Environmental Restoration Program Control Management System

International Nuclear Information System (INIS)

Duke, R.T.

1992-01-01

Environmental Restoration managers need to demonstrate that their programs are under control. Unlike most industrial programs, the public is heavily involved in Environmental Restoration activities. The public is demanding that the country prove that real progress is being made towards cleaning up the environment. A Program Control Management System can fill this need. It provides a structure for planning, work authorization, data accumulation, data analysis and change control. But it takes time to implement a control system and the public is losing its patience. This paper describes critical items essential to the quick development and implementation of a successful control system

Program Baseline Change Control Board charter

International Nuclear Information System (INIS)

1993-02-01

The purpose of this Charter is to establish the Program Baseline Change Control Board (PBCCB) for the Office of Civilian Radioactive Waste Management (OCRWM) Program, and to describe its organization, responsibilities, and basic methods of operation. Guidance for implementing this Charter is provided by the OCRWM Baseline Management Plan (BMP) and OCRWM Program Baseline Change Control Procedure

15 CFR 752.11 - Internal Control Programs.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Internal Control Programs. 752.11... COMPREHENSIVE LICENSE § 752.11 Internal Control Programs. (a) Scope—(1) Introduction. It is through Internal Control Programs (ICPs) that the SCL holder and the consignee assure that exports and reexports are not...

Installation of PMV Operation Program in DDC Controller and Air Conditioning Control Using PMV Directly as Set Point

Science.gov (United States)

Haramoto, Ken-Ichi

In general, air conditioning control in a building is operated mainly by indoor air temperature control. Although the operators of the machine in the building accepted a claim for indoor air temperature presented by the building inhabitants, the indoor conditions have been often too cool or warm. Therefore, in an attempt to create better thermal environments, the author paid attention to the PMV that is a thermal comfort index. And then, the possibility of air conditioning control using the PMV directly as the set point was verified by employing actual equipment in an air conditioning testing room and an office building. Prior to the execution of this control, the operation program of the PMV was installed in a DDC controller for the air conditioning control. And information from indoor sensors and so on was inputted to the controller, and the computed PMV was used as the feedback variable.

Computer program CDCID: an automated quality control program using CDC update

International Nuclear Information System (INIS)

Singer, G.L.; Aguilar, F.

1984-04-01

A computer program, CDCID, has been developed in coordination with a quality control program to provide a highly automated method of documenting changes to computer codes at EG and G Idaho, Inc. The method uses the standard CDC UPDATE program in such a manner that updates and their associated documentation are easily made and retrieved in various formats. The method allows each card image of a source program to point to the document which describes it, who created the card, and when it was created. The method described is applicable to the quality control of computer programs in general. The computer program described is executable only on CDC computing systems, but the program could be modified and applied to any computing system with an adequate updating program

Measurement control program at model facility

International Nuclear Information System (INIS)

Schneider, R.A.

1984-01-01

A measurement control program for the model plant is described. The discussion includes the technical basis for such a program, the application of measurement control principles to each measurement, and the use of special experiments to estimate measurement error parameters for difficult-to-measure materials. The discussion also describes the statistical aspects of the program, and the documentation procedures used to record, maintain, and process the basic data

Auditing measurement control programs

International Nuclear Information System (INIS)

Roberts, F.P.; Brouns, R.J.

1979-10-01

Requirements and a general procedure for auditing measurement control programs used in special nuclear material accounting are discussed. The areas of measurement control that need to be examined are discussed and a suggested checklist is included to assist in the preparation and performance of the audit

The Gap between the Knowledge and Current Practices--A Case of Tobacco Control Programs in Croatia.

Science.gov (United States)

Civljak, Marta; Tudor Car, Lorainne; Skara, Silvana; Oresković, Stipe

2015-09-01

Despite the availability of numerous evidence-based smoking prevention and cessation programs, many countries are still not implementing these research-proven programs. The primary aim of this paper is to summarize the extent to which evidence-based smoking control programs have been implemented in Croatia over the last two decades. Data from the systematic reviews of the Cochrane Tobacco Addiction Group, which are readily available worldwide, were used as criteria to evaluate whether effective, evidence-based programs have been implemented in Croatia. According to our findings, the most effective behavioral and pharmacological smoking cessation interventions have thus far been underutilized in Croatia. In addition, some interventions that have been continuously implemented in Croatia--such as using self-help materials, school-based programs and the celebration of World No Tobacco Day--have only small, short-term beneficial effects according to the Cochrane reviews. However, Croatia is a party to the World health Organization Framework Convention on Tobacco Control and therefore has effective national legislation on tobacco control. Croatia should develop and implement programs that integrate the existing high-quality empirical evidence on the effectiveness of various behavioral, pharmacological, and social interventions for smoking prevention and cessation. This programming should become a part of a continuous national strategy, and should be implemented throughout all of Croatia.

Environmental Restoration Program Management Control Plan

International Nuclear Information System (INIS)

1991-09-01

This Management Control Plan has been prepared to define the Energy Systems approach to managing its participation in the US DOE's Environmental Restoration (ER) Program in a manner consistent with DOE/ORO 931: Management Plan for the DOE Field Office, Oak Ridge, Decontamination and Decommissioning Program; and the Energy Systems Environmental Restoration Contract Management Plan (CMP). This plan discusses the systems, procedures, methodology, and controls to be used by the program management team to attain these objectives

An ALARA-conscious hot particle control program

International Nuclear Information System (INIS)

Doolittle, W.W.; Bredvad, R.S.; Bevelacqua, J.J.

1992-01-01

In 1989 approximately twenty-five percent of the radiation dose received by the Point Beach Nuclear Plant (PBNP) Health Physics group was due to its hot particle control program. The Health Physics group initiated a review of the program with the objective of decreasing the dose expenditure for hot particle control while maintaining a high standard for hot particle detection and control. In this paper the methods and results of this evaluation are described. The components of the hot particle control program, rules of thumb, and radionuclide composition at PBNP are presented

18 CFR 12.40 - Quality control programs.

Science.gov (United States)

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Quality control... PROJECT WORKS Other Responsibilities of Applicant or Licensee § 12.40 Quality control programs. (a... meeting any requirements or standards set by the Regional Engineer. If a quality control program is...

AEC controlled area safety program

Energy Technology Data Exchange (ETDEWEB)

Hendricks, D W [Nevada Operations Office, Atomic Energy Commission, Las Vegas, NV (United States)

1969-07-01

The detonation of underground nuclear explosives and the subsequent data recovery efforts require a comprehensive pre- and post-detonation safety program for workers within the controlled area. The general personnel monitoring and environmental surveillance program at the Nevada Test Site are presented. Some of the more unusual health-physics aspects involved in the operation of this program are also discussed. The application of experience gained at the Nevada Test Site is illustrated by description of the on-site operational and safety programs established for Project Gasbuggy. (author)

AEC controlled area safety program

International Nuclear Information System (INIS)

Hendricks, D.W.

1969-01-01

The detonation of underground nuclear explosives and the subsequent data recovery efforts require a comprehensive pre- and post-detonation safety program for workers within the controlled area. The general personnel monitoring and environmental surveillance program at the Nevada Test Site are presented. Some of the more unusual health-physics aspects involved in the operation of this program are also discussed. The application of experience gained at the Nevada Test Site is illustrated by description of the on-site operational and safety programs established for Project Gasbuggy. (author)

Radiological control technician: Training program management manual

International Nuclear Information System (INIS)

1992-10-01

This manual defines and describes the DOE Radiological Control Technician Core Training Program qualification and training process, material development requirements, standards and policies, and administration. The manual applies to Radiological Control Technician Training Programs at all DOE contractor sites

Automatic control of commercial computer programs

International Nuclear Information System (INIS)

Rezvov, B.A.; Artem'ev, A.N.; Maevskij, A.G.; Demkiv, A.A.; Kirillov, B.F.; Belyaev, A.D.; Artem'ev, N.A.

2010-01-01

The way of automatic control of commercial computer programs is presented. The developed connection of the EXAFS spectrometer automatic system (which is managed by PC for DOS) is taken with the commercial program for the CCD detector control (which is managed by PC for Windows). The described complex system is used for the automation of intermediate amplitude spectra processing in EXAFS spectrum measurements at Kurchatov SR source

A quality control program for radiation sources

International Nuclear Information System (INIS)

Almeida, C.E. de; Sibata, C.H.; Cecatti, E.R.; Kawakami, N.S.; Alexandre, A.C.; Chiavegatti Junior, M.

1982-01-01

An extensive quality control program was established covering the following areas: physical parameters of the therapeutical machines, dosimetric standards, preventive maintenance of radiation sources and measuring instruments. A critical evaluation of this program was done after two years (1977-1979) of routine application and the results will be presented. The fluctuation on physical parameters strongly supports the efforts and cost of a quality control program. This program has certainly improved the accuracy required on the delivery of the prescribed dose for radiotherapy treatment. (Author) [pt

DOE Radiological Control Manual Core Training Program

International Nuclear Information System (INIS)

Scott, H.L.; Maisler, J.

1993-01-01

Over the past year, the Department of Energy (DOE) Office of Health (EH-40) has taken a leading role in the development of new standardized radiological control training programs for use throughout the DOE complex. The Department promulgated its Radiological Control (RadCon) Manual in June 1992. To ensure consistent application of the criteria presented in the RadCon Manual, standardized radiological control core training courses and training materials have been developed for implementation at all DOE facilities. In producing local training programs, standardized core courses are to be supplemented with site-specific lesson plans, viewgraphs, student handbooks, qualification standards, question banks, and wallet-sized training certificates. Training programs for General Employee Radiological Training, Radiological Worker I and II Training, and Radiological Control Technician Training have been disseminated. Also, training committees under the direction of the Office of Health (EH-40) have been established for the development of additional core training courses, development of examination banks, and the update of the existing core training courses. This paper discusses the current activities and future direction of the DOE radiological control core training program

Schistosomiasis Sustained Control Program in Ethnic Groups Around Ninefescha (Eastern Senegal).

Science.gov (United States)

N'Diaye, Monique; Dioukhane, Elhadji M; Ndao, Babacar; Diedhiou, Kemo; Diawara, Lamine; Talla, Idrissa; Vernet, Charlotte; Bessin, François; Barbier, Dominique; Dewavrin, Patrick; Klotz, Francis; Georges, Pierre

2016-09-07

Schistosomiasis is the second most significant parasitic disease in children in several African countries. For this purpose, the "Programme National de Lutte contre les Bilharzioses" (PNLB) was developed in partnership with the World Health Organization (WHO) to control this disease in Senegal. However, geographic isolation of Bedik ethnic groups challenged implementation of the key elements of the schistosomiasis program in eastern Senegal, and therefore, a hospital was established in Ninefescha to improve access to health care as well as laboratory support for this population. The program we have implemented from 2008 in partnership with the PNLB/WHO involved campaigns to 1) evaluate schistosomiasis prevalence in children of 53 villages around Ninefescha hospital, 2) perform a mass drug administration following the protocol established by the PNLB in school-aged children, 3) monitor annual prevalence, 4) implement health education campaigns, and 5) oversee the building of latrines. This campaign led to a drop in schistosomiasis prevalence but highlighted that sustainable schistosomiasis control by praziquantel treatment, awareness of the use of latrines, and inhabitants' voluntary commitment to the program are crucial to improve Schistosoma elimination. Moreover, this study revealed that preschool-aged children, for whom praziquantel was not recommended until 2014 in Senegal, constituted a significant reservoir for the parasite. © The American Society of Tropical Medicine and Hygiene.

Sensitivity Analysis of Linear Programming and Quadratic Programming Algorithms for Control Allocation

Science.gov (United States)

Frost, Susan A.; Bodson, Marc; Acosta, Diana M.

2009-01-01

The Next Generation (NextGen) transport aircraft configurations being investigated as part of the NASA Aeronautics Subsonic Fixed Wing Project have more control surfaces, or control effectors, than existing transport aircraft configurations. Conventional flight control is achieved through two symmetric elevators, two antisymmetric ailerons, and a rudder. The five effectors, reduced to three command variables, produce moments along the three main axes of the aircraft and enable the pilot to control the attitude and flight path of the aircraft. The NextGen aircraft will have additional redundant control effectors to control the three moments, creating a situation where the aircraft is over-actuated and where a simple relationship does not exist anymore between the required effector deflections and the desired moments. NextGen flight controllers will incorporate control allocation algorithms to determine the optimal effector commands and attain the desired moments, taking into account the effector limits. Approaches to solving the problem using linear programming and quadratic programming algorithms have been proposed and tested. It is of great interest to understand their relative advantages and disadvantages and how design parameters may affect their properties. In this paper, we investigate the sensitivity of the effector commands with respect to the desired moments and show on some examples that the solutions provided using the l2 norm of quadratic programming are less sensitive than those using the l1 norm of linear programming.

Program Baseline Change Control Procedure

International Nuclear Information System (INIS)

1993-02-01

This procedure establishes the responsibilities and process for approving initial issues of and changes to the technical, cost, and schedule baselines, and selected management documents developed by the Office of Civilian Radioactive Waste Management (OCRWM) for the Civilian Radioactive Waste Management System. This procedure implements the OCRWM Baseline Management Plan and DOE Order 4700.1, Chg 1. It streamlines the change control process to enhance integration, accountability, and traceability of Level 0 and Level I decisions through standardized Baseline Change Proposal (BCP) forms to be used by the Level 0, 1, 2, and 3 Baseline Change Control Boards (BCCBs) and to be tracked in the OCRWM-wide Configuration Information System (CIS) Database.This procedure applies to all technical, cost, and schedule baselines controlled by the Energy System Acquisition Advisory Board (ESAAB) BCCB (Level 0) and, OCRWM Program Baseline Control Board (PBCCB) (Level 1). All baseline BCPs initiated by Level 2 or lower BCCBs, which require approval from ESAAB or PBCCB, shall be processed in accordance with this procedure. This procedure also applies to all Program-level management documents controlled by the OCRWM PBCCB

Guided Synthesis of Control Programs Using UPPAAL

DEFF Research Database (Denmark)

Hune, T.; Larsen, Kim Guldstrand; Pettersson, P.

2000-01-01

the transitions with extra guards. Applying this technique have made synthesis of control programs feasible for a plant producing as many as 60 batches. In comparison, we could only handle plants producing two batches without using guides. The synthesized control programs have been executed in a physical plant...

7 CFR 58.141 - Alternate quality control program.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Alternate quality control program. 58.141 Section 58... Service 1 Quality Specifications for Raw Milk § 58.141 Alternate quality control program. When a plant has in operation an acceptable quality program, at the producer level, which is approved by the...

Graphical programming: On-line robot simulation for telerobotic control

International Nuclear Information System (INIS)

McDonald, M.J.; Palmquist, R.D.

1993-01-01

Sandia has developed an advanced operational control system approach, caged Graphical Programming, to design and operate robotic waste cleanup and other hazardous duty robotic systems. The Graphical Programming approach produces robot systems that are faster to develop and use, safer in operation, and cheaper overall than altemative teleoperation or autonomous robot control systems. The Graphical Programming approach uses 3-D visualization and simulation software with intuitive operator interfaces for the programming and control of complex robotic systems. Graphical Programming Supervisor software modules allow an operator to command and simulate complex tasks in a graphic preview mode and, when acceptable, command the actual robots and monitor their motions with the graphic system. Graphical Progranuning Supervisors maintain registration with the real world and allow the robot to perform tasks that cannot be accurately represented with models alone by using a combination of model and sensor-based control. This paper describes the Graphical Programming approach, several example control systems that use Graphical Programming, and key features necessary for implementing successful Graphical Programming systems

Angra nuclear plant - environmental control program; Usina Nuclear de Angra: programa de controle ambiental

Energy Technology Data Exchange (ETDEWEB)

Kircher, E; Cruz, E.S. da [FURNAS, Rio de Janeiro, RJ (Brazil)

1990-12-31

The pre-operational studies, that were elaborated before the beginning of Angra I Power Plant operation, are described in particular the environmental radiological safety area till the fuel loading in the core reactor. Several aspects are included, as socio-economic survey, seismological analysis, Meteorological Program, marine biology, water cooling system, exposure measures of natural radiation, marine sediments characterization in the effluent dispersion area and Environmental Radiological Monitoring Program. The main environmental programs developed for the operational phase of the Angra I Plant are also presented, citing some considerations about the Meteorological Program, Marine Biology Control Program, Temperature and Chlorine Control in Piraquara de Fora Bay, Radiological Environmental Monitoring Program, Sanitary Effluent Control Program and Radiological Emergency Program. (C.G.C.). 2 refs.

Measurement control program for nuclear material accounting

International Nuclear Information System (INIS)

Brouns, R.J.; Roberts, F.P.; Merrill, J.A.; Brown, W.B.

1980-06-01

A measurement control program for nuclear material accounting monitors and controls the quality of the measurments of special nuclear material that are involved in material balances. The quality is monitored by collecting data from which the current precision and accuracy of measurements can be evaluated. The quality is controlled by evaluations, reviews, and other administrative measures for control of selection or design of facilities, equipment and measurement methods and the training and qualification of personnel who perform SNM measurements. This report describes the most important elements of a program by which management can monitor and control measurement quality

The advanced controls program at Oak Ridge National Laboratory

International Nuclear Information System (INIS)

Knee, H.E.; White, J.D.

1990-01-01

The Oak Ridge National Laboratory (ORNL), under sponsorship of the US Department of Energy (DOE), is conducting research that will lead to advanced, automated control of new liquid-metal-reactor (LMR) nuclear power plants. Although this program of research (entitled the ''Advanced Controls Program'') is focused on LMR technology, it will be capable of providing control design, test, and qualification capability for other advanced reactor designs (e.g., the advanced light water reactor [ALWR] and high temperature gas-cooled reactor [HTGR] designs), while also benefiting existing nuclear plants. The Program will also have applicability to complex, non-nuclear process control environments (e.g., petrochemical, aerospace, etc.). The Advanced Controls Program will support capabilities throughout the entire plant design life cycle, i.e., from the initial interactive first-principle dynamic model development for the process, systems, components, and instruments through advanced control room qualification. The current program involves five principal areas of research activities: (1) demonstrations of advanced control system designs, (2) development of an advanced controls design environment, (3) development of advanced control strategies, (4) research and development (R ampersand D) in human-system integration for advanced control system designs, and (5) testing and validation of advanced control system designs. Discussion of the research in these five areas forms the basis of this paper. Also included is a description of the research directions of the program. 8 refs

Measurement control program for new special recovery

International Nuclear Information System (INIS)

Hsue, S.T.; Campbell, K.; Barlich, G.

1987-04-01

This report summarizes the design of the measurement control (MC) program for the New Special Recovery facility. The MC program is divided into two levels. Level 1 MC checks are performed at the individual instrument computer and will always be functional even when the instrument-control computer is down. The level 1 MCs are divided into statistical checks for both bias and precision, and diagnostic checks. All the instruments are connected on line to an instrument-control computer to which the measurement results can be communicated. Level 2 MC analyses are performed at this computer. The analyses consist of control charts for bias and precision and statistical tests used as analytic supplements to the control charts. They provide the desired detection sensitivity and yet can be interpreted quickly and easily. Recommendations are also made in terms of the frequency of the tests, the standard used, and other operational aspects of the MC program. 16 refs., 11 figs., 10 tabs

Divison of Environmental Control Technology program, 1978

International Nuclear Information System (INIS)

1979-06-01

This report covers Division of Environmental Control Technology projects in progress during FY 1978, within the Office of the Assistant Secretary for Environment, Department of Energy. It is the second in a planned series of annual reports. The Division of Environmental Control Technology (ECT) continues to support the Assistant Secretary for Environment (EV) in discharging two primary responsibilities: (1) under the Environmental Engineering (EE) Program, the independent overview and assessment of environmental control aspects of both the U.S. Department of Energy's (DOE) research, development, and demonstration (RD and D) programs and the Nation's energy policies, and (2) under the Decontamination and Decommissioning Program, the reduction of potential environmental hazards at the radioactively contaminated sites that are presently owned or were formerly used by the Government. This report presents a short summary of objectives, approach, progress and results, future plans, and a reference bibliography for each research, development, or assessment project within the program areas described above

Divison of Environmental Control Technology program, 1978

Energy Technology Data Exchange (ETDEWEB)

Mott, William E.

1979-06-01

This report covers Division of Environmental Control Technology projects in progress during FY 1978, within the Office of the Assistant Secretary for Environment, Department of Energy. It is the second in a planned series of annual reports. The Division of Environmental Control Technology (ECT) continues to support the Assistant Secretary for Environment (EV) in discharging two primary responsibilities: (1) under the Environmental Engineering (EE) Program, the independent overview and assessment of environmental control aspects of both the U.S. Department of Energy's (DOE) research, development, and demonstration (RD and D) programs and the Nation's energy policies, and (2) under the Decontamination and Decommissioning Program, the reduction of potential environmental hazards at the radioactively contaminated sites that are presently owned or were formerly used by the Government. This report presents a short summary of objectives, approach, progress and results, future plans, and a reference bibliography for each research, development, or assessment project within the program areas described above.

Stochastic control theory dynamic programming principle

CERN Document Server

Nisio, Makiko

2015-01-01

This book offers a systematic introduction to the optimal stochastic control theory via the dynamic programming principle, which is a powerful tool to analyze control problems. First we consider completely observable control problems with finite horizons. Using a time discretization we construct a nonlinear semigroup related to the dynamic programming principle (DPP), whose generator provides the Hamilton–Jacobi–Bellman (HJB) equation, and we characterize the value function via the nonlinear semigroup, besides the viscosity solution theory. When we control not only the dynamics of a system but also the terminal time of its evolution, control-stopping problems arise. This problem is treated in the same frameworks, via the nonlinear semigroup. Its results are applicable to the American option price problem. Zero-sum two-player time-homogeneous stochastic differential games and viscosity solutions of the Isaacs equations arising from such games are studied via a nonlinear semigroup related to DPP (the min-ma...

Control of Angra 1' PZR by a fuzzy rule base build through genetic programming

International Nuclear Information System (INIS)

Caldas, Gustavo Henrique Flores; Schirru, Roberto

2002-01-01

There is an optimum pressure for the normal operation of nuclear power plant reactors and thresholds that must be respected during transients, what make the pressurizer an important control mechanism. Inside a pressurizer there are heaters and a shower. From their actuation levels, they control the vapor pressure inside the pressurizer and, consequently, inside the primary circuit. Therefore, the control of the pressurizer consists in controlling the actuation levels of the heaters and of the shower. In the present work this function is implemented through a fuzzy controller. Besides the efficient way of exerting control, this approach presents the possibility of extracting knowledge of how this control is been made. A fuzzy controller consists basically in an inference machine and a rule base, the later been constructed with specialized knowledge. In some circumstances, however, this knowledge is not accurate, and may lead to non-efficient results. With the development of artificial intelligence techniques, there wore found methods to substitute specialists, simulating its knowledge. Genetic programming is an evolutionary algorithm particularly efficient in manipulating rule base structures. In this work genetic programming was used as a substitute for the specialist. The goal is to test if an irrational object, a computer, is capable, by it self, to find out a rule base reproducing a pre-established actuation levels profile. The result is positive, with the discovery of a fuzzy rule base presenting an insignificant error. A remarkable result that proves the efficiency of the approach. (author)

Model-Checking Real-Time Control Programs

DEFF Research Database (Denmark)

Iversen, T. K.; Kristoffersen, K. J.; Larsen, Kim Guldstrand

2000-01-01

In this paper, we present a method for automatic verification of real-time control programs running on LEGO(R) RCX(TM) bricks using the verification tool UPPALL. The control programs, consisting of a number of tasks running concurrently, are automatically translated into the mixed automata model...... of UPPAAL. The fixed scheduling algorithm used by the LEGO(R) RCX(TM) processor is modeled in UPPALL, and supply of similar (sufficient) timed automata models for the environment allows analysis of the overall real-time system using the tools of UPPALL. To illustrate our technique for sorting LEGO(R) bricks...

IADC's well control accreditation program

International Nuclear Information System (INIS)

Kropla, S.M.

1997-01-01

WellCAP is a well control accreditation program devised and implemented by the International Association of Drilling Contractors (IADC). It is a worldwide comprehensive system that defines a well control training curriculum, establishes minimum standards and recommends guidelines for course structure. The program began in mid-1993 and is viewed as a means for training institutions to demonstrate industry recognition to customers, contractors and local governments. Schools can apply to have their courses accredited. The accreditation system is administered by a review panel. The application process requires that the school perform a detailed review of its curriculum and operations and bring them in line with the WellCAP curriculum and accreditation criteria. Currently, more than 75 schools around the world have requested application materials for WellCAP. To date fifteen schools have been fully accredited

Development and evaluation of a cancer-related fatigue patient education program: protocol of a randomized controlled trial

Directory of Open Access Journals (Sweden)

Görres Stefan

2008-07-01

Full Text Available Abstract Background Cancer-related fatigue (CRF and its impact on patients' quality of life has been an increasing subject of research. However, in Germany there is a lack of evidence-based interventions consistent with the multidimensional character of fatigue. The objective of this study is to develop and evaluate a self-management program for disease-free cancer patients to cope with CRF. Methods Based on evidence extracted from a literature review, a curriculum for the self-management program was elaborated. The curriculum was reviewed and validated by an interdisciplinary expert group and the training-modules will be pretested with a small number of participants and discussed in terms of feasibility and acceptance. To determine the efficacy of the program a randomised controlled trial will be carried out: 300 patients will be recruited from oncological practices in Bremen, Germany, and will be allocated to intervention or control group. The intervention group participates in the program, whereas the control group receives standard care and the opportunity to take part in the program after the end of the follow-up (waiting control group. Primary outcome measure is the level of fatigue, secondary outcome measures are quality of life, depression, anxiety, self-efficacy and physical activity. Data will be collected before randomisation, after intervention, and after a follow-up of 6 months. Discussion Because there are no comparable self-management programs for cancer survivors with fatigue, the development of the curriculum has been complex; therefore, the critical appraisal by the experts was an important step to validate the program and their contributions have been integrated into the curriculum. The experts appreciated the program as filling a gap in outpatient cancer care. If the results of the evaluation prove to be satisfactory, the outpatient care of cancer patients can be broadened and supplemented. Trial Registration Clinical

Programming Programmable Logic Controller. High-Technology Training Module.

Science.gov (United States)

Lipsky, Kevin

This training module on programming programmable logic controllers (PLC) is part of the memory structure and programming unit used in a packaging systems equipment control course. In the course, students assemble, install, maintain, and repair industrial machinery used in industry. The module contains description, objectives, content outline,…

Synthetic RNA Controllers for Programming Mammalian Cell Fate and Function

Science.gov (United States)

2015-11-04

Final report for “Synthetic RNA controllers for programming mammalian cell fate and function” Principal Investigator: Christina D. Smolke...SUBTITLE Synthetic RNA controllers for programming mammalian cell fate and function 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER...Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18   2 Synthetic RNA controllers for programming mammalian cell fate and function Task 1

Towards automatic verification of ladder logic programs

OpenAIRE

Zoubek , Bohumir; Roussel , Jean-Marc; Kwiatkowska , Martha

2003-01-01

International audience; Control system programs are usually validated by testing prior to their deployment. Unfortunately, testing is not exhaustive and therefore it is possible that a program which passed all the required tests still contains errors. In this paper we apply techniques of automatic verification to a control program written in ladder logic. A model is constructed mechanically from the ladder logic program and subjected to automatic verification against requirements that include...

Material control system simulator program reference manual

Energy Technology Data Exchange (ETDEWEB)

Hollstien, R.B.

1978-01-24

A description is presented of a Material Control System Simulator (MCSS) program for determination of material accounting uncertainty and system response to particular adversary action sequences that constitute plausible material diversion attempts. The program is intended for use in situations where randomness, uncertainty, or interaction of adversary actions and material control system components make it difficult to assess safeguards effectiveness against particular material diversion attempts. Although MCSS may be used independently in the design or analysis of material handling and processing systems, it has been tailored toward the determination of material accountability and the response of material control systems to adversary action sequences.

Material control system simulator program reference manual

International Nuclear Information System (INIS)

Hollstien, R.B.

1978-01-01

A description is presented of a Material Control System Simulator (MCSS) program for determination of material accounting uncertainty and system response to particular adversary action sequences that constitute plausible material diversion attempts. The program is intended for use in situations where randomness, uncertainty, or interaction of adversary actions and material control system components make it difficult to assess safeguards effectiveness against particular material diversion attempts. Although MCSS may be used independently in the design or analysis of material handling and processing systems, it has been tailored toward the determination of material accountability and the response of material control systems to adversary action sequences

Controlled thermonuclear reactions and Tora Supra program

International Nuclear Information System (INIS)

1988-01-01

The research programs for the nuclear energy production by means of thermonuclear fusion are shown. TORA SUPRA, Joint European Torus, Next European Torus and those developed at the Atomic Energy Center are described. The controlled fusion necessary conditions, the energy and confinement balance, and the research of a better tokamak configuration are discussed. A description of TORA SUPRA, the ways of achieving the project and the expected delays are shown. The Controlled Fusion Research Department functions, concerning these programs, are described. The importance of international cooperation and the perspectives about the use of controlled fusion are underlined [fr

Controlled thermonuclear research program

International Nuclear Information System (INIS)

Anon.

1976-01-01

The Plasma Physics and Controlled-Fusion Research Program at the Lawrence Berkeley Laboratory is divided into five projects: Plasma Production and Heating Experiments, Plasma Theory, Atomic Physics Studies, the Tormac Project, and Neutral-Beam Development and Technology listed in order of increasing magnitude, as regards manpower and budget. Some cross sections and yields are shown in atomic physics

Program, policy, and price interventions for tobacco control: quantifying the return on investment of a state tobacco control program.

Science.gov (United States)

Dilley, Julia A; Harris, Jeffrey R; Boysun, Michael J; Reid, Terry R

2012-02-01

We examined health effects associated with 3 tobacco control interventions in Washington State: a comprehensive state program, a state policy banning smoking in public places, and price increases. We used linear regression models to predict changes in smoking prevalence and specific tobacco-related health conditions associated with the interventions. We estimated dollars saved over 10 years (2000-2009) by the value of hospitalizations prevented, discounting for national trends. Smoking declines in the state exceeded declines in the nation. Of the interventions, the state program had the most consistent and largest effect on trends for heart disease, cerebrovascular disease, respiratory disease, and cancer. Over 10 years, implementation of the program was associated with prevention of nearly 36,000 hospitalizations, at a value of about $1.5 billion. The return on investment for the state program was more than $5 to $1. The combined program, policy, and price interventions resulted in reductions in smoking and related health effects, while saving money. Public health and other leaders should continue to invest in tobacco control, including comprehensive programs.

Monitoring control program as a tool for regulatory control

International Nuclear Information System (INIS)

Silva Peres, Sueli da; Lauria, Dejanaira C.; Martins, Nadia S.F.; Rio, Monica A.P.

2008-01-01

Full text: The Institute of Radiation Protection and Dosimetry (IRD) of the Brazilian Commission of Nuclear Energy (CNEN) is responsible for developing, establishing and carrying out an independent assessment to verify the adequacy, effectiveness and accuracy of environmental radiological control carried out by licensed and controlled facilities. This independent assessment is performed by Environmental Monitoring Control Program (MCP). The MCP is a regulatory control and its main goal is to provide public and environment with an appropriate protection level against harmful effects of ionising radiation. The main purpose of the MCP is to verify whether applicable requirements prescribed by legislation are met, the environmental radiological control of the facilities are adequate and effective and the facilities are able to generate valid measuring results. The MCP is carried out in order to evaluate the quality of environmental radiation monitoring programs (EMP) and the effectiveness of their implementation, sampling conditions in the field, changes of environmental aspects in the impact area, adequacy of and adherence to procedures established and other applicable documents, technical competence of the staff and the necessary resources to ensure the required quality of the EMP. The MCP has been performed by activities should include inspecting and auditing of several types of nuclear and radioactive facilities. The inspection programme include the joint sampling program (CCP). The aim of the CCP is to check data of environmental monitoring of operator. The MCP was implemented in 1994. Ever since several problems related to the environmental control performed by operator was identified. The most important of them include problems related to the preparation and analysis of environmental samples, training of personnel, necessary resources, adherence of procedures to the purpose of the monitoring, fulfillment of procedures established, adequacy of the EMP and EMP

Cost-Effectiveness of a Model Infection Control Program for Preventing Multi-Drug-Resistant Organism Infections in Critically Ill Surgical Patients.

Science.gov (United States)

Jayaraman, Sudha P; Jiang, Yushan; Resch, Stephen; Askari, Reza; Klompas, Michael

2016-10-01

Interventions to contain two multi-drug-resistant Acinetobacter (MDRA) outbreaks reduced the incidence of multi-drug-resistant (MDR) organisms, specifically methicillin-resistant Staphylococcus aureus, vancomycin-resistant Enterococcus, and Clostridium difficile in the general surgery intensive care unit (ICU) of our hospital. We therefore conducted a cost-effective analysis of a proactive model infection-control program to reduce transmission of MDR organisms based on the practices used to control the MDRA outbreak. We created a model of a proactive infection control program based on the 2011 MDRA outbreak response. We built a decision analysis model and performed univariable and probabilistic sensitivity analyses to evaluate the cost-effectiveness of the proposed program compared with standard infection control practices to reduce transmission of these MDR organisms. The cost of a proactive infection control program would be $68,509 per year. The incremental cost-effectiveness ratio (ICER) was calculated to be $3,804 per aversion of transmission of MDR organisms in a one-year period compared with standard infection control. On the basis of probabilistic sensitivity analysis, a willingness-to-pay (WTP) threshold of $14,000 per transmission averted would have a 42% probability of being cost-effective, rising to 100% at $22,000 per transmission averted. This analysis gives an estimated ICER for implementing a proactive program to prevent transmission of MDR organisms in the general surgery ICU. To better understand the causal relations between the critical steps in the program and the rate reductions, a randomized study of a package of interventions to prevent healthcare-associated infections should be considered.

Regulatory quality control in the metal and semi metal environmental monitoring program at IPEN/CNEN-SP

International Nuclear Information System (INIS)

Faustino, Mainara G.; Silva, Doulgas Batista; Monteiro, Lucilena R.; Dantas, Elizabeth S.K.; Pires, Maria Aparecida F.; Cotrim, Marycel E.B.

2013-01-01

The CONAMA's Resolution 430 recently published in May 13 th of 2011, that completes and modifies the Resolution 357/2005, defined new quality standards to perform liquid effluent monitoring essays in order to allow the release in the public sewer system. This Resolution has established that the essay laboratories must be certified by Brazilian National Metrology, Normalization and Industrial Quality Institute - INMETRO and also count with an implemented quality control system. Thereby this publication affected directly IPEN's Environmental Monitoring Program of Stables Chemical Compound (PMA-Q), performed since 2007. In this program, 20 parameters related to the metallic and non-metallic chemical elements content are monitored by using sensitive analytical techniques such as graphite furnace atomic absorption spectrometry - GF-AAS or inductively coupled plasma spectrometry - ICP-OES. Therefore this paper presents improvements to determine the laboratory individual performance performed by GF-AAS and ICP-OES. To achieve the legislation compliance for these parameters, the following actions were implemented: the construction of control charts (internal quality control) and the participation of the laboratory in interlaboratory proficiency tests (external quality control). These actions are presented and discussed with the results of elements such as Arsenic and Lead that are analyzed through GF-AAS as well as Chromium, Cooper, Zinc, Iron and Nickel, that are analyzed through ICP-OES. These actions of quality control allowed the continuous monitoring of laboratory performance, the identification and resolution of analytic problems and interlaboratory differences, provide additional confidence to monitoring program. (author)

Completion report : Effect of Comprehensive Yogic Breathing program on type 2 diabetes: A randomized control trial

Directory of Open Access Journals (Sweden)

V P Jyotsna

2014-01-01

Full Text Available Background: Yoga has been shown to be benefi cial in diabetes in many studies, though randomized control trials are few. The aim of this randomized control trial was to see the effect of Sudarshan Kriya and related practices (comprehensive yogic breathing program on quality of life, glycemic control, and cardiac autonomic functions in diabetes. Diabetes mellitus is a risk factor for sudden cardiac death. Cardiac autonomic neuropathy has been implicated in the causation of sudden cardiac death. Therefore, a maneuver to prevent progression of cardiac autonomic neuropathy holds signifi cance. Materials and Methods: A total of 120 patients of diabetes on oral medication and diet and exercise advice were randomized into two groups: (1 Continued to receive standard treatment for diabetes. (2 Patients administered comprehensive yogic breathing program and monitored to regularly practice yoga in addition to standard treatment of diabetes. At 6 months, quality of life and postprandial plasma glucose signifi cantly improved in the group practicing yoga compared to baseline, but there was no significant improvement in the fasting plasma glucose and glycated hemoglobin. Results: On per protocol analysis, sympathetic cardiac autonomic functions signifi cantly improved from baseline in the group practicing comprehensive yogic breathing. Conclusion: This randomized control trial points towards the beneficial effect of yogic breathing program in preventing progression of cardiac neuropathy. This has important implications as cardiac autonomic neuropathy has been considered as one of the factors for sudden cardiac deaths.Keywords: comprehensive yogic breathing program, diabetes mellitus, cardiac autonomic function

[Resource allocation analysis for international cooperation program for HIV/AIDS prevention and control].

Science.gov (United States)

Li, Hui; Xue, Hui; Liu, Hui; Guo, Hao-yan; Zhang, Hua; Sun, Jiang-ping

2008-12-01

investment in surveillance and testing, advocacy education and intervention, care and support, and others were 22.4%, 19.7%, 36.8% and 21.1% respectively in 2005, and for international cooperation program were 11.5%, 20.8%, 10.4% and 57.4%. For national investment in 2006 were 18.6%, 23.8%, 32.6% and 25.0%, and international cooperation program were 14.0%, 34.3%, 17.1% and 34.6% respectively. The Chinese government and international programs therefore had different priorities in 2005 (chi(2) = 35.09, P International HIV/AIDS cooperation programs should be better integrated with national programs and combined with epidemic situation and GDP to decide the amount and areas of the investment in order to ensure that they supplement Chinese HIV/AIDS prevention and control activities effectively. The advantages that can be gained from technical support provided by international programs should be further emphasized in line with China's HIV/AIDS prevention and control priorities.

Control system design and analysis using the INteractive Controls Analysis (INCA) program

Science.gov (United States)

Bauer, Frank H.; Downing, John P.

1987-01-01

The INteractive Controls Analysis (INCA) program was developed at the Goddard Space Flight Center to provide a user friendly efficient environment for the design and analysis of linear control systems. Since its inception, INCA has found extensive use in the design, development, and analysis of control systems for spacecraft, instruments, robotics, and pointing systems. Moreover, the results of the analytic tools imbedded in INCA have been flight proven with at least three currently orbiting spacecraft. This paper describes the INCA program and illustrates, using a flight proven example, how the package can perform complex design analyses with relative ease.

Theoretical and algorithmic advances in multi-parametric programming and control

KAUST Repository

Pistikopoulos, Efstratios N.; Dominguez, Luis; Panos, Christos; Kouramas, Konstantinos; Chinchuluun, Altannar

2012-01-01

This paper presents an overview of recent theoretical and algorithmic advances, and applications in the areas of multi-parametric programming and explicit/multi-parametric model predictive control (mp-MPC). In multi-parametric programming, advances include areas such as nonlinear multi-parametric programming (mp-NLP), bi-level programming, dynamic programming and global optimization for multi-parametric mixed-integer linear programming problems (mp-MILPs). In multi-parametric/explicit MPC (mp-MPC), advances include areas such as robust multi-parametric control, multi-parametric nonlinear MPC (mp-NMPC) and model reduction in mp-MPC. A comprehensive framework for multi-parametric programming and control is also presented. Recent applications include a hydrogen storage device, a fuel cell power generation system, an unmanned autonomous vehicle (UAV) and a hybrid pressure swing adsorption (PSA) system. © 2012 Springer-Verlag.

Theoretical and algorithmic advances in multi-parametric programming and control

KAUST Repository

Pistikopoulos, Efstratios N.

2012-04-21

This paper presents an overview of recent theoretical and algorithmic advances, and applications in the areas of multi-parametric programming and explicit/multi-parametric model predictive control (mp-MPC). In multi-parametric programming, advances include areas such as nonlinear multi-parametric programming (mp-NLP), bi-level programming, dynamic programming and global optimization for multi-parametric mixed-integer linear programming problems (mp-MILPs). In multi-parametric/explicit MPC (mp-MPC), advances include areas such as robust multi-parametric control, multi-parametric nonlinear MPC (mp-NMPC) and model reduction in mp-MPC. A comprehensive framework for multi-parametric programming and control is also presented. Recent applications include a hydrogen storage device, a fuel cell power generation system, an unmanned autonomous vehicle (UAV) and a hybrid pressure swing adsorption (PSA) system. © 2012 Springer-Verlag.

Intelligent Flight Control Simulation Research Program

National Research Council Canada - National Science Library

Stolarik, Brian

2007-01-01

...). Under the program, entitled "Intelligent Flight Control Simulation Research Laboratory," a variety of technologies were investigated or developed during the course of the research for AFRL/VAC...

Object oriented programming interfaces for accelerator control

International Nuclear Information System (INIS)

Hoff, L.T.

1997-01-01

Several years ago, the AGS controls group was given the task of developing software for the RHIC accelerator. Like the AGS, the RHIC control system needs to control and monitor equipment distributed around a relatively large geographic area. A local area network connects this equipment to a collection of UNIX workstations in a central control room. Similar software had been developed for the AGS about a decade earlier, but isn't well suited for RHIC use for a number of reasons. Rather than adapt the AGS software for RHIC use, the controls group opted to start with a clean slate. To develop software that would address the shortcomings of the AGS software, while preserving the useful features that evolved through years of use. A current trend in control system design is to provide an object oriented programming interface for application developers. This talk will discuss important aspects and features of object oriented application programming interfaces (APIs) for accelerator control systems, and explore why such interfaces are becoming the norm

Salmonella Control Programs in Denmark

DEFF Research Database (Denmark)

Wegener, Henrik Caspar; Hald, Tine; Wong, Danilo Lo Fo

2003-01-01

We describe Salmonella control programs of broiler chickens, layer hens, and pigs in Denmark. Major reductions in the incidence of foodborne human salmonellosis have occurred by integrated control of farms and food processing plants. Disease control has been achieved by monitoring the herds...... and flocks, eliminating infected animals, and diversifying animals (animals and products are processed differently depending on Salmonella status) and animal food products according to the determined risk. In 2001, the Danish society saved U.S.$25.5 million by controlling Salmonella. The total annual...... Salmonella control costs in year 2001 were U.S.$14.1 million (U.S.$0.075/kg of pork and U.S.$0.02/kg of broiler or egg). These costs are paid almost exclusively by the industry. The control principles described are applicable to most industrialized countries with modern intensive farming systems....

Scheduling and control of programs in the CICADA computer system for TFTR

International Nuclear Information System (INIS)

Christianson, G.B.; Sherrick, M.; Stark, W.

1983-01-01

The CICADA computer system is a network of super minicomputers for data acquisition, reduction, display and device control on the TFTR experiment. Human interaction with the CICADA system is accomplished by consoles offering color displays with a high degree of operator interaction with the computer system, and by interactive terminals offering a limited degree of operator interaction. The authors describe the software packages and data bases used to control the consoles and provide communication to an application program attached to a console. The console control program in its turn schedules the execution of control programs that furnish operating system interfaces to applications programs executing at a console or terminal (in response to human activation), or upon activation by scheduling tasks. The control programs handle functions such as applications task activation. They discuss the implementation of the control programs in the multi-computer CICADA environment, and describe the control program data bases. In a TFTR shot cycle, applications programs must be scheduled for activation at operator-defined stages, in order to accomplish the arming of hardware devices, acquisition of summary waveform data, and the acquisition and archiving of raw data. The authors describe the software tasks and data bases of the CICADA event system, which accomplishes this scheduling of applications task activation in conjunction with the control programs. Future enhancements planned for the console control, program control, and event systems are outlined

Effectiveness of the tailored EBP training program for Filipino physiotherapists: a randomised controlled trial.

Science.gov (United States)

Dizon, Janine Margarita; Grimmer-Somers, Karen; Kumar, Saravana

2011-04-13

Evidence implementation continues to challenge health professionals most especially those from developing countries. Filipino physiotherapists represent a group of health professionals in a developing country who by tradition and historical practice, take direction from a doctor, on treatment options. Lack of autonomy in decision-making challenges their capacity to deliver evidence-based care. However, this scenario should not limit them from updating and up-skilling themselves on evidence- based practice (EBP). EBP training tailored to their needs and practice was developed to address this gap. This study will be conducted to assess the effectiveness of a tailored EBP-training program for Filipino physiotherapists, in improving knowledge, skills, attitudes and behaviour to EBP. Participation in this program aims to improve capacity to EBP and engage with referring doctors to determine the most effective treatments for their patients. A double blind randomised controlled trial, assessing the effectiveness of the EBP training intervention, compared with a waitlist control, will be conducted. An adequately powered sample of 54 physiotherapists from the Philippines will be recruited and randomly allocated to EBP intervention or waitlist control. The EBP program for Filipino physiotherapists is a one-day program on EBP principles and techniques, delivered using effective adult education strategies. It consists of lectures and practical workshops. A novel component in this program is the specially-developed recommendation form, which participants can use after completing their training, to assist them to negotiate with referring doctors regarding evidence-based treatment choices for their patients.Pre and post measures of EBP knowledge, skills and attitudes will be assessed in both groups using the Adapted Fresno Test and the Questions to EBP attitudes. Behaviour to EBP will be measured using activity diaries for a period of three months. Should the EBP-training program

HEALS Hypertension Control Program: Training Church Members as Program Leaders.

Science.gov (United States)

Dodani, Sunita; Beayler, Irmatine; Lewis, Jennifer; Sowders, Lindsey A

2014-01-01

Health disparities related to cardiovascular diseases (CVDs) including stroke have remained higher in the African-Americans (AAs) than in other populations. HEALS is a faith-based hypertension (HTN) control program modified according to AA community needs, and delivered by the church-lay members called church health advisors (CHAs). This study examined the feasibility and acceptability of training CHAs as HEALS program leaders. Four CHAs completed a 10-hour HEALS program training workshop at the Church, conducted by the nutrition experts. Workshop was evaluated by CHAs on their level of satisfaction, clarity of contents covered and comfort in delivery the program to the church congregation. The overall six main HEALS curriculum components were completed. Workshop was highly evaluated by CHAs on length of training, balance between content and skills development, and level of satisfaction with program delivery. Church-based culturally modified health promotion interventions conducted by the community lay members may be a way to reduce health disparities in ethnic minorities.

Performance expectations of measurement control programs

International Nuclear Information System (INIS)

Hammond, G.A.

1985-01-01

The principal index for designing and assessing the effectiveness of safeguards is the sensitivity and reliability of gauging the true status of material balances involving material flows, transfers, inventories, and process holdup. The measurement system must not only be capable of characterizing the material for gradation or intensity of protection, but also be responsive to needs for detection and localization of losses, provide confirmation that no diversion has occurred, and help meet requirements for process control, health and safety. Consequently, the judicious application of a measurement control and quality assurance program is vital to a complete understanding of the capabilities and limitations of the measurement system including systematic and random components of error for weight, volume, sampling, chemical, isotopic, and nondestructive determinations of material quantities in each material balance area. This paper describes performance expectations or criteria for a measurement control program in terms of ''what'' is desired and ''why'', relative to safeguards and security objectives

Randomized controlled trial of a healthy brain ageing cognitive training program: effects on memory, mood, and sleep.

Science.gov (United States)

Diamond, Keri; Mowszowski, Loren; Cockayne, Nicole; Norrie, Louisa; Paradise, Matthew; Hermens, Daniel F; Lewis, Simon J G; Hickie, Ian B; Naismith, Sharon L

2015-01-01

With the rise in the ageing population and absence of a cure for dementia, cost-effective prevention strategies for those 'at risk' of dementia including those with depression and/or mild cognitive impairment are urgently required. This study evaluated the efficacy of a multifaceted Healthy Brain Ageing Cognitive Training (HBA-CT) program for older adults 'at risk' of dementia. Using a single-blinded design, 64 participants (mean age = 66.5 years, SD = 8.6) were randomized to an immediate treatment (HBA-CT) or treatment-as-usual control arm. The HBA-CT intervention was conducted twice-weekly for seven weeks and comprised group-based psychoeducation about cognitive strategies and modifiable lifestyle factors pertaining to healthy brain ageing, and computerized cognitive training. In comparison to the treatment-as-usual control arm, the HBA-CT program was associated with improvements in verbal memory (p = 0.03), self-reported memory (p = 0.03), mood (p = 0.01), and sleep (p = 0.01). While the improvements in memory (p = 0.03) and sleep (p = 0.02) remained after controlling for improvements in mood, only a trend in verbal memory improvement was apparent after controlling for sleep. The HBA-CT program improves cognitive, mood, and sleep functions in older adults 'at risk' of dementia, and therefore offers promise as a secondary prevention strategy.

Status of selected air pollution control programs, February 1992

International Nuclear Information System (INIS)

1992-02-01

The collection of status reports has been prepared in order to provide a timely summary of selected EPA air pollution control activities to those individuals who are involved with the implementation of these programs. The report contains ozone/carbon monoxide (CO) programs; mobile sources programs; particulate matter nominally 10M and less (PM-10), sulfur dioxide (SO2) and lead programs; New Source Review (NSR); economics programs; emission standards programs; Indian activity programs; mobile sources programs; air toxics programs; acid rain programs; permits programs; chlorofluorocarbons programs; enforcement programs; and other programs

A Performance Management Initiative for Local Health Department Vector Control Programs.

Science.gov (United States)

Gerding, Justin; Kirshy, Micaela; Moran, John W; Bialek, Ron; Lamers, Vanessa; Sarisky, John

2016-01-01

Local health department (LHD) vector control programs have experienced reductions in funding and capacity. Acknowledging this situation and its potential effect on the ability to respond to vector-borne diseases, the U.S. Centers for Disease Control and Prevention and the Public Health Foundation partnered on a performance management initiative for LHD vector control programs. The initiative involved 14 programs that conducted a performance assessment using the Environmental Public Health Performance Standards. The programs, assisted by quality improvement (QI) experts, used the assessment results to prioritize improvement areas that were addressed with QI projects intended to increase effectiveness and efficiency in the delivery of services such as responding to mosquito complaints and educating the public about vector-borne disease prevention. This article describes the initiative as a process LHD vector control programs may adapt to meet their performance management needs. This study also reviews aggregate performance assessment results and QI projects, which may reveal common aspects of LHD vector control program performance and priority improvement areas. LHD vector control programs interested in performance assessment and improvement may benefit from engaging in an approach similar to this performance management initiative.

Applied Research of Enterprise Cost Control Based on Linear Programming

Directory of Open Access Journals (Sweden)

Yu Shuo

2015-01-01

This paper researches the enterprise cost control through the linear programming model, and analyzes the restriction factors of the labor of enterprise production, raw materials, processing equipment, sales price, and other factors affecting the enterprise income, so as to obtain an enterprise cost control model based on the linear programming. This model can calculate rational production mode in the case of limited resources, and acquire optimal enterprise income. The production guiding program and scheduling arrangement of the enterprise can be obtained through calculation results, so as to provide scientific and effective guidance for the enterprise production. This paper adds the sensitivity analysis in the linear programming model, so as to learn about the stability of the enterprise cost control model based on linear programming through the sensitivity analysis, and verify the rationality of the model, and indicate the direction for the enterprise cost control. The calculation results of the model can provide a certain reference for the enterprise planning in the market economy environment, which have strong reference and practical significance in terms of the enterprise cost control.

Effluent controls and environmental monitoring programs for uranium milling operations

International Nuclear Information System (INIS)

Maixner, R.D.

1979-01-01

Controls will reduce gaseous, particulate, and liquid discharges. Monitoring programs are used to determine effectiveness. The controls and programs discussed are used at Cotter Corporation's Canon City Mill in Colorado. 3 refs

Economics of area-wide sit control programs

International Nuclear Information System (INIS)

Enkerlin, Walther

2003-01-01

The economic feasibility of using the sterile insect technique (SIT) to control certain key insect pests has been demonstrated clearly. The successful implementation of a number of area-wide and large-scale SIT programs has produced substantial economic benefits for the beneficiaries of the technology. The economic advantages of this technology will become more evident as indirect benefits of SIT application are incorporated into total program benefit estimates. Awareness of the technical and economic advantages of the SIT, and market forces favoring the use of environmentally clean pest control methods, will encourage private investment in this technology. (author)

Control and evaluation programs for TANSY-KM5

International Nuclear Information System (INIS)

Grosshoeg, G.; Aronsson, D.; Hoek, M.; Rydz, R.; Norberg, L.; Urholm, L.

1991-01-01

Our first task was to purchase a computer and to create a basic software library for the preliminary test of the components. Our choice was a Starburst system from CES. The computer was a PDP-11/70 on a chip. It is the same computer as the ones used by the auxiliary CAMAC crate controllers in the TANSY system. However, the host has a 256 kbyte memory instead of the 64 kbyte memory used in the crate controllers. The operation system is RSX11-M. It is a real time system with properties suitable for laboratory works. However, the computer works in 64 kbyte partitions which limits the size of the programs. Four program systems were written. The two first were one-parameter systems for amplitude and time measurements using the ADCs and TDCs which later should be included in the TANSY system. These systems were supplemented with two two-parameter systems, one for time and amplitude measurements and one for time measurements on 16 detectors simultaneously. The display capabilities of these program systems have been used extensively by the TANSY programs. The programs needed for the manipulation of the system give the user a possibility to manually run the system without any intervention from the normal CODAS control system. The programs have been used for calibration measurements as well as test of the TANSY system. The evaluation programs use the output file from a normal measurement. The data file may be tested for errors. The true events can be sorted into different configurations. The final one is the neutron energy sort program, which gives the neutron energy distribution

A stochastic programming approach to manufacturing flow control

OpenAIRE

Haurie, Alain; Moresino, Francesco

2012-01-01

This paper proposes and tests an approximation of the solution of a class of piecewise deterministic control problems, typically used in the modeling of manufacturing flow processes. This approximation uses a stochastic programming approach on a suitably discretized and sampled system. The method proceeds through two stages: (i) the Hamilton-Jacobi-Bellman (HJB) dynamic programming equations for the finite horizon continuous time stochastic control problem are discretized over a set of sample...

Tank waste remediation system heat stress control program report, 1995

International Nuclear Information System (INIS)

Carls, D.R.

1995-01-01

Protecting employees from heat stress within tank farms during the summer months is challenging. Work constraints typically experienced in tank farms complicate the measures taken to protect employees from heat stress. TWRS-Industrial Hygiene (IH) has endeavored to control heat stress injuries by anticipating, recognizing, evaluating and controlling the factors which lead or contribute to heat stress in Tank Farms. The TWRS Heat Stress Control Program covers such areas as: employee and PIC training, communication of daily heat stress alerts to tank farm personnel, setting work/rest regimens, and the use of engineering and personal protective controls when applicable. The program has increased worker awareness of heat stress and prevention, established provisions for worker rest periods, increased drinking water availability to help ensure worker hydration, and allowed for the increased use of other protective controls to combat heat stress. The TWRS Heat Stress Control Program is the cornerstone for controlling heat stress among tank farm employees. The program has made great strides since it's inception during the summer of 1994. Some improvements can still be made to enhance the program for the summer of 1996, such as: (1) procurement and use of personal heat stress monitoring equipment to ensure appropriate application of administrative controls, (2) decrease the need for use of containment tents and anti-contamination clothing, and (3) providing a wider variety of engineering and personal protective controls for heat stress prevention

A method of numerically controlled machine part programming

Science.gov (United States)

1970-01-01

Computer program is designed for automatically programmed tools. Preprocessor computes desired tool path and postprocessor computes actual commands causing machine tool to follow specific path. It is used on a Cincinnati ATC-430 numerically controlled machine tool.

Status of Pantex Plant Waste Management Project/program control system

International Nuclear Information System (INIS)

Price, Wesley J.; Matthews, William L.

1992-01-01

During a December 1990 Waste Management Program Review held in Albuquerque, New Mexico, the Waste Management and Operational Surety Division (WMOSD) introduced the project control system to be used for the Waste Management (WM) Operations Program. The system was entitled 'TRAC-WM' (Tracking and Control for Waste Management). The stated objective for this system was to establish a frame work for planning, managing, and controlling work within the WM program. As a result Mason and Hanger (the operating contractor at the Pantex Plant) initiated the development of a computerized waste management project tracking system. (author)

Nuclear materials control and accountability internal audit program

International Nuclear Information System (INIS)

Barham, M.A.; Abbott, R.R.

1991-01-01

This paper reports that the Department of Energy Order (DOE) 5633.3, Control and Accountability for Nuclear Materials, includes several requirements for development and implementation of an internal audit program. Martin Marietta Energy System, Inc., manages five sites in Tennessee, Kentucky, and Ohio for the DOE Field Office, Oak Ridge and has a Central Nuclear Materials Control and Accountability (NMC and A) Manager with matrixed responsibility for the NMC and A program at the five sites. The Energy Systems Central NMC and A Manager has developed an NMC and A Internal Audit Handbook which defines the functional responsibilities, performance criteria, and reporting and documentation requirements for the Energy Systems NMC and A Internal Audit Program. The initial work to develop and implement these standards was tested at the K-25 Site when the site hired an internal auditor to meet the DOE requirements for an NMC and A Internal Audit program

Development of a computer program for drop time and impact velocity of the rod cluster control assembly

International Nuclear Information System (INIS)

Choi, K.-S.; Yim, J.-S.; Kim, I.-K.; Kim, K.-T.

1993-01-01

In PWR the rod cluster control assembly (RCCA) for shutdown is released upon the action of the control drive mechanism and falls down through the guide thimble by its weight. Drop time and impact velocity of the RCCA are two key parameters with respect to reactivity insertion time and the mechanical integrity of fuel assembly. Therefore, the precise control of the drop time and impact velocity is prerequisite to modifying the existing design features of the RCCA and guide thimble or newly designing them. During its falling down into the core, the RCCA is retarded by various forces acting on it such as flow resistance and friction caused by the RCCA movement, buoyancy mechanical friction caused by contacting inner surface of the guide thimble, etc. However, complicated coupling of the various forces makes it difficult to derive an analytical dynamic equation for the drop time and impact velocity. This paper deals with the development of a computer program containing an analytical dynamic equation applicable to the Korean Fuel Assembly (KOFA) loaded in the Korean nuclear power plants. The computer program is benchmarked with an available single control rod drop tests. Since the predicted values are in good agreements with the test results, the computer program developed in this paper can be employed to modify the existing design features of the RCCA and guide thimble and to develop their new design features for advanced nuclear reactors. (author)

Adaptive Dynamic Programming for Control Algorithms and Stability

CERN Document Server

Zhang, Huaguang; Luo, Yanhong; Wang, Ding

2013-01-01

There are many methods of stable controller design for nonlinear systems. In seeking to go beyond the minimum requirement of stability, Adaptive Dynamic Programming for Control approaches the challenging topic of optimal control for nonlinear systems using the tools of  adaptive dynamic programming (ADP). The range of systems treated is extensive; affine, switched, singularly perturbed and time-delay nonlinear systems are discussed as are the uses of neural networks and techniques of value and policy iteration. The text features three main aspects of ADP in which the methods proposed for stabilization and for tracking and games benefit from the incorporation of optimal control methods: • infinite-horizon control for which the difficulty of solving partial differential Hamilton–Jacobi–Bellman equations directly is overcome, and  proof provided that the iterative value function updating sequence converges to the infimum of all the value functions obtained by admissible control law sequences; • finite-...

On a program manifold's stability of one contour automatic control systems

Science.gov (United States)

Zumatov, S. S.

2017-12-01

Methodology of analysis of stability is expounded to the one contour systems automatic control feedback in the presence of non-linearities. The methodology is based on the use of the simplest mathematical models of the nonlinear controllable systems. Stability of program manifolds of one contour automatic control systems is investigated. The sufficient conditions of program manifold's absolute stability of one contour automatic control systems are obtained. The Hurwitz's angle of absolute stability was determined. The sufficient conditions of program manifold's absolute stability of control systems by the course of plane in the mode of autopilot are obtained by means Lyapunov's second method.

Application oriented programming and control of industrial robots

International Nuclear Information System (INIS)

Nilsson, Klas.

1992-07-01

Efficient use of industrial robots requires a strong interplay between user level commands, the motion control system, and external equipment. It should also be possible for an experienced application engineer to tailor the motion control to a specific application in a convenient way, instead of deficient utilization of the device or tricky user programming which is often the case today. A layered software architecture has been designed based on an application oriented view, considering typical hardware and software constraints. The top layers or the architecture support improved integration of off-line programming with interactive teach-in programming. The proposed solution is based on a transformation of robot programs between an on-line and an off-line representation. A central part of the architecture is an intermediate software layer, allowing the experienced user to introduce application specific motion primitives, on top of the motion control system. Flexibility during system configuration combined with computing efficiency and performance at run-time is of major importance. The solution is based on so called actions, which are methods to be passed between different software layers. Such methods can be specification of nonlinear control parameters, application specific control strategies, or treatment of external sensor signals. The actions can be implemented efficiently even in the multiprocessor case by using relocatable executable pieces of code generated from a special cross-compilation strategy. The lowest layers, comprising the motion control, have to be efficient and still fit in with the upper layers. In these layers, software solutions include an external sensor interface and a concept of motion pipelining allowing sensor based motions to be partly computed in advance. An experimental platform, built around commercially available robots, has been developed to verify the proposed solutions. (au)

The value of partnerships in state obesity prevention and control programs.

Science.gov (United States)

Hersey, James; Kelly, Bridget; Roussel, Amy; Curtis, LaShawn; Horne, Joseph; Williams-Piehota, Pamela; Kuester, Sarah; Farris, Rosanne

2012-03-01

State health departments funded by the Centers for Disease Control and Prevention's Nutrition, Physical Activity, and Obesity Program collaborate with multiple partners to develop and implement comprehensive obesity prevention and control programs. A mixed-methods evaluation of 28 state programs over a 5-year period assessed states' progress on program requirements, including developing statewide partnerships and coordinating with partners to support obesity prevention and control efforts. States with greater partnership involvement leveraged more funding support for their programs, passed more obesity-related policies, and were more likely to implement obesity interventions in multiple settings. Case studies provided guidance for establishing and maintaining strong partnerships. Findings from this study offer emerging evidence to support assumptions about the centrality of partnerships to states' success in obesity program development and implementation and related health promotion activities.

A user's guide to the Flexible Spacecraft Dynamics and Control Program

Science.gov (United States)

Fedor, J. V.

1984-01-01

A guide to the use of the Flexible Spacecraft Dynamics Program (FSD) is presented covering input requirements, control words, orbit generation, spacecraft description and simulation options, and output definition. The program can be used in dynamics and control analysis as well as in orbit support of deployment and control of spacecraft. The program is applicable to inertially oriented spinning, Earth oriented or gravity gradient stabilized spacecraft. Internal and external environmental effects can be simulated.

Knowledge based system for control rod programming of BWRs

International Nuclear Information System (INIS)

Fukuzaki, Takaharu; Yoshida, Ken-ichi; Kobayashi, Yasuhiro

1988-01-01

A knowledge based system has been developed to support designers in control rod programming of BWRs. The programming searches through optimal control rod patterns to realize safe and effective burning of nuclear fuel. Knowledge of experienced designers plays the main role in minimizing the number of calculations by the core performance evaluation code. This code predicts power distibution and thermal margins of the nuclear fuel. This knowledge is transformed into 'if-then' type rules and subroutines, and is stored in a knowledge base of the knowledge based system. The system consists of working area, an inference engine and the knowledge base. The inference engine can detect those data which have to be regenerated, call those subroutine which control the user's interface and numerical computations, and store competitive sets of data in different parts of the working area. Using this system, control rod programming of a BWR plant was traced with about 500 rules and 150 subroutines. Both the generation of control rod patterns for the first calculation of the code and the modification of a control rod pattern to reflect the calculation were completed more effectively than in a conventional method. (author)

The first decade of the Massachusetts Tobacco Control Program.

Science.gov (United States)

Koh, Howard K; Judge, Christine M; Robbins, Harriet; Celebucki, Carolyn Cobb; Walker, Deborah K; Connolly, Gregory N

2005-01-01

This article provides a comprehensive overview of the first decade of the Massachusetts Tobacco Control Program (MTCP). Born after Massachusetts passed a 1992 ballot initiative raising cigarette excise taxes to fund the program, MTCP greatly reduced statewide cigarette consumption before being reduced to a skeletal state by funding cuts. The article describes the program's components and goals, details outcomes, presents a summary of policy accomplishments, and reviews the present status of MTCP in the current climate of national and state fiscal crises. The first decade of the MTCP offers many lessons learned for the future of tobacco control.

Computer program for automatic generation of BWR control rod patterns

International Nuclear Information System (INIS)

Taner, M.S.; Levine, S.H.; Hsia, M.Y.

1990-01-01

A computer program named OCTOPUS has been developed to automatically determine a control rod pattern that approximates some desired target power distribution as closely as possible without violating any thermal safety or reactor criticality constraints. The program OCTOPUS performs a semi-optimization task based on the method of approximation programming (MAP) to develop control rod patterns. The SIMULATE-E code is used to determine the nucleonic characteristics of the reactor core state

An improved instrument setpoint control program

International Nuclear Information System (INIS)

Cash, J.S. Jr.; George, R.T.; Kincaid, S.C.

1991-01-01

Instrument setpoints have a definite and often significant impact on plant safety, reliability, and availability. Although typically overshadowed by plant design, modification, and physical change activities, instrument setpoints can alter plant status and system operating characteristics just as significantly. Recognizing the need for a formal program that provides configuration control of instrument setpoints, provides a readily accessible and clearly documented basis for instrument setpoints, and integrates and coordinates operations, engineering, and maintenance activities that influence the basis for instrument setpoints, Philadelphia Electric Company (PECo) is developing an Improved Instrument Setpoint Control Program (IISCP) that incorporates current industry guidance and practices and state-of-the-art information systems technology. The IISCP was designed around PECo's then existing business processes for setpoint control, determination, and maintenance. A task force representing the various constituencies from both plants and the engineering and services organizations were formed to identify objectives and design features for the IISCP. Utilizing industry standards and guidance, regulatory documents, the experiences and good practices obtained from other utilities, and PECo's nuclear group strategies, objectives, and goals, specific objectives were identified to enhance the business processes

Scalable control program for multiprecursor flow-type atomic layer deposition system

Energy Technology Data Exchange (ETDEWEB)

Selvaraj, Sathees Kannan [Department of Chemical Engineering, University of Illinois at Chicago, Chicago, Illinois 60607 (United States); Takoudis, Christos G., E-mail: takoudis@uic.edu [Department of Chemical Engineering, University of Illinois at Chicago, Chicago, Illinois 60607 and Department of Bioengineering, University of Illinois at Chicago, Chicago, Illinois 60607 (United States)

2015-01-01

The authors report the development and implementation of a scalable control program to control flow type atomic layer deposition (ALD) reactor with multiple precursor delivery lines. The program logic is written and tested in LABVIEW environment to control ALD reactor with four precursor delivery lines to deposit up to four layers of different materials in cyclic manner. The programming logic is conceived such that to facilitate scale up for depositing more layers with multiple precursors and scale down for using single layer with any one precursor in the ALD reactor. The program takes precursor and oxidizer exposure and purging times as input and controls the sequential opening and closing of the valves to facilitate the complex ALD process in cyclic manner. The program could be used to deposit materials from any single line or in tandem with other lines in any combination and in any sequence.

Model-based control strategies for systems with constraints of the program type

Science.gov (United States)

Jarzębowska, Elżbieta

2006-08-01

The paper presents a model-based tracking control strategy for constrained mechanical systems. Constraints we consider can be material and non-material ones referred to as program constraints. The program constraint equations represent tasks put upon system motions and they can be differential equations of orders higher than one or two, and be non-integrable. The tracking control strategy relies upon two dynamic models: a reference model, which is a dynamic model of a system with arbitrary order differential constraints and a dynamic control model. The reference model serves as a motion planner, which generates inputs to the dynamic control model. It is based upon a generalized program motion equations (GPME) method. The method enables to combine material and program constraints and merge them both into the motion equations. Lagrange's equations with multipliers are the peculiar case of the GPME, since they can be applied to systems with constraints of first orders. Our tracking strategy referred to as a model reference program motion tracking control strategy enables tracking of any program motion predefined by the program constraints. It extends the "trajectory tracking" to the "program motion tracking". We also demonstrate that our tracking strategy can be extended to a hybrid program motion/force tracking.

PLC and DTAM Software Programs for Pumping Instrumentation and Control Skid N

International Nuclear Information System (INIS)

KOCH, M.R.

2000-01-01

This document describe the software programs for the Programmable Logic Controller and the Datable Access Module for Pumping Instrumentation and Control skid ''N''. The Appendices contains copies of the printouts of these software programs. This document describes the software programs for the Allen-Bradley SLC 500 programmable logic controller (PLC) and the Allen-Bradley DTAM PLUS operator interface module used on Pumping Instrumentation and Control (PIC) skid ''N''. The software programs for the SLC 500 and DTAM Plus are based on the core programs provided by Allen-Bradley. The PLC and DTAM software programs on skid ''D'' for SX-104 are the baseline programs. These baselines have been tailored for U-farm skids. The skid ''N'' program for U-109 is similar to the skid ''M'' program for U-102. An Acceptance Test Procedure (ATP) and an Operational Test Procedure (OTP) verify that the software programs meet the specific requirements for U-109 pumping. This document represents the final PLC and DTAM programs for PIC skid ''N'' at U-109. These programs were printed out after the performance of the OTP. The OTP acts as the final qualification test for the software programs. Functional requirements and details of the PLC ladder logic are described in this document. The final programs entered into the PLC and DTAM Plus are included as Appendices to this document

Systematic control of large computer programs

International Nuclear Information System (INIS)

Goedbloed, J.P.; Klieb, L.

1986-07-01

A package of CCL, UPDATE, and FORTRAN procedures is described which facilitates the systematic control and development of large scientific computer programs. The package provides a general tool box for this purpose which contains many conveniences for the systematic administration of files, editing, reformating of line printer output files, etc. In addition, a small number of procedures is devoted to the problem of structured development of a large computer program which is used by a group of scientists. The essence of the method is contained in three procedures N, R, and X for the creation of a new UPDATE program library, its revision, and execution, resp., and a procedure REVISE which provides a joint editor - UPDATE session which combines the advantages of the two systems, viz. speed and rigor. (Auth.)

Steam generator deposit control program assessment at Comanche Peak

International Nuclear Information System (INIS)

Stevens, J.; Fellers, B.; Orbon, S.

2002-01-01

Comanche Peak has employed a variety of methods to assess the effectiveness of the deposit control program. These include typical methods such as an extensive visual inspection program and detailed corrosion product analysis and trending. In addition, a recently pioneered technique, low frequency eddy current profile analysis (LFEC) has been utilized. LFEC provides a visual mapping of the magnetite deposit profile of the steam generator. Analysis of the LFEC results not only provides general area deposition rates, but can also provide local deposition patterns, which is indicative of steam generator performance. Other techniques utilized include trending of steam pressure, steam generator hideout-return, and flow assisted corrosion (FAC) results. The sum of this information provides a comprehensive assessment of the deposit control program effectiveness and the condition of the steam generator. It also provides important diagnostic and predictive information relative to steam generator life management and mitigative strategies, such as special cleaning procedures. This paper discusses the techniques employed by Comanche Peak Chemistry to monitor the effectiveness of the deposit control program and describes how this information is used in strategic planning. (authors)

Establishing a volumetric measurement control program

International Nuclear Information System (INIS)

Holt, S.H.; Jenkins, E.W.

1993-01-01

At the Savannah River Site (SRS), several facilities have nearly all their special nuclear material in solution and therefore, volume measurements play a key role in the accountability of these materials. Normally, facilities rely on frequent instrument calibrations, periodic tank calibrations and proper instrument configuration to ensure measurement control. At SRS, methods have been employed that go beyond these basic steps to monitor the volume measurement systems and provide real time indication of measurement control. These methods can be used to indicate if a tank requires recalibration, if there is a sampling problem, or if there is an instrument problem. The methods include: sample density comparison, in-tank to laboratory density comparison, redundant instrument comparison and tank to tank transfer comparison. This paper describes these methods and the generation of control charts to track these comparisons in real time

Expert system for control rod programming of boiling water reactors

International Nuclear Information System (INIS)

Fukuzaki, T.; Yoshida, K.; Kobayashi, Y.; Matsuura, H.; Hoshi, K.

1986-01-01

Control rod programming, one of the main tasks in reactor core management of boiling water reactors (BWRs), can be successfully accomplished by well-experienced engineers. By use of core performance evaluation codes, their knowledge plays the main role in searching through optimal control rod patterns and exposure points for adjusting notch positions and exchanging rod patterns. An expert system has been developed, based on a method of knowledge engineering, to lighten the engineer's load in control rod programming. This system utilizes an inference engine suited for planning/designing problems, and stores the knowledge of well-experienced engineers in its knowledge base. In this report, the inference engine, developed considering the characteristics of the control rod programming, is introduced. Then the constitution and function of the expert system are discussed

Food and Nutrition Services Quality Control Management Program.

Science.gov (United States)

Wimsatt-Fraim, Teresa S.

A program was conducted to improve the quality of food service through the training of 44 food and nutrition service employees in a 200-bed hospital. A 12-week quality control program was implemented to address four key areas: food temperatures, food accuracy, food quality, and dietary personnel. Learning strategies, emphasizing critical thinking…

PLC/DTAM Software Programs for Pumping Instrumentation and Control Skid ''L''

International Nuclear Information System (INIS)

KOCH, M.R.

2000-01-01

This document describes the software programs for the Programmable Logic Controller and the Data Table Access Module for Pumping Instrumentation and Control skid ''L''. The Appendices contains copies of the printouts of these software programs

Dedicated Programming Language for Small Distributed Control Divices

DEFF Research Database (Denmark)

Madsen, Per Printz; Borch, Ole

2007-01-01

. This paper describes a new, flexible and simple language for programming distributed control tasks. The compiler for this language generates a target code that is very easy to interpret. A interpreter, that can be easy ported to different hardwares, is described. The new language is simple and easy to learn...... become a reality if each of these controlling computers can be configured to perform a cooperative task. This again requires the necessary communicating facilities. In other words this requires that all these simple and distributed computers can be programmed in a simple and hardware independent way...

The sheep blowfly genetic control program in Australia

International Nuclear Information System (INIS)

Foster, Geoffrey G.

1989-01-01

The blowfly Lucilia cuprina is the most important myiasis pet of sheep in Australia. Other species are associated with sheep myiasis, but L. cuprina is probably responsible for initiating more than 90% of infestations. Annual costs of production losses, prevention and treatment have been estimated at $149 millions in 1985. Prevention and treatment encompass both insecticidal applications to sheep and non-chemical management practices. In the absence of effective preventive measures, the sheep industry would be non-viable over much of Australia. Insecticide usage against L. cuprina has been marked by the appearance of widespread resistance to cyclodienes in 1956, the organophosphates in 1965, and carbamates in 1966. Resistance has not yet been reported against the triazine compounds introduced for blowfly control in 1981. The most effective non-chemical control measures are surgical (removal of skin from the breech in certain breeds of sheep, and tail-docking). They protect sheep by reducing favourable oviposition sites (dung and urine-stained wool). The spectre of insecticide resistance and the early success of the sterile insect technique (SIT) against screwworm fly in the U.S.A., led this Division to consider SIT and other autocidal methods in the 1960s. The L. cuprina genetics research program was established in 1966 and subsequently expanded in 1971. More recently, lobbying by animal welfare groups against surgical blowfly control practices, as well as increasing consumer awareness of insecticide residues in animal products, have accelerated the search for alternatives to chemical control. When SIT was first considered for L. cuprina control in 1960, little was known about the population dynamics of L. cuprina. There were insufficient ecological data to evaluate the prospects of alternative strategies such as suppression or containment. The number of flies which would have to be released in a SIT program was unknown, as were the costs. Assuming that the cost of

CDC Best Practices for Comprehensive Tobacco Control Programs - 2007

Data.gov (United States)

U.S. Department of Health & Human Services — Centers for Disease Control and Prevention (CDC). Best Practices for Comprehensive Tobacco Control Programs. Funding. CDC's Best Practices for Comprehensive Tobacco...

CDC Best Practices for Comprehensive Tobacco Control Programs - 2014

Data.gov (United States)

U.S. Department of Health & Human Services — Centers for Disease Control and Prevention (CDC). Best Practices for Comprehensive Tobacco Control Programs. Funding. CDC's Best Practices for Comprehensive Tobacco...

PLC/DTAM Software Programs for Pumping Instrumentation and Control Skid L

Energy Technology Data Exchange (ETDEWEB)

KOCH, M.R.

2000-01-03

This document describes the software programs for the Programmable Logic Controller and the Data Table Access Module for Pumping Instrumentation and Control skid ''L''. The Appendices contains copies of the printouts of these software programs.

Space station environmental control and life support systems test bed program - an overview

Science.gov (United States)

Behrend, Albert F.

As the National Aeronautics and Space Administration (NASA) begins to intensify activities for development of the Space Station, decisions must be made concerning the technical state of the art that will be baselined for the initial Space Station system. These decisions are important because significant potential exists for enhancing system performance and for reducing life-cycle costs. However, intelligent decisions cannot be made without an adequate assessment of new and ready technologies, i.e., technologies which are sufficiently mature to allow predevelopment demonstrations to prove their application feasibility and to quantify the risk associated with their development. Therefore, the NASA has implemented a technology development program which includes the establishment of generic test bed capabilities in which these new technologies and approaches can be tested at the prototype level. One major Space Station subsystem discipline in which this program has been implemented is the environmental control and life support system (ECLSS). Previous manned space programs such as Gemini, Apollo, and Space Shuttle have relied heavily on consumables to provide environmental control and life support services. However, with the advent of a long-duration Space Station, consumables must be reduced within technological limits to minimize Space Station resupply penalties and operational costs. The use of advanced environmental control and life support approaches involving regenerative processes offers the best solution for significant consumables reduction while also providing system evolutionary growth capability. Consequently, the demonstration of these "new technologies" as viable options for inclusion in the baseline that will be available to support a Space Station initial operational capability in the early 1990's becomes of paramount importance. The mechanism by which the maturity of these new regenerative life support technologies will be demonstrated is the Space

OVERVIEW OF ADVANCED PETROLEUM-BASED FUELS-DIESEL EMISSIONS CONTROL PROGRAM (APBF-DEC)

Energy Technology Data Exchange (ETDEWEB)

Sverdrup, George M.

2000-08-20

The Advanced Petroleum-Based Fuels-Diesel Emissions Control Program (APBF-DEC) began in February 2000 and is supported by government agencies and industry. The purpose of the APBF-DEC program is to identify and evaluate the optimal combinations of fuels, lubricants, diesel engines, and emission control systems to meet the projected emission standards for the 2000 to 2010 time period. APBF-DEC is an outgrowth of the earlier Diesel Emission Control-Sulfur Effects Program (DECSE), whose objective is to determine the impact of the sulfur levels in fuel on emission control systems that could lower the emissions of NOx and particulate matter (PM) from diesel powered vehicles in the 2002 to 2004 period. Results from the DECSE studies of two emission control technologies-diesel particle filter (DPF) and NOx adsorber-will be used in the APBF-DEC program. These data are expected to provide initial information on emission control technology options and the effects of fuel properties (including additives) on the performance of emission control systems.

Effects of a randomized controlled trial to assess the six-months effects of a school based smoking prevention program in Saudi Arabia.

Science.gov (United States)

Mohammed, Mutaz; Eggers, Sander Matthijs; Alotaiby, Fahad F; de Vries, Nanne; de Vries, Hein

2016-09-01

To examine the efficacy of a smoking prevention program which aimed to address smoking related cognitions and smoking behavior among Saudi adolescents age 13 to 15. A randomized controlled trial was used. Respondents in the experimental group (N=698) received five in-school sessions, while those in the control group (N=683) received no smoking prevention information (usual curriculum). Post-intervention data was collected six months after baseline. Logistic regression analysis was applied to assess effects on smoking initiation, and linear regression analysis was applied to assess changes in beliefs and analysis of covariance (ANCOVA) was used to assess intervention effects. All analyses were adjusted for the nested structure of students within schools. At post-intervention respondents from the experimental group reported in comparison with those from the control group a significantly more negative attitude towards smoking, stronger social norms against smoking, higher self-efficacy towards non-smoking, more action planning to remain a non-smoker, and lower intentions to smoke in the future. Smoking initiation was 3.2% in the experimental group and 8.8% in the control group (pnon-smoking cognitions and non-smoking behavior. Therefore it is recommended to implement the program at a national level in Saudi-Arabia. Future studies are recommended to assess long term program effects and the conditions favoring national implementation of the program. Copyright © 2016 Elsevier Inc. All rights reserved.

Implementation contexts of a Tuberculosis Control Program in Brazilian prisons

Directory of Open Access Journals (Sweden)

Luisa Gonçalves Dutra de Oliveira

2015-01-01

Full Text Available OBJECTIVE To analyze the influence from context characteristics in the control of tuberculosis in prisons, and the influence from the program implementation degrees in observed effects.METHODS A multiple case study, with a qualitative approach, conducted in the prison systems of two Brazilian states in 2011 and 2012. Two prisons were analyzed in each state, and a prison hospital was analyzed in one of them. The data were submitted to a content analysis, which was based on external, political-organizational, implementation, and effect dimensions. Contextual factors and the ones in the program organization were correlated. The independent variable was the program implementation degree and the dependent one, the effects from the Tuberculosis Control Program in prisons.RESULTS The context with the highest sociodemographic vulnerability, the highest incidence rate of tuberculosis, and the smallest amount of available resources were associated with the low implementation degree of the program. The results from tuberculosis treatment in the prison system were better where the program had already been partially implemented than in the case with low implementation degree in both cases.CONCLUSIONS The implementation degree and its contexts – external and political-organizational dimensions – simultaneously contribute to the effects that are observed in the control of tuberculosis in analyzed prisons.

Traffic Control Device Evaluation Program : FY 2017

Science.gov (United States)

2018-03-01

This report presents findings on the activities conducted in the Traffic Control Device Evaluation Program during the 2017 fiscal year. The research on sponsored changeable message signs (continued from the previous year) was terminated by the Federa...

Development of in-plant real-time materials control: the DYMAC program

International Nuclear Information System (INIS)

Augustson, R.H.

1976-01-01

LASL is in the process of developing a dynamic materials control program, called DYMAC, to provide the technology for stringent real-time nuclear materials control. The DYMAC program combines hardware and software into four component subsystems: nondestructive assay (NDA), instrumentation, data acquisition, data base management, and real-time accountability. To demonstrate the feasibility of DYMAC, a working real-time materials control system will be installed at the new plutonium facility presently under construction at LASL. Program emphasis is on developing practical solutions to generic problems and communicating those solutions to other installations for use throughout the nuclear fuel cycle

On a program manifold’s stability of one contour automatic control systems

Directory of Open Access Journals (Sweden)

Zumatov S. S.

2017-12-01

Full Text Available Methodology of analysis of stability is expounded to the one contour systems automatic control feedback in the presence of non-linearities. The methodology is based on the use of the simplest mathematical models of the nonlinear controllable systems. Stability of program manifolds of one contour automatic control systems is investigated. The sufficient conditions of program manifold’s absolute stability of one contour automatic control systems are obtained. The Hurwitz’s angle of absolute stability was determined. The sufficient conditions of program manifold’s absolute stability of control systems by the course of plane in the mode of autopilot are obtained by means Lyapunov’s second method.

Robust Control Design via Linear Programming

Science.gov (United States)

Keel, L. H.; Bhattacharyya, S. P.

1998-01-01

This paper deals with the problem of synthesizing or designing a feedback controller of fixed dynamic order. The closed loop specifications considered here are given in terms of a target performance vector representing a desired set of closed loop transfer functions connecting various signals. In general these point targets are unattainable with a fixed order controller. By enlarging the target from a fixed point set to an interval set the solvability conditions with a fixed order controller are relaxed and a solution is more easily enabled. Results from the parametric robust control literature can be used to design the interval target family so that the performance deterioration is acceptable, even when plant uncertainty is present. It is shown that it is possible to devise a computationally simple linear programming approach that attempts to meet the desired closed loop specifications.

7 CFR 58.149 - Alternate quality control programs for dairy products.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Alternate quality control programs for dairy products... for dairy products. (a) When a plant has in operation an acceptable quality control program which is... (CONTINUED) REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946 AND THE EGG PRODUCTS...

Programs for control of an analog-signal switching network

International Nuclear Information System (INIS)

D'Ottavio, T.; Enriquez, R.; Katz, R.; Skelly, J.

1989-01-01

A suite of programs has been developed to control the network of analog-signal switching multiplexers in the AGS complex. The software is driven by a relational database which describes the architecture of the multiplexer tree and the set of available analog signals. Signals are routed through a three-layer multiplexer tree, to be made available at four consoles each with three 4-trace oscilloscopes. A menu-structured operator interface program is available at each console, to accept requests to route any available analog signal to any of that console's 12 oscilloscope traces. A common routing-server program provides automatic routing-server program provides automatic routing of requested signals through the layers of multiplexers, maintaining a reservation database to denote free and in-use trunks. Expansion of the analog signal system is easily accommodated in software by adding new signals, trunks, multiplexers, or consoles to the database. Programmatic control of the triggering signals for each of the oscilloscopes is also provided. 3 refs., 4 figs., 3 tabs

Coordination Between the HEU Transparency Program and the Material Protection, Control and Accountability Program

International Nuclear Information System (INIS)

Glaser, J.; Hernandez, J.; Dougherty, D.; Bieniawski, A.; Cahalane, P.; Mastal, E.

2000-01-01

DOE sponsored programs such as Material Protection Control and Accountability (MPC and A) and implementation of the Highly-Enriched Uranium (HEU) Transparency Program send US personnel into Russian nuclear facilities and receive Russian representatives from these programs. While there is overlap in the Russian nuclear facilities visited by these two programs, there had not been any formal mechanism to share information between them. Recently, an MPC and A/HEU Working Group was developed to facilitate the sharing of appropriate information and to address concerns expressed by Minatom and Russian facility personnel such as US visit scheduling conflicts. This paper discusses the goals of the Working Group and ways it has helped to allow the programs to work more efficiently with the Russian facilities

Quality-control activities of the Hanford Environmental Surveillance Program

International Nuclear Information System (INIS)

Price, K.R.; Jaquish, R.E.

1982-01-01

A comprehensive approach to quality control (QC) has been developed by the Pacific Northwest Laboratory for the Hanford Environmental Surveillance Program. The framework of quality control for the surveillance program has been documented in a QC implementation guide wherein QC requirements are specified and specific responsibilities and authorities are described. Subjects in the guide include the collection, analysis, and reporting of samples as well as equipment calibration and maintenance, training, audits, and record keeping. A QC file and library have been established to store pertinent documentation, records, and references for ready access

PLC/DTAM Software Programs for Pumping Instrumentation and Control Skid X

International Nuclear Information System (INIS)

HORNER, T.M.

2001-01-01

This document describes the software programs for the Allen-Bradley SLC 500 programmable logic controller (PLC) and the Allen-Bradley DTAM PLUS operator interface module used on Pumping Instrumentation and Control (PIC) skid ''X''. The software programs for the SLC 500 and DTAM Plus are based on the core programs provided by Allen-Bradley. The PLC and DTAM software programs on skid ''D'' for SX-104 are the baseline programs. These baselines will be tailored for each individual BY-farm skid. An Acceptance Test Procedure (ATP) and an Operational Test Procedure (OTP) verify that the software programs meet the specific requirements for BY-105 pumping. This document represents the final PLC and DTAM programs for PIC skid ''X'' at BY-105. These programs were printed out after the performance of the OTP. The OTP acts as the final qualification test for the software programs. Functional requirements and details of the PLC ladder logic are described in this document. The final programs entered into the PLC and DTAM Plus are included as Appendices to this document

Output-Feedback Control of Unknown Linear Discrete-Time Systems With Stochastic Measurement and Process Noise via Approximate Dynamic Programming.

Science.gov (United States)

Wang, Jun-Sheng; Yang, Guang-Hong

2017-07-25

This paper studies the optimal output-feedback control problem for unknown linear discrete-time systems with stochastic measurement and process noise. A dithered Bellman equation with the innovation covariance matrix is constructed via the expectation operator given in the form of a finite summation. On this basis, an output-feedback-based approximate dynamic programming method is developed, where the terms depending on the innovation covariance matrix are available with the aid of the innovation covariance matrix identified beforehand. Therefore, by iterating the Bellman equation, the resulting value function can converge to the optimal one in the presence of the aforementioned noise, and the nearly optimal control laws are delivered. To show the effectiveness and the advantages of the proposed approach, a simulation example and a velocity control experiment on a dc machine are employed.

"APEC blue"--The effects and implications of joint pollution prevention and control program.

Science.gov (United States)

Wang, Hongbo; Zhao, Laijun; Xie, Yujing; Hu, Qingmi

2016-05-15

To ensure good air quality in Beijing during Asia-Pacific Economic Cooperation (APEC) China 2014, Beijing and its neighboring five provinces and the associated cities were combined under the Joint Prevention and Control of Atmospheric Pollution (JPCAP) program, which implemented rigorous cooperative emission reduction measures. The program was a unique and large-scale artificial experiment that showed that such measures can achieve excellent results, and it led to the popular "APEC blue" catchphrase (i.e., Beijing's skies became blue as pollution levels decreased). This artificial experiment provided the means to effectively conduct JPCAP strategies in the future. Accordingly, our research focused on the characteristics of the six primary pollutants in Beijing. We found that the JPCAP measures directly reduced concentrations of all pollutants except O3. Through correlation analysis, we found that the band distribution of the cities with strong correlations in PM2.5 and PM10 concentrations was affected by wind conditions. Therefore, JPCAP measures should account for specific seasonal and climatic conditions. Based on cluster analysis using the results from the correlation analysis, we divided 13 cities within a 300-km radius of Beijing into different groups according to the similarity of their PM2.5 and PM10 correlation coefficients. For JPCAP measures relevant to PM2.5 and PM10, we found differences in the degrees of collaboration among cities. Therefore, depending upon the pollutant type, the JPCAP strategy should account for the cities involved, the scope of the core area, and the optimal cities to involve in the collaborative efforts based on cost-effectiveness and collaborative difficulty among the involved cities. Copyright © 2016 Elsevier B.V. All rights reserved.

PLC and DTAM Software Programs for Pumping Instrumentation and Control Skid P

International Nuclear Information System (INIS)

KOCH, M.R.

2000-01-01

This document describe the software programs for the Programmable Logic Controller and the Datable Access Module for Pumping Instrumentation and Control skid ''P''. The Appendices contains copies of the printouts of these software programs

[Analysis of the results of the SEIMC External Quality Control Program, 2007].

Science.gov (United States)

Guna Serrano, María del Remedio; Orta Mira, Nieves; Ovies, María; Gimeno Cardona, Concepción; Pérez, José L

2008-11-01

The External Quality Control Program of the Spanish Society of Infectious Diseases and Clinical Microbiology (SEIMC) includes controls for bacteriology, serology, mycology, parasitology, mycobacteria, virology and molecular microbiology. This article presents the most important conclusions and lessons drawn from the 2007 controls. As a whole, the results obtained in 2007 confirm the excellent skill and good technical standards found in previous years. However, erroneous results can be obtained in any laboratory and in clinically relevant determinations. A few deviations were observed in some controls, calling for critical reflection. Once again, the results of this program highlighted the need to complement internal with external controls, such as those offered by the SEIMC program.

Water quality control program in experimental circuits

International Nuclear Information System (INIS)

Cegalla, Miriam A.

1996-01-01

The Water Quality Control Program of the Experimental Circuits visualizes studying the water chemistry of the cooling in the primary and secondary circuits, monitoring the corrosion of the systems and studying the mechanism of the corrosion products transport in the systems. (author)

Neurolinguistic programming training, trait anxiety, and locus of control.

Science.gov (United States)

Konefal, J; Duncan, R C; Reese, M A

1992-06-01

Training in the neurolinguistic programming techniques of shifting perceptual position, visual-kinesthetic dissociation, timelines, and change-history, all based on experiential cognitive processing of remembered events, leads to an increased awareness of behavioral contingencies and a more sensitive recognition of environmental cues which could serve to lower trait anxiety and increase the sense of internal control. This study reports on within-person and between-group changes in trait anxiety and locus of control as measured on the Spielberger State-Trait Anxiety Inventory and Wallston, Wallston, and DeVallis' Multiple Health Locus of Control immediately following a 21-day residential training in neurolinguistic programming. Significant with-in-person decreases in trait-anxiety scores and increases in internal locus of control scores were observed as predicted. Chance and powerful other locus of control scores were unchanged. Significant differences were noted on trait anxiety and locus of control scores between European and U.S. participants, although change scores were similar for the two groups. These findings are consistent with the hypothesis that this training may lower trait-anxiety scores and increase internal locus of control scores. A matched control group was not available, and follow-up was unfortunately not possible.

PLC and DTAM Software Programs for Pumping Instrumentation and Control Skid ''M''

International Nuclear Information System (INIS)

KOCH, M.R.

2000-01-01

This document describes the software programs for the Programmable Logic Controller and the Data Table Access Module for Pumping Instrumentation and Control skid ''M''. The Appendices contains copies of the printouts of these software programs

Establishment of seed quality control programs Implantação de programas de controle de qualidade de sementes

Directory of Open Access Journals (Sweden)

S. M. Cicero

1998-01-01

Full Text Available An efficient quality control program should lead to the production of high quality seeds. Consequently, a series of technical and administrative procedures must be adopted in a way that does not compromise this objective. Considering that, in applied terms, external control becomes less important as internal control programs advance technologically, this work emphasizes the principle factors that should be considered in the implantation of a seed quality control program, such as: work groups, physical structure and procedures to initiate the program.Um programa de controle de qualidade deve proporcionar a produção de sementes de alta qualidade. Para que tal objetivo seja alcançado com sucesso, e necessário a adoção de uma serie de procedimentos técnicos e administrativos, sem os quais haverá comprometimento das metas a serem atingidas. Levando-se em conta que, em termos aplicados, o controle externo perde importância na medida que avançam tecnologicamente os programas de controle interno, o presente trabalho aborda os principais fatores que devem ser considerados na implantação de um programa de controle de qualidade de sementes, tais como: equipe de trabalho, estrutura física e procedimentos para iniciar o programa.

The first decade of the Massachusetts Tobacco Control Program.

OpenAIRE

Koh, Howard K.; Judge, Christine M.; Robbins, Harriet; Celebucki, Carolyn Cobb; Walker, Deborah K.; Connolly, Gregory N.

2005-01-01

This article provides a comprehensive overview of the first decade of the Massachusetts Tobacco Control Program (MTCP). Born after Massachusetts passed a 1992 ballot initiative raising cigarette excise taxes to fund the program, MTCP greatly reduced statewide cigarette consumption before being reduced to a skeletal state by funding cuts. The article describes the program's components and goals, details outcomes, presents a summary of policy accomplishments, and reviews the present status of M...

Modifications to the control program HASP

International Nuclear Information System (INIS)

Bartoli, M.; Dall'Olio, L.; Mareso, T.; Ricci, F.

1973-01-01

Modification to HASP version 3, level 0, a control program for an electronic computer, was described with the purpose of solving some operative and managing problems not solved by the standard version for the IBM 360/75 computer. The application and utilization of these facilities require a deep knowledge of the HASP II design, version 3, level 0, 360D-05.1.014

Programming a real-time operating system for satellite control applications Satellite Control Applications

International Nuclear Information System (INIS)

Omer, M.; Anjum, O.; Suddle, M.R.

2004-01-01

With the realization of ideas like formation flights and multi-body space vehicles the demands on an attitude control system have become increasingly complex. Even in its most simplified form, the control system for a typical geostationary satellite has to run various supervisory functions along with determination and control algorithms side by side. Within each algorithm it has to employ multiple actuation and sensing mechanisms and service real time interrupts, for example, in the case of actuator saturation and sensor data fusion. This entails the idea of thread scheduling and program synchronization, tasks specifically meant for a real time OS. This paper explores the embedding of attitude determination and control loop within the framework of a real time operating system provided for TI's DSP C6xxx series. The paper details out the much functionality provided within the scaleable real time kernel and the analysis and configuration tools available, It goes on to describe a layered implementation stack associated with a typical control for Geo Stationary satellites. An application for control is then presented in which state of the art analysis tools are employed to view program threads, synchronization semaphores, hardware interrupts and data exchange pipes operating in real time. (author)

Validation of FORTRAN emulators for the G2 varian control programs

International Nuclear Information System (INIS)

Delorme, G.

1996-01-01

The extensive use of the Gentilly full scope simulator for training and verification of plant procedures, forced the development of a reliable desktop simulator for software maintenance purposes. For that we needed emulators for the control programs which run on the DCC Varian computers in the full scope simulator. This paper presents the validation results for the Reactor Regulating System (RRS) program. This emulator was programmed in a modular fashion providing ease of maintenance and of transportation to another environment. The results obtained with specific tests or with integrated testing involving complex control rule interactions, compared favorably with the ones obtained using the actual plant control programs running on the full scope simulator, which constitutes an irrefutable validation procedure. This RRS package along with the other emulators being validated In this manner could be used in safety codes with confidence. (author)

Validation of a proposal for evaluating hospital infection control programs.

Science.gov (United States)

Silva, Cristiane Pavanello Rodrigues; Lacerda, Rúbia Aparecida

2011-02-01

To validate the construct and discriminant properties of a hospital infection prevention and control program. The program consisted of four indicators: technical-operational structure; operational prevention and control guidelines; epidemiological surveillance system; and prevention and control activities. These indicators, with previously validated content, were applied to 50 healthcare institutions in the city of São Paulo, Southeastern Brazil, in 2009. Descriptive statistics were used to characterize the hospitals and indicator scores, and Cronbach's α coefficient was used to evaluate the internal consistency. The discriminant validity was analyzed by comparing indicator scores between groups of hospitals: with versus without quality certification. The construct validity analysis was based on exploratory factor analysis with a tetrachoric correlation matrix. The indicators for the technical-operational structure and epidemiological surveillance presented almost 100% conformity in the whole sample. The indicators for the operational prevention and control guidelines and the prevention and control activities presented internal consistency ranging from 0.67 to 0.80. The discriminant validity of these indicators indicated higher and statistically significant mean conformity scores among the group of institutions with healthcare certification or accreditation processes. In the construct validation, two dimensions were identified for the operational prevention and control guidelines: recommendations for preventing hospital infection and recommendations for standardizing prophylaxis procedures, with good correlation between the analysis units that formed the guidelines. The same was found for the prevention and control activities: interfaces with treatment units and support units were identified. Validation of the measurement properties of the hospital infection prevention and control program indicators made it possible to develop a tool for evaluating these programs

SEMTAP (Serpentine End Match TApe program): The Easy Way to Program Your Numerically Controlled Router for the Production of SEM Joints

Science.gov (United States)

Ronald E. Coleman

1977-01-01

SEMTAP (Serpentine End Match TApe Program) is an easy and inexpensive method of programing a numerically controlled router for the manufacture of SEM (Serpentine End Matching) joints. The SEMTAP computer program allows the user to issue commands that will accurately direct a numerically controlled router along any SEM path. The user need not be a computer programer to...

A mathematical method for boiling water reactor control rod programming

International Nuclear Information System (INIS)

Tokumasu, S.; Hiranuma, H.; Ozawa, M.; Yokomi, M.

1985-01-01

A new mathematical programming method has been developed and utilized in OPROD, an existing computer code for automatic generation of control rod programs as an alternative inner-loop routine for the method of approximate programming. The new routine is constructed of a dual feasible direction algorithm, and consists essentially of two stages of iterative optimization procedures Optimization Procedures I and II. Both follow almost the same algorithm; Optimization Procedure I searches for feasible solutions and Optimization Procedure II optimizes the objective function. Optimization theory and computer simulations have demonstrated that the new routine could find optimum solutions, even if deteriorated initial control rod patterns were given

A program development tool for KEK VME-MAP control system

International Nuclear Information System (INIS)

Nakagawa, H.; Katoh, T.; Kadokura, E.; Akiyama, A.; Nigorikawa, K.; Ishii, K.

1992-01-01

The control system for KEK 12 GeV Proton Synchrotron has been replaced with a distributed VME-bus based microcomputer system and a MAP local area network. In order to simplify programming for network application tasks, a set of a preprocessor for a PASCAL compiler and a network communication server has been developed. Application programs for accelerator control system have blocks with similar codes; sending, waiting for, receiving, analyzing messages, etc. The preprocessor called 'OBJP' incorporates such common codes into the source code written by an application programmer. In case of a simple program, the size of the source code is reduced by one tenth of a full coding. (author)

Duke Power Company's control rod wear program

International Nuclear Information System (INIS)

Culp, D.C.; Kitlan, M.S. Jr.

1990-01-01

Recent examinations performed at several foreign and domestic pressurized water reactors have identified significant control rod cladding wear, leading to the conclusion that previously believed control rod lifetimes are not attainable. To monitor control rod performance and reduce safety concerns associated with wear, Duke Power Company has developed a comprehensive control rod wear program for Ag-In-Cd and boron carbide (B 4 C) rods at the McGuire and Catawba nuclear stations. Duke Power currently uses the Westinghouse 17 x 17 Ag-In-Cd control rod design at McGuire Unit 1 and the Westinghouse 17 x 17 hybrid B 4 C control rod design with a Ag-In-Cd tip at McGuire Unit 2 and Catawba Units 1 and 2. The designs are similar, with the exception of the absorber material and clad thickness. There are 53 control rods per unit

Precedent approach to the formation of programs for cyclic objects control

Science.gov (United States)

Kulakov, S. M.; Trofimov, V. B.; Dobrynin, A. S.; Taraborina, E. N.

2018-05-01

The idea and procedure for formalizing the precedent method of formation of complex control solutions (complex control programs) is discussed with respect to technological or organizational objects, the operation of which is organized cyclically. A typical functional structure of the system of precedent control by complex technological unit is developed, including a subsystem of retrospective optimization of actually implemented control programs. As an example, the problem of constructing replaceable planograms for the operation of the link of a heading-and-winning machine on the basis of precedents is considered.

PLC and DTAM Software Programs for Pumping Instrumentation and Control Skid M

Energy Technology Data Exchange (ETDEWEB)

KOCH, M.R.

2000-02-14

This document describes the software programs for the Programmable Logic Controller and the Data Table Access Module for Pumping Instrumentation and Control skid ''M''. The Appendices contains copies of the printouts of these software programs.

Efficacy of a short multidisciplinary falls prevention program for elderly persons with osteoporosis and a fall history: a randomized controlled trial.

Science.gov (United States)

Smulders, Ellen; Weerdesteyn, Vivian; Groen, Brenda E; Duysens, Jacques; Eijsbouts, Agnes; Laan, Roland; van Lankveld, Wim

2010-11-01

To evaluate the efficacy of the Nijmegen Falls Prevention Program (NFPP) for persons with osteoporosis and a fall history in a randomized controlled trial. Persons with osteoporosis are at risk for fall-related fractures because of decreased bone strength. A decrease in the number of falls therefore is expected to be particularly beneficial for these persons. Randomized controlled trial. Hospital. Persons with osteoporosis and a fall history (N=96; mean ± SD age, 71.0±4.7y; 90 women). After baseline assessment, participants were randomly assigned to the exercise (n=50; participated in the NFPP for persons with osteoporosis [5.5wk]) or control group (n=46; usual care). Primary outcome measure was fall rate, measured by using monthly fall calendars for 1 year. Secondary outcomes were balance confidence (Activity-specific Balance Confidence Scale), quality of life (QOL; Quality of Life Questionnaire of the European Foundation for Osteoporosis), and activity level (LASA Physical Activity Questionnaire, pedometer), assessed posttreatment subsequent to the program and after 1 year of follow-up. The fall rate in the exercise group was 39% lower than for the control group (.72 vs 1.18 falls/person-year; risk ratio, .61; 95% confidence interval, .40-.94). Balance confidence in the exercise group increased by 13.9% (P=.001). No group differences were observed in QOL and activity levels. The NFPP for persons with osteoporosis was effective in decreasing the number of falls and improving balance confidence. Therefore, it is a valuable new tool to improve mobility and independence of persons with osteoporosis. Copyright © 2010 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Programming the control of magnetic field measurements

International Nuclear Information System (INIS)

David, L.

1998-01-01

This paper gives a short review concerning the new NMR probe measurement control system. Then it presents the new program 'CYCLOCHAMP' attached to the magnetic field measurement which also allows to cycle the magnetic field inside the cyclotrons and to equilibrate it among the SSC sectors. (authors)

Compliance of SLAC's Laser Safety Program with OSHA Requirements for the Control of Hazardous Energy

International Nuclear Information System (INIS)

Woods, M.

2009-01-01

SLAC's COHE program requires compliance with OSHA Regulation 29CFR1910.147, 'The control of hazardous energy (lockout/tagout)'. This regulation specifies lockout/tagout requirements during service and maintenance of equipment in which the unexpected energization or start up of the equipment, or release of stored energy, could cause injury to workers. Class 3B and Class 4 laser radiation must be considered as hazardous energy (as well as electrical energy in associated equipment, and other non-beam energy hazards) in laser facilities, and therefore requires careful COHE consideration. This paper describes how COHE is achieved at SLAC to protect workers against unexpected Class 3B or Class 4 laser radiation, independent of whether the mode of operation is normal, service, or maintenance

Creating a meaningful infection control program: one home healthcare agency's lessons.

Science.gov (United States)

Poff, Renee McCoy; Browning, Sarah Via

2014-03-01

Creating a meaningful infection control program in the home care setting proved to be challenging for agency leaders of one hospital-based home healthcare agency. Challenges arose when agency leaders provided infection control (IC) data to the hospital's IC Committee. The IC Section Chief asked for national benchmark comparisons to align home healthcare reporting to that of the hospital level. At that point, it was evident that the home healthcare IC program lacked definition and structure. The purpose of this article is to share how one agency built a meaningful IC program.

Purwarupa Sistem Kontrol Elevator Berbasis Programable Logic Control

Directory of Open Access Journals (Sweden)

Fathahillah Fathahillah

2017-12-01

Full Text Available Various methods / types of controls developed in accordance with industry needs one of them in the field of building automation system. One of the controls in the field of building automation system is the elevator control system (elevator. Early elevator control systems that transport humans or goods as vertical transportation vehicles are still conventional using human power, then evolved using steam engines, until now the elevators use AC motors equipped with control systems. The purpose of this research is to design the prototype of elevator control system using programmable logic control (PLC. The type of PLC controller used in the study using Omron PLC. The results show the design of prototype of elevator control system using PLC successfully and can control eleveator in accordance with its function, besides its programming form can be more simple.

PWM CONTROLLER'S MODELS FOR INVESTIGATION ACS IN SPICEFAMILY ECAD PROGRAMS

Directory of Open Access Journals (Sweden)

O. V. VASYLENKO

2018-05-01

Full Text Available Purpose. To improve simulation and design of Automatic Control Systems in the SPICE-compatible programs and to obtain separate economic and universal macromodels of PWM controller. Development of an PWM controller economical macromodel for the study of automatic control systems (ACS in computer-aided design (ECAD  programs, which does not generate algorithmic failures in comparison with the existing models of PWM. Findings. Analysis of SPICE-family applications’ mathematical basis allowed to classifying existing models of PWM-controllers, defining their suitability for ACS simulation. The criteria for the synthesis of new models have been defined. For the SPICE 3G algorithms, the Switch and Averaged models based on behavioral elements has been developed. Universal and economical PWM controller macromodel based on the simple algorithm for determining the output signal with minimum numbers of input parameters has been designed. For the Automated Measuring magnetic susceptibility System, the macromodel of quasi-PWM signal generator have been designed, which is used in the compensation subsystem. This model is different from the existing ones: it synthesizes the staircase output signal instead the pulse one, thus, there is direct control of the amplitude of the output signal, which is taken averaged. The adequacy of the models is confirmed as comparison of the simulation results during investigations of the model already existing in the SPICE program, as well as the results of experiments with real ACS. The modeling of the PWM controller was carried out on the basis of behavioral elements from the ECAD library, simulation (solution of algebra-differential equations systems with programming elements is based on SPICE algorithms. The object of the study was the simulation process of ACS with the pulse-width principle of adjusting the output value. The subject of the research are the models of PWM controllers. Originality. The new macromodel of PWM

Computer program for post-flight evaluation of the control surface response for an attitude controlled missile

Science.gov (United States)

Knauber, R. N.

1982-01-01

A FORTRAN IV coded computer program is presented for post-flight analysis of a missile's control surface response. It includes preprocessing of digitized telemetry data for time lags, biases, non-linear calibration changes and filtering. Measurements include autopilot attitude rate and displacement gyro output and four control surface deflections. Simple first order lags are assumed for the pitch, yaw and roll axes of control. Each actuator is also assumed to be represented by a first order lag. Mixing of pitch, yaw and roll commands to four control surfaces is assumed. A pseudo-inverse technique is used to obtain the pitch, yaw and roll components from the four measured deflections. This program has been used for over 10 years on the NASA/SCOUT launch vehicle for post-flight analysis and was helpful in detecting incipient actuator stall due to excessive hinge moments. The program is currently set up for a CDC CYBER 175 computer system. It requires 34K words of memory and contains 675 cards. A sample problem presented herein including the optional plotting requires eleven (11) seconds of central processor time.

North Fork Feather River Erosion Control Program

International Nuclear Information System (INIS)

Harrison, L.

1991-01-01

PG and E, an investor owned gas and electric utility serving northern and central California, has been engaged since 1984 in the development and implementation of a regional erosion control program for the 954 square mile northern Sierra Nevada watersheed of the East Branch of the North Fork Feather River in Plumas County, California. PG and E entered into an agreement with 13 governmental agencies and a number of private landowners using Coordinated Resource Management and Planning: to cooperatively develop, fund and implement the program. The group has completed several field projects and has a number of additional projects in various stages of development. This paper reports that the program provides multiple environmental and economic benefits including reduction of soil erosion and sedimentation, improved fisheries, enhancement of riparian habitat, increased land values, improved recreation opportunities, and preservation of watershed resources

Monsanto Mound Laboratory tritium waste control technology development program

International Nuclear Information System (INIS)

Bixel, J.C.; Kershner, C.J.; Rhinehammer, T.B.

1975-01-01

Over the past four years, implementation of tritium waste control programs has resulted in a 30-fold reduction in the gaseous tritium effluents from Mound Laboratory. However, to reduce tritium waste levels to the ''as low as practicable'' guideline poses problems that are beyond ready solution with state-of-the-art tritium control technology. To meet this advanced technology need, a tritium waste control technology program was initiated. Although the initial thrust of the work under this program was oriented toward development of gaseous effluent treatment systems, its natural evolution has been toward the liquid waste problem. It is thought that, of all the possible approaches to disposal of tritiated liquid wastes, recovery offers the greatest advantages. End products of the recovery processes would be water detritiated to a level below the Radioactivity Concentration Guide (RCG) or detritiated to a level that would permit safe recycle in a closed loop operation and enriched tritium. The detritiated water effluent could be either recycled in a closed loop operation such as in a fuel reprocessing plant or safely released to the biosphere, and the recovered tritium could be recycled for use in fusion reactor studies or other applications

A Clustered Randomized Controlled Trial of the Positive Prevention PLUS Adolescent Pregnancy Prevention Program.

Science.gov (United States)

LaChausse, Robert G

2016-09-01

To determine the impact of Positive Prevention PLUS, a school-based adolescent pregnancy prevention program on delaying sexual intercourse, birth control use, and pregnancy. I randomly assigned a diverse sample of ninth grade students in 21 suburban public high schools in California into treatment (n = 2483) and control (n = 1784) groups that participated in a clustered randomized controlled trial. Between October 2013 and May 2014, participants completed baseline and 6-month follow-up surveys regarding sexual behavior and pregnancy. Participants in the treatment group were offered Positive Prevention PLUS, an 11-lesson adolescent pregnancy prevention program. The program had statistically significant impacts on delaying sexual intercourse and increasing the use of birth control. However, I detected no program effect on pregnancy rates at 6-month follow-up. The Positive Prevention PLUS program demonstrated positive impacts on adolescent sexual behavior. This suggests that programs that focus on having students practice risk reduction skills may delay sexual activity and increase birth control use.

Development of a standard for computer program verification and control

International Nuclear Information System (INIS)

Dunn, T.E.; Ozer, O.

1980-01-01

It is expected that adherence to the guidelines of the ANS 10.4 will: 1. Provide confidence that the program conforms to its requirements specification; 2. Provide confidence that the computer program has been adequately evaluated and tested; 3. Provide confidence that program changes are adequately evaluated, tested, and controlled; and 4. Enhance assurance that reliable data will be produced for engineering, scientific, and safety analysis purposes

Automation of program model developing for complex structure control objects

International Nuclear Information System (INIS)

Ivanov, A.P.; Sizova, T.B.; Mikhejkina, N.D.; Sankovskij, G.A.; Tyufyagin, A.N.

1991-01-01

A brief description of software for automated developing the models of integrating modular programming system, program module generator and program module library providing thermal-hydraulic calcualtion of process dynamics in power unit equipment components and on-line control system operation simulation is given. Technical recommendations for model development are based on experience in creation of concrete models of NPP power units. 8 refs., 1 tab., 4 figs

Advanced Emissions Control Development Program

Energy Technology Data Exchange (ETDEWEB)

A.P.Evans; K.E. Redinger; M.J. Holmes

1998-04-01

The objective of the Advanced Emissions Control Development Program (AECDP) is to develop practical, cost-effective strategies for reducing the emissions of air toxics from coal-fired boilers. Ideally, the project aim is to effectively control air toxic emissions through the use of conventional flue gas cleanup equipment such as electrostatic precipitators (ESPS), fabric filters (baghouse), and wet flue gas desulfurization. Development work to date has concentrated on the capture of mercury, other trace metals, fine particulate and hydrogen chloride. Following the construction and evaluation of a representative air toxics test facility in Phase I, Phase II focused on the evaluation of mercury and several other air toxics emissions. The AECDP is jointly funded by the United States Department of Energy's Federal Energy Technology Center (DOE), the Ohio Coal Development Office within the Ohio Department of Development (oCDO), and Babcock& Wilcox-a McDermott company (B&W).

Artificial intelligence programming with LabVIEW: genetic algorithms for instrumentation control and optimization.

Science.gov (United States)

Moore, J H

1995-06-01

A genetic algorithm for instrumentation control and optimization was developed using the LabVIEW graphical programming environment. The usefulness of this methodology for the optimization of a closed loop control instrument is demonstrated with minimal complexity and the programming is presented in detail to facilitate its adaptation to other LabVIEW applications. Closed loop control instruments have variety of applications in the biomedical sciences including the regulation of physiological processes such as blood pressure. The program presented here should provide a useful starting point for those wishing to incorporate genetic algorithm approaches to LabVIEW mediated optimization of closed loop control instruments.

Controller design approach based on linear programming.

Science.gov (United States)

Tanaka, Ryo; Shibasaki, Hiroki; Ogawa, Hiromitsu; Murakami, Takahiro; Ishida, Yoshihisa

2013-11-01

This study explains and demonstrates the design method for a control system with a load disturbance observer. Observer gains are determined by linear programming (LP) in terms of the Routh-Hurwitz stability criterion and the final-value theorem. In addition, the control model has a feedback structure, and feedback gains are determined to be the linear quadratic regulator. The simulation results confirmed that compared with the conventional method, the output estimated by our proposed method converges to a reference input faster when a load disturbance is added to a control system. In addition, we also confirmed the effectiveness of the proposed method by performing an experiment with a DC motor. © 2013 ISA. Published by ISA. All rights reserved.

Approximate Dynamic Programming in Tracking Control of a Robotic Manipulator

Directory of Open Access Journals (Sweden)

Marcin Szuster

2016-02-01

Full Text Available This article focuses on the implementation of an approximate dynamic programming algorithm in the discrete tracking control system of the three-degrees of freedom Scorbot-ER 4pc robotic manipulator. The controlled system is included in an articulated robots group which uses rotary joints to access their work space. The main part of the control system is a dual heuristic dynamic programming algorithm that consists of two structures designed in the form of neural networks: an actor and a critic. The actor generates the suboptimal control law while the critic approximates the difference of the value function from Bellman's equation with respect to the state. The residual elements of the control system are the PD controller, the supervisory term and an additional control signal. The structure of the supervisory term derives from the stability analysis performed using the Lyapunov stability theorem. The control system works online, the neural networks' weights-adaptation procedure is performed in every iteration step, and the neural networks' preliminary learning process is not required. The performance of the control system was verified by a series of computer simulations and experiments performed using the Scorbot-ER 4pc robotic manipulator.

Optimal control of a programmed motion of a rigid spacecraft using redundant kinematics parameterizations

International Nuclear Information System (INIS)

El-Gohary, Awad

2005-01-01

This paper considers the problem of optimal controlling of a programmed motion of a rigid spacecraft. Given a cost of the spacecraft as a quadratic function of state and control variables we seek for optimal control laws as functions of the state variables and the angle of programmed rotation that minimize this cost and asymptotically stabilize the required programmed motion. The stabilizing properties of the proposed controllers are proved using the optimal Liapunov techniques. Numerical simulation study is presented

Structural optimization of static power control programs of nuclear power plants with WWER-1000

International Nuclear Information System (INIS)

Kokol, E.O.

2015-01-01

The question of possibility the power control programs switching for WWER-1000 is considered. The aim of this research is to determine the best program for the power control of nuclear reactor under cyclic diurnal behavior of electrical generation, as well as the switching implementation. The considered problem of finding the best control program refers to the multicriteria optimization class of problems. Operation of the nuclear power generation system simulated using the following power control programs: with constant average temperature of transfer fluid, with constant pressure in the reactor secondary circuit, with constant temperature in input of the nuclear reactor. The target function was proposed. It consists of three normalized criteria: the burn up fraction, the damage level of fuel rod array shells, as well as changes in the power values. When simulation of the nuclear power generation system operation within the life was done, the values of the selected criteria were obtained and inserted in the target function. The minimum of three values of the target function depending on the control program at current time defined the criterion of switching of considered static power control programs for nuclear power generation system

Probabilistic dual heuristic programming-based adaptive critic

Science.gov (United States)

Herzallah, Randa

2010-02-01

Adaptive critic (AC) methods have common roots as generalisations of dynamic programming for neural reinforcement learning approaches. Since they approximate the dynamic programming solutions, they are potentially suitable for learning in noisy, non-linear and non-stationary environments. In this study, a novel probabilistic dual heuristic programming (DHP)-based AC controller is proposed. Distinct to current approaches, the proposed probabilistic (DHP) AC method takes uncertainties of forward model and inverse controller into consideration. Therefore, it is suitable for deterministic and stochastic control problems characterised by functional uncertainty. Theoretical development of the proposed method is validated by analytically evaluating the correct value of the cost function which satisfies the Bellman equation in a linear quadratic control problem. The target value of the probabilistic critic network is then calculated and shown to be equal to the analytically derived correct value. Full derivation of the Riccati solution for this non-standard stochastic linear quadratic control problem is also provided. Moreover, the performance of the proposed probabilistic controller is demonstrated on linear and non-linear control examples.

Wellness program for anesthesiology residents: a randomized, controlled trial.

Science.gov (United States)

Saadat, H; Snow, D L; Ottenheimer, S; Dai, F; Kain, Z N

2012-10-01

Multiple reports illustrate the deleterious effects of stress on physicians' mental and physical health, as well as on patient care. This study evaluates the effects of a wellness program on anesthesiology residents' well-being. Sixty residents were randomly assigned to one of three groups: (1) wellness intervention group, (2) no-treatment control with release time, and (3) no-treatment control with routine duties. Coping, stressors, social support, psychological symptoms, and alcohol and tobacco use were measured using a pre-test-post-test design. Residents in the wellness program reported significantly fewer stressors in their role as parent, increased social support at work, greater problem-solving coping, and less anxiety as compared with one or both of the control groups. Findings related to reducing avoidance coping and alcohol consumption also were suggestive of positive intervention effects. An intervention to increase the use of active coping and social support, to reduce reliance on avoidance coping, and to decrease work and family stressors had an overall pattern of beneficial effects on residents' well-being. The importance of offering such programs during residency training, ways to strengthen intervention effectiveness, and areas for future research are discussed. © 2012 The Authors. Acta Anaesthesiologica Scandinavica © 2012 The Acta Anaesthesiologica Scandinavica Foundation.

Simulation of the control rod drop under seismic excitations. Experimental program

International Nuclear Information System (INIS)

Chaudat, Th.

2001-01-01

This paper describes the experimental program that will be performed at the end of 1998 at the CEA Saclay on a specially constructed analytical mock-up of a control rod. The purpose of these tests is to partially validate the current methodology of the drop time numerical calculations of a PWR (pressurized water reactor) control rod under seismic excitations. The French nuclear partners (EDF and FRAMATOME) are involved in this program. (author)

Realization of logical functions by vector programs

Energy Technology Data Exchange (ETDEWEB)

Lapkin, L Ya

1983-03-01

Recent computing and control applications often require program realization of finite automata in general and of an important particular class of memoryless automata specified by systems of Boolean functions. Logical control and computing machines which receive sequences of discrete signals on the input and convert them into sequences of discrete output signals using finite memory may be described by a finite automation model. However, in distinction from the circuit interpretation of finite automata, the automaton algorithm represents the structure of the automaton program and not the structure of the machine itself. Therefore, the complexity of the computer realization of an automaton is the complexity of the computer program, and not the complexity of the hardware. Two classes of programs currently used to evalute boolean functions are operator programs and binary programs. However, computing machines, including microcomputers, are equipped with additional possibilities for evaluation of Boolean functions, which are not utilized in programs of these two basic classes. In this article, we consider the design of vector programs for program realization of systems of Boolean functions. 3 references.

A combined stochastic programming and optimal control approach to personal finance and pensions

DEFF Research Database (Denmark)

Konicz, Agnieszka Karolina; Pisinger, David; Rasmussen, Kourosh Marjani

2015-01-01

The paper presents a model that combines a dynamic programming (stochastic optimal control) approach and a multi-stage stochastic linear programming approach (SLP), integrated into one SLP formulation. Stochastic optimal control produces an optimal policy that is easy to understand and implement....

Experimental control of a fluidic pinball using genetic programming

Science.gov (United States)

Raibaudo, Cedric; Zhong, Peng; Noack, Bernd R.; Martinuzzi, Robert J.

2017-11-01

The wake stabilization of a triangular cluster of three rotating cylinders was investigated in the present study. Experiments were performed at Reynolds number Re 6000, and compared with URANS-2D simulations at same flow conditions. 2D2C PIV measurements and constant temperature anemometry were used to characterize the flow without and with actuation. Open-loop actuation was first considered for the identification of particular control strategies. Machine learning control was also implemented for the experimental study. Linear genetic programming has been used for the optimization of open-loop parameters and closed-loop controllers. Considering a cost function J based on the fluctuations of the velocity measured by the hot-wire sensor, significant performances were achieved using the machine learning approach. The present work is supported by the senior author's (R. J. Martinuzzi) NSERC discovery Grant. C. Raibaudo acknowledges the financial support of the University of Calgary Eyes-High PDF program.

Quality control in screening programs for cervical cancer

International Nuclear Information System (INIS)

Sarduy Napoles, Miguel

2012-01-01

The malignancy of the cervix is one of the few locations avoidable cancers, if detected before it progresses to the infiltration. The most efficient way of early detection is through a screening program to provide women undertaking a regular and quality Pap smear. If this test results abnormal, the program offers easier access to specialized care, effective treatment, and follow-up. The objective of this article is to present usefulness of methods for quality control used in screening programs for cervical cancer to detect their inadequacies. Here are some factors and conditions that must be considered in each of the steps to take, for a cervical cancer screening program to be successful and to meet the objectives proposed in reducing mortality due to this cause. This document contains some useful indexes calculated to ensure quality throughout the process. There should be the measurement of quality throughout the screening process that allows collecting of reliable data as well as correcting deficiencies

Consideration of a Learning Programming Process based on Software Design for Beginners

OpenAIRE

大村, 基将; 紅林, 秀治

2016-01-01

We considered a learning programming process based on software design for technology education. Lessons of computer program-aided measurement and control are for beginners to learn programming. These lessons are efficient to learn the step of programming, but the main of the lessons are works of typing the sample programming and debugging. Therefore, these lessons have a fundamental lack of the concept of design. Then we considered learning processes of programming and applied the process of ...

Aquatic Plant Control Research Program. Volume A-00-1

National Research Council Canada - National Science Library

Kirk, James

2000-01-01

... at the Waterways Experiment Station. It is principally intended to be a forum whereby information pertaining to and resulting from the Corps of Engineers' nationwide Aquatic Plant Control Research Program (APCRP...

Optimal traffic control in highway transportation networks using linear programming

KAUST Repository

Li, Yanning; Canepa, Edward S.; Claudel, Christian G.

2014-01-01

of the Hamilton-Jacobi PDE, the problem of controlling the state of the system on a network link in a finite horizon can be posed as a Linear Program. Assuming all intersections in the network are controllable, we show that the optimization approach can

Discrete Globalised Dual Heuristic Dynamic Programming in Control of the Two-Wheeled Mobile Robot

OpenAIRE

Marcin Szuster; Zenon Hendzel

2014-01-01

Network-based control systems have been emerging technologies in the control of nonlinear systems over the past few years. This paper focuses on the implementation of the approximate dynamic programming algorithm in the network-based tracking control system of the two-wheeled mobile robot, Pioneer 2-DX. The proposed discrete tracking control system consists of the globalised dual heuristic dynamic programming algorithm, the PD controller, the supervisory term, and an additional control signal...

Controlling a sample changer using the integrated counting system

International Nuclear Information System (INIS)

Deacon, S.; Stevens, M.P.

1985-06-01

Control of the Sample Changer from a counting system can be achieved by using a Scaler Timer type 6255 and Sample Changer Control Interface type 6263. The interface used, however, has quite complex circuitry. The application therefore lends itself to the use of another 6000 Series module the Integrated Counting System (ICS). Using this unit control is carried out through a control program written in BASIC for the Commodore PET (or any other device with an IEEE-488 interface). The ICS then controls the sample changer through an interface unit which is relatively simple. A brief description of how ICS controls the sample changer is given. The control program is then described, firstly the running options are given, followed by a program description listing and flowchart. (author)

Controlling a sample changer using the integrated counting system

Energy Technology Data Exchange (ETDEWEB)

Deacon, S; Stevens, M P

1985-06-01

Control of the Sample Changer from a counting system can be achieved by using a Scaler Timer type 6255 and Sample Changer Control Interface type 6263. The interface used, however, has quite complex circuitry. The application therefore lends itself to the use of another 6000 Series module-the Integrated Counting System (ICS). Using this unit control is carried out through a control program written in BASIC for the Commodore PET (or any other device with an IEEE-488 interface). The ICS then controls the sample changer through an interface unit which is relatively simple. A brief description of how ICS controls the sample changer is given. The control program is then described; first the running options are given, followed by a program description listing and flowchart.

29 CFR 1209.05 - Closing of meetings; reasons therefor.

Science.gov (United States)

2010-07-01

....05 Labor Regulations Relating to Labor (Continued) NATIONAL MEDIATION BOARD PUBLIC OBSERVATION OF NATIONAL MEDIATION BOARD MEETINGS § 1209.05 Closing of meetings; reasons therefor. (a) Except where the...) (matters specifically exempted from disclosure by statute); (c)(4) (trade secrets and commercial or...

Near-Optimal Tracking Control of Mobile Robots Via Receding-Horizon Dual Heuristic Programming.

Science.gov (United States)

Lian, Chuanqiang; Xu, Xin; Chen, Hong; He, Haibo

2016-11-01

Trajectory tracking control of wheeled mobile robots (WMRs) has been an important research topic in control theory and robotics. Although various tracking control methods with stability have been developed for WMRs, it is still difficult to design optimal or near-optimal tracking controller under uncertainties and disturbances. In this paper, a near-optimal tracking control method is presented for WMRs based on receding-horizon dual heuristic programming (RHDHP). In the proposed method, a backstepping kinematic controller is designed to generate desired velocity profiles and the receding horizon strategy is used to decompose the infinite-horizon optimal control problem into a series of finite-horizon optimal control problems. In each horizon, a closed-loop tracking control policy is successively updated using a class of approximate dynamic programming algorithms called finite-horizon dual heuristic programming (DHP). The convergence property of the proposed method is analyzed and it is shown that the tracking control system based on RHDHP is asymptotically stable by using the Lyapunov approach. Simulation results on three tracking control problems demonstrate that the proposed method has improved control performance when compared with conventional model predictive control (MPC) and DHP. It is also illustrated that the proposed method has lower computational burden than conventional MPC, which is very beneficial for real-time tracking control.

Communicating program outcomes to encourage policymaker support for evidence-based state tobacco control.

Science.gov (United States)

Schmidt, Allison M; Ranney, Leah M; Goldstein, Adam O

2014-12-04

Tobacco use, the leading cause of preventable death in the U.S., can be reduced through state-level tobacco prevention and cessation programs. In the absence of research about how to communicate the need for these programs to policymakers, this qualitative study aimed to understand the motivations and priorities of policymakers in North Carolina, a state that enacted a strong tobacco control program from 2003-2011, but drastically reduced funding in recent years. Six former legislators (three Democrats, three Republicans) and three lobbyists for health organizations were interviewed about their attitudes towards tobacco use, support of state-funded programs, and reactions to two policy briefs. Five themes emerged: (1) high awareness of tobacco-related health concerns but limited awareness of program impacts and funding, (2) the primacy of economic concerns in making policy decisions, (3) ideological differences in views of the state's role in tobacco control, (4) the impact of lobbyist and constituent in-person appeals, and (5) the utility of concise, contextualized data. These findings suggest that building relationships with policymakers to communicate ongoing program outcomes, emphasizing economic data, and developing a constituent advocacy group would be valuable to encourage continued support of state tobacco control programs.

Provably Correct Control-Flow Graphs from Java Programs with Exceptions

NARCIS (Netherlands)

Amighi, A.; de Carvalho Gomes, Pedro; Huisman, Marieke

2011-01-01

We present an algorithm to extract flow graphs from Java bytecode, focusing on exceptional control flows. We prove its correctness, meaning that the behaviour of the extracted control-flow graph is an over-approximation of the behaviour of the original program. Thus any safety property that holds

Designing single phase Current-Programmed-Controlled rectifiers by harmonic currents

DEFF Research Database (Denmark)

Andersen, Gert Karmisholt; Blaabjerg, Frede

2002-01-01

The grid current harmonics of a Current-Programmed-Controlled (CPC) pfc rectifier strongly depends on the choice of switching frequency and switching inductance. This paper describes a new simple and vert fast method to calculate the grid current of a CPC controlled pfc converter. The method...

Staffing and structure of infection prevention and control programs.

Science.gov (United States)

Stone, Patricia W; Dick, Andrew; Pogorzelska, Monika; Horan, Teresa C; Furuya, E Yoko; Larson, Elaine

2009-06-01

The nature of infection prevention and control is changing; however, little is known about current staffing and structure of infection prevention and control programs. Our objectives were to provide a snapshot of the staffing and structure of hospital-based infection prevention and control programs in the United States. A Web-based survey was sent to 441 hospitals that participate in the National Healthcare Safety Network. The response rate was 66% (n = 289); data were examined on 821 professionals. Infection preventionist (IP) staffing was significantly negatively related to bed size, with higher staffing in smaller hospitals (P hospital epidemiologists were reported to have authority to close beds for outbreaks always or most of the time (n = 225, 78%). Only 32% (n = 92) reported using an electronic surveillance system to track infections. This study is the first to provide a comprehensive description of current infection prevention and control staffing, organization, and support in a select group of hospitals across the nation. Further research is needed to identify effective staffing levels for various hospital types as well as examine how the IP role is changing over time.

Object oriented programming techniques applied to device access and control

International Nuclear Information System (INIS)

Goetz, A.; Klotz, W.D.; Meyer, J.

1992-01-01

In this paper a model, called the device server model, has been presented for solving the problem of device access and control faced by all control systems. Object Oriented Programming techniques were used to achieve a powerful yet flexible solution. The model provides a solution to the problem which hides device dependancies. It defines a software framework which has to be respected by implementors of device classes - this is very useful for developing groupware. The decision to implement remote access in the root class means that device servers can be easily integrated in a distributed control system. A lot of the advantages and features of the device server model are due to the adoption of OOP techniques. The main conclusion that can be drawn from this paper is that 1. the device access and control problem is adapted to being solved with OOP techniques, 2. OOP techniques offer a distinct advantage over traditional programming techniques for solving the device access problem. (J.P.N.)

Project control support services for the National Waste Terminal Storage Program

International Nuclear Information System (INIS)

1977-12-01

The Boeing Engineering and Construction Company has the responsibility to recommend and assist in designing and implementing a project control system for the Office of Waste Isolation. BEC, after analysis of the OWI management structure and techniques utilized, has recommended the implementation of a Program Control System (PCS) for use by OWI. This system embraces the scope of management needs for visibility and control of cost and schedule performance as well as providing a framework for all the various segments of a complete program control system. Because of the schedule constraints placed on OWI by DOE it was not deemed practical to implement all segments of PCS but rather those that are basic to the concept and can return the greatest short-term benefit. The area of cost and schedule control appears to provide the greatest benefit when combined with the control room techniques for visibility and control. Technical performance is not covered in this report. The segment of PCS titled Integrated Cost/Schedule (IC/S) was used to identify those functions unique to cost and schedule control

Improvement of the quality control program of the clinical dosimeters calibration laboratory of the IPEN/CNEN-SP

Energy Technology Data Exchange (ETDEWEB)

Damatto, Willian B.; Potiens, Maria da Penha A.; Vivolo, Vitor, E-mail: wbdamatto@ipen.br, E-mail: mppotiens@ipen.br, E-mail: vivolo@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2013-07-01

A set of clinical dosimeters (thimble ionization chamber coupled to an electrometer) commonly used in radiotherapy in Brazil and sent to the Calibration Laboratory of IPEN were under several tests and analysis parameters for the dosimeters behaviour were established, specifying their sensitivities and operating characteristics. Applied tests were: repeatability, reproducibility and current leakage. Thus it was possible to determine the most common defects found in these equipment and the actions that could be taken to prevent it (clinical dosimeters quality control programs). The behaviour of 167 dosimeters was analyzed and in this study, 62 of them have been tested. The main problem detected during calibration tests was current leakage, i.e. electronic noise. The tests were applied to the routine measurements at the Calibration Laboratory implementing an ideal calibration procedure. New calibration criteria were established following international recommendations. Therefore, it was made the improvement of the quality control programme of the clinical dosimeters calibration laboratory, benefiting the users of such equipment with better consistent calibration measurements. (author)

Improvement of the quality control program of the clinical dosimeters calibration laboratory of the IPEN/CNEN-SP

International Nuclear Information System (INIS)

Damatto, Willian B.; Potiens, Maria da Penha A.; Vivolo, Vitor

2013-01-01

A set of clinical dosimeters (thimble ionization chamber coupled to an electrometer) commonly used in radiotherapy in Brazil and sent to the Calibration Laboratory of IPEN were under several tests and analysis parameters for the dosimeters behaviour were established, specifying their sensitivities and operating characteristics. Applied tests were: repeatability, reproducibility and current leakage. Thus it was possible to determine the most common defects found in these equipment and the actions that could be taken to prevent it (clinical dosimeters quality control programs). The behaviour of 167 dosimeters was analyzed and in this study, 62 of them have been tested. The main problem detected during calibration tests was current leakage, i.e. electronic noise. The tests were applied to the routine measurements at the Calibration Laboratory implementing an ideal calibration procedure. New calibration criteria were established following international recommendations. Therefore, it was made the improvement of the quality control programme of the clinical dosimeters calibration laboratory, benefiting the users of such equipment with better consistent calibration measurements. (author)

Institutional Control Program: Long Term Care and Control of Decommissioned Mine/Mill Sites Located on Crown Land

International Nuclear Information System (INIS)

Cunningham, K.

2014-01-01

Institutional Control Program: • Establishes an endpoint for mining company activities on sites located on Crown land; • Establishes funding for the long-term care and control of the closed sites; • Company responsibilities for sites under the Environmental Management and Protection Act remain; • Establishes an Institutional Control Registry; • Establishes an Institutional Control Monitoring and Maintenance Fund and an Institutional Control Unforeseen Events Fund

Strong tobacco control program requirements and secure funding are not enough: lessons from Florida.

Science.gov (United States)

Kennedy, Allison; Sullivan, Sarah; Hendlin, Yogi; Barnes, Richard; Glantz, Stanton

2012-05-01

Florida's Tobacco Pilot Program (TPP; 1998-2003), with its edgy Truth media campaign, achieved unprecedented youth smoking reductions and became a model for tobacco control programming. In 2006, 3 years after the TPP was defunded, public health groups restored funding for tobacco control programming by convincing Florida voters to amend their constitution. Despite the new program's strong legal structure, Governor Charlie Crist's Department of Health implemented a low-impact program. Although they secured the program's strong structure and funding, Florida's nongovernmental public health organizations did not mobilize to demand a high-impact program. Implementation of Florida's Amendment 4 demonstrates that a strong programmatic structure and secure funding are insufficient to ensure a successful public health program, without external pressure from nongovernmental groups.

Knowledge Gaps Impacting the Development of Bovine Viral Diarrhea Virus Control Programs in the United States

Science.gov (United States)

This paper identifies knowledge gaps that impact on the design of programs to control and or eradicate bovine viral diarrhea viruses (BVDV) in the United States. Currently there are several voluntary regional BVDV control programs in place. These control programs are aimed at the removal of animals ...

The genetic algorithm for the nonlinear programming of water pollution control system

Energy Technology Data Exchange (ETDEWEB)

Wei, J.; Zhang, J. [China University of Geosciences (China)

1999-08-01

In the programming of water pollution control system the combined method of optimization with simulation is used generally. It is not only laborious in calculation, but also the global optimum of the obtained solution is guaranteed difficult. In this paper, the genetic algorithm (GA) used in the nonlinear programming of water pollution control system is given, by which the preferred conception for the programming of waste water system is found in once-through operation. It is more succinct than the conventional method and the global optimum of the obtained solution could be ensured. 6 refs., 4 figs., 3 tabs.

Applied Behavior Analysis Is a Science And, Therefore, Progressive

Science.gov (United States)

Leaf, Justin B.; Leaf, Ronald; McEachin, John; Taubman, Mitchell; Ala'i-Rosales, Shahla; Ross, Robert K.; Smith, Tristram; Weiss, Mary Jane

2016-01-01

Applied behavior analysis (ABA) is a science and, therefore, involves progressive approaches and outcomes. In this commentary we argue that the spirit and the method of science should be maintained in order to avoid reductionist procedures, stifled innovation, and rote, unresponsive protocols that become increasingly removed from meaningful…

Spent Nuclear Fuel Project document control and Records Management Program Description

International Nuclear Information System (INIS)

MARTIN, B.M.

2000-01-01

The Spent Nuclear Fuel (SNF) Project document control and records management program, as defined within this document, is based on a broad spectrum of regulatory requirements, Department of Energy (DOE) and Project Hanford and SNF Project-specific direction and guidance. The SNF Project Execution Plan, HNF-3552, requires the control of documents and management of records under the auspices of configuration control, conduct of operations, training, quality assurance, work control, records management, data management, engineering and design control, operational readiness review, and project management and turnover. Implementation of the controls, systems, and processes necessary to ensure compliance with applicable requirements is facilitated through plans, directives, and procedures within the Project Hanford Management System (PHMS) and the SNF Project internal technical and administrative procedures systems. The documents cited within this document are those which directly establish or define the SNF Project document control and records management program. There are many peripheral documents that establish requirements and provide direction pertinent to managing specific types of documents that, for the sake of brevity and clarity, are not cited within this document

IMPLICIT DUAL CONTROL BASED ON PARTICLE FILTERING AND FORWARD DYNAMIC PROGRAMMING.

Science.gov (United States)

Bayard, David S; Schumitzky, Alan

2010-03-01

This paper develops a sampling-based approach to implicit dual control. Implicit dual control methods synthesize stochastic control policies by systematically approximating the stochastic dynamic programming equations of Bellman, in contrast to explicit dual control methods that artificially induce probing into the control law by modifying the cost function to include a term that rewards learning. The proposed implicit dual control approach is novel in that it combines a particle filter with a policy-iteration method for forward dynamic programming. The integration of the two methods provides a complete sampling-based approach to the problem. Implementation of the approach is simplified by making use of a specific architecture denoted as an H-block. Practical suggestions are given for reducing computational loads within the H-block for real-time applications. As an example, the method is applied to the control of a stochastic pendulum model having unknown mass, length, initial position and velocity, and unknown sign of its dc gain. Simulation results indicate that active controllers based on the described method can systematically improve closed-loop performance with respect to other more common stochastic control approaches.

[Analysis of the results of the SEIMC External Quality Control Program. Year 2011].

Science.gov (United States)

Ruiz de Gopegui Bordes, Enrique; Guna Serrano, M del Remedio; Orta Mira, Nieves; Ovies, María Rosario; Poveda, Marta; Gimeno Cardona, Concepción

2013-02-01

The External Quality Control Program of the Spanish Society of Infectious Diseases and Clinical Microbiology (Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica [SEIMC]) includes controls for bacteriology, serology, mycology, parasitology, mycobacteria, virology, and molecular microbiology. This article presents the most relevant conclusions and lessons from the 2011 controls. Overall, the results obtained in 2011 confirm the excellent skill and good technical standards found in previous years. Nevertheless, erroneous results can be obtained in any laboratory and in clinically relevant determinations. The results of this program highlight the need to implement both internal and external controls, such as those offered by the SEIMC program, in order to ensure maximal quality of microbiological tests. Copyright © 2013 Elsevier España, S.L. All rights reserved.

[The effects of a weight control program with competence].

Science.gov (United States)

Seo, Yeong-Mi; Suh, Sun-Lim

2007-12-01

The purpose of this study was to identify the effects of a weight control program and compliancy in overweight women. This program was composed of strategies to modify diet and exercise and to change compliance and self determination over an 8 week period. The subjects were 19 overweight women who participated in our project voluntarily. Data was collected from May 4 to June 30 of 2007. The program consisted of regular rapid walking exercise, diet, mobile phone messages and e-mail. The data was analyzed by Repeated Measures ANOVA using the SPSS WIN program. According to 3 assessment periods, there were significant differences in body weight, body mass index, and compliance. There were no significant differences in self determination. These findings suggest that more intensive interventions may be needed to demonstrate a change in self determination.

HEALS: A Faith-Based Hypertension Control and Prevention Program for African American Churches: Training of Church Leaders as Program Interventionists.

Science.gov (United States)

Dodani, Sunita; Sullivan, Debra; Pankey, Sydney; Champagne, Catherine

2011-01-01

Background. A 12-session church-based HEALS program (healthy eating and living spiritually) was developed for hypertension control and prevention program in African Americans (AAs). This study presents specifics of training lay health educators to effectively deliver HEALS to high-risk AAs. Methods. A one-day workshop was conducted by the research experts in an AA church. Five church members were recruited to be program interventionists called church health counselors (CHCs). Results. Using principles of adult education, a training protocol was developed with the intention of recognizing and supporting CHCs skills. CHCs received training on delivering HEALS program. The process of training emphasized action methods including role playing and hands-on experience with diet portion measurements. Conclusion. With adequate training, the community lay health educator can be an essential partner in a community-based hypertension control programs. This may motivate program participants more and encourages the individual to make the behavior modifications on a permanent basis.

Communicating Program Outcomes to Encourage Policymaker Support for Evidence-Based State Tobacco Control

Directory of Open Access Journals (Sweden)

Allison M. Schmidt

2014-12-01

Full Text Available Tobacco use, the leading cause of preventable death in the U.S., can be reduced through state-level tobacco prevention and cessation programs. In the absence of research about how to communicate the need for these programs to policymakers, this qualitative study aimed to understand the motivations and priorities of policymakers in North Carolina, a state that enacted a strong tobacco control program from 2003–2011, but drastically reduced funding in recent years. Six former legislators (three Democrats, three Republicans and three lobbyists for health organizations were interviewed about their attitudes towards tobacco use, support of state-funded programs, and reactions to two policy briefs. Five themes emerged: (1 high awareness of tobacco-related health concerns but limited awareness of program impacts and funding, (2 the primacy of economic concerns in making policy decisions, (3 ideological differences in views of the state’s role in tobacco control, (4 the impact of lobbyist and constituent in-person appeals, and (5 the utility of concise, contextualized data. These findings suggest that building relationships with policymakers to communicate ongoing program outcomes, emphasizing economic data, and developing a constituent advocacy group would be valuable to encourage continued support of state tobacco control programs.

Empowerment Program for People With Prediabetes: A Randomized Controlled Trial.

Science.gov (United States)

Chen, Mei-Fang; Hung, Shu-Ling; Chen, Shu-Lin

2017-04-01

Practicing a health-promoting lifestyle is believed to be effective for delaying or preventing the onset of diabetes. However, although empowerment interventions have proven effective for encouraging the adoption of a health-promoting lifestyle in people with diabetes, these interventions are rarely promoted to people with prediabetes. The aims of this study were to develop an empowerment program for people with prediabetes and to examine its efficacy in terms of the adoption of a health-promoting lifestyle and improvements in blood sugar, body mass index, and self-efficacy. A randomized controlled trial was conducted between May and December 2013. A convenience sample of people with a fasting blood sugar level of 100-125 mg/dl during the previous 3 months was recruited from the health examination center of a hospital in Kaohsiung, Taiwan. Participants were assigned to either the experimental group or the control group using block randomization with a block size of 8. The experimental group (n = 38) participated in a 4-month empowerment program (the ABC empowerment program), which encouraged participants to practice a health-promoting lifestyle in three phases: awareness raising, behavior building, and results checking. The control group (n = 40) received routine clinical care. Statistical analyses included descriptive statistics, independent t test, paired t test, and generalized estimated equations. After controlling for the differences at baseline and considering the interaction between group and time from baseline to 1 week and 3 months after completing the intervention, the generalized estimating equation showed significantly larger improvements in a health-promoting lifestyle, blood sugar, and self-efficacy in the experimental group than in the control group (p empowerment program was shown to have short-term, positive effects on behavioral, physical, and psychosocial outcomes in a Taiwan population with prediabetes. The results of this study provide a useful

Proposal of a control and quality guarantee program in radiotherapy and radiodiagnosis

International Nuclear Information System (INIS)

Tovar Rodas, J.A.

1998-01-01

In Guatemala, as regards guarantee and control of quality in the radiotherapy and radiodiagnostic areas, doesn't have until the moment, properly established, an action plan to carry out in systematic form, a program that it satisfies the design requirements and operation in an installation of this nature. However, it is well-known that the techniques that involve the employment of the ionizing radiations are powerful tools for their applications in industry, investigation and medicine; their use should be optimized and the associate risks should be evaluated to prevent them and to limit them. At the moment, the first actions of a guarantee program and quality control are carried out in the radiotherapy area for the intervention of the Secondary Laboratory of Dosimetric Calibration, but the quick growth of this area and the high number of radiodiagnosis facilities that work in the country, they outline the necessity to develop a methodology that solves the problem that is presented by the lack of controls of quality in these practices partly. The present work, presents in first plane the objectives, antecedents, forms of development, available resources and the necessities that are had in each area for the setting in march of the Quality Guarantee Program in Radiotherapy and of the Quality Control Program in Radiodiagnosis

A neo-strategic planning approach to enhance local tobacco control programs.

Science.gov (United States)

Douglas, Malinda R; Carter, Sara Sally R; Wilson, Andrew P; Chan, Andie

2015-01-01

Research in tobacco control demonstrating best practices is widely disseminated; however, application at the local level is often difficult. Translating research into practice requires a concerted effort to develop an understanding of the evidence and how it can be applied within diverse contexts. A strategic planning infrastructure was developed to support the translation of evidence-based interventions into community practice. This paper highlights the strategic process of turning "know-what" into "know-how" to facilitate the strategic planning and implementation of tobacco control best practices at the local level. The purpose, people, process, and product strategies of knowledge management and translation provided a framework for the strategic planning infrastructure. The knowledge translation concepts of audience, motivations, and mechanisms were synergized in the neo-strategic planning component design. The participants were 20 community coalitions funded to implement local tobacco control programs. From 2004 to 2011, the strategic planners facilitated a cyclical process to translate research into practice using a trio of integrated tools, skill-building workshops on strategic planning, and grantee-driven technical assistance and consultation. In the short term, the usefulness of the strategic planning components to the programs was measured. The intermediate outcome was the successful movement of the community programs from the planning stage to the implementation stage. The achievement of community-level changes in planned tobacco control efforts was the overall outcome measure for the success of the local coalitions. Seventeen of 20 communities that began the planning process implemented strategic plans. All 17 of the programs implemented evidence-based practices, resulting in numerous tobacco-free policies, increased cessation, and increased support from the media and community. Bridging the gap between research and practice can enhance the practicality

Implementation of a quality control program for a 6 MeV linear photon accelerator

International Nuclear Information System (INIS)

Berdaky, Mafalda F.; Caldas, Linda V.E.

2001-01-01

This paper describes the operational characteristics of the final process of implementation of a quality control program using routine mechanical and radiation tests. The quality control program was performed during 35 months and demonstrated the excellent stability of this accelerator. (author)

Increasing girls’ physical activity during an organised youth sport basketball program: a randomised controlled trial protocol

Science.gov (United States)

2014-01-01

Background Participation in organised youth sports (OYS) has been recommended as an opportunity to increase young peoples’ moderate-to-vigorous physical activity (MVPA) levels. Participants, however, spend a considerable proportion of time during OYS inactive. The purpose of this study, therefore, was to investigate whether coaches who attended coach education sessions (where education on increasing MVPA and decreasing inactivity during training was delivered) can increase players’ MVPA during training sessions over a 5-day basketball program compared to coaches who did not receive coach education sessions. Methods/design A convenience sample of 80 female players and 8 coaches were recruited into the UWS School Holiday Basketball Program in Greater Western Sydney, Australia. A two-arm, parallel-group randomised controlled trial was employed to investigate whether coaches who attended 2 coach education sessions (compared with a no-treatment control) can increase their players’ MVPA during training sessions over a 5-day basketball program. Objectively measured physical activity, directly observed lesson context and leader behaviour, player motivation, players’ perceived autonomy support, and coaching information (regarding training session planning, estimations on player physical activity and lesson context during training, perceived ability to modify training sessions, perceived importance of physical activity during training, intention to increase physical activity/reduce inactivity, and likelihood of increasing physical activity/reducing inactivity) were assessed at baseline (day 1) and at follow-up (day 5). Linear mixed models will be used to analyse between arm differences in changes from baseline to follow-up on all outcomes. Discussion The current trial protocol describes, to our knowledge, the first trial conducted in an OYS context to investigate the efficacy of an intervention, relative to a control, in increasing MVPA. This study’s findings will

Control of octopus arm extension by a peripheral motor program.

Science.gov (United States)

Sumbre, G; Gutfreund, Y; Fiorito, G; Flash, T; Hochner, B

2001-09-07

For goal-directed arm movements, the nervous system generates a sequence of motor commands that bring the arm toward the target. Control of the octopus arm is especially complex because the arm can be moved in any direction, with a virtually infinite number of degrees of freedom. Here we show that arm extensions can be evoked mechanically or electrically in arms whose connection with the brain has been severed. These extensions show kinematic features that are almost identical to normal behavior, suggesting that the basic motor program for voluntary movement is embedded within the neural circuitry of the arm itself. Such peripheral motor programs represent considerable simplification in the motor control of this highly redundant appendage.

Effectiveness of the home-based alcohol prevention program "In control: No alcohol!": study protocol of a randomized controlled trial

Directory of Open Access Journals (Sweden)

Verdurmen Jacqueline EE

2011-08-01

Full Text Available Abstract Background In the Netherlands, children start to drink at an early age; of the Dutch 12-year olds, 40% reports lifetime alcohol use, while 9.7% reports last-month drinking. Starting to drink at an early age puts youth at risk of developing several alcohol-related problems later in life. Recently, a home-based prevention program called "In control: No alcohol!" was developed to delay the age of alcohol onset in children. The main aim of this project is to conduct a Randomized Controlled Trial (RCT to evaluate the effectiveness of the program. Methods/Design The prevention program will be tested with an RCT among mothers and their 6 grade primary school children (11-12 years old, randomly assigned to the prevention or control condition. The program consists of five printed magazines and an activity book designed to improve parental alcohol-specific socialization. Parent-child dyads in the control group receive a factsheet information brochure, which is the standard alcohol brochure of the Trimbos Institute (the Netherlands Institute for Mental Health and Addiction. Outcome measures are initiation of alcohol use (have been drinking at least one glass of alcohol, alcohol-specific parenting, susceptibility to drinking alcohol, alcohol expectancies, self-efficacy, and frequency and intensity of child alcohol use. Questionnaires will be administered online on secured Internet webpages, with personal login codes for both mothers and children. Mothers and children in both the experimental and control condition will be surveyed at baseline and after 6, 12, and 18 months (follow-ups. Discussion The present study protocol presents the design of an RCT evaluating the effectiveness of the home-based "In control: No alcohol!" program for 6 grade primary school children (11-12 years old. It is hypothesized that children in the prevention condition will be less likely to have their first glass of alcohol, compared to the control condition. When the

Discrete Time McKean–Vlasov Control Problem: A Dynamic Programming Approach

Energy Technology Data Exchange (ETDEWEB)

Pham, Huyên, E-mail: pham@math.univ-paris-diderot.fr; Wei, Xiaoli, E-mail: tyswxl@gmail.com [Laboratoire de Probabilités et Modèles Aléatoires, CNRS, UMR 7599, Université Paris Diderot (France)

2016-12-15

We consider the stochastic optimal control problem of nonlinear mean-field systems in discrete time. We reformulate the problem into a deterministic control problem with marginal distribution as controlled state variable, and prove that dynamic programming principle holds in its general form. We apply our method for solving explicitly the mean-variance portfolio selection and the multivariate linear-quadratic McKean–Vlasov control problem.

Discrete Time McKean–Vlasov Control Problem: A Dynamic Programming Approach

International Nuclear Information System (INIS)

Pham, Huyên; Wei, Xiaoli

2016-01-01

We consider the stochastic optimal control problem of nonlinear mean-field systems in discrete time. We reformulate the problem into a deterministic control problem with marginal distribution as controlled state variable, and prove that dynamic programming principle holds in its general form. We apply our method for solving explicitly the mean-variance portfolio selection and the multivariate linear-quadratic McKean–Vlasov control problem.

Cost avoidance techniques through the Fernald controlled area trash segregation program and the RIMIA solid waste reduction program

International Nuclear Information System (INIS)

Menche, C.E.

1997-01-01

The Fernald Environmental Management Project is a Department of Energy owned facility that produced high quality uranium metals for military defense. The Fernald mission has changed from one of production to remediation. Remediation is intended to clean up legacy (primary) waste from past practices. Little opportunity is available to reduce the amount of primary waste. However, there is an opportunity to reduce secondary waste generation, primarily through segregation. Two programs which accomplish this are the Controlled Area Trash Segregation Program and the RIMIA Solid Waste Reduction Program. With these two programs now in place at the FEMP, it has been estimated that a 60% reduction has been achieved in unnecessary clean waste being disposed as Low Level Waste at the Nevada Test Site. The cost savings associated with these programs (currently 79,000 cubic feet, $428,000) could easily run into the millions of dollars based on the upcoming restoration activities to be undertaken. The segregation of non-radiological waste in the radiologically Controlled Area not only establishes a firm commitment to send only low-level radioactive waste to the Nevada Test Site, but also results in substantial cost avoidance

A randomized controlled trial of the web-based OurRelationship program: Effects on relationship and individual functioning.

Science.gov (United States)

Doss, Brian D; Cicila, Larisa N; Georgia, Emily J; Roddy, McKenzie K; Nowlan, Kathryn M; Benson, Lisa A; Christensen, Andrew

2016-04-01

Within the United States, one third of married couples are distressed and almost half of first marriages (and more than half of unmarried cohabiting relationships) end in divorce/separation. Additionally, relationship distress has been linked to mental and physical health problems in partners and their children. Although couple therapy is effective in reducing relationship distress, it is utilized by less than one third of divorcing couples. Therefore, more accessible interventions for relationship distress are needed. This study tests the efficacy of the OurRelationship program, an 8-hr online program adapted from an empirically based, in-person couple therapy. In the program, couples complete online activities and have 4 15-min calls with project staff. Nationwide, 300 heterosexual couples (N = 600 participants) participated; couples were generally representative of the US in terms of race, ethnicity, and education. Couples were randomly assigned to begin the program immediately or to a 2-month waitlist control group. Compared to the waitlist group, intervention couples reported significant improvements in relationship satisfaction (Cohen's d = 0.69), relationship confidence (d = 0.47), and negative relationship quality (d = 0.57). Additionally, couples reported significant improvements in multiple domains of individual functioning, especially when individuals began the program with difficulties in that domain: depressive (d = 0.71) and anxious symptoms (d = 0.94), perceived health (d = 0.51), work functioning (d = 0.57), and quality of life (d = 0.44). In a nationally representative sample of couples, the OurRelationship program was effective in significantly improving both relationship and individual functioning, suggesting it can substantially increase the reach of current interventions through its low-cost, Web-based format. (c) 2016 APA, all rights reserved).

The Atomic Energy Control Board's regulatory research and support program

International Nuclear Information System (INIS)

1988-04-01

The purpose of the Regulatory Research and Support Program is to augment and extend the capability of the Atomic Energy Control Board's (AECB) regulatory program beyond the capability of in-house resources. The overall objective of the program is to produce pertinent and independent scientific and other knowledge and expertise that will assist the AECB in making correct, timely and credible decisions on regulating the development, application and use of atomic energy. The objectives are achieved through contracted research, development, studies, consultant and other kinds of projects administered by the Research and Radiation Protection Branch (RRB) of the AECB

A Fully Automated Diabetes Prevention Program, Alive-PD: Program Design and Randomized Controlled Trial Protocol.

Science.gov (United States)

Block, Gladys; Azar, Kristen Mj; Block, Torin J; Romanelli, Robert J; Carpenter, Heather; Hopkins, Donald; Palaniappan, Latha; Block, Clifford H

2015-01-21

In the United States, 86 million adults have pre-diabetes. Evidence-based interventions that are both cost effective and widely scalable are needed to prevent diabetes. Our goal was to develop a fully automated diabetes prevention program and determine its effectiveness in a randomized controlled trial. Subjects with verified pre-diabetes were recruited to participate in a trial of the effectiveness of Alive-PD, a newly developed, 1-year, fully automated behavior change program delivered by email and Web. The program involves weekly tailored goal-setting, team-based and individual challenges, gamification, and other opportunities for interaction. An accompanying mobile phone app supports goal-setting and activity planning. For the trial, participants were randomized by computer algorithm to start the program immediately or after a 6-month delay. The primary outcome measures are change in HbA1c and fasting glucose from baseline to 6 months. The secondary outcome measures are change in HbA1c, glucose, lipids, body mass index (BMI), weight, waist circumference, and blood pressure at 3, 6, 9, and 12 months. Randomization and delivery of the intervention are independent of clinic staff, who are blinded to treatment assignment. Outcomes will be evaluated for the intention-to-treat and per-protocol populations. A total of 340 subjects with pre-diabetes were randomized to the intervention (n=164) or delayed-entry control group (n=176). Baseline characteristics were as follows: mean age 55 (SD 8.9); mean BMI 31.1 (SD 4.3); male 68.5%; mean fasting glucose 109.9 (SD 8.4) mg/dL; and mean HbA1c 5.6 (SD 0.3)%. Data collection and analysis are in progress. We hypothesize that participants in the intervention group will achieve statistically significant reductions in fasting glucose and HbA1c as compared to the control group at 6 months post baseline. The randomized trial will provide rigorous evidence regarding the efficacy of this Web- and Internet-based program in reducing or

Development of Computer-Aided Learning Programs on Nuclear Nonproliferation and Control

International Nuclear Information System (INIS)

Kim, Hyun Chul

2011-01-01

The fulfillment of international norms for nuclear nonproliferation is indispensable to the promotion of nuclear energy. The education and training for personnel and mangers related to the nuclear material are one of crucial factors to avoid unintended non-compliance to international norms. Korea Institute of Nuclear Nonproliferation and Control (KINAC) has been providing education and training on nuclear control as its legal duty. One of the legally mandatory educations is 'nuclear control education' performed since 2006 for the observation of the international norms on nuclear nonproliferation and the spread of the nuclear control culture. The other is 'physical protection education' performed since 2010 for maintaining the national physical protection regime effectively and the spread of the nuclear security culture. The 2010 Nuclear Security Summit was held in Washington, DC to enhance international cooperation to prevent nuclear terrorism. During the Summit, the South Korea was chosen to host the second Nuclear Summit in 2012. South Korean President announced that South Korea would share its expertise and support the Summit's mission by setting up an international education and training center on nuclear security in 2014. KINAC is making a full effort to set up the center successfully. An important function of the center is education and training in the subjects of nuclear nonproliferation, nuclear safeguards, nuclear security, and nuclear export/import control. With increasing importance of education and training education on nuclear nonproliferation and control, KINAC has been developing computer-aided learning programs on nuclear nonproliferation and control to overcome the weaknesses in classroom educations. This paper shows two learning programs. One is an e-learning system on the nuclear nonproliferation and control and the other is a virtual reality program for training nuclear material accountancy inspection of light water reactor power plants

Development of Computer-Aided Learning Programs on Nuclear Nonproliferation and Control

Energy Technology Data Exchange (ETDEWEB)

Kim, Hyun Chul [Korea Institute of Nuclear Nonproliferation and Control, Daejeon (Korea, Republic of)

2011-10-15

The fulfillment of international norms for nuclear nonproliferation is indispensable to the promotion of nuclear energy. The education and training for personnel and mangers related to the nuclear material are one of crucial factors to avoid unintended non-compliance to international norms. Korea Institute of Nuclear Nonproliferation and Control (KINAC) has been providing education and training on nuclear control as its legal duty. One of the legally mandatory educations is 'nuclear control education' performed since 2006 for the observation of the international norms on nuclear nonproliferation and the spread of the nuclear control culture. The other is 'physical protection education' performed since 2010 for maintaining the national physical protection regime effectively and the spread of the nuclear security culture. The 2010 Nuclear Security Summit was held in Washington, DC to enhance international cooperation to prevent nuclear terrorism. During the Summit, the South Korea was chosen to host the second Nuclear Summit in 2012. South Korean President announced that South Korea would share its expertise and support the Summit's mission by setting up an international education and training center on nuclear security in 2014. KINAC is making a full effort to set up the center successfully. An important function of the center is education and training in the subjects of nuclear nonproliferation, nuclear safeguards, nuclear security, and nuclear export/import control. With increasing importance of education and training education on nuclear nonproliferation and control, KINAC has been developing computer-aided learning programs on nuclear nonproliferation and control to overcome the weaknesses in classroom educations. This paper shows two learning programs. One is an e-learning system on the nuclear nonproliferation and control and the other is a virtual reality program for training nuclear material accountancy inspection of light water

A Community-Directed Integrated Strongyloides Control Program in Queensland, Australia

Directory of Open Access Journals (Sweden)

Adrian Miller

2018-05-01

Full Text Available This paper describes two phases of a community-directed intervention to address strongyloidiasis in the remote Aboriginal community of Woorabinda in central Queensland, Australia. The first phase provides the narrative of a community-driven ‘treat-and-test’ mass drug administration (MDA intervention that was co-designed by the Community Health Service and the community. The second phase is a description of the re-engagement of the community in order to disseminate the key factors for success in the previous MDA for Strongyloides stercoralis, as this information was not shared or captured in the first phase. During the first phase in 2004, there was a high prevalence of strongyloidiasis (12% faecal examination, 30% serology; n = 944 community members tested that resulted in increased morbidity and at least one death in the community. Between 2004–2005, the community worked in partnership with the Community Health Service to implement a S. stercoralis control program, where all of the residents were treated with oral ivermectin, and repeat doses were given for those with positive S. stercoralis serology. The community also developed their own health promotion campaign using locally-made resources targeting relevant environmental health problems and concerns. Ninety-two percent of the community residents participated in the program, and the prevalence of strongyloidiasis at the time of the ‘treat-and-test’ intervention was 16.6% [95% confidence interval 14.2–19.3]. The cure rate after two doses of ivermectin was 79.8%, based on pre-serology and post-serology tests. The purpose of this paper is to highlight the importance of local Aboriginal leadership and governance and a high level of community involvement in this successful mass drug administration program to address S. stercoralis. The commitment required of these leaders was demanding, and involved intense work over a period of several months. Apart from controlling strongyloidiasis

Adipocyte lipid synthesis coupled to neuronal control of thermogenic programming

Directory of Open Access Journals (Sweden)

Adilson Guilherme

2017-08-01

Conclusions: These results demonstrate that downregulation of fatty acid synthesis via FASN depletion in white adipocytes of mature mice can stimulate neuronal signaling to control thermogenic programming in iWAT.

Self-control program in the treatment of obesity.

Science.gov (United States)

Rosen, L W

1981-06-01

In a pilot study utilizing self-control techniques for the purpose of modifying the cue-reactive eating habits of obese patients, three subjects maintained a continuous weight loss throughout the first year of treatment. Techniques included goal setting, self-monitoring, brief delay and self-confrontation prior to eating unauthorized food and direct observation of oneself in a mirror when eating unauthorized food. All patients are expected to remain in treatment for the foreseeable future with no termination of the program despite apparent success with regard to control of their feeding disturbance. The rationale for this approach is discussed.

Active vibration control testing of the SPICES program: final demonstration article

Science.gov (United States)

Dunne, James P.; Jacobs, Jack H.

1996-05-01

The Synthesis and Processing of Intelligent Cost Effective Structures (SPICES) Program is a partnership program sponsored by the Advanced Research Projects Agency. The mission of the program is to develop cost effective material processing and synthesis technologies to enable new products employing active vibration suppression and control devices to be brought to market. The two year program came to fruition in 1995 through the fabrication of the final smart components and testing of an active plate combined with two trapezoidal rails, forming an active mount. Testing of the SPICES combined active mount took place at McDonnell Douglas facilities in St. Louis, MO, in October-December 1995. Approximately 15 dB reduction in overall response of a motor mounted on the active structure was achieved. Further details and results of the SPICES combined active mount demonstration testing are outlined. Results of numerous damping and control strategies that were developed and employed in the testing are presented, as well as aspects of the design and fabrication of the SPICES active mount components.

Apollo experience report: Guidance and control systems. Engineering simulation program

Science.gov (United States)

Gilbert, D. W.

1973-01-01

The Apollo Program experience from early 1962 to July 1969 with respect to the engineering-simulation support and the problems encountered is summarized in this report. Engineering simulation in support of the Apollo guidance and control system is discussed in terms of design analysis and verification, certification of hardware in closed-loop operation, verification of hardware/software compatibility, and verification of both software and procedures for each mission. The magnitude, time, and cost of the engineering simulations are described with respect to hardware availability, NASA and contractor facilities (for verification of the command module, the lunar module, and the primary guidance, navigation, and control system), and scheduling and planning considerations. Recommendations are made regarding implementation of similar, large-scale simulations for future programs.

Qualitative Assessment of Challenges in Tuberculosis Control in West Gojjam Zone, Northwest Ethiopia: Health Workers’ and Tuberculosis Control Program Coordinators’ Perspectives

Directory of Open Access Journals (Sweden)

Senedu B. Gebreegziabher

2016-01-01

Full Text Available Background. Weak health systems pose many barriers to effective tuberculosis (TB control. This study aimed at exploring health worker’s and TB control program coordinator’s perspectives on health systems challenges facing TB control in West Gojjam Zone, Amhara Region, Ethiopia. Methods. This was a qualitative descriptive study. Eight in-depth interviews with TB control program coordinators and two focus group discussions among 16 health workers were conducted. Purposive sampling was used to recruit study participants. Thematic analysis was used to identify and analyse main themes. Results. We found that intermittent interruptions of laboratory reagents and anti-TB drugs supplies, absence of trained and motivated health workers, poor TB data documentation, lack of adherence to TB treatment guideline, and lack of access to TB diagnostic tools at peripheral health institutions were challenges facing the TB control program performance in the study zone. Conclusions. Ensuring uninterrupted supply of anti-TB drugs and laboratory reagents to all health institutions is essential. Continuous refresher training of health workers on standard TB care and data handling and developing and implementing a sound retention strategy to attract and motivate health professionals to work in rural areas are necessary interventions to improve the TB control program performance in the study zone.

Discrete Globalised Dual Heuristic Dynamic Programming in Control of the Two-Wheeled Mobile Robot

Directory of Open Access Journals (Sweden)

Marcin Szuster

2014-01-01

Full Text Available Network-based control systems have been emerging technologies in the control of nonlinear systems over the past few years. This paper focuses on the implementation of the approximate dynamic programming algorithm in the network-based tracking control system of the two-wheeled mobile robot, Pioneer 2-DX. The proposed discrete tracking control system consists of the globalised dual heuristic dynamic programming algorithm, the PD controller, the supervisory term, and an additional control signal. The structure of the supervisory term derives from the stability analysis realised using the Lyapunov stability theorem. The globalised dual heuristic dynamic programming algorithm consists of two structures: the actor and the critic, realised in a form of neural networks. The actor generates the suboptimal control law, while the critic evaluates the realised control strategy by approximation of value function from the Bellman’s equation. The presented discrete tracking control system works online, the neural networks’ weights adaptation process is realised in every iteration step, and the neural networks preliminary learning procedure is not required. The performance of the proposed control system was verified by a series of computer simulations and experiments realised using the wheeled mobile robot Pioneer 2-DX.

Chemical inventory control program for mixed and hazardous waste facilities at SRS

International Nuclear Information System (INIS)

Ades, M.J.; Vincent, A.M. III.

1997-01-01

Mixed Waste (MW) and Hazardous Waste (HW) are being stored at the Savannah River Site (SRS) pending onsite and/or offsite treatment and disposal. The inventory control for these wastes has recently been brought under Technical Safety Requirements (TSR) in accordance with DOE Order 5480.22. With the TSRs was the question of the degree of rigor with which the inventory is to be tracked, considering that the variety of chemicals present, or that could be present, numbers in the hundreds. This paper describes the graded approach program to track Solid Waste (SW) inventories relative to TSRs. The approach uses a ratio of the maximum anticipated chemical inventory to the permissible inventory in accordance with Emergency Response Planning Guideline (ERPG) limits for on- and off-site receptors. A specific threshold ratio can then be determined. The chemicals above this threshold ratio are to be included in the chemical inventory control program. The chemicals that fall below the threshold ratio are managed in accordance with existing practice per State and RCRA hazardous materials requirements. Additionally, the facilities are managed in accordance with process safety management principles, specifically using process hazards analyses, which provides safety assurance for even the small quantities that may be excluded from the formal inventory control program. The method yields a practical approach to chemical inventory control, while maintaining appropriate chemical safety margins. The resulting number of specific chemicals that require inclusion in a rigorous inventory control program is greatly reduced by about 80%, thereby resulting in significant reduction in chemical data management while preserving appropriate safety margins

Medical Marijuana programs: implications for cannabis control policy--observations from Canada.

Science.gov (United States)

Fischer, Benedikt; Kuganesan, Sharan; Room, Robin

2015-01-01

While prohibition has been the dominant regime of cannabis control in most countries for decades, an increasing number of countries have been implementing cannabis control reforms recently, including decriminalization or even legalization frameworks. Canada has held out from this trend, although it has among the highest cannabis use rates in the world. Cannabis use is universally criminalized, and the current (conservative) federal government has vowed not to implement any softening reforms to cannabis control. As a result of several higher court decisions, the then federal government was forced to implement a 'medical marijuana access regulations' program in 2001 to allow severely ill patients therapeutic use and access to therapeutic cannabis while shielding them from prosecution. The program's regulations and approval processes were complex and subject to extensive criticism; initial uptake was low and most medical marijuana users continued their use and supply outside the program's auspices. This year, the government introduced new 'marijuana for medical purposes regulations', which allow physicians to 'authorize' medical marijuana use for virtually any health condition for which this is considered beneficial; supply is facilitated by licensed commercial producers. It is expected that some 500,000 users, and dozens of commercial producers will soon be approved under the program, arguably constituting - as with medical marijuana schemes elsewhere, e.g. in California--de facto 'legalization'. We discuss the question whether the evolving scope and realities of 'medical cannabis' provisions in Canada offer a 'sneaky side door' or a 'better third way' to cannabis control reform, and what the potential wider implications are of these developments. Copyright © 2014. Published by Elsevier B.V.

Dairy farmers can change: results of a five-year national mastitis control program in The Netherlands

NARCIS (Netherlands)

Jansen, J.; Schaik, van G.; Renes, R.J.; Lam, T.J.G.M.

2010-01-01

Over the years, much effort has been put into mastitis control programs. To further improve such programs, we need to understand farmers’ knowledge, attitude and behavior regarding udder health, and the way this can be influenced by mastitis control programs. This study aimed to explore the effect

Drag reduction of a car model by linear genetic programming control

Science.gov (United States)

Li, Ruiying; Noack, Bernd R.; Cordier, Laurent; Borée, Jacques; Harambat, Fabien

2017-08-01

We investigate open- and closed-loop active control for aerodynamic drag reduction of a car model. Turbulent flow around a blunt-edged Ahmed body is examined at ReH≈ 3× 105 based on body height. The actuation is performed with pulsed jets at all trailing edges (multiple inputs) combined with a Coanda deflection surface. The flow is monitored with 16 pressure sensors distributed at the rear side (multiple outputs). We apply a recently developed model-free control strategy building on genetic programming in Dracopoulos and Kent (Neural Comput Appl 6:214-228, 1997) and Gautier et al. (J Fluid Mech 770:424-441, 2015). The optimized control laws comprise periodic forcing, multi-frequency forcing and sensor-based feedback including also time-history information feedback and combinations thereof. Key enabler is linear genetic programming (LGP) as powerful regression technique for optimizing the multiple-input multiple-output control laws. The proposed LGP control can select the best open- or closed-loop control in an unsupervised manner. Approximately 33% base pressure recovery associated with 22% drag reduction is achieved in all considered classes of control laws. Intriguingly, the feedback actuation emulates periodic high-frequency forcing. In addition, the control identified automatically the only sensor which listens to high-frequency flow components with good signal to noise ratio. Our control strategy is, in principle, applicable to all multiple actuators and sensors experiments.

Design of a PLC control program for a batch plant : VHS case study 1

NARCIS (Netherlands)

Mader, A.H.; Brinksma, E.; Wupper, H.; Bauer, N.

2001-01-01

This article reports on the systematic design and validation of a PLC control program for the batch plant that has been selected as a case study for the EC project on Verification of Hybrid Systems (VHS). We show how a correct design of the control program can be obtained in an incremental manner

Design of a PLC Control Program for a Batch Plant - VHS Case Study 1

NARCIS (Netherlands)

Mader, Angelika H.; Brinksma, Hendrik; Wupper, H.; Bauer, N.

2001-01-01

This article reports on the systematic design and validation of a PLC control program for the batch plant that has been selected as a case study for the EC project on Verification of Hybrid Systems (VHS). We show how a correct design of the control program can be obtained in an incremental manner

Control programs of multichannel pulse height analyzer with CAMAC system using FACOM U-200 mini-computer

International Nuclear Information System (INIS)

Yamagishi, Kojiro

1978-02-01

The 4096 channel Pulse Height Analyzer (PHA) assembled with CAMAC plug-in units has been developed in JAERI. The PHA consists of ADC unit, CRT-display unit, and CAMAC plug-in units, which are memory-controller, MCA-timer, 4K words RAM memory and CRT-driver. The system is on-line connected to FACOM U-200 Mini-Computer through CAMAC interface unit Crate-controller. The softwares for on-line data acquisition of the system have been developed. These are four utility programs written in FORTRAN and two program packages written in assembler language FASP which are CAMAC Program Package and Basic Input/Output Program Package. CAMAC Program Package has 18 subroutine programs for control of CAMAC plug-in units from FACOM U-200 Mini-Computer; and Basic Input/Output Program Package has 26 subroutine programs to input/output data to/from a typewriter, keyboard, cassette magnetic tape and open reel magnetic tape. These subroutine programs are all FORTRAN callable. The PHA with CAMAC system is first outlined, and then usage is described in detail of four utility programs, CAMAC Program Package and Basic Input/Output Program Package. (auth.)

A measurement control program for plutonium isotopic gamma-ray systems at the Rocky Flats Plant

International Nuclear Information System (INIS)

Fleissner, J.G.

1986-01-01

A sound measurement control (MC) program should be an integral part of every nondestructive assay measurement system used for the assay of special nuclear materials. This paper describes a measurement control program for plutonium isotopic composition measurements, using high-resolution gamma-ray spectroscopy, that has been implemented in the Analytical Laboratories and the Chemistry Standards Laboratory at the Rocky Flats Plant. This MC program emphasizes the standardization of data collection procedures along with the implementation of internal and external measurement control checks to provide the requisite measurement quality assurance

Medicaid/CHIP Program; Medicaid Program and Children's Health Insurance Program (CHIP); Changes to the Medicaid Eligibility Quality Control and Payment Error Rate Measurement Programs in Response to the Affordable Care Act. Final rule.

Science.gov (United States)

2017-07-05

This final rule updates the Medicaid Eligibility Quality Control (MEQC) and Payment Error Rate Measurement (PERM) programs based on the changes to Medicaid and the Children's Health Insurance Program (CHIP) eligibility under the Patient Protection and Affordable Care Act. This rule also implements various other improvements to the PERM program.

The inception and evolution of a unique masters program in cancer biology, prevention and control.

Science.gov (United States)

Cousin, Carolyn; Blancato, Jan

2010-09-01

The University of the District of Columbia (UDC) and the Lombardi Comprehensive Cancer Center (LCCC), Georgetown University Medical Center established a Masters Degree Program in Cancer Biology, Prevention and Control at UDC that is jointly administered and taught by UDC and LCCC faculty. The goal of the Masters Degree Program is to educate students as master-level cancer professionals capable of conducting research and service in cancer biology, prevention, and control or to further advance the education of students to pursue doctoral studies. The Program's unique nature is reflected in its philosophy "the best cancer prevention and control researchers are those with a sound understanding of cancer biology". This program is a full-time, 2-year, 36-credit degree in which students take half of their coursework at UDC and half of their coursework at LCCC. During the second year, students are required to conduct research either at LCCC or UDC. Unlike most cancer biology programs, this unique Program emphasizes both cancer biology and cancer outreach training.

The influence of a behavior modification interventional program on body mass index in obese adolescents

Directory of Open Access Journals (Sweden)

Tahereh Toulabi

2012-03-01

Conclusion: The ‘‘behavior modification’’ interventional program is effective in reducing BMI in obese students, and therefore, school principals and planners can play an important role in controlling obesity by implementing this program via the students, their parents, and the school staff.

The effectiveness of a trauma-focused psycho-educational secondary prevention program for children exposed to interparental violence: study protocol for a randomized controlled trial

Directory of Open Access Journals (Sweden)

Overbeek Mathilde M

2012-02-01

Full Text Available Abstract Background Children who witness interparental violence are at a heightened risk for developing psychosocial, behavioral and cognitive problems, as well as posttraumatic stress symptoms. For these children the psycho-educational secondary prevention program 'En nu ik...!' ('It's my turn now!' has been developed. This program includes specific therapeutic factors focused on emotion awareness and expression, increasing feelings of emotional security, teaching specific coping strategies, developing a trauma narrative, improving parent-child interaction and psycho-education. The main study aim is to evaluate the effectiveness of the specific therapeutic factors in the program. A secondary objective is to study mediating and moderating factors. Methods/design This study is a prospective multicenter randomized controlled trial across cities in the Netherlands. Participants (N = 140 are referred to the secondary preventive intervention program by police, social work, women shelters and youth (mental health care. Children, aged 6-12 years, and their parents, who experienced interparental violence are randomly assigned to either the intervention program or the control program. The control program is comparable on nonspecific factors by offering positive attention, positive expectations, recreation, distraction, warmth and empathy of the therapist, and social support among group participants, in ways that are similar to the intervention program. Primary outcome measures are posttraumatic stress symptoms and emotional and behavioral problems of the child. Mediators tested are the ability to differentiate and express emotions, emotional security, coping strategies, feelings of guilt and parent-child interaction. Mental health of the parent, parenting stress, disturbances in parent-child attachment, duration and severity of the domestic violence and demographics are examined for their moderating effect. Data are collected one week before the program

[Effects of core competency support program on depression and suicidal ideation for adolescents].

Science.gov (United States)

Park, Hyun Sook

2009-12-01

The purpose of this study was to evaluate the effects of a core competency support program on depression and suicidal ideation in adolescents. A quasi-experimental design was employed in this study. Participants for the study were high school students, 27 in the experimental group and 29 in the control group. Data were analyzed using the SPSS/WIN. 14.0 program with X(2) test, t-test, and ANCOVA. Participants in the core competency support program reported decreased depression scores significantly different from those in the control group. Participants in the core competency support program reported decreased suicidal ideation scores, also significantly different from those in the control group. The core competency support program was effective in decreasing depression and suicidal ideation for adolescents. Therefore, this approach is recommended as a suicide prevention strategy for adolescents.

A computer program for controlling a university radioactive material inventory: From confusion to computer to control

International Nuclear Information System (INIS)

Robb, D.B.; Riches, C.G.; O'Brian, M.J.; Riordan, F.J.

1984-01-01

The University of Washington is a large user of radioactive material. Over 250 authorized programs are working in over 600 labs with nearly 3500 orders of radioactive material per year. The state license sets limits on the total amount of material on campus. There are also limits on sewer disposal. To meet these needs it is necessary to know the amount of material on campus at any time. A computer program was developed which covered many aspects of the radiation safety record needs including inventory control. Inventory is now managed by tracking each order from purchase to disposal. A screen menu as part of the interactive program allows immediate and detailed information about the inventory at time of purchase approval and delivery. Because of this system our knowledge and control of radionuclide work on campus has increased dramatically. A description of how this system is used during ordering, delivery and disposal will be given. Details on the methods to check limits are included along with a summary of the reports made possible by the current data files

Statistical Process Control in the Practice of Program Evaluation.

Science.gov (United States)

Posavac, Emil J.

1995-01-01

A technique developed to monitor the quality of manufactured products, statistical process control (SPC), incorporates several features that may prove attractive to evaluators. This paper reviews the history of SPC, suggests how the approach can enrich program evaluation, and illustrates its use in a hospital-based example. (SLD)

Improving bovine udder health: A national mastitis control program in the Netherlands

NARCIS (Netherlands)

Lam, T.J.G.M.; Borne, van den B.H.P.; Jansen, J.; Huijps, K.; Veersen, J.C.L.; Schaick, van G.; Hogeveen, H.

2013-01-01

Because of increasing bulk milk somatic cell counts and continuous clinical mastitis problems in a substantial number of herds, a national mastitis control program was started in 2005 to improve udder health in the Netherlands. The program started with founding the Dutch Udder Health Centre (UGCN),

Lawrence Livermore Laboratory's beryllium control program for high-explosive test firing bunkers and tables

International Nuclear Information System (INIS)

Johnson, J.S.

1980-01-01

This report on the control program to minimize beryllium levels in Laboratory workplaces includes an outline of beryllium surface, soil, and air levels and an 11-y summary of sampling results from two high-use, high-explosive test firing bunkers. These sampling data and other studies demonstrate that the beryllium control program is functioning effectively

An Electronic Workshop on the Performance Seeking Control and Propulsion Controlled Aircraft Results of the F-15 Highly Integrated Digital Electronic Control Flight Research Program

Science.gov (United States)

Powers, Sheryll Goecke (Compiler)

1995-01-01

Flight research for the F-15 HIDEC (Highly Integrated Digital Electronic Control) program was completed at NASA Dryden Flight Research Center in the fall of 1993. The flight research conducted during the last two years of the HIDEC program included two principal experiments: (1) performance seeking control (PSC), an adaptive, real-time, on-board optimization of engine, inlet, and horizontal tail position on the F-15; and (2) propulsion controlled aircraft (PCA), an augmented flight control system developed for landings as well as up-and-away flight that used only engine thrust (flight controls locked) for flight control. In September 1994, the background details and results of the PSC and PCA experiments were presented in an electronic workshop, accessible through the Dryden World Wide Web (http://www.dfrc.nasa.gov/dryden.html) and as a compact disk.

Lawrence Livermore Laboratory's beryllium control program for high-explosive test firing bunkers and tables

International Nuclear Information System (INIS)

Johnson, J.S.

1978-01-01

This detailed report on Lawrence Livermore Laboratory's control program to minimize beryllium levels in Laboratory workplaces includes an outline of beryllium surface, soil, and air levels and an 11-y summary of sampling results from two high-use, high-explosive test firing bunkers. These sampling data and other studies demonstrate that the beryllium control program is funcioning effectively

[Analysis of the results of the SEIMC External Quality Control Program. Year 2012].

Science.gov (United States)

de Gopegui Bordes, Enrique Ruiz; Guna Serrano, M del Remedio; Orta Mira, Nieves; Ovies, María Rosario; Poveda, Marta; Gimeno Cardona, Concepción

2014-02-01

The External Quality Control Program of the Spanish Society of Infectious Diseases and Clinical Microbiology (SEIMC) include controls for bacteriology, serology, mycology, parasitology, mycobacteria, virology and molecular microbiology. This article presents the most relevant conclusions and lessons from the 2012 controls. As a whole, the results obtained in 2012 confirm the excellent skill and good technical standards found in previous editions. However, erroneous results can be obtained in any laboratory and in clinically relevant determinations. Once again, the results of this program highlighted the need to implement both internal and external controls in order to assure the maximal quality of the microbiological tests. Copyright © 2014 Elsevier España, S.L. All rights reserved.

[Analysis of the results of the SEIMC External Quality Control Program. Year 2014].

Science.gov (United States)

Gopegui Bordes, Enrique Ruiz de; Guna Serrano, M Del Remedio; Orta Mira, Nieves; Medina González, Rafael; Rosario Ovies, María; Poveda, Marta; Gimeno Cardona, Concepción

2016-07-01

The External Quality Control Program of the Spanish Society of Infectious Diseases and Clinical Microbiology (SEIMC) include controls for bacteriology, serology, mycology, parasitology, mycobacteria, virology and molecular microbiology. This article presents the most relevant conclusions and lessons from the 2014 controls. As a whole, the results obtained in 2014 confirm the excellent skill and good technical standards found in previous editions. However, erroneous results can be obtained in any laboratory and in clinically relevant determinations. Once again, the results of the SEIMC program highlighted the need to implement both internal and external controls in order to assure the maximal quality of the microbiological tests. Copyright © 2016 Elsevier España, S.L.U. All rights reserved.

[Analysis of the results of the SEIMC External Quality Control Program. Year 2008].

Science.gov (United States)

Serrano, María del Remedio Guna; Mira, Nieves Orta; de Gopegui, Enrique Ruiz; Ovies, María Rosario; Cardona, Concepción Gimeno; Pérez, José L

2010-01-01

The External Quality Control Program of the Spanish Society of Infectious Diseases and Clinical Microbiology (SEIMC) include controls for bacteriology, serology, mycology, parasitology, mycobacteria and virology. This article present the most relevant conclusions and lessons from the 2008 controls. As a whole, the results obtained in 2008 confirm the excellent skill and good technical standards of the microbiology laboratories in Spain found in previous editions. However, a few deviations can be obtained in any laboratory, even in clinically relevant determinations. Once again, the results of this program highlighted the need to implement both internal an external controls in order to assure the maximal quality of the microbiological tests. 2010 Elsevier España S.L. All rights reserved.

[Analysis of the results of the SEIMC External Quality Control Program. Year 2009].

Science.gov (United States)

de Gopegui Bordes, Enrique Ruiz; del Remedio Guna Serrano, M; Orta Mira, Nieves; Ovies, María; Poveda, Marta; Gimeno Cardona, Concepción; Pérez, José L

2011-03-01

The External Quality Control Program of the Spanish Society of Infectious Diseases and Clinical Microbiology (SEIMC) includes controls for bacteriology, serology, mycology, parasitology, mycobacteria, virology and molecular microbiology. In this article, the most important conclusions and lessons from the 2009 controls are presented. As a whole, the results obtained in 2009 confirm the excellent skill and good technical standards found in previous editions. However, erroneous results can be obtained in any laboratory and in clinically relevant determinations. The results of this program highlight the need to implement both internal and external controls in order to ensure maximal quality of microbiological tests. Copyright © 2011 Elsevier España S.L. All rights reserved.

A Comparison of Types of Robot Control for Programming by Demonstration

DEFF Research Database (Denmark)

Fischer, Kerstin; Kirstein, Franziska; Jensen, Lars Christian

2016-01-01

Programming by Demonstration (PbD) is an efficient way for non-experts to teach new skills to a robot. PbD can be carried out in different ways, for instance, by kinesthetic guidance, teleoperation or by using external controls. In this paper, we compare these three ways of controlling a robot in...

School-Based Smoking Prevention Programs for Middle School Students in Nowshahr- Iran: a Randomized Controlled Trial

Directory of Open Access Journals (Sweden)

Maryam Khazaee-Pool

2016-11-01

Full Text Available Background: Smoking among youths is a main public health concern, and detecting predictors of smoking is essential for designing preventive programs. Any interventional program should plan with highlighting on behavioral change models and based on operative interventional program. So, this study aimed to investigate school-based smoking prevention programs for middle school students in Nowshahr, Iran.Materials and Methods: A quasi-experimental study was performed with 280 male students aged 15-17 years selected by multistage sampling. For this purpose, 6 middle schools were randomly recruited from male students in Nowshahr- Iran. Then, 140 students were randomly chosen for each the experimental and the control groups. After pretest, educational program based on Health Belief Model were performed in experimental group. Also, post-test was applied four months after interventional program in both experimental and control group.Results: Based on the results, the prevalence of smoking was higher at age 14 old in both experimental (38.7% and control (30 % groups. About 35% of participants in the experimental group and 33.6% in control group had smoker father. Additionally, 10% in experimental group and 7.8% in control group had smoker mother. Most main cause for smoking in 57.9% of the experimental group and 52.63% of the control group was reducing anxiety. Results also shown that there was a significant difference between students in the experimental and control groups after performing educational program in the mean scores of perceived susceptibility, perceived severity, perceived benefits, perceived barriers, perceived self-efficacy, and preventive behaviors of smoking (P < 0.05.Conclusion: By performing educational program, it was found that the prevalence of cigarette smoking was decreased in the intervention group. So, with a better understanding of factors affecting on this complex behavior (cigarette smoking, it can be a valuable phase to

A work-site weight control program using financial incentives collected through payroll deduction.

Science.gov (United States)

Forster, J L; Jeffery, R W; Sullivan, S; Snell, M K

1985-11-01

In a work-site weight control program using a self-motivational program of financial incentives implemented through payroll deduction, 131 university employees chose weight loss goals (0 to 60 lb) and incentives (+5 to +30) to be deducted from each paycheck for six months. Return of incentive money was contingent on progress toward weight goals. Participants were assigned randomly to one of four protocols, involving group educational sessions v self-instruction only and required v optional attendance at weigh-ins and sessions. Overall, dropout rates (21.4%) and mean weight loss (12.2 lb) were encouraging, especially compared with those of other work-site programs. Weight loss was positively associated with attendance at weigh-ins and educational sessions. However, requiring attendance did not increase program effectiveness and seemed also to discourage enrollment among men. The weight control program was equally effective when offered with professionally led educational sessions or when accompanied by self-instructional materials only.

Automated Generation of Formal Models from ST Control Programs for Verification Purposes

CERN Document Server

Fernandez Adiego, B; Tournier, J-C; Blanco Vinuela, E; Blech, J-O; Gonzalez Suarez, V

2014-01-01

In large industrial control systems such as the ones installed at CERN, one of the main issues is the ability to verify the correct behaviour of the Programmable Logic Controller (PLC) programs. While manual and automated testing can achieve good results, some obvious problems remain unsolved such as the difficulty to check safety or liveness properties. This paper proposes a general methodology and a tool to verify PLC programs by automatically generating formal models for different model checkers out of ST code. The proposed methodology defines an automata-based formalism used as intermediate model (IM) to transform PLC programs written in ST language into different formal models for verification purposes. A tool based on Xtext has been implemented that automatically generates models for the NuSMV and UPPAAL model checkers and the BIP framework.

Study on Production Management in Programming of Computer Numerical Control Machines

Directory of Open Access Journals (Sweden)

Gheorghe Popovici

2014-12-01

Full Text Available The paper presents the results of a study regarding the need for technology in programming for machinetools with computer-aided command. Engineering is the science of making skilled things. That is why, in the "factory of the future", programming engineering will have to realise the part processing on MU-CNCs (Computer Numerical Control Machines in the optimum economic variant. There is no "recipe" when it comes to technologies. In order to select the correct variant from among several technical variants, 10 technological requirements are forwarded for the engineer to take into account in MU-CNC programming. It is the first argued synthesis of the need for technological knowledge in MU-CNC programming.

The high beta tokamak-extended pulse magnetohydrodynamic mode control research program

International Nuclear Information System (INIS)

Maurer, D A; Bialek, J; Byrne, P J; De Bono, B; Levesque, J P; Li, B Q; Mauel, M E; Navratil, G A; Pedersen, T S; Rath, N; Shiraki, D

2011-01-01

The high beta tokamak-extended pulse (HBT-EP) magnetohydrodynamic (MHD) mode control research program is studying ITER relevant internal modular feedback control coil configurations and their impact on kink mode rigidity, advanced digital control algorithms and the effects of plasma rotation and three-dimensional magnetic fields on MHD mode stability. A new segmented adjustable conducting wall has been installed on the HBT-EP and is made up of 20 independent, movable, wall shell segments instrumented with three distinct sets of 40 saddle coils, totaling 120 in-vessel modular feedback control coils. Each internal coil set has been designed with varying toroidal angular coil coverage of 5, 10 and 15 0 , spanning the toroidal angle range of an ITER port plug based internal coil to test resistive wall mode (RWM) interaction and multimode MHD plasma response to such highly localized control fields. In addition, we have implemented 336 new poloidal and radial magnetic sensors to quantify the applied three-dimensional fields of our control coils along with the observed plasma response. This paper describes the design and implementation of the new control shell incorporating these control and sensor coils on the HBT-EP, and the research program plan on the upgraded HBT-EP to understand how best to optimize the use of modular feedback coils to control instability growth near the ideal wall stabilization limit, answer critical questions about the role of plasma rotation in active control of the RWM and the ferritic resistive wall mode, and to improve the performance of MHD control systems used in fusion experiments and future burning plasma systems.

REP activities of the conference of radiation control program directors

International Nuclear Information System (INIS)

Bevill, B.

1995-01-01

This talk provides an overview of the activities within the Conference of Radiation Control Program Directors associated with Radiological Emergency Preparedness. Included are summaries of interactions with FEMA, with US DOE, with US FDA, and with US DOT

[The development of an integrated suicide-violence prevention program for adolescents].

Science.gov (United States)

Park, Hyun Sook

2008-08-01

The purpose of this study was to develop an integrated suicide-violence prevention program for adolescents. Another purpose was to evaluate the effects of the integrated suicide-violence prevention program on self-esteem, parent-child communication, aggression, and suicidal ideation in adolescents. The study employed a quasi-experimental design. Participants for the study were high school students, 24 in the experimental group and 25 in the control group. Data was analyzed by using the SPSS/WIN. 11.5 program with chi2 test, t-test, and 2-way ANOVA. Participants in the integrated suicide-violence prevention program reported increased self-esteem scores, which was significantly different from those in the control group. Participants in the integrated suicide-violence prevention program reported decreased aggression and suicidal ideation scores, which was significantly different from those in the control group. The integrated suicide-violence prevention program was effective in improving self-esteem and decreasing aggression and suicidal ideation for adolescents. Therefore, this approach is recommended as the integrated suicide-violence prevention strategy for adolescents.

[A school program for dengue control in Honduras: from knowledge to action].

Science.gov (United States)

Avila Montes, Gustavo Adolfo; Araujo, Roxana; Leontsini, Elli; Orellana Herrera, Gabriel; Fernández Cerna, Eduardo

2012-06-01

The Environmental School Program (PEA, for its Spanish acronym), a dengue control initiative focused on primary schools that took place during 2005-2010 in several cities in Honduras, is described. The environmental health program was designed to increase knowledge and develop skills in the identification and control of Aedes aegypti breeding sites, as well as in water and solid waste management. The results, as measured by behavioral change and reduced larval indices, were satisfactory in the majority of the participating schools. The initiative involved not only children, but also their parents and teachers. In addition to reducing larval indices, PEA was successful in promoting community participation in environmental issues, particularly Aedes control. The inclusion of this educational content in the primary school curriculum in Honduras remains pending.

Software requirements specification for the program analysis and control system risk management module

International Nuclear Information System (INIS)

SCHAEFER, J.C.

1999-01-01

TWR Program Analysis and Control System Risk Module is used to facilitate specific data processes surrounding the Risk Management program of the Tank Waste Retrieval environment. This document contains the Risk Management system requirements of the database system

Radiotherapy procedures quality control program: Guidelines established by the Spanish Society of Radiotherapy and Oncology

International Nuclear Information System (INIS)

Palacios, A.; Pardo, J.; Valls, A.; Petschen, I.; Castell, A.; Villar, A.; Pedro Olive, B.A.; Munoz, V.; Fernandez, J.; Rodriguez, R.; Oton, C.

2001-01-01

The main purpose of the Royal Decree 1566/1998 of July 17 th , is to establish the quality criteria in radiation therapy in order to assure the optimisation of both radiation oncology treatments and radiation protection of the patients. According to this decree, the implementation of a quality control program in the radiation oncology departments is imperative. This program must be in writing and always available for supervision of health authorities. When necessary, modifications to improve non-optimal procedures or equipment will be made. The Spanish Society of Radiotherapy and Oncology, in order to co-operate and facilitate to all its members, set up a task force focussing on elaborating a set of guidelines that every single Radiation Oncology Department could use to develop its own quality control program. No agreements regarding equipment quality control were made by the Commission, in spite they are a part of the quality control program in radiotherapy, because it is considered that they correspond to members of other scientific societies. (author)

Control program for punched paper tape for the PDP-8/1 computer

International Nuclear Information System (INIS)

German, U.

1976-01-01

A program was developed for the PDP-8/1 computer to control the punched paper tape supplied by the measuring instruments. Any departure from the program is detected by an optical reader which stops the tape and displays the error on an accumulator. This program which is suitable for large amounts of data punched on paper tape has been in use at the Beer-Sheva laboratories for detecting errors in the sample changing operation. (B.G.)

Averaging and Linear Programming in Some Singularly Perturbed Problems of Optimal Control

Energy Technology Data Exchange (ETDEWEB)

Gaitsgory, Vladimir, E-mail: vladimir.gaitsgory@mq.edu.au [Macquarie University, Department of Mathematics (Australia); Rossomakhine, Sergey, E-mail: serguei.rossomakhine@flinders.edu.au [Flinders University, Flinders Mathematical Sciences Laboratory, School of Computer Science, Engineering and Mathematics (Australia)

2015-04-15

The paper aims at the development of an apparatus for analysis and construction of near optimal solutions of singularly perturbed (SP) optimal controls problems (that is, problems of optimal control of SP systems) considered on the infinite time horizon. We mostly focus on problems with time discounting criteria but a possibility of the extension of results to periodic optimization problems is discussed as well. Our consideration is based on earlier results on averaging of SP control systems and on linear programming formulations of optimal control problems. The idea that we exploit is to first asymptotically approximate a given problem of optimal control of the SP system by a certain averaged optimal control problem, then reformulate this averaged problem as an infinite-dimensional linear programming (LP) problem, and then approximate the latter by semi-infinite LP problems. We show that the optimal solution of these semi-infinite LP problems and their duals (that can be found with the help of a modification of an available LP software) allow one to construct near optimal controls of the SP system. We demonstrate the construction with two numerical examples.

Tuberculosis control program in the municipal context: performance evaluation

Directory of Open Access Journals (Sweden)

Tiemi Arakawa

Full Text Available ABSTRACT OBJECTIVE The objective of this study is to evaluate the performance of the Tuberculosis Control Program in municipalities of the State of São Paulo. METHODS This is a program evaluation research, with ecological design, which uses three non-hierarchical groups of the municipalities of the State of São Paulo according to their performance in relation to operational indicators. We have selected 195 municipalities with at least five new cases of tuberculosis notified in the Notification System of the State of São Paulo and with 20,000 inhabitants or more in 2010. The multiple correspondence analysis was used to identify the association between the groups of different performances, the epidemiological and demographic characteristics, and the characteristics of the health systems of the municipalities. RESULTS The group with the worst performance showed the highest rates of abandonment (average [avg] = 10.4, standard deviation [sd] = 9.4 and the lowest rates of supervision of Directly Observed Treatment (avg = 6.1, sd = 12.9, and it was associated with low incidence of tuberculosis, high tuberculosis and HIV, small population, high coverage of the Family Health Strategy/Program of Community Health Agents, and being located on the countryside. The group with the best performance presented the highest cure rate (avg = 83.7, sd = 10.5 and the highest rate of cases in Directly Observed Treatment (avg = 83.0, sd = 12.7; the group of regular performance showed regular results for outcome (avg cure = 79.8, sd = 13.2; abandonment avg = 9.5, sd = 8.3 and supervision of the Directly Observed Treatment (avg = 42.8, sd = 18.8. Large population, low coverage of the Family Health Strategy/Program of Community Health Agents, high incidence of tuberculosis and AIDS, and being located on the coast and in metropolitan areas were associated with these groups. CONCLUSIONS The findings highlight the importance of the Directly Observed Treatment in relation

The control and execution of programmed cell death

International Nuclear Information System (INIS)

Begum, R.; Pathak, N.; Hasnain, S.E.; Sah, N.K.; Athar, M.

1999-01-01

Apoptosis or programmed cell death is a highly conserved genetically controlled response of metazoan cells to commit suicide. Non apoptotic programmed cell death seems to operate in single celled eukaryotes implying that evolution of PCD has preceded the evolution of multicellularity. PCD plays a crucial role in the regulation of cellular and tissue homeostasis and any aberrations in apoptosis leads to several diseases including cancer, neurodegenerative disorders and AIDS. The mechanisms by which apoptosis is controlled are varied. In some cells, members of bcl-2 family or p53 are crucial for regulating the apoptosis programme, whereas in other cells Fas ligand is more important. bcl-2 family members have a prime role in the regulation of cell death at all stages including development, whereas cell death during development is independent of p53. bcl-2 family members being localized on the outer mitochondrial membrane, control the mitochondrial homeostasis and cytochrome c redistribution and thereby regulate the cell death process. p53 promotes DNA damage mediated cell death after growth arrest and failed DNA repair. Caspases play a key role in the execution of cell death by mediating highly specific cleavages of crucial cellular proteins collectively manifesting the apoptotic phenotype. Protein inhibitors like crm A, p35 and IAPs could prevent/control apoptosis induced by a broad array of cell death stimuli by several mechanisms specially interfering in caspase activation or caspase activity. Among endonucleases, caspase activated DNase (CAD) plays a crucial role in DNA fragmentation, a biochemical hallmark of apoptosis. As regulation of cell death seems to be as complex as regulation of cell proliferation, multiple kinase mediated regulatory mechanisms might control the apoptotic process. Thus, in spite of intensive research over the past few years, the field of apoptosis still remains fertile to unravel among others, the molecular mechanisms of cytochrome c

The control and execution of programmed cell death

Energy Technology Data Exchange (ETDEWEB)

Begum, R.; Pathak, N.; Hasnain, S.E.; Sah, N.K. [National Inst. of Immunology, New Delhi (India). Eukaryotic Gene Expression Lab.; Taneja, T.K.; Mohan, M. [National Inst. of Immunology, New Delhi (India). Eukaryotic Gene Expression Lab.]|[Dept. of Medical Elementology and Toxicology, New Delhi (India); Athar, M. [Dept. of Medical Elementology and Toxicology, New Delhi (India)

1999-07-01

Apoptosis or programmed cell death is a highly conserved genetically controlled response of metazoan cells to commit suicide. Non apoptotic programmed cell death seems to operate in single celled eukaryotes implying that evolution of PCD has preceded the evolution of multicellularity. PCD plays a crucial role in the regulation of cellular and tissue homeostasis and any aberrations in apoptosis leads to several diseases including cancer, neurodegenerative disorders and AIDS. The mechanisms by which apoptosis is controlled are varied. In some cells, members of bcl-2 family or p53 are crucial for regulating the apoptosis programme, whereas in other cells Fas ligand is more important. bcl-2 family members have a prime role in the regulation of cell death at all stages including development, whereas cell death during development is independent of p53. bcl-2 family members being localized on the outer mitochondrial membrane, control the mitochondrial homeostasis and cytochrome c redistribution and thereby regulate the cell death process. p53 promotes DNA damage mediated cell death after growth arrest and failed DNA repair. Caspases play a key role in the execution of cell death by mediating highly specific cleavages of crucial cellular proteins collectivley manifesting the apoptotic phenotype. Protein inhibitors like crm A, p35 and IAPs could prevent/control apoptosis induced by a broad array of cell death stimuli by several mechanisms specially interfering in caspase activation or caspase activity. Among endonucleases, caspase activated DNase (CAD) plays a crucial role in DNA fragmentation, a biochemical hallmark of apoptosis. As regulation of cell death seems to be as complex as regulation of cell proliferation, multiple kinase mediated regulatory mechanisms might control the apoptotic process. Thus, in spite of intensive research over the past few years, the field of apoptosis still remains fertile to unravel among others, the molecular mechanisms of cytochrome c

A 3-Year Workplace-Based Intervention Program to Control Noncommunicable Disease Risk Factors in Sousse, Tunisia.

Science.gov (United States)

Bhiri, Sana; Maatoug, Jihene; Zammit, Nawel; Msakni, Zineb; Harrabi, Imed; Amimi, Souad; Mrizek, Nejib; Ghannem, Hassen

2015-07-01

To assess the effectiveness of a 3-year workplace-based intervention program on the control of the main noncommunicable disease risk factors (poor nutrition, physical inactivity, and tobacco use) among the employees of Sousse, Tunisia. We conducted a quasi-experimental study (pre- and postassessments with intervention and control groups) in six companies of the governorate of Sousse in Tunisia.The intervention program consisted of health education programs (eg, workshops, films and open sensitization days). We also scheduled free physical activity sessions and free smoking cessation consultations. Our intervention program showed meaningful improvement among the employees toward dietary and physical activity behaviors but not for tobacco use. Workplace is a crucial setting for health promotion, and future programs should consider a multisectoral approach to control the main noncommunicable disease risk factors.

[Analysis of the results of the SEIMC External Quality Control Program. Year 2013].

Science.gov (United States)

de Gopegui Bordes, Enrique Ruiz; Orta Mira, Nieves; Del Remedio Guna Serrano, M; Medina González, Rafael; Rosario Ovies, María; Poveda, Marta; Gimeno Cardona, Concepción

2015-07-01

The External Quality Control Program of the Spanish Society of Infectious Diseases and Clinical Microbiology (SEIMC) include controls for bacteriology, serology, mycology, parasitology, mycobacteria, virology, molecular microbiology and HIV-1, HCV and HBV viral loads. This manuscript presents the analysis of results obtained of the participants from the 2013 SEIMC External Quality Control Programme, except viral loads controls, that they are summarized in a manuscript abroad. As a whole, the results obtained in 2013 confirm the excellent skill and good technical standards found in previous editions. However, erroneous results can be obtained in any laboratory and in clinically relevant determinations. Once again, the results of this program highlighted the need to implement both internal and external controls in order to assure the maximal quality of the microbiological tests. Copyright © 2015 Elsevier España, S.L.U. All rights reserved.

System level approaches for mainstreaming tobacco control into existing health programs in India: Perspectives from the field

Directory of Open Access Journals (Sweden)

Rajmohan Panda

2015-01-01

Full Text Available Introduction: India is the second largest consumer of tobacco in the world, and varieties of both smoked and smokeless tobacco products are widely available. The national program for tobacco control is run like a vertical stand-alone program. There is a lack of understanding of existing opportunities and barriers within the health programs that influence the integration of tobacco control messages into them. The present formative research identifies such opportunities and barriers. Methods: We conducted a multi-step, mixed methodological study of primary care personnel and policy-makers in two Indian states of Andhra Pradesh and Gujarat. The primary purpose of our study was to investigate health worker and policy-maker perceptions on the integration of tobacco control intervention. We systematically collected data in three steps: In Step I, we conducted in-depth interviews (IDIs and focus group discussions with primary care health personnel, Step II consists of a quantitative survey among health care providers (n = 1457 to test knowledge, attitudes and practices in tobacco control and Step III we conducted 75 IDIs with program heads and policy-makers to evaluate the relative congruence of their views on integration of the tobacco control program. Results: Majority of the health care providers recognized tobacco use as a major health problem. There was a general consensus for the need of training for effective dissemination of information from health care providers to patients. Almost 92% of the respondents opined that integration of tobacco control with other health programs will be highly effective to downscale the tobacco epidemic. Conclusions: Our findings suggest the need for integration of tobacco control program into existing health programs. Integration of tobacco control strategies into the health care system within primary and secondary care will be more effective and counseling for tobacco cessation should be available for population

Blood Pressure Control in Hypertensive Patients in the "Hiperdia Program": A Territory-Based Study

Directory of Open Access Journals (Sweden)

Clarita Silva de Souza

2014-06-01

Full Text Available Background: Systemic hypertension is highly prevalent and an important risk factor for cardiovascular events. Blood pressure control in hypertensive patients enrolled in the Hiperdia Program, a program of the Single Health System for the follow-up and monitoring of hypertensive patients, is still far below the desired level. Objective: To describe the epidemiological profile and to assess blood pressure control of patients enrolled in Hiperdia, in the city of Novo Hamburgo (State of Rio Grande do Sul, Brazil. Methods: Cross-sectional study with a stratified cluster random sample, including 383 adults enrolled in the Hiperdia Program of the 15 Basic Health Units of the city of Porto Alegre, conducted between 2010 and 2011. Controlled blood pressure was defined as ≤140 mmHg × 90 mmHg. The hypertensive patients were interviewed and their blood pressure was measured using a calibrated aneroid device. Prevalence ratios (PR with 95% confidence interval, Wald's χ2 test, and simple and multiple Poisson regression were used in the statistical analysis. Results: The mean age was 63 ± 10 years, and most of the patients were females belonging to social class C, with a low level of education, a sedentary lifestyle, and family history positive for systemic hypertension. Diabetes mellitus (DM was observed in 31%; adherence to the antihypertensive treatment in 54.3%; and 33.7% had their blood pressure controlled. DM was strongly associated with inadequate BP control, with only 15.7% of the diabetics showing BP considered as controlled. Conclusion: Even for hypertensive patients enrolled in the Hiperdia Program, BP control is not satisfactorily reached or sustained. Diabetic hypertensive patients show the most inappropriate BP control.

The Role Of Quality Assurance Program For Safety Operation Of Nuclear Installations

International Nuclear Information System (INIS)

Harjanto, N.T.; Purwadi, K.P.; Boru, D.S.; Farida; Suharni

2000-01-01

Nuclear installations expose potential hazard of radiation, therefore in their construction, operation and maintenance, it is necessary to consider safety aspect, in which the safety requirements which has been determined must be met. One of the requirements that is absolutely needed is quality assurance, which covers arrangement of quality assurance program, organization and administration of the implementation of quality assurance, and supervision. Quality Assurance program is a guideline containing quality policies and basic determination on the realization of activities that effect the quality of equipment's and items used in the operation of nuclear installations in order that the operation of nuclear installation can run safety and in accordance with their design aims and operation limits. Quality Assurance Program includes document control, design control, supply control, control of equipment s and items, operation/process control, inspection and control of equipment test, and control of nonconformance and corrections. General system of nuclear installation operation is equipped with safety and supporting systems. These systems must apply the quality assurance program that cover control of activities in the systems. In the implementation of the quality assurance program, it is necessary to establish procedures, work guidelines/instructions, and quality recording that constitutes documents of quality system 2 nd , 3 th , and 4 th level after the quality assurance program. To ensure the effectivity and to prove whether the realization of the program has been pursuant to the determined requirements, an internal audit must be conducted accordingly

Cancer Control Programs in East Asia: Evidence From the International Literature

Directory of Open Access Journals (Sweden)

Malcolm A. Moore

2014-07-01

Full Text Available Cancer is a major cause of mortality and morbidity throughout the world, including the countries of North-East and South-East Asia. Assessment of burden through cancer registration, determination of risk and protective factors, early detection and screening, clinical practice, interventions for example in vaccination, tobacco cessation efforts and palliative care all should be included in comprehensive cancer control programs. The degree to which this is possible naturally depends on the resources available at local, national and international levels. The present review concerns elements of cancer control programs established in China, Taiwan, Korea, and Japan in North-East Asia, Viet Nam, Thailand, Malaysia, and Indonesia as representative larger countries of South-East Asia for comparison, using the published literature as a guide. While major advances have been made, there are still areas which need more attention, especially in South-East Asia, and international cooperation is essential if standard guidelines are to be generated to allow effective cancer control efforts throughout the Far East.

Risk Analysis of Loblolly Pine Controlled Mass Pollination Program

Science.gov (United States)

T.D. Byram; F.E. Bridgwater

1999-01-01

The economic success of controlled mass pollination (CMP) depends both upon the value of the genetic gain obtained and the cost per seed. Crossing the best six loblolly pine (Pinus taeda) parents currently available in each deployment region of the Western Gulf Forest Tree Improvement Program will produce seed with an average additional gain in mean...

Programmed Control of Optical Grating Scales for Visual Research.

Science.gov (United States)

1980-12-01

A -AOO .9 AIR FORCE INST OF TECH WRIGHT-PATTERSON AFB OH SCHOO--ETC F/6 14/2 PROGRAMMED CONTROL OF OPTI CAL GRATING SCALES FOR VISUAL RESEARC --ETC(fl...custom system for AMRL. The cost in memory parts alone was $40,000, a good indication that the market is not over-priced. Ca-? western Reserve

[Impact of an educational institutional program in the control of the diabetic patient].

Science.gov (United States)

Mendoza-Romo, Miguel Angel; Velasco-Chávez, José Fernando; Nieva de Jesús, Rafael Natividad; Andrade-Rodríguez, Héctor de Jesús; Rodríguez-Pérez, Carlos Vicente; Palou-Fraga, Elizabeth

2013-01-01

to assess the impact of an educational institutional program in the control of type 2 diabetic patient. intervention educational study, with quasi-experimental and self-controlled subjects. A convenience non-probabilistic sample was used including 151 patients from the program for the integral care of diabetic patients. Demographic variables: gender, age, type of insurance, somatometric and metabolic profile. The assistance to a one-year length, educational program was necessary. Descriptive and inferential parametric statistics were used. 106 women and 45 men, with age range between 15 and 87 years, and with an average of 57.22 ± 11.47, were studied. A significant decrease in body mass index, waist circumference, venous glucose fasting and post-prandial values, cholesterol, systolic blood pressure, triglycerides and glycosylated hemoglobin (t Student semi-detached, p education for the control of the diabetic patient shown a favorable pattern in most of somatometric and metabolic parameters. We suggest to extend this study over a longer period to determine if the effects persist over time.

Benefits of E-Cigarettes Among Heavy Smokers Undergoing a Lung Cancer Screening Program: Randomized Controlled Trial Protocol.

Science.gov (United States)

Lucchiari, Claudio; Masiero, Marianna; Veronesi, Giulia; Maisonneuve, Patrick; Spina, Stefania; Jemos, Costantino; Omodeo Salè, Emanuela; Pravettoni, Gabriella

2016-02-03

nicotine e-cigarettes group, a nicotine-free e-cigarettes group, and a control group. The study is nested in a screening program for early lung cancer detection in heavy smokers. The study is open and is still recruiting. Stopping or reducing tobacco consumption should be a main goal of any health organization. However, traditional antismoking programs are expensive and not always effective. Therefore, favoring a partial or complete shift to e-cigarettes in heavy smokers (eg, persons at high risk for a number of diseases) could be considered a moral imperative. However, before following this path, sound and reliable data on large samples and in a variety of contexts are required. Clinicaltrials.gov NCT02422914; https://clinicaltrials.gov/ct2/show/NCT02422914 (Archived by WebCite at http://www.webcitation.org/6etwz1bPL).

Joint environmental assessment 1997--2001 of the California Department of Food and Agriculture Curly Top Virus Control Program for Bureau of Land Management and Department of Energy

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

The DOE, Naval Petroleum reserves in California (NPRC), proposes to sign an Amendment to the Cooperative Agreement and Supplement with the California Department of Food and Agriculture (CDFA) to extend the term of the Curly Top Virus Control Program (CTVCP) in California. This program involves Malathion spraying on NPRC lands to control the beet leafhopper, over a five year period from 1997 through 2001. It is expected that approximately 330 acres on Naval Petroleum Reserve Number 1 (NPR-1) and approximately 9,603 acres on Naval Petroleum Reserve Number 2 (NPR-2) will be treated with Malathion annually by CDFA during the course of this program. The actual acreage subject to treatment can vary from year to year. Pursuant to the requirements of the National Environmental Policy Act of 1969 (NEPA), as amended, the potential impacts of the proposed action were analyzed in a Joint Environmental Assessment (DOE/EA-1011) with the US Department of Interior, Bureau of Land Management (BLM) acting as lead agency, in consultation with the CDFA, and the DOE acting as a cooperating agency. Based on the analysis in the EA, DOE has determined that the conduct of the Curly Top Virus Control Program in California is not a major Federal action significantly affecting the quality of the human environment, within the meaning of the NEPA. Therefore, the preparation of an Environmental Impact Statement is not required and DOE is consequently issuing a FONSI.

Development of a Computer Program for the Integrated Control of the Fuel Homogeneity Measurement System

International Nuclear Information System (INIS)

Shin, H. S.; Jang, J. W.; Lee, Y. H.; Oh, S. J.; Park, H. D.; Kim, C. K.

2005-11-01

The computer program is developed based on Visual C++, which is equipped with a user-friendly interface of the input/output(I/O) and a display function for the measuring conditions. This program consists of three parts which are the port communication, PLC(Programmable Logic Controller) and the MCA(Multi Channel Analyzer) control parts. The communication type between the CPU of the PLC module box and the computer is selected as be the Rs-232 asynchronous type and the thread method is adapted in the development of the first part of the program. The PLC-related program has been developed so that the data communication between the PLC CPU and the computer could be harmonized with the unique commands which have already been defined in the PLC. The measuring space and time intervals, the start and end ROI(region of interest) values, and the allowable error limitation are input at each measurement in this program. Finally the controlling MCA program has been developed by using Canberra's programming library which contains several files including the head files in which the variable and the function of C++ are declared according to the MCA function. The performance test has been carried out through an application of the developed computer program to the homogeneity measurement system. The gamma counts at 28 measuring points of a fuel rod of 700 mm in length are measured for 50 sec at each point. It was revealed that the measurement results are better than the previous ones in respects of the measurement accuracy and a measurement time saving could be achieved. It was concluded that the gamma measurement system can be improved through equipping it with the developed control program

Effectiveness of Secondary Pregnancy Prevention Programs: A Meta-Analysis

Science.gov (United States)

Corcoran, Jacqueline; Pillai, Vijayan K.

2007-01-01

Because subsequent pregnancy in teen parents often worsens the impact of adolescent parenting; therefore, a common goal of teenage parent programs has been to reduce repeat pregnancy. To examine the impact of this goal, a meta-analysis was conducted on 16 control-comparison group studies that evaluated the effect of teenage pregnancy and parenting…

A worksite prevention program for construction workers: Design of a randomized controlled trial

NARCIS (Netherlands)

Oude Hengel, K.M.; Joling, C.I.; Proper, K.I.; Blatter, B.M.; Bongers, P.M.

2010-01-01

Background. A worksite prevention program was developed to promote the work ability of construction workers and thereby prolong a healthy working life. The objective of this paper is to present the design of a randomized controlled trial evaluating the effectiveness of that intervention program

Development of the Dutch Johne's disease control program supported by a simulation model

NARCIS (Netherlands)

Groenendaal, H.; Nielen, M.; Hesselink, J.W.

2003-01-01

The development of a simulation model, "JohneSSim", was part of a research program aimed at designing a national Johne's disease control program for The Netherlands. Initially, the focus was mainly directed towards different compulsory "test-and-cull" strategies. However, the results from the

National control and eradication program of bovine tuberculosis in Chile.

Science.gov (United States)

Max, Vanessa; Paredes, Luis; Rivera, Alejandro; Ternicier, Claudio

2011-07-05

There have been reports of the presence of bovine tuberculosis (TB) in Chile for more than 100 years. Several prevalence studies have revealed that there is a wide spectrum of disease across the country with certain geographic areas where the disease is endemic through to other geographic areas where infection is sporadic and at very low prevalence. In 2009, this information was used to divide Chile into different geographic zones based on prevalence rates. This will enable the correct actions to be undertaken to reduce the prevalence of TB. Thus the northern part of Chile which has a medium to high prevalence of TB will be categorized as a control zone. In contrast, the southern part of Chile which has a high proportion of the bovine population, has a low prevalence of TB and will be classified as an eradication zone (Paredes, 2008). Although there have been several past attempts to create a national control and eradication program in Chile, none has been successful. A national program is proposed, and outlined in this paper. Progress toward program initiation in 2009 has been difficult, mostly because of the global economic crisis, difficulties in the milk and meat industry, and social and political issues. Copyright © 2011 Elsevier B.V. All rights reserved.

Whys & therefores a rational look at the English language

CERN Document Server

Rutherford, William

2011-01-01

Whys & Therefores aids the reader to arrive at generalizations for the shape of the English language: words, grammar, meaning, sound and spelling. The format adopted throughout is that of a light-hearted ongoing Socratic dialogue between a mentor and a pupil. The intended effects of such activity are: awareness of what it means to 'know' a language; reliance upon native-language intuition; discovery of what one didn't know that one already 'knows' about the language; use of ungrammaticality as an investigative tool; healthy questioning of received facts about language from so-called experts; a

A program for the numerical control of a pulse increment system

Energy Technology Data Exchange (ETDEWEB)

Gray, D.C.

1963-08-21

This report will describe the important features of the development of magnetic tapes for the numerical control of a pulse-increment system consisting of a modified Gorton lathe and its associated control unit developed by L. E. Foley of Equipment Development Service, Engineering Services, General Electric Co., Schenectady, N.Y. Included is a description of CUPID (Control and Utilization of Pulse Increment Devices), a FORTRAN program for the design of these tapes on the IBM 7090 computer, and instructions for its operation.

Effectiveness of a cognitive-behavioral therapy (CBT manualized program for clinically anxious children: study protocol of a randomized controlled trial

Directory of Open Access Journals (Sweden)

Jansen Mélou

2012-03-01

Full Text Available Abstract Background In the Netherlands, the prevalence of anxiety disorders is 20%; and children with anxiety are at increased risk for psychopathology throughout adulthood. Recently, a revised version of a cognitive behavioral therapy manualized program called 'Thinking + Doing = Daring' (TDD was developed for children between 8 and 12 years old with an anxiety disorder. The main aim of this project is to conduct a Randomized Controlled Trial (RCT to evaluate the effectiveness of TDD. Methods/Design The CBT program will be tested with a RCT with 120 clinically anxious children (8-12 years old referred to one of three mental health care agencies. Children will be randomly assigned to the experimental (N = 60, TDD or to the control condition (N = 60, treatment as usual. The primary outcome measure will be the child's anxiety symptoms level. Secondary outcome measures will be externalizing (e.g. aggression and internalizing problems (e.g. depression. Two potential mediators of change will be examined in the current study: therapeutic alliance and parenting. Mother and child in both the experimental and control condition will be surveyed at baseline, post treatment and after 6 and 12 months (follow-up. It is hypothesized that children in the experimental condition will show a stronger decrease in anxiety symptoms compared to children that receive treatment as usual. Moreover, we expect that a strong therapeutic alliance and decreases in parental control and rejection will contribute to treatment success. Discussion Early treatment for anxiety problems has the potential to not only result in anxiety reductions, but also to prevent future problems such as substance abuse and psychopathology throughout adulthood. Our results will be immediately relevant to practice, since we are partnering with 'real world' community agencies. If the CBT program proves more effective than treatment as usual, it could be implemented in community mental health care

Real-time object-oriented programming: studies and proposals

International Nuclear Information System (INIS)

Fouquier, Gilles

1996-01-01

This thesis contributes to the introduction of real-time features in object-oriented programming. Object-oriented programming favours modularity and reusability. Therefore, its application to real-time introduces many theoretical and conceptual problems. To deal with these problems, a new real-time object-oriented programming model is presented. This model is based on the active object model which allows concurrence and maintains the encapsulation property. The real-time aspect is treated by replacing the concept of task by the concept of method processing and by associating a real-time constraint to each message (priority or deadline). The set of all the running methods is scheduled. This model, called ATOME, contains several sub-models to deal with the usual concurrence control integrating their priority and deadline processing. The classical HPF and EDF scheduling avoid priority or deadline inversion. This model and its variants are new proposals to program real-time applications in the object-oriented way, therefore easing reusability and code writing. The feasibility of this approach is demonstrated by extending and existing active object-based language to real-time, in using the rules defined in the ATOME model. (author) [fr

A bio-psycho-social exercise program (RÜCKGEWINN for chronic low back pain in rehabilitation aftercare - Study protocol for a randomised controlled trial

Directory of Open Access Journals (Sweden)

Pfeifer Klaus

2010-11-01

Full Text Available Abstract Background There is strong, internationally confirmed evidence for the short-term effectiveness of multimodal interdisciplinary specific treatment programs for chronic back pain. However, the verification of long-term sustainability of achieved effects is missing so far. For long-term improvement of pain and functional ability high intervention intensity or high volume seems to be necessary (> 100 therapy hours. Especially in chronic back pain rehabilitation, purposefully refined aftercare treatments offer the possibility to intensify positive effects or to increase their sustainability. However, quality assured goal-conscious specific aftercare programs for the rehabilitation of chronic back pain are absent. Methods/Design This study aims to examine the efficacy of a specially developed bio-psycho-social chronic back pain specific aftercare intervention (RÜCKGEWINN in comparison to the current usual aftercare (IRENA and a control group that is given an educational booklet addressing pain-conditioned functional ability and back pain episodes. Overall rehabilitation effects as well as predictors for compliance to the aftercare programs are analysed. Therefore, a multicenter prospective 3-armed randomised controlled trial is conducted. 456 participants will be consecutively enrolled in inpatient and outpatient rehabilitation and assigned to either one of the three study arms. Outcomes are measured before and after rehabilitation. Aftercare programs are assessed at ten month follow up after dismissal form rehabilitation. Discussion Special methodological and logistic challenges are to be mastered in this trial, which accrue from the interconnection of aftercare interventions to their residential district and the fact that the proportion of patients who take part in aftercare programs is low. The usability of the aftercare program is based on the transference into the routine care and is also reinforced by developed manuals with structured

Multiple educational programs improves glycemic control, quality of life with diminishing the impact of diabetes in poorly controlled type 1 diabetics.

Science.gov (United States)

Vyas, Chintan; Dalal, Lopa; Talaviya, Praful; Saboo, Banshi

2017-12-01

The aim of present study was to assess the outcomes of multiple educational programs on glycemic control, quality of life and impact of diabetes in poorly controlled Type 1 Diabetic patients. A 12 months diabetes education programs were conducted every week for first one month then followed by every 3 months with follow up on improvement of HbA1c and QOL in T1D patients (n=54). Clinical characteristics were recorded at baseline visit. The QOL was evaluated by 15 set DQOL questionnaires in 40 consecutive patients at baseline, 3, 6 and 12 months after education programs. The HbA1c level (%) was evaluated at same time point. Decrease in DQOL score was reported as improvement in QOL. The rate of patients response to educational programs was noted 74.07% (n=40) at end of the study (12 months). The prevalence of T1D was reported higher in men than in women. The overall DQOL score and HbA1c% level was significantly (Peducational programs. Patients exhibited greater satisfaction and diminished impact of diabetes after educational programs was observed after 3 months and it was continue up to end of study. The frequencies of self-monitoring of blood glucose were increased. Numbers of hypoglycemic and DKA events were decreased after educational programs when compared to baseline. Results of study revealed that the appropriate education and counseling diminish impact of diabetes, improve QOL and help to achieve desired glycemic (HbA1c) level in poorly control T1D patients. Copyright © 2017. Published by Elsevier Ltd.

Stochastic Control of Energy Efficient Buildings: A Semidefinite Programming Approach

Energy Technology Data Exchange (ETDEWEB)

Ma, Xiao [ORNL; Dong, Jin [ORNL; Djouadi, Seddik M [ORNL; Nutaro, James J [ORNL; Kuruganti, Teja [ORNL

2015-01-01

The key goal in energy efficient buildings is to reduce energy consumption of Heating, Ventilation, and Air- Conditioning (HVAC) systems while maintaining a comfortable temperature and humidity in the building. This paper proposes a novel stochastic control approach for achieving joint performance and power control of HVAC. We employ a constrained Stochastic Linear Quadratic Control (cSLQC) by minimizing a quadratic cost function with a disturbance assumed to be Gaussian. The problem is formulated to minimize the expected cost subject to a linear constraint and a probabilistic constraint. By using cSLQC, the problem is reduced to a semidefinite optimization problem, where the optimal control can be computed efficiently by Semidefinite programming (SDP). Simulation results are provided to demonstrate the effectiveness and power efficiency by utilizing the proposed control approach.

Policy Gradient Adaptive Dynamic Programming for Data-Based Optimal Control.

Science.gov (United States)

Luo, Biao; Liu, Derong; Wu, Huai-Ning; Wang, Ding; Lewis, Frank L

2017-10-01

The model-free optimal control problem of general discrete-time nonlinear systems is considered in this paper, and a data-based policy gradient adaptive dynamic programming (PGADP) algorithm is developed to design an adaptive optimal controller method. By using offline and online data rather than the mathematical system model, the PGADP algorithm improves control policy with a gradient descent scheme. The convergence of the PGADP algorithm is proved by demonstrating that the constructed Q -function sequence converges to the optimal Q -function. Based on the PGADP algorithm, the adaptive control method is developed with an actor-critic structure and the method of weighted residuals. Its convergence properties are analyzed, where the approximate Q -function converges to its optimum. Computer simulation results demonstrate the effectiveness of the PGADP-based adaptive control method.

Reducing Violence in Non-Controlling Ways: A Change Program Based on Self Determination Theory

Science.gov (United States)

Assor, Avi; Feinberg, Ofra; Kanat-Maymon, Yaniv; Kaplan, Haya

2018-01-01

This paper presents and examines the first school change program focusing on violence and caring based on self-determination theory (Deci & Ryan, 2012). The program aimed at promoting teachers' capacity to cope with violence and enhance caring without becoming more controlling. Comparisons of the effects of a 22-month-long program in three…

The History and Use of Cancer Registry Data by Public Health Cancer Control Programs in the United States

Science.gov (United States)

White, Mary C.; Babcock, Frances; Hayes, Nikki S.; Mariotto, Angela B.; Wong, Faye L.; Kohler, Betsy A.; Weir, Hannah K.

2018-01-01

Because cancer registry data provide a census of cancer cases, registry data can be used to: 1) define and monitor cancer incidence at the local, state, and national levels; 2) investigate patterns of cancer treatment; and 3) evaluate the effectiveness of public health efforts to prevent cancer cases and improve cancer survival. The purpose of this article is to provide a broad overview of the history of cancer surveillance programs in the United States, and illustrate the expanding ways in which cancer surveillance data are being made available and contributing to cancer control programs. The article describes the building of the cancer registry infrastructure and the successful coordination of efforts among the 2 federal agencies that support cancer registry programs, the Centers for Disease Control and Prevention and the National Cancer Institute, and the North American Association of Central Cancer Registries. The major US cancer control programs also are described, including the National Comprehensive Cancer Control Program, the National Breast and Cervical Cancer Early Detection Program, and the Colorectal Cancer Control Program. This overview illustrates how cancer registry data can inform public health actions to reduce disparities in cancer outcomes and may be instructional for a variety of cancer control professionals in the United States and in other countries. PMID:29205307

A Controlled Randomized Preliminary Trial of a Modified Dissonance-Based Eating Disorder Intervention Program.

Science.gov (United States)

Green, M A; Willis, M; Fernandez-Kong, K; Reyes, S; Linkhart, R; Johnson, M; Thorne, T; Lindberg, J; Kroska, E; Woodward, H

2017-12-01

We conducted a controlled randomized preliminary trial of a modified dissonance-based eating disorder program (n = 24) compared to an assessment-only control condition (n = 23) via a longitudinal design (baseline, postintervention, 2-month follow-up) in a community sample of women (N = 47) with clinical (n = 22) and subclinical (n = 25) eating disorder symptoms. The traditional content of the Body Project, a dissonance-based eating disorder prevention program, was modified to include verbal, written, and behavioral exercises designed to dissuade self-objectification and maladaptive social comparison. Women with clinical and subclinical symptoms were included in the target audience to investigate both the treatment and the indicated prevention utility of the modified dissonance program. Body dissatisfaction, self-esteem, self-objectification, thin-ideal internalization, maladaptive social comparison, trait anxiety, and eating disorder symptoms were evaluated in the control and the modified dissonance condition at baseline, postintervention, and 2-month follow-up. We predicted a statistically significant 2 (condition: control, modified dissonance) x 3 (time: baseline, postintervention, 2-month follow-up) interaction in the mixed factorial multivariate analyses of variance results. Results confirmed this hypothesis. Eating disorder risk factors and symptoms decreased significantly among participants in the modified dissonance condition at postintervention and 2-month follow-up compared to baseline; symptom improvement was greater among participants in the modified compared to the control condition. A secondary analysis indicated symptom improvement did not vary as a function of symptom status (clinical, subclinical), suggesting the program is efficacious in both indicated prevention and treatment applications. Results provide preliminary support for the modified dissonance program. © 2017 Wiley Periodicals, Inc.

Sound Control-Flow Graph Extraction for Java Programs with Exceptions

NARCIS (Netherlands)

Amighi, A.; de Carvalho Gomes, Pedro; Gurov, Dilian; Huisman, Marieke; Eleftherakis, George; Hinchey, Mike; Holcombe, Mike

2012-01-01

We present an algorithm to extract control-flow graphs from Java bytecode, considering exceptional flows. We then establish its correctness: the behavior of the extracted graphs is shown to be a sound over-approximation of the behavior of the original programs. Thus, any temporal safety property

Program for control and editing the output data of spiral reader

International Nuclear Information System (INIS)

Yamburenko, V.S.

1983-01-01

The program forming the magnetic tape with outpug data of Spiral Reader from that one containing initial data for computing on big computers is desribed. The program is controlled by ''operator-computer'' dialogue using the HT-340 display. During rewriting the data structure and quality are checked. Manual and automatic modes of rewriting are possible. The editing mode permits to create easily arrays of data of a given format. The magnetic tapes format and data structure are also described

Optimal control of an invasive species using a reaction-diffusion model and linear programming

Science.gov (United States)

Bonneau, Mathieu; Johnson, Fred A.; Smith, Brian J.; Romagosa, Christina M.; Martin, Julien; Mazzotti, Frank J.

2017-01-01

Managing an invasive species is particularly challenging as little is generally known about the species’ biological characteristics in its new habitat. In practice, removal of individuals often starts before the species is studied to provide the information that will later improve control. Therefore, the locations and the amount of control have to be determined in the face of great uncertainty about the species characteristics and with a limited amount of resources. We propose framing spatial control as a linear programming optimization problem. This formulation, paired with a discrete reaction-diffusion model, permits calculation of an optimal control strategy that minimizes the remaining number of invaders for a fixed cost or that minimizes the control cost for containment or protecting specific areas from invasion. We propose computing the optimal strategy for a range of possible model parameters, representing current uncertainty on the possible invasion scenarios. Then, a best strategy can be identified depending on the risk attitude of the decision-maker. We use this framework to study the spatial control of the Argentine black and white tegus (Salvator merianae) in South Florida. There is uncertainty about tegu demography and we considered several combinations of model parameters, exhibiting various dynamics of invasion. For a fixed one-year budget, we show that the risk-averse strategy, which optimizes the worst-case scenario of tegus’ dynamics, and the risk-neutral strategy, which optimizes the expected scenario, both concentrated control close to the point of introduction. A risk-seeking strategy, which optimizes the best-case scenario, focuses more on models where eradication of the species in a cell is possible and consists of spreading control as much as possible. For the establishment of a containment area, assuming an exponential growth we show that with current control methods it might not be possible to implement such a strategy for some of the

Risk Assessment on the Transition Program for Air Traffic Control Automation System Upgrade

Directory of Open Access Journals (Sweden)

Li Dong Bin

2016-01-01

Full Text Available We analyzed the safety risks of the transition program for Air Traffic Control (ATC automation system upgrade by using the event tree analysis method in this paper. We decomposed the occurrence progress of the three transition phase and built the event trees corresponding to the three stages, and then we determined the probability of success of each factor and calculated probability of success of the air traffic control automation system upgrade transition. In the conclusion, we illustrate the transition program safety risk according to the results.

Cohort Study of the Success of Controlled Weight Loss Programs for Obese Dogs.

Science.gov (United States)

German, A J; Titcomb, J M; Holden, S L; Queau, Y; Morris, P J; Biourge, V

2015-01-01

Most weight loss studies in obese dogs assess rate and percentage of weight loss in the first 2-3 months, rather than the likelihood of successfully reaching target weight. To determine outcome of controlled weight loss programs for obese dogs, and to determine the factors associated with successful completion. 143 obese dogs undergoing a controlled weight loss program. This was a cohort study of obese dogs attending a referral weight management clinic. Dogs were studied during their period of weight loss, and cases classified according to outcome as "completed" (reached target weight), "euthanized" (was euthanized before reaching target weight), or "stopped prematurely" (program stopped early for other reasons). Factors associated with successful completion were assessed using simple and multiple logistic regression. 87/143 dogs (61%) completed their weight loss program, 11 [8%] died or were euthanized, and the remaining 45 [32%] stopped prematurely. Reasons for dogs stopping prematurely included inability to contact owner, refusal to comply with weight management advice, or development of another illness. Successful weight loss was positively associated with a faster rate (P obese dogs on a controlled weight loss program reach their target weight. Future studies should better clarify reasons for success in individual cases, and also the role of factors such as activity and behavioral modification. Copyright © 2015 The Authors. Journal of Veterinary Internal Medicine published by Wiley Periodicals, Inc. on behalf of the American College of Veterinary Internal Medicine.

CONTROL: the run control program used on the WA62 VAX data acquisition system at CERN

International Nuclear Information System (INIS)

Hand, R.P.

1980-11-01

The criteria are described which have been used in the design of CONTROL, a program in the WA62 VAX Native mode data acquisition system which serves the triple purpose of driving a status display, an operator's console and a message reporter. (U.K.)

DCS-Neural-Network Program for Aircraft Control and Testing

Science.gov (United States)

Jorgensen, Charles C.

2006-01-01

A computer program implements a dynamic-cell-structure (DCS) artificial neural network that can perform such tasks as learning selected aerodynamic characteristics of an airplane from wind-tunnel test data and computing real-time stability and control derivatives of the airplane for use in feedback linearized control. A DCS neural network is one of several types of neural networks that can incorporate additional nodes in order to rapidly learn increasingly complex relationships between inputs and outputs. In the DCS neural network implemented by the present program, the insertion of nodes is based on accumulated error. A competitive Hebbian learning rule (a supervised-learning rule in which connection weights are adjusted to minimize differences between actual and desired outputs for training examples) is used. A Kohonen-style learning rule (derived from a relatively simple training algorithm, implements a Delaunay triangulation layout of neurons) is used to adjust node positions during training. Neighborhood topology determines which nodes are used to estimate new values. The network learns, starting with two nodes, and adds new nodes sequentially in locations chosen to maximize reductions in global error. At any given time during learning, the error becomes homogeneously distributed over all nodes.

Long-term outcome of a randomized controlled universal prevention trial through a positive parenting program: is it worth the effort?

Science.gov (United States)

Hahlweg, Kurt; Heinrichs, Nina; Kuschel, Annett; Bertram, Heike; Naumann, Sebastian

2010-05-16

Approximately 20% of children experience internalizing or externalizing DSM-IV-TR disorders. This prevalence rate cannot be reduced through treatment only. Effective preventive interventions are therefore urgently needed. The aim of the current investigation is to evaluate the two-year efficacy of the group Triple P parenting program administered universally for the prevention of child behavior problems. Based on their respective preschool, N = 280 families were randomly assigned either to the parent training or to the control group. The efficacy was analyzed using multi-source assessments, including questionnaires by mother and father, behavioral observation of mother-child interaction, and teacher evaluations. At the 2-year follow-up, both parents in the Triple P intervention reported significant reductions in dysfunctional parenting behavior, and mothers also an increase in positive parenting behavior. In addition, mothers reported significant reductions in internalizing and externalizing child behavior. Single-parent mothers in the Triple P intervention did not report significant changes in parenting or child problem behavior which is primarily due to inexplicable high positive effects in single parent mothers of the control group. Neither mother-child interactions nor teacher ratings yielded significant results. The results support the long-term efficacy of the Triple P - group program as a universal prevention intervention for changing parenting behavior in two-parent households, but not necessarily in single-parent mothers.

Long-term outcome of a randomized controlled universal prevention trial through a positive parenting program: is it worth the effort?

Directory of Open Access Journals (Sweden)

Bertram Heike

2010-05-01

Full Text Available Abstract Background Approximately 20% of children experience internalizing or externalizing DSM-IV-TR disorders. This prevalence rate cannot be reduced through treatment only. Effective preventive interventions are therefore urgently needed. The aim of the current investigation is to evaluate the two-year efficacy of the group Triple P parenting program administered universally for the prevention of child behavior problems. Methods Based on their respective preschool, N = 280 families were randomly assigned either to the parent training or to the control group. The efficacy was analyzed using multi-source assessments, including questionnaires by mother and father, behavioral observation of mother-child interaction, and teacher evaluations. Results At the 2-year follow-up, both parents in the Triple P intervention reported significant reductions in dysfunctional parenting behavior, and mothers also an increase in positive parenting behavior. In addition, mothers reported significant reductions in internalizing and externalizing child behavior. Single-parent mothers in the Triple P intervention did not report significant changes in parenting or child problem behavior which is primarily due to inexplicable high positive effects in single parent mothers of the control group. Neither mother-child interactions nor teacher ratings yielded significant results. Conclusions The results support the long-term efficacy of the Triple P - group program as a universal prevention intervention for changing parenting behavior in two-parent households, but not necessarily in single-parent mothers.

Liquefied gaseous fuels safety and environmental control assessment program: third status report

Energy Technology Data Exchange (ETDEWEB)

1982-03-01

This Status Report contains contributions from all contractors currently participating in the DOE Liquefied Gaseous Fuels (LG) Safety and Environmental Control Assessment Program and is presented in two principal sections. Section I is an Executive Summary of work done by all program participants. Section II is a presentation of fourteen individual reports (A through N) on specific LGF Program activities. The emphasis of Section II is on research conducted by Lawrence Livermore National Laboratory (Reports A through M). Report N, an annotated bibliography of literature related to LNG safety and environmental control, was prepared by Pacific Northwest Laboratory (PNL) as part of its LGF Safety Studies Project. Other organizations who contributed to this Status Report are Aerojet Energy Conversion Company; Applied Technology Corporation; Arthur D. Little, Incorporated; C/sub v/ International, Incorporated; Institute of Gas Technology; and Massachusetts Institute of Technology. Separate abstracts have been prepared for Reports A through N for inclusion in the Energy Data Base.

Development and demonstration program for dynamic nuclear materials control

International Nuclear Information System (INIS)

Augustson, R.H.; Baron, N.; Ford, R.F.; Ford, W.; Hagen, J.; Li, T.K.; Marshall, R.S.; Reams, V.S.; Severe, W.R.; Shirk, D.G.

1978-01-01

A significant portion of the Los Alamos Scientific Laboratory Safeguards Program is directed toward the development and demonstration of dynamic nuclear materials control. The building chosen for the demonstration system is the new Plutonium Processing Facility in Los Alamos, which houses such operations as metal-to-oxide conversion, fuel pellet fabrication, and scrap recovery. A DYnamic MAterials Control (DYMAC) system is currently being installed in the facility as an integral part of the processing operation. DYMAC is structured around interlocking unit-process accounting areas. It relies heavily on nondestructive assay measurements made in the process line to draw dynamic material balances in near real time. In conjunction with the nondestructive assay instrumentation, process operators use interactive terminals to transmit additional accounting and process information to a dedicated computer. The computer verifies and organizes the incoming data, immediately updates the inventory records, monitors material in transit using elapsed time, and alerts the Nuclear Materials Officer in the event that material balances exceed the predetermined action limits. DYMAC is part of the United States safeguards system under control of the facility operator. Because of its advanced features, the system will present a new set of inspection conditions to the IAEA, whose response is the subject of a study being sponsored by the US-IAEA Technical Assistance Program. The central issue is how the IAEA can use the increased capabilities of such a system and still maintain independent verification

Explicit/multi-parametric model predictive control (MPC) of linear discrete-time systems by dynamic and multi-parametric programming

KAUST Repository

Kouramas, K.I.

2011-08-01

This work presents a new algorithm for solving the explicit/multi- parametric model predictive control (or mp-MPC) problem for linear, time-invariant discrete-time systems, based on dynamic programming and multi-parametric programming techniques. The algorithm features two key steps: (i) a dynamic programming step, in which the mp-MPC problem is decomposed into a set of smaller subproblems in which only the current control, state variables, and constraints are considered, and (ii) a multi-parametric programming step, in which each subproblem is solved as a convex multi-parametric programming problem, to derive the control variables as an explicit function of the states. The key feature of the proposed method is that it overcomes potential limitations of previous methods for solving multi-parametric programming problems with dynamic programming, such as the need for global optimization for each subproblem of the dynamic programming step. © 2011 Elsevier Ltd. All rights reserved.

Design Challenges Encountered in a Propulsion-Controlled Aircraft Flight Test Program

Science.gov (United States)

Maine, Trindel; Burken, John; Burcham, Frank; Schaefer, Peter

1994-01-01

The NASA Dryden Flight Research Center conducted flight tests of a propulsion-controlled aircraft system on an F-15 airplane. This system was designed to explore the feasibility of providing safe emergency landing capability using only the engines to provide flight control in the event of a catastrophic loss of conventional flight controls. Control laws were designed to control the flightpath and bank angle using only commands to the throttles. Although the program was highly successful, this paper highlights some of the challenges associated with using engine thrust as a control effector. These challenges include slow engine response time, poorly modeled nonlinear engine dynamics, unmodeled inlet-airframe interactions, and difficulties with ground effect and gust rejection. Flight and simulation data illustrate these difficulties.

Components of effective randomized controlled trials of hydrotherapy programs for fibromyalgia syndrome: A systematic review.

Science.gov (United States)

Perraton, Luke; Machotka, Zuzana; Kumar, Saravana

2009-11-30

Previous systematic reviews have found hydrotherapy to be an effective management strategy for fibromyalgia syndrome (FMS). The aim of this systematic review was to summarize the components of hydrotherapy programs used in randomized controlled trials. A systematic review of randomized controlled trials was conducted. Only trials that have reported significant FMS-related outcomes were included. Data relating to the components of hydrotherapy programs (exercise type, duration, frequency and intensity, environmental factors, and service delivery) were analyzed. Eleven randomized controlled trials were included in this review. Overall, the quality of trials was good. Aerobic exercise featured in all 11 trials and the majority of hydrotherapy programs included either a strengthening or flexibility component. Great variability was noted in both the environmental components of hydrotherapy programs and service delivery. Aerobic exercise, warm up and cool-down periods and relaxation exercises are common features of hydrotherapy programs that report significant FMS-related outcomes. Treatment duration of 60 minutes, frequency of three sessions per week and an intensity equivalent to 60%-80% maximum heart rate were the most commonly reported exercise components. Exercise appears to be the most important component of an effective hydrotherapy program for FMS, particularly when considering mental health-related outcomes.

Diesel Emission Control -- Sulfur Effects (DECSE) Program; Phase I Interim Data Report No. 1

Energy Technology Data Exchange (ETDEWEB)

DOE; ORNL; NREL; EMA; MECA

1999-08-15

The Diesel Emission Control-Sulfur Effects (DECSE) is a joint government/industry program to determine the impact of diesel fuel sulfur levels on emission control systems whose use could lower emissions of nitrogen oxides (NO{sub x}) and particulate matter (PM) from on-highway trucks in the 2002--2004 model years. Phase 1 of the program was developed with the following objectives in mind: (1) evaluate the effects of varying the level of sulfur content in the fuel on the emission reduction performance of four emission control technologies; and (2) measure and compare the effects of up to 250 hours of aging on selected devices for multiple levels of fuel sulfur content. This interim data report summarizes results as of August, 1999, on the status of the test programs being conducted on three technologies: lean-NO{sub x} catalysts, diesel particulate filters and diesel oxidation catalysts.

Development and implementation of an automated quantitative film digitizer quality control program

Science.gov (United States)

Fetterly, Kenneth A.; Avula, Ramesh T. V.; Hangiandreou, Nicholas J.

1999-05-01

A semi-automated, quantitative film digitizer quality control program that is based on the computer analysis of the image data from a single digitized test film was developed. This program includes measurements of the geometric accuracy, optical density performance, signal to noise ratio, and presampled modulation transfer function. The variability of the measurements was less than plus or minus 5%. Measurements were made on a group of two clinical and two laboratory laser film digitizers during a trial period of approximately four months. Quality control limits were established based on clinical necessity, vendor specifications and digitizer performance. During the trial period, one of the digitizers failed the performance requirements and was corrected by calibration.

Air Breathing Propulsion Controls and Diagnostics Research at NASA Glenn Under NASA Aeronautics Research Mission Programs

Science.gov (United States)

Garg, Sanjay

2015-01-01

The Intelligent Control and Autonomy Branch (ICA) at NASA (National Aeronautics and Space Administration) Glenn Research Center (GRC) in Cleveland, Ohio, is leading and participating in various projects in partnership with other organizations within GRC and across NASA, the U.S. aerospace industry, and academia to develop advanced controls and health management technologies that will help meet the goals of the NASA Aeronautics Research Mission Directorate (ARMD) Programs. These efforts are primarily under the various projects under the Advanced Air Vehicles Program (AAVP), Airspace Operations and Safety Program (AOSP) and Transformative Aeronautics Concepts Program (TAC). The ICA Branch is focused on advancing the state-of-the-art of aero-engine control and diagnostics technologies to help improve aviation safety, increase efficiency, and enable operation with reduced emissions. This paper describes the various ICA research efforts under the NASA Aeronautics Research Mission Programs with a summary of motivation, background, technical approach, and recent accomplishments for each of the research tasks.

Implementing preventive chemotherapy through an integrated National Neglected Tropical Disease Control Program in Mali.

Directory of Open Access Journals (Sweden)

Massitan Dembélé

Full Text Available BACKGROUND: Mali is endemic for all five targeted major neglected tropical diseases (NTDs. As one of the five 'fast-track' countries supported with the United States Agency for International Development (USAID funds, Mali started to integrate the activities of existing disease-specific national control programs on these diseases in 2007. The ultimate objectives are to eliminate lymphatic filariasis, onchocerciasis and trachoma as public health problems and to reduce morbidity caused by schistosomiasis and soil-transmitted helminthiasis through regular treatment to eligible populations, and the specific objectives were to achieve 80% program coverage and 100% geographical coverage yearly. The paper reports on the implementation of the integrated mass drug administration and the lessons learned. METHODOLOGY/PRINCIPAL FINDINGS: The integrated control program was led by the Ministry of Health and coordinated by the national NTD Control Program. The drug packages were designed according to the disease endemicity in each district and delivered through various platforms to eligible populations involving the primary health care system. Treatment data were recorded and reported by the community drug distributors. After a pilot implementation of integrated drug delivery in three regions in 2007, the treatment for all five targeted NTDs was steadily scaled up to 100% geographical coverage by 2009, and program coverage has since been maintained at a high level: over 85% for lymphatic filariasis, over 90% for onchocerciasis and soil-transmitted helminthiasis, around 90% in school-age children for schistosomiasis, and 76-97% for trachoma. Around 10 million people have received one or more drug packages each year since 2009. No severe cases of adverse effects were reported. CONCLUSIONS/SIGNIFICANCE: Mali has scaled up the drug treatment to national coverage through integrated drug delivery involving the primary health care system. The successes and lessons

An appraisal of oak wilt control programs in Pennsylvania and West Virginia

Science.gov (United States)

Thomas W. Jones; Thomas W. Jones

1971-01-01

Attempts to control oak wilt, ranging from relatively smallscale experiments to statewide programs, have been made in many States. Among the few currently active, those of Pennsylvania and West Virginia are notable for their size and duration. The pest-control organizations of the Pennsylvania Department of Agriculture and the West Virginia Department of Agriculture...

Programming for controlling of pulse radiolysis setup. Program RADIO96

International Nuclear Information System (INIS)

Mirkowski, J.; Grodkowski, J.

1998-01-01

Program RADIO96 was written in Pascal using DELPHI 1.0 (Borland) programming platform. It can operate on IBM PC compatible computers in WINDOWS 3x or WINDOWS'95 environment. The program is dedicated to the pulse radiolysis setup based on the linear electron accelerator LAE 13/9 of the Department of Radiation Chemistry and Technology of the INCT. This work was based on apparatus and results described before and also on programming manuals of used equipment and technical data of programming platform. (author)

Impact of a nursing education program about caring for patients in Japan with malignant pleural mesothelioma on nurses' knowledge, difficulties and attitude: a randomized control trial.

Science.gov (United States)

Nagamatsu, Yasuko; Natori, Yuji; Yanai, Haruo; Horiuchi, Shigeko

2014-07-01

In Japan nursing care lags behind the growing population of patients with malignant pleural mesothelioma. This study evaluated an educational program for nurses about caring for patients with malignant pleural mesothelioma in Japan. In this randomized controlled study relative to care for malignant pleural mesothelioma, Knowledge, Difficulties and Attitude were measured at baseline, at post-test and at follow-up one month later. The two-day program with a half-day follow-up program included lectures, group work, role-playing and group discussion. 188 participants were randomly assigned to the intervention group (program, n=96) and control group (n=92; self-study by a similar content handbook). At baseline the groups showed no statistical differences in Knowledge (p=0.921), Difficulty (p=0.458) and Attitude (p=0.922). Completing the study were 177 participants yielding 88 in the intervention group and 89 in the control group. Human rights and privacy of participants were protected. The Knowledge score was significantly higher in the intervention post-test (t=14.03, p=0.000) and follow-up test (t=8.98, p=0.000). Difficulty score was significantly lower in the intervention at post-test (t=-3.41, p=0.001) and follow-up test (t=-3.70, p=0.000). The Attitude score was significantly higher in the intervention post-test (t=7.11, p=0.000) and follow-up test (t=4.54, p=0.000). The two-way analysis of variance with repeated measures on time showed an interaction between time and group; the subsequent simple main effect test found significant differences (p=0.000-0.001) between groups for after-program and at follow-up and a significant difference (p=0.000) in time only within the intervention group. The educational program was effective in improving the nurses' knowledge and attitude toward malignant pleural mesothelioma care and decreasing the difficulty in MPM care, therefore this program has potential for nurses' in-service education throughout Japan. Copyright © 2014

Gynecologic Cancer Prevention and Control in the National Comprehensive Cancer Control Program: Progress, Current Activities, and Future Directions

OpenAIRE

Stewart, Sherri L.; Lakhani, Naheed; Brown, Phaeydra M.; Larkin, O. Ann; Moore, Angela R.; Hayes, Nikki S.

2013-01-01

Gynecologic cancer confers a large burden among women in the United States. Several evidence-based interventions are available to reduce the incidence, morbidity, and mortality from these cancers. The National Comprehensive Cancer Control Program (NCCCP) is uniquely positioned to implement these interventions in the US population. This review discusses progress and future directions for the NCCCP in preventing and controlling gynecologic cancer.

Gynecologic cancer prevention and control in the National Comprehensive Cancer Control Program: progress, current activities, and future directions.

Science.gov (United States)

Stewart, Sherri L; Lakhani, Naheed; Brown, Phaeydra M; Larkin, O Ann; Moore, Angela R; Hayes, Nikki S

2013-08-01

Gynecologic cancer confers a large burden among women in the United States. Several evidence-based interventions are available to reduce the incidence, morbidity, and mortality from these cancers. The National Comprehensive Cancer Control Program (NCCCP) is uniquely positioned to implement these interventions in the US population. This review discusses progress and future directions for the NCCCP in preventing and controlling gynecologic cancer.

Fundamental attributes of a practical configuration management program for nuclear plant design control

International Nuclear Information System (INIS)

Klein, S.M.

1988-06-01

This summarizes the results of an evaluation of findings identifies during a number of Safety-System Functional Inspections and Safety System Outage Modification Inspections which are related to configuration management for nuclear plant design control. A computerized database of these findings was generated from a review of the design inspection reports. Based on the results of the evaluation, attributes of a configuration management program were developed which are responsive to minimizing these types of inspection findings. Incorporation of these key attributes is considered good practice in the development of a configuration management program for design control at operating nuclear plants

A two-step method for developing a control rod program for boiling water reactors

International Nuclear Information System (INIS)

Taner, M.S.; Levine, S.H.; Hsiao, M.Y.

1992-01-01

This paper reports on a two-step method that is established for the generation of a long-term control rod program for boiling water reactors (BWRs). The new method assumes a time-variant target power distribution in core depletion. In the new method, the BWR control rod programming is divided into two steps. In step 1, a sequence of optimal, exposure-dependent Haling power distribution profiles is generated, utilizing the spectral shift concept. In step 2, a set of exposure-dependent control rod patterns is developed by using the Haling profiles generated at step 1 as a target. The new method is implemented in a computer program named OCTOPUS. The optimization procedure of OCTOPUS is based on the method of approximation programming, in which the SIMULATE-E code is used to determine the nucleonics characteristics of the reactor core state. In a test in cycle length over a time-invariant, target Haling power distribution case because of a moderate application of spectral shift. No thermal limits of the core were violated. The gain in cycle length could be increased further by broadening the extent of the spetral shift

The Alzheimer's Association external quality control program for cerebrospinal fluid biomarkers

DEFF Research Database (Denmark)

Mattsson, Niklas; Andreasson, Ulf; Persson, Staffan

2011-01-01

. The Alzheimer's Association has initiated a global quality control program to estimate and monitor variability of measurements, quantify batch-to-batch assay variations, and identify sources of variability. In this article, we present the results from the first two rounds of the program.......The cerebrospinal fluid (CSF) biomarkers amyloid β (Aβ)-42, total-tau (T-tau), and phosphorylated-tau (P-tau) demonstrate good diagnostic accuracy for Alzheimer's disease (AD). However, there are large variations in biomarker measurements between studies, and between and within laboratories...

Adaptive dynamic programming with applications in optimal control

CERN Document Server

Liu, Derong; Wang, Ding; Yang, Xiong; Li, Hongliang

2017-01-01

This book covers the most recent developments in adaptive dynamic programming (ADP). The text begins with a thorough background review of ADP making sure that readers are sufficiently familiar with the fundamentals. In the core of the book, the authors address first discrete- and then continuous-time systems. Coverage of discrete-time systems starts with a more general form of value iteration to demonstrate its convergence, optimality, and stability with complete and thorough theoretical analysis. A more realistic form of value iteration is studied where value function approximations are assumed to have finite errors. Adaptive Dynamic Programming also details another avenue of the ADP approach: policy iteration. Both basic and generalized forms of policy-iteration-based ADP are studied with complete and thorough theoretical analysis in terms of convergence, optimality, stability, and error bounds. Among continuous-time systems, the control of affine and nonaffine nonlinear systems is studied using the ADP app...

A multi-site controlled trial of a cognitive skills program for mentally disordered offenders.

Science.gov (United States)

Rees-Jones, Angharad; Gudjonsson, Gisli; Young, Susan

2012-05-18

The effectiveness of offending behaviour programs in forensic mental health settings is not well established. Thus this study aimed to evaluate the Reasoning and Rehabilitation Mental Health program (R&R2 MHP) among a mentally disordered offender (MDO) population. A sample of 121 adult males drawn from 10 forensic mental health sites completed questionnaires at baseline and post-treatment to assess violent attitudes, locus of control, social problem-solving and anger. An informant measure of social and psychological functioning, including disruptive behaviour, was completed by unit staff at the same time. At three month follow-up patients completed again the violent attitudes and locus of control questionnaires. The data of 67 patients who participated in the group condition were compared with 54 waiting-list controls who received treatment as usual. 78% of group participants completed the program. In contrast to controls, significant treatment effects were found at outcome on self-reported measures of violent attitudes, rational problem-solving and anger cognitions. Improvements were endorsed by informant ratings of social and psychological functioning within the establishments. At follow-up significant treatment effects were found for both violent attitudes and locus of control. R&R2 MHP was effective in a sample of MDOs and had a comparatively low drop-out rate. Future research should use a randomized controlled design.

A multi-site controlled trial of a cognitive skills program for mentally disordered offenders

Directory of Open Access Journals (Sweden)

Rees-Jones Angharad

2012-05-01

Full Text Available Abstract Background The effectiveness of offending behaviour programs in forensic mental health settings is not well established. Thus this study aimed to evaluate the Reasoning and Rehabilitation Mental Health program (R&R2 MHP among a mentally disordered offender (MDO population. Methods A sample of 121 adult males drawn from 10 forensic mental health sites completed questionnaires at baseline and post-treatment to assess violent attitudes, locus of control, social problem-solving and anger. An informant measure of social and psychological functioning, including disruptive behaviour, was completed by unit staff at the same time. At three month follow-up patients completed again the violent attitudes and locus of control questionnaires. The data of 67 patients who participated in the group condition were compared with 54 waiting-list controls who received treatment as usual. Results 78% of group participants completed the program. In contrast to controls, significant treatment effects were found at outcome on self-reported measures of violent attitudes, rational problem-solving and anger cognitions. Improvements were endorsed by informant ratings of social and psychological functioning within the establishments. At follow-up significant treatment effects were found for both violent attitudes and locus of control. Conclusions R&R2 MHP was effective in a sample of MDOs and had a comparatively low drop-out rate. Future research should use a randomized controlled design.

Optimal traffic control in highway transportation networks using linear programming

KAUST Repository

Li, Yanning

2014-06-01

This article presents a framework for the optimal control of boundary flows on transportation networks. The state of the system is modeled by a first order scalar conservation law (Lighthill-Whitham-Richards PDE). Based on an equivalent formulation of the Hamilton-Jacobi PDE, the problem of controlling the state of the system on a network link in a finite horizon can be posed as a Linear Program. Assuming all intersections in the network are controllable, we show that the optimization approach can be extended to an arbitrary transportation network, preserving linear constraints. Unlike previously investigated transportation network control schemes, this framework leverages the intrinsic properties of the Halmilton-Jacobi equation, and does not require any discretization or boolean variables on the link. Hence this framework is very computational efficient and provides the globally optimal solution. The feasibility of this framework is illustrated by an on-ramp metering control example.

Material protection control and accounting program activities at the Urals electrochemical integrated plant

International Nuclear Information System (INIS)

McAllister, S.

1997-01-01

The Urals Electrochemical Integrated Plant (UEIP) is the Russian Federation's largest uranium enrichment plant and one of three sites in Russia blending high enriched uranium (HEU) into commercial grade low enriched uranium. UEIP is located approximately 70 km north of Yekaterinburg in the closed city of Novouralsk (formerly Sverdlovsk- 44). DOE's MPC ampersand A program first met with UEIP in June of 1996, however because of some contractual issues the work did not start until September of 1997. The six national laboratories participating in DOE's Material Protection Control and Accounting program are cooperating with UEIP to enhance the capabilities of the physical protection, access control, and nuclear material control and accounting systems. The MPC ampersand A work at UEIP is expected to be completed during fiscal year 2001

Model for RHIC ramp controls

International Nuclear Information System (INIS)

Kewisch, J.; Mane, V.; Clifford, T.; Hartmann, H.; Kahn, T.; Oerter, B.; Peggs, S.

1994-01-01

This paper introduces the hardware and software concepts for the implementation of the ramp controls. The hardware part of the ramp controls consists of a number of multi-purpose Wave Form Generators (WFGS) which control the settings of accelerator hardware directly or indirectly by controlling their WFG. A Real Time Data Link (RTDL) data transfer system connects the WFGs in a three layer architecture. To the usual two layers which generate an independent timing signal and dependent set points, respectively, an intermediate layer is added which produces accelerator parameters such as the magnet strength. The task of the bottom layer is therefore reduced to the function of implementing those parameters. This architecture de-couples two independent functions which axe normally folded together. The function of the hardware becomes modular and easily maintainable. The ramp control software is layered in the same way. Between the top layer (the ramp procedure application program) and the bottom layer (the hardware interface) an additional layer of ''manager'' programs allow operation of accelerator subsystems

The Results of a Randomized Control Trial Evaluation of the SPARK Literacy Program

Science.gov (United States)

Jones, Curtis J.; Christian, Michael; Rice, Andrew

2016-01-01

The purpose of this report is to present the results of a two-year randomized control trial evaluation of the SPARK literacy program. SPARK is an early grade literacy program developed by Boys & Girls Clubs of Greater Milwaukee. In 2010, SPARK was awarded an Investing in Innovation (i3) Department of Education grant to further develop the…

Air-Breathing Hypersonic Vehicle Tracking Control Based on Adaptive Dynamic Programming.

Science.gov (United States)

Mu, Chaoxu; Ni, Zhen; Sun, Changyin; He, Haibo

2017-03-01

In this paper, we propose a data-driven supplementary control approach with adaptive learning capability for air-breathing hypersonic vehicle tracking control based on action-dependent heuristic dynamic programming (ADHDP). The control action is generated by the combination of sliding mode control (SMC) and the ADHDP controller to track the desired velocity and the desired altitude. In particular, the ADHDP controller observes the differences between the actual velocity/altitude and the desired velocity/altitude, and then provides a supplementary control action accordingly. The ADHDP controller does not rely on the accurate mathematical model function and is data driven. Meanwhile, it is capable to adjust its parameters online over time under various working conditions, which is very suitable for hypersonic vehicle system with parameter uncertainties and disturbances. We verify the adaptive supplementary control approach versus the traditional SMC in the cruising flight, and provide three simulation studies to illustrate the improved performance with the proposed approach.

Availability of tobacco cessation services in substance use disorder treatment programs: Impact of state tobacco control policy.

Science.gov (United States)

Abraham, Amanda J; Bagwell-Adams, Grace; Jayawardhana, Jayani

2017-08-01

Given the high prevalence of smoking among substance use disorder (SUD) patients, the specialty SUD treatment system is an important target for adoption and implementation of tobacco cessation (TC) services. While research has addressed the impact of tobacco control on individual tobacco consumption, largely overlooked in the literature is the potential impact of state tobacco control policies on availability of services for tobacco cessation. This paper examines the association between state tobacco control policy and availability of TC services in SUD treatment programs in the United States. State tobacco control and state demographic data (n=51) were merged with treatment program data from the 2012 National Survey of Substance Abuse Treatment Services (n=10.413) to examine availability of TC screening, counseling and pharmacotherapy services in SUD treatment programs using multivariate logistic regression models clustered at the state-level. Approximately 60% of SUD treatment programs offered TC screening services, 41% offered TC counseling services and 26% offered TC pharmacotherapy services. Results of multivariate logistic regression showed the odds of offering TC services were greater for SUD treatment programs located in states with higher cigarette excise taxes and greater spending on tobacco prevention and control. Findings indicate cigarette excise taxes and recommended funding levels may be effective policy tools for increasing access to TC services in SUD treatment programs. Coupled with changes to insurance coverage for TC under the Affordable Care Act, state tobacco control policy tools may further reduce tobacco use in the United States. Published by Elsevier Ltd.

Effectiveness of Comprehensive Tobacco Control Programs in Reducing Teenage Smoking: A Review

OpenAIRE

Wakefield, Melanie A PhD; Chaloupka, Frank J. PhD

1999-01-01

This review focuses on the extent to which comprehensive, statewide, tobacco control programs in the United States have induced change in teenage smoking or made progress towards this goal and under what circumstances such programs are likely to be most effective. The sources for this review include published journal articles, reports and documents, rather than any primary data analysis. We review evidence for the extent to which individual strategies that comprise a comprehensive tobacco con...

A Recourse-Based Type-2 Fuzzy Programming Method for Water Pollution Control under Uncertainty

Directory of Open Access Journals (Sweden)

Jing Liu

2017-11-01

Full Text Available In this study, a recourse-based type-2 fuzzy programming (RTFP method is developed for supporting water pollution control of basin systems under uncertainty. The RTFP method incorporates type-2 fuzzy programming (TFP within a two-stage stochastic programming with recourse (TSP framework to handle uncertainties expressed as type-2 fuzzy sets (i.e., a fuzzy set in which the membership function is also fuzzy and probability distributions, as well as to reflect the trade-offs between conflicting economic benefits and penalties due to violated policies. The RTFP method is then applied to a real case of water pollution control in the Heshui River Basin (a rural area of China, where chemical oxygen demand (COD, total nitrogen (TN, total phosphorus (TP, and soil loss are selected as major indicators to identify the water pollution control strategies. Solutions of optimal production plans of economic activities under each probabilistic pollutant discharge allowance level and membership grades are obtained. The results are helpful for the authorities in exploring the trade-off between economic objective and pollutant discharge decision-making based on river water pollution control.

Task Characterisation and Cross-Platform Programming Through System Identification

Directory of Open Access Journals (Sweden)

Theocharis Kyriacou

2005-12-01

Full Text Available Developing robust and reliable control code for autonomous mobile robots is difficult, because the interaction between a physical robot and the environment is highly complex, it is subject to noise and variation, and therefore partly unpredictable. This means that to date it is not possible to predict robot behaviour, based on theoretical models. Instead, current methods to develop robot control code still require a substantial trial-and-error component to the software design process. Such iterative refinement could be reduced, we argue, if a more profound theoretical understanding of robot-environment interaction existed. In this paper, we therefore present a modelling method that generates a faithful model of a robot's interaction with its environment, based on data logged while observing a physical robot's behaviour. Because this modelling method — nonlinear modelling using polynomials — is commonly used in the engineering discipline of system identification, we refer to it here as “robot identification”. We show in this paper that using robot identification to obtain a computer model of robot-environment interaction offers several distinct advantages: Very compact representations (one-line programs of the robot control program are generated The model can be analysed, for example through sensitivity analysis, leading to a better understanding of the essential parameters underlying the robot's behaviour, and The generated, compact robot code can be used for cross-platform robot programming, allowing fast transfer of robot code from one type of robot to another. We demonstrate these points through experiments with a Magellan Pro and a Nomad 200 mobile robot.

The role of nutrition in integrated programs to control neglected tropical diseases

Directory of Open Access Journals (Sweden)

Hall Andrew

2012-04-01

Full Text Available Abstract There are strong and direct relationships between undernutrition and the disease caused by infectious organisms, including the diverse pathogens labeled as neglected tropical diseases (NTDs. Undernutrition increases the risk of infection, the severity of disease and the risk that children will die, while the physical damage, loss of appetite, and host responses during chronic infection can contribute substantially to undernutrition. These relationships are often synergistic. This opinion article examines the role of nutrition in controlling NTDs and makes the point that mass drug treatment - the major strategy currently proposed to control several diseases - is crucial to controlling disease and transmission, but is only the start of the process of physical recovery. Without adequate energy and nutrients to repair damaged tissues or recover lost growth and development, the benefits of treatment may not be evident quickly; the effects of control programs may be not appreciated by beneficiaries; while vulnerability to reinfection and disease may not be reduced. There is substantial potential for nutritional interventions to be added to large-scale programs to deliver drug treatments and thereby contribute, within a broad strategy of public health interventions and behavior change activities, to controlling and preventing NTDs in populations, and to restoring their health.

33 CFR Appendix C to Part 273 - Information Requirements for Aquatic Plant Control Program Environmental Impact Statements

Science.gov (United States)

2010-07-01

... Aquatic Plant Control Program Environmental Impact Statements C Appendix C to Part 273 Navigation and... Environmental Impact Statements 1. Description of the problem. a. Pests. Identify the pest to be controlled by.... Relationship to environmental situation. Non-target organisms and integrated pest management programs. 2...

Windows Calorimeter Control (WinCal) program computer software design description

International Nuclear Information System (INIS)

Pertzborn, N.F.

1997-01-01

The Windows Calorimeter Control (WinCal) Program System Design Description contains a discussion of the design details for the WinCal product. Information in this document will assist a developer in maintaining the WinCal system. The content of this document follows the guidance in WHC-CM-3-10, Software Engineering Standards, Standard for Software User Documentation

A multifunction editor for programming control sequences for a robot based radiopharmaceutical synthesis system

International Nuclear Information System (INIS)

Appelquist, G.; Bohm, C.

1990-01-01

A Multifunction Editor is a development tool for building control sequences for a robotized production system for positron emitting radiopharmaceuticals. This system consists of SCARA robot and a PC-AT personal computer as a controller together with general and synthesis specific chemistry equipment. The general equipment, which is common for many synthesis, is fixed to the wall of the hotcell, while the specific equipment, dedicated to the given synthesis, is located on a removable tray. The program recognizes commands to move the robot, to control valves and to control the computer screen. From within the editor it is possible to run the control sequence forward or backward to test it and to use the single step feature to debug. The editor commands include insert, replace and delete of commands in the sequence. When programming or editing robot movements the robot may be controlled by the mouse, from the keyboard or from a remote control box. The robot control sequence consists of a succession of stored robot positions. The screen control is used to display dynamic flowchart diagrams. This is achieved by displaying a modified picture on the screen whenever the system state has been changed significantly

Parametric synthesis of a robust controller on a base of mathematical programming method

Science.gov (United States)

Khozhaev, I. V.; Gayvoronskiy, S. A.; Ezangina, T. A.

2018-05-01

Considered paper is dedicated to deriving sufficient conditions, linking root indices of robust control quality with coefficients of interval characteristic polynomial, on the base of mathematical programming method. On the base of these conditions, a method of PI- and PID-controllers, providing aperiodic transient process with acceptable stability degree and, subsequently, acceptable setting time, synthesis was developed. The method was applied to a problem of synthesizing a controller for a depth control system of an unmanned underwater vehicle.

The history and use of cancer registry data by public health cancer control programs in the United States.

Science.gov (United States)

White, Mary C; Babcock, Frances; Hayes, Nikki S; Mariotto, Angela B; Wong, Faye L; Kohler, Betsy A; Weir, Hannah K

2017-12-15

Because cancer registry data provide a census of cancer cases, registry data can be used to: 1) define and monitor cancer incidence at the local, state, and national levels; 2) investigate patterns of cancer treatment; and 3) evaluate the effectiveness of public health efforts to prevent cancer cases and improve cancer survival. The purpose of this article is to provide a broad overview of the history of cancer surveillance programs in the United States, and illustrate the expanding ways in which cancer surveillance data are being made available and contributing to cancer control programs. The article describes the building of the cancer registry infrastructure and the successful coordination of efforts among the 2 federal agencies that support cancer registry programs, the Centers for Disease Control and Prevention and the National Cancer Institute, and the North American Association of Central Cancer Registries. The major US cancer control programs also are described, including the National Comprehensive Cancer Control Program, the National Breast and Cervical Cancer Early Detection Program, and the Colorectal Cancer Control Program. This overview illustrates how cancer registry data can inform public health actions to reduce disparities in cancer outcomes and may be instructional for a variety of cancer control professionals in the United States and in other countries. Cancer 2017;123:4969-76. Published 2017. This article is a U.S. Government work and is in the public domain in the USA. Published 2017. This article is a U.S. Government work and is in the public domain in the USA.

A flexible simulation program for multitasking operating systems to investigate controllers in thermal solar systems

Energy Technology Data Exchange (ETDEWEB)

Wittwer, C.; Horlitz, O.; Rommel, M. [Fraunhofer Inst. for Solar Energy Systems ISE, Freiburg (Germany)

1996-12-31

This paper describes a new program CoISim to simulate systems with complex controllers which is based on a principle similar to the wide-spread modular program TRNSYS. To get an accurate response of this dynamic system, small time are used steps. A numerical integration algorithm is used which is especially suitable for solving a system of nonlinear equations. With time steps of 1 second, it is possible to observe the dynamic effect of ``matched flow systems`` where the flow is a continous function of the state. An important motivation for the development of this dynamic simulation model is the validation of system models. This will be possible by comparing simulations with real measurement data having different time steps. One of the main aims is to determine the dependence of the heat transfer in the collector and the heat exchanger and the flow speed of the fluid. The energy demand of the pump is greatly influenced very much by this dependency. The mass flow controller can be a simple ``two-position controller`` or, as well, a complex ``fuzzy controller``. To describe the fuzzy controller, a separate, commercially available development program may be used. The controller is usually implemented in ANSI-C. (orig.)

Evaluating a community-based early childhood education and development program in Indonesia: study protocol for a pragmatic cluster randomized controlled trial with supplementary matched control group

NARCIS (Netherlands)

Pradhan, M.; Brinkman, S.A.; Beatty, A.; Maika, A.; Satriawan, E.; de Ree, J.; Hasan, A.

2013-01-01

Background This paper presents the study protocol for a pragmatic cluster randomized controlled trial (RCT) with a supplementary matched control group. The aim of the trial is to evaluate a community-based early education and development program launched by the Government of Indonesia. The program

Evaluating a community-based early childhood education and development program in Indonesia: study protocol for a pragmatic cluster randomized controlled trial with supplementary matched control group

NARCIS (Netherlands)

Pradhan, M.P.; Brinkman, S.A.; Beatty, A.; Maika, A.; Satriawan, E.; de Ree, J.; Hasan, A.

2013-01-01

Background: This paper presents the study protocol for a pragmatic cluster randomized controlled trial (RCT) with a supplementary matched control group. The aim of the trial is to evaluate a community-based early education and development program launched by the Government of Indonesia. The program

The CERN PS/SL Controls Java Application Programming Interface

International Nuclear Information System (INIS)

I. Deloose; J. Cuperus; P. Charrue; F. DiMaio; K. Kostro; M. Vanden Eynden; W. Watson

1999-01-01

The PS/SL Convergence Project was launched in March 1998. Its objective is to deliver a common control as infrastructure for the CERN accelerators by year 2001. In the framework of this convergence activity, a project was launched to develop a Java Application Programming Interface (API) between programs written in the Java language and the PS and SL accelerator equipment. This Java API was specified and developed in collaboration with TJNAF. It is based on the Java CDEV [1] package that has been extended in order to end up with a CERN/TJNAF common product. It implements a detailed model composed of devices organized in named classes that provide a property-based interface. It supports data subscription and introspection facilities. The device model is presented and the capabilities of the API are described with syntax examples. The software architecture is also described

Pilot program of quality control in mammography and conventional equipment in the Antioquia Department

International Nuclear Information System (INIS)

Martinez, P.; Puerta, J.A.; Morales, J.; Beltran, C.C.

2006-01-01

The Sectional Health Division of Antioquia and the National University of Colombia- Medellin Headquarters formalized an agreement for the realization of the quality control of thirty mammographs and twenty-five conventional X-ray equipment located in the one metropolitan area of Medellin, and ten municipalities of the nine regions in that the antioquen county is divided. The National University of Colombia- Headquarters Medellin possesses a program for the formation in quality control and radiological protection at master level in physics for that which endowed a radiodiagnostic laboratory for these purposes. In the Antioquia department only exists an institution, the San Vicente of Paul University Hospital that possesses a quality control program in radiodiagnostic; this hospital given its great volume of studies in radiodiagnostic has a medical physicist and of that instrumental necessary to maintain the program. The quality control programs have not been implemented in the rest of health institutions, public or private, big or small, until the moment. The project then allowed to carry out an initial evaluation of the pertinent parameters of the quality control of the facilities like its are those that refer to the state of the x-ray generator, the disposition of the installation, the dark room, the film processor and negatoscopies room; these its were carried out with base in the protocol produced in the ARCAL XLIX project in which participated six Latin American countries. The dose average in mammography, following the proposed course in the ARCAL LXXV, where its participate eleven Latin American countries was also evaluated. This study pilot serves like reference of the current state of the regional radiodiagnostic services, with base in this sampling that is representative. The obtained data gave the necessary information so that the Sectional Division of Health of Antioquia can generate tending actions to the implementation of quality guarantee programs and

Adaptive Event-Triggered Control Based on Heuristic Dynamic Programming for Nonlinear Discrete-Time Systems.

Science.gov (United States)

Dong, Lu; Zhong, Xiangnan; Sun, Changyin; He, Haibo

2017-07-01

This paper presents the design of a novel adaptive event-triggered control method based on the heuristic dynamic programming (HDP) technique for nonlinear discrete-time systems with unknown system dynamics. In the proposed method, the control law is only updated when the event-triggered condition is violated. Compared with the periodic updates in the traditional adaptive dynamic programming (ADP) control, the proposed method can reduce the computation and transmission cost. An actor-critic framework is used to learn the optimal event-triggered control law and the value function. Furthermore, a model network is designed to estimate the system state vector. The main contribution of this paper is to design a new trigger threshold for discrete-time systems. A detailed Lyapunov stability analysis shows that our proposed event-triggered controller can asymptotically stabilize the discrete-time systems. Finally, we test our method on two different discrete-time systems, and the simulation results are included.

Trace contaminant control simulation computer program, version 8.1

Science.gov (United States)

Perry, J. L.

1994-01-01

The Trace Contaminant Control Simulation computer program is a tool for assessing the performance of various process technologies for removing trace chemical contamination from a spacecraft cabin atmosphere. Included in the simulation are chemical and physical adsorption by activated charcoal, chemical adsorption by lithium hydroxide, absorption by humidity condensate, and low- and high-temperature catalytic oxidation. Means are provided for simulating regenerable as well as nonregenerable systems. The program provides an overall mass balance of chemical contaminants in a spacecraft cabin given specified generation rates. Removal rates are based on device flow rates specified by the user and calculated removal efficiencies based on cabin concentration and removal technology experimental data. Versions 1.0 through 8.0 are documented in NASA TM-108409. TM-108409 also contains a source file listing for version 8.0. Changes to version 8.0 are documented in this technical memorandum and a source file listing for the modified version, version 8.1, is provided. Detailed descriptions for the computer program subprograms are extracted from TM-108409 and modified as necessary to reflect version 8.1. Version 8.1 supersedes version 8.0. Information on a separate user's guide is available from the author.

A measurement control program to meet desired levels of precision and accuracy

International Nuclear Information System (INIS)

Bruckner, L.A.

1991-01-01

Measurement control programs are usually designed to test for precision and accuracy. Many instruments, however, display non-random data patterns such as biases or seasonal variations which are statistically significant but are of no practical significance. Application of the usual statistical tests can cause these instruments to be removed from service unnecessarily. It is tempting to try to overcome this problem by frequently adjusting the instrument or by arbitrarily changing the parameters of the statistical tests so that failures occur less often. This, of course invalidates the statistical tests. In the author's opinion, the correct way to handle this problem is to identify the desired levels of precision and accuracy, and then to combine these levels with valid statistical techniques in the measurement control-program. This paper describes one way to accomplish this

Data acquisition and control using ETHERNET

International Nuclear Information System (INIS)

Elkins, E.P.

1985-01-01

We have developed a distributed computer control system to monitor and control a linear accelerator. This system consists of two PDP-11s and eight LSI 11/23s linked together with ETHERNET. The higher level systems (control consoles, etc.) use the RSX11M operating system, whereas the data acquisition and control is performed using the RSX11S operating system downline loaded from a central host computer. Locally written ETHERNET drivers are used to reduce the CPU overhead and therefore improve system response. The ETHERNET system permits remote file access by means of operator or program interaction, as well as supporting downline system loading. Control-system functions supported are supervisory control, closed-loop control, data monitoring, and data recording. 4 refs., 2 figs., 1 tab

Components of effective randomized controlled trials of hydrotherapy programs for fibromyalgia syndrome: A systematic review

Directory of Open Access Journals (Sweden)

Luke Perraton

2009-11-01

Full Text Available Luke Perraton, Zuzana Machotka, Saravana KumarInternational Centre for Allied Health Evidence, University of South Australia, Adelaide, South Australia, AustraliaAim: Previous systematic reviews have found hydrotherapy to be an effective management strategy for fibromyalgia syndrome (FMS. The aim of this systematic review was to summarize the components of hydrotherapy programs used in randomized controlled trials.Method: A systematic review of randomized controlled trials was conducted. Only trials that have reported significant FMS-related outcomes were included. Data relating to the components of hydrotherapy programs (exercise type, duration, frequency and intensity, environmental factors, and service delivery were analyzed.Results: Eleven randomized controlled trials were included in this review. Overall, the quality of trials was good. Aerobic exercise featured in all 11 trials and the majority of hydrotherapy programs included either a strengthening or flexibility component. Great variability was noted in both the environmental components of hydrotherapy programs and service delivery.Conclusions: Aerobic exercise, warm up and cool-down periods and relaxation exercises are common features of hydrotherapy programs that report significant FMS-related outcomes. Treatment duration of 60 minutes, frequency of three sessions per week and an intensity equivalent to 60%–80% maximum heart rate were the most commonly reported exercise components. Exercise appears to be the most important component of an effective hydrotherapy program for FMS, particularly when considering mental health-related outcomes.Keywords: hydrotherapy, fibromyalgia syndrome, exercise, effective, components

Web Environment for Programming and Control of a Mobile Robot in a Remote Laboratory

Science.gov (United States)

dos Santos Lopes, Maísa Soares; Gomes, Iago Pacheco; Trindade, Roque M. P.; da Silva, Alzira F.; de C. Lima, Antonio C.

2017-01-01

Remote robotics laboratories have been successfully used for engineering education. However, few of them use mobile robots to to teach computer science. This article describes a mobile robot Control and Programming Environment (CPE) and its pedagogical applications. The system comprises a remote laboratory for robotics, an online programming tool,…

The preliminary effect of a parenting program for Korean American mothers: a randomized controlled experimental study.

Science.gov (United States)

Kim, Eunjung; Cain, Kevin C; Webster-Stratton, Carolyn

2008-09-01

Traditional Korean American discipline is characterized by a lack of expression of affection and use of harsh discipline. The purpose of this study was to pilot test the effect of the Incredible Years Parenting Program among Korean American mothers. A randomized controlled experimental study design was used; 29 first-generation Korean American mothers of young children (3-8 years old) were randomly assigned to intervention (n=20) and control (n=9) groups. Intervention group mothers received a 12-week parenting program. Control group mothers did not receive the intervention. Mothers reported on discipline styles (positive, appropriate, and harsh), level of acculturation, and their child's outcomes (behavioral problems and social competence) at pre-, post-, and 1-year follow-up intervals. After completing the program, intervention group mothers significantly increased use of positive discipline as compared to control group mothers. Among intervention group mothers, high-acculturated mothers significantly increased appropriate discipline whereas low-acculturated mothers significantly decreased harsh discipline. In the 1-year follow-up, intervention group mothers maintained the significant effect for positive discipline. Providing this program appears to be a promising way of promoting positive discipline among Korean American mothers.

Impact of an exercise program on acylcarnitines in obesity: a prospective controlled study

Directory of Open Access Journals (Sweden)

Rodríguez-Gutiérrez René

2012-05-01

Full Text Available Abstract Background Acylcarnitine (AC transport dysfunction into the mitochondrial matrix is one of the pathophysiological mechanisms of type 2 diabetes mellitus (DM. The effect of an aerobic exercise (AE program on this condition in obese subjects without DM is unclear. Methods A prospective, randomized, longitudinal, interventional study in a University Research Center involved a 10-week AE program in 32 women without DM and a body mass index (BMI greater than 27 kg/m2. (Cases n = 17; Controls n = 15. The primary objective was to evaluate the influence of a controlled AE program on beta-oxidation according to modifications in short, medium, and long-chain ACs. Secondary objectives were to define the behavior of amino acids, and the correlation between these modifications with metabolic and anthropometric markers. Results The proportion of dropouts was 17% and 6% in controls and cases, respectively. In cases there was a significant reduction in total carnitine (30.40 [95% CI 28.2 to 35.6] vs. (29.4 [CI 95% 25.1 to 31.7] p = 0.0008 and long-chain AC C14 (0.06 [95% CI 0.05 to 0.08] vs. (0.05 [95% CI 0.05 to 0.09] p = 0.005 and in C18 (0.31 [95% CI 0.27 to 0.45] vs. (0.28 [95% CI 0.22 to 0.32] p = 0.03. Free fatty acid levels remained without change during the study in both groups. Conclusion In conclusion, a controlled 10-week AE program improved beta-oxidation by reducing long-chain ACs. This finding highlights the importance that AE might have in avoiding or reverting lipotoxicity, and in consequence, improving insulin sensitivity and pancreatic beta cell functional reserve.

Population-level effects of automated smoking cessation help programs: a randomized controlled trial.

Science.gov (United States)

Borland, Ron; Balmford, James; Benda, Peter

2013-03-01

To test the population impact of offering automated smoking cessation interventions via the internet and/or by mobile phone. Pragmatic randomized controlled trial with five conditions: offer of (i) minimal intervention control; (ii) QuitCoach personalized tailored internet-delivered advice program; (iii) onQ, an interactive automated text-messaging program; (iv) an integration of both QuitCoach and onQ; and (v) a choice of either alone or the combined program. Australia, via a mix of internet and telephone contacts. A total of 3530 smokers or recent quitters recruited from those interested in quitting, and seeking self-help resources (n = 1335) or cold-contacted from internet panels (n = 2195). The primary outcome was self-report of 6 months sustained abstinence at 7 months post-recruitment. Only 42.5% of those offered one of the interventions took it up to a minimal level. The intervention groups combined had a non-significantly higher 6-month sustained abstinence rate than the control [odds ratio (OR) = 1.48; 95% confidence interval (CI): 0.98-2.24] (missing cases treated as smokers), with no differences between the interventions. Among those who used an intervention, there was a significant overall increase in abstinence (OR = 1.95; CI: 1.04-3.67), but not clearly so when analysing only cases with reported outcomes. Success rates were greater among those recruited after seeking information compared to those cold-contacted. Smokers interested in quitting who were assigned randomly to an offer of either the QuitCoach internet-based support program and/or the interactive automated text-messaging program had non-significantly greater odds of quitting for at least 6 months than those randomized to an offer of a simple information website. © 2012 The Authors, Addiction © 2012 Society for the Study of Addiction.

Effectiveness of a parent training program in (pre)adolescence: Evidence from a randomized controlled trial

NARCIS (Netherlands)

Leijten, P.H.O.; Overbeek, G.J.; Janssens, J.M.A.M.

2012-01-01

The present randomized controlled trial examined the effectiveness of the parent training program Parents and Children Talking Together (PCTT) for parents with children in the preadolescent period who experience parenting difficulties. The program is focused on reducing child problem behavior by

Six Sigma Evaluation of the High Level Waste Tank Farm Corrosion Control Program at the Savannah River Site

International Nuclear Information System (INIS)

Hill, P. J.

2003-01-01

Six Sigma is a disciplined approach to process improvement based on customer requirements and data. The goal is to develop or improve processes with defects that are measured at only a few parts per million. The process includes five phases: Identify, Measure, Analyze, Improve, and Control. This report describes the application of the Six Sigma process to improving the High Level Waste (HLW) Tank Farm Corrosion Control Program. The report documents the work performed and the tools utilized while applying the Six Sigma process from September 28, 2001 to April 1, 2002. During Fiscal Year 2001, the High Level Waste Division spent $5.9 million to analyze samples from the F and H Tank Farms. The largest portion of these analytical costs was $2.45 million that was spent to analyze samples taken to support the Corrosion Control Program. The objective of the Process Improvement Project (PIP) team was to reduce the number of analytical tasks required to support the Corrosion Control Program by 50 percent. Based on the data collected, the corrosion control decision process flowchart, and the use of the X-Y Matrix tool, the team determined that analyses in excess of the requirements of the corrosion control program were being performed. Only two of the seven analytical tasks currently performed are required for the 40 waste tanks governed by the Corrosion Control Program. Two additional analytical tasks are required for a small subset of the waste tanks resulting in an average of 2.7 tasks per sample compared to the current 7 tasks per sample. Forty HLW tanks are sampled periodically as part of the Corrosion Control Program. For each of these tanks, an analysis was performed to evaluate the stability of the chemistry in the tank and then to determine the statistical capability of the tank to meet minimum corrosion inhibitor limits. The analyses proved that most of the tanks were being sampled too frequently. Based on the results of these analyses and th e use of additional

A Comprehensive Examination of the Influence of State Tobacco Control Programs and Policies on Youth Smoking

Science.gov (United States)

Loomis, Brett R.; Han, Beth; Gfroerer, Joe; Kuiper, Nicole; Couzens, G. Lance; Dube, Shanta; Caraballo, Ralph S.

2013-01-01

Objectives. We examined the influence of tobacco control policies (tobacco control program expenditures, smoke-free air laws, youth access law compliance, and cigarette prices) on youth smoking outcomes (smoking susceptibility, past-year initiation, current smoking, and established smoking). Methods. We combined data from the 2002 to 2008 National Surveys on Drug Use and Health with state and municipality population data from the US Census Bureau to assess the associations between state tobacco control policy variables and youth smoking outcomes, focusing on youths aged 12 to 17 years. We also examined the influence of policy variables on youth access when these variables were held at 2002 levels. Results. Per capita funding for state tobacco control programs was negatively associated with all 4 smoking outcomes. Smoke-free air laws were negatively associated with all outcomes except past-year initiation, and cigarette prices were associated only with current smoking. We found no association between these outcomes and retailer compliance with youth access laws. Conclusions. Smoke-free air laws and state tobacco control programs are effective strategies for curbing youth smoking. PMID:23327252

Liquefied Gaseous Fuels Safety and Environmental Control Assessment Program: second status report

Energy Technology Data Exchange (ETDEWEB)

1980-10-01

The Assistant Secretary for Environment has responsibility for identifying, characterizing, and ameliorating the environmental, health, and safety issues and public concerns associated with commercial operation of specific energy systems. The need for developing a safety and environmental control assessment for liquefied gaseous fuels was identified by the Environmental and Safety Engineering Division as a result of discussions with various governmental, industry, and academic persons having expertise with respect to the particular materials involved: liquefied natural gas, liquefied petroleum gas, hydrogen, and anhydrous ammonia. This document is arranged in three volumes and reports on progress in the Liquefied Gaseous Fuels (LGF) Safety and Environmental Control Assessment Program made in Fiscal Year (FY)-1979 and early FY-1980. Volume 1 (Executive Summary) describes the background, purpose and organization of the LGF Program and contains summaries of the 25 reports presented in Volumes 2 and 3. Annotated bibliographies on Liquefied Natural Gas (LNG) Safety and Environmental Control Research and on Fire Safety and Hazards of Liquefied Petroleum Gas (LPG) are included in Volume 1.

Perceptions, circumstances and motivators that influence implementation of zoonotic control programs on cattle farms

NARCIS (Netherlands)

Ellis-Iversen, J.; Cook, A.J.; Watson, E.; Nielen, M.; Larkin, L.; Wooldridge, M.; Hogeveen, H.

2010-01-01

The implementation of disease control programs on farms requires an act of behavioral change. This study presents a theoretical framework from behavioral science, combined with basic epidemiological principles to investigate and explain the control of zoonotic agents on cattle farms. A pathway to

SisterTalk: final results of a culturally tailored cable television delivered weight control program for Black women

OpenAIRE

Risica, Patricia Markham; Gans, Kim M; Kumanyika, Shiriki; Kirtania, Usree; Lasater, Thomas M

2013-01-01

Background Obesity among Black women continues to exceed that of other women. Most weight loss programs created without reference to specific cultural contexts are less effective for Black than White women. Weight control approaches accessible to Black women and adapted to relevant cultural contexts are important for addressing this problem. This paper reports the final results of SisterTalk, the randomized controlled trial of a cable TV weight control program oriented toward Black women. Met...

The BRI1-associated kinase 1, BAK1, has a brassinolide-independent role in plant cell-death control

NARCIS (Netherlands)

Kemmerling, B.; Schwedt, A.; Rodriguez, P.; Mazzotta, S.; Frank, M.; Abu Qamar, S.; Mengiste, T.; Betsuyaku, S.; Parker, J.E.; Müssig, C.; Thomma, B.P.H.J.; Albrecht, C.; Vries, de S.C.; Hirt, H.; Nürnberger, T.

2007-01-01

Programmed cell death (PCD) is a common host response to microbial infection [1-3]. In plants, PCD is associated with immunity to biotrophic pathogens, but it can also promote disease upon infection by necrotrophic pathogens [4]. Therefore, plant cell-suicide programs must be strictly controlled.

National Spill Control School. A pilot program in environmental training. Final report

Energy Technology Data Exchange (ETDEWEB)

Oberholtzer, G.R.; Acuff, J.T.

1980-01-01

Increased environmental awareness and the amended Federal Water Pollution Control Act of 1972 required an increased level of expertise by the American Public in the field of oil spill prevention and control. The National Spill Control School was created at Corpus Christi State University to help meet this need. Drawing on the talents of a nationwide sample of experts in this field, the project team created a unique management oriented course. A review of the origination and experiences of two years of classes of this pilot program is provided in this report.

A randomised controlled trial of a web-based educational program in child mental health for schoolteachers.

Science.gov (United States)

Pereira, Celina Andrade; Wen, Chao Lung; Miguel, Eurípedes Constantino; Polanczyk, Guilherme V

2015-08-01

Children affected by mental disorders are largely unrecognised and untreated across the world. Community resources, including the school system and teachers, are important elements in actions directed to promoting child mental health and preventing and treating mental disorders, especially in low- and middle-income countries. We developed a web-based program to educate primary school teachers on mental disorders in childhood and conducted a cluster-randomised controlled trial to test the effectiveness of the web-based program intervention in comparison with the same program based on text and video materials only and to a waiting-list control group. All nine schools of a single city in the state of São Paulo, Brazil, were randomised to the three groups, and teachers completed the educational programs during 3 weeks. Data were analysed according to complete cases and intention-to-treat approaches. In terms of gains of knowledge about mental disorders, the web-based program intervention was superior to the intervention with text and video materials, and to the waiting-list control group. In terms of beliefs and attitudes about mental disorders, the web-based program intervention group presented less stigmatised concepts than the text and video group and more non-stigmatised concepts than the waiting-list group. No differences were detected in terms of teachers' attitudes. This study demonstrated initial data on the effectiveness of a web-based program in educating schoolteachers on child mental disorders. Future studies are necessary to replicate and extend the findings.

The Material Protection, Control and Accounting Sustainability Program Implementation at the Electrochemical Plant

International Nuclear Information System (INIS)

Sirotenko, Vladimir; Antonov, Eduard; Sirotenko, Alexei; Kukartsev, Alexander; Krivenko, Vladimir; Dabbs, Richard D.; Carroll, Michael F.; Garrett, Albert G.; Patrick, Scott W.; Ku, Esther M.

2008-01-01

Joint efforts by the Electrochemical Plant (ECP) in Zelenogorsk, Russia, and the United States Department of Energy National Nuclear Security Administration (US DOE/NNSA) Material Protection, Control and Accounting (MPC and A) Program to upgrade ECP security systems began in 1996. The commissioning of major MPC and A systems at ECP occurred in December 2004. Since that time, the US Project Team (USPT) and ECP personnel have focused jointly on the development and implementation of an enterprise-wide MPC and A Sustainability Program (SP) that address the seven essential MPC and A Program sustainability elements. This paper describes current operational experience at the ECP with the full implementation of the site SP utilizing an earned-value methodology. In support of this site program, ECP has established a Document Control Program (DCP) for sustainability-related documents; developed a robust master Work Breakdown Structure (WBS) that outlines all ECP MPC and A sustainability activities; and chartered an Enterprise-Wide Sustainability Working Group (ESWG) The earned value methodology uses ECP-completed (and USPT-verified) analyses to assess project performance on a quarterly basis. The MPC and A SP, presently operational through a contract between ECP and the Los Alamos National Laboratory (LANL), incorporates the seven essential MPC and A Program sustainability elements and governs all sustainability activities associated with MPC and A systems at ECP. The site SP is designed to ensure over the near term the upgraded MPC and A systems continuous operation at ECP as funding transitions from US-assisted to fully Russian supported and sustained

The effect of implementation of health promotion program in school to control risk factors for obesity in adolescents

Directory of Open Access Journals (Sweden)

Arman Azadi

2009-02-01

.006, P=0.034, P=0.001 respectively, but there was no significant difference between the intake mean of these food products in the control group after and before the intervention (P>0.05. There were significant differences between the mean time of vigorous physical activity in one week and TV watching in the case group after and before the intervention (P=0.04, P=0.001 respectively whereas there is no significant differences between mean time of these activities in control group (P>0.05. Conclusion: This research showed that although there were no significant differences between the students’ mean BMI between the two groups after intervention but implementation of this program to control risk factors for obesity regarding dietary pattern and physical activity was successful. Therefore, it is recommended to investigate the effectiveness of such interventions over time in further studies.

Impact of Frequent Interruption on Nurses' Patient-Controlled Analgesia Programming Performance.

Science.gov (United States)

Campoe, Kristi R; Giuliano, Karen K

2017-12-01

The purpose was to add to the body of knowledge regarding the impact of interruption on acute care nurses' cognitive workload, total task completion times, nurse frustration, and medication administration error while programming a patient-controlled analgesia (PCA) pump. Data support that the severity of medication administration error increases with the number of interruptions, which is especially critical during the administration of high-risk medications. Bar code technology, interruption-free zones, and medication safety vests have been shown to decrease administration-related errors. However, there are few published data regarding the impact of number of interruptions on nurses' clinical performance during PCA programming. Nine acute care nurses completed three PCA pump programming tasks in a simulation laboratory. Programming tasks were completed under three conditions where the number of interruptions varied between two, four, and six. Outcome measures included cognitive workload (six NASA Task Load Index [NASA-TLX] subscales), total task completion time (seconds), nurse frustration (NASA-TLX Subscale 6), and PCA medication administration error (incorrect final programming). Increases in the number of interruptions were associated with significant increases in total task completion time ( p = .003). We also found increases in nurses' cognitive workload, nurse frustration, and PCA pump programming errors, but these increases were not statistically significant. Complex technology use permeates the acute care nursing practice environment. These results add new knowledge on nurses' clinical performance during PCA pump programming and high-risk medication administration.

Assessing Awareness and Use of Evidence-Based Programs for Cancer Control in Puerto Rico

Science.gov (United States)

Calo, William A.; Fernández, María E.; Rivera, Mirza; Díaz, Elba C.; Correa-Fernández, Virmarie; Pattatucci, Angela; Wetter, David W.

2012-01-01

The Community Cancer Control Outreach Program (CCCOP) is a community-academic partnership aimed at developing and implementing a cancer control outreach, research, and training program in Puerto Rico. The CCCOP surveyed 56 partners to assess their awareness, training needs, and use of resources related to evidence-based programs (EBPs). Despite relatively high levels (70%) of confidence in adopting EBPs, there were low levels of awareness (37%) and use (25%) of existing EBPs resources. Respondents’ who had used EBPs resources were more likely to have positive beliefs about EBPs than nonusers (p<0.05). Training needs were high among respondents and no significant differences were found between those who had and had not used existing EBPs resources. These findings can guide the development of training tools and technical assistance to increase the use of EBPs for Latino audiences. PMID:22528632

Effects of a dynamic core stability program on the biomechanics of cutting maneuvers: A randomized controlled trial.

Science.gov (United States)

Whyte, E F; Richter, C; O'Connor, S; Moran, K A

2018-02-01

Deficits in trunk control predict ACL injuries which frequently occur during high-risk activities such as cutting. However, no existing trunk control/core stability program has been found to positively affect trunk kinematics during cutting activities. This study investigated the effectiveness of a 6-week dynamic core stability program (DCS) on the biomechanics of anticipated and unanticipated side and crossover cutting maneuvers. Thirty-one male, varsity footballers participated in this randomized controlled trial. Three-dimensional trunk and lower limb biomechanics were captured in a motion analysis laboratory during the weight acceptance phase of anticipated and unanticipated side and crossover cutting maneuvers at baseline and 6-week follow-up. The DCS group performed a DCS program three times weekly for 6 weeks in a university rehabilitation room. Both the DCS and control groups concurrently completed their regular practice and match play. Statistical parametric mapping and repeated measures analysis of variance were used to determine any group (DCS vs control) by time (pre vs post) interactions. The DCS resulted in greater internal hip extensor (P=.017, η 2 =0.079), smaller internal knee valgus (P=.026, η 2 =0.076), and smaller internal knee external rotator moments (P=.041, η 2 =0.066) during anticipated side cutting compared with the control group. It also led to reduced posterior ground reaction forces for all cutting activities (P=.015-.030, η 2 =0.074-0.105). A 6-week DCS program did not affect trunk kinematics, but it did reduce a small number of biomechanical risk factors for ACL injury, predominantly during anticipated side cutting. A DCS program could play a role in multimodal ACL injury prevention programs. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

76 FR 39006 - Medicare Program; Hospital Inpatient Value-Based Purchasing Program; Correction

Science.gov (United States)

2011-07-05

... and 480 [CMS-3239-CN] RIN 0938-AQ55 Medicare Program; Hospital Inpatient Value-Based Purchasing... Value-Based Purchasing Program.'' DATES: Effective Date: These corrections are effective on July 1, 2011... for the hospital value-based purchasing program. Therefore, in section III. 6. and 7. of this notice...

Spatial Programming for Industrial Robots through Task Demonstration

Directory of Open Access Journals (Sweden)

Jens Lambrecht

2013-05-01

Full Text Available Abstract We present an intuitive system for the programming of industrial robots using markerless gesture recognition and mobile augmented reality in terms of programming by demonstration. The approach covers gesture-based task definition and adaption by human demonstration, as well as task evaluation through augmented reality. A 3D motion tracking system and a handheld device establish the basis for the presented spatial programming system. In this publication, we present a prototype toward the programming of an assembly sequence consisting of several pick-and-place tasks. A scene reconstruction provides pose estimation of known objects with the help of the 2D camera of the handheld. Therefore, the programmer is able to define the program through natural bare-hand manipulation of these objects with the help of direct visual feedback in the augmented reality application. The program can be adapted by gestures and transmitted subsequently to an arbitrary industrial robot controller using a unified interface. Finally, we discuss an application of the presented spatial programming approach toward robot-based welding tasks.

National Waste Terminal Storage Program: planning and control plan. Volume II. Plan description

International Nuclear Information System (INIS)

1977-05-01

Objective of the NWTS program planning and control plan is to provide the information necessary for timely and effective OWI management decisions. Purpose is to describe the concepts and techniques that will be utilized by OWI to establish structured, completely planned and controlled technical, cost, and schedule NWTS baselines from which performance or progress can be accurately measured

Uncertainty Modeling and Robust Output Feedback Control of Nonlinear Discrete Systems: A Mathematical Programming Approach

Directory of Open Access Journals (Sweden)

Olav Slupphaug

2001-01-01

Full Text Available We present a mathematical programming approach to robust control of nonlinear systems with uncertain, possibly time-varying, parameters. The uncertain system is given by different local affine parameter dependent models in different parts of the state space. It is shown how this representation can be obtained from a nonlinear uncertain system by solving a set of continuous linear semi-infinite programming problems, and how each of these problems can be solved as a (finite series of ordinary linear programs. Additionally, the system representation includes control- and state constraints. The controller design method is derived from Lyapunov stability arguments and utilizes an affine parameter dependent quadratic Lyapunov function. The controller has a piecewise affine output feedback structure, and the design amounts to finding a feasible solution to a set of linear matrix inequalities combined with one spectral radius constraint on the product of two positive definite matrices. A local solution approach to this nonconvex feasibility problem is proposed. Complexity of the design method and some special cases such as state- feedback are discussed. Finally, an application of the results is given by proposing an on-line computationally feasible algorithm for constrained nonlinear state- feedback model predictive control with robust stability.

Participation in a National Lifestyle Change Program is associated with improved diabetes Control outcomes.

Science.gov (United States)

Jackson, Sandra L; Staimez, Lisa R; Safo, Sandra; Long, Qi; Rhee, Mary K; Cunningham, Solveig A; Olson, Darin E; Tomolo, Anne M; Ramakrishnan, Usha; Narayan, Venkat K M; Phillips, Lawrence S

2017-09-01

Clinical trials show lifestyle change programs are beneficial, yet large-scale, successful translation of these programs is scarce. We investigated the association between participation in the largest U.S. lifestyle change program, MOVE!, and diabetes control outcomes. This longitudinal, retrospective cohort study used Veterans Health Administration databases of patients with diabetes who participated in MOVE! between 2005 and 2012, or met eligibility criteria (BMI ≥25kg/m 2 ) but did not participate. Main outcomes were diabetic eye disease, renal disease, and medication intensification. There were 400,170 eligible patients with diabetes, including 87,366 (22%) MOVE! Included patients were 96% male, 77% white, with mean age 58years and BMI 34kg/m 2 . Controlling for baseline measurements and age, race, sex, BMI, and antidiabetes medications, MOVE! participants had lower body weight (-0.6kg), random plasma glucose (-2.8mg/dL), and HbA1c (-0.1%) at 12months compared to nonparticipants (each plifestyle change programs in U.S. health systems may improve health among the growing patient population with diabetes. Published by Elsevier Inc.

SAVLOC, computer program for automatic control and analysis of X-ray fluorescence experiments

Science.gov (United States)

Leonard, R. F.

1977-01-01

A program for a PDP-15 computer is presented which provides for control and analysis of trace element determinations by using X-ray fluorescence. The program simultaneously handles data accumulation for one sample and analysis of data from previous samples. Data accumulation consists of sample changing, timing, and data storage. Analysis requires the locating of peaks in X-ray spectra, determination of intensities of peaks, identification of origins of peaks, and determination of a real density of the element responsible for each peak. The program may be run in either a manual (supervised) mode or an automatic (unsupervised) mode.

Maintaining quality control in a nontraditional nuclear technology degree program

International Nuclear Information System (INIS)

DeSain, G.W.

1989-01-01

Regents College, created by the Board of Regents of the University of The State on New York in 1971, has been offering, since January 1985, AS and BS degrees in nuclear technology. The impetus for establishing the nuclear technology degrees came from nuclear utility management and had to do with the US Nuclear Regulatory Commission proposed rule regarding degreed operators on shift. There are a variety of ways to earn credits in Regents College degree programs: (1) college courses taken for degree-level credit from regionally accredited colleges; (2) courses sponsored by business, industry, or government that have been evaluated and recommended for credit by the New York National or American Council on Education (ACE's) Program on Noncollegiate Sponsored Instruction (PONSI); (3) military education that has been evaluated by ACE PONSI; (4) approved college-proficiency examinations; and (5) special assessment: an individualized examination of college-level knowledge gained from experience or independent study. Nuclear technology students primarily use college course work, evaluated military education, and proficiency examinations to complete degree programs. However, an increasing number of utilities are having training programs PONSI evaluated, resulting in an increased use of these courses in the nuclear technology degrees. Quality control is a function of several factors described in the paper

Multilevel Approach of a 1-Year Program of Dietary and Exercise Interventions on Bone Mineral Content and Density in Metabolic Syndrome--the RESOLVE Randomized Controlled Trial.

Science.gov (United States)

Courteix, Daniel; Valente-dos-Santos, João; Ferry, Béatrice; Lac, Gérard; Lesourd, Bruno; Chapier, Robert; Naughton, Geraldine; Marceau, Geoffroy; João Coelho-e-Silva, Manuel; Vinet, Agnès; Walther, Guillaume; Obert, Philippe; Dutheil, Frédéric

2015-01-01

Weight loss is a public health concern in obesity-related diseases such as metabolic syndrome (MetS). However, restrictive diets might induce bone loss. The nature of exercise and whether exercise with weight loss programs can protect against potential bone mass deficits remains unclear. Moreover, compliance is essential in intervention programs. Thus, we aimed to investigate the effects that modality and exercise compliance have on bone mineral content (BMC) and density (BMD). We investigated 90 individuals with MetS who were recruited for the 1-year RESOLVE trial. Community-dwelling seniors with MetS were randomly assigned into three different modalities of exercise (intensive resistance, intensive endurance, moderate mixed) combined with a restrictive diet. They were compared to 44 healthy controls who did not undergo the intervention. This intensive lifestyle intervention (15-20 hours of training/week + restrictive diet) resulted in weight loss, body composition changes and health improvements. Baseline BMC and BMD for total body, lumbar spine and femoral neck did not differ between MetS groups and between MetS and controls. Despite changes over time, BMC or BMD did not differ between the three modalities of exercise and when compared with the controls. However, independent of exercise modality, compliant participants increased their BMC and BMD compared with their less compliant peers. Decreases in total body lean mass and negative energy balance significantly and independently contributed to decreases in lumbar spine BMC. After the one year intervention, differences relating to exercise modalities were not evident. However, compliance with an intensive exercise program resulted in a significantly higher bone mass during energy restriction than non-compliance. Exercise is therefore beneficial to bone in the context of a weight loss program. ClinicalTrials.gov NCT00917917.

Postural control in elderly persons with osteoporosis: Efficacy of an intervention program to improve balance and muscle strength: a randomized controlled trial.

Science.gov (United States)

Burke, Thomaz Nogueira; França, Fábio Jorge Renovato; Ferreira de Meneses, Sarah Rúbia; Cardoso, Viviam Inhasz; Marques, Amélia Pasqual

2010-07-01

To assess the efficacy of an exercise program aiming to improve balance and muscular strength, for postural control and muscular strength of women with osteoporosis. Sample consisted of 33 women with osteoporosis, randomized into one of two groups: intervention group, in which exercises for balance and improvement of muscular strength of the inferior members were performed for 8 wks (n = 17, age 72.8 +/- 3.6 yrs); control group, which was women not practicing exercises (n = 16, age 74.4 +/- 3.7 yrs). At baseline and after 8 wks of treatment, postural control was assessed using a force plate (Balance Master, Neurocom), and muscular strength during ankle dorsiflexion, knee extension, and flexion was assessed by dynamometry. Adherence to the program was 82%. When compared with the control group, individuals in the intervention group significantly improved the center of pressure velocity (P = 0.02) in the modified clinical test of sensory interaction for balance test, center of pressure velocity (P control (P postural control and lower-limb strength in elderly women with osteoporosis.

DBSSP - A computer program for simulation of controlled circulation boiler and natural circulation boiler start up behavior

International Nuclear Information System (INIS)

Li Bin; Chen Tingkuan; Yang Dong

2005-01-01

In this paper, a computer program, Drum Boiler Start-up Simulation Program (DBSSP), is developed for simulating the start up behavior of controlled circulation and natural circulation boilers. The mathematical model developed here is based on the first principles of mass, energy and momentum conservations. In the boiler model, heat transfer in the waterwall, the superheater, the reheater and the economizer is simulated by the distributing parameter method, while heat transfer in the drum and the downcomer is simulated by lumped parameter analysis. The program can provide detailed flow and thermodynamic characteristics of the boiler components. The development of this program is based only on design data, so it can be used for any subcritical, controlled or natural circulation boiler. The simulation results were compared with experimental measurements, and good agreements between them were found. This program is expected to be useful for predicting the characteristics and the performance of controlled circulation and natural circulation boilers during the start up process. It also can be used to optimize a start up system for minimum start up time

Applying economic incentives to increase effectiveness of an outpatient weight loss program (TRIO) - A randomized controlled trial.

Science.gov (United States)

Finkelstein, Eric A; Tham, Kwang-Wei; Haaland, Benjamin A; Sahasranaman, Aarti

2017-07-01

The prevalence of overweight and obesity has more than doubled in the past three decades, leading to rising rates of non-communicable diseases. This study tests whether adding a payment/rewards (term reward) program to an existing evidence-based weight loss program can increase weight loss and weight loss maintenance. We conducted a parallel-group randomized controlled trial from October 2012 to October 2015 with 161 overweight or obese individuals randomized to either control or reward arm in a 1:2 ratio. Control and reward arm participants received a four month weight loss program at the LIFE (Lifestyle Improvement and Fitness Enhancement) Centre at Singapore General Hospital. Those in the reward arm paid a fee of S$165.00 (1US$ = 1.35S$) to access a program that provided rewards of up to S$660 for meeting weight loss and physical activity goals. Participants could choose to receive rewards as guaranteed cash payments or a lottery ticket with a 1 in 10 chance of winning but with the same expected value. The primary outcome was weight loss at months 4, 8, and 12. 161 participants were randomized to control (n = 54) or reward (n = 107) arms. Average weight loss was more than twice as great in the reward arm compared to the control arm at month 4 when the program concluded (3.4 kg vs 1.4 kg, p rewards concluded (3.3 kg vs 1.8 kg, p rewards program can be used to improve weight loss and weight loss maintenance when combined with an evidence-based weight loss program. Future efforts should attempt to replicate this approach and identify how to cost effectively expand these programs to maximize their reach. This study is registered at www.clinicaltrials.gov (Identifier: NCT01533454). Copyright © 2017 Elsevier Ltd. All rights reserved.

21 CFR 1301.73 - Physical security controls for non-practitioners; compounders for narcotic treatment programs...

Science.gov (United States)

2010-04-01

...; compounders for narcotic treatment programs; manufacturing and compounding areas. 1301.73 Section 1301.73 Food... controls for non-practitioners; compounders for narcotic treatment programs; manufacturing and compounding... unauthorized persons may not enter or leave the area without his knowledge. (c) During the production of...

Quality control for the mammography screening program in Serbia: Physical and technical aspects

International Nuclear Information System (INIS)

Ciraj-Bjelac, O.; Bozovic, P.; Lazarevic, D.; Arandjic, D.; Kosutic, D.

2012-01-01

Breast cancer is the major cause of mortality among female population in Serbia. It is presumed that the introduction of screening programme will reduce mortality and therefore, 47 new mammography units were installed for the purpose of population-based screening program in 2011. In parallel, Quality assurance and Quality control (QC) in mammography has received increasing attention as an essential element of the successful breast cancer campaign that is for the first time initialed in Serbia. The purpose of this study is to investigate the need for and the possible implementation of the comprehensive QC programme for the mammography screening in Serbia, with special focus on physical and technical aspect. In the first phase, a QC protocols containing list of parameters, methodology, frequency of tests and reference values for screen-film, computed radiography and full-filed digital mammography) units, were developed. The second phase is focused on the initial implementation of these protocols. The paper presents results of tests of the selected parameters in 35 mammography units, with special emphasis on patient dose and image quality descriptors. After initial implementation at the beginning of the population based breast cancer screening campaign, it is essential to establish system of regular and periodic QC equipment monitoring and to ensure high quality mammograms with minimal possible radiation dose to population included in the screening. (authors)

Study on chemical reactivity control of liquid sodium. Research program

International Nuclear Information System (INIS)

Saito, Jun-ichi; Ara, Kuniaki; Sugiyama, Ken-ichiro; Kitagawa, Hiroshi; Oka, Nobuki; Yoshioka, Naoki

2007-01-01

Liquid sodium has the excellent properties as coolant of the fast breeder reactor (FBR). On the other hand, it reacts high with water and oxygen. So an innovative technology to suppress the reactivity is desired. The purpose of this study is to control the chemical reactivity of liquid sodium by dispersing the nanometer-size metallic particles (we call them Nano-particles) into liquid sodium. We focus on the atomic interaction between Nano-particles and sodium atoms. And we try to apply it to suppress the chemical reactivity of liquid sodium. Liquid sodium dispersing Nano-particles is named 'Nano-fluid'. Research programs of this study are the Nano-particles production, the evaluation of reactivity suppression of liquid sodium and the feasibility study to FBR plant. In this paper, the research programs and status are described. The important factors for particle production were understood. In order to evaluate the chemical reactivity of Nano-fluid the research programs were planned. The feasibility of the application of Nano-fluid to the coolant of FBR plant was evaluated preliminarily from the viewpoint of design and operation. (author)

A Web Based Educational Programming Logic Controller Training Set Based on Vocational High School Students' Demands

Directory of Open Access Journals (Sweden)

Abdullah Alper Efe

2018-01-01

Full Text Available The purpose of this study was to design and develop aProgramming Logic Controller Training Set according to vocational high school students’ educational needs. In this regard, by using the properties of distance education the proposed system supported “hands-on” PLC programming laboratory exercises in industrial automation area. The system allowed students to access and control the PLC training set remotely. For this purpose, researcher designed a web site to facilitate students’ interactivity and support PLC programming. In the training set, Induction Motor, Frequency Converter and Encoder tripart controlled by Siemens Simatic S7-200 PLC controller by the help of SIMATIC Step 7 Programming Software were used to make the system more effective and efficient. Moreover, training set included an IP camera system allowing to monitor devices and pilot application. By working with this novel remote accessible training set, students and researchers recieved a chance to inhere self paced learning experiences. Also, The PLC training set offered an effective learning enviroenment for distance education, which is based on presenting the content on the web and opening it to the online users and provided a safe and economical solution for multiple users in a workplace to enhance the quality of education with less overall cost.

Radiological control aspects of the fabrication of the Light Water Breeder Reactor core (LWBR Development Program)

International Nuclear Information System (INIS)

Schultz, B.G.

1979-05-01

A description is presented of the radiological control aspects of the fabrication of the Light Water Breeder Reactor (LWBR) core. Included are the radiological control criteria applied for the design and use of fabrication facilities, the controls and limits imposed to minimize radiaion exposure to personnel, and an evaluation of the applied radiological program in meeting the program objectives. The goal of the LWBR program is to develop the technology to breed in light water reactors so that nuclear fuel may be used significantly more efficiently in these reactors. This technology is being developed by designing and fabricating a breeder reactor core, utilizing thoria (ThO 2 ) and binary thoria--urania (ThO 2 - 233 UO 2 ) fuel, to be operated in the existing pressurized water reactor plant owned by the Department of Energy at Shippingport, Pennsylvania

The Centers for Disease Control program to prevent primary and secondary disabilities in the United States.

OpenAIRE

Houk, V N; Thacker, S B

1989-01-01

The Disabilities Prevention Program builds on traditional Centers for Disease Control (CDC) strengths in public health surveillance, epidemiology, and technology transfer to State and local governments in translating the findings of research into prevention programs. The objectives of the CDC program are to provide a national focus for the prevention of primary and secondary disabilities, build capacity at the State and community levels to maintain programs to prevent disabilities, and increa...

Self-Image Development: A Chicano Enfasis. Self-Programmed Counseling and Self-Programmed Control. Instructor's Guide = Desarrollo de la Imagen Propia: Enfasis en el Chicano. Sistema de Consejo y Control Auto-Programado. Manuel del Profesor.

Science.gov (United States)

Mireles, S. Raymond

Self-Programmed Counseling, the instructor's guidance, and Self-Programmed Control (SPC), the student's response, was initially developed by Title III Project USTED (United Students and Teachers for Educational Development) for Mexican American students on academic probation to use on a non-credit, special group counseling basis. As part of a…

Ageing management program for reactor components in HANARO

International Nuclear Information System (INIS)

Cho, Yeong-Garp; Wu, Sang-Ik; Lee, Jung-Hee; Ryu, Jeong-Soo; Park, Yong-Chul; Wu, Jong-Sup; Jun, Byung Jin

2003-01-01

The HANARO, an open-tank-in-pool type research reactor of 30MWth power in Korea, has operated for 8 years since its initial criticality in February of 1995. The reactor power has been gradually increased to 24 MWth through the service period. Therefore the reactor age is very young from the viewpoint of the ageing effect on the reactor structure and components by neutron irradiation considering the expected reactor lifetime. But, we have a few programs to manage the ageing from the aspect of design lifetime of reactor components. This paper summarizes the overall progress and plan for the ageing management for the reactor components including lifetime extension and design improvement, remote measurements and in-service inspections. The shutoff units and control absorber units have aged more rapidly than other structures or components because the number of rod drop cycles was higher than expected at the design stage. The system commissioning tests, periodic performance tests, and weekly operation for the stable supply of medical radioisotopes overriding the normal cycle operation have contributed to the high frequency of rod drop. Therefore, we have instituted a program to extend the lifetime of the shutoff units and the control absorber units. This program includes an endurance test to verify the performance for the extended number of drops and the management of shutdown methods to minimize the drop cycles for both the shutoff units and the control absorber units. The program also includes the design improvement of the damper mechanism of the control absorber units to reduce the impact force caused by rod drop. The inner shell of the reflector vessel surrounding the core is the most critical part from the viewpoint of neutron irradiation. The periodic measurement of the dimensional change in the vertical straightness of the inner shell is considered as one of the in-service inspections. We developed a few tools and verified the performance to measure the

A Telerehabilitation Program Improves Postural Control in Multiple Sclerosis Patients: A Spanish Preliminary Study

Directory of Open Access Journals (Sweden)

Rosa Ortiz-Gutiérrez

2013-10-01

Full Text Available Postural control disorders are among the most frequent motor disorder symptoms associated with multiple sclerosis. This study aims to demonstrate the potential improvements in postural control among patients with multiple sclerosis who complete a telerehabilitation program that represents a feasible alternative to physical therapy for situations in which conventional treatment is not available. Fifty patients were recruited. Control group (n = 25 received physiotherapy treatment twice a week (40 min per session. Experimental group (n = 25 received monitored telerehabilitation treatment via videoconference using the Xbox 360® and Kinect console. Experimental group attended 40 sessions, four sessions per week (20 min per session.The treatment schedule lasted 10 weeks for both groups. A computerized dynamic posturography (Sensory Organization Test was used to evaluate all patients at baseline and at the end of the treatment protocol. Results showed an improvement over general balance in both groups. Visual preference and the contribution of vestibular information yielded significant differences in the experimental group. Our results demonstrated that a telerehabilitation program based on a virtual reality system allows one to optimize the sensory information processing and integration systems necessary to maintain the balance and postural control of people with multiple sclerosis. We suggest that our virtual reality program enables anticipatory PC and response mechanisms and might serve as a successful therapeutic alternative in situations in which conventional therapy is not readily available.

A Telerehabilitation Program Improves Postural Control in Multiple Sclerosis Patients: A Spanish Preliminary Study

Science.gov (United States)

Ortiz-Gutiérrez, Rosa; Cano-de-la-Cuerda, Roberto; Galán-del-Río, Fernando; Alguacil-Diego, Isabel María; Palacios-Ceña, Domingo; Miangolarra-Page, Juan Carlos

2013-01-01

Postural control disorders are among the most frequent motor disorder symptoms associated with multiple sclerosis. This study aims to demonstrate the potential improvements in postural control among patients with multiple sclerosis who complete a telerehabilitation program that represents a feasible alternative to physical therapy for situations in which conventional treatment is not available. Fifty patients were recruited. Control group (n = 25) received physiotherapy treatment twice a week (40 min per session). Experimental group (n = 25) received monitored telerehabilitation treatment via videoconference using the Xbox 360® and Kinect console. Experimental group attended 40 sessions, four sessions per week (20 min per session).The treatment schedule lasted 10 weeks for both groups. A computerized dynamic posturography (Sensory Organization Test) was used to evaluate all patients at baseline and at the end of the treatment protocol. Results showed an improvement over general balance in both groups. Visual preference and the contribution of vestibular information yielded significant differences in the experimental group. Our results demonstrated that a telerehabilitation program based on a virtual reality system allows one to optimize the sensory information processing and integration systems necessary to maintain the balance and postural control of people with multiple sclerosis. We suggest that our virtual reality program enables anticipatory PC and response mechanisms and might serve as a successful therapeutic alternative in situations in which conventional therapy is not readily available. PMID:24185843

Estimating the Impacts of Direct Load Control Programs Using GridPIQ, a Web-Based Screening Tool

Energy Technology Data Exchange (ETDEWEB)

Pal, Seemita; Thayer, Brandon L.; Barrett, Emily L.; Studarus, Karen E.

2017-11-13

In direct load control (DLC) programs, utilities can curtail the demand of participating loads to contractually agreed-upon levels during periods of critical peak load, thereby reducing stress on the system, generation cost, and required transmission and generation capacity. Participating customers receive financial incentives. The impacts of implementing DLC programs extend well beyond peak shaving. There may be a shift of load proportional to the interrupted load to the times before or after a DLC event, and different load shifts have different consequences. Tools that can quantify the impacts of such programs on load curves, peak demand, emissions, and fossil fuel costs are currently lacking. The Grid Project Impact Quantification (GridPIQ) screening tool includes a Direct Load Control module, which takes into account project-specific inputs as well as the larger system context in order to quantify the impacts of a given DLC program. This allows users (utilities, researchers, etc.) to test and compare different program specifications and their impacts.

76 FR 56982 - Announcement of Federal Underground Injection Control (UIC) Class VI Program for Carbon Dioxide (CO2

Science.gov (United States)

2011-09-15

...-9465-1] Announcement of Federal Underground Injection Control (UIC) Class VI Program for Carbon Dioxide... Injection Control (UIC) Class VI Program for Carbon Dioxide (CO 2 ) Geologic Sequestration (GS) Wells under... highlighted in the ``Report of the Interagency Task Force on Carbon Capture and Storage'' (August 2010), it is...

Impulsive Control for Continuous-Time Markov Decision Processes: A Linear Programming Approach

Energy Technology Data Exchange (ETDEWEB)

Dufour, F., E-mail: dufour@math.u-bordeaux1.fr [Bordeaux INP, IMB, UMR CNRS 5251 (France); Piunovskiy, A. B., E-mail: piunov@liv.ac.uk [University of Liverpool, Department of Mathematical Sciences (United Kingdom)

2016-08-15

In this paper, we investigate an optimization problem for continuous-time Markov decision processes with both impulsive and continuous controls. We consider the so-called constrained problem where the objective of the controller is to minimize a total expected discounted optimality criterion associated with a cost rate function while keeping other performance criteria of the same form, but associated with different cost rate functions, below some given bounds. Our model allows multiple impulses at the same time moment. The main objective of this work is to study the associated linear program defined on a space of measures including the occupation measures of the controlled process and to provide sufficient conditions to ensure the existence of an optimal control.

Control method for biped locomotion robots based on ZMP information

International Nuclear Information System (INIS)

Kume, Etsuo

1994-01-01

The Human Acts Simulation Program (HASP) started as a ten year program of Computing and Information Systems Center (CISC) at Japan Atomic Energy Research Institute (JAERI) in 1987. A mechanical design study of biped locomotion robots for patrol and inspection in nuclear facilities is being performed as an item of the research scope. One of the goals of our research is to design a biped locomotion robot for practical use in nuclear facilities. So far, we have been studying for several dynamic walking patterns. In conventional control methods for biped locomotion robots, the program control is used based on preset walking patterns, so it dose not have the robustness such as a dynamic change of walking pattern. Therefore, a real-time control method based on dynamic information of the robot states is necessary for the high performance of walking. In this study a new control method based on Zero Moment Point (ZMP) information is proposed as one of real-time control methods. The proposed method is discussed and validated based on the numerical simulation. (author)

The effects of an 8-week computerized cognitive training program in older adults: a study protocol for a randomized controlled trial.

Science.gov (United States)

Ten Brinke, Lisanne F; Best, John R; Crockett, Rachel A; Liu-Ambrose, Teresa

2018-01-30

Given the world's aging population, it is important to identify strategies that promote healthy cognitive aging and minimize cognitive decline. Currently, no curative pharmaceutical therapy exists for cognitive impairment and dementia. As a result, there is much interest in lifestyle approaches. Specifically, complex mental activity, such as cognitive training, may be a promising method to combat cognitive decline in older adults. As such, the industry of commercial computerized cognitive training (CCT) applications has rapidly grown in the last decade. However, the efficacy of these commercial products is largely not established. Moreover, exercise is a recognized strategy for promoting cognitive outcomes in older adults and may augment the efficacy of computerized cognitive training applications. Therefore, we propose a proof-of-concept randomized controlled trial (RCT) to examine the effect of a commercial CCT program in community-dwelling older adults. An 8-week RCT to examine the effect of a commercial CCT program, alone and preceded by a 15-min brisk walk, on cognitive function and explore the underlying neural mechanisms in adults aged 65-85 years old. Participants will be randomized to one of three intervention groups: 1) Computerized cognitive training (FBT); 2) A 15-min brisk walk followed by computerized cognitive training (Ex-FBT); or 3) A combination of educational classes, sham cognitive training, and balanced and tone exercises (active control, BAT). Participants in all intervention groups will attend three one-hour classes per week over the course of the intervention. Participants will be assessed at baseline, trial completion, and 1-year post study completion (1-year follow-up). If results from this study show benefits for cognition at trial completion, CCT programs, alone or in combination with walking, might be a strategy to promote healthy cognitive aging in older adults. In addition, results from the 1-year follow-up measurement could provide

Consumer preferences in format and type of community-based weight control programs.

Science.gov (United States)

Sherwood, N E; Morton, N; Jeffery, R W; French, S A; Neumark-Sztainer, D; Falkner, N H

1998-01-01

The purpose of this study was to provide further information about preferences for types and formats (e.g., correspondence vs. face to face) of eating and exercise programs, actual participation rates in a variety of offered programs, and characteristics of program participants vs. nonparticipants. Over a 3-year period, a large sample of community volunteers was given the opportunity to participate in various forms of diet and exercise programs as part of a weight gain prevention study. The study was conducted at a university and three local health department sites. Subjects in the study were 616 individuals participating in the Pound of Prevention study (POP), a 3-year randomized evaluation of an intervention for preventing weight gain. The primary outcomes assessed were participation rates for each program offering. Program participants were also compared to those who did not participate on demographic characteristics, smoking, diet behavior, exercise behavior, and weight concern. Survey results indicated that correspondence formats for delivery of health education programs were rated as more desirable than face-to-face formats. Participation for program offering ranged from 0 to 16% of the study population. Participation data were consistent with survey results and showed participants' preference for correspondence formats even more strongly. Program offering attracted health-conscious participants with higher education and income levels. These data suggest that some community members will get interested and take part in low-cost, minimal contact programs for exercise and weight control. Future research efforts should focus on investigating ways to increase participation in brief or minimal contact programs, particularly among groups that may be difficult to reach and at high risk for the development of obesity.

The development of SisterTalk: a cable TV-delivered weight control program for black women.

Science.gov (United States)

Gans, Kim M; Kumanyika, Shiriki K; Lovell, H Joan; Risica, Patricia M; Goldman, Roberta; Odoms-Young, Angela; Strolla, Leslie O; Decaille, Donna O; Caron, Colleen; Lasater, Thomas M

2003-12-01

Overweight and obesity have reached epidemic proportions in the United States, with black women disproportionately affected. SisterTalk is a weight control program designed specifically for delivery to black women via cable TV. The theoretical and conceptual frameworks and formative research that guided the development and cultural tailoring of SisterTalk are described. Social Action Theory was applied in the development of SisterTalk along with a detailed behavioral analysis of the way that black women view weight and weight loss within the context of their cultural and social realities. The entire intervention development process was framed using this information, rather than by changing only superficial aspects of program delivery. Community networking and both qualitative and quantitative interview techniques from the fields of social marketing and cultural anthropology were used to involve black women from Boston in the design and implementation of a program that would be practical, appealing, and culturally sensitive. Also discussed are strategies for evaluating the program, and lessons learned that might have broader applicability are highlighted. The development of the SisterTalk program could provide a useful starting point for development of successful weight control programs for black women in other parts of the United States as well as for other ethnic and racial groups.

How Do School-Based Prevention Programs Impact Teachers? Findings from a Randomized Trial of an Integrated Classroom Management and Social-Emotional Program.

Science.gov (United States)

Domitrovich, Celene E; Bradshaw, Catherine P; Berg, Juliette K; Pas, Elise T; Becker, Kimberly D; Musci, Rashelle; Embry, Dennis D; Ialongo, Nicholas

2016-04-01

A number of classroom-based interventions have been developed to improve social and behavioral outcomes for students, yet few studies have examined how these programs impact the teachers who are implementing them. Impacts on teachers may affect students and therefore also serve as an important proximal outcome to examine. The current study draws upon data from a school-based randomized controlled trial testing the impact of two prevention programs. In one intervention condition, teachers were trained in the classroom behavior management program, PAX Good Behavior Game (PAX GBG). In a second intervention condition, teachers were trained to use an integrated program, referred to as PATHS to PAX, of the PAX GBG and a social and emotional learning curriculum called Promoting Alternative Thinking Strategies (PATHS©). This study aimed to determine whether both interventions positively impacted teachers, with a particular interest in the teachers' own beliefs and perceptions regarding self-efficacy, burnout, and social-emotional competence. The sample included 350 K-5 teachers across 27 schools (18 schools randomized to intervention, 9 to control). Multilevel latent growth curve analyses indicated that the PATHS to PAX condition generally demonstrated the most benefits to teachers, relative to both the control and PAX GBG conditions. These findings suggest that school-based preventive interventions can have a positive impact on teachers' beliefs and perceptions, particularly when the program includes a social-emotional component. Several possible mechanisms might account for the added benefit to teachers. Additional research is needed to better understand how these programs impact teachers, as well as students.

Status of the reliability centered maintenance program at Ontario Hydro's Bruce 'A' Nuclear Division

International Nuclear Information System (INIS)

Khan, I.

1995-01-01

Bruce A started a preventive maintenance (PM) quality improvement program in August of 1991. This initiative was taken to address the concerns expressed by the AECB and the Peer Audits finding. The concerns were on the quality of the Bruce A PM Program and its execution in the field. Reliability Centered Maintenance (RCM) analysis was selected as the PM program quality improvement and optimization technique. Therefore, RCM became a key component of Bruce A's Integrated PM program and maintenance strategy. As a result of RCM implementation, and improvements in the work planning and scheduling process, Bruce A is seeing downward trends in the corrective maintenance work load, maintenance preventable forced outages, overdue/missed PM tasks and corrective maintenance backlog. Control Room Operators have reported observing an improvement in systems and equipment response to transients. Other benefits include a documented, controlled and traceable PM program. In addition, the team approach required by RCM has started to improve staff confidence in the PM program which, in turn, is improving the compliance with the PM program. (author)

A Case Study on Cyber-security Program for the Programmable Logic Controller of Modern NPPs

International Nuclear Information System (INIS)

Song, S. H.; Lee, M. S.; Kim, T. H.; Park, C. H.; Park, S. P.; Kim, H. S.

2014-01-01

As instrumentation and control (I and C) systems for modern Nuclear Power Plants (NPPs) have been digitalized to cope with their growing complexity, the cyber-security has become an important issue. To protect the I and C systems adequately from cyber threats, such as Stuxnet that attacked Iran's nuclear facilities, regulations of many countries require a cyber-security program covering all the life cycle phases of the system development, from the concept to the retirement. This paper presents a case study of cyber-security program that has been performed during the development of the programmable logic controller (PLC) for modern NPPs of Korea. In the case study, a cyber-security plan, including technical, management, and operational controls, was established through a security risk assessment. Cyber-security activities, such as development of security functions and periodic inspections, were conducted according to the plan: the security functions were applied to the PLC as the technical controls, and periodic inspections and audits were held to check the security of the development environment, as the management and operational controls. A final penetration test was conducted to inspect all the security problems that had been issued during the development. The case study has shown that the systematic cyber-security program detected and removed the vulnerabilities of the target system, which could not be found otherwise, enhancing the cyber-security of the system

A Case Study on Cyber-security Program for the Programmable Logic Controller of Modern NPPs

Energy Technology Data Exchange (ETDEWEB)

Song, S. H. [Korea University, Seoul (Korea, Republic of); Lee, M. S.; Kim, T. H. [Formal Work Inc., Seoul (Korea, Republic of); Park, C. H. [LINE Corp., Tokyo (Japan); Park, S. P. [Ahnlab Inc., Seoul (Korea, Republic of); Kim, H. S. [Sejong University, Seoul (Korea, Republic of)

2014-08-15

As instrumentation and control (I and C) systems for modern Nuclear Power Plants (NPPs) have been digitalized to cope with their growing complexity, the cyber-security has become an important issue. To protect the I and C systems adequately from cyber threats, such as Stuxnet that attacked Iran's nuclear facilities, regulations of many countries require a cyber-security program covering all the life cycle phases of the system development, from the concept to the retirement. This paper presents a case study of cyber-security program that has been performed during the development of the programmable logic controller (PLC) for modern NPPs of Korea. In the case study, a cyber-security plan, including technical, management, and operational controls, was established through a security risk assessment. Cyber-security activities, such as development of security functions and periodic inspections, were conducted according to the plan: the security functions were applied to the PLC as the technical controls, and periodic inspections and audits were held to check the security of the development environment, as the management and operational controls. A final penetration test was conducted to inspect all the security problems that had been issued during the development. The case study has shown that the systematic cyber-security program detected and removed the vulnerabilities of the target system, which could not be found otherwise, enhancing the cyber-security of the system.

Pilot study comparing changes in postural control after training using a video game balance board program and 2 standard activity-based balance intervention programs.

Science.gov (United States)

Pluchino, Alessandra; Lee, Sae Yong; Asfour, Shihab; Roos, Bernard A; Signorile, Joseph F

2012-07-01

To compare the impacts of Tai Chi, a standard balance exercise program, and a video game balance board program on postural control and perceived falls risk. Randomized controlled trial. Research laboratory. Independent seniors (N=40; 72.5±8.40) began the training, 27 completed. Tai Chi, a standard balance exercise program, and a video game balance board program. The following were used as measures: Timed Up & Go, One-Leg Stance, functional reach, Tinetti Performance Oriented Mobility Assessment, force plate center of pressure (COP) and time to boundary, dynamic posturography (DP), Falls Risk for Older People-Community Setting, and Falls Efficacy Scale. No significant differences were seen between groups for any outcome measures at baseline, nor were significant time or group × time differences for any field test or questionnaire. No group × time differences were seen for any COP measures; however, significant time differences were seen for total COP, 3 of 4 anterior/posterior displacement and both velocity, and 1 displacement and 1 velocity medial/lateral measure across time for the entire sample. For DP, significant improvements in the overall score (dynamic movement analysis score), and in 2 of the 3 linear and angular measures were seen for the sample. The video game balance board program, which can be performed at home, was as effective as Tai Chi and the standard balance exercise program in improving postural control and balance dictated by the force plate postural sway and DP measures. This finding may have implications for exercise adherence because the at-home nature of the intervention eliminates many obstacles to exercise training. Copyright © 2012 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Coastal nonpoint pollution control program: Program development and approval guidance

International Nuclear Information System (INIS)

1993-01-01

The document, developed by NOAA and EPA, contains guidance for states in developing and implementing their coastal nonpoint pollutant source programs. It describes the requirements that must be met, including: the geographic scope of the program; the pollutant sources to be addressed; the types of management measures used; the establishment of critical areas; technical assistance, public participation, and administrative coordination; and, the process for program submission and Federal approval. The document also contains the criteria by which NOAA and EPA will review the states' submissions

Oak Ridge National Laboratory Radiation Control Program - Partners in Site Restoration

International Nuclear Information System (INIS)

Jones, S. L.; Stafford, M. W.

2002-01-01

In 1998, the U.S. Department of Energy (DOE) awarded the Management and Integration (M and I) contract for all five of the Oak Ridge Operations (ORO) facilities to Bechtel Jacobs Company LLC (BJC). At Oak Ridge National Laboratory (ORNL), a world renowned national laboratory and research and development facility, the BJC mission involves executing the DOE Environmental Management (EM) program. In addition to BJC's M and I contract, UT-Battelle, LLC, a not-for-profit company, is the Management and Operating (M and O) contractor for DOE on the ORNL site. As part of ORNL's EM program, legacy inactive facilities (i.e., reactors, nuclear material research facilities, burial grounds, and underground storage tanks) are transferred to BJC and are designated as remediation, decontamination and decommissioning (D and D), or long-term surveillance and maintenance (S and M) facilities. Facilities operated by both UT-Battelle and BJC are interspersed throughout the site and are usually in close proximity. Both UT-Battelle and BJC have DOE-approved Radiation Protection Programs established in accordance with 10 CFR 835. The BJC Radiological Control (RADCON) Program adapts to the M and I framework and is comprised of a combination of subcontracted program responsibilities with BJC oversight. This paper focuses on the successes and challenges of executing the BJC RADCON Program for BJC's ORNL Project through a joint M and I contractor relationship, while maintaining a positive working relationship and partnership with UT-Battelle's Radiation Protection organization

The international atom: evolution of radiation control programs.

Science.gov (United States)

Bradley, F J

2002-07-01

Under the Atoms for Peace program, Turkey received a one MWt swimming pool reactor in 1962 that initiated a health physics program for the reactor and a Radiation Control Program (RCP) for the country's use of ionizing radiation. Today, over 13,000 radiation workers, concentrated in the medical field, provide improved medical care with 6,200 x-ray units, including 494 CAT scanners, 222 radioimmunoassay (RIA) labs and 42 radiotherapy centers. Industry has a large stake in the safe use of ionizing radiation with over 1,200 x-ray and gamma radiography and fluoroscopic units, 2,500 gauges in automated process control and five irradiators. A 48-person RCP staff oversees this expanded radiation use. One incident involving a spent 3.3 TBq (88 Ci) 60Co source resulted in 10 overexposures but no fatalities. Taiwan received a 1.6 MWt swimming pool reactor in 1961 and rapidly applied nuclear technology to the medical and industrial fields. Today, there are approximately 24,000 licensed radiation workers in nuclear power field, industry, medicine and academia. Four BWRs and two PWRs supply about 25% of the island's electrical power needs. One traumatic event galvanized the RCP when an undetermined amount of 60Co was accidentally incorporated into reinforcing bars, which in turn were incorporated into residential and commercial buildings. Public exposures were estimated to range up to 15 mSv (1.3 rem) per annum. There were no reported ill effects, except possibly psychological, to date. The RCP now has instituted stringent control measures to ensure radiation-free dwellings and work places. Albania's RCP is described as it evolved since 1972. Regulations were promulgated which followed the IAEA Basic Safety Standards of that era. With 525 licenses and 600 radiation workers, the problem was not in the regulations per se but in their enforcement. The IAEA helped to upgrade the RCP as the economy evolved from one that was centrally planned economy to a free market economy. As this

Variable Displacement Control of the Concrete Pumping System Based on Dynamic Programming

Directory of Open Access Journals (Sweden)

Ye Min

2017-01-01

Full Text Available To solve the problems of cylinder piston striking cylinder and the hydraulic shocking of the main pump, and causing energy waste problem, the method of variable displacement control of piston stroke was proposed. In order to achieve effective control of the piston stroke, variable displacement control model was established under the physical constraint condition of non-collision between piston and cylinder. And the control process was realized by Dynamic Programming(DP, the simulation and test results show that piston of concrete pumping system don’t strike cylinder and reduce the hydraulic shock of the main pump outlet, meanwhile improve the response speed of the cylinder and achieve energy-saving purposes under varying loads. This control model built in the integration design space of structure variable and control variable is of guiding significance for solving open-loop system’s engineering problems.

The Swift Project Contamination Control Program: A Case Study of Balancing Cost, Schedule and Risk

Science.gov (United States)

Hansen, Patricia A.; Day, Diane T.; Secunda, Mark S.; Rosecrans, Glenn P.

2004-01-01

The Swift Observatory will be launched in early 2004 to examine the dynamic process of gamma ray burst (GRB) events. The multi-wavelength Observatory will study the GRB afterglow characteristics, which will help to answer fundamental questions about both the structure and the evolution of the universe. The Swift Observatory Contamination Control Program has been developed to aid in ensuring the success of the on-orbit performance of two of the primary instruments: the Ultraviolet and Optical Telescope (UVOT) and the X-Ray Telescope (XRT). During the design phase of the Observatory, the contamination control program evolved and trade studies were performed to assess the risk of contaminating the sensitive UVOT and XRT optics during both pre-launch testing and on-orbit operations, within the constraints of the overall program cost and schedule.

Stochastic optimal control in infinite dimension dynamic programming and HJB equations

CERN Document Server

Fabbri, Giorgio; Święch, Andrzej

2017-01-01

Providing an introduction to stochastic optimal control in infinite dimension, this book gives a complete account of the theory of second-order HJB equations in infinite-dimensional Hilbert spaces, focusing on its applicability to associated stochastic optimal control problems. It features a general introduction to optimal stochastic control, including basic results (e.g. the dynamic programming principle) with proofs, and provides examples of applications. A complete and up-to-date exposition of the existing theory of viscosity solutions and regular solutions of second-order HJB equations in Hilbert spaces is given, together with an extensive survey of other methods, with a full bibliography. In particular, Chapter 6, written by M. Fuhrman and G. Tessitore, surveys the theory of regular solutions of HJB equations arising in infinite-dimensional stochastic control, via BSDEs. The book is of interest to both pure and applied researchers working in the control theory of stochastic PDEs, and in PDEs in infinite ...

Project EX-India: A classroom-based tobacco use prevention and cessation intervention program.

Science.gov (United States)

Sidhu, Anupreet Kaur; Sussman, Steve; Tewari, Abha; Bassi, Shalini; Arora, Monika

2016-02-01

Tobacco use experimentation is most frequent between the ages of 15–24 in India. Therefore, programming to counteract tobacco use among adolescents is needed. There is a lack of evidence-based teen tobacco use prevention and cessation programs. The current study provides an outcome evaluation of the Project EX tobacco use prevention and cessation program among Indian adolescents (16–18 years). An eight-session classroom-based curriculum was adapted to the Indian context and translated from English to Hindi (local language). Next, it was tested using a quasi-experimental design with 624 Indian students at baseline, involving two program and two control schools, with a three-month post-program follow-up. Project EX involves motivation enhancement (e.g., talk shows and games) and coping skills (e.g., complementary and alternative medicine) components. Program participants rated complementary and alternative medicine (CAM) activities like meditation, yoga and healthy breathing higher than talk shows and games. Compared to the standard care control condition, the program condition revealed a prevention effect, but not a cessation effect. Implications for prevention/cessation programming among Indian teens are discussed. This study was approved by the Independent Ethics Committee, Mumbai.

Prevention of Cyberbullying and Cyber Victimization: Evaluation of the ViSC Social Competence Program

Science.gov (United States)

Gradinger, Petra; Yanagida, Takuya; Strohmeier, Dagmar; Spiel, Christiane

2015-01-01

It is well-documented that cyberbullying and victimization co-occur with traditional forms indicating that they share similar mechanisms. Therefore, it was hypothesized that the general antibullying program ViSC might also be effective in tackling these new forms of bullying. A longitudinal randomized control group design has been applied to…

Multilevel Approach of a 1-Year Program of Dietary and Exercise Interventions on Bone Mineral Content and Density in Metabolic Syndrome – the RESOLVE Randomized Controlled Trial

Science.gov (United States)

Courteix, Daniel; Valente-dos-Santos, João; Ferry, Béatrice; Lac, Gérard; Lesourd, Bruno; Chapier, Robert; Naughton, Geraldine; Marceau, Geoffroy; João Coelho-e-Silva, Manuel; Vinet, Agnès; Walther, Guillaume; Obert, Philippe; Dutheil, Frédéric

2015-01-01

Background Weight loss is a public health concern in obesity-related diseases such as metabolic syndrome (MetS). However, restrictive diets might induce bone loss. The nature of exercise and whether exercise with weight loss programs can protect against potential bone mass deficits remains unclear. Moreover, compliance is essential in intervention programs. Thus, we aimed to investigate the effects that modality and exercise compliance have on bone mineral content (BMC) and density (BMD). Methods We investigated 90 individuals with MetS who were recruited for the 1-year RESOLVE trial. Community-dwelling seniors with MetS were randomly assigned into three different modalities of exercise (intensive resistance, intensive endurance, moderate mixed) combined with a restrictive diet. They were compared to 44 healthy controls who did not undergo the intervention. Results This intensive lifestyle intervention (15–20 hours of training/week + restrictive diet) resulted in weight loss, body composition changes and health improvements. Baseline BMC and BMD for total body, lumbar spine and femoral neck did not differ between MetS groups and between MetS and controls. Despite changes over time, BMC or BMD did not differ between the three modalities of exercise and when compared with the controls. However, independent of exercise modality, compliant participants increased their BMC and BMD compared with their less compliant peers. Decreases in total body lean mass and negative energy balance significantly and independently contributed to decreases in lumbar spine BMC. Conclusion After the one year intervention, differences relating to exercise modalities were not evident. However, compliance with an intensive exercise program resulted in a significantly higher bone mass during energy restriction than non-compliance. Exercise is therefore beneficial to bone in the context of a weight loss program. Trial Registration ClinicalTrials.gov NCT00917917 PMID:26376093

Impact of a diabetes disease management program on diabetes control and patient quality of life.

Science.gov (United States)

Rasekaba, Tshepo Mokuedi; Graco, Marnie; Risteski, Chrissie; Jasper, Andrea; Berlowitz, David J; Hawthorne, Graeme; Hutchinson, Anastasia

2012-02-01

The worldwide burden of diabetes is projected to be 5.4% of the adult population by the year 2025. Diabetes is associated with multiple medical complications that both decrease health-related quality of life (HR-QOL) and contribute to earlier mortality. There is growing evidence for the effectiveness of multidisciplinary disease management programs that incorporate self-management principles in improving patients' long-term outcomes. The aim of this project was to evaluate the effectiveness of this approach in improving: (1) glycemic control measured by HbA1c, and (2) HR-QOL measured by the Assessment of Quality of Life (AQOL), at enrollment and at 12-months follow-up. Between 2004 and 2008, a total of 967 patients were enrolled in the program; 545 (56%) of these patients had HbA1c data available at baseline and at 12 months. Mean HbA1c at enrollment was 8.6% (SD 1.9) versus 7.3% (SD 1.2) at 12 months (Pmanagement program for patients with poorly controlled type 2 diabetes can improve both glycemic control and HR-QOL.

Surveying managers to inform a regionally relevant invasive Phragmites australis control research program.

Science.gov (United States)

Rohal, C B; Kettenring, K M; Sims, K; Hazelton, E L G; Ma, Z

2018-01-15

Managers of invasive species consider the peer-reviewed literature only moderately helpful for guiding their management programs. Though this "knowing-doing gap" has been well-described, there have been few efforts to guide scientists in how to develop useful and usable science. Here we demonstrate how a comprehensive survey of managers (representing 42 wetland management units across the Great Salt Lake watershed) can highlight management practices and challenges (here for the widespread invasive plant, Phragmites australis, a recent and aggressive invader in this region) to ultimately inform a research program. The diversity of surveyed organizations had wide-ranging amounts of Phragmites which led to different goals and approaches including more aggressive control targets and a wider array of control tools for smaller, private organizations compared to larger government-run properties. We found that nearly all managers (97%) used herbicide as their primary Phragmites control tool, while burning (65%), livestock grazing (49%), and mowing (43%) were also frequently used. Managers expressed uncertainties regarding the timing of herbicide application and type of herbicide for effective control. Trade-offs between different Phragmites treatments were driven by budgetary concerns, as well as environmental conditions like water levels and social constraints like permitting issues. Managers had specific ideas about the plant communities they desired following Phragmites control, yet revegetation of native species was rarely attempted. The results of this survey informed the development of large-scale, multi-year Phragmites control and native plant revegetation experiments to address management uncertainties regarding herbicide type and timing. The survey also facilitated initial scientist-manager communication, which led to collaborations and knowledge co-production between managers and researchers. An important outcome of the survey was that experimental results were

Using GPS instruments and GIS techniques in data management for insect pest control programs

International Nuclear Information System (INIS)

2006-01-01

This interactive tutorial CD entitled 'Using GPS Instruments and GIS Techniques in Data Management for Insect Pest Control Programs' was developed by Micha silver of the Arava Development Co., Sapir, Israel, and includes step-by-step hands on lessons on the use of GPS/GIS in support of area-wide pest control operations

The PLE(2)NO self-management and exercise program for knee osteoarthritis: Study Protocol for a Randomized Controlled Trial.

Science.gov (United States)

Marconcin, Priscila; Espanha, Margarida; Yázigi, Flávia; Campos, Pedro

2016-06-07

International recommendations suggest exercise and self-management programs, including non-pharmacological treatments, for knee osteoarthritis (KOA) because they can benefit pain relief and improve function and exercise adherence. The implementation of a combined self-management and exercise program termed PLE(2)NO may be a good method for controlling KOA symptoms because it encourages the development of self-efficacy to manage the pathology. This study will assess the effects of a self-management and exercise program in comparison to an educational intervention (control program) on symptoms, physical fitness, health-related quality of life, self-management behaviors, self-efficacy, physical activity level and coping strategies. This PLE(2)NO study is a single-blinded, randomized controlled trial of elderly (aged above 60 yrs old) patients with clinical and radiographic KOA. The patients will be allocated into either an educational group (control) or a self-management and exercise group (experimental). All participants will receive a supplement of chondroitin and glucosamine sulfates. This paper describes the protocol that will be used in the PLE(2)NO program. This program has several strengths. First, it involves a combination of self-management and exercise approaches, is available in close proximity to the patients and occurs over a short period of time. The latter two characteristics are crucial for maintaining participant adherence. Exercise components will be implemented using low-cost resources that permit their widespread application. Moreover, the program will provide guidance regarding the effectiveness of using a self-management and exercise program to control KOA symptoms and improve self-efficacy and health-related quality of life. NCT02562833 (09/23/2015).