weight loss goals (0 to 60 lb) and incentives (+5 to +30) to be deducted from each paycheck for six months. Return of incentive money was contingent on progress toward weight goals. Participants were assigned randomly to one of four protocols, involving group educational sessions v self-instruction only and required v optional attendance at weigh-ins and sessions. Overall, dropout rates (21.4%) and mean weight loss (12.2 lb) were encouraging, especially compared with those of other work-site programs. Weight loss was positively associated with attendance at weigh-ins and educational sessions. However, requiring attendance did not increase program effectiveness and seemed also to discourage enrollment among men. The weight control program was equally effective when offered with professionally led educational sessions or when accompanied by self-instructional materials only.

  1. Automated Generation of Formal Models from ST Control Programs for Verification Purposes

    CERN Document Server

    Fernandez Adiego, B; Tournier, J-C; Blanco Vinuela, E; Blech, J-O; Gonzalez Suarez, V

    2014-01-01

    In large industrial control systems such as the ones installed at CERN, one of the main issues is the ability to verify the correct behaviour of the Programmable Logic Controller (PLC) programs. While manual and automated testing can achieve good results, some obvious problems remain unsolved such as the difficulty to check safety or liveness properties. This paper proposes a general methodology and a tool to verify PLC programs by automatically generating formal models for different model checkers out of ST code. The proposed methodology defines an automata-based formalism used as intermediate model (IM) to transform PLC programs written in ST language into different formal models for verification purposes. A tool based on Xtext has been implemented that automatically generates models for the NuSMV and UPPAAL model checkers and the BIP framework.

  2. Study on Production Management in Programming of Computer Numerical Control Machines

    Directory of Open Access Journals (Sweden)

    Gheorghe Popovici

    2014-12-01

    Full Text Available The paper presents the results of a study regarding the need for technology in programming for machinetools with computer-aided command. Engineering is the science of making skilled things. That is why, in the "factory of the future", programming engineering will have to realise the part processing on MU-CNCs (Computer Numerical Control Machines in the optimum economic variant. There is no "recipe" when it comes to technologies. In order to select the correct variant from among several technical variants, 10 technological requirements are forwarded for the engineer to take into account in MU-CNC programming. It is the first argued synthesis of the need for technological knowledge in MU-CNC programming.

  3. USAF Summer Research Program - 1995 Summer Faculty Research Program Final Reports, Volume 5A, Wright Laboratory

    Science.gov (United States)

    1995-12-01

    Certification. Oliver Wight Publications, Inc. Essex Junction. 1993. Ishikawa , Kaoru . (Translation by David J. Lu) What is Total Quality Control? The Japanese...approximation to the eight-harness satin weave (8H SW) is made, following the mosaic model ( Ishikawa and Chou, 1983) which treats woven composites as cross...K. W. and Bailey, J. E. (1978) Journal of Material Science, Vol. 13, pp. 195. Ishikawa , T. and Chou, T. W. (1983) One-dimensional micromechanical

  4. The high beta tokamak-extended pulse magnetohydrodynamic mode control research program

    International Nuclear Information System (INIS)

    Maurer, D A; Bialek, J; Byrne, P J; De Bono, B; Levesque, J P; Li, B Q; Mauel, M E; Navratil, G A; Pedersen, T S; Rath, N; Shiraki, D

    2011-01-01

    The high beta tokamak-extended pulse (HBT-EP) magnetohydrodynamic (MHD) mode control research program is studying ITER relevant internal modular feedback control coil configurations and their impact on kink mode rigidity, advanced digital control algorithms and the effects of plasma rotation and three-dimensional magnetic fields on MHD mode stability. A new segmented adjustable conducting wall has been installed on the HBT-EP and is made up of 20 independent, movable, wall shell segments instrumented with three distinct sets of 40 saddle coils, totaling 120 in-vessel modular feedback control coils. Each internal coil set has been designed with varying toroidal angular coil coverage of 5, 10 and 15 0 , spanning the toroidal angle range of an ITER port plug based internal coil to test resistive wall mode (RWM) interaction and multimode MHD plasma response to such highly localized control fields. In addition, we have implemented 336 new poloidal and radial magnetic sensors to quantify the applied three-dimensional fields of our control coils along with the observed plasma response. This paper describes the design and implementation of the new control shell incorporating these control and sensor coils on the HBT-EP, and the research program plan on the upgraded HBT-EP to understand how best to optimize the use of modular feedback coils to control instability growth near the ideal wall stabilization limit, answer critical questions about the role of plasma rotation in active control of the RWM and the ferritic resistive wall mode, and to improve the performance of MHD control systems used in fusion experiments and future burning plasma systems.

  5. Quantum coherent control of the vibrational dynamics of a ...

    Indian Academy of Sciences (India)

    2014-02-12

    Feb 12, 2014 ... c Indian Academy of Sciences. Vol. 82, No ... Abstract. We simulate adaptive feedback control to coherently shape a femtosecond infrared laser ... it was shown that different coherent control schemes are unified on a fundamental level. ... A 150 fs pulse with a fluence of 600 J/m2 was used as an initial pulse.

  6. REP activities of the conference of radiation control program directors

    International Nuclear Information System (INIS)

    Bevill, B.

    1995-01-01

    This talk provides an overview of the activities within the Conference of Radiation Control Program Directors associated with Radiological Emergency Preparedness. Included are summaries of interactions with FEMA, with US DOE, with US FDA, and with US DOT

  7. Egyptian Journal of Medical Human Genetics - Vol 12, No 2 (2011)

    African Journals Online (AJOL)

    Egyptian Journal of Medical Human Genetics - Vol 12, No 2 (2011) ... Serum interferon-alpha level in first degree relatives of systemic lupus erythematosus patients: Correlation with autoantibodies titers · EMAIL FREE FULL TEXT EMAIL FREE FULL ... LB Salah, CB Salem, F B'Chir, K Bouraoui, F Broly, S Saguem, 183-186.

  8. Control Strategies for Guided Collective Motion

    Science.gov (United States)

    2015-02-27

    J.K. Parrish , “Oscillator models and collective motion,” IEEE Control Systems Magzine, Vol. 27, 2007, pp. 89-105. [18] S. H. Strogatz , “From Kuramoto...Automatic Control, 54(2), 2009, pp. 353-357. [21] H. Hong and S. H. Strogatz , “Kuramoto Model of Coupled Oscillators with Positive and Negative...2013) provided similar results by utilizing a modified Kuramoto model ( Strogatz (2000)). Paley (2008) proposed a Lyapunov-based design methodology to

  9. 40 CFR Appendix A-1 to Part 50 - Reference Measurement Principle and Calibration Procedure for the Measurement of Sulfur Dioxide...

    Science.gov (United States)

    2010-07-01

    ... on a Fluorescence Method”, Journal of the Air Control Pollution Association, vol. 23, p. 514-516... Handbook for Air Pollution Measurement Systems—Volume II. Ambient Air Quality Monitoring Programs. U.S...

  10. Automatic individualized contrast medium dosage during hepatic computed tomography by using computed tomography dose index volume (CTDI{sub vol})

    Energy Technology Data Exchange (ETDEWEB)

    Svensson, Anders; Cederlund, Kerstin; Aspelin, Peter; Brismar, Torkel B. [Intervention and Technology at Karolinska Institutet, Department of Clinical Science, Division of Medical Imaging and Technology, Stockholm (Sweden); Karolinska University Hospital in Huddinge, Department of Radiology, Stockholm (Sweden); Bjoerk, Jonas [FoU-centrum Skaane Skaanes Universitetssjukhus i Lund, Lund (Sweden); Nyman, Ulf [University of Lund, Department of Diagnostic Radiology, Lasarettet Trelleborg, Trelleborg (Sweden)

    2014-08-15

    To compare hepatic parenchymal contrast media (CM) enhancement during multi-detector row computed tomography (MDCT) and its correlation with volume pitch-corrected computed tomography dose index (CTDI{sub vol}) and body weight (BW). One hundred patients referred for standard three-phase thoraco-abdominal MDCT examination were enrolled. BW was measured in the CT suite. Forty grams of iodine was administered intravenously (iodixanol 320 mg I/ml at 5 ml/s or iomeprol 400 mg I/ml at 4 ml/s) followed by a 50-ml saline flush. CTDI{sub vol} presented by the CT equipment during the parenchymal examination was recorded. The CM enhancement of the liver was defined as the attenuation HU of the liver parenchyma during the hepatic parenchymal phase minus the attenuation in the native phase. Liver parenchymal enhancement was negatively correlated to both CTDI{sub vol} (r = -0.60) and BW (r = -0.64), but the difference in correlation between those two was not significant. CTDI{sub vol} may replace BW when adjusting CM doses to body size. This makes it potentially feasible to automatically individualize CM dosage by CT. (orig.)

  11. Efficacy of some synthetic insecticides for control of cotton bollworms ...

    African Journals Online (AJOL)

    ... and Betsulfan at 3.2 l ha-1 recorded the highest and lowest yields, respectively. For effective control of cotton bollworms for maximum yield in the ecology, Thionex applied at 2.8 l ha-1 is recommended. Keywords: Control, cotton bollworms, efficacy, Ghana, synthetic insecticides. African Crop Science Journal, Vol. 20, No.

  12. [A school program for dengue control in Honduras: from knowledge to action].

    Science.gov (United States)

    Avila Montes, Gustavo Adolfo; Araujo, Roxana; Leontsini, Elli; Orellana Herrera, Gabriel; Fernández Cerna, Eduardo

    2012-06-01

    The Environmental School Program (PEA, for its Spanish acronym), a dengue control initiative focused on primary schools that took place during 2005-2010 in several cities in Honduras, is described. The environmental health program was designed to increase knowledge and develop skills in the identification and control of Aedes aegypti breeding sites, as well as in water and solid waste management. The results, as measured by behavioral change and reduced larval indices, were satisfactory in the majority of the participating schools. The initiative involved not only children, but also their parents and teachers. In addition to reducing larval indices, PEA was successful in promoting community participation in environmental issues, particularly Aedes control. The inclusion of this educational content in the primary school curriculum in Honduras remains pending.

  13. Software requirements specification for the program analysis and control system risk management module

    International Nuclear Information System (INIS)

    SCHAEFER, J.C.

    1999-01-01

    TWR Program Analysis and Control System Risk Module is used to facilitate specific data processes surrounding the Risk Management program of the Tank Waste Retrieval environment. This document contains the Risk Management system requirements of the database system

  14. Análisis de compuestos volátiles en cilantro ( L. Análisis de compuestos volátiles en cilantro (Coriandrum sativum L.

    Directory of Open Access Journals (Sweden)

    Tábata Rosales-Reyes

    2012-02-01

    Full Text Available In the present study, volatile compounds were recovered from the fresh leaves and stems ofcilantro (Coriandrum sativum L. by two methods: Liquid-Solid Extraction (LSE and SimultaneousDistillation-Extraction (SDE. The identification and quantification was done byGas Chromatography-Mass Spectrometry (GC-MS. Fourteen compounds were characterizedby LSE and GC-MS; whereas by SDE and GC-MS, they were twenty three compounds.The statistical analysis revealed significant quantitative differences (p ≤ 0,05 between theanalyzed techniques (LSE and SDE. In this work, the Simultaneous Distillation-Extractionshowed the greater identification and total concentration of volatile compounds. Aldehydes,monoterpenes, and alcohols comprised 78% of the volatile found for two methods, the restwere hydrocarbons. (E-2-decenal was the most abundant compound in cilantro in bothextraction techniques. En el presente estudio se recuperaron los compuestos volátiles de las hojas y los tallos frescos de cilantro (Coriandrum sativum L. mediante dos métodos: Extracción Sólido Líquido (LSE y Extracción-Destilación Simultánea (SDE. La identificación y cuantificación fue por Cromatografía de Gases-Espectrometría de Masas (GC-MS. Se caracterizaron catorce compuestos por LSE y GC-MS; mientras que por SDE y GC-MS, fueron veintitrés compuestos. El análisis estadístico reveló significativas diferencias cuantitativas (p ≤ 0,05 entre las técnicas analizadas (LSE y SDE. En este trabajo, la Extracción-Destilación Simultánea arrojó la mayor identificación y concentración total de compuestos volátiles. Los aldehídos, monoterpenos y alcoholes comprendieron el 78% de los volátiles encontrados por los dos métodos, el resto fueron hidrocarburos. En ambas técnicas de extracción el (E-2-decenal fue el compuesto más abundante en el cilantro.

  15. Radiotherapy procedures quality control program: Guidelines established by the Spanish Society of Radiotherapy and Oncology

    International Nuclear Information System (INIS)

    Palacios, A.; Pardo, J.; Valls, A.; Petschen, I.; Castell, A.; Villar, A.; Pedro Olive, B.A.; Munoz, V.; Fernandez, J.; Rodriguez, R.; Oton, C.

    2001-01-01

    The main purpose of the Royal Decree 1566/1998 of July 17 th , is to establish the quality criteria in radiation therapy in order to assure the optimisation of both radiation oncology treatments and radiation protection of the patients. According to this decree, the implementation of a quality control program in the radiation oncology departments is imperative. This program must be in writing and always available for supervision of health authorities. When necessary, modifications to improve non-optimal procedures or equipment will be made. The Spanish Society of Radiotherapy and Oncology, in order to co-operate and facilitate to all its members, set up a task force focussing on elaborating a set of guidelines that every single Radiation Oncology Department could use to develop its own quality control program. No agreements regarding equipment quality control were made by the Commission, in spite they are a part of the quality control program in radiotherapy, because it is considered that they correspond to members of other scientific societies. (author)

  16. Control program for punched paper tape for the PDP-8/1 computer

    International Nuclear Information System (INIS)

    German, U.

    1976-01-01

    A program was developed for the PDP-8/1 computer to control the punched paper tape supplied by the measuring instruments. Any departure from the program is detected by an optical reader which stops the tape and displays the error on an accumulator. This program which is suitable for large amounts of data punched on paper tape has been in use at the Beer-Sheva laboratories for detecting errors in the sample changing operation. (B.G.)

  17. Averaging and Linear Programming in Some Singularly Perturbed Problems of Optimal Control

    Energy Technology Data Exchange (ETDEWEB)

    Gaitsgory, Vladimir, E-mail: vladimir.gaitsgory@mq.edu.au [Macquarie University, Department of Mathematics (Australia); Rossomakhine, Sergey, E-mail: serguei.rossomakhine@flinders.edu.au [Flinders University, Flinders Mathematical Sciences Laboratory, School of Computer Science, Engineering and Mathematics (Australia)

    2015-04-15

    The paper aims at the development of an apparatus for analysis and construction of near optimal solutions of singularly perturbed (SP) optimal controls problems (that is, problems of optimal control of SP systems) considered on the infinite time horizon. We mostly focus on problems with time discounting criteria but a possibility of the extension of results to periodic optimization problems is discussed as well. Our consideration is based on earlier results on averaging of SP control systems and on linear programming formulations of optimal control problems. The idea that we exploit is to first asymptotically approximate a given problem of optimal control of the SP system by a certain averaged optimal control problem, then reformulate this averaged problem as an infinite-dimensional linear programming (LP) problem, and then approximate the latter by semi-infinite LP problems. We show that the optimal solution of these semi-infinite LP problems and their duals (that can be found with the help of a modification of an available LP software) allow one to construct near optimal controls of the SP system. We demonstrate the construction with two numerical examples.

  18. Tuberculosis control program in the municipal context: performance evaluation

    Directory of Open Access Journals (Sweden)

    Tiemi Arakawa

    Full Text Available ABSTRACT OBJECTIVE The objective of this study is to evaluate the performance of the Tuberculosis Control Program in municipalities of the State of São Paulo. METHODS This is a program evaluation research, with ecological design, which uses three non-hierarchical groups of the municipalities of the State of São Paulo according to their performance in relation to operational indicators. We have selected 195 municipalities with at least five new cases of tuberculosis notified in the Notification System of the State of São Paulo and with 20,000 inhabitants or more in 2010. The multiple correspondence analysis was used to identify the association between the groups of different performances, the epidemiological and demographic characteristics, and the characteristics of the health systems of the municipalities. RESULTS The group with the worst performance showed the highest rates of abandonment (average [avg] = 10.4, standard deviation [sd] = 9.4 and the lowest rates of supervision of Directly Observed Treatment (avg = 6.1, sd = 12.9, and it was associated with low incidence of tuberculosis, high tuberculosis and HIV, small population, high coverage of the Family Health Strategy/Program of Community Health Agents, and being located on the countryside. The group with the best performance presented the highest cure rate (avg = 83.7, sd = 10.5 and the highest rate of cases in Directly Observed Treatment (avg = 83.0, sd = 12.7; the group of regular performance showed regular results for outcome (avg cure = 79.8, sd = 13.2; abandonment avg = 9.5, sd = 8.3 and supervision of the Directly Observed Treatment (avg = 42.8, sd = 18.8. Large population, low coverage of the Family Health Strategy/Program of Community Health Agents, high incidence of tuberculosis and AIDS, and being located on the coast and in metropolitan areas were associated with these groups. CONCLUSIONS The findings highlight the importance of the Directly Observed Treatment in relation

  19. African Review of Economics and Finance - Vol 6, No 1 (2014)

    African Journals Online (AJOL)

    Journal Home > Archives > Vol 6, No 1 (2014) ... 7Implication of mergers and acquisitions on stock returns before and during the 2007–2009 credit crunch: An event study ... 9Socio-economic adaptation strategies of the urban poor in the Lagos ... and on-the-ground developing countries' realities for improved management ...

  20. South African Journal of Clinical Nutrition - Vol 29, No 3 (2016)

    African Journals Online (AJOL)

    South African Journal of Clinical Nutrition - Vol 29, No 3 (2016) ... C Marais, L van Wyk, M Conradie, D Hall, 118-121. Arm-associated measurements as estimates of true height in black and white young adults of both genders: an exploratory study, Pietermaritzburg, KwaZulu-Natal, South Africa · EMAIL FREE FULL TEXT ...

  1. The control and execution of programmed cell death

    International Nuclear Information System (INIS)

    Begum, R.; Pathak, N.; Hasnain, S.E.; Sah, N.K.; Athar, M.

    1999-01-01

    Apoptosis or programmed cell death is a highly conserved genetically controlled response of metazoan cells to commit suicide. Non apoptotic programmed cell death seems to operate in single celled eukaryotes implying that evolution of PCD has preceded the evolution of multicellularity. PCD plays a crucial role in the regulation of cellular and tissue homeostasis and any aberrations in apoptosis leads to several diseases including cancer, neurodegenerative disorders and AIDS. The mechanisms by which apoptosis is controlled are varied. In some cells, members of bcl-2 family or p53 are crucial for regulating the apoptosis programme, whereas in other cells Fas ligand is more important. bcl-2 family members have a prime role in the regulation of cell death at all stages including development, whereas cell death during development is independent of p53. bcl-2 family members being localized on the outer mitochondrial membrane, control the mitochondrial homeostasis and cytochrome c redistribution and thereby regulate the cell death process. p53 promotes DNA damage mediated cell death after growth arrest and failed DNA repair. Caspases play a key role in the execution of cell death by mediating highly specific cleavages of crucial cellular proteins collectively manifesting the apoptotic phenotype. Protein inhibitors like crm A, p35 and IAPs could prevent/control apoptosis induced by a broad array of cell death stimuli by several mechanisms specially interfering in caspase activation or caspase activity. Among endonucleases, caspase activated DNase (CAD) plays a crucial role in DNA fragmentation, a biochemical hallmark of apoptosis. As regulation of cell death seems to be as complex as regulation of cell proliferation, multiple kinase mediated regulatory mechanisms might control the apoptotic process. Thus, in spite of intensive research over the past few years, the field of apoptosis still remains fertile to unravel among others, the molecular mechanisms of cytochrome c

  2. The control and execution of programmed cell death

    Energy Technology Data Exchange (ETDEWEB)

    Begum, R.; Pathak, N.; Hasnain, S.E.; Sah, N.K. [National Inst. of Immunology, New Delhi (India). Eukaryotic Gene Expression Lab.; Taneja, T.K.; Mohan, M. [National Inst. of Immunology, New Delhi (India). Eukaryotic Gene Expression Lab.]|[Dept. of Medical Elementology and Toxicology, New Delhi (India); Athar, M. [Dept. of Medical Elementology and Toxicology, New Delhi (India)

    1999-07-01

    Apoptosis or programmed cell death is a highly conserved genetically controlled response of metazoan cells to commit suicide. Non apoptotic programmed cell death seems to operate in single celled eukaryotes implying that evolution of PCD has preceded the evolution of multicellularity. PCD plays a crucial role in the regulation of cellular and tissue homeostasis and any aberrations in apoptosis leads to several diseases including cancer, neurodegenerative disorders and AIDS. The mechanisms by which apoptosis is controlled are varied. In some cells, members of bcl-2 family or p53 are crucial for regulating the apoptosis programme, whereas in other cells Fas ligand is more important. bcl-2 family members have a prime role in the regulation of cell death at all stages including development, whereas cell death during development is independent of p53. bcl-2 family members being localized on the outer mitochondrial membrane, control the mitochondrial homeostasis and cytochrome c redistribution and thereby regulate the cell death process. p53 promotes DNA damage mediated cell death after growth arrest and failed DNA repair. Caspases play a key role in the execution of cell death by mediating highly specific cleavages of crucial cellular proteins collectivley manifesting the apoptotic phenotype. Protein inhibitors like crm A, p35 and IAPs could prevent/control apoptosis induced by a broad array of cell death stimuli by several mechanisms specially interfering in caspase activation or caspase activity. Among endonucleases, caspase activated DNase (CAD) plays a crucial role in DNA fragmentation, a biochemical hallmark of apoptosis. As regulation of cell death seems to be as complex as regulation of cell proliferation, multiple kinase mediated regulatory mechanisms might control the apoptotic process. Thus, in spite of intensive research over the past few years, the field of apoptosis still remains fertile to unravel among others, the molecular mechanisms of cytochrome c

  3. A 3-Year Workplace-Based Intervention Program to Control Noncommunicable Disease Risk Factors in Sousse, Tunisia.

    Science.gov (United States)

    Bhiri, Sana; Maatoug, Jihene; Zammit, Nawel; Msakni, Zineb; Harrabi, Imed; Amimi, Souad; Mrizek, Nejib; Ghannem, Hassen

    2015-07-01

    To assess the effectiveness of a 3-year workplace-based intervention program on the control of the main noncommunicable disease risk factors (poor nutrition, physical inactivity, and tobacco use) among the employees of Sousse, Tunisia. We conducted a quasi-experimental study (pre- and postassessments with intervention and control groups) in six companies of the governorate of Sousse in Tunisia.The intervention program consisted of health education programs (eg, workshops, films and open sensitization days). We also scheduled free physical activity sessions and free smoking cessation consultations. Our intervention program showed meaningful improvement among the employees toward dietary and physical activity behaviors but not for tobacco use. Workplace is a crucial setting for health promotion, and future programs should consider a multisectoral approach to control the main noncommunicable disease risk factors.

  4. [Analysis of the results of the SEIMC External Quality Control Program. Year 2013].

    Science.gov (United States)

    de Gopegui Bordes, Enrique Ruiz; Orta Mira, Nieves; Del Remedio Guna Serrano, M; Medina González, Rafael; Rosario Ovies, María; Poveda, Marta; Gimeno Cardona, Concepción

    2015-07-01

    The External Quality Control Program of the Spanish Society of Infectious Diseases and Clinical Microbiology (SEIMC) include controls for bacteriology, serology, mycology, parasitology, mycobacteria, virology, molecular microbiology and HIV-1, HCV and HBV viral loads. This manuscript presents the analysis of results obtained of the participants from the 2013 SEIMC External Quality Control Programme, except viral loads controls, that they are summarized in a manuscript abroad. As a whole, the results obtained in 2013 confirm the excellent skill and good technical standards found in previous editions. However, erroneous results can be obtained in any laboratory and in clinically relevant determinations. Once again, the results of this program highlighted the need to implement both internal and external controls in order to assure the maximal quality of the microbiological tests. Copyright © 2015 Elsevier España, S.L.U. All rights reserved.

  5. Young Investigator Program: Modular Paradigm for Scalable Quantum Information

    Science.gov (United States)

    2016-03-04

    actuator When both direct driving and a quantum controller are available, one can take advantage of both to achieve faster driving of the qubit. In...pointing to advantages to be found in particular geometries for larger quantum information architectures. • We investigated the effect of dephasing and...Montangero, T. Calarco, F. Nori, and M. B. Plenio, “Scal- able quantum computation via local control of only two qubits,” Phys. Rev. A, vol. 81, no. 4, p

  6. System level approaches for mainstreaming tobacco control into existing health programs in India: Perspectives from the field

    Directory of Open Access Journals (Sweden)

    Rajmohan Panda

    2015-01-01

    Full Text Available Introduction: India is the second largest consumer of tobacco in the world, and varieties of both smoked and smokeless tobacco products are widely available. The national program for tobacco control is run like a vertical stand-alone program. There is a lack of understanding of existing opportunities and barriers within the health programs that influence the integration of tobacco control messages into them. The present formative research identifies such opportunities and barriers. Methods: We conducted a multi-step, mixed methodological study of primary care personnel and policy-makers in two Indian states of Andhra Pradesh and Gujarat. The primary purpose of our study was to investigate health worker and policy-maker perceptions on the integration of tobacco control intervention. We systematically collected data in three steps: In Step I, we conducted in-depth interviews (IDIs and focus group discussions with primary care health personnel, Step II consists of a quantitative survey among health care providers (n = 1457 to test knowledge, attitudes and practices in tobacco control and Step III we conducted 75 IDIs with program heads and policy-makers to evaluate the relative congruence of their views on integration of the tobacco control program. Results: Majority of the health care providers recognized tobacco use as a major health problem. There was a general consensus for the need of training for effective dissemination of information from health care providers to patients. Almost 92% of the respondents opined that integration of tobacco control with other health programs will be highly effective to downscale the tobacco epidemic. Conclusions: Our findings suggest the need for integration of tobacco control program into existing health programs. Integration of tobacco control strategies into the health care system within primary and secondary care will be more effective and counseling for tobacco cessation should be available for population

  7. Blood Pressure Control in Hypertensive Patients in the "Hiperdia Program": A Territory-Based Study

    Directory of Open Access Journals (Sweden)

    Clarita Silva de Souza

    2014-06-01

    Full Text Available Background: Systemic hypertension is highly prevalent and an important risk factor for cardiovascular events. Blood pressure control in hypertensive patients enrolled in the Hiperdia Program, a program of the Single Health System for the follow-up and monitoring of hypertensive patients, is still far below the desired level. Objective: To describe the epidemiological profile and to assess blood pressure control of patients enrolled in Hiperdia, in the city of Novo Hamburgo (State of Rio Grande do Sul, Brazil. Methods: Cross-sectional study with a stratified cluster random sample, including 383 adults enrolled in the Hiperdia Program of the 15 Basic Health Units of the city of Porto Alegre, conducted between 2010 and 2011. Controlled blood pressure was defined as ≤140 mmHg × 90 mmHg. The hypertensive patients were interviewed and their blood pressure was measured using a calibrated aneroid device. Prevalence ratios (PR with 95% confidence interval, Wald's χ2 test, and simple and multiple Poisson regression were used in the statistical analysis. Results: The mean age was 63 ± 10 years, and most of the patients were females belonging to social class C, with a low level of education, a sedentary lifestyle, and family history positive for systemic hypertension. Diabetes mellitus (DM was observed in 31%; adherence to the antihypertensive treatment in 54.3%; and 33.7% had their blood pressure controlled. DM was strongly associated with inadequate BP control, with only 15.7% of the diabetics showing BP considered as controlled. Conclusion: Even for hypertensive patients enrolled in the Hiperdia Program, BP control is not satisfactorily reached or sustained. Diabetic hypertensive patients show the most inappropriate BP control.

  8. Cancer Control Programs in East Asia: Evidence From the International Literature

    Directory of Open Access Journals (Sweden)

    Malcolm A. Moore

    2014-07-01

    Full Text Available Cancer is a major cause of mortality and morbidity throughout the world, including the countries of North-East and South-East Asia. Assessment of burden through cancer registration, determination of risk and protective factors, early detection and screening, clinical practice, interventions for example in vaccination, tobacco cessation efforts and palliative care all should be included in comprehensive cancer control programs. The degree to which this is possible naturally depends on the resources available at local, national and international levels. The present review concerns elements of cancer control programs established in China, Taiwan, Korea, and Japan in North-East Asia, Viet Nam, Thailand, Malaysia, and Indonesia as representative larger countries of South-East Asia for comparison, using the published literature as a guide. While major advances have been made, there are still areas which need more attention, especially in South-East Asia, and international cooperation is essential if standard guidelines are to be generated to allow effective cancer control efforts throughout the Far East.

  9. Risk Analysis of Loblolly Pine Controlled Mass Pollination Program

    Science.gov (United States)

    T.D. Byram; F.E. Bridgwater

    1999-01-01

    The economic success of controlled mass pollination (CMP) depends both upon the value of the genetic gain obtained and the cost per seed. Crossing the best six loblolly pine (Pinus taeda) parents currently available in each deployment region of the Western Gulf Forest Tree Improvement Program will produce seed with an average additional gain in mean...

  10. Programmed Control of Optical Grating Scales for Visual Research.

    Science.gov (United States)

    1980-12-01

    A -AOO .9 AIR FORCE INST OF TECH WRIGHT-PATTERSON AFB OH SCHOO--ETC F/6 14/2 PROGRAMMED CONTROL OF OPTI CAL GRATING SCALES FOR VISUAL RESEARC --ETC(fl...custom system for AMRL. The cost in memory parts alone was $40,000, a good indication that the market is not over-priced. Ca-? western Reserve

  11. Tutorial Workshop on Robotics and Robot Control.

    Science.gov (United States)

    1982-10-26

    unconditional shifts can be defined as increments in the four coordinate systems described above: i8 ugT - (AJtp ia, J.u) where all components nt...Manipulators," Mechanism and Machine Theory , Pergamon Press, �, Vol. 12, pp. 515-530. D.E. Whitney, "Force Feedback Control of Manipulator Fine Motions

  12. Cholera Epidemic Control | Zachariah | Malawi Medical Journal

    African Journals Online (AJOL)

    Malawi Medical Journal. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 13, No 1 (2001) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. Cholera Epidemic Control. R Zachariah. Full Text: EMAIL FREE ...

  13. [Impact of an educational institutional program in the control of the diabetic patient].

    Science.gov (United States)

    Mendoza-Romo, Miguel Angel; Velasco-Chávez, José Fernando; Nieva de Jesús, Rafael Natividad; Andrade-Rodríguez, Héctor de Jesús; Rodríguez-Pérez, Carlos Vicente; Palou-Fraga, Elizabeth

    2013-01-01

    to assess the impact of an educational institutional program in the control of type 2 diabetic patient. intervention educational study, with quasi-experimental and self-controlled subjects. A convenience non-probabilistic sample was used including 151 patients from the program for the integral care of diabetic patients. Demographic variables: gender, age, type of insurance, somatometric and metabolic profile. The assistance to a one-year length, educational program was necessary. Descriptive and inferential parametric statistics were used. 106 women and 45 men, with age range between 15 and 87 years, and with an average of 57.22 ± 11.47, were studied. A significant decrease in body mass index, waist circumference, venous glucose fasting and post-prandial values, cholesterol, systolic blood pressure, triglycerides and glycosylated hemoglobin (t Student semi-detached, p education for the control of the diabetic patient shown a favorable pattern in most of somatometric and metabolic parameters. We suggest to extend this study over a longer period to determine if the effects persist over time.

  14. Development of a Computer Program for the Integrated Control of the Fuel Homogeneity Measurement System

    International Nuclear Information System (INIS)

    Shin, H. S.; Jang, J. W.; Lee, Y. H.; Oh, S. J.; Park, H. D.; Kim, C. K.

    2005-11-01

    The computer program is developed based on Visual C++, which is equipped with a user-friendly interface of the input/output(I/O) and a display function for the measuring conditions. This program consists of three parts which are the port communication, PLC(Programmable Logic Controller) and the MCA(Multi Channel Analyzer) control parts. The communication type between the CPU of the PLC module box and the computer is selected as be the Rs-232 asynchronous type and the thread method is adapted in the development of the first part of the program. The PLC-related program has been developed so that the data communication between the PLC CPU and the computer could be harmonized with the unique commands which have already been defined in the PLC. The measuring space and time intervals, the start and end ROI(region of interest) values, and the allowable error limitation are input at each measurement in this program. Finally the controlling MCA program has been developed by using Canberra's programming library which contains several files including the head files in which the variable and the function of C++ are declared according to the MCA function. The performance test has been carried out through an application of the developed computer program to the homogeneity measurement system. The gamma counts at 28 measuring points of a fuel rod of 700 mm in length are measured for 50 sec at each point. It was revealed that the measurement results are better than the previous ones in respects of the measurement accuracy and a measurement time saving could be achieved. It was concluded that the gamma measurement system can be improved through equipping it with the developed control program

  15. A worksite prevention program for construction workers: Design of a randomized controlled trial

    NARCIS (Netherlands)

    Oude Hengel, K.M.; Joling, C.I.; Proper, K.I.; Blatter, B.M.; Bongers, P.M.

    2010-01-01

    Background. A worksite prevention program was developed to promote the work ability of construction workers and thereby prolong a healthy working life. The objective of this paper is to present the design of a randomized controlled trial evaluating the effectiveness of that intervention program

  16. Development of the Dutch Johne's disease control program supported by a simulation model

    NARCIS (Netherlands)

    Groenendaal, H.; Nielen, M.; Hesselink, J.W.

    2003-01-01

    The development of a simulation model, "JohneSSim", was part of a research program aimed at designing a national Johne's disease control program for The Netherlands. Initially, the focus was mainly directed towards different compulsory "test-and-cull" strategies. However, the results from the

  17. National control and eradication program of bovine tuberculosis in Chile.

    Science.gov (United States)

    Max, Vanessa; Paredes, Luis; Rivera, Alejandro; Ternicier, Claudio

    2011-07-05

    There have been reports of the presence of bovine tuberculosis (TB) in Chile for more than 100 years. Several prevalence studies have revealed that there is a wide spectrum of disease across the country with certain geographic areas where the disease is endemic through to other geographic areas where infection is sporadic and at very low prevalence. In 2009, this information was used to divide Chile into different geographic zones based on prevalence rates. This will enable the correct actions to be undertaken to reduce the prevalence of TB. Thus the northern part of Chile which has a medium to high prevalence of TB will be categorized as a control zone. In contrast, the southern part of Chile which has a high proportion of the bovine population, has a low prevalence of TB and will be classified as an eradication zone (Paredes, 2008). Although there have been several past attempts to create a national control and eradication program in Chile, none has been successful. A national program is proposed, and outlined in this paper. Progress toward program initiation in 2009 has been difficult, mostly because of the global economic crisis, difficulties in the milk and meat industry, and social and political issues. Copyright © 2011 Elsevier B.V. All rights reserved.

  18. Creative Artist: A Journal of Theatre and Media Studies - Vol 8, No 2 ...

    African Journals Online (AJOL)

    Creative Artist: A Journal of Theatre and Media Studies - Vol 8, No 2 (2014) ... Social Media Use And Real-life Social Relationships: (A Study of Nnamdi ... The Impacts of Slavery and Colonialism on African Traditional Music and Dance ...

  19. A program for the numerical control of a pulse increment system

    Energy Technology Data Exchange (ETDEWEB)

    Gray, D.C.

    1963-08-21

    This report will describe the important features of the development of magnetic tapes for the numerical control of a pulse-increment system consisting of a modified Gorton lathe and its associated control unit developed by L. E. Foley of Equipment Development Service, Engineering Services, General Electric Co., Schenectady, N.Y. Included is a description of CUPID (Control and Utilization of Pulse Increment Devices), a FORTRAN program for the design of these tapes on the IBM 7090 computer, and instructions for its operation.

  20. Multiple educational programs improves glycemic control, quality of life with diminishing the impact of diabetes in poorly controlled type 1 diabetics.

    Science.gov (United States)

    Vyas, Chintan; Dalal, Lopa; Talaviya, Praful; Saboo, Banshi

    2017-12-01

    The aim of present study was to assess the outcomes of multiple educational programs on glycemic control, quality of life and impact of diabetes in poorly controlled Type 1 Diabetic patients. A 12 months diabetes education programs were conducted every week for first one month then followed by every 3 months with follow up on improvement of HbA1c and QOL in T1D patients (n=54). Clinical characteristics were recorded at baseline visit. The QOL was evaluated by 15 set DQOL questionnaires in 40 consecutive patients at baseline, 3, 6 and 12 months after education programs. The HbA1c level (%) was evaluated at same time point. Decrease in DQOL score was reported as improvement in QOL. The rate of patients response to educational programs was noted 74.07% (n=40) at end of the study (12 months). The prevalence of T1D was reported higher in men than in women. The overall DQOL score and HbA1c% level was significantly (Peducational programs. Patients exhibited greater satisfaction and diminished impact of diabetes after educational programs was observed after 3 months and it was continue up to end of study. The frequencies of self-monitoring of blood glucose were increased. Numbers of hypoglycemic and DKA events were decreased after educational programs when compared to baseline. Results of study revealed that the appropriate education and counseling diminish impact of diabetes, improve QOL and help to achieve desired glycemic (HbA1c) level in poorly control T1D patients. Copyright © 2017. Published by Elsevier Ltd.

  1. Stochastic Control of Energy Efficient Buildings: A Semidefinite Programming Approach

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Xiao [ORNL; Dong, Jin [ORNL; Djouadi, Seddik M [ORNL; Nutaro, James J [ORNL; Kuruganti, Teja [ORNL

    2015-01-01

    The key goal in energy efficient buildings is to reduce energy consumption of Heating, Ventilation, and Air- Conditioning (HVAC) systems while maintaining a comfortable temperature and humidity in the building. This paper proposes a novel stochastic control approach for achieving joint performance and power control of HVAC. We employ a constrained Stochastic Linear Quadratic Control (cSLQC) by minimizing a quadratic cost function with a disturbance assumed to be Gaussian. The problem is formulated to minimize the expected cost subject to a linear constraint and a probabilistic constraint. By using cSLQC, the problem is reduced to a semidefinite optimization problem, where the optimal control can be computed efficiently by Semidefinite programming (SDP). Simulation results are provided to demonstrate the effectiveness and power efficiency by utilizing the proposed control approach.

  2. Policy Gradient Adaptive Dynamic Programming for Data-Based Optimal Control.

    Science.gov (United States)

    Luo, Biao; Liu, Derong; Wu, Huai-Ning; Wang, Ding; Lewis, Frank L

    2017-10-01

    The model-free optimal control problem of general discrete-time nonlinear systems is considered in this paper, and a data-based policy gradient adaptive dynamic programming (PGADP) algorithm is developed to design an adaptive optimal controller method. By using offline and online data rather than the mathematical system model, the PGADP algorithm improves control policy with a gradient descent scheme. The convergence of the PGADP algorithm is proved by demonstrating that the constructed Q -function sequence converges to the optimal Q -function. Based on the PGADP algorithm, the adaptive control method is developed with an actor-critic structure and the method of weighted residuals. Its convergence properties are analyzed, where the approximate Q -function converges to its optimum. Computer simulation results demonstrate the effectiveness of the PGADP-based adaptive control method.

  3. Reducing Violence in Non-Controlling Ways: A Change Program Based on Self Determination Theory

    Science.gov (United States)

    Assor, Avi; Feinberg, Ofra; Kanat-Maymon, Yaniv; Kaplan, Haya

    2018-01-01

    This paper presents and examines the first school change program focusing on violence and caring based on self-determination theory (Deci & Ryan, 2012). The program aimed at promoting teachers' capacity to cope with violence and enhance caring without becoming more controlling. Comparisons of the effects of a 22-month-long program in three…

  4. The History and Use of Cancer Registry Data by Public Health Cancer Control Programs in the United States

    Science.gov (United States)

    White, Mary C.; Babcock, Frances; Hayes, Nikki S.; Mariotto, Angela B.; Wong, Faye L.; Kohler, Betsy A.; Weir, Hannah K.

    2018-01-01

    Because cancer registry data provide a census of cancer cases, registry data can be used to: 1) define and monitor cancer incidence at the local, state, and national levels; 2) investigate patterns of cancer treatment; and 3) evaluate the effectiveness of public health efforts to prevent cancer cases and improve cancer survival. The purpose of this article is to provide a broad overview of the history of cancer surveillance programs in the United States, and illustrate the expanding ways in which cancer surveillance data are being made available and contributing to cancer control programs. The article describes the building of the cancer registry infrastructure and the successful coordination of efforts among the 2 federal agencies that support cancer registry programs, the Centers for Disease Control and Prevention and the National Cancer Institute, and the North American Association of Central Cancer Registries. The major US cancer control programs also are described, including the National Comprehensive Cancer Control Program, the National Breast and Cervical Cancer Early Detection Program, and the Colorectal Cancer Control Program. This overview illustrates how cancer registry data can inform public health actions to reduce disparities in cancer outcomes and may be instructional for a variety of cancer control professionals in the United States and in other countries. PMID:29205307

  5. A Controlled Randomized Preliminary Trial of a Modified Dissonance-Based Eating Disorder Intervention Program.

    Science.gov (United States)

    Green, M A; Willis, M; Fernandez-Kong, K; Reyes, S; Linkhart, R; Johnson, M; Thorne, T; Lindberg, J; Kroska, E; Woodward, H

    2017-12-01

    We conducted a controlled randomized preliminary trial of a modified dissonance-based eating disorder program (n = 24) compared to an assessment-only control condition (n = 23) via a longitudinal design (baseline, postintervention, 2-month follow-up) in a community sample of women (N = 47) with clinical (n = 22) and subclinical (n = 25) eating disorder symptoms. The traditional content of the Body Project, a dissonance-based eating disorder prevention program, was modified to include verbal, written, and behavioral exercises designed to dissuade self-objectification and maladaptive social comparison. Women with clinical and subclinical symptoms were included in the target audience to investigate both the treatment and the indicated prevention utility of the modified dissonance program. Body dissatisfaction, self-esteem, self-objectification, thin-ideal internalization, maladaptive social comparison, trait anxiety, and eating disorder symptoms were evaluated in the control and the modified dissonance condition at baseline, postintervention, and 2-month follow-up. We predicted a statistically significant 2 (condition: control, modified dissonance) x 3 (time: baseline, postintervention, 2-month follow-up) interaction in the mixed factorial multivariate analyses of variance results. Results confirmed this hypothesis. Eating disorder risk factors and symptoms decreased significantly among participants in the modified dissonance condition at postintervention and 2-month follow-up compared to baseline; symptom improvement was greater among participants in the modified compared to the control condition. A secondary analysis indicated symptom improvement did not vary as a function of symptom status (clinical, subclinical), suggesting the program is efficacious in both indicated prevention and treatment applications. Results provide preliminary support for the modified dissonance program. © 2017 Wiley Periodicals, Inc.

  6. 49. Meeting of the Chemical Societies: Proceedings of the contributions. Vol. 2

    International Nuclear Information System (INIS)

    Uher, M.; Benes, P.; Carsky, J.; Chodak, I.; Kuruc, J.; Romancik, V.; Stasko, A. Slovak Technical Univ., Bratislava

    1995-09-01

    The publication has been set up as a abstracts of the meeting dealing with chemical problems. The book (Vol. 2) consists of the sections: (C) Physical chemistry; (D) History of the chemistry; (E) Food chemistry and technology; (D) Environmental chemistry; (E) Nuclear chemistry and radioecology; (H) Synthetic polymers

  7. Journal of Child and Adolescent Mental Health - Vol 25, No 1 (2013)

    African Journals Online (AJOL)

    Journal of Child and Adolescent Mental Health - Vol 25, No 1 (2013) ... Autism spectrum disorders—Global challenges and local opportunities · EMAIL ... Peer education training for sexual health and well-being in public high schools in ... Evaluation of a school-based intervention programme for South African children of ...

  8. Sound Control-Flow Graph Extraction for Java Programs with Exceptions

    NARCIS (Netherlands)

    Amighi, A.; de Carvalho Gomes, Pedro; Gurov, Dilian; Huisman, Marieke; Eleftherakis, George; Hinchey, Mike; Holcombe, Mike

    2012-01-01

    We present an algorithm to extract control-flow graphs from Java bytecode, considering exceptional flows. We then establish its correctness: the behavior of the extracted graphs is shown to be a sound over-approximation of the behavior of the original programs. Thus, any temporal safety property

  9. Program for control and editing the output data of spiral reader

    International Nuclear Information System (INIS)

    Yamburenko, V.S.

    1983-01-01

    The program forming the magnetic tape with outpug data of Spiral Reader from that one containing initial data for computing on big computers is desribed. The program is controlled by ''operator-computer'' dialogue using the HT-340 display. During rewriting the data structure and quality are checked. Manual and automatic modes of rewriting are possible. The editing mode permits to create easily arrays of data of a given format. The magnetic tapes format and data structure are also described

  10. Hamilton-Jacobi-Bellman equations for quantum control | Ogundiran ...

    African Journals Online (AJOL)

    The aim of this work is to study Hamilton-Jacobi-Bellman equation for quantum control driven by quantum noises. These noises are annhihilation, creation and gauge processes. We shall consider the solutions of Hamilton-Jacobi-Bellman equation via the Hamiltonian system measurable in time. JONAMP Vol. 11 2007: pp.

  11. Risk Assessment on the Transition Program for Air Traffic Control Automation System Upgrade

    Directory of Open Access Journals (Sweden)

    Li Dong Bin

    2016-01-01

    Full Text Available We analyzed the safety risks of the transition program for Air Traffic Control (ATC automation system upgrade by using the event tree analysis method in this paper. We decomposed the occurrence progress of the three transition phase and built the event trees corresponding to the three stages, and then we determined the probability of success of each factor and calculated probability of success of the air traffic control automation system upgrade transition. In the conclusion, we illustrate the transition program safety risk according to the results.

  12. Cohort Study of the Success of Controlled Weight Loss Programs for Obese Dogs.

    Science.gov (United States)

    German, A J; Titcomb, J M; Holden, S L; Queau, Y; Morris, P J; Biourge, V

    2015-01-01

    Most weight loss studies in obese dogs assess rate and percentage of weight loss in the first 2-3 months, rather than the likelihood of successfully reaching target weight. To determine outcome of controlled weight loss programs for obese dogs, and to determine the factors associated with successful completion. 143 obese dogs undergoing a controlled weight loss program. This was a cohort study of obese dogs attending a referral weight management clinic. Dogs were studied during their period of weight loss, and cases classified according to outcome as "completed" (reached target weight), "euthanized" (was euthanized before reaching target weight), or "stopped prematurely" (program stopped early for other reasons). Factors associated with successful completion were assessed using simple and multiple logistic regression. 87/143 dogs (61%) completed their weight loss program, 11 [8%] died or were euthanized, and the remaining 45 [32%] stopped prematurely. Reasons for dogs stopping prematurely included inability to contact owner, refusal to comply with weight management advice, or development of another illness. Successful weight loss was positively associated with a faster rate (P obese dogs on a controlled weight loss program reach their target weight. Future studies should better clarify reasons for success in individual cases, and also the role of factors such as activity and behavioral modification. Copyright © 2015 The Authors. Journal of Veterinary Internal Medicine published by Wiley Periodicals, Inc. on behalf of the American College of Veterinary Internal Medicine.

  13. CONTROL: the run control program used on the WA62 VAX data acquisition system at CERN

    International Nuclear Information System (INIS)

    Hand, R.P.

    1980-11-01

    The criteria are described which have been used in the design of CONTROL, a program in the WA62 VAX Native mode data acquisition system which serves the triple purpose of driving a status display, an operator's console and a message reporter. (U.K.)

  14. DCS-Neural-Network Program for Aircraft Control and Testing

    Science.gov (United States)

    Jorgensen, Charles C.

    2006-01-01

    A computer program implements a dynamic-cell-structure (DCS) artificial neural network that can perform such tasks as learning selected aerodynamic characteristics of an airplane from wind-tunnel test data and computing real-time stability and control derivatives of the airplane for use in feedback linearized control. A DCS neural network is one of several types of neural networks that can incorporate additional nodes in order to rapidly learn increasingly complex relationships between inputs and outputs. In the DCS neural network implemented by the present program, the insertion of nodes is based on accumulated error. A competitive Hebbian learning rule (a supervised-learning rule in which connection weights are adjusted to minimize differences between actual and desired outputs for training examples) is used. A Kohonen-style learning rule (derived from a relatively simple training algorithm, implements a Delaunay triangulation layout of neurons) is used to adjust node positions during training. Neighborhood topology determines which nodes are used to estimate new values. The network learns, starting with two nodes, and adds new nodes sequentially in locations chosen to maximize reductions in global error. At any given time during learning, the error becomes homogeneously distributed over all nodes.

  15. [Resource allocation analysis for international cooperation program for HIV/AIDS prevention and control].

    Science.gov (United States)

    Li, Hui; Xue, Hui; Liu, Hui; Guo, Hao-yan; Zhang, Hua; Sun, Jiang-ping

    2008-12-01

    To provide evidence for resource allocation and cooperation between domestic and international HIV/AIDS programs in China by analyzing the needs and current levels of resource input in provinces. National and provincial international cooperation program investment and allocation data from 2000 to 2006 were collected. Several factors in each province were analyzed through multiple regression analysis in order to determine whether they had a statistical correlation to the distribution of international HIV/AIDS program resources in China, including: the Gross Domestic Product (GDP), the number of accumulated people living with HIV/AIDS, and the number of accumulated people living with AIDS. Then the Z values were calculated at each provincial level and compared with related international investment. The resource allocation in different program areas were compared with the level of resource input by international and central government HIV/AIDS prevention and control programs through Chi-square test. The international cooperation program investment at local level from 2000 to 2006 were 4893, 24 669, 50 567, 52 950, 112 143, 363 396 and 247 045 thousand RMB respectively, and at national level were 3007, 19 726, 29 035, 37 530, 77 500, 105 786 and 77 035 thousand RMB respectively. There was a statistical correlation between international HIV/AIDS program resource input and the accumulated number of people living with AIDS (R is 0.56 and 0.69 accordingly, and P international resource input and the GDP of each province. International HIV/AIDS cooperation programs did not invest in each province according to its practical needs (R = 0.066, P = 0.725). The international cooperation program investments and needs in different province could not meet completely. The ranks of Z value in Guangdong, Shandong and Jiangsu were 3, 5 and 6, but the ranks of international cooperation program in those provinces were 18, 13 and 28 respectively. The investment proportion for national

  16. Synthèse: Revue des Sciences et de la Technologie - Vol 24 (2015)

    African Journals Online (AJOL)

    Synthèse: Revue des Sciences et de la Technologie - Vol 24 (2015) ... hygrothermique en eau douce sur un composite unidirectionnel verre-époxy · EMAIL ... Problèmes de type obstacle : algorithmes de résolution · EMAIL FREE FULL TEXT ...

  17. Liquefied gaseous fuels safety and environmental control assessment program: third status report

    Energy Technology Data Exchange (ETDEWEB)

    1982-03-01

    This Status Report contains contributions from all contractors currently participating in the DOE Liquefied Gaseous Fuels (LG) Safety and Environmental Control Assessment Program and is presented in two principal sections. Section I is an Executive Summary of work done by all program participants. Section II is a presentation of fourteen individual reports (A through N) on specific LGF Program activities. The emphasis of Section II is on research conducted by Lawrence Livermore National Laboratory (Reports A through M). Report N, an annotated bibliography of literature related to LNG safety and environmental control, was prepared by Pacific Northwest Laboratory (PNL) as part of its LGF Safety Studies Project. Other organizations who contributed to this Status Report are Aerojet Energy Conversion Company; Applied Technology Corporation; Arthur D. Little, Incorporated; C/sub v/ International, Incorporated; Institute of Gas Technology; and Massachusetts Institute of Technology. Separate abstracts have been prepared for Reports A through N for inclusion in the Energy Data Base.

  18. Development and demonstration program for dynamic nuclear materials control

    International Nuclear Information System (INIS)

    Augustson, R.H.; Baron, N.; Ford, R.F.; Ford, W.; Hagen, J.; Li, T.K.; Marshall, R.S.; Reams, V.S.; Severe, W.R.; Shirk, D.G.

    1978-01-01

    A significant portion of the Los Alamos Scientific Laboratory Safeguards Program is directed toward the development and demonstration of dynamic nuclear materials control. The building chosen for the demonstration system is the new Plutonium Processing Facility in Los Alamos, which houses such operations as metal-to-oxide conversion, fuel pellet fabrication, and scrap recovery. A DYnamic MAterials Control (DYMAC) system is currently being installed in the facility as an integral part of the processing operation. DYMAC is structured around interlocking unit-process accounting areas. It relies heavily on nondestructive assay measurements made in the process line to draw dynamic material balances in near real time. In conjunction with the nondestructive assay instrumentation, process operators use interactive terminals to transmit additional accounting and process information to a dedicated computer. The computer verifies and organizes the incoming data, immediately updates the inventory records, monitors material in transit using elapsed time, and alerts the Nuclear Materials Officer in the event that material balances exceed the predetermined action limits. DYMAC is part of the United States safeguards system under control of the facility operator. Because of its advanced features, the system will present a new set of inspection conditions to the IAEA, whose response is the subject of a study being sponsored by the US-IAEA Technical Assistance Program. The central issue is how the IAEA can use the increased capabilities of such a system and still maintain independent verification

  19. Experimental Studies of Hydrocarbon Flame Phenomena: Enabling Combustion Control

    Science.gov (United States)

    2016-07-30

    flames," Physics of Fluids , vol. 7, no. 6, pp. 1447-54, 1995. [8] K. Lyons, " Toward an understanding of the stabilization mechanisms of lifted...Experimental Studies of Hydrocarbon Flame Phenomena: Enabling Combustion Control This report summarizes the research accomplished in the project...34Experimental Studies of Hydrocarbon Flame Phenomena: Enabling Combustion Control". The main areas of activity are: a) electrostatic flame and flow

  20. Explicit/multi-parametric model predictive control (MPC) of linear discrete-time systems by dynamic and multi-parametric programming

    KAUST Repository

    Kouramas, K.I.

    2011-08-01

    This work presents a new algorithm for solving the explicit/multi- parametric model predictive control (or mp-MPC) problem for linear, time-invariant discrete-time systems, based on dynamic programming and multi-parametric programming techniques. The algorithm features two key steps: (i) a dynamic programming step, in which the mp-MPC problem is decomposed into a set of smaller subproblems in which only the current control, state variables, and constraints are considered, and (ii) a multi-parametric programming step, in which each subproblem is solved as a convex multi-parametric programming problem, to derive the control variables as an explicit function of the states. The key feature of the proposed method is that it overcomes potential limitations of previous methods for solving multi-parametric programming problems with dynamic programming, such as the need for global optimization for each subproblem of the dynamic programming step. © 2011 Elsevier Ltd. All rights reserved.

  1. Design Challenges Encountered in a Propulsion-Controlled Aircraft Flight Test Program

    Science.gov (United States)

    Maine, Trindel; Burken, John; Burcham, Frank; Schaefer, Peter

    1994-01-01

    The NASA Dryden Flight Research Center conducted flight tests of a propulsion-controlled aircraft system on an F-15 airplane. This system was designed to explore the feasibility of providing safe emergency landing capability using only the engines to provide flight control in the event of a catastrophic loss of conventional flight controls. Control laws were designed to control the flightpath and bank angle using only commands to the throttles. Although the program was highly successful, this paper highlights some of the challenges associated with using engine thrust as a control effector. These challenges include slow engine response time, poorly modeled nonlinear engine dynamics, unmodeled inlet-airframe interactions, and difficulties with ground effect and gust rejection. Flight and simulation data illustrate these difficulties.

  2. Components of effective randomized controlled trials of hydrotherapy programs for fibromyalgia syndrome: A systematic review.

    Science.gov (United States)

    Perraton, Luke; Machotka, Zuzana; Kumar, Saravana

    2009-11-30

    Previous systematic reviews have found hydrotherapy to be an effective management strategy for fibromyalgia syndrome (FMS). The aim of this systematic review was to summarize the components of hydrotherapy programs used in randomized controlled trials. A systematic review of randomized controlled trials was conducted. Only trials that have reported significant FMS-related outcomes were included. Data relating to the components of hydrotherapy programs (exercise type, duration, frequency and intensity, environmental factors, and service delivery) were analyzed. Eleven randomized controlled trials were included in this review. Overall, the quality of trials was good. Aerobic exercise featured in all 11 trials and the majority of hydrotherapy programs included either a strengthening or flexibility component. Great variability was noted in both the environmental components of hydrotherapy programs and service delivery. Aerobic exercise, warm up and cool-down periods and relaxation exercises are common features of hydrotherapy programs that report significant FMS-related outcomes. Treatment duration of 60 minutes, frequency of three sessions per week and an intensity equivalent to 60%-80% maximum heart rate were the most commonly reported exercise components. Exercise appears to be the most important component of an effective hydrotherapy program for FMS, particularly when considering mental health-related outcomes.

  3. Diesel Emission Control -- Sulfur Effects (DECSE) Program; Phase I Interim Data Report No. 1

    Energy Technology Data Exchange (ETDEWEB)

    DOE; ORNL; NREL; EMA; MECA

    1999-08-15

    The Diesel Emission Control-Sulfur Effects (DECSE) is a joint government/industry program to determine the impact of diesel fuel sulfur levels on emission control systems whose use could lower emissions of nitrogen oxides (NO{sub x}) and particulate matter (PM) from on-highway trucks in the 2002--2004 model years. Phase 1 of the program was developed with the following objectives in mind: (1) evaluate the effects of varying the level of sulfur content in the fuel on the emission reduction performance of four emission control technologies; and (2) measure and compare the effects of up to 250 hours of aging on selected devices for multiple levels of fuel sulfur content. This interim data report summarizes results as of August, 1999, on the status of the test programs being conducted on three technologies: lean-NO{sub x} catalysts, diesel particulate filters and diesel oxidation catalysts.

  4. Development and implementation of an automated quantitative film digitizer quality control program

    Science.gov (United States)

    Fetterly, Kenneth A.; Avula, Ramesh T. V.; Hangiandreou, Nicholas J.

    1999-05-01

    A semi-automated, quantitative film digitizer quality control program that is based on the computer analysis of the image data from a single digitized test film was developed. This program includes measurements of the geometric accuracy, optical density performance, signal to noise ratio, and presampled modulation transfer function. The variability of the measurements was less than plus or minus 5%. Measurements were made on a group of two clinical and two laboratory laser film digitizers during a trial period of approximately four months. Quality control limits were established based on clinical necessity, vendor specifications and digitizer performance. During the trial period, one of the digitizers failed the performance requirements and was corrected by calibration.

  5. Air Breathing Propulsion Controls and Diagnostics Research at NASA Glenn Under NASA Aeronautics Research Mission Programs

    Science.gov (United States)

    Garg, Sanjay

    2015-01-01

    The Intelligent Control and Autonomy Branch (ICA) at NASA (National Aeronautics and Space Administration) Glenn Research Center (GRC) in Cleveland, Ohio, is leading and participating in various projects in partnership with other organizations within GRC and across NASA, the U.S. aerospace industry, and academia to develop advanced controls and health management technologies that will help meet the goals of the NASA Aeronautics Research Mission Directorate (ARMD) Programs. These efforts are primarily under the various projects under the Advanced Air Vehicles Program (AAVP), Airspace Operations and Safety Program (AOSP) and Transformative Aeronautics Concepts Program (TAC). The ICA Branch is focused on advancing the state-of-the-art of aero-engine control and diagnostics technologies to help improve aviation safety, increase efficiency, and enable operation with reduced emissions. This paper describes the various ICA research efforts under the NASA Aeronautics Research Mission Programs with a summary of motivation, background, technical approach, and recent accomplishments for each of the research tasks.

  6. Implementing preventive chemotherapy through an integrated National Neglected Tropical Disease Control Program in Mali.

    Directory of Open Access Journals (Sweden)

    Massitan Dembélé

    Full Text Available BACKGROUND: Mali is endemic for all five targeted major neglected tropical diseases (NTDs. As one of the five 'fast-track' countries supported with the United States Agency for International Development (USAID funds, Mali started to integrate the activities of existing disease-specific national control programs on these diseases in 2007. The ultimate objectives are to eliminate lymphatic filariasis, onchocerciasis and trachoma as public health problems and to reduce morbidity caused by schistosomiasis and soil-transmitted helminthiasis through regular treatment to eligible populations, and the specific objectives were to achieve 80% program coverage and 100% geographical coverage yearly. The paper reports on the implementation of the integrated mass drug administration and the lessons learned. METHODOLOGY/PRINCIPAL FINDINGS: The integrated control program was led by the Ministry of Health and coordinated by the national NTD Control Program. The drug packages were designed according to the disease endemicity in each district and delivered through various platforms to eligible populations involving the primary health care system. Treatment data were recorded and reported by the community drug distributors. After a pilot implementation of integrated drug delivery in three regions in 2007, the treatment for all five targeted NTDs was steadily scaled up to 100% geographical coverage by 2009, and program coverage has since been maintained at a high level: over 85% for lymphatic filariasis, over 90% for onchocerciasis and soil-transmitted helminthiasis, around 90% in school-age children for schistosomiasis, and 76-97% for trachoma. Around 10 million people have received one or more drug packages each year since 2009. No severe cases of adverse effects were reported. CONCLUSIONS/SIGNIFICANCE: Mali has scaled up the drug treatment to national coverage through integrated drug delivery involving the primary health care system. The successes and lessons

  7. An appraisal of oak wilt control programs in Pennsylvania and West Virginia

    Science.gov (United States)

    Thomas W. Jones; Thomas W. Jones

    1971-01-01

    Attempts to control oak wilt, ranging from relatively smallscale experiments to statewide programs, have been made in many States. Among the few currently active, those of Pennsylvania and West Virginia are notable for their size and duration. The pest-control organizations of the Pennsylvania Department of Agriculture and the West Virginia Department of Agriculture...

  8. Programming for controlling of pulse radiolysis setup. Program RADIO96

    International Nuclear Information System (INIS)

    Mirkowski, J.; Grodkowski, J.

    1998-01-01

    Program RADIO96 was written in Pascal using DELPHI 1.0 (Borland) programming platform. It can operate on IBM PC compatible computers in WINDOWS 3x or WINDOWS'95 environment. The program is dedicated to the pulse radiolysis setup based on the linear electron accelerator LAE 13/9 of the Department of Radiation Chemistry and Technology of the INCT. This work was based on apparatus and results described before and also on programming manuals of used equipment and technical data of programming platform. (author)

  9. Gynecologic Cancer Prevention and Control in the National Comprehensive Cancer Control Program: Progress, Current Activities, and Future Directions

    OpenAIRE

    Stewart, Sherri L.; Lakhani, Naheed; Brown, Phaeydra M.; Larkin, O. Ann; Moore, Angela R.; Hayes, Nikki S.

    2013-01-01

    Gynecologic cancer confers a large burden among women in the United States. Several evidence-based interventions are available to reduce the incidence, morbidity, and mortality from these cancers. The National Comprehensive Cancer Control Program (NCCCP) is uniquely positioned to implement these interventions in the US population. This review discusses progress and future directions for the NCCCP in preventing and controlling gynecologic cancer.

  10. Gynecologic cancer prevention and control in the National Comprehensive Cancer Control Program: progress, current activities, and future directions.

    Science.gov (United States)

    Stewart, Sherri L; Lakhani, Naheed; Brown, Phaeydra M; Larkin, O Ann; Moore, Angela R; Hayes, Nikki S

    2013-08-01

    Gynecologic cancer confers a large burden among women in the United States. Several evidence-based interventions are available to reduce the incidence, morbidity, and mortality from these cancers. The National Comprehensive Cancer Control Program (NCCCP) is uniquely positioned to implement these interventions in the US population. This review discusses progress and future directions for the NCCCP in preventing and controlling gynecologic cancer.

  11. Control Coordination of Large Scale Hereditary Systems.

    Science.gov (United States)

    1985-07-01

    Theory - A Hilbert Space Approach, (Academic Press, New York, 1982). [4] W. Findeisen , F. N. Bailey, M. Brdys, K Malinowski, P. Tatjewski and A. Wozniak... Findeisen et al. (1980), in the sense that local models are used in the design of component control laws and a higher level coordination problem is...Vol. 1, pp. 590-591, 1985. 3. W. Findeisen , F.N. Bailley, M. Brdys, K. Malinowski, P. Tatjewski and A. Wozniak, Control Coordination in Hierarchical

  12. Program evaluation and review system for the Division of Energy Storage Systems. Progress report, January 1, 1978--March 31, 1978. [SPERS

    Energy Technology Data Exchange (ETDEWEB)

    Wechsler, B L

    1978-04-01

    The detail design for SPERS has been completed with the exception of STORS user inputs to that design. Programming activities for the system have been started but the project is now some three weeks behind schedule in this respect. Details of the in-process review held in February are included in an appendix. The first report on this program is COO/4454-1 and appears in ERA Vol. 3 Abstract No. 29976.

  13. Computerization aspects of the Health Physics' Radiation Control Program at Argonne National Laboratory

    International Nuclear Information System (INIS)

    Dolecek, Elwyn H.

    1978-01-01

    Greater public awareness of the potential hazards of ionizing radiation and the more stringent governmental compliance programs have made accountability of radioactive materials an item of increasingly major concern for all radionuclide users. For low-volume (radioisotopically) organizations, manual record keeping techniques may suffice without requiring significant work-hour allocations. When considering high-volume users, the workload contingent with manual inventory is usually excessive from an employee time-allocation standpoint. Therefore, various automation systems are employed, usually with the aid of an in-house or time-purchase computer system. The computer programs developed for these systems often do not allow for future modification without major rewriting. Therefore, to facilitate in program concept, modification, and implementation the Health Physics Section at Argonne National Laboratory chose to design and code its computer program(s) and has instituted a Radiation Administrative Program (RAP) as a major component of the Section's laboratory-wide radiation control program. Coded in ANSI PL/I, RAP provides both flexibility in present concept and allowance for future growth. It requires less than 300K words of computer memory and can be easily incorporated at other organizations with minimal modifications. The modular design provides run cost benefits and versatility of report generation and modification. Through the use of this type of information processing and retrieval system, one can manipulate large amounts of radionuclide data, providing control and identification, while still maintaining commitment of computer costs and employee time at a reasonable level. (author)

  14. Laser Beam Shaping XIII, Proceedings of SPIE Vol. 8490

    CSIR Research Space (South Africa)

    Forbes, A

    2012-09-01

    Full Text Available .1117/12.2013615 Proc. of SPIE Vol. 8490 849001-1 Downloaded From: http://proceedings.spiedigitallibrary.org/ on 10/17/2012 Terms of Use: http://spiedl.org/terms The papers included in this volume were part of the technical conference cited on the cover and title..., Bellingham, Washington 98227-0010 USA Telephone +1 360 676 3290 (Pacific Time)? Fax +1 360 647 1445 SPIE.org Copyright ? 2012, Society of Photo-Optical Instrumentation Engineers. Copying of material in this book for internal or personal use...

  15. Fundamental attributes of a practical configuration management program for nuclear plant design control

    International Nuclear Information System (INIS)

    Klein, S.M.

    1988-06-01

    This summarizes the results of an evaluation of findings identifies during a number of Safety-System Functional Inspections and Safety System Outage Modification Inspections which are related to configuration management for nuclear plant design control. A computerized database of these findings was generated from a review of the design inspection reports. Based on the results of the evaluation, attributes of a configuration management program were developed which are responsive to minimizing these types of inspection findings. Incorporation of these key attributes is considered good practice in the development of a configuration management program for design control at operating nuclear plants

  16. A two-step method for developing a control rod program for boiling water reactors

    International Nuclear Information System (INIS)

    Taner, M.S.; Levine, S.H.; Hsiao, M.Y.

    1992-01-01

    This paper reports on a two-step method that is established for the generation of a long-term control rod program for boiling water reactors (BWRs). The new method assumes a time-variant target power distribution in core depletion. In the new method, the BWR control rod programming is divided into two steps. In step 1, a sequence of optimal, exposure-dependent Haling power distribution profiles is generated, utilizing the spectral shift concept. In step 2, a set of exposure-dependent control rod patterns is developed by using the Haling profiles generated at step 1 as a target. The new method is implemented in a computer program named OCTOPUS. The optimization procedure of OCTOPUS is based on the method of approximation programming, in which the SIMULATE-E code is used to determine the nucleonics characteristics of the reactor core state. In a test in cycle length over a time-invariant, target Haling power distribution case because of a moderate application of spectral shift. No thermal limits of the core were violated. The gain in cycle length could be increased further by broadening the extent of the spetral shift

  17. The Alzheimer's Association external quality control program for cerebrospinal fluid biomarkers

    DEFF Research Database (Denmark)

    Mattsson, Niklas; Andreasson, Ulf; Persson, Staffan

    2011-01-01

    . The Alzheimer's Association has initiated a global quality control program to estimate and monitor variability of measurements, quantify batch-to-batch assay variations, and identify sources of variability. In this article, we present the results from the first two rounds of the program.......The cerebrospinal fluid (CSF) biomarkers amyloid β (Aβ)-42, total-tau (T-tau), and phosphorylated-tau (P-tau) demonstrate good diagnostic accuracy for Alzheimer's disease (AD). However, there are large variations in biomarker measurements between studies, and between and within laboratories...

  18. Adaptive dynamic programming with applications in optimal control

    CERN Document Server

    Liu, Derong; Wang, Ding; Yang, Xiong; Li, Hongliang

    2017-01-01

    This book covers the most recent developments in adaptive dynamic programming (ADP). The text begins with a thorough background review of ADP making sure that readers are sufficiently familiar with the fundamentals. In the core of the book, the authors address first discrete- and then continuous-time systems. Coverage of discrete-time systems starts with a more general form of value iteration to demonstrate its convergence, optimality, and stability with complete and thorough theoretical analysis. A more realistic form of value iteration is studied where value function approximations are assumed to have finite errors. Adaptive Dynamic Programming also details another avenue of the ADP approach: policy iteration. Both basic and generalized forms of policy-iteration-based ADP are studied with complete and thorough theoretical analysis in terms of convergence, optimality, stability, and error bounds. Among continuous-time systems, the control of affine and nonaffine nonlinear systems is studied using the ADP app...

  19. A multi-site controlled trial of a cognitive skills program for mentally disordered offenders.

    Science.gov (United States)

    Rees-Jones, Angharad; Gudjonsson, Gisli; Young, Susan

    2012-05-18

    The effectiveness of offending behaviour programs in forensic mental health settings is not well established. Thus this study aimed to evaluate the Reasoning and Rehabilitation Mental Health program (R&R2 MHP) among a mentally disordered offender (MDO) population. A sample of 121 adult males drawn from 10 forensic mental health sites completed questionnaires at baseline and post-treatment to assess violent attitudes, locus of control, social problem-solving and anger. An informant measure of social and psychological functioning, including disruptive behaviour, was completed by unit staff at the same time. At three month follow-up patients completed again the violent attitudes and locus of control questionnaires. The data of 67 patients who participated in the group condition were compared with 54 waiting-list controls who received treatment as usual. 78% of group participants completed the program. In contrast to controls, significant treatment effects were found at outcome on self-reported measures of violent attitudes, rational problem-solving and anger cognitions. Improvements were endorsed by informant ratings of social and psychological functioning within the establishments. At follow-up significant treatment effects were found for both violent attitudes and locus of control. R&R2 MHP was effective in a sample of MDOs and had a comparatively low drop-out rate. Future research should use a randomized controlled design.

  20. A multi-site controlled trial of a cognitive skills program for mentally disordered offenders

    Directory of Open Access Journals (Sweden)

    Rees-Jones Angharad

    2012-05-01

    Full Text Available Abstract Background The effectiveness of offending behaviour programs in forensic mental health settings is not well established. Thus this study aimed to evaluate the Reasoning and Rehabilitation Mental Health program (R&R2 MHP among a mentally disordered offender (MDO population. Methods A sample of 121 adult males drawn from 10 forensic mental health sites completed questionnaires at baseline and post-treatment to assess violent attitudes, locus of control, social problem-solving and anger. An informant measure of social and psychological functioning, including disruptive behaviour, was completed by unit staff at the same time. At three month follow-up patients completed again the violent attitudes and locus of control questionnaires. The data of 67 patients who participated in the group condition were compared with 54 waiting-list controls who received treatment as usual. Results 78% of group participants completed the program. In contrast to controls, significant treatment effects were found at outcome on self-reported measures of violent attitudes, rational problem-solving and anger cognitions. Improvements were endorsed by informant ratings of social and psychological functioning within the establishments. At follow-up significant treatment effects were found for both violent attitudes and locus of control. Conclusions R&R2 MHP was effective in a sample of MDOs and had a comparatively low drop-out rate. Future research should use a randomized controlled design.

  1. Optimal traffic control in highway transportation networks using linear programming

    KAUST Repository

    Li, Yanning

    2014-06-01

    This article presents a framework for the optimal control of boundary flows on transportation networks. The state of the system is modeled by a first order scalar conservation law (Lighthill-Whitham-Richards PDE). Based on an equivalent formulation of the Hamilton-Jacobi PDE, the problem of controlling the state of the system on a network link in a finite horizon can be posed as a Linear Program. Assuming all intersections in the network are controllable, we show that the optimization approach can be extended to an arbitrary transportation network, preserving linear constraints. Unlike previously investigated transportation network control schemes, this framework leverages the intrinsic properties of the Halmilton-Jacobi equation, and does not require any discretization or boolean variables on the link. Hence this framework is very computational efficient and provides the globally optimal solution. The feasibility of this framework is illustrated by an on-ramp metering control example.

  2. Programmable Logic Controller Modification Attacks for use in Detection Analysis

    Science.gov (United States)

    2014-03-27

    and J. Lowe, “The Myths and Facts Behind Cyber Security Risks for Industrial Control Systems ,” in Proceedings of the VDE Kongress, vol. 116, 2004. [13...Feb 2014 Date 20 Feb 2014 Date 20 Feb 2014 Date AFIT-ENG-14-M-66 Abstract Unprotected Supervisory Control and Data Acquisition (SCADA) systems offer...control and monitor physical industrial processes. Although attacks targeting SCADA systems have increased, there has been little work exploring the

  3. Tower Shielding Reactor II design and operation report. Vol. 3. Assembling and testing of the control mechanism assembly

    International Nuclear Information System (INIS)

    Ward, D.R.; Holland, L.B.

    1979-09-01

    The mechanisms that are operated to control the reactivity of the Tower Shielding Reactor II(TSR-II) are mounted on a Control Mechanism Housing (CMH) that is centered inside the reactor core. The information required to procure, fabricate, inspect, and assemble a CMH is contained in the ORNL engineering drawings listed in the appropriate sections. The components are fabricated and inspected from these drawings in accordance with a Quality Assurance Plan and a Manufacturing Plan. The material in this report describes the acceptance and performance tests of CMH subassemblies used ty the Tower Shielding Facility (TSF) staff but it can also be used by personnel fabricating the components. This information which was developed and used before the advent of the formalized QA Program and Manufacturing Plans evolved during the fabrication and testing of the first five CMHs

  4. The Gap between the Knowledge and Current Practices--A Case of Tobacco Control Programs in Croatia.

    Science.gov (United States)

    Civljak, Marta; Tudor Car, Lorainne; Skara, Silvana; Oresković, Stipe

    2015-09-01

    Despite the availability of numerous evidence-based smoking prevention and cessation programs, many countries are still not implementing these research-proven programs. The primary aim of this paper is to summarize the extent to which evidence-based smoking control programs have been implemented in Croatia over the last two decades. Data from the systematic reviews of the Cochrane Tobacco Addiction Group, which are readily available worldwide, were used as criteria to evaluate whether effective, evidence-based programs have been implemented in Croatia. According to our findings, the most effective behavioral and pharmacological smoking cessation interventions have thus far been underutilized in Croatia. In addition, some interventions that have been continuously implemented in Croatia--such as using self-help materials, school-based programs and the celebration of World No Tobacco Day--have only small, short-term beneficial effects according to the Cochrane reviews. However, Croatia is a party to the World health Organization Framework Convention on Tobacco Control and therefore has effective national legislation on tobacco control. Croatia should develop and implement programs that integrate the existing high-quality empirical evidence on the effectiveness of various behavioral, pharmacological, and social interventions for smoking prevention and cessation. This programming should become a part of a continuous national strategy, and should be implemented throughout all of Croatia.

  5. Bulletin of Animal Health and Production in Africa - Vol 66, No 1 (2018)

    African Journals Online (AJOL)

    AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search · USING ... Bulletin of Animal Health and Production in Africa - Vol 66, No 1 (2018) ... Performance and haematological parameters of growing rabbits fed different levels of ... Association of smallholder dairy farmers management and milking practices with ...

  6. Material protection control and accounting program activities at the Urals electrochemical integrated plant

    International Nuclear Information System (INIS)

    McAllister, S.

    1997-01-01

    The Urals Electrochemical Integrated Plant (UEIP) is the Russian Federation's largest uranium enrichment plant and one of three sites in Russia blending high enriched uranium (HEU) into commercial grade low enriched uranium. UEIP is located approximately 70 km north of Yekaterinburg in the closed city of Novouralsk (formerly Sverdlovsk- 44). DOE's MPC ampersand A program first met with UEIP in June of 1996, however because of some contractual issues the work did not start until September of 1997. The six national laboratories participating in DOE's Material Protection Control and Accounting program are cooperating with UEIP to enhance the capabilities of the physical protection, access control, and nuclear material control and accounting systems. The MPC ampersand A work at UEIP is expected to be completed during fiscal year 2001

  7. The Results of a Randomized Control Trial Evaluation of the SPARK Literacy Program

    Science.gov (United States)

    Jones, Curtis J.; Christian, Michael; Rice, Andrew

    2016-01-01

    The purpose of this report is to present the results of a two-year randomized control trial evaluation of the SPARK literacy program. SPARK is an early grade literacy program developed by Boys & Girls Clubs of Greater Milwaukee. In 2010, SPARK was awarded an Investing in Innovation (i3) Department of Education grant to further develop the…

  8. Decentralized Stackelberg Strategies for Interconnected Stochastic Dynamic Systems

    Science.gov (United States)

    1977-10-01

    Solutions" IM, Vol.8, No.6, p.413- 430, 1971. (42) Rhodes, I.B., and Luenberger, D.G., "Differential Games with Imperfect State Information", E Trans...34, Proc. Systems E for Power, ERDA Conf. Henniker, New Hampshire, 1975. [47) Starr, A.W., and Ho, Y.C., "Nonzero-Sum Differential Games ", Jt_., [ Vol.3, p...CONTROLLING OFFICE NAME AND ADDRESS 12. REPORT DATE October, 1977 Joint Services Electronics Program ,3. NUMSEROWPAGES 97 14. MONITORiNG &GENCY NAME 1

  9. Air-Breathing Hypersonic Vehicle Tracking Control Based on Adaptive Dynamic Programming.

    Science.gov (United States)

    Mu, Chaoxu; Ni, Zhen; Sun, Changyin; He, Haibo

    2017-03-01

    In this paper, we propose a data-driven supplementary control approach with adaptive learning capability for air-breathing hypersonic vehicle tracking control based on action-dependent heuristic dynamic programming (ADHDP). The control action is generated by the combination of sliding mode control (SMC) and the ADHDP controller to track the desired velocity and the desired altitude. In particular, the ADHDP controller observes the differences between the actual velocity/altitude and the desired velocity/altitude, and then provides a supplementary control action accordingly. The ADHDP controller does not rely on the accurate mathematical model function and is data driven. Meanwhile, it is capable to adjust its parameters online over time under various working conditions, which is very suitable for hypersonic vehicle system with parameter uncertainties and disturbances. We verify the adaptive supplementary control approach versus the traditional SMC in the cruising flight, and provide three simulation studies to illustrate the improved performance with the proposed approach.

  10. Availability of tobacco cessation services in substance use disorder treatment programs: Impact of state tobacco control policy.

    Science.gov (United States)

    Abraham, Amanda J; Bagwell-Adams, Grace; Jayawardhana, Jayani

    2017-08-01

    Given the high prevalence of smoking among substance use disorder (SUD) patients, the specialty SUD treatment system is an important target for adoption and implementation of tobacco cessation (TC) services. While research has addressed the impact of tobacco control on individual tobacco consumption, largely overlooked in the literature is the potential impact of state tobacco control policies on availability of services for tobacco cessation. This paper examines the association between state tobacco control policy and availability of TC services in SUD treatment programs in the United States. State tobacco control and state demographic data (n=51) were merged with treatment program data from the 2012 National Survey of Substance Abuse Treatment Services (n=10.413) to examine availability of TC screening, counseling and pharmacotherapy services in SUD treatment programs using multivariate logistic regression models clustered at the state-level. Approximately 60% of SUD treatment programs offered TC screening services, 41% offered TC counseling services and 26% offered TC pharmacotherapy services. Results of multivariate logistic regression showed the odds of offering TC services were greater for SUD treatment programs located in states with higher cigarette excise taxes and greater spending on tobacco prevention and control. Findings indicate cigarette excise taxes and recommended funding levels may be effective policy tools for increasing access to TC services in SUD treatment programs. Coupled with changes to insurance coverage for TC under the Affordable Care Act, state tobacco control policy tools may further reduce tobacco use in the United States. Published by Elsevier Ltd.

  11. Effectiveness of Comprehensive Tobacco Control Programs in Reducing Teenage Smoking: A Review

    OpenAIRE

    Wakefield, Melanie A PhD; Chaloupka, Frank J. PhD

    1999-01-01

    This review focuses on the extent to which comprehensive, statewide, tobacco control programs in the United States have induced change in teenage smoking or made progress towards this goal and under what circumstances such programs are likely to be most effective. The sources for this review include published journal articles, reports and documents, rather than any primary data analysis. We review evidence for the extent to which individual strategies that comprise a comprehensive tobacco con...

  12. A Recourse-Based Type-2 Fuzzy Programming Method for Water Pollution Control under Uncertainty

    Directory of Open Access Journals (Sweden)

    Jing Liu

    2017-11-01

    Full Text Available In this study, a recourse-based type-2 fuzzy programming (RTFP method is developed for supporting water pollution control of basin systems under uncertainty. The RTFP method incorporates type-2 fuzzy programming (TFP within a two-stage stochastic programming with recourse (TSP framework to handle uncertainties expressed as type-2 fuzzy sets (i.e., a fuzzy set in which the membership function is also fuzzy and probability distributions, as well as to reflect the trade-offs between conflicting economic benefits and penalties due to violated policies. The RTFP method is then applied to a real case of water pollution control in the Heshui River Basin (a rural area of China, where chemical oxygen demand (COD, total nitrogen (TN, total phosphorus (TP, and soil loss are selected as major indicators to identify the water pollution control strategies. Solutions of optimal production plans of economic activities under each probabilistic pollutant discharge allowance level and membership grades are obtained. The results are helpful for the authorities in exploring the trade-off between economic objective and pollutant discharge decision-making based on river water pollution control.

  13. The role of nutrition in integrated programs to control neglected tropical diseases

    Directory of Open Access Journals (Sweden)

    Hall Andrew

    2012-04-01

    Full Text Available Abstract There are strong and direct relationships between undernutrition and the disease caused by infectious organisms, including the diverse pathogens labeled as neglected tropical diseases (NTDs. Undernutrition increases the risk of infection, the severity of disease and the risk that children will die, while the physical damage, loss of appetite, and host responses during chronic infection can contribute substantially to undernutrition. These relationships are often synergistic. This opinion article examines the role of nutrition in controlling NTDs and makes the point that mass drug treatment - the major strategy currently proposed to control several diseases - is crucial to controlling disease and transmission, but is only the start of the process of physical recovery. Without adequate energy and nutrients to repair damaged tissues or recover lost growth and development, the benefits of treatment may not be evident quickly; the effects of control programs may be not appreciated by beneficiaries; while vulnerability to reinfection and disease may not be reduced. There is substantial potential for nutritional interventions to be added to large-scale programs to deliver drug treatments and thereby contribute, within a broad strategy of public health interventions and behavior change activities, to controlling and preventing NTDs in populations, and to restoring their health.

  14. 33 CFR Appendix C to Part 273 - Information Requirements for Aquatic Plant Control Program Environmental Impact Statements

    Science.gov (United States)

    2010-07-01

    ... Aquatic Plant Control Program Environmental Impact Statements C Appendix C to Part 273 Navigation and... Environmental Impact Statements 1. Description of the problem. a. Pests. Identify the pest to be controlled by.... Relationship to environmental situation. Non-target organisms and integrated pest management programs. 2...

  15. Windows Calorimeter Control (WinCal) program computer software design description

    International Nuclear Information System (INIS)

    Pertzborn, N.F.

    1997-01-01

    The Windows Calorimeter Control (WinCal) Program System Design Description contains a discussion of the design details for the WinCal product. Information in this document will assist a developer in maintaining the WinCal system. The content of this document follows the guidance in WHC-CM-3-10, Software Engineering Standards, Standard for Software User Documentation

  16. A multifunction editor for programming control sequences for a robot based radiopharmaceutical synthesis system

    International Nuclear Information System (INIS)

    Appelquist, G.; Bohm, C.

    1990-01-01

    A Multifunction Editor is a development tool for building control sequences for a robotized production system for positron emitting radiopharmaceuticals. This system consists of SCARA robot and a PC-AT personal computer as a controller together with general and synthesis specific chemistry equipment. The general equipment, which is common for many synthesis, is fixed to the wall of the hotcell, while the specific equipment, dedicated to the given synthesis, is located on a removable tray. The program recognizes commands to move the robot, to control valves and to control the computer screen. From within the editor it is possible to run the control sequence forward or backward to test it and to use the single step feature to debug. The editor commands include insert, replace and delete of commands in the sequence. When programming or editing robot movements the robot may be controlled by the mouse, from the keyboard or from a remote control box. The robot control sequence consists of a succession of stored robot positions. The screen control is used to display dynamic flowchart diagrams. This is achieved by displaying a modified picture on the screen whenever the system state has been changed significantly

  17. Retraction: On the origin of power-law distributions in systems with constrained phase space [Condens. Matter Phys., 2013, vol. 16, 43802

    Directory of Open Access Journals (Sweden)

    Editorial Board

    2014-03-01

    Full Text Available The article Condens. Matter Phys., 2013, vol. 16, 43802 ( DOI:10.5488/CMP.16.43802 has been retracted by the decision of the Editorial Board. There is a significant overlap with an article: Phys. Rev. E, 2006, vol. 74, 036120 ( DOI:10.1103/PhysRevE.74.036120. Appologies are offered to readers of the journal that this was not detected during the submission process.

  18. Challenges in setting up quality control in diagnostic radiology ...

    African Journals Online (AJOL)

    Journal Home > Vol 24, No 4 (2015) >. Log in or ... Quality control (QC) on diagnostic radiology equipment form part of the fundamental requirements for the ... Inadequate cooperation by facilities management, lack of QC equipment and insufficient staff form the major challenges in setting up QC in the facilities under study.

  19. Parametric synthesis of a robust controller on a base of mathematical programming method

    Science.gov (United States)

    Khozhaev, I. V.; Gayvoronskiy, S. A.; Ezangina, T. A.

    2018-05-01

    Considered paper is dedicated to deriving sufficient conditions, linking root indices of robust control quality with coefficients of interval characteristic polynomial, on the base of mathematical programming method. On the base of these conditions, a method of PI- and PID-controllers, providing aperiodic transient process with acceptable stability degree and, subsequently, acceptable setting time, synthesis was developed. The method was applied to a problem of synthesizing a controller for a depth control system of an unmanned underwater vehicle.

  20. The history and use of cancer registry data by public health cancer control programs in the United States.

    Science.gov (United States)

    White, Mary C; Babcock, Frances; Hayes, Nikki S; Mariotto, Angela B; Wong, Faye L; Kohler, Betsy A; Weir, Hannah K

    2017-12-15

    Because cancer registry data provide a census of cancer cases, registry data can be used to: 1) define and monitor cancer incidence at the local, state, and national levels; 2) investigate patterns of cancer treatment; and 3) evaluate the effectiveness of public health efforts to prevent cancer cases and improve cancer survival. The purpose of this article is to provide a broad overview of the history of cancer surveillance programs in the United States, and illustrate the expanding ways in which cancer surveillance data are being made available and contributing to cancer control programs. The article describes the building of the cancer registry infrastructure and the successful coordination of efforts among the 2 federal agencies that support cancer registry programs, the Centers for Disease Control and Prevention and the National Cancer Institute, and the North American Association of Central Cancer Registries. The major US cancer control programs also are described, including the National Comprehensive Cancer Control Program, the National Breast and Cervical Cancer Early Detection Program, and the Colorectal Cancer Control Program. This overview illustrates how cancer registry data can inform public health actions to reduce disparities in cancer outcomes and may be instructional for a variety of cancer control professionals in the United States and in other countries. Cancer 2017;123:4969-76. Published 2017. This article is a U.S. Government work and is in the public domain in the USA. Published 2017. This article is a U.S. Government work and is in the public domain in the USA.