WorldWideScience

Sample records for contact stresses investigation

  1. Development of steel head joints with fiberglass sucker rod on the base of contact stresses investigation

    Energy Technology Data Exchange (ETDEWEB)

    Kopey, B.V.; Kopey, L.B. [Ivano-Frankivsk State Technical Oil and Gas University (Ukraine); Maksymuk, A.V.; Shcherbyna, N.M. [National Ukrainian Academy of Sciences (Ukraine)

    1998-12-31

    The methods of calculation of contact stresses during cylinder shell tube - steel bandage interaction are presented. Tymoshenko`s generalized theory of shells serves as a basis for investigating steel head to fiberglass sucker rod joint strength. This theory allows to consider mechanical performance of composite materials. The problem is reduced to solving Fredholm integral equation of second degree. The numeric analysis is performed. Several joints of composite body with steel head are proposed. The full-size sucker rod fatigue tests are performed to determine the fatigue limit under the bending and axial cyclic loads in the medium of oil well fluids. (orig.)

  2. Contact stress sensor

    Science.gov (United States)

    Kotovsky, Jack [Oakland, CA

    2012-02-07

    A contact stress sensor includes one or more MEMS fabricated sensor elements, where each sensor element of includes a thin non-recessed portion, a recessed portion and a pressure sensitive element adjacent to the recessed portion. An electric circuit is connected to the pressure sensitive element. The circuit includes a thermal compensator and a pressure signal circuit element configured to provide a signal upon movement of the pressure sensitive element.

  3. Mechanical properties of cork under contact stresses

    International Nuclear Information System (INIS)

    Parralejo, A. D.; Guiberteau, F.; Fortes, M. A.; Rosa, M. E.

    2001-01-01

    In this work our interest is focussed on the mechanical behaviour of natural cork under contact stresses. Many of the applications of this curious material are related with its mechanical response under such a stress field, however this topic has not been still sufficiently considered in the scientific literature. For this purpose, we proposed the use of Hertzian indentation tests. By using this mythology we have investigated the cork structure influence on the corresponding mechanical properties. Our results reveal a clear mechanical anisotropy effect. Moreover, the elastic modulus corresponding to specific directions have been estimated. Several are the main advantages of this specific test mythology versus traditional uniaxial compression tests, specially simplicity and local character. (Author) 9 refs

  4. Contact interactions, stress and material symmetry

    Directory of Open Access Journals (Sweden)

    Podio-Guidugli P.

    2002-01-01

    Full Text Available An argument is given intimating that, for nonsimple materials, the concepts of contact interaction and material symmetry, as well as the bridging concept of stress, should be carefully revised and generalized. .

  5. Contact Stress Design Parameters for Titanium Bearings, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Air-Lock's Phase I effort tested the effects of ball induced contact stresses on Titanium bearing races. The contact stress design limit that would achieve a...

  6. Contact mechanical analysis of O-ring stresses

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyung Kyu

    2007-02-15

    The purpose of this project is to develop the approximate solutions of contact traction and internal stress of an O-ring by using a two dimensional elasticity for enhancing the design and failure prediction technology. Investigated were the applicability of Lindley's formulae of contact force prediction and the Hertz theory. Three cases of O-ring installation were considered. The approximate solution of contact tractions and internal stresses of each case were derived. The key results are summarized as follows: 1. It is verified that Lindley's formulae predicts the relationship between the fractional compression and contact force. 2. In the case of Case I, II and III without internal pressure, it is found that a function form of the contact traction is the Hertzian. So it is possible to express the traction with a Hertzian form and correction factors. 3. The internal stresses are derived in the case of the Hertzian traction profile. The stresses at the center of O-ring show a satisfactory result when compared with the finite element result.

  7. Computational stress and damage modelling for rolling contact fatigue

    DEFF Research Database (Denmark)

    Cerullo, Michele

    Rolling contact fatigue in radial roller bearings is studied by means of a 2D plane strain nite element program. The Dang Van multiaxial fatigue criterion is firstly used, in a macroscopic study modeling the bearing raceway, to investigate the region where fatigue cracks are more likely to nucleate...... and of compressive residual stresses are also analyzed. The stress history of a material point at the depth where the maximum Dang Van damage factor is reached is then recorded and used in a subsequent micro-mechanical analysis. The stress history is applied as periodic boundary conditions in a representative volume...

  8. Allergic Contact Dermatitis Is Associated with Significant Oxidative Stress

    Directory of Open Access Journals (Sweden)

    S. Kaur

    2014-01-01

    Full Text Available Background. Research has confirmed the involvement of oxidative stress (OxS in allergic contact dermatitis whilst other inflammation-related biomarkers have been less studied. Objective. To evaluate systemic levels of selected inflammatory markers, OxS indices and adipokines as well as their associations in allergic contact dermatitis. Methods. In 40 patients, interleukin- (IL- 6, monocyte chemoattractant protein (MCP-1, and IL-10 levels were measured in sera with the Evidence Investigator Cytokine & Growth factors High-Sensitivity Array, total peroxide concentration (TPX and total antioxidant capacity (TAC by means of spectrophotometry, and the plasma concentrations of adiponectin and leptin by the quantitative sandwich enzyme immunoassay technique. Results. TNF-α level (P < 0.01 and TPX (P < 0.0001 were increased whilst IL-10 (P < 0.05 and TAC (P < 0.0001 were decreased in the patients as compared to controls. Correlation and multiple linear regression analysis identified both, TPX and TAC (inversely, as possible independent markers for evaluating allergic contact dermatitis. Adiponectin level in patients was increased (P < 0.0001, but neither adiponectin nor leptin correlated significantly with the biomarkers of inflammation or OxS. Conclusion. OxS parameters, especially TPX and OSI, reflect the degree of systemic inflammation associated with allergic contact dermatitis in the best way. The relation between OxS and adiponectin level warrants further studies.

  9. Rock stress investigations

    International Nuclear Information System (INIS)

    Pahl, A.; Heusermann, St.; Braeuer, V.; Gloeggler, W.

    1989-04-01

    On the research project 'Rock Stress Mesurements' the BGR has developed and tested several methods for use in boreholes at a depth of 200 m. Indirect stress measurements using overcoring methods with BGR-probes and CSIR-triaxial cells as well as direct stress measurements using the hydraulic-fracturing method were made. To determine in-situ rock deformation behavior borehole deformation tests, using a BGR-dilatometer, were performed. Two types of the BGR-probe were applied: a four-component-probe to determine horizontal stresses and a five-component-probe to determine a quasi three-dimensional stress field. The first time a computer for data processing was installed in the borehole together with the BGR-probe. Laboratory tests on low cylinders were made to study the stress-deformation behavior. To validate and to interprete the measurement results some test methods were modelled using the finite-element method. The dilatometer-tests yielded high values of Young's modulus, whereas laboratory tests showed lower values with a distinct deformation anisotropy. Stress measurements with the BGR-probe yielded horizontal stresses being higher than the theoretical overburden pressure. These results are comparable to the results of the hydraulic fracturing tests, whereas stresses obtained with CSIR-triaxial cells are lower. The detailed geological mapping of the borehole indicated relationships between stress and geology. With regard to borehole depth different zones of rock structure joint frequency, joint orientation, and orientation of microfissures as well as stress magnitude, stress direction, and degree of deformation anisotropy could be distinguished. (author) 4 tabs., 76 figs., 31 refs

  10. A method to investigate the biomechanical alterations in Perthes’ disease by hip joint contact modeling

    DEFF Research Database (Denmark)

    Salmingo, Remel A.; Skytte, Tina Lercke; Traberg, Marie Sand

    2017-01-01

    for the preoperative planning to obtain stress relief for the highly stressed areas in the malformed hip. This single-patient study demonstrated that the biomechanical alterations in Perthes’ disease can be evaluated individually by patient-specific finite element contact modeling using MRI. A multi-patient study...... was to develop a method to investigate the biomechanical alterations in Perthes’ disease by finite element (FE ) contact modeling using MRI. The MRI data of a unilateral Perthes’ case was obtained to develop the three-dimensional FE model of the hip joint. The stress and contact pressure patterns...... in the unaffected hip were well distrib uted. Elevated concentrations of stress and contact pressure were found in the Perthes’ hip. The highest femoral cartilagev on Mises stress 3.9 MPa and contact pressure 5.3 M P a were found in the Perthes’ hip, whereas 2.4 M P a and 4.9 MP a in the healthy hip, respectively...

  11. Contact stress analysis of involute spur gear by Finite Element ...

    African Journals Online (AJOL)

    In this paper the contact stress in rolling-sliding contact of involute spur gear and the effect of coefficient of friction was analyzed. To achieve this, first, three dimensional involute spur gear pairs were developed in Solid works 2012 Premium and the 3D model was exported to ANSYS workbench 14.5. Next, the analysis was ...

  12. Evaluation of Tire/Surfacing/Base Contact Stresses and Texture Depth

    Directory of Open Access Journals (Sweden)

    W.J.vdM. Steyn

    2015-03-01

    Full Text Available Tire rolling resistance has a major impact on vehicle fuel consumption. Rolling resistance is the loss of energy due to the interaction between the tire and the pavement surface. This interaction is a complicated combination of stresses and strains which depend on both tire and pavement related factors. These include vehicle speed, vehicle weight, tire material and type, road camber, tire inflation pressure, pavement surfacing texture etc. In this paper the relationship between pavement surface texture depth and tire/surfacing contact stress and area is investigated. Texture depth and tire/surfacing contact stress were measured for a range of tire inflation pressures on five different pavement surfaces. In the analysis the relationship between texture and the generated contact stresses as well as the contact stress between the surfacing and base layer are presented and discussed, and the anticipated effect of these relationships on the rolling resistance of vehicles on the surfacings, and subsequent vehicle fuel economy discussed.

  13. Approximate stresses in 2-D flat elastic contact fretting problems

    Science.gov (United States)

    Urban, Michael Rene

    Fatigue results from the cyclic loading of a solid body. If the body subject to fatigue is in contact with another body and relative sliding motion occurs between these two bodies, then rubbing surface damage can accelerate fatigue failure. The acceleration of fatigue failure is especially important if the relative motion between the two bodies results in surface damage without excessive surface removal via wear. The situation just described is referred to as fretting fatigue. Understanding of fretting fatigue is greatly enhanced if the stress state associated with fretting can be characterized. For Hertzian contact, this can readily be done. Unfortunately, simple stress formulae are not available for flat body contact. The primary result of the present research is the development of a new, reasonably accurate, approximate closed form expression for 2-dimensional contact stresses which has been verified using finite element modeling. This expression is also combined with fracture mechanics to provide a simple method of determining when a crack is long enough to no longer be affected by the contact stress field. Lower bounds on fatigue life can then easily be calculated using fracture mechanics. This closed form expression can also be used to calculate crack propagation within the contact stress field. The problem of determining the cycles required to generate an initial crack and what to choose as an initial crack size is unresolved as it is in non-fretting fatigue.

  14. The influence of rail surface irregularities on contact forces and local stresses

    Science.gov (United States)

    Andersson, Robin; Torstensson, Peter T.; Kabo, Elena; Larsson, Fredrik

    2015-01-01

    The effect of initial rail surface irregularities on promoting further surface degradation is investigated. The study concerns rolling contact fatigue formation, in particular in the form of the so-called squats. The impact of surface irregularities in the form of dimples is quantified by peak magnitudes of dynamic contact stresses and contact forces. To this end simulations of two-dimensional (later extended to three-dimensional) vertical dynamic vehicle-track interaction are employed. The most influencing parameters are identified. It is shown that even very shallow dimples might have a large impact on local contact stresses. Peak magnitudes of contact forces and stresses due to the influence of rail dimples are shown to exceed those due to rail corrugation.

  15. Growth of contact area between rough surfaces under normal stress

    Science.gov (United States)

    Stesky, R. M.; Hannan, S. S.

    1987-05-01

    The contact area between deforming rough surfaces in marble, alabaster, and quartz was measured from thin sections of surfaces bonded under load with low viscosity resin epoxy. The marble and alabaster samples had contact areas that increased with stress at an accelerating rate. This result suggests that the strength of the asperity contacts decreased progressively during the deformation, following some form of strain weakening relationship. This conclusion is supported by petrographic observation of the thin sections that indicate that much of the deformation was cataclastic, with minor twinning of calcite and kinking of gypsum. In the case of the quartz, the observed contact area was small and increased approximately linearly with normal stress. Only the irreversible cataclastic deformation was observed; however strain-induced birefringence and cracking of the epoxy, not observed with the other rocks, suggests that significant elastic deformation occurred, but recovered during unloading.

  16. Health sciences librarians, patient contact, and secondary traumatic stress.

    Science.gov (United States)

    Becker, Rachel W; McCrillis, Aileen

    2015-04-01

    The purpose of this study was to determine the prevalence of secondary traumatic stress (STS) in health sciences librarians (HSLs) who have direct contact with traumatized individuals and their families. A twenty-five-item survey and the Secondary Traumatic Stress Scale (STSS) were distributed via email to three Medical Library Association email discussion lists. A total of fifty-five HSLs responded to the survey. Survey results indicate moderate levels of STS and variability of symptoms among participants. Library and employee assistance program managers should be aware of the emotional toll of patient and/or family contact for HSLs.

  17. Contact stresses by rounded punch subject to axial and transverse shear

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyung Kyu [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1999-05-01

    Contact shear stresses by rounded punch were evaluated numerically. Numerical program was successfully implemented by using an influence function method. To simulate the physical fretting problem, a closed load path of shear was considered. The influence functions on surface displacements fo both axial and transverse direction were calculated using a triangular shear traction element. Behaviour of the contact surface, such as stick and slip region during the load path was investigated together with compliance change. Irreversibility of the shear stress was shown. The importance and the utilization of the present research were discussed for analyzing the material failure induced by contact such as fretting wear and fatigue.

  18. Contact stresses by rounded punch subject to axial and transverse shear

    International Nuclear Information System (INIS)

    Kim, Hyung Kyu

    1999-01-01

    Contact shear stresses by rounded punch were evaluated numerically. Numerical program was successfully implemented by using an influence function method. To simulate the physical fretting problem, a closed load path of shear was considered. The influence functions on surface displacements fo both axial and transverse direction were calculated using a triangular shear traction element. Behaviour of the contact surface, such as stick and slip region during the load path was investigated together with compliance change. Irreversibility of the shear stress was shown. The importance and the utilization of the present research were discussed for analyzing the material failure induced by contact such as fretting wear and fatigue

  19. Assessment on the methods of measuring the tyre-road contact patch stresses

    Science.gov (United States)

    Anghelache, G.; Moisescu, A.-R.; Buretea, D.

    2017-08-01

    The paper reviews established and modern methods for investigating tri-axial stress distributions in the tyre-road contact patch. The authors used three methods of measuring stress distributions: strain gauge method; force sensing technique; acceleration measurements. Four prototypes of instrumented pins transducers involving mentioned measuring methods were developed. Data acquisitions of the contact patch stresses distributions were performed using each transducer with instrumented pin. The results are analysed and compared, underlining the advantages and drawbacks of each method. The experimental results indicate that the three methods are valuable.

  20. Contact Stress Generation on the UHMWPE Tibial Insert

    Directory of Open Access Journals (Sweden)

    S. Petrović Savić

    2014-12-01

    Full Text Available Total knee replacement (TKR is considered, during last years, as a very successful surgical technique for removing knee joint deformities and eliminating pain caused by cartilage damage. In literature, as primary causes for knee joint endoprothesis damage are cited complex movements which cause occurrences of complex stress conditions, sagital radius conformity, sliding, types of materials etc. Aim of this study is analysis of contact stresses that occur on tibial implant for 15°, 45° and 60° knee flexion and 50 kg, 75 kg, 100 kg and 125 kg weight. Knee joint prosthesis model and finite elements method (FEM analysis are done in software Catia V5. For this analysis we used ultra-high molecular weight polyethylene (UHMWPE for tibial implant material and AISI 316, AISI 317, AISI 321, 17-4PH, CoCrMo, Ti6Al4V and SAE A-286 for femoral component materials. Results show that area of maximal contact stress is identified in medial and lateral part of tibial implant. Von Mises stress values vary regarding of flexion degree and weight, but values are approximate for types of chosen materials. Contact stress location corresponds to damage that occur on tibial implant during exploitation.

  1. Experimental investigation on the electrical contact behavior of rolling contact connector

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Junxing; Yang, Fei, E-mail: yfei2007@mail.xjtu.edu.cn; Luo, Kaiyu; Zhu, Mingliang; Wu, Yi; Rong, Mingzhe [State Key Laboratory of Electrical Insulation and Power Equipment, Xi’an Jiaotong University, Xi’an 710049 (China)

    2015-12-15

    Rolling contact connector (RCC) is a new technology utilized in high performance electric power transfer systems with one or more rotating interfaces, such as radars, satellites, wind generators, and medical computed tomography machines. Rolling contact components are used in the RCC instead of traditional sliding contacts to transfer electrical power and/or signal. Since the requirement of the power transmission is increasing in these years, the rolling electrical contact characteristics become more and more important for the long-life design of RCC. In this paper, a typical form of RCC is presented. A series of experimental work are carried out to investigate the rolling electrical contact characteristics during its lifetime. The influence of a variety of factors on the electrical contact degradation behavior of RCC is analyzed under both vacuum and air environment. Based on the surface morphology and elemental composition changes in the contact zone, which are assessed by field emission scanning electron microscope and confocal laser scanning microscope, the mechanism of rolling electrical contact degradation is discussed.

  2. CONSIDERATIONS UPON CONTACT STRESS MODELLING IN DENTAL ARTICULATOR PAIRS

    Directory of Open Access Journals (Sweden)

    Carmen Ciornei

    2012-05-01

    Full Text Available A dental articulator is a mechanism which simulates the temporo-mandibular joint. The articulator is essential as it replicates the basic motions of the upper and lower mandibles, both revolve and translational motions. In the present paper the stresses from an articulator TMJ modelled as a bronze sphere into a cylindrical steel cavity are analyzed by two methods, first applying the Hertzian contact theory and then numerically, by means of finite element analysis using the simulation module in CATIA.

  3. The Mathematical and Computer Aided Analysis of the Contact Stress of the Surface With 4th Order

    Science.gov (United States)

    Huran, Liu

    Inspired from some gears with heavy power transmission in practical usage after serious plastic deformation in metallurgical industry, we believe that there must existed some kind of gear profile which is most suitable in both the contact and bending fatigue strength. From careful analysis and deep going investigation, we think that it is the profile of equal conjugate curvature with high order of contact, and analyzed the forming principle of this kind of profile. Based on the second curve and comparative analysis of fourth order curves, combined with Chebyshev polynomial terms of higher order contact with tooth contact stress formula derived. Note high exposure in the case of two extreme points of stress and extreme positions and the derived extreme contact stress formula. Finally, a pair of conjugate gear tooth profile curvature provides specific contact stress calculation.

  4. Copolymers for soft hydrophilic contact lenses: development and investigations

    International Nuclear Information System (INIS)

    Schwach, G.W.

    1978-05-01

    Low esters of methacrylic acid which may be polymerized by different methods are used predominantly for producing soft hydrophilic contact lenses. Compounds of the vinyl-type often are added to improve the optical and mechanical qualities. Composition as well as possibilities of polymerization by irradiation were tested so long until copolymers were found which finally allowed the production of soft hydrophilic contact lenses. Swelling characteristics and permeability of the different elastomeres are to be investigated in order to guarantee sufficient compatibility of contact lenses. Contamination of the lens materials by microorganisms is also a point of special interest. The effects on the hydrophilic contact lens-copolymers by different substances used for cleaning and storage solutions have been investigated as well. (author)

  5. Tibiofemoral contact stress and stress distribution evaluation of total knee arthroplasties.

    Science.gov (United States)

    Szivek, J A; Cutignola, L; Volz, R G

    1995-08-01

    The Fuji film (Itochu, Los Angeles, CA) area analysis technique demonstrates that a more accurate assessment of tibiofemoral contact stresses is possible when the film is used at 37 degrees C and at the upper end of its sensitivity range (in this case, a 2,000-N load). An AMK with a regular and Hylamer-M insert (DePuy, Warsaw, IN), an MG II (Zimmer, Warsaw, IN), an Omnifit (Osteonics, Allendale, NJ), an Ortholoc III (Dow Corning Wright, Midland, MI), a PCA II (Howmedica, Rutherford, NJ), and a PFC (Johnson & Johnson Orthopaedics, Raynham, MA) had average contact stresses that varied only 12% at 60 degrees flexion. At 0 degrees, 15 degrees and 60 degrees flexion, stresses ranged from 13 to 25 MPa. Contact area distribution ratios, which were smaller at 37 degrees C than at 24 degrees C, provide a quantitative means of grouping implants according to the shape of the tibiofemoral contact area. The Omnifit, MG II, PCA II, and PFC had small ratios (symmetric areas). The AMK and Ortholoc III had large ratios (asymmetric contact areas). If the impression is reflective of wear, it would be expected to be focal in knees with small ratios and contact areas, and uniform in knees with large ratios and contact areas, whereas large ratios and small areas would imply a linear wear pattern. Calibrated electrical resistance contact stress measurements indicated that the Fuji film measurements underestimated the magnitude of contact stresses. They also provided a means of quantifying the rate of area increase during initial loading of the knees, with the highest area increase noted for the knee with the roughest insert (Ortholoc III) and the lowest area increase for the knee with the smoothest insert (PCA II).

  6. Influence of Stress Shape Function on Analysis of Contact Problem Using Hybrid Photoelasticity

    International Nuclear Information System (INIS)

    Shin, Dongchul; Hawong, Jaisug

    2013-01-01

    In this research, a study on stress shape functions was conducted to analyze the contact stress problem by using a hybrid photoelasticity. Because the contact stress problem is generally solved as a half-plane problem, the relationship between two analytical stress functions, which are compositions of the Airy stress function, was similar to one of the crack problem. However, this relationship in itself could not be used to solve the contact stress problem (especially one with singular points). Therefore, to analyze the contact stress problem more correctly, stress shape functions based on the condition of two contact end points had to be considered in the form of these two analytical stress functions. The four types of stress shape functions were related to the stress singularities at the two contact end points. Among them, the primary two types used for the analysis of an O-ring were selected, and their validities were verified in this work

  7. Regional Sign Language Varieties in Contact: Investigating Patterns of Accommodation

    Science.gov (United States)

    Stamp, Rose; Schembri, Adam; Evans, Bronwen G.; Cormier, Kearsy

    2016-01-01

    Short-term linguistic accommodation has been observed in a number of spoken language studies. The first of its kind in sign language research, this study aims to investigate the effects of regional varieties in contact and lexical accommodation in British Sign Language (BSL). Twenty-five participants were recruited from Belfast, Glasgow,…

  8. Effect of load, area of contact, and contact stress on the tribological properties of polyimide bonded graphite fluoride films

    Science.gov (United States)

    Fusaro, R. L.

    1981-01-01

    A pin-on-disk type of friction and wear apparatus was used to study the effect of load, contact stress and rider area of contact on the friction and wear properties of polyimide-bonded graphite fluoride films. Different rider area contacts were obtained by initially generating flats (with areas of 0.0035, 0.0071, 0.0145, and 0.0240 cm) on 0.476-cm radius hemispherically-tipped riders. Different projected contact stresses were obtained by applying loads of 2.5-to 58.8-N to the flats. Two film wear mechanisms were observed. The first was found to be a linear function of contact stress and was independent of rider area of contact. The second was found to increase exponentially as the stress increased. The second also appeared to be a function of rider contact area. Wear equations for each mechanism were empirically derived from the experimental data. In general, friction coefficients increased with increasing rider contact area and with sliding duration. This was related to the build-up of thick rider transfer films.

  9. Effect of load, area of contact, and contact stress on the wear mechanisms of a bonded solid lubricant film

    Science.gov (United States)

    Fusaro, R. L.

    1980-01-01

    A pin on disk type of friction and wear apparatus was used to study the effect of load, contact stress and rider area of contact on the friction and wear properties of polyimide bonded graphite fluoride films. Different rider area contacts were obtained by initially generating flats (with areas of 0.0035, 0.0071, 0.0145, and 0.0240 cm) on 0.476-cm radius hemispherically tipped riders. Different projected contact stresses were obtained by applying loads of 2.5- to 58.8-N to the flats. Two film wear mechanisms were observed. The first was found to be a linear function of contact stress and was independent of rider area of contact. The second was found to increase exponentially as the stress increased. The second also appeared to be a function of rider contact area. Wear equations for each mechanism were empirically derived from the experimental data. In general, friction coefficients increased with increasing rider contact area and with sliding duration. This was related to the build up of thick rider transfer films.

  10. Healthy workplaces: the effects of nature contact at work on employee stress and health.

    Science.gov (United States)

    Largo-Wight, Erin; Chen, W William; Dodd, Virginia; Weiler, Robert

    2011-01-01

    Cultivating healthy workplaces is a critical aspect of comprehensive worksite health promotion. The influence of healthy workplace exposures on employee health outcomes warrants research attention. To date, it is unknown if nature contact in the workplace is related to employee stress and health. This study was designed to examine the effects of nature contact experienced at work on employee stress and health. Office staff at a southeastern university (n = 503, 30% response rate) participated in the cross-sectional study. We used a 16-item workplace environment questionnaire, the Nature Contact Questionnaire, to comprehensively measure, for the first time, nature contact at work. The Perceived Stress Questionnaire and 13 established health and behavioral items assessed the dependent variables, general perceived stress, stress-related health behaviors, and stress-related health outcomes. There was a significant, negative association between nature contact and stress and nature contact and general health complaints. The results indicate that as workday nature contact increased, perceived stress and generalized health complaints decreased. The findings suggest that nature contact is a healthy workplace exposure. Increasing nature contact at work may offer a simple population-based approach to enhance workplace health promotion efforts. Future researchers should test the efficacy of nature-contact workplace stress interventions.

  11. Non-Contact Smartphone-Based Monitoring of Thermally Stressed Structures

    Science.gov (United States)

    Ozturk, Turgut; Mas, David; Rizzo, Piervincenzo

    2018-01-01

    The in-situ measurement of thermal stress in beams or continuous welded rails may prevent structural anomalies such as buckling. This study proposed a non-contact monitoring/inspection approach based on the use of a smartphone and a computer vision algorithm to estimate the vibrating characteristics of beams subjected to thermal stress. It is hypothesized that the vibration of a beam can be captured using a smartphone operating at frame rates higher than conventional 30 Hz, and the first few natural frequencies of the beam can be extracted using a computer vision algorithm. In this study, the first mode of vibration was considered and compared to the information obtained with a conventional accelerometer attached to the two structures investigated, namely a thin beam and a thick beam. The results show excellent agreement between the conventional contact method and the non-contact sensing approach proposed here. In the future, these findings may be used to develop a monitoring/inspection smartphone application to assess the axial stress of slender structures, to predict the neutral temperature of continuous welded rails, or to prevent thermal buckling. PMID:29670034

  12. Contact Stress Analysis for Gears of Different Helix Angle Using Finite Element Method

    Directory of Open Access Journals (Sweden)

    Patil Santosh

    2014-07-01

    Full Text Available The gear contact stress problem has been a great point of interest for many years, but still an extensive research is required to understand the various parameters affecting this stress. Among such parameters, helix angle is one which has played a crucial role in variation of contact stress. Numerous studies have been carried out on spur gear for contact stress variation. Hence, the present work is an attempt to study the contact stresses among the helical gear pairs, under static conditions, by using a 3D finite element method. The helical gear pairs on which the analysis is carried are 0, 5, 15, 25 degree helical gear sets. The Lagrange multiplier algorithm has been used between the contacting pairs to determine the stresses. The helical gear contact stress is evaluated using FE model and results have also been found at different coefficient of friction, varying from 0.0 to 0.3. The FE results have been further compared with the analytical calculations. The analytical calculations are based upon Hertz and AGMA equations, which are modified to include helix angle. The commercial finite element software was used in the study and it was shown that this approach can be applied to gear design efficiently. The contact stress results have shown a decreasing trend, with increase in helix angle.

  13. Investigation of the influence of vertical force on the contact between truck tyre and road using finite element analyses

    Science.gov (United States)

    Moisescu, Alexandra-Raluca; Anghelache, Gabriel

    2017-10-01

    In the modern context of automobile integration with the emerging technologies of the interconnected society, the interaction between tyre and road is an element of major importance for automobile safety systems such as the intelligent tyres, as well as for passenger comfort, fuel economy, environmental protection, infrastructure and vehicle durability. The tyre-road contact generates the distribution of forces exerted on each unit area in the contact patch, therefore the distribution of contact stresses on three orthogonal directions. The numerical investigation of stresses distribution in the contact patch requires the development of finite element models capable of accurately describing the interaction between tyre and rolling surface. The complex finite element model developed for the 11R22.5 truck tyre has been used for investigating the influence of vertical force on the distributions of contact stresses. In addition to these contributions, the paper presents aspects related to the simulation of truck tyre radial stiffness. The influence of tyre rolling has not been taken into consideration, as the purpose of the current research is the investigation of tyre-road contact in stationary conditions.

  14. A Procedure for 3-D Contact Stress Analysis of Spiral Bevel Gears

    Science.gov (United States)

    Kumar, A.; Bibel, G.

    1994-01-01

    Contact stress distribution of spiral bevel gears using nonlinear finite element static analysis is presented. Procedures have been developed to solve the nonlinear equations that identify the gear and pinion surface coordinates based on the kinematics of the cutting process and orientate the pinion and the gear in space to mesh with each other. Contact is simulated by connecting GAP elements along the intersection of a line from each pinion point (parallel to the normal at the contact point) with the gear surface. A three dimensional model with four gear teeth and three pinion teeth is used to determine the contact stresses at two different contact positions in a spiral bevel gearset. A summary of the elliptical contact stress distribution is given. This information will be helpful to helicopter and aircraft transmission designers who need to minimize weight of the transmission and maximize reliability.

  15. Numerical Analysis of the Influence of Clearance on Stress State and Contact Pressure in Plain Bearings

    Directory of Open Access Journals (Sweden)

    Vasile Cojocaru

    2017-12-01

    Full Text Available In the analysis of plain bearings by finite element method it is important to model as closely to real state the aspects that influence the stress and contact pressure: the loading mode, the properties of the materials, the lubrication system, the clearance between the shaft and the bearing body, the evolution in time of clearance correlated with the wear, etc. In order to study the effect of the clearance on the stress state, a plain bearing with nominal diameter d=40 mm was modeled. The contact pressure and the equivalent stress were computed for six discrete values of clearance, range from c=0 to c=0.3 mm. It has been shown that the increase of clearance generates an increase of the equivalent stress and contact pressure. The growth rate is higher for contact pressure, due to the decrease of the contact surface between the shaft and the bearing body

  16. An in-fiber Bragg grating sensor for contact force and stress measurements in articular joints

    International Nuclear Information System (INIS)

    Dennison, Christopher R; Wild, Peter M; Wilson, David R; Gilbart, Michael K

    2010-01-01

    We present an in-fiber Bragg grating-based sensor (240 µm diameter) for contact force/stress measurements in articular joints. The contact force sensor and another Bragg grating-based pressure sensor (400 µm diameter) are used to conduct the first simultaneous measurements of contact force/stress and fluid pressure in intact cadaveric human hips. The contact force/stress sensor addresses limitations associated with stress-sensitive films, the current standard tools for contact measurements in joints, including cartilage modulus-dependent sensitivity of films and the necessity to remove biomechanically relevant anatomy to implant the films. Because stress-sensitive films require removal of anatomy, it has been impossible to validate the mechanical rationale underlying preventive or corrective surgeries, which repair these anatomies, by conducting simultaneous stress and pressure measurements in intact hips. Methods are presented to insert the Bragg grating-based sensors into the joint, while relevant anatomy is left largely intact. Sensor performance is predicted using numerical models and the predicted sensitivity is verified through experimental calibrations. Contact force/stress and pressure measurements in cadaveric joints exhibited repeatability. With further validation, the Bragg grating-based sensors could be used to study the currently unknown relationships between contact forces and pressures in both healthy and degenerated joints

  17. contact stress analysis of involute spur gear by finite element method

    African Journals Online (AJOL)

    USER

    section using C- programming. Bending stress analysis has been performed using finite element analysis with ANSYS software. Comparison of bending stress analysis has been performed for symmetric and asymmetric spur gear tooth at critical section. Mushin J. Jweeg, et.al. [7] used 2D contact stress FEA model to ...

  18. Investigating Adolescent Stress and Body Image

    Science.gov (United States)

    Murray, Kristen M.; Byrne, Don G.; Rieger, Elizabeth

    2011-01-01

    Adolescent stress is clearly implicated in the development of mental health problems. However, its role in dysfunctional body image, which rises markedly in adolescence, has not been investigated. The present study examined the link between stress and body image, as well as self-esteem and depressive symptoms, in 533 high school students in grades…

  19. 3D Tyre/Road pavement contact stress measurements

    CSIR Research Space (South Africa)

    De Beer, Morris

    2010-10-01

    Full Text Available The CSIR’s proprietary Stress-in-Motion (SIM) measurements provide rational descriptions of 1D, 2D and 3D tyre/road pavement stresses for: Road pavement design testing and evaluation, as well as tyre design, testing and evaluation....

  20. Nature contact and organizational support during office working hours: Benefits relating to stress reduction, subjective health complaints, and sick leave.

    Science.gov (United States)

    Bjørnstad, Siv; Patil, Grete G; Raanaas, Ruth K

    2015-01-01

    Improving social support, and providing nature contact at work are potential health promoting workplace interventions. The objective was to investigate whether nature contact at work is associated with employee's health and participation, and to study whether the possible associations between nature contact and health can be explained by perceived organizational support. Data were collected through a web-based, cross-sectional survey of employees in seven public and private office workplaces in Norway (n = 707, 40% response rate). Multiple linear and logistic regression analysis were performed on 565 participants fulfilling inclusion criteria. A greater amount of indoor nature contact at work was significantly associated with less job stress (B = -0.18, CI = -0.318 to -0.042), fewer subjective health complaints (B = -0.278, CI = -0.445 to -0.112) and less sickness absence (B = -0.061, CI = -0.009 to -0.002). Perceived organizational support mediated the associations between indoor nature contact and job stress and sickness absence, and partly mediated the association with subjective health complaints. Outdoor nature contact showed no reliable association with the outcomes in this study. Extending nature contact in the physical work environment in offices, can add to the variety of possible health-promoting workplace interventions, primarily since it influences the social climate on the workplace.

  1. Contact-free Stress Monitoring for User's Divided Attention

    OpenAIRE

    Shastri, Dvijesh; Wesley, Avinash; Pavlidis, Ioannis

    2008-01-01

    This research work demonstrates the feasibility of stress quantification in situations where the attention of the user is divided. Psychologically kosher (i.e., unobtrusive) quantification of stress and its correlation to user performance and emotion are of singular importance in man-machine interaction. We have also proved that talking on a cell phone during simulated driving increases the supraorbital skin temperature significantly. This finding clearly demonstrates that concurrent performa...

  2. Contact stresses, pressure and area in a fixed-bearing total ankle replacement: a finite element analysis.

    Science.gov (United States)

    Martinelli, Nicolo; Baretta, Silvia; Pagano, Jenny; Bianchi, Alberto; Villa, Tomaso; Casaroli, Gloria; Galbusera, Fabio

    2017-11-25

    Mobile-bearing ankle implants with good clinical results continued to increase the popularity of total ankle arthroplasty to address endstage ankle osteoarthritis preserving joint movement. Alternative solutions used fixed-bearing designs, which increase stability and reduce the risk of bearing dislocation, but with a theoretical increase of contact stresses leading to a higher polyethylene wear. The purpose of this study was to investigate the contact stresses, pressure and area in the polyethylene component of a new total ankle replacement with a fixed-bearing design, using 3D finite element analysis. A three-dimensional finite element model of the Zimmer Trabecular Metal Total Ankle was developed and assembled based on computed tomography images. Three different sizes of the polyethylene insert were modeled, and a finite element analysis was conducted to investigate the contact pressure, the von Mises stresses and the contact area of the polyethylene component during the stance phase of the gait cycle. The peak value of pressure was found in the anterior region of the articulating surface, where it reached 19.8 MPa at 40% of the gait cycle. The average contact pressure during the stance phase was 6.9 MPa. The maximum von Mises stress of 14.1 MPa was reached at 40% of the gait cycle in the anterior section. In the central section, the maximum von Mises stress of 10.8 MPa was reached at 37% of the gait cycle, whereas in the posterior section the maximum stress of 5.4 MPa was reached at the end of the stance phase. The new fixed-bearing total ankle replacement showed a safe mechanical behavior and many clinical advantages. However, advanced models to quantitatively estimate the wear are need. To the light of the clinical advantages, we conclude that the presented prosthesis is a good alternative to the other products present in the market.

  3. Measurement of stress distributions in truck tyre contact patch in real rolling conditions

    Science.gov (United States)

    Anghelache, Gabriel; Moisescu, Raluca

    2012-12-01

    Stress distributions on three orthogonal directions have been measured across the contact patch of truck tyres using the complex measuring system that contains a transducer assembly with 30 sensing elements placed in the road surface. The measurements have been performed in straight line, in real rolling conditions. Software applications for calibration, data acquisition, and data processing were developed. The influence of changes in inflation pressure and rolling speed on the shapes and sizes of truck tyre contact patch has been shown. The shapes and magnitudes of normal, longitudinal, and lateral stress distributions, measured at low speed, have been presented and commented. The effect of wheel toe-in and camber on the stress distribution results was observed. The paper highlights the impact of the longitudinal tread ribs on the shear stress distributions. The ratios of stress distributions in the truck tyre contact patch have been computed and discussed.

  4. Contact analysis and experimental investigation of a linear ultrasonic motor.

    Science.gov (United States)

    Lv, Qibao; Yao, Zhiyuan; Li, Xiang

    2017-11-01

    The effects of surface roughness are not considered in the traditional motor model which fails to reflect the actual contact mechanism between the stator and slider. An analytical model for calculating the tangential force of linear ultrasonic motor is proposed in this article. The presented model differs from the previous spring contact model, the asperities in contact between stator and slider are considered. The influences of preload and exciting voltage on tangential force in moving direction are analyzed. An experiment is performed to verify the feasibility of this proposed model by comparing the simulation results with the measured data. Moreover, the proposed model and spring model are compared. The results reveal that the proposed model is more accurate than spring model. The discussion is helpful for designing and modeling of linear ultrasonic motors. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. Investigation of contact allergy to dental materials by patch testing

    Directory of Open Access Journals (Sweden)

    Reena Rai

    2014-01-01

    Full Text Available Background: Dental products are widely used by patients and dental personnel alike and may cause problems for both. Dental materials could cause contact allergy with varying manifestations such as burning, pain, stomatitis, cheilitis, ulcers, lichenoid reactions localized to the oral mucosa in patients, and hand dermatitis in dental personnel. Patch testing with the dental series comprising commonly used materials can be used to detect contact allergies to dental materials. Aim: This study aimed to identify contact allergy among patients who have oral mucosal lesions after dental treatment and among dental personnel who came in contact with these materials. Materials and Methods: Twenty patients who had undergone dental procedures with symptoms of oral lichen planus, oral stomatitis, burning mouth, and recurrent aphthosis, were included in the study. Dental personnel with history of hand dermatitis were also included in the study. Patch testing was performed using Chemotechnique Dental Series and results interpreted as recommended by the International Contact Dermatitis Research Group (ICDRG. Results: Out of 13 patients who had undergone dental treatment/with oral symptoms, six patients with stomatitis, lichenoid lesions, and oral ulcers showed positive patch tests to a variety of dental materials, seven patients with ulcers had negative patch tests, seven dental personnel with hand dermatitis showed multiple allergies to various dental materials, and most had multiple positivities. Conclusion: The patch test is a useful, simple, noninvasive method to detect contact allergies among patients and among dental personnel dealing with these products. Long term studies are necessary to establish the relevance of these positive patch tests by eliminating the allergic substances, identifying clinical improvement, and substituting with nonallergenic materials.

  6. Experimental Investigations on Microshock Waves and Contact Surfaces

    Science.gov (United States)

    Kai, Yun; Garen, Walter; Teubner, Ulrich

    2018-02-01

    The present work reports on progress in the research of a microshock wave. Because of the lack of a good understanding of the propagation mechanism of the microshock flow system (shock wave, contact surface, and boundary layer), the current work concentrates on measuring microshock flows with special attention paid to the contact surface. A novel setup involving a glass capillary (with a 200 or 300 μ m hydraulic diameter D ) and a high-speed magnetic valve is applied to generate a shock wave with a maximum initial Mach number of 1.3. The current work applies a laser differential interferometer to perform noncontact measurements of the microshock flow's trajectory, velocity, and density. The current work presents microscale measurements of the shock-contact distance L that solves the problem of calculating the scaling factor Sc =Re ×D /(4 L ) (introduced by Brouillette), which is a parameter characterizing the scaling effects of shock waves. The results show that in contrast to macroscopic shock waves, shock waves at the microscale have a different propagation or attenuation mechanism (key issue of this Letter) which cannot be described by the conventional "leaky piston" model. The main attenuation mechanism of microshock flow may be the ever slower moving contact surface, which drives the shock wave. Different from other measurements using pressure transducers, the current setup for density measurements resolves the whole microshock flow system.

  7. Investigation into Contact Resistance And Damage of Metal Contacts Used in RF-MEMS Switches

    Science.gov (United States)

    2009-09-01

    mechanically cycled by a piezo - electric transducer (PZT). The resistance through the simulated switch was measured using a four-wire measurement technique...determined that the microwave performance of a closed relay can be modeled as a simple resistor to a first order equivalent [106,108]. The relay resistance is...Therefore, a piezo device capable of precise higher frequency motion was chosen to provide cyclic contact motion. This device needed to be physically small

  8. DETERMINATION OF CONTACT STRESSES IN THE RAILS P50, WHICH ARE OPERATED IN THE METRO

    Directory of Open Access Journals (Sweden)

    O. V. Agarkov

    2015-07-01

    Full Text Available Purpose. In the research one should do: 1 to determine a 3-d stress-strain state of the rail head in contact with the rolling wheels; 2 to analyze different forms of contact interaction; 3 to obtain the data necessary to calculate the durability of railway track rails. Methodology. The basis for calculating the 3-d stress-strain state is the finite element method. The basis for calculating the volume of the stress-strain state is the finite element method. The problem was solved in the elastic 3-D conditions. Real geometrical bodies parameters were used during the solving. Findings. The calculation of the 3-d stress-strain state of the rail head in contact with the rolling wheels for various cases of the contact surfaces geometry is performed. The results of calculation are presented in the graphic and tabular form. The comparison of different options contact conditions is performed. The results are analyzed and conclusions about the optimality conditions of contact interaction are made. Originality. The results of the calculation showed that within the criterion of minimizing the contact stresses in the rails P50 for the conditions specific to the direct contact route section, the use of rolling wheels with a profile according to the drawings of CJSC «MINETEK» is not the most rational decision. The most rational in this case, among the considered is the laying of rails in track with gradient 1:20 and the use of the wheel with the rolling surface profile of 1:10 conicity. The lack of rail gradient eliminates the benefits of the wheel running surface with 1:10 conicity, and a case of contact interaction is the least rational. Practical value. The results of analysis of the contact interaction of the rail head with a rolling stock wheel in a three-dimensional elastic formulation for different conditions of contact interaction were obtained. These data can be used to optimize the conditions of contact interaction and scientific substantiation of

  9. Experimental and numerical investigation of contact-area-limited doping for top-contact pentacene thin-film transistors with Schottky contact.

    Science.gov (United States)

    Noda, Kei; Wada, Yasuo; Toyabe, Toru

    2015-10-28

    Effects of contact-area-limited doping for pentacene thin-film transistors with a bottom-gate, top-contact configuration were investigated. The increase in the drain current and the effective field-effect mobility was achieved by preparing hole-doped layers underneath the gold contact electrodes by coevaporation of pentacene and 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ), confirmed by using a thin-film organic transistor advanced simulator (TOTAS) incorporating Schottky contact with a thermionic field emission (TFE) model. Although the simulated electrical characteristics fit the experimental results well only in the linear regime of the transistor operation, the barrier height for hole injection and the gate-voltage-dependent hole mobility in the pentacene transistors were evaluated with the aid of the device simulation. This experimental data analysis with the simulation indicates that the highly-doped semiconducting layers prepared in the contact regions can enhance the charge carrier injection into the active semiconductor layer and concurrent trap filling in the transistor channel, caused by the mitigation of a Schottky energy barrier. This study suggests that both the contact-area-limited doping and the device simulation dealing with Schottky contact are indispensable in designing and developing high-performance organic thin-film transistors.

  10. Stress analysis of disconnected structures in contact through finite element gaps

    International Nuclear Information System (INIS)

    Stadter, J.T.; Weiss, R.O.

    1976-07-01

    A numerical procedure is presented for analyzing thermal stress problems of disconnected structures in contact across separations or gaps. The new procedure is called SAASGAPS, an adaptation of the basic SAAS III computer program. The SAAS program uses the finite element method and allows analyses of plane and axisymmetric bodies with temperature dependent material properties, subject to thermal and mechanical loads. A secant modulus approach with a bilinear stress-strain curve is used for elastic-plastic problems. The SAASGAPS version contains all of the features of the original SAAS program. A special gap element is used together with a stress invariance principle to model the contact process. The iterative procedure implemented in SAASGAPS is described. Results are discussed for five problems involving frictionless contact. Two of these problems are associated with the thermal stress analysis of the heat shield for the Multi-Hundred Watt Radioisotope Thermoelectric Generator. Input instructions for the program are described in an appendix

  11. Stresses in Coating with Gradient Interlayer caused by Contact Loading

    Directory of Open Access Journals (Sweden)

    Kulchytsky-Zhyhailo Roman

    2014-03-01

    Full Text Available The three-dimensional problem of elasticity concerning inhomogeneous half-space under normal and tangential loading applied in circular region was considered. The half-space is composed of the homogeneous body and double-layer coating which includes a homogeneous top coat and a gradient interlayer. The solution method is based on the two-dimensional integral Fourier transform. The influence of mechanical properties of coatings component and coefficient of friction on the first principal stress distribution was considered.

  12. Optimal design of the gerotor (2-ellipses) for reducing maximum contact stress

    Energy Technology Data Exchange (ETDEWEB)

    Kwak, Hyo Seo; Li, Sheng Huan [Dept. of Mechanical Convergence Technology, Pusan National University, Busan (Korea, Republic of); Kim, Chul [School of Mechanical Design and Manufacturing, Busan Institute of Science and Technology, Busan (Korea, Republic of)

    2016-12-15

    The oil pump, which is used as lubricator of engines and auto transmission, supplies working oil to the rotating elements to prevent wear. The gerotor pump is used widely in the automobile industry. When wear occurs due to contact between an inner rotor and an outer rotor, the efficiency of the gerotor pump decreases rapidly, and elastic deformation from the contacts also causes vibration and noise. This paper reports the optimal design of a gerotor with a 2-ellipses combined lobe shape that reduces the maximum contact stress. An automatic program was developed to calculate Hertzian contact stress of the gerotor using the Matlab and the effect of the design parameter on the maximum contact stress was analyzed. In addition, the method of theoretical analysis for obtaining the contact stress was verified by performing the fluid-structural coupled analysis using the commercial software, Ansys, considering both the driving force of the inner rotor and the fluid pressure, which is generated by working oil.

  13. Experimental investigation of direct contact three phase boiling heat transfer

    International Nuclear Information System (INIS)

    Bruce, W.D.

    1981-01-01

    The system which was studied in the present work consisted of one liquid undergoing vaporization by contact with a hotter immiscible liquid. The liquids and vapor were contacted in a counterflow spray column with only differential increases in vapor quality. Experiments yielded vertical temperature profiles, flow rates of the phases, liquid holdups, pressure drops, and a characterization of flow patterns. A micro-computer was utilized for measuring temperatures in the column at the rate of 1500 to 1600 times per second at several depths. Analysis of the experimental data indicate that the maximum temperature difference between the phases is 0.5F 0 , and that a temperature crossover occurs at the lower end of the column. The heat transfer fluid undergoes flash vaporization at its inlet at the top of the column, and much of its sensible heat is tranferred to the dispersed phase near the top of the column. Temperature profiles along the length of the boiler are nearly flat, and very little heat transfer occurs in the lower part of the boiler. A chemical method was developed for measuring effective interfacial area in a direct contact boiler. The theoretical basis of the method is discussed, and physico-chemical data necessary for application of the technique are reported. Water solubility of methyl salicylate was measured as a function of temperature, and the second order reaction rate coefficient for saponification of methyl salicylate by sodium hydroxide was determined from sodium hydroxide concentration versus time data and a computer model of a well-mixed semibatch reactor. The activation energy for the reaction was found to be 9.58 kilocalories per gram mole

  14. Reliability of Semiautomated Computational Methods for Estimating Tibiofemoral Contact Stress in the Multicenter Osteoarthritis Study

    Directory of Open Access Journals (Sweden)

    Donald D. Anderson

    2012-01-01

    Full Text Available Recent findings suggest that contact stress is a potent predictor of subsequent symptomatic osteoarthritis development in the knee. However, much larger numbers of knees (likely on the order of hundreds, if not thousands need to be reliably analyzed to achieve the statistical power necessary to clarify this relationship. This study assessed the reliability of new semiautomated computational methods for estimating contact stress in knees from large population-based cohorts. Ten knees of subjects from the Multicenter Osteoarthritis Study were included. Bone surfaces were manually segmented from sequential 1.0 Tesla magnetic resonance imaging slices by three individuals on two nonconsecutive days. Four individuals then registered the resulting bone surfaces to corresponding bone edges on weight-bearing radiographs, using a semi-automated algorithm. Discrete element analysis methods were used to estimate contact stress distributions for each knee. Segmentation and registration reliabilities (day-to-day and interrater for peak and mean medial and lateral tibiofemoral contact stress were assessed with Shrout-Fleiss intraclass correlation coefficients (ICCs. The segmentation and registration steps of the modeling approach were found to have excellent day-to-day (ICC 0.93–0.99 and good inter-rater reliability (0.84–0.97. This approach for estimating compartment-specific tibiofemoral contact stress appears to be sufficiently reliable for use in large population-based cohorts.

  15. Fatigue life prediction method for contact wire using maximum local stress

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yong Seok; Haochuang, Li; Seok, Chang Sung; Koo, Jae Mean [Sungkyunkwan University, Suwon (Korea, Republic of); Lee, Ki Won; Kwon, Sam Young; Cho, Yong Hyeon [Korea Railroad Research Institute, Uiwang (Korea, Republic of)

    2015-01-15

    Railway contact wires supplying electricity to trains are exposed to repeated mechanical strain and stress caused by their own weight and discontinuous contact with a pantograph during train operation. Since the speed of railway transportation has increased continuously, railway industries have recently reported a number of contact wire failures caused by mechanical fatigue fractures instead of normal wear, which has been a more common failure mechanism. To secure the safety and durability of contact wires in environments with increased train speeds, a bending fatigue test on contact wire has been performed. The test equipment is too complicated to evaluate the fatigue characteristics of contact wire. Thus, the axial tension fatigue test was performed for a standard specimen, and the bending fatigue life for the contact wire structure was then predicted using the maximum local stress occurring at the top of the contact wire. Lastly, the tested bending fatigue life of the structure was compared with the fatigue life predicted by the axial tension fatigue test for verification.

  16. Fatigue life prediction method for contact wire using maximum local stress

    International Nuclear Information System (INIS)

    Kim, Yong Seok; Haochuang, Li; Seok, Chang Sung; Koo, Jae Mean; Lee, Ki Won; Kwon, Sam Young; Cho, Yong Hyeon

    2015-01-01

    Railway contact wires supplying electricity to trains are exposed to repeated mechanical strain and stress caused by their own weight and discontinuous contact with a pantograph during train operation. Since the speed of railway transportation has increased continuously, railway industries have recently reported a number of contact wire failures caused by mechanical fatigue fractures instead of normal wear, which has been a more common failure mechanism. To secure the safety and durability of contact wires in environments with increased train speeds, a bending fatigue test on contact wire has been performed. The test equipment is too complicated to evaluate the fatigue characteristics of contact wire. Thus, the axial tension fatigue test was performed for a standard specimen, and the bending fatigue life for the contact wire structure was then predicted using the maximum local stress occurring at the top of the contact wire. Lastly, the tested bending fatigue life of the structure was compared with the fatigue life predicted by the axial tension fatigue test for verification.

  17. Measurement accuracy of a stressed contact lens during its relaxation period

    Science.gov (United States)

    Compertore, David C.; Ignatovich, Filipp V.

    2018-02-01

    We examine the dioptric power and transmitted wavefront of a contact lens as it releases its handling stresses. Handling stresses are introduced as part of the contact lens loading process and are common across all contact lens measurement procedures and systems. The latest advances in vision correction require tighter quality control during the manufacturing of the contact lenses. The optical power of contact lenses is one of the critical characteristics for users. Power measurements are conducted in the hydrated state, where the lens is resting inside a solution-filled glass cuvette. In a typical approach, the contact lens must be subject to long settling times prior to any measurements. Alternatively, multiple measurements must be averaged. Apart from potential operator dependency of such approach, it is extremely time-consuming, and therefore it precludes higher rates of testing. Comprehensive knowledge about the settling process can be obtained by monitoring multiple parameters of the lens simultaneously. We have developed a system that combines co-aligned a Shack-Hartmann transmitted wavefront sensor and a time-domain low coherence interferometer to measure several optical and physical parameters (power, cylinder power, aberrations, center thickness, sagittal depth, and diameter) simultaneously. We monitor these parameters during the stress relaxation period and show correlations that can be used by manufacturers to devise methods for improved quality control procedures.

  18. Identifying barriers to and facilitators of tuberculosis contact investigation in Kampala, Uganda: a behavioral approach.

    Science.gov (United States)

    Ayakaka, Irene; Ackerman, Sara; Ggita, Joseph M; Kajubi, Phoebe; Dowdy, David; Haberer, Jessica E; Fair, Elizabeth; Hopewell, Philip; Handley, Margaret A; Cattamanchi, Adithya; Katamba, Achilles; Davis, J Lucian

    2017-03-09

    The World Health Organization recommends routine household tuberculosis contact investigation in high-burden countries but adoption has been limited. We sought to identify barriers to and facilitators of TB contact investigation during its introduction in Kampala, Uganda. We collected cross-sectional qualitative data through focus group discussions and interviews with stakeholders, addressing three core activities of contact investigation: arranging household screening visits through index TB patients, visiting households to screen contacts and refer them to clinics, and evaluating at-risk contacts coming to clinics. We analyzed the data using a validated theory of behavior change, the Capability, Opportunity, and Motivation determine Behavior (COM-B) model, and sought to identify targeted interventions using the related Behavior Change Wheel implementation framework. We led seven focus-group discussions with 61 health-care workers, two with 21 lay health workers (LHWs), and one with four household contacts of newly diagnosed TB patients. We, in addition, performed 32 interviews with household contacts from 14 households of newly diagnosed TB patients. Commonly noted barriers included stigma, limited knowledge about TB among contacts, insufficient time and space in clinics for counselling, mistrust of health-center staff among index patients and contacts, and high travel costs for LHWs and contacts. The most important facilitators identified were the personalized and enabling services provided by LHWs. We identified education, persuasion, enablement, modeling of health-positive behaviors, incentivization, and restructuring of the service environment as relevant intervention functions with potential to alleviate barriers to and enhance facilitators of TB contact investigation. The use of a behavioral theory and a validated implementation framework provided a comprehensive approach for systematically identifying barriers to and facilitators of TB contact

  19. Effect of Contact Conditions on Void Coalescence at Low Stress Triaxiality Shearing

    DEFF Research Database (Denmark)

    Dahl, Jonas; Nielsen, Kim Lau; Tvergaard, Viggo

    2012-01-01

    , the deformed voids develop into shapes that closely resemble micro-cracks. It is found that the predictions using the frictionless pseudo-contact approach are in rather good agreement with corresponding simulations that fully account for frictionless contact. In particular, good agreement is found at close...... to zero stress triaxiality. Furthermore, it is shown that accounting for friction at the void surface strongly postpones the onset of coalescence, hence, increasing the overall material ductility. The changes in overall material behavior are here presented for a wide range of initial material and loading...... conditions, such as various stress triaxialities, void sizes, and friction coefficients....

  20. Cornea stress test--evaluation of corneal endothelial function in vivo by contact lens induced stress

    Directory of Open Access Journals (Sweden)

    Saini Jagjit

    1997-01-01

    Full Text Available Reliable and valid assessment of corneal endothelial function is a critical input for diagnosing, prognosticating and monitoring progression of disorders affecting corneal endothelium. In 123 eyes, corneal endothelial function was assessed employing data from the corneal hydration recovery dynamics. Serial pachometric readings were recorded on Haag-Striet pachometer with Mishima-Hedbys modification before and after two hours of thick soft contact lens wear. Percentage Recovery Per Hour (PRPH was derived from raw data as an index of endothelial function. Assessed PRPH in pseudophakic corneal oedema and Fuchs′ endothelial dystrophy eyes (35.9 +/- 9.8% was significantly lower than normal controls (61.9 +/- 10.5%. On employing receiver operation characteristics curve analysis the tested results demonstrated high sensitivity (87% and specificity (92% for detection of low endothelial function at PRPH cut off of 47.5%. Using this PRPH cut off, 80% of Fuchs′ endothelial dystrophy and 93.3% of pseudophakic corneal oedema eyes could be demonstrated to have low endothelial function. A total of 66.7% of diabetic eyes also demonstrated PRPH of lower than 47.5%. Clear corneal grafts demonstrated PRPH values of 24.6% to 73.0%. Of 6 corneal grafts that demonstrated initial PRPH of lower than 47.5%, 4 failed within 4 to 6 months. Our data demonstrated high sensitivity and specificity of this corneal stress test. PRPH index was useful in quantifying endothelial function in clinical disorders including diabetes mellitus. The index PRPH was demonstrated to be useful in monitoring and prognosticating outcome of corneal grafts.

  1. Numerical investigations on unstable direct contact condensation of cryogenic fluids

    Science.gov (United States)

    Jayachandran, K. N.; Arnab, Roy; Parthasarathi, Ghosh

    2017-02-01

    A typical problem of Direct Contact Condensation (DCC) occurs at the liquid oxygen (LOX) booster turbopump exit of oxidiser rich staged combustion cycle based semi-cryogenic rocket engines, where the hot gas mixture (predominantly oxygen and small amounts of combustion products) that runs the turbine mixes with LOX from the pump exit. This complex multiphase phenomena leads to the formation of solid CO2 & H2O, which is undesirable for the functioning of the main LOX turbopump. As a starting point for solving this complex problem, in this study, the hot gas mixture is taken as pure oxygen and hence, DCC of pure oxygen vapour jets in subcooled liquid oxygen is simulated using the commercial CFD package ANSYS CFX®. A two fluid model along with the thermal phase change model is employed for capturing the heat and mass transfer effects. The study mainly focuses on the subsonic DCC bubbling regime, which is reported as unstable with bubble formation, elongation, necking and collapsing effects. The heat transfer coefficients over a period of time have been computed and the various stages of bubbling have been analysed with the help of vapour volume fraction and pressure profiles. The results obtained for DCC of oxygen vapour-liquid mixtures is in qualitative agreement with the experimental results on DCC of steam-water mixtures.

  2. Fragrance contact dermatitis: a worldwide multicenter investigation (Part I).

    Science.gov (United States)

    Larsen, W; Nakayama, H; Lindberg, M; Fischer, T; Elsner, P; Burrows, D; Jordan, W; Shaw, S; Wilkinson, J; Marks, J; Sugawara, M; Nethercott, J

    1996-06-01

    The aim of this study was to determine the prevalence of responses to selected fragrance materials in patients with suspect fragrance allergy and to evaluate risk factors and associations with such responses. The validity of using specific fragrance ingredients versus a mixture of fragrances was evaluated in terms of predicting allergy to different fragrance ingredients. One hundred sixty-seven subjects were evaluated in seven centers worldwide with a fragrance mix, the eight ingredients in the fragrance mixture, six other well-known fragrance allergens, balsam of Peru, and 15 lesser studied fragrance materials. The age of the patients was 44.9 +/- 17.5 years (mean +/- SD). More than 85% were women. A relatively high proportion gave a past history of atopic disease. Facial eruptions (40%) and hand involvement (26.7%) were the most common topographic sites. All but 4 of the 35 fragrance materials produced a positive response in > 1%. A reaction to fragrance mix occurred in 47.3%. Seven of the 34 ingredients tested produced an allergic response in more than 10% of those tested. Men were more likely than women to exhibit a positive response to five fragrance ingredients. White persons were more likely to react to perfume mix (52.8% versus 25.3%) and certain ingredients in the mix than Asian persons. Allergy to benzyl salicylate was more common in Japan than in Europe or the United States. The age at which patients with perfume allergy present for evaluation is similar to that of other contactants. Atopic individuals may be overrepresented in this group of patients. Face involvement is likely. White persons are more likely to react to fragrance mix, whereas in Asian patients benzyl salicylate was a more frequent allergen. Fragrance mix corrected with 85.6% of positive responses to fragrance ingredients. The addition of ylang ylang oil, narcissus oil, and sandalwood oil to fragrance mix would be expected to pick up 94.2% with positive responses to fragrance materials

  3. Failure mechanism of coated biomaterials under high impact-sliding contact stresses

    Science.gov (United States)

    Chen, Ying

    This study uses a newly developed testing method--- inclined cyclic impact-sliding test to investigate the failure behaviors of different types of biomaterials, (SS316L, Ti6Al4V and CoCr) coated by different coatings (TiN, DLC and PEO), under extremely high dynamic contact stress conditions. This test method can simulate the combined impact and sliding/rolling loading conditions, which is very practical in many aspects of commercial usages. During the tests, fatigue cracking, chipping, peeling and material transferring were observed in damaged area. This research is mainly focused on the failure behaviors of load-bearing materials which cyclic impacting and sliding are always involved. This purpose was accomplished in the three stages: First, impact-sliding test was carried out on TiN coated unhardened M2. It was found that soft substrate can cause early failure of coating due to the considerable plastic deformation in the substrate. In this case, stronger substrate is required to support coating better when tested under high contact stresses. Second, PEO coated Ti-6Al-4V was tested under pure sliding and impact-sliding wear conditions. PEO coating was found not strong enough to afford the high contact pressure under cyclic impact-sliding wear test due to its porous surface structure. However, the wear performance of PEO coating was enhanced due to the sub-stoichiometric oxide. To sum up, for load-bearing biomedical implants involved in high impacting movement, PEO coating may not be a promising surface protection. Third, the dense, smooth PVD/CVD bio-inert coatings were reconsidered. DLC and TiN coatings, combined by different substrates together with different interface materials were tested under the cyclic impact-sliding test using a set of proper loading. The results show that to choose a proper combination of coating, interface and substrate based on their mechanical properties is of great importance under the test condition. Hard substrates provide support

  4. Influence of occlusal contact area on cusp defection and stress distribution.

    Science.gov (United States)

    Costa, Anna Karina Figueiredo; Xavier, Thaty Aparecida; Paes-Junior, Tarcisio José Arruda; Andreatta-Filho, Oswaldo Daniel; Borges, Alexandre Luiz Souto

    2014-11-01

    The purpose of this study was to evaluate the effect of occlusal contact area for loading on the cuspal defection and stress distribution in a first premolar restored with a high elastic modulus restorative material. The Rhinoceros 4.0 software was used for modeling the three-dimensional geometries of dental and periodontal structures and the inlay restoration. Thus, two different models, intact and restored teeth with three occlusal contact areas, 0.1, 0.5 and 0.75 mm(2), on enamel at the occlusal surface of buccal and lingual cusps. Finite element analysis (FEA) was performed with the program ANSYS (Workbench 13.0), which generated a mesh with tetrahedral elements with greater refinement in the regions of interest, and was constrained at the bases of cortical and trabecular bone in all axis and loaded with 100 N normal to each contact area. To analysis of maximum principal stress, the smaller occlusal contact area showed greater compressive stress in region of load application for both the intact and inlay restored tooth. However, tensile stresses at the occlusal isthmus were similar for all three tested occlusal contact areas (60 MPa). To displacement of the cusps was higher for teeth with inlay (0.46-0.48 mm). For intact teeth, the smaller contact area showed greater displacement (0.10 mm). For teeth with inlays, the displacement of the cusps were similar in all types of occlusal area. Cuspal displacement was higher in the restored tooth when compared to the intact tooth, but there were no significant variations even with changes in the occlusal contact area. RELEVANCE CLINICAL: Occlusal contacts have a great influence on the positioning of teeth being able to maintain the position and stability of the mandible. Axial loads would be able to generate more uniform stress at the root presenting a greater concentration of load application in the point and the occlusal surface. Thus, is necessary to analyze the relationship between these occlusal contacts as dental

  5. Modelling tyre-road contact stresses in pavement design and analysis

    CSIR Research Space (South Africa)

    Maina, JW

    2013-07-01

    Full Text Available between rolling tyres and the road structure it needs to be durable so as to withstand current traffic loading and hence contact stresses, given the environmental forces also acting on it. For road infrastructure to perform as expected, it is important...

  6. Effects of moving dynamic tyre loads on tyre-pavement contact stresses

    CSIR Research Space (South Africa)

    Steyn, WJvdM

    2002-01-01

    Full Text Available The purpose of this paper is to indicate the effect that moving dynamic tyre loads has on the tyre-pavement contact stresses used in pavement analysis. Traditionally tyre loads (in pavement analysis) are modelled as constant loads applied through...

  7. Analytical and experimental investigation of microstructural alterations in bearing steel in rolling contact fatigue

    Science.gov (United States)

    Mobasher Moghaddam, Sina

    Rolling Contact Fatigue (RCF) is one the most common failure modes in bearings. RCF is usually associated with particular microstructural alterations. Such alterations (i.e. white etching cracks, butterflies, etc.) which lead to RCF failure are known to be among the most concerning matters to bearing industry. In the current work, an analytical as well as experimental approaches are used to investigate "butterfly wing" formation, crack initiation and propagation from inclusions. A new damage evolution equation coupled with a FE model is employed to account for the effect of mean stresses and alternating stresses simultaneously to investigate butterfly formation. The proposed damage evolution law matches experimentally observed butterfly orientation, shape, and size successfully. The model is used to obtain S-N results for butterfly formation at different Hertzian load levels. The results corroborate well with the experimental data available in the open literature. The model is used to predict debonding at the inclusion/matrix interface and the most vulnerable regions for crack initiation on butterfly/matrix interface. A new variable called butterfly formation index (BFI) is introduced to manifest the dependence of wing formation on depth. The value of critical damage inside the butterfly wings was obtained experimentally and was then used to simulate damage evolution. Voronoi tessellation was used to develop the FEM domains to capture the effect of microstructural randomness on butterfly wing formation, crack initiation and propagation. Then, the effects of different inclusion characteristics such as size, depth, and stiffness on RCF life are studied. The results show that stiffness of an inclusion and its location has a significant effect on the RCF life: stiffer inclusions and inclusions located at the depth of maximum shear stress reversal are more detrimental to the RCF life. Stress concentrations are not significantly affected by inclusion size for the cases

  8. Comparative meta-analysis of tuberculosis contact investigation interventions in eleven high burden countries

    NARCIS (Netherlands)

    Blok, Lucie; Sahu, Suvanand; Creswell, Jacob; Alba, Sandra; Stevens, Robert; Bakker, Mirjam I.

    2015-01-01

    Screening of household contacts of tuberculosis (TB) patients is a recommended strategy to improve early case detection. While it has been widely implemented in low prevalence countries, the most optimal protocols for contact investigation in high prevalence, low resource settings is yet to be

  9. Comparative meta-analysis of tuberculosis contact investigation interventions in eleven high burden countries.

    Directory of Open Access Journals (Sweden)

    Lucie Blok

    Full Text Available Screening of household contacts of tuberculosis (TB patients is a recommended strategy to improve early case detection. While it has been widely implemented in low prevalence countries, the most optimal protocols for contact investigation in high prevalence, low resource settings is yet to be determined. This study evaluated contact investigation interventions in eleven lower and middle income countries and reviewed the association between context or program-related factors and the yield of cases among contacts.We reviewed data from nineteen first wave TB REACH funded projects piloting innovations to improve case detection. These nineteen had fulfilled the eligibility criteria: contact investigation implementation and complete data reporting. We performed a cross-sectional analysis of the percentage yield and case notifications for each project. Implementation strategies were delineated and the association between independent variables and yield was analyzed by fitting a random effects logistic regression.Overall, the nineteen interventions screened 139,052 household contacts, showing great heterogeneity in the percentage yield of microscopy confirmed cases (SS+, ranging from 0.1% to 6.2%. Compared to the most restrictive testing criteria (at least two weeks of cough the aOR's for lesser (any TB related symptom and least (all contacts restrictive testing criteria were 1.71 (95%CI 0.94-3.13 and 6.90 (95% CI 3.42-13.93 respectively. The aOR for inclusion of SS- and extra-pulmonary TB was 0.31 (95% CI 0.15-0.62 compared to restricting index cases to SS+ TB. Contact investigation contributed between <1% and 14% to all SS+ cases diagnosed in the intervention areas.This study confirms that high numbers of active TB cases can be identified through contact investigation in a variety of contexts. However, design and program implementation factors appear to influence the yield of contact investigation and its concomitant contribution to TB case detection.

  10. Expedited patient-specific assessment of contact stress exposure in the ankle joint following definitive articular fracture reduction.

    Science.gov (United States)

    Kern, Andrew M; Anderson, Donald D

    2015-09-18

    Acute injury severity, altered joint kinematics, and joint incongruity are three important mechanical factors linked to post-traumatic osteoarthritis (PTOA). Finite element analysis (FEA) was previously used to assess the influence of increased contact stress due to joint incongruity on PTOA development. While promising agreement with PTOA development was seen, the inherent complexities of contact FEA limited the numbers of subjects that could be analyzed. Discrete element analysis (DEA) is a simplified methodology for contact stress computation, which idealizes contact surfaces as a bed of independent linear springs. In this study, DEA was explored as an expedited alternative to FEA contact stress exposure computation. DEA was compared to FEA using results from a previously completed validation study of two cadaveric human ankles, as well as a previous study of post-operative contact stress exposure in 11 patients with tibial plafond fracture. DEA-computed maximum contact stresses were within 19% of those experimentally measured, with 90% of the contact area having computed contact stress values within 1MPa of those measured. In the 11 fractured ankles, maximum contact stress and contact area differences between DEA and FEA were 0.85 ± 0.64 MPa and 22.5 ± 11.5mm(2). As a predictive measure for PTOA development, both DEA and FEA had 100% concordance with presence of OA (KL grade ≥ 2) and >95% concordance with KL grade at 2 years. These results support DEA as a reasonable alternative to FEA for computing contact stress exposures following surgical reduction of a tibial plafond fracture. Copyright © 2015 Elsevier Ltd. All rights reserved.

  11. Evaluation of TB Case Finding through Systematic Contact Investigation, Chhattisgarh, India

    Directory of Open Access Journals (Sweden)

    Kshitij Khaparde

    2015-01-01

    Full Text Available Rationale. Contact investigation is an established tool for early case detection of tuberculosis (TB. In India, contact investigation is not often conducted, despite national policy, and the yield of contact investigation is not well described. Objective. To determine the yield of evaluating household contacts of sputum smear-positive TB cases in Rajnandgaon district, Chhattisgarh, India. Methods. Among 14 public health care facilities with sputum smear microscopy services, home visits were conducted to identify household contacts of all registered sputum smear-positive TB cases. We used a standardized protocol to screen for clinical symptoms suggestive of active TB with additional referral for chest radiograph and sputa collection. Results. From December 2010 to May 2011, 1,556 household contacts of 312 sputum smear-positive TB cases were identified, of which 148 (9.5% were symptomatic. Among these, 109 (73.6% were evaluated by sputum examination resulting in 11 cases (10.1% of sputum smear-positive TB and 4 cases (3.6% of smear-negative TB. Household visits contributed additional 63% TB cases compared to passive case detection alone. Conclusion. A standard procedure for conducting household contact investigation identified additional TB cases in the community and offered an opportunity to initiate isoniazid chemoprophylaxis among children.

  12. Discrete element analysis is a valid method for computing joint contact stress in the hip before and after acetabular fracture.

    Science.gov (United States)

    Townsend, Kevin C; Thomas-Aitken, Holly D; Rudert, M James; Kern, Andrew M; Willey, Michael C; Anderson, Donald D; Goetz, Jessica E

    2018-01-23

    Evaluation of abnormalities in joint contact stress that develop after inaccurate reduction of an acetabular fracture may provide a potential means for predicting the risk of developing post-traumatic osteoarthritis. Discrete element analysis (DEA) is a computational technique for calculating intra-articular contact stress distributions in a fraction of the time required to obtain the same information using the more commonly employed finite element analysis technique. The goal of this work was to validate the accuracy of DEA-computed contact stress against physical measurements of contact stress made in cadaveric hips using Tekscan sensors. Four static loading tests in a variety of poses from heel-strike to toe-off were performed in two different cadaveric hip specimens with the acetabulum intact and again with an intentionally malreduced posterior wall acetabular fracture. DEA-computed contact stress was compared on a point-by-point basis to stress measured from the physical experiments. There was good agreement between computed and measured contact stress over the entire contact area (correlation coefficients ranged from 0.88 to 0.99). DEA-computed peak contact stress was within an average of 0.5 MPa (range 0.2-0.8 MPa) of the Tekscan peak stress for intact hips, and within an average of 0.6 MPa (range 0-1.6 MPa) for fractured cases. DEA-computed contact areas were within an average of 33% of the Tekscan-measured areas (range: 1.4-60%). These results indicate that the DEA methodology is a valid method for accurately estimating contact stress in both intact and fractured hips. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Degradation of Au–Ti contacts of SiGe HBTs during electromagnetic field stress

    International Nuclear Information System (INIS)

    Alaeddine, A; Genevois, C; Cuvilly, F; Daoud, K; Kadi, M

    2011-01-01

    This paper addresses electromagnetic field stress effects on SiGe heterojunction bipolar transistors (HBTs)' reliability issues, focusing on the relationship between the stress-induced current and device structure degradations. The origin of leakage currents and electrical parameter shifts in failed transistors has been studied by complementary failure analysis techniques. Characterization of the structure before and after ageing was performed by transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS). For the stressed samples, interface deformations of the titanium (Ti) thin film around all gold (Au) contacts have been clearly detected. These degradations include localized interface reaction between Au and Ti layers as well as their lateral atomic migration causing a significant reduction of Ti thickness. EDS analysis of the disordered region which is near the Si 3 N 4 interface has shown significant signals from Au. These observations could be attributed to the coupling between high current densities induced by stress and thermal effects due to local heating effects

  14. Investigation of biofilm formation on contact eye lenses caused by methicillin resistant Staphylococcus aureus.

    Science.gov (United States)

    Khalil, M A; Sonbol, F I

    2014-01-01

    The objective was to investigate the biofilm-forming capacity of methicillin resistant Staphylococcus aureus (MRSA) isolated from eye lenses of infected patients. A total of 32 MRSA isolated from contact lenses of patients with ocular infections were screened for their biofilm-forming capacity using tube method (TM), Congo red agar (CRA), and microtiter plate (MtP) methods. The effect of some stress factor on the biofilm formation was studied. The biofilm-forming related genes, icaA, icaD and 10 microbial surface components that recognize adhesive matrix molecule (MSCRAMM), of the selected MRSA were also detected using polymerase chain reaction. Of 32 MRSA isolates, 34.37%, 59.37%, and 81.25% showed positive results using CRA, TM or MtP, respectively. Biofilm production was found to be reduced in the presence of ethanol or ethylenediaminetetraacetic acid and at extreme pH values. On the other hand, glucose or heparin leads to a concentration dependent increase of biofilm production by the isolates. The selected biofilm producing MRSA isolate was found to harbor the icaA, icaD and up to nine of 10 tested MSCRAMM genes, whereas the selected non biofilm producing MRSA isolate did not carry any of the tested genes. The MtP method was found to be the most effective phenotypic screening method for detection of biofilm formation by MRSA. Furthermore, the molecular approach should be taken into consideration for the rapid and correct diagnosis of virulent bacteria associated with contact eye lenses.

  15. Stress-life relation of the rolling-contact fatigue spin rig

    Science.gov (United States)

    Butler, Robert H; Carter, Thomas L

    1957-01-01

    The rolling-contact fatigue spin rig was used to test groups of SAE 52100 9.16-inch-diameter balls lubricated with a mineral oil at 600,000-, 675,000-, and 750,000-psi maximum Hertz stress. Cylinders of AISI M-1 vacuum and commercial melts and MV-1 (AISI M-50) were used as race specimens. Stress-life exponents produced agree closely with values accepted in industry. The type of failure obtained in the spin rig was similar to the subsurface fatigue spells found in bearings.

  16. Effect of Friction Model and Tire Maneuvering on Tire-Pavement Contact Stress

    Directory of Open Access Journals (Sweden)

    Haichao Zhou

    2015-01-01

    Full Text Available This paper aims to simulate the effects of different friction models on tire braking. A truck radial tire (295/80R22.5 was modeled and the model was validated with tire deflection. An exponential decay friction model that considers the effect of sliding velocity on friction coefficients was adopted for analyzing braking performance. The result shows that the exponential decay friction model used for evaluating braking ability meets design requirements of antilock braking system (ABS. The tire-pavement contact stress characteristics at various driving conditions (static, free rolling, braking, camber, and cornering were analyzed. It is found that the change of driving conditions has direct influence on tire-pavement contact stress distribution. The results provide the guidance for tire braking performance evaluation.

  17. Abnormal tibiofemoral contact stress and its association with altered kinematics following center-center ACL reconstruction: an in vitro study

    Science.gov (United States)

    Imhauser, Carl; Mauro, Craig; Choi, Daniel; Rosenberg, Eric; Mathew, Stephen; Nguyen, Joseph; Ma, Yan; Wickiewicz, Thomas

    2014-01-01

    Background Abnormal tibiofemoral contact stress and aberrant kinematics may influence the progression of osteoarthritis in the ACL-deficient and the ACL-reconstructed knee. However, relationships between contact stress and kinematics following ACL reconstruction are poorly understood. Therefore, we posed the following research questions: (1) How do ACL deficiency and reconstruction affect kinematics of and contact stress in the tibiofemoral joint? (2) What kinematic differences are associated with abnormal contact stress following ACL reconstruction? Hypothesis/Purpose Center-center ACL reconstruction will not restore knee kinematics and contact stress. Correlations will exist between abnormal contact stress and aberrant kinematics following ACL reconstruction will exist. Study Design Controlled laboratory study Methods Clinical tests of anterior and rotational stability were simulated on eleven cadaveric knees using an industrial robot. Tests were conducted with the ACL intact, sectioned, and after single bundle ACL reconstruction using a quadrupled hamstring autograft with tunnels drilled through the center of the native footprints. Kinematics were recorded during the tests. Contact stress was continuously recorded from a stress transducer fixed to the tibial plateau and mean contact stress was calculated regionally. Results ACL deficiency resulted in increased mean contact stress in the posterior sectors of the medial and lateral compartments under anterior and rotational loads, respectively. Reconstruction reduced stress in these locations; however contact stress abnormalities remained. On average, kinematics were overconstrained following ACL reconstruction (≤1.8mm and ≤2.6° in all directions). However, combinations of overconstrained and underconstrained motions in ab/adduction and medial-lateral translation in response to combined moments, and axial rotation, anterior-posterior and medial-lateral translation in response to an anterior load were

  18. Fuel rod-to-support contact pressure and stress measurement for CHASNUPP-1(PWR) fuel

    International Nuclear Information System (INIS)

    Waseem; Elahi, N.; Siddiqui, A.; Murtaza, G.

    2011-01-01

    Research highlights: → A detailed finite element model of spacer grid cell with fuel rod-to-support has been developed to determine the contact pressure between the supports of the grid and fuel rod cladding. → The spring hold-down force is calculated using the contact pressure obtained from the FE model. → Experiment has also been conducted in the same environment for the measurement of this force. → The spring hold-down force values obtained from both studies confirm the validation of this analysis. → The stress obtained through this analysis is less than the yield strength of spacer grid material, thus fulfils the structural integrity criteria of grid. - Abstract: This analysis has been made in an attempt to measure the contact pressure of the PWR fuel assembly spacer grid spring and to verify its structural integrity at room temperature in air. A detailed finite element (FE) model of spacer grid cell with fuel rod-to-support has been developed to determine the contact pressure between the supports of the grid and fuel rod cladding. The FE model of a fuel rod-to-support system is produced with shell and contact elements. The spring hold-down force is calculated using the contact pressure obtained from the FE model. Experiment has also been conducted in the same environment for the measurement of this force. The spring hold-down force values obtained from both studies are compared, which show good agreement, and in turn confirm the validation of this analysis. The Stress obtained through this analysis is less than the yield strength of spacer grid material (Inconel-718), thus fulfils the structural integrity criteria of grid.

  19. Fuel rod-to-support contact pressure and stress measurement for CHASNUPP-1(PWR) fuel

    Energy Technology Data Exchange (ETDEWEB)

    Waseem, E-mail: wazim_me@hotmail.co [Directorate General Nuclear Power Fuel, Pakistan Atomic Energy Commission, P.O. Box No. 1847, Islamabad 44000 (Pakistan); Elahi, N.; Siddiqui, A.; Murtaza, G. [Directorate General Nuclear Power Fuel, Pakistan Atomic Energy Commission, P.O. Box No. 1847, Islamabad 44000 (Pakistan)

    2011-01-15

    Research highlights: A detailed finite element model of spacer grid cell with fuel rod-to-support has been developed to determine the contact pressure between the supports of the grid and fuel rod cladding. The spring hold-down force is calculated using the contact pressure obtained from the FE model. Experiment has also been conducted in the same environment for the measurement of this force. The spring hold-down force values obtained from both studies confirm the validation of this analysis. The stress obtained through this analysis is less than the yield strength of spacer grid material, thus fulfils the structural integrity criteria of grid. - Abstract: This analysis has been made in an attempt to measure the contact pressure of the PWR fuel assembly spacer grid spring and to verify its structural integrity at room temperature in air. A detailed finite element (FE) model of spacer grid cell with fuel rod-to-support has been developed to determine the contact pressure between the supports of the grid and fuel rod cladding. The FE model of a fuel rod-to-support system is produced with shell and contact elements. The spring hold-down force is calculated using the contact pressure obtained from the FE model. Experiment has also been conducted in the same environment for the measurement of this force. The spring hold-down force values obtained from both studies are compared, which show good agreement, and in turn confirm the validation of this analysis. The Stress obtained through this analysis is less than the yield strength of spacer grid material (Inconel-718), thus fulfils the structural integrity criteria of grid.

  20. Investigation of the properties of indium tin oxide-organic contacts for optoelectronic applications

    Energy Technology Data Exchange (ETDEWEB)

    Stanculescu, A. [National Institute of Materials Physics, 105 bis Atomistilor Street, P.O. Box MG-7, Bucharest-Magurele 077125 (Romania)], E-mail: sanca@infim.ro; Stanculescu, F. [University of Bucharest, Faculty of Physics, 405 Atomistilor Street, P.O. Box MG-11, Bucharest-Magurele 077125 (Romania)

    2007-10-15

    This paper presents some investigations on the electrical transport properties of ITO/single (double) layer organic semiconductor (m-DNB, benzil, PTCDA, Alq3) contacts in SIS-like (ITO/organic/Si) and MIS-like (ITO/organic/metal) heterostructures. The I-V characteristics have emphasised the injection properties of different contacts and the effect of space charge limited currents in correlation with the type and preparation conditions of the contacts. We have studied the influence of the type of contact (In/ITO; In/Al) on the electrical conduction in Alq3/PTCDA/Si/In heterostructure. In a planar grid contact configuration for In/Al/PTCDA/Al/In structure we have observed the effect of the low electric field on the shape of the I-V characteristic.

  1. Viscoelastic reciprocating contacts in presence of finite rough interfaces: A numerical investigation

    Science.gov (United States)

    Putignano, Carmine; Carbone, Giuseppe

    2018-05-01

    Viscoelastic reciprocating contacts are crucial in a number of systems, ranging from sealing components to viscoelastic dampers. Roughness plays in these conditions a central role, but no exhaustive assessment in terms of influence on area, separation and friction has been drawn so far. This is due to the huge number of time and space scales involved in the problem. By means of an innovative Boundary Element methodology, which treats the time as a parameter and then requires only to discretize the space domain, we investigate the viscoelastic reciprocating contact mechanics between rough solids. In particular, we consider the alternate contact of a rigid finite-size rough punch over a viscoelastic layer: the importance of the domain finiteness in the determination of the contact area and the contact solution anisotropy is enlightened. Implications on real system may be drawn on this basis. Finally, we focus on the hysteretic cycle related to the viscoelastic tangential forces.

  2. Loading and Contact Stress Analysis on the Thread Teeth in Tubing and Casing Premium Threaded Connection

    Directory of Open Access Journals (Sweden)

    Honglin Xu

    2014-01-01

    Full Text Available Loading and contact stress distribution on the thread teeth in tubing and casing premium threaded connections are of great importance for design optimization, pretightening force control, and thread failure prevention. This paper proposes an analytical method based on the elastic mechanics. This is quite different from other papers, which mainly rely on finite element analysis. The differential equation of load distribution on the thread teeth was established according to equal pitch of the engaged thread after deformation and solved by finite difference method. Furthermore, the relation between load acting on each engaged thread and mean contact stress on its load flank is set up based on the geometric description of thread surface. By comparison, this new analytical method with the finite element analysis for a modified API 177.8 mm premium threaded connection is approved. Comparison of the contact stress on the last engaged thread between analytical model and FEM shows that the accuracy of analytical model will decline with the increase of pretightening force after the material enters into plastic deformation. However, the analytical method can meet the needs of engineering to some extent because its relative error is about 6.2%~18.1% for the in-service level of pretightening force.

  3. Predicting guar seed splitting by compression between two plates using Hertz theory of contact stresses.

    Science.gov (United States)

    Vishwakarma, R K; Shivhare, U S; Nanda, S K

    2012-09-01

    Hertz's theory of contact stresses was applied to predict the splitting of guar seeds during uni-axial compressive loading between 2 rigid parallel plates. The apparent modulus of elasticity of guar seeds varied between 296.18 and 116.19 MPa when force was applied normal to hilum joint (horizontal position), whereas it varied between 171.86 and 54.18 MPa when force was applied in the direction of hilum joint (vertical position) with in moisture content range of 5.16% to 15.28% (d.b.). At higher moisture contents, the seeds yielded after considerable deformation, thus showing ductile nature. Distribution of stresses below the point of contact were plotted to predict the location of critical point, which was found at 0.44 to 0.64 mm and 0.37 to 0.53 mm below the contact point in vertical and horizontal loading, respectively, depending upon moisture content. The separation of cotyledons from each other initiated before yielding of cotyledons and thus splitting of seed took place. The relationships between apparent modulus of elasticity, principal stresses with moisture content were described using second-order polynomial equations and validated experimentally. Manufacture of guar gum powder requires dehulling and splitting of guar seeds. This article describes splitting behavior of guar seeds under compressive loading. Results of this study may be used for design of dehulling and splitting systems of guar seeds. © 2012 Institute of Food Technologists®

  4. Investigation of the Dynamic Contact Angle Using a Direct Numerical Simulation Method.

    Science.gov (United States)

    Zhu, Guangpu; Yao, Jun; Zhang, Lei; Sun, Hai; Li, Aifen; Shams, Bilal

    2016-11-15

    A large amount of residual oil, which exists as isolated oil slugs, remains trapped in reservoirs after water flooding. Numerous numerical studies are performed to investigate the fundamental flow mechanism of oil slugs to improve flooding efficiency. Dynamic contact angle models are usually introduced to simulate an accurate contact angle and meniscus displacement of oil slugs under a high capillary number. Nevertheless, in the oil slug flow simulation process, it is unnecessary to introduce the dynamic contact angle model because of a negligible change in the meniscus displacement after using the dynamic contact angle model when the capillary number is small. Therefore, a critical capillary number should be introduced to judge whether the dynamic contact model should be incorporated into simulations. In this study, a direct numerical simulation method is employed to simulate the oil slug flow in a capillary tube at the pore scale. The position of the interface between water and the oil slug is determined using the phase-field method. The capacity and accuracy of the model are validated using a classical benchmark: a dynamic capillary filling process. Then, different dynamic contact angle models and the factors that affect the dynamic contact angle are analyzed. The meniscus displacements of oil slugs with a dynamic contact angle and a static contact angle (SCA) are obtained during simulations, and the relative error between them is calculated automatically. The relative error limit has been defined to be 5%, beyond which the dynamic contact angle model needs to be incorporated into the simulation to approach the realistic displacement. Thus, the desired critical capillary number can be determined. A three-dimensional universal chart of critical capillary number, which functions as static contact angle and viscosity ratio, is given to provide a guideline for oil slug simulation. Also, a fitting formula is presented for ease of use.

  5. Stress-in-motion (SIM) - tyre/road interface contact stresses

    CSIR Research Space (South Africa)

    De Beer, Morris

    2012-06-01

    Full Text Available Tyre or road interface stresses are those induced by vehicular traffic running on roads, and are the primary cause of surfacing problems. The cost of asphalt layers is often the most significant in road construction and maintenance work...

  6. Stress Regression Analysis of Asphalt Concrete Deck Pavement Based on Orthogonal Experimental Design and Interlayer Contact

    Science.gov (United States)

    Wang, Xuntao; Feng, Jianhu; Wang, Hu; Hong, Shidi; Zheng, Supei

    2018-03-01

    A three-dimensional finite element box girder bridge and its asphalt concrete deck pavement were established by ANSYS software, and the interlayer bonding condition of asphalt concrete deck pavement was assumed to be contact bonding condition. Orthogonal experimental design is used to arrange the testing plans of material parameters, and an evaluation of the effect of different material parameters in the mechanical response of asphalt concrete surface layer was conducted by multiple linear regression model and using the results from the finite element analysis. Results indicated that stress regression equations can well predict the stress of the asphalt concrete surface layer, and elastic modulus of waterproof layer has a significant influence on stress values of asphalt concrete surface layer.

  7. Concerns about Appearing Prejudiced Get Under the Skin: Stress Responses to Interracial Contact in the Moment and across Time.

    Science.gov (United States)

    Trawalter, Sophie; Adam, Emma K; Chase-Lansdale, P Lindsay; Richeson, Jennifer A

    2012-05-01

    Many White Americans are concerned about appearing prejudiced. How these concerns affect responses during actual interracial interactions, however, remains understudied. The present work examines stress responses to interracial contact-both in the moment, during interracial interactions (Study 1), and over time as individuals have repeated interracial contact (Study 2). Results of Study 1 revealed that concerns about appearing prejudiced were associated with heightened stress responses during interracial encounters (Study 1). White participants concerned about appearing prejudiced exhibited significant increases in cortisol "stress hormone" levels as well as increases in anxious behavior during interracial but not same-race contact. Participants relatively unconcerned about appearing prejudiced did not exhibit these stress responses. Study 2 examined stress responses to interracial contact over an entire academic year. Results revealed that White participants exhibited shifts in cortisol diurnal rhythms on days after interracial contact. Moreover, participants' cortisol rhythms across the academic year, from fall to spring, were related to their concerns about appearing prejudiced and their interracial contact experiences. Taken together, these data offer the first evidence that chronic concerns about appearing prejudiced are related to short- and longer-term stress responses to interracial contact. Implications for life in diverse spaces are discussed.

  8. Investigation of surface porosity measurements and compaction pressure as means to ensure consistent contact angle determinations

    DEFF Research Database (Denmark)

    Holm, René; Borkenfelt, Simon; Allesø, Morten

    2016-01-01

    for a compound is determined by its contact angle to a liquid, which in the present study was measured using the sessile drop method applied to a disc compact of the compound. Precise determination of the contact angle is important should it be used to either rank compounds or selected excipients to e.......g. increase the wetting from a solid dosage form. Since surface roughness of the compact has been suggested to influence the measurement this study investigated if the surface quality, in terms of surface porosity, had an influence on the measured contact angle. A correlation to surface porosity was observed......, however for six out of seven compounds similar results were obtained by applying a standard pressure (866MPa) to the discs in their preparation. The data presented in the present work therefore suggest that a constant high pressure should be sufficient for most compounds when determining the contact angle...

  9. Investigations into the thermal non-equilibrium of W UMa-type contact binaries

    Science.gov (United States)

    Xiong, Xiao; Liu, Liang; Qian, Sheng-Bang

    2018-05-01

    Traditionally, some physical details (e.g., magnetic braking, energy transfer, angular momentum loss, etc.) have to be taken into consideration during investigations into the evolution of contact binaries. However, the real evolutionary processes which usually contain several of these physical mechanisms are very complicated as a result of strong interaction between components. To avoid dealing with these factors, a linear relationship is applied to the temperatures of components. It is found that the higher the mass ratio (M 2/M 1) of a contact system, the weaker the deviation from thermal equilibrium. On this basis, a variation trend of fill-out factor (f) changing with mass ratio can be inferred, which is consistent with observations. Moreover, if we stick to this point of view, it should be natural that the number of semi-detached binaries in the predicted broken-contact phase of relaxation oscillations is less than the number in the contact phase.

  10. Role of contact couples and couple stress in the behaviour of granular media

    International Nuclear Information System (INIS)

    Dedecker, F.; Dubujet, P.; Cambou, B.

    1998-01-01

    This paper analyses the interest of taking into account contact couples in the granular material description as well as considering the inadequacy of the micropolar description. The study is made on two types of samples: one which takes into account contact couples, and the other which does not. The response of these two media, which are submitted to a biaxial test, is analysed from both the micromechanic and macroscopic viewpoints. A numerical study which is performed on these two samples shows the influence of the presence of couples on the local static variables as well as on the macroscopic behaviour. A statistical homogenization approach is analysed to simulate the effects of couples. Due to the presence of an internal variable, a numerical study proves that this approach is relevant. This internal variable allows the taking into consideration of the influence of contact couples. A first step in the description of couples versus contact orientation is made by the introduction of the standard deviation. Finally, the inadequacy of the micropolar description which takes into account micropolar stresses is pointed out. (orig.)

  11. Towards using tire-road contact stresses in pavement design and analysis

    CSIR Research Space (South Africa)

    De Beer, Morris

    2011-09-01

    Full Text Available stream_source_info De Beer_2012.pdf.txt stream_content_type text/plain stream_size 79981 Content-Encoding ISO-8859-1 stream_name De Beer_2012.pdf.txt Content-Type text/plain; charset=ISO-8859-1 Towards Using Tire...-Road Contact Stresses in Pavement Design and Analysis M. De Beer*, J. W. Maina, Y. van Rensburg, J. M. Greben mbeer@csir.co.za CSIR Built Environment P O Box 395 Pretoria 0001 South Africa Presented at the September 2011 Meeting...

  12. Investigations of metal contacts to amorphous evaporated Ge films and amorphous sputtered Si films

    International Nuclear Information System (INIS)

    Hafiz, M.; Mgbenu, E.; Tove, P.A.; Norde, H.; Petersson, S.

    1976-02-01

    Amorphous Ge or Si films have been used as ohmic contacts to high-resistivity n-silicon radiation detectors. One interesting property of this contact is that it does not inject minority carriers even when the depletion region extends up to the contact thus generating an extracting field there. The function of this contact is not yet fully explored. One part problem is the role of the metal films used as external contacts to the amorphous film. In this report the function of different contacting metals, such as Au, Al, Cr are investigated by measuring the I-V-characteristics of sandwich structures with two metals on both sides of the amorphous evaporated (Ge) and sputtered (Si) film (of typical thickness 1000 A). It was found that while the symmetric structures Au-αGe-Au and Cr-αGe-Cr were low-resistive (leading to resistivity values of approximately 10 5 Ωcm for the αGe film), Al-αGe-Al structures showed much higher resistance and were also polarity dependent. The former feature was found also for unsymmetric structures, i.e. Cr-αGe-Au, Cr-αGe-Al. (Auth.)

  13. Enhancement to Non-Contacting Stress Measurement of Blade Vibration Frequency

    Science.gov (United States)

    Platt, Michael; Jagodnik, John

    2011-01-01

    A system for turbo machinery blade vibration has been developed that combines time-of-arrival sensors for blade vibration amplitude measurement and radar sensors for vibration frequency and mode identification. The enabling technology for this continuous blade monitoring system is the radar sensor, which provides a continuous time series of blade displacement over a portion of a revolution. This allows the data reduction algorithms to directly calculate the blade vibration frequency and to correctly identify the active modes of vibration. The work in this project represents a significant enhancement in the mode identification and stress calculation accuracy in non-contacting stress measurement system (NSMS) technology when compared to time-of-arrival measurements alone.

  14. Evaluation of a large-scale tuberculosis contact investigation in the Netherlands

    NARCIS (Netherlands)

    Borgen, K.; Koster, B.; Meijer, H.; Kuyvenhoven, V.; van der Sande, M.; Cobelens, F.

    2008-01-01

    The aim of the present study was to evaluate yield and effectiveness of a large-scale contact investigation around a supermarket employee with infectious tuberculosis. Supermarket customers were screened by tuberculin skin test (TST) and/or radiography, depending on individual characteristics. The

  15. Economics of United States tuberculosis airline contact investigation policies: a return on investment analysis.

    Science.gov (United States)

    Coleman, Margaret S; Marienau, Karen J; Marano, Nina; Marks, Suzanne M; Cetron, Martin S

    2014-01-01

    In 2011, the Centers for Disease Control and Prevention modified its 2008 protocol for flight-related tuberculosis contact investigation initiation. The 2011 Modified protocol was implemented and replaced the 2008 CDC protocol based on comparative epidemiologic and economic analyses; this publication reports the economic analysis results. A return on investment model compared relative changes in tuberculosis disease treatment costs resulting from expenditures on tuberculosis contact investigations and latent tuberculosis infection treatment for the 2008 CDC and Modified protocols. At moderate/high rates of latent tuberculosis infection and tuberculosis disease, positive returns on investment indicated each $1.00 spent on tuberculosis contact investigations and latent tuberculosis treatment resulted in more than $1.00 of savings from reduced tuberculosis disease treatment costs. Low rates of latent tuberculosis infection and tuberculosis disease resulted in negative returns on investment, indicating economic losses from tuberculosis disease treatment costs. There were smaller economic losses at low latent tuberculosis infection and tuberculosis disease rates with the Modified protocol in comparison to the 2008 CDC protocol, while both identified comparable numbers of persons at risk for tuberculosis. The Modified protocol for conducting flight-related tuberculosis contact investigations represents a better use of resources and protects public health. Published by Elsevier Ltd.

  16. Evaluation of Spur Gear Pair on Tooth Root Bending Stress in Radial Misalignment Contact Condition

    Directory of Open Access Journals (Sweden)

    Lias M.R.

    2014-07-01

    Full Text Available This paper evaluates the effects of radial misalignment contact on the tooth root bending stress values of spur gear pair during the gear meshing cycle. Radial misalignment (H is denoted as the deviation of the pinion nominal position with respect to the gear tooth along the pinion axis to the gear which happened from manufacturing assembly errors (AE. A model based on involute 3D parametric CAD geometry, of spur gear design ISO 6336:2006 is analysed with allowable AE values from minimum 10μm to maximum 40μm with Finite-Element Method (FEM model based methodology using a dynamics module from ANSYS. Main parameters of interest are the Tooth root bending stress (TRBS in H condition with AE along the critical region with respect to face width of pinion-gear section. A comparison between standard High point single tooth contact models (HPSTC to this model showed a good agreement that H with AE had great influence on TRBS as the values’ increase. Radial misalignment influence factor (RMIF was introduced as indication of TRBS values in consideration of H due to AE shows and inverted patterns higher for pinion, give a good justification that the pinion is weaker compared to the gear.

  17. Investigation on Plasma Jet Flow Phenomena During DC Air Arc Motion in Bridge-Type Contacts

    Science.gov (United States)

    Zhai, Guofu; Bo, Kai; Chen, Mo; Zhou, Xue; Qiao, Xinlei

    2016-05-01

    Arc plasma jet flow in the air was investigated under a bridge-type contacts in a DC 270 V resistive circuit. We characterized the arc plasma jet flow appearance at different currents by using high-speed photography, and two polished contacts were used to search for the relationship between roughness and plasma jet flow. Then, to make the nature of arc plasma jet flow phenomena clear, a simplified model based on magnetohydrodynamic (MHD) theory was established and calculated. The simulated DC arc plasma was presented with the temperature distribution and the current density distribution. Furthermore, the calculated arc flow velocity field showed that the circular vortex was an embodiment of the arc plasma jet flow progress. The combined action of volume force and contact surface was the main reason of the arc jet flow. supported by National Natural Science Foundation of China (Nos. 51307030, 51277038)

  18. Investigation of surface porosity measurements and compaction pressure as means to ensure consistent contact angle determinations.

    Science.gov (United States)

    Holm, René; Borkenfelt, Simon; Allesø, Morten; Andersen, Jens Enevold Thaulov; Beato, Stefania; Holm, Per

    2016-02-10

    Compounds wettability is critical for a number of central processes including disintegration, dispersion, solubilisation and dissolution. It is therefore an important optimisation parameter both in drug discovery but also as guidance for formulation selection and optimisation. Wettability for a compound is determined by its contact angle to a liquid, which in the present study was measured using the sessile drop method applied to a disc compact of the compound. Precise determination of the contact angle is important should it be used to either rank compounds or selected excipients to e.g. increase the wetting from a solid dosage form. Since surface roughness of the compact has been suggested to influence the measurement this study investigated if the surface quality, in terms of surface porosity, had an influence on the measured contact angle. A correlation to surface porosity was observed, however for six out of seven compounds similar results were obtained by applying a standard pressure (866 MPa) to the discs in their preparation. The data presented in the present work therefore suggest that a constant high pressure should be sufficient for most compounds when determining the contact angle. Only for special cases where compounds have poor compressibility would there be a need for a surface-quality-control step before the contact angle determination. Copyright © 2015 Elsevier B.V. All rights reserved.

  19. Experimental investigation on the initial expansion stage of vacuum arc on cup-shaped TMF contacts

    Science.gov (United States)

    Wang, Ting; Xiu, Shixin; Liu, Zixi; Zhang, Yanzhe; Feng, Dingyu

    2018-02-01

    Arc behavior and measures to control it directly affect the properties of vacuum circuit breakers. Nowadays, transverse magnetic field (TMF) contacts are widely used for medium voltages. A magnetic field perpendicular to the current direction between the TMF contacts makes the arc move, transmitting its energy to the whole contact and avoiding excessive local ablation. Previous research on TMF arc behavior concentrated mainly on the arc movement and less on the initial stage (from arc ignition to an unstable arc column). A significant amount of experiment results suggest that there is a short period of arc stagnation after ignition. The duration of this arc stagnation and the arc characteristics during this stage affect the subsequent arc motion and even the breaking property of interrupters. The present study is of the arc characteristics in the initial stage. Experiments were carried out in a demountable vacuum chamber with cup-shaped TMF contacts. Using a high-speed camera, both single-point arc ignition mode and multiple-point arc ignition (MPAI) mode were observed. The experimental data show that the probability of MPAI mode occurring is related to the arc current. The influences of arc-ignition mode, arc current, and contact diameter on the initial expansion process were investigated. In addition, simulations were performed to analyze the multiple arc expansion process mechanically. Based on the experimental phenomena and simulation results, the mechanism of the arc expansion motion was analyzed.

  20. Development of a high hertz-stress contact for conventional batch production using a unique scribing technology

    International Nuclear Information System (INIS)

    Bhuiyan, M M I; Alamgir, T; Bhuiyan, M; Kajihara, M

    2013-01-01

    Gradually the electronic devices are getting more compact dimension with respect to the width and thickness. As a result, the contacts are becoming thinner and which leads the contact to be loose and unstable contact. In comercial stamping methode, connector tip diameter should be more than 300μm due to its size limitation. Consequently, the connector contact resistance is becoming higher due to weak contact force. To overcome this problem there were few more basic research using MEMS and Electro Fine Forming (EFF) technology to make high Hertz-Stress Contact (5μm) due to the limitation in the commercial stamping process and the result was in satisfactory level. However, since the MEMS and EFF fabrication is costly therefore, a new method is introduced in this paper using the commercial Phosphor Bronze stamping method to reduce the production cost. Moreover, scribing method is used to make tip on the contact. Accordingly, more compact fine pitch contact is successfully fabricated and tested with 5μm High Hertz Stress without using the MEMS and EFF technology. Hence the manufactured contact resistance becomes less than 20mΩ ±5mΩ

  1. Investigation of aluminium ohmic contacts to n-type GaN grown by molecular beam epitaxy

    Science.gov (United States)

    Kribes, Y.; Harrison, I.; Tuck, B.; Kim, K. S.; Cheng, T. S.; Foxon, C. T.

    1997-11-01

    Using epi-layers of different doping concentrations, we have investigated aluminium contacts on n-type gallium nitride grown by plasma source molecular beam epitaxy. To achieve repeatable and reliable results it was found that the semiconductor needed to be etched in aqua-regia before the deposition of the contact metallization. Scanning electron micrographs of the semiconductor surface show a deterioration of the semiconductor surface on etching. The specific contact resistivity of the etched samples were, however, superior. Annealing the contacts at 0268-1242/12/11/030/img9 produced contacts with the lowest specific contact resistance of 0268-1242/12/11/030/img10. The long-term aging of these contacts was also investigated. The contacts and the sheet resistance were both found to deteriorate over a three-month period.

  2. Investigation of ITO layers for application as transparent contacts in flexible photovoltaic cell structures

    Science.gov (United States)

    Znajdek, Katarzyna; Sibiński, Maciej

    2013-07-01

    In this paper authors present the mechanical, optical and electrical parameters of Indium Tin Oxide (ITO) Transparent Conductive Layers (TCL) deposited on flexible substrate. Layers' properties are analyzed and verified. Investigated Transparent Conductive Oxide (TCO) was deposited, using magnetron sputtering method. Flexible polymer PET (polyethylene terephthalate) foil was used as a substrate, in order to photovoltaic (PV) cell's emitter contact application of investigated material. ITO-coated PET foils have been dynamically bent on numerous cylinders of various diameters according to the standard requirements. Resistance changes for each measured sample were measured and recorded during bending cycle. Thermal durability, as well as temperature influence on resistance and optical transmission are verified. Presented results were conducted to verify practical suitability and to evaluate possible applications of Indium Tin Oxide as a front contact in flexible photovoltaic cell structures.

  3. Separately contacted edge states: A new spectroscopic tool for the investigation of the quantum Hall effect

    OpenAIRE

    Wuertz, A.; Wildfeuer, R.; Lorke, A.; Deviatov, E. V.; Dolgopolov, V. T.

    2001-01-01

    Using an innovative combination of a quasi-Corbino sample geometry and the cross-gate technique, we have developed a method that enables us to separately contact single edge channels in the quantum Hall regime and investigate equilibration among them. Performing 4-point resistance measurements, we directly obtain information on the energetic and geometric structure of the edge region and the equilibration-length for current transport across the Landau- as well as the spin-gap. Based on an alm...

  4. An investigation of highly accurate and precise robotic hole measurements using non-contact devices

    Directory of Open Access Journals (Sweden)

    Usman Zahid

    2016-01-01

    Full Text Available Industrial robots arms are widely used in manufacturing industry because of their support for automation. However, in metrology, robots have had limited application due to their insufficient accuracy. Even using error compensation and calibration methods, robots are not effective for micrometre (μm level metrology. Non-contact measurement devices can potentially enable the use of robots for highly accurate metrology. However, the use of such devices on robots has not been investigated. The research work reported in this paper explores the use of different non-contact measurement devices on an industrial robot. The aim is to experimentally investigate the effects of robot movements on the accuracy and precision of measurements. The focus has been on assessing the ability to accurately measure various geometric and surface parameters of holes despite the inherent inaccuracies of industrial robot. This involves the measurement of diameter, roundness and surface roughness. The study also includes scanning of holes for measuring internal features such as start and end point of a taper. Two different non-contact measurement devices based on different technologies are investigated. Furthermore, effects of eccentricity, vibrations and thermal variations are also assessed. The research contributes towards the use of robots for highly accurate and precise robotic metrology.

  5. Late dislocation of rotating platform in New Jersey Low-Contact Stress knee prosthesis.

    Science.gov (United States)

    Huang, Chun-Hsiung; Ma, Hon-Ming; Liau, Jiann-Jong; Ho, Fang-Yuan; Cheng, Cheng-Kung

    2002-12-01

    Five patients with late rotational dislocation of the rotating platform bearing in the New Jersey Low-Contact Stress total knee arthroplasty are reported. The prostheses had functioned well for 8 to 12 years before failure. Preoperative radiographs showed asymmetric femorotibial joint spaces. Entrapment of the dislocated bearing in three patients and spontaneous reduction of the dislocated bearing in another two patients were seen at revision. Femorotibial ligamentous instability was found after reduction. The retrieved polyethylene bearings showed advanced wear and cold flow deformities and the thickness was reduced. The revision arthroplasty was accomplished by replacement with a thicker bearing element. Progressive femorotibial ligament laxity and reduction of the thickness of polyethylene with wearing break down the originally well-balanced soft tissue tension of the knee. The rotational degree of the rotating platform bearing is unrestricted, which may result in late dislocation. Polyethylene wear is unavoidable in knee prostheses using metal contact with polyethylene even with a mobile-bearing design. Efforts to reduce polyethylene wear are mandatory.

  6. Investigation of the effect of water exposed to nonequilibrium contact plasma onto saccharomyces cerevisiae yeast

    Directory of Open Access Journals (Sweden)

    S. Mykolenko

    2015-05-01

    Full Text Available Introduction. Additional treatment of water by nonequilibrium contact plasma allows improving consumer characteristics of bakery goods considerably. Determination of the effect of plasma-chemically activated water on morphological, cultural and physiological properties of Saccharomyces cerevisiae yeast is important from the technological point of view. Materials and Methods. Experimental investigations were carried out in the conditions of bacteriological laboratory by seeding the culture of yeasts of ТМ “Lvivski” and “Kryvorizki” on Sabouraud dense liquid nutrient media. The quantity of viable cells of microorganisms was determined by the method of Gould sector seeds. Morphology of the yeast was investigated by phase-contrast microscopy. Biotechnological properties of yeasts were determined on Giss media. Results. The paper establishes the effect of water exposed to nonequilibrium contact plasma on the sensitivity of Saccharomyces cerevisiae and shows absence of suppressive action of treated water with regard to cultural properties of microorganisms. The experiments prove that with the use of plasma-chemically activated water morphological characteristics and biochemical properties of bakery yeasts produced by Lviv and Kryvyi Rig yeast plants are preserved. Culturing of Saccharomyces cerevisiae yeast on the nutrient media prepared with the use of water exposed to nonequilibrium contact plasm resulted in 6,5–15 times’ increase in quantity of viable microorganisms compared with the control on the mains drinking water. Conclusions. Physiological properties of Saccharomyces cerevisiae yeast improved owing to use water exposed to nonequilibrium contact plasma. Results of investigations are recommended for using in yeast production and bread making.

  7. An fMRI investigation of the impact of interracial contact on executive function.

    Science.gov (United States)

    Richeson, Jennifer A; Baird, Abigail A; Gordon, Heather L; Heatherton, Todd F; Wyland, Carrie L; Trawalter, Sophie; Shelton, J Nicole

    2003-12-01

    We investigated whether individual differences in racial bias among white participants predict the recruitment, and potential depletion, of executive attentional resources during contact with black individuals. White individuals completed an unobtrusive measure of racial bias, then interacted with a black individual, and finally completed an ostensibly unrelated Stroop color-naming test. In a separate functional magnetic resonance imaging (fMRI) session, subjects were presented with unfamiliar black male faces, and the activity of brain regions thought to be critical to executive control was assessed. We found that racial bias predicted activity in right dorsolateral prefrontal cortex (DLPFC) in response to black faces. Furthermore, activity in this region predicted Stroop interference after an actual interracial interaction, and it statistically mediated the relation between racial bias and Stroop interference. These results are consistent with a resource depletion account of the temporary executive dysfunction seen in racially biased individuals after interracial contact.

  8. Comparison of the Contact stress and friction behavior of SiC and ZrO2 materials

    International Nuclear Information System (INIS)

    Lindberg, L.J.; Richerson, D.W.

    1985-01-01

    Studies were performed to further elucidate the friction and contact- stress characteristics of structural ceramic materials. New data for fully stabilized and partially stabilized zirconia ceramics are compared with prior test results for sintered SiC. The comparison provides further evidence that the high temperature friction characteristics of sinstered SiC are strongly influenced by the presence of a viscous surface layer. The results also show that a ceramic material with lower coefficient of friction and higher fracture toughness has increased resistance to strength-reducing surface damage due to contact stress

  9. Modern contact investigation methods for enhancing tuberculosis control in Aboriginal communities

    Directory of Open Access Journals (Sweden)

    Victoria J. Cook

    2012-05-01

    Full Text Available The Aboriginal communities in Canada are challenged by a disproportionate burden of TB infection and disease. Contact investigation (CI guidelines exist but these strategies do not take into account the unique social structure of different populations. Because of the limitations of traditional CI, new approaches are under investigation and include the use of social network analysis, geographic information systems and genomics, in addition to the widespread use of genotyping to better understand TB transmission. Guidelines for the routine use of network methods and other novel methodologies for TB CI and outbreak investigation do not exist despite the gathering evidence that these approaches can positively impact TB control efforts, even in Aboriginal communities. The feasibility and efficacy of these novel approaches to CI in Aboriginal communities requires further investigation. The successful integration of these novel methodologies will require community involvement, capacity building and ongoing support at every level. The outcome will not only be the systematic collection, analysis, and interpretation of CI data in high-burden communities to assess transmission but the prioritization of contacts who are candidates for treatment of LTBI which will break the cycle of transmission. Ultimately, the measure of success will be a clear and sustained decline in TB incidence in Aboriginal communities.

  10. Concerns about Appearing Prejudiced Get Under the Skin: Stress Responses to Interracial Contact in the Moment and across Time

    OpenAIRE

    Trawalter, Sophie; Adam, Emma K.; Chase-Lansdale, P. Lindsay; Richeson, Jennifer A.

    2012-01-01

    Many White Americans are concerned about appearing prejudiced. How these concerns affect responses during actual interracial interactions, however, remains understudied. The present work examines stress responses to interracial contact—both in the moment, during interracial interactions (Study 1), and over time as individuals have repeated interracial contact (Study 2). Results of Study 1 revealed that concerns about appearing prejudiced were associated with heightened stress responses during...

  11. Laboratory Investigation of Contact Freezing and the Aerosol to Ice Crystal Transformation Process

    Energy Technology Data Exchange (ETDEWEB)

    Shaw, Raymond A. [Michigan Technological Univ., Houghton, MI (United States)

    2014-10-28

    This project has been focused on the following objectives: 1. Investigations of the physical processes governing immersion versus contact nucleation, specifically surface-induced crystallization; 2. Development of a quadrupole particle trap with full thermodynamic control over the temperature range 0 to –40 °C and precisely controlled water vapor saturation ratios for continuous, single-particle measurement of the aerosol to ice crystal transformation process for realistic ice nuclei; 3. Understanding the role of ice nucleation in determining the microphysical properties of mixed-phase clouds, within a framework that allows bridging between laboratory and field measurements.

  12. Investigation of electrochemical intrusion of cations by the method of contact electric resistance

    International Nuclear Information System (INIS)

    Marichev, V.A.

    1997-01-01

    Paper shows the possibility and prospects of application of contact electric resistance technique (CER) to study in-situ the initial stages of electrochemical admission of cations (ECA). ECA is shown to increase CER of metals. It enables to determine ECA potential and to investigate kinetics of this process. Using ECA in copper, silver and zinc from alkali solutions as an example one has shown that CER technique enables to obtain results that do not contradict well-known published data. Potentials of ECA cations from acid and neutral solutions in copper, platinum, iron, titanium and tungsten are determined

  13. The loaded surface profile: a new technique for the investigation of contact surfaces

    OpenAIRE

    McBride, J.W.

    2006-01-01

    Contact between rough surfaces produces a complex contact profile. The contact area is usually estimated according to roughness statistics in conjunction withsurface models or by examining the surfaces before and after contact. Most of the existing literature on loaded surface profiles is theoretical or numerical in nature. This paper presents a methodology for a new system to measure the loaded surface profile, based on a non-contact 3D laser profiler. The system allows the measurement of...

  14. Effect of cup inclination on predicted contact stress-induced volumetric wear in total hip replacement.

    Science.gov (United States)

    Rijavec, B; Košak, R; Daniel, M; Kralj-Iglič, V; Dolinar, D

    2015-01-01

    In order to increase the lifetime of the total hip endoprosthesis, it is necessary to understand mechanisms leading to its failure. In this work, we address volumetric wear of the artificial cup, in particular the effect of its inclination with respect to the vertical. Volumetric wear was calculated by using mathematical models for resultant hip force, contact stress and penetration of the prosthesis head into the cup. Relevance of the dependence of volumetric wear on inclination of the cup (its abduction angle ϑA) was assessed by the results of 95 hips with implanted endoprosthesis. Geometrical parameters obtained from standard antero-posterior radiographs were taken as input data. Volumetric wear decreases with increasing cup abduction angle ϑA. The correlation within the population of 95 hips was statistically significant (P = 0.006). Large cup abduction angle minimises predicted volumetric wear but may increase the risk for dislocation of the artificial head from the cup in the one-legged stance. Cup abduction angle and direction of the resultant hip force may compensate each other to achieve optimal position of the cup with respect to wear and dislocation in the one-legged stance for a particular patient.

  15. Hardiness and the response to stressful situations: Investigating mediating processes

    NARCIS (Netherlands)

    Delahaij, R.; Gaillard, A.W.K.; Dam, K. van

    2010-01-01

    The present study investigated mediating processes that explain how hardiness influences the way people respond to a stressful situation. Coping style and coping self-efficacy were investigated as mediating variables. Using a longitudinal design, hardiness, coping style and coping self-efficacy, and

  16. Opening wedge trapezial osteotomy as possible treatment for early trapeziometacarpal osteoarthritis: a biomechanical investigation of radial subluxation, contact area, and contact pressure.

    Science.gov (United States)

    Cheema, Tahseen; Salas, Christina; Morrell, Nathan; Lansing, Letitia; Reda Taha, Mahmoud M; Mercer, Deana

    2012-04-01

    Radial subluxation and cartilage thinning have been associated with initiation and accelerated development of osteoarthritis of the trapeziometacarpal joint. Few investigators have reported on the benefits of opening wedge trapezial osteotomy for altering the contact mechanics of the trapeziometacarpal joint as a possible deterrent to the initiation or progression of osteoarthritis. We used cadaveric specimens to determine whether opening wedge osteotomy of the trapezium was successful in reducing radial subluxation of the metacarpal base and to quantify the contact area and pressure on the trapezial surface during simulated lateral pinch. We used 8 fresh-frozen specimens in this study. The flexor pollicis longus, abductor pollicis longus, adductor pollicis, abductor pollicis brevis, and flexor pollicis brevis/opponens pollicis tendons were each loaded to simulate the thumb in lateral pinch position. We measured radial subluxation from anteroposterior radiographs before and after placement of a 15° wedge. We used real-time sensors to analyze contact pressure and contact area distribution on the trapezium. Center of force in the normal joint under lateral pinch loading was primarily located in the dorsal region of the trapezium. After wedge placement, contact pressure increased in the ulnar-dorsal region by 76%. Mean contact area increased in the ulnar-dorsal region from 0.05 to 0.07 cm(2), and in the ulnar-volar region from 0.003 to 0.024 cm(2). The average reduction in joint subluxation was 64%. The 15° opening wedge osteotomy of the trapezium reduced radial subluxation of the metacarpal on the trapezium and increased contact pressure and contact area away from the diseased compartments of the trapezial surface. Trapezial osteotomy addresses the 2 preeminent theories about the initiation and progression of osteoarthritis. By reducing radial subluxation and altering contact pressure and contact area, trapezial osteotomy may prove an alternative to first

  17. Investigating The Effect Of Job Stress On Performance Of Employees

    OpenAIRE

    Oyungerel Altangerel; Wang Ruimei; Ehsan Elahi; Bayandalai Dash

    2015-01-01

    Abstract This study is conducted to investigate the effect of job stress on job performance. A random sampling technique is used to collect primary data of 120 employees of four telecommunication companies of Mongolia i.e. Mobicom Unitel Skytel and G-mobile. A well-structured questionnaire is utilized to collect relevant data descriptive and logistic analysis is used to estimate and describe the findings of results. It is found that work overload is major reason of stress among employees and ...

  18. Stick–slip boundary friction mode as a second-order phase transition with an inhomogeneous distribution of elastic stress in the contact area

    Directory of Open Access Journals (Sweden)

    Iakov A. Lyashenko

    2017-09-01

    Full Text Available This article presents an investigation of the dynamical contact between two atomically flat surfaces separated by an ultrathin lubricant film. Using a thermodynamic approach we describe the second-order phase transition between two structural states of the lubricant which leads to the stick–slip mode of boundary friction. An analytical description and numerical simulation with radial distributions of the order parameter, stress and strain were performed to investigate the spatial inhomogeneity. It is shown that in the case when the driving device is connected to the upper part of the friction block through an elastic spring, the frequency of the melting/solidification phase transitions increases with time.

  19. Experimental investigation of system effects in stressed-skin elements

    DEFF Research Database (Denmark)

    Dela Stang, B.; Isaksson, T.; Hansson, M.

    What kind of behaviour can be expected from stressed-skin elements at failure? To answer this question was a primary objective of the experimental investigation presented in this report. Systems of 3 roof units, each made of 5 parallel beams, have been tested for load-carrying capacity and behavi......What kind of behaviour can be expected from stressed-skin elements at failure? To answer this question was a primary objective of the experimental investigation presented in this report. Systems of 3 roof units, each made of 5 parallel beams, have been tested for load-carrying capacity...

  20. Stress and sleep reactivity: a prospective investigation of the stress-diathesis model of insomnia.

    Science.gov (United States)

    Drake, Christopher L; Pillai, Vivek; Roth, Thomas

    2014-08-01

    To prospectively assess sleep reactivity as a diathesis of insomnia, and to delineate the interaction between this diathesis and naturalistic stress in the development of insomnia among normal sleepers. Longitudinal. Community-based. 2,316 adults from the Evolution of Pathways to Insomnia Cohort (EPIC) with no history of insomnia or depression (46.8 ± 13.2 y; 60% female). None. Participants reported the number of stressful events they encountered at baseline (Time 1), as well as the level of cognitive intrusion they experienced in response to each stressor. Stressful events (OR = 1.13; P stress-induced cognitive intrusion (OR = 1.61; P stressful events on risk for insomnia (P sleep reactivity significantly increased risk for insomnia (OR = 1.78; P sleep reactivity moderated the effects of stress-induced intrusion (P sleep reactivity. Trait sleep reactivity also constituted a significant risk for depression (OR = 1.67; P sleep reactivity is a significant risk factor for incident insomnia, and that it triggers insomnia by exacerbating the effects of stress-induced intrusion. Sleep reactivity is also a precipitant of depression, as mediated by insomnia. These findings support the stress-diathesis model of insomnia, while highlighting sleep reactivity as an important diathesis. Drake CL, Pillai V, Roth T. Stress and sleep reactivity: a prospective investigation of the stress-diathesis model of insomnia.

  1. Investigation of human body potential measured by a non-contact measuring system.

    Science.gov (United States)

    Ichikawa, Norimitsu

    2016-12-07

    A human body is occasionally electrified in a room. This charged object will be a source of electrostatic accidents, including the malfunction of electronic equipment. Hence, prevention of these accidents is required. Accidents occasionally occur, even though antistatic clothes and shoes are used. One of the causes for these accidents is that there is a lack of the preventive measures. This situation occurs when using, for example, unconductive wax. In this study, human body potential (voltage) is measured using a non-contact measuring system. An investigation of the human body's voltage when using this system is conducted. The result demonstrates that the voltage of a human body wearing antistatic clothes and shoes or light clothes and slippers exceeds a malfunctioning voltage of a microelectronics device when the body walks on floors. Thus, accidents may occur even if a human body wearing the antistatic clothes walks on flooring. These results will be useful in estimating determination whether electrostatic accidents occur or not.

  2. Numerical investigation of flow field configuration and contact resistance for PEM fuel cell performance

    Energy Technology Data Exchange (ETDEWEB)

    Akbari, Mohammad Hadi; Rismanchi, Behzad [Department of Mechanical Engineering, Shiraz University, Shiraz 71348-51154 (Iran)

    2008-08-15

    A steady-state three-dimensional non-isothermal computational fluid dynamics (CFD) model of a proton exchange membrane fuel cell is presented. Conservation of mass, momentum, species, energy, and charge, as well as electrochemical kinetics are considered. In this model, the effect of interfacial contact resistance is also included. The numerical solution is based on a finite-volume method. In this study the effects of flow channel dimensions on the cell performance are investigated. Simulation results indicate that increasing the channel width will improve the limiting current density. However, it is observed that an optimum shoulder size of the flow channels exists for which the cell performance is the highest. Polarization curves are obtained for different operating conditions which, in general, compare favorably with the corresponding experimental data. Such a CFD model can be used as a tool in the development and optimization of PEM fuel cells. (author)

  3. Diffraction stress analysis of thin films; investigating elastic grain interaction

    International Nuclear Information System (INIS)

    Kumar, A.

    2005-12-01

    This work is dedicated to the investigation of specimens exhibiting anisotropic microstructures (and thus macroscopic elastic anisotropy) and/or inhomogeneous microstructures, as met near surfaces and in textured materials. The following aspects are covered: (i) Analysis of specimens with direction-dependent (anisotropic) elastic grain-interaction. Elastic grain-interaction determines the distribution of stresses and strains over the (crystallographically) differently oriented grains of a mechanically stressed polycrystal and the mechanical and diffraction (X-ray) elastic constants (relating (diffraction) lattice strains to mechanical stresses). Grain interaction models that allow for anisotropic, direction-dependent grain interaction have been developed very recently. The notion 'direction-dependent' grain-interaction signifies that different grain-interaction constraints prevail along different directions in a specimen. Practical examples of direction-dependent grain interaction are the occurrence of surface anisotropy in thin films and the surface regions of bulk polycrystals and the occurrence of grain-shape (morphological) texture. In this work, for the first time, stress analyses of thin films have been performed on the basis of these newly developed grain-interaction models. It has also been demonstrated that the identification of the (dominant) source of direction-dependent grain interaction is possible. The results for the grain interaction have been discussed in the light of microstructural investigations of the specimens by microscopic techniques. (ii) Analysis of specimens with depth gradients: Diffraction stress analysis can be hindered if gradients of the stress state, the composition or the microstructure occur in the specimen under investigation, as the so-called information depth varies in the course of a traditional stress measurement: Ambiguous results are thus generally obtained. In this work, a strategy for stress measurements at fixed

  4. Stress distribution and contact area measurements of a gecko toe using a high-resolution tactile sensor.

    Science.gov (United States)

    Eason, Eric V; Hawkes, Elliot W; Windheim, Marc; Christensen, David L; Libby, Thomas; Cutkosky, Mark R

    2015-02-02

    The adhesive systems of geckos have been widely studied and have been a great source of bioinspiration. Load-sharing (i.e. preventing stress concentrations through equal distribution of loads) is necessary to maximize the performance of an adhesive system, but it is not known to what extent load-sharing occurs in gecko toes. In this paper, we present in vivo measurements of the stress distribution and contact area on the toes of a tokay gecko (Gekko gecko) using a custom tactile sensor with 100 μm spatial resolution. We found that the stress distributions were nonuniform, with large variations in stress between and within lamellae, suggesting that load-sharing in the tokay gecko is uneven. These results may be relevant to the understanding of gecko morphology and the design of improved synthetic adhesive systems.

  5. Stress distribution and contact area measurements of a gecko toe using a high-resolution tactile sensor

    International Nuclear Information System (INIS)

    Eason, Eric V; Hawkes, Elliot W; Christensen, David L; Cutkosky, Mark R; Windheim, Marc; Libby, Thomas

    2015-01-01

    The adhesive systems of geckos have been widely studied and have been a great source of bioinspiration. Load-sharing (i.e. preventing stress concentrations through equal distribution of loads) is necessary to maximize the performance of an adhesive system, but it is not known to what extent load-sharing occurs in gecko toes. In this paper, we present in vivo measurements of the stress distribution and contact area on the toes of a tokay gecko (Gekko gecko) using a custom tactile sensor with 100 μm spatial resolution. We found that the stress distributions were nonuniform, with large variations in stress between and within lamellae, suggesting that load-sharing in the tokay gecko is uneven. These results may be relevant to the understanding of gecko morphology and the design of improved synthetic adhesive systems. (paper)

  6. Abnormal tibiofemoral contact stress and its association with altered kinematics after center-center anterior cruciate ligament reconstruction: an in vitro study.

    Science.gov (United States)

    Imhauser, Carl; Mauro, Craig; Choi, Daniel; Rosenberg, Eric; Mathew, Stephen; Nguyen, Joseph; Ma, Yan; Wickiewicz, Thomas

    2013-04-01

    Abnormal tibiofemoral contact stress and aberrant kinematics may influence the progression of osteoarthritis in the anterior cruciate ligament (ACL)-deficient and the ACL-reconstructed knee. However, relationships between contact stress and kinematics after ACL reconstruction are poorly understood. Therefore, we posed the following research questions: (1) How do ACL deficiency and reconstruction affect the kinematics of and contact stress in the tibiofemoral joint? (2) What kinematic differences are associated with abnormal contact stress after ACL reconstruction? Center-center ACL reconstruction will not restore knee kinematics and contact stress. Correlations will exist between abnormal contact stress and aberrant kinematics after ACL reconstruction. Controlled laboratory study. Clinical tests of anterior and rotational stability were simulated on 11 cadaveric knees using an industrial robot. Tests were conducted with the ACL intact, sectioned, and after single-bundle ACL reconstruction using a quadrupled hamstring autograft with tunnels drilled through the center of the native footprints. Kinematics were recorded during the tests. Contact stress was continuously recorded from a stress transducer fixed to the tibial plateau, and mean contact stress was calculated regionally. ACL deficiency resulted in increased mean contact stress in the posterior sectors of the medial and lateral compartments under anterior and rotational loads, respectively. Reconstruction reduced stress in these locations; however, contact stress abnormalities remained. On average, kinematics were overconstrained after ACL reconstruction (≤1.8 mm and ≤2.6° in all directions). However, combinations of overconstrained and underconstrained motions in abduction/adduction and medial-lateral translation in response to combined moments, and anterior-posterior translation, medial-lateral translation, and axial rotation in response to an anterior load were associated with abnormal mean contact

  7. HEAD INJURIES IN FULL CONTACT KARATE COMPETITION! IS THE PREJUDICE IN MANAGEMENT MINIMISING THE REQUIRED INVESTIGATION?

    Directory of Open Access Journals (Sweden)

    Michael R. Graham

    2007-10-01

    Full Text Available A 33 year old male karate practitioner presented himself for a full-contact national karate competition. This individual competed for approximately 2 minutes and received a kick to the head. He collapsed in the competitive arena, and suffered a tonic-clonic seizure, lasting for 3 minutes 25 seconds. Examination in the competitive arena revealed an individual who was unconscious. First aid, and paramedic support was provided immediately. Medical assessment identified the presence of vital signs. Glasgow coma scale (GCS, post trauma was recorded as 3/15 until the fifth minute. A patent airway was established and a neck brace was applied. Blood pressure within 1 minute of trauma was 195/98 mm.Hg, heart rate was 185 bpm and respiratory rate was 40 breaths·min-1. Oxygen was administered via a ventimask. The patient was conveyed to the medical area. The patient regained consciousness one minute after the seizure had resolved, but had amnesia concerning the event. GCS at five minutes was recorded as 13/15. The patient was transferred by ambulance to the nearest Hospital. The patient was discharged, following examination without further investigation. The finding of this study suggests that an individual with a history of head injury should have received computerised tomography as a minimum investigation. This may help eleviate the risk of further medical complications

  8. Stress and Sleep Reactivity: A Prospective Investigation of the Stress-Diathesis Model of Insomnia

    Science.gov (United States)

    Drake, Christopher L.; Pillai, Vivek; Roth, Thomas

    2014-01-01

    Study Objectives: To prospectively assess sleep reactivity as a diathesis of insomnia, and to delineate the interaction between this diathesis and naturalistic stress in the development of insomnia among normal sleepers. Design: Longitudinal. Setting: Community-based. Participants: 2,316 adults from the Evolution of Pathways to Insomnia Cohort (EPIC) with no history of insomnia or depression (46.8 ± 13.2 y; 60% female). Interventions: None. Measurements and Results: Participants reported the number of stressful events they encountered at baseline (Time 1), as well as the level of cognitive intrusion they experienced in response to each stressor. Stressful events (OR = 1.13; P insomnia one year hence (Time 2). Intrusion mediated the effects of stressful events on risk for insomnia (P insomnia (OR = 1.78; P insomnia as a function of intrusion was significantly higher in individuals with high sleep reactivity. Trait sleep reactivity also constituted a significant risk for depression (OR = 1.67; P Insomnia at Time 2 significantly mediated this effect (P insomnia, and that it triggers insomnia by exacerbating the effects of stress-induced intrusion. Sleep reactivity is also a precipitant of depression, as mediated by insomnia. These findings support the stress-diathesis model of insomnia, while highlighting sleep reactivity as an important diathesis. Citation: Drake CL, Pillai V, Roth T. Stress and sleep reactivity: a prospective investigation of the stress-diathesis model of insomnia. SLEEP 2014;37(8):1295-1304. PMID:25083009

  9. Determination of the contact stresses in double-row tapered roller bearings using the finite element method, experimental analysis and analytical models

    Energy Technology Data Exchange (ETDEWEB)

    Lostado, Ruben [University of La Rioja, Logroño (Spain); Martinez, Roberto Fernandez [University of Basque Country UPV/EHU, Bilbao (Spain); MacDonald, Bryan J. [Dublin City University, Dublin (Ireland)

    2015-11-15

    Double-row Tapered roller bearings (TRBs) are mechanical devices that are designed to support high axial, radial and torque loads. This combination of loads produces high contact stresses on the bearing raceways that are difficult to predict and validate experimentally, and can cause defects like pitting and fatigue spalling. In response, theoretical models have been proposed by many researchers to calculate the approximate distribution of contact stresses over the bearing raceways. More recently, numerical methods that are based on the Finite element method (FEM) have been used to obtain the contact stresses, although this method requires that the mesh size first be adjusted. This paper shows a process for adjusting a double-row TRB Finite element (FE) model. It is based on generating successive nonlinear FE submodels to calculate the distribution of contact stresses. A theoretical model and contact pressure sensors were used to adjust and validate the Finite element (FE) model.

  10. Investigation into stress wave propagation in metal foams

    Directory of Open Access Journals (Sweden)

    Li Lang

    2015-01-01

    Full Text Available The aim of this study is to investigate stress wave propagation in metal foams under high-speed impact loading. Three-dimensional Voronoi model is established to represent real closed-cell foam. Based on the one-dimensional stress wave theory and Voronoi model, a numerical model is developed to calculate the velocity of elastic wave and shock wave in metal foam. The effects of impact velocity and relative density of metal foam on the stress wave propagation in metal foams are explored respectively. The results show that both elastic wave and shock wave propagate faster in metal foams with larger relative density; with increasing the impact velocity, the shock wave propagation velocity increase, but the elastic wave propagation is not sensitive to the impact velocity.

  11. Investigating The Effect Of Job Stress On Performance Of Employees

    Directory of Open Access Journals (Sweden)

    Oyungerel Altangerel

    2015-02-01

    Full Text Available Abstract This study is conducted to investigate the effect of job stress on job performance. A random sampling technique is used to collect primary data of 120 employees of four telecommunication companies of Mongolia i.e. Mobicom Unitel Skytel and G-mobile. A well-structured questionnaire is utilized to collect relevant data descriptive and logistic analysis is used to estimate and describe the findings of results. It is found that work overload is major reason of stress among employees and majority of employees reduce their productivity and loss of interest in job due to stress. As for concern health issue eyes strain dizziness and disorder in sleep are due to job stress. According to results of logit model parameters of education experience and salary per month are statistically significant and have positive impact on employees performance but age family size no relaxation time giving to employees during working hours and work overload are statistically significant and have negative impact on employees job performance. For suggestions companies should increase salaries of employees and give reward to employees those have work overload. Workload of employees should reduce by proper work redesign and efficient management by proper allocation of job. It is also found that stress also becomes reason of several illnesses and majority of employees dont have medical facilities first aid at working place therefore it is suggested that companies should also provide medical facilities first aid for employees at work place.

  12. The investigation of contact line effect on nanosized droplet wetting behavior with solid temperature condition

    Science.gov (United States)

    Haegon, Lee; Joonsang, Lee

    2017-11-01

    In many multi-phase fluidic systems, there are essentially contact interfaces including liquid-vapor, liquid-solid, and solid-vapor phase. There is also a contact line where these three interfaces meet. The existence of these interfaces and contact lines has a considerable impact on the nanoscale droplet wetting behavior. However, recent studies have shown that Young's equation does not accurately represent this behavior at the nanoscale. It also emphasized the importance of the contact line effect.Therefore, We performed molecular dynamics simulation to imitate the behavior of nanoscale droplets with solid temperature condition. And we find the effect of solid temperature on the contact line motion. Furthermore, We figure out the effect of contact line force on the wetting behavior of droplet according to the different solid temperature condition. With solid temperature condition variation, the magnitude of contact line friction decreases significantly. We also divide contact line force by effect of bulk liquid, interfacial tension, and solid surface. This work was also supported by the National Research Foundation of Korea (NRF) Grant funded by the Korean Government (MSIP) (No. 2015R1A5A1037668) and BrainKorea21plus.

  13. Investigations of niobium carbide contact for carbon-nanotube-based devices

    International Nuclear Information System (INIS)

    Huang, L; Chor, E F; Wu, Y; Guo, Z

    2010-01-01

    Single-walled carbon nanotube (SWCNT) field effect transistors (FETs) with Nb contacts have been fabricated and upon annealing in vacuum at 700 deg. C for 1 h, niobium carbide (Nb 2 C) is formed at the Nb/SWCNT interface. The Nb 2 C/SWCNT contacts demonstrate a very small Schottky barrier height of ∼ 18 meV (decreased by > 80% relative to that of pristine Nb/SWCNT contact of ∼ 98 meV) to p-type transport. This is attributed to the higher work function of Nb 2 C (∼5.2 eV) than Nb (∼4.3 eV) and better bonding between Nb 2 C and SWCNTs. The performance of Nb 2 C-contacted SWCNT FETs is as follows: the p-channel ON current is as high as 0.5 μA at V DS = 0.1 V, the I ON /I OFF ratio is up to ∼ 10 5 and the subthreshold slope is ∼ 550 mV/dec, which is as good as that of titanium carbide (TiC-) and Pd-contacted SWCNT FETs. Compared with TiC, Nb 2 C contacts yield more unipolar p-type SWCNT FETs, as a result of the Nb 2 Cs higher work function. More importantly, Nb 2 C contacts can form near-ohmic contacts to both large-(≥1.6 nm) and small-diameter (∼1 nm) SWCNTs, while Pd can only form near-ohmic contacts for large-diameter SWCNTs. Moreover, the Nb 2 C contacts demonstrate good stability in air.

  14. A 3D finite element model to investigate prosthetic interface stresses of different posterior tibial slope.

    Science.gov (United States)

    Shen, Yi; Li, Xiaomiao; Fu, Xiaodong; Wang, Weili

    2015-11-01

    Posterior tibial slope that is created during proximal tibial resection in total knee arthroplasty has emerged as an important factor in the mechanics of the knee joint and the surgical outcome. But the ideal degree of posterior tibial slope for recovery of the knee joint function and preventions of complications remains controversial and should vary in different racial groups. The objective of this paper is to investigate the effects of posterior tibial slope on contact stresses in the tibial polyethylene component of total knee prostheses. Three-dimensional finite element analysis was used to calculate contact stresses in tibial polyethylene component of total knee prostheses subjected to a compressive load. The 3D finite element model of total knee prosthesis was constructed from the images produced by 3D scanning technology. Stresses in tibial polyethylene component were calculated with four different posterior tibial slopes (0°, 3°, 6° and 9°). The 3D finite element model of total knee prosthesis we presented was well validated. We found that the stress distribution in the polythene as evaluated by the distributions of the von Mises stress, the maximum principle stress, the minimum principle stress and the Cpress were more uniform with 3° and 6° posterior tibial slopes than with 0° and 9° posterior tibial slopes. Moreover, the peaks of the above stresses and trends of changes with increasing degree of knee flexion were more ideal with 3° and 6° posterior slopes. The results suggested that the tibial component inclination might be favourable to 7°-10° so far as the stress distribution is concerned. The range of the tibial component inclination also can decrease the wear of polyethylene. Chinese posterior tibial slope is bigger than in the West, and the current domestic use of prostheses is imported from the West, so their demands to tilt back bone cutting can lead to shorten the service life of prostheses; this experiment result is of important

  15. First contact: acute stress reactions and experiences of emergency department consultations following an incident of intimate partner violence.

    Science.gov (United States)

    Olive, Philippa

    2017-08-01

    The aim of this research was to explore women's emotional and affective responses following an incident of intimate partner violence experienced during emergency department attendances. A growing body of research has explored women's experiences of emergency departments following intimate partner violence still little remains known about the experience and impact of emotional and affective responses during these attendances. A descriptive qualitative design was used, underpinned theoretically by critical realism and postmodern complexity theory to attend to multiple, intersecting mechanisms that lie behind events and experiences. Semistructured interviews with six women who had attended an emergency department directly following an incident of intimate partner violence. Interview data were transcribed and thematically analysed in nvivo9 using a coding framework. There were three interconnected key findings. First, was the commonality of acute stress experiences among women attending an emergency department following partner violence, second was that these acute stress reactions negatively impacted women's consultations, and third was the need for specialist domestic violence services at the point of first contact to assist service users navigate an effective consultation. Acute stress reactions were an important feature of women's experiences of emergency department consultations following intimate partner violence. Attending to psychological first aid; providing a safe and quiet space; and affording access to specialist violence advocacy services at the point of first contact will limit harm and improve health consultation outcomes for this population. This research provides an account of emotional and affective responses experienced by women attending emergency departments following intimate partner violence and explicates how these acute stress reactions impacted their consultation. This research has relevance for practitioners in many first contact health

  16. Schottky and Ohmic Au contacts on GaAs: Microscopic and electrical investigation

    International Nuclear Information System (INIS)

    Liliental-Weber, Z.; Gronsky, R.; Washburn, J.; Newman, N.; Spicer, W.E.; Weber, E.R.

    1986-01-01

    We report here a systematic study which uses electrical device measurements and transmission electron microscopy (TEM) methods to investigate the electrical, morphological, and structural properties of Au/GaAs Schottky diodes. The electrical characteristics of Au diodes formed on atomically clean and air-exposed GaAs(110) surfaces are found to change from rectifying to Ohmic behavior after annealing above the Au--Ga eutectic temperature (360 0 C). This change is shown to be due to an Ohmic-like contact at the periphery of the device. TEM studies of these structures indicate that the Ohmic peripheral current pathway can be correlated with the formation of near surface Ga-rich Au crystallites at the diode circumference upon annealing. Further evidence of the correlation of the Ohmic electrical characteristics with the morphology of the periphery comes from data which indicate that the removal of these Au crystallites by mesa etching is also accompanied with the elimination of the Ohmic current. The morphology of the overlayer was found to depend strongly on annealing and surface treatment. TEM indicates that the interface is flat and abrupt for all unannealed diodes, as well as for annealed diodes formed on atomically clean surfaces. For annealed diodes formed on the air-exposed surfaces, the metal--semiconductor interface contains large metallic protrusions extending up to several hundred angstroms into the semiconductor. For comparison to practical structures, the morphology of annealed diodes formed using typical commercial processing technology [i.e., formed on chemically prepared (100) surfaces annealed in forming gas] was also investigated using TEM. The interface for these structures is more complex than interfaces formed on the atomically clean and air-exposed cleaved (110) surfaces

  17. The family drawings of at-risk children: concurrent relations with contact with incarcerated parents, caregiver behavior, and stress.

    Science.gov (United States)

    Dallaire, Danielle H; Ciccone, Anne; Wilson, Laura C

    2012-01-01

    The current study examined children's attachment representations as assessed with their family drawings in relation to contact with an incarcerated or estranged parent, caregiver behavior, and family stress in a high-risk sample of children (N = 44, M (age) = 8.14), 55% of whom had incarcerated parents. Greater phone, mail, and physical contact with an incarcerated parent was associated with more role reversal in children's family drawings. Additional results show that child-reports of more hostile caregiver behavior were associated with greater overall insecurity in their family drawings; child and caregiver reports of stress were associated with increased global pathology and bizarreness/dissociation in children's family drawings. Given the lack of research on concurrent familial-based correlates of ratings made of children's family drawings, these results provide additional insights into children's representations of attachment relationships in early middle childhood. Further, the results regarding contact with incarcerated parents have implications for researchers and clinicians working with families impacted by parental incarceration.

  18. Investigation of the Effect of Residual Stress Gradient on the Wear Behavior of PVD Thin Films

    Science.gov (United States)

    Tlili, B.; Nouveau, C.; Guillemot, G.; Besnard, A.; Barkaoui, A.

    2018-02-01

    The control of residual stresses has been seldom investigated in multilayer coatings dedicated to improvement of wear behavior. Here, we report the preparation and characterization of superposed structures composed of Cr, CrN and CrAlN layers. Nano-multilayers CrN/CrAlN and Cr/CrN/CrAlN were deposited by Physical Vapor Deposition (PVD) onto Si (100) and AISI4140 steel substrates. The Cr, CrN and CrAlN monolayers were developed with an innovative approach in PVD coatings technologies corresponding to deposition with different residual stresses levels. Composition and wear tracks morphologies of the coatings were characterized by scanning electron microscopy, high-resolution transmission electron microscopy, atomic force microscopy, x-ray photoelectron spectroscopy, energy-dispersive x-ray spectroscopy, x-ray diffraction and 3D-surface analyzer. The mechanical properties (hardness, residual stresses and wear) were investigated by nanoindentation, interferometry and micro-tribometry (fretting-wear tests). Observations suggest that multilayer coatings are composed mostly of nanocrystalline. The residual stresses level in the films has practically affected all the physicochemical and mechanical properties as well as the wear behavior. Consequently, it is demonstrated that the coating containing moderate stresses has a better wear behavior compared to the coating developed with higher residual stresses. The friction contact between coated samples and alumina balls shows also a large variety of wear mechanisms. In particular, the abrasive wear of the coatings was a combination of plastic deformation, fine microcracking and microspallation. The application of these multilayers will be wood machining of green wood.

  19. Investigation of effect of post weld heat treatment conditions on residual stress for ITER blanket shield blocks

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Hun-Chea, E-mail: hcjung@nfri.re.kr [ITER Korea, National Fusion Research Institute, Daejeon (Korea, Republic of); Kim, Sa-Woong [ITER Korea, National Fusion Research Institute, Daejeon (Korea, Republic of); Lee, Yun-Hee [Division of Convergence Technology, Korea Research Institute of Standard and Science (KRISS), Daejeon (Korea, Republic of); Baek, Seung-Wook [Division of Industrial Metrology, Korea Research Institute of Standard and Science (KRISS), Daejeon (Korea, Republic of); Ha, Min-Su; Shim, Hee-Jin [ITER Korea, National Fusion Research Institute, Daejeon (Korea, Republic of)

    2016-11-01

    Highlights: • PWHT for ITER blanket shield block should be performed for dimensional stability. • Investigation of the effect of PWHT conditions on properties was performed. • Instrumented indentation method for evaluation of properties was used. • Residual stress and hardness decreased with increasing PWHT temperature. • Optimization of PWHT conditions would be needed for satisfaction of requirement. - Abstract: The blanket shield block (SB) shall be required the tight tolerance because SB interfaces with many components, such as flexible support keypads, First Wall (FW) support contact surfaces, FW central bolt, electrical strap contact surfaces and attachment inserts for both FW and Vacuum Vessel (VV). In order to fulfil the tight tolerance requirement, stress relieving shall be performed for dimensional stability after cover welding operation. In this paper, effect of Post Weld Heat Treatment (PWHT) conditions, temperature and holding time, was investigated on the residual stress and hardness. The 316L Stainless Steel (SS) was prepared and welded by manual TIG welding by using filler material with 2.4 mm of diameter. Welded 316L SS plate was machined to prepare the specimen for PWHT. PWHT was implemented at 250, 300, 400 °C for 2 and 3 h (400 °C only) and residual stress after relaxation were determined. The evaluation of residual stress and hardness for each specimen was carried out by instrumented indentation technique. The residual stress and hardness were decreased with increasing the heat treatment temperature and holding time.

  20. Contact problem on indentation of an elastic half-plane with an inhomogeneous coating by a flat punch in the presence of tangential stresses on a surface

    Science.gov (United States)

    Volkov, Sergei S.; Vasiliev, Andrey S.; Aizikovich, Sergei M.; Sadyrin, Evgeniy V.

    2018-05-01

    Indentation of an elastic half-space with functionally graded coating by a rigid flat punch is studied. The half-plane is additionally subjected to distributed tangential stresses. Tangential stresses are represented in a form of Fourier series. The problem is reduced to the solution of two dual integral equations over even and odd functions describing distribution of unknown normal contact stresses. The solutions of these dual integral equations are constructed by the bilateral asymptotic method. Approximated analytical expressions for contact normal stresses are provided.

  1. Interfacial fatigue stress in PVD TiN coated tool steels under rolling contact fatigue conditions

    NARCIS (Netherlands)

    Carvalho, N.J.M.; Huis in 't Veld, A.J.; Hosson, J.T. de

    1998-01-01

    Titanium-nitrogen (TiN) films were Physical Vapour Deposited (PVD) on tool steel substrates with different hardness and surface roughness, in a Bai 640R unit using a triode ion plating (e-gun) with a high plasma density. The coated substrates were submitted to a rolling contact fatigue test

  2. Interfacial fatigue stress in PVD TiN coated tool steels under rolling contact fatigue conditions

    NARCIS (Netherlands)

    Carvalho, N.J.M.; Huis in ’t Veld, A.J.; Hosson, J.Th. De

    1998-01-01

    Titanium–nitrogen (TiN) films were Physical Vapour Deposited (PVD) on tool steel substrates with different hardness and surface roughness, in a Bai 640R unit using a triode ion plating (e-gun) with a high plasma density. The coated substrates were submitted to a rolling contact fatigue test

  3. Wetting of biopolymer coatings: contact angle kinetics and image analysis investigation.

    Science.gov (United States)

    Farris, Stefano; Introzzi, Laura; Biagioni, Paolo; Holz, Torsten; Schiraldi, Alberto; Piergiovanni, Luciano

    2011-06-21

    The surface wetting of five biopolymers, used as coating materials for a plastic film, was monitored over a span of 8 min by means of the optical contact angle technique. Because most of the total variation was observed to occur during the first 60 s, we decided to focus on this curtailed temporal window. Initial contact angle values (θ(0)) ranged from ∼91° for chitosan to ∼30° for pullulan. However, the water drop profile began to change immediately following drop deposition for all biocoatings, confirming that the concept of water contact angle equilibrium is not applicable to most biopolymers. First, a three-parameter decay equation [θ(t) = θ(0) exp(kt(n))] was fit to the experimental contact angle data to describe the kinetics of the contact angle change for each biocoating. Interestingly, the k constant correlated well with the contact angle evolution rate and the n exponent seemed to be somehow linked to the physicochemical phenomena underlying the overall kinetics process. Second, to achieve a reliable description of droplet evolution, the contact angle (CA) analysis was coupled with image analysis (IA) through a combined geometric/trigonometric approach. Absorption and spreading were the key factors governing the overall mechanism of surface wetting during the 60 s analysis, although the individual quantification of both phenomena demonstrated that spreading provided the largest contribution for all biopolymers, with the only exception of gelatin, which showed two quasi-equivalent and counterbalancing effects. The possible correlation between these two phenomena and the topography of the biopolymer surfaces are then discussed on the basis of atomic force microscopy analyses. © 2011 American Chemical Society

  4. Post-Cam Design and Contact Stress on Tibial Posts in Posterior-Stabilized Total Knee Prostheses: Comparison Between a Rounded and a Squared Design.

    Science.gov (United States)

    Watanabe, Toshifumi; Koga, Hideyuki; Horie, Masafumi; Katagiri, Hiroki; Sekiya, Ichiro; Muneta, Takeshi

    2017-12-01

    The post-cam mechanism in posterior stabilized (PS) prostheses plays an important role in total knee arthroplasty (TKA). The purpose of this study is to clarify the difference of the contact stress on the tibial post between a rounded post-cam design and a squared design during deep knee flexion and at hyperextension using the three-dimensional (3D) finite element models. We created 2 types of 3D, finite element models of PS prostheses (types A and B), whose surfaces were identical except for the post-cam geometries: type A has a rounded post-cam design, while type B has a squared design. Both types have a similar curved-shape intercondylar notch of the femoral component. Stress distributions, peak contact stresses, and contact areas on the tibial posts at 90°, 120°, and 150° flexion with/without 10° tibial internal rotation and at 10° hyperextension were compared between the 2 models. Type B demonstrated more concentrated stress distribution compared to type A. The peak contact stresses were similar in both groups during neutral flexion; however, the stresses were much higher in type B during flexion with 10° rotation and at hyperextension. The higher peak contact stresses corresponded to the smaller contact areas in the tibial post. A rounded post-cam design demonstrated less stress concentration during flexion with rotation and at hyperextension compared with a squared design. The results would be useful for development of implant designs and prediction of the contact stress on the tibial post in PS total knee arthroplasty. Copyright © 2017 Elsevier Inc. All rights reserved.

  5. Investigation of Thermostressed State of Coating Formation at Electric Contact Surfacing of “Shaft” Type Parts

    Directory of Open Access Journals (Sweden)

    Olena V. Berezshnaya

    2016-01-01

    Full Text Available The forming of coating at electric contact surfacing is considered. The mathematical model of the coating formation is developed. The method of numerical recurrent solution of the finite-difference form of static equilibrium conditions of the selected elementary volume of coating is used. This model considers distribution of thermal properties and geometric parameters along the thermal deformation zone during the process of electric contact surfacing by compact material. It is found that the change of value of speed asymmetry factor leads to increasing of the friction coefficient in zone of surfacing. This provides the forming of the coating of higher quality. The limitation of the technological capabilities of equipment for electric contact surfacing is related to the size of recoverable parts and application of high electromechanical powers. The regulation of the speed asymmetry factor allows for expanding the technological capabilities of equipment for electric contact surfacing. The nomograms for determination of the stress on the roller electrode and the finite thickness of the coating as the function of the initial thickness of the compact material and the deformation degree are shown.

  6. Children with pertussis inform the investigation of other pertussis cases among contacts

    Directory of Open Access Journals (Sweden)

    Rodrigues Laura C

    2007-05-01

    Full Text Available Abstract Background The number of reported pertussis has increased in the last two decades. However, many cases of pertussis may be underreported or not diagnosed. The World Health Organization estimates that pertussis causes 200.000 – 400.000 deaths each year, most deaths are in infants and in developing countries. Infants with pertussis can indicate an undetected source cases in the community. Methods At a University Hospital in Brazil individuals that had frequent contacts with a child with confirmed pertussis (the index case and had recent history of cough were enrolled into the study. Nasopharyngeal swabs were collected from every contact that had cough within the last 21 days. Cases confirmation followed the guidelines of the Center for Disease Control and Prevention – Atlanta, U.S.A. Results Pertussis diagnosis was confirmed in 51 children, (considered the index cases. Among the index cases, 72.5% (37/51 were under 6 months of age; culture for Bordetella pertussis was positive in 78.4% (40/51. Pertussis was confirmed in 39% (107/276 of the contacts of 51 index cases. Among these contacts identified as a pertussis case, 40.2% (43/107 were between 6 months and 111/2 years of age and 59.8% (64/107 were older than 111/2 years of age. Pertussis was confirmed by culture in 11.2% (12/107 of them and by epidemiologic linkage in 88.8% (95/107. Each index case allowed identifying two new cases of pertussis. Conclusion Public health authorities should consider implementing early recognition of pertussis index cases and searching for pertussis cases among the contacts. Treatment of the cases and prophylaxis of the contacts is fundamental to control outbreaks in the community.

  7. New paleoparasitological investigations from the pre-inca to hispanic contact period in northern Chile.

    Science.gov (United States)

    de Souza, Mônica Vieira; da Silva, Lucélia Guedes Ribeiro; Silva-Pinto, Verónica; Mendez-Quiros, Pablo; de Miranda Chaves, Sergio Augusto; Iñiguez, Alena Mayo

    2018-02-01

    Paleoparasitological studies have demonstrated that changes in environment or culture are reflected in the patterns of parasitic infection diseases in populations worldwide. The advent of agriculture and animal domestication, with its accompanying reduction in human mobility and expanding population involves changes in or emergence of, parasites, the so-called first epidemiological transition. Cultural processes related to territory occupation contribute to both loss and acquisition of parasites. The archaeological site Lluta 57 in the Lluta Valley, Chile, provides a chronology of the transition from the pre-Inca or Late Intermediate Period (LIP), through the Late or Inca Period (LP), to the Hispanic Contact Period (HCP), providing the possibility of evaluating this epidemiological transition. The aim of this study was to conduct a paleoparasitological investigation of to gain insight into the dynamics of parasitism in Lluta people throughout the Inca expansion. Fourteen human coprolites from the three periods were rehydrated, submitted to spontaneous sedimentation, and examined by light microscopy for the presence of intestinal parasite eggs, pollen grains, and micro-remains. Eggs of four parasites: Enterobius vermicularis, Trichostrongylus sp., Trichuris sp., and Eimeria macusaniensis were recovered. Frequency, diversity, and number of parasite eggs per sample increased over the studied time period. Trichostrongylus sp. and E. macusaniensis were recorded in the region for the first time. Enterobius vermicularis eggs, absent in the LIP, were present as a hyper-infection in LP. The presence of E. macusaniensis is likely related to exploitation of llamas, which were used for food and transport and as sacrificial offerings. The paleobotanical analysis revealed ten families of pollen grains, as well as phytoliths and floral remains. In contrast to parasitological results, a diachronic pattern was not detected. Evolution of the settlements, with the advent of larger

  8. Investigation heat stress in small enterprise in Qom city

    Directory of Open Access Journals (Sweden)

    R. hajizadeh

    2014-02-01

    .Conclusion: Heat stress in almost all of the studied workplaces are higher than the recommended limits, and the outdoor workshops had the highest thermal stress, although heat stress did not show a significant correlation with the studied strains.

  9. On the external relations of Purepecha : an investigation into classification, contact and patterns of word formation

    NARCIS (Netherlands)

    Bellamy, K.R.

    2018-01-01

    This thesis considers Purepecha from the perspectives of genealogy and contact, as well as offering insight into word formation processes. The genealogy study re-visits the most prominent classification proposals for Purepecha, concluding on the basis of a quantitative lexical comparison and

  10. Investigating the lubricity and electrical insulation caused by sanding in dry wheel–rail contacts

    NARCIS (Netherlands)

    Arias-Cuevas, O.; Li, Z.; Lewis, R.

    2009-01-01

    The adhesion (or available friction) in the wheel–rail contact is the most important parameter for the braking and traction operation of rail vehicles. Since the beginning of railway transportation, sanding from the locomotive has been a common practice to enhance the wheel–rail adhesion. In recent

  11. Investigations of Caenorhabditis Elegans Using Soft X-ray Contact Microscopy

    Czech Academy of Sciences Publication Activity Database

    Desai, T.; Batani, D.; Bernardinello, A.; Poletti, G.; Orsini, F.; Ullschmied, Jiří; Skála, Jiří; Králiková, Božena; Krouský, Eduard; Mocek, Karel; Pfeifer, Miroslav; Kadlec, Christelle; Mocek, Tomáš; Präg R., Ansgar; Renner, Oldřich; Juha, Libor; Cotelli, F.; Lamia, C. L.; Zullini, A.

    2004-01-01

    Roč. 20, č. 3 (2004), s. 121-125 ISSN 1120-1797 R&D Projects: GA MŠk LN00A100 Keywords : C. elegans * soft X-ray contact microscopy * intense laser plasma * gold target Subject RIV: BH - Optics, Masers, Lasers Impact factor: 0.341, year: 2004

  12. Experimental Investigation of Coal Dust Wettability Based on Surface Contact Angle

    Directory of Open Access Journals (Sweden)

    Gang Zhou

    2016-01-01

    Full Text Available Wettability is one of the key chemical properties of coal dust, which is very important to dedusting. In this paper, the theory of liquid wetting solid was presented firstly; then, taking the gas coal of Xinglongzhuang coal mine in China as an example, by determination of critical surface tension of coal piece, it can be concluded that only when the surface tension of surfactant solution is less than 45 mN/m can the coal sample be fully wetted. Due to the effect of particle dispersity, compared with the contact angle of milled coal particle, not all the contact angles of screened coal powder with different sizes have a tendency to increase. Furthermore, by the experiments of coal samples’ specific surface areas and porosities, it can be achieved that the volume of single-point total pore decreases with the gradual decreasing of coal’s porosity, while the ultramicropores’ dispersities and multipoint BET specific surface areas increase. Besides, by a series of contact angle experiments with different surfactants, it can be found that with the increasing of porosity and the decreasing of volume percentage of ultramicropore, the contact angle tends to reduce gradually and the coal dust is much easier to get wetted.

  13. Role of multiaxial stress state in the hydrogen-assisted rolling-contact fatigue in bearings for wind turbines

    Directory of Open Access Journals (Sweden)

    J. Toribio

    2015-07-01

    Full Text Available Offshore wind turbines often involve important engineering challenges such as the improvement of hydrogen embrittlement resistance of the turbine bearings. These elements frequently suffer the so-called phenomenon of hydrogen-assisted rolling-contact fatigue (HA-RCF as a consequence of the synergic action of the surrounding harsh environment (the lubricant supplying hydrogen to the material and the cyclic multiaxial stress state caused by in-service mechanical loading. Thus the complex phenomenon could be classified as hydrogen-assisted rolling-contact multiaxial fatigue (HA-RC-MF. This paper analyses, from the mechanical and the chemical points of view, the so-called ball-on-rod test, widely used to evaluate the hydrogen embrittlement susceptibility of turbine bearings. Both the stress-strain states and the steady-state hydrogen concentration distribution are studied, so that a better elucidation can be obtained of the potential fracture places where the hydrogen could be more harmful and, consequently, where the turbine bearings could fail during their life in service.

  14. Transducer for measuring normal and friction stress in contact zone during rolling

    DEFF Research Database (Denmark)

    Henningsen, Poul; Wanheim, Tarras; Arentoft, Mogens

    2004-01-01

    , generating frictional stresses contrary to the direction of rolling. In a narrow area in the deformation zone, the velocity of the deformed material is equal to the velocity of the rolls. This area or line is named “neutral line”[2]. The position of the neutral line depends on friction, reduction ratio...

  15. Toward using tire-road contact stresses in pavement design and analysis

    CSIR Research Space (South Africa)

    De Beer, Morris

    2012-10-01

    Full Text Available pavement design. Four different tire models were used to represent a single tire type in order to demonstrate its effect on road pavement response of a typical South African pavement structure. Only applied vertical stress was used for the analyses...

  16. Experimental and numerical investigations on the direct contact condensation phenomenon in horizontal flow channels and its implications in nuclear safety

    Energy Technology Data Exchange (ETDEWEB)

    Ceuca, Sabin Cristian [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH, Garching (Germany); Laurinavicius, Darius [Lithuanian Energy Institute, Kaunas (Lithuania)

    2016-11-15

    The complex direct contact condensation phenomenon is investigated in horizontal flow channels both experimentally and numerically with special emphasis on its implications on safety assessment studies. Under certain conditions direct contact condensation can act as the driving force for the water hammer phenomenon with potentially local devastating results, thus posing a threat to the integrity of the affected NPP components. New experimental results of in-depth analysis of the direct contact condensation phenomena obtained in Kaunas at the Lithuanian Energy Institute will be presented. The German system code ATHLET employing for the calculation of the heat transfer coefficient a mechanistic model accounting for two different eddy length scales, combined with the interfacial area transport equation will be assessed against condensation induced water hammer experimental data from the integral thermal-hydraulic experimental facility PMK-2, located at the KFKI Atomic Energy Research Institute in Budapest Hungary.

  17. Interfacial fatigue stress in PVD TiN coated tool steels under rolling contact fatigue conditions

    OpenAIRE

    Carvalho, N.J.M.; Huis in ’t Veld, A.J.; Hosson, J.Th. De

    1998-01-01

    Titanium–nitrogen (TiN) films were Physical Vapour Deposited (PVD) on tool steel substrates with different hardness and surface roughness, in a Bai 640R unit using a triode ion plating (e-gun) with a high plasma density. The coated substrates were submitted to a rolling contact fatigue test technique (modified pin-on-ring test) to obtain some clarifications of the mechanism of interfacial failure. Tests were run using PVD-coated rings finished by polishing or grinding to produce different sur...

  18. Effect of an edge at cup rim on contact stress during micro-separation in ceramic-on-ceramic hip joints.

    Science.gov (United States)

    Liu, Feng; Fisher, John

    2017-09-01

    Alumina ceramic total hip joint bearings have shown superior wear properties. The joint bearing may undergo adverse conditions such as micro-separation causing head contact on the cup rim. As a transition, an edge is formed between the cup bearing and the rim. The aim of this study was to predict the effect of the edge on contact stresses in order to better understand the mechanisms of wear. A finite element contact model was developed under the conditions of the head displacements 0.5-2 mm and vertical loads 0.5-3 kN. The edge contact produced the most severe stresses capable of causing elevated wear and damage to ceramic bearings. The study shows that the bearing design should be considered in association with clinical conditions to eliminate severe stress.

  19. Investigation of force, contact area, and dwell time in finger-tapping tasks on membrane touch interface.

    Science.gov (United States)

    Liu, Na; Yu, Ruifeng

    2018-06-01

    This study aimed to determine the touch characteristics during tapping tasks on membrane touch interface and investigate the effects of posture and gender on touch characteristics variables. One hundred participants tapped digits displayed on a membrane touch interface on sitting and standing positions using all fingers of the dominant hand. Touch characteristics measures included average force, contact area, and dwell time. Across fingers and postures, males exerted larger force and contact area than females, but similar dwell time. Across genders and postures, thumb exerted the largest force and the force of the other four fingers showed no significant difference. The contact area of the thumb was the largest, whereas that of the little finger was the smallest; the dwell time of the thumb was the longest, whereas that of the middle finger was the shortest. Relationships among finger sizes, gender, posture and touch characteristics were proposed. The findings helped direct membrane touch interface design for digital and numerical control products from hardware and software perspectives. Practitioner Summary: This study measured force, contact area, and dwell time in tapping tasks on membrane touch interface and examined effects of gender and posture on force, contact area, and dwell time. The findings will direct membrane touch interface design for digital and numerical control products from hardware and software perspectives.

  20. CFD investigation of thermal-hydraulic characteristics in a PBR core using different contact treatments between pebbles

    International Nuclear Information System (INIS)

    Ferng, Y.M.; Lin, K.Y.

    2014-01-01

    Highlights: • It is important to study thermal-hydraulic characteristics in a PBR for a HTGR. • A CFD model is proposed to simulate flow and heat transfer in a segment of pebbles. • Area and point contact treatments for adjacent pebbles are adopted in this study. • Predicted dependences of Nu and friction factor agree with the correlations. - Abstract: A high temperature gas cooled reactor (HTGR) with a pebble bed core (PBR) can be considered as one of the possible energy generation sources in the incoming future due to its inherently safe performance, lower power density, and higher conversion efficiency, etc. It is important to study the thermal-hydraulic characteristics in a PBR for optimum design and safe operation of a HTGR. In this paper, a computational fluid dynamics (CFD) methodology is proposed to investigate the thermal-hydraulic behavior in a segment of pebbles representing the central region of a PBR. Two kinds of contact modeling between adjacent pebbles are adopted, namely area and point contact treatments. The former contact treatment is a geometric approximation modeling. Based on the comparisons of thermal-hydraulic characteristics in the pebbles predicted by both contact treatments, no significant difference is revealed except for the near-wall secondary flow pattern. In addition, compared with the calculated results from the well-known correlations, the present predicted dependence of Nu number and friction factor on the particle Reynolds number shows good agreement qualitatively and quantitatively

  1. An Investigation of a New Social Networks Contact Suggestion Based on Face Recognition Algorithm

    Directory of Open Access Journals (Sweden)

    Ivan Zelinka

    2016-01-01

    Full Text Available Automated comparison of faces in the photographs is a well established discipline. The main aim of this paper is to describe an approach whereby face recognition can be used in suggestion of a new contacts. The new contact suggestion is a common technique used across all main social networks. Our approach uses a freely available face comparison called "Betaface" together with our automated processig of the user´s Facebook profile. The research´s main point of interest is the comparison of friend´s facial images in a social network itself, how to process such a great amount of photos and what additional sources of data should be used. In this approach we used our automated processing algorithm Betaface in the social network Facebook and for the additional data, the Flickr social network was used. The results and their quality are discussed at the end.

  2. HEAD INJURIES IN FULL CONTACT KARATE COMPETITION! IS THE PREJUDICE IN MANAGEMENT MINIMISING THE REQUIRED INVESTIGATION?

    OpenAIRE

    Michael R. Graham; Bruce Davies; Julien S. Baker

    2007-01-01

    A 33 year old male karate practitioner presented himself for a full-contact national karate competition. This individual competed for approximately 2 minutes and received a kick to the head. He collapsed in the competitive arena, and suffered a tonic-clonic seizure, lasting for 3 minutes 25 seconds. Examination in the competitive arena revealed an individual who was unconscious. First aid, and paramedic support was provided immediately. Medical assessment identified the presence of vital sign...

  3. Investigating Alkylsilane Monolayer Tribology at a Single-Asperity Contact with Molecular Dynamics Simulation.

    Science.gov (United States)

    Summers, Andrew Z; Iacovella, Christopher R; Cummings, Peter T; McCabe, Clare

    2017-10-24

    Chemisorbed monolayer films are known to possess favorable characteristics for nanoscale lubrication of micro- and nanoelectromechanical systems (MEMS/NEMS). Prior studies have shown that the friction observed for monolayer-coated surfaces features a strong dependence on the geometry of contact. Specifically, tip-like geometries have been shown to penetrate into monolayer films, inducing defects in the monolayer chains and leading to plowing mechanisms during shear, which result in higher coefficients of friction (COF) than those observed for planar geometries. In this work, we use molecular dynamics simulations to examine the tribology of model silica single-asperity contacts under shear with monolayer-coated substrates featuring various film densities. It is observed that lower monolayer densities lead to reduced COFs, in contrast to results for planar systems where COF is found to be nearly independent of monolayer density. This is attributed to a liquid-like response to shear, whereby fewer defects are imparted in monolayer chains from the asperity, and chains are easily displaced by the tip as a result of the higher free volume. This transition in the mechanism of molecular plowing suggests that liquid-like films should provide favorable lubrication at single-asperity contacts.

  4. Hybrid numerical-experimental optical investigation of the contact zone of ultrasonic motors

    Science.gov (United States)

    Ostasevicius, Vytautas; Palevicius, Arvydas; Ragulskis, Minvydas; Janusas, Giedrius; Pilkauskas, Kestutis

    2005-09-01

    Ultrasonic motors have seen application in areas needing compact, efficient, and intermittent motion. Such applications include: camera auto focus lenses, watch motors, compact paper handling, microrobots, medicine and etc.. They are characterized by high torque at low rotational speed, simple mechanical design and good controllability. Compared with electromagnetic actuators, there is no danger of interference due to electromagnetic induction because no magnetic field is used and ultrasonic motors are more quiet since speed-reduction gears are not required. A polarization vector of the piezoceramic element and location of excitation electrodes on its surface determine the resonance modes of the high frequency vibration exciter. In its turn the modes of vibration play a key role in the functionality of ultrasonic motor. There are analyzed two different regimes of operation--when the contact zone of the resonator performs elliptic and unidirectional motions. Though the mechanical characteristics of the ultrasonic motor in both cases are comparable, detailed analysis of the contact surface shows very different wears. Laser holography is used to identify and control the regimes of motion of actuator. Experimental results are compared with computer simulations. Contact surfaces are analyzed by atomic force microscope (AFM) before experiment, after 10 minutes and after 50 minutes of operation.

  5. INVESTIGATION OF MECHANICAL STRESSES IN THE DRIVE SHAFT OF MV VACUUM CIRCUIT BREAKER

    Directory of Open Access Journals (Sweden)

    E. I. Baida

    2017-03-01

    Full Text Available Introduction. In the last 10-15 years a dominant position in the market of medium voltage circuit breakers, vacuum circuit breakers have taken in which as an actuator mono- or bistable actuators with permanent magnets are used. Such circuit breakers are characterized by simplicity of design, high reliability, require preventive maintenance for many years. Development, research and improvement of vacuum circuit breakers are carried out at the Department for Electrical Apparatus, National Technical University «Kharkiv Polytechnic Institute». While working on the circuit breakers, developers have to deal with two related objectives – electrical and mechanical. This paper considers the solution of one of these problems – calculation of mechanical forces in the drive shaft of the vacuum circuit breaker in static and dynamic modes. This work was preceded by the failure of the results of measurements of the prototype circuit breakers’ contacts. Measurements have shown that these values do not match the expected values (there were less than the value of 0.8 to 1 mm. The assumption about the reasons for this discrepancy needed to be detailed checked. The results of the work done are presented in this paper. Purpose. Investigation of static and dynamic mechanical stresses and strains in the drive shaft of the vacuum circuit breaker mechanism to determine its characteristics and material selection. Methods. The investigation of mechanical processes is performed by the finite element method in the COMSOL software package. Results. We obtain the static and dynamic characteristics of the circuit breaker drive shaft: deformations, reaction forces, stresses. These characteristics made it possible to determine the actual course of the contacts, select shaft material and calculate the forces acting on the bearings. Conclusions. It is shown that the contact velocity and contact pressure are different from the theoretical value due to the deformation of the

  6. Investigation of snow cover dust pollution by contact and satellite observations

    Science.gov (United States)

    Raputa, Vladimir F.; Yaroslavtseva, Tatyana V.

    2015-11-01

    The problems of reconstructing the snow cover pollution fields from dusting, point, linear and area sources according to ground and satellite observations are considered. Using reconstruction models, the methods of the combined analysis of the characteristic images of snow cover pollution haloes in the vicinity of sources of dust and contact data observations have been developed. On the basis of the numerical data analysis of ground monitoring and satellite imagery, the stable quantitative regularities between the fields of dust fallouts and the intensity of a change of tones of gray in the radial directions relative to the main sources are identified.

  7. Investigating the effects of different physical and chemical stress ...

    African Journals Online (AJOL)

    2018-04-09

    Apr 9, 2018 ... bacteria from extreme physical and chemical stress conditions. Additionally .... by inducing stress response genes, become more tolerant phenotypes ..... biofilm, monochloramine is more effective than free chlorine over long ...

  8. Photoelastic investigation of the stresses in mitred bent-cylinders under bending, 2

    International Nuclear Information System (INIS)

    Sawa, Yoshiaki

    1984-01-01

    The states of stress distribution in mitred bend subjected to inplane uniform bending moment have been studied systematically by means of photoelastic stress freezing method. The relations between the stress concentration factor of fiber stress σsub(l) and of hoop stress σsub(theta) near the bent part and the angle of mitred bend are thoroughly investigated. The effects of fillet radius of the bent-part and wall thickness on the stress concentration factors are also discussed. (author)

  9. Investigation of a ceramic vane with a metal disk thermal and mechanical contact in a gas turbine impeller

    Directory of Open Access Journals (Sweden)

    Resnick S.V.

    2015-01-01

    Full Text Available Promising directions of a new generation gas turbine engines development include using in gas turbines ceramic materials blades with high strength, thermal and chemical stability. One of the serious problems in developing such motors is insufficient knowledge of contact phenomena occurring in ceramic and metal details connection nodes. This work presents the numerical modeling results of thermal processes on ceramic and metal details rough boundaries. The investigation results are used in conducting experimental researches in conditions reproducing operating.

  10. Experimental investigation of the contact resistance of Graphene/MoS2 interface treated with O2 plasma

    Science.gov (United States)

    Lu, Qin; Liu, Yan; Han, Genquan; Fang, Cizhe; Shao, Yao; Zhang, Jincheng; Hao, Yue

    2018-02-01

    High contact resistance has been a major bottleneck for MoS2 to achieve high performances among two-dimensional material based optoelectronic and electronic devices. In this study, we investigate the contact resistances of different layered graphene film with MoS2 film with Ti/Au electrodes under different O2 plasma treatment time using the circular transmission line model (CTLM). Annealing process followed O2 plasma process to reduce the oxygen element introduced. Raman and X-ray photoelectric spectroscopy were used to analyze the quality of the materials. Finally, the current and voltage curve indicates good linear characteristics. Under the optimized condition of the O2 plasma treatment, a relatively low contact resistance (∼35.7 Ohm mm) without back gate voltage in single-layer graphene/MoS2 structure at room temperature was achieved compared with the existing reports. This method of introducing graphene as electrodes for MoS2 film demonstrates a remarkable ability to improve the contact resistance, without additional channel doping for two-dimensional materials based devices, which paves the way for MoS2 to be a more promising channel material in optoelectronic and electronic integration.

  11. EXPERIMENTAL INVESTIGATION OF THE ADHESIVE CONTACT WITH ELASTOMERS: EFFECT OF SURFACE ROUGHNESS

    Directory of Open Access Journals (Sweden)

    Lars Voll

    2015-04-01

    Full Text Available Adhesion between an elastomer and a steel indenter was studied experimentally and described with an analytical model. Cylindrical indenters having different roughness were brought into contact with an elastomer with various normal forces. After a “holding time”, the indenter was pulled with a constant velocity, which was the same in all experiments. We have studied the regime of relatively small initial normal loadings, large holding times and relatively large pulling velocities, so that the adhesive force did not depend on the holding time but did depend on the initially applied normal force and was approximately proportional to the pulling velocity. Under these conditions, we found that the adhesive force is inversely proportional to the roughness and proportional to the normal force. For the theoretical analysis, we used a previously published MDR-based model.

  12. Investigation of the Sintering Process Using Non-Contact Electromagnetic Acoustic Transducers

    International Nuclear Information System (INIS)

    James C. Foley; David K. Rehbein; Daniel J. Barnard

    2001-01-01

    In-situ characterizations of green state part density and sintering state have long been desired in the powder metal community. Recent advances in non-contact electromagnetic acoustic transducer (EMAT) technology have enabled in-situ monitoring of acoustic amplitude and velocity as sintering proceeds. Samples were made from elemental powders of Al (99.99%), Al (99.7%), Ag, (99.99%), Cu (99.99%) and Fe (99.9%). The powders were pressed in a uniaxial die and examined with acoustic waves for changes in velocity and amplitude during sintering for the samples containing Al, Ag, and Cu. The changes in acoustic properties were correlated with sample microstructures and mechanical properties. Evolution of a series of reverberating echoes during sintering is shown to provide information on the state of sintering, and changes in sintering kinetics as well as having the potential for detection of interior flaws

  13. Transport and contact-free investigation of REBCO thin film temperature dependent pinning landscapes

    Science.gov (United States)

    Sinclair, John; Jaroszynski, Jan; Hu, Xinbo; Santos, Michael

    2013-03-01

    Studies of the pinning mechanisms and landscapes of REBa2Cu3Ox (RE=rare earth elements) thin films have been a topic of study in recent years due to, among other reasons, their ability to introduce nonsuperconducting phases and defects. Here we will focus on REBCO thin films with BaZrO3 nanocolumns and other isotropic defects. The evolution of the dominant pinning mechanisms seems to change as a function of temperature even to the point that samples with similar critical current density properties at high temperatures can have distinctly different properties at low temperatures. Earlier work focused on the angular selectivity of the current density profile, though other properties (such as alpha values) can evolve as well. Characteristic results accentuating this evolution of current density properties will be presented. Challenges exist in evaluating these low temperature properties in high magnetic fields, therefore both transport and contact-free results were be presented to compliment the work. Support for this work is provided by the NHMFL via NSF DRM 0654118.

  14. Transmissibility of Tuberculosis among School Contacts: An Outbreak Investigation in a Boarding Middle School, China

    Science.gov (United States)

    Ma, Mai-Juan; Yang, Yang; Wang, Hai-Bin; Zhu, Yi-Fan; Fang, Li-Qun; An, Xiao-Ping; Wan, Kang-Lin; Whalen, Christopher C.; Yang, Xiao-Xian; Lauzardo, Michael; Zhang, Zhi-Yi; Cao, Jin-Feng; Tong, Yi-Gang; Dai, Er-Hei; Cao, Wu-Chun

    2015-01-01

    Tuberculosis (TB) outbreak occurred in a boarding middle school of China. We explored its probable sources and quantified the transmissibility and pathogenicity of TB. Clinical evaluation, tuberculin skin testing and chest radiography were conducted to identify TB cases. Mycobacterium tuberculosis isolates underwent genotyping analysis to identify the outbreak source. A chain-binomial transmission model was used to evaluate transmissibility and pathogenicity of TB. A total of 46 active cases were ascertained among 258 students and 15 teachers/staff, an attack rate of 16.8%. Genetic analyses revealed two groups of M. tuberculosis cocirculating during the outbreak and possible importation from local communities. Secondary attack rates among students were 4.1% (2.9%, 5.3%) within grade and 7.9% (4.9%, 11%) within class. An active TB case was estimated to infect 8.4 (7.2, 9.6) susceptible people on average. The smear-positive cases were 28 (8, 101) times as infective as smear-negative cases. Previous BCG vaccination could reduce the probability of developing symptoms after infection by 70% (1.4%, 91%). The integration of clinical evaluation, genetic sequencing, and statistical modeling greatly enhanced our understanding of TB transmission dynamics. Timely diagnosis of smear-positive cases, especially in the early phase of the outbreak, is the key to preventing further spread among close contacts. PMID:25757905

  15. Investigation of contact line dynamics under a vapor bubble at boiling on the transparent heater

    Science.gov (United States)

    Surtaev, A. S.; Serdyukov, V. S.

    2018-01-01

    The paper presents the results of an experimental study of dynamics of vapor bubble growth and departure at pool boiling, obtained with the use of high-speed video recording and IR thermography. The study was carried out at saturated water boiling under the atmospheric pressure in the range of heat fluxes of 30-150 kW/m2. To visualize the process and determine the growth rates of the outer bubble diameter, microlayer region and dry spot area, transpa-rent thin film heater with the thickness of 1 μm deposited on sapphire substrate was used in the experiments, and video recording was performed from the bottom side of the heating surface. To study integral heat transfer as well as local non-stationary thermal characteristics, high-speed infrared thermography with a frequency of up to 1000 FPS was used. High-speed video recording showed that after formation of vapor bubble and microlayer region, dry spot appears in a short time (up to 1 ms) under the vapor bubble. Various stages of contact line boundary propagation were ob-served. It was shown that at the initial stage before the development of small-scale perturbations, the dry spot propaga-tion rate is constant. It was also showed that the bubble departure stage begins after complete evaporation of liquid in the microlayer region.

  16. Investigating contact toxicity of Geranium and Artemisia essential oils on Bemisia tabaci Gen.

    Directory of Open Access Journals (Sweden)

    Fatemeh Yarahmadi

    2013-04-01

    Full Text Available Objective: Sweet potato whitefly, Bemisia tabaci Gen. (B. tabaci, is one of the most important pests of various greenhouse crops in Iran. Nowadays, chemical insecticides are broadly used for control of the pests that causes risk to consumer's health. For the first time, contact toxicity of Pelargonium roseum Andrews and Artemisia sieberi Besser essential oils on B. tabaci and its possible application against the whitefly was evaluated in 2012. Materials and Methods: Essential oil with concentrations of 2500, 1250, 125, and 12 ppm were used. Infested leaves of greenhouse cucumber were treated by mentioned concentrations. After 24 hours, mortality of B. tabaci was recorded and compared after correcting by Abbot's formula. Results: Results showed that all concentrations of the essential oil could significantly reduce population of B. tabaci compared with the control treatment. Phytotoxicity of the treated leaves were recorded after 24, 48, and 72 hours and compared with the control. Concentrations of 2500, 1250, and 125 ppm caused severe phytotoxicity on greenhouse cucumber leaves and therefore are not suitable for greenhouse application. Phytotoxicity of 12 ppm was relatively low. Conclusions: This data implicated suitable protective effects of the essential oils to the pest infestation. Therefore, essential oils distillated from Geranium and Artemisia could be applied to control B. tabaci in greenhouse cucumber at V/V 12 ppm.

  17. DEM investigation of weathered rocks using a novel bond contact model

    Directory of Open Access Journals (Sweden)

    Zhenming Shi

    2015-06-01

    Full Text Available The distinct element method (DEM incorporated with a novel bond contact model was applied in this paper to shed light on the microscopic physical origin of macroscopic behaviors of weathered rock, and to achieve the changing laws of microscopic parameters from observed decaying properties of rocks during weathering. The changing laws of macroscopic mechanical properties of typical rocks were summarized based on the existing research achievements. Parametric simulations were then conducted to analyze the relationships between macroscopic and microscopic parameters, and to derive the changing laws of microscopic parameters for the DEM model. Equipped with the microscopic weathering laws, a series of DEM simulations of basic laboratory tests on weathered rock samples was performed in comparison with analytical solutions. The results reveal that the relationships between macroscopic and microscopic parameters of rocks against the weathering period can be successfully attained by parametric simulations. In addition, weathering has a significant impact on both stress–strain relationship and failure pattern of rocks.

  18. Investigation of telomere length and psychological stress in rape victims.

    Science.gov (United States)

    Malan, Stefanie; Hemmings, Sian; Kidd, Martin; Martin, Lindi; Seedat, Soraya

    2011-12-21

    Women are at an increased risk of depression and other mental health problems following rape. Various etiological factors for depression, including predisposing genetic factors, have been identified. Telomeres are repetitive nucleoprotein structures located at chromosomal ends that protect them from premature degradation. Telomeres reduce in length with each cell division, resulting in cellular senescence and apoptosis. Relative quantification of telomeric repeats using qPCR was performed to investigate whether shorter relative leukocyte telomere length (LTL) in a cohort of 64 rape victims was associated with resilience, the development of rape trauma-related major depressive disorder (MDD) or the development of posttraumatic stress disorder (PTSD) after 3 months. Out of the 64 participants, 23 participants were diagnosed with MDD at baseline and 31 after 3 months. Nine participants were diagnosed with PTSD (MDD and PTSD specifically related to the trauma). No significant associations were observed between relative LTL and resilience or the development of MDD at either baseline or after 3 months in this cohort. However, a marginally significant association was evident between relative LTL and PTSD status. The significant association between relative LTL and PTSD suggests that shorter relative LTL might have acted as a predisposing factor in the development of PTSD after a severely traumatic event. The results of this study indicate that telomere shortening may be an important marker of PTSD risk, with implications for early intervention and timely treatment, and as such warrant replication in a larger cohort. © 2011 Wiley Periodicals, Inc.

  19. Performance investigation of a solar-assisted direct contact membrane distillation system

    KAUST Repository

    Kim, Youngdeuk

    2013-01-01

    This paper presents a solar-assisted direct contact membrane distillation (DCMD) system with novel energy recovery concepts for a continuous 24-h-a-day operation. A temperature modulating scheme is introduced to the solar-thermal system that supplies feed seawater to the DCMD modules. This scheme attenuates extreme temperature fluctuations of the feed water by storing the collected energy during solar-peak hours and reutilizing it throughout the day. Thus, the energy savings is realized yet the feed seawater temperature is maintained within the desired range. Additionally, the system employs heat recovery from the permeate and brine streams to the feed seawater. The simulations for such a system with a shell-and-tube type DCMD modules are carried out to examine the spatial property variations and the sensitivity of system performance (i.e., transmembrane pressure, permeate flux and performance ratio) to the operating conditions (inlet temperature and flow rate) and the fiber dimensions (fiber length and packing density). It is found that there are trade-offs between mean permeate flux and performance ratio with respect to permeate inlet temperature and flow rate and between total distillate production and performance ratio with respect to packing density. For the solar-assisted DCMD system having evacuated-tube collectors of 3360m2 with 160m3 seawater storage tanks and 50 DCMD modules, the annual solar fraction and the collector efficiency are found to be 77% and 53%, respectively, whilst the overall permeate production capacity is 31m3/day. The overall specific thermal energy consumption of the DCMD system with heat recovery is found to be 436kWh/m3 and it is about 43% lower as compared to the system without heat recovery. It is observed that the specific thermal energy consumption decreases significantly by 55% with increased collector area from 1983m2 to 3360m2 whereas the specific electrical energy consumption increases slightly by 16%. © 2012 Elsevier B.V.

  20. BISON Investigation of the Effect of the Fuel- Cladding Contact Irregularities on the Peak Cladding Temperature and FCCI Observed in AFC-3A Rodlet 4

    Energy Technology Data Exchange (ETDEWEB)

    Medvedev, Pavel G. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-09-01

    The primary objective of this report is to document results of BISON analyses supporting Fuel Cycle Research and Development (FCRD) activities. Specifically, the present report seeks to provide explanation for the microstructural features observed during post irradiation examination of the helium-bonded annular U-10Zr fuel irradiated during the AFC-3A experiment. Post irradiation examination of the AFC-3A rodlet revealed microstructural features indicative of the fuel-cladding chemical interaction (FCCI) at the fuel-cladding interface. Presence of large voids was also observed in the same locations. BISON analyses were performed to examine stress and temperature profiles and to investigate possible correlation between the voids and FCCI. It was found that presence of the large voids lead to a formation of circumferential temperature gradients in the fuel that may have redirected migrating lanthanides to the locations where fuel and cladding are in contact. Resulting localized increase of lanthanide concentration is expected to accelerate FCCI. The results of this work provide important guidance to the post irradiation examination studies. Specifically, the hypothesis of lanthanides being redirected from the voids to the locations where the fuel and the cladding are in contact should be verified by conducting quantitative electron microscopy or Electron Probe Micro-Analyzer (EPMA). The results also highlight the need for computer models capable of simulating lanthanide diffusion in metallic fuel and establish a basis for validation of such models.

  1. Investigating Resulting Residual Stresses during Mechanical Forming Process

    Science.gov (United States)

    Akinlabi, Stephen A.; Fatoba, Olawale S.; Mashinini, Peter M.; Akinlabi, Esther T.

    2018-03-01

    Most manufacturing processes such as machining, welding, heat treatment, laser forming, laser cladding and, laser metal deposition, etc. are subjected to a form of heat or energy to change the geometrical shape thus changing the inherent engineering and structural properties of the material. These changes often cause the development of locked up stresses referred to as residual stresses as a result of these activities. This study reports on the residual stresses developed due to the mechanical forming process to maintain a suitable structural integrity for the formed components. The result of the analysis through the X-ray diffraction confirmed that residual stresses were induced in the manufactured parts and further revealed that residual stresses were compressive in nature as found in the parent material but with values less than the parent material.

  2. Optical stress investigations of notched bars with superimposed types of loads

    International Nuclear Information System (INIS)

    Richard, H.A.; Theis, W.

    1982-01-01

    Starting from the notch effect for various types of load, notch stresses are determined by optical methods for superimposed tensile and shearing stress and for superimposed tensile and bending stress. The superimposed stresses are induced by a device developed at the Technical Mechanics Department of Kaiserslautern University; only tensile stress needs to be applied to this testing device. The investigations have shown that in notched bars subject to superimposed tensile and shearing stress, stress increases will be higher than the maximum values of the two types of stress. For superimposed tensile and bending stress, notches on the outer side of the test piece and eccentric notches on the inner side may lead to a considerable stress increase. However, the stress distribution can be improved by an optimum arrangement of notches. (orig.) [de

  3. Hydrogen peroxide treatment on ZnO substrates to investigate the characteristics of Pt and Pt oxide Schottky contacts

    International Nuclear Information System (INIS)

    Tsai, Chia-Hung; Hung, Chen-I; Yang, Cheng-Fu; Houng, Mau-Phon

    2010-01-01

    We utilize hydrogen peroxide (H 2 O 2 ) treatment on (0 0 0 1) ZnO substrates to investigate the characteristics of Pt and Pt oxide Schottky contacts (SCs). X-ray rocking curves show the mosaicity structure becomes larger after H 2 O 2 treatment. Photoluminescence (PL) spectra show the yellow-orange emission peaking at ∼576-580 nm with respect to deep level of oxygen interstitials introduced by H 2 O 2 treatment. The threshold formation of ZnO 2 resistive layer on H 2 O 2 -treated ZnO for 45 min is observed from grazing-incidence X-ray diffraction. The better electrical characteristic is performed by Pt oxide SC with the larger barrier height (1.09 eV) and the lower leakage current (9.52 x 10 -11 A/cm 2 at -2 V) than Pt SC on the H 2 O 2 -treated ZnO for 60 min. X-ray photoelectron spectroscopy (XPS) and secondary ion mass spectrometer (SIMS) examinations indicate the promoted interface oxide bonding and Zn outdiffusion for Pt oxide contact, different from Pt contact. Based on current-voltage, capacitance-voltage, X-ray diffraction, PL spectra, XPS, and SIMS results, the possible mechanism for effective rectifying characteristic and enhanced Schottky fbehavior is given.

  4. NUMERICAL ANALYSIS OF THE STRESS-STRAIN STATE OF A ROPE STRAND WITH LINEAR CONTACT UNDER TENSION AND TORSION LOADING CONDITIONS

    Directory of Open Access Journals (Sweden)

    Evgenij Kalentev

    2017-06-01

    Full Text Available The paper presents the results of a numerical analysis of the stress-strain state of a rope strand with linear contact under tension and torsion loading conditions. Calculations are done using the ANSYS software package. Different approaches to calculation of the stress-strain state of ropes are reviewed, and their advantages and deficiencies are considered. The analysis of the obtained results leads us to the conclusion that the proposed method can be used in engineering calculations.

  5. Analytical and experimental investigation of the static friction regime for rubber-rigid ball contact

    NARCIS (Netherlands)

    Deladi, E.L.; de Rooij, Matthias B.; de Vries, Erik G.; de Vries, Erik G.; Schipper, Dirk J.

    2006-01-01

    The static friction regime is of great importance for systems requiring accurate positioning. The parameters of the static friction regime in terms of static friction force and limiting displacement before gross sliding are investigated for a rubber ball/metal flat configuration. Single-asperity

  6. Anteroposterior glide versus rotating platform low contact stress (LCS knee arthroplasty: a randomised controlled trial

    Directory of Open Access Journals (Sweden)

    Wynn-Jones Charles

    2007-08-01

    Full Text Available Abstract Background Fifty thousand knee replacements are performed annually in the UK at an estimated cost of £150 million. Post-operative improvement depends on a number of factors including implant design and patient associated factors. To our knowledge there are no published study's comparing the results of AP glide and rotating platform designs of LCS knee arthroplasty. Therefore we feel that a study is required to investigate and compare the effects of two types of LCS total knee arthroplasty on joint proprioception and range of motion. Methods/Design Patients will be randomised to receive either a LCS AP glide or Rotating platform prosthesis. Clinical scores (Oxford knee score, American knee society score, EuroQol, range of motion and proprioception will be assessed prior to and at 3,6, 12 and 24 months after the operation. Proprioception will be assessed in terms of absolute error angle (mean difference between the target angle and the response angle. Knee angles will be measured in degrees using an electromagnetic tracking device, Polhemus 3Space Fastrak that detects positions of sensors placed on the test limb. Student's t-test will be used to compare the mean of two groups. Discussion Evidence is lacking concerning the best prosthesis to use for patients undergoing total knee replacement. This pragmatic randomised trial will test the null hypothesis that anteroposterior glide LCS knee arthroplasty does not result in better post operative knee motion and proprioception as compared to rotating platform LCS knee. Trial Registration ISRCTN52943804

  7. Empirical Investigation of Electricity Self-Generation in a Lubricated Sliding–Rolling Contact

    Energy Technology Data Exchange (ETDEWEB)

    Ščepanskis, Mihails; Gould, Benjamin; Greco, Aaron

    2017-07-20

    The paper reports the empirical observations of voltage generation in a lubricated tribocontact with different oils altering load, sliding and temperature. The investigation is done in the context of research of the root cause of white etching cracks (WEC) failure in bearings. Tested oils of different additive packages found completely different electrical behavior. The oil, which is known to produce WECs in laboratory tests, demonstrated non-zero voltage generation

  8. An Investigation of the Correlation among Sources of Stress, Perceived Stress, and Coping styles in High School Students

    Directory of Open Access Journals (Sweden)

    Farhadh Asghari

    2016-07-01

    Full Text Available Background and Objectives: Coping with stress is an important issue, especially in regard to source of stress and perceived stress in adolescence period. In this research, the correlation among stress sources, perceived stress, and coping styles was investigated in high school students. Methods: The present research was a descriptive correlational study. The research sample consisted of 575 high school students from the families of personnel of Bushehr University of Medical Sciences in education year 2014-15 who were selected by multistage cluster sampling method. Stress source scale, perceived stress scale and Tehran coping styles scale, were used for data collection. The data were analyzed using statistical methods, including Pearson correlation coefficient and multivariate regression analysis. Results: In this study, 50% of students had perceived stress higher than cut-off point. Stress sources of students were related to school and maturity. There was a positive correlation between problem-oriented coping style and perceived stress, and there was a negative and inverse correlation between problem-oriented coping style and stress related to school and maturity. There was a positive correlation between positive emotion-oriented coping style and perceived stress, but there was a negative and inverse correlation between problem-oriented coping style and stress related to school and maturity. There was no significant correlation between emotion-oriented coping style and stress related to school, maturity, family, and peers. There was a positive correlation between negative emotion-oriented coping style and stress related to school, maturity, and peers. Conclusion: According to the findings of this study, the level of correlation was not significant and no significant relationship could be found between the variables with this level of correlation. Therefore, it is suggested that more extensive researches be conducted on the relationship between

  9. Three dimensional contact stresses under the LINTRACK wide base single tyres, measured with the Vehicle-Road Surface Pressure Transducer Array (VRSPTA) system in South Africa

    CSIR Research Space (South Africa)

    De Beer, Morris

    1996-11-01

    Full Text Available testing. The vertical, transverse (or lateral) and longitudinal contact stresses between the tyres and the pavement were measured with the Vehicle-Road Surface Pressure Transducer Array (VRSPTA), developed in South Africa as part of the ongoing Accelerated...

  10. Investigation of residual stress in laser welding dissimilar materials

    International Nuclear Information System (INIS)

    Mirim, Denilson de Camargo; Oliveira, Rene Ramos de; Berretta, Jose Roberto; Rossi, Wagner de; Lima, Nelson Batista de; Delijaicov, Sergio; Gomes, Diego Oliva

    2010-01-01

    One of the most critical problems found in the different materials welding is the residual stress formation, that happens mainly for the fact of those materials they possess coefficients of thermal expansion and different thermal conductivities. Like this in this work the residual tension was evaluated in the technique of welding laser among the steel low carbon, AISI 1010 and AISI 304. The materials were united for it welds autogenous of top with a laser of continuous Nd:YAG in that they were varied the potency, speed and the focus of the laser stayed constant in relation to surface of the sample. The main objective of the study went identification and to analysis of the residual stress in HAZ on both sides of seem. Um planning factorial of two factors at two levels each it was executed for optimization the combination of the factors potency and speed. The obtained answers were the residual stress in different depths in HAZ. In the surface of the sample measures of residual stress were accomplished by the technique of X-ray diffraction. The hole drilling strain gage method it was applied to measure the residual stress on both sides of the union. The results were analyzed using the variance analysis and the statistical regression based on the different influences of the entrance and combination of the factors in the residual stress generated in that union. The results indicate that the development of models can foresee the answers satisfactorily. (author)

  11. Contact pressure distribution during the polishing process of ceramic tiles: A laboratory investigation

    International Nuclear Information System (INIS)

    Sani, A S A; Hamedon, Z; Azhari, A; Sousa, F J P

    2016-01-01

    During the polishing process of porcelain tiles the difference in scratching speed between innermost and peripheral abrasives leads to pressure gradients linearly distributed along the radial direction of the abrasive tool. The aim of this paper is to investigate such pressure gradient in laboratory scale. For this purpose polishing tests were performed on ceramic tiles according to the industrial practices using a custom-made CNC tribometer. Gradual wear on both abrasives and machined surface of the floor tile were measured. The experimental results suggested that the pressure gradient tends to cause an inclination of the abraded surfaces, which becomes stable after a given polishing period. In addition to the wear depth of the machined surface, the highest value of gloss and finest surface finish were observed at the lowest point of the worn out surface of the ceramic floor tile corresponding to the point of highest pressure and lowest scratching speed. (paper)

  12. A Hydraulic Stress Measurement System for Deep Borehole Investigations

    Science.gov (United States)

    Ask, Maria; Ask, Daniel; Cornet, Francois; Nilsson, Tommy

    2017-04-01

    Luleå University of Technology (LTU) is developing and building a wire-line system for hydraulic rock stress measurements, with funding from the Swedish Research Council and Luleå University of Technology. In this project, LTU is collaborating with University of Strasbourg and Geosigma AB. The stress state influences drilling and drillability, as well as rock mass stability and permeability. Therefore, knowledge about the state of in-situ stress (stress magnitudes, and orientations) and its spatial variation with depth is essential for many underground rock engineering projects, for example for underground storage of hazardous material (e.g. nuclear waste, carbon dioxide), deep geothermal exploration, and underground infrastructure (e.g. tunneling, hydropower dams). The system is designed to conduct hydraulic stress testing in slim boreholes. There are three types of test methods: (1) hydraulic fracturing, (2) sleeve fracturing and (3) hydraulic testing of pre-existing fractures. These are robust methods for determining in situ stresses from boreholes. Integration of the three methods allows determination of the three-dimensional stress tensor and its spatial variation with depth in a scientific unambiguously way. The stress system is composed of a downhole and a surface unit. The downhole unit consists of hydraulic fracturing equipment (straddle packers and downhole imaging tool) and their associated data acquisition systems. The testing system is state of the art in several aspects including: (1) Large depth range (3 km), (2) Ability to test three borehole dimensions (N=76 mm, H=96 mm, and P=122 mm), (3) Resistivity imager maps the orientation of tested fracture; (4) Highly stiff and resistive to corrosion downhole testing equipment; and (5) Very detailed control on the injection flow rate and cumulative volume is obtained by a hydraulic injection pump with variable piston rate, and a highly sensitive flow-meter. At EGU General Assembly 2017, we would like to

  13. Evaluation of prolidase activity and oxidative stress in patients with oral lichen planus and oral lichenoid contact reactions.

    Science.gov (United States)

    Batu, Şule; Ofluoğlu, Duygu; Ergun, Sertan; Warnakulasuriya, Saman; Uslu, Ezel; Güven, Yegane; Tanyeri, Hakkı

    2016-04-01

    The aim of this study was to evaluate prolidase activity and oxidative stress in patients with oral lichen planus (OLP) and oral lichenoid contact reactions (OLCR) using serum and salivary samples and to compare these biomarkers with each other as well as with a group of healthy subjects in order to be able to opine their role in the estimation of OLP and OLCR. Eighteen recently diagnosed patients with OLP, 32 patients with OLCR and 18 healthy controls with matched periodontal status were recruited to the study. Prolidase activity, lipid peroxidation product malondialdehyde (MDA), sialic acid (SA), and advanced oxidation protein products (AOPPs) levels in both serum and saliva were determined. Additionally, salivary flow rate and its buffering capacity were estimated. Statistical analyses were performed using the chi-square test, t-test, Mann-Whitney U-test, and Spearman's rho correlation coefficient. No statistically significant differences were observed between the study groups and the control group regarding to the basic characteristics and the periodontal status (P > 0.05). There were no statistically significant differences between OLP and OLCR groups regarding to the distribution of lesions' type, severity, and location (P > 0.05). No significant differences were found between the two study groups with regard to Prolidase activity, MDA, SA, and AOPPs (P ˃ 0.05), whereas statistically significant differences were found between the two study groups and the control group with regard to all evaluated parameters except of serum prolidase (P ˂ 0.01). Moderate correlation was found between salivary MDA and the OLP/OLCR lesion severity, whereas a weak correlation was observed between serum SA and the OLP/OLCR lesion severity (P ˂ 0.05). The findings of this study suggest an increased prolidase activity and oxidative stress and imbalance in the antioxidant defense system in biological fluids of patients with OLP and OLCR when compared with the healthy subjects

  14. An Investigation of the Relation Between Contact Thermometry and Dew-Point Temperature Realization

    Science.gov (United States)

    Benyon, R.; Böse, N.; Mitter, H.; Mutter, D.; Vicente, T.

    2012-09-01

    Precision optical dew-point hygrometers are the most commonly used transfer standards for the comparison of dew-point temperature realizations at National Metrology Institutes (NMIs) and for disseminating traceability to calibration laboratories. These instruments have been shown to be highly reproducible when properly used. In order to obtain the best performance, the resistance of the platinum resistance thermometer (PRT) embedded in the mirror is usually measured with an external, traceable resistance bridge or digital multimeter. The relation between the conventional calibration of miniature PRTs, prior to their assembly in the mirrors of state-of-the-art optical dew-point hygrometers and their subsequent calibration as dew-point temperature measurement devices, has been investigated. Standard humidity generators of three NMIs were used to calibrate hygrometers of different designs, covering the dew-point temperature range from -75 °C to + 95 °C. The results span more than a decade, during which time successive improvements and modifications were implemented by the manufacturer. The findings are presented and discussed in the context of enabling the optimum use of these transfer standards and as a basis for determining contributions to the uncertainty in their calibration.

  15. Thermal stresses investigation of a gas turbine blade

    Science.gov (United States)

    Gowreesh, S.; Pravin, V. K.; Rajagopal, K.; Veena, P. H.

    2012-06-01

    The analysis of structural and thermal stress values that are produced while the turbine is operating are the key factors of study while designing the next generation gas turbines. The present study examines structural, thermal, modal analysis of the first stage rotor blade of a two stage gas turbine. The design features of the turbine segment of the gas turbine have been taken from the preliminary design of a power turbine for maximization of an existing turbojet engine with optimized dump gap of the combustion chamber, since the allowable temperature on the turbine blade dependents on the hot gas temperatures from the combustion chamber. In the present paper simplified 3-D Finite Element models are developed with governing boundary conditions and solved using the commercial FEA software ANSYS. As the temperature has a significant effect on the overall stress on the rotor blades, a detail study on mechanical and thermal stresses are estimated and evaluated with the experimental values.

  16. Investigation of Stress Indices and Directional Loading of Eccentric Reducers

    International Nuclear Information System (INIS)

    Carter, R.; Wais, E.A.; Rodabaugh, E.C.

    2003-01-01

    OAK- B135 Engineering for fatigue is an essential concern in piping systems. Addressing this concern, the ASME Section III and ANSI B31.1 Codes provide stress indices and stress intensification factors (SIFs) to be used in the design and evaluation of Class 1, 2 and 3 systems. In recent research cosponsored by EPRI and the U.S. DOE, new test data have been developed for comparison with the ASME stress indices and SIFs. This report presents the results of fatigue tests on eccentric reducers, taking into account the directionality of the loading. As detailed in the report, the results can help to improve the evaluation of reducers and can help to reduce unnecessary conservatism in piping system design

  17. Investigation of stress distribution in normal and oblique partial penetration. Welded nozzles by 3-D photoelastic stress freezing method

    International Nuclear Information System (INIS)

    Miyamoto, H.; Kubo, M.; Katori, T.

    1981-01-01

    Experimental investigation by 3-D photoelasticity has been carried out to measure the stress distribution of partial penetration welded nozzles attached to the bottom head of a pressure vessel. A 3-D photoelastic stress freezing method was chosen as the most effective means of observation of the stress distribution in the vicinity of the nozzle/wall weld. The experimental model was a 1:20 scale spherical bottom head. Both an axisymmetric nozzle and an asymmetric nozzle were investigated. Epoxy resin, which is a thermosetting plastic, was used as the model material. The oblique effect was examined by comparing the stress distribution of the asymmetric nozzle with that of the axisymmetric nozzle. Furthermore, the experimental results were compared with the analytical results using 3-D finite element method (FEM). The stress distributions obtained from the frozen fringe pattern of the 3-D photoelastic model were in good agreement with those by 3-D FEM. (orig.)

  18. Investigation of stresses in facetted glass shell structures

    DEFF Research Database (Denmark)

    Bagger, Anne; Jönsson, Jeppe; Wester, Ture

    2007-01-01

    by in-plane forces in the facets and the transfer of distributed in-plane forces across the joints. It is described how these facets work structurally, specifically how bending moments develop and cause possible stress concentrations in the corners, which are subjected to uplift. Apart from local...... bending moments from distributed load, other types of bending moments are likely to occur, especially if the shell has areas of low stiffness, for example along a free edge. A facetted shell structure has been modelled in a finite element program, and the resulting stresses are presented and discussed....

  19. Numerical investigation of stress singularities in cracked bimaterial body

    Czech Academy of Sciences Publication Activity Database

    Náhlík, Luboš; Šestáková, Lucie; Hutař, Pavel

    2008-01-01

    Roč. 385-387, - (2008), s. 125-128 ISSN 1013-9826. [International Conference on Fracture and Damage Mechanics /7./. Seoul, 09.09.2008-11.09.2008] R&D Projects: GA AV ČR(CZ) KJB200410803; GA ČR GP106/06/P239; GA ČR GA106/08/1409 Institutional research plan: CEZ:AV0Z20410507 Keywords : bimaterial interface * stress singularity exponent * corner singularity * vertex singularity * general singular stress concentrator Subject RIV: JL - Materials Fatigue, Friction Mechanics

  20. Investigations of some rock stress measuring techniques and the stress field in Norway

    Energy Technology Data Exchange (ETDEWEB)

    Hanssen, Tor Harald

    1997-12-31

    Rock stresses are important to the safe construction and operation of all man-made structures in rock, whether In mining, civil or petroleum engineering. The crucial issue is their relative magnitude and orientation. This thesis develops equipment and methods for further rock stress assessment and reevaluates existing overcoring rock stress measurements, and relates this information to the present geological setting. Both laboratory work and field work are involved. In the field, rock stresses are measured by the overcoring and the hydraulic fracturing technique. An observation technique for assessing likely high stresses is developed. The field data refer to several hydropower projects and to some offshore hydrocarbon fields. The principal sections are: (1) Tectonic setting in the western Fennoscandia, (2) Triaxial rock stress measurements by overcoring using the NTH cell (a strain gauge cell developed at the Norwegian technical university in Trondheim and based on the CSIR cell of the South African Council for Scientific and Industrial Research), (3) Laboratory testing of the NTH cell, (4) Quality ranking of stresses measured by the NTH cell, (4) Recalculated rock stresses and implications to the regional stress field, (5) Hydraulic fracturing stress measurements. 113 refs., 98 figs., 62 tabs.

  1. Investigations of some rock stress measuring techniques and the stress field in Norway

    Energy Technology Data Exchange (ETDEWEB)

    Hanssen, Tor Harald

    1998-12-31

    Rock stresses are important to the safe construction and operation of all man-made structures in rock, whether In mining, civil or petroleum engineering. The crucial issue is their relative magnitude and orientation. This thesis develops equipment and methods for further rock stress assessment and reevaluates existing overcoring rock stress measurements, and relates this information to the present geological setting. Both laboratory work and field work are involved. In the field, rock stresses are measured by the overcoring and the hydraulic fracturing technique. An observation technique for assessing likely high stresses is developed. The field data refer to several hydropower projects and to some offshore hydrocarbon fields. The principal sections are: (1) Tectonic setting in the western Fennoscandia, (2) Triaxial rock stress measurements by overcoring using the NTH cell (a strain gauge cell developed at the Norwegian technical university in Trondheim and based on the CSIR cell of the South African Council for Scientific and Industrial Research), (3) Laboratory testing of the NTH cell, (4) Quality ranking of stresses measured by the NTH cell, (4) Recalculated rock stresses and implications to the regional stress field, (5) Hydraulic fracturing stress measurements. 113 refs., 98 figs., 62 tabs.

  2. Investigation of surface residual stress profile on martensitic stainless steel weldment with X-ray diffraction

    Directory of Open Access Journals (Sweden)

    I.I. Ahmed

    2018-04-01

    Full Text Available The development of residual stresses during fabrication is inevitable and often neglected with dire consequences during the service life of the fabricated components. In this work, the surface residual stress profile following the martensitic stainless steel (MSS pipe welding was investigated with X-ray diffraction technique. The results revealed the presence of residual stresses equilibrated across the weldment zones. Tensile residual stress observed in weld metal was balanced by compressive residual stresses in the parent material on the opposing sides of weld metal. Keywords: Residual stress, Weld, Stainless steel, X-ray, HAZ

  3. Which doctors and with what problems contact a specialist service for doctors? A cross sectional investigation

    Directory of Open Access Journals (Sweden)

    von der Tann Matthias

    2007-08-01

    suicide; however, low rates of severe psychiatric illness were detected. These findings suggest that MedNet clients represent both ends of the spectrum of severity, enabling early clinical engagement for a significant proportion of cases that is of importance both in terms of personal health and protecting patient care, and providing a timely intervention for those who are at risk, a group for whom rapid intervention services are in need and an area that requires further investigation in the UK.

  4. Investigation into the behaviour of bentonite in contact with magnetite and iron under the conditions of a final repository

    International Nuclear Information System (INIS)

    Mueller-Vonmoos, M.; Kahr, G.; Bucher, F.; Madsen, F.; Mayor, P.A.

    1991-05-01

    This report presents the results of investigations into how magnetite and iron affect the swelling behaviour of the Na-bentonite MX-80 and the Ca-bentonite Montigel. The experiments were conducted under conditions similar to those expected in a repository and covered cation exchange capacity, exchangeable cations and the swelling behaviour of the Na-bentonite MX-80 and the Ca-bentonite Montigel. Waste disposal is assumed to occur at a temperature of 80 o C under an anoxic atmosphere. In addition to this, the behaviour of trivalent iron in the interlayer space of montmorillonite was investigated. The investigations confirmed that contact between iron and bentonite under such conditions leads mainly to formation of magnetite and hydrogen. Montmorillonite does not take up iron by cation-exchange, either on contact with magnetite or with iron itself. The trivalent iron is unstable in the interlayer space of the montmorillonite and is exchanged mainly for aluminium; no change in the interlayer charge can be determined in such a case. It is therefore to be assumed that the aluminium is taken up from the edges of the clay particles into the interlayer space, but that no chlorite formation can be observed during this process. At 80 o C and 150 o C, the swelling pressures of the highly compacted bentonite-iron samples, related to the dry density of the bentonites, corresponded more or less to the swelling pressures of the untreated bentonites. The swelling pressure of the Fe(III)-bentonites was around 50% higher. It is assumed that this is mainly due to the high hydration energy of the iron and aluminium ions. 6 figs., 6 tabs., 13 refs

  5. [Reporting and interviewing delays in contact investigation of tuberculosis, Seine-Saint-Denis, from April to June 2008].

    Science.gov (United States)

    Fourcade, C; Le Mab, G; Vincenti-Delmas, M

    2012-08-01

    In France, one of the main components of the tuberculosis control program is contact investigation around all tuberculosis cases. For this purpose, all cases of tuberculosis are to be reported to the health authorities (Centre de lutte antituberculeuse) within 48 hours of diagnosis. The Centre then conducts an initial patient interview within three days of the report in order to establish a list of contacts requiring evaluation. Given that a delay in action may play a role in the continued disease transmission, it appeared necessary to study more precisely this subject in a French area with a high annual new case rate, the Seine-Saint-Denis. A descriptive and retrospective study included all tuberculosis cases reported and received between April and June 2008. The two periods were statistically analyzed with socio-demographic, clinical-biological and investigations data. For the 148 cases reported during this period, a first interview was required for 123. The average time period between initiation of anti-tuberculosis therapy and reception of the report was 11.08 days. The overly long delay could be explained in part by the inappropriate use of the notification form (45.5%) designed for non-urgent collection of epidemiological data, and in part by the underuse of telephone reporting (8.1%). The first interview was not performed for 19 cases and the average time between reception of the notification and the patient interview was 6.58 days. Having the patient's phone number appeared essential to meet the deadline (odds ratio: 5.3; 95% confidence interval [1.7-16.9]). Few interviews were made in person. Shortage in financial and human resources and the delayed case reporting could be part of the explanations. Deadlines were met much better for cases of pleuro-pulmonary tuberculosis compared with other localizations, for reporting (39.2% versus 13.5%, preports some risk factors associated with delayed action and highlights the need for improved reporting of

  6. An investigation into psychological stress and its determinants in Xinjiang desert oil workers

    Science.gov (United States)

    Ning, Li; Guan, Suzhen; Liu, Jiwen

    2018-01-01

    Abstract The present study aims to investigate psychological stress and its determinants in Xinjiang field oil workers. Specifically, we aim to elucidate the mechanisms underlying psychological stress by comprehensively and quantitatively evaluating the processes involved in psychological stress, the factors which influence it, and their relationship. The participants were 1200 field oil workers in Xinjiang who had been in service for at least 1 year. A structural equation model based on data from the symptom checklist, social support research scale, personality questionnaire, occupational burnout questionnaire, and occupational stress questionnaire was constructed to investigate the social (environmental) factors that influence physiological stress and the interplay among these factors. The positive incidence of psychological stress in the field oil workers in Xinjiang was 12.54%. The structural equation model indicated that the main factors that influenced psychological stress in these workers included social support (0.077), occupational role (0.165), personal strain response (0.139), personality (0.189), and occupational burnout (0.380). Among these factors, occupational role, personality, and occupational burnout had a relatively strong predictive power for psychological stress reactions. The cortisol level in workers with positive psychological stress was significantly higher than that in workers with negative psychological stress. Occupational stress, personality, and occupational burnout exert an impact on psychological stress in field oil workers. Therefore, interventions to address these factors should be taken to reduce the incidence of psychological stress. PMID:29642166

  7. Theoretical investigation on current-voltage characteristics in all-carbon molecular device with different contact geometries

    International Nuclear Information System (INIS)

    Ye Fuqiu; Fan Zhiqiang; He Jun; Peng Jun; Tang Liming

    2012-01-01

    Applying nonequilibrium Green's functions in combination with the first-principles density-functional theory, we investigate electronic transport properties of an all-carbon molecular device consisting of one phenalenyl molecule and two zigzag graphene nanoribbons. The results show that the electronic transport properties are strongly dependent on the contact geometry and device's currents can drop obviously when the connect sites change from second-nearest sites from the central atom of the molecule (S site) to third-nearest sites from the central atom of the molecule (T site). More importantly, the negative differential resistance behavior is only observed on the negative bias region when the molecule connects the graphene nanoribbons through two T sites.

  8. Ultracoatings: Enabling Energy and Power Solutions in High Contact Stress Environments through next-generation Nanocoatings Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Clifton B. Higdon III

    2012-03-20

    A review of current commercially available, industrial-grade, low friction coatings will show that interfacial contact pressures nearing 1GPa ({approx}150ksi) inherently limit surface engineering solutions like WC, TiN, TiAlN, and so forth. Extremely hard coatings, then, are often pursued as the principle path, although they too are not without significant limitations. A majority of these compounds are inherently brittle in nature or may not pair well with their mating substrate. In either case, their durability in high contact stress environments is compromised. In parallel to thin film coatings, many conventional surface treatments do not yield an interface hard enough to withstand extreme stresses under load. New research into advanced, nanocomposite materials like (Ti, Zr)B2 shows great promise. Bulk compacts of this compound have demonstrated an order of magnitude better wear resistance than current offerings, notably materials like tungsten carbide. At a laboratory level, the (Ti,Zr)B2 nanocomposite material exhibited abrasive and erosive wear resistance nearly ten times better than existing mixed-phase boride systems. In ASTM abrasion and erosion testing, these new compositions exhibit wear resistance superior to other known advanced materials such as RocTec 500 and 'Borazon' cubic boron nitride. Many significant challenges exist for mass production of (Ti, Zr)B2, one of which is the necessary processing technology that is capable of minimizing deleterious impurity phases. Secondly, this material's performance is derived from a synergistic effect of the two materials existing as a single phase structure. While the individual constituents of TiB2 and ZrB2 do yield improvements to wear resistance, their singular effects are not as significant. Lastly, deposition of this material on a commercial level requires thorough knowledge of nanocomposite boride solids; the benefits associated with these innovative new materials are just being realized

  9. Frictional contact behaviour of the tyre: the effect of tread slip on the in-plane structural deformation and stress field development

    Science.gov (United States)

    Tsotras, Achillefs; Mavros, George

    2010-08-01

    The analysis of the in-plane deformation of the tyre in relation to the frictional contact between the road and the tread is a crucial first step in the understanding of its contribution to the longitudinal dynamics of a vehicle. In this work, the physical mechanism of the generation of the two-dimensional contact pressure distribution for a non-rolling tyre is studied. Towards this aim, a physical tyre model is constructed, consisting of an analytical ring under pretension, a non-linear sidewall foundation, and a discretised foundation of viscoelastic elements representing the tread. Tread behaviour is examined first, with focus on the development of shear micro-slip. The tread simulation is enhanced with the combination of radial and tangential tread elements and the benefits of such an approach are identified. Subsequently, the contact of the complete model is examined by implementing an algorithm for transient simulations in the time domain. The effects of the imposed vertical load and sidewall non-linearity on the contact stress and strain fields are identified. The modelling approach is validated by comparison with published experimental results. The physical mechanism that couples the torsional and horizontal/vertical deformations of the carcass with the frictional forces at the tread is identified and discussed in detail. The proposed modelling approach is found appropriate for the description of the development of the two-dimensional contact pressure field as a function of the frictional potential of the contact.

  10. Hypothalamic-Pituitary-Adrenal Reactivity to Acute Stress: an Investigation into the Roles of Perceived Stress and Family Resources.

    Science.gov (United States)

    Obasi, Ezemenari M; Shirtcliff, Elizabeth A; Cavanagh, Lucia; Ratliff, Kristen L; Pittman, Delishia M; Brooks, Jessica J

    2017-11-01

    Rurally situated African Americans suffer from chronic exposure to stress that may have a deleterious effect on health outcomes. Unfortunately, research on potential mechanisms that underlie health disparities affecting the African American community has received limited focus in the scientific literature. This study investigated the relationship between perceived stress, family resources, and cortisol reactivity to acute stress. A rural sample of African American emerging adults (N = 60) completed a battery of assessments, the Trier Social Stress Test (TSST), and provided four samples of salivary cortisol: prior to receiving TSST instructions, prior to conducting the speech task, immediately following the TSST, and 15-20 min following the TSST. As predicted, cortisol levels increased in response to a controlled laboratory inducement of acute stress. Moreover, diminished levels of family resources were associated with blunted cortisol reactivity to acute stress. Of note, higher levels of perceived stress over the past month and being male were independently associated with lower levels of cortisol at baseline. Lack of family resources had a blunting relationship on the hypothalamic-pituitary-adrenal axis reactivity. These findings provide biomarker support for the relationship between family resources-an indicator associated with social determinants of health-and stress physiology within a controlled laboratory experiment. Identifying mechanisms that work toward explanation of within-group differences in African American health disparities is both needed and informative for culturally informed prevention and intervention efforts.

  11. Investigation of the primary plasticisers present in polyvinyl chloride (PVC) products currently authorised as food contact materials.

    Science.gov (United States)

    Carlos, Katherine S; de Jager, Lowri S; Begley, Timothy H

    2018-03-15

    PVC is a common food contact material that is usually plasticised to increase its flexibility. Phthalates are one class of chemical compounds that are often used as plasticisers in PVC in a wide range of industries. They may be used in packaging materials for foods and can also be found in components of certain food processing equipment such as conveyor belts and tubing. Transfer of plasticisers from packaging to foods can occur. In recent years, there has been increased interest in understanding the health effects of phthalates, as well as the possible human exposure levels. However, there is limited information available about the routes of exposure to phthalates. In July 2014, the Chronic Hazard Advisory Panel (CHAP) produced a report for the U.S. Consumer Product Safety Commission detailing the potential health hazards of phthalates and phthalate alternatives. This report listed diet as one factor contributing greater than or equal to 10% of total phthalate exposure. As a result of this report, the U.S. Food and Drug Administration (FDA) is interested in determining the types of the primary plasticiser present in food packaging and processing materials as well as their concentrations. An investigation was conducted of 56 different samples of PVC food packaging and food processing materials available in the US market using a solvent extraction and GC-MS analysis. Nine different plasticisers including three phthalates, di(2-ethylhexyl) phthalate, diisononyl phthalate and diisodecyl phthalate, were identified in the products tested. The plasticiser concentrations ranged from 1 to 53% depending on the types of food contact materials and the type of plasticiser. Overall, it appears that manufacturers are switching away from phthalates as their primary plasticiser to alternate compounds such as ESBO, ATBC, DEHT, DINCH, DEHA and DINA.

  12. Development of a novel non-contact inspection technique to detect micro cracks under the surface of a glass substrate by thermal stress-induced light scattering method

    Science.gov (United States)

    Sakata, Yoshitaro; Terasaki, Nao; Nonaka, Kazuhiro

    2017-05-01

    Fine polishing techniques, such as a chemical mechanical polishing treatment, are important techniques in glass substrate manufacturing. However, these techniques may cause micro cracks under the surface of glass substrates because they used mechanical friction. A stress-induced light scattering method (SILSM), which was combined with light scattering method and mechanical stress effects, was proposed for inspecting surfaces to detect polishing-induced micro cracks. However, in the conventional SILSM, samples need to be loaded with physical contact, and the loading point is invisible in transparent materials. Here, we introduced a novel non-contact SILSM using a heating device. A glass substrate was heated first, and then the light scattering intensity of micro cracks was detected by a cooled charge-couple device camera during the natural cooling process. Results clearly showed during the decreasing surface temperature of a glass substrate, appropriate thermal stress is generated for detecting micro cracks by using the SILSM and light scattering intensity from micro cracks changes. We confirmed that non-contact thermal SILSM (T-SILSM) can detect micro cracks under the surface of transparent materials.

  13. Investigating the pathogenesis of posttraumatic stress disorder with neuroimaging.

    Science.gov (United States)

    Pitman, R K; Shin, L M; Rauch, S L

    2001-01-01

    Rapidly evolving brain neuroimaging techniques such as magnetic resonance imaging (MRI) and positron emission tomography (PET) are proving fruitful in exploring the pathogenesis and pathophysiology of posttraumatic stress disorder (PTSD). Structural abnormalities in PTSD found with MRI include nonspecific white matter lesions and decreased hippocampal volume. These abnormalities may reflect pretrauma vulnerability to develop PTSD, or they may be a consequence of traumatic exposure, PTSD, and/or PTSD sequelae. Functional neuroimaging symptom provocation and cognitive activation paradigms using PET measurement of regional cerebral blood flow have revealed greater activation of the amygdala and anterior paralimbic structures (which are known to be involved in processing negative emotions such as fear), greater deactivation of Broca's region (motor speech) and other nonlimbic cortical regions, and failure of activation of the cingulate cortex (which possibly plays an inhibitory role) in response to trauma-related stimuli in individuals with PTSD. Functional MRI research has shown the amygdala to be hyperresponsive to fear-related stimuli in this disorder. Research with PET suggests that cortical, notably hippocampal, metabolism is suppressed to a greater extent by pharmacologic stimulation of the noradrenergic system in persons with PTSD. The growth of knowledge concerning the anatomical and neurochemical basis of this important mental disorder will hopefully eventually lead to rational psychological and pharmacologic treatments.

  14. An Electropalatographic Investigation of Linguopalatal Contact in Participants with Acquired Apraxia of Speech: A Quantitative and Qualitative Analysis

    Science.gov (United States)

    Bartle-Meyer, Carly J.; Murdoch, Bruce E.; Goozee, Justine V.

    2009-01-01

    The current study aimed to provide a comprehensive analysis of linguopalatal contact patterns in participants with acquired apraxia of speech (AOS). Tongue-to-palate contacts were recorded for three participants with AOS during consonant singletons and consonant clusters using the Reading Electropalatograph (EPG3) system. Amount and pattern of…

  15. Simulation of thermal stresses in anode-supported solid oxide fuel cell stacks. Part II: Loss of gas-tightness, electrical contact and thermal buckling

    Science.gov (United States)

    Nakajo, Arata; Wuillemin, Zacharie; Van herle, Jan; Favrat, Daniel

    Structural stability issues in planar solid oxide fuel cells arise from the mismatch between the coefficients of thermal expansion of the components. The stress state at operating temperature is the superposition of several contributions, which differ depending on the component. First, the cells accumulate residual stresses due to the sintering phase during the manufacturing process. Further, the load applied during assembly of the stack to ensure electric contact and flatten the cells prevents a completely stress-free expansion of each component during the heat-up. Finally, thermal gradients cause additional stresses in operation. The temperature profile generated by a thermo-electrochemical model implemented in an equation-oriented process modelling tool (gPROMS) was imported into finite-element software (ABAQUS) to calculate the distribution of stress and contact pressure on all components of a standard solid oxide fuel cell repeat unit. The different layers of the cell in exception of the cathode, i.e. anode, electrolyte and compensating layer were considered in the analysis to account for the cell curvature. Both steady-state and dynamic simulations were performed, with an emphasis on the cycling of the electrical load. The study includes two different types of cell, operation under both thermal partial oxidation and internal steam-methane reforming and two different initial thicknesses of the air and fuel compressive sealing gaskets. The results generated by the models are presented in two papers: Part I focuses on cell cracking. In the present paper, Part II, the occurrences of loss of gas-tightness in the compressive gaskets and/or electrical contact in the gas diffusion layer were identified. In addition, the dependence on temperature of both coefficients of thermal expansion and Young's modulus of the metallic interconnect (MIC) were implemented in the finite-element model to compute the plastic deformation, while the possibilities of thermal buckling

  16. Ultraviolet photoelectron spectroscopy investigation of interface formation in an indium-tin oxide/fluorocarbon/organic semiconductor contact

    International Nuclear Information System (INIS)

    Tong, S.W.; Lau, K.M.; Sun, H.Y.; Fung, M.K.; Lee, C.S.; Lifshitz, Y.; Lee, S.T.

    2006-01-01

    It has been demonstrated that hole-injection in organic light-emitting devices (OLEDs) can be enhanced by inserting a UV-illuminated fluorocarbon (CF x ) layer between indium-tin oxide (ITO) and organic hole-transporting layer (HTL). In this work, the process of interface formation and electronic properties of the ITO/CF x /HTL interface were investigated with ultraviolet photoelectron spectroscopy. It was found that UV-illuminated fluorocarbon layer decreases the hole-injection barrier from ITO to α-napthylphenylbiphenyl diamine (NPB). Energy level diagrams deduced from the ultraviolet photoelectron spectroscopy (UPS) spectra show that the hole-injection barrier in ITO/UV-treated CF x /NPB is the smallest (0.46 eV), compared to that in the ITO/untreated CF x /NPB (0.60 eV) and the standard ITO/NPB interface (0.68 eV). The improved current density-voltage (I-V) characteristics in the UV-treated CF x -coated ITO contact are consistent with its smallest barrier height

  17. An Exploratory Investigation of the Role of Parenting Stress in Relationship Focused Intervention

    Science.gov (United States)

    Alquraini, Turki; Mahoney, Gerald

    2015-01-01

    Background: Mothers of young children with Pervasive Developmental Disorders (PDD) and other disabilities (DD) have been reported to experience high levels of stress. This investigation examined the effects of parental stress on mother's participation in a Relationship Focused intervention (RFI). Methods: Mothers and young children who had either…

  18. Complex posttraumatic stress disorder: an exploratory investigation of PTSD and DES NOS among Dutch war veterans

    NARCIS (Netherlands)

    Jongedijk, R. A.; Carlier, I. V.; Schreuder, B. J.; Gersons, B. P.

    1996-01-01

    The recently developed concept Disorder of Extreme Stress Not Otherwise Specified (DES NOS) or complex posttraumatic stress disorder (complex PTSD) is designed to encompass long-standing symptoms not present in PTSD. An exploratory investigation of PTSD and DES NOS was performed with the Structured

  19. Investigation of Thermal Stress Distribution in Laser Spot Welding Process

    OpenAIRE

    Osamah F. Abdulateef

    2009-01-01

    The objective of this paper was to study the laser spot welding process of low carbon steel sheet. The investigations were based on analytical and finite element analyses. The analytical analysis was focused on a consistent set of equations representing interaction of the laser beam with materials. The numerical analysis based on 3-D finite element analysis of heat flow during laser spot welding taken into account the temperature dependence of the physical properties and latent heat of transf...

  20. To Investigate the Absorption, Dynamic Contact Angle and Printability Effects of Synthetic Zeolite Pigments in an Inkjet Receptive Coating

    Science.gov (United States)

    Jalindre, Swaraj Sunil

    Ink absorption performance in inkjet receptive coatings containing synthetic zeolite pigments was studied. Coating pigment pore and particle size distribution are the key parameters that influence in modifying media surface properties, thus affecting the rate of ink penetration and drying time (Scholkopf, et al. 2004). The primary objective of this study was: (1) to investigate the synthetic zeolite pigment effects on inkjet ink absorption, dynamic contact angle and printability, and (2) to evaluate these novel synthetic zeolite pigments in replacing the fumed silica pigments in conventional inkjet receptive coatings. In this research study, single pigment coating formulations (in equal P:B ratio) were prepared using microporous synthetic zeolite pigments (5A, Organophilic and 13X) and polyvinyl alcohol (PVOH) binder. The laboratory-coated samples were characterized for absorption, air permeance, roughness, drying time, wettability and print fidelity. Based on the rheological data, it was found that the synthetic zeolite formulated coatings depicted a Newtonian flow behavior at low shear; while the industry accepted fumed silica based coatings displayed a characteristically high pseudoplastic flow behavior. Our coated samples generated using microporous synthetic zeolite pigments produced low absorption, reduced wettability and accelerated ink drying characteristics. These characteristics were caused due to the synthetic zeolite pigments, which resulted in relatively closed surface structure coated samples. The research suggested that no single selected synthetic zeolite coating performed better than the conventional fumed silica based coatings. Experimental data also showed that there was no apparent relationship between synthetic zeolite pigment pore sizes and inkjet ink absorption. For future research, above coated samples should be evaluated for pore size distribution using Mercury Porosimeter, which quantifies surface porosity of coated samples. This presented

  1. Poly(3-hydroxybutyrate) production in an integrated electromicrobial setup: Investigation under stress-inducing conditions

    KAUST Repository

    Al Rowaihi, Israa Salem; Paillier, Alexis; Rasul, Shahid; Karan, Ram; Grö tzinger, Stefan Wolfgang; Takanabe, Kazuhiro; Eppinger, Jö rg

    2018-01-01

    extorquens AM1 and Cupriavidus necator H16. This setup allows to investigate the influence of different stress conditions, such as coexisting electrolysis, relatively high salinity, nutrient limitation, and starvation, on the production of PHB. The overall

  2. Preparation and investigation of burried metal/molecule contact interfaces with surface sensitive methods; Praeparation und Untersuchung verborgener Metall/Molekuel-Kontaktgrenzflaechen mit oberflaechensensitiven Methoden

    Energy Technology Data Exchange (ETDEWEB)

    Vrdoljak, Pavo

    2011-05-13

    The present thesis establishes an optimised concept of a delamination technique suitable for ultra high vacuum (UHV) with which model systems of buried interfaces were made accessible for surface sensitive methods which were applied to investigate their electronic and topographical properties. A primary focus of this work is on the question how buried interfaces could be accessed successfully for surface sensitive methods using buried metal/NTCDA and metal/PTCDA interfaces as model systems. Contacts of approximately 10 x 15 mm{sup 2} in size were accessed. The second focus of the thesis is on the investigation of the electronical and topographical properties of the buried interfaces, for which some similarities between delaminated metal (Au,Ag)/ PTCDA- and Ag/NTCDA interfaces were found: After the delamination of top-contacts there were inhomogeneous layers of molecules on the metal contacts. Whereas PTCDA covered metal contacts had thicker molecular layers (4-5 ML PTCDA on Ag), NTCDA covered contacts showed only one monolayer coverage over large areas of at least 2 mm in diameter. Regions with multilayer coverage showed smooth surfaces whereas metal surfaces showed a fissured, meander-like and rough surface. Both contact systems also had in common that the adhesive made PES investigations of valence states very difficult. Furthermore, it was possible to thin out the molecular layers thermally but afterwards no valence states could be measured. Investigating in-situ delaminated buried interfaces, the focus was on metal (Au,Ag)/PTCDA interfaces first. The molecular layers could be successfully desorbed thermally at 260 C to 1-3 monolayers so that valence states were investigated. The spectra of the in-situ delaminated and thermally desorbed Ag/PTCDA contact were noticeably broadened so that the positions of HOMO and FLUMO could only be estimated at 1.9 eV and 0.7 eV, respectively. Additionally, interfaces of Ag/NTCDA contacts were investigated. With UPS it was found

  3. Asymmetric contacts on a single SnO₂ nanowire device: an investigation using an equivalent circuit model.

    Science.gov (United States)

    Huh, Junghwan; Na, Junhong; Ha, Jeong Sook; Kim, Sangtae; Kim, Gyu Tae

    2011-08-01

    Electrical contacts between the nanomaterial and metal electrodes are of crucial importance both from fundamental and practical points of view. We have systematically compared the influence of contact properties by dc and EIS (Electrochemical impedance spectroscopy) techniques at various temperatures and environmental atmospheres (N(2) and 1% O(2)). Electrical behaviors are sensitive to the variation of Schottky barriers, while the activation energy (E(a)) depends on the donor states in the nanowire rather than on the Schottky contact. Equivalent circuits in terms of dc and EIS analyses could be modeled by Schottky diodes connected with a series resistance and parallel RC circuits, respectively. These results can facilitate the electrical analysis for evaluating the nanowire electronic devices with Schottky contacts.

  4. Investigation into Variations of Welding Residual Stresses and Redistribution Behaviors for Different Repair Welding Widths

    International Nuclear Information System (INIS)

    Park, Chiyong; Lee, Hweesueng; Huh, Namsu

    2014-01-01

    In this study, we investigated the variations in welding residual stresses in dissimilar metal butt weld due to width of repair welding and re-distribution behaviors resulting from similar metal welding (SMW) and mechanical loading. To this end, detailed two-dimensional axi-symmetric finite element (FE) analyses were performed considering five different repair welding widths. Based on the FE results, we first evaluated the welding residual stress distributions in repair welding. We then investigated the re-distribution behaviors of the residual stresses due to SMW and mechanical loads. It is revealed that large tensile welding residual stresses take place in the inner surface and that its distribution is affected, provided repair welding width is larger than certain value. The welding residual stresses resulting from repair welding are remarkably reduced due to SMW and mechanical loading, regardless of the width of the repair welding

  5. Occupational allergic contact dermatitis caused by sterile non-latex protective gloves: clinical investigation and chemical analyses.

    Science.gov (United States)

    Pontén, Ann; Hamnerius, Nils; Bruze, Magnus; Hansson, Christer; Persson, Christina; Svedman, Cecilia; Thörneby Andersson, Kirsten; Bergendorff, Ola

    2013-02-01

    An increased frequency of occupational contact hand dermatitis among surgical operating theatre personnel has been noticed. To evaluate patients with occupational contact dermatitis caused by their rubber gloves, and to describe a method for analysing the content of the allergens in the gloves. Patch tests were performed with the baseline series, a rubber chemical series, and the patients' own gloves. A method for analysing 1,3-diphenylguanidine (DPG) and cetylpyridinium chloride in the gloves was developed. Contact allergy to thiuram mix was found in 8 of 16 patients, whereas 12 of 16 patients reacted to DPG. In 7 of 8 patients, contact allergy to cetylpyridinium chloride was found. In the patients' gloves, cetylpyridinium chloride and DPG were detected at higher concentrations on the inside of the gloves than on the outside. Most patients had worked for decades in their present occupations, but their hand dermatitis had only been present for months. Contact allergy to DPG in gloves has been disputed, but, in this study, we were able to confirm the presence of DPG and cetylpyridinium chloride in the causative gloves by using a modified method for the analysis. The presence of these chemicals in gloves caused an increase in occupational contact dermatitis in surgical operating theatre personnel. © 2012 John Wiley & Sons A/S.

  6. Investigating the Dendritic Growth during Full Cell Cycling of Garnet Electrolyte in Direct Contact with Li Metal.

    Science.gov (United States)

    Aguesse, Frederic; Manalastas, William; Buannic, Lucienne; Lopez Del Amo, Juan Miguel; Singh, Gurpreet; Llordés, Anna; Kilner, John

    2017-02-01

    All-solid-state batteries including a garnet ceramic as electrolyte are potential candidates to replace the currently used Li-ion technology, as they offer safer operation and higher energy storage performances. However, the development of ceramic electrolyte batteries faces several challenges at the electrode/electrolyte interfaces, which need to withstand high current densities to enable competing C-rates. In this work, we investigate the limits of the anode/electrolyte interface in a full cell that includes a Li-metal anode, LiFePO 4 cathode, and garnet ceramic electrolyte. The addition of a liquid interfacial layer between the cathode and the ceramic electrolyte is found to be a prerequisite to achieve low interfacial resistance and to enable full use of the active material contained in the porous electrode. Reproducible and constant discharge capacities are extracted from the cathode active material during the first 20 cycles, revealing high efficiency of the garnet as electrolyte and the interfaces, but prolonged cycling leads to abrupt cell failure. By using a combination of structural and chemical characterization techniques, such as SEM and solid-state NMR, as well as electrochemical and impedance spectroscopy, it is demonstrated that a sudden impedance drop occurs in the cell due to the formation of metallic Li and its propagation within the ceramic electrolyte. This degradation process is originated at the interface between the Li-metal anode and the ceramic electrolyte layer and leads to electromechanical failure and cell short-circuit. Improvement of the performances is observed when cycling the full cell at 55 °C, as the Li-metal softening favors the interfacial contact. Various degradation mechanisms are proposed to explain this behavior.

  7. Residual stress investigation of copper plate and canister EB-Welds Complementary Results

    International Nuclear Information System (INIS)

    Gripenberg, H.

    2009-03-01

    The residual stresses in copper as induced by EB-welding were studied by specimens where the weld had two configurations: either a linear or a circumferential weld. This report contains the residual stress measurements of two plates, containing linear welds, and the full-scale copper lid specimen to which a hollow cylinder section had been joined by a circumferential EB-weld. The residual stress state of the EB-welded copper specimens was investigated by X-ray diffraction (XRD), hole drilling (HD) ring core (RC) and contour method (CM). Three specimens, canister XK010 and plates X251 and X252, were subjected to a thorough study aiming at quantitative determination of the residual stress state in and around the EB-welds using XRD for surface and HD and RC for spatial stress analysis. The CM maps one stress component over a whole cross section. The surface residual stresses measured by XRD represent the machined condition of the copper material. The XRD study showed that the stress changes towards compression close to the weld in the hollow cylinder, which indicates shrinkage in the hoop direction. According to the same analogy, the shrinkage in the axial direction is much smaller. The HD measurements showed that the stress state in the base material is bi-axial and, in terms of von Mises stress, 50 MPa for the plates and 20 MPa for the cylinder part of the canister. The stress state in the EB-welds of all specimens differs clearly from the stress state in the base material being more tensile, with higher magnitudes of von Mises stress in the plate than in the canister welds. The HD and RC results were obtained using linear elastic theory. The RC measurements showed that the maximum principal stress in the BM is close to zero near the surface and it becomes slightly tensile, 10 MPa, deeper under the surface. Welding pushed the general stress state towards tension with the maximum principal stress reaching 50 MPa, deeper than 5 mm below the surface in the weld. The

  8. SAXS investigations on lipid membranes under osmotic stress

    Energy Technology Data Exchange (ETDEWEB)

    Rubim, R.L.; Vieira, V.; Gerbelli, B.B.; Teixeira da Silva, E.R.; Oliveira, C.L.P.; Oliveira, E.A. [Universidade de Sao Paulo (USP), Sao Paulo, SP (Brazil)

    2012-07-01

    Full text: In this work we, experimentally, investigate the interactions between lipid bilayers. A structural characterization is performed by small angle x-ray scattering (SAXS) on multilamellar systems under known osmotic pressure. Changes in the composition of membranes can modify their mechanical properties and structural parameters, like the flexibility of these membranes, which plays a key role on the determination of the tridimensional organization of bilayers. The membranes are composed of soya lecithin, where the major component is DPPC (Dipalmitoylphosphatidylcholine), and fatty acids are incorporated to the membrane in different concentrations, in order to turn the membrane more fluid. The membranes are inserted in a solution of PVP [poly(vinyl-pyrrolidone) - 40000] and the polymer will apply an osmotic pressure on them. The osmotic pressure is controlled by preparing PVP solutions of desired composition and, as we know the concentration of polymer in solution, we can obtain the intensity of the osmotic pressure. SAXS experiments were done in order to determine the distance between the bilayer. From the position of the Bragg peaks, the lamellar periodicity (the thickness of the membranes plus their distance of separation) was determined. Using theoretical model for the form and structure factors we fitted those experimental data and determined the thickness of the membranes. The distance between the membranes was controlled by the osmotic pressure (P) applied to the membranes and, for a given pressure, we determine the distance between the bilayers (a) on equilibrium. The experimental curve P(a) is theoretically described by the different contributions from van der Waals, hydration and fluctuation forces. From the fitting of experimental curves, relevant parameters characterizing the strength of the different interactions are obtained, such as Hamaker and rigidity constant [2, 3]. We observe that the separation between the bilayers on equilibrium is

  9. Stress-In-Motion (SIM) system for capturing tri-axial tyre-road interaction in the contact patch

    CSIR Research Space (South Africa)

    De Beer, Morris

    2013-08-01

    Full Text Available elements has a 9.7 mm diameter circular contact surface area ( 73.9 mm2) and is dimensionally optimised, allowing measurements in various tyre rolling conditions on a textured measuring surface. The textured surface induces some pre-conditioning of tyre...

  10. Investigation into ammonia stress on Cyperus alternifolius and its impact on nutrient removal in microcosm experiments.

    Science.gov (United States)

    Tao, Wendong; Han, Jianqiu; Li, Hanyan

    2015-11-01

    Ammonia stress on plants has been investigated at discrete ammonia concentrations in constructed wetlands. This study introduced a Gaussian model to simulate the kinetics of ammonia stress and investigated reversible and irreversible ammonia stress on Cyperus alternifolius in wetland-like microcosms. Ammonia stress on plant weight increase and oxygen release potential started at weekly ammonia concentrations of 27 and 28 mg N/L, reached 50% inhibition at 178 and 158 mg N/L, and resulted in lethal effects at 311 and 303 mg N/L, respectively. The stress of one-time ammonia concentrations up to 400 mg N/L could be reversible. Ammonia concentrations constantly above 219 mg N/L exerted irreversible stress. In the microcosms with ammonia concentrations above the 50% inhibition levels, plants played a minor role in nitrogen removal. Nitrogen removal performance was not affected considerably by ammonia stress. Orthophosphate removal was suppressed by ammonia stress due to less plant uptake. Design and operation of constructed wetlands should consider wastewater ammonia concentration so that the integrity of constructed wetland ecosystems can be maintained. Copyright © 2015 Elsevier Ltd. All rights reserved.

  11. Investigation of subsurface fatigue crack in PEEK shaft under one-point rolling contact by using 2.5D layer observation method

    Directory of Open Access Journals (Sweden)

    KOIKE Hitonobu

    2017-01-01

    Full Text Available Subsurface fatigue cracks under rolling contact area of the PEEK shaft against an alumina bearing’s ball were investigated for application of frictional part in mechanical element in special situations such as chemical environments. In order to explore the flaking process of the PEEK shaft, the rolling contact fatigue tests were carried out by using a one-point radial loading rolling contact machine. The flaking occurred on the rolling track of the PEEK shaft at approximate 4⨉105 fatigue cycles. The subsurface fatigue crack propagation was investigated by using 2.5-Dimension layer observation method. The flaking was caused by the propagations of surface cracks and subsurface shear cracks, and the flaking shape was half-ellipse. Moreover, beach marks as fatigue crack propagation in the flaking were observed.

  12. Performance test of diamond-like carbon films for lubricating ITER blanket maintenance equipment under GPa-level high contact stress

    International Nuclear Information System (INIS)

    Takeda, Nobukazu; Kakudate, Satoshi; Nakahira, Masataka; Shibanuma, Kiyoshi

    2007-01-01

    Diamond-like carbon (DLC) coating was tested as a candidate solid lubricant for transmission gears of the maintenance equipment of the blanket of the ITER instead of an oil lubricant. The wear tests using the pin-on-disk method were performed on disks with SCM440 and SNCM420 as the base materials and coated with soft, layered, and hard DLCs. All cases satisfied the required allowable contact stress (2 GPa) and lifetime (10 4 cycles), and therefore the feasibility of the DLC coating was validated. Among the three types of DLCs, the soft DLC showed the best performance. (author)

  13. [Eyelid hygiene for contact lens wearers with blepharitis. Comparative investigation of treatment with baby shampoo versus phospholipid solution].

    Science.gov (United States)

    Khaireddin, R; Hueber, A

    2013-02-01

    Blepharitis due to Meibom gland dysfunction (MGD) is presumed to be one of the main reasons for dry eye symptoms which occur in up to 50% of contact lens users. Thus, MGD presumably plays an important role in dry eye in contact lens wearers. In the present prospective, randomized and double blind trial the efficacy of two established treatment options for MGD and blepharitis was evaluated in symptomatic contact lens wearers. In this prospective, randomized 2-centre trial 53 symptomatic contact lens wearers suffering from blepharitis were included. Patients were randomly selected for two treatment groups: group A performed lid margin hygiene using the commonly recommended mild baby shampoo (Bübchen Kinder Shampoo-extra augenmild, Bübchen Werk Ewald Hermes Pharmazeutische Fabrik GmbH, Soest, Germany) and group B performed lid margin hygiene using a phospholipid-liposome solution specially designed for lid hygiene (Blepha Cura, Optima, Moosburg/Wang, Germany), each for 4 weeks. Before as well as 4 weeks after initiation of this study the following tests were performed: standardized subjective assessment using the ocular surface disease index, non-invasive break-up time (NIBUT) and objective evaluation of lid-parallel conjunctival folds (LIPCOF) and further lid margin criteria by double blinded evaluation of slit lamp photographs. Of the 53 symptomatic contact lens wearers suffering from blepharitis 21 (39,6%) were randomly selected for treatment group A and 32 (60.4%) for group B. In both treatment groups there was objective and subjective improvement of symptoms of dry eye in contact lens wearers. Interestingly, there was a significantly greater improvement, subjective as well as objective, in treatment group B which used the phospholipidliposome solution for lid margin hygiene compared to group A using baby shampoo. Although both therapies improved symptoms of dry eye due to blepharitis in symptomatic contact lens wearers, patients using phospholipid

  14. Cyclic voltammetric investigations of microstructured and platinum-covered glassy carbon electrodes in contact with a polymer electrolyte membrane

    Energy Technology Data Exchange (ETDEWEB)

    Scherer, G G; Veziridis, Z; Staub, M [Paul Scherrer Inst. (PSI), Villigen (Switzerland); Freimuth, H [Inst. fuer Mikrotechnik Mainz IMM, Mainz (Germany)

    1997-06-01

    Model gas diffusion electrodes were prepared by microstructuring glassy carbon surfaces with high aspect ratios and subsequent deposition of platinum. These electrodes were characterized by hydrogen under-potential deposition (H-upd) in contact with a polymer electrolyte membrane employing cyclic voltametry. H-upd was found on platinum areas not in direct contact to the solid electrolyte, as long as a continuous platinum-path existed. A carbon surface between platinum acts as barrier for H-upd. (author) 4 figs., 5 refs.

  15. Investigation of an alternative generic model for predicting pharmacokinetic changes during physiological stress.

    Science.gov (United States)

    Peng, Henry T; Edginton, Andrea N; Cheung, Bob

    2013-10-01

    Physiologically based pharmacokinetic models were developed using MATLAB Simulink® and PK-Sim®. We compared the capability and usefulness of these two models by simulating pharmacokinetic changes of midazolam under exercise and heat stress to verify the usefulness of MATLAB Simulink® as a generic PBPK modeling software. Although both models show good agreement with experimental data obtained under resting condition, their predictions of pharmacokinetics changes are less accurate in the stressful conditions. However, MATLAB Simulink® may be more flexible to include physiologically based processes such as oral absorption and simulate various stress parameters such as stress intensity, duration and timing of drug administration to improve model performance. Further work will be conducted to modify algorithms in our generic model developed using MATLAB Simulink® and to investigate pharmacokinetics under other physiological stress such as trauma. © The Author(s) 2013.

  16. An empirical investigation on factors influencing on work stress: Evidence from banking industry

    Directory of Open Access Journals (Sweden)

    Alireza Davoudzadeh Moghaddam

    2015-08-01

    Full Text Available An individual with a career faced with various career challenges may experience work-related stress. Work related stress is a factor that threatens employees’ health. The most common negative consequences of stress are particularly the deterioration of performance and efficiency, decrease in productivity and quality of customer’s services, which results in health problems. Work-related stress is a global issue, and banks are no exception. This paper presents a survey to investigate the influencing factors on work stress in banking industry. The study designs a questionnaire and distributes it among 200 randomly selected bank department managers in city of Tehran, Iran. Using principle component analysis, the study has detected five factors including organizational characteristics, external environment, work content, personal characteristics and top management.

  17. Relationship between the real contact area and contact force in pre-sliding regime

    International Nuclear Information System (INIS)

    Song Baojiang; Yan Shaoze

    2017-01-01

    The pre-sliding regime is typically neglected in the dynamic modelling of mechanical systems. However, the change in contact state caused by static friction may decrease positional accuracy and control precision. To investigate the relationship between contact status and contact force in pre-sliding friction, an optical experimental method is presented in this paper. With this method, the real contact state at the interface of a transparent material can be observed based on the total reflection principle of light by using an image processing technique. A novel setup, which includes a pair of rectangular trapezoidal blocks, is proposed to solve the challenging issue of accurately applying different tangential and normal forces to the contact interface. The improved Otsu’s method is used for measurement. Through an experimental study performed on polymethyl methacrylate (PMMA), the quantity of contact asperities is proven to be the dominant factor that affects the real contact area. The relationship between the real contact area and the contact force in the pre-sliding regime is studied, and the distribution of static friction at the contact interface is qualitatively discussed. New phenomena in which the real contact area expands along with increasing static friction are identified. The aforementioned relationship is approximately linear at the contact interface under a constant normal pressure, and the distribution of friction stress decreases from the leading edge to the trailing edge. (paper)

  18. Less immune activation following social stress in rural vs. urban participants raised with regular or no animal contact, respectively.

    Science.gov (United States)

    Böbel, Till S; Hackl, Sascha B; Langgartner, Dominik; Jarczok, Marc N; Rohleder, Nicolas; Rook, Graham A; Lowry, Christopher A; Gündel, Harald; Waller, Christiane; Reber, Stefan O

    2018-04-30

    Urbanization is on the rise, and environments offering a narrow range of microbial exposures are linked to an increased prevalence of both physical and mental disorders. Human and animal studies suggest that an overreactive immune system not only accompanies stress-associated disorders but might even be causally involved in their pathogenesis. Here, we show in young [mean age, years (SD): rural, 25.1 (0.78); urban, 24.5 (0.88)] healthy human volunteers that urban upbringing in the absence of pets ( n = 20), relative to rural upbringing in the presence of farm animals ( n = 20), was associated with a more pronounced increase in the number of peripheral blood mononuclear cells (PBMCs) and plasma interleukin 6 (IL-6) concentrations following acute psychosocial stress induced by the Trier social stress test (TSST). Moreover, ex vivo-cultured PBMCs from urban participants raised in the absence of animals secreted more IL-6 in response to the T cell-specific mitogen Con A. In turn, antiinflammatory IL-10 secretion was suppressed following TSST in urban participants raised in the absence of animals, suggesting immunoregulatory deficits, relative to rural participants raised in the presence of animals. Questionnaires, plasma cortisol, and salivary α-amylase, however, indicated the experimental protocol was more stressful and anxiogenic for rural participants raised in the presence of animals. Together, our findings support the hypothesis that urban vs. rural upbringing in the absence or presence of animals, respectively, increases vulnerability to stress-associated physical and mental disorders by compromising adequate resolution of systemic immune activation following social stress and, in turn, aggravating stress-associated systemic immune activation. Copyright © 2018 the Author(s). Published by PNAS.

  19. Investigations into stress shell characteristics of surrounding rock in fully mechanized top-coal caving face

    Energy Technology Data Exchange (ETDEWEB)

    Xie, G.X.; Chang, J.C.; Yang, K. [Anhui University of Science and Technology, Huainan (China)

    2009-01-15

    A key issue in underground mining is to understand and master the evolving patterns of stress induced by mining, and to control and utilize the action of rock pressure. Numerical and physical modeling tests have been carried out to investigate the distribution patterns of stress in the rock surrounding a fully mechanized top-coal caving (FMTC) face. The results showed that a macro-stress shell composed of high stress exists in the rock surrounding an FMTC face. The stress of the shell is higher than its internal and external stress and the stresses at its skewback producing abutment pressure for the surrounding rock. The stress shell lies in the virgin coal and rock mass in the vicinity of the face and its sagging zone. The stress shell, which bears and transfers the loads of overlying strata, acts as the primary supporting system of forces, and is the corpus of characterizing three-dimensional and macro-rock pressure distribution of mining face. Its external and internal shape changes with the variations in the working face structure as the face advances. Within the low-stress zone inside the stress shell, another structure, i.e. voussoir beam, which only bears parts of the load from the lower-lying strata, will produce periodic pressures on the face instead of great dynamic pressure even if the beam ruptures and loses stability. The results show that the FMTC face is situated within the lower-stress zone, which is protected by the stress shell of the overlying surrounding rock. We give an explanation of lower occurrence of rock pressure on FMTC faces, and reveal the mechanical nature of the top coal of an FMTC face acting as a 'cushion'. The strata behaviors of the face and its neighboring gates are under control of the stress shell. Drastic rock pressure in mine may occur when the balance of the stress shell is destruction or the forces system of the stress shell transfers. Crown Copyright

  20. Introduction to contact mechanics

    CERN Document Server

    Fischer-Cripps, Anthony C

    2000-01-01

    Contact mechanics deals with the elastic or plastic contact between two solid objects, and is thus intimately connected with such topics as fracture, hardness, and elasticity.This text, intended for advanced undergraduates, begins with an introduction to the mechanical properties of materials, general fracture mechanics, and fractures in brittle solids.This is followed by a detailed discussion of stresses and the nature of elastic and elastic-plastic contact.

  1. [An investigation of occupational stress, social support, and happiness of junior civil servants].

    Science.gov (United States)

    Wang, Lingfeng

    2015-10-01

    To investigate the current status of occupational stress, social support, and happiness in junior civil servants in northern Zhejiang Province, China, and to investigate the relationship between occupational stress, social support and happiness. A total of 360 junior civil servants from below-county-level administrative organizations in Huzhou, Jiaxing, and Hangzhou were surveyed using the job stress questionnaire and social support rating scale for civil servants. The total average score of occupational stress in junior civil servants was 2.52 ± 0.48, indicating a moderate level of occupational stress; career prospects topped the rank list of sources of occupational stress with a score of 2.90 ± 0.60; different generations showed significant differences in the sources and total average scores of occupational stress, with the scores of the 1980s, 1990s, 1970s, 1950s, and 1960s groups decreasing in the same order (Phappiness among the junior civil servants were relatively low, with scores of 38.43 ± 8.38 and 76.88 ± 12.77, respectively; different generations also showed significant differences, with the scores of 1980s, 1990s, 1970s, 1950s, and 1960s groups increasing in the same order (Phappiness than males (Phappiness of junior civil servants (r=0.405~0.571, Phappiness of junior civil servants.

  2. [Investigation on job stress of pediatricians and nurses working in pediatric department].

    Science.gov (United States)

    Yao, San-qiao; Tian, Ling; Pang, Bao-dong; Bai, Yu-ping; Fan, Xue-yun; Shen, Fu-hai; Jin, Yu-lan

    2008-09-01

    To investigate the occupational stressors and modifiers of pediatricians and nurses in order to find the measurements for control of the job stress. 427 pediatricians and nurses working in five hospitals of a city served as subjects. Of them, the staff in section of pharmacy and toll offices in each hospital mentioned above served as control group. The General Job Stress Questionnaire was used to investigate the job stress by self-assessment. The scores of job demand, job risk, drug using, daily job stress, positive feelings, patient A behavior, physical environment and feeling balance in pediatricians and nurses were higher than those of control group, but the scores of job-person conflict, environmental control, technology utility, mental health, responsibility on things were lower than those of control group (Pdepression in nurses were higher than those of pediatricians, and non-work activities, job risk and daily life stress were lower than those of doctors (Pwork job, lower job control, more job risk, job future ambiguous, poorer social support, lower job locus control and lower self-esteem. The stress degree of pediatric staff is higher than that of controls. The pediatricians have more job stress than that of nurses. The main stressors of pediatric staff are job monotony, higher job demand, more non-worker activity, lower job control, higher job risk and ambiguous job future. The main modifiers are good social support, external job locus of control and higher self-esteem.

  3. Fracture permeability under effect of normal and shear stress: A preliminary experimental investigation

    International Nuclear Information System (INIS)

    Mohanty, S.; Manteufel, R.D.; Chowdhury, A.H.

    1995-01-01

    The change in fracture permeability under mechanical loads have been investigated. An apparatus has been developed to measure change in fracture permeability, when a single fracture is subjected to normal and shear stress. Both radial and linear flow experiments have been conducted by modifying a direct shear test apparatus. Preliminary results suggest a 35-percent change in fracture permeability under normal stress to 8 MPa and nearly 350 percent under shear displacement of 9.9254 m (1 in.) at 5 MPa normal stress. Effort is underway to separate the permeability change due to gouge material production from that of due to dilation

  4. Job Stress and Dyadic Synchrony in Police Marriages: A Preliminary Investigation

    Science.gov (United States)

    ROBERTS, NICOLE A.; LEONARD, RACHEL C.; BUTLER, EMILY A.; LEVENSON, ROBERT W.; KANTER, JONATHAN W.

    2015-01-01

    Despite reports documenting adverse effects of stress on police marriages, few empirical studies focus on actual emotional behaviors of officers and spouses. In this preliminary investigation, 17 male police officers and their nonpolice wives completed daily stress diaries for 1 week and then participated in a laboratory-based discussion about their respective days. Conversations were video-recorded and coded for specific emotional behaviors reflecting hostility and affection, which are strong predictors of marital outcomes. We examined associations between officers’ job stress (per diaries and the Police Stress Survey) and couples’ emotional behavior (mean levels and behavioral synchrony) using a dyadic repeated measures design capitalizing on the large number of observations available for each couple (1020 observations). When officers reported more job stress, they showed less hostility, less synchrony with their wives’ hostility, and more synchrony with their wives’ affection; their wives showed greater synchrony with officers’ hostility and less synchrony with officers’ affection. Therefore, for officers, greater job stress was associated with less behavioral negativity, potentially less attunement to wives’ negativity, but potentially greater attunement to wives’ affection—perhaps a compensatory strategy or attempt to buffer their marriage from stress. These attempts may be less effective, however, if, as our synchrony findings may suggest, wives are focusing on officers’ hostility rather than affection. Although it will be important to replicate these results given the small sample, our findings reveal that patterns of behavioral synchrony may be a key means to better understand how job stress exacts a toll on police marriages. PMID:23763686

  5. Language Contact.

    Science.gov (United States)

    Nelde, Peter Hans

    1995-01-01

    Examines the phenomenon of language contact and recent trends in linguistic contact research, which focuses on language use, language users, and language spheres. Also discusses the role of linguistic and cultural conflicts in language contact situations. (13 references) (MDM)

  6. Investigating interfacial contact configuration and behavior of single-walled carbon nanotube-based nanodevice with atomistic simulations

    Energy Technology Data Exchange (ETDEWEB)

    Cui, Jianlei, E-mail: cjlxjtu@mail.xjtu.edu.cn; Zhang, Jianwei [Xi’an Jiaotong University, State Key Laboratory for Manufacturing Systems Engineering (China); He, Xiaoqiao, E-mail: bcxqhe@cityu.edu.hk [City University of Hong Kong, Department of Architecture and Civil Engineering (Hong Kong); Mei, Xuesong; Wang, Wenjun [Xi’an Jiaotong University, State Key Laboratory for Manufacturing Systems Engineering (China); Yang, Xinju [Fudan University, State Key Laboratory of Surface Physics and Department of Physics (China); Xie, Hui; Yang, Lijun; Wang, Yang [Harbin Institute of Technology, State Key Laboratory of Robotics and Systems (China)

    2017-03-15

    Carbon nanotubes (CNTs), including single-walled carbon nanotubes (SWNTs) and multi-walled carbon nanotubes (MWNTs), are considered to be the promising candidates for next-generation interconnects with excellent physical and chemical properties ranging from ultrahigh mechanical strength, to electrical properties, to thermal conductivity, to optical properties, etc. To further study the interfacial contact configurations of SWNT-based nanodevice with a 13.56-Å diameter, the corresponding simulations are carried out with the molecular dynamic method. The nanotube collapses dramatically into the surface with the complete collapse on the Au/Ag/graphite electrode surface and slight distortion on the Si/SiO{sub 2} substrate surface, respectively. The related dominant mechanism is studied and explained. Meanwhile, the interfacial contact configuration and behavior, depended on other factors, are also analyzed in this article.

  7. CONTACT RESISTANCE MODELING

    Directory of Open Access Journals (Sweden)

    S. V. LOSKUTOV

    2018-05-01

    Full Text Available Purpose. To determine the contribution of the real contact spots distribution in the total conductivity of the conductors contact. Methodology. The electrical contact resistance research was carried out on models. The experimental part of this work was done on paper with a graphite layer with membranes (the first type and conductive liquids with discrete partitions (the second type. Findings. It is shown that the contact electrical resistance is mainly determined by the real area of metal contact. The experimental dependence of the electrical resistance of the second type model on the distance between the electrodes and the potential distribution along the sample surface for the first type model were obtained. The theoretical model based on the principle of electric field superposition was considered. The dependences obtained experimentally and calculated by using the theoretical model are in good agreement. Originality. The regularity of the electrical contact resistance formation on a large number of membranes was researched for the first time. A new model of discrete electrical contact based on the liquid as the conducting environment with nuclear membrane partitions was developed. The conclusions of the additivity of contact and bulk electrical resistance were done. Practical value. Based on these researches, a new experimental method of kinetic macroidentation that as a parameter of the metal surface layer deformation uses the real contact area was developed. This method allows to determine the value of average contact stresses, yield point, change of the stress on the depth of deformation depending on the surface treatment.

  8. Investigation of reciprocating conformal contact of piston skirt-to-surface modified cylinder liner in high performance engines

    Energy Technology Data Exchange (ETDEWEB)

    Balakrishnan, S.; Rahnejat, H. [Loughborough University (United Kingdom). Wolfson School of Mechanical and Manufacturing Engineering; Howell-Smith, S. [Perfect Bore Motorsport Ltd., Andover (United Kingdom)

    2005-11-15

    The article presents detailed analysis of the conforming contact between a piston and cylinder liner in a high-speed racing engine under extreme operating conditions owing to high loads and operating speeds in excess of 19 000 r/min, resulting in a high sliding velocity of 42 m/s. The analysis indicates contact forces generated in the order of 2.5 kN. The contribution due to fluid film lubrication is found to reside in iso-viscous rigid or elastic regimes of lubrication, which is insufficient to form a coherent lubricant film during some parts of the cycle, such as at top-dead-centre (TDC). The article shows that at combustion, 95 per cent of the contact can remain in boundary or mixed regimes of lubrication. Piston skirt surface modification features are used in conjunction with an electrolytically applied composite coating, Ni[SiC]p to produce advanced cylinder liners to remedy the situation. Detailed numerical analysis shows that significant improvement is achieved in the regime of lubrication condition. (author)

  9. The investigation of stress in freestanding GaN crystals grown from Si substrates by HVPE.

    Science.gov (United States)

    Lee, Moonsang; Mikulik, Dmitry; Yang, Mino; Park, Sungsoo

    2017-08-17

    We investigate the stress evolution of 400 µm-thick freestanding GaN crystals grown from Si substrates by hydride vapour phase epitaxy (HVPE) and the in situ removal of Si substrates. The stress generated in growing GaN can be tuned by varying the thickness of the MOCVD AlGaN/AlN buffer layers. Micro Raman analysis shows the presence of slight tensile stress in the freestanding GaN crystals and no stress accumulation in HVPE GaN layers during the growth. Additionally, it is demonstrated that the residual tensile stress in HVPE GaN is caused only by elastic stress arising from the crystal quality difference between Ga- and N-face GaN. TEM analysis revealed that the dislocations in freestanding GaN crystals have high inclination angles that are attributed to the stress relaxation of the crystals. We believe that the understanding and characterization on the structural properties of the freestanding GaN crystals will help us to use these crystals for high-performance opto-electronic devices.

  10. Influence of thermal stress on the relative permittivity of the AlGaN barrier layer in an AlGaN/GaN heterostructure Schottky contacts

    International Nuclear Information System (INIS)

    Lü Yuan-Jie; Lin Zhao-Jun; Zhang Yu; Meng Ling-Guo; Cao Zhi-Fang; Luan Chong-Biao; Chen Hong; Wang Zhan-Guo

    2011-01-01

    Ni Schottky contacts on AlGaN/GaN heterostructures were fabricated. Some samples were thermally treated in a furnace with N 2 ambience at 600 °C for different times (0.5 h, 4.5 h, 10.5 h, 18 h, 33 h, 48 h, and 72 h), the others were thermally treated for 0.5 h at different temperatures (500 °C, 600 °C, 700 °C, and 800 °C). With the measured current—voltage (I—V) and capacitance—voltage (C—V) curves and by self-consistently solving Schrodinger's and Poisson's equations, we found that the relative permittivity of the AlGaN barrier layer was related to the piezoelectric and the spontaneous polarization of the AlGaN barrier layer. The relative permittivity was in proportion to the strain of the AlGaN barrier layer. The relative permittivity and the strain reduced with the increased thermal stress time until the AlGaN barrier totally relaxed (after 18 h at 600 °C in the current study), and then the relative permittivity was almost a constant with the increased thermal stress time. When the sample was treated at 800 °C for 0.5 h, the relative permittivity was less than the constant due to the huge diffusion of the contact metal atoms. Considering the relation between the relative permittivity of the AlGaN barrier layer and the converse piezoelectric effect, the conclusion can be made that a moderate thermal stress can restrain the converse piezoelectric effect and can improve the stability of AlGaN/GaN heterostructure devices. (condensed matter: electronic structure, electrical, magnetic, and optical properties)

  11. Learning about Student Research Practices through an Ethnographic Investigation: Insights into Contact with Librarians and Use of Library Space

    Directory of Open Access Journals (Sweden)

    Eamon Tewell

    2017-12-01

    Full Text Available Abstract Objective – Student research habits and expectations continue to change, complicating the design of library spaces and the provision of research support. This study’s intent was to explore undergraduate and graduate student research and study needs at a mid-sized university’s two campuses in the Northeastern United States, and to improve librarians’ understandings of these practices so that more appropriate services and spaces may be developed to support student learning. Methods – The research project utilized a primarily qualitative design for data collection that spanned from fall 2012 to summer 2013, consisting of an online questionnaire, unobtrusive observations, and in-depth semi-structured interviews. Data collection commenced with a questionnaire consisting of 51 items, distributed through campus email to all students and receiving 1182 responses. Second, 32 hours of unobtrusive observations were carried out by librarians, who took ethnographic “field notes” in a variety of Library locations during different times and days of the week. The final method was in-depth interviews conducted with 30 undergraduate and graduate students. The qualitative data were analyzed through the application of a codebook consisting of 459 codes, developed by a data analysis team of 4 librarians. Results – The results address topical areas of student interactions with librarians, contact preferences, and use of library space. Of the interviewees, 60% contacted a librarian at least once, with texting being the most popular method of contact (27%. In being contacted by the library, students preferred a range of methods and generally indicated interest in learning about library news and events through posters and signage. Participants were less interested in receiving library contact via social media, such as Facebook or Twitter. Regarding student use of and preference for library space, prominent themes were students creating their own

  12. Literature survey: Relations between stress change, deformation and transmissivity for fractures and deformation zones based on in situ investigations

    Energy Technology Data Exchange (ETDEWEB)

    Fransson, Aasa (Chalmers Univ. of Technology, Goeteborg (Sweden))

    2009-02-15

    This literature survey is focused upon relations between stress change, deformation and transmissivity for fractures and deformation zones and aims at compiling and commenting on relevant information and references with focus on data from in situ investigations. Main issues to investigate are: - Impact of normal stress change and deformation on transmissivity, for fractures and deformation zones. - Impact of shear stress and displacement on transmissivity, for fractures and deformation zones for different normal load conditions. Considering the line of research within the area, the following steps in the development can be identified. During the 1970's and 1980's, the fundamentals of rock joint deformation were investigated and identification and description of mechanisms were made in the laboratory. In the 1990's, coupling of stress-flow properties of rock joints were made using hydraulic testing to identify and describe the mechanisms in the field. Both individual fractures and deformation zones were of interest. In situ investigations have also been the topic of interest the last ten years. Further identification and description of mechanisms in the field have been made including investigation and description of system of fractures, different types of fractures (interlocked/mated or mismatched/unmated) and how this is coupled to the hydromechanical behavior. In this report, data from in situ investigations are compiled and the parameters considered to be important to link fracture deformation and transmissivity are normal stiffness, k{sub n} and hydraulic aperture, b{sub h}. All data except for those from one site originate from investigations performed in granitic rock. Normal stiffness, k{sub n}, and hydraulic aperture, b{sub h}, are correlated, even though data are scattered. In general, the largest variation is seen for small hydraulic apertures and high normal stiffness. The increasing number of contact points (areas) and fracture filling are

  13. Investigation of index finger triggering force using a cadaver experiment: Effects of trigger grip span, contact location, and internal tendon force.

    Science.gov (United States)

    Chang, Joonho; Freivalds, Andris; Sharkey, Neil A; Kong, Yong-Ku; Mike Kim, H; Sung, Kiseok; Kim, Dae-Min; Jung, Kihyo

    2017-11-01

    A cadaver study was conducted to investigate the effects of triggering conditions (trigger grip span, contact location, and internal tendon force) on index finger triggering force and the force efficiency of involved tendons. Eight right human cadaveric hands were employed, and a motion simulator was built to secure and control the specimens. Index finger triggering forces were investigated as a function of different internal tendon forces (flexor digitorum profundus + flexor digitorum superficialis = 40, 70, and 100 N), trigger grip spans (40, 50, and 60 mm), and contact locations between the index finger and a trigger. Triggering forces significantly increased when internal tendon forces increased from 40 to 100 N. Also, trigger grip spans and contact locations had significant effects on triggering forces; maximum triggering forces were found at a 50 mm span and the most proximal contact location. The results revealed that only 10-30% of internal tendon forces were converted to their external triggering forces. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. New Cosmetic Contact Allergens

    Directory of Open Access Journals (Sweden)

    An Goossens

    2015-02-01

    Full Text Available Allergic and photo-allergic contact dermatitis, and immunologic contact urticaria are potential immune-mediated adverse effects from cosmetics. Fragrance components and preservatives are certainly the most frequently observed allergens; however, all ingredients must be considered when investigating for contact allergy.

  15. Colors and contact dermatitis.

    Science.gov (United States)

    Bonamonte, Domenico; Foti, Caterina; Romita, Paolo; Vestita, Michelangelo; Angelini, Gianni

    2014-01-01

    The diagnosis of skin diseases relies on several clinical signs, among which color is of paramount importance. In this review, we consider certain clinical presentations of both eczematous and noneczematous contact dermatitis in which color plays a peculiar role orientating toward the right diagnosis. The conditions that will be discussed include specific clinical-morphologic subtypes of eczematous contact dermatitis, primary melanocytic, and nonmelanocytic contact hyperchromia, black dermographism, contact chemical leukoderma, and others. Based on the physical, chemical, and biologic factors underlying a healthy skin color, the various skin shades drawing a disease picture are thoroughly debated, stressing their etiopathogenic origins and histopathologic aspects.

  16. Simplified Semianalytical Approach for Investigation of Natural Vibrations of Elastic Bodies of Revolution in Contact with Quiescent Fluid

    Czech Academy of Sciences Publication Activity Database

    Mazúch, T.; Horáček, Jaromír; Veselý, Jan; Trnka, Jan

    2006-01-01

    Roč. 54, č. 1 (2006), s. 1-9 ISSN 1335-8863 R&D Projects: GA AV ČR(CZ) IAA200760613 Institutional research plan: CEZ:AV0Z20760514 Keywords : rotary fluid-filled vessel * 3D stress state * reduced eigenvalue problem Subject RIV: BI - Acoustics

  17. Investigation of isochronous stress-strain formulations for elevated temperature structural design

    International Nuclear Information System (INIS)

    Koo, Gyeong Hoi; Kim, Jong Bum

    2012-01-01

    For elevated temperature design evaluations by the ASME-NH rules, the most important material data is the isochronous stress-strain curves, which can provide design creep information. The main purpose of this paper is to investigate appropriate formulations to be able to generate the isochronous stress-strain curves and implement it to the computer program which is coded the ASME-NH design evaluation procedures. To do this, formulations by the strain-time relationship are investigated in detail and the sensitivity studies for rapid initial transient creep contributions, slower and longer transient creep contribution, and secondary creep contributions are carried out for type 316 austenitic stainless steel. From the results of this study, it is found that the strain-time relationship formulations can well describe the isochronous stress-strain curves with the transient creep contributions

  18. Investigation of Stress-Strain-Time Relationships of Concrete Filled Steel Tube Columns

    Directory of Open Access Journals (Sweden)

    Mutlu Seçer

    2010-01-01

    Full Text Available In this study, time dependent creep and shrinkage behaviors of concrete filled steel box section columns are investigated by using various methods. Time dependent behavior is examined by using effective modulus method, age-adjusted effective modulus method, creep rate method and Dischinger method. Shrinkage and creep strains are modeled using ACI 209 specification. In the study, in order to investigate time dependent behavior numerically, a concrete filled steel box section column is selected in a twenty story building and the time dependent stress decrease in concrete and stress increase in steel box section and the changes in strain components are calculated. Stress – time, strain – time and strain components – time graphics are shown and the advantages and the disadvantages of the numerical methods in modeling the time dependent behavior are revealed respectively.

  19. Numerical Investigation on the Performance of an Automotive Thermoelectric Generator with Exhaust-Module-Coolant Direct Contact

    Science.gov (United States)

    Wang, Yiping; Tang, Yulin; Deng, Yadong; Su, Chuqi

    2018-06-01

    Energy conservation and environmental protection have typically been a concern of research. Researchers have confirmed that in automotive engines, just 12-25% of the fuel energy converts into effective work and 30-40% gets wasted in the form of exhaust. Saidur et al. (Energy Policy 37:3650, 2009) and Hasanuzzaman et al. (Energy 36:233, 2011). It will be significant to enhance fuel availability and decrease environmental pollution if the waste heat in the exhaust could be recovered. Thermoelectric generators (TEGs), which can translate heat into electricity, have become a topic of interest for vehicle exhaust waste heat recovery. In conventional automotive TEGs, the thermoelectric modules (TEMs) are arranged between the exhaust tank and the coolant tank. The TEMs do not contact the hot exhaust and coolant, which leads to low heat transfer efficiency. Moreover, to provide enough packing force to keep good contact with the exhaust tank and the coolant tank, the framework required is so robust that the TEGs become too heavy. Therefore, in current study, an automotive TEG was designed which included one exhaust channel, one coolant channel and several TEMs. In the TEG, the TEMs which contacted the exhaust and coolant directly were inserted into the walls of each coolant channel. To evaluate the performance of the automotive TEG, the flow field and temperature field were computed by computational fluid dynamics (CFD). Based on the temperature distribution obtained by CFD and the performance parameters of the modules, the total power generation was obtained by some proved empirical formulas. Compared with conventional automotive TEGs, the power generation per unit volume exhaust was boosted.

  20. Numerical Investigation on the Performance of an Automotive Thermoelectric Generator with Exhaust-Module-Coolant Direct Contact

    Science.gov (United States)

    Wang, Yiping; Tang, Yulin; Deng, Yadong; Su, Chuqi

    2017-12-01

    Energy conservation and environmental protection have typically been a concern of research. Researchers have confirmed that in automotive engines, just 12-25% of the fuel energy converts into effective work and 30-40% gets wasted in the form of exhaust. Saidur et al. (Energy Policy 37:3650, 2009) and Hasanuzzaman et al. (Energy 36:233, 2011). It will be significant to enhance fuel availability and decrease environmental pollution if the waste heat in the exhaust could be recovered. Thermoelectric generators (TEGs), which can translate heat into electricity, have become a topic of interest for vehicle exhaust waste heat recovery. In conventional automotive TEGs, the thermoelectric modules (TEMs) are arranged between the exhaust tank and the coolant tank. The TEMs do not contact the hot exhaust and coolant, which leads to low heat transfer efficiency. Moreover, to provide enough packing force to keep good contact with the exhaust tank and the coolant tank, the framework required is so robust that the TEGs become too heavy. Therefore, in current study, an automotive TEG was designed which included one exhaust channel, one coolant channel and several TEMs. In the TEG, the TEMs which contacted the exhaust and coolant directly were inserted into the walls of each coolant channel. To evaluate the performance of the automotive TEG, the flow field and temperature field were computed by computational fluid dynamics (CFD). Based on the temperature distribution obtained by CFD and the performance parameters of the modules, the total power generation was obtained by some proved empirical formulas. Compared with conventional automotive TEGs, the power generation per unit volume exhaust was boosted.

  1. PTR-MS as a technique for investigating stress induced emission of biogenic VOCS

    International Nuclear Information System (INIS)

    Beauchamp, J.; Hansel, A.; Wisthaler, A.; Kleist, E.; Miebach, M.; Weller, U.; Wildt, J.

    2004-01-01

    Proton-transfer-reaction mass spectrometry (PTR-MS) was used in conjunction with two GC-MS systems to investigate stress induced emissions of volatile organic compounds (VOCs) from plants. Experiments were performed in the laboratory under well defined conditions and VOC emissions were induced by ozone exposure at variable concentrations and for different durations. Tobacco (Nicotiana tabaccum cv. Bel W3) plants were used as the investigated species. This investigation demonstrated the ability of PTR-MS to provide excellent high time-resolution on-line measurements of the relevant species. The combination of the PTR-MS instrument with the two GC-MS systems (which enabled accurate compound identification) allowed for detailed investigation of the dynamics of the plants' responses to ozone stress. VOCs measured included methanol, C6- alcohols and aldehydes, methyl salicylate and sesquiterpenes. Results indicate that the temporal stress response of plants depend on the amount of stress encountered by the plant. Measurement technique and experimental results will be presented. (author)

  2. DSM-5 AND ICD-11 DEFINITIONS OF POSTTRAUMATIC STRESS DISORDER : INVESTIGATING "NARROW" AND "BROAD" APPROACHES

    NARCIS (Netherlands)

    Stein, Dan J.; McLaughlin, Katie A.; Koenen, Karestan C.; Atwoli, Lukoye; Friedman, Matthew J.; Hill, Eric D.; Maercker, Andreas; Petukhova, Maria; Shahly, Victoria; van Ommeren, Mark; Alonso, Jordi; Borges, Guilherme; de Girolamo, Giovanni; de Jonge, Peter; Demyttenaere, Koen; Florescu, Silvia; Karam, Elie G.; Kawakami, Norito; Matschinger, Herbert; Okoliyski, Michail; Posada-Villa, Jose; Scott, Kate M.; Viana, Maria Carmen; Kessler, Ronald C.

    Background: The development of the Diagnostic and Statistical Manual of Mental Disorders 5th edition (DSM-5) and ICD-11 has led to reconsideration of diagnostic criteria for posttraumatic stress disorder (PTSD). The World Mental Health (WMH) Surveys allow investigation of the implications of the

  3. Investigating the effect of job stress and emotional intelligence on job performance

    Directory of Open Access Journals (Sweden)

    Mojtaba Rafiee

    2013-09-01

    Full Text Available Researchers and scholars of management and behavioral sciences have tried to determine effective factors, which influence on efficiency and effectiveness in order to increase organization performance and they have tried to identify factors, which create job stress. In this research, we investigate the effect of job stress on job performance through emotional, organizational and moral intelligence. The study is a descriptive-analytic one, which is based on correlation, uses survey method to gather data and they are analyzed using structural equation modeling. The population of this research includes all the personnel of Registry Organization in Arak city. The results suggest that job stress influences on job performance through organizational intelligence and moral intelligence, but job stress does not influence on job performance through emotional intelligence. Regarding research hypotheses, results and findings after analyzing obtained data suggest that job stress influences on emotional, organizational and moral intelligence, but job stress does not influence on job performance. In addition, the results show that organizational and moral intelligence influence on job performance but emotional intelligence does not influence on job performance.

  4. Investigation of residual stress in laser welding between carbon steel AISI 1010 and stainless AISI 304

    International Nuclear Information System (INIS)

    Mirim, Denilson de Camargo

    2011-01-01

    The dissimilar materials union has the residual stress formation as one of the most critical problems, which occurs mainly because these materials have both different thermal expansion coefficients and thermal conductivities. In this study, it was investigated the laser welding technique between steels, AISI 1010 and AISI 304. The materials were joined by butt autogenous welding with a continuous Nd:YAG laser. The main objective was to identify the welding parameters influence by the residual stresses analysis in the heat affected zone (HAZ). It was executed a factorial design with three-factor at two levels with a replica, which were varied power, welding speed and focal position of the laser beam. Residual stress measurements by the diffraction of X-rays were performed on the sample surface, to study their variation as a function of the parameters investigated. The blind hole method was also used to evaluate the residual stress along the samples depth, up to depth of 1mm. Besides residual stress measurement, weld seams were evaluated by optical and scanned electron microscopy, which were aimed to determine the weld geometry and changes in the microstructure. It was also made Vickers hardness measurements to evaluate the extent of HAZ. To evaluate the mechanical properties of the union were performed tensile and fatigue test. The MINITAB 15 software was used to analyze the residual stresses obtained by the blind hole method at different depths of the HAZ. It was also used statistical regression based on both the influences different and the combination of this input factors, in the residual stress of union. The results indicate that the models can satisfactorily predict the responses and provide users a guide to better define the welding parameters. (author)

  5. Investigating the effects of stress on the pore structures of nuclear grade graphites

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, Joshua E.L., E-mail: joshua.taylor@postgrad.manchester.ac.uk; Hall, Graham N., E-mail: graham.n.hall@manchester.ac.uk; Mummery, Paul M., E-mail: paul.m.mummery@manchester.ac.uk

    2016-03-15

    Graphite is used as a moderating material and as a structural component in a number of current generation nuclear reactors. During reactor operation stresses develop in the graphite components, causing them to deform. It is important to understand how the microstructure of graphite affects the material's response to these stresses. A series of experiments were performed to investigate how the pore structures of Pile Grade A and Gilsocarbon graphites respond to loading stresses. A compression rig was used to simulate the build-up of operational stresses in graphite components, and a confocal laser microscope was used to study variation of a number of important pore properties. Values of elastic modulus and Poisson's ratio were calculated and compared to existing literature to confirm the validity of the experimental techniques. Mean pore areas were observed to decrease linearly with increasing applied load, mean pore eccentricity increased linearly, and a small amount of clockwise pore rotation was observed. The response to build-up of stresses was dependent on the orientation of the pores and basal planes and the shapes of the pores with respect to the loading axis. It was proposed that pore closure and pore reorientation were competing processes. Pore separation was quantified using ‘nearest neighbour’ and Voronoi techniques, and non-pore regions were found to shrink linearly with increasing applied load. - Highlights: • Effects of stress on pore structures of Gilsocarbon and PGA graphites were studied. • Application of a compressive load was used to generate stresses in graphite. • Inverse linear relationship between stress and pore area was observed. • Mean pore eccentricity increased, clockwise pore rotation observed. • Separation of pores quantified using Voronoi and ‘nearest-neighbour’ methods.

  6. Geophysical Properties of Hard Rock for Investigation of Stress Fields in Deep Mines

    Science.gov (United States)

    Tibbo, M.; Young, R. P.; Schmitt, D. R.; Milkereit, B.

    2014-12-01

    A complication in geophysical monitoring of deep mines is the high-stress dependency of the physical properties of hard rocks. In-mine observations show anisotropic variability of the in situ P- and S-wave velocities and resistivity of the hard rocks that are likely related to stress field changes. As part of a comprehensive study in a deep, highly stressed mine located in Sudbury, Ontario, Canada, data from in situ monitoring of the seismicity, conductivity, stress, and stress dependent physical properties has been obtain. In-laboratory experiments are also being performed on borehole cores from the Sudbury mines. These experiments will measure the Norite borehole core's properties including elastic modulus, bulk modulus, P- and S-wave velocities, and density. Hydraulic fracturing has been successfully implemented in industries such as oil and gas and enhanced geothermal systems, and is currently being investigated as a potential method for preconditioning in mining. However, further research is required to quantify how hydraulic fractures propagate through hard, unfractured rock as well as naturally fractured rock typically found in mines. These in laboratory experiments will contribute to a hydraulic fracturing project evaluating the feasibility and effectiveness of hydraulic fracturing as a method of de-stressing hard rock mines. A tri-axial deformation cell equipped with 18 Acoustic Emission (AE) sensors will be used to bring the borehole cores to a tri-axial state of stress. The cores will then be injected with fluid until the the hydraulic fracture has propagated to the edge of the core, while AE waveforms will be digitized continuously at 10 MHz and 12-bit resolution for the duration of each experiment. These laboratory hydraulic fracture experiments will contribute to understanding how parameters including stress ratio, fluid injection rate, and viscosity, affect the fracturing process.

  7. Investigations on the influence of the stress state on fracture-mechanical values

    International Nuclear Information System (INIS)

    Schmidt, P.

    1979-01-01

    Fracture toughness obtained from specimen can be applied to construction elements only when the same stress state exists. In standardised fracture-mechanical tests plain strain is realised. Using the stress intensity factor, a critical crack length or a critical load can be obtained. Above these values a crack propagates in an unstable way. The specimen are tested under uni-axial load. In this paper investigations have been made whether a biaxial load increases the stress state over the plain strain and whether consequently a decrease of the critical fracture toughness and a shift of the temperatures Tsub(g)sub(y) and Tsub(s) results which characterise the fracture behaviour of steel. In order to answer these questions the tests were made which induced due to their geometry an additional nominal stress parallel to the crack front in spite of uni-axial loading. The results were compared with those from specimen without an additional nominal stress and having in their cross section under same test conditions nearly the same plain strain. The fracture toughness of both specimen types were compared at temperatures between 142 K and 252 K and correlated to other material-characterising values. The tests were completed by stress analysis and by comparing the crack opening displacement. Due to the additional stress, Tsub(g)sub(y) was found to be 20 K higher than for the reference specimen. The fracture toughness decreases significantly in certain temperature ranges. The plastic stress concentration factor was comperatively higher and the remaining plastic crack opening decreases up to 25%. (orig.) [de

  8. First-principles investigation on the electronic efficiency and binding energy of the contacts formed by graphene and poly-aromatic hydrocarbon anchoring groups

    Energy Technology Data Exchange (ETDEWEB)

    Li, Yang; Tu, Xingchen; Wang, Hao; Hou, Shimin, E-mail: smhou@pku.edu.cn [Centre for Nanoscale Science and Technology, Key Laboratory for the Physics and Chemistry of Nanodevices, Department of Electronics, Peking University, Beijing 100871 (China); Sanvito, Stefano [School of Physics, AMBER and CRANN Institute, Trinity College, Dublin 2 (Ireland)

    2015-04-28

    The electronic efficiency and binding energy of contacts formed between graphene electrodes and poly-aromatic hydrocarbon (PAH) anchoring groups have been investigated by the non-equilibrium Green’s function formalism combined with density functional theory. Our calculations show that PAH molecules always bind in the interior and at the edge of graphene in the AB stacking manner, and that the binding energy increases following the increase of the number of carbon and hydrogen atoms constituting the PAH molecule. When we move to analyzing the electronic transport properties of molecular junctions with a six-carbon alkyne chain as the central molecule, the electronic efficiency of the graphene-PAH contacts is found to depend on the energy gap between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) of the corresponding PAH anchoring group, rather than its size. To be specific, the smaller is the HOMO-LUMO gap of the PAH anchoring group, the higher is the electronic efficiency of the graphene-PAH contact. Although the HOMO-LUMO gap of a PAH molecule depends on its specific configuration, PAH molecules with similar atomic structures show a decreasing trend for their HOMO-LUMO gap as the number of fused benzene rings increases. Therefore, graphene-conjugated molecule-graphene junctions with high-binding and high-conducting graphene-PAH contacts can be realized by choosing appropriate PAH anchor groups with a large area and a small HOMO-LUMO gap.

  9. First-principles investigation on the electronic efficiency and binding energy of the contacts formed by graphene and poly-aromatic hydrocarbon anchoring groups

    KAUST Repository

    Li, Yang; Tu, Xingchen; Wang, Hao; Sanvito, Stefano; Hou, Shimin

    2015-01-01

    © 2015 AIP Publishing LLC. The electronic efficiency and binding energy of contacts formed between graphene electrodes and poly-aromatic hydrocarbon (PAH) anchoring groups have been investigated by the non-equilibrium Green's function formalism combined with density functional theory. Our calculations show that PAH molecules always bind in the interior and at the edge of graphene in the AB stacking manner, and that the binding energy increases following the increase of the number of carbon and hydrogen atoms constituting the PAH molecule. When we move to analyzing the electronic transport properties of molecular junctions with a six-carbon alkyne chain as the central molecule, the electronic efficiency of the graphene-PAH contacts is found to depend on the energy gap between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) of the corresponding PAH anchoring group, rather than its size. To be specific, the smaller is the HOMO-LUMO gap of the PAH anchoring group, the higher is the electronic efficiency of the graphene-PAH contact. Although the HOMO-LUMO gap of a PAH molecule depends on its specific configuration, PAH molecules with similar atomic structures show a decreasing trend for their HOMO-LUMO gap as the number of fused benzene rings increases. Therefore, graphene-conjugated molecule-graphene junctions with high-binding and high-conducting graphene-PAH contacts can be realized by choosing appropriate PAH anchor groups with a large area and a small HOMO-LUMO gap.

  10. Steady sliding frictional contact problem for a 2d elastic half-space with a discontinuous friction coefficient and related stress singularities

    Science.gov (United States)

    Ballard, Patrick

    2016-12-01

    The steady sliding frictional contact problem between a moving rigid indentor of arbitrary shape and an isotropic homogeneous elastic half-space in plane strain is extensively analysed. The case where the friction coefficient is a step function (with respect to the space variable), that is, where there are jumps in the friction coefficient, is considered. The problem is put under the form of a variational inequality which is proved to always have a solution which, in addition, is unique in some cases. The solutions exhibit different kinds of universal singularities that are explicitly given. In particular, it is shown that the nature of the universal stress singularity at a jump of the friction coefficient is different depending on the sign of the jump.

  11. Design changes of device to investigation of alloys linear contraction and shrinkage stresses

    Directory of Open Access Journals (Sweden)

    J. Mutwil

    2009-07-01

    Full Text Available Some design changes in device elaborated by author to examination of linear contraction and shrinkage stresses progress of metals and alloys during– and after solidification have been described. The introduced changes have been focused on design of closing of shrinkage test rod mould. The introduced changes have been allowed to simplify a mounting procedure of thermocouples measuring a temperature of the shrinkage rod casting (in 6 points. Exemplary investigation results of linear contraction and shrinkage stresses development in Al-Si13.5% alloy have been presented.

  12. MEMS-based contact stress field measurements at a rough elastomeric layer: local test of Amontons’ friction law in static and steady sliding regimes

    Directory of Open Access Journals (Sweden)

    Debrégeas G.

    2010-06-01

    Full Text Available We present the results of recent friction experiments in which a MEMS-based sensing device is used to measure both the normal and tangential stress fields at the base of a rough elastomer film in frictional contact with smooth, rigid, glass indentors. We consider successively multicontacts under (i static normal loading by a spherical indentor and (ii frictional steady sliding conditions against a cylindrical indentor, for an increasing normal load. In both cases, the measured fields are compared to elastic calculations assuming (i a smooth interface and (ii Amontons’ friction law. In the static case, significant deviations are observed which decrease with increasing load and which vanish when a lubricant is used. In the steady sliding case, Amontons’ law reproduces rather satisfactorily the experiments provided that the normal/tangential coupling at the contact interface is taken into account. We discuss the origin of the difference between the Amontons fields and the measured ones, in particular the effect of the finite normal and tangential compliances of the multicontact interface.

  13. Environmental Stress Responses and Biological Interactions Investigated in the Drosophila Model System

    DEFF Research Database (Denmark)

    Ørsted, Michael

    on their ability to respond on a behavioral, physiological, morphological and/or evolutionary level according to the environmental cues. At the same time, if populations are small and fragmented, and have limited gene flow, environmental change and environmental stress might interact with intrinsic genetic stress...... such as inbreeding and genetic drift, which can exacerbate the effects of one or more environmental stresses. Furthermore, inbred populations often have low genetic variation that might constrain evolutionary responses to rapidly changing environments. This thesis investigates how, and to what extent, insect model......When organisms are faced with changes in their environment, they are forced to respond, if they are to maintain optimal function. Especially ectotherms must deal with environmental changes in e.g. temperature on a regular basis, and thus their survival and reproductive success depend...

  14. Investigations of Residual Stresses and Mechanical Properties of Single Crystal Niobium for SRF Cavities

    Science.gov (United States)

    Gnäupel-Herold, Thomas; Myneni, Ganapati Rao; Ricker, Richard E.

    2007-08-01

    This work investigates properties of large grained, high purity niobium with respect to the forming of superconducting radio frequency (SRF) cavities from such large grained sheets. The yield stresses were examined using tensile specimens that were essentially single crystals in orientations evenly distributed in the standard projection triangle. No distinct yield anisotropy was found, however, vacuum annealing increased the yield strength by a factor 2…3. The deep drawing forming operation of the half cells raises the issues of elastic shape changes after the release of the forming tool (springback) and residual stresses, both of which are indicated to be negligible. This is a consequence of the low yield stress (sheet metal forming). However, the significant anisotropy of the transversal plastic strains after uniaxial deformation points to potentially critical thickness variations for large grained / single crystal half cells, thus raising the issue of controlling grain orientation or using single crystal sheet material.

  15. TEM/SEM investigation of microstructural changes within the white etching area under rolling contact fatigue and 3-D crack reconstruction by focused ion beam

    International Nuclear Information System (INIS)

    Grabulov, A.; Ziese, U.; Zandbergen, H.W.

    2007-01-01

    The white etching area (WEA) surrounding the cracks formed under high-cycle rolling contact fatigue was investigated by transmission electron microscopy (TEM) and Dual Beam (scanning electron microscopy (SEM)/focused ion beam). SEM revealed the initiation of cracks formed around artificially introduced Al 2 O 3 inclusions in the model steel (composition similar to SAE 52100). TEM investigations showed a microstructural difference between the WEA (formation of nanocrystalline ferrite) and the steel matrix (tempered martensitic structure). A three-dimensional image of the crack reconstructed from ∼400 Dual Beam cross-section images is reported

  16. Investigation of thermoelastic stresses induced at high altitudes on aircraft external fuel tanks

    Science.gov (United States)

    Mousseau, Stephanie Lynn Steber

    As composite technology has grown over the past several decades, the use of composite materials in military applications has become more feasible and widely accepted. Although composite materials provide many benefits, including strength optimization and reduced weight, damage and repair of these materials creates an additional challenge, especially when operating in a marine environment, such as on a carrier deck. This is evident within the Navy, as excessive damage often leads to the scrapping of F/A-18 External Fuel Tanks. This damage comes in many forms, the most elusive of which is delamination. Often the delamination found on the tanks is beyond repairable limits and the cause unknown, making it difficult to predict and prevent. The purpose of this investigation was to study the structure of the Navy's 330 gallon External Fuel Tanks and investigate one potential cause of delamination, stresses induced at high altitudes by cold temperatures. A stress analysis was completed using finite element software, and validation of the model was accomplished through testing of a scale model specimen. Due to the difficulties in modeling and predicting delamination, such as unknown presence of voids and understanding failure criteria, delamination was not modeled in Abaqus, rather stresses were observed and characteristics were studied to understand the potential for delamination within the layup. In addition, studies were performed to understand the effect of material properties and layup sequence on the stress distribution within the tank. Alternative design solutions are presented which could reduce the radial stresses within the tank, and recommendations are made for further study to understand the trade-offs between stress, cost, and manufacturability.

  17. Stress

    Science.gov (United States)

    ... can be life-saving. But chronic stress can cause both physical and mental harm. There are at least three different types of stress: Routine stress related to the pressures of work, family, and other daily responsibilities Stress brought about ...

  18. [Two scales for job stress and psychological health investigation: type-A personality and job satisfaction].

    Science.gov (United States)

    Batigün, Ayşegül Durak; Sahin, Nesrin H

    2006-01-01

    The purpose of the present study is to investigate the psychometric properties of two instruments developed to measure Type-A behaviors and job satisfaction, two important variables mentioned in the stress literature. The data were collected from two different samples, one composed of 426 bank personnel, the other composed of 94 adults working in a private company. The findings are presented separately under the titles Study I and Study II. In both of the studies the assessment instruments used were: Stress Audit (Symptoms), Stress Audit (Vulnerability), Stress Coping Behaviors, Job Satisfaction Scale, and Type-A Behaviors Inventory. For both of the instruments, the studies were based on factor analyses. For Type-A Behaviors Inventory the analyses revealed 4 factors, while for Job Satisfaction Scale they revealed 6 factors. The factor subscales developed from these factors were found to have satisfactory Cronbach's alphas. For Type-A Behaviors Inventory they ranged between .40 and .90; whereas for Job Satisfaction Inventory these values were between .53 and .94. Both studies also included correlational analyses to specify the criterion validity values of the two instruments. The findings revealed that both of the instruments had satisfactory psychometric values, indicating that they can be reliably used in health psychology and job stress studies.

  19. Effects of emotional and perceptual-motor stress on a voice recognition system's accuracy: An applied investigation

    Science.gov (United States)

    Poock, G. K.; Martin, B. J.

    1984-02-01

    This was an applied investigation examining the ability of a speech recognition system to recognize speakers' inputs when the speakers were under different stress levels. Subjects were asked to speak to a voice recognition system under three conditions: (1) normal office environment, (2) emotional stress, and (3) perceptual-motor stress. Results indicate a definite relationship between voice recognition system performance and the type of low stress reference patterns used to achieve recognition.

  20. Contact Line Dynamics

    Science.gov (United States)

    Kreiss, Gunilla; Holmgren, Hanna; Kronbichler, Martin; Ge, Anthony; Brant, Luca

    2017-11-01

    The conventional no-slip boundary condition leads to a non-integrable stress singularity at a moving contact line. This makes numerical simulations of two-phase flow challenging, especially when capillarity of the contact point is essential for the dynamics of the flow. We will describe a modeling methodology, which is suitable for numerical simulations, and present results from numerical computations. The methodology is based on combining a relation between the apparent contact angle and the contact line velocity, with the similarity solution for Stokes flow at a planar interface. The relation between angle and velocity can be determined by theoretical arguments, or from simulations using a more detailed model. In our approach we have used results from phase field simulations in a small domain, but using a molecular dynamics model should also be possible. In both cases more physics is included and the stress singularity is removed.

  1. Surface layer investigation of duplex stainless steel S32205 after stress peening utilizing X-ray diffraction

    International Nuclear Information System (INIS)

    Feng, Qiang; Jiang, Chuanhai; Xu, Zhou

    2013-01-01

    Highlights: ► The stress shot peening is superior to the conventional shot peening. ► Residual stresses along the loaded direction are bigger than transverse direction. ► Higher prestress leads to smaller domain size, high density of dislocation. ► Compared to ferrite, austenite has much higher hardness and work hardening. ► Ferrite has higher recover of elastic deformation than austenite after unloading. - Abstract: Residual stresses and micro-hardness of duplex stainless steel S32205 after stress peening are measured and domain sizes and microstrain are calculated. The results show that stress peening can significantly improve the compressive residual stresses and micro-hardness in both austenite and ferrite, and the former is affected by both the prestress and the measurement directions. Microstructure investigation reveals that material deformation is enhanced after stress peening, and smaller domain sizes and higher microstrain are introduced. The compressive residual stress enhancement by stress peening in ferrite is more than that in austenite under the same stress peening, which is due to the more elastic deformation recover in ferrite. Therefore, the difference of residual stresses between ferrite and austenite can be narrowed down by conducting appropriate stress peening. Based on these investigations, it is concluded that stress peening is superior to conventional shot peening treatment to improve the surface properties of duplex stainless steel

  2. A Synchrotron FTIR Microspectroscopy Investigation of Fungal Hyphae Grown under Optimal and Stressed Conditions

    International Nuclear Information System (INIS)

    Szeghalmi, A.; Kaminskyj, S.; Gough, K.

    2007-01-01

    Synchrotron FTIR can provide high spatial resolution ( o C but have growth defects at 42 o C. We have also investigated Neurospora and Rhizopus cultures grown in media with optimal or elevated pH. Significant differences between the spectra of the three fungi are likely related to differences in composition and structure. In addition, high spatial resolution synchrotron FTIR spectroscopy provides an outstanding method for monitoring subtle subcellular changes that accompany environmental stress

  3. Experimental Investigation of Principal Residual Stress and Fatigue Performance for Turned Nickel-Based Superalloy Inconel 718.

    Science.gov (United States)

    Hua, Yang; Liu, Zhanqiang

    2018-05-24

    Residual stresses of turned Inconel 718 surface along its axial and circumferential directions affect the fatigue performance of machined components. However, it has not been clear that the axial and circumferential directions are the principle residual stress direction. The direction of the maximum principal residual stress is crucial for the machined component service life. The present work aims to focuses on determining the direction and magnitude of principal residual stress and investigating its influence on fatigue performance of turned Inconel 718. The turning experimental results show that the principal residual stress magnitude is much higher than surface residual stress. In addition, both the principal residual stress and surface residual stress increase significantly as the feed rate increases. The fatigue test results show that the direction of the maximum principal residual stress increased by 7.4%, while the fatigue life decreased by 39.4%. The maximum principal residual stress magnitude diminished by 17.9%, whereas the fatigue life increased by 83.6%. The maximum principal residual stress has a preponderant influence on fatigue performance as compared to the surface residual stress. The maximum principal residual stress can be considered as a prime indicator for evaluation of the residual stress influence on fatigue performance of turned Inconel 718.

  4. Experimental Investigation of Principal Residual Stress and Fatigue Performance for Turned Nickel-Based Superalloy Inconel 718

    Directory of Open Access Journals (Sweden)

    Yang Hua

    2018-05-01

    Full Text Available Residual stresses of turned Inconel 718 surface along its axial and circumferential directions affect the fatigue performance of machined components. However, it has not been clear that the axial and circumferential directions are the principle residual stress direction. The direction of the maximum principal residual stress is crucial for the machined component service life. The present work aims to focuses on determining the direction and magnitude of principal residual stress and investigating its influence on fatigue performance of turned Inconel 718. The turning experimental results show that the principal residual stress magnitude is much higher than surface residual stress. In addition, both the principal residual stress and surface residual stress increase significantly as the feed rate increases. The fatigue test results show that the direction of the maximum principal residual stress increased by 7.4%, while the fatigue life decreased by 39.4%. The maximum principal residual stress magnitude diminished by 17.9%, whereas the fatigue life increased by 83.6%. The maximum principal residual stress has a preponderant influence on fatigue performance as compared to the surface residual stress. The maximum principal residual stress can be considered as a prime indicator for evaluation of the residual stress influence on fatigue performance of turned Inconel 718.

  5. Investigation of pentacene growth on SiO2 gate insulator after photolithography for nitrogen-doped LaB6 bottom-contact electrode formation

    Science.gov (United States)

    Maeda, Yasutaka; Hiroki, Mizuha; Ohmi, Shun-ichiro

    2018-04-01

    Nitrogen-doped (N-doped) LaB6 is a candidate material for the bottom-contact electrode of n-type organic field-effect transistors (OFETs). However, the formation of a N-doped LaB6 electrode affects the surface morphology of a pentacene film. In this study, the effects of surface treatments and a N-doped LaB6 interfacial layer (IL) were investigated to improve the pentacene film quality after N-doped LaB6 electrode patterning with diluted HNO3, followed by resist stripping with acetone and methanol. It was found that the sputtering damage during N-doped LaB6 deposition on a SiO2 gate insulator degraded the crystallinity of pentacene. The H2SO4 and H2O2 (SPM) and diluted HF treatments removed the damaged layer on the SiO2 gate insulator surface. Furthermore, the N-doped LaB6 IL improved the crystallinity of pentacene and realized dendritic grain growth. Owing to these surface treatments, the hole mobility improved from 2.8 × 10-3 to 0.11 cm2/(V·s), and a steep subthreshold swing of 78 mV/dec for the OFET with top-contact configuration was realized in air even after bottom-contact electrode patterning.

  6. First-principles investigation on the electronic efficiency and binding energy of the contacts formed by graphene and poly-aromatic hydrocarbon anchoring groups

    KAUST Repository

    Li, Yang

    2015-04-28

    © 2015 AIP Publishing LLC. The electronic efficiency and binding energy of contacts formed between graphene electrodes and poly-aromatic hydrocarbon (PAH) anchoring groups have been investigated by the non-equilibrium Green\\'s function formalism combined with density functional theory. Our calculations show that PAH molecules always bind in the interior and at the edge of graphene in the AB stacking manner, and that the binding energy increases following the increase of the number of carbon and hydrogen atoms constituting the PAH molecule. When we move to analyzing the electronic transport properties of molecular junctions with a six-carbon alkyne chain as the central molecule, the electronic efficiency of the graphene-PAH contacts is found to depend on the energy gap between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) of the corresponding PAH anchoring group, rather than its size. To be specific, the smaller is the HOMO-LUMO gap of the PAH anchoring group, the higher is the electronic efficiency of the graphene-PAH contact. Although the HOMO-LUMO gap of a PAH molecule depends on its specific configuration, PAH molecules with similar atomic structures show a decreasing trend for their HOMO-LUMO gap as the number of fused benzene rings increases. Therefore, graphene-conjugated molecule-graphene junctions with high-binding and high-conducting graphene-PAH contacts can be realized by choosing appropriate PAH anchor groups with a large area and a small HOMO-LUMO gap.

  7. Forensic Interviews for Child Sexual Abuse Allegations: An Investigation into the Effects of Animal-Assisted Intervention on Stress Biomarkers.

    Science.gov (United States)

    Krause-Parello, Cheryl A; Gulick, Elsie E

    2015-01-01

    The use of therapy animals during forensic interviews for child sexual abuse allegations is a recommendation by the Therapy Animals Supporting Kids Program to help ease children's discomfort during the forensic interview process. Based on this recommendation, this study incorporated a certified therapy canine into the forensic interview process for child sexual abuse allegations. This study investigated changes in salivary cortisol, immunoglobulin A, blood pressure, and heart rate as a result of forensic interview phenomenon (e.g., outcry) incorporating animal-assisted intervention versus a control condition in children (N = 42) interviewed for alleged child sexual abuse. The results supported significantly greater heart rate values for the control group (n = 23) who experienced sexual contact and/or indecency than the experience of aggravated sexual assault compared to no difference in HR for the intervention group (n = 19). The results suggest that the presence of the canine in the forensic interview may have acted as a buffer or safeguard for the children when disclosing details of sexual abuse. In the intervention group, children's HR was lower at the start of the forensic interview compared to the control group. Finding an effect of having a certified handler-canine team available during the forensic interview on physiological measures of stress has real-world value for children, child welfare personnel, and clinical therapists. It is suggested that animal-assisted intervention be expanded to children facing other types of trauma and to treatment programs for child survivors of sexual abuse.

  8. Effects of interaction of an early experience of reward through maternal contact or its denial with social stress during adolescence on the serotonergic system and the stress responsiveness of adult female rats.

    Science.gov (United States)

    Raftogianni, A; Diamantopoulou, A; Alikaridis, F; Stamatakis, A; Stylianopoulou, F

    2012-05-03

    Experiences during critical periods, such as the neonatal and adolescence, play a critical role in determining adult stress-coping behavior. Based on the aforementioned we developed an experimental protocol, which included a neonatal experience and a social stress during adolescence. The serotonergic system is known as an important modulator of coping ability and, in general, emotional balance in both normal and pathological states, such as depression and anxiety, for which females are more vulnerable. Thus in the present work we used female rats and determined 5-HT, 5-hydroxyindoleacetic acid (5-HIAA), and 5-hydroxytryptamine receptor type 1A (5-HT(1A)) receptor levels in the prefrontal cortex (PFC) and the amygdala (AMY). During postnatal days 10-13 (PND 10-13) rat pups were exposed to a T-maze, one arm of which lead to the mother. One group of animals was allowed contact with the mother (rewarded-receiving expected reward (RER)), whereas the other was denied the expected reward (DER). High performance liquid chromatography (HPLC) analysis revealed that in both the PFC and in AMY, adult RER animals had higher basal 5-HT levels. Furthermore, in the AMY of this group of animals, higher levels of 5-HT(1A) receptors were detected by Western blot analysis. In adulthood rats were exposed to the Forced Swimming Test/Stress (FST/S). RER animals not exposed to the adolescent stress exhibited longer immobility time during both the first and second day of FST. Corticosterone levels following the FST fell faster in the DER animals. Adolescent stress affected the responses to the adult FSS only in the DER animals, which had decreased 5-HT in the AMY and increased immobility time on both days of the FST, compared with the DER, not stressed in adolescence. The phenotype of the DER animals is in line with the "match-mismatch" hypothesis, which states that if two events during critical periods of life "match" in being mildly stressful, their interaction can be adaptive. Copyright

  9. Numerical investigation on residual stress distribution and evolution during multipass narrow gap welding of thick-walled stainless steel pipes

    International Nuclear Information System (INIS)

    Liu, C.; Zhang, J.X.; Xue, C.B.

    2011-01-01

    Research highlights: → We performed pass-by-pass simulation of stresses for welding of thick-walled pipes. → The distributions and evolution of the residual stresses are demonstrated. → After the groove is filled to a height, the through-wall stress is almost unchanged. - Abstracts: The detailed pass-by-pass finite element (FE) simulation is presented to investigate the residual stresses in narrow gap multipass welding of pipes with a wall thickness of 70 mm and 73 weld passes. The simulated residual stress on the outer surface is validated with the experimental one. The distribution and evolution of the through-wall residual stresses are demonstrated. The investigated results show that the residual stresses on the outer and inner surfaces are tensile in the weld zone and its vicinity. The through-wall axial residual stresses at the weld center line and the HAZ line demonstrate a distribution of bending type. The through-wall hoop residual stress within the weld is mostly tensile. After the groove is filled to a certain height, the peak tensile stresses and the stress distribution patterns for both axial and hoop stresses remain almost unchanged.

  10. Sports Activity after Low-contact-stress Total Knee Arthroplasty – A long term follow-up study

    Science.gov (United States)

    Vielgut, Ines; Leitner, Lukas; Kastner, Norbert; Radl, Roman; Leithner, Andreas; Sadoghi, Patrick

    2016-01-01

    The purpose of this study was to provide comprehensive long-term data about sports activity levels in patients following total knee arthroplasty (TKA) and to determine the impact of pre-operative function, pain and specific performed sports on the results. 236 patients who have undergone TKA for severe osteoarthritis of the knee were asked to provide specific information regarding exercised types of sports before surgery and after at least 10 years following TKA. Pre- and postoperative function and pain were evaluated by the use of Tegner-, WOMAC- and VAS Score. After a mean of 14.9 years, a significant improvement regarding pain and function was observed. Pre-operative Tegner- and WOMAC scores revealed significant positive correlations with the post-operative Tegner-Score. Accordingly, a high percentage of patients (70.9%) stayed actively involved in sports. Nevertheless, the number of performing patients has decreased according to the sports impact. 71.3% continued practising low-impact-, 43.7% intermediate-impact sports whereas only 16.4% kept performing high impact sports. We conclude that TKA is highly effective in long-time pain reduction as well as improvement of function. Additionally, we found considerable sports activities preserved in the investigated series. However, sports activities in particular, seem to decrease according to the impact of sports. PMID:27090945

  11. Sports Activity after Low-contact-stress Total Knee Arthroplasty - A long term follow-up study.

    Science.gov (United States)

    Vielgut, Ines; Leitner, Lukas; Kastner, Norbert; Radl, Roman; Leithner, Andreas; Sadoghi, Patrick

    2016-04-19

    The purpose of this study was to provide comprehensive long-term data about sports activity levels in patients following total knee arthroplasty (TKA) and to determine the impact of pre-operative function, pain and specific performed sports on the results. 236 patients who have undergone TKA for severe osteoarthritis of the knee were asked to provide specific information regarding exercised types of sports before surgery and after at least 10 years following TKA. Pre- and postoperative function and pain were evaluated by the use of Tegner-, WOMAC- and VAS Score. After a mean of 14.9 years, a significant improvement regarding pain and function was observed. Pre-operative Tegner- and WOMAC scores revealed significant positive correlations with the post-operative Tegner-Score. Accordingly, a high percentage of patients (70.9%) stayed actively involved in sports. Nevertheless, the number of performing patients has decreased according to the sports impact. 71.3% continued practising low-impact-, 43.7% intermediate-impact sports whereas only 16.4% kept performing high impact sports. We conclude that TKA is highly effective in long-time pain reduction as well as improvement of function. Additionally, we found considerable sports activities preserved in the investigated series. However, sports activities in particular, seem to decrease according to the impact of sports.

  12. A longitudinal, mixed methods investigation of newly qualified nurses' workplace stressors and stress experiences during transition.

    Science.gov (United States)

    Halpin, Yvonne; Terry, Louise M; Curzio, Joan

    2017-11-01

    To investigate transition in newly qualified nurses through an exploration of their stressors and stress experiences during their first 12 months postqualifying. Globally, thousands of new nurses qualify annually. They are crucial for the profession and healthcare service delivery. Work-related stress has multiple serious consequences, yet there is a lack of robust, empirical evidence that directly analyses newly qualified nurses and the stress they feel and experience in the workplace. Understanding what causes newly qualified nurses' stress is vital to retaining and nurturing this vital component of the workforce. Longitudinal, explanatory sequential mixed methods, cohort study. At the point of qualification (n = 288), 6 months postqualifying (n = 107) and 12 months postqualifying (n = 86), newly qualified nurses completed the Nursing Stress Scale, with 14 completing a one-to-one interview at 12 months postqualifying. Data were collected from 2010 - 2012. Inferential statistics, "thematic analysis" and "side-by-side comparisons in a discussion" were used for analysis. Workload was consistently the highest reported stressor with inadequate staffing and managing multiple role demands given as explanations. Incivility within the workplace was a noted stressor. Conversely, being part of "a good team" provided a civil, supportive, facilitative work environment. Entering nurse education with previous healthcare experience had a mediating effect on the reported frequency of stressors. Newly qualified nurses encounter multiple work-related stressors over their first 12 months postqualifying, which are intrinsically entwined with their transition. Employing organizations need to be more proactive in managing their workload and addressing workplace incivility. © 2017 John Wiley & Sons Ltd.

  13. Photoelastic and analytical investigation of stress in toroidal magnetic field coils

    International Nuclear Information System (INIS)

    Pih, H.; Gray, W.H.

    1975-01-01

    A series of two-dimensional photoelastic stress analyses on circular and oval toroidal magnetic field coils for fusion reactors were made. The circumferential variation of the coil's magnetic force was simulated by applying different pressures to sixteen segmented regions of the inner surface of the models. Isochromatics and isoclinics were measured at selected points on the loaded model in a transmission polariscope using a microphotometer. Separate principal stresses were obtained using the combination of photoelastic information and isopachic data measured from the solution of Laplace's equation by the electrical analog method. Analysis of the same coil geometries, loadings, and boundary conditions were made using the finite element method. General agreement between theory and experiment was realized. From this investigation several variations of coil geometry and methods of support were evaluated. Based upon this experiment, suggestions for optimum structural design of toroidal field coils are presented

  14. Numerical Investigation on Stress Concentration of Tension Steel Bars with One or Two Corrosion Pits

    Directory of Open Access Journals (Sweden)

    Jian Hou

    2015-01-01

    Full Text Available Pitting corrosion has been observed in steel bars of existing reinforced concrete (RC structures in different erosion environments and has been identified as a potential origin for fatigue crack nucleation. In the present study, under uniaxial tension loading, stress distribution in the steel bars with one or two semiellipsoidal corrosion pits has systematically been investigated by conducting a series of three-dimensional semiellipsoidal pitted models. Based on the finite element analyses, it is shown that stress concentration factor (SCF increases linearly with increasing pit aspect ratio (a/b and increases nonlinearly with increasing pit relative depth (a/R for single corrosion pit problem. For double corrosion pits problem, the SCF decreases nonlinearly with increasing angle of two transverse pits (θ. The interaction of two longitudinal pits can be ignored in the calculation of SCF even if the distance of two pits (d is very small.

  15. Contact with turf algae alters the coral microbiome: contact versus systemic impacts

    Science.gov (United States)

    Pratte, Zoe A.; Longo, Guilherme O.; Burns, Andrew S.; Hay, Mark E.; Stewart, Frank J.

    2018-03-01

    Coral reefs are degrading to algae-dominated reefs worldwide, with alterations of coral microbiomes commonly co-occurring with reef demise. The severe thermal anomaly during the 2016 El Niño event in the South Pacific killed many corals and stressed others. We examined the microbiome of turf algae and of the coral Porites sp. in contact with turf during this thermal event to investigate algal turf effects on the coral microbiome during a period of environmental stress. The microbial composition of turf did not differ between coral-contacted and non-contacted turfs. However, microbiomes of corals in direct contact with turf were similar to those of the turf microbiome, but differed significantly from coral portions 5 cm from the point of turf/coral contact and from portions of the coral that looked most healthy, regardless of location. Although the majority of significant differences occurred in coral samples at the point of contact, a small subset of microbial taxa was enriched in coral tissues taken 5 cm from turf contact compared to all other sample types, including samples from areas of the coral that appeared most healthy. These results suggest that the coral microbiome is susceptible to colonization by microbes from turf, but not vice versa. Results also suggest that algal contact elicits a subtle shift in the coral microbiome just beyond the contact site. The combination of turf microbiome stability and coral microbiome vulnerability at areas of contact may contribute to the continued decline in coral cover and increase in algal cover associated with coral-algae phase shifts.

  16. Investigations into the fungal flora of forest stands under severe stress from immissions

    International Nuclear Information System (INIS)

    Butin, H.

    1992-01-01

    This finalized research project on the fungal flora of forest stands under severe stress form immissions looked into the question of the contribution of fungi to the triggering of topical forest damage and investigated whether correlations between certain symptoms and needle yellowing or root damage can be established. The main tree species selected were spruce and pine; but spot sample checks were also carried out on other tree species. Fungal flora was determined both qualitatively and quantitatively, and the pathogenic significance of the individual species was determined. Further, it was investigated whether fungal species are correlated to certain symptoms of damage, and which fungal species are. For selected fungal species, their pathogenicity was investigated by infection experiments. (RHE) [de

  17. Participation in a US community-based cardiovascular health study: investigating nonrandom selection effects related to employment, perceived stress, work-related stress, and family caregiving.

    Science.gov (United States)

    MacDonald, Leslie A; Fujishiro, Kaori; Howard, Virginia J; Landsbergis, Paul; Hein, Misty J

    2017-09-01

    Participation in health studies may be inversely associated with employment and stress. We investigated whether employment, perceived stress, work-related stress, and family caregiving were related to participation in a longitudinal US community-based health study of black and white men and women aged ≥45 years. Prevalence ratios and confidence intervals were estimated for completion of the second stage (S2) of a two-stage enrollment process by employment (status, type), and stress (perceived stress, work-related stress, caregiving), adjusting for age, sex, race, region, income, and education. Eligibility and consent for a follow-up occupational survey were similarly evaluated. Wage- but not self-employed participants were less likely than the unemployed to complete S2. Among the employed, S2 completion did not vary by stress; however, family caregivers with a short time burden of care (stress levels. Limited evidence of selection bias was seen by employment and stress within a large US community-based cohort, but findings suggest the need for enrollment procedures to consider possible barriers to participation among wage-employed individuals. Published by Elsevier Inc.

  18. Contact dermatitis. A review

    DEFF Research Database (Denmark)

    Andersen, Klaus Ejner; Benezra, C; Burrows, D

    1987-01-01

    In recent years, there has been a dramatic rise in our understanding of contact dermatitis. This paper is a review of our knowledge of the mechanisms involved in contact dermatitis and related phenomena, the investigation of these events and the emergence of significant new allergens during...

  19. Contact Quality in Participation

    DEFF Research Database (Denmark)

    Simonsen, Jesper; Jensen, Olav Storm

    2016-01-01

    We investigate the concept of participation from the perspective of quality of the contact in the communicative interactions between participants. We argue for the need for an academic-personal competence that qualifies the human contact central in all Participatory Design (PD) activities as a way...

  20. Investigating effect and efficiency of short term heat stress applied in food stuff decontamination

    DEFF Research Database (Denmark)

    Andersen, Ann Zahle

    broiler skin as food surface model. We employ advanced fluorescence based visualization methods including 2-photon excitation microscopy and second harmonic imaging microscopy for in-depth characterization of our surface model and of the damages and stress recovery strategies of our model bacteria...... of surviving organisms. In addition the nature of the changes induced in the foodstuff model is investigated in order to reveal possible influence on microbial growth subsequent to treatment. Methods. Because of their relevance in food industry, we employ Listeria and Salmonella as model bacteria and chicken...

  1. Investigation of intergranular stress corrosion cracking in the fuel pool at Three Mile Island Unit 1

    International Nuclear Information System (INIS)

    Czajkowski, C.J.

    1985-01-01

    An intergranular stress corrosion cracking failure of 304 stainless steel pipe in 2000 ppM B as H 3 BO 3 + H 2 O at 100 0 C has been investigated. Constant extension rate testing has produced an intergranular type failure in material in air. Chemical analysis was performed on both the base metal and weld material, in addition to fractography, EPR testing and optical microscopy in discerning the mode of failure. Various effects of Cl - , O 2 , and MnS are discussed. The results have indicated that the cause of failure was the severe sensitization coupled with probable contamination by S and possibly by Cl ions

  2. Main results of BN-600 reactor stress-strain state investigations

    International Nuclear Information System (INIS)

    Panov, V.A.

    1983-01-01

    The development of BN-600 fast reactor plant needed the solution of a series of complex engineering problems including ones for confirming integrity of the most vital structural components. The particular attention was given to the main vessel since reactor availability end safe operation of the plant as a whole depend on vessel strength end integrity. The present report deals with the main results of theoretical and experimental investigations of the stress-strain state of BN-600 reactor vessel carried out during design, start-up and initial bringing the reactor to power

  3. Investigations of linear contraction and shrinkage stresses development in hypereutectic al-si binary alloys

    Directory of Open Access Journals (Sweden)

    J. Mutwil

    2009-07-01

    Full Text Available Shrinkage phenomena during solidification and cooling of hypereutectic aluminium-silicon alloys (AlSi18, AlSi21 have been examined. A vertical shrinkage rod casting with circular cross-section (constant or fixed: tapered has been used as a test sample. Two type of experiments have been conducted: 1 on development of the test sample linear dimension changes (linear expansion/contraction, 2 on development of shrinkage stresses in the test sample. By the linear contraction experiments the linear dimension changes of the test sample and the metal test mould as well a temperature in six points of the test sample have been registered. By shrinkage stresses examination a shrinkage tension force and linear dimension changes of the test sample as well a temperature in three points of the test sample have been registered. Registered time dependences of the test bar and the test mould linear dimension changes have shown, that so-called pre-shrinkage extension has been mainly by mould thermal extension caused. The investigation results have shown that both: the linear contraction as well as the shrinkage stresses development are evident dependent on metal temperature in a warmest region the sample (thermal centre.

  4. Dual Raman-Brillouin spectroscopic investigation of plant stress response and development

    Science.gov (United States)

    Coker, Zachary; Troyanova-Wood, Maria; Marble, Kassie; Yakovlev, Vladislav

    2018-03-01

    Raman and Brillouin spectroscopy are powerful tools for non-invasive and non-destructive investigations of material chemical and mechanical properties. In this study, we use a newly developed custom-built dual Raman-Brillouin microspectroscopy instrument to build on previous works studying in-vivo stress response of live plants using only a Raman spectroscopy system. This dual Raman-Brillouin spectroscopy system is capable of fast simultaneous spectra acquisition from single-point locations. Shifts and changes in a samples Brillouin spectrum indicate a change in the physical characteristics of the sample, namely mechano-elasticity; in measuring this change, we can establish a relationship between the mechanical properties of a sample and known stress response agents, such as reactive oxygen species and other chemical constituents as indicated by peaks in the Raman spectra of the same acquisition point. Simultaneous application of these spectroscopic techniques offers great promise for future development and applications in agricultural and biological studies and can help to improve our understanding of mechanochemical changes of plants and other biological samples in response to environmental and chemically induced stresses at microscopic or cellular level.

  5. Investigation of effective factors of transient thermal stress of the MONJU-System components

    Energy Technology Data Exchange (ETDEWEB)

    Inoue, Masaaki; Hirayama, Hiroshi; Kimura, Kimitaka; Jinbo, M. [Toshiba Corp., Kawasaki, Kanagawa (Japan)

    1999-03-01

    Transient thermal stress of each system Component in the fast breeder reactor is an uncertain factor on it's structural design. The temperature distribution in a system component changes over a wide range in time and in space. An unified evaluation technique of thermal, hydraulic, and structural analysis, in which includes thermal striping, temperature stratification, transient thermal stress and the integrity of the system components, is required for the optimum design of tho fast reactor plant. Thermal boundary conditions should be set up by both the transient thermal stress analysis and the structural integrity evaluation of each system component. The reasonable thermal boundary conditions for the design of the MONJU and a demonstration fast reactor, are investigated. The temperature distribution analysis models and the thermal boundary conditions on the Y-piece structural parts of each system component, such as reactor vessel, intermediate heat exchanger, primary main circulation pump, steam generator, superheater and upper structure of reactor core, are illustrated in the report. (M. Suetake)

  6. Investigations of Residual Stresses and Mechanical Properties of Single Crystal Niobium for SRF Cavities

    International Nuclear Information System (INIS)

    Gnaeupel-Herold, Thomas; Myneni, Ganapati Rao; Ricker, Richard E.

    2007-01-01

    This work investigates properties of large grained, high purity niobium with respect to the forming of superconducting radio frequency (SRF) cavities from such large grained sheets. The yield stresses were examined using tensile specimens that were essentially single crystals in orientations evenly distributed in the standard projection triangle. No distinct yield anisotropy was found, however, vacuum annealing increased the yield strength by a factor 2...3. The deep drawing forming operation of the half cells raises the issues of elastic shape changes after the release of the forming tool (springback) and residual stresses, both of which are indicated to be negligible. This is a consequence of the low yield stress (< 100 MPa) and the large thickness (compared to typical thicknesses in sheet metal forming). However, the significant anisotropy of the transversal plastic strains after uniaxial deformation points to potentially critical thickness variations for large grained / single crystal half cells, thus raising the issue of controlling grain orientation or using single crystal sheet material

  7. Stress-sensitive arterial hypertension, haemodynamic changes and brain metabolites in hypertensive ISIAH rats: MRI investigation.

    Science.gov (United States)

    Seryapina, A A; Shevelev, O B; Moshkin, M P; Markel, A L; Akulov, A E

    2017-05-01

    What is the central question of this study? Stress-sensitive arterial hypertension is considered to be controlled by changes in central and peripheral sympathetic regulating mechanisms, which eventually result in haemodynamic alterations and blood pressure elevation. Therefore, study of the early stages of development of hypertension is of particular interest, because it helps in understanding the aetiology of the disease. What is the main finding and its importance? Non-invasive in vivo investigation in ISIAH rats demonstrated that establishment of sustainable stress-sensitive hypertension is accompanied by a decrease in prefrontal cortex activity and mobilization of hypothalamic processes, with considerable correlations between haemodynamic parameters and individual metabolite ratios. The study of early development of arterial hypertension in association with emotional stress is of great importance for better understanding of the aetiology and pathogenesis of the hypertensive disease. Magnetic resonance imaging (MRI) was applied to evaluate the changes in haemodynamics and brain metabolites in 1- and 3-month-old inherited stress-induced arterial hypertension (ISIAH) rats (10 male rats) with stress-sensitive arterial hypertension and in control normotensive Wistar Albino Glaxo (WAG) rats (eight male rats). In the 3-month-old ISIAH rats, the age-dependent increase in blood pressure was associated with increased blood flow through the renal arteries and decreased blood flow in the lower part of the abdominal aorta. The renal vascular resistance in the ISIAH rats decreased during ageing, although at both ages it remained higher than the renal vascular resistance in WAG rats. An integral metabolome portrait demonstrated that development of hypertension in the ISIAH rats was associated with an attenuation of the excitatory and energetic activity in the prefrontal cortex, whereas in the WAG rats the opposite age-dependent changes were observed. In contrast, in the

  8. Investigation on Stress-Rupture Behavior of a Chopped-Glass-Fiber Composite for Automotive Durability Design Criteria

    Energy Technology Data Exchange (ETDEWEB)

    Ren, W

    2001-08-24

    Practical and inexpensive testing methods were developed to investigate stress-rupture properties of a polymeric composite with chopped glass fiber reinforcement for automotive applications. The material was tested in representative automotive environments to generate experimental data. The results indicate that environments have substantial effects on the stress-rupture behavior. The data were analyzed and developed into stress-rupture design criteria to address one of the durability aspects of the material for automotive structural applications.

  9. Investigation on Stress-Rupture Behavior of a Chopped-Glass-Fiber Composite for Automotive Durability Design Criteria; FINAL

    International Nuclear Information System (INIS)

    Ren, W

    2001-01-01

    Practical and inexpensive testing methods were developed to investigate stress-rupture properties of a polymeric composite with chopped glass fiber reinforcement for automotive applications. The material was tested in representative automotive environments to generate experimental data. The results indicate that environments have substantial effects on the stress-rupture behavior. The data were analyzed and developed into stress-rupture design criteria to address one of the durability aspects of the material for automotive structural applications

  10. Investigating genotype specific response in photosynthetic behavior under drought stress and nitrogen limitation in Brassica rapa.

    Science.gov (United States)

    Pleban, J. R.; Mackay, D. S.; Ewers, B. E.; Weinig, C.; Aston, T.

    2015-12-01

    Challenges in terrestrial ecosystem modeling include characterizing the impact of stress on vegetation and the heterogeneous behavior of different species within the environment. In an effort to address these challenges the impacts of drought and nutrient limitation on the CO2 assimilation of multiple genotypes of Brassica rapa was investigated using the Farquhar Model (FM) of photosynthesis following a Bayesian parameterization and updating scheme. Leaf gas exchange and chlorophyll fluorescence measurements from an unstressed group (well-watered/well-fertilized) and two stressed groups (drought/well-fertilized and well-watered/nutrient limited) were used to estimate FM model parameters. Unstressed individuals were used to initialize Bayesian parameter estimation. Posterior mean estimates yielded a close fit with data as observed assimilation (An) closely matched predicted (Ap) with mean standard error for all individuals ranging from 0.8 to 3.1 μmol CO2 m-2 s-1. Posterior parameter distributions of the unstressed individuals were combined and fit to distributions to establish species level Bayesian priors of FM parameters for testing stress responses. Species level distributions of unstressed group identified mean maximum rates of carboxylation standardized to 25° (Vcmax25) as 101.8 μmol m-2 s-1 (± 29.0) and mean maximum rates of electron transport standardized to 25° (Jmax25) as 319.7 μmol m-2 s-1 (± 64.4). These updated priors were used to test the response of drought and nutrient limitations on assimilation. In the well-watered/nutrient limited group a decrease of 28.0 μmol m-2 s-1 was observed in mean estimate of Vcmax25, a decrease of 27.9 μmol m-2 s-1 in Jmax25 and a decrease in quantum yield from 0.40 mol photon/mol e- in unstressed individuals to 0.14 in the nutrient limited group. In the drought/well-fertilized group a decrease was also observed in Vcmax25 and Jmax25. The genotype specific unstressed and stressed responses were then used to

  11. Effect of assembly error of bipolar plate on the contact pressure distribution and stress failure of membrane electrode assembly in proton exchange membrane fuel cell

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Dong' an; Peng, Linfa; Lai, Xinmin [State Key Laboratory of Mechanical System and Vibration, Shanghai Jiao Tong University, Shanghai 200240 (China)

    2010-07-01

    In practice, the assembly error of the bipolar plate (BPP) in a PEM fuel cell stack is unavoidable based on the current assembly process. However its effect on the performance of the PEM fuel cell stack is not reported yet. In this study, a methodology based on FEA model, ''least squares-support vector machine (LS-SVM)'' simulation and statistical analysis is developed to investigate the effect of the assembly error of the BPP on the pressure distribution and stress failure of membrane electrode assembly (MEA). At first, a parameterized FEA model of a metallic BPP/MEA assembly is established. Then, the LS-SVM simulation process is conducted based on the FEA model, and datasets for the pressure distribution and Von Mises stress of MEA are obtained, respectively for each assembly error. At last, the effect of the assembly error is obtained by applying the statistical analysis to the LS-SVM results. A regression equation between the stress failure and the assembly error is also built, and the allowed maximum assembly error is calculated based on the equation. The methodology in this study is beneficial to understand the mechanism of the assembly error and can be applied to guide the assembly process for the PEM fuel cell stack. (author)

  12. Investigation Effect of Shift Work on Job Burnout and Depression, Anxiety, Stress Scale in Military Personnel

    Directory of Open Access Journals (Sweden)

    Ayoub Ghanbary Sartang

    2018-06-01

    Full Text Available Shift work has been recognized as an important tool for organizing of work in developing countries. The disturbed depression, stress accident are the most common health‐related effects of shift work. The military personnel shift worker during work, are exposed to stress and psychological pressure that certainly affect the efficiency of their work. The aim of this study was to Investigation Effect of shift work on job burnout and Depression, Anxiety, Stress Scale in military personnel. This cross-sectional study was carried out on 100 military personnel male in Southern Iran. Respondents were divided into two groups based on their working schedule (50 shift work personnel / 50 day work personnel. Data collection tools were a Depression, Anxiety, and Stress Scale (DASS-21, demographic characteristics and Maslach job burnout questionnaire. Convenience sampling was used as sampling method. Finally, Data analysis was performed with SPSS (version 20, descriptive statistics, One Way Anova test, ANCOVA and t-independent test. The results of showed that shift work has an impact on burnout and DASS-21 and mean obtained score for DASS-21 and job burnout in shift workers are more day work individuals. Analysis of variance test showed significant difference between job burnout in day workers and shift workers and job burnout were more in shift workers. Also significant difference between DASS-21 in day workers and shift workers and DASS-21 was more in shift workers. This study showed that shift work has an impact on burnout and scale DASS-21 shall is taken to Intervention actions in shift works.

  13. HTSC-Josephson step contacts

    International Nuclear Information System (INIS)

    Herrmann, K.

    1994-03-01

    In this work the properties of josephson step contacts are investigated. After a short introduction into Josephson step contacts the structure, properties and the Josphson contacts of YBa 2 Cu 3 O 7-x high-T c superconductors is presented. The fabrication of HTSC step contacts and the microstructure is discussed. The electric properties of these contacts are measured together with the Josephson emission and the magnetic field dependence. The temperature dependence of the stationary transport properties is given. (WL)

  14. HARDINESS, WORLD ASSUMPTIONS, MOTIVATION OF ATHLETES OF CONTACT AND NOT CONTACT KINDS OF SPORT

    Directory of Open Access Journals (Sweden)

    Elena Vladimirovna Molchanova

    2017-04-01

    Full Text Available Investigation of personal psychological specificity of athletes of contact (freestyle wrestling and not contact (archery kinds of sport were carried out. Pronounced deviation in hardiness, world assumptions, motives for sport doing were obtained. In particularly, archery athletes possess higher values of hardiness and positively view the world, than wrestlers, while possess less motives for sport doing as “successful for life quality and skills” and “physical perfection”. Thus for athletes not contact kinds of sports rather coping in permanent stressed conditions are predicted. The obtained results are practically important for counseling work of sport psychologists and moreover they could be a basement for training teach programs and challenge stress overcoming programs.

  15. Photoelastic investigation of the stresses in a stepped cylinder under internal pressure

    International Nuclear Information System (INIS)

    Sawa, Yoshiaki; Nishida, Masataka

    1985-01-01

    The states of stress distribution of the stepped cylinder under inner-pressure are studied by means of stress freezing photoelastic method. The experimental results reveal that fiber stress concentration occurs on the circular arc and hoop stress concentration occurs at the jointing point of the straight line and the arc and that each maximum value of fiver stress and hoop stress depends very greatly on the diameter of a small cylinder and the radius of curvature. And the relationship between the stress concentration factors and these shape factors are given. Effects of wall thickness on the stress concentration factors are also determined. (author)

  16. Investigation on the variation of channel resistance and contact resistance of SiZnSnO semiconductor depending on Si contents using transmission line method

    Science.gov (United States)

    Lee, Byeong Hyeon; Han, Sangmin; Lee, Sang Yeol

    2018-01-01

    Amorphous silicon-zinc-tin-oxide (a-SZTO) thin film transistors (TFTs) have been fabricated depending on the silicon ratio in channel layers. The a-SZTO TFT exhibited high electrical properties, such as high mobility of 23 cm2 V-1 s-1, subthreshold swing of 0.74 V/decade and ION/OFF of 2.8 × 108, despite of the addition of Si suppressor. The physical mechanism on the change of the sheet resistance and the contact resistance in a-SZTO TFT has been investigated and proposed closely related with the Si ratio. Both resistances were increased as increasing Si ratio, which clearly indicated that the role of Si is a carrier suppressor directly leading to the increase of channel and contact resistances. To explain the role of Si as a carrier suppressor, the conduction band offset mechanism has been also proposed depending on the change of carrier concentration in channel layer and at the interface between electrode and channel layer. 2007.01-2011.12 Senior Researcher at korea institute of science and technology (KOREA). 2008.01-2011.12 Professor at University of Science and Technology (KOREA). 1995.01-2007.12 Professor at Yonsei University (KOREA). 2002.01-2003.12 Inviting Researcher at Los Alamos National Lab (USA). 1993.01-1995.12 Senior Researcher at Electronics and Telecommunications Research Institute (KOREA). 1992.01-1993.01 Research Associate at State University of New York at Buffalo (USA).

  17. Electrical contacts principles and applications

    CERN Document Server

    Slade, Paul G

    2013-01-01

    Covering the theory, application, and testing of contact materials, Electrical Contacts: Principles and Applications, Second Edition introduces a thorough discussion on making electric contact and contact interface conduction; presents a general outline of, and measurement techniques for, important corrosion mechanisms; considers the results of contact wear when plug-in connections are made and broken; investigates the effect of thin noble metal plating on electronic connections; and relates crucial considerations for making high- and low-power contact joints. It examines contact use in switch

  18. An SFG and DFG investigation of polycrystalline Au, Au-Cu and Au-Ag-Cu electrodes in contact with aqueous solutions containing KCN

    International Nuclear Information System (INIS)

    Bozzini, Benedetto; Busson, Bertrand; De Gaudenzi, Gian Pietro; Mele, Claudio; Tadjeddine, Abderrahmane

    2007-01-01

    In this paper, the behaviour of polycrystalline Au, Au-Cu (Cu 25%) and Au-Ag-Cu (Ag 10%, Cu 15%) electrodes in contact with neutral aqueous solutions of KCN has been studied as a function of potential by means of in situ sum frequency generation (SFG) and difference frequency generation (DFG) spectroscopies. The potential-dependent spectra have been analysed quantitatively with a model for the second-order non-linear susceptibility accounting for vibrational and electronic effects. The potential-dependence of the CN - stretching band position and of the free-electron contribution to the real part of the non-resonant component of the second-order susceptibility have been accounted for. Spectroelectrochemical results were complemented by cyclic voltammetric measurements. The chief stress in this work has been placed on systematising and quantifying the interaction between the vibrational and electronic structures of the electrodic interfaces studied. The effects of adsorbates on the electronic structure of the adsorbing electrode, as a function of electrode alloy composition and applied potential are particularly critical for the understanding of Au-alloy electrochemistry in the presence of cyanide and cyanocomplexes. The systematic comparison of SFG and DFG spectra measured under the same electrochemical conditions for Au, Au-Cu and Au-Ag-Cu electrodes discloses a rich phenomenology related to the electronic structure of the interface

  19. An SFG and DFG investigation of polycrystalline Au, Au-Cu and Au-Ag-Cu electrodes in contact with aqueous solutions containing KCN

    Energy Technology Data Exchange (ETDEWEB)

    Bozzini, Benedetto [Dipartimento di Ingegneria dell' Innovazione, Universita di Lecce, v. Monteroni, I-73100 Lecce (Italy)]. E-mail: benedetto.bozzini@unile.it; Busson, Bertrand [CLIO-LCP, Universite Paris-Sud, 91405 Orsay Cedex (France); De Gaudenzi, Gian Pietro [Dipartimento di Ingegneria dell' Innovazione, Universita di Lecce, v. Monteroni, I-73100 Lecce (Italy); Mele, Claudio [Dipartimento di Ingegneria dell' Innovazione, Universita di Lecce, v. Monteroni, I-73100 Lecce (Italy); Tadjeddine, Abderrahmane [UDIL-CNRS, Bat. 201, Centre Universitaire Paris-Sud, BP 34, 91898 Orsay Cedex (France)

    2007-01-16

    In this paper, the behaviour of polycrystalline Au, Au-Cu (Cu 25%) and Au-Ag-Cu (Ag 10%, Cu 15%) electrodes in contact with neutral aqueous solutions of KCN has been studied as a function of potential by means of in situ sum frequency generation (SFG) and difference frequency generation (DFG) spectroscopies. The potential-dependent spectra have been analysed quantitatively with a model for the second-order non-linear susceptibility accounting for vibrational and electronic effects. The potential-dependence of the CN{sup -} stretching band position and of the free-electron contribution to the real part of the non-resonant component of the second-order susceptibility have been accounted for. Spectroelectrochemical results were complemented by cyclic voltammetric measurements. The chief stress in this work has been placed on systematising and quantifying the interaction between the vibrational and electronic structures of the electrodic interfaces studied. The effects of adsorbates on the electronic structure of the adsorbing electrode, as a function of electrode alloy composition and applied potential are particularly critical for the understanding of Au-alloy electrochemistry in the presence of cyanide and cyanocomplexes. The systematic comparison of SFG and DFG spectra measured under the same electrochemical conditions for Au, Au-Cu and Au-Ag-Cu electrodes discloses a rich phenomenology related to the electronic structure of the interface.

  20. An Investigation into How Female Teachers Manage Stress and Teacher Burnout: A Case Study of West Akim Municipality of Ghana

    Science.gov (United States)

    Addison, Asonaba Kofi; Yankyera, George

    2015-01-01

    The purpose of this study was to investigate into how female teachers in Asamankese Circuit II in West Akim Municipality of Ghana Education Service manage stress and teacher burnout, and explore the causes, effects, and ways of improving work-related stress for better standard of education. The study was conducted with qualitative research…

  1. On the stress investigation at the edges of the fixed elastic semi-strip

    Directory of Open Access Journals (Sweden)

    N. Vaysfeld

    2016-10-01

    Full Text Available The stress state of the elastic fixed semi-strip with the regarding of the singularities at its edge is investigated in the article. The initial boundary problem is reduced to a vector boundary problem in the transformation’s domain by the use of integral Fourier transformation. The one-dimensional vector boundary problem is solved exactly with the help of matrix differential calculations and Green’s matrix apparatus. The problem’s solving was focused at the solving of the singular integral equation (SIE with the two fixed singularities at the ends of the integration’s interval. The symbol of SIE was constructed and the generalized method of the SIE solving was applied. The stress’ distributions of the semi-strip are investigated

  2. Investigation of Arsenic-Stressed Yeast (Saccharomyces cerevisiae as a Bioassay in Homeopathic Basic Research

    Directory of Open Access Journals (Sweden)

    Tim Jäger

    2011-01-01

    Full Text Available This study investigated the response of arsenic-stressed yeast (Saccharomyces cerevisiae towards homeopathically potentized Arsenicum album, a duckweed nosode, and gibberellic acid. The three test substances were applied in five potency levels (17x, 18x, 24x, 28x, 30x and compared to controls (unsuccussed and succussed water with respect to influencing specific growth parameters. Five independent experiments were evaluated for each test substance. Additionally, five water control experiments were analyzed to investigate the stability of the experimental setup (systematic negative control experiments. All experiments were randomized and blinded. Yeast grew in microplates over a period of 38 h in either potentized substances or water controls with 250 mg/l arsenic(V added over the entire cultivation period. Yeast's growth kinetics (slope, Et50, and yield were measured photometrically. The test system exhibited a low coefficient of variation (slope 1.2%, Et50 0.3%, yield 2.7%. Succussed water did not induce any significant differences compared to unsuccussed water. Data from the control and treatment groups were both pooled to increase statistical power. In this study with yeast, no significant effects were found for any outcome parameter or any homeopathic treatment. Since in parallel experiments arsenic-stressed duckweed showed highly significant effects after application of potentized Arsenicum album and duckweed nosode preparations from the same batch as used in the present study, some specific properties of this experimental setup with yeast must be responsible for the lacking response.

  3. Investigation of stress of man caused by work and climate in salt mining

    International Nuclear Information System (INIS)

    Luerig, H.J.; Thien, P.

    1983-02-01

    To find out a relation between load caused by work and (mine) climate and the resulting stress of the employees under the conditions of the salt mining in Niedersachsen an underground field investigation was performed with 240 mineworkers. Besides the climatic elements dry-, wet-bulb temperature and air speed the heaviness of the work, the working sequence and the physiological magnitudes heart-beat rate and body temperature were included with respect to the physical efficiency of the patients. The dry-bulb temperature varied between 9 and about 50 0 C and the relative humidities between 5 and 20%, very strong varying air velocity and radiation temperatures equal to the dry-bulb temperature. The transformation of energy which characterizes the heaviness of work for the single activities mainly lay in the range of light to moderate work. Transgressions of the limiting value of the body temperature of 39 0 C did not occur. Apart from one exception a continuous increase of the heart-beat rate was not found. Increased stresses can be expected especially for blasting truck operators and repair works. Laboratory and simulation tests agree with the results of the present field investigation considering special limiting conditions. In salt mining Niedersachsen the application of the dry-bulb temperature as standard seems justified, as more other measures of climate, are not expected to yield more accurate data. (orig.) [de

  4. An experimental investigation of the interaction of primary and secondary stresses in fuel plates

    International Nuclear Information System (INIS)

    Swinson, W.F.; Battiste, R.L.; Yahr, G.T.

    1996-01-01

    If the load is not relieved as a structure starts to yield, the induced stress is defined as primary stress. If the load relaxes, as a structure begins yield the induced stress is defined as secondary stress. In design it is not uncommon to give more weight to primary stresses than to secondary stresses. However, knowing when this is good design practice and when it is not good design practice represents a problem. In particular, the fuel plates in operating reactors contain both primary stresses and secondary stresses and to properly assess a design there is a need to assign design weights to the stresses. Tests were conducted on reactor fuel plates intended for the Advanced Neutron Source (ANS) to determine the potential of giving different design weights to the primary and secondary stresses. The results of these tests and the conclusion that the stresses should be weighted the same are given in this paper

  5. An experimental investigation on the interaction of primary and secondary stresses in fuel plates

    International Nuclear Information System (INIS)

    Swinson, W.F.; Battiste, R.L.; Yahr, G.T.

    1997-01-01

    If the load is not relieved as a structure starts to yield, the induced stress is defined as primary stress. If the load relaxes, as a structure begins to yield the induced stress is defined as secondary stress. In design, it is not uncommon to give more weight to primary stresses than to secondary stresses. However, knowing when this is good design practice and when it is not good design practice represent a problem. In particular, the fuel plates in operating reactors contain both primary stresses and secondary stresses, and to properly assess a design there is a need to assign design weights to the stresses. Tests were conducted on reactor fuel plates intended for the advanced neutron source (ANS) to determine the potential of giving different design weights to the primary and secondary stresses. The results of these tests and the conclusion that the stresses should be weighted the same are given in this paper

  6. Factors influencing post-traumatic stress in Korean forensic science investigators.

    Science.gov (United States)

    Yoo, Yang-Sook; Cho, Ok-Hee; Cha, Kyeong-Sook; Boo, Yun-Jeong

    2013-09-01

    The aim of this study was to understand factors that influence post-traumatic stress (PTS) in Korean forensic science investigators. A total of 111 forensic science investigators were recruited in Korea. PTS was measured using the tool modified by Choi (2001) from the original developed by Foa, Riggs, Dancu, and Rothbaum (1993) based on DSM-IV. Factors influencing PTS included demographic and job-related characteristics, emotional intelligence, and death anxiety. PTS scores were positively correlated with personality type, fatigue from work, and death anxiety. PTS scores were negatively correlated with length of career as a forensic science investigator and emotional intelligence. The factors that had the greatest influence on PTS were death anxiety, years spent as a forensic science investigator, personality type, emotional intelligence, fatigue, and homicide experience. The explanatory power of these six factors was 44.0%. Therefore, it is necessary to regularly evaluate the mental health of those who are vulnerable to PTS. Based on these results, various interventions could be implemented for promoting overall health of the forensic science investigators. Copyright © 2013. Published by Elsevier B.V.

  7. Investigation of tunneling current and local contact potential difference on the TiO2(110) surface by AFM/KPFM at 78 K.

    Science.gov (United States)

    Wen, Huan Fei; Li, Yan Jun; Arima, Eiji; Naitoh, Yoshitaka; Sugawara, Yasuhiro; Xu, Rui; Cheng, Zhi Hai

    2017-03-10

    We propose a new multi-image method for obtaining the frequency shift, tunneling current and local contact potential difference (LCPD) on a TiO 2 (110) surface with atomic resolution. The tunneling current image reveals rarely observed surface oxygen atoms contrary to the conventional results. We analyze how the surface and subsurface defects affect the distribution of the LCPD. In addition, the subsurface defects are observed clearly in the tunneling current image, in contrast to a topographic image. To clarify the origin of the atomic contrast, we perform site-dependent spectroscopy as a function of the tip-sample distance. The multi-image method is expected to be widely used to investigate the charge transfer phenomena between the nanoparticles and surface sites, and it is useful for elucidating the mechanisms of catalytic reactions.

  8. Nature Contacts: Employee Wellness in Healthcare.

    Science.gov (United States)

    Trau, Deborah; Keenan, Kimberly A; Goforth, Meggan; Large, Vernon

    2016-04-01

    This study was designed to ascertain the amount of outdoor, indoor, and indirect nature contact exposures hospital employees have in a workweek. Hospital employees have been found particularly vulnerable to work-related stress. Increasing the nature contact exposure for hospital employees can reduce perceived stress; stress-related health behaviors; and stress-related health outcomes from outdoor, indoor, and indirect exposures to nature. Staff on the fourth floor postsurgical unit of a large hospital (N = 42) were ask to participate in an employee questionnaire "nature contact questionnaire". This 16-item nature environment questionnaire measures the amount and types of nature contact exposures employees have during a workweek. Majority of employees reported few, if any, nature contact exposures, specifically in the area of outdoor nature contacts with limited indoor and indirect contacts. These results indicated that employees on the fourth floor postsurgical floor have limited ability to reduce stress through nature contact exposures which could impact their perceived levels of work stress and stress-related behaviors and health outcomes. Nature contact exposures are both a relatively easy and an inexpensive way to improve employee stress. These findings indicate limitations to employees' exposure to nature contacts. Healthcare environments would benefit from a concerted effort to provide increased outdoor, indoor, and indirect nature contact exposures for employees. © The Author(s) 2015.

  9. Investigating the cognitive precursors of emotional response to cancer stress: re-testing Lazarus's transactional model.

    Science.gov (United States)

    Hulbert-Williams, N J; Morrison, V; Wilkinson, C; Neal, R D

    2013-02-01

    Lazarus's Transactional Model of stress and coping underwent significant theoretical development through the 1990s to better incorporate emotional reactions to stress with their appraisal components. Few studies have robustly explored the full model. This study aimed to do so within the context of a major life event: cancer diagnosis. A repeated measures design was used whereby data were collected using self-report questionnaire at baseline (soon after diagnosis), and 3- and 6-month follow-up. A total of 160 recently diagnosed cancer patients were recruited (mean time since diagnosis = 46 days). Their mean age was 64.2 years. Data on appraisals, core-relational themes, and emotions were collected. Data were analysed using both Spearman's correlation tests and multivariate regression modelling. Longitudinal analysis demonstrated weak correlation between change scores of theoretically associated components and some emotions correlated more strongly with cognitions contradicting theoretical expectations. Cross-sectional multivariate testing of the ability of cognitions to explain variance in emotion was largely theory inconsistent. Although data support the generic structure of the Transactional Model, they question the model specifics. Larger scale research is needed encompassing a wider range of emotions and using more complex statistical testing. WHAT IS ALREADY KNOWN ON THIS SUBJECT?: • Stress processes are transactional and coping outcome is informed by both cognitive appraisal of the stressor and the individual's emotional response (Lazarus & Folkman, 1984). • Lazarus (1999) made specific hypotheses about which particular stress appraisals would determine which emotional response, but only a small number of these relationships have been robustly investigated. • Previous empirical testing of this theory has been limited by design and statistical limitations. WHAT DOES THIS STUDY ADD?: • This study empirically investigates the cognitive precedents of a

  10. Stress

    Science.gov (United States)

    ... taking care of an aging parent. With mental stress, the body pumps out hormones to no avail. Neither fighting ... with type 1 diabetes. This difference makes sense. Stress blocks the body from releasing insulin in people with type 2 ...

  11. Electric contact arcing

    International Nuclear Information System (INIS)

    Cuthrell, R.E.

    1976-01-01

    Electrical contacts must function properly in many types of components used in nuclear weapon systems. Design, application, and testing of these components require detailed knowledge of chemical and physical phenomena associated with stockpile storage, stockpile testing, and operation. In the past, investigation of these phenomena has led to significant discoveries on the effects of surface contaminants, friction and wear, and the mechanics of closure on contact performance. A recent investigation of contact arcing phenomena which revealed that, preceding contact closure, arcs may occur at voltages lower than had been previously known is described. This discovery is important, since arcing may damage contacts, and repetitive testing of contacts performed as part of a quality assurance program might produce cumulative damage that would yield misleading life-test data and could prevent proper operation of the contacts at some time in the future. This damage can be avoided by determining the conditions under which arcing occurs, and ensuring that these conditions are avoided in contact testing

  12. Mechanical Contact Experiments and Simulations

    DEFF Research Database (Denmark)

    Nielsen, Chris Valentin; Martins, P; Zhang, W.

    2011-01-01

    Mechanical contact is studied under dynamic development by means of a combined numerical and experimental investigation. The experiments are designed to allow dynamical development of non-planar contact areas with significant expansion in all three directions as the load is increased. Different....... The overall investigation serves for testing and validating the numerical implementation of the mechanical contact, which is one of the main contributions to a system intended for 3D simulation of resistance welding. Correct modelling of contact between parts to be welded, as well as contact with electrodes......, is crucial for satisfactory modelling of the resistance welding process. The resistance heating at the contact interfaces depends on both contact area and pressure, and as the contact areas develop dynamically, the presented tests are relevant for assessing the validity and accuracy of the mechanical contact...

  13. Investigation on stresses of superconductors under pulsed magnetic fields based on multiphysics model

    International Nuclear Information System (INIS)

    Yang, Xiaobin; Li, Xiuhong; He, Yafeng; Wang, Xiaojun; Xu, Bo

    2017-01-01

    Highlights: • The differential equation including temperature and magnetic field was derived for a long cylindrical superconductor. • Thermal stress and electromagnetic stress were studied at the same time under pulse field magnetizing. • The distributions of the magnetic field, the temperature and stresses are studied and compared for two pulse fields of the different duration. • The Role thermal stress and electromagnetic stress play in the process of pulse field magnetizing is discussed. - Abstract: A multiphysics model for the numerical computation of stresses, trapped field and temperature distribution of a infinite long superconducting cylinder is proposed, based on which the stresses, including the thermal stresses and mechanical stresses due to Lorentz force, and trapped fields in the superconductor subjected to pulsed magnetic fields are analyzed. By comparing the results under pulsed magnetic fields with different pulse durations, it is found that the both the mechanical stress due to the electromagnetic force and the thermal stress due to temperature gradient contribute to the total stress level in the superconductor. For pulsed magnetic field with short durations, the thermal stress is the dominant contribution to the total stress, because the heat generated by AC-loss builds up significant temperature gradient in such short durations. However, for a pulsed field with a long duration the gradient of temperature and flux, as well as the maximal tensile stress, are much smaller. And the results of this paper is meaningful for the design and manufacture of superconducting permanent magnets.

  14. Investigation on stresses of superconductors under pulsed magnetic fields based on multiphysics model

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Xiaobin, E-mail: yangxb@lzu.edu.cn; Li, Xiuhong; He, Yafeng; Wang, Xiaojun; Xu, Bo

    2017-04-15

    Highlights: • The differential equation including temperature and magnetic field was derived for a long cylindrical superconductor. • Thermal stress and electromagnetic stress were studied at the same time under pulse field magnetizing. • The distributions of the magnetic field, the temperature and stresses are studied and compared for two pulse fields of the different duration. • The Role thermal stress and electromagnetic stress play in the process of pulse field magnetizing is discussed. - Abstract: A multiphysics model for the numerical computation of stresses, trapped field and temperature distribution of a infinite long superconducting cylinder is proposed, based on which the stresses, including the thermal stresses and mechanical stresses due to Lorentz force, and trapped fields in the superconductor subjected to pulsed magnetic fields are analyzed. By comparing the results under pulsed magnetic fields with different pulse durations, it is found that the both the mechanical stress due to the electromagnetic force and the thermal stress due to temperature gradient contribute to the total stress level in the superconductor. For pulsed magnetic field with short durations, the thermal stress is the dominant contribution to the total stress, because the heat generated by AC-loss builds up significant temperature gradient in such short durations. However, for a pulsed field with a long duration the gradient of temperature and flux, as well as the maximal tensile stress, are much smaller. And the results of this paper is meaningful for the design and manufacture of superconducting permanent magnets.

  15. Cold Stress

    Science.gov (United States)

    ... Publications and Products Programs Contact NIOSH NIOSH COLD STRESS Recommend on Facebook Tweet Share Compartir Workers who ... cold environments may be at risk of cold stress. Extreme cold weather is a dangerous situation that ...

  16. Heat Stress

    Science.gov (United States)

    ... Publications and Products Programs Contact NIOSH NIOSH HEAT STRESS Recommend on Facebook Tweet Share Compartir OSHA-NIOSH ... hot environments may be at risk of heat stress. Exposure to extreme heat can result in occupational ...

  17. Investigation of reliability attributes and accelerated stress factors on terrestrial solar cells

    Science.gov (United States)

    Lathrop, J. W.; Prince, J. L.

    1980-04-01

    Three tasks were undertaken to investigate reliability attributes of terrestrial solar cells: (1) a study of the electrical behavior of cells in the second (reverse) quadrant; (2) the accelerated stress testing of three new state-of-the-art cells; and (3) the continued bias-temperature testing of four block 2 type silicon cells at 78 C and 135 C. Electrical characteristics measured in the second quadrant were determined to be a function of the cell's thermal behavior with breakdown depending on the initiation of localized heating. This implied that high breakdown cells may be more fault tolerant when forced to operate in the second quadrant, a result contrary to conventional thinking. The accelerated stress tests used in the first (power) quadrant were bias-temperature, bias-temperature-humidity, temperature-humidity, thermal shock, and thermal cycle. The new type cells measured included an EFG cell, a polycrystalline cell, and a Czochralski cell. Significant differences in the response to the various tests were observed between cell types. A microprocessed controlled, short interval solar cell tester was designed and construction initiated on a prototype.

  18. Investigating the dissociative subtype of posttraumatic stress disorder in a sample of traumatized detained youth.

    Science.gov (United States)

    Bennett, Diana C; Modrowski, Crosby A; Kerig, Patricia K; Chaplo, Shannon D

    2015-09-01

    In this study, we tested the validity of a dissociative subtype in a sample of 225 detained adolescents (142 boys, 83 girls) likely meeting full or partial criteria for posttraumatic stress disorder (PTSD). Competing theories of dissociation pose controversy regarding dissociation as a taxon versus a continuum, and results of the current study contribute to this debate by providing evidence of distinct group differences between those high and low in dissociation. Mixture modeling revealed 2 groups of youth with differing levels of depersonalization/derealization dissociative symptoms. Differences between the 2 groups of youth were investigated regarding trauma exposure and several posttraumatic reactions: posttraumatic stress symptoms (PTSS), emotion dysregulation, and emotional numbing. Compared with youth classified in the low-dissociation group, youth who exhibited high levels of dissociation demonstrated higher levels of total PTSS, posttraumatic symptom clusters of emotional numbing, intrusion, and associated features, as well as reporting more difficulties with emotion dysregulation. To test theory regarding the factors that increase the likelihood of persistent dissociation, bootstrapped regression analyses were performed to examine the possibility of an indirect effect of peritraumatic dissociation. Results consistent with statistical mediation suggested that the presence of peritraumatic dissociation at the time of trauma may contribute to the continuation of dissociative symptoms as a more generalized pattern. The results of the current study have implications for clinical treatment with traumatized youth. (c) 2015 APA, all rights reserved).

  19. Numerical simulations of rough contacts between viscoelastic materials

    Science.gov (United States)

    Spinu, S.; Cerlinca, D.

    2017-08-01

    The durability of the mechanical contact is often plagued by surface-related phenomena like rolling contact fatigue, wear or crack propagation, which are linked to the important gradients of stress arising in the contacting bodies due to interaction at the asperity level. The semi-analytical computational approach adopted in this paper is based on a previously reported algorithm capable of simulating the contact between bodies with arbitrary limiting surfaces and viscoelastic behaviour, which is enhanced and adapted for the contact of real surfaces with microtopography. As steep slopes at the asperity level inevitably lead to localized plastic deformation at the tip of the asperities that are first brought into contact, the viscoelastic behaviour is amended by limiting the maximum value of the pressure on the contact area to that of the material hardness, according to the Tabor equation. In this manner, plasticity is considered in a simplified manner that assures the knowledge of the contact area and of the pressure distribution without estimation of the residual state. The main advantage of this approach is the preservation of the algorithmic complexity, allowing the simulation of very fine meshes capable of capturing particular features of the investigated contacting surface. The newly advanced model is expected to predict the contact specifics of rough surfaces as resulting from various manufacturing processes, thus assisting the design of durable machine elements using elastomers or rubbers.

  20. Contact fatigue of human enamel: Experiments, mechanisms and modeling.

    Science.gov (United States)

    Gao, S S; An, B B; Yahyazadehfar, M; Zhang, D; Arola, D D

    2016-07-01

    Cyclic contact between natural tooth structure and engineered ceramics is increasingly common. Fatigue of the enamel due to cyclic contact is rarely considered. The objectives of this investigation were to evaluate the fatigue behavior of human enamel by cyclic contact, and to assess the extent of damage over clinically relevant conditions. Cyclic contact experiments were conducted using the crowns of caries-free molars obtained from young donors. The cuspal locations were polished flat and subjected to cyclic contact with a spherical indenter of alumina at 2Hz. The progression of damage was monitored through the evolution in contact displacement, changes in the contact hysteresis and characteristics of the fracture pattern. The contact fatigue life diagram exhibited a decrease in cycles to failure with increasing cyclic load magnitude. Two distinct trends were identified, which corresponded to the development and propagation of a combination of cylindrical and radial cracks. Under contact loads of less than 400N, enamel rod decussation resisted the growth of subsurface cracks. However, at greater loads the damage progressed rapidly and accelerated fatigue failure. Overall, cyclic contact between ceramic appliances and natural tooth structure causes fatigue of the enamel. The extent of damage is dependent on the magnitude of cyclic stress and the ability of the decussation to arrest the fatigue damage. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. Investigation of corrosion and stress corrosion cracking in bolting materials on light water reactors

    International Nuclear Information System (INIS)

    Czajkowski, C.J.

    1986-01-01

    Laboratory experiments performed at Brookhaven National Laboratory have shown that the concentration of boric acid to a moist paste at approximately the boiling point of water can produce corrosion rates of the order of approximately 3.5mm per year on bolting and piping materials, which values are consistent with service experience. Other failure evaluation experience has shown that primary coolant-lubricant interaction may lead to stress corrosion cracking (SCC) of steam generator manway studs. An investigation was also performed on eleven lubricants and their effects on A193 B7 and A540 B24 bolting materials. H 2 S generation by the lubricants, coefficient of friction results and transgranular SCC of the bolting materials in steam are discussed. (author)

  2. Investigation of corrosion and stress corrosion cracking in bolting materials on light water reactors

    International Nuclear Information System (INIS)

    Czajkowski, C.J.

    1985-01-01

    Laboratory experiments performed at BNL have shown that the concentration of boric acid to a moist paste at approximately the boiling point of water can produce corrosion rates of the order of several tenths of an inch per year on bolting and piping materials, which values are consistent with service experience. Other failure evaluation experience has shown that primary coolant/lubricant interaction may lead to stress corrosion cracking (SCC) of steam generator manway studs. An investigation was also performed on eleven lubricants and their effects on A193 B7 and A540 B24 bolting materials. H 2 S generation by the lubricants, coefficient of friction results and transgranular SCC of the bolting materials in steam are discussed. 13 refs

  3. Live-cell Imaging Approaches for the Investigation of Xenobiotic-Induced Oxidant Stress

    Science.gov (United States)

    BACKGROUND: Oxidant stress is arguably a universal feature in toxicology. Research studies on the role of oxidant stress induced by xenobiotic exposures have typically relied on the identification of damaged biomolecules using a variety of conventional biochemical and molecular t...

  4. Investigation of the effects of process sequence on the contact resistance characteristics of coated metallic bipolar plates for polymer electrolyte membrane fuel cells

    Science.gov (United States)

    Turan, Cabir; Cora, Ömer Necati; Koç, Muammer

    2013-12-01

    In this study, results of an investigation on the effects of manufacturing and coating process sequence on the contact resistance (ICR) of metallic bipolar plates (BPP) for polymer electrolyte membrane fuel cells (PEMFCs) are presented. Firstly, uncoated stainless steel 316L blanks were formed into BPP through hydroforming and stamping processes. Then, these formed BPP samples were coated with three different PVD coatings (CrN, TiN and ZrN) at three different thicknesses (0.1, 0.5 and 1 μm). Secondly, blanks of the same alloy were coated first with the same coatings, thickness and technique; then, they were formed into BPPs of the same shape and dimensions using the manufacturing methods as in the first group. Finally, these two groups of BPP samples were tested for their ICR to reveal the effect of process sequence. ICR tests were also conducted on the BPP plates both before and after exposure to corrosion to disclose the effect of corrosion on ICR. Coated-then-formed BPP samples exhibited similar or even better ICR performance than formed-then-coated BPP samples. Thus, manufacturing of coated blanks can be concluded to be more favorable and worth further investigation in quest of making cost effective BPPs for mass production of PEMFC.

  5. Spatially resolved investigation of systemic and contact pesticides in plant material by desorption electrospray ionization mass spectrometry imaging (DESI-MSI).

    Science.gov (United States)

    Gerbig, Stefanie; Brunn, Hubertus E; Spengler, Bernhard; Schulz, Sabine

    2015-09-01

    Distribution of pesticides both on the surface of leaves and in cross sections of plant stem and leaves was investigated using desorption electrospray ionization mass spectrometry imaging (DESI-MSI) with a spatial resolution of 50-100 μm. Two commercially available insecticide sprays containing different contact pesticides were applied onto leaves of Cotoneaster horizontalis, and the distributions of all active ingredients were directly analyzed. The first spray contained pyrethrins and rapeseed oil, both known as natural insecticides. Each component showed an inhomogeneous spreading throughout the leaf, based on substance polarity and solubility. The second spray contained the synthetic insecticides imidacloprid and methiocarb. Imidacloprid accumulated on the border of the leaf, while methiocarb was distributed more homogenously. In order to investigate the incorporation of a systemically acting pesticide into Kalanchoe blossfeldiana, a commercially available insecticide tablet containing dimethoate was spiked to the soil of the plant. Cross sections of the stem and leaf were obtained 25 and 60 days after application. Dimethoate was mainly detected in the transport system of the plant after 25 days, while it was found to be homogenously distributed in a leaf section after 60 days.

  6. The Impact of Perceived Stress and Coping Adequacy on the Health of Nurses: A Pilot Investigation

    OpenAIRE

    Jordan, Timothy R.; Khubchandani, Jagdish; Wiblishauser, Michael

    2016-01-01

    Stress and coping abilities influence the health and work performance of nurses. However, little is known about the combined influence of stress perception and perceived coping adequacy and its impact on the health of nurses. This study examined the relationship between stress, coping, and the combined influences of perceived stress and coping abilities on health and work performance. A valid and reliable questionnaire was completed by 120 nurses in a Midwestern hospital in the USA. In genera...

  7. Investigation of the influence of wall stiffness on the stress ratio in mammoth silos

    NARCIS (Netherlands)

    van Leeuwenstijn, P.L.L.; van Leeuwenstijn, P.L.L.; van Wijk, L.A.; van Wijk, L.A.; Haaker, G.

    1994-01-01

    To calculate the stresses on the walls of silos, it is necessary to have a good estimate of the ratio of horizontal to vertical stress. This ratio however is not known precisely, especially in cases of static stress as found in a mammoth silo. In this paper the influence of the wall stiffness on the

  8. An investigation of the residual stress characterization and relaxation in peened friction stir welded aluminum-lithium alloy joints

    International Nuclear Information System (INIS)

    Hatamleh, Omar; Rivero, Iris V.; Swain, Shayla E.

    2009-01-01

    In this investigation the residual stresses generated from friction stir welded (FSW) 2195 aluminum-lithium alloy joints were characterized. The results derived from this research revealed significant levels of tensile residual stresses at the surface and throughout the thickness of the FSW samples. Furthermore, residual stress relaxation at the surface and throughout the thickness of the samples was assessed for laser peened friction stir welded aluminum-lithium joints. To do so the samples were cycled several times at a constant amplitude load. The results indicated that most of the relaxation for the surface residual stresses took place during the first cycle of loading. Also, residual stresses relaxation throughout the thickness of the welded region of unpeened samples significantly exceeded the relaxation exhibited by the laser peened samples.

  9. Contacts to semiconductors

    International Nuclear Information System (INIS)

    Tove, P.A.

    1975-08-01

    Contacts to semiconductors play an important role in most semiconductor devices. These devices range from microelectronics to power components, from high-sensitivity light or radiation detectors to light-emitting of microwave-generating components. Silicon is the dominating material but compound semiconductors are increasing in importance. The following survey is an attempt to classify contact properties and the physical mechanisms involved, as well as fabrication methods and methods of investigation. The main interest is in metal-semiconductor type contacts where a few basic concepts are dealt with in some detail. (Auth.)

  10. LANL Contacts

    Science.gov (United States)

    : (505) 665-3664 ethics@lanl.gov Journalist queries Communications Office (505) 667-7000 Media contacts programs and employee resources. General Employee directory Emergency communication Communications Office (505) 667-7000 Ethics & Audits Internal Audit: (505) 665-3104 Ethics Office: (505) 667-7506 Fax

  11. Mother's postnatal stress: an investigation of links to various factors during pregnancy and post-partum.

    Science.gov (United States)

    Andersson, Ewa; Hildingsson, Ingegerd

    2016-12-01

    Higher levels of parental stress have long-term effects on children's health and could lead to dysfunction in the parent-child interaction. Different background factors can be predictors of high parental stress. The aim of this study was to examine parental stress among Swedish women and identify different factors linked to women's parental stress. About 702 women were recruited to a clinical study and followed up six months after birth. Data were collected by two questionnaires, and 279 women completed the Swedish Parental Stress Questionnaire (SPSQ). Less than very good mental health and depressive symptoms after birth were strongly associated with parental stress, and the strongest association was found between post-partum depressive symptoms and high levels of stress in the subscale Incompetence. Multiparity was associated with high stress in two subscales, and lower level of education was a protective factor for stress in nearly all subscales. Depressive symptoms and perceived poor mental health post-partum are the most important factors related to high parental stress. The results point to the importance of identifying and supporting mothers with depressive symptoms, since these women have both mental illness and increased stress. © 2015 Nordic College of Caring Science.

  12. Microstructural investigation of vintage pipeline steels highly susceptible to stress corrosion cracking

    Science.gov (United States)

    Torres, Monica

    The use of pipelines for the transmission of gas offers not only efficiency, but a number of economic advantages. Nevertheless, pipelines are subject to aggressive operating conditions and environments which can lead to in-service degradation [1] and thus to failures. These failures can have catastrophic consequences, such as environmental damage and loss of life [2]. One of the most dangerous threats to pipeline integrity is stress corrosion cracking (SCC). Despite the substantial progress that has been achieved in the field, due to the complex nature of this phenomenon there is still not a complete understanding of this form of external corrosion. This makes its detection and prevention a challenge and therefore a risk to pipeline integrity, and most importantly, to the safety of the population. SCC cracks are the result of the interaction between a corrosive environment, applied stresses, and a susceptible microstructure. To date, what defines a susceptible microstructure remains ambiguous, as SCC has been observed in a range of steel grades, microstructures, chemical composition, and grain sizes. Therefore, in order to be able to accurately predict and prevent this hazardous form of corrosion, it is imperative to advance our knowledge on the subject and gain a better understanding on the microstructural features of highly susceptible pipeline materials, especially in the subsurface zone where crack nucleation must take place. Therefore, a microstructural characterization of the region near the surface layer was carried-out utilizing TEM. TEM analysis revealed the dislocation character, ferrite morphology, and apparent carbide precipitation in some grain boundaries. Furthermore, light microscopy, SEM, and hardness testing were performed to expand our knowledge on the microscopical features of highly SCC susceptible service components. This investigation presents a new approach to SCC characterization, which exposed the sub-surface region microscopical

  13. Investigation on oxidative stress of nitric oxide synthase interacting protein from Clonorchis sinensis.

    Science.gov (United States)

    Bian, Meng; Xu, Qingxia; Xu, Yanquan; Li, Shan; Wang, Xiaoyun; Sheng, Jiahe; Wu, Zhongdao; Huang, Yan; Yu, Xinbing

    2016-01-01

    Numerous evidences indicate that excretory-secretory products (ESPs) from liver flukes trigger the generation of free radicals that are associated with the initial pathophysiological responses in host cells. In this study, we first constructed a Clonorchis sinensis (C. sinensis, Cs)-infected BALB/c mouse model and examined relative results respectively at 3, 5, 7, and 9 weeks postinfection (p.i.). Quantitative reverse transcription (RT)-PCR indicated that the transcriptional level of both endothelial nitric oxide synthase (eNOS) and superoxide dismutase (SOD) gradually decreased with lastingness of infection, while the transcriptional level of inducible NOS (iNOS) significantly increased. The level of malondialdehyde (MDA) in sera of infected mouse significantly increased versus the healthy control group. These results showed that the liver of C. sinensis-infected mouse was in a state with elevated levels of oxidation stress. Previously, C. sinensis NOS interacting protein coding gene (named CsNOSIP) has been isolated and recombinant CsNOSIP (rCsNOSIP) has been expressed in Escherichia coli, which has been confirmed to be a component present in CsESPs and confirmed to play important roles in immune regulation of the host. In the present paper, we investigated the effects of rCsNOSIP on the lipopolysaccharide (LPS)-induced activated RAW264.7, a murine macrophage cell line. We found that endotoxin-free rCsNOSIP significantly promoted the levels of nitric oxide (NO) and reactive oxygen species (ROS) after pretreated with rCsNOSIP, while the level of SOD decreased. Furthermore, rCsNOSIP could also increase the level of lipid peroxidation MDA. Taken together, these results suggested that CsNOSIP was a key molecule which was involved in the production of nitric oxide (NO) and its reactive intermediates, and played an important role in oxidative stress during C. sinensis infection.

  14. Investigation of a Spinel-forming Cu-Mn Foam as an Oxygen Electrode Contact Material in a Solid Oxide Cell Single Repeating Unit

    DEFF Research Database (Denmark)

    Zielke, Philipp; Wulff, Anders Christian; Sun, Xiufu

    2017-01-01

    A critical issue in state-of-the-art solid oxide cell stacks is the contacting of the oxygen electrode. The commonly used ceramic contact layers are applied in a green state and cannot be sintered properly, due to compliance limitations arising from other stack components like sealing glasses...

  15. Can Caring Create Prejudice? An Investigation of Positive and Negative Intergenerational Contact in Care Settings and the Generalisation of Blatant and Subtle Age Prejudice to Other Older People.

    Science.gov (United States)

    Drury, Lisbeth; Abrams, Dominic; Swift, Hannah J; Lamont, Ruth A; Gerocova, Katarina

    2017-01-01

    Caring is a positive social act, but can it result in negative attitudes towards those cared for, and towards others from their wider social group? Based on intergroup contact theory, we tested whether care workers' (CWs) positive and negative contact with old-age care home residents (CHRs) predicts prejudiced attitudes towards that group, and whether this generalises to other older people. Fifty-six CWs were surveyed about their positive and negative contact with CHRs and their blatant and subtle attitudes (humanness attributions) towards CHRs and older adults. We tested indirect paths from contact with CHRs to attitudes towards older adults via attitudes towards CHRs. Results showed that neither positive nor negative contact generalised blatant ageism. However, the effect of negative, but not positive, contact on the denial of humanness to CHRs generalised to subtle ageism towards older adults. This evidence has practical implications for management of CWs' work experiences and theoretical implications, suggesting that negative contact with a subgroup generalises the attribution of humanness to superordinate groups. Because it is difficult to identify and challenge subtle prejudices such as dehumanisation, it may be especially important to reduce negative contact. © 2016 The Authors. Journal of Community & Applied Social Psychology Published by John Wiley & Sons Ltd.

  16. The Impact of Perceived Stress and Coping Adequacy on the Health of Nurses: A Pilot Investigation

    Directory of Open Access Journals (Sweden)

    Timothy R. Jordan

    2016-01-01

    Full Text Available Stress and coping abilities influence the health and work performance of nurses. However, little is known about the combined influence of stress perception and perceived coping adequacy and its impact on the health of nurses. This study examined the relationship between stress, coping, and the combined influences of perceived stress and coping abilities on health and work performance. A valid and reliable questionnaire was completed by 120 nurses in a Midwestern hospital in the USA. In general, the nurses were not healthy: 92% had moderate-to-very high stress levels; 78% slept less than 8 hours of sleep per night; 69% did not exercise regularly; 63% consumed less than 5 servings of fruits and vegetables per day; and 22% were classified as binge drinkers. When confronted with workplace stress, 70% of nurses reported that they consumed more junk food and 63% reported that they consumed more food than usual as a way of coping. Nurses in the “high stress/poor coping” group had the poorest health outcomes and highest health risk behaviors compared to those in other groups. The combined variables of perceived stress and perceived coping adequacy influenced the health of nurses. Therefore, worksite health promotion programs for nurses should focus equally on stress reduction, stress management, and the development of healthy coping skills.

  17. Experimental Investigation of the Influence of Confining Stress on Hard Rock Fragmentation Using a Conical Pick

    Science.gov (United States)

    Li, Xibing; Wang, Shaofeng; Wang, Shanyong

    2018-01-01

    High geostress is a prominent condition in deep excavations and affects the cuttability of deep hard rock. This study aims to determine the influence of confining stress on hard rock fragmentation as applied by a conical pick. Using a true triaxial test apparatus, static and coupled static and dynamic loadings from pick forces were applied to end faces of cubic rock specimens to break them under biaxial, uniaxial and stress-free confining stress conditions. The cuttability indices (peak pick force, insertion depth and disturbance duration), failure patterns and fragment sizes were measured and compared to estimate the effects of confining stress. The results show that the rock cuttabilities decreased in order from rock breakages under stress-free conditions to uniaxial confining stress and then to biaxial confining stress. Under biaxial confining stress, only flake-shaped fragments were stripped from the rock surfaces under the requirements of large pick forces or disturbance durations. As the level of uniaxial confining stress increased, the peak pick force and the insertion depth initially increased and then decreased, and the failure patterns varied from splitting to partial splitting and then to rock bursts with decreasing average fragment sizes. Rock bursts will occur under elastic compression via ultra-high uniaxial confining stresses. There are two critical uniaxial confining stress levels, namely stress values at which peak pick forces begin to decrease and improve rock cuttability, and those at which rock bursts initially occur and cutting safety decreases. In particular, hard rock is easiest to split safely and efficiently under stress-free conditions. Moreover, coupled static preloading and dynamic disturbance can increase the efficiency of rock fragmentation with increasing preloading levels and disturbance amplitudes. The concluding remarks confirm hard rock cuttability using conical pick, which can improve the applicability of mechanical excavation in

  18. An investigation of the adhesion of gold contacts on silicon detectors of nuclear radiation as a function of the substrate temperature

    International Nuclear Information System (INIS)

    Gumnerova, L.; Mikhajlov, M.

    1981-01-01

    The dependence of the adhesion of a thin gold film to an etched single crystal silicon substrate temperature and duration of aging is investigated. N-type silicon samples of 3Ω/m specific resistivity and 0.002 m thick are used. These samples are lapped by a series of abrasive powders with a grain diameter of 40 μm to 7 μm and etched by a 1:3:0.5 (HF:HNO 3 :CH 3 COOH) etching agent. The principal schemes of the evaporation equipment and the adhesion testing device are presented. Gold contacts are deposited at substrate temperature ranging from room temperature up to 433 K. The obtained gold films on the silicon substrates are tested and the results are given. It is seen that the adhesion of the gold film to the sample heated up to 373 K is about 50 times higher than the adhesion of the fresh unheated sample. The comparison between samples subjected to aging shows that the adhesion of heated samples is about 10 times higher and does not change essentially after ageing. Some possible explanations of this phenomena are given

  19. Investigation of spinal cerebrospinal fluid-contacting neurons expressing PKD2L1: evidence for a conserved system from fish to primates

    Science.gov (United States)

    Djenoune, Lydia; Khabou, Hanen; Joubert, Fanny; Quan, Feng B.; Nunes Figueiredo, Sophie; Bodineau, Laurence; Del Bene, Filippo; Burcklé, Céline; Tostivint, Hervé; Wyart, Claire

    2014-01-01

    Over 90 years ago, Kolmer and Agduhr identified spinal cerebrospinal fluid-contacting neurons (CSF-cNs) based on their morphology and location within the spinal cord. In more than 200 vertebrate species, they observed ciliated neurons around the central canal that extended a brush of microvilli into the cerebrospinal fluid (CSF). Although their morphology is suggestive of a primitive sensory cell, their function within the vertebrate spinal cord remains unknown. The identification of specific molecular markers for these neurons in vertebrates would benefit the investigation of their physiological roles. PKD2L1, a transient receptor potential channel that could play a role as a sensory receptor, has been found in cells contacting the central canal in mouse. In this study, we demonstrate that PKD2L1 is a specific marker for CSF-cNs in the spinal cord of mouse (Mus musculus), macaque (Macaca fascicularis) and zebrafish (Danio rerio). In these species, the somata of spinal PKD2L1+ CSF-cNs were located below or within the ependymal layer and extended an apical bulbous extension into the central canal. We found GABAergic PKD2L1-expressing CSF-cNs in all three species. We took advantage of the zebrafish embryo for its transparency and rapid development to identify the progenitor domains from which pkd2l1+ CSF-cNs originate. pkd2l1+ CSF-cNs were all GABAergic and organized in two rows—one ventral and one dorsal to the central canal. Their location and marker expression is consistent with previously described Kolmer–Agduhr cells. Accordingly, pkd2l1+ CSF-cNs were derived from the progenitor domains p3 and pMN defined by the expression of nkx2.2a and olig2 transcription factors, respectively. Altogether our results suggest that a system of CSF-cNs expressing the PKD2L1 channel is conserved in the spinal cord across bony vertebrate species. PMID:24834029

  20. Investigation of spinal cerebrospinal fluid-contacting neurons expressing PKD2L1: evidence for a conserved system from fish to primates

    Directory of Open Access Journals (Sweden)

    Lydia eDjenoune

    2014-05-01

    Full Text Available Over ninety years ago, Kolmer and Agduhr identified spinal cerebrospinal fluid-contacting neurons (CSF-cNs based on their morphology and location within the spinal cord. In more than two hundred vertebrate species, they observed ciliated neurons around the central canal that extended a brush of microvilli into the cerebrospinal fluid (CSF. Although their morphology is suggestive of a primitive sensory cell, their function within the vertebrate spinal cord remains unknown. The identification of specific molecular markers for these neurons in vertebrates would benefit the investigation of their physiological roles. PKD2L1, a transient receptor potential channel that could play a role as a sensory receptor, has been found in cells contacting the central canal in mouse. In this study, we demonstrate that PKD2L1 is a specific marker for CSF-cNs in the spinal cord of mouse (Mus musculus, macaque (Macaca fascicularis and zebrafish (Danio rerio. In these species, the somata of spinal PKD2L1+ CSF-cNs were located below or within the ependymal layer and extended an apical bulbous extension into the central canal. We found GABAergic PKD2L1-expressing CSF-cNs in all three species. We took advantage of the zebrafish embryo for its transparency and rapid development to identify the progenitor domains from which pkd2l1+ CSF-cNs originate. pkd2l1+ CSF-cNs were all GABAergic and organized in two rows—one ventral and one dorsal to the central canal. Their location and marker expression is consistent with previously described Kolmer-Agduhr cells. Accordingly, pkd2l1+ CSF-cNs were derived from the progenitor domains p3 and pMN defined by the expression of nkx2.2a and olig2 transcription factors, respectively. Altogether our results suggest that a system of CSF-cNs expressing the PKD2L1 channel is conserved in the spinal cord across bony vertebrate species.

  1. Investigation into the effects of using two or four acupuncture needles with bidirectional rotation on experimentally-induced contact heat pain in healthy subjects.

    Science.gov (United States)

    Paley, Carole A; Johnson, Mark I

    2015-02-01

    There is growing evidence from experimental studies that the acupuncture dose or technique influences the speed of onset of hypoalgesia. The aim of this study was to investigate the effects of acupuncture using two or four needles on experimental contact thermal pain in healthy volunteers. Forty two participants were randomised into three groups: four-needle group (LI4, LI11, LI10, TE5), two-needle group (verum at LI4, LI11 and mock at LI10, TE5) and mock acupuncture group (LI4, LI11, LI10, TE5). Each participant rated pain intensity (visual analogue scale, VAS) to a series of noxious stimuli administered to the forearm 2°C above the heat pain threshold during needling and immediately after removal of the needles. Experimentally-induced heat pain intensity (VAS) during and after the intervention was lower than pre-intervention but there were no statistically significant differences in this change between groups. There were no statistically significant differences between groups in the time taken for pain intensity to decrease by 33% from pre-intervention. However, a 33% decrease in pain intensity within 3 min of needle insertion was observed for 13 participants (92.9%) in the four-needle group compared with 66.7% of participants in the two-needle group and 57.1% in the mock acupuncture group. There was less variance in VAS in the four-needle group, suggesting more consistency in hypoalgesic response when using more needles. There is tentative evidence that four needles may be superior to two needles in generating rapid onset hypoalgesia. The findings suggest that further investigation is warranted. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  2. Investigations in thermal fields and stress fields induced by electron beam welding

    International Nuclear Information System (INIS)

    Basile, G.

    1979-12-01

    This document presents the thermal study of electron beam welding and identifies stresses and strains from welding: description of the operating principles of the electron gun and characterization of various welding parameters, examination of the temperature fields during electron beam welding development of various mathematic models and comparison with experimental results, measurement and calculation of stresses and strains in the medium plane of the welding assembly, residual stresses analysis [fr

  3. Preclinical stress research: where are we headed? An early career investigator's perspective.

    Science.gov (United States)

    Gururajan, Anand; Kos, Aron; Lopez, Juan Pablo

    2018-03-07

    Stress is a major risk factor in the development of various psychiatric disorders such as depression, anxiety and post-traumatic stress disorder. The use of stress paradigms in preclinical contexts is essential to advance our understanding of the pathophysiology of these disorders. However, they are not without their limitations and in this commentary, we have examined some of the practical issues associated with their use. We also highlight some of the latest techniques to identify their neuromolecular correlates as well as the potentially important and integrative role of computational neuroscience. Finally, we share our perspective on future directions in the field of preclinical stress research.

  4. Photoelastic investigation of the stresses in mitred bent cylinders under bending, (1)

    International Nuclear Information System (INIS)

    Sawa, Yoshiaki

    1982-01-01

    Recently large bore pipes have been frequently used, and the techniques of jointing such pipes are important technical problem. As for the actual design of pipe joints, the stress condition has not been sufficiently clarified. When two same diameter pipes are jointed making a certain angle, mitred bent pipes are often used from economical and technical viewpoints as the pipes become large bore. In a mitred bent pipe, there is a sharp edge in its pipe joint, at which the measurement of stress and strain is difficult. The stress distribution near the joint when a mitred bent pipe is subjected to the bending moment in the plane containing the axes of both pipes was analyzed by the freezing three-dimensional photo-elastic method, and not only the bending stress in the joint but also the hoop stress were determined by the wedge method. This stress concentration phenomenon is due to the whole structural factor of the intersection of two pipes and the local stress peak factor caused at the wedge-shaped edge formed in the intersection. The local form of the intersection plays important role in the stress concentration. The manufactured models, the method of loading, slices and the wedge method, and the stress distribution are reported. (Kako, I.)

  5. Poly(3-hydroxybutyrate production in an integrated electromicrobial setup: Investigation under stress-inducing conditions.

    Directory of Open Access Journals (Sweden)

    Israa Salem Al Rowaihi

    Full Text Available Poly(3-hydroxybutyrate (PHB, a biodegradable polymer, can be produced by different microorganisms. The PHB belongs to the family of polyhydroxyalkanoate (PHA that mostly accumulates as a granule in the cytoplasm of microorganisms to store carbon and energy. In this study, we established an integrated one-pot electromicrobial setup in which carbon dioxide is reduced to formate electrochemically, followed by sequential microbial conversion into PHB, using the two model strains, Methylobacterium extorquens AM1 and Cupriavidus necator H16. This setup allows to investigate the influence of different stress conditions, such as coexisting electrolysis, relatively high salinity, nutrient limitation, and starvation, on the production of PHB. The overall PHB production efficiency was analyzed in reasonably short reaction cycles typically as short as 8 h. As a result, the PHB formation was detected with C. necator H16 as a biocatalyst only when the electrolysis was operated in the same solution. The specificity of the source of PHB production is discussed, such as salinity, electricity, concurrent hydrogen production, and the possible involvement of reactive oxygen species (ROS.

  6. Poly(3-hydroxybutyrate) production in an integrated electromicrobial setup: Investigation under stress-inducing conditions

    Science.gov (United States)

    Al Rowaihi, Israa Salem; Paillier, Alexis; Rasul, Shahid; Karan, Ram; Grötzinger, Stefan Wolfgang; Eppinger, Jörg

    2018-01-01

    Poly(3-hydroxybutyrate) (PHB), a biodegradable polymer, can be produced by different microorganisms. The PHB belongs to the family of polyhydroxyalkanoate (PHA) that mostly accumulates as a granule in the cytoplasm of microorganisms to store carbon and energy. In this study, we established an integrated one-pot electromicrobial setup in which carbon dioxide is reduced to formate electrochemically, followed by sequential microbial conversion into PHB, using the two model strains, Methylobacterium extorquens AM1 and Cupriavidus necator H16. This setup allows to investigate the influence of different stress conditions, such as coexisting electrolysis, relatively high salinity, nutrient limitation, and starvation, on the production of PHB. The overall PHB production efficiency was analyzed in reasonably short reaction cycles typically as short as 8 h. As a result, the PHB formation was detected with C. necator H16 as a biocatalyst only when the electrolysis was operated in the same solution. The specificity of the source of PHB production is discussed, such as salinity, electricity, concurrent hydrogen production, and the possible involvement of reactive oxygen species (ROS). PMID:29698424

  7. Poly(3-hydroxybutyrate) production in an integrated electromicrobial setup: Investigation under stress-inducing conditions

    KAUST Repository

    Al Rowaihi, Israa Salem

    2018-04-26

    Poly(3-hydroxybutyrate) (PHB), a biodegradable polymer, can be produced by different microorganisms. The PHB belongs to the family of polyhydroxyalkanoate (PHA) that mostly accumulates as a granule in the cytoplasm of microorganisms to store carbon and energy. In this study, we established an integrated one-pot electromicrobial setup in which carbon dioxide is reduced to formate electrochemically, followed by sequential microbial conversion into PHB, using the two model strains, Methylobacterium extorquens AM1 and Cupriavidus necator H16. This setup allows to investigate the influence of different stress conditions, such as coexisting electrolysis, relatively high salinity, nutrient limitation, and starvation, on the production of PHB. The overall PHB production efficiency was analyzed in reasonably short reaction cycles typically as short as 8 h. As a result, the PHB formation was detected with C. necator H16 as a biocatalyst only when the electrolysis was operated in the same solution. The specificity of the source of PHB production is discussed, such as salinity, electricity, concurrent hydrogen production, and the possible involvement of reactive oxygen species (ROS).

  8. Stress

    DEFF Research Database (Denmark)

    Keller, Hanne Dauer

    2015-01-01

    Kapitlet handler om stress som følelse, og det trækker primært på de få kvalitative undersøgelser, der er lavet af stressforløb.......Kapitlet handler om stress som følelse, og det trækker primært på de få kvalitative undersøgelser, der er lavet af stressforløb....

  9. Stress !!!

    OpenAIRE

    Fledderus, M.

    2012-01-01

    Twee op de vijf UT-studenten hebben last van ernstige studiestress, zo erg zelfs dat het ze in hun privéleven belemmert. Die cijfers komen overeen met het landelijk beeld van stress onder studenten. Samen met 14 andere universiteits- en hogeschoolbladen enquêteerde UT Nieuws bijna 5500 studenten. Opvallend is dat mannelijke studenten uit Twente zich veel minder druk lijken te maken over hun studie. Onder vrouwen ligt de stress juist erg hoog ten opzichte van het landelijk gemiddelde.

  10. Psychological stress in hydro workers of the 1998 ice storm : a longitudinal investigation (Quebec)

    Energy Technology Data Exchange (ETDEWEB)

    Benzimra, Y.

    2003-07-01

    This thesis examined occupational stress in terms of the stressful transactions that take place between workers and their workplace. In particular, it documented some of the experiences of hydro workers during the ice storm of 1998 which hit eastern Canada. In addition to identifying stressors, this study assessed the worker's levels of psychological stress and distress 5 and 10 months following the storm. It also examined differences in psychological stress and distress levels between workers with different levels of exposure to the storm. The added contribution of appraised extra-organization stressors to the prediction of psychological stress was also assessed along with the added contribution of extra-organizational sources of support to the prediction of psychological stress. The objective was to test an integrative model of workplace stress and overall distress to better understand the relationship between psychological stress and distress levels over time. Two phases of data, 5 months apart, were collected from full-time employees of Hydro-Quebec, including both men and women who filled out questionnaires about perceived social support and other indicators of overall stress. The results revealed different experiences of the recovery effort workers during and after the ice storm. The experiences of different groups of workers varied depending on the type and degree of involvement in the recovery efforts from the storm. The results emphasized the importance of considering appraised organization stressors when predicting psychological stress. The study revealed that psychological stress 5 months following the ice storm did not add significantly to the prediction of psychological distress 5 months later, once the contribution of psychological distress at the first phase was accounted for.

  11. Stress-Preventive Management Competencies, Psychosocial Work Environments, and Affective Well-Being: A Multilevel, Multisource Investigation

    Science.gov (United States)

    Balducci, Cristian

    2018-01-01

    The Management Competencies for Preventing and Reducing Stress at Work framework represents one of the few tailored models of leadership for work stress prevention purposes, but it has never been empirically evaluated. The aim of this study was to investigate whether supervisors’ stress-preventive management competencies, as measured by the Stress Management Competencies Indicator Tool (SMCIT), are related to employees’ affective well-being through psychosocial work environmental factors. To this end, multilevel structural equation modelling (MSEM) was developed and tested, including data provided by both supervisors and employees. Supervisors (n = 84) self-assessed their stress-preventive management competencies (i.e., being respectful and responsible, managing and communicating existing and future work, reasoning and managing difficult situations, and managing the individual within the team) with a previously validated reduced version of the SMCIT. The supervised employees (n = 584) rated job content (e.g., job demands) and work context (e.g., role clarity) psychosocial factors and their job-related affective well-being. Supervisors’ job-related affective well-being was also included in the tested model. The results revealed that the stress-preventive competencies factor was related to employees’ affective well-being through the psychosocial work environment only when the latter was operationalized by means of contextual work factors. Supervisors’ affective well-being was related to their stress-preventive competencies, but it was not related to employees’ affective well-being. We discuss the implications of the results obtained. PMID:29495360

  12. Stress-Preventive Management Competencies, Psychosocial Work Environments, and Affective Well-Being: A Multilevel, Multisource Investigation.

    Science.gov (United States)

    Toderi, Stefano; Balducci, Cristian

    2018-02-26

    The Management Competencies for Preventing and Reducing Stress at Work framework represents one of the few tailored models of leadership for work stress prevention purposes, but it has never been empirically evaluated. The aim of this study was to investigate whether supervisors' stress-preventive management competencies, as measured by the Stress Management Competencies Indicator Tool (SMCIT), are related to employees' affective well-being through psychosocial work environmental factors. To this end, multilevel structural equation modelling (MSEM) was developed and tested, including data provided by both supervisors and employees. Supervisors ( n = 84) self-assessed their stress-preventive management competencies (i.e., being respectful and responsible, managing and communicating existing and future work, reasoning and managing difficult situations, and managing the individual within the team) with a previously validated reduced version of the SMCIT. The supervised employees ( n = 584) rated job content (e.g., job demands) and work context (e.g., role clarity) psychosocial factors and their job-related affective well-being. Supervisors' job-related affective well-being was also included in the tested model. The results revealed that the stress-preventive competencies factor was related to employees' affective well-being through the psychosocial work environment only when the latter was operationalized by means of contextual work factors. Supervisors' affective well-being was related to their stress-preventive competencies, but it was not related to employees' affective well-being. We discuss the implications of the results obtained.

  13. Research on the mechanism of inhibition of stress corrosion cracking by water chemistry of nuclear reactor. JAERI's nuclear research promotion program, H10-004 (contact research)

    International Nuclear Information System (INIS)

    Shibata, Toshio; Haruna, Takumi; Fujimoto, Shinji; Zhang, Shenghan

    2000-09-01

    We have developed a slow strain rate testing apparatus combined with a CCD camera system for researching stress corrosion cracking of the materials in high temperature and high pressure water, like nuclear reactor environment. The features of the tensile testing apparatus are the following; pressure up to 100 kg/cm 2 , temperature up to 300degC, and cross head speed down to 10 -5 mm/min. In addition, initiation and propagation of the multiple crack appearing on the material surface in the water at high pressure and high temperature can be clearly observed through a sapphire window penetrating an autoclave. Using the apparatus, we investigated the effects of temperature and species of anion, SO 4 2- and B 4 O 7 2- on the crack initiation and propagation of sensitized 304 stainless steel. The following were revealed: in the sulfate solutions, crack initiation time decreased with increase in temperature from 100 to 250degC, while crack initiation frequency showed maximum at 150degC. In the borate solutions, however, no crack was found on the gauge section of the specimen at any temperatures. This indicates the borate can suppress the initiation of cracks. The effect of anion on the crack initiation may be explained by hardness of anion based on the hard and soft acids and bases concept and the passive film model. (author)

  14. A longitudinal investigation of parenting stress in caregivers of children with retinoblastoma.

    Science.gov (United States)

    Willard, Victoria W; Qaddoumi, Ibrahim; Zhang, Hui; Huang, Lu; Russell, Kathryn M; Brennan, Rachel; Wilson, Matthew W; Rodriguez-Galindo, Carlos; Phipps, Sean

    2017-04-01

    Retinoblastoma is typically diagnosed in young children and may present unique parenting challenges. Qualitative research suggests that parents experience distress related to the initial diagnosis and treatment that subsequently resolves. The objectives were to systematically assess parenting stress over time in parents of young children with retinoblastoma and to examine associations between parenting stress and child outcomes. Parents of children with retinoblastoma completed the Parenting Stress Index (PSI) during serial psychological assessments scheduled based on the child's age (6 months to 5 years). Caregivers of 92 patients (85.9% mothers) completed the assessments. Child outcomes included developmental functioning and parent-reported adaptive functioning. At baseline and age 5, all subscales on the PSI were within normal limits, and most were significantly below normative means (i.e., demonstrating low levels of stress). All domains remained relatively stable over time. Associations between parenting stress and child outcomes were much stronger at age 5 than at baseline. Child-directed parenting stress was a small but significant contributor to declines in child functioning over time. Parents of children with retinoblastoma report normal levels of parenting stress while their children are young. However, baseline parenting stress appears to contribute to changes in child functioning over time. Future studies should assess illness-related aspects of adjustment to further understand the parenting experience of young children with cancer and/or having a visually impaired child. © 2016 Wiley Periodicals, Inc.

  15. Preliminary Investigation of a Stress Prevention and Mindfulness Group for Teachers

    Science.gov (United States)

    Reiser, Jenson E.; McCarthy, Christopher J.

    2018-01-01

    This exploratory study evaluated a short-term (6-8 weeks) psychoeducation and support group for teachers focused on stress prevention and mindfulness (labeled SPAM group). A total of 4 groups were implemented in different schools, and evaluation was conducted with quantitative (pre- and post-measures of teacher vulnerability to stress, job…

  16. Investigating the Relationship between Educational Stress and Emotional Self-Efficacy

    Science.gov (United States)

    Arslan, Nihan

    2017-01-01

    The objective of study is the underlying to relationship between emotional self-efficacy and educational stress with a structural equation model. The research was conducted on 232 secondary school students. Emotional self-efficacy scale and educational stress scale were used in the study. It was found that there was a negative correlation between…

  17. Photoelastic investigation of the stresses in mitered bent-cylinders under bending, 2

    International Nuclear Information System (INIS)

    Sawa, Yoshiaki

    1983-01-01

    The results of the stress analysis near the joints by freezing photoelastic method are described when two mitered cylinders of same diameter were directly joined, and the joint was subjected to inplane bending. The intersecting angle was changed from 45 deg through 60 and 90 deg to 120 deg, and the change of the stress distribution was examined, and the relation of the axial and circumferential peak stress values to the intersecting angle, wall thickness and corner radius was determined. In the experiment changing the intersecting angle, mostly the wall thickness and corner radius were taken as 1/10 of cylinder outside diameter. The models were made of Araldite B type and by machining and filing. In order to apply pure bending moment, four-point loading method was adopted. The photoelastic pictures, the state of stress distribution and the change of stress concentration factor due to the change of the intersecting angle are reported. The stress concentration factor was relatively high, and in particular, that of axial stress at the corner was remarkably affected by the corner radius. Other points of high peak stress were found. (Kako, I.)

  18. Investigation of Techno-Stress Levels of Teachers Who Were Included in Technology Integration Processes

    Science.gov (United States)

    Çoklar, Ahmet Naci; Efilti, Erkan; Sahin, Yusef Levent; Akçay, Arif

    2016-01-01

    Techno-stress is defined as a modern adaptation disorder resulting from the failure in coping with new technologies in a healthy way. Techno-stress affects many occupational groups, including teachers. FATIH project and many other previous studies conducted in Turkey in recent years have necessitated the use of technology for teachers. The present…

  19. Computational and experimental investigation of local stress fiber orientation in uniaxially and biaxially constrained microtissues

    NARCIS (Netherlands)

    Obbink - Huizer, C.; Foolen, J.; Oomens, C.W.J.; Borochin, M.A.; Chen, C.S.; Bouten, C.V.C.; Baaijens, F.P.T.

    2014-01-01

    The orientation of cells and associated F-actin stress fibers is essential for proper tissue functioning. We have previously developed a computational model that qualitatively describes stress fiber orientation in response to a range of mechanical stimuli. In this paper, the aim is to quantitatively

  20. Aroma Effects on Physiologic and Cognitive Function Following Acute Stress: A Mechanism Investigation

    OpenAIRE

    Chamine, Irina; Oken, Barry S.

    2016-01-01

    Objective: Aromas may improve physiologic and cognitive function after stress, but associated mechanisms remain unknown. This study evaluated the effects of lavender aroma, which is commonly used for stress reduction, on physiologic and cognitive functions. The contribution of pharmacologic, hedonic, and expectancy-related mechanisms of the aromatherapy effects was evaluated.

  1. Sources of Stress among Parents of Children with Intellectual Disabilities: A Preliminary Investigation in Saudi Arabia

    Science.gov (United States)

    Aldosari, Mubarak S.; Pufpaff, Lisa A.

    2014-01-01

    This study identified differences in sources of stress between parents of male children with intellectual disabilities in Saudi Arabia. Seventeen pairs of parents completed the Parent Stress Index (Abidin, 1995). Each pair of parents had a male child diagnosed with intellectual disability who either attended an institute for male children with…

  2. Use of the RoboFlag synthetic task environment to investigate workload and stress responses in UAV operation.

    Science.gov (United States)

    Guznov, Svyatoslav; Matthews, Gerald; Funke, Gregory; Dukes, Allen

    2011-09-01

    Use of unmanned aerial vehicles (UAVs) is an increasingly important element of military missions. However, controlling UAVs may impose high stress and workload on the operator. This study evaluated the use of the RoboFlag simulated environment as a means for profiling multiple dimensions of stress and workload response to a task requiring control of multiple vehicles (robots). It tested the effects of two workload manipulations, environmental uncertainty (i.e., UAV's visual view area) and maneuverability, in 64 participants. The findings confirmed that the task produced substantial workload and elevated distress. Dissociations between the stress and performance effects of the manipulations confirmed the utility of a multivariate approach to assessment. Contrary to expectations, distress and some aspects of workload were highest in the low-uncertainty condition, suggesting that overload of information may be an issue for UAV interface designers. The strengths and limitations of RoboFlag as a methodology for investigating stress and workload responses are discussed.

  3. Investigating the effect of work stress, general health quality, organizational intelligence and job satisfaction on employee performance

    Directory of Open Access Journals (Sweden)

    Masoud Samadzadeh

    2013-12-01

    Full Text Available During the past few years, there have been tremendous efforts on measuring the effects of different factors such as work stress, general heath quality, etc. on performance of employees. In this paper, we present an empirical investigation to study the effects of work stress, general health, organizational intelligence and job satisfaction on employee performance. The proposed study of this paper uses two questionnaires where one is associated with general heath quality (GHQ with 20 questions and the other one consists of 12 questions, which is associated with work stress. The study chooses a sample of 144 employees from 222 people who worked for one of Islamic Azad University in Iran. Cronbach alphas for work stress, general health, organizational intelligence, job satisfaction and organizational performance are 0.911, 0.895, 0.795, 0.863 and, 0.864, respectively. The results indicate that job satisfaction has the highest influence on organizational performance followed by other factors.

  4. Investigation of the Residual Stress State in an Epoxy Based Specimen

    DEFF Research Database (Denmark)

    Baran, Ismet; Jakobsen, Johnny; Andreasen, Jens Henrik

    2015-01-01

    Abstract. Process induced residual stresses may play an important role under service loading conditions for fiber reinforced composite. They may initiate premature cracks and alter the internal stress level. Therefore, the developed numerical models have to be validated with the experimental...... observations. In the present work, the formation of the residual stresses/strains are captured from experimental measurements and numerical models. An epoxy/steel based sample configuration is considered which creates an in-plane biaxial stress state during curing of the resin. A hole drilling process...... material models, i.e. cure kinetics, elastic modulus, CTE, chemical shrinkage, etc. together with the drilling process using the finite element method. The measured and predicted in-plane residual strain states are compared for the epoxy/metal biaxial stress specimen....

  5. Investigation of displacement, strain and stress in single step transversely isotropic elastic bonded joint

    Science.gov (United States)

    Apu, Md. Jakaria; Islam, Md. Shahidul

    2016-07-01

    Bi-material joint is often used in many advanced materials and structures. Determination of the bonding strength at the interface is very difficult because of the presence of the stress singularity. In this paper, the displacement and stress fields of a transversely isotropic bi-material joint around an interface edge are determined. Autodesk Simulation Mechanical 2015 is used to carry out the numerical computations. Stress and displacement fields demonstrate that the values near the edge of joint where the stress singularity occurs are larger than that at the inner portion. From the numerical results, it is suggested that de-bonding of the interface may occur at the interface edge of the joint due to the higher stress concentration at the free edge.

  6. Experimental investigation of quench and re-wetting temperatures of hot horizontal tubes well above the limiting temperature for solid–liquid contact

    Energy Technology Data Exchange (ETDEWEB)

    Takrouri, Kifah, E-mail: takroukj@mcmaster.ca [Department of Engineering Physics, McMaster University, 1280 Main Street West, Hamilton, Ontario L8S 4L7 (Canada); Luxat, John, E-mail: luxatj@mcmaster.ca [Department of Engineering Physics, McMaster University, 1280 Main Street West, Hamilton, Ontario L8S 4L7 (Canada); Hamed, Mohamed [Thermal Processing Laboratory (TPL), Department of Mechanical Engineering, McMaster University, 1280 Main Street West, Hamilton, Ontario L8S 4L7 (Canada)

    2017-01-15

    Highlights: • Quench and re-wetting temperatures were measured upon jet quenching of hot cylindrical tubes. • Correlations have been developed and provided good fit of data. • Quench and re-wetting temperatures were found to greatly depend on water subcooling. • Stagnation point showed higher quench and re-wetting temperatures than other locations. • Quench temperature decreased by increasing surface curvature and tube conductivity. • Re-wetting temperature is a weak function of both variables. - Abstract: Quench cooling of a hot dry surface involves the rapid decrease in surface temperature resulting from bringing the hot surface into sudden contact with a coolant at a lower temperature. Quench temperature is the onset of the rapid decrease in surface temperature and corresponds to the onset of destabilization of a vapor film that exists between the hot surface and the coolant. Situations involving quench cooling are encountered in a number of postulated accidents in Canada Deuterium Uranium CANDU reactors, such as the quench of a hot calandria tube in certain Loss of Coolant Accidents LOCA. If the calandria tube temperature is not reduced by initiation of quench heat transfer, then this may lead to subsequent fuel channel failure and for this accident knowledge of quench heat transfer characteristics is of great importance. In this study, a Water Quench Facility WQF has been designed and built at the Thermal Processing Laboratory TPL at McMaster University and a series of experimental tests were carried out to investigate the quench of hot horizontal tubes using a vertical rectangular water multi-jet system. The tubes were heated to a temperature between 380 and 780 °C then cooled to the jet temperature. The temperature variation with time in tube circumferential and axial directions was measured. The two-phase flow behavior and the propagation of the re-wetting front around and along the tubes were simultaneously observed using a high-speed camera

  7. Solutions of dissimilar material singularity and contact problems

    International Nuclear Information System (INIS)

    Yang, Y.

    2003-09-01

    Due to the mismatch of the material properties of joined components, after a homogeneous temperature change or under a mechanical loading, very high stresses occur near the intersection of the interface and the outer surface, or near the intersection of two interfaces. For most material combinations and joint geometries, there exists even a stress singularity. These high stresses may cause fracture of the joint. The investigation of the stress situation near the singular point, therefore, is of great interest. Especially, the relationship between the singular stress exponent, the material data and joint geometry is important for choosing a suitable material combination and joint geometry. In this work, the singular stress field is described analytically in case of the joint having a real and a complex eigenvalue. Solutions of different singularity problems are given, which are two dissimilar materials joint with free edges; dissimilar materials joint with edge tractions; joint with interface corner; joint with a given displacement at one edge; cracks in dissimilar materials joint; contact problem in dissimilar materials and logarithmic stress singularity. For an arbitrary joint geometry and material combination, the stress singular exponent, the angular function and the regular stress term can be calculated analytically. The stress intensity factors for a finite joint can be determined applying numerical methods, e.g. the finite element method (FEM). The method to determine more than one stress intensity factor is presented. The characteristics of the eigenvalues and the stress intensity factors are shown for different joint conditions. (orig.)

  8. A translational investigation targeting stress-reactivity and prefrontal cognitive control with guanfacine for smoking cessation.

    Science.gov (United States)

    McKee, Sherry A; Potenza, Marc N; Kober, Hedy; Sofuoglu, Mehmet; Arnsten, Amy F T; Picciotto, Marina R; Weinberger, Andrea H; Ashare, Rebecca; Sinha, Rajita

    2015-03-01

    Stress and prefrontal cognitive dysfunction have key roles in driving smoking; however, there are no therapeutics for smoking cessation that attenuate the effects of stress on smoking and enhance cognition. Central noradrenergic pathways are involved in stress-induced reinstatement to nicotine and in the prefrontal executive control of adaptive behaviors. We used a novel translational approach employing a validated laboratory analogue of stress-precipitated smoking, functional magnetic resonance imaging (fMRI), and a proof-of-concept treatment period to evaluate whether the noradrenergic α2a agonist guanfacine (3 mg/day) versus placebo (0 mg/day) reduced stress-precipitated smoking in the laboratory, altered cortico-striatal activation during the Stroop cognitive-control task, and reduced smoking following a quit attempt. In nicotine-deprived smokers (n=33), stress versus a neutral condition significantly decreased the latency to smoke, and increased tobacco craving, ad-libitum smoking, and systolic blood pressure in placebo-treated subjects, and these effects were absent or reduced in guanfacine-treated subjects. Following stress, placebo-treated subjects demonstrated decreased cortisol levels whereas guanfacine-treated subjects demonstrated increased levels. Guanfacine, compared with placebo, altered prefrontal activity during a cognitive-control task, and reduced cigarette use but did not increase complete abstinence during treatment. These preliminary laboratory, neuroimaging, and clinical outcome data were consistent and complementary and support further development of guanfacine for smoking cessation. © The Author(s) 2014.

  9. An investigation of coping strategies associated with job stress in teachers.

    Science.gov (United States)

    Griffith, J; Steptoe, A; Cropley, M

    1999-12-01

    School teaching is regarded as a stressful occupation, but the perception of the job as stressful may be influenced by coping responses and social support. To assess the associations between teacher stress, psychological coping responses and social support, taking into account the plaintive set engendered by negative affectivity. Questionnaire survey of 780 primary and secondary school teachers (53.5% response rate). In stepwise multiple regression, social support at work and the coping responses behavioural disengagement and suppression of competing activities predicted job stress independently of age, gender, class size, occupational grade and negative affectivity. High job stress was associated with low social support at work and greater use of coping by disengagement and suppression of competing activities. It is suggested that behavioural disengagement and suppression of competing activities are maladaptive responses in a teaching environment and may actually contribute to job stress. Coping and social support not only moderate the impact of stressors on well-being but influence the appraisal of environmental demands as stressful.

  10. Investigation of drought stress in pepino (solanum muricatum ait. cv. miskl) leaves

    International Nuclear Information System (INIS)

    Duman, S.; Sivaci, A.

    2015-01-01

    In this study, the effects of drought stress on pepino seedlings (Solanum muricatum cv. Miski) under natural greenhouse conditions were examined. The control plants were watered at field capacity, and the stress group was not watered. Samples were collected on the 6th, 12th, 24th and 36th days from the leaves of S. muricatum seedlings that, were exposed to drought stress. The relative water content, the total phenolic compounds, and the malondialdehyde, total photosynthetic pigments (chlorophyll a, chlorophyll b and carotenoids), and proline contents in these samples were determined. Depending on drought stress, the relative water content, the chlorophyll a, chlorophyll b and carotenoid contents, and the total chlorophylls were found to be lower in the stress group compared with the control group. In contrast, the total phenolic compounds (24th and 36th days) and the proline (12th, 24th and 36th days) levels increased significantly compared with the control group. In addition, a significant increase in the malondialdehyde contents was obtained on the 36th day in the stress group compared with the control group. Such studies may be important for evaluation of metabolic changes in pepino under the drought stress. (author)

  11. An Investigation of Job Stress and Job Burnout in Iranian Clinical Pharmacist

    Directory of Open Access Journals (Sweden)

    Armaghan Eslami

    2016-05-01

    Full Text Available Background: Stress is an important element of organization ineffectiveness and since it leads to sickness, eventually it reduces quality and quantity of health care, lead to expansion of it costs and low job satisfaction. Stress comes along with consequences, one of this reactions which comes along with horrible effects is job burnout. Health care are more exposed for job burnout. We examined the relationship between job stress and job burnout in Iranian clinical pharmacist.Methods: Sample was 50 of men and women of clinical pharmacist. Parker and De cotiis  scale (1983 and Maslach Burnout Inventory (MBI, 1981 were used to asses clinical pharmacist stress and burnout. Data were analyzed by applying regression method.Results: Results indicated that there is strong relationship between stress and burnout and its three dimensions. The result also indicated that stress have the highest impact on emotional exhaustion and the least on the depersonalization.Conclusion: Burnout is a result of stress in human services career. Human service needs are vary from other professions since in these jobs in order to fulfill the clients’ needs, employees should use themselves as the required technology, and in return they do not receive gratitude or appreciation.

  12. Investigating role stress in frontline bank employees: A cluster based approach

    Directory of Open Access Journals (Sweden)

    Arti Devi

    2013-09-01

    Full Text Available An effective role stress management programme would benefit from a segmentation of employees based on their experience of role stressors. This study explores role stressor based segments of frontline bank employees towards providing a framework for designing such a programme. Cluster analysis on a random sample of 501 frontline employees of commercial banks in Jammu and Kashmir (India revealed three distinct segments – “overloaded employees”, “unclear employees”, and “underutilised employees”, based on their experience of role stressors. The findings suggest a customised approach to role stress management, with the role stress management programme designed to address cluster specific needs.

  13. Paper S12 5 : Self-aligned a-IGZO TFTs : Impact of S/D contacts formation on their Negative-Bias-Illumination-Stress (NBIS) instability

    NARCIS (Netherlands)

    Nag, M.; Steudel, S.; Smout, S.; Bhoolokam, A.; Genoe, J.; Cobb, B.; Kumar, A.; Groeseneken, G.; Heremans, P.

    2015-01-01

    In this work, we present the impact of S/D contact formation, that is, by SiN plasma doping (hydrogen incorporation), metallic reduction (by calcium) and by argon plasma (compositional change) on NBIS instabilities of self-aligned a-IGZO TFTs.

  14. Prioritized Contact Transport Stream

    Science.gov (United States)

    Hunt, Walter Lee, Jr. (Inventor)

    2015-01-01

    A detection process, contact recognition process, classification process, and identification process are applied to raw sensor data to produce an identified contact record set containing one or more identified contact records. A prioritization process is applied to the identified contact record set to assign a contact priority to each contact record in the identified contact record set. Data are removed from the contact records in the identified contact record set based on the contact priorities assigned to those contact records. A first contact stream is produced from the resulting contact records. The first contact stream is streamed in a contact transport stream. The contact transport stream may include and stream additional contact streams. The contact transport stream may be varied dynamically over time based on parameters such as available bandwidth, contact priority, presence/absence of contacts, system state, and configuration parameters.

  15. An Investigation of the Combined Effect of Stress, Fatigue and Workload on Human Performance: Position Paper

    Science.gov (United States)

    Mock, Jessica

    2005-01-01

    Stress, fatigue, and workload affect worker performance. NSF reported that 61% of respondents state losing concentration at work while 79% occasionally or frequently made errors as a result of being fatigued. Shift work, altered work schedules, long hours of continuous wakefulness, and sleep loss can create sleep and circadian disruptions that degrade waking fundions causing stress and fatigue. Review of the literature has proven void of information that links the combined effects of fatigue, stress, and workload to human performance. This paper will address which occupational factors within stress, fatigue, and workload were identified as occupational contributors to performance changes. The results of this research will be apglied to underlying models and algorithms that will help predict performance changes in control room operators.

  16. A preliminary investigation of workplace stress in platinum miners using subjective and objective measures

    CSIR Research Space (South Africa)

    Edwards, A

    2011-04-01

    Full Text Available Workplace stress in the mining environment will affect health and safety outcomes in the workforce that could result in accidents and injuries, as well as poorer worker health. Increased knowledge of the specific characteristics and incidence...

  17. Investigation on the effects of geometric variables on the residual stresses and PWSCC growth in the RPV BMI penetration nozzles

    International Nuclear Information System (INIS)

    Kim, Jong Sung; Ra, Myoung Soo; Lee, Kyoung Soo

    2015-01-01

    This study investigated the effects of various geometric variables on the residual stresses and PWSCC growth of RPV BMI penetration nozzles. An FE residual stress analysis procedure was developed and validated from the viewpoint of FFS assessment. The validated FE residual stress analysis procedure and the PWSCC growth assessment procedure in the ASME B and PV Code, Sec.XI were applied to the BMI penetration nozzles with specified ranges of the geometric variables. The total stresses at steady state during normal operation including welding residual stresses increase with increasing inclination angle of the BMI nozzles, and with tilt angle, depth, and root width of the J-groove weld. The lifetime from the assumed initial crack to the acceptance criteria according to the ASME B and PV Code, Sec.XI also decreases under these conditions. The total stresses decrease and the lifetime increases with increasing nozzle thickness, but outer radius of the BMI nozzles has an insignificant effect on both of these factors.

  18. Teacher Candidates in Context: Investigating Inquiry Learning, Self-Efficacy and Stress within Teacher Education

    OpenAIRE

    Coppersmith, Sarah A.

    2017-01-01

    Global changes since the 2008 economic collapse continue to impact teacher candidates worldwide who are facing unparalleled challenges as they prepare for service in educational systems experiencing reform. Research exists on college student stress, yet absent is data showing teacher candidates in relation to stress and self-efficacy as they engage in socio-constructivist inquiry learning. Teacher candidates hold employment while taking classes and serving in schools, yet research shows that ...

  19. Amygdala, Anxiety and Alpha(1) Adrenoceptors: Investigations Utilizing a Rodent Model of Traumatic Stress

    Science.gov (United States)

    2006-08-23

    the effect of a variety of different modifiers to the startle response, from drugs to environmental conditions . It has repeatedly been seen that...in rats. J. Neurosci. 1999;19: 8696-8703. Maren,S. Neurobiology of Pavlovian fear conditioning . Annu. Rev. Neurosci. 2001;24: 897-931. Marmar,CR...stress can result in post-traumatic stress disorder (PTSD) and other pathophysiological conditions . PTSD is characterized by a number of

  20. The benefits of personal strengths in mental health of stressed students: A longitudinal investigation.

    Science.gov (United States)

    Duan, Wenjie

    2016-11-01

    This study used a two-wave longitudinal research design to explore the role of individual strengths, including interpersonal strength, intellectual strength, and temperance strength, in affecting the mental health of stressed college students. A total of 404 stressed Chinese college students were screened to participate in this 12-month longitudinal study. At the beginning of the study (Time 1), students who had not experienced stressful events within the last 12 months were invited to assess their strengths, psychological well-being, and psychological symptoms. After 12 months (Time 2), 404 students who reported stressful experiences completed the scales again and were retained for the final analyses. Academics-related stressors were the most endorsed life events among college students, whose states of mental health showed downward trends from Time 1 to Time 2. Three strengths had weak to modest correlations to mental health at both Time 1 and Time 2. Although the additional variances of mental health explained by the three strengths were very modest, the mediational roles of the strengths were identified. The perceived stress completely mediated the relationship between the strengths and the psychological symptoms and partly mediated the relationship between the strengths and psychological well-being. Individual strengths may function as a defense against perceived stress and are protective factors of mental health. These strengths maintain mental health by enhancing the psychological well-being and reducing the psychological symptoms of individuals.

  1. Stress !!!

    NARCIS (Netherlands)

    Fledderus, M.

    2012-01-01

    Twee op de vijf UT-studenten hebben last van ernstige studiestress, zo erg zelfs dat het ze in hun privéleven belemmert. Die cijfers komen overeen met het landelijk beeld van stress onder studenten. Samen met 14 andere universiteits- en hogeschoolbladen enquêteerde UT Nieuws bijna 5500 studenten.

  2. Investigating the effect of silicon surface chemical treatment on Al/Si contact properties in GaP/Si solar cells

    Science.gov (United States)

    Kudryashov, D.; Gudovskikh, A.

    2018-03-01

    In the present work, experimental studies have been carried out to reveal how chemical treatment of a silicon surface affects the properties of the Al/Si contact. It has been shown that for p-type monocrystalline silicon substrates with a resistivity of 10 ohm cm, it is possible to form an ohmic Al/Si contact by magnetron sputtering of an aluminum thin film and its further annealing at temperatures of 400 - 450 °C. In the range of annealing temperatures of 250 - 400 °C, the Si substrate treatment in the HF solution leads to a significant increase in currents on the current-voltage curves of the Al/Si contact, while in the range of 450 - 700 °C, the effect of chemical treatment of the silicon is not detected.

  3. Simulation investigation of thermal phase transformation and residual stress in single pulse EDM of Ti-6Al-4V

    Science.gov (United States)

    Tang, Jiajing; Yang, Xiaodong

    2018-04-01

    The thermal phase transformation and residual stress are ineluctable in the electrical discharge machining (EDM) process, and they will greatly affect the working performances of the machined surface. This paper presents a simulation study on the thermal phase transformation and residual stress in single-pulse EDM of Ti-6Al-4V, which is the most popular titanium alloy in fields such as aircraft engine and some other leading industries. A multi-physics model including thermal, hydraulic, metallography and structural mechanics was developed. Based on the proposed model, the thickness and metallographic structure of the recast layer and heat affected layer (HAZ) were investigated. The distribution and characteristics of residual stress around the discharge crater were obtained. The recast layer and HAZ at the center of crater are found to be the thinnest, and their thicknesses gradually increase approaching the periphery of the crater. The recast layer undergoes a complete α‧ (martensitic) transformation, while the HAZ is mainly composed by the α  +  β  +  α‧ three-phase microstructure. Along the depth direction of crater, the Von Mises stress increases first and then decreases, reaching its maximal value near the interface of recast layer and HAZ. In the recast layer, both compressive stress component and tensile stress component are observed. ANOVA results showed that the influence of discharge current on maximal tensile stress is more significant than that of pulse duration, while the pulse duration has more significant influence on average thickness of the recast layer and the depth location of the maximal tensile stress. The works conducted in this study will help to evaluate the quality and integrity of EDMed surface, especially when the non-destructive testing is difficult to achieve.

  4. Development of contact failure analysis technology - first year(2000) report -

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyung Kyu; Yoon, Kyung Ho; Kang, Heung Seok; Song, Kee Nam

    2001-01-01

    Contact tractions are affected by the geometry of contacting bodies. In the present research, square punch, wedge and cylinders are considered as the geometry. Among the geometry, a square punch with rounded corners is basically used. Normal traction profile is obtained in the case of the rounded punch, and shear tractions are evaluated under the partial slip regime by using the influence function method. Multiplication of the shear traction and slip displacement in the slip region of the contact provides the friction energy dissipation from the contact. Since the trace of the shear force influences the amount of the dissipated energy, a desirable trace of the shear force may be supposed to reduce the energy dissipation. Internal stresses are evaluated from the contact normal and shear tractions, which are to be used for calculating the stress intensity factors of a surface breaking crack emanated from the contact surface. The stress intensity factors, K{sub I} and K{sub II}, are investigated during the cyclic shear. It is found that a period of crack opening exists during a shear cycle, which is effective for crack growing. So, to reduce the period can be a method for restraining the cracking failure. On the other hand, there can exist a desirable shape of the contacting body, which can restrain the cracking failure. In the experiment, fretting wear tester is used with the specially designed specimen. Wear of the contact surface are observed in detail, which shows typical shape following the partial and gross slip regimes. An algorithm for evaluating the wear volume is newly developed using the signal processing technique and the Fast Fourier Transform (FFT)

  5. Development of contact failure analysis technology - first year(2000) report -

    International Nuclear Information System (INIS)

    Kim, Hyung Kyu; Yoon, Kyung Ho; Kang, Heung Seok; Song, Kee Nam

    2001-01-01

    Contact tractions are affected by the geometry of contacting bodies. In the present research, square punch, wedge and cylinders are considered as the geometry. Among the geometry, a square punch with rounded corners is basically used. Normal traction profile is obtained in the case of the rounded punch, and shear tractions are evaluated under the partial slip regime by using the influence function method. Multiplication of the shear traction and slip displacement in the slip region of the contact provides the friction energy dissipation from the contact. Since the trace of the shear force influences the amount of the dissipated energy, a desirable trace of the shear force may be supposed to reduce the energy dissipation. Internal stresses are evaluated from the contact normal and shear tractions, which are to be used for calculating the stress intensity factors of a surface breaking crack emanated from the contact surface. The stress intensity factors, K I and K II , are investigated during the cyclic shear. It is found that a period of crack opening exists during a shear cycle, which is effective for crack growing. So, to reduce the period can be a method for restraining the cracking failure. On the other hand, there can exist a desirable shape of the contacting body, which can restrain the cracking failure. In the experiment, fretting wear tester is used with the specially designed specimen. Wear of the contact surface are observed in detail, which shows typical shape following the partial and gross slip regimes. An algorithm for evaluating the wear volume is newly developed using the signal processing technique and the Fast Fourier Transform (FFT)

  6. Aroma Effects on Physiologic and Cognitive Function Following Acute Stress: A Mechanism Investigation.

    Science.gov (United States)

    Chamine, Irina; Oken, Barry S

    2016-09-01

    Aromas may improve physiologic and cognitive function after stress, but associated mechanisms remain unknown. This study evaluated the effects of lavender aroma, which is commonly used for stress reduction, on physiologic and cognitive functions. The contribution of pharmacologic, hedonic, and expectancy-related mechanisms of the aromatherapy effects was evaluated. Ninety-two healthy adults (mean age, 58.0 years; 79.3% women) were randomly assigned to three aroma groups (lavender, perceptible placebo [coconut], and nonperceptible placebo [water] and to two prime subgroups (primed, with a suggestion of inhaling a powerful stress-reducing aroma, or no prime). Participants' performance on a battery of cognitive tests, physiologic responses, and subjective stress were evaluated at baseline and after exposure to a stress battery during which aromatherapy was present. Participants also rated the intensity and pleasantness of their assigned aroma. Pharmacologic effects of lavender but not placebo aromas significantly benefited post-stress performance on the working memory task (F(2, 86) = 5.41; p = 0.006). Increased expectancy due to positive prime, regardless of aroma type, facilitated post-stress performance on the processing speed task (F(1, 87) = 8.31; p = 0.005). Aroma hedonics (pleasantness and intensity) played a role in the beneficial lavender effect on working memory and physiologic function. The observable aroma effects were produced by a combination of mechanisms involving aroma-specific pharmacologic properties, aroma hedonic properties, and participant expectations. In the future, each of these mechanisms could be manipulated to produce optimal functioning.

  7. Contact allergy to cosmetics

    DEFF Research Database (Denmark)

    Held, E; Johansen, J D; Agner, T

    1999-01-01

    In a 2-year period, 1527 patients with contact dermatitis were investigated in the patch-test clinic. In 531 patients, allergy to cosmetics was suspected from the history and they were tested with their own cosmetic products. 40 (7.5%) (of the 531 patients) had 1 or more positive reactions, 82 (15...

  8. Analytical and Numerical Tooth Contact Analysis (TCA of Standard and Modified Involute Profile Spur Gear

    Directory of Open Access Journals (Sweden)

    Nassear Rasheid Hmoad

    2016-03-01

    Full Text Available Among all the common mechanical transmission elements, gears still playing the most dominant role especially in the heavy duty works offering extraordinary performance under extreme conditions and that the cause behind the extensive researches concentrating on the enhancement of its durability to do its job as well as possible. Contact stress distribution within the teeth domain is considered as one of the most effective parameters characterizing gear life, performance, efficiency, and application so that it has been well sought for formal gear profiles and paid a lot of attention for moderate tooth shapes. The aim of this work is to investigate the effect of pressure angle, speed ratio, and correction factor on the maximum contact and bending stress value and principal stresses distribution for symmetric and asymmetric spur gear. The analytical investigation adopted Hertz equations to find the contact stress value, distribution, and the contact zone width while the numerical part depends on Ansys software version 15, as a FE solver with Lagrange and penalty contact algorithm. The most fruitful points to be noticed are that the increasing of pressure angle and speed ratio trends to minimize all the induced stresses for the classical gears and the altered teeth shape with larger loaded side pressure angle than the unloaded side one behave better than the symmetric teeth concerning the stress reduction.

  9. Investigations of oxidative stress effects and their mechanisms in rat brain after systemic administration of ceria engineered nanomaterials

    Science.gov (United States)

    Hardas, Sarita S.

    Advancing applications of engineered nanomaterials (ENM) in various fields create the opportunity for intended (e.g. drug and gene delivery) or unintended (e.g. occupational and environmental) exposure to ENM. However, the knowledge of ENM-toxicity is lagging behind their application development. Understanding the ENM hazard can help us to avoid potential human health problems associated with ENM applications as well as to increase their public acceptance. Ceria (cerium [Ce] oxide) ENM have many current and potential commercial applications. Beyond the traditional use of ceria as an abrasive, the scope of ceria ENM applications now extends into fuel cell manufacturing, diesel fuel additives and for therapeutic intervention as a putative antioxidant. However, the biological effects of ceria ENM exposure have yet to be fully defined. Both pro-and anti-oxidative effects of ceria ENM exposure are repeatedly reported in literature. EPA, NIEHS and OECD organizations have nominated ceria for its toxicological evaluation. All these together gave us the impetus to examine the oxidative stress effects of ceria ENM after systemic administration. Induction of oxidative stress is one of the primary mechanisms of ENM toxicity. Oxidative stress plays an important role in maintaining the redox homeostasis in the biological system. Increased oxidative stress, due to depletion of antioxidant enzymes or molecules and / or due to increased production of reactive oxygen (ROS) or nitrogen (RNS) species may lead to protein oxidation, lipid peroxidation and/or DNA damage. Increased protein oxidation or lipid peroxidation together with antioxidant protein levels and activity can serve as markers of oxidative stress. To investigate the oxidative stress effects and the mechanisms of ceria-ENM toxicity, fully characterized ceria ENM of different sizes (˜ 5nm, 15nm, 30nm, 55nm and nanorods) were systematically injected into rats intravenously in separate experiments. Three brain regions

  10. Correlates and predictors of parenting stress among internationally adopting mothers: A longitudinal investigation.

    Science.gov (United States)

    Viana, Andres G; Welsh, Janet A

    2010-07-01

    This study examined correlates and predictors of parenting stress among internationally adopting (IA) mothers with the goal of expanding the knowledge base on the experiences of adoptive parents. One hundred and forty-three IA mothers completed pre-adoption (Time 0) and six months post-adoption (Time 1) surveys with questions regarding child-, parent-, and family-related characteristics. Mother reports of higher depression symptoms, higher expectations of child developmental and behavioral/emotional problems, and a greater number of children in the family at pre-adoption were significantly related to higher parenting stress six months post-adoption. In contrast, mother reports of higher expectations for child acceptance and higher perceived social support at pre-adoption were significantly related to lower parenting stress six months post-adoption. Higher maternal depression symptoms, higher expectations of child behavior/emotional problems, and a greater number of children in the family at pre-adoption together accounted for 22% of the variance in parenting stress six months post-adoption. Concurrent higher maternal depression symptoms and higher reports of child behavioral/emotional problems predicted higher parenting stress six months post-adoption over and above pre-adoption predictors, and accounted for an additional 33% of the variance. Results and directions for future research are discussed from a transactional perspective, with particular emphasis on the importance of pre-adoptive information for adoption research and practice.

  11. Mental health nursing in Jordan: an investigation into experience, work stress and organizational support.

    Science.gov (United States)

    Hamdan-Mansour, Ayman M; Al-Gamal, Ekhlas; Puskar, Kathryn; Yacoub, Mohammad; Marini, Anita

    2011-04-01

    Changes in mental health services have an impact on the role and practice of mental health nurses. The purpose of this study was to examine Jordanian mental health nurses' experiences of providing mental health care, their work-related stress, and organizational support received. A descriptive correlation design was used. Data were collected using self-report questionnaires from 92 mental health nurses in Jordan. The result of this study revealed that mental health nurses shared a high level of agreement on the importance of most nursing tasks. Mental health nurses reported a moderate level of stress, with a lack of resources and relationship and conflict with other professionals being the most frequent stressors. Nurses perceived a low level of support for their work from their supervisors. Work stress and conflict with other professionals had a significant, negative correlation with the perception the nurses had of their immediate supervisors (r = -0.29, P work stress, organizational support, and the nurses' age, sex, or level of education. This study has clinical implications in terms of developing strategies for reducing stress and improving organizational support among mental health nurses, and it should help in future research. © 2011 The Authors. International Journal of Mental Health Nursing © 2011 Australian College of Mental Health Nurses Inc.

  12. Stress, anxiety, depression, and epilepsy: investigating the relationship between psychological factors and seizures.

    Science.gov (United States)

    Thapar, Ajay; Kerr, Michael; Harold, Gordon

    2009-01-01

    The goal of the study described here was to examine the interrelationship between psychological factors (anxiety, stress, and depression) and seizures. In this longitudinal cohort study, data on anxiety, depression, perceived stress, and seizure recency (time since last seizure) and frequency were collected at two time points using standard validated questionnaire measures. Empirically based models with psychological factors explaining change in (1) seizure recency and (2) seizure frequency scores across time were specified. We then tested how these psychological factors acted together in predicting seizure recency and frequency. Our data were used to test whether these models were valid for the study population. Latent variable structural equation modeling was used for the analysis. Four hundred thirty-three of the 558 individuals who initially consented to participate provided two waves of data for this analysis. Stress (beta=0.25, Panxiety (beta=0.30, Pdepression (beta=0.30, Pdepression that mediated the relationship of both anxiety and stress with modeled change in seizure recency (beta=0.19, PDepression mediates the relationship between stress and anxiety and change in seizure recency and seizure frequency. These findings highlight the importance of depression management in addition to seizure management in the assessment and treatment of epilepsy in an adult population.

  13. Metabolomics as a Tool to Investigate Abiotic Stress Tolerance in Plants

    Directory of Open Access Journals (Sweden)

    Aurelio Gómez-Cadenas

    2013-03-01

    Full Text Available Metabolites reflect the integration of gene expression, protein interaction and other different regulatory processes and are therefore closer to the phenotype than mRNA transcripts or proteins alone. Amongst all –omics technologies, metabolomics is the most transversal and can be applied to different organisms with little or no modifications. It has been successfully applied to the study of molecular phenotypes of plants in response to abiotic stress in order to find particular patterns associated to stress tolerance. These studies have highlighted the essential involvement of primary metabolites: sugars, amino acids and Krebs cycle intermediates as direct markers of photosynthetic dysfunction as well as effectors of osmotic readjustment. On the contrary, secondary metabolites are more specific of genera and species and respond to particular stress conditions as antioxidants, Reactive Oxygen Species (ROS scavengers, coenzymes, UV and excess radiation screen and also as regulatory molecules. In addition, the induction of secondary metabolites by several abiotic stress conditions could also be an effective mechanism of cross-protection against biotic threats, providing a link between abiotic and biotic stress responses. Moreover, the presence/absence and relative accumulation of certain metabolites along with gene expression data provides accurate markers (mQTL or MWAS for tolerant crop selection in breeding programs.

  14. Investigating psychological and physiological responses to the Trier Social Stress Test in young adults with insomnia.

    Science.gov (United States)

    Chen, Ivy Y; Jarrin, Denise C; Ivers, Hans; Morin, Charles M

    2017-12-01

    Stress and hyperarousal both contribute to insomnia. Elevated stress-related sleep reactivity is associated with hyperarousal, and might constitute a vulnerability to future insomnia. The present study examined acute stress-induced arousal and its association with nocturnal sleep. Participants were 30 healthy adults (66.7% female, M age  = 26.7 years): 10 with insomnia (INS) and 20 good sleepers with high vulnerability (HV) or low vulnerability (LV) to insomnia. They underwent two consecutive nights of polysomnography. During the evening preceding the second night, the Trier Social Stress Test (TSST) was administered, and psychological and physiological arousal indices were assessed. The TSST elicited an increase in psychological and physiological arousal in all three groups. The INS group showed greater acute cortisol response (p stress reactivity and bedtime hyperarousal might represent a trait-like vulnerability in certain good sleepers. More research is warranted to validate and expand these preliminary findings. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. Work-related stress in a humanitarian context: a qualitative investigation.

    Science.gov (United States)

    Jachens, Liza; Houdmont, Jonathan; Thomas, Roslyn

    2018-03-13

    There is a paucity of research on the subjective stress-related experiences of humanitarian aid workers. Most evaluations of stress among these individuals focus on trauma and related conditions or adopt a quantitative approach. This interview-based study explored how 58 humanitarian aid workers employed by a United Nations-aligned organisation perceived the transactional stress process. The thematic analysis revealed eight main topics of interest: an emergency culture was found where most employees felt compelled to offer an immediate response to humanitarian needs; employees identified strongly with humanitarian goals and reported a high level of engagement; the rewards of humanitarian work were perceived as motivating and meaningful; constant change and urgent demands resulted in work overload; and managing work-life boundaries and receiving positive support from colleagues and managers helped to buffer perceived stress, work overload, and negative health outcomes. The practical implications of the results are discussed and suggestions made in the light of current research and stress theory. © 2018 The Author(s). Disasters © Overseas Development Institute, 2018.

  16. Off-state stress and pulse response investigation of InAl/Ga HFET

    International Nuclear Information System (INIS)

    Florovic, M.; Hronec, P.; Kovac, J.; Skriniarova, J.; Donoval, D.; Kordos, P.

    2011-01-01

    In this study In 0.18 Al 0.82 N/GaN HFETs were off-state tested under high drain bias, I-V characteristics were measured using standard DC voltage source (drain-source, gate-source). Subsequently drain current responses on pulse gate-source voltage for various drain-source voltages were recorded and analysed. Static performance of InAlN/GaN HFETs with AlN buffer layer prepared at different conditions were analysed before, during and after the off-state stress. The static output I-V characteristics show the maximum drain current I d ≅ 0,44 A/mm for V gs = 6 V, the device has pinch-off at V gs - 4.4 V. The drain and gate currents of the InAlN/GaN HFET were measured continuously during the off-state stress (V ds = 30 V, V gs = -4.4 V), a partial increase of the drain/gate current was observed after this interruption, which indicates on some recovery effect. The devices were characterised in details after the total stress time of 60 min., as well as after 30 min without the stress, the output I-V characteristic show permanent off-state stress degradation. This effect will be studied in details in the next. (authors)

  17. Contact stresses modeling at the Panda-type fiber single-layer winding and evaluation of their impact on the fiber optic properties

    Science.gov (United States)

    Lesnikova, Yu I.; Smetannikov, O. Yu; Trufanov, A. N.; Trufanov, N. A.

    2017-02-01

    The impact of contact transverse forces on the birefringence of the single-mode polarization-maintaining Panda-type fiber is numerically modeled. It has been established that with a single-row power winding on a cylindrical mandrel, the fiber tension at winding is the principal factor that influences birefringence. When coiling the fiber based on the local defect microbending, the birefringence at the microbending point differs from that of the free fiber by 1.3%.

  18. Contact Mechanics of a Small Icosahedral Virus

    Science.gov (United States)

    Zeng, Cheng; Hernando-Pérez, Mercedes; Dragnea, Bogdan; Ma, Xiang; van der Schoot, Paul; Zandi, Roya

    2017-07-01

    A virus binding to a surface causes stress of the virus cage near the contact area. Here, we investigate the potential role of substrate-induced structural perturbation in the mechanical response of virus particles to adsorption. This is particularly relevant to the broad category of viruses stabilized by weak noncovalent interactions. We utilize atomic force microscopy to measure height distributions of the brome mosaic virus upon adsorption from solution on atomically flat substrates and present a continuum model that captures our observations and provides estimates of elastic properties and of the interfacial energy of the virus, without recourse to indentation.

  19. INVESTIGATION OF PROPERTIES OF CURRENT COLLECTOR ELEMENTS AND THEIR EFFECT ON THE PERFORMANCE OF TRIBOSYSTEM «CONTACT WIRE - CURRENT COLLECTOR ELEMENT»

    Directory of Open Access Journals (Sweden)

    Yu. L. Bolshakov

    2015-11-01

    Full Text Available Purpose. The paper is devoted to the detailed analysis of interrelations at the contact point of friction pair «contact wire – current collector insert». In the work it is necessary: 1 to examine quality of manufacturing of specimens of current collector elements from different manufacturers; 2 to narrow the range of hardness for carbon inserts; 3 to develop a technique of sorting carbon current collector inserts for the structural parameters. Methodology. The executed work was based on the use of the theory of reliability of technical systems and electromechanical processes. Findings. The paper studies the interrelation at the contact point of friction pair «contact wire – current col lector insert», the connection was established between the hardness and electrical resistivity. It is proposed to narrow the range of carbon inserts hardness. The method of sorting coal collector inserts in hardness was developed, and the research has revealed the discrepancy of current collector inserts with existing regulations. It was proposed to equip the pantographs slide with current collector elements using special scheme and to develop a specialized research facility, which will be possible to conduct studies of the interaction of the friction pair «contact wire – current collector insert». Originality. In the course of the study the current collector inserts the sharp structural heterogeneity and fluctuations of the density of the material along the length of the insert were established. The dependence between hardness of inserts and electrical resistivity was established. It was analyzed and concluded about the need to reduce the values of the normal range of hardness. Based on the results of the research, the experimental dependences were obtained and proposed the method for sorting carbon current collector inserts for the structural parameters. Practical value. The obtained results of coal current collector inserts define the need to use

  20. The Effect of Work Stress and Coping on Organizational Justice: An Empirical Investigation of Turkish Telecommunications and Banking Industries

    Directory of Open Access Journals (Sweden)

    Tutku Seckin-Celik

    2016-12-01

    Full Text Available The aim of this paper is to investigate the role of coping mechanisms and work stress on employees’ perceptions of organizational justice. A survey of 211 white-collar employees in the banking and telecommunications industries was taken. Multiple regression analyses were performed in order to understand the effect of coping mechanisms and work stress on organizational justice. The results showed that overall perception of justice is affected negatively by work stress and positively by coping mechanisms, except emotion-focused coping. However, sub-dimensions of organizational justice showed distinctive relationship patterns. Thus, it was concluded both individual and organizational determinants play a role in employees’ perceptions of organizational justice.

  1. Investigation into the stress corrosion cracking properties of AA2099, an aluminum-lithium-copper alloy

    Science.gov (United States)

    Padgett, Barbara Nicole

    Recently developed Al-Li-Cu alloys show great potential for implementation in the aerospace industry because of the attractive mix of good mechanical properties and low density. AA2099 is an Al-Li-Cu alloy with the following composition Al-2.69wt%Cu-1.8wt%Li-0.6wt%Zn-0.3wt%Mg-0.3wt%Mn-0.08wt%Zr. The environmental assisted cracking and localized corrosion behavior of the AA2099 was investigated in this thesis. The consequences of uncontrolled grain boundary precipitation via friction stir welding on the stress corrosion cracking (SCC) behavior of AA2099 was investigated first. Using constant extension rate testing, intergranular corrosion immersion experiments, and potentiodynamic scans, the heat-affected zone on the trailing edge of the weld (HTS) was determined to be most susceptible of the weld zones. The observed SCC behavior for the HTS was linked to the dissolution of an active phase (Al2CuLi, T1) populating the grain boundary. It should be stated that the SCC properties of AA2099 in the as-received condition were determined to be good. Focus was then given to the electrochemical behavior of precipitate phases that may occupy grain and sub-grain boundaries in AA2099. The grain boundary micro-chemistry and micro-electrochemistry have been alluded to within the literature as having significant influence on the SCC behavior of Al-Li-Cu alloys. Major precipitates found in this alloy system are T1 (Al 2CuLi), T2 (Al7.5Cu4Li), T B (Al6CuLi3), and theta (Al2 Cu). These phases were produced in bulk form so that the electrochemical nature of each phase could be characterized. It was determined T1 was most active electrochemically and theta was least. When present on grain boundaries in the alloy, electrochemical behavior of the individual precipitates aligned with the observed corrosion behavior of the alloy (e.g. TB was accompanied by general pitting corrosion and T 1 was accompanied by intergranular corrosion attack). In addition to the electrochemical behavior of

  2. Investigating the underlying mechanism of Saccharomyces cerevisiae in response to ethanol stress employing RNA-seq analysis.

    Science.gov (United States)

    Li, Ruoyun; Xiong, Guotong; Yuan, Shukun; Wu, Zufang; Miao, Yingjie; Weng, Peifang

    2017-11-03

    Saccharomyces cerevisiae has been widely used for wine fermentation and bio-fuels production. A S. cerevisiae strain Sc131 isolated from tropical fruit shows good fermentation properties and ethanol tolerance, exhibiting significant potential in Chinese bayberry wine fermentation. In this study, RNA-sequence and RT-qPCR was used to investigate the transcriptome profile of Sc131 in response to ethanol stress. Scanning Electron Microscopy were carried out to observe surface morphology of yeast cells. Totally, 937 genes were identified differential expressed, including 587 up-regulated and 350 down-regulated genes, after 4-h ethanol stress (10% v/v). Transcriptomic analysis revealed that, most genes involved in regulating filamentous growth or pseudohyphal growth were significantly up-regulated in response to ethanol stress. The complex protein quality control machineries, Hsp90/Hsp70 and Hsp104/Hsp70/Hsp40 based chaperone system combining with ubiquitin-proteasome proteolytic pathway were both activated to recognize and degrade misfolding proteins. Genes related to biosynthesis and metabolism of two well-known stress-responsive substances trehalose and ergosterol were generally up-regulated, while genes associated with amino acids biosynthesis and metabolism processes were differentially expressed. Moreover, thiamine was also important in response to ethanol stress. This research may promote the potential applications of Sc131 in the fermentation of Chinese bayberry wine.

  3. Engineering amount of cell-cell contact demonstrates biphasic proliferative regulation through RhoA and the actin cytoskeleton

    International Nuclear Information System (INIS)

    Gray, Darren S.; Liu, Wendy F.; Shen, Colette J.; Bhadriraju, Kiran; Nelson, Celeste M.; Chen, Christopher S.

    2008-01-01

    Endothelial cell-cell contact via VE-cadherin plays an important role in regulating numerous cell functions, including proliferation. However, using different experimental approaches to manipulate cell-cell contact, investigators have observed both inhibition and stimulation of proliferation depending on the adhesive context. In this study, we used micropatterned wells combined with active positioning of cells by dielectrophoresis in order to investigate whether the number of contacting neighbors affected the proliferative response. Varying cell-cell contact resulted in a biphasic effect on proliferation; one contacting neighbor increased proliferation, while two or more neighboring cells partially inhibited this increase. We also observed that cell-cell contact increased the formation of actin stress fibers, and that expression of dominant negative RhoA (RhoN19) blocked the contact-mediated increase in stress fibers and proliferation. Furthermore, examination of heterotypic pairs of untreated cells in contact with RhoN19-expressing cells revealed that intracellular, but not intercellular, tension is required for the contact-mediated stimulation of proliferation. Moreover, engagement of VE-cadherin with cadherin-coated beads was sufficient to stimulate proliferation in the absence of actual cell-cell contact. In all, these results demonstrate that cell-cell contact signals through VE-cadherin, RhoA, and intracellular tension in the actin cytoskeleton to regulate proliferation

  4. Investigation of the impact of mechanical stress on the properties of silicon strip sensors

    CERN Document Server

    Affolder, Tony; The ATLAS collaboration

    2017-01-01

    The new ATLAS tracker for phase II will be composed of silicon pixel and strip sensor modules. The strip sensor module consists of silicon sensors, boards and readout chips. Adhesives are used to connect the modular components thermally and mechanically. It was shown that the silicon sensor is exposed to mechanical stress, due to temperature difference between construction and operation. Mechanical stress can damage the sensor and can change the electrical properties. The thermal induced tensile stress near to the surface of a silicon sensor in a module was simulated and the results are compared to a cooled module. A four point bending setup was used to measure the maximum tensile stress of silicon detectors and to verify the piezoresistive effects on two recent development sensor types used in ATLAS (ATLAS07 and ATLAS12). Changes in the interstrip, bulk and bias resistance and capacitance as well as the coupling capacitance and the implant resistance were measured. The Leakage current was observed to decreas...

  5. Correlates and Predictors of Parenting Stress among Internationally Adopting Mothers: A Longitudinal Investigation

    Science.gov (United States)

    Viana, Andres G.; Welsh, Janet A.

    2010-01-01

    This study examined correlates and predictors of parenting stress among internationally adopting (IA) mothers with the goal of expanding the knowledge base on the experiences of adoptive parents. One hundred and forty-three IA mothers completed pre-adoption (Time 0) and six months post-adoption (Time 1) surveys with questions regarding child-,…

  6. Investigation of Stress Concentration and Casing Strength Degradation Caused by Corrosion Pits

    Directory of Open Access Journals (Sweden)

    Wei Yan

    2016-01-01

    Full Text Available Downhole casing and tubing are subjected to corrosion in many cases because of the exposure to corrosive environment. A more serious problem is that pitting corrosion occurs in the casing inner surface. Meanwhile, downhole strings are subjected to various forms of mechanical loads, for example, internal pressure load, external collapse load, or both. These loads acting on the corrosion pits will cause stress concentration and degrade the casing strength. Thus, it is essential to evaluate the stress concentration degree reasonably. The SCF (stress concentration factor is usually used to characterize the degree of stress concentration induced by corrosion pits. This paper presented a comparison on the SCFs regarding the analytical method for a single pit and experimental method for double pits. The results show that the SCF of a single pit depends mainly on the depth of the corrosion pit; however, the SCF of the double pits strongly depends on the pits distance. A correction factor of 1.3 was recommended in the double pits SCF prediction model.

  7. Investigations on the effect of creep stress on the thermal properties of metallic materials

    International Nuclear Information System (INIS)

    Radtke, U.; Crostack, H.A.; Winschuh, E.

    1995-01-01

    Using thermal wave analysis with front side infrared detection on sample material damaged by creep, one examines whether the creep stress has an effect on the thermal material properties and to what effect this can be used to estimate the remaining service life. (orig.) [de

  8. Photothermoelastic investigation of transient thermal stresses in circular plates with a hole heated by fluid

    International Nuclear Information System (INIS)

    Tsuji, Masatoshi; Tsujimura, Soichi; Oda, Masanobu.

    1980-01-01

    In this study, the practical use of the method of measuring the unsteady thermal stress in a body subjected to the thermal load due to fluid by photoelastic method and the improvement of accuracy were attempted. The internal wall of a hollow disk was heated with high temperature fluid, and the external wall was cooled with low temperature fluid or thermally insulated. The photoelastic experiment on this hollow disk was carried out in a vacuum tank to given axisymmetric temperature distribution and to prevent heat dissipation due to the convection from both surfaces of the disk, and the temperature distribution and thermal stress were measured. The experimental values were compared with the theoretical values, and the accuracy of the experimental method and measurement was examined. Moreover, the disk with an eccentric hole was tested by the same method, and the effects of the eccentricity and hole diameter on the maximum thermal stress were examined. The experimental apparatus and method, and the experimental results are described. By this method, the condition of thermal loading with fluid was almost attained, and the experimental values of unsteady thermal stress were in good agreement with the theoretical values. (Kako, I.)

  9. Investigating the effect of collaborative care on depression, anxiety, and stress of patients after coronary angioplasty

    Directory of Open Access Journals (Sweden)

    Parastoo Rezapour

    2016-02-01

    Full Text Available Background: Coronary artery disease and its associated treatment interventions such as angioplasty can lead to emotional problems, including depression, anxiety, and stress, in patients and might have adverse effects on the recovery process. This study aimed to evaluate the effect of collaborative care model on depression, anxiety, and stress in patients after coronary angioplasty. Methods: This clinical trial was conducted on 50 patients undergoing coronary angioplasty, who were referred to intensive care unit and surgical ward of one of the hospitals of Isfahan, Iran, in 2015. Samples were selected through randomized convenience sampling and were divided into intervention and control group (n=25 for each group. Collaborative care model, consisting of four stages of motivation, preparation, engagement, and evaluation, was implemented for the intervention group through five 45-60 minute sessions and a three-month telephone follow-up. Data was collected using depression, anxiety, and stress scale (DASS-42 before and one month after the intervention from both groups. Data were analyzed using descriptive statistics, Chi-square, as well as independent and paired t-tests in SPSS, version 18. Results: In this study, mean score of depression was significantly decreased in the intervention group after the implementation of collaborative model (from 31.6±3.7 to 6.3±5.03 (P<0.001, and mean anxiety and stress scores were reduced from 32.6±3.04 and 32.2±3.3 to 6.2±4.1 and 8.5±4.8, respectively (P<0.001. In this regard, a significant difference was observed between the intervention and control groups (P<0.001. Conclusion: Implementation of collaborative care could be associated with lower depression, anxiety, and stress in patients after coronary angioplasty. Therefore, its application is recommended as an effective method for such patients.

  10. Investigating Endothelial Activation and Oxidative Stress in relation to Glycaemic Control in a Multiethnic Population

    Science.gov (United States)

    Brady, E. M.; Webb, D. R.; Morris, D. H.; Khunti, K.; Talbot, D. S. C.; Sattar, N.; Davies, M. J.

    2012-01-01

    Aim. An exploration of ethnic differences in measures of oxidative stress and endothelial activation in relation to known cardiovascular risk factors within South Asians (SA) and White Europeans (WE) residing in the UK. Methods. 202 participants within a UK multiethnic population provided biomedical and anthropometric data. Human urinary 2,3-dinor-8-iso-prostaglandin-F1α and plasma ICAM-1 were quantified as measures of oxidative stress and endothelial activation, respectively. Results. 2,3-Dinor-8-iso-prostaglandin-F1α levels were significantly higher in the SA group compared to WE group (10.36 (95% CI: 9.09, 11.79) versus 8.46 (7.71, 9.29), P = 0.021) after adjustment for age, gender, smoking status, body weight, HbA1c, and medication. Oxidative stress was positively associated with HbA1c (β = 1.08, 95% CI:1.02, 1.14, P = 0.009), fasting (β = 1.06, 95% CI: 1.02, 1.10, P = 0.002), and 2 hr glucose (β = 1.02, 95% CI: 1.00, 1.04, P = 0.052). In each adjusted model, SA continued to have elevated levels of oxidative stress compared to WE. ICAM-1 levels were significantly higher in the composite IGR group compared to the normoglycaemic group (P < 0.001). No ethnic differences in ICAM-1 were observed. Conclusion. These results suggest that SA are more susceptible to the detrimental effects of hyperglycaemia-induced oxidative stress at lower blood glucose thresholds than WE. Further research into the potential mechanisms involved is warranted. PMID:23304116

  11. Investigating Endothelial Activation and Oxidative Stress in relation to Glycaemic Control in a Multiethnic Population

    Directory of Open Access Journals (Sweden)

    E. M. Brady

    2012-01-01

    Full Text Available Aim. An exploration of ethnic differences in measures of oxidative stress and endothelial activation in relation to known cardiovascular risk factors within South Asians (SA and White Europeans (WE residing in the UK. Methods. 202 participants within a UK multiethnic population provided biomedical and anthropometric data. Human urinary 2,3-dinor-8-iso-prostaglandin-F1α and plasma ICAM-1 were quantified as measures of oxidative stress and endothelial activation, respectively. Results. 2,3-Dinor-8-iso-prostaglandin-F1α levels were significantly higher in the SA group compared to WE group (10.36 (95% CI: 9.09, 11.79 versus 8.46 (7.71, 9.29, P=0.021 after adjustment for age, gender, smoking status, body weight, HbA1c, and medication. Oxidative stress was positively associated with HbA1c (β=1.08, 95% CI:1.02, 1.14, P=0.009, fasting (β=1.06, 95% CI: 1.02, 1.10, P=0.002, and 2 hr glucose (β=1.02, 95% CI: 1.00, 1.04, P=0.052. In each adjusted model, SA continued to have elevated levels of oxidative stress compared to WE. ICAM-1 levels were significantly higher in the composite IGR group compared to the normoglycaemic group (P<0.001. No ethnic differences in ICAM-1 were observed. Conclusion. These results suggest that SA are more susceptible to the detrimental effects of hyperglycaemia-induced oxidative stress at lower blood glucose thresholds than WE. Further research into the potential mechanisms involved is warranted.

  12. [Eye contact effects: A therapeutic issue?

    Science.gov (United States)

    Baltazar, M; Conty, L

    2016-12-01

    The perception of a direct gaze - that is, of another individual's gaze directed at the observer that leads to eye contact - is known to influence a wide range of cognitive processes and behaviors. We stress that these effects mainly reflect positive impacts on human cognition and may thus be used as relevant tools for therapeutic purposes. In this review, we aim (1) to provide an exhaustive review of eye contact effects while discussing the limits of the dominant models used to explain these effects, (2) to illustrate the therapeutic potential of eye contact by targeting those pathologies that show both preserved gaze processing and deficits in one or several functions that are targeted by the eye contact effects, and (3) to propose concrete ways in which eye contact could be employed as a therapeutic tool. (1) We regroup the variety of eye contact effects into four categories, including memory effects, activation of prosocial behavior, positive appraisals of self and others and the enhancement of self-awareness. We emphasize that the models proposed to account for these effects have a poor predictive value and that further descriptions of these effects is needed. (2) We then emphasize that people with pathologies that affect memory, social behavior, and self and/or other appraisal, and self-awareness could benefit from eye contact effects. We focus on depression, autism and Alzheimer's disease to illustrate our proposal. To our knowledge, no anomaly of eye contact has been reported in depression. Patients suffering from Alzheimer disease, at the early and moderate stage, have been shown to maintain a normal amount of eye contact with their interlocutor. We take into account that autism is controversial regarding whether gaze processing is preserved or altered. In the first view, individuals are thought to elude or omit gazing at another's eyes while in the second, individuals are considered to not be able to process the gaze of others. We adopt the first stance

  13. Stress.

    Science.gov (United States)

    Chambers, David W

    2008-01-01

    We all experience stress as a regular, and sometimes damaging and sometimes useful, part of our daily lives. In our normal ups and downs, we have our share of exhaustion, despondency, and outrage--matched with their corresponding positive moods. But burnout and workaholism are different. They are chronic, dysfunctional, self-reinforcing, life-shortening habits. Dentists, nurses, teachers, ministers, social workers, and entertainers are especially susceptible to burnout; not because they are hard-working professionals (they tend to be), but because they are caring perfectionists who share control for the success of what they do with others and perform under the scrutiny of their colleagues (they tend to). Workaholics are also trapped in self-sealing cycles, but the elements are ever-receding visions of control and using constant activity as a barrier against facing reality. This essay explores the symptoms, mechanisms, causes, and successful coping strategies for burnout and workaholism. It also takes a look at the general stress response on the physiological level and at some of the damage American society inflicts on itself.

  14. Contact and Non-contact Measurements of Grinding Pins

    Directory of Open Access Journals (Sweden)

    Magdziak Marek

    2015-01-01

    Full Text Available The paper presents the results of contact and non-contact measurements of external profiles of selected grinding pins. The measurements were conducted in order to choose the appropriate measuring technique in the case of the considered measurement task. In the case of contact measurements the coordinate measuring machine ACCURA II was applied. The used coordinate measuring machine was equipped with the contact scanning probe VAST XT and the Calypso inspection software. Contact coordinate measurements were performed by using of different measurement strategies. The applied strategies included different scanning velocities and distances between measured points. Non-contact measurements were conducted by means of the tool presetter produced by the Mahr company. On the basis of gained results the guidelines concerning measurements of grinding pins were formulated. The measurements of analyzed grinding pins performed by means of the non-contact measuring system are characterized by higher reproducibility than the contact measurements. The low reproducibility of contact measurements may be connected with the inaccuracy of the selected coordinate measuring machine and the measuring probe, the measurement parameters and environmental conditions in the laboratory where the coordinate measuring machine is located. Moreover, the paper presents the possible application of results of conducted investigations. The results of non-contact measurements can be used in the simulation studies of grinding processes. The simulations may reduce the costs of machining processes.

  15. Sequential Indentation Tests to Investigate the Influence of Confining Stress on Rock Breakage by Tunnel Boring Machine Cutter in a Biaxial State

    Science.gov (United States)

    Liu, Jie; Cao, Ping; Han, Dongya

    2016-04-01

    The influence of confining stress on rock breakage by a tunnel boring machine cutter was investigated by conducting sequential indentation tests in a biaxial state. Combined with morphology measurements of breaking grooves and an analysis of surface and internal crack propagation between nicks, the effects of maximum confining stress and minimum stress on indentation efficiency, crack propagation and chip formation were investigated. Indentation tests and morphology measurements show that increasing a maximum confining stress will result in increased consumed energy in indentations, enlarged groove volumes and promoted indentation efficiency when the corresponding minimum confining stress is fixed. The energy consumed in indentations will increase with increase in minimum confining stress, however, because of the decreased groove volumes as the minimum confining stress increases, the efficiency will decrease. Observations of surface crack propagation show that more intensive fractures will be induced as the maximum confining stress increases, whereas the opposite occurs for an increase of minimum confining stress. An observation of the middle section, cracks and chips shows that as the maximum confining stress increases, chips tend to form in deeper parts when the minimum confining stress is fixed, whereas they tend to formed in shallower parts as the minimum confining stress increases when the maximum confining stress is fixed.

  16. A Hydraulic Stress Measurement System for Investigations at Depth in Slim Boreholes

    Science.gov (United States)

    Ask, M. V. S.; Ask, D.; Cornet, F. H.; Nilsson, T.; Talib, M.; Sundberg, J.

    2017-12-01

    Knowledge of the state of stress is essential to most underground work in rock mechanics as it provides means to analyze the mechanical behavior of a rock mass, serve as boundary condition in rock engineering problems, and help understand rock mass stability and groundwater flow. Luleå University of Technology (LTU) has developed and built a wire-line system for hydraulic rock stress measurements in slim boreholes together with the University of Strasbourg and Geosigma AB. The system consists of a downhole- and a surface unit. The downhole unit consists of hydraulic fracturing equipment (straddle packers and downhole imaging tool) and their associated data acquisition systems. The surface unit comprises of a 40-foot container permanently mounted on a trailer, which is equipped with a tripod, wire-line winches, water hydraulics, and a generator. The surface unit serves as a climate-independent on-site operations center, as well as a self-supporting transport vessel for the entire system. Three hydraulic stress testing methods can be applied: hydraulic fracturing, sleeve fracturing and hydraulic testing of pre-existing fractures. The three-dimensional stress tensor and its variation with depth within a continuous rock mass can be determined in a scientific unambiguously way by integrating results from the three test methods. The testing system is state of the art in several aspects including: (1) Large depth range (3 km), (2) Ability to test three borehole dimensions, (3) Resistivity imager maps the orientation of tested fracture (which is highlighted); (4) Highly stiff and resistive to corrosion downhole testing equipment; and (5) Very detailed control on the injection flow rate and cumulative volume is obtained by a hydraulic injection pump with variable piston rate, and a highly sensitive flow-meter. These aspects highly reduce measurement-related uncertainties of stress determination. Commissioning testing and initial field tests are scheduled to occur in a 1200

  17. Salivary alpha-amylase: More than an enzyme Investigating confounders of stress-induced and basal amylase activity

    OpenAIRE

    Strahler, Jana

    2010-01-01

    Summary: Salivary alpha-amylase: More than an enzyme - Investigating confounders of stress-induced and basal amylase activity (Dipl.-Psych. Jana Strahler) The hypothalamus-pituitary-adrenal (HPA) axis and the autonomic nervous system (ANS) are two of the major systems playing a role in the adaptation of organisms to developmental changes that threaten homeostasis. The HPA system involves the secretion of glucocorticoids, including cortisol, into the circulatory system. Numerous studies hav...

  18. Investigation of adsorption and absorption-induced stresses using microcantilever sensors

    International Nuclear Information System (INIS)

    Hu, Zhiyu; Thundat, T.; Warmack, R. J.

    2001-01-01

    The interaction between a vapor and a thin film adsorbed on one side of a bimaterial microcantilever produces differential stress, resulting in readily measurable curvatures of the cantilever structure. Depending upon the system studied, there exist two types of gas - solid interaction: bulk-like absorption and surface-like adsorption. The absorption of hydrogen into palladium results in film expansion whose magnitude is governed by hydrogen partial pressure. The bending of a bimaterial microcantilever (palladium/silicon) due to hydrogen absorption depends on the thickness of the palladium film and is reversible but rate limited by a surface barrier. In contrast, the stress induced by adsorption of mercury onto a bimaterial (gold/silicon) cantilever is irreversible at room temperature, is rate limited by surface coverage, and is independent of the gold - film thickness. [copyright] 2001 American Institute of Physics

  19. Contact mechanics of reverse total shoulder arthroplasty during abduction: the effect of neck-shaft angle, humeral cup depth, and glenosphere diameter.

    Science.gov (United States)

    Langohr, G Daniel G; Willing, Ryan; Medley, John B; Athwal, George S; Johnson, James A

    2016-04-01

    Implant design parameters can be changed during reverse shoulder arthroplasty (RSA) to improve range of motion and stability; however, little is known regarding their impact on articular contact mechanics. The purpose of this finite element study was to investigate RSA contact mechanics during abduction for different neck-shaft angles, glenosphere sizes, and polyethylene cup depths. Finite element RSA models with varying neck-shaft angles (155°, 145°, 135°), sizes (38 mm, 42 mm), and cup depths (deep, normal, shallow) were loaded with 400 N at physiological abduction angles. The contact area and maximum contact stress were computed. The contact patch and the location of maximum contact stress were typically located inferomedially in the polyethylene cup. On average for all abduction angles investigated, reducing the neck-shaft angle reduced the contact area by 29% for 155° to 145° and by 59% for 155° to 135° and increased maximum contact stress by 71% for 155° to 145° and by 286% for 155° to 135°. Increasing the glenosphere size increased the contact area by 12% but only decreased maximum contact stress by 2%. Decreasing the cup depth reduced the contact area by 40% and increased maximum contact stress by 81%, whereas increasing the depth produced the opposite effect (+52% and -36%, respectively). The location of the contact patch and maximum contact stress in this study matches the area of damage seen frequently on clinical retrievals. This finding suggests that damage to the inferior cup due to notching may be potentiated by contact stresses. Increasing the glenosphere diameter improved the joint contact area and did not affect maximum contact stress. However, although reducing the neck-shaft angle and cup depth can improve range of motion, our study shows that this also has some negative effects on RSA contact mechanics, particularly when combined. Copyright © 2016 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc

  20. Experimental and numerical investigation on cold flat rolling processes of DC04 sheets with special focus on residual stresses

    International Nuclear Information System (INIS)

    Bauer, A; Binotsch, C; Awiszus, B; Mehner, T; Sieber, M; Lampke, T

    2016-01-01

    The process of cold flat rolling is a widespread industrial technique to manufacture semi-finished products, e.g., for the automotive or homewares industry. Basic knowledge of the process regarding dimensioning and adjustment of defined characteristics is already state of the art. However, a detailed consideration and analysis with respect to local inhomogeneous residual stresses in several process steps mostly remains disregarded. A broad understanding of the process due to the distribution of residual stresses in the workpiece and the direction of the stress tensors allows for a definition of the characteristics of the workpiece even before the actual manufacturing process. For that purpose, it is necessary to perform numerical investigations by means of the finite element analysis (FEA) of cold flat rolling processes. Within this contribution, several approaches for the calibration of the FEA with the real flat rolling process will be addressed and discussed. To ensure that the numerical consideration provides realistic results, this calibration is indispensable. General parameters such as geometry, height reduction, rolling temperature, process time, and the rolling speed are considered as well as a photogrammetric survey, and calculated residual stresses with results of X-ray diffraction (XRD) will be compared. In the course of the experiments, a good agreement between the stress results of the FEA and the XRD was found in the center of the specimen. In combination with the allocation of the stress orientations, the agreement close to the edges is also fine. Some issues that cause differences between the FEA and the experiment are dis-cussed. (paper)

  1. Assessment of Brain Derived Neurotrophic Factor in hair to study stress responses: A pilot investigation.

    Science.gov (United States)

    Harb, H; González-de-la-Vara, M; Thalheimer, L; Klein, U; Renz, H; Rose, M; Kruse, J; Potaczek, D P; Peters, E M J

    2017-12-01

    To study pathogenic stress-effects in health and disease, it is paramount to define easy access parameters for non-invasive analysis of biological change in response to stress. Hair samples successfully provide this access for the study of hypothalamus-pituitary-adrenal axis (HPA) changes. In this study, we assess the hair expression and corresponding epigenetic changes of a neurotrophin essential for autonomic nervous system function and mental health: brain derived neurotrophic factor (BDNF). In three independent studies in healthy academic volunteers (study I: German students, N=36; study II, German academic population sample, N=28; study III: Mexican students, N=115), BDNF protein expression or BDNF gene (BDNF) histone acetylation was determined. Simultaneously, mental distress and distress-associated somatic complaints were assessed by self-report. In study I, we found a negative correlation between hair-BDNF protein level and hair-cortisol as well as between hair-BDNF and somatic complaints, while hair-cortisol correlated positively with mental distress. In study II, we found a negative correlation between H4 histone acetylation at the BDNF gene P4-promoter and somatic complaints. Regression analysis confirmed confounder stability of associations in both studies. In study III, we confirmed study I and found lower hair-BDNF protein level in volunteers with high somatic complaints, who also reported higher mental distress during the end of term exams. The results indicate that BDNF protein levels can be detected in clipped hair and are associated with somatic complaints and stress in life. In addition, we concluded that plucked hair can provide material for the study of epigenetic changes in stress-affected tissues. These tools can prove valuable for future studies on distress, both under experimental and field conditions. Copyright © 2017. Published by Elsevier Ltd.

  2. Posttraumatic Stress Disorder and Mobile Health: App Investigation and Scoping Literature Review

    OpenAIRE

    Rodriguez-Paras, Carolina; Tippey, Kathryn; Brown, Elaine; Sasangohar, Farzan; Creech, Suzannah; Kum, Hye-Chung; Lawley, Mark; Benzer, Justin K

    2017-01-01

    Background Posttraumatic stress disorder (PTSD) is a prevalent mental health issue among veterans. Access to PTSD treatment is influenced by geographic (ie, travel distance to facilities), temporal (ie, time delay between services), financial (ie, eligibility and cost of services), and cultural (ie, social stigma) barriers. Objective The emergence of mobile health (mHealth) apps has the potential to bridge many of these access gaps by providing remote resources and monitoring that can offer d...

  3. Investigation of independent verification and validation of the servicemen occupational stress scale

    Directory of Open Access Journals (Sweden)

    Jia XU

    2012-12-01

    Full Text Available Objective  To examine the reliability and validity of the servicemen occupational stress scale. Methods  A survey with the servicemen occupational stress scale was carried out on 1100 randomly chosen military personnel in the army, and 106 among them also underwent examination with Chinese Military Mental Health Scale (CMMHS at the same time. Results  The Cronbach's α coefficient of total scale was 0.929, and subscales were 0.731-0.857 (P<0.01; the half reliability of total scale was 0.932, and subscales were 0.465-0.881 (P<0.01. The correlation coefficients among factors and between factors and total scale score were 0.699-0.900 (P<0.01. The factors of the servicemen occupational stress scale showed a significant correlation with most factors of the CMMHS, the correlation coefficients were 0.186-0253. According to the results of exploratory factor analysis, it was showed that the scale of the entries in the collation and factors named were more reasonable. According to the results of confirmatory factor analysis, there was a higher degree of accordance between the sample data and the hypothesized structure of factors, with Chi-Square statistic equal to 8293.0, RMSEA (root mean square error of approximation equal to 0.055, RMR (root mean square residual equal to 0.031, TLI (Tucker-Lewis index, CFI (comparative fit index, IFI (incremental fit index and GFI (goodness of fit index 0.919, 0.926, 0.920, 0.915, respectively. Conclusion  The reliability and validity of the servicemen occupational stress scale meet the standards for scale designing.

  4. Contact Lens Care

    Science.gov (United States)

    ... Consumers Consumer Information by Audience For Women Contact Lens Care Share Tweet Linkedin Pin it More sharing ... www.fda.gov/medwatch Learn More about Contact Lens Care Other Tips on Contact Lenses Decorative Contact ...

  5. The 2015 Gorkha earthquake investigated from radar satellites: Slip and stress modeling along the MHT

    Directory of Open Access Journals (Sweden)

    Faqi eDiao

    2015-10-01

    Full Text Available The active collision at the Himalayas combines crustal shortening and thickening, associated with the development of hazardous seismogenic faults. The 2015 Kathmandu earthquake largely affected Kathmandu city and partially ruptured a previously identified seismic gap. With a magnitude of Mw 7.8 as determined by the GEOFON seismic network, the 25 April 2015 earthquake displays uplift of the Kathmandu basin constrained by interferometrically processed ALOS-2, RADARSAT-2 and Sentinel-1 satellite radar data. An area of about 7,000 km² in the basin showed ground uplift locally exceeding 2 m, and a similarly large area (approx. 9000 km2 showed subsidence in the north, both of which could be simulated with a fault that is localized beneath the Kathmandu basin at a shallow depth of 5-15 km. Coulomb stress calculations reveal that the same fault adjacent to the Kathmandu basin experienced stress increase, similar as at sub-parallel faults of the thin skinned nappes, exactly at the location where the largest aftershock occurred (Mw 7.3 on 12. May, 2015. Therefore this study provides insights into the shortening and uplift tectonics of the Himalayas and shows the stress redistribution associated with the earthquake.

  6. Theoretical and Experimental Investigation of Characteristics of Single Fracture Stress-Seepage Coupling considering Microroughness

    Directory of Open Access Journals (Sweden)

    Shengtong Di

    2017-01-01

    Full Text Available Based on the results of the test among the joint roughness coefficient (JRC of rock fracture, mechanical aperture, and hydraulic aperture proposed by Barton, this paper deduces and proposes a permeability coefficient formula of single fracture stress-seepage coupling considering microroughness by the introduction of effect variables considering the microparticle size and structural morphology of facture surface. Quasi-sandstone fracture of different particle size is made by the laboratory test, and the respective modification is made on the coupled shear-seepage test system of JAW-600 rock. Under this condition, the laboratory test of stress-seepage coupling of fracture of different particle size is carried out. The test results show that, for the different particle-sized fracture surface of the same JRC, the permeability coefficient is different, which means the smaller particle size, the smaller permeability coefficient, and the larger particle size, the larger permeability coefficient; with the increase of cranny hydraulic pressure, the permeability coefficient increases exponentially, and under the same cranny hydraulic pressure, there is relation of power function between the permeability coefficient and normal stress. Meanwhile, according to the theoretical formula, the microroughness coefficient of the fractures with different particle size is obtained by the calculation, and its accuracy and validity are verified by experiments. The theoretical verification values are in good agreement with the measured values.

  7. [Investigation of the hyperspectral image characteristics of wheat leaves under different stress].

    Science.gov (United States)

    Zhang, Dong-Yan; Zhang, Jing-Cheng; Zhu, Da-Zhou; Wang, Ji-Hua; Luo, Ju-Hua; Zhao, Jin-Ling; Huang, Wen-Jiang

    2011-04-01

    The diagnosis of growing status and vigor of crops under various stresses is an important step in precision agriculture. Hyperspectral imaging technology has the advantage of providing both spectral and spatial information simultaneously, and has become a research hot spot. In the present study, auto-development of the pushbroom imaging spectrometer (PIS) was utilized to collect hyperspectral images of wheat leaves which suffer from shortage of nutrient, pest and disease stress. The hyperspectral cube was processed by the method of pixel average step by step to highlight the spectral characteristics, which facilitate the analysis based on the differences of leaves reflectance. The results showed that the hyperspectra of leaves from different layers can display nutrient differences, and recognize intuitively different stress extent by imaging figures. With the 2 nanometer spectral resolution and millimeter level spatial resolution of PIS, the number of disease spot can be qualitatively calculated when crop is infected with diseases, and, the area of plant disease could also be quantitatively analyzed; when crop suffered from pest and insect, the spectral information of leaves with single aphid and aphids can be detected by PIS, which provides a new means to quantitatively detect the aphid destroying of wheat leaf. The present study demonstrated that hyperspecral imaging has a great potential in quantitative and qualitative analysis of crop growth.

  8. Investigating inbreeding depression for heat stress tolerance in the model organism Drosophila melanogaster

    DEFF Research Database (Denmark)

    Pedersen, Kamilla Sofie; Pedersen, Louise Dybdahl; Sørensen, Anders Christian

    2012-01-01

    Mating between closely related individuals often causes reduced fitness, which is termed ‘inbreeding depression’. Inbreeding is, therefore, a threat towards the persistence of animal and plant populations. Here we present methods and results from a practical for high-school and first-year univers......Mating between closely related individuals often causes reduced fitness, which is termed ‘inbreeding depression’. Inbreeding is, therefore, a threat towards the persistence of animal and plant populations. Here we present methods and results from a practical for high-school and first......-year university students and discuss learning outcomes of the exercise as an example of inquiry-based science teaching. We use the model organism Drosophila melanogaster to test the ability of inbred and control (non-inbred) females to survive heat stress exposure. Flies were anaesthetised and collected...... into vials before exposure to 38°C heat stress in a water bath for 1 h. Half an hour later the number of comatose inbred and control flies were scored and chi-square statistic procedures were used to test for different degrees of heat stress tolerance between the two lines of flies. The practical introduces...

  9. sozialwissenInvestigating public places and impacts of heat stress in the city of Aachen, Germany

    Directory of Open Access Journals (Sweden)

    Maras, Isabell

    2014-04-01

    Full Text Available Understanding the role of structure and social aspects regarding heat stress of people in urban areas requires an interdisciplinary scientific approach that connects methods from both natural sciences and social sciences. In this study, we combine three approaches to provide an interdisciplinary analysis of the structure and social components of heat stress in the city of Aachen, Germany. First, we assess the overall spatial structure of the urban heat island using spatially distributed measurements from mobile air temperature recordings on public transport units combined with spatially distributed geo-statistical data. The results indicate that the time of day matters: During the afternoon, areas with a relative low building density, like the industrial area northeast of the inner city, are the warmest, while surfaces in high-building-density areas like the inner city heat up faster during the evening. Second, we combine these measurements with place-based survey data collected in 2010 from residents aged 50 to 92 regarding their individual housing conditions, medical history and social integration to examine the match among heat-based stress of older residents, social conditions and elevated temperatures in their residential quarter. We identify disadvantaged areas for specific already-disadvantaged demographic groups in the city, pointing to a cumulation of inequalities, including heat stress among the most vulnerable. Third, we compare data of biometeorological measurements on urban public squares during the afternoon with results of the micrometeorological model ENVI-met to examine the spatial variability of the inner-city heat load. We complement the modelling results with on-site interviews to evaluate people’s heat perception at the same public places. A simulation shows that additional vegetation would increase thermal comfort at these public places, whereby the heat load assessed using the predicted mean vote (PMV value would

  10. Preliminary Investigation of Workplace-Provided Compressed Mindfulness-Based Stress Reduction with Pediatric Medical Social Workers.

    Science.gov (United States)

    Trowbridge, Kelly; Mische Lawson, Lisa; Andrews, Stephanie; Pecora, Jodi; Boyd, Sabra

    2017-11-01

    Mindfulness practices, including mindfulness meditation, show promise for decreasing stress among health care providers. This exploratory study investigates the feasibility of a two-day compressed mindfulness-based stress reduction (cMBSR) course provided in the hospital workplace with pediatric health care social workers. The standard course of Jon Kabat-Zinn's MBSR requires a participant commitment to eight weeks of instruction consisting of one 2.5-hour-per-week class, a single day retreat, and 45 minutes of practice for six of seven days each week. Commitments to family, work, caregiving, education, and so on, as well as limitations such as distance, may prevent health care providers from participating in a standard MBSR course. Using t tests, researchers measured the effect of cMBSR on (a) positive and negative experiences in pediatric social work, (b) perceived stress, (c) mindfulness, and (d) caring self-efficacy (as a component of patient- and family-centered care). Results included significant differences between the pre- and post-intervention outcome variables on the Professional Quality of Life Secondary Traumatic Stress subscale, the Mindful Attention and Awareness Scale, and the Caring Efficacy Scale. Findings found adequate evidence for the feasibility of cMBSR design and for a need of a more rigorous study of the effects of the cMBSR intervention. © 2017 National Association of Social Workers.

  11. How do academic stress and leisure activities influence college students' emotional well-being? A daily diary investigation.

    Science.gov (United States)

    Zhang, Jieting; Zheng, Yao

    2017-10-01

    China has one of the largest bodies of college students who face growing academic stress that influences their well-being. Using a daily diary method in a group of Chinese college students (n = 139, mean age = 19.50 years, 27% males) who reported their daily positive and negative emotion consecutively for two weeks, this study investigated the dynamic relations between daily academic stress, leisure activities engagement, and emotion, and further examined the moderation of sex on these links. The results showed that at both between- and within-person level, academic stress was positively associated with negative emotion, and leisure activities engagement was positively associated with positive emotion. The association between leisure activities engagement and positive emotion were stronger among female students than among male students. These results suggest that effectively reducing academic stress and actively engaging in leisure activities are both important in promoting and enhancing daily emotional well-being. Copyright © 2017. Published by Elsevier Ltd.

  12. Changes of contact pressure and area in patellofemoral joint after different meniscectomies.

    Science.gov (United States)

    Bai, Bo; Shun, Hui; Yin, Zhi Xun; Liao, Zhuang-Wen; Chen, Ni

    2012-05-01

    We investigated the contact pressure and area of the patellofemoral joint both before and after different meniscectomies to provide a biomechanical basis for selecting meniscectomy and its clinical application for meniscus injuries. Six fresh cadaveric knees were used in the study. Using Staubli robots and an ultra-low-min-type pressure-sensitive tablet, changes in contact area and stress in the patellofemoral joint were measured at various flexion angles following different parts and degrees of meniscectomy. The patellofemoral contact area enlarged with the increase of knee flexion angle. From the values obtained from contact areas and average contact pressure of the patellofemoral joint, we found no significant difference between partial meniscectomy and intact knees, but a significant difference was found between total meniscectomy and intact knees. The contact area after lateral meniscectomy was statistically less than that of intact knees. The mean patellofemoral contact pressure after lateral meniscectomy was larger than in intact knees at each angle of flexion. No significant difference in contact area was observed between intact knees and medial meniscectomy. The average patellofemoral contact pressure after medial meniscectomy was larger than in intact knees from 0° ~ 30° of knee flexion, and no significant differences were found between intact knees and medial meniscectomy while knee bending from 60° to 90°. Different meniscectomies result in high contact pressure or disordered distribution of contact pressure, which may be the cause of postoperative patellofemoral degenerative arthrosis.

  13. Investigating the Effect of Drought Stress on Growth and distribution of Purple Nutsedge (Cyperus rotundus L.

    Directory of Open Access Journals (Sweden)

    N. Karimi Arpanahi

    2017-08-01

    Full Text Available Introduction: Drought is one of the most important and common environmental stresses in the country, which affect different stages of plant growth and development. Drought can affect plants growth in various ways, thereby reduces and delays germination, and decreases shoot growth and dry matter production. In the case of high water stress, it results showed great reductions in photosynthesis and disruption of the physiological processes, as well as growth stop and eventually plant death.Purple nutsedge (Cyperus rotundus L. has been listed as the world’s worst weed based onits worldwide distribution (92 countries and interference with over 50 crops. It causes high yield losses in fruiting vegetables and cucurbits in eastern and southeastern parts of Iran, where drought stress is a common phenomenon. Therefore, it is of utmost importance to understand the response of this noxious weed species to drought stress. Materials and Methods: In order to study the effect of drought stress on growth and distribution of purple nutsedge, two separate experiments were carried out in a randomized complete block design with three replications in the Research Greenhouse at Birjand University in 2013. The first experiment consisted of 6 irrigation interval levels (3, 6, 9, 12, 15 and 18- day irrigation intervals and the second one were 5 irrigation levels based on field capacity (12.5, 25, 50, 75 and 100 % FC. Results and Discussion: ANOVA results of both experiments showed that all growth characteristics of purple nutsedge were affected by drought stress. The results of irrigation interval stress experiment showed that the maximum height (76 cm, leaf area (110.83 cm2, stem number (4.66 stemperpot, shoot dry weight (4.132 gr per plant, tuber number (7.66 tuber per pot and total underground organs dry weight (4.435 gr per plant were observed in 3- day irrigation interval. Also, the lowest amount of these characteristics was obtained in 18- day irrigation interval

  14. An investigation into the effect of leadership style on stress-related presenteeism in South African knowledge workers

    Directory of Open Access Journals (Sweden)

    Reuben George

    2017-03-01

    Full Text Available Orientation: Leadership styles influence knowledge workers’ job-stress-related presenteeism (JSRP and, ultimately, organisational performance. Knowledge workers generally work under strict deadlines in fast-paced, stressful environments, and require organisational support. Research purpose: The objective of this study was to examine empirically the effect of three leadership styles, namely transformational, transactional and laissez-faire, on job-relatedstress presenteeism in knowledge workers across a number of industries in South Africa. Motivation for the study: Absenteeism has been the subject of much investigation but more research is required into the antecedents and consequences of presenteeism, the phenomenon of employees being physically present at work, but not fully functional and therefore unproductive. Illness as an antecedent to presenteeism has been studied, but limited attention has been given to presenteeism caused by stress. There are very few studies that investigate leadership styles as antecedents for JSRP and this study therefore sets out to provide quantitative evidence of this relationship. Research design, approach and method: The researchers used a cross-sectional quantitative approach within the positivism research philosophy. Two questionnaires were administered: the multifactor leadership questionnaire form 6S and the job-related-stress presenteeism questionnaire. Descriptive statistics and Pearson’s product-moment correlation were used to answer the research questions. The participants (N = 242 were knowledge workers, representing 12 widely categorised industries. The researchers analysed job role descriptions to ensure the respondents were all knowledge workers. Main findings: Transformational leadership has a higher negative correlation with JSRP than does transactional leadership, whereas laissez-faire leadership has no significant relationship with job stress or JSRP. Practical/managerial implications: The

  15. Influence of growth stresses and material properties on distortion of sawn timber - numerical investigation

    DEFF Research Database (Denmark)

    Johansson, Marie; Ormarsson, Sigurdur

    2009-01-01

    The board distortion that occurs during the sawing and the drying process causes major problems in the utilisation of sawn timber. The distortion is highly influenced by parameters such as spiral grain angle, modulus of elasticity, shrinkage, growth stresses and sawing pattern. In this study...... a finite element simulation of log sawing and timber drying was performed to study how these parameters interact to affect board distortion. A total of 81 logs with different material combinations were simulated. From each simulated log four boards with different annual ring orientation were studied...

  16. Fractographic investigation of stress corrosion cracking of steels for high-strength bolts

    International Nuclear Information System (INIS)

    Gladshtejn, L.I.; Goritskij, V.M.; Evtushenko, N.A.; Sokolov, S.P.; Panfilova, L.M.

    1980-01-01

    By the methods of quantitative fractography studied is the effect of chemical composition on stress corrosion cracking resistance in the mean agressive medium (pH=2.2) and the fracture structure of cylindrical delta samples with the notch (K=2.75) of high-strength chromium steel. It is shown that the alloying of the 40 steel with Cr, Si, V increases its strength under short-time loading but leads to forming of brittle areas in fracture under long time effect of corrosion medium

  17. Evaluation of non-radioactive endpoints of ex vivo local lymph node assay-BrdU to investigate select contact sensitizers.

    Science.gov (United States)

    Ulker, Ozge Cemiloglu; Ates, Ilker; Atak, Aysegul; Karakaya, Asuman

    2013-01-01

    The present study sought to verify the utility of the non-radioactive endpoints LLNA BrdU (5-bromo-2'-deoxyuridine) ex vivo incorporation and cytokine release using auricular lymph node cells isolated from BALB/c mice topically treated with a strong (formaldehyde or p-phenylene-diamine [PPD]), moderate sensitizer (cinnamal), or weak sensitizer (eugenol). Stimulation index (SI) and EC₃ values were calculated for each agent. Based on the results of ex vivo LLNA-BrdU assays, EC₃ values were calculated to be 0.29, 0.09, 1.91, and 16.60% for formaldehyde, PPD, cinnamal, and eugenol, respectively. These results were in good agreement with data from previous standard radioactive LLNA. Cytokine analyses indicated T(H)1 and T(H)2 cytokine involvement in the regulation of murine contact allergy and these could be utilized as endpoints in assessments of contact allergy in mice. In conclusion, the current study provided evidence that the non-radioactive endpoint LLNA BrdU ex vivo incorporation could be of use as a viable alternative approach to assess the skin sensitization potential of test compound with respect to improving animal welfare. This is of particular importance in the case of any laboratory where it might be difficult to handle and/or readily employ radioisotopes. Further studies will be required to confirm--across test agents--the reproducibility as well as the limits of utility of this new ex vivo BrdU method.

  18. [Determination of joint contact area using MRI].

    Science.gov (United States)

    Yoshida, Hidenori; Kobayashi, Koichi; Sakamoto, Makoto; Tanabe, Yuji

    2009-10-20

    Elevated contact stress on the articular joints has been hypothesized to contribute to articular cartilage wear and joint pain. However, given the limitations of using contact stress and areas from human cadaver specimens to estimate articular joint stress, there is need for an in vivo method to obtain such data. Magnetic resonance imaging (MRI) has been shown to be a valid method of quantifying the human joint contact area, indicating the potential for in vivo assessment. The purpose of this study was to describe a method of quantifying the tibiofemoral joint contact area using MRI. The validity of this technique was established in porcine cadaver specimens by comparing the contact area obtained from MRI with the contact area obtained using pressure-sensitive film (PSF). In particular, we assessed the actual condition of contact by using the ratio of signal intensity of MR images of cartilage surfaces. Two fresh porcine cadaver knees were used. A custom loading apparatus was designed to apply a compressive load to the tibiofemoral joint. We measured the contact area by using MRI and PSF methods. When the ratio of signal intensity of the cartilage surface was 0.9, the error of the contact area between the MR image and PSF was about 6%. These results suggest that this MRI method may be a valuable tool in quantifying joint contact area in vivo.

  19. Determination of joint contact area using MRI

    International Nuclear Information System (INIS)

    Yoshida, Hidenori; Kobayashi, Koichi; Sakamoto, Makoto; Tanabe, Yuji

    2009-01-01

    Elevated contact stress on the articular joints has been hypothesized to contribute to articular cartilage wear and joint pain. However, given the limitations of using contact stress and areas from human cadaver specimens to estimate articular joint stress, there is need for an in vivo method to obtain such data. Magnetic resonance imaging (MRI) has been shown to be a valid method of quantifying the human joint contact area, indicating the potential for in vivo assessment. The purpose of this study was to describe a method of quantifying the tibiofemoral joint contact area using MRI. The validity of this technique was established in porcine cadaver specimens by comparing the contact area obtained from MRI with the contact area obtained using pressure-sensitive film (PSF). In particular, we assessed the actual condition of contact by using the ratio of signal intensity of MR images of cartilage surfaces. Two fresh porcine cadaver knees were used. A custom loading apparatus was designed to apply a compressive load to the tibiofemoral joint. We measured the contact area by using MRI and PSF methods. When the ratio of signal intensity of the cartilage surface was 0.9, the error of the contact area between the MR image and PSF was about 6%. These results suggest that this MRI method may be a valuable tool in quantifying joint contact area in vivo. (author)

  20. Theoretical and experimental investigation of shock wave stressing of metal powders by an explosion

    Directory of Open Access Journals (Sweden)

    Lukyanov Ya.L.

    2011-01-01

    Full Text Available Joint theoretical and experimental investigations have allowed to realize an approach with use of mathematical and physical modeling of processes of a shock wave loading of powder materials. Hugoniot adiabats of the investigated powder have been measured with a noncontact electromagnetic method. The mathematical model of elastic-plastic deformation of the powder media used in the investigation has been validated. Numerical simulation of shock wave propagation and experimental assembly deformation has been performed.

  1. Investigation and evaluation of stress-corrosion cracking in piping of light water reactor plants

    International Nuclear Information System (INIS)

    1979-01-01

    In 1975, a Pipe Cracking Study Group, established by the United States Nuclear Regulatory Commission (USNRC), reviewed intergranular stress-corrosion cracking (IGSCC) in Bioling Water Reactors (BWRs) and issued a report. During 1978, IGSCC was reported for the first time in large-diameter piping (> 20 in.) in a BWR in Germany. This discovery, together with the reported questions concerning the interpretation of ultrasonic inspections, led to the activation of a new Pipe Crack Study Group (PCSG) by USNRC. The charter of the new PCSG was expanded: (1) to include review of potential for stress-corrosion cracking in Pressurized Water Reactors (PWRs) as well as BWRs, (2) to examine operating experience in foreign reactors relevant to IGSCC, and (3) to study five specific questions. The PCSG limited the scope of the study to BWR and PWR piping runs and safe ends attached to the reactor pressure vessel. Not considered were components such as the reactor pressure vessel, pumps, valves, steam generators, large steam turbines, etc. Throughout this report, as well as in the title, the safe ends are arbitrarily defined as piping

  2. An Investigation of the Relationship between Spiritual Health and Depression, Anxiety, and Stress in Patients with Heart Failure

    Directory of Open Access Journals (Sweden)

    Mahbobe Safavi

    2016-06-01

    Full Text Available Background and Objectives: Heart failure is a life-threatening illness in which panic disorder, anxiety, depression, and death expectation are constantly experienced. This study, thus, determined to examine the relationship between spiritual health and depression, anxiety, and stress in patients with heart failure. Methods: This study was a descriptive-correlational investigation that was performed on 150 patients with heart failure in selected Ardabil teaching hospitals in 2014. Data was collected using Demographic Questionnaire, Ellison-Paloutzian Spiritual Well-Being Scale, and Depression, Anxiety, and Stress Scale (DASS-21. They were, then, analyzed using SPSS, descriptive statistical method, Pearson’s correlation coefficient, and multivariable regression analysis. Results: The results of this study showed that the spiritual wellbeing level of most subjects (75.3% was in the range of medium. Mean scores of religious and existential aspects of spiritual well-being were obtained to be 33.26±1.247 and 45.76±1.328, respectively. In addition, depression, anxiety, and stress levels of most research units were in the medium range. Pearson’s correlation coefficient showed that there was a statistically significant relationship between depression, anxiety, and stress in all aspects of spiritual wellbeing (r=-0.592, P<0.01. Conclusion:  Results indicated that an increase in spiritual health would be a concomitant of a reduction in depression, anxiety, and stress levels in heart failure patients. Based on the results and importance of spiritual health, an improvement of proficiencies of medical and paramedical communities in offering spiritual healthcares appears to be mandatory.

  3. Pizza makers' contact dermatitis.

    Science.gov (United States)

    Lembo, Serena; Lembo, Claudio; Patruno, Cataldo; Balato, Anna; Balato, Nicola; Ayala, Fabio

    2014-01-01

    Contact eczema to foods, spices, and food additives can occur in occupational and nonoccupational settings in those who grow, handle, prepare, or cook food. Pizza is one of the most eaten foods in every continent, and pizza making is a common work in many countries. We aimed to evaluate the occurrence and the causes of contact dermatitis in pizza makers in Naples. We performed an observational study in 45 pizza makers: all the enrolled subjects had to answer a questionnaire designed to detect personal history of respiratory or cutaneous allergy, atopy; work characteristics and timing were also investigated. Every subject attended the dermatology clinic for a complete skin examination, and when needed, patients were patch tested using the Italian baseline series of haptens integrated with an arbitrary pizza makers series. Our results reported that 13.3% of the enrolled pizza makers (6/45) presented hand eczema, and that 8.9% (4/45) were affected by occupational allergic contact dermatitis. Diallyl disulfide and ammonium persulfate were the responsible substances. Performing patch tests in pizza makers and food handlers affected by hand contact dermatitis is useful. We propose a specific series of haptens for this wide working category.

  4. Experimental investigation of stresses and deformations of the model of a pod-boiler-prestressed concrete pressure vessel. Pt. 1

    International Nuclear Information System (INIS)

    Stoever, R.

    1973-01-01

    Investigations of elastic models are suitable to obtain independent values for stress states and deformations of thickwalled pressure vessels to check computer programs for three-dimensional elastic calculations. An elastic model of epoxy resin was constructed with the geometry of the pod boiler pressure vessel of the Hartlepool nuclear power station. With this model strains and deformations were measured for internal pressure. The stress states in the neighbourhood of the large vertical openings for the boiler pods and the horizontal gas ducts and at the junction of cylinder and plates were of special interest. Therefore most of the gauges were concentrated in these regions. A considerable number of strain gauges were embedded in the wall. The construction of the model is described in part one and results of the measurements are presented and discussed in part two of this report. (orig.) [de

  5. Numerical investigation on the variation of welding stresses after material removal from a thick titanium alloy plate joined by electron beam welding

    International Nuclear Information System (INIS)

    Liu, Chuan; Zhang, Jianxun; Wu, Bing; Gong, Shuili

    2012-01-01

    Highlights: → After less materials removal from the top, stresses on the bottom remain unchanged. → The transverse stress within the weld decreases significantly with material removal. → Local material removal does not influence the longitudinal stress significantly. -- Abstract: The stress modification after material removal from a 50 mm thick titanium alloy plate jointed by electron beam welding (EBW) was investigated through the finite element method (FEM). The welding experiment and milling process were carried out to experimentally determine the stresses induced by EBW and their modification after local material removal. The modification of as-welded stresses due to the local material removal method and the whole layer removal method was discussed with the finite element analysis. Investigated results showed that with less materials removal from the top, the stresses on the bottom surface remain almost unchanged; after material removal from the top and bottom part, the transverse stress on the newly-formed surface decreases significantly as compared to the as-welded stresses at the same locations; however, the stress modification only occurs at the material removal region in the case of local region removal method; the longitudinal stress decreases with the whole layer removal method while remains almost unchanged with the local region removal method.

  6. Are Trauma Memories Disjointed from other Autobiographical Memories in Posttraumatic Stress Disorder? An Experimental Investigation

    Science.gov (United States)

    Kleim, Birgit; Wallott, Franziska; Ehlers, Anke

    2008-01-01

    This study tested the hypothesis that trauma memories are disjointed from other autobiographical material in posttraumatic stress disorder (PTSD). Assault survivors with (n = 25) and without PTSD (n = 49) completed an autobiographical memory retrieval task during script-driven imagery of (a) the assault and (b) an unrelated negative event. When listening to a taped imagery script of the worst moment of their assault, survivors with PTSD took longer to retrieve unrelated non-traumatic autobiographical information than those without PTSD, but not when listening to a taped script of the worst moment of another negative life event. The groups also did not differ in general retrieval latencies, neither at baseline nor after the imagery tasks. The findings are in line with suggestions that traumatic memories are less integrated with other autobiographical information in trauma survivors with PTSD than in those without PTSD. PMID:21241538

  7. Investigation of Stress Corrosion Cracking in Magnesium Alloys by Quantitative Fractography Methods

    Directory of Open Access Journals (Sweden)

    Sozańska M.

    2017-06-01

    Full Text Available The article shows that the use of quantitative fracture description may lead to significant progress in research on the phenomenon of stress corrosion cracking of the WE43 magnesium alloy. Tests were carried out on samples in air, and after hydrogenation in 0.1 M Na2SO4 with cathodic polarization. Fracture surfaces were analyzed after different variants of the Slow Strain Rate Test. It was demonstrated that the parameters for quantitative evaluation of fracture surface microcracks can be closely linked with the susceptibility of the WE43 magnesium alloy operating under complex state of the mechanical load in corrosive environments. The final result of the study was the determination of the quantitative relationship between Slow Strain Rate Test parameters, the mechanical properties, and the parameters of the quantitative evaluation of fracture surface (microcracks.

  8. Contact stress by the method of finite elements of the steel AISI 1045 hardened by roller; Tensiones de contacto por el metodo de elementos finitos del acero AISI 1045 endurecido por rodillo

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez-columbie, T.; Rodriguez-Gonzalez, I.; Alcantara-Borges, D.; Fernandez-Guilarte, E.

    2012-11-01

    In this paper, the tense-deformational behavior is analyzed by means of simulation using the finite element method for AISI 1045 cold rolled deformed steel. ANYSYS V.10 software was used in this study. Revolution number, compressive strength and tool feed rate were the variables considered in the deformation process. They allowed determining the contact stress of the deformed material. The material used was 30 mm diameter and 100 mm length. Samples of 30 mm diameter and 3 mm thickness were prepared for the optical microscopic observation, which were compared to the results obtained from the simulation. The tensile status of the deformed samples was evaluated as from the reduction of the average size of the grains as per the strength applied. This study intends to show that the cold hardening method is a surface hardening option. (Author)

  9. Specificity of posttraumatic stress disorder symptoms: an investigation of comorbidity between posttraumatic stress disorder symptoms and depression in treatment-seeking veterans.

    Science.gov (United States)

    Gros, Daniel F; Simms, Leonard J; Acierno, Ron

    2010-12-01

    In response to high levels of comorbidity and symptom overlap between posttraumatic stress disorder (PTSD), major depressive disorder (MDD), and other disorders, much attention has been devoted to the role of specific and nonspecific symptoms among the disorders. The present study investigated the overlapping symptoms of PTSD and MDD in treatment-seeking veterans. Exploratory factor analyses were used to identify latent factors of both self-reported and clinician-rated symptoms of PTSD and MDD. Results of exploratory factor analyses supported a 2-factor model representing symptoms of depression and PTSD; however, a subset of PTSD symptoms, characterized by emotional numbing and dysphoria, loaded onto the depression factor, rather than the PTSD factor. These nonspecific PTSD symptoms were predictive of comorbid MDD and increased depression symptomatology in patients with PTSD. Together, these findings demonstrate the importance of accounting for nonspecific symptoms in diagnosis and treatment of PTSD, highlighting a need for revisions to our current diagnostics.

  10. Proteomic investigation of the ventral rat hippocampus links DRP-2 to escitalopram treatment resistance and SNAP to stress resilience in the chronic mild stress model of depression

    DEFF Research Database (Denmark)

    Bisgaard, Christina; Jayatissa, Magdalena N; Enghild, Jan J

    2007-01-01

    etiology and recovery. Thus two-dimensional differential in-gel electrophoresis was employed to compare the ventral hippocampal proteomes between different treatment groups in the chronic mild stress (CMS) model of depression. The CMS paradigm induces anhedonic behaviour, which is a major symptom......The development of depression as well as recovery from depression is most likely accompanied by a change in protein expression profiles. The purpose of the present study was to quantitatively investigate global protein expression differences independent of any hypothesis describing depression...... of depression, by exposing rats to a series of mild stressors for 7 weeks, with antidepressant treatment during the last 4 weeks. In the CMS model, animals were split into six different groups at the end of treatment; unchallenged control escitalopram (n = 12), unchallenged control vehicle (n = 12), CMS vehicle...

  11. Occupational contact urticaria and protein contact dermatitis.

    Science.gov (United States)

    Doutre, Marie-Sylvie

    2005-01-01

    Irritant dermatitis and eczema are the most prevalent occupational skin diseases. Less common are immediate contact reactions such as contact urticaria and protein contact dermatitis. Occupational contact urticaria can be subdivided into two categories, immunological and non immunological. However, some agents can induce these two types of reactions. Contact urticaria to natural rubber latex is particularly frequent among health care personnel, but contact urticaria to a wide variety of other substances occurs in many other occupations. Among those at risk are cooks, bakers, butchers, restaurant personnel, veterinarians, hairdressers, florists, gardeners, and forestry workers. Protein contact dermatitis in some of these occupations is caused principally by proteins of animal or plant origin, especially among individuals with a history of atopic dermatitis. Diagnosis requires careful interrogation, clinical examination and skin tests (open tests and prick tests with immediate lecture) to identify a particular contact allergen.

  12. Contact fatigue in rolling-element bearings

    CSIR Research Space (South Africa)

    Fernandes, PJL

    1997-06-01

    Full Text Available to the "cyclone pitting effect" also observed in gear teeth \\[1\\]. The initiation of surface cracks under rollin~sliding contact can be significantly accelerated by the presence of stress concentration sites on the contact surf... formed by rolling and rollin~sliding contact fatigue may progress to form a more severe form of damage known as flaking \\[3\\]. This results in the formation of large, irregular pits which cause rapid deterioration...

  13. Preliminary investigation of the structural influence of entry-entry intersections and inhomogeneous initial-stress fields on repository disposal rooms

    International Nuclear Information System (INIS)

    Loken, M.C.

    1983-07-01

    The structural influence of entry-entry intersections and inhomogeneous initial stress fields on a repository configuration has been investigated. The out-of-plane stress increases rapidly into the pillar from the rib of the connecting corridor to the plane strain value within one pillar width of the intersection, indicating that a two-dimensional analysis is valid over a major portion of the disposal room and pillar. Inhomogeneous initial stress fields do not significantly alter the trends of the resulting post-excavation stress fields. However, the magnitude of the vertical stress and the effective stress is slightly greater near the corner at the intersection. Further nonlinear analyses are required to assess the stability of the pillar at the intersection because of the high deviatoric stresses occurring in that region. 6 references

  14. Stress in the caregivers of Alzheimer's patients: an experimental investigation in Italy.

    Science.gov (United States)

    Aguglia, E; Onor, M L; Trevisiol, M; Negro, C; Saina, M; Maso, E

    2004-01-01

    In Italy, the family constitutes the major caregiving response to the needs of the elderly who are no longer self-sufficient. These caregivers are often wives or daughters who have chosen to keep the patient at home with them. On average, three-quarters of the caregiver's day is devoted to the patient, a proportion that tends to increase linearly as the disease progresses. The primary aim of our study was to describe a group of Italian caregivers of patients with a diagnosis of dementia to assess their levels of stress. We then correlated these caregivers with a number of sociodemographic variables and the patients' degree of cognitive impairment and independence in daily life activities. The study was conducted on a sample group of 236 caregivers of patients with a diagnosis of Alzheimer's disease (AD) according to the DSM-IV criteria. Each caregiver took part in a sociodemographic interview and filled in two questionnaires: the Caregiver Burden Inventory (CBI), to quantify the caregiving workload and the Brief Symptom Inventory (BSI), to assess the level of anxiety and depression. Patients were administered the Mini-Mental State Examination (MMSE) to evaluate their level of cognitive impairment and the Instrumental Activities of Daily Living (IADL) and Activities of Daily Living (ADL) tests to quantify their level of independence. The analysis of the results shows that the average Italian caregiver of an AD patient is a woman, approximately 60 years old. The majority of caregivers are spouses, followed by children. In general, these caregivers work at home, are housewives or retired, and are personally involved in caring for the patients. The greater the level of a patient's cognitive impairment and the less independent they are, the greater amount of care and supervision they require, leaving less free time for the caregiver; this leads to higher levels of anxiety related to caregiving. Toward the final stages of the disease, patient care tasks take up nearly

  15. INVESTIGATION OF NONAXISYMMETRIC STRESS STATE FOR QUASI-STATIC THERMAL POWER LOADING UNDER CONDITIONS OF HIGHEST-ENERGY PARTICLE IRRADIATION

    Directory of Open Access Journals (Sweden)

    A. V. Chigarev

    2013-01-01

    Full Text Available The paper contains a virtual modeling 2D(r, θ for deformation of singly-connected cylindrical solid under conditions of thermo-irradiation impact. Influence of a circumferential distortion on nonaxisymmetric strain-stress state for various values of temperature amplitudes has been investigated in the paper. A solid cylinder  with internal heat sources has been considered as a model body. Properties of the model body correspond to cermet fuel (40 % UO2 + 60 % Cr. 

  16. Investigation of the Use of Laser Shock Peening for Enhancing Fatigue and Stress Corrosion Cracking Resistance of Nuclear Energy Materials

    Energy Technology Data Exchange (ETDEWEB)

    Vasudevan, Vijay K. [Univ. of Cincinnati, OH (United States); Jackson, John [Idaho National Lab. (INL), Idaho Falls, ID (United States); Teysseyre, Sebastien [Idaho National Lab. (INL), Idaho Falls, ID (United States); Alexandreanu, Bogdan [Argonne National Lab. (ANL), Argonne, IL (United States); Chen, Yiren [Argonne National Lab. (ANL), Argonne, IL (United States)

    2017-03-07

    The objective of this project, which includes close collaboration with scientists from INL and ANL, is to investigate and demonstrate the use of advanced mechanical surface treatments like laser shock peening (LSP) and ultrasonic nanocrystal surface modification (UNSM) and establish baseline parameters for enhancing the fatigue properties and SCC resistance of nuclear materials like nickel-based alloy 600 and 304 stainless steel. The research program includes the following key elements/tasks: 1) Procurement of Alloy 600 and 304 SS, heat treatment studies; 2) LSP and UNSM processing of base metal and welds/HAZ of alloys 600 and 304; (3) measurement and mapping of surface and sub-surface residual strains/stresses and microstructural changes as a function of process parameters using novel methods; (4) determination of thermal relaxation of residual stresses (macro and micro) and microstructure evolution with time at high temperatures typical of service conditions and modeling of the kinetics of relaxation; (5) evaluation of the effects of residual stress, near surface microstructure and temperature on SCC and fatigue resistance and associated microstructural mechanisms; and (6) studies of the effects of bulk and surface grain boundary engineering on improvements in the SCC resistance and associated microstructural and cracking mechanisms

  17. Comparative Investigations on the Stress Corrosion Behavior of α -Al Bronze and α Brass in Sodium Nitrite

    International Nuclear Information System (INIS)

    Ashour, E.A.

    1995-01-01

    The stress corrosion behavior of α- Aluminum bronze (copper [Cu] -7% Al) (UNS C 61400) has been investigated as compared to α- brass under slow strain in sodium nitrite solutions under open - circuit and different anodic potentials. While α- brass was quite susceptible to SCC, α- Al bronze was found to be resistant to SCC. The ratios of time to failure in solution to that in air and of maximum stress in solution to that in air decreased sharply with increase of anodic potential for α-brass but remained virtually constant for α- Al bronze. The mode of failure was predominantly ductile for α- Al bronze under various conditions. The stress corrosion cracking of α - brass has been shown to be promoted by relatively concentrated Na N O 2 and high anodic potentials. Previous explanations for the change of the mode of failure from intergranular at open circuit potential (OCP) to transgranular cracking under anodic potential were confirmed. The bronzes resistance to SCC was attributed to the presence of Al 2 O 3 on the alloy surface. 10 Figs

  18. Investigation on the electrical characteristics of a pentacene thin-film transistor and its reliability under positive drain bias stress

    International Nuclear Information System (INIS)

    Fan, Ching-Lin; Chiu, Ping-Cheng; Lin, Yu-Zuo; Yang, Tsung-Hsien; Chiang, Chin-Yuan

    2011-01-01

    This study systematically investigates the effects of pentacene deposition rates and channel lengths on the electrical characteristics of pentacene-based organic thin-film transistors (OTFTs), and the performance degradation of OTFTs under the positive drain bias stress. With a slower deposition rate of the pentacene channel layer, the larger grain size is formed, and it improves the performance of pentacene-based OTFTs. As the channel length decreases, the threshold voltage (V TH ) shifts toward the positive direction and the field-effect mobility (µ FE ) decreases, which are due to the drain-induced barrier lowering effect and the lower mobility in the active channel near the region of source/drain electrodes, respectively. In addition, we also propose a mechanism to present the channel length dependence on the field-effect mobility. Results also show that the pentacene-based OTFTs, which are under positive drain bias stress, exhibit greater performance degradation than those under negative drain bias stress. The greater performance degradation, the decreasing I ON and the larger V TH shift are due to the greater trap state density (N trap ) created in the bulk channel by the large lateral electrical field and the carriers injected into the gate insulator by the large vertical electrical field, respectively

  19. Investigating the Relationship between Job Stress and its Coping Strategies with Marital and Job Satisfaction among Female Employees of Islamic Azad University, Kazeroon Branch

    OpenAIRE

    MOTAHARI, Seyedeh Soraya; AIBAGHI ESFAHANI, Saeed

    2015-01-01

    Abstract. This study investigated the relationship between job stress and marital satisfaction of women in Islamic Azad University, Kazeroon Brach. Two job stress questionnaires of Philip L. Rice (1992) and marital satisfaction questionnaire of Enrich (1997) were completed and examined by female employees of the Islamic Azad University, Kazeroon Brach, who were selected randomly. The results showed that women have job stress. The results showed that there is a negative correlation coefficient...

  20. Contact allergy to lanolin

    DEFF Research Database (Denmark)

    Fransen, Marloes; Overgaard, Line E K; Johansen, Jeanne D

    2018-01-01

    BACKGROUND: Lanolin has been tested as lanolin alcohols (30% pet.) in baseline patch test series since 1969, and this has shown clinically relevant allergic contact dermatitis cases. OBJECTIVES: To investigate the temporal development of lanolin allergy (i.e. positive reaction to lanolin alcohols...... and/or Amerchol™ L-101), and the association between contact allergy to lanolin and patient characteristics from the MOAHLFA index. METHODS: A retrospective observational study of consecutively patch tested dermatitis patients (n = 9577) between 1 January 2004 and 31 December 2015 with lanolin...... alcohols 30% pet. and Amerchol™ L-101 50% pet. was performed. RESULTS: The prevalence of lanolin allergy increased from 0.45% in 2004 to 1.81% in 2015. In age-adjusted and sex-adjusted analyses, weak, significant associations were found between atopic dermatitis and lanolin and lanolin alcohols allergy...

  1. Experimental Investigation on Shock Mechanical Properties of Red Sandstone under Preloaded 3D Static Stresses

    Directory of Open Access Journals (Sweden)

    Niu Yong

    2015-11-01

    Full Text Available Triaxial impact mechanical performance experiment was performed to study the mechanical properties of red sandstone subjected to three-dimensional (3D coupled static and dynamic loads, i.e., three confining pressures (0, 5, and 10 MPa and three axial pressures (11, 27, and 43 MPa. A modified 3D split Hopkinson pressure bar testing system was used. The change trend in the deformation of red sandstone and the strength and failure modes under axial pressures and confining pressures were analyzed. Results show that, when the confining pressure is constant, the compressive strength, secant modulus, and energy absorbed per unit volume of red sandstone initially increases and subsequently decreases, whereas the average strain rate exhibits an opposite trend. When the axial pressure is constant, both the compressive strength and secant modulus of red sandstone are enhanced, but the average strain rate is decreased with increasing confining pressure. The energy absorbed per unit volume is initially increased and subsequently decreased as the confining pressure increases. Red sandstone exhibits a cone-shaped compression–shear failure mode under the 3D coupled static and dynamic loads. The conclusions serve as theoretical basis on the mechanical properties of deep medium-strength rock under a high ground stress and external load disturbance condition

  2. Investigating the running abilities of Tyrannosaurus rex using stress-constrained multibody dynamic analysis

    Directory of Open Access Journals (Sweden)

    William I. Sellers

    2017-07-01

    Full Text Available The running ability of Tyrannosaurus rex has been intensively studied due to its relevance to interpretations of feeding behaviour and the biomechanics of scaling in giant predatory dinosaurs. Different studies using differing methodologies have produced a very wide range of top speed estimates and there is therefore a need to develop techniques that can improve these predictions. Here we present a new approach that combines two separate biomechanical techniques (multibody dynamic analysis and skeletal stress analysis to demonstrate that true running gaits would probably lead to unacceptably high skeletal loads in T. rex. Combining these two approaches reduces the high-level of uncertainty in previous predictions associated with unknown soft tissue parameters in dinosaurs, and demonstrates that the relatively long limb segments of T. rex—long argued to indicate competent running ability—would actually have mechanically limited this species to walking gaits. Being limited to walking speeds contradicts arguments of high-speed pursuit predation for the largest bipedal dinosaurs like T. rex, and demonstrates the power of multiphysics approaches for locomotor reconstructions of extinct animals.

  3. Occupational protein contact dermatitis.

    Science.gov (United States)

    Barbaud, Annick; Poreaux, Claire; Penven, Emmanuelle; Waton, Julie

    2015-01-01

    Occupational contact dermatitis is generally caused by haptens but can also be induced by proteins causing mainly immunological contact urticaria (ICU); chronic hand eczema in the context of protein contact dermatitis (PCD). In a monocentric retrospective study, from our database, only 31 (0.41%) of patients with contact dermatitis had positive skin tests with proteins: 22 had occupational PCD, 3 had non-occupational PCD, 5 occupational ICU and 1 cook had a neutrophilic fixed food eruption (NFFE) due to fish. From these results and analysis of literature, the characteristics of PCD can be summarized as follows. It is a chronic eczematous dermatitis, possibly exacerbated by work, suggestive if associated with inflammatory perionyxix and immediate erythema with pruritis, to be investigated when the patient resumes work after a period of interruption. Prick tests with the suspected protein-containing material are essential, as patch tests have negative results. In case of multisensitisation revealed by prick tests, it is advisable to analyse IgE against recombinant allergens. A history of atopy, found in 56 to 68% of the patients, has to be checked for. Most of the cases are observed among food-handlers but PCD can also be due to non-edible plants, latex, hydrolysed proteins or animal proteins. Occupational exposure to proteins can thus lead to the development of ICU. Reflecting hypersensitivity to very low concentrations of allergens, investigating ICU therefore requires caution and prick tests should be performed with a diluted form of the causative protein-containing product. Causes are food, especially fruit peel, non-edible plants, cosmetic products, latex, animals.

  4. Study on the fatigue crack initiation life under spherical contact

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Yong Joo; Kim, Tae Wan [Busan National Univ., Busan (Korea, Republic of); Lee, Mun Ju [Samsung Electronics Co., Ltd., Suwon (Korea, Republic of)

    2001-08-01

    In case of contact fatigue, the accurate calculation of surface tractions and subsurface stress is essential to the prediction of crack initiation life. Surface tractions influencing shear stress amplitude have been obtained by contact analysis based on influence function. Subsurface stress has been obtained by using rectangular patch solutions. In this study, to simulate asperity contact under sliding condition, the tip of asperity was simulated by sphere and to calculate crack initiation life in the substrate, dislocation pileup theory was used.

  5. Study on the fatigue crack initiation life under spherical contact

    International Nuclear Information System (INIS)

    Cho, Yong Joo; Kim, Tae Wan; Lee, Mun Ju

    2001-01-01

    In case of contact fatigue, the accurate calculation of surface tractions and subsurface stress is essential to the prediction of crack initiation life. Surface tractions influencing shear stress amplitude have been obtained by contact analysis based on influence function. Subsurface stress has been obtained by using rectangular patch solutions. In this study, to simulate asperity contact under sliding condition, the tip of asperity was simulated by sphere and to calculate crack initiation life in the substrate, dislocation pileup theory was used

  6. Mechanoluminescent Contact Type Sensor

    Directory of Open Access Journals (Sweden)

    A. K. Yefremov

    2017-01-01

    Full Text Available Mechanoluminescent sensing elements convert mechanical stress into optical radiation. Advantages of such sensors are the ability to generate an optical signal, solid-state, simple structure, and resistance to electromagnetic interference. Mechanoluminescent sensor implementations can possess the concentrated and distributed sensitivity, thereby allowing us to detect the field of mechanical stresses distributed across the area and in volume. Most modern semiconductor photo-detectors can detect mechanoluminescent radiation, so there are no difficulties to provide its detection when designing the mechanoluminescent sensing devices. Mechanoluminescent substances have especial sensitivity to shock loads, and this effect can be used to create a fuse the structure of which includes a target contact type sensor with a photosensitive actuator. The paper briefly describes the theoretical basics of mechanoluminiscence: a light signal emerges from the interaction of crystalline phosphor luminescence centers with electrically charged dislocations, moving due to the deformation of the crystal. A mathematical model of the mechanoluminescent conversion is represented as a functional interaction between parameters of the mechanical shock excitation and the sensor light emission. Examples of computing the optical mechanoluminescent output signal depending on the duration and peak level of impulse load are given. It is shown that the luminous flux, generated by mechanoluminescent sensing element when there is an ammunition-target collision causes the current emerging in photo-detector (photodiode that is sufficient for a typical actuator of the fuse train to operate. The potential possibility to create a contact target type sensor based on the light-sensitive mechanoluminescent sensor was proved by the calculation and simulation results.

  7. Analytical, Numerical, and Experimental Investigation on a Non-Contact Method for the Measurements of Creep Properties of Ultra-High-Temperature Materials

    Science.gov (United States)

    Lee, Jonghyun; Hyers, Robert W.; Rogers, Jan R.; Rathz, Thomas J.; Choo, Hahn; Liaw, Peter

    2006-01-01

    Responsive access to space requires re-use of components such as rocket nozzles that operate at extremely high temperatures. For such applications, new ultra-hightemperature materials that can operate over 2,000 C are required. At the temperatures higher than the fifty percent of the melting temperature, the characterization of creep properties is indispensable. Since conventional methods for the measurement of creep is limited below 1,700 C, a new technique that can be applied at higher temperatures is strongly demanded. This research develops a non-contact method for the measurement of creep at the temperatures over 2,300 C. Using the electrostatic levitator in NASA MSFC, a spherical sample was rotated to cause creep deformation by centrifugal acceleration. The deforming sample was captured with a digital camera and analyzed to measure creep deformation. Numerical and analytical analyses have also been conducted to compare the experimental results. Analytical, numerical, and experimental results showed a good agreement with one another.

  8. Application of CTLM method combining interfacial structure characterization to investigate contact formation of silver paste metallization on crystalline silicon solar cells

    Science.gov (United States)

    Xiong, Shenghu; Yuan, Xiao; Tong, Hua; Yang, Yunxia; Liu, Cui; Ye, Xiaojun; Li, Yongsheng; Wang, Xianhao; Luo, Lan

    2018-04-01

    Circular transmission line model (CTLM) measurements were applied to study the contact formation mechanism of the silver paste metallization on n-type emitter of crystalline silicon solar cells. The electrical performance parameters ρc,Rsk , and Lt , which are related to the physical and chemical states of the multiphase materials at the interface, were extracted from the CTLM measurements, and were found to be sensitive to sintering temperature. As the temperature increased from 585 °C to 780 °C, initially the ρc value decreased rapidly, then flattened out and increased slightly. The order of resistivity magnitude was restricted by the SiNx passivation layer in the early sintering stages, and relied on the carrier tunneling probability affected by the precipitated silver crystallites or colloids, emitter doping concentration and molten glass layer. Based on the calculations that the sheet resistance underneath the electrode was reduced form 110 Ω / □ to 0.186 Ω / □ , it could be inferred that there was formation of a highly conductive layer of silver crystallites and colloids contained glass on the emitter. The transfer length Lt exhibited a U-shaped variation along with the temperature, reflecting the variation of the interfacial electrical properties. Overall, this article shows that the CTLM method can become a new powerful tool for researchers to meet the challenges of silver paste metallization innovation for manufacturing high-efficiency silicon solar cells.

  9. Childhood maltreatment, juvenile disorders and adult post-traumatic stress disorder: a prospective investigation.

    Science.gov (United States)

    Breslau, N; Koenen, K C; Luo, Z; Agnew-Blais, J; Swanson, S; Houts, R M; Poulton, R; Moffitt, T E

    2014-07-01

    We examine prospectively the influence of two separate but potentially inter-related factors in the etiology of post-traumatic stress disorder (PTSD): childhood maltreatment as conferring a susceptibility to the PTSD response to adult trauma and juvenile disorders as precursors of adult PTSD. The Dunedin Multidisciplinary Health and Development Study (DMHDS) is a birth cohort (n = 1037) from the general population of New Zealand's South Island, with multiple assessments up to age 38 years. DSM-IV PTSD was assessed among participants exposed to trauma at ages 26-38. Complete data were available on 928 participants. Severe maltreatment in the first decade of life, experienced by 8.5% of the sample, was associated significantly with the risk of PTSD among those exposed to adult trauma [odds ratio (OR) 2.64, 95% confidence interval (CI) 1.16-6.01], compared to no maltreatment. Moderate maltreatment, experienced by 27.2%, was not associated significantly with that risk (OR 1.55, 95% CI 0.85-2.85). However, the two estimates did not differ significantly from one another. Juvenile disorders (ages 11-15), experienced by 35% of the sample, independent of childhood maltreatment, were associated significantly with the risk of PTSD response to adult trauma (OR 2.35, 95% CI 1.32-4.18). Severe maltreatment is associated with risk of PTSD response to adult trauma, compared to no maltreatment, and juvenile disorders, independent of earlier maltreatment, are associated with that risk. The role of moderate maltreatment remains unresolved. Larger longitudinal studies are needed to assess the impact of moderate maltreatment, experienced by the majority of adult trauma victims with a history of maltreatment.

  10. The stressor criterion in DSM-IV posttraumatic stress disorder: an empirical investigation.

    Science.gov (United States)

    Breslau, N; Kessler, R C

    2001-11-01

    The DSM-IV two-part definition of posttraumatic stress disorder (PTSD) widened the variety of stressors (A1) and added a subjective component (A2). The effects of the revised stressor criterion on estimates of exposure and PTSD in a community sample are evaluated. A representative sample of 2181 persons in southeast Michigan were interviewed about lifetime history of traumatic events and PTSD. The evaluation of the revised two-part definition is based on a randomly selected sample of events that represents the total pool of traumatic events experienced in the community. The enlarged definition of stressors in A1 increased the total number of events that can be used to diagnose PTSD by 59%. The majority of A1 events (76.6%) involved the emotional response in A2. Females were more likely than males to endorse A2 (adjusted odds ratio = 2.66; 95% confidence interval 1.92, 3.71). Of all PTSD cases resulting from the representative sample of events, 38% were attributable to the expansion of qualifying events in A1. The identification of exposures that lead to PTSD were not improved materially by A2 however, events that did not involve A2 rarely resulted in PTSD. Compared to previous definitions, the wider variety of stressors in A1 markedly increased the number of events experienced in the community that can be used to diagnose PTSD. Furthermore, A2 might be useful as a separate criterion, an acute response necessary for the emergence of PTSD, and might serve as an early screen for identifying a subset of recently exposed persons at virtually no risk for PTSD. The utility of A2 as a screen must be tested prospectively.

  11. A longitudinal fMRI investigation in acute post-traumatic stress disorder (PTSD).

    Science.gov (United States)

    Ke, Jun; Zhang, Li; Qi, Rongfeng; Li, Weihui; Hou, Cailan; Zhong, Yuan; He, Zhong; Li, Lingjiang; Lu, Guangming

    2016-11-01

    Background Neuroimaging studies have implicated limbic, paralimbic, and prefrontal cortex in the pathophysiology of chronic post-traumatic stress disorder (PTSD). However, little is known about the neural substrates of acute PTSD and how they change with symptom improvement. Purpose To examine the neural circuitry underlying acute PTSD and brain function changes during clinical recovery from this disorder. Material and Methods Nineteen acute PTSD patients and nine non-PTSD subjects who all experienced a devastating mining accident underwent clinical assessment as well as functional magnetic resonance imaging (fMRI) scanning while viewing trauma-related and neutral pictures. Two years after the accident, a subgroup of 17 patients completed a second clinical evaluation, of which 13 were given an identical follow-up scan. Results Acute PTSD patients demonstrated greater activation in the vermis and right posterior cingulate, and greater deactivation in the bilateral medial prefrontal cortex and inferior parietal lobules than controls in the traumatic versus neutral condition. At follow-up, PTSD patients showed symptom reduction and decreased activation in the right middle frontal gyrus, bilateral posterior cingulate/precuneus, and cerebellum. Correlation results confirmed these findings and indicated that brain activation in the posterior cingulate/precuneus and vermis was predictive of PTSD symptom improvement. Conclusion The findings support the involvement of the medial prefrontal cortex, inferior parietal lobule, posterior cingulate, and vermis in the pathogenesis of acute PTSD. Brain activation in the vermis and posterior cingulate/precuneus appears to be a biological marker of recovery potential from PTSD. Furthermore, decreased activation of the middle frontal gyrus, posterior cingulate/precuneus, and cerebellum may reflect symptom improvement.

  12. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... One Use Facts About Colored Contacts and Halloween Safety Colored Contact Lens Facts Over-the-Counter Costume ... Costume Contact Lenses Can Ruin Vision Eye Makeup Safety In fact, it is illegal to sell colored ...

  13. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... One Use Facts About Colored Contacts and Halloween Safety Colored Contact Lens Facts Over-the-Counter Costume ... use of colored contact lenses , from the U.S. Food and Drug Administration (FDA). Are the colored lenses ...

  14. 19 mm sized bileaflet valve prostheses' flow field investigated by bidimensional laser Doppler anemometry (part II: maximum turbulent shear stresses)

    Science.gov (United States)

    Barbaro, V; Grigioni, M; Daniele, C; D'Avenio, G; Boccanera, G

    1997-11-01

    The investigation of the flow field generated by cardiac valve prostheses is a necessary task to gain knowledge on the possible relationship between turbulence-derived stresses and the hemolytic and thrombogenic complications in patients after valve replacement. The study of turbulence flows downstream of cardiac prostheses, in literature, especially concerns large-sized prostheses with a variable flow regime from very low up to 6 L/min. The Food and Drug Administration draft guidance requires the study of the minimum prosthetic size at a high cardiac output to reach the maximum Reynolds number conditions. Within the framework of a national research project regarding the characterization of cardiovascular endoprostheses, an in-depth study of turbulence generated downstream of bileaflet cardiac valves is currently under way at the Laboratory of Biomedical Engineering of the Istituto Superiore di Sanita. Four models of 19 mm bileaflet valve prostheses were used: St Jude Medical HP, Edwards Tekna, Sorin Bicarbon, and CarboMedics. The prostheses were selected for the nominal Tissue Annulus Diameter as reported by manufacturers without any assessment of valve sizing method, and were mounted in aortic position. The aortic geometry was scaled for 19 mm prostheses using angiographic data. The turbulence-derived shear stresses were investigated very close to the valve (0.35 D0), using a bidimensional Laser Doppler anemometry system and applying the Principal Stress Analysis. Results concern typical turbulence quantities during a 50 ms window at peak flow in the systolic phase. Conclusions are drawn regarding the turbulence associated to valve design features, as well as the possible damage to blood constituents.

  15. Investigation of smooth specimen scc test procedures; variations in environment, specimen size, stressing frame, and stress state. [for high strength aluminum alloys

    Science.gov (United States)

    Lifka, B. W.; Sprowls, D. O.; Kelsey, R. A.

    1975-01-01

    The variables studied in the stress-corrosion cracking performance of high strength aluminum alloys were: (1) corrosiveness of the environment, (2) specimen size and stiffness of the stressing system, (3) interpretation of transgranular cracking, and (4) interaction of the state of stress and specimen orientation in a product with an anisotropic grain structure. It was shown that the probability of failure and time to fracture for a specimen loaded in direct tension are influenced by corrosion pattern, the stressing assembly stiffness, and the notch tensile strength of the alloy. Results demonstrate that the combination of a normal tension stress and a shear stress acting on the plane of maximum susceptibility in a product with a highly directional grain cause the greatest tendency for stress-corrosion cracking.

  16. Self-Care for Nurse Leaders in Acute Care Environment Reduces Perceived Stress: A Mixed-Methods Pilot Study Merits Further Investigation.

    Science.gov (United States)

    Dyess, Susan Mac Leod; Prestia, Angela S; Marquit, Doren-Elyse; Newman, David

    2018-03-01

    Acute care practice settings are stressful. Nurse leaders face stressful demands of numerous competing priorities. Some nurse leaders experience unmanageable stress, but success requires self-care. This article presents a repeated measures intervention design study using mixed methods to investigate a self-care simple meditation practice for nurse leaders. Themes and subthemes emerged in association with the three data collection points: at baseline (pretest), after 6 weeks, and after 12 weeks (posttest) from introduction of the self-care simple meditation practice. An analysis of variance yielded a statistically significant drop in perceived stress at 6 weeks and again at 12 weeks. Conducting future research is merited.

  17. 4D stress evolution models of the San Andreas Fault System: Investigating time- and depth-dependent stress thresholds over multiple earthquake cycles

    Science.gov (United States)

    Burkhard, L. M.; Smith-Konter, B. R.

    2017-12-01

    4D simulations of stress evolution provide a rare insight into earthquake cycle crustal stress variations at seismogenic depths where earthquake ruptures nucleate. Paleoseismic estimates of earthquake offset and chronology, spanning multiple earthquakes cycles, are available for many well-studied segments of the San Andreas Fault System (SAFS). Here we construct new 4D earthquake cycle time-series simulations to further study the temporally and spatially varying stress threshold conditions of the SAFS throughout the paleoseismic record. Interseismic strain accumulation, co-seismic stress drop, and postseismic viscoelastic relaxation processes are evaluated as a function of variable slip and locking depths along 42 major fault segments. Paleoseismic earthquake rupture histories provide a slip chronology dating back over 1000 years. Using GAGE Facility GPS and new Sentinel-1A InSAR data, we tune model locking depths and slip rates to compute the 4D stress accumulation within the seismogenic crust. Revised estimates of stress accumulation rate are most significant along the Imperial (2.8 MPa/100yr) and Coachella (1.2 MPa/100yr) faults, with a maximum change in stress rate along some segments of 11-17% in comparison with our previous estimates. Revised estimates of earthquake cycle stress accumulation are most significant along the Imperial (2.25 MPa), Coachella (2.9 MPa), and Carrizo (3.2 MPa) segments, with a 15-29% decrease in stress due to locking depth and slip rate updates, and also postseismic relaxation from the El Mayor-Cucapah earthquake. Because stress drops of major strike-slip earthquakes rarely exceed 10 MPa, these models may provide a lower bound on estimates of stress evolution throughout the historical era, and perhaps an upper bound on the expected recurrence interval of a particular fault segment. Furthermore, time-series stress models reveal temporally varying stress concentrations at 5-10 km depths, due to the interaction of neighboring fault

  18. An investigation into the impact of cryogenic environment on mechanical stresses in FRP composites

    Science.gov (United States)

    Fifo, O.; Basu, B.

    2015-07-01

    Fibre reinforced polymer (FRP) composites are fast becoming a highly utilised engineering material for high performance applications due to their light weight and high strength. Carbon fibre and other high strength fibres are commonly used in design of aerospace structures, wind turbine blades, etc. and potentially for propellant tanks of launch vehicles. For the aforementioned fields of application, stability of the material is essential over a wide range of temperature particularly for structures in hostile environments. Many studies have been conducted, experimentally, over the last decade to investigate the mechanical behaviour of FRP materials at varying subzero temperature. Likewise, tests on aging and cycling effect (room to low temperature) on the mechanical response of FRP have been reported. However, a relatively lesser focused area has been the mechanical behaviour of FRP composites under cryogenic environment. This article reports a finite element method of investigating the changes in the mechanical characteristics of an FRP material when temperature based analysis falls below zero. The simulated tests are carried out using a finite element package with close material properties used in the cited literatures. Tensile test was conducted and the results indicate that the mechanical responses agree with those reported in the literature sited.

  19. In Situ Investigation of the Evolution of Lattice Strain and Stresses in Austenite and Martensite During Quenching and Tempering of Steel

    DEFF Research Database (Denmark)

    Villa, M.; Niessen, F.; Somers, M. A. J.

    2018-01-01

    Energy dispersive synchrotron X-ray diffraction was applied to investigate in situ the evolution of lattice strains and stresses in austenite and martensite during quenching and tempering of a soft martensitic stainless steel. In one experiment, lattice strains in austenite and martensite were...... measured in situ in the direction perpendicular to the sample surface during an austenitization, quenching, and tempering cycle. In a second experiment, the sin2ψ method was applied in situ during the austenite-to-martensite transformation to distinguish between macro- and phase-specific micro......-stresses and to follow the evolution of these stresses during transformation. Martensite formation evokes compressive stress in austenite that is balanced by tensile stress in martensite. Tempering to 748 K (475 °C) leads to partial relaxation of these stresses. Additionally, data reveal that (elastic) lattice strain...

  20. Stressors, Appraisal of Stressors, Experienced Stress and Cardiac Response: A Real-Time, Real-Life Investigation of Work Stress in Nurses.

    Science.gov (United States)

    Johnston, Derek; Bell, Cheryl; Jones, Martyn; Farquharson, Barbara; Allan, Julia; Schofield, Patricia; Ricketts, Ian; Johnston, Marie

    2016-04-01

    Stress in health care professionals may reflect both the work and appraisal of work and impacts on the individuals, their patients, colleagues and managers. The purpose of the present study is to examine physiological and psychological effects of stressors (tasks) and theory-based perceptions of work stressors within and between nurses in real time. During two work shifts, 100 nurses rated experienced stress, affect, fatigue, theory-based measures of work stress and nursing tasks on electronic diaries every 90 min, whereas heart rate and activity were measured continuously. Heart rate was associated with both demand and effort. Experienced stress was related to demand, control, effort and reward. Effort and reward interacted as predicted (but only within people). Results were unchanged when allowance was made for work tasks. Real-time appraisals were more important than actual tasks in predicting both psychological and physiological correlates of stress. At times when effort was high, perceived reward reduced stress.