Itinerarios didácticos por la isla de Tenerife

OpenAIRE

Becerra Ramírez, María Carmen; Javier Dóniz-Páez; González Cárdenas, Elena; Gosálvez, Rafael U.; Becerra-Ramírez, Rafael; Escobar Lahoz, Estela

2013-01-01

Con la elaboración de esta guía de Itinerarios Didácticos por la isla de Tenerife pretendemos contribuir a un mayor conocimiento de las características geográficas de un espacio dominado por las formas y formaciones volcánicas que caracterizan un paisaje fuertemente modificado por la actividad humana. El hombre convive y usa lo que los volcanes le ofrecen, tradicionalmente como soporte de sus cultivos o de su actividad ganadera,y modernamente como base de la industria turística. Los itiner...

Comparative analysis of proposals for the planning of the aggregate industry on the island of Tenerife

Energy Technology Data Exchange (ETDEWEB)

HernAndez-Duran, G.; Arranz-Gonzalez, C.; Vega-Panizo, R. de la

2016-07-01

The island of Tenerife is a territory with numerous protected natural areas and other areas which also deserve environmental protection, due to their ecological and landscape richness and values. According to current planning regulations, the aggregate mining industry is limited to a number of areas called extractive zones. The delimitation of such areas has some flaws and inconsistencies from the environmental point of view and from the consideration of the productive capacity of mining resources. This paper shows two models for environmental planning applied to the extractive activity for aggregates for the island of Tenerife, which could serve as alternatives to the current planning model: a model called zoned and another designated as zone- concentrated. These models provide improvements as far as respect for environmental values are concerned and are based on knowledge of the spatial distribution of geological materials. The conclusion is that this knowledge of the distribution of the potential mineral resources in the territory is the key to achieving the effective integration of mining in land-use planning, and to safeguard in the best possible way the mineral resources from the activities that may compromise their future availability. The applied methods could be extended to other territories, particularly islands, where it is very possible that there are similar problems to those that are occurring in Tenerife. (Author)

Participatory Multi-Criteria Assessment of Forest Planning Policies in Conflicting Situations: The Case of Tenerife

Directory of Open Access Journals (Sweden)

Montserrat Acosta

2015-11-01

Full Text Available Sustainable forest planning should involve the participation of stakeholder communities in the decision-making process. This participation can help avoid the possible rejection of new planning measures. In this paper, the decision-making process to implement regulations on the use of forest tracks on the island of Tenerife (Canary Islands, Spain is analyzed. In recent years, the number of people using the island’s forest environments has notably increased, leading to conflicts between different users of the tracks; as a result, the Island Council of Tenerife is working on regulating these pathways. This paper describes the framing analysis, design, and implementation of a participatory multi-criteria approach to explore, together with stakeholders, the best policy alternatives related to forest planning and management issues of forest track use. To do this, a set of tools has been developed, consisting of institutional analysis, participatory methods, and multi-criteria assessment techniques.

Accumulating pollutants in conifer needles on an Atlantic island - A case study with Pinus canariensis on Tenerife, Canary Islands

International Nuclear Information System (INIS)

Tausz, Michael; Trummer, Walter; Goessler, Walter; Wonisch, Astrid; Grill, Dieter; Naumann, Simone; Jimenez, Maria Soledad; Morales, Domingo

2005-01-01

Concentrations of potential pollutant elements Na, Cl, and S were investigated in needles of Pinus canariensis grown at 55 field plots in Tenerife. Microelement concentrations (including heavy metals) were measured at a subset of 18 plots. Na and Cl concentrations were high at low elevations (up to 8 mg g -1 Cl and 5.5 mg g -1 Na). Na/Cl ratio close to standard seawater indicated sea spray influence up to 1200 m a.s.l. Only at few plots, sulphur concentrations indicated possible pollutant impact. Cluster and correlation analyses identified a related group of V, As, Cr, Fe, Mo, Ni, Cu, Pb, and Al, possibly related to traffic exhaust aggregated with soil particles. Mainly north-eastern, lower elevated plots were exposed to those immissions, but metal concentrations were generally low compared to data from other studies. In conclusion, seawater and soil particles explained most of the element distribution pattern in pine needles in Tenerife, but strong indications for some effect of local sources of air pollutants were detected. - Pollutant concentrations in pine needles indicate moderate local impact of sulphur, particulate matter, and sea sprays at lower elevation plots in Tenerife

Energía de oleaje en la isla de Tenerife

OpenAIRE

Imaz Gómez, Mario

2016-01-01

El objeto de este proyecto es realizar todos los estudios necesarios para la construcción de la primera fase de un parque de dispositivos de extracción de energía undimotriz que permita obtener información fiable y necesaria sobre el comportamiento de los dispositivos en grupo y poder ver si el rendimiento es el esperado para posteriormente realizar las otras dos fases con el fin de abastecer a la ciudad de Puerto de la Cruz, situada en el norte de la isla de Tenerife. Actualmente las energía...

Diversity hotspots of the laurel forest on Tenerife, Canary Islands: a phylogeographic study of Laurus and Ixanthus.

Science.gov (United States)

Betzin, Anja; Thiv, Mike; Koch, Marcus A

2016-09-01

Macaronesian laurel forest is among the worldwide hotspots of threatened biodiversity. With increasing evidence that woodland composition on the Canary Islands changed dramatically during the last few thousand years, the aim of this study was to find evidence for substantial recent population dynamics of two representative species from laurel forest. Amplified fragment length polymorphism (AFLP) was used to evaluate fine-scaled genetic variation of the paradigmatic tree Laurus novocanariensis (Lauraceae) and a long-lived herbaceous gentian from core laurel forest, Ixanthus viscosus (Gentianaceae), on Tenerife. Bioclimatic variables were analysed to study the respective climate niches. A chloroplast DNA screening was performed to evaluate additional genetic variation. Genetic diversity of the laurel tree showed severe geographic partitioning. On Tenerife, fine-scaled Bayesian clustering of genetic variation revealed a western and an eastern gene pool, separated by a zone of high admixture and with a third major gene pool. Compared with genetic clusters found on the other Canary Islands, the East-West differentiation on Tenerife seems to be more recent than differentiation between islands. This is substantiated by the finding of extremly low levels of chloroplast DNA-based polymorphisms. Ixanthus showed no geographic structuring of genetic variation. Genetic data from Tenerife indicate contemporary gene flow and dispersal on a micro/local scale rather than reflecting an old and relic woodland history. In particular for Laurus, it is shown that this species occupies a broad bioclimatic niche. This is not correlated with its respective distribution of genetic variation, therefore indicating its large potential for contemporary rapid and effective colonization. Ixanthus is more specialized to humid conditions and is mostly found in the natural Monteverde húmedo vegetation types, but even for this species indications for long-term persistence in the respective

Obstetric Violence, Another Form of Violence Against Women. The Tenerife Case

OpenAIRE

Rodríguez Ramos, Paulo Adrían; Aguilera Ávila, Laura

2017-01-01

IntroductionThe subject of this study is Obstetric Violence (OV). OV is understood as the different ways in which pregnant women, or those who are going into labor, are controlled and oppressed. OV may be considered as another type of gender-based violence because its aim is to control and oppress women. Additionally, OV could be considered as institutional and symbolic violence.ObjectivesThe aim of this study is to discover whether new mothers in Tenerife are being subject to Obstetric Viole...

A health-sanitary evaluation of lacteal desserts for consumption in Santa Cruz de Tenerife.

Science.gov (United States)

Rodríguez, C; Alvarez, R; Hardisson, A; Arias, A; Sierra, A

1994-01-01

The consumption of lacteal desserts in the province of Santa Cruz de Tenerife is notably high. However, there are no legal standards in Spain regarding microbiological quality. For this reason, we have decided that it would be of interest to carry out a health-sanitary study of these products, with the aim of discovering their microbial content. 330 samples of lacteal desserts on sale in the province of Santa Cruz de Tenerife have undergone analysis. They have been divided into three groups: cream caramel (egg and vanilla) (80), mousse (60) and the third group, known as "other desserts", which includes custard and the rest of lacteal desserts not included in the previous groupings (190). Neither E. coli, Salmonella spp., Shigella spp., nor Staphylococcus aureus have been detected in any of the samples analysed. In spite of the fact that the results obtained do not reflect high microbiological contamination, we consider it necessary to lay down legal standards, with reference values, for these lacteal products, which will guarantee good microbiological quality.

Trends in water reuse. The case of Tenerife; Tendencias en la reutilizacion de aguas. El caso de Tenerife

Energy Technology Data Exchange (ETDEWEB)

Delgado Diaz, S. N.

2003-07-01

In this work a bibliographic review on the general situation of water resources in the world is presented, emphasizing especially the problematic which appears in arid and semi-arid regions due to the scarcity of the liquid element. Water reuse, for different purposes, is an interesting alternative which enables to mitigate, al least partially, the lack of water resources. >From this point of view, in this work a summarized vision of the most frequent applications of reclaimed water reuse is given, as well as the trends observed. At the same time, information on the particular case of Tenerife is supplied, where a planed water reuse system exists, which reuses reclaimed domestic water for crop irrigation. In the paper the reuse scheme is described, and information on the system performance is given, collected through several research works which have been carried out during the last years. (Author) 24 refs.

The project of installing a ZIMPOL_3 polarimeter at GREGOR in Tenerife

OpenAIRE

Michele Bianda; Renzo Ramelli; Jan Olof Stenflo; Svetlana Berdyugina; Daniel Gisler; Ivan Defilippis; Nazaret Bello Gonzáles

2013-01-01

A project of collaboration between Kiepenheuer Institut für Sonnenphysik KIS and Istituto Ricerche Solari Locarno IRSOL includes the installation of a ZIMPOL_3 high resolution polarimeter at the 1.5 meter aperture solar telescope GREGOR in Tenerife. Important scientific topics are expected to be investigated in particular in the case of events showing faint amplitude polarization signatures like scattering polarization effects and the Hanle effect. This project has also a technical importance...

El centro histórico de la villa de Candelaria (Tenerife

Directory of Open Access Journals (Sweden)

Juan Sebastián López García

2013-11-01

Full Text Available Candelaria destaca en Tenerife con un alto grado de significación por el protagonismo que tuvo en algunos episodios notables de la isla. La Aparición de la imagen de la Virgen en estas tierras del menceyato de Güimar constituyo una singular página de Ia etapa de contactos entre la cultura guanche y los primeros evangelizadores de Canarias, circunstancia que derivará en la particular devoción que el pueblo tinerfeño y canario dispensará a esta advocación mariana a través de los siglos. Si se le compara con otros centros históricos tinerfeños, Candelaria contrasta con ellos por la modestia de su núcleo. En sus orígenes, pasó por varias vicisitudes durante los siglos XV y XVI, para comenzar a consolidarse a partir de las centurias del XVII y XVIII. Una serie de espacios e inmuebles formarán parte de su constante histórica y atestiguarán este pasado, entre ellos destacan la Cueva de los Camellos, la Cueva de Achbinico- San Blas, Convento de Dominicos, Basílica de Nuestra Señora de Candelaria, plaza de los peregrinos, Casa del Cabildo, Iglesia de Santa Ana, etc.Candelaria stands out within Tenerife for its leading role in some of the most outstanding episodes of the Island. The appearance of Virgin Mary within the lands of the Güimar "menceyato", was a singularly important episode in the period of contact between "guanche" culture and the first wave of evangelists that arrived in the Canaries. This circumstance led to the particularly strong devotion felt throughout the Centuries by the inhabitants of Tencrife, as well as by canarians in general, to the worship of Virgin Mary. In contrast to other historical centres in Tenerife, Candelaria has a small core, which started to consolidate from the seventeenth and eighteenth centuries onwards. A series of public spaces and buildings stand witness to thi spast; standing out amongst them are the Camel's Cave, the Cave of Achbinico-San Blas, the Convent of the Dorninicans, the Basilica

Potencialidad e integración del “turismo del vino” en un destino de sol y playa: el caso de Tenerife

Directory of Open Access Journals (Sweden)

Díaz Armas, Ricardo J.

2008-04-01

Full Text Available Tourism wine is different in massive sun and sand destination. In this case the winery lives with this tourism model and is a complementary product that promotes diversification in the current destination. Tourism wine can complement the existing tourism offer. The regions could rely on the experience and knowledge of wine by the visitor and use them as fact differential competitive with other destinations that do not have this feature. It also should promote the launch of the wine tourism because the potential demand is in the tourist areas, next to the wine area. Once we discover the motivations to came to Tenerife destination, we located a sensitive market to the wine route Tacoronte-Acentejo. This market is in Puerto de la Cruz (one of the major tourist areas of Tenerife, because the analysis of benefits sought of visitors from Puerto de la Cruz, has contrasted the existence of two segments that can be attracted to the current wine route, Tacoronte-Acentejo. This segment wants, in addition to the climate and the sun and sand (main motivations for travel destination Tenerife, other benefits that are likely to be offered by the wine route.

Neoparamoeba branchiphila infections in moribund sea urchins Diadema aff. antillarum in Tenerife, Canary Islands, Spain

Czech Academy of Sciences Publication Activity Database

Dyková, Iva; Lorenzo-Morales, J.; Kostka, Martin; Valladares, B.; Pecková, Hana

2011-01-01

Roč. 95, č. 3 (2011), 225-231 ISSN 0177-5103 R&D Projects: GA ČR GA524/09/0137; GA MŠk LC522 Institutional research plan: CEZ:AV0Z60220518 Keywords : Neoparamoeba * Diadema aff. antillarum * SSU rDNA phylogeny * Tenerife Subject RIV: GJ - Animal Vermins ; Diseases, Veterinary Medicine Impact factor: 2.201, year: 2011

Quantification of Fog Water Collection in Three Locations of Tenerife (Canary Islands)

OpenAIRE

Ritter, Axel; Regalado, Carlos; Guerra, Juan

2015-01-01

We present the results of fog water collection obtained with cylindrical fog gauges at three locations on the northern side of Tenerife island (Spain): La Esperanza (1093 m a.s.l.), Taborno (1015 m a.s.l.), and El Gaitero (1747 m a.s.l.). Concomitant meteorological variables were also measured. We show that fog precipitation was more frequent than rainfall. However, the volumes and frequency of daily fog water collection varied among the three studied sites, usually not exceeding 10–40 L d−1/...

El Cine durante la Primera Guerra Mundia a través de las páginas del diario El Progreso de Tenerife

OpenAIRE

Orlando Betancor

2013-01-01

Este artículo analiza el tratamiento in­formativo dado a las películas cinematográfi­cas en las páginas del periódico El Progreso de Santa Cruz de Tenerife durante la Primera Guerra Mundial. Además, recoge los princi­pales acontecimientos cinematográficos que tuvieron lugar en Tenerife en este momento y su repercusión en este diario. Investiga el papel de los anuncios publicitarios de los loca­les de exhibición, editados en este periódico, que mostraron al público de la Isla estas obras de ar...

40Ar/39Ar stratigraphy of pyroclastic units from the Cañadas Volcanic Edifice (Tenerife, Canary Islands) and their bearing on the structural evolution

OpenAIRE

Huertas Coronel, María José; Arnaud, N.; Ancochea Soto, Eumenio; Cantagrel, Jean Marie; Fúster Casas, José María

2002-01-01

Many felsic pyroclastic units of various types are exposed in different sectors of Tenerife. New 40Ar/39Ar determinations allow them to be placed more precisely in the general volcano-stratigraphic succession. According to geographic distribution, stratigraphic position and isotopic ages, four main pyroclastic phases may be identified. The first, San Juan de la Rambla phase (2.1 Ma), is only known in the north of Tenerife in the Tigaiga massif. The second, Adeje phase (1.8–1.5 Ma), is most co...

On the detectability of Teide volcano magma chambers (Tenerife, Canary Islands) with magnetotelluric data

Science.gov (United States)

Piña-Varas, Perla; Ledo, Juanjo; Queralt, Pilar; Marcuello, Alex; Perez, Nemesio

2018-01-01

Tenerife has been the subject of numerous studies covering a wide range of fields. Many studies have been focused on characterising the magmatic plumbing system. Even so, a controversy still exists regarding the location and size of the current magma chambers. Several magnetotelluric (MT) surveys have been carried out in the island, but no conductivity anomalies associated with the chambers have been detected. We report the results of a set of tests conducted against the 3-D resistivity model of the island, to determine the characteristics of the detectable chambers with the MT data. The most remarkable results indicate that the MT dataset is incompatible with a large-scale mafic reservoir located at shallower depths than 8 km b.s.l. However, shallower phonolitic chambers smaller than 3 × 3 × 1 km3 could be undetected by the existing MT sites and new data should be acquired to confirm or not their existence. This new information is essential in volcanic islands like Tenerife, since many volcanic hazards are related to the size and depth of the sources of magma. Additionally, a joint interpretation of the obtained results together with other information is summarised in a hypothetical model, allowing us to better understand the internal structure of the island.[Figure not available: see fulltext.

Source areas and long-range transport of pollen from continental land to Tenerife (Canary Islands).

Science.gov (United States)

Izquierdo, Rebeca; Belmonte, Jordina; Avila, Anna; Alarcón, Marta; Cuevas, Emilio; Alonso-Pérez, Silvia

2011-01-01

The Canary Islands, due to their geographical position, constitute an adequate site for the study of long-range pollen transport from the surrounding land masses. In this study, we analyzed airborne pollen counts at two sites: Santa Cruz de Tenerife (SCO), at sea level corresponding to the marine boundary layer (MBL), and Izaña at 2,367 m.a.s.l. corresponding to the free troposphere (FT), for the years 2006 and 2007. We used three approaches to describe pollen transport: (1) a classification of provenances with an ANOVA test to describe pollen count differences between sectors; (2) a study of special events of high pollen concentrations, taking into consideration the corresponding meteorological synoptic pattern responsible for transport and back trajectories; and (3) a source-receptor model applied to a selection of the pollen taxa to show pollen source areas. Our results indicate several extra-regional pollen transport episodes to Tenerife. The main provenances were: (1) the Mediterranean region, especially the southern Iberian Peninsula and Morocco, through the trade winds in the MBL. These episodes were characterized by the presence of pollen from trees (Casuarina, Olea, Quercus perennial and deciduous types) mixed with pollen from herbs (Artemisia, Chenopodiaceae/Amaranthaceae and Poaceae wild type). (2) The Saharan sector, through transport at the MBL level carrying pollen principally from herbs (Chenopodiaceae-Amaranthaceae, Cyperaceae and Poaceae wild type) and, in one case, Casuarina pollen, uplifted to the free troposphere. And (3) the Sahel, characterized by low pollen concentrations of Arecaceae, Chenopodiaceae-Amaranthaceae, Cyperaceae and Poaceae wild type in sporadic episodes. This research shows that sporadic events of long-range pollen transport need to be taken into consideration in Tenerife as possible responsible agents in respiratory allergy episodes. In particular, it is estimated that 89-97% of annual counts of the highly allergenous Olea

Source areas and long-range transport of pollen from continental land to Tenerife (Canary Islands)

Science.gov (United States)

Izquierdo, Rebeca; Belmonte, Jordina; Avila, Anna; Alarcón, Marta; Cuevas, Emilio; Alonso-Pérez, Silvia

2011-01-01

The Canary Islands, due to their geographical position, constitute an adequate site for the study of long-range pollen transport from the surrounding land masses. In this study, we analyzed airborne pollen counts at two sites: Santa Cruz de Tenerife (SCO), at sea level corresponding to the marine boundary layer (MBL), and Izaña at 2,367 m.a.s.l. corresponding to the free troposphere (FT), for the years 2006 and 2007. We used three approaches to describe pollen transport: (1) a classification of provenances with an ANOVA test to describe pollen count differences between sectors; (2) a study of special events of high pollen concentrations, taking into consideration the corresponding meteorological synoptic pattern responsible for transport and back trajectories; and (3) a source-receptor model applied to a selection of the pollen taxa to show pollen source areas. Our results indicate several extra-regional pollen transport episodes to Tenerife. The main provenances were: (1) the Mediterranean region, especially the southern Iberian Peninsula and Morocco, through the trade winds in the MBL. These episodes were characterized by the presence of pollen from trees ( Casuarina, Olea, Quercus perennial and deciduous types) mixed with pollen from herbs ( Artemisia, Chenopodiaceae/Amaranthaceae and Poaceae wild type). (2) The Saharan sector, through transport at the MBL level carrying pollen principally from herbs (Chenopodiaceae-Amaranthaceae, Cyperaceae and Poaceae wild type) and, in one case, Casuarina pollen, uplifted to the free troposphere. And (3) the Sahel, characterized by low pollen concentrations of Arecaceae, Chenopodiaceae-Amaranthaceae, Cyperaceae and Poaceae wild type in sporadic episodes. This research shows that sporadic events of long-range pollen transport need to be taken into consideration in Tenerife as possible responsible agents in respiratory allergy episodes. In particular, it is estimated that 89-97% of annual counts of the highly allergenous Olea

Changes in infiltration rate into Andisols for change of use (Tenerife, Canary I.)

International Nuclear Information System (INIS)

Neris, J.; Fuentes, J.; Dorta, M. A.; Jimenez, C.; Tejedor, M.

2009-01-01

The volcanic island of Tenerife (Canary Islands) has a wide variety of Andisols which have formed on recent pyroclast materials (Udands, Ustands, Xerands and Vitrands. The Udands are situated on the nor then side of the island, at heights where condensation of the trade winds occurs (900-1600m), while the Ustands are also located mostly on this side, albeit at a lower attitudinal strip. Under natural conditions, these soils present favourable physical properties, with high structural stability and resistance to water erosion. (Author) 11 refs.

STELLA: 10 years of robotic observations on Tenerife

Science.gov (United States)

Weber, Michael; Granzer, Thomas; Strassmeier, Klaus G.

2016-07-01

STELLA is a robotic observatory on Tenerife housing two 1.2m robotic telescopes. One telescope is fibre-feeding a high-resolution (R=55,000) échelle spectrograph (SES), while the other telescope is equipped with a visible wide- field (FOV=22' x 22') imaging instrument (WiFSIP). Robotic observations started mid 2006, and the primary scientific driver is monitoring of stellar-activity related phenomena. The STELLA Control System (SCS) software package was originally tailored to the STELLA roll-off style building and high-resolution spectroscopy, but was extended over the years to support the wide-field imager, an off-axis guider for the imager, separate acquisition telescopes, classical domes, and targets-of-opportunity. The SCS allows for unattended, off-line operation of the observatory, targets can be uploaded at any time and are selected based on merit-functions in real-time (dispatch scheduling). We report on the current status of the observatory and the current capabilities of the SCS.

Dataciones radiometricas (14C y K/Ar del Teide y el Rift noroeste, Tenerife, Islas Canarias

Directory of Open Access Journals (Sweden)

Hansen, A.

2003-08-01

Full Text Available Teide volcano, the highest volcano on earth (3,718 m a.s.l., > 7 km high after Mauna Loa and Mauna Kea in the Hawaiian Islands, forms a volcanic complex in the centre of the island of Tenerife. Its most recent eruptive activity (last 20 Ka is associated with the very active NW branch of the 120" triple rift system of the island. Most of the eruptions of Tenerife during the past 20 Ka have occurred along these volcanic features, frequently in the production of extensive mafic and felsic lava flows, many of which reached the coast, crossing what is now one of the most densely populated areas of Tenerife and of any oceanic island in the world. However, despite numerous previous studies, very important basic geological information is still lacking, in particular dating of these flows to construct a geochronological framework for the evolution of the Teide-NW rift system, and a scientifically based, much needed volcanic hazard assessment. New carbon- 14 ages, obtained via coupled mass spectrometry (other in progress, provide important time constraints on the evoliition of Teide's volcanic system, the frequency and distribution of its eruptions, and associated volcanic hazards. Most of the eruptions are not related to the Teide stratovolcano, which apparently had only one eruption in the last 20 Ka about 1,240 f 60 years BP (between 1,287 CAL years BP and 1,007 CAL years BP, corresponding to a time interval between the VI1 and X centuries, 663 years AD to 943 years AD, but to the Pico Viejo volcano (17,570 f 150 years BP, flank parasitic vents (Mña. Abejera upper vent, 5,170 f 110 years BP; Mña. Abejera lower vent, 4,790 f 70 years BP; Mña. de La Angostura early, 2,420 f 70 years BP; Mña. La Angostura late, 2,010 f 60 years BP and Roques Blancos, 1,790 f 60 years BP and the NW rift (Mña. Chío, 3,620 f 70 years BP. Although the volcanic activity during the past 20 Ka involved at least 7 voluminous phonolitic flank vents in the northem, more

Pre-eruptive conditions of the phonolitic magma from the El Abrigo caldera-forming eruption (Las Canadas caldera, Tenerife, Canary Islands)

International Nuclear Information System (INIS)

Marti, J; Andujar, J; Costa, F; Wolff, J A; Carroll, M R

2008-01-01

We have performed phase equilibrium experiments to determine the pre-eruptive conditions of the largest phonolitic caldera-forming eruption (∼20 km3 of DRE) that occurred on Tenerife (Canary Islands). The Abrigo ignimbrite was erupted during the last caldera-forming episode (ca. 190 ka), from the Canadas caldera. Comparison of the natural and experimental phase proportions and compositions indicates that the phonolite at the roof of the Abrigo magma reservoir was at 130 ± 50 MPa (corresponding to ca. 4 - 5 km below the surface), 825 ± 25 oC, with 3 ± 1 wt% dissolved H2O and fO2 at the Ni-NiO buffer ? 1 log unit. This shows that the magma that produced the largest ignimbrite on Tenerife was stored at relatively shallow depths but was water-undersaturated, and its eruption was probably triggered by input of fresh mafic magma.

Pre-eruptive conditions of the phonolitic magma from the El Abrigo caldera-forming eruption (Las Canadas caldera, Tenerife, Canary Islands)

Energy Technology Data Exchange (ETDEWEB)

Marti, J; Andujar, J; Costa, F [Institute of Earth Sciences ' Jaume Almera' , CSIC, C/ Lluis Sole I Sabaris, s/n Barcelona, 08028 Spain (Spain); Wolff, J A [School of Earth and Environmental Sciences, Washington State University, Pullman, WA 99164-2812 (United States); Carroll, M R [Dipartimento di Scienze della Terra, Via Gentile III da Varano, Universita di Camerino, 62032 MC (Italy)], E-mail: jawolff@mail.wsu.edu, E-mail: Michael.carroll@unicam.it

2008-10-01

We have performed phase equilibrium experiments to determine the pre-eruptive conditions of the largest phonolitic caldera-forming eruption ({approx}20 km3 of DRE) that occurred on Tenerife (Canary Islands). The Abrigo ignimbrite was erupted during the last caldera-forming episode (ca. 190 ka), from the Canadas caldera. Comparison of the natural and experimental phase proportions and compositions indicates that the phonolite at the roof of the Abrigo magma reservoir was at 130 {+-} 50 MPa (corresponding to ca. 4 - 5 km below the surface), 825 {+-} 25 oC, with 3 {+-} 1 wt% dissolved H2O and fO2 at the Ni-NiO buffer ? 1 log unit. This shows that the magma that produced the largest ignimbrite on Tenerife was stored at relatively shallow depths but was water-undersaturated, and its eruption was probably triggered by input of fresh mafic magma.

Caracterización morfoscópica de los materiales piroclásticos sálicos del sur de Tenerife (Islas Canarias

Directory of Open Access Journals (Sweden)

Alonso, J. J.

1987-12-01

Full Text Available In this work, several morphological aspects of volcanic ash grains from southern Tenerife are studied by S.E.M. Important variations in vesiculation, fracture and wheathering of pyroclasts are observed. It's possible to characterize diferent types of deposits (pyroclastic falIs, pyroclastic flow, surges, etc. in function of the pumice fragments surface.En este trabajo se estudian mediante M.E.B. (Microscopio Electrónico de Barrido diversos aspectos morfológicos de granos de cenizas volcánicas del sur de Tenerife. Son observadas importantes variaciones en la vesiculación, fracturación y alteraciones de los piroclastos. Es posible caracterizar distintos tipos de depósitos (piroclastos de caída, coladas piroclásticas, surges, etc. en función de las características superficiales de los fragmentos pumíticos.

Spatial and temporal variations of diffuse CO_{2} degassing at the Tenerife North-South Rift Zone (NSRZ) volcano (Canary Islands) during the period 2002-2016

Science.gov (United States)

Rodríguez, Fátima; McCollum, John J. K.; Orland, Elijah D. M.; Barrancos, José; Padilla, Germán D.; Calvo, David; Amonte, Cecilia; Pérez, Nemesio M.

2017-04-01

Subaerial volcanic activity on Tenerife (2034 km2), the largest island of the Canary archipelago, started 14 My ago and 4 volcanic eruptions have occurred in historical times during the last 300 years. The main volcano-structural and geomorphological features of Tenerife are (i) the central volcanic complex, nowadays formed by Las Cañadas caldera, a volcanic depression measuring 16×9 km that resulted from multiple vertical collapses and partially filled by post-caldera volcanic products and (ii) the triple junction-shaped rift system, formed by numerous aligned monogenetic cones. Up to 297 mafic monogenetic cones have been recognized on Tenerife, and they represent the most common eruptive activity occurring on the island during the last 1 My (Dóniz et al., 2008). The North-South Rift Zone (NSRZ) of Tenerife comprises at least 139 cones. The main structural characteristic of the NSRZ of the island is an apparent absence of a distinct ridge, and a fan shaped distribution of monogenetic cones. Since there are currently no visible gas emissions at the NSRZ, diffuse degassing surveys have become an important geochemical tool for the surveillance of this volcanic system. Five diffuse CO2 degassing surveys have been carried out at NSRZ of Tenerife since 2002, the last one in the summer period of 2016, to evaluate the spatio-temporal variations of CO2 degassing as a volcanic surveillance tool for the NSRZ of Tenerife. At each survey, around 600 sampling sites were selected to cover homogenously the study area (325 km2) using the accumulation chamber method. The diffuse CO2 output ranged from 78 to 707 t/d in the study period, with the highest emission rate measured in 2015. The backgroung emission rate was estimated in 300 t/d. The last results the soil CO2 efflux values ranged from non-detectable up to 24.7 g m-2 d-1. The spatial distribution map, constructed following the sequential Gaussian simulation (sGs) procedure, showed the highest CO2 values as multiple

Impact of Electric Vehicles as Distributed Energy Storage in Isolated Systems: The Case of Tenerife

Directory of Open Access Journals (Sweden)

Alfredo Ramírez Díaz

2015-11-01

Full Text Available Isolated regions are highly dependent on fossil fuels. The use of endogenous sources and the improvement in energy efficiency in all of the consumption activities are the two main ways to reduce the dependence of petroleum-derived fuels. Tenerife offers an excellent renewable resource (hours of sun and wind. However, the massive development of these technologies could cause important operational problems within the electric power grids, because of the small size of the system. In this paper, we explore the option of coupling an electric vehicle fleet as a distributed energy storage system to increase the participation of renewables in an isolated power system, i.e., Tenerife Island. A model simulator has been used to evaluate five key outputs, that is the renewable share, the energy spilled, the CO2 emissions, the levelized cost of generating electricity and fuel dependence, under alternative scenarios. Comparing to the current situation, combining a gradual renewable installed capacity and the introduction of an electric vehicle fleet using alternative charging strategies, a total of 30 different scenarios have been evaluated. Results shows that the impact of 50,000 electric vehicles would increase the renewable share in the electricity mix of the island up to 30%, reduce CO2 emissions by 27%, the total cost of electric generation by 6% and the oil internal market by 16%.

Parasites of Columba livia (Aves: Columbiformes) in Tenerife (Canary Islands) and their role in the conservation biology of the laurel pigeons.

Science.gov (United States)

Foronda, P; Valladares, B; Rivera-Medina, J A; Figueruelo, E; Abreu, N; Casanova, J C

2004-09-01

The prevalence and intensity of the parasites from 50 wild doves (Columba livia) from the city of Santa Cruz de Tenerife, in the island of Tenerife (Canary Archipelago), were studied. The following ectoparasites were found in apparently healthy pigeons (prevalences are shown in percentage (%) and mean intensities with their standard deviations): the acari Dermanyssus gallinae (De Geer, 1778) (6, 241.0 +/- 138.9) and Tinaminyssus melloi Fain, 1962 (10%, 218.3 +/- 117.3); the louses, Columbicola columbae Linnaeus, 1758 (100%, 111.4 +/- 76.8) and Campanulotes bidentatus Scopoli, 1763 (94%, 48.4 +/- 26.6); and the pigeon fly, Pseudolynchia canariensis Macquart, 1839 (36%, 6.2 +/- 1.6). The endoparasites we found were: a haemoprotozoan species, Haemoproteus columbae Kruze, 1890 (82%, 14.8 +/- 10.3 per 1000); coccidian oocysts, Eimeria sp. (50%, 0.2 x 10(3) +/- 1.7 x 10(3) per gr); a cestode species Raillietina micracantha (Fuhrmann, 1909) López Neyra, 1947 (44%, 12.3 +/- 9.4); and four nematode species, Tetrameres (Tetrameres) fissispina (Diesing, 1861) Travassos, 1915 (4%, 99.5 +/- 34.1), Synhimantus (Dispharynx) spiralis (Molin, 1858) (8%, 46.8 +/- 11.6), Ascaridia columbae (Gmelin, 1790) Travassos, 1913 (40%, 8.4 +/- 8.8) and Aonchotheca sp. (18%, 6.0 +/- 3.1). Several species detected in our study can be pathogens for C. bollii and C. junoniae, which are endemic pigeons of the Canary Islands, considered endangered species. Parasites (ectoparasites, protozoa and helminths) of C. livia found in Tenerife and others from wild and farm birds in the island were considered as healthy controls.

Anomalous changes of diffuse CO_{2} emission and seismic activity at Teide volcano, Tenerife, Canary Islands

Science.gov (United States)

García-Hernández, Rubén; Melián, Gladys; D'Auria, Luca; Asensio-Ramos, María; Alonso, Mar; Padilla, Germán D.; Rodríguez, Fátima; Padrón, Eleazar; Barrancos, José; García-Merino, Marta; Amonte, Cecilia; Pérez, Aarón; Calvo, David; Hernández, Pedro A.; Pérez, Nemesio M.

2017-04-01

Tenerife (2034 km2) is the largest of the Canary Islands and hosts four main active volcanic edifices: three volcanic rifts and a central volcanic complex, Las Cañadas, which is characterized by the eruption of differentiated magmas. Laying inside Las Cañadas a twin stratovolcanoes system, Pico Viejo and Teide, has been developed. Although there are no visible gas emanations along the volcanic rifts of Tenerife, the existence of a volcanic-hydrothermal system beneath Teide volcano is suggested by the occurrence of a weak fumarolic system, steamy ground and high rates of diffuse CO2 degassing all around the summit cone of Teide. Soil CO2 efflux surveys have been performed at the summit crater of Teide volcano since 1999, to determine the diffuse CO2 emission from the summit crater and to evaluate the temporal variations of CO2 efflux and their relationships with seismic-volcanic activity. Soil CO2 efflux and soil temperature have been always measured at the same 38 observation sites homogeneously distributed within an area of about 6,972 m2 inside the summit crater. Soil CO2 diffuse effluxes were estimated according to the accumulation chamber method by means of a non-dispersive infrared (NDIR) LICOR-820 CO2 analyzer. Historical seismic activity in Tenerife has been characterized by low- to moderate-magnitude events (M de Canarias (INVOLCAN) registered an earthquake of M 2.5 located in the vertical of Teide volcano with a depth of 6.6 km. It was the strongest earthquake located inside Cañadas caldera since 2004. Between October 11 and December 13, 2016, a continuous increase on the diffuse CO2 emission was registered, from 21.3 ± 2.0 to 101.7 ± 20.7 t d-1, suggesting the occurrence of future increase in the seismic-volcanic activity. In fact, this precursory signal preceded the occurrence of the 2.5 seismic event and no significant horizontal and vertical displacements were registered by the Canary GPS network belonged to INVOLCAN. This seismic event was

Waste Water reuse in Tenerife. Equipment to improve water quality for agriculture use; Reutilizacion de aguas depuradas en la Isla de Tenerife. Instalaciones para la mejora de la calidad para uso agricola

Energy Technology Data Exchange (ETDEWEB)

Aguiar, E.; Delgado, S.; Renz, O.; Gonzalez, A.

1999-06-01

In this work it is briefly shown the infrastructure of reclaimed water reuse for agriculture in Tenerife (Canary Islands-Spain). The problems dealing with the lack of water resources in the island and the growth of reclaimed water demand are explained. It is also commented the invetment done in the actual infrastructure, analizing the more economically important items. This work compares the price of reclaimed water with the price of the conventional irrigation water. Finally, the process of waste water desalination down to the required salinity is shortly explained and the cost of it is also evaluated. (Author) 13 refs.

Temporal Variations of Shallow Subtidal Meiofauna in Los Cristianos Bay (Tenerife, Canary Islands, Ne Atlantic Ocean)

OpenAIRE

Riera, Rodrigo; Nunez, Jorge; Brito, Maria del Carmen

2014-01-01

A subtidal meiofaunal assemblage in Los Cristianos Bay, Tenerife, Canary Islands was sampled from May 2000 to April 2001, at 3 m depth. Nematodes dominated overwhelmingly during the study period, ranging from 84.52% in May 2000 to 95.93% in October 2000. Copepods and polychaetes were the second and the third most abundant groups, respectively. Meiofaunal densities showed significant differences throughout the study period, with minimum abundances during the spring-summer months (May-July) and...

Extinction of endemic vertebrates on islands : The case of the giant rat Canariomys bravoi (Mammalia, Rodentia) on Tenerife (Canary Islands, Spain)

NARCIS (Netherlands)

Bocherens, Herve; Michaux, Jacques; Talavera, Francisco Garcia; Van der Plicht, Johannes

2006-01-01

Fossil bone collagen (14)C dating and delta(13)C and delta(15)N isotopic measurements of the rodent Canariomys bravoi from Tenerife (Canary Islands.. Spain) were used to test two different hypotheses about the causes of extinctions of endemic vertebrates on islands. climate versus humans. For the

Parasites of Columba livia (Aves: Columbiformes in Tenerife (Canary Islands and their role in the conservation biology of the Laurel pigeons

Directory of Open Access Journals (Sweden)

Foronda P.

2004-09-01

Full Text Available The prevalence and intensity of the parasites from 50 wild doves (Columba livia from the city of Santa Cruz de Tenerife, in the island of Tenerife (Canary Archipelago, were studied. The following ectoparasites were found in apparently healthy pigeons (prevalences are shown in percentage (% and mean intensities with their standard deviations: the acari Dermanyssus gallinae (De Geer, 1778 (6 241 .0 ± 138.9 and Tinaminyssus melloi Fain, 1962 (10 %, 218.3 ± 117.3; the louses, Columbicola columbae Linnaeus, 1758 (100 %, 111.4 ± 76.8 and Campanulotes bidentatus Scopoli, 1763 (94 %, 48.4 ± 26.6; and the pigeon fly, Pseudolynchia canariensis Macquart, 1839 (36 %, 6.2 ± 1.6. The endoparasites we found, were: a haemoprotozoan species, Haemoproteus columbae Kruze, 1890 (82 %, 14.8 ± 10.3 per 1000; coccidian oocysts, Eimeria sp. (50 %, 0.2 x 103 ± 1.7 x 103 per gr; a cestode species Raillietina micracantha (Fuhrmann, 1909 López Neyra, 1947 (44 %, 12.3 ± 9.4; and four nematode species, Tetrameres (Tetrameres fissispina (Diesing, 1861 Travassos, 1915 (4 %, 99.5 ± 34,1, Synhimantus (Dispharynx spiralis (Molin, 1858 (8 %, 46. 8 ± 11.6, Ascaridia columbae (Gmelin, 1790 Travassos, 1913 (40 %, 8.4 ± 8.8 and Aonchotheca sp. (18 %, 6.0 ± 3.1. Several species detected in our study can be pathogens for C. bollii and C. junoniae, which are endemic pigeons of the Canary Islands, considered endangered species. Parasites (ectoparasites, protozoa and helminths of C. livia found in Tenerife and others from wild and farm birds in the island were considered as healthy controls.

Radioactive content in groundwater in the island of Tenerife (Canary Islands); Contenido radioactivo en aguas en aguas subterraneas de la Isla de Tenerifie (Canarias)

Energy Technology Data Exchange (ETDEWEB)

Lopez-Perez, M.; Duarte-Rodriguez, X.; Rodriguez-Perestelo, N.; Catalan-Acosta, A.; Fernandez- De Aldecoa, J. C.; Hernandez Armas, J.

2013-07-01

At present the groundwater in Tenerife is still the main resource to meet the demands of all kinds. Currently, due to the salt content, groundwater is treated using reversible electrodialysis desalination systems before drinking it. (Author)

Check-list of interstitial polychaetes from intertidal and shallow subtidal soft bottoms of Tenerife, Canary Islands

OpenAIRE

Riera, Rodrigo; Núñez, Jorge; Carmen Brito, María del

2010-01-01

A check-list of polychaete species from two stations on the south coast of Tenerife (Los Abrigos and Los Cristianos) at two different tidal levels, intertidal and shallow subtidal (3 m depth) is presented. A total of 47 species were collected, the hesionid Microphthalmus pseudoaberrans Campoy & Viéitez, 1982 and the spionids Rhynchospio glutaea (Ehlers, 1897) and Spio filicornis (O.F. Müller, 1776) being the most abundant. With 18 species the family Syllidae is the most diverse, followed b...

Final Report Inspection of Aged/Degraded Containments Program.

Energy Technology Data Exchange (ETDEWEB)

Naus, Dan J [ORNL; Ellingwood, B R [Georgia Institute of Technology; Oland, C Barry [ORNL

2005-09-01

The Inspection of Aged/Degraded Containments Program had primary objectives of (1) understanding the significant factors relating corrosion occurrence, efficacy of inspection, and structural capacity reduction of steel containments and liners of reinforced concrete containments; (2) providing the United States Nuclear Regulatory Commission (USNRC) reviewers a means of establishing current structural capacity margins or estimating future residual structural capacity margins for steel containments, and concrete containments as limited by liner integrity; (3) providing recommendations, as appropriate, on information to be requested of licensees for guidance that could be utilized by USNRC reviewers in assessing the seriousness of reported incidences of containment degradation; and (4) providing technical assistance to the USNRC (as requested) related to concrete technology. Primary program accomplishments have included development of a degradation assessment methodology; reviews of techniques and methods for inspection and repair of containment metallic pressure boundaries; evaluation of high-frequency acoustic imaging, magnetostrictive sensor, electromagnetic acoustic transducer, and multimode guided plate wave technologies for inspection of inaccessible regions of containment metallic pressure boundaries; development of a continuum damage mechanics-based approach for structural deterioration; establishment of a methodology for reliability-based condition assessments of steel containments and liners; and fragility assessments of steel containments with localized corrosion. In addition, data and information assembled under this program has been transferred to the technical community through review meetings and briefings, national and international conference participation, technical committee involvement, and publications of reports and journal articles. Appendix A provides a listing of program reports, papers, and publications; and Appendix B contains a listing of

Concrete containment integrity program at EPRI

International Nuclear Information System (INIS)

Winkleblack, R.K.; Tang, Y.K.

1984-01-01

Many in the nuclear power plant business believe that the catastrophic failure mode for reactor containment structures is unrealistic. One of the goals of the EPRI containment integrity program is to demonstrate that this is true. The objective of the program is to provide the utility industry with an experimental data base and a test-validated analytical method for realistically evaluating the actual over-pressure capability of concrete containment buildings and to predict leakage behavior if higher pressures were to occur. The ultimate goal of this research effort is to characterize the containment leakage mode and rate as a function of internal pressure and time so that the risk can be realistically assessed for hypothetical degraded core accidents. Progress in the first and second phases of the three-phase analytical and testing efforts is discussed

Photosynthetic response and zonation of three species of Gelidiales from Tenerife, Canary Islands

Directory of Open Access Journals (Sweden)

Domíguez-Álvarez, S.

2011-06-01

Full Text Available Three species of Gelidiales (Gelidium arbuscula, Gelidium canariense and Pterocladiella capillacea (Rhodophyta were selected due to their abundance in the marine lower intertidal of the north coast of the island of Tenerife (Canary Islands, to assess, using PAM fluorescence, the importance of irradiance and exposure to air on vertical distribution. We compared tolerance to emersion by air-drying fronds under simulated emersion, and results suggest that recovery of photosynthesis after emersion plays a major role in the vertical distribution of these three species. Morphological traits such as clumped fronds explain the higher tolerances, and reduced water loss of the species upper on the shore. Local differences between sites may be related to slight differences in the light regime related to topography.

Se han seleccionado tres especies de Gelidiales (Gelidium arbuscula, Gelidium canariense y Pterocladiella capillacea que son abundantes en los niveles inferiores del intermareal de la costa N de Tenerife para establecer, utilizando fluorescencia tipo PAM, la importancia de la cantidad de luz y la exposición al aire en su zonación vertical. Se ha comparado la tolerancia a la emersión en frondes expuestas al aire, y los resultados sugieren que la capacidad de recuperación de la fotosíntesis tras la emersión tiene un papel fundamental en la explicación de la posición vertical de estas tres especies. Además, características morfológicas como el apelotonamiento de las frondes pueden coadyuvar a la mayor tolerancia, al reducir la pérdida de agua en emersión en las especies de niveles más altos. Las variaciones entre sitios se pueden deber a desigualdades locales en la cantidad de luz provocadas por diferencias topográficas.

Spatial and temporal variations of diffuse CO_{2} degassing at the N-S volcanic rift-zone of Tenerife (Canary Islands, Spain) during 2002-2015 period

Science.gov (United States)

Alonso, Mar; Ingman, Dylan; Alexander, Scott; Barrancos, José; Rodríguez, Fátima; Melián, Gladys; Pérez, Nemesio M.

2016-04-01

Tenerife is the largest of the Canary Islands and, together with Gran Canaria Island, is the only one with a central volcanic complex that started to grow at about 3.5 Ma. Nowadays the central complex is formed by Las Cañadas caldera, a volcanic depression measuring 16×9 km that resulted from multiple vertical collapses and was partially filled by post-caldera volcanic products. Up to 297 mafic monogenetic cones have been recognized on Tenerife, and they represent the most common eruptive activity occurring on the island during the last 1 Ma (Dóniz et al., 2008). Most of the monogenetic cones are aligned following a triple junction-shaped rift system, as result of inflation produced by the concentration of emission vents and dykes in bands at 120o to one another as a result of minimum stress fracturing of the crust by a mantle upwelling. The main structural characteristic of the southern volcanic rift (N-S) of the island is an apparent absence of a distinct ridge, and a fan shaped distribution of monogenetic cones. Four main volcanic successions in the southern volcanic rift zone of Tenerife, temporally separated by longer periods (˜70 - 250 ka) without volcanic activity, have been identified (Kröchert and Buchner, 2008). Since there are currently no visible gas emissions at the N-S rift, diffuse degassing surveys have become an important geochemical tool for the surveillance of this volcanic system. We report here the last results of diffuse CO2 efflux survey at the N-S rift of Tenerife, performed using the accumulation chamber method in the summer period of 2015. The objectives of the surveys were: (i) to constrain the total CO2 output from the studied area and (ii) to evaluate occasional CO2 efflux surveys as a volcanic surveillance tool for the N-S rift of Tenerife. Soil CO2 efflux values ranged from non-detectable up to 31.7 g m-2 d-1. A spatial distribution map, constructed following the sequential Gaussian simulation (sGs) procedure, did not show an

Cycles of selected elements in the frame of Globalization and Global Change in the environment of Tenerife (Canary Islands, Spain)

Science.gov (United States)

Heidak, Markus O.; Glasmacher, Ulrich A.; Schöler, Heinfried; Trieloff, Mario; Kober, Bernd

2010-05-01

The Laurel Forest is an important and sensitive ecosystem with particular element cycling mechanisms. On Tenerife the distribution is straitened to some parts in the north, north-west and northeast. The NE trade wind ensures a permanently humid climate in the north. Major urban and industrial development is centred on Tenerife, and as a touristy hotspot the Island is exposed to heavy air traffic. Furthermore, the short distance to the African coastline and, therefore, to the Sahara, contribute a regular influence of African Dust emissions. In summary, Laurel Forest is exposed to different climatic conditions, variations in lithology and soils, and aerosols caused by local anthropogenic emissions, Saharan dust, and sea spray. The present study aims to understand geogenic and anthropogenic element transports of K, P, N, and organic components between soils and Laurel Forest. In addition, the element contribution from the aerosols such as the Sahara dust has to be quantified to understand the rock - soil - vegetation coupling system. The Sahara dust as one of the important aerosols has been studied by various researchers (Bustos et al., 1998; Rodrıguez, 1999; Torres et al., 2001; Viana et al., 2002). Viana et al.,(2002) quantified the impacts of African dust outbreaks for Tenerife and Gran Canaria, after the interpretation of the PM10 (thoracis particulate matter) from nineteen air quality monitoring stations. Three types of African dust contributions were identified and characterized (winter, summer and autumn-winter dust outbreaks). Collected samples with and without African dust influence proved that: (a) for the intensive winter African dust outbreaks (daily PM10 levels up to 191 mg/m3) at least 76% of the bulk PM10 levels may be attributable to dust load, whereas the anthropogenic input accounts for only 3-14% and (b) SiO2, Al2O3, Ca, K, Fe, Ti, V, Mn and Ba concentrations are excellent tracers of African origin (Viana et al., 2002).

Radon Exposures in the Caves of Tenerife (Canary Islands)

International Nuclear Information System (INIS)

Pinza-Molina, C.; Alcaide, J.M.; Rodriques-Bethencourt, R.; Hernandez-Armas, J.

1999-01-01

There are more than a hundred volcanic caves and pits of various lengths on the island of Tenerife (Canary Islands, Spain). The results are presented of atmospheric radon measurements performed in three of these caves and in three pits. One of the caves selected, El Viento Cave, is nearly 20 km in length and is the longest volcanic tube in the Canarian archipelago and the second longest in the world. The measurements were performed over two distinct periods during the year using passive polycarbonate detectors. The mean radon concentrations range between 0.3 and 8 kBq.m -3 , the maximum value corresponds to a site located at 1850 m from the mouth of El Viento Cave. Possible touristic development of these caves has been taken into account in estimating the effective doses for visitors and guides (considered separately). The values obtained range from 0.3 to 100 μSv per visit for visitors. The largest effective dose would correspond to that for guides at 41 mSv.y -1 in the Viento Cave. This result would make protection against radiological hazards obligatory if the cave were to be developed as a site for tourism. (author)

Volcanic and geochemical evolution of the Teno massif, Tenerife, Canary Islands: some repercussions of giant landslides on ocean island magmatism

OpenAIRE

Longpré, Marc-Antoine; Troll, Valentin R.; Walter, Thomas R.; Hansteen, Thor H.

2009-01-01

Large-scale, catastrophic mass wasting is a major process contributing to the dismantling of oceanic intraplate volcanoes. Recent studies, however, have highlighted a possible feedback relationship between flank collapse, or incipient instability, and subsequent episodes of structural rearrangement and/or renewed volcano growth. The Teno massif, located in northwestern Tenerife (Canary Islands), is a deeply eroded Miocene shield volcano that was built in four major eruptive phases punctuated ...

Automatic earthquake detection and classification with continuous hidden Markov models: a possible tool for monitoring Las Canadas caldera in Tenerife

Energy Technology Data Exchange (ETDEWEB)

Beyreuther, Moritz; Wassermann, Joachim [Department of Earth and Environmental Sciences (Geophys. Observatory), Ludwig Maximilians Universitaet Muenchen, D-80333 (Germany); Carniel, Roberto [Dipartimento di Georisorse e Territorio Universitat Degli Studi di Udine, I-33100 (Italy)], E-mail: roberto.carniel@uniud.it

2008-10-01

A possible interaction of (volcano-) tectonic earthquakes with the continuous seismic noise recorded in the volcanic island of Tenerife was recently suggested, but existing catalogues seem to be far from being self consistent, calling for the development of automatic detection and classification algorithms. In this work we propose the adoption of a methodology based on Hidden Markov Models (HMMs), widely used already in other fields, such as speech classification.

Tipo de cultivos y procesos de escorrentía en Las Llanadas, Los Realejos (Tenerife, España

Directory of Open Access Journals (Sweden)

Francisco Javier Dóniz Páez

2014-02-01

Full Text Available Este artículo analiza 16 cárcavas efímeras en campos de cultivo en el norte de Tenerife (Las Llanadastras lluvias intensas caídas en noviembre de 2009. Se estudiaron “gullies” en parcelas con diferentestipos de cultivo: maíz, cereal, papas y sin cultivo. Se observó que las cárcavas presentan diferenciasmorfológicas y de tamaño en relación con el tipo de cultivo sobre el que se han generado, por lo quelas parcelas con maíz son más vulnerables a los procesos de erosión, mientras que la de cereal son lasmenos. Sin embargo, también se aprecia que la desaparición de elementos tradicionales en los camposde cultivo (zanjas, muros de piedras, etc. son los máximos responsables de la formación y la mayorincidencia de las cárcavas por lluvias torrenciales. Por tanto, es necesario que los agricultores vuelvana recuperar, y así se ha constatado, los elementos tradicionales que progresivamente han ido desapareciendode los campos de cultivo.In this work 16 ephemeral gullies of the north of Tenerife (Las Llanadas are studied. These gullies arelocated in agricultural land (corn, cereal, potatoes and without cultivations and they were formedfor torrential rains. The gullies possesses different size and morphologies according to cultivationstype. However, the elimination of traditional elements in the agricultural fields, they have provokedbigger effect of the torrential rains.

The thirty gigahertz instrument receiver for the Q-U-I Joint Tenerife experiment: Concept and experimental results

Energy Technology Data Exchange (ETDEWEB)

Villa, Enrique, E-mail: villae@unican.es; Cano, Juan L.; Cagigas, Jaime; Pérez, Ana R.; Aja, Beatriz; Terán, J. Vicente; Fuente, Luisa de la; Artal, Eduardo; Mediavilla, Ángel [Departamento Ingeniería de Comunicaciones, Universidad de Cantabria, Plaza de la Ciencia s/n, Santander 39005 (Spain); Ortiz, David; Casas, Francisco J. [Instituto de Física de Cantabria, Avda. Los Castros s/n, Santander 39005 (Spain); Hoyland, Roger [Instituto de Astrofísica de Canarias, Vía Láctea s/n, La Laguna 38205 (Spain)

2015-02-15

This paper presents the analysis, design, and characterization of the thirty gigahertz instrument receiver developed for the Q-U-I Joint Tenerife experiment. The receiver is aimed to obtain polarization data of the cosmic microwave background radiation from the sky, obtaining the Q, U, and I Stokes parameters of the incoming signal simultaneously. A comprehensive analysis of the theory behind the proposed receiver is presented for a linearly polarized input signal, and the functionality tests have demonstrated adequate results in terms of Stokes parameters, which validate the concept of the receiver based on electronic phase switching.

The thirty gigahertz instrument receiver for the Q-U-I Joint Tenerife experiment: Concept and experimental results

International Nuclear Information System (INIS)

Villa, Enrique; Cano, Juan L.; Cagigas, Jaime; Pérez, Ana R.; Aja, Beatriz; Terán, J. Vicente; Fuente, Luisa de la; Artal, Eduardo; Mediavilla, Ángel; Ortiz, David; Casas, Francisco J.; Hoyland, Roger

2015-01-01

This paper presents the analysis, design, and characterization of the thirty gigahertz instrument receiver developed for the Q-U-I Joint Tenerife experiment. The receiver is aimed to obtain polarization data of the cosmic microwave background radiation from the sky, obtaining the Q, U, and I Stokes parameters of the incoming signal simultaneously. A comprehensive analysis of the theory behind the proposed receiver is presented for a linearly polarized input signal, and the functionality tests have demonstrated adequate results in terms of Stokes parameters, which validate the concept of the receiver based on electronic phase switching

A PC-based computer program for simulation of containment pressurization

International Nuclear Information System (INIS)

Seifaee, F.

1990-01-01

This paper reports that a PC-based computer program has been developed to simulate a pressurized water reactor (PWR) containment during various transients. This containment model is capable of determining pressure and temperature history of a PWR containment in the event of a loss of coolant accident, as well as main steam line breaks inside the containment. Conservation of mass and energy equations are applied to the containment model. Development of the program is based on minimization of input specified information and user friendliness. Maximization of calculation efficiency is obtained by superseding the traditional trial and error procedure for determination of the state variables and implementation of an explicit solution for pressure. The program includes simplified models for active heat removal systems. The results are in close agreement between the present model and CONTEMPT-MOD5 computer code for pressure and temperature inside the containment

The impact of training in solution-focused brief therapy on professional beliefs, practices and burnout of child protection workers in Tenerife island

OpenAIRE

Medina Machín, Antonio; Beyebach, Mark

2014-01-01

This paper presents the first results of a large-scale research project on the child protection services in Tenerife, Spain. In Study 1, the professional beliefs and practices of 152 child protection workers, as measured by a Professional Beliefs and Practices Questionnaire (Medina & Beyebach, 2010), were correlated with their scores on the Maslach Burnout Inventory (Maslach, Jackson, & Leiter, 1996). Higher scores in a variety of deficit-based beliefs and practices were associated with highe...

Geochemical study of two obsidian production centers in the Prehistory of Tenerife: El Tabonal de los Guanches (Icod de los Vinos and el Tabonal Negro (Las Cañadas

Directory of Open Access Journals (Sweden)

Hernández Gómez, Cristo M.

2008-12-01

Full Text Available The obsidian production is one of the work processes that allow a good characterization of the Guanches, first inhabitants of Tenerife (Canary Islands. On this occasion, addresses the geochemical study of the volcanic flows where the main obsidian sources of the Aboriginal of Tenerife are located: The Tabonal de Los Guanches (Icod de Los Vinos and the Tabonal Negro, Mña. Blanca (Las Cañadas del Teide characterized as Production Centres. The aim is to establish the compositional differences between the two in order to trace the distribution of their lithic productions in the island territory and recognize the pattern of supply that was put into practice.

La producción obsidiánica es uno de los procesos de trabajo que mejor permite la caracterización social de los guanches, primeros habitantes de Tenerife (Canarias. En esta ocasión se aborda el estudio geoquímico de las coladas en las que se ubican sus principales fuentes de aprovisionamiento de obsidiana: El Tabonal de Los Guanches (Icod de los Vinos y El Tabonal Negro en Mña. Blanca (Las Cañadas del Teide, consideradas desde el punto de vista arqueológico como Centros de Producción. El objetivo es establecer las diferencias composicionales entre ambas para poder rastrear la distribución de sus respectivas producciones líticas en el territorio insular y reconocer el modelo de suministro que se puso en práctica.

Advanced containment research for the Canadian Nuclear Fuel Waste Management Program

International Nuclear Information System (INIS)

Onofrei, M.; Mathew, P.M.; McKay, P.; Hosaluk, L.J.; Oscarson, D.W.

1986-09-01

This document outlines the program on the development of advanced containment systems for the disposal of used fuel in a vault deep in plutonic rock. Possible advanced containment concepts, the strategy adopted in selecting potential container materials, and experimental programs currently underway or planned are presented. Most effort is currently directed toward developing long-term containment systems based on non-metallic materials and massive metal containers. The use of additional independent barriers to extend the lifetime of simple containment systems is also being evaluated. 58 refs

Advective and diapycnal diffusive oceanic flux in Tenerife - La Gomera Channel

Science.gov (United States)

Marrero-Díaz, A.; Rodriguez-Santana, A.; Hernández-Arencibia, M.; Machín, F.; García-Weil, L.

2012-04-01

During the year 2008, using the commercial passenger ship Volcán de Tauce of the Naviera Armas company several months, it was possible to obtain vertical profiles of temperature from expandable bathythermograph probes in eight stations across the Tenerife - La Gomera channel. With these data of temperature we have been estimated vertical sections of potential density and geostrophic transport with high spatial and temporal resolution (5 nm between stations, and one- two months between cruises). The seasonal variability obtained for the geostrophic transport in this channel shows important differences with others Canary Islands channels. From potential density and geostrophic velocity data we estimated the vertical diffusion coefficients and diapycnal diffusive fluxes, using a parameterization that depends of Richardson gradient number. In the center of the channel and close to La Gomera Island, we found higher values for these diffusive fluxes. Convergence and divergence of these fluxes requires further study so that we can draw conclusions about its impact on the distribution of nutrients in the study area and its impact in marine ecosystems. This work is being used in research projects TRAMIC and PROMECA.

Soil CO2 efflux measurement network by means of closed static chambers to monitor volcanic activity at Tenerife, Canary Islands

Science.gov (United States)

Amonte, Cecilia; García-Merino, Marta; Asensio-Ramos, María; Melián, Gladys; García-Hernández, Rubén; Pérez, Aaron; Hernández, Pedro A.; Pérez, Nemesio M.

2017-04-01

Tenerife (2304 km2) is the largest of the Canary Islands and has developed a central volcanic complex (Cañadas edifice), that started to grow about 3.5 My ago. Coeval with the construction of the Cañadas edifice, shield basaltic volcanism continued until the present along three rift zones oriented NW-SE, NE-SW and NS (hereinafter referred as NW, NE and NS respectively). Main volcanic historical activity has occurred along de NW and NE rift-zones, although summit cone of Teide volcano, in central volcanic complex, is the only area of the island where surface geothermal manifestations are visible. Uprising of deep-seated gases occurs along the aforementioned volcanic structures causing diffuse emissions at the surface environment of the rift-zones. In the last 20 years, there has been considerable interest in the study of diffuse degassing as a powerful tool in volcano monitoring programs. Diffuse degassing studies are even more important volcanic surveillance tool at those volcanic areas where visible manifestations of volcanic gases are absent. Historically, soil gas and diffuse degassing surveys in volcanic environments have focused mainly on CO2 because it is, after water vapor, the most abundant gas dissolved in magma. One of the most popular methods used to determine CO2 fluxes in soil sciences is based on the absorption of CO2 through an alkaline medium, in its solid or liquid form, followed by gravimetric, conductivity, or titration analyses. In the summer of 2016, a network of 31 closed static chambers was installed, covering the three main structural zones of Tenerife (NE, NW and NS) as well as Cañadas Caldera with volcanic surveillance porpoises. 50 cc of 0.1N KOH solution is placed inside the chamber to absorb the CO2 released from the soil. The solution is replaced weekly and the trapped CO2 is then analyzed at the laboratory by titration. The are expressed as weekly integrated CO2 efflux values. The CO2 efflux values ranged from 3.2 to 12.9 gṡm-2�

La Universidad de La Laguna en la construcción territorial de la conurbación capitalina de Tenerife

Directory of Open Access Journals (Sweden)

Vicente Manuel Zapata Hernández

2007-11-01

Este trabajo se plantea como un ejercicio de reflexión acerca del papel que ha desempeñado la Universidad en la construcción territorial de la conurbación capitalina de Tenerife, asunto que puede ser objeto de investigaciones posteriores realizadas con mayor profundidad, enfatizando las características de la relación que se produce entre el centro superior y la ciudad. Esta primera aproximación presenta una perspectiva crítica, pero también propositiva, basado en que la Universidad constituye un extraordinario recurso y factor de desarrollo local.

Investigation program on PWR-steel-containment behavior under accident conditions

International Nuclear Information System (INIS)

Krieg, R.; Eberle, F.; Goeller, B.; Gulden, W.; Kadlec, J.; Messemer, G.; Mueller, S.; Wolf, E.

1983-10-01

This report is a first documentation of the KfK/PNS activities and plans to investigate the behaviour of steel containments under accident conditions. The investigations will deal with a free standing spherical containment shell built for the latest type of a German pressurized water reactor. The diameter of the containment shell is 56 m. The minimum wall thickness is 38 mm. The material used is the ferritic steel 15MnNi63. According to the actual planning the program is concerned with four different problems which are beyond the common design and licensing practice: Containment behavior under quasi-static pressure increase up to containment failure. Containment behavior under high transient pressures. Containment oscillations due to earthquake loadings; consideration of shell imperfections. Containment buckling due to earthquake loadings. The investigation program consists of both theoretical and experimental activities including membrane tests allowing for very high plastic strains and oscillation tests with a thin-walled, high-accurate spherical shell. (orig.) [de

Ozonization of reclaimed wastewater and effects on particulate matter and disinfection. Reuse perspectives for irrigation in Tenerife (Spain); Ozonizacion del agua residual depurada y sus efectos sobre la materia particulada y desinfeccion. Perspectivas para su posterior uso en el riego agricola en Tenerife

Energy Technology Data Exchange (ETDEWEB)

Rodriguez Gomez, L. E.; Diaz Gonzalez, F.; Abreu Acosta, N.; Martin Delgado, M.; Aguilar Gonzalez, E.

2006-07-01

In this work a study on the feasibility of ozonization as a disinfection and organic matter removal method was carried out on reclaimed wastewater for crop irrigation in the South of Tenerife. three different O{sub 3} doses were applied to reclaimed wastewater: 10, 15 and 20 g/m''3. The highest total suspended solids (TSS) removal obtained was 44%, with both 15 and 20 mg/l O{sub 3}. However, a direct relationship between the O{sub 3} dose applied and the reduction of faecal coliforms has been found, achieving a complete removal with the O{sub 3} dose of 20 mg/l. (Author) 17 refs.

MAVL wastes containers functional demonstration and associated tests program

International Nuclear Information System (INIS)

Templier, J.C.

2002-01-01

In the framework of studies on the MAVL wastes, the CEA develops containers for middle time wastes storage. This program aims to realize a ''B wastes containers'' demonstrator. A demonstrator is a container, parts of a container or samples which must validate the tests. This document presents the state of the study in the following three chapters: functions description, base data and design choices; presentation of the functional demonstrators; demonstration tests description. (A.L.B.)

Event recognition by detrended fluctuation analysis: An application to Teide-Pico Viejo volcanic complex, Tenerife, Spain

International Nuclear Information System (INIS)

Del Pin, Enrico; Carniel, Roberto; Tarraga, Marta

2008-01-01

In this work we investigate the application of the detrended fluctuation analysis (DFA) to seismic data recorded in the island of Tenerife (Canary Islands, Spain) during the month of July 2004, in a phase of possible unrest of the Teide-Pico Viejo volcanic complex. Tectonic events recorded in the area are recognized and located by the Spanish national agency Instituto Geografico Nacional (IGN) and their catalogue is the only currently available dataset, whose completeness unfortunately suffers from the strong presence of anthropogenic noise. In this paper we propose the use of DFA to help to automatically identify events. The evaluation of this case study proves DFA to be a promising tool to be used for rapidly screening large seismic datasets and highlighting time windows with the potential presence of discrete events

Reproductive phenology of three species of Gelidiales (Rhodophyta in two macroalgal communities from Tenerife (Atlantic Ocean, Canary Islands, Spain

Directory of Open Access Journals (Sweden)

Polifrone, Milena

2012-12-01

Full Text Available The reproductive phenology of three species of Gelidiales, Gelidium canariense, Gelidium arbuscula and Pterocladiella capillacea, was analysed seasonally for a period of one year in two localities on the West coast of Tenerife (Atlantic Ocean, Canary Islands, Spain. Considerations are provided on sex ratio, maximum length and branch order of uprights and on the length of the thalli for each sexual and asexual phase of the Canary Islands populations. The three species were characterized by a high percentage of tetrasporophytes, while female and male gametophytes have been observed only in little proportion. Only G. canariense showed gametophytes in all seasons while the occurrence of gametophytes in G. arbuscula and Pterocladiella capillacea demonstrated a clear seasonality.

La fenología reproductiva de tres especies de Gelidiales, Gelidium canariense, Gelidium arbuscula y Pterocladiella capillacea, ha sido analizada estacionalmente por un periodo de un año en dos localidades de la costa este de Tenerife (Oceano Atlántico, Islas Canarias, España. Se realizan consideraciones sobre sex ratio, longitud máxima y orden de ramificación de los ramets y se aporta información sobre la longitud del talo por cada fase sexual y asexual de las poblaciones canarias. Las tres especies se caracterizan por presentar un elevado porcentaje de tetrasporofitos, mientras que los gametofitos masculinos y femeninos han sido observados en proporciones reducidas. Sólo G. canariense presenta gametofitos en todas las estaciones, mientras que en G. arbuscula y Pterocladiella capillacea demostraban una clara estacionalidad.

Mark I containment, short term program. Safety evaluation report

International Nuclear Information System (INIS)

1977-12-01

Presented is a Safety Evaluation Report (SER) prepared by the Office of Nuclear Reactor Regulation addressing the Short Term Program (STP) reassessment of the containment systems of operating Boiler Water Reactor (BWR) facilities with the Mark I containment system design. The information presented in this SER establishes the basis for the NRC staff's conclusion that licensed Mark I BWR facilities can continue to operate safely, without undue risk to the health and safety of the public, during an interim period of approximately two years while a methodical, comprehensive Long Term Program (LTP) is conducted. This SER also provides one of the basic foundations for the NRC staff review of the Mark I containment systems for facilities not yet licensed for operation

CONTEMPT4/MOD6: a multicompartment containment system analysis program

International Nuclear Information System (INIS)

Lin, C.C.; Economos, C.; Lehner, J.R.; Maise, G.

1986-03-01

CONTEMPT4/MOD6 is a digital computer program that describes the response of multicompartment containment system subjected to postulated loss-of-coolant accident (LOCA) conditions. The program is written in FORTRAN IV and can accomodate both pressurized water reactor (PWR) and boiling water reactor (BWR) containment systems. Also, both design basis accident (DBA) and degraded core type LOCA conditions can be analyzed. The program calculates the time variation of compartment pressures, temperatures and mass and energy inventories due to intercompartment mass and energy exchange taking into account user supplied descriptions of compartments, intercompartment junction flow areas, LOCA source terms and user selected problem features. Analytical models available to describe containment systems include models for containment fans and pumps, cooling sprays, heat conducting structures, sump drains, PWR ice condensers and BWR pressure suppression systems. To accommodate degraded core type accidents, analytical models for hydrogen and carbon monoxide combustion within compartments and energy transfer due to gas radiation are also provided. Dynamic storage allocation (DSA) is used to limit the amount of computer core used for each problem. The flexibility needed to more realistically model the complexity of prototypical containments is provided by the multicompartment capability (up to 999 individual compartments) and generalized user oriented input data descriptions. The program employs an implicit algorithm to compute junction flow when numerically induced flow oscillations are encountered. This capability provides significant reduction of computer run time relative to previous codes in the CONTEMPT series. Descriptions of these analytical models are presented, together with input instructions for the CONTEMPT4/MOD6 program and sample problem results. 23 refs., 62 figs

Status of the LWR aerosol containment experiments (LACE) program

International Nuclear Information System (INIS)

Bloom, G.R.; Dickinson, D.R.; Hilliard, R.K.; McCormack, J.D.; Muhlestein, L.D.; Rahn, F.J.

1985-01-01

The LACE program, sponsored by an international consortium, is investigating inherent aerosol behavior for three postulated high consequence accident sequences; the containment bypass or V-sequence, failure to isolate containment, and delayed containment failure. Six large-scale tests are described which focus on these accident situations and which will be completed in the Containment Systems Test Facility at the Hanford Engineering Development Laboratory. The aerosol generation systems used to generate soluble and insoluble aerosols for the large-scale tests are described. The report then focuses on those tests which deal with the containment bypass accident sequence. Test results are presented and discussed for three containment bypass scoping tests

Containment Leakage Rate Testing Program in NPP Krsko

International Nuclear Information System (INIS)

Dudas, M.; Heruc, Z.

2002-01-01

NPP Krsko adopted new regulations for testing of the reactor building containment as stipulated by 10CFR50 (Code of Federal Regulation) Appendix J, Option B instead of the previous requirement 10CFR50 Appendix J now renamed to 10CFR50 Appendix J, Option A. In the USA a thorough analyses of nuclear power plants reactor building containment testing was conducted. As part of these analyses the test results obtained from testing of various reactor-building containments in the last ten years were reviewed. It was concluded that it would be meaningful to, based on test results historical data, reconsider possibility of redefining testing intervals. The official proposal of such approach was reviewed and approved by the NRC and published in September of 1995 in the FR Vol.60 No.186. Based on directions from 10CFR50 Appendix J, Option B, the new criteria for definition of test intervals were created. Criteria were based upon past performance during testing (Performance-based Requirements) and safety impact. At NPP Krsko, the analyses of the Reactor Building Containment. Integrity Test results was performed . This included test results of the Containment Integrated Leak Rate Testing (CILRT or Type A tests), Containment Isolation Valves Local Leak Rater Tests (Type C tests) and Mechanical and Electrical Penetrations Local Leak Rate tests (Type B tests). In accordance with instructions from NEI 94-01 and based on analyses of test results, NPP Krsko created Containment Leakage Rate Testing Program with the purpose to establish the performance-based definition of test intervals, inspection scope, trending and reporting. Equally, the program gives instructions how to evaluate test results and how to deal with the containment penetration or isolation valve repair contingency. All changes caused with transition from Option A to Option B are marginal to public safety. (author)

LWR aerosol containment experiments (LACE) program and initial test results

International Nuclear Information System (INIS)

Muhlestein, L.D.; Hilliard, R.K.; Bloom, G.R.; McCormack, J.D.; Rahn, F.J.

1985-01-01

The LWR aerosol containment experiments (LACE) program is described. The LACE program is being performed at the Hanford Engineer Development Laboratory (operated by Westinghouse Hanford Company) and the initial tests are sponsored by EPRI. The objectives of the LACE program are: to demonstrate, at large-scale, inherent radioactive aerosol retention behavior for postulated high consequence LWR accident situations; and to provide a data base to be used for aerosol behavior . Test results from the first phase of the LACE program are presented and discussed. Three large-scale scoping tests, simulating a containment bypass accident sequence, demonstrated the extent of agglomeration and deposition of aerosols occurring in the pipe pathway and vented auxiliary building under realistic accident conditions. Parameters varied during the scoping tests were aerosol type and steam condensation

Containment integrity research program plan

International Nuclear Information System (INIS)

1987-08-01

This report presents a plan for research on the question of containment performance in postulated severe accident scenarios. It focuses on the research being performed by the Structural and Seismic Engineering Branch, Division of Engineering, Office of Nuclear Regulatory Research. Summaries of the plans for this work have previously been published in the ''Nuclear Power Plant Severe Accident Research Plan'' (NUREG-0900). This report provides an update to reflect current status. This plan provides a summary of results to date as well as an outline of planned activities and milestones to the contemplated completion of the program in FY 1989

A GIS-based methodology for the estimation of potential volcanic damage and its application to Tenerife Island, Spain

Science.gov (United States)

Scaini, C.; Felpeto, A.; Martí, J.; Carniel, R.

2014-05-01

This paper presents a GIS-based methodology to estimate damages produced by volcanic eruptions. The methodology is constituted by four parts: definition and simulation of eruptive scenarios, exposure analysis, vulnerability assessment and estimation of expected damages. Multi-hazard eruptive scenarios are defined for the Teide-Pico Viejo active volcanic complex, and simulated through the VORIS tool. The exposure analysis identifies the elements exposed to the hazard at stake and focuses on the relevant assets for the study area. The vulnerability analysis is based on previous studies on the built environment and complemented with the analysis of transportation and urban infrastructures. Damage assessment is performed associating a qualitative damage rating to each combination of hazard and vulnerability. This operation consists in a GIS-based overlap, performed for each hazardous phenomenon considered and for each element. The methodology is then automated into a GIS-based tool using an ArcGIS® program. Given the eruptive scenarios and the characteristics of the exposed elements, the tool produces expected damage maps. The tool is applied to the Icod Valley (North of Tenerife Island) which is likely to be affected by volcanic phenomena in case of eruption from both the Teide-Pico Viejo volcanic complex and North-West basaltic rift. Results are thematic maps of vulnerability and damage that can be displayed at different levels of detail, depending on the user preferences. The aim of the tool is to facilitate territorial planning and risk management in active volcanic areas.

CNTB program for the analysis of partially mixed containment atmospheres during depressurization events

International Nuclear Information System (INIS)

Landoni, J.A.

1979-07-01

This program describes the analytical models for the CNTB computer program, which is permanently filed in the archive library of the General Atomic (GA) San Diego Data Center under reference number THSD-2699. Developed during the last four years, this computer program has been successfully applied in its presented form to the type of containment atmosphere transients illustrated in this report. For example, the CNTB computer program is applicable (1) to the design basis depressurization accident (DBDA) to determine the effect of the partial mixing on the containment atmospheric peak pressure (known as nonmixing penalty) and (2) for Class 9 accidents, such as the loss of forced circulation (LOFC), for the AIPA Phase I studies. The capability of the CNTB computer program has been substantially improved over its precursor, the CONTEMPT-G computer program, to predict the thermodynamic behavior of the containment atmosphere during helium releases, assuming partial mixing of the original air with the effluent and to predict the amount of the environmental leaks under closed and open containment conditions. In addition, the CNTB computer program running times are considerably below the ones required for the CONTEMPT-G computer program. Computational solution of the variable parameters in the containment atmosphere is effected by an iterative technique, while the temperatures for its boundaries are obtained by finite differences. The CNTB computer program, written in FORTRAN V, has been implemented at GA on the UNIVAC 1110 computer

The asbestos cement container and its characterization program

International Nuclear Information System (INIS)

Kertesz, C.; Oliver, J.; Jaouen, C.

1986-01-01

A new type of packing container is designed in France, by SGN, for the reprocessing wastes conditioning: the asbestos cement container (CAC) made by the industrial process for pipes fabrication. Two types of CAC are studied, differing from each other by their wall thickness. The technology of which SGN is in charge is presented. A characterization program is operated by CEA in view of satisfying to regulatory requirements. Emphasis is placed upon the radionuclides migration study, through different asbestos cement samples

Deformation in volcanic areas: a numerical approach for their prediction in Teide volcano (Tenerife, Canary Islands); Deformaciones en areas volcanicas: una aproximacin numerica para su prediccion en el volcan Teide (Tenerife, Islas Canarias)

Energy Technology Data Exchange (ETDEWEB)

Charco, M.; Galan del Sastre, P.

2011-07-01

Active volcanic areas study comprises both, observation of physical changes in the natural media and the interpretation of such changes. Nowadays, the application of spatial geodetic techniques, such as GPS (Global Positioning System) or InSAR (Interferometry with Synthetic Aperture Radar), for deformation understanding in volcanic areas, revolutionizes our view of this geodetic signals. Deformation of the Earth's surface reflects tectonic, magmatic and hydrothermal processes at depth. In this way, the prediction of volcanic deformation through physical modelling provides a link between the observation and depth interior processes that could be crucial for volcanic hazards assessment. In this work, we develop a numerical model for elastic deformation study. The Finite Element Method (FEM) is used for the implementation of the numerical model. FEM allows to take into account different morphology, structural characteristics and the mechanical heterogeneities of the medium. Numerical simulations of deformation in Tenerife (Canary Islands) taking into account different medium hypothesis allow us to conclude that the accuracy of the predictions depends on how well the natural system is described. (Author) 22 refs.

The potential pathogenicity of chlorhexidine-sensitive Acanthamoeba strains isolated from contact lens cases from asymptomatic individuals in Tenerife, Canary Islands, Spain.

Science.gov (United States)

Martín-Navarro, Carmen M; Lorenzo-Morales, Jacob; Cabrera-Serra, M Gabriela; Rancel, Fernando; Coronado-Alvarez, Nieves M; Piñero, José E; Valladares, Basilio

2008-11-01

Pathogenic strains of the genus Acanthamoeba are causative agents of a serious sight-threatening infection of the eye known as Acanthamoeba keratitis. The prevalence of this infection has risen in the past 20 years, mainly due to the increase in number of contact lens wearers. In this study, the prevalence of Acanthamoeba in a risk group constituted by asymptomatic contact lens wearers from Tenerife, Canary Islands, Spain, was evaluated. Contact lenses and contact lens cases were analysed for the presence of Acanthamoeba isolates. The isolates' genotypes were also determined after rDNA sequencing. The pathogenic potential of the isolated strains was subsequently established using previously described molecular and biochemical assays, which allowed the selection of three strains with high pathogenic potential. Furthermore, the sensitivity of these isolates against two standard drugs, ciprofloxacin and chlorhexidine, was analysed. As the three selected strains were sensitive to chlorhexidine, its activity and IC(50) were evaluated. Chlorhexidine was found to be active against these strains and the obtained IC(50) values were compared to the concentrations of this drug present in contact lens maintenance solutions. It was observed that the measured IC(50) was higher than the concentration found in these maintenance solutions. Therefore, the ineffectiveness of chlorhexidine-containing contact lens maintenance solutions against potentially pathogenic strains of Acanthamoeba is demonstrated in this study.

Temporal Variations of Shallow Subtidal Meiofauna in Los Cristianos Bay (Tenerife, Canary Islands, Ne Atlantic Ocean

Directory of Open Access Journals (Sweden)

Rodrigo Riera

2014-09-01

Full Text Available A subtidal meiofaunal assemblage in Los Cristianos Bay, Tenerife, Canary Islands was sampled from May 2000 to April 2001, at 3 m depth. Nematodes dominated overwhelmingly during the study period, ranging from 84.52% in May 2000 to 95.93% in October 2000. Copepods and polychaetes were the second and the third most abundant groups, respectively. Meiofaunal densities showed significant differences throughout the study period, with minimum abundances during the spring-summer months (May-July and highest densities in winter (January and February. This seasonality is mainly due to the temporal variations of the most abundant species (nematodes Daptonema hirsutum and Pomponema sedecima, with differences in meiofauna species composition and abundance during May and June 2000 as compared to the remaining months of the study period. Environmental variables partly explained meiofaunal community structure, being the sedimentary type of very fine sands the most important, jointly with other variables, such as nitrogen and organic matter content.

CONTEMPT4/MOD2: a multicompartment containment system analysis program

International Nuclear Information System (INIS)

Metcalfe, L.J.; Mings, W.J.; Hartman, J.E.; Crail, A.C.

1978-02-01

CONTEMPT4/MOD2 is a digital computer program, written in FORTRAN IV, which describes the behavior of multicompartment pressurized water reactor (PWR) containment systems and experimental containment systems subjected to postulated loss-of-coolant accident (LOCA) conditions. The program calculates the time variation of compartment pressures, temperatures, mass and energy inventories, heat structure temperature distributions, and intercompartment mass and energy exchange based on user-supplied values for compartment descriptions, time step and edit controls, and selected problem features. Analytical models available to describe containment systems include models for containment fans and pumps, cooling sprays, fan coolers, heat conducting structures, sump drain, and PWR ice condensers. Dynamic storage allocations (DSA) is used to limit the amount of computer core used for each problem. Optional automatic time step control allows the code to determine time step sizes within limits dictated by the user. Multicompartment capability (up to 999 individual compartments) and generalized, user-oriented input data descriptions permit improved flexibility over previous codes in the CONTEMPT series. Analytical model descriptions, input instructions, and sample problem results are presented

CONTEMPT 4/MOD 3: a multicompartment containment system analysis program

International Nuclear Information System (INIS)

Cheng, T.C.; Metcalfe, L.J.; Hartman, J.E.; Mings, W.J.; Crail, A.C.

1982-12-01

CONTEMPT4/MOD3 is a digital computer program, written in FORTRAN IV, that describes the behavior of multicompartment pressurized water reactor (PWR) containment systems and experimental containment systems subjected to postulated loss-of-coolant accident (LOCA) conditons. The program calculates the time variation of compartment pressures, temperatures, mass and energy inventories, heat structure temperature distributions, and intercompartment mass and energy exchange based on user-supplied values for compartment descriptions, time step and edit controls, and selected problem features. Analytical models available to describe containment systems include models for containment fans and pumps, cooling sprays, fan coolers, heat-conducting structures, sump drains, and PWR ice condensers. Dynamic stroage allocation (DSA) is used to limit the amount of computer core used for each problem. Optional automatic time step control allows the code to determine time step sizes within limits dictated by the user. Multicompartment capability (up to 999 individual compartments) and generalized, user-oriented input-data descriptions permit improved flexibility over previous codes in the CONTEMPT series. Analytical model descriptions, input instructions, and sample problem results are presented

CONTEMPT-G computer program and its application to HTGR containments

International Nuclear Information System (INIS)

Macnab, D.I.

1976-03-01

The CONTEMPT-G computer program has been developed by General Atomic Company to simulate the temperature-pressure response of a containment atmosphere to postulated depressurization of High-Temperature Gas-Cooled Reactor (HTGR) primary or secondary coolant circuits. The mathematical models currently used in the code are described, and applications of the code in examples of the atmospheric response of a representative containment to a variety of postulated HTGR accident conditions are presented. In particular, maximum containment temperature and pressure, equilibrated long-term prestressed concrete reactor vessel and containment pressures, and peak containment conditions following steam pipe ruptures are examined for a representative 770-MW(e) HTGR

Polarimetric receiver in the forty gigahertz band: new instrument for the Q-U-I joint Tenerife experiment

Science.gov (United States)

Villa, Enrique; Cano, Juan L.; Aja, Beatriz; Terán, J. Vicente; de la Fuente, Luisa; Mediavilla, Ángel; Artal, Eduardo

2018-03-01

This paper describes the analysis, design and characterization of a polarimetric receiver developed for covering the 35 to 47 GHz frequency band in the new instrument aimed at completing the ground-based Q-U-I Joint Tenerife Experiment. This experiment is designed to measure polarization in the Cosmic Microwave Background. The described high frequency instrument is a HEMT-based array composed of 29 pixels. A thorough analysis of the behaviour of the proposed receiver, based on electronic phase switching, is presented for a noise-like linearly polarized input signal, obtaining simultaneously I, Q and U Stokes parameters of the input signal. Wideband subsystems are designed, assembled and characterized for the polarimeter. Their performances are described showing appropriate results within the 35-to-47 GHz frequency band. Functionality tests are performed at room and cryogenic temperatures with adequate results for both temperature conditions, which validate the receiver concept and performance.

100 años del nacimiento de la Psicología Comparada en Tenerife (I): W. Köhler y la Casa Amarilla

OpenAIRE

Carlos J. Álvarez

2014-01-01

El presente artículo está motivado por la celebración de los 100 años del nacimiento de la psicología comparada actual y de la primatología en nuestro país. En 1913 Alemania instala en Tenerife la primera estación primatológica del mundo. Unos meses más tarde, en 1914, Wolfgang Köhler comienza allí sus experimentos sobre la cognición de los chimpancés y la resolución de problemas. Dichos trabajos dieron lugar a la consolidación (y nacimiento, para muchos) de la Psicología de la Gestalt, siend...

In Situ Remediation Integrated Program, Evaluation and assessment of containment technology

International Nuclear Information System (INIS)

Gerber, M.A.; Fayer, M.J.

1994-04-01

The In Situ Remediation Integrated Program (ISRIP) was established by the US Department of Energy (DOE) to advance the state-of-the art of innovative in situ remediation technologies to the point of demonstration and to broaden the applicability of these technologies to the widely varying site remediation requirements throughout the DOE complex. This program complements similar ongoing integrated demonstration programs being conducted at several DOE sites. The ISRIP has been conducting baseline assessments on in situ technologies to support program planning. Pacific Northwest Laboratory conducted an assessment and evaluation of subsurface containment barrier technology in support of ISRIP's Containment Technology Subprogram. This report summarizes the results of that activity and provides a recommendation for priortizing areas in which additional research and development is needed to advance the technology to the point of demonstration in support of DOE's site restoration activities

A Constraint Programming Model for Fast Optimal Stowage of Container Vessel Bays

DEFF Research Database (Denmark)

Delgado-Ortegon, Alberto; Jensen, Rune Møller; Janstrup, Kira

2012-01-01

Container vessel stowage planning is a hard combinatorial optimization problem with both high economic and environmental impact. We have developed an approach that often is able to generate near-optimal plans for large container vessels within a few minutes. It decomposes the problem into a master...... planning phase that distributes the containers to bay sections and a slot planning phase that assigns containers of each bay section to slots. In this paper, we focus on the slot planning phase of this approach and present a constraint programming and integer programming model for stowing a set...... of containers in a single bay section. This so-called slot planning problem is NP-hard and often involves stowing several hundred containers. Using state-of-the-art constraint solvers and modeling techniques, however, we were able to solve 90% of 236 real instances from our industrial collaborator to optimality...

Quantification of Fog Water Collection in Three Locations of Tenerife (Canary Islands

Directory of Open Access Journals (Sweden)

Axel Ritter

2015-06-01

Full Text Available We present the results of fog water collection obtained with cylindrical fog gauges at three locations on the northern side of Tenerife island (Spain: La Esperanza (1093 m a.s.l., Taborno (1015 m a.s.l., and El Gaitero (1747 m a.s.l.. Concomitant meteorological variables were also measured. We show that fog precipitation was more frequent than rainfall. However, the volumes and frequency of daily fog water collection varied among the three studied sites, usually not exceeding 10–40 L d−1/m2 of collecting surface. In La Esperanza, fog water harvesting occurred frequently, but was considerably lower than in the other two locations. However, while in Taborno fog water collection episodes were distributed throughout the period, in El Gaitero these were mainly concentrated in two periods, during autumn and winter 2012–2013. The study of the relationships between daily fog water yields and the averages of meteorological variables did not show any clear trend, but it suggested that the greater volumes of collected fog water were logically associated with higher wind speeds and lower solar radiation conditions. Fog water collection in La Esperanza and in Taborno typically occurred within a similar temperature interval (7.5–12.5 °C, while in El Gaitero the phenomenon was associated with a lower temperature range (2.5–10 °C.

Unusual Vermamoeba Vermiformis Strain Isolated from Snow in Mount Teide, Tenerife, Canary Islands, Spain

Directory of Open Access Journals (Sweden)

Maria Reyes-Batlle

2015-10-01

Full Text Available Background: Free-living amoebae (FLA are protozoa that are widely distributed in the environment mainly in water and soil related habitats. Thermophilic amoebae are among the most common FLA in water bodies, being Vermamoeba vermiformis one of the most common species reported worldwide from these sources. Interestingly, V. vermiformis has often been reported to survive at high temperatures and osmotic pressure worldwide.Materials and Methods: In this study, snow samples were collected from Mount Teide, Tenerife, Canary Islands during the winter season of 2014. The samples were culture on non nutrient agar plates and checked daily for the presence of FLA. After a week, V. vermiformis amoebae were observed in the plates incubated at room temperature and 37ºC.Results: Molecular characterization was carried out by amplifying the 18S rDNA gene and DNA sequencing, confirmed that the isolated strain belonged to Vermamoeba vermiformis species.Conclusion: To the best of our knowledge, this is the first report of Vermamoeba vermiformis isolation from such an inusual habitat (low temperatures and high altitude and the first report of these species in the Canary islands.

Shallow sub-surface structure of the central volcanic complex of Tenerife, Canary Islands: implications for the evolution and the recent reactivation of the Las Canadas caldera

Energy Technology Data Exchange (ETDEWEB)

Gottsmann, J [Department of Earth Sciences, University of Bristol, Wills Memorial Building, Queens Road, Bristol BS8 1RJ (United Kingdom); Camacho, A G; Fernandez, J [Instituto de Astronomia y Geodesia (CSIC-UCM), Ciudad Universitaria, Pza. de Ciencias, 3, 28040 Madrid (Spain); MartI, J [Institute of Earth Sciences ' Jaume Almera' , CSIC, Lluis Sole SabarIs s/n, Barcelona 08028 (Spain); Wooller, L; Rymer, H [Department of Earth and Environmental Sciences, Open University, Walton Hall, Milton Keynes, MK7 6AA (United Kingdom); GarcIa, A [Department of Volcanology, Museo Nacional de Ciencias Naturales, CSIC, C/ Jose Gutierrez Abascal, 2, 28006 Madrid (Spain)], E-mail: j.gottsmann@bristol.ac.uk

2008-10-01

We present a new local Bouguer anomaly map of the Central Volcanic Complex (CVC) of Tenerife, Spain. The high-density core of the CVC and the pronounced gravity low centred in the Las Canadas caldera (LCC) in greater detail than previously available. Mathematical construction of a subsurface model from the local anomaly data, employing a 3-D inversion enables mapping of the shallow structure beneath the complex, giving unprecedented insights into the sub-surface architecture of the complex, and shedding light on its evolution.

Cargo container inspection test program at ARPA's Nonintrusive Inspection Technology Testbed

Science.gov (United States)

Volberding, Roy W.; Khan, Siraj M.

1994-10-01

An x-ray-based cargo inspection system test program is being conducted at the Advanced Research Project Agency (ARPA)-sponsored Nonintrusive Inspection Technology Testbed (NITT) located in the Port of Tacoma, Washington. The test program seeks to determine the performance that can be expected from a dual, high-energy x-ray cargo inspection system when inspecting ISO cargo containers. This paper describes an intensive, three-month, system test involving two independent test groups, one representing the criminal smuggling element and the other representing the law enforcement community. The first group, the `Red Team', prepares ISO containers for inspection at an off-site facility. An algorithm randomly selects and indicates the positions and preparation of cargoes within a container. The prepared container is dispatched to the NITT for inspection by the `Blue Team'. After in-gate processing, it is queued for examination. The Blue Team inspects the container and decides whether or not to pass the container. The shipment undergoes out-gate processing and returns to the Red Team. The results of the inspection are recorded for subsequent analysis. The test process, including its governing protocol, the cargoes, container preparation, the examination and results available at the time of submission are presented.

LA ARQUEOLOGÍA HISTÓRICA EN CANARIAS. EL YACIMIENTO SEPULCRAL DE LA IGLESIA DE NUESTRA SEÑORA DE LA CONCEPCIÓN DE SANTA CRUZ DE TENERIFE (Historical archaeology in the Canaries. The burial site of the church of Our Lady of the Conception in Santa Cruz de Tenerife

Directory of Open Access Journals (Sweden)

Matilde Arnay de la Rosa

2009-09-01

Full Text Available En este estudio revisamos la situación actual de la Arqueología Histórica en las Islas Canarias, disciplina que, a diferencia de la americana, estaba poco desarrollada en las islas hasta hace unos 20 años. El reciente estudio de yacimientos históricos importantes ha modificado esta situación. Como ejemplo, comentamos algunos resultados derivados de la excavación de la iglesia de Nuestra Señora de la Concepción, en cuyo subsuelo se enterró a la población de Santa Cruz de Tenerife durante siglos. Pese a la pobre preservación de los esqueletos, ha sido posible inferir hábitos dietéticos, estado nutricional, exposición a tóxicos, y realizar estudios de DNA mitocondrial. El material recuperado (cerámica, pipas, crucifijos y adornos varios permite establecer estrechas relaciones con la colonización española del Nuevo Mundo. ENGLISH: This study includes an updated review of the current status of Historical Archaeology in the Canary Islands. Traditionally, in contrast with the situation in America, archaeological activity was devoted to studies on the prehistoric remains of population. In the last 20 years, excavation of some important historical sites has allowed the development of Historical Archaeology. As an example, we comment some results obtained from the excavation of the floor of the church of Our Lady of the Conception, where the deads of Santa Cruz de Tenerife were interred during centuries. Despite the poor preservation of the skeletons, it has been possible to infer dietary habits, toxic exposure, nutritional status and genetic lineages (mitochondrial DNA. Smoking pipes, ceramics and adornments associated with interments show a high similitude with those from colonial sites of the New World.

Object-Oriented Programming in the Development of Containment Analysis Code

International Nuclear Information System (INIS)

Han, Tae Young; Hong, Soon Joon; Hwang, Su Hyun; Lee, Byung Chul; Byun, Choong Sup

2009-01-01

After the mid 1980s, the new programming concept, Object-Oriented Programming (OOP), was introduced and designed, which has the features such as the information hiding, encapsulation, modularity and inheritance. These offered much more convenient programming paradigm to code developers. The OOP concept was readily developed into the programming language as like C++ in the 1990s and is being widely used in the modern software industry. In this paper, we show that the OOP concept is successfully applicable to the development of safety analysis code for containment and propose the more explicit and easy OOP design for developers

The NE Rift of Tenerife: towards a model on the origin and evolution of ocean island rifts; La dorsal NE de Tenerife: hacia un modelo del origen y evolucion de los rifts de islas oceanicas

Energy Technology Data Exchange (ETDEWEB)

Carracedo, J. C.; Guillou, H.; Rodriguez Badiola, E.; Perez-Torrado, F. J.; Rodriguez Gonzalez, A.; Peris, R.; Troll, V.; Wiesmaier, S.; Delcamp, A.; Fernandez-Turiel, J. L.

2009-07-01

The NE Rift of Tenerife is an excellent example of a persistent, recurrent rift, providing important evidence of the origin and dynamics of these major volcanic features. The rift developed in three successive, intense and relatively short eruptive stages (a few hundred ka), separated by longer periods of quiescence or reduced activity: A Miocene stage (7266 {+-}156 ka), apparently extending the central Miocene shield of Tenerife towards the Anaga massif; an Upper Pliocene stage (2710{+-} 58 ka) and the latest stage, with the main eruptive phase in the Pleistocene. Detailed geological (GIS) mapping, geomagnetic reversal mapping and stratigraphic correlation, and radioisotopic (K/Ar) dating of volcanic formations allowed the reconstruction of the latest period of rift activity. In the early phases of this stage the majority of the eruptions grouped tightly along the axis of the rift and show reverse polarity (corresponding to the Matuyama chron). Dykes are of normal and reverse polarities. In the final phase of activity, eruptions are more disperse and lavas and dykes are consistently of normal polarity (Brunhes chron). Volcanic units of normal polarity crossed by dykes of normal and reverse polarities yield ages apparently compatible with normal subchrons (M-B Precursor and Jaramillo) in the Upper Matuyama chron. Three lateral collapses successively mass-wasted the rift: The Micheque collapse, completely concealed by subsequent nested volcanism, and the Guimar and La Orotava collapses, that are only partially filled. Time occurrence of collapses in the NE rift apparently coincides with glacial stages, suggesting that giant landslides may be finally triggered by sea level chan-ges during glaciations. Pre-collapse and nested volcanism is predominantly basaltic, except in the Micheque collapse, where magmas evolved towards intermediate and felsic (trachytic) compositions. Rifts in the Canary Islands are long-lasting, recurrent features, probably related to primordial

Review of the severe accident risk reduction program (SARRP) containment event trees

International Nuclear Information System (INIS)

1986-05-01

A part of the Severe Accident Risk Reduction Program, researchers at Sandia National Laboratories have constructed a group of containment event trees to be used in the analysis of key accident sequences for light water reactors (LWR) during postulated severe accidents. The ultimate goal of the program is to provide to the NRC staff a current assessment of the risk from severe reactor accidents for a group of five light water reactors. This review specifically focuses on the development and construction of the containment event trees and the results for containment failure probability, modes and timing. The report first gives the background on the program, the review criteria, and a summary of the observations, findings and recommendations. secondly, the individual reviews of each committee member on the event trees is presented. Finally, a review is provided on the computer model used to construct and evaluate the event trees

PROPUESTA DE ITINERARIO GEOTURÍSTICO URBANO EN GARACHICO (TENERIFE, CANARIAS, ESPAÑA

Directory of Open Access Journals (Sweden)

Fco. Javier Dóniz-Páez

2016-01-01

Full Text Available En los destinos maduros de sol y playa los nuevos productos y experiencias turísticas son una realidad actual y necesaria. El geoturismo urbano es un producto de turismo muy novedoso que consiste en explotar turísticamente el relieve presente dentro de las ciudades tanto en afloramientos naturales como en los diferentes elementos del patrimonio cultural tangible inmueble. El objetivo de este artículo es diseñar y proponer un itinerario de geoturismo urbano con base espacial por el casco histórico de Garachico (Tenerife, Canarias, España, asociado directa e indirectamente con la erupción volcánica de 1706 y que contribuya a diversificar su oferta turística polarizada en sus atractivos históricos. Para ello la metodología utilizada consistió en el inventario, caracterización y valoración del patrimonio geológico-geomorfológico presente en los diferentes geomorfositios y en el patrimonio cultural tangible inmueble del casco histórico de la ciudad. Se seleccionaron catorce recursos naturales y culturales vinculados con la geodiversidad de Garachico. En función de la variedad de recursos inventariados, de las posibilidades que ofrece y de su distribución geográfica, el itinerario propuesto en formato de ruta abierta recorre los catorce atractivos seleccionados a lo largo de unos 2 km de longitud y de tres horas de duración.

Graduate Program Scheduling Gains Flexibility through Container Courses: A Case Study

Science.gov (United States)

Rose, Richard

2011-01-01

Online course delivery makes possible one innovation which can provide each student with greater program flexibility as well as some personal ownership of the direction and pace of his degree progress. This concept can be called the "container course." A container course is the offering of more than one course simultaneously under a single course…

Molecular characterization of Acanthamoeba strains isolated from domestic dogs in Tenerife, Canary Islands, Spain.

Science.gov (United States)

Valladares, María; Reyes-Batlle, María; Martín-Navarro, Carmen M; López-Arencibia, Atteneri; Dorta-Gorrín, Alexis; Wagner, Carolina; Martínez-Carretero, Enrique; Piñero, José E; Valladares, Basilio; Lorenzo-Morales, Jacob

2015-06-01

The present study describes two cases of Acanthamoeba infections (keratitis and ascites/peritonitis) in small breed domestic dogs in Tenerife, Canary Islands, Spain. In both cases, amoebic trophozoites were observed under the inverted microscope and isolated from the infected tissues and/or fluids, without detecting the presence of other viral, fungal or bacterial pathogens. Amoebae were isolated using 2 % non-nutrient agar plates and axenified for further biochemical and molecular analyses. Osmotolerance and thermotolerance assays revealed that both isolates were able to grow up to 37 °C and 1 M of mannitol and were thus considered as potentially pathogenic. Moreover, the strains were classified as highly cytotoxic as they cause more than 75 % of toxicity when incubated with two eukaryotic cell lines. In order to classify the strains at the molecular level, the diagnostic fragment 3 (DF3) region of the 18S rDNA of Acanthamoeba was amplified and sequenced, revealing that both isolates belonged to genotype T4. In both cases, owners of the animals did not allow any further studies or follow-up and therefore the current status of these animals is unknown. Furthermore, the isolation of these pathogenic amoebae should raise awareness with the veterinary community locally and worldwide.

Reactor Containment Spray Technology Program

Energy Technology Data Exchange (ETDEWEB)

Row, T. H. [Oak Ridge National Laboratory, Oak Ridge, TN (United States)

1968-12-15

The design basis accident in water moderated power reactors is a loss-of-coolant accident in which water sprays are generally employed to control the containment pressure transient by condensing the released steam-air mixture. Additives to the spray have been proposed as a way to increase their usefulness by enhancing the removal of various forms of radioiodine from the containment atmosphere. A program to investigate the gas-liquid systems involved is co-ordinated by ORNL for the US Atomic Energy Commission. A basic part of the program is the search for various chemical additives that will increase the spray affinity for molecular iodine and methyl iodide. A method for evaluating additives was developed that measures equilibrium distribution coefficients for iodine between air and aqueous solutions. Additives selected are used in single drop-wind tunnel experiments where the circulating gas contains iodine or CH{sub 3}I. Mass transfer coefficients and transient distribution coefficients have been determined as a function of relative humidity, temperature, drop size, and solution pH and concentration. Tests have shown that surfactants and organic amines increase the solution ability to getter CH{sub 3}l. Results from single drop tests help in planning spray experiments in the Nuclear Safety Pilot Plant, a large ({approx}38 m{sup 3}) facility, where accident conditions are closely simulated. Iodine and CH{sub 3}I removal rates have been determined for a number of solutions, including 1 wt% Na{sub 2}S{sub 2}O{sub 3} + 3000 ppm B + 0.153 M NaOH and 3000 ppm B + 0.153 M NaOH. The additive has very little effect in removal of I{sub 2} with half-lives of less than 1 mm typical for any aqueous solution. These same solutions remove CH{sub 3}I with a half-life of one hour. Analytical models for the removal processes have been developed. Consideration is also being given to corrosion, thermal and radiation stability of the solutions. Radiation studies have indicated the loss

75 FR 23631 - Sugar Re-Export Program, the Sugar-Containing Products Re-Export Program, and the Polyhydric...

Science.gov (United States)

2010-05-04

... Part 1530 Sugar Re-Export Program, the Sugar-Containing Products Re-Export Program, and the Polyhydric...), Additional U.S. Note 6, which authorizes entry of raw cane sugar under subheading 1701.11.20 of the HTS for the production of polyhydric alcohols, except polyhydric alcohols for use as a substitute for sugar in...

On the application of Hidden Markov Model and Bayesian Belief Network to seismic noise at Las Canadas Caldera, Tenerife, Spain

International Nuclear Information System (INIS)

Quintero Oliveros, Anggi; Carniel, Roberto; Tarraga, Marta; Aspinall, Willy

2008-01-01

The Teide-Pico Viejo volcanic complex situated in Tenerife Island (Canary Islands, Spain) has recently shown signs of unrest, long after its last eruptive episode at Chinyero in 1909, and the last explosive episode which happened at Montana Blanca, 2000 years ago. In this paper we study the seismicity of the Teide-Pico Viejo complex recorded between May and December 2004, in order to show the applicability of tools such as Hidden Markov Models and Bayesian Belief Networks which can be used to build a structure for evaluating the probability of given eruptive or volcano-related scenarios. The results support the existence of a bidirectional relationship between volcano-tectonic events and the background seismic noise - in particular its frequency content. This in turn suggests that the two phenomena can be related to one unique process influencing their generation

On the application of Hidden Markov Model and Bayesian Belief Network to seismic noise at Las Canadas Caldera, Tenerife, Spain

Energy Technology Data Exchange (ETDEWEB)

Quintero Oliveros, Anggi [Dipartimento di Georisorse e Territorio, Universita di Udine (Italy); Departamento de Ciencias de La Tierra, Universidad Simon Bolivar, Caracas (Venezuela); Carniel, Roberto [Dipartimento di Georisorse e Territorio, Universita di Udine (Italy)], E-mail: roberto.carniel@uniud.it; Tarraga, Marta [Departamento de Volcanologia, Museo Nacional de Ciencias Naturales, CSIC, Madrid (Spain); Aspinall, Willy [Aspinall and Associates, 5 Woodside Close, Beaconsfield, Bucks (United Kingdom)

2008-08-15

The Teide-Pico Viejo volcanic complex situated in Tenerife Island (Canary Islands, Spain) has recently shown signs of unrest, long after its last eruptive episode at Chinyero in 1909, and the last explosive episode which happened at Montana Blanca, 2000 years ago. In this paper we study the seismicity of the Teide-Pico Viejo complex recorded between May and December 2004, in order to show the applicability of tools such as Hidden Markov Models and Bayesian Belief Networks which can be used to build a structure for evaluating the probability of given eruptive or volcano-related scenarios. The results support the existence of a bidirectional relationship between volcano-tectonic events and the background seismic noise - in particular its frequency content. This in turn suggests that the two phenomena can be related to one unique process influencing their generation.

[Exposure to persistent and non-persistent pesticides in a non-occupationally exposed population in Tenerife Island (Spain)].

Science.gov (United States)

Burillo-Putze, Guillermo; Luzardo, Octavio P; García, Carlos Pérez; Zumbado, Manuel; Yanes, Carmen; Trujillo-Martín, María del Mar; Boada Fernández del Campo, Carlos; Boada, Luis D

2014-01-01

Chronic exposure to non-persistent pesticides (NPPs) is of concern because these substances have been associated with chronic diseases. However, few studies have addressed chronic exposure to NPPs in Spanish populations. We determined the presence of 24 pesticide residues by gas chromatography/mass spectrometry in 363 serum samples obtained from non-occupationally exposed adults from Tenerife island in 2007. Most of the samples (99.45%) showed detectable residues (6 ± 2 pesticides per sample). The most frequently detected pesticides were pyrethrins (96.1%), organophosphates (93.9%) and organochlorines (92.3%). The neurotoxicants bifenthrin and malathion were detected in 81% of the samples and hexachlorobenzene DDT and buprofezin in more than 50%. Malation, an "environmental obesogen", was detected in 82%, and "endocrine disrupter" pesticides were present in 97.2% of the samples. Because there is clear, continuous and inadvertent exposure to NPPs that may be inducing adverse effects on human health, NPPs should be included in biomonitoring studies. Copyright © 2013 SESPAS. Published by Elsevier Espana. All rights reserved.

Propuesta de rutas de geoturismo urbano en Icod de Los Vinos (Tenerife, Islas Canarias, España

Directory of Open Access Journals (Sweden)

Javier Dóniz-Páez

2016-01-01

Full Text Available En los destinos maduros de sol y playa los nuevos productos y experiencias turísticas son una realidad palpable. El geoturismo urbano se presenta como un producto de turismo muy novedoso que consiste en explotar turísticamente el relieve presente dentro de las ciudades. Este artículo propone diferentes rutas de geoturismo urbano en el municipio de Icod de Los Vinos (Tenerife, Canarias, España a partir del inventario, caracterización y valoración del patrimonio geomorfológico presente en los diferentes geomorfositios y en el patrimonio cultural tangible inmueble. Se han seleccionado doce recursos naturales y culturales vinculados con la geodiversidad de Icod de los Vinos. En función de la variedad de recursos inventariados y de las posibilidades que ofrece esta nueva modalidad de ocio turístico, los itinerarios propuestos responden a tres rasgos principales: el tiempo geológico, la temática geológica y geomorfológica, y la espacial.

Análisis del riesgo volcánico asociado al flujo de lavas en Tenerife (Islas Canarias: escenarios previsibles para una futura erupción en la isla

Directory of Open Access Journals (Sweden)

Hansen Machín, A.

2004-12-01

Full Text Available The spatial and temporal distribution of volcanic eruptions in the Canarian Archipelago are a consequence of their origin and evolution, in response to hotspot activity. Therefore, the probability that eruptive phenomena will occur is greater in the western islands (Tenerife, La Palma and El Hierro, the closest to the hotspot vertex, where hundreds of eruptions have been localized in the last 20.000 years. By contrast, in La Gomera (presently in the volcanic repose stage and in the easterly islands of Gran Canaria, Fuerteventura and Lanzarote (the most distant and oldest, in the post-erosive stage of development, few eruptions, if any, have taken place during this period. Rift structures known as «dorsals» have been defined in the more active westerly islands, where the greater part of the recent volcanic activity has been concentrated. Objective data therefore exist that permit the assessment and zonification of eruptive hazards in the archipelago. In this work the assessment of volcanic hazards in the island of Tenerife is presented, whichare concentrated in the volcanic system formed by the central edifice of Mt. Teide and the Northwest Rift. Numerous radiometric datings (14C and K/Ar and the preparation of detailed digitalized and georeferenced geological mapping (GIS have permitted an initia1 analysis and assessment of the volcanic hazards in this island, which presents the greatest risk of eruptions because of the number of recent eruptions and their complexity, in addition to demographic density.La distribución en el tiempo y el espacio de las erupciones volcánicas en el Archipiélago Canario es consecuencia de su origen y evolución, como respuesta a la actividad de un punto caliente. Por consiguiente, la probabilidad de ocurrencia de fenómenos eruptivos es mayor en las islas occidentales (Tenerife, La Palma y El Hierro, las más próximas a la vertical del punto caliente, donde se han localizado centenares de erupciones en los

A program to assess microbial impacts on nuclear waste containment

International Nuclear Information System (INIS)

Horn, J.; Meike, A.

1996-01-01

In this paper we discuss aspects of a comprehensive program to identify and bound potential effects of microorganisms on long-term nuclear waste containment, using as examples, studies conducted within the Yucca Mountain Project. A comprehensive program has been formulated which cuts across standard disciplinary lines to address the specific concerns of microbial activity in a radioactive waste repository. Collectively, this program provides bounding parameters of microbial activities that modify the ambient geochemistry and hydrology, modify corrosion rates, and transport and transform radionuclides under conditions expected to be encountered after geological waste emplacement. This program is intended to provide microbial reaction rates and bounding conditions in a form that can be integrated into existing chemical and hydrological models. The inclusion of microbial effects will allow those models to more accurately assess long term repository integrity

A potencialidade das redes sociais na promoção de destinos turísticos: O caso de Tenerife

Directory of Open Access Journals (Sweden)

S. Wichels

2018-05-01

Full Text Available As redes sociais, poderosas plataformas de relacionamento, captação e fidelização de clientes, nomeadamente o TripAdvisor, o Facebook e o Instagram ou a Blogosfera, estão a influenciar novos comportamentos do consumidor, obrigando a novas práticas em comunicação turística. Frente a esta realidade, as estratégias e ferramentas de comunicação e marketing tradicionais dos destinos turísticos mostram-se menos efetivas e a mudança envolve não só o como e quando se comunica, mas também o quê. Neste artigo analisamos, enquanto estudo de caso, a estratégia de comunicação e redes sociais de Tenerife. Como estará a reagir um dos destinos mais consolidados do mundo, à mudança de paradigma em comunicação turística?

"This program contains product placement": Effects of sponsorship disclosure on television viewers’ responses

NARCIS (Netherlands)

Boerman, S.C.

2014-01-01

Television viewers are increasingly exposed to texts saying "This program contains product placement" or PP (short for product placement) logos incorporated in television programs. These so-called sponsorship disclosures aim to inform viewers about advertising that is embedded in television

The recent seismicity of Teide volcano, Tenerife (Canary Islands, Spain)

Science.gov (United States)

D'Auria, L.; Albert, G. W.; Calvert, M. M.; Gray, A.; Vidic, C.; Barrancos, J.; Padilla, G.; García-Hernández, R.; Perez, N. M.

2017-12-01

Tenerife is an active volcanic island which experienced several eruptions of moderate intensity in historical times, and few explosive eruptions in the Holocene. The increasing population density and the consistent number of tourists are constantly raising the volcanic risk of the island.On 02/10/2016 a remarkable swarm of long-period events was recorded and was interpreted as the effect of a transient massive fluid discharge episode occurring within the deep hydrothermal system of Teide volcano. Actually, since Oct. 2016, the hydrothermal system of the volcano underwent a progressive pressurization, testified by the marked variation of different geochemical parameters. The most striking observation is the increase in the diffuse CO2 emission from the summit crater of Teide volcano which started increasing from a background value of about 20 tons/day and reaching a peak of 175 tons/day in Feb. 2017.The pressurization process has been accompanied by an increase in the volcano-tectonic seismicity of. Teide volcano, recorded by the Red Sísmica Canaria, managed by Instituto Volcanológico de Canarias (INVOLCAN). The network began its full operativity in Nov. 2016 and currently consists of 15 broadband seismic stations. Since Nov. 2016 the network detected more than 100 small magnitude earthquakes, located beneath Teide volcano at depths usually ranging between 5 and 15 km. On January 6th 2017 a M=2.5 earthquake was recorded in the area, being one of the strongest ever recorded since decades. Most of the events show typical features of the microseismicity of hydrothermal systems: high spatial and temporal clustering and similar waveforms of individual events which often are overlapped.We present the spatial and temporal distribution of the seismicity of Teide volcano since Nov. 2016, comparing it also with the past seismicity of the volcano. Furthermore we analyze the statistical properties of the numerous swarms recorded until now with the aid of a template

Wave and offshore wind potential for the island of Tenerife

International Nuclear Information System (INIS)

Veigas, M.; Iglesias, G.

2013-01-01

Highlights: • The island aims to reduce its carbon footprint by developing renewable energy. • The substantial wave and offshore wind resources around the island are examined. • One area is appropriate for installing a hybrid wave–offshore wind farm. - Abstract: The island of Tenerife, a UNESCO Biosphere Reserve in the Atlantic Ocean, aims to be energy self-sufficient in order to reduce its carbon footprint. To accomplish this goal it should develop the renewable sources, in particular wave and offshore wind energy. The objectives of this work are twofold; (i) to characterize the wave and offshore wind power distribution around the island and (ii) to determine which offshore area is best suited for their exploitation, taking into account the resource and other conditioning factors such as the bathymetry, distance to the coastline and ports, and offshore zoning. To carry out this research, hindcast wave and wind data obtained with numerical models are used alongside observations from meteorological stations. One area, in the vicinity of Puerto de la Cruz, is identified as having great potential for installing a hybrid floating wave–wind farm. Both resources are characterized for the area selected: the wave resource in terms of wave directions, significant wave heights and energy periods; the offshore wind resource in terms of directions and speeds in addition to the seasonality for the both resources. It is found that most of the wave resource is provided by N and NNW waves with significant wave heights between 1.5 m and 3.0 m and energy periods between 10 s and 14 s. It follows that the Wave Energy Converters deployed in the area should have maximum efficiency in those ranges. As for the offshore wind resource, most of the energy corresponds to NNE and NE winds with speeds between 9 and 14 m s −1 , which should be taken into account when selecting the offshore wind turbines

Performance-based improvement of the leakage rate test program for the reactor containment of HTTR. Adoption of revised test programs containing 'Type A, Type B and Type C tests'

International Nuclear Information System (INIS)

Kondo, Masaaki; Emori, Koichi; Sekita, Kenji; Furusawa, Takayuki; Hayakawa, Masato; Kozawa, Takayuki; Aono, Tetsuya; Kuroha, Misao; Ouchi, Hiroshi; Kimishima, Satoru

2008-10-01

The reactor containment of HTTR is periodically tested to confirm leak-tight integrity by conducting overall integrated leakage rate tests, so-called 'Type A tests,' in accordance with a standard testing method provided in Japan Electric Association Code (JEAC) 4203. 'Type A test' is identified as a basic one for measuring whole leakage rates for reactor containments, it takes, however, much of cost and time of preparation, implementation and restoration of itself. Therefore, in order to upgrade the maintenance technology of HTTR, the containment leakage rate test program for HTTR was revised by adopting efficient and economical alternatives including Type B and Type C tests' which intend to measure leakage rates for containment penetrations and isolation valves, respectively. In JEAC4203-2004, following requirements are specified for adopting an alternative program: upward trend of the overall integrated leakage rate due to aging affection should not be recognized; performance criterion for combined leakage rate, that is a summation of local leakage rates evaluated by Type B and Type C tests and converted to whole leakage rates, should be established; the criterion of the combined leakage rate should be satisfied as well as of the overall integrated leakage rate; correlation between the overall integrated and combined leakage rates should be recognized. Considering the historical performances, policies of conforming to the forgoing requirements and of carrying out the revised test program were developed, which were accepted by the regulatory agency. This report presents an outline of the leakage rate tests for the reactor containment of HTTR, identifies practical issues of conventional Type A tests, and describes the conforming and implementing policies mentioned above. (author)

Linguistic Decipherment of the Lettering on the (Original Carving of the Virgin of Candelaria from Tenerife (Canary Islands

Directory of Open Access Journals (Sweden)

Vicente Jara Vera

2017-07-01

Full Text Available The wooden carving of Our Lady of Candelaria, discovered in the municipality of the same name on the island of Tenerife (Canary Islands during the first half of the fifteenth century, had nearly two hundred letters of the Latin alphabet inscribed on her garments. Unfortunately the original carving disappeared after the storm that took place in 1826. Once the original letters on the first image were discovered by means of analysing both textual and artistic documentation and sources, we conclude that the text is archaic-Berber language used by the islanders, Insular-Amazigh, which no longer exists in the present day. Having discussed lexical, morphological, syntactic and phonetic aspects of this archaic language, as well as conducted a semantic analysis of the carving both from the native aboriginal perspective and the Christian one, we expound here our proposal of the meaning of the letters engraved on the Marian carving of Candelaria from its lexical voices and roots of their Berber and Insular-Amazigh languages, with the previous proposed solutions.

Tree Species Composition and Structure near Road Borders in the Laurel Forest of Anaga (Tenerife – Islas Canarias

Directory of Open Access Journals (Sweden)

Zaira Negrín

2016-11-01

Full Text Available Urbanization is one of the main causes of species extinction. Closely linked to urbanization are road systems, which are a source of biotic and abiotic effects on the surrounding landscape. The continued existence of these corridors results in enormous human activity (Forman & Alexander, 1998. In particular, roads sharply define and fragment forest ecosystems leading to changes in plant species composition and vegetation structure from road border to the surrounding interior. This paper assesses border effects on tree species richness and composition in the laurel forest of Anaga, Tenerife, Spain. Effects of anthropogenic corridors on vegetation differed among the study sites. Multivariate analysis revealed that species composition is more related to the sampling site than to the effect of the corridor, while for density, significant differences were found between the road border and forest interior but not as a regular pattern. This suggests that main corridor disturbances regarding tree basal area is limited to the immediate road edge in the laurel forest, while for species composition, no significant differences were found.

Object-oriented image analysis and change detection of land-use on Tenerife related to socio-economic conditions

Science.gov (United States)

Naumann, Simone; Siegmund, Alexander

2004-10-01

The island Tenerife is characterized by an increasing tourism, which causes an enormous change of the socio-economic situation and a rural exodus. This development leads - beside for example sociocultural issues - to fallow land, decreasing settlements, land wasting etc., as well as to an economic and ecological problem. This causes to a growing interest in geoecological aspects and to an increasing demand for an adequate monitoring database. In order to study the change of land use and land cover, the technology of remote sensing (LANDSAT 3 MSS and 7 ETM+, orthophotos) and geographical information systems were used to analyze the spatial pattern and its spatial temporal changes of land use from end of the 70s to the present in different scales. Because of the heterogeneous landscape and the unsatisfactory experience with pixel-based classification of the same area, object-oriented image analysis techniques have been applied to classify the remote sensed data. A post-classification application was implemented to detect spatial and categorical land use and land cover changes, which have been clipped with the socio-economic data within GIS to derive the driving forces of the changes and their variability in time and space.

100 años del nacimiento de la Psicología Comparada en Tenerife (I: W. Köhler y la Casa Amarilla

Directory of Open Access Journals (Sweden)

Carlos J. Álvarez

2014-07-01

Full Text Available El presente artículo está motivado por la celebración de los 100 años del nacimiento de la psicología comparada actual y de la primatología en nuestro país. En 1913 Alemania instala en Tenerife la primera estación primatológica del mundo. Unos meses más tarde, en 1914, Wolfgang Köhler comienza allí sus experimentos sobre la cognición de los chimpancés y la resolución de problemas. Dichos trabajos dieron lugar a la consolidación (y nacimiento, para muchos de la Psicología de la Gestalt, siendo sus investigaciones clásicas en la historia de la disciplina. En este artículo se describe cómo fue posible tal evento.

SHOCK-JR: a computer program to analyze impact response of shipping container

International Nuclear Information System (INIS)

Ikushima, Takeshi; Nakazato, Chikara; Shimoda, Osamu; Uchino, Mamoru.

1983-02-01

The report is provided for using a computer program, SHOCK-JR, which is used to analyze the impact response of shipping containers. Descriptions are the mathematical model, method of analysis, structures of the program and the input and output variables. The program solves the equations of motion for a one-dimensional, lumped mass and nonlinear spring model. The solution procedure uses Runge-Kutta-Gill and Newmark-β methods. SHOCK-JR is a revised version of SHOCK, which was developed by ORNL. In SHOCK-JR, SI dimension is used and graphical output is available. (author)

Laurel forest recovery during 20 years in an abandoned firebreak in Tenerife, Canary Islands

Science.gov (United States)

Ramón Arévalo, José; Dolores Peraza, María; Álvarez, Carlos; Bermúdez, Alfredo; Domingo Delgado, Juan; Gallardo, Antonio; María Fernández-Palacios, José

2008-01-01

This study assessed the recovery of the structure and species composition of a laurel forest in an abandoned firebreak in the Rural Park of Anaga, Tenerife (Canary Islands). We statistically compared values of species richness, density and biovolume between 23 plots in the firebreak and six control plots in natural forest near the firebreak. We evaluated changes in species composition with detrended correspondence analysis (DCA) based on densities and biovolume. Biovolume is increasing significantly along the successional gradient (from 1990 to 2004) but remains less than the values in control plots. Stem densities were significantly lower in control plots than in 2004 plots. Species richness was significantly higher in control plots than in 2004 plots (although there were no differences in values obtained between the first sampling period 6 years after abandonment, and the second sampling 20 years after abandonment). Changes in species richness are significant, but all species present in control plots are also found in the firebreak plots. DCA based on biovolume significantly discriminated control plots from firebreak plots in 1990 (for axis I). Results suggest recovery to a laurel forest is occurring, although more time will be required to reach control plot density and biovolume values. The low intensity of disturbance and a well-conserved forest adjacent to the firebreak favour the recovery of species inside the firebreak. We advise eliminating suckers from all small trees (leaving the bigger stems) to accelerate succession to a vegetation structure similar to that found surrounding the firebreak.

Subsidence and current strain patterns on Tenerife Island (Canary Archipelago, Spain) derived from continuous GNSS time series (2008-2015)

Science.gov (United States)

Sánchez-Alzola, A.; Martí, J.; García-Yeguas, A.; Gil, A. J.

2016-11-01

In this paper we present the current crustal deformation model of Tenerife Island derived from daily CGPS time series processing (2008-2015). Our results include the position time series, a global velocity estimation and the current crustal deformation on the island in terms of strain tensors. We detect a measurable subsidence of 1.5-2 mm/yr. in the proximities of the Cañadas-Teide-Pico Viejo (CTPV) complex. These values are higher in the central part of the complex and could be explained by a lateral spreading of the elastic lithosphere combined with the effect of the drastic descent of the water table in the island experienced during recent decades. The results show that the Anaga massif is stable in both its horizontal and vertical components. The strain tensor analysis shows a 70 nstrain/yr. E-W compression in the central complex, perpendicular to the 2004 sismo-volcanic area, and 50 nstrain/yr. SW-NE extension towards the Northeast ridge. The residual velocity and strain patterns coincide with a decline in volcanic activity since the 2004 unrest.

Atmospheric corrosion in subtropical areas: XRD and electrochemical study of zinc atmospheric corrosion products in the province of Santa Cruz de Tenerife (Canary Islands, Spain)

Energy Technology Data Exchange (ETDEWEB)

Morales, J. [Departamento de Quimica Fisica, Universidad de La Laguna, 38071 La Laguna, Tenerife (Spain)]. E-mail: jmorales@ull.es; Diaz, F. [Departamento de Quimica Fisica, Universidad de La Laguna, 38071 La Laguna, Tenerife (Spain); Hernandez-Borges, J. [Departamento de Quimica Analitica, Nutricion y Bromatologia, Universidad de La Laguna, 38071 La Laguna, Tenerife (Spain); Gonzalez, S. [Departamento de Quimica Fisica, Universidad de La Laguna, 38071 La Laguna, Tenerife (Spain)

2006-02-15

In the present paper, zinc sheets have been exposed for 4 years to the action of different atmospheres in 35 test sites located in the province of Santa Cruz de Tenerife, Canary Islands, Spain. Corrosion products formed on the surface of the samples have been identified by means of X-ray diffraction (XRD) for the first and second year of exposure. Zincite, hydrozincite, simonkolleite, zinc chlorohydroxysulphate, zinc oxysulphate and zinc hydroxysulphate have been identified in the test sheets. Preliminary results of an electrochemical study of the breakdown potential of zinc samples are also presented in order to test the protective effect of the film formed on the surface of the samples. It was found that the protective effect of this film increases linearly with exposure time.

Un Análisis de La App Turística Tenerife Accesible

Directory of Open Access Journals (Sweden)

Jakson Renner Rodrigues Soares

2017-04-01

Full Text Available El turismo es una actividad económica que tiene un importante impacto en la balanza comercial española. No debería ser privativo y se nota que cada vez más las barreras de acceso a las infraestructuras a personas con necesidades especiales son derribadas. Quiere sean los transportes, las infraestructuras hoteleras o de restauración, al igual que museos o hasta mismo las playas, todos los elementos que conforman la actividad turística vienen se tornando cada vez más accesibles. Entendemos esa accesibilidad como las facilidades que personas con alguna necesidad especial (movilidad reducida, discapacidad visual o auditiva puedan gozar del mismo espacio que cualquiera otro turista. Ese estudio tiene como objetivo analizar la existencia de aplicativos para móviles de destinos turísticos que consideran alguna de las necesidades especiales de los individuos. Para eso, fueron analizadas las más de 200 APPS presentadas por Seggitur en la Guía APPS turísticas 2016. Segundo Segittur (2016, p.2 “las nuevas tecnologías se han puesto definitivamente al servicio del turista”. Pero ellas piensan verdaderamente en todos los turistas? Encontramos que de todas las APPS que constan en el informe, solo una está desarrollada para el público que tiene necesidades especiales: Tenerife Accesible. Ella trabaja cuestiones de la imagen del destino turístico enfocando su actuación a las necesidades de este público. Además, hemos encontrado que el destino utiliza el deporte como un reclamo de atracción para este segmento. Con todo, en este documento se podrán encontrar las relaciones innovación, turismo y deportes accesibles.

Contempt-LT: a computer program for predicting containment pressure-temperature response to a loss-of-coolant accident

International Nuclear Information System (INIS)

Wheat, L.L.; Wagner, R.J.; Niederauer, G.F.; Obenchain, C.F.

1975-06-01

CONTEMPT-LT is a digital computer program, written in FORTRAN IV, developed to describe the long-term behavior of water-cooled nuclear reactor containment systems subjected to postulated loss-of-coolant accident (LOCA) conditions. The program calculates the time variation of compartment pressures, temperatures, mass and energy inventories, heat structure temperature distributions, and energy exchange with adjacent compartments. The program is capable of describing the effects of leakage on containment response. Models are provided to describe fan cooler and cooling spray engineered safety systems. Up to four compartments can be modeled with CONTEMPT-LT, and any compartment except the reactor system may have both a liquid pool region and an air-vapor atmosphere region above the pool. Each region is assumed to have a uniform temperature, but the temperatures of the two regions may be different. CONTEMPT-LT can be used to model all current boiling water reactor pressure suppression systems, including containments with either vertical or horizontal vent systems. CONTEMPT-LT can also be used to model pressurized water reactor dry containments, subatmospheric containments, and dual volume containments with an annulus region, and can be used to describe containment responses in experimental containment systems. The program user defines which compartments are used, specifies input mass and energy additions, defines heat structure and leakage systems, and describes the time advancement and output control. CONTEMPT-LT source decks are available in double precision extended-binary-coded-decimal-interchange-code (EBCDIC) versions. Sample problems have been run on the IBM360/75 computer. (U.S.)

An Administrator's Manual for Planning, Developing, and Implementing Mainstream, Self-Contained, or Co-op Programs for the Disadvantaged.

Science.gov (United States)

Pennsylvania State Univ., University Park. Div. of Occupational and Vocational Studies.

This administrator's manual contains guidelines for planning, developing, and implementing mainstream, self-contained, or cooperative work experience programs for the disadvantaged. Outlined in the introductory section are the philosophy underlying programs for the disadvantaged, procedures to determine student eligibility, signals indicating the…

Raman-IR vibrational and XRD characterization of ancient and modern mineralogy from volcanic eruption in Tenerife Island: Implication for Mars

Directory of Open Access Journals (Sweden)

E.A. Lalla

2016-07-01

Full Text Available A detailed vibrational Raman-IR spectroscopic and diffractional analyses have been performed on basalts from two locations from Tenerife Island: (1 the Arenas Negras volcano which belongs to the historical eruption not showing visible alteration and (2 Pillow Lavas zone from Anaga Massif which shows a clearly fluid-rock interaction caused by submarine alteration. These places have been extensively studied due to its similarity with the surface of Mars. The analysis is based on the mineral detection of selected samples by a Micro-Raman study of the materials. The complementary techniques have confirmed the mineralogy detected by the Raman measurement. The results show a volcanic environment behavior with primary phases like olivine, pyroxene, and feldspar/plagioclase. Moreover, the presence of accessory minerals or secondary mineralization like phosphate, iron oxides, zeolite or carbonates shows the alteration processes on each outcrop. The variation in the crystallinity and amorphous phases is related to fluid-rock interaction caused by hydrothermal episodes and external weathering processes, which shows several analogies with the ancient volcanic activity from Mars.

Las trayectorias de vida de los jóvenes de Santa Cruz de Tenerife en tiempos de crisis: una aproximación cualitativa

Directory of Open Access Journals (Sweden)

Gomer Betancor Nuez

2015-04-01

Full Text Available Este artículo, producto de un proyecto financiado por la Fundación Cajacanariasy la Asociación Cultural TuSantaCruz, analiza las perspectivas juveniles acerca de la realidad social, política y económica que marcan las diferentes trayectorias de vida de la juventud que habita en Santa Cruz de Tenerife. El uso del concepto de joven que hacemos en este trabajo es más abierto de lo habitual, pues concebimos que la juventud es una categoría social atravesada por cuestiones como el origen social, el nivel de estudios y la clase social, por lo que no es un colectivo caracterizado únicamente por un aspecto biológico-generacional.  La metodología utilizada es de tipo cualitativa, concretamente  se ha empleado la técnica denominada grupos de discusión.

The nonlinear finite element analysis program NUCAS (NUclear Containment Analysis System) for reinforced concrete containment building

Energy Technology Data Exchange (ETDEWEB)

Lee, Sang Jin; Lee, Hong Pyo; Seo, Jeong Moon [Korea Atomic Energy Research Institute, Taejeon (Korea)

2002-03-01

The maim goal of this research is to develop a nonlinear finite element analysis program NUCAS to accurately predict global and local failure modes of containment building subjected to internal pressure. In this report, we describe the techniques we developed throught this research. An adequate model to the analysis of containment building such as microscopic material model is adopted and it applied into the development Reissner-Mindlin degenerated shell element. To avoid finite element deficiencies, the substitute strains based on the assumed strain method is used in the shell formulation. Arc-length control method is also adopted to fully trace the peak load-displacement path due to crack formation. In addition, a benchmark test suite is developed to investigate the performance of NUCAS and proposed as the future benchmark tests for nonlinear analysis of reinforced concrete. Finally, the input format of NUCAS and the examples of input/output file are described. 39 refs., 65 figs., 8 tabs. (Author)

Presencia de Giardia lamblia y Cryptosporidium spp. en aguas residuales depuradas reutilizadas para riego agrícola en la isla de Tenerife, España. Efectos del transporte a larga distancia sobre la calidad del agua reutilizada Giardia lamblia and Cryptosporidium spp. Presence in treated wastewater reutilised for irrigation in Tenerife island, Spain. Long-distance transport effects in the reutilised water quality

Directory of Open Access Journals (Sweden)

Escolástico Aguiar González

2002-06-01

Full Text Available El empleo de aguas residuales depuradas para riego agrícola es la alternativa de reutilización con más relevancia hoy día, siempre y cuando se desarrolle con garantías sanitarias y medioambientales.Giardia lamblia y Cryptosporidium spp. son dos protozoos patógenos entéricos de amplia distribución ambiental, frecuentes en hábitats acuáticos. La investigación y detección de estos parásitos en aguas ha adquirido importancia en los últimos años debido a que poseen formas de dispersión resistentes a los tratamientos habituales, aplicados tanto en procesos de potabilización como de depuración, y a que han sido clasificados como patógenos emergentes causantes de importantes brotes de transmisión hídrica.En este trabajo se estudia la presencia de quistes de Giardia lamblia y ooquistes de Cryptosporidium spp. en el agua residual depurada de la ciudad de Santa Cruz de Tenerife que es transportada hasta el sur de la isla de Tenerife para su reutilización en agricultura. Asimismo se investiga el efecto del transporte, el almacenamiento y el tratamiento avanzado sobre la concentración de quistes y ooquistes a través del sistema, y la existencia de relaciones con otros parámetros bacteriológicos y físico-químicos.Los resultados obtenidos ponen de manifiesto comportamientos variables de los contenidos en quistes y ooquistes frente a los tratamientos aplicados, y el efecto depurador que el transporte a larga distancia, parece tener sobre el agua residual depurada.No se han encontrado relaciones entre las concentraciones de quistes y ooquistes en el agua residual depurada y el contenido de los indicadores tradicionales de contaminación fecal.Treated wastewater use for irrigation is, nowadays, the more relevant reutilization alternative of wastewater, if it is developed with sanitary and environmental warranties.Giardia lamblia and Cryptosporidium spp. two wide distributed enteric pathogen protozoan, which are frequent in aquatic

In Situ Remediation Integrated Program: Evaluation and assessment of containment technology

International Nuclear Information System (INIS)

Gerber, M.A.; Fayer, M.J.

1994-06-01

Containment technology refers to a broad range of methods that are used to contain waste or contaminated groundwater and to keep uncontaminated water from entering a waste site. The U.S. Department of Energy's (DOE) Office of Technology Development has instituted the In Situ Remediation Integrated Program (ISRIP) to advance the state-of-the-art of innovative technologies that contain or treat, in situ, contaminated media such as soil and groundwater, to the point of demonstration and to broaden the applicability of these technologies to the widely varying site remediation requirements throughout the DOE complex. The information provided here is an overview of the state-of-the-art of containment technology and includes a discussion of ongoing development projects; identifies the technical gaps; discusses the priorities for resolution of the technical gaps; and identifies the site parameters affecting the application of a specific containment method. The containment technology described in this document cover surface caps; vertical barriers such as slurry walls, grout curtains, sheet pilings, frozen soil barriers, and vitrified barriers; horizontal barriers; sorbent barriers; and gravel layers/curtains. Within DOE, containment technology could be used to prevent water infiltration into buried waste; to provide for long-term containment of pits, trenches, and buried waste sites; for the interim containment of leaking underground storage tanks and piping; for the removal of contaminants from groundwater to prevent contamination from migrating off-site; and as an interim measure to prevent the further migration of contamination during the application of an in situ treatment technology such as soil flushing. The ultimate goal is the implementation of containment technology at DOE sites as a cost-effective, efficient, and safe choice for environmental remediation and restoration activities

LA INFLUENCIA DE LOS FACTORES TOPOCLIMÁTICOS EN LA ORGANIZACIÓN GEOGRÁFICA DE LOS SABINARES DE ANAGA (TENERIFE, ISLAS CANARIAS

Directory of Open Access Journals (Sweden)

Manuel Luis González

2016-01-01

Full Text Available Se estudian los efectos de los factores topoclimáticos sobre las dos muestras mejor conservadas de la vegetación termófila de la isla de Tenerife: el sabinar de Afur y el de la Punta de Anaga. El análisis se realiza a dos escalas espaciales: comarcal y local. La primera permite mostrar las diferencias entre los dos emplazamientos; mientras que a través de la segunda se ponen de manifiesto las variaciones internas en cada uno de ellos. Las variaciones locales de altitud y orientación dan lugar a cambios florísticos y fisionómicos que aparecen reflejados en los inventarios de campo realizados. Por la mayor diversidad de combinaciones de factores ambientales, en Afur se localiza la muestra de sabinar más rica y compleja. Los análisis a escala local demuestran que los contrastes de orientación pueden llegar a ser más importantes que los provocados por los gradientes climáticos verticales.

TRUPACT-II container maintenance program plan

International Nuclear Information System (INIS)

1990-11-01

This document details the maintenance/repair and replacement of components, as well as the documentation required and the procedures to be followed to maintain the integrity of the TRUPACT-II container, in accordance with requirements of the TRUPACT-II Container Operations and Maintenance Manual, OM-134, the TRUPACT-II Container Safety Analysis Report (SARP), and the TRUPACT-II Container Certificate of Compliance (Number 9218). The routine shipping and receiving inspections required by the Department of Transportation (DOT), Department of Energy (DOE), Nuclear Regulatory Commission (NRC) and other regulations are not addressed in this document. This document applies to all DOE shipping and receiving sites that use the TRUPACT-II containers

Containment safety margins

International Nuclear Information System (INIS)

Von Riesemann, W.A.

1980-01-01

Objective of the Containment Safety Margins program is the development and verification of methodologies which are capable of reliably predicting the ultimate load-carrying capability of light water reactor containment structures under accident and severe environments. The program was initiated in June 1980 at Sandia and this paper addresses the first phase of the program which is essentially a planning effort. Brief comments are made about the second phase, which will involve testing of containment models

FAUST/CONTAIN; FAUST/CONTAIN

Energy Technology Data Exchange (ETDEWEB)

Cherdron, W.; Minges, J.; Sauter, H.; Schuetz, W.

1995-08-01

The FAUNA facility has been restructured after completion of the sodium fire experiments. It is now serving LWR research, cf. report II on program no. 32.21.02 concerning steam explosions. The CONTAIN code system for computing the thermodynamic, aerosol and radiological phenomena in a containment under severe accident conditions is being developed with a new to fission product release and transport. (orig.)

Processing of radon time series in underground environments: Implications for volcanic surveillance in the island of Tenerife, Canary Islands, Spain

International Nuclear Information System (INIS)

Vinas, Ronaldo; Eff-Darwich, Antonio; Soler, Vicente; Martin-Luis, Maria C.; Quesada, Maria L.; Nuez, Julio de la

2007-01-01

The analysis of temporal and spatial variations in the flux of soil gases across the soil-air interface is a useful tool to study geo-dynamical processes associated with volcanic and/or seismic activity. However, many of these variations are induced by external variables, such as temperature, barometric pressure, rainfall and other meteorological variables. In an attempt to filter out non-endogenous variations in the emissions of gases, the optimal choice of the monitoring sites with numerical filtering techniques based on multi-variate and frequency domain analysis of the time series for gaseous emissions were combined, in the case of radon ( 222 Rn). Monitoring sites are located in underground galleries in the volcanic island of Tenerife, Canary Islands, Spain. Since the effect of wind, rainfall and temperature variations are very small inside galleries, a first natural filtering process of external parameters in the emissions of gases was achieved. This new approach has been successfully tested and as a result, the background level for radon emissions at various locations has been defined, by which correlations between gaseous emissions and the volcanic and/or seismic activity could be carried out

Programa de detección precoz de la Diabetes Tipo 2 en el Cabildo Insular de Tenerife.

Directory of Open Access Journals (Sweden)

Carlos Manuel Reyes González

2012-12-01

135 mg/dl.- De los empleados con valores de glucemia capilar alterados (34, el 52,94% (18 se les realizó un seguimiento posterior en consulta y el 47,06% (16 se les citó pero no acudieron. Conclusión principal:- Antes de realizar el Programa, los datos sobre valores alterados de glucemia en sangre de los empleados de la Corporación obtenidos a través de las analíticas realizadas en los reconocimientos médicos de los últimos 3 años (2009-2011 fue de un 6,65%. Éste fue el dato que esperábamos obtener en el Programa pero se obtuvo el 24,81%. Este aumento significativo se podría relacionar con la mayor sensibilidad de los participantes sobre la Diabetes, aunque cabe destacar que los empleados con valores de glucemia capilar alterados en un principio, solamente el 5,55% obtuvo valores de glucemia capilar alterados en posteriores seguimientos. Early detection Program of Type 2 diabetes in the Cabildo Insular of TenerifeAbstract: Health promotion in the workplace has become a mainstay for the Cabildo Insular of Tenerife’s prevention services personnel as an instrument to qualify the employees to take care of their health. For this and considering Diabetes Mellitus epidemiology in the Canary Islands, where it is estimated that there is a prevalence of 6.5% in the population of 30-64 years, we developed and implemented the World Diabetes Day Program. It consists of the capillary blood glucose measurement, the Findrisk test (it evaluates the risk of type 2 diabetes throughout the life and the delivery of information on diabetes prevention and treatment, with the objective of raising awareness of this epidemic to all employees. Moreover, our aim is to detect subjects with blood glucose altered in order to refer them to a specialist and control them and also monitor, in our surgeries, those employees who had a high or very high test result. Objective: To inform the Cabildo Insular of Tenerife’s employees about Diabetes. To sensitize of the magnitude of the public

Mixed Waste Integrated Program: A technology assessment for mercury-containing mixed wastes

International Nuclear Information System (INIS)

Perona, J.J.; Brown, C.H.

1993-03-01

The treatment of mixed wastes must meet US Environmental Protection Agency (EPA) standards for chemically hazardous species and also must provide adequate control of the radioactive species. The US Department of Energy (DOE) Office of Technology Development established the Mixed Waste Integrated Program (MWIP) to develop mixed-waste treatment technology in support of the Mixed Low-Level Waste Program. Many DOE mixed-waste streams contain mercury. This report is an assessment of current state-of-the-art technologies for mercury separations from solids, liquids, and gases. A total of 19 technologies were assessed. This project is funded through the Chemical-Physical Technology Support Group of the MWIP

TRUPACT-II Container Maintenance Program Plan

International Nuclear Information System (INIS)

1991-05-01

This document details the maintenance, repair, and replacement of components, as well as the documentation required and the procedures to be followed to maintain the integrity of the TRUPACT-II container in accordance with OM-134, TRUPACT-II Container Operations and Maintenance Manual; and the TRUPACT-II Container Certificate of Compliance (Number 9218). The routine shipping and receiving inspections required by the Department of Transportation (DOT), Department of Energy (DOE), Nuclear Regulatory Commission (NRC) and other regulations are not addressed in this document. This document applies to all DOE shipping and receiving sites that use the TRUPACT-II containers

Effect of fly ash from a fuel oil power station on heavy metal content of wild plants at Tenerife island, the Canarian archipelago, Spain

International Nuclear Information System (INIS)

Alvarez, C.E.; Fernandez, M.; Iglesias, E.; Perez, N.; Snelling, R.

1993-01-01

Heavy metal analysis have been carried out in wild plants around a Power Station located at the southeastern area of Tenerife Island (Canary Islands, Spain). The concentrations of Fe, Ni, and V in the leaves and terminal stems of three wild plants (Euphorbia obtusifolia, Kleinia neriifolia, and Plocama pendula) which were collected during the spring of 1988 are reported from four different allotments. These sampling sites were located at distances of 0.4, 1, 1, 25, and 34 km from the Electric Generating Facility, and at elevations of 60, 120, 180 and 60 m, respectively. Results show a potential contamination of vanadium in E. obtusifolia and P. pendula plants located close to the Power Station, probably due to dry deposition on fly ash in the surrounding area. The levels of iron and nickel concentrations in the same type of plants did not show any geographical relationship with respect to the location of the Power Station. 19 refs., 4 figs

Quantification of ozone uptake at the stand level in a Pinus canariensis forest in Tenerife, Canary Islands: An approach based on sap flow measurements

International Nuclear Information System (INIS)

Wieser, Gerhard; Luis, Vanessa C.; Cuevas, Emilio

2006-01-01

Ozone uptake was studied in a pine forest in Tenerife, Canary Islands, an ecotone with strong seasonal changes in climate. Ambient ozone concentration showed a pronounced seasonal course with high concentrations during the dry and warm period and low concentrations during the wet and cold season. Ozone uptake by contrast showed no clear seasonal trend. This is because canopy conductance significantly decreased with soil water availability and vapour pressure deficit. Mean daily ozone uptake averaged 1.9 nmol m -2 s -1 during the wet and cold season, and 1.5 nmol m -2 s -1 during the warm and dry period. The corresponding daily mean ambient ozone concentrations were 42 and 51 nl l -1 , respectively. Thus we conclude that in Mediterranean type forest ecosystems the flux based approach is more capable for risk assessment than an external, concentration based approach. - Sap flow measurements can be used for estimating ozone uptake at the stand level and for parameterisation of O 3 uptake models

Program to develop analytical tools for environmental and safety assessment of nuclear material shipping container systems

International Nuclear Information System (INIS)

Butler, T.A.

1978-11-01

This paper describes a program for developing analytical techniques to evaluate the response of nuclear material shipping containers to severe accidents. Both lumped-mass and finite element techniques are employed to predict shipping container and shipping container-carrier response to impact. The general impact problem is computationally expensive because of its nonlinear, three-dimensional nature. This expense is minimized by using approximate models to parametrically identify critical cases before more exact analyses are performed. The computer codes developed for solving the problem are being experimentally substantiated with test data from full-scale and scale-model container drop tests. 6 figures, 1 table

CONTEMPT-LT/028: a computer program for predicting containment pressure-temperature response to a loss-of-coolant accident

International Nuclear Information System (INIS)

Hargroves, D.W.; Metcalfe, L.J.; Wheat, L.L.; Niederauer, G.F.; Obenchain, C.F.

1979-03-01

CONTEMPT-LT is a digital computer program, written in FORTRAN IV, developed to describe the long-term behavior of water-cooled nuclear reactor containment systems subjected to postulated loss-of-coolant accident (LOCA) conditions. The program calculates the time variation of compartment pressures, temperatures, mass and energy inventories, heat structure temperature distributions, and energy exchange with adjacent compartments. The program is capable of describing the effects of leakage on containment response. Models are provided to describe fan cooler and cooling spray engineered safety systems. An annular fan model is also provided to model pressure control in the annular region of dual containment systems. Up to four compartments can be modeled with CONTEMPT-LT, and any compartment except the reactor system may have both a liquid pool region and an air--vapor atmosphere region above the pool. Each region is assumed to have a uniform temperature, but the temperatures of the two regions may be different

An overview of the CILBO spectral observation program

Science.gov (United States)

Rudawska, R.; Zender, J.; Koschny, D.

2016-01-01

The video equipment can be easily adopted with a spectral grating to obtain spectral information from meteors. Therefore, in recent years spectroscopic observations of meteors have become quite popular. The Meteor Research Group (MRG) of the European Space Agency has been working on upgrating the analysis of meteor spectra as well, operating image-intensified camera with objective grating (ICC8). ICC8 is located on Tenerife station of the double-station camera setup CILBO (Canary Island Long-Baseline Observatory). The pipeline software processes data with the standard calibration procedure (dark current, flat field, lens distortion corrections). While using the position of a meteor recorded by ICC7 camera (zero order), the position of the 1st order spectrum as a function of wavelength is computed Moreover, thanks to the double meteor observations carried by ICC7 (Tenerife) and ICC9 (La Palma), trajectory of a meteor and its orbit is determined. Which merged with simultaneously measurement of meteor spectrum from ICC8, allow us to identify the source of the meteoroid. Here, we report on preliminary results from a sample of meteor spectra collected by CILBO-ICC8 camera since 2012.

Las tipologías arquitectónicas en el centro histórico de Garachico. Tenerife

Directory of Open Access Journals (Sweden)

Sebastián A. Hernández Guitérrez

2013-10-01

Full Text Available El presente artículo formó parte, en su día, de la memoria documental presentada en el documento oficial Plan Especial de Protec­ción del Conjunto Histórico de Garachico, que firmó el arquitecto Vicente de Andrés Mosque­ra bajo la tutela de la empresa Gesplan SAU. En el mismo se desarrollan las tipo­logías arquitectónicas presentes en la Villa y Puerto de esta localidad del norte de la isla de Tenerife. El interés del mismo está en la valoración monumental que se hace de la arquitectura construida a lo largo de la exis­tencia de este núcleo urbano, sin despreciar ningún tipo de elemento, que conforma uno de los centros históricos más ricos, desde la pers­pectiva patrimonial, de las Islas Canarias.The present article formed, in its day, part of the documental history presented in the official document of the Special Plan of the Protection of Garachico´s Historial Heritage, which was signed by the architect Vicente de Andrés Mosquera under the tutorage of the firm Gesplan SAU. In this article, architectural typologies can be appreciated in the town and harbour of this locality in the north of the island of Te­nerife.The principal interest in this place is the wholehearted appreciation of the value of the architecture developed throughout the exis­tence of this town, whilst never overlooking any type of element which shapes one of the richests historic centres of the Canary Islands.

Quantification of ozone uptake at the stand level in a Pinus canariensis forest in Tenerife, Canary Islands: An approach based on sap flow measurements

Energy Technology Data Exchange (ETDEWEB)

Wieser, Gerhard [Division of Alpine Timberline Ecophysiology, Federal Research and Training Centre for Forests, Natural Hazards and Landscape, Rennweg 1, A-6020 Innsbruck (Austria)]. E-mail: gerhard.wieser@uibk.ac.at; Luis, Vanessa C. [Department of Plant Biology, Plant Physiology, University of La Laguna, Avda. Astrofisico Francisco Sanchez s/n, E-38207 La Laguna, Tenerife (Spain); Cuevas, Emilio [Izana Atmospheric Observatory, National Institute of Meteorology, La Marina, E-38071 Santa Cruz de Tenerife (Spain)

2006-04-15

Ozone uptake was studied in a pine forest in Tenerife, Canary Islands, an ecotone with strong seasonal changes in climate. Ambient ozone concentration showed a pronounced seasonal course with high concentrations during the dry and warm period and low concentrations during the wet and cold season. Ozone uptake by contrast showed no clear seasonal trend. This is because canopy conductance significantly decreased with soil water availability and vapour pressure deficit. Mean daily ozone uptake averaged 1.9 nmol m{sup -2} s{sup -1} during the wet and cold season, and 1.5 nmol m{sup -2} s{sup -1} during the warm and dry period. The corresponding daily mean ambient ozone concentrations were 42 and 51 nl l{sup -1}, respectively. Thus we conclude that in Mediterranean type forest ecosystems the flux based approach is more capable for risk assessment than an external, concentration based approach. - Sap flow measurements can be used for estimating ozone uptake at the stand level and for parameterisation of O{sub 3} uptake models.

Mark I containment long-term program safety evaluation report, resolution of generic technical activity A-7. Report for February 1977-December 1979

International Nuclear Information System (INIS)

1980-07-01

During testing for an advanced Boiling Water Reactor (BWR) containment system design (Mark III), suppression pool hydrodynamic loads were identified which had not been considered in the original design of the Mark I containment system. To address this issue, a Mark I Owners Group was formed and the assessment was divided into a short-term and long-term program. The results of the NRC staff's review of the Mark I Containment Short Term Program are described in NUREG-0408. This report describes the results of the NRC staff's review of the generic Mark I Containment Long Term Program (LTP). The LTP was conducted to provide a generic basis to define suppression pool hydrodynamic loads and the related structural acceptance criteria, such that a comprehensive reassessment of each Mark I containment system would be performed. A series of experimental and analytical programs were conducted by the Mark I Owners Group to provide the necessary bases for the generic load definition and structural assessment techniques. The generic methods proposed by the Mark I Owners Group, as modified by the NRC staff's requirements, will be used to perform plant-unique analyses, which will identify the plant modifications, if any, that will be needed to restore the originally intended margin of safety in the Mark I containment designs

A Monte Carlo program to calculate the exposure rate from airborne radioactive gases inside a nuclear reactor containment building.

Science.gov (United States)

Sherbini, S; Tamasanis, D; Sykes, J; Porter, S W

1986-12-01

A program was developed to calculate the exposure rate resulting from airborne gases inside a reactor containment building. The calculations were performed at the location of a wall-mounted area radiation monitor. The program uses Monte Carlo techniques and accounts for both the direct and scattered components of the radiation field at the detector. The scattered component was found to contribute about 30% of the total exposure rate at 50 keV and dropped to about 7% at 2000 keV. The results of the calculations were normalized to unit activity per unit volume of air in the containment. This allows the exposure rate readings of the area monitor to be used to estimate the airborne activity in containment in the early phases of an accident. Such estimates, coupled with containment leak rates, provide a method to obtain a release rate for use in offsite dose projection calculations.

Program plan for the investigation of vent-filtered containment conceptual designs for light water reactors

International Nuclear Information System (INIS)

Benjamin, A.S.

1979-10-01

The implementation of a containment venting and filtration capability has been suggested as a means for reducing the risk from fuel melt accidents in light water reactors. The risk reduction potential of such systems depends upon the dual function of venting containment to prevent overpressurization from the generation of steam and noncondensibles and filtering the effluent to limit the release of radioactive materials. This report addresses the major issues involved in such an accident mitigation system and discusses the engineering, technical, and economic questions that will have to be studied before judgments can be made regarding feasibility and effectiveness. A program plan is presented for research leading to the formulation of design requirements for vent-filter containment systems and to a comprehensive assessment of the values versus impacts of such systems

Zagreb and Tenerife: Airline Accidents Involving Linguistic Factors

Science.gov (United States)

Cookson, Simon

2009-01-01

The International Civil Aviation Organization (ICAO) is currently implementing a program to improve the language proficiency of pilots and air traffic controllers worldwide. In justifying the program, ICAO has cited a number of airline accidents that were at least partly caused by language factors. Two accidents cited by ICAO are analysed in this…

Containment bellows testing under extreme loads

International Nuclear Information System (INIS)

Splezter, B.L.; Lambert, L.D.; Parks, M.B.

1993-01-01

Sandia National Laboratories (SNL) is conducting several research programs to help develop validated methods for the prediction of the ultimate pressure capacity, at elevated temperatures, of light water reactor (LWR) containment structures. To help understand the ultimate pressure of the entire containment pressure boundary, each component must be evaluated. The containment pressure boundary consists of the containment shell and many access, piping, and electrical penetrations. The focus of the current research program is to study the ultimate behavior of flexible metal bellows that are used at piping penetrations. Bellows are commonly used at piping penetrations in steel containments; however, they have very few applications in concrete (reinforced or prestressed) containments. The purpose of piping bellows is to provide a soft connection between the containment shell and the pipe are attached while maintaining the containment pressure boundary. In this way, piping loads caused by differential movement between the piping and the containment shell are minimized. SNL is conducting a test program to determine the leaktight capacity of containment bellows when subjected to postulated severe accident conditions. If the test results indicate that containment bellows could be a possible failure mode of the containment pressure boundary, then methods will be developed to predict the deformation, pressure, and temperature conditions that would likely cause a bellows failure. Results from the test program would be used to validate the prediction methods. This paper provides a description of the use and design of bellows in containment piping penetrations, the types of possible bellows loadings during a severe accident, and an overview of the test program, including available test results at the time of writing

Weapon container catalog. Volumes 1 & 2

Energy Technology Data Exchange (ETDEWEB)

Brown, L.A.; Higuera, M.C.

1998-02-01

The Weapon Container Catalog describes H-gear (shipping and storage containers, bomb hand trucks and the ancillary equipment required for loading) used for weapon programs and for special use containers. When completed, the catalog will contain five volumes. Volume 1 for enduring stockpile programs (B53, B61, B83, W62, W76, W78, W80, W84, W87, and W88) and Volume 2, Special Use Containers, are being released. The catalog is intended as a source of information for weapon program engineers and also provides historical information. The catalog also will be published on the SNL Internal Web and will undergo periodic updates.

Evolutive and regressive soil sequences for characterization of soils in laurel forest (Tenerife, Canary Islands

Directory of Open Access Journals (Sweden)

José Asterio Guerra-García

2014-03-01

Full Text Available Soil degradation processes have achieved the recognition of a global environmental problem in recent years. It has been suggested by various international forums and organizations that in order to adequately establish methods to combat land degradation, it is necessary to evaluate this degradation locally and at a detailed scale. The evaluation of soil degradation of natural ecosystems at a detailed scale requires the definition of standards to which to compare this degradation. To define these standards and properly handle the processes that give rise to variations in soil quality and degradation, it is necessary to establish in some detail the pedogenic processes that have or have not taken place in a particular area and which lead to the formation of a mature soil. A mature soil should be considered as standard in these situations and, therefore, a non-degraded soil. This paper presents the possible evolutive and regressive sequences of soil, and provides some examples of using this methodology to evaluate the degradation of the same in the Monteverde of the island of Tenerife. It also presents some physical, chemical and mineralogical properties of climacic mature soils, degraded soils and low quality soils, and examines their similarities and differences in this bioclimatic environment and on different parent materials. Thus it is observed that the main processes of degradation in these areas are related to plant cover modifications that lead to the decreasing protection of the soil surface, which results in the long term, in the onset of degradation processes such as water erosion, biological degradation, loss of andic properties, compaction and sealing and crusting surface, loss of water retention capacity, illuviation, etc. Climacic soils that can be found in areas of steep lava flows are Leptosols, while gently sloping areas are Cambisols and Andosols. On pyroclastic materials there are vitric Andosols and andic Andosols according to

Changes in Al and Fe associated with amorphous soil minerals over one year after a wildfire at Pico Cho Marcial (Tenerife, Canary Islands, Spain

Directory of Open Access Journals (Sweden)

J. Notario

2013-05-01

Full Text Available Amorphous-linked Al, Fe and Si were determined both in burned and unburnt soil samples after a wildfire close to Pico Cho Marcial (Tenerife, Canary Islands, Spain that affected 7.1 ha of high mountain Teide broom scrub along four successive samplings held in September 2003 (three months after the wildfire, February 2004, June 2004 and October 2004. Soils in the area are Lithic Xerorthents, with a scarcely developed AC-type profile. The chemical elements under study were extracted using selective dissolutions (0.2M acid ammonium oxalate and 0.1N sodium pyrophosphate, and determined by Atomic Absorption Spectrophotometry. The average contents of total amorphous Al (oxalate-extractable and organo-metallic complexes-bound Al (pyrophosphate extractable were significantly higher in burned samples along the study. Also, the oxalate-extractable Al varied significantly along the different samplings, and so consequently did the Alp:Alox ratio. A progressive decrease in the Al:Si ratio in allophanes was also found throughout the study period. No differences were found for oxalate-extractable Fe, either between sample groups or samplings, which was also applicable to the (Alox+0.5Feox percentage.

Presencia de Giardia lamblia y Cryptosporidium spp. en aguas residuales depuradas reutilizadas para riego agrícola en la isla de Tenerife, España. Efectos del transporte a larga distancia sobre la calidad del agua reutilizada

Directory of Open Access Journals (Sweden)

N. Abreu Acosta

2002-06-01

Full Text Available El empleo de aguas residuales depuradas para riego agrícola es la alternativa de reutilización con más relevancia hoy día, siempre y cuando se desarrolle con garantías sanitarias y medioambientales.Giardia lamblia y Cryptosporidium spp. son dos protozoos patógenos entéricos de amplia distribución ambiental, frecuentes en hábitats acuáticos. La investigación y detección de estos parásitos en aguas ha adquirido importancia en los últimos años debido a que poseen formas de dispersión resistentes a los tratamientos habituales, aplicados tanto en procesos de potabilización como de depuración, y a que han sido clasificados como patógenos emergentes causantes de importantes brotes de transmisión hídrica.En este trabajo se estudia la presencia de quistes de Giardia lamblia y ooquistes de Cryptosporidium spp. en el agua residual depurada de la ciudad de Santa Cruz de Tenerife que es transportada hasta el sur de la isla de Tenerife para su reutilización en agricultura. Asimismo se investiga el efecto del transporte, el almacenamiento y el tratamiento avanzado sobre la concentración de quistes y ooquistes a través del sistema, y la existencia de relaciones con otros parámetros bacteriológicos y físico-químicos.Los resultados obtenidos ponen de manifiesto comportamientos variables de los contenidos en quistes y ooquistes frente a los tratamientos aplicados, y el efecto depurador que el transporte a larga distancia, parece tener sobre el agua residual depurada.No se han encontrado relaciones entre las concentraciones de quistes y ooquistes en el agua residual depurada y el contenido de los indicadores tradicionales de contaminación fecal.

CONTAIN code analyses of direct containment heating experiments

International Nuclear Information System (INIS)

Williams, D.C.; Griffith, R.O.; Tadios, E.L.; Washington, K.E.

1995-01-01

In some nuclear reactor core-melt accidents, a potential exists for molten core-debris to be dispersed into the containment under high pressure. Resulting energy transfer to the containment atmosphere can pressurize the containment. This process, known as direct containment heating (DCH), has been the subject of extensive experimental and analytical programs sponsored by the U.S. Nuclear Regulatory Commission (NRC). The DCH modeling has been an important focus for the development of the CONTAIN code. Results of a detailed independent peer review of the CONTAIN code were published recently. This paper summarizes work performed in support of the peer review in which the CONTAIN code was applied to analyze DCH experiments. Goals of this work were comparison of calculated and experimental results, CONTAIN DCH model assessment, and development of guidance for code users, including development of a standardized input prescription for DCH analysis

Increased water use efficiency does not prevent growth decline of Pinus canariensis in a semi-arid treeline ecotone in Tenerife, Canary Islands (Spain).

Science.gov (United States)

Brito, Patricia; Grams, Thorsten E E; Matysssek, Rainer; Jimenez, Maria S; Gonzalez-Rodríguez, Agueda M; Oberhuber, Walter; Wieser, Gerhard

2016-09-01

Intrinsic water-use efficiency of Pinus canariensis (Sweet ex Spreng.) growing at a semi-arid treeline has increased during the past 37 years. Tree-ring width by contrast has declined, likely caused by reduced stomatal conductance due to increasing aridity. Rising atmospheric CO 2 concentration ( C a ) has been related to tree growth enhancement accompanied by increasing intrinsic water-use-efficiency (iWUE). Nevertheless, the extent of rising C a on long-term changes in iWUE and growth has remained poorly understood to date in Mediterranean treeline ecosystems. This study aimed to examine radial growth and physiological responses of P. canariensis in relation to rising C a and increasing aridity at treeline in Tenerife, Canary Islands, Spain. We evaluated temporal changes in secondary growth (tree-ring width; TRW) and tree ring stable C isotope signature for assessing iWUE from 1975 through 2011. Precipitation was the main factor controlling secondary growth. Over the last 36 years P. canariensis showed a decline in TRW at enhanced iWUE, likely caused by reduced stomatal conductance due to increasing aridity. Our results indicate that increasing aridity has overridden the potential CO 2 fertilization on tree growth of P. canariensis at its upper distribution limit.

Aerosol in the containment

International Nuclear Information System (INIS)

Lanza, S.; Mariotti, P.

1986-01-01

The US program LACE (LWR Aerosol Containment Experiments), in which Italy participates together with several European countries, Canada and Japan, aims at evaluating by means of a large scale experimental activity at HEDL the retention in the pipings and primary container of the radioactive aerosol released following severe accidents in light water reactors. At the same time these experiences will make available data through which the codes used to analyse the behaviour of the aerosol in the containment and to verify whether by means of the codes of thermohydraulic computation it is possible to evaluate with sufficient accuracy variable influencing the aerosol behaviour, can be validated. This report shows and compares the results obtained by the participants in the LACE program with the aerosol containment codes NAVA 5 and CONTAIN for the pre-test computations of the test LA 1, in which an accident called containment by pass is simulated

¿Desaparecerán los Tour Operadores? El papel de los intermediarios en la distribución turística: Análisis del caso de Tenerife

Directory of Open Access Journals (Sweden)

Davinia Flores Alberto

2011-01-01

Full Text Available En los últimos años diversos autores han planteado el fin de la intermediación turística. Dado que Internet permite la comunicación efectiva entre proveedores de servicios turísticos y clientes geográficamente distantes, cada vez sería menor el porcentaje de personas que recurrirían a intermediarios para organizar sus viajes. Otros autores afirman que el impacto de las nuevas tecnologías puede no ser la desintermediación, sino el cambio en la intermediación, en función de factores como la cercanía cultural entre turista y destino. En este trabajo se ha analizado el caso de Tenerife (España y se ha encontrado que el uso de los intermediarios aún sigue siendo ampliamente mayoritario. Por ello, se plantea que factores asociados a la estructura de los mercados turísticos, frecuentemente poco considerados, pueden estar influyendo en la configuración de la distribución turística.

Verifying the body tide at the Canary Islands using tidal gravimetry observations

Science.gov (United States)

Arnoso, J.; Benavent, M.; Bos, M. S.; Montesinos, F. G.; Vieira, R.

2011-05-01

Gravity tide records from El Hierro, Tenerife and Lanzarote Islands (Canarian Archipelago) have been analyzed and compared to the theoretical body tide model (DDW) of Dehant el al. (1999). The use of more stringent criterion of tidal analysis using VAV program allowed us to reduce the error bars by a factor of two of the gravimetric factors at Tenerife and Lanzarote compared with previous published values. Also, the calibration values have been revisited at those sites. Precise ocean tide loading (OTL) corrections based on up-to-date global ocean models and improved regional ocean model have been obtained for the main tidal harmonics O 1, K 1, M 2, S 2. We also point out the importance of using the most accurate coastline definition for OTL calculations in the Canaries. The remaining observational errors depend on the accuracy of the calibration of the gravimeters and/or on the length of the observed data series. Finally, the comparison of the tidal observations with the theoretical body tide models has been done with an accuracy level of 0.1% at El Hierro, 0.4% at Tenerife and 0.5% at Lanzarote.

The Container Stowage Problem

DEFF Research Database (Denmark)

Janstrup, Kira; Rose, Trine Høyer; Andersen, Kent Høj

The main purpose of this project is to use integer programming to create a model that minimizes the costs for container transportation by ship. To make the model as realistic as possible it will be based on information from a large shipping company about the vessel layout and container types....... In addition to our project two other projects are made where an optimal solution to the container stowage problem also is tried to be found, but by using constraint programming and local search instead respectively. We will therefore in the end compare these three methods and the achieved results on fastness...

The Container Stowage Problem

DEFF Research Database (Denmark)

Janstrup, Kira

2010-01-01

The main purpose of this project is to use integer programming to create a model that minimizes the costs for container transportation by ship. To make the model as realistic as possible it will be based on information from a large shipping company about the vessel layout and container types....... In addition to our project two other projects are made where an optimal solution to the container stowage problem also is tried to be found, but by using constraint programming and local search instead respectively. We will therefore in the end compare these three methods and the achieved results on fastness...

FAUST/CONTAIN

International Nuclear Information System (INIS)

Cherdron, W.; Minges, J.; Sauter, H.; Schuetz, W.

1995-01-01

The FAUNA facility has been restructured after completion of the sodium fire experiments. It is now serving LWR research, cf. report II on program no. 32.21.02 concerning steam explosions. The CONTAIN code system for computing the thermodynamic, aerosol and radiological phenomena in a containment under severe accident conditions is being developed with a new to fission product release and transport. (orig.)

TRUPACT-II container maintenance program plan

International Nuclear Information System (INIS)

1990-01-01

This document details the maintenance/repair and replacement of components, as well as the documentation required and the procedures to be followed to maintain the integrity of the TRUPACT-II container

Changing eruptive styles and textural features from phreatomagmatic to strombolian activity of basaltic littoral cones: Los Erales cinder cone, Tenerife, Canary Islands

Directory of Open Access Journals (Sweden)

Gould, R.

2005-12-01

Full Text Available Montaña Los Erales is a 70 m high Quaternary cinder cone in the Bandas del Sur region, south Tenerife. Field observations on excavated sections and SEM analysis of tephra samples from the cone suggest that the eruption style of this vent changed progressively from an initial hydrovolcanic phase, through a transitional stage, to one that was entirely strombolian. Clast sizes increase from ≤1 cm angular lapilli in hydrovolcanic samples to 15 cm bombs in strombolian samples. Vesicles also increase in size from 0.5 mm to 1.2 mm, becoming more rounded in the strombolian samples. Palagonitization, extensive in the hydrovolcanic deposits, becomes less noticeable in strombolian deposits. To investigate the causes for and the nature of these changes in eruptive style, products from each major unit were analysed for their morphology, using scanning electron microscopy with both SE and BSE imaging as tephra morphologies are known to reflect the eruptive regime and degree of explosivity at the time of eruption. SEM imaging of hydrovolcanic samples illustrate angular fragments that have been rapidly quenched and contain high levels of palagonitisation and zeolitisation, whereas strombolian samples appear to be less altered and display larger clast sizes and vesicles. Our results confirm that the initial phase of activity was largely driven by magma-water (coolant interaction, where magma may have interacted with a lens of fresh ground or surface water, causing intense fragmentation of the magma. With proceeding eruptive activity the water became exhausted, giving rise to an entirely strombolian eruptive style. Additionally, fossil diatoms were found in hydrovolcanic samples, further emphasising the influence of a, probably fluvial, water source during the early phase of emplacement.La Montaña de Los Erales es un cono de cínder del Cuaternario de 70 m de altura situado en la zona de las Bandas del Sur, en el litoral meridional de la isla de

Definition of containment issues

International Nuclear Information System (INIS)

Walker, D.H.

1982-01-01

Public Law 96-567 Nuclear Safety Research, Development and Demonstration Act of 1980, directed the US Department of Energy (DOE) to provide an accelerated and coordinated program for developing practical generic improvements that would enhance the capability for safe, reliable and economical operation of Light Water Nuclear Reactor Power Stations. The DOE approach to defining such a program will consist of two phases, (1) definition of program requirements and (2) implementation of the program plan. This paper summarizes the results of the program definition phase for the containment integrity function. The definition phase effort was carried out by two groups of knowledgeable technical experts from the nuclear industry, one of which addressed containment integrity. Tabulated in the paper are the issues identified by the working groups and their associated priorities. Also tabulated are those high priority issues for which ongoing programs do not appear to provide sufficient information to resolve the issue. The results of this review show that existing programs to a great extent address existing issues in a manner such that the issues should be resolved by the programs

Outcome evaluation of a community center-based program for mothers at high psychosocial risk.

Science.gov (United States)

Rodrigo, María José; Máiquez, María Luisa; Correa, Ana Delia; Martín, Juan Carlos; Rodríguez, Guacimara

2006-09-01

This study reported the outcome evaluation of the "Apoyo Personal y Familiar" (APF) program for poorly-educated mothers from multi-problem families, showing inadequate behavior with their children. APF is a community-based multi-site program delivered through weekly group meetings in municipal resource centers. A total of 340 mothers referred by the municipal social services of Tenerife, Spain were assessed; 185 mothers participated in the APF program that lasted 8 months, and 155 mothers were in the control group. Pre-post test comparisons for the intervention group and post-test comparisons with the control group on self-rating measures of maternal beliefs, personal agency and child-rearing practices were performed. Multivariate tests, t tests and effect sizes (ES) were calculated to determine the program effectiveness on the outcome measures. Mothers' support of nurturist and nativist beliefs and the reported use of Neglect-permissive and Coercive practices significantly decreased after program completion whereas the reported use of Inductive practices significantly increased. Increases in self-efficacy, internal control and role difficulty were also significant in relation to those of the control group. The program was especially effective for older mothers, with fewer children, living in a two-parent family, in urban areas and with either low or medium educational levels. The program was very effective in changing the mothers' perceived competences and modestly effective in changing their beliefs about child development and education and reported child-rearing practices. Changes in personal agency are very important for at-risk parents who feel helpless and with no control over their lives.

Containment vessel stability analysis

International Nuclear Information System (INIS)

Harstead, G.A.; Morris, N.F.; Unsal, A.I.

1983-01-01

The stability analysis for a steel containment shell is presented herein. The containment is a freestanding shell consisting of a vertical cylinder with a hemispherical dome. It is stiffened by large ring stiffeners and relatively small longitudinal stiffeners. The containment vessel is subjected to both static and dynamic loads which can cause buckling. These loads must be combined prior to their use in a stability analysis. The buckling loads were computed with the aid of the ASME Code case N-284 used in conjunction with general purpose computer codes and in-house programs. The equations contained in the Code case were used to compute the knockdown factors due to shell imperfections. After these knockdown factors were applied to the critical stress states determined by freezing the maximum dynamic stresses and combining them with other static stresses, a linear bifurcation analysis was carried out with the aid of the BOSOR4 program. Since the containment shell contained large penetrations, the Code case had to be supplemented by a local buckling analysis of the shell area surrounding the largest penetration. This analysis was carried out with the aid of the NASTRAN program. Although the factor of safety against buckling obtained in this analysis was satisfactory, it is claimed that the use of the Code case knockdown factors are unduly conservative when applied to the analysis of buckling around penetrations. (orig.)

Tension tests of concrete containment wall elements

International Nuclear Information System (INIS)

Schultz, D.M.; Julien, J.T.; Russel, H.G.

1984-01-01

Tension tests of concrete containment wall elements were conducted as part of a three-phase research program sponsored by the Electric Power Research Institute (EPRI). The objective of the EPRI experimental/analytical program is twofold. The first objective is to provide the utility industry with a test-verified analytical method for making realistic estimates of actual capacities of reinforced and prestressed concrete containments under internal over-pressurization from postulated degraded core accidents. The second objective is to determine qualitative and quantitative leak rate characteristics of typical containment cross-sections with and without penetrations. This paper covers the experimental portion to the EPRI program. The testing program for Phase 1 included eight large-scale specimens representing elements from the wall of a containment. Each specimen was 60-in (1525-mm) square, 24-in (610-mm) thick, and had full-size reinforcing bars. Six specimens were representative of prototypical reinforced concrete containment designs. The remaining two specimens represented prototypical prestressed containment designs. Various reinforcement configurations and loading arrangements resulted in data that permit comparisons of the effects of controlled variables on cracking and subsequent concrete/reinforcement/liner interaction in containment elements. Subtle differences, due to variations in reinforcement patterns and load applications among the eight specimens, are being used to benchmark the codes being developed in the analytical portion of the EPRI program. Phases 2 and 3 of the test program will examine leak rate characteristics and failure mechanisms at penetrations and structural discontinuities. (orig.)

Stowing the Right Containers on Container Vessels

DEFF Research Database (Denmark)

Jensen, Rune Møller

2014-01-01

’s largest container vessels using standard mathematical programming techniques and off-the-shelf solvers. The presentation will provide basic insight into the domain, with pointers to further information that enable you to join in this promising new path of operations research and business....

Structural controls on diffuse degassing in the Las Cañadas caldera, Tenerife, Canary Islands

Science.gov (United States)

Galindo, I.; Soriano, C.; Martí, J.; Pérez, N.

2003-04-01

The Las Cañadas caldera is an elliptical depression located in the central part of the Tenerife Island. The active Teide stratovolcano stands in the centre of the depression, which is limited to the south by the caldera wall, up to 500 m high above the caldera floor. Mapping most of the caldera wall at 1:5000 has provided new insights on its stratigraphy, structure, and geological evolution. Three major ENE-WSW normal faults have been mapped on the caldera wall in the area comprised between El Llano de Ucanca and Los Azulejos, where an intense hydrothermal alteration affects the lower stratigraphic levels of the caldera wall. Hydrothermal alteration is rather distinctive in this area, showing bluish to greenish colours. Most of the phonolitic cone sheets and radial dykes of the caldera wall do not show distinctive hydrothermal features, as do show the phonolitic pyroclastic rocks and lavas of the lower parts of the caldera wall. This suggests the main episodes of dyke intrusion in the Las Cañadas caldera postdate hydrothermal alteration. ENE-WSW normal faults involve dyke swarms and rocks of the upper stratigraphic levels of the caldera wall, and show displacements of up to 100 m. Unfortunately the upper possible age of these faults is poorly constrained since no contact relationship has been observed between fault planes and the rocks of the uppermost stratigraphic levels of the caldera wall. The rocks of the caldera wall adjacent to the faults are intensely fractured at the macro and mesoscale. In addition to field mapping, a soil gas survey was carried out at the caldera depression. Soil CO2 efflux and H2 concentration were measured reaching values of 12 gm-2d-1 and 4 ppmV, respectively. Spatial distribution of these species showed that positive anomalies coincide with the surface expression of the three major faults and their adjacent intensely fractured zone. The high CO2 and H2 values and their coincidence with major normal faults suggests that degassing in

A review of a radioactive material shipping container including design, testing, upgrading compliance program and shipping logistics

International Nuclear Information System (INIS)

Celovsky, A.; Lesco, R.; Gale, B.; Sypes, J.

2003-01-01

Ten years ago Atomic Energy of Canada developed a Type B(U)-85 shipping container for the global transport of highly radioactive materials. This paper reviews the development of the container, including a summary of the design requirements, a review of the selected materials and key design elements, and the results of the major qualification tests (drop testing, fire test, leak tightness testing, and shielding integrity tests). As a result of the testing, improvements to the structural, thermal and containment design were made. Such improvements, and reasons thereof, are noted. Also provided is a summary of the additional analysis work required to upgrade the package from a Type B(U) to a Type B(F), i.e. essentially upgrading the container to include fissile radioisotopes to the authorized radioactive contents list. Having a certified shipping container is only one aspect governing the global shipments of radioactive material. By necessity the shipment of radioactive material is a highly regulated environment. This paper also explores the experiences with other key aspects of radioactive shipments, including the service procedures used to maintain the container certification, the associated compliance program for radioactive material shipments, and the shipping logistics involved in the transport. (author)

BEACON/MOD2A: a computer program for subcompartment analysis of nuclear reactor containment. A user's manual

International Nuclear Information System (INIS)

Wells, R.A.

1979-03-01

The BEACON code is a Best Estimate Advanced Containment code which being developed by EG and G, Idaho, Inc., at the Idaho National Engineering Laboratory. The program is designed to perform a best estimate analysis of the flow of a mixture of air, water, and steam in a nuclear reactor containment system under loss-of-coolant accident conditions. The code can simulate two-component, two-phase fluid flow in complex geometries using a combination of two-dimensional, one-dimensional, and lumped-parameter representations for the various parts of the system. The current version of BEACON, which is designated BEACON/MOD2A, contains mass and heat transfer models for wall film and for wall conduction. It is suitable for the evaluation of short term transients in PWR dry containment systems. This manual describes the models employed in BEACON/MOD2A and specifies code implementation requirements. It provides application information for input data preparation and for output data interpretation

Diffuse CO2 flux emissions from the soil in Las Cañadas caldera (Tenerife, Canary Islands)

Science.gov (United States)

Luengo-Oroz, Natividad; Torres, Pedro A.; Moure, David; D'Alessandro, Walter; Liuzzo, Marco; Longo, Manfredi; Pecoraino, Giovannella

2014-05-01

Starting in April 2004, unusual seismic activity was observed in the interior of the island of Tenerife (Canary Islands, Spain) with much evidence pointing to a reawakening of volcanic activity. During this seismic crisis, several events were felt by the population. Since then, a dense multiparametric monitoring network has been deployed all over the island by Instituto Geográfico Nacional (IGN). In the framework of this volcanic surveillance project, several geochemical studies have been accomplished. Measurements of diffuse CO2 flux from the soil have been carried out in some zones inside Las Cañadas caldera. This study has been performed during three different field campaigns in November 2012 and June and November 2013. The studied area includes two different zones known as Roques de García and Los Azulejos. Since several authors have reported the existence of fractures and faults all along both structures, the objectives of this work were to find anomalous CO2 fluxes from the soil and preferential degassing areas, identify possible hidden faults and study the origin of gas emanations in order to detect the presence of magmatic sources. More than 600 sampling sites have been measured with the accumulation chamber method in an area of about 1 km2. Soil gas has been sampled in points where high CO2 fluxes were detected for the determination of chemical and isotopic composition. The results of the gas prospection confirm the existence of CO2 degassing in the area. Some anomalous fluxes have been measured along previously inferred volcano-tectonic structures. The highest anomalies were found in Los Azulejos with values up to 1774 g/m2.d. Chemical analysis did not reveal significant concentrations of magmatic or geothermal gases except CO2. The latter showed concentrations at 50 cm depth within the soils up to 48% and a C-isotopic composition between -4.72 and -3.67 o indicating a prevailing magmatic origin.

Diffuse CO2 degassing monitoring for the volcanic surveillance of Tenerife North-East Rift Zone (NERZ) volcano, Canary Islands

Science.gov (United States)

Rodríguez, F.; Thomas, G. E.; Wong, T.; García, E.; Melián, G.; Padron, E.; Asensio-Ramos, M.; Hernández, P. A.; Perez, N. M.

2017-12-01

The North East Rift zone of Tenerife Island (NERZ, 210 km2) is one of the three major volcanic rift-zones of the island. The most recent eruptive activity along the NERZ took place in the 1704-1705 period with eruptions of Siete Fuentes, Fasnia and Arafo volcanoes. Since fumarolic activity is nowadays absent at the NERZ, soil CO2 degassing monitoring represent a potential geochemical tool for its volcanic surveillance. The aim of this study is to report the results of the last CO2 efflux survey performed in June 2017, with 658 sampling sites. In-situ measurements of CO2 efflux from the surface environment of the NERZ were performed by means of a portable non-dispersive infrared spectrophotometer (NDIR) following the accumulation chamber method. To quantify the total CO2 emission, soil CO2 efflux spatial distribution maps were constructed using Sequential Gaussian Simulation (SGS) as interpolation method. The diffuse CO2 emission values ranged between 0 - 41.1 g m-2 d-1. The probability plot technique applied to the data allowed to distinguish two different geochemical populations; background (B) and peak (P) represented by 81.8% and 18.2% of the total data, respectively, with geometric means of 3.9 and 15.0 g m-2 d-1, respectively. The average map constructed with 100 equiprobable simulations showed an emission rate of 1,361±35 t d-1. This value relatively higher than the background average of CO2 emission estimated on 415 t d-1 and slightly higher than the background range of 148 t d-1 (-1σ) and 1,189 t d-1 (+1σ) observed at the NERZ. This study reinforces the importance of performing soil CO2 efflux surveys as an effective surveillance volcanic tool in the NERZ.

Identifying optimal regional solid waste management strategies through an inexact integer programming model containing infinite objectives and constraints.

Science.gov (United States)

He, Li; Huang, Guo-He; Zeng, Guang-Ming; Lu, Hong-Wei

2009-01-01

The previous inexact mixed-integer linear programming (IMILP) method can only tackle problems with coefficients of the objective function and constraints being crisp intervals, while the existing inexact mixed-integer semi-infinite programming (IMISIP) method can only deal with single-objective programming problems as it merely allows the number of constraints to be infinite. This study proposes, an inexact mixed-integer bi-infinite programming (IMIBIP) method by incorporating the concept of functional intervals into the programming framework. Different from the existing methods, the IMIBIP can tackle the inexact programming problems that contain both infinite objectives and constraints. The developed method is applied to capacity planning of waste management systems under a variety of uncertainties. Four scenarios are considered for comparing the solutions of IMIBIP with those of IMILP. The results indicate that reasonable solutions can be generated by the IMIBIP method. Compared with IMILP, the system cost from IMIBIP would be relatively high since the fluctuating market factors are considered; however, the IMILP solutions are associated with a raised system reliability level and a reduced constraint violation risk level.

Production of vegetation samples containing radionuclides gamma emitters to attend the interlaboratory programs

International Nuclear Information System (INIS)

Souza, Poliana Santos de

2016-01-01

The production of environmental samples such as soil, sediment, water and vegetation with radionuclides for intercomparison tests is a very important contribution to environmental monitoring. Laboratories that carry out such monitoring need to demonstrate that their results are reliable. The IRD National Intercomparison Program (PNI) produces and distributes environmental samples containing radionuclides used to check the laboratories performance. This work demonstrates the feasibility of producing vegetation (grass) samples containing 60 Co, 65 Zn, 134 Cs, and 137 Cs by the spike sample method for the PNI. The preparation and the statistical tests followed the ISO guides 34 and 35 recommendations. The grass samples were dried, ground and passed through a sieve of 250 μm. 500 g of vegetation was treated in each procedure. Samples were treated by two different procedures:1) homogenizing of the radioactive solution containing vegetation by hand and drying in an oven and 2) homogenizing of the radioactive solution containing the vegetation in a rotatory evaporator and drying in an oven. The theoretical activity concentration of the radionuclides in the grass had a range of 593 Bq/kg to 683 Bq/kg. After gamma spectrometry analysis the results of both procedures were compared as accuracy, precision, homogeneity and stability. The accuracy, precision and short time stability from both methods were similar but the homogeneity test of the evaporation method was not approved for the radionuclides 60 Co and 134 Cs. Based on comparisons between procedures was chosen the manual agitation procedure for the grass sample for the PNI. The accuracy of the procedure, represented by the uncertainty and based on theoretical value had a range between -1.1 and 5.1% and the precision between 0.6 a 6.5 %. This result show is the procedure chosen for the production of grass samples for PNI. (author)

Direct containment heating models in the CONTAIN code

International Nuclear Information System (INIS)

Washington, K.E.; Williams, D.C.

1995-08-01

The potential exists in a nuclear reactor core melt severe accident for molten core debris to be dispersed under high pressure into the containment building. If this occurs, the set of phenomena that result in the transfer of energy to the containment atmosphere and its surroundings is referred to as direct containment heating (DCH). Because of the potential for DCH to lead to early containment failure, the U.S. Nuclear Regulatory Commission (USNRC) has sponsored an extensive research program consisting of experimental, analytical, and risk integration components. An important element of the analytical research has been the development and assessment of direct containment heating models in the CONTAIN code. This report documents the DCH models in the CONTAIN code. DCH models in CONTAIN for representing debris transport, trapping, chemical reactions, and heat transfer from debris to the containment atmosphere and surroundings are described. The descriptions include the governing equations and input instructions in CONTAIN unique to performing DCH calculations. Modifications made to the combustion models in CONTAIN for representing the combustion of DCH-produced and pre-existing hydrogen under DCH conditions are also described. Input table options for representing the discharge of debris from the RPV and the entrainment phase of the DCH process are also described. A sample calculation is presented to demonstrate the functionality of the models. The results show that reasonable behavior is obtained when the models are used to predict the sixth Zion geometry integral effects test at 1/10th scale

Direct containment heating models in the CONTAIN code

Energy Technology Data Exchange (ETDEWEB)

Washington, K.E.; Williams, D.C.

1995-08-01

The potential exists in a nuclear reactor core melt severe accident for molten core debris to be dispersed under high pressure into the containment building. If this occurs, the set of phenomena that result in the transfer of energy to the containment atmosphere and its surroundings is referred to as direct containment heating (DCH). Because of the potential for DCH to lead to early containment failure, the U.S. Nuclear Regulatory Commission (USNRC) has sponsored an extensive research program consisting of experimental, analytical, and risk integration components. An important element of the analytical research has been the development and assessment of direct containment heating models in the CONTAIN code. This report documents the DCH models in the CONTAIN code. DCH models in CONTAIN for representing debris transport, trapping, chemical reactions, and heat transfer from debris to the containment atmosphere and surroundings are described. The descriptions include the governing equations and input instructions in CONTAIN unique to performing DCH calculations. Modifications made to the combustion models in CONTAIN for representing the combustion of DCH-produced and pre-existing hydrogen under DCH conditions are also described. Input table options for representing the discharge of debris from the RPV and the entrainment phase of the DCH process are also described. A sample calculation is presented to demonstrate the functionality of the models. The results show that reasonable behavior is obtained when the models are used to predict the sixth Zion geometry integral effects test at 1/10th scale.

Structural review of the Palisades Nuclear Power Plant Unit 1 containment structure under combined loads for the Systematic Evaluation Program

International Nuclear Information System (INIS)

Liaw, C.Y.; Debeling, A.; Tsai, N.C.

1981-12-01

A structural reassessment of the containment structure of the Palisades Nuclear Power Plant Unit 1 was performed for the Nuclear Regulatory Commission as part of the Systematic Evaluation Program. Conclusions about the ability of the containment structure to withstand the Abnormal/Extreme Environment are presented. The reassessment focused mainly on the overall structural integrity of the containment building for the Abnormal/Extreme Environment. In this case, the Abnormal Environmental condition is caused by the worst case of either a Loss-of-Coolant Accident or a main steam line break. The Extreme Environmental condition is the Safe Shutdown Earthquake

Development of containers sealing system like part of surveillance program of the vessel in nuclear power plants

International Nuclear Information System (INIS)

Romero C, J.; Hernandez C, R.; Fernandez T, F.; Rocamontes A, M.; Perez R, N.

2009-10-01

The owners of nuclear power plants should be demonstrate that the embrittlement effects by neutronic radiation do not commit the structural integrity from the pressure vessel of nuclear reactors, during conditions of routine operation and below postulate accident. For this reason, there are surveillance programs of vessels of nuclear power plants, in which are present surveillance capsules. A surveillance capsule is compound by the support, six containers for test tubes and dosimeters. The containers for test tubes are of two types: rectangular container for test tubes, Charpy V and Cylindrical Container for tension test tubes. These test tubes are subject to a same or bigger neutronic flow to that of vessel, being representative of vessel mechanical conditions. The test tubes are rehearsed to watch over the increase of embrittlement that presents the vessel. This work describes the development of welding system to seal the containers for test tubes, these should be filled with helium of ultra high purity, to a pressure of an atmosphere. In this system the welding process Gas Tungsten Arc Welding is used, a hermetic camera that allows to place the containers with three grades of freedom, a vacuum subsystem and pressure, high technology equipment's like: power source with integrated computer, arc starter of high frequency, helium flow controller, among others. Finally, the advances in the inspection system for the qualification of sealing system are mentioned, system that should measure the internal pressure of containers and the helium purity inside these. (Author)

An approach regarding aging management program for concrete containment structure at the Gentilly-2 Nuclear Power Plant

Energy Technology Data Exchange (ETDEWEB)

Chenier, J-O.; Komljenovic, D., E-mail: Chenier.jean-olivier@hydro.qc.ca [Nuclear Power Plant Gentilly-2, Becancour, Quebec (Canada); Gocevski, V. [Hydro-Quebec Equipment, Structural Dept., Quebec (Canada); Picard, S.; Chretien, G. [Nuclear Power Plant Gentilly-2, Becancour, Quebec (Canada)

2012-07-01

The current paper presents the approach used by the Gentilly-2 Nuclear Power Plant, Hydro-Quebec, in elaborating a specific Aging Management Program (AMP) for its concrete containment structure. It is developed as a part of preparation activities for the plant refurbishment project. The specificity of the AMP consists in addressing Alkali-Aggregate Reaction (AAR) degradation mechanism which is not well known in the nuclear power industry. HQ developed a numerical model based on finite elements for assessing the concrete containment structure behaviour under the impact of AAR and other relevant degradation mechanisms. Such predictions enable a better targeting of corrective and mitigating actions during the second cycle of the G-2 operation while required. (author)

Containment long-term operational integrity

International Nuclear Information System (INIS)

Sammataro, R.F.

1990-01-01

Periodic integrated leak rate tests are required to assure that containments continue to meet allowable leakage limits. Although overall performance has been quite good to date, several major containment aging and degradation mechanisms have been identified. Two pilot plant life extension (PLEX) studies serve as models for extending the operational integrity of present containments for light-water cooled nuclear power plants in the United States. One study is for a Boiling-Water Reactor (BWR) and the second is for a Pressurized-Water Reactor (PWR). Research and testing programs for determining the ultimate pressure capacity and failure mechanisms for containments under severe loading conditions and studies for extending the life of current plants beyond the present 40-year licensed lifetime are under way. This paper presents an overview of containment designs in the United States. Also presented are a discussion of the American Society of Mechanical Engineers Boiler and Pressure Vessel Code (ASME Code) and regulatory authority requirements for the design, construction, inservice inspection, leakage testing and repair of steel and concrete containments. Findings for containments from the pilot PLEX studies and continuing containment integrity research and testing programs are discussed. The ASME Code and regulatory requirements together with recommendations from the PLEX studies and containment integrity research and testing provide a basis for continued containment long-term operational integrity. (orig./GL)

Situación escolar de Tenerife en 1816-1818, de acuerdo con el informe Persiva-Villanueva realizado para la Real Audiencia en cumplimiento de Real Orden comunicada por Puig Samper

Directory of Open Access Journals (Sweden)

José SANTOS PUERTO

2009-10-01

Full Text Available RESUMEN: Los procesos de escolarización de las Islas Canarias, iniciados a finales del Antiguo Régimen, son hoy poco y mal conocidos. La información educativa de la época de Fernando VII es particularmente deficiente, en parte debido a la desaparición de la documentación y a la quema de archivos, pero también como consecuencia de la poca rigurosidad de algunos trabajos dedicados a esa temática.En este estudio intentamos contribuir a mejor conocer la situación escolar de Tenerife en las primeras décadas del siglo XIX, de acuerdo con el informe elaborado en 1818 por el ilustrado marqués de Villanueva del Prado para la Real Audiencia de Las Palmas, que lo había solicitado a instancias de José María Puig Samper, presidente de la comisión encargada desde 1815 de elaborar un Plan de escuelas de primeras letras del Reino.La investigación, de carácter local, tiene no obstante una indudable importancia a nivel de Estado, ya que en la actualidad también es escasa la información educativa nacional relacionada con aquel Plan de escuelas iniciado por la comisión presidida por Puig Samper.ABSTRACT: The history of schooling in the Canary Islands, which began at the end of the historical period known as the Ancien Régime, is a little known and heretofore badly explained process. Information on education is particularly inadequate for the reign of Fernando VII, as a result of the disappearance of documents and the burning of the archives, but also as a consequence of the lack of thoroughness of some studies devoted to that topic.In this article we attempt to contribute to better knowledge of the educational situation in Tenerife during the early decades of the 19th century, dealing with the report that was drawn up in 1818 by the erudite Marquis of Villanueva del Prado for the Real Audiencia of Las Palmas, which had asked for it at the request of José María Puig Samper, president of the Commission which had the responsibility, since 1815

Situación escolar de Tenerife en 1816-1818, de acuerdo con el informe Persiva-Villanueva realizado para la Real Audiencia en cumplimiento de Real Orden comunicada por Puig Samper

Directory of Open Access Journals (Sweden)

José SANTOS PUERTO

2009-05-01

Full Text Available RESUMEN: Los procesos de escolarización de las Islas Canarias, iniciados a finales del Antiguo Régimen, son hoy poco y mal conocidos. La información educativa de la época de Fernando VII es particularmente deficiente, en parte debido a la desaparición de la documentación y a la quema de archivos, pero también como consecuencia de la poca rigurosidad de algunos trabajos dedicados a esa temática.En este estudio intentamos contribuir a mejor conocer la situación escolar de Tenerife en las primeras décadas del siglo XIX, de acuerdo con el informe elaborado en 1818 por el ilustrado marqués de Villanueva del Prado para la Real Audiencia de Las Palmas, que lo había solicitado a instancias de José María Puig Samper, presidente de la comisión encargada desde 1815 de elaborar un Plan de escuelas de primeras letras del Reino.La investigación, de carácter local, tiene no obstante una indudable importancia a nivel de Estado, ya que en la actualidad también es escasa la información educativa nacional relacionada con aquel Plan de escuelas iniciado por la comisión presidida por Puig Samper.ABSTRACT: The history of schooling in the Canary Islands, which began at the end of the historical period known as the Ancien Régime, is a little known and heretofore badly explained process. Information on education is particularly inadequate for the reign of Fernando VII, as a result of the disappearance of documents and the burning of the archives, but also as a consequence of the lack of thoroughness of some studies devoted to that topic.In this article we attempt to contribute to better knowledge of the educational situation in Tenerife during the early decades of the 19th century, dealing with the report that was drawn up in 1818 by the erudite Marquis of Villanueva del Prado for the Real Audiencia of Las Palmas, which had asked for it at the request of José María Puig Samper, president of the Commission which had the responsibility, since 1815

Graben structure in the Las Cañadas edifice (Tenerife, Canary Islands): implications for active degassing and insights on the caldera formation

Science.gov (United States)

Galindo, Inés; Soriano, Carles; Martí, Joan; Pérez, Nemesio

2005-06-01

A graben structure has been identified at the western area of the Las Cañadas caldera wall, here referred as the Los Azulejos Graben. This graben is 1 km wide and is bounded by two major normal faults trending NE-SW, the Los Azulejos Fault and the Ucanca Fault. The graben was active for at least 0.5 Ma, from the end of the Ucanca Fm to the end of the Guajara Fm, and before the collapse of the Las Cañadas edifice that formed the western caldera. A right-lateral transtension regime operated in the graben as suggested by small fault orientations and kinematics. The prolongation of the NE rift zone of Tenerife to the Cañadas edifice is the most likely volcano-tectonic scenario for the graben. In this context, inflation of phonolitic shallow magma chambers may have produced reverse faults and reactivation of normal faults. An intense and widespread hydrothermal alteration, here called Azulejos-type, occurred mainly before the graben formation, while a fault-related hydrothermal alteration occurred during and after the graben. Diffuse carbon dioxide and hydrogen degassing in and around the Las Cañadas caldera show relatively enriched values along a NE-SW trend suggesting that faults in the Los Azulejos Graben act as a pathway for deep-seated gases to the surface. Diffuse degassing and hydrothermalism indicate that the graben area has been a zone of intense fluid circulation during the evolution of the Las Cañadas edifice.

Are both sympatric species Ilex perado and Ilex canariensis secretly hybridizing? Indication from nuclear markers collected in Tenerife

Directory of Open Access Journals (Sweden)

Manen Jean-François

2004-11-01

Full Text Available Abstract Background Intra-specific and intra-individual polymorphism is frequently observed in nuclear markers of Ilex (Aquifoliaceae and discrepancy between plastid and nuclear phylogenies is the rule in this genus. These observations suggest that inter-specific plastid or/and nuclear introgression played an important role in the process of evolution of Ilex. With the aim of a precise understanding of the evolution of this genus, two distantly related sympatric species collected in Tenerife (Canary Islands, I. perado and I. canariensis, were studied in detail. Introgression between these two species was previously never reported. One plastid marker (the atpB-rbcL spacer and two nuclear markers, the ribosomal internal transcribed spacer (ITS and the nuclear encoded plastid glutamine synthetase (nepGS were analyzed for 13 and 27 individuals of I. perado and I. canariensis, respectively. Results The plastid marker is intra-specifically constant and correlated with species identity. On the other hand, whereas the nuclear markers are conserved in I. perado, they are highly polymorphic in I. canariensis. The presence of pseudogenes and recombination in ITS sequences of I. canariensis explain this polymorphism. Ancestral sequence polymorphism with incomplete lineage sorting, or past or recent hybridization with an unknown species could explain this polymorphism, not resolved by concerted evolution. However, as already reported for many other plants, past or recent introgression of an alien genotype seem the most probable explanation for such a tremendous polymorphism. Conclusions Data do not allow the determination with certitude of the putative species introgressing I. canariensis, but I. perado is suspected. The introgression would be unilateral, with I. perado as the male donor, and the paternal sequences would be rapidly converted in highly divergent and consequently unidentifiable pseudogenes. At least, this study allows the establishment of

Container Materials, Fabrication And Robustness

International Nuclear Information System (INIS)

Dunn, K.; Louthan, M.; Rawls, G.; Sindelar, R.; Zapp, P.; Mcclard, J.

2009-01-01

The multi-barrier 3013 container used to package plutonium-bearing materials is robust and thereby highly resistant to identified degradation modes that might cause failure. The only viable degradation mechanisms identified by a panel of technical experts were pressurization within and corrosion of the containers. Evaluations of the container materials and the fabrication processes and resulting residual stresses suggest that the multi-layered containers will mitigate the potential for degradation of the outer container and prevent the release of the container contents to the environment. Additionally, the ongoing surveillance programs and laboratory studies should detect any incipient degradation of containers in the 3013 storage inventory before an outer container is compromised.

Babcock and Wilcox revisions to CONTEMPT, computer program for predicting containment pressure-temperature response to a loss-of-coolant accident

International Nuclear Information System (INIS)

Hsii, Y.H.

1975-01-01

The CONTEMPT computer program predicts the pressure-temperature response of a single-volume reactor building to a loss-of-coolant accident. The analytical model used for the program is described. CONTEMPT assumes that the loss-of-coolant accident can be separated into two phases; the primary system blowdown and reactor building pressurization. The results of the blowdown analysis serve as the boundary conditions and are input to the CONTEMPT program. Thus, the containment model is only concerned with the pressure and temperature in the reactor building and the temperature distribution through the reactor building structures. The program also calculates building leakage and the effects of engineered safety features such as reactor building sprays, decay heat coolers, sump coolers, etc. 11 references. (U.S.)

Two new species of the genus Peristenus Foerster (Hymenoptera: Braconidae: Euphorinae) from the Canary Islands

NARCIS (Netherlands)

Achterberg, van C.; Guerrero, E.R.

2003-01-01

Two new species of the genus Peristenus Foerster (Hymenoptera: Braconidae: Euphorinae) from the Canary Islands are described and illustrated: Peristenus angifemoralis spec. nov. from Tenerife, and P. gloriae spec. nov. from Gran Canaria and Tenerife.

The impact of BWR MK I primary containment failure dynamics on secondary containment integrity

International Nuclear Information System (INIS)

Greene, S.R.

1987-01-01

During the past four years, the ORNL BWRSAT Program has developed a series of increasingly sophisticated BWR secondary containment models. These models have been applied in a variety of studies to evaluate the severe accident mitigation capability of BWR secondary containments. This paper describes the results of a recent ORNL study of the impact of BWR MK I primary containment failure dynamics on secondary containment integrity. A 26-cell MELCOR Browns Ferry secondary containment model is described and the predicted thermodynamic response of the secondary containment to a variety of postulated primary containment failure modes is presented. The effects of primary containment failure location, timing, and ultimate hole size on secondary containment response is investigated, and the potential impact of hydrogen deflagrations on secondary containment integrity is explored

Early results from an experimental program to determine the behavior of containment piping penetration bellows subjected to severe accident conditions

International Nuclear Information System (INIS)

Lambert, L.D.; Parks, M.B.

1994-01-01

Containment piping penetration bellows are an integral part of the pressure boundary in steel containments in the United States (US). Their purpose is to minimize loading on the containment shell caused by differential movement between the piping and the containment. This differential movement is typically caused by thermal gradients generated during startup and shutdown of the reactor, but can be caused by earthquake, a loss-of-coolant accident (LOCA), or ''severe'' accidents. In the event of a severe accident, the bellows would be subjected to pressure, temperature, and deflection well beyond the design basis. Most bellows are installed such that they would be subjected to elevated internal pressure, elevated temperature, axial compression, and lateral deflection during a severe accident. A few bellows would be subjected to external pressure and axial elongation, as well as elevated temperature and lateral deflection. The purpose of this experimental program is to examine the potential for leakage of containment bellows during a severe accident. The test series subjects bellows to various levels and combinations of internal pressure, elevated temperature, axial compression or elongation, and lateral deformation. The experiments are being conducted in two parts. For Part 1, all bellows specimens are tested in ''like-new'' condition, without regard for the possible degrading effect of corrosion that has been observed in some containment piping bellows in the US Part I testing, which included 13 bellows tests, has been completed. The second part of the experimental program, in which bellows are subjected to simulated corrosive environments prior to testing, has just just begun. The Part I experiments have shown that bellows in ''like-new'' condition can withstand elevated temperatures and pressures along with large deformations before leaking. In most cases, the like-new bellows were fully compressed without developing any leakage

Impact analysis of a hydrogen isotopes container

International Nuclear Information System (INIS)

Lee, M. S.; Hwang, C. S.; Jeong, H. S.

2003-01-01

The container used for the radioactive materials, containing hydrogen isotopes is evaluated in a view of hypothetical accident. The computational analysis is a cost effective tool to minimize testing and streamline the regulatory procedures, and supports experimental programs to qualify the container for the safe transport of radioactive materials. The numerical analysis of 9m free-drop onto a flat unyielding, horizontal surface has been performed using the explicit finite element computer program ABAQUS. Especially free-drop simulations for 30 .deg. C tilted condition are precisely estimated

Would you procure radioactive containers without a supplier quality evaluation?

International Nuclear Information System (INIS)

Hawk, M.; Kapoor, A.; Natali, R.B.

2004-01-01

U.S. Department of Energy (DOE) sites/contractors purchase several different types of containers (such as boxes, drums, large bulk dump trucks, railcars, cargo containers, burrito wraps, and super sacks) for use in the storage and transportation of low-level waste. These containers are purchased from several suppliers - all of whom must be pre-approved according to DOE rules, orders and guidelines - and the suppliers must manufacture the containers to exact specifications and designs supplied by the DOE site/contractor. DOE studies and qualitative evaluations indicate that the current supplier evaluation process is too costly and inefficient. Therefore, DOE, in coordination with sites/contractors, instituted a corporate approach to centralize the supplier quality evaluation program for the procurement of containers. That effort resulted in the development of this Container Suppler Evaluation Program. The program was implemented when two suppliers were evaluated using this program

Would you procure radioactive containers without a supplier quality evaluation?

Energy Technology Data Exchange (ETDEWEB)

Hawk, M. [Oak Ridge National Lab., TN (United States); Kapoor, A.; Natali, R.B.

2004-07-01

U.S. Department of Energy (DOE) sites/contractors purchase several different types of containers (such as boxes, drums, large bulk dump trucks, railcars, cargo containers, burrito wraps, and super sacks) for use in the storage and transportation of low-level waste. These containers are purchased from several suppliers - all of whom must be pre-approved according to DOE rules, orders and guidelines - and the suppliers must manufacture the containers to exact specifications and designs supplied by the DOE site/contractor. DOE studies and qualitative evaluations indicate that the current supplier evaluation process is too costly and inefficient. Therefore, DOE, in coordination with sites/contractors, instituted a corporate approach to centralize the supplier quality evaluation program for the procurement of containers. That effort resulted in the development of this Container Suppler Evaluation Program. The program was implemented when two suppliers were evaluated using this program.

Program for certification of waste from contained firing facility: Establishment of waste as non-reactive and discussion of potential waste generation problems

International Nuclear Information System (INIS)

Green, L.; Garza, R.; Maienschein, J.; Pruneda, C.

1997-01-01

Debris from explosives testing in a shot tank that contains 4 weight percent or less of explosive is shown to be non-reactive under the specified testing protocol in the Code of Federal Regulations. This debris can then be regarded as a non-hazardous waste on the basis of reactivity, when collected and packaged in a specified manner. If it is contaminated with radioactive components (e.g. depleted uranium), it can therefore be disposed of as radioactive waste or mixed waste, as appropriate (note that debris may contain other materials that render it hazardous, such as beryllium). We also discuss potential waste generation issues in contained firing operations that are applicable to the planned new Contained Firing Facility (CFF). The goal of this program is to develop and document conditions under which shot debris from the planned Contained Firing Facility (CFF) can be handled, shipped, and accepted for waste disposal as non-reactive radioactive or mixed waste. This report fulfills the following requirements as established at the outset of the program: 1. Establish through testing the maximum level of explosive that can be in a waste and still have it certified as non-reactive. 2. Develop the procedure to confirm the acceptability of radioactive-contaminated debris as non-reactive waste at radioactive waste disposal sites. 3. Outline potential disposal protocols for different CFF scenarios (e.g. misfires with scattered explosive)

Regulated programmed lysis of recombinant Salmonella in host tissues to release protective antigens and confer biological containment

OpenAIRE

Kong, Wei; Wanda, Soo-Young; Zhang, Xin; Bollen, Wendy; Tinge, Steven A.; Roland, Kenneth L.; Curtiss, Roy

2008-01-01

We have devised and constructed a biological containment system designed to cause programmed bacterial cell lysis with no survivors. We have validated this system, using Salmonella enterica serovar Typhimurium vaccines for antigen delivery after colonization of host lymphoid tissues. The system is composed of two parts. The first component is Salmonella typhimurium strain χ8937, with deletions of asdA and arabinose-regulated expression of murA, two genes required for peptidoglycan synthesis a...

Hydrogen transport in the containment; Wasserstofftransport im Containment

Energy Technology Data Exchange (ETDEWEB)

Royl, P.; Mueller, C.; Travis, J.R.; Wilson, T.

1995-08-01

For the description of transport phenomena in water vapor/hydrogen mixtures released in nuclear meltdown accidents, an integrated analytical model is being developed for LWR containments. Thermal and mechanical loads due to recombination and combustion are to be calculable. The 3-dimensional GASFLOW code was taken over from LANL in exchange for HDR experimental results and Battelle BMC program results. (orig.)

Steel containment buckling

International Nuclear Information System (INIS)

Bennett, J.G.; Fly, G.W.; Baker, W.E.

1984-01-01

The Steel Containment Buckling program is in its fourth phase of work directed at the evaluation of the effects of the structural failure mode of steel containments when the membrane stresses are compressive. The structural failure mode for this state of stress is instability or buckling. The program to date has investigated: (1) the effect on overall buckling capacity of the ASME area replacement method for reinforcing around circular penetrations; (2) a set of benchmark experiments on ring-stiffened shells having reinforced and framed penetrations; (3) large and small scale experiments on knuckle region buckling from internal pressure and post-buckling behavior to failure for vessel heads having torispherical geometries; and (4) buckling under time-dependent loadings (dynamic buckling). The first two investigations are complete, the knuckle buckling experimental efforts are complete with data analysis and reporting in progress, and the dynamic buckling experimental and analytical work is in progress

[Characterization of the atmospheric environment in Las Palmas de Gran Canaria and Santa Cruz de Tenerife, Spain: 2000-2004].

Science.gov (United States)

López Villarrubia, Elena; García Pérez, M Dolores; Peral Pérez, Nieves; Ballester Díez, Ferrán; Iñiguez Fernández, Carmen; Pita Toledo, M Luisa

2008-01-01

The island factor in the cities of Las Palmas de Gran Canaria and Santa Cruz de Tenerife, their meteorology and the proximity to the African Continent that originates the natural particulate matter transport over the islands, cause some specific features in their air quality. The aim of this paper is to characterize the air pollution from 2000 to 2004 as exposure indicator of both cities inhabitants. 24 hour daily average variables of PM10, PM2,5, NO2, SO2 and O3 , 8 hours daily maxima moving averages of O3 y CO and 1 hour maxima of SO2, NO2, O3, CO, PM10 y PM2,5 were calculated. Daily levels of coarse particles were obtained subtracting PM2,5 from PM10. African dust events were identified. In Sta. Cruz de Tf daily means of SO2 (14.0 microg/m(3)N) and ozone levels (44.4 microg/m(3)N ) were higher than Las Palmas de GC levels (8.0 y 28.3 microg/m(3)N). Daily means of NO2 in Las Palmas de GC: 45.8 microg/m(3)N where higher than Sta. Cruz de Tf levels: 30.3 microg/m(3)N. Due to African dust outbreaks, some days in both cities exceeded 600 microg/m(3) of PM10 and 200 of PM2.5 24-h average. The air quality patterns were characterized by very high levels of African dust outbreaks that affect all PM size fractions. Different O3 seasonality exists respect European cities in addition to an urban-industrial ambient air in Sta. Cruz de TF and clearly urban in Las Palmas de GC. These results have to be considered in order to lay the foundations to suitable surveillance systems, analyse the potential impact on the Canary Islands citizens health and to get conclusions.

Two-dimensional radiation shielding optimization analysis of spent fuel transport container

International Nuclear Information System (INIS)

Tian Yingnan; Chen Yixue; Yang Shouhai

2013-01-01

The intelligent radiation shielding optimization design software platform is a one-dimensional multi-target radiation shielding optimization program which is developed on the basis of the genetic algorithm program and one-dimensional discrete ordinate program-ANISN. This program was applied in the optimization design analysis of the spent fuel transport container radiation shielding. The multi-objective optimization calculation model of the spent fuel transport container radiation shielding was established, and the optimization calculation of the spent fuel transport container weight and radiation dose rate was carried by this program. The calculation results were checked by Monte-Carlo program-MCNP/4C. The results show that the weight of the optimized spent fuel transport container decreases to 81.1% of the origin and the radiation dose rate decreases to below 65.4% of the origin. The maximum deviation between the calculated values from the program and the MCNP is below 5%. The results show that the optimization design scheme is feasible and the calculation result is correct. (authors)

Geothermal Technologies Program Overview - Peer Review Program

Energy Technology Data Exchange (ETDEWEB)

Milliken, JoAnn [Office of Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States)

2011-06-06

This Geothermal Technologies Program presentation was delivered on June 6, 2011 at a Program Peer Review meeting. It contains annual budget, Recovery Act, funding opportunities, upcoming program activities, and more.

Current vegetation status in the area of potential laurisilva from the Monte del Agua - Erjos watershed (Tenerife, Spain after the 2007 wildfire

Directory of Open Access Journals (Sweden)

M.E. Arozena

2013-05-01

Full Text Available The capacity of Pinus canariensis to support the effect of the fire and the fact that great part of the fires happened in Canaries have concerned to forests of this species in the last decades explain the focus put in the study about fires of the pinegrove. However, few works were done on the fire in the Canarian laurel forest. The fire of August 2007 in Tenerife affected a sector of the potential area of laurel forest, in the west of the island, and provided the opportunity of an approximation to the knowledge of the way in which the fire concerns this type of forest. The study area has a mosaic of different plant communities ecologically and floristically related to the laurel forest: a structured forest, dominated by evergreen broadleaf species, Erica arborea scrubs and old fields at different stages of recolonization after the abandonment of crops, as well as small areas with Pinus canariensis and Pinus radiata plantations. Through analysis of the floristic composition, of the vegetation physiognomy and the post-fire reproduction systems by species in forest and bush areas, a very active regeneration has been found in all situations. The importance of "self-succession" as a process of regeneration is remarkable, with a domination of the asexual reproduction in the forest areas and the combination of this one with the sexual one in those of the bushes formations. So, in the same way that happens with other types of vegetation, has been observed that the reaction of the laurel forest is very related with the features of the vegetation pre-fire, at least when the fire does not concern the soil, as in this case.

Programming molecular self-assembly of intrinsically disordered proteins containing sequences of low complexity

Science.gov (United States)

Simon, Joseph R.; Carroll, Nick J.; Rubinstein, Michael; Chilkoti, Ashutosh; López, Gabriel P.

2017-06-01

Dynamic protein-rich intracellular structures that contain phase-separated intrinsically disordered proteins (IDPs) composed of sequences of low complexity (SLC) have been shown to serve a variety of important cellular functions, which include signalling, compartmentalization and stabilization. However, our understanding of these structures and our ability to synthesize models of them have been limited. We present design rules for IDPs possessing SLCs that phase separate into diverse assemblies within droplet microenvironments. Using theoretical analyses, we interpret the phase behaviour of archetypal IDP sequences and demonstrate the rational design of a vast library of multicomponent protein-rich structures that ranges from uniform nano-, meso- and microscale puncta (distinct protein droplets) to multilayered orthogonally phase-separated granular structures. The ability to predict and program IDP-rich assemblies in this fashion offers new insights into (1) genetic-to-molecular-to-macroscale relationships that encode hierarchical IDP assemblies, (2) design rules of such assemblies in cell biology and (3) molecular-level engineering of self-assembled recombinant IDP-rich materials.

Containment leakage rate testing requirements

International Nuclear Information System (INIS)

Arndt, E.G.

1992-01-01

This report presents the status of several documents under revision or development that provide requirements and guidance for testing nuclear power plant containment systems for leakage rates. These documents include the general revision to 10 CFR Part 50, Appendix J; the regulatory guide affiliated with the revision to Appendix J; the national standard that the regulatory guide endorses, ANSI/ANS-56.8, 'Containment System Leakage Rate Testing Requirements'; and the draft industry Licensing Topical Report, 'Standardized Program for Primary Containment Integrity Testing'. The actual or potential relationships between these documents are also explored

Complex-wide representation of material packaged in 3013 containers

Energy Technology Data Exchange (ETDEWEB)

Narlesky, Joshua E.; Peppers, Larry G.; Friday, Gary P.

2009-06-01

The DOE sites packaging plutonium oxide materials packaged according to Department of Energy 3013 Standard (DOE-STD-3013) are responsible for ensuring that the materials are represented by one or more samples in the Materials Identification and Surveillance (MIS) program. The sites categorized most of the materials into process groups, and the remaining materials were characterized, based on the prompt gamma analysis results. The sites issued documents to identify the relationships between the materials packaged in 3013 containers and representative materials in the MIS program. These “Represented” documents were then reviewed and concurred with by the MIS Working Group. However, these documents were developed uniquely at each site and were issued before completion of sample characterization, small-scale experiments, and prompt gamma analysis, which provided more detailed information about the chemical impurities and the behavior of the material in storage. Therefore, based on the most recent data, relationships between the materials packaged in 3013 containers and representative materials in the MIS program been revised. With the prompt gamma analysis completed for Hanford, Rocky Flats, and Savannah River Site 3013 containers, MIS items have been assigned to the 3013 containers for which representation is based on the prompt gamma analysis results. With the revised relationships and the prompt gamma analysis results, a Master “Represented” table has been compiled to document the linkages between each 3013 container packaged to date and its representative MIS items. This table provides an important link between the Integrated Surveillance Program database, which contains information about each 3013 container to the MIS items database, which contains the characterization, prompt gamma data, and storage behavior data from shelf-life experiments for the representative MIS items.

Complex-wide representation of material packaged in 3013 containers

International Nuclear Information System (INIS)

Narlesky, Joshua E.; Peppers, Larry G.; Friday, Gary P.

2009-01-01

The DOE sites packaging plutonium oxide materials packaged according to Department of Energy 3013 Standard (DOE-STD-3013) are responsible for ensuring that the materials are represented by one or more samples in the Materials Identification and Surveillance (MIS) program. The sites categorized most of the materials into process groups, and the remaining materials were characterized, based on the prompt gamma analysis results. The sites issued documents to identify the relationships between the materials packaged in 3013 containers and representative materials in the MIS program. These 'Represented' documents were then reviewed and concurred with by the MIS Working Group. However, these documents were developed uniquely at each site and were issued before completion of sample characterization, small-scale experiments, and prompt gamma analysis, which provided more detailed information about the chemical impurities and the behavior of the material in storage. Therefore, based on the most recent data, relationships between the materials packaged in 3013 containers and representative materials in the MIS program have been revised. With the prompt gamma analysis completed for Hanford, Rocky Flats, and Savannah River Site 3013 containers, MIS items have been assigned to the 3013 containers for which representation is based on the prompt gamma analysis results. With the revised relationships and the prompt gamma analysis results, a Master 'Represented' table has been compiled to document the linkages between each 3013 container packaged to date and its representative MIS items. This table provides an important link between the Integrated Surveillance Program database, which contains information about each 3013 container to the MIS items database, which contains the characterization, prompt gamma data, and storage behavior data from shelf-life experiments for the representative MIS items

Los paisajes actuales y del pasado de un espacio de montaña volcánica: la Reserva Natural Especial del Chinyero (Tenerife, Islas Canarias

Directory of Open Access Journals (Sweden)

Esther Beltán Yanes

2017-01-01

Full Text Available La Reserva Natural Especial del Chinyero se localiza al noroeste de Tenerife a una altitud entre 600 y 1.550 msnm. Este espacio protegido ofrece hoy un excepcional paisaje natural integrado por volcanes recientes e históricos de morfología estromboliana, colonizados por bosques de pino canario. Sin embargo, en la reserva se descubren huellas de otros paisajes del pasado que respondían a una original convivencia de la población con los volcanes y bosques de este sector. Este trabajo tiene por objetivo el estudio del paisaje de este paraje natural con el fin de identificar y caracterizar los rasgos de su fisonomía actual, pero también recuperar otros paisajes olvidados de estas montañas. Hoy las prioridades en su protección y gestión sólo se fundamentan en sus valores naturales La restauración de estas antiguas fisonomías desvelará el importante contenido cultural que además poseen estos paisajes, pues constituían el mejor reflejo de lo que era un apro- vechamiento racional de los escasos recursos naturales. Este trabajo se centra en el estudio del paisaje a través del análisis de la relación espacial de sus componentes y la importancia relativa de éstos en la configuración de una imagen exclusiva de la montaña canaria, prestando especial énfasis en su evolución.

Determining prestressing forces for inspection of prestressed concrete containments

International Nuclear Information System (INIS)

1990-07-01

General Design Criterion 53, ''Provisions for Containment Testing and Inspection,'' of Appendix A, ''General Design Criteria for Nuclear Power Plants,'' to 10 CFR Part 50, ''Domestic Licensing of Production and Utilization Facilities,'' requires, in part, that the reactor containment be designed to permit (1) periodic inspection of all important areas and (2) an appropriate surveillance program. Regulatory Guide 1.35, ''Inservice Inspection of Ungrouted Tendons in Prestressed Concrete Containment Structures,'' describes a basis acceptable to the NRC staff for developing an appropriate inservice inspection and surveillance program for ungrouted tendons in prestressed concrete containment structures of light-water-cooled reactors. This guide expands and clarifies the NRC staff position on determining prestressing forces to be used for inservice inspections of prestressed concrete containment structures

Containment and Surveillance Equipment Compendium

International Nuclear Information System (INIS)

Luetters, F.O.

1980-02-01

The Containment and Surveillance Equipment Compendium contains information sections describing the application and status of seals, optical surveillance systems, and monitors for international safeguards systems. The Compendium is a collection of information on equipment in use (generally by the IAEA) or under development in the US in diverse programs being conducted at numerous facilities under different sponsors. The Compendium establishes a baseline for the status and applications of C/S equipment and is a tool to assist in the planning of future C/S hardware development activities. The Appendix contains design concepts which can be developed to meet future goals

EL ABSENTISMO ESCOLAR EN EL MUNICIPIO DE CANDELARIA, TENERIFE, ISLAS CANARIAS (ESPAÑA. RESULTADOS DE UN ESTUDIO INTERDISCIPLINAR DESDE LA PRAXIS DE LA EDUCACIÓN Y EL TRABAJO SOCIAL

Directory of Open Access Journals (Sweden)

Juan Manuel Herrera Hernández

2013-01-01

Full Text Available El presente artículo analiza los resultados de un estudio sobre la evolución de la incidencia y prevalencia del absentismo escolar en el municipio de Candelaria, Tenerife, Islas Canarias, España, entre los cursos académicos 2008-2011. La relevancia de éste se centra en determinar las variables moduladoras que inciden en la progresión a un nivel micro y macrosistémico del absentismo escolar en este territorio, sin perder de vista el enfoque de género. Asimismo, se arrojan un conjunto de resultados globales, de cara a articular y fortalecer un auténtico diagnóstico psico-socioeducativo, que permita ante la detección de conductas absentistas, activar el protocolo de actuación implementado en esta corporación local, el cual se viene desarrollando en el marco del Programa de Prevención del Absentismo Escolar a nivel municipal. Todo ello, contribuye en la intervención psicosocio-comunitaria a implicar de forma activa y con una visión proactiva a los diferentes actores sociales inmersos en el ámbito socioeducativo, destacando con mayor énfasis, el papel que han de jugar en tan compleja, pero a la vez necesaria tarea, las familias, los docentes y los Servicios Sociales Municipales.

Development of metallic high integrity containers

International Nuclear Information System (INIS)

Temus, C.J.; Porter, S.A.; Kent, J.D.; Goetsch, S.D.

1985-01-01

This paper presents the development program for metallic high integrity containers (HIC's). The need for a high strength, thin walled HIC became apparent with the implementation of 10 CFR 61 in late 1983. The existing containers that were in use at that time were made of either low strength material (polyethylene) or bulky, heavy material (concrete). Neither of these materials met the need for a high strength, volume and weight efficient container that could survive the deep burial environment of sites such as Hanford, Washington. Various alloys were considered for corrosion resistance for a 300 year life, high strength and toughness, and elastic stability to meet the requirements of 10 CFR 61. The alloy allowed for great flexibility in design to accommodate various waste forms. The containers were developed in various sizes with several different closures designed to minimize operator exposure during the loading operation. These design features provide the industry with efficient, disposable packages for a wide variety of waste forms. The paper describes the analytical methodology and prototype test program. The analytical methods included finite element modeling of the burial conditions, prediction of drop performance,and elastic stability analysis. Prototype testing included leak tests and drop tests at various container orientations from heights of up to 25 feet

Moestrupia oblonga gen. et comb. nov. (syn.: Gyrodinium oblongum), a new marine dinoflagellate genus characterized by light and electron microscopy, photosynthetic pigments and LSU rDNA sequence

DEFF Research Database (Denmark)

Hansen, Gert; Daugbjerg, Niels

2011-01-01

A small-sized, peridinin-containing, athecate dinoflagellate (13–17 µm long) was isolated into clonal culture from a water sample collected at a nearshore location in Tenerife, Spain (October 2004). Based on phenotypic characters (size, shape, pyrenoid and nucleus position), the culture was ident...... the anterior part of the ventral flange to the middorsal side of the episome. Thus, it differs markedly from that in species of Gyrodinium and emphasizes it being distantly related to this genus...

BWR Mark III pressure suppression containment response to hydrogen deflagration

International Nuclear Information System (INIS)

Fuls, G.M.; Gunter, A.D.

1982-01-01

The CLASIX-3 computer program has been used to evaluate the temperature and pressure response of the BWR Mark III Suppression Containment System to hydrogen deflagration resulting from a degraded core condition. The CLASIX-3 computer program is an extension of the CLASIX program which was originally developed to analyze ice condenser containments. A brief description is given of the modifications made to CLASIX to increase its flexibility and versatility to include the capability of analyzing the Mark III Containment. Analytical results are presented for the two base case transients. The two base cases are the stuck open steam relief valve and the small break LOCA, both of which are assumed to lead to a degraded core condition and the release of hydrogen to the containment. Results include pressure and temperature response, gas concentrations and suppression pool response

Steel containment buckling

International Nuclear Information System (INIS)

Butler, T.A.; Baker, W.E.

1987-01-01

Two aspects of buckling of a free-standing nuclear containment building were investigated in a combined experimental and analytical program. In the first part of the study, the response of a scale model of a containment building to dynamic base excitation is investigated. A simple harmonic signal was used for preliminary studies followed by experiments with scaled earthquake signals as the excitation source. The experiments and accompanying analyses indicate that the scale model response to earthquake-type excitations is very complex and that current analytical methods may require that a dynamic capacity reduction factor be incorporated. The second part of the study quantified the effects of framing at large penetrations on the static buckling capacity of scale model containments. Results show little effect from the framing for the scale models constructed from the polycarbonate, Lexan. However, additional studies with a model constructed of the prototypic steel material are recommended. (orig.)

Steel containment buckling

International Nuclear Information System (INIS)

Butler, T.A.; Baker, W.E.

1986-01-01

Two aspects of buckling of a free-standing nuclear steel containment building were investigated in a combined experimental and analytical program. In the first part of the study, the response of a scale model of a containment building to dynamic base excitation is investigated. A simple harmonic signal was used for preliminary studies followed by experiments with scaled earthquake signals as the excitation source. The experiments and accompanying analyses indicate that the scale model response to earthquake-type excitations is very complex and that current analytical methods may require a dynamic capacity reduction factor to be incorporated. The second part of the study quantified the effects of framing at large penetrations on the static buckling capacity of scale model containments. Results show little effect from the framing for the scale models constructed from the polycarbonate, Lexan. However, additional studies with a model constructed of the prototypic steel material are suggested

Uptake of a government-funded pertussis-containing booster vaccination program for parents of new babies in Victoria, Australia.

Science.gov (United States)

Rowe, Stacey L; Cunningham, Helen M; Franklin, Lucinda J; Lester, Rosemary A

2015-04-08

An epidemic of Bordetella pertussis in Victoria, Australia, led to the implementation of a Government-funded vaccination program for parents of new babies. The rationale was to protect unimmunised infants from infection by vaccinating parents with a pertussis-containing vaccine. This is known as cocooning. To estimate uptake of the vaccine among parents of new babies, two-and-a-half years after the program was implemented. A state-wide cross-sectional survey of parents was conducted to ascertain vaccine uptake, and to identify where and when the vaccination took place. Surveys were administered between 15 February and 14 March 2012, inclusive. Of 6308 surveys distributed, 2510 completed surveys were returned (response rate 40%). Ninety-five surveys completed outside the study period were excluded, leaving 2415 available for analysis. Overall, 1937 (80%) mothers and 1385 (70%) fathers were vaccinated in relation to the birth of their most recent child. A majority of mothers were vaccinated in hospital (62%). Most fathers were vaccinated by a general practitioner (72%). The most common point at which mothers were vaccinated was before their child turned two weeks of age (65%). Fathers' vaccination time-point varied more widely: during pregnancy (25%); before their child turned two weeks of age (29%); and when their child was between two and eight weeks of age (28%). Results of this survey indicated excellent uptake of the vaccine among both mothers and fathers under the Government-funded cocooning program. The findings are suggestive of an effective communications program designed to raise awareness of the risks of pertussis, and to promote availability of the funded vaccination program. The results may contribute to policy implementation of adult immunisation programs such as cocooning. Copyright © 2015 Elsevier Ltd. All rights reserved.

Magma mixing in the 1100 AD Montaña Reventada composite lava flow, Tenerife, Canary Islands: interaction between rift zone and central volcano plumbing systems

Science.gov (United States)

Wiesmaier, S.; Deegan, F. M.; Troll, V. R.; Carracedo, J. C.; Chadwick, J. P.; Chew, D. M.

2011-09-01

Zoned eruption deposits commonly show a lower felsic and an upper mafic member, thought to reflect eruption from large, stratified magma chambers. In contrast, the Montaña Reventada composite flow (Tenerife) consists of a lower basanite and a much thicker upper phonolite. A sharp interface separates basanite and phonolite, and chilled margins at this contact indicate the basanite was still hot upon emplacement of the phonolite, i.e. the two magmas erupted in quick succession. Four types of mafic to intermediate inclusions are found in the phonolite. Inclusion textures comprise foamy quenched ones, others with chilled margins and yet others that are physically mingled, reflecting progressive mixing with a decreasing temperature contrast between the end-members. Analysis of basanite, phonolite and inclusions for majors, traces and Sr, Nd and Pb isotopes show the inclusions to be derived from binary mixing of basanite and phonolite end-members in ratios of 2:1 to 4:1. Although, basanite and phonolite magmas were in direct contact, contrasting 206Pb/204Pb ratios show that they are genetically distinct (19.7193(21)-19.7418(31) vs. 19.7671(18)-19.7807(23), respectively). We argue that the Montaña Reventada basanite and phonolite first met just prior to eruption and had limited interaction time only. Montaña Reventada erupted from the transition zone between two plumbing systems, the phonolitic Teide-Pico Viejo complex and the basanitic Northwest rift zone. A rift zone basanite dyke most likely intersected the previously emplaced phonolite magma chamber. This led to eruption of geochemically and texturally unaffected basanite, with the inclusion-rich phonolite subsequently following into the established conduit.

The convertible client/server technology in large container inspection system

International Nuclear Information System (INIS)

Chen Zhiqiang; Zhang Li; Gao Wenhuan; Kang Kejun

2001-01-01

The author presents a new convertible client/server technology in distributed networking environment of a large container inspection system. The characteristic and advantage of this technology is introduced. The authors illustrate the policy of the technology to develop the networking program, and provide one example about how to program the software in large container inspection system using the new technology

The US Support Program to IAEA Safeguards Priority of Containment and Surveillance

Energy Technology Data Exchange (ETDEWEB)

Diaz,R.A.

2008-06-13

The United States Support Program (USSP) priority for containment and surveillance (US) focuses on maintaining or improving the reliability and cost-effectiveness of C/S systems for IAEA safeguards, expanding the number of systems that are unattended and remotely monitored, and developing verification methods that help streamline the on-site inspection process. Existing IAEA C/S systems have evolved to become complex, integrated systems, which may include active seals, nondestructive assay (NDA) instruments, video cameras, and other sensors. These systems operate autonomously. They send analytical data to IAEA headquarters where it can be reviewed. These systems present challenges to the goals of improved system performance, standardization, reliability, maintainability, documentation, and cost effectiveness. One critical lesson from past experiences is the need for cooperation and common objectives among the IAEA, the developer, and the facility operator, to create a successful, cost effective system. Recent USSP C/S activities include Rokkasho Reprocessing Plant safeguard systems, production of a new shift register, numerous vulnerability assessments of C/S systems, a conduit monitoring system which identifies tampering of IAEA conduit deployed in the field, fiber optic seal upgrades, unattended monitoring system software upgrades, next generation surveillance system which will upgrade existing camera systems, and support of the IAEA's development of the universal nondestructive assay data acquisition platform.

Quality Assurance Program Plan for TRUPACT-II Gas Generation Test Program

International Nuclear Information System (INIS)

2002-01-01

The Gas Generation Test Program (GGTP), referred to as the Program, is designed to establish the concentration of flammable gases and/or gas generation rates in a test category waste container intended for shipment in the Transuranic Package Transporter-II (TRUPACT-II). The phrase 'gas generationtesting' shall refer to any activity that establishes the flammable gas concentration or the flammable gas generation rate. This includes, but is not limited to, measurements performed directly on waste containers or during tests performed on waste containers. This Quality Assurance Program Plan (QAPP) documents the quality assurance (QA) and quality control (QC) requirements that apply to the Program. The TRUPACT-II requirements and technical bases for allowable flammable gas concentration and gas generation rates are described in the TRUPACT-II Authorized Methods for Payload Control (TRAMPAC).

Water Resistant Container Technical Basis Document for the TA-55 Criticality Safety Program

Energy Technology Data Exchange (ETDEWEB)

Smith, Paul Herrick [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Teague, Jonathan Gayle [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2015-04-30

Criticality safety at TA-55 relies on nuclear material containers that are water resistant to prevent significant amounts of water from coming into contact with fissile material in the event of a fire that causes a breach of glovevbox confinement and subsequent fire water ingress. A “water tight container” is a container that will not allow more than 50ml of water ingress when fully submerged, except when under sufficient pressure to produce structural discontinuity. There are many types of containers, welded containers, hermetically sealed containers, filtered containers, etc.

CONTAIN independent peer review

International Nuclear Information System (INIS)

Boyack, B.E.; Corradini, M.L.; Khatib-Rahbar, M.; Loyalka, S.K.; Smith, P.N.

1995-01-01

The CONTAIN code was developed by Sandia National Laboratories under the sponsorship of the US Nuclear Regulatory Commission (NRC) to provide integrated analyses of containment phenomena. It is used to predict nuclear reactor containment loads, radiological source terms, and associated physical phenomena for a range of accident conditions encompassing both design-basis and severe accidents. The code's targeted applications include support for containment-related experimental programs, light water and advanced light water reactor plant analysis, and analytical support for resolution of specific technical issues such as direct containment heating. The NRC decided that a broad technical review of the code should be performed by technical experts to determine its overall technical adequacy. For this purpose, a six-member CONTAIN Peer Review Committee was organized and a peer review as conducted. While the review was in progress, the NRC issued a draft ''Revised Severe Accident Code Strategy'' that incorporated revised design objectives and targeted applications for the CONTAIN code. The committee continued its effort to develop findings relative to the original NRC statement of design objectives and targeted applications. However, the revised CONTAIN design objectives and targeted applications. However, the revised CONTAIN design objectives and targeted applications were considered by the Committee in assigning priorities to the Committee's recommendations. The Committee determined some improvements are warranted and provided recommendations in five code-related areas: (1) documentation, (2) user guidance, (3) modeling capability, (4) code assessment, and (5) technical assessment

CONTAIN independent peer review

Energy Technology Data Exchange (ETDEWEB)

Boyack, B.E. [Los Alamos National Lab., NM (United States); Corradini, M.L. [Univ. of Wisconsin, Madison, WI (United States). Nuclear Engineering Dept.; Denning, R.S. [Battelle Memorial Inst., Columbus, OH (United States); Khatib-Rahbar, M. [Energy Research Inc., Rockville, MD (United States); Loyalka, S.K. [Univ. of Missouri, Columbia, MO (United States); Smith, P.N. [AEA Technology, Dorchester (United Kingdom). Winfrith Technology Center

1995-01-01

The CONTAIN code was developed by Sandia National Laboratories under the sponsorship of the US Nuclear Regulatory Commission (NRC) to provide integrated analyses of containment phenomena. It is used to predict nuclear reactor containment loads, radiological source terms, and associated physical phenomena for a range of accident conditions encompassing both design-basis and severe accidents. The code`s targeted applications include support for containment-related experimental programs, light water and advanced light water reactor plant analysis, and analytical support for resolution of specific technical issues such as direct containment heating. The NRC decided that a broad technical review of the code should be performed by technical experts to determine its overall technical adequacy. For this purpose, a six-member CONTAIN Peer Review Committee was organized and a peer review as conducted. While the review was in progress, the NRC issued a draft ``Revised Severe Accident Code Strategy`` that incorporated revised design objectives and targeted applications for the CONTAIN code. The committee continued its effort to develop findings relative to the original NRC statement of design objectives and targeted applications. However, the revised CONTAIN design objectives and targeted applications. However, the revised CONTAIN design objectives and targeted applications were considered by the Committee in assigning priorities to the Committee`s recommendations. The Committee determined some improvements are warranted and provided recommendations in five code-related areas: (1) documentation, (2) user guidance, (3) modeling capability, (4) code assessment, and (5) technical assessment.

Containment structure tendon investigation

International Nuclear Information System (INIS)

Fulton, J.F.; Murray, K.H.

1983-01-01

The paper describes an investigation into the possible causes of lower-than-predicted tendon forces which were measured during past tendon surveillances for a concrete containment. The containment is post tensioned by vertical tendons which are anchored into a rock foundation. The tendons were originally stressed in 1969, and lift-off tests were performed on six occasions subsequent to this date over a period of 11 years. The tendon forces measured in these tests were generally lower than predicted, and by 1979 the prestress level in the containment was only marginally above the design requirement. The tendons were retensioned in 1980, and by this time an investigation into the possible causes was underway. Potential causes investigated include the rock anchors and surrounding rock, elastomeric pad creep, wire stresses, thermal effects, stressing equipment and lift-off procedures, and wire stress relaxation. The investigation activities included stress relaxation testing of wires pulled from actual tendons. The stress relaxation test program included wire specimens at several different temperature and initial stress levels and the effect of a varying temperature history on the stress relaxation property of the wires. For purpose of future force predictions of the retensioned tendons, the test program included tests to determine the effect on stress relaxation due to restressing the wires after they had relaxed for 1000 hours and 10,000 hours. (orig./GL)

Coastal nonpoint pollution control program: Program development and approval guidance

International Nuclear Information System (INIS)

1993-01-01

The document, developed by NOAA and EPA, contains guidance for states in developing and implementing their coastal nonpoint pollutant source programs. It describes the requirements that must be met, including: the geographic scope of the program; the pollutant sources to be addressed; the types of management measures used; the establishment of critical areas; technical assistance, public participation, and administrative coordination; and, the process for program submission and Federal approval. The document also contains the criteria by which NOAA and EPA will review the states' submissions

Subseabed-disposal program: systems-analysis program plan

International Nuclear Information System (INIS)

Klett, R.D.

1981-03-01

This report contains an overview of the Subseabed Nuclear Waste Disposal Program systems analysis program plan, and includes sensitivity, safety, optimization, and cost/benefit analyses. Details of the primary barrier sensitivity analysis and the data acquisition and modeling cost/benefit studies are given, as well as the schedule through the technical, environmental, and engineering feasibility phases of the program

Simplified containment event tree analysis for the Sequoyah Ice Condenser containment

International Nuclear Information System (INIS)

Galyean, W.J.; Schroeder, J.A.; Pafford, D.J.

1990-12-01

An evaluation of a Pressurized Water Reactor (PER) ice condenser containment was performed. In this evaluation, simplified containment event trees (SCETs) were developed that utilized the vast storehouse of information generated by the NRC's Draft NUREG-1150 effort. Specifically, the computer programs and data files produced by the NUREG-1150 analysis of Sequoyah were used to electronically generate SCETs, as opposed to the NUREG-1150 accident progression event trees (APETs). This simplification was performed to allow graphic depiction of the SCETs in typical event tree format, which facilitates their understanding and use. SCETs were developed for five of the seven plant damage state groups (PDSGs) identified by the NUREG-1150 analyses, which includes: both short- and long-term station blackout sequences (SBOs), transients, loss-of-coolant accidents (LOCAs), and anticipated transient without scram (ATWS). Steam generator tube rupture (SGTR) and event-V PDSGs were not analyzed because of their containment bypass nature. After being benchmarked with the APETs, in terms of containment failure mode and risk, the SCETs were used to evaluate a number of potential containment modifications. The modifications were examined for their potential to mitigate or prevent containment failure from hydrogen burns or direct impingement on the containment by the core, (both factors identified as significant contributors to risk in the NUREG-1150 Sequoyah analysis). However, because of the relatively low baseline risk postulated for Sequoyah (i.e., 12 person-rems per reactor year), none of the potential modifications appear to be cost effective. 15 refs., 10 figs. , 17 tabs

Selection of 3013 Containers for Field Surveillance. Fiscal Year 2016 Update

Energy Technology Data Exchange (ETDEWEB)

Kelly, Elizabeth J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Berg, John M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Cheadle, Jesse [Savannah River Nuclear Solutions, LLC, (SRNS), Aiken, SC (United States); McClard, James [Project Services Group LLC, Suwanee, GA (United States); Veirs, Douglas Kirk [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-04-19

This update is the eighth in a series of reports that document the binning and sample selection of 3013 containers for the Field Surveillance program as part of the Integrated Surveillance Program. This report documents changes made to both the container binning assignments and the sample selection approach. Binning changes documented in this update are a result of changes to the prompt gamma calibration curves and the reassignment of a small number of Hanford items from the Pressure bin to the Pressure and Corrosion (P&C) bin. Field Surveillance sample selection changes are primarily a result of focusing future destructive examinations (DEs) on the potential for stress corrosion cracking in higher moisture containers in the P&C bin. The decision to focus the Field Surveillance program on higher moisture items is based on findings from both the Shelf-life testing program and DEs.

La dorsal NE de Tenerife: hacia un modelo del origen y evolución de los rifts de islas oceánicas

Directory of Open Access Journals (Sweden)

Delcamp, A.

2009-06-01

Full Text Available The NE Rift of Tenerife is an excellent example of a persistent, recurrent rift, providing important evidence of the origin and dynamics of these major volcanic features. The rift developed in three successive, intense and relatively short eruptive stages (a few hundred ka, separated by longer periods of quiescence or reduced activity: A Miocene stage (7266 ± 156 ka, apparently extending the central Miocene shield of Tenerife towards the Anaga massif; an Upper Pliocene stage (2710 ± 58 ka and the latest stage, with the main eruptive phase in the Pleistocene. Detailed geological (GIS mapping, geomagnetic reversal mapping and stratigraphic correlation, and radioisotopic (K/Ar dating of volcanic formations allowed the reconstruction of the latest period of rift activity. In the early phases of this stage the majority of the eruptions grouped tightly along the axis of the rift and show reverse polarity (corresponding to the Matuyama chron. Dykes are of normal and reverse polarities. In the final phase of activity, eruptions are more disperse and lavas and dykes are consistently of normal polarity (Brunhes chron. Volcanic units of normal polarity crossed by dykes of normal and reverse polarities yield ages apparently compatible with normal subchrons (M-B Precursor and Jaramillo in the Upper Matuyama chron. Three lateral collapses successively mass-wasted the rift: The Micheque collapse, completely concealed by subsequent nested volcanism, and the Güímar and La Orotava collapses, that are only partially filled. Time occurrence of collapses in the NE rift apparently coincides with glacial stages, suggesting that giant landslides may be finally triggered by sea level chan-ges during glaciations. Pre-collapse and nested volcanism is predominantly basaltic, except in the Micheque collapse, where magmas evolved towards intermediate and felsic (trachytic compositions. Rifts in the Canary Islands are long-lasting, recurrent features, probably related to

Ensuring the 50 year life of a fissile material container

International Nuclear Information System (INIS)

Glass, R.E.; Towne, T.L.

1997-12-01

Sandia was presented with an opportunity in 1993 to design containers for the long term storage and transport of fissile material. This program was undertaken at the direction of the US Department of Energy and in cooperation with Lawrence Livermore National Laboratory and Los Alamos National Laboratory which were tasked with developing the internal fixturing for the contents. The hardware is being supplied by Allied Signal Federal Manufacturing and Technologies, and the packaging will occur at Mason and Hangar Corporation's Pantex Plant. The unique challenge was to design a container that could be sealed with the fissile material contents; and, anytime during the next 50 years, the container could be transported with only the need for the pre-shipment leak test. This required not only a rigorous design capable of meeting the long term storage and transportation requirements, but also resulted in development of a surveillance program to ensure that the container continues to perform as designed over the 50-year life. This paper addresses the design of the container, the testing that was undertaken to demonstrate compliance with US radioactive materials transport regulations, and the surveillance program that has been initiated to ensure the 50-year performance

Selection of 3013 Containers for Field Surveillance

International Nuclear Information System (INIS)

Larry Peppers; Elizabeth Kelly; James McClard; Gary Friday; Theodore Venetz; Jerry Stakebade

2007-01-01

This report revises and combines three earlier reports dealing with the binning, statistical sampling, and sample selection of 3013 containers for field surveillance. It includes changes to the binning specification resulting from completion of the Savannah River Site packaging campaign and new information from the shelf-life program and field surveillance activities. The revised bin assignments result in changes to the random sample specification. These changes are necessary to meet the statistical requirements of the surveillance program. This report will be reviewed regularly and revised as needed. Section 1 of this report summarizes the results of an extensive effort to assign all of the current and projected 3013 containers in the Department of Energy (DOE) inventory to one of three bins (Innocuous, Pressure and Corrosion, or Pressure) based on potential failure mechanisms. Grouping containers into bins provides a framework to make a statistical selection of individual containers from the entire population for destructive and nondestructive field surveillance. The binning process consisted of three main steps. First, the packaged containers were binned using information in the Integrated Surveillance Program database and a decision tree. The second task was to assign those containers that could not be binned using the decision tree to a specific bin using container-by-container engineering review. The final task was to evaluate containers not yet packaged and assign them to bins using process knowledge. The technical basis for the decisions made during the binning process is included in Section 1. A composite decision tree and a summary table show all of the containers projected to be in the DOE inventory at the conclusion of packaging at all sites. Decision trees that provide an overview of the binning process and logic are included for each site. Section 2 of this report describes the approach to the statistical selection of containers for surveillance and

Menu-Driven Solver Of Linear-Programming Problems

Science.gov (United States)

Viterna, L. A.; Ferencz, D.

1992-01-01

Program assists inexperienced user in formulating linear-programming problems. A Linear Program Solver (ALPS) computer program is full-featured LP analysis program. Solves plain linear-programming problems as well as more-complicated mixed-integer and pure-integer programs. Also contains efficient technique for solution of purely binary linear-programming problems. Written entirely in IBM's APL2/PC software, Version 1.01. Packed program contains licensed material, property of IBM (copyright 1988, all rights reserved).

Nuclear Resonance Fluorescence and Isotopic Mapping of Containers

Science.gov (United States)

Johnson, Micah S.; McNabb, Dennis P.

2009-03-01

National security programs have expressed interest in developing systems to isotopically map shipping containers, fuel assemblies, and waste barrels for various materials including special nuclear material (SNM). Current radiographic systems offer little more than an ambiguous density silhouette of a container's contents. In this paper we will present a system being developed at LLNL to isotopically map containers using the nuclear resonance fluorescence (NRF) method. Recent experimental measurements on NRF strengths in SNM are discussed.

Performance of Sequoyah Containment Anchorage System

International Nuclear Information System (INIS)

Fanous, F.; Greimann, L.; Wassef, W.; Bluhm, D.

1993-01-01

Deformation of a steel containment anchorage system during a severe accident may result in a leakage path at the containment boundaries. Current design criteria are based on either ductile or brittle failure modes of headed bolts that do not account for factors such as cracking of the containment basemat or deformation of the anchor bolt that may affect the behavior of the containment anchorage system. The purpose of this study was to investigate the performance of a typical ice condenser containment's anchorage system. This was accomplished by analyzing the Sequoyah Containment Anchorage System. Based on a strength of materials approach and assuming that the anchor bolts are resisting the uplift caused by the internal pressure, one can estimate that the failure of the anchor bolts would occur at a containment pressure of 79 psig. To verify these results and to calibrate the strength of materials equation, the Sequoyah containment anchorage system was analyzed with the ABAQUS program using a three-dimensional, finite-element model. The model included portions of the steel containment building, shield building, anchor bolt assembly, reinforced concrete mat and soil foundation material

Large-scale experiments on aerosol behavior in light water reactor containments

International Nuclear Information System (INIS)

Schock, W.; Bunz, H.; Adams, R.E.; Tobias, M.L.; Rahn, F.J.

1988-01-01

Recently, three large-scale experimental programs were carried out dealing with the behavior of aerosols during core-melt accidents in light water reactors (LWRs). In the Nuclear Safety Pilot Plant (NSPP) program, the principal behaviors of different insoluble aerosols and of mixed aerosols were measured in dry air atmospheres and in condensing steam-air atmospheres contained in a 38-m/sup 3/ steel vessel. The Demonstration of Nuclear Aerosol Behavior (DEMONA) program used a 640-m/sup 3/ concrete containment model to simulate typical accident sequence conditions, and measured the behavior of different insoluble aerosols and mixed aerosols in condensing and transient atmospheric conditions. Part of the LWR Aerosol Containment Experiments (LACE) program was also devoted to aerosol behavior in containment; and 852-m/sup 3/ steel vessel was used, and the aerosols were composed of mixtures of insoluble and soluble species. The results of these experiments provide a suitable data base for validation of aerosol behavior codes. Fundamental insight into details of aerosol behavior in condensing environments has been gained through the results of the NSPP tests. Code comparisons have been and are being performed in the DEMONA and LACE experiments

Containment pressure analysis model using CONTEMPT-LT

International Nuclear Information System (INIS)

Gupta, R.N.

1975-09-01

An analytical model for evaluating the reactor containment pressure transient following a loss-of-coolant accident (LOCA) is presented. The model uses the CONTEMPT-LT computer program developed by Aerojet Nuclear Company. The sample problem studied is the containment response following the most severe postulated LOCA at the Yankee Rowe Nuclear Power Station. The results show good agreement with the response predicted by Westinghouse Electric Corporation. (auth)

Containment long-term operational integrity--a 1988 status report

International Nuclear Information System (INIS)

Sammataro, R.F.

1988-01-01

Design and in-service codes and standards provide a comprehensive set of requirements for containment design, construction, inspection, testing and repair. Metal and concrete containments must be designed, fabricated, constructed, inspected, tested and maintained to quality standards commensurate with the importance of the safety function to be performed. Periodic integrated leak rate tests are required to assure that containments continue to meet allowable leakage limits. Although overall performance has been quite good to date, several major containment aging and degradation mechanisms have been identified. Two pilot plant life extension studies, one for a boiling water reactor and one for a pressurized water reactor, serve as models for extending the operational integrity of present containments in the United States. Research and testing programs for determining the ultimate pressure capacity and failure mechanisms for containments under severe loading conditions and studied for extending the life of current plants beyond the present 40 year licensed lifetime are underway. This paper presents an overview of containment designs in the USA and a discussion of the regulatory and ASME Code requirements for the design, construction, in-service inspection, testing and repair for containments. Findings for containments from the pilot plant life extension studies and the ongoing containment research and testing programs are also discussed. The regulatory and ASME Code requirements for design, construction, in-service inspection and periodic integrated leakage testing together with recommendations from the plant life extension studies and containment integrity research and testing provide a basis for continued containment long-term operational integrity

Simplified safety and containment systems for the iris reactor

International Nuclear Information System (INIS)

Conway, L.E.; Lombardi, C.; Ricotti, M.; Oriani, L.

2001-01-01

The IRIS (International Reactor Innovative and Secure) is a 100 - 300 MW modular type pressurized water reactor supported by the U.S. DOE NERI Program. IRIS features a long-life core to provide proliferation resistance and to reduce the volume of spent fuel, as well as reduce maintenance requirements. IRIS utilizes an integral reactor vessel that contains all major primary system components. This integral reactor vessel makes it possible to reduce containment size; making the IRIS more cost competitive. IRIS is being designed to enhance reactor safety, and therefore a key aspect of the IRIS program is the development of the safety and containment systems. These systems are being designed to maximize containment integrity, prevent core uncover following postulated accidents, minimize the probability and consequences of severe accidents, and provide a significant simplification over current safety system designs. The design of the IRIS containment and safety systems has been identified and preliminary analyses have been completed. The IRIS safety concept employs some unique features that minimize the consequences of postulated design basis events. This paper will provide a description of the containment design and safety systems, and will summarize the analysis results. (author)

Reliability of containment and safety-related structures

International Nuclear Information System (INIS)

Nessim, M.A.

1995-09-01

A research program on Reliability of Containment and Safety-related Structures has been developed and is described in this document. This program is designed to support AECB's regulatory activities aimed at ensuring the safety of these structures. These activities include evaluating submissions by operators and requesting special assessments when necessary. The results of the proposed research will also be useful in revising and enhancing the CSA design standards for containment and safety-related structures. The process of developing the research program started with an information collection and review phase. The sources of information included C-FER's previous work in the area, various recent research publications, regulatory documents and relevant design standards, and a detailed discussion with AECB staff. The second step was to outline the process of reliability evaluation, and identify the required models and parameters. Comparison between the required and available information was used to identify gaps in the state-of-the-art, and the research program was designed to fill these gaps. The program is organized in four major topics, namely: development of an approach for reliability analysis; compilation and development of the required analysis tools; application to specific problems related to design, assessment, maintenance and testing of structures; and testing and validation. It is suggested that the program should be supported by an on-going process of communication and consultation between AECB staff and industry experts. This will lend credibility to the results and facilitate their future application. (author). 1 fig

Babcock and Wilcox revisions to CONTEMPT, computer program for predicting containment pressure-temperature response to a loss-of-coolant accident

International Nuclear Information System (INIS)

Hsii, Y.H.

1976-06-01

The CONTEMPT computer program predicts the pressure-temperature response of a single-volume reactor building to a loss-of-coolant accident. The report describes the analytical model used for the program. CONTEMPT assumes that the loss-of-coolant accident can be separated into two phases; the primary system blowdown and reactor building pressurization. The results of the blowdown analysis serve as the boundary conditions and are input to the CONTEMPT program. Thus, the containment model is only concerned with the pressure and temperature in the reactor building and the temperature distribution through the reactor building structures. The user is required to input the description of the discharge of coolant, the boiling of residual water by reactor decay heat, the superheating of steam passing through the core, and metal-water reactions. The reactor building is separated into liquid and vapor regions. Each region is in thermal equilibrium itself, but the two may not be in thermal equilibrium; the liquid and gaseous regions may have different temperatures. The reactor building is represented as consisting of several heat-conducting structures whose thermal behavior can be described by the one-dimensional multi-region heat conduction equation. The program also calculates building leakage and the effects of engineered safety features such as reactor building sprays, decay heat coolers, sump coolers, etc

1994 Solid waste forecast container volume summary

International Nuclear Information System (INIS)

Templeton, K.J.; Clary, J.L.

1994-09-01

This report describes a 30-year forecast of the solid waste volumes by container type. The volumes described are low-level mixed waste (LLMW) and transuranic/transuranic mixed (TRU/TRUM) waste. These volumes and their associated container types will be generated or received at the US Department of Energy Hanford Site for storage, treatment, and disposal at Westinghouse Hanford Company's Solid Waste Operations Complex (SWOC) during a 30-year period from FY 1994 through FY 2023. The forecast data for the 30-year period indicates that approximately 307,150 m 3 of LLMW and TRU/TRUM waste will be managed by the SWOC. The main container type for this waste is 55-gallon drums, which will be used to ship 36% of the LLMW and TRU/TRUM waste. The main waste generator forecasting the use of 55-gallon drums is Past Practice Remediation. This waste will be generated by the Environmental Restoration Program during remediation of Hanford's past practice sites. Although Past Practice Remediation is the primary generator of 55-gallon drums, most waste generators are planning to ship some percentage of their waste in 55-gallon drums. Long-length equipment containers (LECs) are forecasted to contain 32% of the LLMW and TRU/TRUM waste. The main waste generator forecasting the use of LECs is the Long-Length Equipment waste generator, which is responsible for retrieving contaminated long-length equipment from the tank farms. Boxes are forecasted to contain 21% of the waste. These containers are primarily forecasted for use by the Environmental Restoration Operations--D ampersand D of Surplus Facilities waste generator. This waste generator is responsible for the solid waste generated during decontamination and decommissioning (D ampersand D) of the facilities currently on the Surplus Facilities Program Plan. The remaining LLMW and TRU/TRUM waste volume is planned to be shipped in casks and other miscellaneous containers

Molecular phylogenetics of Micromeria (Lamiaceae) in the Canary Islands, diversification and inter-island colonization patterns inferred from nuclear genes.

Science.gov (United States)

Puppo, Pamela; Curto, Manuel; Gusmão-Guedes, Joana; Cochofel, Jaqueline; Pérez de Paz, Pedro Luis; Bräuchler, Christian; Meimberg, Harald

2015-08-01

Here we reconstruct the evolutionary history of Micromeria in the Canary Islands using eight nuclear markers. Our results show two centers of diversification for Micromeria, one in the eastern islands Gran Canaria and Lanzarote, the other in the western islands, Tenerife, La Palma and El Hierro. Suggested directions of inter-island colonization are the following: Gran Canaria to Lanzarote and La Gomera; Tenerife to La Palma (from the paleoisland of Teno), to El Hierro (from the younger, central part), and to La Gomera and Madeira (from the paleoislands). Colonization of La Gomera probably occurred several times from Gran Canaria and Tenerife. The taxonomic implications of these results are discussed. Incongruence among the different markers was evaluated and, using next generation sequencing, we investigated if this incongruence is due to gene duplication. Copyright © 2015 Elsevier Inc. All rights reserved.

Memory operation mechanism of fullerene-containing polymer memory

Energy Technology Data Exchange (ETDEWEB)

Nakajima, Anri, E-mail: anakajima@hiroshima-u.ac.jp; Fujii, Daiki [Research Institute for Nanodevice and Bio Systems, Hiroshima University, 1-4-2 Kagamiyama, Higashihiroshima, Hiroshima 739-8527 (Japan)

2015-03-09

The memory operation mechanism in fullerene-containing nanocomposite gate insulators was investigated while varying the kind of fullerene in a polymer gate insulator. It was cleared what kind of traps and which positions in the nanocomposite the injected electrons or holes are stored in. The reason for the difference in the easiness of programming was clarified taking the role of the charging energy of an injected electron into account. The dependence of the carrier dynamics on the kind of fullerene molecule was investigated. A nonuniform distribution of injected carriers occurred after application of a large magnitude programming voltage due to the width distribution of the polystyrene barrier between adjacent fullerene molecules. Through the investigations, we demonstrated a nanocomposite gate with fullerene molecules having excellent retention characteristics and a programming capability. This will lead to the realization of practical organic memories with fullerene-containing polymer nanocomposites.

Special closure for radioactive shipping container

International Nuclear Information System (INIS)

Otts, J.V.

1976-03-01

The objective of this program was to develop a special lid closure for radioactive material shipping containers, typically steel drums. Three closure techniques were designed, fabricated, and proven to be structurally adequate to protect 1000 lb when dropped 30 ft. The three designs were (1) a 6-in. lid extension (skirt), (2) a 6-in. inner lid, and (3) c-clamps used at the container/lid interface. Based upon structural integrity, economic impact, and minimal design change, the 6-in. lid extension is recommended

Non-Controlled Biogenic Emission of CO, H2S, NH3 and Hg0 from Lazareto's Landfill, Tenerife, Canary Islands

Science.gov (United States)

Nolasco, D.; Lima, R.; Salazar, J.; Hernández, P. A.; Pérez, N. M.

2002-12-01

Landfills are important sources of contaminant gases to the surrounding environment and a significant amount of them could be released to the atmosphere through the surface environment in a diffuse form, also known as non-controlled emission of landfill gases. CH4 and CO2 are major components in landfill gases and other gas species are only present in minor amounts. Trace compounds include both inorganic and a large number of volatile organic components. The goal of this study is to evaluate the non-controlled biogenic emission of inorganic toxic gases from Lazareto's landfill. Which is located in the city of Santa Cruz de Tenerife, with a population of about 150,000, and is used as a Palm tree park. Lazareto's landfill has an extension of 0.22 Km2 and it is not operative since 1980. A non-controlled biogenic gas emission survey of 281 sampling sites was carried out from February tod March, 2002. Surface CO2 efflux measurements were performed by means of a portable NDIR sensor according with the accumulation chamber method. Surface CO2 efflux ranged from negligible values up to 30,600 gm-2d-1. At each sampling site, surface landfill gas samples were collected at 40 cm depth using a metallic soil probe. These gas samples were analyzed within 24 hours for major and inorganic toxic gas species by means of microGC and specific electrochemical sensors. The highest concentrations of CO, H2S, NH3 and Hg0 were 3, 20, 2,227, 0.010 ppmV, respectively. Non-controlled biogenic emission rate of CO, H2S, NH3, and Hg0 were estimated by multiplying the observed surface CO2 efflux times (Inorganic Toxic Gas)i/CO2 weight ratio at each sampling site, respectively. The highest surface inorganic toxic gas efllux rates were 699 gm-2d-1 for NH3, 81, 431 and 4 mgm-2d-1 for CO, H2S and Hg0, respectively. Taking into consideration the spatial distribution of the inorganic toxic gas efflux values as well as the extension of the landfill, the non-controlled biogenic emission of CO, H2S, NH3

24 CFR 35.135 - Use of paint containing lead.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Use of paint containing lead. 35... Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES General Lead-Based Paint Requirements and Definitions for All Programs. § 35.135 Use of paint containing lead. (a...

Perspectives on containment performance improvement based on the IPEs

Energy Technology Data Exchange (ETDEWEB)

Lehner, J.R.; Lin, C.C.; Pratt, W.T. [Brookhaven National Lab., Upton, NY (United States)] [and others

1995-04-01

Generic Letter 88-20, {open_quotes}Individual Plant Examination (IPE) for Severe Accident Vulnerabilities - 10CFR 50.54(f),{close_quotes} was issued by the NRC on November 23, 1988. In addition to assessing the core damage frequency from severe accidents, licensees were requested to report the results of their analyses regarding containment performance. Supplements to the Generic Letter forwarded technical insights obtained by the NRC staff through its Containment Performance Improvement (CPI) program. At this time, most of the IPEs have been submitted by the licensees. In a follow-on effort to support regulatory activities, the NRC staff with assistance from Brookhaven National Laboratory, has initiated a program involving a global examination of the containment performance results documented in the IPEs. The objective is to identify insights of potential generic safety significance relative to plant design, operation and maintenance, as well as to assess response to the previously forwarded CPI insights. The containment performance results of the IPEs are being categorized for commonalities and differences for different reactor and containment types. Preliminary results show that not only differences in plant design but also the methods, data, boundary conditions, and assumptions used in the different IPEs have a major impact on the containment performance results obtained. This paper presents preliminary results regarding the differences in containment performance observed in the IPEs and discusses some of the underlying reasons for these differences.

Russian Containers for Transportation of Solid Radioactive Waste

International Nuclear Information System (INIS)

Petrushenko, V. G.; Baal, E. P.; Tsvetkov, D. Y.; Korb, V. R.; Nikitin, V. S.; Mikheev, A. A.; Griffith, A.; Schwab, P.; Nazarian, A.

2002-01-01

The Russian Shipyard ''Zvyozdochka'' has designed a new container for transportation and storage of solid radioactive wastes. The PST1A-6 container is cylindrical shaped and it can hold seven standard 200-liter (55-gallon) drums. The steel wall thickness is 6 mm, which is much greater than standard U.S. containers. These containers are fully certified to the Russian GOST requirements, which are basically identical to U.S. and IAEA standards for Type A containers. They can be transported by truck, rail, barge, ship, or aircraft and they can be stacked in 6 layers in storage facilities. The first user of the PST1A-6 containers is the Northern Fleet of the Russian Navy, under a program sponsored jointly by the U.S. DoD and DOE. This paper will describe the container design and show how the first 400 containers were fabricated and certified

Prestressed concrete nuclear reactor containment structures. Revision 3

International Nuclear Information System (INIS)

Reuter, H.R.; Chang-Lo, P.L.C.; Pfeifer, B.W.; Shah, G.H.; Whitcraft, J.S.

1975-02-01

A discussion of the techniques and procedures used for the design of prestressed concrete nuclear reactor containment structures is presented. A physical description of Bechtel designed containment structures is presented. The design bases and load combinations are given for anticipated conditions of service. Reference design documents which include industry codes, specifications, AEC Regulatory Guides, Bechtel Topical Reports and additional criteria as appropriate to containment design are listed. Stepwise procedures typically followed by Bechtel for design of containments is discussed and design examples are presented. A description of currently used analytical methods and the practical application of these methods for containment design is also presented. The principal containment construction materials are identified and codes of practice pertaining to construction procedures are listed. Preoperational structural testing procedures and post-operational surveillance programs are furnished along with results of tests on completed containment structures. (U.S.)

Autos, tires, aluminum, oil--and cost containment.

Science.gov (United States)

Friedman, E

1978-09-01

Faced with massive increases in the costs of the health care benefits they provide for their employees, many large U.S. corporations are becoming increasingly involved in efforts to contain health care costs. Often seeing their efforts as posing an alternative to direct federal government intervention, business leaders are implementing a wide range of programs, including specific arrangements with providers, education of hospital trustees who are also employees, and fitness and preventive medicine programs.

Risk-informed assessment of degraded containment structures

International Nuclear Information System (INIS)

Spencer, B.W.; Kunsman, D.M.; Graves, H.L.

2003-01-01

As nuclear power plants age, a number of degradation mechanisms may begin to affect the ability of critical containment structures to prevent radiation release during a severe accident. A research program is underway to quantify the effects of various types of containment degradation in a risk-informed manner. In this paper, corrosion is assumed to occur in the liner of a reinforced concrete containment at a 'typical' U.S. pressurized water reactor nuclear power plant, and its effect is investigated. Latin hypercube sampling is used in conjunction with finite element models of a typical steel-lined reinforced concrete containment to generate overpressurization fragilities of the containment with and without corrosion. An existing probabilistic risk assessment model of the plant is then used with these fragilities to determine the increase in risk caused by the corrosion. (author)

Volcanic volatile budgets and fluxes inferred from melt inclusions from post-shield volcanoes in Hawaii and the Canary Islands

Science.gov (United States)

Moore, L.; Gazel, E.; Bodnar, R. J.; Carracedo, J. C.

2017-12-01

Pre-eruptive volatile contents of volcanic melts recorded by melt inclusions are useful for estimating rates of deep earth ingassing and outgassing on geologic timescales. Ocean island volcanoes may erupt melts derived from recycled material and thus have implications regarding the degree to which volatile-bearing phases like magnesite can survive subduction and be recycled by intraplate magmatism. However, melt inclusions affected by degassing will not reflect the original volatile content of the primary melt. Post-shield ocean island volcanoes are thought to erupt volatile-rich melts that ascend quickly, crystallizing in deep reservoirs and are more likely to reflect the composition of the primary melt. In this study, we compare melt inclusions from post-shield volcanoes, Haleakala (East Maui, Hawaii) and Tenerife (Canary Islands), to estimate the volatile budgets of two presumably plume-related ocean-island settings. Melt inclusions from Haleakala contain up to 1.5 wt% CO2, up to 1.3 wt% H2O, and about 2000 ppm of S. The CO2 concentration is similar to estimates for primary CO2 concentrations for Hawaii, suggesting that the melt inclusions in this study trapped a melt that underwent minimal degassing. Assuming a melt production rate of 2 km3/ka for postshield Hawaiian volcanism, the average fluxes of CO2 and S are about 80 t/year and 10 t/year respectively. Melt inclusions from Tenerife contain up to 1 wt% CO2, up to 2 wt% H2O, and about 4000 ppm of S. Assuming a melt production rate of 0.8 km3/ka for the northeast rift zone of Tenerife, the average fluxes of CO2 and S are about 20 t/year and 8 t/year respectively. The concentration of CO2 is lower than estimates of the primary melt CO2 content based on CO2/Nb from El Hierro. This may indicate that the inclusions trapped a melt that had degassed significantly, or that some of the CO2 in the inclusions has been sequestered in carbonate daughter crystals, which were observed in abundance.

Free-drop analysis of the transport container for hydrogen isotopes

International Nuclear Information System (INIS)

Lee, M. S.; Hong, C. S.; Baek, S. W.; Ahn, D. H.; Kim, K. R.; Lee, S. H.; Lim, S. P.; Jung, H. S.

2002-01-01

The vessel used for the transport of radioactive materials, containing hydrogen isotopes is evaluated for hypothetical accident conditions according to national regulations. The computational analysis is a cost effective tool to minimize testing and streamline the regulatory procedures, and supports experimental programs to qualify the container for the safe transport of radioactive materials. The numerical analysis of 9m free-drop onto a flat unyielding, horizontal surface has been performed using the explicit finite element computer program ABAQUS. Especially free-drop simulations for 30.deg. C tilted condition is precisely estimated

CONTEMPT: computer program for predicting containment pressure-temperature response to a loss-of-coolant accident

International Nuclear Information System (INIS)

Hsii, Y.H.

1978-04-01

The CONTEMPT code is used by Babcock and Wilcox for containment analysis following a postulated loss of coolant accident. An additional model is described which is used for the calculation of long term post reflood mass and energy releases to the containment that is used for the containment design basis LOCA calculations. These calculations maximize the rate of energy flow to the containment. The mass and energy data are given to the containment designer for use in calculating the containment building design pressure and temperature and in sizing containment heat removal equipment

Cyclobutane-Containing Alkaloids: Origin, Synthesis, and Biological Activities

OpenAIRE

Sergeiko, Anastasia; Poroikov, Vladimir V; Hanuš, Lumir O; Dembitsky, Valery M

2008-01-01

Present review describes research on novel natural cyclobutane-containing alkaloids isolated from terrestrial and marine species. More than 60 biological active compounds have been confirmed to have antimicrobial, antibacterial, antitumor, and other activities. The structures, synthesis, origins, and biological activities of a selection of cyclobutane-containing alkaloids are reviewed. With the computer program PASS some additional biological activities are also predicted, which point toward ...

ERC Radiological Glovebag Program

International Nuclear Information System (INIS)

Nellesen, A.L.

1997-07-01

This document establishes the requirements and responsibilities for the standardized methods for installation, use, and dismantlement of glovebags within the Hanford Site Environmental Contractor Radiological Glovebag Program. This document addresses the following topics: Containment selection and fabrication, Glovebag fabrication, Containment installation and inspection, General glovebag containment work practices, Emergency situations, and Containment removal

Containment integrity analysis for the (W) advanced AP600

International Nuclear Information System (INIS)

Gagnon, A.F.; Howe, K.S.

1989-01-01

This paper reports that since 1987, Westinghouse has been performing containment cooling analyses in support of the Advanced AP600 plant design. This program was intended to verify the feasibility of the passive containment cooling system features of the AP600 design. To support this design, containment analyses of the AP600 containment for a large break LOCA and a large Steam Line Break were performed. The transient results indicate the feasibility of the passive containment design by demonstrating the capability to remove sufficient heat to limit containment atmosphere conditions to within acceptable limits following these postulated accidents. These results also indicate that the PCCS can reduce containment pressure to less than one-quarter design pressure at 24 hours following the most severe accident scenario thereby minimizing containment leakage concerns

Geodetic Volcano Monitoring Research in Canary Islands: Recent Results

Science.gov (United States)

Fernandez, J.; Gonzalez, P. J.; Arjona, A.; Camacho, A. G.; Prieto, J. F.; Seco, A.; Tizzani, P.; Manzo, M. R.; Lanari, R.; Blanco, P.; Mallorqui, J. J.

2009-05-01

The Canarian Archipelago is an oceanic island volcanic chain with a long-standing history of volcanic activity (> 40 Ma). It is located off the NW coast of the African continent, lying over a transitional crust of the Atlantic African passive margin. At least 12 eruptions have been occurred on the islands of Lanzarote, Tenerife and La Palma in the last 500 years. Volcanism manifest predominantly as basaltic strombolian monogenetic activity (whole archipelago) and central felsic volcanism (active only in Tenerife Island). We concentrate our studies in the two most active islands, Tenerife and La Palma. In these islands, we tested different methodologies of geodetic monitoring systems. We use a combination of ground- and space-based techniques. At Tenerife Island, a differential interferometric study was performed to detect areas of deformation. DInSAR detected two clear areas of deformation, using this results a survey-based GPS network was designed and optimized to control those deformations and the rest of the island. Finally, using SBAS DInSAR results weak spatial long- wavelength subsidence signals has been detected. At La Palma, the first DInSAR analysis have not shown any clear deformation, so a first time series analysis was performed detecting a clear subsidence signal at Teneguia volcano, as for Tenerife a GPS network was designed and optimized taking into account stable and deforming areas. After several years of activities, geodetic results served to study ground deformations caused by a wide variety of sources, such as changes in groundwater levels, volcanic activity, volcano-tectonics, gravitational loading, etc. These results proof that a combination of ground-based and space-based techniques is suitable tool for geodetic volcano monitoring in Canary Islands. Finally, we would like to strength that those results could have serious implications on the continuous geodetic monitoring system design and implementation for the Canary Islands which is under

Hydrogen transport in the containment

International Nuclear Information System (INIS)

Royl, P.; Mueller, C.; Travis, J.R.; Wilson, T.

1995-01-01

For the description of transport phenomena in water vapor/hydrogen mixtures released in nuclear meltdown accidents, an integrated analytical model is being developed for LWR containments. Thermal and mechanical loads due to recombination and combustion are to be calculable. The 3-dimensional GASFLOW code was taken over from LANL in exchange for HDR experimental results and Battelle BMC program results. (orig.)

Mathematical structure of ocean container transport systems; Kaiyo container yuso system no suriteki kozo ni tsuite

Energy Technology Data Exchange (ETDEWEB)

Shinkai, A [Kyushu University, Fukuoka (Japan). Faculty of Engineering; Chikushi, Y [Nippon Telegraph and Telephone Corp., Tokyo (Japan)

1997-10-01

Mathematical structure of a vessel arrangement program was discussed in order to learn roles of container ships in ocean transport systems among China, NIES/ASEAN countries and Japan. Formulation is possible on a mathematical handling method for sailing route connection diagrams between ports, a transport network to indicate container movements, a service network to indicate sailing routes, and a network generalizing them. This paper describes an analysis made on the container transport system between Japan and China, taken as an example. Four ports were selected each from Japan and China, and the statistical database for fiscals 1996 and 1994 was utilized to set models for: (a) the liner network system with transshipment at the port of Shanghai and (b) the cruising route system going through the ports of Yokohama, Nagoya and Kobe. A hypothesis was set that a consortium (coordinated ship allocation) can be implemented ideally and completely. The transport network (a) is lower by 10% in total cost than the transport network (b), resulting in 1.6 times greater productivity. Actual service network is closer to the network (b), but the system can be utilized for discussing guidelines on vessel arrangement programs with which shipping companies pursue better management efficiency under a condition that the consortium can be formed. 10 refs., 6 figs., 2 tabs.

Plutonium accident resistant container project

International Nuclear Information System (INIS)

Andersen, J.A.

1978-05-01

The PARC (plutonium accident resistant container) project resulted in the design, development, and certification testing of a crashworthy air-transportable plutonium package (shipping container) for certification by the USNRC. This PAT-1 (plutonium air transportable) package survives a very severe sequential test program of impact, crush, puncture, slash, burn, and water immersion. There is also an individual hydrostatic pressure test. The package has a payload mass capacity of 2 kg of PuO2 and a thermal capacity of 25 watts. The design rationale for very high energy absorption (impact, crush, puncture, and slash protection) with residual high-level fire protection, resulted in a reasonalby small air-transportable package, advancing the packaging state-of-art. Optimization design iterations were utilized in the areas of impact energy absorption and stress and thermal analysis. Package test results are presented in relation to radioactive materials containment acceptance criteria, shielding and criticality standards

77 FR 69508 - Inservice Inspection of Prestressed Concrete Containment Structures With Grouted Tendons

Science.gov (United States)

2012-11-19

... Containment Structures With Grouted Tendons AGENCY: Nuclear Regulatory Commission. ACTION: Regulatory guide... (RG) 1.90, ``Inservice Inspection of Prestressed Concrete Containment Structures with Grouted Tendons... appropriate surveillance program for prestressed concrete containment structures with grouted tendons...

Estudio espectroscópico y DRX de afloramientos terrestres volcánicos en la isla de Tenerife como posibles análogos de la geología marciana

Directory of Open Access Journals (Sweden)

Lalla, E. A.

2015-12-01

Full Text Available Several volcanic outcrops from Tenerife Island (Las Cañadas Caldera, historical volcanism and Gu.imar-Malpaís outcrop has been selected as a potential terrestrial analog for Mars, regarding the Martian mineralogy and its volcanic characteristic. Diverse alteration processes, including weathering and hydrothermal alteration have been detected in these volcanics environments, which could be considered as part of a model for the primitive volcanic activity of Mars. The selected materials have been measured by micro-Raman spectroscopy, XRD and Mössbauer spectroscopy. The results show the primary mineralogy comprises on olivine, pyroxene and feldspar. Also, a wide variety of alterational materials, including oxides, clay minerals and carbonates have been detected. The results have proven to be a starting point to develop research focused to the development of science instrumentation for planetary exploration in volcanic environments. The instrumentation used was primarily through twin prototypes applied in space exploration such as XRD (on board at the NASA-MSL-Curiosity mission, Mössbauer spectroscopy (on board at the NASA-MER mission and the future Raman instrument on ESA mission -ExoMars. In addition, the detected mineralogy is consistent with results reported on Mars. The Raman spectral analisys methods, characterization and identification, have been applied, where the analysis of the Raman profiles are extremely useful to clarify the geochemical origin of the mineral species. On the other hand, the results obtained by Raman have been confirmed by Mössbauer spectroscopy and X-ray diffraction.Se ha llevado a cabo una selección de varios afloramientos volcánicos en la Isla de Tenerife (La Caldera de las Cañadas, vulcanismo histórico y la zona del Malpaís de Gu.imar como posibles análogos terrestres de Marte, considerando los procesos volcánicos ocurridos durante algunas de las etapas geológicas del planeta rojo. En la selección de las

Mark II containment lead plant program load evaluation and acceptance criteria

International Nuclear Information System (INIS)

1978-10-01

The report, prepared by the Office of Nuclear Reactor Regulation, addresses the portion of the Mark II owner's program that provides a generic methodology for establishing design basis LOCA and safety relief valve loads for the lead Mark II facilities (Zimmer, Shoreham, and LaSalle), i.e., the lead plant program. The report includes an evaluation of the Mark II owner's load methodology, a description of load methodologies that we find acceptable for use in the individual plant unique assessments, and the basis for the stated conclusions

A composite-flywheel burst-containment study

Science.gov (United States)

Sapowith, A. D.; Handy, W. E.

1982-01-01

A key component impacting total flywheel energy storage system weight is the containment structure. This report addresses the factors that shape this structure and define its design criteria. In addition, containment weight estimates are made for the several composite flywheel designs of interest so that judgements can be made as to the relative weights of their containment structure. The requirements set down for this program were that all containment weight estimates be based on a 1 kWh burst. It should be noted that typical flywheel requirements for regenerative braking of small automobiles call for deliverable energies of 0.25 kWh. This leads to expected maximum burst energies of 0.5 kWh. The flywheels studied are those considered most likely to be carried further for operational design. These are: The pseudo isotropic disk flywheel, sometimes called the alpha ply; the SMC molded disk; either disk with a carbon ring; the subcircular rim with cruciform hub; and Avco's bi-directional circular weave disk.

Program and Abstracts: DOE Solar Program Review Meeting 2004, 25--28 October 2004, Denver, Colorado

Energy Technology Data Exchange (ETDEWEB)

2004-10-01

This booklet contains the agenda and abstracts for the 2004 U.S. DOE Solar Energy Technologies Program Review Meeting. The meeting was held in Denver, Colorado, October 25-28, 2004. More than 240 abstracts are contained in this publication. Topic areas for the research papers include laboratory research, program management, policy analysis, and deployment of solar technologies.

21 CFR 606.121 - Container label.

Science.gov (United States)

2010-04-01

... a blood donation. (iii) Benefits, such as time off from work, membership in blood assurance programs....” (10) Where applicable, the name and volume of source material. (11) The statement: “Caution: For... Evaluation and Research, the paper of the container label shall be white and print shall be solid black, with...

Mississippi Curriculum Framework for Computer Information Systems Technology. Computer Information Systems Technology (Program CIP: 52.1201--Management Information Systems & Business Data). Computer Programming (Program CIP: 52.1201). Network Support (Program CIP: 52.1290--Computer Network Support Technology). Postsecondary Programs.

Science.gov (United States)

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for two programs in the state's postsecondary-level computer information systems technology cluster: computer programming and network support. Presented in the introduction are program descriptions and suggested course…

Structural dynamics in LMFBR containment analysis: a brief survey of computational methods and codes

International Nuclear Information System (INIS)

Chang, Y.W.; Gvildys, J.

1977-01-01

In recent years, the use of computer codes to study the response of primary containment of large, liquid-metal fast breeder reactors (LMFBR) under postulated accident conditions has been adopted by most fast reactor projects. Since the first introduction of REXCO-H containment code in 1969, a number of containment codes have evolved and been reported in the literature. The paper briefly summarizes the various numerical methods commonly used in containment analysis in computer programs. They are compared on the basis of truncation errors resulting in the numerical approximation, the method of integration, the resolution of the computed results, and the ease of programming in computer codes. The aim of the paper is to provide enough information to an analyst so that he can suitably define his choice of method, and hence his choice of programs

3013/9975 Surveillance Program Interim Summary Report

Energy Technology Data Exchange (ETDEWEB)

Dunn, K.; Hackney, B.; McClard, J.

2011-06-22

The K-Area Materials Storage (KAMS) Documented Safety Analysis (DSA) requires a surveillance program to monitor the safety performance of 3013 containers and 9975 shipping packages stored in KAMS. The SRS surveillance program [Reference 1] outlines activities for field surveillance and laboratory tests that demonstrate the packages meet the functional performance requirements described in the DSA. The SRS program also supports the complexwide Integrated Surveillance Program (ISP) [Reference 2] for 3013 containers. The purpose of this report is to provide a summary of the SRS portion of the surveillance program activities through fiscal year 2010 (FY10) and formally communicate the interpretation of these results by the Surveillance Program Authority (SPA). Surveillance for the initial 3013 container random sampling of the Innocuous bin and the Pressure bin has been completed and there has been no indication of corrosion or significant pressurization. The maximum pressure observed was less than 50 psig, which is well below the design pressure of 699 psig for the 3013 container [Reference 3]. The data collected during surveillance of these bins has been evaluated by the Materials Identification and Surveillance (MIS) Working Group and no additional surveillance is necessary for these bins at least through FY13. A decision will be made whether additional surveillance of these bins is needed during future years of storage and as additional containers are generated. Based on the data collected to date, the SPA concludes that 3013 containers in these bins can continue to be safely stored in KAMS. This year, 13 destructive examinations (DE) were performed on random samples from the Pressure & Corrosion bin. To date, DE has been completed for approximately 30% of the random samples from the Pressure & Corrosion bin. In addition, DE has been performed on 6 engineering judgment (EJ) containers, for a total of 17 to date. This includes one container that exceeded the 3013

Network Design for Container Shipping Using Cutting Planes

DEFF Research Database (Denmark)

The network design problem in container shipping is of increasing importance in the strongly competitive markets where potential cost reductions are of the utmost importance. We combine the network design and fleet assignment problem into a mixed integer linear programming model minimizing the ov...... the fact that the route of a ship allows for subtours, we introduce the concept of pseudo-simple routes. To solve the problem we use a branch and cut solution method using clover and capacity cuts we defined for the problem.......The network design problem in container shipping is of increasing importance in the strongly competitive markets where potential cost reductions are of the utmost importance. We combine the network design and fleet assignment problem into a mixed integer linear programming model minimizing...... the overall cost. The real-life container shipping network design problem differs in several ways from the standard network design problem. Examples of these differences are the cyclic routes of vessels and the fact that a route is continuously sailed for a given forecast period. To model these real...

Modelling the Transport Process in Marine Container Technology

Directory of Open Access Journals (Sweden)

Serđo Kos

2003-01-01

Full Text Available The paper introduces a mathematical problem that occursin marine container technology when programming the transportof a beforehand established number of ISO containers effectedby a full container ship from several ports of departure toseveral ports of destination at the minimum distance (time innavigation or at minimum transport costs. The application ofthe proposed model may have an effect on cost reduction incontainer transport thereby improving the operation process inmarine transport technology. The model has been tested by usinga numerical example with real data. In particular, it describesthe application of the dual variables in the analysis ofoptimum solution.

Plutonium accident resistant container project

International Nuclear Information System (INIS)

Andersen, J.A.

1978-09-01

The PARC (plutonium accident resistant container) project resulted in the design, development, and certification testing of a crashworthy air-transportable plutonium package (shipping container) for certification by the USNRC (Nuclear Regulatory Commission). This PAT-1 (plutonium air transportable) package survives a very severe sequential test program of impact, crush, puncture, slash, burn, and water immersion. There is also an individual hydrostatic pressure test. The package has a payload mass capacity of 2 kg of PuO 2 and a thermal capacity of 25 watts. The design rationale for very high energy absorption (impact, crush, puncture, and slash protection) with residual high-level fire protection, resulted in a reasonably small air-transportable package, advancing the packaging state-of-art. Optimization design iterations were utilized in the areas of impact energy absorption and stress and thermal analysis. Package test results are presented in relation to radioactive materials containment acceptance criteria, shielding and criticality standards

NSF-RANN Trace Contaminants Program directory

International Nuclear Information System (INIS)

Purnell, P.A.; Smith, S.K.; Wilkes, C.F.

1976-10-01

This directory is designed to aid effective communication throughout the National Science Foundation's Trace Contaminants Program, Research Applied to National Needs. The majority of the participants in the Program are represented by name, address, telephone number, and a very brief description of research interest. The directory has five major divisions to facilitate its use. Section I contains a listing of the program managers associated with the NSF-RANN Trace Contaminants Program. Section II lists the principal investigators, co-principal investigators, and coordinators of each of the research grants in the Program. Section III lists the personnel by individual projects. Section IV contains a total alphabetic listing complete with project titles and Section V contains a keyword index. This directory is maintained by the Toxic Materials Information Center as part of the Environmental Resource Center of the Information Center Complex, Information Division, Oak Ridge National Laboratory

Research program on development of advanced treatment technology for americium-containing aqueous waste in NUCEF

Energy Technology Data Exchange (ETDEWEB)

Mineo, Hideaki; Matsumura, Tatsuro; Tsubata, Yasuhiro [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

1996-10-01

A research program was prepared on the development of an advanced treatment process for the americium-containing concentrated aqueous waste in NUCEF, than allows americium recovery for the reuse and the reduction of TRU waste generation. A preliminary analysis was conducted on the separation requirements based on the components estimated for the waste. An R and D strategy was proposed from the view to reduce TRU waste generated in the processing that the highest priority is given on the control of TRU leakage such as americium into the effluent stream after americium recovery and the minimization of salt used in the separation over the decontamination of impurities from americium. The extraction chromatographic method was selected as a candidate technology for americium separation under the principle to use reagents that are functional in acidic conditions such as bidentate extractants of DHEDECMP, CMPO or diamides, considering the larger flexibilities in process modification and possible multi-component separation with compact equipment and the past achievements on the recovery of kg quantities of americium. Major R and D items extracted are screening and evaluation of extractants for americium and plutonium, optimization of separation conditions, selection of denitration method, equipment developments and development of solidification methods of discarded americium after reuse and of various kinds of separation residues. In order to cope these items, four steps of R and D program were proposed, i.e., fundamental experiment in beaker-scale on screening and evaluation of extractants, flowsheet study in bench-scale using simulated and small amount of americium aqueous waste solution to evaluate candidate process, americium recovery test in iron-shielded cell to be installed in NUCEF. It is objected to make recovery of 100g orders of americium used for research on fundamental TRU fuel properties. (J.P.N.)

LWR containment safety research in PANDA

International Nuclear Information System (INIS)

Paladino, D.; Huggenberger, M.; Andreani, M.; Gupta, S.; Guentay, S.; Dreier, J.; Prasser, H.

2008-01-01

In the frame of the OECD/SETH-2 project, an experimental program is being carried out at PSI (PANDA Facility in Switzerland) and CEA (MISTRA Facility in France) with the aim of generating high-quality experimental data which will be used for improving modeling and for Lumped Parameter and 3D (CFD) code validations. The PANDA test program consists of seven types of test series, focusing on gas stratification break-up induced b) mass sources (simulating the release of steam and hydrogen), heat sources (simulating the energy) generated hydrogen-oxygen recombiner operation) or heat sinks (due to condensation of steam caused by containment coolers, sprays or 'cold' walls). Two series of PANDA tests are devoted to obtaining detailed data on the integral behavior of Passive Containment Cooling Systems (PCCS) of Advanced Light Water Reactors (ALWR) in the presence of different non-condensable gases (air; hydrogen) and also to investigating the gas mixing and stratification induced by the sudden interconnection of compartments with large gas concentration differences, e.g. the opening of rupture disks. (authors)

Containment performance of S-prism under severe BDB conditions

International Nuclear Information System (INIS)

Boardman, C.E.; Dubberley, A.E.; Hui, M.; Iwashige, K.

2001-01-01

S-PRISM is an advanced Fast Reactor plant design that utilizes compact modular pool-type reactors sized to enable factory fabrication and an affordable prototype test of a single Nuclear Steam Supply System (NSSS) for design certification at minimum cost and risk. Based on the success of the previous DOE sponsored Advanced Liquid Metal Reactor (ALMR) program GE has continued to develop and assess the technical viability and economic potential of an up-rated modular Fast Reactor called Super PRISM (S-PRISM). S-PRISM retains all of the key ALMR design features including passive reactor shutdown, passive shutdown heat removal, and passive reactor cavity cooling that were developed under an earlier DOE program. An additional feature of S-PRISM involves the use an innovative containment system that reduces the required design basis containment pressure by a factor of two through the use of a controlled venting system. The performance of this innovative containment system is evaluated and described in this paper. (author)

Mississippi Curriculum Framework for Welding and Cutting Programs (Program CIP: 48.0508--Welder/Welding Technologist). Postsecondary Programs.

Science.gov (United States)

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the welding and cutting programs cluster. Presented in the introductory section are a description of the program and suggested course sequence. Section I lists baseline competencies, and…

Plant life management of the ACR-1000 Concrete containment structure

International Nuclear Information System (INIS)

Abrishami, H.H.; Ricciuti, R.; Elgohary, M.

2009-01-01

The Ageing of reinforced concrete structures due to service conditions, aggressive environments, or accidents may cause their strength, serviceability and durability to decrease over time. For a new plant, a Plant Life Management (PLiM) program should start in the design process and then continues through the plant operation and decommissioning. Hence, PLiM must provide not only Ageing Management program (AMP) but also provide requirements on material characteristic and design criteria as well. The purpose of this paper is to present the Plant Life Management (PLiM) strategy for the concrete containment structure of the ACR-10001 (Advanced CANDU Reactor) designed by AECL. The ACR-1000 is designed for a 100-year plant life including 60-year operating life and an additional 40-year decommissioning period. The approach adopted for the PLiM strategy of the concrete containment structure is a preventive one, key areas being: 1) design methodology, 2) material performance and 3) ageing management program. During the design phase, in addition to strength and serviceability, durability, throughout the service life and decommissioning phase of the ACR-1000 structure, is a major consideration. Factors affecting durability design include: a) concrete performance, b) structural application, and c) consideration of environmental conditions. In addition to addressing the design methodology and material performance requirements, a systematic approach for the ageing management program for the concrete containment structure is presented. (authors)

Plutonium waste container identification

International Nuclear Information System (INIS)

Schmierer, T.J.

1979-01-01

The purpose of this paper is to define the parameters of a method for identifying plutonium waste containers. This information will form the basis for a permanent committee to develop a complete identification program for use throughout the world. Although a large portion of the information will be on handwritten notebooks and may not be as extensive as is desired, it will all be helpful. The final information will be programmed into computer language and be available to all interested parties as well as a central control committee which will have the expertise to provide each government with advice on the packaging, storage, and measurement of the waste for which it is responsible. As time progresses, this central control committee should develop permanent storage sites and establish a system of records which will last for hundreds of years

9th KES International Conference on Intelligent Interactive Multimedia Systems and Services

CERN Document Server

Gallo, Luigi; Howlett, Robert; Jain, Lakhmi; IIMSS-16; Intelligent Interactive Multimedia Systems and Services 2016

2016-01-01

This book contains the contributions presented at the ninth international KES conference on Intelligent Interactive Multimedia: Systems and Services, which took place in Puerto de la Cruz, Tenerife, Spain, June 15-17, 2016. It contains 65 peer-reviewed book chapters that focus on issues ranging from intelligent image or video storage, retrieval, transmission and analysis to knowledge-based technologies, from advanced information technology architectures for video processing and transmission to advanced functionalities of information and knowledge-based services. We believe that this book will serve as a useful source of knowledge for both academia and industry, for all those faculty members, research scientists, scholars, Ph.D. students and practitioners, who are interested in fundamental and applied facets of intelligent interactive multimedia.

3013/9975 Surveillance Program Interim Summary Report

International Nuclear Information System (INIS)

Dunn, K.; Hackney, B.; McClard, J.

2011-01-01

The K-Area Materials Storage (KAMS) Documented Safety Analysis (DSA) requires a surveillance program to monitor the safety performance of 3013 containers and 9975 shipping packages stored in KAMS. The SRS surveillance program (Reference 1) outlines activities for field surveillance and laboratory tests that demonstrate the packages meet the functional performance requirements described in the DSA. The SRS program also supports the complexwide Integrated Surveillance Program (ISP) (Reference 2) for 3013 containers. The purpose of this report is to provide a summary of the SRS portion of the surveillance program activities through fiscal year 2010 (FY10) and formally communicate the interpretation of these results by the Surveillance Program Authority (SPA). Surveillance for the initial 3013 container random sampling of the Innocuous bin and the Pressure bin has been completed and there has been no indication of corrosion or significant pressurization. The maximum pressure observed was less than 50 psig, which is well below the design pressure of 699 psig for the 3013 container (Reference 3). The data collected during surveillance of these bins has been evaluated by the Materials Identification and Surveillance (MIS) Working Group and no additional surveillance is necessary for these bins at least through FY13. A decision will be made whether additional surveillance of these bins is needed during future years of storage and as additional containers are generated. Based on the data collected to date, the SPA concludes that 3013 containers in these bins can continue to be safely stored in KAMS. This year, 13 destructive examinations (DE) were performed on random samples from the Pressure and Corrosion bin. To date, DE has been completed for approximately 30% of the random samples from the Pressure and Corrosion bin. In addition, DE has been performed on 6 engineering judgment (EJ) containers, for a total of 17 to date. This includes one container that exceeded the 3013

Containment accident analysis using CONTEMPT4/M0D2 compared with experimental data

International Nuclear Information System (INIS)

Metcalfe, L.J.; Hargroves, D.W.; Wells, R.A.

1978-01-01

CONTEMPT4/MOD2 is a new computer program developed to predict the long-term thermal hydraulic behavior of light-water reactor and experimental containment systems during postulated loss-of-coolant accident (LOCA) conditions. Improvements over previous containment codes include multicompartment capability and ice condenser analytical models. A program description and comparisons of calculated results with experimental data are presented

Implementing an Employee Assistance Program.

Science.gov (United States)

Gam, John; And Others

1983-01-01

Describes in detail the implementation of an employee assistance program in a textile plant. Reviews the historical development, referral process, and termination guidelines of the program and contains descriptive statistics for six periods of the program's operation. (Author/JAC)

Accelerated leach test development program

International Nuclear Information System (INIS)

Fuhrmann, M.; Pietrzak, R.F.; Heiser, J.; Franz, E.M.; Colombo, P.

1990-11-01

In FY 1989, a draft accelerated leach test for solidified waste was written. Combined test conditions that accelerate leaching were validated through experimental and modeling efforts. A computer program was developed that calculates test results and models leaching mechanisms. This program allows the user to determine if diffusion controls leaching and, if this is the case, to make projections of releases. Leaching mechanisms other than diffusion (diffusion plus source term partitioning and solubility limited leaching) are included in the program is indicators of other processes that may control leaching. Leach test data are presented and modeling results are discussed for laboratory scale waste forms composed of portland cement containing sodium sulfate salt, portland cement containing incinerator ash, and vinyl ester-styrene containing sodium sulfate. 16 refs., 38 figs., 5 tabs

Evaluation Of Plutonium Oxide Destructive Chemical Analyses For Validity Of Original 3013 Container Binning

International Nuclear Information System (INIS)

Mcclard, J.; Kessinger, G.

2010-01-01

The surveillance program for 3013 containers is based, in part, on the separation of containers into various bins related to potential container failure mechanisms. The containers are assigned to bins based on moisture content and pre-storage estimates of content chemistry. While moisture content is measured during the packaging of each container, chemistry estimates are made by using a combination of process knowledge, packaging data and prompt gamma analyses to establish the moisture and chloride/fluoride content of the materials. Packages with high moisture and chloride/fluoride contents receive more detailed surveillances than packages with less chloride/fluoride and/or moisture. Moisture verification measurements and chemical analyses performed during the surveillance program provided an opportunity to validate the binning process. Validation results demonstrated that the binning effort was generally successful in placing the containers in the appropriate bin for surveillance and analysis.

Simultaneous test construction by zero-one programming

NARCIS (Netherlands)

Boekkooi-Timminga, Ellen

1986-01-01

A method is described for simultaneous test construction using the Operations Research technique zero-one programming. The model for zero-one programming consists of two parts. The first contains the objective function that describes the aspect to be optimized. The second part contains the

The application of PLC in 60Co container inspection system

International Nuclear Information System (INIS)

Huang Yibin; Xiang Xincheng

2001-01-01

The author discusses the interlock technique of 60 Co container inspection system, and introduces the hardware structure and program of interlock control system using PLC. Due to adopting PLC distributed control, the system works stably and reliably. The successful application of PLC in 60 Co container inspection system has some use for reference in nuclear technology field

Learning Programming Technique through Visual Programming Application as Learning Media with Fuzzy Rating

Science.gov (United States)

Buditjahjanto, I. G. P. Asto; Nurlaela, Luthfiyah; Ekohariadi; Riduwan, Mochamad

2017-01-01

Programming technique is one of the subjects at Vocational High School in Indonesia. This subject contains theory and application of programming utilizing Visual Programming. Students experience some difficulties to learn textual learning. Therefore, it is necessary to develop media as a tool to transfer learning materials. The objectives of this…

A retrospective of the GREGOR solar telescope in scientific literature

Science.gov (United States)

Denker, C.; von der Lühe, O.; Feller, A.; Arlt, K.; Balthasar, H.; Bauer, S.-M.; Bello González, N.; Berkefeld, Th.; Caligari, P.; Collados, M.; Fischer, A.; Granzer, T.; Hahn, T.; Halbgewachs, C.; Heidecke, F.; Hofmann, A.; Kentischer, T.; Klva{ňa, M.; Kneer, F.; Lagg, A.; Nicklas, H.; Popow, E.; Puschmann, K. G.; Rendtel, J.; Schmidt, D.; Schmidt, W.; Sobotka, M.; Solanki, S. K.; Soltau, D.; Staude, J.; Strassmeier, K. G.; Volkmer, R.; Waldmann, T.; Wiehr, E.; Wittmann, A. D.; Woche, M.

2012-11-01

In this review, we look back upon the literature, which had the GREGOR solar telescope project as its subject including science cases, telescope subsystems, and post-focus instruments. The articles date back to the year 2000, when the initial concepts for a new solar telescope on Tenerife were first presented at scientific meetings. This comprehensive bibliography contains literature until the year 2012, i.e., the final stages of commissioning and science verification. Taking stock of the various publications in peer-reviewed journals and conference proceedings also provides the ``historical'' context for the reference articles in this special issue of Astronomische Nachrichten/Astronomical Notes.

Graphic Interface for LCP2 Optimization Program

DEFF Research Database (Denmark)

Nicolae, Taropa Laurentiu; Gaunholt, Hans

1998-01-01

This report provides information about the software interface that is programmed for the Optimization Program LCP2. The first part is about the general description of the program followed by a guide for using the interface. The last chapters contain a discussion about problems or futute extension...... of the project. The program is written in Visual C++5.0 on a Windows NT4.0 operating system.......This report provides information about the software interface that is programmed for the Optimization Program LCP2. The first part is about the general description of the program followed by a guide for using the interface. The last chapters contain a discussion about problems or futute extensions...

A new genus and species of Aclididae (Gastropoda) from off Tenerife, Canary Islands

NARCIS (Netherlands)

Moolenbeek, R.G.; Warén, A.

1987-01-01

Dr. Manuel Carrillo Pèrez (Universidad de la Laguna) has sent some dredge-samples to the first author. This material contained many interesting molluscs, not mentioned by Nordsieck & Talavera (1979). Amongst them was a very peculiar gastropod species, which was difficult to identify. Based on some

Caracterización del ambiente atmosférico en Las Palmas de Gran Canaria y Santa Cruz de Tenerife. 2000 a 2004

Directory of Open Access Journals (Sweden)

Elena López Villarrubia

2008-01-01

Full Text Available Fundamento: El carácter insular de las ciudades de Las Palmas de Gran Canaria y Santa Cruz de Tenerife, su meteorología y la proximidad del continente africano que favorece la llegada de material particulado de origen natural sobre las islas, determinan unas especificidades en su calidad del aire. El objetivo de este artículo es la caracterización de la contaminación atmosférica durante los años 2000 a 2004 como indicador de exposición de los habitantes de estas dos ciudades. Métodos: Se elaboraron los siguientes indicadores de contaminación: promedios de 24 horas de PM10, PM2,5, NO2, SO2 y O3; máximo de las 17 medias móviles octohorarias diarias de O3 y CO; máximo horario diario de SO2, NO2, O3, CO, PM10 y PM2,5. También se calcularon los niveles de la moda gruesa de partículas, como la diferencia entre los valores de PM10 y PM2,5 (PM10-2,5. Se identificaron episodios de intrusión africana. Resultados: En Sta Cruz de TF los promedios de SO2 (14ug/m3N y de O3 (44,4 ug/m3N fueron superiores respecto a los de Las Palmas de GC (8 y 28,3 ug/m3N. Los promedios de NO2 en Las Palmas de GC: 45,8 ug/m3N fueron superiores a los de Sta. Cruz de TF: 30,3 ug/m3N. Debido a las intrusiones africanas, algunos días superaron los 600 ug/m3 de PM10 y los 200 de PM2.5 en ambas ciudades. Conclusiones: Se identifica un patrón de calidad del aire con episodios de polvo mineral africano que en superficie afecta a todas las fracciones granulométricas, una estacionalidad diferente a las ciudades europeas respecto al ozono, así como un patrón de contaminación urbano-industrial en Sta. Cruz de Tf y netamente urbano en Las Palmas de GC. Se hace necesario tener en cuenta estos resultados para analizar su posible impacto sobre la salud de los ciudadanos de las Islas Canarias y establecer sistemas adecuados de vigilancia.

Computation programs for the thermofluidodynamic transient analysis in the containment system following a LOCA

International Nuclear Information System (INIS)

Gorlandi, A.; Mazzini, M.; Oriolo, F.

1979-01-01

This works briefly describes the features of the computation codes available at the Istituto di Impianti Nucleari of the Pisa University for the analysis of the thermofluidodynamic transient in the containment system of a nuclear power plant following a LOCA (RELAP 4/MOD.S, COMPARE, FUMO and CONTEMPT-LT/026). More details are contained in the Annex. Particular attention has been devoted to the opportunity to study, through the computation codes, the effects of the sub division of a full pressure containment system

Halon containers - to weigh or not to weigh

International Nuclear Information System (INIS)

Phillips, K.C.

1984-04-01

The National Fire Protection Association requires that the quantity of agent in Halon fire extinguishing systems be verified every six months. The accepted method for determining the quantity of agent has been weighing the containers. Because of problems involved with this method, such as the size of the containers, access, etc., the question what other alternatives are there to weighing halon containers has arisen. This report includes the evaluation and test program whereby the Fire Engineering Group selected and tested alternative methods: the thermal strip tape method, the infrared scanner, ultrasonics, and the radiation detector. Also evaluated, but not tested, were the dip stick method, the pressure supervision method, and weighing using a transducer. As a result of this program, it was determined that weighing is still the most positive method for determining agent quantity, but there are alternatives that can be used. The use of some of these alternatives will provide cost savings, time savings, and maintain the fire protection system in service. However, it will be important for the organization or company intending to use one of the alternative methods, to evaluate and make sure it is compatible with their particular halon protection system

Dental Assisting Program Standards.

Science.gov (United States)

Georgia Univ., Athens. Dept. of Vocational Education.

This publication contains statewide standards for the dental assisting program in Georgia. The standards are divided into 12 categories: foundations (philosophy, purpose, goals, program objectives, availability, evaluation); admissions (admission requirements, provisional admission requirements, recruitment, evaluation and planning); program…

Remote-Reading Safety and Safeguards Surveillance System for 3013 Containers

International Nuclear Information System (INIS)

Lechelt, W. M.; Skorpik, J. R.; Silvers, K. L.; Szempruch, R. W.; Douglas, D. G.; Fein, K. O.

2002-01-01

At Hanford's Plutonium Finishing Plant (PFP), plutonium oxide is being loaded into stainless steel containers for long-term storage on the Hanford Site. These containers consist of two weld-sealed stainless steel cylinders nested one within the other. A third container holds the plutonium within the inner cylinder. This design meets the U.S. Department of Energy (DOE) storage standard, DOE-STD- 3013-2000, which anticipates a 50-year storage lifetime. The 3013 standard also requires a container surveillance program to continuously monitor pressure and to assure safeguards are adequate. However, the configuration of the container system makes using conventional measurement and monitoring methods difficult. To better meet the 3013 monitoring requirements, a team from Fluor Hanford (who manages the PFP), Pacific Northwest National Laboratory (PNNL), and Vista Engineering Technologies, LLC, developed a safer, cost-efficient, remote PFP 3013 container surveillance system. This new surveillance system is a combination of two successfully deployed technologies: (1) a magnetically coupled pressure gauge developed by Vista Engineering and (2) a radio frequency (RF) tagging device developed by PNNL. This system provides continuous, 100% monitoring of critical parameters with the containers in place, as well as inventory controls. The 3013 container surveillance system consists of three main elements: (1) an internal magnetic pressure sensor package, (2) an instrument pod (external electronics package), and (3) a data acquisition storage and display computer. The surveillance system described in this paper has many benefits for PFP and DOE in terms of cost savings and reduced personnel exposure. In addition, continuous safety monitoring (i.e., internal container pressure and temperature) of every container is responsible nuclear material stewardship and fully meets and exceeds DOE's Integrated Surveillance Program requirements

Algorithmic differentiation of pragma-defined parallel regions differentiating computer programs containing OpenMP

CERN Document Server

Förster, Michael

2014-01-01

Numerical programs often use parallel programming techniques such as OpenMP to compute the program's output values as efficient as possible. In addition, derivative values of these output values with respect to certain input values play a crucial role. To achieve code that computes not only the output values simultaneously but also the derivative values, this work introduces several source-to-source transformation rules. These rules are based on a technique called algorithmic differentiation. The main focus of this work lies on the important reverse mode of algorithmic differentiation. The inh

State Energy Program Operations Manual

Energy Technology Data Exchange (ETDEWEB)

Office of Building Technology, State and Community Programs

1999-03-17

The State Energy Program Operations Manual is a reference tool for the states and the program officials at the U.S. Department of Energy's Office of Building Technology, State and Community Programs and Regional Support Offices as well as State Energy Offices. The Manual contains information needed to apply for and administer the State Energy Program, including program history, application rules and requirements, and program administration and monitoring requirements.

Linear genetic programming

CERN Document Server

Brameier, Markus

2007-01-01

Presents a variant of Genetic Programming that evolves imperative computer programs as linear sequences of instructions, in contrast to the more traditional functional expressions or syntax trees. This book serves as a reference for researchers, but also contains sufficient introduction for students and those who are new to the field

A chance-constrained stochastic approach to intermodal container routing problems.

Science.gov (United States)

Zhao, Yi; Liu, Ronghui; Zhang, Xi; Whiteing, Anthony

2018-01-01

We consider a container routing problem with stochastic time variables in a sea-rail intermodal transportation system. The problem is formulated as a binary integer chance-constrained programming model including stochastic travel times and stochastic transfer time, with the objective of minimising the expected total cost. Two chance constraints are proposed to ensure that the container service satisfies ship fulfilment and cargo on-time delivery with pre-specified probabilities. A hybrid heuristic algorithm is employed to solve the binary integer chance-constrained programming model. Two case studies are conducted to demonstrate the feasibility of the proposed model and to analyse the impact of stochastic variables and chance-constraints on the optimal solution and total cost.

75 FR 34941 - Review of the Commission's Program Access Rules and Examination of Programming Tying Arrangements

Science.gov (United States)

2010-06-21

... Commission's Program Access Rules and Examination of Programming Tying Arrangements AGENCY: Federal... Program Access Rules and Examination of Programming Tying Arrangements, MB Docket No. 07-198, FCC 10-17... information collection is contained in Sections 4(i), 303(r), and 628 of the Communications Act of 1934, as...

Dynamic response of the target container under pulsed heating

Energy Technology Data Exchange (ETDEWEB)

Liping Ni [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

1997-09-01

The structural mechanics of a liquid target container for pulsed spallation sources have been simulated using both a commercial code and a PSI-developed program. Results from the transient thermal-structural analysis showed that, due to inertia effects, the dynamic stress in the target container is contributed mainly from direct heating in the initial time stage, and later from the pressure wave in the target liquid once it reaches the wall. (author) figs., tab., refs.

Information managing in 60Co container inspection system

International Nuclear Information System (INIS)

Wu Zhifang; Gu Bohua; Zhou Liye; An Jigang; Liu Yisi

1998-01-01

The design, maintenance and realization of information managing database in 60 Co container inspection system made by INET of Tsinghua University is introduced. The technique of Open Database Connectivity (ODBC) is adopted to develop a general format database including text and graphic information. The database application is developed with Visual C ++ 5.0 programming language to run in 32-bit Windows operation system. It conforms to Client/Server model and supports network communication. It works very well in the laboratory emulator of 60 Co container inspection system

Non-controlled biogenic emissions to the atmosphere from Lazareto landfill, Tenerife, Canary Islands.

Science.gov (United States)

Nolasco, Dácil; Lima, R Noemí; Hernández, Pedro A; Pérez, Nemesio M

2008-01-01

[corrected] Historically, landfills have been the simplest form of eliminating urban solid waste with the minimum cost. They have been the most usual method for discarding solid waste. However, landfills are considered authentic biochemical reactors that introduce large amounts of contaminants into the environment in the form of gas and leachates. The dynamics of generation and the movement of gas in landfills depend on the input and output parameters, as well as on the structure of the landfill and the kind of waste. The input parameters include water introduced through natural or artificial processes, the characteristics of the urban solid waste, and the input of atmospheric air. The main output parameters for these biochemical reactors include the gases and the leachates that are potentially pollutants for the environment. Control systems are designed and installed to minimize the impact on the environment. However, these systems are not perfect and a significant amount of landfill gas could be released to the atmosphere through the surface in a diffuse form, also known as Non-controlled emission. In this paper, the results of the Non-controlled biogenic gas emissions from the Lazareto landfill in Tenerife, Canary Islands, are presented. The purpose of this study was to evaluate the concentration of CH4 and CO2 in the soil gas of the landfill cover, the CH4 and CO2 efflux from the surface of the landfill and, finally, to compare these parameters with other similar landfills. In this way, a better understanding of the process that controls biogenic gas emissions in landfills is expected. A Non-controlled biogenic gas emission survey of 281 sampling sites was carried out during February and March, 2002. The sampling sites were selected in order to obtain a well-distributed sampling grid. Surface landfill CO2 efflux measurements were carried out at each sampling site on the surface landfill together with soil gas collection and ground temperatures at a depth of 30

Mississippi Curriculum Framework for Banking & Finance Technology (Program CIP: 52.0803--Banking and Related Financial Programs, Other). Postsecondary Programs.

Science.gov (United States)

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the banking and finance technology program. Presented in the introduction are a program description and suggested course sequence. Section I is a curriculum guide consisting of outlines for…

Containment technology and the success of a joint initiative

International Nuclear Information System (INIS)

Campbell, H.J. Jr.

1997-01-01

This paper describes the efforts of the DuPont Company and DOE on containment of pollution. A test program at the Groundwater Remediation Field Laboratory National Test Site at Dover Air Force Base is discussed

Experimental data base for containment thermalhydraulic analysis

International Nuclear Information System (INIS)

Cheng, X.; Bazin, P.; Cornet, P.; Hittner, D.; Jackson, J.D.; Lopez Jimenez, J.; Naviglio, A.; Oriolo, F.; Petzold, H.

2001-01-01

This paper describes the joint research project DABASCO which is supported by the European Community under a cost-shared contract and participated by nine European institutions. The main objective of the project is to provide a generic experimental data base for the development of physical models and correlations for containment thermalhydraulic analysis. The project consists of seven separate-effects experimental programs which deal with new innovative conceptual features, e.g. passive decay heat removal and spray systems. The results of the various stages of the test programs will be assessed by industrial partners in relation to their applicability to reactor conditions

Containers for short-term storage of nuclear materials at the Los Alamos plutonium facility

International Nuclear Information System (INIS)

Hagan, R.; Gladson, J.

1997-01-01

The Los Alamos Plutonium Facility for the past 18 yr has stored nuclear samples for archiving and in support of nuclear materials research and processing programs. In the past several years, a small number of storage containers have been found in a deteriorated condition. A failed plutonium container can cause personnel contamination exposure and expensive physical area decontamination. Containers are stored in a physically secure radiation area vault, making close inspection costly in the form of personnel radiation exposure and work time. A moderate number of these containers are used in support of plutonium processing and must withstand daily handling abuse. A 2-yr evaluation of failed containers and those that have shown no deterioration has been conducted. Based on that study, a program was established to formalize our packing methods and materials and standardize the size and shape of containers that are used for short-term use. A standardized set of containers was designed, evaluated, tested, and procured for use in the facility. This paper reviews our vault storage problems, shows some failed containers, and presents our planned solutions to provide safe and secure containment of nuclear materials

Strain-based failure criteria for steel containments

International Nuclear Information System (INIS)

Fanous, F.; Greimann, L.F.

1989-01-01

The Containment Integrity Division of the Sandia National Laboratories (Sandia) has been conducting a program to evaluate the performance of containment buildings with internal pressure. Sandia has suggested that in the absence of leakage past penetrations, containment buildings will fail by rupturing after large plastic strains are developed up to ultimate strain of the material. This paper represents a portion of work conducted at Ames Laboratory for Sandia, the objective of which was to identify fabrication details that may affect the performance of a containment building. Construction drawings for nine steel containment buildings were surveyed, and several significant strain concentration regions were identified by using recommendations from Sandia and Section NE-3217 of the ASME Boiler and Pressure Vessel Code. These following regions were identified as: eccentricities in stiffener patterns around penetrations, eccentricities in containment shell middle surface, flat plate covers used on spare penetrations, containment base connection details, and containment heads. Examples of each of these regions were analyzed by the finite-element method, by simplified equations or both. In the case of middle surface eccentricities, the strains were found to be self-limiting. Even though flat plates have primary strains, they are typically designed so as not to control. Bolts in the base connection have primary strains and may control. The circumferential compressive strains introduced at the knuckle during buckling of the containment head grow as the pressure increases, but are somewhat restricted by the meridional tension. Finally, three analysis techniques and their associated failure criteria for the analysis of containment strength are introduced. (orig.)

"Slow the spread" a national program to contain the gypsy moth

Science.gov (United States)

Alexei A. Sharov; Donna Leonard; Andrew M. Liebhold; E. Anderson Roberts; Willard Dickerson; Willard Dickerson

2002-01-01

Invasions by alien species can cause substantial damage to our forest resources. The gypsy moth (Lymantria dispar) represents one example of this problem, and we present here a new strategy for its management that concentrates on containment rather than suppression of outbreaks. The "Slow the Spread" project is a combined federal and state...

DOE's Phytoremediation Program

International Nuclear Information System (INIS)

Levine, R.S.

1996-01-01

This presentation contains an outline of the US DOE's phytoremediation program. A brief overview of the goals, infrastructure, and results of the program is presented. Environmental contaminants addressed include chlorinated hydrocarbons, metals, radionuclides, inorganic wastes, and mixed hazardous and radioactive wastes. Studies of soil remediation using phytoextraction and water remediation using rhizofiltration are briefly described

Construction program management

CERN Document Server

Delaney, Joseph

2013-01-01

Although construction is one of the largest industries in the United States, it lags behind other industries in its implementation of modern management techniques such as those contained in the Standard for Program Management (the Standard) by the Project Management Institute (PMI(R)). Construction Program Management details the successful use of the PMI(R) approach for the construction of capital programs. It demonstrates, through case studies, how implementation of PMI's set of tools and techniques can improve the chances of program success. Exploring tactical and strategic management method

Containment and release management applied to a PWR ice condenser plant

International Nuclear Information System (INIS)

Lehner, J.; Neogy, P.

1991-01-01

As part of a US Nuclear Regulatory Commission program focusing on the accident management capabilities of operating nuclear plants, Brookhaven National Laboratory (BNL) is carrying out a series of studies of containment and release management (CRM) for each of the five containment types used in US commercial power plants. The purpose of CRM is to maintain the integrity of the containment as long as possible following a severe accident and minimize the release of radioactivity to the environment

ALPS - A LINEAR PROGRAM SOLVER

Science.gov (United States)

Viterna, L. A.

1994-01-01

Linear programming is a widely-used engineering and management tool. Scheduling, resource allocation, and production planning are all well-known applications of linear programs (LP's). Most LP's are too large to be solved by hand, so over the decades many computer codes for solving LP's have been developed. ALPS, A Linear Program Solver, is a full-featured LP analysis program. ALPS can solve plain linear programs as well as more complicated mixed integer and pure integer programs. ALPS also contains an efficient solution technique for pure binary (0-1 integer) programs. One of the many weaknesses of LP solvers is the lack of interaction with the user. ALPS is a menu-driven program with no special commands or keywords to learn. In addition, ALPS contains a full-screen editor to enter and maintain the LP formulation. These formulations can be written to and read from plain ASCII files for portability. For those less experienced in LP formulation, ALPS contains a problem "parser" which checks the formulation for errors. ALPS creates fully formatted, readable reports that can be sent to a printer or output file. ALPS is written entirely in IBM's APL2/PC product, Version 1.01. The APL2 workspace containing all the ALPS code can be run on any APL2/PC system (AT or 386). On a 32-bit system, this configuration can take advantage of all extended memory. The user can also examine and modify the ALPS code. The APL2 workspace has also been "packed" to be run on any DOS system (without APL2) as a stand-alone "EXE" file, but has limited memory capacity on a 640K system. A numeric coprocessor (80X87) is optional but recommended. The standard distribution medium for ALPS is a 5.25 inch 360K MS-DOS format diskette. IBM, IBM PC and IBM APL2 are registered trademarks of International Business Machines Corporation. MS-DOS is a registered trademark of Microsoft Corporation.

Multiple drug cost containment policies in Michigan's Medicaid program saved money overall, although some increased costs.

Science.gov (United States)

Kibicho, Jennifer; Pinkerton, Steven D

2012-04-01

Michigan's Medicaid program implemented four cost containment policies--preferred drug lists, joint and multistate purchasing arrangements, and maximum allowable cost--during 2002-04. The goal was to control growth of drug spending for beneficiaries who were enrolled in both Medicaid and Medicare and taking antihypertensive or antihyperlipidemic prescription drugs. We analyzed the impact of each policy while holding the effect of all other policies constant. Preferred drug lists increased both preferred and generic drugs' market share and reduced daily cost--the cost per day for each prescription provided to a beneficiary. In contrast, the maximum allowable cost policy increased daily cost and was the only policy that did not generate cost savings. The joint and multistate arrangements did not affect daily cost. Despite these policy trade-offs, the cumulative effect was a 10 percent decrease in daily cost and a total cost savings of $46,195 per year. Our findings suggest that policy makers need to evaluate the impact of multiple policies aimed at restraining drug spending, and further evaluate the policy trade-offs, to ensure that scarce public dollars achieve the greatest return for money spent.

Analysis of the metallic containment integrity of Angra I

International Nuclear Information System (INIS)

Costa, J.R.

1981-01-01

The main goal of this work is to evaluate the pressure and temperature long-term behavior inside the metalic containment of a PWR building subjected to a postulated loss-of-coolant accident. The computer program used was CONDRU 4. Calculations were made for Angra I plant assuming the ocurrence of the worst accident to the containment integrity. The results obtained from CONDRU were compared with those from CONTEMPT-LT and COCO, which are codes similar to CONDRU. (Author) [pt

Validity of scale modeling for large deformations in shipping containers

International Nuclear Information System (INIS)

Burian, R.J.; Black, W.E.; Lawrence, A.A.; Balmert, M.E.

1979-01-01

The principal overall objective of this phase of the continuing program for DOE/ECT is to evaluate the validity of applying scaling relationships to accurately assess the response of unprotected model shipping containers severe impact conditions -- specifically free fall from heights up to 140 ft onto a hard surface in several orientations considered most likely to produce severe damage to the containers. The objective was achieved by studying the following with three sizes of model casks subjected to the various impact conditions: (1) impact rebound response of the containers; (2) structural damage and deformation modes; (3) effect on the containment; (4) changes in shielding effectiveness; (5) approximate free-fall threshold height for various orientations at which excessive damage occurs; (6) the impact orientation(s) that tend to produce the most severe damage; and (7) vunerable aspects of the casks which should be examined. To meet the objective, the tests were intentionally designed to produce extreme structural damage to the cask models. In addition to the principal objective, this phase of the program had the secondary objectives of establishing a scientific data base for assessing the safety and environmental control provided by DOE nuclear shipping containers under impact conditions, and providing experimental data for verification and correlation with dynamic-structural-analysis computer codes being developed by the Los Alamos Scientific Laboratory for DOE/ECT

Contamination control using portable glove bags and containments

International Nuclear Information System (INIS)

Fink, C.

1994-01-01

Portable gloveboxes and containments have been used in the Navy Nuclear Power programs for many years. Their primary application has been to allow maintenance access to radioactive piping systems while limiting the spread of contamination to the immediate environment. The applications have spread to other areas of the nuclear industry and to other industries with similar contamination control problems. The general application is to keep the contaminants in, but other uses keep the contamination out. The devices can best be classified by material types and construction. They range from the relatively inexpensive polyethylene glove bags for asbestos removal to the semi-permanent aluminum and lexan hard-sided containment structures. There are free-standing open-quotes tentclose quotes structures, support ring devices and tube or bag designs. Only the cost seems to limit the size of these items. The key to the effective use of these devices lies in the planning and control of their application. Proper training of maintenance personnel will greatly facilitate their use, since the main objection seems to be in the exposure received during the rigging of these containments. When all of these considerations are accounted for, a program of contamination control can be quite successful. A brief description of the set-up and use of a specific application is described

Special Education Compliance: Program Review Standards and Indicators.

Science.gov (United States)

Missouri State Dept. of Elementary and Secondary Education, Jefferson City. Div. of Special Education.

This manual contains special education standards and indicators for educating children with disabilities in Missouri. It is divided into four main sections. Section 1 contains special education compliance standards based upon the federal Office of Special Education Programs Continuous Improvement Monitoring Program clusters and indicators. The…

34 CFR 74.24 - Program income.

Science.gov (United States)

2010-07-01

... 34 Education 1 2010-07-01 2010-07-01 false Program income. 74.24 Section 74.24 Education Office of... Program Management § 74.24 Program income. (a) The Secretary applies the standards contained in this section in requiring recipient organizations to account for program income related to projects financed in...

3rd international KES conference on Smart Education and Smart e-Learning

CERN Document Server

Howlett, Robert; Jain, Lakhmi

2016-01-01

This book contains the contributions presented at the 3rd international KES conference on Smart Education and Smart e-Learning, which took place in Puerto de la Cruz, Tenerife, Spain, June 15-17, 2016. It contains a total of 56 peer-reviewed book chapters that are grouped into several parts: Part 1 - Smart University: Conceptual Modeling, Part 2 – Smart Education: Research and Case Studies, Part 3 – Smart e-Learning, Part 4 – Smart Education: Software and Hardware Systems, and Part 5 – Smart Technology as a Resource to Improve Education and Professional Training. We believe that the book will serve as a useful source of research data and valuable information for faculty, scholars, Ph.D. students, administrators, and practitioners - those who are interested in innovative areas of smart education and smart e-learning. .

Ageing management of CANDUtm concrete containment buildings

International Nuclear Information System (INIS)

Philipose, K.E.; Gregor, F.E.

2009-01-01

The containment system in a Nuclear Power Plant (NPP) provides the final physical barrier against release of radioactive materials to the external environment. Even though there are different physical configurations to meet this fundamental safety function in various reactor types, a common feature is the use of a thick-walled concrete structure as part of the containment system commonly referred to as 'Concrete Containment Building'. In order for the concrete containment buildings to continue to provide the required safety function, it has to maintain its structural integrity. As well, its leak rates under test pressures must be maintained below acceptable limits. As some of the containment buildings of the CANDU nuclear power plants are approaching their fourth decade of successful operation, questions regarding the impact of ageing on their ultimate useful service life emerge. Ageing Management has become the tool for addressing those questions. In this paper, the ageing and ageing management of the CANDU concrete containments are discussed, including the specific programs being implemented to monitor and trend the ageing conditions. Specifically, the usefulness of the embedded strain gauges as a tool for the assessment of the condition of the containment concrete structure is discussed. Some of the operational and test data accumulated over the last 30 years have been evaluated and trended to provide some results and conclusions regarding the satisfactory long-term behaviour of the concrete containment buildings. (authors)

76 FR 60675 - Revision of the Commission's Program Carriage Rules

Science.gov (United States)

2011-09-29

... carriage of video programming vendors by multichannel video programming distributors (``MVPDs''), known as... and diversity in the video programming and video distribution markets. In this document, the FCC seeks... information is contained in contained in sections 4(i), 303(r), and 616 of the Communications Act of 1934, as...

Simulation of Containment Pressurization in a Large Break-Loss of Coolant Accident Using Single-Cell and Multicell Models and CONTAIN Code

Directory of Open Access Journals (Sweden)

Omid Noori-Kalkhoran

2016-10-01

Full Text Available Since the inception of nuclear power as a commercial energy source, safety has been recognized as a prime consideration in the design, construction, operation, maintenance, and decommissioning of nuclear power plants. The release of radioactivity to the environment requires the failure of multiple safety systems and the breach of three physical barriers: fuel cladding, the reactor cooling system, and containment. In this study, nuclear reactor containment pressurization has been modeled in a large break-loss of coolant accident (LB-LOCA by programming single-cell and multicell models in MATLAB. First, containment has been considered as a control volume (single-cell model. In addition, spray operation has been added to this model. In the second step, the single-cell model has been developed into a multicell model to consider the effects of the nodalization and spatial location of cells in the containment pressurization in comparison with the single-cell model. In the third step, the accident has been simulated using the CONTAIN 2.0 code. Finally, Bushehr nuclear power plant (BNPP containment has been considered as a case study. The results of BNPP containment pressurization due to LB-LOCA have been compared between models, final safety analysis report, and CONTAIN code’s results.

Simulation of containment pressurization in a large break-loss of coolant accident using single-cell and multicell models and CONTAIN code

International Nuclear Information System (INIS)

Kalkahoran, Omid Noori; Ahangari, Rohollah; Shirani, Amir Saied

2016-01-01

Since the inception of nuclear power as a commercial energy source, safety has been recognized as a prime consideration in the design, construction, operation, maintenance, and decommissioning of nuclear power plants. The release of radioactivity to the environment requires the failure of multiple safety systems and the breach of three physical barriers: fuel cladding, the reactor cooling system, and containment. In this study, nuclear reactor containment pressurization has been modeled in a large break-loss of coolant accident (LB-LOCA) by programming single-cell and multicell models in MATLAB. First, containment has been considered as a control volume (single-cell model). In addition, spray operation has been added to this model. In the second step, the single-cell model has been developed into a multicell model to consider the effects of the nodalization and spatial location of cells in the containment pressurization in comparison with the single-cell model. In the third step, the accident has been simulated using the CONTAIN 2.0 code. Finally, Bushehr nuclear power plant (BNPP) containment has been considered as a case study. The results of BNPP containment pressurization due to LB-LOCA have been compared between models, final safety analysis report, and CONTAIN code's results

Simulation of containment pressurization in a large break-loss of coolant accident using single-cell and multicell models and CONTAIN code

Energy Technology Data Exchange (ETDEWEB)

Kalkahoran, Omid Noori; Ahangari, Rohollah [Reactor Research School, Nuclear Science and Technology Research Institute, Tehran (Iran, Islamic Republic of); Shirani, Amir Saied [Faculty of Engineering, Shahid Beheshti University, Tehran (Iran, Islamic Republic of)

2016-10-15

Since the inception of nuclear power as a commercial energy source, safety has been recognized as a prime consideration in the design, construction, operation, maintenance, and decommissioning of nuclear power plants. The release of radioactivity to the environment requires the failure of multiple safety systems and the breach of three physical barriers: fuel cladding, the reactor cooling system, and containment. In this study, nuclear reactor containment pressurization has been modeled in a large break-loss of coolant accident (LB-LOCA) by programming single-cell and multicell models in MATLAB. First, containment has been considered as a control volume (single-cell model). In addition, spray operation has been added to this model. In the second step, the single-cell model has been developed into a multicell model to consider the effects of the nodalization and spatial location of cells in the containment pressurization in comparison with the single-cell model. In the third step, the accident has been simulated using the CONTAIN 2.0 code. Finally, Bushehr nuclear power plant (BNPP) containment has been considered as a case study. The results of BNPP containment pressurization due to LB-LOCA have been compared between models, final safety analysis report, and CONTAIN code's results.

The effects of age on nuclear power plant containment cooling systems

Energy Technology Data Exchange (ETDEWEB)

Lofaro, R.; Subudhi, M.; Travis, R.; DiBiasio, A.; Azarm, A. [Brookhaven National Lab., Upton, NY (United States); Davis, J. [Science Applications International Corp., New York, NY (United States)

1994-04-01

A study was performed to assess the effects of aging on the performance and availability of containment cooling systems in US commercial nuclear power plants. This study is part of the Nuclear Plant Aging Research (NPAR) program sponsored by the US Nuclear Regulatory Commission. The objectives of this program are to provide an understanding of the aging process and how it affects plant safety so that it can be properly managed. This is one of a number of studies performed under the NPAR program which provide a technical basis for the identification and evaluation of degradation caused by age. The effects of age were characterized for the containment cooling system by reviewing and analyzing failure data from national databases, as well as plant-specific data. The predominant failure causes and aging mechanisms were identified, along with the components that failed most frequently. Current inspection, surveillance, and monitoring practices were also examined. A containment cooling system unavailability analysis was performed to examine the potential effects of aging by increasing failure rates for selected components. A commonly found containment spray system design and a commonly found fan cooler system design were modeled. Parametric failure rates for those components in each system that could be subject to aging were accounted for in the model to simulate the time-dependent effects of aging degradation, assuming no provisions are made to properly manage it. System unavailability as a function of increasing component failure rates was then calculated.

The effects of age on nuclear power plant containment cooling systems

International Nuclear Information System (INIS)

Lofaro, R.; Subudhi, M.; Travis, R.; DiBiasio, A.; Azarm, A.; Davis, J.

1994-04-01

A study was performed to assess the effects of aging on the performance and availability of containment cooling systems in US commercial nuclear power plants. This study is part of the Nuclear Plant Aging Research (NPAR) program sponsored by the US Nuclear Regulatory Commission. The objectives of this program are to provide an understanding of the aging process and how it affects plant safety so that it can be properly managed. This is one of a number of studies performed under the NPAR program which provide a technical basis for the identification and evaluation of degradation caused by age. The effects of age were characterized for the containment cooling system by reviewing and analyzing failure data from national databases, as well as plant-specific data. The predominant failure causes and aging mechanisms were identified, along with the components that failed most frequently. Current inspection, surveillance, and monitoring practices were also examined. A containment cooling system unavailability analysis was performed to examine the potential effects of aging by increasing failure rates for selected components. A commonly found containment spray system design and a commonly found fan cooler system design were modeled. Parametric failure rates for those components in each system that could be subject to aging were accounted for in the model to simulate the time-dependent effects of aging degradation, assuming no provisions are made to properly manage it. System unavailability as a function of increasing component failure rates was then calculated

A New Approach to the Container Positioning Problem

DEFF Research Database (Denmark)

Ahmt, Jonas; Sigtenbjerggaard, Jonas Skott; Lusby, Richard Martin

Programming model that not only improves on earlier attempts at this problem, but also better reflects reality. In particular, the proposed model adopts a preference to reshuffle containers in line with a just-in-time concept, as it is assumed that data is more accurate the closer to a container’s scheduled...... for solving larger instances of the problem. We show that this new formulation drastically outperforms previous attempts at the problem through a direct comparison on instances available in the literature. Furthermore, we also show that the rolling horizon based heuristic can further reduce the solution time......In this paper the Container Positioning Problem is revisited. This problem arises at busy container terminals and requires one to minimize the use of block cranes in handling the containers that must wait at the terminal until their next means of transportation. We propose a new Mixed Integer...

NSF-RANN Trace Contaminants Program directory. [Personnel directory

Energy Technology Data Exchange (ETDEWEB)

Purnell, P.A.; Smith, S.K.; Wilkes, C.F.

1976-10-01

This directory is designed to aid effective communication throughout the National Science Foundation's Trace Contaminants Program, Research Applied to National Needs. The majority of the participants in the Program are represented by name, address, telephone number, and a very brief description of research interest. The directory has five major divisions to facilitate its use. Section I contains a listing of the program managers associated with the NSF-RANN Trace Contaminants Program. Section II lists the principal investigators, co-principal investigators, and coordinators of each of the research grants in the Program. Section III lists the personnel by individual projects. Section IV contains a total alphabetic listing complete with project titles and Section V contains a keyword index. This directory is maintained by the Toxic Materials Information Center as part of the Environmental Resource Center of the Information Center Complex, Information Division, Oak Ridge National Laboratory.

A survey of repair practices for nuclear power plant containment metallic pressure boundaries

Energy Technology Data Exchange (ETDEWEB)

Oland, C.B.; Naus, D.J. [Oak Ridge National Lab., TN (United States)

1998-05-01

The Nuclear Regulatory Commission has initiated a program at the Oak Ridge National Laboratory to provide assistance in their assessment of the effects of potential degradation on the structural integrity and leaktightness of metal containment vessels and steel liners of concrete containments in nuclear power plants. One of the program objectives is to identify repair practices for restoring metallic containment pressure boundary components that have been damaged or degraded in service. This report presents issues associated with inservice condition assessments and continued service evaluations and identifies the rules and requirements for the repair and replacement of nonconforming containment pressure boundary components by welding or metal removal. Discussion topics include base and welding materials, welding procedure and performance qualifications, inspection techniques, testing methods, acceptance criteria, and documentation requirements necessary for making acceptable repairs and replacements so that the plant can be returned to a safe operating condition.

A survey of repair practices for nuclear power plant containment metallic pressure boundaries

International Nuclear Information System (INIS)

Oland, C.B.; Naus, D.J.

1998-05-01

The Nuclear Regulatory Commission has initiated a program at the Oak Ridge National Laboratory to provide assistance in their assessment of the effects of potential degradation on the structural integrity and leaktightness of metal containment vessels and steel liners of concrete containments in nuclear power plants. One of the program objectives is to identify repair practices for restoring metallic containment pressure boundary components that have been damaged or degraded in service. This report presents issues associated with inservice condition assessments and continued service evaluations and identifies the rules and requirements for the repair and replacement of nonconforming containment pressure boundary components by welding or metal removal. Discussion topics include base and welding materials, welding procedure and performance qualifications, inspection techniques, testing methods, acceptance criteria, and documentation requirements necessary for making acceptable repairs and replacements so that the plant can be returned to a safe operating condition

Preliminary analysis of the creep behaviour of nuclear fuel-waste container materials

International Nuclear Information System (INIS)

Dutton, R.; Leitch, B.W.; Crosthwaite, J.L.; Kasprick, G.R.

1996-12-01

In the Canadian Nuclear Fuel Waste Management Program, it is proposed that nuclear fuel waste be placed in a durable container and disposed of in a deep underground vault. Consideration of various disposal-container designs has identified either titanium or copper as the material suitable for constructing the container shell. As part of the R and D program to examine the structural integrity of the container, creep tests are being conducted on commercially pure titanium and oxygen-free copper. This report presents the preliminary data obtained. It also describes the evaluation of various constitutive equations to represent the creep curves, thus providing the basis for extrapolation of the creep behaviour over the design lifetime of the container. In this regard, a specific focus is placed on equations derived from the 0-Projection Concept. Recognizing that the container lifetime will be determined by the onset of tertiary creep leading to creep rupture, we present the results of the metallographic examination of creep damage. This shows that the tertiary stage in titanium is associated with the formation of transgranular cavities within the region of localized necking of the creep specimens. In contrast, creep damage in copper is in the form of intergranular cavities uniformly distributed throughout the gauge length. These results are analyzed within the context of the extant literature, and their implications for future container design are discussed. (author)

Behavior of a New Elastomeric material used as polyolefinic geo membrane in waterproofing; Comportamiento de un nuevo material elastomerico utilizado como geomembrana poliolefinica en impermeabilizacion

Energy Technology Data Exchange (ETDEWEB)

Blanco, M.; Aguilar, E.; Vara, T. A; Soriano, J.; Garcia, F.; Castillo, F.

2011-07-01

Two decades ago that Balsas de Tenerife (BALTEN) and the Centro de Estudios y Experimentacion de Obras Publicas (CEDEX), in its experimental field of the south of the Tenerife Island have installed a series of materials to known their behaviour over time. These products among which was placed over a dozen years ago, on an elastomeric polyolefin. This work presents the performance of this synthetic geo membrane, focusing on the evolution in the time of the tensile properties static puncture, low temperature folding, dynamic impact, joint strength (shear and peeling test), optical microscopy of reflection nd scanning electron microscopy. (Author) 11 refs.

Successful Bullying Prevention Programs: Influence of Research Design, Implementation Features, and Program Components

Directory of Open Access Journals (Sweden)

Bryanna Hahn Fox

2012-12-01

Full Text Available Bullying prevention programs have been shown to be generally effective in reducing bullying and victimization. However, the effects are relatively small in randomized experiments and greater in quasi-experimental and age-cohort designs. Programs that are more intensive and of longer duration (for both children and teachers are more effective, as are programs containing more components. Several program components are associated with large effect sizes, including parent training or meetings and teacher training. These results should inform the design and evaluation of anti-bullying programs in the future, and a system ofaccreditation of effective programs.

Tank Focus Area Pretreatment Program. FY 1995 Program Management Plan

International Nuclear Information System (INIS)

Morrison, M.I.; McGinnis, C.P.; Wilkenson, W.T.; Hunt, R.D.

1995-02-01

This program management plan (PMP) describes the FY 1995 project plans for the Pretreatment Program of the Tank Focus Area. The Tank Focus Area is one of five areas of environmental concerns originally identified by the Deputy Assistant Secretary for Technology Development (EM-50). Projects in the Tank Focus Area relate to the remediation of liquid waste stored in underground storage tanks at various US Department of Energy sites. The Pretreatment Program is an organizational unit performing work within the Tank Focus Area. The function of the Pretreatment Program is to develop, test, evaluate, and demonstrate new technologies, with emphasis on separations. The 11 Pretreatment Program projects for FY 1995 are (1) Cesium Extraction Testing, (2) Comprehensive Supernate Treatment, (3) Hot Cell Studies, (4) Cesium Removal Demonstration, (5) Out-of-Tank Evaporator Demonstration, (6) Crossflow Filtration, (7) Technical Interchange with CEA, (8) TRUEX Applications, (9) NAC/NAG Process Studies (conducted at Oak Ridge National Laboratory), (10) NAC/NAG Process and Waste Form Studies (conducted at Florida International University), and (11) Program Management. Section 2 of this PMP contains a separate subsection for each FY 1995 project. A brief description of the project, a schedule of major milestones, and a breakdown of costs are provided for each project. The PMP also contains sections that describe the project controls that are in place. Quality assurance, document control, the project management system, and the management organization are described in these sections

Mark II containment program load evaluation and acceptance criteria; Generic Technical Activity A-8

International Nuclear Information System (INIS)

Anderson, C.J.

1981-08-01

The report provides a discussion of LOCA-related suppression pool hydrodynamic loads in boiling water reactor (BWR) facilities with the Mark II pressure-suppression containment design. This report concludes NRC Generic Technical Activity A-8, 'Mark II Containment Pool Dynamic Loads,' which has been designated an 'Unresolved Safety Issue' pursuant to Section 210 of the Energy Reorganization Act of 1974

Nondestructive Examination Of Plutonium-Bearing Material Containers

International Nuclear Information System (INIS)

Yerger, L.; Mcclard, J.; Traver, L.; Grim, T.

2010-01-01

The first nondestructive examination (NDE) of 3013-type containers as part of the Department of Energy's (DOE's) Integrated Surveillance Program (ISP) was performed in February, 2005. Since that date 280 NDE surveillances on 255 containers have been conducted. These containers were packaged with plutonium-bearing materials at multiple DOE sites. The NDE surveillances were conducted at Hanford, Lawrence Livermore National Laboratory (LLNL), and Savannah River Site (SRS). These NDEs consisted of visual inspection, mass verification, radiological surveys, prompt gamma analysis, and radiography. The primary purpose of performing NDE surveillances is to determine if there has been a significant pressure buildup inside the inner 3013 container. This is done by measuring the lid deflection of the inner 3013 container using radiography images. These lid deflection measurements are converted to pressure measurements to determine if a container has a pressure of a 100 psig or greater. Making this determination is required by Surveillance and Monitoring Plan (S and MP). All 3013 containers are designed to withstand at least 699 psig as specified by DOE-STD-3013. To date, all containers evaluated have pressures under 50 psig. In addition, the radiography is useful in evaluating the contents of the 3013 container as well as determining the condition of the walls of the inner 3013 container and the convenience containers. The radiography has shown no signs of degradation of any container, but has revealed two packaging anomalies. Quantitative pressure measurements based on lid deflections, which give more information than the 'less than or greater than 100 psig' (pass/fail) data are also available for many containers. Statistical analyses of the pass/fail data combined with analysis of the quantitative data show that it is extremely unlikely that any container in the population of 3013 containers considered in this study (e.g., containers packaged according to the DOE-STD-3013

Programmed cell death

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-12-31

The purpose of this conference to provide a multidisciplinary forum for exchange of state-of-the-art information on the role programmed cell death plays in normal development and homeostasis of many organisms. This volume contains abstracts of papers in the following areas: invertebrate development; immunology/neurology; bcl-2 family; biochemistry; programmed cell death in viruses; oncogenesis; vertebrate development; and diseases.

Reliability-based inspection of prestressed concrete containment structures

International Nuclear Information System (INIS)

Pandey, M.D.

1996-03-01

A study was undertaken to develop a reliability-based approach to the planning of inspection programs for prestressed concrete containment structures. The main function of the prestressing system is to ensure the leak integrity of the containment by maintaining a compressive state of stress under the tensile forces which arise in a hypothesized loss of coolant accident. Prestressing force losses (due to creep and shrinkage, stress relaxation or tendon corrosion) can lead to tensile stresses under accident pressure, resulting in loss of containment leak integrity due to concrete cracking and tensile yielding of the non-prestressed reinforcement. Therefore, the evaluation of prestressing inspection programs was based on their effectiveness in maintaining an acceptable reliability level with respect to a limit state representing yeilding of non-prestressed reinforcement. An annual target reliability of 10 -4 was used for this limit state. As specified in CSA-N287.7, the evaluation of prestressing systems for containment structures is based on the results of lift-off tests to determine the prestressing force. For unbonded systems the tests are carried out on a randomly selected sample from each tendon group in the structure. For bonded systems, the test is carried out on an unbonded test beam that matches the section geometry and material properties of the containment structure. It was found that flexural testing is useful in updating the probability of concrete cracking under accident pressure. For unbonded systems, the analysis indicated that the sample size recommended by the CSA Standard (4% of the tendon population) is adequate. The CSA recommendation for a five year inspection interval is conservative unless severe degradation of the prestressing system, characterized by a high prestressing loss rate (>3%) and a large coefficient of variation of the measured prestressing force (>15%), is observed

Modeling of combustion products composition of hydrogen-containing fuels

International Nuclear Information System (INIS)

Assad, M.S.

2010-01-01

Due to the usage of entropy maximum principal the algorithm and the program of chemical equilibrium calculation concerning hydrogen--containing fuels are devised. The program enables to estimate the composition of combustion products generated in the conditions similar to combustion conditions in heat engines. The program also enables to reveal the way hydrogen fraction in the conditional composition of the hydrocarbon-hydrogen-air mixture influences the harmful components content. It is proven that molecular hydrogen in the mixture is conductive to the decrease of CO, CO 2 and CH x concentration. NO outlet increases due to higher combustion temperature and N, O, OH concentrations in burnt gases. (authors)

Waste container and method for containing waste

International Nuclear Information System (INIS)

Ono, Akira; Matsushita, Mitsuhiro; Doi, Makoto; Nakatani, Seiichi.

1990-01-01

In a waste container, water-proof membranes and rare earth element layers are formed on the inner surface of a steel plate concrete container in which steel plates are embedded. Further, rear earth element detectors are disposed each from the inner side of the steel plate concrete container by way of a pressure pipe to the outer side of the container. As a method for actually containing wastes, when a plurality of vessels in which wastes are fixed are collectively enhoused to the waste container, cussioning materials are attached to the inner surface of the container and wastes fixing containers are stacked successively in a plurality of rows in a bag made of elastic materials. Subsequently, fixing materials are filled and tightly sealed in the waste container. When the waste container thus constituted is buried underground, even if it should be deformed to cause intrusion of rain water to the inside of the container, the rare earth elements in the container dissolved in the rain water can be detected by the detectors, the containers are exchanged before the rain water intruding to the inner side is leached to the surrounding ground, to previously prevent the leakage of radioactive nuclides. (K.M.)

Maintaining leak tightness capability of Caorso BWR containment

International Nuclear Information System (INIS)

Barsanti, P.; Di Palo, L.; Grimaldi, G.

1988-01-01

In 1987 the local leak rate test (LLRT) results of the primary containment were revised, with the following main goals: to highlight recurring problems, leading to lack of leak tightness of the primary containment; to individuate the pertinent degradation mechanisms; to assess the corrective actions already implemented and to plan further improvements, if necessary; and to optimize the preventive maintenance program on the containment, particularly the inspection frequency. All LLRTs in the past operating period, both before (as found) and after (as left) maintenance were analyzed, in terms of leakage rate and equivalent area of leak, for each penetration. Corrective actions already implemented included replacement of some valves with better quality type one, passivation of the carbon steel pipes and improvement of the pertinent surveillance procedures. Long term corrective actions, now under consideration, will include the following: more extensive passivation of pipes, carrying humid air, so that oxidation could be drastically reduced; better chemistry control in fluid systems; extensive replacement of the butterfly valves presently used; implementation of the LLRT practice, such to quantitatively measure the leakage rate, also in presence of large leak; and reduction of the time interval between periodical tests, on the basis of the results of the previous ones. Following these guidelines, future overall leakage tests would be performed in as found condition, aimed to verify the effectiveness of the entire maintenance and testing program of the primary containment and of its capability to maintain leak tightness during the time between two subsequent tests

Application and study of advanced network technology in large container inspection system

International Nuclear Information System (INIS)

Li Zheng; Kang Kejun; Gao Wenhuan; Wang Jingjin

1996-01-01

Large Container Inspection System (LCIS) based on radiation imaging technology is a powerful tool for the customs to check the contents inside a large container without opening it. An image distributed network system is composed of center manager station, image acquisition station, environment control station, inspection processing station, check-in station, check-out station, database station by using advanced network technology. Mass data, such as container image data, container general information, manifest scanning data, commands and status, must be on-line transferred between different stations. Advanced network technology and software programming technique are presented

Worst-case prediction of normal operating containment temperatures for environmentally qualified equipment

International Nuclear Information System (INIS)

Krasnopoler, M.J.; Sundergill, J.E.

1991-01-01

Due to issues raised in NRC Information Notice No. 87-65, a southern US nuclear plant was concerned about thermal aging of environmentally qualified (EQ) equipment located in areas of elevated containment temperatures. A method to predict the worst-case monthly temperatures at various zones in the containment and calculate the qualified life using this monthly temperature was developed. Temperatures were predicted for twenty locations inside the containment. Concern about the qualified life of EQ equipment resulted from normal operating temperatures above 120F in several areas of the containment, especially during the summer. At a few locations, the temperature exceeded 140F. Also, NRC Information Notice No. 89-30 reported high containment temperatures at three other nuclear power plants. The predicted temperatures were based on a one-year containment temperature monitoring program. The monitors included permanent temperature monitors required by the Technical Specifications and temporary monitors installed specifically for this program. The temporary monitors were installed near EQ equipment in the expected worst-case areas based on design and operating experience. A semi-empirical model that combined physical and statistical models was developed. The physical model was an overall energy balance for the containment. The statistical model consists of several linear regressions that conservatively relate the monitor temperatures to the bulk containment temperature. The resulting semi-empirical model predicts the worst-case monthly service temperatures at the location of each of the containment temperature monitors. The monthly temperatures are the maximum expected because they are based on the historically worst-case atmospheric data

Evaluation of containment failure modes and fission product releases during core meltdown accidents in a BWR with a Mark III containment

International Nuclear Information System (INIS)

Ludewig, H.; Yu, W.S.; Jaung, R.; Pratt, W.T.

1985-01-01

An assessment is described of potential failure modes and fission product releases for a large number of postulated core meltdown accidents in a BWR with a Mark III containment. For this containment design, the most important failure mode was found to be due to hydrogen related phenomena. A one-dimensional lumped parameter computer code has been developed and used to determine the probability of various hydrogen phenomena for a range of postulated core meltdown sequences. Potential containment loads have been estimated and compared against the containment capacity to determine the probability of containment failure. The fission product release assessment began by using the MARCH/CORRAL system of codes with key input parameters varied over a reasonable range. The parameters relate to primary system retention, re-emission, pool scrubbing, and fission product release in-vessel vs ex-vessel. The final step used more mechanistic calculations based on the system of codes recently developed under sponsorship of the Accident Source Term Program Office, NRC, and compares these predictions with the range of releases calculated in the sensitivity study

Eddy Current Assessment of Engineered Components Containing Nanofibers

Science.gov (United States)

Ko, Ray T.; Hoppe, Wally; Pierce, Jenny

2009-03-01

The eddy current approach has been used to assess engineered components containing nanofibers. Five specimens with different programmed defects were fabricated. A 4-point collinear probe was used to verify the electrical resistivity of each specimen. The liftoff component of the eddy current signal was used to test two extreme cases with different nano contents. Additional eddy current measurements were also used in detecting a missing nano layer simulating a manufacturing process error. The results of this assessment suggest that eddy current liftoff measurement can be a useful tool in evaluating the electrical properties of materials containing nanofibers.

Dykes and structures of the NE rift of Tenerife, Canary Islands: a record of stabilisation and destabilisation of ocean island rift zones

Science.gov (United States)

Delcamp, A.; Troll, V. R.; van Wyk de Vries, B.; Carracedo, J. C.; Petronis, M. S.; Pérez-Torrado, F. J.; Deegan, F. M.

2012-07-01

Many oceanic island rift zones are associated with lateral sector collapses, and several models have been proposed to explain this link. The North-East Rift Zone (NERZ) of Tenerife Island, Spain offers an opportunity to explore this relationship, as three successive collapses are located on both sides of the rift. We have carried out a systematic and detailed mapping campaign on the rift zone, including analysis of about 400 dykes. We recorded dyke morphology, thickness, composition, internal textural features and orientation to provide a catalogue of the characteristics of rift zone dykes. Dykes were intruded along the rift, but also radiate from several nodes along the rift and form en échelon sets along the walls of collapse scars. A striking characteristic of the dykes along the collapse scars is that they dip away from rift or embayment axes and are oblique to the collapse walls. This dyke pattern is consistent with the lateral spreading of the sectors long before the collapse events. The slump sides would create the necessary strike-slip movement to promote en échelon dyke patterns. The spreading flank would probably involve a basal decollement. Lateral flank spreading could have been generated by the intense intrusive activity along the rift but sectorial spreading in turn focused intrusive activity and allowed the development of deep intra-volcanic intrusive complexes. With continued magma supply, spreading caused temporary stabilisation of the rift by reducing slopes and relaxing stress. However, as magmatic intrusion persisted, a critical point was reached, beyond which further intrusion led to large-scale flank failure and sector collapse. During the early stages of growth, the rift could have been influenced by regional stress/strain fields and by pre-existing oceanic structures, but its later and mature development probably depended largely on the local volcanic and magmatic stress/strain fields that are effectively controlled by the rift zone growth

Proceedings Workshop on Generic Programming (WGP2000)

NARCIS (Netherlands)

Jeuring, J.T.

2000-01-01

This report contains the papers selected for presentation at the 2nd Workshop on Generic Programming (WGP2000), which was held on July 6, 2000 in Ponte de Lima, Portugal. Generic programming is about making programs more adaptable by making them more general. Generic programs often embody

Special closures for steel drum shipping containers

International Nuclear Information System (INIS)

Bonzon, L.L.; Otts, J.V.

1976-01-01

The objective of this program was to develop special lid closures for typical, steel drum, radioactive material shipping containers. Previous experience and testing had shown that the existing container was adequate to withstand the required environmental tests for certification, but that the lid and closure were just marginally effective. Specifically, the lid closure failed to consistently maintain a tight seal between the container and the lid after drop tests, thus causing the package contents to be vulnerable in the subsequent fire test. Recognizing the deficiency, the United States Energy Research and Development Administration requested the development of new closure(s) which would: (1) be as strong and resistant to a drop as the bottom of the container; (2) have minimal economic impact on the overall container cost; (3) maximize the use of existing container designs; (4) consider crush loads; and (5) result in less dependence on personnel and loading procedures. Several techniques were evaluated and found to be more effective than the standard closure mechanism. Of these, three new closure techniques were designed, fabricated, and proven to be structurally adequate to provide containment when a 454-kg drum was drop tested from 9.14-m onto an unyielding surface. The three designs were: (1) a 152-mm long lid extension or skirt welded to the standard drum lid, (2) a separate inner lid, with 152-mm long skirt and (3) C-clamps used at the container-lid interface. Based upon structural integrity, economic impact, and minimal design change, the lid extension is the recommended special closure

Regulated programmed lysis of recombinant Salmonella in host tissues to release protective antigens and confer biological containment.

Science.gov (United States)

Kong, Wei; Wanda, Soo-Young; Zhang, Xin; Bollen, Wendy; Tinge, Steven A; Roland, Kenneth L; Curtiss, Roy

2008-07-08

We have devised and constructed a biological containment system designed to cause programmed bacterial cell lysis with no survivors. We have validated this system, using Salmonella enterica serovar Typhimurium vaccines for antigen delivery after colonization of host lymphoid tissues. The system is composed of two parts. The first component is Salmonella typhimurium strain chi8937, with deletions of asdA and arabinose-regulated expression of murA, two genes required for peptidoglycan synthesis and additional mutations to enhance complete lysis and antigen delivery. The second component is plasmid pYA3681, which encodes arabinose-regulated murA and asdA expression and C2-regulated synthesis of antisense asdA and murA mRNA transcribed from the P22 P(R) promoter. An arabinose-regulated c2 gene is present in the chromosome. chi8937(pYA3681) exhibits arabinose-dependent growth. Upon invasion of host tissues, an arabinose-free environment, transcription of asdA, murA, and c2 ceases, and concentrations of their gene products decrease because of cell division. The drop in C2 concentration results in activation of P(R), driving synthesis of antisense mRNA to block translation of any residual asdA and murA mRNA. A highly antigenic alpha-helical domain of Streptococcus pneumoniae Rx1 PspA was cloned into pYA3681, resulting in pYA3685 to test antigen delivery. Mice orally immunized with chi8937(pYA3685) developed antibody responses to PspA and Salmonella outer membrane proteins. No viable vaccine strain cells were detected in host tissues after 21 days. This system has potential applications with other Gram-negative bacteria in which biological containment would be desirable.

Behaviour of concrete containment under over-pressure conditions

International Nuclear Information System (INIS)

Atchison, R.J.; Asmis, G.J.K.; Campbell, F.R.

1979-01-01

The Atomic Energy Control Board of Canada initiated June, 1975, a major study of the behaviour of concrete containment under over-pressure conditions. Although extensive theoretical and experimental work has been carried out for thick-walled Prestressed Concrete Reactor Vessels (PCRV's), there is a want of information on the non-linear response of thin-walled structures typical of the CANDU, 600 MW(e) cylindrical/spherical, post-tensioned containment shells. The purpose of this paper is to provide an overview of the total program, to present the reasons behind the research contract, and the specification and implementation of the work. The results of the theoretical and experimental work and their implications with respect to Canadian Concrete Containment practice are discussed. This study is unique, and, as far as is known, has no world-wide precedence. (orig.)

Programming with Intervals

Science.gov (United States)

Matsakis, Nicholas D.; Gross, Thomas R.

Intervals are a new, higher-level primitive for parallel programming with which programmers directly construct the program schedule. Programs using intervals can be statically analyzed to ensure that they do not deadlock or contain data races. In this paper, we demonstrate the flexibility of intervals by showing how to use them to emulate common parallel control-flow constructs like barriers and signals, as well as higher-level patterns such as bounded-buffer producer-consumer. We have implemented intervals as a publicly available library for Java and Scala.

Mississippi Curriculum Framework for Drafting and Design Technology (Program CIP: 48.0102--Architectural Drafting Technology) (Program CIP: 48.0101--General Drafting). Postsecondary Programs.

Science.gov (United States)

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the two course sequences of the state's postsecondary-level drafting and design technology program: architectural drafting technology and drafting and design technology. Presented first are a program description and…

BEACON/MOD: a computer program for thermal-hydraulic analysis of nuclear reactor containments - user's manual

International Nuclear Information System (INIS)

Broadus, C.R.; Doyle, R.J.; James, S.W.; Lime, J.F.; Mings, W.J.

1980-04-01

The BEACON code is a best-estimate, advanced containment code designed to perform a best-estimate analysis of the flow of a mixture of air, water, and steam in a nuclear reactor containment system under loss-of-coolant accident conditions. The code can simulate two-component, two-phase fluid flow in complex geometries using a combination of two-dimensional, one-dimensional, and lumped-parameter representations for the various parts of the system. The current version of BEACON, which is designated BEACON/MOD3, contains mass and heat transfer models for wall film and wall conduction. It is suitable for the evaluation of short-term transients in dry-containment systems. This manual describes the models employed in BEACON/MOD3 and specifies code implementation requirements. It provides application information for input data preparation and for output data interpretation

Basic Gasoline Engine Mechanics. Florida Vocational Program Guide.

Science.gov (United States)

University of South Florida, Tampa. Dept. of Adult and Vocational Education.

This packet contains a program guide and Career Merit Achievement Plan (Career MAP) for the implementation of a basic gasoline engine mechanics program in Florida secondary and postsecondary schools. The program guide describes the program content and structure, provides a program description, lists job titles under the program, and includes a…

Elements of thought on corium containment strategy in reactor vessel

International Nuclear Information System (INIS)

2015-01-01

As accidents with core fusion are taken into account for the design of third-generation nuclear reactors, this brief document presents the corium containment strategy for a reactor vessel, its limitations, as well as research programs undertaken by the IRSN in this field. The report describes the controlled management of a severe accident, the major objective being to minimise releases in the environment, that which requires to maintain the reactor containment enclosure tightness. Practical actions are briefly indicated. Key points indicating the feasibility of a strategy of containment in vessel are discussed. The impact of reactor power on the robustness of an approach with containment in vessel is also discussed. An overview of technological evolutions and contributions of researches made by the IRSN is finally proposed

Civil Engineering Technology Program Guide.

Science.gov (United States)

Georgia Univ., Athens. Dept. of Vocational Education.

This program guide presents civil engineering technology curriculum for technical institutes in Georgia. The general information section contains the following: purpose and objectives; program description, including admissions, typical job titles, and accreditation and certification; and curriculum model, including standard curriculum sequence and…

Commercial Foods and Culinary Arts. Florida Vocational Program Guide.

Science.gov (United States)

University of South Florida, Tampa. Dept. of Adult and Vocational Education.

This guide identifies considerations in the organization, operation, and evaluation of secondary and postsecondary vocational education programs. It contains both a vocational program guide and Career Merit Achievement Plan (Career MAP) for commercial foods and culinary arts. The guide contains the following sections: occupational description;…

National Waste Terminal Storage Program: management and technical program plan, FY 1976--FY 1978

International Nuclear Information System (INIS)

1976-01-01

The discussion on the management plan covers the program, responsibilities, general program schedule and logic, Office of Waste Isolation organization and facilities, management approach, administrative plan, and public affairs plan. The technical program plan includes geological studies, technical support studies, engineering studies, waste facility projects, environmental studies, system studies, data management, and international activities. The information contained in this report is obsolete and of historical interest only

Halon 1301 protection system for nuclear containments

International Nuclear Information System (INIS)

McHale, E.T.

1981-01-01

Halon 1301 can provide protection against any combustion hazard that hydrogen gas might present in an LWR containment following a loss-of-coolant accident. A development program was conducted, comprising analytical study, laboratory experiments and large-scale testing, to define the requirements for a Halon 1301 system and to examine certain operational problems that were hypothesized. Some results of the study are presented in this paper

Calculation of the form of an equilibrium poloidal magnetic field contained in a polytropic star

International Nuclear Information System (INIS)

Brundrit, G.B.; Miketinac, M.J.

1976-01-01

This program is designed to integrate the exact equations which determine the distribution of the density of a self-gravitating, axisymmetric polytrope of infinite conductivity containing a poloidal magnetic field. In addition, other properties of an equilibrium configuration such as mass, volume and radius are calculated. The program can also provide at very small extra cost the rates of change of the density with respect to changes of the polytropic index n and the parameter lambda which characterizes the poloidal magnetic field. Mathematically, the problem can be formulated as a boundary value problem for three coupled equations, two of which are second order, non-linear, two-dimensional partial differential equations. The solution is obtained numerically by an adaptation of the Stoeckl's finite difference-finite expansion method. In fact, the present program is a major modification of the program TOROID. The numerical scheme developed in the program is valid for all polytropes whose polytropic index n is greater than or equal to one. The other parameter of the theory, lambda, is unrestricted, i.e. the program permits the study of stars whose matnetic energy is a 'sizeable' percentage of their gravitational energy. Also, the program, with minor modifications, could be used for calculating equilibrium configurations of (a) (uniformly or non-uniformly) rotating polytropes pervaded by poloidal magnetic fields or (b) (rotation) polytropes containing poloidal magnetic fields. However, the greatest use of the present program is expected to arise in attempts to construct equilibrium configurations of polytropes containing mixed poloidal toroidal magnetic fields. (Auth.)

Secondary Containers and Service Containers for Pesticides

Science.gov (United States)

Secondary containers and service containers are used by pesticide applicators in the process of applying a pesticide. EPA does not require secondary containers or service containers to be labeled or to meet particular construction standards. Learn more.

Aging management and life extension - Containment aging study

International Nuclear Information System (INIS)

Tai, Tom M.; Deng, Daniel

2004-01-01

Bechtel is currently completing an aging study on a concrete containment structure. The target plant is a two-unit PWR plant with a generating capacity of about 850 MWe from each unit. Both units are less than 20 years old. The total electrical energy output from this plant site accounts for more than 50% of the utility's baseload operation. Although no utility in the United States has made a decision to submit a license renewal application, some have begun to investigate the feasibility of developing an life cycle management (LCM) program for a strategy to operate their plants efficiently, to investigate the financial benefit and safety implications of license renewal to operate their nuclear power plants beyond their current licensed periods, and to prepare a program plan for plant decommissioning. The LCM program includes economic, environmental, regulatory and technical aspects of continuing plant operations beyond the current license period. The Electric Power Research Institute (EPRI) has been supportive to assist utilities and owners groups in their research and development efforts to develop the technical requirements and the issues associated with important to license renewal structures. The focus of this paper is on the technical issues related to the evaluation of the material condition of the containment structure with respect to aging and the effective management of that aging. (author)

MCR Container Tools

Energy Technology Data Exchange (ETDEWEB)

2018-01-01

MathWorks' MATLAB is widely used in academia and industry for prototyping, data analysis, data processing, etc. Many users compile their programs using the MATLAB Compiler to run on workstations/computing clusters via the free MATLAB Compiler Runtime (MCR). The MCR facilitates the execution of code calling Application Programming Interfaces (API) functions from both base MATLAB and MATLAB toolboxes. In a Linux environment, a sizable number of third-party runtime dependencies (i.e. shared libraries) are necessary. Unfortunately, to the MTLAB community's knowledge, these dependencies are not documented, leaving system administrators and/or end-users to find/install the necessary libraries either as runtime errors resulting from them missing or by inspecting the header information of Executable and Linkable Format (ELF) libraries of the MCR to determine which ones are missing from the system. To address various shortcomings, Docker Images based on Community Enterprise Operating System (CentOS) 7, a derivative of Redhat Enterprise Linux (RHEL) 7, containing recent (2015-2017) MCR releases and their dependencies were created. These images, along with a provided sample Docker Compose YAML Script, can be used to create a simulated computing cluster where MATLAB Compiler created binaries can be executed using a sample Slurm Workload Manager script.

Computer aided probabilistic assessment of containment integrity

International Nuclear Information System (INIS)

Tsai, J.C.; Touchton, R.A.

1984-01-01

In the probabilistic risk assessment (PRA) of a nuclear power plant, there are three probability-based techniques which are widely used for event sequence frequency quantification (including nodal probability estimation). These three techniques are the event tree analysis, the fault tree analysis and the Bayesian approach for database development. In the barrier analysis for assessing radionuclide release to the environment in a PRA study, these techniques are employed to a greater extent in estimating conditions which could lead to failure of the fuel cladding and the reactor coolant system (RCS) pressure boundary, but to a lesser degree in the containment pressure boundary failure analysis. The main reason is that containment issues are currently still in a state of flux. In this paper, the authors describe briefly the computer programs currently used by the nuclear industry to do event tree analyses, fault tree analyses and the Bayesian update. The authors discuss how these computer aided probabilistic techniques might be adopted for failure analysis of the containment pressure boundary

Energy research program 80

International Nuclear Information System (INIS)

1980-01-01

The energy research program 80 contains an extension of the activities for the period 1980-82 within a budget of 100 mio.kr., that are a part of the goverment's employment plan for 1980. The research program is based on a number of project proposals, that have been collected, analysed, and supplemented in October-November 1979. This report consists of two parts. Part 1: a survey of the program, with a brief description of the background, principles, organization and financing. Part 2: Detailed description of the different research programs. (LN)

Fast Evaluation of the Reliability of Container Securing Arrangements

DEFF Research Database (Denmark)

Mansour, A.E.; Jensen, Jørgen Juncher; Olsen, Anders Smærup

2004-01-01

of container failures are considered including racking and corner post failure. The associated probability of failure is determined using a FORM approach. The procedure can easily be programmed in a simple spreadsheet and the calculation time is very short due to the use of analytical transfer functions...

AP600 containment purge radiological analysis

Energy Technology Data Exchange (ETDEWEB)

O`Connor, M.; Schulz, J.; Tan, C. [Bechtel Power Corporation (United States)] [and others

1995-02-01

The AP600 Project is a passive pressurized water reactor power plant which is part of the Design Certification and First-of-a-Kind Engineering effort under the Advanced Light Water Reactor program. Included in this process is the design of the containment air filtration system which will be the subject of this paper. We will compare the practice used by previous plants with the AP600 approach to meet the goals of industry standards in sizing the containment air filtration system. The radiological aspects of design are of primary significance and will be the focus of this paper. The AP600 Project optimized the design to combine the functions of the high volumetric flow rate, low volumetric flow rate, and containment cleanup and other filtration systems into one multi-functional system. This achieves a more simplified, standardized, and lower cost design. Studies were performed to determine the possible concentrations of radioactive material in the containment atmosphere and the effectiveness of the purge system to keep concentrations within 10CFR20 limits and within offsite dose objectives. The concentrations were determined for various reactor coolant system leakage rates and containment purge modes of operation. The resultant concentrations were used to determine the containment accessibility during various stages of normal plant operation including refueling. The results of the parametric studies indicate that a dual train purge system with a capacity of 4,000 cfm per train is more than adequate to control the airborne radioactivity levels inside containment during normal plant operation and refueling, and satisfies the goals of ANSI/ANS-56.6-1986 and limits the amount of radioactive material released to the environment per ANSI/ANS 59.2-1985 to provide a safe environment for plant personnel and offsite residents.

Post-tensioning system surveillance program

International Nuclear Information System (INIS)

Drew, G.E.

1979-01-01

Nuclear power plant containment structure post-tensioning system tendon surveillance program is described in detail. Data collected over three yearly post-tensioning system Surveillance Programs is presented and evaluated to correlate anticipated stress losses with actual losses. In addition corrosion protected system performance is analyzed

Program Analysis as Model Checking

DEFF Research Database (Denmark)

Olesen, Mads Chr.

Software programs are proliferating throughout modern life, to a point where even the simplest appliances such as lightbulbs contain software, in addition to the software embedded in cars and airplanes. The correct functioning of these programs is therefore of the utmost importance, for the quality...

Joint slot allocation and dynamic pricing of container sea–rail multimodal transportation

Directory of Open Access Journals (Sweden)

Di Liu

2015-06-01

Full Text Available The container sea–rail multimodal transport system faces complex challenges with demand uncertainties for joint slot allocation and dynamic pricing. The challenge is formulated as a two-stage optimal model based on revenue management (RM as actual slots sale of multi-node container sea–rail multimodal transport usually includes contract sale to large shippers and free sale to scattered shippers. First stage in the model utilizes an origin-destination control approach, formulated as a stochastic integer programming equation, to settle long-term slot allocation in the contract market and empty container allocation. Second stage in the model is formulated as a stochastic nonlinear programming equation to solve a multiproduct joint dynamic pricing and inventory control problem for price settling and slot allocation in each period of free market. Considering the random nature of demand, the methods of chance constrained programming and robust optimization are utilized to transform stochastic models into deterministic models. A numerical experiment is presented to verify the availability of models and solving methods. Results of considering uncertain/certain demand are compared, which show that the two-stage optimal strategy integrating slot allocation with dynamic pricing considering random demand is revealed to increase the revenue for multimodal transport operators (MTO while concurrently satisfying shippers' demand. Research resulting from this paper will contribute to the theory and practice of container sea–rail multimodal transport revenue management and provide a scientific decision-making tool for MTO.

Mississippi Curriculum Framework for Welding (Program CIP: 48.0508--Welder/Welding Technologist). Secondary Programs.

Science.gov (United States)

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which reflects Mississippi's statutory requirement that instructional programs be based on core curricula and performance-based assessment, contains outlines of the instructional units required in local instructional management plans and daily lesson plans for welding I and II. Presented first are a program description and course…

Surveillance of sealed containers with plutonium oxide materials (ms163)

Science.gov (United States)

Worl, Laura; Berg, John; Ford, Doris; Martinez, Max; McFarlan, Jim; Morris, John; Padilla, Dennis; Rau, Karen; Smith, Coleman; Veirs, Kirk; Hill, Dallas; Prenger, Coyne

2000-07-01

DOE is embarking upon a program to store large quantities of plutonium-bearing materials for up to fifty years. Materials destined for long-term storage include metals and oxides that are stabilized and packaged according to the DOE storage standard, where the packaging consists of two nested, welded, stainless steel containers. We have designed instrumented storage containers that mimic the inner storage can specified in the 3013 standard at both full- and small-scale capacities (2.4 liter and 0.005 liter, respectively), Figures 1 and 2. The containers are designed to maintain the volume to material mass ratio while allowing the gas composition and pressure to be monitored over time.

Mass extraction container closure integrity physical testing method development for parenteral container closure systems.

Science.gov (United States)

Yoon, Seung-Yil; Sagi, Hemi; Goldhammer, Craig; Li, Lei

2012-01-01

Container closure integrity (CCI) is a critical factor to ensure that product sterility is maintained over its entire shelf life. Assuring the CCI during container closure (C/C) system qualification, routine manufacturing and stability is important. FDA guidance also encourages industry to develop a CCI physical testing method in lieu of sterility testing in a stability program. A mass extraction system has been developed to check CCI for a variety of container closure systems such as vials, syringes, and cartridges. Various types of defects (e.g., glass micropipette, laser drill, wire) were created and used to demonstrate a detection limit. Leakage, detected as mass flow in this study, changes as a function of defect length and diameter. Therefore, the morphology of defects has been examined in detail with fluid theories. This study demonstrated that a mass extraction system was able to distinguish between intact samples and samples with 2 μm defects reliably when the defect was exposed to air, water, placebo, or drug product (3 mg/mL concentration) solution. Also, it has been verified that the method was robust, and capable of determining the acceptance limit using 3σ for syringes and 6σ for vials. Sterile products must maintain their sterility over their entire shelf life. Container closure systems such as those found in syringes and vials provide a seal between rubber and glass containers. This seal must be ensured to maintain product sterility. A mass extraction system has been developed to check container closure integrity for a variety of container closure systems such as vials, syringes, and cartridges. In order to demonstrate the method's capability, various types of defects (e.g., glass micropipette, laser drill, wire) were created in syringes and vials and were tested. This study demonstrated that a mass extraction system was able to distinguish between intact samples and samples with 2 μm defects reliably when the defect was exposed to air, water

Evolution of elevated containment temperatures at Calvert Cliffs Nuclear Power Plant

International Nuclear Information System (INIS)

Branch, R.D. Jr.

1991-01-01

In this paper the author describes the events which caused Calvert Cliffs Nuclear Power Plant engineers to recognize a need for monitoring of ambient temperatures within containment. The early attempts at temperature monitoring programs are discussed and critiqued. Primary failings of these early programs included a failure to collect temperature data under a variety of external conditions and a lack of quality assurance to make the data useful for design change. From these early attempts Calvert Cliffs developed a new, extensive temperature monitoring program designed to collect data over a two-year period. The author outlines the planned temperature monitoring program and discusses its expected results

Surveillance and Monitoring Program Full-Scale Experiments to Evaluate the Potential for Corrosion in 3013 Containers

Energy Technology Data Exchange (ETDEWEB)

Narlesky, Joshua Edward [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Berg, John M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Duque, Juan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Harradine, David Martin [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Hill, Dallas Dwight [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kaczar, Gregory Michael [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Lillard, R. Scott [Univ. of Akron, OH (United States); Lopez, Annabelle Sarita [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Martinez, Max Alfonso [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Peppers, Larry G. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Rios, Daniel [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Romero, Edward L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Stroud, Mary Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Trujillo, Leonardo Alberto [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Veirs, Douglas Kirk [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Wilson, Kennard Virden Jr. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Worl, Laura Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-11-21

A set of six long-term, full-scale experiments were initiated to determine the type and extent of corrosion that occurs in 3013 containers packaged with chloride-bearing plutonium oxide materials. The materials were exposed to a high relative humidity environment representative of actual packaging conditions for the materials in storage. The materials were sealed in instrumented, inner 3013 containers with corrosion specimens designed to test the corrosiveness of the environment inside the containers under various conditions. This report focuses on initial loading conditions that are used to establish a baseline to show how the conditions change throughout the storage lifetime of the containers.

Buckling of steel containment shells. Task 1b. Buckling of Washington Public Power Supply Systems' plant No. 2 containment vessel. Final report, 25 August 1980-30 September 1982

International Nuclear Information System (INIS)

Meller, E.; Bushnell, D.

1982-12-01

Static buckling analyses of the steel containment vessel of the Washington Public Power Supply Systems' (WPPSS) plant No. 2 were conducted with use of several computer programs developed at the Lockheed Missiles and Space Company (LMSC). These analyses were conducted as part of Task 1, Evaluation of Two Steel Containment Designs. The report is divided into two main sections. The first gives results from analyses of the containment as if it were axisymmetric (computerized models with use of BOSOR4, BOSOR5, and PANDA), and the second gives results from a STAGSC-1 model in which the largest penetration is included. Good agreement is obtained from analyses with BOSOR5 and STAGSC-1 for a case in which both of these computer programs were applied to the same configuration and loading. It is important to include nonlinear material behavior (plasticity) in the computerized models for collapse. Predictions of collapse from STAGSC-1 indicate that the largest penetration of the WPPSS-2 containment vessel is reinforced such that there is no decrease in load carrying capability below that indicated from models in which this penetration is neglected

Transit Benefit Program Data -

Data.gov (United States)

Department of Transportation — This data set contains information about any US government agency participating in the transit benefits program, funding agreements, individual participating Federal...

LOFCON-LOFT condenser program

International Nuclear Information System (INIS)

Lemmon, E.C.; MacKay, D.B.

1978-01-01

LOFCON is a program developed for the LOFT air condenser system contained in the secondary coolant system. Although the basic theory described herein is general, the program given is not--it is specifically for the LOFT configuration. LOFCON is presented in subroutine form so that it may be easily incorporated into a larger program describing the complete secondary side. Specifically LOFCON was written to be incorporated into the detailed CSMP model of the LOFT secondary coolant system simulation

Containment Domains: A Scalable, Efficient and Flexible Resilience Scheme for Exascale Systems

Directory of Open Access Journals (Sweden)

Jinsuk Chung

2013-01-01

Full Text Available This paper describes and evaluates a scalable and efficient resilience scheme based on the concept of containment domains. Containment domains are a programming construct that enable applications to express resilience needs and to interact with the system to tune and specialize error detection, state preservation and restoration, and recovery schemes. Containment domains have weak transactional semantics and are nested to take advantage of the machine and application hierarchies and to enable hierarchical state preservation, restoration and recovery. We evaluate the scalability and efficiency of containment domains using generalized trace-driven simulation and analytical analysis and show that containment domains are superior to both checkpoint restart and redundant execution approaches.

Towards an autonomous system for handling inter-terminal container transport

NARCIS (Netherlands)

dr. J.H.R. van Duin; ir. F.G. Rieck; A. Spruit

2017-01-01

As part of the National Transition Board Practice Research Raak/SIA program, the INTRALOG (intelligent Truck Application in Logistics) project investigated the practical application of zero emission Automatic Guided Trucks (AGTs) for the transport of containers in the Harbour Industrial Cluster

Canarias triunfante: la plasmación de la imagen a través del mito

Directory of Open Access Journals (Sweden)

Jonás Armas Núñez

2013-01-01

Full Text Available La obtención de la capitalidad de la Provincia de Canarias por parte de Santa Cruz de Tenerife en el siglo XIX llevó implícita la necesidad de mostrar en la urbe las ideas de poder y progreso. La erección de nuevos edificios representativos y el empuje de la nueva y pujante clase social, la burguesía, crearon en Santa Cruz de Tenerife suntuosos escaparates de la imagen del poder de la capital, entre los que destaca el palacio de la Capitanía General de Canarias, y en especial su singular Salón del Trono.

Criticality safety evaluation of a type B enriched uranium shipping container

International Nuclear Information System (INIS)

Hopper, C.M.

1978-01-01

The Oak Ridge Y-12 Plant Model DT-14 container was developed to replace and extend the enriched uranium shipping capabilities of the USA/5765/BF Vermiculite shipping container. This work was accomplished to comply with the DOE Immediate Action Directive Number 0529-02 for ''Phasing out the use of loose or bagged Vermiculite packaging material as a thermal shield and shock absorber in radioactive material packages''. The Model DT-14 is fabricated from a Specification 17H 30-gallon drum, cane fiberboard insulation, and a steel inner containment vessel (159 mm dia by 390 mm height). The single-package and array analyses are based upon results of the multigroup Monte Carlo criticality program, KENO, utilizing 16-energy-group Hansen-Roach, and Knight modified 238 U cross sections. The program and cross sections are considered well established on the basis of their success in calculating a large variety of critical experiments. Validation results show that a calculated neutron multiplication factor plus two standard deviations equal to 0.970 or greater must be considered critical, and all lower values may be considered safe

Container crane for sea freight containers

NARCIS (Netherlands)

Luttekes, E.; Rijsenbrij, J.C.

2001-01-01

The invention relates to a container crane for loading and unloading seaborne containers. The container crane comprises a bridge girder (7), a jib (8), at least two crabs (11, 12) which can travel along the said bridge girder and/or jib and are provided with hoist means for lifting and lowering the

Effectiveness of containment sprays in containment management

International Nuclear Information System (INIS)

Nourbakhsh, H.P.; Perez, S.E.; Lehner, J.R.

1993-05-01

A limited study has been performed assessing the effectiveness of containment sprays-to mitigate particular challenges which may occur during a severe accident. Certain aspects of three specific topics related to using sprays under severe accident conditions were investigated. The first was the effectiveness of sprays connected to an alternate water supple and pumping source because the actual containment spray pumps are inoperable. This situation could occur during a station blackout. The second topic concerned the adverse as well as beneficial effects of using containment sprays during severe accident scenario where the containment atmosphere contains substantial quantities of hydrogen along with steam. The third topic was the feasibility of using containment sprays to moderate the consequences of DCH

APR1400 Containment Simulation with CONTAIN code

Energy Technology Data Exchange (ETDEWEB)

Hwang, Moon Kyu; Chung, Bub Dong [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2010-05-15

The more realistic containment pressure variation predicted by the CONTAIN code through the coupled analysis during a large break loss of coolant accident in the nuclear power plant is expected to provide more accurate prediction for the plant behavior than a standalone MARS-KS calculation. The input deck has been generated based on the already available ARP- 1400 input for CONTEMPT code. Similarly to the CONTEMPT input deck, a simple two-cell model was adopted to model the containment behavior, one cell for the containment inner volume and another cell for the environment condition. The developed input for the CONTAIN code is to be eventually applied for the coupled code calculation of MARS-KS/CONTAIN

APR1400 Containment Simulation with CONTAIN code

International Nuclear Information System (INIS)

Hwang, Moon Kyu; Chung, Bub Dong

2010-01-01

The more realistic containment pressure variation predicted by the CONTAIN code through the coupled analysis during a large break loss of coolant accident in the nuclear power plant is expected to provide more accurate prediction for the plant behavior than a standalone MARS-KS calculation. The input deck has been generated based on the already available ARP- 1400 input for CONTEMPT code. Similarly to the CONTEMPT input deck, a simple two-cell model was adopted to model the containment behavior, one cell for the containment inner volume and another cell for the environment condition. The developed input for the CONTAIN code is to be eventually applied for the coupled code calculation of MARS-KS/CONTAIN

Aging characteristics of containment building and sensitivity on ultimate pressure capacity

International Nuclear Information System (INIS)

Seo, Jeong Moon; Choun, Young Sun; Choi, In Kil; Ha, Jae Joo

1998-03-01

For the reliable safety assessment of the containment building, structural and material conditions can be investigated in detail and pertinent assessment technologies have to be established. Also, an understanding on the aging-related degradations for the construction materials is required to predict long-term structural safety of the containment building. For the development of reliable aging prediction models, an extensive data base system related to aging properties of the containment building has to be prepared. The objectives of this research are to develop aging models representing long-term degradation of materials and a structural performance assessment program for containment building considering aging-related degradation. According to the results of sensitivity analysis, as the mechanical properties of the constituent materials degrade, the ultimate pressure capacity of containment building may decrease and severe damage may occur around the mid-level of the containment wall. (author). 28 refs., 11 tabs., 36 figs

Methodology of a PWR containment analysis during a thermal-hydraulic accident

Energy Technology Data Exchange (ETDEWEB)

Silva, Dayane F.; Sabundjian, Gaiane; Lima, Ana Cecilia S., E-mail: dayane.silva@usp.br, E-mail: gdjian@ipen.br, E-mail: aclima@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2015-07-01

The aim of this work is to present the methodology of calculation to Angra 2 reactor containment during accidents of the type Loss of Coolant Accident (LOCA). This study will be possible to ensure the safety of the population of the surroundings upon the occurrence of accidents. One of the programs used to analyze containment of a nuclear plant is the CONTAIN. This computer code is an analysis tool used for predicting the physical conditions and distributions of radionuclides inside a containment building following the release of material from the primary system in a light-water reactor during an accident. The containment of the type PWR plant is a concrete building covered internally by metallic material and has limits of design pressure. The methodology of containment analysis must estimate the limits of pressure during a LOCA. The boundary conditions for the simulation are obtained from RELAP5 code. (author)

Methodology of a PWR containment analysis during a thermal-hydraulic accident

International Nuclear Information System (INIS)

Silva, Dayane F.; Sabundjian, Gaiane; Lima, Ana Cecilia S.

2015-01-01

The aim of this work is to present the methodology of calculation to Angra 2 reactor containment during accidents of the type Loss of Coolant Accident (LOCA). This study will be possible to ensure the safety of the population of the surroundings upon the occurrence of accidents. One of the programs used to analyze containment of a nuclear plant is the CONTAIN. This computer code is an analysis tool used for predicting the physical conditions and distributions of radionuclides inside a containment building following the release of material from the primary system in a light-water reactor during an accident. The containment of the type PWR plant is a concrete building covered internally by metallic material and has limits of design pressure. The methodology of containment analysis must estimate the limits of pressure during a LOCA. The boundary conditions for the simulation are obtained from RELAP5 code. (author)

Study on Java Programming Education

OpenAIRE

太田, 信宏

2009-01-01

The purpose of this study is to consider the content and key points for inclusion in a Java programming course for beginners. The Java programming language has a variety of functions and has the largest application field of all such languages, containing many themes that are appropriate for any such programming course. The multifunctional and wide-ranging functions of Java, however, may actually act as a barrier to study for beginners. The core content of a programming class for beginners sho...

Prenatal Experiences of Containment in the Light of Bion's Model of Container/Contained

Science.gov (United States)

Maiello, Suzanne

2012-01-01

This paper explores the idea of possible proto-experiences of the prenatal child in the context of Bion's model of container/contained. The physical configuration of the embryo/foetus contained in the maternal uterus represents the starting point for an enquiry into the unborn child's possible experiences of its state of being contained in a…

Automated method for determining location and magnitude of leaks inside a PWR containment

International Nuclear Information System (INIS)

Cho, J.H.; Elia, F.A. Jr.

1986-01-01

Thermal-hydraulics analysis can be used to determine location and magnitude of leaks inside a pressurized water reactor (PWR) containment, as required by plant technical specifications. The major advantage of this detection method is that it minimizes radiation exposure of maintenance personnel because most of the leak detection process is performed from the control room outside the containment. In addition, such a program allows for the elimination of pipe whip restraints and jet impingement shields, eliminating costs for maintenance of these supports and shields in older plants and lowering construction costs for new plants. Previously, only simple single-node containment models were used for determining leakage magnitude. This paper presents a more sophisticated multinode approach for determining the magnitude and location. The resulting sensitivities to leak can be programmed into the plant's computer system. In this way, the plant's computer will be able to measure and locate leaks inside containment. The study concludes that dew point temperature (or relative humidity) is the most suitable parameter for locating a leak while flow rate to sump is the most suitable parameter for quantifying the leak

Resource programs: Draft Environmental Impact Statement Resource Programs

International Nuclear Information System (INIS)

1992-03-01

Every two years, Bonneville Power Administration (BPA) prepares a Resource Program which identifies the resource actions BPA will take to meet its obligation to serve the forecasted power requirements of its customers. The Resource Program's Environmental Impact Statement (RPEIS) is a programmatic environmental document which will support decisions made in several future Resource Programs. Environmental documents tiered to the EIS may be prepared on a site-specific basis. The RPEIS includes a description of the environmental effects and mitigation for the various resource types available in order to evaluate the trade-offs among them. It also assesses the environmental impacts of adding thirteen alternative combinations of resources to the existing power system. This report contains the appendices to the RPEIS

Continuous containment monitoring with containment pressure fluctuation

International Nuclear Information System (INIS)

Dick, J.E.

1996-01-01

The monitoring of the integrity of containments particularly but not exclusively for nuclear plants is dealt with in this invention. While this application is primarily concerned with containment monitoring in the context of the single unit design, it is expected that the concepts presented will be universally applicable to any containment design, including containments for non-nuclear applications such as biological laboratories. The nuclear industry has long been interested in a means of monitoring containment integrity on a continuous basis, that is, while the reactor is operating normally. 12 refs., 2 figs

GPE-BWR and the containment venting and filtering issue

International Nuclear Information System (INIS)

Palomo, J.; Santiago, J. de

1988-01-01

The Spanish Boiling Water Reactor Owner's Group (GPE-BWR) is formed by three utilities, owning four units: Santa Maria de Garona (46 MWe, BWR3, Mark I containment), Cofrentes (975 MWe, BWR6, Mark III containment) and Valdecaballeros (2x975 MWe, BWR6, Mark III containment) - all of the reactors having been supplied by General Electric. One of the GPE-BWR's several committees is the Safety and Licensing Committee, which follows up the evolution of severe accident topics and particularly the containment venting and filtering issue. In September 1987, the Consejo de Seguridad Nuclear (CSN), the Spanish Regulatory Body, asked the GPE-BWR to define its position on the installation of a containment venting system. The GPE-BWR created a Working Group which presented a Report on Containment Venting to the CSN in January 1987 gathered from: the US Nuclear Regulatory Commission (NRC); some US utilities; and several European countries, especially France, Germany and Sweden. CSN's review of the containment venting Report and the Action Plan proposed by the GPE-BWR finished in April 1988. The conclusion of the Report and the proposed Action Plan take into account the US NRC's identified open items on severe accidents and the R and D programs scheduled to close these items

Real quartic surfaces containing 16 skew lines

Directory of Open Access Journals (Sweden)

Isidro Nieto

2004-01-01

Full Text Available It is well known that there is an open three-dimensional subvariety Ms of the Grassmannian of lines in ℙ3 which parametrizes smooth irreducible complex surfaces of degree 4 which are Heisenberg invariant, and each quartic contains 32 lines but only 16 skew lines, being determined by its configuration of lines, are called a double 16. We consider here the problem of visualizing in a computer the real Heisenberg invariant quartic surface and the real double 16. We construct a family of points l∈Ms parametrized by a two-dimensional semialgebraic variety such that under a change of coordinates of l into its Plüecker, coordinates transform into the real coordinates for a line L in ℙ3, which is then used to construct a program in Maple 7. The program allows us to draw the quartic surface and the set of transversal lines to L. Additionally, we include a table of a group of examples. For each test example we specify a parameter, the viewing angle of the image, compilation time, and other visual properties of the real surface and its real double 16. We include at the end of the paper an example showing the surface containing the double 16.

Description of the CONTAIN input model for the Dodewaard nuclear power plant

International Nuclear Information System (INIS)

Velema, E.J.

1992-02-01

This report describes the ECN standard CONTAIN input model for the Dodewaard Nuclear Power Plant (NPP) that has been developed by ECN. This standard input model will serve as a basis for analyses of the phenomena which may occur inside the Dodewaard containment in the event of a postulated severe accident. Boundary conditions for specific containment analyses can easily be implemented in the input model. as a result ECN will be able to respond quickly on requests for analyses from the utilities of the authorities. The report also includes brief descriptions of the Dodewaard NPP and the CONTAIN computer program. (author). 7 refs.; 5 figs.; 3 tabs

Evaluation of a hydrogen sensor for nuclear reactor containment monitoring

International Nuclear Information System (INIS)

Hoffheins, B.S.; McKnight, T.E.; Lauf, R.J.; Smith, R.R.; James, R.E.

1997-01-01

Measurement of hydrogen concentration in containment atmospheres in nuclear plants is a key safety capability. Current technologies require extensive sampling systems and subsequent maintenance and calibration costs can be very expensive. A new hydrogen sensor has been developed that is small and potentially inexpensive to install and maintain. Its size and low power requirement make it suitable in distributed systems for pinpointing hydrogen buildup. This paper will address the first phase of a testing program conducted to evaluate this sensor for operation in reactor containments

Users' guide to CACECO containment analysis code. [LMFBR

Energy Technology Data Exchange (ETDEWEB)

Peak, R.D.

1979-06-01

The CACECO containment analysis code was developed to predict the thermodynamic responses of LMFBR containment facilities to a variety of accidents. The code is included in the National Energy Software Center Library at Argonne National Laboratory as Program No. 762. This users' guide describes the CACECO code and its data input requirements. The code description covers the many mathematical models used and the approximations used in their solution. The descriptions are detailed to the extent that the user can modify the code to suit his unique needs, and, indeed, the reader is urged to consider code modification acceptable.

Transient analysis of LMFBR reinforced/prestressed concrete containment

International Nuclear Information System (INIS)

Marchertas, A.H.; Belytschko, T.B.; Bazant, Z.P.

1979-01-01

The use of prestressed concrete reactor vessels (PCRVs) for LMFBR containment creates a need for analytical methods for treating the transient response of such structures, for LMFBR containments must be capable of sustaining the dynamic effects which arise in a hypothetical core disruptive accident (HCDA). These analyses require several unique features: a model of concrete which includes tensile cracking, a methodology for representing the prestressing tendons and for simulating the prestressing operation, and an efficient computational tool for treating the transient response. Furthermore, for the sake of convenience, all of these features should be available in a single computer code. For the purpose of treating the transient response, a finite element program with explicit time integration was chosen. The use of explicit time integration has the advantage that it can easily treat the complicated constitutive model which arises from the considerations of concrete cracking and it can handle the slip between reinforcing tendons and the concrete through the use of the well known sliding interface options. However, explicit time integration programs are usually not well suited to the simulation of static processes such as prestressing. Nevertheless, explicit time integration programs can handle static processes through the introduction of damping by what is known as a dynamic relaxation procedure. For this reason, the dynamic relaxation procedure was refined through the introduction of lumped mass, viscous damping. This provision made the prestressing operation of the concrete structures by means of the explicit formulation rather convenient. (orig.)

Risk analysis of in-service pressure piping containing defects

International Nuclear Information System (INIS)

Lin, Y.C.; Xie, Y.J.; Wang, X.H.; Luo, H.

2004-01-01

The reliability of pressure piping containing defects is important in engineering. The failure probability of pressure piping containing defects may be used as a guide to the most economic deployment of resources on maintenance, inspection and repair. This paper presents a probabilistic assessment methodology for in-service pressure piping containing defects, which is especially designed for programming. It is based on three assessment codes, BS 7910, R6 and SAPV-99, considering uncertainties in operating loadings, flaw sizes, material fracture toughness and flow stress. A general sampling computation method of stress intensity factor (SIF), in the form of the relationship between SIF and axial force and bending moment and torsion, is adopted. This relationship has been successfully used in developing software, Safety Assessment System of In-service Pressure Piping Containing Flaws (SAPP-2003), to assess planar and non-planar flaws. A numerical example is presented to illustrate the application of SAPP-2003 for calculating the failure probabilities of separate defects and for the assessed pressure piping

Computer program of iodine removal in the LWR containment vessel under LOCA conditions, MIRA-PB

International Nuclear Information System (INIS)

Nishio, Gunji; Tanaka, Mitsugu; Tamura, Tomohiko.

1978-03-01

LWR plants have a containment system for reactor safety consisting of spray and air cleaning filter. R.L.Ritzman of Battele Columbus Lab. developed computer code MIRAP/MIRAB for predicting iodine removal by containment system for PWR and BWR; which has some problem, however. The computer code MIRA-PB prepared by the authors is a modification of MIRAP/MIRAB. (auth.)

Concrete containment integrity software: Procedure manual and guidelines

International Nuclear Information System (INIS)

Dameron, R.A.; Dunham, R.S.; Rashid, Y.R.

1990-06-01

This report is an executive summary describing the concrete containment analysis methodology and software that was developed in the EPRI-sponsored research to predict the overpressure behavior and leakage of concrete containments. A set of guidelines has been developed for performing reliable 2D axisymmetric concrete containment analysis with a cracking concrete constitutive model developed by ANATECH. The software package developed during this research phase is designed for use in conjunction with ABAQUS-EPGEN; it provides the concrete model and automates axisymmetric grid preparation, and rebar generation for 2D and 3D grids. The software offers the option of generating pre-programmed axisymmetric grids that can be tailored to a specific containment by input of a few geometry parameters. The goal of simplified axisymmetric analysis within the framework of the containment leakage prediction methodology is to compute global liner strain histories at various locations within the containment. A simplified approach for generating peak liner strains at structural discontinuities as function of the global liner strains has been presented in a separate leakage criteria document; the curves for strain magnification factors and liner stress triaxiality factors found in that document are intended to be applied to the global liner strain histories developed through global 2D analysis. This report summarizes the procedures for global 2D analysis and gives an overview of the constitutive model and the special purpose concrete containment analysis software developed in this research phase. 8 refs., 10 figs

Non-linear dynamic response of reactor containment

International Nuclear Information System (INIS)

Takemori, T.; Sotomura, K.; Yamada, M.

1975-01-01

A computer program was developed to investigate the elasto-plastic behavior of structures. This program is outlined and the problems of non-linear response of structures are discussed. Since the mode superposition method is only valid in an elastic analysis, the direct integration method was adopted here. As the sample model, an actual reactor containment (reactor building) of PWR plant was adopted. This building consists of three components, that is, a concrete internal structure, a steel containment vessel and a concrete outer shield wall. These components are resting on a rigid foundation mat. Therefore they were modeled with a lumped mass model respectively and coupled on the foundation. The following assumptions were employed to establish the properties of dynamic model: rocking and swaying springs of soil can be obtained from an elastic half-space solution, and the hysteretic characteristic of springs is bi-linear; springs connecting each mass are dealt with shear beams so that both bending and shear deflections can be included (Hysteretic characteristics of springs are linear, bi-linear and tri-linear for the internal structure, the containment vessel and the outer shield wall, respectively); generally, each damping coefficient is given for each mode in modal superposition (However, a damping matrix must be made directly in a non-linear response). Therefore the damping matrix of the model was made by combining the damping matrices [C] of each component obtained by Caughy's method and a damping value of the rocking and swaying by the half-space solution. On the basis of above conditions, the non-linear response of the structure was obtained and the difference between elastic and elasto-plastic analysis is presented

Solid Waste Program technical baseline description

Energy Technology Data Exchange (ETDEWEB)

Carlson, A.B.

1994-07-01

The system engineering approach has been taken to describe the technical baseline under which the Solid Waste Program is currently operating. The document contains a mission analysis, function analysis, system definition, documentation requirements, facility and project bases, and uncertainties facing the program.

1981 laser program annual report

Energy Technology Data Exchange (ETDEWEB)

1982-08-01

This report is published in sections that correspond to the division of technical activity in the Program. Section 1 provides a Program Overview, presenting highlights of the technical accomplishments of the elements of the Program, a summary of activities carried out under the Glass Laser Experiments Lead Laboratory Program, as well as discussions of Program resources and facilities. Section 2 covers the work on solid-state Nd:glass lasers, including systems operations and Nova and Novette systems development. Section 3 reports on target-design activities, plasma theory and simulation, code development, and atomic theory. Section 4 presents the accomplishments of the Target Fabrication group, Section 5 contains the results of our diagnostics development, and Section 6 reports the results of laser-target experiments conducted during the year, along with supporting research and development activities. Section 7 presents the results from laser research and development, including solid-state R and D and the theoretical and experimental research on advanced lasers. Section 8 contains the results of studies in areas of energy and military applications, including those relating to electrical energy production by inertial-confinement fusion systems.

1981 laser program annual report

International Nuclear Information System (INIS)

1982-08-01

This report is published in sections that correspond to the division of technical activity in the Program. Section 1 provides a Program Overview, presenting highlights of the technical accomplishments of the elements of the Program, a summary of activities carried out under the Glass Laser Experiments Lead Laboratory Program, as well as discussions of Program resources and facilities. Section 2 covers the work on solid-state Nd:glass lasers, including systems operations and Nova and Novette systems development. Section 3 reports on target-design activities, plasma theory and simulation, code development, and atomic theory. Section 4 presents the accomplishments of the Target Fabrication group, Section 5 contains the results of our diagnostics development, and Section 6 reports the results of laser-target experiments conducted during the year, along with supporting research and development activities. Section 7 presents the results from laser research and development, including solid-state R and D and the theoretical and experimental research on advanced lasers. Section 8 contains the results of studies in areas of energy and military applications, including those relating to electrical energy production by inertial-confinement fusion systems

Radionuclide containment in soil by phosphate treatment

International Nuclear Information System (INIS)

Lee, S.Y.; Francis, C.W.; Timpson, M.E.; Elless, M.P.

1995-01-01

Radionuclide transport from a contaminant source to groundwater and surface water is a common problem faced by most US Department of Energy (DOE) facilities. Containment of the radionuclide plume, including strontium-90 and uranium, is possible using phosphate treatment as a chemical stabilizer. Such a chemical process occurs in soils under natural environmental conditions. Therefore, the concept of phosphate amendment for radiostrontium and uranium immobilization is already a proven principle. In this presentation, results of bench-scale experiments and the concept of a field-scale demonstration are discussed. The phosphate treatment is possible at the source or near the advancing contaminant plume. Cleanup is still the ideal concept; however, containment through stabilization is a more practical and costeffective concept that should be examined by DOE Environmental Restoration programs

Mississippi Curriculum Framework for Automotive Mechanics (Program CIP: 47.0604--Auto/Automotive Mechanic/Tech). Secondary Programs.

Science.gov (United States)

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which reflects Mississippi's statutory requirement that instructional programs be based on core curricula and performance-based assessment, contains outlines of the instructional units required in local instructional management plans and daily lesson plans for automotive mechanics I and II. Presented first are a program description…

Radiolysis effects on fuel corrosion within a failed nuclear waste container

International Nuclear Information System (INIS)

Sunder, S.; Shoeshmith, D.W.; Christensen, H.C.

2003-01-01

The concept of geological disposal of used nuclear fuel in corrosion resistant containers is being investigated in several countries. In the Canadian Nuclear Fuel Waste Management Program (CNFWMP), it is assumed that the used fuel will be disposed of in copper containers. Since the predicted lifetimes of these containers are very long (>106 years), only those containers emplaced with an undetected defect will fail within the period for which radionuclide release from the fuel must be considered. Early failure could lead to the entry of water into the container and subsequent release of radionuclides. The release rate of radionuclides from the used fuel will depend upon its dissolution rate. The primary mechanism for release will be the corrosion of the fuel driven by radiolytically-produced oxidants. The studies carried out to determine the effects of water radiolysis on fuel corrosion are reviewed, and some of the procedures used to predict corrosion rates of used fuel in failed nuclear waste containers described. (author)

New developments in containment in-service inspection requirements

International Nuclear Information System (INIS)

Staffiera, J.E.

1995-01-01

Section 11 of the ASME Boiler and Pressure Vessel Code contains requirements for inservice inspection of nuclear power plant components. Development of ASME Code requirements for containment inservice inspection was begun in 1977, and in 1979 the first such requirements were published in the form of Code Case N-236. Formal inclusion of these requirements in Section 11 of the ASME Code occurred with publication of Subsection IWE, ''Rules for inservice Inspection of Class MC Components of Nuclear Power Plants,'' in the 1980 Edition, Winter 1981 Addenda. At that time, inspection emphasis on nuclear power construction and operation activities was placed on welds and welding processes associated with steel containments and metallic liners of concrete containments. The need for repair-welding requirements was necessitated by containment design modifications for conditions not considered in several original plant designs. Welds in steel containments and metallic liners of concrete containments have not required significant amounts of repair, however, degradation of base metal in containments has become a major concern. Various degradation mechanisms have been identified as potential causes of damage to containment surfaces, including fatigue, corrosion and material embrittlement due to long-term radiation exposure. As a result of these concerns, and in response to comments generated by the Committee to Review Generic Requirements (CRGR) of the NRC in its review of Subsection IWE, emphasis on weld-based inservice inspection was redirected toward a containment-surface inservice inspection program. Significant changes were made to accommodate this re-emphasis. The majority of these changes were published in the 1992 Edition, with the 1992 Addenda, of Subsection IWE. The NRC Proposed Rulemaking was issued for a 75-day public comment period in January, 1994. This period was extended at the request of nuclear industry organizations to allow for meaningful evaluation

African Social Studies Program-1, 1988-89. Final Report. A Master's Degree Program for African Social Studies Leaders.

Science.gov (United States)

Indiana Univ., Bloomington.

This paper presents the final report on a project that brought African social studies education leaders to Indiana University (Bloomington) to take part in a Master's Degree program. The report contains a brief history of the program, a description of the program, a discussion of issues relating to acculturation, an evaluation, a list of…

Solid Waste Program Fiscal Year 1996 Multi-Year Program Plan WBS 1.2.1, Revision 1

International Nuclear Information System (INIS)

1995-09-01

This document contains the Fiscal Year 1996 Multi-Year Program Plan for the Solid Waste Program at the Hanford Reservation in Richland, Washington. The Solid Waste Program treats, stores, and disposes of a wide variety of solid wastes consisting of radioactive, nonradioactive and hazardous material types. Solid waste types are typically classified as transuranic waste, low-level radioactive waste, low-level mixed waste, and non-radioactive hazardous waste. This report describes the mission, goals and program strategies for the Solid Waste Program for fiscal year 1996 and beyond

Solid Waste Program Fiscal Year 1996 Multi-Year Program Plan WBS 1.2.1, Revision 1

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-01

This document contains the Fiscal Year 1996 Multi-Year Program Plan for the Solid Waste Program at the Hanford Reservation in Richland, Washington. The Solid Waste Program treats, stores, and disposes of a wide variety of solid wastes consisting of radioactive, nonradioactive and hazardous material types. Solid waste types are typically classified as transuranic waste, low-level radioactive waste, low-level mixed waste, and non-radioactive hazardous waste. This report describes the mission, goals and program strategies for the Solid Waste Program for fiscal year 1996 and beyond.

Program evaluation

Energy Technology Data Exchange (ETDEWEB)

1988-01-01

This book contains the proceedings from the panel on program evaluation. Some of the papers included are the following: Seattle City Light's Industrial Retrofit Demonstration Project Uses Quasi-Experimental Research Design and Metering to Measure Savings, Evaluation for PUCs, and The Takeback Effect Low-income Weatherizations Fact or Fiction

Containment

International Nuclear Information System (INIS)

Anon.

1987-01-01

The primary mission of the Containment Group is to ensure that underground nuclear tests are satisfactorily contained. The main goal is the development of sound technical bases for containment-related methodology. Major areas of activity include siting, geologic description, emplacement hole stemming, and phenomenological predictions. Performance results of sanded gypsum concrete plugs on the Jefferson, Panamint, Cornucopia, Labquark, and Bodie events are given. Activities are also described in the following areas: computational capabilities site description, predictive modeling, and cavity-pressure measurement. Containment publications are listed. 8 references

Assessment of Loads and Performance of a Containment in a Hypothetical Accident (ALPHA). Facility design report

International Nuclear Information System (INIS)

Yamano, Norihiro; Maruyama, Yu; Kudo, Tamotsu; Moriyama, Kiyofumi; Ito, Hideo; Komori, Keiichi; Sonobe, Hisao; Sugimoto, Jun

1998-06-01

In the ALPHA (Assessment of Loads and Performance of Containment in Hypothetical Accident) program, several tests have been performed to quantitatively evaluate loads to and performance of a containment vessel during a severe accident of a light water reactor. The ALPHA program focuses on investigating leak behavior through the containment vessel, fuel-coolant interaction, molten core-concrete interaction and FP aerosol behavior, which are generally recognized as significant phenomena considered to occur in the containment. In designing the experimental facility, it was considered to simulate appropriately the phenomena mentioned above, and to cover experimental conditions not covered by previous works involving high pressure and temperature. Experiments from the viewpoint of accident management were also included in the scope. The present report describes design specifications, dimensions, instrumentation of the ALPHA facility based on the specific test objectives and procedures. (author)

An introduction to programming with specifications

CERN Document Server

1991-01-01

A feature of modern advanced computing is the functional approach to programming. In this book, the authors present an introduction to the mathematics which underline functional programming, emphasizing the understanding of definition and specification--a prerequisite of good programming and problem solving with a computer. The book is self-contained, requiring a low level of mathematical sophistication and may be used as an introduction to the mathematics of programming.Provides an introduction to the functional approach to programming**Emphasizes the problem to be solved, not the pro

Design report for the interim waste containment facility at the Niagara Falls Storage Site

International Nuclear Information System (INIS)

1986-05-01

Low-level radioactive residues from pitchblende processing and thorium- and radium-contaminated sand, soil, and building rubble are presently stored at the Niagara Falls Storage Site (NFSS) in Lewiston, New York. These residues and wastes derive from past NFSS operations and from similar operations at other sites in the United States conducted during the 1940s by the Manhattan Engineer District (MED) and subsequently by the Atomic Energy Commission (AEC). The US Department of Energy (DOE), successor to MED/AEC, is conducting remedial action at the NFSS under two programs: on-site work under the Surplus Facilities Managemnt Program and off-site cleanup of vicinity properties under the Formerly Utilized Sites Remedial Action Program. On-site remedial action consists of consolidating the residues and wastes within a designated waste containment area and constructing a waste containment facility to prevent contaminant migration. The service life of the system is 25 to 50 years. Near-term remedial action construction activities will not jeopardize or preclude implementation of any other remedial action alternative at a later date. Should DOE decide to extend the service life of the system, the waste containment area would be upgraded to provide a minimum service life of 200 years. This report describes the design for the containment system. Pertinent information on site geology and hydrology and on regional seismicity and meteorology is also provided. Engineering calculations and validated computer modeling studies based on site-specific and conservative parameters confirm the adequacy of the design for its intended purposes of waste containment and environmental protection

Preliminary analysis of a 1:4 scale prestressed concrete containment vessel model

International Nuclear Information System (INIS)

Dameron, R.A.; Rashid, Y.R.; Luk, V.K.; Hessheimer, M.F.

1997-01-01

Sandia National Laboratories is conducting a research program to investigate the integrity of nuclear containment structures. As part of the program Sandia will construct an instrumented 1:4 scale model of a prestressed concrete containment vessel (PCCV) for pressurized water reactors (PWR), which will be pressure tested up to its ultimate capacity. One of the key program objectives is to develop validated methods to predict the structural performance of containment vessels when subjected to beyond design basis loadings. Analytical prediction of structural performance requires a stepwise, systematic approach that addresses all potential failure modes. The analysis effort includes two and three-dimensional nonlinear finite element analyses of the PCCV test model to evaluate its structural performance under very high internal pressurization. Such analyses have been performed using the nonlinear concrete constitutive model, ANACAP-U, in conjunction with the ABAQUS general purpose finite element code. The analysis effort is carried out in three phases: preliminary analysis; pretest prediction; and post-test data interpretation and analysis evaluation. The preliminary analysis phase serves to provide instrumentation support and identify candidate failure modes. The associated tasks include the preliminary prediction of failure pressure and probable failure locations and the development of models to be used in the detailed failure analyses. This paper describes the modeling approaches and some of the results obtained in the first phase of the analysis effort

Emerging rabbit haemorrhagic disease virus 2 (RHDV2) at the gates of the African continent.

Science.gov (United States)

Martin-Alonso, Aarón; Martin-Carrillo, Natalia; Garcia-Livia, Katherine; Valladares, Basilio; Foronda, Pilar

2016-10-01

Until the beginning of this decade, the genetic characterization of rabbit haemorrhagic disease virus (RHDV) from Iberian Peninsula had revealed the existence of two genogroups, G1 and sporadically G6. In 2010, the new emerging rabbit haemorrhagic disease variant, RHDV2 or RHDVb, was described in France, from where it has rapidly spread throughout Europe, including Iberian Peninsula countries. Nevertheless, although cases of rabbit haemorrhagic disease (RHD) have been reported in the Canary Islands, a Spanish archipelago located 100km off the coast of Morocco, no genetic characterization of RHDV had been carried out. Consequently, in order to identify the circulating RHDV strains in this archipelago, liver samples of six farm rabbits and fifteen wild rabbits were collected from several areas of the largest island, Tenerife, and analyzed for the presence of RHDV by antigen capture double antibody sandwich ELISA. In case of positive ELISA result, we amplified and sequenced two fragments of the vp60 gene, which were concatenated for phylogenetic purposes. The sequences analysis revealed the presence of RHDV2 in both farm and wild rabbits from several areas of Tenerife. This result constitutes the first finding of RHDV2 in the Canary Islands. These RHDV2 strains found in Tenerife shared two exclusive SNPs that have not been observed in the rest of RHDV2 strains. The identification of RHDV2 and the absence of classic RHDV strains in this study suggest that RHDV2 may be replacing classic strains in Tenerife, as has been also proposed in Iberian Peninsula, France and Azores. Given the proximity of the Canary Islands to the African continent, this result should raise awareness about a possible dispersal of RHDV2 from the Canary Islands to the North of Africa. Copyright © 2016 Elsevier B.V. All rights reserved.

Quality assurance requirements and description for the Civilian Radioactive Waste Management Program

International Nuclear Information System (INIS)

1992-01-01

The Quality Assurance Requirements and Description (QARD) is the principal quality assurance document for the Civilian Radioactive Waste Management Program (Program). It establishes the minimum requirements for the Quality Assurance Program. The QARD contains regulatory requirements and program commitments necessary for the development of an effective quality assurance program. Quality assurance implementing documents must be based on, and consistent with, QARD requirements. The QARD applies to the following: (1) acceptance of spent nuclear fuel and high-level radioactive waste; (2) transport of spent nuclear fuel and high-level radioactive waste; (3) the Monitored Retrievable Storage (MRS) facility through application for an operating license; (4) Mined Geologic Disposal System (MGDS), including the site characterization activities (exploratory studies facility (ESF) and surface based testing), through application for an operating license; (5) the high-level-waste form from production through acceptance. Section 2.0 defines in greater detail criteria for determining work subject to QARD requirements. The QARD is organized into sections, supplements, appendices, and a glossary. The sections contain requirements that are common to all Program elements. The supplements contain requirements for specialized activities. The appendices contain requirements that are specific to an individual Program element. The glossary establishes a common vocabulary for the Quality Assurance Program

Space Program Annual Report, For Approval

International Nuclear Information System (INIS)

TM Schaefer

2004-01-01

Knolls Atomic Power Laboratory (KAPL) (lead) has been requested by the Reference to create an unclassified report on the Prometheus Program's Jupiter Icy Moons Orbiter (JIMO) mission. This report is expected to be issued annually and be similar in level of content and scope to the NR Program's annual report ''The United States Naval Nuclear Propulsion Program'' (referred to as the Grey Book). The attachment to this letter provides a draft of the Prometheus Program report for NR review and approval. As stated in the Reference, a March 2005 issuance is planned following a coordinated NR Headquarter's review. The information contained in the attached report was obtained from open literature sources, NASA documents and Naval Reactors Program literature. The photographs contained in the report are drafts and their quality will be improved in the final version of the report. This report has been reviewed by the KAPL and Bettis Space Power Plant Staff and has been concurred with by the Manager of Space Power Plant (MJ Wollman) and the Manager of Bettis Reactor Engineering (C Eshelman)

Functional and Logic Programming - 14th International Symposium (FLOPS 2018)

DEFF Research Database (Denmark)

This volume contains the proceedings of the 14th International Symposium on Functional and Logic Programming - FLOPS 2018 - held in Nagoya, Japan, May 9 - 11, 2018......This volume contains the proceedings of the 14th International Symposium on Functional and Logic Programming - FLOPS 2018 - held in Nagoya, Japan, May 9 - 11, 2018...

Genetically programmed expression of proteins containing the unnatural amino acid phenylselenocysteine

Science.gov (United States)

Wang, Jiangyun; Schultz, Peter G.

2010-09-07

The invention relates to orthogonal pairs of tRNAs and aminoacyl-tRNA synthetases that can incorporate the unnatural amino acid phenylselenocysteine into proteins produced in eubacterial host cells such as E. coli. The invention provides, for example but not limited to, novel orthogonal aminoacyl-tRNA synthetases, polynucleotides encoding the novel synthetase molecules, methods for identifying and making the novel synthetases, methods for producing proteins containing the unnatural amino acid phenylselenocysteine and translation systems. The invention further provides methods for producing modified proteins (e.g., lipidated proteins) through targeted modification of the phenylselenocysteine residue in a protein.

SHPPS 2006: School Health Policies and Programs Study--Foods and Beverages Sold Outside of the School Meals Programs

Science.gov (United States)

Centers for Disease Control and Prevention, 2007

2007-01-01

The School health Policies and Programs Study (SHPPS) is a national survey periodically conducted to assess school health policies and programs at the state, district, school, and classroom levels. This brief reports study results in the area of foods and beverages sold outside of the school meals program. (Contains 3 tables, 1 figure, and 2…

Containment and surveillance for software

International Nuclear Information System (INIS)

Andress, J.C.; Adams, G.N.; Cotton, J.H.

1993-07-01

Some operators and state authorities are offering their computer systems, both hardware and software, to be used for safeguards purposes by the International Atomic Energy Agency. Therefore a need exists to develop a method of authenticating the data produced by a computer program before it can be used by the Agency. As part of a complete Computer Systems Authentication (COMSAT) package, a method of software containment and surveillance has been developed to compliment existing software authentication techniques. The package is applicable to both operator and Agency provided systems. A program to demonstrate the principles has been written. With this facility, the Agency will be able to leave unattended software in the field, either to be used by the operator to generate data for inspection on their own computer, or to save an inspector having to re-install inspection-specific software on an Agency computer, in the knowledge that the operation of the protected computer is being continuously monitored. If adopted, either of these uses will enable the Agency to reduce their costs. (Author)

Kuosheng BWR/6 containment safety analysis with gothic code

International Nuclear Information System (INIS)

Lin Ansheng; Wang Jongrong; Yuann Rueyyng; Shih Chunkuan

2011-01-01

Kuosheng Nuclear Power Plant in Taiwan is a GE-designed twin-unit BWR/6 plant, each unit rated at 2894 MWt. In this study, we presented the calculated results of the containment pressure and temperature responses after the main steam line break accident, which is the design basis for the containment system. During the simulation, a power of SPU range (105.1%) was used and a model of the Mark III type containment was built using the containment thermal-hydraulic program GOTHIC. The simulation consists of short and long-term responses. The drywell pressure and temperature responses which display the maximum values in the early state of the LOCA were investigated in the short-term response; the primary containment pressure and temperature responses in the long-term response. The blowdown flow was provided by FSAR and used as boundary conditions in the short-term model; in the long-term model, the blowdown flow was calculated using a GOTHIC built-in homogeneous equilibrium model. In the long-term analysis, a simplifier RPV model was employed to calculate the blowdown flow. Finally, the calculated results, similar to the FSAR results, indicate the GOTHIC code has the capability to simulate the pressure/temperature response of Mark III containment to the main steam line break LOCA. (author)

Identification and assessment of containment and release management strategies

International Nuclear Information System (INIS)

Lehner, J.R.; Lin, C.C.; Neogy, P.

1990-01-01

Brookhaven National Laboratory, under the auspices of the U.S. Nuclear Regulatory Commission, is investigating accident management strategies which could help preserve containment integrity or minimize releases during a severe accident. The objective is to make use of existing plant systems and equipment in innovative ways to reduce the likelihood of containment failure or to mitigate the release of fission products to the environment if failure cannot be prevented. Many of these strategies would be implemented during the later stages of a severe accident (i.e., after vessel breach) and sizeable uncertainties exist regarding some of the phenomena involved. A majority of the strategies identified go well beyond existing procedures and often depend on the specific containment type. Strategies for all of the five different containments used in the U.S. are being considered: BWR Mark I, Mark II, and Mark III, as well as PWR ice condenser and large dry containments. Accident management strategies related to the in-vessel phase of a severe core melt accident are being dealt with under another NRC program. For each containment type the most likely challenges are identified and existing emergency guidelines and procedures are reviewed as to how they address these challenges

Containment and storage of uranium hexafluoride at US Department of Energy uranium enrichment plants

International Nuclear Information System (INIS)

Barlow, C.R.; Alderson, J.H.; Blue, S.C.; Boelens, R.A.; Conkel, M.E.; Dorning, R.E.; Ecklund, C.D.; Halicks, W.G.; Henson, H.M.; Newman, V.S.; Philpot, H.E.; Taylor, M.S.; Vournazos, J.P.; Pryor, W.A.; Ziehlke, K.T.

1992-07-01

Isotopically depleted UF 6 (uranium hexafluoride) accumulates at a rate five to ten times greater than the enriched product and is stored in steel vessels at the enrichment plant sites. There are approximately 55,000 large cylinders now in storage at Paducah, Kentucky; Portsmouth, Ohio; and Oak Ridge, Tennessee. Most of them contain a nominal 14 tons of depleted UF 6 . Some of these cylinders have been in the unprotected outdoor storage environment for periods approaching 40 years. Storage experience, supplemented by limited corrosion data, suggests a service life of about 70 years under optimum conditions for the 48-in. diameter, 5/16-in.-wall pressure vessels (100 psi working pressure), using a conservative industry-established 1/4-in.-wall thickness as the service limit. In the past few years, however, factors other than atmospheric corrosion have become apparent that adversely affect the serviceability of small numbers of the storage containers and that indicate the need for a managed program to ensure maintenance ofcontainment integrity for all the cylinders in storage. The program includes periodic visual inspections of cylinders and storage yards with documentation for comparison with other inspections, a group of corrosion test programs to permit cylinder life forecasts, and identification of (and scheduling for remedial action) situations in which defects, due to handling damage or accelerated corrosion, can seriously shorten the storage life or compromise the containment integrity of individual cylinders. The program also includes rupture testing to assess the effects of certain classes of damage on overall cylinder strength, aswell as ongoing reviews of specifications, procedures, practices, and inspection results to effect improvements in handling safety, containment integrity, and storage life

Designing computer programs

CERN Document Server

Haigh, Jim

1994-01-01

This is a book for students at every level who are learning to program for the first time - and for the considerable number who learned how to program but were never taught to structure their programs. The author presents a simple set of guidelines that show the programmer how to design in a manageable structure from the outset. The method is suitable for most languages, and is based on the widely used 'JSP' method, to which the student may easily progress if it is needed at a later stage.Most language specific texts contain very little if any information on design, whilst books on des

Intralog Towards an autonomous system for handling inter-terminal container transport

NARCIS (Netherlands)

Spruijt, Adrie; van Duin, Ron; Rieck, Frank

2017-01-01

As part of the National Transition Board Practice Research Raak/SIA program, the INTRALOG (intelligent Truck Application in Logistics) project investigated the practical application of zero emission Automatic Guided Trucks (AGTs) for the transport of containers in the Harbour Industrial Cluster

Aerial Photography and Imagery, Ortho-Corrected, This data set contains imagery from the National Agriculture Imagery Program (NAIP). NAIP acquires digital ortho imagery during the agricultural growing seasons in the continental U.S. NAIP imagery may contain as much as 10% cloud cover per tile. This fil, Published in 2005, 1:63360 (1in=1mile) scale, University of Georgia.

Data.gov (United States)

NSGIC Education | GIS Inventory — Aerial Photography and Imagery, Ortho-Corrected dataset current as of 2005. This data set contains imagery from the National Agriculture Imagery Program (NAIP). NAIP...

Inspection and mitigating measures for life extension of nuclear power plant containment structures

International Nuclear Information System (INIS)

Meyers, B.L.; Daye, M.A.

1989-01-01

The subject of life extension of nuclear power plants has drawn considerable attention during the last few years. Interest in life extension initiated because of both safety and economic reasons. A number of evaluations have been performed. The main thrust of earlier work was directed toward evaluating the factors causing aging, and defining degradation sites, degradation mechanism and failure modes. At present, attention is directed toward establishing the appropriate inspection programs suitable for each of the defined aging sites. Some components and aging sites are already subjected to routine inspection programs such as the surveillance of post-tensioning system and the integrated leak rate test (ILRT) of prestressed concrete and reinforced concrete containments. The aging process affects mechanical, electrical and structural components in all types of containments. This paper addresses the structural components of PWR containments only and presents examples of inspection approaches and describes methods to prevent further degradation of select sites

Containment performance observations and insights of LWRs based on the IPEs

International Nuclear Information System (INIS)

Lehner, J.; Pratt, W.T.; Lane, J.; Chow, E.; Ridgely, J.

1994-01-01

Generic Letter 88-20, open-quotes Individual Plant Examination for Severe Accident Vulnerabilities - 10CFR 50.54(f),close quotes requesting the IPEs, was issued by the NRC on November 23, 1988. U.S. licensee were requested to conduct an Individual Plant Examination (IPE) in order to identify potential severe accident vulnerabilities at their plant and to implement cost-effective plant improvements to reduce or eliminate these vulnerabilities. Supplements to the Generic Letter forwarded technical insights obtained by the NRC staff through its Containment Performance Improvement (CPI) program. These insights were deemed important enough by the staff to bring to the attention of the licensees for use, as they deemed appropriate, in the IPEs which they were preparing. Coupled to their Level 1 results, licensees were requested to report the results of their analyses regarding containment performance. These results included those related to the general methodology used, plant data, plant features, plant damage states, models and methods used in the accident progression analysis, containment failure characterization, containment event trees and their end states, and radionuclide release characterization. At this time, most of the IPEs have been submitted by the licensees. In a follow-up effort to support regulatory activities, the NRC staff with assistance from Brookhaven National Laboratory, has initiated a program involving a global examination of the containment performance results documented in the IPEs. The objective is to identify insights of potential generic safety significance relative to plant design, operation and maintenance, as well as to assess response to the previously forwarded CPI insights

Guide for Operational Configuration Management Program including the adjunct programs of design reconstitution and material condition and aging management

International Nuclear Information System (INIS)

1993-11-01

This standard presents program criteria and implementation guidance for an operational configuration management program for DOE nuclear and non-nuclear facilities in the operational phase. Portions of this standard are also useful for other DOE processes, activities, and programs. This Part 1 contains foreword, glossary, acronyms, bibliography, and Chapter 1 on operational configuration management program principles. Appendices are included on configuration management program interfaces, and background material and concepts for operational configuration management

Reinforced flexural elements for TEMP-STRESS Program

International Nuclear Information System (INIS)

Marchertas, A.H.; Kennedy, J.M.; Pfeiffer, P.A.

1987-06-01

The implementation of reinforced flexural elements into the thermal-mechanical finite element program TEMP-STRESS is described. With explicit temporal integration and dynamic relaxation capabilities in the program, the flexural elements provide an efficient method for the treatment of reinforced structures subjected to transient and static loads. The capability of the computer program is illustrated by the solution of several examples: the simulation of a reinforced concrete beam; simulations of a reinforced concrete containment shell which is subjected to internal pressurization, thermal gradients through the walls, and transient pressure loads. The results of this analysis are relevant in the structural design/safety evaluations of typical reactor containment structures. 22 refs., 13 figs

A GRASP algorithm for the container stowage slot planning problem

DEFF Research Database (Denmark)

Parreno, Francisco; Pacino, Dario; Alvarez-Valdes, Ramon

2016-01-01

in clusters along the vessel. For each of those clusters a specific position for each container must be found. Compared to previous studies, we have introduced two new features: the explicit handling of rolled out containers and the inclusion of separations rules for dangerous cargo. We present a novel......This work presents a generalization of the Slot Planning Problem which raises when the liner shipping industry needs to plan the placement of containers within a vessel (stowage planning). State-of-the-art stowage planning relies on a heuristic decomposition where containers are first distributed...... integer programming formulation and a Greedy Randomized Adaptive Search Procedure (GRASP) to solve the problem. The approach is able to find high-quality solution within 1 s. We also provide comparison with the state-of-the-art on an existing and a new set of benchmark instances. (C) 2016 Elsevier Ltd...

45 CFR 91.18 - Age distinctions contained in HHS regulations.

Science.gov (United States)

2010-10-01

....18 Section 91.18 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION... distinctions contained in a rule or regulation issued by HHS shall be presumed to be necessary to the achievement of a statutory objective of the program or activity to which the rule or regulation applies...

FITS: a function-fitting program

Energy Technology Data Exchange (ETDEWEB)

Balestrini, S.J.; Chezem, C.G.

1982-01-01

FITS is an iterating computer program that adjusts the parameters of a function to fit a set of data points according to the least squares criterion and then lists and plots the results. The function can be programmed or chosen from a library that is provided. The library can be expanded to include up to 99 functions. A general plotting routine, contained in the program but useful in its own right, is described separately in an Appendix.

Ostomy Home Skills Program

Medline Plus

Full Text Available ... ASCRS), American Urological Association (AUA), Certified Enterostomal Therapy Nurses (CETN), and the United Ostomy Associations of America (UOAA). Program Overview The skills kit contains: A booklet with information on the ...

Mississippi Curriculum Framework for Veterinary Technology (Program CIP: 51.0808--Veterinarian Asst./Animal Health). Postsecondary Programs.

Science.gov (United States)

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the veterinary technology program. Presented in the introductory section are a of the program and suggested course sequence. Section I lists baseline competencies, and section II consists of…

Systematic control of large computer programs

International Nuclear Information System (INIS)

Goedbloed, J.P.; Klieb, L.

1986-07-01

A package of CCL, UPDATE, and FORTRAN procedures is described which facilitates the systematic control and development of large scientific computer programs. The package provides a general tool box for this purpose which contains many conveniences for the systematic administration of files, editing, reformating of line printer output files, etc. In addition, a small number of procedures is devoted to the problem of structured development of a large computer program which is used by a group of scientists. The essence of the method is contained in three procedures N, R, and X for the creation of a new UPDATE program library, its revision, and execution, resp., and a procedure REVISE which provides a joint editor - UPDATE session which combines the advantages of the two systems, viz. speed and rigor. (Auth.)

Plant Life Management of the EC6 Concrete Containment Structure

Energy Technology Data Exchange (ETDEWEB)

Abrishami, Homayoun; Ricciuti, Rick; Khan, Azhar [CANDU Energy Inc., Mississauga (Canada)

2012-03-15

Aging of reinforced concrete structures due to service conditions, aggressive environments, or accidents may cause their strength, serviceability and durability to decrease over time. Due to the complex nature of safety-related structures in nuclear power plants in comparison to other structures, they possess a number of characteristics that make them comparison to other structures, they possess a number of characteristics that make them unique. These characteristics are: thick concrete cross-sections, heavy reinforcement, often one-side access only, subjected to such ageing stresses as irradiation and elevated temperature, in addition to other typical ageing mechanisms (i. e., exposure to freeze/thaw cycles, aggressive chemicals, etc.) that typically affects other types of non-nuclear structures. For a new plant, the Plant Life Management Program (PLiM) should start in the design process and then continues through construction, plant operation and decommissioning. Hence PLiM must provide not only Ageing Management program (AMP) but also provide requirements on material characteristic and the design criteria as well. The purpose of this paper is to present the Plant Life Management (PLiM) strategy for the concrete containment structure of EC6 (Enhanced CANDU 6) Nuclear Power Plant designed by CANDU Energy Inc. The EC6 is designed for 100-year plant life including a 60-year operating life and an additional 40-year decommissioning period of time. The approach adopted for the PLiM strategy of the concrete containment structure is a preventive one, key areas being: 1) design methodology, 2) material performance and 3) life cycle management and ageing management program. In addition to strength and serviceability, durability is a major consideration during the design phase, service life and up to the completion of decommissioning. Factors affecting durability design include: a) concrete performance, b) structural application, and c) consideration of environmental

Plant Life Management of the EC6 Concrete Containment Structure

International Nuclear Information System (INIS)

Abrishami, Homayoun; Ricciuti, Rick; Khan, Azhar

2012-01-01

Aging of reinforced concrete structures due to service conditions, aggressive environments, or accidents may cause their strength, serviceability and durability to decrease over time. Due to the complex nature of safety-related structures in nuclear power plants in comparison to other structures, they possess a number of characteristics that make them comparison to other structures, they possess a number of characteristics that make them unique. These characteristics are: thick concrete cross-sections, heavy reinforcement, often one-side access only, subjected to such ageing stresses as irradiation and elevated temperature, in addition to other typical ageing mechanisms (i. e., exposure to freeze/thaw cycles, aggressive chemicals, etc.) that typically affects other types of non-nuclear structures. For a new plant, the Plant Life Management Program (PLiM) should start in the design process and then continues through construction, plant operation and decommissioning. Hence PLiM must provide not only Ageing Management program (AMP) but also provide requirements on material characteristic and the design criteria as well. The purpose of this paper is to present the Plant Life Management (PLiM) strategy for the concrete containment structure of EC6 (Enhanced CANDU 6) Nuclear Power Plant designed by CANDU Energy Inc. The EC6 is designed for 100-year plant life including a 60-year operating life and an additional 40-year decommissioning period of time. The approach adopted for the PLiM strategy of the concrete containment structure is a preventive one, key areas being: 1) design methodology, 2) material performance and 3) life cycle management and ageing management program. In addition to strength and serviceability, durability is a major consideration during the design phase, service life and up to the completion of decommissioning. Factors affecting durability design include: a) concrete performance, b) structural application, and c) consideration of environmental

Buried waste containment system materials. Final Report

International Nuclear Information System (INIS)

Weidner, J.R.; Shaw, P.G.

1997-10-01

This report describes the results of a test program to validate the application of a latex-modified cement formulation for use with the Buried Waste Containment System (BWCS) process during a proof of principle (POP) demonstration. The test program included three objectives. One objective was to validate the barrier material mix formulation to be used with the BWCS equipment. A basic mix formula for initial trials was supplied by the cement and latex vendors. The suitability of the material for BWCS application was verified by laboratory testing at the Idaho National Engineering and Environmental Laboratory (INEEL). A second objective was to determine if the POP BWCS material emplacement process adversely affected the barrier material properties. This objective was met by measuring and comparing properties of material prepared in the INEEL Materials Testing Laboratory (MTL) with identical properties of material produced by the BWCS field tests. These measurements included hydraulic conductivity to determine if the material met the US Environmental Protection Agency (EPA) requirements for barriers used for hazardous waste sites, petrographic analysis to allow an assessment of barrier material separation and segregation during emplacement, and a set of mechanical property tests typical of concrete characterization. The third objective was to measure the hydraulic properties of barrier material containing a stop-start joint to determine if such a feature would meet the EPA requirements for hazardous waste site barriers

Programed Instruction in Health Education and Physical Education.

Science.gov (United States)

Mayshark, Cyrus; Evaul, Thomas W.

This book contains eight chapters by several different authors, most of them professors of health or physical education. Focus is on applications and implications of programed instruction for professionals in the health and physical education fields. "Overview of Programed Instruction" defines programing, its development and implications for…

Successful Physical Activity Programming for Students with Autism.

Science.gov (United States)

Schultheis, Susan F.; Boswell, Boni B.; Decker, Jim

2000-01-01

This article describes Success in Physical Activity, a program for students with autism. The program, based on adaptations of the Treatment and Education of Autistic and Related Communications-Handicapped Children (TEACCH) recreational structure program, focuses on two areas: physical fitness and motor ability. (Contains seven references.)…

Disposal demonstration of a high integrity container (HIC) containing an EPICOR-II prefilter from Three Mile Island

International Nuclear Information System (INIS)

McConnell, J.W. Jr.; Tyacke, M.J.; Schmitt, R.C.; Reno, H.W.

1985-02-01

A high integrity container (HIC) was developed, tested, and certified for use in disposing of unusual low-level radioactive waste from Three Mile Island Unit 2 (TMI-2). The work was coordinated by EG and G Idaho, Inc. and funded by the US Department of Energy. A disposal demonstration using an HIC containing an EPICOR-II prefilter from TMI-2 was completed at the commercial disposal facility in the State of Washington. A Certification of Compliance was issued by the Department of Social and Health Services of the State of Washington to use the HIC in disposing of up to 50 EPICOR-II prefilters. That Certification of Compliance was issued after rigorous review of the HIC design and test program by the State and by the US Nuclear Regulatory Commission. This report describes the processes of loading, transporting, and disposing of the demonstration HIC and briefly describes the design, testing, and approval effort leading up to the demonstration

Program Transformation to Identify List-Based Parallel Skeletons

Directory of Open Access Journals (Sweden)

Venkatesh Kannan

2016-07-01

Full Text Available Algorithmic skeletons are used as building-blocks to ease the task of parallel programming by abstracting the details of parallel implementation from the developer. Most existing libraries provide implementations of skeletons that are defined over flat data types such as lists or arrays. However, skeleton-based parallel programming is still very challenging as it requires intricate analysis of the underlying algorithm and often uses inefficient intermediate data structures. Further, the algorithmic structure of a given program may not match those of list-based skeletons. In this paper, we present a method to automatically transform any given program to one that is defined over a list and is more likely to contain instances of list-based skeletons. This facilitates the parallel execution of a transformed program using existing implementations of list-based parallel skeletons. Further, by using an existing transformation called distillation in conjunction with our method, we produce transformed programs that contain fewer inefficient intermediate data structures.

RAMA Containment group final report January 1985

International Nuclear Information System (INIS)

Becker, K.

1985-01-01

In the present investigation the MAAP (Modular Accident Analysis Program) program, which was developed by FAI, has been employed to analyse the containment response to severe reactor accidents involving core meltdown and vessel failure. All of the twelve Swedish reactors, 9 BWRs and 3 PWRs, have been included in the study. In order to apply the MAAP code to the BWRs it was necessary to develop five new versions of the code. This development was carried out by FAI (Fauske and Associates Inc.). For the important cases of total blackout and LOCAs the MAAP code seems to give a reasonable description of the accident progressions, and the predicted times to containment failure were approximately 2 days for all of the plants. With regard to the more complicated cases, which for instance include starts and stops of emergency cooling systems, only a limited number of cases have been studied. The experience from this analysis is that certain sequences can be analysed with MAAP, but that further development of the code is necessary in order to cover all cases of interest for accident management analysis. Thus, our versions of the MAAP code still need improvements and very qualified personnel are, in fact, needed in order too interpret the results properly. It was found that the early design of Swedish BWRs with a wetwell below the reactor vessel was a favourable one from the severe accident point of view. With regard to the newer designs, F1, F2, F3 and O3, which have a dry pedestal compartment below the reactor vessel, it was suggested that before a possible reactor vessel failure this compartment should be flooded by water in order to avoid an early rupture of the containment. (author)

ICECON: a computer program used to calculate containment back pressure for LOCA analysis (including ice condenser plants)

International Nuclear Information System (INIS)

1976-07-01

The ICECON computer code provides a method for conservatively calculating the long term back pressure transient in the containment resulting from a hypothetical Loss-of-Coolant Accident (LOCA) for PWR plants including ice condenser containment systems. The ICECON computer code was developed from the CONTEMPT/LT-022 code. A brief discussion of the salient features of a typical ice condenser containment is presented. Details of the ice condenser models are explained. The corrections and improvements made to CONTEMPT/LT-022 are included. The organization of the code, including the calculational procedure, is outlined. The user's manual, to be used in conjunction with the CONTEMPT/LT-022 user's manual, a sample problem, a time-step study (solution convergence) and a comparison of ICECON results with the results of the NSSS vendor are presented. In general, containment pressure calculated with the ICECON code agree with those calculated by the NSSS vendor using the same mass and energy release rates to the containment

The structural integrity of high level waste containers for deep disposal

International Nuclear Information System (INIS)

Keer, T.J.; Martindale, N.J.; Haijtink, B.

1990-01-01

Most countries with a nuclear power program are developing plans to dispose of high level waste in deep geological repositories. These facilities are typically in the range 500-1000m below ground. Although long term safety analyses mainly rely on the isolation function of the geological barrier, for the medium term (between 500 and 1000 years) a barrier such as a container (overpack) may play an important role. This paper addresses the mechanical/structural behavior of these structures under extreme geological pressures. The work described in the paper was conducted within the COMPAS project (Container Mechanical Performance Assessment) funded by the Commission of the European Communities and the United Kingdom Department of the Environment. The work was aimed at predicting the modes of failure and failure pressures which characterize the heavy, thick walled mild steel containers which might be considered for the disposal of vitrified waste. The work involved a considerable amount of analytical work, using 3-D non-linear finite element techniques, coupled with a large parallel program of experimental work. The experimental work consisted of a number of scale model tests in which the response of the containers was examined under external pressures as high as 120MPa. Extensive strain-gauge instrumentation was used to record the behavior of the models as they were driven to collapse. A number of comparative computer calculations were carried out by organizations from various European countries. Correlations were established between experimental and analytical data and guidelines regarding the choice of suitable software were established. The work concluded with a full 3-D simulation of the behavior of a container under long-term disposal conditions. In this analysis, non-linearities due to geological effects and material/geometry effects in the container were properly accounted for. 6 refs., 9 figs., 4 tabs

Historical volcanic eruptions in the Canary Islands, tephra composition, and insights into the crystal cargo of basaltic magmas

Science.gov (United States)

Longpre, M. A.; Muller, J.; Beaudry, P.; Andronikides, A.; Felpeto, A.

2017-12-01

Since the 16th century, at least 13 volcanic eruptions have occurred in the Canary Islands that formed monogenetic cinder cones and lava flow fields: 2 on Lanzarote, 4 on Tenerife, 6 on La Palma, and 1 on the submarine flank of El Hierro. Here we present a comprehensive new dataset of tephra composition for all 13 eruptions, comprising major and trace element data for bulk rocks and matrix glasses, as well as vesicularity and crystallinity measurements. In addition, we compile available volcanological and petrological information for specific eruptions, including estimates of lava flow area and volume. All lapilli samples show a vesicularity of 40-50 vol% and a vesicle-free crystallinity (crystals ≥ 250 µm) of 5-15 vol%. Modal mineralogy varies significantly between samples, typically consisting of olivine ± clinopyroxene ± Fe-Ti oxide ± plagioclase ± amphibole in different proportions. All but 2 tephras have basanite-tephrite bulk rock compositions. Lapilli from vents of the AD 1730-1736 Timanfaya eruption, Lanzarote, largely are basaltic, whereas the AD 1798 Chahorra eruption, Tenerife, produced phonotephrite tephra. These results are in agreement with published bulk lava flow data. Unsurprisingly, glass compositions are more evolved than bulk rocks and MgOglass is weakly positively correlated to MgObulk (MgOglass = 0.30*MgObulk + 2.11, R2 = 0.54). Both bulk rocks and glasses show strikingly similar multi-element diagram patterns, with strong enrichment relative to the bulk-silicate Earth and marked positive Nb and Ta and negative Pb anomalies — typical for ocean island basalts. Glass/bulk rock elemental ratios reveal systematic differences between samples that relate to their mineralogy; for example, Lanzarote tephras that lack significant clinopyroxene and Fe-Ti oxide crystals have higher Scglass/Scbulk and Vglass/Vbulk than Tenerife, La Palma and El Hierro samples that typically contain these minerals. Among all elements, K and P display the greatest

A review on leakage rate tests for containment isolation systems

International Nuclear Information System (INIS)

Kim, In Goo; Kim, Hho Jung

1992-01-01

Wide experiences in operating containment isolation systems have been accumulated in Korea since 1978. Hence, it becomes necessary to review the operating data in order to confirm the integrity of containments with about 50 reactor-years of experience and to establish the future direction to the containment test program. The objectives of present work are to collect, consolidate and assess the leakage rate data, and then to find out dominant leakage paths and factors affecting integrated leakage rate test. General trends of overall leakage show that more careful surveillance during pre-operational test can reduce the containment leakage. Dominant leakage paths are found to be through air locks and large-sized valves, such as butterfly valves of purge lines, so that weighted surveillance and inspection on these dominant leakage paths can considerably reduce the containment leakage. The atmosphere stabilization are found to be the most important to obtain the reliable result. In order to get well stabilized atmosphere, temperature and flow rate of compressed air should be kept constant and it is preferable not to operate fan cooler during pressurizing the containment for test

Population structure of the banana weevil, an introduced pest in the Canary Islands, studied by RAPD analysis.

Science.gov (United States)

Magaña, C; Beroiz, B; Hernández-Crespo, P; Montes de Oca, M; Carnero, A; Ortego, F; Castañera, P

2007-12-01

The banana weevil (BW), Cosmopolites sordidus (Coleoptera: Curculionidae), is one of the most important insect pests of bananas and plantains. The mobility and the origin of BW infestations at the Canary Islands (Tenerife, La Gomera and La Palma) have been analysed using Random Amplified Polymorphic DNA (RAPD) as molecular markers. Populations from Costa Rica, Colombia, Uganda and Madeira were also included for comparison. One hundred and fifteen reproducible bands from eight primers were obtained. The level of polymorphism in the populations from the Canary Islands (40-62%) was in the range of those found in other populations. Nei's genetic distances, pair-wise fixation index (FST) values indicate that the closest populations are Tenerife populations among themselves (Nei's genetic distance=0.054-0.100; FST=0.091-0.157) and Costa Rica and Colombia populations (Nei's genetic distance=0.049; FST=0.113). Our results indicate the existence of BW local biotypes with limited gene flow and affected by genetic drift. These results are compatible with a unique event of colonization at Tenerife; whereas, the outbreaks in La Gomera and La Palma may come from independent introductions. The Madeira population is phylogenetically and geographically closer to the Canary Islands populations, suggesting that it is the most likely source of the insects introduced in the Canary Islands.

Evaluating Dermatology Residency Program Websites.

Science.gov (United States)

Ashack, Kurt A; Burton, Kyle A; Soh, Jonathan M; Lanoue, Julien; Boyd, Anne H; Milford, Emily E; Dunnick, Cory; Dellavalle, Robert P

2016-03-16

Internet resources play an important role in how medical students access information related to residency programs.Evaluating program websites is necessary in order to provide accurate information for applicants and provide information regarding areas of website improvement for programs. To date, dermatology residency websites (D  WS) have not been evaluated.This paper evaluates dermatology residency websites based on availability of predefined measures. Using the FREIDA (Fellowship and Residency Electronic Interactive Database) Online database, authors searched forall accredited dermatology program websites. Eligible programs were identified through the FREIDA Online database and had a functioning website. Two authors independently extracted data with consensus or third researcher resolution of differences. This data was accessed and archived from July 15th to July 17th, 2015.Primary outcomes measured were presence of content on education, resident and faculty information, program environment, applicant recruitment, schedule, salary, and website quality evaluated using an online tool (WooRank.com). Out of 117 accredited dermatology residencies, 115 had functioning webpages. Of these, 76.5% (75) had direct links found on the FRIEDA Online database. Most programs contained information on education, faculty, program environment, and applicant recruitment. However, website quality and marketing effectiveness were highly variable; most programs were deemed to need improvements in the functioning of their webpages. Also, additional information on current residents and about potential away rotations were lacking from most websites with only 52.2% (60) and 41.7% (48) of programs providing this content, respectively. A majority of dermatology residency websites contained adequate information on many of the factors we evaluated. However, many were lacking in areas that matter to applicants. We hope this report will encourage dermatology residencyprograms

Disease management: findings from leading state programs.

Science.gov (United States)

Wheatley, Ben

2002-12-01

Disease management programs are designed to contain costs by improving health among the chronically ill. More than 20 states are now engaged in developing and implementing Medicaid disease management programs for their primary care case management and fee-for-service populations.

Validation of the RALOC-mod.4 thermal-hydraulics code on evaporation transients in the Phebus containment

International Nuclear Information System (INIS)

Spitz, P.B.; Lemoine, F.; Tirini, S.

1997-01-01

IPSN (Nuclear Protection and Safety Institute) and GRS (Gesellschaft fur Anlagen und Reaktorsicherheit Schwertnergasse 1) are developing the ESCADRE-ASTEC systems of codes devoted to the prediction of the behaviour of water-cooled reactors during a severe accident. The RALOC-mod 4 code belongs to this system and is specifically devoted to containment thermal-hydraulics studies. IPSN has designed a Thermal Hydraulic Containment Test Program in support to the Phebus Fission Product Test Program/2/. Evaporation tests have been recently performed in the Phebus containment test facility. The objective of this work is to assess against these tests the capability of the RALOC -mod 4 code to capture the phenomena observed in these experiments and more particularly the evaporation heat transfer and wall heat transfers. (DM)

Kuosheng Mark III containment analyses using GOTHIC

Energy Technology Data Exchange (ETDEWEB)

Lin, Ansheng, E-mail: samuellin1999@iner.gov.tw; Chen, Yen-Shu; Yuann, Yng-Ruey

2013-10-15

Highlights: • The Kuosheng Mark III containment model is established using GOTHIC. • Containment pressure and temperature responses due to LOCA are presented. • The calculated results are all below the design values and compared with the FSAR results. • The calculated results can be served as an analysis reference for an SPU project in the future. -- Abstract: Kuosheng nuclear power plant in Taiwan is a twin-unit BWR/6 plant, and both units utilize the Mark III containment. Currently, the plant is performing a stretch power uprate (SPU) project to increase the core thermal power to 103.7% OLTP (original licensed thermal power). However, the containment response in the Kuosheng Final Safety Analysis Report (FSAR) was completed more than twenty-five years ago. The purpose of this study is to establish a Kuosheng Mark III containment model using the containment program GOTHIC. The containment pressure and temperature responses under the design-basis accidents, which are the main steam line break (MSLB) and the recirculation line break (RCLB) accidents, are investigated. Short-term and long-term analyses are presented in this study. The short-term analysis is to calculate the drywell peak pressure and temperature which happen in the early stage of the LOCAs. The long-term analysis is to calculate the peak pressure and temperature of the reactor building space. In the short-term analysis, the calculated peak drywell to wetwell differential pressure is 140.6 kPa for the MSLB, which is below than the design value of 189.6 kPa. The calculated peak drywell temperature is 158 °C, which is still below the design value of 165.6 °C. In addition, in the long-term analysis, the calculated peak containment pressure is 47 kPa G, which is below the design value of 103.4 kPa G. The calculated peak values of containment temperatures are 74.7 °C, which is lower than the design value of 93.3 °C. Therefore, the Kuosheng Mark III containment can maintain the integrity after

Savannah River Site environmental report for 1991. [Contains Glossary

Energy Technology Data Exchange (ETDEWEB)

Arnett, M.W.; Karapatakis, L.K.; Mamatey, A.R.; Todd, J.L.

1991-01-01

This report describes environmental activities conducted on and in the vicinity of the Savannah River Site (SRS) in Aiken, S.C., from Jan. 1 to Dec. 31, 1991, with an update on compliance activities through April 1, 1992. The report is a single volume with a separate summary pamphlet highlighting the major findings for 1991. The report is divided into an executive summary and 14 chapters containing information on environmental compliance issues, environmental monitoring methods and programs, and environmental research activities for 1991, as well as historical data from previous years. Analytical results, figures, charts, and data tables relevant to the environmental monitoring program for 1991 at SRS are included.

Monitoring quiescent volcanoes by diffuse He degassing: case study Teide volcano

Science.gov (United States)

Pérez, Nemesio M.; Melián, Gladys; Asensio-Ramos, María; Padrón, Eleazar; Hernández, Pedro A.; Barrancos, José; Padilla, Germán; Rodríguez, Fátima; Calvo, David; Alonso, Mar

2016-04-01

Tenerife (2,034 km2), the largest of the Canary Islands, is the only island that has developed a central volcanic complex (Teide-Pico Viejo stratovolcanoes), characterized by the eruption of differentiated magmas. This central volcanic complex has been built in the intersection of the three major volcanic rift-zones of Tenerife, where most of the historical volcanic activity has taken place. The existence of a volcanic-hydrothermal system beneath Teide volcano is suggested by the occurrence of a weak fumarolic system, steamy ground and high rates of diffuse CO2 degassing all around the summit cone of Teide (Pérez et al., 2013). Diffuse emission studies of non-reactive and/or highly mobile gases such as helium have recently provided promising results to detect changes in the magmatic gas component at surface related to volcanic unrest episodes (Padrón et al., 2013). The geochemical properties of He minimize the interaction of this noble gas on its movement toward the earth's surface, and its isotopic composition is not affected by subsequent chemical reactions. It is highly mobile, chemically inert, physically stable, non-biogenic, sparingly soluble in water under ambient conditions, almost non-adsorbable, and highly diffusive with a diffusion coefficient ˜10 times that of CO2. As part of the geochemical monitoring program for the volcanic surveillance of Teide volcano, yearly surveys of diffuse He emission through the surface of the summit cone of Teide volcano have been performed since 2006. Soil He emission rate was measured yearly at ˜130 sampling sites selected in the surface environment of the summit cone of Teide volcano (Tenerife, Canary Islands), covering an area of ˜0.5 km2, assuming that He emission is governed by convection and diffusion. The distribution of the sampling sites was carefully chosen to homogeneously cover the target area, allowing the computation of the total He emission by sequential Gaussian simulation (sGs). Nine surveys have been