WorldWideScience

Sample records for control part

  1. Controlled parts management

    International Nuclear Information System (INIS)

    Boyle, C.M.; Hidalgo, S.P.; Martinez, B.J.

    2004-01-01

    The Controlled Parts Management (CPM) system is based on industry standard practices for managing inventory. CPM is designed to record the movement of any type of inventory in a defined region referred to as an Account or SubAccount. The system is used to track the receiving, processing, storing and transfer of inventory parts. CPM provides information on parts, quantity and the exact location of the inventory. CPM is a barcode-based-part tracking system currently used to track controlled parts that are used in the R and D and testing of weapons; this tracking helps maintain the part pedigree that is required for certification of a weapon or weapon test. CPM includes bar code data collection software programmed into portable bar code readers for automating physical inventory services and remote transaction capture. CPM interfaces to other Engineering systems and supports a 'material content' of a weapons test through the test Bill of Materials and assignment of a unique inventory part in CPM. Additional functionality includes the ability to group or join parts, logically or physically and temporary or permanent, to represent discrete parts, containers, subassemblies and assemblies, and groupings.

  2. Stimulus control: Part I

    OpenAIRE

    Dinsmoor, James A.

    1995-01-01

    In his effort to distinguish operant from respondent conditioning, Skinner stressed the lack of an eliciting stimulus and rejected the prevailing stereotype of Pavlovian “stimulus—response” psychology. But control by antecedent stimuli, whether classified as conditional or discriminative, is ubiquitous in the natural setting. With both respondent and operant behavior, symmetrical gradients of generalization along unrelated dimensions may be obtained following differential reinforcement in the...

  3. Mosquito Control: Do Your Part

    Centers for Disease Control (CDC) Podcasts

    Everyone can do their part to help control mosquitoes that can carry viruses like West Nile, Zika, dengue and chikungunya. In each episode of this podcast, you will learn ways to help reduce the number of mosquitoes in and around your home.

  4. Trust Control of VTOL Aircraft Part Deux

    Science.gov (United States)

    Dugan, Daniel C.

    2014-01-01

    Thrust control of Vertical Takeoff and Landing (VTOL) aircraft has always been a debatable issue. In most cases, it comes down to the fundamental question of throttle versus collective. Some aircraft used throttle(s), with a fore and aft longitudinal motion, some had collectives, some have used Thrust Levers where the protocol is still "Up is Up and Down is Down," and some have incorporated both throttles and collectives when designers did not want to deal with the Human Factors issues. There have even been combinations of throttles that incorporated an arc that have been met with varying degrees of success. A previous review was made of nineteen designs without attempting to judge the merits of the controller. Included in this paper are twelve designs entered in competition for the 1961 Tri-Service VTOL transport. Entries were from a Bell/Lockheed tiltduct, a North American tiltwing, a Vanguard liftfan, and even a Sikorsky tiltwing. Additional designs were submitted from Boeing Wichita (direct lift), Ling-Temco-Vought with its XC-142 tiltwing, Boeing Vertol's tiltwing, Mcdonnell's compound and tiltwing, and the Douglas turboduct and turboprop designs. A private party submitted a re-design of the Breguet 941 as a VTOL transport. It is important to document these 53 year-old designs to preserve a part of this country's aviation heritage.

  5. Connecting inventory control and repair shop control : a differentiated control structure for repairable spare parts

    NARCIS (Netherlands)

    Driessen, M.A.; Rustenburg, W.D.; Houtum, van G.J.J.A.N.; Wiers, V.C.S.

    2014-01-01

    This paper presents a control structure for integrating decisions on spare parts inventory control and the control of repair shops for maintenance spare parts. A dierentiated control structure is proposed for the various repair shop types recognized in practice. Decisions functions are mapped and

  6. Maintenance Centered Service Parts Inventory Control

    NARCIS (Netherlands)

    W.L. van Jaarsveld (Willem)

    2013-01-01

    textabstractHigh-tech capital goods enable the production of many services and articles that have become a part of our daily lives. Examples include the refineries that produce the gasoline we put in our cars, the photolithography systems that enable the production of the chips in our cell phones

  7. Intelligent control of HVAC systems. Part I: Modeling and synthesis

    Directory of Open Access Journals (Sweden)

    Adrian TOADER

    2013-03-01

    Full Text Available This is the first part of a work on intelligent type control of Heating, Ventilating and Air-Conditioning (HVAC systems. The study is performed from the perspective of giving a unitary control method to ensure high energy efficiency and air quality improving. To illustrate the proposed HVAC control technique, in this first part it is considered as benchmark problem a single thermal space HVAC system. The construction of the mathematical model is performed only with a view to obtain a framework of HVAC intelligent control validation by numerical simulations. The latter will be reported in a second part of the study.

  8. Model Development for Auto Spare Parts Inventory Control and ...

    African Journals Online (AJOL)

    2012-12-01

    Dec 1, 2012 ... essential motivating factors for providing control in manufacturing companies has never showed any sign ... The management of these parts can only be done with the aid of a computer; ... perform a discrete event simulation of.

  9. Inventory Control of Spare Parts for Operating Nuclear Power plants

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jong-Hyuck; Jang, Se-Jin; Hwang, Eui-Youp; Yoo, Sung-Soo; Yoo, Keun-Bae; Lee, Sang-Guk; Hong, Sung-Yull [Korea Electric Power Research Institute, Taejon (Korea, Republic of)

    2006-07-01

    Inventory control of spare parts plays an increasingly important role in operation management. The trade-off is clear: on one hand a large number of spare parts ties up a large amount of capital, while on the other hand too little inventory may result in extremely costly emergency actions. This is why during the last few decades inventory of spare parts control has been the topics of many publications. Recently management systems such as manufacturing resources planning (MRP) and enterprise resource planning (ERP) have been added. However, most of these contributions have similar theoretical background. This means the concepts and techniques are mainly based on mathematical assumptions and modeling inventory of spare parts situations Nuclear utilities in Korea have several problems to manage the optimum level of spare parts though they used MRP System. Because most of items have long lead time and they are imported from United States, Canada, France and so on. In this paper, we will examine the available inventory optimization models which are applicable to nuclear power plant and then select optimum model and assumptions to make inventory of spare parts strategies. Then we develop the computer program to select and determine optimum level of spare parts which should be automatically controlled by KHNP ERP system. The main contribution of this paper is an inventory of spare parts control model development, which can be applied to nuclear power plants in Korea.

  10. Inventory Control of Spare Parts for Operating Nuclear Power plants

    International Nuclear Information System (INIS)

    Park, Jong-Hyuck; Jang, Se-Jin; Hwang, Eui-Youp; Yoo, Sung-Soo; Yoo, Keun-Bae; Lee, Sang-Guk; Hong, Sung-Yull

    2006-01-01

    Inventory control of spare parts plays an increasingly important role in operation management. The trade-off is clear: on one hand a large number of spare parts ties up a large amount of capital, while on the other hand too little inventory may result in extremely costly emergency actions. This is why during the last few decades inventory of spare parts control has been the topics of many publications. Recently management systems such as manufacturing resources planning (MRP) and enterprise resource planning (ERP) have been added. However, most of these contributions have similar theoretical background. This means the concepts and techniques are mainly based on mathematical assumptions and modeling inventory of spare parts situations Nuclear utilities in Korea have several problems to manage the optimum level of spare parts though they used MRP System. Because most of items have long lead time and they are imported from United States, Canada, France and so on. In this paper, we will examine the available inventory optimization models which are applicable to nuclear power plant and then select optimum model and assumptions to make inventory of spare parts strategies. Then we develop the computer program to select and determine optimum level of spare parts which should be automatically controlled by KHNP ERP system. The main contribution of this paper is an inventory of spare parts control model development, which can be applied to nuclear power plants in Korea

  11. Quality control of injection moulded micro mechanical parts

    DEFF Research Database (Denmark)

    Gasparin, Stefania; Tosello, Guido; Hansen, Hans Nørgaard

    2009-01-01

    Quality control of micro components is an increasing challenge. Smaller mechanical parts are characterized by smaller tolerance to be verified. This paper focuses on the dimensional verification of micro injection moulded components selected from an industrial application. These parts are measured...... using an Optical Coordinate Measuring Machine (OCMM), which guarantees fast surface scans suitable for in line quality control. The uncertainty assessment of the measurements is calculated following the substitution method. To investigate the influence parameters in optical coordinate metrology two...

  12. Contradictions of Control, Part 1: Administrators and Teachers.

    Science.gov (United States)

    McNeil, Linda M.

    1988-01-01

    Bureaucratic controls are at war with educational goals in our school system. This disharmony drastically affects the teacher/student relationship. The first in a three-part series, this article summarizes complex ethnographic data from the report "Contradictions of Control: School Structure and School Knowledge." Includes 6 references. (MD)

  13. Intelligent control of HVAC systems. Part II: perceptron performance analysis

    Directory of Open Access Journals (Sweden)

    Ioan URSU

    2013-09-01

    Full Text Available This is the second part of a paper on intelligent type control of Heating, Ventilating, and Air-Conditioning (HVAC systems. The whole study proposes a unified approach in the design of intelligent control for such systems, to ensure high energy efficiency and air quality improving. In the first part of the study it is considered as benchmark system a single thermal space HVAC system, for which it is assigned a mathematical model of the controlled system and a mathematical model(algorithm of intelligent control synthesis. The conception of the intelligent control is of switching type, between a simple neural network, a perceptron, which aims to decrease (optimize a cost index,and a fuzzy logic component, having supervisory antisaturating role for neuro-control. Based on numerical simulations, this Part II focuses on the analysis of system operation in the presence only ofthe neural control component. Working of the entire neuro-fuzzy system will be reported in a third part of the study.

  14. Controlled Nonlinear Stochastic Delay Equations: Part I: Modeling and Approximations

    International Nuclear Information System (INIS)

    Kushner, Harold J.

    2012-01-01

    This two-part paper deals with “foundational” issues that have not been previously considered in the modeling and numerical optimization of nonlinear stochastic delay systems. There are new classes of models, such as those with nonlinear functions of several controls (such as products), each with is own delay, controlled random Poisson measure driving terms, admissions control with delayed retrials, and others. There are two basic and interconnected themes for these models. The first, dealt with in this part, concerns the definition of admissible control. The classical definition of an admissible control as a nonanticipative relaxed control is inadequate for these models and needs to be extended. This is needed for the convergence proofs of numerical approximations for optimal controls as well as to have a well-defined model. It is shown that the new classes of admissible controls do not enlarge the range of the value functions, is closed (together with the associated paths) under weak convergence, and is approximatable by ordinary controls. The second theme, dealt with in Part II, concerns transportation equation representations, and their role in the development of numerical algorithms with much reduced memory and computational requirements.

  15. Quality assurance in a cask fleet parts control system

    International Nuclear Information System (INIS)

    Fernandez, C.; Shappert, L.B.

    1992-01-01

    This paper discusses applicable portions of the eighteen Quality Assurance criteria of Subpart H, 10 CFR 71 which are incorporated into a relational data base system which has been designed to manage the spare parts control system for a fleet of spent nuclear fuel casks. The system includes not only parts in warehouse storage but parts in use in the field plus casks, ancillary equipment, test equipment, support devices, and even personnel. It provides a high degree of assurance that any device for which a condition for certification has expired will be flagged for recertification testing or removal from service well before the critical date

  16. Quality assurance in a cask fleet parts control system

    International Nuclear Information System (INIS)

    Fernandez, C.; McCreery, P.N.; Shappert, L.B.

    1991-01-01

    Applicable portions of the eighteen Quality Assurance criteria of Subpart H, 10 CFR 71 are incorporated into a relational data base system which has been designed to manage the spare parts control system for a fleet of spent nuclear fuel casks. The system includes not only parts in warehouse storage but parts in use in the field plus casks, ancillary equipment, test equipment, support devices, and even personnel. It provides a high degree of assurance that any device for which a condition for certification has expired will be flagged for recertification testing or removal from service well before the critical date

  17. Factors affecting sustainable animal trypanosomosis control in parts ...

    African Journals Online (AJOL)

    This study examined the factors affecting sustainable trypanosomiasis control in parts of Kaduna State within the sub-humid savannah ecological zone of Nigeria. Focus group discussions were ... More awareness and preference for pour-on and aerial spraying were higher than the use of traps, target or screens. Rearing of ...

  18. Controlling Precision Stepper Motors in Flight Using (Almost) No Parts

    Science.gov (United States)

    Randall, David

    2010-01-01

    This concept allows control of high-performance stepper motors with minimal parts count and minimal flight software complexity. Although it uses a small number of common flight-qualified parts and simple control algorithms, it is capable enough to meet demanding system requirements. Its programmable nature makes it trivial to implement changes to control algorithms both during integration & test and in flight. Enhancements such as microstepping, half stepping, back-emf compensation, and jitter reduction can be tailored to the requirements of a large variety of stepper motor based applications including filter wheels, focus mechanisms, antenna tracking subsystems, pointing and mobility. The hardware design (using an H-bridge motor controller IC) was adapted from JPL's MER mission, still operating on Mars. This concept has been fully developed and incorporated into the MCS instrument on MRO, currently operating in Mars orbit. It has been incorporated into the filter wheel mechanism and linear stage (focus) mechanism for the AMT instrument. On MCS/MRO, two of these circuits control the elevation and azimuth of the MCS telescope/radiometer assembly, allowing the instrument to continuously monitor the limb of the Martian atmosphere. Implementation on MCS/MRO resulted in a 4:1 reduction in the volume and mass required for the motor driver electronics (100:25 square inches of PCB space), producing a very compact instrument. In fact, all of the electronics for the MCS instrument are packaged within the movable instrument structure. It also saved approximately 3 Watts of power. Most importantly, the design enabled MCS to meet very its stringent maximum allowable torque disturbance requirements.

  19. MINIMIZING GLOVEBOX GLOVE BREACHES, PART IV: CONTROL CHARTS

    International Nuclear Information System (INIS)

    Cournoyer, Michael E.; Lee, Michelle B.; Schreiber, Stephen B.

    2007-01-01

    At the Los Alamos National Laboratory (LANL) Plutonium Facility, plutonium. isotopes and other actinides are handled in a glovebox environment. The spread of radiological contamination, and excursions of contaminants into the worker's breathing zone, are minimized and/or prevented through the use of glovebox technology. Evaluating the glovebox configuration, the glovebo gloves are the most vulnerable part of this engineering control. Recognizing this vulnerability, the Glovebox Glove Integrity Program (GGIP) was developed to minimize and/or prevent unplanned openings in the glovebox environment, i.e., glove failures and breaches. In addition, LANL implement the 'Lean Six Sigma (LSS)' program that incorporates the practices of Lean Manufacturing and Six Sigma technologies and tools to effectively improve administrative and engineering controls and work processes. One tool used in LSS is the use of control charts, which is an effective way to characterize data collected from unplanned openings in the glovebox environment. The benefit management receives from using this tool is two-fold. First, control charts signal the absence or presence of systematic variations that result in process instability, in relation to glovebox glove breaches and failures. Second, these graphical representations of process variation detennine whether an improved process is under control. Further, control charts are used to identify statistically significant variations (trends) that can be used in decision making to improve processes. This paper discusses performance indicators assessed by the use control charts, provides examples of control charts, and shows how managers use the results to make decisions. This effort contributes to LANL Continuous Improvement Program by improving the efficiency, cost effectiveness, and formality of glovebox operations.

  20. A survey on control schemes for distributed solar collector fields. Part II: Advanced control approaches

    Energy Technology Data Exchange (ETDEWEB)

    Camacho, E.F.; Rubio, F.R. [Universidad de Sevilla, Escuela Superior de Ingenieros, Departamento de Ingenieria de Sistemas y Automatica, Camino de Los Descubrimientos s/n, E-41092 Sevilla (Spain); Berenguel, M. [Universidad de Almeria, Departamento de Lenguajes y Computacion, Area de Ingenieria de Sistemas y Automatica, Carretera Sacramento s/n, E-04120 La Canada, Almeria (Spain); Valenzuela, L. [Plataforma Solar de Almeria - CIEMAT, Carretera Senes s/n, P.O. Box 22, E-04200 Tabernas (Almeria) (Spain)

    2007-10-15

    This article presents a survey of the different advanced automatic control techniques that have been applied to control the outlet temperature of solar plants with distributed collectors during the last 25 years. A classification of the modeling and control approaches described in the first part of this survey is used to explain the main features of each strategy. The treated strategies range from classical advanced control strategies to those with few industrial applications. (author)

  1. Iron ore sintering. Part 3: Automatic and control systems

    Directory of Open Access Journals (Sweden)

    Alejandro Cores

    2015-01-01

    Full Text Available El proceso de sinterización implica un gran número de parámetros, más de quinientos, cada uno de los cuales ejerce una mayor o menor influencia y necesita ser controlado, dentro de los límites posibles, con el fin de optimizar la productividad, la estabilidad del proceso, y la composición y la calidad de la sinterizado producido. Para cumplir con la legislación ambiental, un sistema de control de la contaminación debe monitorizar la composición de las partículas y los gases generados en la planta de sinterización y emitidos a la atmósfera. Los sistemas de automatización y control son herramientas vitales para ayudar a los operadores de la planta en el seguimiento de cada etapa del proceso de producción de sinterizado.

  2. [Scientific reductionism and social control of mind. Part II].

    Science.gov (United States)

    Viniegra Velázquez, Leonardo

    In the second part of this essay, the progressive subordination of scientific endeavor and knowledge of business and profit is pointed out. For instance, the way facts are prioritized over concepts and ideas in scientific knowledge can translate into technological innovation, central to enterprise competitiveness and key to social mechanisms of control (military, cybernetic, ideological). Overcoming the scientific reductionism approach indicates recognizing the need to define progress in another way, one that infuses scientific knowledge with real liberating and inquisitive power. Power is essential in the search for a more collaborative, inclusive and pluralistic society where respect for human dignity and care for the ecosystem that we live in are prioritized. Copyright © 2014 Hospital Infantil de México Federico Gómez. Publicado por Masson Doyma México S.A. All rights reserved.

  3. Additive Manufacturing: Multi Material Processing and Part Quality Control

    DEFF Research Database (Denmark)

    Pedersen, David Bue

    This Ph.D dissertation,ffAdditive Manufacturing: Multi Material Processing and Part Quality Controlff, deal with Additive Manufacturing technologies which is a common name for a series of processes that are recognized by being computer controlled, highly automated, and manufacture objects...... by a layered deposition of material. Two areas of particular interest is addressed. They are rooted in two very different areas, yet is intended to fuel the same goal. To help Additive Manufacturing technologies one step closer to becoming the autonomous, digital manufacturing method of tomorrow. Vision...... systems A paradox exist in the field of Additive Manufacturing. The technologies allow for close-to unrestrained and integral geometrical freedom. Almost any geometry can be manufactured fast, e"ciently and cheap. Something that has been missing fundamental capability since the entering of the industrial...

  4. Controle Remoto: principio de funcionamento (parte 1 de 2

    Directory of Open Access Journals (Sweden)

    Marisa Almeida Cavalcante

    2013-10-01

    Full Text Available http://dx.doi.org/10.5007/2175-7941.2013v30n3p554 Este trabalho tem como principal objetivo a difusão da utilização do micro-controlador Arduino, no ensino e aprendizagem de Física Moderna. Para isso, elaboramos uma sequência didática com o objetivo de explorar o funcionamento de controles remoto. Esta sequência será apresentada em dois módulos; o primeiro deles destinado ao estudo dos fenômenos físicos envolvidos na transmissão de sinais sem fio por meio de radiação infravermelha e, que será objeto desta 1ª parte do artigo. O segundo módulo destinado à compreensão do modelo associado à lógica e interpretação dos sinais pelo receptor infravermelho. Para este último, atividades são desenvolvidas acoplando o receptor IR da serie PNA4601M ao micro-controlador Arduino, que interpreta e executa ações a partir dos códigos recebidos. Todos os experimentos propostos nestes módulos visam tornar possível a compreensão não apenas do funcionamento de um controle remoto, mas de todo o processo de comunicação envolvido e dos diferentes comandos/códigos advindos de cada tecla. Pretendemos, com isso, explorar conceitos de física a partir de instrumentos e aplicações tecnológicas presentes no dia a dia dos estudantes, tornando as aulas de Física mais dinâmicas e motivadoras.

  5. Active Vibration Control of Plate Partly Treated with ACLD Using Hybrid Control

    Directory of Open Access Journals (Sweden)

    Dongdong Zhang

    2014-01-01

    Full Text Available A finite element model of plate partly treated with ACLD treatments is developed based on the constitutive equations of elastic, piezoelectric, viscoelastic materials and Hamilton’s principle. The Golla-Hughes-Mctavish (GHM method is employed to describe the frequency-dependent characteristics of viscoelastic material (VEM. A model reduction is completed by using iterative dynamic condensation and balance model reduction method to design an effective control system. The emphasis is concerned on hybrid (combined feedback/feedforward control system to attenuate the vibration of plates with ACLD treatments. The optimal linear quadratic Gaussian (LQG controller is considered as a feedback channel and the adaptive filtered-reference LMS (FxLMS controller is used as a feedforward channel. They can be utilized individually or in a hybrid way to suppress the vibration of plate/ACLD system. The results show that the hybrid controller which combines feedback/feedforward together can reduce the displacement amplitude of plate/ACLD system subjected to a complicated disturbance substantially without requiring more control effort. Furthermore, the hybrid controller has more rapid and stable convergence rate than the adaptive feedforward FxLMS controller. Meanwhile, perfect robustness to phase error of the cancellation path in feedforward controller and the weight matrices in feedback LQG controller is demonstrated in proposed hybrid controller. Therefore, its application in structural engineering can be highly appreciated.

  6. An expert system for spare parts inventory control

    International Nuclear Information System (INIS)

    Kim, K.Y.; Chen, P.Y.C.; Okrent, D.

    1987-01-01

    This paper describes an expert system which can handle spare part requirements not only in corrective maintenance (CM) or preventive maintenance (PM), but also when failure rates of components or parts are updated by new data or by predictive maintenance (PDM), and which can also decide optimum stocking level of each spare part. This expert system provides a maintenance (or inventory) manager with an improved basis for decision making in the maintenance related to spare parts. The definitions of PM and PDM from NUREG-1212 (USNRC 1986) are used herein. This expert system used Intellignece/Compiler (Intelligence Ware, 1986) as a language/tool in the IBM-PC

  7. Advanced Control Architectures for Intelligent MicroGrids, Part I

    DEFF Research Database (Denmark)

    Guerrero, Josep M.; Chandorkar, Mukul; Lee, Tzung-Lin

    2013-01-01

    This paper presents a review of advanced control techniques for microgrids. The paper covers decentralized, distributed, and hierarchical control of grid connected and islanded microgrids. At first, decentralized control techniques for microgrids are reviewed. Then, the recent developments in the...

  8. Part-load pumping operation, control and behaviour

    International Nuclear Information System (INIS)

    1988-01-01

    Twenty one papers are printed. Their main concern is with pump performance under abnormal operating conditions or when operating at part-load. The effect of part-load operation on pump performance, pump internal flow and pump cavitation and noise were considered. The pumps considered are used in a variety of situations and some case studies were discussed. One paper about part-load operation of the boiler pumps for French pressurized water reactors and one paper on pressure pulsations of centrifugal pumps at very low flowrate, are indexed separately. (U.K.)

  9. Parts, Materials, and Processes Control Program for Expendable Launch Vehicles

    Science.gov (United States)

    2015-05-21

    cycle cost ; and 4. Improve procurement and test of small quantities of parts and materials that meet system requirements. This document supersedes...the reliability of program PMP to reduce PMP failures at all levels of assembly and test 3. Reduce program lifecycle cost 4. Improve procurement and...part shall be procured in single lots directly from the manufacturer or its authorized franchised distributor. The contractor shall be able to

  10. Process and part filling control in micro injection molding

    DEFF Research Database (Denmark)

    Tosello, Guido; Hansen, Hans Nørgaard; Schoth, Andreas

    2008-01-01

    The influence of process parameters on μ-injection molding (μIM) and on μ-injection molded parts has been investigated using Design of Experiments. A mold with a sensor applied at injection location was used to monitor actual injection pressure and to determine the cavity filling time. Flow markers...... position was measured on the polymer μ-parts to evaluate filling behavior of the polymer melt flowing through μ-features. Experimental results obtained under different processing conditions were evaluated to correlate the process parameter levels influence on the selected responses. Results showed...... that the injection speed in one of the most influencing process parameters on the μIM process and on the μ-parts filling....

  11. Monolithic Controlled Delivery Systems: Part I. Basic Characteristics and Mechanisms

    Directory of Open Access Journals (Sweden)

    Rumiana Blagoeva

    2006-04-01

    Full Text Available The article considers contemporary systems for controlled delivery of active agents, such as drugs, agricultural chemicals, pollutants and additives in the environment. A useful classification of the available controlled release systems (CRS is proposed according to the type of control (passive, active or self-preprogrammed and according to the main controlling mechanism (diffusion, swelling, dissolution or erosion. Special attention is given to some of the most used CRS - polymer monoliths. The structural and physical-chemical characteristics of CRS as well as the basic approaches to their production are examined. The basic mechanisms of controlled agent release are reviewed in detail and factors influencing the release kinetics are classified according to their importance. The present study can be helpful for understanding and applying the available mathematical models and for developing more comprehensive ones intended for design of new controlled delivery systems.

  12. Spare parts inventory control under system availability constraints

    NARCIS (Netherlands)

    Houtum, van G.J.J.A.N.; Kranenburg, A.A.

    2015-01-01

    This book focuses on the tactical planning level for spare parts management. It describes a series of multi-item inventory models and presents exact and heuristic optimization methods, including greedy heuristics that work well for real, life-sized problems. The intended audience consists of

  13. Integral inventory control in spare parts networks with capacity restrictions

    NARCIS (Netherlands)

    Sleptchenko, Andrei

    2002-01-01

    Integral inventory control of repairable items in service networks can result in a significant gain compared to traditional local control mechanisms, in terms of both efficiency and customer service. Research on quantitative decision support models has yielded various useful results. However, in

  14. Analysis of Offshore Knuckle Boom Crane - Part Two: Motion Control

    Directory of Open Access Journals (Sweden)

    Morten K. Bak

    2013-10-01

    Full Text Available In this paper design of electro-hydraulic motion control systems for offshore knuckle boom cranes is discussed. The influence of the control valve bandwidth along with the ramp time for the control signal are investigated both analytically with simplified system models and numerically with an experimentally verified crane model. The results of both types of investigations are related to general design rules for selection of control valves and ramp times and the relevance of these design rules is discussed. Generally, they are useful but may be too conservative for offshore knuckle boom cranes. However, as demonstrated in the paper, the only proper way to determine this is to evaluate the motion control system design by means of simulation.

  15. A method of numerically controlled machine part programming

    Science.gov (United States)

    1970-01-01

    Computer program is designed for automatically programmed tools. Preprocessor computes desired tool path and postprocessor computes actual commands causing machine tool to follow specific path. It is used on a Cincinnati ATC-430 numerically controlled machine tool.

  16. Electronic Control Of Small Hydro-Generators Part II

    International Nuclear Information System (INIS)

    Diaz B, Pedro; Torres M, Carlos A.

    1994-01-01

    The present project arises for the Colombian population's necessity to overcome the underdevelopment, the poverty, the education and the level of life in rural areas of difficult access, for an economic rural electrification. The UIS, by means of the advisory committee of investigations of the ability of Physical-mechanical Sciences and the ability of Electricity and Electronic, it begins the process of developing in 1991 a study of economic and reliable control for the handling of small micro-centrals. Providing from electric power to the rural sector is a world problem, and have more than enough this some countries (China, Nepal, Peru, The islands of Papua, New Guinea), they have made investigations, outlining and building central micro controlled by microprocessor. The present study is developed with the objective of carrying out a load control that acts reliable and quickly. Traditionally they have been come using mechanical governors, which are those in charge of making the load control by means of valves that regulate the flow of water in the turbines, involving this way big retards characteristic of any mechanical control. In summary, the electronic governor of load presents on the mechanical governor, the advantage of acting to more speed and consequently to maintain stable the frequency of the system. To continue with the study, the objective that this project must develop, is an electronic control of load which presents to a small hydro generator, a relatively constant and independent electric load that the demanded consumption for the user varies from none to full load, given as initial parameters a constant flow in the turbine and a control in the line tension. This way it seeks to improve the energy quality given by isolated generators

  17. Dimensional control and check of field machining parts for reactor internals installation

    International Nuclear Information System (INIS)

    Zhang Caifang

    2010-01-01

    Some key issues of dimensional control for reactor internals installation are analyzed, and important technical requirements of crucial quality control elements on the measurement, machining, and checking of reactor internals filed machining parts are discussed. Moreover, provisions on quality control and risk prevention of reactor internals filed machining parts are presented in this paper. (author)

  18. Lean Production Control at a High-Variety, Low-Volume Parts Manufacturer

    NARCIS (Netherlands)

    Bokhorst, Jos A. C.; Slomp, Jannes

    2010-01-01

    Eaton Electric General Supplies, a parts manufacturing unit that supplies parts for Eaton's electrical business unit, implemented several lean control elements in its high-variety, low-volume production units. These control elements include a constant work-in-process mechanism to limit and control

  19. Dividing traffic cluster into parts by signal control

    Science.gov (United States)

    Nagatani, Takashi

    2018-02-01

    When a cluster of vehicles with various speeds moves through the series of signals, the cluster breaks down by stopping at signals and results in smaller groups of vehicles. We present the nonlinear-map model of the motion of vehicles controlled by the signals. We study the breakup of a cluster of vehicles through the series of signals. The cluster of vehicles is divided into various groups by controlling the cycle time of signals. The vehicles within each group move with the same mean velocity. The breakup of the traffic cluster depends highly on the signal control. The dependence of dividing on both cycle time and vehicular speed is clarified. Also, we investigate the effect of the irregular interval between signals on dividing.

  20. Electronic Control Of Small Hydro-Generators Part 1

    International Nuclear Information System (INIS)

    Perez G, Alvaro; Romero A, Carlos E.

    1993-01-01

    This work is the beginning of several applied itineraries, to the government of micro-centrals, mainly directed to the control of electric variables of the generator with the desire of obtaining a system of electric generation to drop it climbs, economic, reliable and with great sense of use of the hydraulic resources guided to poor communities, isolated of the system of national interconnection. In all hydroelectric power station without caring their capacity is fundamental to govern the speed of the system turbine generator, to guarantee a constant frequency of 60 Hz, the stability of this parameter is a measure of the quality of the energy given to the user. The used regulation method is the mechanical governor, its action it is to control the flow of water that it enters to the turbine. For small generation power stations (smaller to 200 Kw), the mechanical governor's cost is comparable to the total cost of the plant, then it is economic to use an electronic load control. The project develops the load control whose function is to add external electric load to the generator to maintain the constant nominal active power and similar to the power nominal mechanics surrendered by the turbine. The microprocessor 8088 dedicated to the control of the system by the complexity of the process, the quantity of variables and the precision in the answer of the system is used. To carry out the investigation project a simulation program it was designed in computer that allows to know the answer of the load control ahead of time for different conditions of the user's operation. These results were answered with the obtained experimental values of the final tests of the team, throwing very near values to those calculated

  1. Compressor noise control begins with design--Part 1

    International Nuclear Information System (INIS)

    Frank, L.

    1993-01-01

    This paper describes the typical methods used by oil and gas pipeline companies to reduce the noise level associated with their pump and compressor stations. The common method is for the design engineer to specify an acceptable noise level at a specified distance. Unfortunately, the results by this method are rarely acceptable because vendors have not considered the effects of sound propagation outside the station, the owners have not considered the cumulative effect of various machinery, and there is little methodology available to distinguish the individual components which might be contributing the acoustically unacceptable noise levels in a multi-component system. This article stresses balanced noise control designs using noise control engineering

  2. Control of cattle trypanosomiasis in coastal savannah of Ghana Part ...

    African Journals Online (AJOL)

    Field studies on the control of animal trypanosomiasis were undertaken in the Coastal Savanna of Ghana to det-ermine the importance of the disease in livestock production. The methodologies adopted were participatory ru-ral appraisal, geographical information systems, and entomological or parasitological evaluation.

  3. Fpga As A Part Of Ms Windows Control Environment

    Directory of Open Access Journals (Sweden)

    Krzysztof Kołek

    2007-01-01

    Full Text Available The attention is focused on the Windows operating system (OS used as a control and measurementenvironment. Windows OS due to extensions becomes a real-time OS (RTOS.Benefits and drawbacks of typical software extensions are compared. As far as hardwaresolutions are concerned the field programmable gate arrays FPGA technology is proposed toensure fast time-critical operations. FPGA-based parallel execution and hardware implementationof the data processing algorithms significantly outperform the classical microprocessoroperating modes. Suitability of the RTOS for a particular application and FPGA hardwaremaintenance is studied.

  4. Compressor noise control begins with design--Part 2

    International Nuclear Information System (INIS)

    Frank, L.

    1993-01-01

    Reduction of noise pollution at gas compressor stations associated with natural gas pipelines and distribution systems, has long been a complex problem. Specified noise levels of individual components tell nothing of the overall system when it is installed and placed in a site-specific setting. Further, testing for compliance performance guarantees is virtually impossible to conduct at a distant location because one cannot distinguish among various contributing noise sources. This paper develops a plan for calculating an estimate of sound generation from a compressor station and the methods for controlling and measuring sounds of individual components. It also classifies the types of noise and gives various methods of dealing with each noise type

  5. Control of uncertain systems by feedback linearization with neural networks augmentation. Part II. Controller validation by numerical simulation

    Directory of Open Access Journals (Sweden)

    Adrian TOADER

    2010-09-01

    Full Text Available The paper was conceived in two parts. Part I, previously published in this journal, highlighted the main steps of adaptive output feedback control for non-affine uncertain systems, having a known relative degree. The main paradigm of this approach was the feedback linearization (dynamic inversion with neural network augmentation. Meanwhile, based on new contributions of the authors, a new paradigm, that of robust servomechanism problem solution, has been added to the controller architecture. The current Part II of the paper presents the validation of the controller hereby obtained by using the longitudinal channel of a hovering VTOL-type aircraft as mathematical model.

  6. 32 CFR Appendix B to Part 327 - Internal Management Control Review Checklist

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 2 2010-07-01 2010-07-01 false Internal Management Control Review Checklist B... B to Part 327—Internal Management Control Review Checklist (a) Task: Personnel and/or Organization... See footnote 2 to this Appendix B. (1) I attest that the above listed internal controls provide...

  7. 32 CFR Appendix G to Part 505 - Management Control Evaluation Checklist

    Science.gov (United States)

    2010-07-01

    ... CIVIL AUTHORITIES AND PUBLIC RELATIONS ARMY PRIVACY ACT PROGRAM Pt. 505, App. G Appendix G to Part 505—Management Control Evaluation Checklist (a) Function. The function covered by this checklist is DA Privacy...

  8. Design of analog networks in the control theory formulation. Part 2: Numerical results

    OpenAIRE

    Zemliak, A. M.

    2005-01-01

    The paper presents numerical results of design of nonlinear electronic networks based on the problem formulation in terms of the control theory. Several examples illustrate the prospects of the approach suggested in the first part of the work.

  9. Integrating CHWs as part of the team leading diabetes group visits: A randomized controlled feasibility study

    Science.gov (United States)

    The purpose of the study was to evaluate the feasibility of integrating Community Health Workers (CHWs) as part of the team leading diabetes group visits. This was a randomized controlled study that integrated CHWs as part of the team leading diabetes group visits for low-income Hispanic adults (n=5...

  10. 14 CFR Appendix I to Part 25 - Installation of an Automatic Takeoff Thrust Control System (ATTCS)

    Science.gov (United States)

    2010-01-01

    ... Appendix I to Part 25—Installation of an Automatic Takeoff Thrust Control System (ATTCS) I25.1General. (a... crew to increase thrust or power. I25.2Definitions. (a) Automatic Takeoff Thrust Control System (ATTCS... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Installation of an Automatic Takeoff Thrust...

  11. 41 CFR 61-250.99 - What is the OMB control number for this part?

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 1 2010-07-01 2010-07-01 true What is the OMB control... TRAINING SERVICE, DEPARTMENT OF LABOR 250-ANNUAL REPORT FROM FEDERAL CONTRACTORS § 61-250.99 What is the OMB control number for this part? Pursuant to the Paperwork Reduction Act, 44 U.S.C. 3501 et seq., and...

  12. 41 CFR 61-300.99 - What is the OMB control number for this part?

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 1 2010-07-01 2010-07-01 true What is the OMB control... TRAINING SERVICE, DEPARTMENT OF LABOR 300-ANNUAL REPORT FROM FEDERAL CONTRACTORS § 61-300.99 What is the OMB control number for this part? Pursuant to the Paperwork Reduction Act, 44 U.S.C. 3501 et seq., and...

  13. Controlled Nonlinear Stochastic Delay Equations: Part II: Approximations and Pipe-Flow Representations

    International Nuclear Information System (INIS)

    Kushner, Harold J.

    2012-01-01

    This is the second part of a work dealing with key issues that have not been addressed in the modeling and numerical optimization of nonlinear stochastic delay systems. We consider new classes of models, such as those with nonlinear functions of several controls (such as products), each with is own delay, controlled random Poisson measure driving terms, admissions control with delayed retrials, and others. Part I was concerned with issues concerning the class of admissible controls and their approximations, since the classical definitions are inadequate for our models. This part is concerned with transportation equation representations and their approximations. Such representations of nonlinear stochastic delay models have been crucial in the development of numerical algorithms with much reduced memory and computational requirements. The representations for the new models are not obvious and are developed. They also provide a template for the adaptation of the Markov chain approximation numerical methods.

  14. Model Predictive Control of the Exit Part Temperature for an Austenitization Furnace

    Directory of Open Access Journals (Sweden)

    Hari S. Ganesh

    2016-12-01

    Full Text Available Quench hardening is the process of strengthening and hardening ferrous metals and alloys by heating the material to a specific temperature to form austenite (austenitization, followed by rapid cooling (quenching in water, brine or oil to introduce a hardened phase called martensite. The material is then often tempered to increase toughness, as it may decrease from the quench hardening process. The austenitization process is highly energy-intensive and many of the industrial austenitization furnaces were built and equipped prior to the advent of advanced control strategies and thus use large, sub-optimal amounts of energy. The model computes the energy usage of the furnace and the part temperature profile as a function of time and position within the furnace under temperature feedback control. In this paper, the aforementioned model is used to simulate the furnace for a batch of forty parts under heuristic temperature set points suggested by the operators of the plant. A model predictive control (MPC system is then developed and deployed to control the the part temperature at the furnace exit thereby preventing the parts from overheating. An energy efficiency gain of 5.3 % was obtained under model predictive control compared to operation under heuristic temperature set points tracked by a regulatory control layer.

  15. Using magnetic levitation for non-destructive quality control of plastic parts.

    Science.gov (United States)

    Hennek, Jonathan W; Nemiroski, Alex; Subramaniam, Anand Bala; Bwambok, David K; Yang, Dian; Harburg, Daniel V; Tricard, Simon; Ellerbee, Audrey K; Whitesides, George M

    2015-03-04

    Magnetic levitation (MagLev) enables rapid and non-destructive quality control of plastic parts. The feasibility of MagLev as a method to: i) rapidly assess injection-molded plastic parts for defects during process optimization, ii) monitor the degradation of plastics after exposure to harsh environmental conditions, and iii) detect counterfeit polymers by density is demonstrated. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Real Time Part Input Control of a Pull Production System by Finding IF-THEN Rules

    Science.gov (United States)

    Ramli, Rizauddin; Yamamoto, Hidehiko; Abu Qudeiri, Jaber

    This paper considers the part input problem of a production system where two Flexible Transfer Lines (FTLs) consisting of an up-stream production line and a down-stream production line while operating under Just In Time (JIT) production management. The up-stream production line processes the raw material after receiving them from suppliers, and after processing them, delivers the processed product to a down-stream production line via a conveyer. In this paper, we have proposed a novel idea for a part input real time control system, known as Algorithm for Real Time Control of Part Input Systems (ARTCOPS). The algorithm is useful when FTLs are in operation under a production order that is different from the pre-decided production schedule. Simulations of virtual production systems have been carried out to verify that ARTCOPS is useful in real time control, although the production orders are different from the pre-decided production scheduling.

  17. Space and Missile Systems Center Standard: Parts, Materials, and Processes Control Program for Space Vehicles

    Science.gov (United States)

    2013-04-12

    preparation , implementation, and operation of a Parts, Materials, and Processes (PMP) control program for use during the design, development...Processes List CDR Critical Design Review CDRL Contract Data Requirements List CMOS Complementary Metal Oxide Semiconductor CONOPS Concept of Operations...Failure Review Board GFE Government Furnished Equipment GIDEP Government Industry Data Exchange Program HBT Heterojunction Bipolar Transistor IPT

  18. Document control system as an integral part of RA documentation database application

    International Nuclear Information System (INIS)

    Steljic, M.M; Ljubenov, V.Lj. . E-mail address of corresponding author: milijanas@vin.bg.ac.yu; Steljic, M.M.)

    2005-01-01

    The decision about the final shutdown of the RA research reactor in Vinca Institute has been brought in 2002, and therefore the preparations for its decommissioning have begun. All activities are supervised by the International Atomic Energy Agency (IAEA), which also provides technical and experts' support. This paper describes the document control system is an integral part of the existing RA documentation database. (author)

  19. Production and quality control of concrete for the Rajasthan Atomic Power Station - [Part 2

    International Nuclear Information System (INIS)

    Singh Roy, P.K.; Sukhtankar, K.D.; Prasad, K.

    1975-01-01

    The following aspects of the production and quality control of concrete and concrete materials used in the construction of twin-reactor Rajasthan Atomic Power Station are discussed : (1) relationship between strength of cubes and cylinders made of concrete used for the prestressed dome (2) temperature control during pouring of concrete (3) thermal conductivity of heavy concrete (4) various types of grouting procedures used for different structures forming part of reactors (5) quality control of normal and heavy concrete and (6) leakage through form ties. Typical concrete mixes used for grouts are also given. (M.G.B.)

  20. Preliminary study of S-CO{sub 2} cycle control logic for part load operation

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, Yoonhan; Lee, Jeong Ik [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

    2016-05-15

    The benefits of S-CO{sub 2} cycle are relatively high efficiency under the mild turbine inlet temperature region, simple layout configuration and small foot-print. In addition, the safety of the SFR system can be inherently enhanced as the violent sodium-water reaction can be substituted with the mild sodium-CO{sub 2} reaction. 75MWe S-CO{sub 2} recompression cycle with radial type turbomachineries and PCHE was designed. Under various part load conditions (30-100% thermal load), off-design performance of the designed system was assessed, and different control logics were first tested. It was identified that the inventory control strategy is the most efficient logic for the part load operation. In the system operation, the compressor surge condition is seriously considered and controlled to avoid the system damage.

  1. Information system design of inventory control spare parts maintenance (valuation class 5000) (case study: plant kw)

    Science.gov (United States)

    Fitriana, Rina; Moengin, Parwadi; Riana, Mega

    2016-02-01

    Plat KW hadn't using optimal inventory level planning yet and hadn't have an information system that well computerized. The research objective is to be able to design an information system related inventory control of spare parts maintenance. The study focused on five types of spare parts with the highest application rate during February 2013- March 2015 and included in the classification of fast on FSN analysis Grinding stones Cut 4". Cable Tie 15". Welding RB 26-32MM. Ring Plat ½" and Ring Plate 5/8 ". Inventory calculation used Economic Order Quantity (EOQ). Safety Stock (SS) and Reorder Point (ROP) methods. System analysis conducted using the framework PIECES with the proposed inventory control system. the performance of the plant KW relating to the supply of spare parts maintenance needs can be more efficient as well as problems at the company can be answered and can perform inventory cost savings amounting Rp.267.066. A computerized information system of inventory control spare parts maintenance provides a menu that can be accessed by each departments as the user needed.

  2. Optimality with feedback control in relativistic dynamics of a mass point. Part 1

    International Nuclear Information System (INIS)

    Blaquiere, A.; Pauchard, M.; Tahri-Yousfi, N.; Wickers, D.

    1984-01-01

    This article is an account of part of a research task currently in progress; it deals with relativistic dynamics of a mass-point from the point of view of the theory of optimal feedback control. In the first part, the theoretical frame is presented with an application to the case of special Relativity. This application shows that the way followed in this article is a natural one for approaching Wave mechanics, and that it closely parallels the way along which Louis de Broglie introduced Wave mechanics [fr

  3. Integrating CHWs as Part of the Team Leading Diabetes Group Visits: A Randomized Controlled Feasibility Study.

    Science.gov (United States)

    Vaughan, Elizabeth M; Johnston, Craig A; Cardenas, Victor J; Moreno, Jennette P; Foreyt, John P

    2017-12-01

    Purpose The purpose of the study was to evaluate the feasibility of integrating Community Health Workers (CHWs) as part of the team leading diabetes group visits. Methods This was a randomized controlled study that integrated CHWs as part of the team leading diabetes group visits for low-income Hispanic adults (n = 50). Group visits met for 3 hours each month for a 6-month duration. Main measures included baseline and 6-month clinical outcomes (ie, A1C, lipids), concordance with 8 standard of care guidelines (ie, screens for cervical, breast, and colon cancer) from the US Preventive Task Force and American Diabetes Association, and participant acceptability. Results Compared to control participants, the intervention group resulted in significantly better clinical outcomes or guideline concordance for the following areas: target A1C levels, retinal eye exams, diabetes foot exams, mammograms, and urine microalbumin. Significantly more individuals in the control group gained weight, whereas a greater number of participants in the intervention group lost weight. Intervention participants found the group visits highly acceptable. Conclusions Integrating CHWs as part a comprehensive diabetes group visit program is a feasible and effective system-level intervention to improve glycemic control and achieve guideline concordance.

  4. Influence of control algorithms parameters on an electromechanical converter with a secondary discrete part

    Directory of Open Access Journals (Sweden)

    Kuimov Denis

    2017-01-01

    Full Text Available An alternative configuration of a device with a secondary discrete part using a magnetic system of a similar multi-phase inductor machine and concentrated windings without an internal rotor is proposed. An algorithm of sensorless control of a motion process of a secondary discrete part is proposed. The analysis of the distribution nature of the magnetic field for various switching algorithms is carried out to reduce negative influence of the “dead” zones of the first and second order. The features of the movement process of the secondary discrete part in the working chamber of the device are considered. The results of in the electromagnetic force change affecting a ferromagnetic working element are presented, and recommendations for the application of switching algorithms are given.

  5. Dimensional metrology for process and part quality control in micro manufacturing

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard; Tosello, Guido; Gasparin, Stefania

    2011-01-01

    dimensions are scaled down and geometrical complexity of objects is increased, the available measurement technologies appear not sufficient. New solutions for measuring principles and instrumentation, tolerancing rules and procedures as well as traceability and calibration are necessary if micro......Micro manufacturing has gained interest over the last decade as the demand for micro mechanical components has increased. The need for dimensional metrology at micro scale is evident both in terms of quality assurance of components and products and in terms of process control. As critical...... manufacturing is to develop into industrial manufacturing solutions. In this paper the application of dimensional precision metrology to both component and process quality control will be demonstrated. The parts investigated are micro injection moulded polymer parts, typical for the field of micro manufacturing....

  6. Quality control and process capability assessment for injection-moulded micro mechanical parts

    DEFF Research Database (Denmark)

    Gasparin, Stefania; Tosello, Guido; Hansen, Hans Nørgaard

    2013-01-01

    Quality control of micro components is an increasing challenge. Smaller mechanical parts are characterized by smaller tolerance to be verified. This paper focuses on the dimensional verification of micro injection-moulded components selected from an industrial application. These parts are measured...... using an optical coordinate measuring machine, which guarantees fast surface scans suitable for inline quality control. The uncertainty assessment of the measurements is calculated and three analyses are carried out and discussed in order to investigate the influence parameters in optical coordinate...... metrology. The estimation of the total variability of the optical measurements and the instrument repeatability are reported; moreover, the measurement system capability is evaluated according to the measurement system capability indices Cg and Cgk....

  7. Tunable, Flexible and Efficient Optimization of Control Pulses for Superconducting Qubits, part II - Applications

    Science.gov (United States)

    AsséMat, Elie; Machnes, Shai; Tannor, David; Wilhelm-Mauch, Frank

    In part I, we presented the theoretic foundations of the GOAT algorithm for the optimal control of quantum systems. Here in part II, we focus on several applications of GOAT to superconducting qubits architecture. First, we consider a control-Z gate on Xmons qubits with an Erf parametrization of the optimal pulse. We show that a fast and accurate gate can be obtained with only 16 parameters, as compared to hundreds of parameters required in other algorithms. We present numerical evidences that such parametrization should allow an efficient in-situ calibration of the pulse. Next, we consider the flux-tunable coupler by IBM. We show optimization can be carried out in a more realistic model of the system than was employed in the original study, which is expected to further simplify the calibration process. Moreover, GOAT reduced the complexity of the optimal pulse to only 6 Fourier components, composed with analytic wrappers.

  8. A HACCP-based approach to mastitis control in dairy herds. Part 2: Implementation and evaluation

    Science.gov (United States)

    2011-01-01

    Part 1 of the study described the development of a Hazard Analysis and Critical Control Point (HACCP) based programme and accompanying handbook for the control of mastitis. This paper describes the implementation and evaluation of customised HACCP-based programmes, which were developed from the handbook and assessed on six Irish dairy farms. Both quantitative and qualitative (action research) research methodologies were used to measure the success of implementation and efficacy of control of sub-clinical mastitis as measured by Somatic Cell Counts (SCC) and the degree of compliance by farmers in adopting and maintaining recommendations throughout the course of the study period. No overall differences in SCC before and during the implementation of the study were found when all six farms were considered together. Three of the six study farms experienced a significant decrease in herd milk recorded SCC during the implementation of the control programme. An essential part of the study was achieving initial agreement on recommendations as well as ongoing monitoring of compliance during the study. This pilot study shows that HACCP can be implemented on farms as a means of working towards the control of mastitis and that farmer attitude, and understanding of mastitis are crucial in terms of motivation irrespective of practical approaches used to manage mastitis. PMID:21777494

  9. Export Control Guide: Loose Parts Monitoring Systems for Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Langenberg, Donald W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2012-12-01

    This report describes a typical LPMS, emphasizing its application to the RCS of a modern NPP. The report also examines the versatility of AE monitoring technology by describing several nuclear applications other than loose parts monitoring, as well as some non-nuclear applications. In addition, LPMS implementation requirements are outlined, and LPMS suppliers are identified. Finally, U.S. export controls applicable to LPMSs are discussed.

  10. Tobacco control and gender in Southeast Asia. Part I: Malaysia and the Philippines.

    Science.gov (United States)

    Morrow, Martha; Barraclough, Simon

    2003-09-01

    In the World Health Organization's Western Pacific Region, being born male is the single greatest risk marker for tobacco use. While the literature demonstrates that risks associated with tobacco use may vary according to sex, gender refers to the socially determined roles and responsibilities of men and women, who initiate, continue and quit using tobacco for complex and often different reasons. Cigarette advertising frequently appeals to gender roles. Yet tobacco control policy tends to be gender-blind. Using a broad gender-sensitivity framework, this contradiction is explored in four Western Pacific countries. Part I of the study discusses issues surrounding gender and tobacco, and analyses developments in Malaysia and the Philippines. Part II deals with Singapore and Vietnam. In all four countries, gender was salient for the initiation and maintenance of smoking, and in Malaysia and the Philippines was highly significant in cigarette promotion. Yet, with a few exceptions, gender was largely unrecognized in control policy. Suggestions for overcoming this weakness in order to enhance tobacco control are made in Part II.

  11. Haptic control of a pneumatic muscle actuator to provide resistance for simulated isokinetic exercise; part II: control development and testing.

    Science.gov (United States)

    Hall, Kara L; Phillips, Chandler A; Reynolds, David B; Mohler, Stanley R; Rogers, Dana B; Neidhard-Doll, Amy T

    2015-01-01

    Pneumatic muscle actuators (PMAs) have a high power to weight ratio and possess unique characteristics which make them ideal actuators for applications involving human interaction. PMAs are difficult to control due to nonlinear dynamics, presenting challenges in system implementation. Despite these challenges, PMAs have great potential as a source of resistance for strength training and rehabilitation. The objective of this work was to control a PMA for use in isokinetic exercise, potentially benefiting anyone in need of optimal strength training through a joint's range of motion. The controller, based on an inverse three-element phenomenological model and adaptive nonlinear control, allows the system to operate as a type of haptic device. A human quadriceps dynamic simulator was developed (as described in Part I of this work) so that control effectiveness and accommodation could be tested prior to human implementation. Tracking error results indicate that the control system is effective at producing PMA displacement and resistance necessary for a scaled, simulated neuromuscular actuator to maintain low-velocity isokinetic movement during simulated concentric and eccentric knee extension.

  12. Use of statistic control of the process as part of a quality assurance plan

    International Nuclear Information System (INIS)

    Acosta, S.; Lewis, C.

    2013-01-01

    One of the technical requirements of the standard IRAM ISO 17025 for the accreditation of testing laboratories, is the assurance of the quality of the results through the control and monitoring of the factors influencing the reliability of them. The grade the factors contribute to the total measurement uncertainty, determines which of them should be considered when developing a quality assurance plan. The laboratory of environmental measurements of strontium-90 in the accreditation process, performs most of its determinations in samples with values close to the detection limit. For this reason the correct characterization of the white, is a critical parameter and is verified through a letter for statistical process control. The scope of the present work is concerned the control of whites and so it was collected a statistically significant amount of data, for a period of time that is covered of different conditions. This allowed consider significant variables in the process, such as temperature and humidity, and build a graph of white control, which forms the basis of a statistical process control. The data obtained were lower and upper limits for the preparation of the charter white control. In this way the process of characterization of white was considered to operate under statistical control and concludes that it can be used as part of a plan of insurance of the quality

  13. Tutorial on Feedback Control of Flows, Part I: Stabilization of Fluid Flows in Channels and Pipes

    Directory of Open Access Journals (Sweden)

    Ole M. Aamo

    2002-07-01

    Full Text Available The field of flow control has picked up pace over the past decade or so, on the promise of real-time distributed control on turbulent scales being realizable in the near future. This promise is due to the micromachining technology that emerged in the 1980s and developed at an amazing speed through the 1990s. In lab experiments, so called micro-electro-mechanical systems (MEMS that incorporate the entire detection-decision-actuation process on a single chip, have been batch processed in large numbers and assembled into flexible skins for gluing onto body-fluid interfaces for drag reduction purposes. Control of fluid flows span a wide variety of specialities. In Part I of this tutorial, we focus on the problem of reducing drag in channel and pipe flows by stabilizing the parabolic equilibrium profile using boundary feedback control. The control strategics used for this problem include classical control, based on the Nyquist criteria, and various optimal control techniques (H2, H-Infinity, as well as applications of Lyapunov stability theory.

  14. Instrumentation and control aging management: A focus on electronic parts and boards

    International Nuclear Information System (INIS)

    Crocombette, C.; Simon, G.; Favaro, P.; Naser, J.; Guffroy, G.

    2002-01-01

    Full text: The nuclear power industry is currently facing increasing aging and obsolescence issues with original equipment installed for instrumentation, control, and safety system applications. One area that needs attention is the aging of electronic boards and components used in instrumentation and control (I and C) systems in nuclear power plants (NPPs). In this context, EPRI has launched a project dedicated to NPP electronic component and board aging management. The goals of this project are: 1) to better understand the degradation mechanisms of I and C electronic systems; 2) to develop new methods to monitor prevalent mechanisms and forecast generic aging cases; and 3) to give guidelines for the aging management of I and C electronic systems. The ultimate objectives are: 1) to reduce the likelihood of losing plant availability due to a board or component failure; and 2) to reduce the global cost of maintenance by optimizing preventive maintenance tasks and the schedule for refurbishment or renewal. Degradation mechanisms of electronic boards in NPP - Aging mechanisms of electronic parts depend on technologies, manufacturing quality, and conditions of environment and operation. Aging of electronic parts is well documented in harsh environments (e.g., aerospace, military, or automotive industries data). However, only a small amount of data on electronic part failures in NPPs is available because the conditions are benign and the failure rates are supposed to be low. It is thus difficult to identify what will predominantly cause the aging of electronic systems after 20 or 30 years of operation. Usual causes are temperature, corrosion, temperature cycles, or extrinsic aggressions (Electrical Over Stress (EOS), Electro Static Discharges (ESD)). From field data and bibliographic analyses, we found that electrolytic capacitors, relays, potentiometers, power devices (thyristors, power transistors, etc.), optocouplers, on-board connectors, printed boards, integrated

  15. Part load performance of air-cooled centrifugal chillers with variable speed condenser fan control

    Energy Technology Data Exchange (ETDEWEB)

    Yu, F.W.; Chan, K.T. [Department of Building Services Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong (China)

    2007-11-15

    Air-cooled centrifugal chillers are commonly used in commercial buildings but their performance analysis is lacking. This paper investigates the part load performance of the chillers via a thermodynamic model. The model was validated using a wide range of operating data from an existing chiller with specific settings of outdoor temperature and condensing pressure in controlling the condensing temperature. The validated model was developed specifically to ascertain the maximum coefficient of performance of chiller (COP) together with the strategy for optimizing the condensing temperature under various operating conditions. It is found that the highest COP occurs at a part load ratio (PLR) of 0.71-0.84, depending on the outdoor temperature and the control of condensing temperature, rather than at full load. Yet the chillers operating at such part load conditions will cause extra energy used for the early staging of chilled water pumps. To minimize the overall chiller plant energy consumption, it is still preferable to implement chiller sequencing based on the full load condition than on the aforementioned PLRs. The results of this paper present criteria for implementing low-energy strategies for operating air-cooled chillers satisfying a given building cooling load profile. (author)

  16. A HACCP-based approach to mastitis control in dairy herds. Part 1: Development

    Directory of Open Access Journals (Sweden)

    Beekhuis-Gibbon Lies

    2011-03-01

    Full Text Available Abstract Hazard Analysis and Critical Control Points (HACCP systems are a risk based preventive approach developed to increase levels of food safety assurance. This is part 1 of a pilot study on the development, implementation and evaluation of a HACCP-based approach for the control of good udder health in dairy cows. The paper describes the use of a novel approach based on a deconstruction of the infectious process in mastitis to identify Critical Control Points (CCPs and develop a HACCP-based system to prevent and control mastitis in dairy herds. The approach involved the creation of an Infectious Process Flow Diagram, which was then cross-referenced to two production process flow diagrams of the milking process and cow management cycle. The HACCP plan developed, may be suitable for customisation and implementation on dairy farms. This is a logical, systematic approach to the development of a mastitis control programme that could be used as a template for the development of control programmes for other infectious diseases in the dairy herd.

  17. A HACCP-based approach to mastitis control in dairy herds. Part 1: Development.

    Science.gov (United States)

    Beekhuis-Gibbon, Lies; Whyte, Paul; O'Grady, Luke; More, Simon J; Doherty, Michael L

    2011-03-31

    Hazard Analysis and Critical Control Points (HACCP) systems are a risk based preventive approach developed to increase levels of food safety assurance. This is part 1 of a pilot study on the development, implementation and evaluation of a HACCP-based approach for the control of good udder health in dairy cows. The paper describes the use of a novel approach based on a deconstruction of the infectious process in mastitis to identify Critical Control Points (CCPs) and develop a HACCP-based system to prevent and control mastitis in dairy herds. The approach involved the creation of an Infectious Process Flow Diagram, which was then cross-referenced to two production process flow diagrams of the milking process and cow management cycle. The HACCP plan developed, may be suitable for customisation and implementation on dairy farms. This is a logical, systematic approach to the development of a mastitis control programme that could be used as a template for the development of control programmes for other infectious diseases in the dairy herd.

  18. Simulations and Experiments on Vibration Control of Aerospace Thin-Walled Parts via Preload

    Directory of Open Access Journals (Sweden)

    Qiong Wu

    2017-01-01

    Full Text Available Thin-walled parts primarily comprise the entire piece of rough machining, and the material removal rate can surpass 95%. Numerous components with thin-walled structures are preferred in the aerospace industry for their light weight, high strength, and other advantages. In aerospace thin-walled workpiece machining processes and practical applications, they are excited by the vibration. The preload changing the modal stiffness of the part is found and this change causes continuous changes in the natural frequency. Researching on the influence of pretightening force on dynamic characteristics of thin-walled components is highly significant for controlling vibration. In this study, the typical aviation thin-walled part is the research object. Finite element numerical simulation and experimental verification are employed to analyze the dynamic characteristics of 7075 aluminum alloy thin-walled plates under different preloads for exploring the relationship between natural frequency and preload. The relationship is validated by comparative results. Both the simulation and experimental results show that the natural frequencies of plates increase following the augmentation of the preload. Thus, this research introduces the method where vibration of aerospace thin-walled parts is reduced by preload. For practical engineering application, a program showing the relationship between natural frequency and preload is written using Visual Basic language.

  19. A Mathematical Formulation of the SCOLE Control Problem. Part 2: Optimal Compensator Design

    Science.gov (United States)

    Balakrishnan, A. V.

    1988-01-01

    The study initiated in Part 1 of this report is concluded and optimal feedback control (compensator) design for stability augmentation is considered, following the mathematical formulation developed in Part 1. Co-located (rate) sensors and (force and moment) actuators are assumed, and allowing for both sensor and actuator noise, stabilization is formulated as a stochastic regulator problem. Specializing the general theory developed by the author, a complete, closed form solution (believed to be new with this report) is obtained, taking advantage of the fact that the inherent structural damping is light. In particular, it is possible to solve in closed form the associated infinite-dimensional steady-state Riccati equations. The SCOLE model involves associated partial differential equations in a single space variable, but the compensator design theory developed is far more general since it is given in the abstract wave equation formulation. The results thus hold for any multibody system so long as the basic model is linear.

  20. Tobacco control and gender in south-east Asia. Part II: Singapore and Vietnam.

    Science.gov (United States)

    Morrow, Martha; Barraclough, Simon

    2003-12-01

    In the World Health Organization's Western Pacific Region, being born male is the single greatest risk marker for tobacco use. While the literature demonstrates that risks associated with tobacco use may vary according to sex, gender refers to the socially determined roles and responsibilities of men and women, who initiate, continue and quit using tobacco for complex and often different reasons. Cigarette advertising frequently appeals to gender roles. Yet tobacco control policy tends to be gender-blind. Using a broad, gender-sensitivity framework, this contradiction is explored in four Western Pacific countries. Part I of the study presented the rationale, methodology and design of the study, discussed issues surrounding gender and tobacco, and analysed developments in Malaysia and the Philippines (see the previous issue of this journal). Part II deals with Singapore and Vietnam. In all four countries gender was salient for the initiation and maintenance of smoking. Yet, with a few exceptions, gender was largely unrecognized in control policy. Suggestions for overcoming this weakness in order to enhance tobacco control are made.

  1. Matters of Cost: Part I. Jones Learns about Balance Sheets: Part II. A Look at Budgetary Control: Part III. The Supervisor's "Do-It-Yourself" Series 3.

    Science.gov (United States)

    Smith, J. E.; And Others

    This guide, which is intended for new supervisors and managers to use in an independent study setting, deals with costing, balance sheets, and budgetary control. The first section, "Matters of Cost" by J. E. and J. F. Smith, deals with the following topics: profits and productivity, principles of costing, cost control and cost reduction, fixed and…

  2. 30 CFR 90.301 - Respirable dust control plan; approval by District Manager; copy to part 90 miner.

    Science.gov (United States)

    2010-07-01

    ... District Manager; copy to part 90 miner. 90.301 Section 90.301 Mineral Resources MINE SAFETY AND HEALTH... control plan; approval by District Manager; copy to part 90 miner. (a) The District Manager will approve... District Manager shall consider whether: (1) The respirable dust control measures would be likely to...

  3. El reduccionismo científico y el control de las conciencias. Parte II

    OpenAIRE

    Leonardo Viniegra Velázquez

    2014-01-01

    En esta segunda parte se analizan los vínculos de subordinación del quehacer científico con lo que se designa como la lógica del poder y la dominación, a través de dar prioridad absoluta a los hechos sobre las ideas y favorecer el conocimiento capitalizable por la innovación tecnológica, la cual es decisiva en la rentabilidad y competitividad de las grandes empresas (los intereses de lucro que gobiernan el planeta), y base de los mecanismos de control político-social de las conciencias y de l...

  4. Trends in Energy Management Technology - Part 3: State of Practiceof Energy Management, Control, and Information Systems

    Energy Technology Data Exchange (ETDEWEB)

    Yee, Gaymond; Webster, Tom

    2004-02-01

    In this report, the third in a series, we provide an evaluation of several products that exemplify the current state of practice of Energy Management, Control, and Information Systems (EMCIS). The available features for these products are summarized and analyzed with regard to emerging trends in EMCIS and potential benefits to the federal sector. The first report [1] covered enabling technologies for emerging energy management systems. The second report [2] serves as a basic reference for building control system (BCS) networking fundamentals and includes an assessment of current approaches to open communications. Part 4 of this series will discuss applications software from a user's perspective. It is important for energy managers in the Federal sector to have a high level of knowledge and understanding of these complex energy management systems. This series of reports provides energy practitioners with some basic informational and educational tools to help make decisions relative to energy management systems design, specification, procurement, and energy savings potential.

  5. Human Factors and Data Fusion as Part of Control Systems Resilience

    Energy Technology Data Exchange (ETDEWEB)

    David I. Gertman

    2009-05-01

    Human performance and human decision making is counted upon as a crucial aspect of overall system resilience. Advanced control systems have the potential to provide operators and asset owners a wide range of data, deployed at different levels that can be used to support operator situation awareness. However, the sheer amount of data available can make it challenging for operators to assimilate information and respond appropriately. This paper reviews some of the challenges and issues associated with providing operators with actionable state awareness and argues for the over arching importance of integrating human factors as part of intelligent control systems design and implementation. It is argued that system resilience is improved by implementing human factors in operations and maintenance. This paper also introduces issues associated with resilience and data fusion and highlights areas in which human factors including field studies hold promise.

  6. Fractional Programming for Communication Systems—Part I: Power Control and Beamforming

    Science.gov (United States)

    Shen, Kaiming; Yu, Wei

    2018-05-01

    This two-part paper explores the use of FP in the design and optimization of communication systems. Part I of this paper focuses on FP theory and on solving continuous problems. The main theoretical contribution is a novel quadratic transform technique for tackling the multiple-ratio concave-convex FP problem--in contrast to conventional FP techniques that mostly can only deal with the single-ratio or the max-min-ratio case. Multiple-ratio FP problems are important for the optimization of communication networks, because system-level design often involves multiple signal-to-interference-plus-noise ratio terms. This paper considers the applications of FP to solving continuous problems in communication system design, particularly for power control, beamforming, and energy efficiency maximization. These application cases illustrate that the proposed quadratic transform can greatly facilitate the optimization involving ratios by recasting the original nonconvex problem as a sequence of convex problems. This FP-based problem reformulation gives rise to an efficient iterative optimization algorithm with provable convergence to a stationary point. The paper further demonstrates close connections between the proposed FP approach and other well-known algorithms in the literature, such as the fixed-point iteration and the weighted minimum mean-square-error beamforming. The optimization of discrete problems is discussed in Part II of this paper.

  7. Transactive System: Part I: Theoretical Underpinnings of Payoff Functions, Control Decisions, Information Privacy, and Solution Concepts

    Energy Technology Data Exchange (ETDEWEB)

    Lian, Jianming [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhang, Wei [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sun, Y. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Marinovici, Laurentiu D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kalsi, Karanjit [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Widergren, Steven E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2018-01-17

    new transactive energy system design with demonstrable guarantees on stability and performance. Specifically, the goals are to (1) establish a theoretical basis for evaluating the performance of different transactive systems, (2) devise tools to address canonical problems that exemplify challenges and scenarios of transactive systems, and (3) provide guidelines for design of future transactive systems. This report, Part 1 of a two part series, advances the above-listed research objectives by reviewing existing transactive systems and identifying a theoretical foundation that integrates payoff functions, control decisions, information privacy, and mathematical solution concepts.

  8. Redox control of electric melters with complex feed compositions. Part I: analytical methods and models

    International Nuclear Information System (INIS)

    Bickford, D.F.; Diemer, R.B. Jr.

    1985-01-01

    The redox state of glass from electric melters with complex feed compositions is determined by balance between gases above the melt, and transition metals and organic compounds in the feed. Part I discusses experimental and computational methods of relating flowrates and other melter operating conditions to the redox state of glass, and composition of the melter offgas. Computerized thermodynamic computational methods are useful in predicting the sequence and products of redox reactions and in assessing individual process variations. Melter redox state can be predicted by combining monitoring of melter operating conditions, redox measurement of fused melter feed samples, and periodic redox measurement of product. Mossbauer spectroscopy, and other methods which measure Fe(II)/Fe(III) in glass, can be used to measure melter redox state. Part II develops preliminary operating limits for the vitrification of High-Level Radioactive Waste. Limits on reducing potential to preclude the accumulation of combustible gases, accumulation of sulfides and selenides, and degradation of melter components are the most critical. Problems associated with excessively oxidizing conditions, such as glass foaming and potential ruthenium volatility, are controlled when sufficient formic acid is added to adjust melter feed rheology

  9. Quality control for digital mammography: Part II recommendations from the ACRIN DMIST trial

    International Nuclear Information System (INIS)

    Yaffe, Martin J.; Bloomquist, Aili K.; Mawdsley, Gordon E.

    2006-01-01

    The Digital Mammography Imaging Screening Trial (DMIST), conducted under the auspices of the American College of Radiology Imaging Network (ACRIN), is a clinical trial designed to compare the accuracy of digital versus screen-film mammography in a screening population [E. Pisano et al., ACRIN 6652--Digital vs. Screen-Film Mammography, ACRIN (2001)]. Part I of this work described the Quality Control program developed to ensure consistency and optimal operation of the digital equipment. For many of the tests, there were no failures during the 24 months imaging was performed in DMIST. When systems failed, they generally did so suddenly rather than through gradual deterioration of performance. In this part, the utility and effectiveness of those tests are considered. This suggests that after verification of proper operation, routine extensive testing would be of minimal value. A recommended set of tests is presented including additional and improved tests, which we believe meet the intent and spirit of the Mammography Quality Standards Act regulations to ensure that full-field digital mammography systems are functioning correctly, and consistently producing mammograms of excellent image quality

  10. Proceedings of the 2004 NASA/ONR Circulation Control Workshop, Part 2

    Science.gov (United States)

    Jones, Gregory S. (Editor); Joslin, Ronald D. (Editor)

    2005-01-01

    This conference proceeding is comprised of papers that were presented at the NASA/ONR Circulation Control Workshop held 16-17 March 2004 at the Radisson-Hampton in Hampton, VA. Over two full days, 30 papers and 4 posters were presented with 110 scientists and engineers in attendance, representing 3 countries. As technological advances influence the efficiency and effectiveness of aerodynamic and hydrodynamic applications, designs, and operations, this workshop was intended to address the technologies, systems, challenges and successes specific to Coanda driven circulation control in aerodynamics and hydrodynamics. A major goal of this workshop was to determine the state-of-the-art in circulation control and to assess the future directions and applications for circulation control. The 2004 workshop addressed applications, experiments, computations, and theories related to circulation control, emphasizing fundamental physics, systems analysis, and applied research. The workshop consisted of single session oral presentations, posters, and written papers that are documented in this unclassified conference proceeding. The format of this written proceeding follows the agenda of the workshop. Each paper is followed with the presentation given at the workshop. the editors compiled brief summaries for each effort that is at the end of this proceeding. These summaries include the paper, oral presentation, and questions or comments that occurred during the workshop. The 2004 Circulation Control Workshop focused on applications including Naval vehicles (Surface and Underwater vehicles), Fixed Wing Aviation (general aviation, commercial, cargo, and business aircraft); V/STOL platforms (helicopters, military aircraft, tilt rotors); propulsion systems (propellers, jet engines, gas turbines), and ground vehicles (automotive, trucks, and other); wind turbines, and other nontraditional applications (e.g., vacuum cleaner, ceiling fan). As part of the CFD focus area of the 2004 CC

  11. A Study of Active Rotor-Blade Vibration Control using Electro-Magnetic Actuation - Part II: Experiment

    DEFF Research Database (Denmark)

    Christensen, Rene Hardam; Santos, Ilmar

    2004-01-01

    . The remaining two sets of actuators are applied to act directly onto the hub, working as an active radial bearing controlling the rotor lateral movement. The rig is equipped with sensors measuring blade and rotor vibrations. Actuators and sensors are connected to a digital signal processor running the control......This is the second paper in a two-part study on active rotor-blade vibration control. This part presents an experimental contribution into the work of active controller design for rotor-blade systems. The primary aim is to give an experimental validation and show the applicability...... algorithm. Measurement signals and actuator control signals from the sensors and actuators fixed in the rotating disc are transmitted to the control unit through a slip-ring device. Various measured responses of both the controlled and the non-controlled system with identical blades and with deliberately...

  12. Managing emergencies and abnormal situations in air traffic control (part II): teamwork strategies.

    Science.gov (United States)

    Malakis, Stathis; Kontogiannis, Tom; Kirwan, Barry

    2010-07-01

    Team performance has been studied in many safety-critical organizations including aviation, nuclear power plant, offshore oil platforms and health organizations. This study looks into teamwork strategies that air traffic controllers employ to manage emergencies and abnormal situations. Two field studies were carried out in the form of observations of simulator training in emergency and unusual scenarios of novices and experienced controllers. Teamwork strategies covered aspects of team orientation and coordination, information exchange, change management and error handling. Several performance metrics were used to rate the efficiency of teamwork and test the construct validity of a prototype model of teamwork. This is a companion study to an earlier investigation of taskwork strategies in the same field (part I) and contributes to the development of a generic model for Taskwork and Teamwork strategies in Emergencies in Air traffic Management (T(2)EAM). Suggestions are made on how to use T(2)EAM to develop training programs, assess team performance and improve mishap investigations. Copyright 2010 Elsevier Ltd. All rights reserved.

  13. Radiation protection at the RA Reactor in 1988, Part -2, Annex 2c, Environmental radioactivity control, meteorology measurements

    International Nuclear Information System (INIS)

    Grsic, Z.; Zaric, M.; Adamovic, M.; Stevanovic, M.

    1988-01-01

    During 1988, meteorology measurements were continued as a part of the environmental control of the Vinca Institute. This report covers the period from November 1984 - November 1985. Part of the meteorology measurements and data analysis is adapted to the needs of the Institute, i.e. RA reactor and some Laboratories. The objective of these activities is forming the data base for solving everyday and special problems related to control, protection and safety of Institute environment [sr

  14. 33 CFR Appendix C to Part 273 - Information Requirements for Aquatic Plant Control Program Environmental Impact Statements

    Science.gov (United States)

    2010-07-01

    ... Aquatic Plant Control Program Environmental Impact Statements C Appendix C to Part 273 Navigation and... Environmental Impact Statements 1. Description of the problem. a. Pests. Identify the pest to be controlled by.... Relationship to environmental situation. Non-target organisms and integrated pest management programs. 2...

  15. A ballistics module as a part of the fire control system

    Directory of Open Access Journals (Sweden)

    Branka R. Luković

    2013-10-01

    Full Text Available This article presents a ballistics module as a part of the fire control system of weapons for fire support (mortars, artillery weapons and rocket launchers. The software is "open" with the prominence of autonomy work. It can be modulated and adapted on the user demand. Moreover, it is independent of the hardware base. Introduction: The fire control system is based on a ballistic module (BM which determines the firing data for each weapon tool in the battery. Ballistic calculations, for the given position of the target in relation to the position of tools in the given weather conditions, determine firing data (elevation, direction, timing and locating devices so that the missile seems to cause the desired effect. This paper gives the basic information about the features the BM performs and the manner of their implementation in the fire control system without going into algorithmic solution procedures. Ballistic problem in the fire control system: Ballistic calculation is based on a trajectory calculation of all kinds of projectiles (current, time-fuze, illuminating, smoke, with conventional propulsion, rocket, with built-in gas generator, etc.. Instead of previous solutions, where a trajectory calculation of the fire control system was done by approximate methods, in this BM the trajectory calculation is made by the same model with the same data as for a weapon and ammunition in the process of creating a firing table. The data used in the fire control system are made simultaneously with the preparation of firing tables for a particular tool and associated ammunition,. A modified model of particle, standardized at the NATO level, is also used. Taking into account the meteorological situation, before the trajectory calculation is done, a relative position of the target in relation to the position of the tool should be determined. A selection or loading check is carried out (possibility of reaching a given target as well as the point at which the

  16. Statistical method for the control of the electric power service interruptions (second part); Metodo de control estadistico de las interrupciones del servicio electrico (2a. parte)

    Energy Technology Data Exchange (ETDEWEB)

    Issouribehere, Pedro E.; Barbero, Juan C. [Universidad Nacional de La Plata (UNLP), Buenos Aires (Argentina). Facultad de Ingenieria. Inst. de Investigaciones Tecnologicas para Redes y Equipos Electricos (IITREE-LAT)]. E-mail: iitree@.ing.unlp.edu.ar; Martinez, Jorge L.; Galinski, Alejandro [Ente Nacional Regulador de la Electricidad (ENRE), Buenos Aires (Argentina)

    2001-07-01

    This paper presents the register of interruptions in application points of the concession areas of three concessionaires. The reliability indexes are presented of the controlled sites: interruption ratio {lambda}, time of average reposition r and unavailability Q obtained with the field information recompiled during three years from June 2000. The paper also obtains by concessionaire, the ratios of brief interruptions occurrence which constitutes another indicator of the Electric Service Quality.

  17. A critical spare part inventory control based on hazard function approach: A case study in a garment company

    Science.gov (United States)

    Melinda, Intan Dewi; Jauhari, Wakhid Ahmad

    2018-02-01

    Spare part procurement is a complex issue and requires an accurate analysis. Stock outs of spare part can leads a great impact on production. Therefore, it is necessary to design the inventory control of spare parts that guarantee the availability of spare parts needed for supporting the maintenance activity. This paper studies the inventory policy for sewing machine spare part using hazard function to approximate the demand. Hazard function is the indicator of the effect of ageing on the reliability of the system. It quantifies the risk of failure as the age of the system increases. We use a continuous review policy based on Hadley Within Approach to calculate the optimum inventory level for critical spare parts. There are four spare parts categorized as critical spare parts, which are needle plate, feed dog, rotary and binder attachment. The optimal ordering quantity for needle plate, feed, rotary and binder attachment are 5 units, 17 units, 5 units, and 9 units, respectively and the reorder point are 2 units, 1 unit, 2 units and 1 unit, respectively. Finally, the service level achieved by the proposed policy is in a range of 95.91%-97.93%, which indicates that the inventory level of spare parts can be used to support the required parts in the maintenance activity.

  18. Active tilting-pad journal bearings supporting flexible rotors: Part II–The model-based feedback-controlled lubrication

    DEFF Research Database (Denmark)

    Salazar, Jorge Andrés González; Santos, Ilmar

    2017-01-01

    This is part II of a twofold paper series dealing with the design and implementation of model-based controllers meant for assisting the hybrid and developing the feedback-controlled lubrication regimes in active tilting pad journal bearings (active TPJBs). In both papers theoretical and experimen...... derived in part I. Results show further suppression of resonant vibrations when using the feedback-controlled or active lubrication, overweighting the reduction already achieved with hybrid lubrication, thus improving the whole machine dynamic performance.......This is part II of a twofold paper series dealing with the design and implementation of model-based controllers meant for assisting the hybrid and developing the feedback-controlled lubrication regimes in active tilting pad journal bearings (active TPJBs). In both papers theoretical...... and experimental analyses are presented with focus on the reduction of rotor lateral vibration. This part is devoted to synthesising model-based LQG optimal controllers (LQR regulator + Kalman Filter) for the feedback-controlled lubrication and is based upon the mathematical model of the rotor-bearing system...

  19. A survey on control schemes for distributed solar collector fields. Part I: Modeling and basic control approaches

    Energy Technology Data Exchange (ETDEWEB)

    Camacho, E.F.; Rubio, F.R. [Universidad de Sevilla, Escuela Superior de Ingenieros, Departamento de Ingenieria de Sistemas y Automatica, Camino de Los Descubrimientos s/n, E-41092, Sevilla (Spain); Berenguel, M. [Universidad de Almeria, Departamento de Lenguajes y Computacion, Area de Ingenieria de Sistemas y Automatica, Carretera Sacramento s/n, E-04120 La Canada, Almeria (Spain); Valenzuela, L. [Plataforma Solar de Almeria - CIEMAT, Carretera Senes s/n, P.O. Box 22, E-04200 Tabernas, Almeria (Spain)

    2007-10-15

    This article presents a survey of the different automatic control techniques that have been applied to control the outlet temperature of solar plants with distributed collectors during the last 25 years. Different aspects of the control problem involved in this kind of plants are treated, from modeling and simulation approaches to the different basic control schemes developed and successfully applied in real solar plants. A classification of the modeling and control approaches is used to explain the main features of each strategy. (author)

  20. Controlling the quality of replacement parts in nuclear station, class 1E equipment

    International Nuclear Information System (INIS)

    Pierson, R.K.; Clemons, R.W.

    1984-01-01

    Nuclear station owners have traditionally purchased replacement parts for Class 1E equipment from the original supplier of the equipment. By this method, part and equipment quality could be maintained. In recent years, however, this traditional source of parts has continuously declined as an increasing number of original equipment suppliers stop producing Class 1E equipment or no longer stock parts for older equipment. When replacement parts for Class 1E equipment are not obtainable from the original suppliers, equipment owners have created a variety of methods for assuring the quality of parts obtained from other sources. A standard that provides direction and guidance for maintaining the quality of Class 1E equipment when repaired with parts from alternate sources is, therefore, needed to assure the methods in use are satisfactory and to alert the equipment owners to additional acceptable methods. The standard has now been proposed. IEEE Standard P934 (June, 1983 Draft): ''Requirements for Replacement Parts for Class 1E Equipment in Nuclear Power Generating Stations'' (Ref-3) consist of an introductory section followed by sections on part selection, procurement, replacement (including inspections and tests), non-conforming conditions and records. The proposed standard also includes a non-mandatory appendix on acceptable procurement methods and a summary intended to assist the user in selecting a proper procurement method

  1. Dissociative Part-Dependent Resting-State Activity in Dissociative Identity Disorder: A Controlled fMRI Perfusion Study

    OpenAIRE

    Schlumpf, Yolanda R.; Reinders, Antje A. T. S.; Nijenhuis, Ellert R. S.; Luechinger, Roger; van Osch, Matthias J. P.; Jäncke, Lutz

    2014-01-01

    Background: In accordance with the Theory of Structural Dissociation of the Personality (TSDP), studies of dissociative identity disorder (DID) have documented that two prototypical dissociative subsystems of the personality, the "Emotional Part'' (EP) and the "Apparently Normal Part'' (ANP), have different biopsychosocial reactions to supraliminal and subliminal trauma-related cues and that these reactions cannot be mimicked by fantasy prone healthy controls nor by actors. Methods: Arterial ...

  2. Control of Variability in the Performance of Selective Laser Melting (SLM) Parts through Microstructure Control and Design

    Data.gov (United States)

    National Aeronautics and Space Administration — The high variability and low repeatability of metal parts produced using Additive Manufacturing (AM) represent a major barrier in getting AM into the mainstream....

  3. Internal control as part of prevention irregularities in accounting of budgetary institution

    OpenAIRE

    O.М. Bunda; E.М. Guzenko

    2016-01-01

    The article researches the principles of internal control, the importance, the rationale for the essence of the system of internal control and the legislative building in budgetary institution. It describes the main challenges and problems of practical application of internal control in the normal course of business in modern enterprises. It reveals the following elements of the internal control of a budget institution as: control environment, risk assessment process of a budget institu...

  4. Adaptive Control of Non-Minimum Phase Modal Systems Using Residual Mode Filters2. Parts 1 and 2

    Science.gov (United States)

    Balas, Mark J.; Frost, Susan

    2011-01-01

    Many dynamic systems containing a large number of modes can benefit from adaptive control techniques, which are well suited to applications that have unknown parameters and poorly known operating conditions. In this paper, we focus on a direct adaptive control approach that has been extended to handle adaptive rejection of persistent disturbances. We extend this adaptive control theory to accommodate problematic modal subsystems of a plant that inhibit the adaptive controller by causing the open-loop plant to be non-minimum phase. We will modify the adaptive controller with a Residual Mode Filter (RMF) to compensate for problematic modal subsystems, thereby allowing the system to satisfy the requirements for the adaptive controller to have guaranteed convergence and bounded gains. This paper will be divided into two parts. Here in Part I we will review the basic adaptive control approach and introduce the primary ideas. In Part II, we will present the RMF methodology and complete the proofs of all our results. Also, we will apply the above theoretical results to a simple flexible structure example to illustrate the behavior with and without the residual mode filter.

  5. Structured functional assessments in general practice increased the use of part-time sick leave: a cluster randomised controlled trial.

    Science.gov (United States)

    Osterås, Nina; Gulbrandsen, Pål; Kann, Inger Cathrine; Brage, Søren

    2010-03-01

    A method for structured functional assessments of persons with long-term sick leave was implemented in a cluster randomised controlled trial in general practice. The aim was to analyse intervention effects on general practitioner (GP) sick-listing practice and patient sick leave. 57 GPs were randomly assigned to an intervention or a control group. The intervention group GPs learned the method at a 1-day workshop including teamwork and role-playing. The control group GPs were requested to assess functional ability as usual during the 8 months intervention period in 2005. Outcome measures included duration of patient sick leave episodes, GP prescription of part-time sick leave, active sick leave, and vocational rehabilitation. This data was extracted from a national register. The GPs in the intervention group prescribed part-time sick leave more often (p part-time and less active sick leave compared to the control group GPs. As a result, more intervention GP patients returned to part-time work compared to control GP patients. No intervention effect was seen on duration of patient sick leave episodes or on prescription of vocational rehabilitation.

  6. Controlled production of Camembert-type cheeses. Part I: Microbiological and physicochemical evolutions.

    Science.gov (United States)

    Leclercq-Perlat, Marie-Noëlle; Buono, Frédéric; Lambert, Denis; Latrille, Eric; Spinnler, Henry-Eric; Corrieu, Georges

    2004-08-01

    A holistic approach of a mould cheese ripening is presented. The objective was to establish relationships between the different microbiological and biochemical changes during cheese ripening. Model cheeses were prepared from pasteurized milk inoculated with Kluyveromyces lactis, Geotrichum candidum, Penicillium camemberti and Brevibacterium linens under aseptic conditions. Two cheese-making trials with efficient control of environmental parameters were carried out and showed similar ripening characteristics. K. lactis grew rapidly between days 1 and 6 (generation time around 48 h). G. candidum grew exponentially between days 4 and 10 (generation time around 4.6 d). Brevi. linens also grew exponentially but after day 6 when Pen. camemberti mycelium began developing and the pH of the rind was close to 7. Its exponential growth presented 3 phases in relation to carbon and nitrogen substrate availability. Concentrations of Pen. camemberti mycelium were not followed by viable cell count but they were evaluated visually. The viable microorganism concentrations were well correlated with the carbon substrate concentrations in the core and in the rind. The lactose concentrations were negligible after 10 d ripening, and changes in lactate quantities were correlated with fungi flora. The pH of the inner part depended on NH3. Surface pH was significantly related to NH3 concentration and to fungi growth. The acid-soluble nitrogen (ASN) and non-protein nitrogen (NPN) indexes and NH3 concentrations of the rind were low until day 6, and then increased rapidly to follow the fungi concentrations until day 45. The ASN and NPN indexes and NH3 concentrations in the core were lower than in the rind and they showed the same evolution. G. candidum and Pen. camemberti populations have a major effect on proteolysis; nevertheless, K. lactis and Brevi. linens cell lysis also had an impact on proteolysis. Viable cell counts of K. lactis, G. candidum, Pen. camemberti and Brevi. linens were

  7. Internal control as part of prevention irregularities in accounting of budgetary institution

    Directory of Open Access Journals (Sweden)

    O.М. Bunda

    2016-07-01

    Full Text Available The article researches the principles of internal control, the importance, the rationale for the essence of the system of internal control and the legislative building in budgetary institution. It describes the main challenges and problems of practical application of internal control in the normal course of business in modern enterprises. It reveals the following elements of the internal control of a budget institution as: control environment, risk assessment process of a budget institution, information systems, control procedures and control monitoring. The dependence between the effectiveness of accounting and internal control of a budget institution is determined. The paper highlights the methods of evaluation of internal control of a budget institution. This method is recommended for use in the preliminary assessment of control risk budget institution. The concept of «decision» as on the whole and also in particular in internal control is covered. The essential grouping indications of internal control decisions are defined and every type of decisions is characterized. The main directions of improvement of internal control to prevent violations in accounting of a budgetary institution is examined.

  8. Improving the Quality of Hot Stamping Parts with Innovative Press Technology and Inline Process Control

    Science.gov (United States)

    Vollmer, R.; Palm, C.

    2017-09-01

    The increasing number of hot stamped parts in the automotive industry is challenging different process areas. This paper presents a method how to improve the production rates over the whole life cycle of a hot forming part. In the core element of a hot forming line, the hydraulic press, mainly two processing steps are performed. Forming and quenching of the sheet metal part. In addition to the forming operation, it is inevitable to optimize the quenching condition in the bottom dead centre in order to reach a fully martensitic structure and tight geometrical tolerances of the part. Deviations in the blank thickness, tool wear, polishing of classical tools impair the quenching condition and therefore the part quality over the time. A new press and tool design has been developed to counter this effect by providing homogenous contact pressure over the whole die. Especially with a multi cavity tool, the new method is advantageous. Test series have shown that the new tool and press concept can produce parts with a blank thickness of 1.0 mm within 8.0 s cycle time. The so called PCH flex principle makes it possible to produce such high output rates under reliable conditions.

  9. DC Microgrids–Part I: A Review of Control Strategies and Stabilization Techniques

    Energy Technology Data Exchange (ETDEWEB)

    Dragicevic, Tomislav; Lu, Xiaonan; Vasquez, Juan; Guerrero, Josep

    2015-01-01

    This paper presents a review of control strategies, stability analysis, and stabilization techniques for dc microgrids (MGs). Overall control is systematically classified into local and coordinated control levels according to respective functionalities in each level. As opposed to local control, which relies only on local measurements, some line of communication between units needs to be made available in order to achieve the coordinated control. Depending on the communication method, three basic coordinated control strategies can be distinguished, i.e., decentralized, centralized, and distributed control. Decentralized control can be regarded as an extension of the local control since it is also based exclusively on local measurements. In contrast, centralized and distributed control strategies rely on digital communication technologies. A number of approaches using these three coordinated control strategies to achieve various control objectives are reviewed in this paper. Moreover, properties of dc MG dynamics and stability are discussed. This paper illustrates that tightly regulated point-of-load converters tend to reduce the stability margins of the system since they introduce negative impedances, which can potentially oscillate with lightly damped power supply input filters. It is also demonstrated that how the stability of the whole system is defined by the relationship of the source and load impedances, referred to as the minor loop gain. Several prominent specifications for the minor loop gain are reviewed. Finally, a number of active stabilization techniques are presented.

  10. Stronger than the sum of its parts? The performance implications of peer control combinations in teams

    NARCIS (Netherlands)

    de Jong, Bart A.; Bijlsma-Frankema, Katinka M.; Cardinal, Laura B.

    2014-01-01

    Integrating theorizing on situational strength and complementarity with control theory, we investigate the mediating processes that transmit peer control combination effects to team performance. We argue that two critical peer control mechanisms-norm strength and peer pressure-complement each other

  11. The ash in forest fire affected soils control the soil losses. Part 1. The pioneer research

    Science.gov (United States)

    Cerdà, Artemi; Pereira, Paulo

    2013-04-01

    composition (Pereira and Úbeda, 2010) and Pereira et al., 2012). Some of the new research challenges related to ash impact in the fire affected soils are related to the ash redistribution after the fire, the impact of ash in soil and water chemistry, the temporal changes of soil erosion, the control ash exert on vegetation recovery and the role to be played by ash in the best management of fire affected land. Those topics needs new ideas and new scientists such as Paulo Pereira show in the Part II of this abstract. Acknowledgements, Lithuanian Research Council. Project LITFIRE, Fire effects on Lithuanian soils and ecosystems (MIP-48/2011) and the research projects GL2008-02879/BTE and LEDDRA 243857. References Bodí, M., Mataix-Solera, J., Doerr, S., and Cerdà, A. 2011b. The wettability of ash from burned vegetation and its relationship to Mediterranean plant species type, burn severity and total organic carbon content. Geoderma, 160, 599-607. Cerdà, A. 1998a. Postfire dynamics of erosional processes under mediterranean climatic conditions. Z. Geomorphol., 42 (3) 373-398. Cerdà, A. 1998b. Changes in overland flow and infiltration after a rangeland fire in a Mediterranean scrubland. Hydrological Processes, 12, 1031-1042. Cerdà, A., and Doerr, S. H.2010. The effect of ant mounds on overland flow and soil erodibility following a wildfire in eastern Spain. Ecohydrology, 3, 392-401. Cerdà, A., and Doerr, S.H. 2008. The effect of ash and needle cover on surface runoff and erosion in the immediate post-fire period. Catena, 74, 256-263. Pereira, P., and Úbeda, X. 2010. Spatial distribution of heavy metals released from ashes after a wildfire, Journal of Environment Engineering and Landscape Management, 18, 13-22. Pereira, P., Ubeda, X., Martin, D.A. 2012. Fire severity effects on ash chemical composition and extractable elements. Geoderma, 191, 105 - 114. Pérez-Cabello, F., Cerdà, A., de la Riva, J., Echeverría, M.T., García-Martín, A., Ibarra, P., Lasanta, T., Montorio

  12. Surgical Outcome of Intermittent Exotropia With Improvement in Control Grade Subsequent to Part-time Preoperative Occlusion Therapy.

    Science.gov (United States)

    Bang, Seung Pil; Lee, Dong Cheol; Lee, Se Youp

    2018-01-01

    To evaluate the effect of improvement in the control grade of intermittent exotropia using part-time occlusion therapy on the final postoperative outcome. Control of intermittent exotropia was graded as good, fair, or poor in 89 consecutive patients with intermittent exotropia during their first visit. The patients were reevaluated after part-time preoperative occlusion therapy and divided into two groups (improvement and no improvement) according to whether they showed improvement in control grade. The surgical success rate was compared retrospectively between the two groups. The mean angle of deviation on the first visit was 27.61 ± 5.40 prism diopters (PD) at distance and 29.82 ± 5.28 PD at near. There were significant improvements in the angles of deviation for distance (26.17 ± 5.09 PD) and near (27.26 ± 5.56 PD) after part-time occlusion (both P Part-time occlusion therapy improves the control grade of intermittent exotropia, leading to a better likelihood of successful surgery and a reduction of the angles of deviation for distance and near. [J Pediatr Ophthalmol Strabismus. 2018;55(1):59-64.]. Copyright 2017, SLACK Incorporated.

  13. An alternative method for noise analysis using pixel variance as part of quality control procedures on digital mammography systems.

    NARCIS (Netherlands)

    Bouwman, R.; Young, K.; Lazzari, B.; Ravaglia, V.; Broeders, M.J.M.; Engen, R. van

    2009-01-01

    According to the European Guidelines for quality assured breast cancer screening and diagnosis, noise analysis is one of the measurements that needs to be performed as part of quality control procedures on digital mammography systems. However, the method recommended in the European Guidelines does

  14. The control of a free-piston engine generator. Part 1: Fundamental analyses

    Energy Technology Data Exchange (ETDEWEB)

    Mikalsen, R.; Roskilly, A.P. [Sir Joseph Swan Institute for Energy Research, Newcastle University, Newcastle upon Tyne, NE1 7RU, England (United Kingdom)

    2010-04-15

    Free-piston engines are under investigation by a number of research groups due to potential fuel efficiency and exhaust emissions advantages over conventional technology. The main challenge with such engines is the control of the piston motion, and this has not yet been fully resolved for all types of free-piston engines. This paper discusses the basic features of a single piston free-piston engine generator under development at Newcastle University and investigates engine control issues using a full-cycle simulation model. Control variables and disturbances are identified, and a control strategy is proposed. It is found that the control of the free-piston engine is a challenge, but that the proposed control strategy is feasible. Engine speed control does, however, represent a challenge in the current design. (author)

  15. Radiation protection at the RA Reactor in 1985, Part -2, Annex 2b, Environmental Radioactivity control, Control of air contamination

    International Nuclear Information System (INIS)

    Patic, D.; Smiljanic, R.; Zaric, M.; Savic, Z.; Ristic, D.

    1985-01-01

    During the period from November 1984 - November 1985, within the radioactivity control on the Vinca Institute site air contamination radioactive aerosol contents was measured. Control was done on 4 measuring stations, two in the Institute and two locations in the direction of wind i.e. Belgrade, 2 km and 7 km away from the Institute respectively. This position of the measuring locations enables control of radiation safety of the Institute, as well as environment of Belgrade taking into account the existence of the reactor and other possible contaminants in the Institute [sr

  16. Contamination control requirements implementation for the James Webb Space Telescope (JWST), part 2: spacecraft, sunshield, observatory, and launch

    Science.gov (United States)

    Wooldridge, Eve M.; Schweiss, Andrea; Henderson-Nelson, Kelly; Woronowicz, Michael; Patel, Jignasha; Macias, Matthew; McGregor, R. Daniel; Farmer, Greg; Schmeitzky, Olivier; Jensen, Peter; Rumler, Peter; Romero, Beatriz; Breton, Jacques

    2014-09-01

    This paper will continue from Part 1 of JWST contamination control implementation. In addition to optics, instruments, and thermal vacuum testing, JWST also requires contamination control for a spacecraft that must be vented carefully in order to maintain solar array and thermal radiator thermal properties; a tennis court-sized sunshield made with 1-2 mil Kapton™ layers that must be manufactured and maintained clean; an observatory that must be integrated, stowed and transported to South America; and a rocket that typically launches commercial payloads without contamination sensitivity. An overview of plans developed to implement contamination control for the JWST spacecraft, sunshield, observatory and launch vehicle will be presented.

  17. Design Process Control for Improved Surface Finish of Metal Additive Manufactured Parts of Complex Build Geometry

    Directory of Open Access Journals (Sweden)

    Mikdam Jamal

    2017-12-01

    Full Text Available Metal additive manufacturing (AM is increasingly used to create complex 3D components at near net shape. However, the surface finish (SF of the metal AM part is uneven, with surface roughness being variable over the facets of the design. Standard post-processing methods such as grinding and linishing often meet with major challenges in finishing parts of complex shape. This paper reports on research that demonstrated that mass finishing (MF processes are able to deliver high-quality surface finishes (Ra and Sa on AM-generated parts of a relatively complex geometry (both internal features and external facets under select conditions. Four processes were studied in this work: stream finishing, high-energy (HE centrifuge, drag finishing and disc finishing. Optimisation of the drag finishing process was then studied using a structured design of experiments (DOE. The effects of a range of finishing parameters were evaluated and optimal parameters and conditions were determined. The study established that the proposed method can be successfully applied in drag finishing to optimise the surface roughness in an industrial application and that it is an economical way of obtaining the maximum amount of information in a short period of time with a small number of tests. The study has also provided an important step in helping understand the requirements of MF to deliver AM-generated parts to a target quality finish and cycle time.

  18. 40 CFR Appendix B to Part 75 - Quality Assurance and Quality Control Procedures

    Science.gov (United States)

    2010-07-01

    ...-, nozzle-, or venturi-type fuel flowmeter under section 2.1.6 of appendix D to this part. These procedures... procedures for inspection of the primary element (i.e., orifice, venturi, or nozzle) of an orifice-, venturi... bypass stack, each of which has a certified flow monitor (e.g., a unit with a wet SO2 scrubber...

  19. Solution of task related to control of swiss-type automatic lathe to get planes parallel to part axis

    Science.gov (United States)

    Tabekina, N. A.; Chepchurov, M. S.; Evtushenko, E. I.; Dmitrievsky, B. S.

    2018-05-01

    The work solves the problem of automation of machining process namely turning to produce parts having the planes parallel to an axis of rotation of part without using special tools. According to the results, the availability of the equipment of a high speed electromechanical drive to control the operative movements of lathe machine will enable one to get the planes parallel to the part axis. The method of getting planes parallel to the part axis is based on the mathematical model, which is presented as functional dependency between the conveying velocity of the driven element and the time. It describes the operative movements of lathe machine all over the tool path. Using the model of movement of the tool, it has been found that the conveying velocity varies from the maximum to zero value. It will allow one to carry out the reverse of the drive. The scheme of tool placement regarding the workpiece has been proposed for unidirectional movement of the driven element at high conveying velocity. The control method of CNC machines can be used for getting geometrically complex parts on the lathe without using special milling tools.

  20. Control of cattle trypanosomiasis in coastal savannah of Ghana Part I

    African Journals Online (AJOL)

    Triangulation design of mixed-mode research on control of trypanosomiasis involving Participatory Rural Appr-aisal (PRA), surveys, parasitological studies and satellite ... The research focussed on farmer's production objectives, use of Berenil® to control trypanosomiasis, and satellite mapping of areas at risk of diseases for ...

  1. The control of a free-piston engine generator. Part 2: Engine dynamics and piston motion control

    Energy Technology Data Exchange (ETDEWEB)

    Mikalsen, R.; Roskilly, A.P. [Sir Joseph Swan Institute for Energy Research, Newcastle University, Newcastle upon Tyne, NE1 7RU England (United Kingdom)

    2010-04-15

    Free-piston engines are under investigation by a number of research groups due to potential fuel efficiency and exhaust emissions advantages over conventional technology. The main challenge with such engines is the control of the piston motion, and this has not yet been fully resolved for all types of free-piston engines. This paper builds on the fundamental investigations presented in the accompanying paper and investigates the dynamics of the engine and the feasibility of classical control approaches. The response of the engine to rapid load changes are investigated using decentralised PID, PDF and disturbance feedforward. It is found that the engine is sensitive to rapid load changes but that in constant power applications standard control techniques provide satisfactory performance. The influence of cycle-to-cycle variations in the combustion process are investigated, but not found to be critical for engine operation. (author)

  2. Aplicación de RT-Linux en el control de motores de pasos. Parte II; Appication of RT-Linux in the Control of Steps Motors. Part II

    Directory of Open Access Journals (Sweden)

    Ernesto Duany Renté

    2011-02-01

    Full Text Available Este trabajo complementa al presentado anteriormente: "Aplicación de RT-Linux en el control de motoresde pasos. Primera parte", de manera que se puedan relacionar a las tareas de adquisición y control para laobtención de un sistema lo más exacto posible. Las técnicas empleadas son las de tiempo real aprovechandolas posibilidades del microkernel RT-Linux y los software libres contenidos en sistemas Unix/Linux. Lasseñales se obtienen mediante un conversor AD y mostradas en pantalla empleando el Gnuplot.  The work presented in this paper is a complement to the control and acquisition tasks which were explainedin "Application of RT-Linux in the Control of Steps Motors. First Part", so that those both real time taskscan be fully related in order to make the whole control system more accurate. The employed techniquesare those of Real Time Taking advantage of the possibilities of the micro kernel RT-Linux and the freesoftware distributed in the Unix/Linux operating systems. The signals are obtained by means of an ADconverter and are shown in screen using Gnuplot.

  3. Active Control of Low-Speed Fan Tonal Noise Using Actuators Mounted in Stator Vanes: Part III Results

    Science.gov (United States)

    Sutliff, Daniel L.; Remington, Paul J.; Walker, Bruce E.

    2003-01-01

    A test program to demonstrate simplification of Active Noise Control (ANC) systems relative to standard techniques was performed on the NASA Glenn Active Noise Control Fan from May through September 2001. The target mode was the m = 2 circumferential mode generated by the rotor-stator interaction at 2BPF. Seven radials (combined inlet and exhaust) were present at this condition. Several different error-sensing strategies were implemented. Integration of the error-sensors with passive treatment was investigated. These were: (i) an in-duct linear axial array, (ii) an induct steering array, (iii) a pylon-mounted array, and (iv) a near-field boom array. The effect of incorporating passive treatment was investigated as well as reducing the actuator count. These simplified systems were compared to a fully ANC specified system. Modal data acquired using the Rotating Rake are presented for a range of corrected fan rpm. Simplified control has been demonstrated to be possible but requires a well-known and dominant mode signature. The documented results here in are part III of a three-part series of reports with the same base title. Part I and II document the control system and error-sensing design and implementation.

  4. Superconducting Qubit with Integrated Single Flux Quantum Controller Part I: Theory and Fabrication

    Science.gov (United States)

    Beck, Matthew; Leonard, Edward, Jr.; Thorbeck, Ted; Zhu, Shaojiang; Howington, Caleb; Nelson, Jj; Plourde, Britton; McDermott, Robert

    As the size of quantum processors grow, so do the classical control requirements. The single flux quantum (SFQ) Josephson digital logic family offers an attractive route to proximal classical control of multi-qubit processors. Here we describe coherent control of qubits via trains of SFQ pulses. We discuss the fabrication of an SFQ-based pulse generator and a superconducting transmon qubit on a single chip. Sources of excess microwave loss stemming from the complex multilayer fabrication of the SFQ circuit are discussed. We show how to mitigate this loss through judicious choice of process workflow and appropriate use of sacrificial protection layers. Present address: IBM T.J. Watson Research Center.

  5. Japanese contributions to IAEA INTOR workshop, phase two A, part 2, chapter III: impurity control (engineering)

    International Nuclear Information System (INIS)

    Seki, Masahiro; Miki, Nobuharu; Shibutani, Yoji; Fujimura, Kaoru; Adachi, Jun-ichi; Sato, Kosuke; Fujii, Masaharu; Yamazaki, Seiichiro; Itoh, Shin-ichi.

    1985-07-01

    This report corresponds to the second half of Chapter III of Japanese contribution report to IAEA INTOR Workshop, Phase Two A, Part 2. Data base assessment are made on candidate materials for the divertor, limiter, and the first wall. Engineering trade-off studies are made for the high-recycling and low temperature conditions. The studies include material considerations, configuration, thermohydraulic and stress analysis, disruption, lifetime analysis, and tritium permeation. (author)

  6. Parts, materials, and processes experience summary, volume 2. [design, engineering, and quality control

    Science.gov (United States)

    1973-01-01

    This summary provides the general engineering community with the accumulated experience from ALERT reports issued by NASA and the Government-Industry. Data Exchange Program, and related experience gained by Government and industry. It provides expanded information on selected topics by relating the problem area (failure) to the cause, the investigation and findings, the suggestions for avoidance (inspections, screening tests, proper part applications, requirements for manufacturer's plant facilities, etc.), and failure analysis procedures. Diodes, integrated circuits, and transistors are covered in this volume.

  7. Procurement and control of spare and replacement parts - a regulatory perspective

    International Nuclear Information System (INIS)

    Baker, E.T.; Grimes, B.K.; Merschoff, E.W.

    1987-01-01

    As the nuclear industry shifts from a construction to an operations orientation, a number of fundamental changes have occurred in the type of safety-related procurements and the manner in which the utilities accomplish these procurements. Specifically, procurements have shifted from the purchase of large systems and components by architect-engineers, and nuclear steam supply system (NSSS) suppliers to the procurement by utilities of subassemblies, individual pieces of equipment (e.g., breakers, relays), and small parts for repairing individual pieces of equipment. To ensure that equipment will continue to perform its intended function and to satisfy regulatory requirements utilities must consider several things: (1) does the equipment perform a safety function; (2) does the replacement part affect the safety function; and (3) does the replacement part affect the seismic or environmental qualification. If the answer to any of these questions is yes, the purchaser has two alternatives. He may procure the item as safety-related and require the supplier or manufacturer to comply with all the applicable technical and quality requirements or he may purchase the item commercial grade and perform the necessary inspections and tests to ensure the item meets the requirements, i.e., dedicate the item

  8. Automated process control system for heat-treating nuclear power station parts

    International Nuclear Information System (INIS)

    Afanasiadi, N.G.; Demin, V.P.; Launin, B.N.

    1984-01-01

    The basic factors determining the need for an automated process control system (APCS) are discussed, as are system requirements. The basic tasks solved by the system are discussed. The functional scheme for a decentralized, two-level APCS is given

  9. Proceedings of the 2004 NASA/ONR Circulation Control Workshop, Part 1

    Science.gov (United States)

    Jones, Gregory S. (Editor); Joslin, Ronald D. (Editor)

    2005-01-01

    As technological advances influence the efficiency and effectiveness of aerodynamic and hydrodynamic applications, designs and operations, this workshop was intended to address the technologies, systems, challenges and successes specific to Coanda driven circulation control in aerodynamics and hydrodynamics. A major goal of this workshop was to determine the 2004 state-of-the-art in circulation control and understand the roadblocks to its application. The workshop addressed applications, CFD, and experiments related to circulation control, emphasizing fundamental physics, systems analysis, and applied research. The workshop consisted of 34 single session oral presentations and written papers that focused on Naval hydrodynamic vehicles (e.g. submarines), Fixed Wing Aviation, V/STOL platforms, propulsion systems (including wind turbine systems), ground vehicles (automotive and trucks) and miscellaneous applications (e.g., poultry exhaust systems and vacuum systems). Several advanced CFD codes were benchmarked using a two-dimensional NCCR circulation control airfoil. The CFD efforts highlighted inconsistencies in turbulence modeling, separation and performance predictions.

  10. Part II - Effects of Cross-Sectional Partitioning on Active Noise Control in Round Ducts

    National Research Council Canada - National Science Library

    Slagley, Jeremy M; Guffey, Steven E

    2006-01-01

    .... Higher order mode waves are much more difficult to control Basic acoustic principles dictate that the cut-on frequency at which higher order modes will first begin to eclipse simple plane waves...

  11. Knowledge-Based Control Systems via Internet Part I. Applications in Biotechnology

    Directory of Open Access Journals (Sweden)

    Georgi Georgiev

    2005-04-01

    Full Text Available An extensive approach towards the dissemination of expert knowledge and coordination efforts to distributed points and seamless integration of control strategies applied to distributed yet identical systems is crucial to enhance overall efficiency and operational costs. Application of Knowledge-Based Control System via Internet will be very efficient especially in biotechnology, because many industrial bioprocesses, based on the same technological principles, are distributed in the whole world. Brewing industry oriented practical solutions illustrate this approach.

  12. 3-D conformal radiation therapy - Part II: Computer-controlled 3-D treatment delivery

    International Nuclear Information System (INIS)

    Benedick, A.

    1997-01-01

    Purpose/Objective: This course will describe the use of computer-controlled treatment delivery techniques for treatment of patients with sophisticated conformal therapy. In particular, research and implementation issues related to clinical use of computer-controlled conformal radiation therapy (CCRT) techniques will be discussed. The possible/potential advantages of CCRT techniques will be highlighted using results from clinical 3-D planning studies. Materials and Methods: In recent years, 3-D treatment planning has been used to develop and implement 3-D conformal therapy treatment techniques, and studies based on these conformal treatments have begun to show the promise of conformal therapy. This work has been followed by the development of commercially-available multileaf collimator and computer control systems for treatment machines. Using these (and other) CCRT devices, various centers are beginning to clinically use complex computer-controlled treatments. Both research and clinical CCRT treatment techniques will be discussed in this presentation. General concepts and requirements for CCRT will be mentioned. Developmental and clinical experience with CCRT techniques from a number of centers will be utilized. Results: Treatment planning, treatment preparation and treatment delivery must be approached in an integrated fashion in order to clinically implement CCRT treatment techniques, and the entire process will be discussed. Various CCRT treatment methodologies will be reviewed from operational, dosimetric, and technical points of view. The discussion will concentrate on CCRT techniques which are likely to see rather wide dissemination over the next several years, including particularly the use of multileaf collimators (MLC), dynamic and segmental conformal therapy, conformal field shaping, and other related techniques. More advanced CCRT techniques, such as the use of individualized intensity modulation of beams or segments, and the use of computer-controlled

  13. Fuel cell-gas turbine hybrid system design part II: Dynamics and control

    Science.gov (United States)

    McLarty, Dustin; Brouwer, Jack; Samuelsen, Scott

    2014-05-01

    Fuel cell gas turbine hybrid systems have achieved ultra-high efficiency and ultra-low emissions at small scales, but have yet to demonstrate effective dynamic responsiveness or base-load cost savings. Fuel cell systems and hybrid prototypes have not utilized controls to address thermal cycling during load following operation, and have thus been relegated to the less valuable base-load and peak shaving power market. Additionally, pressurized hybrid topping cycles have exhibited increased stall/surge characteristics particularly during off-design operation. This paper evaluates additional control actuators with simple control methods capable of mitigating spatial temperature variation and stall/surge risk during load following operation of hybrid fuel cell systems. The novel use of detailed, spatially resolved, physical fuel cell and turbine models in an integrated system simulation enables the development and evaluation of these additional control methods. It is shown that the hybrid system can achieve greater dynamic response over a larger operating envelope than either individual sub-system; the fuel cell or gas turbine. Results indicate that a combined feed-forward, P-I and cascade control strategy is capable of handling moderate perturbations and achieving a 2:1 (MCFC) or 4:1 (SOFC) turndown ratio while retaining >65% fuel-to-electricity efficiency, while maintaining an acceptable stack temperature profile and stall/surge margin.

  14. Use of statistic control of the process as part of a quality assurance plan; Empleo del control estadistico de proceso como parte de un plan de aseguramiento de la calidad

    Energy Technology Data Exchange (ETDEWEB)

    Acosta, S.; Lewis, C., E-mail: sacosta@am.gob.ar [Autoridad Regulatoria Nuclear (ARN), Buenos Aires (Argentina)

    2013-07-01

    One of the technical requirements of the standard IRAM ISO 17025 for the accreditation of testing laboratories, is the assurance of the quality of the results through the control and monitoring of the factors influencing the reliability of them. The grade the factors contribute to the total measurement uncertainty, determines which of them should be considered when developing a quality assurance plan. The laboratory of environmental measurements of strontium-90 in the accreditation process, performs most of its determinations in samples with values close to the detection limit. For this reason the correct characterization of the white, is a critical parameter and is verified through a letter for statistical process control. The scope of the present work is concerned the control of whites and so it was collected a statistically significant amount of data, for a period of time that is covered of different conditions. This allowed consider significant variables in the process, such as temperature and humidity, and build a graph of white control, which forms the basis of a statistical process control. The data obtained were lower and upper limits for the preparation of the charter white control. In this way the process of characterization of white was considered to operate under statistical control and concludes that it can be used as part of a plan of insurance of the quality.

  15. Design verification and fabrication of active control systems for the DAST ARW-2 high aspect ratio wing. Part 2: Appendices

    Science.gov (United States)

    Mcgehee, C. R.

    1986-01-01

    This is Part 2-Appendices of a study conducted under Drones for Aerodynamic and Structural Testing (DAST) Program to accomplish the final design and hardware fabrication for four active control systems compatible with and ready for installation in the NASA Aeroelastic Research Wing No. 2 (ARW-2) and Firebee II drone flight test vehicle. The wing structure was designed so that Active Control Systems (ACS) are required in the normal flight envelope by integrating control system design with aerodynamics and structure technologies. The DAST ARW-2 configuration uses flutter suppression, relaxed static stability, and gust and maneuver load alleviation ACS systems, and an automatic flight control system. Performance goals and criteria were applied to individual systems and the systems collectively to assure that vehicle stability margins, flutter margins, flying qualities, and load reductions were achieved.

  16. Economic energy distribution and consumption in a microgrid Part1: Cell level controller

    DEFF Research Database (Denmark)

    Tahersima, Fatemeh; Andersen, Palle; Madsen, Per Printz

    2013-01-01

    We have investigated energy management of a small scale electrical microgrid comprised of local renewable generation, consumption and storage units. The microgrid has the possibility of connection to the electricity grid as well to compensate for energy deficit. The objective is to fulfill...... microgrid's energy demands from the local electricity producers as much as possible. The other objective is to manage the consumption such that consumption costs are minimum for all households. To fulfill the objectives, as the first step of designing a hierarchical controller, we focused on designing...... an energy and cost minimizing controller for one building. To this aim, a model predictive controller is formulated to schedule the building's energy consumption using potential load flexibility. Simulation results show the economically optimal energy consumption of one building based on the defined load...

  17. Countermeasures for electrolytic corrosion - Part II: Implementation of a rapid potential-controlled rectifier

    Energy Technology Data Exchange (ETDEWEB)

    Ha, Tae-Hyun; Kim, Dae-Kyeong; Lee, Hyun-Goo; Ha, Yoon-Cheol; Bae, Jeong-Hyo [Underground Systems Group, Korea Electrotechnology Research Institute, 28-1 Sungju-dong, Changwon, 641-120 (Korea)

    2004-07-01

    In electrolytic interference circumstances such as underground pipelines in the vicinity of DC electrified railroads, drainage method or impressed current cathodic protection method has been widely used as a countermeasure for the electrolytic corrosion. In the former method, forced or polarized drainage is commonly adopted and in the latter, the phase-controlled rectifier with thyristor is in common use. Both methods, however, does not show as the optimal measure for the integrity of the pipeline, since the pipe-to-soil potential fluctuates highly positive to the cathodic protection criterion. In particular, as the potential of the pipeline near the railroad varies rapidly, a new rapidly responding countermeasure is necessary. In this paper, we introduce a new rapid potential controlled rectifier and report the result in field tests. Comparison with the existing forced drainage method is also made. The pipe-to-soil potential data show the effectiveness of the rapid potential-controlled rectifier. (authors)

  18. Electronically controlled mechanical seal for aerospace applications--Part 2: Transient tests

    Science.gov (United States)

    Wolff, Paul J.; Salant, Richard F.

    1995-01-01

    An electronically controlled mechanical seal for use as the purge gas seal in a liquid oxygen turbopump has been fabricated and tested under transient operating conditions. The thickness of the lubricating film is controlled by adjusting the coning of the carbon face. This is accomplished by applying a voltage to a piezoelectric actuator to which the carbon face is bonded. The seal has been operated with a closed-loop control system that utilizes either the leakage rate or seal face temperature as the feedback. Both speed and pressure transients have been imposed on the seal. The transient tests have demonstrated that the seal is capable of maintaing low leakage rates while limiting face temperatures.

  19. Modulation linearization of a frequency-modulated voltage controlled oscillator, part 3

    Science.gov (United States)

    Honnell, M. A.

    1975-01-01

    An analysis is presented for the voltage versus frequency characteristics of a varactor modulated VHF voltage controlled oscillator in which the frequency deviation is linearized by using the nonlinear characteristics of a field effect transistor as a signal amplifier. The equations developed are used to calculate the oscillator output frequency in terms of pertinent circuit parameters. It is shown that the nonlinearity exponent of the FET has a pronounced influence on frequency deviation linearity, whereas the junction exponent of the varactor controls total frequency deviation for a given input signal. A design example for a 250 MHz frequency modulated oscillator is presented.

  20. Electronically Controlled Mechanical Seal for Aerospace Applications -- Part 1: Design, Analysis, and Steady State Tests

    Science.gov (United States)

    Salant, Richard F.; Wolff, Paul; Navon, Samuel

    1994-01-01

    An electronically-controlled mechanial seal, for use as the purge gas seal in a liquid oxygen turbopump, has been designed, analyzed, and built. The thickness of the lubricating film between the faces is controlled by adjusting the coning of the carbon face. This is done by applying a voltage across a piezoelectric element to which the carbon face is bound. Steady state tests have shown that the leakage rate (and film thickness) can be adjusted over a substantial range, utilizing the available range of voltage.

  1. Electronically controled mechanical seal for aerospace applications -- Part 1: Design, analysis, and steady state tests

    Science.gov (United States)

    Salant, Richard F.; Wolff, Paul; Navon, Samuel

    1994-01-01

    An electronically-controlled mechanial seal, for use as the purge gas seal in a liquid oxygen turbopump, has been designed, analyzed, and built. The thickness of the lubricating film between the faces is controlled by adjusting the coning of the carbon face. This is done by applying a voltage across a piezoelectric element to which the carbon face is bound. Steady state tests have shown that the leakage rate (and film thickness) can be adjusted over a substantial range, utilizing the available range of voltage.

  2. 33 CFR Appendix E to Part 157 - Specifications for the Design, Installation and Operation of a Part Flow System for Control of...

    Science.gov (United States)

    2010-07-01

    ... established by the Administration and which shall at least contain all the provisions of these Specifications. 2.2The part flow concept is based on the principle that the observation of a representative part... arrangements acceptable to the Administration. 3.3The display of the part flow shall be arranged in a sheltered...

  3. Radiation protection at the RA Reactor in 1985, Part -2, Annex 1, Radioactivity control of working environment, dosimetry

    International Nuclear Information System (INIS)

    Ninkovic, M.; Bjelanovic, J.; Minincic, Z.; Komatina, R.; Raicevic, J.

    1985-01-01

    This report contains data and analysis of the of measured sample results collected during radiation protection control in the working environment of the RA reactor. First part contains basic exposure values and statistical review of the the total number of radiation measurements. It includes contents of radioactive gasses and effluents in the air, as well as the level of surface contamination of clothes and uncovered parts of the personnel bodies. Second part deals with the analysis of personnel doses. It was found that the maximum individual dose from external irradiation amounted to 8.2 mSV during past 10 months. Individual exposures for 7/10 of the personnel were less than 1/10 of the annual permissible exposure. Data are compared to radiation doses for last year and previous five years. Third part of this annex contains basic data about the quantity of collected radioactive waste, total quantity of contaminated and decontaminated surfaces. The last part analyzes accidents occurred at the reactor during 1985. It was found that there have been no accidents that could cause significant contamination of working surfaces and components nor radiation exposure of the personnel [sr

  4. Computer-controlled neutron time-of-flight spectrometer. Part II

    International Nuclear Information System (INIS)

    Merriman, S.H.

    1979-12-01

    A time-of-flight spectrometer for neutron inelastic scattering research has been interfaced to a PDP-15/30 computer. The computer is used for experimental data acquisition and analysis and for apparatus control. This report was prepared to summarize the functions of the computer and to act as a users' guide to the software system

  5. Electrical Experiments. VT-214-12-1. Part I. Electric Motor Control.

    Science.gov (United States)

    Connecticut State Dept. of Education, Hartford. Div. of Vocational Education.

    Designed for high school electronics students, this first document in a series of six electrical learning activity packages focuses on electric motor control. An introductory section gives the objective for the activities, an introduction, and an outline of the content. The remainder of the activity book is comprised of information sheets and job…

  6. Control Engineering as a Part of Undergraduate Curriculum for Mechanical Engineering in India

    Science.gov (United States)

    Akhtar, Shagil; Iqbal, Syed Muneeb; Bajpai, Shrish

    2016-01-01

    In this present study we have traced the genesis of control engineering in the scope of mechanical engineering and then some analysis on its recent developments, their increasing need and how this particular subject has evolved machines functioning nowadays specifically its standard of education in India. We have probed this field right from its…

  7. Atomic Energy Control Board 1991-92 estimates part III expenditure plan

    International Nuclear Information System (INIS)

    1991-01-01

    This Expenditure Plan is designed to be used as a reference document. As such, it contains several levels of detail to respond to the various needs of its audience. This Plan is divided into two sections. Section 1 presents an overview of the Program including a description, information on its background, objectives and planning perspective as well as performance information that forms the basis for the resources requested. Section 2 provides further information on costs and resources as well as special analyses that the reader may require to understand the Program more fully. Section 1 is preceded by details of Spending Authorities from Part 2 of the Estimates and Volume 2 of the Public Accounts. This is to provide continuity with other Estimates documents and to help in assessing the Program's financial performance over the past year. 22 figs

  8. Atomic Energy Control Board 1991-92 estimates part III expenditure plan

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-12-31

    This Expenditure Plan is designed to be used as a reference document. As such, it contains several levels of detail to respond to the various needs of its audience. This Plan is divided into two sections. Section 1 presents an overview of the Program including a description, information on its background, objectives and planning perspective as well as performance information that forms the basis for the resources requested. Section 2 provides further information on costs and resources as well as special analyses that the reader may require to understand the Program more fully. Section 1 is preceded by details of Spending Authorities from Part 2 of the Estimates and Volume 2 of the Public Accounts. This is to provide continuity with other Estimates documents and to help in assessing the Program`s financial performance over the past year. 22 figs.

  9. Atomic Energy Control Board 1992-93 estimates part III expenditure plan

    International Nuclear Information System (INIS)

    1992-01-01

    This Expenditure Plan is designed to be used as a reference document. As such, it contains several levels of detail to respond to the various needs of its audience. This Plan is divided into two sections. Section 1 presents an overview of the Program including a description, information on its background, objectives and planning perspective as well as performance information that forms the basis for the resources requested. Section 2 provides further information on costs and resources as well as special analyses that the reader may require to understand the Program more fully. Section 1 is preceded by details of Spending Authorities from Part 2 of the Estimates and Volume 2 of the Public Accounts. This is to provide continuity with other Estimates documents and to help in assessing the Program's financial performance over the past year. 7 refs., 21 figs

  10. Atomic Energy Control Board 1992-93 estimates part III expenditure plan

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-31

    This Expenditure Plan is designed to be used as a reference document. As such, it contains several levels of detail to respond to the various needs of its audience. This Plan is divided into two sections. Section 1 presents an overview of the Program including a description, information on its background, objectives and planning perspective as well as performance information that forms the basis for the resources requested. Section 2 provides further information on costs and resources as well as special analyses that the reader may require to understand the Program more fully. Section 1 is preceded by details of Spending Authorities from Part 2 of the Estimates and Volume 2 of the Public Accounts. This is to provide continuity with other Estimates documents and to help in assessing the Program`s financial performance over the past year. 7 refs., 21 figs.

  11. Control of very heavy water inrush from sinkholes connecting with Ordovician limestone. Part 1. [China

    Energy Technology Data Exchange (ETDEWEB)

    1986-01-01

    This paper describes the comprehensive water control methods used in Fangezhuang Colliery: water drainage; cutting off of water; and sealing off the water. For water drainage, 20 large-sized submarine pumps were used in Lujiatuo and Fangezhuang collieries with a delivery of 300 m/sup 3//min to control the rising of water level. For cutting off the water, a three-section horizontal injection method and 8 grouting techniques were applied to cut off the water in 3 roadways at the boundary between Lujiatuo and Fangezhuang with water flowing at an average rate of 300 m/sup 3//min. For sealing off the water, a radio perspective instrument was used to detect the shape of No. 2171 sinkhole in Fangezhuang, and computers were employed to process the hydrogeological data. The three section vertical grouting method was introduced, and the inrush water source was sealed off with a success of over 99%.

  12. NOx emission control for gas turbines: A 1991 update on regulations and technology (Part II)

    International Nuclear Information System (INIS)

    Schorr, M.M.

    1991-01-01

    The technologies that are available for the control of NO x emissions from gas turbines utilize the factors that impact the formation of NO x described in the previous section and include (1) diluent injection (i.e., water or steam) into the combustion zone, which is a front-end control technology that lowers the combustor flame temperature, (2) selective catalytic reduction (SCR), which is a back-end exhaust gas cleanup system, (3) dry low NO x combustors (DLN), which use staged combustion and very lean fuel-air mixtures (they are currently being introduced), and (4) catalytic combustion systems that hold the promise of achieving extremely low emission levels without resorting to exhaust gas cleanup. This last option is being developed to burn very lean fuel-air mixtures, but will require significant technological breakthroughs; it is still several years away from becoming commercially available

  13. Performance of Charcoal Cookstoves for Haiti, Part 2: Results from the Controlled Cooking Test

    Energy Technology Data Exchange (ETDEWEB)

    Lask, Kathleen; Jones, Jennifer; Booker, Kayje; Ceballos, Cristina; Yang, Nina; Gadgil, Ashok

    2011-11-30

    Five charcoal cookstoves were tested using a Controlled Cooking Test (CCT) developed from cooking practices in Haiti. Cookstoves were tested for total burn time, specific fuel consumption, and emissions of carbon monoxide (CO), carbon dioxide (CO2), and the ratio of carbon monoxide to carbon dioxide (CO/CO2). These results are presented in this report along with LBNL testers’ observations regarding the usability of the stoves.

  14. Lunar Module ECS (Environmental Control System) - Design Considerations and Failure Modes. Part 1

    Science.gov (United States)

    Interbartolo, Michael

    2009-01-01

    Design considerations and failure modes for the Lunar Module (LM) Environmental Control System (ECS) are described. An overview of the the oxygen supply and cabin pressurization, atmosphere revitalization, water management and heat transport systems are provided. Design considerations including reliability, flight instrumentation, modularization and the change to the use of batteries instead of fuel cells are discussed. A summary is provided for the LM ECS general testing regime.

  15. Industrial opportunities of controlled melt flow during glass melting, part 1: Melt flow evaluation

    Czech Academy of Sciences Publication Activity Database

    Dyrčíková, Petra; Hrbek, Lukáš; Němec, Lubomír

    2014-01-01

    Roč. 58, č. 2 (2014), s. 111-117 ISSN 0862-5468 R&D Projects: GA TA ČR TA01010844 Institutional support: RVO:67985891 Keywords : glass melting * controlled flow * space utilization Subject RIV: JH - Ceramics, Fire-Resistant Materials and Glass Impact factor: 0.435, year: 2014 http://www.ceramics-silikaty.cz/2014/pdf/2014_02_111.pdf

  16. Legendre-tau approximation for functional differential equations. Part 2: The linear quadratic optimal control problem

    Science.gov (United States)

    Ito, K.; Teglas, R.

    1984-01-01

    The numerical scheme based on the Legendre-tau approximation is proposed to approximate the feedback solution to the linear quadratic optimal control problem for hereditary differential systems. The convergence property is established using Trotter ideas. The method yields very good approximations at low orders and provides an approximation technique for computing closed-loop eigenvalues of the feedback system. A comparison with existing methods (based on averaging and spline approximations) is made.

  17. Production and quality control of concrete for the Rajasthan Atomic Power Station - [Part 1

    International Nuclear Information System (INIS)

    Singha Roy, P.K.; Sukhtankar, K.D.; Prasad, K.

    1975-01-01

    The production and quality control of concrete and concrete materials for the construction of the twin-reactor Rajasthan Atomic Power Station with its 400 MW net capacity posed many challenges since many of the requirements for the properties of concrete were new and were being laid down for the first time in India. Some of the conditions for the concrete included leak-tightness against gas pressure, total absence of shrinkage in the containment even when the ambient temperature during concreting was as high as 45degC, placing concrete at a temperature as low as 8degC, the use of non-shrink and high strength grout, absolute impermeability against water, high density for radiation shielding, controlled modulus of elasticity for large machine foundations, high strength with high slump for the prestressed concrete dome, etc. Though the total quantity of concrete was not very much compared with a large river valley or steel plant project, (e.g., about 1.2 X 10 6 m 3 for a 2-million tonne steel plant) it was quite significant, being about 70,000 m 3 of normal density and 2,100 m 3 of high density concrete. The production of these quantities entailed intensive material study and investigation, development of new mixes with additives not tried out before in the country, and design and quality control techniques which were unique in many respects. The paper deals with the production and quality control of concrete, including grouts used in the projects, but the actual concreting and construction operations are not discussed. (author)

  18. Formation flying for electric sails in displaced orbits. Part II: Distributed coordinated control

    Science.gov (United States)

    Wang, Wei; Mengali, Giovanni; Quarta, Alessandro A.; Yuan, Jianping

    2017-09-01

    We analyze a cooperative control framework for electric sail formation flying around a heliocentric displaced orbit, aiming at observing the polar region of a celestial body. The chief spacecraft is assumed to move along an elliptic displaced orbit, while each deputy spacecraft adjusts its thrust vector (that is, both its sail attitude and characteristic acceleration) in order to track a prescribed relative trajectory. The relative motion of the electric sail formation system is formulated in the chief rotating frame, where the control inputs of each deputy are the relative sail attitude angles and the relative lightness number with respect to those of the chief. The information exchange among the spacecraft, characterized by the communication topology, is represented by a weighted graph. Two typical cases, according to whether the communication graph is directed or undirected, are discussed. For each case, a distributed coordinated control law is designed in such a way that each deputy not only tracks the chief state, but also makes full use of information from its neighbors, thus increasing the redundancy and robustness of the formation system in case of failure among the communication links. Illustrative examples show the effectiveness of the proposed approach.

  19. Return to work after early part-time sick leave due to musculoskeletal disorders: a randomized controlled trial.

    Science.gov (United States)

    Viikari-Juntura, Eira; Kausto, Johanna; Shiri, Rahman; Kaila-Kangas, Leena; Takala, Esa-Pekka; Karppinen, Jaro; Miranda, Helena; Luukkonen, Ritva; Martimo, Kari-Pekka

    2012-03-01

    The purpose of this study was to assess the effects of early part-time sick leave on return to work (RTW) and sickness absence among patients with musculoskeletal disorders. A randomized controlled trial was conducted in six occupational health units of medium- and large-size enterprises. Patients aged 18-60 years with musculoskeletal disorders (N=63) unable to perform their regular work were randomly allocated to part- or full-time sick leave. In the former group, workload was reduced by restricting work time by about a half. Remaining work tasks were modified when necessary, as specified in a "fit note" from the physician. The main outcomes were time to return to regular work activities and sickness absence during 12-month follow-up. Time to RTW sustained for ≥4 weeks was shorter in the intervention group (median 12 versus 20 days, P=0.10). Hazard ratio of RTW adjusted for age was 1.60 [95% confidence interval (95% CI) 0.98-2.63] and 1.76 (95% CI 1.21-2.56) after further adjustment for pain interference with sleep and previous sickness absence at baseline. Total sickness absence during the 12-month follow-up was about 20% lower in the intervention than the control group. Compliance with the intervention was high with no discontinuations of part-time sick leave due to musculoskeletal reasons. Early part-time sick leave may provide a faster and more sustainable return to regular duties than full-time sick leave among patients with musculoskeletal disorders. This is the first study to show that work participation can be safely increased with early part-time sick leave.

  20. Microbiological Tests Performed During the Design of the International Space Station Environmental Control and Life Support Systems. Part 1, Bulk Phase. Part 1; Bulk Phase

    Science.gov (United States)

    Roman, Monsi C.; Mittelman, Marc W.

    2010-01-01

    The design and manufacturing of the main Environmental Control and Life Support Systems (ECLSS) for the United States segments of the International Space Station (ISS) was an involved process that started in the mid 1980s, with the assessment and testing of competing technologies that could be used to clean the air and recycle water. It culminated in 2009 with the delivery and successful activation of the Water Recovery System (WRS) water processor (WP). The ECLSS required the work of a team of engineers and scientist working together to develop systems that could clean and/or recycle human metabolic loads to maintain a clean atmosphere and provide the crew clean water. One of the main goals of the ECLSS is to minimize the time spent by the crew worrying about vital resources not available in the vacuum of space, which allows them to spend most of their time learning to live in a microgravity environment many miles from the comforts of Earth and working on science experiments. Microorganisms are a significant part of the human body as well as part of the environment that we live in. Therefore, the ISS ECLSS design had to take into account the effect microorganisms have on the quality of stored water and wastewater, as well as that of the air systems. Hardware performance issues impacted by the accumulation of biofilm and/or microbiologically influenced corrosion were also studied during the ECLSS development stages. Many of the tests that were performed had to take into account the unique aspects of a microgravity environment as well as the challenge of understanding how to design systems that could not be sterilized or maintained in a sterile state. This paper will summarize the work of several studies that were performed to assess the impacts and/or to minimize the effects of microorganisms in open, semi-closed and closed loop life support system. The biofilm and biodeterioration studies that were performed during the design and test periods will be presented in

  1. System for verifiable CT radiation dose optimization based on image quality. part II. process control system.

    Science.gov (United States)

    Larson, David B; Malarik, Remo J; Hall, Seth M; Podberesky, Daniel J

    2013-10-01

    To evaluate the effect of an automated computed tomography (CT) radiation dose optimization and process control system on the consistency of estimated image noise and size-specific dose estimates (SSDEs) of radiation in CT examinations of the chest, abdomen, and pelvis. This quality improvement project was determined not to constitute human subject research. An automated system was developed to analyze each examination immediately after completion, and to report individual axial-image-level and study-level summary data for patient size, image noise, and SSDE. The system acquired data for 4 months beginning October 1, 2011. Protocol changes were made by using parameters recommended by the prediction application, and 3 months of additional data were acquired. Preimplementation and postimplementation mean image noise and SSDE were compared by using unpaired t tests and F tests. Common-cause variation was differentiated from special-cause variation by using a statistical process control individual chart. A total of 817 CT examinations, 490 acquired before and 327 acquired after the initial protocol changes, were included in the study. Mean patient age and water-equivalent diameter were 12.0 years and 23.0 cm, respectively. The difference between actual and target noise increased from -1.4 to 0.3 HU (P process control chart identified several special causes of variation. Implementation of an automated CT radiation dose optimization system led to verifiable simultaneous decrease in image noise variation and SSDE. The automated nature of the system provides the opportunity for consistent CT radiation dose optimization on a broad scale. © RSNA, 2013.

  2. Key Residential Building Equipment Technologies for Control and Grid Support PART I (Residential)

    Energy Technology Data Exchange (ETDEWEB)

    Starke, Michael R [ORNL; Onar, Omer C [ORNL; DeVault, Robert C [ORNL

    2011-09-01

    Electrical energy consumption of the residential sector is a crucial area of research that has in the past primarily focused on increasing the efficiency of household devices such as water heaters, dishwashers, air conditioners, and clothes washer and dryer units. However, the focus of this research is shifting as objectives such as developing the smart grid and ensuring that the power system remains reliable come to the fore, along with the increasing need to reduce energy use and costs. Load research has started to focus on mechanisms to support the power system through demand reduction and/or reliability services. The power system relies on matching generation and load, and day-ahead and real-time energy markets capture most of this need. However, a separate set of grid services exist to address the discrepancies in load and generation arising from contingencies and operational mismatches, and to ensure that the transmission system is available for delivery of power from generation to load. Currently, these grid services are mostly provided by generation resources. The addition of renewable resources with their inherent variability can complicate the issue of power system reliability and lead to the increased need for grid services. Using load as a resource, through demand response programs, can fill the additional need for flexible resources and even reduce costly energy peaks. Loads have been shown to have response that is equal to or better than generation in some cases. Furthermore, price-incentivized demand response programs have been shown to reduce the peak energy requirements, thereby affecting the wholesale market efficiency and overall energy prices. The residential sector is not only the largest consumer of electrical energy in the United States, but also has the highest potential to provide demand reduction and power system support, as technological advancements in load control, sensor technologies, and communication are made. The prevailing loads

  3. Dissociative part-dependent resting-state activity in dissociative identity disorder: a controlled FMRI perfusion study.

    Science.gov (United States)

    Schlumpf, Yolanda R; Reinders, Antje A T S; Nijenhuis, Ellert R S; Luechinger, Roger; van Osch, Matthias J P; Jäncke, Lutz

    2014-01-01

    In accordance with the Theory of Structural Dissociation of the Personality (TSDP), studies of dissociative identity disorder (DID) have documented that two prototypical dissociative subsystems of the personality, the "Emotional Part" (EP) and the "Apparently Normal Part" (ANP), have different biopsychosocial reactions to supraliminal and subliminal trauma-related cues and that these reactions cannot be mimicked by fantasy prone healthy controls nor by actors. Arterial spin labeling perfusion MRI was used to test the hypotheses that ANP and EP in DID have different perfusion patterns in response to rest instructions, and that perfusion is different in actors who were instructed to simulate ANP and EP. In a follow-up study, regional cerebral blood flow of DID patients was compared with the activation pattern of healthy non-simulating controls. Compared to EP, ANP showed elevated perfusion in bilateral thalamus. Compared to ANP, EP had increased perfusion in the dorsomedial prefrontal cortex, primary somatosensory cortex, and motor-related areas. Perfusion patterns for simulated ANP and EP were different. Fitting their reported role-play strategies, the actors activated brain structures involved in visual mental imagery and empathizing feelings. The follow-up study demonstrated elevated perfusion in the left temporal lobe in DID patients, whereas non-simulating healthy controls had increased activity in areas which mediate the mental construction of past and future episodic events. DID involves dissociative part-dependent resting-state differences. Compared to ANP, EP activated brain structures involved in self-referencing and sensorimotor actions more. Actors had different perfusion patterns compared to genuine ANP and EP. Comparisons of neural activity for individuals with DID and non-DID simulating controls suggest that the resting-state features of ANP and EP in DID are not due to imagination. The findings are consistent with TSDP and inconsistent with the idea

  4. Dissociative part-dependent resting-state activity in dissociative identity disorder: a controlled FMRI perfusion study.

    Directory of Open Access Journals (Sweden)

    Yolanda R Schlumpf

    Full Text Available In accordance with the Theory of Structural Dissociation of the Personality (TSDP, studies of dissociative identity disorder (DID have documented that two prototypical dissociative subsystems of the personality, the "Emotional Part" (EP and the "Apparently Normal Part" (ANP, have different biopsychosocial reactions to supraliminal and subliminal trauma-related cues and that these reactions cannot be mimicked by fantasy prone healthy controls nor by actors.Arterial spin labeling perfusion MRI was used to test the hypotheses that ANP and EP in DID have different perfusion patterns in response to rest instructions, and that perfusion is different in actors who were instructed to simulate ANP and EP. In a follow-up study, regional cerebral blood flow of DID patients was compared with the activation pattern of healthy non-simulating controls.Compared to EP, ANP showed elevated perfusion in bilateral thalamus. Compared to ANP, EP had increased perfusion in the dorsomedial prefrontal cortex, primary somatosensory cortex, and motor-related areas. Perfusion patterns for simulated ANP and EP were different. Fitting their reported role-play strategies, the actors activated brain structures involved in visual mental imagery and empathizing feelings. The follow-up study demonstrated elevated perfusion in the left temporal lobe in DID patients, whereas non-simulating healthy controls had increased activity in areas which mediate the mental construction of past and future episodic events.DID involves dissociative part-dependent resting-state differences. Compared to ANP, EP activated brain structures involved in self-referencing and sensorimotor actions more. Actors had different perfusion patterns compared to genuine ANP and EP. Comparisons of neural activity for individuals with DID and non-DID simulating controls suggest that the resting-state features of ANP and EP in DID are not due to imagination. The findings are consistent with TSDP and inconsistent

  5. Hypothalamic stem cells control ageing speed partly through exosomal miRNAs.

    Science.gov (United States)

    Zhang, Yalin; Kim, Min Soo; Jia, Baosen; Yan, Jingqi; Zuniga-Hertz, Juan Pablo; Han, Cheng; Cai, Dongsheng

    2017-08-03

    It has been proposed that the hypothalamus helps to control ageing, but the mechanisms responsible remain unclear. Here we develop several mouse models in which hypothalamic stem/progenitor cells that co-express Sox2 and Bmi1 are ablated, as we observed that ageing in mice started with a substantial loss of these hypothalamic cells. Each mouse model consistently displayed acceleration of ageing-like physiological changes or a shortened lifespan. Conversely, ageing retardation and lifespan extension were achieved in mid-aged mice that were locally implanted with healthy hypothalamic stem/progenitor cells that had been genetically engineered to survive in the ageing-related hypothalamic inflammatory microenvironment. Mechanistically, hypothalamic stem/progenitor cells contributed greatly to exosomal microRNAs (miRNAs) in the cerebrospinal fluid, and these exosomal miRNAs declined during ageing, whereas central treatment with healthy hypothalamic stem/progenitor cell-secreted exosomes led to the slowing of ageing. In conclusion, ageing speed is substantially controlled by hypothalamic stem cells, partially through the release of exosomal miRNAs.

  6. Installation and working methods of a testing laboratory to establish a private control at the concrete plant (part 1

    Directory of Open Access Journals (Sweden)

    Haarmann, F.

    1973-03-01

    Full Text Available Not availableEl ''Control de Calidad'' puede considerarse tan importante, desde un punto de vista práctico, que unas instalaciones adecuadas para el control, tanto de la producción como de los productos acabados, representan una seguridad en la calidad de los productos y en el rendimiento de la empresa. Con la ayuda de algunos ejemplos, el presente trabajo muestra las posibilidades existentes para mantener la calidad del producto a un elevado nivel, empleando para ello instalaciones de control de calidad, aumentando, además, el rendimiento y reduciendo los costos innecesarios. En la segunda parte de este trabajo se describen ocho centros de control de calidad de grandes y pequeñas dimensiones y de acuerdo con la disposición de la figura 1. Seguidamente se hacen algunas observaciones críticas respecto a la adquisición de instalaciones para realizar un adecuado control. En un apéndice del trabajo se representan esquemáticamente unas instalaciones para el control de áridos, del hormigón fresco y del hormigón endurecido.

  7. Quality control of outpatient imaging examinations in North Rhine-Westphalia. Part II

    International Nuclear Information System (INIS)

    Krug, B.; Boettge, M.; Zaehringer, M.; Reinecke, T.; Coburger, S.; Harnischmacher, U.; Luengen, M.; Lauterbach, K.W.; Lehmacher, W.; Lackner, K.

    2003-01-01

    Purpose: In the state of North Rhine-Westphalia (NRW), Germany, a survey was conducted on radiologic examinations ordered by general practitioners (GPs). Part II of this study aims to determine the quality of the process and outcome. The reference standard is the assessment of both radiologists and physicians without board certification in radiology working at a university hospital and in outpatient facilities. Materials and Methods: All GPs in NRW were asked to cooperate. Participating GPs filled out a questionnaire for each patient. The patients recorded the symptoms prompting the imaging examinations. The radiologists or other physicians performing the examinations were asked to provide the images and written reports and to complete a questionnaire. A file was created for each of the 394 patients with image documentation of at least one examination. Each file, which included medical history, physical findings, imaging documentation and written report, was sequentially forwarded to a board-certified radiologist and to a physician without board certification in radiology working in a university hospital and in an outpatient facility. All physicians were requested to complete a structured questionnaire for each file. Results: The referral diagnoses were rated as medically plausible in 81%, the indications for imaging found correct in 76%, the examination techniques considered appropriate in 69%, the clinical question answered in 63%, the interpretation judged medically correct in 50% and all incidental findings documented in 49%. In retrospect, 32% of the examinations were judged superfluous. The sequence of multiple examinations performed on a particular patient was rated as appropriate in 51%. The interpretation revealed specialty-related differences. The plausibility of the referral diagnoses had a significant impact on the appropriateness of subsequent diagnostic investigations. Marked deficits showed sonography, performance by non-radiologists, self

  8. Quality control of outpatient imaging examinations in North Rhine-Westphalia. Part 1

    International Nuclear Information System (INIS)

    Krug, B.; Boettge, M.; Reinecke, T.; Zaehringer, M.; Smekal, U. v.; Winnekendonk, G.; Lackner, K.; Coburger, S.; Lehmacher, W.; Harnischmacher, U.; Luengen, M.; Lauterbach, K.W.

    2003-01-01

    Purpose: In the state of North-Rhine Westphalia (NRW), Germany, a survey was conducted on radiologic examinations ordered by general practitioners (GPs). Part I of this study aims to collect characteristic epidemiological data and to assess structural quality. Materials and methods: All GPs in NRW were asked to cooperate. Participating GPs filled out a questionnaire for each patient. The patients recorded the symptoms prompting the imaging examinations. The radiologists or other physicians performing the examinations were asked to provide the images and written reports and to complete a questionnaire. Two university radiologists documented the pertinent test data from the submitted images and written records. Independently of each other, five university radiologists anonymously reviewed the image quality of each examination using structured questionnaires. Results: A total of 920 patients gave their informed consent and participated. Questionnaires from 787 patients, 852 GPs and 611 radiologists or other interpreting physicians as well as the complete survey data from 530 examinations were available. Of 1503 examinations, conventional radiography made up 52%, sonography 17%, computed tomography (CT) 13% and magnetic resonance imaging (MRI) 5%. Most indications involved the musculoskeletal (37%) and respiratory systems (24%). Physicians without board certification in radiology interpreted 1% of the CT examinations, 26% of the radiographic examinations and 71% of the sonographic examinations. Of the 174 self-referrals, 1% involved CT, 33% conventional radiography and 66% sonography. Written reports were available for 95% of all 469 examinations performed by radiologists and 74% of all 127 examinations conducted by non-radiologists. Only 44% of the 23 sonographic studies were self-referrals by the patient's GP. On average, the radiographic techniques were acceptable in terms of diagnostic information and radiation hygiene. Conventional radiographs were better exposed

  9. Dose level investigation in tests with gastrointestinal fluoroscopy as a part of a quality control program

    International Nuclear Information System (INIS)

    Canevaro, L.V.; Borges, J.C.; Kocj, H.A.

    1995-01-01

    The Radiation Protection and Dosimetry Institute of the National Nuclear Energy Commission (IRD/CNEN) Brazilian and the Radiodiagnostic Service of the Rio de Janeiro Federal University Hospital, (Brazil), have been engaged in the development of quality control programs applied to radiodiagnostics, one of them concerning gastrointestinal fluoroscopy. Since fluoroscopic examinations normally deals with high doses, they represent an important fraction of public exposure. They deserve special attention and risks to patients should be considered individually, not only as a population statistics. This work describes steps followed and results obtained in the estimation of doses for patients and physicians. Examinations investigated were esofagography, gastroduodenal seriography and colon with double contrast media, using conventional equipment with fluorescent screens, carried on by physicians engaged in the first year of medical residence. (author). 14 refs., 2 tabs

  10. [Helsinki declaration on patient safety in anaesthesiology -part 10: infection control/hygiene].

    Science.gov (United States)

    Kerwat, Klaus; Wulf, Hinnerk

    2013-11-01

    There is a plethora of laws, regulations, guidelines and recommendations relating to infection control and hygiene. Major issues are the prevention of nosocomial infections, staff protection and environmental protection. Of the highest relevance are the infection control law [Infektionsschutzgesetz (IfSG)], the hygiene regulations of the German federal states [Hygieneverordnungen der Bundesländer], the German technical rules for biological materials [Technische Regel Biologische Arbeitsstoffe 250 (TRBA 250)] - biological materials in health-care and welfare work [Biologische Arbeitsstoffe im Gesundheitswesen und in der Wohlfahrtspflege], the guidelines for hospital hygiene and prevention of infection of the commission for hospital hygiene and prevention of infection of the Robert-Koch Institute [Richtlinie für Krankenhaushygiene und Infektionsprävention von der Kommission für Krankenhaushygiene und Infektionsprävention (KRINKO) beim Robert Koch-Institut], the recommendations of the commission on anti-infectives, resistance and therapy of the Robert-Koch Institute [Empfehlungen der Kommission Antiinfektiva, Resistenz und Therapie (ART) beim Robert Koch-Institut]. Of subordinate importance are, e.g., the recommendations of the German Society for Anesthesiology and Intensive Medicine (DGAI). It is practically impossible for an anesthesiologist working in a hospital to have knowledge of all laws, regulations, guidelines and recommendations. And this is also not reasonable. Thus it is necessary to distinguish the relevant from the irrelevant. Checklists can be useful here. The most important and effective individual action in hospital hygiene is and remains hand hygiene as is propagated in the action "clean hands", irrespective of all laws, regulations, guidelines and recommendations. © Georg Thieme Verlag Stuttgart · New York.

  11. Role of neonicotinyl insecticides in Washington apple integrated pest management. Part I. Control of lepidopteran pests

    Science.gov (United States)

    Brunner, J. F.; Beers, E. H.; Dunley, J. E.; Doerr, M.; Granger, K.

    2005-01-01

    Three neonicotinyl insecticides, acetamiprid, thiacloprid and clothianidin, were evaluated for their impact on four species of lepidopteran pests of apple in Washington, the codling moth, Cydia pomonella (L.), the Pandemis leafroller, Pandemis pyrusana Kearfott, and the obliquebanded leafroller, Choristoneura rosaceana (Harris), and Lacanobia subjuncta (Grote & Robinson). None of the neonicotinyl insecticides demonstrated sufficient activity against P. pyrusana, C. rosaceana, or L. subjuncta to warrant field trials. Conversely, all had some activity against one or more stages of C. pomonella. Acetamiprid was highly toxic to larvae in laboratory bioassays, and had relatively long activity of field-aged residues (21 days). It also showed some toxicity to C. pomonella eggs (via topical exposure) and adults. Acetamiprid provided the highest level of fruit protection from C. pomonella attack in field trials conducted over five years in experimental orchards with extremely high codling moth pressure. Thiacloprid performed similarly in bioassays, but fruit protection in field trials was slightly lower than acetamiprid. Clothianidin showed moderate to high toxicity in bioassays, depending on the C. pomonella stage tested, but poor fruit protection from attack in field trials. None of the neonicotinyl insecticides were as toxic to larvae or effective in protecting fruit as the current standard organophosphate insecticide used for C. pomonella control, azinphosmethyl. However, both acetamiprid and thiacloprid should provide acceptable levels of C. pomonella control in commercial orchards where densities are much lower than in the experimental orchards used for our trials. The advantages and disadvantages of the neonicotinyl insecticides as replacements for the organophosphate insecticides and their role in a pest management system for Washington apple orchards are discussed. Abbreviation: MFR Maximum field rate PMID:16341246

  12. Health-related effects of early part-time sick leave due to musculoskeletal disorders: a randomized controlled trial.

    Science.gov (United States)

    Shiri, Rahman; Kausto, Johanna; Martimo, Kari-Pekka; Kaila-Kangas, Leena; Takala, Esa-Pekka; Viikari-Juntura, Eira

    2013-01-01

    Previously we reported that early part-time sick leave enhances return to work (RTW) among employees with musculoskeletal disorders (MSD). This paper assesses the health-related effects of this intervention. Patients aged 18-60 years who were unable to perform their regular work due to MSD were randomized to part- or full-time sick leave groups. In the former, workload was reduced by halving working time. Using validated questionnaires, we assessed pain intensity and interference with work and sleep, region-specific disability due to MSD, self-rated general health, health-related quality of life (measured via EuroQol), productivity loss, depression, and sleep disturbance at baseline, 1, 3, 8, 12, and 52 weeks. We analyzed the repeated measures data (171-356 observations) with the generalized estimating equation approach. The intervention (part-time sick leave) and control (full-time sick leave) groups did not differ with regard to pain intensity, pain interference with work and sleep, region-specific disability, productivity loss, depression, or sleep disturbance. The intervention group reported better self-rated general health (adjusted P=0.07) and health-related quality of life (adjusted P=0.02) than the control group. In subgroup analyses, the intervention was more effective among the patients whose current problem began occurring part-time sick leave did not exacerbate pain-related symptoms and functional disability, but improved self-rated general health and health-related quality of life in the early stage of work disability due to MSD.

  13. Educating the Educator: Use of Advanced Bleeding Control Mechanisms in Athletic Training: A Shift in the Thought Process of Prehospital Care. Part 2: Hemostatic Agents

    Science.gov (United States)

    Payne, Ellen K.; Berry, David C.; Seitz, S. Robert

    2014-01-01

    In Part 1 of this series [see: EJ1044392], the concepts of hemorrhaging, shock, and controlling bleeding as they relate to athletic training and prehospital emergency care along with the use of tourniquets were presented for athletic training educators (ATEs) to teach the skill in the classroom. This article, Part 2 of advanced bleeding control,…

  14. 15 CFR Supplement No. 2 to Part 742 - Anti-Terrorism Controls: North Korea, Syria and Sudan Contract Sanctity Dates and Related Policies

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Anti-Terrorism Controls: North Korea... CONTROLS Pt. 742, Supp. 2 Supplement No. 2 to Part 742—Anti-Terrorism Controls: North Korea, Syria and... terrorism under section 6(j) of the Export Administration Act (EAA). (b) Items controlled under EAA sections...

  15. Optimal control of building storage systems using both ice storage and thermal mass – Part I: Simulation environment

    International Nuclear Information System (INIS)

    Hajiah, Ali; Krarti, Moncef

    2012-01-01

    Highlights: ► A simulation environment is described to account for both passive and active thermal energy storage (TES) systems. ► Laboratory testing results have been used to validate the predictions from the simulation environment. ► Optimal control strategies for TES systems have been developed as part of the simulation environment. - Abstract: This paper presents a simulation environment that can evaluate the benefits of using simultaneously building thermal capacitance and ice storage system to reduce total operating costs including energy and demand charges while maintaining adequate occupant comfort conditions within commercial buildings. The building thermal storage is controlled through pre-cooling strategies by setting space indoor air temperatures. The ice storage system is controlled by charging the ice tank and operating the chiller during low electrical charge periods and melting the ice during on-peak periods. Optimal controls for both building thermal storage and ice storage are developed to minimize energy charges, demand charges, or combined energy and demand charges. The results obtained from the simulation environment are validated using laboratory testing for an optimal controller.

  16. Reynolds stress analysis of EMHD-controlled wall turbulence. Part I. Streamwise forcing

    International Nuclear Information System (INIS)

    Crawford, C.H.; Karniadakis, G.E.

    1997-01-01

    In this work we investigate numerically turbulent flow of low electrical conductivity fluid subject to electro-magnetic (EMHD) forcing. The configuration is similar to the one considered in the experimental work of Henoch and Stace [Phys. Fluids 7, 1371 (1995)] but in a channel geometry. The lower wall of the channel is covered with alternating streamwise electrodes and magnets to create a Lorentz force in the positive streamwise direction. Two cases are considered in detail corresponding to interaction parameter values of 0.4 (case 1) and 0.1 (case 2). The effect of switching off and on the electrodes is also studied for the two cases. At the Reynolds number considered (Re τ ∼200), a drag increase was obtained for all cases, in agreement with the experiments of Henoch and Stace. A Reynolds stress analysis was performed based on a new decomposition of the gradients normal to the wall of the Reynolds stress -u'v'. It was found that the vortex stretching term w'w 2 ' and the spanwise variation of the stress component u'w' are responsible for the drag increase. More specifically, the term ∂(u'w')/∂x 3 is associated with secondary vortical motions in the near-wall and becomes large and positive for large shear stress in regions where fluid is moving toward the wall. In contrast, negative values are associated with regions of lower shear where fluid is being lifted away from the wall. Unlike the unperturbed flow, in the controlled flow high speed near-wall streamwise jets are present (case 1) even in the time-averaged fields. Other changes in turbulence structure are quantified using streak spacing, vortex lines, vorticity quadrant analysis, and plots of the rms value of the vorticity angle. copyright 1997 American Institute of Physics

  17. The projected effectiveness of Clostridium difficile vaccination as part of an integrated infection control strategy.

    Science.gov (United States)

    van Kleef, Esther; Deeny, Sarah R; Jit, Mark; Cookson, Barry; Goldenberg, Simon D; Edmunds, W John; Robotham, Julie V

    2016-11-04

    Early clinical trials of a Clostridium difficile toxoid vaccine show efficacy in preventing C. difficile infection (CDI). The optimal patient group to target for vaccination programmes remains unexplored. This study performed a model-based evaluation of the effectiveness of different CDI vaccination strategies, within the context of existing infection prevention and control strategies such as antimicrobial stewardship. An individual-based transmission model of CDI in a high-risk hospital setting was developed. The model incorporated data on patient movements between the hospital, and catchment populations from the community and long-term care facilities (LTCF), using English national and local level data for model-parameterisation. We evaluated vaccination of: (1) discharged patients who had an CDI-occurrence in the ward; (2) LTCF-residents; (3) Planned elective surgical admissions and (4) All three strategies combined. Without vaccination, 10.9 [Interquartile range: 10.0-11.8] patients per 1000 ward admissions developed CDI, of which 31% were ward-acquired. Immunising all three patient groups resulted in a 43% [42-44], reduction of ward-onset CDI on average. Among the strategies restricting vaccination to one target group, vaccinating elective surgical patients proved most effective (35% [34-36] reduction), but least efficient, requiring 146 [133-162] courses to prevent one ICU-onset case. Immunising LTCF residents was most efficient, requiring just 13 [11-16] courses to prevent one case, but considering this only comprised a small group of our hospital population, it only reduced ICU-onset CDI by 9% [8-11]. Vaccination proved most efficient when ward-based transmission rates and antimicrobial consumption were high. Strategy success depends on the interaction between hospital and catchment populations, and importantly, consideration of importations of CDI from outside the hospital which we found to substantially impact hospital dynamics. Vaccination may be most

  18. Erosion control works and the intensity of soil erosion in the upper part of the river Toplica drainage basin

    International Nuclear Information System (INIS)

    Kostadinov, S; Dragovic, N; Zlatic, M; Todosijevic, M

    2008-01-01

    Aiming at the protection of the future storage 'Selova' against erosion and sediment, and also to protect the settlements and roads in the drainage basin against torrential floods, erosion control works in the upper part of the river Toplica basin, upstream of the storage 'Selova', started in 1947. The works included building-technical works (check dams) and biological works (afforestation and grassing of bare lands and other erosion risk areas). Within the period 1947-2006, the following erosion control works were executed: afforestation of bare lands on the slopes 2,257.00 ha, grassing of bare lands 1,520.00 ha, and altogether 54 dams were constructed in the river Toplica tributaries. This caused the decrease of sediment transport in the main flow of the river Toplica. This paper, based on the field research conducted in two time periods: 1988 and in the period 2004-2007, presents the state of erosion in the basin before erosion control works; type and scope of erosion control works and their effect on the intensity of erosion in the river Toplica basin upstream of the future storage 'Selova'.

  19. Controlling the Release of Indomethacin from Glass Solutions Layered with a Rate Controlling Membrane Using Fluid-Bed Processing. Part 1: Surface and Cross-Sectional Chemical Analysis.

    Science.gov (United States)

    Dereymaker, Aswin; Scurr, David J; Steer, Elisabeth D; Roberts, Clive J; Van den Mooter, Guy

    2017-04-03

    Fluid bed coating has been shown to be a suitable manufacturing technique to formulate poorly soluble drugs in glass solutions. Layering inert carriers with a drug-polymer mixture enables these beads to be immediately filled into capsules, thus avoiding additional, potentially destabilizing, downstream processing. In this study, fluid bed coating is proposed for the production of controlled release dosage forms of glass solutions by applying a second, rate controlling membrane on top of the glass solution. Adding a second coating layer adds to the physical and chemical complexity of the drug delivery system, so a thorough understanding of the physical structure and phase behavior of the different coating layers is needed. This study aimed to investigate the surface and cross-sectional characteristics (employing scanning electron microscopy (SEM) and time of flight secondary ion mass spectrometry (ToF-SIMS)) of an indomethacin-polyvinylpyrrolidone (PVP) glass solution, top-coated with a release rate controlling membrane consisting of either ethyl cellulose or Eudragit RL. The implications of the addition of a pore former (PVP) and the coating medium (ethanol or water) were also considered. In addition, polymer miscibility and the phase analysis of the underlying glass solution were investigated. Significant differences in surface and cross-sectional topography of the different rate controlling membranes or the way they are applied (solution vs dispersion) were observed. These observations can be linked to the polymer miscibility differences. The presence of PVP was observed in all rate controlling membranes, even if it is not part of the coating solution. This could be attributed to residual powder presence in the coating chamber. The distribution of PVP among the sample surfaces depends on the concentration and the rate controlling polymer used. Differences can again be linked to polymer miscibility. Finally, it was shown that the underlying glass solution layer

  20. Dynamic Stability of Cylindrical Shells under Moving Loads by Applying Advanced Controlling Techniques—Part II: Using Piezo-Stack Control

    Directory of Open Access Journals (Sweden)

    Khaled M. Saadeldin Eldalil

    2009-01-01

    Full Text Available The load acting on the actively controlled cylindrical shell under a transient pressure pulse propelling a moving mass (gun case has been experimentally studied. The concept of using piezoelectric stack and stiffener combination is utilized for damping the tube wall radial and circumferential deforming vibrations, in the correct meeting location timing of the moving mass. The experiment was carried out by using the same stiffened shell tube of the experimental 14 mm gun tube facility which is used in part 1. Using single and double stacks is tried at two pressure levels of low-speed modes, which have response frequencies adapted with the used piezoelectric stacks characteristics. The maximum active damping ratio is occurred at high-pressure level. The radial circumferential strains are measured by using high-frequency strain gage system in phase with laser beam detection system similar to which used in part 1. Time resolved strain measurements of the wall response were obtained, and both precursor and transverse hoop strains have been resolved. A complete comparison had been made between the effect of active controlled and stepped structure cases, which indicate a significant attenuation ratio especially at higher operating pressures.

  1. Modeling and Control of the Springback Effect in the Bottom Sheet Metal Part One-Stage Drawing Process

    Directory of Open Access Journals (Sweden)

    A. S. Chumadin

    2014-01-01

    Full Text Available The main objective of this study is to reduce a manufacturing complexity of bottom sheet metal parts by improving the accuracy of parts produced. This study is aimed at using the finite element analysis to prove assumptions that there is a transition frontier between the processes of forming and drawing, and there are capabilities to control springback effect by moving this frontier positions.The process, the stress-strain state of which in the dome corresponds to the process of forming parts, and in the flange area to the drawing process, was considered to be a formingdrawing process.Based on previous studies, techniques to reduce a springback have been proposed which enable us to use three calculation schemes for the process simulation:The frontier transition position control between the processes of forming and drawing by changing the contact pressure on the flange by varying the frictions coefficients on the die and binder surfaces;Springback manage through the additional tensile forces in the flange area of the blank;Springback manage through the technological insert at the first process stage.For ease of comparison with previous research results the same geometric parameters and material properties of the items are used in the simulation.The springback analysis used a finite element method in the AutoFormTM incremental module with automatically mashed and standard tolerance computation properties. The blank, binder, punch, and die were then imported to the module by CATIATM interface in .iges format.The calculation has shown that the optimal value for the least thinning and springback parts are available for the second scheme whereby ring punch makes additional tension in the flange area (from 1.09 to 0.35 mm with thinning from 0.80 to 0.73 mm. The use of flange retention of sheet blank at the expense of variable frictional forces showed the springback value reduction by 4 times (from 1.09 to 0.27 mm. However thinning was 16% (from 0.80 to

  2. Study of Power Converter Topologies with Energy Recovery and grid power flow control Part C: a review of alternative structures

    CERN Document Server

    Papastergiou, Konstantinos; Maestri, Sebastian; Retegui, Rogelio Garcia; Uicich, Gustavo; Benedetti, Mario; Carrica, Daniel

    2017-01-01

    In the framework of a Transfer line (TT2) Consolidation Programme, a number of studies on Energy cycling have been commissioned. Part of this work involves the study of different power electronic system topologies for magnet energy recovery. The key objective of the study is to find topologies and control strategies that result in the control of the peak power required from the power network as well as to recover the magnet energy into capacitor banks with controlled voltage fluctuation. In previous reports, the use of a boost front-end converter and two-quadrant (2Q) converter supplying DC link of a four-quadrant magnet supply were analyzed. From this analysis, different features and figures of merit were considered in order to compare the structures, which allowed to define some considerations that a proper topology should have. Consequently, these considerations were used to define some novel topologies. The previous topologies are briefly summarized, as a starting point to develop some novel struc...

  3. DEVELOPMENT OF THE AUTOMATED ROAD TRAFFIC CONTROL SYSTEMS IN MINSK AS PART OF THE INTELLECTUAL CITY TRANSPORT SYSTEM

    Directory of Open Access Journals (Sweden)

    D. V. Kapskiy

    2017-01-01

    Full Text Available The results of the analysis of Minsk city transport system performance. It is shown that the growth of car ownership has caused a number of problems, among which the low-speed communication, bad driving modes, the presence of elevated levels of congestion and accidents. The corresponding figures for accidents in Minsk and some cities in the world that allow to characterize the transport system of the city of Minsk, as satisfactory. To improve the system and improve the quality of traffic necessary to create intelligent transport system of the city of Minsk. Intelligent Transportation System, being a global trend, enables dramatically improve road quality. Automated traffic control system and other subsystems as part of the Intelligent Transportation Systems are tools for achieving the goals for improving the safety and comfort of road users. It is proposed as a base for its creation to choose an automated traffic control system, which has a corresponding functional, structural, organizational and institutional provisions for its development. The technological requirements for the functioning of an integrated system, which relate to the level of efficiency, including accidents on sections of the road network included in the created system. Modernization of the automated traffic control system and its transformation into an intelligent transport system will reduce emergency, economic and environmental, and social costs in the road traffic is not less than 15 % from their current level, despite the steady growth of car ownership in the city. It is planned to create a complete intelligent transportation system.

  4. The Global Streamflow Indices and Metadata Archive (GSIM – Part 2: Quality control, time-series indices and homogeneity assessment

    Directory of Open Access Journals (Sweden)

    L. Gudmundsson

    2018-04-01

    Full Text Available This is Part 2 of a two-paper series presenting the Global Streamflow Indices and Metadata Archive (GSIM, which is a collection of daily streamflow observations at more than 30 000 stations around the world. While Part 1 (Do et al., 2018a describes the data collection process as well as the generation of auxiliary catchment data (e.g. catchment boundary, land cover, mean climate, Part 2 introduces a set of quality controlled time-series indices representing (i the water balance, (ii the seasonal cycle, (iii low flows and (iv floods. To this end we first consider the quality of individual daily records using a combination of quality flags from data providers and automated screening methods. Subsequently, streamflow time-series indices are computed for yearly, seasonal and monthly resolution. The paper provides a generalized assessment of the homogeneity of all generated streamflow time-series indices, which can be used to select time series that are suitable for a specific task. The newly generated global set of streamflow time-series indices is made freely available with an digital object identifier at https://doi.pangaea.de/10.1594/PANGAEA.887470 and is expected to foster global freshwater research, by acting as a ground truth for model validation or as a basis for assessing the role of human impacts on the terrestrial water cycle. It is hoped that a renewed interest in streamflow data at the global scale will foster efforts in the systematic assessment of data quality and provide momentum to overcome administrative barriers that lead to inconsistencies in global collections of relevant hydrological observations.

  5. The Global Streamflow Indices and Metadata Archive (GSIM) - Part 2: Quality control, time-series indices and homogeneity assessment

    Science.gov (United States)

    Gudmundsson, Lukas; Do, Hong Xuan; Leonard, Michael; Westra, Seth

    2018-04-01

    This is Part 2 of a two-paper series presenting the Global Streamflow Indices and Metadata Archive (GSIM), which is a collection of daily streamflow observations at more than 30 000 stations around the world. While Part 1 (Do et al., 2018a) describes the data collection process as well as the generation of auxiliary catchment data (e.g. catchment boundary, land cover, mean climate), Part 2 introduces a set of quality controlled time-series indices representing (i) the water balance, (ii) the seasonal cycle, (iii) low flows and (iv) floods. To this end we first consider the quality of individual daily records using a combination of quality flags from data providers and automated screening methods. Subsequently, streamflow time-series indices are computed for yearly, seasonal and monthly resolution. The paper provides a generalized assessment of the homogeneity of all generated streamflow time-series indices, which can be used to select time series that are suitable for a specific task. The newly generated global set of streamflow time-series indices is made freely available with an digital object identifier at https://doi.pangaea.de/10.1594/PANGAEA.887470" target="_blank">https://doi.pangaea.de/10.1594/PANGAEA.887470 and is expected to foster global freshwater research, by acting as a ground truth for model validation or as a basis for assessing the role of human impacts on the terrestrial water cycle. It is hoped that a renewed interest in streamflow data at the global scale will foster efforts in the systematic assessment of data quality and provide momentum to overcome administrative barriers that lead to inconsistencies in global collections of relevant hydrological observations.

  6. U3Si2 behavior in H2O environments: Part II, pressurized water with controlled redox chemistry

    Science.gov (United States)

    Nelson, A. T.; Migdisov, A.; Wood, E. Sooby; Grote, C. J.

    2018-03-01

    Recent interest in U3Si2 as an advanced light water reactor fuel has driven assessment of numerous properties, but characterization of its response to H2O environments is sparse in available literature. The behavior of U3Si2 in H2O containing atmospheres is investigated and presented in a two-part series of articles. This work examines the behavior of U3Si2 following exposure to pressurized H2O at temperatures from 300 to 350 °C. Testing was performed using two autoclave configurations and multiple redox conditions. Use of solid state buffers to attain a controlled water chemistry is also presented as a means to test actinide-bearing systems. Buffers were used to vary the hydrogen concentration between 1 and 30 parts per million H2. Testing included UN, U3Si5, and UO2. Both UN and U3Si5 were found to rapidly pulverize in less than 50 h at 300 °C. Uranium dioxide was included as a control for the autoclave system, and was found to be minimally impacted by exposure to pressurized water at the conditions tested for extended time periods. Testing of U3Si2 at 300 °C found reasonable stability through 30 days in 1-5 ppm H2. However, pulverization was observed following 35 days. The redox condition of testing strongly affected pulverization. Characterization of the resulting microstructures suggests that the mechanism responsible for pulverization under more strongly reducing conditions differs from that previously identified. Hydride formation is hypothesized to drive this transition. Testing performed at 350 °C resulted in rapid pulverization of U3Si2 in under 50 h.

  7. Radiation protection at the RA reactor in 1984, Part II c Radioactivity control in the environment of the RA reactor, Meteorology measurements

    International Nuclear Information System (INIS)

    Grsic, Z.; Zaric, M.; Nikolic, R.; Stevanovic, M.

    1984-01-01

    During 1984, meteorology measurements were continued as a part of the environmental control of the Vinca Institute. This report covers the period from December 1983 - November 1984. Part of the meteorology measurements and data analysis is adapted to the needs of the Institute, i.e. RA reactor and some Laboratories. The objective of these activities is forming the data base for solving everyday and special problems related to control, protection and safety of Institute environment

  8. Importance of the inverted control in measuring holistic face processing with the composite effect and part-whole effect.

    Directory of Open Access Journals (Sweden)

    Elinor eMcKone

    2013-02-01

    Full Text Available Holistic coding for faces is shown in several illusions that demonstrate integration of the percept across the entire face. The illusions occur upright but, crucially, not inverted. Converting the illusions into experimental tasks that measure their strength – and thus index degree of holistic coding – is often considered straightforward yet in fact relies on a hidden assumption, namely that there is no contribution to the experimental measure from secondary cognitive factors. For the composite effect, a relevant secondary factor is size of the "spotlight" of visuospatial attention. The composite task assumes this spotlight can be easily restricted to the target half (e.g., top half of the compound face stimulus. Yet, if this assumption were not true then a large spotlight, in the absence of holistic perception, could produce a false composite effect, present even for inverted faces and contributing partially to the score for upright faces. We review evidence that various factors can influence spotlight size: race/culture (Asians often prefer a more global distribution of attention than Caucasians; sex (females can be more global; appearance of the join or gap between face halves; and location of the eyes, which typically attract attention. Results from 5 experiments then show inverted faces can sometimes produce large false composite effects, and imply that whether this happens or not depends on complex interactions between causal factors. We also report, for both identity and expression, that only top-half-face targets (containing eyes produce valid composite measures. A sixth experiment demonstrates an example of a false inverted part-whole effect, where encoding-specificity is the secondary cognitive factor. We conclude the inverted face control should be tested in all composite and part-whole studies, and an effect for upright faces should be interpreted as a pure measure of holistic processing only when the experimental design produces

  9. Part-body hyperthermia with a radiofrequency multiantenna applicator under online control in 1,5 T MR-tomograph

    International Nuclear Information System (INIS)

    Wust, P.; Gellermann, J.; Faehling, H.; Wlodarczyk, W.; Felix, R.; Seebass, M.; Turner, P.; Nadobny, J.; Rau, B.; Hildebrandt, B.; Schlag, P.M.; Oppelt, A.

    2004-01-01

    Objective of this study is the integration of a multiantenna applicator for part-body hyperthermia (BSD 2000/3D) in a 1.5 T MR-tomograph (Siemens Magnetom Symphony) in order to perform noninvasive MR monitoring in real time to increase safety and effectiveness of heat treatments. The positioning unit is mechanically coupled to the MR gantry from the back side and the body coil is utilised for imaging. For that purpose, the hyperthermia antenna system (100 MHz, 1.500 W) and the MR receiver(63.9 MHs) have to be decoupled in terms of high frequency (filter) and electromagnetically (emc). The processing of MR data sets is performed in a hyperthermia planning system. A simultaneous operation of radiofrequency hyperthermia and MR system is possible at clinically relevant power levels. MR imaging is used for tumor diagnostics (standard spin echo sequences), for hyperthermia planning (T1-weighted gradient echo sequences in equal- and opposed-phase techniques), and for temperature measurements according to the proton resonance frequency method (PRF method, phase evaluation registration using a gradient echo sequence with long echo time). In 33 patients with advanced pelvic and abdominal tumors we performed 150 heat sessions under MR monitoring. For 70% of these patients a visualisation of temperature sensitive data during treatment was possible. The evaluated difference images represent a superposition of real temperature increase and a (temperature-induced) perfusion elevation. The hybrid approach renders development of part body hyperthermia possible as an MR-controlled intervention in radiology. (orig.) [de

  10. Superselective Thalamotomy in the Most Lateral Part of the Ventralis Intermedius Nucleus for Controlling Essential and Parkinsonian Tremor.

    Science.gov (United States)

    Hirato, Masafumi; Miyagishima, Takaaki; Takahashi, Akio; Yoshimoto, Yuhei

    2018-01-01

    The minimum and essential thalamic areas for reducing tremor were investigated in cases treated by superselective thalamotomy in the most lateral part of the ventralis intermedius nucleus (mlp-VIM). Stereotactic superselective VIM thalamotomy with depth microrecording was performed in 21 patients with essential tremor (ET) and 15 patients with tremor-dominant Parkinson disease (PD). A very small and narrow (axial plane) therapeutic lesion was formed as a square on the sagittal plane and inverse V on the axial plane in the mlp-VIM, which covered the kinesthetic response area topographically related to tremor. Patients with ET were followed up for 4.7 ± 3.0 years and patients with PD for 7.9 ± 3.9 years. Almost complete tremor control was achieved in all patients immediately after surgery and continued for up to 8 years. A few adverse events were recognized but disappeared within 1 month without 1 patient with thalamic hemorrhage. The medial border of the therapeutic lesion was significantly more lateral in both patients with ET and patients with PD than the calculated standard target point and was in patients with PD than in patients with ET. The mean width was only about 2.4 mm. The individual differences of the adequate location of the therapeutic lesion were significantly greater in the ET than in the PD group. The important area for reducing tremor was small and narrow and was located in the mlp-VIM, where the proprioceptive ascending signals from the tremor-dominant body part are conducted. Superselective thalamotomy in the mlp-VIM was safe and effective for the long-term in patients with ET and PD. Copyright © 2017 Elsevier Inc. All rights reserved.

  11. Importance of the Inverted Control in Measuring Holistic Face Processing with the Composite Effect and Part-Whole Effect

    Science.gov (United States)

    McKone, Elinor; Davies, Anne Aimola; Darke, Hayley; Crookes, Kate; Wickramariyaratne, Tushara; Zappia, Stephanie; Fiorentini, Chiara; Favelle, Simone; Broughton, Mary; Fernando, Dinusha

    2013-01-01

    Holistic coding for faces is shown in several illusions that demonstrate integration of the percept across the entire face. The illusions occur upright but, crucially, not inverted. Converting the illusions into experimental tasks that measure their strength – and thus index degree of holistic coding – is often considered straightforward yet in fact relies on a hidden assumption, namely that there is no contribution to the experimental measure from secondary cognitive factors. For the composite effect, a relevant secondary factor is size of the “spotlight” of visuospatial attention. The composite task assumes this spotlight can be easily restricted to the target half (e.g., top-half) of the compound face stimulus. Yet, if this assumption were not true then a large spotlight, in the absence of holistic perception, could produce a false composite effect, present even for inverted faces and contributing partially to the score for upright faces. We review evidence that various factors can influence spotlight size: race/culture (Asians often prefer a more global distribution of attention than Caucasians); sex (females can be more global); appearance of the join or gap between face halves; and location of the eyes, which typically attract attention. Results from five experiments then show inverted faces can sometimes produce large false composite effects, and imply that whether this happens or not depends on complex interactions between causal factors. We also report, for both identity and expression, that only top-half face targets (containing eyes) produce valid composite measures. A sixth experiment demonstrates an example of a false inverted part-whole effect, where encoding-specificity is the secondary cognitive factor. We conclude the inverted face control should be tested in all composite and part-whole studies, and an effect for upright faces should be interpreted as a pure measure of holistic processing only when the experimental design produces no

  12. Dissociative Part-Dependent Resting-State Activity in Dissociative Identity Disorder : A Controlled fMRI Perfusion Study

    NARCIS (Netherlands)

    Schlumpf, Yolanda R.; Reinders, Antje A. T. S.; Nijenhuis, Ellert R. S.; Luechinger, Roger; van Osch, Matthias J. P.; Jaencke, Lutz

    2014-01-01

    Background: In accordance with the Theory of Structural Dissociation of the Personality (TSDP), studies of dissociative identity disorder (DID) have documented that two prototypical dissociative subsystems of the personality, the "Emotional Part'' (EP) and the "Apparently Normal Part'' (ANP), have

  13. An alternative method for noise analysis using pixel variance as part of quality control procedures on digital mammography systems

    International Nuclear Information System (INIS)

    Bouwman, R; Broeders, M; Van Engen, R; Young, K; Lazzari, B; Ravaglia, V

    2009-01-01

    According to the European Guidelines for quality assured breast cancer screening and diagnosis, noise analysis is one of the measurements that needs to be performed as part of quality control procedures on digital mammography systems. However, the method recommended in the European Guidelines does not discriminate sufficiently between systems with and without additional noise besides quantum noise. This paper attempts to give an alternative and relatively simple method for noise analysis which can divide noise into electronic noise, structured noise and quantum noise. Quantum noise needs to be the dominant noise source in clinical images for optimal performance of a digital mammography system, and therefore the amount of electronic and structured noise should be minimal. For several digital mammography systems, the noise was separated into components based on the measured pixel value, standard deviation (SD) of the image and the detector entrance dose. The results showed that differences between systems exist. Our findings confirm that the proposed method is able to discriminate systems based on their noise performance and is able to detect possible quality problems. Therefore, we suggest to replace the current method for noise analysis as described in the European Guidelines by the alternative method described in this paper.

  14. Microstructural engineering applied to the controlled cooling of steel wire rod: Part I. Experimental design and heat transfer

    Science.gov (United States)

    Campbell, P. C.; Hawbolt, E. B.; Brimacombe, J. K.

    1991-11-01

    The goal of this study was to develop a mathematical model which incorporates heat flow, phase transformation kinetics, and property-structure-composition relationships to predict the mechanical properties of steel rod being control cooled under industrial conditions. Thus, the principles of microstructural engineering have been brought to bear on this interdisciplinary problem by combining computer modeling with laboratory measurements of heat flow, austenite decomposition kinetics, microstructure and mechanical properties, and industrial trials to determine heat transfer and obtain rod samples under known conditions. Owing to the length and diversity of the study, it is reported in three parts,[8191]the first of which is concerned with the heat flow measurements. A relatively simple and reliable technique, involving a preheated steel rod instrumented with a thermocouple secured at its centerline, has been devised to determine the cooling rate in different regions of the moving bed of rod loops on an operating Stelmor line. The measured thermal response of the rod has been analyzed by two transient conduction models (lumped and distributed parameter, respectively) to yield overall heat-transfer coefficients for radiation and convection. The adequacy of the technique has been checked by cooling instrumented rods under well-defined, air crossflow conditions in the laboratory and comparing measured heat-transfer coefficients to values predicted from well-established equations. The industrial thermal measurements have permitted the characterization of a coefficient to account for radiative interaction among adjacent rod loops near the edge and at the center of the bed.

  15. Radiation protection at the RA Reactor in 1984, Part -2, Annex 2a: Radioactivity control of the RA reactor environment - atmospheric precipitations, dust, water, soil, plants, fruit.

    International Nuclear Information System (INIS)

    Ajdacic, N.; Martic, M.; Jovanovic, J.

    1984-01-01

    Control of radioactivity in the biosphere in the vicinity of the RA reactor is part of the radioactivity control done regularly for the whole territory of the Vinca institute. During 1984 control was conducted according to the plan. According to the measured data no significant changes have been found in the surroundings of the RA reactor. All the analysed samples have followed the activity values of the precipitations

  16. Taxonomy of Means and Ends in Aquaculture Production—Part 2: The Technical Solutions of Controlling Solids, Dissolved Gasses and pH

    Directory of Open Access Journals (Sweden)

    Bjorgvin Vilbergsson

    2016-09-01

    Full Text Available In engineering design, knowing the relationship between the means (technique and the end (desired function or outcome is essential. The means in Aquaculture are technical solutions like airlifts that are used to achive desired functionality (an end like controlling dissolved gasses. In previous work, the authors identified possible functions by viewing aquaculture production systems as transformation processes in which inputs are transformed by treatment techniques (means and produce outputs (ends. The current work creates an overview of technical solutions of treatment functions for both design and research purposes. A comprehensive literature review of all areas of technical solutions is identified and categorized into a visual taxonomy of the treatment functions for controlling solids, controlling dissolved gasses and controlling pH alkalinity and hardness. This article is the second in a sequence of four and partly presents the treatments functions in the taxonomy. The other articles in this series present complementary aspects of this research: Part 1, A transformational view on aquaculture and functions divided into input, treatment and output functions; Part 2, The current taxonomy paper; Part 3, The second part of the taxonomy; and Part 4, Mapping of the means (techniques for multiple treatment functions.

  17. Components for containment enclosures. Part 4: Ventilation and gas-cleaning systems such as filters, traps, safety and regulation valves, control and protection devices

    International Nuclear Information System (INIS)

    2001-01-01

    ISO 11933 consists of the following parts, under the general title Components for containment enclosures: Part 1: Glove/bag ports, bungs for glove/bag ports, enclosure rings and interchangeable units; Part 2: Gloves, welded bags, gaiters for remote-handling tongs and for manipulators; Part 3: Transfer systems such as plain doors, airlock chambers, double door transfer systems, leaktight connections for waste drums; Part 4: Ventilation and gas-cleaning systems such as filters, traps, safety and regulation valves, control and protection devices; Part 5: Penetrations for electrical and fluid circuits. This part of ISO 11933 specifies the design criteria and the characteristics of various components used for ventilation and gas-cleaning in containment enclosures. These components are either directly fixed to the containment enclosure wall, or used in the environment of a shielded or unshielded containment enclosure or line of such enclosures. They can be used alone or in conjunction with other mechanical components, including those specified in ISO 11933-1 and ISO 11933-3. This part of ISO 11933 is applicable to: filtering devices, including high-efficiency particulate air (HEPA) filters and iodine traps; safety valves and pressure regulators; systems ensuring the mechanical protection of containment enclosures; control and pressure-measurement devices

  18. Spread of porcine circovirus associated disease (PCVAD in Ontario (Canada swine herds: Part II. Matched case-control study

    Directory of Open Access Journals (Sweden)

    Young Beth

    2010-12-01

    Full Text Available Abstract Background The emergence of porcine circovirus associated disease (PCVAD was associated with high mortality in swine populations worldwide. Studies performed in different regions identified spatial, temporal, and spatio-temporal trends as factors contributing to patterns of the disease spread. Patterns consistent with spatial trend and spatio-temporal clustering were already identified in this dataset. On the basis of these results, we have further investigated the nature of local spread in this report. The primary objective of this study was to evaluate risk factors for incidence cases of reported PCVAD. Results A time-matched case-control study was used as a study design approach, and conditional logistic regression as the analytical method. The main exposure of interest was local spread, which was defined as an unidentified mechanism of PCVAD spread between premises located within 3 kilometers of the Euclidean distance. Various modifications of variables indicative of local spread were also evaluated. The dataset contained 278 swine herds from Ontario originally sampled either from diagnostic laboratory submissions or directly from the target population. A PCVAD case was defined on the basis of the producer's recall. Existence of apparent local spread over the entire study period was confirmed (OR = 2.26, 95% CI: 1.06, 4.83, and was further identified to be time-varying in nature - herds experiencing outbreaks in the later part of the epidemic were more likely than control herds to be exposed to neighboring herds experiencing recent PCVAD outbreaks. More importantly, the pattern of local spread was driven by concurrent occurrence of PCVAD on premises under the same ownership (OREXACTwithin ownership = 25.6, 95% CI: 3.4, +inf; OREXACToutside ownership = 1.3, 95% CI: 0.45, 3.3. Other significant factors included PRRSv status of a herd (OREXACT = 1.9, 95% CI: 1.0, 3.9, after adjusting for geographical location by including the binary

  19. Controlled production of Camembert-type cheeses. Part II. Changes in the concentration of the more volatile compounds.

    Science.gov (United States)

    Leclercq-Perlat, Marie-Noëlle; Latrille, Eric; Corrieu, Georges; Spinnler, Henry-Eric

    2004-08-01

    Flavour generation in cheese is a major aspect of ripening. In order to enhance aromatic qualities it is necessary to better understand the chemical and microbiological changes. Experimental Camembert-type cheeses were prepared in duplicate from pasteurized milk inoculated with Kluyveromyces lactis, Geotrichum candidum, Penicillium camemberti and Brevibacterium linens under aseptic conditions. Two replicates performed under controlled conditions of temperature (12 degrees C), relative humidity (95 +/- 2%), and atmosphere showed similar ripening characteristics. The evolutions of metabolite concentrations were studied during ripening. The volatile components were extracted by dynamic headspace extraction, separated and quantified by gas chromatography and identified by mass spectrometry. For each cheese the volatile concentrations varied with the part considered (rind or core). Except for ethyl acetate and 2-pentanone, the volatile quantities observed were higher than their perception thresholds. The flavour component production was best correlated with the starter strains. During the first 10 days the ester formations (ethyl, butyl and isoamyl acetates) were associated with the concentrations of K. lactis and G. candidum. The rind quantity of esters was lower than that observed in core probably due to (1) a diffusion from the core to the surface and (2) evaporation from the surface to the chamber atmosphere. G. candidum and Brev. linens association produced 3 methyl butanol and methyl 3-butanal from leucine, respectively. DMDS came from the methionine catabolism due to Brev. linens. Styrene production was attributed to Pen. camemberti. 2-Pentanone evolution was associated with Pen. camemberti spores and G. candidum. 2-Heptanone changes were not directly related to flora activities while 2-octanone production was essentially due to G. candidum. This study also demonstrates the determining role of volatile component diffusion.

  20. Haptic control of a pneumatic muscle actuator to provide resistance for simulated isokinetic exercise: Part I--dynamic test station and human quadriceps dynamic simulator.

    Science.gov (United States)

    Hall, Kara L; Phillips, Chandler A; Reynolds, David B; Mohler, Stanley R; Rogers, Dana B; Neidhard-Doll, Amy T

    2014-01-01

    Pneumatic muscle actuators (PMAs) have a high power to weight ratio and possess unique characteristics which make them ideal actuators for applications involving human interaction. PMAs are difficult to control due to nonlinear dynamics, presenting challenges in system implementation. Despite these challenges, PMAs have great potential as a source of resistance for strength training and rehabilitation. The objective of this work was to control a PMA for use in isokinetic exercise, potentially benefiting anyone in need of optimal strength training through a joint's range of motion. A human quadriceps dynamic simulator (HQDS) was developed so that control effectiveness and accommodation could be tested prior to human implementation. The experimental set-up and HQDS are discussed in Part I of this work. The development of a PMA haptic controller and its interaction with the HQDS are discussed in Part II.

  1. A-Part Gel, an adhesion prophylaxis for abdominal surgery: a randomized controlled phase I-II safety study [NCT00646412].

    Science.gov (United States)

    Lang, Reinhold; Baumann, Petra; Schmoor, Claudia; Odermatt, Erich K; Wente, Moritz N; Jauch, Karl-Walter

    2015-01-01

    Intra-abdominal surgical intervention can cause the development of intra-peritoneal adhesions. To reduce this problem, different agents have been tested to minimize abdominal adhesions; however, the optimal adhesion prophylaxis has not been found so far. Therefore, the A-Part(®) Gel was developed as a barrier to diminish postsurgical adhesions; the aim of this randomized controlled study was a first evaluation of its safety and efficacy. In this prospective, controlled, randomized, patient-blinded, monocenter phase I-II study, 62 patients received either the hydrogel A-Part-Gel(®) as an anti-adhesive barrier or were untreated after primary elective median laparotomy. Primary endpoint was the occurrence of peritonitis and/or wound healing impairment 28 ± 10 days postoperatively. As secondary endpoints anastomotic leakage until 28 days after surgery, adverse events and adhesions were assessed until 3 months postoperatively. A lower rate of wound healing impairment and/or peritonitis was observed in the A-Part Gel(®) group compared to the control group: (6.5 vs. 13.8 %). The difference between the two groups was -7.3%, 90 % confidence interval [-20.1, 5.4 %]. Both treatment groups showed similar frequency of anastomotic leakage but incidence of adverse events and serious adverse events were slightly lower in the A-Part Gel(®) group compared to the control. Adhesion rates were comparable in both groups. A-Part Gel(®) is safe as an adhesion prophylaxis after abdominal wall surgery but no reduction of postoperative peritoneal adhesion could be found in comparison to the control group. This may at least in part be due to the small sample size as well as to the incomplete coverage of the incision due to the used application. NCT00646412.

  2. Application of fuzzy logic in nuclear reactor control Part I: An assessment of state-of-the-art

    International Nuclear Information System (INIS)

    Herger, A.S.; Jamshidl, M.; Alang-Rashid, N.K.

    1995-01-01

    This article discusses the application of fuzzy logic to nuclear reactor control. The method has been suggested by many investigators in many control applications. Reviews of the application of fuzzy logic in process control are given by Tong and Sugeno. Because fuzzy logic control (FLC) provides a pathway for transforming human abstractions into the numerical domain, it has the potential to assist nuclear reactor operators in the control room. With this transformation, linguistically expressed control principles can be coded into the fuzzy controller rule base. Having acquired the skill of the operators, the FLC can assist an operator in controlling the complex system. The thrust of FLC is to derive a conceptual model of the control operation, without expressing the process as mathematical equations, to assist the human operator in interpreting incoming plant variables and arriving at a proper control action. To introduce the concept of FLC in nuclear reactor operation, an overview of the mythology and a review of its application in both nuclear and nonnuclear control application domains are presented along with subsequent discussion of fuzzy logic controllers, their structures, and their method of information processing. The article concludes with the application of a tunable FLC to a typical reactor control problem

  3. Application of fuzzy logic in nuclear reactor control: Part 1: An assessment of state-of-the-art

    International Nuclear Information System (INIS)

    Heger, A.S.; Alang-Rashid, N.K.; Jamshidi, M.

    1995-01-01

    This article discusses the application of fuzzy logic of nuclear reactor control. The method has been suggested by many investigators in many control applications. Reviews of the application of fuzzy logic in process control are given by Tong and Sugeno. Because fuzzy logic control (FLC) provides a pathway for transforming human abstractions into the numerical domain, it has the potential to assist nuclear reactor operators in the control room. With this transformation, linguistically expressed control principles can be coded into the fuzzy controller rule base. Having acquired the skill of he operators, the FLC can assist an operator in controlling the complex system. The thrust of FLC is to derive a conceptual model of the control operation, without expressing the process as mathematical equations, to assist the human operator in interpreting incoming plant variables and arriving at a proper control action. To introduce the concept of FLC in nuclear reactor operation, an overview of the mythology and a review of its application in both nuclear and nonnuclear control application domains are presented along with subsequent discussion of fuzzy logic controllers, their structures, and their method of information processing. The article concludes with the application of a tunable FLC to a typical reactor control problem. 49 refs., 9 figs., 3 tabs

  4. Transient modeling of an air-cooled chiller with economized compressor. Part II: Application to control design

    International Nuclear Information System (INIS)

    Zhang Weijiang; Ding Shufu; Zhang Chunlu

    2009-01-01

    Based on the transient modeling developed in the previous paper, the control design of the air-cooled chiller is studied. The main electronic expansion valve (EXV) controls the suction superheat, the compressor controls the leaving water temperature and the sub EXV regulates the injection superheat. Since the system reliability is sensitive to the control of the suction superheat, it is the focus in this paper. Dynamic simulation cases are built to compare two control algorithms, PID and fuzzy logic. The case studies show that the fuzzy controller has higher reliability and performance. Both the two controllers are fully tested and tuned on a chiller test facility and the experiments indicate that the fuzzy controller works better as well.

  5. 40 CFR Appendix B to Part 76 - Procedures and Methods for Estimating Costs of Nitrogen Oxides Controls Applied to Group 1, Boilers

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Procedures and Methods for Estimating Costs of Nitrogen Oxides Controls Applied to Group 1, Boilers B Appendix B to Part 76 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) ACID RAIN NITROGEN OXIDES...

  6. Scada Systems – Control, Supervision and Data Acquisition for the Power Plants Settled on a Stream (Part 2

    Directory of Open Access Journals (Sweden)

    Cosmin Ursoniu

    2015-09-01

    Full Text Available Scada (supervisory control and data acquisition is a complex system that supervises and controls an industrial process and performs several functions. A human machine interface will also be presented and how the process in a power plant is controlled and supervised through it by the operator. The main screen will be described (which is a global view of the hydro unit and what the operator can see and what he can press to control the power plants process also a few more screens will be presented for auxiliary installations and it will be described what the operator can see and what he can do to control the installation.

  7. Scada Systems – Control, Supervision and Data Acquisition for the Power Plants Settled on a Stream (Part 1

    Directory of Open Access Journals (Sweden)

    Cosmin Ursoniu

    2015-09-01

    Full Text Available Scada (supervisory control and data acquisition is a complex system that supervises and control an industrial process and performs several functions. A human machine interface will also be presented and how the process in a power plant is controlled and supervised through it by the operator. The main screen will be described (which is a global view of the hydro unit and what the operator can see and what he can press to control the power plants process also a few more screens will be presented for auxiliary installations and it will be described what the operator can see and what he can do to control the installation.

  8. Radiation protection at the RA Reactor in 1994. Part 2, Annex 1, Control of the working environment, dosimetry and radiation protection

    International Nuclear Information System (INIS)

    Pavlovic, R.; Kalinic, S.

    1994-01-01

    This report contains data and analysis of the of measured sample results collected during radiation protection control in the working environment of the RA reactor. First part contains basic exposure values and statistical review of the the total number of radiation measurements. It includes contents of radioactive gasses and effluents in the air, as well as the level of surface contamination of clothes and uncovered parts of the personnel bodies. Second part deals with the analysis of personnel doses. Third part of this annex contains basic data about the quantity of collected radioactive waste, total quantity of contaminated and decontaminated surfaces. It is stated that there have been no accidents that could cause significant contamination of working surfaces and components nor radiation exposure of the personnel [sr

  9. Multi-echelon, multi-indenture spare parts inventory control subject to system availability and budget constraints

    International Nuclear Information System (INIS)

    Costantino, Francesco; Di Gravio, Giulio; Tronci, Massimo

    2013-01-01

    Inventory management of spare parts is one of the most critical issues in the aeronautical industry, given the required level of system availability related to the strategic importance and high stocking costs of the components. Even if a large number of spare parts increases warehousing costs, every single shortage have a greater impact: the adoption of best-in-class inventory management techniques becomes crucial. On these considerations, the paper presents an innovative model of spare parts allocation for the Italian Air Force with the aim of minimizing backorders and, at the same time, ensuring an availability of 99% depending on the actual flight plan. The model, solved by a marginal analysis, considers an original configuration of features combining different skills of maintenance centers in a hierarchical multi-echelon, multi-item, multi-indenture structure. A real case is provided in order to analyze the solving method and the results. -- Highlights: •We studied a problem of allocations for spare parts of aeronautical systems. •The model presents different repair capabilities of maintenance centers. •The model fits constraints on budget and on total operational availability. •The model is solved by a marginal analysis with a backorder/price ratio. •A numerical example shows a spare parts allocation with relative considerations

  10. Heuristics for multi-item two-echelon spare parts inventory control subject to aggregate and individual service measures

    NARCIS (Netherlands)

    Topan, E.; Bayindir, Z.P.; Tan, T.

    2017-01-01

    We consider a multi-item two-echelon spare parts inventory system in which the central warehouse operates under a (Q, R) policy and local warehouses implement (S−1,S) policy. The objective is to find the policy parameters minimizing expected system-wide inventory holding and fixed ordering subject

  11. MODELING OF THE HEAT PUMP STATION CONTROLABLE LOOP OF AN INTERMEDIATE HEAT-TRANSFER AGENT (Part II

    Directory of Open Access Journals (Sweden)

    Sit M.L.

    2011-08-01

    Full Text Available It is studied the model of the heat pump station controllable loop of an intermediate heat-transfer agent for the use in wineries. There are demonstrated transients after the disturbing action of the temperature on the input of cooling jacket of the fermentation stirred tank. There are compared different control laws of the object.

  12. H2-optimal control of an adaptive optics system : Part I, data-driven modeling of the wavefront disturbance

    NARCIS (Netherlands)

    Hinnen, K.; Verhaegen, M.; Doelman, N.

    2005-01-01

    Even though the wavefront distortion introduced by atmospheric turbulence is a dynamic process, its temporal evolution is usually neglected in the adaptive optics (AO) control design. Most AO control systems consider only the spatial correlation in a separate wavefront reconstruction step. By

  13. Aplicación de RT-Linux en el control de motores de pasos. Parte I; Application of RT-Linux in the Control of Steps Mators. Part I

    Directory of Open Access Journals (Sweden)

    Ernesto Duany Renté

    2011-02-01

    Full Text Available La idea fundamental de este artículo es mostrar cómo controlar un motor de paso empleando el puertoparalelo de una computadora, y demostrar la eficiencia temporal de las aplicaciones que se desarrollan ensistemas preparados para ejecutar tareas de precisión; aprovechar al máximo la capacidad de tiempo realestricto que brinda RT-Linux para el control de accionamientos eléctricos. Se desarrolla un pequeño softwareen lenguaje C que envía las señales al puerto paralelo en el tiempo necesario. Este software no estádiseñado con fines comerciales, solo permite realizar pruebas sobre el circuito de control diseñado paraeste propósito.  The fundamental idea of this article is to control a steps motor using the parallel port of a computer anddemonstrate the temporary efficiency of the applications that are executed in prepared systems to executetasks of real time. To take advantage of to the maximum capacity of strict real time that RT-Linux offers usfor the control of electric workings. A small software is developed in language C that sent the signs to theparallel port in the necessary time. This software is not designed with commercial, only allows to carry outtests on the control circuit designed for this purpose.

  14. Impact of late-to-refill reminder calls on medication adherence in the Medicare Part D population: evaluation of a randomized controlled study

    Directory of Open Access Journals (Sweden)

    Taitel MS

    2017-02-01

    Full Text Available Michael S Taitel, Ying Mu, Angshuman Gooptu, Youbei Lou Health Analytics, Research & Reporting, Walgreen Co., Deerfield, IL, USA Objectives: This study evaluates a nationwide pharmacy chain’s late-to-refill (LTR reminder program that entails local pharmacists placing reminder calls to Medicare Part D patients. Methods: We conducted a randomized controlled study among 735,218 patients who exhibited nonadherent behavior by not refilling a maintenance medication 3 days from an expected refill date. Patients were randomly assigned to an intervention group who received LTR reminder calls or to a control group. We used Walgreens pharmaceutical claims data from 2015 to estimate the impact of LTR calls on short-term and annual adherence. Results: The initial refill rate within the first 14 days of the expected refill date significantly increased in the intervention group by 22.8% (6.09 percentage points compared to the control group (P<0.001. The proportion of days covered (PDC in the intervention group increased significantly by 1.5% (0.856 percentage points relative to the control group (P<0.001 over 365 days. Patients in the intervention group were significantly more adherent (PDC ≥80% by 3% (0.97 percentage points compared to the control group (P<0.001. Over a 270-day follow-up period, persistence significantly increased by 2.15 days in the intervention group (P<0.001. Conclusion: Results from this study suggest that LTR reminder calls increased adherence for Medicare Part D patients who are late in refilling their medications and therefore have the potential to reduce their risk for hospitalization and health care costs. Additionally, the intervention increased the number of patients with PDC ≥80% by ~3%, positively impacting Medicare Part D plan quality rating. Keywords: reminder system, tailored intervention, Medicare Part D, adherence, persistence

  15. Bio boiler - Control conditions. Part 1: Model development and analysis of operating conditions; Biokedel - Reguleringsmaessige forhold. Del 1: Modeludvikling og analyse af dynamiske driftsforhold

    Energy Technology Data Exchange (ETDEWEB)

    Boecher Poulsen, K.; Christensen, Torkild; Mortensen, Jan; Runge Kristoffersen, J.; Kristmundsson, E. [Tech-wise A/S (Denmark); Moekbak, T.; Mortensen, Hans Peter [Elsam A/S (Denmark)

    2002-12-15

    This report focuses on the model-building part of the PSO project, 'Control Conditions Bio-boiler'. In the project, which treats dynamic simulation of biomass fired power plants via the MMS software, a certain number of straw/wood chip modules have been built, together with a combustion module which, when connected to the existing MMS modules, can be used for dynamic simulation. Furthermore, a certain number of continuous and discrete components have been built which, together with the remaining MMS modules will create a complete model of the active part of the control structure under the most common operation conditions. By means of the developed straw, combustion and control modules, a model of Enstedvaerket's bio-boiler is built (without wood chip super-heater), including practically all auxiliary control mechanisms. In the report the primary problems caused by the development of the model are discussed, typically numerical problems. First of all it is discussed how a steady state condition can be reached from a nonphysical condition at the start-up of the simulation. After reaching a steady state condition at full load, the boiler load is reduced by adjusting the desired live steam flow setpoint value and the load gradient (as it would be done from the control room). While reducing to part load, one straw line is closed down, as it would be done in 'real life'. From part load, the boiler load is once again in the same way increased to full. (BA) The simulation results are then compared to measurements made on the same boiler during load reduction and load increase.

  16. Development of an aging integrator for uranium-0.75 weight percent titanium alloy part aging control

    International Nuclear Information System (INIS)

    Howington, L.C.

    1977-12-01

    An instrumentation system (Aging Integrator) has been developed to provide more precise control of the heat-treatment process used on uranium-0.75 wt.% titanium alloy material. The Aging Integrator calculates the integral of a predetermined aging function to control the aging period in the heat-treatment process. This control was employed to compensate for discrepancies caused by variations in heatup times, furnace-control fluctuations, and disagreement as to the temperature at which aging actually starts. Although the Aging Integrator hardware has been installed and satisfactorily tested on a production-area furnace, sufficient data to estimate a statistically sound aging integration function will not be available for approximately one year

  17. Design verification and fabrication of active control systems for the DAST ARW-2 high aspect ratio wing, part 1

    Science.gov (United States)

    Mcgehee, C. R.

    1986-01-01

    A study was conducted under Drones for Aerodynamic and Structural Testing (DAST) program to accomplish the final design and hardware fabrication for four active control systems compatible with and ready for installation in the NASA Aeroelastic Research Wing No. 2 (ARW-2) and Firebee II drone flight test vehicle. The wing structure was designed so that Active Control Systems (ACS) are required in the normal flight envelope by integrating control system design with aerodynamics and structure technologies. The DAST ARW-2 configuration uses flutter suppression, relaxed static stability, and gust and maneuver load alleviation ACS systems, and an automatic flight control system. Performance goals and criteria were applied to individual systems and the systems collectively to assure that vehicle stability margins, flutter margins, flying qualities and load reductions are achieved.

  18. Part two

    DEFF Research Database (Denmark)

    Nielsen, Mads Pagh; Kær, Søren Knudsen; Korsgaard, Anders

    2008-01-01

    A novel micro combined heat and power system and a dynamic model thereof were presented in part one of the publication. In the following, the control system and dynamic performance of the system are presented. The model is subjected to a measured consumption pattern of 25 Danish single family...... houses with measurements of heat, power and hot water consumption every 15th minute during one year. Three scenarios are analyzed ranging from heat following only (grid compensation for electricity) to heat and power following with net export of electricity during high and peak load hours. Average...

  19. Prediction of forces and moments for flight vehicle control effectors. Part 1: Validation of methods for predicting hypersonic vehicle controls forces and moments

    Science.gov (United States)

    Maughmer, Mark D.; Ozoroski, L.; Ozoroski, T.; Straussfogel, D.

    1990-01-01

    Many types of hypersonic aircraft configurations are currently being studied for feasibility of future development. Since the control of the hypersonic configurations throughout the speed range has a major impact on acceptable designs, it must be considered in the conceptual design stage. The ability of the aerodynamic analysis methods contained in an industry standard conceptual design system, APAS II, to estimate the forces and moments generated through control surface deflections from low subsonic to high hypersonic speeds is considered. Predicted control forces and moments generated by various control effectors are compared with previously published wind tunnel and flight test data for three configurations: the North American X-15, the Space Shuttle Orbiter, and a hypersonic research airplane concept. Qualitative summaries of the results are given for each longitudinal force and moment and each control derivative in the various speed ranges. Results show that all predictions of longitudinal stability and control derivatives are acceptable for use at the conceptual design stage. Results for most lateral/directional control derivatives are acceptable for conceptual design purposes; however, predictions at supersonic Mach numbers for the change in yawing moment due to aileron deflection and the change in rolling moment due to rudder deflection are found to be unacceptable. Including shielding effects in the analysis is shown to have little effect on lift and pitching moment predictions while improving drag predictions.

  20. Radiation protection at the RA Reactor in 1986, Part -2, Annex 2a, Radioactivity control of the RA reactor environment (atmospheric precipitations, dust, water, soil, plants, fruit...)

    International Nuclear Information System (INIS)

    Ajdacic, N.; Martic, M.; Jovanovic, J.

    1986-01-01

    Control of radioactivity in the biosphere in the vicinity of the RA reactor is part of the radioactivity control done regularly for the whole territory of the Vinca institute (report by the same authors included in this Annex). During 1986 control was conducted according to the plan until May 1, 1986 when a dramatic increase of the precipitations and all other samples from the biosphere was recorded. According to the measured data no significant changes have been found in the surroundings of the RA reactor, until April 29 1986. Since then more detailed control was conducted, the number of samples was increased, apart from standard measuring procedure of total beta activity measurements, gamma spectrometry of all samples was applied. High activity level of the following nuclides was found: Iodine, cerium,cesium, tellurium, ruthenium, barium, lanthanum, etc. As an example activity of ?1?3?1 I in one sample was 564±5 kBq/m 2 [sr

  1. Stability Improvement of High-Pressure-Ratio Turbocharger Centrifugal Compressor by Asymmetric Flow Control-Part I: Non-Axisymmetrical Flow in Centrifugal Compressor.

    Science.gov (United States)

    Yang, Mingyang; Zheng, Xinqian; Zhang, Yangjun; Bamba, Takahiro; Tamaki, Hideaki; Huenteler, Joern; Li, Zhigang

    2013-03-01

    This is Part I of a two-part paper documenting the development of a novel asymmetric flow control method to improve the stability of a high-pressure-ratio turbocharger centrifugal compressor. Part I focuses on the nonaxisymmetrical flow in a centrifugal compressor induced by the nonaxisymmetrical geometry of the volute while Part II describes the development of an asymmetric flow control method to avoid the stall on the basis of the characteristic of nonaxisymmetrical flow. To understand the asymmetries, experimental measurements and corresponding numerical simulation were carried out. The static pressure was measured by probes at different circumferential and stream-wise positions to gain insights about the asymmetries. The experimental results show that there is an evident nonaxisymmetrical flow pattern throughout the compressor due to the asymmetric geometry of the overhung volute. The static pressure field in the diffuser is distorted at approximately 90 deg in the rotational direction of the volute tongue throughout the diffuser. The magnitude of this distortion slightly varies with the rotational speed. The magnitude of the static pressure distortion in the impeller is a function of the rotational speed. There is a significant phase shift between the static pressure distributions at the leading edge of the splitter blades and the impeller outlet. The numerical steady state simulation neglects the aforementioned unsteady effects found in the experiments and cannot predict the phase shift, however, a detailed asymmetric flow field structure is obviously obtained.

  2. Quality Control of Laser-Beam-Melted Parts by a Correlation Between Their Mechanical Properties and a Three-Dimensional Surface Analysis

    Science.gov (United States)

    Grimm, T.; Wiora, G.; Witt, G.

    2017-03-01

    Good correlations between three-dimensional surface analyses of laser-beam-melted parts of nickel alloy HX and their mechanical properties were found. The surface analyses were performed with a confocal microscope, which offers a more profound surface data basis than a conventional, two-dimensional tactile profilometry. This new approach results in a wide range of three-dimensional surface parameters, which were each evaluated with respect to their feasibility for quality control in additive manufacturing. As a result of an automated surface analysis process by the confocal microscope and an industrial six-axis robot, the results are an innovative approach for quality control in additive manufacturing.

  3. Pacific Northwest Laboratory annual report for 1979 to the DOE Assistant Secretary for Environment. Part 5. Environmental assessment, control, health, and safety

    International Nuclear Information System (INIS)

    Baalman, R.W.; Dotson, C.W.

    1980-02-01

    Part 5 of the 1979 Annual Report to the Department of Energy Assistant Secretary for the Environment presents Pacific Northwest Laboratory's progress on work performed for the Office of Technology Impacts, the Office of Environmental Compliance and Overview, and the Office of Health and Environmental Research. The report is in four sections, corresponding to the program elements: technology impacts, environmental control engineering, operational and environmental compliance, and human health studies. In each section, articles describe progress made during FY 1979 on individual projects

  4. AISI/DOE Advanced Process Control Program Vol. 3 of 6 Microstructure Engineering in Hot Strip Mills, Part 1 of 2: Integrated Mathematical Model

    Energy Technology Data Exchange (ETDEWEB)

    J.K. Brimacombe; I.V. Samarasekera; E.B. Hawbolt; T.R. Meadowcroft; M. Militzer; W.J. Pool; D.Q. Jin

    1999-07-31

    This report describes the work of developing an integrated model used to predict the thermal history, deformation, roll forces, microstructural evolution and mechanical properties of steel strip in a hot-strip mill. This achievement results from a joint research effort that is part of the American Iron and Steel Institute's (AIS) Advanced Process Control Program, a collaboration between the U.S. DOE and fifteen North American Steelmakers.

  5. The Role of Internal Control as a Part of Internal Audit in Implementation as the Legal Service Agency (Case Study in Haluoleo University, Indonesia)

    OpenAIRE

    Nitri Mirosea; Hasbudin

    2012-01-01

    The report analyses the role of internal control as a part of the internal audit function in Haluoleo University. The aim behind this study is to give conclusion and recommendations to improve the performance of internal audit unit in order to support the good governance of the university. The recommendation if delivered can be a strong contribution of strength for the university to add value and for the responsibility to the stakeholders. The research was delivered through questionnaires, in...

  6. A New Approach to Control Single-Link Flexible Arms. Part 2. Control of the Tip Position in the Presence of Joint Friction

    Science.gov (United States)

    1989-07-01

    July 1989 Copyright @ 1989 Carnegie Mellon University ’Visiting Professor, Dpto Ingenieria Eldctrica, Electr6nica y Control, UNED, Ciudad Universitaria...signals typically utilized in existing industrial and research robots are parabolic trajectories of order at least two. This is because the desired...Discretos de Control Multivariables. Ph.D. Thesis, E.TS.I. Industriales of Universidad Politicnica of Madrid. September 1982. [14] Craig, J.J

  7. The effect of the masses of the controls on the longitudinal stability with free elevator. Part I

    Science.gov (United States)

    Schmidt, Rudolf

    1939-01-01

    In the present report, aerodynamic relations under the effect of the weight moments are investigated, and an example given of the computation of the stability for a practical case. Later, the effects of the masses of the controls on the dynamic longitudinal stability will be considered.

  8. A Study of Active Rotor-Blade Vibration Control using Electro-Magnetic Actuation - Part I: Theory

    DEFF Research Database (Denmark)

    Christensen, Rene Hardam; Santos, Ilmar

    2004-01-01

    actuators fixed directly in the blades. However, due to the impracticability and problems by fixing actuators in the rotating blades, it is for practical application of great interest to study whether the vibrations can be controlled using shaft-based actuators, i.e. electro-magnetic bearings...

  9. Choosing the Optimal Number of B-spline Control Points (Part 1: Methodology and Approximation of Curves)

    Science.gov (United States)

    Harmening, Corinna; Neuner, Hans

    2016-09-01

    Due to the establishment of terrestrial laser scanner, the analysis strategies in engineering geodesy change from pointwise approaches to areal ones. These areal analysis strategies are commonly built on the modelling of the acquired point clouds. Freeform curves and surfaces like B-spline curves/surfaces are one possible approach to obtain space continuous information. A variety of parameters determines the B-spline's appearance; the B-spline's complexity is mostly determined by the number of control points. Usually, this number of control points is chosen quite arbitrarily by intuitive trial-and-error-procedures. In this paper, the Akaike Information Criterion and the Bayesian Information Criterion are investigated with regard to a justified and reproducible choice of the optimal number of control points of B-spline curves. Additionally, we develop a method which is based on the structural risk minimization of the statistical learning theory. Unlike the Akaike and the Bayesian Information Criteria this method doesn't use the number of parameters as complexity measure of the approximating functions but their Vapnik-Chervonenkis-dimension. Furthermore, it is also valid for non-linear models. Thus, the three methods differ in their target function to be minimized and consequently in their definition of optimality. The present paper will be continued by a second paper dealing with the choice of the optimal number of control points of B-spline surfaces.

  10. Field evalution of controling methods of mango fruit flies bactrocera zonata (Biptera:Tephritidae in the southern part of Iran

    Directory of Open Access Journals (Sweden)

    M. Khosravi

    2018-03-01

    Full Text Available Purpose: Bactrocera zonata (Diptera, Tephritidae, is considered as a dangerous pest of mango in the south of Iran, which its control is one of the main concerns of farmers who are facing numerous problems. To assay the different methods for controlling B. zonata, this study was carried out. Method: The treatments were, A spraying 7% methyl eugenol+7% technical malathion on trunk and tree branches, B soaking 8-10 layers of jute sacks with previous treatment that were attached to tree branches, C bucket trap along with chipboard that was saturated with 6 ml of methyl eugenol, D spraying 3% protein hydrolysate+3 ppm malathion (EC 57% on the trunk and tree branches, E spraying 3% sugar permit+3 ppm malathion on the trunk and tree branches, and F control (no treatment. The experiments were repeated at two consecutive years. Results: The results confirmed that the differences among treatments and the effect of the year on the treatments were significant (p>1%. The treatment D captured the highest numbers of fruit flies in both years of replications. The treatments had significant effect on percentage of fruit infestation. Conclusion: The findings confirmed that treatments C and B had the greatest impact on pest control.

  11. The influence of rolled erosion control systems on soil temperature and surface albedo: part I. A greenhouse experiment

    International Nuclear Information System (INIS)

    Sutherland, R.A.; Menard, T.; Perry, J.L.; Penn, D.C.

    1998-01-01

    A greenhouse study examined the influences of various surface covers (a bare control soil and seven rolled erosion control systems—RECS) on surface radiative properties, and soil temperature. In our companion paper we examine relationships with soil moisture, biomass production, and nutrient assimilation. Randomization and replication were key components to our study of microclimate under tropical radiation conditions. The bare Oxisol control soil exhibited the most extreme microclimatic conditions with the lowest albedo (not significantly different from that of P300© North American Green, a dark green polypropylene system), and the highest mean and maximum hourly temperatures recorded at depths of 5 and 8 cm. This hostile climatic environment was not conducive to biomass production or moisture storage and it is likely that the observed soil surface crusts impeded plant emergence. Rolled erosion control systems, on the other hand, generally moderated soil temperatures by reflecting more shortwave radiation, implying less heat energy at the surface for conduction to the soil. The result was that RECS exhibited lower mean soil temperatures, higher minimum temperatures and lower maximum soil temperatures. An aspen excelsior system (Curlex I© Excelsior) had the highest albedo and the soil beneath this system exhibited the greatest temperature modulation. Open-weave systems composed of jute (Geojute© Price & Pictures) and coconut fibers (BioD-Mat 70© RoLanka) were the RECS most similar in temperature response to the bare control soil. Other systems examined were intermediate in their temperature response and surface albedo (i.e., SC150BN© North American Green, C125© North American Green and Futerra© Conwed Fibers). (author)

  12. Indices system design of distribution logistics, transport logistics and materials flow as parts of controlling in enterprise´s logistics

    Directory of Open Access Journals (Sweden)

    Andrea Rosová

    2010-02-01

    Full Text Available There is necessary to think about two aspects while applying controlling in logistics. The main aim of the logistics in relationto business economics is assessing support to the invested financial capital resources – it is the first aspect. The second one is basedon the target of controlling – continuous monitoring of company’s economy. In order to make a logistics controlling successful and withrequired results it is necessary to utilize any logistics controlling tools. One of the tools in logistics controlling is a set of indicators.Important part of controlling logistics system is monitoring and evaluation of logistics markers. Logistic markers representsynthetic view to logistic performance and logistic costs by the means of interaction rate so that it can evaluate logistic activities area,cost economy and final productivity of logistics activities in company.This contribution deals with markers system proposal of distribution logistics, transport logistics and materials flow control.System of markers is designed with regard to basic facilities and specifications, who has to copy character and disposition rememberedsubsystems enterprise’s logistics system.

  13. Trends in Energy Management Technology - Part 4: Review ofAdvanced Applications in Energy Management, Control, and InformationSystems

    Energy Technology Data Exchange (ETDEWEB)

    Yee, Gaymond; Webster, Tom

    2003-08-01

    In this article, the fourth in a series, we provide a review of advanced applications in Energy Management, Control, and Information Systems (EMCIS). The available features for these products are summarized and analyzed with regard to emerging trends in EMCIS and potential benefits to the Federal sector. The first article [1] covered enabling technologies for emerging energy management systems. The second article [2] serves as a basic reference for building control system (BCS) networking fundamentals and includes an assessment of current approaches to open communications. The third article [3] evaluated several products that exemplify the current state of practice in EMCIS. It is important for energy managers in the Federal sector to have a high level of knowledge and understanding of these complex energy management systems. This series of articles provides energy practitioners with some basic informational and educational tools to help make decisions relative to energy management systems design, specification, procurement, and energy savings potential.

  14. Innovative In-Situ Remediation of Contaminated Sediments for Simultaneous Control of Contamination and Erosion. Part 1

    Science.gov (United States)

    2011-08-01

    Mn3+ in the oxide crystal lattice, and (3) replacement of Mn3+ or Mn4+ by Co3 +. Generally, the sorption of Co by Mn oxides increases greatly with pH...four treatments: two control treatments consisting of uncapped sediments (i.e., no amendments added); two caps composed of a single six inch layer of 50...organoclays and biopolymer coated sand for various hydrophobic organic compounds. Point ( single concentration) partition coefficient measurements

  15. Intrathecal Morphine for Laparoscopic Segmental Colonic Resection as Part of an Enhanced Recovery Protocol: A Randomized Controlled Trial.

    Science.gov (United States)

    Koning, Mark V; Teunissen, Aart Jan W; van der Harst, Erwin; Ruijgrok, Elisabeth J; Stolker, Robert Jan

    2018-02-01

    Management of postoperative pain after laparoscopic segmental colonic resections remains controversial. We compared 2 methods of analgesia within an Enhanced Recovery After Surgery (ERAS) program. The goal of the study was to investigate whether administration of intrathecal bupivacaine/morphine would lead to an enhanced recovery. A single-center, randomized, double-blind controlled trial was performed (NL43488.101.13). Patients scheduled for laparoscopic segmental intestinal resections were considered. Exclusion criteria were patients in whom contraindications to spinal anesthesia were present, conversion to open surgery, and gastric and rectal surgery. The intervention group received single-shot intrathecal bupivacaine/morphine (12.5 mg/300 μg), with an altered dose for older patients. The control group received a sham procedure and a bolus of piritramide (0.1 mg/kg). Both groups received standardized general anesthesia and a patient-controlled intravenous analgesia pump as postoperative analgesia. All patients were treated according to an ERAS protocol. A decrease in days to "fit for discharge" was the primary outcome. Fifty-six patients were enrolled. Intervention group patients were fit for discharge earlier (median of 3 vs 4 days, P = 0.044). Furthermore, there was a significant decrease in opioid use and lower pain scores on the first postoperative day in the intervention group. There were no differences in adverse events (except for more pruritus), time to mobilization, fluid administration, or patient satisfaction. This randomized controlled trial shows that intrathecal morphine is a more effective method of postoperative analgesia in laparoscopic surgery than intravenous opioids within an ERAS program. Recovery is faster and less painful with intrathecal morphine. Other studies have confirmed these results, although data on faster recovery are new and require confirmation in future trials. This study was registered at ClinicalTrials.gov, identifier NCT

  16. A finite state, finite memory minimum principle, part 2. [a discussion of game theory, signaling, stochastic processes, and control theory

    Science.gov (United States)

    Sandell, N. R., Jr.; Athans, M.

    1975-01-01

    The development of the theory of the finite - state, finite - memory (FSFM) stochastic control problem is discussed. The sufficiency of the FSFM minimum principle (which is in general only a necessary condition) was investigated. By introducing the notion of a signaling strategy as defined in the literature on games, conditions under which the FSFM minimum principle is sufficient were determined. This result explicitly interconnects the information structure of the FSFM problem with its optimality conditions. The min-H algorithm for the FSFM problem was studied. It is demonstrated that a version of the algorithm always converges to a particular type of local minimum termed a person - by - person extremal.

  17. Exploring the physical controls of regional patterns of flow duration curves – Part 1: Insights from statistical analyses

    Directory of Open Access Journals (Sweden)

    S. Ye

    2012-11-01

    Full Text Available The flow duration curve (FDC is a classical method used to graphically represent the relationship between the frequency and magnitude of streamflow. In this sense it represents a compact signature of temporal runoff variability that can also be used to diagnose catchment rainfall-runoff responses, including similarity and differences between catchments. This paper is aimed at extracting regional patterns of the FDCs from observed daily flow data and elucidating the physical controls underlying these patterns, as a way to aid towards their regionalization and predictions in ungauged basins. The FDCs of total runoff (TFDC using multi-decadal streamflow records for 197 catchments across the continental United States are separated into the FDCs of two runoff components, i.e., fast flow (FFDC and slow flow (SFDC. In order to compactly display these regional patterns, the 3-parameter mixed gamma distribution is employed to characterize the shapes of the normalized FDCs (i.e., TFDC, FFDC and SFDC over the entire data record. This is repeated to also characterize the between-year variability of "annual" FDCs for 8 representative catchments chosen across a climate gradient. Results show that the mixed gamma distribution can adequately capture the shapes of the FDCs and their variation between catchments and also between years. Comparison between the between-catchment and between-year variability of the FDCs revealed significant space-time symmetry. Possible relationships between the parameters of the fitted mixed gamma distribution and catchment climatic and physiographic characteristics are explored in order to decipher and point to the underlying physical controls. The baseflow index (a surrogate for the collective impact of geology, soils, topography and vegetation, as well as climate is found to be the dominant control on the shapes of the normalized TFDC and SFDC, whereas the product of maximum daily precipitation and the fraction of non-rainy days

  18. Exploring the physical controls of regional patterns of flow duration curves – Part 2: Role of seasonality, the regime curve, and associated process controls

    Directory of Open Access Journals (Sweden)

    M. Sivapalan

    2012-11-01

    Full Text Available The goal of this paper is to explore the process controls underpinning regional patterns of variations of streamflow regime behavior, i.e., the mean seasonal variation of streamflow within the year, across the continental United States. The ultimate motivation is to use the resulting process understanding to generate insights into the physical controls of another signature of streamflow variability, namely the flow duration curve (FDC. The construction of the FDC removes the time dependence of flows. Thus in order to better understand the physical controls in regions that exhibit strong seasonal dependence, the regime curve (RC, which is closely connected to the FDC, is studied in this paper and later linked back to the FDC. To achieve these aims a top-down modeling approach is adopted; we start with a simple two-stage bucket model, which is systematically enhanced through addition of new processes on the basis of model performance assessment in relation to observations, using rainfall-runoff data from 197 United States catchments belonging to the MOPEX dataset. Exploration of dominant processes and the determination of required model complexity are carried out through model-based sensitivity analyses, guided by a performance metric. Results indicated systematic regional trends in dominant processes: snowmelt was a key process control in cold mountainous catchments in the north and north-west, whereas snowmelt and vegetation cover dynamics were key controls in the north-east; seasonal vegetation cover dynamics (phenology and interception were important along the Appalachian mountain range in the east. A simple two-bucket model (with no other additions was found to be adequate in warm humid catchments along the west coast and in the south-east, with both regions exhibiting strong seasonality, whereas much more complex models are needed in the dry south and south-west. Agricultural catchments in the mid-west were found to be difficult to predict

  19. Fructan biosynthesis and degradation as part of plant metabolism controlling sugar fluxes during durum wheat kernel maturation

    Directory of Open Access Journals (Sweden)

    Sara eCimini

    2015-02-01

    Full Text Available Wheat kernels contain fructans, fructose based oligosaccharides with prebiotic properties, in levels between 2 and 35 weight % depending on the developmental stage of the kernel. To improve knowledge on the metabolic pathways leading to fructan storage and degradation, carbohydrate fluxes occurring during durum wheat kernel development were analyzed. Kernels were collected at various developmental stages and quali-quantitative analysis of carbohydrates (mono- and di-saccharides, fructans, starch was performed, alongside analysis of the activities and gene expression of the enzymes involved in their biosynthesis and hydrolysis. High resolution HPAEC-PAD of fructan contained in durum wheat kernels revealed that fructan content is higher at the beginning of kernel development, when fructans with higher DP, such as bifurcose and 1,1-nystose, were mainly found. The changes in fructan pool observed during kernel maturation might be part of the signaling pathways influencing carbohydrate metabolism and storage in wheat kernels during development. During the first developmental stages fructan accumulation may contribute to make kernels more effective Suc sinks and to participate in osmotic regulation while the observed decrease in their content may mark the transition to later developmental stages, transition that is also orchestrated by changes in redox balance.

  20. Controlled production of camembert-type cheeses: part III role of the ripening microflora on free fatty acid concentrations.

    Science.gov (United States)

    Leclercq-Perlat, Marie-Noëlle; Corrieu, Georges; Spinnler, Henry-Eric

    2007-05-01

    Phenomena generating FFAs, important flavour precursors, are significant in cheese ripening. In Camembert-like cheeses, it was intended to establish the relationships between the dynamics of FFA concentrations changes and the succession of ripening microflora during ripening. Experimental Camembert-type cheeses were prepared in duplicate from pasteurised milk inoculated with Kluyveromyces lactis, Geotrichum candidum, Penicillium camemberti, and Brevibacterium aurantiacum under aseptic conditions. For each cheese and each cheesy medium, concentrations of FFAs with odd-numbered carbons, except for 9:0 and 13:0, did not change over time. For long-chain FFAs, concentrations varied with the given cheese part (rind or core). K. lactis produced only short or medium-chain FFAs during its growth and had a minor influence on caproic, caprylic, capric, and lauric acids in comparison with G. candidum, the most lipolytic of the strains used here. It generated all short or medium-chain FFAs (4:0-12:0) during its exponential and slowdown growth periods and only long-chain ones (14:0-18:0) during its stationary phase. Pen. camemberti produced more long-chain FFAs (14:0-18:0) during its sporulation. Brev. aurantiacum did not generate any FFAs. The evidence of links between specific FFAs and the growth of a given microorganism is shown.

  1. Stability Improvement of High-Pressure-Ratio Turbocharger Centrifugal Compressor by Asymmetrical Flow Control-Part II: Nonaxisymmetrical Self-Recirculation Casing Treatment.

    Science.gov (United States)

    Zheng, Xinqian; Zhang, Yangjun; Yang, Mingyang; Bamba, Takahiro; Tamaki, Hideaki

    2013-03-01

    This is part II of a two-part paper involving the development of an asymmetrical flow control method to widen the operating range of a turbocharger centrifugal compressor with high-pressure ratio. A nonaxisymmetrical self-recirculation casing treatment (SRCT) as an instance of asymmetrical flow control method is presented. Experimental and numerical methods were used to investigate the impact of nonaxisymmetrical SRCT on the surge point of the centrifugal compressor. First, the influence of the geometry of a symmetric SRCT on the compressor performance was studied by means of numerical simulation. The key parameter of the SRCT was found to be the distance from the main blade leading edge to the rear groove (S r ). Next, several arrangements of a nonaxisymmetrical SRCT were designed, based on flow analysis presented in part I. Then, a series of experiments were carried out to analyze the influence of nonaxisymmetrical SRCT on the compressor performance. Results show that the nonaxisymmetrical SRCT has a certain influence on the performance and has a larger potential for stability improvement than the traditional symmetric SRCT. For the investigated SRCT, the surge flow rate of the compressor with the nonaxisymmetrical SRCTs is about 10% lower than that of the compressor with symmetric SRCT. The largest surge margin (smallest surge flow rate) can be obtained when the phase of the largest S r is coincident with the phase of the minimum static pressure in the vicinity of the leading edge of the splitter blades.

  2. Optimal controls of building storage systems using both ice storage and thermal mass – Part II: Parametric analysis

    International Nuclear Information System (INIS)

    Hajiah, Ali; Krarti, Moncef

    2012-01-01

    Highlights: ► A detailed analysis is presented to assess the performance of thermal energy storage (TES) systems. ► Utility rates have been found to be significant in assessing the operation of TES systems. ► Optimal control strategies for TES systems can save up to 40% of total energy cost of office buildings. - Abstract: This paper presents the results of a series of parametric analysis to investigate the factors that affect the effectiveness of using simultaneously building thermal capacitance and ice storage system to reduce total operating costs (including energy and demand costs) while maintaining adequate occupant comfort conditions in buildings. The analysis is based on a validated model-based simulation environment and includes several parameters including the optimization cost function, base chiller size, and ice storage tank capacity, and weather conditions. It found that the combined use of building thermal mass and active thermal energy storage system can save up to 40% of the total energy costs when integrated optimal control are considered to operate commercial buildings.

  3. Material control in nuclear fuel fabrication facilities. Part II. Accountability, instrumentation and measurement techniques in fuel fabrication facilities

    International Nuclear Information System (INIS)

    Borgonovi, G.M.; McCartin, T.J.; McDaniel, T.; Miller, C.L.; Nguyen, T.

    1978-01-01

    This report describes the measurement techniques, the instrumentation, and the procedures used in accountability and control of nuclear materials, as they apply to fuel fabrication facilities. A general discussion is given of instrumentation and measurement techniques which are presently used being considered for fuel fabrication facilities. Those aspects which are most significant from the point of view of satisfying regulatory constraints have been emphasized. Sensors and measurement devices have been discussed, together with their interfacing into a computerized system designed to permit real-time data collection and analysis. Estimates of accuracy and precision of measurement techniques have been given, and, where applicable, estimates of associated costs have been presented. A general description of material control and accounting is also included. In this section, the general principles of nuclear material accounting have been reviewed first (closure of material balance). After a discussion of the most current techniques used to calculate the limit of error on inventory difference, a number of advanced statistical techniques are reviewed. The rest of the section deals with some regulatory aspects of data collection and analysis, for accountability purposes, and with the overall effectiveness of accountability in detecting diversion attempts in fuel fabrication facilities. A specific example of application of the accountability methods to a model fuel fabrication facility is given. The effect of random and systematic errors on the total material uncertainty has been discussed, together with the effect on uncertainty of the length of the accounting period

  4. Material control in nuclear fuel fabrication facilities. Part II. Accountability, instrumentation and measurement techniques in fuel fabrication facilities

    Energy Technology Data Exchange (ETDEWEB)

    Borgonovi, G.M.; McCartin, T.J.; McDaniel, T.; Miller, C.L.; Nguyen, T.

    1978-01-01

    This report describes the measurement techniques, the instrumentation, and the procedures used in accountability and control of nuclear materials, as they apply to fuel fabrication facilities. A general discussion is given of instrumentation and measurement techniques which are presently used being considered for fuel fabrication facilities. Those aspects which are most significant from the point of view of satisfying regulatory constraints have been emphasized. Sensors and measurement devices have been discussed, together with their interfacing into a computerized system designed to permit real-time data collection and analysis. Estimates of accuracy and precision of measurement techniques have been given, and, where applicable, estimates of associated costs have been presented. A general description of material control and accounting is also included. In this section, the general principles of nuclear material accounting have been reviewed first (closure of material balance). After a discussion of the most current techniques used to calculate the limit of error on inventory difference, a number of advanced statistical techniques are reviewed. The rest of the section deals with some regulatory aspects of data collection and analysis, for accountability purposes, and with the overall effectiveness of accountability in detecting diversion attempts in fuel fabrication facilities. A specific example of application of the accountability methods to a model fuel fabrication facility is given. The effect of random and systematic errors on the total material uncertainty has been discussed, together with the effect on uncertainty of the length of the accounting period.

  5. Multivariate approaches for stability control of the olive oil reference materials for sensory analysis - part II: applications.

    Science.gov (United States)

    Valverde-Som, Lucia; Ruiz-Samblás, Cristina; Rodríguez-García, Francisco P; Cuadros-Rodríguez, Luis

    2018-02-09

    The organoleptic quality of virgin olive oil depends on positive and negative sensory attributes. These attributes are related to volatile organic compounds and phenolic compounds that represent the aroma and taste (flavour) of the virgin olive oil. The flavour is the characteristic that can be measured by a taster panel. However, as for any analytical measuring device, the tasters, individually, and the panel, as a whole, should be harmonized and validated and proper olive oil standards are needed. In the present study, multivariate approaches are put into practice in addition to the rules to build a multivariate control chart from chromatographic volatile fingerprinting and chemometrics. Fingerprinting techniques provide analytical information without identify and quantify the analytes. This methodology is used to monitor the stability of sensory reference materials. The similarity indices have been calculated to build multivariate control chart with two olive oils certified reference materials that have been used as examples to monitor their stabilities. This methodology with chromatographic data could be applied in parallel with the 'panel test' sensory method to reduce the work of sensory analysis. © 2018 Society of Chemical Industry. © 2018 Society of Chemical Industry.

  6. A new concept for the control of a slow-extracted beam in a line with rotational optics: Part II

    CERN Document Server

    Benedikt, Michael; Pullia, M

    1999-01-01

    The current trend in hadrontherapy is towards high-precision, conformal scanning of tumours with a 'pencil' beam of light ions or protons, delivered by a synchrotron using slow extraction. The particular shape of the slow-extracted beam segment in phase space and the need to vary the beam size in a lattice with rotating optical elements create a special problem for the design of the extraction transfer line and gantry. The design concept presented in this report is based on telescope modules with integer-pi phase advances in both transverse planes. The beam size in the plane of the extraction is controlled by altering the phase advance and hence the rotation of the extracted beam segment in phase space. The vertical beam size is controlled by stepping the vertical betatron amplitude function over a range of values and passing the changed beam size from 'hand-to-hand' through the telescope modules to the various treatment rooms. In the example given, a combined phase shifter and 'stepper', at a point close to ...

  7. Assessment of air quality benefits from national air pollution control policies in China. Part I: Background, emission scenarios and evaluation of meteorological predictions

    Science.gov (United States)

    Wang, Litao; Jang, Carey; Zhang, Yang; Wang, Kai; Zhang, Qiang; Streets, David; Fu, Joshua; Lei, Yu; Schreifels, Jeremy; He, Kebin; Hao, Jiming; Lam, Yun-Fat; Lin, Jerry; Meskhidze, Nicholas; Voorhees, Scott; Evarts, Dale; Phillips, Sharon

    2010-09-01

    Under the 11th Five Year Plan (FYP, 2006-2010) for national environmental protection by the Chinese government, the overarching goal for sulfur dioxide (SO 2) controls is to achieve a total national emissions level of SO 2 in 2010 10% lower than the level in 2005. A similar nitrogen oxides (NO x) emissions control plan is currently under development and could be enforced during the 12th FYP (2011-2015). In this study, the U.S. Environmental Protection Agency (U.S.EPA)'s Community Multi-Scale Air Quality (Models-3/CMAQ) modeling system was applied to assess the air quality improvement that would result from the targeted SO 2 and NO x emission controls in China. Four emission scenarios — the base year 2005, the 2010 Business-As-Usual (BAU) scenario, the 2010 SO 2 control scenario, and the 2010 NO x control scenario—were constructed and simulated to assess the air quality change from the national control plan. The Fifth-Generation NCAR/Penn State Mesoscale Model (MM5) was applied to generate the meteorological fields for the CMAQ simulations. In this Part I paper, the model performance for the simulated meteorology was evaluated against observations for the base case in terms of temperature, wind speed, wind direction, and precipitation. It is shown that MM5 model gives an overall good performance for these meteorological variables. The generated meteorological fields are acceptable for using in the CMAQ modeling.

  8. The endocrine system controlling sexual reproduction in animals: Part of the evolutionary ancient but well conserved immune system?

    Science.gov (United States)

    De Loof, Arnold; Schoofs, Liliane; Huybrechts, Roger

    2016-01-15

    Drastic changes in hormone titers, in particular of steroid hormones, are intuitively interpreted as necessary and beneficial for optimal functioning of animals. Peaks in progesterone- and estradiol titers that accompany the estrus cycle in female vertebrates as well as in ecdysteroids at each molt and during metamorphosis of holometabolous insects are prominent examples. A recent analysis of insect metamorphosis yielded the view that, in general, a sharp rise in sex steroid hormone titer signals that somewhere in the body some tissue(s) is undergoing programmed cell death/apoptosis. Increased steroid production is part of this process. Typical examples are ovarian follicle cells in female vertebrates and invertebrates and the prothoracic gland cells, the main production site of ecdysteroids in larval insects. A duality emerges: programmed cell death-apoptosis is deleterious at the cellular level, but it may yield beneficial effects at the organismal level. Reconciling both opposites requires reevaluating the probable evolutionary origin and role of peptidic brain hormones that direct steroid hormone synthesis. Do e.g. Luteinizing Hormone in vertebrates and Prothoracicotropic Hormone (PTTH: acting through the Torso receptor) in insects still retain an ancient role as toxins in the early immune system? Does the functional link of some neuropeptides with Ca(2+)-induced apoptosis make sense in endocrine archeology? The endocrine system as a remnant of the ancient immune system is undoubtedly counterintuitive. Yet, we will argue that such paradigm enables the logical framing of many aspects, the endocrine one inclusive of both male and female reproductive physiology. Copyright © 2015 Elsevier Inc. All rights reserved.

  9. Asymmetrical Interleaved DC/DC Switching Converters for Photovoltaic and Fuel Cell Applications—Part 2: Control-Oriented Models

    Directory of Open Access Journals (Sweden)

    Sergio Ignacio Serna-Garces

    2013-10-01

    Full Text Available A previous article has presented the members of the asymmetrical interleaved dc/dc switching converters family as very appropriate candidates to interface between photovoltaic or fuel cell generators and their loads because of their reduced ripple and increased current processing capabilities. After a review of the main modeling methods suitable for high-order converters operating, as the asymmetrical interleaved converters (AIC ones, in discontinuous current conduction mode a full-order averaged model has been adapted and improved to describe the dynamic behavior of AIC. The excellent agreement between the mathematical model predictions, the switched simulations and the experimental results has allowed for satisfactory design of a linear-quadratic regulator (LQR in a fuel-cell application example, which demonstrates the usefulness of the improved control-oriented modeling approach when the switching converters operate in discontinuous conduction mode.

  10. Shallow soil moisture – ground thaw interactions and controlsPart 2: Influences of water and energy fluxes

    Directory of Open Access Journals (Sweden)

    X. J. Guan

    2010-07-01

    Full Text Available The companion paper (Guan et al., 2010 demonstrated variable interactions and correlations between shallow soil moisture and ground thaw in soil filled areas along a wetness spectrum in a subarctic Canadian Precambrian Shield landscape. From wetter to drier, these included a wetland, peatland and soil filled valley. Herein, water and energy fluxes were examined for these same subarctic study sites to discern the key controlling processes on the found patterns. Results showed the presence of surface water was the key control in variable soil moisture and frost table interactions among sites. At the peatland and wetland sites, accumulated water in depressions and flow paths maintained soil moisture for a longer duration than at the hummock tops. These wet areas were often locations of deepest thaw depth due to the transfer of latent heat accompanying lateral surface runoff. Although the peatland and wetland sites had large inundation extent, modified Péclet numbers indicated the relative influence of external and internal hydrological and energy processes at each site were different. Continuous inflow from an upstream lake into the wetland site caused advective and conductive thermal energies to be of equal importance to ground thaw. The absence of continuous surface flow at the peatland and valley sites led to dominance of conductive thermal energy over advective energy for ground thaw. The results suggest that the modified Péclet number could be a very useful parameter to differentiate landscape components in modeling frost table heterogeneity. The calculated water and energy fluxes, and the modified Péclet number provide quantitative explanations for the shallow soil moisture-ground thaw patterns by linking them with hydrological processes and hillslope storage capacity.

  11. Control of water uptake by rice ( Oryza sativa L.): role of the outer part of the root.

    Science.gov (United States)

    Ranathunge, Kosala; Steudle, Ernst; Lafitte, Renee

    2003-06-01

    A new pressure-perfusion technique was used to measure hydraulic and osmotic properties of the outer part of roots (OPR) of 30-day-old rice plants (lowland cultivar: IR64, and upland cultivar: Azucena). The OPR comprised rhizodermis, exodermis, sclerenchyma and one cortical cell layer. The technique involved perfusion of aerenchyma of segments from two different root zones (20-50 mm and 50-100 mm from the tip) at precise rates using aerated nutrient solution. The hydraulic conductivity of the OPR (Lp(OPR)=1.2x10(-6) m s(-1) MPa(-1)) was larger by a factor of 30 than the overall hydraulic conductivity (Lp(r)=4x10(-8) m s(-1) MPa(-1)) as measured by pressure chamber and root pressure probe. Low reflection coefficients were obtained for mannitol and NaCl for the OPR (sigma(sOPR)=0.14 and 0.09, respectively). The diffusional water permeability ( P(dOPR)) estimated from isobaric flow of heavy water was smaller by three orders of magnitude than the hydraulic conductivity (Lp(OPR)/ P(fOPR)). Although detailed root anatomy showed well-defined Casparian bands and suberin lamellae in the exodermis, the findings strongly indicate a predominantly apoplastic water flow in the OPR. The Lp(OPR) of heat-killed root segments increased by a factor of only 2, which is in line with the conclusion of a dominating apoplastic water flow. The hydraulic resistance of the OPR was not limiting the passage of water across the root cylinder. Estimations of the hydraulic properties of aerenchyma suggested that the endodermis was rate-limiting the water flow, although the aerenchyma may contribute to the overall resistance. The resistance of the aerenchyma was relatively low, because mono-layered cortical septa crossing the aerenchyma ('spokes') short-circuited the air space between the stele and the OPR. Spokes form hydraulic bridges that act like wicks. Low diffusional water permeabilities of the OPR suggest that radial oxygen losses from aerenchyma to medium are also low. It is concluded that

  12. Assessing the risk to green sturgeon from application of imidacloprid to control burrowing shrimp in Willapa Bay, Washington--Part II: controlled exposure studies.

    Science.gov (United States)

    Frew, John A; Grue, Christian E

    2015-11-01

    The activities of 2 species of burrowing shrimp have a negative impact on the growth and survival of oysters reared on intertidal mudflats in Willapa Bay and Grays Harbor, Washington (USA). To maintain viable harvests, oyster growers proposed the application of the neonicotinoid insecticide imidacloprid onto harvested beds for the control of burrowing shrimp. In test applications, water column concentrations of imidacloprid were relatively low and dissipated rapidly. The foraging activities of the green sturgeon (listed in the US Endangered Species Act) could result in exposure to higher, more sustained imidacloprid concentrations within sediment porewater and from the consumption of contaminated shrimp. Controlled experiments were conducted using surrogate white sturgeon to determine acute and chronic effect concentrations, to examine overt effects at more environmentally realistic concentrations and durations of exposure, and to assess chemical depuration. The 96-h median lethal concentration was 124 mg L(-1) , and the predicted 35-d no-observed-adverse-effect concentration was 0.7 mg L(-1) . No overt effects were observed following environmentally relevant exposures. Imidacloprid half-life in plasma was greater than 32 h. Measured concentrations of imidacloprid in porewater were significantly lower than the derived acute and chronic effect concentrations for white sturgeon. Exposure risk quotients were calculated using the effect concentrations and estimated environmental exposure. The resulting values were considerably below the level of concern for direct effects from either acute or chronic exposure to an endangered species. © 2015 SETAC.

  13. Intelligent control for modeling of real-time reservoir operation, part II: artificial neural network with operating rule curves

    Science.gov (United States)

    Chang, Ya-Ting; Chang, Li-Chiu; Chang, Fi-John

    2005-04-01

    To bridge the gap between academic research and actual operation, we propose an intelligent control system for reservoir operation. The methodology includes two major processes, the knowledge acquired and implemented, and the inference system. In this study, a genetic algorithm (GA) and a fuzzy rule base (FRB) are used to extract knowledge based on the historical inflow data with a design objective function and on the operating rule curves respectively. The adaptive network-based fuzzy inference system (ANFIS) is then used to implement the knowledge, to create the fuzzy inference system, and then to estimate the optimal reservoir operation. To investigate its applicability and practicability, the Shihmen reservoir, Taiwan, is used as a case study. For the purpose of comparison, a simulation of the currently used M-5 operating rule curve is also performed. The results demonstrate that (1) the GA is an efficient way to search the optimal input-output patterns, (2) the FRB can extract the knowledge from the operating rule curves, and (3) the ANFIS models built on different types of knowledge can produce much better performance than the traditional M-5 curves in real-time reservoir operation. Moreover, we show that the model can be more intelligent for reservoir operation if more information (or knowledge) is involved.

  14. Multi-Evaporator Miniature Loop Heat Pipe for Small Spacecraft Thermal Control. Part 1; New Technologies and Validation Approach

    Science.gov (United States)

    Ku, Jentung; Ottenstein, Laura; Douglas, Donya; Hoang, Triem

    2010-01-01

    Under NASA s New Millennium Program Space Technology 8 (ST 8) Project, four experiments Thermal Loop, Dependable Microprocessor, SAILMAST, and UltraFlex - were conducted to advance the maturity of individual technologies from proof of concept to prototype demonstration in a relevant environment , i.e. from a technology readiness level (TRL) of 3 to a level of 6. This paper presents the new technologies and validation approach of the Thermal Loop experiment. The Thermal Loop is an advanced thermal control system consisting of a miniature loop heat pipe (MLHP) with multiple evaporators and multiple condensers designed for future small system applications requiring low mass, low power, and compactness. The MLHP retains all features of state-of-the-art loop heat pipes (LHPs) and offers additional advantages to enhance the functionality, performance, versatility, and reliability of the system. Details of the thermal loop concept, technical advances, benefits, objectives, level 1 requirements, and performance characteristics are described. Also included in the paper are descriptions of the test articles and mathematical modeling used for the technology validation. An MLHP breadboard was built and tested in the laboratory and thermal vacuum environments for TRL 4 and TRL 5 validations, and an MLHP proto-flight unit was built and tested in a thermal vacuum chamber for the TRL 6 validation. In addition, an analytical model was developed to simulate the steady state and transient behaviors of the MLHP during various validation tests. Capabilities and limitations of the analytical model are also addressed.

  15. Pacific Northwest Laboratory annual report for 1979 to the DOE Assistant Secretary for Environment. Part 5. Environmental assessment, control, health, and safety

    Energy Technology Data Exchange (ETDEWEB)

    Baalman, R.W.; Dotson, C.W. (eds.)

    1980-02-01

    Part 5 of the 1979 Annual Report to the Department of Energy Assistant Secretary for the Environment presents Pacific Northwest Laboratory's progress on work performed for the Office of Technology Impacts, the Office of Environmental Compliance and Overview, and the Office of Health and Environmental Research. The report is in four sections, corresponding to the program elements: technology impacts, environmental control engineering, operational and environmental compliance, and human health studies. In each section, articles describe progress made during FY 1979 on individual projects.

  16. An online community improves adherence in an internet-mediated walking program. Part 1: results of a randomized controlled trial.

    Science.gov (United States)

    Richardson, Caroline R; Buis, Lorraine R; Janney, Adrienne W; Goodrich, David E; Sen, Ananda; Hess, Michael L; Mehari, Kathleen S; Fortlage, Laurie A; Resnick, Paul J; Zikmund-Fisher, Brian J; Strecher, Victor J; Piette, John D

    2010-12-17

    Approximately half of American adults do not meet recommended physical activity guidelines. Face-to-face lifestyle interventions improve health outcomes but are unlikely to yield population-level improvements because they can be difficult to disseminate, expensive to maintain, and inconvenient for the recipient. In contrast, Internet-based behavior change interventions can be disseminated widely at a lower cost. However, the impact of some Internet-mediated programs is limited by high attrition rates. Online communities that allow participants to communicate with each other by posting and reading messages may decrease participant attrition. Our objective was to measure the impact of adding online community features to an Internet-mediated walking program on participant attrition and average daily step counts. This randomized controlled trial included sedentary, ambulatory adults who used email regularly and had at least 1 of the following: overweight (body mass index [BMI] ≥ 25), type 2 diabetes, or coronary artery disease. All participants (n = 324) wore enhanced pedometers throughout the 16-week intervention and uploaded step-count data to the study server. Participants could log in to the study website to view graphs of their walking progress, individually-tailored motivational messages, and weekly calculated goals. Participants were randomized to 1 of 2 versions of a Web-based walking program. Those randomized to the "online community" arm could post and read messages with other participants while those randomized to the "no online community" arm could not read or post messages. The main outcome measures were participant attrition and average daily step counts over 16 weeks. Multiple regression analyses assessed the effect of the online community access controlling for age, sex, disease status, BMI, and baseline step counts. Both arms significantly increased their average daily steps between baseline and the end of the intervention period, but there were no

  17. Dengue, zika e chikungunya - desafios do controle vetorial frente à ocorrência das três arboviroses - Parte I

    Directory of Open Access Journals (Sweden)

    Antonio Silva Lima Neto

    2016-09-01

    Full Text Available Mesmo antes da introdução do vírus Chikungunya (CHIKV e do vírus Zika (ZIKV nas Américas e no Brasil entre 2013 e 2015, com registro de grandes epidemias(1-3, já havia consenso de que o modelo tradicional de controle vetorial não era capaz de impedir isoladamente a expansão geográfica da dengue para áreas até então indenes(4,5. Por outro lado, a comunidade acadêmica concluía que tampouco uma iniciativa global de imunização, com introdução em larga escala de vacinas contra a dengue, diminuiria consideravelmente a transmissão do vírus (DENV, quando vista dissociada de outras intervenções(6. A combinação entre um controle vetorial mais eficiente, que impacte na força de transmissão da doença, com a vacinação de grandes contingentes populacionais, que diminua a proporção de suscetíveis, parece ser uma estratégia promissora(6,7. No entanto, realisticamente, a falta de uma vacina eficaz e custo-efetiva contra os quatro sorotipos do DENV e a indisponibilidade de tratamento e imunobiológicos específicos contra o CHIKV e ZIKV ainda afirmam o protagonismo do combate ao Aedes aegipti, como estratégia central de contenção das arboviroses. Porém, o controle vetorial só terá êxito se conseguir incorporar novas tecnologias e ferramentas que possam, em articulação com as já em vigor, alcançar resultados mais satisfatórios, que comprovadamente diminuam a carga da doença e não apenas melhorem indicadores entomológicos(7. Arboviroses: a magnitude do problema A dengue é a doença viral transmitida por artrópodes (arbovirose responsável pelo maior número de casos e mortes no mundo, representando um grave problema de saúde pública de escala global(7. O aumento exponencial da incidência da doença e sua expansão geográfica impressionam, quando se sabe que no final dos anos de 1960 apenas nove países haviam registrado surtos com transmissão autóctone. Ao se saltar para 2016, a dengue é endêmica em mais de

  18. A description of a knowledge broker role implemented as part of a randomized controlled trial evaluating three knowledge translation strategies

    Directory of Open Access Journals (Sweden)

    O'Mara Linda

    2009-04-01

    Full Text Available Abstract Background A knowledge broker (KB is a popular knowledge translation and exchange (KTE strategy emerging in Canada to promote interaction between researchers and end users, as well as to develop capacity for evidence-informed decision making. A KB provides a link between research producers and end users by developing a mutual understanding of goals and cultures, collaborates with end users to identify issues and problems for which solutions are required, and facilitates the identification, access, assessment, interpretation, and translation of research evidence into local policy and practice. Knowledge-brokering can be carried out by individuals, groups and/or organizations, as well as entire countries. In each case, the KB is linked with a group of end users and focuses on promoting the integration of the best available evidence into policy and practice-related decisions. Methods A KB intervention comprised one of three KTE interventions evaluated in a randomized controlled trial. Results KB activities were classified into the following categories: initial and ongoing needs assessments; scanning the horizon; knowledge management; KTE; network development, maintenance, and facilitation; facilitation of individual capacity development in evidence informed decision making; and g facilitation of and support for organizational change. Conclusion As the KB role developed during this study, central themes that emerged as particularly important included relationship development, ongoing support, customized approaches, and opportunities for individual and organizational capacity development. The novelty of the KB role in public health provides a unique opportunity to assess the need for and reaction to the role and its associated activities. Future research should include studies to evaluate the effectiveness of KBs in different settings and among different health care professionals, and to explore the optimal preparation and training of KBs

  19. Advancements to Visualization Control System (VCS, part of UV-CDAT), a Visualization Package Designed for Climate Scientists

    Science.gov (United States)

    Lipsa, D.; Chaudhary, A.; Williams, D. N.; Doutriaux, C.; Jhaveri, S.

    2017-12-01

    Climate Data Analysis Tools (UV-CDAT, https://uvcdat.llnl.gov) is a data analysis and visualization software package developed at Lawrence Livermore National Laboratory and designed for climate scientists. Core components of UV-CDAT include: 1) Community Data Management System (CDMS) which provides I/O support and a data model for climate data;2) CDAT Utilities (GenUtil) that processes data using spatial and temporal averaging and statistic functions; and 3) Visualization Control System (VCS) for interactive visualization of the data. VCS is a Python visualization package primarily built for climate scientists, however, because of its generality and breadth of functionality, it can be a useful tool to other scientific applications. VCS provides 1D, 2D and 3D visualization functions such as scatter plot and line graphs for 1d data, boxfill, meshfill, isofill, isoline for 2d scalar data, vector glyphs and streamlines for 2d vector data and 3d_scalar and 3d_vector for 3d data. Specifically for climate data our plotting routines include projections, Skew-T plots and Taylor diagrams. While VCS provided a user-friendly API, the previous implementation of VCS relied on slow performing vector graphics (Cairo) backend which is suitable for smaller dataset and non-interactive graphics. LLNL and Kitware team has added a new backend to VCS that uses the Visualization Toolkit (VTK) as its visualization backend. VTK is one of the most popular open source, multi-platform scientific visualization library written in C++. Its use of OpenGL and pipeline processing architecture results in a high performant VCS library. Its multitude of available data formats and visualization algorithms results in easy adoption of new visualization methods and new data formats in VCS. In this presentation, we describe recent contributions to VCS that includes new visualization plots, continuous integration testing using Conda and CircleCI, tutorials and examples using Jupyter notebooks as well as

  20. A new technique for dynamic load distribution when two manipulators mutually lift a rigid object. Part 2, Derivation of entire system model and control architecture

    Energy Technology Data Exchange (ETDEWEB)

    Unseren, M.A.

    1994-04-01

    A rigid body model for the entire system which accounts for the load distribution scheme proposed in Part 1 as well as for the dynamics of the manipulators and the kinematic constraints is derived in the joint space. A technique is presented for expressing the object dynamics in terms of the joint variables of both manipulators which leads to a positive definite and symmetric inertia matrix. The model is then transformed to obtain reduced order equations of motion and a separate set of equations which govern the behavior of the internal contact forces. The control architecture is applied to the model which results in the explicit decoupling of the position and internal contact force-controlled degrees of freedom (DOF).

  1. H2 Control for the Continuous-Time Markovian Jump Linear Uncertain Systems with Partly Known Transition Rates and Input Quantization

    Directory of Open Access Journals (Sweden)

    Xin-Gang Zhao

    2013-01-01

    Full Text Available For a class of continuous-time Markovian jump linear uncertain systems with partly known transition rates and input quantization, the H2 state-feedback control design is considered. The elements in the transition rates matrix include completely known, boundary known, and completely unknown ones. First, an H2 cost index for Markovian jump linear uncertain systems is introduced; then by introducing a new matrix inequality condition, sufficient conditions are formulated in terms of linear matrix inequalities (LMIs for the H2 control of the Markovian jump linear uncertain systems. Less conservativeness is achieved than the result obtained with the existing technique. Finally, a numerical example is given to verify the validity of the theoretical results.

  2. The ash in forest fire affected soils control the soil losses. Part 2. Current and future research challenges

    Science.gov (United States)

    Pereira, Paulo; Cerdà, Artemi

    2013-04-01

    have implications on ash spatial distribution and if soil micro topography changes with time? What the factors that controls it? What it is the impact of ash in vegetation recuperation and the implications of this recover in ash spatial distribution? We need studies with better spatial and temporal resolution, especially in the immediate period after the fire, when the major spatial and temporal changes on ash distribution and impacts occur. Based on high level research conducted by Artemi Cerdà and others, our future research will be focused in these and other aspects in order to have a better knowledge about the impacts of ash on post-fire spatio-temporal erosion. Acknowledgements, Lithuanian Research Council. Project LITFIRE, Fire effects on Lithuanian soils and ecosystems (MIP-48/2011) and the research projects GL2008-02879/BTE and LEDDRA 243857. References Bodí, M., Mataix-Solera, J., Doerr, S., and Cerdà, A. 2011b. The wettability of ash from burned vegetation and its relationship to Mediterranean plant species type, burn severity and total organic carbon content. Geoderma, 160, 599-607. Cerdà, A. 1998a. Postfire dynamics of erosional processes under mediterranean climatic conditions. Z. Geomorphol., 42 (3) 373-398. Cerdà, A. 1998b. Changes in overland flow and infiltration after a rangeland fire in a Mediterranean scrubland.Hydrological Processes, 12, 1031-1042. Cerdà, A., and Doerr, S.H. 2008. The effect of ash and needle cover on surface runoff and erosion in the immediate post-fire period. Catena, 74, 256-263. Onda, Y., Dietrich W. E., and Booker, F. 2008. Evolution of overland flow after severe forest fire, Point Reyes, California, Catena, 72, 13-20. Pereira, P. Cerdà, A., Úbeda, X., Mataix-Solera, J. Arcenegui, V., Zavala, L. 2013. Modelling the impacts of wildfire on ash thickness in a short-term period, Land Degradation and Development, (In press) Pereira, P., Bodi. M., Úbeda, X., Cerdà, A., Mataix-Solera, J., Balfour, V, Woods, S. 2010. Las

  3. Sterilization of health care products - Radiation. Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices

    International Nuclear Information System (INIS)

    2006-01-01

    A sterile medical device is one that is free of viable microorganisms. International Standards, which specify requirements for validation and routine control of sterilization processes, require, when it is necessary to supply a sterile medical device, that adventitious microbiological contamination of a medical device prior to sterilization be minimized. Even so, medical devices produced under standard manufacturing conditions in accordance with the requirements for quality management systems (see, for example, ISO 13485) may, prior to sterilization, have microorganisms on them, albeit in low numbers. Such medical devices are non-sterile. The purpose of sterilization is to inactivate the microbiological contaminants and thereby transform the nonsterile medical devices into sterile ones. The kinetics of inactivation of a pure culture of microorganisms by physical and/or chemical agents used to sterilize medical devices can generally best be described by an exponential relationship between the numbers of microorganisms surviving and the extent of treatment with the sterilizing agent; inevitably this means that there is always a finite probability that a microorganism may survive regardless of the extent of treatment applied. For a given treatment, the probability of survival is determined by the number and resistance of microorganisms and by the environment in which the organisms exist during treatment. It follows that the sterility of any one medical device in a population subjected to sterilization processing cannot be guaranteed and the sterility of a processed population is defined in terms of the probability of there being a viable microorganism present on a medical device. This part of ISO 11137 describes requirements that, if met, will provide a radiation sterilization process intended to sterilize medical devices, that has appropriate microbicidal activity. Furthermore, compliance with the requirements ensures that this activity is both reliable and

  4. Exploring the physical controls of regional patterns of flow duration curves – Part 4: A synthesis of empirical analysis, process modeling and catchment classification

    Directory of Open Access Journals (Sweden)

    M. Sivapalan

    2012-11-01

    , notably the low-flow tails, are mainly controlled by catchment properties such as geology and soils. The regime behavior explains only part of the FDC; to gain a deeper understanding of the physical controls on the FDC, these extremes must be analyzed as well. Thus, to completely separate the climate controls from the catchment controls, the roles of catchment properties such as soils, geology, topography etc. must be explored in detail.

  5. DETAILS OF OPERATIONS PERFORMED BY THE REMOTE CONTROL ROBOT (CONCEPT TO THE HORIZONTAL FUEL CHANNEL DURING DECOMMISSIONING PHASE OF NUCLEAR REACTOR CALANDRIA STRUCTURE. PART II: INSIDE OPERATIONS

    Directory of Open Access Journals (Sweden)

    Constantin POPESCU

    2017-05-01

    Full Text Available The authors contribution to this paper is to present a concept solution of a remote control robot (RCR used for decommissioning of the horizontal fuel channels pressure tube in the CANDU nuclear reactor. In this paper the authors highlight few details of geometry, operations, constraints by kinematics and dynamics of the robot movement inside of the reactor fuel channel. Inside operations performed has as the main steps of dismantling process the followings: unblock and extract the channel closure plug (from End Fitting - EF, unblock and extract the channel shield plug (from Lattice Tube - LT, cut the ends of the pressure tube, extract the pressure tube and cut it in small parts, sorting and storage extracted items in the safe robot container. All steps are performed in automatic mode. The remote control robot (RCR represents a safety system controlled by sensors and has the capability to analyze any error registered and decide next activities or abort the inside decommissioning procedure in case of any risk rise in order to ensure the environmental and workers protection.

  6. Comparative Methods of Application of Wild Plant Parts on Growth and in the Control of Root Rot Fungi of Leguminous Crops

    International Nuclear Information System (INIS)

    Ikram, N.; Dawae, S.

    2016-01-01

    Present research work was carried out for the management of root rot fungi with wild plant part capsules and pellets formulation in soil. When application of pellets and capsules was carried out with Prosopis juliflora stem, leaves and flowers showed significant reduction in disease incidence and enhancement in growth and physiological parameters. Colonization of Fusarium spp., Macrophomina phaseolina and Rhizoctonia solani was completely suppressed when P. juliflora leaves pellets incorporated in soil. Physiological parameters such as chlorophyll a and b and protein were significantly increased when leaves pellets incorporated in soil at the rate of 1 percent w/w so P. juliflora leaves pellets were most effective in the control of root rot fungi and enhanced the growth of crop plants. (author)

  7. Chaos as the hub of systems dynamics. The part I-The attitude control of spacecraft by involving in the heteroclinic chaos

    Science.gov (United States)

    Doroshin, Anton V.

    2018-06-01

    In this work the chaos in dynamical systems is considered as a positive aspect of dynamical behavior which can be applied to change systems dynamical parameters and, moreover, to change systems qualitative properties. From this point of view, the chaos can be characterized as a hub for the system dynamical regimes, because it allows to interconnect separated zones of the phase space of the system, and to fulfill the jump into the desirable phase space zone. The concretized aim of this part of the research is to focus on developing the attitude control method for magnetized gyrostat-satellites, which uses the passage through the intentionally generated heteroclinic chaos. The attitude dynamics of the satellite/spacecraft in this case represents the series of transitions from the initial dynamical regime into the chaotic heteroclinic regime with the subsequent exit to the final target dynamical regime with desirable parameters of the attitude dynamics.

  8. Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices

    International Nuclear Information System (INIS)

    2007-01-01

    This part of ISO 11135 describes requirements that, if met, will provide an ethylene oxide sterilization process intended to sterilize medical devices, which has appropriate microbicidal activity. Furthermore, compliance with the requirements ensures that this activity is both reliable and reproducible so that it can be predicted, with reasonable confidence, that there is a low level of probability of there being a viable microorganism present on product after sterilization. Specification of this probability is a matter for regulatory authorities and may vary from country to country. The paper provides information on scope, normative references, terms and definitions, quality management systems, sterilizing agent characterization, process and equipment characterization, product definition, process definition, validation, routine monitoring and control, product release from sterilization and maintaining process effectiveness followed by Annex A (Determination of lethal rate of the sterilization process - Biological indicator/bioburden approach), Annex B (Conservative determination of lethal rate of the sterilization process - Overkill approach, annex C (General guidance) and a bibliography.

  9. Are clusters important in understanding the mechanisms in atmospheric pressure ionization? Part 1: Reagent ion generation and chemical control of ion populations.

    Science.gov (United States)

    Klee, Sonja; Derpmann, Valerie; Wißdorf, Walter; Klopotowski, Sebastian; Kersten, Hendrik; Brockmann, Klaus J; Benter, Thorsten; Albrecht, Sascha; Bruins, Andries P; Dousty, Faezeh; Kauppila, Tiina J; Kostiainen, Risto; O'Brien, Rob; Robb, Damon B; Syage, Jack A

    2014-08-01

    It is well documented since the early days of the development of atmospheric pressure ionization methods, which operate in the gas phase, that cluster ions are ubiquitous. This holds true for atmospheric pressure chemical ionization, as well as for more recent techniques, such as atmospheric pressure photoionization, direct analysis in real time, and many more. In fact, it is well established that cluster ions are the primary carriers of the net charge generated. Nevertheless, cluster ion chemistry has only been sporadically included in the numerous proposed ionization mechanisms leading to charged target analytes, which are often protonated molecules. This paper series, consisting of two parts, attempts to highlight the role of cluster ion chemistry with regard to the generation of analyte ions. In addition, the impact of the changing reaction matrix and the non-thermal collisions of ions en route from the atmospheric pressure ion source to the high vacuum analyzer region are discussed. This work addresses such issues as extent of protonation versus deuteration, the extent of analyte fragmentation, as well as highly variable ionization efficiencies, among others. In Part 1, the nature of the reagent ion generation is examined, as well as the extent of thermodynamic versus kinetic control of the resulting ion population entering the analyzer region.

  10. Guidelines for quality assurance and quality control of fish taxonomic data collected as part of the National Water-Quality Assessment Program

    Science.gov (United States)

    Walsh, Stephen Joseph; Meador, Michael R.

    1998-01-01

    Fish community structure is characterized by the U.S. Geological Survey's National Water-Quality Assessment (NAWQA) Program as part of a perennial, multidisciplinary approach to evaluating the physical, chemical, and biological conditions of the Nation's water resources. The objective of quality assurance and quality control of fish taxonomic data that are collected as part of the NAWQA Program is to establish uniform guidelines and protocols for the identification, processing, and archiving of fish specimens to ensure that accurate and reliable data are collected. Study unit biologists, collaborating with regional biologists and fish taxonomic specialists, prepare a pre-sampling study plan that includes a preliminary faunal list and identification of an ichthyological curation center for receiving preserved fish specimens. Problematic taxonomic issues and protected taxa also are identified in the study plan, and collecting permits are obtained in advance of sampling activities. Taxonomic specialists are selected to identify fish specimens in the field and to assist in determining what fish specimens should be sacrificed, fixed, and preserved for laboratory identification, independent taxonomic verification, and long-term storage in reference or voucher collections. Quantitative and qualitative sampling of fishes follows standard methods previously established for the NAWQA Program. Common ichthyological techniques are used to process samples in the field and prepare fish specimens to be returned to the laboratory or sent to an institutional repository. Taxonomic identifications are reported by using a standardized list of scientific names that provides nomenclatural consistency and uniformity across study units.

  11. Foot shape and its effect on functioning in Royal Australian Air Force recruits. Part 2: Pilot, randomized, controlled trial of orthotics in recruits with flat feet.

    Science.gov (United States)

    Esterman, Adrian; Pilotto, Louis

    2005-07-01

    As part of a larger study of the effect of foot shape on functioning, 47 Royal Australian Air Force recruits with flexible flat feet who were embarking on a 10-week basic training course took part in a randomized controlled trial of orthotic therapy. In particular, recruits were assigned at random to an untreated group or a group that received Australian Orthotics Laboratory, three-quarter-length, flexible, shoe inserts. The groups were assessed at baseline and week 8. Outcome measures included pain, injury, foot health, and quality of life. The untreated group (n = 22) had a greater proportion of heavier recruits than did the treated group (n = 25). There were no significant differences in outcome measures at baseline. Only one-half of the group assigned to orthotic therapy wore the orthotics most or all of the time. At the end of the trial, although the results were not statistically significant, those who were provided with orthotics and wore them had the least lower limb pain and the best general foot health and quality of life. Notably, none of the recruits who wore their orthotics most or all of the time sustained a training injury.

  12. Code HEX-Z-DMG for support of accounting for and control of nuclear material software system as part of international safeguards system at BN-350 site

    International Nuclear Information System (INIS)

    Bushmakin, A.G.; Schaefer, B.

    1999-01-01

    A code for the computation of the global neutron distribution in the three-dimensional hexagonal-z geometry and multi-group diffusion approximation was developed at BN-350 as the main part of the BN-350 accounting for and control of nuclear material software system. This software system includes: the model for stationary distributions of neutrons; the model to calculate isotope compositions changing; the model of refueling operations; To develop this system next two principal problems were solved: to make a micro cross sections library for all nuclides for the BN-350 reactor core; to develop the code for the computation of the global neutron distribution. To solve first task the twenty-six-energy-groups micro cross sections library for more than seventy nuclides was produced. To solve second task the three-dimensional hexagonal-z geometry and multi-group diffusion approximation code was developed. This code (HEX-Z-DMG) was based on the solution of the multi groups diffusion equation using the standard net approach. The series of calculations was performed in the twenty-six-energy-groups representation using this code. We compared eigenvalues (k eff ), a worth added during refueling operations, spatial and energy-group-dependent neutron flux distributions with results of calculation using other code (DIF3D). After the series of these calculations we can say that the HEX-Z-DMG code is well established to use as the part of the BN-350 accounting for and control of nuclear material software system. (author)

  13. Colorado SIP: 5 CCR 1001-13, Reg 11, Motor Vehicle Emissions Inspection Program—Part A, General Provisions, Area of Applicability, Schedules for Obtaining Certification of Emissions Control, Definitions, Exemptions, and Clean Screening/Remote Sensing

    Science.gov (United States)

    Colorado SIP: 5 CCR 1001-13, Reg 11, Motor Vehicle Emissions Inspection Program—Part A, General Provisions, Area of Applicability, Schedules for Obtaining Certification of Emissions Control, Definitions, Exemptions, and Clean Screening/Remote Sensing

  14. Seed priming with extracts of Acacia nilotica (L.) Willd. ex Delile and Sapindus mukorossi (L.) plant parts in the control of root rot fungi and growth of plants

    International Nuclear Information System (INIS)

    Rafi, H.; Dawar, S.; Zaki, M.J.

    2015-01-01

    Seed priming with plant extracts and chemicals has been used as an important growth enhancement tool in crop plants. In this research, an attempt was made to understand the mechanism of various seed priming treatments on greenhouse-grown okra (Abelmoschus esculentus (L.) Moench.), sunflower (Helianthus annuus L.), peanut (Arachis hypogaea L.) and chickpea (Cicer arietinum L.) for the control of root infecting fungi like Rhizoctonia solani (Kn), Fusarium spp. and Macrophomina phaseolina (Tassi) Goid by plant parts extracts (stem, leaves and seeds) of Acacia nilotica (L.) Willd. ex Delile and Sapindus mukorossi (L) at different time intervals (5, 10, 20, 40 minutes). Results showed significant suppression of root rot fungi and significantly enhanced the growth parameters like shoot length, root length, shoot weight and root weight. Seed-priming with A. nilotica and S. mukorossi leaves extract for 10 minutes time interval was found to be effective for the control of root rot fungi and growth of all tested leguminous and non-leguminous plants. (author)

  15. Sensory and cognitive neurophysiology in rats, Part 1: Controlled tactile stimulation and micro-ECoG recordings in freely moving animals.

    Science.gov (United States)

    Dimitriadis, George; Fransen, Anne M M; Maris, Eric

    2014-07-30

    We have developed a setup for rats that allows for controlled sensory input to an animal engaged in a task while recording both electrophysiological signals and behavioral output. We record electrophysiological signals using a novel high-density micro-electrocorticography (micro-ECoG) grid that covers almost the whole somatosensory system. We dealt with the well-known difficulty that the rat uses its whisker system in an active (motor-controlled) way to explore its environment by designing a head-mounted device that stimulates the rat's snout in a way unaffected by whisker movements. We replicate the spatial specificity of early evoked responses in somatosensory and auditory cortex. In a companion paper (Cognitive Neurophysiology in Rats, Part 2: Validation and Demonstration) we validate our setup and show for the first time that the ECoG can be used to record evoked responses in a signal that reflects neural output (spiking activity). Compared with high-density wire recordings, micro-ECoG offers a much more stable signal without readjustments, and a much better scalability. Compared with head-fixed preparations, our head-mounted stimulator allows to stay closer to the rat's natural way of collecting sensory information. For perceptual and cognitive research, our setup provides a unique combination of possibilities that cannot be achieved in other setups for rodents. Copyright © 2014 Elsevier B.V. All rights reserved.

  16. Assessment of air quality benefits from national air pollution control policies in China. Part II: Evaluation of air quality predictions and air quality benefits assessment

    Science.gov (United States)

    Wang, Litao; Jang, Carey; Zhang, Yang; Wang, Kai; Zhang, Qiang; Streets, David; Fu, Joshua; Lei, Yu; Schreifels, Jeremy; He, Kebin; Hao, Jiming; Lam, Yun-Fat; Lin, Jerry; Meskhidze, Nicholas; Voorhees, Scott; Evarts, Dale; Phillips, Sharon

    2010-09-01

    Following the meteorological evaluation in Part I, this Part II paper presents the statistical evaluation of air quality predictions by the U.S. Environmental Protection Agency (U.S. EPA)'s Community Multi-Scale Air Quality (Models-3/CMAQ) model for the four simulated months in the base year 2005. The surface predictions were evaluated using the Air Pollution Index (API) data published by the China Ministry of Environmental Protection (MEP) for 31 capital cities and daily fine particulate matter (PM 2.5, particles with aerodiameter less than or equal to 2.5 μm) observations of an individual site in Tsinghua University (THU). To overcome the shortage in surface observations, satellite data are used to assess the column predictions including tropospheric nitrogen dioxide (NO 2) column abundance and aerosol optical depth (AOD). The result shows that CMAQ gives reasonably good predictions for the air quality. The air quality improvement that would result from the targeted sulfur dioxide (SO 2) and nitrogen oxides (NO x) emission controls in China were assessed for the objective year 2010. The results show that the emission controls can lead to significant air quality benefits. SO 2 concentrations in highly polluted areas of East China in 2010 are estimated to be decreased by 30-60% compared to the levels in the 2010 Business-As-Usual (BAU) case. The annual PM 2.5 can also decline by 3-15 μg m -3 (4-25%) due to the lower SO 2 and sulfate concentrations. If similar controls are implemented for NO x emissions, NO x concentrations are estimated to decrease by 30-60% as compared with the 2010 BAU scenario. The annual mean PM 2.5 concentrations will also decline by 2-14 μg m -3 (3-12%). In addition, the number of ozone (O 3) non-attainment areas in the northern China is projected to be much lower, with the maximum 1-h average O 3 concentrations in the summer reduced by 8-30 ppb.

  17. New Methodology for Optimal Flight Control using Differential Evolution Algorithms applied on the Cessna Citation X Business Aircraft – Part 2. Validation on Aircraft Research Flight Level D Simulator

    OpenAIRE

    Yamina BOUGHARI; Georges GHAZI; Ruxandra Mihaela BOTEZ; Florian THEEL

    2017-01-01

    In this paper the Cessna Citation X clearance criteria were evaluated for a new Flight Controller. The Flight Control Law were optimized and designed for the Cessna Citation X flight envelope by combining the Deferential Evolution algorithm, the Linear Quadratic Regulator method, and the Proportional Integral controller during a previous research presented in part 1. The optimal controllers were used to reach satisfactory aircraft’s dynamic and safe flight operations with respect to the augme...

  18. Control of tomato bacterial wilt through the incorporation of aerial part of pigeon pea and crotalaria to soil Controle da murcha bacteriana do tomateiro pela incorporação da parte aérea de guandu e crotalária no solo

    Directory of Open Access Journals (Sweden)

    Suane C. Cardoso

    2006-03-01

    Full Text Available The use of organic matter that improves the physical, chemical and biological soil properties has been studied as an inducer of suppressiveness to soilborne plant pathogens. The objective of this work was to evaluate the effect of different sources and concentrations of organic matter on tomato bacterial wilt control. Two commercially available organic composts and freshly cut aerial parts of pigeon pea (Cajanus cajan and crotalaria (Crotalaria juncea were incorporated, in concentrations of 10, 20 and 30 % (v/v, into soil infested with Ralstonia solanacearum. The soil with the fresh organic matter of pigeon pea and crotalaria was incubated for 30 and 60 days before planting. Tomato seedlings of cv. Santa Clara were transplanted into polyethylene bags with 3 kg of the planting substrate (infested soil + organic matter. The wilting symptoms and percentage of flowering plants were evaluated for 45 days. All evaluated concentrations with incorporation and incubation for 30 days of aerial parts of pigeon pea and crotalaria controlled 100% tomato bacterial wilt. With 60 days of incubation, only the 10 % concentration of pigeon pea and crotalaria did not control the disease. These results suggest that soil incorporation of fresh aerial parts of pigeon pea and crotalaria is an effective method for bacterial wilt control.A utilização de materiais orgânicos que melhoram as características físicas, químicas e biológicas do solo vem sendo estudada como indutora de supressividade a fitopatógenos habitantes do solo. Este trabalho teve como objetivo avaliar o efeito de diferentes fontes e concentrações de matéria orgânica no controle da murcha bacteriana do tomateiro. Foram avaliados dois compostos orgânicos comerciais e a matéria fresca cortada da parte aérea de guandu (Cajanus cajan e de crotalária (Crotalaria juncea, nas concentrações 10, 20 e 30 % (v/v, incorporados no solo infestado com Ralstonia solanacearum. O solo que recebeu a parte

  19. Electrical, Electronic, and Electromechanical (EEE) Parts Management and Control Requirements for Space Flight Hardware and Critical Ground Support Equipment...aka... The NASA EEE Parts Standard, NASA-STD 8739.10

    Science.gov (United States)

    Majewicz, Peter; Sampson, Michael

    2016-01-01

    Describes development and content of a new NASA Standard for Electrical Electronic and Electromechanical (EEE) parts. This Standard reflects current practices, instead of changing them. Most NASA Centers utilize local documents, but there is minimal consistency across the Agency. A gap analysis clearly shows the differences that exist among the different centers and with respect to the NASA Parts Policy. Once approved, the new standard can be referenced in contracts and agreements with organizations outside of NASA.

  20. Controle de estoque de peças de reposição em local único: uma revisão da literatura Single location spare parts inventory control: the state of the art

    Directory of Open Access Journals (Sweden)

    José Roberto do Rego

    2011-01-01

    Full Text Available Estoques de peças de reposição atendem necessidades de manutenção e reparo de produtos de consumo, veículos, máquinas e equipamentos industriais, acarretando frequentemente altos custos de capital e forte impacto no nível de serviço aos clientes. A grande multiplicidade de componentes, com ciclos de vida mais curtos e baixas demandas dificultam a gestão destes estoques. Este artigo apresenta revisão da literatura sobre modelos de controle de estoques de peças de reposição em local único, abordando tanto a previsão de demanda quanto o controle de estoques nos diferentes estágios do ciclo de vida das peças. A partir do levantamento bibliográfico, identificam-se algumas lacunas referentes à decisão de estocagem ou não de um item, elaboração de pedidos iniciais e finais, na integração de modelos de previsão de demanda com o controle de estoque e também de estudos de caso na aplicação prática dos modelos.Spare parts inventory are needed for maintenance and repair of final products, vehicles, industrial machines and equipments, frequently requiring high investments and significantly affecting customer satisfaction. Inventory management is complex due to the large number of different items and low demands. This article presents a literature review on single location spare parts inventory control, embracing both demand forecasting techniques and inventory control decisions on the different life cycle stages. Overall, the literature review identified the following research opportunities on inventory management: criteria to decide to stock or not an item, how many to order in the first and the last batch, demand forecasting and inventory control models integration and case studies on real applications.

  1. Electronic symptom reporting between patient and provider for improved health care service quality: a systematic review of randomized controlled trials. part 2: methodological quality and effects.

    Science.gov (United States)

    Johansen, Monika Alise; Berntsen, Gro K Rosvold; Schuster, Tibor; Henriksen, Eva; Horsch, Alexander

    2012-10-03

    We conducted in two parts a systematic review of randomized controlled trials (RCTs) on electronic symptom reporting between patients and providers to improve health care service quality. Part 1 reviewed the typology of patient groups, health service innovations, and research targets. Four innovation categories were identified: consultation support, monitoring with clinician support, self-management with clinician support, and therapy. To assess the methodological quality of the RCTs, and summarize effects and benefits from the methodologically best studies. We searched Medline, EMBASE, PsycINFO, Cochrane Central Register of Controlled Trials, and IEEE Xplore for original studies presented in English-language articles between 1990 and November 2011. Risk of bias and feasibility were judged according to the Cochrane recommendation, and theoretical evidence and preclinical testing were evaluated according to the Framework for Design and Evaluation of Complex Interventions to Improve Health. Three authors assessed the risk of bias and two authors extracted the effect data independently. Disagreement regarding bias assessment, extraction, and interpretation of results were resolved by consensus discussions. Of 642 records identified, we included 32 articles representing 29 studies. No articles fulfilled all quality requirements. All interventions were feasible to implement in a real-life setting, and theoretical evidence was provided for almost all studies. However, preclinical testing was reported in only a third of the articles. We judged three-quarters of the articles to have low risk for random sequence allocation and approximately half of the articles to have low risk for the following biases: allocation concealment, incomplete outcome data, and selective reporting. Slightly more than one fifth of the articles were judged as low risk for blinding of outcome assessment. Only 1 article had low risk of bias for blinding of participants and personnel. We excluded 12

  2. Motorcycle Parts

    Science.gov (United States)

    1993-01-01

    An article in NASA Tech Briefs describing a vacuum bagging process for forming composite parts helped a small Oklahoma Company to improve its manufacturing process. President of Performance Extremes, Larry Ortega, and his partners make motorcycle parts from carbon/epoxy to reduce weight. Using vacuum bags, parts have a better surface and fewer voids inside. When heat used in the vacuum bag process caused deformation upon cooling, a solution found in another tech brief solved the problem. A metal plate inside the vacuum bag made for more even heat transfer. A third article described a simple procedure for repairing loose connector pins, which the company has also utilized.

  3. Towards an effective control programme of soil-transmitted helminth infections among Orang Asli in rural Malaysia. Part 1: Prevalence and associated key factors

    Directory of Open Access Journals (Sweden)

    Nasr Nabil A

    2013-01-01

    Full Text Available Abstract Background Despite the continuous efforts to improve the quality of life of Orang Asli (Aborigines communities, these communities are still plagued with a wide range of health problems including parasitic infections. The first part of this study aimed at determining the prevalence of soil-transmitted helminth (STH infections and identifying their associated factors among rural Orang Asli children. Methods A cross-sectional study was carried out among 484 Orang Asli children aged ≤ 15 years (235 females and 249 males belonging to 215 households from 13 villages in Lipis district, Pahang, Malaysia. Faecal samples were collected and examined by using formalin-ether sedimentation, Kato Katz and Harada Mori techniques. Demographic, socioeconomic, environmental and behavioural information were collected by using a pre-tested questionnaire. Results Overall, 78.1% of the children were found to be infected with one or more STH species. The prevalence of trichuriasis, ascariasis and hookworm infections were 71.7%, 37.4% and 17.6%, respectively. Almost all, three quarters and one fifth of trichuriasis, ascariasis and hookworm infections, respectively, were of moderate-to-heavy intensities. Multiple logistic regression analysis showed that age of ≥ 6 years (school-age, using unsafe water supply as a source for drinking water, absence of a toilet in the house, large family size (≥ 7 members, not washing hands before eating, and not washing hands after defecation were the key factors significantly associated with STH among these children. Conclusion This study reveals an alarmingly high prevalence of STH among Orang Asli children and clearly brings out an urgent need to implement school-based de-worming programmes and other control measures like providing a proper sanitation, as well as a treated drinking water supply and proper health education regarding good personal hygiene practices. Such an integrated control program will help

  4. Electronic symptom reporting between patient and provider for improved health care service quality: a systematic review of randomized controlled trials. part 1: state of the art.

    Science.gov (United States)

    Johansen, Monika Alise; Henriksen, Eva; Horsch, Alexander; Schuster, Tibor; Berntsen, Gro K Rosvold

    2012-10-03

    Over the last two decades, the number of studies on electronic symptom reporting has increased greatly. However, the field is very heterogeneous: the choices of patient groups, health service innovations, and research targets seem to involve a broad range of foci. To move the field forward, it is necessary to build on work that has been done and direct further research to the areas holding most promise. Therefore, we conducted a comprehensive review of randomized controlled trials (RCTs) focusing on electronic communication between patient and provider to improve health care service quality, presented in two parts. Part 2 investigates the methodological quality and effects of the RCTs, and demonstrates some promising benefits of electronic symptom reporting. To give a comprehensive overview of the most mature part of this emerging field regarding (1) patient groups, (2) health service innovations, and (3) research targets relevant to electronic symptom reporting. We searched Medline, EMBASE, PsycINFO, Cochrane Central Register of Controlled Trials, and IEEE Xplore for original studies presented in English-language articles published from 1990 to November 2011. Inclusion criteria were RCTs of interventions where patients or parents reported health information electronically to the health care system for health care purposes and were given feedback. Of 642 records identified, we included 32 articles representing 29 studies. The included articles were published from 2002, with 24 published during the last 5 years. The following five patient groups were represented: respiratory and lung diseases (12 studies), cancer (6), psychiatry (6), cardiovascular (3), and diabetes (1). In addition to these, 1 study had a mix of three groups. All included studies, except 1, focused on long-term conditions. We identified four categories of health service innovations: consultation support (7 studies), monitoring with clinician support (12), self-management with clinician support (9

  5. Towards an effective control programme of soil-transmitted helminth infections among Orang Asli in rural Malaysia. Part 2: Knowledge, attitude, and practices

    Directory of Open Access Journals (Sweden)

    Nasr Nabil A

    2013-01-01

    Full Text Available Abstract Background In the first part of this study, we investigated the prevalence and associated key factors of soil-transmitted helminth (STH infections among Orang Asli children in rural Malaysia; an alarming high prevalence and five key factors significantly associated with infections were reported. Part 2 of this study aims to evaluate the knowledge, attitude and practices (KAP on STH infections among Orang Asli in Peninsular Malaysia. Methods A cross-sectional study was carried out among 215 households from 13 villages in Lipis district, Pahang, Malaysia. Demographic and socioeconomic information of the participants and their KAP on STH were collected by using a pre-tested questionnaire. Results Overall, 61.4% of the participants had prior knowledge about intestinal helminths with a lack of knowledge on the transmission (28.8%, signs and symptoms (29.3% as well as the prevention (16.3%. Half of the respondents considered STH as harmful, while their practices to prevent infections were still inadequate. Significant associations between the KAP and age, gender, educational and employment status, family size, and household monthly income were reported. Moreover, significantly lower prevalence of STH infections was reported among children of respondents who wear shoes/slippers when outside the house (72.8%; 95% CI= 62.6, 80.5 vs 87.0%; 95% CI= 81.4, 91.1, wash their hands before eating (32.4%; 95% CI= 24.3, 42.2 vs 51.4%; 95% CI= 44.7, 60.1, and wash their hands after defecation (47.8%; 95% CI= 35.7, 57.1 vs 69.2%; 95% CI= 63.7, 78.7 as compared to their counterparts. Multiple logistic regression analysis indicated that the educational level of the respondents was the most important factor significantly associated with the KAP on STH among this population. Conclusion This study reveals inadequate knowledge, attitude and practices on STH infections among Orang Asli in rural Malaysia. Hence, there is a great need for a proper health education

  6. Thermal treatment of stabilized air pollution control residues in a waste incinerator pilot plant. Part 2: Leaching characteristics of bottom ashes.

    Science.gov (United States)

    Baun, Dorthe L; Christensen, Thomas H; Bergfeldt, Brita; Vehlow, Jürgen; Mogensen, Erhardt P B

    2004-02-01

    With the perspective of generating only one solid residue from waste incineration, co-feeding of municipal solid waste and air pollution control residues stabilized by the Ferrox process was investigated in the TAMARA pilot plant incinerator as described in Bergfeldt et al. (Waste Management Research, 22, 49-57, 2004). This paper reports on leaching from the combined bottom ashes. Batch leaching test, pH-static leaching tests, availability tests and column leaching tests were used to characterize the leaching properties. The leaching properties are key information in the context of reuse in construction or in landfilling of the combined residue. In general, the combined bottom ashes had leaching characteristics similar to the reference bottom ash, which contained no APC residue. However, As and Pb showed slightly elevated leaching from the combined bottom ashes, while Cr showed less leaching. The investigated combined bottom ashes had contents of metals comparable to what is expected at steady state after continuous co-feeding of APC residues. Only Cd and Pb were partly volatilized (30-40%) during the incineration process and thus the combined bottom ashes had lower contents of Cd and Pb than expected at steady state. Furthermore, a major loss of Hg was, not surprisingly, seen and co-feeding of Ferrox-products together with municipal solid waste will require dedicated removal of Hg in the flue gas to prevent a build up of Hg in the system. In spite of this, a combined single solid residue from waste incineration seems to be a significant environmental improvement to current technology.

  7. Exploring the physical controls of regional patterns of flow duration curves – Part 3: A catchment classification system based on regime curve indicators

    Directory of Open Access Journals (Sweden)

    M. Sivapalan

    2012-11-01

    Full Text Available Predictions of hydrological responses in ungauged catchments can benefit from a classification scheme that can organize and pool together catchments that exhibit a level of hydrologic similarity, especially similarity in some key variable or signature of interest. Since catchments are complex systems with a level of self-organization arising from co-evolution of climate and landscape properties, including vegetation, there is much to be gained from developing a classification system based on a comparative study of a population of catchments across climatic and landscape gradients. The focus of this paper is on climate seasonality and seasonal runoff regime, as characterized by the ensemble mean of within-year variation of climate and runoff. The work on regime behavior is part of an overall study of the physical controls on regional patterns of flow duration curves (FDCs, motivated by the fact that regime behavior leaves a major imprint upon the shape of FDCs, especially the slope of the FDCs. As an exercise in comparative hydrology, the paper seeks to assess the regime behavior of 428 catchments from the MOPEX database simultaneously, classifying and regionalizing them into homogeneous or hydrologically similar groups. A decision tree is developed on the basis of a metric chosen to characterize similarity of regime behavior, using a variant of the Iterative Dichotomiser 3 (ID3 algorithm to form a classification tree and associated catchment classes. In this way, several classes of catchments are distinguished, in which the connection between the five catchments' regime behavior and climate and catchment properties becomes clearer. Only four similarity indices are entered into the algorithm, all of which are obtained from smoothed daily regime curves of climatic variables and runoff. Results demonstrate that climate seasonality plays the most significant role in the classification of US catchments, with rainfall timing and climatic aridity index

  8. Randomized controlled within-subject evaluation of digital and conventional workflows for the fabrication of lithium disilicate single crowns. Part I: digital versus conventional unilateral impressions.

    Science.gov (United States)

    Benic, Goran I; Mühlemann, Sven; Fehmer, Vincent; Hämmerle, Christoph H F; Sailer, Irena

    2016-11-01

    Trials comparing the overall performance of fully digital and conventional workflows in reconstructive dentistry are needed. The purpose of the first part of this randomized controlled clinical trial was to determine whether optical impressions produce different results from conventional impressions with respect to time efficiency and patient and operator perceptions of the clinical workflow. Three digital impressions and 1 conventional impression were made in each of 10 participants according to a randomly generated sequence. The digital systems were Lava COS, iTero, and Cerec Bluecam. The conventional impression was made with the closed-mouth technique and polyvinyl siloxane material. The time needed for powdering, impressions, and interocclusal record was recorded. Patient and clinician perceptions of the procedures were rated by means of visual analog scales. The paired t test with Bonferroni correction was applied to detect differences (α=.05/6=.0083). The mean total working time ±standard deviation amounted to 260 ±66 seconds for the conventional impression, 493 ±193 seconds for Lava, 372 ±126 seconds for iTero, and 357 ±55 seconds for Cerec. The total working time for the conventional impression was significantly lower than that for Lava and Cerec. With regard to the working time without powdering, the differences between the methods were not statistically significant. The patient rating (very uncomfortable=0; comfortable=100) measured 61 ±34 for conventional impression, 71 ±18 for Lava, 66 ±20 for iTero, and 48 ±18 for Cerec. The differences were not statistically significant. The clinician rating (simple=0; very difficult=100) was 13 ±13 for the conventional impression, 54 ±27 for Lava, 22 ±11 for iTero, and 36 ±23 for Cerec. The differences between the conventional impression and Lava and between iTero and Lava were statistically significant. The conventional impression was more time-effective than the digital impressions. In terms of

  9. Regional intercomparison for quality control of radioassays used in thyroid studies. Part of a coordinated programme on quality control of techniques in in-vitro assay of thyroid related hormones

    International Nuclear Information System (INIS)

    Fiori, A.M.

    1983-01-01

    The project dealt with serious variabilities of the results of the radioimmunoassay (RIA) technique presented by different laboratories. The educational purpose of the project was to get users of RIA methods to become aware of the necessity of rigorous internal and external quality control practice. Two hundred and four sera aliquots were distributed among the participants of the project. The first batch consisted of 60 tubes, which were frozen. All others were lyophilized. The first batch consisted of pooled sera with low and high concentrations of T3 and T4, and unknown concentration of TSH. The second and third batches consisted of aliquots of normal sera for T3, T4 and TSH. The fourth batch consisted of coded aliquots of high and low concentrations of T3, T4 and TSH. All data from the participants (laboratories represented the Southern Region of Brazil and Uruguay) were collected and analyzed statistically; a special computer programme was developed for that purpose. Quarterly reports were sent to each laboratory with comments and suggestions aiming at the improvement of the performance of the laboratory in question. A high degree of irregularity in the first reporting results was observed. Individual values for T3 ranged from 0 to 176 nanog/dl with a coefficient of variation of 36.5%. Values for T4 ranged from 3.99 to 7.17 microg/dl with a coefficient of variation of 9.5%. Values for TSH ranged from 0 to 6.71 microU/dl with a coefficient of variation of 75.6%. The variability of results in different laboratories is probably caused by several reasons such as different kit's manufacturers, different standards, different antibody preparation, different separation methods. The educational part of the project seems to be rather successful. The performance of laboratories improved with time. This also demonstrates the need for intra-laboratory quality control

  10. Reexamination of Color Vision Standards, Part I: Status of Color Use in ATC Displays and Demography of Color-Deficit Controllers

    National Research Council Canada - National Science Library

    Xing, Jing; Schroeder, David J

    2006-01-01

    This report describes the status of color use in current air traffic control (ATC) displays. It represents the first step in an effort to reexamine the color vision standards for air traffic controllers...

  11. New Methodology for Optimal Flight Control Using Differential Evolution Algorithms Applied on the Cessna Citation X Business Aircraft – Part 1. Design and Optimization

    OpenAIRE

    Yamina BOUGHARI; Georges GHAZI; Ruxandra Mihaela BOTEZ; Florian THEEL

    2017-01-01

    Setting the appropriate controllers for aircraft stability and control augmentation systems are complicated and time consuming tasks. As in the Linear Quadratic Regulator method gains are found by selecting the appropriate weights or as in the Proportional Integrator Derivative control by tuning gains. A trial and error process is usually employed for the determination of weighting matrices, which is normally a time consuming procedure. Flight Control Law were optimized and designed by combin...

  12. A Low-Intensity Mobile Health Intervention With and Without Health Counseling for Persons With Type 2 Diabetes, Part 1: Baseline and Short-Term Results From a Randomized Controlled Trial in the Norwegian Part of RENEWING HEALTH.

    Science.gov (United States)

    Torbjørnsen, Astrid; Jenum, Anne Karen; Småstuen, Milada Cvancarova; Arsand, Eirik; Holmen, Heidi; Wahl, Astrid Klopstad; Ribu, Lis

    2014-12-11

    Self-management support for people with type 2 diabetes is essential in diabetes care. Thus, mobile health technology with or without low-intensity theory-based health counseling could become an important tool for promoting self-management. The aim was to evaluate whether the introduction of technology-supported self-management using the Few Touch Application (FTA) diabetes diary with or without health counseling improved glycated hemoglobin (HbA1c) levels, self-management, behavioral change, and health-related quality of life, and to describe the sociodemographic, clinical, and lifestyle characteristics of the participants after 4 months. A 3-armed randomized controlled trial was conducted in Norway during 2011-2013. In the 2 intervention groups, participants were given a mobile phone for 1 year, which provided access to the FTA diary, a self-help tool that recorded 5 elements: blood glucose, food habits, physical activity, personal goal setting, and a look-up system for diabetes information. One of the intervention groups was also offered theory-based health counseling with a specialist diabetes nurse by telephone for 4 months from baseline. Both intervention groups and the control group were provided usual care according to the national guidelines. Adults with type 2 diabetes and HbA1c ≥7.1% were included (N=151). There were 3 assessment points: baseline, 4 months, and 1 year. We report the short-term findings after 4 months. HbA1c was the primary outcome and the secondary outcomes were self-management (Health Education Impact Questionnaire, heiQ), behavioral change (diet and physical activity), and health-related quality of life (SF-36 questionnaire). The data were analyzed using univariate methods (ANOVA), multivariate linear, and logistic regression. Data were analyzed from 124 individuals (attrition rate was 18%). The groups were well balanced at baseline. There were no differences in HbA1c between groups after 4 months, but there was a decline in all

  13. Multiple part feeding

    DEFF Research Database (Denmark)

    Hvilshøj, Mads; Bøgh, Simon; Nielsen, Oluf Skov

    2012-01-01

    " is capable of successfully servicing four part feeders in three production cells using command signals from an Open Process Control (OPC) server. Furthermore, the paper presents future research and development suggestions for AIMM, which contributes to near-term industrial maturation and implementation...

  14. New Methodology for Optimal Flight Control Using Differential Evolution Algorithms Applied on the Cessna Citation X Business Aircraft – Part 1. Design and Optimization

    Directory of Open Access Journals (Sweden)

    Yamina BOUGHARI

    2017-06-01

    Full Text Available Setting the appropriate controllers for aircraft stability and control augmentation systems are complicated and time consuming tasks. As in the Linear Quadratic Regulator method gains are found by selecting the appropriate weights or as in the Proportional Integrator Derivative control by tuning gains. A trial and error process is usually employed for the determination of weighting matrices, which is normally a time consuming procedure. Flight Control Law were optimized and designed by combining the Deferential Evolution algorithm, the Linear Quadratic Regulator method, and the Proportional Integral controller. The optimal controllers were used to reach satisfactory aircraft’s dynamic and safe flight operations with respect to the augmentation systems’ handling qualities, and design requirements for different flight conditions. Furthermore the design and the clearance of the controllers over the flight envelope were automated using a Graphical User Interface, which offers to the designer, the flexibility to change the design requirements. In the aim of reducing time, and costs of the Flight Control Law design, one fitness function has been used for both optimizations, and using design requirements as constraints. Consequently the Flight Control Law design process complexity was reduced by using the meta-heuristic algorithm.

  15. (segunda parte

    Directory of Open Access Journals (Sweden)

    José María Oliva-Martínez

    2004-01-01

    Full Text Available Este trabajo es la continuación de otro anterior (Oliva, 2004, ambos dedicados al estudio de la importancia del pensamiento analógico en la construcción histórica de la noción de fuerza gravitatoria y del modelo de Sistema Solar. En aquella ocasión analizamos dicho papel durante el período comprendido desde las antiguas civilizaciones hasta llegar a la revolución copernicana con científicos como Copérnico, Gilbert, Kepler o el propio Galileo. En esta segunda parte, se continúa con algunos de los razonamientos analógicos proporcionados desde la vertiente mecanicista, capitaneada por Descartes y desde la tradición subsiguiente que se desarrolló en línea con la utilización del método de la analogía como criterio argumentativo (Huyghens, Hooke, Bernoulli, etc.. Dedicamos asimismo un capítulo aparte a la figura de Newton, quien continúa con dicha tradición en su intento de explicar la naturaleza de la gravitación. Finalmente se procede, a modo de síntesis, a realizar una clasificación de distintos tipos de razonamientos analógicos aportados en el desarrollo histórico en torno a estos temas, estudiando el papel científico y divulgativo de cada uno

  16. NF EN ISO 11137-1, July 2006. Sterilization of health care products - Irradiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices

    International Nuclear Information System (INIS)

    2006-01-01

    This part of the ISO 11137 standard specifies requirements for the development, validation and routine control of a radiation sterilization process for medical devices. Although the scope of this part of the ISO 11137 standard is limited to medical devices, it specifies requirements and provides guidance that may be applicable to other products and equipment. This part of the international standard covers radiation processes employing irradiators using the radionuclide 60 Co or 137 Cs, a beam from an electron generator or a beam from an X-ray generator. This part of the international standard does not: - specify requirements for development, validation and routine control of a process for inactivating the causative agents of spongiform encephalopathies such as scrapie, bovine spongiform encephalopathy and Creutzfeldt-Jakob disease; - detail specified requirements for designating a medical device as sterile; - specify a quality management system for the control of all stages of production of medical devices; - specify requirements for occupational safety associated with the design and operation of irradiation facilities; - specify requirements for the sterilization of used or reprocessed devices

  17. A three-phase to three-phase series-resonant power converter with optimal input current waveforms, Part I: control strategy

    NARCIS (Netherlands)

    Huisman, H.

    1988-01-01

    A control strategy for multiphase-input multiphase-output AC to AC series-resonant (SR) power converters is presented. After reviewing some basics in SR power converters, a hierarchy of control mechanisms is presented, together with their respective theoretical backgrounds and practical limitations.

  18. Investigation of Relative Time Constant Influence of Inertial Part of Superheater on Quality of Steam Temperature Control Behind Boiler in Broad Band of Loading Variations

    Directory of Open Access Journals (Sweden)

    G. T. Kulakov

    2008-01-01

    Full Text Available The paper is devoted to computational investigation of influence relative time constant of an object which changes in broad band on quality of steam temperature control behind a boiler with due account of value of regulating action in the system with PI- and PID- regulator. The simulation has been based on a single-loop automatic control system (ACS. It has been revealed that the less value of the relative time constant of an object leads to more integral control error in system with PID- regulator while operating external ACS perturbation. Decrease of numerical value of relative time constant of an object while operating external perturbation causes decrease of relative time concerning appearance of maximum dynamic control error from common relative control time.

  19. Part I. Application of pulse polarography and pulse anodic stripping to the determination of selected heavy metals in natural waters. Part II. Application of controlled potential coulometric techniques to the determination of uranium

    International Nuclear Information System (INIS)

    Crosmun, S.T.

    1977-06-01

    The use of a thin mercury film wax-impregnated graphite electrode for the simultaneous determination of cadmium, lead and zinc in an acetate buffer by differential pulse anodic stripping voltammetry is described. Optimal instrumental parameters for maximum resolution and sensitivity for simultaneous analysis of these three elements in natural waters are discussed. The interference of copper with the determination of zinc is investigated in detail. An optimal mercury film thickness for this electrode is suggested. A method utilizing differential pulse polarography for the determination of chromium (VI) in natural water is described. Additions of 0.62 μg Cu(II) ml -1 and 0.55 μg Fe(III) ml -1 did not interfere with the determination of 0.050 μg Cr(VI) ml -1 . The natural water samples containing Cr(VI) were buffered to approximately pH 7 with 0.1 M ammonium acetate and 0.005 M ethylenediamine and analyzed. Natural water samples of chromium from 0.035 μg to 2.0 μg.ml -1 may be analyzed directly without further preparation. The detection limit is 0.010 μg.ml -1 . A novel, highly efficient cell with integral stirrer for controlled potential coulometry is described. This cell was used to demonstrate the feasibility of determining uranium (VI) by predictive coulometry. A PDP 8/I minicomputer was used to predict the coulometric endpoint with high accuracy within 2.5 minutes in a titration which normally takes about 10 minutes. This technique was shown to yield acceptable results even in the presence of an interfering phosphate matrix

  20. Quality-control analytical methods: endotoxins: essential testing for pyrogens in the compounding laboratory, part 3: a simplified endotoxin test method for compounded sterile preparations.

    Science.gov (United States)

    Cooper, James F

    2011-01-01

    The first two parts of the IJPC series on endotoxin testing explained the nature of pyrogenic contamination and described various Limulus amebocyte lysate methods for detecting and measuring endotoxin levels with the bacterial endotoxin test described in the United States Pharmacopeia. This third article in that series describes the endotoxin test that is simplest to permorm for pharmacists who prefer to conduct an endotoxin assa at the time of compounding in the pharmacy setting.

  1. UNDERTAKING POSITIVE CONTROL STUDIES AS PART OF DEVELOPMENTAL NEUROTOXICITY TESTING: A REPORT FROM THE ILSI RESEARCH FOUNDATION/RISK SCIENCE INSTITUTE EXPERT WORKING GROUP ON NEURODEVELOPMENTAL ENDPOINTS

    Science.gov (United States)

    Developmental neurotoxicity testing involves functional and neurohistological assessments in offspring during and following maternal and/or neonatal exposure. Data from positive control studies are an integral component in developmental neurotoxicity risk assessments. Positive ...

  2. A Systematic Review of Surgical Randomized Controlled Trials: Part 2. Funding Source, Conflict of Interest, and Sample Size in Plastic Surgery.

    Science.gov (United States)

    Voineskos, Sophocles H; Coroneos, Christopher J; Ziolkowski, Natalia I; Kaur, Manraj N; Banfield, Laura; Meade, Maureen O; Chung, Kevin C; Thoma, Achilleas; Bhandari, Mohit

    2016-02-01

    The authors examined industry support, conflict of interest, and sample size in plastic surgery randomized controlled trials that compared surgical interventions. They hypothesized that industry-funded trials demonstrate statistically significant outcomes more often, and randomized controlled trials with small sample sizes report statistically significant results more frequently. An electronic search identified randomized controlled trials published between 2000 and 2013. Independent reviewers assessed manuscripts and performed data extraction. Funding source, conflict of interest, primary outcome direction, and sample size were examined. Chi-squared and independent-samples t tests were used in the analysis. The search identified 173 randomized controlled trials, of which 100 (58 percent) did not acknowledge funding status. A relationship between funding source and trial outcome direction was not observed. Both funding status and conflict of interest reporting improved over time. Only 24 percent (six of 25) of industry-funded randomized controlled trials reported authors to have independent control of data and manuscript contents. The mean number of patients randomized was 73 per trial (median, 43, minimum, 3, maximum, 936). Small trials were not found to be positive more often than large trials (p = 0.87). Randomized controlled trials with small sample size were common; however, this provides great opportunity for the field to engage in further collaboration and produce larger, more definitive trials. Reporting of trial funding and conflict of interest is historically poor, but it greatly improved over the study period. Underreporting at author and journal levels remains a limitation when assessing the relationship between funding source and trial outcomes. Improved reporting and manuscript control should be goals that both authors and journals can actively achieve.

  3. Part I: Hazard, sensorial and economic implications of applying the hazard analysis and critical control points to irradiated ready-to-eat meals

    International Nuclear Information System (INIS)

    Haruvy, Y.F.

    2009-01-01

    The classical methodology of hazard analysis and critical control points focuses on hazards and related implications. A new methodology is suggested here, one that attempts at a systematic simultaneous assessment of safety hazards, sensorial failures and economic risks, and the critical control points necessary for their early detection and/or prevention of their potential outcomes. The new methodology also attempts to combine the three parameters to form a qualitative prioritization of the numerous control points and to screen those that can be cost effective for implementation. This is demonstrated in this paper for a complex product, i.e. radiation sterilized ready-to-eat meals. Hence, a fourth parameter specific to this product - the radiation specific pitfall - is also assessed. The advantages and drawbacks of the combined assessment methodology are described and their overall possible impact is discussed. Finally, the suggested combined assessment and control system for ensuring the safety and quality of food can provide a more structured and critical approach to control identified hazards, compared with that achievable by traditional inspection and quality control procedures. It has the potential to identify areas of concern where failure has not yet been experienced, making it particularly useful for new operations and products thereafter. (author)

  4. The safety, immunogenicity, and acceptability of inactivated influenza vaccine delivered by microneedle patch (TIV-MNP 2015): a randomised, partly blinded, placebo-controlled, phase 1 trial.

    Science.gov (United States)

    Rouphael, Nadine G; Paine, Michele; Mosley, Regina; Henry, Sebastien; McAllister, Devin V; Kalluri, Haripriya; Pewin, Winston; Frew, Paula M; Yu, Tianwei; Thornburg, Natalie J; Kabbani, Sarah; Lai, Lilin; Vassilieva, Elena V; Skountzou, Ioanna; Compans, Richard W; Mulligan, Mark J; Prausnitz, Mark R

    2017-08-12

    Microneedle patches provide an alternative to conventional needle-and-syringe immunisation, and potentially offer improved immunogenicity, simplicity, cost-effectiveness, acceptability, and safety. We describe safety, immunogenicity, and acceptability of the first-in-man study on single, dissolvable microneedle patch vaccination against influenza. The TIV-MNP 2015 study was a randomised, partly blinded, placebo-controlled, phase 1, clinical trial at Emory University that enrolled non-pregnant, immunocompetent adults from Atlanta, GA, USA, who were aged 18-49 years, naive to the 2014-15 influenza vaccine, and did not have any significant dermatological disorders. Participants were randomly assigned (1:1:1:1) to four groups and received a single dose of inactivated influenza vaccine (fluvirin: 18 μg of haemagglutinin per H1N1 vaccine strain, 17 μg of haemagglutinin per H3N2 vaccine strain, and 15 μg of haemagglutinin per B vaccine strain) (1) by microneedle patch or (2) by intramuscular injection, or received (3) placebo by microneedle patch, all administered by an unmasked health-care worker; or received a single dose of (4) inactivated influenza vaccine by microneedle patch self-administered by study participants. A research pharmacist prepared the randomisation code using a computer-generated randomisation schedule with a block size of 4. Because of the nature of the study, participants were not masked to the type of vaccination method (ie, microneedle patch vs intramuscular injection). Primary safety outcome measures are the incidence of study product-related serious adverse events within 180 days, grade 3 solicited or unsolicited adverse events within 28 days, and solicited injection site and systemic reactogenicity on the day of study product administration through 7 days after administration, and secondary safety outcomes are new-onset chronic illnesses within 180 days and unsolicited adverse events within 28 days, all analysed by intention to treat

  5. Extending the Constant Power Speed Range of the Brushless DC Motor through Dual Mode Inverter Control -- Part I: Theory and Simulation

    International Nuclear Information System (INIS)

    Lawler, J.S.

    2001-01-01

    An inverter topology and control scheme has been developed that can drive low-inductance, surface-mounted permanent magnet motors over the wide constant power speed range required in electric vehicle applications. This new controller is called the dual-mode inverter control (DMIC)[1]. The DMIC can drive either the Permanent Magnet Synchronous Machine (PMSM) with sinusoidal back emf, or the brushless dc machine (BDCM) with trapezoidal emf in the motoring and regenerative braking modes. In this paper we concentrate on the BDCM under high-speed motoring conditions. Simulation results show that if all motor and inverter loss mechanisms are neglected, the constant power speed range of the DMIC is infinite. The simulation results are supported by closed form expressions for peak and rms motor current and average power derived from analytical solution to the differential equations governing the DMIC/BDCM drive for the lossless case. The analytical solution shows that the range of motor inductance that can be accommodated by the DMIC is more than an order of magnitude such that the DMIC is compatible with both low- and high-inductance BDCMs. Finally, method is given for integrating the classical hysteresis band current control, used for motor control below base speed, with the phase advance of DMIC that is applied above base speed. The power versus speed performance of the DMIC is then simulated across the entire speed range

  6. Radiation protection at the RA nuclear reactor in 1987, Part II.a. Control of radioactivity in the environment of the RA nuclear reactor (precipitation, fallout, water, soil, plants, fruit)

    International Nuclear Information System (INIS)

    Martic, M.; Ajdacic, N.; Jovanovic, J.

    1987-01-01

    Control of radioactivity in the biosphere in the vicinity of the RA reactor is part of the radioactivity control done regularly for the whole territory of the Vinca Institute. According to the measurements during 1987 it was found that the total contamination of the precipitation was highest in January compared to the period before Chernobylsk accident. Mean monthly value of the total beta cavity was highest in April 5.41 times higher than the relevant value in 1986. This is a preliminary report, the measurement data will be presented after after analysis in the annual report [sr

  7. El control del cuerpo y el alma en la sexta parte de la insoportable levedad del ser: Kundera, Eriúgena y Agustín

    OpenAIRE

    Cuenca Almenar, Salvador

    2012-01-01

    Se analiza la relación entre un fragmento de la sexta parte de La insoportable levedad del ser de Milan Kundera y los dos textos que le sirven de fuente: el Peri physeon de Escoto Eriúgena y el De civitate Dei de Agustín de Hipona. Los tres fragmentos analizados en este artículo mantienen una relación de copresencia llamada “alusión” por Genette. Se defiende que el paso de Kundera no es plenamente comprensible sin la intelección de sus fuentes. El problema conceptual desarrollado por los tres...

  8. Contributions of the CEA-Valduc Centre control to the understanding of the transfers of atmospheric tritiated water into the different parts of the environment

    International Nuclear Information System (INIS)

    Guetat, P.; Vichot, L.; Tognelli, A.

    2009-01-01

    After a description of the geological environment of the Valduc Centre dedicated to tritium purification and tritiated waste processing and storage, this document presents the assessment of quantities of tritiated water released by the Valduc Centre and of their evolution in the hydro-geological environment. It provides in situ macroscopically observed data on the transfer mechanisms of water into the different parts of the environment and into the food chain by means. This is made possible by the exceptional traceability of tritiated water. Finally, a comparison between computational models and experimental measurements is given

  9. Metabolites from nematophagous fungi and nematicidal natural products from fungi as alternatives for biological control. Part II: metabolites from nematophagous basidiomycetes and non-nematophagous fungi.

    Science.gov (United States)

    Degenkolb, Thomas; Vilcinskas, Andreas

    2016-05-01

    In this second section of a two-part mini-review article, we introduce 101 further nematicidal and non-nematicidal secondary metabolites biosynthesized by nematophagous basidiomycetes or non-nematophagous ascomycetes and basidiomycetes. Several of these compounds have promising nematicidal activity and deserve further and more detailed analysis. Thermolides A and B, omphalotins, ophiobolins, bursaphelocides A and B, illinitone A, pseudohalonectrins A and B, dichomitin B, and caryopsomycins A-C are excellent candidates or lead compounds for the development of biocontrol strategies for phytopathogenic nematodes. Paraherquamides, clonostachydiol, and nafuredins offer promising leads for the development of formulations against the intestinal nematodes of ruminants.

  10. Environmental charging of spacecraft-tests of thermal control materials for use on the global positioning system flight space vehicle. Part 2: Specimen 6 to 9

    Science.gov (United States)

    Stevens, N. J.; Berkopec, F. D.; Blech, R. A.

    1976-01-01

    The NASA/USAF program on the Environmental Charging of Spacecraft Surfaces consists, in part, of experimental efforts directed toward evaluating the response of materials to the environmental charged particle flux. Samples of thermal blankets of the type to be used on the Global Positioning System Flight Space Vehicles were tested to determine their response to electron flux. The primary result observed was that no discharges were obtained with the quartz-fiber-fabric-covered multilayer insulation specimen. The taped aluminized polyester grounding system used on all specimens did not appear to grossly deteriorate with time; however, the specimens require specific external pressure to maintain constant grounding system resistance.

  11. Development, preparation and control of sup(99m)Tc or sup(113m)In labelled stannous hydroxide radiopharmaceuticals. Part of a coordinated programme on radiopharmaceuticals

    International Nuclear Information System (INIS)

    Alvarez Cervera, J.

    1975-01-01

    The preparation of different sup(99m)Tc and sup(113m)In radiopharmaceuticals using stannous chloride was investigated. Chemical and radiochemical procedures for the quality control of these preparations were studied. Toxicity and biological controls of the preparation were carried out. Procedures for the preparation and control of the following radiopharmaceuticals have been standardized by the authors; albumin macroaggregates labelled with sup(99m)Tc, sup(113m)In and other isotopes for lung scanning; albumin microspheres labelled with sup(99m)Tc for lung scanning; sup(99m)Tc or sup(113m)In-labelled stannous hydroxide colloid for liver scanning; sup(99m)Tc-stannous phytate for liver scanning; sup(99m)Tc-Sn-dextrose, a new radiopharmaceutical which has been proposed by the authors and is now used in Mexico for renal and cerebral scanning and sup(99m)Tc-Sn pyrophosphate and diphosphonate for bone scanning

  12. Feasibility study of the university of Utah TRIGA reactor power upgrade - Part I: Neutronics-based study in respect to control rod system requirements and design

    Directory of Open Access Journals (Sweden)

    Ćutić Avdo

    2013-01-01

    Full Text Available We present a summary of extensive studies in determining the highest achievable power level of the current University of Utah TRIGA core configuration in respect to control rod requirements. Although the currently licensed University of Utah TRIGA power of 100 kW provides an excellent setting for a wide range of experiments, we investigate the possibility of increasing the power with the existing fuel elements and core structure. Thus, we have developed numerical models in combination with experimental procedures so as to assess the potential maximum University of Utah TRIGA power with the currently available control rod system and have created feasibility studies for assessing new core configurations that could provide higher core power levels. For the maximum determined power of a new University of Utah TRIGA core arrangement, a new control rod system was proposed.

  13. Interim report on the state-of-the-art of solid-state motor controllers. Part 4. Failure-rate and failure-mode data

    International Nuclear Information System (INIS)

    Jaross, R.A.

    1983-09-01

    An assessment of the reliability of solid-state motor controllers for nuclear power plants is made. Available data on failure-rate and failure-mode data for solid-state motor controllers based on industrial operating experience is meager; the data are augmented by data on other solid-state power electronic devices that are shown to have components similar to those found in solid-state motor controllers. In addition to large nonnuclear solid-state adjustable-speed motor drives, the reliability of nuclear plant inverter systems and high-voltage solid-state dc transmission-line converters is assessed. Licensee Event Report analyses from several sources, the open literature, and personal communications are used to determine the realiability of solid-state devices typical of those expected to be used in nuclear power plants in terms of failures per hour

  14. New Methodology for Optimal Flight Control using Differential Evolution Algorithms applied on the Cessna Citation X Business Aircraft – Part 2. Validation on Aircraft Research Flight Level D Simulator

    Directory of Open Access Journals (Sweden)

    Yamina BOUGHARI

    2017-06-01

    Full Text Available In this paper the Cessna Citation X clearance criteria were evaluated for a new Flight Controller. The Flight Control Law were optimized and designed for the Cessna Citation X flight envelope by combining the Deferential Evolution algorithm, the Linear Quadratic Regulator method, and the Proportional Integral controller during a previous research presented in part 1. The optimal controllers were used to reach satisfactory aircraft’s dynamic and safe flight operations with respect to the augmentation systems’ handling qualities, and design requirements. Furthermore the number of controllers used to control the aircraft in its flight envelope was optimized using the Linear Fractional Representations features. To validate the controller over the whole aircraft flight envelope, the linear stability, eigenvalue, and handling qualities criteria in addition of the nonlinear analysis criteria were investigated during this research to assess the business aircraft for flight control clearance and certification. The optimized gains provide a very good stability margins as the eigenvalue analysis shows that the aircraft has a high stability, and a very good flying qualities of the linear aircraft models are ensured in its entire flight envelope, its robustness is demonstrated with respect to uncertainties due to its mass and center of gravity variations.

  15. Territorial Service as part of the social and territorial control of the Salvadoran State during the armed conflict (1972-1992

    Directory of Open Access Journals (Sweden)

    Herard Von Santos

    2016-06-01

    Full Text Available Historiography study done with a narrative approach, based on documentary research and consulting oral sources. A historical review of the social and territorial control developed by the Salvadoran State during the internal armed conflict (1972-1992 is made. This is an academic effort to bring relevant elements that could be useful for contemporary contexts, especially in stages where irregular armed groups have a presence in the territory and exercise powers. The Territorial Service was a strategy to recover the State’s presence in the territory and exercise social control over vulnerable populations.

  16. Absolute absorbed dose measurements with an array of ionization chambers as part of a routine procedure of quality control for the VMAT technique

    International Nuclear Information System (INIS)

    Clemente Gutierrez, F.; Cabello Murillo, E.; Ramirez Ros, J. C.; Casa de Julian, M. A. de la

    2011-01-01

    Arcotheraphy techniques volumetric modulated (VMAT) treatments involve continuous variation of the gantry rotation speed, positions of the sheets and dose rate. Since all treatments are administered by continuous arcs, these techniques require quality control procedures to ensure quick and easy constancy of the calibration factor (total absorbed dose) for any gantry angle. We report here a simple method of quality control for the measurement of the calibration factor using an array of ionization chambers. The measurements were performed on a unit of 6 MV Elekta Synergy with VMAT, belonging to the Radiation Oncology service of the Defense Central Hospital Gomez Ulla.

  17. Control of the working environment dosimetry and technical radiation protection at the RA reactor, Part I; Deo I: Kontrola radne sredine - poslovi dozimetrije i tehnicke zastite od zracenja kod reaktora RA

    Energy Technology Data Exchange (ETDEWEB)

    Ninkovic, N; Bjelanovic, J; Minicic, Z; Komatina, R; Raicevic, J [Institute of Nuclear Sciences Boris Kidric, Vinca, Beograd (Yugoslavia)

    1984-12-15

    This report contains data and analysis of the of measured sample results collected during radiation protection control in the working environment of the RA reactor. First part contains basic exposure values and statistical review of the the total number of radiation measurements. It includes contents of radioactive gasses and effluents in the air, as well as the level of surface contamination of clothes and uncovered parts of the personnel bodies. Second part deals with the analysis of personnel doses. It was found that the maximum individual dose from external irradiation amounted to 16.9 mSV during past 10 months. Individual exposures for 9/10 of the personnel were less than 1/10 of the permissible annual exposure. Data are compared to radiation doses for last year and previous five years. Third part of this annex contains basic data about the quantity of collected radioactive waste, total quantity of contaminated and decontaminated surfaces. The last part analyzes accidents occurred at the reactor during 1984. It was found that there have been no accidents that could cause significant contamination of working surfaces and components nor radiation exposure of the personnel.

  18. Subjects and methods of a population-based case-control study on life-style factors and cancer of the pancreas and the biliary system. Part 1

    NARCIS (Netherlands)

    Bueno de Mesquita HB; Heisterkamp SH; Moerman CJ; Runia S

    1989-01-01

    Gedurende de jaren 1984-1988 werd in Nederland een patient-controle onderzoek uitgevoerd in de algemene bevolking naar de relatie tussen levensstijl factoren met inbegrip van de voeding en het ontstaan van kanker van de alvleesklier en het galweg systeem. Het onderzoek maakte deel uit van het

  19. An exact solution procedure for multi-item two-echelon spare parts inventory control problem with batch ordering in the central warehouse

    NARCIS (Netherlands)

    Topan, E.; Bayindir, Z.P.; Tan, T.

    2009-01-01

    We consider a multi-item two-echelon inventory system in which the central warehouse operates under a (Q; R) policy, and the local warehouses implement basestock policy. An exact solution procedure is proposed to find the inventory control policy parameters that minimize the system-wide inventory

  20. Virtual sensors for active noise control in acoustic-structural coupled enclosures using structural sensing: part II--Optimization of structural sensor placement.

    Science.gov (United States)

    Halim, Dunant; Cheng, Li; Su, Zhongqing

    2011-04-01

    The work proposed an optimization approach for structural sensor placement to improve the performance of vibro-acoustic virtual sensor for active noise control applications. The vibro-acoustic virtual sensor was designed to estimate the interior sound pressure of an acoustic-structural coupled enclosure using structural sensors. A spectral-spatial performance metric was proposed, which was used to quantify the averaged structural sensor output energy of a vibro-acoustic system excited by a spatially varying point source. It was shown that (i) the overall virtual sensing error energy was contributed additively by the modal virtual sensing error and the measurement noise energy; (ii) each of the modal virtual sensing error system was contributed by both the modal observability levels for the structural sensing and the target acoustic virtual sensing; and further (iii) the strength of each modal observability level was influenced by the modal coupling and resonance frequencies of the associated uncoupled structural/cavity modes. An optimal design of structural sensor placement was proposed to achieve sufficiently high modal observability levels for certain important panel- and cavity-controlled modes. Numerical analysis on a panel-cavity system demonstrated the importance of structural sensor placement on virtual sensing and active noise control performance, particularly for cavity-controlled modes.

  1. Multivariate approaches for stability control of the olive oil reference materials for sensory analysis - part I: framework and fundamentals.

    Science.gov (United States)

    Valverde-Som, Lucia; Ruiz-Samblás, Cristina; Rodríguez-García, Francisco P; Cuadros-Rodríguez, Luis

    2018-02-09

    Virgin olive oil is the only food product for which sensory analysis is regulated to classify it in different quality categories. To harmonize the results of the sensorial method, the use of standards or reference materials is crucial. The stability of sensory reference materials is required to enable their suitable control, aiming to confirm that their specific target values are maintained on an ongoing basis. Currently, such stability is monitored by means of sensory analysis and the sensory panels are in the paradoxical situation of controlling the standards that are devoted to controlling the panels. In the present study, several approaches based on similarity analysis are exploited. For each approach, the specific methodology to build a proper multivariate control chart to monitor the stability of the sensory properties is explained and discussed. The normalized Euclidean and Mahalanobis distances, the so-called nearness and hardiness indices respectively, have been defined as new similarity indices to range the values from 0 to 1. Also, the squared mean from Hotelling's T 2 -statistic and Q 2 -statistic has been proposed as another similarity index. © 2018 Society of Chemical Industry. © 2018 Society of Chemical Industry.

  2. ["Me? I'm just here, part of the world". A field experience on endemic disease control in Cansanção, Minas Gerais, Brazil].

    Science.gov (United States)

    Dias, R B

    1998-01-01

    This free-style article reports an experience with Chagas' disease control involving community participation in the Jequitinhonha Valley (Minas Gerais, Brazil) implemented during the 1980s and recently reevaluated. As an action-based participant research project, it was supported by the Socioeconomic TDR Committee (WHO/WB/UNDP) in the area of Popular Education. The main objective was to investigate the meaning of Chagas' disease from the community's perspective, seeking alternative control measures with their participation. Despite the extremely high prevalence of the disease, it was no perceived as a priority by the population, who were living in destitution and simply fighting for their very survival. Given this situation, Chagas' disease control was performed in an integrated manner, taking other community needs into account. The article suggests some forms of participation in the control of endemic diseases, taking into account the people's knowledge, focused on the "here and now" in an integrated vision of both their problems and their ability to mobilize behind concrete interests. Changes are also needed in the relationship between outside agents and the community, reciprocity in the involvement with community, a permanent attitude of listening and solidarity, a "self-diagnosis", and organization of population.

  3. Sensory and cognitive neurophysiology in rats, Part 1: Controlled tactile stimulation and micro-ECoG recordings in freely moving animals

    NARCIS (Netherlands)

    Dimitriadis, G.; Fransen, A.M.M.; Maris, E.G.G.

    2014-01-01

    Background: We have developed a setup for rats that allows for controlled sensory input to an animal engaged in a task while recording both electrophysiological signals and behavioral output. New method: We record electrophysiological signals using a novel high-density micro-electrocorticography

  4. Pacific Northwest Laboratory annual report for 1980 to the DOE Assistant Secretary for Environment. Part 5. Environmental assessment, control, health and safety

    International Nuclear Information System (INIS)

    Baalman, R.W.; Hays, I.D.

    1981-02-01

    Pacific Northwest Laboratory's (PNL) 1980 annual report to the DOE Assistant Secretary for Environment describes research in environment, health, and safety conducted during fiscal year 1980. Part 5 includes technology assessments for natural gas, enhanced oil recovery, oil shale, uranium mining, magnetic fusion energy, solar energy, uranium enrichment and industrial energy utilization; regional analysis studies of environmental transport and community impacts; environmental and safety engineering for LNG, oil spills, LPG, shale oil waste waters, geothermal liquid waste disposal, compressed air energy storage, and nuclear/fusion fuel cycles; operational and environmental safety studies of decommissioning, environmental monitoring, personnel dosimetry, and analysis of criticality safety; health physics studies; and epidemiological studies. Also included are an author index, organization of PNL charts and distribution lists of the annual report, along with lists of presentations and publications

  5. Pacific Northwest Laboratory annual report for 1980 to the DOE Assistant Secretary for Environment. Part 5. Environmental assessment, control, health and safety

    Energy Technology Data Exchange (ETDEWEB)

    Baalman, R.W.; Hays, I.D. (eds.)

    1981-02-01

    Pacific Northwest Laboratory's (PNL) 1980 annual report to the DOE Assistant Secretary for Environment describes research in environment, health, and safety conducted during fiscal year 1980. Part 5 includes technology assessments for natural gas, enhanced oil recovery, oil shale, uranium mining, magnetic fusion energy, solar energy, uranium enrichment and industrial energy utilization; regional analysis studies of environmental transport and community impacts; environmental and safety engineering for LNG, oil spills, LPG, shale oil waste waters, geothermal liquid waste disposal, compressed air energy storage, and nuclear/fusion fuel cycles; operational and environmental safety studies of decommissioning, environmental monitoring, personnel dosimetry, and analysis of criticality safety; health physics studies; and epidemiological studies. Also included are an author index, organization of PNL charts and distribution lists of the annual report, along with lists of presentations and publications. (DLS)

  6. A Wims E analysis of the zero energy experiments of Dragon prior to charge IV - Part 3: Prelmininary investigations into the control rod representation and related problems

    Energy Technology Data Exchange (ETDEWEB)

    Dubofsky, W; Woloch, F

    1973-09-28

    In the collaboration between UKAEA and Dragon for Zero Energy Experiment Evaluation, Dragon is to undertake all investigations needed for the representation of specific features of the Dragon Reactor experiment which are not necessarily characteristic of the large HTR system. One quite obvious uniqueness of Dragon is the location of the control rods situated in the radial reflector, only a few thermal mean free paths away from the core reflector boundary. In the first onslaught it is our intention to use the already available WIMS modules as much as possible and to identify difficulties in doing so. Finally it will be profitable to consider if the control rod representation found as a result of the whole exercise lends itself for the routine calculations of Dragon. In this paper Section 2 describes the geometrical difficulties to be overcome. Section 3 presents the results of calculations so far available. Section 4 gives the layout of further calculations planned and Section 5 presents the conclusions.

  7. Controlled Release Strategies for Bone, Cartilage, and Osteochondral Engineering—Part I: Recapitulation of Native Tissue Healing and Variables for the Design of Delivery Systems

    Science.gov (United States)

    Santo, Vítor E.; Mano, João F.; Reis, Rui L.

    2013-01-01

    The potential of growth factors to stimulate tissue healing through the enhancement of cell proliferation, migration, and differentiation is undeniable. However, critical parameters on the design of adequate carriers, such as uncontrolled spatiotemporal presence of bioactive factors, inadequate release profiles, and supraphysiological dosages of growth factors, have impaired the translation of these systems onto clinical practice. This review describes the healing cascades for bone, cartilage, and osteochondral interface, highlighting the role of specific growth factors for triggering the reactions leading to tissue regeneration. Critical criteria on the design of carriers for controlled release of bioactive factors are also reported, focusing on the need to provide a spatiotemporal control over the delivery and presentation of these molecules. PMID:23268651

  8. Modeling simulation and control of the wood drying process. Part 1: A set of PDE`s as an internal model

    Energy Technology Data Exchange (ETDEWEB)

    Tarasiewicz, S. [Laval Univ., Sainte-Foy, Quebec (Canada). Dept. of Mechanical Engineering; Leger, F. [Forintek Canada Corp. East Div., Sainte-Foy, Quebec (Canada)

    1998-07-01

    The internal model proposed is a nonlinear system of a few partial differential equations. The boundary conditions for the differential equations are specified at the lumber board entrance and between the wood and air. The initial conditions are calibrated by solving the static model and by the technical experiment. In conclusion, it can be said that the consistency of the model with experimental results seems to be reasonably good and can be used for process simulation and control.

  9. Material control in nuclear fuel fabrication facilities. Part II. Accountability, instrumntation, and measurement techniques in fuel fabrication facilities, P.O.1236909. Final report

    International Nuclear Information System (INIS)

    Borgonovi, G.M.; McCartin, T.J.; McDaniel, T.; Miller, C.L.; Nguyen, T.

    1978-12-01

    This report describes the measurement techniques, the instrumentation, and the procedures used in accountability and control of nuclear materials, as they apply to fuel fabrication facilities. Some of the material included has appeared elswhere and it has been summarized. An extensive bibliography is included. A spcific example of application of the accountability methods to a model fuel fabrication facility which is based on the Westinghouse Anderson design

  10. Material control in nuclear fuel fabrication facilities. Part II. Accountability, instrumntation, and measurement techniques in fuel fabrication facilities, P. O. 1236909. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Borgonovi, G.M.; McCartin, T.J.; McDaniel, T.; Miller, C.L.; Nguyen, T.

    1978-12-01

    This report describes the measurement techniques, the instrumentation, and the procedures used in accountability and control of nuclear materials, as they apply to fuel fabrication facilities. Some of the material included has appeared elswhere and it has been summarized. An extensive bibliography is included. A spcific example of application of the accountability methods to a model fuel fabrication facility which is based on the Westinghouse Anderson design.

  11. Modular version of SIMCON, FPGA based, DSP integrated, LLRF control system for TESLA FEL part II: measurement of SIMCON 3.0 DSP daughterboard

    Science.gov (United States)

    Giergusiewicz, Wojciech; Koprek, Waldemar; Jalmuzna, Wojciech; Pozniak, Krzysztof T.; Romaniuk, Ryszard S.

    2006-02-01

    The paper describes design, construction and initial measurements of an eight channel electronic LLRF device predicted for building of the control system for the W-FEL accelerator at DESY (Hamburg). The device, referred in the paper to as the SIMCON 3.0 (from the SC cavity simulator and controller) consists of a 16 layer, VME size, PCB, a large FPGA chip (VirtexII-4000 by Xilinx), eight fast ADCs and four DACs (by Analog Devices). To our knowledge, the proposed device is the first of this kind for the accelerator technology in which there was achieved (the FPGA based) DSP latency below 200 ns. With the optimized data transmission system, the overall LLRF system latency can be as low as 500 ns. The SIMCON 3.0 sub-system was applied for initial tests with the ACCl module of the VUV FEL accelerator (eight channels) and with the CHECHIA test stand (single channel), both at the DESY. The promising results with the SIMCON 3.0. encouraged us to enter the design of SIMCON 3.1. possessing 10 measurement and control channels and some additional features to be reported in the next technical note. SIMCON 3.0. is a modular solution, while SIMCON 3.1. will be an integrated board of the all-in-one type. Two design approaches - modular and all-in-one - after branching off in this version of the Simcon, will be continued.

  12. Aquacel(®) Ag dressing versus Acticoat™ dressing in partial thickness burns: a prospective, randomized, controlled study in 100 patients. Part 1: burn wound healing.

    Science.gov (United States)

    Verbelen, Jozef; Hoeksema, Henk; Heyneman, Alexander; Pirayesh, Ali; Monstrey, Stan

    2014-05-01

    Studies comparing contemporary silver dressings in burns are scarce. In a prospective, randomized, controlled study, counting 50 patients/research group, we compared two frequently used silver dressings, Acticoat™ and Aquacel(®) Ag, in the management of partial thickness burns with a predicted healing time between 7 and 21 days as assessed by laser Doppler imaging between 48 and 72h after burn. Variables investigated were related to baseline research group characteristics, wound healing, bacteriology, economics, nurse, and patient experience. Both research groups were comparably composed taking into account gender, age and burn characteristics. Similar results were obtained as to healing time and bacterial control with both silver dressings. A statistically significant difference in favor of the Aquacel(®) Ag dressing was found for average ease of use (p<0.001), average ease of application (p=0.001), patient pain (p<0.001), patient comfort with the dressing (p=0.017), silver staining (p<0.001), and cost effectiveness (p<0.001). Both silver dressings resulted in comparable healing times and bacterial control but the Aquacel(®) Ag dressing significantly increased comfort for patients as well as nurses and was significantly more cost-effective than the Acticoat™ dressing for the given indication. Copyright © 2013 Elsevier Ltd and ISBI. All rights reserved.

  13. Area-wide management of Aedes albopictus. Part 2: gauging the efficacy of traditional integrated pest control measures against urban container mosquitoes.

    Science.gov (United States)

    Fonseca, Dina M; Unlu, Isik; Crepeau, Taryn; Farajollahi, Ary; Healy, Sean P; Bartlett-Healy, Kristen; Strickman, Daniel; Gaugler, Randy; Hamilton, George; Kline, Daniel; Clark, Gary G

    2013-12-01

    Aedes (Stegomyia) albopictus (Skuse) is an important disease vector and biting nuisance. During the 2009 active season, six ∼1000-parcel sites were studied, three in urban and three in suburban areas of New Jersey, United States, to examine the efficacy of standard integrated urban mosquito control strategies applied area wide. Active source reduction, larviciding, adulticiding and public education (source reduction through education) were implemented in one site in each county, an education-only approach was developed in a second site and a third site was used as an untreated experimental control. Populations were surveyed weekly with BG-Sentinel traps and ovitraps. A substantial reduction in Ae. albopictus populations was achieved in urban sites, but only modest reductions in suburban sites. Education alone achieved significant reductions in urban adult Ae. albopictus. Egg catches echoed adult catches only in suburban sites. There are significant socioeconomic and climatic differences between urban and suburban sites that impact upon Ae. albopictus populations and the efficacy of the control methods tested. An integrated pest management approach can affect abundances, but labor-intensive, costly source reduction was not enough to maintain Ae. albopictus counts below a nuisance threshold. Nighttime adult population suppression using truck-mounted adulticides can be effective. Area-wide cost-effective strategies are necessary. Published 2013. This article is a U.S. Government work and is in the public domain in the USA.

  14. Front line of cement technolgy and control. Part 5. ; Baking process and chemical reactions. Cement saisentan sono gijutsu to kanri 5. ; Shosei katei to kagaku hanno

    Energy Technology Data Exchange (ETDEWEB)

    Hirai, M. (Ube Industries, Ltd., Yamaguchi (Japan))

    1990-06-01

    The baking process in cement production means the process that the raw materials which were mixed and pulverized in the raw material preparation process are charged into a reaction furnace which is called kiln, and clinders (intermediate product of cement) are generated. It is the process which affects quality as well as production cost of cement more significantly than anything else. In this article, an outline of the above baking facilities, how the raw materials change and clinkers are generated therein, and how they are controlled are introduced. Clinkers are composed of such products as alite, belite, aluminate and ferrite, etc. which were generated after decomposition reactions of such raw materials as lime stone, clay, silica rock and iron oxide in the above kiln. The essential ponts of the process control which makes the generation reactions of clinker compounds efficiently are such two points as well balanced raw materials to be charged into the baking facilities and stable operation of such facilities. The quality of cement which is required as finished goods is achieved by the quality control at each intermediate process and the quality tests of cement. 5 refs., 10 figs., 2 tabs.

  15. Definition, analysis and development of an optical data distribution network for integrated avionics and control systems. Part 2: Component development and system integration

    Science.gov (United States)

    Yen, H. W.; Morrison, R. J.

    1984-01-01

    Fiber optic transmission is emerging as an attractive concept in data distribution onboard civil aircraft. Development of an Optical Data Distribution Network for Integrated Avionics and Control Systems for commercial aircraft will provide a data distribution network that gives freedom from EMI-RFI and ground loop problems, eliminates crosstalk and short circuits, provides protection and immunity from lightning induced transients and give a large bandwidth data transmission capability. In addition there is a potential for significantly reducing the weight and increasing the reliability over conventional data distribution networks. Wavelength Division Multiplexing (WDM) is a candidate method for data communication between the various avionic subsystems. With WDM all systems could conceptually communicate with each other without time sharing and requiring complicated coding schemes for each computer and subsystem to recognize a message. However, the state of the art of optical technology limits the application of fiber optics in advanced integrated avionics and control systems. Therefore, it is necessary to address the architecture for a fiber optics data distribution system for integrated avionics and control systems as well as develop prototype components and systems.

  16. Effectiveness of educational poster on knowledge of emergency management of dental trauma--part 2: cluster randomised controlled trial for secondary school students.

    Science.gov (United States)

    Young, Cecilia; Wong, Kin Yau; Cheung, Lim K

    2014-01-01

    To investigate the effectiveness of educational poster on improving secondary school students' knowledge of emergency management of dental trauma. A cluster randomised controlled trial was conducted. 16 schools with total 671 secondary students who can read Chinese or English were randomised into intervention (poster, 8 schools, 364 students) and control groups (8 schools, 305 students) at the school level. Baseline knowledge of dental trauma was obtained by a questionnaire. Poster containing information of dental trauma management was displayed in a classroom for 2 weeks in each school in the intervention group whereas in the control group there was no display of such posters. Students of both groups completed the same questionnaire after 2 weeks. Two-week display of posters improved the knowledge score by 1.25 (p-value = 0.0407) on average. Educational poster on dental trauma management significantly improved the level of knowledge of secondary school students in Hong Kong. HKClinicalTrial.com HKCTR-1343 ClinicalTrials.gov NCT01809457.

  17. Programa de normalización de estudios previos y control de calidad en las intervenciones: propiedades hídricas 2ª parte

    OpenAIRE

    Villegas Sánchez, Rosario

    1998-01-01

    Este artículo es una continuación de otro publicado en PH 22 y tiene como objetivo presentar los resultados del Subprograma de Normalización de Estudios Previos y Control de Calidad en las Intervenciones, aplicado a bienes inmuebles, propulsado por el IAPH. En concreto, estos textos hacen referencia a la normalización de las técnicas y ensayos para la determinación de las propiedades hídricas y porometrías. Las autoras del artículo, describen pormenorizadamente en el texto, ayudadas de fórmul...

  18. El control numérico computarizado en el desarrollo industrial Parte 2: desarrollo y aplicaciones del C.N.C.

    OpenAIRE

    Ruiz, Lino

    2016-01-01

    En la edición anterior nuestro principal énfasis fue el de presentar el control numérico computarizado (C.N.C.) como una alternativa tecnológica que pueda potenciar nuestro desarrollo industrial, por lo que describimos sus características principales y su incidencia en el trabajador. En el presente articulo nos enfocaremos, más al manejo de la información en las máquinas CNC, las tendencias actuales del desarrollo de las MHCNC y las tendencias industriales de nuestra época.

  19. Factors Controlling Pre-Columbian and Early Historic Maize Productivity in the American Southwest, Part 1: The Southern Colorado Plateau and Rio Grande Regions

    Science.gov (United States)

    Benson, L.V.

    2011-01-01

    Maize is the New World's preeminent grain crop and it provided the economic basis for human culture in many regions within the Americas. To flourish, maize needs water, sunlight (heat), and nutrients (e. g., nitrogen). In this paper, climate and soil chemistry data are used to evaluate the potential for dryland (rainon-field) agriculture in the semiarid southeastern Colorado Plateau and Rio Grande regions. Processes that impact maize agriculture such as nitrogen mineralization, infiltration of precipitation, bare soil evaporation, and transpiration are discussed and evaluated. Most of the study area, excepting high-elevation regions, receives sufficient solar radiation to grow maize. The salinities of subsurface soils in the central San Juan Basin are very high and their nitrogen concentrations are very low. In addition, soils of the central San Juan Basin are characterized by pH values that exceed 8.0, which limit the availability of both nitrogen and phosphorous. In general, the San Juan Basin, including Chaco Canyon, is the least promising part of the study area in terms of dryland farming. Calculations of field life, using values of organic nitrogen for the upper 50 cm of soil in the study area, indicate that most of the study area could not support a 10-bushel/acre crop of maize. The concepts, methods, and calculations used to quantify maize productivity in this study are applicable to maize cultivation in other environmental settings across the Americas. ?? 2010 US Government.

  20. Metabolites from nematophagous fungi and nematicidal natural products from fungi as an alternative for biological control. Part I: metabolites from nematophagous ascomycetes.

    Science.gov (United States)

    Degenkolb, Thomas; Vilcinskas, Andreas

    2016-05-01

    Plant-parasitic nematodes are estimated to cause global annual losses of more than US$ 100 billion. The number of registered nematicides has declined substantially over the last 25 years due to concerns about their non-specific mechanisms of action and hence their potential toxicity and likelihood to cause environmental damage. Environmentally beneficial and inexpensive alternatives to chemicals, which do not affect vertebrates, crops, and other non-target organisms, are therefore urgently required. Nematophagous fungi are natural antagonists of nematode parasites, and these offer an ecophysiological source of novel biocontrol strategies. In this first section of a two-part review article, we discuss 83 nematicidal and non-nematicidal primary and secondary metabolites found in nematophagous ascomycetes. Some of these substances exhibit nematicidal activities, namely oligosporon, 4',5'-dihydrooligosporon, talathermophilins A and B, phomalactone, aurovertins D and F, paeciloxazine, a pyridine carboxylic acid derivative, and leucinostatins. Blumenol A acts as a nematode attractant. Other substances, such as arthrosporols and paganins, play a decisive role in the life cycle of the producers, regulating the formation of reproductive or trapping organs. We conclude by considering the potential applications of these beneficial organisms in plant protection strategies.

  1. Extending the Constant Power Speed Range of the Brushless DC Motor through Dual Mode Inverter Control - Part II: Laboratory Proof-of-Principle

    International Nuclear Information System (INIS)

    Lawler, J.S.

    2001-01-01

    Previous theoretical work has shown that when all loss mechanisms are neglected the constant power speed range (CPSR) of a brushless dc motor (BDCM) is infinite when the motor is driven by the dual-mode inverter control (DMIC)[1,2]. In a physical drive, losses, particularly speed-sensitive losses, will limit the CPSR to a finite value. In this paper we report the results of laboratory testing of a low-inductance, 7.5-hp BDCM driven by the DMIC. The speed rating of the test motor rotor limited the upper speed of the testing, and the results show that the CPSR of the test machine is greater than 6:1 when driven by the DMIC. Current wave shape, peak, and rms values remained controlled and within rating over the entire speed range. The laboratory measurements allowed the speed-sensitive losses to be quantified and incorporated into computer simulation models, which then accurately reproduce the results of lab testing. The simulator shows that the limiting CPSR of the test motor is 8:1. These results confirm that the DMIC is capable of driving low-inductance BDCMs over the wide CPSR that would be required in electric vehicle applications

  2. Assessing the risk to green sturgeon from application of imidacloprid to control burrowing shrimp in Willapa Bay, Washington-Part I: exposure characterization.

    Science.gov (United States)

    Frew, John A; Sadilek, Martin; Grue, Christian E

    2015-11-01

    Willapa Bay and Grays Harbor (WA, USA) comprise the largest region of commercial oyster cultivation on the Pacific Coast. The activities of 2 species of burrowing shrimp impair growth and survival of oysters reared on the intertidal mudflats. To maintain viable harvests, the oyster growers have proposed controlling the shrimp by applying the insecticide imidacloprid onto harvested beds. Green sturgeon (listed in the Endangered Species Act) forage on burrowing shrimp and could be exposed to imidacloprid in the sediment porewater and through consumed prey. Studies were conducted to evaluate the likelihood that green sturgeon would be exposed to imidacloprid and to characterize the subsequent environmental exposure. Comparisons between treated and untreated control beds following test application of the insecticide suggested that green sturgeon fed opportunistically on imidacloprid-impaired shrimp. The highest interpolated imidacloprid residue concentrations in field samples following chemical application were 27.8 µg kg(-1) and 31.4 µg kg(-1) in porewater and shrimp, respectively. Results from modeled branchial and dietary uptake, based on conservative assumptions, indicated that the porewater exposure route had the greatest contribution to systemic absorption of imidacloprid. The highest average daily uptake from porewater (177.9 µg kg(-1) body wt) was 9.5-fold greater than total dietary uptake (18.8 µg kg(-1) body wt). Concentrations and durations of exposure would be lower than the levels expected to elicit direct acute or chronic toxic effects. © 2015 SETAC.

  3. Experiences of persons with spinal cord injury undertaking a physical activity programme as part of the SCIPA 'Full-On' randomized controlled trial.

    Science.gov (United States)

    Calder, Allyson; Nunnerley, Jo; Mulligan, Hilda; Ahmad Ali, Nordawama; Kensington, Gemma; McVicar, Tim; van Schaik, Olivia

    2018-04-01

    For individuals with spinal cord injury the long term benefits of physical activity are well documented, however the majority of this population report inactivity secondary to participatory barriers. Research investigating physically intensive exercise programs for people with spinal cord injury is limited, with even less attention paid to the experience of the participants. To explore the experiences of persons with spinal cord injury of their participation in the New Zealand arm of the Spinal Cord Injury and Physical Activity (SCIPA) 'Full-On' randomized controlled trial. Eight participants recruited to SCIPA Full-On completed individual virtual video diary interviews three times across the duration of their twelve week Full-On trial. Expectations and highs and lows of the program were recorded via a webcam. The video diary data were transcribed verbatim and analyzed inductively for themes. Three independent themes were identified from the data: the participants' excitement of opportunity to participate in SCIPA Full-On' randomized controlled trial, personal rewards from participation and also the frustrations to participation they experienced. This study provides valuable information on factors that motivate participation in physical activity for individuals with spinal cord injury, within a research setting. The findings highlighted the importance of accessibility and a supportive network which may be a way to provide individuals with spinal cord injury the means to become self-efficacious to participate in community physical activity outside of the research environment. Copyright © 2017 Elsevier Inc. All rights reserved.

  4. Exact statistical analysis of nonlinear dynamic power reactor models by the Fokker--Planck method. Part II. Reactor with on-off control

    International Nuclear Information System (INIS)

    Debosscher, A.F.; Dutre, W.L.

    1979-01-01

    The paper deals with the exact stochastic analysis of the low-frequency neutron density fluctuations in an on-off controlled nuclear power reactor without delayed neutrons and perturbed by Gaussian white reactivity noise. The stochastic process, being Markovian, is completely characterized by its first-order probability density function (pdf) and the transition pdf. The first-order pdf is the normalized solution to the time-independent Fokker--Planck equation (FPE). Using this pdf, a general expression for the moments is obtained. The conditions for stochastic stability in probability, in the mean, and in the mean-square are derived. The time-dependent FPE is solved using the Laplace transform technique, which results in four distinct expressions for the transition pdf, according to the relative magnitude of initial and final reactor power with respect to the regulator level. After Laplace inversion, a physical interpretation of the controller's effect on the stochastic process becomes possible. Finally, making use of the obtained pdf's, the spectral density of the reactor power fluctuations is calculated

  5. Congruence between patient characteristics and interventions may partly explain medication adherence intervention effectiveness: an analysis of 190 randomized controlled trials from a Cochrane systematic review.

    Science.gov (United States)

    Allemann, Samuel S; Nieuwlaat, Robby; Navarro, Tamara; Haynes, Brian; Hersberger, Kurt E; Arnet, Isabelle

    2017-11-01

    Due to the negative outcomes of medication nonadherence, interventions to improve adherence have been the focus of countless studies. The congruence between adherence-related patient characteristics and interventions may partly explain the variability of effectiveness in medication adherence studies. In their latest update of a Cochrane review reporting inconsistent effects of adherence interventions, the authors offered access to their database for subanalysis. We aimed to use this database to assess congruence between adherence-related patient characteristics and interventions and its association with intervention effects. We developed a congruence score consisting of six features related to inclusion criteria, patient characteristics at baseline, and intervention design. Two independent raters extracted and scored items from the 190 studies available in the Cochrane database. We correlated overall congruence score and individual features with intervention effects regarding adherence and clinical outcomes using Kruskal-Wallis rank sum test and Fisher's exact test. Interrater reliability for newly extracted data was almost perfect with a Cohen's Kappa of 0.92 [95% confidence interval (CI) = 0.89-0.94; P congruence score nor any other individual feature (i.e., "determinants of nonadherence as inclusion criteria," "tailoring of interventions to the inclusion criteria," "reasons for nonadherence assessed at baseline," "adjustment of intervention to individual patient needs," and "theory-based interventions") was significantly associated with intervention effects. The presence of only six studies that included nonadherent patients and the interdependency of this feature with the remaining five might preclude a conclusive assessment of congruence between patient characteristics and adherence interventions. In order to obtain clinical benefits from effective adherence interventions, we encourage researchers to focus on the inclusion of nonadherent patients. Copyright

  6. Discriminating Between Tectonic and Climatic Controls on Early Hominin Paleoenvironments From the Koobi Fora Region, Northeastern Turkana Basin, Kenya: Part I

    Science.gov (United States)

    Lepre, C. J.; Quinn, R. L.

    2004-12-01

    Understanding controls on environmental records from Plio-Pleistocene Africa is critical for interpreting human origins. Recent geological studies from East Africa have focused on the relationship between Plio-Pleistocene patterns of hominin evolution, environmental change, and climate preserved in stratigraphic records of sedimentary basins (e.g. deMenocal, 2004; Wynn, 2004). Despite the fact that tectonics is a primary control on sedimentation in East African basins (e.g. Baker, 1986; Frostick, 1997), relatively few studies have either investigated its potential influence on early hominin evolution or attempted to discriminate between tectonic and climate controls on paleoenvironmental change. Presented is a study that explores these issues. Within the Koobi Fora Formation, between 4.0 and 2.5 Ma, environmental change is related to an overall trend of linear rates of tectonic subsidence. However, smaller-scale fluctuations in subsidence rates established lakes during times of increased subsidence followed by the transition to rivers during times of decreased subsidence and basin infilling (Feibel, 1994a, 2000). In contrast, environmental change during the period between 2.5 and 1.5 Ma was forced by changes in half-graben propagation, fault movement, and subsidence. This change is recorded within a stratigraphic sequence that is defined by major (erosional) boundary surface unconformities. The sequence is internally comprised of stable-lacustrine; stable-lacustrine, delta, and ephemeral-lacustrine; and fluvial environments of deposition. This environmental progression defines lowstand, transgressive, and highstand systems tracts respectively. Transition between systems tracts and depositional environments was controlled by rates of tectonic subsidence. The formation of stable-lacustrine environments of deposition during the lowstand systems tract was due to subsidence rates out-pacing sedimentation rates that was associated with a major tectonic event

  7. Terminal area automatic navigation, guidance, and control research using the Microwave Landing System (MLS). Part 2: RNAV/MLS transition problems for aircraft

    Science.gov (United States)

    Pines, S.

    1982-01-01

    The problems in navigation and guidance encountered by aircraft in the initial transition period in changing from distance measuring equipment, VORTAC, and barometric instruments to the more precise microwave landing system data type navaids in the terminal area are investigated. The effects of the resulting discontinuities on the estimates of position and velocity for both optimal (Kalman type navigation schemes) and fixed gain (complementary type) navigation filters, and the effects of the errors in cross track, track angle, and altitude on the guidance equation and control commands during the critical landing phase are discussed. A method is presented to remove the discontinuities from the navigation loop and to reconstruct an RNAV path designed to land the aircraft with minimal turns and altitude changes.

  8. Methods for the quality control of macroaggregates and colloids labelled with technetium-99m. Part of a coordinated programme on radiopharmaceuticals

    International Nuclear Information System (INIS)

    Cifka, J.

    1975-09-01

    Comprehensive studies of the antimony sulphide and sulphur colloids labelled with sup(99m)Tc was performed by the authors. Similar studies dealing with human serum albumin macroaggregates labelled with sup(99m)Tc were also initiated. The labelling processes were studied to determine the possible chemical forms of technetium-99m not bound to the colloidal particles. It was found that pertechnetate-99m is not the only possible impurity in the case of the colloids. Technetium-99m may be present as an soluble tartrate complex in the case of antimony sulphide colloid or as a soluble chlorocomplex in the case of the sulphur colloid. Techniques for the control of these colloids were developed. A method for the determination of particle size of the sulphur colloid is also described

  9. Standard format and content acceptance criteria for the material control and accounting (MC and A) reform amendment: 10 CFR Part 74, Subpart E

    International Nuclear Information System (INIS)

    1987-03-01

    Revisions have been made to the material control and accounting requirements for NRC licensees authorized to possess and use a formula quantity or more of strategic special nuclear material. The revisions require timely monitoring of in-process inventory and discrete items in order to detect anomalies potentially indicative of material losses. Timely detection and enhanced loss localization capabilities will be beneficial to alarm resolution and material recovery in the event of an actual loss. This document presents criteria that can be used by the license applicants and the license reviewers in the preparation and subsequent review of plans to be submitted in response to the the Reform Amendment. General performance objectives, system capabilities, process monitoring, item monitoring, alarm resolution, quality assurance, and accounting are addressed. 43 refs

  10. Concerning major items in government ordinance requiring modification of part of enforcement regulation for law relating to control of nuclear material, nuclear fuel and nuclear reactor

    International Nuclear Information System (INIS)

    1989-01-01

    The report describes major items planned to be incorporated into the enforcement regulations for laws relating to control of nuclear material, nuclear fuel and nuclear reactor. The modifications have become necessary for the nation to conclude a nuclear material protection treaty with other countries. The modification include the definitions of 'special nuclear fuel substances' and 'special nuclear fuel substances' and 'special nuclear fuel substances subject to protection'. The modifications require that protective measures be taken when handling and transporting special nuclear fuel substances subject to protection. Transport of special nuclear fuel substances requires approval from the Prime Minister or Transport Minister. Transport of special nuclear fuel substances subject to protection should be conducted after notifying the prefectural Public Safety Commission. Transport of special nuclear fuel substances subject to protection requires the conclusion of arrangements among responsible persons and approval of them from the Prime Minister. (N.K.)

  11. The Impact of Massage Therapy on Function in Pain Populations-A Systematic Review and Meta-Analysis of Randomized Controlled Trials: Part II, Cancer Pain Populations.

    Science.gov (United States)

    Boyd, Courtney; Crawford, Cindy; Paat, Charmagne F; Price, Ashley; Xenakis, Lea; Zhang, Weimin

    2016-08-01

    Pain is multi-dimensional and may be better addressed through a holistic, biopsychosocial approach. Massage therapy is commonly practiced among patients seeking pain management; however, its efficacy is unclear. This systematic review and meta-analysis is the first to rigorously assess the quality of massage therapy research and evidence for its efficacy in treating pain, function-related and health-related quality of life in cancer populations. Key databases were searched from inception through February 2014. Eligible randomized controlled trials were assessed for methodological quality using the SIGN 50 Checklist. Meta-analysis was applied at the outcome level. A diverse steering committee interpreted the results to develop recommendations. Twelve high quality and four low quality studies were subsequently included in the review. Results demonstrate massage therapy is effective for treating pain compared to no treatment [standardized mean difference (SMD)  = -.20] and active (SMD = -0.55) comparators. Compared to active comparators, massage therapy was also found to be beneficial for treating fatigue (SMD = -1.06) and anxiety (SMD = -1.24). Based on the evidence, weak recommendations are suggested for massage therapy, compared to an active comparator, for the treatment of pain, fatigue, and anxiety. No recommendations were suggested for massage therapy compared to no treatment or sham control based on the available literature to date. This review addresses massage therapy safety, research challenges, how to address identified research gaps, and necessary next steps for implementing massage therapy as a viable pain management option for cancer pain populations. © 2016 American Academy of Pain Medicine.

  12. The Impact of Massage Therapy on Function in Pain Populations—A Systematic Review and Meta-Analysis of Randomized Controlled Trials: Part II, Cancer Pain Populations

    Science.gov (United States)

    Boyd, Courtney; Crawford, Cindy; Paat, Charmagne F; Price, Ashley; Xenakis, Lea; Zhang, Weimin; Buckenmaier, Chester; Buckenmaier, Pamela; Cambron, Jerrilyn; Deery, Christopher; Schwartz, Jan; Werner, Ruth; Whitridge, Pete

    2016-01-01

    Abstract Purpose Pain is multi-dimensional and may be better addressed through a holistic, biopsychosocial approach. Massage therapy is commonly practiced among patients seeking pain management; however, its efficacy is unclear. This systematic review and meta-analysis is the first to rigorously assess the quality of massage therapy research and evidence for its efficacy in treating pain, function-related and health-related quality of life in cancer populations. Methods Key databases were searched from inception through February 2014. Eligible randomized controlled trials were assessed for methodological quality using the SIGN 50 Checklist. Meta-analysis was applied at the outcome level. A diverse steering committee interpreted the results to develop recommendations. Results Twelve high quality and four low quality studies were subsequently included in the review. Results demonstrate massage therapy is effective for treating pain compared to no treatment [standardized mean difference (SMD)  = −.20] and active (SMD = −0.55) comparators. Compared to active comparators, massage therapy was also found to be beneficial for treating fatigue (SMD = −1.06) and anxiety (SMD = −1.24). Conclusion Based on the evidence, weak recommendations are suggested for massage therapy, compared to an active comparator, for the treatment of pain, fatigue, and anxiety. No recommendations were suggested for massage therapy compared to no treatment or sham control based on the available literature to date. This review addresses massage therapy safety, research challenges, how to address identified research gaps, and necessary next steps for implementing massage therapy as a viable pain management option for cancer pain populations. PMID:27165967

  13. Significance of the tropical fire ant Solenopsis geminata (hymenoptera: formicidae) as part of the natural enemy complex responsible for successful biological control of many tropical irrigated rice pests.

    Science.gov (United States)

    Way, M J; Heong, K L

    2009-10-01

    The tropical fire ant Solenopsis geminata (Fabricius) often nests very abundantly in the earthen banks (bunds) around irrigated rice fields in the tropics. Where some farmers habitually drain fields to the mud for about 3-4 days, the ants can quickly spread up to about 20 m into the fields where they collect food, including pest prey such as the eggs and young of the apple snail Pomacea caniculata (Lamarck) and insects such as lepidopterous larvae and hoppers, notably Nilaparvata lugens (Stäl) the brown planthopper (Bph) and green leafhoppers Nephotettix spp. Even in drained fields, the activity of S. geminata is restricted by rainfall in the wet season. The relatively few ant workers that forage characteristically into drained fields and on to the transplanted clumps of rice plants (hills) kill the normally few immigrant Bph adults but are initially slower acting than other species of the natural enemy complex. However, larger populations of Bph are fiercely attacked and effectively controlled by rapidly recruited ant workers; whereas, in the absence of the ant, the other natural enemies are inadequate. In normal circumstances, there is no ant recruitment in response to initially small populations of immigrant Bph and no evidence of incompatibility between ant foragers and other natural enemies such as spiders. However, when many ants are quickly and aggressively recruited to attack large populations of Bph, they temporarily displace some spiders from infested hills. It is concluded that, in suitable weather conditions and even when insecticides kill natural enemies within the rice field, periodic drainage that enables S. geminata to join the predator complex is valuable for ant-based control of pests such as snails and Lepidoptera, and especially against relatively large populations of Bph. Drainage practices to benefit ants are fully compatible with recent research, which shows that periodic drainage combats problems of 'yield decline' in intensively irrigated

  14. Field trials for the control of the Mediterranean fruit-fly by radiation induced sterility. Part of a coordinated programme on fruit-fly eradication of control by the sterile-male technique

    International Nuclear Information System (INIS)

    Mellado, L.; Arroyo, M.; Jimenez, A.; Ros, P.; Caballero, F.; Vargas, C.

    1975-12-01

    More than 50 million insects were used in field trials in which the applicability of the sterile insects release method to the control of Ceratitis capitata in Spain was tested. The areas concerned were Santa Fe, Purchil and Armilla. Whereas the infestation of untreated areas (controls) was 92 %, chemically treated areas (using Lebaycid and other insecticides) ranged from 1.2 to 17 %, and areas over which sterile insects had been released showed less than 1.3 % infestation. The economic aspects and advantages of the sterile insect method compared with chemical control measures are pointed out

  15. Biogeochemical processes in a clay formation in situ experiment: Part E - Equilibrium controls on chemistry of pore water from the Opalinus Clay, Mont Terri Underground Research Laboratory, Switzerland

    Energy Technology Data Exchange (ETDEWEB)

    Pearson, F.J., E-mail: fjpearson@gmail.com [Ground-Water Geochemistry, 5108 Trent Woods Dr., New Bern, NC 28562 (United States); Tournassat, Christophe; Gaucher, Eric C. [BRGM, B.P. 36009, 45060 Orleans Cedex 2 (France)

    2011-06-15

    Highlights: > Equilibrium models of water-rock reactions in clay rocks are reviewed. > Analyses of pore waters of the Opalinus Clay from boreholes in the Mont Terri URL, Switzerland, are tabulated. > Results of modelling with various mineral controls are compared with the analyses. > Best agreement results with calcite, dolomite and siderite or daphnite saturation, Na-K-Ca-Mg exchange and/or kaolinite, illite, quartz and celestite saturation. > This approach allows calculation of the chemistry of pore water in clays too impermeable to yield water samples. - Abstract: The chemistry of pore water (particularly pH and ionic strength) is an important property of clay rocks being considered as host rocks for long-term storage of radioactive waste. Pore waters in clay-rich rocks generally cannot be sampled directly. Instead, their chemistry must be found using laboratory-measured properties of core samples and geochemical modelling. Many such measurements have been made on samples from the Opalinus Clay from the Mont Terri Underground Research Laboratory (URL). Several boreholes in that URL yielded water samples against which pore water models have been calibrated. Following a first synthesis report published in 2003, this paper presents the evolution of the modelling approaches developed within Mont Terri URL scientific programs through the last decade (1997-2009). Models are compared to the composition of waters sampled during dedicated borehole experiments. Reanalysis of the models, parameters and database enabled the principal shortcomings of the previous modelling efforts to be overcome. The inability to model the K concentrations correctly with the measured cation exchange properties was found to be due to the use of an inappropriate selectivity coefficient for Na-K exchange; the inability to reproduce the measured carbonate chemistry and pH of the pore waters using mineral-water reactions alone was corrected by considering clay mineral equilibria. Re

  16. Mobile Breast Cancer e-Support Program for Chinese Women With Breast Cancer Undergoing Chemotherapy (Part 2): Multicenter Randomized Controlled Trial.

    Science.gov (United States)

    Zhu, Jiemin; Ebert, Lyn; Liu, Xiangyu; Wei, Di; Chan, Sally Wai-Chi

    2018-04-30

    Women undergoing chemotherapy for the treatment of breast cancer have frequently reported unmet supportive care needs. Moreover, easily accessible and innovative support is lacking. The purpose of this trial was to determine the effectiveness of an app-based breast cancer e-support program to address women's self-efficacy (primary outcome), social support, symptom distress, quality of life, anxiety, and depression. Secondary objectives included exploring the association between women's health outcomes and the breast cancer e-support usage data. A multicenter, single-blinded, randomized controlled trial was conducted. A total of 114 women with breast cancer, who were commencing chemotherapy and were able to access internet through a mobile phone, were recruited in the clinics from 2 university-affiliated hospitals in China. Women were randomized either to the intervention group (n=57) receiving breast cancer e-support plus care as usual or the control group (n=57) receiving care as usual alone. The health care team and research assistants collecting data were blinded to the women's group allocation. Bandura's self-efficacy theory and the social exchange theory guided the development of the breast cancer e-support program, which has 4 components: (1) a Learning forum, (2) a Discussion forum, (3) an Ask-the-Expert forum, and (4) a Personal Stories forum. Moderated by an experienced health care professional, the breast cancer e-support program supported women for 12 weeks covering 4 cycles of chemotherapy. Health outcomes were self-assessed through paper questionnaires in clinics at baseline before randomization (T0), after 3 (T1), and 6 months (T2) of follow-ups. Fifty-five participants in the intervention group and 49 in the control group completed the follow-up assessments (response rate: 91.2%). During the 12-week intervention, the log-in frequency ranged from 0 to 774 times (mean 54.7; SD 131.4; median 11; interquartile range, IQR 5-27), and the total usage

  17. Zeolite scaffolds for cultures of human breast cancer cells. Part II: Effect of pure and hybrid zeolite membranes on neoplastic and metastatic activity control.

    Science.gov (United States)

    Tavolaro, Palmira; Martino, Guglielmo; Andò, Sebastiano; Tavolaro, Adalgisa

    2016-11-01

    This work is focused on the response of two invasive phenotypes of human breast cancer cells, MCF-7 and MDA-MB-231, grown on synthesized zeolite scaffolds in order to study the influence of those biomaterials in controlled conditions with and without anti-tumoral drug treatments. Our research was directed to the use of doxorubicin (DOX) and bergapten (5-MOP). The former is broadly considered the most active single agent available for the treatment of breast cancer, the second is a natural psoralen with an apoptotic effect. The results indicate that both drugs inhibit the cell viability of all cell lines grown on all zeolite scaffolds and that all Pure Zeolite Membranes are more responsive with respect to all Mixed Matrix Membranes. Moreover, the results after treatment with DOX at a concentration of 7.4μM for 24h, show that the expression of the matrix metalloproteinases (MMP-2 and MMP-9) is greatly reduced in both cell lines, especially in those adherent on Pure Zeolite Scaffolds. Copyright © 2016 Elsevier B.V. All rights reserved.

  18. Control of Porosity and Spatter in Laser Welding of Thick AlMg5 Parts Using High-Speed Imaging and Optical Microscopy

    Directory of Open Access Journals (Sweden)

    Andrei C. Popescu

    2017-10-01

    Full Text Available We report on a feedback mechanism for rapid identification of optimal laser parameters during welding of AlMg5 coupons using real-time monitoring by high-speed imaging. The purpose was to constrain the liquid movement in the groove in order to obtain pore-free welds in this otherwise difficult-to-weld alloy. High-speed imaging of the welding process via an optical microscope allowed for recording at millimeter level, providing new information on liquid-metal dynamics during laser irradiation as well as plausible explanations for spatter occurrence and pores formation. The pore formation and especially the position of these pores had to be controlled in order to weld 3 mm thick samples. By tuning both laser power and pulse duration, pores were aligned on a single line, at the bottom of the weld. A laser pass of reduced power on that side was then sufficient for removing all pores and providing a suitable weld.

  19. Human Lung Cancer Risks from Radon – Part III - Evidence of Influence of Combined Bystander and Adaptive Response Effects on Radon Case-Control Studies - A Microdose Analysis

    Science.gov (United States)

    Leonard, Bobby E.; Thompson, Richard E.; Beecher, Georgia C.

    2012-01-01

    Since the publication of the BEIR VI (1999) report on health risks from radon, a significant amount of new data has been published showing various mechanisms that may affect the ultimate assessment of radon as a carcinogen, in particular the potentially deleterious Bystander Effect (BE) and the potentially beneficial Adaptive Response radio-protection (AR). The case-control radon lung cancer risk data of the pooled 13 European countries radon study (Darby et al 2005, 2006) and the 8 North American pooled study (Krewski et al 2005, 2006) have been evaluated. The large variation in the odds ratios of lung cancer from radon risk is reconciled, based on the large variation in geological and ecological conditions and variation in the degree of adaptive response radio-protection against the bystander effect induced lung damage. The analysis clearly shows Bystander Effect radon lung cancer induction and Adaptive Response reduction in lung cancer in some geographical regions. It is estimated that for radon levels up to about 400 Bq m−3 there is about a 30% probability that no human lung cancer risk from radon will be experienced and a 20% probability that the risk is below the zero-radon, endogenic spontaneous or perhaps even genetically inheritable lung cancer risk rate. The BEIR VI (1999) and EPA (2003) estimates of human lung cancer deaths from radon are most likely significantly excessive. The assumption of linearity of risk, by the Linear No-Threshold Model, with increasing radon exposure is invalid. PMID:22942874

  20. Resistance test of high-speed ship by means of attitude control method. Part 2; Shisei seigyo hoshiki ni yoru kosokutei no teiko shiken. 2

    Energy Technology Data Exchange (ETDEWEB)

    Hayashida, S [Nagasaki Institute of Applied Science, Nagasaki (Japan)

    1996-04-10

    The previous paper has proposed a resistance test method by controlling the attitude of a high-speed model ship using a personal computer without making a data base. For this method, the fluid force acting on the hull of model ship is measured, to change its attitude based on the measurement, and then, the fluid force is measured again, to change the attitude again. The traveling attitude is created by repeating this, to measure the force acting on the hull. Since the attitude is changed by calculating using the fluid force measured, various factors can be considered in the calculation process. For example, a test with an arbitrary displacement in an arbitrary position of center of gravity can be conducted in spite of actual displacement and position of center of gravity of the model ship. A test for a high-speed ship was conducted through this method, to obtain nearly satisfactory results compared with a usual resistance test. Occasionally, a lot of repetitions were required to satisfy the balancing condition of the force. In this study, the improvement of testing efficiency has been planned by modifying the analyzing program. 5 refs., 7 figs., 1 tab.

  1. Development of the microbiological control aspects of radiation sterilization of medical supplies. Part of a coordinated programme on radiation sterilization of medical and biological products

    International Nuclear Information System (INIS)

    Horakova, V.

    1978-06-01

    The variability and extent of microbial contamination of such medical supplies as hydrophilic gauze swabs and dermo-epidermal grafts were investigated. Gross bacterial contamination was observed in the swabs, with a relative absence of water. It was concluded that medical disposable products under dried aerobic conditions can be sterilized by a minimum dose of 25 kJ/kg/2.5 Mrad if the mean value of pre-sterilization bacterial counts does not exceed 100. Products contaminated by 10,000 or more bacteria prior to sterilization must be considered ''decontaminated'' after irradiation but as rather than ''sterile'', as accepted pharmaceutically. The author recommends that the efficacy of the sterilization dose used be evaluated, assuming the decrease in contaminated items to follow the exponential law, with constants estimated as n=1.98 and k=0.44, and that the sterilization process to be controlled dosimetrically. In general, sub-process doses should be used before actual sterilization by ionizing radiation, in order to estimate the constants characterizing the decrease in contamination under given conditions. In skin grafts a dose of 25 kJ/kg was found to give a high guarantee of sterility. A minimum sterilizing dose of 20 kJ/kg was recommended, provided the mean value of microorganisms on 1 cm 2 of the disinfected and freeze-dried skin grafts from human cadavres was 100, without exceeding an upper limit of 130

  2. The Impact of Massage Therapy on Function in Pain Populations—A Systematic Review and Meta-Analysis of Randomized Controlled Trials: Part III, Surgical Pain Populations

    Science.gov (United States)

    Boyd, Courtney; Crawford, Cindy; Paat, Charmagne F; Price, Ashley; Xenakis, Lea; Zhang, Weimin; Buckenmaier, Chester; Buckenmaier, Pamela; Cambron, Jerrilyn; Deery, Christopher; Schwartz, Jan; Werner, Ruth; Whitridge, Pete

    2016-01-01

    Abstract Objective Pain is multi-dimensional and may be better addressed through a holistic, biopsychosocial approach. Massage therapy is commonly practiced among patients seeking pain management; however, its efficacy is unclear. This systematic review and meta-analysis is the first to rigorously assess the quality of the evidence for massage therapy’s efficacy in treating pain, function-related, and health-related quality of life outcomes in surgical pain populations. Methods Key databases were searched from inception through February 2014. Eligible randomized controlled trials were assessed for methodological quality using SIGN 50 Checklist. Meta-analysis was applied at the outcome level. A professionally diverse steering committee interpreted the results to develop recommendations. Results Twelve high quality and four low quality studies were included in the review. Results indicate massage therapy is effective for treating pain [standardized mean difference (SMD) = −0.79] and anxiety (SMD = −0.57) compared to active comparators. Conclusion Based on the available evidence, weak recommendations are suggested for massage therapy, compared to active comparators for reducing pain intensity/severity and anxiety in patients undergoing surgical procedures. This review also discusses massage therapy safety, challenges within this research field, how to address identified research gaps, and next steps for future research. PMID:27165970

  3. The Impact of Massage Therapy on Function in Pain Populations-A Systematic Review and Meta-Analysis of Randomized Controlled Trials: Part III, Surgical Pain Populations.

    Science.gov (United States)

    Boyd, Courtney; Crawford, Cindy; Paat, Charmagne F; Price, Ashley; Xenakis, Lea; Zhang, Weimin

    2016-09-01

    Pain is multi-dimensional and may be better addressed through a holistic, biopsychosocial approach. Massage therapy is commonly practiced among patients seeking pain management; however, its efficacy is unclear. This systematic review and meta-analysis is the first to rigorously assess the quality of the evidence for massage therapy's efficacy in treating pain, function-related, and health-related quality of life outcomes in surgical pain populations. Key databases were searched from inception through February 2014. Eligible randomized controlled trials were assessed for methodological quality using SIGN 50 Checklist. Meta-analysis was applied at the outcome level. A professionally diverse steering committee interpreted the results to develop recommendations. Twelve high quality and four low quality studies were included in the review. Results indicate massage therapy is effective for treating pain [standardized mean difference (SMD) = -0.79] and anxiety (SMD = -0.57) compared to active comparators. Based on the available evidence, weak recommendations are suggested for massage therapy, compared to active comparators for reducing pain intensity/severity and anxiety in patients undergoing surgical procedures. This review also discusses massage therapy safety, challenges within this research field, how to address identified research gaps, and next steps for future research. © 2016 American Academy of Pain Medicine.

  4. Contamination control in HVAC systems for aseptic processing area. Part I: Case study of the airflow velocity in a unidirectional airflow workstation with computational fluid dynamics.

    Science.gov (United States)

    Ogawa, M

    2000-01-01

    A unidirectional airflow workstation for processing a sterile pharmaceutical product is required to be "Grade A," according to EU-GMP and WHO-GMP. These regulations have employed the wording of "laminar airflow" for unidirectional airflow, with an unclear definition given. This seems to have allowed many reports to describe discussion of airflow velocity only. The guidance values as to the velocity are expressed in various words of 90 ft/min, 0.45 m/sec, 0.3 m/sec, +/- 20%, or "homogeneous air speed." It has been also little clarified how variation in airflow velocity gives influences on contamination control of a workstation working with varying key characteristics, such as ceiling height, internal heat load, internal particle generation, etc. The present author has revealed following points from a case study using Computational Fluid Dynamics: the airflow characteristic in Grade A area shows no significant changes with varying the velocity of supplied airflow, and the particles generated from the operator will be exhausted outside Grade A area without contamination.

  5. Discriminating Between Tectonic and Climatic Controls on Early Hominin Paleoenvironments From the Koobi Fora Region, Northeastern Turkana Basin, Kenya: Part II

    Science.gov (United States)

    Quinn, R. L.; Lepre, C. J.

    2004-12-01

    Global climate is often elected as a catalyst for environmental change and used to characterize selective pressures acting on Plio-Pleistocene African hominins. Vrba's Habitat Theory (1992) and Pott's Variability Selection (1998) credit mammalian evolutionary pattern and process to global climate regulated by orbital forcing. Feibel (1999: 276) argues the need for a middle ground, tethering the "global-scale climatic phenomena" to "environmental change, habitat shift, and biotic evolution" and offers the basin as a scale for analysis. Feibel suggests that all basins are not created equal, and will respond to climate change with different sensitivities and thresholds. As such, interpretations of climate proxies must account for differences in basin size, climatic regime(s), topography, geology, and water availability when drawing relationships to global phenomena. Here we examine pedogenic carbonate isotopes (d13C, d18O) from the Plio-Pleistocene Koobi Fora Region to elucidate the differential influences of climate, tectonics, and deposition on ecological factors of early hominin evolution in the northeastern Turkana Basin of Kenya. One of the richest Plio-Pleistocene fossil localities in Africa, Koobi Fora has served as a setting for hominin evolution between 4.0 and 1.0 Ma. Numerous paleosols, stratigraphically controlled by tuffaceous marker beds, are preserved in the Plio-Pleistocene sediments of the Koobi Fora Formation. Cerling and others (1988) and Wynn (2000) conducted isotopic studies of pedogenic carbonates from the Plio-Pleistocene Omo Group deposits of the Turkana Basin. With these data Wynn (2004) demonstrates stepwise d13C shifts over the last 4.0 Ma, with marked events at 2.5 and 1.8 Ma, and interprets increased aridity on a basin scale due to comparable records on the east and west side of present Lake Turkana. In this study, we increased the sample size of the current database and conducted widespread sampling of synchronous lateral horizons in the

  6. Effects of gamma irradiation on pepper's volatile compounds sensory qualities and pest infestation control. Part of a coordinated programme in the Asian Regional Cooperative Project of Food Irradiation

    International Nuclear Information System (INIS)

    Khan, A.M.; Bahari Bin, I.

    1984-04-01

    The effects of gamma irradiation, packaging materials and storage time of black and white peppers on the infestation and reinfestation of microorganism and insects were evaluated. The samples were irradiated at the doses between 2 and 9 kGy. The packaging materials consisted of polypropylene woven bags laminated with thin polyethylene (PPE) and polyethylene bags (PE) of different thickness, 0.05, 01.2 and 0.17 mm. The jute bag was used as a control material. The changes of infestation and reinfestation status were observed for 6 months in Malaysia and for the next 2 months the changes were evaluated when the samples had reached Japan. Results obtained indicated that irradiation at a dose up to 9 kGy reduced the bacterial load of black pepper from 1.6x10 7 /g to 2 /g, while the dose of 6 kGy was required to reduce the population in white pepper from 2.3x10 4 /g to 2 /g. The original population of mould-yeast was relatively low (approx. 10 4 /g) and could be reduced to 2 /g at only 2 kGy. No problems and difficulties were faced with regard to the transportation of the peppers. However, prolonged storage time may encourage microbial growth, and 4 months of storage was a critical period for black pepper. Two species of Anobiidae infesting pepper had been identified, Lasioderma serricone (Fabricius) which made up 80% of the insect counts and Stegobium pamiceum (L.). However, at the doses applied and packaging materials used, there was no reinfestation for all but the material PPPE (no observation made for jute bags)

  7. Analysis of the phenomenon of over-the-counter drug abuse and not controlled herbs trade by polish adolescents: Part I

    Directory of Open Access Journals (Sweden)

    Daria Suchecka

    2017-06-01

    Full Text Available The phenomenon of stupefying by the use of available over-the-counter drugs (OTC among adolescents is an essential problem in both Poland and throughout the world. Popular analgesics, cold medicine and antihistamines contain psychedelic substances, such as dextromethorphan (DXM, pseudoephedrine/ephedrine, codeine (methylmorphine, dimenhydrinate, paracetamol (acetaminophren and others. Cases of fatal addiction to dextromethorphan, one of the active substances contained in medicines, e.g., the common cold, have been reported. The test results cited by the authors clearly indicate that the use of OTC drugs, whose turnover is not controlled is a domain of females. The extent of use of drugs not prescribed by a doctor has remained for many years at a constant level. The most common poisonings with OTC drugs are caused by those that affect the respiratory system or exert analgesic or antipyretic effects. They are also used in attempted suicides, especially among females. Analyzing poisonings caused by OTC medications their seasonality has been observed. Their number increases during spring–autumn. A territorial differentiation in areas of OTC drug trade in terms of their quantities, with the predominance of southern regions is also noted. Intoxication with psychoactive substances causes the deterioration of relations between young people. In the reviewed studies there is no detailed information on the composition of non-prescription medicines. Moreover, young people have easy access to mushroom fungi, growing in nearby forests and meadows that may have hallucinogenic effects and are available in pharmacies and on the Internet. Med Pr 2017;68(3:413–422

  8. A multi-center randomized controlled trial to compare a self-ligating bracket with a conventional bracket in a UK population: Part 1: Treatment efficiency.

    Science.gov (United States)

    O'Dywer, Lian; Littlewood, Simon J; Rahman, Shahla; Spencer, R James; Barber, Sophy K; Russell, Joanne S

    2016-01-01

    To use a two-arm parallel trial to compare treatment efficiency between a self-ligating and a conventional preadjusted edgewise appliance system. A prospective multi-center randomized controlled clinical trial was conducted in three hospital orthodontic departments. Subjects were randomly allocated to receive treatment with either a self-ligating (3M SmartClip) or conventional (3M Victory) preadjusted edgewise appliance bracket system using a computer-generated random sequence concealed in opaque envelopes, with stratification for operator and center. Two operators followed a standardized protocol regarding bracket bonding procedure and archwire sequence. Efficiency of each ligation system was assessed by comparing the duration of treatment (months), total number of appointments (scheduled and emergency visits), and number of bracket bond failures. One hundred thirty-eight subjects (mean age 14 years 11 months) were enrolled in the study, of which 135 subjects (97.8%) completed treatment. The mean treatment time and number of visits were 25.12 months and 19.97 visits in the SmartClip group and 25.80 months and 20.37 visits in the Victory group. The overall bond failure rate was 6.6% for the SmartClip and 7.2% for Victory, with a similar debond distribution between the two appliances. No significant differences were found between the bracket systems in any of the outcome measures. No serious harm was observed from either bracket system. There was no clinically significant difference in treatment efficiency between treatment with a self-ligating bracket system and a conventional ligation system.

  9. Endocrine system: part 1.

    Science.gov (United States)

    Johnstone, Carolyn; Hendry, Charles; Farley, Alistair; McLafferty, Ella

    2014-05-27

    This article, which forms part of the life sciences series and is the first of two articles on the endocrine system, examines the structure and function of the organs of the endocrine system. It is important that nurses understand how the endocrine system works and its role in maintaining health. The role of the endocrine system and the types, actions and control of hormones are explored. The gross structure of the pituitary and thyroid glands are described along with relevant physiology. Several disorders of the thyroid gland are outlined. The second article examines growth hormone, the pancreas and adrenal glands.

  10. Bonded versus vacuum-formed retainers: a randomized controlled trial. Part 1: stability, retainer survival, and patient satisfaction outcomes after 12 months.

    Science.gov (United States)

    Forde, Katherine; Storey, Madeleine; Littlewood, Simon J; Scott, Paul; Luther, Friedy; Kang, Jing

    2017-10-20

    There is a shortage of evidence on the best type of retainer. Evaluate upper and lower bonded retainers (BRs) versus upper and lower vacuum-formed retainers (VFRs) over 12 months, in terms of stability, retainer survival, and patient satisfaction. Two-arm parallel group multi-centre randomized controlled clinical trial. Sixty consecutive patients completing fixed appliance therapy and requiring retainers were recruited from 3 hospital departments. They were randomly allocated to either upper and lower labial segment BRs (n = 30) or upper and lower full-arch VFRs (n = 30). Primary outcome was stability. Secondary outcomes were retainer survival and patient satisfaction. A random sequence of treatment allocation was computer-generated and implemented by sealing in sequentially numbered opaque sealed envelopes independently prepared in advance. Patients, operators and outcome could not be blinded due to the nature of the intervention. Thirty patients received BRs (median [Mdn] age 16 years, inter-quartile range [IQR] = 2) and 30 received VFRs (Mdn age 17 years, IQR = 4). Baseline characteristics were similar between groups. At 12 months, there were no statistically significant inter-group differences in post-treatment change of maxillary labial segment alignment (BR = 1.1 mm, IQR = 1.56, VFR = 0.76 mm, IQR = 1.55, P = 0.61); however, there was greater post-treatment change in the mandibular VFR group (BR = 0.77 mm, IQR = 1.46, VFR = 1.69mm, IQR = 2.00, P = 0.008). The difference in maxillary retainer survival rates were statistically non-significant, P = 0.34 (BR = 63.6%, 239.3 days, 95% confidence interval [CI] = 191.1-287.5, VFR = 73.3%, 311.1 days, 95% CI = 278.3-344.29). The mandibular BR had a lower survival rate (P = 0.01) at 12 months (BR = 50%, 239.3 days 95% CI = 191.1-287.5, VFR = 80%, 324.9 days 95% CI = 295.4-354.4). More subjects with VFRs reported discomfort (P = 0.002) and speech difficulties (P = 0.004) but found them easier to clean than those with

  11. Optimización del sistema de control de las pequeñas centrales hidroeléctricas (segunda parte: Modelo matemático de optimización

    Directory of Open Access Journals (Sweden)

    Luis Jerónimo García Faure

    2011-02-01

    Full Text Available En la primera parte de este trabajo se pudo apreciar lo complejo que resulta el proceso de control de laspequeñas centrales hidroeléctricas (PCH mediante la regulación del gasto de agua por la cantidad devariables que en él intervienen. Esto trae como consecuencia que un mismo problema pueda tenermúltiples soluciones, por lo que los métodos de solución que normalmente se utilizan para determinar losparámetros de trabajo del regulador consideran constantes muchas de las variables, obteniéndose unasolución no optimizada del problema.  In the first part of this work it could appreciate the complex thing that is the control process of smallhydropower's (SHP by means of the regulation of the flow of water due to the great quantity of variablesthat intervene in it. This results in the fact that a given problem can have multiple solutions, because thesolution methods that are usually used to determine the parameters of work of the regulator cannot beapplied since they consider constant many of the variables. Therefore, the obtained solution in this waycannot optimize the problem.

  12. The use of radiation induced sterility for the control of the codling moth. Part of a coordinated programme on the use of the sterile male technique for the control of lepidopterous insects attacking fruit and forest trees

    International Nuclear Information System (INIS)

    Jermy, T.

    1977-12-01

    Studies were conducted from 1973 - 1977 in Hungary to obtain background information necessary for the implementation of sterile insect techniques (SIT) and pest management systems. The flight of the codling moth (CM), monitored by sex-pheromone traps, lasted from May to September. The two peaks (corresponding to the two generations per year) and the break between the two flights appeared blurred, i.e. control measures should be carried out nearly continuously during the whole season. The number of CM pairs was estimated by the release-recapture method as 100 to 500 per ha in mid-summer in an untreated orchard. Such naturally occurring low population levels could help initiating successful SIT against the CM even in not thoroughly treated apple stands. Mixed house gardens containing abandoned host trees have to be considered in Hungary as the main reservoir of the supposed ''semiwild type'' CM. Oak forests proved to harbour autonomous ''wild type'' CM populations on wild apple and sorb trees. The chemically well treated apple orchards have generally very low ''farm type'' CM populations. Natural occurrence of the CM granulosis virus in larvae developing in wild apples has been found. Transmission of the virus in laboratory rearings by the mite Tyrophagus putrescentiae was detected. Spraying with virus suspensions fully protected apples against the CM; however, no spread of the virus to neighbouring untreated trees was observed. Surveys for other major insect pests (Lepidoptera, aphids and scales) of apples were also made and the high population levels of several species in the untreated apple stands have been found indicating that (1) natural control generally cannot reduce these populations to an economically acceptable level, and (2) the SIT against the CM must be combined with chemical treatments or with selective methods against these species. Based on a theoretical analysis of economic aspects of the SIT for codling moth control, it was found that in Hungary

  13. Terminal area automatic navigation, guidance and control research using the Microwave Landing System (MLS). Part 5: Design and development of a Digital Integrated Automatic Landing System (DIALS) for steep final approach using modern control techniques

    Science.gov (United States)

    Halyo, N.

    1983-01-01

    The design and development of a 3-D Digital Integrated Automatic Landing System (DIALS) for the Terminal Configured Vehicle (TCV) Research Aircraft, a B-737-100 is described. The system was designed using sampled data Linear Quadratic Gaussian (LOG) methods, resulting in a direct digital design with a modern control structure which consists of a Kalman filter followed by a control gain matrix, all operating at 10 Hz. DIALS uses Microwave Landing System (MLS) position, body-mounted accelerometers, as well as on-board sensors usually available on commercial aircraft, but does not use inertial platforms. The phases of the final approach considered are the localizer and glideslope capture which may be performed simultaneously, localizer and steep glideslope track or hold, crab/decrab and flare to touchdown. DIALS captures, tracks and flares from steep glideslopes ranging from 2.5 deg to 5.5 deg, selected prior to glideslope capture. Digital Integrated Automatic Landing System is the first modern control design automatic landing system successfully flight tested. The results of an initial nonlinear simulation are presented here.

  14. A prospective, randomised, controlled, double-blind phase I-II clinical trial on the safety of A-Part® Gel as adhesion prophylaxis after major abdominal surgery versus non-treated group

    Directory of Open Access Journals (Sweden)

    Weis Christine

    2010-07-01

    Full Text Available Abstract Background Postoperative adhesions occur when fibrous strands of internal scar tissue bind anatomical structures to one another. The most common cause of intra-abdominal adhesions is previous intra-abdominal surgical intervention. Up to 74% of intestinal obstructions are caused by post surgical adhesions. Although a variety of methods and agents have been investigated to prevent post surgical adhesions, the problem of peritoneal adhesions remains largely unsolved. Materials serving as an adhesion barrier are much needed. Methods/Design This is a prospective, randomised, controlled, patient blinded and observer blinded, single centre phase I-II trial, which evaluates the safety of A-Part® Gel as an adhesion prophylaxis after major abdominal wall surgery, in comparison to an untreated control group. 60 patients undergoing an elective median laparotomy without prior abdominal surgery are randomly allocated into two groups of a 1:1- ratio. Safety parameter and primary endpoint of the study is the occurrence of wound healing impairment or peritonitis within 28 (+10 days after surgery. The frequency of anastomotic leakage within 28 days after operation, occurrence of adverse and serious adverse events during hospital stay up to 3 months and the rate of adhesions along the scar within 3 months are defined as secondary endpoints. After hospital discharge the investigator will examine the enrolled patients at 28 (+10 days and 3 months (±14 days after surgery. Discussion This trial aims to assess, whether the intra-peritoneal application of A-Part® Gel is safe and efficacious in the prevention of post-surgical adhesions after median laparotomy, in comparison to untreated controls. Trial registration NCT00646412

  15. Quality control analysis : part I : asphaltic concrete.

    Science.gov (United States)

    1964-11-01

    This report deals with the statistical evaluation of results from several hot mix plants to determine the pattern of variability with respect to bituminous hot mix characteristics. : Individual tests results when subjected to frequency distribution i...

  16. Injury Control Part 2: Strategies for Prevention

    Science.gov (United States)

    2000-01-01

    the cumulative effect of sustaining repeated blows to the head may still result in long-term neurological consequences or even death. Risk...military and civilian worlds include the following: ■ a ban on assault weapons ■ the elimination of trampolines in secondary schools ■ a ban on the...Hoffman, M. Cook, and L Stallones. Relationship of helmet use and head injuries among motorcycle crash victims in El Paso County, Colorado, 1989-1990

  17. Radiation protection at the RA Reactor in 1986, Part -2, Annex 1, Radioactivity control of working environment, dosimetry; Deo 2 - Prilog 1 - Kontrola radne sredine - poslovi dozimetrije i tehnicke zastite od zracenja kod reaktora RA

    Energy Technology Data Exchange (ETDEWEB)

    Ninkovic, M; Bjelanovic, J; Minincic, Z; Komatina, R; Raicevic, J [Institute of Nuclear Sciences Boris Kidric, Vinca, Beograd (Serbia and Montenegro)

    1986-12-01

    This report contains data and analysis of the of measured sample results collected during radiation protection control in the working environment of the RA reactor. First part contains basic exposure values and statistical review of the the total number of radiation measurements. It includes contents of radioactive gasses and effluents in the air, as well as the level of surface contamination of clothes and uncovered parts of the personnel bodies. Second part deals with the analysis of personnel doses. It was found that the maximum individual dose from external irradiation amounted to 20.5 mSV during past 10 months. Individual exposures for 7/10 of the personnel were less than 1/10 of the annual permissible exposure. Data are compared to radiation doses for last year and previous five years. Third part of this annex contains basic data about the quantity of collected radioactive waste, total quantity of contaminated and decontaminated surfaces. The last part analyzes accidents occurred at the reactor during 1986. It was found that there have been no accidents that could cause significant contamination of working surfaces and components nor radiation exposure of the personnel. [Serbo-Croat] U ovom izvestaju prikazani su i analizirani reprezentativni rezultati sakupljeni u okviru kontrole radne sredine i tehnicke zastite od zracenja reaktora RA. U prvom delu izvestaja izlozeni su podaci o osnovnim vidovima izlaganja zracenju i statisticki pregled ukupnog broja radiacionih merenja. Dati su takodje rezultati merenja sadrzaja radioktivnih gasova i aerosola u vazduhu, kao i stepena kontaminacije povrsina, odece i otkrivenih delova tela osoblja. U drugom delu izvestaja izlozeni su rezultati analize ozracivanja radnog osoblja. Utvrdjeno je da je maksimalna individualna doza spoljasnjeg izlaganja u proteklih 10 meseci bila 20,5 mSv, a da su pojadinacna izlaganja vise od 7/10 radnog osoblja bila manja od 1/10 godisnje granicne vrednosti. Dati su takodje uporedni podaci o

  18. Implementación de medidas de prevención y control de riesgo ergonómico por levantamiento de pesos y posturas forzadas en la parte operativa de un centro de distribución de alimentos.

    OpenAIRE

    León Echeverría, Elsi Verónica

    2016-01-01

    El presente trabajo se realizó con el objetivo de implementar medidas de prevención y control de los riesgos ergonómicos, particularmente por levantamiento de pesos y posturas forzadas en la parte operativa de un centro de distribución de alimentos. Para la evaluación de posturas forzadas se empleó el Método REBA: Evaluación Rápida de Cuerpo Entero (Rapid Entire Body Assessment) y para la evaluación del levantamiento de pesos en tareas simples se empleó la Guía Técnica para La Evaluación y Pr...

  19. Compromised quality of life in adult patients who have received a radiation dose towards the basal part of the brain. A case-control study in long-term survivors from cancer in the head and neck region

    Directory of Open Access Journals (Sweden)

    Löfdahl Elisabet

    2012-10-01

    Full Text Available Abstract Background Adult patients with hypothalamic-pituitary disorders have compromised quality of life (QoL. Whether this is due to their endocrine consequences (hypopituitarism, their underlying hypothalamic-pituitary disorder or both is still under debate. The aim of this trial was to measure quality of life (QoL in long-term cancer survivors who have received a radiation dose to the basal part of the brain and the pituitary. Methods Consecutive patients (n=101 treated for oropharyngeal or epipharyngeal cancer with radiotherapy followed free of cancer for a period of 4 to10 years were identified. Fifteen patients (median age 56 years with no concomitant illness and no hypopituitarism after careful endocrine evaluation were included in a case-control study with matched healthy controls. Doses to the hypothalamic-pituitary region were calculated. QoL was assessed using the Symptom check list (SCL-90, Nottingham Health Profile (NHP, and Psychological Well Being (PGWB questionnaires. Level of physical activity was assessed using the Baecke questionnaire. Results The median accumulated dose was 1.9 Gy (1.5–2.2 Gy to the hypothalamus and 2.4 Gy (1.8–3.3 Gy to the pituitary gland in patients with oropharyngeal cancer and 6.0–9.3 Gy and 33.5–46.1 Gy, respectively in patients with epipharyngeal cancer (n=2. The patients showed significantly more anxiety and depressiveness, and lower vitality, than their matched controls. Conclusion In a group of long time survivors of head and neck cancer who hade received a low radiation dose to the hypothalamic-pituitary region and who had no endocrine consequences of disease or its treatment QoL was compromised as compared with well matched healthy controls.

  20. Compromised quality of life in adult patients who have received a radiation dose towards the basal part of the brain. A case-control study in long-term survivors from cancer in the head and neck region.

    Science.gov (United States)

    Löfdahl, Elisabet; Berg, Gertrud; Johansson, Karl-Axel; Zachrisson, Maria Leonsson; Malmgren, Helge; Mercke, Claes; Olsson, Erik; Wiren, Lena; Johannsson, Gudmundur

    2012-10-29

    Adult patients with hypothalamic-pituitary disorders have compromised quality of life (QoL). Whether this is due to their endocrine consequences (hypopituitarism), their underlying hypothalamic-pituitary disorder or both is still under debate. The aim of this trial was to measure quality of life (QoL) in long-term cancer survivors who have received a radiation dose to the basal part of the brain and the pituitary. Consecutive patients (n=101) treated for oropharyngeal or epipharyngeal cancer with radiotherapy followed free of cancer for a period of 4 to10 years were identified. Fifteen patients (median age 56 years) with no concomitant illness and no hypopituitarism after careful endocrine evaluation were included in a case-control study with matched healthy controls. Doses to the hypothalamic-pituitary region were calculated. QoL was assessed using the Symptom check list (SCL)-90, Nottingham Health Profile (NHP), and Psychological Well Being (PGWB) questionnaires. Level of physical activity was assessed using the Baecke questionnaire. The median accumulated dose was 1.9 Gy (1.5-2.2 Gy) to the hypothalamus and 2.4 Gy (1.8-3.3 Gy) to the pituitary gland in patients with oropharyngeal cancer and 6.0-9.3 Gy and 33.5-46.1 Gy, respectively in patients with epipharyngeal cancer (n=2). The patients showed significantly more anxiety and depressiveness, and lower vitality, than their matched controls. In a group of long time survivors of head and neck cancer who hade received a low radiation dose to the hypothalamic-pituitary region and who had no endocrine consequences of disease or its treatment QoL was compromised as compared with well matched healthy controls.

  1. Compromised quality of life in adult patients who have received a radiation dose towards the basal part of the brain. A case-control study in long-term survivors from cancer in the head and neck region

    International Nuclear Information System (INIS)

    Löfdahl, Elisabet; Berg, Gertrud; Johansson, Karl-Axel; Zachrisson, Maria Leonsson; Malmgren, Helge; Mercke, Claes; Olsson, Erik; Wiren, Lena; Johannsson, Gudmundur

    2012-01-01

    Adult patients with hypothalamic-pituitary disorders have compromised quality of life (QoL). Whether this is due to their endocrine consequences (hypopituitarism), their underlying hypothalamic-pituitary disorder or both is still under debate. The aim of this trial was to measure quality of life (QoL) in long-term cancer survivors who have received a radiation dose to the basal part of the brain and the pituitary. Consecutive patients (n=101) treated for oropharyngeal or epipharyngeal cancer with radiotherapy followed free of cancer for a period of 4 to10 years were identified. Fifteen patients (median age 56 years) with no concomitant illness and no hypopituitarism after careful endocrine evaluation were included in a case-control study with matched healthy controls. Doses to the hypothalamic-pituitary region were calculated. QoL was assessed using the Symptom check list (SCL)-90, Nottingham Health Profile (NHP), and Psychological Well Being (PGWB) questionnaires. Level of physical activity was assessed using the Baecke questionnaire. The median accumulated dose was 1.9 Gy (1.5–2.2 Gy) to the hypothalamus and 2.4 Gy (1.8–3.3 Gy) to the pituitary gland in patients with oropharyngeal cancer and 6.0–9.3 Gy and 33.5–46.1 Gy, respectively in patients with epipharyngeal cancer (n=2). The patients showed significantly more anxiety and depressiveness, and lower vitality, than their matched controls. In a group of long time survivors of head and neck cancer who hade received a low radiation dose to the hypothalamic-pituitary region and who had no endocrine consequences of disease or its treatment QoL was compromised as compared with well matched healthy controls

  2. Experiencing control

    NARCIS (Netherlands)

    Monaci, G.; Braspenning, R.A.C.; Meerbeek, B.W.; Bingley, P.; Rajagopalan, R.; Triki, M.

    2009-01-01

    This report describes the activities carried out in the first part of the Experiencing Control project (2008-324). The guiding idea of the project is to make control part of the experience, exploring new interaction solutions for complex, engaging interactions with Philips devices in the living

  3. The use of radiation induced sterility for the control of the moths Laspeyresia pomonella L. and Laspeyresia molesta B. Part of a coordinated programme on the control of lepidopterous insects by the sterile male technique

    International Nuclear Information System (INIS)

    Tzalev, M.

    1979-05-01

    Various artificial media based on wheat germ-agar were evaluated for their suitability in rearing larvae of the codling-moth Laspeyresia pomonella L. and the oriental fruit moth Laspeyresia molesta B. A medium of green apples was used as a control. All larval media evaluated for the codling-moth produced comparable results; slightly better results, however, were obtained with a medium in which a mixture of apple puree, oat germs, milk and sugar had been added, and with the green apples alone. Similar results were also obtained with the oriental fruit moth; in this instance, however, the medium containing the apple puree etc. was slightly inferior. Media under cover maintained favourable condition for larval development for more than 40 days. On the other hand, uncovered media dessicated rapidly and consequently were unfavourable for larval development. In field ecological studies it was observed that the number of oriental fruit moths in trap catches declined when the rainfall exceeded 5 mm or the temperature fell below 10 0 C

  4. Aplicación de las técnicas de hardware reconfigurable en un sistema digital de control dinámico. Aplicación práctica Parte II; Application of Programmable Hardware Techniques of Digital Control System Development. Workable Application. Second Part

    Directory of Open Access Journals (Sweden)

    Dennis Arce López

    2011-02-01

    Full Text Available Se presenta la aplicación práctica del diseño electrónico en el desarrollo de un sistema de control dinámicode un servomotor lo cual es una novedad científico-técnica en el campo de la energética y en la defensanacional. En el trabajo se expone la funcionalidad y estructura del hardware programable, así como losresultados parciales de la simulación. This paper describes the design of a dynamic control system for servomotor making use of new electronicdevelopment techniques, and represents a novelty on energetic field and national defence. Also describesstructure and functionality of programmable hardware, and partial results of simulation.

  5. Radiation protection at the RA Reactor in 1988, Part -2, Annex 1, Radioactivity control of working environment, dosimetry; Deo 2 - Prilog 1 - Kontrola radne sredine - poslovi dozimetrije i tehnicke zastite od zracenja kod reaktora RA

    Energy Technology Data Exchange (ETDEWEB)

    Ninkovic, M; Bjelanovic, J; Minincic, Z; Glodic, S; Raicevic, J [Institute of Nuclear Sciences Boris Kidric, Vinca, Beograd (Serbia and Montenegro)

    1988-12-15

    This report contains data and analysis of the of measured sample results collected during radiation protection control in the working environment of the RA reactor. First part contains basic exposure values and statistical review of the the total number of radiation measurements. It includes contents of radioactive gasses and effluents in the air, as well as the level of surface contamination of clothes and uncovered parts of the personnel bodies. Second part deals with the analysis of personnel doses. It was found that the maximum individual dose from external irradiation amounted was less than 0.5 mSv during past 10 months. Individual exposures for 9/10 of the personnel were less than 1/10 of the annual permissible exposure. Data are compared to radiation doses for last year and previous five years. Third part of this annex contains basic data about the quantity of collected radioactive waste, total quantity of contaminated and decontaminated surfaces. During 1988 there have been no accidents that could cause significant contamination of working surfaces and components nor radiation exposure of the personnel. [Serbo-Croat] U ovom izvestaju prikazani su analizirani reprezentativni rezultati sakupljeni u okviru kontrole radne sredine i tehnicke zastite od zracenja reaktora RA. U prvom delu izvestaja izlozeni su podaci o osnovnim vidovima izlaganja zracenju i statisticki pregled ukupnog broja radijacionih merenja. Dati su takodje rezultati merenja sadrzaja radioktivnih gasova i aerosola u vazduhu, kao i stepena kontaminacije povrsina, odece i otkrivenih delova tela osoblja. U drugom delu izvestaja izlozeni su rezultati analize ozracivanja radnog osoblja. Utvrdjeno je da je maksimalna individualna doza spoljasnjeg izlaganja u proteklih 10 meseci bila 0,5 mSv, a da su pojedinacna izlaganja vise od 9/10 radnog osoblja bila manja od 1/10 godisnje granicne vrednosti. Dati su takodje uporedni podaci o ozracivanju osoblja u prethodnoj, kao i u pet proteklih godina, iz

  6. Special Nuclear Material Control by the Power Reactor Operator; Controle des Matieres Nucleaires Speciales par l'Exploitant d'une Centrale Nucleaire; Spetsial'nyj kontrol' nalichiya yadernykh materialov operatorom ehnergeticheskogo reaktora; Control de Materiales Nucleares Especiales por Parte de Quienes Operan el Reactor de Potencia

    Energy Technology Data Exchange (ETDEWEB)

    Cordin, R. A. [Yankee Atomic Electric Company, Boston, MA (United States)

    1966-02-15

    A relatively new and extremely valuable fuel for electric power production, uranium, requires very careful inventory control from the time the reactor operator assumes financial responsibility for this material until, as partially expended fuel, it is transferred to another facility and the remaining part of its initial value is recovered. Most power reactor operators were operating fossil-fuelled power plants before the advent of nuclear power and have long since established rather complete and adequate controls for these fossil fuels. The reactor operator must have no less adequate controls for the special nuclear material used in his nuclear plant. Power reactor, operation is not an ancient science and during its relatively short history our engineers and scientists have been constantly improving plant designs and methods of operation to reduce costs and make our nuclear plants competitive with fossil-fuelled conventional plants. Nuclear material management must be as modern and efficient as is humanly possible to ensure that technological advances leading to reduced costs are not lost by poor handling of nuclear fuel and the records pertaining to fuel inventory. Nuclear material management requires the maintaining of complete and informative records by the power reactor operator. These records need not be complex to satisfy the criteria of completeness and adequacy. In fact, simplicity is extremely desirable. Despite the fact that nuclear fuel is new and completely different to our conventional fuels no mystery should be attached thereto. Nuclear material control as part of nuclear material management is not limited to simple inventory work but it is the basis for a great deal of other activity that is an inherent part of any power reactor operations such as irradiated fuel shipments, reprocessing of spent fuel, with its associated accounting for reclaimed fuel and material produced during reactor operation, and the establishing and maintaining of an adequate

  7. Part C and Part D Compliance Actions

    Data.gov (United States)

    U.S. Department of Health & Human Services — This page includes results from CMSs Past Performance Review. The report called Spring 2014 Past Performance Review Outlier Results lists MA organizations and Part D...

  8. Control of dynamic properties of InAs/InAlGaAs/InP hybrid quantum well-quantum dot structures designed as active parts of 1.55 μm emitting lasers

    Energy Technology Data Exchange (ETDEWEB)

    Rudno-Rudzinski, Wojciech; Syperek, Marcin; Marynski, Aleksander; Andrzejewski, Janusz; Misiewicz, Jan; Sek, Grzegorz [Faculty of Fundamental Problems of Technology, Department of Experimental Physics, Wroclaw University of Science and Technology, Wroclaw (Poland); Bauer, Sven; Sichkovskyi, Vitalii I.; Reithmaier, Johann P. [Institute of Nanostructure Technology and Analytics, CINSaT, University of Kassel (Germany); Schowalter, Marco; Gerken, Beeke; Rosenauer, Andreas [Institute of Solid State Physics, Universitaet Bremen (Germany)

    2018-02-15

    The molecular beam epitaxy grown structures are investigated, comprising of InGaAs quantum wells (QW) separated by a thin InGaAlAs barrier from InAs quantum dots (QDs), emitting at 1.55 μm, grown on an InP substrate. To control the coupling between QW and QD parts the thickness of the barrier is changed, which commands the wave function overlap. The tuning of that parameter allows for the study of the influence of the QW potential on the energy structure of states and their wave functions in QDs, changing from an uncoupled system, where the optical response is just a sum of responses from two isolated elements, to a strongly quantum mechanically coupled system, exhibiting mixed 2D-0D characteristics. The changes of the energy structure that are deduced from the photoreflectance and photoluminescence spectroscopy results, supported by 8-band k . p modeling, explain the measured differences in the photoluminescence decay times between samples with different barrier thicknesses. (copyright 2017 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  9. A statistical rain attenuation prediction model with application to the advanced communication technology satellite project. Part 2: Theoretical development of a dynamic model and application to rain fade durations and tolerable control delays for fade countermeasures

    Science.gov (United States)

    Manning, Robert M.

    1987-01-01

    A dynamic rain attenuation prediction model is developed for use in obtaining the temporal characteristics, on time scales of minutes or hours, of satellite communication link availability. Analagous to the associated static rain attenuation model, which yields yearly attenuation predictions, this dynamic model is applicable at any location in the world that is characterized by the static rain attenuation statistics peculiar to the geometry of the satellite link and the rain statistics of the location. Such statistics are calculated by employing the formalism of Part I of this report. In fact, the dynamic model presented here is an extension of the static model and reduces to the static model in the appropriate limit. By assuming that rain attenuation is dynamically described by a first-order stochastic differential equation in time and that this random attenuation process is a Markov process, an expression for the associated transition probability is obtained by solving the related forward Kolmogorov equation. This transition probability is then used to obtain such temporal rain attenuation statistics as attenuation durations and allowable attenuation margins versus control system delay.

  10. Pushing for Part Time.

    Science.gov (United States)

    Geber, Beverly

    1987-01-01

    More employees are choosing to work part time. Although this trend started because of working women, some men are choosing part-time positions. Part-time employees forfeit salary and promotion potential, yet most feel the trade is fair and that they are more productive during their working hours. (CH)

  11. The scaffold protein calcium/calmodulin-dependent serine protein kinase controls ATP release in sensory ganglia upon P2X3 receptor activation and is part of an ATP keeper complex.

    Science.gov (United States)

    Bele, Tanja; Fabbretti, Elsa

    2016-08-01

    P2X3 receptors, gated by extracellular ATP, are expressed by sensory neurons and are involved in peripheral nociception and pain sensitization. The ability of P2X3 receptors to transduce extracellular stimuli into neuronal signals critically depends on the dynamic molecular partnership with the calcium/calmodulin-dependent serine protein kinase (CASK). The present work used trigeminal sensory neurons to study the impact that activation of P2X3 receptors (evoked by the agonist α,β-meATP) has on the release of endogenous ATP and how CASK modulates this phenomenon. P2X3 receptor function was followed by ATP efflux via Pannexin1 (Panx1) hemichannels, a mechanism that was blocked by the P2X3 receptor antagonist A-317491, and by P2X3 silencing. ATP efflux was enhanced by nerve growth factor, a treatment known to potentiate P2X3 receptor function. Basal ATP efflux was not controlled by CASK, and carbenoxolone or Pannexin silencing reduced ATP release upon P2X3 receptor function. CASK-controlled ATP efflux followed P2X3 receptor activity, but not depolarization-evoked ATP release. Molecular biology experiments showed that CASK was essential for the transactivation of Panx1 upon P2X3 receptor activation. These data suggest that P2X3 receptor function controls a new type of feed-forward purinergic signaling on surrounding cells, with consequences at peripheral and spinal cord level. Thus, P2X3 receptor-mediated ATP efflux may be considered for the future development of pharmacological strategies aimed at containing neuronal sensitization. P2X3 receptors are involved in sensory transduction and associate to CASK. We have studied in primary sensory neurons the molecular mechanisms downstream P2X3 receptor activation, namely ATP release and partnership with CASK or Panx1. Our data suggest that CASK and P2X3 receptors are part of an ATP keeper complex, with important feed-forward consequences at peripheral and central level. © 2016 International Society for Neurochemistry.

  12. Physical properties of root cementum: Part 16. Comparisons of root resorption and resorption craters after the application of light and heavy continuous and controlled orthodontic forces for 4, 8, and 12 weeks.

    Science.gov (United States)

    Paetyangkul, Anchalee; Türk, Tamer; Elekdağ-Türk, Selma; Jones, Allan S; Petocz, Peter; Cheng, Lam L; Darendeliler, M Ali

    2011-03-01

    Orthodontic force duration can affect the severity of root resorption. The aim of this clinical study was to investigate the amounts of root resorption volumetrically after the application of controlled light and heavy forces in the buccal direction for 4, 8, and 12 weeks. The sample consisted of 54 maxillary first premolars in 36 patients (mean age, 14.9 years; 21 girls, 15 boys) who required first premolar extractions as part of their orthodontic treatment. The teeth were allocated into 3 groups that varied in the duration of force application: 4, 8, or 12 weeks. The right or left first premolars were randomly selected to receive 2 levels of forces. A light buccally directed orthodontic force of 25 g was applied to the experimental tooth on 1 side, while a heavy orthodontic force of 225 g was applied on the contralateral premolar. At the end of the experimental period, the teeth were extracted and scanned with the microcomputed-tomography x-ray system. Resorption crater analysis was performed with specially designed software for direct volumetric measurements. Significant differences in the extent of root resorption were found between 4, 8, and 12 weeks of force application (P resorption in the longer force duration groups. The light force produced significantly less root resorption than did the heavy force. After 4, 8, or 12 weeks of buccally directed orthodontic forces applied on the maxillary first premolars, the volumes of root resorption craters were found to be related to the duration and the magnitude of the forces. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  13. Nuclear reactor with scrammable part length rod

    International Nuclear Information System (INIS)

    Bevilacqua, F.

    1979-01-01

    A new part length rod is provided. It may be used to control xenon induced power oscillations but to contribute to shutdown reactivity when a rapid shutdown of the reactor is required. The part length rod consists of a control rod with three regions. The lower control region is a longer weaker active portion separated from an upper stronger shorter poison section by an intermediate section which is a relative non-absorber of neutrons. The combination of the longer weaker control section with the upper high worth poison section permits the part length rod of this to be scrammed into the core when a reactor shutdown is required but also permits the control rod to be used as a tool to control power distribution in both the axial and radial directions during normal operation

  14. Part-Time Faculty Satisfaction at Two-Year Public Postsecondary Institutions: A Comparison of Involuntary Part-Time, Voluntary Part-Time, and Full-Time Faculty

    Science.gov (United States)

    Kinchen, Nancy Huval

    2010-01-01

    Part-time faculty members represent the majority of faculty at public two-year postsecondary institutions. Utilizing part-time faculty enables two-year institutions to control their instructional costs and maintain scheduling flexibility. However, part-time faculty are diverse in regards to their employment preference, some prefer part-time…

  15. Standard biological parts knowledgebase.

    Directory of Open Access Journals (Sweden)

    Michal Galdzicki

    2011-02-01

    Full Text Available We have created the Knowledgebase of Standard Biological Parts (SBPkb as a publically accessible Semantic Web resource for synthetic biology (sbolstandard.org. The SBPkb allows researchers to query and retrieve standard biological parts for research and use in synthetic biology. Its initial version includes all of the information about parts stored in the Registry of Standard Biological Parts (partsregistry.org. SBPkb transforms this information so that it is computable, using our semantic framework for synthetic biology parts. This framework, known as SBOL-semantic, was built as part of the Synthetic Biology Open Language (SBOL, a project of the Synthetic Biology Data Exchange Group. SBOL-semantic represents commonly used synthetic biology entities, and its purpose is to improve the distribution and exchange of descriptions of biological parts. In this paper, we describe the data, our methods for transformation to SBPkb, and finally, we demonstrate the value of our knowledgebase with a set of sample queries. We use RDF technology and SPARQL queries to retrieve candidate "promoter" parts that are known to be both negatively and positively regulated. This method provides new web based data access to perform searches for parts that are not currently possible.

  16. Standard Biological Parts Knowledgebase

    Science.gov (United States)

    Galdzicki, Michal; Rodriguez, Cesar; Chandran, Deepak; Sauro, Herbert M.; Gennari, John H.

    2011-01-01

    We have created the Knowledgebase of Standard Biological Parts (SBPkb) as a publically accessible Semantic Web resource for synthetic biology (sbolstandard.org). The SBPkb allows researchers to query and retrieve standard biological parts for research and use in synthetic biology. Its initial version includes all of the information about parts stored in the Registry of Standard Biological Parts (partsregistry.org). SBPkb transforms this information so that it is computable, using our semantic framework for synthetic biology parts. This framework, known as SBOL-semantic, was built as part of the Synthetic Biology Open Language (SBOL), a project of the Synthetic Biology Data Exchange Group. SBOL-semantic represents commonly used synthetic biology entities, and its purpose is to improve the distribution and exchange of descriptions of biological parts. In this paper, we describe the data, our methods for transformation to SBPkb, and finally, we demonstrate the value of our knowledgebase with a set of sample queries. We use RDF technology and SPARQL queries to retrieve candidate “promoter” parts that are known to be both negatively and positively regulated. This method provides new web based data access to perform searches for parts that are not currently possible. PMID:21390321

  17. Standard biological parts knowledgebase.

    Science.gov (United States)

    Galdzicki, Michal; Rodriguez, Cesar; Chandran, Deepak; Sauro, Herbert M; Gennari, John H

    2011-02-24

    We have created the Knowledgebase of Standard Biological Parts (SBPkb) as a publically accessible Semantic Web resource for synthetic biology (sbolstandard.org). The SBPkb allows researchers to query and retrieve standard biological parts for research and use in synthetic biology. Its initial version includes all of the information about parts stored in the Registry of Standard Biological Parts (partsregistry.org). SBPkb transforms this information so that it is computable, using our semantic framework for synthetic biology parts. This framework, known as SBOL-semantic, was built as part of the Synthetic Biology Open Language (SBOL), a project of the Synthetic Biology Data Exchange Group. SBOL-semantic represents commonly used synthetic biology entities, and its purpose is to improve the distribution and exchange of descriptions of biological parts. In this paper, we describe the data, our methods for transformation to SBPkb, and finally, we demonstrate the value of our knowledgebase with a set of sample queries. We use RDF technology and SPARQL queries to retrieve candidate "promoter" parts that are known to be both negatively and positively regulated. This method provides new web based data access to perform searches for parts that are not currently possible.

  18. Loose part monitoring device

    International Nuclear Information System (INIS)

    Nomura, Hiroshi.

    1992-01-01

    The device of the present invention estimates a place where loose parts occur and structural components as the loose parts in a fluid flow channel of a reactor device, to provide information thereof to a plant operator. That is, the device of the present invention comprises (1) a plurality of detectors disposed to each of equipments constituting fluid channels, (2) an abnormal sound sensing device for sensing signals from the detectors, (3) an estimation section for estimating the place where the loose parts occur and the structural components thereof based on the signals sensed by the abnormal sound sensing section, (4) a memory section for storing data of the plant structure necessary for the estimation, and (5) a display section for displaying the result of the estimation. In such a device, the position where the loose parts collide against the plant structural component and the energy thereof are estimated. The dropping path of the loose parts is estimated from the estimation position. Parts to be loose parts in the path are listed up. The parts on the list is selected based on the estimated energy thereby enabling to determine the loose parts. (I.S.)

  19. [Neurology! Adieau? (Part 2)].

    Science.gov (United States)

    Szirmai, Imre

    2010-05-30

    The education of neurologists is debilitated worldwide. University professors are engaged in teaching, research and patient-care. This triple challenge is very demanding, and results in permanent insecurity of University employees. To compensate for the insufficient clinical training, some institutes in the USA employ academic staff members exclusively for teaching. The formation of new subspecialties hinders the education and training of general neurologists. At present, four generations of medical doctors are working together in hospitals. The two older generations educate the younger neurologists who have been brought up in the world of limitless network of sterile information. Therefore their manual skills at the bedside and their knowledge of emergency treatment are deficient. Demographics of medical doctors changed drastically. Twice as many women are working in neurology and psychiatry than men. Integrity of neurology is threatened by: (1) Separation of the cerebrovascular diseases from general neurology. Development of "stroke units" was facilitated by the better reimbursement for treatment and by the interest of the pharmaceutical companies. Healthcare politics promoted the split of neurology into two parts. The independent status of "stroke departments" will reduce the rest of clinical neurology to outpatient service. (2) The main argumentation to segregate the rare neurological diseases was that their research will provide benefit for the diseases with high prevalence. This argumentation serves territorial ambitions. The separation of rare diseases interferes with the teaching of differential diagnostics in neurological training. The traditional pragmatic neurology can not be retrieved. The faculty of neurology could retain its integrity by the improvement of diagnostic methods and the ever more effective drugs. Nevertheless, even the progression of neurological sciences induces dissociation of clinical neurology. Neurology shall suffer fragmentation if

  20. Introduction to Part 3

    DEFF Research Database (Denmark)

    Petersen, Nils Holger

    2015-01-01

    A brief contextualising discussion of Western Music History and its relations to Theological Aesthetical Thought since Carolingian Times as an introduction to 3 music articles in Part 3 of the volume.......A brief contextualising discussion of Western Music History and its relations to Theological Aesthetical Thought since Carolingian Times as an introduction to 3 music articles in Part 3 of the volume....

  1. Matrix comparison, Part 2

    DEFF Research Database (Denmark)

    Schneider, Jesper Wiborg; Borlund, Pia

    2007-01-01

    The present two-part article introduces matrix comparison as a formal means for evaluation purposes in informetric studies such as cocitation analysis. In the first part, the motivation behind introducing matrix comparison to informetric studies, as well as two important issues influencing such c...

  2. Play your part

    CERN Document Server

    Ramsey, Gaynor

    1978-01-01

    Play your part is a collection of then situations in which students have to take on the roles of particular people and express their opinions, feelings or arguments about the situation. Play your part is intended for use with advanced students of English.

  3. Better utilisation of district heating systems. Subproject Hanover-Hamburg: 'Analysis of the control characteristics of district heating grids'. Part 1: Optimisation of automatic pump control for fast load variations. Part 2: Automation of district heating pumps at the man-machine communication interface. Part 3: Installation and adaptation of the BoFiT program system (Hanover only). Final report; Bessere Ausnutzung von Fernwaermeanlagen. Teilprojekt Hannover-Hamburg: 'Analyse des Regelverhaltens von Fernwaermenetzen'. T. 1: Optimieren einer automatischen Pumpensteuerung auf schnelle Lastwechsel. T. 2: Darstellen der Automatisierungseinrichtungen von Fernwaermepumpen an der Mensch-Maschine-Kommunikationsschnittstelle (MMK). T. 3: Installation und Anpassung des Programmsystems BoFiT (nur Hannover). Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Tuchs, M.; Beecken, J.; Hilmer, W.; Oel, M.; Schaper, H.; Micus, W.; Tegeler, C.; Ridder, M.; Schoettker, P.; Rogalla, B.U.; Feuerriegel, S.

    2000-07-01

    The general target of the interconnection research intention is discovering margins for optimizing the heat consumption by fast and ensured variation between producers with CHP generation plants and plants for primary heat and reverse. The project is subdivided in three parts: In part 1 the usefulness of automated operation of the communal distributed heating net-work was determined by: Comparison of real measurements with simulated processes calculations of the differential control processes, development and analysis of a control process concept and improvement of the existing controler action in the Hamburg and the Hannover model, investigations of the effects of closed loop control on safety and portrayal of the processes during optimised and automated operation. The advantage of this system can be demonstrated to be both economical and ecological. Safety analysis showed that a higher degree of automation does not compromise safe operation. In Hamburg these findings led to the development of a training simulator for the operating personnel. The optimisation techniques presented in part 1 can therefore be implemented in a model, which provides a very good analogy to the real network. In part 2 innovative forms of presentation of hydraulic relations of the controled District Heating network where developed. They where realised in a computer program. This program was installed in the District Heating control room. The target of part 3 is the practical application of BoFit for the generation of optimized propositions for operation mode of the District Heating net-work. The consideration of the actual condition of the District Heating network was realized by online-connection to the process data processing. The situation of costs of heat supply is found out by simulations for the present moment and for a prognosted period. (orig.)

  4. Alta conectividad genética y expansión poblacional de Scomber japonicus en en la parte norte del Sistema de Corriente de Humboldt reveladas por secuencias de la región control mitocondrial

    Directory of Open Access Journals (Sweden)

    Sergio Paolo Barahona Padilla

    2017-07-01

    Full Text Available La caballa, Scomber japonicus soporta una pesquería importante en el Pacífico Sudeste, sin embargo, su genética de poblaciones se desconoce actualmente. En el presente estudio se examinó la estructura genética, el flujo génico y la demografía histórica de esta especie en la parte norte del Sistema de la Corriente de Humboldt. Las muestras fueron colectadas en los veranos del 2013 y 2014 en tres puntos de desembarco de pesca (Paita, Ventanilla e Ilo cubriendo 12 grados de latitud frente a la costa peruana. Se secuenció un segmento de 532 pb de la región control mitocondrial en 72 individuos, el cual permitió detectar un total de 29 sitios polimórficos, 35 haplotipos, niveles moderados altos de diversidad haplotípica (0.793 – 0.969 y muy bajos niveles de diversidad nucleotídica (0.004 – 0.008. El análisis de flujo génico mostró altos niveles de conectividad entre las poblaciones en las áreas de muestreo. El análisis de varianza molecular (ФST = 0.00868, P = 0.1837, las comparaciones ФST a pares de poblaciones y las pruebas de diferenciación genética confirmaron la carencia de estructuración genética entre las tres localidades. Estos análisis sugieren que los sitios de muestreo analizados pueden ser considerados como un solo grupo genético. El comportamiento migratorio, el alto potencial de dispersión de los estadios tempranos de desarrollo y la ausencia de barreras oceanográficas pueden explicar su homogeneidad genética a lo largo del mar peruano. También se examinó la demografía histórica. Las pruebas de neutralidad, la distribución mismatch y el Bayesian Skyline Plot sugirieron un escenario de expansión poblacional que tuvo lugar durante el Pleistoceno Superior. Este estudio provee información nueva con respecto a la genética de poblaciones de la caballa en el Pacífico Sudeste.

  5. Physical properties of root cementum: Part 18. The extent of root resorption after the application of light and heavy controlled rotational orthodontic forces for 4 weeks: a microcomputed tomography study.

    Science.gov (United States)

    Wu, Andy T J; Turk, Tamer; Colak, Canan; Elekdağ-Turk, Selma; Jones, Allan S; Petocz, Peter; Darendeliler, M Ali

    2011-05-01

    The aim of this prospective randomized clinical trial was to quantitatively measure and compare the locations, dimensions, and volume of root resorption craters in human premolars after the application of controlled light and heavy rotational orthodontic forces over a 28-day (4-week) period. Fifteen patients requiring bilateral extraction of maxillary first premolars as part of their orthodontic treatment were recruited for this study. Each patient received a heavy (225 g) rotational force on 1 premolar and a light (25 g) rotational force on the contralateral premolar. Orthodontic rotational forces were applied over 28 days with buccal and palatal cantilever springs; 0.016-inch beta-titanium molybdenum alloys were used to apply the light force and 0.018-inch stainless steel was used for the heavy force. After the 28-day experimental period, the upper first premolars were extracted under stringent protocols to prevent root surface damage. The samples were then scanned using a microcomputed tomography (micro-CT) scan x-ray system (SkyScan 1072, Skyscan, Aartselaar, Belgium), and analyzed using convex hull algorithm (CHULL2D; University of Sydney, Sydney, Australia) software to obtain direct volumetric measurements. The mean volume of resorption craters was 0.42 in the light force group and 0.51 in the heavy force group (P = 0.013). When separated at the root level, the difference in volume of root resorption craters between the 2 groups was significantly different only at the midlevel (P = 0.001). Root resorption craters were consistently detected at the boundaries between the buccal and distal surfaces and the mesial and lingual surfaces. The result supports our hypothesis that positive areas develop significantly more root resorption craters at all 3 levels, as compared with minimal areas (paired t test root resorption than light rotational forces and compression areas (buccal-distal and lingual-mesial surfaces in this study) showed significantly higher root

  6. Counter of radiation in body parts

    International Nuclear Information System (INIS)

    Pollard, D.E.

    1983-01-01

    A new radiation counter for the determination of radiocontaminated body parts has been designed. Composed of several movable detectors, shielded from background radiation and focused on different parts of the human body by narrow apertures in the lead enclosure, the invention provides a quick tool for quantitative and qualitative part-by-part analysis of the body with respect to radiocontamination. The counter can be handled easily by the tested person himself and consequently, it is suitable for mass controls etc. (G.J.P.)

  7. Biostatistics primer: part I.

    Science.gov (United States)

    Overholser, Brian R; Sowinski, Kevin M

    2007-12-01

    Biostatistics is the application of statistics to biologic data. The field of statistics can be broken down into 2 fundamental parts: descriptive and inferential. Descriptive statistics are commonly used to categorize, display, and summarize data. Inferential statistics can be used to make predictions based on a sample obtained from a population or some large body of information. It is these inferences that are used to test specific research hypotheses. This 2-part review will outline important features of descriptive and inferential statistics as they apply to commonly conducted research studies in the biomedical literature. Part 1 in this issue will discuss fundamental topics of statistics and data analysis. Additionally, some of the most commonly used statistical tests found in the biomedical literature will be reviewed in Part 2 in the February 2008 issue.

  8. Workshop 96. Part III

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    Part III of the proceedings contain 155 contributions in various fields of science and technology including nuclear engineering, environmental science, and biomedical engineering. Out of these, 10 were selected to be inputted in INIS. (P.A.).

  9. Parts lubas uut muusikakooli

    Index Scriptorium Estoniae

    2005-01-01

    Peaminister Juhan Parts vastas Tallinna Muusikakeskkooli õpilase Judith Partsi kirjale Tallinna Muusikakeskkooli olukorrast lubadusega hoida silma peal Tallinna Muusikakeskkoolile, Tallinna Balletikoolile ja Georg Otsa nim. Muusikakoolile ühise hoone võimaldamisest kokkuehituseks Eesti Muusikaakadeemiaga

  10. Male hypogonadism (Part 1)

    OpenAIRE

    Ye.V. Luchytskyy; V.Yе. Luchytskyy; M.D. Tronko

    2017-01-01

    The first part of the review presents the current data on the prevalence of male hypogonadism, methods of diagnosing different forms of hypogonadism, describes the clinical manifestations of the most common forms of this disease.

  11. Male hypogonadism (Part 1

    Directory of Open Access Journals (Sweden)

    Ye.V. Luchytskyy

    2017-05-01

    Full Text Available The first part of the review presents the current data on the prevalence of male hypogonadism, methods of diagnosing different forms of hypogonadism, describes the clinical manifestations of the most common forms of this disease.

  12. Workshop 96. Part III

    International Nuclear Information System (INIS)

    1995-12-01

    Part III of the proceedings contain 155 contributions in various fields of science and technology including nuclear engineering, environmental science, and biomedical engineering. Out of these, 10 were selected to be inputted in INIS. (P.A.)

  13. Optimal control

    CERN Document Server

    Aschepkov, Leonid T; Kim, Taekyun; Agarwal, Ravi P

    2016-01-01

    This book is based on lectures from a one-year course at the Far Eastern Federal University (Vladivostok, Russia) as well as on workshops on optimal control offered to students at various mathematical departments at the university level. The main themes of the theory of linear and nonlinear systems are considered, including the basic problem of establishing the necessary and sufficient conditions of optimal processes. In the first part of the course, the theory of linear control systems is constructed on the basis of the separation theorem and the concept of a reachability set. The authors prove the closure of a reachability set in the class of piecewise continuous controls, and the problems of controllability, observability, identification, performance and terminal control are also considered. The second part of the course is devoted to nonlinear control systems. Using the method of variations and the Lagrange multipliers rule of nonlinear problems, the authors prove the Pontryagin maximum principle for prob...

  14. NF EN ISO 11137-1, July 2006. Sterilization of health care products - Irradiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices; NF EN ISO 11137-1, Juillet 2006. Sterilisation des produits de sante - Irradiation - Partie 1: exigences relatives a la mise au point, a la validation et au controle de routine d'un procede de sterilisation pour les dispositifs medicaux

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    This part of the ISO 11137 standard specifies requirements for the development, validation and routine control of a radiation sterilization process for medical devices. Although the scope of this part of the ISO 11137 standard is limited to medical devices, it specifies requirements and provides guidance that may be applicable to other products and equipment. This part of the international standard covers radiation processes employing irradiators using the radionuclide {sup 60}Co or {sup 137}Cs, a beam from an electron generator or a beam from an X-ray generator. This part of the international standard does not: - specify requirements for development, validation and routine control of a process for inactivating the causative agents of spongiform encephalopathies such as scrapie, bovine spongiform encephalopathy and Creutzfeldt-Jakob disease; - detail specified requirements for designating a medical device as sterile; - specify a quality management system for the control of all stages of production of medical devices; - specify requirements for occupational safety associated with the design and operation of irradiation facilities; - specify requirements for the sterilization of used or reprocessed devices.

  15. Development of test methods for quality control of LLW and MLW in cement or polymers (Parts 1 and 2). Task 3. Characterization of radioactive waste forms. A series of final reports (1985-1989) no. 39

    International Nuclear Information System (INIS)

    Angelis, G. de; Marchetti, A.; Balzamo, S.

    1992-01-01

    This report is divided into two parts. In the first part, the qualification of samples arising from the cementation of low (LLW) and intermediate level ( MLW) radioactive wastes is studied. In particular, bead ion exchange resins, filter sludges, BWR evaporator concentrates and decontamination solutions have been taken into account. The properties of the final waste forms have been compared with the ones of laboratory scale samples. The qualification of the solidified wastes was performed according to the requirements of the Italian Regulatory Body. Particular attention is devoted to mechanical and thermal properties, biodegradability and behaviour versus water. In the second part, the influence of different parameters on the leaching of Cesium from cemented BWR evaporator concentrates (sulfates) is tested. In particular the influence of the variation of temperature, initial concentration of the tracer, renewal and chemical composition of the leachant, size of the sample, has been tested. 20 refs., 68 figs., 21 tabs

  16. 42 CFR 456.1 - Basis and purpose of part.

    Science.gov (United States)

    2010-10-01

    ... admission review) 1902(a)(30)1903(g)(1)(C) 1903(i)(4) Subpart D—Utilization Control: Mental Hospitals... (CONTINUED) MEDICAL ASSISTANCE PROGRAMS UTILIZATION CONTROL General Provisions § 456.1 Basis and purpose of part. (a) This part prescribes requirements concerning control of the utilization of Medicaid services...

  17. Adaptive Extremum Control and Wind Turbine Control

    DEFF Research Database (Denmark)

    Ma, Xin

    1997-01-01

    This thesis is divided into two parts, i.e., adaptive extremum control and modelling and control of a wind turbine. The rst part of the thesis deals with the design of adaptive extremum controllers for some processes which have the behaviour that process should have as high e ciency as possible...... in parameters, and thus directly lends itself to parameter estimation and adaptive control. The extremum control law is derived based on static optimization of a performance function. For a process with nonlinearity at output the intermediate signal between the linear part and nonlinear part plays an important....... Firstly, it is assumed that the nonlinear processes can be divided into a dynamic linear part and static nonlinear part. Consequently the processes with input nonlinearity and output nonlinearity are treated separately. With the nonlinearity at the input it is easy to set up a model which is linear...

  18. Plutonium microstructures. Part 1

    International Nuclear Information System (INIS)

    Cramer, E.M.; Bergin, J.B.

    1981-09-01

    This report is the first of three parts in which Los Alamos and Lawrence Livermore National Laboratory metallographers exhibit a consolidated set of illustrations of inclusions that are seen in plutonium metal as a consequence of inherent and tramp impurities, alloy additions, and thermal or mechanical treatments. This part includes illustrations of nonmetallic and intermetallic inclusions characteristic of major impurity elements as an aid to identifying unknowns. It also describes historical aspects of the increased purity of laboratory plutonium samples, and it gives the composition of the etchant solutions and describes the etching procedure used in the preparation of each illustrated sample. 25 figures

  19. PHP The Good Parts

    CERN Document Server

    MacIntyre, Peter

    2010-01-01

    Get past all the hype about PHP and dig into the real power of this language. This book explores the most useful features of PHP and how they can speed up the web development process, and explains why the most commonly used PHP elements are often misused or misapplied. You'll learn which parts add strength to object-oriented programming, and how to use certain features to integrate your application with databases. Written by a longtime member of the PHP community, PHP: The Good Parts is ideal for new PHP programmers, as well as web developers switching from other languages. Become familiar w

  20. What is WHMIS? Part One

    Energy Technology Data Exchange (ETDEWEB)

    Matthew, M. A.

    2003-07-01

    Essential features of the Workplace Hazardous Materials Information System (WHMIS) are outlined. WHMIS was introduced by the federal government in 1988, followed in quick succession by specific regulations by the provinces and territories. The WHMIS regulations set out what an employer must do to comply to ensure that controlled products are used, handled, and/or disposed of in the workplace are labelled, that employees are fully trained on the safe use, handling, storage and disposal of all controlled products, and that a material safety data sheet (MSDS) that describes each product is available on site for employees. The controlled products regulation (CPR) which is separate from the WHMIS regulations sets the specific requirements for product labelling for suppliers and importers. Controlled products are categorized in four classes and various subclasses, such as flammable/combustible materials, oxidizing materials, materials of immediate and serious toxic effects, corrosive materials, etc. Part Two of this article will explain supplier versus workplace labels, the content of the material data sheets and will provide details about employee training methods.

  1. Aging Mechanisms and Control. Symposium Part A - Developments in Computational Aero- and Hydro-Acoustics. Symposium Part B - Monitoring and Management of Gas Turbine Fleets for Extended Life and Reduced Costs (Les mecanismes vieillissants et le controle) (Symposium Partie A - Developpements dans le domaine de l’aeroacoustique et I’hydroacoustique numeriques) (Symposium Partie B - Le suivi et la gestion des turbomoteurs en vue du prolongement de l

    Science.gov (United States)

    2003-02-01

    Environmental Medicine 1999; 70 (3, Suppl): A40-5. 40. Castro AP, Aguas AP, Grande NR, Monteiro E, Castelo Branco NAA. Increase in CD8+ and CD4+ T lymphocytes...residual value of the old parts, ie whether they could be reused or not. • The cost of the affected components. • The subsequent reduction in maintenance... reuse potential for developed system parts. A number of systems with similar tasks as the EHM is needed for development, production and repair of the

  2. Workshop 96. Part II

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    Part II of the seminar proceedings contains contributions in various areas of science and technology, among them materials science in mechanical engineering, materials science in electrical, chemical and civil engineering, and electronics, measuring and communication engineering. In those areas, 6 contributions have been selected for INIS. (P.A.).

  3. Basic Electricity. Part 3.

    Science.gov (United States)

    Kilmer, Donald C.

    Third (part 3) in a set of four guides designed for the student interested in a vocation in electrical work, this guide includes four units: Unit VI--Ohm's Law, covering six lessons (voltage, current-flow and resistance, the Ohm's Law formula, formula for finding voltage, formula for finding resistance); Unit VII--Voltages, covering five lessons…

  4. Workshop 96. Part II

    International Nuclear Information System (INIS)

    1995-12-01

    Part II of the seminar proceedings contains contributions in various areas of science and technology, among them materials science in mechanical engineering, materials science in electrical, chemical and civil engineering, and electronics, measuring and communication engineering. In those areas, 6 contributions have been selected for INIS. (P.A.)

  5. Workshop 95. Part I

    International Nuclear Information System (INIS)

    1995-12-01

    The proceedings of the seminar contain more than 420 contributions divided into 21 areas of interest. In Part I, 144 contributions are presented from the following fields: mathematics, physics, chemistry, engineering informatics and cybernetics, computer art, and fluid mechanics. For input in INIS, 15 contributions were selected from the physics section and 1 from the chemistry section. (J.B.)

  6. Workshop 95. Part I

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    The proceedings of the seminar contain more than 420 contributions divided into 21 areas of interest. In Part I, 144 contributions are presented from the following fields: mathematics, physics, chemistry, engineering informatics and cybernetics, computer art, and fluid mechanics. For input in INIS, 15 contributions were selected from the physics section and 1 from the chemistry section. (J.B.).

  7. Workshop 93. Part A

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    The aim of the seminar was to present and discuss the latest results obtained in research at the Czech Technical University and collaborating institutions. Part A of the Proceedings contains 99 contributions from the following fields: physical electronics and optics, mathematics, informatics and cybernetics, and materials engineering. Two contributions were selected for INIS. (J.B.).

  8. MIRD methodology. Part 1

    International Nuclear Information System (INIS)

    Rojo, Ana M.

    2004-01-01

    This lecture develops the MIRD (Medical Internal Radiation Dose) methodology for the evaluation of the internal dose due to the administration of radiopharmaceuticals. In this first part, the basic concepts and the main equations are presented. The ICRP Dosimetric System is also explained. (author)

  9. MIRD methodology. Part 2

    International Nuclear Information System (INIS)

    Gomez Parada, Ines

    2004-01-01

    This paper develops the MIRD (Medical Internal Radiation Dose) methodology for the evaluation of the internal dose due to the administration of radiopharmaceuticals. In this second part, different methods for the calculation of the accumulated activity are presented, together with the effective half life definition. Different forms of Retention Activity curves are also shown. (author)

  10. Machine Parts as Metaphor.

    Science.gov (United States)

    Porter, Gerald

    The connection between Language for Specific Purposes (LSP) and literature is discussed with examples of technical vocabulary drawn from a variety of writers, with particular attention to a sketch by the British dramatist Harold Pinter, "Trouble in the Works," which makes extensive use of the terminology of machine parts. It is noted…

  11. Workshop 93. Part A

    International Nuclear Information System (INIS)

    1993-01-01

    The aim of the seminar was to present and discuss the latest results obtained in research at the Czech Technical University and collaborating institutions. Part A of the Proceedings contains 99 contributions from the following fields: physical electronics and optics, mathematics, informatics and cybernetics, and materials engineering. Two contributions were selected for INIS. (J.B.)

  12. Fault Tolerant Feedback Control

    DEFF Research Database (Denmark)

    Stoustrup, Jakob; Niemann, H.

    2001-01-01

    An architecture for fault tolerant feedback controllers based on the Youla parameterization is suggested. It is shown that the Youla parameterization will give a residual vector directly in connection with the fault diagnosis part of the fault tolerant feedback controller. It turns out...... that there is a separation be-tween the feedback controller and the fault tolerant part. The closed loop feedback properties are handled by the nominal feedback controller and the fault tolerant part is handled by the design of the Youla parameter. The design of the fault tolerant part will not affect the design...... of the nominal feedback con-troller....

  13. Workshop 95. Part III

    International Nuclear Information System (INIS)

    1995-01-01

    Out of 140 short communications presented in the proceedings, 13 have been inputted into INIS. The topics covered include lifetime control in semiconductor devices by ion irradiation, single crystal scintillation detectors, environmental monitoring, diffusion and sorption of radionuclides in soils, accelerator driven reactors, radioactive waste disposal, digital reactor control systems and research reactors. (Z.S.)

  14. Workshop 95. Part III

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    Out of 140 short communications presented in the proceedings, 13 have been inputted into INIS. The topics covered include lifetime control in semiconductor devices by ion irradiation, single crystal scintillation detectors, environmental monitoring, diffusion and sorption of radionuclides in soils, accelerator driven reactors, radioactive waste disposal, digital reactor control systems and research reactors. (Z.S.).

  15. Roland Weber first part

    DEFF Research Database (Denmark)

    2016-01-01

    The Sooty bloch complex - species identity, infection biology and control options. Rubbery rot and Black summer rot - two new diseases of apple......The Sooty bloch complex - species identity, infection biology and control options. Rubbery rot and Black summer rot - two new diseases of apple...

  16. Holistic processing from learned attention to parts.

    Science.gov (United States)

    Chua, Kao-Wei; Richler, Jennifer J; Gauthier, Isabel

    2015-08-01

    Attention helps us focus on what is most relevant to our goals, and prior work has shown that aspects of attention can be learned. Learned inattention to parts can abolish holistic processing of faces, but it is unknown whether learned attention to parts is sufficient to cause a change from part-based to holistic processing with objects. We trained subjects to individuate nonface objects (Greebles) from 2 categories: Ploks and Glips. Diagnostic information was in complementary halves for the 2 categories. Holistic processing was then tested with Plok-Glip composites that combined the kind of part that was diagnostic or nondiagnostic during training. Exposure to Greeble parts resulted in general failures of selective attention for nondiagnostic composites, but face-like holistic processing was only observed for diagnostic composites. These results demonstrated a novel link between learned attentional control and the acquisition of holistic processing. (c) 2015 APA, all rights reserved).

  17. Concern for older parts

    International Nuclear Information System (INIS)

    Titus, E.; Spink, T.; Cookson, B.; Tenera, L.P.

    1992-01-01

    For the last half decade, regulatory expectations of the procurement process for nuclear commercial-grade safety-related materials have increase. The changes have been driven by concern for fraudulent or misrepresented parts and the loss of original equipment manufacturers. The industry responded to these concerns by developing improved procurement programs that changed how parts were specified and received and provided for verification of attributes that were critical to the successful performance of safety functions(s). Like its counterparts, Duquesne Light Company (DLCo), Beaver Valley power station began applying these enhanced requirements to procurements initiated after January 1, 1990, in response to the Nuclear Management and Resources Council initiative on dedication. Procurements prior to this data were not subject to the new requirements

  18. Workshop 93. Part B

    International Nuclear Information System (INIS)

    1993-01-01

    The aim of the seminar was to present and discuss the latest results obtained in research at the Czech Technical University and collaborating institutions. Part B of the Proceedings contains 109 contributions from the following fields: physics; medical engineering; fluid mechanics, environmental engineering, and structural mechanics. Fourteen contributions dealing with nuclear physics, plasma physics, quantum physics, nuclear chemistry, and computational physics were selected for INIS. (J.B.)

  19. Electricity Bill [Part 1

    International Nuclear Information System (INIS)

    Parkinson, C.; Hogg, N.; Salmond, A.

    1988-01-01

    The paper presents the first part of the Parliamentary debate on the second reading of the Electricity Bill, House of Commons, London 1988. The Bill sets out the government's proposals for the restructuring and privatisation of the electricity supply industry throughout Great Britain. Customers and suppliers, choice for the consumer, competition promotion, security of supply, nuclear power stations, and cost, are all discussed. (U.K.)

  20. Workshop 93. Part B

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    The aim of the seminar was to present and discuss the latest results obtained in research at the Czech Technical University and collaborating institutions. Part B of the Proceedings contains 109 contributions from the following fields: physics; medical engineering; fluid mechanics, environmental engineering, and structural mechanics. Fourteen contributions dealing with nuclear physics, plasma physics, quantum physics, nuclear chemistry, and computational physics were selected for INIS. (J.B.).

  1. Workshop 96. Part I

    International Nuclear Information System (INIS)

    1995-12-01

    The proceedings of the seminar contain nearly 500 contributions divided into 22 fields of science and technology. In Part I, 167 contributions are presented in the following areas: mathematics, physics, chemistry, engineering informatics and cybernetics, computers, and fluid mechanics. For input in INIS, 19 contributions were selected from the Physics section, 2 from the Mathematics section, and 4 from the Chemistry section. (P.A.)

  2. Workshop 96. Part I

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    The proceedings of the seminar contain nearly 500 contributions divided into 22 fields of science and technology. In Part I, 167 contributions are presented in the following areas: mathematics, physics, chemistry, engineering informatics and cybernetics, computers, and fluid mechanics. For input in INIS, 19 contributions were selected from the Physics section, 2 from the Mathematics section, and 4 from the Chemistry section. (P.A.).

  3. Development of energy-efficient comfortable ventilation systems with air quality guided volume flow control and continuous monitoring of the window opening status. Part 1. Use of the LuQaS triple sensor for air quality guided volume flow control of mechanical ventilation systems in domestic buildings. Research project; Entwicklung energieeffizienter Komfortlueftungsanlagen mit luftqualitaetsgefuehrter Volumenstromregelung und kontinuierlicher Erfassung des Fensteroeffnungszustandes. Teilbericht 1. Einsatz des LuQaS-Triple-Sensors zur luftqualitaetsgefuehrten Volumenstromregelung von mechanischen Lueftungsanlagen in Wohngebaeuden. Forschungsprojekt

    Energy Technology Data Exchange (ETDEWEB)

    Grossklos, Marc; Ebel, Witta; Knissel, Jens

    2011-05-15

    The report presents the preparatory work on the research project of the above title. The first chapter presents a status report on air quality monitoring inside rooms and evaluates the projects so far in which the LuQaS air quality sensor was used. The second chapter is a documentation of preliminary measurements using the LuQaS sensor in two passive residential buildings and several individual measurements for sensor calibration. It was found that in apartments with mechanical ventilation, the sensor reflects the user activities; further, the measured values indicate signal changes also in the off-air of the building, so that control via central sensors in the ventilation and off-air systems appears feasible. The third chapter discusses control strategies for air quality control. Apart from a discussion of control unit types, operating regimes, methods to determine rated values, and additional control functions, the effects of threshold value control with different threshold limit values and volume flow changes on the air quality of a model building was simulated. The results prove the expectation that the air quality inside a building will be influenced positively by air quality control. Theoretical investigations of the DrD method will be presented in another part-report of the project.

  4. The outer vactank, an object of 7.6m diameter and 13m length is built up of three cylindrical parts. The central part that is integral part of the central barrel and the the extension on either side each one 4.5m long. These extensions house the shoulders that will support and prestress the CMS Coil. To weld the extensions onto the central part a full penetration weld of 24m length and 45 mm thickness has to be done by hand from inside and outside the vacuum tank and its deformation is controled permanently.

    CERN Multimedia

    Hubert Gerwig

    2001-01-01

    The outer vacuum tank will hold the coil suspension system and transmits the weight of the inner detectors to the central barrel. Its thickness is staggered. In the central part its thickness is 60 mm and then goes down to 30 mm at the extremity.

  5. Fuel cells (part 2)

    International Nuclear Information System (INIS)

    Campanari, S.; Macchi, E.

    1999-01-01

    The article, following and completing the issues dealt with in part 1 (CH4 Energia Metano, 1/99, p. 7), describe the operating characteristic and construction features of molten carbonate and solid oxide fuel cells (MCFC and SOFC). For the latter type, construction cost are evaluated by various authors and research institutes. The article ends by presenting some tables showing the classification and the main characteristics of various fuel cells, and well as the effect of some gases on the behaviour of some of them [it

  6. Java The Good Parts

    CERN Document Server

    Waldo, Jim

    2010-01-01

    What if you could condense Java down to its very best features and build better applications with that simpler version? In this book, veteran Sun Labs engineer Jim Waldo reveals which parts of Java are most useful, and why those features make Java among the best programming languages available. Every language eventually builds up crud, Java included. The core language has become increasingly large and complex, and the libraries associated with it have grown even more. Learn how to take advantage of Java's best features by working with an example application throughout the book. You may not l

  7. R806 (part 1)

    CERN Multimedia

    CERN PhotoLab

    1976-01-01

    R806 was designed by the BNL-CERN-Syracuse-Yale Collaboration (Bill Willis spokesman) to study large transverse momentum phenomena, and installed in intersection 8 of the ISR. The main detectors were Lithium foil transition radiation detectors to identify electrons and liquid argon calorimeters to measure the energy of the electrons and photons (among the first such calorimeters to be used in an experiment). In part 1 there were two modules, top and bottom of the horizontal beam pipe; the black vertical pipe contains the cryogenics (LN2 and Lar) and is connected to the two modules with the horizontal piping.

  8. Control of Chaos: New Perspectives in Experimental and Theoretical Science. International Journal of Bifurcation and Chaos in Applied Sciences and Engineering. Theme Issue. Part 1. Volume 8, Number 8, August 1998.

    Science.gov (United States)

    1998-08-01

    de Matemdticas, Universidad de Murcia, Murcia, Spain RICARDO CHACON Departamento de Electr6nica e, Ingenieria Electromecdnica, Escuela, de... Ingenierias Industriales, Universidad de Extremadura, 06071, Badajoz, Spain MIGUEL ANGEL LOPEZ Departamento de Matemdticas, Aplicada, Escuela Universitaria de...World Scientific Publishing Company FUZZY CONTROL OF CHAOS OSCAR CALVO* CICpBA, L.E.L C.1, Departamento de Electrotecnia, Facultad de Ingenieria

  9. State of work on Main Task 3.1.3 of Complex Programme of Scientific and Technical Progress and precondition for ensuring Czechoslovak automatic control system instrumentation and electrical parts for new-generation power plant project

    International Nuclear Information System (INIS)

    Hrebik, V.

    1990-01-01

    A brief account is given of the state of negotiations with the Soviet partner concerning the preparation, creation and implementation of prospective automated technological equipment control systems at WWER type nuclear power plants. The organization is very clumsy in some fields and their conceptions are not clear. (Z.S.)

  10. Control of Chaos: New Perspectives in Experimental and Theoretical Science. International Journal of Bifurcation and Chaos in Applied Sciences and Engineering. Theme Issue. Part 2, Volume 8, Number 9, September 1998.

    Science.gov (United States)

    1998-09-01

    GARBO*, R. BALOCCHIt and S. CHILLEMI* *Istituto di Biofisica CNR, Via S. Lorenzo 26, 56127 Pisa, Italy tIstituto di Fisiologia Clinica CNR, Via...Publishing Company DIFFUSION PARAMETER CONTROL OF SPATIOTEMPORAL CHAOS RAUL MONTAGNE* Instituto de Fisica, Facultad de Ciencias & Facultad de Ingenieria

  11. Sterilization of Carpocapsa pomonella and evaluation of the sterile male technique. Part of a coordinated programme on the use of the sterile male technique in control of lepidopterous insects attacking fruit and forest trees

    International Nuclear Information System (INIS)

    Landa, V.

    1975-01-01

    Juvenoids affected all developmental stages studied. Some compounds appear more promising for orchard application. None of the tested compounds proved superior to conventional insecticides. Infestation of fruit could not be prevented in cage experiments carried out in orchards but was reduced compared with controls. The use of juvenile hormone analogues still appears promising provided more effective and selective compounds can be developed

  12. Control mental

    OpenAIRE

    Bueno i Torrens, David, 1965-

    2013-01-01

    La revista especialitzada NeuroReport ha publicat un article que m'ha aportat nous elements de reflexió sobre els mecanismes neurals de control mental que, de forma innata, realitzem les persones com a part de la nostra vida social.

  13. 21 CFR 1405.100 - What does this part do?

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 9 2010-04-01 2010-04-01 false What does this part do? 1405.100 Section 1405.100 Food and Drugs OFFICE OF NATIONAL DRUG CONTROL POLICY GOVERNMENTWIDE REQUIREMENTS FOR DRUG-FREE WORKPLACE (FINANCIAL ASSISTANCE) Purpose and Coverage § 1405.100 What does this part do? This part carries...

  14. Alveolar Soft Part Sarcoma.

    Science.gov (United States)

    Jaber, Omar I; Kirby, Patricia A

    2015-11-01

    Alveolar soft part sarcoma is a rare neoplasm usually arising in the soft tissues of the lower limbs in adults and in the head and neck region in children. It presents primarily as a slowly growing mass or as metastatic disease. It is characterized by a specific chromosomal alteration, der(17)t(X:17)(p11:q25), resulting in fusion of the transcription factor E3 (TFE3) with alveolar soft part sarcoma critical region 1 (ASPSCR1) at 17q25. This translocation is diagnostically useful because the tumor nuclei are positive for TFE3 by immunohistochemistry. Real-time polymerase chain reaction to detect the ASPSCR1-TFE3 fusion transcript on paraffin-embedded tissue blocks has been shown to be more sensitive and specific than detection of TFE3 by immunohistochemical stain. Cathepsin K is a relatively recent immunohistochemical stain that can aid in the diagnosis. The recent discovery of the role of the ASPSCR1-TFE3 fusion protein in the MET proto-oncogene signaling pathway promoting angiogenesis and cell proliferation offers a promising targeted molecular therapy.

  15. Mapping sequences by parts

    Directory of Open Access Journals (Sweden)

    Guziolowski Carito

    2007-09-01

    Full Text Available Abstract Background: We present the N-map method, a pairwise and asymmetrical approach which allows us to compare sequences by taking into account evolutionary events that produce shuffled, reversed or repeated elements. Basically, the optimal N-map of a sequence s over a sequence t is the best way of partitioning the first sequence into N parts and placing them, possibly complementary reversed, over the second sequence in order to maximize the sum of their gapless alignment scores. Results: We introduce an algorithm computing an optimal N-map with time complexity O (|s| × |t| × N using O (|s| × |t| × N memory space. Among all the numbers of parts taken in a reasonable range, we select the value N for which the optimal N-map has the most significant score. To evaluate this significance, we study the empirical distributions of the scores of optimal N-maps and show that they can be approximated by normal distributions with a reasonable accuracy. We test the functionality of the approach over random sequences on which we apply artificial evolutionary events. Practical Application: The method is illustrated with four case studies of pairs of sequences involving non-standard evolutionary events.

  16. Take part in the Poster Forum

    CERN Multimedia

    2008-01-01

    The CERN Control Week will run from 17 to 23 May 2008. For the first time, the IT-CO group will be organising a "poster forum" on the theme of process control, which will be held in the main hall of Building 500 in Meyrin, near Restaurant No. 1 (see Bulletin No. 16/2008). If you wish to take part, there is still time to send your posters to Mathias Dutour or Stefan Lueders.

  17. Parts Quality Management: Direct Part Marking of Data Matrix Symbol for Mission Assurance

    Science.gov (United States)

    Moss, Chantrice; Chakrabarti, Suman; Scott, David W.

    2013-01-01

    A United States Government Accountability Office (GAO) review of twelve NASA programs found widespread parts quality problems contributing to significant cost overruns, schedule delays, and reduced system reliability. Direct part marking with Data Matrix symbols could significantly improve the quality of inventory control and parts lifecycle management. This paper examines the feasibility of using direct part marking technologies for use in future NASA programs. A structural analysis is based on marked material type, operational environment (e.g., ground, suborbital, Low Earth Orbit), durability of marks, ease of operation, reliability, and affordability. A cost-benefits analysis considers marking technology (label printing, data plates, and direct part marking) and marking types (two-dimensional machine-readable, human-readable). Previous NASA parts marking efforts and historical cost data are accounted for, including inhouse vs. outsourced marking. Some marking methods are still under development. While this paper focuses on NASA programs, results may be applicable to a variety of industrial environments.

  18. Workshop 93. Part C

    International Nuclear Information System (INIS)

    1995-01-01

    Out of 94 short communications contained in the proceedings, 11 items were inputted to the INIS system. The topics covered include underground containment, in situ gamma scintillation spectroscopy, radionuclide methods in measuring fuel flow to boilers, microdosimetric studies of photon fields, training reactors, digital control of research reactors, nuclear reactor educational programmes, PIXE analysis, and transient analysis of steam turbines. (Z.S.)

  19. Workshop 93. Part C

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    Out of 94 short communications contained in the proceedings, 11 items were inputted to the INIS system. The topics covered include underground containment, in situ gamma scintillation spectroscopy, radionuclide methods in measuring fuel flow to boilers, microdosimetric studies of photon fields, training reactors, digital control of research reactors, nuclear reactor educational programmes, PIXE analysis, and transient analysis of steam turbines. (Z.S.).

  20. AISI/DOE Advanced Process Control Program Vol. 3 of 6: MICROSTRUCTURAL ENGINEERING IN HOT-STRIP MILLS Part 2 of 2: Constitutive Behavior Modeling of Steels Under Hot-Rolling Conditions; FINAL

    International Nuclear Information System (INIS)

    Yi-Wen Cheng; Patrick Purtscher

    1999-01-01

    This report describes the development of models for predicting (1) constitutive behaviors and (2) mechanical properties of hot-rolled steels as functions of chemical composition, microstructural features, and processing variables. The study includes the following eight steels: A36, DQSK, HSLA-V, HSLA-Nb, HSLA-50/Ti-Nb, and two interstitial-free (IF) grades. These developed models have been integrated into the Hot-Strip Mill Model (HSMM), which simulates the hot strip rolling mills and predicts the mechanical properties of hot-rolled products. The HSMM model has been developed by the University of British Columbia-Canada as a part of project on the microstructural engineering in hot-strip mills

  1. Implementación de una Carta de Control para Corridas Cortas en la Industria de AutopartesImplementation of a short Run chart in the Auto Parts Industry

    Directory of Open Access Journals (Sweden)

    Jesús Fidernan Barrera Cobos

    2016-01-01

    Full Text Available Contexto: La industria nacional tiene que adaptarse a las necesidades del mercado, lo que implica en algunos casos el cambio en la realización de sus procesos productivos. Uno de estos cambios tiene que ver con el tamaño de lote de producción, el cual ha pasado de un tamaño de miles de unidades a uno quizas, de algunos cientos. El seguimiento de estos procesos con métodos estadísticos, como las cartas de control, ha llevado al uso de las denominadas cartas de control para lotes pequeños. Método: En este artículo se presenta la propuesta de implementación de una carta de este tipo en un proceso de fabricación de una empresa del sector automotriz nacional. Inicialmente se plantea el estado actual del proceso, el cual se sigue con una carta de control  - R, usada por la empresa para el seguimiento de la producción; luego se hace mención a algunas de las cartas de control para lotes pequeños, que han sido planteadas por diversos autores. Resultados: Con base en la información del estado actual del proceso se realiza la elección de la carta para lotes pequeños más adecuada. Conclusiones: Dadas las características de no homogeneidad de la varianza, determinada mediante una prueba no paramétrica para las referencias analizadas, se decide que la carta a ser usada es la normalizada. De las tres propuestas de carta presentadas la decisión de cuál usar depende de la varianza del proceso al fabricar las distintas referencias.

  2. Specificity of the Acute Tryptophan and Tyrosine Plus Phenylalanine Depletion and Loading Tests Part II: Normalisation of the Tryptophan and the Tyrosine Plus Phenylalanine to Competing Amino Acid Ratios in a New Control Formulation

    Directory of Open Access Journals (Sweden)

    Abdulla A.-B. Badawy

    2010-06-01

    Full Text Available Current formulations for acute tryptophan (Trp or tyrosine (Tyr plus phenylalanine (Phe depletion and loading cause undesirable decreases in ratios of Trp or Tyr + Phe to competing amino acids (CAA, thus undermining the specificities of these tests. Branched-chain amino acids (BCAA cause these unintended decreases, and lowering their content in a new balanced control formulation in the present study led to normalization of all ratios. Four groups (n = 12 each of adults each received one of four 50 g control formulations, with 0% (traditional, 20%, 30%, or 40% less of the BCAA. The free and total [Trp]/[CAA] and [Phe + Tyr]/[BCAA + Trp] ratios all decreased significantly during the first 5 h following the traditional formulation, but were fully normalized by the formulation containing 40% less of the BCAA. We recommend the latter as a balanced control formulation and propose adjustments in the depletion and loading formulations to enhance their specificities for 5-HT and the catecholamines.

  3. Study on the optimal control of the ground thermal storage system in the greenhouse. Part 4; Onshitsu ni okeru taiyo energy dochu chikunetsu system ni okeru saiteki seigyo ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Zheng, M [Sanko Air Conditioning Co. Ltd., Osaka (Japan); Nakahara, N [Kanagawa University, Yokohama (Japan)

    1996-10-27

    Three types of weight in both energy saving and optimum room temperature environment were changed to obtain the optimal control solution of the ground thermal storage system in a greenhouse. The relation diagram between the optimal solution of a performance function, and the state constraints and control function constraints was created in consideration of the energy term in a control function value area and the room temperature environment. As a result, the whole image of the performance function could be grasped in consideration of the energy term with inequality constraints and the room temperature environmental term in this study. The rate of a weighting factor in the performance function significantly influences the optimal solution. The influence on the optimal solution also changes when the optimal room temperature schedule differs. The influence that three types of rising algorithm exert on the convergence and converging speed was investigated. Superiority or inferiority occurs according to the space properties of a performance function. A zigzag method is most disadvantageous. The constraints can be converged to the optimal solution using an SUMT outer point method irrespective of the initial value. 6 refs., 6 figs., 4 tabs.

  4. LGBTQ Youth Part 1.

    Science.gov (United States)

    Perron, Tracy; Kartoz, Connie; Himelfarb, Chaya

    2017-03-01

    In order to provide holistic care, school nurses must be culturally competent by being sensitive to health disparities experienced by students in at-risk populations. Despite the growing acceptance toward gender and sexual minorities, LGBTQ youth remain an at-risk population in our communities and our schools. School nurses as well as school counselors, social workers, and psychologists can increase their cultural competence in caring for this group of students by increasing their understanding of appropriate terminology and risks associated with this vulnerable group. This article is Part 1 of a two-article series designed to increase school nurses' abilities to advocate and care for LGBTQ youth in school settings. This first article provides information regarding proper terminology and current percentages of youth who identify as LGBTQ and concludes with implications for school nurses, including resources for nurses, school staff, and families.

  5. LGBTQ Part 2.

    Science.gov (United States)

    Perron, Tracy; Kartoz, Connie; Himelfarb, Chaya

    2017-03-01

    In addition to dealing with the normal challenges of being a teenager, many times LGBTQ youth have to deal with harassment, intimidation, and bullying on a daily basis as they disproportionately experience verbal and physical harassment while in school as a result of their sexual orientation and/or gender identity. This violence adversely affects these students' health and well-being as reflected in the depression and suicide rate among LGBTQ youth. As Part 2 of a series in articles on caring for LGBTQ youth in a school setting, this article reviews specific health risks in this group of students. School nurses can help reduce disparities in health for LGBTQ youth by understanding risk for psychological consequences of bullying and advocating for a just and responsive social school culture. Implications for school nurses include educating school staff and families as well as providing prompt and appropriate referrals for necessary psychological care.

  6. Rickets: Part I.

    Science.gov (United States)

    Shore, Richard M; Chesney, Russell W

    2013-01-01

    Rickets is characterized by impaired mineralization and ossification of the growth plates of growing children caused by a variety of disorders, the most frequent of which is nutritional deficiency of vitamin D. Despite ample knowledge of its etiology and the availability of cost-effective methods of preventing it, vitamin D deficiency rickets remains a significant problem in developing and developed countries. This two-part review covers the history, etiology, pathophysiology and clinical and radiographical findings of vitamin D deficiency rickets. Other less frequent causes of rickets and some of the disorders entering into the differential diagnoses of rickets are also considered. Controversial issues surrounding vitamin D deficiency include determination of what constitutes vitamin D sufficiency and the potential relationship between low levels of vitamin D metabolites in many individuals and unexplained fractures in infants.

  7. Job sharing. Part 1.

    Science.gov (United States)

    Anderson, K; Forbes, R

    1989-01-01

    This article is the first of a three part series discussing the impact of nurses job sharing at University Hospital, London, Ontario. This first article explores the advantages and disadvantages of job sharing for staff nurses and their supervising nurse manager, as discussed in the literature. The results of a survey conducted on a unit with a large number of job sharing positions, concur with literature findings. The second article will present the evaluation of a pilot project in which two nurses job share a first line managerial position in the Operating Room. The third article will relate the effects of job sharing on women's perceived general well being. Job sharing in all areas, is regarded as a positive experience by both nurse and administrators.

  8. Part 6: Forest monitoring

    International Nuclear Information System (INIS)

    1997-01-01

    In this part the results of forest monitoring on Hungarian and Slovak territory are presented. The two countries examine the growth and the health conditions of trees in similar ways. The monitoring sites in the Slovak and Hungarian territories, included in the joint monitoring, are shown on figure. The Slovak Party has already evaluated the wood yield data for 1996, the weekly girth growth observations in 1996 were not performed yet. So far on the Hungarian side only the weekly girth growth data are available for the year 1996, the wood yield data for 1996 are being processed. In the evaluation of Hungarian side only the results obtained for the period from 1992 to 1995 were analysed. Moreover, on the Slovak side an evaluation of the health conditions of trees based on aerial was carried out. The Hungarian party did not carried out such a survey, therefore the evaluation is based only on field (on-the-spot) observations

  9. Loose parts monitoring system

    International Nuclear Information System (INIS)

    Wakasa, Kohji; Nishida, Eiichi; Ishii, Kazuo; Yamanaka, Hiroto.

    1987-01-01

    In the loose parts monitoring system (LPMS), installed for integrity monitoring of the nuclear power plants; when there occur foreign metallic objects in the reactor primary system, including a steam generator and the piping, the sounds caused by them moving with the cooling water and thereby getting in contact with various structures are detected. Its purpose is, therefore, to detect any abnormality in the reactor plant system through such abnormal sounds due to loose or fallen supports etc., and so provide this information to the reactor operators. In principle, accelerometers are distributed in such as reactor vessel, steam generator, coolant pumps, etc., so that various sounds are collected and converted into electrical signals, followed by analysis of the data. Described are the LPMS configuration/functions, the course taken in LPMS development, future problems, etc. (Mori, K.)

  10. Role of the ERC motif in the proximal part of the second intracellular loop and the C-terminal domain of the human prostaglandin F2alpha receptor (hFP-R) in G-protein coupling control.

    Science.gov (United States)

    Pathe-Neuschäfer-Rube, Andrea; Neuschäfer-Rube, Frank; Püschel, Gerhard P

    2005-05-15

    The human FP-R (F2alpha prostaglandin receptor) is a Gq-coupled heptahelical ectoreceptor, which is of significant medical interest, since it is a potential target for the treatment of glaucoma and preterm labour. On agonist exposure, it mediates an increase in intracellular inositol phosphate formation. Little is known about the structures that govern the agonist-dependent receptor activation. In other prostanoid receptors, the C-terminal domain has been inferred in the control of agonist-dependent receptor activation. A DRY motif at the beginning of the second intracellular loop is highly conserved throughout the G-protein-coupled receptor family and appears to be crucial for controlling agonist-dependent receptor activation. It is replaced by an ERC motif in the FP-R and no evidence for the relevance of this motif in ligand-dependent activation of prostanoid receptors has been provided so far. The aim of the present study was to elucidate the potential role of the C-terminal domain and the ERC motif in agonist-controlled intracellular signalling in FP-R mutants generated by site-directed mutagenesis. It was found that substitution of the acidic Glu(132) in the ERC motif by a threonine residue led to full constitutive activation, whereas truncation of the receptor's C-terminal domain led to partial constitutive activation of all three intracellular signal pathways that had previously been shown to be activated by the FP-R, i.e. inositol trisphosphate formation, focal adhesion kinase activation and T-cell factor signalling. Inositol trisphosphate formation and focal adhesion kinase phosphorylation were further enhanced by ligand binding in cells expressing the truncation mutant but not the E132T (Glu132-->Thr) mutant. Thus C-terminal truncation appeared to result in a receptor with partial constitutive activation, whereas substitution of Glu132 by threonine apparently resulted in a receptor with full constitutive activity.

  11. Fuel cycle math - part one

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This article is Part One of a two-part article that reviews some of the numbers associated with the nuclear fuel cycle. The contents of Part One include: composition of the element uranium, considering atomic mass and weight-percent of the isotopes; uranium in the ground, including ore grades; mining, with dilution factors and recovery rates; ore sorting, including concentration factors; and uranium recovery. No financial information is presented in either Part One or Part Two

  12. External quality control of Pléiades orthoimagery – Part II: Geometric testing and validation of a Pléiades-1B orthoproduct covering Maussane test site

    OpenAIRE

    GRAZZINI Jacopo; AASTRAND Paer

    2013-01-01

    The goal of the current report is to provide with a final statement on the geometric capabilities of Pléiades sensors through the Quality Control (QC) of Pléiades-1B orthocorrected imagery following the recent validation of Pléiades-1A. Namely, the validation process aims at measuring the influence of different factors on the geometric accuracy of Pléiades-1B orthoimagery. For that purpose, a light benchmarking is implemented as: • a single far-from-nadir image datasetis evaluated using 2 ...

  13. Relationships between molecular structure and kinetic and thermodynamic controls in lipid systems. Part III. Crystallization and phase behavior of 1-palmitoyl-2,3-stearoyl-sn-glycerol (PSS) and tristearoylglycerol (SSS) binary system.

    Science.gov (United States)

    Bouzidi, Laziz; Narine, Suresh S

    2012-01-01

    The phase behavior of 1-palmitoyl-2,3-distearoyl-sn-glycerol (PSS)/tristearoylglycerol (SSS) binary system was investigated in terms of polymorphism, crystallization and melting behavior, microstructure and solid fat content (SFC) using widely different constant cooling rates. Kinetic phase diagrams were experimentally determined from the DSC heating thermograms and analyzed using a thermodynamic model to account for non-ideality of mixing. The kinetic phase diagram presented a typical eutectic behavior with a eutectic point at the 0.5(PSS) mixture with a probable precipitation line from 0.5(PSS) to 1.0(PSS), regardless of the rate at which the sample was cooled. The eutectic temperature decreased only slightly with increasing cooling rate. PSS has a strong effect on the physical properties of the PSS-SSS mixtures. In fact, the overall phase behavior of the PSS-SSS binary system was determined, for a very large part, by the asymmetrical TAG. Moreover, PSS is a key driver of the high stability observed in crystal growth, polymorphism and phase development. Levels as low as 10% PSS, when cooled slowly, and 30% when cooled rapidly, were found to be sufficient to suppress the effect of thermal processing. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

  14. Development of energy-efficient comfort ventilation plants with air quality controlled volume flow rate and continuous detection of the status of the windows aperture. Part 3. Final report with documentation of the field test; Entwicklung energieeffizienter Komfortlueftungsanlagen mit luftqualitaetsgefuehrter Volumenstromregelung und kontinuierlicher Erfassung des Fensteroeffnungszustandes. Teilbericht 3. Endbericht mit Dokumentation des Feldtests

    Energy Technology Data Exchange (ETDEWEB)

    Grossklos, Marc; Hacke, Ulrike [Institut Wohnen und Umwelt GmbH, Darmstadt (Germany)

    2012-10-25

    Residential ventilation systems with a heat recovery contribute to the improvement of the air quality and to the reduction of heat losses caused by ventilation. An additional opening of the windows in residential buildings results in a clearly increasing consumption of thermal heat because the thermal heat of the out coming air cannot be utilized furthermore. Continuous information on the energetic effects of the opening of windows is helpful. Under this aspect, the authors of the contribution under consideration report on the development of energy efficient comfort ventilation systems with an air quality controlled volume flow rate and continuous detection of the status of the windows aperture. The contribution under consideration is the third part of a project concerning to this theme. This part encompasses a field test with four single-family houses in which the air quality control as well as the detection of the status of the windows aperture is tested and optimized for a long period. This contribution also contains the results of the second part of the project. The second project investigate the technical implementation of a air quality regulation at prototypes and test facilities.

  15. Production of extended plasma channels in atmospheric air by amplitude-modulated UV radiation of GARPUN-MTW Ti : sapphire—KrF laser. Part 2. Accumulation of plasma electrons and electric discharge control

    Science.gov (United States)

    Zvorykin, V. D.; Ionin, Andrei A.; Levchenko, A. O.; Mesyats, Gennadii A.; Seleznev, L. V.; Sinitsyn, D. V.; Smetanin, Igor V.; Sunchugasheva, E. S.; Ustinovskii, N. N.; Shutov, A. V.

    2013-04-01

    The problem of the production of extended (~1 m) plasma channels is studied in atmospheric air by amplitude-modulated laser pulses of UV radiation, which are a superposition of a subpicosecond USP train amplified in a regenerative KrF amplifier with an unstable confocal resonator and a quasi-stationary lasing pulse. The USPs possess a high (0.2-0.3 TW) peak power and efficiently ionise oxygen molecules due to multiphoton ionisation, and the quasi-stationary lasing pulse, which has a relatively long duration (~100 ns), maintains the electron density at a level ne = (3-5) × 1014 cm—3 by suppressing electron attachment to oxygen. Experiments in laser triggering of high-voltage electric discharges suggest that the use of combined pulses results in a significant lowering of the breakdown threshold and enables controlling the discharge trajectory with a higher efficiency in comparison with smooth pulses. It was shown that controlled breakdowns may develop with a delay of tens of microseconds relative to the laser pulse, which is many orders of magnitude greater than the lifetime of free electrons in the laser-induced plasma. We propose a mechanism for this breakdown, which involves speeding-up of the avalanche ionisation of the air by negative molecular oxygen ions with a low electron binding energy (~0.5 eV) and a long lifetime (~1 ms), which are produced upon cessation of the laser pulse.

  16. [Cross-sectional study of heart failure of patients intaked in an internal medicine service in the third level hospital in mixed area. Part II: prevalence and hypertension control].

    Science.gov (United States)

    Cinza Sanjurjo, S; Cabarcos Ortiz de Barrón, A; Nieto Pol, E; Torre Carballada, J A

    2007-07-01

    To know the arterial hypertension prevalencia and hypertension control in the patients income by heart failure. A cross-sectional study of the intaked patients in the Internal Medicine Service in the Hospital Clínico Universitario de Santiago de Compostela between 1999 to 2003. The variables analysed were: sex, age, days of hospital stay, number of intaked by failure cardiac, reason for admission (guide symptom), hypertension, diabetes mellitus, cardiac disease, fibrillation atrium, previous treatment with beta-blockers, blood pressure in the admission moment, to make echocardiography, disfunction systolic, etiology, deceased, treatment at the end. The statistical analysis was performed with qualitative and quantitative measures, chi-cuadrado and t-student, and multivariant analyses. 248 patients were accepted for the study, and 100 were hypertensive patients (41.8%). We observed more women than men in hypertensive group (63.0%) and in non hypertensive group (51.1%). The median age was 77 years old in both groups. The median income was 11 days. The number of patients with diabetes mellitus and ischemic cardiopathy was bigger in hypertension group (43.0 vs. 22.3%), p < 0.001; (38 vs. 21.6%), p = 0.005. The most frequent symptom was the dyspnea (66,9%), in both groups, p = 0.62. The 62.6% of the patients were bad control of blood pressures. The prevalence of bad control in hypertensive patients was bigger tha non-hypertensive patients (76.9 vs. 59.4%, p = 0.01). The pharmacologic treatment more prescribed in hypertensive patients ECAI or AAR-II (62.6 vs. 26.8%, p < 0.001). And the diuretics wee more prescribed in non-hypertensive patients (91.1 vs. 81.1%, p = 0.03). The prevalence of diabetes mellitus is associated with hypertension in the patients. The ECAI prescription was acceptable. The number of echocardiograms practiced to the patients is smaller that the number advised by international associations and smaller to the cardiologist registers. The beta

  17. The influence of polymeric excipients on the process of pharmaceutical availability of therapeutic agents from a model drug form. Part I. In formulations with controlled disintegration and release time.

    Science.gov (United States)

    Nachajski, Michal Jakub; Zgoda, Marian Mikołaj

    2010-01-01

    Pre-formulation research was conducted on the application of Ex. Echinaceae aq. siccum in the production of a quickly disintegrating suspension tablet, a lozenge with kariostatic sugar alcohols (mannitol, sorbitol), and, above all, a solid drug form with controlled release of therapeutic agents included in the extract. Morphological parameters of tablets obtained in the course of experiment were estimated and the profiles of the release (diffusion) ofhydrophilic therapeutic agents into model receptor fluids with varying values of osmolarity (0.1 mol HCl approximately 200 mOsm/l, hypotonic hydrating fluid approximately 143 mOsm/l, and compensatory paediatric fluid approximately 272 mOsm/l) were examined. The study focused on the technological problem of determining the effect of hydrogel Carbopol structure on the ordering of diffusion ofhydrophilic therapeutic agents from a model drug form (a tablet) into model fluids with variable osmolarity.

  18. Consumer-choice health plan (first of two parts). Inflation and inequity in health care today: alternatives for cost control and an analysis of proposals for national health insurance.

    Science.gov (United States)

    Enthoven, A C

    1978-03-23

    The financing system for medical costs in this country suffers from severe inflation and inequity. The tax-supported system of fee for service for doctors, third-party intermediaries and cost reimbursement for hospitals produces inflation by rewarding cost-increasing behavior and failing to provide incentives for economy. The system is inequitable because the government pays more on behalf of those who choose more costly systems of care, because tax benefits subsidize the health insurance of the well-to-do, while not helping many low-income people, and because employment health insurance does not guarantee continuity of coverage and is regressive in its financing. Analysis of previous proposals for national health insurance shows none to be capable of solving most of these problems. Direct economic regulation by government will not improve the situation. Cost controls through incentives and regulated competition in the private sector are most likely to be effective.

  19. Analysis of industry-generated data. Part 1: a baseline for the development of a tool to assist the milk industry in designing sampling plans for controlling aflatoxin M1 in milk.

    Science.gov (United States)

    Trevisani, Marcello; Farkas, Zsuzsa; Serraino, Andrea; Zambrini, Angelo Vittorio; Pizzamiglio, Valentina; Giacometti, Federica; Ámbrus, Arpád

    2014-01-01

    The presence of aflatoxin M1 (AFM1) in milk was assessed in Italy in the framework of designing a monitoring plan actuated by the milk industry in the period 2005-10. Overall, 21,969 samples were taken from tankers collecting milk from 690 dairy farms. The milk samples were representative of the consignments of co-mingled milk received from multiple (two to six) farms. Systematic, biweekly sampling of consignments involved each of the 121 districts (70 in the North, 17 in the Central and 34 in the South regions of Italy). AFM1 concentration was measured using an enzyme-linked immunoassay method (validated within the range of 5-100 ng kg(-1)) whereas an HPLC method was used for the quantification of levels in the samples that had concentrations higher than 100 ng kg(-1). Process control charts using data collected in three processing plants illustrate, as an example, the seasonal variation of the contamination. The mean concentration of AFM1 was in the range between 11 and 19 ng kg(-1). The 90th and 99th percentile values were 19-34 and 41-91 ng kg(-1), respectively, and values as high as 280 ng kg(-1) were reached in 2008. The number of non-compliant consignments (those with an AFM1 concentration above the statutory limit of 50 ng kg(-1)) varied between 0.3% and 3.1% per year, with peaks in September, after the maize harvest season. The variability between different regions was not significant. The results show that controlling the aflatoxins in feed at farm level was inadequate, consequently screening of raw milk prior to processing was needed. The evaluation of the AFM1 contamination level observed during a long-term period can provide useful data for defining the frequency of sampling.

  20. Patient blood management in elective total hip- and knee-replacement surgery (part 2): a randomized controlled trial on blood salvage as transfusion alternative using a restrictive transfusion policy in patients with a preoperative hemoglobin above 13 g/dl.

    Science.gov (United States)

    So-Osman, Cynthia; Nelissen, Rob G H H; Koopman-van Gemert, Ankie W M M; Kluyver, Ewoud; Pöll, Ruud G; Onstenk, Ron; Van Hilten, Joost A; Jansen-Werkhoven, Thekla M; van den Hout, Wilbert B; Brand, Ronald; Brand, Anneke

    2014-04-01

    Patient blood management is introduced as a new concept that involves the combined use of transfusion alternatives. In elective adult total hip- or knee-replacement surgery patients, the authors conducted a large randomized study on the integrated use of erythropoietin, cell saver, and/or postoperative drain reinfusion devices (DRAIN) to evaluate allogeneic erythrocyte use, while applying a restrictive transfusion threshold. Patients with a preoperative hemoglobin level greater than 13 g/dl were ineligible for erythropoietin and evaluated for the effect of autologous blood reinfusion. Patients were randomized between autologous reinfusion by cell saver or DRAIN or no blood salvage device. Primary outcomes were mean intra- and postoperative erythrocyte use and proportion of transfused patients (transfusion rate). Secondary outcome was cost-effectiveness. In 1,759 evaluated total hip- and knee-replacement surgery patients, the mean erythrocyte use was 0.19 (SD, 0.9) erythrocyte units/patient in the autologous group (n = 1,061) and 0.22 (0.9) erythrocyte units/patient in the control group (n = 698) (P = 0.64). The transfusion rate was 7.7% in the autologous group compared with 8.3% in the control group (P = 0.19). No difference in erythrocyte use was found between cell saver and DRAIN groups. Costs were increased by €298 per patient (95% CI, 76 to 520). In patients with preoperative hemoglobin levels greater than 13 g/dl, autologous intra- and postoperative blood salvage devices were not effective as transfusion alternatives: use of these devices did not reduce erythrocyte use and increased costs.

  1. Numerical simulations for the sources apportionment and control strategies of PM2.5 over Pearl River Delta, China, part I: Inventory and PM2.5 sources apportionment.

    Science.gov (United States)

    Huang, Yeqi; Deng, Tao; Li, Zhenning; Wang, Nan; Yin, Chanqin; Wang, Shiqiang; Fan, Shaojia

    2018-09-01

    This article uses the WRF-CMAQ model to systematically study the source apportionment of PM 2.5 under typical meteorological conditions in the dry season (November 2010) in the Pearl River Delta (PRD). According to the geographical location and the relative magnitude of pollutant emission, Guangdong Province is divided into eight subdomains for source apportionment study. The Brute-Force Method (BFM) method was implemented to simulate the contribution from different regions to the PM 2.5 pollution in the PRD. Results show that the industrial sources accounted for the largest proportion. For emission species, the total amount of NO x and VOC in Guangdong Province, and NH 3 and VOC in Hunan Province are relatively larger. In Guangdong Province, the emission of SO 2 , NO x and VOC in the PRD are relatively larger, and the NH 3 emissions are higher outside the PRD. In northerly-controlled episodes, model simulations demonstrate that local emissions are important for PM 2.5 pollution in Guangzhou and Foshan. Meanwhile, emissions from Dongguan and Huizhou (DH), and out of Guangdong Province (SW) are important contributors for PM 2.5 pollution in Guangzhou. For PM 2.5 pollution in Foshan, emissions in Guangzhou and DH are the major contributors. In addition, high contribution ratio from DH only occurs in severe pollution periods. In southerly-controlled episode, contribution from the southern PRD increases. Local emissions and emissions from Shenzhen, DH, Zhuhai-Jiangmen-Zhongshan (ZJZ) are the major contributors. Regional contribution to the chemical compositions of PM 2.5 indicates that the sources of chemical components are similar to those of PM 2.5 . In particular, SO 4 2- is mainly sourced from emissions out of Guangdong Province, while the NO 3- and NH 4+ are more linked to agricultural emissions. Copyright © 2018 Elsevier B.V. All rights reserved.

  2. Part I. Emergency workers

    International Nuclear Information System (INIS)

    2004-01-01

    This monograph deals with assessment of radiological health effects of the Chernobyl accident for emergency workers (part 1) and the population of the contaminated areas in Russia (part 2). The Chernobyl emergency workers and people living in the contaminated areas of Russia received much lower doses than the population of Hiroshima and Nagasaki and it was unclear whether risks of radiation-induced cancers derived with the Japanese data could be extrapolated to the low dose range However, it was predicted as early as in 1990 that the thyroid cancer incidence might be increasing due to incorporated 131 irradiation. What conclusions can be drawn from regarding cancer incidence among emergency workers and residents of the contaminated areas in Russia and the role of the radiation factor on the basis of the registry data? Leukemia incidence. Leukemia incidence is known to be one of principal indications of radiation effects. The radiation risk for leukemias is 3-4 times higher that for solid cancers and its latent period is estimated to be 2-3 years after exposure. Results of the radiation epidemiological studies discussed in this book show that in the worst contaminated Bryansk region the leukemia incidence rate is not higher than in the country in general. Even though some evidence exists for the dose response relationship, the radiation risks appear to be not statistically significant. Since risks of leukemia are known to be higher for those who were children at exposure, long-term epidemiological studies need to be continued. The study of leukemias among emergency workers strongly suggest the existence of dose response relationship. In those who received external doses more than 0.15 Gy the leukemia incidence rate is two time higher and these emergency workers should be referred to as a group of increased radiation risk. Solid cancers. The obtained results provide no evidence to a radiation-induced increase in solid cancers among residents of the contaminated areas

  3. Part II. Population

    International Nuclear Information System (INIS)

    2004-01-01

    This monograph deals with assessment of radiological health effects of the Chernobyl accident for emergency workers (part 1) and the population of the contaminated areas in Russia (part 2). The Chernobyl emergency workers and people living in the contaminated areas of Russia received much lower doses than the population of Hiroshima and Nagasaki and it was unclear whether risks of radiation-induced cancers derived with the Japanese data could be extrapolated to the low dose range However, it was predicted as early as in 1990 that the thyroid cancer incidence might be increasing due to incorporated 131 irradiation. What conclusions can be drawn from regarding cancer incidence among emergency workers and residents of the contaminated areas in Russia and the role of the radiation factor on the basis of the registry data? Leukemia incidence. Leukemia incidence is known to be one of principal indications of radiation effects. The radiation risk for leukemias is 3-4 times higher that for solid cancers and its latent period is estimated to be 2-3 years after exposure. Results of the radiation epidemiological studies discussed in this book show that in the worst contaminated Bryansk region the leukemia incidence rate is not higher than in the country in general. Even though some evidence exists for the dose response relationship, the radiation risks appear to be not statistically significant. Since risks of leukemia are known to be higher for those who were children at exposure, long-term epidemiological studies need to be continued. The study of leukemias among emergency workers strongly suggest the existence of dose response relationship. In those who received external doses more than 0.15 Gy the leukemia incidence rate is two time higher and these emergency workers should be referred to as a group of increased radiation risk. Solid cancers. The obtained results provide no evidence to a radiation-induced increase in solid cancers among residents of the contaminated areas

  4. Parts Quality Management: Direct Part Marking via Data Matrix Symbols for Mission Assurance

    Science.gov (United States)

    Moss, Chantrice

    2013-01-01

    A United States Government Accountability Office (GAO) review of twelve NASA programs found widespread parts quality problems contributing to significant cost overruns, schedule delays, and reduced system reliability. Direct part-marking with Data Matrix symbols could significantly improve the quality of inventory control and parts lifecycle management. This paper examines the feasibility of using 15 marking technologies for use in future NASA programs. A structural analysis is based on marked material type, operational environment (e.g., ground, suborbital, orbital), durability of marks, ease of operation, reliability, and affordability. A cost-benefits analysis considers marking technology (data plates, label printing, direct part marking) and marking types (two-dimensional machine-readable, human-readable). Previous NASA parts marking efforts and historical cost data are accounted for, including in-house vs. outsourced marking. Some marking methods are still under development. While this paper focuses on NASA programs, results may be applicable to a variety of industrial environments.

  5. Randomized controlled within-subject evaluation of digital and conventional workflows for the fabrication of lithium disilicate single crowns. Part II: CAD-CAM versus conventional laboratory procedures.

    Science.gov (United States)

    Sailer, Irena; Benic, Goran I; Fehmer, Vincent; Hämmerle, Christoph H F; Mühlemann, Sven

    2017-07-01

    Clinical studies are needed to evaluate the entire digital and conventional workflows in prosthetic dentistry. The purpose of the second part of this clinical study was to compare the laboratory production time for tooth-supported single crowns made with 4 different digital workflows and 1 conventional workflow and to compare these crowns clinically. For each of 10 participants, a monolithic crown was fabricated in lithium disilicate-reinforced glass ceramic (IPS e.max CAD). The computer-aided design and computer-aided manufacturing (CAD-CAM) systems were Lava C.O.S. CAD software and centralized CAM (group L), Cares CAD software and centralized CAM (group iT), Cerec Connect CAD software and lab side CAM (group CiL), and Cerec Connect CAD software with centralized CAM (group CiD). The conventional fabrication (group K) included a wax pattern of the crown and heat pressing according to the lost-wax technique (IPS e.max Press). The time for the fabrication of the casts and the crowns was recorded. Subsequently, the crowns were clinically evaluated and the corresponding treatment times were recorded. The Paired Wilcoxon test with the Bonferroni correction was applied to detect differences among treatment groups (α=.05). The total mean (±standard deviation) active working time for the dental technician was 88 ±6 minutes in group L, 74 ±12 minutes in group iT, 74 ±5 minutes in group CiL, 92 ±8 minutes in group CiD, and 148 ±11 minutes in group K. The dental technician spent significantly more working time for the conventional workflow than for the digital workflows (P.05). Irrespective of the CAD-CAM system, the overall laboratory working time for a digital workflow was significantly shorter than for the conventional workflow, since the dental technician needed less active working time. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  6. A European randomised controlled trial of the addition of etoposide to standard vincristine and carboplatin induction as part of an 18-month treatment programme for childhood (≤16 years) low grade glioma - A final report.

    Science.gov (United States)

    Gnekow, Astrid K; Walker, David A; Kandels, Daniela; Picton, Susan; Giorgio Perilongo; Grill, Jacques; Stokland, Tore; Sandstrom, Per Eric; Warmuth-Metz, Monika; Pietsch, Torsten; Giangaspero, Felice; Schmidt, René; Faldum, Andreas; Kilmartin, Denise; De Paoli, Angela; De Salvo, Gian Luca

    2017-08-01

    The use of chemotherapy to manage newly diagnosed low grade glioma (LGG) was first introduced in the 1980s. One randomised trial has studied two- versus four-drug regimens with a duration of 12 months of treatment after resection. Within the European comprehensive treatment strategy for childhood LGG, the International Society of Paediatric Oncology-Low Grade Glioma (SIOP LGG) Committee launched a randomised trial involving 118 institutions and 11 countries to investigate the addition of etoposide (100 mg/m 2 , days 1, 2 & 3) to a four-course induction of vincristine (1.5 mg/m 2  × 10 wkly) and carboplatin (550 mg/m 2 q 3 weekly) as part of 18-month continuing treatment programme. Patients were recruited after imaging diagnosis, resection or biopsy with progressive disease/symptoms. Some 497 newly diagnosed patients (M/F 231/266; median age 4.26 years (interquartile range (IQR) 2.02-7.06)) were randomised to receive vincristine carboplatin (VC) (n = 249) or VC plus etoposide (VCE) during induction (n = 248), stratified by age and tumour site. No differences between the two arms were found in term of survival and radiological response. Response and non-progression rates at 24 weeks for VC and VCE, were 46% versus 41%, and 93% versus 91% respectively; 5-year Progression-Free Survival (PFS) and Overall Survival (OS) were 46% (StDev 3.5) versus 45% (StDev 3.5) and 89% (StDev 2.1) versus 89% (StDev 2.1) respectively. Age and diencephalic syndrome are adverse clinical risk factors for PFS and OS. 5-year OS for patients in early progression at week 24 were 46% (StDev 13.8) and 49% (StDev 16.5) in the two arms, respectively. The addition of etoposide to VC did not improve PFS or OS. High non-progression rates at 24 weeks justify retaining VC as standard first-line therapy. Infants with diencephalic syndrome and early progression need new treatments to be tested. Future trials should use neurological/visual and toxicity outcomes and be designed to

  7. Assessing spatial and temporal variability of phytoplankton communities' composition in the Iroise Sea ecosystem (Brittany, France): A 3D modeling approach. Part 1: Biophysical control over plankton functional types succession and distribution

    Science.gov (United States)

    Cadier, Mathilde; Gorgues, Thomas; Sourisseau, Marc; Edwards, Christopher A.; Aumont, Olivier; Marié, Louis; Memery, Laurent

    2017-01-01

    Understanding the dynamic interplay between physical, biogeochemical and biological processes represents a key challenge in oceanography, particularly in shelf seas where complex hydrodynamics are likely to drive nutrient distribution and niche partitioning of phytoplankton communities. The Iroise Sea includes a tidal front called the 'Ushant Front' that undergoes a pronounced seasonal cycle, with a marked signal during the summer. These characteristics as well as relatively good observational sampling make it a region of choice to study processes impacting phytoplankton dynamics. This innovative modeling study employs a phytoplankton-diversity model, coupled to a regional circulation model to explore mechanisms that alter biogeography of phytoplankton in this highly dynamic environment. Phytoplankton assemblages are mainly influenced by the depth of the mixed layer on a seasonal time scale. Indeed, solar incident irradiance is a limiting resource for phototrophic growth and small phytoplankton cells are advantaged over larger cells. This phenomenon is particularly relevant when vertical mixing is intense, such as during winter and early spring. Relaxation of wind-induced mixing in April causes an improvement of irradiance experienced by cells across the whole study area. This leads, in late spring, to a competitive advantage of larger functional groups such as diatoms as long as the nutrient supply is sufficient. This dominance of large, fast-growing autotrophic cells is also maintained during summer in the productive tidally-mixed shelf waters. In the oligotrophic surface layer of the western part of the Iroise Sea, small cells coexist in a greater proportion with large, nutrient limited cells. The productive Ushant tidal front's region (1800 mgC·m- 2·d- 1 between August and September) is also characterized by a high degree of coexistence between three functional groups (diatoms, micro/nano-flagellates and small eukaryotes/cyanobacteria). Consistent with

  8. Use of Novel High-Protein Functional Food Products as Part of a Calorie-Restricted Diet to Reduce Insulin Resistance and Increase Lean Body Mass in Adults: A Randomized Controlled Trial

    Directory of Open Access Journals (Sweden)

    Carol S. Johnston

    2017-10-01

    Full Text Available Significant reductions in insulin resistance (IR can be achieved by either calorie restriction or by the increase of lean mass. However, calorie restriction usually results in significant loss of lean mass. A 6-week randomized controlled feeding trial was conducted to determine if a calorie-restricted, high-protein diet (~125 g protein/day consumed evenly throughout the day using novel functional foods would be more successful for reducing IR in comparison to a conventional diet (~80 g protein/day with a similar level of calorie restriction. Healthy adults (age 20–75 years; body mass index, 20–42 kg/m2 with raised triglyceride/high-density lipoprotein ratios were randomly assigned to the control group (CON: test foods prepared using gluten-free commercial pasta and cereal or to the high-protein group (HPR: test foods prepared using novel high-protein pasta and cereal both rich in wheat gluten. Mean weight loss did not differ between groups (−2.7 ± 2.6 and −3.2 ± 3.0 kg for CON (n = 11 and HPR (n = 10 respectively, p = 0.801; however, the 6-week change in fat-free mass (FFM differed significantly between groups (−0.5 ± 1.5 and +1.5 ± 3.8 kg for CON and HPR respectively, p = 0.008. IR improved in HPR vs. CON participants (homeostasis model assessment-estimated insulin resistance [HOMAIR] change: −1.7 ± 1.4 and −0.7 ± 0.7 respectively; p = 0.020. The change in HOMA-IR was related to the change in FFM among participants (r = −0.511, p = 0.021. Thus, a high-protein diet using novel functional foods combined with modest calorie restriction was 140% more effective for reducing HOMA-IR in healthy adults compared to a lower protein, standard diet with an equal level of calorie restriction.

  9. Globalization in the pharmaceutical industry, Part II.

    Science.gov (United States)

    Casadio Tarabusi, C; Vickery, G

    1998-01-01

    This is the second of a two-part report on the pharmaceutical industry. Part II begins with a discussion of foreign direct investment and inter-firm networks, which covers international mergers, acquisitions, and minority participation; market shares of foreign-controlled firms; international collaboration agreements (with a special note on agreements in biotechnology); and licensing agreements. The final section of the report covers governmental policies on health and safety regulation, price regulation, industry and technology, trade, foreign investment, protection of intellectual property, and competition.

  10. Frontier of nanometer devices. Part 6. New devices with fully controlled electrons and photons. Nanometa debaisu kenkyu saizensen. 6. Denshi to koshi no kanzen seigyo wo mezashita jisedai debaisu

    Energy Technology Data Exchange (ETDEWEB)

    Arakawa, Y [The Univ. of Tokyo, Tokyo (Japan). Inst. of Industrial Science

    1994-06-20

    In the nanotechnology to realize an artificial structure of a magnitude of atomic size, new electron devices and photon devices are aimed by confining electron and controlling the behavior of the electron with transition of a quantum mechanical state including a tunneling effect. The degree of freedom of electron decreased when electron is confined in a very small area within semiconductor and is 1 in a quantum wire while it is 0 in a quantum box. Energy level of electron is completely dispersed. The condition required to realize the nanometer structure is examined and the formation techniques of semiconductor nanometer structure are studied. This paper describes research results by the authors aiming to realize quantum wire and quantum box structures. Ultrafine pattern of SiO2 is formed by electron beam drawing technique followed by crystal growth with a MOCVD method to form the quantum wire and quantum box structures successfully. Laser oscillation is successful at 77K with optical pumping using a quantum wire and vertical micro resonator. 5 refs., 7 figs.

  11. Randomized controlled multicenter study comparing short dental implants (6 mm) versus longer dental implants (11-15 mm) in combination with sinus floor elevation procedures. Part 2: clinical and radiographic outcomes at 1 year of loading.

    Science.gov (United States)

    Schincaglia, Gian Pietro; Thoma, Daniel S; Haas, Robert; Tutak, Marcin; Garcia, Abel; Taylor, Thomas D; Hämmerle, Christoph H F

    2015-11-01

    To compare, clinically and radiographically, short dental implants (6 mm) to long implants (11-15 mm) placed with sinus grafting. Participants with 5-7 mm of bone height in the posterior maxilla were randomly allocated to receive short implants (GS) or long implants with sinus grafting (GG). Implants were loaded with single crowns 6 months after placement (PR). Patients were re-evaluated 12 months after loading (FU-1). Outcome variables included: Implant survival rate (CSR), marginal bone level alteration (MBL), periodontal probing depth (PPD), bleeding on probing (BoP), plaque control record (PCR) and crown-to-implant ratios (C/I). Statistical analysis was performed using parametric tests. In 97 subjects, 132 implants were re-evaluated at FU-1. The CSR was 100%. The MBL from implant placement (IP) to (PR) was -0.22 ± 0.4 mm for GG and -0.3 ± 0.45 mm for GS (p 0.05), PPD (p = 1) and PCR (p = 0.09). BoP was higher in the GS (p = 0.04). The C/I was 0.99 ± 0.17 for GG and 1.86 ± 0.23 for GS (p < 0.001). No correlation was observed between C/I and MBL, (GG: p = 0.13; GS: p = 0.38). Both treatment modalities provided similar outcomes. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  12. Medicare Utilization for Part B

    Data.gov (United States)

    U.S. Department of Health & Human Services — This link takes you to the Medicare utilization statistics for Part B (Supplementary Medical Insurance SMI) which includes the Medicare Part B Physician and Supplier...

  13. Development of Aircraft Sandwich Parts

    Directory of Open Access Journals (Sweden)

    J. Křena

    2000-01-01

    Full Text Available The presented paper shows the design and development process of sandwich parts. A spoiler plate and a main landing gear door are developed. Sandwich parts are made of C/E composite facings and a foam core. FE models have been used for optimization of structures. Emphasis has been placed on deformations of parts under a few load cases. Experimental tests have been used for a verification of structure parts loaded by concentrated forces.

  14. The Impact of Massage Therapy on Function in Pain Populations-A Systematic Review and Meta-Analysis of Randomized Controlled Trials: Part I, Patients Experiencing Pain in the General Population.

    Science.gov (United States)

    Crawford, Cindy; Boyd, Courtney; Paat, Charmagne F; Price, Ashley; Xenakis, Lea; Yang, EunMee; Zhang, Weimin

    2016-07-01

    Pain is multi-dimensional and may be better addressed through a holistic, biopsychosocial approach. Massage therapy is commonly practiced among patients seeking pain management; however, its efficacy is unclear. This systematic review and meta-analysis is the first to rigorously assess the quality of massage therapy research and evidence for its efficacy in treating pain, function-related and health-related quality of life outcomes across all pain populations. Key databases were searched from inception through February 2014. Eligible randomized controlled trials were assessed for methodological quality using SIGN 50 Checklist. Meta-analysis was applied at the outcome level. A diverse steering committee interpreted the results to develop recommendations. Sixty high quality and seven low quality studies were included in the review. Results demonstrate massage therapy effectively treats pain compared to sham [standardized mean difference (SMD) = -.44], no treatment (SMD = -1.14), and active (SMD = -0.26) comparators. Compared to active comparators, massage therapy was also beneficial for treating anxiety (SMD = -0.57) and health-related quality of life (SMD = 0.14). Based on the evidence, massage therapy, compared to no treatment, should be strongly recommended as a pain management option. Massage therapy is weakly recommended for reducing pain, compared to other sham or active comparators, and improving mood and health-related quality of life, compared to other active comparators. Massage therapy safety, research challenges, how to address identified research gaps, and necessary next steps for implementing massage therapy as a viable pain management option are discussed.

  15. The Impact of Massage Therapy on Function in Pain Populations—A Systematic Review and Meta-Analysis of Randomized Controlled Trials: Part I, Patients Experiencing Pain in the General Population

    Science.gov (United States)

    Crawford, Cindy; Boyd, Courtney; Paat, Charmagne F; Price, Ashley; Xenakis, Lea; Yang, EunMee; Zhang, Weimin; Buckenmaier, Chester; Buckenmaier, Pamela; Cambron, Jerrilyn; Deery, Christopher; Schwartz, Jan; Werner, Ruth; Whitridge, Pete

    2016-01-01

    Abstract Purpose Pain is multi-dimensional and may be better addressed through a holistic, biopsychosocial approach. Massage therapy is commonly practiced among patients seeking pain management; however, its efficacy is unclear. This systematic review and meta-analysis is the first to rigorously assess the quality of massage therapy research and evidence for its efficacy in treating pain, function-related and health-related quality of life outcomes across all pain populations. Methods Key databases were searched from inception through February 2014. Eligible randomized controlled trials were assessed for methodological quality using SIGN 50 Checklist. Meta-analysis was applied at the outcome level. A diverse steering committee interpreted the results to develop recommendations. Results Sixty high quality and seven low quality studies were included in the review. Results demonstrate massage therapy effectively treats pain compared to sham [standardized mean difference (SMD) = −.44], no treatment (SMD = −1.14), and active (SMD = −0.26) comparators. Compared to active comparators, massage therapy was also beneficial for treating anxiety (SMD = −0.57) and health-related quality of life (SMD = 0.14). Conclusion Based on the evidence, massage therapy, compared to no treatment, should be strongly recommended as a pain management option. Massage therapy is weakly recommended for reducing pain, compared to other sham or active comparators, and improving mood and health-related quality of life, compared to other active comparators. Massage therapy safety, research challenges, how to address identified research gaps, and necessary next steps for implementing massage therapy as a viable pain management option are discussed. PMID:27165971

  16. Insulin regimens and glycemic control in different parts of Europe over 4years after starting insulin in people with type 2 diabetes: Data from the CREDIT non-interventional study.

    Science.gov (United States)

    Blonde, Lawrence; Marre, Michel; Vincent, Maya; Brette, Sandrine; Pilorget, Valerie; Danchin, Nicholas; Vespasiani, Giacomo; Home, Philip

    2017-11-01

    A number of insulin regimens are used in type 2 diabetes. This analysis aims to better understand the evolution of insulin therapy in different regions of Europe. Data from people starting any insulin were collected in eastern Europe (EEur: Croatia, Russia, Ukraine), northern Europe (NEur: Finland, Germany, UK) and southern Europe (SEur: France, Italy, Portugal, Spain). Retrospective data on starting insulin and prospective follow-up data were extracted from clinical records. At 4years, 1699 (76.0%) of 2236 eligible people had data. EEur participants were mostly female, younger and had shorter diabetes duration on starting insulin, yet had highest baseline HbA1c and more micro-/macrovascular disease. A majority (60%-64%) in all regions started on basal insulin alone, declining to 30%-38% at 4years, with most switching to basal+mealtime insulin regimen (24%-40%). Higher baseline (28%) and 4-year use (34%) of premix insulin was observed in NEur. Change in HbA1c (SD) ranged from -1.2 (2.1)% (-13 [23]mmol/mol) in NEur to -2.4 (2.0)% (-26 [22]mmol/mol) in EEur. Weight change ranged from +1.9 (8.3) kg in NEur to +3.2 (7.0) kg in SEur. Overall documented hypoglycemia ranged from 0.3 (1.3) to 1.3 (4.4) events/person/6-months (NEur vs. EEur, respectively) and was stable with time. Severe hypoglycemia rates remained low. When starting insulin, HbA1c and prevalence of complications were higher in EEur. Regional differences exist in choice of insulin regimens in Europe. However, people starting insulin improved and sustained their glycemic control regardless of regional differences or insulin regimens used. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

  17. Exploring Water Pollution. Part II

    Science.gov (United States)

    Rillo, Thomas J.

    1975-01-01

    This is part two of a three part article related to the science activity of exploring environmental problems. Part one dealt with background information for the classroom teacher. Presented here is a suggested lesson plan on water pollution. Objectives, important concepts and instructional procedures are suggested. (EB)

  18. Part Objects and Their Location

    DEFF Research Database (Denmark)

    Madsen, Ole Lehrmann; Møller-Pedersen, Birger

    1992-01-01

    The notion of location of part objects is introduced, yielding a reference to the containing object. Combined with locally defined objects and classes (block structure), singularly defined part objects, and references to part objects, it is a powerful language mechanism for defining objects...

  19. Vitiligo - Part 1*

    Science.gov (United States)

    Tarlé, Roberto Gomes; do Nascimento, Liliane Machado; Mira, Marcelo Távora; de Castro, Caio Cesar Silva

    2014-01-01

    Vitiligo is a chronic stigmatizing disease, already known for millennia, which mainly affects melanocytes from epidermis basal layer, leading to the development of hypochromic and achromic patches. Its estimated prevalence is 0.5% worldwide. The involvement of genetic factors controlling susceptibility to vitiligo has been studied over the last decades, and results of previous studies present vitiligo as a complex, multifactorial and polygenic disease. In this context, a few genes, including DDR1, XBP1 and NLRP1 have been consistently and functionally associated with the disease. Notwithstanding, environmental factors that precipitate or maintain the disease are yet to be described. The pathogenesis of vitiligo has not been totally clarified until now and many theories have been proposed. Of these, the autoimmune hypothesis is now the most cited and studied among experts. Dysfunction in metabolic pathways, which could lead to production of toxic metabolites causing damage to melanocytes, has also been investigated. Melanocytes adhesion deficit in patients with vitiligo is mainly speculated by the appearance of Köebner phenomenon, recently, new genes and proteins involved in this deficit have been found. PMID:24937821

  20. Control and optimal control theories with applications

    CERN Document Server

    Burghes, D N

    2004-01-01

    This sound introduction to classical and modern control theory concentrates on fundamental concepts. Employing the minimum of mathematical elaboration, it investigates the many applications of control theory to varied and important present-day problems, e.g. economic growth, resource depletion, disease epidemics, exploited population, and rocket trajectories. An original feature is the amount of space devoted to the important and fascinating subject of optimal control. The work is divided into two parts. Part one deals with the control of linear time-continuous systems, using both transfer fun